They were added back in 5432f26f0 (Adding Central config.cache options),
supposedly to be able to cache the result of configure tests, but they
were never, ever referenced anywhere in our code... Besides, we dropped
the idea of getting a configure cache long ago now (it does not work)...
They are causing spurious error messages on some distros (e.g. Fedora)
which use GNU's which (whatever package that comes from), while it is
silent on other distros (e.g. Ubuntu) which use debianutils' which.
Drop them.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch to python-pyqt5 to make it build properly
against Qt 5.11.
PyQt5 is using a dual-licensing model, and the commercial company
behind it (RiverBank) only provides release tarballs, and no public
Git repository, so we cannot see the individual changes they make. By
diffing the PyQt5 5.10 and 5.11 releases, we could see that they opted
for dropping entirely support for the waitForEvents() method, rather
than keeping it for Qt < 5.11. We take the same approach in the below
patch, since this is anyway what will happen when we will bump to
PyQt5 5.11.
The patch is not Git-formatted, because there is no upstream Git
repository for this project.
Fixes:
http://autobuild.buildroot.net/results/1f1e92374fe71a1d4343243db5f530c33db06698/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some users of kconfig need some packages to be built before their
kconfig infra be used.
For example, the linux kernel, starting with 4.16, needs flex and bison
to generate the parser code. Furthermore, starting with 4.18, it will
also need the cross-compiler before parsing the kconfig stuff, because
that calls the compiler to check its features.
Currently, this is broken, even the flex/bison ones, even though they
are listed, because there is no way to define dependencie that are
guaranteed before the (visual) configurators. For example:
$ make distclean
$ make menuconfig
--> enable the linux kernel, choose a defconfig, save, exit
$ make linux-menuconfig
[...]
HOSTCC scripts/basic/fixdep
HOSTCC scripts/kconfig/conf.o
YACC scripts/kconfig/zconf.tab.c
/bin/sh: bison: command not found
LEX scripts/kconfig/zconf.lex.c
scripts/Makefile.lib:196: recipe for target 'scripts/kconfig/zconf.tab.c' failed
make[3]: *** [scripts/kconfig/zconf.tab.c] Error 127
make[3]: *** Waiting for unfinished jobs....
/bin/sh: flex: command not found
scripts/Makefile.lib:188: recipe for target 'scripts/kconfig/zconf.lex.c' failed
make[3]: *** [scripts/kconfig/zconf.lex.c] Error 127
Makefile:528: recipe for target 'rpc_defconfig' failed
make[2]: *** [rpc_defconfig] Error 2
linux/linux.mk:511: recipe for target '/home/ymorin/dev/buildroot/buildroot/output/build/linux-4.17.11/.config' failed
make[1]: *** [/home/ymorin/dev/buildroot/buildroot/output/build/linux-4.17.11/.config] Error 2
Makefile:79: recipe for target '_all' failed
make: *** [_all] Error 2
So, we introduce a new type of dependencies for kconfig-based packages,
that are guaranteed to be built and installed before the (visual)
configurators are called.
Since those dependencies are phony targets and therefore always out of
date, a normal dependency would cause the .config target to be rebuilt
on each invocation of make. So we use an order-only pre-requisite, like
is done for the patch dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The commit that added the dependency on host-{bison,flex} did
so because the pre-generated kconfig parser source files were
removed from the kernel tree, in linux-4.16.
But then, in linux-4.17, the pre-generated dtc parser source
files were in turn removed as well.
So, document the two reasons why they are needed, so we don't
accidentally remove them when we (soon) introduce the kconfig
dependencies.
(Also fix the first assignment to LINUX_DEPENDENCIES to be a
simple assignement, not an append-assignment.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6288409642 ("libselinux: add
patch to fix build with gcc < 4.7") introduced a patch, but its file
name was incorrect, so it was never applied. In addition, the patch
was generated against the Git repository of SELinux, which includes
all projects, and therefore it doesn't apply to the libselinux source
code extracted from the tarball: the "libselinux/" component path
needs to be removed from the patch.
This commit fixes both problems, which should finally and really fix:
http://autobuild.buildroot.net/results/c3272566bb808e43bb77ec59cfe596f7e0fe9a64/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add BR2_TOOLCHAIN_SUPPORTS_ALWAYS_LOCKFREE_ATOMIC_INTS variable and
use it in BR2_TOOLCHAIN_HAS_GCC_BUG_64735.
This new variable will be used to select boost atomic when lock-free
atomic ints are not available
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
eigen generates a pkg-config file which has a broken prefix
(@CMAKE_INSTALL_PREFIX@). This broken prefix causes an incorrect path when
other packages call pkg-config --cflags eigen.
This patch fixes the prefix in the generated eigen pc file, so projects
which depend on this pc file can now correctly find the eigen include
directory at build time.
Also correct the Cflags output to use the runtime prefix instead of the
build time STAGING_DIR, like we do elsewhere.
[Peter: drop backslashes, tweak commit message]
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the latest release of the 1.11.x LTS series as 1.10.x is no longer
supported upstream:
https://www.djangoproject.com/download/
Fixes the following security issues:
- CVE-2017-12794: Possible XSS in traceback section of technical 500 debug
page (1.11.5)
- CVE-2018-6188: Information leakage in AuthenticationForm (1.11.10)
- CVE-2018-7536: Denial-of-service possibility in urlize and urlizetrunc
template filters (1.11.11)
- CVE-2018-7537: Denial-of-service possibility in truncatechars_html and
truncatewords_html template filters (1.11.11)
- CVE-2018-14574: Open redirect possibility in CommonMiddleware (1.11.15)
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc-2.28 did quite some lifting in their headers, which breaks the
way some packages were detecting glibc, like gnulib.
However, packages do bundle gnulib (it was meant to be bundled),
and so does m4.
Since m4 hasn't seen the slightest commit since 2017-01-09, it is
bundling an old gnulib version, that predates glibc-2.28, and thus
breaks. It also means that upstream hasn't already fixed the issue.
Furthermore, as upstream is using a git submodule for gnulib, and
that the paths are not the same in the release tarball (in lib/)
and in the git tree (in gnulib/), we can't do a plain backport.
So, we selectively backport the two patches from gnulib upstream,
restricted to only the files that happen to be used in m4.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reported-by: c32 on IRC
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The threads dependency comment is currently shown even though the
toolchain supports threads, only because kernel build is disabled.
Merge the kernel and threads comments. This is similar to what we have
in other packages that need the kernel.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-10906 - In fuse before versions 2.9.8 and 3.x before 3.2.5,
fusermount is vulnerable to a restriction bypass when SELinux is active.
This allows non-root users to mount a FUSE file system with the
'allow_other' mount option regardless of whether 'user_allow_other' is set
in the fuse configuration. An attacker may use this flaw to mount a FUSE
file system, accessible by other users, and trick them into accessing files
on that file system, possibly causing Denial of Service or other unspecified
effects.
And additionally:
- libfuse no longer segfaults when fuse_interrupted() is called outside the
event loop.
- The fusermount binary has been hardened in several ways to reduce
potential attack surface. Most importantly, mountpoints and mount options
must now match a hard-coded whitelist. It is expected that this whitelist
covers all regular use-cases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
u-boot 2018.01 now fails to build with the following error:
CC arch/arm/lib/asm-offsets.s
In file included from /builds/buildroot.org/buildroot/output/host/include/libfdt.h:54:0,
from /builds/buildroot.org/buildroot/output/build/uboot-2018.01/scripts/dtc/libfdt/fdt.c:54:
/builds/buildroot.org/buildroot/output/host/include/libfdt_env.h:82:24: error: redefinition of 'fdt16_to_cpu'
static inline uint16_t fdt16_to_cpu(fdt16_t x)
^~~~~~~~~~~~
In file included from /builds/buildroot.org/buildroot/output/build/uboot-2018.01/scripts/dtc/libfdt/fdt.c:51:0:
/builds/buildroot.org/buildroot/output/build/uboot-2018.01/scripts/dtc/libfdt/libfdt_env.h:81:24: note: previous definition of 'fdt16_to_cpu' was here
static inline uint16_t fdt16_to_cpu(fdt16_t x)
https://gitlab.com/buildroot.org/buildroot/-/jobs/88314891
Fix it by bumping the u-boot version to 2018.07.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
u-boot 2018.05 now fails to build with the following error:
HOSTCC scripts/dtc/flattree.o
In file included from /builds/buildroot.org/buildroot/output/host/include/libfdt.h:54:0,
from /builds/buildroot.org/buildroot/output/build/uboot-2018.05/scripts/dtc/libfdt/fdt.c:54:
/builds/buildroot.org/buildroot/output/host/include/libfdt_env.h:82:24: error: redefinition of 'fdt16_to_cpu'
static inline uint16_t fdt16_to_cpu(fdt16_t x)
^~~~~~~~~~~~
In file included from /builds/buildroot.org/buildroot/output/build/uboot-2018.05/scripts/dtc/libfdt/fdt.c:51:0:
/builds/buildroot.org/buildroot/output/build/uboot-2018.05/scripts/dtc/libfdt/libfdt_env.h:81:24: note: previous definition of 'fdt16_to_cpu' was here
static inline uint16_t fdt16_to_cpu(fdt16_t x)
^~~~~~~~~~~~
https://gitlab.com/buildroot.org/buildroot/-/jobs/88314886
Fix it by bumping the u-boot version to 2018.07.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit replaces the loop copying out-of-tree DTS into the kernel
tree by a make foreach loop instead of a shell for loop. This allows
to error out if one of the DTS file cannot be copied (for example if
it doesn't exist).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
coroutine module does use chrono directly:
./libs/coroutine/performance/asymmetric/segmented/Jamfile.v2: <library>/boost/chrono//boost_chrono
./libs/coroutine/performance/asymmetric/Jamfile.v2: <library>/boost/chrono//boost_chrono
./libs/coroutine/performance/symmetric/segmented/Jamfile.v2: <library>/boost/chrono//boost_chrono
./libs/coroutine/performance/symmetric/Jamfile.v2: <library>/boost/chrono//boost_chrono
So put back select of chrono for coroutine
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
chrono is selected by thread (see libs/thread/build/Jamfile.v2):
rule usage-requirements ( properties * )
{
[...]
result += <library>/boost/chrono//boost_chrono ;
}
So add this select for BR2_PACKAGE_BOOST_THREAD and remove it from
BR2_PACKAGE_BOOST_COROUTINE, BR2_PACKAGE_BOOST_LOG,
BR2_PACKAGE_TYPE_ERASURE and BR2_PACKAGE_BOOST_WAVE
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Retrieve correct appversion.default (9700) from upstream
Without this patch, the wrong version is displayed in the web ui and
when the user checks for an update, domoticz wrongly says that a new
version is available
This issue was reported by an email from Eyal Eshed <eeshed@coldroll.ca>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes: https://www.samba.org/samba/history/samba-4.8.4.html
Fixes
o CVE-2018-1139 (Weak authentication protocol allowed.)
o CVE-2018-1140 (Denial of Service Attack on DNS and LDAP server.)
o CVE-2018-10858 (Insufficient input validation on client directory
listing in libsmbclient.)
o CVE-2018-10918 (Denial of Service Attack on AD DC DRSUAPI server.)
o CVE-2018-10919 (Confidential attribute disclosure from the AD LDAP
server.)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained in pkg-generic.mk, all variable references inside the
inner-xxx-package should use $$(...). Otherwise, they are evaluated
too early, and will not contain the expected value. In the content of
the pkg-golang infrastructure, the <pkg>_SRC_DOMAIN, <pkg>_SRC_VENDOR
and <pkg>_SRC_SOFTWARE variables were not properly escaping their
reference to the $$($(2)_SITE) variable.
This was not visible until now, as only target Go packages were
supported, where $(2)_SITE was always defined prior to this macro
being expanded. With the upcoming support of host Go packages, we need
to fix this, as $(2)_SITE may be defined later, inherited from
$(3)_SITE.
Signed-off-by: Mirza Krak <mirza.krak@northern.tech>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes [1]:
make[2]: Entering directory '.../build/qt5serialbus-5.11.1/examples'
Some of the required modules (qtHaveModule(widgets)) are not available.
Skipped.
[...]
cp -dpfr .../host/mips64el-buildroot-linux-gnu/sysroot/usr/lib/qt/examples/serialbus .../target/usr/lib/qt/examples/
cp: cannot stat '.../host/mips64el-buildroot-linux-gnu/sysroot/usr/lib/qt/examples/serialbus': No such file or directory
[1] http://autobuild.buildroot.net/results/147809b5f8758af935bee48c0fc83fd86a8509e9
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using uclibc libdevmapper.so was calling dm_task_get_info_base()
function recursively, leading to segmentation fault. This was
happening because uclibc linker loader just takes first existing
'dm_task_get_info' (which is 'dm_task_get_info_base') symbol in elf
binary, instead of default version.
Add upstreamable lvm2 patch [1], which introduces
--enable-symvers[=STYLE] switch. Use that switch to disable symbol
versions, as we do not plan to support binaries compiled against
old libdevmapper library.
Fixes bug #10781.
[1] https://www.redhat.com/archives/dm-devel/2018-July/msg00187.html
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Problem starting lighttpd application with systemd.
/usr/sbin/lighttpd -D -f /etc/lighttpd/lighttpd.conf
2018-06-22 11:21:34: (server.c.733) opening errorlog '/var/log/lighttpd-error.log' failed: Permission denied
2018-06-22 11:21:34: (server.c.1420) Opening errorlog failed. Going down.
Lighttpd can not write the 'lighttpd-access.log' and 'lighttpd-error.log' files
to the directory '/var/log/'.
When using systemd the directory '/var/log' does not allow the user www-data to
write.
To correct the problem, we add /usr/lib/tmpfiles.d/lighttpd.conf.
This file create the 'lighttpd-access.log' and 'lighttpd-error.log' files with
the permission
Signed-off-by: Laurent Hartanerot <laurent.hartanerot@atos.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ATF in version 1.2 fails to build with:
./build/juno/release/bl1/context_mgmt.o: In function `cm_prepare_el3_exit':
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): undefined reference to `cm_set_next_context'
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): relocation truncated to fit: R_AARCH64_JUMP26 against undefined symbol `cm_set_next_context'
This has been fixed in ATF v1.3. Even though there are even newer
versions of ATF available, we take a conservative approach, and bump
to the first version that has the build issue fixed.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/88314771
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
512B is not a correct size to express "512 bytes", and causes a
genimage failure:
ERROR: Invalid size suffix 'B' in '512B'
To express "512 bytes", using just "512" is sufficient. With this
commit, genimage works fine, and we indeed have a 512 bytes unused
partition:
$ fdisk -l output/images/sdcard.img
Disk output/images/sdcard.img: 60 MiB, 62915584 bytes, 122882 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x00000000
Device Boot Start End Sectors Size Id Type
output/images/sdcard.img1 1 1 1 512B 0 Empty
output/images/sdcard.img2 2 524289 524288 256M 83 Linux
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/88314963
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2cdfa6c849 ("synopsys/axs10x:
Update /etc/inittab by post-build"), two Synopsys platforms were
changed to use a post-build script adding an extra getty in the
inittab instead of a rootfs overlay containing a custom
inittab. However, in this commit, configs/snps_archs38_vdk_defconfig
was not changed, even though it was using the same rootfs overlay.
This commit therefore adjusts configs/snps_archs38_vdk_defconfig to
also use the newly introduced post-build script, fixing the build of
configs/snps_archs38_vdk_defconfig.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/88314952
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With some "old" toolchains (glibc, uclibc in version 4.9.4, 5.3, 5.4,
5.5 ...), the following error is raised by the compiler:
../src/screen.cxx:60:29: required from here
/usr/lfs/v0/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/ext/new_allocator.h:120:4:
error: no matching function for call to 'std::pair<const screen_functions* const, std::unique_ptr<Page> >::pair(const screen_functions*, Page*)'
[...]
/usr/lfs/v0/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/bits/stl_pair.h:112:26:
note: candidate: constexpr std::pair<_T1, _T2>::pair(const _T1&, const _T2&) [with _T1 = const screen_functions* const; _T2 = std::unique_ptr<Page>]
_GLIBCXX_CONSTEXPR pair(const _T1& __a, const _T2& __b)
^
/usr/lfs/v0/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/mips-linux-gnu/include/c++/5.3.0/bits/stl_pair.h:112:26:
note: no known conversion for argument 2 from 'Page*' to 'const std::unique_ptr<Page>&'
This is due to the fact that init function of screen_functions
structure returns Page* but PageMap wants a std::unique_ptr<Page>
To fix this, cast raw pointer into a unique_ptr with an explicit cast
Fixes:
- http://autobuild.buildroot.net/results/d8a7339d8bdd5cdc6bd1716585d4bcf15a2e8015
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As noted by Arnout in [1], the logic in mesa3d-headers.mk generates a
bogus dri.pc file, which looks like this:
prefix=/usr
exec_prefix=/usr
libdir=/lib
includedir=/include
dridriverdir=/dri
Indeed, the ${...} are expanded as shell variables when the sed
command is executed, while the intention is that those ${...} should
go in the .pc file. By escaping those using $${...}, we get the
expected .pc file:
prefix=/usr
exec_prefix=/usr
libdir=${exec_prefix}/lib
includedir=${prefix}/include
dridriverdir=${libdir}/dri
This was detected by the not yet committed check-package improvement
from Ricardo that detects bogus ${...} usage to reference make
variables.
[1] http://lists.busybox.net/pipermail/buildroot/2018-July/225402.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes configure warning:
checking for SPEEX... yes
checking for SPEEXDSP... no
configure: WARNING: Package speexdsp was not found in the pkg-config search path.
Perhaps you should add the directory containing `speexdsp.pc'
to the PKG_CONFIG_PATH environment variable
Package 'speexdsp', required by 'world', not found.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently makedevs silently ignores extended attributes with leading
whitespace, for example those added to a <PACKAGE>_PERMISSIONS following
the recommended style from check-package.
Makedevs already ignores leading whitespace for normal entries (file
permission changes and device files creation). Do the same for extended
attributes.
Fixes: #11191.
Reported-by: Jean-pierre Cartal <jpcartal@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit b35ad5d0b4 (ncurses: make host-ncurses use host terminfo), we
are now pointing host-ncurses to the host terminfo (typically) located in
/usr/share/terminfo.
With this change we are reusing the existing host terminfo database, so
there is no point in trying to install our own on top. The user running
buildroot typically will have no write access to /usr/share/terminfo, but
tic in that case falls back to writing the database to $HOME/.terminfo.
Neither of which are desirable.
In case $HOME/.terminfo also isn't writable, tic fails, breaking the install
step for host-ncurses:
** Building terminfo database, please wait...
Running sh ./shlib tic to install /usr/share/terminfo ...
You may see messages regarding extended capabilities, e.g., AX.
These are extended terminal capabilities which are compiled
using
tic -x
If you have ncurses 4.2 applications, you should read the INSTALL
document, and install the terminfo without the -x option.
"terminfo.tmp", line 21272, terminal 'v3220': /home/peko/.terminfo: permission denied (errno 30)
To fix all of this, simply disable the terminfo database install.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
chrony calls getrandom() at startup if available, so it needs a workaround
for the blocking behaviour on recent (4.14.39+), similar to what was done
for util-linux in commit c4d86707cd (util-linux: add two upstream patches
to fix blocking on getrandom() with recent kernels).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reformats
0002-patch-source3__libads__kerberos_keytab.c.patch as a Git-formatted
patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patches for the following security issues:
CVE-2017-14501 - An out-of-bounds read flaw exists in parse_file_info in
archive_read_support_format_iso9660.c when extracting a specially
crafted iso9660 iso file.
CVE-2017-14502 - Off-by-one error for UTF-16 names in RAR archives,
leading to an out-of-bounds read in archive_read_format_rar_read_header.
CVE-2017-14503 - Out-of-bounds read within lha_read_data_none() in
archive_read_support_format_lha.c when extracting a specially crafted
lha archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
linuxptp missing.h header implements a replacement clock_nanosleep()
function, which was used when the thread implementation was not NPTL,
because uClibc failed to provide clock_nanosleep() in such
configurations.
However, uClibc-ng has fixed this problem upstream, and has backported
this change in Buildroot in patch
package/uclibc/0002-librt-declare-clock_nanosleep-independent-of-thread-.patch
(the code is upstream and will be part of uClibc-ng 1.0.31). Due to
this, there is now a conflicting definition of clock_nanosleep()
between the C library and the linuxptp missing.h code, which manifests
itself by the following build failure:
missing.h:117:19: error: static declaration of 'clock_nanosleep' follows non-static declaration
static inline int clock_nanosleep(clockid_t clock_id, int flags,
^~~~~~~~~~~~~~~
In file included from clockadj.h:24:0,
from clockadj.c:24:
This commit fixes that by adding a patch that removes the replacement
clock_nanosleep() implementation from the linuxptp code base.
Fixes:
http://autobuild.buildroot.net/results/bf400095a853f5beb28c77a50fcffefe52c3d769/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 18e8cf159177100e69d528293f8cf6875c0b1bca (kernel)
The last Qemu kernel update [1] introduced a regresion in sh4 SCIF
serial device. Some keyboard presses are very slow to be taken into
account, perhaps not even taken into account at all. This would
explain why our test infrastructure doesn’t manage to login as root
[2][3][4].
git bisect reported a kernel patch from 4.11, increasing RX FIFO
trigger defaults value for sh-sci (H)SCIF. The kernel patch itself
looks good but the Qemu emulation is not ready to handle this new
setting.
>From Qemu (2.12.0): target/sh4/README.sh4
"Configuration of the second serial port (SCIF) is supported. FIFO
handling infrastructure has been started but is not completed yet."
We can't use the first serial port (ttySC0) because it's the second
SH UART that's emulated by Qemu.
In order to be able to test sh4 architecture with newer kernel,
revert to the old behaviour.
[1] 03fb00f217
[2] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006425
[3] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006427
[4] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006426
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prevent creating a dangling symlink when vim is not present on the host
machine. With BR2_ROOTFS_MERGED_USR, just link to "vim", since they are
on the same directory, otherwise link to "../usr/bin/vim".
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gnuradio needs host-python2 however there is no way to enforce this so
add a dependency on !BR2_PACKAGE_PYTHON3.
Indeed, if BR2_PACKAGE_PYTHON3 is selected, then buildroot will only
build host-python3.
This issue was not raised in the previous version of gnuradio as
host-python-cheetah was the only dependency and host-python-cheetah
enforces python2 through HOST_PYTHON_CHEETAH_NEEDS_HOST_PYTHON however
we now have host-python-six and host-python-mako dependencies and it
does not seem right to enforces python2 on those packages
Fixes:
- http://autobuild.buildroot.net/results/a502fef3e2a40f38ca63332440b0b6bd2ed11d5a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes build issue with network-manager package when polkit package is
enabled:
CCLD clients/cli/nmcli
clients/common/clients_cli_nmcli-nm-polkit-listener.o: In function `compare_users':
nm-polkit-listener.c:(.text.compare_users+0x48): undefined reference to `polkit_unix_user_get_name'
clients/common/clients_cli_nmcli-nm-polkit-listener.o: In function `initiate_authentication':
nm-polkit-listener.c:(.text.initiate_authentication+0x1c4): undefined reference to `polkit_unix_user_get_name'
Happening with the following defconfig:
BR2_arm=y
BR2_cortex_a8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_NETWORK_MANAGER=y
BR2_PACKAGE_SYSTEMD_POLKIT=y
Signed-off-by: Artem Panfilov <apanfilov@spectracom.com>
[Thomas: update hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 51435be1f1 ("linux-firmware:
bump version to latest 8d69bab"), the hash of the LICENSE.amdgpu was
not updated as it should have been. Indeed, there was a copyright year
change in this file:
-Copyright (C) 2017 Advanced Micro Devices, Inc. All rights reserved.
+Copyright (C) 2018 Advanced Micro Devices, Inc. All rights reserved.
which changed the hash of this license file.
Fixes:
http://autobuild.buildroot.net/results/cc0e44fa854597b8a83dfdcd6435cb55af1c8571/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 51435be1f1 ("linux-firmware: bump
version to latest 8d69bab") bumped the linux-firmware package, but
forgot to update the hash file accordingly for the license files.
Especially, the WHENCE file contains the list of all licenses for the
different firmware, so it gets updated pretty much whenever a new
firmware is added or a firmware is updated.
Update its hash to fix legal-info for the linux-firmware package, and
therefore fix:
http://autobuild.buildroot.net/results/9795ac912d1bbe66386be9286f1703cdbe0a8898/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_PULSEAUDIO_HAS_ATOMIC dependency of
BR2_PACKAGE_PULSEAUDIO was not properly propagated to reverse
dependencies, causing the following kconfig warning:
warning: (BR2_PACKAGE_ESPEAK_AUDIO_BACKEND_PULSEAUDIO && BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_PULSE && BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE && BR2_PACKAGE_KODI_PULSEAUDIO && BR2_PACKAGE_MPD_PULSEAUDIO && BR2_PACKAGE_EFL_PULSEAUDIO) selects BR2_PACKAGE_PULSEAUDIO which has unmet direct dependencies (BR2_PACKAGE_PULSEAUDIO_HAS_ATOMIC && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS && !BR2_STATIC_LIBS && BR2_USE_MMU)
This commit fixes that by propagating the dependency as it should have
been done.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To get GStreamer ready for introspection, we must first explicitly
disable gstreamer1, plugins base and plugins bad from using
introspection. If not, adding the gobject-introspection will result in
these packages failing to build because setting the
_GIR_EXTRA_LIBS_PATH variable is required.
The other gstreamer1 packages do not require setting the
_GIR_EXTRA_LIBS_PATH variable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building on a ppc64le host we see this error:
build/genmatch --gimple ../../gcc/match.pd \
> tmp-gimple-match.c
../../gcc/match.pd:120:1 error: expected (, got NAME
negative value by 0 gives -0, not +0. */
This was reported upstream[1] and fixed on the GCC 6 [2] and GCC 7 [3]
branches:
Backport from mainline
2018-01-10 Kelvin Nilsen <kelvin@gcc.gnu.org>
* lex.c (search_line_fast): Remove illegal coercion of an
unaligned pointer value to vector pointer type and replace with
use of __builtin_vec_vsx_ld () built-in function, which operates
on unaligned pointer values.
The patches included in Buildroot contain just the code changes, and not
the changelog, to make it easer to manage backporting.
Tested on Ubuntu Cosmic ppc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86162
[2] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=261621
[3] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=262243
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The acl source code uses pragmas inside functions, which is not
supported by gcc 4.4, still in use in older distributions. This commit
adds a patch that drops such pragma. Indeed, this acl is not built
with -Werror, the warning removals are not that important.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GCC 4.4 and before do not support a message associated to the
"deprecated" gcc attribute. Since such messages are not that useful in
the context of Buildroot, this commit adds a patch that removes them
in the attr source code.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In a static-only configuration, mariadb fails to build because it
tries to build a shared library:
[ 18%] Linking CXX shared module ha_spider.so
output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/lib/libstdc++.a(eh_globals.o)(.text.__cxa_get_globals_fast+0x14): R_ARM_TLS_LE32 relocation not permitted in shared object
This is not detected by the autobuilders, because mariadb is part of a
Config.in choice, and such choices are not randomized by our current
testing infrastructure.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are two comments inside the post install define block that show up in
the build. Fix this by moving the comments outside the block.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GHOSTSCRIPT_FONTS_TARGET_DIR is set to $(TARGET_DIR)/usr/share/fonts/gs
in ghostscript-fonts.mk. If we pass this full path to ghostscript, it
will look for fonts in $(TARGET_DIR), which doesn't exist on the
target.
Instead of /usr/share/fonts/gs, use /usr/share/fonts so ghostscript can
also access other fonts than the ones installed by ghostscript-fonts.
Signed-off-by: Thomas Ehrhardt <tehrhardt@innovaphone.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new package includes new binaries for i.MX8QXP.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The help text says that BR2_DEFCONFIG will be used as input, but a
BR2_DEFCONFIG specified in the existing .config file will *not* be
used. So say explicitly that it must be specified on the command line.
Note that both "BR2_DEFCONFIG=... make defconfig" and
"make defconfig BR2_DEFCONFIG=..." will work.
While we're at it, add a semicolon to separate the two statements.
Note that this overflows the help text beyond 80 characters, but that
is already the case in many other lines.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting initial release notes:
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
"This package combines the protocol headers, which were formerly
scattered in individual packages. At this point none of them are
changing rapidly enough to justify such fine granularity, particularly
when what changes do occur tend to affect multiple extensions at once
(Present and DRI3 for example). The individual protocols are still
installed as separate pkg-config modules, and consumers should continue
to use the per-protocol package version numbers."
Some xproto_* packages are host-packages so we need to add
host-autotools-package to this package as well.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
- indicate that this feature requires U-Boot 2018.07, since commit
c7df098a71e05dc81cee818747759e8060b59626 is needed.
- define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The postgresql package is now built with --with-libxml if
BR2_PACKAGE_LIBXML2 is selected to allow the use of XML functions in
postgresql.
Signed-off-by: Daniel Deterding <dde@innovaphone.com>
Signed-off-by: Thomas Ehrhardt <tehrhardt@innovaphone.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the license as found in the actual source file, and remove the README
from _LICENSE_FILES as it does not contain anything regarding licenses.
Note that adding the source file as LICENSE_FILE means that the
corresponding hash will be different on every version bump.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license of this package is not standard, it is a combination of two
sets of statements coming from two different authors.
The license resembles the original 4-clause BSD license (thus including
advertising clause) but without the third clause about endorsement.
The label 'BSD-4-Clause-like' nevertheless seems the closest match.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patches now present upstream and drop no longer needed
autoreconf.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During investigation of adding gcrypt support in perl-net-ssh2, it became
clear that its build system is trying to find libraries via host search
paths, i.e. /usr/lib64/ etc.
This can be avoided by explicitly passing a 'lib' and 'inc' path.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
perl-net-ssh2 requires zlib. When using the openssl backend to libssh2, this
dependency is implicit via openssl, but when using the libgcrypt backend the
dependency is missing.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove first two patches (already in version)
- Rename third patch so it is now the first one
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As kernel wireless wiki doesn't seem to have the doc about wl12xx
calibration, points to a backup of the old site.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a bug-fix release that fixes a couple memory leaks and bugs in
python bindings discovered in the v1.1 release.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
arm64 systems support SMBIOS, so update the dmidecode config
to allow building dmidecode for arm64.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2018.05 version and kernel to 4.17.8.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8 started warning about function aliases that have a non-matching
prototype. This seems rather useful in general, but it causes tons of
warnings in the Linux kernel, where we rely on abusing those aliases
for system call entry points, in order to sanitze the arguments passed
from user space in registers.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
Disable the attribute-alias warning introduced by gcc-8 by adding
-Wno-attribute-alias to KCFLAGS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add optional build of rfcomm which requires readline.
Update license hash as authorship has been updated in the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The nghttp2 package has recently been added to buildroot. When
enabled, this adds support for HTTP2 to libcurl.
By default, libcurl configure script will enable HTTP2 if the library
is found using pkg-config. Adding this option makes the build
consistent.
Signed-off-by: Michaël Burtin <michael.burtin@netgem.com>
Signed-off-by: Anisse Astier <anisse.astier.ext@netgem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow user to override the hardcoded dtb name by using
BR2_ROOTFS_POST_SCRIPT_ARGS.
The only user of this script, configs/freescale_imx8mqevk, is updated
accordingly.
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With cmake packages, we are only using TARGET_LDFLAGS for executables
and not for shared libraries.
This patch adds CMAKE_SHARED_LINKER_FLAGS and
CMAKE_MODULE_LINKER_FLAGS to the cmake toolchain file so that
buildroot TARGET_LDFLAGS are used for shared and module libraries.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The bind configure.in now checks for "${with_zlib}/include/zlib.h".
Remove the redundant "include/".
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>From the release note:
This is a point release over the previous 2.31 version, which was
necessary as a source file was accidentally omitted from that
release.
This release also contains a fix for PR gold/23409 where the gold
linker could end up creating duplicate copies of some symbols.
https://sourceware.org/ml/binutils/2018-07/msg00286.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the output directory is nested under a long path name, calling the
gdbus-codegen, glib-genmarshal, or glib-mkenums scripts throws the
error:
> '/usr/bin/env: /...: No such file or directory'
This is because libglib2 uses the absolute path to the python
interpreter for its shebang statements, and shebangs have a max length
of 127 chars[1]. A long absolute path will be cut off and appear as a
missing file.
Since the host Python is present in the $PATH passed to all packages, we
can copy the workaround from Yocto and just use the python interpreter
in $PATH[2]. However, 'python' is used instead of 'python3' as the
scripts are compatible with both.
[1] https://linux.die.net/man/2/execve
[2] http://cgit.openembedded.org/openembedded-core/commit/?id=eef7883587acc933d6f34b559ec03ff84d18573b
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: David Owens <david.owens@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from kernel version 4.15, Linux supports loading
regulatory.db and regulatory.db.p7s files directly from /lib/firmware,
without the need of crda. If the kernel can't load those files it'll
fallback to using crda, but the direct way is preferred.
This patch copies those those files under /lib/firmware. The use of
crda shouldn't be necessary with kernels of 4.15 or later.
Signed-off-by: Christoph Engelbert <me@noctarius.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A C++ Web Framework built on top of Qt, using
the simple approach of Catalyst (Perl) framework.
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
[Thomas: add entry in DEVELOPERS file, move cmake-package invocation
to the end of .mk file, select BR2_PACKAGE_OPENSSL.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for flashing the u-boot-dtb.imx binary in the SD card
when a target selects BR2_TARGET_UBOOT_FORMAT_DTB_IMX.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-5738: When recursion is enabled but the allow-recursion
and allow-query-cache ACLs are not specified, they should be limited to
local networks, but they were inadvertently set to match the default
allow-query, thus allowing remote queries.
Update license file hash; copyright year update.
Add reference to tarball signature key.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Host GDB suffers a serious problem: pressing backspace (or ^W ^U or any other
"delete" key) results in a plain space being printed instead, making the
command prompt almost completely unusable.
That's because it's using host-ncurses, which embeds a path for the terminfo
database into the library itself. That path ends up being something like
/home/hollisb/buildroot.git/output/host/share/terminfo, which obviously doesn't
generally exist other hosts. ('relocate-sdk.sh' cannot and does not edit
binaries like libncurses.so.6, so doesn't resolve this problem.)
/usr/share/terminfo is a far better path to use, since it almost certainly
exists on the host. Theoretically, it could be from a different ncurses version
with incompatible terminfo database format, but this doesn't seem to be a
problem in practice. (Future patches could address the theoretical problem if
it actually appears in real life.)
This change allows buildroot's host gdb, which uses ncurses 6.x, to work on
RHEL5, RHEL6, and RHEL7, which all provide terminfo from ncurses 5.x.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes assembler failure when compiling for ARC700 only:
------------------------>8---------------------
{standard input}: Assembler messages:
{standard input}:213: Error: operand out of range (128 is not between -128 and 127)
make[2]: *** [scripts/Makefile.build:317: net/ipv4/xfrm4_mode_tunnel.o] Error 1
------------------------>8---------------------
This is an upstream fix scheduled for the next release, see
5afc07eeb1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds the capnproto package. This also builds a host variant to generate
the capnp compiler that can be used to compile message definitions into
C++ code. Includes a patch from upstream to fix an issue with uclibc.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: only link with -latomic when BR2_TOOLCHAIN_HAS_LIBATOMIC=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link '[' directly to the coreutils binary instead of going through
'test'.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Using uboot version 2017.11 creates an sd card image which fails to
boot with the following error:
Missing DTB
### ERROR ### Please RESET the board ###
Updating tinkerboard default configuration to use latest uboot release
2018.07 creates a sd card image which boot fine.
Signed-off-by: Yannis Damigos <ydamigos@iccs.gr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when the site method is explicitly set to a SCM other than
git, the main download is correctly excluded from being hash-checked.
But when the site method is inferred from the site uri, the download
from a SCM other than git is wrongly being hash-checked.
Fix this by moving the code that excludes SCM methods from hash-check
below the code that infers the site method.
Currently there is no package in the tree that uses inferred site
method, and that is why the autobuilder didn't caught this. We had
packages using inferred site method in the past, the last one was
'expect', but since they didn't have a hash file (for a license or
extra-download for example) the build didn't error out.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 2017 MinnowBoard Turbot skews no longer use the Realtek 8169
Ethernet chip. The Turbot D0 uses The Intel I211, the Turbot Dual
Ethernet has an I210 (quad-core) or I211 (dual-core).
Add CONFIG_IGB to the Linux config but keep the Realtek 8169 support
to avoid breaking older boards
Tested on Turbot D0, lspci -k shows the igb driver is used:
03:00.0 Class 0200: 8086:1539 igb
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-0500: curl might overflow a heap based memory buffer when
sending data over SMTP and using a reduced read buffer.
Drop upstream patch.
Add reference to tarball signature key.
Drop CRYPTO_lock seed. Removed from configure script since 7.45.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of attr uses a canned custom buildsystem, that
is borked in quite a few ways (no support for static, overwrites
destination files without unlinking...)
There has been a release recently-ish, with a complete overhaul of
the buildsystem. We can now drop all our patches.
The option to disable NLS has changed, so update accordingly.
Fixes: #10986
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
[Arnout: use the original SITE instead of a specific mirror]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Of most interest is the build system overhaul, and the drop of the
dependency on attr-provided <attr/xattr.h> in favour of the
system-provided <sys/xattr.h>.
That last bit meaning that we will be able to bump attr.
We can drop our patches: static is now natively supported thanks to
the use of libtool, and the internal symbols patch was a backport,
and finally, our install patch is superseded by the use of autotools.
The option to disable NLS has changed, so update accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As suggested by Arnout during the review of
http://patchwork.ozlabs.org/patch/934589, add a mechanism to detect a
missing boost select by checking that we do not install a boost library
which hasn't been selected by the user.
To manage a change of boost configuration by the user between two
builds, add a BOOST_PRE_INSTALL_TARGET_HOOKS to remove all boost
libraries before installing them.
Also, use ls with a wildcard instead of test to avoid trying to guess
library names if boost layout is set to tagged or versionned (the
wildcard will also help us to manage shared or static library)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the stdout is consigned to oblivion, while the stderr is not
redirected at all. So, when the configuration under test redefines a
symbol, like is the case when testing busybox for example, there is an
ugly warning.
So, just redirect both stdout and stderr to the logfile.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a defconfig for the Olimex A10-OLinuXino-LIME, reusing most
of the A20-OLinuXino-Lime and A13-OLinuXino files (sym links).
The configurations for Olimex A10-OLinuXino-LIME feature:
- U-Boot 2018.03
- Mainline Linux kernel 4.14.26
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
[Arnout: remove commented-out BR2_ARM_EABIHF=y (which is default)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* chacha20poly1305: use slow crypto on -rt kernels on arm too
Leftover from the last commit of the previous snapshot that we forgot to
handle.
* tools: getentropy requires macOS 10.12
Small build time fixup for old versions of macOS.
* queueing: remove useless spinlocks on sc
* queueing: re-enable preemption periodically to lower latency
* simd: encapsulate fpu amortization into nice functions
* simd: no need to restore fpu state when no preemption
This will improve general system latency on preempt-enabled systems, like
desktops.
* dns-hatchet: apply resolv.conf's selinux context to new resolv.conf
Fixes wg-quick's dns hatchet on CentOS.
* qemu: bump default kernel
By bumping to 4.17.2, we actually uncovered a bug in the SLUB allocator, which
upstream is now fixing: https://lkml.org/lkml/2018/6/18/1407
* noise: take locks for ss precomputation
* netlink: maintain static_identity lock over entire private key update
Minor locking correctness fixes and optimizations.
* noise: wait for crng before taking locks
We now make sure that an outgoing packet which needs a potentially unseeded
rng won't block a call to wg(8), which takes similar locks for retrieving
data.
* receive: drop handshake packets if rng is not initialized
If the rng is unseeded, we drop incoming handshake packets, so that it's not
possible for an attacker to fill the handshake queue thereby provoking
cookies.
* ratelimiter: mitigate reference underflow
* ratelimiter: do not allow concurrent init and uninit
Minor correctness and hardening fixes, which don't fix anything particular in
WireGuard, but might be useful if our ratelimiter is ever used elsewhere.
* compat: use stabler lkml links
* poly1305: add missing string.h header
Minor fixups.
* receive: don't toggle bh
The last snapshot caused a big performance regression, which we partially
revert here. This general matter, though, will be revisited in the future,
perhaps by switching to NAPI.
* main: test poly1305 before chacha20poly1305
* poly1305: give linker the correct constant data section size
While the default bfd linker did the right thing, gold would sometimes merge
section incorrectly because of an incorrect section length field, resulting in
wrong calculations.
* simd: add missing header
Fixes a compile error on a few odd kernels.
* global: fix a few typos
* manpages: eliminate whitespace at the end of the line
* tools: fix misspelling of strchrnul in comment
Cosmetic fixups.
* global: use ktime boottime instead of jiffies
* global: use fast boottime instead of normal boottime
* compat: more robust ktime backport
We now use the equivalent of clock_gettime(CLOCK_BOOTTIME) for doing age
checks on time-limited objects, such as ephemeral keys, so that on systems
where we don't clear before sleep (like Android), we make sure to invalidate
the objects after the proper amount of time, taking into account time spent
asleep.
* wg-quick: android: prevent outgoing handshake packets from being dropped
Recent android phones block outgoing packets using iptables while the system
is asleep. This makes sense for most services, but not for a tunnel device
itself, so we work around this by inserting our own iptables rule.
* device: print daddr not saddr in missing peer error
* receive: style
Debug messages now make sense again.
* wg-quick: android: support excluding applications
Android now supports excluding certain apps (uids) from the tunnel.
* selftest: ratelimiter: improve chance of success via retry
* qemu: bump default kernel version
* qemu: decide debug kernel based on KERNEL_VERSION
Some improvements to our testing infrastructure.
* receive: use NAPI on the receive path
This is a big change that should both improve preemption latency (by not
disabling it unconditionally) and vastly improve rx performance on most
systems by using NAPI. The main purpose of this snapshot is to test out this
technique.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add license and license hash.
Change git download site. The git download method does not work with
BR2_KERNEL_MIRROR that is set to https://cdn.kernel.org/pub by default.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
attr and busybox may each install setfattr, so attr must be installed
before busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since netcat would be installed before busybox, we don't need to remove
a pre-installed 'nc' anymore.
If another netcat implementation (e.g. netcat-openbsd) is also enabled,
there is no way to tell which would win in the end, especially when we
add TLPB, in which case that will be forbidden.
So, we don't need to remove anything anymore.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We only need that dependency when nmap's ncat is enabled.
For consistency, we add a dependency on nmap, not a suboption of it,
to have a dependency list in busybox that is only about packages, and
directly associates the upper-case package variable to the lower-case
package name, e.g. NMAP <-> nmap.
Thus, if BR2_PACKAGE_NMAP_NCAT is selected, we have a redundant
dependency. But that doesn't hurt and it really simplifies things.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In so doing, we must now ensure that busybox does not overwrite
the startup script already installed by syslog-ng.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The two patches are still needed, with the second needing a slight
refresh around the edge.
Since upstream has now full support to perform a noclobber install, drop
our BUSYBOX_NOCLOBBER_INSTALL hook and use the new install rule.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gnutls support has been added since version 1.5.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
openssl support has been added since version 1.5.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Remove patch (already in version)
- Update hash of license file: AES section has been removed:
303fde909f
The AES section was BSD-3-Clause as well, so nothing changes in
LIBZIP_LICENSE.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Increase the filesystem size for raspberrypi3 by setting
BR2_TARGET_ROOTFS_EXT2_SIZE to "120M". The filesystem for
raspberrypi3_64 has the same size. The size is so large because the
kernel config enables many many modules.
Fixes:
Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "services"
mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system
This error is not reproducible, it seems to depend on e.g. directory
ordering.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We need to install polkit before systemd if we want to enable
polkit integration, because systemd will not install polkit
policy files unless it finds polkit-gobject-1.
Signed-off-by: Asgeir Bjarni Ingvarsson <asgeir@appdynamic.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some i.MX boards which use device tree to describe the hardware
for U-Boot generate a u-boot-dtb.imx binary.
Introduce the BR2_TARGET_UBOOT_FORMAT_DTB_IMX option to
handle such case.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pigz website seems to only host the latest release tarball.
Chances are that the 2.4 tarball will disappear when 2.5 comes out.
Instead, use the Github tarballs provided by the developer. Comparison
between the 2.4 / v2.4 tarballs shows that only the .gitignore file is
added.
Suggested-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The original site www.liblogging.org has been taken down because of the
new European data protection regulation (GDPR), to which it was not
compliant.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If Buildroot is run from a folder containing a '@' in the path, automake
will fail since the aclocal Perl script will interpret what is after the
'@' as an array in its system include paths. This was fixed in automake
1.16.1.
Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 6be346cec4,
DOMOTICZ_CXXFLAGS is not set anymore so remove it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The BR2_PACKAGE_ALSA_UTILS_BAT option currently selects
BR2_PACKAGE_FFTW. However, it turns out that fftw is not a mandatory
dependency to build alsabat, just an optional dependency.
This commit therefore turns this dependency into an optional
one. However, it is not just FFTW that is necessary, but the simple
precision version of FFTW, so the optional dependency takes this into
account.
We take this opportunity to extend the Config.in help text for
BR2_PACKAGE_ALSA_UTILS_BAT.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The zstd (de)compression tool may be used in post-image scripts to
compress certain elements of the final image.
In order to allow that, make host-zstd selectable in the 'Host
utilities' menu, and build the binary in addition to the library.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Perf profiling cannot be used if CONFIG_PERF_EVENTS is not enabled in the
kernel configuration. Similar to other tools, like ktap, we can enable the
right options automatically.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the exim package was added, it included a template for the
build-time configuration file Local/Makefile in the package directory.
In commit 8956779d5d (exim: use a more standard build-time
configuration), this template file was replaced with the EDITME
template file included in the exim sources. However, that commit did
not remove Buildroot's Local-Makefile.
Since this file is no longer used, remove it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dropbear by default enables a number of algorithms that are now considered
insecure and should only be used when legacy support is required:
3DES encryption
Blowfish encryption
SHA1-96 message integrity
CBC encryption mode
DSA public keys
Diffie-Hellman Group1 key exchange
So disable them by default, but add a config option for bringing them back.
Furthermore the Blowfish legacy algorithm is unconditionally disabled
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel 4.17.4 contains commit 32c319d4f120 ("pinctrl: devicetree: Fix
pctldev pointer overwrite"), which fixes camera support
on imx6-sabresd board, so bump to this kernel version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel 4.17.4 contains commit 32c319d4f120 ("pinctrl: devicetree: Fix
pctldev pointer overwrite"), which fixes audio support
on imx53loco board, so bump to this kernel version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Display the dependencies comment only when network-manager is enabled.
Otherwise, a toolchain configuration change would not make the package
selectable.
Cc: Pierre Ducroquet <pinaraf@pinaraf.info>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Display the dependencies comment only when modem-manager is enabled.
Otherwise, a toolchain configuration change would not make the package
selectable.
Cc: Pierre Ducroquet <pinaraf@pinaraf.info>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
modemmanager-qt is a simple Qt wrapper on the ModemManager API.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- fix commit title
- update to 5.47
- add hash for license file
- add missing dependency on qt5base
- add missing dependency on Qt5 DBus module
- use "depends on" instead of "select" for modemmanager dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few new features have been add and a lot of bugs have been fixed in
minor release Vim 8.1.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/15cc6523a42bf66508b2b37fd1fcb74625561ec2/
btrfs-progs 'make install' installs headers under $(prefix)/include/btrfs,
but our patch to also install headers for 'install-static' installed
directly into $(prefix)/include, confusing other packages as btrfs-progs
headers have very common names such as version, sizes.h, list.h, ioctl.h, ..
Fix it by adjusting the patch to also install under $(prefix)/include/btrfs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the i686 package list to install when using pre-built 32 bits
binaries with a redhat/fedora host distribution (glibc.i686 and
zlib.i686).
Signed-off-by: David De Grave (Essensium/Mind) <david.degrave@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Qt 5.11, the headers are not installed anymore.
The issue comes from a update in qt5base [1] which is not backported to
qt5webkit because it is not officially supported anymore by Qt.
Fixes build issues with qt5webkit-examples that requires QtWebKit
headers:
In file included from main.cpp:42:
window.h:46:10: fatal error: QWebElement: No such file or directory
#include <QWebElement>
^~~~~~~~~~~~~
compilation terminated.
[1]: 9c4c136bc9
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit regenerates the patch
0001-poco-add-the-staging-path-to-search-path.patch to not have
numbering.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we dropped support for blackfin, we no longer have any
architecture that supports FDPIC, so BR2_ARCH_HAS_FDPIC_SUPPORT
is never selected, so we can't select BR2_BINFMT_FDPIC.
Drop all of that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd can use libpcre2 when available, so this commit adds the
detection of this library.
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit db860d7837 ("systemd: bump
to 236, convert to meson"), we're no longer using the autotools build
system, and have switched to meson. Therefore, patching m4 files is no
longer useful.
Suggested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* remove upstreamed patches
* refresh patch 0002 which didn't apply cleanly
* update patch 0001 to catch more uses of agetty
* the README file hash has changed because some parts of this file
were modified between v237 and v239, but the modifications are not
related to licensing aspects
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[Thomas: regenerate patches with less "noise", update README file
hash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
WebEngine is a big project to build. It uses ninja which is a build
system that does everything in parallel[1].
Builds are always run in parallel, based by default on the number of
CPUs your system has. Underspecified build dependencies will result in
incorrect builds.
QtWebEngine does not propagate the parallel flag from the running
instance of make to ninja. Thus, all the machine cores are used to build
this single project.
make -j 10 -> ninja -j # all cores
This behavior disrupts powerful machines which are setup to build many
projects in parallel. Even worse, the build fails on machines where the
ratio CPU-cores / amount of RAM (including swap) is not appropriate. g++
may have not enough of memory to build all those files in parallel.
Unfortunatly, the target `run_ninja' is hardcoded in the Makefile
src/core/Makefile.run_gn; there is no way to propagate flags using a
variable through the make command-line.
run_ninja:
/home/gportay/src/buildroot/output-qt5.11/build/qt5webengine-5.11.1/src/3rdparty/ninja/ninja
-C /home/gportay/src/buildroot/output-qt5.11/build/qt5webengine-5.11.1/src/core/release QtWebEngineCore
Luckily, the Qt gn_run.pro[2] can hardcode ninja extra flags through the
variable NINJAFLAGS when the Makefile is generated (which is performed
during the build and not during configure step).
This commit sets the NINJAFLAGS using the variable PARALLEL_JOBS to limit
the number of cores used by ninja.
Fixes:
virtual memory exhausted: Cannot allocate memory
[1]: https://ninja-build.org/manual.html#_comparison_to_make
[2]: https://github.com/qt/qtwebengine/blob/v5.11.1/src/core/gn_run.pro#L49-L53
CC: Damien Riegel <damien.riegel@savoirfairelinux.com>
CC: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 52282828f0
("package/network-manager: add patches to build with kernel headers
3.2"), network-manager was changed to build with kernel headers as old
as 3.2, instead of 3.7 before. The dependency was changed accordingly,
but the Config.in comment was not.
This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk:193: consecutive empty lines
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
networkmanager-qt is a simple Qt wrapper on the NetworkManager API.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- Update to version 5.47.
- Instead of selecting network-manager, depend on it, it avoids
replicating all its complicated dependencies, and it's pretty
obvious if you want to use network-manager that you need network
manager.
- Needs Qt5Dbus support, so added a select BR2_PACKAGE_QT5DBUS, and
propagated the corresponding dependencies.
- Add missing dependency on qt5base in
KF5_NETWORKMANAGER_QT_DEPENDENCIES
- add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
kf5-extra-cmake-modules contains several additional CMake modules used
by the other KF5 packages. It does not install anything on the target
and contain only CMake files for the host.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- update to version 5.47
- add hash for license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
KDE Frameworks 5 is a set of libraries built on the Qt framework
providing a lot of powerfull classes and solutions for developers
building Qt applications.
Unlike the previous KDE libraries, they are split in tiny packages,
reducing dependencies as much as possible, making them usable even for
embedded projects.
This first commit introduce the kf5 packages folder.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- Needs Qt >= 5.8, so added a dependency on
BR2_PACKAGE_QT5_VERSION_LATEST
- Update to version 5.47.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The boost fiber module uses the boost context module, so it should
select it.
Due to this, the boost fiber module inherits the dependencies of boost
context: it needs exception_ptr handling, and is only available on the
architectures where boost context is supported.
Fixes:
http://autobuild.buildroot.net/results/56509d315defb95d4ac6e278a9d40cd98f61baa7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use only one comment for both gcc bug dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rework boost-context dependencies and manage them through the hidden
BR2_PACKAGE_BOOST_CONTEXT_ARCH_SUPPORTS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following patches have been updated to apply on 1.15.0:
0003-auto-set-ngx_feature_run_force_result-for-each-featu.patch
0006-auto-lib-openssl-conf-use-pkg-config.patch
The follow patch has been removed, because it was applied upstream:
0009-auto-lib-conf-fix-PCRE-condition-WRT-the-http-and-ht.patch
The license file hash has changed because the copyright years were
updated in the LICENSE file:
- * Copyright (C) 2002-2017 Igor Sysoev
- * Copyright (C) 2011-2017 Nginx, Inc.
+ * Copyright (C) 2002-2018 Igor Sysoev
+ * Copyright (C) 2011-2018 Nginx, Inc.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[Thomas: drop unneeded patch updates, improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1e3738db42 ("package/gdb: rework
dependency for C++11") erroneously added duplicate dependencies in
package/gdb/Config.in related to gcc 4.8 and C++ dependency.
One copy of those dependencies was below the select causing a
check-package warning.
Fixes:
package/gdb/Config.in:28: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We don't carry a git-formatted patch, because upstream is in fact a
collection of git trees, while the release tarball is an aggregate
of those repositories. Thus, the layout is different between the
tarball and the SCM...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Steve Kenton <skenton@ou.edu>
[Thomas:
- add host-pkgconf as a dependency of host-xorriso, since it's needed
for autoreconf to work
- drop HOST_XORRISO_AUTORECONF = YES, since it's implied by
XORRISO_AUTORECONF = YES.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-9918: mishandle certain "expected dictionary key but
found non-name object" cases, allowing remote attackers to cause a
denial of service (stack exhaustion)
https://github.com/qpdf/qpdf/issues/202
Drop local SHA256 hash since we use upstream provided SHA512.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tarball is now at github.
Switch to .tar.xz, that's the only format that upstream provides.
Add a note on tarball signature and key.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 1e2a8d4111.
Since version 1.0.30, uClibc-ng release supports the missing functions
even for Linuxthreads, therefore the dependency on NPTL is no longer
needed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Disable password file authentication, since it's not possible to have
both at once.
- Install a /etc/pam.d/sshd file, based on the one installed by openssh.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure.ac script simply uses PKG_CHECK_MODULES(), so there is
not --enable/--disable option.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the host has a DB library installed, namely LMDB, host-heimdal
will detect it and try to use, resulting in a build failure due to
missing symbols.
Really disable all the DB backends, we don't need them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All pre-built Buildroot toolchains have been rebuilt with Buildroot
2018.05, so this commit updates the corresponding configuration
fragments to make sure the autobuilders use the new toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The compiler g++ reports an error when the header arm_acle.h is
included from version 7.
This patch backports the bugfix upstreamed [1] for gcc-7 and gcc-8.
Fixes:
In file included from ../../include/QtCore/5.10.1/QtCore/private/../../../../../src/corelib/tools/qsimd_p.h:333,
from ../../include/QtCore/5.10.1/QtCore/private/qsimd_p.h:1,
from global/qlogging.cpp:58:
/home/gportay/src/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/8.1.0/include/arm_acle.h: In function ‘void __arm_ldc(unsigned int, unsigned int, const void*)’:
/home/gportay/src/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/8.1.0/include/arm_acle.h:48:46: error: invalid conversion from ‘const void*’ to ‘const int*’ [-fpermissive]
return __builtin_arm_ldc (__coproc, __CRd, __p);
^~~
<built-in>: note: initializing argument 3 of ‘void __builtin_arm_ldc(unsigned int, unsigned int, const int*)’
...
Makefile:196: recipe for target 'sub-corelib-make_first' failed
make[3]: *** [sub-corelib-make_first] Error 2
Makefile:48: recipe for target 'sub-src-make_first' failed
make[2]: *** [sub-src-make_first] Error 2
package/pkg-generic.mk:229: recipe for target '/home/gportay/src/buildroot/output/build/qt5base-5.10.1/.stamp_built' failed
make[1]: *** [/home/gportay/src/buildroot/output/build/qt5base-5.10.1/.stamp_built] Error 2
Makefile:16: recipe for target '_all' failed
make: *** [_all] Error 2
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81497
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes following linking error with uClibc-ng:
/home/peko/autobuild/instance-0/output/host/lib/gcc/powerpc-buildroot-linux-uclibc/7.3.0/libgcc.a(unwind-dw2-fde-dip.o):
In function `_Unwind_Find_FDE':
/home/peko/autobuild/instance-0/output/build/host-gcc-final-7.3.0/build/powerpc-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde-dip.c:469:
undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
Since uClibc-ng 1.0.18 a circular dependency between libc and libgcc
exist, when static linking is used. It can be resolved by the compiler
when -static is correctly passed in the linking step.
So use TARGET_CONFIGURE_OPTS to pass CC as well as LDFLAGS to make
Fixes:
- http://autobuild.buildroot.net/results/d9f0311538c8db1196839e36af3f6ef4e403be2b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the latest ARC toolchain arc-2018.03 builds of "trousers" and
"tpm-tools" packages perform without errors.
Lets enable these packages for ARC.
With the exception, building tpm-tools for ARC770/750 requires to pass
"-mno-compact-casesi" as it was made for trousers before:
see patch f4cd8ceb9c "trousers: Pass "-mno-compact-casesi" when
building for ARCv1".
This change is a temporary workaround and the feature is going to be
fixed in the next ARC toolchain release version.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sven Neumann <neumann@teufel.de>
[Thomas:
- add entry to DEVELOPERS file
- add missing dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- rework comments on the dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dehydrated is an ACME client written in bash. It should be able to run
under zsh as well, but this hasn't been tested so it isn't enabled for
now.
Normally, we would want an init script to start dehydrated, and an
example configuration file. However, it is very difficult to do this
in a generic way in Buildroot:
- we normally don't have cron running;
- we have no standard location for webroot;
- we have no standard location for certificates;
- we have no standard way to restart/reload the webserver.
So instead, provide brief documentation of how to use dehydrated in the
help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hidapi source uses iconv_open UTF-16 conversion [1] which requires
gconv libararies when buiding with glibc in order to successfully
find serial number, manufacturer and product strings [2].
Use select in the config file to autmatically select gconv libararies
for inclusion on the target when building with glibc
Tested with ./utils/test-pkg -c hidapi.cfg -p hidapi and hidapi.cfg file
contents:
BR2_PACKAGE_HIDAPI=y
BR2_PACKAGE_EUDEV=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_USE_MMU=y
BR2_USE_WCHAR=y
Also tested on x86-64 build target with application using hidapi
[1]: a6a622ffb6/libusb/hid.c (L446)
[2]: https://www.silabs.com/community/interface/forum.topic.html/cp2114_linux_sta-RtWg
Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
Tested-by: Dan Walkes <danwalkes@trellis-logic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change legacy select BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_AUDIOMIXER to
new select BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_AUDIOMIXER
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add upstream patch to fix the following compile failure:
gstvaapipluginutil.c:259:12: error: ‘GstGLDisplay’ undeclared (first use in this function); did you mean ‘GstVaapiDisplay’?
(GstGLDisplay **) & plugin->gl_display,
^~~~~~~~~~~~
GstVaapiDisplay
gstvaapipluginutil.c:259:12: note: each undeclared identifier is reported only once for each function it appears in
gstvaapipluginutil.c:259:27: error: expected expression before ‘)’ token
(GstGLDisplay **) & plugin->gl_display,
^
Also add hash for license file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Update to 1.14.1]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These are grouped together because several plugins have been re-arranged and
there is no way to individually update each plugin package.
Changes:
Add the following to gst1-plugins-base and remove them from plugins-bad:
- opengl
- gles2
- glx
- egl
- x11
- dispmanx
- audiomixer
Add the following to plugins-good and remove them from plugins-ugly:
- lame
- mpg123
moved --disable-qt from plugins-bad to plugins-good
Delete upstream patch from gst1-plugins-ugly ([1])
- 0001-x264enc-fix-build-with-newer-x264-with-support-for-m.patch
Also add hashes for the license files.
[1] https://cgit.freedesktop.org/gstreamer/gst-plugins-ugly/commit/?id=83c38dc44622611c1f67dd26e4cb383c5aef90f6
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Upate to 1.14.1]
[Removed legacy lame/mpg123 option, add Config.in.legacy handling]
[remove leftover audiomixer handling from gst1-plugins-bad.mk]
[remove upstream patch from gst1-plugins-ugly]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a patch to the host package patchelf to fix an issue
with endianness when the --make-rpath-relative option is
specified. Currently, patchelf does not take into account the
architecture of the target ELF when it performs the fixup on the
RPATH. Thus, if it differs from the host in endianness, the RUNPATH
field will be invalid. The patch fixes the bug reported here:
https://bugs.busybox.net/show_bug.cgi?id=11101
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also, add upstream patch for not fail builds on 32bit architectures.
The patch will be removed when bumping to v2018.7.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- drop host-meson dependency, unneeded since the meson-package
infrastructure is used
- add -Ddbus_daemon=/usr/bin/dbus-daemon, otherwise at-spi2-core
meson build system tries to find dbus-daemon on the host machine,
where it may not be available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the kernel version to 4.17.2.
Update U-Boot version to 2018.05.
Migrate to U-Boot generic distro configuration which is easier than the
hand written boot script.
Improve the 'dd' command example in readme.txt.
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
https://sourceware.org/ml/gdb-announce/2018/msg00001.html
gdb 8.1 has a new optional dependency on mpfr, which according to the
NEWS file:
GDB now uses the GNU MPFR library, if available, to emulate target
floating-point arithmetic during expression evaluation when the
target uses different floating-point formats than the host. At
least version 3.1 of GNU MPFR is required.
So for the target gdb, this is unnecessary, and therefore we
forcefully disable mpfr support by passing --without-mpfr.
For the host gdb, it would potentially be useful, but since it's a new
feature that isn't essential, we for now keep it disabled as well. An
option may be added later if needed.
To avoid gnulib issues with uClibc/musl, we need to pass additional
configure/make variables, like is done in OpenEmbedded [1].
[1] http://git.openembedded.org/openembedded-core/tree/meta/recipes-devtools/gdb/gdb_8.1.bb?id=02664a8dcd1ebb6cd77248e1b97a78390ea06033#n9
We re-add the same patches as the ones present for gdb 8.0.1, except
0004-nat-linux-ptrace.c-add-missing-gdb_byte-cast.patch, which was
merged upstream.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: change mpfr handling.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are about to switch to 8.0 as the default gdb version, we
need to adjust how the gdb dependencies are handled. Indeed, from 8.0
onwards, gdb needs a C++11 capable compiler, i.e at least gcc 4.8.
Until now, Config.in.host was making sure that gdb 8.0 was not
selectable if the cross-compilation toolchain did not have C++ support
with gcc >= 4.8. This worked fine because the default version of gdb,
used as the target gdb version when no host gdb is built, was 7.11,
and did not require C++11.
With the switch to 8.0 as the default version, when target gdb is
enabled but not host gdb, 8.0 is used, which means we need a C++11
capable compiler. The dependencies in Config.in.host are no longer
sufficient.
So instead, we remove the target-related dependencies from
Config.in.host and move them properly to Config.in. The overall logic
is the following:
- In Config.in.host, BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS ensures that
we have at least host gcc 4.8 if we're on ARC, because the ARC gdb
needs C++11. We remove the target toolchain related dependencies
from here.
- In Config.in.host, the version selection ensures that 8.0 cannot be
selected if the host toolchain does not have at least gcc 4.8. We
remove the target toolchain related dependencies from here.
- In Config.in.host, we introduce a BR2_PACKAGE_GDB_NEEDS_CXX11
option, that indicates whether the currently selected version of
gdb requires C++11 support in the toolchain to build the target
variant. Even though this option is more related to the target
variant of gdb, we keep it in Config.in.host so that it appears
next to the definition of BR2_GDB_VERSION, to make sure they are
kept in sync.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So the host ncurses includes and library are used instead of a mix of both,
causing corrupted characters. Similar to the linux fix in commit
6d3d09e232 (linux: don't override HOSTCC for kconfig), except that we
pass the linker flags in HOSTLDFLAGS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tornado got a requirement on the SSL module in version 5.0.2
which is also checked in the setup.py script before installing.
Since the check in buildroot runs against the host-python which
is built without SSL support, these checks fail.
Adding OpenSSL support to host-python does not make sense since the
Python on the target will be a different one. Instead, remove the
checks (which, according to the source code comments essentially check
for Python >= 2.7.9 / Python3 >= 3.4 which is true for current
Buildroot) and select the SSL option of Python/Python3 when Tornado is
selected.
Signed-off-by: Jan Dohl <polygon@wh2.tu-dresden.de>
[Thomas: adjust commit title, convert patch to a Git formatted one.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Since version 5.5, daemon is licensed under MIT:
889e5e6bd5
- Plugins are licensed under MIT, GPL-2.0 or LGPL-2.1
- Add libltdl/COPYING.LIB to license files to have a copy of LGPL-2.1 as
it is not in COPYING
- Add hash for both license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
davfs2 is a Linux file system driver that allows to
mount a WebDAV resource. WebDAV is an extension to HTTP/1.1
that allows remote collaborative authoring of Web resources.
[Peter: Add patch to drop -fstack-protector-strong and update dependencies,
Not available on musl and nommu, fixup .hash file comments,
Fix _SITE and drop autoreconf, update DEVELOPERS]
Signed-off-by: Roman Gorbenkov <roman.gorbenkov@ens2m.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As for strace [1], when <sys/reg.h> is included after <linux/ptrace.h>,
the build fails on m68k with the following diagnostics:
In file included from ./../nat/linux-ptrace.h:28:0,
from linux-low.h:27,
from linux-m68k-low.c:20:
[...]/usr/include/sys/reg.h:26:3: error: expected identifier before numeric constant
PT_D1 = 0,
^
[...]usr/include/sys/reg.h:26:3: error: expected « } » before numeric constant
[...]usr/include/sys/reg.h:26:3: error: expected unqualified-id before numeric constant
In file included from linux-m68k-low.c:27:0:
[...]usr/include/sys/reg.h:99:1: error: expected declaration before « } » token
};
^
Fix this by moving <sys/reg.h> on top of "linux-low.h".
Fixes:
https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006385
[1] 6ebf6c4f9e
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The local 16-bit byte swap implementation that was introduced in commit
b05f8f4396 (imx-usb-loader: fix build with older gcc) is not robust
enough. It suffers from double evaluation, and operators precedence
breakage. Use a better implementation suggested by Arnout Vandecappelle.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 19448f40a0 (gnutls: use included unistring unless libunistring is
selected) made libunistring an optional dependency. So now gnutls no longer
depend on wchar.
Drop wchar dependency of libmicrohttpd and libsoup, which are gnutls
reverse dependencies that do not depend themselves on wchar.
Update the comments in libsoup and taskd; the wchar dependency is now
not due to gnutls.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contains a fix for a crash when forwarding packets from devices that use
flow offloading and a x86 FPU issue on -rt kernels.
Also add a post-release upstream patch fixing a compilation issue related to
memcpy().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
../src/dbinc/atomic.h:179:19: error: definition of 'int __atomic_compare_exchange(db_atomic_t*,
atomic_value_t, atomic_value_t)' ambiguates built-in declaration 'bool
__atomic_compare_exchange(unsigned int, volatile void*, void*, void*, int, int)'
static inline int __atomic_compare_exchange(
^~~~~~~~~~~~~~~~~~~~~~~~~
To reproduce the build error use this defconfig
BR2_GCC_VERSION_8_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_BERKELEYDB=y
BR2_PACKAGE_BERKELEYDB_COMPAT185=y
BR2_PACKAGE_BERKELEYDB_TOOLS=y
Please note that to trigger the error BR2_TOOLCHAIN_BUILDROOT_CXX=y
is needed although berkeleydb does not depend on c++.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.05 and kernel to 4.17.2 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8.1 for xtensa miscompiles uClibc dynamic linker due to gcc PR
target/65416. The build completes successfully, but the binary is
non-functional because the following fragment in the _dl_get_ready_to_run
in ld-uClibc.so overwrites register spill area on stack causing register
corruption in the previous call frame and a subsequent crash:
419f: f0c1b2 addi a11, a1, -16
41a2: 1ba9 s32i.n a10, a11, 4
41a4: 0bc9 s32i.n a12, a11, 0
41a6: 5127f2 l32i a15, a7, 0x144
41a9: 1765b2 s32i a11, a5, 92
41ac: 4e2782 l32i a8, a7, 0x138
41af: 146af2 s32i a15, a10, 80
41b2: 001b10 movsp a1, a11
The crash terminates the init process and causes kernel panic.
The fix prevents reordering of movsp opcode and any access to the stack
frame memory and is applicable to all existing gcc versions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add my entry to json-c, libsoup, libsoxr, libxslt and tinymembench
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some architectures, atomic binutils are provided by the libatomic
library from gcc. Linking with libatomic is therefore necessary,
otherwise the build fails with:
sparc-buildroot-linux-uclibc/sysroot/lib/libatomic.so.1: error adding symbols: DSO missing from command line
This is often for example the case on sparcv8 32 bit.
Fixes:
http://autobuild.buildroot.net/results/fd6bee70ff20bee9607a9f6f557a3a793d00cd9f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use LIBS instead of LDFLAGS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit b54c5464cc (ti-sgx-km: rename options to have proper prefix)
forgot to add defaults from legacy options, and notices in
Config.in.legacy that legacy options are still referenced in the
package itself.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we install flake8 and its dependencies via pip. We
tried to be reproducible by pinning the version of those python
packages, but we did forget quite a few of them, and thus some
dependencies for flake8 are installed as uncontrolled versions.
Furthermore, before we install flake8 and its dependencies, we
forcibly update pip, setuptools, and wheels packages to their
latest versions. This explicitly breaks reproducibility.
While we could enforce a specific version of all those packages
and still grab them from PyPI, we can simply grab them from the
distribution-provided packages instead.
Since we're using a pinned version of stretch, this already
guarantees we'll reproducibly get the same versions over and
over again. Besides, we just need to list flake8 as a package to
install to automatically get all its dependencies (again, in a
reproducible way).
This has the slight unfortunate drawback of downgrading flake8
to version 3.2.1, from version 3.5.0, as well as downgrading a
few of flake8's dependencies, as noticed by Ricardo:
http://lists.busybox.net/pipermail/buildroot/2018-May/222376.html
However, as Ricardo said, there isn't "any serious limitation of
this old version, the release notes for a version in the between
mentions 'Dramatically improve the performance' but we have a
limited number of scripts and running on Gitlab for all of them
still takes less than 5 minutes".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
shadowsocks-libev needs thread support, otherwise the configure script
fails with:
configure: error: Can not find pthreads. This is required.
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit f8d4439477
("shadowsocks-libev: new package"), when this package was introduced,
the hash for a license file that isn't available in upstream's tarball
was added to the license file. Obviously, this hash serves no purpose,
so drop it.
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Same as imx-gpu-viv, no changelog was provided by NXP.
Tested with the following commands:
# /usr/share/examples/g2d_samples/g2d_multiblit_test
# /usr/share/examples/g2d_samples/g2d_overlay_test
# /usr/share/examples/g2d_samples/g2d_test
# gst-launch-1.0 videotestsrc ! imxg2dvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basically enabling the package for aarch64. One difference with 32-bit
i.MX platforms resides in the fact that Wayland is the only back-end
supported. Therefore X11 and Framebuffer options are masked.
This was tested on i.MX8MQ Nitrogen8M platform (with weston-imx):
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: drop BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU_WAYLAND_ONLY and
use BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M directly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No changelog was provided by NXP but we can assume it's the latest and
therefore the greatest.
What is known, is that that same version worked both ARM and ARM64.
The support for the latter will be added in a follow-up patch.
This package has been tested with X11, Framebuffer and Wayland
back-ends:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
# gmem_info
... display memory use per PID ...
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Both plugins `geometryloaders' and `renderplugins' are available since
Qt 5.9.
Fixes:
>>> qt53d 5.6.3 Installing to target
cp -dpf /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libQt53D*.so.*
/home/gportay/src/buildroot/output/target/usr/lib
cp -dpfr /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/qt/plugins/geometryloaders
/home/gportay/src/buildroot/output/target/usr/lib/qt/plugins
cp: cannot stat '/home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/qt/plugins/geometryloaders': No such file or directory
package/pkg-generic.mk:310: recipe for target '/home/gportay/src/buildroot/output/build/qt53d-5.6.3/.stamp_target_installed' failed
make[2]: *** [/home/gportay/src/buildroot/output/build/qt53d-5.6.3/.stamp_target_installed] Error 1
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Gaël PORTAY <<a href="mailto:gael.portay@savoirfairelinux.com" target="_blank" rel="noreferrer">gael.portay@savoirfairelinux.com</a>><br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds WTF platform support for the 32-bits armv8-a architectures.
Fixes:
In file included from ../3rdparty/javascriptcore/JavaScriptCore/config.h:26,
from ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:44:
../3rdparty/javascriptcore/JavaScriptCore/wtf/Platform.h:370:6: error: #error "Not supported ARM architecture"
# error "Not supported ARM architecture"
^~~~~
The patch is based on two upstream fixes in WebKit[1][2].
See also commit cea7aa873a.
[1]: 313d9fc4bd
[2]: 98f0de0709
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `sensors' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `serialport' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `serialbus' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `svg' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `wayland' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `script' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `quickcontrols' from the staging
directory to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `location' and `positioning' from the
staging directory to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `canvas3d' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the included copy of libunistring unless BR2_PACKAGE_LIBUNISTRING
is already selected.
The resulting gnutls library with libunistring included is about 1.2 MB
smaller than the sum of libgnutls and libunistring.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- (CVE-2018-7167): Fixes Denial of Service vulnerability where calling
Buffer.fill() could hang
- (CVE-2018-7161): Fixes Denial of Service vulnerability by updating the
http2 implementation to not crash under certain circumstances during
cleanup
- (CVE-2018-1000168): Fixes Denial of Service vulnerability by upgrading
nghttp2 to 1.32.0
See https://nodejs.org/en/blog/release/v8.11.3/ for more details
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting speex release notes from https://www.speex.org
"Speex 1.2rc2 and SpeexDSP 1.2rc2 are out
December 6, 2014
This release splits the speex codec library and the speex DSP library
into separate source trees."
After bumping speex to 1.2.0 DSP support is provided by speexdsp.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting speex release notes from https://www.speex.org
"Speex 1.2rc2 and SpeexDSP 1.2rc2 are out
December 6, 2014
This release splits the speex codec library and the speex DSP library
into separate source trees."
After bumping speex to 1.2.0 this new package is necessary to provide
speex-based DSP support for packages like Freeswitch and Asterisk.
We use current git HEAD which received 21 commits since the 1.2rc3
tarball was released in 2015, including a fix for building on arm.
We still need another patch which was not committed to git master to
fix building on aarch64.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9ff035839eef68eb16e90ae70c3e70dc7f57ca5e ("librtlsdr: fix
static build") introduced this obvious typo, which was spotted by
check-package:
package/librtlsdr/librtlsdr.mk:18: possible typo: LIBRTLSDRCONF_OPTS -> *LIBRTLSDR*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages don't provide source archive but only a wheel file. In
this case download variable is not defined. So define this variable at
the very beginning and check whether it is None after searching for
source archives in the metadata.
Bonus: fix PEP8 issue with wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
================================================================================
Redis 3.2.12 Released Wed Jun 13 12:43:01 CEST 2018
================================================================================
Upgrade urgency CRITICAL:
* Multilple security issues fixed.
* Backport of an older AOF fsync=always fix. Check 4.x release notes.
* Backport of a *SCAN bug. Sometimes elements could be missing from the scan.
* Other minor things.
https://raw.githubusercontent.com/antirez/redis/3.2/00-RELEASENOTES
For more details about the lua related security issues, see the blog:
http://antirez.com/news/119
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a locally computed hash for the license file to track possible
updates.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-10360: The do_core_note function in readelf.c in
libmagic.a in file 5.33 allows remote attackers to cause a denial of
service (out-of-bounds read and application crash) via a crafted ELF
file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit bd03966d4e ("toolchain: GCC
bug 85862"), a dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_85862 was added
to the qt5webengine package, but it should have been a dependency on
!BR2_TOOLCHAIN_HAS_GCC_BUG_85862. This commit fixes that.
Signed-off-by: David Barbion <david.barbion@ext.leroymerlin.fr>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-12015 - In Perl through 5.26.2, the Archive::Tar module
allows remote attackers to bypass a directory-traversal protection
mechanism, and overwrite arbitrary files, via an archive file containing a
symlink and a regular file with the same name.
Patch from
ae65651eab
with path rewritten to match perl tarball.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch applied upstream, added all upstream and license hashes.
Removed _AUTORECONF, configure and configure.ac in the tarball match,
also removed _INSTALL_TARGET_CMDS, the upstream install target works
just fine nowadays.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There're known issues with building glibc for ARC with vanilla
Binutils 2.30. Adding a couple of not yet upstreamed patches that
solve it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[Thomas: remove numbering in patch titles, renumber patch file names.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added license hashes, added optional dependency to libseccomp provided
by upstream in this version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As noted in the sourceforge page, the project is not using sourceforge
anymore. Use the gitweb summary page instead.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply modifications made in recent commits:
- 456ea9871e busybox: add /dev/std{in, out, err} symlinks to inittab
- 13dbe73782 busybox: reduce number of mkdir calls in inittab
- 8a89d290d4 busybox: add an inittab entry to activate swap
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is a call to swapoff in the shutdown sequence, so call "swapon -a"
on startup. As stated in the swapon man page,
All devices marked as "swap" in /etc/fstab are made available, except
for those with the "noauto" option. Devices that are already being
used as swap are silently skipped.
So even if the system has some init script to start/stop swap (e.g. from
a rootfs ovelay) calling swapon/swapoff would be harmless.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is a call to swapoff in the shutdown sequence, so call "swapon -a"
on startup. As stated in the swapon man page,
All devices marked as "swap" in /etc/fstab are made available, except
for those with the "noauto" option. Devices that are already being
used as swap are silently skipped.
So even if the system has some init script to start/stop swap (e.g. from
a rootfs ovelay) calling swapon/swapoff would be harmless.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default sysvinit inittab does two separate mkdir calls to create
/dev/pts and /dev/shm. Reduce this to call mkdir only once for both
directories.
This removes id "si3" but keeps ids "si4".."si9" intact rather than
renumbering them. This would just increase the turmoil without any
practical effect.
Based on commit e9db8122fb, by Florian La Roche <F.LaRoche@pilz.de>.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to modem manager 1.8.0 which does not require udev.
Added option to build without udev but if udev exists in
the build, it build with libgudev.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.17 brings support for HDMI out, but sunxi_defconfig hasn't been updated to
enable the drivers - So add a kernel fragment to enable them.
Likewise, analog audio has been supported since 4.10, but the driver isn't
enabled in sunxi_defconfig, so enable it in the fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
triggerhappy uses pkg-config to detect the systemd library. Make sure it
uses the target pkg-config, not the host one.
Fixes build failure when the host has systemd pkg-config files:
.../host/bin/arm-linux-gcc -static th-cmd.o cmdsocket.o -lsystemd -o th-cmd
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find -lsystemd
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-12020: Unsanitized file names might cause injection of
terminal control characters into the status output of gnupg.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-12020: Unsanitized file names might cause injection of
terminal control characters into the status output of gnupg.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual is GPL-2, and points to the COPYING file in the repository.
When we do a rendering of the manual for a specific version, that URL
is currently always poitning to the latest version of the COPYING file.
If we ever have to change the content of that file (e.g. to add a new
exception, more clarifications, a license change, or whatever), then
an old manual would point to that newer version, which would then be
incorrect.
Include the sha1 of the commit in the URL, so that the manual always
point to the tree at the time the manual was rendered, not the time
it is consulted. Contrary to the informative text above, use the full
sha1, not the shortened one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add a dependency to host-cargo
- Add a patch to set RUST_TARGET
- Add a dependency to BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS
- Forward this dependency to efl svg, enlightment, gst-plugins-bad and
gst1-plugins-bad
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: propagate the new dependency to the gst-plugins-bad and
gst1-plugins-bad Config.in comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit drops the option BR2_PACKAGE_HAS_HOST_RUSTC, which is no
longer used following commit bd425f716f
("host-cargo: select host-rustc").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot documentation specifies that cargo-based package should only
depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS and selects
BR2_PACKAGE_HOST_CARGO but this fails with the following error:
warning: (BR2_PACKAGE_LIBRSVG) selects BR2_PACKAGE_HOST_CARGO which has
unmet direct dependencies (BR2_PACKAGE_HAS_HOST_RUSTC)
Indeed, host-cargo depends on
BR2_PACKAGE_HAS_HOST_RUSTC which is selected only when host-rustc is
selected.
So instead of having to select both cargo and rustc in each cargo-based
package, replace BR2_PACKAGE_HAS_HOST_RUSTC dependency by
BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS and select
BR2_PACKAGE_HOST_RUSTC
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix three issues with code style in our test infra:
- 'print' is now a function,
- exceptions need to be caught-assigned with the 'as' keyword,
- old-style "%s"%() formatting is deprecated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: drop indices in format strings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original ftp with source code is not reachable any more and this
commit changes the location of the package to corresponding GitHub
project.
Signed-off-by: Mikhail Karpenko <karpenko@fastmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-7225 - An issue was discovered in LibVNCServer through
0.9.11. rfbProcessClientNormalMessage() in rfbserver.c does not sanitize
msg.cct.length, leading to access to uninitialized and potentially sensitive
data or possibly unspecified other impact (e.g., an integer overflow) via
specially crafted VNC packets.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes: https://mariadb.com/kb/en/mariadb-10133-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10133-changelog/
Fixes the following security vulnerabilities:
CVE-2018-2782 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows low
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-2784 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows low
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-2787 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server as well as unauthorized update, insert or
delete access to some of MySQL Server accessible data.
CVE-2018-2766 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-2755 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Replication). Supported versions that are affected
are 5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Difficult to
exploit vulnerability allows unauthenticated attacker with logon to the
infrastructure where MySQL Server executes to compromise MySQL Server.
Successful attacks require human interaction from a person other than the
attacker and while the vulnerability is in MySQL Server, attacks may
significantly impact additional products. Successful attacks of this
vulnerability can result in takeover of MySQL Server.
CVE-2018-2819 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.5.59 and
prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2817 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2761 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Difficult to
exploit vulnerability allows unauthenticated attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2781 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows high privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2771 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Locking). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Difficult to
exploit vulnerability allows high privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2813 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized read access to a subset of MySQL
Server accessible data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.17 and U-Boot to 2018.05.
As the dtb file has been renamed in mainline, make the necessary
adjustments in U-Boot environment and also in
BR2_LINUX_KERNEL_INTREE_DTS_NAME.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.17 and U-Boot to 2018.05.
As the imx_v6_v7_defconfig in 4.17 already selects the
CONFIG_CFG80211_WEXT option, the linux.fragment can
be simply removed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use LICENSE instead of main.c in TINYMEMBENCH_LICENSE_FILES
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bumps the cryptodev-linux package to the latest version available, which
contains some fixes and allows to use cryptodev-linux with a recent
kernel (v4.17).
The patch bumps the version and update the locally calculated hash.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the po/ disable patch; not needed anymore.
Drop the __mempcpy compatibility patch; __mempcpy is not used anymore.
Refresh the -Werror removal patch; still needed, unfortunately.
Renumber the remaining patches.
Add GPLv3 license file.
Add license files hash.
[Peter: drop security reference, was added post-release]
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2017-5029
- Remove first patch (already in version)
- Add a dependency to host-pkgconf and remove libxml2 options: see
abf537ebb2
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Executing "/etc/init.d/S29netplug start" multiple times resulted in
multiple instances of netplugd.
Pass "-p /var/run/netplug.pid" to netplugd, so it creates the PID file
that start-stop-daemon needs to know that netplugd is already running.
Also use the pid file to stop netplugd, instead of the daemon name.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10661
Reported-by: Joachim Krueger <mail2k@web.de>
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I'm working on improving the sysvinit scripts, so it's advisable to keep
an eye on them.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prior to commit 2dccb4f2fe
("package/docker-containerd: convert to golang infrastructure"), the
containerd binary was installed as docker-containerd. Following the
conversion to the golang package infrastructure, the binary is now
installed as "containerd", which breaks some use cases.
Let's add a symlink link docker-containerd -> containerd to fix such
use cases.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11076
Signed-off-by: Sam Lancia <sam@gpsm.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a minor release the main feature of which are the
object-oriented bindings for C++ and Python3. Other than that there's
a couple bug-fixes and minor improvements all around.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patches.
Add a patch fixing build with musl libc.
Update the list of licenses based on the content of COPYING. The
BSD-5-Clause license is not listed by SPDX, but that is its name in the
COPYING file.
Update the license file hash: new licenses, dates update, reformat.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add mender, an open source over-the-air (OTA) software
updater for embedded Linux devices.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- add entry to DEVELOPERS file.
- drop dependency on systemd, since there is really no build
dependency, it's just that the init script integration is missing.
- add Config.in comment about the thread dependency
- don't override install commands, otherwise the mender binary is not
installed, and instead use a post install target hook.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds flatcc as a new package, pulling v0.5.1 from github. flatcc
has both a host tool (the compiler), and libraries for the target.
Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com>
Signed-off-by: Joel Carlson <joel.carlson@cosmicaes.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The PAGER environment variable is including a blank character at the
end. Remove this.
A for loop has been unsetting the variable inside the loop, this is only
needed once at the end of the loop.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default busybox inittab does two separate mkdir calls
to create /dev/pts and /dev/shm. Reduce this to call mkdir
only once for both directories.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In busybox fix the S01logging usage text to
document the "reload" target.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump linux as well headers to v4.16 version, this eventually drop the
wifi patch since it has been merged to Linux v4.16.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When bumping Mono to 5.12.0.226 in commit
80821d3ed8, the license files variable
was not updated to take into account that "eglib" is no longer part of
Mono, and therefore eglib/COPYING doesn't exist anymore. This commit
therefore fixes the license files variable following this change.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are working to make all sysvinit scripts conformant to a pattern and
/etc/default/ seems to be a good choice, since 34 packages already get
optional configurations from files at that directory.
netplug still installs an init script at /etc/rc.d/init.d/. This will
be fixed in a future patch that will refactor the init scripts.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package recipe uses a post-install hook to remove useless files from
$(TARGET_DIR)/etc/rc.d/init.d and $(TARGET_DIR)/etc/sysconfig. This may
damage packages that install useful files on those directories (such as
netplug, which installs $(TARGET_DIR)/etc/rc.d/init.d/netplugd).
In the future[1] we will reorganize the init scripts and possibly get
rid of /etc/rc.d and /etc/sysconfig but for the moment let's restrict
the file removal to those installed by audit.
1. http://lists.busybox.net/pipermail/buildroot/2018-May/221549.html
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes a security vulnerability similar to git's CVE-2018-11235
This release changes some configuration options, so tweak them
accordingly.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgit2 depends on zlib. If libgit2's build system does not find a
system zlib, then it compiles a bundled version of it, which is not
really great. So instead, add zlib as a mandatory dependency.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
embedded devices and low-end boxes.
https://github.com/shadowsocks/shadowsocks-libev
Signed-off-by: Min Xu <xuminready@gmail.com>
[Thomas:
- drop patch adding license file for libipset
- drop --disable-documentation, it's passed by autotools-package
- add entry in DEVELOPERS file
- pass --disable-ssp because the SSP check uses AC_COMPILE_IFELSE()
so with some toolchains, it think SSP support is available, while
it's not. And anyway we want SSP to be controlled by Buildroot
global options, not on a per-package basis.
- add depends on BR2_USE_MMU, because the code uses fork().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
'+' is a valid character in a url. The current dl-wrapper gets the
URI scheme by dropping everything after the last '+' character, with
the intension of finding 'git' from e.g. 'git+https://uri'.
If a uri has a '+' anywhere in it, it ends up using too much of the
string as a scheme, and fails to match the handler properly.
An example of where this form of URI is used is when using deploy tokens
in gitlab. It uses a form like https://<username>:<password>@gitlab.com/<group>/<repo.git>
where username for deploy token is of the form 'gitlab+deploy-token-<number>'.
Use the %% operator to search backwards until the last '+' character when
dropping the rest of the string as we know that the first '+'
in the string should be the scheme.
Signed-off-by: Robert Beckett <bbeckett@netvu.org.uk>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove all patches (already in version)
- Since version 0.18 (2016-12-07), there is no
'LibRaw Software License 27032010' licensing anymore (and all signed
agreements have expired). LibRaw is now dual-licensed: LGPL 2.1 or
CDDL 1.0
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 7517aef4d (support/docker: limit the number of layers),
we reduced the number of layers by coalescing multiple RUN commands
into less commands.
In doing so, we especially coalesced "apt-get update" with "apt-get
install".
However, the distribution we used is a pinned version of stretch, so
we know that running apt-get update will always yield the same apt
database.
