Commit 954509f added a security fix for CVE-2017-8779, involving
pairing all svc_getargs() calls with svc_freeargs() to avoid a memory
leak. However it also introduced a couple of issues:
- The call to svc_freeargs() from rpcbproc_callit_com() may result in
an attempt to free static memory, resulting in undefined behaviour.
- A typo in the svc_freeargs() call from pmapproc_dump() causes NIS
(aka ypbind) to fail.
Backport upstream fixes for these issues to version 0.2.3.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 5a9a95d0eb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The iputils executables are installed without the setuid bit set,
which prevents some programs from working.
This patch adds a permission table to fix the permissions of the ping
and traceroute6 executables.
Signed-off-by: Einar Jon Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit b0e2d00289)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libatomic, like libgcc_s, is provided by gcc, so there is no reason to
copy it over only for the glibc and uclibc cases, it should also be
copied for the musl case. Without this, a program linked with
libatomic on a musl system will fail to run due to the missing
library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit ece9385523)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot's "make nconfig" command stopped working a while ago on
Gentoo systems. Running the command would result in a crash.
The issue is caused by lxdialog's cflags which are also used to build
nconfig; It would detect *ncursesw* and turn on WIDECHAR support --
but the Makefile would still link to plain *ncurses* while building
nconfig (which was built without WIDECHAR support).
This would cause a crash after using *wattrset* on a WINDOW instance.
WIDECHAR *wattrset* would try to set the _color member in the WINDOW
struct which does not exist in the NON-WIDECHAR ncurses instance. It
would end up clobbering data outside the struct (usually _line entries).
An upstream patch fixes the issue, so we're applying it to Buildroot's
kconfig.
Signed-off-by: Guillermo A. Amaral <g@maral.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 8aa4ee2b02)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only busybox and sysvinit handle the BR2_TARGET_GENERIC_GETTY_TERM and
BR2_TARGET_GENERIC_GETTY_OPTIONS options; the other init systems do
not.
So, protect those options behind appropriate dependencies on busybox
or sysvinit.
Fixes#10301.
Reported-by: Michael Heinemann <posted@heine.so>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 5e23eb5da7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10216
Building mcookie generates a warning about possible wrong arguments to
memset:
mcookie.c:207:26: warning: argument to ‘sizeof’ in ‘memset’ call is the same expression
as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess]
memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */
ctx is a pointer to a structure, so the code should use the size of the
structure and not the size of the pointer when it tries to clear the
structure, similar to how it got fixed upstream back in 2009:
https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/lib/md5.c?id=6596057175c6ed342dc20e85eae8a42eb29b629f
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 40f4191f2a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to commit 8ad38a4fc2
("package/lz4: bump version to r131"), the lz4 package was installing
both libraries and programs, but this commit changed the behavior to
only install libraries.
The contributor might have been confused by the fact that the build
command was "$(MAKE) ... -C $(@D) liblz4", suggesting that only the
library was built. But since the install command was "$(MAKE) ... -C
$(@D) install", the programs were effectively built as part of the
install step, and installed as well.
Since it makes sense for lz4 to also installs its programs, this
commit adjusts the package accordingly.
It is worth mentioning that using the "all" target during the build
step is important. Indeed, otherwise the programs/Makefile has a
"default" target that doesn't build everything (especially the lz4c
program) and it end up being built as part of the install step, due to
how the makefile dependencies are handled in the lz4 project. To make
sure that everything gets built during the build step, we explicitly
use the "all" target.
Fixes bug #9996
Reported-by: Jamin Collins <jamin.collins@gmail.com>
Initial-analysis-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6f1c11f79a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current busybox.mk explicitly removes S01logging if CONFIG_SYSLOGD
is disabled in the Busybox configuration. However:
- This causes the removal of the S01logging script potentially
installed by another package (currently syslog-ng, rsyslog and
sysklogd can all install a S01logging script).
- We generally don't try to clean-up stuff that we may have installed
in a previous make invocation and that is no longer needed
following a configuration change.
Fixes bug #10176
Reported-by: Karl Krach <mail@kkrach.de>
Fix-provided-by: Karl Krach <mail@kkrach.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 84e835ea92)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kmsxx build system can only build either shared libraries *or*
static libraries, not both. Therefore, the build currently fails when
BR2_SHARED_STATIC_LIBS=y because we try to install the static
libraries, that haven't been built.
We fix this by not installing the static libraries when
BR2_SHARED_STATIC_LIBS=y, making BR2_SHARED_STATIC_LIBS=y essentially
the same as BR2_SHARED_LIBS=y for this package.
Fixes bug #10331.
Reported-by: Frederic MATHIEU <frederic.mathieu@dualis.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 28d5ca9c96)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains mitigations for CVE-2017-5753 and CVE-2017-5715, the
vulnerabilities known as the "Spectre" attack. It also contains a fix
which allows building the reference documentation with newer gtk-doc
versions.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/01/10/webkitgtk2.18.5-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4c5bc08ba3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* AST-2017-014: Crash in PJSIP resource when missing a contact header A
select set of SIP messages create a dialog in Asterisk. Those SIP
messages must contain a contact header. For those messages, if the header
was not present and using the PJSIP channel driver, it would cause
Asterisk to crash. The severity of this vulnerability is somewhat
mitigated if authentication is enabled. If authentication is enabled a
user would have to first be authorized before reaching the crash point.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-13185-1475-1515-and-1318-cert2-now-available-security
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 4f13dc362d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10556
The --with-crypto handling in ntp only works with libopenssl, not with
libressl, where it ends up with compilation issues like:
ntp_control.c:(.text+0x64): undefined reference to `EVP_MD_CTX_new'
ntp_control.c:(.text+0x10c): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `bighash':
ntp_crypto.c:(.text+0x2e8): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x328): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `crypto_verify':
ntp_crypto.c:(.text+0x6cc): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x710): undefined reference to `EVP_MD_CTX_free'
ntp_crypto.c:(.text+0x72c): undefined reference to `EVP_MD_CTX_free'
So ensure we only pass --with-crypto when libopenssl is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 522111f81c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
14.6.1:
* AST-2017-005 (applied to all released versions): The "strictrtp" option in
rtp.conf enables a feature of the RTP stack that learns the source address
of media for a session and drops any packets that do not originate from
the expected address. This option is enabled by default in Asterisk 11
and above. The "nat" and "rtp_symmetric" options for chan_sip and
chan_pjsip respectively enable symmetric RTP support in the RTP stack.
This uses the source address of incoming media as the target address of
any sent media. This option is not enabled by default but is commonly
enabled to handle devices behind NAT.
A change was made to the strict RTP support in the RTP stack to better
tolerate late media when a reinvite occurs. When combined with the
symmetric RTP support this introduced an avenue where media could be
hijacked. Instead of only learning a new address when expected the new
code allowed a new source address to be learned at all times.
If a flood of RTP traffic was received the strict RTPsupport would allow
the new address to provide media and with symmetric RTP enabled outgoing
traffic would be sent to this new address, allowing the media to be
hijacked. Provided the attacker continued to send traffic they would
continue to receive traffic as well.
* AST-2017-006 (applied to all released versions): The app_minivm module has
an “externnotify” program configuration option that is executed by the
MinivmNotify dialplan application. The application uses the caller-id
name and number as part of a built string passed to the OS shell for
interpretation and execution. Since the caller-id name and number can
come from an untrusted source, a crafted caller-id name or number allows
an arbitrary shell command injection.
* AST-2017-007 (applied only to 13.17.1 and 14.6.1): A carefully crafted URI
in a From, To or Contact header could cause Asterisk to crash
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11252-13171-1461-116-cert17-1313-cert5-now-available-security
14.6.2:
* AST-2017-008: Insufficient RTCP packet validation could allow reading
stale buffer contents and when combined with the “nat” and “symmetric_rtp”
options allow redirecting where Asterisk sends the next RTCP report.
The RTP stream qualification to learn the source address of media always
accepted the first RTP packet as the new source and allowed what
AST-2017-005 was mitigating. The intent was to qualify a series of
packets before accepting the new source address.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11253-13172-1462-116-cert18-1313-cert6-now-available-security
Drop 0004-configure-in-cross-complation-assimne-eventfd-are-av.patch as this
is now handled differently upstream (by disabling eventfd for cross
compilation, see commit 2e927990b3d2 (eventfd: Disable during cross
compilation)). If eventfd support is needed then this should be submitted
upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 3f1d2c6c74)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the advisory (https://irssi.org/security/irssi_sa_2018_01.txt):
Multiple vulnerabilities have been located in Irssi.
(a) When the channel topic is set without specifying a sender, Irssi
may dereference NULL pointer. Found by Joseph Bisch. (CWE-476)
CVE-2018-5206 was assigned to this issue.
(b) When using incomplete escape codes, Irssi may access data beyond
the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5205 was assigned to this issue.
(c) A calculation error in the completion code could cause a heap
buffer overflow when completing certain strings. (CWE-126) Found
by Joseph Bisch.
CVE-2018-5208 was assigned to this issue.
(d) When using an incomplete variable argument, Irssi may access data
beyond the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5207 was assigned to this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit aebdb1cd4b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Verified experimentally by using exception_ptr with m68k_cf5208 and
looking at the value of ATOMIC_INT_LOCK_FREE. ATOMIC_INT_LOCK_FREE=1,
so the issue is present. Also verified that gcc 7.x fixed it also for
cf5208.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 98b3b83fb5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Autotools-based packages that do not need C++ but check for it, and use
libtool, will fail to configure on distros that lack /lib/cpp.
This is the case for example on Arch Linux, where expat fails to build
with:
configure: error: in `/home/dkc/src/buildroot/build/build/expat-2.2.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This is because libtool uses AC_PROC_CXXCPP, which can not be avoided,
and does require a cpp that passes some "sanity" checks (does not choke
on valid input, but does choke on invalid input). So we can use neither
/bin/false nor /bin/true...
We instead need something that can digest some basic C++ preprocessor
input. We can't use the target preprocessor: that does not work, because
it obviously has no C++ cupport:
arm-linux-cpp.br_real: error: conftest.cpp: C++ compiler not
installed on this system
We can however consider that the host machine does have a C++ compiler,
so we use the host' cpp, which is gcc's compiler wrapper that ends up
calling the host's C++ preprocessor.
That would give us a valid C++ preprocessor when we don't have one, in
fact. But autotools will then correctly fail anyway, because there is
indeed no C++ compiler at all, as we can see in this excerpt of a
configure log from expat:
checking whether we are using the GNU C++ compiler... no
checking whether false accepts -g... no
checking dependency style of false... none
checking how to run the C++ preprocessor... cpp
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
libtool.m4: error: problem compiling CXX test program
checking for false option to produce PIC... -DPIC
checking if false PIC flag -DPIC works... no
checking if false static flag works... no
checking if false supports -c -o file.o... no
checking if false supports -c -o file.o... (cached) no
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
So, using the host's C++ preprocessor (by way of gcc's wrapper) leads to
a working situation, where the end result is as expected.
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit bd39d11d2e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make sure that the pie charts produced by 'graph-build' and 'graph-size'
targets are sorted on the size of each piece of the pie. Otherwise, making
visual analysis is difficult, as one needs to look at the legends of each
piece and do the sorting manually in their head.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit a3f37c53d5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If we don't explicitly disable SELinux support in the host-tar build,
it might pick up system-wide installed SELinux libraries, causing the
tar in HOST_DIR/bin/ to depend on the host SELinux libraries, which is
not desirable to make the SDK portable/relocatable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 121807c089)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
First, the .pc file was so far fixed as a post-configure hook of the
matchbox-fakekey package, by directly tweaking the .pc file installed in
staging by matchbox-lib. That's uterly wrong and bad.
So, we move the fix to matchbox-lib.
Second, it was incorreclty tweaking the .pc file when xlib_libXft was
not enabled, because only then a path to staging was present.
Third, even when xlib_libXft was enabled, the tweaking was still wrong,
because unnecessary.
Fix all that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 84a2645e5b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
matchbox-lib build-depends on xlib_libXext, but forgets to select it.
It also build-depends on expat without selecting it, but it does need
it.
Fix that: select xlib_libXext, remove expat.
Add myself to developpers for matchbox packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 2cfda4704e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump mfgtools to include the fix [1] for the C++ build issue reported
by the autobuilders.
This bump include only 4 small commits fixing memory leak and this
build issue.
Remove CPOL.htm (removed upstream) from MFGTOOLS_LICENSE_FILES but CPOL
license is still valid.
Add the README.txt file to MFGTOOLS_LICENSE_FILES since it contains
licensing informations:
Licenses:
- CPOL: MfgToolLib/XmlLite.CPP and XmlLite.h
- BSD: Others.
Add license file hash.
[1] b370a43e54
Fixes:
http://autobuild.buildroot.net/results/7c2bbbe13ab315684f3502afd96958a76879b1d5
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 34c4c0680a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old SGI site is not accessible anymore. Use the link from the README
file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1fa2f7646f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains fixes for CVE-2017-13866, CVE-2017-13870, CVE-2017-7156, and
CVE-2017-13856. Additionally, this release brings improvements in the
WebDriver spec-compliance, plugs several memory leaks in its GStreamer based
multimedia backend, and fixes a bug when handling cookie removal.
Release notes can be found in the announcement:
https://webkitgtk.org/2017/12/19/webkitgtk2.18.4-released.html
More details about the security fixes are provided in the following
WebKitGTK+ Security Advisory report:
https://webkitgtk.org/security/WSA-2017-0010.html
Last but not least, this new release includes the fix for honoring the
CMAKE_BUILD_TYPE value from CMake toolchain files and the corresponding
patch is removed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fbf6a483e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-13672: QEMU (aka Quick Emulator), when built with the VGA display
emulator support, allows local guest OS privileged users to cause a denial
of service (out-of-bounds read and QEMU process crash) via vectors involving
display update.
CVE-2017-15118: Stack buffer overflow in NBD server triggered via long
export name
CVE-2017-15119: DoS via large option request
CVE-2017-15268: Qemu through 2.10.0 allows remote attackers to cause a
memory leak by triggering slow data-channel read operations, related to
io/channel-websock.c.
For more details, see the release announcement:
https://lists.nongnu.org/archive/html/qemu-devel/2017-12/msg03618.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit eb2b3df626)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This would make the unicode challenged menuconfig show something
sensible.
Split the sentence for the text to make sense.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5099c90939)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The receive_xattr function in xattrs.c in rsync 3.1.2 and 3.1.3-development
does not check for a trailing '\0' character in an xattr name, which allows
remote attackers to cause a denial of service (heap-based buffer over-read
and application crash) or possibly have unspecified other impact by sending
crafted data to the daemon.
For more details, see:
https://bugzilla.samba.org/show_bug.cgi?id=13112
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7f33f1d848)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The (deprecated) libsamplerate support is not enabled unless
--enable-samplerate is passed to configure. Fix this.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5b85c6a038)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Put together alsa-lib dependency and configure option code. As a side
effect we now avoid alsa-lib dependency when the required support in
alsa is missing.
Use positive logic.
Explicitly enable alsa support when available.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8a560563f9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ConsoleKit module is loaded by default from the default.pa
configuration file, but its initialization fails because Buildroot has
no ConsoleKit package yet. This breaks per-user pulseaudio daemon.
The default.pa configuration load module-console-kit only when it
exists. Remove module-console-kit to fix pulseaudio per-user startup.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 64dab3c672)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lldpd currently depends on a C++ compiler to configure properly, but
the package doesn't select that option, so builds fail if
BR2_TOOLCHAIN_BUILDROOT_CXX is not selected with following errors:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in `/home/dkc/src/buildroot/build-zii/build/lldpd-0.9.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This package actually builds fine without C++, so drop this check in
configure.ac. Attached patch has already been accepted upstream [1].
[1] https://github.com/vincentbernat/lldpd/pull/261
[Peter: adjust autoreconf comment]
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Reviewed-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 18c9cda6e4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-pycparser is mentioned in setup.py as install_requires, so
select it in Config.in.
As python-cffi will be installed with python-crossbar's dependencies,
remove it from python-crossbar's Config.in.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit a24153a73f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gdb install target installs dynamic versions of libbfd and
libopcode, accidentally overwriting the binutils provided versions
(gdb itself links against the bundled static ones to avoid
version problems, so the dynamic ones are un-needed).
Prevent the installation by using the '--disable-install-libbfd'
configure option.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit b54c793195)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes: https://mariadb.com/kb/en/mariadb-10129-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10129-changelog/
Fixes the following security vulnerabilities:
CVE-2017-10378 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.57 and earlier, 5.6.37 and earlier and 5.7.11 and earlier. Easily
exploitable vulnerability allows low privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or frequently
repeatable crash (complete DOS) of MySQL Server.
CVE-2017-10268 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Replication). Supported versions that are affected are
5.5.57 and earlier, 5.6.37 and earlier and 5.7.19 and earlier. Difficult to
exploit vulnerability allows high privileged attacker with logon to the
infrastructure where MySQL Server executes to compromise MySQL Server.
Successful attacks of this vulnerability can result in unauthorized access to
critical data or complete access to all MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e299197a2c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 0542bb79e8 (uboot: Support multiple environment source files),
missing user-supplied environment source files is no longer detected.
This is because we cat them all, and feed the concatenation to the stdin
of mkenvimage. So, if one source file is missing, the cat exits in error,
but the compound command exits with the exit code of the last command,
which is that of mkenvimage, which happens to be happy with whatever it
is fed on its stdin, even is empty.
We fix that by creating a temporary file, that we even leave afterward
for the user to inspect.
We also move it out of the _CMDS block and into a macro of its own, so
that it is easier to write and maintain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit c9b6604fa7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Various bugfixes, including a compat fix for <= 3.10.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6bfa6b2a04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
List of fixes from the 2.26 branch NEWS files:
CVE-2017-15670: The glob function, when invoked with GLOB_TILDE,
suffered from a one-byte overflow during ~ operator processing (either
on the stack or the heap, depending on the length of the user name).
Reported by Tim Rühsen.
CVE-2017-15671: The glob function, when invoked with GLOB_TILDE,
would sometimes fail to free memory allocated during ~ operator
processing, leading to a memory leak and, potentially, to a denial
of service.
CVE-2017-15804: The glob function, when invoked with GLOB_TILDE and
without GLOB_NOESCAPE, could write past the end of a buffer while
unescaping user names. Reported by Tim Rühsen.
CVE-2017-17426: The malloc function, when called with an object size near
the value SIZE_MAX, would return a pointer to a buffer which is too small,
instead of NULL. This was a regression introduced with the new malloc
thread cache in glibc 2.26. Reported by Iain Buclaw.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 971ed9653e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The HDF5 package is used by flann for testing purpose only and is
not part of buildroot packages. However, if present in the host, it will
be used and trigger the unsafe header/library path used in
cross-compilation error.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit f6ee339e92)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000405.
[Peter: drop 4.14.x bump]
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: adjust commit description to mention the CVE being fixed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 9f5178fa34)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building this defconfig
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_WESTON=y
BR2_PACKAGE_XORG7=y
is broken:
CC clients/weston_simple_dmabuf_drm-simple-dmabuf-drm.o
clients/simple-dmabuf-drm.c: In function 'create_display':
clients/simple-dmabuf-drm.c:758:15: warning: implicit declaration of function 'eglQueryString' [-Wimplicit-function-declaration]
extensions = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
^~~~~~~~~~~~~~
clients/simple-dmabuf-drm.c:758:30: error: 'EGL_NO_DISPLAY' undeclared (first use in this function)
extensions = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
^~~~~~~~~~~~~~
clients/simple-dmabuf-drm.c:758:30: note: each undeclared identifier is reported only once for each function it appears in
clients/simple-dmabuf-drm.c:758:46: error: 'EGL_EXTENSIONS' undeclared (first use in this function)
extensions = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
^~~~~~~~~~~~~~
clients/simple-dmabuf-drm.c:759:21: warning: implicit declaration of function 'weston_check_egl_extension' [-Wimplicit-function-declaration]
if (extensions && !weston_check_egl_extension(extensions,
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit be420d12f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since uboot 2017.09 path to dtc will be configured via Kconfig. As BR
skips this step for uboot-tools building one has to provide
CONFIG_MKIMAGE_DTC_PATH=dtc on the build command line. Otherwise
mkimage will not be able to create FIT images, i.e.:
mkimage -f kernel-fit.its kernel-fit.itb
will fail with very weird errors.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(cherry picked from commit 21ab88c417)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2017-8816: NTLM buffer overflow via integer overflow
- CVE-2017-8817: FTP wildcard out of bounds read
- CVE-2017-8818: SSL out of buffer access
For more details, see the changelog:
https://curl.haxx.se/changes.html#7_57_0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Spotted by check-package:
package/ndisc6/ndisc6.mk:14: possible typo: NDISC8_DEPENDENCIES -> *NDISC6*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rauc host tool (used to generate update bundles) runs mksquashfs so
host-squashfs is required for it to work at runtime.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages (ex: skeleton-init-systemd) have a zero size so we cannot
divide by the package size. In that case make their percent zero
explicitly and avoid a ZeroDivisionError exception.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the Buildroot tree is read-only, then cache.txt is copied read-only into
the build directory, and the configuration step fails. Fix this in the
same way we do in other places, by opening permissions as we copy the file
using $(INSTALL).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make WebKitGTK+ honor the value of CMAKE_BUILD_TYPE defined in the CMake
toolchain file by backporting the following upstream WebKit patch:
https://trac.webkit.org/changeset/225168
This reduces the generated binary sizes when building in "Release" mode
(BR2_ENABLE_DEBUG=n), for example when targeting ARMv8 the size reduction
is ~17 MiB.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libbsd is found by the configuration process, mtools unnecessarily
adds a NEEDED field with libbsd to its dynamic section, but it does not
actually use anything from libbsd under Linux. The same may happen to
host-mtools if some libbsd package is installed on the host machine.
Prevent this by forcing configure to bypass the checking for the
existence of a gethostbyname function in libbsd.
I stumbled on this problem when I built host-mtools and later removed
libbsd to upgrade to Fedora 27, due to Bug 1504831[1]. The previously
built host/bin/mtools started to fail due to the missing libbsd.so.0.
1. https://bugzilla.redhat.com/show_bug.cgi?id=1504831
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building the target google-breakpad requires building the host variant
of google-breakpad. Just like the target google-breakpad only supports
a limited number of architectures, it is the same for the host
google-breakpad.
We therefore introduce a
BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS option that is used
where necessary to prevent the user from choosing Google Breakpad when
building on unsupported host platforms.
Fixes:
http://autobuild.buildroot.net/results/c7c04483508f9e4d629efa54571afeb1feaa5f73/
(build on a powerpc64le machine)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is invisible because the timings make it excessively difficult to
hit, but the Makefile is inherently flawed for parallel build, as it
contains:
$(objects): atsc_psip_section.c atsc_psip_section.h
atsc_psip_section.c atsc_psip_section.h:
perl section_generate.pl atsc_psip_section.pl
and the perl script section_generate.pl will create both the .c and .h
files in one go, but given the construct above, there can be two such
script that run in parallel, which can clobber the generated .c and/or
.h files.
So, make dvb-apps a MAKE1 package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linphone can optionally use libupnp, so this dependency should be
accounted for in linphone.mk. In addition, linphone is not compatible
with libupnp18, but misdetects it as a a proper libupnp, causing a
build failure.
The build failure with libupnp18 currently only happens on the next
branch (because libupnp18 has only been added there), but adding the
optional dependency on libupnp makes sense for the master branch
anyway.
Fixes:
http://autobuild.buildroot.net/results/473c686f9bc5335d25b720cf1b0c45389138a7b4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to pdbg that fixes the build on the Blackfin
architecture. The build failure was due to the recently introduced
assembly code to embed the DTB into an object file. This code was not
taking into account the fact that Blackfin has a non-empty
__USER_LABEL_PREFIX__.
The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/2bf6f56303453fd2ba7e86882168d406ded4cc80/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of overriding the _svn command and injecting --non-interactive,
change the default value of BR2_SVN to include this flag so the end user
can choose not to use the flag.
This change helps users behind corporate system rules which may not
allow them to locally cache credentials and require interactive mode.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Originally implemented by]
CC: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, wayland support is enabled when the wayland package is
enabled, not when the FreeRDP wayland client is enabled.
But the dependency on libxkbcomon is only enforced from Config.in
when the FreeRDP wayland client is enabled., but is added to build
dependencies when the wayland package is enabled.
As such, we can end up in a situation where the FreeRDP wayland
client is disabled, the wayland package is enabled, and the
libxkbcommon package is also disabled, which casues the build to
fail with:
Makefile:539: *** libxkbcommon is in the dependency chain of
freerdp that has added it to its _DEPENDENCIES variable without
selecting it or depending on it from Config.in. Stop.
Change the build dependency to actually be on the FreeRDP client
being enabled.
Fixes;
http://autobuild.buildroot.net/results/dc3e11f7076a8355f3d2f9cb49c6325dcf7084bd
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
parted uses libiconv but doesn't link with it. Add a patch to add it
to LIBADD of the library that uses it. iconv was already checked in
configure.ac, but only if i18n is enabled, so the iconv check is also
added unconditionally in configure.ac.
Also add an optional dependency on libiconv, so it is reproducible.
This was not detected in the autobuilders, since it only occurs when
libiconv exists (otherwise uClibc stubs will be used). libiconv
depends on !BR2_ENABLE_LOCALE and parted depends on BR2_USE_WCHAR. We
don't have such a configuration in the autobuilders.
Upstream status: sent to mailing list
http://lists.alioth.debian.org/pipermail/parted-devel/2017-November/005131.html
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Sjoerd Venema <srg.venema@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bundled tinysvcmdns library is affected by CVE-2017-12087 [1]:
> An exploitable heap overflow vulnerability exists in the tinysvcmdns library
> version 2016-07-18. A specially crafted packet can make the library overwrite
> an arbitrary amount of data on the heap with attacker controlled values. An
> attacker needs send a dns packet to trigger this vulnerability.
shairport-sync has incorparated upstreams fixes in [2].
[1] https://bugs.launchpad.net/bugs/cve/2017-12087
[2] 1dbdf94811
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fiber module uses the cpu_relax() macro, for which the MIPS
implementation uses the "pause" instruction, only available since
mips32r2 and mips64r2. In order to avoid build failures on
mips32/mips64, we disallow the selection of the fiber module for such
architecture variants.
This solution was suggested by Arnout Vandecappelle.
Fixes:
http://autobuild.buildroot.net/results/0439790b6f472e3d4b2d5431a05aa5b408f62e56/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 3861ce09d0.
As reported on IRC, runc v1.0.0-rc4 is not compatible with the docker-engine
version we are using, so lets revert for 2017.11:
20:27 < eschu> It looks like 25 days ago buildroot had runc updated to
1.0.0-rc4, which breaks compatibility with the docker-engine
version 17.05. Is there somewhere issues like this are
reported? Or is it just expected on non-release versions of
buildroot?
20:47 < Jacmet> eschu: ahh, so the new runc doesn't work with the old
docker-engine? what kind of errors do you get exactly?
20:49 < eschu> Jacmet: yes, runc made a change from -console to
--console-socket, which results in "Incorrect Usage" error
"flag provided but not defined: -console"
20:51 < eschu> Jacmet: basically docker-engine 17.05 uses -console, but
support for that was cut off in runc around the first 1.0.0
versions. I'll check the patches out, or might just
downgrade to buildroot 2017.08 release
20:51 < agb> Jacmet: unfortunately this issue has hit a number of distributions
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877146
20:53 < Jacmet> agb: thanks. I'll send a revert for 2017.11 and hopefully
we can make progress on the other docker packages for
2018.02
Cc: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch to fix examples compile without OpenGL support, in
the Qt 5.9 version of qt5declarative.
Fixes [1]:
In file included from fbitem.h:49:0,
from mainwindow.cpp:42:
logo.h:52:11: error: 'GLfloat' does not name a type
const GLfloat *constData() const { return m_data.constData(); }
^
logo.h:57:15: error: 'GLfloat' has not been declared
void quad(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2, GLfloat x3, GLfloat y3, GLfloat x4, GLfloat y4);
^
[...]
Makefile:610: recipe for target '.obj/mainwindow.o' failed
make[5]: *** [.obj/mainwindow.o] Error 1
make[5]: Leaving directory '.../build/qt5declarative-5.9.2/examples/quick/quickwidgets/qquickviewcomparison'
Makefile:70: recipe for target 'sub-qquickviewcomparison-make_first' failed
make[4]: *** [sub-qquickviewcomparison-make_first] Error 2
make[4]: *** Waiting for unfinished jobs....
[1] http://autobuild.buildroot.net/results/cef4abbe043f3aaad03c73e07cfab9d24c3d0fc9
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch 'Don't include <xlocale.h>'.
Fixes Bug-10501 ([1]):
In file included from ./include/locale.h:1:0,
from /usr/include/libintl.h:103,
from ./include/libintl.h:2,
from glibc/locale/programs/charmap.c:25:
glibc/locale/locale.h:146:11: fatal error: xlocale.h: No such file or directory
# include <xlocale.h>
[1] https://bugs.busybox.net/show_bug.cgi?id=10501
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
- CVE-2017-14746:
All versions of Samba from 4.0.0 onwards are vulnerable to a use after
free vulnerability, where a malicious SMB1 request can be used to
control the contents of heap memory via a deallocated heap pointer. It
is possible this may be used to compromise the SMB server.
- CVE-2017-15275:
All versions of Samba from 3.6.0 onwards are vulnerable to a heap
memory information leak, where server allocated heap memory may be
returned to the client without being cleared.
There is no known vulnerability associated with this error, but
uncleared heap memory may contain previously used data that may help
an attacker compromise the server via other methods. Uncleared heap
memory may potentially contain password hashes or other high-value
data.
For more details, see the release notes:
https://www.samba.org/samba/history/samba-4.6.11.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since binutils commit 1a9ccd70f9a7 ("Fix the linker so that it will not
silently generate ELF binaries with invalid program headers. Fix readelf
to report such invalid binaries.") the behaviour has changed and
binutils tries to create a program header segment for which there is no
space. Thanks to Nicholas Piggin and his patch to Linux:
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=ff45000fcb56b5b0f
Cedric fixed this in kvm-unit-tests commit 95062c20790d ("powerpc: add
-n to LDFLAGS") so bump to that version.
Since the patch 0001-remove-werror.patch needs to be adjusted, we take
this opportunity to reformat is as a Git patch.
Fixes:
http://autobuild.buildroot.net/results/80825b492abf61313637b109d6a0944b38d5f739
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas: add necessary hash change, refresh patch that was not
applying anymore.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
boot.cmd using dts file instead of dtb which was
added in below commit, so fix the same.
"board: Add Bananapi M1 support"
(sha1: 5f50fb8d1d)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes the following build issue of libfastjson with old
enough compilers (4.8) and wchar disabled:
json_object.c: In function 'fjson_object_object_delete':
json_object.c:385:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0 ; i < FJSON_OBJECT_CHLD_PG_SIZE ; ++i) {
^
The code of libfastjson requires C99. If your compiler is recent
enough (gcc 5.x), then no problem, it is C99 by default, no additional
flags are needed.
If your compiler is older (for example gcc 4.8), then -std=c99 or
-std=gnu99 is explicitly needed to tell the compiler to accept C99
constructs. Testing the compiler for the availability of such flags is
done by libfastjson configure script. However, the test program used
by the configure script uses some wchar_t types, and therefore the
test checking for C99 availability fails on toolchains with wchar
disabled. From config.log:
configure:3928: checking for /home/test/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc option to accept ISO C99
[...]
configure:4077: /home/test/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc -std=gnu99 -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
conftest.c:54:3: error: unknown type name 'wchar_t'
const wchar_t *name;
^
So, just like we did in libv4l in commit
f01396a158 ("libv4l: fix uclibc-ng
configure/compile"), let's hint directly the configure script that it
should use -std=gnu99. This fixes the build of libfastjson with old
compilers and wchar disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is needed to get the autobuilders to use a toolchain that
includes the fix merged in 9d544feb8a
("fwup: fix for ARC toolchain").
In addition, this new toolchain version also fixes for real the RPATH
issue that should have been fixed by
f90f28a6df, but wasn't done properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 06a4975d4b (qt5: bump LTS version to 5.6.3) added an empty hash
for the 5.6.3 variant of qt5webkit, causing failures.
It also forgot to adjust the download URL as the qt5webkit tarballs are no
longer available under official_releases/ like the other submodules, but only
under community_releases/.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, ssl support is implicitely disabled in the initial configure
options. This overrides the check for openssl below.
libpjsip is also currently only compatible with libopenssl. Change
the check to LIBOPENSSL instead of openssl, and depend on libopenssl.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Contains a number of important fixes. From the relase notes:
https://lists.zx2c4.com/pipermail/wireguard/2017-November/001935.html
* netlink: plug memory leak
* qemu: check for memory leaks
There was a small memory leak on the netlink configuration layer that's now
been fixed.
* netlink: make sure we reserve space for NLMSG_DONE
A rather important change - due to an upstream kernel bug, that's existed
since the advent of netlink itself, sometimes wg(8) failed to receive valid
data back from kernelspace, resulting in "ENOBUFS" when trying to dump all
peers. This patch works around it while we wait for upstream to commit the
fix.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we do a full git clone of the repository, which takes quite
some time, especially on slow networks.
This was done like that because the initial patch was using the official
repository as the source of the download, and that repository did not
offer remotely-generated tarballs.
But now we've switched to using a mirror on github, which does provide
such a tarball, which provides faster downloads.
Use that.
However, the tarball from github differs from the one we were generating
locally, because the paths inside are different. WE used to create a
archive with paths starting with glibc-glibc-2.26-73-g4b692dfb95[...],
while github does away with the git-describe prefix, and generates paths
that start with just glibc-4b692dffb95[...]. The content are exactly
identicall (checked with a diff), though.
Update the hash accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 1e5a8916b2.
The idea was that the version string can be derived because we know the
package name.
However, this patch does not account for the fact that $(pkgname) always
points to the latest pacakge scanned, which in all other situation we're
using it, is the current package, because it is used inside one ot he
xxx-inner macros that are $(eval)ualed. So $(pkgname) is evaluated
"early" and gets the expected value.
However, the github value is not in one of those macros, so it gets
evaluated "late", when doing the actual download. So, by that time,
$(pkgname) will expand to the last package scanned, which is actuall the
manual (without a br2-external tree).
That would require that the _SITE variable be assigned with the :=
assignment operator. This is weird, because that would make it the only
variable to require that, but only when using the github helper, which
is even less obvious and would cause a lot of trouble...
The obvious fixup would seem to be to use $(PKG) instead, because that
already contains the upper-case package name that vcan be used as a
prefix to variables.
However, that does not work either, because we have a check that forbids
a trsailing slash in _SITE, check that is done in pacakge/pkg-generic,
inside the xxx-inner macro, during the $(eval) call.
And at that time, PKG is not yet defined, because it is only defined for
an actual recipe.
So we can't seem to have a workable solution. So, just revert the patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, FreeRDP uses pkg-config to find whether wayland is available.
When it is, it gets the CFLAGS and LDFLAGS and so on from pkg-config,
which is OK.
But I also gets the path to the wayland scanner from pkg-config. And
this points to the target one, when we really need the host one.
So we force-feed the correct path as a configure option.
Furthermore, wayland support needs libxkbcommon, so add this missing
dependency as well.
Fixes:
http://autobuild.buildroot.org/results/bdfe233ade36a56d0f65ef3c3d1698fca548beed/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only depend on host-pkgconf for gstreamer-0.x
However, we also need it at least for gstreamer-1.x and waylabnd, too.
But since FreeRDP is a cmake package, host-pkgconf is always pulled in
as a dependency by the cmake-package infrastructure.
So, drop the gstreamer-conditional host-pkgconf dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed the following security issues:
CVE-2017-0898: Buffer underrun vulnerability in Kernel.sprintf
CVE-2017-10784: Escape sequence injection vulnerability in the Basic
authentication of WEBrick
CVE-2017-14033: Buffer underrun vulnerability in OpenSSL ASN1 decode
CVE-2017-14064: Heap exposure in generating JSON
For more details, see the release notes:
https://www.ruby-lang.org/en/news/2017/09/14/ruby-2-4-2-released/
Drop now upstreamed rubygems patches and add hashes for the license files
while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING is enabeld,
wpa_supplicant currently fails to build with:
../src/common/sae.o: In function `sae_cn_confirm.isra.2':
sae.c:(.text+0x168): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x198): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ffc':
sae.c:(.text+0x214): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x22c): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ecc':
sae.c:(.text+0x2a4): undefined reference to `crypto_ec_point_to_bin'
sae.c:(.text+0x2c0): undefined reference to `crypto_ec_point_to_bin'
[...]
This is due to the fact that the SAE code, used for the mesh network
support, needs OpenSSL support. Therefore, we ensure that
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING selects OpenSSL. Only
OpenSSL is supported, which is why
BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected as well.
No changes to the .mk files are needed, because we were already
handling OpenSSL as an optional dependency.
This problem was not yet caught by the autobuilders.
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package includes some target-specific code that is irrelevant
in a host package but gets built anyway. The target for this code
must be one of the supported ChromeOS targets.
Supplied Makefile apparently relies on the environment to provide
a valid target, with a simple fallback to host arch. This breaks
the build if no value is provided and the host arch is not among
the supported ones.
Should fix
http://autobuild.buildroot.net/results/d118a83b6c4f7f910d0d44c279f36251d7ba29e8/
and similar failures.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All Buildroot pre-built toolchains have been rebuilt with Buildroot
2017.11-rc1, so that they have the latest version of
glibc/musl/uClibc, and also the latest gcc/binutils updates.
Specifically, this will fix the build failures on Blackfin that were
due to the missing accept4() support:
http://autobuild.buildroot.net/results/8b5a72dd7cde685f6f68f46aeee8b1b60c96d559/
(openobex)
http://autobuild.buildroot.net/results/b19dd9ed29944d7f79c6f824669e3baaa0bb045a/
(libiio)
In terms of changes to the toolchains:
- AArch64 glibc toolchain changed to use 4.4 kernel headers instead
of 4.1, in order to increase the variety of kernel header versions
being tested.
- Most configurations now use 4.13 kernel headers instead of 4.12
(except the configurations that were explicitly using an older
kernel headers version)
- The mips64 n64 configuration is changed from using gcc 4.9 to gcc
5, since another ARM configuration already tests gcc 4.9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the changelong:
Set the FD_CLOEXEC flag on sockets, so they are not "leaked" to
spawned processes
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-12172: Start scripts permit database administrator to modify
root-owned files.
CVE-2017-15098: Memory disclosure in JSON functions.
CVE-2017-15099: INSERT ... ON CONFLICT DO UPDATE fails to enforce SELECT
privileges.
See the announcement for more details:
https://www.postgresql.org/about/news/1801/
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains a minor rendering fix, another for the WebDriver
implementation, and security fixes for CVE-2017-13798, CVE-2017-13788,
and CVE-2017-13803.
Release notes:
https://webkitgtk.org/2017/11/10/webkitgtk2.18.3-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go-bootstrap is a host package that builds a first stage Go compiler,
later used to build the final Go compiler. However, this first stage
compiler only supports building on x86, x86-64 and arm as host
architectures, so we need to add the relevant architecture
dependencies to avoid having go-bootstrap built on other unsupported
platforms.
We do this by introducing BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS
in a new package/go-bootstrap/Config.in.host file. This option is then
used by BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS to make sure we can't enable
Go packages when the host architecture doesn't allow building the Go
compiler.
Fixes:
http://autobuild.buildroot.net/results/cbd419c6ab6fa8a6d18dc137c91f895867e53b8a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prosody configure script defines CFLAGS as -fPIC -Wall, but
because we pass our own CFLAGS, the -fPIC goes away, causing a build
failure when building shared libraries on x86-64:
/home/test/autobuild/run/instance-0/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-amd-linux-gnu/6.2.0/../../../../x86_64-amd-linux-gnu/bin/ld: encodings.o: relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC
So let's pass this -fPIC flag explicitly in CFLAGS. We don't bother
passing it conditionally !BR2_STATIC_LIBS because other packages (e.g
lua) also pass -fPIC unconditionally.
Fixes:
http://autobuild.buildroot.net/results/7f0eb285b75cdeacb21a1f9a9f64d2f0cbbf1d59/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent crypto handling change (commit 04a1031d3: package/libssh2: Add
selectable crypto libraries) had the unfortunate side effect that it no
longer automatically selects the most suitable crypto backend (E.G. one
where the dependency is already enabled), so all users not wanting to use
the mbedtls backend need to explicitly configure this.
Fix this by inverting the logic so the crypto backend sub options use
'depends on' their dependencies instead of 'select', so only the available
backends are displayed.
Like before, default to openssl if no crypto backend dependencies are
currently enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc doesn't implement __register_atfork() on noMMU systems, causing
a build failure of libressl. Since openssl is available as an
alternative on such platforms, we just disable libressl on
uClibc/noMMU systems.
Fixes:
/home/thomas/projets/buildroot/output/build/libressl-2.5.5/crypto/.libs/libcrypto.a(arc4random.o): In function `_rs_init.part.1':
arc4random.c:(.text+0x74): undefined reference to `__register_atfork'
collect2: error: ld returned 1 exit status
This build issue is not visible in the autobuilders, because libressl
is only selectable through a choice, which isn't randomized by the
autobuilder logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to 4.13.11 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ethtool has a configure script option allowing the enabling or disabling of
pretty printing for drivers, SFP modules etc which can save a significant
amount of bytes on the root filesystem. Allow selecting that, and turn it on by
default (like ethtool's configure script).
[Peter: fix Config.in indentation/style]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/49d/49dcec0bd2f3bb78c18675a9fa5c9c53cc183fd2/
g_cclosure_marshal_VOID__VOID is defined both in libgobject.a and
libgstreamer.a. It is probably possible to fix this, but gstreamer0.10
has been deprecated for a long time now and is anyway unlikely to be
used in static-only situations, so let's just require dynamic linking.
Propagate to the reverse dependencies. opencv3 already did depend on
dynamic libs.
[Peter: add autobuild reference]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We use the host compiler for x86-64 builds, so ensure it is only available
on x86-64 hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update kernel to 4.13 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/106/106af20196089e74c35daabdae46f030981600bd/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Passing extra jimtcl configure flags is unfortunately not forseen in the
usb_modeswitch Makefile, so add a small patch making this possible.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d13/d137680bf1c0ebfacef635cb2f0fc14524759143/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://github.com/libimobiledevice/libplist/blob/master/NEWS
This version bump fixes
* CVE-2017-6440
* CVE-2017-6439
* CVE-2017-6438
* CVE-2017-6437
* CVE-2017-6436
* CVE-2017-6435
* CVE-2017-5836
* CVE-2017-5835
* CVE-2017-5834
* CVE-2017-5545
* CVE-2017-5209
... and several others that didn't receive any CVE (yet).
The dependency to libxml2 was removed.
Autoreconf is not needed anymore, the upstream tarball includes a
configure script.
[Peter: also drop host-pkgconf dependency, only used for cython]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove --enable-abstract-sockets; dropped upstream. Remove
ac_cv_have_abstract_sockets that is dropped as well.
Remove --disable-selinux; we handle selinux as an optional dependency
below.
Remove --{enable,disable}-dnotify; this options has been removed in
version 1.7.6, broken since 2010.
Remove --with-init-scripts; dropped upstream.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel module git revision to make it work with Linux v4.13.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When multiple hooks are registred, both pre-a and post-command hooks'
foreach loops need to have a separator at the end in order for the
code to work as intended. Without the separator all hooks end up as a
one single line command thus making all but the first hook into
no-ops.
Fixes: 4628b6f3b4 ("fs: add pre- and post-command hooks")
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -m32 compiler flag is used for 32bit builds and the host tools have
limited architecture support. It may work in some situations (e.g.
on aarch64 host when building a 64-bit target), but it's equally likely
that it breaks and those situations are not tested. So just limit to
x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: explain that it may work in some situations]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -m32 compiler flag is used for 32bit builds and host-luajit has
limited architecture support. Building for a 32-bit target on a 32-bit
host should always work, but we haven't tested that and it's very
unlikely that someone needs it. So just limit to x86(-64) hosts.
Fixes:
http://autobuild.buildroot.net/results/5f5b5edb058efe976c003678e21bcc28a87cc828/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: clarify that it might work on 32-bit hosts for a 32-bit target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ti-gfx is provided as a x86 self extracting executable, so it is only
available on x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since version 3.0.0 protobuf is compatible with Python3, remove
Python2-only dependency.
It depends on python-six now, add this missing dependency.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When prefix is set to a path like /usr during crossbuild
the sed operations end up executing twice, once for the prefix
reassignment and another for includedir if it is set as a string
including the ${prefix} variable. This results in an issue
when the build directory is under /usr.
This patch updates the remaining location which uses the prefix
variable to also sed and update to use the real path.
Upstream bug report:
https://bugs.python.org/issue31713
Buildroot bug:
https://bugs.busybox.net/show_bug.cgi?id=10361
Fixes failures like the following:
dbus-python-1.2.4 | NOK | http://autobuild.buildroot.net/results/758858efa97b6273c1b470513f5492258a6d8853
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: refer to autobuild failures that still exist]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the selection of the backend is based on a priority order,
which is not always desirable: not all features are available for all
backends, as reported upstream:
https://github.com/libssh2/libssh2/issues/213
In that particular case, the problem is that libgcrypt is unable to
read encrypted certificates created with openssl, but it is likely
that other incompatibilities exist as well.
As such, allow a user to select the backend most appropriate to their
use-case.
Note that this changes the defaults: previously, if openssl was already
selected and we additionally select libssh2, openssl would be used as
a backend. Now, mbedtls is the default so if the user doesn't change
it, mbedtls will be used.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: remove now-unneeded comment in .mk file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-luajit has limited architecture support, and moarvm does not need
anything luajit specific - So use host-lua instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono to version 5.4.0.201 and monolite
to version 1050400003.
It also removes a patch not needed anymore.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add systemd start-up configuration for dhcpcd that is executed after
the network has been brought up.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many Buildroot users can not read Dutch. Although there is an English
version of this page, the github page looks more suitable as a link for
the software package itself, and the readme.md file is pretty
informative.
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 49a9fb0f13 removed the
BR2_PACKAGE_OPENOBEX_BLUEZ option, because BlueZ support is now
unconditionally included in OpenOBEX. Therefore, selecting this legacy
option no longer makes sense, and in fact triggers the legacy handling
for no reason.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Back in commit a662ff7e79
("package/argp-standalone: Fix build with c99 compilers"), we fixed
the build of argp-standalone with compilers defaulting to C99 inline
semantics, i.e starting from gcc 5.x.
This was done as part of a patch that used "inline" instead of "extern
inline". However, using "inline" once again broke the build with gcc
7.x. To fix this, revert back to using just "extern inline" (hence
removing a patch of patch 0003-fix_build_with_c99_compilers.patch) and
instead use -fgnu89-inline in the CFLAGS.
See https://gcc.gnu.org/gcc-5/porting_to.html for more details.
Fixes:
http://autobuild.buildroot.net/results/a9cedc54829b7bd2dd7ae6ff2bd6c6db242f1c35/
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: also drop the patch of
0003-fix_build_with_c99_compilers.patch that is no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update libssh2 to use the newest version from git. This caused a
transition from released version number to hash as it has not been
version rev'd in over a year (see issue
https://github.com/libssh2/libssh2/issues/220 for bump request).
This brings in changes to the autoconf to correctly pick the crypto
library.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the advisory:
http://www.openwall.com/lists/oss-security/2017/10/30/4
It was discovered that the bgpd daemon in the Quagga routing suite does
not properly calculate the length of multi-segment AS_PATH UPDATE
messages, causing bgpd to drop a session and potentially resulting in
loss of network connectivity.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix CVE-2016-2779: runuser in util-linux allows local users to escape to
the parent session via a crafted TIOCSTI ioctl call, which pushes
characters to the terminal's input buffer.
The new experimental "su --pty" feature has been implemented to fix this
issue. The feature is not enabled by default and the new command line
option --pty is necessary.
Add rfkill, a command for enabling and disabling wireless devices. This
implementation is based upon, and backward compatible with, the original
rfkill from Johannes Berg and Marcel Holtmann, currently provided by the
standalone "rfkill" package.
Add uuidparse, a command to analyze and print information about UUID's.
The "reset" script is not part of utill-linux anymore. Add a legacy
config telling the user to use either BusyBox or the ncurses program.
Drop the ncursesw patch, allready applied upstream. AUTORECONF is not
required anymore.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug fix release:
- correctly handle signal interrupts when polling in gpiod_simple_event_loop()
- fix the linking order when building with static libraries
- pass the correct consumer string to gpiod_simple_get_value_multiple() in
gpioget
- fix a line test case: don't use open-drain or open-source flags for input
mode
- fix the flags passed to ar in order to supress a build warning
- set the last error code in gpiod_chip_open_by_label() to ENOENT if a chip
can't be found
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
swupdate 2017.07 has a bug which makes hash verification faulty.
The commit adds a patch to fix the issue. The fix has already been
pushed to upstream and is a copy of the commit
dba95dcd3739c604a81ffa2df2545e7a4cd430cf in the swupdate repo [1].
[1] https://github.com/sbabic/swupdate
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of the cryptodev-linux version used in Buildroot is currently
broken for kernels >= 4.13. A fix was pushed upstream:
f0d69774af
This patch bumps the cryptodev-linux package version to use the latest
available one, which includes the commit fixing the build for recent
kernels.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The basic lvm2 package (libdevmapper / dmsetup) does build under musl, only the
standard (full) installation doesn't.
Many setups only need the basic package, so move the !musl dependencies down
to the sub options and adjust the reverse dependencies (cryptsetup/dmraid)
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: adjust Config.in comments and dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds 5_6_3 to the Timeline patch that fixed the build with
Qt 5.6.2.
Signed-off-by: Scott Ellis <scott@jumpnowtek.com>
[Thomas: adjust patch existing patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Open-source software for volunteer computing and grid computing.
Use the idle time on your computer to cure diseases, study global
warming, discover pulsars, and do many other types of scientific
research.
https://boinc.berkeley.edu
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Bernd:
- bumped to version 7.8.3
- removed patches which where applied upstream
- added myself to DEVELOPERS as well]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream socat2 branch seems to be dead. Last commit is from January
2016 . Over the last few years socat2 received only fixes cherry picked
from the master 1.x branch. Most major general purpose distros only
package socat 1.x.
Drop the threads dependency; not needed for 1.x.
Mention the OpenSSL exception in the license. Add hashes for license
files.
Correct the autoconf comment. The tarball configure script is recent
enough. But since we patch configure.in and Makefile.in we still need to
autoconf.
All patches we carry for socat2 are also needed for socat 1.x.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc upstream has ruled against doing regular point-releases, but they
do have a lot of interesting and important fixes for regressions and
security.
Backporting each patch, or cherry-picking individual patches is off
limits for us, so we just switch to using the currently-latest HEAD of
the maintenance branch instead.
The version number is obtained with:
$ git describe --match 'glibc-*' --abbrev=40 origin/release/2.26/master
The alternative options were:
- download the tarball from the git tree
--> does not work; not an option
- download the 2.26 tarball, and bundle the individual patches in
Buildroot
--> maintenance of patches is a burden; not an option
- download the 2.26 tarball, maintain the list of patches to download from
the git tree
--> not an option for the same reason
So we end up just doing a git clone. The git tree is today about ten
times the size of the tarball, so a rough estimate makes it at about ten
times the download time.
Also upstream doesn't officially provide an https download location [1].
There is one but it's not reliable, sometimes the connection time out and
end-up with a corrupted git repo:
fatal: unable to access 'https://sourceware.org/git/glibc.git/': Failed to connect to sourceware.org port 443: Connection timed out
So switch to using a git mirror from github which is updated once a day [2].
This allow at the same time to clone the git repository faster.
Note: The glibc 2.26 patches are not kept for the arc toolchain since they
are fixing an issue with the new float128 support introduced in x86, x86_64
and powerpc64le.
[1] https://sourceware.org/git/?p=glibc.git;a=summary
[2] https://github.com/bminor/glibc.git
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
[Romain: bump 4b692dffb95ac4812b161eb6a16113d7e824982e]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: update comment to never decide on the mirror]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reorganize so the optional composer option for the qt5wayland package shows up
as an indented option.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-13089: The http.c:skip_short_body() function is called in some
circumstances, such as when processing redirects. When the response is sent
chunked, the chunk parser uses strtol() to read each chunk's length, but
doesn't check that the chunk length is a non-negative number. The code then
tries to skip the chunk in pieces of 512 bytes by using the MIN() macro, but
ends up passing the negative chunk length to connect.c:fd_read(). As
fd_read() takes an int argument, the high 32 bits of the chunk length are
discarded, leaving fd_read() with a completely attacker controlled length
argument.
CVE-2017-13090: The retr.c:fd_read_body() function is called when processing
OK responses. When the response is sent chunked, the chunk parser uses
strtol() to read each chunk's length, but doesn't check that the chunk
length is a non-negative number. The code then tries to read the chunk in
pieces of 8192 bytes by using the MIN() macro, but ends up passing the
negative chunk length to retr.c:fd_read(). As fd_read() takes an int
argument, the high 32 bits of the chunk length are discarded, leaving
fd_read() with a completely attacker controlled length argument. The
attacker can corrupt malloc metadata after the allocated buffer.
Drop now upstreamed patch and change to .tar.lz as .tar.xz is no longer
available.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes; mostly for crashes and rendering issues, plus
one important fix for the layout or Arabic text.
Release notes:
https://webkitgtk.org/2017/10/27/webkitgtk2.18.2-released.html
Even though an acconpanying security advisory has not been published
for this release, the release contains fixes for several crashes (one
of them for the decoder of the very common GIF image format), which
arguably can be considered potential security issues.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-15906 - The process_open function in sftp-server.c in OpenSSH
before 7.6 does not properly prevent write operations in readonly mode,
which allows attackers to create zero-length files.
For more details, see the release notes:
https://www.openssh.com/txt/release-7.6
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.2.11 fixes important issues. From the release notes:
================================================================================
Redis 3.2.11 Released Thu Sep 21 15:47:53 CEST 2017
================================================================================
Upgrade urgency HIGH: Potentially critical bugs fixed.
AOF flush on SHUTDOWN did not cared to really write the AOF buffers
(not in the kernel but in the Redis process memory) to disk before exiting.
Calling SHUTDOWN during traffic resulted into not every operation to be
persisted on disk.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-2888 - An exploitable integer overflow vulnerability exists
when creating a new RGB Surface in SDL 2.0.5. A specially crafted file can
cause an integer overflow resulting in too little memory being allocated
which can lead to a buffer overflow and potential code execution. An
attacker can provide a specially crafted image file to trigger this
vulnerability.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d59/d5992dcc9a49ee77afaebdcc9448ac1868fa7de1/http://autobuild.buildroot.net/results/e89/e894f21ce1983ee3bd8d65a8e59e1adab9a62707/
The configure script automatically enables support for the raspberry pi
video backend if it detects the rpi-userland package. Unfortunately it
hardcodes a number of include/linker paths unsuitable for cross compilation,
breaking the build:
if test x$enable_video = xyes -a x$enable_video_rpi = xyes; then
..
RPI_CFLAGS="-I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux"
RPI_LDFLAGS="-L/opt/vc/lib -lbcm_host"
fi
So explicitly disable it until the configure script is fixed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-14919 - In zlib v1.2.9, a change was made that causes an
error to be raised when a raw deflate stream is initialized with windowBits
set to 8. On some versions this crashes Node and you cannot recover from
it, while on some versions it throws an exception. Node.js will now
gracefully set windowBits to 9 replicating the legacy behavior to avoid a
DOS vector.
For more details, see the announcement:
https://nodejs.org/en/blog/vulnerability/oct-2017-dos/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <<a href="mailto:peter@korsgaard.com">peter@korsgaard.com</a>><br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
(a) When installing themes with unterminated colour formatting
sequences, Irssi may access data beyond the end of the
string. (CWE-126) Found by Hanno Böck.
CVE-2017-15228 was assigned to this issue.
(b) While waiting for the channel synchronisation, Irssi may
incorrectly fail to remove destroyed channels from the query list,
resulting in use after free conditions when updating the state
later on. Found by Joseph Bisch. (CWE-416 caused by CWE-672)
CVE-2017-15227 was assigned to this issue.
(c) Certain incorrectly formatted DCC CTCP messages could cause NULL
pointer dereference. Found by Joseph Bisch. This is a separate,
but similar issue to CVE-2017-9468. (CWE-690)
CVE-2017-15721 was assigned to this issue.
(d) Overlong nicks or targets may result in a NULL pointer dereference
while splitting the message. Found by Joseph Bisch. (CWE-690)
CVE-2017-15723 was assigned to this issue.
(e) In certain cases Irssi may fail to verify that a Safe channel ID
is long enough, causing reads beyond the end of the string. Found
by Joseph Bisch. (CWE-126)
CVE-2017-15722 was assigned to this issue.
For more details, see the advisory:
https://irssi.org/security/irssi_sa_2017_10.txt
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing just the endianness flag to LD is not enough. We need to pass
the right emulation flag which will set everything for us, not only the
endianness.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tool hciattach_bcm43xx defines the default firmware path in `/etc/firmware`,
but the Broadcom firmware blobs are usually stored in `/lib/firmware`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-13685: The dump_callback function in SQLite 3.20.0 allows
remote attackers to cause a denial of service (EXC_BAD_ACCESS and
application crash) via a crafted file.
CVE-2017-15286: SQLite 3.20.1 has a NULL pointer dereference in
tableColumnList in shell.c
because it fails to consider certain cases where
`sqlite3_step(pStmt)==SQLITE_ROW` is false and a data structure is never
initialized.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/57d/57d9f0ea27e5c8ba73002bd1d0b33027f27a3779/http://autobuild.buildroot.net/results/7c3/7c3133e822c997879fe00923ba0ad7903656c2e1/
bootstrap by default runs ./tools/build/src/engine/build.sh --guess-toolset
to detect what toolchain (compiler variant). On x86 this returns gcc, but
on the ppc64le gcc112 autobuilder this returns xlcpp causing bootstrap.sh to
get confused and bail out:
./bootstrap.sh ..
Building Boost.Build engine with toolset ... tools/build/src/engine/###
\### No toolset specified. Please use --toolset option.
\###
\### Known toolsets are: acc, borland, cc, como, clang, darwin, gcc, gcc-nocygwin, intel-darwin, intel-linux, intel-win32, kcc, kylix, metrowerks, mipspro, msvc, qcc, pathscale, pgi, sun, sunpro, tru64cxx, vacpp, xlcpp, vc7, vc8, vc9, vc10, vc11, vc12, vc14, vc141, vmsdecc
\###/b2
Fix it by explicitly specifying the gcc toolset mode to bootstrap, similar
to how it was already done for the bjam invocations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some documentation about running the pc defconfigs in qemu.
In particular, document the use of the -bios parameter to use the OVMF
firmware to test the UEFI image.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).
However, older gcc versions do not offer this feature.
So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
https://reproducible-builds.org/specs/source-date-epoch/https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html
Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.
gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Python 3.x on MIPS with musl fails because the libffi code
uses a "#ifdef linux" test to decide if we're building on Linux or
not. When building with -std=c99, "linux" is not defined, so instead
of including <asm/sgidefs.h>, libffi's code tries to include
<sgidefs.h>, which doesn't exist on musl.
The right fix is to use __linux__, which is POSIX compliant, and
therefore defined even when -std=c99 is used.
Note that glibc and uClibc were not affected because they do provide a
<sgidefs.h> header in addition to the <asm/sgidefs.h> one.
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: reformat patch with Git, add a better commit log and description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, HOSTCC and HOSTCXX are set to their _NOCACHE variants in the
'dependencies' target. This is needed because at that time, ccache is
not built yet - host-ccache is one of the dependencies. However, because
this override is only specified for the 'dependencies' target (and
thereby gets inherited by its dependencies), the override is only
applied when the package is reached through the 'dependencies' target.
This is not the case when one of DEPENDENCIES_HOST_PREREQ is built
directly from the command line, e.g. when doing 'make host-ccache'. So
in that case, ccache will be built with ccache... which fails of
course.
To fix this, directly apply the override to the DEPENCIES_HOST_PREREQ
targets.
Note that this only fixes the issue for 'make host-ccache', NOT for
e.g. 'make host-ccache-configure'.
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
[Arnout: improve commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2017-9410: fill_buffer_resample function in libmp3lame/util.c heap-based
buffer over-read and ap
CVE-2017-9411: fill_buffer_resample function in libmp3lame/util.c invalid
memory read and application crash
CVE-2017-9412: unpack_read_samples function in frontend/get_audio.c invalid
memory read and application crash
Drop patches now upstream or no longer needed:
0001-configure.patch: Upstream as mentioned in patch description
0002-gtk1-ac-directives.patch: Upstream as mentioned in patch
description/release notes:
Resurrect Owen Taylor's code dated from 97-11-3 to properly deal with GTK1.
This was transplanted back from aclocal.m4 with a patch provided by Andres
Mejia. This change makes it easy to regenerate autotools' files with a simple
invocation of autoconf -vfi.
0003-msse.patch: Not needed as -march <x86-variant-with-msse-support>
nowadays implies -msse.
With these removed, autoreconf is no longer needed.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
that allows optional dependencies
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- use "luainterpreter" instead of "lua" in the dependencies
- replace with a Git formatted patch that doesn't comment code but
removes it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/ffc/ffc9c10c55c2838ab7002c5ec35244e9bfe46189/
Commit dfa1817d31 (openldap: supports only the real OpenSSL, not LibreSSL)
tried to ensure openldap would only use openssl, but changed the wrong
variable. OPENLDAP_TLS is passed to configure, so it shouldn't be changed:
./configure --target=aarch64-buildroot-linux-gnu .. --with-tls=libopenssl ..
Configuring OpenLDAP 2.4.45-Release ...
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-buildroot-linux-gnu
checking target system type... aarch64-buildroot-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for aarch64-buildroot-linux-gnu-strip... /usr/lfs/v0/rc-buildroot-test/scripts/instance-0/output/host/bin/aarch64-linux-gnu-strip
checking configure arguments... configure: error: bad value libopenssl for --with-tls
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the upstream announcement:
http://www.openwall.com/lists/oss-security/2017/10/19/5
Felix Wilhelm has discovered a flaw in the dns response parsing for
musl libc 1.1.16 that leads to overflow of a stack-based buffer.
Earlier versions are also affected.
When an application makes a request via getaddrinfo for both IPv4 and
IPv6 results (AF_UNSPEC), an attacker who controls or can spoof the
nameservers configured in resolv.conf can reply to both the A and AAAA
queries with A results. Since A records are smaller than AAAA records,
it's possible to fit more addresses than the precomputed bound, and a
buffer overflow occurs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous version was by mistake mixed up with the patch 'gst-plugins-bad:
openjpeg: Remove compatibility with openjpeg 2.0'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes a bug with the BR2_TOOLCHAIN_HAS_THREADS variable
handling which causes CGO_ENABLED to be always 0.
Furthermore, it fixes the cross compilation options for the go
compiler: setting CGO_ENABLED should be done only for the target
compiler not the host one.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Christian Stewart <christian@paral.in>
If selected use:
- system/buildroot harfbuzz in case __sync for 4 bytes is supported
- qt harfbuzz otherwise (using QAtomic instead)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gpu_mem option is not using the proper option argument which causes sed to
fail.
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.
Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is just a bug-fix release.
Removing 0003-BUG-Ensure-_npy_scaled_cexp-f-l-is-defined-when-need.patch
as it is a part of the release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At this point, libressl can be added to the openssl virtual package.
- Remove the entry package/libressl/Config.in from package/Config.in
- Remove the file: package/libressl/Config.in
- Add libressl entry to package/openssl/Config.in
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wpa_supplicant will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevent will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openldap will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
opusfile will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mosquitto will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
softether tries to use SSLv3 functionality as a fallback. LibreSSL
doesn't support SSLv3 anymore. Two main issues prevent a patch:
- Trying to wrap the sslv3 functionality from the source with a guard
clause results in linking errors after compiling is done.
- There are multiple security vulnerabilities with using sslv3.
- There are multiple security issues in github pertaining to using
sslv3.
- This project seems to not be updated very often, and the security
issues are being ignored it seems.
For people who still want to use softether, they will have to use
libopenssl.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
heirloom-mailx has two small issues when compiling against LibreSSL:
- RAND_egd is used (LibreSSL does not support RAND_egd)
Solution: "Guard" the code calling RAND_egd
- SSLv3_client_method function is used (LibreSSL does not support SSLv3)
Solution: "Guard" the code with #ifndef OPENSSL_NO_SSL3
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages that use openssl are not compatible with libressl, only
with the real openssl (known as libopenssl in Buildroot). So before we
add libressl as a provider for the openssl virtual package, we
introduce a BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL hidden option that
packages incompatible with LibreSSL will be able to select.
This will allow packages that need OpenSSL to continue using "select",
without having to change to using "depends on" dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To ease the transition to having both OpenSSL and LibreSSL, there has to be
a new virtual package introduced to handle both.
Instead of making a libssl, and adding OpenSSL and libressl to that package,
it will be far easier to move openssl to libopenssl and to make OpenSSL
a virtual package. This offers a few advantages:
- BR2_PACKAGE_OPENSSL is still a visible symbol with no dependencies.
- It does not require a huge patch to convert every instance of
OpenSSL -> libssl)
- Users will be able to update without ever having to select anything new.
- LibreSSL can be added at a later date to the virtual package.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_OPENSSL to the value
"host-libopenssl" as we always want to use the original OpenSSL for
the host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux 4.0 kernel doesn't build with gcc 6.x, which is used since
the toolchain update in commit
193dfffa83 ("support/testing: use more
recent toolchains"). So let's update to Linux 4.11 instead (like the
existing Qemu x86 defconfig does), and update the kernel configuration
file accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.
This produces the warning:
.config:2216:warning: override: KERNEL_GZIP changes choice state
is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.
Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..
Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl has a bug in that <sched.h> defines CPU_ZERO(), which uses
memset(), but it doesn't have the prototype for it. This has been
fixed by upstream musl but until we rebuild our toolchains, let's have
a patch for Boost that works around this problem. We will of course
remove this patch once musl is updated to 1.1.17 and our toolchains
have been rebuilt.
Fixes:
http://autobuild.buildroot.net/results/6884cff634367cb640940051a60e5e13f30f70a2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 95c15aaf15. It was
mistakenly pushed, and causes problems because it installs the shared
library to staging, but not to target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curl support is strongly recommended for multiplayer game.
The build system warn when curl is disabled:
cURL is required to load the server list
cURL is required to announce to the server list
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default pppd built by buildroot writes the list of nameservers to
/etc/resolv.conf instead of /etc/ppp/resolv.conf
This is not the default behavior of pppd and breaks name resolution
if several network interfaces are used. The change makes this optional
and enabled by default, to be backward compatible and to add a possibility
to turn this behavior off, if required.
Signed-off-by: Maksim Salau <msalau@iotecha.com>
[Arnout: extend the help text to explain that it won't work on readonly
rootfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove patches that has been merged/updated upstream
0001-fix-building-shared-libs.patch:
CmakeLists packages are rewritten.
0002-add-support-for-tz-package:
dd93fd2b3d
0003-add-missing-define.patch:
656b3be02d
0004-ffmpeg30.patch:
b7b66968f9
Also add sha256sum for license file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The coroutine2 functionality is now provided only through headers, the
compiled library has disappeared. Due to that passing "coroutine2" as
argument to --without-libraries. Hence, the
BR2_PACKAGE_BOOST_COROUTINE2 option is removed by this commit.
We don't need Config.in.legacy handling, because coroutine2 support is
now unconditionally available in boost.
While at it, add LICENSE_1_0.txt sha256sum to boost.hash.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop Config.in.legacy handling, reword commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes (many of them related to rendering, plus one
important fix for touch input) and many security fixes.
Release notes:
https://webkitgtk.org/2017/10/18/webkitgtk2.18.1-released.html
Fixes CVE-2017-7081, CVE-2017-7087, CVE-2017-7089, CVE-2017-7090,
CVE-2017-7091, CVE-2017-7092, CVE-2017-7093, CVE-2017-7094,
CVE-2017-7095, CVE-2017-7096, CVE-2017-7098, CVE-2017-7099,
CVE-2017-7100, CVE-2017-7102, CVE-2017-7104, CVE-2017-7107,
CVE-2017-7109, CVE-2017-7111, CVE-2017-7117, CVE-2017-7120,
CVE-2017-7142:
https://webkitgtk.org/security/WSA-2017-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
configure: WARNING: unable to find required header jpeglib.h
configure: WARNING: unable to find required library jpeg
configure: error: some required prerequisites were not found
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for is set to BR2_OPTIMIZE_S, the help comment designated
BR2_OPTIMIZE_0 as default.
Changed the help comment to show that BR2_OPTIMIZE_S is the default.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-Remove-incorrect-dependency-from-install-data-hook.patch is
patching Makefile.am, so we need to autoreconf. If we don't do this,
we get build failures such as:
configure.ac:3: error: version mismatch. This is Automake 1.15.1,
configure.ac:3: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:3: comes from Automake 1.15. You should recreate
configure.ac:3: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
You should only need it if you modified 'Makefile.am' or
'configure.ac' or m4 files included by 'configure.ac'.
Fixes:
http://autobuild.buildroot.net/results/440c9edd34d56d9207b9f1ee326a14a1c757b27d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v2 --> v3:
- use 'Hashes for license files:' instead of repeated
'Hash for license file' (suggested by Thomas Petazzoni)
Changes v2:
- add reviewed-by and minor commit title change (removed package prefix)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0002-disable-tests.patch modifies Makefile.am, so we have to
autoreconf. It hasn't been seen until now, but becomes very clear
since the bump of automake to 1.15.1, as we're seeing build failures
such as:
configure.ac:66: error: version mismatch. This is Automake 1.15.1,
configure.ac:66: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:66: comes from Automake 1.15. You should recreate
configure.ac:66: aclocal.m4 with aclocal and run automake again.
Fixes:
http://autobuild.buildroot.net/results/3402357d8e90f1866dfeaee7bb61119d80dc8bcb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-7805 - Martin Thomson discovered that nss, the Mozilla
Network Security Service library, is prone to a use-after-free vulnerability
in the TLS 1.2 implementation when handshake hashes are generated. A remote
attacker can take advantage of this flaw to cause an application using the
nss library to crash, resulting in a denial of service, or potentially to
execute arbitrary code.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.
While at it, remove the custom scripts for generating the SD card image
and use the standard scripts instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ifupdown-scripts has some .empty files to maintain empty directories
in git. Previously this package used to be part of the skeleton which
used SYSTEM_RSYNC to copy the directories to the target. When it was
split into a separate package, cp -a was used to do the copy instead,
which copies the .empty files.
Change to SYSTEM_RSYNC which excludes .empty files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The WITH_PTHREADS_PF option was errantly categorized as a Windows only option.
WITH_PTHREADS_PF actually enables a parallelization framework that utilizes
pthreads to optimize some inner for loops of different OpenCV operations. This
optimization is available on any platform that has pthreads.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "virt" machine supports disk emulation, so use a ext4 rootfs instead of
initramfs for consistency with the other qemu defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license file got reformatted as reStructuredText, but the license itself
didn't change.
Drop unneeded md5sum and add license hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the target and host flex packages do not behave the same in
terms of patching: the target variant has a patch hook that disables
building the programs (because they are not needed, and do not build
on no-MMU platforms). However, this hook is obviously not executed for
host-flex, because we really want the host flex binary to be built.
In preparation for the introduction of out-of-tree package build, it
is important that we don't do different things in the patch hooks for
the target and host variant of a given package, because the source
tree will be shared between the target and host builds.
To solve this, we introduce a --disable-program configure option,
through a patch to the flex configure.ac and Makefile.am. This patch
makes the current 0001-flex-disable-documentation.patch no longer
needed.
Furthermore, building the documentation is a PITA: flex.1 depends on
configure.ac and a few other files generated during the build. Touching
flex.1 does not work, because automake will forcibly remove the files
when its prerequisites are too old, so pre-requisites of flex.1 will
always be more recent than flex.1. So, we add a patch that adds a
--disable-doc configure option.
Fixes:
http://autobuild.buildroot.org/results/f70/f70b39632535bb9692d0a032166b2f4104532967/http://autobuild.buildroot.org/results/525/52567afdfe7992b3518de0e01227ba14aa300f21/
[...]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase on-top of master,
- add patch to not build the documentation, because simply touching
flex.1 is no longer enough.
- keep install in target/, for shared builds
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Adrian Perez de Castro <aperez@igalia.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream wiringpi apparently has some issues with their release
process: their 2.42 and 2.44 tags point to the exact same commit. And
at the 2.44 tag, the VERSION file was not updated to indicate that
it's version 2.44.
A follow-up commit added support for the RPi Zero-W, and fixed the
VERSION file to contain 2.44. So let's use this follow-up commit as
the new version for wiringpi.
This will hopefully clarify things, and avoid confusion such as the
one reported in bug #10391 [1].
[1] https://bugs.busybox.net/show_bug.cgi?id=10391
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Neon is compulsory on AArch64, and BR2_ARM_CPU_HAS_NEON is false on
AArch64. Therefore, this change is needed to enable building VC4
gallium driver for Rpi3 using AArch64.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Linuxptp to the latest version from 1. September 2017
This update brings bugfixes and minor enhancements.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the download directory, when specified with the -d option, is
only used to store the files downloaded by the testing infra, not those
downloaded by Buildroot.
So, we end up with this situation:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(TOP_DIR)/dl
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(BR2_DL_DIR)
This is not very consistent.
We change the behaviour so that the value of -d always takes precedence,
and is used by Buildroot as well, giving this new behaviour:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finally there's working ARC port of glibc thanks to Vineet and Cuper!
This port is based on pretty recent glibc's master branch and ARC
changes are being reviewed now in glibc's mailing list.
Thus we again have to use sources from our GitHub but as soon as there's
a glibc release with our patches applied we'll switch to upstream releases
and will drop our glibc GitHub repo alltogether.
Note now we cut tags in glibc repo simultaneously with tags
in Binutils and GCC repos and so to make sure everything works in the best
way we plan to update glibc tag together with Binutils and GCC.
Also note as of today ARCompact (AKA ARCv1 ISA) is not supported in glibc
but we plan to fix it soonish so for now we make glibc intentionally
dependent on archs38.
Also note we are not creating directory "2.26" because all patches for glibc
ver 2.26 applies to arc glibc port.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Waldemar Brodkorb <wbx@openadk.org>
CC: Romain Naour <romain.naour@gmail.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mainline kernel is able to decode video via the coda driver.
Add support for it and also add some explanation on how VPU decoding
can be tested with Gstreamer.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-13720 - Check for end of string in PatternMatch
CVE-2017-13722 - pcfGetProperties: Check string boundaries
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d1011f89a1 (audit: update legal info) set the libraries license
to "unclear" because of GPL license text in a few libraries source
files. Upstream audit package commit 239765162fa494 (Correct the
licensing description in lib/ and auparse/ to be LGPL as was always
intended) clarified the license in these files.
Add license files hashes.
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
start-stop-daemon fails on -R when not compiled with
CONFIG_FEATURE_START_STOP_DAEMON_FANCY. Thus, do not rely on -R
during stop to avoid a race condition during restart.
Use a sleep 1 during restart instead, as suggested by Peter Korsgaard
in <87bmluk4bm.fsf@dell.be.48ers.dk>.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package doesn't actually rely on the msgpack runtime libraries, it's a
pure python implementation.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Modern versions of msgpack are hosted on Github. Msgpack switched
their build systems from autotools to cmake a while back. The licence
was also updated from Apache to Boost.
Signed-off-by: bradford barr <bradford@density.io>
[Thomas: drop custom install commands, add LICENSE_1_0.txt to license
files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is based on the bcg729 library from Belledonne Communica-
tions which is wrapped into a freeswitch module to provide a native
G729.A codec.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps ARC toolchain to arc-2017.09-rc1.
The arc-2017.09 series is built on top of upstream GCC 7.1.1 and
Binutils 2.29 so please expect all kinds of breakages related to GCC
7.x as we saw earlier with the move from 4.8 to 6.x :)
Note patches for both GCC and Binutils were updated with
copies from corresponding mainline versions, i.e.
"package/gcc/7.2.0" and "package/binutils/2.29".
Please note that it is a release candidate and it might contain some
breakages, please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: drop binutils patch related to the Blackfin architecture.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce imx6-sabreauto_defconfig that uses mainline U-Boot and
mainline kernel.
As mainline U-Boot supports SPL, it is possible to boot the same
sdcard.img in the three mx6sabreauto variants: imx6q, imx6dl and imx6qp.
Also update the readme.txt file to explain how to build an image for
mx6sabreauto boards using mainline U-Boot and kernel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: regenerate gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the explanation of the need for using the performance governor.
This problem is specific to mx6sabresd board and the Egalax touchscreen
running a mainline kernel, so make this clear.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
parted uses libiconv but doesn't link with it. All the checks are there
in configure, but the Makefile.am doesn't add it to the link. Add a
patch to fix this.
Also add an optional dependency on libiconv, so it is reproducible.
While we're at it, regenerate the existing patches on top of v3.2, and
make patch 0003 a properly git formatted one.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: srg.venema@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I got this error when attempting to build:
aclocal: error: couldn't open directory 'm4': No such file or directory
So we now have the post patch hook to ensure the m4 directory is
present.
In addition, the package now sets a variable with the Git SHA1 so that
the binary contains the expected output for --version.
Specific configurations of uClibc cause a build failure in pdbg. This commit
adds a patch to remove the definition of the offending macro (it is unused in
the source).
In file included from usr/include/stdio.h:71:0,
from libpdbg/fake.c:17:
include/bits/uClibc_stdio.h:149:16: error: expected identifier or ‘(’ before ‘;’ token
void *__unused; /* Placeholder for codeset binding. */
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python3 support was added to libiio in version 0.10.
This commit adds the option to compile libiio bindings if python3 was
selected instead of python.
Signed-off-by: Béla Becker <bela.becker@pcbdesign.hu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 95cb1465f0 added the
atmel_sama5d27_som1_ek_mmc_dev_defconfig but forgot to update
.gitlab-ci.yml. Update it now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The parts of the readme.txt that specify the board-specific aspects
(DTB files, KMS config json file) were a bit confusing. For the DTB
files this is solved by putting the board it applies to after the DTB
file name. For the json files, this is solved by adding an extra line,
so the CinematicExperience-demo is clearly separated from the setting
of QT_QPA_EGLFS_KMS_CONFIG.
Also remove the 'for all boards' line in the beginning, it doesn't add
any value.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 12 Kit.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 10.1 Kit.
Since the defconfig is no longer only for the starter kit, remove that
from BR2_TARGET_GENERIC_ISSUE.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
musl provides its own SYS_getrandom definition, but not GRND_NONBLOCK.
This breaks the build with kernel headers older than v3.17. Add a patch
adding a local definition of GRND_NONBLOCK to fix the build.
The following defconfig reproduces the build failure:
BR2_x86_pentium_mmx=y
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_KERNEL_HEADERS_3_12=y
BR2_PACKAGE_LIBRESSL=y
The getentropy_linux.c file is in upstream tarball, but not in its git
repository. It originates from OpenBSD. For this reason the patch is
against the tarball, but not git formatted.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: change filename to correspond to how git creates it]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This upstream patch fixes the build error produced by building for
powerpc 32bit after the glibc bump to 2.26 with the following internal
toolchain config.
gcc5.4.0
glibc2.26
bin2.28.1
linux4.1.43
Failure log:
CC net/proto-ipv4.o
net/proto-ipv4.c: In function ‘ip_setsockopt’:
net/proto-ipv4.c:231:49: error: ‘UIO_MAXIOV’ undeclared (first use in this function); did you mean ‘_IO_MAGIC’?
so->optlen = rnd() % sizeof(unsigned long)*(2*UIO_MAXIOV+512);
^~~~~~~~~~
_IO_MAGIC
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: add Matthew's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the remaining code style warnings from flake8:
- properly indent continuation lines;
- use proper code to test a parameter is not None.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the trivial warnings from flake8:
- remove modules imported but unused;
- use 2 lines before class or module level method;
- remove blank line at end of file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change all defconfig fragments to take advantage of
"cf3cd4388a support/tests: allow properly indented config fragment".
Make each defconfig fragment:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the strip out of leading spaces in defconfig fragments from the
BRTest class to the Builder class. It actually postpones the strip out,
consequentially allowing test cases to post-process the defconfig in
their own __init__ before calling the __init__ method from BRTest.
Moving this code to the Builder class also allows any new test class
that inherits from BRTest to reuse the same code even if the new class
overrides the setUp method.
At same time, prepend a newline to the jlevel handling otherwise it
would stop working for defconfig fragments that don't end in a newline.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot nowadays also uses kconfig, so we can handle config fragments like we
do for barebox/busybox/linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
And add hashes for the license files while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix for CVE-2017-9798 is included in this release, so this patch is
removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Update commit log: not a security bump]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump at91sam9x5ek, atmel_sama5d2_xplained, atmel_sama5d3_xplained and
atmel_sama5d4_xplained all variants to linux4sam_5.7. The 3 foundation
components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency is actually only for the kernel module (and thus on the
runtime kernel version rather than kernel headers), but as we don't know the
runtime version in kconfig and the user space part doesn't make much sense
without the kernel module this will have to do.
[Peter: extend commit message, add comment to Config.in as suggested by
Arnout, fix off-by-one in comment text]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is only for the device-mapper library, so a user selectable
Config.in.host option isn't needed.
[Peter: add host-pkgconf dependency as pointed out by Arnout]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues and adds a number of other bigfixes:
2.8.1: Changelog:
https://lists.gnu.org/archive/html/qemu-devel/2017-03/msg06332.html
CVE-2017-2615 - display: cirrus: oob access while doing bitblt copy backward
mode
CVE-2017-2620 - display: cirrus: out-of-bounds access issue while in
cirrus_bitblt_cputovideo
CVE-2017-2630 - nbd: oob stack write in client routine drop_sync
2.8.1.1 Changelog:
https://lists.gnu.org/archive/html/qemu-devel/2017-04/msg03460.html
CVE-2017-7471 - 9p: virtfs allows guest to change filesystem attributes on
host
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.net/results/8e6/8e639ab8912e7d884fd8e6dbb1ca8b49451dd766/
/home/test/autobuild/run/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x54): undefined reference to `inflate'
/home/test/autobuild/run/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_compress_block':
c_zlib.c:(.text+0xd4): undefined reference to `deflate'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
./configure: --disable-uuid is obsolete, UUID support is always built
Change-Id: I9e278418d19e15bbbd3ea233658cd62f75e3385c
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Qt with QtWebKit on configuration step there is
a check which disables QtWebKit build with GCC 6+.
Back in the day nobody thought about building Qt with GCC
version greater than 5.x. And now with modern GCCs like
6.x and 7.x this assumption gets in the way.
Given in Buildroot today we don't have GCC older than 4.9
it should be safe to remove now meaningless check completely
by adding patch to qt.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, bridge-utils wants to grap the headers from the linux-headers
package, so we point it directly there, as has been the case since we
first added bridge-utils in 2003 (c8eea31d3f), and then further refined
in 2005 (178a317d26) which is the first moment we pointed to the linux-
headers directory.
However, ther are two things wrong with that.
First, the headers are not directly in $(LINUX_HEADERS_DIR). Instead,
they are in a sub-directory thereof. So, we could not have found them
the way we are doing now.
Second, this definitely does not work when using an external toolchain,
because there is not linux-headers package enabled then.
Yet, against all odds, bridge-utils has valiantly deflected all rocks
thrown its way, day-in day-out building without any issue in every
autobuilders it's been confronted with. Good boy, good boy. :-)
And indeed, it turns out that the required headers are easily found from
within the sysroot of the toolchain. Wonders! :-)
But there's still a gotcha: the default search path is still a hard
coded path pointing to the installed kernel source tree on the host.
So, we still have to pass this option, but we can simply point to the
sysroot.
[Peter: point to sysroot instead of non-existing directory]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Glibc bump to 2.26 exposed this missing header when building with the
following combination using an i386 internal toolchain:
gcc5.4.0
bin2.28.1
linux4.1.43
Logfile snippet:
2017-10-02T00:08:11 ^
2017-10-02T00:08:12 rpc.c: In function ‘nsm_recv_getport’:
2017-10-02T00:08:12 rpc.c:469:13: error: ‘UINT16_MAX’ undeclared (first use in this function)
Upstream: https://bugzilla.linux-nfs.org/show_bug.cgi?id=312
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The COPYING file is part of the xf86-input-tslib project's source tree.
Let's include the hash for it's current version.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those cores are not supported in upstream gcc, not even in master.
The only toolchain that supported those core was the 2014R1 ADI
rebuilt toolchain, but we removed it in 311bc13 (toolchain: kill
ADI Blackfin toolchain) because there was too many issues with it.
ADI has not released any newer toolchain since then.
There is little hope for those cores now, so remove them.
Support for those cores has been useless and unusable for a while
without nobody noticing, therefore we intentionally skip adding
Config.in.legacy. This would require keeping code in
arch/Config.in.bfin since the options being removed are inside a
choice...endchoice block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: explain why we don't add the options to Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc does not have support for C-Sky, and we do not have a
vendor tree for it either (yet?).
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures or specific cores do not have support in upstream
gcc. Currently, they are individually listed as exclusions in the
toolchain choice.
This poses a maintainance burden, as the knowledge about what gcc
version supports what architecture is split across many places: the
toolchain choice, the gcc version choice, the external toolchains.
As a first step, add a blind option that architectures or individual
cores may select to indicate they lack support in our internal backend.
Actual use of the option will come in followup patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since tslib's COPYING file in part of the source tree, we can easily
include it's hash for the given version here.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop direct sed'ing of config.h for HAVE_CONNTRACK, HAVE_LUASCRIPT, and
HAVE_DBUS. Use MAKE_OPTS COPTS parameters instead, like we do already
for all other options.
Rename DNSMASQ_ENABLE_LUA to DNSMASQ_TWEAK_LIBLUA since it now does only
that.
Merge two conntrack and three dbus conditional sections.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supported Lua version is now 5.2.
Add licenses hash.
Fixes a number of security issues:
CVE-2017-13704 - Crash when DNS query exceeded 512 bytes (a regression
in 2.77, so technically not fixed by this bump)
CVE-2017-14491 - Heap overflow in DNS code
CVE-2017-14492 - Heap overflow in IPv6 router advertisement code
CVE-2017-14493 - Stack overflow in DHCPv6 code
CVE-2017-14494 - Information leak in DHCPv6
CVE-2017-14496 - Invalid boundary checks allows a malicious DNS queries
to trigger DoS
CVE-2017-14495 - Out-of-memory Dos vulnerability
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the extraction commands entirely remove the urg directory,
which means the downloaded stamp will get removed, and thus a subsequent
build would try to re-download it.
It turns out that the directory extracted by urg is already correctly
named, so we just need to extract out of the build directory. This
highly simplifies the command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit eec04a7b7d.
The original commit bumped the package to a version which is at runtime
incompatible with Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, it was working by luck. Buildroot has fixed its definition
of HOST_DIR and pkg-autotools.mk uses the classical /usr prefix. So,
fix this sed expression to correctly replace $(HOST_DIR) by /usr in ERL
path.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed,so update the entry accordingly.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed, so update their entries accordingly.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We explicitly remove pkg-config files from target in the target-finalize
step, and our pkg-config looks for .pc files from staging, not target.
So, explicitly installing the .pc in target is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the host uses glibc 2.26 or newer, Flex will try to use the
newly-introduced reallocarray() function, but as it would not define
_GNU_SOURCE a segmentation fault would occur later on due to the
compiler assumming that the function is implicitly defined.
This issue manifests itself due to a crash of "stage1flex" during the
Flex bootstrap:
./stage1flex -o stage1scan.c ./scan.l
make[2]: *** [Makefile:1725: stage1scan.c] Segmentation fault (core dumped)
This imports the patch from the upstream Git repository, and adds flags
in the .mk file to rebuild the Autotools scripts and support files. Due
to the latter, the patch to disable the documentation is changed so it
modifies the .am file instead.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- Add Adrian's Sob and upstream ref to new patch;
- Keep patch 1 as patch 1;
- Keep Vicente as author of path 1;
- Add reason for autoreconf in a comment.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This doesn't compile with glibc 2.26 where reallocarray() as been introduced.
It's a nasty issue, when reallocarray() is available for the target, flex will
build a small tool called stage1flex for the host (using _FOR_BUILD) but with
the config.h generated for the target.
When the host doesn't have a glibc >= 2.26, reallocarray() is never defined
while building stage1flex:
misc.c:147:8: warning : implicit declaration of function « reallocarray »
[-Wimplicit-function-declaration]
mem = reallocarray(NULL, (size_t) size, element_size);
^~~~~~~~~~~~
misc.c:147:6: warning : assignment makes pointer from integer without a cast
[-Wint-conversion]
mem = reallocarray(NULL, (size_t) size, element_size);
^
Disable reallocarray for now, reallocarray() support may be
enabled in a followup patch.
Fixes:
stage1flex-misc.o: In function `allocate_array':
misc.c:(.text+0x38f): undefined reference to `reallocarray'
stage1flex-misc.o: In function `reallocate_array':
misc.c:(.text+0xc8a): undefined reference to `reallocarray'
collect2: error: ld returned 1 exit status
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since glibc >= 2.26, don't try to use getopt_long replacement bundled
with diffutils. It will conflict with the one from glibc.
The getopt copy bundled in glibc has been updated with the one from gnulib.
After a lot of warnings...
Fixes:
xstrtol-error.c: In function 'xstrtol_error':
xstrtol-error.c:84:26: error: invalid use of undefined type 'struct rpl_option'
option = long_options[opt_idx].name;
^
xstrtol-error.c:84:26: error: dereferencing pointer to incomplete type 'const struct rpl_option'
[...]
xstrtol-error.c:92:1: error: conflicting types for 'xstrtol_fatal'
xstrtol_fatal (enum strtol_error err,
^~~~~~~~~~~~~
In file included from xstrtol-error.c:20:0:
xstrtol.h:69:16: note: previous declaration of 'xstrtol_fatal' was here
_Noreturn void xstrtol_fatal (enum strtol_error,
^~~~~~~~~~~~~
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
float128 is now required on powerpc64le with glibc >= 2.26 toolchains.
Fixes:
running configure fragment for sysdeps/gnu
running configure fragment for sysdeps/powerpc/powerpc64le
checking if [...]powerpc64le-buildroot-linux-gnu-gcc supports binary128 floating point type... no
checking if the target machine is at least POWER8... yes
configure: error: *** binary128 floating point type (GCC >= 6.2) is required on powerpc64le.
In order to prepare the glibc bump to this version, we enable
binary128 floating point in gcc. This require at least gcc >= 6.2.
Disable gcc 4.x and 5.x for internal toolchain.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc: In function ‘int __sanitizer::TracerThread(void*)’:
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc:241:22: error: aggregate ‘sigaltstack handler_stack’ has incomplete type and cannot be defined
struct sigaltstack handler_stack;
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc: In function ‘int __sanitizer::TracerThread(void*)’:
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc:276:22: error: aggregate ‘sigaltstack handler_stack’ has incomplete type and cannot be defined
struct sigaltstack handler_stack;
^~~~~~~~~~~~~
The fix is already included in gcc 7.2 release [1]. We have to backport it to
all older gcc release since it's not included in any stable release yet.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=72edc2c02f8b4768ad660f46a1c7e2400c0a8e06
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Default prefix is set to `BR2_` but may be overidden by setting
BR2_PREFIX.
Example usage:
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --enable GNUPG
Check state of config option `BR2_PACKAGE_GNUPG`:
./utils/config --package --state GNUPG
y
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --disable GNUPG
Set `BR2_TARGET_GENERIC_ISSUE` to "Welcome":
./utils/config --set-str TARGET_GENERIC_ISSUE "Welcome"
Copied from the Linux kernel (4.13-rc6) source code and adapted to
Buildroot.
Thanks to Andi Kleen who is the original author of this script.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Arnout: merge the two tr invications]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The amount of GPU memory can be set using the new option --gpu_mem_XXX
(where XXX is the total amount of memory available on the board).
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use the maintainer's repository, update the package description, based
on the official one, and drop an obsolete patch.
Change-Id: I2170aa4c1cc57de2a25ef04e89a216b254f2a859
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an entry to explain how to run the glmark benchmark.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump the kernel version to 4.13.3.
Kernel 4.13.3 uses the /dev/dri/card0 device as rendering node, so
adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.09 uses SPL, so bump to this version so that we can
have a single qt5 image that supports the different imx6 sabresd
boards: imx6q, imx6dl and imx6qp.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The QT5 rootfs requires more space, so adjust it a larger size.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that SPL is supported a single image can run on the different
variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp.
So drop the 'quad' prefix from defconfig, directory and readme file
to make it generic.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The host menuselect tool is linked to our host libxml2 library, but it
is missing an RPATH to the host directory.
This is because menuselect does not use automake, so does not inherit
the LDFLAGS from the configure run.
We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make
environment.
At the same time, we also install the tool in the host directory, even
if not used from there, so that the sanity checks we run are properly
passed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We sanity-check the host executables that they have a correct RPATH
pointing to the host libraries.
This is currently done by looking for all files in $(HOST_DIR) that
match the 'ELF executable' pattern (a bit more complex, but that's
idea).
However, when an executable is built with -fPIE of -fpie, it no longer
appears to be an 'ELF executable', but it rather looks like an 'ELF
sheard object' (like if it were an library.
So, we miss those files.
It turns out that the problem is a real one, because quite a few
mainline distros, expecially those based on Debian for example, have
already switched to generating PIE code by default, and thus we miss on
a whole class of systems..
We fix that by simply looking if we can find an ELF interpreter in each
file. If we there is one, this is an ELF executable; if not, it may be
anything else: we don't care (not even about ELF libraries).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix package/nginx/S50nginx:
* On stop, use start-stop-daemon -R 1 to wait for the nginx processes
to actually stop. This fixes a race condition with restart, where
nginx fails to restart because start is called too early
w.r.t. stop. (This only works with Debian's start-stop-daemon,
however BusyBox's start-stop-daemon does not fail when given -R; it
just ignores the argument silently).
* Implement reload with an actual reload instead of a restart.
* Add force-reload.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass an offset of 1MB for the start of the rootfs.
Otherwise we get rootfs corruption when the bootloader is manually
written to the SD card.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch from github hash to an official release.
Several upstream patches are required to build the code correctly
on all platforms supported by buildroot.
The test application now uses fork().
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
[Arnout: Squash the two patches, MMU dependency was introduced with the
version bump.
Wrap assignments in libkcapi.mk differently.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.07 has switched to SPL boot, which allows the same binary to
boot on imx6dl, imx6q and imx6qp sabresd boards.
Switch to the SPL mechanism.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sysklogd had only SYSV init scripts. Add systemd service files to start
klogd and syslogd.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The symlink to /etc/systemd/system/syslog.service was pointing 4 levels up
to /usr/lib instead of 3 levels up.
This wasn't an issue on the actual system (/../ equals to / ) but was causing a
deadlink in the TARGET directory.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Dependency to json-c was dropped, updated reverse dependencies as well
and added optional dependency to libatomic_ops
https://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/configure.ac#n250
when __sync_bool_compare_and_swap is not available.
Removed patch applied upstream:
0002-webrtc-C-11-is-only-required-for-WebRTC-support.patch
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LIBC is really only used to construct the target tuple. To check if we
are using a uClibc toolchain, we use BR2_TOOLCHAIN_USES_UCLIBC.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building bash statically, configure does not initialize the
SHOBJ_STATUS variable. The SHOBJ_STATUS make variable in
examples/loadables/Makefile.in must resolve to either 'supported' or
'unsupported'. Otherwise, the install-$(SHOBJ_STATUS) target does not
exist.
This leads to the following build failure:
make[2]: Entering directory '.../output/build/bash-4.4/examples/loadables'
make[2]: *** No rule to make target 'install-', needed by 'install'. Stop.
make[2]: Leaving directory '.../output/build/bash-4.4/examples/loadables'
Makefile:793: recipe for target 'install' failed
with the following defconfig:
BR2_arm=y
BR2_STATIC_LIBS=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_BASH=y
Note that this doesn't terminate the build so it's not detected as an
error by the autobuilders.
Set SHOBJ_STATUS in the configure environment as a workaround.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Package switched to cmake without providing most of the autoconf
options previously available. Therefore we move all suboptions to
Config.in.legacy.
All patches are removed, the files to be patched do not exist anymore.
OPENOBEX_EXTRACT_CMDS is not needed anymore, upstream provides the
source as .tar.gz now.
Version 1.6 added support for libusb-1.x and udev. The current version
also supports bluez5_utils, not only bluez_utils.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: add help text to legacy options]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Includes some fixes for the Raspberry Pi, amongst many others.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reiterate once more that <packagename>_PATCH variable can point
to an arbitrary URL, not just to a path relative to <packagename>_SITE.
While we're at it, also explain that the patch should be added to the
.hash file.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
[Arnout: add sentence about .hash file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
configure.ac use PKG_CHECK_MODULES macro to find some libraries dependencies.
So add host-pkgconf in LVM2_DEPENDENCIES.
Fixes:
checking pkg-config is at least version 0.9.0... ./configure: line 9875: [...]/host/bin/pkg-config: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix libglu build error
CXXLD libGLU.la
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lXext
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lX11
collect2: error: ld returned 1 exit status
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
The nvidia binary blob is linked to libX11.so & libEext.so
$ output/host/bin/i586-buildroot-linux-gnu-readelf -a output/target/usr/lib/libGL.so | grep NEEDED
0x00000001 (NEEDED) Shared library: [libnvidia-tls.so.381.09]
0x00000001 (NEEDED) Shared library: [libnvidia-glcore.so.381.09]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.6]
0x00000001 (NEEDED) Shared library: [libdl.so.2]
which is also reflected by Libs-section of package/nvidia-driver/gl.pc.
To allow other packages linking to libGL.so provided by this package we
need to reflect the fact that xlib_libX11 & xlib_libXext are not
runtime-only dependencies.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build error
>>> libglu 9.0.0 Autoreconfiguring
configure.ac:50: error: Could not locate the pkg-config autoconf macros.
These are usually located in /usr/share/aclocal/pkg.m4. If your macros
are in a different location, try setting the environment variable
ACLOCAL="aclocal -I/other/macro/dir" before running autoreconf.
configure.ac:50: the top level
autom4te: /home/buildroot/br4/output/host/bin/m4 failed with exit status: 1
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Version 2.18.x includes support for remotely controlling WebKitGTK+
based browsers using the standard WebDriver API. Typically this is used
by Web developers, and in most cases it will be desirable to disable it
from builds.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release notes:
https://webkitgtk.org/2017/09/11/webkitgtk2.18.0-released.html
No corresponding WebKit Security Advisory (WSA) has been published.
All patches have been applied upstream.
This also bumps the required target GCC version, due to the WebKit code
now using more modern C++ features which were introduced in version
5.x of the compiler.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- propagate dependency to midori;
- mention in commit message why patches were removed.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While currently there is no in-tree Buildroot package which depends on
host-python-six, it can be needed to build external packages.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently it is always required to add package version as an argument to
the github helper. Since the version is always defined as PKG_VERSION,
drop this argument and generate it automatically inside the helper
routine.
The github helper function is extended to support both 2 and 3 argument
variants (ie. either use the provided package version argument or
automatically substitute with PKG_VERSION if not available), which can
make the transition of the package files easier as well allows using the
3-argument variant outside of package definitions.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The author of lbase64 maintains 3 separate versions of the package for
the 3 Lua versions. Only the 5.1 version is uploaded to luarocks, so
that is the one we currently support in Buildroot.
However, the three versions are nearly identical. With a small patch,
this allows us to support all Lua versions from a single tarball.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is based on works [1] and [2].
With this patch, one can run the Qt5 WebEngine quicknanobrowser sample
with the following options.
BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc" and
BR2_TOOLCHAIN_BUILDROOT_CXX (Qt 5 needs a toolchain w/ wchar, NPTL, C++,
dynamic library; for now it builds only with glibc)
BR2_PACKAGE_LIBERATION (Qt needs at least one font)
BR2_PACKAGE_QT5BASE_EXAMPLES (to install quicknanobrowser sample)
BR2_PACKAGE_QT5BASE_GIF (do display gif)
BR2_PACKAGE_QT5BASE_JPEG (do display jpeg)
BR2_PACKAGE_QT5BASE_PNG (do display png)
BR2_PACKAGE_QT5QUICKCONTROLS (needed by webengine)
BR2_PACKAGE_QT5QUICKCONTROLS2 (needed by webengine)
BR2_PACKAGE_QT5WEBENGINE (because it is what we want)
Qt WebEngine requires an Open(E)GL-capable backend. As an example, the
package rpi-userland must be enabled to build for a rpi.
BR2_PACKAGE_RPI_USERLAND (to enable OpenGL ES backend)
To browse for HTTPS websites, please consider adding the following
options as well for SSL/TLS.
BR2_PACKAGE_CA_CERT (for certificates)
BR2_PACKAGE_NTPD (to sync date for certificates)
Since version 5.9, chromium requires udev at runtime (see note 4).
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV (input backend)
To run quicknanobrowser
# cd /usr/lib/qt/examples/webengine/quicknanobrowser/
# ./quicknanobrowser https://www.buildroot.org/
Note: The chromium.inc has been generated using the following command.
( echo 'CHROMIUM_LICENSE_FILES = \' &&
cd output/build/qt5webengine-5.9.1/ && \
find "src/3rdparty/chromium/" -type f -iname "*LICENSE*" -o -iname "*COPYING*" -o -iname "*GPL*" | \
sed -e '/\.asm$/d' \
-e '/\.h$/d' \
-e '/\.c$/d' \
-e '/\.cc$/d' \
-e '/\.cpp$/d' \
-e '/\.pyc\?$/d' \
-e '/\.pl$/d' \
-e '/\.sha1$/d' \
-e '/\.patch$/d' \
-e '/licensecheck/d' \
-e 's,^,\t,' \
-e 's,$, \\,' | \
sort && \
echo '' ) >package/qt5/qt5webengine/chromium.inc
Note 2: Since 5.9.1, the chromium's copy of opus fails with neon [3].
Qt WebEngine can uses buildroot ffmpeg copy which compiles fine (using
qmake flag WEBENGINE_CONFIG+=use_system_ffmpeg). It implies selecting
the following options.
BR2_PACKAGE_FFMPEG
BR2_PACKAGE_OPUS
BR2_PACKAGE_LIBVPX
BR2_PACKAGE_WEBP
BR2_PACKAGE_WEBP_DEMUX
In file included from ../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:31:0:
/home/gportay/src/buildroot/output-rpi3-qt5.9/host/lib/gcc/arm-buildroot-linux-gnueabihf/6.4.0/include/arm_neon.h:8997:1: error: inlining failed in call to always_inline ‘vld1q_s32’: target specific option mismatch
vld1q_s32 (const int32_t * __a)
^~~~~~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:40:15: note: called from here
int32x4_t coef0 = vld1q_s32(coef32);
^~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-#pragma-messages’
Note 3: Version 5.6.2 causes a build issue while building chromium. The
build against this version is disabled until the release 5.6.3 is out.
Note 4: Here is trace when udev does not run
# cd /usr/lib/qt/examples/webengine/quicknanobrowser
# ./quicknanobrowser
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
[0101/000248.161973:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[0101/000248.384693:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[202:223:0101/000248.484954:FATAL:udev_loader.cc(38)] Check failed: false.
#0 0x0000742b93de <unknown>
#1 0x0000742c3c38 <unknown>
#2 0x000073e1e1aa <unknown>
#3 0x000073e1d96e <unknown>
#4 0x000073e1defa <unknown>
#5 0x000074af6364 <unknown>
#6 0x000074302878 <unknown>
#7 0x0000742c8fee <unknown>
#8 0x0000742c9f44 <unknown>
#9 0x0000742ca21e <unknown>
#10 0x0000742cac4c <unknown>
#11 0x0000742c87b2 <unknown>
#12 0x0000742da4f6 <unknown>
#13 0x000073ed9d38 <unknown>
#14 0x000073eda03c <unknown>
#15 0x0000742e9aec <unknown>
#16 0x0000742e71dc <unknown>
Aborted
Note 5: On rpi and depending on what is insinde the .config, more GPU
memory should be allocated to run properly qt samples.
#0 0x0000742c63de <unknown>
#1 0x0000742d0c38 <unknown>
#2 0x0000749d7bde <unknown>
#3 0x0000749e3c70 <unknown>
#4 0x00007530227c <unknown>
#5 0x000075302480 <unknown>
#6 0x0000752fb1e4 <unknown>
#7 0x00007430f878 <unknown>
#8 0x0000742d5fee <unknown>
#9 0x0000742d6f44 <unknown>
#10 0x0000742d721e <unknown>
#11 0x0000742d7ad6 <unknown>
#12 0x0000742d57b2 <unknown>
#13 0x0000742e74f6 <unknown>
#14 0x0000742f6a74 <unknown>
#15 0x0000742f41dc <unknown>
Received signal 6
#0 0x0000742c63de <unknown>
#1 0x0000742c66a0 <unknown>
#2 0x0000725b5d10 <unknown>
[end of stack trace]
qml: Render process exited with code 256 (abnormal exit)
# mount /dev/mmcblk0p1 /mnt
# sed '/^gpu_mem_/s,=.*,=200,' -i /mnt/config.txt
# umount /mnt
Note 6: The first patch fixes a build issue when samples are compiled
without the support of printing [4]. This patch is already merged in
branch 5.9 [5] and concerns only 5.9.1.
085c2c52 Always compile QWebEnginePage::print
It fixes the error below.
.obj/browsermainwindow.o: In function `BrowserMainWindow::printRequested(QWebEnginePage*)': browsermainwindow.cpp:(.text+0x2cc0): undefined reference to `QWebEnginePage::print(QPrinter*, QWebEngineCallback<bool> const&)'
The second patch loads both libEGL and libGLESv2 symbols implicitly
instead of loading them with explicitly using hard-coded locations. It
fixes a bug when providers of lib*GL does not create libraries named
libEGL.so.1 and libGLESv2.s2 [6]. This patch is already merged in branch
5.9 [7].
d4c621f6 Load libEGL and libGLES2 symbols implicitly
It fixes the error below.
[327:347:1221/085837:ERROR:surface_factory_qt.cpp(68)] Failed to load /usr/lib/libGLESv2.so.2: /usr/lib/libGLESv2.so.2: cannot open shared object file: No such file or directory
[1]: http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2]: https://patchwork.ozlabs.org/patch/640633/
[3]: https://patchwork.ozlabs.org/patch/791332/
[4]: https://bugreports.qt.io/browse/QTBUG-61510
[5]: https://codereview.qt-project.org/#/c/198041/
[6]: https://bugreports.qt.io/browse/QTBUG-57761
[7]: https://codereview.qt-project.org/#/c/199554/
Cc: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout:
- move more dependencies to _ARCH_DEPENDS;
- mention all toolchain dependencies in the comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add the possibility to choose more test tools than only integck
from the MTD utils test-suite.
Move the hidden BR2_PACKAGE_MTD_TESTS configuration to the bottom
of the page and make it visible. When checked, a new list of available
binaries is displayed and may be selected and compiled into the image
with the --enable-install-tests configure script option:
- flash_torture
- flash_stress
- flash_speed
- nandbiterrs
- flash_readtest
- nandpagetest
- nandsubpagetest
Most of these tests may be performed by inserting kernel modules
which are almost legacy so having the userspace tools available
might become useful.
Legacy handling for users who had BR2_PACKAGE_MTD_INTEGCK selected is
not needed: they also have the BR2_PACKAGE_MTD_TESTS option enabled in
their .config. That option has now become a selectable option so it is
not removed any more by oldconfig.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
[Arnout:
- fix threads and MMU dependency;
- order Config.in options and mtd.mk lines alphabetically;
- add note on legacy handling to commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
Commit cef57c9642 added
bananapi_m2_plus_defconfig but forgot to update .gitlab-ci.yml. Do it
now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
grub is no longer maintained: it is stuck at version 0.97 with huge
patches that have no opportunity to be applied upstream, as upstream
has even renamed it grub-legacy.
Besides, it no longer builds correctly with recent binutils versions,
and even the huge patches we could grab from Debian do not help the
slightest.
Since upstream really considers it dead, and there are at least two
alternatives (grub2 and syslinux), just remove grub.
Add a legacy entry.
Remove the test cases as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add license file hashes and use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: Add license file hash, use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DAHDI is the 'framework' to drive actual telehony cards. Using telephony
cards without signalling is pretty much meaningless, so signalling will
be added in later commits.
libtonezone is provided by dhadi-tools, while the dahdi headers are
provided by dahdi-linux. Go figure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also provides libraries, so install in staging as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dahdi-linux provides kernel modules to drive a variety of telephony
cards, ranging from low-end one-channel to higher-end multi-channel
cards. It also provides headers for userland to talk to those cards.
With a bit of love, dahdi-linux can use our kernel-module
infrastructure. Wee! :-)
Still, there are a few specificities about dahdi-linux.
First, it needs to install a few binary firmware blobs, which it wants
to download at install time. Since we do want to be able to do
completely off-line builds, we need to downlaod them manually. So we
have the full list of firmware blobs (even if some can only be used on
an i386/x86_64 target, we still uconditionally download them), for which
we have locally-computed sha256 (no hash provided by upstream for the
blobs).
Second, the install procedure for the firmware blobs needs to have
access to the Linux kernel .config file, so it can decide whether to
install the blobs or not. We can force not to install them, but we can't
force to install them... :-/ And anyway, we'd have to do the same check
as is already done by dahdi-linux, so no need to duplicate that.
Finally, the licensing is relatively weird. Although it is obvious and
straightforward for the most part of dahdi-linux, consisting of mostly
GPLv2 and a few LGPLv2.1, there is one gotcha.
Of the firmware blobs, one is provided as a .o file, with no licensing
information whatsoever, without any source available from upstream, but
is directly linked to a GPLv2 file.
This is very concerning, but there is not much we can do about it,
except delegate to the legal reviewer whether that is acceptable or not.
AS an aside, dahdi-linux drivers do not build with a kernel 4.0 or
later, as it uses internals that have been removed in linux-4.0. There
has been no update upstream dahdi-linux to fix that. There's not much we
can do, except warn the user in the help text.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: use SPDX license names and add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
asterisk uses backtrace() from execinfo.h to print beuatiful backtraces
when it fails. But execinfo is only reliably available with glibc, while
it is optionbal in uClibc and completely missing in musl.
So, only enable backtrace support for glibc toolchains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Asterisk: the flagship of telephony on Linux. These are the lines of
code whose continuous mission is to power small and large enterprises
telephony systems, to boldly provide IP PBX where no one has done so
before.
But it is a hell to get compiled... :-(
For starters, it needs a host tool, menuselect, to prepare its build
configuration. Unfortunately, the way it handles menuselect does not
apply very well for cross-compilation: the main ./configure calls out to
menuselect's own ./configure, and of course that runs with the same
environement, which is wrong for cross-compilation (because of variables
like CC, CFLAGS and the likes).
Furthermore, the paths to menuselect are imbricated about everywhere in
the main Makefile, so making it find menuselect in PATH is a lost cause.
Instead, we just patch-out the handling of menuselect, build it as the
host variant and copy it in place.
Now, asterisk wants to install a default set of sound files (for
answering machine stuff, I guess). They come come pre-bundled in the
official archive [0], but the buildsystem will want to download (at
install time) the sha1 files for each sound archive, to validate that
said archive is correct. However, the download is done via plain http,
so it still risks an MITM attack. And for Buildroot, it is not always
possible to download at install time, so we patch-out the sha1 check.
[0] http://downloads.asterisk.org/pub/telephony/asterisk/releases/
The official archive contains the sound archives plus a full set of
documentation. This makes it very big. Unfortunately, the hosting site
is rather slow, topping at about ~204kbps. So we get the archive from
the official mirror on Github. But that archive is missing the sound
archives, so we download them separately.
Some tests, like the crypt() one, are broken and could not have ever
possibly worked at all. Worse, the FFmpeg test is looking for headers
that FFmpeg removed more than 10 years ago and are virtually no longer
available in any distro. So, FFmpeg support is definitely not tested
by upstream and can't possibly work at all. Finally, trying to run
test-code does not work in cross-compilation.
As a final stroke of genius, asterisk checks for the re-entrant variant
of res_ninit(), and concludes that all such functions are available,
including res_nsearch(). Uclibc-ng has the former but not the latter, so
the build fails. Since there is no cache variable for that check, we
can't pre-feed that result to configure, and fixing it is a bigger
endeavour. So we make asterisk depend on glibc for now, until someone
is brave enough to fix it.
Almost all features are disabled for now. Support for additional
features will be added in subsequent patches now that we have a working
base.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- make libilbc a mandatory dependency instead of using the bundled one;
- add license, license files, and license file hashes;
- minor spelling corrections;
- remove redundant trailing backslash reported by check-package;
- rewrap help text to 72 columns instead of 68]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
MPD version 0.20 is affected by GCC bug 64735 and failes to build for
some archictuctures (NIOSII, ARMv4, ARMv5 and SPARCv8) with a GCC
toolchain less then version 7.
We added a version choice between 0.19 and 0.20 in Buildroot version
2017.02 as GCC 7 was not yet available at that time. This way, mpd could
still be build for those architectures.
As GCC 7 is now available in Buildroot remove the version choice for 0.19.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only a static library is built (and no _INSTALL_TARGET_CMDS are defined), so
there is no need to run the target-install step.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NS_ENABLE_SSL was renamed to MG_ENABLE_SSL in v6.0, commit e1dd3f06fe33
(Rename Mongoose constants: NS_ -> MG_, NSF_ -> MG_F_), so use the new name
instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No linking is done since the package was reworked for v6.x in commit
9860746ff (mongoose: bump to version 6.1), so drop LDFLAGS and the list of
libraries to link against.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This define is not used anywhere in the mongoose sources since v6.0 (commit
8927c9d22b3f), so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch fixing CVE-2017-14062:
Integer overflow in the decode_digit function in puny_decode.c in
Libidn2 before 2.0.4 allows remote attackers to cause a denial of
service or possibly have unspecified other impact.
This issue also affects libidn.
Unfortunately, the patch also triggers reconf of the documentation
subdirectory, since lib/punycode.c is listed in GDOC_SRC that is defined
in doc/Makefile.am. Add autoreconf to handle that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-2862 - An exploitable heap overflow vulnerability exists in the
gdk_pixbuf__jpeg_image_load_increment functionality of Gdk-Pixbuf 2.36.6. A
specially crafted jpeg file can cause a heap overflow resulting in remote
code execution. An attacker can send a file or url to trigger this
vulnerability.
CVE-2017-2870 - An exploitable integer overflow vulnerability exists in the
tiff_image_parse functionality of Gdk-Pixbuf 2.36.6 when compiled with
Clang. A specially crafted tiff file can cause a heap-overflow resulting in
remote code execution. An attacker can send a file or a URL to trigger this
vulnerability.
CVE-2017-6311 - gdk-pixbuf-thumbnailer.c in gdk-pixbuf allows
context-dependent attackers to cause a denial of service (NULL pointer
dereference and application crash) via vectors related to printing an error
message.
The host version now needs the same workaround as we do for the target to
not pull in shared-mime-info.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems github now sometimes provides slightly changed tarballs which
produce a different sha256 hash than before. This commit fixes the
hashes of the packages when sources.buildroot.net does not store a copy
of the tarball matching the current hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install tools into /usr/bin, not /usr/local/bin, since /usr/local/bin
is not in PATH by deafault.
[Peter: set PREFIX to /usr to really install into /usr/bin]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Python3 version to 3.6.2.
Patches dropped:
"Support PGEN_FOR_BUILD and FREEZE_IMPORTLIB_FOR_BUILD"
Rationale: With commit 9d02f562961efd12d3c8317a10916db7f77330cc, code
generation step of building CPython now became explicit (instead of
always performed as a part of 'make' invocation) and more granular. We
no longer need to use Parser/pgen at all and tricking the build system
into using different Programs/_freeze_importlib can be done as a part
of recipe.
Additional info about the build change can be found at
https://bugs.python.org/issue23404
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a hash for the license file while we're at it.
[Peter: use tuxfamily.org URL for annoucement]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7555 - Augeas versions up to and including 1.8.0 are
vulnerable to heap-based buffer overflow due to improper handling of escaped
strings. Attacker could send crafted strings that would cause the
application using augeas to copy past the end of a buffer, leading to a
crash or possible code execution.
[Peter: extend description]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches with renames apply properly with patch >= 2.7, but not with
older patch versions. Since "git format-patch" by default generates
patches with renames, Buildroot developers often don't realize that
their patches will not apply properly on build machines that have
patch < 2.7. In order to prevent such a situation from happening
again, this commit adds some logic in apply-patches.sh to refuse
applying patches that contain renames.
Note that just searching for '^rename' is not sufficient, since the
patch commit message may contain the words "rename from" or "rename to"
as well. Therefore, the grep expression is made as accurate as possible,
checking both.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: spaces instead of tabs (suggested by Yann);
extend commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When using an external toolchain that was built with Buildroot and a
merged /usr, the dynamic linker is actually in /usr/lib.
But the check_glibc macro limits the depth it is looking for the dynamic
linker, and misses it when it is in /usr/lib because it is too deep.
We could fix that in two ways: increase the depth in which we look
for it, or follow symlinks. We choose the second solution.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This bump
54e63e3f9a...303f418e1a
updated the transcoding support already present:
014bb9505e
To avoid these build errors
src/transcoding/codec/codecs/libs/libx26x.c:105:18: fatal error: x264.h: No such file or directory
#include <x264.h>
src/transcoding/codec/codecs/libs/libx26x.c:213:18: fatal error: x265.h: No such file or directory
#include <x265.h>
src/transcoding/codec/codecs/libs/libopus.c:23:31: fatal error: opus/opus_defines.h: No such file or directory
#include <opus/opus_defines.h>
we need to add dependency handling already with this patch and keep the
hard dependency x264 as minimum codec for transcoding but we now need
to enable BR2_PACKAGE_FFMPEG_GPL to enable x264-support also in ffmpeg.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
014bb9505e
extended the already present transcoding support and included vaapi-
accelerated transcoding.
In order to support these new options and their numerous dependencies
we add a new Kconfig option for transcoding support to allow users to
disable transcoding support, because they use tvheadend for recording
or by its internal hts protocol, for example with the kodi-pvr-hts
addon.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Mostly to compile imx-lib (providing libpxp) on i.MX6UL (which have a
PXP hardware unit) and to prevent compilation of imx-lib's modules not
supported on i.MX6UL.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some changes in addition to the version bump:
- The uint32_t patch is now upstream
- Drop --no-glib12 flag as support was removed in 2.0.23
- The host library path patch was refreshed
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: remove uint32_t patch from hash file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-cmake even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
XSA-226: multiple problems with transitive grants (CVE-2017-12135)
XSA-227: x86: PV privilege escalation via map_grant_ref (CVE-2017-12137)
XSA-228: grant_table: Race conditions with maptrack free list handling
(CVE-2017-12136)
XSA-230: grant_table: possibly premature clearing of GTF_writing /
GTF_reading (CVE-2017-12855)
XSA-231: Missing NUMA node parameter verification (CVE-2017-14316)
XSA-232: Missing check for grant table (CVE-2017-14318)
XSA-233: cxenstored: Race in domain cleanup (CVE-2017-14317)
XSA-234: insufficient grant unmapping checks for x86 PV guests
(CVE-2017-14319)
XSA-235: add-to-physmap error paths fail to release lock on ARM
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-pkgconf even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The download location got changed two years ago when the version was bumped
to 0.9.12, but the upstream URL in Config.in wasn't updated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
I'm going to leave current company and
this mail address is going to become invalid.
Signed-off-by: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-cmake will optionally link with openssl for the embedded copy of
libarchive if available, leaking host dependencies and possibly causing
build issues in case of compatibility issues - E.G. the host-cmake version
we have in 2017.02.x doesn't build against openssl-1.1.0+:
https://github.com/libarchive/libarchive/issues/810
The openssl support in libarchive is unlikely to be needed, so explicitly
disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000250 - All versions of the SDP server in BlueZ 5.46 and
earlier are vulnerable to an information disclosure vulnerability which
allows remote attackers to obtain sensitive information from the bluetoothd
process memory. This vulnerability lies in the processing of SDP search
attribute requests.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit be8e32d585 ("netsnmp: configurable MIB modules"),
the list of MIB modules can be selected with a configuration option.
However, there was still an hardcoded list of MIB files to exclude from
the target filesystem.
Since it is complicated to know which MIB files are necessary according
to the configuration, let's install all of them.
Cc: przemyslaw <przemyslaw.wrzos@calyptech.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Added upstream patch to fix build error:
move.o: In function `do_page_up':
move.c:(.text+0x150): undefined reference to `leftedge_for'
move.o: In function `do_page_down':
move.c:(.text+0x20c): undefined reference to `leftedge_for'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There aren't really any changes that matter for the buildroot image,
but the project has been moved over to kernel.org and is now available
in a release tarball, so simplify the .mk file by removing any
autoreconf stuff.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch fixing compilation on the systems without C++ compiler.
Also add licence hashes.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This also moves the source tree to the new official upstream location at
ibm-power-utilities GitHub organisation.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mbimcli and mbim-network are GPLv2+ (COPYING file applies) and
libmbim-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qmicli, qmi-network and qmi-firmware-update are GPLv2+ (COPYING file
applies) and libqmi-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ModemManager and mmcli are GPLv2+ (COPYING file applies) and
libmm-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Force gzip compression level 6 when calculating hash of a downloaded GIT repo.
To make sure the tar->gzip->checksum chain always provides consistent result.`
The script was relying on the default compression level, which must not be
necessarily consistent among different gzip versions. The level 6 is gzip's
current default compression level.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fscryptctl is a low-level tool written in C that handles raw keys and
manages policies for Linux filesystem encryption.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 and kernel to 4.12.12 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Memory references to DI mode objects could incorrectly be created at
offsets that are not supported by instructions l32i/s32i, resulting in
ICE at a stage when access to the object is split into access to its
subwords:
drivers/staging/rtl8188eu/core/rtw_ap.c:445:1:
internal compiler error: in change_address_1, at emit-rtl.c:2126
Fixes: https://lkml.org/lkml/2017/9/10/151
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of integer overflows and DoS issues.
[Peter: explain security impact]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
Add an upstream patch fixing build without python.
Add two more patches (one of them upstream) fixing cross compile of the
python client library.
Enable devinput and uinput unconditionally to suppress non cross compile
compatible host checks.
Set DEVINPUT_HEADER to target header of input events to avoid use of
host header.
Add python3 as optional dependency.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patch applied upstream, switched to cmake-package following
upstream removal of autoconf.
Short summary of changes:
version 1.0.1
- switched from autoconf to cmake
version 1.0.0:
- fixed CVE-2014-8242
- project moved to github
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the SixXS project has ceased its operation on 2017-06-06,
the aiccu utility has been removed.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add optional dependency on libcap, which exists since this version
bump.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
[Thomas: add explicit --with-libcap.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-11610 - The XML-RPC server in supervisor before 3.0.1, 3.1.x
before 3.1.4, 3.2.x before 3.2.4, and 3.3.x before 3.3.3 allows remote
authenticated users to execute arbitrary commands via a crafted XML-RPC
request, related to nested supervisord namespace lookups.
For more details, see
https://github.com/Supervisor/supervisor/issues/964
While we're at it, add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We unfortunately cannot use the upstream patches directly as they are not in
'patch -p1' format, so convert them and include instead.
Fixes:
CVE-2017-0899 - RubyGems version 2.6.12 and earlier is vulnerable to
maliciously crafted gem specifications that include terminal escape
characters. Printing the gem specification would execute terminal escape
sequences.
CVE-2017-0900 - RubyGems version 2.6.12 and earlier is vulnerable to
maliciously crafted gem specifications to cause a denial of service attack
against RubyGems clients who have issued a `query` command.
CVE-2017-0901 - RubyGems version 2.6.12 and earlier fails to validate
specification names, allowing a maliciously crafted gem to potentially
overwrite any file on the filesystem.
CVE-2017-0902 - RubyGems version 2.6.12 and earlier is vulnerable to a DNS
hijacking vulnerability that allows a MITM attacker to force the RubyGems
client to download and install gems from a server that the attacker
controls.
For more details, see
https://www.ruby-lang.org/en/news/2017/08/29/multiple-vulnerabilities-in-rubygems/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bind autoconf scripts look for lmdb.h in /usr/include (even when
cross-compiling). When liblmdb-dev is installed, this causes the
following error:
...
checking for lmdb library... yes
checking for library containing mdb_env_create... no
configure: error: found lmdb include but not library.
Fix this by disabling explicitly lmdb support.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
strace moved to a new homepage as upstream commit 2bba131575878 (Update
homepage URL) indicates.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2016-8687: Stack-based buffer overflow in the safe_fprintf function
in tar/util.c in libarchive 3.2.1 allows remote attackers to cause a
denial of service via a crafted non-printable multibyte character in a
filename.
CVE-2016-8688: The mtree bidder in libarchive 3.2.1 does not keep track
of line sizes when extending the read-ahead, which allows remote
attackers to cause a denial of service (crash) via a crafted file, which
triggers an invalid read in the (1) detect_form or (2) bid_entry
function in libarchive/archive_read_support_format_mtree.c.
CVE-2016-8689: The read_Header function in
archive_read_support_format_7zip.c in libarchive 3.2.1 allows remote
attackers to cause a denial of service (out-of-bounds read) via multiple
EmptyStream attributes in a header in a 7zip archive.
CVE-2016-10209: The archive_wstring_append_from_mbs function in
archive_string.c in libarchive 3.2.2 allows remote attackers to cause a
denial of service (NULL pointer dereference and application crash) via a
crafted archive file.
CVE-2016-10349: The archive_le32dec function in archive_endian.h in
libarchive 3.2.2 allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted file.
CVE-2016-10350: The archive_read_format_cab_read_header function in
archive_read_support_format_cab.c in libarchive 3.2.2 allows remote
attackers to cause a denial of service (heap-based buffer over-read and
application crash) via a crafted file.
CVE-2017-5601: An error in the lha_read_file_header_1() function
(archive_read_support_format_lha.c) in libarchive 3.2.2 allows remote
attackers to trigger an out-of-bounds read memory access and
subsequently cause a crash via a specially crafted archive.
Add upstream patch fixing the following issue:
CVE-2017-14166: libarchive 3.3.2 allows remote attackers to cause a
denial of service (xml_data heap-based buffer over-read and application
crash) via a crafted xar archive, related to the mishandling of empty
strings in the atol8 function in archive_read_support_format_xar.c.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change setup type to setuptools.
Add a patch removing the pytest-runner dependency. The patch was sent
upstream.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Qt package currently fails to build on ARMv8 cores in 32-bit mode
(for example, if you select ARM and then Cortex-A53), because the ARM
atomic operation implementation in Qt checks if we're on ARMv7, then
on ARMv6, and otherwise falls back to an ARMv5 implementation. The
latter uses the swp instruction, which doesn't exist on ARMv8, causing
a build failure.
To solve this, we simply add a patch that uses the ARMv7 atomic
operations for ARMv8-A.
There is no autobuilder reference because we don't have any ARMv8
32-bit configuration in the autobuilders.
Cc: <ivychend@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-12938 - UnRAR before 5.5.7 allows remote attackers to bypass a
directory-traversal protection mechanism via vectors involving a symlink to
the . directory, a symlink to the .. directory, and a regular file.
CVE-2017-12940 - libunrar.a in UnRAR before 5.5.7 has an out-of-bounds read
in the EncodeFileName::Decode call within the Archive::ReadHeader15
function.
CVE-2017-12941 - libunrar.a in UnRAR before 5.5.7 has an out-of-bounds read
in the Unpack::Unpack20 function.
CVE-2017-12942 - libunrar.a in UnRAR before 5.5.7 has a buffer overflow in
the Unpack::LongLZ function.
For more details, see
http://www.openwall.com/lists/oss-security/2017/08/14/3
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-6362: Double-free in gdImagePngPtr()
CVE-2017-7890: Buffer over-read into uninitialized memory
Drop patches no more needed:
0001-gdlib-config.patch: @LIBICONV@ is nowadays correct AC_SUBST'ed by
configure
0002-gd_bmp-fix-build-with-uClibc.patch: upstream uses ceil() since
6913dd3cd2
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to 4.13 kernel and remove all the dts patches as they
are part of upstream now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libqmi library and tools come with several optional features that
may be enabled or disabled during build.
This patch adds support to automatically enable or disable them based
on the presence of the required dependencies for each:
* QMI-over-MBIM is enabled if libmbim is selected.
* udev support in qmi-firmware-update is enabled if libgudev is
selected.
* MM runtime check in qmi-firmware-update is enabled if ModemManager
is selected (but we don't build-depend on it, the runtime check is
done using plain glib2 DBus operations).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps web2py to the latest version R-2.15.4 and bumps
also the python-pydal dependency to the required latest version 17.8.
Starting with version R-2.15.x web2py supports also python 3, so
updating the package to support both versions.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps lcdproc to version 0.5.9, and switches to the new
upstream on github.
The new version also compiles with musl without any patches.
Signed-off-by: Sven Haardiek <sven.haardiek@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream migrated to automake for autotools: the "installlib" target
no longer exist, and we can use the standard "install" target, and
therefore drop the special INSTALL_STAGING_OPTS and
INSTALL_TARGET_OPTS variables.
Add license hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
minnowboard_max-graphical_defconfig has the line "BR_TARGET_GRUB2=y",
but this currently has no effect because BR_TARGET_GRUB2 cannot be
selected without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by
default.
The minnowboard max defconfig was updated to fix this problem, but the
graphical variant was not updated alongside it.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The galileo_defconfig has the line "BR_TARGET_GRUB2=y", but this
currently has no effect because BR_TARGET_GRUB2 cannot be selected
without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by default.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 44b5637ab2 (e2fsprogs: add a patch to link against SEM_INIT libs)
introduced a patch that effectively adds -lpthread to the link command
with libcom_err. Today the only libc with separate libpthread is glibc
that does not support static build. The generated libcom_err.so.2.1
library links with libpthread with or without this patch. Drop this
patch.
Cc: Daniel Mack <daniel@zonque.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c96b8675ea
("support/scripts/check-bin-arch: ignore symbolic links") was bogus,
because it tested ${f}, which is the relative path of the file inside
${TARGET_DIR}, so we end up testing if ${f} on the system is a
symbolic link.
This commit fixes that by testing ${TARGET_DIR}/${f}.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit da32b49f00
("instrumentation: extend packages-file-list.txt with symlinks and
directories"), the packages-file-list.txt also contains symbolic
links. Therefore, check-bin-arch is now also checking symbolic links.
However, symbolic links in $(TARGET_DIR) can have absolute path as
targets, such as:
$ ls -l output/target/sbin/ifdown
lrwxrwxrwx 1 thomas thomas 10 Sep 3 15:55 output/target/sbin/ifdown -> /sbin/ifup
Therefore, we are now potentially checking a host binary, which
obviously makes check-bin-arch fail.
This commit changes check-bin-arch to ignore symbolic links. Indeed,
we have two cases:
- The symbolic link really points to something that will in the
rootfs (such as /sbin/ifup above). In this case, /sbin/ifup will be
checked separately by check-bin-arch.
- The symbolic link doesn't point to something that will be in the
rootfs, and that is not a problem from the perspective of
check-bin-arch, which checks the architecture of target binaries.
Fixes:
http://autobuild.buildroot.net/results/16d384a0183d477646ac7692feb65f00dde7d068/
(vim)
http://autobuild.buildroot.net/results/50429c0f63a8befff9e20899327b9a8d754d99be/
(ifupdown)
http://autobuild.buildroot.net/results/1db65973e782bfa61abcbccd3501bfd235f77288/
(gawk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to https download for firewall compatibility and security.
As upstream now defaults to 'gpg' for the main binary name, keep the
'gpg2' name as in previous releases, to avoid conflict with the gnupg
package.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
curlbuild.h was removed in recent versinos of curl, backporting a
patch from mainline to fix it until a newer version of sysdig is
released.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide the path to HOST_DIR for libxml, libxslt and libiconv like for
the target variant to avoid a build issue on host where /bin is a
symlink to /usr/bin.
Indeed, the configure script use a custom m4 macro XSTAR_LIB_CHECK to
find xml2-config:
XSTAR_LIB_CHECK([LIBXML], [xml2-config])
This macro come from a local m4 file m4/xstar-check-libs.m4 where it
use:
AC_PATH_PROG(LIBXXX()_CONFIG, xxx_config(),
[], [$LIBXXX()_PREFIX/bin$PATH_SEPARATOR$PATH]
Since no prefix seems to be defined by $LIBXXX()_PREFIX, AC_PATH_PROG
look by itself at /bin/ for xml2-config. So the PATH variable set
by Buildroot containing HOST_DIR/bin is ignored.
The wrong xml2-config is used during the build and the build fail
when no xml2 headers are installed on the host.
Fixes:
src/xml_C14N.c:12:31: fatal error : libxml/xmlversion.h : No such file or directory
#include <libxml/xmlversion.h>
^
In file included from src/trans.c:4:0:
src/trans.h:32:30: fatal error : libxml/xmlmemory.h : No such file or directory
#include <libxml/xmlmemory.h>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: remove french messages from the commit log, drop
--with-libiconv-prefix option, since we don't have a libiconv
dependency for the host.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ts4900 defconfig is upstream in Linux since v4.9:
a2f1145 ARM: dts: TS-4900: add basic device tree
Bump kernel version to v4.12 and use the upstreamed defconfig
imx_v6_v7.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change extends to the login utilities the current policy of having
a selection item in the configuration menu for each utility that has an
--enable/--disable knob in the "configure" script:
- add selection items for login, runuser, su and sulogin (there was
already an item for "last")
- move "login utilities" to Config.in.legacy
- make "login utilities" select last, login, runuser, su and sulogin
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel help-text states, "The ext4 filesystem requires that this feature
be enabled <...> otherwise, it will refuse to mount in the read-write
mode any filesystems that use the huge_file feature, which is enabled by
default by mke2fs.ext4."
If the rootfs is to be (re)mounted rw at boot, this must be set for the
system to successfully come up.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building 3.1.9 still fails after removing patch 0002:
volume.c:383:26: error: 'ldap_config_valid' undeclared (first use in this function)
if (!ldap_config_valid || vol->v_flags & AFPVOL_NONETIDS)
Bumping to 3.1.11 solves the problem.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 72e89edfcb. Due to
some change in fontconfig, it tries to re-generate a file using
gperf. Adding a dependency on host-gperf would solve the problem, but
really this is an upstream bug that should be reported and fixed
rather than worked around by adding the host-gperf dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61c4c63 (package/lzo: switch to cmake), building lzo has switched
from autotools to cmake. In the conversion, we've lost the build of the
shared library, because the cmake-based buildsystem of lzo explcitly
disables it by default.
Restore the shared library build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the recent NLS rework, BR2_ENABLE_NLS doesn't imply the absense of --disable-nls, so
configure may fail with:
configure: error: "The gtk client cannot be built without nls support. Try adding either --enable-nls or --without-gtk"
So adjust the dependencies to use BR2_SYSTEM_ENABLE_NLS instead.
As mentioned by Arnout, an alternative solution could be to explicitly pass
--enable-nls as the stub functions are now available everywhere - But I went
with the dependency for consistency reasons.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following configure issue:
checking for GTK... no
configure: error: Package requirements (gtk+-3.0 >= 3.4.0
glib-2.0 >= 2.32.0
gio-2.0 >= 2.26.0,
gmodule-2.0 >= 2.32.0
gthread-2.0 >= 2.32.0) were not met:
libgtk2 support was dropped in commit cdd71c642724 ((trunk gtk) #4970 remove
deprecated GTK+ API calls, raise GTK+ dependency to 3.2) which was part of
transmission-2.61.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are the changes implemented:
* Remove dbus-glib as a dependency, as it isn't required since
ModemManager 1.0, which is based on libglib2's GDBus
implementation.
* Remove udev as a dependency, as the ModemManager build only needs
the libgudev package.
* Explicitly set libglib2 as dependency, which currently was being
implicitly included by libgudev. The next major ModemManager
release will have udev/libgudev as optional packages, while
libglib2 is definitely not going to be ever optional.
* Add a comment explaining that dbus is only a runtime dependency.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
- properly handle the NLS cases, by adding two patches
- use sha256 locally calculated hash for the tarball, add hash for
the license file
- fix the license information: it's GPL-2.0 licensed, and the license
file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.
In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tweak 0003-Sanitize-the-installation-process.patch for 2.2.4
Tweak 0004-Remove-PIE-flags-from-the-build.patch for 2.2.4
Remove 0005-Fix-static-linking-with-GnuTLS.patch as it was merged upstream
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 fails to configure when BR2_SSP_ALL is enabled, with the following
configure error:
checking whether -fno-asynchronous-unwind-tables works... yes
checking whether -fno-unwind-tables works... yes
checking for target linking format... unknown
configure: error: no suitable link format found
This can be worked around by enforcing -fno-stack-protector in the
package CFLAGS in a way that overrides the SSP flag, as is already done
for the valgrind package.
Fixes bug #10261.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reported-by: Dr I J Ormshaw <ian_ormshaw@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-0379: Mitigate a local side-channel attack on Curve25519
dubbed "May the Fourth be With You".
As we are close to release, don't update to the latest 1.8.1 version,
but to a maintenance release from the 1.7 branch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mitigate a flush+reload side-channel attack on RSA secret keys
dubbed "Sliding right into disaster". For details see
<https://eprint.iacr.org/2017/627>. [CVE-2017-7526]
Switch to https site for better firewall compatibility and security.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
clock_gettime is defined locally, and calls pth_int_time, which
in turn calls clock_gettime.
The USB backend shouldn't overrule clock_gettime in the first place.
This patch fixes this endless recursion by removing the local defition.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1b974425 (MIPS: add support for M6201 cores) explained that the
new core was not supported by upstream gcc, and as of gcc-8-trunk
that's still the case.
Ditto for 3cfbeb83 (MIPS: add support for P6600 cores).
This means that we currently allow to build an internal tolchain for
those cores, yet we have no suitable gcc version.
Disable the internal backend in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-vim is needed to provide the xxd tool, otherwise the build fails
with:
checking for xxd... no
configure: error: "xxd is required (provided by vim package)"
This isn't noticed by the autobuilders, presumably because all of them
have vim installed locally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vim contains a tool called xxd, which is needed by mediastreamer on
the host as part of its build process. Therefore, this commit
introduces a host variant for the vim package, that will be used by
mediastreamer.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f837251785 ("package/libv4l:
allow build of v4l2 utilities on noMMU platforms"), Hugues Fruchet
added a bunch of patches to libv4l in order to allow the v4l utilities
to be built on noMMU platforms.
However, as part of those patches, he entirely disabled the build of
libv4l in static linking configurations, because libv4l uses
dlopen(). Unfortunately, this breaks the build of applications like
mediastreamer in static linking configurations, and generally makes
our libv4l packages a little bit awkward: you can enable it, but it
doesn't install anything (in static linking configurations).
A closer look shows that dlopen() is only used by libv4l for plugin
support, and libv4l only provides one single plugin, and its build is
already conditional. Therefore, this commit adds yet another patch to
libv4l, which re-enables the build of libv4l, but disables the
plugin-related logic when plugin support is disabled (and it was
already automatically disabled in static linking configurations).
While at it, we update the comment in libv4l.mk that lists the patches
that makes autoreconf necessary.
Fixes the build of mediastreamer:
http://autobuild.buildroot.net/results/af091cfd0508df9395778cdc796f77e95c168410/
Cc: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is much smaller the the previous one and will unlikely cause
a conflict with some forthcoming 2.30.x release.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit will enable tpuarts in eibd as well. tpuarts is as
important as FT1.2 support, which is already enabled by default.
This causes a 8 KB increase of the installed size in /usr/bin (728 KB
instead of 720 KB for /usr/bin), so not enough to justify a separate
configuration option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to cc-tool that fixes the boost.m4 logic used
to detect the linker rpath option so that it works properly with
static linking and additional libraries passed in LIBS.
This is the second step to fix static linking of cc-tool on
architectures like SPARC that need to link against libatomic:
http://autobuild.buildroot.net/results/ed9f2524d0ccef318ff1bc99e5dea980111de989/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like -lpthread was passed in LIBS, -latomic should also be passed
in LIBS. In order for this to work, we however need to first fix
cc-tool's Makefile.am so that it does not overwrite LIBS.
This is the first part of fixing the build of cc-tool in a static
linking scenario on SPARC, i.e to fix:
http://autobuild.buildroot.net/results/ed9f2524d0ccef318ff1bc99e5dea980111de989/
The patch has been merged upstream, in
553f9c6016.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added all hashes provided by upstream.
Removed dependency to mtdev after:
167bbb6d10
libdrm is now a hard dependency:
b030897b38
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: drop "select BR2_PACKAGE_LIBDRM" from sub-option, now that it
is selected by the main option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Release notes: https://mariadb.com/kb/en/mariadb-10126-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10126-changelog/
Fixes the following security vulnerabilities:
CVE-2017-3636 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.56 and earlier and 5.6.36 and earlier. Easily exploitable vulnerability
allows low privileged attacker with logon to the infrastructure where MySQL
Server executes to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized update, insert or delete access to
some of MySQL Server accessible data as well as unauthorized read access to
a subset of MySQL Server accessible data and unauthorized ability to cause
a partial denial of service (partial DOS) of MySQL Server.
CVE-2017-3641 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DML). Supported versions that are affected are
5.5.56 and earlier, 5.6.36 and earlier and 5.7.18 and earlier. Easily
exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful
attacks of this vulnerability can result in unauthorized ability to cause
a hang or frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2017-3653 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.56 and earlier, 5.6.36 and earlier and 5.7.18 and earlier. Difficult
to exploit vulnerability allows low privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized update, insert or delete
access to some of MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a config option to install the ql2xxx firmware binaries for QLogic
Fibre Channel adapters.
Since this doesn't quite fit under the existing categories in Config.in,
include it under a new category named "Fibre Channel Adapter Firmware".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Among other small fixes, the new version fixes crashes when running in
X11 without GLX (i.e. using EGL). Additionally, the changes from patch
"0002-Make-EGL-support-optional.patch" were committed upstream, and the
file can be dropped.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches continue to apply with no changes. 7.2.0 is a bugfix
release of the 7.x branch.
The only change that is not a simple bump is that the 7.2.0 tarball is
now available xz-compressed instead of bz2-compressed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind configure script explicitly links libunwind against
libgcc_s. libgcc_s is only guaranteed to be available for toolchains
that supports dynamic linking: pure static linking toolchains only
have libgcc.a, not libgcc_s.so.
Therefore, let's make libunwind unavailable on toolchains that lack
dynamic linking support. We could potentially support linking with
libgcc, but switching to libgcc_s was done upstream because libgcc was
lacking some symbols on ARM
(https://lists.nongnu.org/archive/html/libunwind-devel/2014-06/msg00024.html). Even
though recent gcc versions seem to provide such symbols in libgcc.a,
having libunwind available on static linking configurations is not a
useful enough use-case to do the necessary research to find when this
issue was fixed in gcc.
Since libunwind is not used as a mandatory dependency in any package,
adding this !BR2_STATIC_LIBS dependency is trivial and nicely avoids
the problematic situation.
This fixes two different autobuilder failures:
- Gstreamer 1.x programs failing to link, because libunwind links
against libgcc_s that isn't available (static linking
configuration):
http://autobuild.buildroot.net/results/9d4fbf7167e9afce0eef5c9e0cfd42c966ecba36/
- Gmrender-resurrect, which fails to link, because GStreamer 1.x uses
some libunwind functionality, but does not take into account the
libunwind dependency in its .pc files (static linking
configuration):
http://autobuild.buildroot.net/results/0a3a2485c187a000482c178f1e9c64dd716a858f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current commit is from Sep 23, 2016. Update to latest commit from
Jul 11, 2017 to add support for i.MX6ULL processors.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is similar to 350941e31d
("python: remove target Python packages from PYTHONPATH") but for
python3.
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/
inside the PYTHON3_PATH variable, which gets used to define
PYTHONPATH, passed to the host Python interpreter when
building/installing target packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
This change fixes the following build failures:
http://autobuild.buildroot.net/results/9005b89407e46b537a54cac6cc0c69dcac4dc5ea/
(python-cryptography)
http://autobuild.buildroot.net/results/395682d33d02fdcaa39d3c0326355bd9ea3d6feb/
(python-pynacl)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports three patches that are already upstream in
kvmtool fixing build warnings with musl. Those are not strictly needed
for the build to succeed, they just reduce the amount of warning
noise.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In Linux 4.12, the header <asm/msr-index.h> has been removed from the
set of headers exported to userspace. Therefore, it cannot be used by
kvmtool anymore. This commit takes the simple approach of duplicating
inside kvmtool the MSR_* definitions that were used from this
<asm/msr-index.h> header.
This fixes:
x86/kvm-cpu.c:7:27: fatal error: asm/msr-index.h: No such file or directory
#include <asm/msr-index.h>
Which is the second part of:
http://autobuild.buildroot.net/results/4459a909e735343d1cf768d30466bc3c57eca19e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 392b0a26f5 (toolchain-external: default BR2_TOOLCHAIN_EXTERNAL_PATH
to empty), calling 'make clean' or similar can yield a spurious stderr
message:
dirname: missing operand
Try 'dirname --help' for more information.
Which is definitely baffling and unsettling...
It turns out that it is pretty trivial to reproduce, and this defconfig
is just enough:
$ cat my-defconfig
BR2_TOOLCHAIN_EXTERNAL=y
$ make BR2_DEFCONFIG=$(pwd)/my-defconfig defconfig
$ make clean
dirname: missing operand
Try 'dirname --help' for more information.
[--snip--]
This is because the cross-compiler is not found in the PATH (and for
good reasons, I don't have it in the PATH, not even at all).
So, when the cross-compiler is not found in the path, we simply
continue as if all was good, and postpone the check to much later,
when we try to copy the toolchain libs...
So, use a make construct rather than calling to the shell: $(dir ...)
does not whine if passed nothing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Toradex V2.7 SDK, U-Boot image has changed from u-boot.imx to
SPL + u-boot.img.
Also fix U-Boot build error with GCC6.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2c8de6c4 (gcc 4.9.1: add patch for PR60102) removed the SPE
condition becasue of said PR, but forgot to remove the associated
comment, which has been tagging along all this time...
Remove it, it is no longer valid and causes confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The VC4 GPU does not support full GL, it only provides EGL.
Currently, it is possible to build the VC4 backend without EGL support,
but that does not make sense in the slighest.
So, forcibly enable EGL with VC4, like is done for etnaviv and virgl.
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a patch cherry-picked from libepoxy 1.4.2, which adds missing
NULL-pointer checks and avoids segmentation faults when using libepoxy
under X11, when the server does not have the GLX extension, or it is
disabled -- and applications can still use EGL.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we use the cross-compiler to build syslinux with a recent binutils
version, it fails with:
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld -Bsymbolic -pie -E --hash-style=gnu -T
/builds/arnout/buildroot/output/build/syslinux-6.03/core/i386/syslinux.ld -M -o ldlinux.elf ldlinux.o \
--start-group libcom32.a --whole-archive /builds/arnout/buildroot/output/build/syslinux-6.03/bios/com32/lib/libcom32core.a libldlinux.a --end-group -N
--no-omagic \
> ldlinux.map
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld: ldlinux.elf: Not enough room for program headers, try linking with -N
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld: final link failed: Bad value
/builds/arnout/buildroot/output/build/syslinux-6.03/core/Makefile:167: recipe for target 'ldlinux.elf' failed
Backport an upstream patch that reorganises the i386 bios build by
removing some symbols and making others hidden. To simplify the
backport, an additional patch that also touches the link script is
also included - it anyway looks like that patch could be relevant as
well.
Partially fixes: https://gitlab.com/arnout/buildroot/-/jobs/28979377
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also the last two are regenerated, their context has changed due to
the patches that have been removed earlier.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of libspatialindex on the Microblaze
architecture by working around a gcc bug, by passing -O0 as the
optimization level.
A patch to configure.ac is needed to not have -O2 be forced by the
libspatialindex build system, and therefore AUTORECONF=YES is now
needed.
Fixes:
http://autobuild.buildroot.net/results/bbba2a2c97dbec21340c7fd07162a316a411cba4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In case we're using an initrd, we create an empty "root" directory that
will contain only the bootloader stuff, not the actual root filesystem,
because it is in an initrd (standalone or initramfs).
We have to ensure that the directory is empty before assembling the
filesystem (to avoid any file lingering from a previous run, like the
sequence "make; make"). So we first remove it before we create it, so
that on each build (especially not-from-scratch builds) we get the exact
expected content without any leftover.
However, the macro responsible for that, although defined since 7080eef9,
was never called.
Fix that by registering it as a pre-gen hook.
Note: the directory need not be created, as there are quite a few
"install -D" commands that ensure it is created. Yet, we prefer to
create it explicitly to avoid any confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Although the issue can very well occur with low-paralle builds, or even
with non-parallel builds, the conditions are so strict that the ocasion
it breaks is extremely rare, to the point where a failure would go
unnoticed.
Fixes#10141.
Reported-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
elf2flt contains a program called ld-elf2flt, which gets installed as
a replacement for ld, with ld renamed to ld.real. This program
therefore calls ld.real internally.
The logic to find ld.real worked fine for:
- bin/TARGET_ALIAS-ld
- TARGET_ALIAS/bin/ld
However, it failed badly if bin/SIMPLER_TARGET_ALIAS-ld is used, as
symlink to bin/TARGET_ALIAS-ld. For example:
$ ./output/host/bin/arm-buildroot-uclinux-uclibcgnueabi-ld
/home/thomas/buildroot/buildroot/output/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: no input files
$ ./output/host/bin/arm-linux-ld
arm-linux-ld (ld-elf2flt): error trying to exec '/home/thomas/buildroot/buildroot/output/host/bin/ld.real': execvp: No such file or directory
$ ./output/host/arm-buildroot-uclinux-uclibcgnueabi/bin/ld
/home/thomas/buildroot/buildroot/output/host/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: no input files
This commit fixes that by adding a patch that adjusts the ld-elf2flt
logic to properly cope with this situation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes serious usability issues (Debian changelog):
* Fixed whois referrals for .com, .net, .jobs, .bz, .cc and .tv,
broken by an ICANN-mandated output change:
https://www.icann.org/resources/pages/rdds-labeling-policy-2017-02-01-en
Use snapshot.debian.org for the .dsc reference, since files tend to
disappear from the official Debian ftp site over time.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Recent glibc have deprecated the implicit include of sys/sysmacros.h
from sys/types.h. That means that the macros major and minor are no
longer defined unless this header is included.
This problem was observed for host-e2fsprogs when building on a host
with recent glibc.
Add an upstream patch that includes sys/sysmacros.h when needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Dagg Stompler <daggs@gmx.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.
For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
- add upstream references for the Linux kernel patches
- fix typoes in readme.txt
- remove audio-related packages in defconfig
- regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The DEVELOPERS file lists file patterns, but the get-developers script
only supports getting packages and CPU architectures. Some files are
neither of those, e.g. defconfigs, support files, package infras, ...
Add a '-f' option that allows to give a list of files for which to get
the developer(s).
Note that the DEVELOPERS file contains directories as well as files,
and the directories are not expanded into individual files. Therefore,
we have to use f.startswith(devfile) to match a directory. This assumes
that the directory name ends with /, otherwise 'package/python' would
also match 'package/python-foo'. Since we make sure that directories do
end with / in the DEVELOPERS file, and since false positives are not
much of an issue in this case, this isn't a problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unbreak failing defconfig.
Resulting kernel and rootfs booted on ci20 device.
While at it, drop the useless BR2_TARGET_UBOOT_VERSION variable, this
variable is a hidden variable, so it is useless to mention it in a
defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: drop BR2_TARGET_UBOOT_VERSION.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to the sysvinit package that fixes various
build issues against musl due to missing header includes.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest version of sysdig introduced a variable for the kernel module
name. This patch updates that variable into Makefile.in.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-common implies
that it is common to all skeletons, yet it does not apply to
skeleton-custom. It is only common to the skeleton-init-* packages, so
name it the same way.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-sysv is relatively
clear, skeleton-common and skeleton-none are less clear on their
relationship to BR2_INIT_*. So rename skeleton-sysv to conform to a
clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-systemd is
relatively clear, skeleton-common and skeleton-none are less clear on
their relationship to BR2_INIT_*. So rename skeleton-systemd to conform
to clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-none implies no
skeleton at all, not a base skeleton with no init-specific files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This release contains only two real changes to fix two bugs. One is
only relevant for Windows; the other one fixes handling of empty
comment lines.
libconfuse is used by genimage, and we have one defconfig,
linksprite_pcduino, that has empty comment lines in its genimage.cfg.
Thus, it fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/27873642
While we're at it, also change the upstream URL in Config.in to github.
The old URL on nongnu was just a download directory and didn't have
anything newer than 2010, while github has a nice README.md.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Host variant is needed to generate long description
for python-automat package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install the libraries to staging to be usable by other packages.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds libb64, a library of ANSI C routines for fast
encoding/decoding data into and from a base64-encoded format.
The package contains a static library, headers, and an executable.
The latter, however, requires C++ and offers no advantages over busybox
or coreutils base64, so it is not installed. Therefore, nothing is
installed to target.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout:
- properly wrap Config.in
- move from Crypto to Other menu
- don't install to target
- don't make headers executable
- don't add -D to install with multiple source files
- extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit c69088b8c3, which is
no longer needed now that alsa-lib has been fixed properly.
Indeed, this commit was made because alsa-utils failed to build with:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_htimestamp':
pcm_dmix.c:(.text+0x5c0): warning:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data.rel+0x4): undefined reference to `_snd_module_rawmidi_virt'
collect2: error: ld returned 1 exit status
Which is exactly the problem that we fixed in alsa-lib by making sure
that rawmidi_symbols.c doesn't reference symbols from rawmidi_virt.c
when SEQ support is not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a patch to alsa-lib that fixes an incorrect code
dependency: some code built when MIDI support is enabled is
unconditionally referencing code that is built when SEQ support is
enabled, both options being independent.
This causes build failures such as:
/home/buildroot/buildroot-test/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_sync_ptr':
pcm_dmix.c:(.text+0x83c): warning:
/home/buildroot/buildroot-test/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data+0x4): undefined reference to `_snd_module_rawmidi_virt'
Fixes:
http://autobuild.buildroot.net/results/5964e7028c31a8f75b38a27270410f0b3c5c8422/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add upstream link to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The beaglebone_qt5_defconfig uses an older kernel version which does not
provide a device tree for the beagle bone green.
post-image.sh now selects genimage_linux41.cfg if am335x-bonegreen.dtb is
not build and genimage.cfg otherwise.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump to 7.55.0, libcurl fails to build on a number of
uncommon architectures (ARC, OpenRISC, etc.). This is due to upstream
commit 73a2fcea0b4adea6ba342cd7ed1149782c214ae3 ("includes: remove
curl/curlbuild.h and curl/curlrules.h"), which makes libcurl rely on
more architecture-specific related defines in include/curl/system.h.
This commit therefore adds a patch that fixes the 32-bit vs. 64-bit
detection for all architecture, using gcc's __SIZEOF_LONG__
definition. It has been tested successfully with test-pkg on all 47
toolchain configurations.
Fixes:
http://autobuild.buildroot.net/results/bf26c08cf3267214278674472f931603f69951ae/
(and many similar issues)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cleanup the libcgi package,
by using https://github.com/rafaelsteil/libcgi as an upstream.
Remove old patch and use cmake to build new version.
Signed-off-by: Joe Lin <xlcwu.taiwan@gmail.com>
[Mario:
- Use github URL in Config.in
- Use upstream sha256 hash]
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
[Arnout:
- Add reference to upstream hash file
- Remove unneeded LIBCGI_SUPPORTS_IN_SOURCE_BUILD = NO]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps to mono 5.0.1.1 and updates the unit tests patch
accordingly.
The latest version of mono carries a bit of changes in the monolite
package: the version string changes and from now on, monolite should
be installed in a subdirectory with the exact version string as a name.
Therefore, mono and monolite are bumped in a single commit.
Patch 0004, although applied in upstream master, is not yet in this
(stable) release.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout: squashed the patches, removed /usr part from HOST_DIR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The linux 4.1 kernel does not compile with gcc 6.x.
The compiler version is now fixed to 5.x until a new kernel is used.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the comment that "valgrind needs shared libs" is not hidden
when the architecture dependencies are not met, which can confuse some
users (as recently seen on IRC).
Fix that by introducing the traditional _ARCH_SUPPORTS option, and have
the comment and the symbol depend on that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Brandon Maier <brandon.maier@rockwellcollins.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed--by: Pedro Ribeiro <pedrib@gmail.com>
Tested-by: Pedro Ribeiro <pedrib@gmail.com>
[Arnout: put _ARCH_SUPPORTS at the top of the file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
glob: do not parse after a strtoul() overflow range (CVE-2017-1000101)
tftp: reject file name lengths that don't fit (CVE-2017-1000100)
file: output the correct buffer to the user (CVE-2017-1000099)
Switch to .tar.xz to save bandwidth.
Add reference to tarball signature.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with 4.12-rc1, tarballs are generated by cgit directly from
Linus's tree. This also implies that no .tar.xz can be used for them.
This method also applies to older release candidates.
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
[Arnout: added comment in the code]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When Lua is linked with additional libraries, these libraries should go
into the pkg-config file as well.
Otherwise, linking swupdate with the lua library fails:
```
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlopen'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlclose'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlerror'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlsym'
```
Fixes http://autobuild.buildroot.net/results/1c3/1c349cc5904868e4def292b9fbfa164828e46156
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This solves build failures caused by WebKit trying to include X11 headers
when support for X11 is disabled in Mesa3D. A common situation is when
configuring both GTK+ and WebKitGTK+ only with Wayland support.
Once the fix for https://bugs.webkit.org/show_bug.cgi?id=175125 makes it
into a release, the patch can be dropped.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds a patch to gdb 7.12 and gdb 8.x, which fixes the build on
noMMU platforms. It is not needed for older versions of gdb, since
it's related to the switch of gdb to C++ in the 7.12 release.
Fixes:
../nat/linux-ptrace.c: In function 'int linux_fork_to_function(gdb_byte*, int (*)(void*))':
../nat/linux-ptrace.c:273:29: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
child_stack = xmalloc (STACK_SIZE * 4);
The patch has already been merged upstream, as of commit
ffce45d2243e5f52f411e314fc4e1a69f431a81f, and will therefore be part
of future gdb releases.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
/tmp/output/build/glibc-2.25/build/libc_pic.a(dl-error.os): In function `__GI__dl_signal_error':
dl-error.c:(.text+0x0): multiple definition of `_dl_signal_error'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x134d8): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(dl-error.os): In function `__GI__dl_catch_error':
dl-error.c:(.text+0x190): multiple definition of `_dl_catch_error'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x136fc): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(init-first.os):(.data+0x0): multiple definition of `__libc_multiple_libcs'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.bss+0x6c): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(_itoa.os): In function `_itoa':
_itoa.c:(.text+0xd4): multiple definition of `_itoa'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x133c8): first defined here
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a parameter to run-tests to act as a multiplier for all timeouts of
emulator.
It can be used to avoid sporadic failures on slow host machines as well
in elastic runners on the cloud.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: rename multiplier to timeout_multiplier everywhere]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed 0003-Use-gnu-11-standard-to-prevent-errors-on-PPC.patch, since
stella now uses -std=c++14 that builds fine when using PPC altivec
vectorization.
Removed 0004-gcc7.patch, backported from upstream.
Update toolchain dependencies to gcc 4.9 since codebase now uses C++14 features.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Arnout: also remove 0004-gcc7.patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switched to github helper because upstream does not provide the tarball
anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
By default, mksquashfs uses all the CPUs available, like us with
BR2_JLEVEL=0.
However, by setting BR21_JLEVEL to non-zero, a user volutarily limits
the number of jobbs allowed to run concurrently (for various reasons,
like this is not a priority task on the machine; or like the
autobuilders, to spread the load accross multiple runs without
overloading the machine).
So, propagate tthe parallelisn settings down to mksquashfs, to repect
the user's will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Tested-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc 7 with -Os (optimize for size) takes the liberty to remove the code
of inline functions entirely - which is indeed allowed according to the
C99 standard, cfr. this [1] very complete StackOverflow answer. This
leads to undefined function references at link time.
The proper approach is to patch the code to use 'static inline'
instead. However, for various reasons such a patch is not entirely
trivial, and upstream has not moved since 7 years, so instead take the
simpler approach of restoring the gcc original inline behaviour with
-fgnu89-inline to fix this issue.
Fixes http://autobuild.buildroot.org/results/d72/d72a7e9775a10bc884b9953dd2eba3ad32100cca
[1] https://stackoverflow.com/questions/6312597/is-inline-without-static-or-extern-ever-useful-in-c99
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This partially reverts commit cf6d321e9d.
The underlying reason for doing the checks is to ensure that a
merged-usr setting is properly enforced, even for custom skeletons.
Before that patch, a custom skeleton where both /bin and /usr/bin were
missing was accepted; but then the first package that intalled something
in /bin would create it as a directory, thus breaking the merged-usr
situation. Ditto sbin and lib, of course.
cf6d321 was created to detect that situation, and the fix was to require
that both directories do exist in the custom skeleton, so that we new
the check for consistency were OK, in all cases.
However, that broke existing skeletons which where missing both
directories, and some people are shinning about it...
The crux of the problem is that Buildroot should be responsible for
creating the directories or the symliks when they are missing, and only
fail if the existing ones are incorrect, but not impose the burden on
the user.
A situation where the problem arises is when a skeleton is shared
between various builds, some using a merged-usr while other do not.
We fix that by reverting the offending changes change, back to the
previous behaviour. We keep the stderr redirection in stat calls, and
the variable renaming.
A proper fix to create the missing directories can be added later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gdb 7.12+ is compiled and linked with C++, therefore the thread_db
headers need to use extern "C", to be usable for C++ code.
Fixes:
Issue when building gdbserver for m68k-coldfire:
thread-db.o: In function `thread_db_init()':
thread-db.c:(.text+0x5b6): undefined reference to `td_ta_new(ps_prochandle*, td_thragent**)'
thread-db.c:(.text+0x61e): undefined reference to `td_thr_get_info(td_thrhandle const*, td_thrinfo*)'
thread-db.c:(.text+0x632): undefined reference to `td_symbol_list()'
...
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This change is fixing the bug reported in [1].
Cmake may run pkg-config to find the dependencies when configuring a
package. Because of the value of PATH, and it will use the Buildroot's
pkg-config wrapper, which, by default, is configured (via some
environment variables) to find the target dependencies.
When configuring a host package using cmake, to prevent cmake from
wrongly solving dependencies from the target tree (when the
*-config.cmake files are using pkg-config) instead of looking for them
in the Buildroot's host tree or in the host system itself, we need to
set the environment variables altering the pkg-config behavior in the
cmake configure environment.
So, this change is fixing the cmake host-packages configuration step,
by properly setting the pkg-config environment variables to their values
for finding host dependencies.
Before this patch:
make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
[...]
>>> host-mariadb 10.1.25 Configuring
(mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib"
-DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DWITH_SSL=bundled )
-- Running cmake version 3.8.2
[...]
-- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
[...]
-- Found LibXml2: /opt/br/abo/cmake-host-find-root-path/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libxml2.so (found version "2.9.4")
[...]
0
After this patch is applied:
make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
[...]
>>> host-mariadb 10.1.25 Configuring
(mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" PKG_CONFIG="/opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_LIBDIR="/opt/br/abo/cmake-host-find-root-path/host/lib/pkgconfig:/opt/br/abo/cmake-host-find-root-path/host/share/pkgconfig" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-roo
t-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib" -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DWITH_SSL=bundled )
-- Running cmake version 3.8.2
[...]
-- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
[...]
-- Found LibXml2: /usr/lib/libxml2.so (found version "2.9.4")
[...]