If we split the two apt-get commands, then we can re-use any local
intermediate image when we need to update the list of packages to
install; this helps quite a bit when testing the docker files over
and over again, with just slight variants in the packages list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github
- Move to autotools infrastructure
- Remove patch (not needed anymore)
- Since version 1.4 (January 2016), license is now LGPL-2.1+
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All linux configs are renamed to a version neutral filename
to avoid further renaming on kernel bumps.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.16.7 2.12.0 YES OK
arm_versatile 4.16.7 2.12.0 YES OK
arm_versatile_nommu 4.16.7 2.12.0 YES OK (3)
arm_vexpress 4.16.7 2.12.0 YES OK
m68k_mcf5208 4.16.7 2.12.0 YES OK
m68k_q800 4.16.7 q800-v2.11.0 NO (2) OK
microblazebe 4.16.7 2.12.0 YES OK
microblazeel 4.16.7 2.12.0 YES OK
mips32r2el_malta 4.16.7 2.12.0 YES OK
mips32r2_malta 4.16.7 2.12.0 YES OK
mips32r6el_malta 4.16.7 2.12.0 YES OK
mips32r6_malta 4.16.7 2.12.0 YES OK
mips64el_malta 4.16.7 2.12.0 YES OK
mips64_malta 4.16.7 2.12.0 YES OK
mips64r6el_malta 4.16.7 2.12.0 YES OK
mips64r6_malta 4.16.7 2.12.0 YES OK
nios2-10m50 4.16.7 2.12.0 NO OK
or1k 4.16.7 2.12.0 NO OK
ppc_g3beige 4.16.7 2.12.0 YES OK
ppc_mpc8544ds 4.16.7 2.12.0 YES OK
ppc_virtex_ml507 4.16.7 2.12.0 NO OK
ppc64_pseries 4.16.7 2.12.0 YES OK
ppc64le_pseries 4.16.7 2.12.0 YES OK
ppc64_e5500 4.16.7 2.12.0 YES OK
sh4 4.16.7 2.12.0 YES OK
sh4eb 4.16.7 2.12.0 NO (1) OK
sparc_ss10 4.16.7 2.12.0 YES OK
sparc64_sun4u 4.16.7 2.12.0 YES OK
x86 4.16.7 2.12.0 YES OK
x86_64 4.16.7 2.12.0 YES OK
xtensa_lx60 4.16.7 2.12.0 YES OK
xtensa_lx60_nommu 4.16.7 2.12.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel patch required, switched to devicetree usage
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This issue only applies to kernels built with CONFIG_THUMB2=y, so reword the
comment to make that more clear.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f13477b (linux: config.in: add comment for Arm Cortex-M) added a
comment so that the user that the linux kernel may miscompile with
binutils 2.29+, when the target is an armv7m CPU.
However, the real trigger is a compilation in thumb2 mode, which happens
to be the only option for armv7m CPUs.
We can't know whether the kernel will be built in arm or thumb2 mode,
though, because we do not have that information: it is only available in
the Linux' .config file, which we don;t have access to at the time we
run our menuconfig.
So, relax the conditions under which the comment is made, so that it
appears as soon as binutils are >= 2.29 (i.e. not 2.28, which is the
oldest we support) for ARM CPUs.
[Peter: reword comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Laurent GONZALEZ <br22@gezedo.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 17f352ac (package/binutils: default to 2.29 for Cortex-M targets)
made the default version 2.28 (and not 2.29!) when the target is an
arm-v7m CPU.
However, the real trigger is compilation in Thumb mode, not the fact
that the target is v7m.
The fact that it was noticed on a v7m target is because Thumb is the
only mode valid on those CPUs.
Tighten the defaults to 2.28 for Thumb and Thumb2 modes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Laurent GONZALEZ <br22@gezedo.com>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following error when trying to execute clang compiler
(host-variant):
CommandLine Error: Option 'x86-use-base-pointer' registered more than once!
LLVM ERROR: inconsistency in registered CommandLine options
The same happens for the other binaries, such as clang-format:
./clang-format
: CommandLine Error: Option 'help-list' registered more than once!
LLVM ERROR: inconsistency in registered CommandLine options
Clang binaries are tools, and given that DLLVM_LINK_LLVM_DYLIB is set,
they are linked against libLLVM.so. The problem is that binaries are
also linking against some LLVM static libraries, resulting in the error
shown above. However, it is not the same case for libclang, which is also
a tool but links only against libLLVM.so.
To fix this problem, add LLVM_DYLIB_COMPONENTS=all.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since all cyclone5 development changes are upstream, change over to an
upstream release of the Linux kernel and u-boot for buildroot.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ef94c736ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 12049cc8b8.
Now that the binutils default has been changed for ARMv7M, this is no longer
needed.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit cbe43fd417.
Now that the binutils default has been changed for ARMv7M, this is no longer
needed.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils 2.29 changed the implementation of adr pseudo instruction
it breaks linux kernel and impacts Cortex-M targets (eg. stm32)
[Peter: simplify Config.in logic, adjust message to make it clear this is
just a default]
Signed-off-by: Laurent GONZALEZ <br22@gezedo.com>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 4.10.1 version brings a large number of fixes:
https://www.xenproject.org/downloads/xen-archives/xen-project-410-series/xen-4101.html
Including a number of security fixes:
XSA-252: DoS via non-preemptable L3/L4 pagetable freeing (CVE-2018-7540)
XSA-253: x86: memory leak with MSR emulation (CVE-2018-5244)
XSA-254: Information leak via side effects of speculative execution
(CVE-2017-5753 CVE-2017-5715 CVE-2017-5754)
XSA-255: grant table v2 -> v1 transition may crash Xen (CVE-2018-7541)
XSA-256: x86 PVH guest without LAPIC may DoS the host (CVE-2018-7542)
XSA-258: Information leak via crafted user-supplied CDROM (CVE-2018-10472)
XSA-259: x86: PV guest may crash Xen with XPTI (CVE-2018-10471)
Also add a hash for the license file while we are at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Re-add BR2_TOOLCHAIN_HAS_SSP since the toolchain support SSP.
Tested with qemu_nios2_10m50_defconfig and Qemu 2.10.1-3.fc27 release.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update documentation about adding meson-based packages with instructions for
using pkg-meson infrastructure.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a new infrastructure to ease the development of packages that use Meson as
their build system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- move global variables definition outside of the inner-meson-package
macro
- for consistency, remove double quote around value passed to meson
in the host configure step.
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if gcc 6 is still maintained for some time (gcc 6.5 is pending),
switch to gcc 7.x since it has been released since 2017-05-02 and
gcc 8.x is available since 2018-05-02.
We have been having toolchains in the autobuilders with gcc
7.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0860-cilk-fix-build-without-wchar.patch since cilk has
been removed from gcc.
Rebase 0900-remove-selftests.patch on gcc 8.1.0
Remove upstream patches 0001-m68k-coldfire-pr68467.patch and
0892-microblaze-Revert.patch.
Use bz2 release tarball only for gcc 4.9 since all other version
now use xz tarball.
Runtime tested on x86_64 with binutils 2.30, gcc 8.1.0,
kernel headers 4.14 and glibc 2.27.
Buildtime tested with glibc with all supported architectures.
Buildtime tested on x86_64 with musl and uClibc-ng
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove patch (already in version)
- Add three patches (first one sent and merged upstream, second and
third patchs retrieved upstream)
- Move to autotools-package
- Remove workaround for static handling of pthread as it isn't needed
anymore
- Remove deactivation of libnl in static build as it isn't needed
anymore
- Set libnl and zlib dependencies as optional and not mandatory
- Add duma and libgcrypt optional dependencies
- Update workaround for static handling of libpcap
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps mono to version 5.12.0.226 and it's monolite dependency
to version 1051200002, doing so it removes also a couple of upstreamed
patches.
This new mono version requires also a different option for
managing aot, so this patch refactors also the configure options.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Forward port of security fixes from the 2.13.7 release. The 2.13.7
release notes say this:
* Submodule "names" come from the untrusted .gitmodules file, but we
blindly append them to $GIT_DIR/modules to create our on-disk repo
paths. This means you can do bad things by putting "../" into the
name. We now enforce some rules for submodule names which will cause
Git to ignore these malicious names (CVE-2018-11235).
Credit for finding this vulnerability and the proof of concept from
which the test script was adapted goes to Etienne Stalmans.
* It was possible to trick the code that sanity-checks paths on NTFS
into reading random piece of memory (CVE-2018-11233).
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
usbutils version 010 converted the lsusb.py script to Python 3. Keep the
lsusb.py script on target only when Python 3.x is enabled.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add GPL-3.0 license for the lsusb.py script.
Update license file location.
The tar archive does not contain the license files from the git tree.
Add a patch adding the license files. This patch is not git formatted
because it only applies to the tar archive.
Upstream fixed tar archive generation for the next release.
Add license files hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed issues are listed in the 2.27 branch NEWS file:
CVE-2017-18269: An SSE2-based memmove implementation for the i386
architecture could corrupt memory. Reported by Max Horn.
CVE-2018-11236: Very long pathname arguments to realpath function could
result in an integer overflow and buffer overflow. Reported by Alexey
Izbyshev.
CVE-2018-11237: The mempcpy implementation for the Intel Xeon Phi
architecture could write beyond the target buffer, resulting in a buffer
overflow. Reported by Andreas Schwab.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Corkscrew is a tool for tunneling SSH through HTTP proxies
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas: add hash for license file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The path to the binary images is very long. Since we are about to make
a larger use of it, let's use a variable to make it somewhat shorter.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit f9cffb6af4 (binutils: replace hard-links with soft-links to fix
rpath) has a side effect that when we build for a noMMU target, elf2flt
will in turn replace some of the programs installed by binutils, with
its own wrappers.
For example, it will rename host/TUPLE/bin/ld to ld.real, and add its
own wrapper in place of the original. It does the same for
host/bin/TUPLE-ld and host/bin/TUPLE-ld.real.
However, we had already made ld a symlink to ../../bin/TUPLE-ld, so
host/TUPLE/bin/ld.real will still point to host/bin/TUPLE-ld when we
want it to point to ld.real instead...
This ultimately confuses gcc later on.
Of course, the culprit is also elf2flt, which also installs similar
hardlinks that would ultimately exhibit the same rpath issue as the
one fixed by f9cffb6af4. Note: we haven't had an issue so far with
that, because those tools installed by elf2flt only link with libz,
which is most often present on the host system. So, all seem well,
but is nonetheless broken; this will be fixed in a subsequent commit.
But back on topic. If we were to fix elf2flt with similar symlinks,
gcc still gets confused. The underlying reason for this confusion is
not entirely clear, though... It looks like something is trying to
dereference symlinks and gets confused by the result somehow...
So, in an attempt to restore some sanity in all this mess, we try to
restore the previous behaviour, we no longer use symlinks but just copy
the individual tools.
Fixes: #11031.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since all cyclone5 development changes are upstream, change over to an
upstream release of the Linux kernel and u-boot for buildroot.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With CHRONY_ARGS in /etc/default/chrony, chrony may asked to use an
alternative configuration file (with the -f option), so drop the explicit
/etc/chrony.conf check.
In case the configuration file isn't present chrony will anyway loudly
complain which is preferable to this silent failure:
chronyd -f /non/existing/file.conf
Could not open configuration file /non/existing/file.conf : No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.03-rc2, which
includes significant changes since arc-2018.03-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7aaabe8fc0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#11046
Commit bb2a57a17a (fs: run packages' filesystem hooks in a copy of target/)
changed the file system logic to run file system hooks from packages on a
copy of TARGET_DIR, and finally use this copy as input for the file system
generation.
This copy was done with rsync, which by default does not preserve hard
links, leading to an expansion of the file system images when hard links are
present.
Fix it by passing the -H option to rsync (preserve hard links).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssh2 pkg-config file could contain the following lines when build
with a static version of mbedtls:
Libs: -L${libdir} -lssh2 /xxx/libmbedcrypto.a
Libs.private: /xxx/libmbedcrypto.a
This static mbedtls library must be used to correctly detect ssh2
support and this library must be copied in libcurl.pc otherwise
compilation of any application (such as upmpdcli) with libcurl will fail
when trying to find mbedtls functions included in libssh2.
So, replace pkg-config --libs-only-l by pkg-config --libs.
Fixes:
- http://autobuild.buildroot.net/results/43e24b22a77f616d6198c10435dcc23cc3b9088a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the patch adding local rpcgen. Instead use the host-nfs-utils
provided rpcgen. Update the patch "Automatically generate XDR header
files from .x sources using" to use external rpcgen.
Renumber the other patches.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We only need the host package for the rpcgen utility. glibc deprecated
this utility in version 2.26. Fedora has recently removed rpcgen from
its glibc package. So we need to build the rpcgen from the nfs-utils
package.
The removal of Sun RPC from glibc also removed RPC headers from glibc.
rpcgen needs two of these headers. Add host-libtirpc to provide the RPC
headers.
Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libtirpc host package is only for two headers that the host rpcgen
utility from the nfs-utils package needs to build. glibc used to provide
these headers. In version 2.26 glibc deprecated them with its bundled
Sun RPC. Recently Fedora stopped enabling Sun RPC in glibc. So we can no
longer rely on these headers being present on the host.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
RK3288 Vyasa board support falcon mode in U-Boot and SD layout start from
16MB offset for args and 17MB for uImage. So give full u-boot partition
space as 30M so-that it can occupy bigger uImage file and doesn't overlap
rootfs partition.
[Peter: use # as comment character, clarify comment wording]
Reported-by: Shyam Saini <shyam@amarulasolutions.com>
Tested-by: Shyam Saini <shyam@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shyam saini <shyam@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Resolves build failures like:
http://autobuild.buildroot.net/results/953/95307f0f56c7ead1bd1f0ab0049aeb8b30fdc11c/
libunistring to libicu conversion required modifications to
0001-mdrestore-do-not-do-dynamic-linking-of-libtool-libra.patch and
the libicu usage doesn't require the
0005-xfs_scrub-fix-cross-compile-with-libunistring.patch patch. I
verified that the configuration time setup of the LIBICU library
works correctly and doesn't require us to remove it.
Upstream has reworked/included the following:
0003-workqueue-add-missing-pthreads-header.patch
0004-xfs_scrub-add-missing-paths-header.patch
0006-xfs_scrub-fix-build-with-older-kernel-headers.patch
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'local' site method is easily confused with the 'file' site method,
making people create packages like this:
FOO_SITE_METHOD = local
FOO_SOURCE = foo.tar.gz
$(eval $(generic-package))
Due to the intricacies of the generic package infra, this does not
cause an error; instead, the foo.tar.gz tarball that happens to be
present in the download directory will be used. This behaviour differs
greatly from what is specified in the manual.
Instead, error out immediately if a package specifies the 'local' site
method but does not specify a _SITE.
We check for _OVERRIDE_SRCDIR rather than checking for _SITE, just
after _OVERRIDE_SRCDIR has been set to _SITE. Indeed, a package that
sets _OVERRIDE_SRCDIR but not _SITE currently works correctly. There is
no reason to make it fail.
See also
https://stackoverflow.com/questions/50364655/including-patches-to-build-root
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.03-rc2, which
includes significant changes since arc-2018.03-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-Fix-behavior-of-recv-in-the-CLOSING-state.patch is now upstream, so
drop it.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are moving from datacom.ind.br to datacom.com.br. The old domain will
still be valid for an undefined period (probably forever).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This sets the protocol choice according to the program invocation name.
That is the common lrzsz installation practice.
Cc: Matthew Starr <mstarr@hedonline.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
This release fixes the issues listed below.
CVE-2018-1122: Local privilege escalation in top
CVE-2018-1123: Denial of service in ps
CVE-2018-1124: Local privilege escalation in libprocps
CVE-2018-1125: Stack buffer overflow in pgrep
CVE-2018-1126: Integer overflow in proc/alloc
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4ded5d6af4 ("systemd: add
optional dependency on libidn2") contained a mistake: -Dlibidn2=true
was passed even when neither libidn nor libidn2 are
available. Obviously it should be -Dlibidn2=false.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use upstream provided tarball and hash.
The tarball conf/ subdirectory contains symlinks to host automake and
libtool scripts. We can't rely on these being present or usable. Remove
the symlinks, and keep autoreconf to populate the conf/ subdirectory
using Buildroot provided autotools.
Cc: Derek Baker <Derek-Baker@idexx.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install the LTTng control library headers and shared objects
to staging.
The C interface to LTTng described here:
https://lttng.org/docs/v2.10/#doc-liblttng-ctl-lttng
requires including <lttng/lttng.h> and linking against liblttng-ctl,
but those parts are not available unless this package does a staging
install.
Signed-off-by: John Faith <jfaith@impinj.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/5d9/5d9e299ff12726d07e8a584a213c1d2a2e419594/
The modem-manager build generates a number of build warnings like:
mm-base-manager.c: In function 'handle_set_logging':
mm-base-manager.c:680:15: error: assignment from incompatible pointer type [-Werror]
ctx->self = g_object_ref (manager);
Which cause a build failure because of -Werror. Pass
--disable-more-warnings to disable -Werror.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Options should be prefixed by BR2_PACKAGE_LIBMEDIAART and not
BR2_PACKAGE_MEDIAART, but package was using both prefixes.
This was found as default symbol was defined as
BR2_PACKAGE_LIBMEDIAART_BACKEND_NONE (correct prefix), but symbol
was actually BR2_PACKAGE_MEDIAART_BACKEND_NONE).
This commit therefore renames the incorrectly named options, and adds
Config.in.legacy handling. Since the options are part of a choice, the
legacy handling cannot select the new options, and is only here to
inform the user.
Fixes: c443830a57 libmediaart: new package
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Thomas: improve commit log, add Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sub-options of the ti-sgx-km package had their name option
prefixed by BR2_PACKAGE_TI_SGX, while the prefix should be
BR2_PACKAGE_TI_SGX_KM. This commit fixes that, and adds the necessary
Config.in.legacy handling.
Since those options are part of a choice, the legacy handling cannot
select the new name of the options, so the legacy handling only
informs the user of the rename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sub-options of the janus-gateway package had their name option
prefixed by BR2_PACKAGE_JANUS, while the prefix should be
BR2_PACKAGE_JANUS_GATEWAY. This commit fixes that, and adds the
necessary Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A number of options in the ipsec-tools package had their Config.in
option prefixed by BR2_PACKAGE_IPSEC, while the prefix should be
BR2_PACKAGE_IPSEC_TOOLS. This commit fixes that, and adds the
necessary Config.in.legacy handling.
Since those options are part of a choice, the legacy handling cannot
select the new name of the options, so the legacy handling only
informs the user of the rename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option name BR2_PACKAGE_LIBTFDI_CPP obviously had a typo: it
should have been named BR2_PACKAGE_LIBFTDI_CPP, and add the necessary
Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The choice options to select the specific jquery-ui theme to install
had a prefix of BR2_PACKAGE_JQUERY_UI_THEME_ instead of
BR2_PACKAGE_JQUERY_UI_THEMES_. This commit fixes that, and adds
Config.in.legacy handling. It's worth mentioning that since those
options are part of a choice, the legacy handling cannot select the
new name of the option: we can simply inform the user about the
renaming.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bluez5_utils Config.in options had a bogus prefix:
BR2_PACKAGE_BLUEZ5 instead of the expected
BR2_PACKAGE_BLUEZ5_UTILS. This commit fixes that, and adds the
appropriate Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-10536: An issue was discovered in WavPack 5.1.0 and earlier. The
WAV parser component contains a vulnerability that allows writing to memory
because ParseRiffHeaderConfig in riff.c does not reject multiple format
chunks.
CVE-2018-10537: An issue was discovered in WavPack 5.1.0 and earlier. The
W64 parser component contains a vulnerability that allows writing to memory
because ParseWave64HeaderConfig in wave64.c does not reject multiple format
chunks.
CVE-2018-10538: An issue was discovered in WavPack 5.1.0 and earlier for WAV
input. Out-of-bounds writes can occur because ParseRiffHeaderConfig in
riff.c does not validate the sizes of unknown chunks before attempting
memory allocation, related to a lack of integer-overflow protection within a
bytes_to_copy calculation and subsequent malloc call, leading to
insufficient memory allocation.
CVE-2018-10539: An issue was discovered in WavPack 5.1.0 and earlier for
DSDiff input. Out-of-bounds writes can occur because
ParseDsdiffHeaderConfig in dsdiff.c does not validate the sizes of unknown
chunks before attempting memory allocation, related to a lack of
integer-overflow protection within a bytes_to_copy calculation and
subsequent malloc call, leading to insufficient memory allocation.
CVE-2018-10540: An issue was discovered in WavPack 5.1.0 and earlier for W64
input. Out-of-bounds writes can occur because ParseWave64HeaderConfig in
wave64.c does not validate the sizes of unknown chunks before attempting
memory allocation, related to a lack of integer-overflow protection within a
bytes_to_copy calculation and subsequent malloc call, leading to
insufficient memory allocation.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[Thomas:
- Do not select BR2_PACKAGE_ZLIB, because zlib is an optional
dependency.
- Handle optional dependencies in a more usual way in libgit2.mk:
group the addition in _DEPENDENCIES and in _CONF_OPTS for a given
library together.
- libgit2 can optionally use libssh2, not libssh.
- Add the optional dependency on zlib.
- Always pass USE_ICONV=ON, the detection works perfectly fine, with
both a C library providing iconv support built-in, and with
libiconv. If neither provides iconv, it gets disabled automatically
as expected.
- Add libiconv as an optional dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Avoid installing check-erlang-lib in the directory where the tarball is
extracted. Instead, use an absolute path to its actual location, i.e.:
$(TOPDIR)/$(EJABBERD_PKGDIR)/check-erlang-lib
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_LTRACE option has some architecture dependencies, but
those architecture dependencies are not taken into account for the
Config.in comment.
To fix this, this commit introduces a BR2_PACKAGE_LTRACE_ARCH_SUPPORTS
hidden boolean that gets used by both the BR2_PACKAGE_LTRACE option
and the Config.in comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit dfaa18af00 ("ltrace: disable
on mips/mipsel"), ltrace was disabled on mips/mipsel due to build
issues, and a comment was added in the Config.in file to explain that
even though ltrace has mips/mipsel support, it isn't enabled because
it doesn't build.
Then, in commit d23cce19c2 ("ltrace:
enable for mips/mipsel"), the build of ltrace on mips/mipsel was
re-enabled, because it has been fixed upstream.
However, the comment in the Config.in comment was not removed in this
commit. Due to this, we have a comment that says "we don't allow
enabling ltrace on mips/mipsel" and the line right below precisely
allows to enable ltrace on mips/mipsel.
Fix this inconsistency by removing the no longer valid comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we consider that any VFP FPU is a superset of VFPv2, and thus
we use VFPv2 as a way to detect that a VFP is used.
However, for Cortex-M cores, the optional FPU is not a superset of
VFPv2; it is even not a VFP [0].
As a consequence, we can no longer consider VFPv2 as a indication that
an FPU is present.
So, we introduce two new internal options, BR2_ARM_CPU_MAYBE_HAS_FPU and
BR2_ARM_CPU_HAS_FPU, which we use to consider the presence of an FPU.
[0] https://en.wikipedia.org/wiki/ARM_Cortex-M#Cortex-M4
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libidn2 is an implementation of the IDNA2008 + TR46
specifications (RFC 5890, RFC 5891, RFC 5892, RFC 5893,
TR 46).
http://www.gnu.org/software/libidn/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Use positive logic to test the BR2_PACKAGE_LIBIDN2_BINARY
condition.
- Put the definition of LIBIDN2_REMOVE_BINARY inside the
BR2_PACKAGE_LIBIDN2_BINARY condition, as suggested by Arnout.
- Adjust license details: library is under GPL-2.0+ or LGPL-3.0+,
while the command line tool is under GPL-3.0+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Merge both patches in a single one and slighlty update it to keep
current behavior (BUILD_STATIC set to yes by default) to be able to
send it upstream: https://github.com/zeromq/zmqpp/pull/218. Patch has
been merged upstream.
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Rework ncurses dependency to use new --with[out]-ncurses option
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6e223241e1 ("Add Transmission
package"), which added the transmission package, introduced a
BR2_PACKAGE_TRANSMISSION_REMOTE Config.in option, supposedly matching
the --enable-remote/--disable-remote transmission option.
However, transmission as of version 2.33 packaged by this initial
commit, did not have a --enable-remote/--disable-remote option, and it
was apparently never part of transmission.
Therefore, this commit removes this useless option. Since the
transmission-remote tool is automatically built when the daemon is
enabled, the Config.in.legacy handling selects
BR2_PACKAGE_TRANSMISSION_DAEMON.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0006-libsystemd.patch backports an upstream commit which renames
the systemd configure option.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extract from release announcement:
- (2.9, 2.7, 2.1) Fixed an issue in the X.509 module which could lead
to a buffer overread during certificate validation. Additionally, the
issue could also lead to unnecessary callback checks being made or to
some validation checks to be omitted. The overread could be triggered
remotely, while the other issues would require a non DER-compliant
certificate to be correctly signed by a trusted CA, or a trusted CA with
a non DER-compliant certificate. Found by luocm. Fixes#825.
- (2.9, 2.7, 2.1) Fixed the buffer length assertion in the
ssl_parse_certificate_request() function which could lead to an
arbitrary overread of the message buffer. The overreads could be caused
by receiving a malformed algorithms section which was too short. In
builds with debug output, this overread data was output with the debug
data.
- (2.9, 2.7, 2.1) Fixed a client-side bug in the validation of the
server's ciphersuite choice which could potentially lead to the client
accepting a ciphersuite it didn't offer or a ciphersuite that could not
be used with the TLS or DTLS version chosen by the server. This could
lead to corruption of internal data structures for some configurations.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update several of the licenses annotated in the gst1-plugins-bad.mk file.
1. Specify GPL-2.0 in license info.
* All of the *.[ch] that specify GPL also specify version 2 or later.
2. Remove GPL from audiovisualizers.
* Changlog notes move from GPL to LGPL. (2015-04-25)
* docs/plugins/inspect/plugin-audiovisualizers.xml claims "LGPL".
* All *.[ch] files under ./gst/audiovisualizers say "GNU Library General Public License".
3. Add GPL to yadif.
* Changelog notes that yadif is "GPL". (2013-02-07)
* docs/plugins/inspect/plugin-yadif.xml claims "GPL".
* All *.[ch] files under ./gst/yadif say "GNU General Public License" except for one "GNU Library General Public License".
4. Remove UNKNOWN from fdk_aac.
* docs/plugins/inspect/plugin-fdkaac.xml claims "LGPL".
* All *.[ch] files under ./ext/fdkaac say "GNU Lesser" or "GNU Library General Public License".
5. Add BSD-2c to dtls.
* docs/plugins/inspect/plugin-dtls.xml claims "BSD".
* All *.[ch] files under ./gst/dtls have BSD-2c text.
6. Add BSD-2c to openh264.
* Changelog notes that openh264 is "BSD-2". (2014-10-03)
* docs/plugins/inspect/plugin-openh264.xml claims "BSD".
* All *.[ch] files under ./ext/openh264 have BSD-2c text.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since uClibc-ng commit cde74b83f9b2 "ARC: remove special CFLAGS/LDFLAGS handling"
i.e. starting v1.0.23 CONFIG_ARC_CPU_xx options are not used.
Instead uClibc relies on toolchain defaults or build-system CFLAGS
for selection of ARC-specific code (i.e. distinguishes between
ARCompact and ARCv2 ISAs).
So we drop corresponding quirks from Buildroot as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dropped patch applied by upstream + LTP_TESTSUITE_AUTORECONF = YES which
this patch required and thus not needed any more.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this commit we update u-boot version to 2018.05 for
Synopsys boards. U-boot version 2018.05 was released recently
and includes significant changes for ARC boards:
* Fix for compile-time warning for AXS10x
* Add support of platform-specific commands for HSDK
* Add support for on-board SPI flash on HSDK
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't rely on a random host package to create the include/ directory for
us. Some packages do the wrong thing since they implicitly assume that
this directory exists already. Commit a557aedad2 (zstd: fix host headers
installation) shows an example of that.
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having imx-usb-loader on the target might be useful when you're
building a system that itself will be responsible for booting/flashing
i.MX based devices.
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
[Thomas:
- improve commit log
- fix indentation
- drop BR2_arm dependency
- add missing host-pkgconf dependency
- fix prefix variable to install in $(TARGET_DIR)/usr]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has been tested with Wayland back-end using weston-imx
repository on a i.MX6Q Nitrogen6x:
https://source.codeaurora.org/external/imx/weston-imx/
(tag rel_imx_4.9.51_8mq_ga to work with both i.MX6 and i.MX8MQ)
Weston was started as follows:
# export XDG_RUNTIME_DIR=/tmp
# weston --tty=1 --device=/dev/fb0
Finally the Vivante sample apps were started from weston-terminal:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc now considers its built-in libnsl as being obsolete, and requires
passing --enable-obsolete-libnsl to have it built and installed. libnsl
is now provided as a separate project [1], but it isn't packaged yet in
Buildroot.
In preparation for dropping --enable-obsolete-libnsl from the glibc
package, this commit ensures that exim doesn't use libnsl. It was
already the case for uclibc and musl toolchains, so this commit simply
extends that to make sure libnsl is also not used with glibc toolchains.
Only Exim's nis.so and nisplus.so lookup modules require libnsl,
but they are not build by default. So we can safely remove -lnsl
from the Makefile-Linux. If someone want these modules, a new libnsl
package must be added first to provide nsl library.
Since we remove -lnsl unconditionally, use a patch instead of a sed command.
[1] https://github.com/thkukuk/libnsl.git
[2] https://fedoraproject.org/wiki/Changes/NISIPv6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch, fixes [1]:
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp: In member function 'void QtWaylandClient::QWaylandXCompositeEGLWindow::createEglSurface()':
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:124:82: error: invalid conversion from 'Window {aka long unsigned int}' to 'EGLNativeWindowType {aka void*}' [-fpermissive]
m_surface = eglCreateWindowSurface(m_glxIntegration->eglDisplay(), m_config, m_xWindow,0);
^~~~~~~~~
In file included from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglclientbufferintegration.h:57:0,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.h:46,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:40:
.../host/arm-buildroot-linux-musleabihf/sysroot/usr/include/EGL/egl.h:265:31: note: initializing argument 3 of 'void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)'
EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
[1] http://autobuild.buildroot.net/results/9bcc76ed9e23c0d525f20b4da7f3bb5efe3083d4
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gdb configure script is given --enable-gdbserver when
BR2_PACKAGE_GDB_SERVER is set, but it is not given --disable-gdbserver
when BR2_PACKAGE_GDB_SERVER is unset.
gdb gdb/configure.ac defaults to enabling gdbserver in "native"
(host=target) cases, which is always the case when buildroot builds a
gdb which runs on the target hardware. The gdbserver will overwrite
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY gdbserver, if any.
Fix that by passing --disable-gdbserver when BR2_PACKAGE_GDB_SERVER is
unset.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libopusenc library provides a high-level API for encoding opus audio files
and live streams.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add missing select on opus in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux-nfs project switched to a new homepage. Update the help text
link.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
faketime currently doesn't build on host machines that use gcc 8.x due
to stricter checks done by gcc, and the fact that it is built with
-Werror.
As a simple stop-gap measure, this commit patches the faketime
Makefile to not use -Werror anymore.
The actual fixes for the gcc 8.x issues have been submitted upstream
at https://github.com/wolfcw/libfaketime/pull/161, but disabling
-Werror is a much smaller fix.
Also, it is worth mentioning that removing -Werror makes the existing
patch 0001-Disable-the-non-null-compare-warning-error.patch (which was
just disabling one specific warning). We nonetheless keep this patch
around as it is a backport from upstream.
Fixes:
http://autobuild.buildroot.net/results/bd223dfa1c4baa68e427d4941bd2e9917e22da84/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch.
This release fixes the security issues listed below.
CVE-2018-1000300: curl might overflow a heap based memory buffer when
closing down an FTP connection with very long server command replies.
https://curl.haxx.se/docs/adv_2018-82c2.html
CVE-2018-1000301: curl can be tricked into reading data beyond the end
of a heap based buffer used to store downloaded content.
https://curl.haxx.se/docs/adv_2018-b138.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The existing patch 0001-Build-buildconfig-for-the-host.patch changes
the exim build system to use the host compiler to build the
"buildconfig" program instead of the cross-compiler.
However, it still uses $(LIBS) which lists the target libraries to
link with, which shouldn't be used. Since buildconfig doesn't use any
library beyond the C library, we can simply drop using $(LIBS).
This will fix build failures of exim on Fedora 28, where libnsl is no
longer provided by the C library, causing build failures such as:
/usr/bin/gcc buildconfig.c
/usr/bin/ld: cannot find -lnsl
Fixes:
http://autobuild.buildroot.net/results/ac78fe18657558b3c12c03c08bf1081d7c06ca85/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kconfig uses either pkg-config or hard-coded /usr/include paths to find
the ncurses or ncursesw library. If ncursesw is found, it will include
<ncursesw.h>. Since Buildroot's host-ncurses doesn't install a .pc file,
and linux.mk anyway doesn't pass the pkg-config options to find the host
pkg-config files, Kconfig will always find the system's ncursesw.h.
However, since commit dde090c299 (linux: fix passing of host CFLAGS and
LDFLAGS) HOST_LDFLAGS is passed to the linux build system. Thus, if
host-ncurses was already built before 'make linux-menuconfig' is called,
the build will pick up libncurses from the host directory, which is NOT
widechar. Thus, two different ncurses configurations are mixed into the
final mconf program. This will result in serious breakage in the
rendering of the menus (lots of @ and question mark characters).
As a workaround (suggested by Yann), don't pass HOST_CFLAGS and
HOST_LDFLAGS when running kconfig commands. For kconfig, we should never
need host packages anyway. This way, the kconfig calls will always use
the system's ncurses and never our host-ncurses.
Note that the same problem could pop up for other kconfig packages as
well if we ever pass HOST_CFLAGS/HOST_LDFLAGS to them. We could force
HOSTCC=$(HOSTCC) directly in kconfig-package. However, for now there
are no other packages that exhibit this problem, so this can be
revisited when they do.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: David De Grave <david.degrave@essensium.com>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.0.2 is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.0.2 is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use "GST1_PLUGINS_BAD_LICENSE := $(GST1_PLUGINS_BAD_LICENSE), xxxx" construct
so that the list of licenses is presented as a comma-separated list.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also call the step hooks from the three steps they are currently not
called in:
- download,
- actual download (when main archive is not the real source, like
external toolchains),
- rsync (for local or override-srcdir).
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When json-c is enabled but libcurl is disabled, clamav tries to build
the clamsubmit program, which fails with:
CC clamsubmit.o
clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
#include <curl/curl.h>
This is due to an incorrect curl-config detection logic, leading to
/bin/curl-config being present making the configure script believe
that curl is available, even when --without-libcurl is explicitly
passed.
This commit adds a patch, submitted upstream, which fixes this
problem.
Fixes:
http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These configuration tweaks were added for compatibility with Blackfin
toolchains that bundled a uClibc version without shadow passwords
support. Blackfin is gone, so this is no longer needed.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If host-zstd builds when $(HOST_DIR)/include has not been created yet,
the install-includes target does not create this directory. Instead, the
install command copies the headers over $(HOST_DIR)/include, thus
creating a regular file instead of a directory. This leads to the
following installation failure:
Installing includes
install: cannot create directory ‘.../host/usr/include/’: File exists
Makefile:166: recipe for target 'install-pc' failed
make[1]: *** [install-pc] Error 1
Add a patch to fix that.
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PIE support in Buildroot should be enabled via the global option
BR2_RELRO_FULL option, and not done on a per-package basis, therefore
PIE should unconditionally be disabled in the cifs-utils package.
This has the added side-effect that it works around a binutils bug on
SPARC causing the linker to segfault when PIE is enabled:
sparc-linux-gcc -Wall -Wextra -D_FORTIFY_SOURCE=2 -fpie -pie -Wl,-z,relro,-z,now -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o mount.cifs mount.cifs.o mtab.o resolve_host.o util.o -lcap-ng
collect2: fatal error: ld terminated with signal 6 [Aborted], core dumped
This issue will reappear when we start testing BR2_RELRO_FULL in the
autobuilders, but in the mean time it avoids the problem.
Fixes:
http://autobuild.buildroot.net/results/a5342890f39bdccae1324e7d3dbe0eab1aad28e5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The lynx package incorrectly uses target LDFLAGS to build a host tool,
which causes a problem when we do a statically link build for the
target, on a host machine that doesn't support static linking.
A simple patch fixes the problematic makefile, and it has been
submitted upstream on the project mailing list.
Fixes:
http://autobuild.buildroot.net/results/38ba2531eeeb4a7985eddd2df8bfaf0b56e6a687/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the rework of the download infrastructure, the "file" download
helper gets passed an URL that starts with file://, but forgets to
strip it before passing it to "cp", causing a failure as the "cp"
program isn't prepared for file paths starting with file://. This is
fixed by stripping the file:// at the beginning of the URL.
In addition, the path passed to cp lacked a slash between the
directory path and the filename part of the url. This is fixed by
adding a slash at the appropriate places.
Fixes the following build failure when the "file" download method is
used:
cp: cannot stat 'file:///home/angelo/DEV/TOOLCHAINSarmv7-eabihf--glibc--bleeding-edge-2017.11-1.tar.bz2': No such file or directory
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_UCLIBC symbol doesn't exist, it was meant to be
BR2_TOOLCHAIN_BUILDROOT_UCLIBC.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If BR2_SHARED_LIBS is set, only install shared version of library
(continue to build both libraries through all target as there is no
libcap.so target but only a libcap.so.$(VERSION).$(MINOR))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot dl-wrapper tries to download
Qt5_CinematicExperience_%22rpi_%221.0.tgz, which fails, so this commit
fixes the archive name by removing useless double quotes.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libclang.so is statically linking against all LLVM static libraries
instead of linking dynamically against libLLVM.so.
This patch fixes this problem by setting LLVM_LINK_LLVM_DYLIB to ON.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump contains many bug fixes, as well as the following security
issue, patched in Go 1.10.1:
CVE-2018-7187: The "go get" implementation in Go 1.9.4, when the
-insecure command-line option is used, does not validate the import path
(get/vcs.go only checks for "://" anywhere in the string), which allows
remote attackers to execute arbitrary OS commands via a crafted web
site.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we fixed cross-compilation in the go package, cleanup the build
to remove the workaround added in 60c5c96ae1
"package/go: Build host tools with host CC". We only need a single pass
to build the go toolchain.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For various reasons, we've always suggested users to avoid using a
branch as version string for their packages, because it does not work
as a they would expect:
- it is not reproducible, because the branch may change between two
builds that are done at different times;
- it does not even follow the branch, as Buildroot anyway generates
a local tarball, which it will reuse on subsequent builds.
Furthermore, since we fetch and not pull, any existing local branch
is not updated.
Yet, until recently, using a branch name would just work (with the
above limitations): the git tree was cloned, the branch checked out,
and the tarball created.
But with the advent of the git caching, using a branch name does not
work anymore. Indeed, we now do a git-fetch, and that does not create
a local master branch. So we can't check out master, because it does
not exist locally. And for other branches, as noticed above, the local
branch does not get udpated to the remote one.
Furthermore, the local branches are only created by chance, again as a
side-effect of trying to fetch the "special refs".
So, we can't say that we reliably support the use of a branch name.
Update the manual to state that using a branch does not work. Remove
the 'stable' example, as it looked like the name of a stable branch;
instead, replace it with a version string that ressemble a tag.
Fix the layout of the manual by making the version examples an actual
bulleted list.
Note: the above is only entirely true for git. For Mercurial, CVS and
subversion, the status may be mixed, but nonetheless, using branches is
still a bad idea, if at least because it is not reproducible, and
because Buildroot does not even follow the branch. So, we do not
differentiate between the various SCMs, and just flatly state that using
a branch name is not supported.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since we reworked the download infra, the location for packages to look
for their files has moved to a per-package directory.
For systems where a download of the dahdi firmware files was already
done in a version prior to the rework, all was working fine so far,
because the files were indeed in the main DL directory.
But for systems where the download is first attempted after the rework,
the files are not found (even though they are properly downloaded).
Fix the location where dahdi-linux looks for its extra files.
Reported-by: ***** ***** <zyama.abel@mail.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: ***** ***** <zyama.abel@mail.ru>
Cc: Carlos Santos <casantos@datacom.ind.br>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since we reworked the download infra, the location for packages to look
for their files has moved to a per-package directory.
For systems where a download of the asterisk sound files was already
done in a version prior to the rework, all was working fine so far,
because the files were indeed in the main DL directory.
But for systems where the download is first attempted after the rework,
the files are not found (even though they are properly downloaded).
Fix the location where asterisk looks for its extra files.
Reported-by: ***** ***** <zyama.abel@mail.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: ***** ***** <zyama.abel@mail.ru>
Cc: Carlos Santos <casantos@datacom.ind.br>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A person on IRC reported a build failure with the util-linux package,
looking like this:
for I in uname26 linux32 linux64 ; do \
cd /home/aep/consulting/chargery/tracker/output/target/usr/bin && ln -sf setarch $I ; \
done
[...]
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
The issue was an empty path in the PATH variable, which means "current
working directory", causing a "ln" binary built by util-linux for the
target to be used instead of the system-provided "ln".
We already check a number of things in the PATH and LD_LIBRARY_PATH
variables in support/dependencies/dependencies.sh, but we were not
checking that PATH did not contain an empty path.
This commit fixes that and takes this opportunity to simplify the test
code for PATH and LD_LIBRARY_PATH.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add some explanations about the Blackfin removal, as suggested by
Yann E. Morin.
- Add list of resolved issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for mpv is not present in the tarball version 0.35.2, therefore
we bump this package to current git master branch to prepare the switch
from mplayer to mpv.
Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit dededf0ff2.
Building the only package depending on libcrossguid, Kodi, breaks due to
this bump:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp: In static member function ‘static std::__cxx11::string
StringUtils::CreateUUID()’:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp:1194:10: error: ‘GuidGenerator’ does not name a type
static GuidGenerator guidGenerator;
^~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp:1195:15: error: ‘guidGenerator’ was not declared in this
scope
auto guid = guidGenerator.newGuid();
^~~~~~~~~~~~~
This happens due to changes in libcrossguid:
https://github.com/graeme-hill/crossguid/blob/master/README.md
"This is version 0.2 of CrossGuid. If you all already using CrossGuid and
your code uses GuidGenerator then you are using version 0.1."
Even Kodi master branch has no support for libcrossguid-0.2.x yet so we
revert the bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit af313accf1,
hasher test application depends on dlfcn.h. To avoid putting all apps
under !BR2_STATIC_LIBS dependency, split BR2_PACKAGE_LIBKCAPI_APPS into
several variables.
Moreover, BR2_USE_MMU is only a dependency of BR2_PACKAGE_LIBKCAPI_TEST
as other applications don't use fork.
Finally, enc or dgst applications could be enabled in a next patch if
needed.
Fixes:
- http://autobuild.buildroot.net/results/7c57f3025030eff41a5cde52759821249859caf1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dropbear 2018.76 now uses the --enable-static option to indicate that a static
binary should be built. This will incorrectly pick up the generic buildroot
option intended for building static libraries, causing an unwanted static
binary build with BR2_SHARED_STATIC_LIBS.
Fix by appending an --disable-static configure flag, overriding the buildroot
default.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit b4fc5a180c (package/busybox: support spaces in module aliases in
mdev) changed the mdev coldplugging to handle sysfs path elements and
modalias values containing spaces. This unfortunately doesn't work as was
recently reported:
http://lists.busybox.net/pipermail/buildroot/2018-May/220903.html
The problem is that sort -z also expects the fields of the input files to be
zero terminated, which is not the case for modalias sysfs entries.
So drop the -z option to sort. Spaces in modalias entries could be handled
with the xargs -d '\n' option, but that is unfortunately not supported by
the busybox applet. Instead, use tr to convert newlines to zeros so we can
use xargs -0.
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure.ac check for atomic intrinsics assumes that if an atomic
intrinsic is not available, it's because we must link with
libatomic. Except that libatomic is not always available, for example
with gcc <= 4.7.
To fix this, this commit adds a patch that reworks the atomic check in
configure.ac. It has been submitted upstream, and tested in a number
of different combinations.
Fixes:
http://autobuild.buildroot.net/results/b045488d880a4013ed82937e7115b7636867e01d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use += for the SUDO_CONF_ENV conditional assignment to avoid override of
SUDO_CONF_ENV assignments that might be added in the future.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch to fix compile with latest x264 library.
Fixes [1]:
gstx264enc.c: In function 'plugin_init':
gstx264enc.c:2900:36: error: 'x264_bit_depth' undeclared (first use in this function); did you mean 'x264_picture_t'?
default_vtable.x264_bit_depth = &x264_bit_depth;
^~~~~~~~~~~~~~
x264_picture_t
[1] http://autobuild.buildroot.net/results/a766a28c584534b6a30839cfd98428d840bce3f2
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils installs its binaries both as bin/<tuple>-<tool> and as
<tuple>/bin/<tool>, and hardlinks are used to reduce disk space
consumption. This causes a problem for host-binutils with our rpath
fixing logic done by "make sdk".
Indeed, the fix-rpath script starts by fixing up the rpath of
bin/<tuple>-<tool>, and sets the RPATH to $ORIGIN/../lib/. Then
fix-rpath moves on to <tuple>/bin/<tool>, and doesn't find the library
the tool depends on, and clears the RPATH. The result is that the
binutils tool are not usable.
Note that this is only visible currently on the ARC architecture,
because on this architecture, binutils is fetched from git, which
causes host-flex to be built, and some binutils tools to use the libfl
shared library. Therefore, the binutils tools don't use just the
standard C library (which is provided by the system) but also libfl
from $(HOST_DIR)/lib, and therefore if the RPATH isn't set correctly,
those tools don't work properly.
In order to address this, this comit adds a post-install hook to
host-binutils that replaces those hard links by symbolic links. It is
worth mentioning that library loading and RPATH usage occurs *after*
resolving the symbolic links, which makes this solution work.
Fixes:
http://autobuild.buildroot.net/results/b2562b05d397d4e1ffe0f8d2f4ce4c84ab6feae1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One program of udftools uses the readline library, but fails to build
in static linking configurations. In order to fix this, we teach
udftools configure.ac to use pkg-config to detect the readline
library, and to use the proper flags provided by pkg-config.
This obviously requires an autoreconf of the package, and the addition
of host-pkgconf in the dependencies.
Fixes:
http://autobuild.buildroot.net/results/113a94049d89b8f065112e5d4482667a7b7fb843/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (such as udftools) fail to build against readline in
static linking configurations. To fix this, we install the .pc file
provided by readline.
Unfortunately, this .pc file is by default not correct, so a patch is
added to fix it, and this patch requires to re-autoconf the package
(but not autoreconf since only autoconf is used).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udftool/Config.in selects BR2_PACKAGE_READLINE, but udftool does not
depend on it. Readline is not a runtime dependency: one of the udftool
program links against it.
This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/66561794
LINUX_DTS_NAME may end up with a leading space because of the += logic, and
may contain multiple dts files - Neither of which works when we construct
the {cu,simple}Image.$(LINUX_DTS_NAME) make target name.
Fix it by using the first word in the variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The name of the configure option is, and has always been,
--enable-xattr, not --enable-attr. Otherwise, configure
whines:
configure: WARNING: unrecognized options: --enable-attr
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some files of log4cplus are licensed under BSD-2-Clause as stated in
LICENSE file: "Each file of log4cplus source is licensed using either
two clause BSD license or Apache license 2.0."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable for musl. can-utils now uses the error() glibc extension.
Use Makefile as license file.
Change homepage link to the github repo. The README.md file is much more
informative than the elinux.org wiki page.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this target fails to build:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Even though the fix for this build failure is easy, I prefer to
maintain only imx6ulevk_defconfig, which is a target for the
same board, but uses mainline kernel and U-Boot versions instead.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561695
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this target fails to build:
arch/arm/mach-imx/built-in.o: In function `init_mmdc_lpddr2_settings':
platform-spi_imx.c:(.text+0x8f18): undefined reference to `imx6sll_lpddr2_freq_change'
arch/arm/mach-imx/built-in.o: In function `imx6ul_cpuidle_init':
platform-spi_imx.c:(.init.text+0x195c): undefined reference to `mx6ull_lpm_wfi_end'
platform-spi_imx.c:(.init.text+0x1960): undefined reference to `mx6ull_lpm_wfi_start'
platform-spi_imx.c:(.init.text+0x1964): undefined reference to `imx6ull_low_power_idle'
arch/arm/mach-imx/built-in.o: In function `imx6sl_init_late':
platform-spi_imx.c:(.init.text+0x56f0): undefined reference to `imx6sll_cpuidle_init'
Makefile:969: recipe for target 'vmlinux' failed
NXP 4.9 kernel does not properly support mx31, so better remove this target.
mx31_3stack board is currently supported in U-Boot and kernel mainline,
so if someone is interested on this board, then a target can be introduced
later which uses these mainline components.
Currently I do not have access to this board, so remove it its defconfig
for now.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561688
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this target fails to build:
Error: No BOOT_FROM tag in board/freescale/mx6slevk/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
This problem has been already solved in upstream U-Boot, but not
on NXP version of U-Boot.
To avoid the maintainance burden of keeping two defconfigs for the
same board, remove freescale_imx6sololiteevk_defconfig in favor
of imx6slevk_defconfig, which uses U-Boot and kernel mainline.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561693
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-nasm fails to compile with GCC 8:
In file included from ./include/nasm.h:46,
from asm/nasm.c:47:
./include/nasmlib.h:194:1: error: ‘pure’ attribute on function returning ‘void’ [-Werror=attributes]
void pure_func seg_init(void);
^~~~
Pull a patch from upstream that removes the stale declaration of
seg_init, which was eliminated a long time ago.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Dropbear 2018.76 changed the default ecdsa host key size form 521 to 256
bits, but this breaks systems with an existing 521 bit key, blocking ssh
logins.
Apply the upstream fix from https://secure.ucc.asn.au/hg/dropbear/rev/0dc3103a5900 :
Only advertise a single server ecdsa key when -R (generate as required) is
specified. Fixes -R now that default ecdsa key size has changed.
[Peter: apply-patches.sh does not like suffix-less filename, so include
patch in Buildroot]
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that CVE-2018-9336 fixed in this version does not affect Buildroot
since it is Windows specific.
Drop interoperability with older busybox versions. We removed support
for busybox version selection long ago.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout reported an issue with the upcoming top-level parallel build.
The file /etc/shells can be modified by several packages (shell providers)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When mksh is selected, /bin/mksh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using mksh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When zsh is selected, /bin/zsh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using zsh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When tmux is selected, /usr/bin/tmux is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using tmux as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When screen is selected, /usr/bin/screen is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using screen as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
While at it, drop an empty line between an existing hook definition
and its registration, to be consistent with the coding style used in
the rest of Buildroot.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When dash is selected, /bin/dash is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using dash as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When ash (busybox) is selected, /bin/{a,hu}sh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using {a,hu}sh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ea55e1323 (core/pkg-infra: don't enforce site-method for extra
downloads) forgot to account for those packages that have nothing to
download, like the skeleton, or like virtual packages...
The side effect is that the message "foo Downloading" is thus
displayed when it should not be.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, GST1_PLUGINS_BAD_LICENSE_FILES starts out set to
both the GPL COPYING file and the LGPL COPYING.LIB file, but
the GST1_PLUGINS_BAD_LICENSE handling only claims LGPL, and
then intelligently adds GPL if needed. This change moves the
GPL file addition to the same conditional clause so that the
GPL file is included in the legal-info location only if GPL
code is actually used.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The systemd ConditionNeedsUpdate option is useful when offline updates
of the vendor operating system resources in /usr require updating of
/etc or /var on the next following boot.
Two examples of services making use of this option are
systemd-hwdb-update.service and systemd-sysusers.service.
ConditionNeedsUpdate=/etc will be true if the mtime of /etc/.updated
is older than the mtime of /usr. After services conditional on
ConditionNeedsUpdate have run, systemd-update-done.service will
synch the mtime of /usr to /etc/.updated so that the condition will
be false on subsequent boots.
For systems with writable /usr partitions where updates are done to
the running system, the update program will touch /usr as a final step.
But with Buildroot, where updates are often done by dumping a new
image onto the device, and where /usr is on a filesystem mounted
read-only, touching /usr as part of the update process is not practical.
Instead, it should be done a build time.
For testers, please note that systemd-update-done in v234 added a
regression where the mtime of /etc/.updated is set to the current time
instead of the mtime or /usr. This will be fixed in v239.
For more details, see:
http://0pointer.de/public/systemd-man/systemd.unit.htmlhttp://0pointer.de/public/systemd-man/systemd-update-done.service.html
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
crypt() is an optional glibc feature. Some distros, like Fedora 28, are
phasing it out to be replaced with libxcrypt [1]. Unfortunately this
change is only ABI compatible, not source code compatible, i.e. the code
will compile with warnings about undefined crypt(), but the resulting
binary will crash.
Follow the guidance in the Fedora bug and include crypt.h when
_XOPEN_CRYPT is not defined.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1566464
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgsasl needs wctomb, if not available it will define it to
rpl_wctomb. However, as there is no rpl_wctomb implementation, the .so
ends up with an undefined reference to wctomb.
This will cause linker errors for packages trying to use it such as
msmtp:
/home/peko/autobuild/instance-0/output/host/bin/../microblazeel-buildroot-linux-uclibc/sysroot/usr//lib/libgsasl.so:
undefined reference to `wctomb'
Fixes:
- http://autobuild.buildroot.net/results/1bc7cb9a2dd1af746c78f3150528206b7256e40f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LLVMHello.so contains the Hello World example of an
LLVM pass. It is not needed on the target.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The site method only ever applies to the main download, while extra
downloads are always to be fetched with wget.
However, the site method is prepended to the URL from within the
DOWNLOAD macro (well, a variable evaluated in the DOWNLOAD macro),
which is called for each download of a package, thus effectively
prepending the site method to all downloads, even the extra ones (and
the patches).
We fix that by prepending the site method from within the
generic-package infra, so that it only applies to the main download.
For that, we move the main _SOURCE out of the foreach loop, so that
we can prepend the site-method to it, without impacting the other
downloads.
Reported-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when the main download if from an SCM, we exclude all
downloads from being hash-checked, on the assumption that we don't
have hashes for downloads from an SCM.
However, the exclusion is computed on the DOWNLOAD macro, which is
called for each download of a package, thus effectively disabling
hash checks for extra downloads, even though those are only ever
download with wget.
What we really wanted to do, in fact, was to exclude just the main
download.
We fix that by appending the main source file to the global list of
excluded files, from within the generic-package infra itself.
Reported-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit "add dependency on elfutils for R600 with LLVM" [1] select
elfutils package at Kconfig level without adding it the make dependency.
Enabling r600 support lead to a build issue when building from
scratch with "make mesa3d".
Fixes:
checking for RADEON... yes
configure: error: r600 requires libelf when using llvm
elfutils dependency is needed by r600 with llvm support and radeonSI.
Fixes:
checking for RADEON... yes
checking for AMDGPU... yes
configure: error: radeonsi requires libelf when using llvm
Add a new BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS hidden Config.in boolean
selected by R600 and RadeonSI at Kconfig level.
When selected, BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS add elfutils dependency
at make level.
[1] 92fda8761a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Michał Kalbarczyk <michal@gamecodehq.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_MESA3D_OPENGL_EGL is selected with RadeonSI drvier,
mesa platform must be specified with drm.
Fixes:
hecking for RADEON... yes
checking for AMDGPU... yes
configure: error: radeonsi requires one of these:
1) --with-platforms=drm (X, Wayland, offscreen rendering based on DRM)
2) --with-platforms=surfaceless (offscreen only)
3) --with-platforms=android (Android only)
Recommended options: drm,x11
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
VLC uses Git as its version control system, so it makes sense to use
Git formatted patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
When a static /dev is used on a readonly rootfs then the runtime ln
invocations in the inittab will fail, so we need to add the symlinks at
build time. Makedevs doesn't support creating symlinks, so instead add the
symlinks to the default skeleton.
For non-static /dev setups, the kernel will mount devtmpfs which shadows the
/dev of the rootfs, but then the runtime ln invocations in inittab will
create the symlinks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
This symbolic link and his companions `/dev/std*` are created by (e)udev [1],
but not by mdev, resulting in the following error when using the following
expression:
```
bash: /dev/fd/62: No such file or directory
```
For the sake of simplicity, lets fix this by creating the symlinks in inittab.
It is only really needed if eudev isn't used, but it doesn't really hurt to
create them even if eudev will recreate them afterwards.
Note, that we do not create the symlink `/dev/core` as `/proc/kcore` is
not available on all platforms, e.g. ARM, and the feature is not much
appreciated [2].
[1] 8943501993/src/shared/dev-setup.c (L35-L40)
[2] https://lwn.net/Articles/45315/
[Peter: redirect errors to /dev/null for ro rootfs]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
This symbolic link and his companions `/dev/std*` are created by (e)udev [1],
but not by mdev, resulting in the following error when using the following
expression:
```
bash: /dev/fd/62: No such file or directory
```
For the sake of simplicity, lets fix this by creating the symlinks in inittab.
It is only really needed if eudev isn't used, but it doesn't really hurt to
create them even if eudev will recreate them afterwards.
Note, that we do not create the symlink `/dev/core` as `/proc/kcore` is
not available on all platforms, e.g. ARM, and the feature is not much
appreciated [2].
[1] 8943501993/src/shared/dev-setup.c (L35-L40)
[2] https://lwn.net/Articles/45315/
[Peter: redirect output (errors) to /dev/null for ro rootfs]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop uClibc-ng compatibility patch. Current uClibc-ng provides the
needed definitions.
Drop the libc-config.h musl compatibility workaround patch. iproute2
update its headers copy to current kernel version for which this
workaround is no longer needed.
Don't modify tc/Makefile to make XT_LIB_DIR get the value of
IPT_LIB_DIR. Pass the correct value directly in CFLAGS.
Add a patch removing arpd dependency on threading support.
Rename IPROUTE2_WITH_IPTABLES to IPROUTE2_DISABLE_IPTABLES which better
describes what it does.
Don't patch the configure script for the cross compiler. The CC
environment variable is enough.
Don't force the CCOPTS make variable. The CFLAGS environment variable
does the trick for target code.
Don't patch CCOPTS out of netem/Makefile. The CBUILD_CFLAGS environment
variable can pass the host CFLAGS to host code.
The ifcfg script is now POSIX shell compatible. Remove its installation
dependency on bash.
Pass installation DESTDIR in the environment. Don't force SBINDIR, DOCDIR, and
MANDIR. The default values are fine.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We currently attempt a shallow clone, as tentative to save bandwidth and
download time.
However, now that we keep the git tree as a cache, it may happen that we
need to checkout an earlier commit, and that would not be present with a
shallow clone.
Furthermore, the shallow fetch is already really broken, and just
happens to work by chance. Consider the following actions, which are
basically what happens today:
mkdir git
git init git
cd git
git remote add origin https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
git fetch origin --depth 1 v4.17-rc1
if ! git fetch origin v4.17-rc1:v4.17-rc1 ; then
echo "warning"
fi
git checkout v4.17-rc1
The checkout succeeds just because of the git-fetch in the if-condition,
which is initially there to fetch the special refs from github PRs, or
gerrit reviews. That fails, but we just print a warning. If we were to
ever remove support for special refs, then the checkout would fail.
The whole purpose of the git cache is to actually save bandwidth and
download time, but in the long run. For one-offs, people would
preferably use a wget download (e.g. with the github macro) instead of
a git clone.
We switch to always doing a full clone. It is more correct, and pays off
in the long run...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When a git tree has had sub-dir <-> sub-module conversions, or has had
submodules added or removed over the course of time, checking out a
changeset across those conversions/additions/removals may leave
untracked files, or may fail because of a conflict of type.
So, before we checkout the new changeset, we forcibly remove the
submodules. The new set of submodules, if any, will be restored later.
Ideally, we would use a native git command: git submodule deinit --all.
However, that was only introduced in git 1.8.3 which, while not being
recent by modern standards, is still too old for some enterprise-grade
distributions (RHEL6 only has git-1.7.1).
So, instead, we just use git submodule foreach, to rm -rf the submodules
directory.
Again, we would ideally use 'cd $toplevel && rm -rf $path', but
$toplevel was only introduced in git 1.7.2. $path has always been there.
So, instead, we just cd back one level, and remove the basename of the
directory.
Eventually, we need to get rid of now-empty and untracked directories,
that were parents of a removed submodule. For example. ./foo/bar/ was a
submodule, so ./foo/bar/ was removed, which left ./foo/ around.
Yet again, recent-ish git versions would have removed it during the
forced checkout, but old-ish versions (e.g. 1.7.1) do not remove it with
the forced checkout.
Instead we rely on the already used forced-forced clean of directories,
untracked, and ignored content, to really get rid of extra stuff we are
not interested in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In some cases, the repository may be in a state we can't automatically
recover from, especially since we must still support oldish git versions
that do not provide the necessary commands or options thereof.
As a last-ditch recovery, delete the repository and recreate the cache
from scratch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We really want the user not to use our git cache manually, or their
changes (committed or not) may eventually get lost.
So, add a warning file, not unlike the one we put in the target/
directory, to warn the user not to use the git tree.
Ideally, we would have carried this file in support/misc/, but the git
backend does not have access to it: the working directory is somewhere
unknown, and TOPDIR is not exported in the environment.
So, we have to carry it in-line in the backend instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When rebuilding a package, simply appending the package's file list to
the global list means that the package list grows for every rebuild, as
does the time taken to check for files installed by multiple packages.
Furthermore, we get false positives where a file is reported as being
installed by multiple copies of the same package.
With this approach we may end up with orphaned files in the target
filesystem if a package that has been updated and rebuilt no longer
installs the same set of files, but we know that only a clean build will
produce reliable results. In fact it may be helpful to identify these
orphaned files as evidence that the build is not clean.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LibreSSL 2.7.x breaks libcurl 7.59.0 with the error:
error: static declaration of ‘OpenSSL_version_num’ follows non-static
declaration
This failure has since been fixed upstream with commit:
7c90c93c0b
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Freescale specific alsa-lib plugins for the i.MX processor family.
For now, the only provided plugin is:
* Rate Converter Plugin Using Freescale ASRC Resampler
The ASRC hardware resampler can be found on i.MX53 and most i.MX 6
processors.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- Remove the mention "This package is provided by Freescale as-is and
doesn't have an upstream." from the Config.in help text, since
according to Gary Bisson, there is a Git repository for such
projects, and therefore some form of upstream.
- Add missing entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: slight rephrasing in error message, update manual]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our package infrastructure uses inheritance of a number of values from
the target package to the host package, which assumes the target
package is defined before the host package. In addition, future
changes are going to make this requirement even more important.
Therefore, let's fix the qemu package so that it declares its target
variant before its host variant, like all other packages in
Buildroot. We handle qemu separately from other packages, because
unlike other packages, it didn't had the "eval" for the host and
target packages at the end of the file, but rather all variables
related to the host variant first, then the call to the package
infrastructure for the host variant, then the variables related to the
target variant, and finally the call to the package infrastructure for
the target variant. We are inverting the order of those two big parts
in this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our package infrastructure uses inheritance of a number of values from
the target package to the host package, which assumes the target
package is defined before the host package. In addition, future
changes are going to make this requirement even more important.
Therefore, let's fix the android-tools, gauche, lcms2,
linux-syscall-support and pngquant packages, so that they declare
their target variant before their host variant, like all other
packages in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
CVE-2017-12122: An exploitable code execution vulnerability exists in the
ILBM image rendering functionality of SDL2_image-2.0.2. A specially crafted
ILBM image can cause a heap overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14440: An exploitable code execution vulnerability exists in the
ILBM image rendering functionality of SDL2_image-2.0.2. A specially crafted
ILBM image can cause a stack overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14441: An exploitable code execution vulnerability exists in the
ICO image rendering functionality of SDL2_image-2.0.2. A specially crafted
ICO image can cause an integer overflow, cascading to a heap overflow
resulting in code execution. An attacker can display a specially crafted
image to trigger this vulnerability.
CVE-2017-14442: An exploitable code execution vulnerability exists in the
BMP image rendering functionality of SDL2_image-2.0.2. A specially crafted
BMP image can cause a stack overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14448: An exploitable code execution vulnerability exists in the
XCF image rendering functionality of SDL2_image-2.0.2. A specially crafted
XCF image can cause a heap overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14449: A double-Free vulnerability exists in the XCF image
rendering functionality of SDL2_image-2.0.2. A specially crafted XCF image
can cause a Double-Free situation to occur. An attacker can display a
specially crafted image to trigger this vulnerability.
CVE-2017-14450: A buffer overflow vulnerability exists in the GIF image
parsing functionality of SDL2_image-2.0.2. A specially crafted GIF image
can lead to a buffer overflow on a global section. An attacker can display
an image to trigger this vulnerability.
For details, see the announcement:
https://discourse.libsdl.org/t/sdl-image-2-0-3-released/23958
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Requests need hashlib to run with Python 2. Otherwise it is not possible to
import, due to missing e.g. md5.
[Peter: tweak commit message]
Signed-off-by: Sven Haardiek <sven.haardiek@iotec-gmbh.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use tar.xz (tar.bz2 is not available since 1.4.8)
- Use cmake infrastructure (autotools has been removed)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use tar.xz (tar.bz2 is not available since 1.3.5)
- Use cmake infrastructure (autotools has been removed)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to cmake infrastructure
COPYING has been replaced by LICENSE
Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the run-time tests to build rust and rust-bin packages are run via Docker,
the $USER environment variable is not set, which makes cargo fail when
initializing the test project.
So add it to make cargo happy.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The VTE package contains a termcap file implementation for
terminal emulators.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: fix encoding of license name.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add hash for license file
- guid.cpp and guid.h have been renamed Guid.cpp and Guid.hpp (they
will be renamed back to guid.cpp and guid.hpp in next release)
- Continue to use package-generic infrastructure as cmake doesn't work
properly with this version. Commit such as
974def4e0a
is needed. Migration on cmake should be done in next package
release.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for Volcanic Islands (VI), Sea Islands (CI) and Southern
Islands (SI) cards.
This firmware files will be needed if linux kernel is compiled with
amdgpu enabled.
Signed-off-by: David Barbion <davidb@230ruedubac.fr>
[Thomas: add hash for LICENSE.amdgpu]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove buildroot systemd script to use the script embedded by boinc
since version 7.9.1.
Set BOINC_USERS to be able to use this script
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bluez-alsa is a Bluetooth Audio ALSA Backend.
Note that we are using the latest commit from git master branch
instead of the latest version tag v1.2.0 which is almost a year old
and is 64 commits behind master.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- simplify the comments in the "depends on"
- move the Config.in comment below the hcitop option to let
menuconfig properly indent the hcitop option under bluez-alsa]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, Dropbear's configure script enables hardening
flags. Unfortunately, the check for SSP only uses AC_COMPILE_IFELSE(),
and therefore doesn't properly test for the availability of libssp,
visible only at link time.
In addition, Buildroot passes its own hardening flags, depending on
various global options. So, we simply disable hardening flags in
Dropbear.
This fixes a build failure with non-SSP capable toolchains happening
since the bump to 2018.76.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
with this new version:
- "configure --enable-static" should now be used instead of
"make STATIC=1"
- any customised options should be put in localoptions.h
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to target/mips/TODO in the Qemu sources:
MIPS64
------
- Userland emulation (both n32 and n64) not functional.
And indeed, trying to run a mips64n32 binary under qemu user emulation
results in:
Invalid ELF image for this architecture
So we move the BR2_mips64(el) dependency from
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS, so that only the system
emulation is available on mips64, and not the user-mode emulation.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Not all architectures are supported by both the system emulation and
user-mode emulation in Qemu, so a single
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS doesn't work very well.
Therefore, this commit introduces the
BR2_PACKAGE_HOST_QEMU_{SYSTEM,USER}_ARCH_SUPPORTS hidden options. We
keep the BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS option for the (numerous)
architectures supported by both system emulation and user-mode
emulation.
The 'select' logic to make sure that at least either system emulation
or user-mode emulation is selected is reworked, and done carefully to
avoid recursive Kconfig dependencies.
For now BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS and
BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS are the same, but they will
become different in a follow-up commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Linux 3.10, perf's NO_NEWT configuration option simply sets
NO_SLANG=1 and there is no dependency on libnewt.
We already handle NO_SLANG correctly based on whether or not
BR2_PACKAGE_SLANG is selected, so all we accomplish by setting NO_NEWT=1
is disabling perf's TUI when all of the dependencies are available.
To simplify all of this, introduce a new config option to enable the
perf TUI which depends on slang and add a check to prevent building the
TUI on versions which are too old. The check for NO_SLANG is equivalent
to checking if NO_NEWT is required as NO_SLANG was added in the same
commit that removed the libnewt dependency and deprecated NO_NEWT
(6692c262df4f, "perf tools: Remove dependency on libnewt", 2013-03-28).
Signed-off-by: John Keeping <john@metanate.com>
[Thomas: add missing BR2_USE_MMU dependency, coming from the slang
package. Noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool might be useful on Android devices modded with Buildroot. Indeed
it allows to modify Android Boot Image partition directly from running
rootfs and so let the user free to keep Android stuff on his device
(mainly bootloader) while testing/using Buildroot kernel/rootfs.
For example, one can modify kernel cmdline on Boot Image partition and
tell Android bootloader to launch kernel with a given rootfs fitted with BR
instead of Android's one.
Build-tested with ./utils/test-pkg -p abootimg -c config.abootimg -a
with config.abootimg containing:
BR2_USE_MMU=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_UTIL_LINUX=y
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
armv5-ctng-linux-gnueabi [ 1/47]: OK
armv7-ctng-linux-gnueabihf [ 2/47]: OK
br-aarch64-glibc [ 3/47]: OK
br-arcle-hs38 [ 4/47]: OK
br-arm-basic [ 5/47]: OK
br-arm-cortex-a9-glibc [ 6/47]: OK
br-arm-cortex-a9-musl [ 7/47]: OK
br-arm-cortex-m4-full [ 8/47]: SKIPPED
br-arm-full [ 9/47]: OK
br-arm-full-nothread [10/47]: OK
br-arm-full-static [11/47]: OK
br-bfin-full [12/47]: SKIPPED
br-i386-pentium4-full [13/47]: OK
br-i386-pentium-mmx-musl [14/47]: OK
br-m68k-5208-full [15/47]: SKIPPED
br-m68k-68040-full [16/47]: OK
br-microblazeel-full [17/47]: OK
br-mips32r6-el-hf-glibc [18/47]: OK
br-mips64-n64-full [19/47]: OK
br-mips64r6-el-hf-glibc [20/47]: OK
br-mipsel-o32-full [21/47]: OK
br-nios2-glibc [22/47]: OK
br-openrisc-uclibc [23/47]: OK
br-powerpc-603e-basic-cpp [24/47]: OK
br-powerpc64le-power8-glibc [25/47]: OK
br-powerpc64-power7-glibc [26/47]: OK
br-powerpc-e500mc-full [27/47]: OK
br-sh4-full [28/47]: OK
br-sparc64-glibc [29/47]: OK
br-sparc-uclibc [30/47]: OK
br-x86-64-core2-full [31/47]: OK
br-x86-64-musl [32/47]: OK
br-xtensa-full [33/47]: OK
i686-ctng-linux-gnu [34/47]: OK
linaro-aarch64 [35/47]: OK
linaro-arm [36/47]: OK
mips64el-ctng_n32-linux-gnu [37/47]: OK
mips64el-ctng_n64-linux-gnu [38/47]: OK
powerpc-ctng_e500v2-linux-gnuspe [39/47]: OK
sourcery-arm-armv4t [40/47]: OK
sourcery-arm [41/47]: OK
sourcery-arm-thumb2 [42/47]: OK
sourcery-mips64 [43/47]: OK
sourcery-mips [44/47]: OK
sourcery-nios2 [45/47]: OK
sourcery-x86-64 [46/47]: OK
x86_64-ctng_locales-linux-gnu [47/47]: OK
47 builds, 3 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: fix license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides Clang tools and libraries for the host and
libclang for the target.
host-clang is needed to build libclc, which is provided in a follow-up
patch.
We need libclang for the target because it is used by most of OpenCL
implementations.
A later patch in this series will enable Clover, the OpenCL
implementation part of Mesa3D, which requires libclang.
clang-tblgen must be copied to HOST_DIR as it is not installed by
default but is needed for cross-compilation:
http://lists.llvm.org/pipermail/cfe-dev/2015-June/043318.html
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- Add Config.in comment about BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- Minor reformatting/rewrapping of comments in .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The website advertises a favicon in PNG format, but we don't actually
provide one. From docs/website/header.html:
<link rel="shortcut icon" href="images/favicon.png">
So add one. Generated by:
convert -geometry 32x32! docs/website/images/logo_small.png \
docs/website/favicon.png
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The clipboard javascript code causes an error:
Uncaught TypeError: Illegal constructor
at buildroot.js:58
Which is caused by a recent change in upstream clipboard.js:
https://github.com/zenorocha/clipboard.js/releases/tag/v2.0.0
Changes constructor from new Clipboard() to new ClipboardJS()
The issue was that we were using the master version of clipboard.js instead
of a specific release. Fix it by using the 1.7.1 version (latest release
before the constructor change) instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Library to enable your code run as a daemon process on Unix-like
systems.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If one wants to use GDB with python support on the target, you need the support
files installed by GDB. These get usually deleted to save some space, so I just
wrapped the Makefile code deleting them in a conditional block depending on if
python support is active or not.
Signed-off-by: Jonas Zaddach <jzaddach@cisco.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use positive logic "if python is disabled"
- put the comment inside the condition, as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script causes a large number of flake8 warnings, is rarely used
(but even never used), and is going to be replaced at some point by
the improved pkg-stats that will give details about the upstream
version available for all packages, not just X.org packages.
Therefore, let's drop the xorg-release script in order to silence all
those flake8 warnings:
support/scripts/xorg-release:36:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:58:27: E201 whitespace after '{'
support/scripts/xorg-release:58:44: E203 whitespace before ':'
support/scripts/xorg-release:58:54: E202 whitespace before '}'
support/scripts/xorg-release:63:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:64:15: E261 at least two spaces before inline comment
support/scripts/xorg-release:67:32: E261 at least two spaces before inline comment
support/scripts/xorg-release:86:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:95:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:107:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:115:20: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:123:34: E201 whitespace after '{'
support/scripts/xorg-release:124:46: E203 whitespace before ':'
support/scripts/xorg-release:124:50: E202 whitespace before '}'
support/scripts/xorg-release:127:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:141:15: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:146:21: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:176:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:180:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CMake < 3.11 doesn't support add_library() without any source file
(i.e add_library(foo SHARED)). But flann CMake use a trick that use
an empty string "" as source list (i.e add_library(foo SHARED "")).
This look like a bug in CMake < 3.11.
With CMake >= 3.11, the new behaviour of add_library() break the
existing flann CMake code.
>From CMake Changelog [1]:
"add_library() and add_executable() commands can now be called without
any sources and will not complain as long as sources are added later
via the target_sources() command."
Note: flann CMake code doesn't use target_sources() since no source file
are provided intentionally since the flann shared library is created by
linking with the flann_cpp_s static library with this line:
target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive)
If you try to use "add_library(flann_cpp SHARED ${CPP_SOURCES})" (as it should
be normally done), the link fail due to already defined symbol.
They are building the shared version using the static library "to speedup the
build time" [3]
This issue is already reported upstream [2] with a proposed solution.
Fixes:
http://autobuild.buildroot.net/results/b2f/b2febfaf8c44ce477b3e4a5b9b976fd25e8d7454
[1] https://cmake.org/cmake/help/v3.11/release/3.11.html
[2] https://github.com/mariusmuja/flann/issues/369
[3] 0fd62b43be
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added license hash, switched _UPSTREAM to an upstream directory which
also contains older release tarballs.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch to split libzstd install target into pc, static, shared and
includes target. Call only the needed ones for the buildroot
staging/target install steps (respect the static/shared
configuration).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Yann E. Morin, refactor the build/install
commands to use only one invocation, with intermediate ZSTD_BUILD_LIBS
and ZSTD_INSTALL_LIBS variables, defined depending on whether
static/shared/static+shared is selected.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For the host only the libzstd library is built (no need for host-lz4
host-xz host-zlib dependencies because they affect only the cmdline
tool).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use '-C $(@D)/lib' instead of '-C $(@D) lib' at build time,
to be consistent with what is done at install time, as suggested by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-9234: Unenforced configuration allows for apparently
valid certifications actually signed by signing subkeys.
Remove --disable-doc from configure options. We pass this options to all
autotools packages.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, the builsystem for uboot defaults to 'legacy', while the
default version is very well capable of using the 'kconfig' buildsystem
instead.
Having the 'legacy' buildsystem be the default in that case makes it
quite inconvenient for users: they would expect to be able to use e.g.
uboot-menuconfig et al. with the default uboot version.
Switch to using 'kconfig' when we use the latest version. Keep the
'legacy' as default for everything else.
Also, invert the 'legacy' and 'kconfig' entries in the choice: it is
nicer to have the recent and future-proof entry first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
More specifically, this branch has recently seen a fix that is needed
for ATF to build properly with recent gcc versions:
c96ec59f8b
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case currently fails to build with:
./build/juno/release/bl1/context_mgmt.o: In function `cm_prepare_el3_exit':
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): undefined reference to `cm_set_next_context'
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): relocation truncated to fit: R_AARCH64_JUMP26 against undefined symbol `cm_set_next_context'
This issue has been fixed upstream in commit
10c252c14b7f446c0b49ef1aafbd5d37804577dd, available since v1.3. So
while we bump, let's bump to the latest version of ATF, v1.5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/64360659
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 5563a1c6a4
("support/check-uniq-files: support weird locales and filenames"), the
'csv' Python module is no longer used by the check-uniq-files.
Due to this, flake8 complains with:
support/scripts/check-uniq-files:4:1: F401 'csv' imported but unused
Fix this by dropping the useless csv import.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The release announcement mentions these security fixes:
Defend against Bellcore glitch attacks by verifying the results of RSA
private key operations.
Fix implementation of the truncated HMAC extension. The previous
implementation allowed an offline 2^80 brute force attack on the HMAC
key of a single, uninterrupted connection (with no resumption of the
session).
Reject CRLs containing unsupported critical extensions.
Fix a buffer overread in ssl_parse_server_key_exchange() that could
cause a crash on invalid input. (CVE-2018-9988)
Fix a buffer overread in ssl_parse_server_psk_hint() that could cause
a crash on invalid input. (CVE-2018-9989)
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't build the static library when BR2_SHARED_LIBS=y, to reduce build
time.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes it is useful to pass some parameters to ModemManager when it
starts (e.g. --log-level). Allow the user add a file with such flags in
a MODEMMANAGER_ARGS variable. This is simpler than overriding the whole
startup script (e.g. by means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since bluez5_utils 5.49, some code using readline was compiled even if
readline was not available. After this issue was reported upstream, a
patch was proposed by an upstream developer to address the issue. This
commit integrates this patch (under review upstream), which fixes the
problem.
Fixes:
http://autobuild.buildroot.net/results/3e266a79acab8b8eb33360f7afbc1cd6db46f7cb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of fcntl.h definitions were missing on OpenRISC in uClibc-ng,
causing build failures such as:
gfile.c: In function 'splice_stream_with_progress':
gfile.c:3017:35: error: 'F_SETPIPE_SZ' undeclared (first use in this function)
buffer_size = fcntl (buffer[1], F_SETPIPE_SZ, 1024 * 1024);
This comit backports a patch that was merged in upstream uClibc-ng,
which addresses this problem.
Fixes:
http://autobuild.buildroot.net/results/182ebbba6c7466b07e965e5120d919cbcf5e9da6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit updates all the pre-built Buildroot toolchains, which have
all been rebuilt with Buildroot as of commit 046c5e2. The initial
motivation for this update is that an upcoming bump of procps-ng uses
fopencookie(), which has only been introduced in musl 1.1.19, which
itself started being used in Buildroot after the 2018.02 release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Older versions of tar (e.g. 1.27.1) incorrectly interpret the escaping
of the regexp separator, and generate broken tarballs.
For example, given the following transform expression:
--transform="s/^\.\//squashfs-e38956b92f738518c29734399629e7cdb33072d3\//"
the resulting paths in the generated tarball would be:
squashfs-e38956b92f738518c29734399629e7cdb33072d3\/
i.e. a directory which last character is indeed a '\'.
We fix that by using a separator which is very unlikely to occur in a
filename.
Fixes:
http://autobuild.buildroot.org/results/742/7427f34e5c9f6d043b0fe6ad2c66cc0f31d2b24f/
and probably a slew of others as well...
Take this opportunity to fix indentation on the following line
(leading spaces, not TABs).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current method of supporting static only build, removal of all lines
that match the SHARED regex from lib/Makefile, is crude and fragile.
Instead, patch lib/Makefile to allow disable of shared libraries.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2a27294e9a ("grub2: force
-fno-stack-protector in CFLAGS"), a fix was made to the grub2 package
to make it build properly even when SSP support is enabled.
However, commit 20a4583ebf ("security
hardening: add RELFO, FORTIFY options") reworked how SSP options are
passed, and they are now passed in CPPFLAGS instead of CFLAGS, making
the fix introduced by 2a27294e9a no
longer operating.
This commit will force no-stack-protector in CPPFLAGS instead of
CFLAGS.
Fixes bug #10961.
Signed-off-by: Tarek El-Sherbiny <tarek_el-sherbiny@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Check:
- the daemon is started;
- a message is collected;
- the daemon does not issue a warning message on startup.
When the .conf file version does not match the package version a warning
message shows up on serial on every boot. This message is generated by
syslog-ng before it is running, so it is not logged to
/var/log/messages. So in order to test the message is generated, restart
the server. It makes the message appears on /var/log/messages (since the
server is already running) where its existence can be easily tested
using grep.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove a runtime warning message about configuration file being too old.
Do the same as commit 3dad25466d "syslog-ng: Bump version header in conf
file to 3.9". Package version of syslog-ng is 3.10.1, so bump version
number in syslog-ng.conf to 3.10.
Also add a comment to avoid the same warning message reappears when the
package is bumped.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a downloaded toolchain doesn't have its binaries
placed directly in a "bin" subfolder (where BuildRoot currently looks
for them).
A common example is the official Raspberry Pi Toolchain
(https://github.com/raspberrypi/tools), which has its binaries in
"arm-bcm2708/arm-linux-gnueabihf/bin".
This commit introduces BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH that defaults
to "bin" and can be changed as needed.
Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework a bit how TOOLCHAIN_EXTERNAL_REL_BIN_PATH is defined.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use lib and lz4 make targets to avoid build of the manual generator, and
the examples. Both of them use the target compiler to build host tools.
Add license files hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patches.
Add upstream patch fixing build with musl libc.
Add license file hash.
Set LDLIBS to TARGET_LDFLAGS for TARGET_LDFLAGS to be added to the link
commands. Makefile does not use the LDFLAGS environment variable. This
fixes static linking.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a repository might be broken, e.g. when a previous
operation was killed or otherwise failed unexpectedly.
We fix that by always initialising the repository, as suggested by
Ricardo. git-init is safe on an otherwise-healthy repository:
Running git init in an existing repository is safe. It will not
overwrite things that are already there. [...]
Using git-init will just ensure that we have the strictly required files
to form a sane tree. Any blob that is still missing would get fetched
later on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
git always look directories up until it finds a repository. In case
the git cache is broken, it may no longer be identified as a repository,
and git will look higher in the directories until it finds one.
In the default conditions, this would be Buildroot's own git tree
(because DL_DIR is a subdir of Buildroot), but in some situations may
very well be any repository the user has Buildroot in, like a
br2-external tree...
So, we force git to use our git cache and never look elsewhere, as
Suggested by Ricardo.
Use GIT_DIR, as it has been there for ages now, while --git-dir was
only introduced later (even if most distros ship an later version),
as suggested by Arnout.
Also fix the one call to git that was not using the wrapper.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some files were missing on the first build of qt53d but added later:
- by qt5base for the plugins because it copies the whole /usr/lib/qt/plugins
directory
- by qt5declarative for the QML modules because it copies the whole
/usr/qml directory
Also, the qt53d examples were not installed if
BR2_PACKAGE_QT5BASE_EXAMPLES was set.
Signed-off-by: Romain Reignier <rom.reignier@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following commit cdb7876f63
("linux-firmware: add Qualcomm video accelerator and GPU firmware
options"), LINUX_FIRMWARE_DIRS can now contain entries with subdirs,
such as "qcom/venus-1.8". Such entries are currently not supported by
the logic in LINUX_FIRMWARE_INSTALL_DIRS.
Indeed the current logic consists in:
- Removing the destination directory
- Copying to the destination directory
Unfortunately, the last step fails if a component of the path leading
to the destination directory does not exist. To overcome this, we
simply add the appropriate mkdir before the copy.
Fixes:
http://autobuild.buildroot.net/results/54cbca90742faf486e59d95b95a0b0494e47b385/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. Buildroot installs both abrmd and its init
script as part of the same package. But if it ever happens for some
reason, the error message from start-stop-daemon should be pretty clear.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the NETWORKMANAGER_BIN variable, which was used only once, by
the full path of the binary file.
Drop the now useless variables prefix, exec_prefix and sbindir.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Drop the MODEMMANAGER_BIN variable, which was never initialized.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits with error code 5 if the
binary doesn't exist, which is silly. Buildroot installs both udevd and
its init script as part of the same package. But if it ever happens for
some reason, the error message "/sbin/udevd: No such file or directory"
in the start case should be pretty clear.
Replace the UDEV_BIN variable, which was used only once, by the full
path of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sqlite3 refuses to be built with -ffast-math (a side effect of -Ofast) when it
falls back to implementing its own isnan() function.
sqlite3.c: In function ‘sqlite3IsNaN’:
sqlite3.c:28554:3: error: #error SQLite will not work correctly with the -ffast-math option of GCC.
To work around this, when -Ofast is used replace with -O3.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we are about to remove the Blackfin architecture, remove the only
defconfig that was using this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes it is useful to pass some parameters to NetworkManager when it
starts (e.g. --log-level) instead of editting NetworkManager.conf. Allow
the user add a file with a NETWORKMANAGER_ARGS variable containing such
flags. This is simpler than overriding the whole startup script (e.g. by
means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove upstream patches:
* 0001-compat.h-introduce-compatibility-header.patch
* 0002-Fix-build-if-DOWNLOAD-is-set-but-no-JSON.patch
Update note about bundled modified version of mongoose 6.11.
Update licenses. Some files are LGPL-2.1+ now. Remove Public Domain as the
relevant bundled sqlite3 code was removed some time age.
Regenerated the .config file by doing:
```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Regenerate patches using git as patch 0002 didn't applu and the others
were fuzzy.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: fix authorship in patches, order of SoB and use git
format-patch -N to avoid numbering]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.
The patch was applied to the zeromq master branch, see:
c971445025
Fixes:
http://autobuild.buildroot.net/results/2b1aaf7e35651f04a9e9d0269e49c1b0bd87ae29/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build issues with MicroBlaze and PPC64 targets are fixed, and the
three patches are upstream.
Signed-off-by: Eugene Tarassov <eugene@largest.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pixie WPS is a C based tool to audit networks against so called "Pixie
Dust" attacks.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- fix license, it's GPL-3.0+
- use PREFIX= instead of prefix= to actually have an effect, and
install in /usr and not /usr/local
- remove reference to PIXIEWPS_SUBDIR, which was never defined, and
was not needed anyway]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For reproducible builds, SOURCE_DATE_EPOCH will be set to the git commit
date if it is not defined in the environment, but this was done by
explicitly using $(TOPDIR)/.git as the git repository, which would not
give the expected result if Buildroot had been put into a subdirectory
of another repository.
This commit removes that restriction, meaning that the default date will
now be the date of the git commit that contains Makefile, regardless of
what level above Makefile the repository is at. This works because the
current directory when the 'git log' command is executed will always be
the directory containing Makefile (it must be, since TOPDIR is set from
CURDIR).
In general this should be a sensible default, and in cases where a
different date is required SOURCE_DATE_EPOCH can be defined in the
environment before invoking make.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The freescale p1025twr and t1040d4rdb defconfigs use a 4.15 series kernel;
specify BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15 accordingly.
This fixes the following build error:
Incorrect selection of kernel headers: expected 4.16.x, got 4.15.x
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit bumps ARC toolchain to arc-2018.03-rc1.
We want to test how new toolchain-rc1 builds packages,
so we can make fixes before release of toolcain.
ARC GNU tools of version arc-2018.03-rc1 bring some quite significant changes like:
* Binutils v2.29.51 with additional ARC patches
* GCC 7.3.1 with additional ARC patches
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch.
Add a patch for fixing static build.
Add license information about the newly introduced libbtrfsutil.
Disable the libbtrfsutil python binding. It does not cross compile
nicely.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
${raw_name} is never defined in dl-wrapper, and therefore the value
passed to the -N option is always empty. This causes a problem for the
'cvs' backend, which uses the value of this option as the CVS module
to be downloaded.
If the name of the CVS module is omitted, all the CVS modules from
that CVS repository are downloaded, which creates a tarball with a lot
more contents, and the actual useful contents in a sub-directory,
obviously breaking patches that should be applied, and the entire
build process that follows.
Fixes:
http://autobuild.buildroot.net/results/fcee0e3d7eeeb373313b1794092c729b1b052348/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes the common post-image.sh script used by Freescale
platforms compatible with arm64:
- Support having DTBs in sub-folders
- Support a kernel image in the 'Image' format
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reaver is a tool to audit networks against brute WPS pins attacks.
We use the github.com/t6x fork at the moment because other
versions/repos of this project won't cross-compile, and this fork is
the only one regularly updated and maintained.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a bugfix release. It contains the following changes since v1.0:
- include Doxyfile in the release tarball
- fix the implicit-fallthrough warnings
- make tests work together with gpio-mockup post v4.16 linux kernel
- use reference counting for line file descriptors to avoid calling
close() on the same descriptors multiple times
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"+=" was missing in -DLLVM_TARGETS_TO_BUILD, so LLVM_CONF_OPTS and
HOST_LLVM_CONF_OPTS before this option weren't being considered.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The /lib/firmware directory contains random firmware for various
devices. It happens that some of them might be or appear to be ELF
files, but they shouldn't be checked by fix-rpath. For example, one of
the Qualcomm VPU firmware file appears to be an ELF file, but patchelf
isn't happy about it:
$ ./output/host/bin/patchelf --print-rpath output/target/lib/firmware/qcom/venus-4.2/venus.b00
patchelf: patchelf.cc:387: void ElfFile<Elf_Ehdr, Elf_Phdr, Elf_Shdr, Elf_Addr, Elf_Off, Elf_Dyn, Elf_Sym>::parse() [with Elf_Ehdr = Elf32_Ehdr; Elf_Phdr = Elf32_Phdr; Elf_Shdr = Elf32_Shdr; Elf_Addr = unsigned int; Elf_Off = unsigned int; Elf_Dyn = Elf32_Dyn; Elf_Sym = Elf32_Sym]: Assertion `shstrtabIndex < shdrs.size()' failed.
Aborted (core dumped)
Even though patchelf definitely shouldn't crash, it anyway doesn't
make sense to check ELF files in /lib/firmware, so let's exclude this
directory from our check.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
AddLLVM.cmake adds $ORIGIN/../lib to the RPATH of llvm binaries. This
causes a problem when llvm-config built for the host, installed in
STAGING_DIR, is executed under the following conditions:
* Target architecture same as host architecture (normally x86_64)
* Target's libc different from host's libc (normally glibc)
llvm-config will try to link with the target's libc, resulting in:
./llvm-config: error while loading shared libraries: libc.so.0: cannot open shared object file: No such file or directory.
To avoid this, we simply add pass
-DCMAKE_INSTALL_RPATH="$(HOST_DIR)/lib" in HOST_LLVM_CONF_OPTS.
Link to discussion:
http://lists.busybox.net/pipermail/buildroot/2018-April/218627.html
Fixes:
http://autobuild.buildroot.net/results/b81c12d529c66a028e2297ea5ce1d6930324fa69/
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license is GPL-3.0+, not GPL-3.0. Indeed all source files have the
mention:
"either version 3 of the License, or (at your option) any later version"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Zynq SoCs are now well supported in the mainline kernel, thus stop
using the Xilinx fork.
As there is not xilinx_zynq defconfig in mainline, use the default
arch config.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extract from log:
output/build/llvm-5.0.1/include/llvm/Support/ConvertUTF.h:203:53:
error: ‘std::wstring’ has not been declared
bool ConvertUTF8toWide(llvm::StringRef Source, std::wstring &Result);
Also propagate dependency to mesa3d
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If SOURCE_DATE_EPOCH is not defined it was given a definition that
caused 'git log' to be executed each time the variable is referenced,
which is not very efficient given that the answer cannot change.
This commit moves the definition of BR2_VERSION_GIT_EPOCH after the
inclusion of Makefile.in (so that GIT is defined) and makes it a
simply expanded variable so that it is only evaluated once.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-1000156: arbitrary command execution in ed-style patches.
Depend on MMU for now, because the patch adds a fork() call. Upstream
later switched to gnulib provided execute(), so this dependency can be
dropped on the next version bump.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of Linux-4.15, cramfs now has a official maintainer again.
Additionally, that person is hosting and maintaining a new version of
cramfs-tools.
Patches 0001-endian.patch and 0003-fix-missing-types.patch are no longer
needed because they have been upstreamed.
However, since patch 0002-cygwin_IO.patch is so old, it is being
removed until someone that needs it can reapply and test it. At
that point, they should submit the changes to the new cramfs-tools
maintainer instead of adding the patches back here.
Please note that cross-endian support for cramfsck is not supported
at this time.
Cc: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit f66952197b ("package/gcc:
remove gcc 4.8"), UCLIBC_EXTRA_CFLAGS no longer exists, and is
therefore always empty.
Passing the Buildroot make variable UCLIBC_EXTRA_CFLAGS into the
UCLIBC_EXTRA_CFLAGS fed into uClibc's make environment therefore no
longer makes sense. Therefore, just pass $(TARGET_ABI).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HOST_GCC_COMMON_WRAPPER_TARGET_FLOAT_ABI variable was incorrectly
used as HOST_GCC_COMMON_WRAPPER_TARGET_FLOATABI_, which would always
be empty.
In practice, this block of code is only used on Blackfin (which has
BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS unset) and Blackfin doesn't use
float-abi, so this block of code is in fact useless. But even if it's
useless, it's better to have it without typos.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d879be3049 enabled the build for non-glibc
toolchains and added a patch from upstream to fix one remaining build issue
with musl.
The upstream patch defines the glibc specific macro `__GLIBC_PREREQ` in
`include/bsd/sys/cdefs.h`, but the patch does not include this header
file in `include/bsd/stdlib.h` which uses the macro.
Upstream did committed an earlier patch which adds this header inclusion
to `include/bsd/stdlib.h`. So, add this upstream patch as well to fix a
build error when building the hcitop tool from the not yet added package
bluez-alsa.
Note, that the upstream patch address the issue that `<sys/cdefs.h>` is
a non-portable header. However, this is not the issue which needs to be
fixed by this patch, but solely the needed inclusion of the
`include/bsd/stdlib.h` header file, to see the definition of
`__GLIBC_PREREQ`.
Backported from: 11ec8f1e5dfa1c10e0c9fb94879b6f5b96ba52dd
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zend_alloc.h defines some macros such as:
Where _estrdup is the actual function implemented by the PHP core. If
this header file is not included, and some code uses estrdup, one ends
up with an undefined reference. This happens when libexpat support is
enabled. This commit adds a PHP patch that fixes this issue. The patch
has been submitted upstream through a Github pull request.
Fixes:
http://autobuild.buildroot.net/results/889d2c1f509c035cd506e36061939bfddc8f1500/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Security fixes since 2.2.12:
- wnpa-sec-2018-15
The MP4 dissector could crash. (Bug 13777)
- wnpa-sec-2018-16
The ADB dissector could crash. (Bug 14460)
- wnpa-sec-2018-17
The IEEE 802.15.4 dissector could crash. (Bug 14468)
- wnpa-sec-2018-18
The NBAP dissector could crash. (Bug 14471)
- wnpa-sec-2018-19
The VLAN dissector could crash. (Bug 14469)
- wnpa-sec-2018-20
The LWAPP dissector could crash. (Bug 14467)
- wnpa-sec-2018-23
The Kerberos dissector could crash. (Bug 14576)
- wnpa-sec-2018-05
The IEEE 802.11 dissector could crash. Bug 14442, CVE-2018-7335
- wnpa-sec-2018-06
Multiple dissectors could go into large infinite loops. All ASN.1 BER dissectors (Bug 14444), along with the DICOM (Bug 14411), DMP (Bug 14408), LLTD (Bug 14419), OpenFlow (Bug 14420), RELOAD (Bug 14445), RPCoRDMA (Bug 14449), RPKI-Router (Bug 14414), S7COMM (Bug 14423), SCCP (Bug 14413), Thread (Bug 14428), Thrift (Bug 14379), USB (Bug 14421), and WCCP (Bug 14412) dissectors were susceptible.
- wnpa-sec-2018-07
The UMTS MAC dissector could crash. Bug 14339, CVE-2018-7334
- wnpa-sec-2018-09
The FCP dissector could crash. Bug 14374, CVE-2018-7336
- wnpa-sec-2018-10
The SIGCOMP dissector could crash. Bug 14398, CVE-2018-7320
- wnpa-sec-2018-11
The pcapng file parser could crash. Bug 14403, CVE-2018-7420
- wnpa-sec-2018-12
The IPMI dissector could crash. Bug 14409, CVE-2018-7417
- wnpa-sec-2018-13
The SIGCOMP dissector could crash. Bug 14410, CVE-2018-7418
- wnpa-sec-2018-14
The NBAP disssector could crash. Bug 14443, CVE-2018-7419
Full release notes:
https://www.wireshark.org/docs/relnotes/wireshark-2.2.14.html
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the ZEROMQ_SITE with the active repository.
Remove the two patches because they were both applied on zeromq.
As a result, the ZEROMQ_AUTORECONF was removed.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of libglib2 to 2.56.0, it fails to build on uClibc with:
gthreadedresolver.c: In function 'do_lookup_records':
gthreadedresolver.c:875:16: error: 'res' undeclared (first use in this function); did you mean '_res'?
res_nclose (&res);
^~~
_res
This commit adds an upstream patch that fixes this problem.
Fixes:
http://autobuild.buildroot.net/results/990e19e3500986263f99354215e33214a2e89116/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a required component to complete the configuration. It also makes sense
to add ubifs so that this board can be flashed with the board/atmel/flasher.sh
script.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support to the flasher.sh script for the at91sam9260-ek board which
complements the existing at91sam9260eknf_defconfig.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This improve the reproducible build.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mention the libunwind dependency as being needed for 'strace
-k' in the Config.in help text, as suggested by Thomas De
Schampheleire.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Include BCM4345C0.hcd for the rpi3 b+
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: rebase on master, use make foreach loop instead of shell for
loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: use make foreach loop instead of shell for loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.14.29 (from 4.9.79)
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: adjusted on top of Yann E. Morin changes to use a tarball
instead of a git clone.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a kernel module from Intel, which could only be
used together with Intel userspace tools provided under NDA, which
also come with the same kernel module. The copy of the kernel module
available on SourceForge is only provided to comply with the GPLv2
requirement. Intel engineers were even surprised it even built and
were not willing to make any effort to fix their tarball naming to
contain a version number. Therefore, it does not make sense for
Buildroot to provide such a package.
See https://sourceforge.net/p/e1000/bugs/589/ for the discussion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove double "only" noticed by Carlos
- fix typo packaged -> package noticed by Romain
- fix check-package warning noticed by Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of using the install of sam-ba under host/opt directly, use the symlink
created in host/bin. The side effect of doing this instead allows the correct
sam-ba binary to be used based on the host arch being 32 bit or 64 bit.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump sama5d3xek to linux4sam_5.8. The 3 foundation components have their tags
changed (AT91Bootstrap, U-Boot, Linux kernel). This requires bumping the kernel
header version and u-boot dtc as well.
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the internal PCRE library of PHP is used, it tries to use a JIT
engine, which is only available on some architectures.
However, the mechanism used to disable JIT has changed in recent PHP
versions, and it now has a proper --without-pcre-jit option. Switch
over to that to properly disable JIT on unsupported platforms.
It has been tested to fix the build of PHP on ARC and Microblaze.
Fixes:
http://autobuild.buildroot.net/results/e1359fcad7bc57e3c5a7ecc37abaa2cf6a6a9ffa/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since c8ef0c03b0 (download: put most of the infra in dl-wrapper), the
backend for local files is now named after the scheme, which is 'file'
for a local file.
>From the same commit on, the directory part and the basename are now
passed separately, to let the backend reconstruct the full path when it
needs to do so, which is the case for the 'file' backend too.
Finaly, ff559846fd (support/download: Add support to pass options
directly to downloaders) introduced a nasty error, as it made use of
"${@}" when calling its internal function. Revert that mess now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the _LICENSE and _LICENSE_FILES variables, that were mistakenly
created with PYTHON_JSONMODELS instead of PYTHON_YIELDFROM
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can drop 0001-Fix-build-with-Linux-kernel-headers-v4.15.patch as it
has been merged upstream, as of commit
a5457d3a1f.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kexec works fine on aarch64, so allow selecting it on that architecture.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Psycopg is the most popular PostgreSQL database adapter for the Python
programming language. Its main features are the complete implementation of the
Python DB API 2.0 specification and the thread safety (several threads can
share the same connection). It was designed for heavily multi-threaded
applications that create and destroy lots of cursors and make a large number of
concurrent INSERTs or UPDATEs.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_POSTGRESQL option depends on BR2_USE_MMU, so the
Config.in comment about the dynamic library dependency should only be
displayed if the BR2_USE_MMU requirement is met.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes
http://autobuild.buildroot.net/results/734/7342b25f01d60cafc4a5422a5a1c282629f361c5/
$(dir does not strip last path separator and the wget wrapper adds a '/'
between the -u argument and the filename when it reconstructs the URL,
leading us to have two slashes before the filename when accessing the
upstream location.
Most upstream servers ignores this, but not all - Leading to download issues
from pypi.
Notice: As pointed out by Arnout, we cannot simply use $(PKG)_SITE here as
_PATCH and _EXTRA_DOWNLOADS may contain full URLs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit "6d938bcb52 download: git: introduce cache feature" introduced a
typo that makes the tarball to contain files without the package
basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0 8 2017-10-14 02:10 ./file
Historically, all tarballs are generated with the basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0 8 2017-10-14 02:10 good-a238b1dfcd825d47d834af3c5223417c8411d90d/file
The hashes in the tree were calculated with the basename.
In the most common scenario, after the download ends the tarball is
generated, the hash mismatches and the download mechanism falls back to
use the tarball from http://sources.buildroot.net .
The problem can be reproduced by forcing the download of any git package
PKG that has a hash file to check against:
$ make defconfig
$ ./utils/config --set-str BR2_BACKUP_SITE ""
$ BR2_DL_DIR=$(mktemp -d) make PKG-dirclean PKG-source
Fix the typo so the basename is really added to the files, that was
clearly the intention of the code.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only one of the two can be selected (they are conflicting virtual
packages) so testing against a single 'y' is enough.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: add sunxi-mali and sunxi-mali-mainline in a single patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Setting EGLFS_DEVICE_INTEGRATION at the end of qmake.conf like is done
by commit 0c219ddb8a doesn't work correctly: it has to be set before the
include(../common/linux_device_post.conf)
Instead of appending to the file, change it into a qmake.conf.in
template file that contains a placeholder for the
EGLFS_DEVICE_INTEGRATION assignment and update it with sed. Since the
sed always has to be executed, this removes the need for a separate
QT5BASE_CONFIGURE_QMAKE_CONFIG definition.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: simplify the replacement, move sunxi-mali support to a
separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some external packages call pg_config to determine the installed PostgreSQL
version. Add this output to Buildroots own pg_config, so these packages
correctly compile.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>From the changelog:
2018-02-28 0.39
* Fixed a security issue with the form module (tx Orange Tsai)
* Fixed a security issue with the db module (tx Adrián Brav and Orange Tsai)
2016-07-08 0.38
..
* Fixed a potential remote exeution risk in `reparam` (tx Adrián Brav)
License files are still not included on pypi, so continue to use the git
repo. Upstream has unfortunately not tagged 0.39, so use the latest commit
on the 0.39 branch. A request to fix this has been submitted:
https://github.com/webpy/webpy/issues/449
0.39 now uses setuptools, so change the _SETUP_TYPE.
Add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
webpy uses hashlib for session handling, so ensure it is available:
web/session.py: import hashlib
web/session.py: sha1 = hashlib.sha1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides LLVM support for Mesa3D, enabling llvmpipe
software rasterizer if Gallium swrast is selected.
In case Gallium r600 is selected, llvm AMDGPU backend is built.
Having llvm installed also enables radeonsi Gallium driver, but
it is not provided with this patch as it hasn't been tested.
It uses llvm-config (host variant) installed in STAGING_DIR/usr/bin
to get LLVM libraries. Assuming that LLVM version 5.0.1 is installed,
llvm-config --libs will output -lLLVM-5.0.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch installs LLVM tools and libraries for the host and
libLLVM.so for the target.
In order to cross-compile LLVM for the target, LLVM
must be installed on the host, or at least llvm-tblgen.
This is necessary as the path to host's llvm-tblgen must
be specified when cross-compiling using the LLVM_TABLEGEN option.
Also, a version of llvm-config that can run on the host will
be required by packages that link with LLVM libraries, so we
need to generate it and install it in STAGING_DIR/usr/bin.
It is important to remark why we need llvm-config(host variant)
installed in STAGING dir. This tool is necessary to build
applications that use LLVM, as it prints the compiler flags,
linker flags and object libraries needed to link against LLVM libs.
More info: https://bugs.chromium.org/p/chromium/issues/detail?id=219369
The original idea was to compile only llvm-tblgen and llvm-config
for the host, as they are the only necessary components. However,
llvm-config tool does not work as expected if it is not linked with
libLLVM.so, so we must also enable LLVM_LINK_LLVM_DYLIB, what builds
LLVM as a single shared library and links LLVM tools with it.
More info: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224847
in comment #11.
If we don't build full LLVM for the host, it would be necessary to
patch configure.ac from mesa3d if we want dynamic linking, because it
uses llvm-config (host variant installed in STAGING_DIR) to get the
necessary LLVM libraries to link with, which has the following problems:
- llvm-config --shared mode outputs static (even if LLVM is built as
one shared library) which leads to link issues with libgallium.
- llvm-config --libs outputs all LLVM tiny libs: -lLLVMLTO,
-lLLVMPasses,etc instead of the single shared library containing
all LLVM components (-lLLVM-5.0)
Mesa tries to execute: llvm-config --link-shared --libs, but this outputs
llvm-config: error: libLLVM-5.0.so is missing.
Given that these problems may arise with other packages that use LLVM,
it is preferable to do a full build for the host. Also, having a
complete installation of LLVM on the host will also facilitate the
integration of Clang front-end, which is going to be added in a future
patch.
As option LLVM_BUILD_LLVM_DYLIB is enabled for the llvm target variant,
a single shared library containing all LLVM components is built.
This option is not compatible with BUILD_SHARED_LIBS, which generates
one .so per library and is only recommended for use by LLVM developers.
Tools and utils are not built for the target. The patch aims to provide
LLVM support for other packages.
The main options needed to cross-compile LLVM are the following ones:
LLVM_TABLEGEN
CMAKE_CROSSCOMPILING
LLVM_DEFAULT_TARGET_TRIPLE
LLVM_HOST_TRIPLE
LLVM_TARGET_ARCH
LLVM_TARGETS_TO_BUILD
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- add dependency on thread and C++ and update the Config.in comment
accordingly.
- make the Config.in comment depend on BR2_PACKAGE_LLVM_ARCH_SUPPORTS
so that it isn't disabled on architectures where LLVM is anyway not
supported.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new column in the HTML output containing the
current version of a package in Buildroot. As such, it isn't terribly
useful, but combined with the latest upstream version added in a
follow-up commit, it will become very useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the following options to the pkg-stats-new script:
-n, to specify a number of packages to parse instead of all packages
-p, to specify a list of packages (comma-separated) to parse instead
of all packages
These options are basically only useful when debugging/developing
this script, but they are very useful, because the script is rather
slow to run completely with all 2000+ packages, especially once
upstream versions will be fetched from release-monitoring.org.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new version of the pkg-stats script, rewritten in
Python. It is for now implemented in a separate file called,
pkg-stats-new, in order to make the diff easily readable. A future
commit will rename it to pkg-stats.
Compared to the existing shell-based pkg-stats script, the
functionality and output is basically the same. The main difference is
that the output no longer goes to stdout, but to the file passed as
argument using the -o option. This allows stdout to be used for more
debugging related information.
The way the script works is that a first function get_pkglist()
returns a list of Package objects. Then, the function
package_init_make_info() uses 'make printvars' to gather information
about all packages, stored as class variables in the Package
class. Then, we iterate over all packages, and use various methods of
the Package class to retrieve all details about the package:
infrastructure, presence of hash file, presence of license
information, etc.
calculate_stats() then calculates global statistics (how packages have
license information, how packages have a hash file, etc.). Finally,
dump_html() produces the HTML output, using a number of sub-functions.
One improvement over the shell-based version is that we can use
regexps to exclude some .mk files. Thanks to this, we can exclude all
linux-ext-*.mk files, avoiding incorrect matches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Drop patch 0004 as it is already applied upstream.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the BR2_DL_DIR is a mountpoint (presumably shared between various
machine, or mounted from the local host when running in a VM), it is
possible that it does not support hardlinks (e.g. samba, or the VMWare
VMFS, etc...).
If the hardlink fails, fallback to copying the file. As a last resort,
if that also fails, eventually fallback to doing the download.
Note: this means that the dl-wrapper is no longer atomic-safe: the code
suffers of a TOCTTOU condition: the file may be created in-between the
check and the moment we try to ln/cp it. Fortunately, the dl-wrapper is
now run under an flock, so we're still safe. If we eventually go for a
more fine-grained implementation, we'll have to be careful then.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit 514291f39e (packages: use new $($PKG)_DL_DIR) variable) strangely
enough removed the PYTHON_KEYRING_SITE line, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/b4a/b4af0de4ae9630ccbe7890f69047f216f2ff5119/
With the change to the DOWNLOAD macro, packages using FOO_ACTUAL_SOURCE_TARBALL fails:
>>> skeleton-init-common Collecting legal info
sourceryg++-2017.05-4-nios2-linux-gnu.src.tar.bz2: OK (md5: 529a7fecf33d0d113a446413b9d1e173)
sourceryg++-2017.05-4-nios2-linux-gnu.src.tar.bz2: OK (sha256: 6e65878d0453708ee19098d3d68985bda244938d35999f3859915a2f5574fa08)
/bin/bash: line 1: @mkdir: command not found
package/pkg-generic.mk:148: recipe for target '/accts/mlweber1/rclinux/rc-buildroot-test/scripts/instance-1/output/build/toolchain-external-codesourcery-niosII-2017.05-4/.stamp_actual_downloaded' failed
Which is caused by the continuation character '\'. This has been present
since the make target was introduced in commit eace9d6133
(core/legal-info: ensure legal-info works in off-line mode). It isn't clear
to me why it was done like that, but it fails with the DOWNLOAD macro
rework, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A backport of the `yield from` semantic from Python 3.x to Python 2.7.
Can be useful for both host and target packages.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The infrastructure only provides HOST_ZYNQ_BOOT_BIN_DL_DIR, because this
package is host only. Ideally the infra should provide ZYNQ_BOOT_BIN_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_TI_CGT_PRU_DL_DIR, because this
package is host only. Ideally the infra should provide TI_CGT_PRU_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_RUST_BIN_DL_DIR, because this
package is host only. Ideally the infra should provide RUST_BIN_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_CRYPTOPP_DL_DIR, because this
package is host only. Ideally the infra should provide CRYPTOPP_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_CARGO_DL_DIR, because this
package is host only. Ideally the infra should provide CARGO_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If one runs "make host-sam-ba" from a clean build, sam-ba.mk cannot
create its symbolic link because $(HOST_DIR)/bin doesn't exist. So
let's create this directory.
>>> host-sam-ba 2.16 Installing to host directory
mkdir -p /buildroot/output/host/opt/sam-ba/
cp -a /buildroot/output/build/host-sam-ba-2.16/* /buildroot/output/host/opt/sam-ba/
ln -sf ../opt/sam-ba/sam-ba_64 /buildroot/output/host/bin/sam-ba
ln: failed to create symbolic link '/buildroot/output/host/bin/sam-ba': No such file or directory
make[1]: *** [package/pkg-generic.mk:234: /buildroot/output/build/host-sam-ba-2.16/.stamp_host_installed] Error 1
make: *** [Makefile:79: _all] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to hostapd's defconfig file, ACS is currently only supported
through the nl80211 driver. Search through the source code also confirms
that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an
attempt to use ACS with other drivers by setting a wireless channel to 0
results in a runtime failure (driver doesn't accept this value). So we
might save a user from selecting a meaningless combination by making ACS
dependent on nl80211.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the wired driver. Add configuration options to select
which drivers to build. Select DRIVER_NONE if no other drivers enabled
(this may be the case when building hostapd as a standalone RADIUS
server).
Update makefile logic and apply wireless-specific options only if at
least one wireless driver enabled. Otherwise, an attempt to build a
wired-only or RADIUS-only hostapd will fail.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now we keep the git clone that we download and generates our tarball
from there.
The main goal here is that if you change the version of a package (say
Linux), instead of cloning all over again, you will simply 'git fetch'
from the repo the missing objects, then generates the tarball again.
This should speed the 'source' part of the build significantly.
The drawback is that the DL_DIR will grow much larger; but time is more
important than disk space nowadays.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For existing setups, the global donload directory may have a lot of the
required archives, so look into there before attempting a download.
We simply hard-link them if found there and not in the new per-package
loaction. Then we resume the existing procedure (which means the new
hardlink will get removed if it happened to not match the hash).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The infrastructure needs to give the 'dl_dir' to the dl-wrapper which in its
turn needs to give it to the helper. It will only be used by the 'git'
helper as of now.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to introduce the cache mechanisms, we need to have a lock on the
$(LIBFOO_DL_DIR), otherwise it would be impossible to do parallel download
(a shared DL_DIR for two buildroot instances) without risking conflicts.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we introduced subdirectories to the DL_DIR, we need to support them
in the PRIMARY and BACKUP mirrors as they evolve to the new tree
structure.
We check first the new URI (with the subdir), and in case of failure, we
check without. By checking both URIs, we ensure that old mirror are usable.
Also, add a missing qstrip call for BR2_BACKUP_SITE.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This per package variable can be used to specify the download
subdirectory used by that package.
The use case here is for example linux-headers and linux, which share
the same sources (because they are the same upstream project), so we
don't want to download twice the kernel, nor store it multiple times
either.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With all the previous changes, we are now ready to add a subdirectory to
the DL_DIR.
The structure will now be DL_DIR/PKG_NAME/{FILE1,FILE2}
This is needed for multiple reasons:
- Avoid patches with name like SHA1.patch laying flat in DL_DIR,
which makes it hard to know to which packages they apply
- Avoid possible collisions if two releases have the same name
(e.g: v01.tar)
- Allow the possibility to handle a git cache per package in the
newly created subdirectory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to Linux kernel version 4.9.59 from the TI SDK 04.02.00.09
(TI SDK release date: 23.12.2017)
Updated uboot to version 2018.01
uEnv.txt corrected to boot from sd card on the ti-am335x-evm
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tarball filename has changed since 5.10. The module suffix
*opensource-src* has changed to *everywhere-src*. I introduced the
*QT5_SOURCE_TARBALL_PREFIX* variable to set the right filename according
to the Qt version.
qtwebengine:
Select libnss. It is a requirement[1] because OpenSSL
certificate validation[2] and NSS bundle[3] was dropped.
Add host-libnss and host-libpng to satisfy new requirement to
build an internal host-tool.
Set ninja host pkg-config tool using environment variable
$GN_PKG_CONFIG_HOST[4]. The build system uses pkg-config to get
package data for both host and target architectures. Using the
same call to pkg-config for both target and host leads to build
mismatches: it tries to link a host-tool using target libraries.
qt5base:
sqlite plugin now uses sqlite3_column_table_name16() so select
BR2_PACKAGE_SQLITE_ENABLE_COLUMN_METADATA to make sure it is
available.
qt5multimedia:
libqgsttools was renamed to libQtMultimediaGstTools. The latter
name matches the libQt5Multimedia*.so.* pattern so no additional
copy command is needed for it anymore.
qt5xmlpatterns:
Names of the license files have changed: LICENSE.(L)GPLv3 ->
LICENSE.(L)GPL3. The new files in fact already existed in 5.9.4
but the old ones were not removed yet. The new files are
slightly different: there used to be a Qt header in front of it
which is now removed. Also LICENSE.LGPL3 is rewrapped.
qt5location, qt5quickcontrols, qt5serialport:
Same license files issue, and for LICENSE.GPLv2 as well.
LICENSE.GPL2 has the "How to Apply These Terms to Your New
Programs" text appended to it.
qt5script:
Similar license file issues, but the new license files were not
present yet. LICENSE.GPLv21 was removed so there is no longer a
license file for the LGPL-2.1-covered Qt code.
[1]: 9b449045fb
[2]: https://codereview.chromium.org/2862543003
[3]: https://codereview.chromium.org/1882433002
[4]: https://github.com/qt/qtwebengine/blob/v5.10.1/src/core/config/linux.pri#L111-L125
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Peter:
- fix sqlite plugin support in qt5base;
- fix target installation of qt5multimedia
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- create a local host-pkg-config tool instead of extending pkgconf;
- pass the same options to host-pkg-config as we do for other packages;
- carry the EGL mesa3d X11 headers patch;
- update license file names and hashes
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The license information in qt5script was just copied from all the other
qt5 modules, but it is different (and complicated).
- libQt5Script itself contains the third-party JavaScriptCore source.
JavaScriptCore has a number of licenses: BSD-2-Clause, BSD-3-Clause,
LGPL-2.0+, LGPL-2.1+. Since it is all linked together, the end
result will be BSD-3-Clause and LGPL-2.1+.
The different BSD licenses are all slightly different (different
authors, which affects the third clause in particular). Only one
separate license file is provided, so let's use that one.
There is an LGPL-2.0 license file, which is slightly different from
the top-level LICENSE.LGPLv21, so let's add that one as well.
- libQt5Script also contains Qt-specific code which is all licensed
under LGPL-2.1 only. This is covered by the LICENSE.LGPLv21 file.
It merges with the LGPL-2.1+ from JavaScriptCore but limits it to
2.1 only.
- libQt5ScriptTools is a separate libary containing just the script
debugger. It is covered by the usual Qt license:
* LGPL-2.1 or LGPL-3.0 with exception for Qt 5.6;
* LGPL-3.0 or GPL-2.0+ for Qt 5.9 (actually it is GPL-2.0 or GPL-3.0
or any later version approved by the KDE Qt foundation, but let's
keep it simple :-). Note that there is no LICENSE.GPLv2 provided,
only LICENSE.GPLv3. Also, there is an LGPL_EXCEPTION.txt file but
no mention of an exception anywhere in the sources.
Update the license information with all of the above. Also add hashes
for the new license files from JavaScriptCore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
At the moment, it means that we make sure that BR2_DL_DIR is created, in
the future, it will make sure that BR2_DL_DIR/PKG_NAME/ is created.
[Peter: drop trailing / on mkdir]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of DL_DIR, the package should now use $(PKG)_DL_DIR to ease the
transition into a new directory structure for DL_DIR.
This commit has been generated with the following scripts:
for i in $(find . -iname "*.mk"); do
if ! grep -q "\$(DL_DIR)" ${i}; then
continue
fi
pkg_name="$(basename $(dirname ${i}))"
[ "${pkg_name}" = "package" ] && continue
raw_pkg_name=$(echo ${pkg_name} | tr [a-z] [A-Z] | tr '-' '_')
pkg_dl_dir="${raw_pkg_name}_DL_DIR"
sed -i "s/\$(DL_DIR)/\$($pkg_dl_dir)/" ${i}
done
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some arguments can be empty, so we need to add single quote around them
But since they are sinple quote; double quote inside them are now not
interpreted by the shell and as such must be removed; hence the use of
qstrip.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The forthcoming "libvirt" package will need a "nc" command with support
for Unix domain sockets in order to permit remote management using the
virt-manager utility. netcat-openbsd provides such command but requires
glibc, so we would not have remote management on uClibc-based systems.
Ncat is a much-improved reimplementation of the venerable Netcat and is
compatible with uClibc and musl. It provides features not available in
the ancient GNU netcat and its Busybox double like IPv6, proxies, and
Unix sockets.
Since 'nmap' itself is a fairly big program (~2.3 MB), we want to be
able to install only ncat. In addition, nmap requires an external
library, pcre.
So this commit adds sub-options to selectively enable/disable the
different programs part of nmap: nmap, nping, ndiff and ncat.
Finally, we symlink 'nc' to ncat if neiter netcat nor netcat-openbsd
is selected, even though ncat does not have the same interface as
netcat-openbsd. However, since Fedora/RHEL install nmap-ncat as 'nc',
it can be assumed that packages that depend on 'nc' know how to deal
with this diversity. For example, the virt-manager package does
that. Also user-supplied scripts can be assumed to do the right thing,
since the user also selects whether nmap-ncat, netcat or
netcat-openbsd is installed.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- don't just handle the ncat case in a special way: create
sub-options for all nmap tools, and use <pkg>_MAKE_OPTS and
<pkg>_INSTALL_TARGET_OPTS to select which ones should be
built/installed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/b18/b187e64a61918f17f69588e2355a03286bc5808e
tar 1.27 subtly changed the tar format when a GNU long link entry is added
(which is done for path elements > 100 characters). The code used to set
the permission mode of the link entry to 0:
header = start_private_header ("././@LongLink", size, time (NULL));
FILL (header->header.mtime, '0');
FILL (header->header.mode, '0');
FILL (header->header.uid, '0');
FILL (header->header.gid, '0');
FILL (header->header.devmajor, 0);
FILL (header->header.devminor, 0);
This got dropped in 1.27 by commit df7b55a8f6354e3 (Fix some problems with
negative and out-of-range integers), so the settings from
start_private_header() are used directly - Which are:
TIME_TO_CHARS (t < 0 ? 0 : min (t, MAX_OCTAL_VAL (header->header.mtime)),
header->header.mtime);
MODE_TO_CHARS (S_IFREG|S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, header->header.mode);
UID_TO_CHARS (0, header->header.uid);
GID_TO_CHARS (0, header->header.gid);
The end result is that tar >= 1.27 sets mode to 644.
The consequence of this is that we create different tar files when long path
names are encountered (which often happens when a package downloads a
specific sha1 from a git repo) depending on the host tar version used,
causing hash mismatches.
As a workaround, bump our minimum tar version to 1.27. It would be nicer to
only do this if we have packages from bzr/git/hg enabled, but that is an
exercise for later.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The goal here is to simplify the infrastructure by putting most of the
code in the dl-wrapper as it is easier to implement and to read.
Most of the functions were common already, this patch finalizes it by
making the pkg-download.mk pass all the parameters needed to the
dl-wrapper which in turn will pass everything to every backend.
The backend will then cherry-pick what it needs from these arguments
and act accordingly.
It eases the transition to the addition of a sub directory per package
in the DL_DIR, and later on, a git cache.
[Peter: drop ';' in BR_NO_CHECK_HASH_FOR in DOWNLOAD macro and swap cd/rm
-rf as mentioned by Yann, fix typos]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently all download helpers accepts the local output file, the remote
locations, the changesets and so on... as positional arguments.
This was well and nice when that's was all we needed.
But then we added an option to quiesce their verbosity, and that was
shoehorned with a trivial getopts, still keeping all the existing
positional arguments as... positional arguments.
Adding yet more options while keeping positional arguments will not be
very easy, even if we do not envision any new option in the foreseeable
future (but 640K ought to be enough for everyone, remember? ;-) ).
Change all helpers to accept a set of generic options (-q for quiet and
-o for the output file) as well as helper-specific options (like -r for
the repository, -c for a changeset...).
Maxime:
Changed -R to -r for recurse (only for the git backend)
Changed -r to -u for URI (for all backend)
Change -R to -c for cset (for CVS and SVN backend)
Add the export of the BR_BACKEND_DL_GETOPTS so all the backend wrapper
can use the same option easily
Now all the backends use the same common options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From ReleaseNotes156:
"""
This is a bugfix release, but it primarily disables the UDP protocol by
default.
In the last few days reports of UDP amplification attacks utilizing
inesure memcached instances have surfaced. Attackers are able to set
large values into memcached, then send requests via spoofed UDP packets.
Memcached will then send a very large number of very large UDP packets
back in response.
"""
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux git trees on github can be huge, and takes a long time to
download, which is not very nice nor convenient for newcomers.
Switch them to using a wget, with the github macro.
A nice side effect of this conversion, is that we no longer need to wait
for the git clone to finish to notice that the ref is gone; doing a wget
will instantly fail in that case.
Mechanical patch, obtained by running (hang-on tight):
$ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*)
olimex_a20_olinuxino_lime_mali had a comment in between, so it was
manually fixed thereafter; that comment was also moved.
Except for socrates_cyclone5 which did not work previously (missing tag
in git tree?), all the affected defconfigs still download their sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch 0001, a different version was applied upstream, please
see upstream PR 82 for details. Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is really annoying since the archive name doesn't contain
the version (iqvlinux.tar.gz), so we have added an
iqvlinux-1.2.0.3.tar.gz tarball on sources.buildroot.net. The package
will try to download iqvlinux-1.2.0.3.tar.gz from the upstream
sourceforge location, which will fail, and then fallback to the backup
mirror, where it will successfully find iqvlinux-1.2.0.3.tar.gz.
Also add hashes for license files.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: don't add custom logic for download, use
iqvlinux-1.2.0.3.tar.gz, which is hosted on sources.buildroot.net.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove both patches (applied upstream), and therefore remove
AUTORECONF = YES.
- Remove --disable-python as python support has been removed
(e144a06bd7)
- Remove lua optional dependency as lua support has been removed
(b52a5bef6f)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pcre configure script does this:
if test "x$with_libpcre_libraries" != "xno"; then
LDFLAGS="${LDFLAGS} -L${with_libpcre_libraries}"
else
LDFLAGS="${LDFLAGS} `pcre-config --libs`"
fi
So if you don't pass --with-libpcre-libraries, it calls pcre-config as
available in the PATH. So it picks up pcre-config from $(HOST_DIR) or
the system, which return results inappropriate for cross-compilation.
So, let's explicitly pass --with-libpcre-includes and
--with-libpcre-libraries to avoid those issues.
Fixes:
http://autobuild.buildroot.net/results/3df11c48c8e2f795f478d1ee666dda9de19133d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release adds a lot of bugfixes for x86_64 and aarch64.
It integrates gettext-tiny useful to be used with libintl stub.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of selecting BR2_PACKAGE_LIBUPNP, select BR2_PACKAGE_LIBUPNP18
if BR2_PACKAGE_LIBUPNP is not enabled
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adding basic support modeled after the Freescale/NXP T1040RDBD4 board.
This target is used to support testing of the bootlin e5500 toolchain.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/c5bb5f978602896179ff9c58ecf4ced40bb96b57
When ncurses is built with wide support, we install libncursesw (plus a
libncurses symlink) but NOT ncursesw.h, only ncurses.h. This combination
confuses the ncmpc build system as it expects a ncursesw.h when it finds
libncursesw:
meson.build:92:4: ERROR: Problem encountered: No ncursesw header found
The ncurses/ncursesw logic in the build system is only used to know what
header file to #include, and what library to link with. As we already
provide a libncurses symlink when building with wide support we can simply
force ncmpc to use the ncurses variant.
[Peter: extend commit message]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mesa's EGL/eglplatform.h header includes X11 headers unless the flag
MESA_EGL_NO_X11_HEADERS is defined[1].
A build issue happens when mesa3d is selected as then OpenGL EGL backend
but the XCB library is not selected. For instance, with this defconfig:
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_FPU_VFPV3D16=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
BR2_PACKAGE_QT5BASE_LINUXFB=y
BR2_PACKAGE_QT5BASE_EGLFS=y
BR2_PACKAGE_QT5WEBKIT=y
Also the odroid-mali EGL backend suffers the same problem.
This commit backports the patch from the Gerrit of Qt which is in
review[5]. It extends the QMAKE_CXXFLAGS with cflags contained in the
egl.pc file.
In this situation, the define MESA_EGL_NO_X11_HEADERS is given to the
compiler that prevent from including the missing X headers.
The issues QTBUG-61712[3] and QTBUG-66233[4] are opened in the Qt
tracker.
Fixes
http://autobuild.buildroot.net/results/8781a561ae1a89e4d70ddaba65d8817eabe3ce69
[1]: 79ee1b2ff0/include/EGL/eglplatform.h (L109-L125)
[2]: https://codereview.qt-project.org/#/c/198906/
[3]: https://bugreports.qt.io/browse/QTBUG-61712
[4]: https://bugreports.qt.io/browse/QTBUG-66233
Cc: Julien CORJON <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The symlink method is faster, since there is no shell fork/exec, and
provides extra space savings.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: use the symlinks method not only for the merged /usr case,
but also in the non-merged case to be consistent, and therefore adjust
the logic that was moving the shell wrappers to a logic that recreates
the symlinks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This brings up error checking at each iteration of the loop for free,
which removes the need for "|| exit 1".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script finds base_dir (= the Buildroot directory) and
cd's into it. To be able to support relative paths as arguments, it
first recalculates the arguments relative to base_dir.
However, if there is a symlink anywhere on the path to the
check-package script, the relative paths will be wrong. To solve this,
use realpath() instead of abspath(), so symlinks are resolved before
calculating the relative path.
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the support for <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends which respectively show the list of all
dependencies or reverse dependencies for a given package. The existing
show-depends and show-rdepends only show the first-level dependencies,
while show-recursive-depends and show-recursive-rdepends show
recursively the dependencies.
It is worth mentioning that while show-recursive-depends really shows
all dependencies, show-recursive-rdepends is a bit limited because the
reverse dependencies of host packages are not properly accounted
for. But that's a limitation that already exists in show-rdepends, and
that cannot easily be solved.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- split from the patch that was also changing graph-depends
- rename show-rrdepends to show-recursive-rdepends
- add show-recursive-depends
- don't create GRAPHS_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
graph-depends currently spits out a graph in .dot format. However, as
part of the upcoming introduction of <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends, we need graph-depends to be able to
display a flat list.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- Rebase on top of graph-depends changes
- Do not display the package name itself in the list, only its
dependencies (or reverse dependencies)
- Display the result on a single line, instead of one package per
line, in order to match what <pkg>-show-depends and
<pkg>-show-rdepends are doing today.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of hardcoded sys.stderr.write() calls. No functional change, but
allows us to easily implement a quiet option.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install the motion.config file were the program expects it to be. From
the motion source code:
snprintf(filename, PATH_MAX, "%s/motion/motion.conf", sysconfdir);
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New options allow to build following components:
* Json
* Redis
* MongoDB
* CppParser
* PDF
This allows to significantly reduce the size of the POCO
libraries. Even though it breaks backward compatibility because those
features were enabled and are now disable by default, Buildroot's
policy is to build the minimal feature-set by default. And users will
get a very clear build failure, which should be easy to fix.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add an explanation about backward compatibility.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
i2pd (I2P Daemon) is a full-featured C++ implementation of I2P
client.
I2P (Invisible Internet Protocol) is a universal anonymous
network layer.
All communications over I2P are anonymous and end-to-end
encrypted, participants don't reveal their real IP addresses.
http://i2pd.website
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Add third patch to not install the license file in /usr/LICENSE and
the source code in /usr/src instead of using a post-install-target
hook to remove /usr/LICENSE and /usr/src. Indeed, we're not sure if
/usr/src contains only stuff installed by this package.
- Clarify the comment that explains why -DTHREADS_PTHREAD_ARG=OFF is
passed, especially because it's only needed for older versions of
CMake, and causes a warning with newer versions of CMake.
- Propagate architecture dependencies to the Config.in comment about
the exception_ptr requirement.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds WTF platform support for the 32-bits armv8-a architectures.
Fixes:
In file included from ./config.h:30:0,
from ...
./wtf/Platform.h:323:6: error: #error "Not supported ARM architecture"
# error "Not supported ARM architecture"
^~~~~
from this defconfig:
BR2_arm=y
BR2_cortex_a72=y
BR2_ARM_FPU_VFPV3D16=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5WEBKIT=y
The patch is an adaptation of an upstream fix in version 5.212 of
qtwebkit[1].
Unfortunately, the commit cannot be backported and has to be fixed since
the toolchain does not define __ARM_ARCH_8__ but __ARM_ARCH_8A__.
$ host/bin/arm-buildroot-linux-gnueabihf-g++ -dM -E - < /dev/null | grep ARM_ARCH
#define __ARM_ARCH_ISA_ARM 1
#define __ARM_ARCH_8A__ 1
#define __ARM_ARCH_PROFILE 65
#define __ARM_ARCH_ISA_THUMB 2
#define __ARM_ARCH 8
#define __ARM_ARCH_EXT_IDIV__ 1
[1]: 35655d5f4b/Source/WTF/wtf/Platform.h (L241-L242)
Cc: Arnout Vandecappelle <arnout@mind.be>
Reported-by: Brock Williams <brock@cottonwoodcomputer.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The graph-depends was not very consistent in colors vs. colours: some
parts were using colours, some parts were using colors.
Let's settle on the US spelling, colors.
This change the user-visble option --colours to --colors, but it is
unlikely that a lot of users customize the colors through
BR2_GRAPH_DEPS_OPTS, so this user interface change is considered
reasonable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends script had no main() function, and the main code was
actually spread between the function definitions, which was a real
mess.
This commit moves the global code into a main() function, which allows
to more easily follow the flow of the script. The argument parsing
code is moved into a parse_args() function.
Most of the global variables are removed, and are instead passed as
argument when appropriate. This has the side-effect that the
print_pkg_deps() function takes a lot of argument, but this is
considered better than tons of global variables.
The global variables that are removed are: max_depth, transitive,
mode, root_colour, target_colour, host_colour, outfile, dict_deps,
dict_version, stop_list, exclude_list, arrow_dir.
The root_colour/target_colour/host_colour variables are entirely
removed, and instead a single colours array is passed, and it's the
function using the colors that actually uses the different entries in
the array.
The way the print_attrs() function determines if we're display the
root node is not is changed. Instead of relying on the package name
and the mode (which requires passing the root package name, and the
mode), it relies on the depth: when the depth is 0, we're at the root
node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some test cases don't use a full build as setup, so split the build()
method into configure() and build().
It allows a test case to perform configuration at the setup stage and
the build inside the test itself.
Call this new method just before build in the BRTest base class, to keep
the current behavior for existing test cases.
This change will be needed when adding a common class to test the git
download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use an empty environment when calling make, but import PATH so the
buildroot tree under test can find binaries from the host machine.
Since environment variables are now ignored, move the handling of
BR2_DL_DIR to the defconfig to keep the current precedence of -d:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: select and add to dependencies good/bad plugins,
enable/disable examples if gtk2/3 with x11 backend is available]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use a normal config option instead of menuconfig, update DEVELOPERS]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like the utilities, it is meant to run on the host machine, hence must
be built using the host toolchain.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows using <PKG>_SRCDIR_OVERRIDE_RSYNC_EXCLUSIONS in local.mk to
skip copying parts of source trees unneeded for building. For example,
when developing WebKitGTK+, it's handy to skip copying all the tests and
other build directories, which are huge:
WEBKITGTK_OVERRIDE_SRCDIR = /home/aperez/WebKit
WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
--exclude JSTests --exclude ManualTests \
--exclude PerformanceTests --exclude WebDriverTests \
--exclude WebKitBuild --exclude WebKitLibraries \
--exclude WebKit.xcworkspace --exclude Websites \
--exclude Examples
This saves a good chunk of time when rsync is used for the first time to
copy the source tree over before building.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: move documentation to the end of the section]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that <pkg>_BINDIR is always "bin", having it as a package variable
doesn't make much sense, so get rid of this variable completely, and
use "bin".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So far, we were using the 'go install' mechanism to build a package
and have its binary installed in
$$($(2)_WORKSPACE)/bin/linux_$$(GO_GOARCH). This worked fine when
building on x86-64 for ARM, but failed when building on x86-64 for
x86-64 because the binaries were installed in $$($(2)_WORKSPACE)/bin/.
Instead of doing some complicated logic to guess whether Go is going
to put our binaries in $$($(2)_WORKSPACE)/bin/ or in
$$($(2)_WORKSPACE)/bin/linux_$$(GO_GOARCH), we revert back to using
"go build", as it was done before the introduction of the golang
package infrastructure. "go build" lets us pass explicitly the
destination path of the binary to be generated.
There's just one complexity with how to decide on the name of the
binary that should be produced, and we have two cases:
- <pkg>_BUILD_TARGETS is the default, i.e ".". In this case we assume
a single binary is produced by "go build", and we name if after the
lower case package name. We allow this to be overridden thanks to
<pkg>_BIN_NAME.
- <pkg>_BUILD_TARGETS is non-default, and typically contains
something like "foo bar" or "cmd/foo cmd/bar". In this case, we
assume the binaries to be produced are "foo" and "bar", i.e we take
the non-directory part of the build target to name the binaries.
Because we're using this -o option, we no longer need to explicitly
create the binary directory, it is done by "go build".
Fixes:
http://autobuild.buildroot.net/results/1f9cd7c48e8c8f41326632a9c0de83915d72c45b/
[Peter: use $(or instead of $(if as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the latest Buildroot Developers meeting, we discussed that
test-pkg would perhaps be more widely used if it tested a smaller
subset of toolchains. Indeed, it currently tests 47 toolchains, which
takes very long to build. Several of the toolchain configurations are
quite similar, and it is perhaps not necessary for contributors to
test them all before submitting a package.
Therefore, this commit changes the test-pkg script to only test a
subset of the toolchain configurations by default. The N first
configurations of the CSV files are tested, where N is hard-coded in
the script. The CSV file has therefore been re-organized to have the
first N toolchains be the most important ones.
A -a/--all option is added to test with all toolchains, while a
-n/--number option is added to test with the first N toolchains, N
being passed on the command line.
Note that the list of toolchains (built in the "toolchains" shell
variable) is no longer sorted. Indeed, when the first N toolchains are
tested, we want them to be tested in the same order as they are listed
in the CSV file, as we are careful to order them in an interesting
order. We only sort when all toolchains are tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reorganizes the toolchain-configs.csv so that the first
toolchains are a subset of "useful" toolchains to be tested by
contributors to validate a package. This subset is the one that will
be used by default by test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 4.6, GCC deprecated -mfused-madd, -ffp-contract=off should
be used for the Xburst workaround.
Tested with the MIPS Sourcery 2011.03 toolchain (based on gcc 4.5),
the toolchain wrapper uses -mno-fused-madd, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2011.03/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-mno-fused-madd'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
And with the MIPS Sourcery 2012.09 toolchain (based on gcc 4.7), the
toolchain wrapper uses -ffp-contract=off, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2012.09/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-ffp-contract=off'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
Fixes the ci20_defconfig build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/60303132
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rework to continue supporting pre-gcc-4.6 toolchains, extend
the commit log after doing more testing.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the situation where the hash is missing from the hash file, the
dl-wrapper downloads the file again and again until the developer
specifies the hash to complete the download step.
To avoid this situation, the freshly-downloaded file is not removed
anymore after a successful download.
After this change, the behaviour is as follows:
- Hash file doesn't exist, or file is in BR_NO_CHECK_HASH_FOR
=> always succeeds.
- Hash file exists, but file is not present
=> file is NOT removed, build is terminated immediately (i.e.
secondary site is not tried).
- Hash file exists, file is present, but hash mismatch
=> file is removed, secondary site is tried.
=> If all primary/secondary site downloads or hash checks fail, the
build is terminated.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout: extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds hackrf/host tools for HackRF, a low cost, open source
Software Defined Radio platform.
Sources of host tools are available on GitHub here:
https://github.com/mossmann/hackrf/tree/master/host
Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[Arnout:
- Rename package to hackrf to match upstream name;
- Reorder dependencies and remove empty line (check-package);
- Use only sha256 hash;
- Add hash for license file;
- Bump to 2018.01.1;
- Use uploaded tarball rather than github-generated one;
- Fix dependencies of comment (|| instead of &&)
- Add UDEV_RULES_GROUP=plugdev in case the build host doesn't have
this group;
- Add patch fixing build without C++ compiler.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Romain Naour, use
QUOTATOOL_INSTALL_TARGET_OPTS to avoid installing man pages, as it
fails due to a bug in the upstream package Makefile]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In current Buildroot, clashes occur between the variables _NAME and
_BASE_NAME for two packages called foo and foo-base, i.e.
Package foo:
FOO_NAME = foo
FOO_BASE_NAME = foo-1.2.3
Package foo-base:
FOO_BASE_NAME = foo-base
FOO_BASE_BASE_NAME = foo-base-4.5.6
where variable FOO_BASE_NAME is clashing between these two packages.
Specific cases where this clash is already existing are:
- alljoyn-base
- alljoyn-tcl-base
- perl-xml-sax-base
The problem is generic and can occur for a number of variables in Buildroot.
A non-exhaustive list:
<pkg>_BASE and <pkg>_BASE_NAME
<pkg>_BASE_NAME and <pkg>_RAW_BASE_NAME
<pkg>_DIR and <pkg>_DL_DIR
<pkg>_VERSION and <pkg>_DL_VERSION
<pkg>_SOURCE and <pkg>_TARGET_SOURCE
<pkg>_INSTALL_IMAGES and <pkg>_TARGET_INSTALL_IMAGES (same for _STAGING and _TARGET)
<pkg>_LICENSE_FILES and <pkg>_MANIFEST_LICENSE_FILES
<pkg>_DEPENDENCIES and <pkg>_FINAL_DEPENDENCIES
One solution is to use another separator than '_' to separate the
package name from the rest of the variable name. For example, a double
underscore:
FOO__NAME
FOO__BASE_NAME
FOO_BASE__NAME
FOO_BASE__BASE_NAME
However, making that change for only this case means that the variable
naming is no longer consistent. And making the change for all variables has
a large impact, also on certain user scripts.
For now, keep it simple, and rename FOO_BASE_NAME into FOO_BASENAME, so that
the variables become:
FOO_NAME
FOO_BASENAME
FOO_BASE_NAME
FOO_BASE_BASENAME
For consistency, also adapt FOO_RAW_BASE_NAME. Since FOO_RAW_BASENAME would
still pose a conflict with a package called 'foo-raw', take the opportunity
to rename it into FOO_BASENAME_RAW instead, which does not pose a conflict
as we have no variable called FOO_RAW.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Post-build/image scripts may need to extract information from Microsoft
Excel (tm) spreadsheet files.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Arnout: add package/Config.in.host entry]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It should be "host gnupg" and not "host-gnupg" to be consistent with
all other Config.in.host options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My goal was to rely on upstreamed features as much as possible, which
means that some bits are only half-baked for now:
- Due to the DTS restructuring in upstream kernel, we require 4.11+. The
latest LTS or CIP kernels do not know about the -Base model.
- Linux has no generic support for SFP cages (yet). It seems that this
has hit the net-next tree in August 2017, but there's been no release
(it's probably targettting 4.14). Also, the merge only included the
required infrastructure; the mvneta driver conversion is not included.
Patches which finalize this exist in Russel King's tree and also in
random vendor trees.
- There's no access to the SPI flash in these versions of
uboot/linux/dts.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Arnout:
- rename to solidrun_clearfog_defconfig;
- specify kernel headers version (default is now 4.15);
- remove ext2 fs size override, the 4 extra MB are not needed;
- U-Boot needs dtc and openssl;
- add comments to defconfig;
- update .gitlab-ci.yml;
- mention in readme.txt that SFP support is missing;
- add Jan to DEVELOPERS.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop 0001-Complete-support-for-MIPS-n32-ABI.patch as it is now upstream and rebase
0002-Makefile.arm-remove-march-flags.patch.
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10856
The SSE_GENERIC target fails to build with a "sgemm_kernel.o: No such file
or directory" error. Several upstream bug reports exist for this:
https://github.com/xianyi/OpenBLAS/issues/502https://github.com/xianyi/OpenBLAS/issues/685
In both cases, upstream suggests using a different target definition
instead. E.G. from issue 685:
You may use NORTHWOOD on x86: make TARGET=NORTHWOOD that uses SSE2
instructions. It's very hard to find non-SSE2 x86 CPUs today. For x86-64
use the PRESCOTT target
So drop the SSE_GENERIC target. The only x86_64 variant we support not
covered by a more specific openblas target is the default variant, nocona
and jaguar.
Nocona was a Xeon variant of the P4 "Prescott" architecture, so use the
PRESCOTT openblas target:
https://en.wikipedia.org/wiki/Xeon#Nocona_and_Irwindale
Jaguar is from the Bobcat family, so use the BOBCAT openblas target:
https://en.wikipedia.org/wiki/List_of_AMD_microprocessors#Bobcat_core_architecture_(APU)
[Peter: add Jaguar as pointed out by Arnout]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the OpenCV3 Python support is enabled with Python 3.x, it builds
properly, and the resulting .so file is built for the target
architecture, but its name is wrong:
output/target/usr/lib/python3.6/site-packages/cv2.cpython-36m-x86_64-linux-gnu.so
This prevents Python 3.x from importing the module:
>>> import cv2
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ModuleNotFoundError: No module named 'cv2'
In order to fix this, we simply need to pass PKG_PYTHON_DISTUTILS_ENV
in the environment. The Python module then gets named:
output/target/usr/lib/python3.6/site-packages/cv2.cpython-36m-arm-linux-gnueabi.so
And can be imported properly:
>>> import cv2
>>>
This solution was suggested by Arnout Vandecappelle in
https://stackoverflow.com/questions/49059035/buildroot-opencv3-python-package-builds-for-the-wrong-target.
With Python 2.x, the module is named just cv2.so so this problem isn't
visible. However, for consistency, we also pass
PKG_PYTHON_DISTUTILS_ENV when building against Python 2.x, by putting
the OPENCV3_CONF_ENV assignment inside the
BR2_PACKAGE_OPENCV3_LIB_PYTHON condition, but outside the
BR2_PACKAGE_PYTHON3/BR2_PACKAGE_PYTHON condition.
Signed-off-by: Sasha Shyrokov <alexander-shyrokov@idexx.com>
[Thomas: extend the commit log, apply the solution to Python 2.x.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/Config.in, package/Config.in.host, package/x11r7/Config.in and
package/kodi/Config.in do not comply with the normal Config.in
indentation rules. However, this violation of the rule is legitimate, so
let's skip them in check-package for this specific indentation check.
This removes the last 2197 remaining warnings on Config.in files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Ricardo: rebase patch to use relative paths passed by the main script,
fix flake8 warnings, add package/Config.* to the list]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The toolchain directory can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the toolchain/ directory.
Ignore this symbol:
- BR_LIBC: defined by the buildroot toolchain, used by gcc-final.mk.
Ignore toolchain/toolchain-external/pkg-toolchain-external.mk as it
declares a package infra and not a package itself.
Ignore toolchain/helpers.mk as it contains only helper functions.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the linux/ directory.
Ignore missing LINUX_EXT_ prefix as the variables for linux extensions
do not use it.
Ignore this symbol:
- LINUX_EXTENSIONS: defined by each linux extension, used by
linux/linux.mk.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The filesystem types can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the fs/ directory.
Ignore fs/common.mk as it declares a package infra and not a package itself.
Register the ROOTFS_ as a valid prefix for variables.
Ignore these symbols:
- PACKAGES_PERMISSIONS_TABLE: defined either by packages through
pkg-generic or by filesystem types, used by fs/common.mk;
- SUMTOOL: defined by package mtd, used by filesystem jffs2;
- TARGETS_ROOTFS: defined by filesystem types, used in the main
Makefile.
Keep using loose checks that warn about common mistakes while keep the
code simple.
As a consequence the check functions do not differentiate between
packages and filesystems so the symbol PACKAGE_UBI would not generate a
warning for the ubi filesystem neither the symbol ROOTFS_MTD would
generate a warning for the mtd package. But those kind of mistakes are
not common and are obvious in the code review, unlike typos i.e.
ROOTFS_UBl or PACKAGE_MID that would be hard to see in the code review.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the boot/ directory.
Ignore boot/barebox/barebox.mk as it declares a package infra and not a
package itself.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rearrange the header of the .mk file so it becomes similar to a header
from a package. It doesn't fit in one line, so split the details to a
comment below the header.
GCONV_LIBS is only used inside this file, so rename it to start with
TOOLCHAIN_, following the namespace convention already used by packages.
Rename the hook COPY_GCONV_LIBS to TOOLCHAIN_GLIBC_COPY_GCONV_LIBS
following the convention used for hooks in packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
toolchain-common.in is a Config.in file with an uncommon name.
It is just included by toolchain/Config.in, and toolchain/Config.in is
not that long, so instead of renaming the file, merge it to
toolchain/Config.in.
Move the raw contents from the file to the exact location it is
currently included in order to not change the order in the menu.
Update the references in the manual as well.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These three symbols:
KERNEL_ARCH_PATH
KERNEL_DTBS
KERNEL_DTS_NAME
are defined and used only inside this file, so use the LINUX_ namespace
for them instead of KERNEL_.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The header of the initramfs.mk file fits in one line, so rearrange it.
Remove consecutive empty line.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
UBINIZE_CONFIG_FILE_PATH is only used inside this file, so rename it to
start with UBI_, following the namespace convention already used by
common packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These directories can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from these directories.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the script only checks files inside the package/ directory.
Upcoming patches will enable it for other directories.
In order to reliably test for file names, i.e. the Config.in in the base
directory, normalize the path of files to check to a relative path to
the base directory.
Rename the variable that holds the compiled regexp to better represent
its content and rearrange how it is declared to make easy to later add
new directories to check. As a consequence the files that declare
package infra types would not be ignored anymore, so create a new
variable to list the files intree to be ignored during the check. The
same variable will be used by upcoming patches to ignore other files.
Ignore pkg-*.mk and doc-asciidoc.mk since they are package infra files.
In order to not produce weird results when used for files outside the
tree (i.e. in a private br2-external) add an explicit command line
option (-b) that bypasses any checks that would make a file be ignored
by the path that contains it.
When in this out-of-tree mode, the user is responsible for providing a
list of files to check that do not contain files the script does not
understand, e.g. package infra files.
As a result of this patch, besides the known use:
$ ./utils/check-package package/new-package/*
someone with the utils/ directory in the path can now also run:
$ cd package/new-package/
$ check-package *
or
$ check-package -b /path/to/br2-ext-tree/package/staging-package/*
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 3a0c20c530 (scanpypi: add support for Python3) adapted the script
to work with python 3.x, but the shebang still said python2 making it
unlikely to work on systems without python 2.x.
Change it to just 'python' instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The nc -> netcat symlink is not created if nc exists already, e.g.
from busybox.
For netcat itself this is not needed, it is always installed.
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It may be necessary if packages become built in parallel, leading to a
race condition on the creation of the "nc" link.
Of course this still leaves a race conditon if other netcat competitors
but we must assume thet the user is a grown-up person who knows what is
doing.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: Don't force-remove the existing nc, not needed according to
Romain.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
https://git.buildroot.net/buildroot/commit/?id=266208972192f1e0869f89d7be941de6294a810a
broke imx support in Kodi because previously the G2D libraries were
part of the imx-gpu-viv package:
CMake Error at /usr/share/cmake-3.7/Modules/FindPackageHandleStandardArgs.cmake:138 (message):
Could NOT find IMX (missing: G2D_LIBRARY)
Adjusting the Kodi package to use the imx-gpu-g2d as well still does
not provide a working build:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'void CIMX::Deinitialize()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:79:21: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'bool CIMX::UpdateDCIC()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:109:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:115:21: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'virtual void CIMX::Process()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:125:19: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:131:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
Although it might be possible to fix these bugs with something like
#define DCIC_IOC_CONFIG_DCIC _IO('D', 12)
#define DCIC_IOC_START_VSYNC _IO('D', 15)
#define DCIC_IOC_STOP_VSYNC _IO('D', 16)
as done in
https://raw.githubusercontent.com/LibreELEC/LibreELEC.tv/libreelec-7.0/projects/imx6/patches/kodi/imx6-jarvis.patch
we would still try to ride a dead horse. The upcoming Kodi version
18.0-Leia will remove imx support completely, see upstream PR 12990.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: keep an explicit -DENABLE_IMX=OFF in CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to imx-vpu-5.4.37/Makefile, line 6:
INCLUDE_LIST:= IMX27ADS IMX51 IMX53 IMX6Q
imx6s is not supported by the imx-vpu package. Its install target,
guarded by
ifeq ($(PLATFORM), $(findstring $(PLATFORM), $(INCLUDE_LIST)))
does nothing, causing a build error later on in the imx-vpuwrap package
checking for vpu_lib.h... no
configure: error: lib_vpu is required, consider installing imx-lib
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since custom dts files are unconditionally handled *KERNEL_USE_CUSTOM_DTS
is no longer available/needed.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Custom dts files are still conditionally copied based on non existing
boolean. So it is currently not possible to use custom dts file(s) at all.
List of dts files is now iterated and files are copied into dedicated kernel arch dir.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When imake is installed on the host, it tries to include
freetype headers from host, so we must override ac_cv_path_IMAKE
to avoid this.
Extract from config.log:
configure:14803: checking if we should use imake to help
configure:14820: result: yes
configure:14829: checking for xmkmf
configure:14846: found /usr/bin/xmkmf
configure:14857: result: /usr/bin/xmkmf
configure:14920: testing Using /usr/bin/xmkmf ...
configure:15015: testing IMAKE_CFLAGS -I. -I/usr/include/freetype2
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas: pass ac_cv_path_IMAKE="" as suggested by Romain Naour.]
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libbsd builds now almost fine with a musl or uClibc toolchain, except
for one issue introduced in the latest version bump. Upstream commit
22fbd62368c39de8ac5e249d1502d5ac0ffdef30 [1] uses the glibc-only macro
`__GLIBC_PREREQ`. The issue is fixed by the attached patch from upstream,
which fixes the use of `__GLIBC_PREREQ` on non-glibc toolchains.
Backported from:
https://cgit.freedesktop.org/libbsd/patch/?id=1f8a3f7bccfc84b195218ad0086ebd57049c3490
netcat-openbsd is the only package selecting libbsd. However, building
it still needs a glibc toolchain, as it uses `b64_ntop` which is not
available in musl or uClibc.
Build has been successfully tested with:
* armv7-eabihf--glibc--bleeding-edge-2017.11-1
* armv7-eabihf--musl--bleeding-edge-2018.02-1
* armv7-eabihf--uclibc--bleeding-edge-2018.02-1
[1] https://cgit.freedesktop.org/libbsd/commit/?id=22fbd62368c39de8ac5e249d1502d5ac0ffdef30
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test to check Python code style in the whole buildroot tree.
Search files by type in order to help flake8 to find the Python scripts
without .py extension. But don't rely only in the output of 'file' as it
uses heuristics and sometimes it is wrong (specially identifying Python
files as C++ source for the 'file' version currently in the Docker
image).
Include in the output:
- the list of Python files processed;
- statistics for each kind of warning;
- the total number of warnings;
- the number of Python files processed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if --enable-static --disable-shared is passed, wine tries to
build a shared library, causing a build failure in a BR2_STATIC_LIBS=y
configuration:
/home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): In function `__uClibc_fini':
__uClibc_main.c:(.text.__uClibc_fini+0x10): undefined reference to `__fini_array_start'
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: /home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): relocation R_386_GOTOFF again
st undefined hidden symbol `__fini_array_start' can not be used when making a shared object
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [libwine.so.1.0] Error 1
make[2]: Leaving directory `/home/test/buildroot/output/build/wine-3.0/libs/wine'
make[1]: *** [libs/wine] Error 2
Since using wine in a static linking environment is fairly unlikely,
we simply mark the wine package unavailable on static-only
configurations.
Since we need to add a Config.in comment, we also introduced a
BR2_PACKAGE_WINE_ARCH_SUPPORTS hidden boolean, to share the
architecture dependencies definition between the wine config option
and the comment.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- add a comment in the Config.in file about the dependency
- add BR2_PACKAGE_WINE_ARCH_SUPPORTS
- extend the commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, if the user specifies the path to an existing directory as
the path to the custom (def)config file (FOO_KCONFIG_FILE), then we
happily create a file in there, either 'defconfig' or '.config' (or
whatever the .config is named for that package), depending on whether
we're saving a defconfig or a full config.
So, we could save the file, but then the Buildroot defconfig file that
contains that path would no longer be reusable as-is, because we
interpret that path as a path to a file.
Furthermore, if the directory-portion of FOO_KCONFIG_FILE does not
exist yet, the update would fail, because cp does not create missing
directory components.
So we fix that by adding an explicit test for the directory-ness of the
target file, and then an explicit mkdir to create missing directory
components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When updating back the (def)config file, the touch command is not very
useful by default, so hide it away.
We do not hide away the cp command, as that could confuse the user under
some circunmstances. For example, when the toolchain does not yet exist,
the uClibc buildsystem will complain multiple times about gcc not being
found, like so:
make[2]: /home/ymorin/dev/buildroot/O/host/bin/i686-buildroot-linux-uclibc-gcc: Command not found
(Note that we can not suppress those warnings, as they are on stderr,
and we still want to see stderr in case of real errors).
So, if we were to hide the cp command, the user could be left confused,
even though we were sucessful in updating back the (def)config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Except for the nice human-friendly reminder of the command that the user
was just running, and the name of the file to copy from, those two rules
are exactly the same.
Make that a common macro that is shared, so that it's easier to add more
checks, and to simplify maintenance.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This was present in Yann's original patch, but got dropped when I rebased
commit 7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to how we do for openssl.
host-luainterpreter is only used by the luarocks infrastructure, and there
is afaik no specific reason why the host lua variant must match the target one.
Luajit only supports a limited number of architectures, so building it for
the host limits the architectures Buildroot can be used on (E.G. powerpc64
autobuilders).
To fix this, always use host-lua. Slightly rework lua.mk to ensure
host-lua-5.1 is used when luajit is selected, and drop the logic for using
host-luajit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#10776
The upstream git repo contains a number of fixes for building against newer
kernel versions, so bump the version.
git shortlog eb66d40310c93dc82bc8eac889744c1ed1f01f7b..
Alain Kalker (2):
uprobe: Print the symbol, not the matching pattern
uprobe: Blacklist uretprobes on _start
Aleksa Sarai (2):
runtime: update GFP_WAIT to GFP_RECLAIM
userspace: fix up argument parsing NULL dereference
Alexey Makhalov (1):
Fix building for v4.8 kernel
Azat Khuzhin (12):
Use get_unused_fd_flags(0) instead of get_unused_fd()
Support trace_seq::seq
Ignore separate debug files (*.dwo)
Use trace_seq_has_overflowed()
makefile: split vim plugins installing into separate target
makefile: use DESTDIR for install (allow to change install dir)
makefile: install: create dirs
makefile: use ldflags for linking ktap
makefile: add CPPFLAGS to KTAPC_CFLAGS, to allow change default flags
ignore: exclude /debian
Support compilation for 4.2 (ftrace_events cleanup)
runtime: fix building on 4.3
Jovi Zhangwei (11):
Merge pull request #84 from azat/linux-3.19-fixes-v3
Merge pull request #85 from azat/debian-preparations-v2
Merge pull request #88 from NanXiao/master
Merge pull request #89 from NanXiao/patch-1
Merge pull request #91 from NanXiao/patch-1
Merge pull request #90 from azat/linux-4.2-compilation-fixes
Merge pull request #99 from cyphar/fix-null-deref
Merge pull request #98 from cyphar/fix-gfp-reclaim
Merge pull request #97 from azat/fix-building-4.3-__GFP_RECLAIM
Merge pull request #103 from ackalker/blacklist
Merge pull request #104 from YustasSwamp/master
Nan Xiao (3):
Update tutorial.md
Update Makefile
Fix memory leak issue in main function.
WEI ZHANG (1):
ktap: Change the copyright to Huawei Technologies
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the pre-fs ones are run on a transient copy of target/, the
post-fs hooks are no longer needed because we no longer need to restore
the target/ directory as it is only a internal copy.
Remove support for the post-fs hooks, and update the sole package using
them.
We do not add a legacy check because this was mostly a purely-internal
detail that was never really exposed nor documented.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, some packages may register hooks to be run just before and
just after the generic tarball image is generated, because they need to
prepare the filesystem for read-only or read-write operation.
However, this means that, if any of the hooks or the image generation
fails, the target directory is left in a dangling, inconsistent state.
We fix that by doing a copy of target/, run the hooks on that copy,
generate the generic tarball image out of that, and get rid of the copy.
This way, we can guarantee consistency of the target directory, and we
can even ditch support for post-fs hooks (those that restore target/).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, some filesystems may want to tweak the content of the target
directory, create special device nodes etc... This all means that:
- the content of the target directory for a specific filesystems may
depend on whether another filesystem is enabled or not; for example,
cpio will create a /init script or symlink and a /dev/console node;
- the filesystems can not be built in parallel, because they may change
the content of the target directory while another is being assembled.
Furthermore, the same fakeroot script is executed over-and-over-again
for each filesystem, to create the device nodes, the users and their
homes and files, and setting permissions...
We introduce an intermediate tarball, for which we do the full fakeroot
shebang.
That tarball then serves as the base for the other filesystems, with a
very simple fakeroot script that untars the common tarball, and calls
the actual filesystem image generator on that.
Note that we use a very simple tar command to generate the intermediate
tarball, because we are not concerned with reproducibility of the
archive itself (only of the archived files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before we can create an intermediate tarball for all filesystems, we
nedd to move the common dependencies needed to generate that
intermediate tarball, rather than leave those dependencies to each
filesystem.
So, we introduce rootfs-common, which gathers all those common
dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... and locate that script in a per-rootfs directory.
Just like for ROOTFS, this variable will leak down the dependency tree to
target-finalize and packages - But it doesn't matter as it isn't used
outside fs/.
[Peter: extend commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like we do for packages with the PKG variable, set ROOTFS to contain the
upper-case name of the rootfs currently being generated.
This will be useful in later patches, when we need more per-rootfs
variables, like a per-rootfs TARGET_DIR for example.
In Makefiles, per-rule variables trickle down the dependency chain, to
all dependencies of that rule, so we have to stop ROOTFS as soon as
we're not in a rootfs. This means we have to stop it at target-finalize
(which is a dependency of all filesystems), and for each package
individually, since some packages (host or target) can be direct
dependencies of filesystems as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new BASE_TARGET_DIR variable is set in stone to point to the real
location where packages will be installed. Its name is modelled after
its definition: it is located in $(BASE_DIR), and it is named 'target/',
hence BASE_TARGET_DIR.
The already-existing TARGET_DIR variable now simply points to the same
location, except that it is recursively expanded, so that we can later
change it depending on the context.
All locations that really need to reference the existing target/
directory, are changed to use BASE_TARGET_DIR; surprinsigly enough, they
all seem to be located in the main Makefile. :-) The rest is left with
using good-old TARGET_DIR.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're soon to introduce a generic variable with that name, i.e.
$(FS_NAME)_TARGET_DIR, so our internal, temporary variable would
clash with it.
Just rename it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we build a cpio filesystem without static devices, we
shoehorn the /dev/console node as if it were specified by a package.
This means that this device is added for all filesystems as well, not
just the cpio. But if we disable cpio, that device is not created for
other filesystems.
This is not very clean, and may break expectations.
Instead, use an explicit mknod as part of the _CMD, as we know it's
going to run under fakeroot.
This is still visible to all filesystems built after cpio, and not to
those built before it, though.
[Peter: ensure /dev exists, simplify comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the pre-gen hooks of the various filesystems are run before
we enter the fakeroot.
However, this precludes those hooks from doing actions that require
root, like creating a pseudo-device or the likes.
So, move those pre-gen hooks under fakeroot.
This has currently no side-effect, as they are still called before
everything else in the fakeroot script, even the system-wide chown call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- adapt to the changes in the golang-package infrastructure
- keep the logic to support BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new infrastructure for golang based packages.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- Rewrap comments to 80 columns.
- Create a global definition of GO_TARGET_ENV.
- <PKG>_GO_ENV is appended to the default env instead of replacing it.
- Add a note to inner-golang-package that only target is supported.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The DOCKER_CONTAINERD_CONFIGURE_CMDS creates a symlink to runc's
source directory, but it does not build depend on runc, which means
that the runc package may not have been extracted/built before
docker-containerd.
Therefore, when doing a build with "make docker-containerd", this
symbolic link is broken, but it doesn't prevent docker-containerd from
building.
Therefore, this symlink is not necessary and can be dropped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If BR2_HOST_DIR is not the default, it can be difficult to find the
host directory (i.e., HOST_DIR always has to be passed explicitly in
addition to the output directory). For example, the Eclipse plugin
assumes that HOST_DIR=BASE_DIR/host.
Create a symlink from $(BASE_DIR)/host to $(HOST_DIR) if it is not the
default. Also remove it in the clean target.
When BR2_HOST_DIR is the default, HOST_DIR_SYMLINK will be empty so
there will be no additional dependency to dirs and nothing to remove
in clean.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10151
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
HOST_DIR is defined twice: once to its default value before .config is
included, and once more to BR2_HOST_DIR after .config is included.
However, the rule that defines the mkdir for HOST_DIR comes between
these two, so it will always use the default definition. Therefore,
if a non-default BR2_HOST_DIR is used, there will be no rule to create
that directory, while the dirs target depends on it.
This happens to work at the moment, because in the dirs target,
$(STAGING_DIR) comes before $(HOST_DIR), so $(HOST_DIR) will be created
implicitly. However, this will fail in top-level parallel builds where
both will be created in parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License info from PyPI is wrong: it is LGPL-2.1+, not GPL-2.0. The
package includes a COPYING file with GPL-2.0, but since it is really
LGPL-2.1+ only the COPYING.LESSER file is relevant.
Signed-off-by: Jaap Crezee <jaap@jcz.nl>
[Arnout: regenerate with scanpypi, fix legal info]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A number of autobuilder failures are due to the fact that autobuilder
instances use old distributions, with old SSL certificates, and
therefore wget aborts with an error "The certificate of `xyz.org' is
not trusted.".
In order to avoid such failures that are not very interesting in the
context of the autobuilders, we pass --no-check-certificate to
wget. The integrity of the downloaded files is anyway verified by the
hashes, and this is only meant to be used in the context of
testing/CI, not in production.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- Fix for inspector DNS rebinding vulnerability (CVE-2018-7160): A malicious
website could use a DNS rebinding attack to trick a web browser to bypass
same-origin-policy checks and allow HTTP connections to localhost or to
hosts on the local network, potentially to an open inspector port as a
debugger, therefore gaining full code execution access. The inspector now
only allows connections that have a browser Host value of localhost or
localhost6.
- Fix for 'path' module regular expression denial of service
(CVE-2018-7158): A regular expression used for parsing POSIX paths could
be used to cause a denial of service if an attacker were able to have a
specially crafted path string passed through one of the impacted 'path'
module functions.
- Reject spaces in HTTP Content-Length header values (CVE-2018-7159): The
Node.js HTTP parser allowed for spaces inside Content-Length header
values. Such values now lead to rejected connections in the same way as
non-numeric values.
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back in 2013, zsh was added to Buildroot [1] with the dependency on
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS. This dependency was keept with the
refactoring [2].
But Busybox doesn't provide a zsh shell in the firt place.
This dependency can be removed.
[1] 3d19b7ef59
[2] 1dbd7b9910
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Phil Eichinger <phil.eichinger@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- remove LIBKRB5_VERSION_MAJOR
- minor tweaks to commit title and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU (well supported via open source
Etnaviv drivers)
* Built-in Wi-Fi/Bluetooth module (RedPine RS-9113)
And as usual we have:
* [micro] SD-card slot
* 2 USB 2.0 ports
* 1Gbit Ethernet port
* Built-in Digilent JTAG probe
* Serial port accessible via micro-USB port
Writing sdcard.img on SDcard creates two partitions:
* FAT32 with uImage and uboot.env
* EXT4 with root filesystem
We modify kernel config because in default hsdk kernel config
CONFIG_INITRAMFS_SOURCE parameter is set and when we build
rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set)
error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which
enables usage of uboot variables in the boot process.
[Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig,
Add defconfig to DEVELOPERS and fixup board/synopsys entry,
Drop postimage script, rename env file in genimage.cfg and drop size
setting for rootfs partition,
Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment]
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need ":0.0 vt01" to make sure Xorg finds the correct terminal.
Quoting https://www.x.org/archive/X11R6.8.0/doc/Xorg.1.html
-allowMouseOpenFail
Allow the server to start up even if the mouse device can't be
opened or initialised.
We need this option in case BR2_PACKAGE_XDRIVER_XF86_INPUT_MOUSE was
not enabled.
-noreset
prevents a server reset when the last client connection is closed.
We need this option to prevent auto-close of Xorg.
Tested with a qemu image and Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: copy an abbreviate version of the explanation above to the
script.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, when a filename contains characters not representable in the
user's locale, we fail hard, especially when the host python is python3.
This is because python2 and python3 handle encoding/decoding strings
differently, with python3 presumable doing the right thing, but it
breaks on some systems, while python2 presumable does the wrong thing,
but it works everywhere. (Just joking, obviously...)
Part of the issue being that the csv reader in python2 is broken with
UTF8.
We fix the issue by ditching the csv reader, and simply read the file in
binary mode, manually partitioning the lines on the first comma.
Then, we use the binary-encoded (really, un-encoded) package names and
filenames as values and keys, respectively.
Finally, for each filename or package we need to print, we try to decode
them with the defaults for the user settings, but catch any decoding
exception and fall back to dumping the raw, binary values. Which codec
is used by default differs between Python version, but in all cases
something sane is printed at least.
Thanks a lot to Arnout for the live help doing this patch. :-)
Reported-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jaap Crezee <jaap@jcz.nl>
[Arnout: commit log improvement]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal
raspberrypi0_defconfig. However, then you don't have support for the
Bluetooth out-of-the-box, which makes using a W a bit pointless.
Therefore, create a separate defconfig for the W. It is a copy of
raspberrypi0_defconfig with the following changes:
- Add DT overlays (from rpi-firmware) to support Bluetooth.
- Pass --add-pi3-miniuart-bt-overlay to post-image.sh.
Since there is now a separate raspberrypi0w_defconfig, the W support
can be removed from raspberrypi0_defconfig.
Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com>
[Arnout:
- Bump to same kernel version as raspberrypi0.
- Remove redundant comment.
- Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y.
- Improve commit log.
- Refresh .gitlab-ci.yml.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit c868095681 ("toolchain: fix
detection of SSP support") fixed the SSP check so that it does the
correct thing for nios2 toolchains. While this commit fixed the
description of the Sourcery NIOSII toolchain, it didn't fix the
description for the autobuilders of the br-nios2-glibc toolchain,
causing some build failures. This commit adjusts br-nios2-glibc.config
to indicate that the toolchain doesn't have SSP support.
Fixes:
http://autobuild.buildroot.net/results/6c44e328b7bffd8474d29d5bdf1ea109ec15f4ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 0.28 ncmpc only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Add a hash for the license file.
Add a nmpc entry for myself in DEVELOPERS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ea9669fffa ("core: kill
DEPENDENCIES_HOST_PREREQ"), the core-dependencies make target was
removed, and is now named just "dependencies".
This broke the utils/genrandconfig script, and this commit intends to
fix that.
Since this script is part of the Buildroot tree, it is provided
together with Buildroot, so we don't need to support the legacy
core-dependencies target. Someone checking out an older Buildroot will
have a working setup, with support/dependencies exposing
core-dependencies and utils/genrandconfig using core-dependencies. The
only broken situation will be between
ea9669fffa and this commit, but that's
not a sufficient reason to add some backward compatibility code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages that use libtool really need some love to be able to
disable C++ support.
This is because libtool will want to call AC_PROG_CXXCPP as soon as CXX
is set non-empty to something different from 'no'. Then, AC_PROG_CXXCPP
will want a C++ preprocessor that works on valid input *and* fail on
invalid input.
So, providing 'false' as the C++ compiler will then require that we do
have a working C++ preprocessor. Which is totally counter-productive
since we do not have a C++ compiler to start with...
bd39d11d2e (core/infra: fix build on toolchain without C++) was a
previous attempt at fixing this, by using the host's C++ preprocessor.
However, that is very incorrect (that's my code, I can say so!) because
the set of defines will most probably be different for the host and the
target, thus causing all sorts of trouble. For example, on ARM we'd have
to include different headers for soft-float vs hard-float, which is
decided based on a macro, which is not defined for x86, and thus may
redirect to the wrong (and missing) header.
Instead, we notice that libtool uses the magic value 'no' to decide that
a C++ compiler is not available, in which case it skips the call to
AC_PROG_CXXCPP.
Given that 'no' is not provided by any package in Debian and
derivatives, as well as in Fedora, we can assume that no system will
have an executable called 'no'. Hence, we use that as a magic value to
disable C++ detection altogether.
Fixes: #10846 (again)
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-tar-unzip-postpone-creation-of-symlinks-with-suspici.patch now upstream.
>From the release notes:
Bug fix release. 1.28.2 has fixes for tcpsvd (fixed fallout from
opt_complementary removal), udhcpd (do not ignore SIGTERM), tar and unzip
(reverted to previous, more permissive symlink handling), ssl_client (fixed
option parsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained,
atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to
linux4sam_5.8. The 3 foundation components have their tags changed
(AT91Bootstrap, U-Boot, Linux kernel).
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Constructed ASN.1 types with a recursive definition could exceed the stack
(CVE-2018-0739)
Constructed ASN.1 types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. This could result in a Denial Of Service attack.
There are no such structures used within SSL/TLS that come from untrusted
sources so this is considered safe.
Incorrect CRYPTO_memcmp on HP-UX PA-RISC (CVE-2018-0733)
Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
effectively reduced to only comparing the least significant bit of each
byte. This allows an attacker to forge messages that would be considered as
authenticated in an amount of tries lower than that guaranteed by the
security claims of the scheme. The module can only be compiled by the HP-UX
assembler, so that only HP-UX PA-RISC targets are affected.
rsaz_1024_mul_avx2 overflow bug on x86_64 (CVE-2017-3738)
This issue has been reported in a previous OpenSSL security advisory and a
fix was provided for OpenSSL 1.0.2. Due to the low severity no fix was
released at that time for OpenSSL 1.1.0. The fix is now available in
OpenSSL 1.1.0h.
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
For more details, see https://www.openssl.org/news/secadv/20180327.txt
The copyright year changed in LICENSE, so adjust the hash to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes (https://lwn.net/Articles/750103/):
E2fsprogs 1.44.0 introduced a regression introduced which caused e2fsck
to fail to support HTree directories on big-endian systems. Fix how we
read block numbers for internal htree nodes.
Removed a potential memory leak from fsck.
E2image now correctly creates e2image files for bigalloc file systems.
Dumpe2fs and debugfs now correctly support e2image files for file
systems that have the meta_bg option enabled.
E2fsck and debugfs now correctly handle delete inodes (including
processing the orphaned inode list in the case of e2fsck) for bigalloc
file systems. (Addresses Google Bug: #73795618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/f1c6494133806b9fc26ae3ce9e9c6a22fa2eda6f/
Commit 6205b75873 (sngrep: gnutls support also needs libgcrypt) ensured
that --with-gnutls is only used when both gnutls and libgcrypt are enabled,
but it didn't ensure libgcrypt gets built before sngrep or told the
configure script where to find libgcrypt-config, breaking the build.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable static build. gawk builds statically just fine. The shared
library check has been removed in 4.1.1.
Remove the symlink force hunk from the no-versioned patch. The only user
of LN is in the part that this patch disables.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix seed variable name for the wait3 system call AC_TRY_RUN test.
Remove manual installation; not needed anymore.
Cc: Will Newton <will.newton@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2017-12627: dereference of a NULL pointer while processing the path
to the DTD.
xerces 3.2.1 includes this patch. But this version also added
AC_RUN_IFELSE to its configure script, making cross compilation harder.
Switching to cmake is also problematic since the minimum required cmake
version is 3.2.0. The host dependencies check currently allows minimum
cmake version 3.1.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lshw is seldomly released, so its data files become easily
outdated. Instead, this commit makes use of the data files provided by
hwdata. This is easily possible because lshw looks for the files in
several directories, including /usr/share/hwdata, where the hwdata
collection is installed.
We remove the entire /usr/share/lshw directory, where the not very
up-to-date data files where installed. Four files were installed
there: pci.ids, usb.ids (which are now provided by hwdata), manuf.txt
and oui.txt (which are not used at run time).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- rework commit log
- replace patch by a simple removal of the /usr/share/lshw directory
- add "runtime" comment in Config.in for the BR2_PACKAGE_LSHW
dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since D-Bus 1.9.18, the recommended location for the system and
session busses configuration files is /usr/share instead of /etc. From
the D-Bus NEWS file:
D-Bus 1.9.18 (2015-07-21)
==
The “Pirate Elite” release.
Configuration changes:
• The basic setup for the well-known system and session buses is now done
in read-only files in ${datadir}, moving a step closer to systems
that can operate with an empty /etc directory. In increasing order
of precedence:
· ${datadir}/dbus-1/s*.conf now perform the basic setup such as setting
the default message policies.
· ${sysconfdir}/dbus-1/s*.conf are now optional. By default
dbus still installs a trivial version of each, for documentation
purposes; putting configuration directives in these files is
deprecated.
· ${datadir}/dbus-1/s*.d/ are now available for third-party software
to install "drop-in" configuration snippets (any packages
using those directories should explicitly depend on at least this
version of dbus).
· ${sysconfdir}/dbus-1/s*.d/ are also still available for sysadmins
or third-party software to install "drop-in" configuration snippets
· ${sysconfdir}/dbus-1/s*-local.conf are still available for sysadmins'
overrides
${datadir} is normally /usr/share, ${sysconfdir} is normally /etc,
and "s*" refers to either system or session as appropriate.
Therefore, this commit adjusts the Avahi package to install the D-Bus
related files to /usr/share/dbus-1/system.d.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Changes v1 -> v2:
- updated kernel and u-boot source repositories to github
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable, like BR2_DL_DIR, is designed to be overridable from the
environment. Unlike BR2_DL_DIR, it is not documented as such in the
Config.in help text. Do so now.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 361d1b969e defines FIRMWARE_DIR for
bluez5_utils. The compatibility symlink for the firmware is no longer
needed.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Ofast (introduced in GCC 4.6) It combines the existing optimization level -O3
with options that can affect standards compliance but result in better optimized
code. For example, -Ofast enables -ffast-math.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upgrading a tweaked configuration is painful, so stay with the
upstream configuration which is already installed, and just apply a
few patches.
Everybody could do its own configuration in its root filesystem
overlay.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: squash patches.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Really fix commit 6729050f3a
That commit added a script to "toolchain" post install staging hooks.
This will only be executed if TOOLCHAIN_INSTALL_STAGING is set to YES.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently there is only logic to enable PAM when linux-pam is selected.
However, busybox will fail to build with PAM enabled if the linux-pam
package has not been built before. So we should forcibly disable PAM in
busybox in that case.
Normally this is not an issue since our default busybox config doesn't
have PAM enabled. However, if you enable linux-pam, then save the
busybox config to a custom configuration file, then disable linux-pam
again, and then do a "make clean; make", the build will fail. A more
practical situation where this can occur is when the same custom
busybox config is used in a Buildroot config with and without
linux-pam.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After commit 6729050f3a nothing creates
$(HOST_DIR)/share/buildroot anymore, causing sdk to fail with:
/bin/bash: .../output/host/share/buildroot/sdk-location: No such file or directory
Add creation of that directory to the "sdk" build steps itself.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of $(HOST_DIR)/usr, the symbolic link from
$(HOST_DIR)/bin/sam-ba/ to $(HOST_DIR)/opt/sam-ba/sam-ba was broken,
so we fix this.
In addition, sam-ba being prebuilt, it comes in two separates
binaries, one for x86 and the other for x86_64, so we take this into
account as well.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
[Thomas:
- add spaces around = signs
- rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following error occures in the udev init script because the kernel config
may optionally not include uevent_helper.
/etc/init.d/S10udev: line 47: can't create /proc/sys/kernel/hotplug: nonexistent directory
Work around this by not trying to access the destination if it's not available.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Download site moved to strace.io. No upstream provided hashes.