0
[1] http://lists.busybox.net/pipermail/buildroot/2017-August/199776.html
Reported-by: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 0e2ee0e6e8 (package.snappy: fix static builds with threads)
added LIBS=-pthread to configure options to fix static build with
threads on some architectures. This works for autotools packages. Then,
commit d26282b3aa (package/snappy: bump version, switch to cmake)
switched to cmake that does not understand the 'LIBS' parameter.
As pointed out by Thomas[1] the special handling of libpthread for
static builds is not needed anymore: it was needed only to build the
tests, and these are no longer built. Note that packages that link
statically with snappy will still need to link with -pthread. Only
two in-tree packages currently depend on snappy: lua-csnappy depends
on !BR2_STATIC_LIBS and leveldb adds -pthread from its build system.
Tested with the following musl & uclibc defconfigs which also fix build
errors:
http://autobuild.buildroot.net/results/39f/39f9fc4300ddca19e8a533765b46838003752000/http://autobuild.buildroot.net/results/886/8860b9259f7a3aecb2ddbfa787be048072bd347b/
[1] http://lists.busybox.net/pipermail/buildroot/2017-July/199549.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Baruch: improved commit message]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: improved commit message more, based on Yann's input]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes the following build issues:
In file included from ../sysdeps/x86_64/multiarch/varshift.c:19:0,
from ../sysdeps/i386/i686/multiarch/varshift.c:1:
../sysdeps/x86_64/multiarch/varshift.h: In function '__m128i_shift_right':
../sysdeps/x86_64/multiarch/varshift.h:26:1: error: SSE vector return without SSE enabled changes the ABI [-Werror=psabi]
{
[...]
.../lib/gcc/i686-buildroot-linux-gnu/7.1.0/include/tmmintrin.h:136:1: error: inlining failed in call to always_inline '_mm_shuffle_epi8': target specific option mismatch
The patch has been taken from glibc's patchwork at
https://patchwork.sourceware.org/patch/21003/.
Fixes bug #10156.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Versions older than Linux v3.7 do not support the aarch64 architecture
so disable them, for reference see https://kernelnewbies.org/Linux_3.7
Without this patch these defconfigs fail to build
BR2_aarch64=y
BR2_KERNEL_HEADERS_3_2=y
BR2_aarch64=y
BR2_KERNEL_HEADERS_3_4=y
with error messages like this:
make[1]: Entering directory '/home/buildroot/br5_next/output/build/linux-headers-3.2.89'
Makefile:567: /home/buildroot/br5_next/output/build/linux-headers-3.2.89/arch/arm64/Makefile: No such file or directory
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes '__multi3' issue when building the kernel.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With binutils 2.29 a runtime error is seen:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
Backport upstream patch to fix the issue.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We don't add a full stop at the end of the prompt text.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes [1]:
make[1]: Entering directory '.../build/qt5base-5.9.1/examples/opengl'
cd hellowindow/ && ( test -e Makefile || .../build/qt5base-5.9.1/bin/qmake -o Makefile .../build/qt5base-5.9.1/examples/opengl/hellowindow/hellowindow.pro ) && make -f Makefile
make[2]: Entering directory '.../build/qt5base-5.9.1/examples/opengl/hellowindow'
.../host/bin/sparc-linux-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=.../host/sparc-buildroot-linux-uclibc/sysroot -O2 -O3 -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I../../../include/QtGui/5.9.1 -I../../../include/QtGui/5.9.1/QtGui -I../../../include -I../../../include/QtGui -I../../../include/QtCore/5.9.1 -I../../../include/QtCore/5.9.1/QtCore -I../../../include/QtCore -I.moc -I../../../mkspecs/devices/linux-buildroot-g++ -o .obj/hellowindow.o hellowindow.cpp
In file included from hellowindow.cpp:51:0:
hellowindow.h:96:5: error: ‘QOpenGLShaderProgram’ does not name a type
QOpenGLShaderProgram *m_program;
^~~~~~~~~~~~~~~~~~~~
hellowindow.h:97:5: error: ‘QOpenGLBuffer’ does not name a type
QOpenGLBuffer m_vbo;
^~~~~~~~~~~~~
hellowindow.cpp: In constructor ‘Renderer::Renderer(const QSurfaceFormat&, Renderer*, QScreen*)’:
hellowindow.cpp:62:40: error: invalid use of incomplete type ‘class QOpenGLContext’
m_context = new QOpenGLContext(this);
^
In file included from ../../../include/QtGui/qsurfaceformat.h:1:0,
from ../../../include/QtGui/../../src/gui/kernel/qsurface.h:45,
from ../../../include/QtGui/qsurface.h:1,
from ../../../include/QtGui/../../src/gui/kernel/qwindow.h:51,
from ../../../include/QtGui/qwindow.h:1,
from ../../../include/QtGui/QWindow:1,
from hellowindow.h:51,
from hellowindow.cpp:51:
[1] http://autobuild.buildroot.net/results/001/001bc930014fca8c2a8b7a390350b4e1a15fa375/build-end.log
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version is compatible with LibreSSL.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following build failure, which occurs on all architectures:
/tmp/cc6APNmN.s: Assembler messages:
/tmp/cc6APNmN.s: Error: `loc1@GLIBC_2.17' can't be versioned to common symbol 'loc1'
/tmp/cc6APNmN.s: Error: `loc2@GLIBC_2.17' can't be versioned to common symbol 'loc2'
/tmp/cc6APNmN.s: Error: `locs@GLIBC_2.17' can't be versioned to common symbol 'locs'
../o-iterator.mk:9: recipe for target '/tmp/output/build/glibc-2.25/build/misc/regexp.os' failed
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
After c0ad6ded01 expat: security bump to version 2.2.1
the system can hang on startup under certain circumstances.
This happens when:
* we use systemd as init system
* the random nonblocking pool takes a while to initialize
* this apparently doesn't happen on qemu, so this would not have
been caught by the runtime testing infrastructure
* it also doesn't seem to happen when network booting
For a more detailed description of the bug see here:
https://bugs.freedesktop.org/show_bug.cgi?id=101858
The patch should be in next dbus version 1.10.24
Set DBUS_AUTORECONF = YES because configure.ac is changed.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
[Arnout: add upstream commit sha + Marcus's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The azmq library provides Boost Asio style bindings for ZeroMQ. This
library is built on top of ZeroMQ's standard C interface and is intended
to work well with C++ applications which use the Boost libraries in
general, and Asio in particular.
Signed-off-by: RJ Ascani <rj.ascani@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Using the package instrumentation hooks, a file packages-file-list.txt is
created containing the list of files installed by a package with their size.
Due to the use of 'find -type f', symbolic links to files are not included
in this file list. Since the original purpose of this file was to calculate
the total size of a package and symbolic links have file size 0, this was
not a problem.
However, if packages-file-list.txt is reused for other purposes, for example
to get a complete list of files installed by a package regardless of size,
symbolic links to files are important too.
Likewise, to get a complete view of what a package installs, directories
should be included too.
Update the instrumentation hook accordingly.
Although for files an md5sum is taken, we cannot do this for directories.
Instead, mimic the output of md5sum with a fake hash string.
Note: for directories that are used by several packages, e.g. /etc/init.d/,
the package that created the directory will be treated as the 'owner' of
that directory. This gives a somewhat distorted view of ownership.
Similarly, the package size reported by 'make graph-size' (based on
packages-file-list.txt) will include the 'size' of a directory for that
owner, which is reported as e.g. 4096 bytes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Before and after the building of each package, the instrumentation hooks are
run. One of these hooks obtains the list of files installed by a package.
The code to obtain this list is currently duplicated in the start and end
part of the hook. While the amount of duplication is currently small, a
subsequent patch will make more changes to this code, increasing the
duplication.
Therefore, split off into a helper function.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
QtWayland is a Qt 5 module that wraps the functionality of Wayland.
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Brent Sink <brents_3@hotmail.com>
Cc: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
[Arnout:
- select wayland instead of depending on it;
- propagate jscore dependency from qt5declarative
- re-order select/depends statements
- rewrite comment to only refer to GL backend (jscore is an arch
dependency)
- rewrap help text of BR2_PACKAGE_QT5WAYLAND_COMPOSITOR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For the autoconf-based build system it was necessary to allow each
supported architecture separatly:
https://github.com/xbmc/xbmc/blob/Krypton/m4/xbmc_arch.m4
For the CMake build system this is not necessary anymore so we only
blacklist archs in Config.in known to be broken.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: slightly tweak the BR2_PACKAGE_KODI_ARCH_SUPPORTS definition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Removed the following patches due to being merged upstream:
- resolved-bugfix-of-null-pointer-p-question-dereferencing.patch
- resolved-simplify-alloc-size-calculation.patch
- resolved-do-not-allocate-packets-with-minimum-size.patch
- Updated the following patches to work with 234:
- fix-getty-unit.patch
- build-check-for-ln-relative.patch
- fix-am-path-libgcrypt-no-found.patch
- Updated ordering of remaining patches.
- Reformatted remaining patches as git style patches.
- Updated Upstream-Status comment in "build-check-for-ln-relative.patch" to
"Denied [No desire to support building on old distributions]"
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Marcus Hoffmann <m.hoffmann@caretelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Section sorting code in xtensa ld was incorrectly cleaned up in release
2.29, resulting in the following assertion when --sort-section,alignment
option is used:
BFD (GNU Binutils) 2.29 assertion fail elf32-xtensa.c:3965
Backport the fix that restores original section sorting.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some xtensa configurations there may be system/user registers in
xtensa-modules with negative index. ISA initialization for such config
may clobber heap and result in program termination.
Don't update lookup table entries for register with negative indices.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This host-only package was used to enable graphite support in GCC 4.9,
but Buildroot no longer supports Graphite optimizations in GCC 4.9
(only GCC >= 5.x is supported). Therefore, we can remove the cloog
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we no longer support Graphite optimizations in gcc 4.9 (which
required ISL 0.14.1), we can bump ISL to a newer version, which allows
to support Graphite optimizations in GCC >= 5.x.
The comment about the version being limited to 0.14.1 because of cloog
is no longer relevant, so it is removed.
Our libtool patch now applies properly, so we can remove
ISL_LIBTOOL_PATCH = NO.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas:
- remove ISL_LIBTOOL_PATCH = NO
- improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC 4.9.x requires an old version of ISL to support graphite, and this
old version of ISL is not sufficient to support graphite in modern GCC
versions.
Since GCC 4.9.x is getting older, and to keep things simple, we stop
supporting graphite on old GCC < 5.x. This way, we will be able to
bump ISL to a version that is suitable for modern GCC versions.
In addition, this allows to drop the dependency on cloog, which was
only needed for GCC 4.9.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We add the 3 following combinations:
- basic systemd, read-only, network w/ ifupdown
- basic systemd, read-only, network w/ networkd
- full systemd, read-only, network w/ networkd
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the rootfs is readonly, systemd will expect /var to be writable.
Because we do not really have a R/W filesystem to mount on /var, we make
it a tmpfs [*], and use the systemd-tmpfiles feature to populate it with
"factory" defaults.
We obtain those factory defaults by redirecting /var to that location at
build time, using a symlink /var -> /usr/share/factory which is the
location in which systemd-tmpfiles will look for when instructed to
"recursively copy" a directory.
With a line like:
C /var/something - - - -
it will look for /usr/share/factory/something and copy it (recursively
if it is a directory) to /var/something, but only if it does not already
exist there.
We also mark this copy with the exclamation mark, as it is only safe to
copy on boot, not when changing targets.
To be noted: the real format for such lines are:
C /var/something - - - - /from/where/to/copy/something
But if the source is not given, then it is implicitly taken from
/usr/share/factory (which in our case is as-good a location as whatever
else, so we use it, and thus we need not specify the source of the
copy).
Note that we treat symlinks a little bit specially, by creating symlinks
to the factory defaults rather than copying them.
Finally, /var at build time is a symlink, but at runtime, it must be a
directory (so we can mount the tmpfs over there). We can't change that
as a target-finalize hook, because:
- some packages may want to set ownership and/or access rights on
files or directories in /var, and that only happens while assembling
the filesystem images; changing /var from a symlink to a (then
empty) directory would break this;
- /var would be a directory on sub-sequent builds (until the next
"make clean").
Instead, we use the newly-introduce pre- and post-rootfs command hooks,
to turn /var into a directory before assembling the image, and back to a
symlink after assembling the image.
[*] People who want the factory-defaults only on first boot will have
to tweak the fstab to mount something else than a tmpfs on /var.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, the directory structure we want in the filesystem is not
exactly what we have in target/
For example, when systemd is used on a read-only rootfs, /var must be a
tmpfs. However, we may have packages that install stuff in there, and
set important rights (via the permission-table). So, at build time, we
need /var to be a symlink to the remanent location (/usr/share/factory)
while at runtime we need /var to be a directory.
One option would have been to have /var as a real directory even during
build time, and in a target-finalize hook, move everything out of there
and into the "factory" location. However, that's not possible because
it's too early: some packages may want to set ownership and/or acces
rights on directories or files in /var, and this is only done in the
fakeroot script, which is called only later during the assembling of the
filesystem images.
Also, there would have been no way to undo the tweak (i.e. we need to
restore the /var symlink so that subsequent builds continue to work) if
it were done as a target-finalize hook.
The only solution is to allow packages to register pre- and post-hooks
that are called right before and right after the rootfs commands are
executed, and inside in the fakeroot script.
We can however not re-use the BR2_ROOTFS_POST_FAKEROOT_SCRIPT feature
either because it is done before the filesystem command, but there is
nothing that is done after. Also, we don't want to add to, and modify a
user-supplied variable.
So, we introduce two new variables that packages can set to add the
commands they need to run to tweak the filesystem right at the last
moment.
Those hooks are not documented on-purpose; they are probably going to
only ever be used by systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For systemd, we create a simple /etc/fstab with only an entry for /, as
systemd otherwise automatically mounts what it needs where it needs it.
systemd does not like that the content of /var be symlinks to /tmp,
especially journald that starts before /tmp is mounted, and thus the
journal files are hidden from view, which causes quite a bit of fuss...
Instead, move the current /var to a sysv-only skeleton.
systemd at install time will create the /var content it needs, so we
just create an empty /var for systemd.
systemd would create /home and /srv at runtime if they are missing, but
it is better to create them right now, to simplify supporting systemd on
a RO filesystem in the (near) future.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we use the same skeleton for sysv-like init systems and
systemd, even though systemd has some peculiarities that makes our
default skeleton unfit.
So, we'll need to provide different skeletons (really, only part of
it) for sysv-like and systemd. In addition, in order to support the
"no init system" (BR2_INIT_NONE) use case, we introduce a "none"
skeleton.
Introduce three new skeleton packages, aptly named skeleton-sysv,
skeleton-systemd and skeleton-none. All three are providers of the
skeleton virtual package, in lieu of the skeleton-common package,
which is now a simple dependency of all three new skeletons.
Those packages are empty for now. In followup changes:
- sysv-specific stuff will be moved out of skeleton-common and into
skeleton-sysv;
- systemd-specific stuff will be added to skeleton-systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- merge with the patch that enables the BR2_INIT_NONE case
- simplify the BR2_PACKAGE_SKELETON_COMMON_ONLY select logic]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- remove the BR2_PACKAGE_SKELETON_COMMON_ONLY logic, and instead
introduce a separate skeleton-none package for the BR2_INIT_NONE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't really care what's going in staging, as long as it is properly
setup for merged/non-merged /usr, especially for the lib/ directory.
So we can just copy the skeleton as-is.
This simplifies maintenance, should we ever need to tweak the layout:
we'd just have to do it once in the skeleton directory to have it
propagated to both target and staging.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have two packages that can act as a skeleton, skeleton-common,
also known as our default skeleton, and skeleton-custom.
This means that the skeleton package can be a standard virtual package
now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package variables should always be prefixed with the package name. For
SKELETON_COMMON_ROOT_PASSWORD, this means we set the variable a second
time based on the value it previously had. Fortunately, this is fine
for make, even for recursively expanded variables.
This also allows to simplify the condition of the empty password - it's
not needed to set it again to empty if it already was empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all the handling of the default skeleton into a new package,
skeleton-common.
We don't name it skeleton-default, because it will be further split
later, into a skeleton for sysv and another for systemd, with some parts
still common between the two. So just name it skeleton-common right now;
this will save us a rename later.
While we're at it, also assign to SKELETON_COMMON_TARGET_FINALIZE_HOOKS
instead of directly to the global FINALIZE_HOOKS. Therefore, we don't
need to do all of that in a condition BR2_PACKAGE_SKELETON_COMMON==y.
Note: it would be technically sound to move the skeleton files together
within a sub-directory of the skeleton-common package. However, we refer
the user to those files, from various locations (manual, packages). It
will indeed be easier for the user to find those files in
system/skeleton/ rather than in package/skeleton-common/skeleton/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: remove the mkdir $(STAGING_DIR)/usr/include which was removed
in skeleton.mk in master.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For target install, we don't need to check the merged-usr symlinks
any more, it was already checked before.
For staging, instead of creating directories, just copy the same
skeleton, which was already checked to be correct.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to checking the symlinks in the merged usr case, also check
whether /bin, /lib, /sbin and their /usr/... counterparts exist in the
non-merged case.
Missing directories are collected in the variable
SKELETON_CUSTOM_MISSING_DIRS. For symmetry and because it's more
logical, rename SKELETON_CUSTOM_NOT_MERGED_USR to
SKELETON_CUSTOM_NOT_MERGED_USR_DIRS.
When a directory is indeed missing, "stat" will print an error.
Buildroot *also* prints an error, which is clearer. So remove the error
from stat by redirecting it to /dev/null.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
skeleton-custom.mk contains a huge condition for BR_BUILDING and for
BR2_ROOTFS_MERGED_USR. This makes the code difficult to follow, so
rework the condition a bit so that only the parts that really need to
be conditional are indeed conditional.
Note that there is no overhead in needlessly evaluation the "stat"
commands. Indeed, the assignments use late evaluation so the "stat"
is only executed when evaluating the condition - when skeleton-custom
is not selected, stat is never called.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the custom skeleton, we practicaly do nothing, except ensure it
contains the basic, required directories, and that those are properly
setup wrt. merged /usr.
Furthermore, our current skeleton is not fit for systemd, and we'll
have to split things out into various skeletons.
So, off-load the custom skeleton into its own package.
Thus, the existing skeleton package is now limited to:
- when using our default skeleton, install and tweak it properly;
- when using a custom skeleton, do nothing except for depending on
the skeleton-custom package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch doing only this]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "builtin" kernel does not boot a systemd-based system, so
we resort to building the same one as currently used by our
qemu_arm_vexpress_defconfig.
We test the 8 following combinations:
- busybox, read-only, without network
- busybox, read-only, with network
- busybox, read-write, without network
- busybox, read-write, with network
- basic systemd, read-write, network w/ ifupdown
- basic systemd, read-write, network w/ networkd
- full systemd, read-write, network w/ networkd
- no init system, read-only, without network
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
samba4 picks up dbus as dependency if it was built before:
Checking for dbus : yes
Checking for header dbus/dbus.h : yes
Checking for library dbus-1 : yes
There is no configure option to control dbus support so we just make
sure dbus is built before samba4 to have reproducible builds.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch allows building samba4 with uClibc again after rpc support
was removed from uClibc. Building with musl is still broken:
The first error
../nsswitch/wins.c: In function ‘_nss_wins_gethostbyname_r’:
../nsswitch/wins.c:272:15: error: ‘NETDB_INTERNAL’ undeclared (first use in this function)
*h_errnop = NETDB_INTERNAL;
^~~~~~~~~~~~~~
../nsswitch/wins.c:272:15: note: each undeclared identifier is reported only once for each function it appears in
../nsswitch/wins.c:349:14: error: ‘NETDB_SUCCESS’ undeclared (first use in this function)
*h_errnop = NETDB_SUCCESS;
^~~~~~~~~~~~~
could be solved by applying
https://git.alpinelinux.org/cgit/aports/tree/main/samba/netdb-defines.patch
but then the build fails at
../ctdb/tests/src/test_mutex_raw.c: In function ‘main’:
../ctdb/tests/src/test_mutex_raw.c:170:28: error: ‘pthread_mutex_t {aka struct <anonymous>}’ has no member named ‘__data’
printf("pid=%u\n", mutex->__data.__owner);
^~
Therefore we disable musl support until a fix can be found.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- instead of setting SAMBA4_CONF_ENV within the libtirpc condition,
introduce SAMBA4_CFLAGS and SAMBA4_LDFLAGS variables and use them
- add missing dependency on host-pkgconf, needed because we call
pkg-config to get the flags from libtirpc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been introduced, and we have moved to
2.28.1 as the default version, it is time to drop support for binutils
2.26.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been released, it is time to move to
binutils 2.28.x as the default binutils version, instead of 2.27.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both our target and host gdb depend on ncurses (host-ncurses for
host-gdb, of course). However, while for the target we passs
--with-curses, we are not doing this for the host variant. Due to
this, host-gdb default to using the termcap library: if such a library
is available on the build system, it will be used instead of the
host-ncurses we have built. This causes the host gdb binary to depend
on a library that we do not provide in $(HOST_DIR), breaking the
principle of a standalone SDK (which should only depend on the C
library).
To solve this, we simply pass --with-curses in HOST_GDB_CONF_OPTS,
which forces host-gdb to use the host-ncurses library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
UTF-8 formatted file breaks installations on some systems:
Traceback (most recent call last):
File "setup.py", line 34, in <module>
long_description=open('README.rst').read() + '\n\n' + open('HISTORY.rst').read(),
File "/home/peko/autobuild/instance-1/output/target/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 1125: ordinal not in range(128)
This patch replaces '§' with 'S' meaning 'Section' and hence converts file to plain ASCII.
Fixes:
http://autobuild.buildroot.net/results/4189b2ddcd3d59c629af78e4d455a29c77f8c683/
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our current skeleton is tailored to sysv-like init systems; it is not
fit for systemd-based systems. So, in upcoming changes, we'll add
another skeleton for systemd.
This means we can no longer have the current skeleton default to 'y', or
it would be enabled also for systemd, which would be incorrect.
So, we remove the default to 'y' but have it selected by the default
skeleton choice.
However, we do not yet have a way to directly build (really, install)
the custom skeleton, it is built (really, installed) as a dependency of
the default skeleton. So we must also forcibly select the default
skeleton when using a custom one.
Until we have the means to do only one or the other; i.e. when we have a
virtual skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setting the root pasword is done in a target-finalize hook, so we do not
need to enforce a dependency from the skeleton onto host-mkpasswd.
Dropping that dependency will simplify making skeleton a virtual
package (in up-coming changes).
Instead, it is now selected as any other package. As such, it is
guaranteed to be built before target-finalize.
This however introduces a slight change in behaviour: previously,
host-mkpasswd would only be built if we needed to hash the root password
from its plain-text value. Now, host-mkpasswd is always built as soon as
the root password is non-empty, even if already pre-hashed.
Since host-mkpasswd is a really tiny weeny package bundled in Buildroot,
with only two C files, built as a single unit with a single gcc call,
the overhead is really minimal. Compared to the simplifications this
will allow in the skeleton packages (plural: common, sysv, systemd,
custom) to come, this overhead is acceptable.
Yet another simplification, even if small, to ease providing multiple
skeletons.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the password generation as a post build step.
This prepares the option to remove the admin panel from
installation.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 0.6, libcodec2 switched buildsystem from autotools to
cmake.
The patches in the libcodec2 directory were removed because they were
only relevant to the autotools build, but another patch was added to
fix the codec2.pc file being installed.
For the cmake package unittests are disabled by default. The download
site is changed to http://files.freedv.org/codec2. An option is added
to be able to install examples to target.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: switch to 0.7, add patch to fix .pc file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches from binutils 2.28 are kept, except patch
0906-microblaze-pr21180.patch, because it has been merged upstream as
of commit bd757ca7bf5886a4025ca02093fca1b8c5ce11a2. Other patches are
slightly adapted to differences that appeared in binutils 2.29.
The patches are now all Git formatted, so instead of having weird
sequence numbers, they have normal sequence numbers starting from 0001
and incrementing.
Since binutils 2.29 is now available as a .tar.xz tarball, we use this
format instead of .bz2 used for previous versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils 2.28.1 is a bug-fix release of the 2.28.x branch, so let's
switch to it.
Since a xz-compressed tarball is available, we use it instead of the
bz2-compressed one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes when a test fails in a gitlab pipeline the reason of the
failure cannot be determined using only the logfile.
Add the modified rootfs as an artifact of the job to improve
troubleshooting. To accomplish this, always use -k option from the test
infra, unconditionally add the resulting images to the artifacts, and
let the runner do the cleanup for us.
These artifacts can also be useful when a test fails locally but pass at
gitlab runners.
When the test does not generate a image, this message is displayed in
the runner log:
WARNING: test-output/*/images/*: no matching files
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream switched to CMake, host-pkgconf is not needed anymore.
Instead of using the latest release 1.1.6 we use current git HEAD
because it contains important patches:
"Support both static and shared library CMake builds."
c756f7f5d9
"Redo CMake configuration", this commit allows to disable building
Snappy's own tests.
be6dc3db83
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
lib in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter l in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter k in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter j in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter i in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter h in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter g in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter f in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter e in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Busybox 1.17.1 has added built-in TLS support. Unfortunately, it fails
to build on i686 with gcc 4.8, with:
networking/tls_pstm_mul_comba.c: In function 'pstm_mul_comba':
networking/tls_pstm_mul_comba.c:82:1: error: 'asm' operand has impossible constraints
asm( \
^
networking/tls_pstm_mul_comba.c:279:4: note: in expansion of macro 'MULADD'
MULADD(*tmpx++, *tmpy--);
^
make[3]: *** [networking/tls_pstm_mul_comba.o] Error 1
make[2]: *** [networking] Error 2
Since TLS support is a new feature in 1.27, and wasn't present until
now, let's disable it to avoid the build failure.
The bug has been reported upstream at
http://lists.busybox.net/pipermail/busybox/2017-July/085713.html.
Fixes:
http://autobuild.buildroot.net/results/d973f9a2fbf0f52104f4943b902183e9dbf163a7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Detecting the boost program_options library is broken:
checking for the Boost program_options library... no
configure: error: cannot find the flags to link with Boost program_options
config.log shows the reason, libatomic is missing:
conftest.o: In function `boost::detail::sp_counted_base::release()':
conftest.cpp:(.text._ZN5boost6detail15sp_counted_base7releaseEv[_ZN5boost6detail15sp_counted_base7releaseEv]+0xc):
undefined reference to `__atomic_fetch_sub_4'
conftest.cpp:(.text._ZN5boost6detail15sp_counted_base7releaseEv[_ZN5boost6detail15sp_counted_base7releaseEv]+0x38):
undefined reference to `__atomic_fetch_sub_4'
/home/buildroot/br4/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libboost_program_options.so:
undefined reference to `__atomic_fetch_add_4'
Please note that using LIBS=-latomic is not enough, although it fixes
the configure check the bug reoccurs when linking cc-tool:
CXXLD cc-tool
src/application/cc_flasher.o: In function `boost::detail::sp_counted_base::weak_release()':
cc_flasher.cpp:(.text._ZN5boost6detail15sp_counted_base12weak_releaseEv[_ZN5boost6detail15sp_counted_base12weak_releaseEv]+0xc):
undefined reference to `__atomic_fetch_sub_4'
We need to add -latomic to CXXFLAGS to both fix configure and linking.
Fixes
http://autobuild.buildroot.net/results/596/596f97364bb2c7598b0646da8160939356f0d2c6/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we have multiple versions for a package, and the licensing terms
depend on the version actually selected (e.g. like Qt5), storing the
hashes for those license files in the .hash file is broken: the infra
will ensure that all hashes for a file do match, which would not be the
case here.
We fix that by first looking for a hash file in the version sub-dir
first, and if that does not exist, then we use the main hash file.
Drop the useless intermediate variable 'ret'.
Update the documentation accordingly.
Reported-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Drop patch 0002-column-fix-compilation-when-libc-lacks-wide-characte.patch
as it has been applied upstream
- Patch 0001-Revert-build-sys-ncurses-headers-cleanup.patch is still
required to fix ncursesw support.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Cc: "Carlos Santos" <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, update busybox-minimal.config and busybox.config by loading the
config files and saving them back.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain configuration used by the autobuilders to test the
internal toolchain backend on ARM contains an option that no longer
exists: BR2_UCLIBC_VERSION_NG. This option has been removed since
uClibc-ng has been made the one and only uClibc version supported.
Due to this option no longer existing, this toolchain configuration
was in fact never used, because the randgenconfig script validates
that a toolchain configuration is valid by checking that all lines are
still present in the final .config.
Therefore, this commit removes the bogus option, which will make sure
this toolchain config gets used again by our autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When testing a package with test-pkg, it may be useful to override the
set of toolchains used. For example:
- to test with toolchains used in your company;
- to test against a subset that is known to be problematic;
- to use only toolchains you already have available locally when you
have no network access.
Add an option to use an alternate CSV file containing the config
fragments of toolchains to try.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apparently the service identify code requires the python attrs
to be availabe:
Traceback (most recent call last):
File "/opt/exablox/bin/configsrv", line 5, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3138, in <module>
@_call_aside
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3124, in _call_aside
f(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3151, in _initialize_master_working_set
working_set = WorkingSet._build_master()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 661, in _build_master
ws.require(__requires__)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 962, in require
needed = self.resolve(parse_requirements(requirements))
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 849, in resolve
raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'attrs' distribution was not found and is required by service-identity
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If building Xen and not using glibc (using musl for example) the QEMU
project inside of Xen fails to build as it relys on the XATTR_SIZE_MAX
macro which is defined in <linux/limits.h>.
Glibc includes this header indirectly but as that is not part of the
POSIX standard other libraries don't neccessearily have this. To fix the
issue we explicitly include <linux/limits.h> to ensure the build works
for all libc libraries.
Fixes:
http://autobuild.buildroot.net/results/bb1/bb1310eb1464d880a357ae5e491fd168361d25a0
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two added patches allow building WebKitGTK+ when the compiler
scpecifically targets ARMv8-A, and reports as such be pre-defining
__ARCH_ARM_8A__ instead of just __ARCH_ARM_8__. Both patches were
pulled from the corresponding upstream bug reports and edited to
remove the conflicting parts which edit the ChangeLog files.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both patches applied upstream.
The release contains mostly bugfixes and a basic sparc64
port. As the sparc64 port only contains support for static
binaries, it will be not enabled in buildroot yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ICU depends on BR2_HOST_GCC_AT_LEAST_4_8 and
BR2_TOOLCHAIN_GCC_AT_LEAST_4_8, these dependencies are propagated to
qt5webkit but were not propagated to qt-webkit-kiosk.
Fixes [1]:
The WebKit build was disabled for the following reasons:
* ICU is required.
[...]
cp -dpf .../host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libQt5WebKit*.so.* .../target/usr/lib
cp: cannot stat `.../host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libQt5WebKit*.so.*': No such file or directory
[1] http://autobuild.buildroot.net/results/2f3/2f381967c82775ad911a246a9607034ef489c1ce
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- rewrap commit message
- fix spelling mistakes in commit message
- reformulate the dependency comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Other changes:
- Refresh 0001-misc.patch to work with 1.0.17.
- Reformat 0001-misc.patch to git style patch.
- Rename 0001-misc.patch to 0001-misc-fixes-from-archlinux.patch.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On Fedora26, openssl 1.1.x is included by default. This causes build
errors when building the host variant of mariadb.
Adding -DWITH_SSL=bundled fixes this issue.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2017-7018 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7030 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7034 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7037 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7039 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7046 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7048 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7055 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7056 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7061 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7064 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
The issue involves the "WebKit" component. It allows attackers to bypass
intended memory-read restrictions via a crafted app.
For more details, see the announcement:
https://webkitgtk.org/2017/07/24/webkitgtk2.16.6-released.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Adrian Perez de Castro" <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've had this mkdir, in various forms, for aeons. It dates back to
the inception of Buildroot, at the dawn of ages, when the toolchain
support was still nascent. Evolution had it morph from /include, to
a tuple-prefixed directory and a symlink there-to, then back to the
/include directory, to the final /usr/include directory we've had
for the last 9 years.
Anything that wants to install headers is supposed to be creating
that directory beforehand; we don't need this legacy mkdir now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since we now request that the user sets the exact size of the ext2/3/4
filesystem, we've had quite a few users wondering what was going on when
they enable too much and the default 60M are no longer enough.
When mkfs.ext2 fails, print a hint that the user should check the size
setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: Add *** and redirect to stderr]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When the ICU package is enabled (BR2_PACKAGE_ICU=y) but ICU support in
cppcms is disabled (BR2_PACKAGE_CPPCMS_ICU is disabled), cppcms still
detects ICU, but it fails to build since we don't get the proper ICU
CXXFLAGS.
In addition, this is not the intended behavior: when
BR2_PACKAGE_CPPCMS_ICU is disabled, we expect cppcms to be built
without ICU support.
To achieve this, we pass -DDISABLE_ICU_LOCALE=ON when
BR2_PACKAGE_CPPCMS_ICU is disabled (yes DISABLE_ICU_LOCALE means the
logic is inverted).
While at it, we pass DISABLE_ICU_LOCALE=OFF when ICU support is
enabled, and not DISABLE_ICONV=ON. The latter has been passed in this
condition since the cppcms package was introduced in Buildroot, but it
doesn't seem to make sense.
Fixes:
http://autobuild.buildroot.net/results/b6a8c7000c5742efc9d8e13507dab86e36b62840/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since we introduced the support for building Busybox as individual
binaries, Busybox started failing to build on SPARC/SPARC64 with this
feature enabled:
appletlib.c:(.text.find_applet_by_name+0x14): relocation truncated to fit: R_SPARC_GOT13 against symbol `applet_nameofs' defined in .rodata.applet_nameofs section in libbb/lib.a(appletlib.o)
appletlib.c:(.text.find_applet_by_name+0x18): relocation truncated to fit: R_SPARC_GOT13 against symbol `applet_names' defined in .rodata.applet_names section in libbb/lib.a(appletlib.o)
[...]
This commit adds two patches to Busybox to fix this issue, by adding
-fPIC to CFLAGS when building on SPARC/SPARC64. The patches have been
submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/90144369ccea8c41ec7643a79a7ebfaa9b7db95c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is used by Kconfig's merge_config.sh.
No alldefpackageconfig is added, since it's rather pointless: it would
only enable busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules for the *config targets are all very similar, so factor them
together using $@.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This column is not used by either genrandconfig or test-pkg, so remove
it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
The --toolchains-url option is renamed to --toolchains-csv.
The paths in the toolchains_csv file should be either absolute, or
relative to buildrootdir.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-csv", kwargs['toolchains_csv']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have a list of toolchain configurations that are used by
the autobuilders at [1]. However, this makes it a little more difficult
for people to use these configurations, and also to have a different
list of configurations for different branches. For example if a new
architecture is introduced, the 2017.02.x branch doesn't have support
for this architecture yet so it shouldn't try to run those configs.
Therefore, include the autobuild config fragments directly in Buildroot,
so they can be branched together with the rest. We create a new
directory under support/ to store them.
Generated with
wget -nd --no-parent --recursive http://autobuild.buildroot.net/toolchains/configs/
The index.html file is removed.
The toolchain-configs.csv file is adapted so the URLs become relative
paths pointing to the config fragments.
[1] http://autobuild.buildroot.net/toolchains/configs/toolchain-configs.csv
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This has a number of side-effects which must be handled.
The lines in minimal.config may be overridden by the random lines added
by amending the configuration, so is_toolchain_usable() shouldn't take
those into account, or indeed the random lines added. Therefore, make
a copy of the config before appending minimal.config and the random
lines. While we're at it, rename the variable to the more appropriate
toolchainconfig.
minimal.config sets BR2_INIT_NONE=y, but we really also want to test
with BR2_INIT_BUSYBOX=y. Therefore, add a random line to use the
busybox init system. We set its probability rather high. The
probabilities of systemd and eudev are increased since they're now
in the else branch of BR2_INIT_BUSYBOX, which halves the probability
that we even get there.
We now also generate configurations without busybox. Previously,
busybox was almost always selected due to BR2_INIT_BUSYBOX=y. Only if
systemd is selected there was a chance to build without busybox.
We now set BR2_SYSTEM_BIN_SH_NONE=y, the other /bin/sh options are
never tested. However, this is not really something that is relevant
to test in the autobuilders.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When outputdir is 'output' (the default), genrandconfig didn't work
correctly because it expects the configfile in outputdir, while
Buildroot puts it in the buildroot directory.
Fix this by explicitly checking if outputdir == buildrootdir/output.
Because abspath is used for both paths, string comparison works
reliably.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path to the .config file is calculated in several places - replace
it with a single calculation, and pass configfile as an argument
to is_toolchain_usable and fixup_config. These functions also don't
need outputdir any more.
This makes it easier to fix the case when configfile is not in
outputdir.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The --instance argument is just an artifact of genrandconfig's
history as part of autobuild-run. It is much more logical to pass
the output directory and the buildroot directory as arguments, with
sane defaults.
This also allows us to remove the hack of creating a symlink in the
instance directory if it doesn't exist yet.
Note that the default outputdir 'output' doesn't work yet, because in
that case Buildroot will put the config file in the buildroot directory
instead of the output directory. This will be fixed in a follow-up
patch.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-url", kwargs['toolchains_url']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output of genrandconfig is currently very terse, which is annoying
for debugging the script or generally seeing what is going on. Also the
timing information added by log_write isn't very useful when the script
is used stand-alone.
In the new setup, (verbose) output goes to stdout and error output goes
to stderr. Also the "INFO: generate the configuration" message is
eliminated - it should go in the autobuild-run script.
We also add an explicit message when a toolchain can't be used after
the first defconfig, otherwise autobuild-run will just silently
restart.
Note that, since the output of make is no longer redirected to
/dev/null, we get one more message on stderr that will be recorded in
the autobuilder's log file: KCONFIG_SEED=0xXXXXXXXX.
This approach allows us to optimise the error handling to use
exceptions, where appropriate, which can be caught at the top level and
converted to an error message to stderr. This, in turn, allows us to use
subprocess.check_call, which eliminates a lot of conditions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SystemInfo class is instantiated globally and passed down to all
functions, but it is really only used in fixup_config. So instead,
instantiate it there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kwargs is a left-over from the use of docopt, it's better to use
argparse's Namespace object directly.
In addition, most functions use just one or two fields of args, so
these can just as well be passed directly as arguments to the function.
Particularly for outputdir it doesn't make sense to reconstruct it all
the time.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warnings fixed:
E731 do not assign a lambda expression, use a def
-> urlopen_closing is defined with a def. urlopen is not used
elsewhere so inlined.
E302 expected 2 blank lines
E501 line too long
-> long lines due to a long string are NOT split
E701 multiple statements on one line (colon)
E722 do not use bare except'
-> use "except Exception", so KeyInterrupt and SystemExit are still
passed. We never intended to catch those.
E741 ambiguous variable name 'l'
-> variable name is replaced with the much more descriptive
toolchains_csv
E271 multiple spaces after keyword
E231 missing whitespace after ','
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Popen is more complicated and more difficult to understand.
check_output raises an exception if the exit code is non-zero, but
that's probably what we want if ldd can't be executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script will be used by the autobuild-run script to generate the
configuration to test. It is put in the utils directory because it can
also be called directly to allow users to test things.
For now, it is a direct copy of the relevant functions from the
autobuild-run script. The only changes are:
- unneeded import statements are removed;
- code/decode wrappers are limited to decode_byte_list;
- __main__ handling is added.
For now, the only supported arguments are the ones needed for
autobuild-run. Follow-up patches will refactor things and also change
the way the script is called. In this version, it can be called from the
autobuild-run script as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-i", str(kwargs['instance']),
"--toolchains-url", kwargs['toolchains_url']],
stdout=log, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RUNDIR installs the test applications and shared libraries into a
different folder then /usr/lib. This is desired as there are a lot of
test apps which would get installed into /usr/lib without
organization. Instead, set RUNDIR=/usr/lib/paxtest to install the test
apps and libraries in a sub folder. The genpaxtest script accounts for
this path and handles a LD_LIBRARY_PATH update as part of the paxtest
script's exeuction.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package to provide Zstandard compression tools
(see https://facebook.github.io/zstd)
Minimal config snippet for utils/test-pkg is as follows:
BR2_PACKAGE_ZSTD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas:
- use "config" instead of "menuconfig" in Config.in
- add missing final newline in Config.in
- pass DESTDIR=$(TARGET_DIR) only at install time
- wrap too long lines in the .mk file
- remove useless empty newline at end of .hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.07 and kernel to version 4.12.3.
As imx_v6_v7_defconfig in 4.12 selects CONFIG_CFG80211_WEXT=y,
remove the linux.fragment file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit de903755d7 (grep: fix build failure for musl) added
--with-included-regex to configure options in musl builds. The commit log
mentions build failure because grep configure doesn't detect the missing libc
regex support. Unfortunately, the commit log adds no details on said build
failure, or any autobuilder reference. The autobuilder didn't record
any grep build failure for version 2.20 that was current at the time.
Build with musl succeeds nowadays, so remove the workaround.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the 'disable' config option in the 'else' clause of the optional
dependency as is the common pattern.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit cf3cd4388a the -j option is
silently ignored.
The configuration lines are processed using '\n'.join().
This function adds intervening occurrences of the separator, but the
resulting string does not end at a separator.
>>> "n".join(["a","b"])
'anb'
It results in a defconfig that does not end in a newline.
When BR2_JLEVEL is added by -j logic to the defconfig it ends up
concatenated to the last line of the defconfig.
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM=yBR2_JLEVEL=7
The resulting .config has the default BR2_JLEVEL=0.
Instead of just workaround this problem by adding a newline before
BR2_JLEVEL when -j is used, make the defconfig to end in a newline since
it is a more future-proof solution.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes security bugs CVE-2017-11103 & CVE-2017-6594
Changed upstream tarball location as noted in the release notes:
http://www.h5l.org/releases.html?show=7.4.0
--with-db-type-preference= is needed to fix a build error:
CCLD otp
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_get_internal':
otp_db.c:(.text+0x32): undefined reference to `__roken_dbm_fetch'
otp_db.c:(.text+0xd9): undefined reference to `__roken_dbm_store'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_db_open':
otp_db.c:(.text+0x1c9): undefined reference to `__roken_dbm_open'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_db_close':
otp_db.c:(.text+0x205): undefined reference to `__roken_dbm_close'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_delete':
otp_db.c:(.text+0x23e): undefined reference to `__roken_dbm_delete'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_put':
otp_db.c:(.text+0x388): undefined reference to `__roken_dbm_store'
collect2: error: ld returned 1 exit status
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have 0001-remove-__FAVOR_BSD.patch in uClibc-ng (which is
upstream and will be part of uClibc-ng 1.0.26), we no longer need the
work-around patch in the ndisc6 package.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable is currently not used by anyone.
The value is changed to match the path to DL_DIR.
The next patch will introduce the use of PKG_DL_DIR for packages that
use specific EXTRACT_CMDS.
And then we will be able to change the value of PKG_DL_DIR to create a
new directory structure in DL_DIR with a subdirectory for each package.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-aespipe fails on Debian stretch at linking stage:
/usr/bin/gcc -L/home/buildroot/br6/output/host/lib -L/home/buildroot/br6/output/host/usr/lib -Wl,-rpath,/home/buildroot/br6/output/host/usr/lib -o aespipe aespipe.o aes-amd64.o md5-amd64.o md5-2x-amd64.o aes-intel64.o sha512.o rmd160.o
/usr/bin/ld: aes-amd64.o: relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
The same problem apparently exists on recent Ubuntu and Gentoo.
Fix is also used in Debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837393
[Peter: add comment explaining why]
[Arnout: use host-cc-option to discover if -no-pie is available;
cfr. 57b628a932]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This macro allows to test if HOSTCC supports a specific option. It is
needed to pass '-no-pie' on recent Debian, Ubuntu and Gentoo hosts.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The big.LITTLE configurations can be optimised for by gcc, and a few
users wonder what they should choose when they have such CPUs.
Add new entries for those big.LITTLE configurations.
Note: the various combos were added in various gcc versions, but only
really worked in later versions:
Variant | Introduced in | First built in
----------+---------------+----------------
a15-a7 | 4.9 | 4.9
a17-a7 | 5 | 5
a57-a53 | 4.9 | 6
a72-a53 | 5 | 6
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all architecture options to their own symbol, so that it is easier
to add more variants in the future.
The dependency on cross-gcc >= 4.5 is only valid for i386, as we use the
host gcc for x86_64. Adapt the dependency accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
[Thomas:
- add comment about host gcc >= 4.5 dependency on x86-64
- remove bogus "depends on ... if ..." construct.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the build of efivar with gcc 7.x has been fixed by commit
0ca3017034 ("efivar: fix build with gcc
7"), efibootmgr fails similarly with gcc 7.x.
This commit backports an upstream patch that fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on Python implementation used for testing, time it takes to
perform a given test can vary pretty significantly. To accout for that
allow individual test functions to specify different timeout value.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be able to leverage the same test code for testing
different python interpreters (or wrappers around CPython) allow child
classes of TestPythonBase to override the name of the executable used
to run tests.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Python3 version of TestPython2 to make sure both versions of
Python get unit-tested.
Modify the code of libc_time_test() to support that change (convert
the code to use Python3-style "print").
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert TestPythonBase to a true base class that only provides code
implementing various tests without defining tests themselves in a
"discoverable" form.
To retain correct testing functionality, add TestPython2 derived class
that uses code from TestPythonBase to define actual runnable test.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: fix typo in commit log, update .gitlab-ci.yml, both pointed
by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, remounting / read-write (or not) is done by the skeleton
package when the init system is either busybox or sysvinit, by
registering a target-finalize hook; it is not done at all for systemd.
Move registering this target-finalize hook to both of busybox and
sysvinit. Leave systemd alone, we'll take care of it later.
Rename the macro to a more meaningful name, and move it to system.mk
with the other such macros.
Yet a little bit less init-system knowledge in the skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove not-so-useful comments, as pointed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, setting the getty is done:
- by the skeleton package when the init system is either busybox or
sysvinit;
- by the systemd package when the init system is systemd;
both by registering a target-finalize hook.
This is not very consistent.
Move setting the getty out of the skeleton and into the package that
provides the init system, by registering a per-package target-fialize
hook.
This offloads yet a bit more out of the skeleton, so that it is easier
to properly separate the skeletons for the various init systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rather than duplicate that code in all skeleton packages, make this a
macro, so that it is easier to use.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg always enables support for nvenc/cuda even if their support
libraries are not present:
External libraries providing hardware acceleration:
cuda cuvid nvenc
[...]
Enabled hwaccels:
h264_cuvid mjpeg_cuvid mpeg2_cuvid vc1_cuvid vp9_cuvid
hevc_cuvid mpeg1_cuvid mpeg4_cuvid vp8_cuvid
This leads to a crash in freeswitch git master when transcoding video
streams on a system without nvidia hardware:
2017-07-22 15:06:27.306760 [INFO] avcodec.c:1077 initializing encoder 352x288
2017-07-22 15:06:27.306760 [NOTICE] avcodec.c:828 NVENC HW CODEC ENABLED
This patch disables the support of nvidia hardware acceleration support
for now until the needed packages are added to buildroot. For details
about this please refer to https://developer.nvidia.com/ffmpeg
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rsync command is currently called from a single location. In
follow-up patches, it will be called from various places then.
It will be easier to update and fix this command if it is defined in a
single location, rather than if duplicated in many places.
Define a macro that skeleton packages can call to install their skeleton
directories. Since at least one occurrence of it will want to install in
staging, the macro must accept a destination path, rather than hard-code
target as the destination.
Since it is to be used by other skeleton packages, define it early,
outside of any conditional block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently skip the skeleton dependency by checking if the current
package is the skeleton.
We are going to introduce more skeleton-related packages, so we
need a way to exclude the skeleton dependency for those, or we'd
get a circular dependency, for the same reason we need to skip
the toolchain dependency.
Instead of checking for all the skeleton-providing packages in the core
infra, add a new package options so that packages can express they do
not need the dependency on the skeleton, like we have an option to avoid
the depednency on the toolchain. The only packages that will use that
option are probably the skeletons, so we need not document this
variable, like we did not document the option to exclude the dependency
on the toolchain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Rebase on top of mainline 2017.03 release
- Fix sparse image flashing issues
Here are the main Linux modifications:
- Add mma8451 driver support
- Fix possible TiWi spurious interrupts issue
- Fix Ethernet interrupt parent issue
- Add USB Type C TUSB320 controller support
- Add SOM2 i.MX6DL and i.MX6QP variants
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches 0001 to 0004 were upstream backports, so they have been
dropped. Patch 0005 has been upstreamed as commit
af5fb3d6e7. Therefore,
all 5 patches are dropped.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a separate make target to build a relocatable SDK. We first
sanitize the RPATH in host tree. Next we also sanitize the
staging tree. Therefore "sdk" must depend on world.
Sanitizing staging is not really needed, in the sense that any rpath
in there is simply not going to be used. We want to sanitize staging
for the following reasons:
- To avoid leaking references to the original output directory. This
way, we can validate that the SDK is relocatable by running a simple
"grep -r ${BASE_DIR} ${HOST_DIR}". Obviously RPATH sanitization is
not sufficient (e.g. also the references to source files have to be
stripped), but it's a step in the right direction. This reason is
obviously only relevant for the SDK.
- To make sure that when an executable is copied to target that it
actually executes correctly. Since within Buildroot we never copy
stuff from staging to target, this is clearly only relevant for
the SDK.
Finally we install the script "relocate-sdk.sh" into the top directory
of the SDK (HOST_DIR) and the SDK location path is stored in the file
"HOST_DIR/share/buildroot/sdk-location"-
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mfpxx option was added in gcc-5.1.0 so make sure that users cannot
select the "xx" fp32 mode when using toolchains that have a gcc older
than 5.1.0.
-mfp32 and -mfp64 were added in gcc-4.1.0, so given the older gcc
version we support in Buildroot (in the GCC_AT_LEAST options) is 4.3 we
don't need to do anything else for them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mnan option was added in gcc-4.9.0 so make sure that users cannot
select the NaN mode when using toolchains that have a gcc older
than 4.9.0, and also make sure that the -mnan option is not passed at
all to the toolchain-wrapper and target cflags.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note, that since version 2017.07 the sunxi targets needs the Python
libfdt library on the host. Therefore, additionally select the U-Boot
config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT for U-Boot
targets, like sunxi, needing the Python libfdt library.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: drop bogus selects on BR2_PACKAGE_HOST_{PYTHON,SWIG}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 2.16.5 of WebKitGTK+ already includes the fix added by the
removed patch, which is now unneeded.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The user shouldn't need to pass this manually when creating a test-pkg
config file. It's an absolutely harmless option to enable always.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We really want test-pkg to do the test with a paranoid unsafe path.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This minimal configuration is also very useful outside test-pkg. In
addition, it will simplify the config merge in a later patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of letting the configure script automatically detect the
presence of bluez package files, the script is now explicitly
instructed to enable or disable bluez (both 4.x and 5.x) support based
on the selection of the following packages: bluez_utils, bluez5_utils
and sbc.
Indeed, the bluez_utils or bluez5_utils packages were not sufficient
to enable Bluetooth support, the sbc package is also needed, but when
no --enable option is passed, the configure script silently disables
Bluetooth support if one of the dependencies is missing.
Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since ipmitool v1.8.17 usb support is turned off by default. Add a
config option to enable support for the usb interface.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file "qt.conf" can be used to override the hard-coded paths that
are compiled into the Qt library. This is required to make "qmake"
relocatable. Actually, we need to specify all variables to overwrite
the compiled in values.
CC: Julien Corjon <corjon.j@ecagroup.com>
CC: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanitize the RPATH of ELF files in the target tree to deal
with stupid packages that don't correctly use --prefix/DESTDIR
and that end up putting the full absolute build-time directory
in the RPATH.
We do it before copying the overlay and calling the post-build
script. The user is completely responsible for what happens
in the last two steps, and it should never be touched by us.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces the script "fix-rpath" able to scan a tree,
detect ELF files, check their RPATH and fix it in a proper way.
The RPATH fixup is done by the patchelf utility using the option
"--make-rpath-relative <root-directory>".
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch allows to use patchelf to sanitize the rpath of the buildroot
libraries and binaries using the option "--make-rpath-relative <rootdir>".
Recent versions of patchelf will not built on old Debian and RHEL systems
due to C++11 constructs. Therefore we stick with v0.9 for the time being.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The normal shell does not support the bashism "< <(...)". Therefore
we use a normal pipe to find files containing a specific string.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'if __name__ == "__main__"' idiom typically calls main function that
doesn't take any arguments in most cases. We shouldn't pass any tuple to
it.
I've tested the script with python-idna-2.5 and now it works with this
little change.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires libuv and by default will use an internal copy
bundled with the release. Change to using a shared libuv library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires libhttpparser and by default will use an internal copy
bundled with the release. Change to using a shared libhttpparser library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires c-ares and by default will use an internal copy
bundled with the release. Change to using a shared c-ares library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[Thomas:
- tweak Config.in help text as provided by Markus
- adjust commit log
- add missing select BR2_PACKAGE_NCURSES
- add missing dependency on host-pkgconf, used by the tmon Makefile
to find ncurses
- add logic to disable -fstack-protector when the toolchain doesn't
have SSP support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make inclusion ordering of all linux-tool-*.mk sub-makefiles explicit
instead of relying on alphabetical sort order. This is done by
renaming the Linux tools sub-makefiles to the format linux-tool-*.mk.in.
This causes the top-level Makefile to ignore the Linux tools
sub-makefiles.
Until now, the main Makefile included all linux-tool-*.mk files, as
well as linux-tools.mk, and it relied on alphabetical sorting to
include them in the proper order (linux-tool-*.mk before
linux-tools.mk).
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: improve comment in the code as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Add uClibc-ng compatibility fix. This is needed due to missing definition in
netinet/in.h.
Add license file hash.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nvme-cli had many bugfixes and improvements over the releases.
Buildroot still has version 0.3, so this patch bumps it to the
latest upstream release, version 1.3.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog since previous revision:
6a01dfb fix for memory leak in gc_hal_kernel_os.c
f73c35b Add support for PREEMPT_RT kernels
Also updating the help text to make sure users know this module won't
build with Mainline kernel but only with NXP forks.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, defining a config fragment in the runtime test infra requires
that the fragment not to be indented. This is beark, and causes grievance
when looking at the code (e.g. to fix it).
Just strip out all leading spaces/tabs when writing the configuration
lines into the config file, allowing in-line indented config fragments,
like so:
class TestFoo(bla):
config = bla.config + \
"""
FOO=y
# BAR is not set
"""
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-10324 - In libosip2 in GNU oSIP 4.1.0, a malformed SIP
message can lead to a heap buffer overflow in the osip_clrncpy() function
defined in osipparser2/osip_port.c.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MIPS supports two different NaN encodings, legacy and 2008. Information
about MIPS NaN encodings can be found here:
https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
NaN legacy is the only option available for R2 cores and older.
NaN 2008 is the only option available for R6 cores.
R5 cores can have either NaN legacy or NaN 2008, depending on the
implementation. So, if the user selects a generic R5 target architecture
variant, we show a choice menu with both options available. For well
known R5 cores we directly select the NaN enconding they use.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed in the mailing list, grub2 usage notes were growing too big
for a Config.in documentation, and so it was agreed that a readme.txt in
the package directory is a better place to put them.
This commit simply moves the documentation as-is to preserve the
original contents as they were in Config.in which can be worked on in
further commits.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After many years since the last release and a long time with grub 2.02
in beta, there is finally a release and it brings many bug fixes and
interesting features such as support for ARM.
Patch boot/grub2/0001-remove-gets.patch doesn't seem to be required
anymore as grub-core/gnulib/stdio.in.h has changed significantly since
"053cfcd Import new gnulib." and has another treatment for gets.
Patch
boot/grub2/0002-grub-core-gettext-gettext.c-main_context-secondary_c.patch
was a backport which is present after the bump and therefore is also no
longer necessary.
Since we're adding a Config.in comment, we also introduce a
BR2_TARGET_GRUB2_ARCH_SUPPORTS hidden boolean, in order to avoid
repeating the architecture dependencies.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add BR2_TARGET_GRUB2_ARCH_SUPPORTS, remove bogus dependencies
on ARM and AArch64, since enabling Grub2 on those architectures is
done in another commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have wordexp support in uClibc-ng and nodm is available, we can
use it for the graphical defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using this defconfig produces a build error with kodi:
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_SUNXI_MALI=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_PY_ONLY=y
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:37:1:
error: ‘string’ does not name a type
string CFTPParse::getName()
^~~~~~
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:62:25:
error: variable or field ‘setTime’ declared void
void CFTPParse::setTime(string str)
^~~~~~
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:62:25:
error: ‘string’ was not declared in this scope
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep currently doesn't really use wchar support anyways, and when
checking for wchar support, it's checking the host systems ncurses
libraries.
Remove support for ncurses wchar until it's used in sngrep, and remove
the patches used to fix ncurses wchar detection.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux kernel version to 4.12.1 and U-Boot to 2017.05.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the board specific patches which has been applied upstream.
[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since [1], NONLS is added to LSHW_CFLAGS even for glibc based toolchain.
Previously it was not the case since BR2_ENABLE_LOCALE is always
selected for glibc based toolchain.
With NONLS, config.h try to redefine two Intl function (textdomain and
bindtextdomain) that are used by glibc internally.
This break the build with the following error:
sysroot/usr/include/libintl.h:82:52: error: expected unqualified-id before 'throw'
extern char *textdomain (const char *__domainname) __THROW;
The NONLS mode is really for cases where the C library does not provide
*any* gettext implementation, as would be the case with uClibc without
intl stubs enabled.
But in the context of Buildroot, all C libraries provide a gettext
implementation. It might be full-featured or minimal, but it always
exists.
So, remove NONLS from CFLAGS to avoid the build issue with glibc
toolchains.
Build tested with a uClibc toolchain without locale enabled.
Fixes:
http://autobuild.buildroot.net/results/9bf/9bf5437b4348ea8077013b80a51ce05fa328247d
[1] 3acd9f845d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bugtracker is intended to be used for bug reports only, so clarify
it's not meant to be used for "any problem".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pulseaudio configure script autodetects the presence of
bluez 4.x and 5.x packages on the system and will exclude the
bluetooth-related modules in their absence.
This commit ensures that bluez5_utils, if selected, are installed
before pulseaudio. The same already happens for bluez_utils (4.x).
Signed-off-by: Calin Crisan <ccrisan at gmail dot com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsanitizer in gcc fails to build on PowerPC with gcc versions 4.9
and 5.x used in conjunction with glibc 2.25, with the following error:
../../../../gcc-host/libsanitizer/asan/asan_linux.cc: In function 'bool __asan::AsanInterceptsSignal(int)':
../../../../gcc-host/libsanitizer/asan/asan_linux.cc:222:20: error: 'SIGSEGV' was not declared in this scope
return signum == SIGSEGV && common_flags()->handle_segv;
This commit adds a patch that has been submitted to upstream gcc
(https://patchwork.ozlabs.org/patch/725596/) but not merged. The patch
is no longer needed with gcc 6.x and later because the code has been
reworked.
Fixes Buildroot bug #10061
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a Linux kernel patch to solve a build failure with
the arcturus_ucp1020_defconfig with gcc 6.x:
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
The patch is upstream in Linux, and can be dropped when
arcturus_ucp1020_defconfig is updated to use a new Linux kernel
version.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it can be interesting to call back into buildroot from a
post-build/image script (E.G. make printvars or similar). For this to work
correctly with out-of-tree builds we need to pass O= to make, but this is
currently not available in the environment of post-build/image scripts.
In concept, O could be derrived from BUILD_DIR (E.G. by stripping /build),
but directly exporting O is cleaner.
O= cannot be exported globally as it interferes with various build systems,
so instead add it to EXTRA_ENV.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vcdbg utility is linked to a few libraries, which so far were all
provided by the rpi-userland package.
But a not-so-recent bump of rpi-firmware pulled in a vcdbg that is
linked to an additional library, which is not privided by rpi-userland,
so we must install it.
Reported-by: cluelessperson on #buildroot
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-10688 - n LibTIFF 4.0.8, there is a assertion abort in the
TIFFWriteDirectoryTagCheckedLong8Array function in tif_dirwrite.c. A
crafted input will lead to a remote denial of service attack.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove Python2 only dependency as the package is compatible
with Python3.
Add a dot at the end of the help text.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7529 - Nginx versions since 0.5.6 up to and including 1.13.2
are vulnerable to integer overflow vulnerability in nginx range filter
module resulting into leak of potentially sensitive information triggered by
specially crafted request.
For more details, see:
http://mailman.nginx.org/pipermail/nginx-announce/2017/000200.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000381 - The c-ares function ares_parse_naptr_reply(), which
is used for parsing NAPTR responses, could be triggered to read memory
outside of the given input buffer if the passed in DNS response packet was
crafted in a particular way. This patch checks that there is enough data
for the required elements of an NAPTR record (2 int16, 3 bytes for string
lengths) before processing a record.
See https://nodejs.org/en/blog/release/v8.1.4/
[Peter: add CVE info]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-11103:
All versions of Samba from 4.0.0 onwards using embedded Heimdal
Kerberos are vulnerable to a man-in-the-middle attack impersonating
a trusted server, who may gain elevated access to the domain by
returning malicious replication or authorization data.
Samba binaries built against MIT Kerberos are not vulnerable.
https://www.samba.org/samba/history/samba-4.5.12.html
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patches 0003 & 0004, applied upstream.
Fixes the following security issues:
CVE-2017-7244 - The _pcre32_xclass function in pcre_xclass.c in libpcre1 in
PCRE 8.40 allows remote attackers to cause a denial of service (invalid
memory read) via a crafted file.
CVE-2017-7245 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 4) or possibly have unspecified
other impact via a crafted file.
CVE-2017-7246 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 268) or possibly have unspecified
other impact via a crafted file.
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/
inside the PYTHON_PATH variable, which gets used to define PYTHONPATH,
passed to the host Python interpreter when building/installing target
packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
Making this change allows to fix the python-cffi related build
failures:
http://autobuild.buildroot.net/results/a9af84f2d845ee25e2b7d8b92aef485112b46060/
(python-cryptography)
http://autobuild.buildroot.net/results/b017c4f6b4d45c0afbf06a80dbd3f2ebe5d49d20/
(python-pynacl)
http://autobuild.buildroot.net/results/25144ea191ad46d851b31d3a2f0ef939f215494b/
(python-smbus-cffi)
This change has been verified with the following defconfig that
enables a lot of Python packages:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.05-834-gb595627.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_ALSAAUDIO=y
BR2_PACKAGE_PYTHON_ARROW=y
BR2_PACKAGE_PYTHON_ATTRS=y
BR2_PACKAGE_PYTHON_AUTOBAHN=y
BR2_PACKAGE_PYTHON_BITSTRING=y
BR2_PACKAGE_PYTHON_BOTTLE=y
BR2_PACKAGE_PYTHON_CAN=y
BR2_PACKAGE_PYTHON_CBOR=y
BR2_PACKAGE_PYTHON_CHARDET=y
BR2_PACKAGE_PYTHON_CHEETAH=y
BR2_PACKAGE_PYTHON_CHERRYPY=y
BR2_PACKAGE_PYTHON_CONFIGOBJ=y
BR2_PACKAGE_PYTHON_CONFIGSHELL_FB=y
BR2_PACKAGE_PYTHON_CRC16=y
BR2_PACKAGE_PYTHON_CRCMOD=y
BR2_PACKAGE_PYTHON_CSSSELECT=y
BR2_PACKAGE_PYTHON_CSSUTILS=y
BR2_PACKAGE_PYTHON_DAEMON=y
BR2_PACKAGE_PYTHON_DIALOG=y
BR2_PACKAGE_PYTHON_DICTTOXML=y
BR2_PACKAGE_PYTHON_DJANGO=y
BR2_PACKAGE_PYTHON_DOCOPT=y
BR2_PACKAGE_PYTHON_DPKT=y
BR2_PACKAGE_PYTHON_ECDSA=y
BR2_PACKAGE_PYTHON_ENUM=y
BR2_PACKAGE_PYTHON_FLASK_BABEL=y
BR2_PACKAGE_PYTHON_FLASK_JSONRPC=y
BR2_PACKAGE_PYTHON_FLASK_LOGIN=y
BR2_PACKAGE_PYTHON_FLUP=y
BR2_PACKAGE_PYTHON_GOBJECT=y
BR2_PACKAGE_PYTHON_GUNICORN=y
BR2_PACKAGE_PYTHON_HTML5LIB=y
BR2_PACKAGE_PYTHON_HTTPLIB2=y
BR2_PACKAGE_PYTHON_HUMANIZE=y
BR2_PACKAGE_PYTHON_ID3=y
BR2_PACKAGE_PYTHON_INIPARSE=y
BR2_PACKAGE_PYTHON_IOWAIT=y
BR2_PACKAGE_PYTHON_IPADDR=y
BR2_PACKAGE_PYTHON_IPY=y
BR2_PACKAGE_PYTHON_IPYTHON=y
BR2_PACKAGE_PYTHON_JSON_SCHEMA_VALIDATOR=y
BR2_PACKAGE_PYTHON_KEYRING=y
BR2_PACKAGE_PYTHON_LIBCONFIG=y
BR2_PACKAGE_PYTHON_LMDB=y
BR2_PACKAGE_PYTHON_LXML=y
BR2_PACKAGE_PYTHON_MAD=y
BR2_PACKAGE_PYTHON_MARKDOWN=y
BR2_PACKAGE_PYTHON_MELD3=y
BR2_PACKAGE_PYTHON_MISTUNE=y
BR2_PACKAGE_PYTHON_MSGPACK=y
BR2_PACKAGE_PYTHON_MUTAGEN=y
BR2_PACKAGE_PYTHON_MWSCRAPE=y
BR2_PACKAGE_PYTHON_NETADDR=y
BR2_PACKAGE_PYTHON_NETIFACES=y
BR2_PACKAGE_PYTHON_NFC=y
BR2_PACKAGE_PYTHON_NUMPY=y
BR2_PACKAGE_PYTHON_PAHO_MQTT=y
BR2_PACKAGE_PYTHON_PAM=y
BR2_PACKAGE_PYTHON_PARAMIKO=y
BR2_PACKAGE_PYTHON_PILLOW=y
BR2_PACKAGE_PYTHON_POSIX_IPC=y
BR2_PACKAGE_PYTHON_PSUTIL=y
BR2_PACKAGE_PYTHON_PUDB=y
BR2_PACKAGE_PYTHON_PYCLI=y
BR2_PACKAGE_PYTHON_PYCPARSER=y
BR2_PACKAGE_PYTHON_PYELFTOOLS=y
BR2_PACKAGE_PYTHON_PYFTPDLIB=y
BR2_PACKAGE_PYTHON_PYGAME=y
BR2_PACKAGE_PYTHON_PYGAME_IMAGE=y
BR2_PACKAGE_PYTHON_PYGAME_EXAMPLES=y
BR2_PACKAGE_PYTHON_PYGAME_FONT=y
BR2_PACKAGE_PYTHON_PYGAME_MIXER=y
BR2_PACKAGE_PYTHON_PYINOTIFY=y
BR2_PACKAGE_PYTHON_PYLIBFTDI=y
BR2_PACKAGE_PYTHON_PYMYSQL=y
BR2_PACKAGE_PYTHON_PYPARTED=y
BR2_PACKAGE_PYTHON_PYPCAP=y
BR2_PACKAGE_PYTHON_PYQRCODE=y
BR2_PACKAGE_PYTHON_PYRATEMP=y
BR2_PACKAGE_PYTHON_PYRO=y
BR2_PACKAGE_PYTHON_PYROUTE2=y
BR2_PACKAGE_PYTHON_PYSENDFILE=y
BR2_PACKAGE_PYTHON_PYSMB=y
BR2_PACKAGE_PYTHON_PYSNMP_APPS=y
BR2_PACKAGE_PYTHON_PYSNMP_MIBS=y
BR2_PACKAGE_PYTHON_PYSOCKS=y
BR2_PACKAGE_PYTHON_PYTABLEWRITER=y
BR2_PACKAGE_PYTHON_PYTRIE=y
BR2_PACKAGE_PYTHON_PYUSB=y
BR2_PACKAGE_PYTHON_PYXB=y
BR2_PACKAGE_PYTHON_PYZMQ=y
BR2_PACKAGE_PYTHON_REQUESTS_TOOLBELT=y
BR2_PACKAGE_PYTHON_RPI_GPIO=y
BR2_PACKAGE_PYTHON_RTSLIB_FB=y
BR2_PACKAGE_PYTHON_SDNOTIFY=y
BR2_PACKAGE_PYTHON_SERIAL=y
BR2_PACKAGE_PYTHON_SETPROCTITLE=y
BR2_PACKAGE_PYTHON_SH=y
BR2_PACKAGE_PYTHON_SHUTILWHICH=y
BR2_PACKAGE_PYTHON_SIMPLEJSON=y
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
BR2_PACKAGE_PYTHON_SOCKETIO=y
BR2_PACKAGE_PYTHON_SORTEDCONTAINERS=y
BR2_PACKAGE_PYTHON_SPIDEV=y
BR2_PACKAGE_PYTHON_THRIFT=y
BR2_PACKAGE_PYTHON_TOMAKO=y
BR2_PACKAGE_PYTHON_TREQ=y
BR2_PACKAGE_PYTHON_U_MSGPACK=y
BR2_PACKAGE_PYTHON_UBJSON=y
BR2_PACKAGE_PYTHON_UJSON=y
BR2_PACKAGE_PYTHON_URLLIB3=y
BR2_PACKAGE_PYTHON_VERSIONTOOLS=y
BR2_PACKAGE_PYTHON_WATCHDOG=y
BR2_PACKAGE_PYTHON_WEB2PY=y
BR2_PACKAGE_PYTHON_WEBPY=y
BR2_PACKAGE_PYTHON_WHOOSH=y
BR2_PACKAGE_PYTHON_WS4PY=y
BR2_PACKAGE_PYTHON_WSACCEL=y
BR2_PACKAGE_PYTHON_XLUTILS=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-treq package lists the incremental Python module as part of
its setup_requires variable in setup.py, so it must be added as a host
dependency of the python-treq package to avoid build failures.
So far, this issue wasn't visible because python-treq selects
python-twisted, which itself selects the target python-incremental
package. Because python-incremental was before python-treq in the
alphabetic ordering, it was always built before python-treq. And due
to the fact that PYTHONPATH currently contains the directory with
target Python modules, the host Python interpreter was happily using
the target python-incremental while running on the host. But as we are
going to clean up PYTHONPATH, this will no longer be the case, and
hence python-treq needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-json-schema-validator does not need versiontools on the target,
but only on the host, as it's listed in setup_requires in setup.py.
This was not noticed so far because host Python interpreter is started
with a PYTHONPATH that contains a directory with target Python
packages, so versiontools was found there. But as we are about to fix
PYTHONPATH to no longer include such a directory,
python-json-schema-validator would fail due to versiontools being
missed on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-u-msgpack can use setuptools instead of distutils, and
using setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyro can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyasn can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Main difference is that the drm driver now supports the hdmi output.
The gxl variant device tree has been renamed in:
commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date: Fri Jan 20 07:57:52 2017 -0800
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
name in the DTS filename for clarity. Rename this file accordingly to
be consistent with the rest of the GXL DTS files.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
So adjust the defconfig and boot script to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though PyPI says the license is BSD, GitHub repo has an MIT license
file since April 2017 and upstream setup.py was also fixed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the following patches:
* the Xtensa patches 870 and 871 are upstream now
* patch 942 was backported to GCC 6 branch
Note, that a bz2 release tarball is not provided anymore and is replaced by
a xz tarball file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libssh2 support mbedtls as crypto back-end library since version 1.8.0.
Default to mbedtls since it's smaller than either libgcrypt or openssl.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
- Extend pow tables for layer III to properly handle files with i-stereo and
5-bit scalefactors. Never observed them for real, just as fuzzed input to
trigger the read overflow. Note: This one goes on record as CVE-2017-11126,
calling remote denial of service. While the accesses are out of bounds for
the pow tables, they still are safely within libmpg123's memory (other
static tables). Just wrong values are used for computation, no actual crash
unless you use something like GCC's AddressSanitizer, nor any information
disclosure.
- Avoid left-shifts of negative integers in layer I decoding.
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop CVE 2017-9868 patch as that is now upstream.
1.4.14 is a bugfix release, fixing significant websocket performance /
correctness issues.
Use HTTPS for the download as the server uses HSTS, thus saving a redirect.
While we're at it, add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-7890 - Buffer over-read into uninitialized memory. The GIF
decoding function gdImageCreateFromGifCtx in gd_gif_in.c (which can be
reached with a call to the imagecreatefromstring() function) uses
constant-sized color tables of size 3 * 256, but does not zero-out these
arrays before use.
CVE-2017-9224, CVE-2017-9226, CVE-2017-9227, CVE-2017-9228, CVE-2017-9229 -
Out-of-bonds access in oniguruma regexp library.
CVE-2017-11144 - In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before
7.1.7, the openssl extension PEM sealing code did not check the return value
of the OpenSSL sealing function, which could lead to a crash of the PHP
interpreter, related to an interpretation conflict for a negative number in
ext/openssl/openssl.c, and an OpenSSL documentation omission.
CVE-2017-11145 - In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before
7.1.7, lack of a bounds check in the date extension's timelib_meridian
parsing code could be used by attackers able to supply date strings to leak
information from the interpreter, related to an ext/date/lib/parse_date.c
out-of-bounds read affecting the php_parse_date function.
CVE-2017-11146 - In PHP through 5.6.31, 7.x through 7.0.21, and 7.1.x
through 7.1.7, lack of bounds checks in the date extension's
timelib_meridian parsing code could be used by attackers able to supply date
strings to leak information from the interpreter, related to
ext/date/lib/parse_date.c out-of-bounds reads affecting the php_parse_date
function. NOTE: this vulnerability exists because of an incomplete fix for
CVE-2017-11145.
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patches fixing the following security issues:
CVE-2017-10971:
The endianess handling for X Events assumed a fixed size of X Event structures and
had a specific 32 byte stack buffer for that.
However "GenericEvents" can have any size, so if the events were sent in the wrong
endianess, this stack buffer could be overflowed easily.
So authenticated X users could overflow the stack in the X Server and with the X
server usually running as root gaining root prileveges.
CVE-2017-10972:
An information leak out of the X server due to an uninitialized stack area when swapping
event endianess.
For more details, see the advisory:
http://www.openwall.com/lists/oss-security/2017/07/06/6
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit b78b50465c, the initialisation
of BRTest.builddir was moved to the __init__ function. However, it is
set based on BRTest.outputdir and that is only set when the -o argument
is given to run-tests. When called as "run-tests -l", there is no -o
argument so BRTest.outputdir remains unset.
To fix, keep BRTest.builddir at None when BRTest.outputdir is None.
While we're at it, drop the direct access to the class member. If a
subclass wishes to set outputdir to something else before calling
BRTest.__init__, they are free to do so.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes no sense to default to an arbitrary path. In addition, it in
fact works correctly when it is empty. In that case, the toolchain will
be searched in PATH.
Update the help text to explain the above, and also that the compiler
is supposed to be in the bin subdirectory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BRTest's setUp() method contains a few assignments that initialize its
member variables. Since we will want to use these in test case
overrides, move them to the __init__ function.
Also allow the config member to be overridden, rather than always
taking the class member.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 14151d77af that eliminated
$(HOST_DIR)/usr seriously missed the toolchain-wrapper - only a single
reference was updated, the other three were missed. Commit
015d68c84c removed one more. This commit
finally removes the two remaining ones.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up to now we created the $(HOST_DIR)/usr compatibility symlink as part
of the creation of $(HOST_DIR) itself. However, when the user specifies
a custom BR2_HOST_DIR, it is possible that the directory already exists
so this rule will never trigger.
Therefore, add an explicit rule for creating $(HOST_DIR)/usr and add
this rule to the dependencies of the dirs target. HOST_DIR itself goes
back to the standard rule for directories. The order-only dependency of
STAGING_DIR isn't needed any more either: HOST_DIR is implicitly
created if needed by mkdir -p, and we don't need to trigger the
HOST_DIR rule any more if the directory already exists.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tarballs of the releases are now again available:
https://www.spinics.net/lists/linux-i2c/msg30349.html
So change back to that instead of getting the source code from git.
While we're at it, add a hash for the license file.
[Peter: Also update Config.in homepage URL as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We had several remarks on the mailing list of users that were surprised
that patches were not applied for packages whose SITE_METHOD is local.
So document this.
Note that for OVERRIDE_SRCDIR itself it is already documented:
When Buildroot finds that for a given package, an
<pkg>_OVERRIDE_SRCDIR has been defined, it will no longer attempt to
download, extract and patch the package. Instead, it will directly use
the source code available in in the specified directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to U-Boot before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to linux before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be interesting to get the overlay from a remote server, rather
than expect it to be present locally.
Since that file can be any URL, we can't know its hash, so we just
exclude it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
[Thomas: use DL_DIR instead of BR2_DL_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently, specifying a custom Xtrensa core is done with two variables:
- the core name
- the directory containing the overlay tarball
However, the core name only serves to construct the tarball name, and is
not used whatsoever to configure any of the toolchain components
(binutils, gcc or gdb), except through the files that are overlayed in
their respective source trees.
This has two main drawbacks:
- the overlay file must be named after the core,
- the tarball can not be compressed.
Furthermore, it also makes it extremely complex to implement a download
of that tarball.
So, those two variables can be squeezed into a single variable, that is
the complete path of the overlay tarball.
Update the qemu-xtensa defconfig accordingly.
Note: we do not add a legacy entry for BR2_XTENSA_CORE_NAME, since it
was previously a blind option in the last release, and there's been no
release since we removed BR2_XTENSA_CUSTOM_NAME. So, we just update the
legacy comments for BR2_XTENSA_CUSTOM_NAME, since that's all the user
could have seen in any of our releases so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not needed to have an intermediate blind option, we can just
hide the prompt behind the same dependency as the non-blind symbol.
Update our qemu-xtensa defconfig acordingly (note: it was using
different values for both options, which is not possible; the blind
option was just set to the non-blind one in the .config).
Also remove an unneeded empty default for the BR2_XTENSA_OVERLAY_DIR
string option (strings are empty by default).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change deprecates the ext2/3/4 rootfs size in blocks symbol in
favor of one that mimic the fs-size argument behavior of mkfs (i.e.
size in a human readable format accepting k, m, g or t suffix or their
upper-case variants).
This change also updates the defconfigs that used to set
BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libressl is a fork of openssl from OpenSSL in 2014. Its goal is to
modernize the OpenSSL codebase, improve security, and apply best
practice development processes.
Right now, libressl is API compatible with OpenSSL 1.0.1, but does not
yet include all new APIs from OpenSSL 1.0.2 and later.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the advisory:
https://irssi.org/security/irssi_sa_2017_07.txt
Two vulnerabilities have been located in Irssi.
(a) When receiving messages with invalid time stamps, Irssi would try
to dereference a NULL pointer. Found by Brian 'geeknik' Carpenter
of Geeknik Labs. (CWE-690)
CVE-2017-10965 [2] was assigned to this bug
(b) While updating the internal nick list, Irssi may incorrectly use
the GHashTable interface and free the nick while updating it. This
will then result in use-after-free conditions on each access of
the hash table. Found by Brian 'geeknik' Carpenter of Geeknik
Labs. (CWE-416 caused by CWE-227)
CVE-2017-10966 [3] was assigned to this bug
Impact
------
(a) May result in denial of service (remote crash).
(b) Undefined behaviour.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While building I noticed:
>>> host-ccache 3.3.4 Building
conf.c: In function 'conf_create':
conf.c:314:2: warning: too many arguments for format [-Wformat-extra-args]
conf->cache_dir = format("/home/peko/.buildroot-ccache", get_home_directory());
^
As host-ccache gets installed into $(HOST_DIR) and is part of the SDK,
hardcoding the build user homedir isn't really nice for the relocatable
SDK feature (or simply for a SDK used by multiple users).
As the warning shows, CCache replaces "%s" with the current user home
directory, so rewrite BR_CACHE_DIR to use this feature if it begins with
$HOME.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We no longer have automatic derivation of DEPENDENCIES for host
packages, so the comment that we don't want a host-busybox dependency
is no longer valid.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing the option --shebangdir=/usr/bin to the configuration script adds the
CPP definition EXECLINE_SHEBANGPREFIX to
execline-x.y.z/src/include/execline/config.h. It is used by `s6-rc-compile` from
the s6-rc package to set the path to the execline interpreter in the scripts it
generates.
So, when building the host variant of execline, this path will be used in the
target service scripts generated by the host variant of `s6-rc-compile`. If not
forced to /usr/bin, the location of the execline interpreter on the target, it
will default to $(HOST_DIR)/bin thus leading to non-working scripts on the
target.
So, restore this option for the host variant.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since mtd was converted to the package infrastructure in commit
de4cf4e913 ("mtd: convert to gentargets,
add host package"), its host variant depended on host-e2fsprogs. At
the time, only a host variant of the mtd package was available.
When a target variant of mtd was introduced in commit
b50e0fa113 ("mtd: add option to build
mkfs.ubifs for target"), it depended on util-linux.
So today, the target variant continues to depend on util-linux, while
the host variant depends on e2fsprogs. What mkfs.ubifs really needs
is libuuid, which is provided by util-linux. It was in fact provided
by the fact that host-e2fsprogs depends on host-util-linux.
But really, host-e2fsprogs is not needed as a dependency, so use
host-util-linux to be consistent with the target variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain wrapper, when called through PATH, strips the last three
levels of /proc/self/exe to find HOST_DIR. However, after the host/usr
removal, this should be just two levels.
The toolchain wrapper has different logic for when it is called with a
full path (i.e. $HOST_DIR/usr/bin/arm-linux-gcc) then when it is called
through the PATH (i.e. just arm-linux-gcc). The latter is never used
internally in Buildroot, that's why this wasn't discovered through
testing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Mark Jackson <mpfj-list@newflow.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libgrcrypt is a direct dependency of WebKitGTK+, and as such it
should be selected.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add missing dependency on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is needed for correctly building some CMake-based packages which
use this variable. For example, this is needed for WebKitGTK+ 2.16.x
to build correctly when an ARMv8 target is configured.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This file is not a package per-se, it includes other .mk files that
are packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The waf package infrastructure was not known by the pkg-stats script,
so let's add it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With 2000+ packages it's not trivial to identify i.e.:
- all packages that don't have a hash file;
- all packages that have patches;
- all packages that have code style warnings;
User experience can be improved by dynamically sorting the resulting
table.
There is an open-source solution that does that in the client-side and
requires minimal changes to our script: sorttable.js. The script is
MIT licensed as stated in its website.
Also add a hint to the user that the table can be sorted.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there is quite some duplication in the variables to be passed in
the make environment and as make options between the build and install
steps, this commit introduces LINUXPTP_MAKE_ENV and LINUXPTP_MAKE_OPTS
to avoid the duplication.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
incdefs.sh try to define some flags with user_flags() and kernel_flags()
functions. The later is looking at the kernel headers installed on the host
when KBUILD_OUTPUT is not set. If no kernel headers are installed on the host,
the grep fail and HAVE_ONESTEP_SYNC is not set on the command line:
see: grep: /usr/include/linux/net_tstamp.h: No such file or directory
So the missing.h define HWTSTAMP_TX_ONESTEP_SYNC which is also present in the
kernel headers installed in STAGING_DIR (toolchain w/ headers >= 3.2).
Indeed KBUILD_OUTPUT is empty because it's reset in the makefile, so move
KBUILD_OUTPUT in the enviroment while calling "make"/
Also set KBUILD_OUTPUT to STAGING_DIR to find net_tstamp.h.
While at it, use the same arguments for BUILD_CMDS and
INSTALL_TARGET_CMDS.
Thanks to Yann for the live review during the Buildroot summer camp.
Fixes:
http://autobuild.buildroot.net/results/364/36470db2c262d2e1fda5144a08cfe221831e093e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Petr Kulhavy <brain@jikos.cz>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The XVISOR_ARCH check added in commit
117fd5dfbc ("xvisor: fix build on
AArch64") broke Buildroot entirely on all architectures except ARM,
AArch64 and x86-64, because the $(error ...) test was not enclosed
inside a condition that made sure the xvisor package was enabled.
This commit fixes that, and allows Buildroot to be usable again on all
architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 32bec8ee2f
("toolchain-external: copy ld*.so* for all C libraries") we changed
how the musl dynamic linker symbolic link was being created. Instead
of having specific logic in Buildroot, we switched to simply copying
the ld*.so.* symbolic link from staging to target, as well as the
target of this symbolic link.
However, it turns out that by default, musl creates its dynamic linker
symbolic link with an absolute path as the target of the link:
/lib/libc.so.
Therefore, external Musl toolchains built with Buildroot look like
this:
lrwxrwxrwx 1 thomas thomas 12 Jul 4 19:46 ld-musl-armhf.so.1 -> /lib/libc.so
The principle of the copy_toolchain_lib_root function, which is used
to copy libraries from staging to target, is to copy symbolic links
and follow their targets. In this case, it means we end up copying
/lib/libc.so (from the host machine) into the target folder. From
there on, there are two cases:
1. /lib/libc.so exists in your host system. It gets copied to the
target. But later on, Buildroot also copies /lib/libc.so from
staging to target, overwriting the bogus libc.so. So everything
works fine, even though it's admittedly ugly.
2. /lib/libc.so doesn't exist in your host system. In this case, the
build fails with no clear error message.
This problem does not happen with Musl toolchains built by
Crosstool-NG, because Crosstool-NG replaces the absolute target of the
dynamic linker symbolic link by a relative path.
However, since we want to support existing Buildroot Musl toolchains
and generally work with the fact that Musl by default installs an
absolute symlink, the following commit improves the
copy_toolchain_sysroot function to replace symbolic links with an
absolute destination to use a relative destination. I.e, in staging,
the ld-musl-armhf.so.1 symbolic link looks like this:
lrwxrwxrwx 1 thomas thomas 14 Jul 5 22:59 output/staging/lib/ld-musl-armhf.so.1 -> ../lib/libc.so
Fixes:
http://autobuild.buildroot.net/results/ce80264575918a8f71d9eab1091c21df85b65b1a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xvisor was failing to build on AArch64 with:
package/xvisor/xvisor.mk:60: *** No Xvisor defconfig name specified, check your BR2_PACKAGE_XVISOR_DEFCONFIG setting. Stop.
The first problem is that the Config.in file had a typo: it was using
BR2_AARCH64 instead of BR2_aarch64, and therefore the
BR2_PACKAGE_XVISOR_DEFCONFIG variable had no value.
Once this is fixed, another problem occurs: the ARCH variable needs to
be specified as "arm" for XVisor, for both ARM and AArch64. Therefore,
a XVISOR_ARCH variable is introduced, which is calculated according to
the Buildroot configuration options. Only x86-64, arm and aarch64 are
supported by Xvisor currently, so it remains simple.
Fixes:
http://autobuild.buildroot.net/results/1719a63ff257f13634a06a14327abfb327984101/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b3cc7e65ee, the definition of the DESTDIR variable was moved
down into the loop that follows symlinks in the libraries that are
copied to target. However, the corresponding mkdir was not moved down,
so that no directories are ever created.
In practice, this mkdir is normally redundant since the directories
should already have been created as part of creating STAGING_DIR.
Still, the current situation is clearly wrong, so fix it by moving the
mkdir down to after the assignment to DESTDIR.
While we're at it, also remove a redundant empty line. It's a leftover
from when a lot of variables were declared above.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simply updates to the latest stable release. WebKitGTK+ versions
in the 2.1x series avoid bumping the dependencies in order to allow
distributions to provide updates, therefore no new dependencies are
needed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now all packages have been updated to install things in $(HOST_DIR)/lib
instead of $(HOST_DIR)/usr/lib, there should no longer be any reason
to have $(HOST_DIR)/usr/lib in the RPATH, so we don't allow it any more.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tools are now installed in host/bin instead of host/usr/bin.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This silences the annoying warning that there is no hash file for our
own COPYING file.
Also change the message so that it is more obvious what we're doing.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build passes the --shebangdir configure option, the target
build doesn't. With the removal of $(HOST_DIR)/usr, it is not clear
if this should be /bin or /usr/bin or $(HOST_DIR)/bin. Looking at the
source code, it turns out that this variable is not used at all, and
/usr/bin doesn't appear anywhere in the installed files.
Since it is not clear what this option should be set to, and it
anyway doesn't do anything, remove it entirely.
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
policycoreutils has a pretty peculiar interpretation of DESTDIR and
PREFIX. PREFIX is not consistently used: some installation paths and
include paths are forced to $(DESTDIR)/usr/... . In other cases,
PREFIX is indeed used. PREFIX defaults to $(DESTDIR)/usr
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: some things are
still installed in $(HOST_DIR)/usr - but nothing we care about (just
manpages, systemd services, ...). More importantly, however, it still
looks for e.g. D-Bus in $(DESTDIR)/usr/include/dbus-1.0.
Still, it's better than nothing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
checkpolicy has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX simply defaults to $(DESTDIR)/usr, and is used in the rest of
the build system. DESTDIR isn't used any further.
For the host installation, we don't want the usr part, so set PREFIX
instead of DESTDIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libselinux has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . In other cases, PREFIX is indeed used. PREFIX
defaults to $(DESTDIR)/usr.
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: man pages are
still installed in $(HOST_DIR)/usr - but we don't care about that.
Also simplify the symlink creation, like how it's done in libsepol.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsemanage has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . In other cases, PREFIX is indeed used. PREFIX
defaults to $(DESTDIR)/usr
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: man pages are
still installed in $(HOST_DIR)/usr - but we don't care about that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 builds for the target but installs with DESTDIR=$(HOST_DIR). Since
we set prefix to /usr in TARGET_CONF_OPTS, this results in installing
things in $(HOST_DIR)/usr.
To make sure we don't install in $(HOST_DIR)/usr, override --prefix and
--exec-prefix.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have a patch that adds $(DESTDIR) to the install commands of
raspberrypi-usbboot, but it would still be installed in $(DESTDIR)/usr.
We don't want that, so remove the /usr part in the installation
commands.
Note that upstream has removed the 'install' target entirely, so
there's no point trying to keep the patch in upstreamable shape (i.e.
defaulting DESTDIR to /usr).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
genromfs is special because it uses "PREFIX" in the meaning of DESTDIR
and "prefix" in the meaning of prefix. We were up to know using it
incorrectly for host: PREFIX shouldn't be set and only prefix should
be set.
Add an explanatory comment for this unusual behaviour.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\$(HOST_DIR)/usr%$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/share' | xargs sed -i 's%$(HOST_DIR)/usr/share%$(HOST_DIR)/share%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/include' | xargs sed -i 's%$(HOST_DIR)/usr/include%$(HOST_DIR)/include%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/lib' | xargs sed -i 's%$(HOST_DIR)/usr/lib%$(HOST_DIR)/lib%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/sbin' | xargs sed -i 's%$(HOST_DIR)/usr/sbin%$(HOST_DIR)/sbin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\(prefix\|PREFIX\)=\("\?\)\$(HOST_DIR)/usr%\1=\2$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FEATURE_CLEAN_UP is a configuration feature to get busybox to explicitly
call free() on dynamic allocated memory just before exiting so memory leak
detectors like valgrind don't get confused. Upstream explicitly recommends
to NOT enable this option:
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
As a size optimization, busybox normally exits without explicitly
freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
Having this option enabled adds a bit of bloat, but more significantly these
cleanup code paths don't get tested very often so some times get out of sync
with the allocation code which can lead to crashes (or security issues from
double frees), so it is safer to disable the option.
For people wanting to debug memory leak issues with busybox, the option can
still be enabled with a configuration fragment (or a custom config).
The size difference isn't huge (br-arm-full-static):
-rwxr-xr-x 1 peko peko 886K Jul 5 10:56 output-busybox1/target/bin/busybox
-rwxr-xr-x 1 peko peko 882K Jul 5 10:53 output-busybox2/target/bin/busybox
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In copy_toolchain_sysroot, if no ld.so has been found in the
STAGING_DIR after the sysroot copy, we look at ARCH_SYSROOT_DIR if a
ld.so is available there. We do this for both ld*.so and ld*.so.*.
However, when copying thing from staging to target (as listed in
TOOLCHAIN_EXTERNAL_LIBS), we only match on ld*.so.*. This would mean
that even if a dynamic linker matching ld*.so but not ld*.so.* was
copied into staging by copy_toolchain_sysroot, it would anyway not be
copied to the target filesystem, making the system unusable.
Therefore, we can remove the special case on ld*.so, and keep only
ld*.so.*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgcc_s.so is now added to TOOLCHAIN_EXTERNAL_LIBS for glibc/uclibc
in one place, and for musl in another place. Bottom line: it should be
in TOOLCHAIN_EXTERNAL_LIBS unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These tests simply build a system with musl and uclibc toolchains, and
boot them under qemu. It allows to minimally validate that our support
for musl/uclibc external toolchains is working. We already had some
tests covering glibc toolchains, so we can now easily test that all
three C libraries are supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit is part of the series, as I've written/used those tests to
validate that things are still working correctly with all of glibc,
uclibc and musl toolchains.
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
$(PKG)_ERLANG_LIBDIR is problematic because it is used both for host
and staging/target. Therefore, the usr/ part is removed from it, and
added the the callers instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of python packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of autotools packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/lib and $(HOST_DIR)/usr/lib are the same directory, it
doesn't make sense to pass both to LDFLAGS.
Also use $(HOST_DIR)/lib instead of $(HOST_DIR)/usr/lib for the RPATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since $(HOST_DIR)/usr/{bin,sbin} are now symlinks to
$(HOST_DIR)/{bin,sbin}, it makes no sense to check them - they are
already covered.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into $(HOST_DIR)/usr/lib without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/lib to ../lib.
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we also have to update the
check-host-rpath script to accept both $(HOST_DIR)/usr/lib and
$(HOST_DIR)/lib, because depending on how the package derives the
path, it may be different.
Since there are some dependency chains that involve $(STAGING_DIR),
$(STAGING_DIR) may in fact be created before $(HOST_DIR). Since
$(STAGING_DIR) is a subdirectory of $(HOST_DIR), it is possible that the
newly added rule for $(HOST_DIR) never triggers. To make sure that the
rule does trigger, add an order-only dependency from $(STAGING_DIR) to
$(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into
$(HOST_DIR)/usr/$(GNU_TARGET_NAME) (i.e., binutils and gcc) without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/$(GNU_TARGET_NAME) to
../$(GNU_TARGET_NAME).
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
Effectively, the usr/ part is removed from $(STAGING_SUBDIR) (and
therefore from $(STAGING_DIR)), so update the definition of that
variable right away.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gettext revamp has some user-visible changes, so this commit
updates the CHANGES file to document them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The way gettext is handled in Buildroot has significantly changed,
with changes visible to packages. This commit updates the relevant
section of the manual to document how packages should now interact
with the gettext support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that all packages have been migrated to the new gettext logic, we
can remove the BR2_NEEDS_GETTEXT and BR2_NEEDS_GETTEXT_IF_LOCALE
variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
patch and special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Patch
0001-Makefile-fix-static-linking-issue-with-lintl.patch was added to
allow passing -lintl through LIBS, in a place that works for static
linking.
However, for dynamic linking, we can simply pass -lintl through the
existing LDFLAGS variable, as it was done prior to commit
38bfd129c6 ("package/net-tools: fix
static linking issue with lintl").
This commit does that and gets rid of the now useless patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code in e2fsprogs that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection, which means we no longer
need to depend on BR2_USE_WCHAR, so this dependency is dropped
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Carlos Santos <casantos@datacom.ind.br>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- pass --with-libintl-prefix only when a separate libintl library is
available
- dropping BR2_PACKAGE_GETTEXT selection
- removing a musl-specific workaround. Indeed, when NLS is enabled,
we now have the full-blown libintl, even with the musl C library
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection. Thanks to this, we can drop
the BR2_USE_WCHAR dependency
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
whether NLS support is enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection. The BR2_USE_WCHAR
dependency was only needed for gettext, so it is no longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is not needed: libbfd is now properly linked against libintl, so
libintl is pulled in automatically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection. We adjust the comment
explaining the BR2_USE_WCHAR dependency, since gettext is no longer
the reason for this dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies on
gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies on
gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
The BR2_USE_WCHAR dependency was needed for gettext, now that we no
longer need gettext, we can also get rid of this dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of relying on binutils
depending on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
In addition, we now use BR2_SYSTEM_ENABLE_NLS instead of
BR2_ENABLE_LOCALE to decide if NLS support should be enabled or
disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
The BR2_USE_WCHAR dependency was only needed for gettext. But now, we
no longer need gettext unconditionally, so this dependency on
BR2_USE_WCHAR is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit uses TARGET_NLS_DEPENDENCIES instead of existing logic to
add the dependency on gettext. To keep the existing behavior, we keep
the --with-libintl-prefix option, but only when a libintl library is
effectively provided by gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl. This wasn't
done so far, but is needed for the build to work, because uClibc
now has a stub gettext implementation, which is mistaken as being
the full gettext implementation by the configure script
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Note that -lpthread is no longer needed for -lintl, but axel uses
pthread directly anyway, so we have to keep -lpthread as part of
LDFLAGS.
Finally, we now use BR2_SYSTEM_ENABLE_NLS to decide whether NLS
support should be enabled or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The build system use PKG_CHECK_MODULES.
checking pkg-config is at least version 0.9.0... ./configure: line 16886: output/host/usr/bin/pkg-config: No such file or directory
no
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfs is now capable of generating rootfs images. Use mkfs instead of
genext2fs.
If not set, we now let mkfs calculate the block size and the number of
inodes needed.
This change also adjusts the options to meet those of mkfs.
Notes:
* Passing a null inode number to mkfs triggers its automatic calculation.
* Passing a fs-size with no unit suffix to mkfs is interpreted as using
1K block size.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: don't pass PATH when calling mkfs.ext, just call it directly
from $(HOST_DIR)/usr/sbin, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Soon, the ext{2,3,4} rootfs image will no longer be generated with
genext2fs, but using mke2fs instead which has no support for the extra
inode number option.
So, deprecate the BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES option and
recommend, in lieu, to set the total inode number, taking account of
the extra ones if needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the stdout and stderr streams are redirected, it is not
immediately obvious when a build failed, even though brmake really exits
with the same error code as make did.
When there is an error, print the exit code after the elapsed time.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ifupdown scripts can be used independently of the init system, be it
sysv, busybox or systemd; they could even be used when there is no init
system (i.e. the user is providing his own).
Currently, those ifupdown scripts are bundled in the skeleton.
But we soon will have a skeleton specific to systemd, so we would be
missing those scripts (when systemd-networkd is not enabled).
So, move those scripts to their own package.
To keep the current behaviour (before it is changed in future commits),
we make that package default to y, but depend on the default skeleton.
Instead of being a target-finalize hook, the scripts are installed as
any other package are, with a package install-target command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop empty IFUPDOWN_SCRIPTS_SOURCE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we had no support for full NLS with the musl C library:
BR2_NEEDS_GETTEXT was only true for uClibc. But the musl C library
provides a stub gettext implementation, which some packages were
failing to recognize as being usable, and therefore we are passing
autoconf cache variables to hint those packages that yes, the C
library has a usable gettext implementation.
However, we are going to enable full NLS support for musl, by giving
the possibility to build gettext libintl with musl. In such a case, we
do not want packages to use the gettext implementation of the C
library, but really the one provided by gettext libintl.
Therefore, we should only pre-seed the
gt_cv_func_gnugettext1_libc*=yes variables if we're on musl but
without gettext libintl. Otherwise packages will fail building because:
- libintl.h is the one from the full-blown gettext implementation, so
it assumes the package will link against -lintl
- the package thinks gettext is provided by the C library, so it
doesn't link with -lintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All packages that can use NLS support will have to depend on
host-gettext, as it provides the tools for generating .mo files from
.po files.
In addition, all packages may need to depend on gettext (and link with
-lintl) if the full-blown gettext implementation is provided by
libintl and not by the C library.
In order to avoid repeating such conditions everywhere, this commit
introduces two variables:
- TARGET_NLS_DEPENDENCIES, which packages that may use NLS support
should unconditionally add to their <pkg>_DEPENDENCIES variable.
- TARGET_NLS_LIBS, which packages can use to pass through LIBS or
LDFLAGS when the package build system needs help to realize that it
should link against libintl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the option BR2_ENABLE_LOCALE was more-or-less controlling
whether NLS support was enabled in packages. More precisely, if
BR2_ENABLE_LOCALE=y, we were not doing anything (so some packages
could have NLS support enabled, some not). And only when
BR2_ENABLE_LOCALE was disabled we were explicitly passing
--disable-nls to packages.
This doesn't make much sense, and there is no reason to tie NLS
support to locale support. You may want locale support, but not
necessarily NLS support. Therefore, this commit introduces
BR2_SYSTEM_ENABLE_NLS, which allows to enable/disable NLS support
globally. When this option is enabled, we pass --enable-nls to
packages, otherwise we pass --disable-nls.
In addition, when this option is enabled and the C library doesn't
provide a full-blown implementation of gettext, we select the gettext
package, which will provide the full blown implementation.
It is worth mentioning that this commit has a visible impact for users:
- Prior to this commit, as soon as BR2_ENABLE_LOCALE=y, packages
*could* provide NLS support. It was up to each package to decide
whether they wanted to provide NLS support or not (we were not
passing --enable-nls nor --disable-nls).
- After this commit, it's BR2_SYSTEM_ENABLE_NLS that controls whether
NLS is enabled or disabled, and this option is disabled by default.
Bottom line: with the default of BR2_SYSTEM_ENABLE_NLS disabled, some
packages may lose NLS support that they used to provide. But we
believe it's a reasonable default behavior for Buildroot, where
generally NLS support is not necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to use DISABLE_NLS not only for disabling NLS support,
but also to explicitly enable it. Therefore, this preparatory commit
renames it to NLS_OPTS, which is consistent with other foo_OPTS
variables defined in package/Makefile.in.
While at it, we replace the := assignments by regular = assignments.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces a hidden option
BR2_PACKAGE_GETTEXT_PROVIDES_INTL that is used by gettext.mk to force
the build of libintl if the toolchain doesn't provide a full gettext
implementation.
For now, this hidden option is not selected by anything, but a
follow-up commit will introduce BR2_ENABLE_NLS, which will make use of
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new boolean is true if the toolchain provides a built-in
full-featured implementation of gettext (glibc), and false if only a
stub implementation is provided (uclibc, musl).
This will be used in follow-up commits to decide whether libintl needs
to be built by gettext or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to avoid having to bring libintl from gettext whenever you
want to build a program that needs it, uClibc-ng now provides a stub
implementation of the gettext functions in uClibc-ng itself. This
brings uClibc-ng in the same situation as musl.
This will fix a lot of build failures related to static linking with
libintl, and generally is a first step to simplify our gettext
handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ushare is not an autoconf/automake based package, so it does not have
the standard behavior of autoconf that every enable/disable option
supports both --enable-foo and --disable-foo.
For example, it supports --disable-nls, but not
--enable-nls. Currently, DISABLE_NLS is either empty or --disable-nls,
but this will be changed in a follow-up commit. As a preparation, this
commit modifies ushare to no longer use DISABLE_NLS, but instead
calculate itself whether --disable-nls should be passed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to pass --enable-nls to all autotools packages when NLS
support is enabled globally. However, lvm2 NLS support doesn't build,
and anyway lvm2 doesn't provide any useful translation files, so we
force disable NLS support for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment that explains why we were defining HOST_FLEX_DEPENDENCIES
instead of inheriting from FLEX_DEPENDENCIES no longer makes sense,
since we remove such automatic inheritance of host dependencies from
target dependencies a while ago.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, libglib enables some fairly aggressive warnings, treated
as errors. In particular, the -Wformat=2 warning triggers a warning
due to the return value of the ngettext() macro from uClibc libintl
stub not being understood as being potentially a format string.
So, before we enable the stub libintl in uClibc, we disable such
warnings. A bug will be reported to upstream uClibc to get the actual
bug fixed, but disabling compiler warnings treated as errors is anyway
a good thing in the context of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size parameter from sock_recvmsg() was removed from Linux kernel
API since 4.7. This commit adjusts the existing
0004-Port-one-one_udp.c-to-Linux-4.1.patch to fix the build with Linux
>= 4.7.
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
[Thomas: improved commit title/log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file "qt.conf" can be used to override the hard-coded paths that are
compiled into the Qt library. We need it to make "qmake" relocatable.
CC: Julien Corjon <corjon.j@ecagroup.com>
CC: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- use | instead of \ as sed separator, suggested by Arnout.
- fix indentation, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It will install the script "relocate-sdk.sh" in the HOST_DIR
allowing to adjust the path to the SDK directory in all text
files after it has been moved to a new location.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- Fix shebang to be /bin/sh instead of /bin/bash, suggested by Arnout
- Use | instead of \ as a separator for sed expressions, suggested by
Arnout, discussed with Wolfgang and others
- Remove ./ at the beginning of LOCFILE, suggested by Arnout
- Fix comment about the path check being made before doing the
replacement, suggested by Arnout
- Fix indentation, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-8372 - The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to cause a
denial of service (assertion failure and application exit) via a crafted
audio file.
CVE-2017-8373 - The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted audio file.
CVE-2017-8374 - The mad_bit_skip function in bit.c in Underbit MAD libmad
0.15.1b allows remote attackers to cause a denial of service (heap-based
buffer over-read and application crash) via a crafted audio file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove non-existant configure options:
--disable-sphinx-doc:
Even if it looks like there is some code for that in configure.ac, it
seems that is not taken into account and that configure option is not
even recognized.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dtls plugin needs openssl, so move it down to the "plugins with external
dependencies" section to match the rest of the plugins.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove non-existant or unnecessary configure options:
--disable-oggtest, --disable-vorbistest:
It looks like these options will be taken into account by ogg.m4 and
vorbis.m4 only when ogg and vobis are enabled. However, according to
the code on those m4 files these two options are disabled by default.
--disable-gio_unix_2_0:
I don't know where this option comes from.
--disable-freetypetest:
183610c035
[Peter: add rawparse plugin]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the WebRTC plugin option was introduced in commit
ee267886bc ("gst1-plugins-bad: enable
webrtc plugin"), it was incorrect added as "webrtc", while the actual
name of the plugin and corresponding configure option is "webrtcdsp".
This commit therefore fixes the .mk file to use the correct name. And
also, since we want to keep Buildroot option consistent with the name
of the GStreamer plugins, it renames the Config.in option as well, and
introduces the necessary Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though no timezone implicitly means UTC, systemd is not all that
happy when it does not have a timezone set. This is all fine on a RW
filesystem because systemd will create a symlink on its own (to
Etc/UTC), but not so much on a RO filesystem, causing all kind of
issues at boot time (up to the point that the system is unusable).
We fix that by requiring that the timezone is actually set. The check is
done by verifying that the timezone file is an actual file; if not set,
the test would find a directory and would thus fail.
Update the help entry accordingly.
Also fix indentation in tzdata.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Martin Bark <martin@barkynet.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ext filesystems can use a block size of 1024, 2048, or 4096 bytes, the
former being interesting to store small files, while the latter being
more intersting to store bigger files.
So far, we were using the default, which was to use a 1024-byte block.
Continue doing so (for now...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous default, zero, just meant "use the default value of the
filesystem generator", which happened to be 5% (the traditional value
for all ext-creating tools we've ever seen).
So, change the new default accordingly to 5%.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, leaving the number of inodes to be autocalculated requires
the user to not specify the -i option at all.
Also accept zero as meaning auto; this will help simplify the ext2.mk
code a little bit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsepol has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . Also, the shared lib symlink is forced to ../../lib
(i.e. assumes it's installed under /usr). For these reasons, the host
build and install commands are a bit unusual: they use DESTDIR instead
of PREFIX, DESTDIR points to $(HOST_DIR) without /usr, and some
additional fixup is needed to correct the installation directory of
libsepol.so.1 and the symlink to it.
This can be simplified quite a lot by passing both DESTDIR and PREFIX,
and including the /usr part in both. The symlink still has to be fixed,
but that's much simpler.
Note that a side effect is that the man pages are now installed under
$(HOST_DIR)/usr/usr/man. While not very nice, we don't really care
about man pages. In addition, this will resolve itself when we later
move $(HOST_DIR)/usr to $(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes $(1)/$($(PKG)_ERLANG_LIBDIR) is used, sometimes
$(1)$($(PKG)_ERLANG_LIBDIR). Make this consistent, with /. Therefore,
remove the leading / from $($(PKG)_ERLANG_LIBDIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The individual binaries option of busybox allows for the applets
that would usually be symlinks to be built as individual applications
that link against a shared library.
This feature is needed for SELinux to allow the applications to run
under the correct SELinux context.
The patch being added allows the individual applications to be
installed and will be upstreamed to the busybox developers.
The initial work for this change was done by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- add help text in Config.in option.
- rename BUSYBOX_CONFIGURE_INDIVIDUAL_BINARIES to
BUSYBOX_SET_INDIVIDUAL_BINARIES to be consistent with other
variables.
- call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in
BUSYBOX_INSTALL_TARGET_CMDS, not in BUSYBOX_INSTALL_INIT_SYSV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- revert to the "optional file" approach in makedevs;
- reword Config.in comment text to match our usual pattern;
- abbreviate comment about how suid applets are found a little;
- all applets are optional (each one may have been unselected from the
busybox config).]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: remove /usr/share/udhcpc/default.script from BUSYBOX_PERMISSIONS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The utils provided by this package were formerly packaged with libva.
Libva contained a patch not to compile mpeg2vldemo to reduce
dependencies by avoiding C++, this patch is not moved to this package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pngquant's homegrown configure script doesn't understand CC with a
space, so we can't use ccache with it. Only the host variant is
affected: for the target, we call ccache from the toolchain-wrapper so
it's transparent to the configure script.
This wasn't seen in the autobuilders since they never enable
BR2_CCACHE.
To test, use any configuration and do
make BR2_CCACHE=y host-pngquant
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: Mention that openssl is a runtime dependency,
Add license info as noted by Romain, add gpl-2.0.txt,
Add comment explaining the missing build step,
Use install -t for x509-types files]
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1c6/1c69c77d7b378f6f76790fb5ca0078d0db0c40f8
devmem2 is a single C file that is downloaded as-is, and we patch it.
We also use that file as the license file.
Thus, the file when it is downloaded has a specific hash, but when
saved by legal-info, it has a different hash.
However, we can't store two different hashes for the same _filename_
with different content.
So, we extract the license file as a pre-patch hook, and store it in a
separate file, for which we can now add a hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/e1b/e1b3dee917f5ab3961f3dea006720431444d0ef5/
cache-calibrator is a single C file that is downloaded as-is, and we
patch it. We also use that file as the license file.
Thus, the file when it is downloaded has a specific hash, but when
saved by legal-info, it has a different hash.
However, we can't store two different hashes for the same _filename_
with different content.
So, we extract the license file as a pre-patch hook, and store it in a
separate file, for which we can now add a hash.
[Peter: add autobuilder reference]
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
- Avoid memset(NULL, 0, 0) to calm down the paranoid.
- Fix bug 252, invalid read of size 1 in ID3v2 parser due to forgotten
offset from the frame flag bytes (unnoticed in practice for a long time).
Fuzzers are in the house again. This one got CVE-2017-10683.
https://sourceforge.net/p/mpg123/bugs/252/
- Avoid a mostly harmless conditional jump depending on uninitialised
fr->lay in compute_bpf() (mpg123_position()) when track is not ready yet.
- Fix undefined shifts on signed long mask in layer3.c (worked in practice,
never right in theory). Code might be a bit faster now, even. Thanks to
Agostino Sarubbo for reporting.
dlopen() is now directly used to load output modules (and the
--with-modules-suffix option has been removed), so adjust the modules logic
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
avcodec 2.2.x, as used in VideoLAN VLC media player 2.2.7-x before
2017-06-29, allows out-of-bounds heap memory write due to calling memcpy()
with a wrong size, leading to a denial of service (application crash) or
possibly code execution.
https://trac.videolan.org/vlc/ticket/18467
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpwquality adds cracklib to its _DEPENDENCIES, but forgot to select it in
Config.in, leading to build failures if cracklib isn't explicitly enabled:
Makefile:536: *** cracklib is in the dependency chain of libpwquality that
has added it to its _DEPENDENCIES variable without selecting it or depending
on it from Config.in. Stop.
No autobuilder references as this error happens before build-time.log is
written, causing the autobuilder to ignore the build result.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will help catch a change of license even if the filename does
not change.
For now, a missing hash for the license files is not a fatal error, to
let people catch up and add them. When we switch to make it mandatory,
we can simplify the code by just removing the case statement.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the per-package legal-info is mostly silent, but we're soon
to add a check for the hashes of the license files.
In that case, and when there is a hash mis-match, we want a user to know
what package had a changed license file.
So, we add a call to MESSAGE to display the package we're currently
saving the legal-info of, like so:
>>> busybox 1.26.2 Collecting legal info
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we check that the filenames in hash lists do not contain
a slash '/' character, because all we are checking so far are the
downloaded archives, and we explicitly need the filename to not contain
a directory component at all.
However, we're soon to also check the hashes of the license files in
packages sources, and those license files may be at any arbitrary
directory-depth in the packages source tree.
[Peter: Remove reference to files with same basename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using -ef to check for the same file is nicer than relying on a magic
symlink-to-fakedate.
Notice that -ef isn't stricly posix (but supported by bash/dash/zsh), so
I've changed the shebang to /bin/bash.
While we are at it, restructure the logic to do a single exec at the end
instead of handling the epoch/!epoch cases differently for simplicity.
With that out of the way we can directly install it as $HOST/usr/bin/date
instead of the fakedate / date symlink.
[Peter: drop IFS=: change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to error out instead of running menuconfig when no .config
is available broke an existing use case:
make O=output-foo; cd output-foo; br-init-conf (or similar to get a sensible .config); make
As there is no wrapper makefile in output-foo.
Fix it by ensuring the wrapper gets created if needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, cut prints the entire line if the specified delimiter is not
present at all:
$ printf "foo bar" | cut -d' ' -f2
bar
$ printf "foobar" | cut -d' ' -f2
foobar
In setlocalversion, cut is presented with the output of 'hg id' which has
the format:
"<revision> <tags-if-any>"
If the current revision is not tagged, the output of 'hg id' does not
contain the delimiter (space), cut prints the entire string, and
setlocalversion thinks the version is the tag.
As setlocalversion does not print anything for tagged versions, there is no
output overall, and no correct indication of the mercurial revision.
Fix by passing the extra cut option '--only-delimited', which suppresses
output if no delimiter is found.
This problem likely went unnoticed for so long, because the tag 'tip' (i.e.
most recent revision of the branch) is treated specially: in this case the
mercurial revision _is_ printed, i.e. the situation is treated as
'untagged'.
The problem is only seen when you are _not_ at the most recent revision in
your branch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the Qt virtualkeyboard package.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Thomas:
- use SDPX license codes
- add entry to DEVELOPERS file
- drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED logic, since we removed this option
- select BR2_PACKAGE_QT5DECLARATIVE and
BR2_PACKAGE_QT5DECLARATIVE_QUICK instead of using a "depends on"
and propagate the appropriate dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0001-tools-make_rel_symlink.py-can-also-use-python2.patch. Build requires
host-python3 since the previous version bump.
Drop upstream 0002-lircd-Remove-use-of-functions-killed-in-kernel-4.8.0.patch.
Add a patch fixing header guard macro collision with musl libc.
Set HAVE_WORKING_POLL to skip poll(2) run test that is not compatible with
cross compilation.
Add optional dependency on libftdi1.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches downloaded from Github are not stable, so bring them in the
tree.
For this package, the patch is not replaced 1:1 with what Github was
providing. Indeed, the URL
4740f3341a.patch
no longer exists. This pull request has been merged, so we instead use
the real upstream commits. However, the upstream developer apparently
messed up, and applied the change in two separate commits, which is
why one patch fetched from Github is replaced by this commit by two
patches in package/sngrep/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the manual about hashes, fixing a number of
issues:
- Adding the .hash file should no longer be optional: it *must* be
added. Therefore the wording "You can add ..." is changed to "When
possible, you must add ...".
- We are now checking hashes for Git downloaded packages, so fix this
as well, and indicate more clearly which download methods have hash
checking.
- We no longer want to have auto-generated patches be downloaded
through <pkg>_PATCH because such patches are not stable over time,
and their hash can change. For example, downloading patches from
github.com should no longer be done.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the JSON1 SQLite extensions. This extension allows SQLite to
store and query JSON objects in a database.
Signed-off-by: Bradford Barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3142: An error in TSIG authentication can permit unauthorized zone
transfers
An attacker who is able to send and receive messages to an authoritative DNS
server and who has knowledge of a valid TSIG key name may be able to
circumvent TSIG authentication of AXFR requests via a carefully constructed
request packet. A server that relies solely on TSIG keys for protection with
no other ACL protection could be manipulated into:
* providing an AXFR of a zone to an unauthorized recipient
* accepting bogus NOTIFY packets
https://kb.isc.org/article/AA-01504/74/CVE-2017-3142
CVE-2017-3041: An error in TSIG authentication can permit unauthorized dynamic
updates
An attacker who is able to send and receive messages to an authoritative DNS
server and who has knowledge of a valid TSIG key name for the zone and service
being targeted may be able to manipulate BIND into accepting an unauthorized
dynamic update.
https://kb.isc.org/article/AA-01503/74/CVE-2017-3143
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For Gitlab-CI, we want to avoid re-generating the minimal install to
be able to run tests all the time. So let's create a docker image that
we can post on Docker Hub and then pull.
For the time being, this is just what we need for running our CI. Later
we can produce something that is also useful for users.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves our .gitlab-ci.yml logic to execute our runtime
tests located in support/testing/. To do so, this commit:
- Adds more Debian packages to be installed, namely the nose2 and
pexpect packages needed by the runtime testing infrastructure, as
well as the necessary Qemu emulators
- The description of how to run the runtime tests. Each test is
executed as a separate Gitlab CI job, so that the status of each
test is easily visible in the Gitlab CI web interface.
- The Makefile is improved to auto-generate .gitlab-ci.yml from
.gitlab-ci.yml.in, like we're doing for defconfigs. Since the
dependencies of .gitlab-ci.yml are no longer correct, we abandon
them and instead make it a PHONY target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: simplify .gitlab-ci.in a little, removing redundant stuff;
make .gitlab-ci.yml a PHONY target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If $(BR2_PACKAGE_HAS_HOST_FOO) is defined, then the pkg-virtual
infrastructure will check if $(BR2_PACKAGE_PROVIDES_HOST_FOO) is not
empty.
But later, $(BR2_PACKAGE_HOST_FOO_DEPENDENCIES) will be set from
$(BR2_PACKAGE_PROVIDES_FOO), ignoring $(BR2_PACKAGE_PROVIDES_HOST_FOO).
So fix this discrepancy by setting $(BR2_PACKAGE_HOST_FOO_DEPENDENCIES)
from $(BR2_PACKAGE_PROVIDES_FOO) only if $(BR2_PACKAGE_PROVIDES_HOST_FOO)
is empty.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add comments suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Despite newer versions being available, this patch creates a package
for version 2017-05-05, because newer version have issues that need to
be addressed.
Still, the projects install target installs the wrong files, so custom
commands are needed for staging_install and target_install.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"$ORIGIN/../../usr/lib" is also a valid RPATH for binaries in
"$hostdir/usr/bin". After RPATH sanitation, all RPATH
directories start with "$ORIGIN".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of the Atmel defconfigs to linux4sam_5.6 in commit
0f7b5d4a9f, the new U-Boot version uses
the Device Tree compiler, so we need to add BR2_TARGET_UBOOT_NEEDS_DTC
in order to build dtc before u-boot and avoid build failures.
Fixes:
>>> uboot linux4sam_5.6 Configuring
>>> uboot linux4sam_5.6 Building
[...]
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit e51d69a3b (mosquitto: specify that hash is taken from upstream)
changed the .hash description header, but the upstream hash only applies
to the tarball, not the patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a major release, but the API seems to be mostly
backwards-compatible. The only package depending on this library in
buildroot is libsigrok and it builds fine.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patches are now upstream and can be removed. Remove the comment
about Qt4 - it's no longer valid. Add boost-serialization to
dependencies.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems the ! is removed by the yaml parser, so it needs to be quoted.
While we're at it, add some explanatory comment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest release fixed dlmopen detection, so that
musl/uClibc-ng toolchains can be used.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When getdeveloperlib.parse_developers doesn't find anything, the script
tries sys.exit(1) but sys is not imported.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-DEVELOPERS test would always fail, because && will return
the exit code of the left-hand side if not 0, so it *always* returns
1.
But in fact, the test can be simplified quite a lot: we can run
getdeveloper directly, without arguments. That should just print
'No action specified', but it will also print any syntax errors it
encountered. So we can just 'grep -v' the expected output away; if
there is anything more, grep will return 0, but if there is nothing
more, it will return 1. So we just need to invert the result.
Incidentally, this also fixes the incorrect remaining reference to
support/scripts.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were still some references to the old location of the scripts in
the manual. Replace them by utils/.
While we're at it, remove the redundant ./ at the beginning of some of
the example commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were still references to support/scripts/ for scripts that have
moved to the utils directory. There were also references that were
updated, but not re-updated when the tools moves to utils.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5Multimedia builds the alsa plugin if it detects libasound in the
system. Add alsa-lib to dependencies if BR2_PACKAGE_ALSA_LIB is
selected.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5Multimedia includes support for pulseaudio if it detects libpulse
and libpulse-mainloop-glib in the system at build-time. We need to
depend on pulseaudio and libglib2 if it is selected.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 67117adc89 backed out the
deployment of libmtd headers (libmtd.h, libubi.h, ubi-media.h) to
staging and these may be needed by packages that work directly with MTD,
for example swupdate. mtd also produces libmtd.a and libubi.a which are
needed by those packages.
Tested by configuring swupdate to use MTD and verifying that swupdate
now compiles and links.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas: change to a post-install staging hook, and add comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add brmake, a small script that redirects the build output log to a
file, keeping just Buildroot's own messages, with the date+time added
at the start of the line.
We need to unbuffer the output of make so that, when the script is
interrupted (SIGINT, ^C), there is no lingering output not yet digested
by the logger loop.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running multiple instances of emulator in parallel, the login
prompt can take some time to appear.
Use a large timeout when waiting for the prompt to avoid random
failures.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to pass -t to set the number of testcases to run
simultaneously.
When -j is not specified, calculate it to split the available cores
between the simultaneous testcases.
Example of auto calculated -j for cpu_count 8:
-t -j total
1 9 9
2 4 8
3 3 9
4 2 8
>=5 1 t
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the parameter logfile is passed to spawn(), pexpect sends both
stdin and stdout to the logfile and it creates a double echo effect.
One way to avoid the double echo in the logfile would be to disable the
echo on the terminal just after login ("stty -echo"), but double echo of
user and password would remain.
Instead of that, send only the stdout to the logfile using the
logfile_read property.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of redirecting qemu serial to telnet, redirect it to stdio.
It allows to run testcases in parallel without random failing caused by
two emulators trying to use the same telnet port (1234).
'qemu -serial stdio' returns some extra <CR> characters, so remove them
from the log.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace subprocess + telnetlib with pexpect.
Use the telnet installed on the host machine instead of telnetlib, while
the serial from qemu is not yet redirected to stdio.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This verifies that the DEVELOPERS file doesn't contain errors. It
just runs parse_developers from getdeveloperlib and errors out if
that produces any output.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, we have a choice to select between stripping and not
stripping. This is legacy code from back when we had a third option,
sstrip (super-strip).
Since we removed sstrip, stripping or not stripping is now just a
boolean rather than a choice.
Make it so.
We make BR2_STRIP_strip default to 'y' to keep the current behaviour of
defaulting to stripping.
Move BR2_STIP_none to legacy, and instruct the user to review the new
setting.
Drop any reference to BR2_STRIP_none in comments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, passing STRIP=true is not sufficient to disable striping
altogether, as some (incorrectly generated?) configure scripts will
ignore a ${STRIP} that is not a full path.
This is the case, for example, for nmap, which ends up using the host
strip command when we pass STRIP=true:
checking for arm-buildroot-linux-gnueabihf-strip... no
checking for strip... /usr/bin/strip
configure: WARNING: using cross tools not prefixed with host triplet
[--SNIP--]
/usr/bin/install -c -c -m 755 nping /home/ymorin/dev/buildroot/O/target/usr/bin/nping
/usr/bin/strip -x /home/ymorin/dev/buildroot/O/target/usr/bin/nping
/usr/bin/strip: Unable to recognise the format of the input file `/home/ymorin/dev/buildroot/O/target/usr/bin/nping'
We fix that by forcing a full path to the strip sommand when it is
disabled: STRIP=/bin/true
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RAUC is the Robust Auto-Update Controller developed by the folks at
Pengutronix. It supports updating embedded systems from the network
(ex: HawkBit) or from a disk and provides a d-bus interface.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade the Xen package to Xen 4.9.0. This also means we can remove
almost all of the patches we were previously carrying.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
_mmc on defconfig files in engicam need to drop and same follow on
other engicam defconfig files.
So, this patch rename engicam_imx6ul_isiot_mmc_defconfig to
engicam_imx6ul_isiot_defconfig which is missing in commit "board: Add
support for Engicam Is.IoT MX6UL SOM" (sha1:
0235bc6176)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since forever, we run 'menuconfig' automatically on an unconfigured
tree. However, this does not help users that much:
- If they read the documentation, they should already know to run
make menuconfig first.
- If they haven't read the documentation, dropping them in menuconfig
isn't very helpful.
- It's a likely that the user didn't intend to be in an unconfigured
tree (e.g. wrong O= specified), so starting menuconfig (and polluting
this wrong O= directory) is not very helpful.
- It's possible that the user really doesn't want menuconfig, but
instead needs xconfig, or some defconfig, or ...
So, instead of trying to guess what the user needs, print an error and
let the user decide what to do next.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Alessandro Power on StackOverflow [1], the behaviour
of "make toolchain" in an unconfigured tree is misleading.
When .config doesn't exist, we don't read in the package .mk files, so
"make <package>" doesn't work:
$ make busybox
make: *** No rule to make target 'busybox'. Stop.
However, for "linux" and "toolchain", the corresponding file (or
actually directory) already exists. So instead, we get:
$ make linux
make: Nothing to be done for 'linux'.
This is confusing, because it looks as if the build succeeded.
The obvious solution is to make linux and toolchain PHONY targets when
.config doesn't exist. However, that actually does the reverse, because
then a rule _does_ exist for them and since they don't have
dependencies, make will consider them to be ready.
Therefore, we also have to provide an explicit rule for them, and
explicitly error out. Thise behaviour is still different from other
packages, but at least it is much less confusing.
[1] https://stackoverflow.com/questions/44521150
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As all librt and libpthread functions are integrated into
libc for a while, workaround no longer required.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the bump of gnu-efi from 3.0.5 to 3.0.6, patch 0008 in the
syslinux package is no longer needed. More specifically, it's commit
bf07e8141777e5a2d67ec8447084215224bdad4b in upstream gnu-efi that
fixed the underlying issue.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
[Thomas: add better commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc contains a vulnerability that allows specially crafted LD_LIBRARY_PATH
values to manipulate the heap/stack, causing them to alias, potentially
resulting in arbitrary code execution. Please note that additional
hardening changes have been made to glibc to prevent manipulation of stack
and heap memory but these issues are not directly exploitable, as such they
have not been given a CVE.
https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
Patches are identical to upstream, except that the ChangeLog modifications
have been stripped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-9868: In Mosquitto through 1.4.12, mosquitto.db (aka the
persistence file) is world readable, which allows local users to obtain
sensitive MQTT topic information.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a fix for CVE-2017-9445: In systemd through 233, certain sizes passed to
dns_packet_new in systemd-resolved can cause it to allocate a buffer that's
too small. A malicious DNS server can exploit this via a response with a
specially crafted TCP payload to trick systemd-resolved into allocating a
buffer that's too small, and subsequently write arbitrary data beyond the
end of it.
The other patch fixes an issue with the security fix.
[Peter: use CVE description from MITRE]
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tmpfile support is optional in systemd but the dhcp server install it's
config file in $(TARGET_DIR)/usr/lib/tmpfiles.d directory when systemd
is used as init system.
So it seems that dhcp server require tmpfile support for systemd based
system.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the BR2_CMAKE_CANDIDATES variable, containing a list of candidates
to check and use as BR2_CMAKE, if possible.
This allows using "cmake3" on CentOS 7, whose default cmake corresponds
to version 2.8.12. Example:
$ make BR2_CMAKE_CANDIDATES="cmake cmake3"
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is useful on CentOS 7 whose "cmake" package provides cmake 2.8.12,
which is too old, but the "cmake3" package (from EPEL) provides version
3.6.3, which is satisfactory. Examples:
$ sh support/dependencies/check-host-cmake.sh 2.8 cmake cmake3
/usr/bin/cmake
$ sh support/dependencies/check-host-cmake.sh 3.1 cmake cmake3
/usr/bin/cmake3
$ sh support/dependencies/check-host-cmake.sh 3.8 cmake cmake3
(nothing)
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes a problem where it was not possible to replace
/etc/shadow with a symlink to a e.g. a user partition where the
shadow file is placed. This is required, e.g. for systems where the
rootfs is mounted read-only but users should still be able to be
added. Thus, if within an filesystem overlay setup a user tries
to replace /etc/shadow with a symlink to the real file on a user
partition a buildroot build stops with an error message because
sed is called on the symlink instead of following the symlink.
This commit fixes this shortcoming.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not support uClibc-ng/musl C library version choice support,
do the same for GNU C Library.
No legacy handling required as only version choice is removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: move 3.2 kernel headers dependency to the libc choice in
toolchain/toolchain-buildroot/Config.in file, and added a Config.in
comment about it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam Is.IoT MX6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools/host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create board/engicam/icorem6 for i.CoreM6 supported files.
and update the readme.txt so-that it can list i.CoreM6 board
details.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS
board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A VFAT filesystem is described in the genimage configuration file, so
we need host-dosfstools and host-mtools enabled in the defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forward port 0001-link-against-libintl.patch. Since now autoreconf works, move
the patch from Makefile.in to Makefile.am. Also, convert to git format.
Remove 0002-no-__progname.patch. Buildroot default uClibc and musl now provide
__progname.
Add a patch that adds the git-version-gen script to fix autoreconf.
Remove upstream patch.
Upstream switched to .xz tarballs.
Add upstream provided hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add host-pkgconf to dependencies as we now use PKG_CHECK_MODULES in
configure.ac.
Changelog for v0.3:
New features:
- gpiomon can now watch multiple lines at the same time and supports custom
output formats which can be specified using the --format argument
- testing framework can now test external programs: test cases for gpio-tools
have been added
Improvements:
- improve error messages
- improve README examples
- configure script improvements
Bug fixes:
- use correct UAPI flags when requesting line events
Also includes bug fixes from v0.2.1:
Bug fixes:
- capitalize 'GPIO' in error messages in gpioset, gpioget & gpiomon
- tweak the error message on invalid arguments in gpiofind
- don't ignore superfluous arguments and fix the displayed name for falling
edge events in gpiomon
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two patches are no longer needed with the latest upstream version,
so bump to the latest one.
Tested on imx6.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Add a patch to revert the assumption that ncursesw headers are under
/usr/include/ncursesw/ only. That's necessary to have both versions
for ABI/API compatibility but does not make sense on embedded systems.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
The patch is a bit drastic but it solves the problem of using ncursews
while we discuss a better solution in the util-linux mailing list.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2016-9577
Frediano Ziglio of Red Hat discovered a buffer overflow
vulnerability in the main_channel_alloc_msg_rcv_buf function. An
authenticated attacker can take advantage of this flaw to cause a
denial of service (spice server crash), or possibly, execute
arbitrary code.
CVE-2016-9578
Frediano Ziglio of Red Hat discovered that spice does not properly
validate incoming messages. An attacker able to connect to the
spice server could send crafted messages which would cause the
process to crash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2016-0749: The smartcard interaction in SPICE allows remote attackers to
cause a denial of service (QEMU-KVM process crash) or possibly execute
arbitrary code via vectors related to connecting to a guest VM, which
triggers a heap-based buffer overflow.
CVE-2016-2150: SPICE allows local guest OS users to read from or write to
arbitrary host memory locations via crafted primary surface parameters, a
similar issue to CVE-2015-5261.
The pyparsing check has been dropped from configure, and the spice protocol
definition is again included, so the workarounds can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2015-3247: Race condition in the worker_update_monitors_config function
in SPICE 0.12.4 allows a remote authenticated guest user to cause a denial
of service (heap-based memory corruption and QEMU-KVM crash) or possibly
execute arbitrary code on the host via unspecified vectors.
CVE-2015-5260: Heap-based buffer overflow in SPICE before 0.12.6 allows
guest OS users to cause a denial of service (heap-based memory corruption
and QEMU-KVM crash) or possibly execute arbitrary code on the host via QXL
commands related to the surface_id parameter.
CVE-2015-5261: Heap-based buffer overflow in SPICE before 0.12.6 allows
guest OS users to read and write to arbitrary memory locations on the host
via guest QXL commands related to surface creation.
Client/gui support is gone upstream (moved to spice-gtk / virt-viewer), so
add Config.in.legacy handling for them.
Lz4 is a new optional dependency, so handle it.
The spice protocol definition is no longer included and instead used from
spice-protocol. The build system uses pkg-config --variable=codegendir to
find the build time path of this, which doesn't take our STAGING_DIR prefix
into consideration, so it needs some help. The installed protocol
definition will likewise be newer than the generated files, so we need to
workaround that to ensure they are not regenerated (which needs host python
/ pyparsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tunneling support is gone upstream, so drop the patch and add
Config.in.legacy handling for the option.
Celt051 is no longer a hard dependency, and opus is a new optional
dependency, so adjust the dependencies to match.
Python / pyparsing are not needed as the tarball contains the generated
files (this should presumably have been host-python in the first place as
these are used at build time), but we need a small workaround to convince
configure that they really aren't needed.
Alsa-lib is only needed for client support, and the configure script checks
for X11/Xext/Xrender, so adjust the dependencies to match.
A user manual is now generated by default if asciidoc is available, so
explicitly disable that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of a custom post-build script, use the boot script generation
logic of the U-Boot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
More and more of our defconfigs need to generate a U-Boot boot
script. It's a simple call to mkimage, but we already have 12
instances of this logic in board/, and there are patch series waiting
in patchwork adding 3 more boards that need this.
So let's add an option in the U-Boot package to generate such a boot
script image easily.
Note that we assume a single script needs to be generated, and the
output file name is boot.scr. The only platform for which it seems to
not be the case are the Boundary Devices platforms: they generate two
boot scripts, 6x_bootscript and 6x_upgrade, but they are anyway
installed inside TARGET_DIR, not BINARIES_DIR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0006 is no longer needed as the fix is already upstream.
Confirmed that the colors are displayed correctly when running the
Qt5CinematicDemo application on i.mx6.
Patch 0007 is already applied upstream.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch backports two patches that have been sent upstream as a pull
request in order to fix sshd for MIPS64 n32.
The first patch adds support for detecting the MIPS ABI during the
configure phase.
The second patch sets the right value to seccomp_audit_arch taking into
account the MIPS64 ABI.
Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or
AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built
for MIPS64. However, that's only valid for n64 ABI. The right macros for
n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and
AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.
Because of that an sshd built for MIPS64 n32 rejects connection attempts
and the output of strace reveals that the problem is related to seccomp
audit:
[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++
Pull request: https://github.com/openssh/openssh-portable/pull/71
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for specifying multiple image files in
BR2_TARGET_BAREBOX_IMAGE_FILE config option.
This is useful for boards with several RAM size variants.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: rename internal variable from $(1)_IMAGE_FILE to
$(1)_IMAGE_FILES.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default bootargs have changed in U-Boot for this board. Build U-Boot
environment and add it to the SD card image to update bootargs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
at91sam9x5ek_mmc board was missing in the previous patch adding 1M
offset for FAT partition to solve some boot issues with the ROM code.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream uploaded a new tarball with the same version number 2016-09-08,
some time after the update to v2.0.9 in buildroot. Someone noticed, but
upstream set the ticket to wontfix, and promised to do better in the
future: https://sourceforge.net/p/iperf2/tickets/20/
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-1000381: The c-ares function `ares_parse_naptr_reply()`, which is
used for parsing NAPTR responses, could be triggered to read memory outside
of the given input buffer if the passed in DNS response packet was crafted
in a particular way.
https://c-ares.haxx.se/adv_20170620.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
remove input-tools, it has been obsoleted by linuxconsoletools
linuxconsoletools uses the same name as upstream and carries
the latest version of the tools installed by input-tools.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-3167: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
use of the ap_get_basic_auth_pw() by third-party modules outside of the
authentication phase may lead to authentication requirements being bypassed.
CVE-2017-3169: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_ssl may dereference a NULL pointer when third-party modules call
ap_hook_process_connection() during an HTTP request to an HTTPS port.
CVE-2017-7659: A maliciously constructed HTTP/2 request could cause
mod_http2 to dereference a NULL pointer and crash the server process.
CVE-2017-7668: The HTTP strict parsing changes added in Apache httpd 2.2.32
and 2.4.24 introduced a bug in token list parsing, which allows
ap_find_token() to search past the end of its input string. By maliciously
crafting a sequence of request headers, an attacker may be able to cause a
segmentation fault, or to force ap_find_token() to return an incorrect
value.
CVE-2017-7679: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_mime can read one byte past the end of a buffer when sending a malicious
Content-Type response header.
While we're at it, use the upstream sha256 checksum instead of sha1.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3140 is a denial-of-service vulnerability affecting 9.9.10,
9.10.5, 9.11.0->9.11.1, 9.9.10-S1, and 9.10.5-S1 when configured with
Response Policy Zones (RPZ) utilizing NSIP or NSDNAME rules.
https://kb.isc.org/article/AA-01495/74/CVE-2017-3140
CVE-2017-3141 is a Windows privilege escalation vector affecting
9.2.6-P2+, 9.3.2-P1+, 9.4.x, 9.5.x, 9.6.x, 9.7.x, 9.8.x, 9.9.0->9.9.10,
9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, and 9.10.5-S1. The
BIND Windows installer failed to properly quote the service paths,
possibly allowing a local user to achieve privilege escalation, if
allowed by file system permissions.
https://kb.isc.org/article/AA-01496/74/CVE-2017-3141
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway supports many different transports, and currently there
is no implicit way to turn them off or on. Instead, if the dependency
happens to be built, then the transport is enabled.
Create a transports section in the config file and add
BR2_PACKAGE_JANUS_REST as the first transport.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: propagate thread dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Such a construct allows to bail out if the installation of one of the
program fails, which the current shell-based for loop doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This revision includes:
- Moving from a handwritten makefile to autotools.
- Restructuring and cleaning up the source tree.
- Fixing the problems that the patches in the package/mtd directory fixed.
Changes:
- Move from generic-package to autotools-package in mtd.mk.
- Remove no longer necessary patches.
- Update binary locations in mtd.mk
- Update library/header locations in mtd.mk
- Remove MTD_ADD_MISSING_LINTL definition from mtd.mk, as it's no longer
needed.
Tested with toolchains compiled with musl, uclibc, and glibc.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: additional improvements
- introduce hidden options BR2_PACKAGE_MTD_JFFS_UTILS,
BR2_PACKAGE_MTD_UBIFS_UTILS and BR2_PACKAGE_MTD_TESTS that match the
./configure options of mtd. Those hidden options select the
appropriate dependencies checked by the configure script, and are
selected by the existing per-tool Config.in options.
- .mk file is changed to handle properly the new hidden options
BR2_PACKAGE_MTD_JFFS_UTILS, BR2_PACKAGE_MTD_UBIFS_UTILS and
BR2_PACKAGE_MTD_TESTS.
- .mk file is changed to properly handle BR2_PACKAGE_ACL, by passing
--with-xattr/--without-xattr.
- remove HOST_MTD_BUILD_CMDS and HOST_MTD_INSTALL_CMDS, those are no
longer needed since we have an autotools-package now.
- MTD_STAGING_y and MTD_INSTALL_STAGING_CMDS are removed, we use the
default staging installation commands, that install everything that
is needed.
- the MTD_TARGETS_UBI_y variable is merged into MTD_TARGETS_y, as we no
longer need to distinguish both.
- integck installation logic is moved into MTD_TARGETS_y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In buildroot ffmpeg uses x264 as optional dependency if
BR2_PACKAGE_FFMPEG_GPL is enabled at the same time.
If BR2_PACKAGE_FFMPEG_GPL is disabled and ffmpeg is built without x264
support before x264 itself is build, x264 picks up certain ffmpeg libs
as optional dependency leading to build errors because x264 does not
correctly link statically against ffmpeg.
To avoid a circular dependency and to avoid teaching x264 how to
correctly link statically with ffmpeg we just disable all ffmpeg-
related options.
Fixes
http://autobuild.buildroot.net/results/36a/36abb5b8f3aab57fb7b63056b216b4a58143ee3e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to check whether librt is required for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
The following patches are not renumbered. The noise is too high.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CodeSourcery x86 and sh, the ADI Blackfin, and the Xilinx Mircoblaze
external toolchain profiles have all been removed. Update the manual.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery sh toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery x86 toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix following error:
| ../../libtirpc-1.0.1/src/xdr_sizeof.c:93:13: error: 'uintptr_t' undeclared (first use in this function); did you mean '__intptr_t'?
| if (len < (uintptr_t)xdrs->x_base) {
| ^~~~~~~~~
This error occurs with the latest glibc master version (during the testing I had
glibc commit 92bd70fb85bce57ac47ba5d8af008736832c955a), but doesn't occur with
version 2.25.
Patch includes stdint.h to provide uintptr_t.
It has been submitted upstream:
https://sourceforge.net/p/libtirpc/mailman/message/35850276/
Signed-off-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com>
[Thomas: reformat as Git formatted patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot and linux kernel are too old to build with gcc 6.
Fit it by backporting the following commits:
- u-boot: 9b2c282b34 (compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6)
- linux: cb984d101b (compiler-gcc: integrate the various compiler-gcc[345].h files)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a kernel module and utilities in order to use
v4l2loopback virtual devices. This module allows you to create
"virtual video devices" normal (v4l2) applications will read these
devices as if they were ordinary video devices, but the video will not
be read from e.g. a capture card but instead it is generated by
another application.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We already have an option for selecting sntp support in ntp that can be
chosen from the menuconfig, and ntp's configure script has a --with-sntp
option (with its --without counterpart) which can be used for disabling
sntp support in ntp. However, we are not using it. This patch will make
use of it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure option --with-ncurses has been removed in version 1.0.0
and thus is no longer needed.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-9468 - Joseph Bisch discovered that Irssi does not properly handle
DCC messages without source nick/host. A malicious IRC server can take
advantage of this flaw to cause Irssi to crash, resulting in a denial of
service.
CVE-2017-9469 - Joseph Bisch discovered that Irssi does not properly handle
receiving incorrectly quoted DCC files. A remote attacker can take
advantage of this flaw to cause Irssi to crash, resulting in a denial of
service.
See https://irssi.org/security/irssi_sa_2017_06.txt for more details.
Remove 0001-Get-back-to-using-pkg-config-to-check-for-OpenSSL.patch as it
applied upstream and drop autoreconf as configure.ac is no longer patched.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
- CVE-2017-9233 - External entity infinite loop DoS. See:
https://libexpat.github.io/doc/cve-2017-9233/
- CVE-2016-9063 -- Detect integer overflow
And further more:
- Fix regression from fix to CVE-2016-0718 cutting off longer tag names.
- Extend fix for CVE-2016-5300 (use getrandom() if available).
- Extend fix for CVE-2012-0876 (Change hash algorithm to William Ahern's
version of SipHash).
Also add an upstream patch to fix detection of getrandom().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently building full gdb for MIPS musl fails because it's trying to
include <sgidefs.h> which is provided by glibc and uClibc, but not by
musl.
However, the kernel headers provide <asm/sgidefs.h> which has the same
definitions, so we can use that one instead.
Backporting a patch that has been sent upstream. Taken from here:
https://sourceware.org/bugzilla/show_bug.cgi?id=21070
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linuxconsoletools contains the inputattach utility
to attach legacy serial devices to the Linux kernel
input layer and joystick utilities to calibrate and
test joysticks and joypads.
The buildroot package adds options to build only certain
tools.
website: http://sf.net/projects/linuxconsole/
Signed-off-by: Koen Martens <gmc@sonologic.nl>
[Thomas: minor tweaks to Config.in and .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 28d97609b2 ("configs/qemu:
bump to the latest kernel version") updated most qemu defconfigs to
use Linux 4.11. However, for the SH4 configurations, Linux 4.9 was
kept, because 4.11 apparently has an issue.
Unfortunately, while the defconfigs for SH4 were unchanged, the Linux
kernel configuration file was renamed from linux-4.9.config to
linux-4.11.config.
This commit renames the Linux configuration files back to their
previous name, linux-4.9.config, matching what the Qemu SH4 defconfigs
specify.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kvazaar is an open-source HEVC encoder licensed under LGPLv2.1.
This provides tools to encode raw video into HEVC stream.
website: http://ultravideo.cs.tut.fi/
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
[Thomas: add --without-cryptopp to explicitly disable support for this
optional dependency, use SPDX license code, fix Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Remove patch already applied upstream.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tool was hosted at fedorahosted.org which was shut down in early
2017. According to a private conversation with the upstream maintainer,
the new home for this tool is on infradead.org so far. So the SITE was
adapted accordingly.
Additionally the version was bumped from 1.4 to current master. This
allows to drop one build patch. The other patches were recreated with
Git.
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.
Fix the build by bumping u-boot to 2017.05.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The board has an ethernet interface, so enable DHCP for it.
The used flash chip uses 16K erase blocks, so use that for JFFS2:
mtdinfo -a
..
mtd5
Name: user
Type: nand
Eraseblock size: 16384 bytes, 16.0 KiB
Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB)
Minimum input/output unit size: 512 bytes
Sub-page size: 256 bytes
OOB size: 16 bytes
Character device major/minor: 90:10
Bad blocks are allowed: true
Device is writable: true
While we're at it, add a readme explaining how to build and upload the build
to the board.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.
Fix the build by bumping the kernel to 4.11.5.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARM_TRUSTED_FIRMWARE_MAKE_TARGET is expanded, but it's never assigned
so it is always empty. On the other hand the make targets are defined
in ARM_TRUSTED_FIRMWARE_MAKE_OPTS, which should contain options, not
targets.
Clean it all up by moving the targets in the proper place, replacing
the useless $(ARM_TRUSTED_FIRMWARE_MAKE_TARGET).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Running glmark2 on imx6 with kernel 4.11.4 and Mesa 17.1.2 leads to
a segmentation fault.
Apply Lucas Stach's patch to fix the problem while upstream glmark2
doesn't get fixed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent setuptools versions require bootstrap.py to be invoked
before the standard setup process. So create such pre configure
hooks for both host and target versions.
Change download location to GitHub because setuptools doesn't
provide *.tar.gz any longer.
Fix legal info. setuptools is now licensed under MIT licence.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZC706 defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq MicroZed defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the variable a little
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.
Instead use a custom linux config for the pc defconfigs. With this, we also
can get rid of the fragment file containing the delta fra the qemu config.
Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b2
(configs/qemu: bump to the latest kernel version), breaking the build.
Fix it by also moving them to linux-4.11.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HTTPS works better behind certain corporate firewalls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a small patch to gdb that fixes the build of gdbserver
on m68k/coldfire:
../nat/linux-ptrace.c: In function 'linux_fork_to_function':
../nat/linux-ptrace.c:282:19: warning: implicit declaration of function 'clone' [-Wimplicit-function-declaration]
child_pid = clone (function, child_stack + STACK_SIZE,
^
../nat/linux-ptrace.c:283:5: error: 'CLONE_VM' undeclared (first use in this function)
CLONE_VM | SIGCHLD, child_stack + STACK_SIZE * 2);
^
../nat/linux-ptrace.c:283:5: note: each undeclared identifier is reported only once for each function it appears in
Thanks to Waldemar for pointing out the patch fixing this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gdbserver's code looks at both UCLIBC_USE_MMU *and* UCLIBC_HAS_MMU to
decide whether to enable the no-MMU code. So far, on noMMU platforms,
UCLIBC_HAS_MMU was still set to 'y'. This commit adjusts this, which is
a step forward in getting gdbserver to build on m68k/coldfire.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
Building a toolchain for SuperH/musl works, but the toolchain generate
bogus binaries, because the path to the program interpreter is not
known (and therefore is /dev/null).
This commit backports a patch from gcc 6.x to make SuperH support with
musl work properly.
The patch is not needed in gcc >= 6.x because the musl support is
upstream. The patch is not needed for gcc 4.9 because we had a
different musl support patch that had support for all architectures in
one patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
This commit small patches to gdb that fix redefined structures build
problems that occur when building on PowerPC, PowerPC64, PowerPC64le and
SuperH with the musl C library.
The PowerPC(64)(le) patch was taken from the Yocto Project, the SuperH
patch was inspired from the PowerPC patch. The issue has also been
reported upstream to the musl developers:
http://www.openwall.com/lists/musl/2017/06/03/1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Neither gdb nor gdbserver have support for ARM noMMU and OpenRISC, so
let's disable gdb on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- Fixed BR2_openrisc to BR2_or1k in Config.in.host
Changes since v1:
- Fixed BR2_openrisc to BR2_or1k
Before adding more architecture dependencies to gdb, let's introduce a
BR2_PACKAGE_GDB_ARCH_SUPPORTS, to avoid duplicating this list of
dependencies between the Config.in comment and the main Config.in
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Like for freetype-config, override libpng-config path otherwise
the one from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
configure:7480: checking for libpng-config
configure:7498: found /usr/bin/libpng-config
configure:7510: result: /usr/bin/libpng-config
configure:7529: checking whether libpng is present and sane
[...]
nios2-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/libpng12'
Fixes
http://autobuild.buildroot.net/results/b68/b68f54404a7d412d639ebb6d052412eea6ee3bf1/lcdproc-0.5.7/config.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If util-linux is not installed system-wide on the host, the build
fails with:
/usr/bin/gcc -Wp,-MT,isohybrid.o,-MMD,./.isohybrid.o.d -O2 -I/home/thomas/projets/buildroot/output/host/usr/include -W -Wall -Wstrict-prototypes -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64 -I/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils -c -o isohybrid.o /home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c
/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c:40:23: fatal error: uuid/uuid.h: No such file or directory
#include <uuid/uuid.h>
^
compilation terminated.
Therefore, this commit adds a dependency on host-util-linux, which
will ensure that libuuid is available. The resulting isohybrid tool is
really installed, and linked with libuuid:
$ readelf -d output/host/usr/bin/isohybrid
Dynamic section at offset 0x3e00 contains 26 entries:
Tag Type Name/Value
0x0000000000000001 (NEEDED) Shared library: [libuuid.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
0x000000000000000f (RPATH) Library rpath: [/home/thomas/projets/buildroot/output/host/usr/lib]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying setup type to be 'distutils' results in this package being
installed as .egg, a zipped file, which inadvertantly makes
'simplegeneric' to be dependent on BR2_PACKAGE_PYTHON*_ZLIB. In order
to avoid that specify setup type to be 'setuptools' which makes use of
--single-version-externally-managed and therefore installs the package
as .pyc and a .egg-info folder.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For a while already, our git downloaded tarballs are reproducible, so
we can actually check the hash for them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of excluding the hash specifically for the custom tarball and
custom version cases, exclude it always except in the one case where
we do have a hash: the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case.
It is not needed to exclude it twice for barebox and barebox-aux,
because they use the same source tarball and barebox-aux can only be
enabled if barebox is enabled. So simplify even further by pulling
the exclusion logic out of inner-barebox-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of excluding the hash specifically for the custom tarball and
custom version cases, exclude it always except in the one case where
we do have a hash: the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although we currently don't have a .hash file for linux-headers, there
already are exclusions for the BR2_KERNEL_HEADERS_AS_KERNEL case (copied
from linux.mk). However, there is no exclusion for the
BR2_KERNEL_HEADERS_VERSION case.
For the BR2_KERNEL_HEADERS_AS_KERNEL case, the exclusion is actually
not needed. Indeed, KERNEL_HEADERS_SOURCE is computed to be the same
value as LINUX_SOURCE, and linux.mk already adds LINUX_SOURCE to
BR_NO_CHECK_HASH_FOR.
For the other cases, we should exclude the BR2_KERNEL_HEADERS_VERSION
case because there the user supplies the version so it can't be
included in the .hash file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't have a hash for any linux version. We currently also don't
have a hash for the latest version, but if we ever add a hash, it
will only be for the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case. It's much
easier to always exclude except in the single case where we do have a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libv4l package builds fine even if locale is not enabled.
This have been tested with stm32f469_disco_defconfig
enabling build of libv4l package:
+#v4l utilities
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_PACKAGE_LIBV4L=y
+BR2_PACKAGE_LIBV4L_UTILS=y
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit removes the dependencies on MMU and dynamic libraries.
In order to build v4l2 utilities such as compliancy tools like
v4l2-compliance or cec-compliance, v4-utils can now be built without
dynamic libraries support.
In that case the v4l-utils parts which depends on dynamic library
support are not built:
- libv4l & libv4lconvert libraries
- libv4l plugins
- rds-ctl utility
- contrib test utilities
The rest of the utilities are built.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd's configure is looking in $PATH to find utilities that will be
needed at runtime.
Usually, those utilties, when installed on the host, will be found in
the same path they would be present on the target. For example,
/usr/bin/mount on the host would also be /usr/bin/mount on the target,
and all is find.
Except when we need to install a host variant of util-linux, which will
install mount in $(HOST_DIR), in which case systemd's configure would
find that one.
Of course, it is also very well possible that those utilities are not
installed on the host in the same location they would be on the target,
in case a user has manually installed some of those (e.g. in /usr/local/
or in /opt/)
Forcibly set the path to those utilities, as they are expected to be on
the target.
For kexec, we can set it even though we do not depend on it (yet).
systemd will appropriately test it at runtime.
For quota, we point to non-existing files, so as to catch errors at
runtime. It is to be noted that quotacheck is optional, while quotaon
does not seem to be (a service file is always installed, that uses it).
Note: utilties listed in the order they appear in configure.ac
Reported-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add setuptools runtime dependency, that is needed for
the chardetect script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As can be seen in linux/arch/powerpc/include/uapi/asm/termbits.h are
defined as (note that those are octal numbers):
\#define TABDLY 00006000
\#define CSIZE 00001400
\#define CRDLY 00030000
which gives shifts of 10, 8 and 12. Adjust socat.mk accordingly to
reflect that difference.
Signed-off-by: Mark Hinds <zoronic@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream rejected[1] the patch added in commit 6a1aa4e2da (swupdate: fix
build with older glibc). Instead of carrying this patch going forward, make
librt an extra library dependency in the Buildroot local swupdate .config.
This solution is somewhat less optimal than the patch, because it always adds
librt regardless of whether SURICATTA_HAWKBIT is enabled. In theory we could
add a test for (BR2_PACKAGE_JSON_C && BR2_PACKAGE_LIBCURL), which are the
SURICATTA_HAWKBIT dependencies, and edit .config at build time. But this adds
much complexity for little gain.
[1] https://groups.google.com/forum/?hl=en#!topic/swupdate/77QWIka27es
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... otherwise it fails spectacularly as soon as PATH is referenced in a
package rule (i.e. very soon, fortunately):
>>> host-lzip 1.18 Downloading
/bin/bash: -c: line 0: unexpected EOF while looking for matching `"'
/bin/bash: -c: line 1: syntax error: unexpected end of file
Fixes # 9886.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ciro Santilli <ciro.santilli@gmail.com>
[Thomas: fix typo in message, use tabs for indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an upstream patch to the sngrep package that fixes the
detection of wchar capable ncurses.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic support for orangepi-zero board.
Board support package includes the following components:
- mainline kernel v4.11
- mainline u-boot v2017.03
- extra kernel config options: spidev, spi nor flash, wifi
- dts patches to enable SPI NOR and spidev
More details about this board are available here:
- http://linux-sunxi.org/Orange_Pi_Zero
Note that at the moment networking is not supported right out of the box.
Ethernet submission to mainline kernel is a work in progress, see the
latest dwmac-sun8i branches at https://github.com/montjoie/linux
On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless
driver available at https://github.com/fifteenhex/xradio
Changes from v1:
* Send patch using proper subject
* Update xr819 kernel dts patch: add compatible property
[Peter: fix s/PC/Zero/ typo]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.
However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the update from 0.0.X to 1.0.0 suggests, this is a major update. The driver
uses X11's touch API now, instead of motion with button emulation. Furthermore
it supports multitouch when a recent version of tslib is installed.
It is not backwards compatible for very old versions of the X server. See
https://github.com/merge/xf86-input-tslib/releases for some details.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.11.3 2.9.0 YES OK
arm_versatile 4.11.3 2.9.0 YES OK
arm_versatile_nommu 4.4.70 2.9.0 YES OK
arm_vexpress 4.11.3 2.9.0 YES OK
m68k_mcf5208 4.11.3 2.9.0 YES OK
m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
microblazebe 4.11.3 2.9.0 YES OK
microblazeel 4.11.3 2.9.0 YES OK
mips32r2el_malta 4.11.3 2.9.0 YES OK
mips32r2_malta 4.11.3 2.9.0 YES OK
mips32r6el_malta 4.11.3 2.9.0 YES OK
mips32r6_malta 4.11.3 2.9.0 YES OK
mips64el_malta 4.11.3 2.9.0 YES OK
mips64_malta 4.11.3 2.9.0 YES OK
mips64r6el_malta 4.11.3 2.9.0 YES OK
mips64r6_malta 4.11.3 2.9.0 YES OK
nios2-10m50 4.11.3 2.9.0 NO OK
or1k 4.11.3 2.9.0 NO OK (5)
ppc_g3beige 4.11.3 2.9.0 YES OK
ppc_mpc8544ds 4.11.3 2.9.0 YES OK
ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
ppc64_pseries 4.11.3 2.9.0 YES OK
sh4 4.9.6 2.9.0 YES OK (4)
sh4eb 4.9.6 2.9.0 NO (1) OK (4)
sparc_ss10 4.11.3 2.9.0 YES OK
sparc64_sun4u 4.11.3 2.9.0 YES OK
sparc_sun4u 4.11.3 2.9.0 YES OK
x86 4.11.3 2.9.0 YES OK
x86_64 4.11.3 2.9.0 YES OK
xtensa_lx60 4.11.3 2.9.0 YES OK
xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since tslib now supports static builds the dependency on !BR2_STATIC_LIBS
can be removed from xf86-input-tslib too.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tslib can be configured to be built statically linked. So let's add this option.
tslib is quite configurable and each module can be selected to be built into
the static build. This configuration includes the hardware independent filter
modules (obviously), and the Linux evdev input module.
This results in a configuration that fully supports multitouch in any
combination.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building with old gcc versions (such as gcc 4.3), the current
version of kmod fails with:
shared/util.c:52: error: expected identifier or '(' before 'do'
shared/util.c:52: error: expected identifier or '(' before 'while'
This is due to a use of the internal assert_cc() macro outside of a
function, while this macro is defined for old gcc versions in a way that
cannot be used outside functions.
This wasn't noticed by the autobuilders because we don't have such old
target compilers. On the host side, we have some autobuilder instances
with such old gcc versions, but host-kmod is only used by the linux
package, which is never tested by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SELinux requires a config file in /etc/selinux which controls the state
of SELinux on the system.
This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the
default name is targeted.
This patch adds:
- A choice menu on Config.in that allows the user to select a default
SELinux state.
- A basic config file that will be installed to
target/etc/selinux and will set SELINUX= to the selected state.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_STATE
- qstrip the variable
- drop unused REFPOLICY_NAME variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refpolicy by default will build the highest version supported. This may
cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30,
which is the highest supported as of today.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_VERSION
- use qstrip to remove double quotes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add entry to DEVELOPERS file
- remove redundant dependencies
- drop unused REFPOLICY_PYINC option
- use SPDX tag for license
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The daemon service script associated with imx-uuc failed to stop the daemon
since the PID of the process wasn't stored at start time.
Adding -m option allowed to create the uuc.pid file as expected.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cmake depends on rhash, but host-cmake doesn't. This is because we use
the bundled dependencies for host-cmake but not for target.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are new dependencies: erlang-p1-jiffy, erlang-p1-oauth2,
erlang-p1-stun, erlang-p1-tls, erlang-p1-utils, erlang-p1-xmpp
as well as two host dependencies on erlang-p1-utils and
erlang-p1-xmpp. Otherwise the compilation via rebar fails.
4 patches have been refreshed and a new patch have been introduced to
tell rebar to use host dependencies instead of trying to download them.
Hopefully this patch could be drop in ejabberd 17.06. Missing SoB in
patches have been added as well.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
sdksyms.c:311:15: error: expected expression before »,« token
(void *) &, /* ../../include/os.h:96 */
by backporting an upstream patch, sdksyms.c is generated by
hw/xfree86/sdksyms.sh which is broken when used with gcc5+.
Problem was found while testing
http://patchwork.ozlabs.org/patch/762102/
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_TSLIB=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Botan compiles all PowerPC code with AltiVec support and only determines
at runtime whether the CPU even supports it. If the target CPU uses the
older SPE extensions, though, this is too late; since SPE and AltiVec
are incompatible, gcc aborts the compilation. This patch explicitly
disables AltiVec support unless BR2_POWERPC_CPU_HAS_ALTIVEC is defined
Signed-off-by: Tobias Blass <tobias.blass@rohde-schwarz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need BR2_ARM_CPU_HAS_ARM, otherwise build for cortex-m4 breaks with
"target CPU does not support ARM mode".
We only enable arm/aarch64 support for now, mips support is broken:
test-pkg/br-mips64-n64-full/build/gnu-efi-3.0.5/lib/mips64el/setjmp.S:40:
Error: opcode not supported on this processor: mips64 (mips64) `ext $v0,$v0,29,1'
Tested by test-pkg using this defconfig
BR2_PACKAGE_GNU_EFI=y
with the following results:
armv5-ctng-linux-gnueabi [ 1/49]: OK
armv7-ctng-linux-gnueabihf [ 2/49]: OK
br-aarch64-glibc [ 3/49]: OK
br-arcle-hs38 [ 4/49]: SKIPPED
br-arm-basic [ 5/49]: OK
br-arm-cortex-a9-glibc [ 6/49]: OK
br-arm-cortex-a9-musl [ 7/49]: OK
br-arm-cortex-m4-full [ 8/49]: SKIPPED
br-arm-full [ 9/49]: OK
br-arm-full-nothread [10/49]: OK
br-arm-full-static [11/49]: OK
br-bfin-full [12/49]: SKIPPED
br-i386-pentium4-full [13/49]: OK
br-i386-pentium-mmx-musl [14/49]: OK
br-m68k-5208-full [15/49]: SKIPPED
br-m68k-68040-full [16/49]: SKIPPED
br-microblazeel-full [17/49]: SKIPPED
br-mips32r6-el-hf-glibc [18/49]: SKIPPED
br-mips64-n64-full [19/49]: SKIPPED
br-mips64r6-el-hf-glibc [20/49]: SKIPPED
br-mipsel-o32-full [21/49]: SKIPPED
br-nios2-glibc [22/49]: SKIPPED
br-openrisc-uclibc [23/49]: SKIPPED
br-powerpc-603e-basic-cpp [24/49]: SKIPPED
br-powerpc64le-power8-glibc [25/49]: SKIPPED
br-powerpc64-power7-glibc [26/49]: SKIPPED
br-powerpc-e500mc-full [27/49]: SKIPPED
br-sh4-full [28/49]: SKIPPED
br-sparc64-glibc [29/49]: SKIPPED
br-sparc-uclibc [30/49]: SKIPPED
br-x86-64-core2-full [31/49]: OK
br-x86-64-musl [32/49]: OK
br-xtensa-full [33/49]: SKIPPED
i686-ctng-linux-gnu [34/49]: OK
linaro-aarch64 [35/49]: OK
linaro-arm [36/49]: OK
mips64el-ctng_n32-linux-gnu [37/49]: SKIPPED
mips64el-ctng_n64-linux-gnu [38/49]: SKIPPED
powerpc-ctng_e500v2-linux-gnuspe [39/49]: SKIPPED
sourcery-arm-armv4t [40/49]: OK
sourcery-arm [41/49]: OK
sourcery-arm-thumb2 [42/49]: OK
sourcery-mips64 [43/49]: SKIPPED
sourcery-mips [44/49]: SKIPPED
sourcery-nios2 [45/49]: SKIPPED
sourcery-sh [46/49]: SKIPPED
sourcery-x86-64 [47/49]: OK
sourcery-x86 [48/49]: OK
x86_64-ctng_locales-linux-gnu [49/49]: OK
49 builds, 27 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to the release notes "Compiler support for C++11 is now
required for building the ICU libraries.