Drop the musl specific autoconf seed values. These values are now
detected correctly.
Add --enable-mpers=check to fix configure on aarch64 that does not
support binaries for the compat personality.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.
host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.
In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-ccache dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper package dependency. When
BR2_CCACHE=y, we add host-ccache as a regular dependency of all
packages except:
- The extractor packages host-tar, host-xz and host-lzip
- host-ccache itself
- host-skeleton, because all packages depend on it
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-lzip dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-lzip.mk fills in the
BR2_LZIP_HOST_DEPENDENCY with host-lzip if building a host-lzip is
needed. The name BR2_LZIP_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_LZIP_HOST_DEPENDENCY is added to all packages, except:
- host-lzip, because we would otherwise depend on ourself.
- host-tar, because lzip itself is delivered as a tarball, so we need
to have host-lzip depend on host-tar, and not host-tar depend on
host-lzip
- host-skeleton, because we need to have host-lzip depend on
host-skeleton, and not the opposite.
We also mutually exclude host-lzip and host-xz from dependending on
each other, to avoid a circular dependency.
In addition, we modify lzip.mk to explicitly build host-lzip without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.
[Peter: fix s/host-tar/host-lzip/ typo, fix s/xz/lzip/ typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-xz dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-xz.mk fills in the
BR2_XZ_HOST_DEPENDENCY with host-xz if building a host-xz is
needed. The name BR2_XZ_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_XZ_HOST_DEPENDENCY is added to all packages, except:
- host-xz, because we would otherwise depend on ourself.
- host-tar, because xz itself is delivered as a tarball, so we need
to have host-xz depend on host-tar, and not host-tar depend on
host-xz
- host-skeleton, because we need to have host-xz depend on
host-skeleton, and not the opposite.
In addition, we modify xz.mk to explicitly build host-xz without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.
[Peter: fix s/host-tar/host-xz/ typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-tar dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-tar.mk fills in the
BR2_TAR_HOST_DEPENDENCY variable with host-tar if building a host-tar
is needed. The name BR2_TAR_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_TAR_HOST_DEPENDENCY is added to all packages, except host-tar
itself (obviously) and host-skeleton, because we depend on
host-skeleton to install host-tar properly in HOST_DIR.
In addition, we modify tar.mk to explicitly build host-tar without
ccache: since ccache source code is available as a tarball, ccache
will obviously depend on host-tar if the system tar is insufficient.
Finally, to make things really clean, we also add
$(BR2_TAR_HOST_DEPENDENCY) to the dependencies of the tar filesystem
format, since it requires tar, so we'd better make sure we have a
suitable tar.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extract dependencies are dependencies that must be ready before the
extract step of a package, i.e for tools that are needed to extract
packages themselves. Current examples of such tools are host-tar,
host-lzip and host-xz.
They are currently handled through DEPENDENCIES_HOST_PREREQ. However,
this mechanism has a number of drawbacks:
- First and foremost, because host-tar/host-lzip/host-xz are not
listed in the dependencies of packages, the package infrastructure
does not know it should rsync them in the context of per-package
SDK.
- Second, there is no dependency handling *between* them. I.e, we
have no mechanism that says host-tar should be built before
host-lzip, while it is in fact the case: if you need to build
host-lzip, you need to extract a tarball, so you may need host-tar
if your system tarball is not capable enough.
For those reasons, it makes sense to add explicit support for "extract
dependencies" in the package infrastructure, through the
<pkg>_EXTRACT_DEPENDENCIES variable. It is unlikely this variable will
ever be used by a package .mk file, but it will be used internally by
the package infrastructure.
[Peter: fix typo in manual]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the toolchainfile.cmake and Buildroot.cmake files are
installed outside of any package, just triggered by the toolchain
target.
As part of the per-package SDK effort, we are trying to avoid anything
that installs to the global $(HOST_DIR), and this is one of the
remaining files installed in $(HOST_DIR) outside of any package. We
fix this by installing such files as part of the toolchain package
post-install staging hooks.
Yes, a post-install staging hook to install things to $(HOST_DIR) is a
bit weird, but the toolchain infrastructure is made of target packages
only, and they all install a lot of stuff to $(HOST_DIR) already.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:
- the "usr" symbolic link for backward compatibility
- the "lib" directory, and its lib64 or lib32 symbolic links
This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.
While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.
[Peter: drop host-patchelf reference in commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xfsprogs uses a local definition of struct fsxattr when the kernel
provided one in linux/fs.h is too old. The preprocessor trickery that
allows to include linux/fs.h without colliding with the local
definitions breaks when source files include linux/fs.h on their own.
Add a patch that removes these local includes.
Fixes:
http://autobuild.buildroot.net/results/3aa/3aad812582d94b76d204436d2879bfa732c34da6/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes imximage throws the following error:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6sxsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
Later on, when running mkimage for the u-boot.imx it will succeed in
finding the IVT offset.
Looks like some race condition happening during parallel build when
processing mkimage for u-boot-dtb.imx and u-boot.imx.
A proper fix still needs to be implemented, but as a workaround let's
remove the error when the IVT offset is not found.
It is useful to have such message, especially during bring-up phase,
but the build error that it causes is severe, so better avoid the
build error for now.
The error checking can be re-implemented later when we have a proper
fix.
This workaround has already been applied in mainline U-Boot:
http://git.denx.de/?p=u-boot.git;a=commit;h=b5b0e4e351e20a606de22db6a56ad6bc1e2aa8fd
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/59015347
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0001-Use-z-muldefs-to-avoid-the-multiple-definitions-bug-.patch and
0003-Remove-some-extra-const-that-gcc-complains-about.patch as they are now
upstream.
The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.
Drop dependency on !musl as it is now support since e04281e60cf0d
(makeguids: Ensure compatibility with other libcs).
Drop BINTARGETS workaround as this is fixed since 6c674283697 (Don't build
static by default).
Drop popt dependency as it is no longer needed since 1aec5e7891 (Replace
popt usage with getopt_long in efivar.c).
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
efibootmgr uses host-pkgconf and popt, so explicitly add them to
_DEPENDENCIES instead of relying on them getting pulled in by efivar.
[Peter: reword as suggested by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Leave both _VERSION_MAJOR and _VERSION to reduce churn. We are likely to
need _MAJOR on the next bump.
Drop ac_cv_header_sys_timex_h override; not needed with current
uClibc-ng.
Drop scanf_cv_type_modifier override; not used in configure script since
v2.21.
Drop upstream patch.
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable SSP if the toolchain does not support it. This must be done
explicitly because configure enables hardening by default but doesn't
contain a link test, so it doesn't detect when libssp is missing.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It depends on tpm2-tss, whose current version contains C++ code.
[Peter: add dependency to config option]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 1.4.0 still contains some C++ code. This has already changed on
upstream, so future versions will drop the dependency on a C++ compiler.
[Peter: fix indentation, add dependency to config option]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0001-dont-use-fshort-wchar-when-building.patch and
0003-Remove-extra-const-keywords-gcc-7-gripes-about.patch as they are now
upstream.
The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.
Version 15 introduces build time configuration of the default EFI directory
(E.G. the subdirectory in the EFI system partition where the loader is
installed). This used to be hardcoded to redhat, but now a value must be
specified at build time. Given that, it is unlikely that people relied on
the default value so set it to the more sensible 'buildroot'.
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
powerpc-utils changed upstream git repositories again.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prevent out-of-bounds write in codebook decoding.
Codebooks that are not an exact divisor of the partition size are now
truncated to fit within the partition.
Upstream has migrated from subversion to git, so change to git and bump the
version to include the fix for CVE-2018-5146.
While we're at it, also add a hash file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Use after free when server is disconnected during netsplits. Incomplete fix
of CVE-2017-7191. Found by Joseph Bisch. (CWE-416, CWE-825) -
CVE-2018-7054 [2] was assigned to this issue.
Use after free when SASL messages are received in unexpected order. Found
by Joseph Bisch. (CWE-416, CWE-691) - CVE-2018-7053 [3] was assigned to
this issue.
Null pointer dereference when an “empty” nick has been observed by Irssi.
Found by Joseph Bisch. (CWE-476, CWE-475) - CVE-2018-7050 [4] was assigned
to this issue.
When the number of windows exceed the available space, Irssi would crash due
to Null pointer dereference. Found by Joseph Bisch. (CWE-690) -
CVE-2018-7052 [5] was assigned to this issue.
Certain nick names could result in out of bounds access when printing theme
strings. Found by Oss-Fuzz. (CWE-126) - CVE-2018-7051 [6] was assigned to
this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TPM (Trusted Platform Module) 2.0 CLI tools based on system API of
TPM2-TSS. These tools can be used to manage keys, perform
encryption/decryption/signing/etc crypto operations, and manage
non-volatile storage through a TPM2.0 HW implementation.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a system daemon implementing the TPM2 access broker (TAB) &
Resource Manager (RM) spec from the TCG. The daemon (tpm2-abrmd) is
implemented using Glib and the GObject system.
Communication between the daemon and clients using the TPM is done with
a combination of DBus and Unix pipes. DBus is used for discovery,
session management and the 'cancel', 'setLocality', and 'getPollHandles'
API calls (mostly these aren't yet implemented). Pipes are used to send
and receive TPM commands and responses (respectively) between client and
server.
The daemon owns the com.intel.tss2.Tabrmd name on dbus. It can be
configured to connect to either the system or the session bus.
The package also provides a client library for interacting with the
daemon via TPM Command Transmission Interface (TCTI). It is intended for
use with the SAPI library (libsapi) like any other TCTI.
[Peter: drop add default DAEMON_ARGS to init script, drop /etc/default file,
drop S30devtpmperms and fix permissions in S80tpm2-abrmd]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Improved compliance to the last public review spec and some bug fixes.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Followingig a suggestion from Peter Korsgaard, remove the restriction to
x86 and x86_64. It is preferable to expose the package unless there is a
build time dependency on an architecture or the package is specific to a
certain SoC or board.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the build, we run some instrumentation hooks to gather
statistics about the usage of the target/, staging/ and host/
directories, so that we can generate reports for the user, that
shows:
- for each file, what package installed it,
- for each package,the size that it installed.
In so doing, we run a double md5 pass on all files of the affected
directories (before/after installation). These passes were mostly invisible
when we were only scanning target/, but has greatly increased in time now
that we also scan staging/ and host/ (but only in the corresponding _CMDS,
of course).
This md5 was mostly aimed at catching packages that would "cheat" with
mtime/atime/ctime somehow. They can't really cheat on md5, though [0].
Timings however speak for themselves, with this defconfig (slightly
biggish-but-still-manageable build) [1].
host/ 20965 files 1.2GiB
staging/ 4715 files 333MiB
target/ 1801 files 44MiB
All instrumentation steps, using md5: 19min 27s
All instrumentation steps, using mtime: 14min 45s
No instrumentation step at all: 14min 31s
So, using mtime is an almost-5min improvement, i.e. about 25% faster,
while removing all instrumentation steps does not gain that much more...
So, we switch to using mtime, because in the end that's still good-enough
for our use-case: generating some graphs. It is not mission-critical, and
if a graph is slightly off, that's not a biggy. It can anyway be attributed
to a broken package's buildsystem, which should get fixed.
However, we lose the ability to track directories. Non-empty directories
can be tracked back by a bit of scripting, but empty directories are
simply not caught. If we were to also look for directories using mtime,
we would catch parents of installed files:
- /foo/bar/ exists
- a package installs /foo/bar/buz
- mtime of /foo/bar/ is changed to account for the new file in it.
So we do not track directories at all, and we lose empty directories.
The existing tracking was mostly happenstance, with the original
submission and comments not really accounting for a real use-case.
Now, we also change the way we handle symlinks. Previously, we would
hash the file pointed to by the symlink. Now, we only look at the mtime
of the symlink itself, which still detects modifications.
Eventually, this also means that we now no longer need to establish a
list before the install step; we can now simply run after the install
step, finding any files newer than the build stamp.
[0] Yeah, md5 is very weak, but we're not guarding against malicious
attacks, just about careless modifications.
[1] defconfig used for tests:
BR2_arm=y
BR2_cortex_a7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OSMESA=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_SYSTEMD_JOURNAL_GATEWAY=y
BR2_PACKAGE_SYSTEMD_BACKLIGHT=y
BR2_PACKAGE_SYSTEMD_BINFMT=y
BR2_PACKAGE_SYSTEMD_COREDUMP=y
BR2_PACKAGE_SYSTEMD_FIRSTBOOT=y
BR2_PACKAGE_SYSTEMD_HIBERNATE=y
BR2_PACKAGE_SYSTEMD_IMPORTD=y
BR2_PACKAGE_SYSTEMD_LOCALED=y
BR2_PACKAGE_SYSTEMD_LOGIND=y
BR2_PACKAGE_SYSTEMD_MACHINED=y
BR2_PACKAGE_SYSTEMD_POLKIT=y
BR2_PACKAGE_SYSTEMD_QUOTACHECK=y
BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
BR2_PACKAGE_SYSTEMD_RFKILL=y
BR2_PACKAGE_SYSTEMD_SMACK_SUPPORT=y
BR2_PACKAGE_SYSTEMD_SYSUSERS=y
BR2_PACKAGE_SYSTEMD_VCONSOLE=y
[Peter: tweak commit message, use find -type l]
Reported-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-5146: Prevent out-of-bounds write in codebook decoding.
Drop 0001-CVE-2017-14633-Don-t-allow-for-more-than-256-channel.patch and
0002-CVE-2017-14632-vorbis_analysis_header_out-Don-t-clea.patch as they are
now upstream, and add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enlightenment provide enlightenment.pc and some shared libraries.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The meson build systemd is checking for xkeyboard-config optional
dependency but there is no option to handle it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-rpath was added by m4/lib-link.m4 with autotools based
buildsystem. Now we use meson, we don't have such option anymore.
The autotools eet-eet and eldbus_codegen options are named respectively
eet and eldbus-codegen with meson.
Fixes:
WARNING: Unknown command line options: "eet-eet, eldbus_codegen, rpath"
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop musl patch, which is not necessary anymore as netinet vs linux
header clash is fixed.
Also add hash for the license files.
musl build successfully tested with:
* armv7-eabihf--musl--stable-2017.05-toolchains-1-1
(GCC 5.4.0, Linux headers 3.10.105, musl 1.1.16)
* armv7-eabihf--musl--bleeding-edge-2018.02-1
(GCC 7.3.0, Linux headers 4.9.80, musl 1.1.18)
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-1000120: curl could be fooled into writing a zero byte out of
bounds when curl is told to work on an FTP URL with the setting to only
issue a single CWD command, if the directory part of the URL contains a
"%00" sequence.
https://curl.haxx.se/docs/adv_2018-9cd6.html
CVE-2018-1000121: curl might dereference a near-NULL address when
getting an LDAP URL.
https://curl.haxx.se/docs/adv_2018-97a2.html
CVE-2018-1000122: When asked to transfer an RTSP URL, curl could
calculate a wrong data length to copy from the read buffer.
https://curl.haxx.se/docs/adv_2018-b047.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The `tar` implementation in Busybox 1.28.0 and 1.28.1 won't extract a
rootfs with some symlinks that appear to look "dangerous". This
completely (and silently!) breaks on-target updates via RAUC for me, for
example.
In the meanwhile, upstream already reverted the commit in question
(in their commit a84db18fc71d09e801df0ebca048d82e90b32c6a), so this
patch simply applies that revert in Buildroot. The fix has not made it
to a release, yet.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Bug: https://bugs.busybox.net/show_bug.cgi?id=8411
Bug: https://github.com/rauc/rauc/issues/249
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recently a build failure was reported which was traced back to to the fact
that the user had a TOOLCHAIN_VERSION environment variable set which leads
to a strange looking error message:
toolchain/toolchain/toolchain.mk:40: *** TOOLCHAIN_SITE cannot be empty when
TOOLCHAIN_SOURCE is not. Stop.
Environment variables automatically gets converted to make variables by GNU
make - E.G. from the manual
(https://www.gnu.org/software/make/manual/html_node/Environment.html):
Variables in make can come from the environment in which make is run. Every
environment variable that make sees when it starts up is transformed into a
make variable with the same name and value
So we end up in make with TOOLCHAIN_VERSION set to the value of the
environment variable. As virtual packages do not have a version, there is
no explicit TOOLCHAIN_VERSION = .. line in toolchain.mk overriding this
value, and the logic in package/pkg-generic.mk sets a default value for
TOOLCHAIN_SOURCE when TOOLCHAIN_VERSION is set, and finally errors out as
TOOLCHAIN_SITE isn't set.
As a workaround, explicitly set <pkg>_VERSION and <pkg>_SOURCE to the empty
string in the virtual package infrastructure.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following vulnerabilities:
- CVE-2018-1000098: Crash when parsing SDP with an invalid media format
description
- CVE-2018-1000099: Crash when receiving SDP with invalid fmtp attribute
[Peter: add CVE info]
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script comes from the kernel source, so ignore any code style
warnings for it in order to keep it as close as possible to the original
one, making synchronization between repos easier.
The option --exclude for flake8/pycodestyle is an absolute list and has
a default, so ideally the default values should be added too.
But the use cases for flake8 in the tree are:
- when developing a new script or changing an existing one, the
developer calls flake8 only on that script;
- in the GitLab job, a list of all Python files to be tested is created
and then passed to flake8.
None of these involve calling 'flake8' without parameters, so don't care
about adding the default value.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E501 line too long (138 > 132 characters)
-> isolate the common part of the external toolchain url in a variable
to make the long lines shorter and more readable.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For stop using cma.
git shortlog --invert-grep --grep travis --no-merges 94ccbc8924c12a818d61d36a4b389b74a89fde3c..
Maxime Ripard (1):
mali: Stop using the reserved-memory region to setup the fb area
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host shared libraries produced by CMake were missing a proper
DT_RPATH. That became a problem because the DT_RPATH handling is not
transitive by design.
Consider the following scenario:
- pkg-a provides a library (`liba`) which links to `libpcre`
- pkg-b provides a binary (`foo`) and a shared library (`libb`) which is
needed by that binary
- `libb` links to `liba`
- pkg-a and pkg-b are both built by CMake
In this scenario, `foo` is correctly marked with DT_RPATH pointing to
host/lib/, but that path is not used when (recursively) resolving PCRE's
symbols in `liba`. When attempting to run the `foo` binary, the linker
correctly finds both `liba` and `libb`, but it cannot find the
libpcre.so as built by Buildroot for host.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The change in commit bf73334232 only works
for newer uboot source trees. Add a check that scripts/dtc/libfdt
directory exists before making this change.
[Peter: add comment explaining why]
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
docker-proxy is needed by docker-engine at runtime, and was
previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add docker-proxy package to Buildroot. Needed by docker-engine at
runtime, and previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The T1 QoriQ from NXP has had a few varients of RDB dev boards.
This target is against the latest D4RDB version. Any of the
other versions before D4RDB (plain RDB), may require backing off
the uboot version to SDK 1.6 and/or adjusting the kernel dtb used.
This board configuration provides an upstream kernel build which
has been verified to boot on target.
The target assumes the user still uses the NXP suggested prebuilts
in the SDK2.0 (last release for PowerPC). If a uboot rebuild is
required, the source for SDK2.0 can be found in the following repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replacing the p1010rdb, this board is based on the tower development
system still available by NXP. The board is setup to track upstream
Linux and has been bumped from 4.1 to 4.15 (compared to p1010).
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly indicate that this package is GPL v2.0+ as well as
provide a hash for the source's license file (COPYING).
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the confusing and misleading ts5x00 directory to a real reference
platform name, ts5500. The readme.txt file already states the support
for both TS-5500 and TS-5400 platforms.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the 3.17 kernel used for the Technologic Systems TS-5500 platform
to the latest LTS kernel 4.14.
This fixes the ts5x00_defconfig build with GCC 6.x.
The linux-3.17.config file has been renamed to linux-4.14.config to
match the new kernel version, and its changes are the result of make
linux-update-defconfig. However only comments are affected.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot host programs fail to build when libfdt-devel is installed
system-wide, with errors like this:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit backports an upstream patch that fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libfdt-devel is installed system-wide, the build of U-Boot host
programs currently fails with lots of:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit adds a fixup in the U-Boot code to fix this problem. The
fixup is equivalent to applying upstream commit
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=e0d20dc1521e74b82dbd69be53a048847798a90a,
but we can't use a patch for the uboot package, since people are using
arbitrary versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove mkdata hook as this is not needed since version 1.2.3.
Indeed, when CMAKE_CROSSCOMPILING is defined, ympd will use a perl
script (mkdata.pl) instead of mkdata binary
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssl.match_hostname() function from Python 3.5.
This function IS available in python 2.7 since 2.7.9, but it doesn't support
matching on IP addresses which is needed for some use cases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On older build systems with old coreutils, using relative symbolic link
(ln -r) does not work, and causes failed builds. Workaround is to use
normal symbolic link with a relative path. e.g. ../../$(BINDIR)
This fix is dependent on bumping cups-filters version to 1.20.1 because
of autotools issue with Makefile.am changes.
Fixes:
http://autobuild.buildroot.net/results/77a6369f3530a2a6a055f7fd664f1ad424274d77
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.
This defconfig also hasn't seen any non-mechanical update since
November 2015.
So it's time to get rid of it, in order to remove the following build
failure:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306938
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch description was missing Upstream-Status tag. It was given in the
commit which added this patch but not in the patch itself as should be.
Signed-off-by tag accidentally didn't follow the usual format.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
systemd meson.build uses values from host /etc/login.defs if
system-uid-max and system-gid-max build options are not explicitly
specified.
Avoid that by setting system-uid-max and system-gid-max to 999 which is
the systemd default if SYSTEM_UID_MAX and SYSTEM_GID_MAX are not set in
/etc/login.defs.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable libzstd support explicitly to avoid configure failure. The
Buildroot zstd package does not currently install its library.
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
create_hash_file() used basename(licensefile) when it writes the entry for
the license file in the .hash, which is obviously not correct when license
file is locate in a sub directory.
Instead copy the logic from __create_mk_license() to strip the directory
prefix from the absolute filename instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OSS implementation of the TCG TPM2 Software Stack (TSS2). This stack
consists of the following layers from top to bottom:
* System API (SAPI) as described in the system level API and TPM command
transmission interface specification. This API is a 1-to-1 mapping of
the TPM2 commands documented in Part 3 of the TPM2 specification.
Additionally there are asynchronous versions of each command. These
asynchronous variants may be useful for integration into event-driven
programming environments. Both the synchronous and asynchronous API
are exposed through a single library: libsapi.
* TPM Command Transmission Interface (TCTI) that is described in the
same specification. This API provides a standard interface to transmit
/ receive TPM command / response buffers. It is expected that any
number of libraries implementing the TCTI API will be implemented as a
way to abstract various platform specific IPC mechanisms. Currently
this repository provides two TCTI implementations: libtcti-device and
libtcti-socket. The prior should be used for direct access to the TPM
through the Linux kernel driver. The later implements the protocol
exposed by the Microsoft software TPM2 simulator.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Daniel's address is bouncing and my touch on fbgrab is now the most
recent one.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When verbosive, fbgrab reports pixel format. Green and blue offset and
msb_right fields are accidentally swapped there. This commit adds a patch
which straightens them up.
Upstream-Status: Submitted [Gunnar Monell <gmo@linux.nu>]
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 0.29 MPDs mpc only supports the meson build. Therefore,
adapt the package infrastructure according to the user manual.
Also add a hash for the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 2.13 libmpdclient only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Also add a hash for the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (mostly, out-of-tree) may want to install binary blobs for
another architecture, outside the locations we currently exclude, like
in /opt or whatever...
Add support in check-bin-arch to accept any arbitrary location, that
individual package can each request to excude from the check, when they
are installed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, static libray is always built as BUILD_STATIC_LIBS is ON by
default so correctly set BUILD_STATIC_LIBS depending on BR2_SHARED_LIBS
variable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The GitHub tag is really "libusbgx-0.2.0" so we end up with a slightly
strange looking version and archive name, but this is correct given the
tag.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.
It hasn't been updated since April 2017, and the original submitter,
Fabio Porcedda said:
Unfortunately a newer kernel doesn't boot and I don't have the time
to fix the issue. If having a defconfig that doesn't build on gcc
6.x is unacceptable feel free to remove it.
So, let's get rid of this defconfig, which will remove the following
build error:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306952
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add license hash and fix LICENSE: since November 2016 (release 0.15.2),
libupnpp is licensed under LGPL-2.1+ and not GPL-2.0+
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed or improved security issues:
CVE-2016-1549 (fixed in 4.2.8p7; this release adds protection): A
malicious authenticated peer can create arbitrarily-many ephemeral
associations in order to win the clock selection algorithm
CVE-2018-7182: Buffer read overrun leads to undefined behavior and
information leak
CVE-2018-7170: Multiple authenticated ephemeral associations
CVE-2018-7184: Interleaved symmetric mode cannot recover from bad
state
CVE-2018-7185: Unauthenticated packet can reset authenticated
interleaved association
CVE-2018-7183: ntpq:decodearr() can write beyond its buffer limit
Drop patch #3. libntpq_a_CFLAGS now includes NTP_HARD_CFLAGS via
AM_CFLAGS.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ts4900 defconfig currently fails to build because it selects
kernel headers 4.12, but doesn't specify a kernel version, and
therefore 4.15 is built causing the following error:
Incorrect selection of kernel headers: expected 4.12.x, got 4.15.x
In commit 7c3a7d808e ("configs/ts4900:
bump kernel version to 4.12"), when this defconfig was switched from
using a vendor provided kernel to the mainline kernel, the kernel
version was no longer explicitly specified.
Since this commit indicated 4.12, and the kernel headers version
selected is also 4.12, we also use that as the fixed kernel version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306955
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Wireless support ends up enabling CONFIG_SYSTEM_TRUSTED_KEYRING, which
requires openssl to be available on the host, so disable wireless
support, which isn't needed in Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ORC unwinder requires libelf to be available on the host, so use
the frame pointer unwinder instead. Using the frame pointer unwinder
is probably good enough in our default Qemu configurations.
Wireless support ends up enabling CONFIG_SYSTEM_TRUSTED_KEYRING, which
requires openssl to be available on the host, so disable wireless
support, which isn't needed in Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as CONFIG_UNWINDER_ORC)
require building a host program that needs libelf.
Users who have libelf installed on their system won't see a problem,
but users who don't have libelf installed will get a build
failure. Therefore, this commit adds an option that allows a user to
indicate that his Linux kernel configuration requires libelf. When
this option is enabled, we add host-elfutils to the dependencies of
the linux package (host-elfutils provides the libelf library).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as
CONFIG_SYSTEM_TRUSTED_KEYRING) require building a host program called
extract-cert, which itself needs OpenSSL.
Users having OpenSSL installed on their system won't see a problem,
but users who don't have OpenSSL installed will get a build
failure. This commit adds a new option that allows users to indicate
that their Linux configuration requires building host-openssl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We were passing HOSTCFLAGS="$(HOSTCFLAGS)" to Linux. However:
- HOSTCFLAGS in Buildroot doesn't exist, and is empty, so this
assignment never did anything. The name of the variable in
Buildroot in HOST_CFLAGS.
- HOSTCFLAGS in Linux isn't used everywhere, and passing it overrides
the default HOSTCFLAGS value defined in the main Linux kernel
Makefile.
In addition, there is no way to pass additional host LDFLAGS in the
Linux kernel build system.
Therefore, we simply shoehorn our HOST_CFLAGS and HOST_LDFLAGS while
passing HOSTCC to the Linux kernel build system. This has been tested
to work fine with host OpenSSL and host libelf only available in
$(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable man pages and pdf build to avoid dependency on docbook and
dblatex.
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove also a redundant dot from description text.
Add upstream hashes, and a license file hash.
Cc: Francisco Gonzalez <gzmorell@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to version 2018.01 and kernel to 4.15.7.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig currently fails to build the Linux kernel:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826
In addition, the U-Boot build had already been removed in commit
12c01e4a05
("configs/freescale_mpc8315erdb: remove U-Boot build"), back in
October 2016, and nobody bothered fixing it.
This defconfig was originally contributed and maintained by Gustavo
Zacarias, but he is no longer active in Buildroot, and nobody
expressed interest in this defconfig, so let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I would like to help maintaining the following defconfigs:
imx23evk_defconfig
imx6-sabreauto_defconfig
imx7dpico_defconfig
mx25pdk_defconfig
mx51evk_defconfig
mx53loco_defconfig
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent systemd bump has broken DBus dameon and DBus applications can no
longer find the daemon. So we want to catch those kind of failures
early.
We also want to check that the system as a whole is stable: no unit
should be failed.
Finally, ensure that we can read the jounrnal, even when we are doing our
tricks on read-only systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we handle the factory by redirectoring /var with a symlink at
build time, and with some trickery during the filesystem generation,
depending on whether we need to remount the filesystem read-write or
not.
However, this is causing quite some pain with the latest systemd, now that
they have moved their dbus socket to /run instead of /var/run.
As such, trying to play tricks with /var/run as a symlink is difficult,
because at times it is in .usr/share/factory/var/run (during build) and
then it is in /var/run (at runtime). So a relative symlink is not
possible. But an absolute symlink is not possible either, because we are
installing out-of-tree.
Oh the joys of cross-compilation... :-)
We fix all this mess by making /var a real directory from the onset, so
that we can use the runtime-expected layout even during the build.
Then, during filesystem generation, we move /var away to the factory,
and populate it as we used to do. This still requires a post-fs hook to
restore /var after the filesystem generation.
This leaves a situation that, should the filesystem generation fails,
/var will be left in an inconsistent state. But that is not worse than
what we already had anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a RO root with systemd, it is intended that /var/lib should be
populated at boot time by tmpfiles system mirroring it from
/usr/share/factory/var/lib.
However, this will only happen if /var/lib does not already exist at the
time systemd-tmpfiles runs. If it does exist, then tmpfiles will
(silently) skip it and do nothing.
It turns out /var/lib will exist, because some part of systemd creates
/var/lib/systemd/catalog on boot before tmpfiles runs.
The fix used here is to also create tmpfiles entries for the contents of
/var/lib/* and /var/lib/systemd/*. This way, when those directories
already exist, the entire tree is not skipped and instead the
not-yet-existing contents of /var/lib and /var/lib/systemd will be still
be mirrored from the factory dir.
And if /var/lib/systemd, or a prefix of that, stops getting created and
does not exist, it'll still mirror properly.
It does cause some warnings from systemd:
systemd[1]: Starting Create Volatile Files and Directories...
systemd-tmpfiles[148]: [/etc/tmpfiles.d/var-factory.conf:7] Duplicate line for path "/var/lib/systemd", ignoring.
systemd-tmpfiles[148]: [/etc/tmpfiles.d/var-factory.conf:8] Duplicate line for path "/var/lib/systemd/coredump", ignoring.
But they can be ignored.
IMHO, I think a better solution would be for systemd-tmpfiles to gain a
"merge tree" operation that is like "C" but doesn't abort if the
destination exists, but rather merges the source into it.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[yann.morin.1998@free.fr: slight rework of commit title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages really want to use an UTF-8 locale, or they break.
However, there is no guarantee that any given locale is available on a
system. For example,, while most mainstream distros (Debian and
derivatives, Fedora...) do have the generic, language-agnostic C.UTF-8
locale, Gentoo does not provide it.
So, find the first UTF-8 locale available on the system, and take any
that is available. We however do favour using the user-set current
locale, then using the language-agnostic C.UTF-8, and eventually any
random UTF-8 locale.
Note: we only need to enforce LC_ALL, because setting it implies
everything else:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
1. If the LC_ALL environment variable is defined and is not null,
the value of LC_ALL shall be used.
"""
[Peter: use same regexp as in dependencies.sh]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the UTF-8 locales in mainstream distributions all are suffixed
with just 'utf8', the nomenclature is a bit ambiguous with the way they
are to be specified with the various LC_* variables, suffixed there with
'UTF-8'.
Also, POSIX, ISO, and IEC do not enforce any specific suffix in LC_*
variables:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
If the locale value has the form:
language[_territory][.codeset]
it refers to an implementation-provided locale, where settings of
language, territory, and codeset are implementation-defined.
"""
To avoid any confusion, use a regexp that is a bit more lax when
matching locales.
Also, quote the regexp, so that the '?' and '$' are not interpreted by
the shell.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udevd needs extra groups for its bundled rules:
Mar 03 12:21:30 buildroot systemd-udevd[732]: Specified group 'render' unknown
Mar 03 12:21:30 buildroot systemd-udevd[732]: Specified group 'kvm' unknown
Add those missing groups.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Julius Kriukas <julius@kriukas.lt>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-5732: The DHCP client incorrectly handled certain malformed
responses. A remote attacker could use this issue to cause the DHCP
client to crash, resulting in a denial of service, or possibly execute
arbitrary code. In the default installation, attackers would be isolated
by the dhclient AppArmor profile.
CVE-2018-5733: The DHCP server incorrectly handled reference counting. A
remote attacker could possibly use this issue to cause the DHCP server
to crash, resulting in a denial of service.
Both issues are fixed in version 4.4.1. But we are close to release, so
backport the fixes instead of bumping version.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In particular:
- Explicitly specify the CPU to be used, POWER8, which matches
qemu_ppc64le_pseries_defconfig
- Use hard disk emulation to access the root filesystem instead of an
initrd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu-system-ppc64le doesn't necessarily exist: it isn't installed by
Qemu, and only created as a symlink to qemu-system-ppc64 by some
distributions (Ubuntu). Other distributions (Fedora) just have
qemu-system-ppc64.
But qemu-system-ppc64 is capable of running little-endian PPC64
systems, so use this one instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script support/scripts/check-uniq-files uses the argparse Python
module. In most recent Python versions (starting with 2.7), the
argparse module is part of the standard library, and we already check
for the availability of Python in
support/dependencies/dependencies.sh.
However, when running on an ancient distribution with Python 2.6, the
argparse module is not part of the Python standard library, but
available as an external module. Without this module, the build fails,
because check-uniq-files, which is used in target-finalize, fails to
run.
To avoid this failure, this commit adds a check in
support/dependencies/dependencies.sh to verify that the argparse
module is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using {} in format strings is only supported in sufficiently recent
Python versions. Python 2.6 doesn't support this, and only format
strings with numbered arguments: {0}, {1}, etc.
Python 2.7:
$ python -c 'print("foo {}".format(12))'
foo 12
$ python -c 'print("foo {0}".format(12))'
foo 12
Python 2.6:
$ python -c 'print("foo {}".format(12))'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ValueError: zero length field name in format
$ python -c 'print("foo {0}".format(12))'
foo 12
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Closes#10831
Commit a952d24b9 (qemu_x86_64: use kernel 4.15) bumped the kernel version
but didn't update the kernel header series to match, causing build failures.
[Peter: reworded]
Signed-off-by: Ciro Santilli <ciro.santilli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ecore_con added with efl 1.17 is under MIT license (COPYING.NGINX-MIT)
ector added with efl 1.15 is under FTL license (COPYING.FTL)
While at it, add license file hash.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_REPRODUCIBLE is enabled or host uses non UTF-8 capable locale
building systemd fails with an error:
[1/1080] Generating systemd.bg.catalog with a meson_exe.py custom command.
FAILED: catalog/systemd.bg.catalog
/buildroot/output/host/bin/python3 /buildroot/output/host/bin/meson --internal exe /buildroot/output/build/systemd-236/build/meson-private/meson_exe_sed_232a0623cc7ce2cd67ec72ed784b76307102ed76.dat
Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale.
You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents.
Please switch to a UTF-8 locale for your platform.
...
UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 1079: ordinal not in range(128)
package/pkg-generic.mk:247: recipe for target '/buildroot/output/build/systemd-236/.stamp_built' failed
make: *** [/buildroot/output/build/systemd-236/.stamp_built] Error 1
This patch changes default host system locale from C to C.UTF-8 when
building systemd package to fix this issue. It also introduces
BR2_NEEDS_HOST_C_UTF8_LOCALE flag that checks if this locale is available on
the host system. If locale is not available error message is show and build
process is stopped.
Signed-off-by: Julius Kriukas <julius@kriukas.lt>
[Thomas: use C.UTF-8 instead of en_US.UTF-8.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release of Epoxy makes "0001-Forward-EGL-cflags-into-epoxy.pc.patch"
unnecessary. Other than bugfixes and a couple of functions added to the
API, this release is backwards-compatible with programs built against
the 1.4.x releases.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit baae5156ce (uboot: use local fdt headers) changed the uboot logic
to pass the host include directories with -idirafter instead of -I, so
include files local to u-boot would be preferred over host includes.
This unfortunately breaks configurations using
BR2_TARGET_UBOOT_NEEDS_OPENSSL on hosts with incompatible openssl headers
installed in the system default include directories as explained here:
http://lists.busybox.net/pipermail/buildroot/2018-March/214651.html
The problem is that -idirafter directories gets added to the very end of the
search order, AFTER the system default directories.
Instead use -isystem which causes the directories to be added after -I but
before the system default directories. With this in place, the include
directories of u-boot will first be scanned, followed by the host includes
and finally the system default include directories.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are spacial RF calibration utilities for TI Wilink 18xx
modules.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7651: Unauthenticated clients can send a crafted CONNECT
packet which causes large amounts of memory use in the broker. If multiple
clients do this, an out of memory situation can occur and the system may
become unresponsive or the broker will be killed by the operating system.
The fix addresses the problem by limiting the permissible size for CONNECT
packet, and by adding a memory_limit configuration option that allows the
broker to self limit the amount of memory it uses.
The hash of new tarball is not (yet) available through download.php, so use
a locally calculated hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
systemd-237 slightly changed the README, but the hash was not updated
leading to legal-info failing. Fix it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop IW_MAKE_OPTS, passing the CC, LD, and LDFLAGS in the environment
via TARGET_CONFIGURE_OPTS is enough.
Add license file hash.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes [1]:
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c: In function 'RPI_Create':
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:126:39: error: 'RPI_GLES_DefaultProfileConfig' undeclared (first use in this function); did you mean 'RPI_GLES_DeleteContext'?
device->GL_DefaultProfileConfig = RPI_GLES_DefaultProfileConfig;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RPI_GLES_DeleteContext
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:126:39: note: each undeclared identifier is reported only once for each function it appears in
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c: In function 'RPI_CreateWindow':
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:281:17: error: 'SDL_VideoDevice {aka struct SDL_VideoDevice}' has no member named 'egl_data'; did you mean 'gl_data'?
if (!_this->egl_data) {
^~~~~~~~
gl_data
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:286:10: error: 'SDL_WindowData {aka struct SDL_WindowData}' has no member named 'egl_surface'
wdata->egl_surface = SDL_EGL_CreateSurface(_this, (NativeWindowType) &wdata->dispman_window);
^~
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:286:26: warning: implicit declaration of function 'SDL_EGL_CreateSurface'; did you mean 'SDL_Vulkan_CreateSurface'? [-Wimplicit-function-declaration]
wdata->egl_surface = SDL_EGL_CreateSurface(_this, (NativeWindowType) &wdata->dispman_window);
^~~~~~~~~~~~~~~~~~~~~
SDL_Vulkan_CreateSurface
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:288:14: error: 'SDL_WindowData {aka struct SDL_WindowData}' has no member named 'egl_surface'
if (wdata->egl_surface == EGL_NO_SURFACE) {
^~
[1] http://autobuild.buildroot.net/results/9612d43b192bbb88214a11fe18f8b8da6ad10313
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tvheadend does not build on microblazeel, because of some assertion
failure in binutils:
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: FDE encoding in [...]/lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a(_divdi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: FDE encoding in [...]/lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a(_udivdi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: FDE encoding in [...]/lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a(_umoddi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: BFD (GNU Binutils) 2.29.1 assertion fail elf32-microblaze.c:1494
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: [...]/sysroot/usr/lib/Scrt1.o: probably compiled without -fPIC?
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
Fixes:
http://autobuild.buildroot.org/results/85475885a95f23f3dbc88e5b162108a458233bc4/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-6767: A stack-based buffer over-read in the ParseRiffHeaderConfig
function of cli/riff.c file of WavPack 5.1.0 allows a remote attacker to
cause a denial-of-service attack or possibly have unspecified other impact
via a maliciously crafted RF64 file.
CVE-2018-7253: The ParseDsdiffHeaderConfig function of the cli/dsdiff.c file
of WavPack 5.1.0 allows a remote attacker to cause a denial-of-service
(heap-based buffer over-read) or possibly overwrite the heap via a
maliciously crafted DSDIFF file.
CVE-2018-7254: The ParseCaffHeaderConfig function of the cli/caff.c file of
WavPack 5.1.0 allows a remote attacker to cause a denial-of-service (global
buffer over-read), or possibly trigger a buffer overflow or incorrect memory
allocation, via a maliciously crafted CAF file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The link in /etc/systemd/system/, named dbus-org.bluez.service, pointing to
../../../../usr/lib/systemd/system/bluetooth.service has one too many ".." in
it. Likely the target was copied from the other link in
/etc/systemd/system/bluetooth.target.wants/, which is one level deeper.
Adjust link to be correct.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch to allow systemd to work with old "ln" versions that don't
support --relative didn't work properly in the the meson-add-wants.sh
script.
This results in all the links in systemd's "*.wants" directories being
broken, e.g.
/usr/lib/systemd/system/multi-user.target.wants/getty.target ->
../../../../usr/lib/systemd/system/getty.target
There is one too few ".." in that relative link.
The problem is that the script is called with the link name being either a
file or an existing directory. In the latter case, ln creates the link in
the directory using the name of the target. This means the link is one
level deeper than the relative link making code thinks.
The solution used is to only dirname the link, moving up a level, if it's
not a directory, to mimic ln's logic in how it creates links.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mesa's EGL/eglplatform.h header includes X11 headers unless the flag
MESA_EGL_NO_X11_HEADERS is defined[1].
A build issue happens when mesa3d is selected as then OpenGL EGL backend
but the XCB library is not selected.
This commit tells qmake to pass the cflag MESA_EGL_NO_X11_HEADERS to
make and prevent from including the missing X headers.
The issue QTBUG-66233 is opened in the Qt tracker[1].
Fixes:
In file included from
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/EGL/egl.h:39:0,
from qsgvideonode_egl.h:48,
from qsgvideonode_egl.cpp:40:
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/EGL/eglplatform.h:118:22:
fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
^
compilation terminated.
Makefile:550: recipe for target '.obj/qsgvideonode_egl.o' failed
[1]: 79ee1b2ff0/include/EGL/eglplatform.h (L109-L125)
[2]: https://bugreports.qt.io/browse/QTBUG-66233
[Peter: simplify logic]
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mesa's EGL/eglplatform.h header includes X11 headers unless the flag
MESA_EGL_NO_X11_HEADERS is defined[1].
A build issue happens when mesa3d is selected as then OpenGL EGL backend
but the XCB library is not selected.
This commit tells qmake to pass the cflag MESA_EGL_NO_X11_HEADERS to
make and prevent from including the missing X headers.
The issue QTBUG-66233 is opened in the Qt tracker[1].
Fixes:
In file included from /home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/EGL/egl.h:39:0,
from platform/graphics/opengl/Extensions3DOpenGLES.cpp:33:
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/EGL/eglplatform.h:118:22: fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
^
compilation terminated.
Makefile.WebCore.Target:93596: recipe for target '.obj/platform/graphics/opengl/Extensions3DOpenGLES.o' failed
[1]: 79ee1b2ff0/include/EGL/eglplatform.h (L109-L125)
[2]: https://bugreports.qt.io/browse/QTBUG-66233
[Peter: simplify logic]
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mesa's EGL/eglplatform.h header includes X11 headers unless the flag
MESA_EGL_NO_X11_HEADERS is defined[1].
A build issue happens when mesa3d is selected as then OpenGL EGL backend
but the XCB library is not selected.
This commit tells qmake to pass the cflag MESA_EGL_NO_X11_HEADERS to
make and prevent from including the missing X headers.
The issue QTBUG-66233 is opened in the Qt tracker[1].
Fixes:
In file included from
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/EGL/egl.h:39:0,
from
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/qt5/QtEglSupport/5.10.0/QtEglSupport/private/qt_egl_p.h:65,
from
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/qt5/QtEglSupport/5.10.0/QtEglSupport/private/qeglstreamconvenience_p.h:55,
from
../../../../hardwareintegration/compositor/wayland-egl/waylandeglclientbufferintegration.cpp:56:
/home/gportay/src/buildroot/output-qt5.10/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/EGL/eglplatform.h:118:22:
fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
^
compilation terminated.
Makefile:656: recipe for target
'.obj/waylandeglclientbufferintegration.o' failed
make[8]: *** [.obj/waylandeglclientbufferintegration.o] Error 1
[1]: 79ee1b2ff0/include/EGL/eglplatform.h (L109-L125)
[2]: https://bugreports.qt.io/browse/QTBUG-66233
[Peter: simplify logic]
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
boost 1.66 uses pthread_condattr_setclock in
boost/asio/detail/impl/posix_event.ipp.
Boost is mostly a header-only library, in particular the asio stuff.
There are sub-options for the parts of Boost that are not purely
headers, but there are not any sub-options for the parts of Boost that
are just headers.
So, the options are either to add sub-options to Boost, or to make
Boost as a whole only available on NPTL toolchains. The latter is a bit
annoying as it would mean adding this dependency to all Boost reverse
dependencies, even those not using asio.
So, instead of updating boost, add a dependency to
BR2_TOOLCHAIN_HAS_THREADS_NPTL to domoticz. This is the best solution
that can be done today. It's not perfect, but it's good enough.
Fixes:
- http://autobuild.buildroot.net/results/197baa15cbf7f4fc7b3ccc602515af3f375ed68f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-6360: mpv through 0.28.0 allows remote attackers to execute
arbitrary code via a crafted web site, because it reads HTML documents
containing VIDEO elements, and accepts arbitrary URLs in a src attribute
without a protocol whitelist.
[Peter: Add CVE description]
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0f9c0bf3d5 did a global replace of $(HOST_DIR)/usr/bin to
$(HOST_DIR)/bin. But later, a new occurrence of $(HOST_DIR)/usr/bin snuck
into the sources via commit 05e306d8d3 which added asterisk.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I am leaving Xilinx so to avoid future bounces update my email address
to my personal email address.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Alistair Francis <alistair@alistair23.me>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tar 1.30 changed the --numeric-owner output for filenames > 100 characters,
leading to hash mismatches for the tar archives we create ourselves from
git. This is really a fix for a bug in earlier tar versions regarding
deterministic output, so it is unlikely to be reverted in later versions.
For more details, see:
http://lists.busybox.net/pipermail/buildroot/2018-January/211222.html
To work around this issue, blacklist tar 1.30+ similar to how we do it for
pre-1.17 versions so Buildroot falls back to building host-tar.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-{cmake,lzip,xz} needs host-tar to extract their source code tarball, so
we need to ensure that host-tar gets added to DEPENDENCIES_HOST_PREREQ
before these in case they are both needed, otherwise the tools will fail to
extract.
With the upcoming change to blacklist modern tar versions this situation is
likely to trigger more often.
The real solution to this issue is the <foo>_EXTRACT_DEPENDENCIES rework,
but that series is a bit too intrusive to add this close to 2018.02, so
therefore this hack.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_BINFMT_FLAT configurations require the use of elf2flt. However,
PHP uses -export-dynamic which breaks badly with elf2flt. Even a
simple program fails to build:
$ ./output/host/bin/arm-linux-gcc -Wl,-export-dynamic -o toto toto.c
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: section .junk LMA [0000000000000000,0000000000000027] overlaps section .text LMA [0000000000000000,0000000000006d07]
-export-dynamic is clearly not useful for FLAT configurations, which
are always statically linked, but it's quite a bit of work to change
the PHP build system to use it only conditionall.
It looks more like an interaction bug between gcc (which wants to put
the .text section at address 0x0 in its linker script) and elf2flt,
which wants to put its .junk section (containing the .rel.text stuff)
also at address 0x0.
Fixes (works around) the "section overlap" part of:
http://autobuild.buildroot.net/results/35cbed8927bb10500ecf2816aa728ea240a0be21/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The PHP sockets module now provides access to AI_IDN functionality (by
simply declaring a bunch of constants available from PHP code). AI_IDN
(internationalized domain names) is not supported in uClibc or musl,
which breaks the build.
This commit adds a patch to PHP which makes the use of AI_IDN
conditional, in a way that is identical to what is already done for
AI_ALL. The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/ef040cc45bb2789ead82a8c445db3376e36b5ac7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use "$@" instead of $* to preserve arguments containing spaces.
The shell expands "$@" as "$1" "$2" "$3"... while it expands $@ as $1 $2
$3. With the second form, we loses spaces in positional parameters.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This non ascii character trigger an issue with MakeHeader.py.
./scripts/MakeHeader.py MetersPanel.c
Traceback (most recent call last):
File "./scripts/MakeHeader.py", line 32, in <module>
for line in file.readlines():
File "[...]/output/host/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 956: ordinal not in range(128)
Fixes:
http://autobuild.buildroot.net/results/8ed/8edb78b054a265447fd0e83f67cba5f978be4ed6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 93f080ba0a.
This patch was intended for the next branch, it shouldn't have been
applied to the master branch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This non ascii character trigger an issue with MakeHeader.py.
./scripts/MakeHeader.py MetersPanel.c
Traceback (most recent call last):
File "./scripts/MakeHeader.py", line 32, in <module>
for line in file.readlines():
File "[...]/output/host/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 956: ordinal not in range(128)
Fixes:
http://autobuild.buildroot.net/results/8ed/8edb78b054a265447fd0e83f67cba5f978be4ed6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The script check-bin-arch fails as follows on a config for PowerPC e6500
(64-bit CPU) with BR2_ARCH="powerpc" (32-bit userland desired):
ERROR: architecture for "/lib/modules/..../lib/libcrc32c.ko"
is "PowerPC64", should be "PowerPC"
This situation is perfectly acceptable: the kernel is 64-bit and so are its
modules, even though userland is 32-bit.
To keep check-bin-arch and its caller simple, just skip /lib/modules/
entirely, like is done for /lib/firmware and some others.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
After commit b8c3e94173 ("package/dtc: qemu system build need libfdt")
changed the dtc install target from 'install-bin' to 'install', uboot
compilation failures occurred because libfdt related headers were now
suddenly taken from output/host/include rather than from the uboot sources
itself.
Commit 3a6573ccee ("uboot: use local libfdt.h") solved this by patching
one specific uboot source file, tools/fdtgrep.c, to replace '<...>'-style
includes by '"..."'-style includes.
However, depending on the uboot version, this may not be enough: there may
be other references to fdt header files. In particular taking into account
that it is not uncommon to have vendor-provided uboot trees which have
custom changes.
The root of the problem is that the uboot.mk file passes the host compiler
as follows:
UBOOT_MAKE_OPTS += \
...
HOSTCC="$(HOSTCC) $(HOST_CFLAGS)" \
...
where HOST_CFLAGS contains the string '-I$(HOST_DIR)/include'
The uboot makefiles then use constructs of the form:
$(CC) $(CPPFLAGS) $(CFLAGS) .....
where CPPFLAGS may contain -I references pointing to local directories.
On the expanded compiler command-line, Buildroot's '-I$(HOST_DIR)/include'
is thus present _before_ any -I to local directories, and thus takes
precedence. And that becomes a problem for header files present both
locally as in the Buildroot host directory, which is the case for libfdt.
To fix this problem without having to patch u-boot sources, use '-idirafter'
rather than '-I' to pass the Buildroot host include directory. '-idirafter'
is basically the same thing, but adds the specified directory at the end
of the include precedence chain, rather than at the beginning.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libglib2 recently changed to use the result of the autoconf macro to
decide how to use strerror_r() in g_strerror() instead of embedding the
same preprocessor condition as in glibc's strings.h (upstream commit
c8e268bb was first included in release 2.53.4).
Following this change, if ac_cv_func_strerror_r_char_p is incorrectly
set to "no", the error string is an uninitialized buffer which cannot be
encoded as UTF-8. The final result of this is that GLib functions that
are expected to fill in an error pointer on failure in fact leave this
pointing to NULL which is likely to cause a segfault in client
applications.
In fact the autoconf check compiles a test file but does not need to run
it, so the test is safe when cross-compiling and returns the correct
answer. So remove this cached value and let the configure script figure
it out for itself, fixing g_strerror() on glibc systems.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The script was changed via modernize utility. The only manual
made part was the handling of StringIO.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
AST-2018-002: Crash when given an invalid SDP media format description
By crafting an SDP message with an invalid media format description Asterisk
crashes when using the pjsip channel driver because pjproject's sdp parsing
algorithm fails to catch the invalid media format description.
AST-2018-003: Crash with an invalid SDP fmtp attribute
By crafting an SDP message body with an invalid fmtp attribute Asterisk
crashes when using the pjsip channel driver because pjproject's fmtp
retrieval function fails to check if fmtp value is empty (set empty if
previously parsed as invalid).
AST-2018-004: Crash when receiving SUBSCRIBE request
When processing a SUBSCRIBE request the res_pjsip_pubsub module stores the
accepted formats present in the Accept headers of the request. This code
did not limit the number of headers it processed despite having a fixed
limit of 32. If more than 32 Accept headers were present the code would
write outside of its memory and cause a crash.
AST-2018-005: Crash when large numbers of TCP connections are closed suddenly
A crash occurs when a number of authenticated INVITE messages are sent over
TCP or TLS and then the connection is suddenly closed. This issue leads to
a segmentation fault.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The shell expands "$@" as "$1" "$2" "$3"... while it expands $@ as $1 $2
$3. With the second form, we loses spaces in positional parameters.
As example, the following call
pkg-config --cflags "one two" three
is wrapped as
pkgconf --cflags one two three
while we are expecting
pkgconf --cflags "one two" three
"$@" is really useful when writing wrappers. It passes the positional
arguments *as* they are given.
Double quote $@ to prevent from splitting elements.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We have quite a bit more than "hundreds of packages" nowadays:
find package -name \*.mk | wc -l
2285
So adjust the text to say 'several thousand' instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For some boards, for example the Raspberry Pi, it's necessary to build
in-tree dts files as well as custom/out of tree dts-files (dt-blob.bin).
The existing logic made these two options exclusive, this commit changes
that to allow both in-tree as well as custom sources for dts files.
Signed-off-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
[Arnout: re-wrap help, add extra empty line, change = into +=]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also removed a patch fixing the build with musl as it made its way into
the 1.6.2 version.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-10713: Out-of-bounds access within pch_write_line() in
pch.c can possibly lead to DoS via a crafted input file.
Add upstream patch fixing CVE-2018-6951: There is a segmentation fault,
associated with a NULL pointer dereference, leading to a denial of
service in the intuit_diff_type function in pch.c, aka a "mangled
rename" issue.
This bump does NOT fix CVE-2018-6952. See upstream bug #53133
(https://savannah.gnu.org/bugs/index.php?53133).
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-0487: Remote attackers can execute arbitrary code or cause a
denial of service (buffer overflow) via a crafted certificate chain that
is mishandled during RSASSA-PSS signature verification within a TLS or
DTLS session.
CVE-2018-0488: When the truncated HMAC extension and CBC are used,
allows remote attackers to execute arbitrary code or cause a denial of
service (heap corruption) via a crafted application packet within a TLS
or DTLS session.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sunxi-mali-mainline-driver builds using parallel compilation by default,
using -j $(nproc), but this could be not wanted.
Pass -j $(PARALLEL_JOBS) to build using jobs configured in buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2018-6789: Meh Chang discovered a buffer overflow flaw in a utility
function used in the SMTP listener of Exim, a mail transport agent. A
remote attacker can take advantage of this flaw to cause a denial of
service, or potentially the execution of arbitrary code via a specially
crafted message.
Dropped ChangeLog hunk and adjusted file path of upstream commit so it
applies to tarball.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-5378
It was discovered that the Quagga BGP daemon, bgpd, does not
properly bounds check data sent with a NOTIFY to a peer, if an
attribute length is invalid. A configured BGP peer can take
advantage of this bug to read memory from the bgpd process or cause
a denial of service (daemon crash).
https://www.quagga.net/security/Quagga-2018-0543.txt
CVE-2018-5379
It was discovered that the Quagga BGP daemon, bgpd, can double-free
memory when processing certain forms of UPDATE message, containing
cluster-list and/or unknown attributes, resulting in a denial of
service (bgpd daemon crash).
https://www.quagga.net/security/Quagga-2018-1114.txt
CVE-2018-5380
It was discovered that the Quagga BGP daemon, bgpd, does not
properly handle internal BGP code-to-string conversion tables.
https://www.quagga.net/security/Quagga-2018-1550.txt
CVE-2018-5381
It was discovered that the Quagga BGP daemon, bgpd, can enter an
infinite loop if sent an invalid OPEN message by a configured peer.
A configured peer can take advantage of this flaw to cause a denial
of service (bgpd daemon not responding to any other events; BGP
sessions will drop and not be reestablished; unresponsive CLI
interface).
https://www.quagga.net/security/Quagga-2018-1975.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt WebEngine auto-guesses if it compiles support for alsa. When the
alsa-lib config is enabled but the features mixer, rawmidi, hwdep and
seq are not also enabled, it leads to a build failure.
Lets the developer decide whether or not support for alsa in Qt
WebEngine by adding the new config BR2_PACKAGE_QT5WEBENGINE_ALSA that
selects the features it needs when it is set.
Fixes [1].
[1]: http://autobuild.buildroot.net/results/d81537a8f67bb0a3625057560b2f16daf4828f98/build-end.log
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the Go programming language to the 1.10 release.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0001-libext2fs-fix-build-failure-in-swapfs.c-on-big-endia.patch as it
is now upstream.
Only contains minor bugfixes since 1.43.8 and no new features.
>From the release notes:
Remove the huge file flag from libe2p (and hence from chattr/lsattr),
since it was never made visible by the kernel. Remove the description
of some compression related flags, and add a description of the
encrypted file flag, and the project hierarchy flag.
Remove a misplaced "MNP is unsupported" message from debugfs.
Fix a build failure in lib/ext2fs/swapfs.c on big-endian systems.
(Addresses Debian Bug #886119)
Fix various Debian packaging issues. (Addresses Debian Bug #269569).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes: https://mariadb.com/kb/en/mariadb-10131-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10131-changelog/
Fixes the following security vulnerabilities:
CVE-2018-2562 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server : Partition). Supported versions that are affected are
5.5.58 and prior, 5.6.38 and prior and 5.7.19 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via multiple
protocols to compromise MySQL Server. Successful attacks of this vulnerability
can result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server as well as unauthorized update, insert or
delete access to some of MySQL Server accessible data.
CVE-2018-2622 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are 5.5.58
and prior, 5.6.38 and prior and 5.7.20 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via multiple
protocols to compromise MySQL Server. Successful attacks of this vulnerability
can result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.
CVE-2018-2640 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.58 and prior, 5.6.38 and prior and 5.7.20 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via multiple
protocols to compromise MySQL Server. Successful attacks of this vulnerability
can result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.
CVE-2018-2665 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.58 and prior, 5.6.38 and prior and 5.7.20 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via multiple
protocols to compromise MySQL Server. Successful attacks of this vulnerability
can result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.
CVE-2018-2668 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.58 and prior, 5.6.38 and prior and 5.7.20 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via multiple
protocols to compromise MySQL Server. Successful attacks of this vulnerability
can result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.
CVE-2018-2612 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.38 and
prior and 5.7.20 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized creation, deletion or modification access to critical data or all
MySQL Server accessible data and unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling host-jq with gcc 6+, running it gives an immediate segfault.
Reported upstream: https://github.com/stedolan/jq/issues/1598
The issue can be solved by compiling with _GNU_SOURCE as extra preprocessor
define. Once the issue is solved upstream, this change can be reverted.
As the issue will normally be the same for target, apply the same fix there.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-14632: Libvorbis 1.3.5 allows Remote Code Execution upon freeing
uninitialized memory in the function vorbis_analysis_headerout() in info.c
when vi->channels<=0, a similar issue to Mozilla bug 550184.
CVE-2017-14633: In libvorbis 1.3.5, an out-of-bounds array read
vulnerability exists in the function mapping0_forward() in mapping0.c, which
may lead to DoS when operating on a crafted audio file with
vorbis_analysis().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues according to NEWS:
CVE-2018-6485: An integer overflow in the implementation of the
posix_memalign in memalign functions in the GNU C Library (aka
CVE-2018-6551: The malloc implementation in the GNU C Library (aka glibc or
libc6), from version 2.24 to 2.26 on powerpc, and only in version 2.26 on
i386, did not properly handle malloc calls with arguments close to SIZE_MAX
and could return a pointer to a heap region that is smaller than requested,
eventually leading to heap corruption.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d2f0a9bba4 (libcpprestsdk: fix building as a static library)
changed libcpprestsdk to use pkg-config to find the linker flags for
openssl, so ensure it is available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For 4.15 support and various fixes. This version now uses quilt to apply
patches, which is not a required dependency of Buildroot - So add a
POST_PATCH hook to change it to use apply-patches.sh instead.
git shortlog --invert-grep --grep travis --no-merges 42c7c139c14103a83bb2ad7e7a1f0ed491f96500..
Giulio Benetti (7):
Fix bulding driver twice.
Fix 0014-mali-Make-devfreq-optional.patch
Add unapply_patches function in build.sh
Fix 0013-mali-support-building-against-4.15.patch
Add clean option to build.sh
Add parallel building by default and -j option to override jobs number.
Add 0015 parallel build patch to quilt series
Jonathan Liu (2):
Add note about FRONTBUFFER_LOCKING environment variable
Fix Qt capitalization and add link to website
Maxime Ripard (12):
mali: Fix build in 4.15
mali: Make reserved memory optional as it should be
mali: sunxi: Set platform bus type right after device allocation
mali: Make devfreq optional
mali: Actually fix the build
build: Treat patch and make failures as errors
build: Make patch return immediately on error
build: Make sure that we're building a supported release
README: fix the casing of sunXi
README: Talk about triple buffering
build: Switch to quilt
patches: Move version-specific patches to their directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Allwinner Mali openGL userspace driver r6p2.
Used combined with kernelspace Mali driver,
it gives possibility to use 3D openGL SoC acceleration.
It provides fbdev libraries and headers.
It is compatible with Linux >= 4.4 as sunxi-mali-driver-mainline.
[Peter: Move version logic to Config.in, ensure directories exists]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add DTS patch enabling AP6212 WiFi/BT combo support
-- this patch is on its way to mainline Linux v4.16
- enable WiFi support in kernel config
- enable Broadcom brcmfmac kernel driver in kernel config
- add Broadcom wireless firmware package to image
- add basic wireless tools to image
- add mdev to image to enable module autoloading
- add rootfs overlay with proper NVRAM file for on-board AP6212 chip
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump versions:
- use U-Boot 2008.01
- use Linux kernel v4.15.2
Drop patch with dts sdcard fix since it has been
merged to Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Keep the musl workaround patch for now, even though libc-compat.h has
been updated from kernel v4.15. To take advantage of the new
libc-compat.h we need a newer or patched version of musl. The workaround
patch will be removed once musl is updated, and external autobuilders
toolchains are rebuilt.
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The musl/kernel headers workaround was added in commit 196932cd91
(toolchain: workaround musl/kernel headers conflict) to fix definition
collisions in networking related headers between musl headers and kernel
headers. Kernel headers from version 4.15 and newer do not need this
workaround anymore since kernel commit c0bace798436bc (uapi libc compat:
add fallback for unsupported libcs). The C library does not have to
define the __GLIBC__ macro to make the __UAPI_DEF_* macros effective.
Updated the comment to accordingly.
Tested with the xl2tp package. This package fails to build with older
kernel headers without the workaround (struct in_pktinfo redefinition,
among others). With 4.15 headers, xl2tp builds fine with this patch
applied. That is, no workaround needed.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel version 4.15 (not 4.16 as the musl commit log claims) allows
disabling of more parts of the kernel headers definitions. Add upstream
musl patch that defines the relevant macros. This solves issues of
networking related symbols redefinition in kernel headers that cause
headers conflicts. With that in place a subsequent commit will limit the
musl/kernel headers conflict avoidance workaround in Buildroot to kernel
headers older than 4.15. This workaround has been introduced in commit
196932cd91 (toolchain: workaround musl/kernel headers conflict).
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to disable any systemd parts using either IDN, NSS or gshadow.
IDN is only disabled in C library function call to getnameinfo(),
it does not effect libidn/libidn2 usage in systemd.
Tested with qemu-system-arm.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Free Electrons has been renamed to Bootlin, so update the
Documentation section of our website describing the Buildroot training
course to use the new company name and domain name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Free Electrons is being renamed to Bootlin. While the
@free-electrons.com e-mail addresses still work, it is not guaranteed
to be the case in the future. Hence, this patch updates the DEVELOPERS
file to use the @bootlin.com addresses for all Bootlin engineers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Romain Perier is no longer at Free Electrons, and his e-mail address
@free-electrons.com no longer exists, especially with the rename to
Bootlin. Romain is no longer maintaining the amd-catalyst package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit fixes the warnings reported by check-package on the help
text of package Config.in file, related to the formatting of the help
text: should start with a tab, then 2 spaces, then at most 62
characters.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit fixes the warnings reported by check-package on the help
text of package Config.in file, related to the formatting of the help
text: should start with a tab, then 2 spaces, then at most 62
characters.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit fixes the warnings reported by check-package on the help
text of all package Config.in.host files, related to the formatting of
the help text: should start with a tab, then 2 spaces, then at most 62
characters.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For this platform, u-boot uses dtoc during the build, which needs Python
libfdt. Set the corresponding option TARGET_UBOOT_NEEDS_PYLIBFDT in the
defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
utils/check-package complains as follows:
package/rustc/Config.in.host:6: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
package/rustc/Config.in.host:79: empty line at end of file
This patch fixes these warnings.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
utils/check-package complains as follows:
package/rustc/rustc.mk:10: possible typo: RUST_TARGET_NAME -> *RUSTC*
package/rustc/rustc.mk:18: possible typo: RUST_HOST_NAME -> *RUSTC*
As RUST_{HOST,TARGET}_NAME are related to the Rust compiler, it
sounds sensible to rename them to RUSTC_{HOST,TARGET}_NAME.
So update all rust related packages to use the new variables.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While the conversion to meson, this seems to be missed.
Found while trying to build systemd with uClibc toolchain.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-1000041: information disclosure via a crafted SVG file.
Bump to the latest (maybe last) release in the 2.40.x series. Newer
versions require a Rust compiler.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While a hash check is being done, it's still better to use a download
URL with HTTPS.
Signed-off-by: Danilo Bargen <mail@dbrgn.ch>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2017-15873: Integer overflow in decompress_bunzip2.c leads to a read
access violation
CVE-2017-15874: Integer overflow in decompress_unlzma.c leads to a read
access violation
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Flask-SQLAlchemy is a Flask microframework extension which adds support for
the SQLAlchemy SQL toolkit/ORM.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that
gives application developers the full power and flexibility of SQL.
It provides a full suite of well known enterprise-level persistence
patterns, designed for efficient and high-performing database access,
adapted into a simple and Pythonic domain language.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The QT5TOOLS_SOURCE variable uses mismatch QT5BASE_VERSION variable.
This commit fixes the typo by using the appropriate QT5TOOLS_VERSION
variable.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The QT53D_SOURCE variable uses mismatch QT5SVG_VERSION variable.
This commit fixes the typo by using the appropriate QT53D_VERSION
variable.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2017-8872: An attackers can cause a denial of service (buffer
over-read) or information disclosure.
Patch from the upstream bug tracker.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the following check-package warning:
./package/rust-bin/rust-bin.mk:27: expected indent with tabs
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues according to NEWS:
CVE-2017-1000408: Incorrect array size computation in _dl_init_paths leads
to the allocation of too much memory. (This is not a security bug per se,
it is mentioned here only because of the CVE assignment.) Reported by
Qualys.
CVE-2017-1000409: Buffer overflow in _dl_init_paths due to miscomputation of
the number of search path components. (This is not a security vulnerability
per se because no trust boundary is crossed if the fix for CVE-2017-1000366
has been applied, but it is mentioned here only because of the CVE
assignment.) Reported by Qualys.
CVE-2017-16997: Incorrect handling of RPATH or RUNPATH containing $ORIGIN
for AT_SECURE or SUID binaries could be used to load libraries from the
current directory.
CVE-2018-1000001: Buffer underflow in realpath function when getcwd function
succeeds without returning an absolute path due to unexpected behaviour of
the Linux kernel getcwd syscall. Reported by halfdog.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update 0002-Makefile.flags-strip-non-l-arguments-returned-by-pkg.patch
for 1.28.0
- Remove upstream patches 3, 4, and 5.
- Update buxybox.config and busybox-minimal.config
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Make the detection of libnuma in the configure script consistent when
the numactl package is enabled.
ltp-testsuite does not currently take explicit enable/disable for
libnuma, so none are used. The next ltp-testsuite version will add these
options.
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a major update for libgpiod. The API is not compatible with the
v0.x.y series but since nothing in current buildroot git depends on
this project, I believe we can simply bump the version.
The included tools are compatible with their 0.x.y counterparts.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 0.28, C++ wrappers are provided as well. The
configure script appropriately detects the availability of a C++
compiler so no Buildroot changes are needed for this.
Building fails with --enable-ipv6 so --disable-ipv6 is needed in
CONF_OPTS. This is known by liblo developers and building without
ipv6 support is recomennded.
Included hash for license files.
Signed-off-by: Alex Baldwin <alexbaldwinmusic@gmail.com>
[Thomas: use single sha256 hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version added support for shared or static library building
through BUILD_STATIC and BUILD_SHARED variables so set them depending
on BR2_xxx_LIBS variables
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also add 0001-Fix-building-against-LibreSSL.patch to fix compiling against
LibreSSL.
This patch has been submitted and accepted upstream.
0ee014d497
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since kernel 4.15 the wandboard rev D1 variants are supported.
Add support for them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CVE-2017-10790: NULL pointer dereference and crash when reading crafted
input
CVE-2018-6003: Stack exhaustion due to indefinite recursion during BER
decoding
Add license files hashes.
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages build C++ 32bits host-tools and need the g++-multilib to
be installed on the build machine. As example, qt5webengine builds a C++
host-tool when target is 32bits.
Add the check for g++-multilib to the dependencies script; and update
the Dockerfile to install g++-multilib package.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to ncurses to install extra user-configured terminfo
files. By default, only a small number of vital terminfo files are
installed on the target. This allows a build to specify the terminfo
files it needs.
Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: qstrip the variable before using it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uClibc-ng removed internal RPC implementation as it
is ipv4 only and can not be used for most important RPC software
rpcbind and nfs-utils.
musl does not implement RPC and GNU C library deprecated the
internal implementation a while ago.
It is still possible to use the C library implementation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: change to use libtirpc when available, not just when the
toolchain does not have RPC support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GLIBC_SRC_SUBDIR was needed when Buildroot supported
eglibc which stored all sources in a sub-directory.
It was not removed by the commit removing eglibc support [1].
[1] 500de2598a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with Glibc 2.27, powf64() is provided by the C library
and colide with the one defined dy libraw.
Rename internal powf64 to libraw_powf64.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With glibc 2.27 memfd_create() is inside a _GNU_SOURCE guard, so call
AC_USE_SYSTEM_EXTENSIONS to get this defined.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add reference to upstream commit, as suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While we have several defconfigs building internal toolchains with
uClibc, we don't have any building internal toolchain with glibc and
musl. However, having such defconfigs is nice when we bump the C
library version, in order to immediately get feedback on build
failures.
Note that while the ARC internal defconfig uses glibc, it uses the
special ARC glibc version, so it doesn't test version bumps of the
upstream glibc C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This updates x11vnc from 0.9.14 to 0.9.15. The cherry-picked patch is now
part of the release.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To test the support for the Rust language, the following tests are added:
- building Rust compiler and Cargo from source.
- installing a pre-built Rust compiler and building Cargo from source.
For each test, a Rust test program is built and installed in the root file
system of a ARM vexpress QEMU system. The test is declared OK if the program can
be run properly from the test system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add instructions for adding a package which uses Cargo as build system.
[Peter: fix indentation]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides Cargo, the Rust official package manager.
Cargo is written in Rust and uses Cargo as its build system. It also
depends on other Rust packages.
Normally, a previously installed version of Cargo would be used to:
1. Fetch the dependencies.
2. Build the new version of Cargo, using the available Rust compiler.
But the fetching step prevents offline builds. So instead two features
of Cargo are leveraged: vendoring [1] and local registry.
First, a tarball of the build dependencies generated using `cargo
vendor` is fetched along with Cargo source code.
Then, the build process is as follows:
1. The tarball of the build dependencies is uncompressed in a local
registry.
2. A snapshot of Cargo, provided by cargo-bin, builds the final
version of Cargo.
3. A configuration file telling Cargo how to cross-compile programs for
the target is generated and installed.
Currently, only the host variant is provided.
[1] https://github.com/alexcrichton/cargo-vendor
[Peter: use src.fedoraproject.org, fix comment]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow build of host variant of libssh2, which depends on host-openssl.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides rustc, the compiler for the Rust programming
language, built from source.
Currently, only the host variant is built.
The Rust compiler uses LLVM as its backend: a copy of LLVM source code
is provided and CMake is used to build it. It is possible to use a
pre-built external copy. When LLVM/clang will be available in Buildroot,
it would be possible to benefit from this feature and thus decrease
build time.
LLVM is configured to generate code for x86, ARM, PowerPC and MIPS
architectures.
The Rust compiler uses Cargo as its build system and is written in Rust.
Therefore this package depends on cargo-bin and rust-bin.
The internal build process is as follows:
1. stage0 compiler, provided by rust-bin, is used to build stage1
compiler.
2. stage1 compiler builds the final Rust compiler (stage2 compiler)
and the standard library for the host architecture.
3. the standard library for the target architecture is built.
The target architecture to support is given by the GNU/LLVM target
triple. Rust supports some predefined targets [1]. As the build system
expects the triple to be in the form of <arch>-unknown-<system> and
Buildroot toolchain wrapper uses <arch>-buildroot-<system>, the package
Makefile uses $(RUST_TARGET_NAME) defined in the rustc package and uses
it instead of $(GNU_TARGET_NAME).
When compiling Rust code with this compiler, the generated program only
depends on the target C library, as it is statically linked to the Rust
standard library and any other code from Rust packages (a.k.a.
"crates").
If the jemalloc package is selected, support for this memory allocator
will be enabled in the target standard library.
The menuconfig entry for rustc is also updated to expose this provider.
[1] https://forge.rust-lang.org/platform-support.html
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package fetches a binary version of Cargo, suitable to
bootstrap the host variants of the Rust compiler and Cargo, the package
manager.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides a pre-built version of rustc, the compiler for the
Rust programming language, fetched from the upstream project.
A pre-built version of the standard library for the host as well as one
for the chosen target are also fetched and installed.
Only the host variant is provided to allow the user to cross-compile
Rust programs and run them on the target.
This package could also be used to provide a bootstrap compiler when building
Rust from source. So, in order to add it as a build dependency, the compiler and
standard libraries are only installed in $(HOST_DIR) if the package is
explicitly selected.
The menuconfig entry for rustc is also updated to expose this provider.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The compiler for the Rust programming language is called rustc.
There is only one reference implementation for it, based on LLVM, from
the Rust project [1]. It can generate code for various architectures so
it can be labeled as a cross-compiler. But, as for GCC, building it
from source takes time.
So it would be sensible to have at least one package which provides it
as a pre-built version, fetched from the upstream project. Later another
package can be added, to build it from source code.
In addition to the compiler, the standard library for the host and/or
the target should also be fetched/built.
So, add a virtual package named rustc to enable support for multiple
providers.
Currently, only the host variant will be available to allow the user to
cross-compile Rust programs for the target.
[1] http://rust-lang.org
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Configure summary without this patch and without alsa-lib built before:
Extra tools required for testing and examples :
[...]
Have ALSA : ................... no
and with this patch
Extra tools required for testing and examples :
[...]
Have ALSA : ................... yes
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2018.01 version and kernel to 4.15.1.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed out by Joel Stanley:
https://patchwork.ozlabs.org/patch/863011/
Github now longer provides the exact same tarball for the or1k musl-5.4.0
tarball, breaking the build. Even more, musl-5.4.0 is the name of a git
branch, not a tag.
Fix both problems by changing to the or1k-musl-5.4.0-20170218 tag, which
points to the exact same git commit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we refer to the latest version of the image, which means we
can't guarantee any reproducibility. Also, it measn we can't have a
separate images for the maintenance branches (especially the LTS) and
master.
Update the comment in the Dockerfile to create and push tagged images.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we're now using a specific base image tag, we need to also use a
specific, stable repository to get additional packages from for this
image.
As such, use the Debian snapshot that matches the base image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we are using debian:stable, which is subject to change with
time, as new stable versions of Debian are released/updated.
Use the latest tagged stable release, stretch-20171210 as of today, as
the base distribution to use.
This will ease reproducible builds in the future.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This image is not built very often, and when it is, it is important to
see what's going on, so don't be silent when installing packages from
the distro, and since that can take a bit of time it thus serves as
progress report...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If OpenSSL is selected, --enable-openssl-random should be explicitly
enabled for consistency with the disable case.
[Peter: tweak commit text]
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise, explicitly disable it, so that the configure script does not
misdetect a system-installed libedit for example.
Also, add a profile snippet enabling line editing, Emacs style.
[Peter: move DASH_INSTALL_PROFILE inside conditional,
ensure /etc/profile.d exists]
Change-Id: I68c6dbbafa95e266860329cb9c7ff5519fda5bf8
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix gdk-pixbuf broken by host package moved to /lib instead of /usr/lib
Regression occured following commit 19ba17ee3b (Globally replace
$(HOST_DIR)/usr/lib with $(HOST_DIR)/lib).
The host package loader.cache now refer to $(HOST_DIR)/lib, and the target
one should refer to /usr/lib.
Fix it by adjusting the sed invocation.
[Peter: extend commit message]
Signed-off-by: Pierre CROKAERT <pct@crookies.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
handle new dependency to Jansson (since 1.10.0).
[Peter: unconditionally disable ovs support as suggested by Thomas]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The isc assertions from the bundled bind dns library are
using the __FILE__ macro for debug messages (see
dhcp-4.3.5/bind/bind-9.9.9-P3/lib/isc/include/isc/assertions.h).
Disabling the assertions gains:
- reproducible builds (no build time paths in the executable)
- space saving on the target:
dhcpd: 1.9M -> 1.6M
dhcrelay: 1.6M -> 1.3M
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 1.0.4-5 is no longer available, replace with 1.0.4-6 so ustr can
continue to be built.
[Peter: use snapshot.debian.org as suggested by Baruch]
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This updated version fixes memory violations, memory leaks, compiler
warnings and includes updated documentation on usage.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 02e5cef1 (system: add option to choose what /bin/sh points to)
removed the symlink creation, but forgot to remove the corresponding
comment, which is now more puzzling than amusing...
Remove the comment.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also refresh patches and remove 0004-add-false-option-for-tests.patch as it has
been added upstream.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
other changes:
- Add a license file to bootstrap.mk
- Add a hash for the license file to bootstrap.hash
- Remove copying bootstrap-theme.min.css as it's no longer included.
- Remove copying fonts folder as it's no longer included.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will make the script more portable, making it possible to run on
systems that do not have bash.
The script was tested with ash from BusyBox and checked for portability
issues and bashisms with shellcheck and checkbashisms tools.
The patch was already applied upstream [1] and should be removed in the
next version bump.
[1] 4ef4274053
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using a variable in a printf format string may lead to undesirable
results if the variable contains format controls, so replace
printf "foo $var bar"
by
printf "foo %s bar" "$var"
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace (echo "msg" && exit 1) by { echo "msg"; exit 1; }.
The (list) compound command runs in a subshell, so the "exit" interrupts
the subshell, not the main script. Examples:
$ sh -c "echo 1; (exit 1); echo 2"
1
2
$ sh -c "echo 1; { exit 1; }; echo 2"
1
$
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also update 0003-configure-disable-the-phar-tool.patch as configure.in is no
longer provided in the tarballs. Instead, configure.ac is patched.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux to 4.15 and U-Boot to 2018.01. Remove networking dts patches
since they has landed in Linux 4.15. Update readme.txt: fix mainline BSP
versions and update boot selection for board rev 1.3.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that binutils 2.30 has been introduced, and we have moved to
2.29.1 as the default version, it is time to drop support for binutils
2.27.
Also use xz-compressed tarball for all official supported version.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that binutils 2.30 has been released, it is time to move to
binutils 2.29.x as the default binutils version, instead of 2.28.1.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All patches from binutils 2.29 are kept and slightly adapted to
differences that appeared in binutils 2.30.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E101 indentation contains mixed spaces and tabs
E128 continuation line under-indented for visual indent
E231 missing whitespace after ','
E261 at least two spaces before inline comment
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
W191 indentation contains tabs
Ignore these warnings:
E402 module level import not at top of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E202 whitespace before ']'
E203 whitespace before ':'
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E711 comparison to None should be 'if cond is None:'
E741 ambiguous variable name 'l'
F401 'sys' imported but unused
W391 blank line at end of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ignore these warnings:
F401 'lib.ConsecutiveEmptyLines' imported but unused
And remove comments that are not needed anymore.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
Ignore these warnings:
E402 module level import not at top of file
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E128 continuation line under-indented for visual indent
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix these warnings:
E122 continuation line missing indentation or outdented
E127 continuation line over-indented for visual indent
E128 continuation line under-indented for visual indent
E202 whitespace before ']'
E221 multiple spaces before operator
E225 missing whitespace around operator
E231 missing whitespace after ','
E302 expected 2 blank lines, found 1
E305 expected 2 blank lines after class or function definition, found 1
E502 the backslash is redundant between brackets
E713 test for membership should be 'not in'
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When host-kodi-texturepacker is built on a machine using gcc 7.x, it
fails to build with:
/usr/include/stdlib.h:443:14: error: declaration of ‘void* reallocarray(void*, size_t, size_t) throw ()’ has a different exception specifier
extern void *reallocarray (void *__ptr, size_t __nmemb, size_t __size)
This commit backports the upstream fix for this problem.
The issue could be reproduced with the following defconfig (and a gcc
7.x host compiler):
BR2_x86_64=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_PY_PYC=y
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux to 4.15 and U-Boot to 2018.01. Enable dhcp for eth0 since
Ethernet support for Allwinner H2/H3 SoCs has landed in Linux 4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux to 4.15 and U-Boot to 2018.01. Enable dhcp for eth0 since
Ethernet support for Allwinner H2/H3 SoCs has landed in Linux 4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Adapt all patches.
* Use the new configure option enable-system-deps even though there is
still a patch needed to correct includes.
* Disable graphics to not depends on X libraries. Disable also
mod_avatar from the default loaded modules, since this module
requires graphics enabled.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package uses autoconf (AX_CXX_COMPILE_STDCXX_11) to validate C++11
support. The test code uses an auto static data member for validation;
however, support for this only exists in GCC 4.8+ [1]. This causes the
configuration script to generated the following errors:
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ accepts -g... yes
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features by default... no
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -std=c++11... no
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with +std=c++11... no
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -h std=c++11... no
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -std=c++0x... no
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with +std=c++0x... no
checking whether .../host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -h std=c++0x... no
Bumping the required GCC version of this package to at least v4.8.
Fixes:
http://autobuild.buildroot.net/results/fae9ccc37c31c6d1852d0dc11d43f9c6ecbf1fe4/
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=55003
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass BR2_EXTERNAL value via -e option.
This will prevent merge_config.sh from silently eating any symbols defined in
external trees on a clean buildroot tree invocation.
Signed-off-by: Ilya Kuzmich <ilya.kuzmich@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The upstream patch which disables the build-time systemctl call made it into
this release so removing it here. Also adding hash for the COPYING file.
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A flaw was found in dovecot 2.0 up to 2.2.33 and 2.3.0. An abort of SASL
authentication results in a memory leak in dovecot's auth client used by
login processes. The leak has impact in high performance configuration
where same login processes are reused and can cause the process to crash due
to memory exhaustion.
For more details, see:
http://www.openwall.com/lists/oss-security/2018/01/25/4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Open On-Chip Debugger (OpenOCD) 0.10.0 does not block attempts to use HTTP
POST for sending data to 127.0.0.1 port 4444, which allows remote attackers
to conduct cross-protocol scripting attacks, and consequently execute
arbitrary commands, via a crafted web site.
For more details, see:
https://sourceforge.net/p/openocd/mailman/message/36188041/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add SHA256 hash, and a license hash.
Drop mxml dependency since XML support has been removed upstream.
Refresh the patch.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_TARGET_GENERIC_HOSTNAME is set, use the config option
--with-fallback-hostname to specify the fallback hostname to use
if none is configured in /etc/hostname. This is useful in a
pristine installation with an empty /etc.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is recommended that vendor trees store OS release information
in /usr/lib/os-release and that /etc/os-release should be a relative
symlink to /usr/lib/os-release.
For more details, see:
http://0pointer.de/public/systemd-man/os-release.html
[Peter: don't hide command, simplify ln invocation]
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides a tool to load a firmware to the Cortex-M4 core
available in some i.MX processors such as i.MX6SX or i.MX7.
This package was tested on a i.MX7D Nitrogen7 platform:
# imx-m4fwloader hello_world.bin 0x007F8000
Upstream repository:
https://github.com/codeauroraforum/imx-m4fwloader
[Peter: add license hash, install in /usr/sbin, tweak help text]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When physfs is built for a Linux system the PHYSFS_PLATFORM_POSIX (which
enable code that use pthread_*()) symbol must be defined, so threads support
is required. The physfs build system used by the previous version didn't
correctly set PHYSFS_PLATFORM_POSIX for system without pthread support.
Add pthread dependency.
Fixes:
http://autobuild.buildroot.org/results/75d/75d68ff9da42d61f47d80b463445c12bc51ed1a4
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The hwdata collection is hosted at GitHub now and provides additional
databases, besides pci.ids and usb.ids:
- Individual Address Block (IAB) and Organizationally Unique Identifier
(OUI) databases, from IEEE Registration Authority
- PNP ID database (from Microsoft)
Install only pci.ids and usb.ids by default, to keep compatibility with
previous versions.
In the future we can make other packages (pciutils, lshw) use the common
files instead of installing their own copies, thus saving some storage
space.
[Peter: drop BR2_PACKAGE_HWDATA_ANY and build time error, rework install step]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building SWUpdate with the following defconfig:
```
CONFIG_DOWNLOAD=y
```
.. the build process breaks with:
```
corelib/channel_curl.c:27:10: fatal error: json-c/json.h: No such file or directory
#include <json-c/json.h>
```
Looking at the SWUpdate Kconfig based build system shows that `CONFIG_DOWNLOAD`
depends on `HAVE_LIBCURL`, which selects CURL, which eventually enables the
(unnecessary) build of channel_curl.o.
The upstream fixes the condition for building channel_curl.o by adding a new
hidden config option `CHANNEL_CURL`, which is only selected by the
dependent options.
Backported from:
37a6666a53
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Depending on how setup.py reads requirements files empty elements can occur.
This patch takes care, that such elements will be ignored and don't crash
the scanpypi script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches. autoreconf is no longer needed.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable all programs that depend on ncurses, as well as utilities that
are useless on the host: agetty, chfn-chsh, chmem, login, lslogins,
mesg, more, newgrp, nologin, nsenter, pg, rfkill, schedutils, setpriv,
setterm, su, sulogin, tunelp, ul, unshare, uuidd, vipw, wall, wdctl,
write, zramctl.
Also add dependency on host-zlib if host cramfs utils are to be built.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE-2018-4088, CVE-2017-13885,
CVE-2017-7165, CVE-2017-13884, CVE-2017-7160, CVE-2017-7153,
CVE-2017-7153, CVE-2017-7161, and CVE-2018-4096. Additionally, it solves
a GStreamer deadlock when stopping video playback, and contains fixes
and improvements for the WebDriver implementation.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/01/24/webkitgtk2.18.6-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Nowadays libtasn1 is always required and if not present the CMake
configuration step would fail.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Simply a matter of updating the year, since it's again Google and Mind
for the FOSDEM2018 developer meeting.
Also add the 2017 sponsorship to the "Past sponsors" section.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.01 and kernel to 4.14.4 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-fix-regex-escape-sequence-error.patch, as it has been
committed upstream.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fsl-epdc.mk file is no longer shipped with the package.
Add license files hashes.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With 1.0.28 NPTL support for m68k was added.
Microblaze is already supported for a while, enable it now to
benefit from it.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar patch included upstream.
Mostly bugfixes and NPTL support for m68k was added.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python-txtorcon selects python-pyopenssl and python-service-identity, both
(indirectly) needing C++ support, so propagate that dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 954509f added a security fix for CVE-2017-8779, involving
pairing all svc_getargs() calls with svc_freeargs() to avoid a memory
leak. However it also introduced a couple of issues:
- The call to svc_freeargs() from rpcbproc_callit_com() may result in
an attempt to free static memory, resulting in undefined behaviour.
- A typo in the svc_freeargs() call from pmapproc_dump() causes NIS
(aka ypbind) to fail.
Backport upstream fixes for these issues to version 0.2.3.
Signed-off-by: Ed Blake <ed.blake@sondrel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pull a patch from upstream that adds Documentation/licenses/COPYING.ISC
instead of distributing the whole rfkill.c file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc 4.7, it fails to build with:
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features by default... no
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -std=c++11... no
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with +std=c++11... no
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -h std=c++11... no
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -std=c++0x... no
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with +std=c++0x... no
checking whether /home/buildroot/build/instance-0/output/host/bin/powerpc-ctng_e500v2-linux-gnuspe-g++ supports C++11 features with -h std=c++0x... no
configure: error: *** A compiler with support for C++11 language features is required.
Fixes:
http://autobuild.buildroot.net/results/788c1a4bbc8ec90b5cdd94c107c784df21869f6c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update dependencies and add licence checksum.
As BR now has the latest setuptools version, remove now obsolete
comment.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iputils executables are installed without the setuid bit set,
which prevents some programs from working.
This patch adds a permission table to fix the permissions of the ping
and traceroute6 executables.
Signed-off-by: Einar Jon Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libatomic, like libgcc_s, is provided by gcc, so there is no reason to
copy it over only for the glibc and uclibc cases, it should also be
copied for the musl case. Without this, a program linked with
libatomic on a musl system will fail to run due to the missing
library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This packages now depends also on erlang-p1-utils.
Adapt the patch that removes rebar dependencies to version changes.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch the Makefiles to make PREFIX and DESTDIR follow standard
semantics to get rid of DESTDIR during compile time in
selinux-python.mk.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd is no longer an autotools package, as such, it has now been converted
over to meson.
Even though systemd234 has meson support, it is broken with gcc7, as such
the revision bump and conversion to meson must be in a single patch.
Changes include:
- Change systemd from an autotools package to a generic package
- Changing all the options from --enable/disable to -Doption=true/false
- Remove --without-python (no longer an option)
- Remove all of the ac_cv_path_ variables, and move them into CONF_OPTS
with the prefix -Doption-path=/path.
- Add sha256sum's for the license files.
- Remove 0002-build-check-for-ln-relative.patch and add
0002-install-dont-use-ln-relative.patch in its place, the old patch relied on autotools and is no longer relevant.
- Add 0004-add-false-option-for-tests.patch. With the conversion to meson,
systemd no longer has the option to disable unit tests from being built.
This patch re-adds the functionality. This prevents 381 files from being
built, and prevents gcrypt from becoming a dependency.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: gitlab-ci https://gitlab.com/ymorin/buildroot-ci/pipelines/15857672/builds
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The lldpad package comes with utilities to manage an LLDP interface with
support for reading and configuring TLVs. TLVs and interfaces are individual
controlled allowing flexible configuration for TX only, RX only, or TX/RX
modes per TLV.
http://open-lldp.org/
Signed-off-by: Laurent Charpentier <laurent_pubs@yahoo.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch the Makefiles to make PREFIX and DESTDIR follow standard
semantics to get rid of DESTDIR during compile time in
libsemanage.mk and generate proper pkg-config files.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch the Makefiles to make PREFIX and DESTDIR follow standard
semantics to get rid of DESTDIR during compile time in
libsepol.mk and generate proper pkg-config files.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All the rtlwifi firmware files were not installed, so added the
missing ones.
Signed-off-by: Romain Reignier <rom.reignier@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Supposedly, older kernels could require that an older firmware be used,
so leave to the user the opportunity to choose the one they require.
Simplify the pattern as suggested by Peter. Thanks!
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The C++ REST SDK is a Microsoft project for cloud-based client-server
communication in native code using a modern asynchronous C++ API design.
This project aims to help C++ developers connect to and interact with
services.
This package is licensed under the MIT package and depends on BOOST
and OpenSSL/LibreSSL.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FlatBuffers is an efficient cross platform serialization
library for C++, C#, C, Go, Java, JavaScript, PHP, and
Python. It was originally created at Google for game
development and other performance-critical applications.
http://google.github.io/flatbuffers/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Store the list of detected licence files in the main object and
automatically add their sha256 checksums when creating *.hash file.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The aoetools are programs for users of the ATA over Ethernet (AoE)
network storage protocol, a simple protocol for using storage over an
ethernet LAN.
Tested on Beaglebone Black.
Build tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- fix check-package warnings
- use SPDX license code, GPL-2.0
- use github helper
- pass TARGET_CONFIGURE_OPTS instead of just CC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, only post-build and post-image scripts were tested, each with
their own test-script.
The two test-scripts only differ in the name of the log file they
create, and it is based on the name of the script, so it is easy to
share the script.
This allows us to easily re-use it for testing post-fakeroot scripts.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot's "make nconfig" command stopped working a while ago on
Gentoo systems. Running the command would result in a crash.
The issue is caused by lxdialog's cflags which are also used to build
nconfig; It would detect *ncursesw* and turn on WIDECHAR support --
but the Makefile would still link to plain *ncurses* while building
nconfig (which was built without WIDECHAR support).
This would cause a crash after using *wattrset* on a WINDOW instance.
WIDECHAR *wattrset* would try to set the _color member in the WINDOW
struct which does not exist in the NON-WIDECHAR ncurses instance. It
would end up clobbering data outside the struct (usually _line entries).
An upstream patch fixes the issue, so we're applying it to Buildroot's
kconfig.
Signed-off-by: Guillermo A. Amaral <g@maral.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two patches from upstream to fix a build issue when building an
example. Ideally, the examples should not be build at all. However,
upstream disliked the idea of adding configure options like
`--disable-examples` [1]. So we'll make do with the patches and force a
autoreconf.
Additionaly, the signature was checked and a hash for the license file
is added.
[1] https://github.com/hercules-team/augeas/issues/535
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a file is listed to be installed but is missing from the package
source currently the first tar command exits with error code but it is
ignored and the build succeeds.
This issue by itself is minor because those listed files that are
present in the package source get installed to the target.
But the code is currently error prone, e.g. to a typo in the file list.
Fix this by first creating a tarball in the build directory and then
installing it, instead of using a pipe between the two tar invocations.
Also use && between the commands, so the first command that exits with
error code fails the build.
Since the two tar invocations remain in use, the desired behavior
remains the same:
- list of files can contain *;
- list of files can contain file inside path, and the path is then
replicated in the target;
- symlinks are not followed but are installed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Sergey Matyukevich <geomatsi@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's broken for the last 3 version bumps, since
1c9846ecc9 "linux-firmware: Bump to the latest version"
Fix it by updating the name of the file to install.
Do not use * since it would install also old versions that would take
1MB extra space in the target.
A comment to remember to update the file name when bumping the package
is not needed because a previous patch in the series makes the build
to fail for missing file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a file is listed to be installed but is missing from the package
source currently the first tar command exits with error code but it is
ignored and the build succeeds.
This issue by itself is minor because those listed files that are
present in the package source get installed to the target.
But the code is currently error prone, e.g. to a typo in the file list.
Fix this by first creating a tarball in the build directory and then
installing it, instead of using a pipe between the two tar invocations.
Also use && between the commands, so the first command that exits with
error code fails the build.
Since the two tar invocations remain in use, the desired behavior
remains the same:
- list of files can contain *;
- list of files can contain file inside path, and the path is then
replicated in the target;
- symlinks are not followed but are installed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When bash is selected, /bin/bash is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connexions for users using bash as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Reported-by: Jeremy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, our jobs on the gitlab-ci infra are running as root, which is
problematic for two reasons:
- this is not the usual way Buildroot is built;
- it may miss issues where running as non-root is problematic.
So, complement our Dockerfile with directives to add a new user and run
everything as that user, as demonstrated by this build job:
https://gitlab.com/ymorin/buildroot-ci/-/jobs/46929562
Additional, enforce an UTF-8 locale while running.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a genimage.cfg to create a working sdcard.img for the ci20
hardware. We also need a uboot-env.txt to create the partition for
the uboot environment.
Update the board/ci20/readme.txt with the related information. Remove
the tftp netboot description from the readme as it is already to
complicated for a basic bootable example.
Signed-off-by: Johannes Schmitz <johannes.schmitz1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the metaparse module as it is header only library now. No need for
legacy handling as the module is available unconditionally in Boost.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_BUILDROOT_INET_IPV6 has been removed with the commit [1].
Since this option is still in br-powerpc-internal-full config-fragment,
the powerpc configuration is droped by autobuild-run script:
WARN: toolchain can't be used
Missing: BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
[Sat, 06 Jan 2018 03:03:43] WARN: failed to generate configuration
[1] 4bcacfd2c0
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use spdx_lookup package to compare packages' license file texts
with SPDX database.
This feature is optional.
Bonus: fix wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like the previous commit did:
c9ecdd2b96 gpu-viv-bin-mx6q: fix compiling issues with EGL_API_FB
Difference is that in latest package, eglvivante.h is included after
a EGL_API_FB check in eglplatform.h, giving the following error:
/.../sysroot/usr/include/EGL/eglplatform.h:146:10:
fatal error: X11/Xlib.h: No such file or directory
#include <X11/Xlib.h>
Also, this patch introduce IMX_GPU_VIV_FIXUP_PKGCONFIG which fixes
the pkgconfig files (for some reason default egl.pc file isn't the
same as the one for fb target).
Finally, this patch removes references to libVIVANTE which is now
replaced by libVDK.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch 0001-Fix-SHA256-hash-verification.patch.
Re-enable support for Lua 5.1 and LuaJIT, which was removed in version 2017.09
because of compatibility issues [1]. Meanwhile, the issues have been resolved
upstream [2].
Note, that `CONFIG_HANDLER_IN_LUA` is now supported by Lua 5.1/LuaJIT, too.
Add a fixup command `SWUPDATE_SET_LUA_VERSION` to set the correct base name for
the Lua/LuaJIT pkg-config file used by the swupdates config option `LUAPKG`.
Fix a small type in the help text:
'in my mind' -> 'in mind'.
Regenerated the .config script by doing:
```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.
[1] http://patchwork.ozlabs.org/patch/795958/
[2] 7b49b8dc59
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only busybox and sysvinit handle the BR2_TARGET_GENERIC_GETTY_TERM and
BR2_TARGET_GENERIC_GETTY_OPTIONS options; the other init systems do
not.
So, protect those options behind appropriate dependencies on busybox
or sysvinit.
Fixes#10301.
Reported-by: Michael Heinemann <posted@heine.so>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#10216
Building mcookie generates a warning about possible wrong arguments to
memset:
mcookie.c:207:26: warning: argument to ‘sizeof’ in ‘memset’ call is the same expression
as the destination; did you mean to dereference it? [-Wsizeof-pointer-memaccess]
memset(ctx, 0, sizeof(ctx)); /* In case it's sensitive */
ctx is a pointer to a structure, so the code should use the size of the
structure and not the size of the pointer when it tries to clear the
structure, similar to how it got fixed upstream back in 2009:
https://git.kernel.org/pub/scm/utils/util-linux/util-linux.git/commit/lib/md5.c?id=6596057175c6ed342dc20e85eae8a42eb29b629f
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to commit 8ad38a4fc2
("package/lz4: bump version to r131"), the lz4 package was installing
both libraries and programs, but this commit changed the behavior to
only install libraries.
The contributor might have been confused by the fact that the build
command was "$(MAKE) ... -C $(@D) liblz4", suggesting that only the
library was built. But since the install command was "$(MAKE) ... -C
$(@D) install", the programs were effectively built as part of the
install step, and installed as well.
Since it makes sense for lz4 to also installs its programs, this
commit adjusts the package accordingly.
It is worth mentioning that using the "all" target during the build
step is important. Indeed, otherwise the programs/Makefile has a
"default" target that doesn't build everything (especially the lz4c
program) and it end up being built as part of the install step, due to
how the makefile dependencies are handled in the lz4 project. To make
sure that everything gets built during the build step, we explicitly
use the "all" target.
Fixes bug #9996
Reported-by: Jamin Collins <jamin.collins@gmail.com>
Initial-analysis-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As usual, https://github.com/kergoth/tslib/releases has the changelog
summary.
This release includes a new plugin "invert" that is being built by
default; so we add that to the list of statically compiled in plugins
for static builds.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current busybox.mk explicitly removes S01logging if CONFIG_SYSLOGD
is disabled in the Busybox configuration. However:
- This causes the removal of the S01logging script potentially
installed by another package (currently syslog-ng, rsyslog and
sysklogd can all install a S01logging script).
- We generally don't try to clean-up stuff that we may have installed
in a previous make invocation and that is no longer needed
following a configuration change.
Fixes bug #10176
Reported-by: Karl Krach <mail@kkrach.de>
Fix-provided-by: Karl Krach <mail@kkrach.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kmsxx build system can only build either shared libraries *or*
static libraries, not both. Therefore, the build currently fails when
BR2_SHARED_STATIC_LIBS=y because we try to install the static
libraries, that haven't been built.
We fix this by not installing the static libraries when
BR2_SHARED_STATIC_LIBS=y, making BR2_SHARED_STATIC_LIBS=y essentially
the same as BR2_SHARED_LIBS=y for this package.
Fixes bug #10331.
Reported-by: Frederic MATHIEU <frederic.mathieu@dualis.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The oss.sgi.com mailing list archives are no longer available, point
to spinics.net instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains mitigations for CVE-2017-5753 and CVE-2017-5715, the
vulnerabilities known as the "Spectre" attack. It also contains a fix
which allows building the reference documentation with newer gtk-doc
versions.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/01/10/webkitgtk2.18.5-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
<pkg>-<pkg-version>.tar.gz is the default value, so there's no need to
explicitly specify it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
<pkg>-<pkg-version>.tar.gz is the default value, so there's no need to
explicitly specify it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to the other compressors. Notice that we use the -l (legacy format)
for Linux kernel initrd compatibility.
Lz4 decompression is supported by the Linux kernel since 3.11.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 4932c8a7cc introduced the
core-dependencies target to make sure that the dependencies.sh script
runs before we attempt to compile any host tool, so that the absence of
a compiler is properly detected. However, this relied on the
left-to-right evaluation of dependencies. This will no longer be true
when we enable top-level parallel build.
Fix this by letting DEPENDENCIES_HOST_PREREQ depend on
core-dependencies.
Note that it is not possible to remove the
dependencies <- core-dependencies. Indeed, it is possible that
DEPENDENCIES_HOST_PREREQ is completely empty, and in that case we still
need to check core-dependencies.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dependencies.sh uses HOSTCC_NOCCACHE directly, and this variable is
exported from the top-level Makefile, so there is no need to pass
HOSTCC to it. HOSTCC is not used at all in dependencies.sh.
Thus, we also no longer need to apply the HOSTCC override for
core-dependencies. The core-depencies rule doesn't use HOSTCC or
HOSTCXX.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This feature is not used by anyone in the core developpers and makes a
drastic simplification of the pkg-download infrastructure harder.
The future patch will move much of what's in the current pkg-download.mk
file into the dl-wrapper which is a shell script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
* AST-2017-014: Crash in PJSIP resource when missing a contact header A
select set of SIP messages create a dialog in Asterisk. Those SIP
messages must contain a contact header. For those messages, if the header
was not present and using the PJSIP channel driver, it would cause
Asterisk to crash. The severity of this vulnerability is somewhat
mitigated if authentication is enabled. If authentication is enabled a
user would have to first be authorized before reaching the crash point.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-13185-1475-1515-and-1318-cert2-now-available-security
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#10556
The --with-crypto handling in ntp only works with libopenssl, not with
libressl, where it ends up with compilation issues like:
ntp_control.c:(.text+0x64): undefined reference to `EVP_MD_CTX_new'
ntp_control.c:(.text+0x10c): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `bighash':
ntp_crypto.c:(.text+0x2e8): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x328): undefined reference to `EVP_MD_CTX_free'
libntpd.a(ntp_crypto.o): In function `crypto_verify':
ntp_crypto.c:(.text+0x6cc): undefined reference to `EVP_MD_CTX_new'
ntp_crypto.c:(.text+0x710): undefined reference to `EVP_MD_CTX_free'
ntp_crypto.c:(.text+0x72c): undefined reference to `EVP_MD_CTX_free'
So ensure we only pass --with-crypto when libopenssl is used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are three 256 color terminfo files that buildroot only installs
if ncurses is configured with wide character support, which also
enables ext-color. There is a fourth 256 color terminfo file that does
not depend on wchar suport and is always installed.
This changes that to always install all four 256 color terminfo files.
When ncurses has ext-colors enabled,it allows 256 fg and bg colors at
the same time. Without ext-colors, it is still possible to use the 256
color terminfo files and one can get a combination of fb and bg colors
that equals up to 256, e.g. 256 fg colors on one background or 16 fg
and 16 bg colors.
In short, the 256 color files work fine without wchar or ext-color
support and support more colors than the normal xterm, etc. terminfo
files. It's common today for the default terminal to use
xterm-256color and it's nice if thinks like vim and top work out of
the box.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
14.6.1:
* AST-2017-005 (applied to all released versions): The "strictrtp" option in
rtp.conf enables a feature of the RTP stack that learns the source address
of media for a session and drops any packets that do not originate from
the expected address. This option is enabled by default in Asterisk 11
and above. The "nat" and "rtp_symmetric" options for chan_sip and
chan_pjsip respectively enable symmetric RTP support in the RTP stack.
This uses the source address of incoming media as the target address of
any sent media. This option is not enabled by default but is commonly
enabled to handle devices behind NAT.
A change was made to the strict RTP support in the RTP stack to better
tolerate late media when a reinvite occurs. When combined with the
symmetric RTP support this introduced an avenue where media could be
hijacked. Instead of only learning a new address when expected the new
code allowed a new source address to be learned at all times.
If a flood of RTP traffic was received the strict RTPsupport would allow
the new address to provide media and with symmetric RTP enabled outgoing
traffic would be sent to this new address, allowing the media to be
hijacked. Provided the attacker continued to send traffic they would
continue to receive traffic as well.
* AST-2017-006 (applied to all released versions): The app_minivm module has
an “externnotify” program configuration option that is executed by the
MinivmNotify dialplan application. The application uses the caller-id
name and number as part of a built string passed to the OS shell for
interpretation and execution. Since the caller-id name and number can
come from an untrusted source, a crafted caller-id name or number allows
an arbitrary shell command injection.
* AST-2017-007 (applied only to 13.17.1 and 14.6.1): A carefully crafted URI
in a From, To or Contact header could cause Asterisk to crash
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11252-13171-1461-116-cert17-1313-cert5-now-available-security
14.6.2:
* AST-2017-008: Insufficient RTCP packet validation could allow reading
stale buffer contents and when combined with the “nat” and “symmetric_rtp”
options allow redirecting where Asterisk sends the next RTCP report.
The RTP stream qualification to learn the source address of media always
accepted the first RTP packet as the new source and allowed what
AST-2017-005 was mitigating. The intent was to qualify a series of
packets before accepting the new source address.
For more details, see the announcement:
https://www.asterisk.org/downloads/asterisk-news/asterisk-11253-13172-1462-116-cert18-1313-cert6-now-available-security
Drop 0004-configure-in-cross-complation-assimne-eventfd-are-av.patch as this
is now handled differently upstream (by disabling eventfd for cross
compilation, see commit 2e927990b3d2 (eventfd: Disable during cross
compilation)). If eventfd support is needed then this should be submitted
upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the advisory (https://irssi.org/security/irssi_sa_2018_01.txt):
Multiple vulnerabilities have been located in Irssi.
(a) When the channel topic is set without specifying a sender, Irssi
may dereference NULL pointer. Found by Joseph Bisch. (CWE-476)
CVE-2018-5206 was assigned to this issue.
(b) When using incomplete escape codes, Irssi may access data beyond
the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5205 was assigned to this issue.
(c) A calculation error in the completion code could cause a heap
buffer overflow when completing certain strings. (CWE-126) Found
by Joseph Bisch.
CVE-2018-5208 was assigned to this issue.
(d) When using an incomplete variable argument, Irssi may access data
beyond the end of the string. (CWE-126) Found by Joseph Bisch.
CVE-2018-5207 was assigned to this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Verified experimentally by using exception_ptr with m68k_cf5208 and
looking at the value of ATOMIC_INT_LOCK_FREE. ATOMIC_INT_LOCK_FREE=1,
so the issue is present. Also verified that gcc 7.x fixed it also for
cf5208.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BUILD_SHARED_LIBS option is already handled by the cmake-package
infrastructure, so there is no need to pass it at the package level.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently in Orange Pi boards post-build script is used only to generate
U-Boot boot script and post-image script is used only to generate sdcard
image according to genimage configuration. However both those tasks can
now be handled by generic Buildroot tools:
- BR2_TARGET_UBOOT_BOOT_SCRIPT config options
- support/scripts/genimage.sh script
This patch drops custom scripts replacing them
by generic Buildroot tools.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit fa6c7d1659 ("libdrm: fix
libatomic_ops linking"), a patch was added to switch to
PKG_CHECK_MODULES() to detect libatomic_ops instead of
AC_CHECK_HEADER.
However, as explained in
https://autotools.io/pkgconfig/pkg_check_modules.html:
"In contrast with almost all of the original macros, though, the default
action-if-not-found will end the execution with an error for not having
found the dependency."
This makes the configure script bail out when libatomic_ops is not
available, which is not what we want in libdrm's configure
script. This commit adjusts the PKG_CHECK_MODULES() call to avoid
failing.
Fixes:
http://autobuild.buildroot.net/results/cea/cea777dc997f86c1122c8b818d264215a0e77e5a/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch contains the following changes:
- Remove all three patches, they are included in upstream version
- Add locally calculated sha256 hash
- Remove <pkg>_STRIP_COMPONENTS = 2, there is no leading directory
- Remove <pkg>_AUTORECONF and <pkg>_GETTEXTIZE since all the patches are
being removed.
Signed-off-by: Yair Ben Avraham <yairba@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autotools-based packages that do not need C++ but check for it, and use
libtool, will fail to configure on distros that lack /lib/cpp.
This is the case for example on Arch Linux, where expat fails to build
with:
configure: error: in `/home/dkc/src/buildroot/build/build/expat-2.2.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This is because libtool uses AC_PROC_CXXCPP, which can not be avoided,
and does require a cpp that passes some "sanity" checks (does not choke
on valid input, but does choke on invalid input). So we can use neither
/bin/false nor /bin/true...
We instead need something that can digest some basic C++ preprocessor
input. We can't use the target preprocessor: that does not work, because
it obviously has no C++ cupport:
arm-linux-cpp.br_real: error: conftest.cpp: C++ compiler not
installed on this system
We can however consider that the host machine does have a C++ compiler,
so we use the host' cpp, which is gcc's compiler wrapper that ends up
calling the host's C++ preprocessor.
That would give us a valid C++ preprocessor when we don't have one, in
fact. But autotools will then correctly fail anyway, because there is
indeed no C++ compiler at all, as we can see in this excerpt of a
configure log from expat:
checking whether we are using the GNU C++ compiler... no
checking whether false accepts -g... no
checking dependency style of false... none
checking how to run the C++ preprocessor... cpp
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
libtool.m4: error: problem compiling CXX test program
checking for false option to produce PIC... -DPIC
checking if false PIC flag -DPIC works... no
checking if false static flag works... no
checking if false supports -c -o file.o... no
checking if false supports -c -o file.o... (cached) no
checking whether the false linker (/home/ymorin/dev/buildroot/O/host/bin/arm-linux-ld) supports shared libraries... yes
So, using the host's C++ preprocessor (by way of gcc's wrapper) leads to
a working situation, where the end result is as expected.
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libdnet is an optional dependency, it is only needed if nfq or ipq
module are enabled.
So, if libdnet and libnetfilter_queue are available, enable nfq module
and add a dependency to both packages otherwise disable nfq module.
Moreover, always disable ipq module as libipq is deprecated, it isn't
enable in iptables. Even if it was enabled, libipq.h can't be included
as it makes a reference to linux/netfilter_ipv4/ip_queue.h which is not
available anymore
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also include new boot scripts to match standard distro uboot commands.
Our previous 6x_bootscript and 6x_upgrade used custom variables and
their naming don't make sense now that we target more than i.MX6 CPU.
Therefore those old scripts are marked as legacy and kept for now but
the goal is to deprecate and remove them later.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
1. Upgrade EULA to v18
2. Bugfixes/Optimization
- Update HEVC PARSER 01.00.02/ APE PARSER 00.00.08/ MPEG2 PARSER 04.05.10
1. Delete the useless label in HEVC PARSER.
2. Fix 2 variables' not init in special case for APE PARSER.
3. Fix one struct's not init for MPEG2 PARSER.
- Fix one mp3 can't play on jb4.3_1.1.1-ga
ID3V2 contains a picture larger than 3MB, need to save ID3 data size
in self->m_dwID3V2Size to let parser skip it when starting playback.
- Fix creating parser error
When variable value is negative, if(bytesToRead) will return true,
modify this condition to if(bytesToRead > 0).
Note that this package now includes AARCH64 libraries for the upcoming
i.MX8 CPU family.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
1. Upgrade EULA to v18
2. Bugfix/Optimization
- AACPlus: fixed playbe silence after 1s of stream
- Removed duplicated code in aac_dec/aacplus_dec.
- Removed unused code in flac_dec.
Note that this package now includes AARCH64 libraries for the upcoming
i.MX8 CPU family.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New features:
- Added mutex protection for referencing gctSIGNAL in gckOS_MapSignal to
fix a MT race issue.
- Streamlined GPU address calculation base on MC20 (0/1) and MMU (0/1)
combinations.
- Fixed multiple Android HWC 2.0 rendering issues. Refined HWC 2.0 driver
implementation.
- Improved HWC2.0 composition performance by composing damaged regions
only.
- Enabled offline/online compiler IR assembly dump function for users.
- Implemented the direct rendering support (no-resolve) for Wayland
platform.
- Added EGL_EXT_buffer_age extension for Wayland and fbdev platforms.
- Updated wayland-viv protocol to support tile status sync from client
to server.
- Improved OpenCL 1.2 builtin function support with native GPU
instructions.
- Enabled OpenCL 1.2 API trace dump function controlled by VIV_TRACE
environment variable.
- Support for OpenGL4.0
- Cleaned up driver code issues reported by Klocwork and Coverity.
Full changelog:
http://git.freescale.com/git/cgit.cgi/imx/fsl-arm-yocto-bsp.git/tree/GraphicsChangeLogv6?h=imx-morty
Note that the apitrace tool and the G2D libraries are not part of the
package any longer, so the corresponding options are removed. The G2D
libraries are now provided by a separate package.
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
# gmem_info
... display memory use per PID ...
Also update packages that depended on g2d libraries to match new package
name.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up until now, the G2D libraries were included inside the imx-gpu-viv
package. However, since next version of the i.MX will use a new
hardware IP to do 2D rendering (DPU), the GPU 2D libraries have been
separated from the 3D GPU package.
Tested with the following commands:
# /usr/share/examples/g2d_samples/g2d_multiblit_test
# /usr/share/examples/g2d_samples/g2d_overlay_test
# /usr/share/examples/g2d_samples/g2d_test
# gst-launch-1.0 videotestsrc ! imxg2dvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nilfs-utils use clock_nanosleep(), which comes with NPTL threads. We
keep the dependency on threads, because sem_open() is really related
to thread support. The dependency on NPTL for clock_nanosleep() might
be lifted in the future, as it seems to be a bug in uClibc-ng.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
[Thomas: update Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
daq can be compiled without libpcap thanks to --enable-pcap-module and
--disable-pcap-module options.
libpcap is just a mandadory dependency of snort.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream switched to cmake.
Add upstream patch that removes run of target binary on the host.
Cc: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Out-of-tree driver has been updated according to mac80211
and timer API changes in the upcoming Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Out-of-tree driver has been updated according to timer API changes
in the upcoming Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10631
The gstreamer plugins were recently bumped to 1.12.4, but the main
gstreamer1 package not. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The existing zlib package is renamed to libzlib, and zlib is turned
into a virtual package. This is done in preparation to the
introduction of zlib-ng as an alternative implementation.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_ZLIB as suggested by Yann
E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cjson 1.6.0 added the BUILD_SHARED_AND_STATIC_LIBS option which is OFF
by default so set it depending on BR2_SHARED_STATIC_LIBS value.
If BUILD_SHARED_AND_STATIC_LIBS is set to OFF, cjson uses the standard
BUILD_SHARED_LIBS option which is passed by the cmake-package
infrastructure.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, to register a filesystem, one has to call:
$(eval $(call ROOTFS_TARGET,blabla))
This is very unlike the package infrastructure, where the name of the
package is automatically guessed by the infra.
It turns out that we can now do that for the filesystem infra too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the ubifs-in-ubi-image ("UBI image" thereafter) filesystem
is half an option of the ubifs filesystem, half a filesystem on its
own: the config options are options of the ubifs filesystem, but the
.mk code is in a separate .mk and registers a real filesystem.
Make it a full filesystem on its own, in its own directory tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure that the pie charts produced by 'graph-build' and 'graph-size'
targets are sorted on the size of each piece of the pie. Otherwise, making
visual analysis is difficult, as one needs to look at the legends of each
piece and do the sorting manually in their head.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It needs mkzftree from zisofs-tools, so we add a dependency to it, and
we call that one explicitly (to avoid using the one from the host in
PATH).
It also needs the the uncompressed kernel image, but because it is
already in target/ so it gets compressed by mkzftree. We have two
options:
- compress everything but the kernel image,
- compress everything, kernel included, and recopy it later.
We choose the latter, because it is the simplest solution. So, we always
define the kernel-copy hook, but only register it when needed.
Finally, it needs a kernel with support for transparent
(de)compression, so we update the existing test config.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To support transparent (de)compression in iso9660, we need mkzftree,
which comes from zisofs_tools, biundled with cdrkit.
However, cdrkit is a cmake package, but zisofs_tools is an autotools
package, so we need a separate package just to get mkzftree, but it is
pretty lightweight.
We just need the host variant for now,so we just add that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add entry to DEVELOPERS file, rename to zisofs-tools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch 0003-configure-Makefile.am-use-pkg-config-to-discover-lib.patch
provided by Thomas Petazzoni handling libatomic_ops linking when needed.
Fixes [1]:
CCLD etnaviv_cmd_stream_test
../../etnaviv/.libs/libdrm_etnaviv.so: undefined reference to `AO_store_full_emulation'
../../etnaviv/.libs/libdrm_etnaviv.so: undefined reference to `AO_fetch_compare_and_swap_emulation'
collect2: error: ld returned 1 exit status
[1] http://autobuild.buildroot.net/results/92e074c49417261843eef95872ff935a56077c98
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, meson will set the c_link_args and the cpp_link_args to the
value of TARGET_LDFLAGS, even when it's not defined.
This creates a malformed array ["",] which will break any package
building using meson/ninja.
We fix that by using an empty replacement when the corresponding values
are empty.
Reported-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[yann.morin.1998@free.fr: alternate implementation, suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Adam Duskett aduskett@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The isag tool has been removed in version 11.5.5; no need to avoid its
installation anymore.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Additionally added myself to ffmpeg, rpi-firmware and rpi-userland as
changes to mpv may require updates or other changes to these packages
and vice-versa.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FFMPEG_DEPENDENCIES shouldn't be used in mpv.mk. This typo was
introduced in commit 8e741412d4 ("mpv:
add support for Raspberry Pi "rpi" output").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mpv now compiles with the "rpi" video driver that provides hardware
acceleration on the Raspberry Pi.
Tested working on a Raspberry Pi 1 Model B+ and Zero.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
[Thomas: drop unneeded dependency on rpi-firmware.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rpi-userland provides the user-space blobs needed for OpenGL and al.,
rpi-firmware is not needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The old Atom target is not really fitting for recent Atom CPUs based
on Silvermont, Airmont or Goldmont. Those have more in common with
older Desktop CPUs than old Atoms.
Signed-off-by: Norbert Lange <norbert.lange@andritz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- propagate dependencies of selected packages in Config.in
- add missing Config.in comment about dependencies
- add missing upstream URL in Config.in
- add missing comment header in .mk file
- remove --disable-nls from configuration options, it is taken care
of by the package infrastructure
- remove --disable-dependency-tracking, it is taken care of in the
package infrastructure
- add $(TARGET_NLS_DEPENDENCIES) to <pkg>_DEPENDENCIES, since gconf
has optional NLS support
- add host-intltool to <pkg>_DEPENDENCIES, since gconf needs
intltool-update
- fix license: it's LGPL-2.0+, not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upcoming per-package SDK functionality is heavily based on the
fact that HOST_DIR, STAGING_DIR and TARGET_DIR are evaluated during
the configure/build/install steps of the packages. Therefore, any
evaluation-during-assignment using := is going to cause problems, and
need to be turned into evaluation-during-use using =.
This patch fix up one such instance in the external toolchain code.
This change is independent from the per-package SDK functionality, and
could be applied separately.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pkg-config wrapper script is currently generated with absolute
paths to $(STAGING_DIR). However, this will not work properly with
per-package SDK, and each package will be built with a different
STAGING_DIR value.
In order to fix this, we adjust how the pkg-config wrapper script is
generated, so that it uses a relative path to itself: the sysroot (i.e
STAGING_DIR) is always located in $(path of
pkg-config)/../$(STAGING_SUBDIR).
This change is independent from the per-package SDK work, and could be
applied independently from it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes in this version:
- Small improvement and bug fixes.
- Install rfkill at /usr/sbin (thus overriding the one eventually
installed by BusyBox).
Drop the md5 patch, already applyed upstream.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building with dynamic library support, i2c-tools utilities are
linked against the libi2c.so library. Current i2c-tools install commands
don't take this into account, which leads to the following run-time
error:
eeprog: error while loading shared libraries: libi2c.so.0: cannot open shared object file: No such file or directory
Use the native install target to fix that.
Cc: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This debian fork of netcat includes the kernel UAPI inet6 header. This
header conflicts with the existing libc inet header and causes
redefinition of structures when they are both included.
The compiler raises the following error:
/home/buildroot/build/instance-0/output/host/x86_64-buildroot-linux-gnu/sysroot/usr/include/linux/in6.h:30:8: error: redefinition of 'struct in6_addr' struct in6_addr {
>From version 3.12 of linux, the kernel UAPI header has mechanisms in
libc-compat.h to prevent such situations (see __UAPI_DEF_SOCKADDR_IN6
macros).
Unfortunately the build is broken when toolchains do not satisfy at least
the linux headers condition (>= 3.12).
The package now depends on the toolchain headers at least 3.12.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
[Thomas: update Config.in comment about the 3.12 headers dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig is dumped at the very beginning of the build log, but the
resulting .config is still interesting to get, in case some settings did
not end up in there (e.g. because of the host gcc version, or because of
conflicting settings, or because the Config.in changed without the tests
being updated, or...).
So, add the .config to the list of artefacts to save.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If we don't explicitly disable SELinux support in the host-tar build,
it might pick up system-wide installed SELinux libraries, causing the
tar in HOST_DIR/bin/ to depend on the host SELinux libraries, which is
not desirable to make the SDK portable/relocatable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A json library that aims to make json feel like a first class data
type using C++11, json for modern c++ is a easy to use, flexible,
modern json library.
Design goals include:
- Intuitive syntax. In languages such as Python, JSON feels like a
first class data type. All the operator magic of modern C++ is used
to achieve the same feeling in c++.
- Trivial integration. The whole code consists of a single header file
json.hpp. That's it. No library, no subproject, no dependencies, no
complex build system. The class is written in vanilla C++11. All in
all, everything should require no adjustment of compiler flags or
project settings.
- Serious testing. The class is heavily unit-tested and covers 100% of
the code, including all exceptional behavior. Furthermore, it is
checked with Valgrind that there are no memory leaks. To maintain
high quality, the project is following the Core Infrastructure
Initiative (CII) best practices.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas:
- use "json-for-modern-cpp" everywhere as the name of the package
- add <pkg>_INSTALL_TARGET = NO since it's a header only library]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wolfSSL embedded SSL library is a lightweight and portable
SSL/TLS library.
Tested on Beaglebone Black using a tool called testsuite that
comes with wolfssl source code inside the testsuite/ directory.
To build it, we have to pass --enable-examples in the configure,
and then manually copy the binary to the rootfs. Also, to use
this tool, you will we need to copy the certs/* directory to the
rootfs.
Build-tested with test-pkg script.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
First, the .pc file was so far fixed as a post-configure hook of the
matchbox-fakekey package, by directly tweaking the .pc file installed in
staging by matchbox-lib. That's uterly wrong and bad.
So, we move the fix to matchbox-lib.
Second, it was incorreclty tweaking the .pc file when xlib_libXft was
not enabled, because only then a path to staging was present.
Third, even when xlib_libXft was enabled, the tweaking was still wrong,
because unnecessary.
Fix all that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
matchbox-lib build-depends on xlib_libXext, but forgets to select it.
It also build-depends on expat without selecting it, but it does need
it.
Fix that: select xlib_libXext, remove expat.
Add myself to developpers for matchbox packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This requirement is likely to go away in the future. However, declaring
this fact explicitly for now fixes a number of test-pkg failures.
Signed-off-by: Mario Lang <mlang@blind.guru>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following error:
./configure: line 14978: .../host/bin/pkg-config: No such file or directory
Signed-off-by: Mario Lang <mlang@blind.guru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The regular expression that drops the -I flag from the output of
pkg-config --cflags-only-I doesn't work properly as it is too naive:
it breaks a path if it contains -I:
$ echo "-I/usr/Some-Install-Location/include" | sed 's/-I//g'
/usr/Somenstall-Location/include
$ echo "-I/usr/Some-Install-Location/include" | sed -re 's/(^|\s)-I\s*(\S+)/\1\2/g'
/usr/Some-Install-Location/include
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When compiling libtirpc, without RPC support available on the host
machine, the build of the rpcgen host program because it cannot find
the netconfig.h and rpc/types.h headers. Instead of relying on the
system-provided ones, let's use the ones included in the libtirpc
source code by patching the rpcgen build logic.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas: reword commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch cherry-picked from upstream, can be removed upon next release.
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas: move patch out of per-version directory.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps i2c-tools to version 4.0 and adds a couple of
new commands named i2ctransfer and eeprog.
It adds also several upstream commits not included in the release
that fix static compilation issues and parallel build issues.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The non-SMP scheduler was deprecated with the Erlang/OTP 20.0 release and
slated for removal with the next major Erlang release. Since the non-SMP
scheduler isn't even built anymore, this option no longer has the
intended effect of saving space or compile time. The SMP scheduler
supports both SMP and non-SMP processors, so removing the option will
not break any platforms.
We do not need to add a legacy entry, because the new behavior is the
same as with the option previously set (i.e. SMP enabled).
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides the host variant of the Meson Build System, an
open source build system meant to be both extremely fast, and as user
friendly as possible.
More precisely, Meson creates configuration files for the Ninja build
system.
Besides building Meson, it generates a configuration file
("$(HOST_DIR)/etc/meson/cross-compilation.conf") to be used when
cross-compiling a Meson-based project.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we release 2018.02 at the end of this cycle, those entries will
have been removed for more than five years, so we can drop them now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This line has been sitting there unchanged for years now, but it does
not follow current best pratices, that is:
- do not use imediate assignment,
- split lines longer than ~80 chars.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Add a hash for the license file.
- Change the URL from pqxx.org to the official GitHub repository, as releases
are no longer being posted to the old download mirror.
- Remove the patch, this has been fixed in the upstream code for some time.
- Remove AUTORECONF, as it is no longer necessary because the patch has been
removed.
- Require gcc >= 4.7, as C++11 is now mandatory:
http://pqxx.org/development/libpqxx/
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use upstream provided tarball; drop autoreconf.
Drop -Werror removal patch; json-c builds fine with gcc 7 without this
patch.
Drop upstream libm patch.
Drop --disable-oldname-compat; removed upstream.
Add license file hash.
Enable parallel build. The commit introducing MAKE1, ecd0f65af9
(json-c: bump to version 0.11) does not explain the reason for that. A
sequence of a few builds on a multi-core system never faild.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump mfgtools to include the fix [1] for the C++ build issue reported
by the autobuilders.
This bump include only 4 small commits fixing memory leak and this
build issue.
Remove CPOL.htm (removed upstream) from MFGTOOLS_LICENSE_FILES but CPOL
license is still valid.
Add the README.txt file to MFGTOOLS_LICENSE_FILES since it contains
licensing informations:
Licenses:
- CPOL: MfgToolLib/XmlLite.CPP and XmlLite.h
- BSD: Others.
Add license file hash.
[1] b370a43e54
Fixes:
http://autobuild.buildroot.net/results/7c2bbbe13ab315684f3502afd96958a76879b1d5
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use https URL to avoid redirect.
Drop non-LFS compatibility patch; we do not support non-LFS build
anymore.
Add license files hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch; issue fixed upstream.
Add license file hash.
Revert back to .tar.gz since that is what upstream provides.
Remove autoreconf; tarball has configure script.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cryptsetup is available under musl since commit f71507d41b (lvm2:
make basic package available under musl). Enable luksmeta as well.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the now mandatory json-c depencecy. Propagate to reverse
dependencies.
Drop the no longer needed patch.
Add license files hashes.
[Peter: propagate _HAS_SYNC_4 dependency to comments as pointed out by
Thomas]
Cc: Martin Hicks <mort@bork.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old SGI site is not accessible anymore. Use the link from the README
file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add licenses and hashes for these licenses.
Enabled build with musl; the non standard types have been removed
upstream. Fixes bug #10581.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains fixes for CVE-2017-13866, CVE-2017-13870, CVE-2017-7156, and
CVE-2017-13856. Additionally, this release brings improvements in the
WebDriver spec-compliance, plugs several memory leaks in its GStreamer based
multimedia backend, and fixes a bug when handling cookie removal.
Release notes can be found in the announcement:
https://webkitgtk.org/2017/12/19/webkitgtk2.18.4-released.html
More details about the security fixes are provided in the following
WebKitGTK+ Security Advisory report:
https://webkitgtk.org/security/WSA-2017-0010.html
Last but not least, this new release includes the fix for honoring the
CMAKE_BUILD_TYPE value from CMake toolchain files and the corresponding
patch is removed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The (deprecated) libsamplerate support is not enabled unless
--enable-samplerate is passed to configure. Fix this.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Put together alsa-lib dependency and configure option code. As a side
effect we now avoid alsa-lib dependency when the required support in
alsa is missing.
Use positive logic.
Explicitly enable alsa support when available.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-13672: QEMU (aka Quick Emulator), when built with the VGA display
emulator support, allows local guest OS privileged users to cause a denial
of service (out-of-bounds read and QEMU process crash) via vectors involving
display update.
CVE-2017-15118: Stack buffer overflow in NBD server triggered via long
export name
CVE-2017-15119: DoS via large option request
CVE-2017-15268: Qemu through 2.10.0 allows remote attackers to cause a
memory leak by triggering slow data-channel read operations, related to
io/channel-websock.c.
For more details, see the release announcement:
https://lists.nongnu.org/archive/html/qemu-devel/2017-12/msg03618.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi PC2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Zero Plus2
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Prime
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Orangepi Win/Win Plus
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: zhaoyifan <zhao_steven@263.net>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for Olimex A64-OLinuXino
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Tsvetan Usunov <usunov@olimex.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for FriendlyARM Nanopi NEO2 board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for FriendlyARM Nanopi A64
board with below features:
- U-Boot 2017.11
- Linux 4.14
- Default packages from buildroot
Cc: Yuefei <yftan@friendlyarm.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This would make the unicode challenged menuconfig show something
sensible.
Split the sentence for the text to make sense.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The receive_xattr function in xattrs.c in rsync 3.1.2 and 3.1.3-development
does not check for a trailing '\0' character in an xattr name, which allows
remote attackers to cause a denial of service (heap-based buffer over-read
and application crash) or possibly have unspecified other impact by sending
crafted data to the daemon.
For more details, see:
https://bugzilla.samba.org/show_bug.cgi?id=13112
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add drivers for Atheros 10k (QCA998X) chipset.
Both firmware versions are imported, and unused should be pruned as
required.
[Peter: use upper case 'K' in symbol name]
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ConsoleKit module is loaded by default from the default.pa
configuration file, but its initialization fails because Buildroot has
no ConsoleKit package yet. This breaks per-user pulseaudio daemon.
The default.pa configuration load module-console-kit only when it
exists. Remove module-console-kit to fix pulseaudio per-user startup.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lldpd currently depends on a C++ compiler to configure properly, but
the package doesn't select that option, so builds fail if
BR2_TOOLCHAIN_BUILDROOT_CXX is not selected with following errors:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in `/home/dkc/src/buildroot/build-zii/build/lldpd-0.9.4':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
This package actually builds fine without C++, so drop this check in
configure.ac. Attached patch has already been accepted upstream [1].
[1] https://github.com/vincentbernat/lldpd/pull/261
[Peter: adjust autoreconf comment]
Signed-off-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Reviewed-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit cb7aa25df8 has disabled upnp support
as --disable-upnp and --enable-upnp are both set if libupnp or libupnp18
is enabled
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ATF >= 1.3 builds a host program called fiptool which uses
OpenSSL, so we need to build host-openssl. We could have made it an
optional dependency like U-Boot does, but since most ATF versions are
going to be >= 1.3 in the near future, we simply make host-openssl a
mandatory dependency.
However, the ATF build system is not very good, and you can't easily
pass flags that will affect the build of host programs. Therefore, we
take the approach of building fiptool separately before triggering the
real build process.
It would obviously be better to fix ATF itself, but as usual with
those bootloader packages, we fetch different versions depending on
the platform/configuration, making it difficult to use patches.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/44868961
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-pycparser is mentioned in setup.py as install_requires, so
select it in Config.in.
As python-cffi will be installed with python-crossbar's dependencies,
remove it from python-crossbar's Config.in.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iproute2 renamed the configure script output file to config.mk. Update
the config tweaking code accordingly.
The configure script now detects xtables correctly, drop this part.
Add a comment to explain the TC_CONFIG_XT disable tweak.
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the ordering of the Config.in option properties, as
reported by check-package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the warnings reported by check-package on the help
text of all package Config.in files, related to the formatting of the
help text: should start with a tab, then 2 spaces, then at most 62
characters.
The vast majority of warnings fixed were caused by too long lines. A
few warnings were related to spaces being used instead of a tab to
indent the help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
[Thomas:
- wrap too long CONF_OPTS line that disables all the language
bindings
- use an intermediate BRLTTY_TEXT_TABLE variable to store the
qstripped version of BR2_PACKAGE_BRLTTY_TEXT_TABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- switch to the autotools build system, which supports static linking
properly
- add <pkg>_LICENSE_FILES
- add sha256 hash for the tarball, in addition to the md5 one
- add license file hash
- squash DEVELOPERS file addition]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gdb install target installs dynamic versions of libbfd and
libopcode, accidentally overwriting the binutils provided versions
(gdb itself links against the bundled static ones to avoid
version problems, so the dynamic ones are un-needed).
Prevent the installation by using the '--disable-install-libbfd'
configure option.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Peter, using cp during the installation isn't correct,
as it follows symbolic links, potentially over-writing the busybox
binary through its traceroute symbolic link. To avoid that, we pass
INSTALL=$(INSTALL) during the installation step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested on Beaglebone Black.
Build-tested with test-pkg.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Thomas:
- remove file removal in install command
- use DESTDIR and prefix instead of just prefix in install command.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add MacchiatoBin board by SolidRun. This board is based on Marvell
Armada 8040 SoC. Board support package includes the following
two options: mainline and vendor BSPs.
Mainline BSP:
- Marvell ATF v1.3-armada-17.10
- mainline U-Boot v2017.11
- mainline Linux kernel v4.14.4
Marvell BSP with more hardware support enabled:
- Marvell ATF v1.3-armada-17.10
- Marvell U-Boot based on v2017.03
- Marvell Linux kernel based v4.4.52
More details about this board are available on wiki:
- http://wiki.macchiatobin.net
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: misc tweaks in readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Release notes: https://mariadb.com/kb/en/mariadb-10129-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10129-changelog/
Fixes the following security vulnerabilities:
CVE-2017-10378 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.57 and earlier, 5.6.37 and earlier and 5.7.11 and earlier. Easily
exploitable vulnerability allows low privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or frequently
repeatable crash (complete DOS) of MySQL Server.
CVE-2017-10268 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Replication). Supported versions that are affected are
5.5.57 and earlier, 5.6.37 and earlier and 5.7.19 and earlier. Difficult to
exploit vulnerability allows high privileged attacker with logon to the
infrastructure where MySQL Server executes to compromise MySQL Server.
Successful attacks of this vulnerability can result in unauthorized access to
critical data or complete access to all MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version includes minor fixes and improvements but is otherwise
compatible.
It does not rely on xlocale.h so we drop that patch (it was merged).
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 0542bb79e8 (uboot: Support multiple environment source files),
missing user-supplied environment source files is no longer detected.
This is because we cat them all, and feed the concatenation to the stdin
of mkenvimage. So, if one source file is missing, the cat exits in error,
but the compound command exits with the exit code of the last command,
which is that of mkenvimage, which happens to be happy with whatever it
is fed on its stdin, even is empty.
We fix that by creating a temporary file, that we even leave afterward
for the user to inspect.
We also move it out of the _CMDS block and into a macro of its own, so
that it is easier to write and maintain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a patch from the master branch that fixes userspace calling
through uclibc when making system calls.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mario Lang <mlang@blind.guru>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Thomas: invert ncurses/slang select to avoid a circular dependency,
add BR2_USE_MMU dependency inherited from slang.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Paul Cercueil's address @analog.com is bouncing, so let's use his
personal e-mail address instead for the libiio package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For E.G. post-build / post-image scripts as it generally cannot be expected
to be available on the build host and/or there are some differences in
behaviour between gnupg 1.x / 2.x.
Provide gnupg 1.x instead of 2.x, as it is simpler to build (less
dependencies) and easier to use in post-build / post-image scripts (E.G. no
gpg-agent that keeps running in the background).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Run-time tested on ZedBoard, build-tested on the other boards]
[Peter: also add host-dosfstools / host-mtools to make vfat images]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are about to introduce genimage support for the Zynq boards. For
all of them U-Boot loads the DTB from a file named "devicetree.dtb" so
we need to rename it on the SD card image.
We could use genimage itself to rename files while creating the
image. But this would require a different genimage.cfg for each board,
leading to duplicate code.
Instead let's create a "devicetree.dtb" symlink pointing to the dtb
listed in the configuration. Currently all the Zynq-based boards have
only one DTS configured, but if one had two or more of them, the
symlink would point to the first one.
[Peter: only create symlink if dtb option is available]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's already there, unconditionally, in the list of main dependencies.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These new tests only do build tests, but allow to quickly verify that
the ATF/U-Boot combinations for vexpress, Allwinner and Marvell
platforms all continue to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Marvell Armada 7k/8k SoCs support to arm-trusted-firmware package.
Marvell ATF needs two additional dependencies:
DDR training code and SCP_BL2 image.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: adjust to previous ATF changes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following our feedback, Marvell has added a README.md file into the
branch that contains the firmware. Thereore, this commit bumps the
version to the commit that includes the README.md file (it's the only
change, the firmware files are unmodified), updates
<pkg>_LICENSE_FILES to point to README.md, and adds the hash for this
license files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream Commit:
2017-11-03 16:19:58 +0000
irq.h: fix compilation error due to missing bool type
The following patches were updated/removed.
- 0001-avoid-redefining-PAGE_SIZE.patch is removed, as
it has been merged upstream as of commit 4095fac8
- 0002-x86-kvm-cpu.c-don-t-include-asm-msr-index.h.patch is
removed, as it has been merged upstream as of commit
1cc05b24
- 0003-use-poll.h-instead-of-sys-poll.h.patch is removed,
as it has been merged upstream as of commit 52c22e6e
- 0004-check-for-and-use-C-library-provided-strlcpy-and-str.patch
is removed, as it has been merged upstream as of commit
8f22adc4
- 0005-Fix-call-to-connect.patch is removed, as it has been
merged upstream as of commit d77bd4f4
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List of fixes from the 2.26 branch NEWS files:
CVE-2017-15670: The glob function, when invoked with GLOB_TILDE,
suffered from a one-byte overflow during ~ operator processing (either
on the stack or the heap, depending on the length of the user name).
Reported by Tim Rühsen.
CVE-2017-15671: The glob function, when invoked with GLOB_TILDE,
would sometimes fail to free memory allocated during ~ operator
processing, leading to a memory leak and, potentially, to a denial
of service.
CVE-2017-15804: The glob function, when invoked with GLOB_TILDE and
without GLOB_NOESCAPE, could write past the end of a buffer while
unescaping user names. Reported by Tim Rühsen.
CVE-2017-17426: The malloc function, when called with an object size near
the value SIZE_MAX, would return a pointer to a buffer which is too small,
instead of NULL. This was a regression introduced with the new malloc
thread cache in glibc 2.26. Reported by Iain Buclaw.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some systems, including Marvell Armada 7k/8k SoCs, have a separate
System Control Processor (SCP) for power management, clocks, reset
and system control. ATF Boot Loader stage 2 (BL2) loads optional
SCP_BL2 image into a platform-specific region of secure memory.
This package adds SCP_BL2 firmware for Marvell Armada 7040 and 8040 SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Use "binaries-marvell" in the Config.in prompt and in the .mk file
header.
- Change the license information.
- Adjust license information: it is GPL-2.0 with the FreeRTOS
exception, and therefore can be redistributed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package adds Marvell Armada SoC DDR training algorithms.
This code is not built separately, it is needed as dependency
to build ATF firmware for Marvell Armada SoCs.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas:
- Remove MV_DDR_MARVELL_SRC_SYMLINK, ATF will directly pick up the
mv-ddr-marvell code from where it is.
- Use "mv-ddr-marvell" as the Config.in prompt, and in the comment
header of the .mk file.
- Add upstream URL in Config.in help text
- Adjust license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some ARM64 platforms (such as Allwinner A64/H5) have a boot process
where U-Boot encapsulates the BL31 part of the ARM trusted
firmware. For such platforms, we need to build ATF before U-Boot, and
pass a BL31 variable pointing to ATF bl31.bin to the U-Boot build
process.
This commit introduces a BR2_TARGET_UBOOT_NEEDS_ATF_BL31 variable to
achieve this.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- Rename option to BR2_TARGET_UBOOT_NEEDS_ATF_BL31
- Drop changes to arm-trusted-firmware.mk, they are taken care of by
previous commits.
- Improve Config.in help text
- Add missing dependency on arm-trusted-firmware when
BR2_TARGET_UBOOT_NEEDS_ATF_BL31 is enabled.
- Use bl31.bin from $(BINARIES_DIR) instead of taking it from ATF's
build dir.]
[Peter: depend on toplevel atf option and select bl31 option. Ensure it
cannot be enabled together with ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
as that would cause circular dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some platforms (e.g Allwinner ARM64) don't build a FIP image out of
ATF, but only a BL31 image, which is then encapsulated in U-Boot. This
commit adds an ATF option to build such an image.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ATF can be used in different ways:
- ATF encapsulates U-Boot as the BL33, which is what is done on ARM
Juno (currently supported in Buildroot) and Marvell platforms (soon
to be supported)
- U-Boot encapsulates ATF's BL31, which is what is done on Allwinner
ARM64 platforms.
Until now we were assumming the former was always the case, but
obviously it isn't. Therefore, this patch adds an option that allows
to explicitly tell ATF that it encapsulates U-Boot as its BL33.
We adapt the only defconfig that uses ATF so that it enables this
option as appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, our arm-trusted-firmware unconditionally builds a FIP
(Firmware Image Package). While this is often needed on platforms
where ATF encapsulates U-Boot, it is not the case on some other
platforms where it's U-Boot that encapsulates parts of ATF.
In order to prepare the support for the later platforms, we make
building the FIP image optional, and update the only defconfig we have
that uses ARM Trusted Firmware.
Note: we considered adding a "default y" here to preserve backward
compatibility, but there really isn't any default that is sane:
whether a FIP image needs to be built or not is purely platform
specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This board is quite similar to orangepi-one board. Instead of ethernet, it
has RTL8189FTV SDIO WiFi chip.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Jan Kraval <jan.kraval@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patches are no longer needed because they have been pushed back into
the upstream axfs repository.
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Refresh patch #6.
Drop patch #9, parallel build fixed in upstream commit 7dad1f268f12.
Renumber the next patch.
Add reference to upstream signature, and license hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The HDF5 package is used by flann for testing purpose only and is
not part of buildroot packages. However, if present in the host, it will
be used and trigger the unsafe header/library path used in
cross-compilation error.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openssl is a virtual package, that can be provided by either libressl
or libopenssl, so there's no need to check for libressl separately.
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 2.0.16 we now have uncompressed kernel size available
for ARM starting v4.14 and later kernels.
Let's also remove the extra space after the checksum while at it.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make WiFi work out of the box on orangepi-pc-plus:
- add rtl8xx firmware
- add rtl8189fs driver
- add mdev for module autoloading
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is a variant of orangepi-pc board. It adds 8GB eMMC and Realtek
RTL8189FTV SDIO WiFi chip. This variant has a separate support in U-Boot
and kernel. So it makes sense to create a separate entry
for this board in buildroot.
Board support package includes the following components:
- mainline u-boot 2017.09
- mainline kernel 4.13.11
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
[Thomas: add entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001-Makefile-remove-Werror-to-avoid-build-failures.patch is
adjusted to apply to the new version of kvm-unit-tests
- 0001-x86-hyperv_clock-be-explicit-about-mul-instruction-d.patch is
removed, as it has been merged upstream as of commit
45276b5860522921c77fb3ccc1458ff5f223c3c6.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building this defconfig
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_WESTON=y
BR2_PACKAGE_XORG7=y
is broken:
CC clients/weston_simple_dmabuf_drm-simple-dmabuf-drm.o
clients/simple-dmabuf-drm.c: In function 'create_display':
clients/simple-dmabuf-drm.c:758:15: warning: implicit declaration of function 'eglQueryString' [-Wimplicit-function-declaration]
extensions = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
^~~~~~~~~~~~~~
clients/simple-dmabuf-drm.c:758:30: error: 'EGL_NO_DISPLAY' undeclared (first use in this function)
extensions = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
^~~~~~~~~~~~~~
clients/simple-dmabuf-drm.c:758:30: note: each undeclared identifier is reported only once for each function it appears in
clients/simple-dmabuf-drm.c:758:46: error: 'EGL_EXTENSIONS' undeclared (first use in this function)
extensions = eglQueryString(EGL_NO_DISPLAY, EGL_EXTENSIONS);
^~~~~~~~~~~~~~
clients/simple-dmabuf-drm.c:759:21: warning: implicit declaration of function 'weston_check_egl_extension' [-Wimplicit-function-declaration]
if (extensions && !weston_check_egl_extension(extensions,
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just AUTORECONF = NO is redundant.
Just HOST_AUTORECONF = NO is redundant.
But the combination of AUTORECONF = YES + HOST_AUTORECONF = NO is valid.
So basically for all variables that have inheritance between target and
host, having the host variant of the variable set the variable value
back to its default is correct if the target variable is set.
Instead of increasing complexity of the script to fully detect this
case, ignore the host flag set to its default value as it can be
overriding a non-default value inherited from the equivalent target
flag.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all issues in hash files have been fixed, let's try to make
sure we don't introduce new ones by checking regularly the hash files
issues in Gitlab CI.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following check-package warning:
./package/freetype/freetype.hash:10: empty line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kodi-inputstream-adaptive is available on a limited list of archs:
https://github.com/peak3d/inputstream.adaptive/blob/Krypton/wvdecrypter/cdm/build/build_config.h#L97
Fixes build error
/home/buildroot/br8/output/build/kodi-inputstream-adaptive-9af21218a87572bd4ab8d8d660c11f6295144f97/wvdecrypter/cdm/media/cdm/../../base/../base/../build/build_config.h:137:2: error: #error Please add support for your architecture in build/build_config.h
#error Please add support for your architecture in build/build_config.h
for example with this defconfig:
BR2_powerpc64le=y
BR2_powerpc_power8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.net/toolchains/tarballs/br-powerpc64le-power8-glibc-2017.05-1078-g95b1dae.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_6=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_12=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_INPUTSTREAM_ADAPTIVE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_PY_ONLY=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
./package/armbian-firmware/armbian-firmware.mk:14: use only one space before backslash
./package/armbian-firmware/armbian-firmware.mk:15: use only one space before backslash
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes a typo introduced in commit
43e1d099b4 ("Revert
"package/qt5webkit-examples: remove obsolete package""), which caused
qt5declarative to not be added as a dependency for the correct
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since uboot 2017.09 path to dtc will be configured via Kconfig. As BR
skips this step for uboot-tools building one has to provide
CONFIG_MKIMAGE_DTC_PATH=dtc on the build command line. Otherwise
mkimage will not be able to create FIT images, i.e.:
mkimage -f kernel-fit.its kernel-fit.itb
will fail with very weird errors.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates omxplayer package to the latest commit on master as
of 2017-12-01.
Latest omxplayer version no longer have partial buildroot support and
Makefile.include file, but still contains some hardcoded include paths
that needs to be removed before building.
Signed-off-by: Julius Kriukas <julius@kriukas.lt>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The deleted patches are removed because they are now upstream as of
LTTng-UST v2.10.0.
Adding 0001-configure.ac-add-disable-examples-option-to-not-buil.patch
which will be part of a release eventually (in master branch as of this
date) to add the --disable-examples option. This option configures the
build so that examples are not built, so as to avoid build problems with
examples which involve CMake.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This merges the next branch accumulated during the 2017.11 release
cycle back into the master branch.
A few conflicts had to be resolved:
- In the DEVELOPERS file, because Fabrice Fontaine was added as a
developer for libupnp in master, and for libupnp18 in
next. Resolution is simple: add him for both.
- linux/Config.in, because we updated the 4.13.x release used by
default in master, while we moved to 4.14 in next. Resolution: use
4.14.
- package/libupnp/libupnp.hash: a hash for the license file was added
in master, while the package was bumped into next. Resolution: keep
the hash for the license file, and keep the hash for the newest
version of libupnp.
- package/linux-headers/Config.in.host: default version of the kernel
headers for 4.13 was bumped to the latest 4.13.x in master, but was
changed to 4.14 in next. Resolution: use 4.14.
- package/samba4/: samba was bumped to 4.6.11 in master for security
reasons, but was bumped to 4.7.3 in next. Resolution: keep 4.7.3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that they are in their own directory and no longer pollute the build
dir, there is no point in removing them.
Furthermore, a follow-up patch will require that those files survive
when more than one filesystem image is generated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove it just before generating the filesystem image.
This way, removing-and-recreating the file encloses the actual
image generation as tightly as possible.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The only users of post-target rules were ext2, cpio and initramfs.
Of those, ext2 and cpio were changed to use post-gen hooks, while
initramfs was not even using the generic rootfs infra and was fixed
to no longer reference post-target rules.
Besides, the comment in the infra was really misleading: it referenced
initramfs implying it was the sole user of that feature, even though
initramfs was not using the fs infra.
Furthermore, using post-target rules was inherently broken for top-level
parallel builds, because filesystems had to ensure the ordering by
themselves. Of the two real users of post-target rules (cpio and ext2),
one did enforce rules ordering (apparently correctly), while the other
forgot to do so.
We can get rid of post-target rules altogether, now.
Add a legacy check, to catch out-of-tree (e.g. br2-external) users of
post-target rules, and instruct them to switch to post-gen hooks instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We already have a mechanism for running stuff after the filesystem is
generated, and that's called post-gen hooks.
Use those hooks.
Note: for cpio (and unlike ext2 previously), the dependency chain was
correct, in that the post-target rule correctly depended on the image
rule. Nonetheless, we still want to fix it for consistency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
post-target rules are probably not resilient to parallel builds, given
that they do not depend on the image being generated first.
Beside, we already have a mechanism for running stuff after the
filesystem is generated, and that's called post-gen hooks.
Use those hooks.
Note: this basically reverts 75b6303 (rootfs-ext2: make the symlink as a
_POST_TARGET) since we've now re-introduced post-gen hooks.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rootfs-initramfs is not using the generic fs infrastructure, because
there is virtually nothing to do to build the initramfs image: there is
no actual image to be built to begin with.
The only purpose of rootfs-initramfs is to ensure the rootfs.cpio image
is built and then that the Linux kernel is rebuilt with that rootfs.cpio
as initramfs source.
Using variables of the fs infra like if it were used is misleading. It
looked nice as long as there was the possibility that rootfs-initramfs
would one day use the fs infra. But there's no way that will happen any
time soon.
Furthermore, the linux' rule linux-rebuild-with-initramfs now already
depends on rootfs-cpio by itself, so we need not duplicate this
dependency in rootfs-initramfs.
Still, we want to advertise that the dependency is on rootfs-cpio, so
we get nice dependency graphs (and not expose the internal
linux-rebuild-with-initramfs rule to the users).
So, remove the variables and directly define the rules.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the rule to rebuild the Linux kernel with an initramfs
directly depends on the path of the file of the intermediate cpio image.
This is inherently "bad" from a purity point of view; linux.mk should
not have to delve into the fs internals.
Rather, make it directly depend on the "frontal" rule that generates the
cpio image.
Drop the comment for linux-rebuild-with-initramfs, it was misleading
(talking about generating "the initramfs list of files", which is not
what was done, since we use a cpio as source of initramfs, not a list of
files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, enabling more than one filesystem image will make
'show-targets' list a few host packages more than once.
This is because all filesystem images add the same set of
host-packages to their dependencies, which are then added as-is
to the package list.
Thus, host-fakeroot, host-makedevs and, if needed, host-mkpasswd will
appear as many times as there are filesystem images enabled.
Fix that by sorting the package list, thus eliminating duplicates from
that list. Also sort the rootfs list for good measure. Sort the two
separately, so that rootfses are last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
- CVE-2017-8816: NTLM buffer overflow via integer overflow
- CVE-2017-8817: FTP wildcard out of bounds read
- CVE-2017-8818: SSL out of buffer access
For more details, see the changelog:
https://curl.haxx.se/changes.html#7_57_0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As of today quite a lot of ARC stuff got merged in upsream
such that we may finally use upstream realease for building
and even running Linux kernel and rootfs built with vanilla
binutils.
Essentially upstream release is still a bit behind our
GitHub-based releases but let's try to use vanilla version
and if we're lucky enough with just a small set of back-ported patches
we'll be able to use vanilla release(s) for everything in Buildroot.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Thomas: fixup the condition to select the special binutils site for ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc now has support for ARC, as of 7.x, with 7.2 being
usable, so let's allow its selection.
GCC from Synopsys GitHub still has a lot of fixes and improvements
most of which will be a part of the next upstream release but let's
see how it goes and if we see vanilla GCC doesn't require way too many
back-ported patches we'll be able to get rid of Synopsys GitHub here
at all.
As of today the only really required back-port is the one for non-uClibc
libc.
Back-ported from upstream master with help of:
-------------------->8--------------------
git format-patch 927c0132251f -1 -- . ':!gcc/ChangeLog' ':!libgcc/ChangeLog'
-------------------->8--------------------
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Spotted by check-package:
package/ndisc6/ndisc6.mk:14: possible typo: NDISC8_DEPENDENCIES -> *NDISC6*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OSTree is an upgrade system for Linux-based operating systems
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Thomas: use SPDX license code, fix license, it's GPL-2.0+ not GPL-2.0.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 940bfe2f43 with the
following changes:
- new hashes for 5.6.3 and 5.9.1 (there is no 5.9.2).
- BR2_PACKAGE_QT5BASE_LICENSE_APPROVED has been removed
- add GPL-3 to licences
- uses SPDX identifier for licences
- add missing dependencies (qt5base, qt5webkit, qt5declarative)
- removes /usr when qmake host-tools is invoked at configure
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Thomas: add entry in the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 4a5140ecf (toolchain/buildroot: glibc requires kernel headers >=
4.5 with NaN-2008) added a restriction on kernel headers for glibc when
the architecture is using naN-2008.
However, such a restriction is usually associated to a comment explaining
the restriction, so the user knows what is happening.
That comment was forgotten in 4a5140ecf. Add it now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rauc host tool (used to generate update bundles) runs mksquashfs so
host-squashfs is required for it to work at runtime.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The variable QT5_SNAPSHOTS_SITE was introduced in commit 9d5ac9698 to
fetch sources of obsolete modules. It was used to download qt5webkit
tarballs.
The variable is not referenced anymore since the qt5webkit tarballs are
downloaded from the Qt community release site.
Since the introduction of qt-5.9 in aa1c40ba3, the QT5_SITE variable
was duplicated for no good reason.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0002-arm-atomics-asm-with-new-binutils.patch is upstream as of
commit b261a24256792177a5f0531dbb25cc6267220ca5.
Patch 0003-Makefile-include-per-arch-Makefile-before-Makefile is
upstream as of commit 45ca5d3fcb6f874bf5ba55d0e9651cef68515395.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages (ex: skeleton-init-systemd) have a zero size so we cannot
divide by the package size. In that case make their percent zero
explicitly and avoid a ZeroDivisionError exception.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the Buildroot tree is read-only, then cache.txt is copied read-only into
the build directory, and the configuration step fails. Fix this in the
same way we do in other places, by opening permissions as we copy the file
using $(INSTALL).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sample quest and testing quest are not included in SOLARUS_LICENSE
since it's notinstalled by default.
Remove Werror when building with debugging symbols.
Add libpng runtime dependency since solarus games require png image
support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch.
Use the official archive and add a hash file.
Also add a license file hash.
Remove LGPL.txt license file since src/lzma directory has been removed
from the sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make WebKitGTK+ honor the value of CMAKE_BUILD_TYPE defined in the CMake
toolchain file by backporting the following upstream WebKit patch:
https://trac.webkit.org/changeset/225168
This reduces the generated binary sizes when building in "Release" mode
(BR2_ENABLE_DEBUG=n), for example when targeting ARMv8 the size reduction
is ~17 MiB.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libbsd is found by the configuration process, mtools unnecessarily
adds a NEEDED field with libbsd to its dynamic section, but it does not
actually use anything from libbsd under Linux. The same may happen to
host-mtools if some libbsd package is installed on the host machine.
Prevent this by forcing configure to bypass the checking for the
existence of a gethostbyname function in libbsd.
I stumbled on this problem when I built host-mtools and later removed
libbsd to upgrade to Fedora 27, due to Bug 1504831[1]. The previously
built host/bin/mtools started to fail due to the missing libbsd.so.0.
1. https://bugzilla.redhat.com/show_bug.cgi?id=1504831
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop libgcrypt dependency for SSL support; with newer version of gnutls
libgcrypt is not needed.
Drop the LIBS fix for static linking with gnutls that has been
introduced in commit 2d3d6d258b (libmicrohttpd: fix static linking with
gnutls). gnutls does not support static linking anymore.
Fix a comment typo.
Add license hash.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we do nothing about packages that touch the same file: given
a specific configuration, the result is reproducible (even though it
might not be what the user expected) because the build order is
guaranteed.
However, when we later introduce top-level parallel build, we will no
longer be able to guarantee a build order, by the mere way of it being
parallel. Reconciliating all those modified files will be impossible to
do automatically. The only way will be to refuse such situations.
As a preliminary step, introduce a helper script that detects files that
are being moified by two or more packages, and reports them and the
impacted packages, at the end of the build.
The list being reported at the end of the build will make it prominently
visible in autobuilder results, so we can assess the problem, if any.
Later on, calling that helper script can be done right after the package
installation step, to bail out early.
Thanks Arnout for the pythonist way to write default dictionaries! ;-)
Note: doing it in python rather than a shell script is impressively
faster: where the shell script takes ~1.2s on a minimalist build, the
python script only takes ~0.015s, that is about 80 times faster.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Peter Seiderer <ps.report@gmx.net>
[Thomas: rename script without .py extension.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we store the list of files installed in target/ and associate
each of them to the package that installed it.
However, we sometimes may need to know what package installed which file
in staging/, for example to debug header collision, or in host/, to
debug what package installed what host tool.
Enhance the step instrumentation to also generate the list for staging/
and host/.
We maintain backward compatibility, for external scripts that wanted to
parse the previously existing list, by not renaming the target-related
package list. Only the staging- and host-related lists are named after
staging and host.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix missing word in .mk comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To compute the list of files added by a package, we first store the list
of files before the install, do the install, list the files after the
install, and finally compare the two lists. The two lists are stored in
dot-files, hidden in the package's build dir.
We currently keep those two files, and only list the files installed in
target/
In followup patches, we'll also list files installed in staging/ as well
as files installed in host/.
Rather than add even more internal, hidden files in the package build
dir, we'll just re-use the same two temporary files to store the before
and after lists.
So, remove them after the comparison is done.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rygel is a home media solution (UPnP AV MediaServer) that allows you to
easily share audio, video and pictures to other devices.
Additionally, media player software may use Rygel to become a
MediaRenderer that may be controlled remotely by a UPnP or DLNA
Controller.
Rygel achieves interoperability with other devices in the market by
trying to conform to the very strict requirements of DLNA and by
converting media on-the-fly to formats that client devices can handle.
Most Rygel functionality is implemented through a plug-in mechanism.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- use SPDX license codes
- add hashes for license files
- move Config.in comment at the end of the Config.in file to not
break the indentation of the sub-options.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gupnp and gupnp-av defines two internal functions with the same name:
xml_util_get_element and xml_util_get_child_element_content, as a result
an application such as rygel can't be build statically.
To fix this issue, rename both functions as
xml_util_get_element2 and xml_util_get_child_element_content2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit e82fadab23 (gnupg2: bump to version 2.2.0) added a configure
option to keep the old 'gpg2' executable name to avoid conflict with the
gnupg package. It turns out that gnupg depends on !BR2_PACKAGE_GNUPG2
since commit 2cadb26e6d (gnupg: make gnupg and gnupg2 mutually
exclusive). Drop this configure option.
Rename the config option that controls the removal of gpgv2, now gpgv,
to match the new name. Add legacy config symbol handling.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build was broken in 5.6.2 and was disabled.
It compiles fine since 5.6.3.
The two additional patches are useful at run-time.
The first one avoid the need to specify the path to the SSL certificate
directory (using an additional environment variable).
The second one is the same used in 5.9.x (plus resolved conflicts). It uses the
process's context to get handles on EGL and GLESv2 libraries. Those libraries
are linked to Qt WebEngine at compile time.
The patch is particularly usefull for RPI boards since the raspberrypi userland
package does not provide the libEGLv2.so.2 and libGLES.so.1 symlinks. Both
library paths are hardcoded in Qt WebEngine.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building the target google-breakpad requires building the host variant
of google-breakpad. Just like the target google-breakpad only supports
a limited number of architectures, it is the same for the host
google-breakpad.
We therefore introduce a
BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS option that is used
where necessary to prevent the user from choosing Google Breakpad when
building on unsupported host platforms.
Fixes:
http://autobuild.buildroot.net/results/c7c04483508f9e4d629efa54571afeb1feaa5f73/
(build on a powerpc64le machine)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is invisible because the timings make it excessively difficult to
hit, but the Makefile is inherently flawed for parallel build, as it
contains:
$(objects): atsc_psip_section.c atsc_psip_section.h
atsc_psip_section.c atsc_psip_section.h:
perl section_generate.pl atsc_psip_section.pl
and the perl script section_generate.pl will create both the .c and .h
files in one go, but given the construct above, there can be two such
script that run in parallel, which can clobber the generated .c and/or
.h files.
So, make dvb-apps a MAKE1 package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add a hash for the license file.
- PostgreSQL 10.0 and above will default to checking for /dev/urandom if an
SSL library is not found, which will fail when cross compiling.
Since /dev/urandom is guaranteed to be provided on Linux systems,
add ac_cv_file__dev_urandom=yes to the configure environment if a SSL library
is not selected.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: minor tweaks to the /dev/urandom comment in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linphone can optionally use libupnp, so this dependency should be
accounted for in linphone.mk. In addition, linphone is not compatible
with libupnp18, but misdetects it as a a proper libupnp, causing a
build failure.
The build failure with libupnp18 currently only happens on the next
branch (because libupnp18 has only been added there), but adding the
optional dependency on libupnp makes sense for the master branch
anyway.
Fixes:
http://autobuild.buildroot.net/results/473c686f9bc5335d25b720cf1b0c45389138a7b4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to pdbg that fixes the build on the Blackfin
architecture. The build failure was due to the recently introduced
assembly code to embed the DTB into an object file. This code was not
taking into account the fact that Blackfin has a non-empty
__USER_LABEL_PREFIX__.
The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/2bf6f56303453fd2ba7e86882168d406ded4cc80/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of overriding the _svn command and injecting --non-interactive,
change the default value of BR2_SVN to include this flag so the end user
can choose not to use the flag.
This change helps users behind corporate system rules which may not
allow them to locally cache credentials and require interactive mode.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Originally implemented by]
CC: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, wayland support is enabled when the wayland package is
enabled, not when the FreeRDP wayland client is enabled.
But the dependency on libxkbcomon is only enforced from Config.in
when the FreeRDP wayland client is enabled., but is added to build
dependencies when the wayland package is enabled.
As such, we can end up in a situation where the FreeRDP wayland
client is disabled, the wayland package is enabled, and the
libxkbcommon package is also disabled, which casues the build to
fail with:
Makefile:539: *** libxkbcommon is in the dependency chain of
freerdp that has added it to its _DEPENDENCIES variable without
selecting it or depending on it from Config.in. Stop.
Change the build dependency to actually be on the FreeRDP client
being enabled.
Fixes;
http://autobuild.buildroot.net/results/dc3e11f7076a8355f3d2f9cb49c6325dcf7084bd
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Diffconfig is a simple utility for comparing two configuration files.
See usage in the script for more info.
Borrowed from the Linux kernel source code and adapted to Buildroot.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The armv8.1a generation is a cumulative extension to armv8a. It adds new
extensions, and makes some previously optional ones now mandatory.
Since gcc correctly enables the appropriate extensions based on the core
name, we don't really need to introduce a separate config for armv8.1a,
and we can piggyback on armv8a.
All those new cores are aarch64 only (gcc fails to build in arm mode).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some need gcc-5, some gcc-6 and some gcc-7.
The thunderx familly does not build in 32-bit mode (gcc complains
that the CPU is unknown, and even gcc master only knows them as
aarch64-only).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the logic for ordering the ARM cores in the choice is all
but obvious. ;-)
Reorder the choice by architecture generation, starting with armv4,
ending with armv8.
Add a comment before each generation, just for ease of use. Add a
separate comment for armv7a and armv7m.
Finally, order cores alphabetically inside the same generation (except
for armv7m cores, listed after all armv7a cores).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the possibility to choose the floating point mode (32, xx or
64) is conditional on having a sufficiently recent gcc version.
Which means that the architecture selection depends on the gcc version.
But that's opposite to what we've always done in Buildroot: the software
versions are conditional to the architecture options. There is nothing
we can do about the hardware: it is there, we can't change it, while we
can restrict ourselves to using software that is working on said
hardware.
Thus, we inverse the logic, to move the condition onto the software
side: whenever mfpxx is selected, we restrict the toolchain selection to
at least a gcc-5.
And now, the blind BR2_TOOLCHAIN_HAS_MFPXX_OPTION symbol is no longer
needed, so we get rid of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the possibility to choose the NaN encoding is conditional to
having a sufficiently recent gcc version.
Which means that the architecture selection depends on the gcc version.
But that's opposite to what we've always done in Buildroot: the software
versions are conditional to the architecture options. There is nothing
we can do about the hardware: it is there, we can't change it, while we
can restrict ourselves to using software that is working on said
hardware.
Thus, we inverse the logic, to move the condition onto the software
side: whenever NaN-2008 are selected, we restrict the toolchain
selection to at least a gcc-4.9.
But now, the option with the NaN type is always set, so we must enclose
the code in gcc.mk inside a HAS_NAN_OPTION condition, as is already done
for the external toolchain case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Take the conditions currently specified in the gcc version choice.
Also, the conditions explained in the commit log for 78c2a9f7 were not
all properly applied, especially the a57-a53 combo needs gcc-6, but
78c2a9f7 forgot to add the condition to gcc-4.9.
gcc-4.9 was excluded for cortex-a17 and a72, but the CodeSourcery
external toolchain, which uses 4.8, was not excluded for those two
cores. Now it is.
Remove the arch condition from gcc and the external toolchains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use the conditions currently expressed in the gcc version choice.
We leave the musl vs mips64 conditions in gcc, because the "fault"
really is on gcc, which does not recognise the mips64+musl tuples,
so the fix lies within gcc, and the current conditions are fitting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When an architecture expresses a requirement on the gcc version, limit
the version choice in the custom external toolchain.
The rationale being that there is no point in offering that version to
the user if we know before-hand that the gcc version will not work for
that architecture.
All versions below the minimum we support is just made conditional to
that minimum as well, including the "older" entry.
However, this means that the "older" entry is no longer available when
the architecture requires a minimum gcc version. A user who wants to use
a toolchain with a gcc older than the minimum will have no choice but to
realise the toolchain is not suitable (or lie and we would catch that
when checking the gcc version anyway).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Begin the conversion from hard-coded dependencies on architectures, to
architecture-specified version requirement, using the newly introduced
BR2_ARCH_NEEDS_GCC_AT_LEAST_XXX symbols.
Hard-coded dependencies will be removed progressively, as archs are
individually converted over to using the new symbols.
We do not change the architecture-specific versions for ARC and
OpenRISC, because there is no point in doing so for those, as they use
special, non-upstream versions anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some CPU variants require that a recent-enough gcc be selected. For
example, ARM's cortex-a35 requires gcc-5, while cortex-a73 requires
gcc-7. Same goes for other architectures, of course.
Currently, we hard-code every such conditions in the gcc version choice,
as well as in the individual external toolchains.
However, as we add even more CPU variants, the conditions are getting
more and more complex to write and maintain.
Introduce new symbols, that architectures can select if they have a
specific requirement on the gcc version. gcc and external toolchains
can then properly depend on those symbols.
The burden of maintaining the requirements on the gcc version now falls
down to the architeture, instead of being split up in gcc and all the
external toolchains.
As the oldest gcc version to handle, we can either choose gcc-4.9, as
the oldest version we support in our internal toolchain, or choose
gcc-4.8, as the oldest external toolchain we support (except for the
custom ones, but they'll be handled specifically in upcoming changes).
We choose to go back up to gcc-4.8.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of letting auto-detection do its job, be explicit about the
fact that we want the JFFS2 and UBIFS utilities when building the host
variant of mtd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The addition of a new defconfig in commit
459e3320dc ("configs/imx6sx-sdb: Add new
defconfig") introduced changes in the DEVELOPERS file and
.gitlab-ci.yml file that were not matching the defconfig name. This
commit fixes those issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Renamed --with-libpcre to --with-libpcre1. Currently --with-libpcre
activates pcre1 support but this can change in the future to pcre2:
df7fd961a9/configure.ac (L258)
Please note that we cannot use --with-/--without because it will lead
to an error reported by configure, for example
--with-libpcre1 --without-libpcre2
will produce
configure: error: Only supply one of --with-libpcre1 or --with-libpcre2!
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added new runtime dependency on python-six.
Dropped dbus-python as build time dependency (it's only runtime
dependency).
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to a simple bump, the following extra changes have occured:
- Change the refpolicy site to the official release URL.
- Remove REFPOLICY_SITE_METHOD and REFPOLICY_GIT_SUBMODULES as the contrib
submodule is included in the release tarball.
- Refpolicy is now compatible with python3, as such, remove host-python.
from the dependencies and add a check for python3 or python in it's place.
- Add upstreamed 0001-fix-regex-escape-sequence-error.patch to fix building
against python3.6.
- Add sha256 license hash to hash file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
parted uses libiconv but doesn't link with it. Add a patch to add it
to LIBADD of the library that uses it. iconv was already checked in
configure.ac, but only if i18n is enabled, so the iconv check is also
added unconditionally in configure.ac.
Also add an optional dependency on libiconv, so it is reproducible.
This was not detected in the autobuilders, since it only occurs when
libiconv exists (otherwise uClibc stubs will be used). libiconv
depends on !BR2_ENABLE_LOCALE and parted depends on BR2_USE_WCHAR. We
don't have such a configuration in the autobuilders.
Upstream status: sent to mailing list
http://lists.alioth.debian.org/pipermail/parted-devel/2017-November/005131.html
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Sjoerd Venema <srg.venema@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.8.2 added OAuth support so we need python-requests-oauthlib
as runtime dependency from now on. This package also has a runtime
dependency on python-requests so all we need is to update the select
command in Config.in.
Removed patch applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the BR2_TARGET_UBOOT_SPL_NAME option accepts a space-separated
list of binaries, the same option can be reuses for TPL binaries as
well. This commit updates the string and help text to indicate that
the same option can be used for SPL and TPL.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building waylandpp for the target requires a wayland-scanner++ binary
built for the host.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: use 'depends on BR2_PACKAGE_WAYLAND' instead of a select.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Branch 1.8.x of libupnp is not compatible with branch 1.6.x so add a
dedicated package and make it depends on !BR2_PACKAGE_LIBUPNP as
suggested by Thomas Petazzoni and Arnout Vandecappelle during review
of "libupnp: add 1.8.3 version" patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: fix the dependencies of the Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bundled tinysvcmdns library is affected by CVE-2017-12087 [1]:
> An exploitable heap overflow vulnerability exists in the tinysvcmdns library
> version 2016-07-18. A specially crafted packet can make the library overwrite
> an arbitrary amount of data on the heap with attacker controlled values. An
> attacker needs send a dns packet to trigger this vulnerability.
shairport-sync has incorparated upstreams fixes in [2].
[1] https://bugs.launchpad.net/bugs/cve/2017-12087
[2] 1dbdf94811
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fiber module uses the cpu_relax() macro, for which the MIPS
implementation uses the "pause" instruction, only available since
mips32r2 and mips64r2. In order to avoid build failures on
mips32/mips64, we disallow the selection of the fiber module for such
architecture variants.
This solution was suggested by Arnout Vandecappelle.
Fixes:
http://autobuild.buildroot.net/results/0439790b6f472e3d4b2d5431a05aa5b408f62e56/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenNTPD looks for a crypto library with tls_config_set_ca_mem, which
is available in LibreSSL but not OpenSSL. If tls_config_set_ca_mem is
found, crypto support is added to the build.
Because this is not currently checked, crypto support might not be
added due to the order of the build. Add a small check to see if
BR2_PACKAGE_LIBRESSL is selected, and if so, add a dependency for it.
Also add a note about this in the Config.in help section.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Remove upstream patch.
- Change locally computed hash to hash from the SHA256 URL.
- Add sha256sum for license file.
Note that we need to keep <pkg>_AUTORECONF = YES even though the patch
touching the Makefile.am has been removed, because our libtool patch
doesn't apply on the bundled ltmain.sh.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Prevent the installation from attempting to move shared libraries from
${usrlib_execdir} to ${libdir} if both paths are the same, which leads
to error messages like this:
mv: '$(TARGET_DIR)/usr/lib/libfoo.so.1' and '$(TARGET_DIR)/lib/libfoo.so.1' are the same file
That error is not fatal but let's avoid possible future problems.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes since v2:
- remove newlines from Config.in
- add LICENSE hash
Changes since v1:
- reword commit to match upstream style
- fold the DEVELOPERS modifications into the same commit
- add Config selections for required python core modules
- bump version to 6.3.0
Tested in a clean chroot, events are generated for exceptions, and
reported to the server configured for the client.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, remove upstreamed patches and add a hash for the license
file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Thomas: indicate pgp signature file address in hash file, as
suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version has a new command line argument to sgdisk, -j, that lets one
change the starting address of where the GPT partition table entries are
stored.
The iMX SoC ROM loader, and perhaps others, expects the bootloader to start
at sector 2. Using this option with gptfdisk lets the table entries move
to make space for the bootloader image.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 3861ce09d0.
As reported on IRC, runc v1.0.0-rc4 is not compatible with the docker-engine
version we are using, so lets revert for 2017.11:
20:27 < eschu> It looks like 25 days ago buildroot had runc updated to
1.0.0-rc4, which breaks compatibility with the docker-engine
version 17.05. Is there somewhere issues like this are
reported? Or is it just expected on non-release versions of
buildroot?
20:47 < Jacmet> eschu: ahh, so the new runc doesn't work with the old
docker-engine? what kind of errors do you get exactly?
20:49 < eschu> Jacmet: yes, runc made a change from -console to
--console-socket, which results in "Incorrect Usage" error
"flag provided but not defined: -console"
20:51 < eschu> Jacmet: basically docker-engine 17.05 uses -console, but
support for that was cut off in runc around the first 1.0.0
versions. I'll check the patches out, or might just
downgrade to buildroot 2017.08 release
20:51 < agb> Jacmet: unfortunately this issue has hit a number of distributions
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877146
20:53 < Jacmet> agb: thanks. I'll send a revert for 2017.11 and hopefully
we can make progress on the other docker packages for
2018.02
Cc: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch to fix examples compile without OpenGL support, in
the Qt 5.9 version of qt5declarative.
Fixes [1]:
In file included from fbitem.h:49:0,
from mainwindow.cpp:42:
logo.h:52:11: error: 'GLfloat' does not name a type
const GLfloat *constData() const { return m_data.constData(); }
^
logo.h:57:15: error: 'GLfloat' has not been declared
void quad(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2, GLfloat x3, GLfloat y3, GLfloat x4, GLfloat y4);
^
[...]
Makefile:610: recipe for target '.obj/mainwindow.o' failed
make[5]: *** [.obj/mainwindow.o] Error 1
make[5]: Leaving directory '.../build/qt5declarative-5.9.2/examples/quick/quickwidgets/qquickviewcomparison'
Makefile:70: recipe for target 'sub-qquickviewcomparison-make_first' failed
make[4]: *** [sub-qquickviewcomparison-make_first] Error 2
make[4]: *** Waiting for unfinished jobs....
[1] http://autobuild.buildroot.net/results/cef4abbe043f3aaad03c73e07cfab9d24c3d0fc9
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove 0001-configure.ac-use-given-CFLAGS-LIBS-for-mysqlclient-l.patch,
it does not have been sent upstream but issue has been fixed by
3b7164f7f9 (diff-67e997bcfdac55191033d57a16d1408a)
- 0002-Rename-base64_encode.patch has been integrated into this version
- --without-jpeg-turbo has been deleted from configure.ac
- libsdl dependency has been removed
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This updates the LEGO MINDSTORMS EV3 board to Linux kernel 4.14 and
U-Boot 2017.11.
* Kernel patches are dropped because they are in mainline now.
* This caused the kernel image to be >3M so some adjustments to the image
sizes/layout needed to be made in U-Boot.
* Updated U-Boot version bumped since we are touching this config anyway
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch 'Don't include <xlocale.h>'.
Fixes Bug-10501 ([1]):
In file included from ./include/locale.h:1:0,
from /usr/include/libintl.h:103,
from ./include/libintl.h:2,
from glibc/locale/programs/charmap.c:25:
glibc/locale/locale.h:146:11: fatal error: xlocale.h: No such file or directory
# include <xlocale.h>
[1] https://bugs.busybox.net/show_bug.cgi?id=10501
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
- CVE-2017-14746:
All versions of Samba from 4.0.0 onwards are vulnerable to a use after
free vulnerability, where a malicious SMB1 request can be used to
control the contents of heap memory via a deallocated heap pointer. It
is possible this may be used to compromise the SMB server.