GCC: version 4.8 and later has been tested."
Added corresponding dependencies and reverse dependencies.
Removed patch 0006 applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-gcc-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backported from:
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=239971
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream release is broken w.r.t autoreconf, patch 0002 fixes it.
Needed to prepare for upcoming patch to fix linking against newer
flex versions.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tmux uses 256 color version of 'screen' terminfo by default, so copy
corresponding file to support that usecase.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libiconv doesn't build with gcc 6 due to a macro in stdio.h using gets()
which has been removed with the C11 standard.
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
With libiconv 1.15, this macro is protected by
#if HAVE_RAW_DECL_GETS && !defined __cplusplus
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
#endif
Fixes:
http://autobuild.buildroot.net/results/61b/61bbfc839f99feb043d3456f107429d6e5319258
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-fix-CVE-2017-1000367.patch already included in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even when locales are enabled, gettext is not mandatory to build
grep, i.e the following defconfig builds fine:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.02-1096-g54a5333.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_GREP=y
However, if gettext provides libintl, it gets used. Therefore this
commit moves gettext from a mandatory dependency to an optional
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fetchmail itself does not need zlib, there is no reference to it in its
source, so the "select BR2_PACKAGE_ZLIB" is not necessary. Moreover,
"zlib" was not added to FETCHMAIL_DEPENDENCIES (but was anyway in the
dependency chain through openssl).
In addition, LIBS="-lz" is only needed in static linking configurations,
to help fetchmail's configure script find OpenSSL (it doesn't use
pkg-config unfortunately).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even when locales are enabled, gettext is not mandatory to build
fetchmail, i.e the following defconfig builds fine:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.02-1096-g54a5333.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_FETCHMAIL=y
However, if gettext provides libintl, it gets used. Therefore this
commit moves gettext from a mandatory dependency to an optional
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uses a genimage feature to rename the uImage file instead
of manually creating a symlink in the post-image script.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono the version 4.8.1.0. Simultaneously it removes an
upstreamed patch and updates another one to the latest source code.
It also disables the compilation of 'aot' cause the build system was
fixed to support this option again.
It also disables the compilation of the optional BoringTLS stack: this
stack is distributed as an external component inside the mono source
tree and it carries it's own build system (cmake). To be compiled inside
buildroot it requires hacking the mono build system to pass the correct
compiling options to cmake. This will be done in a future patch set.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bash's malloc relies on sbrk which is implemented as a fail-only stub in
musl. Presently, it is disabled when configured for static
libs. Instead, default to using libc malloc.
Fixes:
# bash
bash: xmalloc: locale.c:81: cannot allocate 18 bytes (0 bytes allocated)
Signed-off-by: Daniel Sabogal <dsabogalcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable autoreconf because of missing install-sh.
Add upstream patch fixing build breakage with libtalloc is missing.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the two patches from gcc upstream master we can enable gcc 6.x for
microblaze again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-1000367 - Potential overwrite of arbitrary files on Linux
On Linux systems, sudo parses the /proc/[pid]/stat file to determine the
device number of the process's tty (field 7). The fields in the file are
space-delimited, but it is possible for the command name (field 2) to
include spaces, which sudo does not account for. A user with sudo
privileges can cause sudo to use a device number of the user's choosing by
creating a symbolic link from the sudo binary to a name that contains a
space, followed by a number.
If SELinux is enabled on the system and sudo was built with SELinux support,
a user with sudo privileges may be able to to overwrite an arbitrary file.
This can be escalated to full root access by rewriting a trusted file such
as /etc/shadow or even /etc/sudoers.
For more details, see: https://www.sudo.ws/alerts/linux_tty.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bumping Go to 1.8.3 from 1.7.
Go 1.8 comes with significant performance improvements, particularly
around ARM: "CPU time required by our benchmark programs was reduced by
20-30% on 32-bit ARM systems."
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hwloc package consists of a library and utilities so it should be
installed to both the staging and target directories.
Signed-off-by: Graham Holland <gmh7@sfu.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external toolchain code has some logic to calculate the correct name
for the dynamic linker symbolic link that needs to be created when the
musl C library is being used. There was already some handling for the
mipsel+soft-float case, but not for the mips+soft-float case. Due to
this, the symbolic link was incorrectly named, and programs were
referencing an non-existing file.
Reported-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Docker engine can optionally log to systemd-journald. For this
driver to work correctly, Docker needs to build against
systemd-journald's client library.
This patch conditionally adds a build-time dependency on systemd and
enables compiling the journald driver in docker-engine if systemd is
used as the Buildroot init process.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7650: Two errors in the "asn1_find_node()" function
(lib/parser_aux.c) within GnuTLS libtasn1 version 4.10 can be exploited to
cause a stacked-based buffer overflow by tricking a user into processing a
specially crafted assignments file via the e.g. asn1Coding utility.
For more details, see:
https://secuniaresearch.flexerasoftware.com/secunia_research/2017-11/
Or the 1.4.11 release mail (no mail about 1.4.12, but identical to 1.4.11 +
a soname fix):
https://lists.gnu.org/archive/html/help-libtasn1/2017-05/msg00003.html
Remove 0001-configure-don-t-add-Werror-to-build-flags.patch and autoreconf
as that patch is now upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added notes to the mosh package help to clarify some runtime
issues related with it to ensure mosh will work properly after adding it.
This includes adding a proper LOCALE and an extra flag when using
mosh with dropbear.
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7650: Pattern based ACLs can be bypassed by clients that set
their username/client id to ‘#’ or ‘+’. This allows locally or remotely
connected clients to access MQTT topics that they do have the rights to.
The same issue may be present in third party authentication/access control
plugins for Mosquitto.
For more details, see:
https://mosquitto.org/2017/05/security-advisory-cve-2017-7650/
Remove 0001-Remove-lanl-when-WITH_ADNS-is-unset.patch as that patch is now
upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of security issues: CVE-2017-7607, CVE-2017-7608,
CVE-2017-7609, CVE-2017-7610, CVE-2017-7611, CVE-2017-7612, CVE-2017-7613.
Rebase patches, and convert to git format.
Remove --disable-werror; unrecognized configure option.
Use upstream provided hash.
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
m68k coldfire causes ffmpeg to think atomic intrinsics are available,
so ffmpeg doesn't use its fallback on pthreads based atomic
operations. However, m68k coldfire doesn't provide properly working
sync 4 atomics, causing a build failure.
Since fixing ffmpeg on m68k coldfire is not really important (who
wants to use ffmpeg on such platform?), we simply disallow the
selection of ffmpeg on this platform.
Alternate approaches have been proposed in the past:
- Bernd Kuhls proposed in http://patchwork.ozlabs.org/patch/766909/
to add a dependency on BR2_TOOLCHAIN_HAS_SYNC_4, but this is wrong
because other architectures that lack sync 4 atomics, such as
Sparc, can build ffmpeg perfectly fine thanks to the pthreads based
fallback code.
- Waldemar Brodkorb proposed in
https://patchwork.ozlabs.org/patch/756664/ to add an explicit
option in ffmpeg configure to force the use of pthreads based
atomics. However, we believe that running ffmpeg on m68k coldfire
is such an unlikely use case that it isn't worth carrying a patch
for this.
Fixes:
http://autobuild.buildroot.net/results/b3e/b3eaaf6d73cd49f5919143aeaa5cbb4d15a7ccc3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Bernd [1], using POST_EXTRACT to copy
linux_syscall_support.h break the legal-info target when
google-breakpad package is selected:
/usr/bin/install: cannot stat '/home/bernd/buildroot/buildroot/output/ost/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/linux_syscall_support.h': No such file or directory
This is because linux_syscall_support.h is installed by a dependency
of google-breakpad, and dependencies are only guaranteed to be
available for the configure step of a package. To fix this, we use a
PRE_CONFIGURE hook instead of POST_EXTRACT hook.
[1] http://lists.busybox.net/pipermail/buildroot/2017-May/192844.html
Reported-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'lines' variable is overwritten with its own fields. Thus it
contains a line first, and then a list of fields -- it never contains
'lines'.
Use two different variables named 'line' and 'fields' to make the code
more readable.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed _SITE to github, current version is not available from upstream
website.
Removed patches applied upstream:
0002-Fixed-bugs-due-to-uninitialized-data-in-the-JP2-deco.patch
e96fc4fdd5
0003-Added-a-check-in-the-JP2-encoder-to-ensure-that-the-.patch
58ba0365d9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even if gcc 5 is still maintained for some time (gcc 5.5 is pending),
switch to gcc 6.x since it has been released since 2016-04-27 and
gcc 7.x is available since 2017-05-02.
We have been having toolchains in the autobuilders with gcc
6.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Extended _EXTRACT_CMDS and _INSTALL_TARGET_CMDS to handle updated
internal zip structure:
$ unzip -l ../dl/bootstrap-3.3.1-dist.zip
Archive: ../dl/bootstrap-3.3.1-dist.zip
Length Date Time Name
--------- ---------- ----- ----
0 2014-11-12 18:03 dist/
0 2014-11-12 18:03 dist/css/
[...]
$ unzip -l ../dl/bootstrap-3.3.7-dist.zip
Archive: ../dl/bootstrap-3.3.7-dist.zip
Length Date Time Name
--------- ---------- ----- ----
0 2016-07-25 15:53 bootstrap-3.3.7-dist/css/
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: better fix for the EXTRACT_CMDS, which consists in removing the
dist/ sub-directory.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the mono package is installed, the autotools installer installs
the /etc/mono files to the target. A post_install hook then copies
over the mono libraries to the target as well as the host /etc/mono
files which overrides the target files. The target specific mono
configuration file (/etc/mono/config) is overridden with the host
settings. This causes mono on the target to be unable to locate target
specific .so files as it overrides the changes enacted by the patches
for the package.
Signed-off-by: Dustin Johnson <dustin.r.johnson@gmail.com>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building checkpolicy/test, the linker reports the following error:
cc dispol.o -lfl /usr/src/selinux/DESTDIR/usr/lib/libsepol.a -L/usr/src/selinux/DESTDIR/usr/lib -o dispol
/usr/lib/gcc/x86_64-pc-linux-gnu/6.2.1/../../../../lib/libfl.so: undefined reference to `yylex'
collect2: error: ld returned 1 exit status
According to flex documentation
(https://github.com/westes/flex/blob/master/doc/flex.texi), -lfl is used
to provide an implementation for yywrap(). However every flex file now
uses "%option noyywrap", which makes -lfl no longer mandatory. Remove
this option from checkpolicy Makefiles.
Patch taken from https://patchwork.kernel.org/patch/9450549/
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do want to build the flex binary when building host-flex since it's
needed as a build dependency for other packages.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 4.5.0 the iptables_common.h header is unused. Don't bother
patching this file.
Renumber the following patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Add a patch fixing struct ethhdr conflict using the Buildroot local if_ether.h
kernel header suppression patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fio package was disabled on uClibc because posix_madvise() was
back then not implemented in an official release of uClibc. It now
exists in uClibc-ng since its version 1.0.0, so we can assume it's
available. We already make lots of assumptions about external uClibc
toolchains, and they should definitely be using a recent version of
uClibc-ng to be usable by Buildroot.
Also, the Config.in comment was not handling this uClibc exception.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we have version 7.0, released July 2015. Latest upstream
release 7.1, which dates back to November 2015, causes build errors.
Therefore we bump to git HEAD, updated May 2017, which builds fine.
The package requires gcc-4.9 or later now:
2940c64283
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0001 already included in this release:
438274f938
Patch 0002 already included in this release:
43bc256d8a
Patch 0003 already included in this release:
1044b43637
Patch 0004 already included in this release:
9a72a69e03
Patch 0005 already included in this release:
5c080298d5
Patch 0006 already included in this release:
48780b4fcc
Patch 0007 already included in this release:
d60332057b
Patch 0008 already included in this release:
2ea32f7372
Patch 0009 already included in this release:
8283e4d1b7
Patch 0010 already included in this release:
47f2fb61a3
Patch 0011 already included in this release:
3cfd62d77c
Patch 0012 already included in this release:
0a76a8c765
Patch 0013 already included in this release:
66e7bd5952
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed self-computed sha1 hash, we already provide a sha256 hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2017-8798: Integer signedness error in MiniUPnP MiniUPnPc v1.4.20101221
through v2.0 allows remote attackers to cause a denial of service or
possibly have unspecified other impact.
For more details including a PoC, see:
https://github.com/tintinweb/pub/tree/master/pocs/cve-2017-8798
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2017-3302 - Crash in libmysqlclient.so in Oracle MySQL before 5.6.21 and
5.7.x before 5.7.5 and MariaDB through 5.5.54, 10.0.x through 10.0.29,
10.1.x through 10.1.21, and 10.2.x through 10.2.3.
CVE-2017-3313 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: MyISAM). Supported versions that are affected are
5.5.53 and earlier, 5.6.34 and earlier and 5.7.16 and earlier. Difficult to
exploit vulnerability allows low privileged attacker with logon to the
infrastructure where MySQL Server executes to compromise MySQL Server.
Successful attacks of this vulnerability can result in unauthorized access
to critical data or complete access to all MySQL Server accessible data.
CVE-2017-3308 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DML). Supported versions that are affected are 5.5.54
and earlier, 5.6.35 and earlier and 5.7.17 and earlier. Easily "exploitable"
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. While the vulnerability is
in MySQL Server, attacks may significantly impact additional products.
Successful attacks of this vulnerability can result in unauthorized
ability to cause a hang or frequently repeatable crash (complete DOS) of
MySQL Server.
CVE-2017-3309 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.54 and earlier, 5.6.35 and earlier and 5.7.17 and earlier. Easily
"exploitable" vulnerability allows low privileged attacker with network
access via multiple protocols to compromise MySQL Server. While the
vulnerability is in MySQL Server, attacks may significantly impact
additional products. Successful attacks of this vulnerability can result
in unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2017-3453 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.54 and earlier, 5.6.35 and earlier and 5.7.17 and earlier. Easily
"exploitable" vulnerability allows low privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful attacks
of this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2017-3456 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DML). Supported versions that are affected are 5.5.54
and earlier, 5.6.35 and earlier and 5.7.17 and earlier. Easily "exploitable"
vulnerability allows high privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2017-3464 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are 5.5.54
and earlier, 5.6.35 and earlier and 5.7.17 and earlier. Easily "exploitable"
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized update, insert or delete access to
some of MySQL Server accessible data.
And a number of important, but non-security related fixes:
MDEV-12602: Fixed some race conditions in InnoDB encryption
MariaDB Backup alpha introduced
Galera wsrep library updated to 25.3.20
For details, see the release notes:
https://mariadb.com/kb/en/mariadb/mariadb-10123-release-notes/
[Peter: drop COPYING.LESSER and add a reference to the bugtracker issue
explaining why]
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
- CVE-2017-9078: A double-free in the server could be triggered by an
authenticated user if dropbear is running with -a (Allow connections to
forwarded ports from any host) This could potentially allow arbitrary code
execution as root by an authenticated user. Affects versions 2013.56 to
2016.74. Thanks to Mark Shepard for reporting the crash.
- CVE-2017-9079: Dropbear parsed authorized_keys as root, even if it were a
symlink. The fix is to switch to user permissions when opening
authorized_keys.
A user could symlink their ~/.ssh/authorized_keys to a root-owned file
they couldn't normally read. If they managed to get that file to contain
valid authorized_keys with command= options it might be possible to read
other contents of that file. This information disclosure is to an already
authenticated user. Thanks to Jann Horn of Google Project Zero for
reporting this.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libc-compat.h first appeared in kernel version 3.12. Trying to build a
musl toolchain using earlier headers leads to the following failure:
/bin/sed: can't read .../output/host/usr/arm-buildroot-linux-musleabi/sysroot/usr/include/linux/libc-compat.h: No such file or directory
package/pkg-generic.mk:266: recipe for target '.../output/build/toolchain/.stamp_staging_installed' failed
Don't apply the sed patch to older headers.
Reported-by: Florent Jacquet <florent.jacquet@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-CVE-2017-5985-Ensure-target-netns-is-caller-owned.patch as
it has been integrated upstream
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In configuration where target architecture == host architecture, and
libgpg-error is installed system-wide with development files, the build
of cppcms fails with:
/home/test/buildroot/output/host/usr/bin/x86_64-amd-linux-gnu-g++ --sysroot=/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -Wextra -DNDEBUG CMakeFiles/base64_test.dir/tests/base64_test.cpp.o -o base64_test -L/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib -Wl,-rpath,/home/test/buildroot/output/build/cppcms-1.0.5:/home/test/buildroot/output/build/cppcms-1.0.5/booster:/usr/lib -rdynamic libcppcms.so.1.0.5 booster/libbooster.so.0.0.3 -lpthread /home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libpcre.so /home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so /home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libdl.so /home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libz.so
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpg_err_set_errno@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpgrt_lock_init@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpgrt_lock_destroy@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpg_err_code_from_syserror@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpg_err_code_from_errno@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpgrt_lock_unlock@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpg_strerror@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpg_strsource@GPG_ERROR_1.0'
/home/test/buildroot/output/host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libgcrypt.so: undefined reference to `gpgrt_lock_lock@GPG_ERROR_1.0'
The problem comes from the
"-Wl,-rpath,/home/test/buildroot/output/build/cppcms-1.0.5:/home/test/buildroot/output/build/cppcms-1.0.5/booster:/usr/lib"
option, which tells the linker to search for libraries in /usr/lib.
This commit fixes that by asking CMake to not add any rpath when
building cppcms.
Fixes:
http://autobuild.buildroot.net/results/a7eb1ede552ae14f409cfd7bd877bcf25ca69a74/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently call infra.smart_open() to open log files each time we
need to write to them.
Opening the file once in the constructor of Builder and Emulator and
writing to it whenever needed is simpler and slightly more efficient.
Remove smart_open and instead create a new open_log_file() function
which just opens the logfile. Also let it compute the filename, in
order to simplify even further the Builder and Emulator code.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also fixes compile error with gcc7:
dvbdevice.c: In member function 'bool cDvbTuner::SetFrontend()':
dvbdevice.c:848:31: error: call of overloaded 'abs(unsigned int&)' is ambiguous
frequency = abs(frequency); // Allow for C-band, where the frequency is less than the LOF
^
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is what the manpages usually do, and what Python does with the
automatically-added -h/--help parameter:
Before the change:
$ ./support/testing/run-tests
[...]
optional arguments:
-h, --help show this help message and exit
--list, -l list of available test cases
--all, -a execute all test cases
After the change:
$ ./support/testing/run-tests
[...]
optional arguments:
-h, --help show this help message and exit
-l, --list list of available test cases
-a, --all execute all test cases
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
has_broken_links makes it self-explanatory that this is a predicate
function, and that the return value tells whether there _are_ broken
links, not the opposite.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#9871
gzip reads default command line options from the environment variable GZIP.
The fbgrab Makefile internally also uses a GZIP make variable to know what
command to use to compress the manpage. Unfortunaly make will export the
value of this make variable to the environment if GZIP is already present in
the enviroment, confusing gzip (as 'gzip' isn't a valid command line argument).
This can either be triggered by users having GZIP set in their environment
(E.G. for custom options), or by enabling BR2_REPRODUCIBLE, where we use
this feature to force the -n option (to not store name/timestamp) to gzip.
We don't really need to compress the manpage as it isn't installed anyway,
so work around the issue by only building the fbgrab application.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously was defined in qmi-util.h to fix musl
compatibility. It was missed that this is a shared
header which causes other dependent package builds
to fail, so the static definition was moved into the
implementation where it was used.
Upstream bug report has been updated and this resolves
the following autobuilder related failures.
http://autobuild.buildroot.net/results/fe9b6b1b1399a4e8aafc6a326c81ec97c2480025http://autobuild.buildroot.net/results/40eef797b4d8d53fc6e10f2048316d63549caf6d
test-pkg testing was performed against 10 random toolchains
++ Config snippet ++
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MODEM_MANAGER_LIBQMI=y
BR2_PACKAGE_MODEM_MANAGER=y
BR2_PACKAGE_LIBQMI=y
++ Tested Toolchains ++ (Verified I hit all libc variants)
br-arm-cortex-a9-musl
br-arm-full-static
br-m68k-68040-full (uclibc)
br-mips32r6-el-hf-glibc
br-mips64-n64-full
br-mips64r6-el-hf-glibc
br-mipsel-o32-full
br-sparc64-glibc
linaro-arm
sourcery-arm
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rabbitmq-c currently fails to build in a number of static linking
situations, due to two issues:
- CMake FindOpenSSL module is buggy. Even though it uses pkg-config,
it doesn't use the information returned by pkg-config, and
therefore doesn't know about second order libraries that need be
part of the link for static linking to succeed. Due to this, -lz is
not passed, and therefore rabbitmq-c fails when linking against
libssl/libcrypto. This issue has been reported to upstream CMake at
https://gitlab.kitware.com/cmake/cmake/issues/16885.
- popt might use libintl, but CMake doesn't know about that. For
autotools based packages, we typically work around this by passing
LIBS=, but CMake apparently has no equivalent to LIBS=.
To workaround this, we only use the OpenSSL and Popt optional
dependencies in dynamic linking situations.
Fixes:
http://autobuild.buildroot.net/results/798dbe5e5fd0463bb2066cb115656795144c327f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to Linux kernel version 4.4.41 from the TI SDK 03.03.00.04
(TI SDK release date: 29.03.2017)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-Add-disable-tests-to-configure.patch as it has been
integrated upstream
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes [1]:
main.cpp:(.text._ZN11QQmlPrivate10createIntoI6FbItemEEvPv[_ZN11QQmlPrivate10createIntoI6FbItemEEvPv]+0x18): undefined reference to `QQuickFramebufferObject::QQuickFramebufferObject(QQuickItem*)'
.obj/main.o: In function `QQmlPrivate::QQmlElement<FbItem>::~QQmlElement()':
main.cpp:(.text._ZN11QQmlPrivate11QQmlElementI6FbItemED2Ev[_ZN11QQmlPrivate11QQmlElementI6FbItemED5Ev]+0x5c): undefined reference to `vtable for QQuickFramebufferObject'
.obj/main.o: In function `QQmlPrivate::QQmlElement<FbItem>::~QQmlElement()':
main.cpp:(.text._ZN11QQmlPrivate11QQmlElementI6FbItemED0Ev[_ZN11QQmlPrivate11QQmlElementI6FbItemED0Ev]+0x64): undefined reference to `vtable for QQuickFramebufferObject'
.obj/main.o:(.data.rel.ro._ZTVN11QQmlPrivate11QQmlElementI6FbItemEE[_ZTVN11QQmlPrivate11QQmlElementI6FbItemEE]+0x48): undefined reference to `QQuickFramebufferObject::isTextureProvider() const'
.obj/main.o:(.data.rel.ro._ZTVN11QQmlPrivate11QQmlElementI6FbItemEE[_ZTVN11QQmlPrivate11QQmlElementI6FbItemEE]+0x4c): undefined reference to `QQuickFramebufferObject::textureProvider() const'
.obj/main.o:(.data.rel.ro._ZTVN11QQmlPrivate11QQmlElementI6FbItemEE[_ZTVN11QQmlPrivate11QQmlElementI6FbItemEE]+0xb4): undefined reference to `QQuickFramebufferObject::geometryChanged(QRectF const&, QRectF const&)'
.obj/main.o:(.data.rel.ro._ZTVN11QQmlPrivate11QQmlElementI6FbItemEE[_ZTVN11QQmlPrivate11QQmlElementI6FbItemEE]+0xb8): undefined reference to `QQuickFramebufferObject::updatePaintNode(QSGNode*, QQuickItem::UpdatePaintNodeData*)'
.obj/main.o:(.data.rel.ro._ZTVN11QQmlPrivate11QQmlElementI6FbItemEE[_ZTVN11QQmlPrivate11QQmlElementI6FbItemEE]+0xbc): undefined reference to `QQuickFramebufferObject::releaseResources()'
.obj/moc_fbitem.o: In function `FbItem::qt_metacast(char const*)':
moc_fbitem.cpp:(.text+0x70): undefined reference to `QQuickFramebufferObject::qt_metacast(char const*)'
.obj/moc_fbitem.o: In function `FbItem::qt_metacall(QMetaObject::Call, int, void**)':
moc_fbitem.cpp:(.text+0x80): undefined reference to `QQuickFramebufferObject::qt_metacall(QMetaObject::Call, int, void**)'
.obj/moc_fbitem.o: In function `FbItem::~FbItem()':
moc_fbitem.cpp:(.text._ZN6FbItemD2Ev[_ZN6FbItemD5Ev]+0x38): undefined reference to `vtable for QQuickFramebufferObject'
.obj/moc_fbitem.o: In function `FbItem::~FbItem()':
moc_fbitem.cpp:(.text._ZN6FbItemD0Ev[_ZN6FbItemD0Ev]+0x40): undefined reference to `vtable for QQuickFramebufferObject'
.obj/moc_fbitem.o:(.data.rel.ro+0x8): undefined reference to `typeinfo for QQuickFramebufferObject'
.obj/moc_fbitem.o:(.data.rel.ro+0x58): undefined reference to `QQuickFramebufferObject::isTextureProvider() const'
.obj/moc_fbitem.o:(.data.rel.ro+0x5c): undefined reference to `QQuickFramebufferObject::textureProvider() const'
.obj/moc_fbitem.o:(.data.rel.ro+0xc4): undefined reference to `QQuickFramebufferObject::geometryChanged(QRectF const&, QRectF const&)'
.obj/moc_fbitem.o:(.data.rel.ro+0xc8): undefined reference to `QQuickFramebufferObject::updatePaintNode(QSGNode*, QQuickItem::UpdatePaintNodeData*)'
.obj/moc_fbitem.o:(.data.rel.ro+0xcc): undefined reference to `QQuickFramebufferObject::releaseResources()'
.obj/moc_fbitem.o:(.data.rel.ro+0xf0): undefined reference to `QQuickFramebufferObject::staticMetaObject'
[1] http://autobuild.buildroot.net/results/64a/64a198397736db12b73c1f693dbe1c47d73b53da
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is finally possible to boot LEGO MINDSTORMS EV3 from the mainline
Linux kernel. This patch updates the defconfg to use the mainline kernel
instead of the custom ev3dev kernel.
[Peter: lock kernel headers version]
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add Python SQLite3 dependency that first appeared in 1.5.2.
[Peter: clarify that this is a runtime dependency]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Boost fails to build with the following error:
error: Tried to build the target twice, with property sets having
error: these incompatible properties:
error:
error: - <runtime-link>static <warnings>all
error: - <runtime-link>shared <warnings>on
when the following conditions are met:
- BR2_STATIC_LIBS=y
- BR2_PACKAGE_ICU=y
- BR2_PACKAGE_BOOST_LOCALE=y
- Another BR2_PACKAGE_BOOST_xyz option is enabled, which enables a
feature not provided just by header files, but that requires
building a library.
In such a situation, Boost absolutely wants to build the libboost
libraries as shared libraries. Not having boost-locale, or not having
icu is sufficient to avoid the issue.
So, as a simple work-around, we prevent from building boost-locale
when icu and static linking are used.
Fixes:
http://autobuild.buildroot.net/results/c8f7aa85f5791d8ae8cf4b9085788adc5152286f/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- only disable boost-locale when icu is enabled
- improve commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-8779: rpcbind through 0.2.4, LIBTIRPC through 1.0.1 and 1.0.2-rc
through 1.0.2-rc3, and NTIRPC through 1.4.3 do not consider the maximum RPC
data size during memory allocation for XDR strings, which allows remote
attackers to cause a denial of service (memory consumption with no
subsequent free) via a crafted UDP packet to port 111, aka rpcbomb.
For more details, see:
https://guidovranken.wordpress.com/2017/05/03/rpcbomb-remote-rpcbind-denial-of-service-patches/
Backport upstream fix to version 0.2.3 and unconditionally include syslog.h
to fix a build issue when RPCBIND_DEBUG is disabled (which it is in
Buildroot).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following problem:
------------------------------------>8--------------------------------
arc-linux-gcc -c -Os -fPIC iso9660.i
iso9660.c: In function 'strip_trail':
iso9660.c:155:1: error: unrecognized supposed constant
}
^
(unspec:SI [
(symbol_ref:SI ("*.LANCHOR1") [flags 0x182])
] ARC_UNSPEC_GOTOFFPC)
iso9660.c:155:1: internal compiler error: in arc_legitimate_constant_p, at config/arc/arc.c:6028
------------------------------------>8--------------------------------
Found by Buildroot autobuilder [1].
The fix [2] is in arc-2017.03 development branch of ARC GCC and once it
becomes a part the next release of ARC tools this should be removed
from Buildroot.
[1] http://autobuild.buildroot.net/results/c90/c909e8c397ab972b6aa4d370572cad4fae284d00/build-end.log
[2] 139fed9d29
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit [1] added check package to bluez_utils dependencies without
selecting it at Kconfig level.
Fixes:
Makefile:535: *** check is in the dependency chain of bluez_utils that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in.
[1] 8554be9f82
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcdio doesn't build on ARC, with the following compiler error:
iso9660.c:155:1: error: unrecognized supposed constant
[...]
iso9660.c:155:1: internal compiler error: in arc_legitimate_constant_p, at config/arc/arc.c:6028
Please submit a full bug report,
Since this has been happening for a while and is quite noisy in the
autobuilders results, we disable this package on ARC.
Fixes:
http://autobuild.buildroot.net/results/e837737abaea851bea428a35ea9d3395a6565c54/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the introduction of 4.11 kernel headers in Buildroot, radvd has
failed to build with all toolchains using this kernel header version.
The issue comes from the fact that radvd includes both <net/if_arp.h>
and <linux/if_arp.h> if they are available. Until 4.11,
<linux/if_arp.h> was in fact not included, because the
AC_CHECK_HEADERS() test concluded this header was unsuitable. This has
been fixed in the upstream kernel by commit
2618be7dccf8739b89e1906b64bd8d551af351e6 ("uapi: fix linux/if.h
userspace compilation errors"). So now, the radvd configure script
considers both <net/if_arp.h> and <linux/if_arp.h> as suitable
headers, and includes both of them, leading to the duplicate
definition of various types.
Since it's redundant to include both <net/if_arp.h> and
<linux/if_arp.h>, we simply force radvd to believe that
<linux/if_arp.h> is not available by passing the appropriate autoconf
cache variable. This gets us back to the previous situation, where
<linux/if_arp.h> was never used.
This has been tested with a uClibc toolchain using 4.11 kernel
headers, and verified to work on glibc and musl with older kernel
headers as well.
Fixes:
http://autobuild.buildroot.net/results/949a75d96299394e4ac957746fa23a4b52f31b43/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Running foo-source-check on packages retrieved from git fails.
This is because there is no associated stamp file, so we do not have a
rule-assignment that sets PKG for foo-source-check.
But it does not make sense to have a stamp file at all, because
source-check is not supposed to change anything: the status after is
exactly the same as before; nothing is downlaoded, so there is no
progress (whatsoever) to memorise.
Fix that by just defining PKG in the source-check rule definition.
Fixes#9796.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
odroid-scripts are just scripts, so they should also work on a armeb
board.
Besides, odroid-mali selects it, but it only depends on arm-eabihf,
which means armeb is not ruled out.
Fixes unmet dependencies (with BR2_armeb=y):
warning: (BR2_PACKAGE_ODROID_MALI) selects BR2_PACKAGE_ODROID_SCRIPTS
which has unmet direct dependencies(BR2_aarch64 || BR2_arm)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removes 0001-compat-don-t-re-define-program_invocation_short_name.patch,
since it's applied to upstream in this version.
Tested with:
qemu_ppc_g3beige_defconfig
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building on a systemd-based host for a systemd-based target, gpsd's
buildsystem will try to tell systemd to reload the its configuration and
recreate the entire dependency tree of services.
Of course, this can not work when run as a user:
>>> gpsd 3.16 Installing to target
==== AUTHENTICATING FOR org.freedesktop.systemd1.reload-daemon ===
Authentication is required to reload the systemd state.
Authenticating as: root
Password:
In fact, this does not even mean anything in cross-compilation.
Fortunately, upstream has already fixed their sin, so we backport it
(tweaked to apply onto 3.16).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch using renames are not properly handled by patch < 2.7, which
some users (including autobuilder instances) might be using. Such
renames are silently ignored by old patch versions, caused strange
build failures due to the missed renames.
This patch fixes this by regenerating the patch without renames.
Fixes:
http://autobuild.buildroot.net/results/347d8fd2e286b3e4e5e18743e64d862bdb66dbb9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumps contain mostly translation updates:
package/kodi-pvr-argustv: bump version to 2.5.6
package/kodi-pvr-dvblink: bump version to 3.4.5
package/kodi-pvr-dvbviewer: bump version to 2.4.11
package/kodi-pvr-filmon: bump version to 1.4.9
package/kodi-pvr-hdhomerun: bump version to 2.4.7
package/kodi-pvr-hts: bump version to 3.4.24
package/kodi-pvr-iptvsimple: bump version to 2.4.11
package/kodi-pvr-mediaportal-tvserver: bump version to 2.4.19
package/kodi-pvr-nextpvr: bump version to 2.4.13
package/kodi-pvr-njoy: bump version to 2.4.3
package/kodi-pvr-pctv: bump version to 1.4.7
package/kodi-pvr-stalker: bump version to 2.8.6
package/kodi-pvr-vbox: bump version to 3.6.10
package/kodi-pvr-vdr-vnsi: bump version to 2.6.21
package/kodi-pvr-vuplus: bump version to 2.4.10
package/kodi-pvr-wmc: bump version to 1.4.9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch, so we don't need to autoreconf
Rename patch 0002 -> 0001
Add POWERTOP_SOURCE to adjust to the new archive naming.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter d in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter c in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter b in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping on all
of these Config files. This patch cleans up all warnings related to the
text wrapping for the Config files starting with the letter a in the
package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kvm-unit-tests uses the following code on x86/x86-64:
static inline u64 scale_delta(u64 delta, u64 mul_frac)
{
u64 product, unused;
__asm__ (
"mul %3"
: "=d" (product), "=a" (unused) : "1" (delta), "rm" ((u64)mul_frac) );
return product;
}
The "mul" instruction does not have a suffix that indicates the width of
the data being multiplied. When the data is passed in a register, there
is no need to specify the width, but with some gcc versions, the data is
passed as a memory reference, and therefore the assembler does not know
the width of the data to be multiplied. It causes the following build
failure:
x86/hyperv_clock.c: Assembler messages:
x86/hyperv_clock.c:21: Error: no instruction mnemonic suffix given and no register operands; can't size instruction
Since the data being multiplied is 64 bit, we explicitly specify the
instruction as being "mulq".
Fixes:
http://autobuild.buildroot.net/results/a4a65d01f049db83a93de92660f228dd18532625/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On master 86b4eeccc4, espeak can generate spurious 'unmet dependencies'
messages:
$ make KCONFIG_SEED=0x7A85DEE0 randconfig
warning: (BR2_PACKAGE_ESPEAK_AUDIO_BACKEND_ALSA) selects
BR2_PACKAGE_PORTAUDIO_CXX which has unmet directdependencies
(BR2_PACKAGE_PORTAUDIO && BR2_INSTALL_LIBSTDCPP)
However, the dpendency chain *is* correct. There is something that
causes the kconfig parser to get really confused...
Add a comment statng the issue is spurious, so noone tries to fix it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnaud Aujon <arnaud@intelibre.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
EFL's elput selects libinput but forgot to propagate its dependencies.
Which requires they be propagated further to a second sub-option, then
to a third one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
[Thomas: fix typoes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001 patch removed. It doesn't apply on this version and is also not
necessary since the AR binary is now handled correctly with AR = @AR@.
- 0002 patch removed. It's already included in this release:
a5cbe929ac
- The flex project has moved to GitHub, so modify the URLs in both
flex.mk and Config.in files.
- The sed command over Makefile.in to prevent the flex binary to be
built fails, so remove it. That logic has been moved to
src/Makefile.in, and whenever we disable the flex binary to be built
then the compilation fails when building the documentation because
some bits require "../src/flex", which is the flex binary.
We prevent building the flex binary and the documentation using a new
patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added --disable-concheck to avoid configure failure when libcurl is not
available:
checking for LIBCURL... no
configure: error: --enable-concheck requires libcurl library.
One would expect the concheck functionality to be automatically disabled
if libcurl is not found. But upstream wants to be explicitly disabled if
not wanted to prevent building NetworkManager without connectivity
check support without any evident warning on systems where libcurl is
not installed. See:
faa1b85dab
Proper support for concheck will be added in a subsequent patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, qwt build a shared library, but when BR2_STATIC_LIBS is set
compilation failed with errors like :
__uClibc_main.c:(.text+0x164): undefined reference to `__fini_array_end'
__uClibc_main.c:(.text+0x168): undefined reference to `__fini_array_start'
__uClibc_main.c:(.text+0x16c): undefined reference to `__fini_array_start'
This patch disable QwtDll to build a static library when BR2_STATIC_LIBS=y.
fix:
http://autobuild.buildroot.net/results/739/739406bb8073d1861933872a47802954d9767634/
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efibootmgr was built with -fshort-wchar, which causes gcc to use
2-byte wchar_t instead of the normal 4-byte wchar_t. But this doesn't
work anymore with gcc 6.x, as it causes a build failure:
/home/test/autobuild/run/instance-3/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/6.3.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: warning: efibootmgr.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail
/home/test/autobuild/run/instance-3/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/6.3.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: warning: efi.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail
/home/test/autobuild/run/instance-3/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/6.3.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: warning: unparse_path.o uses 2-byte wchar_t yet the output is to use 4-byte wchar_t; use of wchar_t values across objects may fail
Upstream solution was do simply drop -fshort-wchar:
3466fd05c8
So this commit simply backports this upstream patch.
Fixes:
http://autobuild.buildroot.net/results/87c3ff2427331eb9ab31c9eb685fe80954a0a98f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New release adds a couple new features and improvements, although the
most important one - the test suite - doesn't really matter for
buildroot.
The project has also been relicensed under LGPLv2.1.
We need the m4 directory fixup now since the AC_CONFIG_MACRO_DIRS([m4])
macro was used in configure.ac, but we don't want to have unnecessary
files in the git repo.
New features:
- relicensed under LGPLv2.1
- implemented a unit testing framework together with a comprehensive
set of test cases
- added a non-closing variant of the gpiochip iterator and foreach
macro [by Clemens Gruber]
- added gpiod_chip_open_by_label()
Improvements:
- Makefiles & build commands have been reworked [by Thierry Reding]
- documentation updates
- code shrinkage here and there
- coding style fixes
- removed all designated initializers from the header for better standards
compliance
Bug fixes:
- fix the return value of gpiod_simple_event_loop()
- don't try to process docs if doxygen is not installed
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently messages from run-tests are quite unpleasant:
[br-tests/TestPostScripts/2017-05-09 15:51:57] Building
[br-tests/TestPostScripts/2017-05-09 15:52:23] Building done
[br-tests/TestPostScripts/2017-05-09 15:52:23] Cleaning up
.[br-tests/TestNoTimezone/2017-05-09 15:52:23] Starting
[br-tests/TestNoTimezone/2017-05-09 15:52:23] Building
[br-tests/TestNoTimezone/2017-05-09 15:53:17] Building done
[br-tests/TestNoTimezone/2017-05-09 15:53:22] Cleaning up
.[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Starting
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:53:22] Building
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:33] Building done
[br-tests/TestGlibcNonDefaultLimitedTimezone/2017-05-09 15:54:37] Cleaning up
[...]
Change them in a more readable way by removing the date and using a
columnar style:
15:12:22 TestPostScripts Starting
15:12:25 TestPostScripts Building
15:12:48 TestPostScripts Building done
15:12:48 TestPostScripts Cleaning up
.15:12:48 TestNoTimezone Starting
15:12:54 TestNoTimezone Building
15:13:44 TestNoTimezone Building done
15:13:49 TestNoTimezone Cleaning up
.15:13:49 TestGlibcNonDefaultLimitedTimezone Starting
15:14:00 TestGlibcNonDefaultLimitedTimezone Building
15:14:56 TestGlibcNonDefaultLimitedTimezone Building done
15:15:01 TestGlibcNonDefaultLimitedTimezone Cleaning up
[...]
Note the '.' and other characters presented by nose2 are still
printed. They are not affected by this change.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in commit [1], sparc toolchains doesn't have
any of __sync_*() family of functions implementation.
When __sync_add_and_fetch() is missing, ltp fallback to a local
implementation of tst_atomic_add_return() specific for each
supported architecture.
But there is none for sparc.
So add a dependency on BR2_TOOLCHAIN_HAS_SYNC_4 except for
architectures where a specific implementation is provided
in ltp-testsuite.
Fixes:
http://autobuild.buildroot.net/results/d7c/d7c3b145a64ed3916b89ddb4090050f3b9205e37
[1] 6856e417da
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltp-testsuite needs __sync*() built-ins for 4-byte data, except on a few
architectures for which a specific implementation is provided in
ltp-testsuite source code.
To prepare for the introduction of this dependency, add
BR2_PACKAGE_LTP_TESTSUITE_ARCH_SUPPORTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: slightly adjust how the ARCH_SUPPORTS option is defined.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Between 0.24.0 and 0.25.0, mpv has changed its logic around the
detection/usage of X11 (in upstream commit
927afa311d). Instead
of having fine grained option for x11, xext, xinerama, xscreensaver and
xrandr, mpv now requires all five libraries to be available in order to
enable X.org support.
Therefore, this commit adjusts the mpv packaging so that:
1. All necessary X11 libraries are selected if BR2_PACKAGE_XORG7 is
enabled. It would indeed be too cumbersome for the user to know that
all of x11, xext, xinerama, xscreensaver and xrandr are necessary in
order to have X.org support.
2. mpv.mk is simplified by enabling X.org support when
BR2_PACKAGE_XORG7 is enabled.
Fixes:
http://autobuild.buildroot.net/results/b470cfba451ce9ba648e3a2f3ae08429db8bdee9/
(--disable-xss was used to disable xscreensaver support, and this
option no longer exists)
[Peter: reword X11 comment in .mk]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package can now be used for uClibc toolchains.
Tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED=y
BR2_PACKAGE_BLUEZ5_UTILS_EXPERIMENTAL=y
BR2_PACKAGE_BLUEZ5_PLUGINS_HEALTH=y
BR2_PACKAGE_BLUEZ5_PLUGINS_MIDI=y
BR2_PACKAGE_BLUEZ5_PLUGINS_NFC=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SAP=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SIXAXIS=y
BR2_PACKAGE_BLUEZ5_UTILS_TEST=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An autobuilder exception has been added to avoid testing qt gui module
with the CodeSourcery NiosII toolchain. This allow to remove the
BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 symbol.
This reverts commit 5dce3c05b5.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an initial toolchain test case, testing the ARM
CodeSourcery toolchain, just checking that the proper sysroot is used,
and that a minimal Linux system boots fine under Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds some basic tests for two Buildroot packages: python and
dropbear. These tests are by no mean meant to be exhaustive, but mainly
to serve as initial examples for other tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a number of test cases for various filesystem formats:
ext2/3/4, iso9660, jffs2, squashfs, ubi/ubifs and yaffs2. All of them
except yaffs2 are runtime tested. The iso9660 set of test cases is
particularly rich, testing the proper operation of the iso9660 support
with all of grub, grub2 and isolinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a few Buildroot "core" tests, testing functionalities
such as:
- post-build and post-image scripts
- root filesystem overlays
- timezone support
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the core of a new testing infrastructure that allows to
perform runtime testing of Buildroot generated systems. This
infrastructure uses the Python unittest logic as its foundation.
This core infrastructure commit includes the following aspects:
- A base test class, called BRTest, defined in
support/testing/infra/basetest.py. This base test class inherited
from the Python provided unittest.TestCase, and must be subclassed by
all Buildroot test cases.
Its main purpose is to provide the Python unittest setUp() and
tearDown() methods. In our case, setUp() takes care of building the
Buildroot system described in the test case, and instantiate the
Emulator object in case runtime testing is needed. The tearDown()
method simply cleans things up (stop the emulator, remove the output
directory).
- A Builder class, defined in support/testing/infra/builder.py, simply
responsible for building the Buildroot system in each test case.
- An Emulator class, defined in support/testing/infra/emulator.py,
responsible for running the generated system under Qemu, allowing
each test case to run arbitrary commands inside the emulated system.
- A run-tests script, which is the entry point to start the tests.
Even though I wrote the original version of this small infrastructure, a
huge amount of rework and improvement has been done by Maxime
Hadjinlian, and squashed into this patch. So many thanks to Maxime for
cleaning up and improving my Python code!
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The main reason why vcdbg is only available on ARM is the fact that this is
a prebuilt ARM binary rather than the rpi-userland dependency, so adjust the
comment to clarify.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In c2c06a6de0, cmake version was bumped and a new dependency on libuv
was added, but it did not propagate all the dependencies of libuv,
missing sync_4 (probably because sync_4 was added after the patch was
sent on the list, but before it was applied to the tree).
Fix that, which fixes unmet dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, vcdbg is only supported in 32-bit mode. Furthermore, vcdbg
needs rpi-userland, which we currently only support in 32-bit mode.
Add a dependency on BR2_arm.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
connman no longer triggers a conflict of userspace and kernel headers since
commit 69ced96355 (musl: workaround kernel if_ether.h header conflict). The
real blocker for musl build (besides a few missing includes here and there)
is the missing res_ninit() implementation. Update the comment accordingly.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sunxi-mali userspace drivers (libMali.so) for r2p4 Mali kernel modules
are linked against libUMP.so.2 but libump package in Buildroot only
provide libUMP.so.3.
In upstream commit 1c5063f43cdc9de341c0d63b2e3921cab86c7742 [1], library
versioning was added. For the r3p* libraries, libUMP.so.3 is used (and
provided by Buildroot libump package), but for the r2p* libraries,
libUMP.so.2 is used (and not provided by Buildroot libump package).
Due to this any program or library trying to link with -lGLESv2 or -lEGL
will fail with the following error:
arm-none-linux-gnueabi/bin/ld: warning: libUMP.so.2, needed by output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libMali.so, not found (try using -rpath or -rpath-link)
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_close'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_mapped_pointer_get'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_secure_id_get'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_mapped_pointer_release'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libMali.so: undefined reference to `ump_reference_add'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libMali.so: undefined reference to `ump_size_get'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_reference_release'
output/host/usr/arm-buildroot-linux-gnueabi/sysroot/armv4t/usr/lib/libEGL.so: undefined reference to `ump_open'
collect2: error: ld returned 1 exit status
Since nothing provides libUMP.so.2, this commit removes the
BR2_PACKAGE_SUNXI_MALI_R2P4 option and adds the BR2_ARM_EABIHF
dependency directly to sunxi-mali package.
Fixes:
http://autobuild.buildroot.net/results/8d0/8d0b78798abf0c4ca124952d0d0455da6f8fa14f/
[1] 1c5063f43c
[2] http://lists.busybox.net/pipermail/buildroot/2017-February/183500.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
[Thomas: fix conflicts when applying on master, tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bumps the version of triggerhappy to 0.5.0
The systemd unit supplied by buildroot assumed that filename
globbing was supported by thd. But this was just recently
added. So with this version bump usage of "/dev/input/event*"
is now possible. Systemd Unit is adjusted accordingly.
eventtable.h patch was removed as this was patched upstream.
This patch fixes bug #9836.
Signed-off-by: Michael Heinemann <posted@heine.so>
Instead of duplicating the architecture dependency between the main
option and the Config.in comment, add a
BR2_PACKAGE_LIBSECCOMP_ARCH_SUPPORTS hidden option.
This is done in preparation to enabling libseccomp on ARM.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TOOLCHAIN_BUILDROOT_INET_RPC has been removed in commit
98f7de8796, following the removal from
upstream uClibc-ng of the RPC support.
However, armadeus_apf9328_defconfig was selecting this option, causing a
build failure due to the selection of a legacy option. We simply remove
it as anyway defconfigs should not needlessly enable toolchain options.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762159
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Back when galileo_defconfig was added, an explicit binutils version was
used, because only binutils >= 2.25 had support for the
-momit-lock-prefix option, necessary to workaround a CPU issue.
Support for binutils 2.25 has now been removed from Buildroot, and
therefore the option no longer exists, causing a build failure. The
oldest binutils version that can be selected in Buildroot is binutils
2.26, which has support for -momit-lock-prefix. Therefore, we simply
remove the explicit binutils version selection.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762201
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of OpenOCD from 0.9.0 to 0.10.0 in commit
3b6c74d708, stm32f469_disco_defconfig
fails to build:
- 0001-add-config.patch was merged in upstream OpenOCD (commit
26045588f462476cee356d15a24944d6c26befb4).
- 0002-flash-nor.patch was merged in upstream OpenOCD (commit
3e219648c80a27f0519003f3b088cbb846e255d8)
Therefore, this commit removes the two patches that are no longer
necessary.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762279
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_efi_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762234
This commit is identical to 9c393ad2fd
from Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>, except it
is done for pc_x86_64_efi_defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 4b2440b7dc ("beaglebone: add DT
for BeagleBone Green"), both beaglebone_defconfig and
beaglebone_qt5_defconfig were updated to add "am335x-bonegreen" to the
list of Device Tree files to be produced.
However, beaglebone_qt5_defconfig uses an older kernel version than
beaglebone_defconfig, in which am335x-bonegreen doesn't exist.
Therefore, revert the change on beaglebone_qt5_defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/builds/15762182
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LUAPATH variable is only used when installing the lua module, and
cmake knows very well how to do out-of-tree isntalls, so there is no
reason to include the staging path in LUAPATH, which will cause our
post-install sanity checks to kick in and whine:
libubox: installs files in /home/lhk/workspace/orangepi/host/usr/a
rm-buildroot-linux-gnueabihf/sysroot//home/lhk/workspace/orangepi
As for libuci, just pass the runtime LUAPATH.
Fixes#9856
Reported-by: linhuikui@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ltp-testsuite now builds fine with our default uClibc
configuration, so remove the Config.in comment and the part of the
Config.in help text related to building with uClibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was already a post-build hook to delete the /var/lib/dbus symlink
created by buildroot after the package's own installation, to prevent
a dbus installation error during "make dbus-rebuild". However, this
misses the case for when one might delete the .stamp_target_installed
file manually, outside of dbus-rebuild. This can be fixed by changing
the post-build hook to a pre-install hook. This seems appropriate,
since it is really addressing an installation issue, not a build issue.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lutok is a lua module, so it depends on ! static libs. However, the
dependency is implicit, being done because the lua modules are sourced
globally under an if-block, and thus it is not easy to find that
dependency.
Propagate that dependency to kyua, which was missing it (because it is
not a lua module, so was missing the dependency).
[Peter: also update toolchain comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disregard to increase just minor version BlueZ 5.44 is drastically different in
a way what plugins that used to be enabled by the --enable-experimental
configure option, now have their own option.
Extend Buildroot package to cover these plugins.
Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In BlueZ 5.44 the --enable-experimental configure option only controls the
build of the Nokia OBEX PC Suite plugin. Correct the option prompt and help
text.
Cc: Marcin Bis <marcin@bis.org.pl>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils 2.27 triggers a segfault in elf2flt on ARM/noMMU. While Arnout
has identified a binutils 2.28 commit that can be backported on 2.27,
this commit is huge and we don't clearly understand the impact.
Since both binutils 2.26 and 2.28 are unaffected by this issue, we
simply disallow the selection of binutils 2.27 on ARM/noMMU, and default
to binutils 2.28.
Fixes:
http://autobuild.buildroot.net/results/e14cadb290b0b86cac12c4bfb681eb6eee9e6dea/
and lots of other similar ARM/Cortex-M4 failures
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_ARM_CPU_HAS_ARM already embeddeds the fact that this is an ARM chip,
so (BR2_arm || BR2_armeb) is forcibly true when BR2_ARM_CPU_HAS_ARM is.
In other words, BR2_ARM_CPU_HAS_ARM can't be true unless either BR2_arm
or BR2_armeb itslef is true.
Simplify the logic accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since uClibc-ng v1.0.20 we can force libc to either use llock/scond
instructions for atomic ops or if those are missing use kernel-assisted
emulation. By default atomics are used so we disable that feature in
libc if we build for a target without LLSC.
This allows us to build and use NPTL on ARC750 for example which was not
possible before.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
spidev_test has further evolved after kernel version 3.15, which
is the most recent version that could be built in this package.
This change allows to build the latest version of spidev_test if
the toolchain's kernel header version allows it. In this way, when
building with a newer toolchain, we are able to benefit from the
added functionality offered by the newest version of the tool.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fsck wrapper from util-linux is better maintained, so it should be
preferred. In particular, systemd relies on features in the util-linux
fsck wrapper that don't exist in the e2fsprogs one. However, since
e2fsprogs depends on util-linux, the one from e2fsprogs currently has
precedence. So in order to have e2fsck from e2fsprogs and the fsck
wrapper from util-linux, we disable e2fsprogs' fsck if the one from
util-linux is selected.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
CC: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Arnout: don't add comment]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't need e2initrd_helper or the test I/O manager for the host, just
like we don't need it for the target.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: don't add --disable-rpath, since we *do* need rpath for the
host; otherwise we have to explicitly pass LD_LIBRARY_PATH to be able
to run tools linked with util-linux' libuuid/libblkid]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far we attempted to solve the conflicts between busybox and e2fsprogs
by removing busybox programs from /bin and /sbin, leaving the e2fsprogs
ones at /usr/bin and /usr/sbin. This fails with BR2_ROOTFS_MERGED_USR=y,
leading to situations like the one described in bug 9436.
We could provide a better solution by means of a fine-grained selection
of programs, like util-linux does, but this would require big changes in
e2fsprogs. So instead of resorting to dirty tricks we switch to a more
pragmatic approach:
- Drop all configs to select/deselect utilities without corresponding
enable/disable options to the configure script. In other words, we
always install the basic set of utilities.
- fsck has a configure option, so use it. Note that --enable-fsck is
only about the wrapper, not about e2fsck.
- Install e2fsprogs utilities at /bin and /sbin, overriding the ones
eventually installed by busybox.
- Let the e2fsprogs build system create the symlinks mkfs.ext2 -> mke2fs
etc. fsck.ext4dev and mkfs.ext4dev were dropped in version 1.43.4.
Notice that these changes do exactly the opposite of what is requested
in bug 9436. On the other hand the policy for e2fsprogs becomes coherent
with the one for util-linux: busybox never wins.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=9436 (no fix, in fact)
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout:
- don't add 'default y' to resize2fs;
- don't install the host package in /bin instead of /usr/bin - we
install everything under /usr (until /usr will be removed, soon)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tinyxml2 can build both static and shared libraries. By default, only
shared library is built. Shared/static builds are controlled using
separate cmake flags BUILD_SHARED_LIBS and BUILD_STATIC_LIBS.
In static libs configuration, we internally pass -DBUILD_SHARED_LIBS=OFF
cmake flag to build system which disables both shared and static builds
of library, resulting in failures while linking executable with library.
So pass -DBUILD_STATIC_LIBS=ON cmake flag in case of static libs
configuration.
fixes:
http://autobuild.buildroot.net/results/d30/d301bcbe5db26068b35eaa94bd816ae8cf8ef2e1
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration builds a 64bit image for RaspberryPi 3.
The size of the ext4 filesystem has to be extended to fit the large amount
(~60MB) of kernel modules enabled in the defconfig.
[Peter: drop gcc version selection / glibc, explain ext4 size requirement]
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable support for OpenSSH to use a hardware SSL engine if
cryptodev-linux is included. Without this, OpenSSH uses only
OpenSSL software crypto implementation.
Signed-off-by: Gilad Ben-Yossef <gilad@benyossef.com>
CC: Baruch Siach <baruch@tkos.co.il>
CC: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add firmware file for the Raspberry Pi 3 and Zero W Bluetooth module.
Note that to successfully download the firmware bluez5_utils needs a patch[1].
Even though the firmware file name (BCM43430A1.hcd) only mentions the
Bluetooth module, it is most likely tailored for the Raspberry Pi boards.
Firmware for the same BT module on other boards look different. For this
reason the name of the package is rpi-bt-firmware.
[1] http://www.spinics.net/lists/linux-bluetooth/msg69470.html
[Peter: correct Config.in ordering]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This allows a static build of picocom when BR2_STATIC_LIBS=y but the toolchain
provides static and shared libraries.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds overlay support.
Drop the non-upstreamed 0002-extra-cflags.patch and instead simply pass the
needed CFLAGS as make arguments. Passing the full upstream warning flags
are not important in the Buildroot context, so this is simpler than
maintaining a patch.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We so far were using a Cortex-A7 as the CPU for the rpi3, as this was
the closest we had available, in 32-bit mode, to the real CPU used in
the rpi3.
But now we can also use the Cortex-A53 in 32-bit mode, so we use that,
which makes for an optimised build (A53 has an improved instruction set,
as compared to the A7).
Also drop the DTB overlay option, it defaults to 'y'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter y in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter x in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter w in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter v in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter u in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter t in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter s in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter r in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter q in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change renders the stm32f429discovery a bit more generic and reuse most
of its settings for the stm32f429-disc1 board.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, remove the compile flags to make it build
with GCC6 as it was added upstream
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter p in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter o in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter n in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter m in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter l in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter k in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter j in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter i in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter g in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 81c438aa (package/kodi: Rework audio encoder support), the prompt for
the optical drive support was dropped, on the assumption that such
support was only needed when an audio encoder was enabled.
However, support for optical drives is also required when, surprisingly,
one wants to read a DVD (and probably a BD as well, but this was not
tested by lack of hardware).
Re-instate the prompt, so one can enable optical drive support even when
no audio encoder enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcurl is unconditionally added to the dependencies list in
supertux.mk. However libcurl is not selected in Config.in.
This patch fixes that.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream post-2.7.1 commits (except for ChangeLog modifications) fixing
the following security issues:
CVE-2017-8105 - FreeType 2 before 2017-03-24 has an out-of-bounds write
caused by a heap-based buffer overflow related to the
t1_decoder_parse_charstrings function in psaux/t1decode.c.
CVE-2017-8287 - FreeType 2 before 2017-03-26 has an out-of-bounds write
caused by a heap-based buffer overflow related to the
t1_builder_close_contour function in psaux/psobjs.c.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter f in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter e in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter d in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter c in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter b in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on ordering issues
on all of these Config files. This patch cleans up all warnings
related to the ordering in the Config files for packages starting with
the letter a in the package directory.
The appropriate ordering is: type, default, depends on, select, help
See http://nightly.buildroot.org/#_config_files for more information.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on indentation issues
on all of these Config.in files. This patch cleans up warnings related to
the indentation of the Config.in files in the package directory
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: do not change package/kodi/Config.in and package/x11r7/Config.in.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since XBMC was renamed to Kodi, upstream is progressively propagating
the rename to directories and files, and in some cases kept a legacy
symlink xbmc->kodi, like /usr/lib/xbmc pointing to /usr/lib/kodi.
In 62165ae (package/kodi: Fix path to binary in service), the path was
changed to use the new canonical path, but the init script was left out.
This was not seen previously, because of the legacy symlink.
But with the advent of Kodi 17 (Krypton), that legacy symlink is no
more, and the init script no longer works.
Do for the init script what was done two years ago for the service file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in previous commits, Buildroot only ever uses the free
license, and we do not have a click-wrap approval for any such free
license for any other package.
The option to approve the license now has no prompt and is no longer
used anywhere.
Legacy handling is not added because it is not useful: when the option
was enabled, it meant "accept the open source license", which is now the
default and only existing behavior.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: remove legacy handling as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated in previous commits, Buildroot only ever uses the free
license, and we do not have a click-wrap approval for any such free
license for any other package.
The option to approve the license now has no prompt and is no longer
used anywhere.
Legacy handling is not added because it is not useful: when the option
was enabled, it meant "accept the open source license", which is now the
default and only existing behavior.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: remove legacy handling as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5xmlpatterns will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5x11extras will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5websockets will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5webkit will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5webchannel will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5tools will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5svg will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5serialport will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5serialbus will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5sensors will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5script will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5quickcontrols2 will be there to be consulted
as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5quickcontrols will be there to be consulted
as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5multimedia will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5location will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5imageformats will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5graphicaleffects will be there to be consulted
as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5enginio will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5declarative will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5connectivity will be there to be consulted as
well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5canvas will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt53d will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for qt5base will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We never ask the user to confirm their assent about the use of a free
license; there is no reason we do so for Qt.
The output of legal-info is there to gather all the licenses used in a
build; the license for Qt will be there to be consulted as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The only license we can act upon in Buildroot is the publicly
available license.
Qt can come under non-free licenses, but we have no access to
such licenses. The conditions to access the code under those
non-free, non-public licenses is unknown.
Besides, Qt5 (with Qt) is the only package that has this choice;
for other packages in a similar situation, we only use the free,
publicly-known licenses.
Finally, the name of the tarballs we download clearly hint that
they can only be used under the free license.
Drop the prompt to the accepted license, and make it mandatory;
packages will be adapted in follow-up patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The only license we can act upon in Buildroot is the publicly
available license.
Qt can come under non-free licenses, but we have no access to
such licenses. The conditions to access the code under those
non-free, non-public licenses is unknown.
Besides, Qt (with Qt5) is the only package that has this choice;
for other packages in a similar situation, we only use the free,
publicly-known licenses.
Finally, the name of the tarballs we download clearly hint that
they can only be used under the free license.
Drop the prompt to the accepted license, and make it mandatory;
packages will be adapted in follow-up patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some configure options have been renamed. Support for the deprecated
FT2232 devices has been removed in this release, so remove this option.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
[Thomas:
- Add Config.in.legacy handling, suggested by Arnout.
- Improve commit log with more details, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patches are removed as they are part of this release. 0.0.7 is a
bugfix and compatibility release to keep this usable for on newer systems.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This switches upstream to the Github project where xf86-input-tslib is
currently maintained - in cooperation with Pengutronix, who had hosted
the tarball release up until now.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
[Thomas: fix XDRIVER_XF86_INPUT_TSLIB_SITE value.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ac_cv_type__Bool=yes is needed to fix compilation with gcc >= 5.
Added patch to fix X.org includes.
Added dependency for libpng previously provided by Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for upcoming kodi version bump to 17.1-Krypton which will also
switch the kodi build system to CMake.
"-std=c++0x" is needed to maintain compatability with host-gcc 4.6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: move texturepacker patch from Kodi package, use SPDX license
code, minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for upcoming kodi version bump to 17.1-Krypton which will also
switch the kodi build system to CMake.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: do not add texturepacker patch in this commit, use SPDX license
code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-8291 - Artifex Ghostscript through 2017-04-26 allows -dSAFER bypass
and remote command execution via a "/OutputFile (%pipe%" substring in a
crafted .eps document that is an input to the gs program, as exploited in
the wild in April 2017.
For more details, see https://bugzilla.suse.com/show_bug.cgi?id=1036453
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When called from BR2_ROOTFS_POST_IMAGE_SCRIPT, this script
ends up with following error:
Error: Missing argument
This is because, an extra positional argument is also passed
along with BR2_ROOTFS_POST_SCRIPT_ARGS. genimage.sh didn't
have support to parse positional and optional arguments
together.
Signed-off-by: Abhimanyu Vishwakarma <Abhimanyu.V@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The advantages of using a pre-existing coding style instead of creating
our own are:
- documenting on the manual takes a single sentence;
- there are automatic tools to help during development/review.
So document that PEP8 recommendation should be followed.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Since 1.10.3:
CVE-2016-9013 - User with hardcoded password created when running tests on
Oracle
Marti Raudsepp reported that a user with a hardcoded password is created
when running tests with an Oracle database.
CVE-2016-9014 - DNS rebinding vulnerability when DEBUG=True
Aymeric Augustin discovered that Django does not properly validate the Host
header against settings.ALLOWED_HOSTS when the debug setting is enabled. A
remote attacker can take advantage of this flaw to perform DNS rebinding
attacks.
Since 1.10.7:
CVE-2017-7233 - Open redirect and possible XSS attack via user-supplied
numeric redirect URLs
It was discovered that is_safe_url() does not properly handle certain
numeric URLs as safe. A remote attacker can take advantage of this flaw to
perform XSS attacks or to use a Django server as an open redirect.
CVE-2017-7234 - Open redirect vulnerability in django.views.static.serve()
Phithon from Chaitin Tech discovered an open redirect vulnerability in the
django.views.static.serve() view. Note that this view is not intended for
production use.
Cc: Oli Vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udev support was added with this bump, however
the support was disabled, as Buildroot currently
doesn't support the gudev package. libqmi is
looking for the Gobject bindings provided by
that package to access libudev.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream post-4.0.7 commits (except for ChangeLog modifications) fixing
the following security issues:
CVE-2016-10266 - LibTIFF 4.0.7 allows remote attackers to cause a denial of
service (divide-by-zero error and application crash) via a crafted TIFF
image, related to libtiff/tif_read.c:351:22.
CVE-2016-10267 - LibTIFF 4.0.7 allows remote attackers to cause a denial of
service (divide-by-zero error and application crash) via a crafted TIFF
image, related to libtiff/tif_ojpeg.c:816:8.
CVE-2016-10269 - LibTIFF 4.0.7 allows remote attackers to cause a denial of
service (heap-based buffer over-read) or possibly have unspecified other
impact via a crafted TIFF image, related to "READ of size 512" and
libtiff/tif_unix.c:340:2.
CVE-2016-10270 - LibTIFF 4.0.7 allows remote attackers to cause a denial of
service (heap-based buffer over-read) or possibly have unspecified other
impact via a crafted TIFF image, related to "READ of size 8" and
libtiff/tif_read.c:523:22.
CVE-2017-5225 - LibTIFF version 4.0.7 is vulnerable to a heap buffer
overflow in the tools/tiffcp resulting in DoS or code execution via a
crafted BitsPerSample value.
CVE-2017-7592 - The putagreytile function in tif_getimage.c in LibTIFF 4.0.7
has a left-shift undefined behavior issue, which might allow remote
attackers to cause a denial of service (application crash) or possibly have
unspecified other impact via a crafted image.
CVE-2017-7593 - tif_read.c in LibTIFF 4.0.7 does not ensure that tif_rawdata
is properly initialized, which might allow remote attackers to obtain
sensitive information from process memory via a crafted image.
CVE-2017-7594 - The OJPEGReadHeaderInfoSecTablesDcTable function in
tif_ojpeg.c in LibTIFF 4.0.7 allows remote attackers to cause a denial of
service (memory leak) via a crafted image.
CVE-2017-7595 - The JPEGSetupEncode function in tiff_jpeg.c in LibTIFF 4.0.7
allows remote attackers to cause a denial of service (divide-by-zero error
and application crash) via a crafted image.
CVE-2017-7598 - tif_dirread.c in LibTIFF 4.0.7 might allow remote attackers
to cause a denial of service (divide-by-zero error and application crash)
via a crafted image.
CVE-2017-7601 - LibTIFF 4.0.7 has a "shift exponent too large for 64-bit
type long" undefined behavior issue, which might allow remote attackers to
cause a denial of service (application crash) or possibly have unspecified
other impact via a crafted image.
CVE-2017-7602 - LibTIFF 4.0.7 has a signed integer overflow, which might
allow remote attackers to cause a denial of service (application crash) or
possibly have unspecified other impact via a crafted image.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2017-7867 - International Components for Unicode (ICU) for C/C++ before
2017-02-13 has an out-of-bounds write caused by a heap-based buffer overflow
related to the utf8TextAccess function in common/utext.cpp and the
utext_setNativeIndex* function.
CVE-2017-7868 - International Components for Unicode (ICU) for C/C++ before
2017-02-13 has an out-of-bounds write caused by a heap-based buffer overflow
related to the utf8TextAccess function in common/utext.cpp and the
utext_moveIndex32* function.
Upstream: http://bugs.icu-project.org/trac/changeset/39671
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are not carrying any patches modifying auto* files, so autoreconf isn't
needed.
[Peter: extend commit message]
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The DEVELOPERS email address of Waldemar Rymarkiewicz is bouncing. Remove his
entry.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2017-7585 - In libsndfile before 1.0.28, an error in the
"flac_buffer_copy()" function (flac.c) can be exploited to cause a
stack-based buffer overflow via a specially crafted FLAC file.
CVE-2017-7586 - In libsndfile before 1.0.28, an error in the "header_read()"
function (common.c) when handling ID3 tags can be exploited to cause a
stack-based buffer overflow via a specially crafted FLAC file.
CVE-2017-7741 - In libsndfile before 1.0.28, an error in the
"flac_buffer_copy()" function (flac.c) can be exploited to cause a
segmentation violation (with write memory access) via a specially crafted
FLAC file during a resample attempt, a similar issue to CVE-2017-7585.
CVE-2017-7742 - In libsndfile before 1.0.28, an error in the
"flac_buffer_copy()" function (flac.c) can be exploited to cause a
segmentation violation (with read memory access) via a specially crafted
FLAC file during a resample attempt, a similar issue to CVE-2017-7585.
Dop undocumented patch adjusting SUBDIRS in Makefile.in as it no longer
applies. Instead pass --disable-full-suite to disable man pages,
documentation and programs, as that was presumably the reason for the patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes aarch64 C++ issue. Removes old implementations for fnmatch/regex.
Allow long double wrappers for all architectures.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is not yet part of any release.
coders/rle.c in ImageMagick 7.0.5-4 has an "outside the range of
representable values of type unsigned char" undefined behavior issue, which
might allow remote attackers to cause a denial of service (application
crash) or possibly have unspecified other impact via a crafted image.
For more details, see:
https://blogs.gentoo.org/ago/2017/04/02/imagemagick-undefined-behavior-in-codersrle-c/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These have been added to upstream git after 0.6.12 was released.
CVE-2017-7960 - The cr_input_new_from_uri function in cr-input.c in libcroco
0.6.11 and 0.6.12 allows remote attackers to cause a denial of service
(heap-based buffer over-read) via a crafted CSS file.
CVE-2017-7961 - The cr_tknzr_parse_rgb function in cr-tknzr.c in libcroco
0.6.11 and 0.6.12 has an "outside the range of representable values of type
long" undefined behavior issue, which might allow remote attackers to cause
a denial of service (application crash) or possibly have unspecified other
impact via a crafted CSS file.
For more details, see:
https://blogs.gentoo.org/ago/2017/04/17/libcroco-heap-overflow-and-undefined-behavior/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2016-4806 - Web2py versions 2.14.5 and below was affected by Local File
Inclusion vulnerability, which allows a malicious intended user to
read/access web server sensitive files.
CVE-2016-4807 - Web2py versions 2.14.5 and below was affected by Reflected
XSS vulnerability, which allows an attacker to perform an XSS attack on
logged in user (admin).
CVE-2016-4808 - Web2py versions 2.14.5 and below was affected by CSRF (Cross
Site Request Forgery) vulnerability, which allows an attacker to trick a
logged in user to perform some unwanted actions i.e An attacker can trick an
victim to disable the installed application just by sending a URL to victim.
CVE-2016-10321 - web2py before 2.14.6 does not properly check if a host is
denied before verifying passwords, allowing a remote attacker to perform
brute-force attacks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removing clear and reset from the busybox config when the ncurses tools
are enabled is not really needed.
Since commit 802bff9c42, the busybox install will not overwrite
existing programs. Therefore, the tools will be installed correctly
regardless of the order of the build:
- if busybox is built first, the clear and reset apps are installed,
but they will be overwritten by ncurses;
- if ncurses is built first, it will install the clear and reset apps,
and busybox will no longer install them.
We prefer not to modify the busybox configuration when not strictly
necessary, because it is surprising for the user that his configuration
is not applied. Clearly, it's not ideal that busybox is configured with
redundant apps, but if the user wants to shrink it, it's possible to
provide a custom config.
This partially reverts commit 33c72344a8.
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Library is licensed under BSD-3-Clause. Some programs are licensed
under GPL-2.0+ while other are BSD-3-Clause. Annotate licenses with
components and improve readability of license strings when
conditionally specifying license for programs using := instead of +=.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0003-fix-build-with-have-gl.patch which is already included in
this release.
Remove --{enable|disable}-standard-gl configure option because it
doesn't exist.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script when ran gave warnings on only using
one space before backslashes on all of these makefiles.
This patch cleans up all warnings related to the one space before
backslashes rule in the make files in the package directory.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps ARC toolchain to arc-2017.03-rc1
Please note that it is a release candidate and it might contain some
breakages, please don't use it for production builds.
Also I have updated patches for binutils as our source files in
binutils differ comparing to 2.28.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both packages are coupled, so both are bumped and build-tested.
The atomics' support patch is no longer needed, and neither is the
autoreconf option, and SPARC64 is no longer broken.
To make sure of this, one config of each of the following archs was
tested (base defconfig in parens):
- PowerPC (qemu_ppc_g3beige_defconfig)
- SPARC (qemu_sparc_ss10_defconfig)
- SPARC64 (qemu_sparc64_sun4u_defconfig)
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The warning currently reads:
No board defconfig name specified, check your
BR2_TARGET_UBOOT_DEFCONFIG setting.
It should read:
No board defconfig name specified, check your
BR2_TARGET_UBOOT_BOARD_DEFCONFIG setting.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have a host-util-linux, so we can use it to provide libblkid and
libuuid. This makes it consistent with the target package.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In fact, uuidgen was never built because we pass --disable-libuuid. So
the option was a NOP.
Remove the license info for libuuid.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout:
- do not remove --disable-uuidd - even though that is implied by
--disable-libuuid, it's better to be explicit about it;
- remove license info of libuuid]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We decided some time ago that config entries with 5 or more suboptions
should be turned into a menuconfig. e2fsprogs has many more than that.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sf.net redirects to sourceforge.net, so directly use that as upstream
URL. Config.in.host already uses that URL.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: remove trailing /]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai has many configure options that users may or may not want to set.
Providing individual Buildroot config options for every single one of them
is not maintainable.
Therefore, add a string option to allow the needed flexibility.
Important options, or those that have 'select/depends on' impact, can still
be turned into real Buildroot config options.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a config option to enable the Xenomai registry, which allows accessing
internal Xenomai state.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas:
- add missing Config.in comment.
- rewrap Config.in help text.
- tweak the .mk file logic for the registry path to avoid the super
long line.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai 3 installs quite some utils and other programs to the target
filesystem, many of which will not be used by most users.
As it is currently unclear which utils are effectively useful, and as it is
undesirable to create config options for each individual util, remove all
remaining utils such that only the Xenomai libraries remain.
At the point it becomes clear that certain utils _are_ desired by some
users, we can identify how to group them in relevant config options.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Xenomai 3, the list of files installed for Analogy is longer, causing
the extra files to remain on the target filesystem even if Analogy is not
selected.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai has a skin 'Smokey' that Buildroot is currently unaware of, which
means that the associated files are present on target even though most users
will not need them.
Add a config option and associated logic to remove the skin if not selected.
Additionally, fixup order of VxWorks skin removal entry.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Clarify the Xenomai config options by grouping the skin-related options in a
separate menu.
Additionally:
- update proper capitalization of skin names
- sort entries
- replace 'skin library' by 'skin' to match the terminology in Xenomai
sources
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the introduction of Xenomai 3, the native skin is dubbed Alchemy.
Update the config menu (but leave the symbol name to avoid hurting existing
users needlessly) and fix the unselected-skin cleanup code.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai sources contain much more license files than we currently list, so
complete the current list.
Based on:
find | grep -Ei 'copying|license|copyright' | sort
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ensure that GTest is compiled with -fPIC to allow linking the static
libraries with dynamically linked programs. This is not a requirement
for most architectures but is mandatory for ARM.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the check-package script uses many files in the same
directory. This commit keeps the main script in support/scripts/ and
moves the rest into a subdirectory.
The modules were previously prefixed to make it easy to identify which
script they belong to. This is no longer needed when using a
subdirectory, so the prefix is removed.
Note: if this commit is checked out and the script is run, and later on
a previous version is checked out, the file
support/scripts/checkpackagelib/__init__.pyc needs to be manually
removed to prevent Python interpreter to look for checkpackagelib
package when only the checkpackagelib module is available.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The removal of the .git dir before creating the tarball is not anymore
just an optimization. It is necessary to make the tarball reproducible.
Also, without the removal, large tarballs (gigabytes) would be created
for some linux trees.
Update the comment accordingly.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-5461 - Out-of-bounds write in Base64 encoding in NSS. Might cause
remote arbitrary code execution
(https://access.redhat.com/errata/RHSA-2017:1100).
CVE-2017-5462 - DRBG flaw in NSS
Drop 0001-cross-compile.patch and TARGET* variables. Upstream Makefile now
allows override of CC, so use TARGET_CONFIGURE_OPTS instead.
Drop upstream 0003-it-uninitialized-fix.patch.
Renumber the remaining patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The latest docker-engine release changes the vendor tree slightly. The
Go tool will recognize a ./vendor directory and use it as a vendor tree
automatically, but only when run inside a valid GOPATH. This patch
adjusts how the GOPATH is built - now docker/docker is linked into a
blank tree, and the Go tool recognizes the ./vendor directory correctly.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch for linux vdk defconfig introduced ARC_SMP_HALT_ON_RESET
config symbol. In fact that is not required as this symbol is enabled by
default if ARC_UBOOT_SUPPORT config symbol is set (and it is set in
vdk configs).
Also this commit fixes build failure, pointed us by Arnout:
https://gitlab.com/buildroot.org/buildroot/builds/14419270
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain name was calculated in main() for reporting to the user,
and again in build_one() for creating the build directory. Calculate
it only once, in main(), and pass the build directory as an argument
to build_one().
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without pkg-config PKG_CHECK_MODULES won't be expanded
and ./configure script produces following error message:
./configure: line 13810: syntax error near unexpected token `FUSE,'
./configure: line 13810: ` PKG_CHECK_MODULES(FUSE, fuse)'
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have started using SPDX short identifier for license string in
<PKG>_LICENSE variable. But license strings in comments are still
using old strings. For consistency, use SPDX short identifier in
comments as well.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We add -Wno-error to not error out on warnings, which would otherwise
cause build failures.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: as suggested by Baruch, use -Wno-error instead of disabling
specific warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script check whether the underlying libc provides for
native obstack support, only building Xenomai replacement code if not.
This as been tested against uClibc 1.0.22, and common glibc releases.
Backport the patch provided by uptream.
Add XENOMAI_AUTORECONF=YES since the patch modify configure.ac.
[1] http://xenomai.org/pipermail/xenomai/2017-April/037272.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bug discovered while packaging supertux is now fixed by the previous
patch but the issue can still be present in other C++11 package if
-std=c++11 is used on PPC with Altivec vectorization.
This reverts commit d2903aaf13.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is just too
small for at91sam9x5ek_mmc_dev_defconfig, which has a lot of extra
packages for development.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Only 65MB is used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for firefly_rk3288_demo_defconfig. Indeed, the ext2 filesystem contains
the mali blob (90MB) and Qt5 (14MB), totalling to 125MB.
This is a bit too small to fit comfortably on a 128M flash driver, so
increase the size to 250000K (245MB).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit c6bca8cef0 removed autocalculation of the ext2 filesystem
size, the default size is now set to 60MB. However, this is too small
for pc_x86_64_bios_defconfig. Indeed, the ext2 filesystem contains the
kernel (4MB), the wireless modules (4MB), all firmware for wireless
modules (40MB), and the wifi userspace (9MB) and the udev hwdb (5MB)
which brings the total to 70MB.
Increase the filesystem size to 120000K, which is a nice and round
number and leaves enough space for overhead on a 128MB flash drive.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As per section 12.2 "Complying with the Buildroot license", Buildroot
is released under GPL version 2 or (at your option) any later version.
But SPDX license string for Buildroot license in section 21.5
"Submitting patches" refers to only GPL version 2. Fix this
inconsistency by using correct SPDX identifier.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses package installs a full version of clear and reset(tset)
tools. Preserve these by disabling the options in the busybox config
file. This removes the need for ncurses to depend on busybox for solely
ordering of target install.
This commit resolves the following python circular dependency with python.
busybox -> libselinux -> python3 -> ncurses -> busybox
Fixes:
http://autobuild.buildroot.net/results/db1/db1e6f3054092fc5576ccab8e04a3b9d74ca9a8c/
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The trinity configure script looks into a host header to check for libc/kernel
headers conflict resolution. This is not compatible with cross compilation.
Add a patch that does direct compilation test instead.
This issue was not caught by the autobuilder yet.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When debugging hidden dependencies, the build order is very important.
Most notably, it is interesting to identify potential culprits.
Add a new top-level rule, show-biuld-order, that dumps all the packages
in the order they would get built.
Note that there are a few differences with show-targets:
- more packages are reported, becasue show-targets does not report
host packages that have no prompt;
- the output is line-based, because we're using $(info $(1)); getting
a single output line like show-targets would require we use an
actual command, like printf '%s ' $(1); but that takes a lot of
time, while $(info $(1)) is almost instantaneous (the time to parse
the Makefiles);
- rootfs targets are not reported.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for atest application, which is useful for testing
alsa kernel drivers and detecting if playback/capture work correct
without artifacts, such as channel swap.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: add missing Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for libgphoto2 core library designed to allow access to
digital camera.