- CVE-2017-15275:
All versions of Samba from 3.6.0 onwards are vulnerable to a heap
memory information leak, where server allocated heap memory may be
returned to the client without being cleared.
There is no known vulnerability associated with this error, but
uncleared heap memory may contain previously used data that may help
an attacker compromise the server via other methods. Uncleared heap
memory may potentially contain password hashes or other high-value
data.
For more details, see the release notes:
https://www.samba.org/samba/history/samba-4.6.11.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since binutils commit 1a9ccd70f9a7 ("Fix the linker so that it will not
silently generate ELF binaries with invalid program headers. Fix readelf
to report such invalid binaries.") the behaviour has changed and
binutils tries to create a program header segment for which there is no
space. Thanks to Nicholas Piggin and his patch to Linux:
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=ff45000fcb56b5b0f
Cedric fixed this in kvm-unit-tests commit 95062c20790d ("powerpc: add
-n to LDFLAGS") so bump to that version.
Since the patch 0001-remove-werror.patch needs to be adjusted, we take
this opportunity to reformat is as a Git patch.
Fixes:
http://autobuild.buildroot.net/results/80825b492abf61313637b109d6a0944b38d5f739
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas: add necessary hash change, refresh patch that was not
applying anymore.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
boot.cmd using dts file instead of dtb which was
added in below commit, so fix the same.
"board: Add Bananapi M1 support"
(sha1: 5f50fb8d1d)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes the following build issue of libfastjson with old
enough compilers (4.8) and wchar disabled:
json_object.c: In function 'fjson_object_object_delete':
json_object.c:385:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0 ; i < FJSON_OBJECT_CHLD_PG_SIZE ; ++i) {
^
The code of libfastjson requires C99. If your compiler is recent
enough (gcc 5.x), then no problem, it is C99 by default, no additional
flags are needed.
If your compiler is older (for example gcc 4.8), then -std=c99 or
-std=gnu99 is explicitly needed to tell the compiler to accept C99
constructs. Testing the compiler for the availability of such flags is
done by libfastjson configure script. However, the test program used
by the configure script uses some wchar_t types, and therefore the
test checking for C99 availability fails on toolchains with wchar
disabled. From config.log:
configure:3928: checking for /home/test/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc option to accept ISO C99
[...]
configure:4077: /home/test/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc -std=gnu99 -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
conftest.c:54:3: error: unknown type name 'wchar_t'
const wchar_t *name;
^
So, just like we did in libv4l in commit
f01396a158 ("libv4l: fix uclibc-ng
configure/compile"), let's hint directly the configure script that it
should use -std=gnu99. This fixes the build of libfastjson with old
compilers and wchar disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is needed to get the autobuilders to use a toolchain that
includes the fix merged in 9d544feb8a
("fwup: fix for ARC toolchain").
In addition, this new toolchain version also fixes for real the RPATH
issue that should have been fixed by
f90f28a6df, but wasn't done properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 06a4975d4b (qt5: bump LTS version to 5.6.3) added an empty hash
for the 5.6.3 variant of qt5webkit, causing failures.
It also forgot to adjust the download URL as the qt5webkit tarballs are no
longer available under official_releases/ like the other submodules, but only
under community_releases/.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, ssl support is implicitely disabled in the initial configure
options. This overrides the check for openssl below.
libpjsip is also currently only compatible with libopenssl. Change
the check to LIBOPENSSL instead of openssl, and depend on libopenssl.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
disable-small-filter and disable-large-filter have been deprecated as
of 2.7, causing messages during compile time complaining about how they
are deprecated and have no effect.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove uClibc build fix; current uClibc version defines the required
macro.
Remove static link fix; fixed upstream.
Rebase the musl libc-compat.h workaround to adapt to upstream headers
location change.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pengutronix is now hosting the official genimage repository and release
tarballs on Github. This patch updates the official URL from the package
description and its download website described in GENIMAGE_SITE.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Contains a number of important fixes. From the relase notes:
https://lists.zx2c4.com/pipermail/wireguard/2017-November/001935.html
* netlink: plug memory leak
* qemu: check for memory leaks
There was a small memory leak on the netlink configuration layer that's now
been fixed.
* netlink: make sure we reserve space for NLMSG_DONE
A rather important change - due to an upstream kernel bug, that's existed
since the advent of netlink itself, sometimes wg(8) failed to receive valid
data back from kernelspace, resulting in "ENOBUFS" when trying to dump all
peers. This patch works around it while we wait for upstream to commit the
fix.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we do a full git clone of the repository, which takes quite
some time, especially on slow networks.
This was done like that because the initial patch was using the official
repository as the source of the download, and that repository did not
offer remotely-generated tarballs.
But now we've switched to using a mirror on github, which does provide
such a tarball, which provides faster downloads.
Use that.
However, the tarball from github differs from the one we were generating
locally, because the paths inside are different. WE used to create a
archive with paths starting with glibc-glibc-2.26-73-g4b692dfb95[...],
while github does away with the git-describe prefix, and generates paths
that start with just glibc-4b692dffb95[...]. The content are exactly
identicall (checked with a diff), though.
Update the hash accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 1e5a8916b2.
The idea was that the version string can be derived because we know the
package name.
However, this patch does not account for the fact that $(pkgname) always
points to the latest pacakge scanned, which in all other situation we're
using it, is the current package, because it is used inside one ot he
xxx-inner macros that are $(eval)ualed. So $(pkgname) is evaluated
"early" and gets the expected value.
However, the github value is not in one of those macros, so it gets
evaluated "late", when doing the actual download. So, by that time,
$(pkgname) will expand to the last package scanned, which is actuall the
manual (without a br2-external tree).
That would require that the _SITE variable be assigned with the :=
assignment operator. This is weird, because that would make it the only
variable to require that, but only when using the github helper, which
is even less obvious and would cause a lot of trouble...
The obvious fixup would seem to be to use $(PKG) instead, because that
already contains the upper-case package name that vcan be used as a
prefix to variables.
However, that does not work either, because we have a check that forbids
a trsailing slash in _SITE, check that is done in pacakge/pkg-generic,
inside the xxx-inner macro, during the $(eval) call.
And at that time, PKG is not yet defined, because it is only defined for
an actual recipe.
So we can't seem to have a workable solution. So, just revert the patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Latest commit is from Oct 5, 2017. This adds support for the i.MX7
family.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, FreeRDP uses pkg-config to find whether wayland is available.
When it is, it gets the CFLAGS and LDFLAGS and so on from pkg-config,
which is OK.
But I also gets the path to the wayland scanner from pkg-config. And
this points to the target one, when we really need the host one.
So we force-feed the correct path as a configure option.
Furthermore, wayland support needs libxkbcommon, so add this missing
dependency as well.
Fixes:
http://autobuild.buildroot.org/results/bdfe233ade36a56d0f65ef3c3d1698fca548beed/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only depend on host-pkgconf for gstreamer-0.x
However, we also need it at least for gstreamer-1.x and waylabnd, too.
But since FreeRDP is a cmake package, host-pkgconf is always pulled in
as a dependency by the cmake-package infrastructure.
So, drop the gstreamer-conditional host-pkgconf dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed the following security issues:
CVE-2017-0898: Buffer underrun vulnerability in Kernel.sprintf
CVE-2017-10784: Escape sequence injection vulnerability in the Basic
authentication of WEBrick
CVE-2017-14033: Buffer underrun vulnerability in OpenSSL ASN1 decode
CVE-2017-14064: Heap exposure in generating JSON
For more details, see the release notes:
https://www.ruby-lang.org/en/news/2017/09/14/ruby-2-4-2-released/
Drop now upstreamed rubygems patches and add hashes for the license files
while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING is enabeld,
wpa_supplicant currently fails to build with:
../src/common/sae.o: In function `sae_cn_confirm.isra.2':
sae.c:(.text+0x168): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x198): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ffc':
sae.c:(.text+0x214): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x22c): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ecc':
sae.c:(.text+0x2a4): undefined reference to `crypto_ec_point_to_bin'
sae.c:(.text+0x2c0): undefined reference to `crypto_ec_point_to_bin'
[...]
This is due to the fact that the SAE code, used for the mesh network
support, needs OpenSSL support. Therefore, we ensure that
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING selects OpenSSL. Only
OpenSSL is supported, which is why
BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected as well.
No changes to the .mk files are needed, because we were already
handling OpenSSL as an optional dependency.
This problem was not yet caught by the autobuilders.
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As usual, https://github.com/kergoth/tslib/releases has the changelog
summary.
This release includes a new plugin "lowpass" that is being built by
default; so we add that to the list of statically compiled in plugins
for static builds.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
==== version 0.13.0 (2017-11-01) ====
* New imxv4l2videosink element
Currently only supports input physically contiguous memory blocks
as input (so, for example, no videotestsrc)
* New Pango-based overlay elements using G2D for rendering
* gstimxcommon library is now public
Necessary when implementing external sinks to retrieve the mapped
physical memory address from gstreamer buffers
(NOTE: ABI may change in the next few releases until this is stabilized)
* New optional ability to use GstPhysMemory from gst-plugins-bad
* imxv4l2videosrc:
* Fix compile prior to Gstreamer 1.3.1
* v4l2_buffer_pool: Add special case for tw6869 driver
The tw6869 driver requires a different physical address to allow
DMA'able buffers for decreasing latency between chip and display
* v4l2src: add fractional "fps" property
(obsoletes the "fps-n" property)
* Add GstImxV4l2Meta init function
This avoids the g_assert() that was caused by the missing init
function
* Add num-additional-buffers property
This can be useful if capturing video isn't smooth; it sets the
number of internal additional buffers, so if downstream consumes
too many buffers, imxv4l2videosrc might end up doing a blocking
wait until buffers are returned
* imxv4l2src plugin is now called imxv4l2video, because it also
contains imxv4l2videosink
Also, the v4l2 elements can be enabled/disabled in the build
configuration individually now
* compositor:
* Only copy compositor input buffers to DMA memory once
If a single input frame is used for multiple output frames, we would
otherwise copy multiple times which can easily go to the limit of the
memory bandwidth
* vpu:
* Handle releasing of buffers without assigned framebuffer
This can happen if the buffer is released before it was actually
used, e.g. when renegotiating at the very beginning; prevents
a crash that would otherwise occur
* Add parameter check to avoid encoder crash on flush
* g2d:
* Add build configuration switches to explicitely specify G2D include
and library paths
* Disable cacheable memory allocation
Several issues were reported with cacheable DMA memory, so it is
turned off, at least for now
* blitter:
* Add property to clear screen to black in blitter sinks
* Add output-rotation property to videotransform base class
* audio:
* Fix reference counting for caps
* Mark static codec caps as may be leaked
This gets rid of the false positive in the leak tracer
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package includes some target-specific code that is irrelevant
in a host package but gets built anyway. The target for this code
must be one of the supported ChromeOS targets.
Supplied Makefile apparently relies on the environment to provide
a valid target, with a simple fallback to host arch. This breaks
the build if no value is provided and the host arch is not among
the supported ones.
Should fix
http://autobuild.buildroot.net/results/d118a83b6c4f7f910d0d44c279f36251d7ba29e8/
and similar failures.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All Buildroot pre-built toolchains have been rebuilt with Buildroot
2017.11-rc1, so that they have the latest version of
glibc/musl/uClibc, and also the latest gcc/binutils updates.
Specifically, this will fix the build failures on Blackfin that were
due to the missing accept4() support:
http://autobuild.buildroot.net/results/8b5a72dd7cde685f6f68f46aeee8b1b60c96d559/
(openobex)
http://autobuild.buildroot.net/results/b19dd9ed29944d7f79c6f824669e3baaa0bb045a/
(libiio)
In terms of changes to the toolchains:
- AArch64 glibc toolchain changed to use 4.4 kernel headers instead
of 4.1, in order to increase the variety of kernel header versions
being tested.
- Most configurations now use 4.13 kernel headers instead of 4.12
(except the configurations that were explicitly using an older
kernel headers version)
- The mips64 n64 configuration is changed from using gcc 4.9 to gcc
5, since another ARM configuration already tests gcc 4.9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the changelong:
Set the FD_CLOEXEC flag on sockets, so they are not "leaked" to
spawned processes
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-12172: Start scripts permit database administrator to modify
root-owned files.
CVE-2017-15098: Memory disclosure in JSON functions.
CVE-2017-15099: INSERT ... ON CONFLICT DO UPDATE fails to enforce SELECT
privileges.
See the announcement for more details:
https://www.postgresql.org/about/news/1801/
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains a minor rendering fix, another for the WebDriver
implementation, and security fixes for CVE-2017-13798, CVE-2017-13788,
and CVE-2017-13803.
Release notes:
https://webkitgtk.org/2017/11/10/webkitgtk2.18.3-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go-bootstrap is a host package that builds a first stage Go compiler,
later used to build the final Go compiler. However, this first stage
compiler only supports building on x86, x86-64 and arm as host
architectures, so we need to add the relevant architecture
dependencies to avoid having go-bootstrap built on other unsupported
platforms.
We do this by introducing BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS
in a new package/go-bootstrap/Config.in.host file. This option is then
used by BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS to make sure we can't enable
Go packages when the host architecture doesn't allow building the Go
compiler.
Fixes:
http://autobuild.buildroot.net/results/cbd419c6ab6fa8a6d18dc137c91f895867e53b8a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make WiFi work out of the box on orange-pi-zero:
- add xr819 firmware to image
- add mdev for module autoloading
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package enables access to firmware blobs from Armbian firmware
repository: https://github.com/armbian/firmware
That repository contains multiple firmware blobs grouped by vendor.
For the sake of convenience each group can be independently selected
using Kconfig options. This commit enables the following options:
- firmware blobs for XR819 SDIO WiFi chip
- firmware blobs for AP6212 WiFi/BT combo
Armbian firmware repository does not include any specific licenses.
Most part of those firmware blobs belongs to various Android/Linux
SDK packages provided by board vendors. As a result, this package
makes use of the following conservative approach for all the
selected firmware binaries:
FIRMWARE_LICENSE = PROPRIETARY
FIRMWARE_REDISTRIBUTE = NO
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prosody configure script defines CFLAGS as -fPIC -Wall, but
because we pass our own CFLAGS, the -fPIC goes away, causing a build
failure when building shared libraries on x86-64:
/home/test/autobuild/run/instance-0/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-amd-linux-gnu/6.2.0/../../../../x86_64-amd-linux-gnu/bin/ld: encodings.o: relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC
So let's pass this -fPIC flag explicitly in CFLAGS. We don't bother
passing it conditionally !BR2_STATIC_LIBS because other packages (e.g
lua) also pass -fPIC unconditionally.
Fixes:
http://autobuild.buildroot.net/results/7f0eb285b75cdeacb21a1f9a9f64d2f0cbbf1d59/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent crypto handling change (commit 04a1031d3: package/libssh2: Add
selectable crypto libraries) had the unfortunate side effect that it no
longer automatically selects the most suitable crypto backend (E.G. one
where the dependency is already enabled), so all users not wanting to use
the mbedtls backend need to explicitly configure this.
Fix this by inverting the logic so the crypto backend sub options use
'depends on' their dependencies instead of 'select', so only the available
backends are displayed.
Like before, default to openssl if no crypto backend dependencies are
currently enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc doesn't implement __register_atfork() on noMMU systems, causing
a build failure of libressl. Since openssl is available as an
alternative on such platforms, we just disable libressl on
uClibc/noMMU systems.
Fixes:
/home/thomas/projets/buildroot/output/build/libressl-2.5.5/crypto/.libs/libcrypto.a(arc4random.o): In function `_rs_init.part.1':
arc4random.c:(.text+0x74): undefined reference to `__register_atfork'
collect2: error: ld returned 1 exit status
This build issue is not visible in the autobuilders, because libressl
is only selectable through a choice, which isn't randomized by the
autobuilder logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to 4.13.11 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ethtool has a configure script option allowing the enabling or disabling of
pretty printing for drivers, SFP modules etc which can save a significant
amount of bytes on the root filesystem. Allow selecting that, and turn it on by
default (like ethtool's configure script).
[Peter: fix Config.in indentation/style]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/49d/49dcec0bd2f3bb78c18675a9fa5c9c53cc183fd2/
g_cclosure_marshal_VOID__VOID is defined both in libgobject.a and
libgstreamer.a. It is probably possible to fix this, but gstreamer0.10
has been deprecated for a long time now and is anyway unlikely to be
used in static-only situations, so let's just require dynamic linking.
Propagate to the reverse dependencies. opencv3 already did depend on
dynamic libs.
[Peter: add autobuild reference]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We use the host compiler for x86-64 builds, so ensure it is only available
on x86-64 hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update kernel to 4.13 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/106/106af20196089e74c35daabdae46f030981600bd/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Passing extra jimtcl configure flags is unfortunately not forseen in the
usb_modeswitch Makefile, so add a small patch making this possible.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d13/d137680bf1c0ebfacef635cb2f0fc14524759143/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://github.com/libimobiledevice/libplist/blob/master/NEWS
This version bump fixes
* CVE-2017-6440
* CVE-2017-6439
* CVE-2017-6438
* CVE-2017-6437
* CVE-2017-6436
* CVE-2017-6435
* CVE-2017-5836
* CVE-2017-5835
* CVE-2017-5834
* CVE-2017-5545
* CVE-2017-5209
... and several others that didn't receive any CVE (yet).
The dependency to libxml2 was removed.
Autoreconf is not needed anymore, the upstream tarball includes a
configure script.
[Peter: also drop host-pkgconf dependency, only used for cython]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove --enable-abstract-sockets; dropped upstream. Remove
ac_cv_have_abstract_sockets that is dropped as well.
Remove --disable-selinux; we handle selinux as an optional dependency
below.
Remove --{enable,disable}-dnotify; this options has been removed in
version 1.7.6, broken since 2010.
Remove --with-init-scripts; dropped upstream.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel module git revision to make it work with Linux v4.13.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When multiple hooks are registred, both pre-a and post-command hooks'
foreach loops need to have a separator at the end in order for the
code to work as intended. Without the separator all hooks end up as a
one single line command thus making all but the first hook into
no-ops.
Fixes: 4628b6f3b4 ("fs: add pre- and post-command hooks")
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -m32 compiler flag is used for 32bit builds and the host tools have
limited architecture support. It may work in some situations (e.g.
on aarch64 host when building a 64-bit target), but it's equally likely
that it breaks and those situations are not tested. So just limit to
x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: explain that it may work in some situations]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -m32 compiler flag is used for 32bit builds and host-luajit has
limited architecture support. Building for a 32-bit target on a 32-bit
host should always work, but we haven't tested that and it's very
unlikely that someone needs it. So just limit to x86(-64) hosts.
Fixes:
http://autobuild.buildroot.net/results/5f5b5edb058efe976c003678e21bcc28a87cc828/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: clarify that it might work on 32-bit hosts for a 32-bit target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ti-gfx is provided as a x86 self extracting executable, so it is only
available on x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since version 3.0.0 protobuf is compatible with Python3, remove
Python2-only dependency.
It depends on python-six now, add this missing dependency.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When prefix is set to a path like /usr during crossbuild
the sed operations end up executing twice, once for the prefix
reassignment and another for includedir if it is set as a string
including the ${prefix} variable. This results in an issue
when the build directory is under /usr.
This patch updates the remaining location which uses the prefix
variable to also sed and update to use the real path.
Upstream bug report:
https://bugs.python.org/issue31713
Buildroot bug:
https://bugs.busybox.net/show_bug.cgi?id=10361
Fixes failures like the following:
dbus-python-1.2.4 | NOK | http://autobuild.buildroot.net/results/758858efa97b6273c1b470513f5492258a6d8853
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: refer to autobuild failures that still exist]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the selection of the backend is based on a priority order,
which is not always desirable: not all features are available for all
backends, as reported upstream:
https://github.com/libssh2/libssh2/issues/213
In that particular case, the problem is that libgcrypt is unable to
read encrypted certificates created with openssl, but it is likely
that other incompatibilities exist as well.
As such, allow a user to select the backend most appropriate to their
use-case.
Note that this changes the defaults: previously, if openssl was already
selected and we additionally select libssh2, openssl would be used as
a backend. Now, mbedtls is the default so if the user doesn't change
it, mbedtls will be used.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: remove now-unneeded comment in .mk file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-luajit has limited architecture support, and moarvm does not need
anything luajit specific - So use host-lua instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono to version 5.4.0.201 and monolite
to version 1050400003.
It also removes a patch not needed anymore.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add systemd start-up configuration for dhcpcd that is executed after
the network has been brought up.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many Buildroot users can not read Dutch. Although there is an English
version of this page, the github page looks more suitable as a link for
the software package itself, and the readme.md file is pretty
informative.
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 49a9fb0f13 removed the
BR2_PACKAGE_OPENOBEX_BLUEZ option, because BlueZ support is now
unconditionally included in OpenOBEX. Therefore, selecting this legacy
option no longer makes sense, and in fact triggers the legacy handling
for no reason.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Back in commit a662ff7e79
("package/argp-standalone: Fix build with c99 compilers"), we fixed
the build of argp-standalone with compilers defaulting to C99 inline
semantics, i.e starting from gcc 5.x.
This was done as part of a patch that used "inline" instead of "extern
inline". However, using "inline" once again broke the build with gcc
7.x. To fix this, revert back to using just "extern inline" (hence
removing a patch of patch 0003-fix_build_with_c99_compilers.patch) and
instead use -fgnu89-inline in the CFLAGS.
See https://gcc.gnu.org/gcc-5/porting_to.html for more details.
Fixes:
http://autobuild.buildroot.net/results/a9cedc54829b7bd2dd7ae6ff2bd6c6db242f1c35/
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: also drop the patch of
0003-fix_build_with_c99_compilers.patch that is no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update libssh2 to use the newest version from git. This caused a
transition from released version number to hash as it has not been
version rev'd in over a year (see issue
https://github.com/libssh2/libssh2/issues/220 for bump request).
This brings in changes to the autoconf to correctly pick the crypto
library.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the advisory:
http://www.openwall.com/lists/oss-security/2017/10/30/4
It was discovered that the bgpd daemon in the Quagga routing suite does
not properly calculate the length of multi-segment AS_PATH UPDATE
messages, causing bgpd to drop a session and potentially resulting in
loss of network connectivity.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix CVE-2016-2779: runuser in util-linux allows local users to escape to
the parent session via a crafted TIOCSTI ioctl call, which pushes
characters to the terminal's input buffer.
The new experimental "su --pty" feature has been implemented to fix this
issue. The feature is not enabled by default and the new command line
option --pty is necessary.
Add rfkill, a command for enabling and disabling wireless devices. This
implementation is based upon, and backward compatible with, the original
rfkill from Johannes Berg and Marcel Holtmann, currently provided by the
standalone "rfkill" package.
Add uuidparse, a command to analyze and print information about UUID's.
The "reset" script is not part of utill-linux anymore. Add a legacy
config telling the user to use either BusyBox or the ncurses program.
Drop the ncursesw patch, allready applied upstream. AUTORECONF is not
required anymore.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug fix release:
- correctly handle signal interrupts when polling in gpiod_simple_event_loop()
- fix the linking order when building with static libraries
- pass the correct consumer string to gpiod_simple_get_value_multiple() in
gpioget
- fix a line test case: don't use open-drain or open-source flags for input
mode
- fix the flags passed to ar in order to supress a build warning
- set the last error code in gpiod_chip_open_by_label() to ENOENT if a chip
can't be found
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
swupdate 2017.07 has a bug which makes hash verification faulty.
The commit adds a patch to fix the issue. The fix has already been
pushed to upstream and is a copy of the commit
dba95dcd3739c604a81ffa2df2545e7a4cd430cf in the swupdate repo [1].
[1] https://github.com/sbabic/swupdate
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of the cryptodev-linux version used in Buildroot is currently
broken for kernels >= 4.13. A fix was pushed upstream:
f0d69774af
This patch bumps the cryptodev-linux package version to use the latest
available one, which includes the commit fixing the build for recent
kernels.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The basic lvm2 package (libdevmapper / dmsetup) does build under musl, only the
standard (full) installation doesn't.
Many setups only need the basic package, so move the !musl dependencies down
to the sub options and adjust the reverse dependencies (cryptsetup/dmraid)
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: adjust Config.in comments and dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds 5_6_3 to the Timeline patch that fixed the build with
Qt 5.6.2.
Signed-off-by: Scott Ellis <scott@jumpnowtek.com>
[Thomas: adjust patch existing patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Open-source software for volunteer computing and grid computing.
Use the idle time on your computer to cure diseases, study global
warming, discover pulsars, and do many other types of scientific
research.
https://boinc.berkeley.edu
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Bernd:
- bumped to version 7.8.3
- removed patches which where applied upstream
- added myself to DEVELOPERS as well]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream socat2 branch seems to be dead. Last commit is from January
2016 . Over the last few years socat2 received only fixes cherry picked
from the master 1.x branch. Most major general purpose distros only
package socat 1.x.
Drop the threads dependency; not needed for 1.x.
Mention the OpenSSL exception in the license. Add hashes for license
files.
Correct the autoconf comment. The tarball configure script is recent
enough. But since we patch configure.in and Makefile.in we still need to
autoconf.
All patches we carry for socat2 are also needed for socat 1.x.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc upstream has ruled against doing regular point-releases, but they
do have a lot of interesting and important fixes for regressions and
security.
Backporting each patch, or cherry-picking individual patches is off
limits for us, so we just switch to using the currently-latest HEAD of
the maintenance branch instead.
The version number is obtained with:
$ git describe --match 'glibc-*' --abbrev=40 origin/release/2.26/master
The alternative options were:
- download the tarball from the git tree
--> does not work; not an option
- download the 2.26 tarball, and bundle the individual patches in
Buildroot
--> maintenance of patches is a burden; not an option
- download the 2.26 tarball, maintain the list of patches to download from
the git tree
--> not an option for the same reason
So we end up just doing a git clone. The git tree is today about ten
times the size of the tarball, so a rough estimate makes it at about ten
times the download time.
Also upstream doesn't officially provide an https download location [1].
There is one but it's not reliable, sometimes the connection time out and
end-up with a corrupted git repo:
fatal: unable to access 'https://sourceware.org/git/glibc.git/': Failed to connect to sourceware.org port 443: Connection timed out
So switch to using a git mirror from github which is updated once a day [2].
This allow at the same time to clone the git repository faster.
Note: The glibc 2.26 patches are not kept for the arc toolchain since they
are fixing an issue with the new float128 support introduced in x86, x86_64
and powerpc64le.
[1] https://sourceware.org/git/?p=glibc.git;a=summary
[2] https://github.com/bminor/glibc.git
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
[Romain: bump 4b692dffb95ac4812b161eb6a16113d7e824982e]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: update comment to never decide on the mirror]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reorganize so the optional composer option for the qt5wayland package shows up
as an indented option.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-13089: The http.c:skip_short_body() function is called in some
circumstances, such as when processing redirects. When the response is sent
chunked, the chunk parser uses strtol() to read each chunk's length, but
doesn't check that the chunk length is a non-negative number. The code then
tries to skip the chunk in pieces of 512 bytes by using the MIN() macro, but
ends up passing the negative chunk length to connect.c:fd_read(). As
fd_read() takes an int argument, the high 32 bits of the chunk length are
discarded, leaving fd_read() with a completely attacker controlled length
argument.
CVE-2017-13090: The retr.c:fd_read_body() function is called when processing
OK responses. When the response is sent chunked, the chunk parser uses
strtol() to read each chunk's length, but doesn't check that the chunk
length is a non-negative number. The code then tries to read the chunk in
pieces of 8192 bytes by using the MIN() macro, but ends up passing the
negative chunk length to retr.c:fd_read(). As fd_read() takes an int
argument, the high 32 bits of the chunk length are discarded, leaving
fd_read() with a completely attacker controlled length argument. The
attacker can corrupt malloc metadata after the allocated buffer.
Drop now upstreamed patch and change to .tar.lz as .tar.xz is no longer
available.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes; mostly for crashes and rendering issues, plus
one important fix for the layout or Arabic text.
Release notes:
https://webkitgtk.org/2017/10/27/webkitgtk2.18.2-released.html
Even though an acconpanying security advisory has not been published
for this release, the release contains fixes for several crashes (one
of them for the decoder of the very common GIF image format), which
arguably can be considered potential security issues.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-15906 - The process_open function in sftp-server.c in OpenSSH
before 7.6 does not properly prevent write operations in readonly mode,
which allows attackers to create zero-length files.
For more details, see the release notes:
https://www.openssh.com/txt/release-7.6
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.2.11 fixes important issues. From the release notes:
================================================================================
Redis 3.2.11 Released Thu Sep 21 15:47:53 CEST 2017
================================================================================
Upgrade urgency HIGH: Potentially critical bugs fixed.
AOF flush on SHUTDOWN did not cared to really write the AOF buffers
(not in the kernel but in the Redis process memory) to disk before exiting.
Calling SHUTDOWN during traffic resulted into not every operation to be
persisted on disk.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-2888 - An exploitable integer overflow vulnerability exists
when creating a new RGB Surface in SDL 2.0.5. A specially crafted file can
cause an integer overflow resulting in too little memory being allocated
which can lead to a buffer overflow and potential code execution. An
attacker can provide a specially crafted image file to trigger this
vulnerability.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d59/d5992dcc9a49ee77afaebdcc9448ac1868fa7de1/http://autobuild.buildroot.net/results/e89/e894f21ce1983ee3bd8d65a8e59e1adab9a62707/
The configure script automatically enables support for the raspberry pi
video backend if it detects the rpi-userland package. Unfortunately it
hardcodes a number of include/linker paths unsuitable for cross compilation,
breaking the build:
if test x$enable_video = xyes -a x$enable_video_rpi = xyes; then
..
RPI_CFLAGS="-I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux"
RPI_LDFLAGS="-L/opt/vc/lib -lbcm_host"
fi
So explicitly disable it until the configure script is fixed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-14919 - In zlib v1.2.9, a change was made that causes an
error to be raised when a raw deflate stream is initialized with windowBits
set to 8. On some versions this crashes Node and you cannot recover from
it, while on some versions it throws an exception. Node.js will now
gracefully set windowBits to 9 replicating the legacy behavior to avoid a
DOS vector.
For more details, see the announcement:
https://nodejs.org/en/blog/vulnerability/oct-2017-dos/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <<a href="mailto:peter@korsgaard.com">peter@korsgaard.com</a>><br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
(a) When installing themes with unterminated colour formatting
sequences, Irssi may access data beyond the end of the
string. (CWE-126) Found by Hanno Böck.
CVE-2017-15228 was assigned to this issue.
(b) While waiting for the channel synchronisation, Irssi may
incorrectly fail to remove destroyed channels from the query list,
resulting in use after free conditions when updating the state
later on. Found by Joseph Bisch. (CWE-416 caused by CWE-672)
CVE-2017-15227 was assigned to this issue.
(c) Certain incorrectly formatted DCC CTCP messages could cause NULL
pointer dereference. Found by Joseph Bisch. This is a separate,
but similar issue to CVE-2017-9468. (CWE-690)
CVE-2017-15721 was assigned to this issue.
(d) Overlong nicks or targets may result in a NULL pointer dereference
while splitting the message. Found by Joseph Bisch. (CWE-690)
CVE-2017-15723 was assigned to this issue.
(e) In certain cases Irssi may fail to verify that a Safe channel ID
is long enough, causing reads beyond the end of the string. Found
by Joseph Bisch. (CWE-126)
CVE-2017-15722 was assigned to this issue.
For more details, see the advisory:
https://irssi.org/security/irssi_sa_2017_10.txt
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing just the endianness flag to LD is not enough. We need to pass
the right emulation flag which will set everything for us, not only the
endianness.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tool hciattach_bcm43xx defines the default firmware path in `/etc/firmware`,
but the Broadcom firmware blobs are usually stored in `/lib/firmware`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-13685: The dump_callback function in SQLite 3.20.0 allows
remote attackers to cause a denial of service (EXC_BAD_ACCESS and
application crash) via a crafted file.
CVE-2017-15286: SQLite 3.20.1 has a NULL pointer dereference in
tableColumnList in shell.c
because it fails to consider certain cases where
`sqlite3_step(pStmt)==SQLITE_ROW` is false and a data structure is never
initialized.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/57d/57d9f0ea27e5c8ba73002bd1d0b33027f27a3779/http://autobuild.buildroot.net/results/7c3/7c3133e822c997879fe00923ba0ad7903656c2e1/
bootstrap by default runs ./tools/build/src/engine/build.sh --guess-toolset
to detect what toolchain (compiler variant). On x86 this returns gcc, but
on the ppc64le gcc112 autobuilder this returns xlcpp causing bootstrap.sh to
get confused and bail out:
./bootstrap.sh ..
Building Boost.Build engine with toolset ... tools/build/src/engine/###
\### No toolset specified. Please use --toolset option.
\###
\### Known toolsets are: acc, borland, cc, como, clang, darwin, gcc, gcc-nocygwin, intel-darwin, intel-linux, intel-win32, kcc, kylix, metrowerks, mipspro, msvc, qcc, pathscale, pgi, sun, sunpro, tru64cxx, vacpp, xlcpp, vc7, vc8, vc9, vc10, vc11, vc12, vc14, vc141, vmsdecc
\###/b2
Fix it by explicitly specifying the gcc toolset mode to bootstrap, similar
to how it was already done for the bjam invocations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some documentation about running the pc defconfigs in qemu.
In particular, document the use of the -bios parameter to use the OVMF
firmware to test the UEFI image.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).
However, older gcc versions do not offer this feature.
So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
https://reproducible-builds.org/specs/source-date-epoch/https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html
Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.
gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Python 3.x on MIPS with musl fails because the libffi code
uses a "#ifdef linux" test to decide if we're building on Linux or
not. When building with -std=c99, "linux" is not defined, so instead
of including <asm/sgidefs.h>, libffi's code tries to include
<sgidefs.h>, which doesn't exist on musl.
The right fix is to use __linux__, which is POSIX compliant, and
therefore defined even when -std=c99 is used.
Note that glibc and uClibc were not affected because they do provide a
<sgidefs.h> header in addition to the <asm/sgidefs.h> one.
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: reformat patch with Git, add a better commit log and description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, HOSTCC and HOSTCXX are set to their _NOCACHE variants in the
'dependencies' target. This is needed because at that time, ccache is
not built yet - host-ccache is one of the dependencies. However, because
this override is only specified for the 'dependencies' target (and
thereby gets inherited by its dependencies), the override is only
applied when the package is reached through the 'dependencies' target.
This is not the case when one of DEPENDENCIES_HOST_PREREQ is built
directly from the command line, e.g. when doing 'make host-ccache'. So
in that case, ccache will be built with ccache... which fails of
course.
To fix this, directly apply the override to the DEPENCIES_HOST_PREREQ
targets.
Note that this only fixes the issue for 'make host-ccache', NOT for
e.g. 'make host-ccache-configure'.
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
[Arnout: improve commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2017-9410: fill_buffer_resample function in libmp3lame/util.c heap-based
buffer over-read and ap
CVE-2017-9411: fill_buffer_resample function in libmp3lame/util.c invalid
memory read and application crash
CVE-2017-9412: unpack_read_samples function in frontend/get_audio.c invalid
memory read and application crash
Drop patches now upstream or no longer needed:
0001-configure.patch: Upstream as mentioned in patch description
0002-gtk1-ac-directives.patch: Upstream as mentioned in patch
description/release notes:
Resurrect Owen Taylor's code dated from 97-11-3 to properly deal with GTK1.
This was transplanted back from aclocal.m4 with a patch provided by Andres
Mejia. This change makes it easy to regenerate autotools' files with a simple
invocation of autoconf -vfi.
0003-msse.patch: Not needed as -march <x86-variant-with-msse-support>
nowadays implies -msse.
With these removed, autoreconf is no longer needed.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
that allows optional dependencies
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- use "luainterpreter" instead of "lua" in the dependencies
- replace with a Git formatted patch that doesn't comment code but
removes it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/ffc/ffc9c10c55c2838ab7002c5ec35244e9bfe46189/
Commit dfa1817d31 (openldap: supports only the real OpenSSL, not LibreSSL)
tried to ensure openldap would only use openssl, but changed the wrong
variable. OPENLDAP_TLS is passed to configure, so it shouldn't be changed:
./configure --target=aarch64-buildroot-linux-gnu .. --with-tls=libopenssl ..
Configuring OpenLDAP 2.4.45-Release ...
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-buildroot-linux-gnu
checking target system type... aarch64-buildroot-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for aarch64-buildroot-linux-gnu-strip... /usr/lfs/v0/rc-buildroot-test/scripts/instance-0/output/host/bin/aarch64-linux-gnu-strip
checking configure arguments... configure: error: bad value libopenssl for --with-tls
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the upstream announcement:
http://www.openwall.com/lists/oss-security/2017/10/19/5
Felix Wilhelm has discovered a flaw in the dns response parsing for
musl libc 1.1.16 that leads to overflow of a stack-based buffer.
Earlier versions are also affected.
When an application makes a request via getaddrinfo for both IPv4 and
IPv6 results (AF_UNSPEC), an attacker who controls or can spoof the
nameservers configured in resolv.conf can reply to both the A and AAAA
queries with A results. Since A records are smaller than AAAA records,
it's possible to fit more addresses than the precomputed bound, and a
buffer overflow occurs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous version was by mistake mixed up with the patch 'gst-plugins-bad:
openjpeg: Remove compatibility with openjpeg 2.0'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes a bug with the BR2_TOOLCHAIN_HAS_THREADS variable
handling which causes CGO_ENABLED to be always 0.
Furthermore, it fixes the cross compilation options for the go
compiler: setting CGO_ENABLED should be done only for the target
compiler not the host one.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Christian Stewart <christian@paral.in>
If selected use:
- system/buildroot harfbuzz in case __sync for 4 bytes is supported
- qt harfbuzz otherwise (using QAtomic instead)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gpu_mem option is not using the proper option argument which causes sed to
fail.
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.
Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is just a bug-fix release.
Removing 0003-BUG-Ensure-_npy_scaled_cexp-f-l-is-defined-when-need.patch
as it is a part of the release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At this point, libressl can be added to the openssl virtual package.
- Remove the entry package/libressl/Config.in from package/Config.in
- Remove the file: package/libressl/Config.in
- Add libressl entry to package/openssl/Config.in
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wpa_supplicant will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevent will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openldap will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
opusfile will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mosquitto will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
softether tries to use SSLv3 functionality as a fallback. LibreSSL
doesn't support SSLv3 anymore. Two main issues prevent a patch:
- Trying to wrap the sslv3 functionality from the source with a guard
clause results in linking errors after compiling is done.
- There are multiple security vulnerabilities with using sslv3.
- There are multiple security issues in github pertaining to using
sslv3.
- This project seems to not be updated very often, and the security
issues are being ignored it seems.
For people who still want to use softether, they will have to use
libopenssl.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
heirloom-mailx has two small issues when compiling against LibreSSL:
- RAND_egd is used (LibreSSL does not support RAND_egd)
Solution: "Guard" the code calling RAND_egd
- SSLv3_client_method function is used (LibreSSL does not support SSLv3)
Solution: "Guard" the code with #ifndef OPENSSL_NO_SSL3
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages that use openssl are not compatible with libressl, only
with the real openssl (known as libopenssl in Buildroot). So before we
add libressl as a provider for the openssl virtual package, we
introduce a BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL hidden option that
packages incompatible with LibreSSL will be able to select.
This will allow packages that need OpenSSL to continue using "select",
without having to change to using "depends on" dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To ease the transition to having both OpenSSL and LibreSSL, there has to be
a new virtual package introduced to handle both.
Instead of making a libssl, and adding OpenSSL and libressl to that package,
it will be far easier to move openssl to libopenssl and to make OpenSSL
a virtual package. This offers a few advantages:
- BR2_PACKAGE_OPENSSL is still a visible symbol with no dependencies.
- It does not require a huge patch to convert every instance of
OpenSSL -> libssl)
- Users will be able to update without ever having to select anything new.
- LibreSSL can be added at a later date to the virtual package.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_OPENSSL to the value
"host-libopenssl" as we always want to use the original OpenSSL for
the host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux 4.0 kernel doesn't build with gcc 6.x, which is used since
the toolchain update in commit
193dfffa83 ("support/testing: use more
recent toolchains"). So let's update to Linux 4.11 instead (like the
existing Qemu x86 defconfig does), and update the kernel configuration
file accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.
This produces the warning:
.config:2216:warning: override: KERNEL_GZIP changes choice state
is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.
Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..
Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl has a bug in that <sched.h> defines CPU_ZERO(), which uses
memset(), but it doesn't have the prototype for it. This has been
fixed by upstream musl but until we rebuild our toolchains, let's have
a patch for Boost that works around this problem. We will of course
remove this patch once musl is updated to 1.1.17 and our toolchains
have been rebuilt.
Fixes:
http://autobuild.buildroot.net/results/6884cff634367cb640940051a60e5e13f30f70a2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 95c15aaf15. It was
mistakenly pushed, and causes problems because it installs the shared
library to staging, but not to target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curl support is strongly recommended for multiplayer game.
The build system warn when curl is disabled:
cURL is required to load the server list
cURL is required to announce to the server list
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default pppd built by buildroot writes the list of nameservers to
/etc/resolv.conf instead of /etc/ppp/resolv.conf
This is not the default behavior of pppd and breaks name resolution
if several network interfaces are used. The change makes this optional
and enabled by default, to be backward compatible and to add a possibility
to turn this behavior off, if required.
Signed-off-by: Maksim Salau <msalau@iotecha.com>
[Arnout: extend the help text to explain that it won't work on readonly
rootfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove patches that has been merged/updated upstream
0001-fix-building-shared-libs.patch:
CmakeLists packages are rewritten.
0002-add-support-for-tz-package:
dd93fd2b3d
0003-add-missing-define.patch:
656b3be02d
0004-ffmpeg30.patch:
b7b66968f9
Also add sha256sum for license file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The coroutine2 functionality is now provided only through headers, the
compiled library has disappeared. Due to that passing "coroutine2" as
argument to --without-libraries. Hence, the
BR2_PACKAGE_BOOST_COROUTINE2 option is removed by this commit.
We don't need Config.in.legacy handling, because coroutine2 support is
now unconditionally available in boost.
While at it, add LICENSE_1_0.txt sha256sum to boost.hash.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop Config.in.legacy handling, reword commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes (many of them related to rendering, plus one
important fix for touch input) and many security fixes.
Release notes:
https://webkitgtk.org/2017/10/18/webkitgtk2.18.1-released.html
Fixes CVE-2017-7081, CVE-2017-7087, CVE-2017-7089, CVE-2017-7090,
CVE-2017-7091, CVE-2017-7092, CVE-2017-7093, CVE-2017-7094,
CVE-2017-7095, CVE-2017-7096, CVE-2017-7098, CVE-2017-7099,
CVE-2017-7100, CVE-2017-7102, CVE-2017-7104, CVE-2017-7107,
CVE-2017-7109, CVE-2017-7111, CVE-2017-7117, CVE-2017-7120,
CVE-2017-7142:
https://webkitgtk.org/security/WSA-2017-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
configure: WARNING: unable to find required header jpeglib.h
configure: WARNING: unable to find required library jpeg
configure: error: some required prerequisites were not found
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for is set to BR2_OPTIMIZE_S, the help comment designated
BR2_OPTIMIZE_0 as default.
Changed the help comment to show that BR2_OPTIMIZE_S is the default.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-Remove-incorrect-dependency-from-install-data-hook.patch is
patching Makefile.am, so we need to autoreconf. If we don't do this,
we get build failures such as:
configure.ac:3: error: version mismatch. This is Automake 1.15.1,
configure.ac:3: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:3: comes from Automake 1.15. You should recreate
configure.ac:3: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
You should only need it if you modified 'Makefile.am' or
'configure.ac' or m4 files included by 'configure.ac'.
Fixes:
http://autobuild.buildroot.net/results/440c9edd34d56d9207b9f1ee326a14a1c757b27d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v2 --> v3:
- use 'Hashes for license files:' instead of repeated
'Hash for license file' (suggested by Thomas Petazzoni)
Changes v2:
- add reviewed-by and minor commit title change (removed package prefix)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0002-disable-tests.patch modifies Makefile.am, so we have to
autoreconf. It hasn't been seen until now, but becomes very clear
since the bump of automake to 1.15.1, as we're seeing build failures
such as:
configure.ac:66: error: version mismatch. This is Automake 1.15.1,
configure.ac:66: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:66: comes from Automake 1.15. You should recreate
configure.ac:66: aclocal.m4 with aclocal and run automake again.
Fixes:
http://autobuild.buildroot.net/results/3402357d8e90f1866dfeaee7bb61119d80dc8bcb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-7805 - Martin Thomson discovered that nss, the Mozilla
Network Security Service library, is prone to a use-after-free vulnerability
in the TLS 1.2 implementation when handshake hashes are generated. A remote
attacker can take advantage of this flaw to cause an application using the
nss library to crash, resulting in a denial of service, or potentially to
execute arbitrary code.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.
While at it, remove the custom scripts for generating the SD card image
and use the standard scripts instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ifupdown-scripts has some .empty files to maintain empty directories
in git. Previously this package used to be part of the skeleton which
used SYSTEM_RSYNC to copy the directories to the target. When it was
split into a separate package, cp -a was used to do the copy instead,
which copies the .empty files.
Change to SYSTEM_RSYNC which excludes .empty files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The WITH_PTHREADS_PF option was errantly categorized as a Windows only option.
WITH_PTHREADS_PF actually enables a parallelization framework that utilizes
pthreads to optimize some inner for loops of different OpenCV operations. This
optimization is available on any platform that has pthreads.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "virt" machine supports disk emulation, so use a ext4 rootfs instead of
initramfs for consistency with the other qemu defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license file got reformatted as reStructuredText, but the license itself
didn't change.
Drop unneeded md5sum and add license hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the target and host flex packages do not behave the same in
terms of patching: the target variant has a patch hook that disables
building the programs (because they are not needed, and do not build
on no-MMU platforms). However, this hook is obviously not executed for
host-flex, because we really want the host flex binary to be built.
In preparation for the introduction of out-of-tree package build, it
is important that we don't do different things in the patch hooks for
the target and host variant of a given package, because the source
tree will be shared between the target and host builds.
To solve this, we introduce a --disable-program configure option,
through a patch to the flex configure.ac and Makefile.am. This patch
makes the current 0001-flex-disable-documentation.patch no longer
needed.
Furthermore, building the documentation is a PITA: flex.1 depends on
configure.ac and a few other files generated during the build. Touching
flex.1 does not work, because automake will forcibly remove the files
when its prerequisites are too old, so pre-requisites of flex.1 will
always be more recent than flex.1. So, we add a patch that adds a
--disable-doc configure option.
Fixes:
http://autobuild.buildroot.org/results/f70/f70b39632535bb9692d0a032166b2f4104532967/http://autobuild.buildroot.org/results/525/52567afdfe7992b3518de0e01227ba14aa300f21/
[...]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase on-top of master,
- add patch to not build the documentation, because simply touching
flex.1 is no longer enough.
- keep install in target/, for shared builds
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Adrian Perez de Castro <aperez@igalia.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream wiringpi apparently has some issues with their release
process: their 2.42 and 2.44 tags point to the exact same commit. And
at the 2.44 tag, the VERSION file was not updated to indicate that
it's version 2.44.
A follow-up commit added support for the RPi Zero-W, and fixed the
VERSION file to contain 2.44. So let's use this follow-up commit as
the new version for wiringpi.
This will hopefully clarify things, and avoid confusion such as the
one reported in bug #10391 [1].
[1] https://bugs.busybox.net/show_bug.cgi?id=10391
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Neon is compulsory on AArch64, and BR2_ARM_CPU_HAS_NEON is false on
AArch64. Therefore, this change is needed to enable building VC4
gallium driver for Rpi3 using AArch64.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Linuxptp to the latest version from 1. September 2017
This update brings bugfixes and minor enhancements.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the download directory, when specified with the -d option, is
only used to store the files downloaded by the testing infra, not those
downloaded by Buildroot.
So, we end up with this situation:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(TOP_DIR)/dl
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(BR2_DL_DIR)
This is not very consistent.
We change the behaviour so that the value of -d always takes precedence,
and is used by Buildroot as well, giving this new behaviour:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finally there's working ARC port of glibc thanks to Vineet and Cuper!
This port is based on pretty recent glibc's master branch and ARC
changes are being reviewed now in glibc's mailing list.
Thus we again have to use sources from our GitHub but as soon as there's
a glibc release with our patches applied we'll switch to upstream releases
and will drop our glibc GitHub repo alltogether.
Note now we cut tags in glibc repo simultaneously with tags
in Binutils and GCC repos and so to make sure everything works in the best
way we plan to update glibc tag together with Binutils and GCC.
Also note as of today ARCompact (AKA ARCv1 ISA) is not supported in glibc
but we plan to fix it soonish so for now we make glibc intentionally
dependent on archs38.
Also note we are not creating directory "2.26" because all patches for glibc
ver 2.26 applies to arc glibc port.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Waldemar Brodkorb <wbx@openadk.org>
CC: Romain Naour <romain.naour@gmail.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mainline kernel is able to decode video via the coda driver.
Add support for it and also add some explanation on how VPU decoding
can be tested with Gstreamer.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-13720 - Check for end of string in PatternMatch
CVE-2017-13722 - pcfGetProperties: Check string boundaries
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d1011f89a1 (audit: update legal info) set the libraries license
to "unclear" because of GPL license text in a few libraries source
files. Upstream audit package commit 239765162fa494 (Correct the
licensing description in lib/ and auparse/ to be LGPL as was always
intended) clarified the license in these files.
Add license files hashes.
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
start-stop-daemon fails on -R when not compiled with
CONFIG_FEATURE_START_STOP_DAEMON_FANCY. Thus, do not rely on -R
during stop to avoid a race condition during restart.
Use a sleep 1 during restart instead, as suggested by Peter Korsgaard
in <87bmluk4bm.fsf@dell.be.48ers.dk>.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package doesn't actually rely on the msgpack runtime libraries, it's a
pure python implementation.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Modern versions of msgpack are hosted on Github. Msgpack switched
their build systems from autotools to cmake a while back. The licence
was also updated from Apache to Boost.
Signed-off-by: bradford barr <bradford@density.io>
[Thomas: drop custom install commands, add LICENSE_1_0.txt to license
files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is based on the bcg729 library from Belledonne Communica-
tions which is wrapped into a freeswitch module to provide a native
G729.A codec.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps ARC toolchain to arc-2017.09-rc1.
The arc-2017.09 series is built on top of upstream GCC 7.1.1 and
Binutils 2.29 so please expect all kinds of breakages related to GCC
7.x as we saw earlier with the move from 4.8 to 6.x :)
Note patches for both GCC and Binutils were updated with
copies from corresponding mainline versions, i.e.
"package/gcc/7.2.0" and "package/binutils/2.29".
Please note that it is a release candidate and it might contain some
breakages, please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: drop binutils patch related to the Blackfin architecture.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce imx6-sabreauto_defconfig that uses mainline U-Boot and
mainline kernel.
As mainline U-Boot supports SPL, it is possible to boot the same
sdcard.img in the three mx6sabreauto variants: imx6q, imx6dl and imx6qp.
Also update the readme.txt file to explain how to build an image for
mx6sabreauto boards using mainline U-Boot and kernel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: regenerate gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the explanation of the need for using the performance governor.
This problem is specific to mx6sabresd board and the Egalax touchscreen
running a mainline kernel, so make this clear.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
parted uses libiconv but doesn't link with it. All the checks are there
in configure, but the Makefile.am doesn't add it to the link. Add a
patch to fix this.
Also add an optional dependency on libiconv, so it is reproducible.
While we're at it, regenerate the existing patches on top of v3.2, and
make patch 0003 a properly git formatted one.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: srg.venema@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I got this error when attempting to build:
aclocal: error: couldn't open directory 'm4': No such file or directory
So we now have the post patch hook to ensure the m4 directory is
present.
In addition, the package now sets a variable with the Git SHA1 so that
the binary contains the expected output for --version.
Specific configurations of uClibc cause a build failure in pdbg. This commit
adds a patch to remove the definition of the offending macro (it is unused in
the source).
In file included from usr/include/stdio.h:71:0,
from libpdbg/fake.c:17:
include/bits/uClibc_stdio.h:149:16: error: expected identifier or ‘(’ before ‘;’ token
void *__unused; /* Placeholder for codeset binding. */
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python3 support was added to libiio in version 0.10.
This commit adds the option to compile libiio bindings if python3 was
selected instead of python.
Signed-off-by: Béla Becker <bela.becker@pcbdesign.hu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 95cb1465f0 added the
atmel_sama5d27_som1_ek_mmc_dev_defconfig but forgot to update
.gitlab-ci.yml. Update it now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The parts of the readme.txt that specify the board-specific aspects
(DTB files, KMS config json file) were a bit confusing. For the DTB
files this is solved by putting the board it applies to after the DTB
file name. For the json files, this is solved by adding an extra line,
so the CinematicExperience-demo is clearly separated from the setting
of QT_QPA_EGLFS_KMS_CONFIG.
Also remove the 'for all boards' line in the beginning, it doesn't add
any value.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 12 Kit.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 10.1 Kit.
Since the defconfig is no longer only for the starter kit, remove that
from BR2_TARGET_GENERIC_ISSUE.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
musl provides its own SYS_getrandom definition, but not GRND_NONBLOCK.
This breaks the build with kernel headers older than v3.17. Add a patch
adding a local definition of GRND_NONBLOCK to fix the build.
The following defconfig reproduces the build failure:
BR2_x86_pentium_mmx=y
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_KERNEL_HEADERS_3_12=y
BR2_PACKAGE_LIBRESSL=y
The getentropy_linux.c file is in upstream tarball, but not in its git
repository. It originates from OpenBSD. For this reason the patch is
against the tarball, but not git formatted.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: change filename to correspond to how git creates it]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This upstream patch fixes the build error produced by building for
powerpc 32bit after the glibc bump to 2.26 with the following internal
toolchain config.
gcc5.4.0
glibc2.26
bin2.28.1
linux4.1.43
Failure log:
CC net/proto-ipv4.o
net/proto-ipv4.c: In function ‘ip_setsockopt’:
net/proto-ipv4.c:231:49: error: ‘UIO_MAXIOV’ undeclared (first use in this function); did you mean ‘_IO_MAGIC’?
so->optlen = rnd() % sizeof(unsigned long)*(2*UIO_MAXIOV+512);
^~~~~~~~~~
_IO_MAGIC
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: add Matthew's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the remaining code style warnings from flake8:
- properly indent continuation lines;
- use proper code to test a parameter is not None.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the trivial warnings from flake8:
- remove modules imported but unused;
- use 2 lines before class or module level method;
- remove blank line at end of file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change all defconfig fragments to take advantage of
"cf3cd4388a support/tests: allow properly indented config fragment".
Make each defconfig fragment:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the strip out of leading spaces in defconfig fragments from the
BRTest class to the Builder class. It actually postpones the strip out,
consequentially allowing test cases to post-process the defconfig in
their own __init__ before calling the __init__ method from BRTest.
Moving this code to the Builder class also allows any new test class
that inherits from BRTest to reuse the same code even if the new class
overrides the setUp method.
At same time, prepend a newline to the jlevel handling otherwise it
would stop working for defconfig fragments that don't end in a newline.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot nowadays also uses kconfig, so we can handle config fragments like we
do for barebox/busybox/linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
And add hashes for the license files while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix for CVE-2017-9798 is included in this release, so this patch is
removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Update commit log: not a security bump]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump at91sam9x5ek, atmel_sama5d2_xplained, atmel_sama5d3_xplained and
atmel_sama5d4_xplained all variants to linux4sam_5.7. The 3 foundation
components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency is actually only for the kernel module (and thus on the
runtime kernel version rather than kernel headers), but as we don't know the
runtime version in kconfig and the user space part doesn't make much sense
without the kernel module this will have to do.
[Peter: extend commit message, add comment to Config.in as suggested by
Arnout, fix off-by-one in comment text]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is only for the device-mapper library, so a user selectable
Config.in.host option isn't needed.
[Peter: add host-pkgconf dependency as pointed out by Arnout]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues and adds a number of other bigfixes:
2.8.1: Changelog:
https://lists.gnu.org/archive/html/qemu-devel/2017-03/msg06332.html
CVE-2017-2615 - display: cirrus: oob access while doing bitblt copy backward
mode
CVE-2017-2620 - display: cirrus: out-of-bounds access issue while in
cirrus_bitblt_cputovideo
CVE-2017-2630 - nbd: oob stack write in client routine drop_sync
2.8.1.1 Changelog:
https://lists.gnu.org/archive/html/qemu-devel/2017-04/msg03460.html
CVE-2017-7471 - 9p: virtfs allows guest to change filesystem attributes on
host
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.net/results/8e6/8e639ab8912e7d884fd8e6dbb1ca8b49451dd766/
/home/test/autobuild/run/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x54): undefined reference to `inflate'
/home/test/autobuild/run/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_compress_block':
c_zlib.c:(.text+0xd4): undefined reference to `deflate'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
./configure: --disable-uuid is obsolete, UUID support is always built
Change-Id: I9e278418d19e15bbbd3ea233658cd62f75e3385c
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Qt with QtWebKit on configuration step there is
a check which disables QtWebKit build with GCC 6+.
Back in the day nobody thought about building Qt with GCC
version greater than 5.x. And now with modern GCCs like
6.x and 7.x this assumption gets in the way.
Given in Buildroot today we don't have GCC older than 4.9
it should be safe to remove now meaningless check completely
by adding patch to qt.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, bridge-utils wants to grap the headers from the linux-headers
package, so we point it directly there, as has been the case since we
first added bridge-utils in 2003 (c8eea31d3f), and then further refined
in 2005 (178a317d26) which is the first moment we pointed to the linux-
headers directory.
However, ther are two things wrong with that.
First, the headers are not directly in $(LINUX_HEADERS_DIR). Instead,
they are in a sub-directory thereof. So, we could not have found them
the way we are doing now.
Second, this definitely does not work when using an external toolchain,
because there is not linux-headers package enabled then.
Yet, against all odds, bridge-utils has valiantly deflected all rocks
thrown its way, day-in day-out building without any issue in every
autobuilders it's been confronted with. Good boy, good boy. :-)
And indeed, it turns out that the required headers are easily found from
within the sysroot of the toolchain. Wonders! :-)
But there's still a gotcha: the default search path is still a hard
coded path pointing to the installed kernel source tree on the host.
So, we still have to pass this option, but we can simply point to the
sysroot.
[Peter: point to sysroot instead of non-existing directory]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Glibc bump to 2.26 exposed this missing header when building with the
following combination using an i386 internal toolchain:
gcc5.4.0
bin2.28.1
linux4.1.43
Logfile snippet:
2017-10-02T00:08:11 ^
2017-10-02T00:08:12 rpc.c: In function ‘nsm_recv_getport’:
2017-10-02T00:08:12 rpc.c:469:13: error: ‘UINT16_MAX’ undeclared (first use in this function)
Upstream: https://bugzilla.linux-nfs.org/show_bug.cgi?id=312
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The COPYING file is part of the xf86-input-tslib project's source tree.
Let's include the hash for it's current version.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those cores are not supported in upstream gcc, not even in master.
The only toolchain that supported those core was the 2014R1 ADI
rebuilt toolchain, but we removed it in 311bc13 (toolchain: kill
ADI Blackfin toolchain) because there was too many issues with it.
ADI has not released any newer toolchain since then.
There is little hope for those cores now, so remove them.
Support for those cores has been useless and unusable for a while
without nobody noticing, therefore we intentionally skip adding
Config.in.legacy. This would require keeping code in
arch/Config.in.bfin since the options being removed are inside a
choice...endchoice block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: explain why we don't add the options to Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc does not have support for C-Sky, and we do not have a
vendor tree for it either (yet?).
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures or specific cores do not have support in upstream
gcc. Currently, they are individually listed as exclusions in the
toolchain choice.
This poses a maintainance burden, as the knowledge about what gcc
version supports what architecture is split across many places: the
toolchain choice, the gcc version choice, the external toolchains.
As a first step, add a blind option that architectures or individual
cores may select to indicate they lack support in our internal backend.
Actual use of the option will come in followup patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since tslib's COPYING file in part of the source tree, we can easily
include it's hash for the given version here.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop direct sed'ing of config.h for HAVE_CONNTRACK, HAVE_LUASCRIPT, and
HAVE_DBUS. Use MAKE_OPTS COPTS parameters instead, like we do already
for all other options.
Rename DNSMASQ_ENABLE_LUA to DNSMASQ_TWEAK_LIBLUA since it now does only
that.
Merge two conntrack and three dbus conditional sections.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supported Lua version is now 5.2.
Add licenses hash.
Fixes a number of security issues:
CVE-2017-13704 - Crash when DNS query exceeded 512 bytes (a regression
in 2.77, so technically not fixed by this bump)
CVE-2017-14491 - Heap overflow in DNS code
CVE-2017-14492 - Heap overflow in IPv6 router advertisement code
CVE-2017-14493 - Stack overflow in DHCPv6 code
CVE-2017-14494 - Information leak in DHCPv6
CVE-2017-14496 - Invalid boundary checks allows a malicious DNS queries
to trigger DoS
CVE-2017-14495 - Out-of-memory Dos vulnerability
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the extraction commands entirely remove the urg directory,
which means the downloaded stamp will get removed, and thus a subsequent
build would try to re-download it.
It turns out that the directory extracted by urg is already correctly
named, so we just need to extract out of the build directory. This
highly simplifies the command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit eec04a7b7d.
The original commit bumped the package to a version which is at runtime
incompatible with Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, it was working by luck. Buildroot has fixed its definition
of HOST_DIR and pkg-autotools.mk uses the classical /usr prefix. So,
fix this sed expression to correctly replace $(HOST_DIR) by /usr in ERL
path.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed,so update the entry accordingly.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed, so update their entries accordingly.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We explicitly remove pkg-config files from target in the target-finalize
step, and our pkg-config looks for .pc files from staging, not target.
So, explicitly installing the .pc in target is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the host uses glibc 2.26 or newer, Flex will try to use the
newly-introduced reallocarray() function, but as it would not define
_GNU_SOURCE a segmentation fault would occur later on due to the
compiler assumming that the function is implicitly defined.
This issue manifests itself due to a crash of "stage1flex" during the
Flex bootstrap:
./stage1flex -o stage1scan.c ./scan.l
make[2]: *** [Makefile:1725: stage1scan.c] Segmentation fault (core dumped)
This imports the patch from the upstream Git repository, and adds flags
in the .mk file to rebuild the Autotools scripts and support files. Due
to the latter, the patch to disable the documentation is changed so it
modifies the .am file instead.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- Add Adrian's Sob and upstream ref to new patch;
- Keep patch 1 as patch 1;
- Keep Vicente as author of path 1;
- Add reason for autoreconf in a comment.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This doesn't compile with glibc 2.26 where reallocarray() as been introduced.
It's a nasty issue, when reallocarray() is available for the target, flex will
build a small tool called stage1flex for the host (using _FOR_BUILD) but with
the config.h generated for the target.
When the host doesn't have a glibc >= 2.26, reallocarray() is never defined
while building stage1flex:
misc.c:147:8: warning : implicit declaration of function « reallocarray »
[-Wimplicit-function-declaration]
mem = reallocarray(NULL, (size_t) size, element_size);
^~~~~~~~~~~~
misc.c:147:6: warning : assignment makes pointer from integer without a cast
[-Wint-conversion]
mem = reallocarray(NULL, (size_t) size, element_size);
^
Disable reallocarray for now, reallocarray() support may be
enabled in a followup patch.
Fixes:
stage1flex-misc.o: In function `allocate_array':
misc.c:(.text+0x38f): undefined reference to `reallocarray'
stage1flex-misc.o: In function `reallocate_array':
misc.c:(.text+0xc8a): undefined reference to `reallocarray'
collect2: error: ld returned 1 exit status
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since glibc >= 2.26, don't try to use getopt_long replacement bundled
with diffutils. It will conflict with the one from glibc.
The getopt copy bundled in glibc has been updated with the one from gnulib.
After a lot of warnings...
Fixes:
xstrtol-error.c: In function 'xstrtol_error':
xstrtol-error.c:84:26: error: invalid use of undefined type 'struct rpl_option'
option = long_options[opt_idx].name;
^
xstrtol-error.c:84:26: error: dereferencing pointer to incomplete type 'const struct rpl_option'
[...]
xstrtol-error.c:92:1: error: conflicting types for 'xstrtol_fatal'
xstrtol_fatal (enum strtol_error err,
^~~~~~~~~~~~~
In file included from xstrtol-error.c:20:0:
xstrtol.h:69:16: note: previous declaration of 'xstrtol_fatal' was here
_Noreturn void xstrtol_fatal (enum strtol_error,
^~~~~~~~~~~~~
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
float128 is now required on powerpc64le with glibc >= 2.26 toolchains.
Fixes:
running configure fragment for sysdeps/gnu
running configure fragment for sysdeps/powerpc/powerpc64le
checking if [...]powerpc64le-buildroot-linux-gnu-gcc supports binary128 floating point type... no
checking if the target machine is at least POWER8... yes
configure: error: *** binary128 floating point type (GCC >= 6.2) is required on powerpc64le.
In order to prepare the glibc bump to this version, we enable
binary128 floating point in gcc. This require at least gcc >= 6.2.
Disable gcc 4.x and 5.x for internal toolchain.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc: In function ‘int __sanitizer::TracerThread(void*)’:
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc:241:22: error: aggregate ‘sigaltstack handler_stack’ has incomplete type and cannot be defined
struct sigaltstack handler_stack;
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc: In function ‘int __sanitizer::TracerThread(void*)’:
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc:276:22: error: aggregate ‘sigaltstack handler_stack’ has incomplete type and cannot be defined
struct sigaltstack handler_stack;
^~~~~~~~~~~~~
The fix is already included in gcc 7.2 release [1]. We have to backport it to
all older gcc release since it's not included in any stable release yet.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=72edc2c02f8b4768ad660f46a1c7e2400c0a8e06
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Default prefix is set to `BR2_` but may be overidden by setting
BR2_PREFIX.
Example usage:
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --enable GNUPG
Check state of config option `BR2_PACKAGE_GNUPG`:
./utils/config --package --state GNUPG
y
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --disable GNUPG
Set `BR2_TARGET_GENERIC_ISSUE` to "Welcome":
./utils/config --set-str TARGET_GENERIC_ISSUE "Welcome"
Copied from the Linux kernel (4.13-rc6) source code and adapted to
Buildroot.
Thanks to Andi Kleen who is the original author of this script.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Arnout: merge the two tr invications]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The amount of GPU memory can be set using the new option --gpu_mem_XXX
(where XXX is the total amount of memory available on the board).
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use the maintainer's repository, update the package description, based
on the official one, and drop an obsolete patch.
Change-Id: I2170aa4c1cc57de2a25ef04e89a216b254f2a859
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an entry to explain how to run the glmark benchmark.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump the kernel version to 4.13.3.
Kernel 4.13.3 uses the /dev/dri/card0 device as rendering node, so
adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.09 uses SPL, so bump to this version so that we can
have a single qt5 image that supports the different imx6 sabresd
boards: imx6q, imx6dl and imx6qp.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The QT5 rootfs requires more space, so adjust it a larger size.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that SPL is supported a single image can run on the different
variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp.
So drop the 'quad' prefix from defconfig, directory and readme file
to make it generic.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The host menuselect tool is linked to our host libxml2 library, but it
is missing an RPATH to the host directory.
This is because menuselect does not use automake, so does not inherit
the LDFLAGS from the configure run.
We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make
environment.
At the same time, we also install the tool in the host directory, even
if not used from there, so that the sanity checks we run are properly
passed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We sanity-check the host executables that they have a correct RPATH
pointing to the host libraries.
This is currently done by looking for all files in $(HOST_DIR) that
match the 'ELF executable' pattern (a bit more complex, but that's
idea).
However, when an executable is built with -fPIE of -fpie, it no longer
appears to be an 'ELF executable', but it rather looks like an 'ELF
sheard object' (like if it were an library.
So, we miss those files.
It turns out that the problem is a real one, because quite a few
mainline distros, expecially those based on Debian for example, have
already switched to generating PIE code by default, and thus we miss on
a whole class of systems..
We fix that by simply looking if we can find an ELF interpreter in each
file. If we there is one, this is an ELF executable; if not, it may be
anything else: we don't care (not even about ELF libraries).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix package/nginx/S50nginx:
* On stop, use start-stop-daemon -R 1 to wait for the nginx processes
to actually stop. This fixes a race condition with restart, where
nginx fails to restart because start is called too early
w.r.t. stop. (This only works with Debian's start-stop-daemon,
however BusyBox's start-stop-daemon does not fail when given -R; it
just ignores the argument silently).
* Implement reload with an actual reload instead of a restart.
* Add force-reload.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass an offset of 1MB for the start of the rootfs.
Otherwise we get rootfs corruption when the bootloader is manually
written to the SD card.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch from github hash to an official release.
Several upstream patches are required to build the code correctly
on all platforms supported by buildroot.
The test application now uses fork().
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
[Arnout: Squash the two patches, MMU dependency was introduced with the
version bump.
Wrap assignments in libkcapi.mk differently.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.07 has switched to SPL boot, which allows the same binary to
boot on imx6dl, imx6q and imx6qp sabresd boards.
Switch to the SPL mechanism.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sysklogd had only SYSV init scripts. Add systemd service files to start
klogd and syslogd.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The symlink to /etc/systemd/system/syslog.service was pointing 4 levels up
to /usr/lib instead of 3 levels up.
This wasn't an issue on the actual system (/../ equals to / ) but was causing a
deadlink in the TARGET directory.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Dependency to json-c was dropped, updated reverse dependencies as well
and added optional dependency to libatomic_ops
https://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/configure.ac#n250
when __sync_bool_compare_and_swap is not available.
Removed patch applied upstream:
0002-webrtc-C-11-is-only-required-for-WebRTC-support.patch
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LIBC is really only used to construct the target tuple. To check if we
are using a uClibc toolchain, we use BR2_TOOLCHAIN_USES_UCLIBC.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building bash statically, configure does not initialize the
SHOBJ_STATUS variable. The SHOBJ_STATUS make variable in
examples/loadables/Makefile.in must resolve to either 'supported' or
'unsupported'. Otherwise, the install-$(SHOBJ_STATUS) target does not
exist.
This leads to the following build failure:
make[2]: Entering directory '.../output/build/bash-4.4/examples/loadables'
make[2]: *** No rule to make target 'install-', needed by 'install'. Stop.
make[2]: Leaving directory '.../output/build/bash-4.4/examples/loadables'
Makefile:793: recipe for target 'install' failed
with the following defconfig:
BR2_arm=y
BR2_STATIC_LIBS=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_BASH=y
Note that this doesn't terminate the build so it's not detected as an
error by the autobuilders.
Set SHOBJ_STATUS in the configure environment as a workaround.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Package switched to cmake without providing most of the autoconf
options previously available. Therefore we move all suboptions to
Config.in.legacy.
All patches are removed, the files to be patched do not exist anymore.
OPENOBEX_EXTRACT_CMDS is not needed anymore, upstream provides the
source as .tar.gz now.
Version 1.6 added support for libusb-1.x and udev. The current version
also supports bluez5_utils, not only bluez_utils.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: add help text to legacy options]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Includes some fixes for the Raspberry Pi, amongst many others.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reiterate once more that <packagename>_PATCH variable can point
to an arbitrary URL, not just to a path relative to <packagename>_SITE.
While we're at it, also explain that the patch should be added to the
.hash file.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
[Arnout: add sentence about .hash file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
configure.ac use PKG_CHECK_MODULES macro to find some libraries dependencies.
So add host-pkgconf in LVM2_DEPENDENCIES.
Fixes:
checking pkg-config is at least version 0.9.0... ./configure: line 9875: [...]/host/bin/pkg-config: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix libglu build error
CXXLD libGLU.la
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lXext
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lX11
collect2: error: ld returned 1 exit status
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
The nvidia binary blob is linked to libX11.so & libEext.so
$ output/host/bin/i586-buildroot-linux-gnu-readelf -a output/target/usr/lib/libGL.so | grep NEEDED
0x00000001 (NEEDED) Shared library: [libnvidia-tls.so.381.09]
0x00000001 (NEEDED) Shared library: [libnvidia-glcore.so.381.09]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.6]
0x00000001 (NEEDED) Shared library: [libdl.so.2]
which is also reflected by Libs-section of package/nvidia-driver/gl.pc.
To allow other packages linking to libGL.so provided by this package we
need to reflect the fact that xlib_libX11 & xlib_libXext are not
runtime-only dependencies.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build error
>>> libglu 9.0.0 Autoreconfiguring
configure.ac:50: error: Could not locate the pkg-config autoconf macros.
These are usually located in /usr/share/aclocal/pkg.m4. If your macros
are in a different location, try setting the environment variable
ACLOCAL="aclocal -I/other/macro/dir" before running autoreconf.
configure.ac:50: the top level
autom4te: /home/buildroot/br4/output/host/bin/m4 failed with exit status: 1
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Version 2.18.x includes support for remotely controlling WebKitGTK+
based browsers using the standard WebDriver API. Typically this is used
by Web developers, and in most cases it will be desirable to disable it
from builds.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release notes:
https://webkitgtk.org/2017/09/11/webkitgtk2.18.0-released.html
No corresponding WebKit Security Advisory (WSA) has been published.
All patches have been applied upstream.
This also bumps the required target GCC version, due to the WebKit code
now using more modern C++ features which were introduced in version
5.x of the compiler.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- propagate dependency to midori;
- mention in commit message why patches were removed.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While currently there is no in-tree Buildroot package which depends on
host-python-six, it can be needed to build external packages.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently it is always required to add package version as an argument to
the github helper. Since the version is always defined as PKG_VERSION,
drop this argument and generate it automatically inside the helper
routine.
The github helper function is extended to support both 2 and 3 argument
variants (ie. either use the provided package version argument or
automatically substitute with PKG_VERSION if not available), which can
make the transition of the package files easier as well allows using the
3-argument variant outside of package definitions.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The author of lbase64 maintains 3 separate versions of the package for
the 3 Lua versions. Only the 5.1 version is uploaded to luarocks, so
that is the one we currently support in Buildroot.
However, the three versions are nearly identical. With a small patch,
this allows us to support all Lua versions from a single tarball.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is based on works [1] and [2].
With this patch, one can run the Qt5 WebEngine quicknanobrowser sample
with the following options.
BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc" and
BR2_TOOLCHAIN_BUILDROOT_CXX (Qt 5 needs a toolchain w/ wchar, NPTL, C++,
dynamic library; for now it builds only with glibc)
BR2_PACKAGE_LIBERATION (Qt needs at least one font)
BR2_PACKAGE_QT5BASE_EXAMPLES (to install quicknanobrowser sample)
BR2_PACKAGE_QT5BASE_GIF (do display gif)
BR2_PACKAGE_QT5BASE_JPEG (do display jpeg)
BR2_PACKAGE_QT5BASE_PNG (do display png)
BR2_PACKAGE_QT5QUICKCONTROLS (needed by webengine)
BR2_PACKAGE_QT5QUICKCONTROLS2 (needed by webengine)
BR2_PACKAGE_QT5WEBENGINE (because it is what we want)
Qt WebEngine requires an Open(E)GL-capable backend. As an example, the
package rpi-userland must be enabled to build for a rpi.
BR2_PACKAGE_RPI_USERLAND (to enable OpenGL ES backend)
To browse for HTTPS websites, please consider adding the following
options as well for SSL/TLS.
BR2_PACKAGE_CA_CERT (for certificates)
BR2_PACKAGE_NTPD (to sync date for certificates)
Since version 5.9, chromium requires udev at runtime (see note 4).
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV (input backend)
To run quicknanobrowser
# cd /usr/lib/qt/examples/webengine/quicknanobrowser/
# ./quicknanobrowser https://www.buildroot.org/
Note: The chromium.inc has been generated using the following command.
( echo 'CHROMIUM_LICENSE_FILES = \' &&
cd output/build/qt5webengine-5.9.1/ && \
find "src/3rdparty/chromium/" -type f -iname "*LICENSE*" -o -iname "*COPYING*" -o -iname "*GPL*" | \
sed -e '/\.asm$/d' \
-e '/\.h$/d' \
-e '/\.c$/d' \
-e '/\.cc$/d' \
-e '/\.cpp$/d' \
-e '/\.pyc\?$/d' \
-e '/\.pl$/d' \
-e '/\.sha1$/d' \
-e '/\.patch$/d' \
-e '/licensecheck/d' \
-e 's,^,\t,' \
-e 's,$, \\,' | \
sort && \
echo '' ) >package/qt5/qt5webengine/chromium.inc
Note 2: Since 5.9.1, the chromium's copy of opus fails with neon [3].
Qt WebEngine can uses buildroot ffmpeg copy which compiles fine (using
qmake flag WEBENGINE_CONFIG+=use_system_ffmpeg). It implies selecting
the following options.
BR2_PACKAGE_FFMPEG
BR2_PACKAGE_OPUS
BR2_PACKAGE_LIBVPX
BR2_PACKAGE_WEBP
BR2_PACKAGE_WEBP_DEMUX
In file included from ../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:31:0:
/home/gportay/src/buildroot/output-rpi3-qt5.9/host/lib/gcc/arm-buildroot-linux-gnueabihf/6.4.0/include/arm_neon.h:8997:1: error: inlining failed in call to always_inline ‘vld1q_s32’: target specific option mismatch
vld1q_s32 (const int32_t * __a)
^~~~~~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:40:15: note: called from here
int32x4_t coef0 = vld1q_s32(coef32);
^~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-#pragma-messages’
Note 3: Version 5.6.2 causes a build issue while building chromium. The
build against this version is disabled until the release 5.6.3 is out.
Note 4: Here is trace when udev does not run
# cd /usr/lib/qt/examples/webengine/quicknanobrowser
# ./quicknanobrowser
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
[0101/000248.161973:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[0101/000248.384693:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[202:223:0101/000248.484954:FATAL:udev_loader.cc(38)] Check failed: false.
#0 0x0000742b93de <unknown>
#1 0x0000742c3c38 <unknown>
#2 0x000073e1e1aa <unknown>
#3 0x000073e1d96e <unknown>
#4 0x000073e1defa <unknown>
#5 0x000074af6364 <unknown>
#6 0x000074302878 <unknown>
#7 0x0000742c8fee <unknown>
#8 0x0000742c9f44 <unknown>
#9 0x0000742ca21e <unknown>
#10 0x0000742cac4c <unknown>
#11 0x0000742c87b2 <unknown>
#12 0x0000742da4f6 <unknown>
#13 0x000073ed9d38 <unknown>
#14 0x000073eda03c <unknown>
#15 0x0000742e9aec <unknown>
#16 0x0000742e71dc <unknown>
Aborted
Note 5: On rpi and depending on what is insinde the .config, more GPU
memory should be allocated to run properly qt samples.
#0 0x0000742c63de <unknown>
#1 0x0000742d0c38 <unknown>
#2 0x0000749d7bde <unknown>
#3 0x0000749e3c70 <unknown>
#4 0x00007530227c <unknown>
#5 0x000075302480 <unknown>
#6 0x0000752fb1e4 <unknown>
#7 0x00007430f878 <unknown>
#8 0x0000742d5fee <unknown>
#9 0x0000742d6f44 <unknown>
#10 0x0000742d721e <unknown>
#11 0x0000742d7ad6 <unknown>
#12 0x0000742d57b2 <unknown>
#13 0x0000742e74f6 <unknown>
#14 0x0000742f6a74 <unknown>
#15 0x0000742f41dc <unknown>
Received signal 6
#0 0x0000742c63de <unknown>
#1 0x0000742c66a0 <unknown>
#2 0x0000725b5d10 <unknown>
[end of stack trace]
qml: Render process exited with code 256 (abnormal exit)
# mount /dev/mmcblk0p1 /mnt
# sed '/^gpu_mem_/s,=.*,=200,' -i /mnt/config.txt
# umount /mnt
Note 6: The first patch fixes a build issue when samples are compiled
without the support of printing [4]. This patch is already merged in
branch 5.9 [5] and concerns only 5.9.1.
085c2c52 Always compile QWebEnginePage::print
It fixes the error below.
.obj/browsermainwindow.o: In function `BrowserMainWindow::printRequested(QWebEnginePage*)': browsermainwindow.cpp:(.text+0x2cc0): undefined reference to `QWebEnginePage::print(QPrinter*, QWebEngineCallback<bool> const&)'
The second patch loads both libEGL and libGLESv2 symbols implicitly
instead of loading them with explicitly using hard-coded locations. It
fixes a bug when providers of lib*GL does not create libraries named
libEGL.so.1 and libGLESv2.s2 [6]. This patch is already merged in branch
5.9 [7].
d4c621f6 Load libEGL and libGLES2 symbols implicitly
It fixes the error below.
[327:347:1221/085837:ERROR:surface_factory_qt.cpp(68)] Failed to load /usr/lib/libGLESv2.so.2: /usr/lib/libGLESv2.so.2: cannot open shared object file: No such file or directory
[1]: http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2]: https://patchwork.ozlabs.org/patch/640633/
[3]: https://patchwork.ozlabs.org/patch/791332/
[4]: https://bugreports.qt.io/browse/QTBUG-61510
[5]: https://codereview.qt-project.org/#/c/198041/
[6]: https://bugreports.qt.io/browse/QTBUG-57761
[7]: https://codereview.qt-project.org/#/c/199554/
Cc: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout:
- move more dependencies to _ARCH_DEPENDS;
- mention all toolchain dependencies in the comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add the possibility to choose more test tools than only integck
from the MTD utils test-suite.
Move the hidden BR2_PACKAGE_MTD_TESTS configuration to the bottom
of the page and make it visible. When checked, a new list of available
binaries is displayed and may be selected and compiled into the image
with the --enable-install-tests configure script option:
- flash_torture
- flash_stress
- flash_speed
- nandbiterrs
- flash_readtest
- nandpagetest
- nandsubpagetest
Most of these tests may be performed by inserting kernel modules
which are almost legacy so having the userspace tools available
might become useful.
Legacy handling for users who had BR2_PACKAGE_MTD_INTEGCK selected is
not needed: they also have the BR2_PACKAGE_MTD_TESTS option enabled in
their .config. That option has now become a selectable option so it is
not removed any more by oldconfig.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
[Arnout:
- fix threads and MMU dependency;
- order Config.in options and mtd.mk lines alphabetically;
- add note on legacy handling to commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
Commit cef57c9642 added
bananapi_m2_plus_defconfig but forgot to update .gitlab-ci.yml. Do it
now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
grub is no longer maintained: it is stuck at version 0.97 with huge
patches that have no opportunity to be applied upstream, as upstream
has even renamed it grub-legacy.
Besides, it no longer builds correctly with recent binutils versions,
and even the huge patches we could grab from Debian do not help the
slightest.
Since upstream really considers it dead, and there are at least two
alternatives (grub2 and syslinux), just remove grub.
Add a legacy entry.
Remove the test cases as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add license file hashes and use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: Add license file hash, use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DAHDI is the 'framework' to drive actual telehony cards. Using telephony
cards without signalling is pretty much meaningless, so signalling will
be added in later commits.
libtonezone is provided by dhadi-tools, while the dahdi headers are
provided by dahdi-linux. Go figure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also provides libraries, so install in staging as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dahdi-linux provides kernel modules to drive a variety of telephony
cards, ranging from low-end one-channel to higher-end multi-channel
cards. It also provides headers for userland to talk to those cards.
With a bit of love, dahdi-linux can use our kernel-module
infrastructure. Wee! :-)
Still, there are a few specificities about dahdi-linux.
First, it needs to install a few binary firmware blobs, which it wants
to download at install time. Since we do want to be able to do
completely off-line builds, we need to downlaod them manually. So we
have the full list of firmware blobs (even if some can only be used on
an i386/x86_64 target, we still uconditionally download them), for which
we have locally-computed sha256 (no hash provided by upstream for the
blobs).
Second, the install procedure for the firmware blobs needs to have
access to the Linux kernel .config file, so it can decide whether to
install the blobs or not. We can force not to install them, but we can't
force to install them... :-/ And anyway, we'd have to do the same check
as is already done by dahdi-linux, so no need to duplicate that.
Finally, the licensing is relatively weird. Although it is obvious and
straightforward for the most part of dahdi-linux, consisting of mostly
GPLv2 and a few LGPLv2.1, there is one gotcha.
Of the firmware blobs, one is provided as a .o file, with no licensing
information whatsoever, without any source available from upstream, but
is directly linked to a GPLv2 file.
This is very concerning, but there is not much we can do about it,
except delegate to the legal reviewer whether that is acceptable or not.
AS an aside, dahdi-linux drivers do not build with a kernel 4.0 or
later, as it uses internals that have been removed in linux-4.0. There
has been no update upstream dahdi-linux to fix that. There's not much we
can do, except warn the user in the help text.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: use SPDX license names and add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
asterisk uses backtrace() from execinfo.h to print beuatiful backtraces
when it fails. But execinfo is only reliably available with glibc, while
it is optionbal in uClibc and completely missing in musl.
So, only enable backtrace support for glibc toolchains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Asterisk: the flagship of telephony on Linux. These are the lines of
code whose continuous mission is to power small and large enterprises
telephony systems, to boldly provide IP PBX where no one has done so
before.
But it is a hell to get compiled... :-(
For starters, it needs a host tool, menuselect, to prepare its build
configuration. Unfortunately, the way it handles menuselect does not
apply very well for cross-compilation: the main ./configure calls out to
menuselect's own ./configure, and of course that runs with the same
environement, which is wrong for cross-compilation (because of variables
like CC, CFLAGS and the likes).
Furthermore, the paths to menuselect are imbricated about everywhere in
the main Makefile, so making it find menuselect in PATH is a lost cause.
Instead, we just patch-out the handling of menuselect, build it as the
host variant and copy it in place.
Now, asterisk wants to install a default set of sound files (for
answering machine stuff, I guess). They come come pre-bundled in the
official archive [0], but the buildsystem will want to download (at
install time) the sha1 files for each sound archive, to validate that
said archive is correct. However, the download is done via plain http,
so it still risks an MITM attack. And for Buildroot, it is not always
possible to download at install time, so we patch-out the sha1 check.
[0] http://downloads.asterisk.org/pub/telephony/asterisk/releases/
The official archive contains the sound archives plus a full set of
documentation. This makes it very big. Unfortunately, the hosting site
is rather slow, topping at about ~204kbps. So we get the archive from
the official mirror on Github. But that archive is missing the sound
archives, so we download them separately.
Some tests, like the crypt() one, are broken and could not have ever
possibly worked at all. Worse, the FFmpeg test is looking for headers
that FFmpeg removed more than 10 years ago and are virtually no longer
available in any distro. So, FFmpeg support is definitely not tested
by upstream and can't possibly work at all. Finally, trying to run
test-code does not work in cross-compilation.
As a final stroke of genius, asterisk checks for the re-entrant variant
of res_ninit(), and concludes that all such functions are available,
including res_nsearch(). Uclibc-ng has the former but not the latter, so
the build fails. Since there is no cache variable for that check, we
can't pre-feed that result to configure, and fixing it is a bigger
endeavour. So we make asterisk depend on glibc for now, until someone
is brave enough to fix it.
Almost all features are disabled for now. Support for additional
features will be added in subsequent patches now that we have a working
base.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- make libilbc a mandatory dependency instead of using the bundled one;
- add license, license files, and license file hashes;
- minor spelling corrections;
- remove redundant trailing backslash reported by check-package;
- rewrap help text to 72 columns instead of 68]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
MPD version 0.20 is affected by GCC bug 64735 and failes to build for
some archictuctures (NIOSII, ARMv4, ARMv5 and SPARCv8) with a GCC
toolchain less then version 7.
We added a version choice between 0.19 and 0.20 in Buildroot version
2017.02 as GCC 7 was not yet available at that time. This way, mpd could
still be build for those architectures.
As GCC 7 is now available in Buildroot remove the version choice for 0.19.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only a static library is built (and no _INSTALL_TARGET_CMDS are defined), so
there is no need to run the target-install step.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NS_ENABLE_SSL was renamed to MG_ENABLE_SSL in v6.0, commit e1dd3f06fe33
(Rename Mongoose constants: NS_ -> MG_, NSF_ -> MG_F_), so use the new name
instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No linking is done since the package was reworked for v6.x in commit
9860746ff (mongoose: bump to version 6.1), so drop LDFLAGS and the list of
libraries to link against.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This define is not used anywhere in the mongoose sources since v6.0 (commit
8927c9d22b3f), so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch fixing CVE-2017-14062:
Integer overflow in the decode_digit function in puny_decode.c in
Libidn2 before 2.0.4 allows remote attackers to cause a denial of
service or possibly have unspecified other impact.
This issue also affects libidn.
Unfortunately, the patch also triggers reconf of the documentation
subdirectory, since lib/punycode.c is listed in GDOC_SRC that is defined
in doc/Makefile.am. Add autoreconf to handle that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-2862 - An exploitable heap overflow vulnerability exists in the
gdk_pixbuf__jpeg_image_load_increment functionality of Gdk-Pixbuf 2.36.6. A
specially crafted jpeg file can cause a heap overflow resulting in remote
code execution. An attacker can send a file or url to trigger this
vulnerability.
CVE-2017-2870 - An exploitable integer overflow vulnerability exists in the
tiff_image_parse functionality of Gdk-Pixbuf 2.36.6 when compiled with
Clang. A specially crafted tiff file can cause a heap-overflow resulting in
remote code execution. An attacker can send a file or a URL to trigger this
vulnerability.
CVE-2017-6311 - gdk-pixbuf-thumbnailer.c in gdk-pixbuf allows
context-dependent attackers to cause a denial of service (NULL pointer
dereference and application crash) via vectors related to printing an error
message.
The host version now needs the same workaround as we do for the target to
not pull in shared-mime-info.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems github now sometimes provides slightly changed tarballs which
produce a different sha256 hash than before. This commit fixes the
hashes of the packages when sources.buildroot.net does not store a copy
of the tarball matching the current hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install tools into /usr/bin, not /usr/local/bin, since /usr/local/bin
is not in PATH by deafault.