Signed-off-by: Kevin JOLY <kevin.joly@sensefly.com>
Cc: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use downloads.sourceforge.net
- Remove final dot at end of <pkg>_LICENSE variable
- Minor tweaks in comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use two official kernel patches to add support for gcc 5:
commit 71458cfc782eafe4b27656e078d379a34e472adf
kernel: add support for gcc 5
commit aeea3592a13bf12861943e44fc48f1f270941f8d
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Security Fixes:
- rndc "" could trigger an assertion failure in named. This flaw is
disclosed in (CVE-2017-3138). [RT #44924]
- Some chaining (i.e., type CNAME or DNAME) responses to upstream
queries could trigger assertion failures. This flaw is disclosed in
CVE-2017-3137. [RT #44734]
- dns64 with break-dnssec yes; can result in an assertion failure. This
flaw is disclosed in CVE-2017-3136. [RT #44653]
- If a server is configured with a response policy zone (RPZ) that
rewrites an answer with local data, and is also configured for DNS64
address mapping, a NULL pointer can be read triggering a server
crash. This flaw is disclosed in CVE-2017-3135. [RT #44434]
- A coding error in the nxdomain-redirect feature could lead to an
assertion failure if the redirection namespace was served from a
local authoritative data source such as a local zone or a DLZ instead
of via recursive lookup. This flaw is disclosed in CVE-2016-9778.
[RT #43837]
- named could mishandle authority sections with missing RRSIGs,
triggering an assertion failure. This flaw is disclosed in
CVE-2016-9444. [RT #43632]
- named mishandled some responses where covering RRSIG records were
returned without the requested data, resulting in an assertion
failure. This flaw is disclosed in CVE-2016-9147. [RT #43548]
- named incorrectly tried to cache TKEY records which could trigger an
assertion failure when there was a class mismatch. This flaw is
disclosed in CVE-2016-9131. [RT #43522]
- It was possible to trigger assertions when processing responses
containing answers of type DNAME. This flaw is disclosed in
CVE-2016-8864. [RT #43465]
Full release notes:
ftp://ftp.isc.org/isc/bind9/9.11.0-P5/RELEASE-NOTES-bind-9.11.0-P5.html
Also, remove --enable-rrl configure option from bind.mk as it doesn't
exist anymore.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a config option for enabling/disabling SMP
in Xenomai userspace in version 3.x
Enabled by default.
Signed-off-by: Pawel Sikora <sikor6@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: implement minor tweaks suggested by Thomas DS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option choice for Cobalt or Mercury core
depending on option BR2_LINUX_KERNEL_EXT_XENOMAI.
Signed-off-by: Pawel Sikora <sikor6@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout at mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a follow-up error with this defconfig
http://autobuild.buildroot.net/results/642/6422adeef19ec547c7bc3f8ad3b0d51702015240/
which occurs after disabling inline mmx with the previous patch:
This is the error message:
fmpeg/libavcodec/libavcodec.a(apedec.o): In function `ape_decode_frame':
apedec.c:(.text+0x1df5): undefined reference to `avpriv_emms_yasm'
ffmpeg/libavcodec/libavcodec.a(asvdec.o): In function `decode_frame':
asvdec.c:(.text+0x77c): undefined reference to `avpriv_emms_yasm'
ffmpeg/libavcodec/libavcodec.a(bink.o): In function `decode_frame':
bink.c:(.text+0x2809): undefined reference to `avpriv_emms_yasm'
ffmpeg/libavcodec/libavcodec.a(dvdec.o): In function `dvvideo_decode_frame':
dvdec.c:(.text+0x575): undefined reference to `avpriv_emms_yasm'
ffmpeg/libavcodec/libavcodec.a(ffv1dec.o): In function `decode_slice':
ffv1dec.c:(.text+0x3110): undefined reference to `avpriv_emms_yasm'
ffmpeg/libavcodec/libavcodec.a(h264.o):h264.c:(.text+0xea8): more undefined references to `avpriv_emms_yasm' follow
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mod_redis module enables ProFTPD support for caching data in Redis
servers, using the hiredis client library. This is available since
proftpd-1.3.6rc5 and later.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A long time ago, the blind config option BR2_LINUX_KERNEL_UBOOT_IMAGE
was introduced to be able to trigger the linux -> host-uboot-tools
dependency. Back in those days, there was no user-configurable
BR2_PACKAGE_HOST_UBOOT_TOOLS.
Now, however, it is possible to select a custom kernel image name that
needs uboot-tools, and manually enable BR2_PACKAGE_HOST_UBOOT_TOOLS. In
this case, however, the linux -> host-uboot-tools is missed and the
build is not reproducible. An example of such a situation is the
upcoming CI40 defconfig.
As a solution, remove BR2_LINUX_KERNEL_UBOOT_IMAGE entirely. Instead,
just select BR2_PACKAGE_HOST_UBOOT_TOOLS and add the dependency if it
is selected.
Note that this may introduce a redundant dependency in case the user
selected BR2_PACKAGE_HOST_UBOOT_TOOLS for some other reason (e.g. to
be able to generate a U-Boot environment to include in the image, while
the kernel is built as a zImage). However, the redundant dependency
shouldn't hurt much.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Abhimanyu Vishwakarma <abhimanyu.v@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While testing minetest with libhiredis library, the game crached due to
missing libhiredis.so.0.13 library.
The hiredis.mk doesn't use "make install" because "make install" depends
on building both the shared and static libraries, which fails in
static-only scenarios.
However, the installation logic in hiredis.mk is bogus: it installs the
library as libhiredis.so, while its SONAME is libhiredis.so.0.13. We fix
this by using the same logic as the one done by the package "make
install" process: install the library as libhiredis.so.0.13, and create
libhiredis.so as a symbolic link to it.
While at it:
- Install the library 0755, this is more common.
- Do not create $(TARGET_DIR)/usr/lib, since $(INSTALL) -D will create
the necessary directories for the destination path.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: rework to use the same installation logic as the one from
hiredis "make install".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this patch we add a couple of of-the-tree patches for u-boot.
We have an update in hardware that changed the kick-start slave cores
procedure. So these patches introduce fixes to work with new axs103
version correctly.
They have been already accepted in upstream u-boot so we need to get rid
of them as soon as these updates will get available in buildroot.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update axs10x defconfigs with the following changes:
- rename "snps_axs101_defconfig" and "snps_axs103_defconfig" to
"snps_arc700_axs101_defconfig" and "snps_archs38_axs103_defconfig",
to reflect the ARC core being used
- bump linux kernel version to 4.10.8
- set up host linux headers to 4.10
- bump u-boot version to 2017.01
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update snps_archs38_zebu_defconfig the following:
- bump linux kernel version to 4.10.9
- set up host linux headers to 4.10
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select the fsck required by systemd provided by util-linux. This
prevents ending up with fsck from busybox, which is incompatible
with systemd.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Xen to version 4.8.1 and update the patches to allow Xen
hypervisor and Xen tools to build.
The patches applied were re-aranged a little bit. Patches 2, 3 and 4
have been accepted by upstream Xen and won't be required in future
releases.
Patch 1 (previously patch 2) is still required and was moved to patch 1
to better reflect it's status.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 2010 commit 32d319e6f "gst-plugins-base: ensure <stdint.h> is used"
introduced a typo (missing backslash) that made the code ineffective.
It can be confirmed by looking at the output of:
$ make printvars | grep '^GST_PLUGINS_BASE_CONF_ENV\|^FT2_CONFIG'
FT2_CONFIG=/bin/false ac_cv_header_stdint_t="stdint.h"
GST_PLUGINS_BASE_CONF_ENV=
Add the missing backslash to fix the code.
While at it, fix the indentation to use one tab instead of two.
The (end of the) diff of config.log confirms the code is still needed
when the host has freetype-config installed:
@@ -1674,10 +1674,8 @@
configure:21882: checking for emmintrin.h
configure:21882: result: no
configure:21894: checking for stdint types
-configure:21917: /tmp/gst/output/host/usr/bin/i686-pc-linux-gnu-gcc -std=gnu99 -c conftest.c >&5
-configure:21917: $? = 0
configure:21961: result: stdint.h (shortcircuit)
-configure:22348: result: make use of stdint.h in _stdint.h (assuming C99 compatible system)
+configure:22348: result: make use of stdint.h in _stdint.h
configure:22359: checking for localtime_r
configure:22359: /tmp/gst/output/host/usr/bin/i686-pc-linux-gnu-gcc -std=gnu99 -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
configure:22359: $? = 0
@@ -2468,8 +2466,7 @@
Package 'freetype2', required by 'world', not found
configure:31257: result: no
configure:31298: checking for freetype-config
-configure:31316: found /usr/bin/freetype-config
-configure:31329: result: /usr/bin/freetype-config
+configure:31329: result: /bin/false
configure:31339: checking for FreeType - version >= 2.0.9
configure:31427: result: yes
configure:32250: creating ./config.status
@@ -2789,7 +2786,7 @@
ac_cv_objext='o'
ac_cv_path_EGREP='/bin/grep -E'
ac_cv_path_FGREP='/bin/grep -F'
-ac_cv_path_FT2_CONFIG='/usr/bin/freetype-config'
+ac_cv_path_FT2_CONFIG='/bin/false'
ac_cv_path_GMSGFMT='/tmp/gst/output/host/usr/bin/msgfmt'
ac_cv_path_GREP='/bin/grep'
ac_cv_path_MSGFMT='/tmp/gst/output/host/usr/bin/msgfmt'
@@ -2818,7 +2815,6 @@
ac_cv_prog_cxx_g='yes'
ac_cv_prog_make_make_set='yes'
ac_cv_stdint_message='using gnu compiler i686-pc-linux-gnu-gcc (Sourcery CodeBench Lite 2012.09-62) 4.7.2'
-ac_cv_stdint_result='(assuming C99 compatible system)'
ac_cv_sys_file_offset_bits='no'
ac_cv_sys_largefile_CC='no'
ac_cv_sys_largefile_source='no'
@@ -2965,9 +2961,9 @@
EXEEXT=''
FFLAGS=' -Os '
FGREP='/bin/grep -F'
-FT2_CFLAGS='-I/usr/include/freetype2'
-FT2_CONFIG='/usr/bin/freetype-config'
-FT2_LIBS='-lfreetype'
+FT2_CFLAGS=''
+FT2_CONFIG='/bin/false'
+FT2_LIBS=''
GCOV=''
GCOV_CFLAGS=''
GCOV_LIBS=''
Detected by check-package.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the default xserver_xorg-server version 1.19.x, the AIGLX option
is no longer available (cfr. commit ec502ea8e4). In fact, AIGLX is
always enabled. So remove this option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have changed the default ext2/3/4 filesystem size from automatic
to 60MB, the minnowboard_max graphical demo config doesn't fit anymore.
So increase it to double.
The exact number doesn't matter much, it has to be somewhat smaller
than 128MiB, so let's take a round number of 120000K.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to the Buildroot convention, 'depends on' attributes shall
come before 'select' ones in Kconfig files.
Detected by check-package.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host package will be needed by tvheadend.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- group the host commands together and the target commands together
- use --prefix=$(HOST_DIR)/usr for host configuration, and do not
override PREFIX= at host install time
- use DESTDIR=$(TARGET_DIR) instead of overriding PREFIX= at target
install time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit bfb8df2ad9.
With current toolchains it was not possible to trigger the bug anymore.
Tested with these settings:
BR2_i386=y
BR2_x86_i586=y
BR2_GCC_VERSION_4_8_X=y
BR2_i386=y
BR2_x86_i586=y
BR2_GCC_VERSION_5_X=y
BR2_i386=y
BR2_x86_i586=y
BR2_GCC_VERSION_6_X=y
Other x86 variants also work:
BR2_i386=y
BR2_x86_i486=y
BR2_GCC_VERSION_5_X=y
BR2_i386=y
BR2_x86_i686=y
BR2_GCC_VERSION_5_X=y
BR2_i386=y
BR2_x86_pentium_mmx=y
BR2_GCC_VERSION_5_X=y
BR2_i386=y
BR2_x86_corei7=y
BR2_GCC_VERSION_5_X=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This python utility scans the logs for messages logged when the system
denied permission for operations, and generates a snippet of policy
rules which, if loaded into policy, might have allowed those operations
to succeed. However, this utility only generates Type Enforcement (TE)
allow rules.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: adjust Config.in to propagate the dependencies of sepolgen,
checkpolicy and python3.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libselinux currently does not compile its python wrapper module for
the target. This is needed for audit2allow to function properly, and
therefore this patch adjusts libselinux.mk to install the python
wrapper module is python or python3 are enabled.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- Remove useless empty lines, as noted by Matt Weber
- Move code related to python bindings before builds/install
commands, since those commands will use variables defined by the
python bindings logic.
- Instead of enabling the python bindings when
BR2_PACKAGE_POLICYCOREUTILS_AUDIT2ALLOW is set, enable the python
bindings when python is available. We generally try to avoid
looking at options of other packages to decide what to install.
- Introduce LIBSELINUX_MAKE_TARGETS and
LIBSELINUX_MAKE_INSTALL_TARGETS variable, in order to avoid
duplicate the make/make install commands.
- As suggested by Matt Weber, remove LIBSELINUX_PYTHONLIBDIR
definitions, and don't pass PYLIBVER and PYTHONLIBDIR in MAKE_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
checkpolicy is currently a host-only package, however it is a
dependency of audit2allow. This patch allows for checkpolicy to be
compiled for the target.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- remove LIBSELINUX_INSTALL_STAGING = YES, doing it in
checkpolicy.mk is wrong, and libselinux is already installed to
staging
- add "select BR2_PACKAGE_LIBSELINUX" in Config.in, and propagate the
necessary dependencies
- add host-flex in dependencies, since it is also needed (in addition
to target flex).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sepolgen is currently a host-only package, however it is a dependency
of audit2allow. This patch allows for sepolgen to be compiled for the
target.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- fix formatting of Config.in file
- add missing dependencies inherited from the fact that the package
selects python3.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LICENSE file refers to Python license version 2. Use SPDX short
identifier for license string and add license file while at it.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create the infra to check the style of new packages before submitting.
The overall function of the script is described inside a txt file.
It is designed to process the actual files and NOT the patch files
generated by git format-patch.
Also add the first check function, to warn if a file (Config.*, *.mk,
*.hash, *.patch) has no newline at the last line of the file, see [1].
Basic usage for simple packages:
support/scripts/check-package -vvv package/newpackage/*
Basic usage for packages with subdirs:
support/scripts/check-package -vvv $(find package/newpackage/ -type f)
See "checkpackage" in [2].
[1] http://patchwork.ozlabs.org/patch/631129/
[2] http://elinux.org/Buildroot#Todo_list
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the host toolchain was used to build syslinux, as it was
not possible to build a 32-bit syslinux with a x86-64 toolchain.
However, syslinux requires gnu-efi, and gnu-efi is built using the
target toolchain. Mixing different toolchains doesn't work well, so
this commit changes the syslinux package to use the target toolchain
for syslinux as well. This is made possible by patches
0003-Fix-ldlinux.elf-Not-enough-room-for-program-headers-.patch and
0004-memdisk-Force-ld-output-format-to-32-bits.patch.
Since syslinux also contains some utilities that have to run on the
host, those have to continue being built with the host toolchain,
which requires patch 0005-utils-Use-the-host-toolchain-to-build.patch.
Patch 0006-lzo-Use-the-host-toolchain-for-prepcore.patch is about
building prepcore, another utility with the host toolchain as it is
required at build-time.
This was tested using a Buildroot's built x86_64 toolchain, and
checked that the output binaries are 32-bits. It was tested as well if
they actually boot on hardware.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch 0001-include-linux-nfs.h-directly-in-rpc_sub.patch was Git
formatted, except that a Upstream status statement was added above the
patch, which makes it unapplicable by "git am". So fix this by putting
the Upstream status statement where it should be.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to PEP 370 Python will also search for the packages in the
user site-packages directory. This can affect build reproducibility.
The solution is to use PYTHONNOUSERSITE=1 for all Python packages,
i.e. both host and target variants.
Fixes bug #9791.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need to avoid failing of copy of custom dts using cp -f <>
command. So, just qstrip the variable as is done for other
configuration options.
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- This version requires a patch (sent upstream) to remove -lanl from
all Linux builds as this library is only needed for adns support
- sha512 must be computed locally as eclipse.org does not give it for
this version
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I'm no longer with Imagination Technologies. Update email address to an
active one.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
License.html now just contains the string:
The ICU license is now in plain text format, see <a href="./LICENSE">LICENSE</a>.
Update links and software appropriately.
So refer directly to that file instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LICENSE.TXT gives an overview and explains in detail that freetype is dual
licensed under the FTL and GPLv2+, so also include it in the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 2010 commit 32d319e6f "gst-plugins-base: ensure <stdint.h> is used"
introduced a typo (missing backslash) that made the code ineffective.
In 2013 commit f8e7fdcd3 "gst1-plugins-base: add gstreamer1 base
plugins" copied the code.
It can be confirmed by looking at the output of:
$ make printvars | grep '^GST1_PLUGINS_BASE_CONF_ENV\|^FT2_CONFIG'
FT2_CONFIG=/bin/false ac_cv_header_stdint_t="stdint.h"
GST1_PLUGINS_BASE_CONF_ENV=
Direct use of freetype was dropped in version 1.7.2 by upstream [1], so
remove the code instead of fixing it.
Found using [2]:
check-package --include-only Indent $(find * -type f)
and manually removed.
[1] https://cgit.freedesktop.org/gstreamer/gst-plugins-base/commit/?id=183610c035dd6955c9b3540b940aec50474af031
[2] http://patchwork.ozlabs.org/patch/729669/
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the hash is not checked, returning this message:
WARNING: no hash file for pylibftdi-0.15.0.tar.gz
Rename the .hash file to use the package name.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ba6bac1383 made a change in copying of
the dynamic loader, with the goal of reducing toolchain-specific fixups.
Any ld*.so file found in the toolchain's lib directory would be copied to
the staging/lib directory.
For the toolchains that previously needed fixup, this new behavior is fine.
The reason they needed fixup was that the normal copy action did not include
any dynamic loader.
However, for certain other toolchains this new behavior actually breaks
things: regardless of ARCH_LIB_DIR, which may be lib64 instead of lib, the
dynamic loader from lib is copied _over_ any previously correct dynamic
loader.
This has been witnessed with the CodeSourcery x86_64 and
CodeSourcery MIPS64 toolchains. In both cases, a 32-bit dynamic loader was
copied to staging/lib, while a 64-bit version was expected.
Fix the problem by only performing this explicit dynamic loader copy if no
dynamic loader is found in staging/lib.
Fixes http://autobuild.buildroot.net/results/8bf/8bffe54032aad9cc710a22411ef3bff4a2c93e55/
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds an easy way to select the CIP project SLTS
kernel within the kernel menu.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas: remove BR2_CIP_KERNEL_REPO_URL option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update snps_archs38_vdk_defconfig with the
following:
- bump linux kernel version to 4.10.8
- set up host linux headers to 4.10
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our patch adding nios2 support to libnspr uses the built-in compiler
define "nios2". However, this doesn't work with C++11, where only the
__nios2__ define is available. Since __nios2__ is always available,
use that instead:
$ ./output/host/usr/bin/nios2-linux-gcc -dM -E - < /dev/null | grep -E "( nios2 | __nios2__ )"
$ ./output/host/usr/bin/nios2-linux-gcc -std=c++11 -x c++ -dM -E - < /dev/null | grep -E "( nios2 | __nios2__ )"
Patch 0001-nios2.patch is therefore changed to use __nios2__ (the rest
of the change noise is due to using quilt to format the patch). Patch
0002-microblaze.patch is simply updated to apply correctly on top of
the modified 0001-nios2.patch.
This fixes the build of the poppler library on nios2. It is built with
-std=c++11, and includes nspr headers (through nss), causing a build
issue.
Fixes:
http://autobuild.buildroot.net/results/9fee58076157d814616fa0da51afde8da21a8973/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a mistake, the Microblaze patch was adding another #elif
defined(nios2), which doesn't make any sense. This commit gets rid of
it.
The rest of the noise in the change is due to the use of quilt to
generate the patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the addition of more patches to the syslinux
package, reformat the two existing patches as proper Git formatted
patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
copy_toolchain_lib_root handles symlinks by recreating them, disregarding
the original destination and assuming the destination is in the same
directory as the link itself.
When a library link points to the real library file in another directory,
for example:
usr/lib/octeon2/libcrypt.so -> ../../../lib32/octeon2/libcrypt.so.1
then the link created by copy_toolchain_lib_root is broken.
It is more robust to copy the symlink to keep the destination intact. The
destination path should be present, possibly through other symbolic links.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The input to copy_toolchain_lib_root is not one library, not a list of
libraries, but a library name pattern with glob wildcards.
This pattern is then passed to 'find' to get the actual list of libraries
matching the pattern. Reflect this using an appropriate variable name.
Note: if the root of the buildroot tree contains a file matching one of
these library patterns, the copying of libraries from staging to target will
not be correct. It is not impossible to fix that, e.g. using 'set -f', but
maybe it's not worth it.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
copy_toolchain_lib_root has slightly different logic depending on the type
of library object: file or link. All actions related to links are not
relevant in case you are working with a file. Hence, try to increase clarity
by not executing unnecessary lines in the 'file' case.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A previous commit rewrote broken symbolic links in staging, caused by a
non-singular ARCH_LIB_DIR. In this case, the symbolic links are typically
using one or more intermediate directory symlinks, which can be simplified
using the newly introduced simplify_symlink helper.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external toolchain logic flattens the directory layout in the staging
directory. Regardless of the number of levels present in the extracted
toolchain, libraries are always copied to lib/ and usr/lib/, and directory
symbolic links are provided to make the original paths available as well.
Due to this, the same library may be reachable through a number of paths:
one path without any symbolic link, and one or more paths using directory
symlinks.
Using a direct path in a symlink destination is generally preferred because
it is clearer, but it is also more robust against accidental removal of an
intermediate directory symlink.
Introduce a helper function to simplify a symlink's destination to such a
direct path. This function will be used in a subsequent patch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain from the Cavium Octeon SDK has a sysroot layout as follows:
./lib32
./lib32/octeon2
./lib32-fp
./lib64
./lib64/octeon2
./lib64-fp
./usr
./usr/lib
./usr/lib32
./usr/lib32/octeon2
./usr/lib32-fp
./usr/lib64
./usr/lib64/octeon2
./usr/lib64-fp
./usr/bin
./usr/bin32
./usr/bin32-fp
./usr/bin64-fp
./usr/libexec
./usr/libexec32
./usr/libexec32-fp
./usr/libexec64-fp
./usr/sbin
./usr/sbin32
./usr/sbin32-fp
./usr/sbin64-fp
./usr/include
./usr/share
./sbin
./sbin32
./sbin32-fp
./sbin64-fp
./etc
./var
with the following selections:
- lib64 : default
- lib64/octeon2 : -march=octeon2
- lib64-fp : -march=octeon3
- lib32 : -mabi=n32
- lib32/octeon2 : -mabi=n32 -march=octeon2
- lib32-fp : -mabi=n32 -march=octeon3
In case of '-mabi=n32 -march=octeon2' (but same is true for n64+octeon2)the
original Buildroot toolchain logic would copy both the libraries in
lib32 as the subdirectory lib32/octeon2, which means that every library is
installed twice (but only one of each is really needed).
While ARCH_LIB_DIR is determined by the location of libc.a, which in this
case is effectively:
<sysroot>/usr/lib32/octeon2/libc.a
the variable only retains 'lib32' and not 'lib32/octeon2' as expected.
To make Buildroot cope with this style of toolchain layout, we need to adapt
the calculation of ARCH_LIB_DIR to also include the second part.
This, in turn, means that ARCH_LIB_DIR is no longer guaranteed to be a
singular path component, resulting in some additional changes.
Certain older Linaro toolchains actually had the same layout. Libraries were
located in lib/<tuple> rather than lib directly. Previously, this was
handled by adding a toolchain-specific fixup that creates a symlink
lib/<tuple> -> lib, but with this patch this would no longer be needed.
Note that one difference with the Octeon case is that these Linaro
toolchains are not actually multilib, i.e. there is just one location with
the libraries and thus there is no problem with duplicated libraries.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The helper function copy_toolchain_sysroot has some logic to transform a
path into a number of '../' components based on the depth of that path.
As this same logic will be needed in another place in a subsequent patch,
extract it into a separate helper relpath_prefix.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally, the Buildroot toolchain logic copies all required libraries from
the external toolchain to the staging directory, including the dynamic
loader ld-*.so.
There are cases, however, where the dynamic loader is _not_ automatically
copied to staging. This happens when the dynamic loader is not inside
ARCH_LIB_DIR itself (e.g. lib64), but instead resides in 'lib' (assume, of
course, that ARCH_LIB_DIR != 'lib').
Currently, this is fixed in a toolchain-specific fixup, e.g. by recreating a
missing symlink or copying over a missing file. Such toolchain specific
fixups are not very nice.
Moreover, in a subsequent patch, the value of ARCH_LIB_DIR changes for some
toolchains, causing them to have the same problem of a missing dynamic
loader. This used to be the case for older Linaro toolchains with libraries
in 'lib/<tuple>': Buildroot used to set ARCH_LIB_DIR=lib but the mentioned
patch changes it to 'lib/<tuple>' instead. As a result, the files directly
under 'lib/' will no longer be copied. There should be none, but the dynamic
loader is a notable exception.
[Note: support for these older Linaro toolchain has been removed in 2016.11]
Instead, copy over the ld.so file(s)/link(s) from the extracted toolchain
into staging, in the central copy_toolchain_sysroot function. The existing
toolchain logic will then handle the copy of these files from staging to
target.
This means the toolchain-specific fixups can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The copy_toolchain_sysroot helper features a complex rsync loop that copies
various directories from the extracted toolchain to the staging directory.
The complexity mainly stems from the fact that we support multilib toolchain
tarballs but only copy one of the multilib variants into staging.
Increase understandability of this logic by explicitly restricting the
rsync excludes to the iteration of the for loop they are relevant for.
Additionally, update the function comment.
Note: all attempts to reduce duplication between both rsync while keeping
things nice and readable failed. One has to be extremely careful regarding
line continuation, indentation, and single vs double quoting. In the end, a
split up rsync seemed most clean.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the bump to version 2.6, the following commit needs
to be taken into consideration for overloading paths.
8162f10e67
The PYLIBVER is no longer used and the PYTHONLIBDIR is
renamed to PYSITEDIR with slightly different pathing.
More details can be found in the issue ticket which was
marked as a non-issue after analysis that a Buildroot fix
was the resolution.
https://github.com/SELinuxProject/selinux/issues/51
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libav version built into the gst-ffmpeg code produces a bogus
binary on SPARC, which causes the following error of the
check-bin-arch script:
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpeg.so is Sparc v8+, should be Sparc
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstpostproc.so is Sparc v8+, should be Sparc
ERROR: architecture for ./usr/lib/gstreamer-0.10/libgstffmpegscale.so is Sparc v8+, should be Sparc
The problem is the following bit of code in
gst-lib/ext/libav/configure:
elif enabled sparc; then
enabled vis && check_asm vis '"pdist %f0, %f0, %f0"' -mcpu=ultrasparc &&
add_cflags -mcpu=ultrasparc -mtune=ultrasparc
I.e, it checks if the architecture supports the pdist
instruction... but forces -mcpu to ultrasparc while doing so. So it's
like "let's see if this Ultrasparc instruction exists when I force the
compiler to think I'm using Ultrasparc", which is non-sensical. This
has been fixed later on in libav upstream:
https://git.libav.org/?p=libav.git;a=commit;h=6aa93689abe8c095cec9fa828c2dee3131008995
However, this commit cannot be backported as-is since the shell
function check_inline_asm did not exist in the old libav version
bundled in gst-ffmpeg.
Therefore, we take the simpler route of disabling the VIS
optimizations on SPARCv8 and Leon3.
Fixes:
http://autobuild.buildroot.net/results/e82d179c3d4f92ad7423693a4b1d42379a3f5411/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have two patches that address the ln --relative issue
differently. The first one changes the behaviour to generate absolute
symlinks, which is incorrect; the second provides an ad-hoc solution
for a single case.
Replace both of them with a single patch that mimics ln --relative when
the host ln does not support it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upstream tarball isn't available, no releases since ten years. The
latest change to upstream git is from 2014. Better use rpcbind for any
RPC portmapper service.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: make the legacy option select rpcbind, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have switched to binutils 2.27 as the default binutils
version, it's time to get rid of binutils 2.25. So this commit remove
the 2.25 version choice, the hash file entry, the patches, and adds a
Config.in.legacy option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.28 is available, switch to binutils 2.27 as the
default version, for both the host variant and the target variant. Note
that the target variant, when no host variant is built, was still
2.25.1: we forgot to update it to 2.26 when the host version was updated
to 2.26.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d8878112ad ("binutils: remove
deprecated 2.24.X") removed support for binutils 2.24, but forgot to
remove the hash from binutils.hash. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Patch 0100-elf32-arm-no-data-fix.patch is upstream as of commit
6342be709e8749d0a44c02e1876ddca360bfd52f, so it is removed.
- Patch 0130-tc-xtensa.c-fixup-xg_reverse_shift_count-typo.patch is
upstream as of commit 78fb7e37eb8bb08ae537d6c487996ff17c810332, so
it is removed.
- Patch
0900-Revert-part-Set-dynamic-tag-VMA-and-size-from-dynami.patch is
upstream as of commit c646b02fdcae5f37bd88f33a0c4683ef13ad5c82, so
it is removed.
- All other patches are kept, just refreshed to apply cleanly on the
new binutils version.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because dc3dd is being autoreconfigured and comes with an old gettext
infra, gettextize needs to be called so that the infra is updated to
match the newer version used in Buildroot.
Commit b36d57fab included a patch to add the definition of MKDIR_P to
po/Makefile.in.in in order to fix autobuild failures that ocurred when
host-gettext was built before dc3dd. This patch is no longer necessary
as gettextize adds a new Makefile template which contains the needed
definition, so drop it.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LICENSE file refer to PHP license version 3.01. License header in all
source files refer to PHP license version 3.01 except source files for
fastlz library which is provided under MIT license and g_fmt.{c,h}
which has ISC-like license header.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following review of libmaxminddb patch by Thomas Petazzoni, here is an
enhanced version of the --disable-tests patch which has been sent
upstream.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building synergy on sparc, nios2, mipsel and mips64el would fail with
the following errors:
src/lib/ipc/IpcClientProxy.cpp: In member function 'void IpcClientProxy::send(const IpcMessage&)':
src/lib/ipc/IpcClientProxy.cpp:150:59: error: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second: [-Werror]
ProtocolUtil::writef(&m_stream, kIpcMsgLogLine, &logLine);
^
In file included from src/lib/ipc/IpcClientProxy.cpp:23:0:
src/lib/ipc/../synergy/ProtocolUtil.h:82:16: note: candidate 1: static void ProtocolUtil::writef(void*, const char*, va_list)
static void writef(void*, const char* fmt, va_list);
^
src/lib/ipc/../synergy/ProtocolUtil.h:53:16: note: candidate 2: static void ProtocolUtil::writef(synergy::IStream*, const char*, ...)
static void writef(synergy::IStream*,
^
src/lib/ipc/../synergy/ProtocolUtil.h:82:16: error: 'static void ProtocolUtil::writef(void*, const char*, va_list)' is private
static void writef(void*, const char* fmt, va_list);
^
src/lib/ipc/IpcClientProxy.cpp:150:59: error: within this context
ProtocolUtil::writef(&m_stream, kIpcMsgLogLine, &logLine);
^
At global scope:
cc1plus: error: unrecognized command line option '-Wno-unused-local-typedef' [-Werror]
cc1plus: all warnings being treated as errors
Fixed by upstream commits:
c31f908fb22643cea67b
Fixes:
http://autobuild.buildroot.net/results/dc40671874aac9ad491bd4c7aa57eb1c53484492http://autobuild.buildroot.net/results/a37905b0c93aa0dc891a85be1701e51cf2988cbehttp://autobuild.buildroot.net/results/611895e29faba0b35b2b27005a5142192ed63fd8http://autobuild.buildroot.net/results/7bdd4428c1335593b04a18ce8e9705b0bc932484
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
C library for the MaxMind DB file format
The libmaxminddb library provides a C library for reading
MaxMind DB files, including the GeoIP2 databases from MaxMind.
This is a custom binary format designed to facilitate fast
lookups of IP addresses while allowing for great flexibility
in the type of data associated with an address.
The MaxMind DB format is an open format. The spec is available
at http://maxmind.github.io/MaxMind-DB/. This spec is licensed
under the Creative Commons Attribution-ShareAlike 3.0 Unported
License.
http://maxmind.github.io/libmaxminddb
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for libpng license is Libpng.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for OFLv1.0/OFLv1.1 is OFL-1.0/OFL-1.1.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/OFLv([1]\.[0-1])/OFL-\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove complicated DIEHARDER_POST_PATCH_FIXUP that replaces bogus
libtool .m4 files: since we are anyway autoreconfiguring the
package, this is not necessary. And therefore, remove host-libtool
in the dependencies.
- use GPL-2.0 instead of GPLv2
- add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While currently there is no in-tree Buildroot package which depends on
host-python-lxml, we (DATACOM) have some proprietary modules that use it
in their test scripts.
We tested python-lxml as host package and confirmed that it builds and
works correctly. Someone else might require it, so we are proposing its
inclusion.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add Config.in.host entry.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
.pyc files include path to source .py file. This patch changes the way
`pycompile.py' is launched in order to only keep the part relative to
$TARGET_DIR.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
.pyc files include path to source .py file. This patch changes the way
`pycompile.py' is launched in order to only keep the part relative to
$TARGET_DIR.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ncurses 6.0 has been out for a while now (August 8th 2015!), so this
patch brings us up to the latest version.
- The first patch is no longer needed as it was fixed in the new
release.
- The other two packages are still applicable, so they have been
updated to apply properly on the new ncurses version.
- A new option: --with-pkg-config-libdir has been added. Without it
pkg files wouldn't install to the correct location.
- NCURSES_ABI_VERSION is no longer needed, as there is only 6.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compiling Qemu statically allows to use it to chroot into target/. It is a
nice feature, so add an option for it.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: slightly tweak Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While testing on a PC target with an HD6310 graphic card, the
OpenGL support was in "compat profile" mode (i.e OpenGL 2.1).
Extended renderer info (GLX_MESA_query_renderer):
Vendor: X.Org (0x1002)
Device: AMD PALM (DRM 2.49.0 / 4.10.4) (0x9802)
Version: 17.0.2
Accelerated: yes
Video memory: 256MB
Unified memory: no
Preferred profile: compat (0x2)
Max core profile version: 0.0
Max compat profile version: 2.1
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 2.0
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD PALM (DRM 2.49.0 / 4.10.4)
OpenGL version string: 2.1 Mesa 17.0.2
OpenGL shading language version string: 1.30
OpenGL ES profile version string: OpenGL ES 2.0 Mesa 17.0.2
OpenGL ES profile shading language version string: OpenGL ES GLSL ES 1.0.16
It turn out that texture float support was missing...
Extended renderer info (GLX_MESA_query_renderer):
Vendor: X.Org (0x1002)
Device: AMD PALM (DRM 2.49.0 / 4.10.4) (0x9802)
Version: 17.0.2
Accelerated: yes
Video memory: 256MB
Unified memory: no
Preferred profile: core (0x1)
Max core profile version: 3.3
Max compat profile version: 3.0
Max GLES1 profile version: 1.1
Max GLES[23] profile version: 3.0
OpenGL vendor string: X.Org
OpenGL renderer string: Gallium 0.4 on AMD PALM (DRM 2.49.0 / 4.10.4)
OpenGL core profile version string: 3.3 (Core Profile) Mesa 17.0.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
OpenGL core profile profile mask: core profile
OpenGL version string: 3.0 Mesa 17.0.2
OpenGL shading language version string: 1.30
OpenGL context flags: (none)
Add a new option to let the user disable this feature if
it doesn't comply to the SGI license.
Add docs/patents.txt to MESA3D_LICENSE_FILES
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- rewrap Config.in help text
- add note that not all drivers are affected by the texture float
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script is a wrapper for the genimage tool used by most boards.
The board postimage script can now call this script instead of invoking
genimage command themselves.
Signed-off-by: Etienne Phelip <etienne.phelip@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A buildroot package for physfs has recently been added, and if it is
detected by sdl_sound's configure it enables code in the simple
player which fails to build (if the player is enabled).
(The build problem is due to physfs renaming a macro which has not been
reflected in sdl_sound.)
So, add the physfs dependency to the package information and correct
the build problem with a patch taken from Arch Linux, where they seem
to have already found and fixed this issue.
Fixes:
http://autobuild.buildroot.net/results/ae5839b978244c434dd86d49b672c437a7b19a66
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for zlib license is Zlib.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/zlib( )?(license)?/Zlib/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for Boost Software License 1.0 is BSL-1.0.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for AFLv2.1 is AFL-2.1.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/AFLv2.1(\+)?/AFL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GFDLv1.1/GFDLv1.2/GFDLv1.3 is GFDL-1.1/
GFDL-1.2/GFDL-1.3.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/GFDL(v)?([1]\.[1-3])(\+)?/GFDL-\2\3/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for MPLv1.0/MPLv1.1/MPLv2.0 is MPL-1.0/MPL-1.1/
MPL-2.0.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/MPLv([1-2]\.[0-1])/MPL-\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for Apache version 2 license is Apache-2.0.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-4c is BSD-4-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-4c/BSD-4-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-2c is BSD-2-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-2c/BSD-2-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for BSD-3c is BSD-3-Clause.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/BSD-3c/BSD-3-Clause/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2/LGPLv2+ is LGPL-2.0/LGPL-2.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2(\+)?/LGPL-2.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for AGPLv3 is AGPL-3.0.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/AGPLv3/AGPL-3.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv3/LGPLv3+ is LGPL-3.0/LGPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv3(\+)?/LGPL-3.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for LGPLv2.1/LGPLv2.1+ is LGPL-2.1/LGPL-2.1+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/LGPLv2.1(\+)?/LGPL-2.1\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license string as much as possible.
SPDX short identifier for GPLv3/GPLv3+ is GPL-3.0/GPL-3.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv3\>/GPL-3.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for license strings as much as possible.
SPDX short identifier for GPLv2/GPLv2+ is GPL-2.0/GPL-2.0+.
This change is done by using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/\<GPLv2\>/GPL-2.0/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX identifier for licenses as much as possible. SPDX
short identifier for GPLv1/GPLv1+ is GPL-1.0/GPL-1.0+.
This change is done using following command.
find . -name "*.mk" | xargs sed -ri '/LICENSE( )?[\+:]?=/s/GPLv1(\+)?/GPL-1.0\1/g'
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We want to use SPDX short identifier for license string as much as
possible. So refer to SPDX license list and use SPDX short identifier
for license strings in documentation.
Also remove License abbreviations that we have.
Signed-off-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
[Thomas: take into account suggestions from Arnout.]
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by André Hentschel <nerv@dawncrow.de>, commit
6520762932 ("python: move to Git formatted
patches") mistakenly removed 018-fix-add-gcc-paths-logic.patch.
This causes bug #7971 to re-appear. To fix this, we re-introduce the
missing patch.
Reported-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Take Debian adapted patches of upstream.
Fixes:
CVE-2017-6004: crafted regular expression may cause denial of service
CVE-2017-7186: invalid Unicode property lookup may cause denial of service
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This comment was added in 2007 (e4c6340a: cleanup and fixes), back when
removing a package was (seemingly) supported.
This ability was lost when coreutils was converted to autotarget in 2010
(386183f: coreutils: convert to autotarget), but the comment stuck.
Get rid of it: it nowadays does not make sense and is a bit confusing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Whitespaces were searched using the following regex:
[ ]{1,}\t
and then manually removed in most of the cases. For
xserver_xorg-server.mk, tabs before backslashes were removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_SYSTEM_BIN_SH hidden option defines to what binary the /bin/sh
symlinks should point to. If busybox is chosen, then /bin/sh is created
to point to /bin/busybox.
This works fine with the default installation mode of Busybox, but it
fails with the upcoming "individual binaries" mode, in which each applet
is installed as its own binary, and /bin/busybox doesn't exist: we get
/bin/sh as a broken symlink to /bin/busybox.
Since Busybox already installs its own /bin/sh symlink, properly
pointing to /bin/ash or /bin/hush depending on the selected shell, it
doesn't make sense for the BR2_SYSTEM_BIN_SH logic to override
this. Just let Busybox install its own /bin/sh by making
BR2_SYSTEM_BIN_SH empty when Busybox shell is selected as /bin/sh.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We actually prefer the version 7.2.641 (over 7.2.646) as the
content of the release is identical and the 641 has the advantage
of providing a proper .tar.xz file.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The project moved from SourceForge to GitHub.
The buildsystem changed from autotools to CMake.
Removed patches:
- 0001-includes.patch
Not needed anymore, was fixed upstream.
- 0002-remove-werror.patch
Autotools patch, no longer applicable.
- 0003-Fix-build-with-gcc-6.patch
This patch was applied upstream:
3d963bfbe7
Add patch to disable building of tests and allow building without gtest.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the output of printvars copntains the name of the variable,
its expanded value and its un-expanded value.
However, most of the time, we need the actual, expanded value, so it can
be re-used from a (non-Buildroot) infrastructure script, like a
post-build script, or a build-farm driver (e.g. a Jenkins job...)
Add two options that a user may set to change the output of printvars:
- QUOTED_VARS, if set, will quote the value
- RAW_VARS, if set, will print the unexpanded value
The new output by default only prints the expanded value now.
So that it can be used as such:
$ make -s printvars VARS=BUSYBOX_VERSION
BUSYBOX_VERSION=1.26.2
$ make -s printvars VARS=BUSYBOX_RDEPENDENCIES QUOTED_VARS=YES
BUSYBOX_RDEPENDENCIES='ncurses util-linux'
$ make -s printvars VARS=BUSYBOX_FINAL_PATCH_DEPENDENCIES RAW_VARS=YES
BUSYBOX_FINAL_PATCH_DEPENDENCIES=$(sort $(BUSYBOX_PATCH_DEPENDENCIES))
And it is even possible to directly evaluate it in a shell script:
eval $(make -s printvars VARS=BUSYBOX_VERSION QUOTED_VARS=YES)
Backward compatibility of the output is not maintained. It is believed
that scripts that depended on the previous output were very fragile to
begin with, because they had to filter the non-formatted output
(splitting on spaces or braces was not really possible, because values
could contain either).
Document printvars and its options in the manual; list it in the output
of 'make help'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with glibc 2.25, the proc_service.h header has been copied
from gdb to glibc so other tools can use it. However, that makes it
necessary to make sure that declaration of prfpregset_t declaration
is consistent between gdb and glibc. In gdb, however, there is a
workaround for a broken prfpregset_t declaration in glibc 2.3 which
uses AC_TRY_RUN to detect if it's needed, which doesn't work in
cross-compilation. So pass the cache option to configure.
It needs to be passed to GDB_CONF_ENV to build gdbserver only but
also to GDB_MAKE_ENV, because otherwise it does not get passed to the
configure script of nested packages while building gdbserver with full
debugger.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In glibc 2.25, the proc_service.h header was copied from gdb to glibc.
However, in the process the 'const' was removed, which leads to build
failures with glibc >= 2.25.
gdb 7.12.1 already contains this patch. The patch for 7.11.1 comes
straight from upstream, the patch for 7.10.1 is backported by me.
Fixes http://autobuild.buildroot.net/results/6b1b44e72147113b3f0e3f049cb9026d6c7dffb7
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package version of syslog-ng is 3.9.1.
Bumping version number in syslog-ng.conf to 3.9
Fixing warning message about configuration file being too old.
Signed-off-by: Pawel Sikora <sikor6@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following gdb-7.12.1 build error on xtensa architecture:
gdb/xtensa-linux-nat.c: In function 'void fetch_gregs(regcache*, ptid_t, int)':
gdb/xtensa-linux-nat.c:178:23: error: uninitialized const 'regs' [-fpermissive]
const gdb_gregset_t regs;
Backported from: d274ecf4ddf76768af57e27f654b9ce6784b391c
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In particular this includes commit d63e12a "nvram:read list of partion
names dynamically" which fixes an issue preventing the nvram tool from
writing to certain partitions.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcsc-lite installs systemd service files, but they are not used.
Enable pcscd.socket so that systemd starts the daemon when the
first client connects.
Signed-off-by: Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7f4e9490b6 (package/mesa3d: remove sha1 external dependency)
removed the --with-sha1 logic from mesa3d.mk, but didn't remove the
corresponding logic / comment from Config.in.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-2619:
All versions of Samba prior to 4.6.1, 4.5.7, 4.4.11 are vulnerable to
a malicious client using a symlink race to allow access to areas of
the server file system not exported under the share definition.
Samba uses the realpath() system call to ensure when a client requests
access to a pathname that it is under the exported share path on the
server file system.
Clients that have write access to the exported part of the file system
via SMB1 unix extensions or NFS to create symlinks can race the server
by renaming a realpath() checked path and then creating a symlink. If
the client wins the race it can cause the server to access the new
symlink target after the exported share path check has been done. This
new symlink target can point to anywhere on the server file system.
This is a difficult race to win, but theoretically possible. Note that
the proof of concept code supplied wins the race reliably only when
the server is slowed down using the strace utility running on the
server. Exploitation of this bug has not been seen in the wild.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unextected error in the br2-external script are properly caught, but
they are not reported properly, and we end up in either of two
situations:
- the .br2-external.mk file is not generated, in which case make will
try to find a rule to generate it (because the 'include' directive
tries to generate missing files);
- the .br-external.mk file is generated but does not contain the error
variable, and thus the build might not get interrupted.
We fix that by using a trap on the pseudo ERR signal, to emit the error
variable on unexpected errors.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
taglib is dual licensed under LGPLv2.1 or MPLv1.1. Almost all source
files have license text mentioning LGPLv2.1 or alternatively MPLv1.1.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: use MPL-1.1 instead of MPLv1.1, since MPL-1.1 is the SPDX
license code for this license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
{TARGET,HOST}_CONFIGURE_OPTS are currently passed as $(MAKE) argument,
which causes some CPPFLAGS/CFLAGS defined by the package build system to
be overridden, leading to build failures. This commit changes the lz4
package to pass {TARGET,HOST}_CONFIGURE_OPTS through the environment to
avoid this issue.
Fixes:
http://autobuild.buildroot.net/results/2a578a9c462463fde802c999156723494fe1b14d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we have four packages that need to use the Xtensa overlay:
binutils, gcc-initial, gcc-final and gdb. However, they all use three
different ways to check for, and use the overlay. Furthermore, two of
them define the same variable: XTENSA_CORE_NAME is defined both by
binutils and gdb
In order to sanitise that, have the Xtensa architecture export the
appropriate variables: the name of the core and the path to the overlay
tarball. Packages can then check and use those variables.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check_arm_abi function takes as second argument the path to the
cross-readelf, but does not use it. Therefore, this commit gets rid of
this unnecessary argument.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current test to verify if the toolchain uses musl or not is based on
checking if /lib/libc.so or /lib/libm.so exist in the sysroot. However,
some toolchains (notably Crosstool-NG ones) put these libraries in
/usr/lib/.
To fix this, build a minimal C program and check if the program
interpreter contains /lib/ld-musl.
Signed-off-by: Ilya Kuzmich <ilya.kuzmich@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TOOLCHAIN_EXTERNAL_READELF is defined to
$(TOOLCHAIN_EXTERNAL_CROSS)readelf$(TOOLCHAIN_EXTERNAL_SUFFIX), where
TOOLCHAIN_EXTERNAL_SUFFIX is .br_real for Buildroot
toolchains. However, this is bogus, because readelf is not wrapped by
the Buildroot toolchain wrapper, so "<arch>-readelf.br_real" never
exists.
Therefore, it should simply be defined as
$(TOOLCHAIN_EXTERNAL_CROSS)readelf. Currently,
TOOLCHAIN_EXTERNAL_READELF is not used anywhere, so it wasn't visible,
but a follow-up commit will make use of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses config script can have different names depending on the
configuration (e.g. wchar support enabled/disabled). So, use
$(NCURSES_CONFIG_SCRIPTS) from the ncurses package as it contains the
proper name.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump Xenomai version to 3.0.3
- Remove patch 0001-bfin-remove-inline-keyword.patch for version
2.6.4, as it is already included in upstream
- Add upstream patch fixing gcc 6.x build issue of cyclictest.
Signed-off-by: Pawel Sikora <sikor6@gmail.com>
[Thomas: add patch fixing gcc 6.x build issue.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For a long time now Atheros USB AR9170 devices have been using the
carl9170 driver which relies on the carl9170-1.fw firmware file. This
firmware is available in linux-firmware but it wasn't currently
installed by Buildroot.
Signed-off-by: Karoly Pados <kp@tec4data.at>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update all appropriate version numbers as well as SHAs and MD5s as well
as repbasing BR's patches on top of 3.6.1 codebase (new github repo
tree, v3.6.1 tag was used). Note that patch:
[PATCH] Change the install location of _sysconfigdata.py
was dropped due to the fact taht build system now adds platform
specific suffix to sysconfigdata's name, so each platform's file
should have a unique name and distutils now allows to specify which
sysconfigdata is used via _PYTHON_SYSCONFIGDATA_NAME
see:
c4b53afce492dec548ff
and patches:
[PATCH] distutils/sysconfig: use sysconfigdata
[PATCH] setup.py: do not add invalid header locations
[PATCH] Do not harcode invalid path to ncursesw headers
was dropped since it looks like it made it's way upstream, see:
409482251b1351c31aa9e13c3201fb
respectively.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, qt.mk installs DejaVu/Vera TrueType fonts when Qt is configured for
freetype support. However, some users may prefer to limit the installed fonts
to only Qt's prerendered fonts (micro, fixed, helvetica, etc.). Or, there may
be a preference to use seperately installed TrueType fonts. This commit adds
a switch to explicitly control the installation of the TrueType fonts, similar
to the existing prerendered font enables.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also remove patch that has been merged upstream, disable AUTORECONF
since we're no longer patching configure.ac and get rid of hack
involving the install target as the 'install-data-hook' in Makefile.am
now avoids running 'vnstat --showconfig' on the host in case of
cross-compilation.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
2.4.0 added lz4 support. Make that choice explicit or the bundled compat-lz4
"stub" will be used.
Signed-off-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mdev does not set "/dev/snd" and "/dev/input" group and permission
propery, because with commit c3cf1e30a3022453311a7e9fe11d94c7a381640e
(May 2013!) the behavior of mdev has changed.
The device name is now taken directly from the uevent file and does no
longer match the old rule.
Fix the rules for "/dev/snd" and "/dev/input" according to the example
given in [1].
[1] http://lists.busybox.net/pipermail/busybox/2015-February/082297.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gdbinit file assumes the .dtb file is in the current directory, so
let's start gdb from output/images.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: improved commit description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building kmscube for mips64el leads to the following build error:
cube-tex.c: In function 'get_fd_rgba':
cube-tex.c:230:2: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < texh; i++) {
^
cube-tex.c:230:2: note: use option -std=c99 or -std=gnu99 to compile your code
cube-tex.c: In function 'get_fd_y':
cube-tex.c:261:2: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < texh; i++) {
^
cube-tex.c: In function 'get_fd_uv':
cube-tex.c:292:2: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0; i < texh/2; i++) {
I have sent a fix to mainline kmscube to address such issue, so bump to
the latest version.
Fixes: http://autobuild.buildroot.net/results/1f2/1f2ad0536254834582cf7fbce6a38dbb46a5e249/build-end.log
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, a new option sample-event-handler has been added. It has
been disabled by default in the .mk file, as it requires
libcurl. Support for it can be added later.
While at it, remove a trailing space.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I created the hash based on an old tarball in my dl dir which was
generated without the sorting introduced in commit 4f87aa7db5. This
time it is based on a properly created tarball.
Reported-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building git with toolchain that don't have thread support, we
get following build errors:
CC builtin/hash-object.o
builtin/grep.c: In function 'grep_submodule_launch':
builtin/grep.c:596:34: error: dereferencing pointer to incomplete type 'struct work_item'
status = capture_command(&cp, &w->out, 0);
^
builtin/grep.c: In function 'grep_submodule':
builtin/grep.c:644:20: error: storage size of 'w' isn't known
struct work_item w;
^
make[2]: *** [builtin/grep.o] Error 1
make[2]: *** Waiting for unfinished jobs....
Add two upstream patches to fix this issue.
Fixes:
http://autobuild.buildroot.net/results/94b/94bce9a99a5ce9894a6918774ab75e23d12c1394/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 2f6c5e513c
("support/check-bin-arch: fix for filenames with spaces"), Yann
adjuste the check-bin-arch script to properly handle filenames with
spaces.
However, he also did a subtle change of the regexp that extracts the
path of the files. It was:
"/^${package},(.+)$/!d; s//\1/;"
and Yann changed it to:
"/^${package},\.(.+)$/!d; s//\1/;"
So the file paths used to start with a dot (like "./usr/share/foo"),
and now they no longer start with a dot (like "/usr/share/foo"). While
this modification is good and makes sense, the match for
/lib/firmware/ was not adjusted accordingly, and the follow-up patch
also ignoring /usr/share was not adjusted as well.
This commit fixes those /lib/firmware/ and /usr/share/ special cases,
which will fix:
http://autobuild.buildroot.net/results/76a1475f4cdedb80426fb022ef2e644aa5625660/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Augeas is a configuration editing tool. It parses configuration files in
their native formats and transforms them into a tree. Configuration
changes are made by manipulating this tree and saving it back into
native config files.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Romain Naour <romain.naour@gmail.com>
[Thomas: fix Config.in comment dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
vboot-utils had a hash file, but is says "none" because it is a git
download. Since our git downloads are not reproducible, we can actually
add a hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uhttpd had a hash file, but is says "none" because it is a git download.
Since our git downloads are not reproducible, we can actually add a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ubus had a hash file, but is says "none" because it is a git download.
Since our git downloads are not reproducible, we can actually add a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When squashfs was bumped to 3de1687d in commit ee90313c64, the hash
file was not updated. This wasn't noticed before since hashes are not
checked for git downloads.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When linux-firmware was bumped to 6d3bc8886 in commit 3ff5896ff, a hash
file was added but the hash was wrong. This wasn't noticed before since
hashes are not checked for git downloads.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On most distros, the tar format defaults to GNU. However, at build time
the default format may be changed to posix. Also, future versions of
tar will default to posix.
Since we want the tarballs created by the git download method to be
reproducible (so their hash can be checked), we should explicitly
specify the format. Since existing tarballs on sources.buildroot.org
use the GNU format, and also the existing hashes in the *.hash files
are based on GNU format tarballs, we use the GNU format.
In addition, the Posix format encodes atime and ctime as well as mtime,
but tar offers no option like --mtime to override them. In the GNU
format, atime and ctime are only encoded if the --incremental option is
given.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
[Thomas: instead of adding tslib.org, just replace the github address by
the tslib.org one, which is the really upstream homepage.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ijs/ subfolder contains a bogus ltmain.sh file, which is actually a
broken symbolic link. Due to this, our logic to patch ltmain.sh files
fail with some patch versions:
>>> ghostscript 9.21 Patching libtool
File /home/buildroot/build/instance-0/output/build/ghostscript-9.21/ijs/ltmain.sh is not a regular file -- refusing to patch
Since we are anyway not using the ijs support (--without-ijs is passed),
do like we do for all other sub-components of ghostscript: get rid of
the ijs/ subfolder completely.
Fixes:
http://autobuild.buildroot.net/results/ca683d69b7fb564788c8877c3bb6466390e976a8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pid_t is a signed 32bits integer on both 32bits and 64bits
architectures.
This fixes an issue with apache server which causes bad pid
to be written in PidFile
Signed-off-by: Julien Beraud <julien.beraud@spectracom.orolia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0003-btrfs-progs-add-missing-limits-headers.patch since it's
already included in this release:
153d4e6c01
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes (https://www.openssh.com/txt/release-7.5):
Security
--------
* ssh(1), sshd(8): Fix weakness in CBC padding oracle countermeasures
that allowed a variant of the attack fixed in OpenSSH 7.3 to proceed.
Note that the OpenSSH client disables CBC ciphers by default, sshd
offers them as lowest-preference options and will remove them by
default entriely in the next release. Reported by Jean Paul
Degabriele, Kenny Paterson, Martin Albrecht and Torben Hansen of
Royal Holloway, University of London.
* sftp-client(1): [portable OpenSSH only] On Cygwin, a client making
a recursive file transfer could be maniuplated by a hostile server to
perform a path-traversal attack. creating or modifying files outside
of the intended target directory. Reported by Jann Horn of Google
Project Zero.
[Peter: mention security fixes]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- switch to version 9.21 now that it has been released
- add a hash file
- switch to Git formatted patches
- use $(HOSTCC) instead of hardcoding "gcc", and use $(HOST_CFLAGS) and
$(HOST_LDFLAGS) instead of hardcoding -L$(HOST_DIR)/usr/lib
-I$(HOST_DIR)/usr/include
- add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
.pyc files contain the modification time of the corresponding .py
source. In order to make the build reproducible, we fix the modification
time of all .py before compiling .pyc files.
In addition, since pycompile relies on the modification time to know if
a file needs to be recompiled, it is safer to force recompilation of all
source files.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: do not register PYTHON_FIX_TIME as a
PYTHON_TARGET_FINALIZE_HOOKS, instead call it inside
PYTHON_CREATE_PYC_FILES before doing the byte compilation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
.pyc files contain the modification time of the corresponding .py
source. In order to make the build reproducible, we fix the modification
time of all .py before compiling .pyc files.
In addition, since pycompile relies on the modification time to know if
a file needs to be recompiled, it is safer to force recompilation of all
source files.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: do not register PYTHON_FIX_TIME as a
PYTHON_TARGET_FINALIZE_HOOKS, instead call it inside
PYTHON_CREATE_PYC_FILES before doing the byte compilation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-elecrons.com>
By default, compile_dir() relies on the modification time to know if a
python file has to be built again. However in some circumstances (when
doing reproducible builds), modification times are not reliable. Thus,
this patch adds a way to force the rebuild of all python sources.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gx6605s is a nice SOC for dvbs2 DVB product, and C-SKY inside.
Signed-off-by: Guo Ren <ren_guo@c-sky.com>
[Thomas: drop post-image script copying the gdbinit file, and suggest
to use gdb -x option instead to point to the gdbinit file in board/.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v1 -> v2:
- use select instead of depends for BR2_PACKAGE_WAYLAND_PROTOCOLS
(suggested by Thomas Petazzoni)
- add select BR2_PACKAGE_WAYLAND_PROTOCOLS to missing second
place (BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_WAYLAND)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable wayland support (only needed for the interactive-wayland
test program). This fixes a compile failure in case wayland
support is autodetected:
GEN xdg-shell-unstable-v5-protocol.c
/bin/sh: /usr/bin/wayland-scanner: No such file or directory
Makefile:2426: recipe for target 'xdg-shell-unstable-v5-protocol.c' failed
make[3]: *** [xdg-shell-unstable-v5-protocol.c] Error 127
make[3]: *** Waiting for unfinished jobs....
GEN xdg-shell-unstable-v5-client-protocol.h
/bin/sh: /usr/bin/wayland-scanner: No such file or directory
Makefile:2428: recipe for target 'xdg-shell-unstable-v5-client-protocol.h' failed
make[3]: *** [xdg-shell-unstable-v5-client-protocol.h] Error 127
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As shown recently by the firejail example, it is easy to miss that a
package builds and installs binaries without actually cross-compiling
them: they are built for the host architecture instead of the target
architecture.
This commit adds a small helper script, check-bin-arch, called as a
GLOBAL_INSTRUMENTATION_HOOKS at the end of the target installation of
each package, to verify that the files installed by this package have
been built for the correct architecture.
Being called as a GLOBAL_INSTRUMENTATION_HOOKS allows the build to error
out right after the installation of the faulty package, and therefore
get autobuilder error detection properly assigned to this specific
package.
Example output with the firejail package enabled, when building for an
ARM target:
ERROR: architecture for ./usr/lib/firejail/libconnect.so is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/bin/firejail is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/libtrace.so is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/libtracelog.so is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/ftee is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/lib/firejail/faudit is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/bin/firemon is Advanced Micro Devices X86-64, should be ARM
ERROR: architecture for ./usr/bin/firecfg is Advanced Micro Devices X86-64, should be ARM
Many thanks to Yann E. Morin and Arnout Vandecappelle for their reviews
and suggestions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This config option corresponds to the string returned by readelf for
the "Machine" field of the ELF header. It will be used to check if the
architecture of binaries built by Buildroot match the target
architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following nommu kernel build issue:
arch/xtensa/kernel/setup.c: In function 'cpu_reset':
arch/xtensa/kernel/setup.c:553:2: error: implicit declaration of function
'local_flush_tlb_all' [-Werror=implicit-function-declaration]
local_flush_tlb_all();
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When Gstreamer debugging is disabled (BR2_PACKAGE_GSTREAMER1_GST_DEBUG)
we get following build errors:
gstvaapisink.c: In function 'gst_vaapisink_init':
gstvaapisink.c:1902:39: error: 'gst_debug_vaapisink' undeclared (first use in this function)
gstvaapisink.c:1902:39: note: each undeclared identifier is reported only once for each function it appears in
gstvaapidecode.c: In function 'gst_vaapidecode_init':
gstvaapidecode.c:1365:63: error: 'gst_debug_vaapidecode' undeclared (first use in this function)
gstvaapidecode.c:1365:63: note: each undeclared identifier is reported only once for each function it appears in
gstvaapipostproc.c: In function 'gst_vaapipostproc_init':
gstvaapipostproc.c:1811:7: error: 'gst_debug_vaapipostproc' undeclared (first use in this function)
gstvaapipostproc.c:1811:7: note: each undeclared identifier is reported only once for each function it appears in
Add upstream patch to fix these build issues.
Fixes:
http://autobuild.buildroot.net/results/653/653d9b056b04e589b8f5c57111635b0b3d7c8949
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List libnl as a dependency when it is enabled. Make sure that
libnfnetlink is actually enabled when listing it as a dependency.
Cc: Ilias Apalodimas <apalos@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All source files, except src/filemq_client.c and src/filemq_server.c,
has MPL Version 2.0 license text in file header.
As confirmed with upstream [1] (L)GPLv3 license texts COPYING and
COPYING.LESSER are leftover from previous implementation.
[1] - https://github.com/zeromq/filemq/issues/74
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For sparc-buildroot-linux-uclibc/sysroot/usr/include/asm/termbits.h
containing:
/* These have totally bogus values and nobody uses them
so far. Later on we'd have to use say 0x10000x and
adjust CBAUD constant and drivers accordingly.
#define B2500000 0x00001010
#define B3000000 0x00001011
#define B3500000 0x00001012
#define B4000000 0x00001013 */
Fixes [1]:
wiringSerial.c: In function 'serialOpen':
wiringSerial.c:78:28: error: 'B2500000' undeclared (first use in this function)
case 2500000: myBaud = B2500000 ; break ;
^
wiringSerial.c:78:28: note: each undeclared identifier is reported only once for each function it appears in
wiringSerial.c:79:28: error: 'B3000000' undeclared (first use in this function)
case 3000000: myBaud = B3000000 ; break ;
^
wiringSerial.c:80:28: error: 'B3500000' undeclared (first use in this function)
case 3500000: myBaud = B3500000 ; break ;
^
wiringSerial.c:81:28: error: 'B4000000' undeclared (first use in this function)
case 4000000: myBaud = B4000000 ; break ;
^
[1] http://autobuild.buildroot.net/results/5be/5bea1e95d1c7b444a5f0a5770251f1af3efc9c18
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Automake currently has a unescaped left brace in it's automake.in folder
that generates the warning:
"Unescaped left brace in regex is deprecated, passed through in regex;"
This patch, which is backported from upstream fixes this warning.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: format patch using "git format-patch".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add host-pkgconf to detect sqlite support, otherwise
checking pkg-config is at least version 0.9.0...
./configure: line 7981: /home/buildroot/br2/output/host/usr/bin/pkg-config: No such file or directory
no
[...]
checking for SQLITE3... no
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is useful when bind-mounting the docker client binary into
containers for a docker-in-docker setup.
The Docker CLI communicates with the daemon over a socket. It is
sometimes useful to bind-mount the Docker CLI and socket into containers at
run-time, so that scripts within the containers can call the Docker API
in the host using a client compatible with the host daemon.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently when running Qt5_CinematicExperience demo from Qt5.8 the
covers of the movies appear with a black box instead of showing the
actual art cover.
Also, the fonts are incorrectly displayed in many cases.
Fix these issues by applying temporary patches to etnaviv.
According to Christian Gmeiner and Wladimir J. van der Laan
the correct solution to this problem is to use shader variants [1].
Use these temporary patches until the correct solution appears in
mesa mainline, so that etaniv users can run Qt successfully for
the time being.
[1] https://lists.freedesktop.org/archives/mesa-dev/2017-March/147948.html
Tested on imx6q-sabresd board.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sysvinit is far from ultimate init implementation these days. Update the
help text to match reality.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of the version 3.6.0 compile_dir() call will treat its 'quiet'
argument as a full blown integer rather than a boolean value and perform
integer comparison operations such as '<' or '>='.
To account for that convert ReportProblem type to be a true derivative
of built-in int() and override all of int's rich comparison operators in
order to be able to "sniff" for PyCompileError in all possible use-cases
The integer value ReportProblem pretends to be is teremined by class
variable VALUE which is set to 1.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[Thomas:
- remove jpeg, tiff and libpng dependencies, they do not seem to be
used
- add host-pkgconf as a dependency, since the configure script uses
PKG_CHECK_MODULES()
- pass --disable-opencl to explicitly disable OpenCL support
- add comment to explain why we don't add support for cairo, pango and
icu as optional dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add firmware files for the UART attached Bluetooth on TI Wilink series
wireless connectivity combo chips.
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Thomas: rename config option so that it has the BR2_PACKAGE_ prefix.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The .mk file for the mono package contains out of date configuration
options. The --disable-gtk-doc option is no longer available in
configure. Moonlight is no longer supported in Mono and the
--with-moonlight=no option is no longer required.
Signed-off-by: Dustin Johnson <dustin.r.johnson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Without this patch, it is not possible to allocate PTYs when a generated
rootfs image with a recent glibc and systemd is launched as a container on
an RHEL7 system via machinectl/systemd-nspawn. The container boots, but
`machinectl login mycontainer` fails. The culprit is /dev/pts/ptmx with
0000 perms.
On a typical system, there are two `ptmx` devices. One is provided by the
devpts at /dev/pts/ptmx and it is typically not directly accessed from
userspace. The other one which actually *is* opened by processes is
/dev/ptmx. Kernel's documentation says these days that /dev/ptmx should be
either a symlink, or a bind mount of the /dev/pts/ptmx from devpts.
When a container is launched via machinectl/machined/systemd-nspawn, the
container manager prepares a root filesystem so that the container can live
in an appropriate namespace (this is similar to what initramfs is doing on
x86 desktops). During these preparations, systemd-nspawn mounts a devpts
instance using a correct ptmxmode=0666 within the container-to-be's
/dev/pts, and it adds a compatibility symlink at /dev/ptmx. However, once
systemd takes over as an init in the container,
/lib/systemd/systemd-remount-fs applies mount options from /etc/fstab to
all fileystems. Because the buildroot's template used to not include the
ptmxmode=... option, a default value of 0000 was taking an effect which in
turn led to not being able to allocate any pseudo-terminals.
The relevant kernel option was introduced upstream in commit 1f8f1e29 back
in 2009. The oldest linux-headers referenced from buildroot's config is
3.0, and that version definitely has that commit. Mount options that are
not understood by the system are anyway ignored, so backward
compatibility is preserved.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: fix commit title, adjust commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a userspace library that allows easy use of crypto
interfaces exposed by the kernel.
A git tip is used instead of the last official release, as autotools
support and cross-compilation fixes have been added only very recently.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas:
- Change sub-option prompt to "build test applications"
- Be more specific about the license: the library is under BSD-3c only,
while the programs are under BSD-3c or GPLv2.
- Explicitly disable programs when BR2_PACKAGE_LIBKCAPI_APPS is not
enabled.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch builds and installs Qt examples for declarative module.
It proceeds the same way as others Qt5 modules. Samples are installed
under /usr/lib/qt/examples/qml directory (/usr/lib/qt/examples/quick for
quick).
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some users may want to build the s6-rc service database offline using a
post-build script. So make the host variant visible in menuconfig.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is still required when building libepoxy against mesa egl without
x11 (GL).
Mesa needs a preprocessor define to avoid including X11 headers and
since this is not forwarded into epoxy.pc for other
libraries/applicatons that link against it it will fail.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 1.2.x branch is no longer maintained, so remove it since it's
likely security-vulnerable.
mbedtls is the modern replacement which was renamed from polarssl when
ARM bought them up.
However major releases broke API so polarssl 1.2.x isn't always
interchangeable with polarssl/mbedtls 1.3.x (interim mixed naming
because of new ownership) or newer 2.x series.
Fortunately we don't have any package in the tree that uses polarssl
exclusively.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- Remove entry in DEVELOPERS file for this package. Noticed by Arnout.
- Remove comment in bctoolbox.mk that no longer makes sense after
polarssl removal. Noticed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- rebase 0001-Adjust-for-buildroot-build.patch
- delete 0002-include-asm-ioctl.h-directly-for-_IOC_SIZEBITS.patch
(all changes are incorporated into wiringpi-2.44)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent versions of fakeroot have grown support for acl. We don't really
need this since we don't use acls in Buildroot. However, it turns out
that "cp -a" does something funky with acls, with the result that
fakeroot without acl support looses the ownership and permissions on
the copied file. "cp -a" may be (is even likely to be) used in a
BR2_ROOTFS_POST_FAKEROOT_SCRIPT, so we need to support this.
Note that host-acl itself depends on host-attr, so this pulls in two
extra packages in each build. The impact on build time is about 10s.
Cc: Andreas Naumann <dev@andin.de>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The acl build system doesn't use automake, therefore it is broken. It
doesn't use the CFLAGS passed by configure. Work around this by passing
CFLAGS in the environment. The makefiles append to CFLAGS, so this
works.
This issue hasn't led to build failures, but it is visible e.g. when
stack protector is enabled: the stack protector options are not applied
to acl. Also debug and optimisation options aren't applied.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license is actually closer to ISC than MIT, E.G.:
https://opensource.org/licenses/ISC
vs
https://opensource.org/licenses/MIT
>From COPYING:
Permission to use, copy, modify, and distribute this software and its
documentation for any purpose and without fee is hereby granted,
provided that the above copyright notice appear in all copies and that
both that copyright notice and this permission notice appear in
supporting documentation, and that the names of Digital or MIT not be
used in advertising or publicity pertaining to distribution of the
software without specific, written prior permission.
E.G. this is very similar to the normal ISC text which has been extended
with a BSD-3c style advertisinc clause. Both are permissive licenses, but
it is more correct to call it ISC-like.
Notice: As pointed out by Rahul Bedarkar, this may actually be more closely
related to the OpenBSD template license:
http://cvsweb.openbsd.org/cgi-bin/cvsweb/src/share/misc/license.template?rev=HEAD
But that is also based on the ISC license, so calling it ISC-like is still
correct.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As noticed by Rahul Bedarkar, the cairo library is LGPLv2.1 only
(not LGPLv2.1+) or MPLv1.1.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2017-2784 - Freeing of memory allocated on stack when validating a
public key with a secp224k1 curve.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2017-3302 - C client library for MySQL (libmysqlclient.so) has
use-after-free defect which can cause crash of applications using that MySQL
client.
CVE-2017-3313 - Difficult to exploit vulnerability allows low privileged
attacker with logon to the infrastructure where MySQL Server executes to
compromise MySQL Server. Successful attacks of this vulnerability can
result in unauthorized access to critical data or complete access to all
MySQL Server accessible data.
And a number of important, but non-security related fixes:
MDEV-11842: Fix a 10.1.21 regression with failed INSERT, BEFORE INSERT
triggers, and columns with no default value
MDEV-12075: Fix a 10.1.21 regression in the InnoDB data file extension code
For details, see the release notes:
https://mariadb.com/kb/en/mariadb/mariadb-10122-release-notes/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now the code checks for PR_SET_NO_NEW_PRIVS before using it, so the kernel
headers dependency can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
- Fix several out of bounds reads in the OpenPGP parser
- Fix handling of OpenPGP reserved tag (should be rejected)
- Fix various crashes from malformed packages with invalid tags
Release notes:
http://rpm.org/wiki/Releases/4.13.0.1
This patch also switches from GitHub to rpm.org since the last one seems
to be more up-to-date.
[Peter: use RPM_VERSION_MAJOR as suggested by Jerzy Grzegorek]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice that this fixes a security issue:
CWE-416 (use after free condition during netjoin processing). No CVE
assigned yet:
https://irssi.org/security/irssi_sa_2017_03.txt
But the 0.8.x series is not believed to be vulnerable to this specific
issue. From the advisory:
Affected versions
-----------------
Irssi up to and including 1.0.1
We believe Irssi 0.8.21 and prior are not affected since a different
code path causes the netjoins to be flushed prior to reaching the use
after free condition.
Openssl is no longer optional, so select it and drop the enable/disable
handling.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since kmscube upstream commit a2dc60cf05b704 ("Add m4/.gitignore")
there is no need to manually create the m4 directory anymore, so
simply remove KMSCUBE_POST_PATCH_HOOKS.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If building on a machine with MATLAB installed, the MATLAB bindings will
default to ON, which is not the desired behavior for a cross build.
The bindings are designed to be called from within MATLAB, and we are
not currently running MATLAB on buildroot-generated targets.
This does not preclude the use of the bindings from a host connecting
over the network backend (assuming libiio on the host has the bindings
enabled).
Signed-off-by: Matthew Fornero <mfornero@mathworks.com>
Acked-By: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because Buildroot passes its own CFLAGS/LDFLAGS, this was overriding
the ones from the package Makefile, leading to build failures because
-fPIC was no longer being passed.
This commit fixes that by adding a patch that allows to keep the
package CFLAGS while passing additional ones through the make command
line. While doing this, it also removes a few hardcoded optimization
and hardening flags, leaving it to Buildroot to decide whether they
should be passed or not. This makes the workaround for stack protector
no longer needed.
Fixes:
http://autobuild.buildroot.net/results/b25/b256d003d841e492da073788198203e7cbc834cf/
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[Thomas: tweak commit log and patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with the release 2016.09 xtensa architecture is supported by
the U-Boot. Enable uimage target in xtensa linux kernel.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux configs are missing memmap= option that is required for xtfpga
boards configured w/o device tree starting with linux-4.9. Add it.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[Thomas:
- Add entry to DEVELOPERS file for the new package
- Add dependency on !BR2_STATIC_LIBS, because the Makefile
unconditionally builds a shared library
- Use the "github" helper function to define <pkg>_SITE, get rid of
<pkg>_SOURCE.
- License is BSD-2c, not just BSD.
- Add <pkg>_LICENSE_FILES variable.
- Define LIBSCRYPT_DISABLE_STACK_PROTECTOR inside the
BR2_TOOLCHAIN_HAS_SSP condition, and move from a
LIBSCRYPT_POST_EXTRACT_HOOKS to a LIBSCRYPT_POST_PATCH_HOOKS.
- Pass $(TARGET_CONFIGURE_OPTS) instead of just passing CC.
- Pass $(TARGET_MAKE_ENV) when calling $(MAKE).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is an issue with powerpc64le and boost::uuids::random_generator on the
following line of code (from include/boost/uuid/seed_rng.hpp):
sha.process_bytes( (unsigned char const*)&std::rand, sizeof( void(*)() ) )
This line "inspects the first couple bytes (here eight) of the std::rand
function to seed some rng. Due to the implementation of process_bytes and
inlining happening, it seems that one of the loops therein uses &rand-1 as
some boundary, compiling with -O0 makes that reloc come out as 'rand + 0' and
the link will succeed."
See: https://bugzilla.suse.com/show_bug.cgi?id=955832#c7
Fixes:
- http://autobuild.buildroot.org/results/454c0ea393615bae2d1b44be9920f25b5c49fc33
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These aren't supported upstream any more so remove the options and add
them to legacy handling.
Switch older deprecations that used 3.18.x to 3.12.x
Remove stray version strings as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps ARC toolchain to arc-2017.03-eng008.
Please note that it is an engineering build and it might have all kinds
of breakages, please don't use it for production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sysinfo.h header conflict issue is now fixed since upstream commit
c414ecd9b9151 ("Fix build with musl libc"). Enable build with musl. Enable
reverse dependencies as well.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gstreamer-vaapi consists in a collection of VA-API based plugins for
GStreamer and helper libraries. These libraries are used for hardware
decoding and encoding of several video formats.
decoding formats:
JPEG, MPEG-2, MPEG-4:2, H.264 AVC, H.264 MVC, VP8, VC-1, WMV3, and HEVC.
encoding formats:
MPEG-2, H.264 AVC, H.264 MVC, JPEG, VP8, HEVC
The package won't compile without at least one renderer enabled, so I
chose to enable DRM by default, as X11, GLX, and wayland are heavy
handed with the dependencies. As such, I have disabled every option
defaulting to yes except for DRM for the first patch.
Also, these codecs are only for x86 and require a Intel CPU (See Hardware
Requirements on line 82 of the README file.)
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas:
- Add entry to DEVELOPERS file.
- Add BR2_TOOLCHAIN_HAS_THREADS dependency to the main Config.in
option.
- Add BR2_PACKAGE_HAS_UDEV dependency to the main Config.in option.
- Add comments about the BR2_STATIC_LIBS config option.
- Rewrap Config.in help text and removing trailing tabs/spaces.
- Remove restriction to i386/x86-64
- Add patch to fix build with uClibc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to src/plugins/platforms/eglfs/deviceintegration/deviceintegration.pro
depends on eglfs_gbm which depends according to src/gui/configure.json
on features.eglfs and features.gbm and features.kms, so dependency
on BR2_PACKAGE_MESA3D_OPENGL_EGL which enables mesa3d gbm support
should be sufficient.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add egl config and QT_EGL_NO_X11 define (as all other eglfs project
files do) to src/plugins/platforms/eglfs/eglfs-plugin.pro.
Fixes ([1]):
In file included from .../host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/EGL/egl.h:39:0,
from ../../../../include/QtEglSupport/5.8.0/QtEglSupport/private/../../../../../src/platformsupport/eglconvenience/qt_egl_p.h:63,
from ../../../../include/QtEglSupport/5.8.0/QtEglSupport/private/qt_egl_p.h:1,
from api/qeglfsglobal_p.h:56,
from api/qeglfsintegration_p.h:54,
from qeglfsmain.cpp:41:
.../host/usr/arm-buildroot-linux-uclibcgnueabihf/sysroot/usr/include/EGL/eglplatform.h:119:22: fatal error: X11/Xlib.h: No such file or directory
compilation terminated.
Makefile.eglfs-plugin:1024: recipe for target '.obj/qeglfsmain.o' failed
make[2]: *** [.obj/qeglfsmain.o] Error 1
make[2]: Leaving directory '.../qt5base-5.8.0/src/plugins/platforms/eglfs'
Makefile:71: recipe for target 'sub-eglfs-plugin-pro-make_first-ordered' failed
make[1]: *** [sub-eglfs-plugin-pro-make_first-ordered] Error 2
[1] http://lists.busybox.net/pipermail/buildroot/2017-March/186158.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The firejail package does not cross-compile at all, because it is not
using automake, but a hand-written Makefile.in. So it does not use the
cross-compiler found by ./configure.
But when we fix it by passing:
FIREJAIL_MAKE_ENV = $(TARGET_CONFIGURE_OPTS)
it then fails to build with symbols redefinitions:
/home/ymorin/dev/buildroot/O/host/usr/bin/arm-linux-gnueabihf-gcc -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -ggdb -O2 -DVERSION='"0.9.44.8"' -fstack-protector-all -D_FORTIFY_SOURCE=2 -fPIC -Wformat -Wformat-security -c libtrace.c -o libtrace.o
/tmpfs/cckgOLVz.s: Assembler messages:
/tmpfs/cckgOLVz.s:1115: Error: symbol `stat64' is already defined
/tmpfs/cckgOLVz.s:1282: Error: symbol `lstat64' is already defined
/tmpfs/cckgOLVz.s:2296: Error: symbol `fopen64' is already defined
/tmpfs/cckgOLVz.s:2631: Error: symbol `freopen64' is already defined
Makefile:16: recipe for target 'libtrace.o' failed
(ditto for libtracelog)
Fixing this is not trivial, so we just mark the package as broken.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Chris Frederick <chrisf@cdf123.net>
[Thomas: also mark the Config.in comment as BROKEN.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nbd uses fork and threads, so remove the comment about the dependency:
it is not inherited from glib2 anymore (it has not been for a while in
fact).
The dependency on wchar is also a requirement for nbd, because configure
needs wchar to test for C99.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the code expects both the client and server to be in
/usr/bin, while the client is in /usr/sbin
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove getchar() patch which has been applied upstream.
Add recommanded post-release patch from upstream to fix 64-bit atomic
operations on 32-bit x86 with gcc versions older than 4.7.
Add a patch from upstream to fix FPE issue with uClibc-based toolchains.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for PolarSSL is deprecated and the usage of mbedTLS is
recommended, if not OpenSSL is used as crypto backend.
Also change the direction of the OpenSSL/mbedTLS package selection to
be the same as in ustream-ssl to prevent a circular dependency.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-linux-init, a set of minimalistic tools to
create a s6-based init system, including a /sbin/init program, on a
machine running a Linux kernel.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 7670dcc43e, which
causes a Config.in circular dependency:
package/openssl/Config.in:1:error: recursive dependency detected!
package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_MBEDTLS
package/mbedtls/Config.in:1: symbol BR2_PACKAGE_MBEDTLS is selected by BR2_PACKAGE_OPENSSL
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, rpi-userland installs files in $(@D)/../../bin/ which is
entirely stupid, especially in cross-compilation.
Get rid of the dubious, broken, custom install command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove getchar() patch which has been applied upstream.
Add recommanded post-release patch from upstream to fix 64-bit atomic
operations on 32-bit x86 with gcc versions older than 4.7.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fedorahosted.org has closed on March 1st, 2017, and we were anyway
already using github as a source for logrotate. This commit therefore
updates the Config.in help text to also use github as the upstream
site.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Before this commit, lxc-user-nic could potentially have been tricked into
operating on a network namespace over which the caller did not hold
privilege.