[Peter: set PREFIX to /usr to really install into /usr/bin]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Python3 version to 3.6.2.
Patches dropped:
"Support PGEN_FOR_BUILD and FREEZE_IMPORTLIB_FOR_BUILD"
Rationale: With commit 9d02f562961efd12d3c8317a10916db7f77330cc, code
generation step of building CPython now became explicit (instead of
always performed as a part of 'make' invocation) and more granular. We
no longer need to use Parser/pgen at all and tricking the build system
into using different Programs/_freeze_importlib can be done as a part
of recipe.
Additional info about the build change can be found at
https://bugs.python.org/issue23404
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a hash for the license file while we're at it.
[Peter: use tuxfamily.org URL for annoucement]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7555 - Augeas versions up to and including 1.8.0 are
vulnerable to heap-based buffer overflow due to improper handling of escaped
strings. Attacker could send crafted strings that would cause the
application using augeas to copy past the end of a buffer, leading to a
crash or possible code execution.
[Peter: extend description]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches with renames apply properly with patch >= 2.7, but not with
older patch versions. Since "git format-patch" by default generates
patches with renames, Buildroot developers often don't realize that
their patches will not apply properly on build machines that have
patch < 2.7. In order to prevent such a situation from happening
again, this commit adds some logic in apply-patches.sh to refuse
applying patches that contain renames.
Note that just searching for '^rename' is not sufficient, since the
patch commit message may contain the words "rename from" or "rename to"
as well. Therefore, the grep expression is made as accurate as possible,
checking both.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: spaces instead of tabs (suggested by Yann);
extend commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When using an external toolchain that was built with Buildroot and a
merged /usr, the dynamic linker is actually in /usr/lib.
But the check_glibc macro limits the depth it is looking for the dynamic
linker, and misses it when it is in /usr/lib because it is too deep.
We could fix that in two ways: increase the depth in which we look
for it, or follow symlinks. We choose the second solution.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This bump
54e63e3f9a...303f418e1a
updated the transcoding support already present:
014bb9505e
To avoid these build errors
src/transcoding/codec/codecs/libs/libx26x.c:105:18: fatal error: x264.h: No such file or directory
#include <x264.h>
src/transcoding/codec/codecs/libs/libx26x.c:213:18: fatal error: x265.h: No such file or directory
#include <x265.h>
src/transcoding/codec/codecs/libs/libopus.c:23:31: fatal error: opus/opus_defines.h: No such file or directory
#include <opus/opus_defines.h>
we need to add dependency handling already with this patch and keep the
hard dependency x264 as minimum codec for transcoding but we now need
to enable BR2_PACKAGE_FFMPEG_GPL to enable x264-support also in ffmpeg.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
014bb9505e
extended the already present transcoding support and included vaapi-
accelerated transcoding.
In order to support these new options and their numerous dependencies
we add a new Kconfig option for transcoding support to allow users to
disable transcoding support, because they use tvheadend for recording
or by its internal hts protocol, for example with the kodi-pvr-hts
addon.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Mostly to compile imx-lib (providing libpxp) on i.MX6UL (which have a
PXP hardware unit) and to prevent compilation of imx-lib's modules not
supported on i.MX6UL.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some changes in addition to the version bump:
- The uint32_t patch is now upstream
- Drop --no-glib12 flag as support was removed in 2.0.23
- The host library path patch was refreshed
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: remove uint32_t patch from hash file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-cmake even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
XSA-226: multiple problems with transitive grants (CVE-2017-12135)
XSA-227: x86: PV privilege escalation via map_grant_ref (CVE-2017-12137)
XSA-228: grant_table: Race conditions with maptrack free list handling
(CVE-2017-12136)
XSA-230: grant_table: possibly premature clearing of GTF_writing /
GTF_reading (CVE-2017-12855)
XSA-231: Missing NUMA node parameter verification (CVE-2017-14316)
XSA-232: Missing check for grant table (CVE-2017-14318)
XSA-233: cxenstored: Race in domain cleanup (CVE-2017-14317)
XSA-234: insufficient grant unmapping checks for x86 PV guests
(CVE-2017-14319)
XSA-235: add-to-physmap error paths fail to release lock on ARM
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-pkgconf even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The download location got changed two years ago when the version was bumped
to 0.9.12, but the upstream URL in Config.in wasn't updated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
I'm going to leave current company and
this mail address is going to become invalid.
Signed-off-by: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-cmake will optionally link with openssl for the embedded copy of
libarchive if available, leaking host dependencies and possibly causing
build issues in case of compatibility issues - E.G. the host-cmake version
we have in 2017.02.x doesn't build against openssl-1.1.0+:
https://github.com/libarchive/libarchive/issues/810
The openssl support in libarchive is unlikely to be needed, so explicitly
disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000250 - All versions of the SDP server in BlueZ 5.46 and
earlier are vulnerable to an information disclosure vulnerability which
allows remote attackers to obtain sensitive information from the bluetoothd
process memory. This vulnerability lies in the processing of SDP search
attribute requests.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit be8e32d585 ("netsnmp: configurable MIB modules"),
the list of MIB modules can be selected with a configuration option.
However, there was still an hardcoded list of MIB files to exclude from
the target filesystem.
Since it is complicated to know which MIB files are necessary according
to the configuration, let's install all of them.
Cc: przemyslaw <przemyslaw.wrzos@calyptech.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Added upstream patch to fix build error:
move.o: In function `do_page_up':
move.c:(.text+0x150): undefined reference to `leftedge_for'
move.o: In function `do_page_down':
move.c:(.text+0x20c): undefined reference to `leftedge_for'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There aren't really any changes that matter for the buildroot image,
but the project has been moved over to kernel.org and is now available
in a release tarball, so simplify the .mk file by removing any
autoreconf stuff.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch fixing compilation on the systems without C++ compiler.
Also add licence hashes.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This also moves the source tree to the new official upstream location at
ibm-power-utilities GitHub organisation.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mbimcli and mbim-network are GPLv2+ (COPYING file applies) and
libmbim-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qmicli, qmi-network and qmi-firmware-update are GPLv2+ (COPYING file
applies) and libqmi-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ModemManager and mmcli are GPLv2+ (COPYING file applies) and
libmm-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Force gzip compression level 6 when calculating hash of a downloaded GIT repo.
To make sure the tar->gzip->checksum chain always provides consistent result.`
The script was relying on the default compression level, which must not be
necessarily consistent among different gzip versions. The level 6 is gzip's
current default compression level.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fscryptctl is a low-level tool written in C that handles raw keys and
manages policies for Linux filesystem encryption.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 and kernel to 4.12.12 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Memory references to DI mode objects could incorrectly be created at
offsets that are not supported by instructions l32i/s32i, resulting in
ICE at a stage when access to the object is split into access to its
subwords:
drivers/staging/rtl8188eu/core/rtw_ap.c:445:1:
internal compiler error: in change_address_1, at emit-rtl.c:2126
Fixes: https://lkml.org/lkml/2017/9/10/151
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of integer overflows and DoS issues.
[Peter: explain security impact]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
Add an upstream patch fixing build without python.
Add two more patches (one of them upstream) fixing cross compile of the
python client library.
Enable devinput and uinput unconditionally to suppress non cross compile
compatible host checks.
Set DEVINPUT_HEADER to target header of input events to avoid use of
host header.
Add python3 as optional dependency.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patch applied upstream, switched to cmake-package following
upstream removal of autoconf.
Short summary of changes:
version 1.0.1
- switched from autoconf to cmake
version 1.0.0:
- fixed CVE-2014-8242
- project moved to github
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the SixXS project has ceased its operation on 2017-06-06,
the aiccu utility has been removed.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add optional dependency on libcap, which exists since this version
bump.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
[Thomas: add explicit --with-libcap.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-11610 - The XML-RPC server in supervisor before 3.0.1, 3.1.x
before 3.1.4, 3.2.x before 3.2.4, and 3.3.x before 3.3.3 allows remote
authenticated users to execute arbitrary commands via a crafted XML-RPC
request, related to nested supervisord namespace lookups.
For more details, see
https://github.com/Supervisor/supervisor/issues/964
While we're at it, add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We unfortunately cannot use the upstream patches directly as they are not in
'patch -p1' format, so convert them and include instead.
Fixes:
CVE-2017-0899 - RubyGems version 2.6.12 and earlier is vulnerable to
maliciously crafted gem specifications that include terminal escape
characters. Printing the gem specification would execute terminal escape
sequences.
CVE-2017-0900 - RubyGems version 2.6.12 and earlier is vulnerable to
maliciously crafted gem specifications to cause a denial of service attack
against RubyGems clients who have issued a `query` command.
CVE-2017-0901 - RubyGems version 2.6.12 and earlier fails to validate
specification names, allowing a maliciously crafted gem to potentially
overwrite any file on the filesystem.
CVE-2017-0902 - RubyGems version 2.6.12 and earlier is vulnerable to a DNS
hijacking vulnerability that allows a MITM attacker to force the RubyGems
client to download and install gems from a server that the attacker
controls.
For more details, see
https://www.ruby-lang.org/en/news/2017/08/29/multiple-vulnerabilities-in-rubygems/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bind autoconf scripts look for lmdb.h in /usr/include (even when
cross-compiling). When liblmdb-dev is installed, this causes the
following error:
...
checking for lmdb library... yes
checking for library containing mdb_env_create... no
configure: error: found lmdb include but not library.
Fix this by disabling explicitly lmdb support.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
strace moved to a new homepage as upstream commit 2bba131575878 (Update
homepage URL) indicates.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2016-8687: Stack-based buffer overflow in the safe_fprintf function
in tar/util.c in libarchive 3.2.1 allows remote attackers to cause a
denial of service via a crafted non-printable multibyte character in a
filename.
CVE-2016-8688: The mtree bidder in libarchive 3.2.1 does not keep track
of line sizes when extending the read-ahead, which allows remote
attackers to cause a denial of service (crash) via a crafted file, which
triggers an invalid read in the (1) detect_form or (2) bid_entry
function in libarchive/archive_read_support_format_mtree.c.
CVE-2016-8689: The read_Header function in
archive_read_support_format_7zip.c in libarchive 3.2.1 allows remote
attackers to cause a denial of service (out-of-bounds read) via multiple
EmptyStream attributes in a header in a 7zip archive.
CVE-2016-10209: The archive_wstring_append_from_mbs function in
archive_string.c in libarchive 3.2.2 allows remote attackers to cause a
denial of service (NULL pointer dereference and application crash) via a
crafted archive file.
CVE-2016-10349: The archive_le32dec function in archive_endian.h in
libarchive 3.2.2 allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted file.
CVE-2016-10350: The archive_read_format_cab_read_header function in
archive_read_support_format_cab.c in libarchive 3.2.2 allows remote
attackers to cause a denial of service (heap-based buffer over-read and
application crash) via a crafted file.
CVE-2017-5601: An error in the lha_read_file_header_1() function
(archive_read_support_format_lha.c) in libarchive 3.2.2 allows remote
attackers to trigger an out-of-bounds read memory access and
subsequently cause a crash via a specially crafted archive.
Add upstream patch fixing the following issue:
CVE-2017-14166: libarchive 3.3.2 allows remote attackers to cause a
denial of service (xml_data heap-based buffer over-read and application
crash) via a crafted xar archive, related to the mishandling of empty
strings in the atol8 function in archive_read_support_format_xar.c.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change setup type to setuptools.
Add a patch removing the pytest-runner dependency. The patch was sent
upstream.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Qt package currently fails to build on ARMv8 cores in 32-bit mode
(for example, if you select ARM and then Cortex-A53), because the ARM
atomic operation implementation in Qt checks if we're on ARMv7, then
on ARMv6, and otherwise falls back to an ARMv5 implementation. The
latter uses the swp instruction, which doesn't exist on ARMv8, causing
a build failure.
To solve this, we simply add a patch that uses the ARMv7 atomic
operations for ARMv8-A.
There is no autobuilder reference because we don't have any ARMv8
32-bit configuration in the autobuilders.
Cc: <ivychend@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-12938 - UnRAR before 5.5.7 allows remote attackers to bypass a
directory-traversal protection mechanism via vectors involving a symlink to
the . directory, a symlink to the .. directory, and a regular file.
CVE-2017-12940 - libunrar.a in UnRAR before 5.5.7 has an out-of-bounds read
in the EncodeFileName::Decode call within the Archive::ReadHeader15
function.
CVE-2017-12941 - libunrar.a in UnRAR before 5.5.7 has an out-of-bounds read
in the Unpack::Unpack20 function.
CVE-2017-12942 - libunrar.a in UnRAR before 5.5.7 has a buffer overflow in
the Unpack::LongLZ function.
For more details, see
http://www.openwall.com/lists/oss-security/2017/08/14/3
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-6362: Double-free in gdImagePngPtr()
CVE-2017-7890: Buffer over-read into uninitialized memory
Drop patches no more needed:
0001-gdlib-config.patch: @LIBICONV@ is nowadays correct AC_SUBST'ed by
configure
0002-gd_bmp-fix-build-with-uClibc.patch: upstream uses ceil() since
6913dd3cd2
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to 4.13 kernel and remove all the dts patches as they
are part of upstream now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libqmi library and tools come with several optional features that
may be enabled or disabled during build.
This patch adds support to automatically enable or disable them based
on the presence of the required dependencies for each:
* QMI-over-MBIM is enabled if libmbim is selected.
* udev support in qmi-firmware-update is enabled if libgudev is
selected.
* MM runtime check in qmi-firmware-update is enabled if ModemManager
is selected (but we don't build-depend on it, the runtime check is
done using plain glib2 DBus operations).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps web2py to the latest version R-2.15.4 and bumps
also the python-pydal dependency to the required latest version 17.8.
Starting with version R-2.15.x web2py supports also python 3, so
updating the package to support both versions.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps lcdproc to version 0.5.9, and switches to the new
upstream on github.
The new version also compiles with musl without any patches.
Signed-off-by: Sven Haardiek <sven.haardiek@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream migrated to automake for autotools: the "installlib" target
no longer exist, and we can use the standard "install" target, and
therefore drop the special INSTALL_STAGING_OPTS and
INSTALL_TARGET_OPTS variables.
Add license hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
minnowboard_max-graphical_defconfig has the line "BR_TARGET_GRUB2=y",
but this currently has no effect because BR_TARGET_GRUB2 cannot be
selected without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by
default.
The minnowboard max defconfig was updated to fix this problem, but the
graphical variant was not updated alongside it.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The galileo_defconfig has the line "BR_TARGET_GRUB2=y", but this
currently has no effect because BR_TARGET_GRUB2 cannot be selected
without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by default.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 44b5637ab2 (e2fsprogs: add a patch to link against SEM_INIT libs)
introduced a patch that effectively adds -lpthread to the link command
with libcom_err. Today the only libc with separate libpthread is glibc
that does not support static build. The generated libcom_err.so.2.1
library links with libpthread with or without this patch. Drop this
patch.
Cc: Daniel Mack <daniel@zonque.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c96b8675ea
("support/scripts/check-bin-arch: ignore symbolic links") was bogus,
because it tested ${f}, which is the relative path of the file inside
${TARGET_DIR}, so we end up testing if ${f} on the system is a
symbolic link.
This commit fixes that by testing ${TARGET_DIR}/${f}.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit da32b49f00
("instrumentation: extend packages-file-list.txt with symlinks and
directories"), the packages-file-list.txt also contains symbolic
links. Therefore, check-bin-arch is now also checking symbolic links.
However, symbolic links in $(TARGET_DIR) can have absolute path as
targets, such as:
$ ls -l output/target/sbin/ifdown
lrwxrwxrwx 1 thomas thomas 10 Sep 3 15:55 output/target/sbin/ifdown -> /sbin/ifup
Therefore, we are now potentially checking a host binary, which
obviously makes check-bin-arch fail.
This commit changes check-bin-arch to ignore symbolic links. Indeed,
we have two cases:
- The symbolic link really points to something that will in the
rootfs (such as /sbin/ifup above). In this case, /sbin/ifup will be
checked separately by check-bin-arch.
- The symbolic link doesn't point to something that will be in the
rootfs, and that is not a problem from the perspective of
check-bin-arch, which checks the architecture of target binaries.
Fixes:
http://autobuild.buildroot.net/results/16d384a0183d477646ac7692feb65f00dde7d068/
(vim)
http://autobuild.buildroot.net/results/50429c0f63a8befff9e20899327b9a8d754d99be/
(ifupdown)
http://autobuild.buildroot.net/results/1db65973e782bfa61abcbccd3501bfd235f77288/
(gawk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to https download for firewall compatibility and security.
As upstream now defaults to 'gpg' for the main binary name, keep the
'gpg2' name as in previous releases, to avoid conflict with the gnupg
package.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
curlbuild.h was removed in recent versinos of curl, backporting a
patch from mainline to fix it until a newer version of sysdig is
released.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide the path to HOST_DIR for libxml, libxslt and libiconv like for
the target variant to avoid a build issue on host where /bin is a
symlink to /usr/bin.
Indeed, the configure script use a custom m4 macro XSTAR_LIB_CHECK to
find xml2-config:
XSTAR_LIB_CHECK([LIBXML], [xml2-config])
This macro come from a local m4 file m4/xstar-check-libs.m4 where it
use:
AC_PATH_PROG(LIBXXX()_CONFIG, xxx_config(),
[], [$LIBXXX()_PREFIX/bin$PATH_SEPARATOR$PATH]
Since no prefix seems to be defined by $LIBXXX()_PREFIX, AC_PATH_PROG
look by itself at /bin/ for xml2-config. So the PATH variable set
by Buildroot containing HOST_DIR/bin is ignored.
The wrong xml2-config is used during the build and the build fail
when no xml2 headers are installed on the host.
Fixes:
src/xml_C14N.c:12:31: fatal error : libxml/xmlversion.h : No such file or directory
#include <libxml/xmlversion.h>
^
In file included from src/trans.c:4:0:
src/trans.h:32:30: fatal error : libxml/xmlmemory.h : No such file or directory
#include <libxml/xmlmemory.h>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: remove french messages from the commit log, drop
--with-libiconv-prefix option, since we don't have a libiconv
dependency for the host.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ts4900 defconfig is upstream in Linux since v4.9:
a2f1145 ARM: dts: TS-4900: add basic device tree
Bump kernel version to v4.12 and use the upstreamed defconfig
imx_v6_v7.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change extends to the login utilities the current policy of having
a selection item in the configuration menu for each utility that has an
--enable/--disable knob in the "configure" script:
- add selection items for login, runuser, su and sulogin (there was
already an item for "last")
- move "login utilities" to Config.in.legacy
- make "login utilities" select last, login, runuser, su and sulogin
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel help-text states, "The ext4 filesystem requires that this feature
be enabled <...> otherwise, it will refuse to mount in the read-write
mode any filesystems that use the huge_file feature, which is enabled by
default by mke2fs.ext4."
If the rootfs is to be (re)mounted rw at boot, this must be set for the
system to successfully come up.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building 3.1.9 still fails after removing patch 0002:
volume.c:383:26: error: 'ldap_config_valid' undeclared (first use in this function)
if (!ldap_config_valid || vol->v_flags & AFPVOL_NONETIDS)
Bumping to 3.1.11 solves the problem.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 72e89edfcb. Due to
some change in fontconfig, it tries to re-generate a file using
gperf. Adding a dependency on host-gperf would solve the problem, but
really this is an upstream bug that should be reported and fixed
rather than worked around by adding the host-gperf dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61c4c63 (package/lzo: switch to cmake), building lzo has switched
from autotools to cmake. In the conversion, we've lost the build of the
shared library, because the cmake-based buildsystem of lzo explcitly
disables it by default.
Restore the shared library build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the recent NLS rework, BR2_ENABLE_NLS doesn't imply the absense of --disable-nls, so
configure may fail with:
configure: error: "The gtk client cannot be built without nls support. Try adding either --enable-nls or --without-gtk"
So adjust the dependencies to use BR2_SYSTEM_ENABLE_NLS instead.
As mentioned by Arnout, an alternative solution could be to explicitly pass
--enable-nls as the stub functions are now available everywhere - But I went
with the dependency for consistency reasons.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following configure issue:
checking for GTK... no
configure: error: Package requirements (gtk+-3.0 >= 3.4.0
glib-2.0 >= 2.32.0
gio-2.0 >= 2.26.0,
gmodule-2.0 >= 2.32.0
gthread-2.0 >= 2.32.0) were not met:
libgtk2 support was dropped in commit cdd71c642724 ((trunk gtk) #4970 remove
deprecated GTK+ API calls, raise GTK+ dependency to 3.2) which was part of
transmission-2.61.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are the changes implemented:
* Remove dbus-glib as a dependency, as it isn't required since
ModemManager 1.0, which is based on libglib2's GDBus
implementation.
* Remove udev as a dependency, as the ModemManager build only needs
the libgudev package.
* Explicitly set libglib2 as dependency, which currently was being
implicitly included by libgudev. The next major ModemManager
release will have udev/libgudev as optional packages, while
libglib2 is definitely not going to be ever optional.
* Add a comment explaining that dbus is only a runtime dependency.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
- properly handle the NLS cases, by adding two patches
- use sha256 locally calculated hash for the tarball, add hash for
the license file
- fix the license information: it's GPL-2.0 licensed, and the license
file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.
In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tweak 0003-Sanitize-the-installation-process.patch for 2.2.4
Tweak 0004-Remove-PIE-flags-from-the-build.patch for 2.2.4
Remove 0005-Fix-static-linking-with-GnuTLS.patch as it was merged upstream
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 fails to configure when BR2_SSP_ALL is enabled, with the following
configure error:
checking whether -fno-asynchronous-unwind-tables works... yes
checking whether -fno-unwind-tables works... yes
checking for target linking format... unknown
configure: error: no suitable link format found
This can be worked around by enforcing -fno-stack-protector in the
package CFLAGS in a way that overrides the SSP flag, as is already done
for the valgrind package.
Fixes bug #10261.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reported-by: Dr I J Ormshaw <ian_ormshaw@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-0379: Mitigate a local side-channel attack on Curve25519
dubbed "May the Fourth be With You".
As we are close to release, don't update to the latest 1.8.1 version,
but to a maintenance release from the 1.7 branch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mitigate a flush+reload side-channel attack on RSA secret keys
dubbed "Sliding right into disaster". For details see
<https://eprint.iacr.org/2017/627>. [CVE-2017-7526]
Switch to https site for better firewall compatibility and security.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
clock_gettime is defined locally, and calls pth_int_time, which
in turn calls clock_gettime.
The USB backend shouldn't overrule clock_gettime in the first place.
This patch fixes this endless recursion by removing the local defition.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1b974425 (MIPS: add support for M6201 cores) explained that the
new core was not supported by upstream gcc, and as of gcc-8-trunk
that's still the case.
Ditto for 3cfbeb83 (MIPS: add support for P6600 cores).
This means that we currently allow to build an internal tolchain for
those cores, yet we have no suitable gcc version.
Disable the internal backend in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-vim is needed to provide the xxd tool, otherwise the build fails
with:
checking for xxd... no
configure: error: "xxd is required (provided by vim package)"
This isn't noticed by the autobuilders, presumably because all of them
have vim installed locally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vim contains a tool called xxd, which is needed by mediastreamer on
the host as part of its build process. Therefore, this commit
introduces a host variant for the vim package, that will be used by
mediastreamer.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f837251785 ("package/libv4l:
allow build of v4l2 utilities on noMMU platforms"), Hugues Fruchet
added a bunch of patches to libv4l in order to allow the v4l utilities
to be built on noMMU platforms.
However, as part of those patches, he entirely disabled the build of
libv4l in static linking configurations, because libv4l uses
dlopen(). Unfortunately, this breaks the build of applications like
mediastreamer in static linking configurations, and generally makes
our libv4l packages a little bit awkward: you can enable it, but it
doesn't install anything (in static linking configurations).
A closer look shows that dlopen() is only used by libv4l for plugin
support, and libv4l only provides one single plugin, and its build is
already conditional. Therefore, this commit adds yet another patch to
libv4l, which re-enables the build of libv4l, but disables the
plugin-related logic when plugin support is disabled (and it was
already automatically disabled in static linking configurations).
While at it, we update the comment in libv4l.mk that lists the patches
that makes autoreconf necessary.
Fixes the build of mediastreamer:
http://autobuild.buildroot.net/results/af091cfd0508df9395778cdc796f77e95c168410/
Cc: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is much smaller the the previous one and will unlikely cause
a conflict with some forthcoming 2.30.x release.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit will enable tpuarts in eibd as well. tpuarts is as
important as FT1.2 support, which is already enabled by default.
This causes a 8 KB increase of the installed size in /usr/bin (728 KB
instead of 720 KB for /usr/bin), so not enough to justify a separate
configuration option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to cc-tool that fixes the boost.m4 logic used
to detect the linker rpath option so that it works properly with
static linking and additional libraries passed in LIBS.
This is the second step to fix static linking of cc-tool on
architectures like SPARC that need to link against libatomic:
http://autobuild.buildroot.net/results/ed9f2524d0ccef318ff1bc99e5dea980111de989/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like -lpthread was passed in LIBS, -latomic should also be passed
in LIBS. In order for this to work, we however need to first fix
cc-tool's Makefile.am so that it does not overwrite LIBS.
This is the first part of fixing the build of cc-tool in a static
linking scenario on SPARC, i.e to fix:
http://autobuild.buildroot.net/results/ed9f2524d0ccef318ff1bc99e5dea980111de989/
The patch has been merged upstream, in
553f9c6016.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added all hashes provided by upstream.
Removed dependency to mtdev after:
167bbb6d10
libdrm is now a hard dependency:
b030897b38
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: drop "select BR2_PACKAGE_LIBDRM" from sub-option, now that it
is selected by the main option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Release notes: https://mariadb.com/kb/en/mariadb-10126-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10126-changelog/
Fixes the following security vulnerabilities:
CVE-2017-3636 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.56 and earlier and 5.6.36 and earlier. Easily exploitable vulnerability
allows low privileged attacker with logon to the infrastructure where MySQL
Server executes to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized update, insert or delete access to
some of MySQL Server accessible data as well as unauthorized read access to
a subset of MySQL Server accessible data and unauthorized ability to cause
a partial denial of service (partial DOS) of MySQL Server.
CVE-2017-3641 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DML). Supported versions that are affected are
5.5.56 and earlier, 5.6.36 and earlier and 5.7.18 and earlier. Easily
exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful
attacks of this vulnerability can result in unauthorized ability to cause
a hang or frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2017-3653 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.56 and earlier, 5.6.36 and earlier and 5.7.18 and earlier. Difficult
to exploit vulnerability allows low privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized update, insert or delete
access to some of MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a config option to install the ql2xxx firmware binaries for QLogic
Fibre Channel adapters.
Since this doesn't quite fit under the existing categories in Config.in,
include it under a new category named "Fibre Channel Adapter Firmware".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Among other small fixes, the new version fixes crashes when running in
X11 without GLX (i.e. using EGL). Additionally, the changes from patch
"0002-Make-EGL-support-optional.patch" were committed upstream, and the
file can be dropped.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches continue to apply with no changes. 7.2.0 is a bugfix
release of the 7.x branch.
The only change that is not a simple bump is that the 7.2.0 tarball is
now available xz-compressed instead of bz2-compressed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind configure script explicitly links libunwind against
libgcc_s. libgcc_s is only guaranteed to be available for toolchains
that supports dynamic linking: pure static linking toolchains only
have libgcc.a, not libgcc_s.so.
Therefore, let's make libunwind unavailable on toolchains that lack
dynamic linking support. We could potentially support linking with
libgcc, but switching to libgcc_s was done upstream because libgcc was
lacking some symbols on ARM
(https://lists.nongnu.org/archive/html/libunwind-devel/2014-06/msg00024.html). Even
though recent gcc versions seem to provide such symbols in libgcc.a,
having libunwind available on static linking configurations is not a
useful enough use-case to do the necessary research to find when this
issue was fixed in gcc.
Since libunwind is not used as a mandatory dependency in any package,
adding this !BR2_STATIC_LIBS dependency is trivial and nicely avoids
the problematic situation.
This fixes two different autobuilder failures:
- Gstreamer 1.x programs failing to link, because libunwind links
against libgcc_s that isn't available (static linking
configuration):
http://autobuild.buildroot.net/results/9d4fbf7167e9afce0eef5c9e0cfd42c966ecba36/
- Gmrender-resurrect, which fails to link, because GStreamer 1.x uses
some libunwind functionality, but does not take into account the
libunwind dependency in its .pc files (static linking
configuration):
http://autobuild.buildroot.net/results/0a3a2485c187a000482c178f1e9c64dd716a858f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current commit is from Sep 23, 2016. Update to latest commit from
Jul 11, 2017 to add support for i.MX6ULL processors.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is similar to 350941e31d
("python: remove target Python packages from PYTHONPATH") but for
python3.
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/
inside the PYTHON3_PATH variable, which gets used to define
PYTHONPATH, passed to the host Python interpreter when
building/installing target packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
This change fixes the following build failures:
http://autobuild.buildroot.net/results/9005b89407e46b537a54cac6cc0c69dcac4dc5ea/
(python-cryptography)
http://autobuild.buildroot.net/results/395682d33d02fdcaa39d3c0326355bd9ea3d6feb/
(python-pynacl)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports three patches that are already upstream in
kvmtool fixing build warnings with musl. Those are not strictly needed
for the build to succeed, they just reduce the amount of warning
noise.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In Linux 4.12, the header <asm/msr-index.h> has been removed from the
set of headers exported to userspace. Therefore, it cannot be used by
kvmtool anymore. This commit takes the simple approach of duplicating
inside kvmtool the MSR_* definitions that were used from this
<asm/msr-index.h> header.
This fixes:
x86/kvm-cpu.c:7:27: fatal error: asm/msr-index.h: No such file or directory
#include <asm/msr-index.h>
Which is the second part of:
http://autobuild.buildroot.net/results/4459a909e735343d1cf768d30466bc3c57eca19e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 392b0a26f5 (toolchain-external: default BR2_TOOLCHAIN_EXTERNAL_PATH
to empty), calling 'make clean' or similar can yield a spurious stderr
message:
dirname: missing operand
Try 'dirname --help' for more information.
Which is definitely baffling and unsettling...
It turns out that it is pretty trivial to reproduce, and this defconfig
is just enough:
$ cat my-defconfig
BR2_TOOLCHAIN_EXTERNAL=y
$ make BR2_DEFCONFIG=$(pwd)/my-defconfig defconfig
$ make clean
dirname: missing operand
Try 'dirname --help' for more information.
[--snip--]
This is because the cross-compiler is not found in the PATH (and for
good reasons, I don't have it in the PATH, not even at all).
So, when the cross-compiler is not found in the path, we simply
continue as if all was good, and postpone the check to much later,
when we try to copy the toolchain libs...
So, use a make construct rather than calling to the shell: $(dir ...)
does not whine if passed nothing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Toradex V2.7 SDK, U-Boot image has changed from u-boot.imx to
SPL + u-boot.img.
Also fix U-Boot build error with GCC6.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2c8de6c4 (gcc 4.9.1: add patch for PR60102) removed the SPE
condition becasue of said PR, but forgot to remove the associated
comment, which has been tagging along all this time...
Remove it, it is no longer valid and causes confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The VC4 GPU does not support full GL, it only provides EGL.
Currently, it is possible to build the VC4 backend without EGL support,
but that does not make sense in the slighest.
So, forcibly enable EGL with VC4, like is done for etnaviv and virgl.
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a patch cherry-picked from libepoxy 1.4.2, which adds missing
NULL-pointer checks and avoids segmentation faults when using libepoxy
under X11, when the server does not have the GLX extension, or it is
disabled -- and applications can still use EGL.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we use the cross-compiler to build syslinux with a recent binutils
version, it fails with:
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld -Bsymbolic -pie -E --hash-style=gnu -T
/builds/arnout/buildroot/output/build/syslinux-6.03/core/i386/syslinux.ld -M -o ldlinux.elf ldlinux.o \
--start-group libcom32.a --whole-archive /builds/arnout/buildroot/output/build/syslinux-6.03/bios/com32/lib/libcom32core.a libldlinux.a --end-group -N
--no-omagic \
> ldlinux.map
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld: ldlinux.elf: Not enough room for program headers, try linking with -N
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld: final link failed: Bad value
/builds/arnout/buildroot/output/build/syslinux-6.03/core/Makefile:167: recipe for target 'ldlinux.elf' failed
Backport an upstream patch that reorganises the i386 bios build by
removing some symbols and making others hidden. To simplify the
backport, an additional patch that also touches the link script is
also included - it anyway looks like that patch could be relevant as
well.
Partially fixes: https://gitlab.com/arnout/buildroot/-/jobs/28979377
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also the last two are regenerated, their context has changed due to
the patches that have been removed earlier.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of libspatialindex on the Microblaze
architecture by working around a gcc bug, by passing -O0 as the
optimization level.
A patch to configure.ac is needed to not have -O2 be forced by the
libspatialindex build system, and therefore AUTORECONF=YES is now
needed.
Fixes:
http://autobuild.buildroot.net/results/bbba2a2c97dbec21340c7fd07162a316a411cba4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In case we're using an initrd, we create an empty "root" directory that
will contain only the bootloader stuff, not the actual root filesystem,
because it is in an initrd (standalone or initramfs).
We have to ensure that the directory is empty before assembling the
filesystem (to avoid any file lingering from a previous run, like the
sequence "make; make"). So we first remove it before we create it, so
that on each build (especially not-from-scratch builds) we get the exact
expected content without any leftover.
However, the macro responsible for that, although defined since 7080eef9,
was never called.
Fix that by registering it as a pre-gen hook.
Note: the directory need not be created, as there are quite a few
"install -D" commands that ensure it is created. Yet, we prefer to
create it explicitly to avoid any confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Although the issue can very well occur with low-paralle builds, or even
with non-parallel builds, the conditions are so strict that the ocasion
it breaks is extremely rare, to the point where a failure would go
unnoticed.
Fixes#10141.
Reported-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
elf2flt contains a program called ld-elf2flt, which gets installed as
a replacement for ld, with ld renamed to ld.real. This program
therefore calls ld.real internally.
The logic to find ld.real worked fine for:
- bin/TARGET_ALIAS-ld
- TARGET_ALIAS/bin/ld
However, it failed badly if bin/SIMPLER_TARGET_ALIAS-ld is used, as
symlink to bin/TARGET_ALIAS-ld. For example:
$ ./output/host/bin/arm-buildroot-uclinux-uclibcgnueabi-ld
/home/thomas/buildroot/buildroot/output/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: no input files
$ ./output/host/bin/arm-linux-ld
arm-linux-ld (ld-elf2flt): error trying to exec '/home/thomas/buildroot/buildroot/output/host/bin/ld.real': execvp: No such file or directory
$ ./output/host/arm-buildroot-uclinux-uclibcgnueabi/bin/ld
/home/thomas/buildroot/buildroot/output/host/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: no input files
This commit fixes that by adding a patch that adjusts the ld-elf2flt
logic to properly cope with this situation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes serious usability issues (Debian changelog):
* Fixed whois referrals for .com, .net, .jobs, .bz, .cc and .tv,
broken by an ICANN-mandated output change:
https://www.icann.org/resources/pages/rdds-labeling-policy-2017-02-01-en
Use snapshot.debian.org for the .dsc reference, since files tend to
disappear from the official Debian ftp site over time.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Recent glibc have deprecated the implicit include of sys/sysmacros.h
from sys/types.h. That means that the macros major and minor are no
longer defined unless this header is included.
This problem was observed for host-e2fsprogs when building on a host
with recent glibc.
Add an upstream patch that includes sys/sysmacros.h when needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Dagg Stompler <daggs@gmx.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.
For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
- add upstream references for the Linux kernel patches
- fix typoes in readme.txt
- remove audio-related packages in defconfig
- regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The DEVELOPERS file lists file patterns, but the get-developers script
only supports getting packages and CPU architectures. Some files are
neither of those, e.g. defconfigs, support files, package infras, ...
Add a '-f' option that allows to give a list of files for which to get
the developer(s).
Note that the DEVELOPERS file contains directories as well as files,
and the directories are not expanded into individual files. Therefore,
we have to use f.startswith(devfile) to match a directory. This assumes
that the directory name ends with /, otherwise 'package/python' would
also match 'package/python-foo'. Since we make sure that directories do
end with / in the DEVELOPERS file, and since false positives are not
much of an issue in this case, this isn't a problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unbreak failing defconfig.
Resulting kernel and rootfs booted on ci20 device.
While at it, drop the useless BR2_TARGET_UBOOT_VERSION variable, this
variable is a hidden variable, so it is useless to mention it in a
defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: drop BR2_TARGET_UBOOT_VERSION.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to the sysvinit package that fixes various
build issues against musl due to missing header includes.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest version of sysdig introduced a variable for the kernel module
name. This patch updates that variable into Makefile.in.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-common implies
that it is common to all skeletons, yet it does not apply to
skeleton-custom. It is only common to the skeleton-init-* packages, so
name it the same way.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-sysv is relatively
clear, skeleton-common and skeleton-none are less clear on their
relationship to BR2_INIT_*. So rename skeleton-sysv to conform to a
clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-systemd is
relatively clear, skeleton-common and skeleton-none are less clear on
their relationship to BR2_INIT_*. So rename skeleton-systemd to conform
to clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-none implies no
skeleton at all, not a base skeleton with no init-specific files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This release contains only two real changes to fix two bugs. One is
only relevant for Windows; the other one fixes handling of empty
comment lines.
libconfuse is used by genimage, and we have one defconfig,
linksprite_pcduino, that has empty comment lines in its genimage.cfg.
Thus, it fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/27873642
While we're at it, also change the upstream URL in Config.in to github.
The old URL on nongnu was just a download directory and didn't have
anything newer than 2010, while github has a nice README.md.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Host variant is needed to generate long description
for python-automat package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install the libraries to staging to be usable by other packages.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds libb64, a library of ANSI C routines for fast
encoding/decoding data into and from a base64-encoded format.
The package contains a static library, headers, and an executable.
The latter, however, requires C++ and offers no advantages over busybox
or coreutils base64, so it is not installed. Therefore, nothing is
installed to target.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout:
- properly wrap Config.in
- move from Crypto to Other menu
- don't install to target
- don't make headers executable
- don't add -D to install with multiple source files
- extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit c69088b8c3, which is
no longer needed now that alsa-lib has been fixed properly.
Indeed, this commit was made because alsa-utils failed to build with:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_htimestamp':
pcm_dmix.c:(.text+0x5c0): warning:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data.rel+0x4): undefined reference to `_snd_module_rawmidi_virt'
collect2: error: ld returned 1 exit status
Which is exactly the problem that we fixed in alsa-lib by making sure
that rawmidi_symbols.c doesn't reference symbols from rawmidi_virt.c
when SEQ support is not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a patch to alsa-lib that fixes an incorrect code
dependency: some code built when MIDI support is enabled is
unconditionally referencing code that is built when SEQ support is
enabled, both options being independent.
This causes build failures such as:
/home/buildroot/buildroot-test/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_sync_ptr':
pcm_dmix.c:(.text+0x83c): warning:
/home/buildroot/buildroot-test/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data+0x4): undefined reference to `_snd_module_rawmidi_virt'
Fixes:
http://autobuild.buildroot.net/results/5964e7028c31a8f75b38a27270410f0b3c5c8422/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add upstream link to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The beaglebone_qt5_defconfig uses an older kernel version which does not
provide a device tree for the beagle bone green.
post-image.sh now selects genimage_linux41.cfg if am335x-bonegreen.dtb is
not build and genimage.cfg otherwise.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump to 7.55.0, libcurl fails to build on a number of
uncommon architectures (ARC, OpenRISC, etc.). This is due to upstream
commit 73a2fcea0b4adea6ba342cd7ed1149782c214ae3 ("includes: remove
curl/curlbuild.h and curl/curlrules.h"), which makes libcurl rely on
more architecture-specific related defines in include/curl/system.h.
This commit therefore adds a patch that fixes the 32-bit vs. 64-bit
detection for all architecture, using gcc's __SIZEOF_LONG__
definition. It has been tested successfully with test-pkg on all 47
toolchain configurations.
Fixes:
http://autobuild.buildroot.net/results/bf26c08cf3267214278674472f931603f69951ae/
(and many similar issues)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cleanup the libcgi package,
by using https://github.com/rafaelsteil/libcgi as an upstream.
Remove old patch and use cmake to build new version.
Signed-off-by: Joe Lin <xlcwu.taiwan@gmail.com>
[Mario:
- Use github URL in Config.in
- Use upstream sha256 hash]
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
[Arnout:
- Add reference to upstream hash file
- Remove unneeded LIBCGI_SUPPORTS_IN_SOURCE_BUILD = NO]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps to mono 5.0.1.1 and updates the unit tests patch
accordingly.
The latest version of mono carries a bit of changes in the monolite
package: the version string changes and from now on, monolite should
be installed in a subdirectory with the exact version string as a name.
Therefore, mono and monolite are bumped in a single commit.
Patch 0004, although applied in upstream master, is not yet in this
(stable) release.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout: squashed the patches, removed /usr part from HOST_DIR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The linux 4.1 kernel does not compile with gcc 6.x.
The compiler version is now fixed to 5.x until a new kernel is used.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the comment that "valgrind needs shared libs" is not hidden
when the architecture dependencies are not met, which can confuse some
users (as recently seen on IRC).
Fix that by introducing the traditional _ARCH_SUPPORTS option, and have
the comment and the symbol depend on that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Brandon Maier <brandon.maier@rockwellcollins.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed--by: Pedro Ribeiro <pedrib@gmail.com>
Tested-by: Pedro Ribeiro <pedrib@gmail.com>
[Arnout: put _ARCH_SUPPORTS at the top of the file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
glob: do not parse after a strtoul() overflow range (CVE-2017-1000101)
tftp: reject file name lengths that don't fit (CVE-2017-1000100)
file: output the correct buffer to the user (CVE-2017-1000099)
Switch to .tar.xz to save bandwidth.
Add reference to tarball signature.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with 4.12-rc1, tarballs are generated by cgit directly from
Linus's tree. This also implies that no .tar.xz can be used for them.
This method also applies to older release candidates.
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
[Arnout: added comment in the code]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When Lua is linked with additional libraries, these libraries should go
into the pkg-config file as well.
Otherwise, linking swupdate with the lua library fails:
```
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlopen'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlclose'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlerror'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlsym'
```
Fixes http://autobuild.buildroot.net/results/1c3/1c349cc5904868e4def292b9fbfa164828e46156
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This solves build failures caused by WebKit trying to include X11 headers
when support for X11 is disabled in Mesa3D. A common situation is when
configuring both GTK+ and WebKitGTK+ only with Wayland support.
Once the fix for https://bugs.webkit.org/show_bug.cgi?id=175125 makes it
into a release, the patch can be dropped.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds a patch to gdb 7.12 and gdb 8.x, which fixes the build on
noMMU platforms. It is not needed for older versions of gdb, since
it's related to the switch of gdb to C++ in the 7.12 release.
Fixes:
../nat/linux-ptrace.c: In function 'int linux_fork_to_function(gdb_byte*, int (*)(void*))':
../nat/linux-ptrace.c:273:29: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
child_stack = xmalloc (STACK_SIZE * 4);
The patch has already been merged upstream, as of commit
ffce45d2243e5f52f411e314fc4e1a69f431a81f, and will therefore be part
of future gdb releases.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
/tmp/output/build/glibc-2.25/build/libc_pic.a(dl-error.os): In function `__GI__dl_signal_error':
dl-error.c:(.text+0x0): multiple definition of `_dl_signal_error'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x134d8): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(dl-error.os): In function `__GI__dl_catch_error':
dl-error.c:(.text+0x190): multiple definition of `_dl_catch_error'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x136fc): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(init-first.os):(.data+0x0): multiple definition of `__libc_multiple_libcs'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.bss+0x6c): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(_itoa.os): In function `_itoa':
_itoa.c:(.text+0xd4): multiple definition of `_itoa'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x133c8): first defined here
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a parameter to run-tests to act as a multiplier for all timeouts of
emulator.
It can be used to avoid sporadic failures on slow host machines as well
in elastic runners on the cloud.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: rename multiplier to timeout_multiplier everywhere]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed 0003-Use-gnu-11-standard-to-prevent-errors-on-PPC.patch, since
stella now uses -std=c++14 that builds fine when using PPC altivec
vectorization.
Removed 0004-gcc7.patch, backported from upstream.
Update toolchain dependencies to gcc 4.9 since codebase now uses C++14 features.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Arnout: also remove 0004-gcc7.patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switched to github helper because upstream does not provide the tarball
anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
By default, mksquashfs uses all the CPUs available, like us with
BR2_JLEVEL=0.
However, by setting BR21_JLEVEL to non-zero, a user volutarily limits
the number of jobbs allowed to run concurrently (for various reasons,
like this is not a priority task on the machine; or like the
autobuilders, to spread the load accross multiple runs without
overloading the machine).
So, propagate tthe parallelisn settings down to mksquashfs, to repect
the user's will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Tested-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc 7 with -Os (optimize for size) takes the liberty to remove the code
of inline functions entirely - which is indeed allowed according to the
C99 standard, cfr. this [1] very complete StackOverflow answer. This
leads to undefined function references at link time.
The proper approach is to patch the code to use 'static inline'
instead. However, for various reasons such a patch is not entirely
trivial, and upstream has not moved since 7 years, so instead take the
simpler approach of restoring the gcc original inline behaviour with
-fgnu89-inline to fix this issue.
Fixes http://autobuild.buildroot.org/results/d72/d72a7e9775a10bc884b9953dd2eba3ad32100cca
[1] https://stackoverflow.com/questions/6312597/is-inline-without-static-or-extern-ever-useful-in-c99
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This partially reverts commit cf6d321e9d.
The underlying reason for doing the checks is to ensure that a
merged-usr setting is properly enforced, even for custom skeletons.
Before that patch, a custom skeleton where both /bin and /usr/bin were
missing was accepted; but then the first package that intalled something
in /bin would create it as a directory, thus breaking the merged-usr
situation. Ditto sbin and lib, of course.
cf6d321 was created to detect that situation, and the fix was to require
that both directories do exist in the custom skeleton, so that we new
the check for consistency were OK, in all cases.
However, that broke existing skeletons which where missing both
directories, and some people are shinning about it...
The crux of the problem is that Buildroot should be responsible for
creating the directories or the symliks when they are missing, and only
fail if the existing ones are incorrect, but not impose the burden on
the user.
A situation where the problem arises is when a skeleton is shared
between various builds, some using a merged-usr while other do not.
We fix that by reverting the offending changes change, back to the
previous behaviour. We keep the stderr redirection in stat calls, and
the variable renaming.
A proper fix to create the missing directories can be added later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gdb 7.12+ is compiled and linked with C++, therefore the thread_db
headers need to use extern "C", to be usable for C++ code.
Fixes:
Issue when building gdbserver for m68k-coldfire:
thread-db.o: In function `thread_db_init()':
thread-db.c:(.text+0x5b6): undefined reference to `td_ta_new(ps_prochandle*, td_thragent**)'
thread-db.c:(.text+0x61e): undefined reference to `td_thr_get_info(td_thrhandle const*, td_thrinfo*)'
thread-db.c:(.text+0x632): undefined reference to `td_symbol_list()'
...
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This change is fixing the bug reported in [1].
Cmake may run pkg-config to find the dependencies when configuring a
package. Because of the value of PATH, and it will use the Buildroot's
pkg-config wrapper, which, by default, is configured (via some
environment variables) to find the target dependencies.
When configuring a host package using cmake, to prevent cmake from
wrongly solving dependencies from the target tree (when the
*-config.cmake files are using pkg-config) instead of looking for them
in the Buildroot's host tree or in the host system itself, we need to
set the environment variables altering the pkg-config behavior in the
cmake configure environment.
So, this change is fixing the cmake host-packages configuration step,
by properly setting the pkg-config environment variables to their values
for finding host dependencies.
Before this patch:
make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
[...]
>>> host-mariadb 10.1.25 Configuring
(mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib"
-DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DWITH_SSL=bundled )
-- Running cmake version 3.8.2
[...]
-- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
[...]
-- Found LibXml2: /opt/br/abo/cmake-host-find-root-path/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libxml2.so (found version "2.9.4")
[...]
0
After this patch is applied:
make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
[...]
>>> host-mariadb 10.1.25 Configuring
(mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" PKG_CONFIG="/opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_LIBDIR="/opt/br/abo/cmake-host-find-root-path/host/lib/pkgconfig:/opt/br/abo/cmake-host-find-root-path/host/share/pkgconfig" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-roo
t-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib" -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DWITH_SSL=bundled )
-- Running cmake version 3.8.2
[...]
-- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
[...]
-- Found LibXml2: /usr/lib/libxml2.so (found version "2.9.4")
[...]
0
[1] http://lists.busybox.net/pipermail/buildroot/2017-August/199776.html
Reported-by: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 0e2ee0e6e8 (package.snappy: fix static builds with threads)
added LIBS=-pthread to configure options to fix static build with
threads on some architectures. This works for autotools packages. Then,
commit d26282b3aa (package/snappy: bump version, switch to cmake)
switched to cmake that does not understand the 'LIBS' parameter.
As pointed out by Thomas[1] the special handling of libpthread for
static builds is not needed anymore: it was needed only to build the
tests, and these are no longer built. Note that packages that link
statically with snappy will still need to link with -pthread. Only
two in-tree packages currently depend on snappy: lua-csnappy depends
on !BR2_STATIC_LIBS and leveldb adds -pthread from its build system.
Tested with the following musl & uclibc defconfigs which also fix build
errors:
http://autobuild.buildroot.net/results/39f/39f9fc4300ddca19e8a533765b46838003752000/http://autobuild.buildroot.net/results/886/8860b9259f7a3aecb2ddbfa787be048072bd347b/
[1] http://lists.busybox.net/pipermail/buildroot/2017-July/199549.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Baruch: improved commit message]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: improved commit message more, based on Yann's input]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes the following build issues:
In file included from ../sysdeps/x86_64/multiarch/varshift.c:19:0,
from ../sysdeps/i386/i686/multiarch/varshift.c:1:
../sysdeps/x86_64/multiarch/varshift.h: In function '__m128i_shift_right':
../sysdeps/x86_64/multiarch/varshift.h:26:1: error: SSE vector return without SSE enabled changes the ABI [-Werror=psabi]
{
[...]
.../lib/gcc/i686-buildroot-linux-gnu/7.1.0/include/tmmintrin.h:136:1: error: inlining failed in call to always_inline '_mm_shuffle_epi8': target specific option mismatch
The patch has been taken from glibc's patchwork at
https://patchwork.sourceware.org/patch/21003/.
Fixes bug #10156.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Versions older than Linux v3.7 do not support the aarch64 architecture
so disable them, for reference see https://kernelnewbies.org/Linux_3.7
Without this patch these defconfigs fail to build
BR2_aarch64=y
BR2_KERNEL_HEADERS_3_2=y
BR2_aarch64=y
BR2_KERNEL_HEADERS_3_4=y
with error messages like this:
make[1]: Entering directory '/home/buildroot/br5_next/output/build/linux-headers-3.2.89'
Makefile:567: /home/buildroot/br5_next/output/build/linux-headers-3.2.89/arch/arm64/Makefile: No such file or directory
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes '__multi3' issue when building the kernel.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With binutils 2.29 a runtime error is seen:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
Backport upstream patch to fix the issue.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We don't add a full stop at the end of the prompt text.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes [1]:
make[1]: Entering directory '.../build/qt5base-5.9.1/examples/opengl'
cd hellowindow/ && ( test -e Makefile || .../build/qt5base-5.9.1/bin/qmake -o Makefile .../build/qt5base-5.9.1/examples/opengl/hellowindow/hellowindow.pro ) && make -f Makefile
make[2]: Entering directory '.../build/qt5base-5.9.1/examples/opengl/hellowindow'
.../host/bin/sparc-linux-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=.../host/sparc-buildroot-linux-uclibc/sysroot -O2 -O3 -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I../../../include/QtGui/5.9.1 -I../../../include/QtGui/5.9.1/QtGui -I../../../include -I../../../include/QtGui -I../../../include/QtCore/5.9.1 -I../../../include/QtCore/5.9.1/QtCore -I../../../include/QtCore -I.moc -I../../../mkspecs/devices/linux-buildroot-g++ -o .obj/hellowindow.o hellowindow.cpp
In file included from hellowindow.cpp:51:0:
hellowindow.h:96:5: error: ‘QOpenGLShaderProgram’ does not name a type
QOpenGLShaderProgram *m_program;
^~~~~~~~~~~~~~~~~~~~
hellowindow.h:97:5: error: ‘QOpenGLBuffer’ does not name a type
QOpenGLBuffer m_vbo;
^~~~~~~~~~~~~
hellowindow.cpp: In constructor ‘Renderer::Renderer(const QSurfaceFormat&, Renderer*, QScreen*)’:
hellowindow.cpp:62:40: error: invalid use of incomplete type ‘class QOpenGLContext’
m_context = new QOpenGLContext(this);
^
In file included from ../../../include/QtGui/qsurfaceformat.h:1:0,
from ../../../include/QtGui/../../src/gui/kernel/qsurface.h:45,
from ../../../include/QtGui/qsurface.h:1,
from ../../../include/QtGui/../../src/gui/kernel/qwindow.h:51,
from ../../../include/QtGui/qwindow.h:1,
from ../../../include/QtGui/QWindow:1,
from hellowindow.h:51,
from hellowindow.cpp:51:
[1] http://autobuild.buildroot.net/results/001/001bc930014fca8c2a8b7a390350b4e1a15fa375/build-end.log
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version is compatible with LibreSSL.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following build failure, which occurs on all architectures:
/tmp/cc6APNmN.s: Assembler messages:
/tmp/cc6APNmN.s: Error: `loc1@GLIBC_2.17' can't be versioned to common symbol 'loc1'
/tmp/cc6APNmN.s: Error: `loc2@GLIBC_2.17' can't be versioned to common symbol 'loc2'
/tmp/cc6APNmN.s: Error: `locs@GLIBC_2.17' can't be versioned to common symbol 'locs'
../o-iterator.mk:9: recipe for target '/tmp/output/build/glibc-2.25/build/misc/regexp.os' failed
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
After c0ad6ded01 expat: security bump to version 2.2.1
the system can hang on startup under certain circumstances.
This happens when:
* we use systemd as init system
* the random nonblocking pool takes a while to initialize
* this apparently doesn't happen on qemu, so this would not have
been caught by the runtime testing infrastructure
* it also doesn't seem to happen when network booting
For a more detailed description of the bug see here:
https://bugs.freedesktop.org/show_bug.cgi?id=101858
The patch should be in next dbus version 1.10.24
Set DBUS_AUTORECONF = YES because configure.ac is changed.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
[Arnout: add upstream commit sha + Marcus's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The azmq library provides Boost Asio style bindings for ZeroMQ. This
library is built on top of ZeroMQ's standard C interface and is intended
to work well with C++ applications which use the Boost libraries in
general, and Asio in particular.
Signed-off-by: RJ Ascani <rj.ascani@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Using the package instrumentation hooks, a file packages-file-list.txt is
created containing the list of files installed by a package with their size.
Due to the use of 'find -type f', symbolic links to files are not included
in this file list. Since the original purpose of this file was to calculate
the total size of a package and symbolic links have file size 0, this was
not a problem.
However, if packages-file-list.txt is reused for other purposes, for example
to get a complete list of files installed by a package regardless of size,
symbolic links to files are important too.
Likewise, to get a complete view of what a package installs, directories
should be included too.
Update the instrumentation hook accordingly.
Although for files an md5sum is taken, we cannot do this for directories.
Instead, mimic the output of md5sum with a fake hash string.
Note: for directories that are used by several packages, e.g. /etc/init.d/,
the package that created the directory will be treated as the 'owner' of
that directory. This gives a somewhat distorted view of ownership.
Similarly, the package size reported by 'make graph-size' (based on
packages-file-list.txt) will include the 'size' of a directory for that
owner, which is reported as e.g. 4096 bytes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Before and after the building of each package, the instrumentation hooks are
run. One of these hooks obtains the list of files installed by a package.
The code to obtain this list is currently duplicated in the start and end
part of the hook. While the amount of duplication is currently small, a
subsequent patch will make more changes to this code, increasing the
duplication.
Therefore, split off into a helper function.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
QtWayland is a Qt 5 module that wraps the functionality of Wayland.
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Brent Sink <brents_3@hotmail.com>
Cc: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
[Arnout:
- select wayland instead of depending on it;
- propagate jscore dependency from qt5declarative
- re-order select/depends statements
- rewrite comment to only refer to GL backend (jscore is an arch
dependency)
- rewrap help text of BR2_PACKAGE_QT5WAYLAND_COMPOSITOR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For the autoconf-based build system it was necessary to allow each
supported architecture separatly:
https://github.com/xbmc/xbmc/blob/Krypton/m4/xbmc_arch.m4
For the CMake build system this is not necessary anymore so we only
blacklist archs in Config.in known to be broken.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: slightly tweak the BR2_PACKAGE_KODI_ARCH_SUPPORTS definition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Removed the following patches due to being merged upstream:
- resolved-bugfix-of-null-pointer-p-question-dereferencing.patch
- resolved-simplify-alloc-size-calculation.patch
- resolved-do-not-allocate-packets-with-minimum-size.patch
- Updated the following patches to work with 234:
- fix-getty-unit.patch
- build-check-for-ln-relative.patch
- fix-am-path-libgcrypt-no-found.patch
- Updated ordering of remaining patches.
- Reformatted remaining patches as git style patches.
- Updated Upstream-Status comment in "build-check-for-ln-relative.patch" to
"Denied [No desire to support building on old distributions]"
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Marcus Hoffmann <m.hoffmann@caretelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Section sorting code in xtensa ld was incorrectly cleaned up in release
2.29, resulting in the following assertion when --sort-section,alignment
option is used:
BFD (GNU Binutils) 2.29 assertion fail elf32-xtensa.c:3965
Backport the fix that restores original section sorting.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some xtensa configurations there may be system/user registers in
xtensa-modules with negative index. ISA initialization for such config
may clobber heap and result in program termination.
Don't update lookup table entries for register with negative indices.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This host-only package was used to enable graphite support in GCC 4.9,
but Buildroot no longer supports Graphite optimizations in GCC 4.9
(only GCC >= 5.x is supported). Therefore, we can remove the cloog
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we no longer support Graphite optimizations in gcc 4.9 (which
required ISL 0.14.1), we can bump ISL to a newer version, which allows
to support Graphite optimizations in GCC >= 5.x.
The comment about the version being limited to 0.14.1 because of cloog
is no longer relevant, so it is removed.
Our libtool patch now applies properly, so we can remove
ISL_LIBTOOL_PATCH = NO.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas:
- remove ISL_LIBTOOL_PATCH = NO
- improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC 4.9.x requires an old version of ISL to support graphite, and this
old version of ISL is not sufficient to support graphite in modern GCC
versions.
Since GCC 4.9.x is getting older, and to keep things simple, we stop
supporting graphite on old GCC < 5.x. This way, we will be able to
bump ISL to a version that is suitable for modern GCC versions.
In addition, this allows to drop the dependency on cloog, which was
only needed for GCC 4.9.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We add the 3 following combinations:
- basic systemd, read-only, network w/ ifupdown
- basic systemd, read-only, network w/ networkd
- full systemd, read-only, network w/ networkd
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the rootfs is readonly, systemd will expect /var to be writable.
Because we do not really have a R/W filesystem to mount on /var, we make
it a tmpfs [*], and use the systemd-tmpfiles feature to populate it with
"factory" defaults.
We obtain those factory defaults by redirecting /var to that location at
build time, using a symlink /var -> /usr/share/factory which is the
location in which systemd-tmpfiles will look for when instructed to
"recursively copy" a directory.
With a line like:
C /var/something - - - -
it will look for /usr/share/factory/something and copy it (recursively
if it is a directory) to /var/something, but only if it does not already
exist there.
We also mark this copy with the exclamation mark, as it is only safe to
copy on boot, not when changing targets.
To be noted: the real format for such lines are:
C /var/something - - - - /from/where/to/copy/something
But if the source is not given, then it is implicitly taken from
/usr/share/factory (which in our case is as-good a location as whatever
else, so we use it, and thus we need not specify the source of the
copy).
Note that we treat symlinks a little bit specially, by creating symlinks
to the factory defaults rather than copying them.
Finally, /var at build time is a symlink, but at runtime, it must be a
directory (so we can mount the tmpfs over there). We can't change that
as a target-finalize hook, because:
- some packages may want to set ownership and/or access rights on
files or directories in /var, and that only happens while assembling
the filesystem images; changing /var from a symlink to a (then
empty) directory would break this;
- /var would be a directory on sub-sequent builds (until the next
"make clean").
Instead, we use the newly-introduce pre- and post-rootfs command hooks,
to turn /var into a directory before assembling the image, and back to a
symlink after assembling the image.
[*] People who want the factory-defaults only on first boot will have
to tweak the fstab to mount something else than a tmpfs on /var.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, the directory structure we want in the filesystem is not
exactly what we have in target/
For example, when systemd is used on a read-only rootfs, /var must be a
tmpfs. However, we may have packages that install stuff in there, and
set important rights (via the permission-table). So, at build time, we
need /var to be a symlink to the remanent location (/usr/share/factory)
while at runtime we need /var to be a directory.
One option would have been to have /var as a real directory even during
build time, and in a target-finalize hook, move everything out of there
and into the "factory" location. However, that's not possible because
it's too early: some packages may want to set ownership and/or acces
rights on directories or files in /var, and this is only done in the
fakeroot script, which is called only later during the assembling of the
filesystem images.
Also, there would have been no way to undo the tweak (i.e. we need to
restore the /var symlink so that subsequent builds continue to work) if
it were done as a target-finalize hook.
The only solution is to allow packages to register pre- and post-hooks
that are called right before and right after the rootfs commands are
executed, and inside in the fakeroot script.
We can however not re-use the BR2_ROOTFS_POST_FAKEROOT_SCRIPT feature
either because it is done before the filesystem command, but there is
nothing that is done after. Also, we don't want to add to, and modify a
user-supplied variable.
So, we introduce two new variables that packages can set to add the
commands they need to run to tweak the filesystem right at the last
moment.
Those hooks are not documented on-purpose; they are probably going to
only ever be used by systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For systemd, we create a simple /etc/fstab with only an entry for /, as
systemd otherwise automatically mounts what it needs where it needs it.
systemd does not like that the content of /var be symlinks to /tmp,
especially journald that starts before /tmp is mounted, and thus the
journal files are hidden from view, which causes quite a bit of fuss...
Instead, move the current /var to a sysv-only skeleton.
systemd at install time will create the /var content it needs, so we
just create an empty /var for systemd.
systemd would create /home and /srv at runtime if they are missing, but
it is better to create them right now, to simplify supporting systemd on
a RO filesystem in the (near) future.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we use the same skeleton for sysv-like init systems and
systemd, even though systemd has some peculiarities that makes our
default skeleton unfit.
So, we'll need to provide different skeletons (really, only part of
it) for sysv-like and systemd. In addition, in order to support the
"no init system" (BR2_INIT_NONE) use case, we introduce a "none"
skeleton.
Introduce three new skeleton packages, aptly named skeleton-sysv,
skeleton-systemd and skeleton-none. All three are providers of the
skeleton virtual package, in lieu of the skeleton-common package,
which is now a simple dependency of all three new skeletons.
Those packages are empty for now. In followup changes:
- sysv-specific stuff will be moved out of skeleton-common and into
skeleton-sysv;
- systemd-specific stuff will be added to skeleton-systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- merge with the patch that enables the BR2_INIT_NONE case
- simplify the BR2_PACKAGE_SKELETON_COMMON_ONLY select logic]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- remove the BR2_PACKAGE_SKELETON_COMMON_ONLY logic, and instead
introduce a separate skeleton-none package for the BR2_INIT_NONE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't really care what's going in staging, as long as it is properly
setup for merged/non-merged /usr, especially for the lib/ directory.
So we can just copy the skeleton as-is.
This simplifies maintenance, should we ever need to tweak the layout:
we'd just have to do it once in the skeleton directory to have it
propagated to both target and staging.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have two packages that can act as a skeleton, skeleton-common,
also known as our default skeleton, and skeleton-custom.
This means that the skeleton package can be a standard virtual package
now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package variables should always be prefixed with the package name. For
SKELETON_COMMON_ROOT_PASSWORD, this means we set the variable a second
time based on the value it previously had. Fortunately, this is fine
for make, even for recursively expanded variables.
This also allows to simplify the condition of the empty password - it's
not needed to set it again to empty if it already was empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all the handling of the default skeleton into a new package,
skeleton-common.
We don't name it skeleton-default, because it will be further split
later, into a skeleton for sysv and another for systemd, with some parts
still common between the two. So just name it skeleton-common right now;
this will save us a rename later.
While we're at it, also assign to SKELETON_COMMON_TARGET_FINALIZE_HOOKS
instead of directly to the global FINALIZE_HOOKS. Therefore, we don't
need to do all of that in a condition BR2_PACKAGE_SKELETON_COMMON==y.
Note: it would be technically sound to move the skeleton files together
within a sub-directory of the skeleton-common package. However, we refer
the user to those files, from various locations (manual, packages). It
will indeed be easier for the user to find those files in
system/skeleton/ rather than in package/skeleton-common/skeleton/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: remove the mkdir $(STAGING_DIR)/usr/include which was removed
in skeleton.mk in master.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For target install, we don't need to check the merged-usr symlinks
any more, it was already checked before.
For staging, instead of creating directories, just copy the same
skeleton, which was already checked to be correct.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to checking the symlinks in the merged usr case, also check
whether /bin, /lib, /sbin and their /usr/... counterparts exist in the
non-merged case.
Missing directories are collected in the variable
SKELETON_CUSTOM_MISSING_DIRS. For symmetry and because it's more
logical, rename SKELETON_CUSTOM_NOT_MERGED_USR to
SKELETON_CUSTOM_NOT_MERGED_USR_DIRS.
When a directory is indeed missing, "stat" will print an error.
Buildroot *also* prints an error, which is clearer. So remove the error
from stat by redirecting it to /dev/null.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
skeleton-custom.mk contains a huge condition for BR_BUILDING and for
BR2_ROOTFS_MERGED_USR. This makes the code difficult to follow, so
rework the condition a bit so that only the parts that really need to
be conditional are indeed conditional.
Note that there is no overhead in needlessly evaluation the "stat"
commands. Indeed, the assignments use late evaluation so the "stat"
is only executed when evaluating the condition - when skeleton-custom
is not selected, stat is never called.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the custom skeleton, we practicaly do nothing, except ensure it
contains the basic, required directories, and that those are properly
setup wrt. merged /usr.
Furthermore, our current skeleton is not fit for systemd, and we'll
have to split things out into various skeletons.
So, off-load the custom skeleton into its own package.
Thus, the existing skeleton package is now limited to:
- when using our default skeleton, install and tweak it properly;
- when using a custom skeleton, do nothing except for depending on
the skeleton-custom package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch doing only this]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "builtin" kernel does not boot a systemd-based system, so
we resort to building the same one as currently used by our
qemu_arm_vexpress_defconfig.
We test the 8 following combinations:
- busybox, read-only, without network
- busybox, read-only, with network
- busybox, read-write, without network
- busybox, read-write, with network
- basic systemd, read-write, network w/ ifupdown
- basic systemd, read-write, network w/ networkd
- full systemd, read-write, network w/ networkd
- no init system, read-only, without network
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
samba4 picks up dbus as dependency if it was built before:
Checking for dbus : yes
Checking for header dbus/dbus.h : yes
Checking for library dbus-1 : yes
There is no configure option to control dbus support so we just make
sure dbus is built before samba4 to have reproducible builds.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch allows building samba4 with uClibc again after rpc support
was removed from uClibc. Building with musl is still broken:
The first error
../nsswitch/wins.c: In function ‘_nss_wins_gethostbyname_r’:
../nsswitch/wins.c:272:15: error: ‘NETDB_INTERNAL’ undeclared (first use in this function)
*h_errnop = NETDB_INTERNAL;
^~~~~~~~~~~~~~
../nsswitch/wins.c:272:15: note: each undeclared identifier is reported only once for each function it appears in
../nsswitch/wins.c:349:14: error: ‘NETDB_SUCCESS’ undeclared (first use in this function)
*h_errnop = NETDB_SUCCESS;
^~~~~~~~~~~~~
could be solved by applying
https://git.alpinelinux.org/cgit/aports/tree/main/samba/netdb-defines.patch
but then the build fails at
../ctdb/tests/src/test_mutex_raw.c: In function ‘main’:
../ctdb/tests/src/test_mutex_raw.c:170:28: error: ‘pthread_mutex_t {aka struct <anonymous>}’ has no member named ‘__data’
printf("pid=%u\n", mutex->__data.__owner);
^~
Therefore we disable musl support until a fix can be found.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- instead of setting SAMBA4_CONF_ENV within the libtirpc condition,
introduce SAMBA4_CFLAGS and SAMBA4_LDFLAGS variables and use them
- add missing dependency on host-pkgconf, needed because we call
pkg-config to get the flags from libtirpc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been introduced, and we have moved to
2.28.1 as the default version, it is time to drop support for binutils
2.26.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been released, it is time to move to
binutils 2.28.x as the default binutils version, instead of 2.27.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both our target and host gdb depend on ncurses (host-ncurses for
host-gdb, of course). However, while for the target we passs
--with-curses, we are not doing this for the host variant. Due to
this, host-gdb default to using the termcap library: if such a library
is available on the build system, it will be used instead of the
host-ncurses we have built. This causes the host gdb binary to depend
on a library that we do not provide in $(HOST_DIR), breaking the
principle of a standalone SDK (which should only depend on the C
library).
To solve this, we simply pass --with-curses in HOST_GDB_CONF_OPTS,
which forces host-gdb to use the host-ncurses library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
UTF-8 formatted file breaks installations on some systems:
Traceback (most recent call last):
File "setup.py", line 34, in <module>
long_description=open('README.rst').read() + '\n\n' + open('HISTORY.rst').read(),
File "/home/peko/autobuild/instance-1/output/target/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 1125: ordinal not in range(128)
This patch replaces '§' with 'S' meaning 'Section' and hence converts file to plain ASCII.
Fixes:
http://autobuild.buildroot.net/results/4189b2ddcd3d59c629af78e4d455a29c77f8c683/
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our current skeleton is tailored to sysv-like init systems; it is not
fit for systemd-based systems. So, in upcoming changes, we'll add
another skeleton for systemd.
This means we can no longer have the current skeleton default to 'y', or
it would be enabled also for systemd, which would be incorrect.
So, we remove the default to 'y' but have it selected by the default
skeleton choice.
However, we do not yet have a way to directly build (really, install)
the custom skeleton, it is built (really, installed) as a dependency of
the default skeleton. So we must also forcibly select the default
skeleton when using a custom one.
Until we have the means to do only one or the other; i.e. when we have a
virtual skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setting the root pasword is done in a target-finalize hook, so we do not
need to enforce a dependency from the skeleton onto host-mkpasswd.
Dropping that dependency will simplify making skeleton a virtual
package (in up-coming changes).
Instead, it is now selected as any other package. As such, it is
guaranteed to be built before target-finalize.
This however introduces a slight change in behaviour: previously,
host-mkpasswd would only be built if we needed to hash the root password
from its plain-text value. Now, host-mkpasswd is always built as soon as
the root password is non-empty, even if already pre-hashed.
Since host-mkpasswd is a really tiny weeny package bundled in Buildroot,
with only two C files, built as a single unit with a single gcc call,
the overhead is really minimal. Compared to the simplifications this
will allow in the skeleton packages (plural: common, sysv, systemd,
custom) to come, this overhead is acceptable.
Yet another simplification, even if small, to ease providing multiple
skeletons.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the password generation as a post build step.
This prepares the option to remove the admin panel from
installation.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 0.6, libcodec2 switched buildsystem from autotools to
cmake.
The patches in the libcodec2 directory were removed because they were
only relevant to the autotools build, but another patch was added to
fix the codec2.pc file being installed.
For the cmake package unittests are disabled by default. The download
site is changed to http://files.freedv.org/codec2. An option is added
to be able to install examples to target.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: switch to 0.7, add patch to fix .pc file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches from binutils 2.28 are kept, except patch
0906-microblaze-pr21180.patch, because it has been merged upstream as
of commit bd757ca7bf5886a4025ca02093fca1b8c5ce11a2. Other patches are
slightly adapted to differences that appeared in binutils 2.29.
The patches are now all Git formatted, so instead of having weird
sequence numbers, they have normal sequence numbers starting from 0001
and incrementing.
Since binutils 2.29 is now available as a .tar.xz tarball, we use this
format instead of .bz2 used for previous versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils 2.28.1 is a bug-fix release of the 2.28.x branch, so let's
switch to it.
Since a xz-compressed tarball is available, we use it instead of the
bz2-compressed one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes when a test fails in a gitlab pipeline the reason of the
failure cannot be determined using only the logfile.
Add the modified rootfs as an artifact of the job to improve
troubleshooting. To accomplish this, always use -k option from the test
infra, unconditionally add the resulting images to the artifacts, and
let the runner do the cleanup for us.
These artifacts can also be useful when a test fails locally but pass at
gitlab runners.
When the test does not generate a image, this message is displayed in
the runner log:
WARNING: test-output/*/images/*: no matching files
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream switched to CMake, host-pkgconf is not needed anymore.
Instead of using the latest release 1.1.6 we use current git HEAD
because it contains important patches:
"Support both static and shared library CMake builds."
c756f7f5d9
"Redo CMake configuration", this commit allows to disable building
Snappy's own tests.
be6dc3db83
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
lib in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter l in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter k in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter j in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter i in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter h in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter g in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter f in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter e in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Busybox 1.17.1 has added built-in TLS support. Unfortunately, it fails
to build on i686 with gcc 4.8, with:
networking/tls_pstm_mul_comba.c: In function 'pstm_mul_comba':
networking/tls_pstm_mul_comba.c:82:1: error: 'asm' operand has impossible constraints
asm( \
^
networking/tls_pstm_mul_comba.c:279:4: note: in expansion of macro 'MULADD'
MULADD(*tmpx++, *tmpy--);
^
make[3]: *** [networking/tls_pstm_mul_comba.o] Error 1
make[2]: *** [networking] Error 2
Since TLS support is a new feature in 1.27, and wasn't present until
now, let's disable it to avoid the build failure.
The bug has been reported upstream at
http://lists.busybox.net/pipermail/busybox/2017-July/085713.html.
Fixes:
http://autobuild.buildroot.net/results/d973f9a2fbf0f52104f4943b902183e9dbf163a7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Detecting the boost program_options library is broken:
checking for the Boost program_options library... no
configure: error: cannot find the flags to link with Boost program_options
config.log shows the reason, libatomic is missing:
conftest.o: In function `boost::detail::sp_counted_base::release()':
conftest.cpp:(.text._ZN5boost6detail15sp_counted_base7releaseEv[_ZN5boost6detail15sp_counted_base7releaseEv]+0xc):
undefined reference to `__atomic_fetch_sub_4'
conftest.cpp:(.text._ZN5boost6detail15sp_counted_base7releaseEv[_ZN5boost6detail15sp_counted_base7releaseEv]+0x38):
undefined reference to `__atomic_fetch_sub_4'
/home/buildroot/br4/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libboost_program_options.so:
undefined reference to `__atomic_fetch_add_4'
Please note that using LIBS=-latomic is not enough, although it fixes
the configure check the bug reoccurs when linking cc-tool:
CXXLD cc-tool
src/application/cc_flasher.o: In function `boost::detail::sp_counted_base::weak_release()':
cc_flasher.cpp:(.text._ZN5boost6detail15sp_counted_base12weak_releaseEv[_ZN5boost6detail15sp_counted_base12weak_releaseEv]+0xc):
undefined reference to `__atomic_fetch_sub_4'
We need to add -latomic to CXXFLAGS to both fix configure and linking.
Fixes
http://autobuild.buildroot.net/results/596/596f97364bb2c7598b0646da8160939356f0d2c6/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we have multiple versions for a package, and the licensing terms
depend on the version actually selected (e.g. like Qt5), storing the
hashes for those license files in the .hash file is broken: the infra
will ensure that all hashes for a file do match, which would not be the
case here.
We fix that by first looking for a hash file in the version sub-dir
first, and if that does not exist, then we use the main hash file.
Drop the useless intermediate variable 'ret'.
Update the documentation accordingly.
Reported-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Drop patch 0002-column-fix-compilation-when-libc-lacks-wide-characte.patch
as it has been applied upstream
- Patch 0001-Revert-build-sys-ncurses-headers-cleanup.patch is still
required to fix ncursesw support.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Cc: "Carlos Santos" <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, update busybox-minimal.config and busybox.config by loading the
config files and saving them back.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain configuration used by the autobuilders to test the
internal toolchain backend on ARM contains an option that no longer
exists: BR2_UCLIBC_VERSION_NG. This option has been removed since
uClibc-ng has been made the one and only uClibc version supported.
Due to this option no longer existing, this toolchain configuration
was in fact never used, because the randgenconfig script validates
that a toolchain configuration is valid by checking that all lines are
still present in the final .config.
Therefore, this commit removes the bogus option, which will make sure
this toolchain config gets used again by our autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When testing a package with test-pkg, it may be useful to override the
set of toolchains used. For example:
- to test with toolchains used in your company;
- to test against a subset that is known to be problematic;
- to use only toolchains you already have available locally when you
have no network access.
Add an option to use an alternate CSV file containing the config
fragments of toolchains to try.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apparently the service identify code requires the python attrs
to be availabe:
Traceback (most recent call last):
File "/opt/exablox/bin/configsrv", line 5, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3138, in <module>
@_call_aside
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3124, in _call_aside
f(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3151, in _initialize_master_working_set
working_set = WorkingSet._build_master()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 661, in _build_master
ws.require(__requires__)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 962, in require
needed = self.resolve(parse_requirements(requirements))
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 849, in resolve
raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'attrs' distribution was not found and is required by service-identity
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If building Xen and not using glibc (using musl for example) the QEMU
project inside of Xen fails to build as it relys on the XATTR_SIZE_MAX
macro which is defined in <linux/limits.h>.
Glibc includes this header indirectly but as that is not part of the
POSIX standard other libraries don't neccessearily have this. To fix the
issue we explicitly include <linux/limits.h> to ensure the build works
for all libc libraries.
Fixes:
http://autobuild.buildroot.net/results/bb1/bb1310eb1464d880a357ae5e491fd168361d25a0
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two added patches allow building WebKitGTK+ when the compiler
scpecifically targets ARMv8-A, and reports as such be pre-defining
__ARCH_ARM_8A__ instead of just __ARCH_ARM_8__. Both patches were
pulled from the corresponding upstream bug reports and edited to
remove the conflicting parts which edit the ChangeLog files.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both patches applied upstream.
The release contains mostly bugfixes and a basic sparc64
port. As the sparc64 port only contains support for static
binaries, it will be not enabled in buildroot yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ICU depends on BR2_HOST_GCC_AT_LEAST_4_8 and
BR2_TOOLCHAIN_GCC_AT_LEAST_4_8, these dependencies are propagated to
qt5webkit but were not propagated to qt-webkit-kiosk.
Fixes [1]:
The WebKit build was disabled for the following reasons:
* ICU is required.
[...]
cp -dpf .../host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libQt5WebKit*.so.* .../target/usr/lib
cp: cannot stat `.../host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libQt5WebKit*.so.*': No such file or directory
[1] http://autobuild.buildroot.net/results/2f3/2f381967c82775ad911a246a9607034ef489c1ce
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- rewrap commit message
- fix spelling mistakes in commit message
- reformulate the dependency comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Other changes:
- Refresh 0001-misc.patch to work with 1.0.17.
- Reformat 0001-misc.patch to git style patch.
- Rename 0001-misc.patch to 0001-misc-fixes-from-archlinux.patch.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On Fedora26, openssl 1.1.x is included by default. This causes build
errors when building the host variant of mariadb.
Adding -DWITH_SSL=bundled fixes this issue.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2017-7018 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7030 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7034 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7037 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7039 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7046 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7048 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7055 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7056 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7061 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7064 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
The issue involves the "WebKit" component. It allows attackers to bypass
intended memory-read restrictions via a crafted app.
For more details, see the announcement:
https://webkitgtk.org/2017/07/24/webkitgtk2.16.6-released.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Adrian Perez de Castro" <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've had this mkdir, in various forms, for aeons. It dates back to
the inception of Buildroot, at the dawn of ages, when the toolchain
support was still nascent. Evolution had it morph from /include, to
a tuple-prefixed directory and a symlink there-to, then back to the
/include directory, to the final /usr/include directory we've had
for the last 9 years.
Anything that wants to install headers is supposed to be creating
that directory beforehand; we don't need this legacy mkdir now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since we now request that the user sets the exact size of the ext2/3/4
filesystem, we've had quite a few users wondering what was going on when
they enable too much and the default 60M are no longer enough.
When mkfs.ext2 fails, print a hint that the user should check the size
setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: Add *** and redirect to stderr]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When the ICU package is enabled (BR2_PACKAGE_ICU=y) but ICU support in
cppcms is disabled (BR2_PACKAGE_CPPCMS_ICU is disabled), cppcms still
detects ICU, but it fails to build since we don't get the proper ICU
CXXFLAGS.
In addition, this is not the intended behavior: when
BR2_PACKAGE_CPPCMS_ICU is disabled, we expect cppcms to be built
without ICU support.
To achieve this, we pass -DDISABLE_ICU_LOCALE=ON when
BR2_PACKAGE_CPPCMS_ICU is disabled (yes DISABLE_ICU_LOCALE means the
logic is inverted).
While at it, we pass DISABLE_ICU_LOCALE=OFF when ICU support is
enabled, and not DISABLE_ICONV=ON. The latter has been passed in this
condition since the cppcms package was introduced in Buildroot, but it
doesn't seem to make sense.
Fixes:
http://autobuild.buildroot.net/results/b6a8c7000c5742efc9d8e13507dab86e36b62840/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since we introduced the support for building Busybox as individual
binaries, Busybox started failing to build on SPARC/SPARC64 with this
feature enabled:
appletlib.c:(.text.find_applet_by_name+0x14): relocation truncated to fit: R_SPARC_GOT13 against symbol `applet_nameofs' defined in .rodata.applet_nameofs section in libbb/lib.a(appletlib.o)
appletlib.c:(.text.find_applet_by_name+0x18): relocation truncated to fit: R_SPARC_GOT13 against symbol `applet_names' defined in .rodata.applet_names section in libbb/lib.a(appletlib.o)
[...]
This commit adds two patches to Busybox to fix this issue, by adding
-fPIC to CFLAGS when building on SPARC/SPARC64. The patches have been
submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/90144369ccea8c41ec7643a79a7ebfaa9b7db95c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is used by Kconfig's merge_config.sh.
No alldefpackageconfig is added, since it's rather pointless: it would
only enable busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules for the *config targets are all very similar, so factor them
together using $@.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This column is not used by either genrandconfig or test-pkg, so remove
it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
The --toolchains-url option is renamed to --toolchains-csv.
The paths in the toolchains_csv file should be either absolute, or
relative to buildrootdir.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-csv", kwargs['toolchains_csv']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have a list of toolchain configurations that are used by
the autobuilders at [1]. However, this makes it a little more difficult
for people to use these configurations, and also to have a different
list of configurations for different branches. For example if a new
architecture is introduced, the 2017.02.x branch doesn't have support
for this architecture yet so it shouldn't try to run those configs.
Therefore, include the autobuild config fragments directly in Buildroot,
so they can be branched together with the rest. We create a new
directory under support/ to store them.
Generated with
wget -nd --no-parent --recursive http://autobuild.buildroot.net/toolchains/configs/
The index.html file is removed.
The toolchain-configs.csv file is adapted so the URLs become relative
paths pointing to the config fragments.
[1] http://autobuild.buildroot.net/toolchains/configs/toolchain-configs.csv
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This has a number of side-effects which must be handled.
The lines in minimal.config may be overridden by the random lines added
by amending the configuration, so is_toolchain_usable() shouldn't take
those into account, or indeed the random lines added. Therefore, make
a copy of the config before appending minimal.config and the random
lines. While we're at it, rename the variable to the more appropriate
toolchainconfig.
minimal.config sets BR2_INIT_NONE=y, but we really also want to test
with BR2_INIT_BUSYBOX=y. Therefore, add a random line to use the
busybox init system. We set its probability rather high. The
probabilities of systemd and eudev are increased since they're now
in the else branch of BR2_INIT_BUSYBOX, which halves the probability
that we even get there.
We now also generate configurations without busybox. Previously,
busybox was almost always selected due to BR2_INIT_BUSYBOX=y. Only if
systemd is selected there was a chance to build without busybox.
We now set BR2_SYSTEM_BIN_SH_NONE=y, the other /bin/sh options are
never tested. However, this is not really something that is relevant
to test in the autobuilders.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When outputdir is 'output' (the default), genrandconfig didn't work
correctly because it expects the configfile in outputdir, while
Buildroot puts it in the buildroot directory.
Fix this by explicitly checking if outputdir == buildrootdir/output.
Because abspath is used for both paths, string comparison works
reliably.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path to the .config file is calculated in several places - replace
it with a single calculation, and pass configfile as an argument
to is_toolchain_usable and fixup_config. These functions also don't
need outputdir any more.
This makes it easier to fix the case when configfile is not in
outputdir.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The --instance argument is just an artifact of genrandconfig's
history as part of autobuild-run. It is much more logical to pass
the output directory and the buildroot directory as arguments, with
sane defaults.
This also allows us to remove the hack of creating a symlink in the
instance directory if it doesn't exist yet.
Note that the default outputdir 'output' doesn't work yet, because in
that case Buildroot will put the config file in the buildroot directory
instead of the output directory. This will be fixed in a follow-up
patch.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-url", kwargs['toolchains_url']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output of genrandconfig is currently very terse, which is annoying
for debugging the script or generally seeing what is going on. Also the
timing information added by log_write isn't very useful when the script
is used stand-alone.
In the new setup, (verbose) output goes to stdout and error output goes
to stderr. Also the "INFO: generate the configuration" message is
eliminated - it should go in the autobuild-run script.
We also add an explicit message when a toolchain can't be used after
the first defconfig, otherwise autobuild-run will just silently
restart.
Note that, since the output of make is no longer redirected to
/dev/null, we get one more message on stderr that will be recorded in
the autobuilder's log file: KCONFIG_SEED=0xXXXXXXXX.
This approach allows us to optimise the error handling to use
exceptions, where appropriate, which can be caught at the top level and
converted to an error message to stderr. This, in turn, allows us to use
subprocess.check_call, which eliminates a lot of conditions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SystemInfo class is instantiated globally and passed down to all
functions, but it is really only used in fixup_config. So instead,
instantiate it there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kwargs is a left-over from the use of docopt, it's better to use
argparse's Namespace object directly.
In addition, most functions use just one or two fields of args, so
these can just as well be passed directly as arguments to the function.
Particularly for outputdir it doesn't make sense to reconstruct it all
the time.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warnings fixed:
E731 do not assign a lambda expression, use a def
-> urlopen_closing is defined with a def. urlopen is not used
elsewhere so inlined.
E302 expected 2 blank lines
E501 line too long
-> long lines due to a long string are NOT split
E701 multiple statements on one line (colon)
E722 do not use bare except'
-> use "except Exception", so KeyInterrupt and SystemExit are still
passed. We never intended to catch those.
E741 ambiguous variable name 'l'
-> variable name is replaced with the much more descriptive
toolchains_csv
E271 multiple spaces after keyword
E231 missing whitespace after ','
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Popen is more complicated and more difficult to understand.
check_output raises an exception if the exit code is non-zero, but
that's probably what we want if ldd can't be executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script will be used by the autobuild-run script to generate the
configuration to test. It is put in the utils directory because it can
also be called directly to allow users to test things.
For now, it is a direct copy of the relevant functions from the
autobuild-run script. The only changes are:
- unneeded import statements are removed;
- code/decode wrappers are limited to decode_byte_list;
- __main__ handling is added.
For now, the only supported arguments are the ones needed for
autobuild-run. Follow-up patches will refactor things and also change
the way the script is called. In this version, it can be called from the
autobuild-run script as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-i", str(kwargs['instance']),
"--toolchains-url", kwargs['toolchains_url']],
stdout=log, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RUNDIR installs the test applications and shared libraries into a
different folder then /usr/lib. This is desired as there are a lot of
test apps which would get installed into /usr/lib without
organization. Instead, set RUNDIR=/usr/lib/paxtest to install the test
apps and libraries in a sub folder. The genpaxtest script accounts for
this path and handles a LD_LIBRARY_PATH update as part of the paxtest
script's exeuction.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package to provide Zstandard compression tools
(see https://facebook.github.io/zstd)
Minimal config snippet for utils/test-pkg is as follows:
BR2_PACKAGE_ZSTD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas:
- use "config" instead of "menuconfig" in Config.in
- add missing final newline in Config.in
- pass DESTDIR=$(TARGET_DIR) only at install time
- wrap too long lines in the .mk file
- remove useless empty newline at end of .hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.07 and kernel to version 4.12.3.
As imx_v6_v7_defconfig in 4.12 selects CONFIG_CFG80211_WEXT=y,
remove the linux.fragment file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit de903755d7 (grep: fix build failure for musl) added
--with-included-regex to configure options in musl builds. The commit log
mentions build failure because grep configure doesn't detect the missing libc
regex support. Unfortunately, the commit log adds no details on said build
failure, or any autobuilder reference. The autobuilder didn't record
any grep build failure for version 2.20 that was current at the time.
Build with musl succeeds nowadays, so remove the workaround.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the 'disable' config option in the 'else' clause of the optional
dependency as is the common pattern.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit cf3cd4388a the -j option is
silently ignored.
The configuration lines are processed using '\n'.join().
This function adds intervening occurrences of the separator, but the
resulting string does not end at a separator.
>>> "n".join(["a","b"])
'anb'
It results in a defconfig that does not end in a newline.
When BR2_JLEVEL is added by -j logic to the defconfig it ends up
concatenated to the last line of the defconfig.