This commit ensures that the caller is privileged over the network namespace
by temporarily dropping privilege.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of downloading a *different* version of the kernel for the
headers as for the headers itself, use the same one.
BR2_KERNEL_HEADERS_AS_KERNEL is the default, but we have to set the
custom version.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kernel headers version used to be default when the default was
still 4.9. Now, however, we switched the default headers version to
4.10 but the beagleboardx15 kernel is still 4.9, so we have to set
the kernel headers version explicitly.
Fixes https://gitlab.com/buildroot.org/buildroot/builds/11700987
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides s6-portable-utils, a set of tiny general Unix
utilities, often performing well-known tasks such as cut and grep, but
optimized for simplicity and small size.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-rc, a service manager for s6-based systems,
i.e. a suite of programs that can start and stop services, both
long-running daemons and one-time initialization scripts, in the proper
order according to a dependency tree.
The host variant is provided so s6-rc-compile is available and can
be used to build the services database offline, either in a package
Makefile or a post-build script.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6-dns, a suite of DNS client programs and
libraries for Unix systems, as an alternative to the BIND, djbdns or
other DNS clients.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides s6, a small suite of programs for UNIX,
designed to allow process supervision (a.k.a service supervision), in
the line of daemontools and runit.
The host variant is provided as it is required to build the host
variant of s6-rc. Only the libraries and headers are installed.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ac1910713c (efl: remove broken JP2K loader) added a legacy entry for
BR2_PACKAGE_EFL_JP2K, but forgot to add the 'help' keyword before the help
text, leading to confusing error messages from kconfig:
Config.in.legacy:482: syntax error
Config.in.legacy:481: unknown option "JP2K"
Config.in.legacy:482: unknown option "while"
Config.in.legacy:483: unknown option "JP2K"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_PYTHON3_{READLINE,ZLIB,BZIP2,XZ} options were so far
only bringing in the necessary dependencies, relying on the Python
build system to automatically detect them.
However, this means that even if one of those option was disabled, if
their dependency was found, Python would build the corresponding module,
which is really not what the user would expect.
For example, if you have:
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_PYTHON3_READLINE is not set
Then you would still get the readline Python module built and installed.
This commit fixes that by adding new --{enable,disable} options, and use
them in python3.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit fa62773826 ("python3: do not use the system OpenSSL in the host
variant") added a patch that allows to disable building the OpenSSL
related modules in Python, even if OpenSSL is found.
But in this commit, it was only used to unconditionally disable OpenSSL
support for the host python3.
This commit extends that to use the --disable-openssl option also for
the target python3, when BR2_PACKAGE_PYTHON3_SSL. This ensures that if
BR2_PACKAGE_PYTHON3_SSL is disabled, but BR2_PACKAGE_OPENSSL is enabled,
we still don't get the OpenSSL modules built, as the user would expect.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_PYTHON_{READLINE,HASHLIB} options were so far only
bringing in the necessary dependencies, relying on the Python build
system to automatically detect them.
However, this means that even if one of those option was disabled, if
their dependency was found, Python would build the corresponding module,
which is really not what the user would expect.
For example, if you have:
BR2_PACKAGE_READLINE=y
# BR2_PACKAGE_PYTHON_READLINE is not set
Then you would still get the readline Python module built and installed.
This commit fixes that by adding new --{enable,disable} options, and use
them in python.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the cpython project has a nice Github repository, with tags,
it's much nicer to handle the stack of Python patches with Git. The
python3 package patches had already been converted, but not the python
package patches. Therefore, this commit does the move.
There is no functional change, only reformatting of the patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package has been marked as broken since 2015.02. Since this was
already unavailable without mention in Config.in.legacy for 9 Buildroot
releases, legacy handling isn't very useful.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option has been marked as broken since 2011. No need for legacy
handling.
And anyway, nowadays we use automatic dependencies for bindings.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option has been marked as broken since 2010. No need for legacy
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: remove dead code in qt.mk, as pointed out by Peter Seiderer.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package has been marked as broken since 2010. No need for legacy
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package has been marked as broken since 2010. No need for legacy
handling.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option has been marked as broken since 2016.08. Since nobody
repaired it, we'll just remove it.
Since technically it was already removed in 2016.08, it's added to the
2016.08 section of the legacy menu.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Reviewed-By: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Like ARM, BR2_ARCH doesn't correspond to the uname -m. With cmake
CMAKE_SYSTEM_PROCESSOR is expected to contain the uname -m value.
So we change CMAKE_SYSTEM_PROCESSOR from powerpc64 -> ppc64 (big endian)
and powerpc64le -> ppc64le (little endian).
This corrects the cross compile to the powerpc64{,le} target
architecture for the mariadb (and possibly others) packages that
use the CMAKE_SYSTEM_PROCESSOR variable and compare it against
Power64 based architectures.
Signed-off-by: Daniel Black <daniel.black@au.ibm.com>
Acked-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lighttpd server runs cgi application that has no way to get environment
variables that are set up for it.
S50lighttpd is changed to source /etc/default/lighttpd file where these
environment variables can be set up.
Signed-off-by: Philipp Skadorov <philipp.skadorov@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
firejail depends on !uClibc, so the "firejail needs !uClibc" comment
should be displayed when we do have uClibc. Right now the logic is just
the other way around, so flip it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The somewhat complicated sed expression has been removed in commit
06cd604ec6 ("toolchain/external: use
-dumpversion to check gcc version"), so let's remove the comment that
was explaining this sed expression.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, `--version` option is used and later matched with a regex to get
the actual gcc version. There's a dedicated gcc option to do exactly that:
`-dumpversion`.
Also `--version` may return a string customised by a vendor that provides
the toolchain, which makes the current regex approach error prone. In
fact, this situation has been seen with a real customised toolchain.
Signed-off-by: Krzysztof Konopko <kris@youview.com>
Signed-off-by: Tomasz Szkutkowski <tomasz.szkutkowski@youview.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit:
- Adds a development rootfs defconfig for the at91sam9x5ek board for
NAND-based configurations.
- Adds SD-card based configurations for the at91sam9x5ek board, both a
minimal one and development one.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add at91sam9x5ek_mmc_defconfig to have all four combinations:
NAND minimal, NAND development, SD minimal, SD development.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firejail Security Sandbox
https://firejail.wordpress.com/
Lightweight application sandboxing system using seccomp and kernel
namespaces.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
[Thomas:
- Fix DEVELOPERS entry: use <> around the e-mail address instead of ()
- firejail builds fine with musl, so only exclude uclibc, which fails
to build with EM_ARM undeclared
- Update to upstream version 0.9.44.8.
- Remove FIREJAIL_MAKE_OPTS, as suggested by Romain Naour.
- Pass --enable-busybox-workaround only if Busybox is enabled, as
suggested by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have decided that lua packages should have a name that starts with
lua (like is the case for python and perl). However, we're not going to
rename all the existing lua packages that don't start with lua. This
makes it unclear for people adding packages how they should name the
package, so add a comment to package/Config.in to explain it.
It's rather terse but it gets the message across.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The location at ftp.csx.cam.ac.uk only stores 2 latest versions of PCRE.
This results in old (2015.11 and older currently) buildroot versions
timing out on wget several times and having to retrieve the package
from sources.buildroot.org afterwards.
Signed-off-by: Oleg Kitain <okitain@ya.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bump fix the build failure with gcc5 for barebox.
Some changes were made to the first patch to align to the latest
barebox api.
Also done the following changes:
- Use "BR2_TARGET_BAREBOX_CONFIG_FRAGMENT_FILES" instead of patching
the barebox sources.
- Use "BR2_GLOBAL_PATCH_DIR" instead of
"BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
GNUTLS-SA-2017-3A - Addressed integer overflow resulting to invalid
memory write in OpenPGP certificate parsing.
GNUTLS-SA-2017-3B - Addressed crashes in OpenPGP certificate parsing,
related to private key parser. No longer allow OpenPGP certificates
(public keys) to contain private key sub-packets.
GNUTLS-SA-2017-3C - Addressed large allocation in OpenPGP certificate
parsing, that could lead in out-of-memory condition.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The board support package includes the following components:
- U-Boot 2016.11
- Linux 4.9.3
- packages:
- alsa-utils for basic audio usage of the on-board headphone jack
and microphone
- iw and wpa_supplicant for managing the wireless interface
Two Linux patches are necessary to enable audio and wifi support. Both
patches are fetched from the Linux next branch and are probably mainlined in
Linux 4.11.
A Linux configuration fragment enables the wireless device driver, which
is not enabled by default in the mainline defconfig of the board.
The wifi chip needs a NVRAM configuration file which is provided in the
rootfs overlay.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: remove e2fsprogs from the target packages, add entry in
DEVELOPERS file, remove C++ support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for kmscube application, which is helpful for testing
kms/drm drivers.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Include the --disable-dependency-tracking option in <pkg>_CONFIGURE_CMDS
only on the condition that <pkg>_OVERRIDE_SRCDIR is empty. Dependency
tracking is very welcome while developing in order to properly rebuild
when calling make <pkg>-rebuild for instance.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
On older SoCFPGA SoCs, there was not enough SRAM to fit the entire
U-Boot, so a SPL model was used. The SPL was therefore the binary that
had to be "prepared" to be loaded by the ROM code using the mkpimage
tool.
With newer SoCFPGA SoCs, there is enough SRAM to fit the entire U-Boot,
and therefore the ROM code directly loads U-Boot. In this case, it's the
real U-Boot image (not the SPL) that needs to be prepared using
mkpimage.
This code adds support for the newer SoCFPGA SoCs, by adjusting the
mkpimage related logic to apply on the SPL if an SPL is enabled, or on
the full U-Boot image otherwise.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildroot repository is now mirrored on
https://gitlab.com/buildroot.org/buildroot so we can use Gitlab-CI to
test Buildroot. Gitlab-CI is controlled by a .gitlab-ci.yml file
that exists in the repository.
For now, the only test is building all defconfigs (inspired on
https://travis-ci.org/buildroot/buildroot-defconfig-testing/). Since
all the defconfigs have to be specified in the .gitlab-ci.yml file,
we generate the file based on .gitlab-ci.yml.in. The generated
.gitlab-ci.yml file has to be committed into the repository, though,
otherwise Gitlab-CI doesn't see it. So there is also a test to verify
that .gitlab-ci.yml is up-to-date.
Building all the defconfigs takes a long time. Gitlab-CI will do that
every time it pulls from git.buildroot.org, which is once per hour.
That is way too often. Therefore, the defconfigs are not built on pull,
but only on explicit trigger through the API or when a tag is added.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- fix typo not -> no
- add LC_ALL=C when calling 'ls -1' to get a predictable order of the
defconfigs
- regenerate .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GTest version 1.8.0 includes gmock so merge both packages inside gtest
In this merge:
- Add gmock as a suboption of gtest (BR2_PACKAGE_GTEST_GMOCK)
following advice from Arnout Vandecappelle
- Add BR2_PACKAGE_GMOCK as a legacy entry, selecting BR2_PACKAGE_GTEST
and BR2_PACKAGE_GTEST_GMOCK.
- Use cmake to install libraries and headers and add missing files
(gtest.pc, gtest-config, gmock.pc) in
GTEST_POST_INSTALL_STAGING_HOOKS instead of redefining
GTEST_INSTALL_STAGING_CMDS
- Remove patch on Python as gmock/gtest now supports python 3.0
(commit 456fc2b5c4e9ebf05a5987dfe1ff0ac9ffeb53cc)
- Add the correct license in HOST_GTEST_LICENSE as all python code in
googlemock/scripts/generator is licensed under Apache-2.0 and not
BSD-3c
- Fix URL of gtest project in Config.in
- Remove the gmock entry from DEVELOPERS
- Install gmock_gen directly, instead of as a symlink to gmock_gen.py
Notice that any external package that depends on gmock will cause an
immediate build termination because make doesn't know how to build
gmock. Since the user has just removed gmock from the legacy menu, it
should be quite obvious what needs to be done.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Use += instead of = when assigning a value to <pkg>_DEPENDENCIES in
conditional
- Remove comment about the "tricky logic" around BUILD_GTEST and
BUILD_GMOCK
- Move GTEST_GMOCK_INSTALL_MISSING_FILE inside
the ($(BR2_PACKAGE_GTEST_GMOCK),y) condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many packages install documentation under /usr/share/lua/.../doc. Add
a TARGET_FINALIZE_HOOK to remove it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The infra sets _SUBDIR to the correct value, so we can use it to define
_LICENSE_FILES.
This removes the need for LUA_CJSON_VERSION_UPSTREAM.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LuaRocks has a policy that the rockspec and rock filenames are lower
case. However, the upstream name may contain uppercase characters.
We have several packages like that in Buildroot. To simplify the
package .mk files, apply the lowercase from within the infra.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These defconfigs have been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. In addition, the rocketboards git
repository used by these defconfigs hasn't been reachable for more than
half a year. Finally, these defconfigs don't even use the
BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC option so they are not a
great example for this family of targets.
Remove these defconfigs, as well as the board directory. Both are
removed in a single commit to avoid having an inconsistent readme.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Jan Viktorin <viktorin@rehivetech.com>
Cc: Charles Manning <cdhmanning@gmail.com>
Cc: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as it board
directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gergely Imreh <imrehg@gmail.com>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The scripts used for the minnowboards were generic for MinnowBoard and
MinnowBoard MAX. Since we removed the original MinnowBoard, this isn't
necessary anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has been broken due to gcc5 for more than half a year,
and nobody stepped up to fix it. Remove it, as well as the files it
references. Update the readme to remove references to MinnowBoard.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building sngrep with OpenSSL support in static linking configurations
currently fails due to undefined symbols in the OpenSSL library. It's
the usual problem with using AC_CHECK_LIB() to discover libraries
instead of the pkg-config based PKG_CHECK_MODULES().
Therefore, this commit introduces a patch that switches to using
pkg-config to discover OpenSSL. A preliminary patch is needed, without
which appending to LIBS/CFLAGS doesn't work. Both patches have been
submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/911143de823b2c749ac0a59dfa06adb6ddd3de50/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though x264 doesn't use an autoconf generated configure script
(and hence doesn't use the autotools-package infrastructure), it uses
config.guess and config.sub. The ones bundled in x264 are too old to
know about the OpenRISC architecture, so this commit leverages the
UPDATE_CONFIG_HOOK from the autotools-package infrastructure to update
config.sub and config.guess.
Fixes:
http://autobuild.buildroot.net/results/b458c2dff0ecde61248f058092c6eeaa75039cfb
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we tell cmake where to look for our own custom platform
description by passing the path to the moduls directory on the command
line.
However, this causes two different problems.
First, some packages simply set CMAKE_MODULE_PATH in their
CMakeList.txt, thus overriding our own path, and then our platform
description is not found.
Second, cmake may internally call sub-cmake (e.g. in the try_compile
macro), but the CMAKE_MODULE_PATH is not automatically passed down in
this case.
For the first problem, we could hunt down and fix all offenders, but
this is an endless endeavour, especially since packagers are told to do
so on the cmake wiki [0]:
CMAKE_MODULE_PATH
tell CMake to search first in directories listed in
CMAKE_MODULE_PATH when you use FIND_PACKAGE() or INCLUDE()
SET(CMAKE_MODULE_PATH ${PROJECT_SOURCE_DIR}/MyCMakeScripts)
FIND_PACKAGE(HelloWorld)
The second problem could be solved by passing yet another variable on
the command line, that tells cmake to explicitly pass arbitrary
variables down to sub-cmake calls:
-DCMAKE_TRY_COMPILE_PLATFORM_VARIABLES=CMAKE_MODULE_PATH
However, this only covers the case of try_compile. Even though no other
case is known yet, we'd still risk missing locations where we would need
to propagate CMAKE_MODULE_PATH, even some where we'd have no solution
like for try_compile.
Instead, ngladitz on IRC suggested that CMAKE_MODULE_PATH be set
directly from the toolchain file.
And indeed this fixes both problems explained above.
So be it.
[0] https://cmake.org/Wiki/CMake_Useful_Variables
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mosquitto combined with version 2.1.0 of libwebsockets yields a failing
system. Version 2.1.1 restores the websocket interface again.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 0552a367db ("Remove --{enable, disable}-debug configure flags.")
we do not pass --enable-debug to configure script. The patch to remove -Werror
in this case is thus no longer needed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINES variable is automatically set by bash to represent the number
of lines in the terminal. That variable can be set when the shell
receives SIGWINCH.
If the shell does receive SIGWINCH after our LINES array is filled, the
content of the array is mangled.
Rename the variable to avoid that.
Fixes#9456
Reported-by: George Y. <georgebrmz@oss3d.com>
Reported-by: Paul Stewart <paulstewartis@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdk-pixbuf-loader support is enabled by default but it silently fail to
generate gdk-pixbuf.loaders file when host != target.
For exemple on ARM target:
output/host/usr/bin/gdk-pixbuf-query-loaders ./libpixbufloader-svg.la
g_module_open() failed for output/build/librsvg-2.40.16/gdk-pixbuf-loader/./libpixbufloader-svg.la: output/build/librsvg-2.40.16/gdk-pixbuf-loader/./.libs/libpixbufloader-svg.so: wrong ELF class: ELFCLASS32
But it doesn't break the build.
When host = target using the Sourcery CodeBench AMD64 2016.11 toolchain
optimized for x86_68 AMD Puma/Jaguar or AMD Steamroller, it break the
build due to "Illegal instruction".
output/host/usr/bin/gdk-pixbuf-query-loaders libpixbufloader-svg.la
Illegal instruction (core dumped)
Since this option is broken for cross-compilation, disable it.
Fixes:
http://autobuild.buildroot.net/results/393/393145bc9bcb93d6df55ec8c63725c3d9a299957
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bump of python-enum to version 0.4.6 in commit
636df89872 forgot to update the license
information. Even though the PKG-INFO file still pretends it's GPLv2
or Python license, the only license file available is LICENSE.GPL-3
(which indicates a GPLv3 license), and the comment header in the
source code is pretty clear:
This is free software: you may copy, modify, and/or distribute
this work under the terms of the GNU General Public License as
published by the Free Software Foundation; version 3 of that
license or any later version. No warranty expressed or
implied. See the file ‘LICENSE.GPL-3’ for details.
Fixes:
http://autobuild.buildroot.net/results/7fec1c7cde710f523263e74b1849f1f4488b7d26/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bump causes build failure with musl, this new version uses with
undefined REG_STARTEND which is a glibc-ism that isn't available for
musl-based toolchains.
The introduction of this is to address
https://savannah.gnu.org/bugs/?50030 so it's not quite straightforward
to fix.
This reverts commit d003554343.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we now require Lua package names to start with "lua", it is likely
that the Buildroot name is different from the upstream LuaRocks name.
Add a feature to the luarocks-package infra that makes it easier to
handle this situation: the package can explicitly specify the upstream
name in PKG_NAME_UPSTREAM, and that name will be used in PKG_ROCKSPEC,
PKG_SOURCE and PKG_SUBDIR.
Add an explanation of this feature to the manual. To make the example
relevant, it is changed to lua-foo, where the upstream name is plain
foo. To avoid confusion with the dependency on a native library, that
dependency is renamed to bar.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the reworked luarocks extraction, they are no longer needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks package infra extracts the package directly under
$(BUILD_DIR), because the contents are always in a subdirectory name
<pkg>-<version>. However, this only works when the upstream package name
is the same as the Buildroot package name.
Instead, we can rely on the fixed structure of a .src.rock: it always
contains the source subdirectory in a directory called foo, where foo
is the basename of the .src.rock file. Therefore, we can extract into
a subdirectory of $($(PKG)_DIR), then move its contents up two
directory levels.
Note, we can't extract directly into $($(PKG)_DIR) because it's
possible that $($(PKG)_SUBDIR) == <pkg>-<version>. In that case, we
would try to move the directory unto itself and get "Directory not
empty". This is the case e.g. for the lpty package.
Two alternatives were considered but are more complicated:
- instead of using wildcards for the move, we could have used
<.src.rock basename>/$($(PKG)_SUBDIR);
- instead of extracting with luarocks, we could use unzip to extract
(the .src.rock is a ZIP file), but then we also have to move the
.rockspec into the subdir. In addition, sometimes the ZIP file
contains a tarball instead of the extracted source.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of luaposix to 33.4.0, it doesn't work anymore at
runtime with LuaJIT or Lua 5.1. This can be tested with the following
defconfig:
BR2_x86_64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_LUA=y
BR2_PACKAGE_LUA_5_1=y
BR2_PACKAGE_LUAPOSIX=y
/usr/bin/lua: /usr/share/lua/5.1/posix/init.lua:17: module 'bit32' not found:
...
In older luaposix versions, it would try to load the 'bit' instead of
'bit32' module if LUAVER == 5.1. However, this feature was removed in
33.4.0.
So instead of adding a runtime dependency on luabitop, depend on
lua-bit32.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed to make luaposix work.
The upstream name is just "bit32", but the luarocks infra doesn't
support an upstream name different from the Buildroot name. We therefore
have to explicitly set all variables and we need custom extract
commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- add entry to DEVELOPERS file
- remove useless "depends on BR2_PACKAGE_HAS_LUAINTERPRETER" in
Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luarocks infra already provides the correct default value for
PKG_SUBDIR, so it doesn't have to be defined in the .mk file.
Therefore, _VERSION_UPSTREAM doesn't need to be defined either.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not used for anything.
Note that the SUBDIR is NOT the usual lpty-$(LPTY_VERSION_UPSTREAM);
it *does* have the rockspec version in its name.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license file in a luarocks package is always inside the subdir, so the
example should reflect this.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-luarocks-package macro was using $(3)_VERSION as the package
version, i.e. the version of the target package, even when it's the
host package. We should instead use $(2)_VERSION, i.e. the host package
version, like is done in inner-generic-package.
Since luarocks-package doesn't even support a host version, it doens't
make a whole lot of difference, but let's keep things consistent.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cosmo package has been marked as broken for two and a half years
now, and nobody cared. Get rid of it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The latest crossbar needs a rather recent setuptools package, that
has circular dependencies. Until this issue is not resolved, it is
not safe to bump crossbar version.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 701380c53b4d("fontconfig: add build fix for glibc 2.25") added
a patch that touches src/fcobjs.h. Package build system detects change
in timestamp and tries to regenerate fcobjshash.gperf which requires
gperf tool. So this commit adds dependency on host-gperf.
Since the patch is in upstream fontconfig, we can get rid of this
dependency once version is bumped next time.
Fixes:
http://autobuild.buildroot.net/results/174/17471088b26ebc840d1922d7f2aa9e69b4b49ced
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: improve comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides execline, a (non-interactive) scripting language,
like sh, used in the s6 supervision system.
The host variant is provided as it is required to build and run the host
variants of s6 and s6-rc.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function copy_toolchain_sysroot, which is in charge of copying the relevant
bits from the external toolchain to the staging directory, performs an rsync
loop of various directories and excludes the pattern 'usr/lib/locale' with
the intention of skipping the directory <toolchain>/usr/lib/locale.
However, while this worked in the original commit, commit
5628776c4a broke it inadvertently. The
relevant part of the diff:
- rsync -au --chmod=Du+w --exclude 'usr/lib/locale' \
- $${ARCH_SYSROOT_DIR}/$$i $(STAGING_DIR)/ ; \
+ rsync -au --chmod=Du+w --exclude 'usr/lib/locale' \
+ --exclude lib --exclude lib32 --exclude lib64 \
+ $${ARCH_SYSROOT_DIR}/$$i/ $(STAGING_DIR)/$$i/ ; \
Notice how the source directory now contains a trailing slash, which impacts
the way the exclude rules are interpreted. Previously, when 'i' was 'usr',
the exclude of 'usr/lib/locale' would find a match. With the trailing slash,
there will never be a match, unless for a directory 'usr/usr/lib/locale'.
The right rule would have been '--exclude lib/locale'.
However, just that fix does not solve the problem in all cases, in
particular in the (common) case where ARCH_LIB_DIR is 'lib'. This is due
another change in that commit, changing the iterated values of the above
rsync:
- for i in etc $${ARCH_LIB_DIR} sbin usr ; do \
+ for i in etc $${ARCH_LIB_DIR} sbin usr usr/$${ARCH_LIB_DIR}; do \
Due to the fact that we rsync both 'usr' as 'usr/lib' (assuming ARCH_LIB_DIR
is 'lib') we need to add the correct exclude in both cases. But the exclude
is different for both. When i == 'usr', the correct exclude rule would be
'--exclude lib/locale' while when i == 'usr/lib' the correct rule would be
'--exclude locale'.
Since we would like to avoid separate cases for this, use the following
exclude: '--exclude locale/'. The trailing slash will make sure only
directories called 'locale' will match. The targeted directories are then
usr/lib/locale and usr/share/locale. The latter directory was not matched
originally, but it should not hurt changing that.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed with Thomas Petazzoni, we can reduce the nesting level by early
returning on an invalid iteration.
I did not move the 'else' case (the common case) outside the if-else because
it would make the code less symmetrical and IMO makes it _less_ clear.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
EUMM don't find .xs file in subdirectory (only .pm files are handled)
So, let move lib/GD.xs in the root directory.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libsidplay2 package build system is completely broken. It is made
of a top-level configure script, which calls into sub-configure
scripts in sub-directories. However, since it doesn't use the autoconf
provided AC_CONFIG_SUBDIRS() mechanism, an "autoreconf" doesn't
recurse into the subdirectories.
Due to this, the aclocal.m4 in the libsidplay/ subdirectory doesn't
get re-generated when Buildroot autoreconfs the package. However,
since we patch one of the .m4 files in this subdirectory, when build
time comes, the package notices its aclocal.m4 is older than one of
the .m4 file, and triggers an automatic autoreconf.
Since <pkg>_AUTORECONF = YES is enabled, this automatic autoreconf
works fine: host-autoconf and host-automake are available.
Expect that on powerpc64le, we patch the configure script itself to
make it recognize powerpc64le. But this patching of the configure
script itself gets overwritten by the automatic autoreconf at the
beginning of the build step, causing the build to fail on powerpc64le.
Switching to AC_CONFIG_SUBDIRS() would allow to fix this, but
libsidplay2 needs to pass custom configure options to each of the
sub-configure scripts, something that AC_CONFIG_SUBDIRS() doesn't
support. And since libsidplay2 upstream looks completely dead, the
incentive to fix the whole thing is very limited.
Since what's broken is the autoreconfiguration of the package, what we
do is modify patch 0001-sidplay2-libs-2.1.1.patch to directly tweak the
configure script (instead of the relevant .m4 file). Thanks to this,
<pkg>_AUTORECONF = YES is no longer needed, the .m4 file is no longer
newer than the sub-configure script, and no automatic autoreconf
triggers at build time. This allows the package to build properly on
powerpc64le.
While we normally don't like patching 'configure' scripts directly, in
this case the size of the change in the configure script is very small,
and as explained above, the incentive to fix the package properly is
very limited.
In detail, the changes:
* Patch 0001-sidplay2-libs-2.1.1.patch is turned into a Git-formatted
patch
* The irrelevant changes to Makefile.in files, aclocal.m4, config.h.in,
sidint.h are removed.
* The change to my_macros.m4 is applied directly to the corresponding
configure script.
* The change to the configure.ac script regarding libdir is applied
directly to the corresponding configure script.
* The change to the configure.ac script regarding "*-k*bsd*-gnu" is
dropped, since we don't care about kFreeBSD support.
* LIBSIDPLAY2_AUTORECONF = YES is dropped from the .mk file.
Fixes:
http://autobuild.buildroot.net/results/1f6a42bfece24e09c9c7f4078d549ec5c099c89d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit d4c4c259d2. It was
mistakenly committed and pushed: it causes Kconfig circular
dependencies, so it cannot be applied as-is.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't want a dozen glibc versions and there's no particular reason to
keep this old version around so drop it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add entry to Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kodi needs CWIID_MESG_BALANCE
https://github.com/xbmc/xbmc/blob/Krypton/tools/EventClients/Clients/WiiRemote/CWIID_WiiRemote.cpp#L106
It was added after the last cwiid release, which took place 2009:
2174214bc2
Instead of adding another 20k-sized patch we switch to the upstream
github repo and bump to its HEAD commit, dating back to 2010.
By doing this we can remove two patches which were applied upstream:
0001-fix-link-options-for-as-needed-90.patch
6af6786165
0002-Update-for-BlueZ-changes.patch
c5dd7d4a9a
The remaining patches were renumbered.
This patch is needed for the upcoming Kodi version bump which also adds
optional cwiid support.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the buildroot website is not leveraging common
techniques to have a better loading speed (browser caching,
gzip compression, deflating).
This commit provides an .htaccess files with all the needed to
enable mentioned features. This .htaccess only works if the
webserver has deflate, expires and headers modules enabled.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
memtool allows one to read and write memory mapped registers via /dev/mem.
The commands are inspired by the respective commands of the barebox
bootloader. This is handy during driver development to inspect and modify
register settings. It can also be used to modify regular files and
character devices (e.g. to paint to /dev/fb0).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mpd package fails for both internal and external ARC toolchain as check
for pthread support fails. Such checks fails because _REENTRANT flag is
not defined in gcc even when -pthread is passed.
So we add patch to gcc that defines _REENTRANT on ARC when -pthread is
passed.
Also it disables mpd package for external ARC toolchain as it fails due
to the same issue.
This patch should be reverted as soon as the patch for GCC becomes a
part of ARC toolchain.
Fixes:
http://autobuild.buildroot.net/results/7d7/7d70b62ad996830fbeca46dffcc7a1dc030e575d//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The handling of RPATH in cmake-3.7 has changed drastically, causing a
slew of build failures dues to libraries from the host being pulled in:
- domoticz : http://autobuild.buildroot.org/results/fd0/fd0ba54c7abf973691b39a0ca1bb4e07d749593a/
- freerdp : http://autobuild.buildroot.org/results/5d4/5d429d0e288754a541ee5d8be515454c5fccd28b/
- libcec : http://autobuild.buildroot.org/results/3f3/3f3593bab7734dd274faf5b5690895e9424cbb89/
- and so on...
The bug was reported upstream [0], which dismissed it altogether [1] as
being expected behaviour, quoting:
I don't think there is anything wrong with that change on its own.
It merely exposed some existing behavior in a new case.
Instead, upstream suggested in that same message that a platform
definition be used instead, quoting:
If a toolchain file specifies CMAKE_SYSTEM_NAME such that a custom
`Platform/MySystem.cmake` file is loaded then the latter can set
them as needed for the target platform.
So here we are doing so:
- we add a new platfom definitions that inherits from the Linux one,
then overrides the problematic settings;
- we change our toolchain file to use that platform instead;
- we tell cmake where to find additional modules, so that it can find
our custom platform file.
This has been tested to work in the following conditions:
- pre-installed host cmake, versions 3.5.1 (Ubuntu 16.04) and 3.7.2
(manually built)
- internal cmake, versions 3.6.3 (the current version as of this
patch) and 3.7.2 (with the followup patches).
Thanks to Jörg, Ben and Baruch for the help investigating the issue.
Special thanks to Jörg for handling the discussion with upstream and
pointing to the relevant messages! :-)
[0] http://public.kitware.com/pipermail/cmake/2017-February/064970.html
[1] http://public.kitware.com/pipermail/cmake/2017-February/065063.html
To be noted: Thomas suggested we set these directly in the toolchain
file. Unfortunately, wherever we put those settings in the toolchain
file, this does not work.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Ben Boeckel <mathstuf@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GNU classpath builds fine on sparc and sparc64 architectures. So
we allow building it there to be consistent with the naming of
BR2_PACKAGE_CLASSPATH_ARCH_SUPPORTS.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iso9660 generation for grub2 assumes that grub-eltorito.img is
available. However, this image is only available for the i386-pc target
(i.e. legacy BIOS). An EFI-bootable iso9660 requires a different layout.
Since we currently can't generate the EFI-bootable iso9660 layout,
require the i386-pc target to be selected in grub.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: arnaud.miche@orange.com
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncftp build process tries to build and run a small program called
ccdv to beautify the build process output. If it manages to build and
run it, then it uses it.
Unfortunately, this doesn't work well when the target architecture is
close to the host architecture, but not exactly the same. Because both
architectures are close to each other, the test run of ccdv succeeds,
but real use of ccdv during ncftp build process causes an Illegal
instruction issue.
This for example happens with the CodeSourcery AMD64 toolchain, on a
build machine running an i7-4600U, and has been detected in the
autobuilders since the CodeSourcery AMD64 toolchain was upgraded at
the end of January:
http://autobuild.buildroot.net/?reason=ncftp-3.2.6
The issue was also reported by Christopher Arguin back in July 2016:
http://lists.busybox.net/pipermail/buildroot/2016-July/168026.html
and at the time, we identified that simply disabling the ccdv tool, by
passing --disable-ccdv, was enough to solve the issue. But Christopher
never submitted the patch, so the problem remained unfixed.
Therefore, we pass --disable-ccdv to the configure script, which
fixes:
http://autobuild.buildroot.net/results/6eadad0e879ca70bb07b13b4196d42c64b11699f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit e482ebf51d attempted to fix the
installation of qt5quickcontrols by only installing the PrivateWidgets
directory for the 5.8.0 version.
However, the availability of PrivateWidgets has nothing to do with the
version; in both 5.6.2 and 5.8.0, the installation is gated by the
following statement in src/src.pro:
qtHaveModule(quick):qtHaveModule(widgets): SUBDIRS += widgets
i.e. it is installed when both the Quick and the Widgets module are
available. The Widgets module is controlled by Buildroot's
BR2_PACKAGE_QT5BASE_WIDGETS symbol, the Quick module is controlled by
Buildroot's BR2_PACKAGE_QT5DECLARATIVE_QUICK. The qt5quickcontrols
package selects BR2_PACKAGE_QT5DECLARATIVE_QUICK so it is not really
needed to include it in the condition. However, it is theoretically
possible to build this package without QtQuick. Also, adding this
condition makes it consistent with src.pro.
Note that commit e482ebf51d introduces a
second fix (not mentioned in the commit message): for version 5.6.2, the
Layouts directory is installed, but in 5.8.0 this directory doesn't
exist any more. Therefore, a separate condition on the version is still
needed.
Fixes:
http://autobuild.buildroot.net/results/1ff3e9ad4ba518d0a37f9fc12038bf9020f28094
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a75ab1fc1d ("package/classpath:
Don't depend on jamvm"), we removed the dependency of classpath on
jamvm. Since jamvm is only available for a reduced set of architectures,
classpath could until this commit until be built on those architectures.
However, now that this dependency has been removed, classpath can
potentially be built for all architectures supported by Buildroot, even
though it doesn't support all of them.
Since adding support for additional architectures in classpath doesn't
make much sense, because classpath is in Buildroot only usable with
JamVM anyway, and JamVM is only available for a small set of
architectures, this commit simply makes classpath available on the
architectures that it supports.
By doing so, it also removes the or1k support patch which was added by
commit f12a146f81, since anyway or1k is
not supported by JamVM.
Fixes:
http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/
(classpath on microblaze)
http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/
(classpath on nios2)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On PowerPC64(le), we patch all configure scripts. Due to this, the
version.texi in OpenOCD files gets regenerated, and then since it has
a newer date than openocd.info, openocd build system rebuilds the
documentation. Unfortunately, this documentation rebuild fails on old
machines.
We work around this by faking the date of the generated version.texi
file, to make the build system believe the documentation doesn't need
to be regenerated.
Fixes:
http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 68cebedeb9 ("assimp: work around
gcc bug on SuperH"), a work around was added to make the package build
with gcc on SuperH. The condition included a test on the gcc version,
which was mistakenly done on the host gcc version, while a test on the
target gcc version was intended.
Thanks to Peter Korsgaard for spotting the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit enables PAM support in systemd if BR2_PACKAGE_LINUX_PAM is
set. Some essential config files are not installed without the
--enable-pam option.
Signed-off-by: James Balean <james@balean.com.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc versions earlier than gcc 6.x fail to build assimp on SuperH when
static linking:
AssxmlExporter.cpp:623:1: error: unable to find a register to spill in class 'GENERAL_REGS'
It's the combination of -Os and *not* having -fPIC that makes gcc
fail, which explains why configurations with dynamic linking work
fine.
-Os -fPIC -> works
-Os -> fails
-O2 -fPIC -> works
-O2 -> works
Therefore, as a workaround, we are forcing the use of -O2 on SuperH
when the gcc version is older than gcc 6.x and we're statically
linking.
Fixes:
http://autobuild.buildroot.net/results/ec88aa8118179e30e24603cc45292047dca19216/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX has been removed in commit
311bc137da ("toolchain: kill ADI
Blackfin toolchain"), so this "depends on" is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libuv library uses __sync atomic built-ins:
$ readelf -a -W output/target/usr/lib/libuv.so.1.0.0 | grep __sync
122: 00000000 0 NOTYPE GLOBAL DEFAULT UND __sync_val_compare_and_swap_4
but this is not currently taken into account in the libuv package,
causing some build failures in packages using libuv as an optional
dependency, such as janus-gateway and mosquitto.
Therefore, this commit updates the libuv package with this additional
dependency. The reverse dependencies of libuv are also updated: luv, luvi
and moarvm.
Fixes:
- http://autobuild.buildroot.net/results/bdaa67d763c0d8d377a04529c74f73bee7d4ccef/
(janus-gateway)
- http://autobuild.buildroot.net/results/2bc84ba2d1167018e2d48e5183ead22b6425dcf5/
(mosquitto)
[Peter: drop cmake changes after cmake revert]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
htop wants to use backtrace() support from the C
library. Unfortunately, with old uClibc versions such as the one we
use for the ARC architecture, the backtrace() implementation is in
libubacktrace. In addition, this implementation needs dladdr()
support, which is in libdl, not available when static linking.
Since this problem no longer exists in more recent versions of uClibc,
we simply special case the ARC+static linking case, and make the
configure script believe that <execinfo.h> is not available.
Fixes:
http://autobuild.buildroot.net/results/cdea351fad7a0f61ddec3e6a141da8da0523a902/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot manual documents that <pkg>_CONF_ENV is passed in the
environment when calling cmake during the configure step. However, the
actual implementation in pkg-cmake passes HOST_<pkg>_CONF_ENV when
configuring the host variant of a cmake package, but does not pass
<pkg>_CONF_ENV when configuring the target variant of a cmake package.
This commit fixes that by passing <pkg>_CONF_ENV in the environment as
expected. It should not cause any behavior change, because this
feature is in fact not used by any package in upstream Buildroot:
$ grep CONF_ENV $(git grep -l cmake-package package/)
package/pkg-cmake.mk:$(2)_CONF_ENV ?=
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
This issue was reported by Olivier <ovalentin@awox.com> as bug #9616.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Remove distribution upgrade cause it slows down the first boot and
presents a bug when executed non interactively.
* Reorganize provision scripts to be in privileged and non privileged
sections
* Add Ubuntu mirror automatic handling for apt packages sources
Fixes bug #9581
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenGl support mean GLX so it require X11 support.
Select automatically BR2_PACKAGE_SDL2_X11 to enable minimal X11
libraries support (libx11 and libxext).
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses sub-options BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}
are currently very badly broken: they only control whether the
libform, libmenu and libpanel libraries are installed in
$(TARGET_DIR), but do absolutely nothing about their installation in
$(STAGING_DIR).
This means that when one of those options is disabled, the
corresponding library is indeed not installed in the target, but is
available in staging. It can therefore be detected by the configure
script of another package and used... even though the library will not
be in the target, causing a runtime failure.
Internally, ncurses.mk uses the "make install" logic of ncurses for
the staging installation, but uses a completely hand-written logic for
the target installation, which is the reason for this
desynchronization between what's installed in staging and target.
When BR2_PACKAGE_NCURSES_WCHAR=y, this also causes some build
failures. Indeed, when BR2_PACKAGE_NCURSES_WCHAR=y, Buildroot creates
some symbolic links lib<foo>.so -> lib<foo>w.so in staging and target,
but only for the lib<foo> that have been enabled by
BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}. Due to this, a package
that for example needed the libmenu library but forgot to select
BR2_PACKAGE_NCURSES_TARGET_MENU was:
- Building fine with BR2_PACKAGE_NCURSES_WCHAR disabled (because
libmenu.so exists in staging), but would fail to run at runtime
because libmenu.so is not in the target.
- Fail to build with BR2_PACKAGE_NCURSES_WCHAR=y because only
libmenuw.so exists, and not the libmenu.so symbolic link.
Since those libraries are small (43K for libform, 21K for libmenu and
8.2K for libpanel), this commit takes the very simple approach of
removing those options, and installing the libraries
unconditionally. It therefore uses the "make install" logic for both
the staging *and* target installation.
In detail, this commit:
- Removes the NCURSES_PROGS variable, not needed since
--without-progs already allows to disable the build and
installation of programs.
- Removes the NCURSES_LIBS-y variable, and replaces it with a single
unconditional assignement to NCURSES_LIBS, only used to create the
lib<foo>w.so -> lib<foo>.so symbolic links when wchar support is
enabled.
- Removes NCURSES_INSTALL_TARGET_CMDS and the functions it was
calling: NCURSES_INSTALL_TARGET_LIBS and
NCURSES_INSTALL_TARGET_PROGS.
- Adds a NCURSES_TARGET_SYMLINK_RESET hook to create the reset ->
tset symbolic link, as was done before.
- Adds a NCURSES_TARGET_CLEANUP_TERMINFO to cleanup the terminfo
files in the target, so that we stay in the same situation in terms
of installed terminfo files.
- Removes the BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL} options
from the Config.in files: both their definition and usage.
- Simplifies all the symlink dance for lib<foo> -> lib<foo>w, because
as Yann E. Morin suggested, this dance is only needed in staging, not
in the target. Once binaries have been built, they refer to the
SONAME of the library, which is the lib<foo>w variant (for shared
linking). For static linking and .pc files, it's obvious that we
don't care about them on the target. Therefore the
NCURSES_LINK_LIBS_STATIC, NCURSES_LINK_LIBS_SHARED and
NCURSES_LINK_PC functions no longer take any argument: they always
apply to STAGING_DIR only. NCURSES_LINK_TARGET_LIBS is removed.
It is worth mentioning that adding Config.in.legacy support is *NOT*
necessary. Indeed:
- If they were disabled before this patch, having them in
Config.in.legacy would not trigger the legacy warning.
- If they were enabled before this patch, then the behavior is
unchanged: all libraries are now unconditionally installed. So
there is no point in warning the user.
We double-checked the installed size of a filesystem containing just
ncurses before and after this patch, and the only folder that has its
size changed is /usr/lib, growing from 852 KB to 932 KB in the wchar
enabled case. That's a 80 KB system size increase.
This commit fixes the sngrep build failure and potentially numerous
runtime issues with ncurses.
Fixes:
http://autobuild.buildroot.net/results/7b5db21a6c568e6c6c8fe2b5d5a2f5ca24df510c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove patch as it has been applied upstream since 1.13
- go packages are now in vendor instead of vendor/src so update
slightly the configure and build commands
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there's not much point in generating missing host keys when the
init script is called with "stop", the call to ssh-keygen should not
be done inconditionally, but in the start function instead.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit a5015f1025 ("util-linux: security
bump to version 2.29.2") incorrectly removed <pkg>_AUTORECONF = YES.
While the patches touching configure.ac have indeed been removed, there
is still a patch touching a Makemodule.am file, which triggers an
autoreconf a build time, which itself fails because autoconf/automake
are not available.
So re-add <pkg>_AUTORECONF, with a comment pointing specifically at the
patch that makes it necessary.
Fixes:
http://autobuild.buildroot.net/results/309127a532eed00e406bbaf0b1a51b7241a10505/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the host build of Python 2 defaults to narrow unicode (UCS2),
ignoring the BR2_PACKAGE_PYTHON_UCS4 configuration option which may be
set to wide (UCS4).
This results in host and target Python packages which are incompatible
in subtle ways.
For example, installing wheels into the target fails when they are made
with the host python, citing incompatibility (as can be seen by the
package tags which may be "cp27u-manylinux1" instead of
"cp27mu-manylinux1").
Compiling the host Python 2 with the same UCS configuration as the
target ensures that the packages are compatible (and the tags match).
This does not affect Python 3 as support for narrow unicode was
deprecated in version 3.3, see https://www.python.org/dev/peps/pep-0393/
Thanks to Tony Breeds <tony@bakeyournoodle.com> for reporting this.
Signed-off-by: Chris Smart <mail@csmart.io>
[Thomas: add comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-5847 - The gst_asf_demux_process_ext_content_desc function in
gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote
attackers to cause a denial of service (out-of-bounds heap read) via vectors
involving extended content descriptors.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-5848 - The gst_ps_demux_parse_psm function in
gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows
remote attackers to cause a denial of service (invalid memory read and
crash) via vectors involving PSM parsing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It turned out that the troll character U+c2a0 was added by our own
patch.
So fix it amd drop our second patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to btrfs-progs that fixes the build of
docker-engine, and possibly other packages including kerncompat.h from
btrfs-progs.
For the btrfs-progs build itself, a --disable-backtrace option allows to
indicate whether backtrace()/<execinfo.h> support should be used or
not. However, once btrfs-progs is installed, it simply looks at whether
__GLIBC__ is defined or not to decide to use backtrace() or not.
However, uClibc defines __GLIBC__ but does not provide backtrace()
functionality. The additional patch tweaks the kerncompat.h to look at
__UCLIBC__ and not use backtrace() functionality in this case.
Fixes:
http://autobuild.buildroot.net/results/9dc9370a79c5c44e6c92be6a44334842c211d923/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
Makefile:532: *** mbedtls is in the dependency chain of bctoolbox that
has added it to its _DEPENDENCIES variable without selecting it or
depending on it from Config.in. Stop.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Trying to copy loaders.cache from host-gdk-pixbuf to the gdk-pixbuf
build directory in the post-patch hook is too early when using TLP (it
breaks horribly) since host-gdk-pixbuf isn't built yet during the
massive unpack/patch cycle.
Switch it to the pre-build hook instead which ensures that gdk-pixbuf
dependencies were already built.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This release needs a new tweak regarding loaders.cache - it's now used
to build the thumbnailer.
Since we already generate it using the host variant for the target we
can re-use this for the build step.
It's not necessary to used the tweaked version since the build one is
only used to account for mime types, not the plugins/loaders themselves.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the comment about the ARC exception to match the one used in VLC,
so that a 'git grep "ARC toolchain issue"' returns the list of packages
to re-evaluate on ARC when the ARC toolchain gets upgraded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because with libimxvpuapi older than 0.10.3, the gst1-imx-0.12.3 "imxvpu"
plugin will not build.
Changelog:
* properly pass on color format in simplified JPEG encoder interface
* add alternative write-callback-style encoding mode
also add encode example variant which uses write-callback style output
* add support for "fake grayscale mode" in encoders
this is done by using I420 internally and filling the U and V planes
with 0x80 bytes
* make sure JPEG quantization table is copied in standardized zig zag order
the VPU does not, so this has to be done explicitely
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-2629 - curl SSL_VERIFYSTATUS ignored
>From the advisory (http://www.openwall.com/lists/oss-security/2017/02/21/6):
Curl and libcurl support "OCSP stapling", also known as the TLS Certificate
Status Request extension (using the `CURLOPT_SSL_VERIFYSTATUS` option). When
telling curl to use this feature, it uses that TLS extension to ask for a
fresh proof of the server's certificate's validity. If the server doesn't
support the extension, or fails to provide said proof, curl is expected to
return an error.
Due to a coding mistake, the code that checks for a test success or failure,
ends up always thinking there's valid proof, even when there is none or if the
server doesn't support the TLS extension in question. Contrary to how it used
to function and contrary to how this feature is documented to work.
This could lead to users not detecting when a server's certificate goes
invalid or otherwise be mislead that the server is in a better shape than it
is in reality.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From https://www.kernel.org/pub/linux/utils/util-linux/v2.29/v2.29.2-ReleaseNotes
This release fixes su(1) security issue CVE-2017-2616:
It is possible for any local user to send SIGKILL to other processes with root
privileges. To exploit this, the user must be able to perform su with a
successful login. SIGKILL can only be sent to processes which were executed
after the su process. It is not possible to send SIGKILL to processes which
were already running.
Drop upstream patches and autoreconf since it's no longer required.
[Peter: extend commit message with CVE info / description]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit limits results from the javascript query for selecting
messages from the mailing list. It was not limited before.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The imx6ul-liteboard dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And use same version for header headers as well.
[Peter: explicitly set BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_10 as pointed
out by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9666 [1]
cp -dpfr .../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets .../target/usr/qml/QtQuick
cp: cannot stat ‘.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets’: No such file or directory
[1] https://bugs.busybox.net/show_bug.cgi?id=9666
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 76838f6341.
The commit referenced above explicitly states that the function was
copied as-is from the gcc source code at the time. And indeed that is
exactly how the function appeared in gcc in commit
e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934.
However, our toolchain wrapper is "GPLv2 only", while the file this function
was copied from is "GPLv3 or later". As such we can't include that function
and still comply to both licenses.
Furthermore, the code is far from optimum.
Since this feature is not release-critical, revert it until we re-implement
it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Ilias Apalodimas <apalos@gmail.com>
[Thomas:
- rewrap Config.in help text
- add dependency on !BR2_STATIC_LIBS since the code uses libdl.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we force selection on mbedtls for bctoolbox. If, for whatever
reason, mbedTLS is not found, bctoolbox searches for PolarSSL and, if
not present, fails with:
```
Could NOT find PolarSSL (missing: POLARSSL_INCLUDE_DIRS
HAVE_POLARSSL_SSL_H)
```
This happens because bctoolbox enables support for mbedTLS and PolarSSL
by default, whereas, if both are enabled, mbedTLS is preferred over
PolarSSL.
However, crypto support is not mandatory and support for both libraries
can be turned off. Therefore, optionally depend on mbedTLS or PolarSSL
and enable/disable the library support explicitly.
This fixes the issue of searching for PolarSSL altough the dependency is
not declared in the bctoolbox package.
Note, that this does not fix the issue why mbedtls is not found although
it is enabled. This issue is address in this thread [1].
Fixes:
http://autobuild.buildroot.net/results/cfe/cfeb2f542598e5d450b332fb51a6d79bae24158c/
.. and more.
[1] http://lists.busybox.net/pipermail/buildroot/2017-February/183055.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5c4d3560b9.
Although the patch fixes the build error it does not set the flags for
Libs.private properly. A follow-up patch will provide a better solution
for this issue.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make license type lists more uniform:
* put content license applies to in parenthesis; ex: "GPLv2+ (programs)"
* use commas to separate types listed without conjuction; ex: "GPLv2, LGPLv2"
No attempt was made to validate the claimed licenses. This is just a tweak
to increase uniformity of the _LICENSE variables.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: replace semi-colons by commas in LIBURCU_LICENSE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select (and use) builroot provided freetype in case qt5base gui is
selected (gui without freetype/font support makes not much sense
and gives compile errors).
Qt 5.6 needs some support to find the include headers, 5.8 is
clever enough inherently.
Fixes [1] (by avoiding the build-in freetype library which depends
on activated libpng support):
Project ERROR: Library 'libpng' is not defined.
make[3]: *** [sub-3rdparty-freetype-make_first] Error 3
[1] http://autobuild.buildroot.net/results/219162ba616289f799a5053c4dcc6b8574284283
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The imx6sx-udoo-neo dts patches have been upstreamed in kernel 4.10,
so bump to this version and remove the local patches.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch 0006-fix-client-gfx_state-initialisation.patch
add the initialisation for the variable gfx-state.
This patch was provided by the community and it is already
integrated in OpenEmbedded.
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/197/197ab8a12bf1d780a986e5d447d1e0f5ee070405/
qt5.8 no longer supports ARMv4. From src/corelib/global/qprocessordetection.h:
if Q_PROCESSOR_ARM >= 6
define Q_PROCESSOR_ARM_V6
endif
if Q_PROCESSOR_ARM >= 5
define Q_PROCESSOR_ARM_V5
else
error "ARM architecture too old"
[Peter: also hide comment as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
(quad A53), 8/16GB eMMC and 1/2GB RAM.
Both the s905 (gxbb) and s905x (gxl) variant is supported.
This defconfig uses mainline Linux. As the mainline support for s905 is
quite young, use the latest release candidate. There is currently no
support for this board in U-Boot or sources available for the vendor U-Boot,
so the defconfig doesn't build a u-boot and instead uses the existing U-Boot
available in the eMMC. This also means that we need to wrap the kernel as
uImage, which isn't suppported for aarch64. Instead this is done in the
post-build script.
Mainline aarch64 defconfig builds most drivers modular, so add mdev for
module autoloading.
[Peter: explicitly set BR2_cortex_a53=y]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly set the ERL_TOP environment variable to override values set
on a user's system. This prevents Erlang's configure scripts from
using source files outside of the ones that Buildroot downloaded.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The initial fix for this issue, re-including stdbool.h, is not
working.
Instead, fix using the method used for other packages with a similar
problem: add -std=gnu99, which prevents bool from being redefined and
removes the need for any source code change.
Fixes: 64904f0f6d
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julian only ever sent one patch to freerdp, the one adding it, in 2012.
I'm somewhat interested in this package, so I'll adopt it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gstreamer has moved to build time unaligned access support detection using
ifdefs in gstconfig.h since 1.9.2:
commit 6ef601367e0f5adb7a8b02cec94dec04fccf701a
Author: Nirbheek Chauhan <nirbheek@centricular.com>
Date: Tue Jun 21 18:59:49 2016 +0530
gstconfig.h: Detect unaligned access support at compile-time
This makes gstconfig.h completely arch-independent. Should cover all
compilers that gstreamer is known to build on, and all architectures
that I could find information on. People are encouraged to file bugs if
their platform/arch is missing.
So ac_cv_unaligned_access is no longer used and our logic can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- update to released kernel and U-Boot,
- move the headers config closer to the kernel ones,
- update readme.txt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add two patches that fix build with musl. The first patch is upstream. The
second patch uses the Buildroot workaround to suppress conflicting struct
ethhdr definitions.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There does not appear to be a way to configure the example code
installation, so this mod gets rid of it with a post-install hook.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From http://www.openwall.com/lists/oss-security/2017/02/16/4
The latest dbus release 1.10.16 fixes two symlink attacks in
non-production-suitable configurations. I am treating these as bugs
rather than practical vulnerabilities, and very much hope neither of
these is going to affect any real users, but I'm reporting them to
oss-security in case there's an attack vector that I've missed.
No CVEs assigned so far.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
Update ioctl patch since it's still required to build for musl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to glibc 2.18, definitions like SIZE_MAX or INT_FAST32_MAX from
<stdint.h> were only made available for C code, or in C++ if
__STDC_LIMIT_MACROS was defined.
The code from jasper uses such definitions, without defining
__STDC_LIMIT_MACROS. Unfortunately, defining __STDC_LIMIT_MACROS in
the jasper headers doesn't work, since <stdint.h> has already been
included before, at a point where __STDC_LIMIT_MACROS was not defined.
So to solve this problem, we simply pass -D__STDC_LIMIT_MACROS in
CXXFLAGS when building libraw with jasper support.
Fixes:
http://autobuild.buildroot.net/results/908aef6c82d56060933713df217b6b2ba21a01b0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The raptor package installs some libraries, which will be useful for
upcoming packages parts of librdf.org, such as rasqal and redland.
Signed-off-by: Erwan Gautron <erwan.gautron@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The generic code now knows how to extract .tar.lz archives. Remove the local
extract code.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit teaches the generic package handling code how to extract .tar.lz
archives. When lzip is not installed on the host, host-lzip gets built
automatically.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't special case $(XZCAT) when constructing DL_TOOLS_DEPENDENCIES. The next
commit will introduce another extractor that automatically builds when not
installed. Introduce EXTRACTOR_DEPENDENCY_PRECHECKED_EXTENSIONS that lists
archive extensions for which the extractor is already checked in
support/dependencies/check-host-foo.mk. Use this in the newly introduced
extractor-dependency to populate DL_TOOLS_DEPENDENCIES.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: add missing space after "firstword", as noticed by Thomas DS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MPD version 0.20 being affected by GCC PR libstdc++/64735 means no mpd package
available in Buildroot for the architectures NIOSII, ARMv4, ARMv5 and SPARCv8
until GCC 7 is released.
As the next Buildroot release is in 2017.02, which is before GCC 7 is expected
to be finished we add hidden config symbols to select the version branch to use.
Note, that we bumped the version from 0.19 to 0.20 quite recently within the
current Buildroot release cycle. This way we can keep the support for mpd on
the affected architectures, like ARMv5, until GCC 7 is out.
Note, that for the version 0.19 MPD requires libglib2.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop all patches since they're upstream, yay!
Switch to the gnome mirror since it's more handy than github, and it
also allows to drop autoreconf since it's a distribution tarball with
the configure script is already generated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release 0.1.2 claimed to fix an issue with requesting both types of
line events, but actually didn't. This time it's really fixed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cups configure script checks for a pkg-config program. If host-pkgconf
has not been built prior to cups, it uses the system pkg-config, which
might potentially lead to bogus results:
checking for i586-buildroot-linux-musl-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
With this patch applied:
checking for i586-buildroot-linux-musl-pkg-config... no
checking for pkg-config... /home/thomas/projets/buildroot/output/host/usr/bin/pkg-config
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cbootimage uses non-standard u_intXX_t types instead of the C99 types
uintXX_t types, which prevents it from building with the musl C library.
A patch to fix this has been submitted upstream, but since there are
many many occurences of such types, the patch is a bit large to carry in
Buildroot, especially compared to the fact that having this package
building against musl is probably not a top priority.
So for now, simply disable this package on musl, until upstream fixes
the issue and releases a new version.
Fixes:
http://autobuild.buildroot.net/results/61bdfb7e0ff9628190d9eb86e40c4c90e768b8e2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When GCC_COLORS is set, ccache passes '-fdiagnostics-color' to GCC but
this flag requires GCC v4.9 or later. Older versions complain about the
unrecognized command line option.
Using GCC_COLORS in the context of Buildroot is seldom useful, so we
just unexport GCC_COLORS altogether.
Reported-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jann Horn, Project Zero (Google) discovered that ntfs-3g, a read-write
NTFS driver for FUSE does not not scrub the environment before
executing modprobe to load the fuse module. This influence the behavior
of modprobe (MODPROBE_OPTIONS environment variable, --config and
--dirname options) potentially allowing for local root privilege
escalation if ntfs-3g is installed setuid.
Notice that Buildroot does NOT install netfs-3g setuid root, but custom
permission tables might be used, causing it to vulnerable to the above.
ntfs-3g does not seem to have a publicly available version control system
and no new releases have been made, so instead grab the patch from Debian.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
- CVE-2016-1248: vim before patch 8.0.0056 does not properly validate values
for the 'filetype', 'syntax' and 'keymap' options, which may result in the
execution of arbitrary code if a file with a specially crafted modeline is
opened.
- CVE-2017-5953: vim before patch 8.0.0322 does not properly validate values
for tree length when handling a spell file, which may result in an integer
overflow at a memory allocation site and a resultant buffer overflow.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the gnuradio gr-audio option selects an audio backend by
default, it is no longer needed to depends on BR2_PACKAGE_ALSA_LIB or
BR2_PACKAGE_PORTAUDIO in the qgrx package.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gr-audio may be built with alsa-lib or portaudio support. To simplify
dependencies if no backend is selected, we automatically select alsa-lib
as the default audio backend if portaudio is not enabled.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to the patches we have on wget 1.19, we need to
autoreconf. Unfortunately, when the autoreconfiguration process occurs
with host-gettext already built and installed, the build of wget fails
with a fairly weird error:
In file included from str-two-way.h:44:0,
from c-strcasestr.c:37:
./stdint.h:89:5: error: #if with no expression
#if
As explained in http://git.net/ml/bug-gnulib-gnu/2017-01/msg00067.html
and the links pointed by this page, this is due to an incompatibility
between the newer version of gnulib used in wget, and an older .m4 file
in gettext.
In the context of Buildroot, the easiest way to avoid the issue is to
not autoreconf wget. The wget project has conveniently released a 1.19.1
release, which contains our two patches, plus just one small feature
addition. It is therefore reasonable to apply this as a solution to this
build issue.
Fixes:
http://autobuild.buildroot.net/results/b62ac6fd5ce36453935c309e112262467cf0e3bf/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use comm(1) to check that all our config options are properly set in the
resulting configuration, rather than our canned and fragile code.
Reported-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gqrx is an open source software defined radio (SDR) receiver implemented
using GNU Radio and the Qt GUI toolkit. Currently it works on Linux
and Mac with hardware supported by gr-osmosdr, including Funcube Dongle,
RTL-SDR, Airspy, HackRF, BladeRF, RFSpace, USRP and SoapySDR.
Gqrx can operate as an AM/FM/SSB receiver with audio output or as an
FFT-only instrument. There are also various hooks for interacting
with external application using network sockets.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove unneeded dependency from Config.in, inherited from Qt5
- add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop both patches since they are included upstream.
We don't need to autoreconf now.
Note: classpath 0.99 has a bug in it's autoconf scripts, such that
configure always fails when specifying --disable-tools[1].
We enable these for now.
Also explicitly disable GJDoc generation, as this defaults to on now.
--disable-plugin is not needed any more, since this is now the default.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=70660
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update patch 0001-Adjust-for-buildroot-build.patch to
use real static linking (command line flag '-static' for
target gpio-static).
Fixes [1]:
[Link]
.../output/host/usr/lib/gcc/powerpc-buildroot-linux-uclibc/5.4.0/libgcc.a(unwind-dw2-fde-dip.o): In function `_Unwind_Find_FDE':
...output/build/host-gcc-final-5.4.0/build/powerpc-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde-dip.c:465: undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
make[1]: *** [gpio-static] Error 1
make[1]: Leaving directory `.../output/build/wiringpi-2.32/gpio'
[1] http://autobuild.buildroot.net/results/b905617dda0e120d04c54daf7cae2bad236ac767
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a CPU definition for the Cortex A7 along with improvements described
here: http://wiki.qemu-project.org/ChangeLog/2.8
Tested on an ARM Cortex A7 target (both target and host builds). The change log
does not describe any incompatible changes that would affect buildroot targets
as far as I am aware.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The motion autotools script helpfully detects the host
Microprocessors intr set and optimizes for it.
Disabling this feature causes autotools to use the
target parameters passed by BR instead.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script helps in testing that a package builds fine on a wide range
of architectures and toolchains: BE/LE, 32/64-bit, musl/glibc/uclibc...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- completely rewrite the script from Thomas, with help from Luca
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As now the Qt version is configurable to simplify the menu display
logic we remove the menu comment about deprecated modules and
indicate it in the relevant modules' help text instead, and also
mention in the help text if a package's tech preview status has been
changed between Qt 5.6 and Qt 5.8
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rework done on commit
accba02a47 ("toolchain: add option for
toolchains affected by GCC PR libstdc++/64735") by me was wrong. The
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 option should be enabled when the bug is
present in the toolchain, not the opposite.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit f29bb169cf (libevent: fix openssl detection when statically linking)
forced libevent to link against zlib when statically linking against openssl
as the configure script failed to do this.
Since then libevent has been bumped, and it now uses pkg-config to figure
out how to link with openssl, so ensure pkg-config is available and drop the
now-unneeded workaround.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1e7/1e7027b1b87d88b4517b1b19d3a2ae54c24f2c10/http://autobuild.buildroot.net/results/ff7/ff7e010b41e7448d15d20396e9e9bd7319dd493b/http://autobuild.buildroot.net/results/269/269a3a76f61c65423ba703a85e94cc003fb75e4c/
Libevent/libtool gets confused by the library order when statically linking
the sample programs and passes -lz before -lcrypto even though libcrypto
uses zlib.
/bin/bash ./libtool --tag=CC --mode=link .. -o sample/https-client \
sample/https-client.o sample/hostcheck.o \
sample/openssl_hostname_validation.o libevent.la \
libevent_openssl.la -lssl -lcrypto -lz -lz -lcrypto
libtool: link: .. -o sample/https-client sample/https-client.o \
sample/hostcheck.o sample/openssl_hostname_validation.o \
./.libs/libevent.a ./.libs/libevent_openssl.a \
-lssl -lz -lcrypto
../libcrypto.a(c_zlib.o): In function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x30): undefined reference to `inflate'
This is most likely fixable, but as the sample programs aren't installed /
used, simply skip building them to save time and work around this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-5357: crash with some malformed commands.
Upstream now provides .tar.lz archive. Add the necessary extract command.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ftp.netroedge.com is (also) down. Download the package from the Debian
snapshot archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable fakedate for whole build process.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
`date' is widely used by packages to include build information in their
binaries. Unfortunately, this is incompatible with BR2_REPRODUCIBLE.
Instead of having to identify all `date' invocations in the different
packages, this commit adds a small tool that allows to always return
the same date.
This work was sponsored by `BA Robotic Systems'.
[Peter: drop debugging print]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The use of the __DATE__ and __TIME__ macros are one of the most common
sources of non-reproducible binaries. In order to fix that, gcc 7 supports
the SOURCE_DATE_EPOCH variable:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934
This patch take advantage of toolchain-wrapper to provide support of
SOURCE_DATE_EPOCH to older gcc versions.
Function get_source_date_epoch() come directly from gcc git.
This work was sponsored by `BA Robotic Systems'.
[Peter: use sizeof for character array sizes, make function static,
extend commit message, add upstream gcc commit]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When pyqt is used it's obvious that qt needs to be selected and
configured by the user, hence we enforce it by making pyqt depending on
qt, rather than selecting it and depending only on the qt requirements.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When pyqt5 is used it's obvious that qt5 needs to be selected and
configured by the user, hence we enforce it by making pyqt5 depending on
qt5, rather than selecting it and depending only on the qt5
requirements.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Restrict target install to quickcontrols(1) qmls only.
Installing everything under qml/QtQuick includes e.g. quickcontrols2 if
existent in staging (but not selected). Another issue may arise e.g. for a
external package that creates more files than it installs itself under
qml/QtQuick. In that case, it would depend on the order of the packages how
much gets installed into target.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For 5.8.0
- add hashes
- qt5 need C++11 compliant compiler since 5.7 ([1])
- use different licenses: since version 5.7 Qt removed the LGPL v2.1 option in favor
of v3 with a different exception
- qt5base: renamed library to EglFSDeviceIntegration ([2])
- qt5base: remove ras-pi patch, commit c0cc5052097c723d0331a7619d686af9eb93d33c fix it ([3])
- qt5base: remove 0007-eglfs-fix-eglfs_mali-compile-for-odroid-mali.patch (upstream committed [3b])
- qt5base: remove obsolete config-option -large ([4])
- qt5base: gstreamer support fully moved to qt5multimedia, so gstreamer
related options are no longer passed ([5])
- add patch for python-pyqt5 to fix the build with Qt 5.8
- add tweak in libv4l to fix the build with Qt 5.8, originally provided
by Peter Seiderer
- add patch from Peter Seiderer fixing a build issue with freetype
For 5.6.2
- moved patches to subdir, and renumber patches
[1] http://blog.qt.io/blog/2016/06/16/qt-5-7-released/
[2] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=ec4eb4db61094179bc6a9ec26ec68fb710177053
[3] https://codereview.qt-project.org/#/c/167172/
[3b] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=f1b4bd4790860e1ff5afcec111a359bc3a91cfda
[4] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=84d3a21c9efe7efb2cce6d3bd14af1f9580b1108
[5] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=7d4da559afb62a779b3d90a65fb679cb5433f203
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- tweak commit log about GStreamer related changes, suggested by Arnout
- move the gcc 4.8 dependency from the main qt5 option to just the
qt5.8 selection, so that qt5.6 can still be built if gcc < 4.8 is
used. Noticed by Arnout.
- rename the options of the version selection to not include the
version number itself so that we don't have to keep legacy
symbols. Noticed by Arnout.
- introduce changes to qt5quickcontrols2.mk needed to handle qt5.6
vs. qt5.8, borrowed from a later patch in the series.
- add patch for python-pyqt5 to fix the build with Qt 5.8.
- add fix to libv4l.mk from Peter Seiderer to fix the build with Qt
5.8.
- renumber patches for 5.6.2, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selinux is currently disabled staticly in logrotate. This patch fixes
this by checking for libselinux and adding it as a dependecy if it has
been selected.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed both patches as they have been added to this release.
Aslo removed reference to github patch in makefile as it has been
added to this release as well.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version of ntp fixes several vulnerabilities.
CVE-2016-9311
CVE-2016-9310
CVE-2016-7427
CVE-2016-7428
CVE-2016-9312
CVE-2016-7431
CVE-2016-7434
CVE-2016-7429
CVE-2016-7426
CVE-2016-7433
http://www.kb.cert.org/vuls/id/633847
In addition, libssl_compat.h is now included in many files, which
references openssl/evp.h, openssl/dsa.h, and openssl/rsa.h.
Even if a you pass --disable-ssl as a configuration option, these
files are now required.
As such, I have also added openssl as a dependency, and it is now
automatically selected when you select ntp.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have two places where we recommend where BR2_DL_DIR
should be set: "Environment variables" and "Location of downloaded
packages". The former recommends setting BR2_DL_DIR in the .config,
the latter kind of endorses using ~/.bashrc.
We prefer suggesting the ~/.bashrc way since it avoids downloading the
same file multiple times, and anyway it's wise to have all the details
in a unique place. So remove the .config suggestion from "Environment
variables" and let it just point to "Location of downloaded packages".
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual mentions LIBFOO_GIT_SUBMODULES but does not tell what value
it should have. The implementation only checks whether the variable is
non-empty, but we should suggest a specific value to avoid people
wondering what they have to set, and to try setting weird values.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Ricardo Herrero <ricardo.herrero@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When this qemu nios2 defconfig has been added, the insternal toolchain
used for testing was build with Linux kernel headers 4.9, so
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9 was missing in the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On uClibc, finite, isinf and isnan are not directly implemented as
functions. Instead math.h #define's these to __finite, __isinf and __isnan,
which are real functions.
This confuses the Ruby configure script which use AC_REPLACE_FUNCS to
detect these, as it really checks for a function without including math.h.
Because of the naming difference the checks fail, therefore the symbols
HAVE_FINITE, HAVE_ISINF and HAVE_ISNAN are not defined.
Ruby code relies on those symbols in order to define its own version of
the finite, isinf and isnan functions. Since the symbols haven't been
defined, those definitions cause conflicts with the already-existing
functions.
Fixes:
http://autobuild.buildroot.net/results/f34/f34dc20749c6f6d12c51eddf3ee6c2ef41d7c13d/
[Peter: extend description, add comment in .mk]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcec is a cmake based package. LIBCEC_AUTORECONF is meaningless in
this context.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils-2.27 gas has bug that results in the following kind of build
error when assembling bb[cs]i.l on big-endian xtensa targets:
ieee754-sf.S:237: Error: invalid symbolic operand
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enabling TLS compression may make mbedTLS vulnerable to the
CRIME attack [1]. It should not be enabled unless is is sure CRIME and
similar attacks are not applicable to the particulare situation.
As zlib is probably enabled in most systems, the user might end up with
a vulnerable system without knowing. So, instead of enabling compression
support if the zlib package is available, we make the compression support
a config option. This way, the user has to explicitly enable compression
support and is warned by the help text about the risk.
[1] https://tls.mbed.org/kb/how-to/deflate-compression-in-ssl-tls
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version introduces a lot of bug fixes and some new API
functions.
Additionally, the IIO Daemon is now able to share the local IIO devices
through USB (using FunctionFS).
[Peter: usbd option needs 3.18+ headers, reorder options for menuconfig]
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Automatically build sudo with ldap support when openldap is enabled.
When sudo is built with ldap, /etc/sudoers is only read in for defaults,
all rules need to be provided via ldap which is configured by the user
in /etc/ldap.conf.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds inode tracking to the size-stats script so that hard
links don't cause files to be double counted. This has a significant
effect on the size computation for some packages. For example, git has
around a dozen hard links to a large file. Before this change, git would
weigh in at about 170 MB with the total filesystem size reported as
175 MB. The actual rootfs.ext2 size was around 16 MB. With the change,
the git package registers at 10.5 MB with a total filesystem size of
15.8 MB.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also making it clearer as for what each plugin dependencies are.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: invert conditions to avoid empty ifeq ... else statements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_OPENNTPD has a "depends on !BR2_PACKAGE_NTP" because the
openntpd package conflicts with the ntp package.
So the Config.in comment of openntpd should also not be visible when ntp
is selected. Otherwise the comment will show up when the user has a
non-NPTL toolchain, and once he enables NPTL support, the comment
disappears, but the package option doesn't appear.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow automatic network configuration via systemd-networkd if selected.
If systemd-networkd is enabled and $BR2_SYSTEM_DHCP is set, then create
a .network file to configure the selected network interface via DHCP.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- merge the two patches from Eric into just one
- instead of generating the dhcp.network file completely from the .mk
file, use a template file, and "sed" it with the right network
interface]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although highly recommended to be enabled, EFL's eeze can be disabled
and thus no dependency on libudev or dynamic device management.
Since 'BR2_PACKAGE_HAS_UDEV' has two ways to be satisfied (eudev or
systemd) we can't automatically select it, instead show a comment and
use 'depends on'.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
[Romain:
- Propagate the eeze dependency to enlightenment and efl Wayland
- Remove udev provider from eeze comment in efl's Config.in
- Add comments when eeze is not available]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To reduce the qt5base binary size, we can disable unnecessary features.
Instead of trying to map every qt5base option to buildroot, create a
single config that we can pass any option too. Then append those to the
ones generated by buildroot.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Originally, the opkg sources also contained the tools needed to _create_ an
opkg package. In later releases, this code has been split to a separate
package opkg-utils.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this kernel rev has numerous bug fixes, framework upgrades and new
features added.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this version bump allows usage of hardkernel's secure signatures when
booting a system
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To enable compression support using zlib it is necessary to uncomment
the define for MBEDTLS_ZLIB_SUPPORT in config.h [1].
Note, that enabling TLS compression may make mbedTLS vulnerable to the
CRIME attack [1]. It should not be enabled unless is is sure CRIME and
similar attacks are not applicable to the particulare situation.
As zlib is probably enabled in most systems, maybe it is best to make
the compression support a user choice and add the warning from [1]?
[1] https://tls.mbed.org/kb/how-to/deflate-compression-in-ssl-tls
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of a 'rule' variable that can contain 'show-depends' or
'show-rdepends' is not logical if get_depends is considered as a reusable
function from various scripts. The name of these rules are too much an
implementation detail.
Therefore, split the existing get_depends into two separate functions
get_depends and get_rdepends, while keeping code duplication to a minimum.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Functions to obtain the version and dependencies of a package from Python
can be useful for several scripts. Extract this logic out of graph-depends
into pkgutil.py.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove shebang from pkgutil.py, noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gunicorn ‘Green Unicorn’ is a Python WSGI HTTP Server for UNIX. It’s a
pre-fork worker model ported from Ruby’s Unicorn project. The Gunicorn
server is broadly compatible with various web frameworks, simply
implemented, light on server resource usage, and fairly speedy.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google deprecated feed api to cenvert rss to json, switching
to yahoo yql. This patch also reorganize the javascript code
to accomodate the fixings.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove 0001-Include-stdint.h-where-needed.patch as it was merged into
the tree.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function get_depends was recently changed to support both normal
dependencies as reverse dependencies, via a global variable 'rule' that
equals 'show-depends' or 'show-rdepends'.
As a subsequent function will extract this function get_depends to a
separate file, the use of globals is problematic.
Instead, pass the global as an argument.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sync external prebuilt toolchain with the one we now build in Buildroot,
i.e. arc-2016.09. Since that prebuilt toolchain finally has IPv6 enabled
it works pretty fine for building packages in Buildroot.
Still note:
1) There might be subtle differences between uClibc configuration
compared to Buildroot's one.
2) A couple of patches we apply on top of Builroot-built toolchain
are obviously missing in the prebuilt version - they will be
available in the next release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vlad Zakharov <vzakhar@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I also modified the Disable-building-test-programs.patch to work
with the newer Makefile.
[Peter: add s-o-b / note to patch]
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This updates Linux kernel for Synopsys ARC HS38 VDK so it matches real
platform and while at it bump kernel version to the latest.
Main changes:
* Linux kernel v4.9.6 (latest in 4.9.x series in buildroot)
* Add support of MMC controller which is used for rootfs
* Add support of UIO which is used to communicate with EVSS
Now with this update image built by vanilla Buildroot VDK has
working UART, MMC, LCD, Ethernet, UIO etc.
And while at it we rename defconfing so it:
1) Doesn't mention SMP any more - that's the only option anyways now
2) Matches common naming scheme: vendor_arch_platform
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Zakharov Vlad <Vladislav.Zakharov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
getgetopt generates code that causes compilation warnings in current
versions of gcc. If gengetopt is used for programs that set -Werror during
compilation, these compilation warnings become real problems.
Unfortunately, the gengetopt project seems dead for several years now. Last
release dates back to 2012. There is an open bug for this problem [1], with
a proposed patch, but no response from the maintainers.
Apply the patch from the bug report to fix the problem.
[1] http://savannah.gnu.org/bugs/?40243
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump squashfs with one commit to fix a compilation error on the ancient RHEL
5 distribution.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a small bug-fix release:
- include <poll.h> instead of <sys/poll.h> in gpioset
- fix a formatting issue in gpioinfo for chips with >100 GPIO lines
- fix a bug when requesting both-edges event notifications
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc-ng from 1.0.22 and up supports aarch64 architecture.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The config for ISA choice is removed for a long time as
the buildsystem does not pass -march=mips* to the compiler anymore.
For mips{32,64}r6 support NAN selection is required.
Tested with qemu mips32/mips64 defconfigs.
A small patch is required. Bug found while testing qemu defconfigs.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fixes mips{32,64}r6 support
- adds experimental aarch64 support
- fixes syscalls with 6 arguments for x86
- removes PID caching and simplifies architecture specific code
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Updated the zmq version detection patch to apply cleanly on 16.0.2.
Added patch #2 to replace compile_and_run with compile_and_forget in the setup
code: this function is only used to check for the availability of "sys/un.h" and
we only need to compile the test code to make sure of that. This fixes the
cross-compilation.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot has a mechanism to detect a too-old or missing tar program on the
host machine, and builds a custom host-tar if needed. An example situation
is a RHEL5 host machine, where tar is knowingly too old.
The apply-patches script also employs tar, in case the patches come as an
archive. However, tar is called as 'tar' without any absolute path, and the
environment does not point in any way to the possibly custom tar. As a
result, the too-old-tar is called. A particular problem is the flag '-a'
which is missing on e.g. RHEL5.
Previously, this problem went unnoticed: tar would fail, but apply-patches
did not notice it, and the overall return code of the script was 'success'.
However, commit d5ae67b4 added 'set -e' to the script, causing any error to
halt execution of the script with an error.
Fix the problem by adding the Buildroot-built host tools to the PATH when
calling apply-patches.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The originally added entries were based on 'last committer' heuristics, but
I do not particularly feel responsible for them.
Instead update the list with more appropriate entries.
Additionally, update my email address.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the sponsors page on our web site to indicate that
Google and Mind are sponsoring the Buildroot Developers Meeting at
FOSDEM 2017 in Brussels.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.9.7 has an important fix: a2104c7cd3b24c432 ("drm/atomic:
clear out fence when duplicating state"), which fixes a kernel
warning that triggers sometimes when starting/stopping ksmcube
application several times in a row.
So bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.9.6 2.6.0 YES OK (3)
arm_versatile 4.9.6 2.5.0 YES OK
arm_versatile_nommu 4.4.45 2.5.0 YES OK
arm_vexpress 4.9.6 2.5.0 YES OK
m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
microblazebe 4.9.6 2.5.0 YES OK
microblazeel 4.9.6 2.5.0 YES OK
mips32r2el_malta 4.9.6 2.5.0 YES OK
mips32r2_malta 4.9.6 2.5.0 YES OK
mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
mips32r6_malta 4.9.6 2.6.0 YES OK (3)
mips64el_malta 4.9.6 2.5.0 YES OK
mips64_malta 4.8.17 2.5.0 YES OK (6)
mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
nios2-10m50 4.9.6 2.9.0 NO OK
or1k 4.9.6 2.5.0 NO OK
ppc_g3beige 4.9.6 2.5.0 YES OK
ppc_mpc8544ds 4.9.6 2.5.0 YES OK
ppc_virtex_ml507 4.9.6 2.5.0 NO OK
ppc64_pseries 4.9.6 2.5.0 YES OK
sh4 4.9.6 2.5.0 YES OK
sh4eb 4.9.6 2.5.0 NO (1) OK
sparc_ss10 4.9.6 2.5.0 YES OK
sparc64_sun4u 4.9.6 2.5.0 YES OK
sparc_sun4u 4.9.6 2.5.0 YES OK
x86 4.9.6 2.5.0 YES OK
x86_64 4.9.6 2.5.0 YES OK
xtensa_lx60 4.8.17 2.6.0 YES OK (6)
xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.
Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes:
* Buildroot defconfig
* Mainline Linux kernel v4.9.6
* Mainline U-Boot (current HEAD revision is used, as board support
patches are not in stable release yet)
* genimage config to create sdcard image
* Board readme.txt
[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch download URL to match the website and avoid issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minimalistic C client for Redis >= 1.2
It is minimalistic because it just adds minimal support for
the protocol, but at the same time it uses a high level
printf-alike API in order to make it much higher level than
otherwise suggested by its minimal code base and the lack of
explicit bindings for every Redis command.
https://github.com/redis/hiredis
[Peter: use install -t / -D, fix arguments]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install also lxc in staging directory, this will be needed for the
incoming integration of lxd package. Moreover, other packages could
find useful to integrate with liblxc instead of using lxc-xxx binaries.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lxc can use gnutls for various checksumming so add a dependency on it if
package is selected
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: git is a runtime dependency, use pkg-config for openssl
dependencies, use make install]
Signed-off-by: Francesco Negri <francesconegri@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
* Mitigate DoS attacks that use client-initiated SSL/TLS renegotiation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needed when wayland support is enabled in xserver_xorg-server.
This patch fixes the final build error:
Making all in xwayland
make[3]: Entering directory '/home/buildroot/br5/output/build/xserver_xorg-server-1.19.0/hw/xwayland'
make[3]: *** No rule to make target '/usr/share/wayland-protocols/unstable/relative-pointer/relative-pointer-unstable-v1.xml', needed by 'relative-pointer-unstable-v1-client-protocol.h'. Stop.
when trying to build
http://autobuild.buildroot.net/results/cf0/cf026e9b18e86b9890341612050f4d166a7b822d/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perl-gd now supplies a Build.PL, but this one is not cross-compilation
friendly. So, we still use Makefile.PL like in previous version by using
the new <pkg>_PREFER_INSTALLER variable.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed the 3 patches as they have been added into the latest
version.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix license, it's MIT, not BSD
- use TARGET_CONFIGURE_OPTS instead of manually passing CC and AR
- use full destination path
- keep only sha256 hash
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway's voicemail plugin is only built if
libogg is selected, and even then there is no way to disable the plugin from
being built. This causes a example config file to be placed on
the target filing system that the user may not need or want, creates a 33K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the voicemail plugin optional, removes the check for libogg,
adds libogg as a dependency to the voicemail plugin, and selects the libogg
package automatically when the user selects the plugin.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the video room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the video room plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the video call plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the video call plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the text room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 63K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the text room plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the streaming plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 133K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the streaming plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the record and play plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 68K .so
file on the target directory, and janus will also create a warning when ran
if the plugin does not have a matching configuration file setup by the user,
as it will not use the example config file by default.
This patch makes the record and play plugin a option.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the echo test plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 36K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the echo test plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the audio bridge plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 119K .so
file on the target directory, adds the dependency of opus for this
plugin, and janus will also create a warning when ran if the plugin does
not have a matching configuration file setup by the user, as it will not use
the example config file by default.
This patch makes the audio bridge plugin a option, removes the check for opus,
adds opus as a dependency to the audio bridge plugin, and selects the opus
package automatically when the user selects the plugin.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway requires sofia-sip in the build system,
however this is unessasary. This patch makes the sip gateway plugin a
option. It also creates a menuconfig for janus gateway for the
following patches that enable selecting more optional plugins.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway currently depends on several dependencies that are not
mandatory. This commit removes all non-mandatory dependencies. The
build has been tested to work fine with this reduced set of
dependencies.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit updates comments in Config.in for BR2_USE_WCHAR for reverse
dependencies of util-linux which directly uses wchar now or when it is
pulled from other dependencies.
eudev doesn't use wchar directly, but needs C99 compiler. Autotools
generate code with wchar_t for checking C99 compiler.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit fixes all such reverse dependencies by removing dependency
on BR2_USE_WCHAR as it is not required by package itself.
Fixes: 006a328ad6 ("util-linux: fix build with ncurses")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Usually, Buildroot does never initialize variables with empty content.
DEPENDENCIES_HOST_PREREQ was an unjustified exception.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- manually install things, it's easier than using the flawed install
rules of the package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds yet another development platform for ARC.
This time around it is HAPS or ZeBU based prototyping platform used
widely for both ARC hardware and software bring-up and verification.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is used by buildroot default initscripts and results in some ugly
errors on startup otherwise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.9.6
- set up host linux headers to 4.9
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No announcement was made for this version, so the hash was calculated locally.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ccache doesn't rewrite the --sysroot base_dir from toolchain-wrapper
correctly. Resulting in a large number of cache misses when building
from different base directories.
A fix has already been accepted to the ccache upstream[1], but won't be
released until ccache 3.4. (Was noted as an improvement, so unsure
of the 3.4 release timing)
[1] https://github.com/ccache/ccache/pull/132
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the main command to control oprofile. It was introduced in
version 0.9.8 from 2012-08-27 and in version 1.0.0 the previous
control tool, opcontrol, was removed.
In commit 9863553fe8, removing avr32
support, code that added operf for !avr32 was removed rather than
keeping the code but making it non-conditional.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hook is only used to install firmware blobs, and so it
doesn't need to be declared after the kernel-module infra.
Move it where it belong, to avoid confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gst-plugins-base configure script claims that the subparse plugin is
dependency-less - but it also silently disables subparse if libxml2 is
not available. So depend on libxml2 when subparse is selected.
Note: the analogous gst1 subparse plugin does not have this requirement.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix download location
- remove <pkg>_SOURCE variable, it was the default value
- remove trailing space
- keep only sha256 hash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-3731 - Truncated packet could crash via OOB read.
CVE-2017-3732 - BN_mod_exp may produce incorrect results on x86_64
CVE-2016-7055 - Montgomery multiplication may produce incorrect results
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adam has contributed the python-mutagen and sngrep packages, so add
him as a developer for those two packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep is a tool for displaying SIP calls message flows from terminal.
It supports live capture to display realtime SIP packets and can also
be used as PCAP viewer.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- ncurses wide char and other sub-options are not needed to build
sngrep, so they are removed, as well as the wchar
dependency. ncurses with wchar support is only needed when
--enable-unicode is passed, but even then, it doesn't work because
the configure script searches <ncursesw/ncurses.h>, so unicode
support has been explicitly disabled.
- add optional dependencies on OpenSSL, GnuTLS and PCRE. This also
makes sure they are explicitly enabled/disabled depending on the
configuration.
- add upstream URL in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mutagen is a Python module to handle audio metadata.
It supports ASF, FLAC, MP4, Monkey’s Audio, MP3, Musepack, Ogg Opus,
Ogg FLAC, Ogg Speex, Ogg Theora, Ogg Vorbis, True Audio, WavPack,
OptimFROG, and AIFF audio files. All versions of ID3v2 are supported,
and all standard ID3v2.4 frames are parsed.
It can read Xing headers to accurately calculate the bitrate and
length of MP3s. ID3 and APEv2 tags can be edited regardless of
audio format. It can also manipulate Ogg streams on an individual
packet/page level.
Mutagen works with Python 2.7, 3.3+ (CPython and PyPy) on Linux,
Windows and macOS, and has no dedependencies outside the
Python standard library.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license, it's GPLv2, not LGPLv2+
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
You can bootup a OpenRISC system, networking is not working.
[Peter: drop unneeded _GETTY_PORT="ttyS0" setting]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpcre is needed at runtime not a buildtime. Indicate this in Config.in
and remove MICROPYTHON_LIB_DEPENDENCIES.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While bumping fix async feature related issue:
Both asyncsupport.py and asyncfilters.py use async feature, that is
not available in Python 2 and some features available in Python 3.6.
So in both cases *.py compilation would produce compiler errors.
Hence remove both files after package extraction.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bug-fix release that addresses the musl libc compatibility
issues encountered with buildroot.
We can also remove the patch which got merged upstream.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As recently discussed on the list:
http://lists.busybox.net/pipermail/buildroot/2017-January/182147.html
eudev no longer has legacy user space firmware loading and the
--with-firmware-path configure flag since the 3.1.3 release:
commit 3b717594600fa717cdf9bcfd0c7c1b703b245482
Author: Kay Sievers <kay@vrfy.org>
Date: Mon Sep 1 09:07:49 2014 -0400
udev: remove userspace firmware loading support
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
So drop it from EUDEV_CONF_OPTS to limit confusion.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 46d6aa520f.
Since commit 7c60211ce3 (tslib: needs kernel headers 3.12)
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 is always enabled when building tslib. No
need to check for that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- keep only sha256 hash, not needed to have md5 and sha1 when sha256 is
provided
- add BR2_USE_MMU dependency, since the program uses fork()
- remove UDPXY_MAKE_OPTS, and use the appropriate options during the
build and install steps directly
- use TARGET_MAKE_ENV in the build and install steps]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit also adds a patch that allows libselinux 2.6 to build
properly with older compilers such as gcc 4.4.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: add patch to fix gcc 4.4 build issue.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When SELinux support is enabled, the login pam file installed by
linux-pam should be adjusted to use the pam_selinux.so module.
To achieve this in a reasonably simple manner, we introduce the SELinux
related lines in login.pam as comments, and if SELinux support is
enabled, turn those commented lines into real lines.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using += is always a good idea in conditional assignments, as it
prevents potential future mistakes if unconditional options are added;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As it happens, specifying the path where to look for libsrtp is not
needed: pjsip does not use the argument to --with-external-srtp as a
search path at all; it only checks whether it is 'no' or something
else.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are a bunch of options that are left unspecified; explicitly
disable them.
The epoll case is special: the configure script is broken, and will
enable it whether we pass --enable-epoll or --disable-epoll. But that's
OK because we prefer epoll over the alternative (select). So we do not
need to fix it. Which is nice becasue the configure.ac is named
aconfigure.ac (yes, with a leading 'a'), so it does not autoreconf
nicely... :-/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flask-Babel is an extension to Flask that adds i18n and l10n support
to any Flask application with the help of babel, pytz and
speaklater. It has builtin support for date formatting with timezone
support as well as a very simple and friendly interface to gettext
translations.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Fix second Ethernet port for SoloX
- Fix LCD disable sequence
- Fix LVDS2 as primary display
Here are the main Linux modifications:
- Rebase on top of NXP 4.1.15_2.0.0 branch
- Fix touch screens interrupt conflicts
- Backport tw686x features from mainline
- Fix multiple ft5x06 touch instantiation
- Fix dirty cow vulnerability
- Various improvements to TC358743 driver
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The micropython libs load libpcre dynamically using the foreign function
interface (libffi). Without pcre the build will succeed but at run time
anything that uses the 're' module will have issues.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The install step now requires CROSS_COMPILE as some C files are
generated at install time. Also remove patches that have been applied
upstream.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop libbsd support, it's problematic and doesn't bring in any greater
benefit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
wnpa-sec-2017-01 - The ASTERIX dissector could go into an infinite loop.
wnpa-sec-2017-02 - The DHCPv6 dissector could go into a large loop.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The RPM package requires dynamic linking support (dlfcn.h) for its
capabilities related to plugins (and possibly more). The following
commit adds a dependency to !BR2_STATIC_LIBS.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-password-save option has been removed
(9ffd00e754). Since
it now defaults to "enabled" in the upstream package, there is no
point in adding Config.in.legacy support for it: Config.in.legacy
logic only kicks in when the option is enabled, but the upstream
package precisely preserve the compatibility with this situation.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2f89476 ("package/libgpg-error: bump to version 1.23") introduced
a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS which was added as a dependency
to all libgpg-error reverse dependencies.
However, rng-tools only select libgpg-error if BR2_i386 || BR2_x86_64
(for RDRAND) but the rng-tools dependency was added as
BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS && (BR2_i386 || BR2_x86_64),
Therefore limiting rng-tools to the x86 architecture.
This patch changes it as ..._ARCH_SUPPORT || !(BR2_i386 || BR2_x86_64).
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ortp now depends on bctoolbox, which means we have to add the C++
dependency of bctoolbox to ortp and its reverse dependencies.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bctoolbox is a utilities library used by Belledonne Communications
softwares like belle-sip, mediastreamer2 and linphone.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add missing dependency on BR2_INSTALL_LIBSTDCPP.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added the pure-ftp quotas option. When selected, the --with-quotas
compiler option is passed which enables the quota feature
Note that this increases the size of the pure-ftpd executable by
about 20%.
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The developper's documentation will be automatically built when doxygen
is present. But we can't guarantee that it is.
Besides, we are not interested in the devlopper's documentation.
Simply disable it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb 7.12+ by default builds with a C++ compiler, which naturally doesn't
work when we don't have C++ support in the toolchain.
Fix it by passing --disable-build-with-cxx for such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On Darwin, user's trust preferences for root certificates were not honored.
If the user had a root certificate loaded in their Keychain that was
explicitly not trusted, a Go program would still verify a connection using
that root certificate. This is addressed by https://golang.org/cl/33721,
tracked in https://golang.org/issue/18141. Thanks to Xy Ziemba for
identifying and reporting this issue.
The net/http package's Request.ParseMultipartForm method starts writing to
temporary files once the request body size surpasses the given "maxMemory"
limit. It was possible for an attacker to generate a multipart request
crafted such that the server ran out of file descriptors. This is addressed
by https://golang.org/cl/30410, tracked in https://golang.org/issue/17965.
Thanks to Simon Rawet for the report.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, mariadb's cmake script tries to detect dtrace support. On
hosts that have dtrace installed, this incorrectly enables dtrace and
causes compile errors.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a package containing a C library and a set of command-line tools
for controlling GPIOs from user space using the new character device
interface on linux.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Thomas:
- add comment about autoreconf=yes (suggested by Romain Naour)
- add more conventional syntax for the --{enable,disable}-tools usage
(suggested by Romain Naour)
- add patch to fix musl build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RunC allowed additional container processes via runc exec to be ptraced by
the pid 1 of the container. This allows the main processes of the
container, if running as root, to gain access to file-descriptors of these
new processes during the initialization and can lead to container escapes or
modification of runC state before the process is fully placed inside the
container.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5a18eabdf0.
It did not take into account all the possible situations. A different fix
will be provided in a forthcomming patch.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-0381: A remote code execution vulnerability in
silk/NLSF_stabilize.c in libopus in Mediaserver could enable an attacker
using a specially crafted file to cause memory corruption during media file
and data processing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop patches now upstream. Also enable internal glob() handling in ash,
as busybox now errors out if this isn't enabled when building for uClibc
because of bugs in the the glob(3) implementation in uClibc and musl since:
commit 3a4cdf45f928de0af09088bbbb96f60d9ac44e87
Author: Denys Vlasenko <vda.linux@googlemail.com>
Date: Wed Dec 21 04:13:23 2016 +0100
ash: error out if ASH_INTERNAL_GLOB is not selected on uClibc
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
compile also open possix
remove power management (compiled by default since commit
b74bbed51b0c0d44b70b136326a8a23cbc64db01)
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes static linking of pifmrds [1]:
host/usr/bin/arm-linux-gcc -static -o pi_fm_rds rds.o waveforms.o pi_fm_rds.o fm_mpx.o control_pipe.o -lsndfile -lm
.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(flac.o): In function `sf_flac_error_callback':
flac.c:(.text+0x44c): undefined reference to `FLAC__StreamDecoderErrorStatusString'
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(ogg.o): In function `ogg_close':
ogg.c:(.text+0x10): undefined reference to `ogg_sync_clear'
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(ogg_vorbis.o): In function `vorbis_read_sample':
ogg_vorbis.c:(.text+0x26c): undefined reference to `vorbis_synthesis_pcmout'
[1] http://autobuild.buildroot.net/results/9b7/9b7638caa8f3e82e38fb68b0321cb649618a0131
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-9317 - gdImageCreate() doesn't check for oversized images and
as such is prone to DoS vulnerabilities.
CVE-2016-6912 - double-free in gdImageWebPtr()
(without CVE):
Potential unsigned underflow in gd_interpolation.c
DOS vulnerability in gdImageCreateFromGd2Ctx()
Signed Integer Overflow gd_io.c
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- move condition to a different place in the .mk file, with other
similar conditions.
- add an 'else' clause to pass -no-libinput in order to explicitly
disable libinput support when the libinput package is not available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.20.x does not depend on libglib2 anymore. Note, that the
dependency on MMU and Thread remain, as MPD uses fork() and thread
functionality.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9576
When the path to a br2-external tree is relative, make enters an endless
recursive loop (paths elided for brevity):
$ make BR2_EXTERNAL=.. foo_defconfig
make[1]: stat: ../configs/../configs/../configs[...]/toto_defconfig: Filename too long
make[1]: *** No rule to make target '../configs/../configs/../configs[...]/toto_defconfig',
needed by '../configs/../configs/../configs[...]/toto_defconfig'. Stop.
Makefile:79: recipe for target '_all' failed
make: *** [_all] Error 2
It is a bit complex to understand the actual technical reason for this
never-ending expansion; it seems it happens in the code generated by the
percent_defconfig macro. Not sure why, though...
But the root cause is the relative path.
Just use absolute, canonical paths to br2-external trees. Always.
[Peter: add bugzilla reference]
Reported-by: outtierbert@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove patch not needed anymore: the bug has been fixed in this release.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1d6/1d6bbef2cb0c8c2e00b6d7511814ff9ddb2e3073/http://autobuild.buildroot.net/results/4c7/4c7fc92a42405e25f41394fa44f5bdc27a4538c4/
Apperently if both icu and nodejs are enabled during the nodejs host build
the nodejs buildsystem gets confused by the icu version installed by
Buildroot (icu 58.2) and the one bundled with the nodejs source tree(icu
57), which ends up in linking-time errors as:
"""
undefined reference to
`icu_58::NumberFormat::format(icu_58::StringPiece,
icu_58::UnicodeString&, icu_58::FieldPositionIterator*, UErrorCode&)
const'
"""
(note the icu_58 in the symbol name while the bundled icu version is 57)
This patch disables the (not used) i18n support in the nodejs host build
config in order to fix the issue. The issue doesn't affect the target build of
nodejs.
[Peter: add autobuilder references]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a critical authentication vulnerability in the MQTT plugin
(CVE-2016-9877):
MQTT (MQ Telemetry Transport) connection authentication with a
username/password pair succeeds if an existing username is provided but the
password is omitted from the connection request. Connections that use TLS
with a client-provided certificate are not affected.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The problem addressed by 0001 patch has been fixed upstream and is that
fix is included in this release:
aa107497cd
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches from 4.8 version don't apply. Update them by backporting
liteBoard support from Linux master branch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is already support in newest U-Boot version, so drop existing
U-Boot patches.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-Fix-Add-missing-pthread.h-include.patch already included in this
release:
5f702b6071
--with-xml-prefix configure option doesn't exist, so drop it:
configure:22815: WARNING: unrecognized options: [snip], --with-xml-prefix
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfixes:
- CVE-2016-9131: A malformed response to an ANY query can cause an
assertion failure during recursion
- CVE-2016-9147: An error handling a query response containing inconsistent
DNSSEC information could cause an assertion failure
- CVE-2016-9444: An unusually-formed DS record response could cause an
assertion failure
- CVE-2016-9778: An error handling certain queries using the
nxdomain-redirect feature could cause a REQUIRE assertion failure in db.c
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use upstream provided tarball.
Upstream switched to cmake.
libjpeg dependency is now optional.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although tremor (the library is named vorbisidec) provides a pkg-config
file, mpd does not use it to find tremor. Since version 0.20 does throw
an error instead of a warning, that's why the issue was left unnoticed
by the autobuilders.
Help mpd to find tremor by providing the path to the library and passing
LIBS through the environment. We use the host pkg-config tool to get the
correct values from the vorbisidec.pc file.
Fixes:
http://autobuild.buildroot.net/results/6b9/6b97403e70caa12c32494b1c82ce61d3e4e456f6/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
[Peter: part 2, boot.scr / defconfig changed accidently got dropped]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build of the ustr package also needs to not run the ldconfig to
prevent a build failure caused by the symlink creating a race condition.
Related commit for target build change was 22069232.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version is marked as "stable" on php-imagick's website, plus is
necessary for the upcoming php-7.1 version bump.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.5.x has been promoted to stable, hence 3.4.x is deprecated and
3.3.x kept as old-stable.
libdane now specifies LGPLv2.1+ so drop the README kludge (which is also
gone regarding licensing).
libunistring is a new dependency, even though gnutls ships a builtin version
we prefer to use unbundled to avoid duplication with other users and target
size growth.
Fixes:
GNUTLS-SA-2017-01 - It was found using the OSS-FUZZ fuzzer
infrastructure that decoding a specially crafted X.509 certificate with
Proxy Certificate Information extension present could lead to a double
free.
GNUTLS-SA-2017-02 - It was found using the OSS-FUZZ fuzzer
infrastructure that decoding a specially crafted OpenPGP certificate
could lead to heap and stack overflows.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-8707 (Fix possible buffer overflow when writing
compressed TIFFS). This CVE fix is included since 7.0.3-9:
fde5f55af9
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove the patch since it's already contained in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3d707d2b (mysql: rename package to oracle-mysql, make a virtual
package) introduced a user selectable virtual BR2_PACKAGE_MYSQL package, but
didn't propagate the (common) dependencies of the two variants to it, so the
virtual package can now be selected even though neither of the variants are
available.
As several packages enable mysql support when BR2_PACKAGE_MYSQL is selected,
this causes a number of autobuilder issues:
http://autobuild.buildroot.net/results/7fe/7fe0d0a3e7ed0430852dc42b718dd037557207e8/http://autobuild.buildroot.net/results/cc4/cc4c2d936f3e1ba6c0a9782b2218de54a4ff75d2/
Fix it by propagating the common dependencies of the two variants to the
virtual package to ensure it cannot be enabled unless at least one of them
are available.
Also move the toolchain comment outside the conditional so it is visible
when mysql isn't available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the KMS video sink element. From the Gstreamer 1.10
release notes:
"New element kmssink to render video using Direct Rendering Manager (DRM)
and Kernel Mode Setting (KMS) subsystems in the Linux kernel. It is oriented
to be used mostly in embedded systems."
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f09b33a0a (qextserialport: fix static build) adjusted the logic for
static builds, but the change contained a typo - It disabled
_INSTALL_STAGING for static builds, not _INSTALL_TARGET.
The autobuilders didn't detect this as nothing links against qextserialport
(so the missing staging install didn't cause issues) and the target install
command was only defined for !static.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent perls are built with the `default_inc_excludes_dot` option.
As many CPAN modules rely on '.' in @INC, the toolchain
must set `PERL_USE_UNSAFE_INC`.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3fd9c062e (nodejs: bump to version 6.9.2) bumped the 6.x version but
forgot to rename the patch directory, so the patches were no longer used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ecore will reach 'upower' using D-Bus system bus in order to detect if
the system state changes and let applications know about the power
state such as low battery or AC power in order to optimize their power
consumption.
For host this is not needed and would not work, since output/host DBus
declares its own output/host/var/run/dbus/system_bus_socket, which has
no dbus-daemon and thus no services in it.
For target it's optional and only installed if BR2_PACKAGE_UPOWER=y,
otherwise it prints error messages about missing upower service.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We unfortunately cannot easily download these because of the file names (not
ending in patch) and patch format (p0), so convert to p1 format and include
in package/bash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Revert the decision to remove the wrappers, but remove the extra
Config symbol and add it by default. Required for kmod package.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security related fixes:
- Heap-based buffer overflow in rfbproto.c in LibVNCClient in LibVNCServer
before 0.9.11 (CVE-2016-9941)
- Heap-based buffer overflow in ultra.c in LibVNCClient in LibVNCServer
before 0.9.11 (CVE-2016-9942)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfixes:
- CVE-2017-5193: Correct a NULL pointer dereference in the nickcmp function
found by Joseph Bisch (GL#1)
- CVE-2017-5194: Correct an error when receiving invalid nick message (GL#4,
#466)
- CVE-2017-5195: Correct an out of bounds read in certain incomplete control
codes found by Joseph Bisch (GL#2)
- CVE-2017-5196: Correct an out of bounds read in certain incomplete
character sequences found by Hanno Böck and independently by J. Bisch
(GL#3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches and related autoreconf.
Re-enable parallel builds to check against the autobuilders.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch #0002 which was already fixed upstream long time ago in
commit 276a0d9500b8efc879e4f0c23e9d0e361849e295 using a slightly
different approach.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update our patches:
- drop patch 1, replaced by an upstream equivalent; adapt config
options and env accordingly,
- drop patch 2, applied upstream,
- rename patch 3
gdlib-config and net-snmp-config are only used when said support is
enabled (resp. CGI and SNMP), so no need to pass them unconditionally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security related fixes:
This flaw is caused by loading data from external sources (file, custom ctx,
etc) and are hard to validate before calling libgd APIs:
- fix php bug 72339, Integer Overflow in _gd2GetHeader (CVE-2016-5766)
- bug #248, fix Out-Of-Bounds Read in read_image_tga
- gd: Buffer over-read issue when parsing crafted TGA file (CVE-2016-6132)
Using application provided parameters, in these cases invalid data causes
the issues:
- Integer overflow error within _gdContributionsAlloc() (CVE-2016-6207)
- fix php bug 72494, invalid color index not handled, can lead to crash ( CVE-2016-6128)
- improve color check for CropThreshold
The build system now enables -Wall and -Werror by default, so pass
--disable-werror to disable that. Notice that this issue has been fixed
upstream post-2.2.3:
https://github.com/libgd/libgd/issues/339
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changed _SITE url to the upstream project site because Sourceforge does
not provide the tarball for 1.2.10 as of now.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enca and libguess options have been dropped so adjust accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Riemann-c-client is a C client library for the Riemann monitoring system,
providing a convenient and simple API, high test coverage and a copyleft
license, along with API and ABI stability.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel versio to 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-8859 - fixes a serious under-allocation bug in regexec due to
integer overflow.
Drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though 'CONFIG_USB=n' does the job, let's switch to the more
standard way for disabling a Kconfig symbol.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream commit a8c696bf09d8151323f6e99348c4bc8989f829c8 makes ifup and
ifdown individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
Add a patch which fixes the dependency by checking for IFUP or IFDOWN,
instead of the obsolete IFUPDOWN.
Upstream status: Pending
http://lists.busybox.net/pipermail/busybox/2016-December/085034.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the minimal configuration file. There is at
least one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the minimal configuration file by loading the busybox.config file
and saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the configuration file. There is at least
one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the configuration file by loading the busybox.config file and
saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a NULL pointer dereference bug in png_set_text_2()
CVE not assigned yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch did contain the correct newlines, but they got stripped by
patchwork so now the patch no longer applies.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The LUAROCKS_TARGET_FINALIZE_HOOKS is not running, so detritus is being left
in /usr/lib/luarocks. This is because host-luarocks is built by being a
dependency in the luarocks package infrastructure, not by being selected by
kconfig symbol. This means that the $(PKG)_KCONFIG_VAR in pkg-generic.mk is
not met, and (HOST_)LUAROCKS_TARGET_FINALIZE_HOOKS is not added to the
global TARGET_FINALIZE_HOOKS.
This mod fixes this issue by adding the host-luarocks hook directly
to TARGET_FINALIZE_HOOKS when either lua or luajit is enabled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use mainline 4.9 instead of a custom kernel based on NXP 4.1.
As mx7 boots in non-secure mode in mainline kernel, change the
U-Boot target to "warp7".
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tar --no-recursion option is position sensitive. It only affects following
file listing options. Move --no-recursion before the -T option to make it
effective. This fixes duplication of entries in the generated rootfs.tar
archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 since it's not fixed in
Binutils 2.26.
Runtime tested with an experimental version of Qemu 2.7 for Nios2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recently, the autoconf macros for libtool started using '/usr/bin/file'
to determine the type of library that is generated by the toolchain.
Packages that use this recent version of the libtool autoconf macros
will fail in a rather dramatic way when /usr/bin/file is not present
on the host: the package will still build but no shared library is
generated, which in turn may cause build failures in other packages
that link with it.
For example, libpng's configure determines that it is not possible to
build a shared library on MIPS64 because the expected output from 'file'
is not present. Therefore, only a static libpng.a is built. Later,
bandwithd links with -lpng but it doesn't use the pkg-config's
Private-Libs (because it's not linking statically) and it doesn't have
access to the NEEDED reference from the shared library. Therefore, it
doesn't link with zlib and fails with
pngrutil.c:(.text+0x55c): undefined reference to `inflate'
We cant use host-file because it is itself an autotools package and is
itself using libtool, so this would be a chicken-n-egg problem. Besides,
the libtool script really wants to call /usr/bin/file, so it would not
even find our host-file anyway.
So, just require that '/usr/bin/file' is present on the host.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The module DB_File (Berkeley DB wrapper) is a Perl core module.
Long time ago, its build as a core module was broken.
Since perl-cross-1.0.2, this issue is fixed.
So, this package which build DB_File as CPAN module, becomes useless.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove all patches as they are upstream.
Remove MALLOC_GLIBC_COMPAT and UCLIBC_HAS_OBSTACK as they got removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No features are added or removed. This release contains
just a fix for CVE-2016-9963
- Fix CVE-2016-9963 - Info leak from DKIM. When signing DKIM, if
either LMTP or PRDR was used for delivery, the key could appear in
logs. Additionally, if the experimental feature "DSN_INFO" was used,
it could appear in DSN messages (and be sent offsite).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At compile-time the docker build scripts generate a version file used
to build the output of the docker version command. This file is
generated somewhat properly by the Buildroot build system, however the
version number and commit ID are incorrectly formatted. This patch fixes
the output to the correct format.
This is important as some tools like WeaveWorks won't even start unless
they can parse the Docker Version output correctly.
[Peter: strip v from version using patsusbt]
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the write_prometheus plugin, it requires the
libmicrohttpd and protobuf-c libraries.
[Peter: add note about where dependencies come from]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the gps plugin that uses libgps from the gpsd
package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libpqos library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libdpdk library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new hugepages dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libgrpc++ library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the mqtt (mosquitto) plugin.
Place it under the write category even though it can read as well, since
it will normally be used to write (publish) rather than read
(subscribe).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new cpusleep dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new chrony dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libxenctrl library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's intended for solaris so no usage case for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a no-op since it's disabled/enabled by the config knob.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new notify_nagios dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-9594 - Unitilized random
Libcurl's (new) internal function that returns a good 32bit random value was
implemented poorly and overwrote the pointer instead of writing the value
into the buffer the pointer pointed to.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which includes the gcc5+ fix for ftrace:
commit aeea3592a13bf12861943e44fc48f1f270941f8d
Author: Behan Webster <behanw@converseincode.com>
Date: Wed Sep 24 01:06:46 2014 +0100
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Otherwise, the build dies with:
arch/arm/kernel/return_address.c:66:7: error: redefinition of ‘return_address’
void *return_address(unsigned int level)
^
In file included from include/linux/ftrace.h:20:0,
from arch/arm/kernel/return_address.c:12:
./arch/arm/include/asm/ftrace.h:48:21: note: previous definition of ‘return_address’ was here
extern inline void *return_address(unsigned int level)
^
For more details, see:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616889
notice: Only build tested as I don't have the hw, which is also why the
kernel is only bumped to 3.18 to make it as safe as possible.
CC: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 006a328ad6 ("util-linux: fix
build with ncurses"), we have a build failure that occurs with musl
toolchains when wide-char support is not enabled in ncurses.
The problem comes from the fact that musl provides wchar support (so it
defines wchar_t). But when ncursesw is not available, we currently pass
--disable-widechar which tells util-linux that wchar support is not
available at all (not only in ncurses). When this gets passed to
util-linux configure script, then it defines its own wchar_t, which
conflicts with the musl definition.
So, we should not pass --disable-widechar when BR2_USE_WCHAR=y, which is
what this commit does: it moves the BR2_USE_WCHAR logic outside of the
ncurses logic, and passes --enable-widechar/--disable-widechar as
appropriate.
However, there's a gotcha: util-linux really wants the ncursesw variant
of ncurses when the system has wchar support enabled. We take this into
account by:
- Enabling ncursesw when BR2_PACKAGE_NCURSES_WCHAR=y. In this case, we
have ncurses and we have BR2_USE_WCHAR=y, so everything is fine.
- Otherwise, enabling ncurses when BR2_PACKAGE_NCURSES=y but
BR2_USE_WCHAR is disabled.
To make sure that the existing util-linux programs that need ncurses
support still build fine, we adjust the Config.in to select
BR2_PACKAGE_NCURSES_WCHAR on BR2_USE_WCHAR=y configurations.
Fixes:
http://autobuild.buildroot.net/results/19de2a0b12380ddc86dbba0dae3a3877b25f83ff/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0002-arm-add-phys_to_virt.h-and-iomem.patch is now obsolete as
it's been properly fixed upstream now.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides skalibs, a collection of free software / open
source C development files used for building all softwares from
skarnet.org.
Note that, though skalibs (and all skarnet softwares) follows the
"./configure; make; make install" convention, it does not behave like a
traditional autotools project:
- static libraries are installed in $prefix/usr/lib/skalibs.
- pkg-config and libtool are not used: instead a custom system called
"sysdeps" is used and locations to libraries and headers are to be
passed explicitly via options of the './configure' script.
The host variant is provided to allow building the host variants of the
other skarnet softwares.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: remove post install target hook, do it directly in the target
installation commands.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
util-linux version 2.29 changed ncurses handling a lot. pkg-config
support to detect ncurses is removed from configure.ac and
ncurses-config is used to detect it. But it even didn't allow to
change config file for cross compilation. However, it is fixed in
upstream later and pkg-config support is added back.
This commit adds two patches from upstream that adds pkg-config support
and allows specifying ncurses-config file as well. However preference is
first given to pkg-config and later ncurses-config file. It also first checks
for version 6 and later 5.
Config option that changed are, ncursesw is enabled by default and ncurses
is disabled by default. So we need to explicilty specify with/without wide
char support now. This new version also allows disabling widechar support.
But it can't be enabled if ncurses without widechar support is enabled.
While building ncurses package, we explicitly enable pkg-config support,
so we don't need to specify ncurses-config file, but it is specified for
completeness.
Fixes:
http://autobuild.buildroot.net/results/4a2/4a25fb0d4546391d5dbbaa6cde17c45aeddb3549
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version bump as a dependency of Docker-Engine v1.12.5.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the libc-compat.h musl workaround patch to the copy of the kernel header.
Add a patch adding missing limits.h for musl.
Drop 0001-Avoid-in6_addr-redefinition.patch; not needed after the
libc-compat.h patch.
Drop upstream 0003-iproute2-tc_bpf.c-fix-building-with-musl-libc..patch.
Drop 0004-iproute-no-iptables.patch; should be fixed by upstream commit
4710e46ec3 (tc, ipt: don't enforce iproute2 dependency on iptables-devel).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's missing the dependency on lua, hence when using the upcoming PPS
support its staging directory isn't populated with the required
dependencies resulting in build failure.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit 9101ce5800 (runc: pass -extldflags '-static' on when
BR2_STATIC_LIBS=y) contained a small copy/paste error, FLANNEL_GLDFLAGS was
used instead of RUNC_GLDFLAGS.
[Peter: refer to exact commit]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-7067.
Note that since version 5.20.0 monit optionally depends on zlib.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"\r\n" sequences were not properly filtered when handling redirections.
This allowed an attacker to perform CRLF attacks such as HTTP header
injection:
https://github.com/bottlepy/bottle/issues/913
Python-bottle now uses setuptools instead of distutils.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added the pure-ftpwho config option. When selected, the --with-ftpwho
compiler option is passed which enabled the pure-ftpwho command.
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
* Fix a NULL pointer dereference (#776026)
* Fix a memory leak (#776020)
* Avoid a buffer overrun in the qtif loader ($#775648)
* Fix a crash in the bmp loader (#775242)
* Fix crash opening pnm images with large dimensions (#775232)
* Prevent buffer overflow in the pixdata loader (#775693)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These aren't supported upstream any more so remove the options and add
them to legacy.
Also switch the older deprecations that used 3.14.x to 3.12.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rsyslog package provides input and output plugins for journald which
are disabled by default. The following adds the option to include
`imjournal` and `omjournal` modules when building for a systemd target.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configuration flags `--enable-systemd` and `--disable-systemd` do
not exist in rsyslog (and may have never existed; most likely copy-paste
from other packages which have said options); removing the options.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3e3fef39e7 added new and improved
patch handling, with BR2_TARGET_UBOOT_PATCH. This was in addition to
the existing BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR option, that only
handled directories.
Later, commit 21b25d28fc moved the old
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR to legacy options. But on the way,
bad things happened:
* The original option was a string, while the one added to Config.in.legacy
is a bool. This results in a warning from defconfigs that actually define
the old BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR (because a string is not a valid
value for a bool), but it does not result in the legacy option being
selected. Consequently, BR2_LEGACY is not selected either.
* The advice at the top of Config.in.legacy to add a hidden WRAP option
to select BR2_LEGACY was not heeded.
* The advice at the top of Config.in.legacy to use the old string
option as the default for the new string option was not heeded. In
this case, the variable was not just renamed, as the old option
supported directories only, while the new one supports files too.
But since the old option is a subset of the new option, it can still
be used to set a useful default.
So, this mod turns the legacy option back to a string, adds a hidden
bool WRAP option to set BR2_LEGACY when the string is non emoty, and
uses the legacy option to set the default for the new option.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "command-line editing support was updated" does not indicate
the package name, unlike the other legacy options. This commit
adds "sqlite", to be nicer.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix out-of-bound access in create_url_list()
If there is an invalid URL in URLS->buf after a valid one, uri_parse is
called with out pointing after the allocated memory. As uri_parse writes
to *out before returning an error the loop in create_url_list must be
stopped early to prevent an out-of-bound access.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If there's no registered handler for a POST request, the default behaviour
is to write it to the filesystem. Several million deployed devices appear
to have this behaviour, making it possible to (at least) store arbitrary
data on them. Add a configure option that enables this behaviour, and change
the default to just drop POSTs that aren't directly handled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two new dependencies:
python-contstantly: runtime only
python-incremental: both runtime and build-time dependency
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-10009 - ssh-agent(1): Will now refuse to load PKCS#11 modules
from paths outside a trusted whitelist
CVE-2016-10010 - sshd(8): When privilege separation is disabled,
forwarded Unix-domain sockets would be created by sshd(8) with the
privileges of 'root'
CVE-2016-10011 - sshd(8): Avoid theoretical leak of host private key
material to privilege-separated child processes via realloc()
CVE-2016-10012 - sshd(8): The shared memory manager used by
pre-authentication compression support had a bounds checks that could be
elided by some optimising compilers
http://seclists.org/oss-sec/2016/q4/708
Drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09 release version.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This configuration provides a basic setup for using Buildroot
to create a sd-card image a BeagleBoard X15 board.
[Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11]
Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xfsprogs now builds fine with Buildroot default uClibc configuration, so
there is no point in having a specific comment: we don't have this for
any other package, and it's basically impossible to maintain.
UCLIBC_SV4_DEPRECATED is still disabled in the Buildroot default uClibc
configuration, but xfsprogs builds fine without it.
UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is now enabled in the Buildroot default
uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the new upstream site on kernel.org, and to a .tar.xz
tarball. The patches are simply refreshed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first patch was Git formatted, but additional information at the top
made it unapplicable by Git, fix this.
The second patch was not Git formatted at all.
Since upstream uses Git, it makes sense to have Git formatted patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow installation of the x11 egl support required for the X11 ddx
driver. The BR2_PACKAGE_ODROID_MALI_X11 hidden option will be selected
by the X11 DDX driver.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- select BR2_PACKAGE_LIBDRM,
BR2_PACKAGE_XLIB_{LIBX11,LIBXFIXES,LIBXEXT,LIBXDAMAGE} from
BR2_PACKAGE_ODROID_MALI_X11 in order to avoid numerous "if" in
Config.in
- Use a single assignment to ODROID_MALI_DEPENDENCIES to add the
dependencies for libdrm and the X11 libraries.
- Introduce ODROID_MALI_HEADERS_SUBDIR and ODROID_MALI_LIBS_SUBDIR to
clarify the location of the headers and libraries for the selected
architecture/display backend in the Mali tree.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When systemd is selected, xorg-server must have config-udev-kms
enabled in order to build correctly, but it won't be the case if
BR2_PACKAGE_XPROTO_DRI2PROTO is not part of the build.
Add BR2_PACKAGE_XPROTO_DRI2PROTO as a dependency of xorg-xserver
only when systemd is part of the build.
Fixes bug #9486.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version add the C++11 support and microdump.
Add the C++11 dependency since it's now mendatory.
Use the same linux-syscall-support version as the one defined by DEPS
file in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas: propagate the C++11 related dependency to
BR2_GOOGLE_BREAKPAD_ENABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google-breakpad moved to a new git repository last year and the old svn
repository has been deleted. So, the Buildroot archive mirror is used.
svn: E160013: Unable to connect to a repository at URL 'http://google-breakpad.googlecode.com/svn/trunk'
svn: E160013: '/svn/trunk' path not found
--2016-11-27 10:42:34-- http://sources.buildroot.net/google-breakpad-1373.tar.gz
Swith to the git repository using the git hash corresponding to the
1373 svn revision. But there is an issue with the third parties...
Some of them are not bundled with Google-breakpad or as git submodule.
Even worst, the google-breakpad source code use #include
"third_party/lss" directly, so we can't provide missing third parties
with an external package.
That's why the linux-syscall-support package was added to Buildroot,
it provide the missing linux_syscall_support.h file which is must be
copied to src/third_party/lss/ in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same way TARGET_CC was not being used during the build, TARGET_AR
was not used either. Now TARGET_CONFIGURE_OPTS is injected into
LVM2_MAKE_ENV which should include all the toolchain substitutions.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If not set the system will use an empty string which will result in
download errors for 'linux-.tar.gz' packages.
This patch makes it obvious to the user that the variable needs to be
set.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit turns mysql into a virtual package, after renaming the
original mysql package to oracle-mysql. This way, all existing packages
that "depends on" or "select" BR2_PACKAGE_MYSQL continue to work with no
modification.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd currently has selinux disabled unconditionally. This prevents
/sys/fs/selinux from being mounted automatically at boot which causes
audit to no longer function. This patch fixes the problem by checking if
libselinux is enabled and enabling support for selinux in systemd if so.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-aespipe fails on
$ cat /etc/debian_version
stretch/sid
at linking stage:
/usr/bin/gcc -L/home/buildroot/br6/output/host/lib -L/home/buildroot/br6/output/host/usr/lib -Wl,-rpath,/home/buildroot/br6/output/host/usr/lib -o aespipe aespipe.o aes-amd64.o md5-amd64.o md5-2x-amd64.o aes-intel64.o sha512.o rmd160.o
/usr/bin/ld: aes-amd64.o: relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
Fix is also used in Debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837393
[Peter: add comment explaining why]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The orangepi board variants use identical post-build and post-image scripts,
so move them up to board/orangepi and add symlinks in the variant
subdirectories, similary to how we handle it for the raspberry pi variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline u-boot 2016.09.01
- mainline kernel 4.9
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename orangepipc files, configs, and directories:
- oragepipc_defconfig -> orangepi_pc_defconfig
- board/orangepi/orangepipc -> board/orangepi/orangepi-pc
The purpose of the patch is to improve readability before
adding other boards of orangepi family.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that 7.12 has been added and 7.11 is the default version, let's
remove the old 7.9 release.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
7.12 is around, 7.11 has already seen a point release, so it's time to
make 7.11 the default version for gdb.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb 7.12 was released on October 2016, it's time to include it in
Buildroot, which this commit does.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The only security bug fixed concerns windows so it's not a security bump
for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when there is no syztem device table (permissions or static
devices) defined, then package permissions are not applied, because they
are guarded by the check on the system device tables being non empty.
Fix that by narrowing the guarding condition.
Note that the dependency on host-makedevs was not conditional; we always
build it even if we don't need it. Making it conditional is not
possible, because we don't know all the packages permissions by the time
the fs infra is parsed (packages from br2-external are parsed after it).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udoo neo files are currently placed inside udoo/neo directory.
Place the mx6qdl udoo related files inside udoo/mx6dl for consistency.
[Peter also update path in readme.txt]
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rev0 is very old (E.G. from before Linux was maintained in git), the kernel
prints a scary warning when used:
EXT4-fs warning (device sda): ext4_update_dynamic_rev:746: updating to rev 1
because of new feature flag, running e2fsck is recommended
And rev0 support is broken in u-boot 2016.11:
http://lists.denx.de/pipermail/u-boot/2016-December/275916.html
So default to rev1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As console=ttymxc0 is passed in U-Boot we can use /dev/console to
access the serial console and then BR2_TARGET_GENERIC_GETTY_PORT
can be removed.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnl3 include path was hardcoded in the configure script,
causing the following gcc warning:
WARNING: unsafe header/library path used in cross-compilation:
'/usr/include/libnl3'
Let's apply an upstream patch that addresses the issue: now
pkg-config is used to detect libnl include path.
Also:
- add optional libnl build dependency;
- enable libnl support only when libnl package is selected.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some patches are not necessary anymore as upstream fixed the issues.
As we are not patching configure.ac anymore, there is no need to
autoreconf the package.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mx6sx udoo neo boards. For more information about these
boards, please check:
http://www.udoo.org/udoo-neo
The U-Boot and kernel dts patches will be removed when we bump U-Boot
to 2017.01 and kernel to 4.10 version as they have already been sent
upstream.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to kernel 4.9 and remove the wifi dts patch as it is already
part of 4.9.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an integer buffer overflow in the jpeg loader (details still
embargoed).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch from a PHP Github pull request that fixes the build at -O0
on AArch64.
Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
[Thomas: improved patch commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the commit 64544178f1 many packages
broke because they could not find the ext2fs.pc file.
This is perfectly normal, as the DESTDIR and the install target were not
passed anymore to make.
[Peter: remove redundant E2FSPROGS_INSTALL_STAGING_OPTS]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the 1.5-b1 release notes:
Added ARM 64-bit (ARMv8) NEON SIMD implementations of the commonly-used
compression algorithms (including the slow integer forward DCT and h2v2 &
h2v1 downsampling algorithms, which are not accelerated in the 32-bit NEON
implementation.) This speeds up the compression of full-color JPEGs by about
75% on average on a Cavium ThunderX processor and by about 2-2.5x on average
on Cortex-A53 and Cortex-A57 cores.
Add it unconditionally for all aarch64 cores, as neon support is required
for all "standard" ARMv8 implementations. If an ARMv8 implementation w/o
NEON ever shows up, then we will need to add a BR2_AARCH64_CPU_HAS_NEON and
handle it like ARM.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the 1.5-b1 release notes:
Added full SIMD acceleration for PowerPC platforms using AltiVec VMX
(128-bit SIMD) instructions. Although the performance of libjpeg-turbo on
PowerPC was already good, due to the increased number of registers available
to the compiler vs. x86, it was still possible to speed up compression by
about 3-4x and decompression by about 2-2.5x (relative to libjpeg v6b)
through the use of AltiVec instructions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preperation for adding more architectures to the jpeg-turbo simd
handling, introduce a hidden BR2_PACKAGE_JPEG_SIMDS_SUPPORT symbol and use
that to enable simd support and default to jpeg-turbo, instead of open
coding it in both places.
While we are at it, reword the help text to be more useful.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The jpeg-turbo configure script now contains PKG_PROG_PKG_CONFIG, even
though it doesn't so far use pkg-config to detect any dependencies (it does
install a .pc file now though):
checking pkg-config is at least version 0.9.0... ./configure: line 13540: \
/home/peko/source/buildroot/output/host/usr/bin/pkg-config: No such file or directory
Depend on host-pkgconf for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building tar package with acl in static build configuration, we
get definition clash error for 'quote' function.
../gnu/libgnu.a(quotearg.o): In function 'quote':
quotearg.c:(.text+0x12fc): multiple definition of 'quote'
../sysroot/usr/lib/libacl.a(quote.o):/home/test/autobuild/run/instance-1/output/build/acl-2.2.52/libmisc/quote.c:27: first defined here
In acl upstream, this is already fixed by renaming quote and unquote
internal functions. This commit backports upstream patch.
Fixes:
http://autobuild.buildroot.net/results/d64/d64d13745c980d322d3b80c3b324d03eb7f17262
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Document LIBFOO_WAF_OPTS, LIBFOO_BUILD_OPTS, LIBFOO_INSTALL_STAGING_OPTS
and LIBFOO_INSTALL_TARGET_OPTS.
Also document LIBFOO_CONF_OPTS which was missing in waf-package
reference.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We correctly set LDCONFIG=true for MAKE_OPTS, but not for the other
steps which don't inherit it, and therefore e2fsprogs tries to use the
host ldconfig during staging and target installation, which causes some
weird error messages at build time (even if they don't abort the build).
Fix that by passing LDCONFIG=true at install time.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments pased to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
Now, we're left with a long list of unsafe paths, somehow hidden within
the code, which can use the same mechanism we use for arguments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments passed to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
It was made specific to the arguments (the structure member is named
'arg'), but can also be used to store the unsafe paths as well.
Also, that piece is almost un-documented.
Rename the structure member so that it is more generic, and add a bit of
comments to explain the whole of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For each build step, --notests needs to be passed to waf script
to avoid runing the unit tests.
This allow to remove the patch removing the unit tests from wscript.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script
for each build step. Add the possibility to do so by defining
<pkg>_WAF_OPTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script in
build step. Add the possibility to do so by defining <pkg>_BUILD_OPTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script
in install step. Add the possibility to do so by defining the
following variables:
<pkg>_INSTALL_STAGING_OPTS for the install to staging directory
<pkg>_INSTALL_TARGET_OPTS for the install to target directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- Move to a submenu "External AngularJS plugins", much like we have an
"External JQuery plugins" menu. Therefore, remove the "select
BR2_PACKAGE_ANGULARJS" from the package, since
angular-websocket/Config.in is now included only if
BR2_PACKAGE_ANGULARJS is defined.
- Add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix some static linking issues for Xtensa/Blackfin.
Optimize the size for non-threaded static binaries and
fix static C/C++ applications when running on the target.
Fix noMMU madvise declarations.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains the core policy utilities that are required
for basic operation of an SELinux system.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- Move the Config.in comment at the top of the Config.in file rather
than between the main option and its sub-options, as this breaks
menuconfig indentation.
- Fix the propagation of the libsemanage dependencies. libsemanage
depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS and
BR2_TOOLCHAIN_USES_GLIBC which were not accounted for. Since it
depends on BR2_TOOLCHAIN_USES_GLIBC, then all the gettext related
handling becomes useless and has been removed.
- Rename the prompt of the restorecond sub-option to just
"restorecond".
- Use TARGET_CONFIGURE_OPTS and HOST_CONFIGURE_OPTS instead of
passing LDFLAGS, CC, etc. manually.
- Use make "foreach" function for loops instead of shell "for" loops.
- Rework the explanation of why we're passing DESTDIR at build time.
- Minor formatting tweaks here and there.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
QEMU provides a single system emulator that supports both powerpc64
and powerpc64le with a target called 'ppc64-softmmu', but it provides
a different usermode emulator for each one (with targets
'ppc64le-linux-user' and 'ppc64-linux-user').
Due to this asymmetry it is not possible to support both cases with
the single arch value used in the package file. This patch introduces
an additional value into the package configuration,
HOST_QEMU_SYS_ARCH, so that both cases can be supported.
Fixes commit d2ff457e88
and autobuilder failture
http://autobuild.buildroot.net/results/a2d63e21c3e82c36f4a975e90ed56faba18e97a5
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas:
- Rewrap Config.in help text
- Use "depends on" rather than "select" for the audio backend options
- Slightly simplify some of the prompts for the audio backend selection
- Remove MIMIC_INSTALL_STAGING = NO, that's the default
- Use += when assigning MIMIC_DEPENDENCIES
- Remove double quotes when setting --with-audio=.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The symbol to control static compilation was renamed in 2015.02, but missed
when swupdate was added.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The EFL Wayland support was removed with commit [1] since the dependecy
on libdrm was missing. Also it requires OpenGL ES with EGL, Evas DRM
and Evas GLES DRM support [2].
As stated in configure, Evas GLES DRM engine support (gl_drm) depends
on wayland-client to build (wayland-client >= 1.8.0).
So, enable gl_drm only when wayland support is selected.
[1] 4f04be1659
[2] https://www.enlightenment.org/about-wayland
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pierre Floury <devpfl@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
drm can be used without compositor, just like it was with
the framebuffer for standalone applications
As stated in configure.ac, libdrm support needs libdrm, elput,
libxkbcommon and libgbm.
libgbm is only provided by mesa3d package when OpenGL EGL support is
enabled, so add a direct dependency on mesa3d.
Rework the libxkbcommon dependency since it's now required for
elput and libdrm support.
[1] https://www.enlightenment.org/about-wayland
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Pierre Floury <devpfl@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass on INSTALL_PROGRAM to configure since starting with version 8.26
when building natively it tries to use the self-built install to
install, and when cross-compiling it expects INSTALL_PROGRAM to point to
a real install, or otherwise fails when recursively trying to expand it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add new GPLv2 license option.
Unfortunately COPYING is GPLv3, so avoid it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since these are detected by the configure script, we should explicit
their dependencies in rpm.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds two patches to the rpm package to fix two separate but
related build issues:
- The first patch fixes a build that occurs when rpm is built after
elfutils, but without binutils. In this case, dwarf.h is present, so
rpm enables the build of a number of additional tools. But one of
them uses bfd.h, provided by binutils, without checking for its
existence. So the first patch fixes that by checking for bfd.h
existence before enabling the tool.
Fixes:
http://autobuild.buildroot.net/results/810/810e24cab65f67d143da29c78c0f89d37a851cd7/build-end.log
- The second patch fixes a build issue that occurs when rpm is built
after both dwarf and binutils. In this case, bfd.h complains because
config.h is not included. That's a weird and silly issue in bfd.h
that the binutils developers don't want to fix, and you have to
define PACKAGE or PACKAGE_VERSION before including bfd.h to use it
outside of binutils.
Fixes:
http://autobuild.buildroot.net/results/362/362502f89631c9ba1d71906527674657ccff01ed/build-end.log
Thanks a lot to James Knight <james.knight@rockwellcollins.com> for the
initial investigation about the first issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd-firstboot is never invoked since systemd's first boot detection
logic checks whether /etc/machine-id exists. Since the file is created
automatically by systemd.mk, systemd will never detect first boot and
therefore the systemd-firstboot.service unit file will never get run.
Additionally, if /etc/machine-id is removed to allow systemd-firstboot
to run, it interactively prompts for the system locale. This makes it
seem unlikely that an embedded system would want to use it.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A number of packages use BR2_ARM_CPU_HAS_NEON to know if the target handles
aarch32 neon instructions, which is only true for ARMv8 cores when they are
running in 32bit mode.
Notice: These cores do support neon-like instructions using a different
encoding in 64bit mode (it is a required part of ARMv8, similar to the FPU).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After commit 3ae07b4746 recently, efibootmgr now selects
BR2_PACKAGE_GETTEXT if the toolchain requires it.
gettext depends on wchar, so this dependency should be propagated as
well.
menuconfig currently complains loudly if you select efibootmgr, with an
error such as:
warning: (... && BR2_PACKAGE_EFIBOOTMGR ... && ) selects
BR2_PACKAGE_GETTEXT which has unmet direct dependencies
(BR2_USE_WCHAR)
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar only makes sense on platforms that support UEFI.
UEFI is only supported by some architectures at the moment, being mostly
employed on platforms such as x86, x86_64 and aarch64. Some other
platforms such as MIPS and PowerPC may have some unofficial UEFI
support. UEFI is also limited to little endian architectures.
efivar was being supported in Buildroot without architecture
restrictions so far, however this has led to the creation of a number of
hacks in the recipes, mostly for architectures that are not supported by
UEFI.
In order to avoid spending more time to debug these failures and
maintaining more hacks for unsupported architectures, efivar can be
restricted to that platforms where it makes sense and where it is more
likely to receive some testing and actual usage.
The existing hacks for the now unsupported architectures are removed,
and the dependency is propagated to efibootmgr as it depends on efivar.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc support was recently added to efivar through a small
compatibility patch.
This commit updates a comment in the efivar recipe to reflect this, as
we no longer have glibc as the only supported C library.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix kernel reproducible build if a non-C locale is used on the host
system.
When building the Linux kernel, scripts/gen_initramfs_list.sh does 'date
-d"$KBUILD_BUILD_TIMESTAMP" +%s'. In linux.mk, Buildroot sets
KBUILD_BUILD_TIMESTAMP to "$(shell date -d @$(SOURCE_DATE_EPOCH))".
For example, if LANG=fr_FR.UTF-8 is defined in the host system, it does
not work:
- LC_ALL=C date -d"$(LC_ALL=C date)" : ok
- LC_ALL=C date -d"$(LC_ALL=fr_FR.UTF-8 date)" : error
LANG/LC_ALL variables exported in the main Makefiles are not passed in
the $(shell ...) sub-shells.
Signed-off-by: Jean-Baptiste Trédez <jean-baptiste.tredez@basystemes.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A recent change in uClibc-ng removed the MADV_* definitions for
madvise(), but kept the madvise() function itself. This defeats the
logic used in madplay: it checks if madvise() is available, and if it
is, uses it and assumes the MADV_* definitions exist.
This inconsistency has been reported to upstream uClibc-ng, but in the
mean time, we can simply tell madplay to not use madvise(), which is
anyway useless on noMMU platforms.
Fixes:
http://autobuild.buildroot.net/results/3291554ea013e5f4a8f3447e10e664dffa8b131b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot references powerpc64 little endian as BR2_powerpc64le and not
BR2_powerpc64el.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: A53/A57 were in fact supported in aarch64 mode in 4.8 (in aarch32
mode only from 4.9), but it doesn't handle --with-abi, and as there is
unlikely to be any aarch64 based legacy projects unwilling to use a newer
GCC version it is simpler to disallow it for all modes.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit f71a621d91, we are using the
SED variable in the main Makefile. However, this variable is only
defined in package/Makefile.in, which gets included only when a
configuration is defined.
This means that, if you do:
$ make menuconfig savedefconfig
without a configuration defined, it fails with:
/bin/bash: /BR2_DEFCONFIG=/d: No such file or directory
Makefile:898: recipe for target 'savedefconfig' failed
make[1]: *** [savedefconfig] Error 127
This issue affects users of the "buildroot-submodule" project, which
does menuconfig+savedefconfig automatically. They worked around this
issue in commit
d12676b608,
but really "make menuconfig savedefconfig" should work out of the box.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has dropped SDL support for ffplay in favor of SDL2.
This results in silently not building ffplay even if it is selected
in Buildroot config.
[Peter: propagate !static dependency from sdl2]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package currently installs the "rpiboot" utility, which is
needed to access via USB mass storage the built-in eMMC of Raspberry Pi
compute modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tom privately notified that he is not able to support the packages he
originally added in Buildroot, so this commit removes him from the
DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linaro toolchains are currently only available on ARMv7-A, but can
in fact also be used to generate 32 bits code for ARMv8 platforms. This
commit therefore adjusts their architecture dependency.
Example, a 32 bits ARM build produces a 32 bits busybox binary:
$ file output/target/bin/busybox
output/target/bin/busybox: setuid ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=16a7a70eb9cac08759e52a260478b9c287f59238, stripped
Which was built for Cortex-A72:
$ ./output/host/usr/bin/arm-linux-gnueabihf-readelf -A output/target/bin/busybox
Attribute Section: aeabi
File Attributes
Tag_CPU_name: "Cortex-A72"
Tag_CPU_arch: v8
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_FP_arch: FP for ARMv8
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_align_preserved: 8-byte, except leaf SP
Tag_ABI_enum_size: int
Tag_ABI_VFP_args: VFP registers
Tag_CPU_unaligned_access: v6
Tag_MPextension_use: Allowed
Tag_Virtualization_use: TrustZone and Virtualization Extensions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the Cortex-A53 CPU to the target architecture variant choice. This
sets the toolchain to use Cortex-A53 as the target. The effect is that
various Cortex-A53 tunings are enabled for the compilation of packages.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's currently only one widely supported ABI for ARM64, called lp64,
so we define BR2_GCC_TARGET_ABI to the appropriate value.
Note that there is another ABI for ARM64 being worked on, ilp32, but its
support is not fully upstream in the kernel, so we're not adding support
for it for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARMv8 cores have a mandatory FPU unit called FP-ARMv8, so we:
- add a new hidden Config.in option for the availability of this
unit (BR2_ARM_CPU_HAS_FP_ARMV8)
- allow the selection of a possible choice in the "Floating point
strategy", and add two new choices: BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8.
- specify the -mfpu values for BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8 cases, when used on ARM 32 bits (-mfpu
doesn't exist on ARM64, instead -mcpu modifiers are used, so they
will be added on a per-core basis).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: drop the FP strategy dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The floating point strategy currently depends on EABI || EABIHF. The
reason was that, wayback when we also supported OABI, we only exposed FP
for EABI or EABIHF, and hide it for OABI, which did not support FP.
It's been a while now that we do not support OABI, but the dependency
stuck all along.
Remove it as it is no longer needed, and is always true.
However, the choice is empty for AArch64, as we still have no entry for
their floating point strategy yet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now the "Target Architecture Variant" choice was not visible on
AArch64. In order to prepare the addition of the 64 bits core to this
choice, this commit adds a "depends on !BR2_ARCH_IS_64" dependency to
all currently supported cores (that are 32 bits only).
Following this commit, the "Target Architecture Variant" choice appears
on AArch64, but is for now empty.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 64 bits ARM processors are capable of running 32 bits ARM code, and
some platforms are indeed using this capability. Due to this, if we were
to keep the separation between Config.in.aarch64 and Config.in.arm, we
would have to duplicate the definition of all 64-bits capable ARM cores
into both files.
Instead of going down this route, let's take the same route as the x86
one: a single Config.in.x86 file, used for both x86 32 bits and x86 64
bits, with the appropriate logic to only show the relevant cores
depending on which architecture is selected.
In order to do this, we:
- Make the "ARM instruction set" choice only visible on ARM 32 bits,
since we currently don't support ARM vs. Thumb on AArch64.
- Add the relevant values for the BR2_ARCH option.
- Add the relevant values for the BR2_ENDIAN option.
- Make the "aapcs-linux" BR2_GCC_TARGET_ABI value only used on ARM 32
bits, since this ABI doesn't mean anything on AArch64.
- Make the BR2_GCC_TARGET_FPU option depends on ARM 32 bits, since
there is no -mfpu option on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current VIM_REMOVE_DOCS hook removes all .txt files from
/usr/share/vim. Unfortunately, this also removes the rgb.txt file,
which is needed at runtime for vim, as reported in bug #9466.
This commit changes VIM_REMOVE_DOCS to remove only
/usr/share/vim/vim*/doc/. Size-wise, it's equivalent because:
- We are no longer removing a few README.txt in other directories,
taking more space.
- We are now removing the /usr/share/vim/vim*/doc/ folder entirely,
which contained a few files not named *.txt
So overall, the size of /usr/share/vim/ before and after this patch is
still 11MB.
Fixes bug #9466.
Reported-by: Mateusz Furdyna <sir.ferdek@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many (100+) packages supported by buildroot contain old configure
scripts (or build them from old versions of autotools) that are unable
to determine how to link shared libraries on powerpc64 and
powerpc64le. This causes that test to erroneously fail on toolchains
that are not "bi-endian" (which is the case for toolchains built by
buildroot), which causes configure to build static libraries instead
of dynamic ones. Although these builds succeed, they tend to cause
linker failures in binaries later linked against them.
Because affected configure files can be discovered automatically, this
patch introduces a hook (enabled only when building for powerpc64 and
powerpc64le) that uses a script to scan and fix each package.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dev->trans_start was replaced by netif_trans_update helper in kernel
4.7 by commit 860e9538a9482bb84589f7d0718a7e6d0a944d58.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Rebase existing patches
- Use a "menu" instead of "choice" to select Ethernet Powerlink
Drivers since we can now build several kernel modules at once.
- Select the Intel 82573 driver by default.
- Disable library with simulation interface.
- Disable zynq/FPGA (PCIe) interface otherwise the kernelpcp library
is always build.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: minor Config.in tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same thing was done in upstream commit 220d7a2f "QtGui module only
needed by Windows", though it was done differently upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the logic that allows to enable the naxsi external
module below the "external modules" comment, which was already used for
the upload and dav-ext modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nginx built-in support for webdav is missing support for two commands:
PROPFIND and OPTIONS. This commit adds a new package that provides an
external nginx module with improved webdav support.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas:
- Remove the BR2_PACKAGE_NGINX_HTTP_DAV_EXT_MODULE sub-option of the
nginx package. The BR2_PACKAGE_NGINX_DAV_EXT option is sufficient.
- Move the nginx.mk code together with another external module being
enabled, nginx-upload.
- Add LICENSE and LICENSE_FILES variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TI provides a set of headers files and libraries useful in developing
firmware for real-time (PRU) cores embedded in some processors e.g.
AM3358. This package stages these files for any packages creating
PRU firmware.
Note: As per [1], use commit v4.0.2 to sync with common TI Linux
versions.
[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/p/552190/2018113#2018113
Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
[Thomas:
- rename BR2_PACKAGE_PRU_EXAMPLES to BR2_PACKAGE_PRU_SOFTWARE_SUPPORT,
since the package directory name should match the Config.in option
for this package
- use select for BR2_PACKAGE_HOST_TI_CGT_PRU, and therefore add the
appropriate "depends on BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Aubio libav support require libavcodec, libavformat, libavutil and
libavresample. Enable libav support only when
BR2_PACKAGE_FFMPEG_AVRESAMPLE is set.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a major update in cjson:
- project site moved from sourceforge to github
- project recommends to use the new cmake buildsystem instead of the
legacy make
- BR2_STATIC_LIBS is now OK (README does not mention issue anymore)
- As include path and library name have changed, tinycbor has to be
updated
- As cjson can now be built as a static library, fix a bug in
json2cbor compilation from tinycbor package
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we require a host with an UTF-8 locale as soone as we build a
Buildroot toolchain with support for locales. This means that we do
erquire such a locale when building a toolchain with either uClibc,
glibc or musl.
However, glibc and musl do not require such a locale to be present.
Use the new option to check if an UTF8 locale is needed on the host,
rather than deriving that from toolchain settings.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be selected when we need the host to have an UTF-8 locale
(e.g. to build uClibc with support for locales).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The test suite is removed from the package and is already a separate
package in buildroot. All patches are upstream, so remove them.
The UCLIBC_HAS_LFS option is removed upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: remove BR2_UCLIBC_INSTALL_TEST_SUITE option, add it to
Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Efl libraries bundle a copy of liblz4 which is also provided by
lz4 Buildroot package. Switch to liblz4 from lz4 package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 5b0dac7ef5, when bumping to
lttng-babeltrace, one patch was kept while it had been applied in the
upstream babeltrace project, causing a build failure.
The patch 0003-fix-uuid-support-detection-on-static-build.patch has been
applied upstream as 2741f55be80ae8af169ae795ea28d2a39c18fa60 in the
master branch, and as d94e7873e9080e820e7742e468736b1317a88de1 in the
maintenance branch that was used to tag 1.5.0.
Fixes:
http://autobuild.buildroot.net/results/585f960eb81b0e15858aadc4aca516af23012b61/
(and about a hundred of similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we bumped CMake from 3.5.2 to 3.6.3 in commit
99ed85d740, CMake uses pkg-config during
its configure step to find available libraries on the host.
If host-pkgconf was not built before host-cmake, everything was working
fine. However, if host-pkgconf was built before, the configure step of
host-cmake was finding pkg-config and used it to find
libraries. Unfortunately, since we were not passing
PKG_CONFIG_PATH/PKG_CONFIG_SYSROOT_DIR, pkg-config was behaving in its
"default" mode, i.e returning results valid when building things for the
target, not for the host. This lead to header paths pointing to the
staging directory being used when building native binary objects,
causing all sort of build failures.
This commit fixes that by passing $(HOST_CONFIGURE_OPTS) to the
environment of host-cmake configure step. This variable contains
HOST_MAKE_ENV, which itself contains the appropriate
PKG_CONFIG_PATH/PKG_CONFIG_SYSROOT_DIR definitions.
At the same time, we drop LDFLAGS="$(HOST_LDFLAGS)" because this
definition is already in $(HOST_CONFIGURE_OPTS).
Fixes:
http://autobuild.buildroot.net/results/4e703ed8c2eb0f914794038b0ef7bd73a67f38ce/
(and 424 similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new waf-package infrastructure simplifies writing waf-based
packages. It can be used by our six current such packages, plus a
later-incoming one by Romain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rename <pkg>_BUNDLED_WAF to <pkg>_NEEDS_EXTERNAL_WAF, which
involves inverting the meaning of the boolean.
- always add the host-python dependency
- add a default value for <pkg>_NEEDS_EXTERNAL_WAF (defaults to NO)
- remove the unneeded <pkg>_MAKE related definitions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-waf will be used by waf-based packages that do not include it in
their release tarballs, like mpv.
mpv is currently the only case we have, but with the upcoming
waf-package infra, having host-waf available just makes the infra
complete from the onset.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: drop dependency on host-python, it's really a runtime dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change "foo" references to "libfoo" in section that defines variables
explicitly stated to relate to a "libfoo" package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-rc2.
This change contains a set of minor fixes and updates.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_STRIP is set to none, a dummy 'true' app is used instead of
strip utility. However, kexec package always requires a real strip
executable as it is used to generate intermediate files during the build
process.
If 'true' is used the build system runs the following command:
true --strip-debug -o purgatory/purgatory.ro purgatory/purgatory.ro.sym
which obviously doesn't do anything useful and the build later fails
with:
bin/bin-to-hex purgatory < purgatory/purgatory.ro > kexec/purgatory.c
/bin/sh: purgatory/purgatory.ro: No such file or directory
kexec/Makefile:7: recipe for target 'kexec/purgatory.c' failed
make[2]: *** [kexec/purgatory.c] Error 1
To resolve it always specify STRIP=$(CROSS_COMPILE)strip, regardless of
buildroot configuration.
[Peter: add a comment explaining why this is done]
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a sha256 hash since upstream only provides one weak hash.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
My local 'next' branch was not uptodate, so the previous merge was missing
the most recent changes.
Thanks to François Perrad for noticing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 0.12.3 bump forgot to update the download hash and remove the now
upstreamed patch, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 71d9b0c1f0.
Now that -mauto-litpools is in TARGET_ABI when building for xtensa, -O0
builds succeed, so this workaround is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 173135df5b ("core: re-enter make if
$(CURDIR) or $(O) are not canonical paths") introduced the CANONICAL_O
variable, defined as:
CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
This duplicates the definition of BASE_DIR, by different means:
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
So one of these shell calls is redundant. CANONICAL_O is defined first,
so this commit replaces the BASE_DIR derivation with $(CANONICAL_O).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to QEMU to include the "tools" (configure option:
--enable-tools) in the target. This adds a dependency on pixman, but
that's already present.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain has many problems which are fixed in contemporary gcc
and uClibc-ng. In addition, several hacks are needed to be able to
work with this toolchain. All these hacks are removed as well. Also
the package exceptions for this toolchain are removed.
The BR2_BFIN_INSTALL_FDPIC_SHARED and BR2_BFIN_INSTALL_FLAT_SHARED
options don't get a legacy entry. For the ADI toolchain, there already
is a legacy entry, so it doesn't make sense to add it twice. For other
external toolchains, these options didn't actually work, because they
rely on the specific layout of the ADI toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently support gcc as old as 4.3. However, Buildroot works
perfectly well with even older gcc versions (tested with 4.1). So we
can add an option BR2_TOOLCHAIN_EXTERNAL_GCC_OLD to support that. The
help text of this option is written with plenty of discouragement.
We use _OLD and not something like _PRE_4_3, because at some point we
will likely remove the 4.3 option and what would then require a name
change.
We don't set any _AT_LEAST option in this case because it's no use -
there is no lower bound on the version in this case. We therefore leave
BR2_TOOLCHAIN_GCC_AT_LEAST empty (the implicit default). When it is
empty, we don't do a version check at all in check_gcc_version
(previously we errored out when it was empty).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MoarVM's Configure.pl script uses pkgconfig to find libraries and
headers, but it uses the one installed in the host machine which is
wrong and can lead to errors of unsafe include paths.
Instead, make it depend on the host-pkgconf package and specify the path
to our pkgconfig binary by using the --pkgconfig configure option.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream kexec-lite now has support for kexec on POWER9 based machines.
Update so this works in simulators and is ready for when real machines
are available.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this commit will init the display as early as possible so the user can
see on screen the boot process.
the displey init will be called after the logging init to provide some
logging of the init.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make may throw an error (but ignored) trace when cleaning up the
rootfs.
The target-finalize rule intends to remove the folder
`$(TARGET_DIR)/usr/share' but this directory may still contain items
(such as the `udhcpc' helper script) and causes the rmdir to fail.
The stderr output is redirected to /dev/null but it returns and error
which is escaped by the leading `-'; but make reports an ignored-error.
See the log below:
$ make
(...)
rm -rf (...)/target/usr/share/gtk-doc
rmdir (...)/target/usr/share
rmdir: failed to remove '(...)/target/usr/share': Directory not empty
make[1]: [Makefile:650: target-finalize] Error 1 (ignored)
find /(...)/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 (...)/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
This patch apply the same rule at the instruction immediately after:
* redirecting stderr to /dev/null (already done) and
* executing true if the `rmdir' instruction fails.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems with the change to gcc 6.x based toolchain this
workaround is no longer required. Tested with an arc hs toolchain.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The makedevs package is a fork of the makedevs tool from busybox. It is
part of the Buildroot infrastructure, not something that should be used
on the target. It something like this is needed on the target, upstream
busybox should be used. And if one of the Buildroot-specific features
is needed, then that feature should be upstreamed to busybox.
Besides, there were already two things wrong with the target package:
- it didn't take into account the overlap with busybox (no depends on
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS, no dependency on busybox);
- it didn't take into account the libcap feature.
The target package was introduced more or less accidentally in 81cd9d45
where the intention was to make it more similar to other packages.
So, kill it with fire.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a space before and after the equal sign when defining the TZ, LANG
and LC_ALL variables, as suggested by the Buildroot coding style.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure all files in $TARGET_DIR have a defined modification time
before to generate filesystems.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux kernel include a few information about build environment in its binary.
This feature is incompatible with BR2_REPRODUCIBLE. This patch overload build
information when BR2_REPRODUCIBLE is enabled.
Note that usage of KBUILD_BUILD_TIMESTAMP is not mandatory since Buildroot
use `fakedate'. However, native solution is prefered when upstream
provide one.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to make tar images reproducible, force files order in tarball.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default invocation to gzip include timestamp in output file. This feature is
incompatible with BR2_REPRODUCIBLE. It is possible to disable it with '-n'.
The environment variable GZIP can hold a set of default options for gzip. So
instead to find all gzip invocation in build process, we just export 'GZIP=-n'.
Notice bzip2, lzma and xz are not impacted by this problem. On the other hand, lzop
does include timestamp and does not provide any way to disable it.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When reproducibility is requested, generate a global SOURCE_DATE_EPOCH
environment variable which contains either the date of Buildroot last
commit if running from a git repository, or the latest release date.
This means that all packages embedding build dates will appear to
have the same build date, so in case of new commit or release, all
packages will appear to have been changed, even though some of them
may not have changed in fact.
The meaning of SOURCE_DATE_EPOCH is specified by the following
specification:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago toolchains are no longer maintained and haven't been updated
for a long time.
With this removal, all the legacy toolchain-external support can be
removed as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Synopsys external toolchain for
the ARC architecture.
The legacy implementation is removed.
Note that this toolchain is marked as BROKEN, but 2016.09 seems about
to be released so maybe it will be unbroken soon.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AMD-64 architecture.
The legacy implementation is removed.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external-package infrastructure is just a copy of the
toolchain-external commands, replacing TOOLCHAIN_EXTERNAL by $(2)
and adding double-dollars everywhere.
toolchain-external itself is converted to a virtual package, but it
is faked a little to make sue the toolchains that haven't been
converted to toolchain-external-package yet keep on working.
The TOOLCHAIN_EXTERNAL_MOVE commands don't have to be redefined
for every toolchain-external-package instance, so that is moved
out into the common part of pkg-toolchain-external.mk.
The musl-compat-headers dependency stays in the toolchain-external
package itself.
The musl ld link is duplicated in the legacy toolchain-external and
the toolchain-external-package, because they have separate hooks.
The handling of TOOLCHAIN_EXTERNAL_BIN deserves some special attention,
because its value will be different for different
toolchain-external-package instances. However, the value only depends
on variables that are set by Kconfig (BR2_TOOLCHAIN_EXTERNAL_PREFIX
and BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD) so it can easily be used in
the generic part. So we don't have to do anything specific for this
variable after all.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-toolchain-external.mk will be used later to define the
toolchain-external-package infra. Most of the variable and macro
definitions are shared with the legacy generic-package based
toolchain-external. Move these to pkg-toolchain-external.mk.
pkg-toolchain-external.mk is included implicitly by the include
toolchain/*/*.mk in the top-level Makefile. The order of inclusion is
not defined, but that doesn't matter because none of the variables
defined in pkg-toolchain-external.mk are used in conditions or in
rules in toolchain-external.mk, only in recursively-expanded
variables.
No functional changes at all. The output of 'make -qp' hasn't changed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the toolchain-external logic will be split into separate packages,
the order in which things are defined in toolchain-external.mk no
makes less sense. So reorder things in a more logical fashion.
Also add a few more comments to the different sections.
No functional changes at all. The output of 'make -qp' hasn't changed,
except for the order of arguments in
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch, slightly change some comments,
reordered some parts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The next release of uClibc-ng (1.0.20) will remove the test suite.
Add a separate package before the next release.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* The first patch is removed because the input-raw plugin is now enabled
in tslib's provided ts.conf
* The second patch added 2 programs to tslib. The whole patch is removed
because:
- ts_finddev is now part of tslib.
- inputattach is part of the 'Linux console project' located
here: https://sourceforge.net/projects/linuxconsole/
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit a167081c5d.
With the applied musl/kernel headers conflict workaround this upstream nacked
patch is no longer necessary.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rick Felker suggested[1] this hack as a workaround to musl libc conflict with
kernel headers:
The problem is linux/libc-compat.h, which should fix this, only works
on glibc, by design. See:
#ifndef _LIBC_COMPAT_H
#define _LIBC_COMPAT_H
/* We have included glibc headers... */
#if defined(__GLIBC__)
/* Coordinate with glibc netinet/in.h header. */
#if defined(_NETINET_IN_H)
If you patch it like this:
-#if defined(__GLIBC__)
+#if 1
then it should mostly work but it's still all a big hack. I think
that's what distros are doing. The problem is that the same header is
trying to do two different things:
1. Provide extra linux-kernel-API stuff that's not in the
libc/userspace headers.
2. Provide definitions of the standard types and constants for uClibc
and klibc, which don't have complete libc headers and rely on the
kernel headers for definitions.
These two uses really should be separated out into separate headers so
that the latter only get included explicitly by uClibc and klibc and
otherwise remain completely unused. But that would require coordinated
changes/upgrades which are unlikely to happen. :(
Upstream musl still evaluates[2][3] a permanent solution.
With this in place we can revert (at least) commits a167081c5d (bridge-utils:
fix build with musl) and e74d4fc493 (norm: add patch to fix musl build).
[1] http://www.openwall.com/lists/musl/2015/10/08/2
[2] http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258
[3] http://www.openwall.com/lists/musl/2016/11/09/2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previous version patches are still needed, but they have been
upgraded to apply cleanly.
This also reverts aa9fde1c45, as that
patch is already on upstream.
Signed-off-by: Alvaro Gamez <alvaro.gamez@hazent.com>
[Thomas: fix the AR/RANLIB problem by adding another patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently some buildroot targets fails (list-defconfigs,
graph-build, etc), if there is an issue with configuration.
For example, enabling uboot package without providing custom
version name results in failing of various targets.
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: as suggested by Arnout, added printvars and savedefconfig to
nobuild_targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
netsniff-ng allows build with musl since version 0.5.8. With libnet
now being able to build with musl, let's enable musl for netsniff-ng
as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: update Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to a patch taken from upstream
(ffd7fab744),
we can enable the libnet package on musl toolchain.
Adjusted the file paths manually so the patch applies to the packaged
libnet sources.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: allow the package to be selected with the musl C library.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to the common genimage scripts, the uImage.imx23-olinuxino
file no longer exists.
Instead of updating the section, let's simply remove it as the more
standard method of using sdcard.img is already explained.
This also makes the readme more consistent with the other i.MX readme files.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to the common genimage scripts the generated file list
is a bit different, so adjust it accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Saves a little space and network bandwidth.
While at it, use PATCHELF_VERSION for PATCHELF_SITE.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The snowball_defconfig has been removed one year ago in commit
b3fa8e24de ("configs: remove
calao_snowball_defconfig"), and it's no longer possible to buy
Snowball boards. Therefore, there is no reason to keep the
snowball-related packages in our tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TOOLCHAIN_EXTERNAL_PREFIX variable is already qstripped and
stored in the TOOLCHAIN_EXTERNAL_PREFIX variable in
toolchain-external.mk, so use this variable everywhere.
This will be useful for a later patch that makes the derivation of
TOOLCHAIN_EXTERNAL_PREFIX a little more complex.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
allow usage of amcodec if kodi is built and libamcodec is selected
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas: fix KODI_INCLUDES definition in RPi case, fix indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A short list of new features:
- progress interface as general way to signalize the update
status outside of the process.
- support encrypted artifacts (encryption via simmetric keys)
- host verification for swu images (-c option)
- configuration file to configure the update process
- HAwkbit backend: API extended, support for configData messages
- Hawkbit backend: supports SSL certificates
- remote handler : general interface to connect external
installers.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for 256 colors is enabled in xterm and ncurses, but it was
forgotten for screen.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to have a better hierarchy for the genimage scripts used by
NXP mx25, mx51, mx53, mx6, mx7 SoCs, let's place them inside the
board/freescale/common/imx/ directory.
This helps in creating a more natural separation between the mxs scripts
that are placed inside the board/freescale/common/mxs/ directory.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Source /etc/default/telnet to make it possible to override the telnetd
arguments. For example a user may want to set an alternative port.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a webrtc GStreamer plugin that will
have to select the webrtc-audio-processing package (and therefore
inherits its dependencies), this commits adds a
BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING_ARCH_SUPPORTS blind option to avoid
duplicating the architecture dependencies of this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's new for 1.10.0, add an explicit option for the fdkaac plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add missing dependencies for the fdk-aac select, as noticed
by Baruch Siach.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a fdk-aac GStreamer plugin that will
have to select the fdk-aac package (and therefore inherits its
dependencies), this commits adds a BR2_PACKAGE_FDK_AAC_ARCH_SUPPORTS
blind option to avoid duplicating the architecture dependencies of
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's a new feature for 1.10.0+, however it doesn't have an
enable/disable configure switch so just handle the dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a standard genimage script for the MXS processors (MX23 and MX28).
Based on the common scripts for the other imx devices:
board/freescale/common/genimage.cfg.template
board/freescale/common/post-image.sh
This makes it easier to add new MX23/MX28 boards configurations into
Buildroot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.
This speeds up the start of the build on my machine from 5.6s to
4.9s.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ustream-ssl has support for polarssl and cyassl
but since polarssl is made obsolete by mbedtls and cyassl
is not present in buildroot, we have not added support for it.
Signed-off-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0002 patch tweaked. There is a hunk that has been removed upstream by
this commit:
082210c7a8
- Patches 0004, 0005 and 0006 were backported from upstream and now they
are included in this release, so drop them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc-6 correctly warns about a out of bounds access
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
check the end of array instead of beginning of next element to fix this
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