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM=yBR2_JLEVEL=7
The resulting .config has the default BR2_JLEVEL=0.
Instead of just workaround this problem by adding a newline before
BR2_JLEVEL when -j is used, make the defconfig to end in a newline since
it is a more future-proof solution.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes security bugs CVE-2017-11103 & CVE-2017-6594
Changed upstream tarball location as noted in the release notes:
http://www.h5l.org/releases.html?show=7.4.0
--with-db-type-preference= is needed to fix a build error:
CCLD otp
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_get_internal':
otp_db.c:(.text+0x32): undefined reference to `__roken_dbm_fetch'
otp_db.c:(.text+0xd9): undefined reference to `__roken_dbm_store'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_db_open':
otp_db.c:(.text+0x1c9): undefined reference to `__roken_dbm_open'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_db_close':
otp_db.c:(.text+0x205): undefined reference to `__roken_dbm_close'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_delete':
otp_db.c:(.text+0x23e): undefined reference to `__roken_dbm_delete'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_put':
otp_db.c:(.text+0x388): undefined reference to `__roken_dbm_store'
collect2: error: ld returned 1 exit status
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have 0001-remove-__FAVOR_BSD.patch in uClibc-ng (which is
upstream and will be part of uClibc-ng 1.0.26), we no longer need the
work-around patch in the ndisc6 package.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable is currently not used by anyone.
The value is changed to match the path to DL_DIR.
The next patch will introduce the use of PKG_DL_DIR for packages that
use specific EXTRACT_CMDS.
And then we will be able to change the value of PKG_DL_DIR to create a
new directory structure in DL_DIR with a subdirectory for each package.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-aespipe fails on Debian stretch at linking stage:
/usr/bin/gcc -L/home/buildroot/br6/output/host/lib -L/home/buildroot/br6/output/host/usr/lib -Wl,-rpath,/home/buildroot/br6/output/host/usr/lib -o aespipe aespipe.o aes-amd64.o md5-amd64.o md5-2x-amd64.o aes-intel64.o sha512.o rmd160.o
/usr/bin/ld: aes-amd64.o: relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
The same problem apparently exists on recent Ubuntu and Gentoo.
Fix is also used in Debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837393
[Peter: add comment explaining why]
[Arnout: use host-cc-option to discover if -no-pie is available;
cfr. 57b628a932]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This macro allows to test if HOSTCC supports a specific option. It is
needed to pass '-no-pie' on recent Debian, Ubuntu and Gentoo hosts.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The big.LITTLE configurations can be optimised for by gcc, and a few
users wonder what they should choose when they have such CPUs.
Add new entries for those big.LITTLE configurations.
Note: the various combos were added in various gcc versions, but only
really worked in later versions:
Variant | Introduced in | First built in
----------+---------------+----------------
a15-a7 | 4.9 | 4.9
a17-a7 | 5 | 5
a57-a53 | 4.9 | 6
a72-a53 | 5 | 6
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all architecture options to their own symbol, so that it is easier
to add more variants in the future.
The dependency on cross-gcc >= 4.5 is only valid for i386, as we use the
host gcc for x86_64. Adapt the dependency accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
[Thomas:
- add comment about host gcc >= 4.5 dependency on x86-64
- remove bogus "depends on ... if ..." construct.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the build of efivar with gcc 7.x has been fixed by commit
0ca3017034 ("efivar: fix build with gcc
7"), efibootmgr fails similarly with gcc 7.x.
This commit backports an upstream patch that fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on Python implementation used for testing, time it takes to
perform a given test can vary pretty significantly. To accout for that
allow individual test functions to specify different timeout value.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be able to leverage the same test code for testing
different python interpreters (or wrappers around CPython) allow child
classes of TestPythonBase to override the name of the executable used
to run tests.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Python3 version of TestPython2 to make sure both versions of
Python get unit-tested.
Modify the code of libc_time_test() to support that change (convert
the code to use Python3-style "print").
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert TestPythonBase to a true base class that only provides code
implementing various tests without defining tests themselves in a
"discoverable" form.
To retain correct testing functionality, add TestPython2 derived class
that uses code from TestPythonBase to define actual runnable test.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: fix typo in commit log, update .gitlab-ci.yml, both pointed
by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, remounting / read-write (or not) is done by the skeleton
package when the init system is either busybox or sysvinit, by
registering a target-finalize hook; it is not done at all for systemd.
Move registering this target-finalize hook to both of busybox and
sysvinit. Leave systemd alone, we'll take care of it later.
Rename the macro to a more meaningful name, and move it to system.mk
with the other such macros.
Yet a little bit less init-system knowledge in the skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove not-so-useful comments, as pointed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, setting the getty is done:
- by the skeleton package when the init system is either busybox or
sysvinit;
- by the systemd package when the init system is systemd;
both by registering a target-finalize hook.
This is not very consistent.
Move setting the getty out of the skeleton and into the package that
provides the init system, by registering a per-package target-fialize
hook.
This offloads yet a bit more out of the skeleton, so that it is easier
to properly separate the skeletons for the various init systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rather than duplicate that code in all skeleton packages, make this a
macro, so that it is easier to use.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg always enables support for nvenc/cuda even if their support
libraries are not present:
External libraries providing hardware acceleration:
cuda cuvid nvenc
[...]
Enabled hwaccels:
h264_cuvid mjpeg_cuvid mpeg2_cuvid vc1_cuvid vp9_cuvid
hevc_cuvid mpeg1_cuvid mpeg4_cuvid vp8_cuvid
This leads to a crash in freeswitch git master when transcoding video
streams on a system without nvidia hardware:
2017-07-22 15:06:27.306760 [INFO] avcodec.c:1077 initializing encoder 352x288
2017-07-22 15:06:27.306760 [NOTICE] avcodec.c:828 NVENC HW CODEC ENABLED
This patch disables the support of nvidia hardware acceleration support
for now until the needed packages are added to buildroot. For details
about this please refer to https://developer.nvidia.com/ffmpeg
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rsync command is currently called from a single location. In
follow-up patches, it will be called from various places then.
It will be easier to update and fix this command if it is defined in a
single location, rather than if duplicated in many places.
Define a macro that skeleton packages can call to install their skeleton
directories. Since at least one occurrence of it will want to install in
staging, the macro must accept a destination path, rather than hard-code
target as the destination.
Since it is to be used by other skeleton packages, define it early,
outside of any conditional block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently skip the skeleton dependency by checking if the current
package is the skeleton.
We are going to introduce more skeleton-related packages, so we
need a way to exclude the skeleton dependency for those, or we'd
get a circular dependency, for the same reason we need to skip
the toolchain dependency.
Instead of checking for all the skeleton-providing packages in the core
infra, add a new package options so that packages can express they do
not need the dependency on the skeleton, like we have an option to avoid
the depednency on the toolchain. The only packages that will use that
option are probably the skeletons, so we need not document this
variable, like we did not document the option to exclude the dependency
on the toolchain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Rebase on top of mainline 2017.03 release
- Fix sparse image flashing issues
Here are the main Linux modifications:
- Add mma8451 driver support
- Fix possible TiWi spurious interrupts issue
- Fix Ethernet interrupt parent issue
- Add USB Type C TUSB320 controller support
- Add SOM2 i.MX6DL and i.MX6QP variants
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches 0001 to 0004 were upstream backports, so they have been
dropped. Patch 0005 has been upstreamed as commit
af5fb3d6e7. Therefore,
all 5 patches are dropped.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a separate make target to build a relocatable SDK. We first
sanitize the RPATH in host tree. Next we also sanitize the
staging tree. Therefore "sdk" must depend on world.
Sanitizing staging is not really needed, in the sense that any rpath
in there is simply not going to be used. We want to sanitize staging
for the following reasons:
- To avoid leaking references to the original output directory. This
way, we can validate that the SDK is relocatable by running a simple
"grep -r ${BASE_DIR} ${HOST_DIR}". Obviously RPATH sanitization is
not sufficient (e.g. also the references to source files have to be
stripped), but it's a step in the right direction. This reason is
obviously only relevant for the SDK.
- To make sure that when an executable is copied to target that it
actually executes correctly. Since within Buildroot we never copy
stuff from staging to target, this is clearly only relevant for
the SDK.
Finally we install the script "relocate-sdk.sh" into the top directory
of the SDK (HOST_DIR) and the SDK location path is stored in the file
"HOST_DIR/share/buildroot/sdk-location"-
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mfpxx option was added in gcc-5.1.0 so make sure that users cannot
select the "xx" fp32 mode when using toolchains that have a gcc older
than 5.1.0.
-mfp32 and -mfp64 were added in gcc-4.1.0, so given the older gcc
version we support in Buildroot (in the GCC_AT_LEAST options) is 4.3 we
don't need to do anything else for them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mnan option was added in gcc-4.9.0 so make sure that users cannot
select the NaN mode when using toolchains that have a gcc older
than 4.9.0, and also make sure that the -mnan option is not passed at
all to the toolchain-wrapper and target cflags.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note, that since version 2017.07 the sunxi targets needs the Python
libfdt library on the host. Therefore, additionally select the U-Boot
config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT for U-Boot
targets, like sunxi, needing the Python libfdt library.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: drop bogus selects on BR2_PACKAGE_HOST_{PYTHON,SWIG}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 2.16.5 of WebKitGTK+ already includes the fix added by the
removed patch, which is now unneeded.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The user shouldn't need to pass this manually when creating a test-pkg
config file. It's an absolutely harmless option to enable always.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We really want test-pkg to do the test with a paranoid unsafe path.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This minimal configuration is also very useful outside test-pkg. In
addition, it will simplify the config merge in a later patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of letting the configure script automatically detect the
presence of bluez package files, the script is now explicitly
instructed to enable or disable bluez (both 4.x and 5.x) support based
on the selection of the following packages: bluez_utils, bluez5_utils
and sbc.
Indeed, the bluez_utils or bluez5_utils packages were not sufficient
to enable Bluetooth support, the sbc package is also needed, but when
no --enable option is passed, the configure script silently disables
Bluetooth support if one of the dependencies is missing.
Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since ipmitool v1.8.17 usb support is turned off by default. Add a
config option to enable support for the usb interface.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file "qt.conf" can be used to override the hard-coded paths that
are compiled into the Qt library. This is required to make "qmake"
relocatable. Actually, we need to specify all variables to overwrite
the compiled in values.
CC: Julien Corjon <corjon.j@ecagroup.com>
CC: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanitize the RPATH of ELF files in the target tree to deal
with stupid packages that don't correctly use --prefix/DESTDIR
and that end up putting the full absolute build-time directory
in the RPATH.
We do it before copying the overlay and calling the post-build
script. The user is completely responsible for what happens
in the last two steps, and it should never be touched by us.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces the script "fix-rpath" able to scan a tree,
detect ELF files, check their RPATH and fix it in a proper way.
The RPATH fixup is done by the patchelf utility using the option
"--make-rpath-relative <root-directory>".
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch allows to use patchelf to sanitize the rpath of the buildroot
libraries and binaries using the option "--make-rpath-relative <rootdir>".
Recent versions of patchelf will not built on old Debian and RHEL systems
due to C++11 constructs. Therefore we stick with v0.9 for the time being.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The normal shell does not support the bashism "< <(...)". Therefore
we use a normal pipe to find files containing a specific string.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'if __name__ == "__main__"' idiom typically calls main function that
doesn't take any arguments in most cases. We shouldn't pass any tuple to
it.
I've tested the script with python-idna-2.5 and now it works with this
little change.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires libuv and by default will use an internal copy
bundled with the release. Change to using a shared libuv library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires libhttpparser and by default will use an internal copy
bundled with the release. Change to using a shared libhttpparser library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires c-ares and by default will use an internal copy
bundled with the release. Change to using a shared c-ares library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[Thomas:
- tweak Config.in help text as provided by Markus
- adjust commit log
- add missing select BR2_PACKAGE_NCURSES
- add missing dependency on host-pkgconf, used by the tmon Makefile
to find ncurses
- add logic to disable -fstack-protector when the toolchain doesn't
have SSP support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make inclusion ordering of all linux-tool-*.mk sub-makefiles explicit
instead of relying on alphabetical sort order. This is done by
renaming the Linux tools sub-makefiles to the format linux-tool-*.mk.in.
This causes the top-level Makefile to ignore the Linux tools
sub-makefiles.
Until now, the main Makefile included all linux-tool-*.mk files, as
well as linux-tools.mk, and it relied on alphabetical sorting to
include them in the proper order (linux-tool-*.mk before
linux-tools.mk).
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: improve comment in the code as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Add uClibc-ng compatibility fix. This is needed due to missing definition in
netinet/in.h.
Add license file hash.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nvme-cli had many bugfixes and improvements over the releases.
Buildroot still has version 0.3, so this patch bumps it to the
latest upstream release, version 1.3.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog since previous revision:
6a01dfb fix for memory leak in gc_hal_kernel_os.c
f73c35b Add support for PREEMPT_RT kernels
Also updating the help text to make sure users know this module won't
build with Mainline kernel but only with NXP forks.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, defining a config fragment in the runtime test infra requires
that the fragment not to be indented. This is beark, and causes grievance
when looking at the code (e.g. to fix it).
Just strip out all leading spaces/tabs when writing the configuration
lines into the config file, allowing in-line indented config fragments,
like so:
class TestFoo(bla):
config = bla.config + \
"""
FOO=y
# BAR is not set
"""
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-10324 - In libosip2 in GNU oSIP 4.1.0, a malformed SIP
message can lead to a heap buffer overflow in the osip_clrncpy() function
defined in osipparser2/osip_port.c.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MIPS supports two different NaN encodings, legacy and 2008. Information
about MIPS NaN encodings can be found here:
https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
NaN legacy is the only option available for R2 cores and older.
NaN 2008 is the only option available for R6 cores.
R5 cores can have either NaN legacy or NaN 2008, depending on the
implementation. So, if the user selects a generic R5 target architecture
variant, we show a choice menu with both options available. For well
known R5 cores we directly select the NaN enconding they use.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed in the mailing list, grub2 usage notes were growing too big
for a Config.in documentation, and so it was agreed that a readme.txt in
the package directory is a better place to put them.
This commit simply moves the documentation as-is to preserve the
original contents as they were in Config.in which can be worked on in
further commits.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After many years since the last release and a long time with grub 2.02
in beta, there is finally a release and it brings many bug fixes and
interesting features such as support for ARM.
Patch boot/grub2/0001-remove-gets.patch doesn't seem to be required
anymore as grub-core/gnulib/stdio.in.h has changed significantly since
"053cfcd Import new gnulib." and has another treatment for gets.
Patch
boot/grub2/0002-grub-core-gettext-gettext.c-main_context-secondary_c.patch
was a backport which is present after the bump and therefore is also no
longer necessary.
Since we're adding a Config.in comment, we also introduce a
BR2_TARGET_GRUB2_ARCH_SUPPORTS hidden boolean, in order to avoid
repeating the architecture dependencies.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add BR2_TARGET_GRUB2_ARCH_SUPPORTS, remove bogus dependencies
on ARM and AArch64, since enabling Grub2 on those architectures is
done in another commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have wordexp support in uClibc-ng and nodm is available, we can
use it for the graphical defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using this defconfig produces a build error with kodi:
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_SUNXI_MALI=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_PY_ONLY=y
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:37:1:
error: ‘string’ does not name a type
string CFTPParse::getName()
^~~~~~
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:62:25:
error: variable or field ‘setTime’ declared void
void CFTPParse::setTime(string str)
^~~~~~
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:62:25:
error: ‘string’ was not declared in this scope
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep currently doesn't really use wchar support anyways, and when
checking for wchar support, it's checking the host systems ncurses
libraries.
Remove support for ncurses wchar until it's used in sngrep, and remove
the patches used to fix ncurses wchar detection.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux kernel version to 4.12.1 and U-Boot to 2017.05.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the board specific patches which has been applied upstream.
[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since [1], NONLS is added to LSHW_CFLAGS even for glibc based toolchain.
Previously it was not the case since BR2_ENABLE_LOCALE is always
selected for glibc based toolchain.
With NONLS, config.h try to redefine two Intl function (textdomain and
bindtextdomain) that are used by glibc internally.
This break the build with the following error:
sysroot/usr/include/libintl.h:82:52: error: expected unqualified-id before 'throw'
extern char *textdomain (const char *__domainname) __THROW;
The NONLS mode is really for cases where the C library does not provide
*any* gettext implementation, as would be the case with uClibc without
intl stubs enabled.
But in the context of Buildroot, all C libraries provide a gettext
implementation. It might be full-featured or minimal, but it always
exists.
So, remove NONLS from CFLAGS to avoid the build issue with glibc
toolchains.
Build tested with a uClibc toolchain without locale enabled.
Fixes:
http://autobuild.buildroot.net/results/9bf/9bf5437b4348ea8077013b80a51ce05fa328247d
[1] 3acd9f845d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bugtracker is intended to be used for bug reports only, so clarify
it's not meant to be used for "any problem".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pulseaudio configure script autodetects the presence of
bluez 4.x and 5.x packages on the system and will exclude the
bluetooth-related modules in their absence.
This commit ensures that bluez5_utils, if selected, are installed
before pulseaudio. The same already happens for bluez_utils (4.x).
Signed-off-by: Calin Crisan <ccrisan at gmail dot com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsanitizer in gcc fails to build on PowerPC with gcc versions 4.9
and 5.x used in conjunction with glibc 2.25, with the following error:
../../../../gcc-host/libsanitizer/asan/asan_linux.cc: In function 'bool __asan::AsanInterceptsSignal(int)':
../../../../gcc-host/libsanitizer/asan/asan_linux.cc:222:20: error: 'SIGSEGV' was not declared in this scope
return signum == SIGSEGV && common_flags()->handle_segv;
This commit adds a patch that has been submitted to upstream gcc
(https://patchwork.ozlabs.org/patch/725596/) but not merged. The patch
is no longer needed with gcc 6.x and later because the code has been
reworked.
Fixes Buildroot bug #10061
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a Linux kernel patch to solve a build failure with
the arcturus_ucp1020_defconfig with gcc 6.x:
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
The patch is upstream in Linux, and can be dropped when
arcturus_ucp1020_defconfig is updated to use a new Linux kernel
version.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it can be interesting to call back into buildroot from a
post-build/image script (E.G. make printvars or similar). For this to work
correctly with out-of-tree builds we need to pass O= to make, but this is
currently not available in the environment of post-build/image scripts.
In concept, O could be derrived from BUILD_DIR (E.G. by stripping /build),
but directly exporting O is cleaner.
O= cannot be exported globally as it interferes with various build systems,
so instead add it to EXTRA_ENV.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vcdbg utility is linked to a few libraries, which so far were all
provided by the rpi-userland package.
But a not-so-recent bump of rpi-firmware pulled in a vcdbg that is
linked to an additional library, which is not privided by rpi-userland,
so we must install it.
Reported-by: cluelessperson on #buildroot
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-10688 - n LibTIFF 4.0.8, there is a assertion abort in the
TIFFWriteDirectoryTagCheckedLong8Array function in tif_dirwrite.c. A
crafted input will lead to a remote denial of service attack.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove Python2 only dependency as the package is compatible
with Python3.
Add a dot at the end of the help text.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7529 - Nginx versions since 0.5.6 up to and including 1.13.2
are vulnerable to integer overflow vulnerability in nginx range filter
module resulting into leak of potentially sensitive information triggered by
specially crafted request.
For more details, see:
http://mailman.nginx.org/pipermail/nginx-announce/2017/000200.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000381 - The c-ares function ares_parse_naptr_reply(), which
is used for parsing NAPTR responses, could be triggered to read memory
outside of the given input buffer if the passed in DNS response packet was
crafted in a particular way. This patch checks that there is enough data
for the required elements of an NAPTR record (2 int16, 3 bytes for string
lengths) before processing a record.
See https://nodejs.org/en/blog/release/v8.1.4/
[Peter: add CVE info]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-11103:
All versions of Samba from 4.0.0 onwards using embedded Heimdal
Kerberos are vulnerable to a man-in-the-middle attack impersonating
a trusted server, who may gain elevated access to the domain by
returning malicious replication or authorization data.
Samba binaries built against MIT Kerberos are not vulnerable.
https://www.samba.org/samba/history/samba-4.5.12.html
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patches 0003 & 0004, applied upstream.
Fixes the following security issues:
CVE-2017-7244 - The _pcre32_xclass function in pcre_xclass.c in libpcre1 in
PCRE 8.40 allows remote attackers to cause a denial of service (invalid
memory read) via a crafted file.
CVE-2017-7245 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 4) or possibly have unspecified
other impact via a crafted file.
CVE-2017-7246 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 268) or possibly have unspecified
other impact via a crafted file.
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/
inside the PYTHON_PATH variable, which gets used to define PYTHONPATH,
passed to the host Python interpreter when building/installing target
packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
Making this change allows to fix the python-cffi related build
failures:
http://autobuild.buildroot.net/results/a9af84f2d845ee25e2b7d8b92aef485112b46060/
(python-cryptography)
http://autobuild.buildroot.net/results/b017c4f6b4d45c0afbf06a80dbd3f2ebe5d49d20/
(python-pynacl)
http://autobuild.buildroot.net/results/25144ea191ad46d851b31d3a2f0ef939f215494b/
(python-smbus-cffi)
This change has been verified with the following defconfig that
enables a lot of Python packages:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.05-834-gb595627.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_ALSAAUDIO=y
BR2_PACKAGE_PYTHON_ARROW=y
BR2_PACKAGE_PYTHON_ATTRS=y
BR2_PACKAGE_PYTHON_AUTOBAHN=y
BR2_PACKAGE_PYTHON_BITSTRING=y
BR2_PACKAGE_PYTHON_BOTTLE=y
BR2_PACKAGE_PYTHON_CAN=y
BR2_PACKAGE_PYTHON_CBOR=y
BR2_PACKAGE_PYTHON_CHARDET=y
BR2_PACKAGE_PYTHON_CHEETAH=y
BR2_PACKAGE_PYTHON_CHERRYPY=y
BR2_PACKAGE_PYTHON_CONFIGOBJ=y
BR2_PACKAGE_PYTHON_CONFIGSHELL_FB=y
BR2_PACKAGE_PYTHON_CRC16=y
BR2_PACKAGE_PYTHON_CRCMOD=y
BR2_PACKAGE_PYTHON_CSSSELECT=y
BR2_PACKAGE_PYTHON_CSSUTILS=y
BR2_PACKAGE_PYTHON_DAEMON=y
BR2_PACKAGE_PYTHON_DIALOG=y
BR2_PACKAGE_PYTHON_DICTTOXML=y
BR2_PACKAGE_PYTHON_DJANGO=y
BR2_PACKAGE_PYTHON_DOCOPT=y
BR2_PACKAGE_PYTHON_DPKT=y
BR2_PACKAGE_PYTHON_ECDSA=y
BR2_PACKAGE_PYTHON_ENUM=y
BR2_PACKAGE_PYTHON_FLASK_BABEL=y
BR2_PACKAGE_PYTHON_FLASK_JSONRPC=y
BR2_PACKAGE_PYTHON_FLASK_LOGIN=y
BR2_PACKAGE_PYTHON_FLUP=y
BR2_PACKAGE_PYTHON_GOBJECT=y
BR2_PACKAGE_PYTHON_GUNICORN=y
BR2_PACKAGE_PYTHON_HTML5LIB=y
BR2_PACKAGE_PYTHON_HTTPLIB2=y
BR2_PACKAGE_PYTHON_HUMANIZE=y
BR2_PACKAGE_PYTHON_ID3=y
BR2_PACKAGE_PYTHON_INIPARSE=y
BR2_PACKAGE_PYTHON_IOWAIT=y
BR2_PACKAGE_PYTHON_IPADDR=y
BR2_PACKAGE_PYTHON_IPY=y
BR2_PACKAGE_PYTHON_IPYTHON=y
BR2_PACKAGE_PYTHON_JSON_SCHEMA_VALIDATOR=y
BR2_PACKAGE_PYTHON_KEYRING=y
BR2_PACKAGE_PYTHON_LIBCONFIG=y
BR2_PACKAGE_PYTHON_LMDB=y
BR2_PACKAGE_PYTHON_LXML=y
BR2_PACKAGE_PYTHON_MAD=y
BR2_PACKAGE_PYTHON_MARKDOWN=y
BR2_PACKAGE_PYTHON_MELD3=y
BR2_PACKAGE_PYTHON_MISTUNE=y
BR2_PACKAGE_PYTHON_MSGPACK=y
BR2_PACKAGE_PYTHON_MUTAGEN=y
BR2_PACKAGE_PYTHON_MWSCRAPE=y
BR2_PACKAGE_PYTHON_NETADDR=y
BR2_PACKAGE_PYTHON_NETIFACES=y
BR2_PACKAGE_PYTHON_NFC=y
BR2_PACKAGE_PYTHON_NUMPY=y
BR2_PACKAGE_PYTHON_PAHO_MQTT=y
BR2_PACKAGE_PYTHON_PAM=y
BR2_PACKAGE_PYTHON_PARAMIKO=y
BR2_PACKAGE_PYTHON_PILLOW=y
BR2_PACKAGE_PYTHON_POSIX_IPC=y
BR2_PACKAGE_PYTHON_PSUTIL=y
BR2_PACKAGE_PYTHON_PUDB=y
BR2_PACKAGE_PYTHON_PYCLI=y
BR2_PACKAGE_PYTHON_PYCPARSER=y
BR2_PACKAGE_PYTHON_PYELFTOOLS=y
BR2_PACKAGE_PYTHON_PYFTPDLIB=y
BR2_PACKAGE_PYTHON_PYGAME=y
BR2_PACKAGE_PYTHON_PYGAME_IMAGE=y
BR2_PACKAGE_PYTHON_PYGAME_EXAMPLES=y
BR2_PACKAGE_PYTHON_PYGAME_FONT=y
BR2_PACKAGE_PYTHON_PYGAME_MIXER=y
BR2_PACKAGE_PYTHON_PYINOTIFY=y
BR2_PACKAGE_PYTHON_PYLIBFTDI=y
BR2_PACKAGE_PYTHON_PYMYSQL=y
BR2_PACKAGE_PYTHON_PYPARTED=y
BR2_PACKAGE_PYTHON_PYPCAP=y
BR2_PACKAGE_PYTHON_PYQRCODE=y
BR2_PACKAGE_PYTHON_PYRATEMP=y
BR2_PACKAGE_PYTHON_PYRO=y
BR2_PACKAGE_PYTHON_PYROUTE2=y
BR2_PACKAGE_PYTHON_PYSENDFILE=y
BR2_PACKAGE_PYTHON_PYSMB=y
BR2_PACKAGE_PYTHON_PYSNMP_APPS=y
BR2_PACKAGE_PYTHON_PYSNMP_MIBS=y
BR2_PACKAGE_PYTHON_PYSOCKS=y
BR2_PACKAGE_PYTHON_PYTABLEWRITER=y
BR2_PACKAGE_PYTHON_PYTRIE=y
BR2_PACKAGE_PYTHON_PYUSB=y
BR2_PACKAGE_PYTHON_PYXB=y
BR2_PACKAGE_PYTHON_PYZMQ=y
BR2_PACKAGE_PYTHON_REQUESTS_TOOLBELT=y
BR2_PACKAGE_PYTHON_RPI_GPIO=y
BR2_PACKAGE_PYTHON_RTSLIB_FB=y
BR2_PACKAGE_PYTHON_SDNOTIFY=y
BR2_PACKAGE_PYTHON_SERIAL=y
BR2_PACKAGE_PYTHON_SETPROCTITLE=y
BR2_PACKAGE_PYTHON_SH=y
BR2_PACKAGE_PYTHON_SHUTILWHICH=y
BR2_PACKAGE_PYTHON_SIMPLEJSON=y
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
BR2_PACKAGE_PYTHON_SOCKETIO=y
BR2_PACKAGE_PYTHON_SORTEDCONTAINERS=y
BR2_PACKAGE_PYTHON_SPIDEV=y
BR2_PACKAGE_PYTHON_THRIFT=y
BR2_PACKAGE_PYTHON_TOMAKO=y
BR2_PACKAGE_PYTHON_TREQ=y
BR2_PACKAGE_PYTHON_U_MSGPACK=y
BR2_PACKAGE_PYTHON_UBJSON=y
BR2_PACKAGE_PYTHON_UJSON=y
BR2_PACKAGE_PYTHON_URLLIB3=y
BR2_PACKAGE_PYTHON_VERSIONTOOLS=y
BR2_PACKAGE_PYTHON_WATCHDOG=y
BR2_PACKAGE_PYTHON_WEB2PY=y
BR2_PACKAGE_PYTHON_WEBPY=y
BR2_PACKAGE_PYTHON_WHOOSH=y
BR2_PACKAGE_PYTHON_WS4PY=y
BR2_PACKAGE_PYTHON_WSACCEL=y
BR2_PACKAGE_PYTHON_XLUTILS=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-treq package lists the incremental Python module as part of
its setup_requires variable in setup.py, so it must be added as a host
dependency of the python-treq package to avoid build failures.
So far, this issue wasn't visible because python-treq selects
python-twisted, which itself selects the target python-incremental
package. Because python-incremental was before python-treq in the
alphabetic ordering, it was always built before python-treq. And due
to the fact that PYTHONPATH currently contains the directory with
target Python modules, the host Python interpreter was happily using
the target python-incremental while running on the host. But as we are
going to clean up PYTHONPATH, this will no longer be the case, and
hence python-treq needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-json-schema-validator does not need versiontools on the target,
but only on the host, as it's listed in setup_requires in setup.py.
This was not noticed so far because host Python interpreter is started
with a PYTHONPATH that contains a directory with target Python
packages, so versiontools was found there. But as we are about to fix
PYTHONPATH to no longer include such a directory,
python-json-schema-validator would fail due to versiontools being
missed on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-u-msgpack can use setuptools instead of distutils, and
using setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyro can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyasn can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Main difference is that the drm driver now supports the hdmi output.
The gxl variant device tree has been renamed in:
commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date: Fri Jan 20 07:57:52 2017 -0800
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
name in the DTS filename for clarity. Rename this file accordingly to
be consistent with the rest of the GXL DTS files.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
So adjust the defconfig and boot script to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though PyPI says the license is BSD, GitHub repo has an MIT license
file since April 2017 and upstream setup.py was also fixed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the following patches:
* the Xtensa patches 870 and 871 are upstream now
* patch 942 was backported to GCC 6 branch
Note, that a bz2 release tarball is not provided anymore and is replaced by
a xz tarball file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libssh2 support mbedtls as crypto back-end library since version 1.8.0.
Default to mbedtls since it's smaller than either libgcrypt or openssl.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
- Extend pow tables for layer III to properly handle files with i-stereo and
5-bit scalefactors. Never observed them for real, just as fuzzed input to
trigger the read overflow. Note: This one goes on record as CVE-2017-11126,
calling remote denial of service. While the accesses are out of bounds for
the pow tables, they still are safely within libmpg123's memory (other
static tables). Just wrong values are used for computation, no actual crash
unless you use something like GCC's AddressSanitizer, nor any information
disclosure.
- Avoid left-shifts of negative integers in layer I decoding.
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop CVE 2017-9868 patch as that is now upstream.
1.4.14 is a bugfix release, fixing significant websocket performance /
correctness issues.
Use HTTPS for the download as the server uses HSTS, thus saving a redirect.
While we're at it, add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-7890 - Buffer over-read into uninitialized memory. The GIF
decoding function gdImageCreateFromGifCtx in gd_gif_in.c (which can be
reached with a call to the imagecreatefromstring() function) uses
constant-sized color tables of size 3 * 256, but does not zero-out these
arrays before use.
CVE-2017-9224, CVE-2017-9226, CVE-2017-9227, CVE-2017-9228, CVE-2017-9229 -
Out-of-bonds access in oniguruma regexp library.
CVE-2017-11144 - In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before
7.1.7, the openssl extension PEM sealing code did not check the return value
of the OpenSSL sealing function, which could lead to a crash of the PHP
interpreter, related to an interpretation conflict for a negative number in
ext/openssl/openssl.c, and an OpenSSL documentation omission.
CVE-2017-11145 - In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before
7.1.7, lack of a bounds check in the date extension's timelib_meridian
parsing code could be used by attackers able to supply date strings to leak
information from the interpreter, related to an ext/date/lib/parse_date.c
out-of-bounds read affecting the php_parse_date function.
CVE-2017-11146 - In PHP through 5.6.31, 7.x through 7.0.21, and 7.1.x
through 7.1.7, lack of bounds checks in the date extension's
timelib_meridian parsing code could be used by attackers able to supply date
strings to leak information from the interpreter, related to
ext/date/lib/parse_date.c out-of-bounds reads affecting the php_parse_date
function. NOTE: this vulnerability exists because of an incomplete fix for
CVE-2017-11145.
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patches fixing the following security issues:
CVE-2017-10971:
The endianess handling for X Events assumed a fixed size of X Event structures and
had a specific 32 byte stack buffer for that.
However "GenericEvents" can have any size, so if the events were sent in the wrong
endianess, this stack buffer could be overflowed easily.
So authenticated X users could overflow the stack in the X Server and with the X
server usually running as root gaining root prileveges.
CVE-2017-10972:
An information leak out of the X server due to an uninitialized stack area when swapping
event endianess.
For more details, see the advisory:
http://www.openwall.com/lists/oss-security/2017/07/06/6
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit b78b50465c, the initialisation
of BRTest.builddir was moved to the __init__ function. However, it is
set based on BRTest.outputdir and that is only set when the -o argument
is given to run-tests. When called as "run-tests -l", there is no -o
argument so BRTest.outputdir remains unset.
To fix, keep BRTest.builddir at None when BRTest.outputdir is None.
While we're at it, drop the direct access to the class member. If a
subclass wishes to set outputdir to something else before calling
BRTest.__init__, they are free to do so.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes no sense to default to an arbitrary path. In addition, it in
fact works correctly when it is empty. In that case, the toolchain will
be searched in PATH.
Update the help text to explain the above, and also that the compiler
is supposed to be in the bin subdirectory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BRTest's setUp() method contains a few assignments that initialize its
member variables. Since we will want to use these in test case
overrides, move them to the __init__ function.
Also allow the config member to be overridden, rather than always
taking the class member.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 14151d77af that eliminated
$(HOST_DIR)/usr seriously missed the toolchain-wrapper - only a single
reference was updated, the other three were missed. Commit
015d68c84c removed one more. This commit
finally removes the two remaining ones.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up to now we created the $(HOST_DIR)/usr compatibility symlink as part
of the creation of $(HOST_DIR) itself. However, when the user specifies
a custom BR2_HOST_DIR, it is possible that the directory already exists
so this rule will never trigger.
Therefore, add an explicit rule for creating $(HOST_DIR)/usr and add
this rule to the dependencies of the dirs target. HOST_DIR itself goes
back to the standard rule for directories. The order-only dependency of
STAGING_DIR isn't needed any more either: HOST_DIR is implicitly
created if needed by mkdir -p, and we don't need to trigger the
HOST_DIR rule any more if the directory already exists.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tarballs of the releases are now again available:
https://www.spinics.net/lists/linux-i2c/msg30349.html
So change back to that instead of getting the source code from git.
While we're at it, add a hash for the license file.
[Peter: Also update Config.in homepage URL as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We had several remarks on the mailing list of users that were surprised
that patches were not applied for packages whose SITE_METHOD is local.
So document this.
Note that for OVERRIDE_SRCDIR itself it is already documented:
When Buildroot finds that for a given package, an
<pkg>_OVERRIDE_SRCDIR has been defined, it will no longer attempt to
download, extract and patch the package. Instead, it will directly use
the source code available in in the specified directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to U-Boot before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to linux before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be interesting to get the overlay from a remote server, rather
than expect it to be present locally.
Since that file can be any URL, we can't know its hash, so we just
exclude it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
[Thomas: use DL_DIR instead of BR2_DL_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently, specifying a custom Xtrensa core is done with two variables:
- the core name
- the directory containing the overlay tarball
However, the core name only serves to construct the tarball name, and is
not used whatsoever to configure any of the toolchain components
(binutils, gcc or gdb), except through the files that are overlayed in
their respective source trees.
This has two main drawbacks:
- the overlay file must be named after the core,
- the tarball can not be compressed.
Furthermore, it also makes it extremely complex to implement a download
of that tarball.
So, those two variables can be squeezed into a single variable, that is
the complete path of the overlay tarball.
Update the qemu-xtensa defconfig accordingly.
Note: we do not add a legacy entry for BR2_XTENSA_CORE_NAME, since it
was previously a blind option in the last release, and there's been no
release since we removed BR2_XTENSA_CUSTOM_NAME. So, we just update the
legacy comments for BR2_XTENSA_CUSTOM_NAME, since that's all the user
could have seen in any of our releases so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not needed to have an intermediate blind option, we can just
hide the prompt behind the same dependency as the non-blind symbol.
Update our qemu-xtensa defconfig acordingly (note: it was using
different values for both options, which is not possible; the blind
option was just set to the non-blind one in the .config).
Also remove an unneeded empty default for the BR2_XTENSA_OVERLAY_DIR
string option (strings are empty by default).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change deprecates the ext2/3/4 rootfs size in blocks symbol in
favor of one that mimic the fs-size argument behavior of mkfs (i.e.
size in a human readable format accepting k, m, g or t suffix or their
upper-case variants).
This change also updates the defconfigs that used to set
BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libressl is a fork of openssl from OpenSSL in 2014. Its goal is to
modernize the OpenSSL codebase, improve security, and apply best
practice development processes.
Right now, libressl is API compatible with OpenSSL 1.0.1, but does not
yet include all new APIs from OpenSSL 1.0.2 and later.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the advisory:
https://irssi.org/security/irssi_sa_2017_07.txt
Two vulnerabilities have been located in Irssi.
(a) When receiving messages with invalid time stamps, Irssi would try
to dereference a NULL pointer. Found by Brian 'geeknik' Carpenter
of Geeknik Labs. (CWE-690)
CVE-2017-10965 [2] was assigned to this bug
(b) While updating the internal nick list, Irssi may incorrectly use
the GHashTable interface and free the nick while updating it. This
will then result in use-after-free conditions on each access of
the hash table. Found by Brian 'geeknik' Carpenter of Geeknik
Labs. (CWE-416 caused by CWE-227)
CVE-2017-10966 [3] was assigned to this bug
Impact
------
(a) May result in denial of service (remote crash).
(b) Undefined behaviour.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While building I noticed:
>>> host-ccache 3.3.4 Building
conf.c: In function 'conf_create':
conf.c:314:2: warning: too many arguments for format [-Wformat-extra-args]
conf->cache_dir = format("/home/peko/.buildroot-ccache", get_home_directory());
^
As host-ccache gets installed into $(HOST_DIR) and is part of the SDK,
hardcoding the build user homedir isn't really nice for the relocatable
SDK feature (or simply for a SDK used by multiple users).
As the warning shows, CCache replaces "%s" with the current user home
directory, so rewrite BR_CACHE_DIR to use this feature if it begins with
$HOME.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We no longer have automatic derivation of DEPENDENCIES for host
packages, so the comment that we don't want a host-busybox dependency
is no longer valid.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing the option --shebangdir=/usr/bin to the configuration script adds the
CPP definition EXECLINE_SHEBANGPREFIX to
execline-x.y.z/src/include/execline/config.h. It is used by `s6-rc-compile` from
the s6-rc package to set the path to the execline interpreter in the scripts it
generates.
So, when building the host variant of execline, this path will be used in the
target service scripts generated by the host variant of `s6-rc-compile`. If not
forced to /usr/bin, the location of the execline interpreter on the target, it
will default to $(HOST_DIR)/bin thus leading to non-working scripts on the
target.
So, restore this option for the host variant.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since mtd was converted to the package infrastructure in commit
de4cf4e913 ("mtd: convert to gentargets,
add host package"), its host variant depended on host-e2fsprogs. At
the time, only a host variant of the mtd package was available.
When a target variant of mtd was introduced in commit
b50e0fa113 ("mtd: add option to build
mkfs.ubifs for target"), it depended on util-linux.
So today, the target variant continues to depend on util-linux, while
the host variant depends on e2fsprogs. What mkfs.ubifs really needs
is libuuid, which is provided by util-linux. It was in fact provided
by the fact that host-e2fsprogs depends on host-util-linux.
But really, host-e2fsprogs is not needed as a dependency, so use
host-util-linux to be consistent with the target variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain wrapper, when called through PATH, strips the last three
levels of /proc/self/exe to find HOST_DIR. However, after the host/usr
removal, this should be just two levels.
The toolchain wrapper has different logic for when it is called with a
full path (i.e. $HOST_DIR/usr/bin/arm-linux-gcc) then when it is called
through the PATH (i.e. just arm-linux-gcc). The latter is never used
internally in Buildroot, that's why this wasn't discovered through
testing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Mark Jackson <mpfj-list@newflow.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libgrcrypt is a direct dependency of WebKitGTK+, and as such it
should be selected.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add missing dependency on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is needed for correctly building some CMake-based packages which
use this variable. For example, this is needed for WebKitGTK+ 2.16.x
to build correctly when an ARMv8 target is configured.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This file is not a package per-se, it includes other .mk files that
are packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The waf package infrastructure was not known by the pkg-stats script,
so let's add it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With 2000+ packages it's not trivial to identify i.e.:
- all packages that don't have a hash file;
- all packages that have patches;
- all packages that have code style warnings;
User experience can be improved by dynamically sorting the resulting
table.
There is an open-source solution that does that in the client-side and
requires minimal changes to our script: sorttable.js. The script is
MIT licensed as stated in its website.
Also add a hint to the user that the table can be sorted.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there is quite some duplication in the variables to be passed in
the make environment and as make options between the build and install
steps, this commit introduces LINUXPTP_MAKE_ENV and LINUXPTP_MAKE_OPTS
to avoid the duplication.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
incdefs.sh try to define some flags with user_flags() and kernel_flags()
functions. The later is looking at the kernel headers installed on the host
when KBUILD_OUTPUT is not set. If no kernel headers are installed on the host,
the grep fail and HAVE_ONESTEP_SYNC is not set on the command line:
see: grep: /usr/include/linux/net_tstamp.h: No such file or directory
So the missing.h define HWTSTAMP_TX_ONESTEP_SYNC which is also present in the
kernel headers installed in STAGING_DIR (toolchain w/ headers >= 3.2).
Indeed KBUILD_OUTPUT is empty because it's reset in the makefile, so move
KBUILD_OUTPUT in the enviroment while calling "make"/
Also set KBUILD_OUTPUT to STAGING_DIR to find net_tstamp.h.
While at it, use the same arguments for BUILD_CMDS and
INSTALL_TARGET_CMDS.
Thanks to Yann for the live review during the Buildroot summer camp.
Fixes:
http://autobuild.buildroot.net/results/364/36470db2c262d2e1fda5144a08cfe221831e093e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Petr Kulhavy <brain@jikos.cz>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The XVISOR_ARCH check added in commit
117fd5dfbc ("xvisor: fix build on
AArch64") broke Buildroot entirely on all architectures except ARM,
AArch64 and x86-64, because the $(error ...) test was not enclosed
inside a condition that made sure the xvisor package was enabled.
This commit fixes that, and allows Buildroot to be usable again on all
architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 32bec8ee2f
("toolchain-external: copy ld*.so* for all C libraries") we changed
how the musl dynamic linker symbolic link was being created. Instead
of having specific logic in Buildroot, we switched to simply copying
the ld*.so.* symbolic link from staging to target, as well as the
target of this symbolic link.
However, it turns out that by default, musl creates its dynamic linker
symbolic link with an absolute path as the target of the link:
/lib/libc.so.
Therefore, external Musl toolchains built with Buildroot look like
this:
lrwxrwxrwx 1 thomas thomas 12 Jul 4 19:46 ld-musl-armhf.so.1 -> /lib/libc.so
The principle of the copy_toolchain_lib_root function, which is used
to copy libraries from staging to target, is to copy symbolic links
and follow their targets. In this case, it means we end up copying
/lib/libc.so (from the host machine) into the target folder. From
there on, there are two cases:
1. /lib/libc.so exists in your host system. It gets copied to the
target. But later on, Buildroot also copies /lib/libc.so from
staging to target, overwriting the bogus libc.so. So everything
works fine, even though it's admittedly ugly.
2. /lib/libc.so doesn't exist in your host system. In this case, the
build fails with no clear error message.
This problem does not happen with Musl toolchains built by
Crosstool-NG, because Crosstool-NG replaces the absolute target of the
dynamic linker symbolic link by a relative path.
However, since we want to support existing Buildroot Musl toolchains
and generally work with the fact that Musl by default installs an
absolute symlink, the following commit improves the
copy_toolchain_sysroot function to replace symbolic links with an
absolute destination to use a relative destination. I.e, in staging,
the ld-musl-armhf.so.1 symbolic link looks like this:
lrwxrwxrwx 1 thomas thomas 14 Jul 5 22:59 output/staging/lib/ld-musl-armhf.so.1 -> ../lib/libc.so
Fixes:
http://autobuild.buildroot.net/results/ce80264575918a8f71d9eab1091c21df85b65b1a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xvisor was failing to build on AArch64 with:
package/xvisor/xvisor.mk:60: *** No Xvisor defconfig name specified, check your BR2_PACKAGE_XVISOR_DEFCONFIG setting. Stop.
The first problem is that the Config.in file had a typo: it was using
BR2_AARCH64 instead of BR2_aarch64, and therefore the
BR2_PACKAGE_XVISOR_DEFCONFIG variable had no value.
Once this is fixed, another problem occurs: the ARCH variable needs to
be specified as "arm" for XVisor, for both ARM and AArch64. Therefore,
a XVISOR_ARCH variable is introduced, which is calculated according to
the Buildroot configuration options. Only x86-64, arm and aarch64 are
supported by Xvisor currently, so it remains simple.
Fixes:
http://autobuild.buildroot.net/results/1719a63ff257f13634a06a14327abfb327984101/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b3cc7e65ee, the definition of the DESTDIR variable was moved
down into the loop that follows symlinks in the libraries that are
copied to target. However, the corresponding mkdir was not moved down,
so that no directories are ever created.
In practice, this mkdir is normally redundant since the directories
should already have been created as part of creating STAGING_DIR.
Still, the current situation is clearly wrong, so fix it by moving the
mkdir down to after the assignment to DESTDIR.
While we're at it, also remove a redundant empty line. It's a leftover
from when a lot of variables were declared above.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simply updates to the latest stable release. WebKitGTK+ versions
in the 2.1x series avoid bumping the dependencies in order to allow
distributions to provide updates, therefore no new dependencies are
needed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now all packages have been updated to install things in $(HOST_DIR)/lib
instead of $(HOST_DIR)/usr/lib, there should no longer be any reason
to have $(HOST_DIR)/usr/lib in the RPATH, so we don't allow it any more.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tools are now installed in host/bin instead of host/usr/bin.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This silences the annoying warning that there is no hash file for our
own COPYING file.
Also change the message so that it is more obvious what we're doing.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build passes the --shebangdir configure option, the target
build doesn't. With the removal of $(HOST_DIR)/usr, it is not clear
if this should be /bin or /usr/bin or $(HOST_DIR)/bin. Looking at the
source code, it turns out that this variable is not used at all, and
/usr/bin doesn't appear anywhere in the installed files.
Since it is not clear what this option should be set to, and it
anyway doesn't do anything, remove it entirely.
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
policycoreutils has a pretty peculiar interpretation of DESTDIR and
PREFIX. PREFIX is not consistently used: some installation paths and
include paths are forced to $(DESTDIR)/usr/... . In other cases,
PREFIX is indeed used. PREFIX defaults to $(DESTDIR)/usr
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: some things are
still installed in $(HOST_DIR)/usr - but nothing we care about (just
manpages, systemd services, ...). More importantly, however, it still
looks for e.g. D-Bus in $(DESTDIR)/usr/include/dbus-1.0.
Still, it's better than nothing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
checkpolicy has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX simply defaults to $(DESTDIR)/usr, and is used in the rest of
the build system. DESTDIR isn't used any further.
For the host installation, we don't want the usr part, so set PREFIX
instead of DESTDIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libselinux has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . In other cases, PREFIX is indeed used. PREFIX
defaults to $(DESTDIR)/usr.
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: man pages are
still installed in $(HOST_DIR)/usr - but we don't care about that.
Also simplify the symlink creation, like how it's done in libsepol.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsemanage has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . In other cases, PREFIX is indeed used. PREFIX
defaults to $(DESTDIR)/usr
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: man pages are
still installed in $(HOST_DIR)/usr - but we don't care about that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 builds for the target but installs with DESTDIR=$(HOST_DIR). Since
we set prefix to /usr in TARGET_CONF_OPTS, this results in installing
things in $(HOST_DIR)/usr.
To make sure we don't install in $(HOST_DIR)/usr, override --prefix and
--exec-prefix.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have a patch that adds $(DESTDIR) to the install commands of
raspberrypi-usbboot, but it would still be installed in $(DESTDIR)/usr.
We don't want that, so remove the /usr part in the installation
commands.
Note that upstream has removed the 'install' target entirely, so
there's no point trying to keep the patch in upstreamable shape (i.e.
defaulting DESTDIR to /usr).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
genromfs is special because it uses "PREFIX" in the meaning of DESTDIR
and "prefix" in the meaning of prefix. We were up to know using it
incorrectly for host: PREFIX shouldn't be set and only prefix should
be set.
Add an explanatory comment for this unusual behaviour.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\$(HOST_DIR)/usr%$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/share' | xargs sed -i 's%$(HOST_DIR)/usr/share%$(HOST_DIR)/share%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/include' | xargs sed -i 's%$(HOST_DIR)/usr/include%$(HOST_DIR)/include%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/lib' | xargs sed -i 's%$(HOST_DIR)/usr/lib%$(HOST_DIR)/lib%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/sbin' | xargs sed -i 's%$(HOST_DIR)/usr/sbin%$(HOST_DIR)/sbin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\(prefix\|PREFIX\)=\("\?\)\$(HOST_DIR)/usr%\1=\2$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FEATURE_CLEAN_UP is a configuration feature to get busybox to explicitly
call free() on dynamic allocated memory just before exiting so memory leak
detectors like valgrind don't get confused. Upstream explicitly recommends
to NOT enable this option:
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
As a size optimization, busybox normally exits without explicitly
freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
Having this option enabled adds a bit of bloat, but more significantly these
cleanup code paths don't get tested very often so some times get out of sync
with the allocation code which can lead to crashes (or security issues from
double frees), so it is safer to disable the option.
For people wanting to debug memory leak issues with busybox, the option can
still be enabled with a configuration fragment (or a custom config).
The size difference isn't huge (br-arm-full-static):
-rwxr-xr-x 1 peko peko 886K Jul 5 10:56 output-busybox1/target/bin/busybox
-rwxr-xr-x 1 peko peko 882K Jul 5 10:53 output-busybox2/target/bin/busybox
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In copy_toolchain_sysroot, if no ld.so has been found in the
STAGING_DIR after the sysroot copy, we look at ARCH_SYSROOT_DIR if a
ld.so is available there. We do this for both ld*.so and ld*.so.*.
However, when copying thing from staging to target (as listed in
TOOLCHAIN_EXTERNAL_LIBS), we only match on ld*.so.*. This would mean
that even if a dynamic linker matching ld*.so but not ld*.so.* was
copied into staging by copy_toolchain_sysroot, it would anyway not be
copied to the target filesystem, making the system unusable.
Therefore, we can remove the special case on ld*.so, and keep only
ld*.so.*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgcc_s.so is now added to TOOLCHAIN_EXTERNAL_LIBS for glibc/uclibc
in one place, and for musl in another place. Bottom line: it should be
in TOOLCHAIN_EXTERNAL_LIBS unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These tests simply build a system with musl and uclibc toolchains, and
boot them under qemu. It allows to minimally validate that our support
for musl/uclibc external toolchains is working. We already had some
tests covering glibc toolchains, so we can now easily test that all
three C libraries are supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit is part of the series, as I've written/used those tests to
validate that things are still working correctly with all of glibc,
uclibc and musl toolchains.
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
$(PKG)_ERLANG_LIBDIR is problematic because it is used both for host
and staging/target. Therefore, the usr/ part is removed from it, and
added the the callers instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of python packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of autotools packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/lib and $(HOST_DIR)/usr/lib are the same directory, it
doesn't make sense to pass both to LDFLAGS.
Also use $(HOST_DIR)/lib instead of $(HOST_DIR)/usr/lib for the RPATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since $(HOST_DIR)/usr/{bin,sbin} are now symlinks to
$(HOST_DIR)/{bin,sbin}, it makes no sense to check them - they are
already covered.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into $(HOST_DIR)/usr/lib without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/lib to ../lib.
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we also have to update the
check-host-rpath script to accept both $(HOST_DIR)/usr/lib and
$(HOST_DIR)/lib, because depending on how the package derives the
path, it may be different.
Since there are some dependency chains that involve $(STAGING_DIR),
$(STAGING_DIR) may in fact be created before $(HOST_DIR). Since
$(STAGING_DIR) is a subdirectory of $(HOST_DIR), it is possible that the
newly added rule for $(HOST_DIR) never triggers. To make sure that the
rule does trigger, add an order-only dependency from $(STAGING_DIR) to
$(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into
$(HOST_DIR)/usr/$(GNU_TARGET_NAME) (i.e., binutils and gcc) without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/$(GNU_TARGET_NAME) to
../$(GNU_TARGET_NAME).
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
Effectively, the usr/ part is removed from $(STAGING_SUBDIR) (and
therefore from $(STAGING_DIR)), so update the definition of that
variable right away.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gettext revamp has some user-visible changes, so this commit
updates the CHANGES file to document them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The way gettext is handled in Buildroot has significantly changed,
with changes visible to packages. This commit updates the relevant
section of the manual to document how packages should now interact
with the gettext support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that all packages have been migrated to the new gettext logic, we
can remove the BR2_NEEDS_GETTEXT and BR2_NEEDS_GETTEXT_IF_LOCALE
variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
patch and special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Patch
0001-Makefile-fix-static-linking-issue-with-lintl.patch was added to
allow passing -lintl through LIBS, in a place that works for static
linking.
However, for dynamic linking, we can simply pass -lintl through the
existing LDFLAGS variable, as it was done prior to commit
38bfd129c6 ("package/net-tools: fix
static linking issue with lintl").
This commit does that and gets rid of the now useless patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code in e2fsprogs that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection, which means we no longer
need to depend on BR2_USE_WCHAR, so this dependency is dropped
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Carlos Santos <casantos@datacom.ind.br>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- pass --with-libintl-prefix only when a separate libintl library is
available
- dropping BR2_PACKAGE_GETTEXT selection
- removing a musl-specific workaround. Indeed, when NLS is enabled,
we now have the full-blown libintl, even with the musl C library
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection. Thanks to this, we can drop
the BR2_USE_WCHAR dependency
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
whether NLS support is enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection. The BR2_USE_WCHAR
dependency was only needed for gettext, so it is no longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is not needed: libbfd is now properly linked against libintl, so
libintl is pulled in automatically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection. We adjust the comment
explaining the BR2_USE_WCHAR dependency, since gettext is no longer
the reason for this dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies on
gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies on
gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
The BR2_USE_WCHAR dependency was needed for gettext, now that we no
longer need gettext, we can also get rid of this dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of relying on binutils
depending on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
In addition, we now use BR2_SYSTEM_ENABLE_NLS instead of
BR2_ENABLE_LOCALE to decide if NLS support should be enabled or
disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
The BR2_USE_WCHAR dependency was only needed for gettext. But now, we
no longer need gettext unconditionally, so this dependency on
BR2_USE_WCHAR is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit uses TARGET_NLS_DEPENDENCIES instead of existing logic to
add the dependency on gettext. To keep the existing behavior, we keep
the --with-libintl-prefix option, but only when a libintl library is
effectively provided by gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl. This wasn't
done so far, but is needed for the build to work, because uClibc
now has a stub gettext implementation, which is mistaken as being
the full gettext implementation by the configure script
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Note that -lpthread is no longer needed for -lintl, but axel uses
pthread directly anyway, so we have to keep -lpthread as part of
LDFLAGS.
Finally, we now use BR2_SYSTEM_ENABLE_NLS to decide whether NLS
support should be enabled or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The build system use PKG_CHECK_MODULES.
checking pkg-config is at least version 0.9.0... ./configure: line 16886: output/host/usr/bin/pkg-config: No such file or directory
no
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfs is now capable of generating rootfs images. Use mkfs instead of
genext2fs.
If not set, we now let mkfs calculate the block size and the number of
inodes needed.
This change also adjusts the options to meet those of mkfs.
Notes:
* Passing a null inode number to mkfs triggers its automatic calculation.
* Passing a fs-size with no unit suffix to mkfs is interpreted as using
1K block size.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: don't pass PATH when calling mkfs.ext, just call it directly
from $(HOST_DIR)/usr/sbin, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Soon, the ext{2,3,4} rootfs image will no longer be generated with
genext2fs, but using mke2fs instead which has no support for the extra
inode number option.
So, deprecate the BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES option and
recommend, in lieu, to set the total inode number, taking account of
the extra ones if needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the stdout and stderr streams are redirected, it is not
immediately obvious when a build failed, even though brmake really exits
with the same error code as make did.
When there is an error, print the exit code after the elapsed time.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ifupdown scripts can be used independently of the init system, be it
sysv, busybox or systemd; they could even be used when there is no init
system (i.e. the user is providing his own).
Currently, those ifupdown scripts are bundled in the skeleton.
But we soon will have a skeleton specific to systemd, so we would be
missing those scripts (when systemd-networkd is not enabled).
So, move those scripts to their own package.
To keep the current behaviour (before it is changed in future commits),
we make that package default to y, but depend on the default skeleton.
Instead of being a target-finalize hook, the scripts are installed as
any other package are, with a package install-target command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop empty IFUPDOWN_SCRIPTS_SOURCE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we had no support for full NLS with the musl C library:
BR2_NEEDS_GETTEXT was only true for uClibc. But the musl C library
provides a stub gettext implementation, which some packages were
failing to recognize as being usable, and therefore we are passing
autoconf cache variables to hint those packages that yes, the C
library has a usable gettext implementation.
However, we are going to enable full NLS support for musl, by giving
the possibility to build gettext libintl with musl. In such a case, we
do not want packages to use the gettext implementation of the C
library, but really the one provided by gettext libintl.
Therefore, we should only pre-seed the
gt_cv_func_gnugettext1_libc*=yes variables if we're on musl but
without gettext libintl. Otherwise packages will fail building because:
- libintl.h is the one from the full-blown gettext implementation, so
it assumes the package will link against -lintl
- the package thinks gettext is provided by the C library, so it
doesn't link with -lintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All packages that can use NLS support will have to depend on
host-gettext, as it provides the tools for generating .mo files from
.po files.
In addition, all packages may need to depend on gettext (and link with
-lintl) if the full-blown gettext implementation is provided by
libintl and not by the C library.
In order to avoid repeating such conditions everywhere, this commit
introduces two variables:
- TARGET_NLS_DEPENDENCIES, which packages that may use NLS support
should unconditionally add to their <pkg>_DEPENDENCIES variable.
- TARGET_NLS_LIBS, which packages can use to pass through LIBS or
LDFLAGS when the package build system needs help to realize that it
should link against libintl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the option BR2_ENABLE_LOCALE was more-or-less controlling
whether NLS support was enabled in packages. More precisely, if
BR2_ENABLE_LOCALE=y, we were not doing anything (so some packages
could have NLS support enabled, some not). And only when
BR2_ENABLE_LOCALE was disabled we were explicitly passing
--disable-nls to packages.
This doesn't make much sense, and there is no reason to tie NLS
support to locale support. You may want locale support, but not
necessarily NLS support. Therefore, this commit introduces
BR2_SYSTEM_ENABLE_NLS, which allows to enable/disable NLS support
globally. When this option is enabled, we pass --enable-nls to
packages, otherwise we pass --disable-nls.
In addition, when this option is enabled and the C library doesn't
provide a full-blown implementation of gettext, we select the gettext
package, which will provide the full blown implementation.
It is worth mentioning that this commit has a visible impact for users:
- Prior to this commit, as soon as BR2_ENABLE_LOCALE=y, packages
*could* provide NLS support. It was up to each package to decide
whether they wanted to provide NLS support or not (we were not
passing --enable-nls nor --disable-nls).
- After this commit, it's BR2_SYSTEM_ENABLE_NLS that controls whether
NLS is enabled or disabled, and this option is disabled by default.
Bottom line: with the default of BR2_SYSTEM_ENABLE_NLS disabled, some
packages may lose NLS support that they used to provide. But we
believe it's a reasonable default behavior for Buildroot, where
generally NLS support is not necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to use DISABLE_NLS not only for disabling NLS support,
but also to explicitly enable it. Therefore, this preparatory commit
renames it to NLS_OPTS, which is consistent with other foo_OPTS
variables defined in package/Makefile.in.
While at it, we replace the := assignments by regular = assignments.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces a hidden option
BR2_PACKAGE_GETTEXT_PROVIDES_INTL that is used by gettext.mk to force
the build of libintl if the toolchain doesn't provide a full gettext
implementation.
For now, this hidden option is not selected by anything, but a
follow-up commit will introduce BR2_ENABLE_NLS, which will make use of
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new boolean is true if the toolchain provides a built-in
full-featured implementation of gettext (glibc), and false if only a
stub implementation is provided (uclibc, musl).
This will be used in follow-up commits to decide whether libintl needs
to be built by gettext or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to avoid having to bring libintl from gettext whenever you
want to build a program that needs it, uClibc-ng now provides a stub
implementation of the gettext functions in uClibc-ng itself. This
brings uClibc-ng in the same situation as musl.
This will fix a lot of build failures related to static linking with
libintl, and generally is a first step to simplify our gettext
handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ushare is not an autoconf/automake based package, so it does not have
the standard behavior of autoconf that every enable/disable option
supports both --enable-foo and --disable-foo.
For example, it supports --disable-nls, but not
--enable-nls. Currently, DISABLE_NLS is either empty or --disable-nls,
but this will be changed in a follow-up commit. As a preparation, this
commit modifies ushare to no longer use DISABLE_NLS, but instead
calculate itself whether --disable-nls should be passed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to pass --enable-nls to all autotools packages when NLS
support is enabled globally. However, lvm2 NLS support doesn't build,
and anyway lvm2 doesn't provide any useful translation files, so we
force disable NLS support for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment that explains why we were defining HOST_FLEX_DEPENDENCIES
instead of inheriting from FLEX_DEPENDENCIES no longer makes sense,
since we remove such automatic inheritance of host dependencies from
target dependencies a while ago.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, libglib enables some fairly aggressive warnings, treated
as errors. In particular, the -Wformat=2 warning triggers a warning
due to the return value of the ngettext() macro from uClibc libintl
stub not being understood as being potentially a format string.
So, before we enable the stub libintl in uClibc, we disable such
warnings. A bug will be reported to upstream uClibc to get the actual
bug fixed, but disabling compiler warnings treated as errors is anyway
a good thing in the context of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size parameter from sock_recvmsg() was removed from Linux kernel
API since 4.7. This commit adjusts the existing
0004-Port-one-one_udp.c-to-Linux-4.1.patch to fix the build with Linux
>= 4.7.
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
[Thomas: improved commit title/log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file "qt.conf" can be used to override the hard-coded paths that are
compiled into the Qt library. We need it to make "qmake" relocatable.
CC: Julien Corjon <corjon.j@ecagroup.com>
CC: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- use | instead of \ as sed separator, suggested by Arnout.
- fix indentation, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It will install the script "relocate-sdk.sh" in the HOST_DIR
allowing to adjust the path to the SDK directory in all text
files after it has been moved to a new location.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- Fix shebang to be /bin/sh instead of /bin/bash, suggested by Arnout
- Use | instead of \ as a separator for sed expressions, suggested by
Arnout, discussed with Wolfgang and others
- Remove ./ at the beginning of LOCFILE, suggested by Arnout
- Fix comment about the path check being made before doing the
replacement, suggested by Arnout
- Fix indentation, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-8372 - The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to cause a
denial of service (assertion failure and application exit) via a crafted
audio file.
CVE-2017-8373 - The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted audio file.
CVE-2017-8374 - The mad_bit_skip function in bit.c in Underbit MAD libmad
0.15.1b allows remote attackers to cause a denial of service (heap-based
buffer over-read and application crash) via a crafted audio file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove non-existant configure options:
--disable-sphinx-doc:
Even if it looks like there is some code for that in configure.ac, it
seems that is not taken into account and that configure option is not
even recognized.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dtls plugin needs openssl, so move it down to the "plugins with external
dependencies" section to match the rest of the plugins.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove non-existant or unnecessary configure options:
--disable-oggtest, --disable-vorbistest:
It looks like these options will be taken into account by ogg.m4 and
vorbis.m4 only when ogg and vobis are enabled. However, according to
the code on those m4 files these two options are disabled by default.
--disable-gio_unix_2_0:
I don't know where this option comes from.
--disable-freetypetest:
183610c035
[Peter: add rawparse plugin]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the WebRTC plugin option was introduced in commit
ee267886bc ("gst1-plugins-bad: enable
webrtc plugin"), it was incorrect added as "webrtc", while the actual
name of the plugin and corresponding configure option is "webrtcdsp".
This commit therefore fixes the .mk file to use the correct name. And
also, since we want to keep Buildroot option consistent with the name
of the GStreamer plugins, it renames the Config.in option as well, and
introduces the necessary Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though no timezone implicitly means UTC, systemd is not all that
happy when it does not have a timezone set. This is all fine on a RW
filesystem because systemd will create a symlink on its own (to
Etc/UTC), but not so much on a RO filesystem, causing all kind of
issues at boot time (up to the point that the system is unusable).
We fix that by requiring that the timezone is actually set. The check is
done by verifying that the timezone file is an actual file; if not set,
the test would find a directory and would thus fail.
Update the help entry accordingly.
Also fix indentation in tzdata.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Martin Bark <martin@barkynet.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ext filesystems can use a block size of 1024, 2048, or 4096 bytes, the
former being interesting to store small files, while the latter being
more intersting to store bigger files.
So far, we were using the default, which was to use a 1024-byte block.
Continue doing so (for now...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous default, zero, just meant "use the default value of the
filesystem generator", which happened to be 5% (the traditional value
for all ext-creating tools we've ever seen).
So, change the new default accordingly to 5%.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, leaving the number of inodes to be autocalculated requires
the user to not specify the -i option at all.
Also accept zero as meaning auto; this will help simplify the ext2.mk
code a little bit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsepol has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . Also, the shared lib symlink is forced to ../../lib
(i.e. assumes it's installed under /usr). For these reasons, the host
build and install commands are a bit unusual: they use DESTDIR instead
of PREFIX, DESTDIR points to $(HOST_DIR) without /usr, and some
additional fixup is needed to correct the installation directory of
libsepol.so.1 and the symlink to it.
This can be simplified quite a lot by passing both DESTDIR and PREFIX,
and including the /usr part in both. The symlink still has to be fixed,
but that's much simpler.
Note that a side effect is that the man pages are now installed under
$(HOST_DIR)/usr/usr/man. While not very nice, we don't really care
about man pages. In addition, this will resolve itself when we later
move $(HOST_DIR)/usr to $(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes $(1)/$($(PKG)_ERLANG_LIBDIR) is used, sometimes
$(1)$($(PKG)_ERLANG_LIBDIR). Make this consistent, with /. Therefore,
remove the leading / from $($(PKG)_ERLANG_LIBDIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The individual binaries option of busybox allows for the applets
that would usually be symlinks to be built as individual applications
that link against a shared library.
This feature is needed for SELinux to allow the applications to run
under the correct SELinux context.
The patch being added allows the individual applications to be
installed and will be upstreamed to the busybox developers.
The initial work for this change was done by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- add help text in Config.in option.
- rename BUSYBOX_CONFIGURE_INDIVIDUAL_BINARIES to
BUSYBOX_SET_INDIVIDUAL_BINARIES to be consistent with other
variables.
- call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in
BUSYBOX_INSTALL_TARGET_CMDS, not in BUSYBOX_INSTALL_INIT_SYSV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- revert to the "optional file" approach in makedevs;
- reword Config.in comment text to match our usual pattern;
- abbreviate comment about how suid applets are found a little;
- all applets are optional (each one may have been unselected from the
busybox config).]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: remove /usr/share/udhcpc/default.script from BUSYBOX_PERMISSIONS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The utils provided by this package were formerly packaged with libva.
Libva contained a patch not to compile mpeg2vldemo to reduce
dependencies by avoiding C++, this patch is not moved to this package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pngquant's homegrown configure script doesn't understand CC with a
space, so we can't use ccache with it. Only the host variant is
affected: for the target, we call ccache from the toolchain-wrapper so
it's transparent to the configure script.
This wasn't seen in the autobuilders since they never enable
BR2_CCACHE.
To test, use any configuration and do
make BR2_CCACHE=y host-pngquant
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: Mention that openssl is a runtime dependency,
Add license info as noted by Romain, add gpl-2.0.txt,
Add comment explaining the missing build step,
Use install -t for x509-types files]
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1c6/1c69c77d7b378f6f76790fb5ca0078d0db0c40f8
devmem2 is a single C file that is downloaded as-is, and we patch it.
We also use that file as the license file.
Thus, the file when it is downloaded has a specific hash, but when
saved by legal-info, it has a different hash.
However, we can't store two different hashes for the same _filename_
with different content.
So, we extract the license file as a pre-patch hook, and store it in a
separate file, for which we can now add a hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/e1b/e1b3dee917f5ab3961f3dea006720431444d0ef5/
cache-calibrator is a single C file that is downloaded as-is, and we
patch it. We also use that file as the license file.
Thus, the file when it is downloaded has a specific hash, but when
saved by legal-info, it has a different hash.
However, we can't store two different hashes for the same _filename_
with different content.
So, we extract the license file as a pre-patch hook, and store it in a
separate file, for which we can now add a hash.
[Peter: add autobuilder reference]
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
- Avoid memset(NULL, 0, 0) to calm down the paranoid.
- Fix bug 252, invalid read of size 1 in ID3v2 parser due to forgotten
offset from the frame flag bytes (unnoticed in practice for a long time).
Fuzzers are in the house again. This one got CVE-2017-10683.
https://sourceforge.net/p/mpg123/bugs/252/
- Avoid a mostly harmless conditional jump depending on uninitialised
fr->lay in compute_bpf() (mpg123_position()) when track is not ready yet.
- Fix undefined shifts on signed long mask in layer3.c (worked in practice,
never right in theory). Code might be a bit faster now, even. Thanks to
Agostino Sarubbo for reporting.
dlopen() is now directly used to load output modules (and the
--with-modules-suffix option has been removed), so adjust the modules logic
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
avcodec 2.2.x, as used in VideoLAN VLC media player 2.2.7-x before
2017-06-29, allows out-of-bounds heap memory write due to calling memcpy()
with a wrong size, leading to a denial of service (application crash) or
possibly code execution.
https://trac.videolan.org/vlc/ticket/18467
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpwquality adds cracklib to its _DEPENDENCIES, but forgot to select it in
Config.in, leading to build failures if cracklib isn't explicitly enabled:
Makefile:536: *** cracklib is in the dependency chain of libpwquality that
has added it to its _DEPENDENCIES variable without selecting it or depending
on it from Config.in. Stop.
No autobuilder references as this error happens before build-time.log is
written, causing the autobuilder to ignore the build result.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will help catch a change of license even if the filename does
not change.
For now, a missing hash for the license files is not a fatal error, to
let people catch up and add them. When we switch to make it mandatory,
we can simplify the code by just removing the case statement.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the per-package legal-info is mostly silent, but we're soon
to add a check for the hashes of the license files.
In that case, and when there is a hash mis-match, we want a user to know
what package had a changed license file.
So, we add a call to MESSAGE to display the package we're currently
saving the legal-info of, like so:
>>> busybox 1.26.2 Collecting legal info
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we check that the filenames in hash lists do not contain
a slash '/' character, because all we are checking so far are the
downloaded archives, and we explicitly need the filename to not contain
a directory component at all.
However, we're soon to also check the hashes of the license files in
packages sources, and those license files may be at any arbitrary
directory-depth in the packages source tree.
[Peter: Remove reference to files with same basename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using -ef to check for the same file is nicer than relying on a magic
symlink-to-fakedate.
Notice that -ef isn't stricly posix (but supported by bash/dash/zsh), so
I've changed the shebang to /bin/bash.
While we are at it, restructure the logic to do a single exec at the end
instead of handling the epoch/!epoch cases differently for simplicity.
With that out of the way we can directly install it as $HOST/usr/bin/date
instead of the fakedate / date symlink.
[Peter: drop IFS=: change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to error out instead of running menuconfig when no .config
is available broke an existing use case:
make O=output-foo; cd output-foo; br-init-conf (or similar to get a sensible .config); make
As there is no wrapper makefile in output-foo.
Fix it by ensuring the wrapper gets created if needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, cut prints the entire line if the specified delimiter is not
present at all:
$ printf "foo bar" | cut -d' ' -f2
bar
$ printf "foobar" | cut -d' ' -f2
foobar
In setlocalversion, cut is presented with the output of 'hg id' which has
the format:
"<revision> <tags-if-any>"
If the current revision is not tagged, the output of 'hg id' does not
contain the delimiter (space), cut prints the entire string, and
setlocalversion thinks the version is the tag.
As setlocalversion does not print anything for tagged versions, there is no
output overall, and no correct indication of the mercurial revision.
Fix by passing the extra cut option '--only-delimited', which suppresses
output if no delimiter is found.
This problem likely went unnoticed for so long, because the tag 'tip' (i.e.
most recent revision of the branch) is treated specially: in this case the
mercurial revision _is_ printed, i.e. the situation is treated as
'untagged'.
The problem is only seen when you are _not_ at the most recent revision in
your branch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the Qt virtualkeyboard package.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Thomas:
- use SDPX license codes
- add entry to DEVELOPERS file
- drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED logic, since we removed this option
- select BR2_PACKAGE_QT5DECLARATIVE and
BR2_PACKAGE_QT5DECLARATIVE_QUICK instead of using a "depends on"
and propagate the appropriate dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0001-tools-make_rel_symlink.py-can-also-use-python2.patch. Build requires
host-python3 since the previous version bump.
Drop upstream 0002-lircd-Remove-use-of-functions-killed-in-kernel-4.8.0.patch.
Add a patch fixing header guard macro collision with musl libc.
Set HAVE_WORKING_POLL to skip poll(2) run test that is not compatible with
cross compilation.
Add optional dependency on libftdi1.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches downloaded from Github are not stable, so bring them in the
tree.
For this package, the patch is not replaced 1:1 with what Github was
providing. Indeed, the URL
4740f3341a.patch
no longer exists. This pull request has been merged, so we instead use
the real upstream commits. However, the upstream developer apparently
messed up, and applied the change in two separate commits, which is
why one patch fetched from Github is replaced by this commit by two
patches in package/sngrep/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the manual about hashes, fixing a number of
issues:
- Adding the .hash file should no longer be optional: it *must* be
added. Therefore the wording "You can add ..." is changed to "When
possible, you must add ...".
- We are now checking hashes for Git downloaded packages, so fix this
as well, and indicate more clearly which download methods have hash
checking.
- We no longer want to have auto-generated patches be downloaded
through <pkg>_PATCH because such patches are not stable over time,
and their hash can change. For example, downloading patches from
github.com should no longer be done.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the JSON1 SQLite extensions. This extension allows SQLite to
store and query JSON objects in a database.
Signed-off-by: Bradford Barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3142: An error in TSIG authentication can permit unauthorized zone
transfers
An attacker who is able to send and receive messages to an authoritative DNS
server and who has knowledge of a valid TSIG key name may be able to
circumvent TSIG authentication of AXFR requests via a carefully constructed
request packet. A server that relies solely on TSIG keys for protection with
no other ACL protection could be manipulated into:
* providing an AXFR of a zone to an unauthorized recipient
* accepting bogus NOTIFY packets
https://kb.isc.org/article/AA-01504/74/CVE-2017-3142
CVE-2017-3041: An error in TSIG authentication can permit unauthorized dynamic
updates
An attacker who is able to send and receive messages to an authoritative DNS
server and who has knowledge of a valid TSIG key name for the zone and service
being targeted may be able to manipulate BIND into accepting an unauthorized
dynamic update.
https://kb.isc.org/article/AA-01503/74/CVE-2017-3143
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For Gitlab-CI, we want to avoid re-generating the minimal install to
be able to run tests all the time. So let's create a docker image that
we can post on Docker Hub and then pull.
For the time being, this is just what we need for running our CI. Later
we can produce something that is also useful for users.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves our .gitlab-ci.yml logic to execute our runtime
tests located in support/testing/. To do so, this commit:
- Adds more Debian packages to be installed, namely the nose2 and
pexpect packages needed by the runtime testing infrastructure, as
well as the necessary Qemu emulators
- The description of how to run the runtime tests. Each test is
executed as a separate Gitlab CI job, so that the status of each
test is easily visible in the Gitlab CI web interface.
- The Makefile is improved to auto-generate .gitlab-ci.yml from
.gitlab-ci.yml.in, like we're doing for defconfigs. Since the
dependencies of .gitlab-ci.yml are no longer correct, we abandon
them and instead make it a PHONY target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: simplify .gitlab-ci.in a little, removing redundant stuff;
make .gitlab-ci.yml a PHONY target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If $(BR2_PACKAGE_HAS_HOST_FOO) is defined, then the pkg-virtual
infrastructure will check if $(BR2_PACKAGE_PROVIDES_HOST_FOO) is not
empty.
But later, $(BR2_PACKAGE_HOST_FOO_DEPENDENCIES) will be set from
$(BR2_PACKAGE_PROVIDES_FOO), ignoring $(BR2_PACKAGE_PROVIDES_HOST_FOO).
So fix this discrepancy by setting $(BR2_PACKAGE_HOST_FOO_DEPENDENCIES)
from $(BR2_PACKAGE_PROVIDES_FOO) only if $(BR2_PACKAGE_PROVIDES_HOST_FOO)
is empty.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add comments suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Despite newer versions being available, this patch creates a package
for version 2017-05-05, because newer version have issues that need to
be addressed.
Still, the projects install target installs the wrong files, so custom
commands are needed for staging_install and target_install.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"$ORIGIN/../../usr/lib" is also a valid RPATH for binaries in
"$hostdir/usr/bin". After RPATH sanitation, all RPATH
directories start with "$ORIGIN".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of the Atmel defconfigs to linux4sam_5.6 in commit
0f7b5d4a9f, the new U-Boot version uses
the Device Tree compiler, so we need to add BR2_TARGET_UBOOT_NEEDS_DTC
in order to build dtc before u-boot and avoid build failures.
Fixes:
>>> uboot linux4sam_5.6 Configuring
>>> uboot linux4sam_5.6 Building
[...]
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit e51d69a3b (mosquitto: specify that hash is taken from upstream)
changed the .hash description header, but the upstream hash only applies
to the tarball, not the patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a major release, but the API seems to be mostly
backwards-compatible. The only package depending on this library in
buildroot is libsigrok and it builds fine.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patches are now upstream and can be removed. Remove the comment
about Qt4 - it's no longer valid. Add boost-serialization to
dependencies.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems the ! is removed by the yaml parser, so it needs to be quoted.
While we're at it, add some explanatory comment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest release fixed dlmopen detection, so that
musl/uClibc-ng toolchains can be used.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When getdeveloperlib.parse_developers doesn't find anything, the script
tries sys.exit(1) but sys is not imported.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-DEVELOPERS test would always fail, because && will return
the exit code of the left-hand side if not 0, so it *always* returns
1.
But in fact, the test can be simplified quite a lot: we can run
getdeveloper directly, without arguments. That should just print
'No action specified', but it will also print any syntax errors it
encountered. So we can just 'grep -v' the expected output away; if
there is anything more, grep will return 0, but if there is nothing
more, it will return 1. So we just need to invert the result.
Incidentally, this also fixes the incorrect remaining reference to
support/scripts.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were still some references to the old location of the scripts in
the manual. Replace them by utils/.
While we're at it, remove the redundant ./ at the beginning of some of
the example commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were still references to support/scripts/ for scripts that have
moved to the utils directory. There were also references that were
updated, but not re-updated when the tools moves to utils.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5Multimedia builds the alsa plugin if it detects libasound in the
system. Add alsa-lib to dependencies if BR2_PACKAGE_ALSA_LIB is
selected.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5Multimedia includes support for pulseaudio if it detects libpulse
and libpulse-mainloop-glib in the system at build-time. We need to
depend on pulseaudio and libglib2 if it is selected.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 67117adc89 backed out the
deployment of libmtd headers (libmtd.h, libubi.h, ubi-media.h) to
staging and these may be needed by packages that work directly with MTD,
for example swupdate. mtd also produces libmtd.a and libubi.a which are
needed by those packages.
Tested by configuring swupdate to use MTD and verifying that swupdate
now compiles and links.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas: change to a post-install staging hook, and add comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add brmake, a small script that redirects the build output log to a
file, keeping just Buildroot's own messages, with the date+time added
at the start of the line.
We need to unbuffer the output of make so that, when the script is
interrupted (SIGINT, ^C), there is no lingering output not yet digested
by the logger loop.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running multiple instances of emulator in parallel, the login
prompt can take some time to appear.
Use a large timeout when waiting for the prompt to avoid random
failures.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to pass -t to set the number of testcases to run
simultaneously.
When -j is not specified, calculate it to split the available cores
between the simultaneous testcases.
Example of auto calculated -j for cpu_count 8:
-t -j total
1 9 9
2 4 8
3 3 9
4 2 8
>=5 1 t
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the parameter logfile is passed to spawn(), pexpect sends both
stdin and stdout to the logfile and it creates a double echo effect.
One way to avoid the double echo in the logfile would be to disable the
echo on the terminal just after login ("stty -echo"), but double echo of
user and password would remain.
Instead of that, send only the stdout to the logfile using the
logfile_read property.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of redirecting qemu serial to telnet, redirect it to stdio.
It allows to run testcases in parallel without random failing caused by
two emulators trying to use the same telnet port (1234).
'qemu -serial stdio' returns some extra <CR> characters, so remove them
from the log.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace subprocess + telnetlib with pexpect.
Use the telnet installed on the host machine instead of telnetlib, while
the serial from qemu is not yet redirected to stdio.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This verifies that the DEVELOPERS file doesn't contain errors. It
just runs parse_developers from getdeveloperlib and errors out if
that produces any output.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, we have a choice to select between stripping and not
stripping. This is legacy code from back when we had a third option,
sstrip (super-strip).
Since we removed sstrip, stripping or not stripping is now just a
boolean rather than a choice.
Make it so.
We make BR2_STRIP_strip default to 'y' to keep the current behaviour of
defaulting to stripping.
Move BR2_STIP_none to legacy, and instruct the user to review the new
setting.
Drop any reference to BR2_STRIP_none in comments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, passing STRIP=true is not sufficient to disable striping
altogether, as some (incorrectly generated?) configure scripts will
ignore a ${STRIP} that is not a full path.
This is the case, for example, for nmap, which ends up using the host
strip command when we pass STRIP=true:
checking for arm-buildroot-linux-gnueabihf-strip... no
checking for strip... /usr/bin/strip
configure: WARNING: using cross tools not prefixed with host triplet
[--SNIP--]
/usr/bin/install -c -c -m 755 nping /home/ymorin/dev/buildroot/O/target/usr/bin/nping
/usr/bin/strip -x /home/ymorin/dev/buildroot/O/target/usr/bin/nping
/usr/bin/strip: Unable to recognise the format of the input file `/home/ymorin/dev/buildroot/O/target/usr/bin/nping'
We fix that by forcing a full path to the strip sommand when it is
disabled: STRIP=/bin/true
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RAUC is the Robust Auto-Update Controller developed by the folks at
Pengutronix. It supports updating embedded systems from the network
(ex: HawkBit) or from a disk and provides a d-bus interface.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade the Xen package to Xen 4.9.0. This also means we can remove
almost all of the patches we were previously carrying.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
_mmc on defconfig files in engicam need to drop and same follow on
other engicam defconfig files.
So, this patch rename engicam_imx6ul_isiot_mmc_defconfig to
engicam_imx6ul_isiot_defconfig which is missing in commit "board: Add
support for Engicam Is.IoT MX6UL SOM" (sha1:
0235bc6176)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since forever, we run 'menuconfig' automatically on an unconfigured
tree. However, this does not help users that much:
- If they read the documentation, they should already know to run
make menuconfig first.
- If they haven't read the documentation, dropping them in menuconfig
isn't very helpful.
- It's a likely that the user didn't intend to be in an unconfigured
tree (e.g. wrong O= specified), so starting menuconfig (and polluting
this wrong O= directory) is not very helpful.
- It's possible that the user really doesn't want menuconfig, but
instead needs xconfig, or some defconfig, or ...
So, instead of trying to guess what the user needs, print an error and
let the user decide what to do next.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Alessandro Power on StackOverflow [1], the behaviour
of "make toolchain" in an unconfigured tree is misleading.
When .config doesn't exist, we don't read in the package .mk files, so
"make <package>" doesn't work:
$ make busybox
make: *** No rule to make target 'busybox'. Stop.
However, for "linux" and "toolchain", the corresponding file (or
actually directory) already exists. So instead, we get:
$ make linux
make: Nothing to be done for 'linux'.
This is confusing, because it looks as if the build succeeded.
The obvious solution is to make linux and toolchain PHONY targets when
.config doesn't exist. However, that actually does the reverse, because
then a rule _does_ exist for them and since they don't have
dependencies, make will consider them to be ready.
Therefore, we also have to provide an explicit rule for them, and
explicitly error out. Thise behaviour is still different from other
packages, but at least it is much less confusing.
[1] https://stackoverflow.com/questions/44521150
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As all librt and libpthread functions are integrated into
libc for a while, workaround no longer required.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the bump of gnu-efi from 3.0.5 to 3.0.6, patch 0008 in the
syslinux package is no longer needed. More specifically, it's commit
bf07e8141777e5a2d67ec8447084215224bdad4b in upstream gnu-efi that
fixed the underlying issue.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
[Thomas: add better commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc contains a vulnerability that allows specially crafted LD_LIBRARY_PATH
values to manipulate the heap/stack, causing them to alias, potentially
resulting in arbitrary code execution. Please note that additional
hardening changes have been made to glibc to prevent manipulation of stack
and heap memory but these issues are not directly exploitable, as such they
have not been given a CVE.
https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
Patches are identical to upstream, except that the ChangeLog modifications
have been stripped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-9868: In Mosquitto through 1.4.12, mosquitto.db (aka the
persistence file) is world readable, which allows local users to obtain
sensitive MQTT topic information.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a fix for CVE-2017-9445: In systemd through 233, certain sizes passed to
dns_packet_new in systemd-resolved can cause it to allocate a buffer that's
too small. A malicious DNS server can exploit this via a response with a
specially crafted TCP payload to trick systemd-resolved into allocating a
buffer that's too small, and subsequently write arbitrary data beyond the
end of it.
The other patch fixes an issue with the security fix.
[Peter: use CVE description from MITRE]
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tmpfile support is optional in systemd but the dhcp server install it's
config file in $(TARGET_DIR)/usr/lib/tmpfiles.d directory when systemd
is used as init system.
So it seems that dhcp server require tmpfile support for systemd based
system.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the BR2_CMAKE_CANDIDATES variable, containing a list of candidates
to check and use as BR2_CMAKE, if possible.
This allows using "cmake3" on CentOS 7, whose default cmake corresponds
to version 2.8.12. Example:
$ make BR2_CMAKE_CANDIDATES="cmake cmake3"
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is useful on CentOS 7 whose "cmake" package provides cmake 2.8.12,
which is too old, but the "cmake3" package (from EPEL) provides version
3.6.3, which is satisfactory. Examples:
$ sh support/dependencies/check-host-cmake.sh 2.8 cmake cmake3
/usr/bin/cmake
$ sh support/dependencies/check-host-cmake.sh 3.1 cmake cmake3
/usr/bin/cmake3
$ sh support/dependencies/check-host-cmake.sh 3.8 cmake cmake3
(nothing)
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes a problem where it was not possible to replace
/etc/shadow with a symlink to a e.g. a user partition where the
shadow file is placed. This is required, e.g. for systems where the
rootfs is mounted read-only but users should still be able to be
added. Thus, if within an filesystem overlay setup a user tries
to replace /etc/shadow with a symlink to the real file on a user
partition a buildroot build stops with an error message because
sed is called on the symlink instead of following the symlink.
This commit fixes this shortcoming.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not support uClibc-ng/musl C library version choice support,
do the same for GNU C Library.
No legacy handling required as only version choice is removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: move 3.2 kernel headers dependency to the libc choice in
toolchain/toolchain-buildroot/Config.in file, and added a Config.in
comment about it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam Is.IoT MX6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools/host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create board/engicam/icorem6 for i.CoreM6 supported files.
and update the readme.txt so-that it can list i.CoreM6 board
details.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS
board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A VFAT filesystem is described in the genimage configuration file, so
we need host-dosfstools and host-mtools enabled in the defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forward port 0001-link-against-libintl.patch. Since now autoreconf works, move
the patch from Makefile.in to Makefile.am. Also, convert to git format.
Remove 0002-no-__progname.patch. Buildroot default uClibc and musl now provide
__progname.
Add a patch that adds the git-version-gen script to fix autoreconf.
Remove upstream patch.
Upstream switched to .xz tarballs.
Add upstream provided hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add host-pkgconf to dependencies as we now use PKG_CHECK_MODULES in
configure.ac.
Changelog for v0.3:
New features:
- gpiomon can now watch multiple lines at the same time and supports custom
output formats which can be specified using the --format argument
- testing framework can now test external programs: test cases for gpio-tools
have been added
Improvements:
- improve error messages
- improve README examples
- configure script improvements
Bug fixes:
- use correct UAPI flags when requesting line events
Also includes bug fixes from v0.2.1:
Bug fixes:
- capitalize 'GPIO' in error messages in gpioset, gpioget & gpiomon
- tweak the error message on invalid arguments in gpiofind
- don't ignore superfluous arguments and fix the displayed name for falling
edge events in gpiomon
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two patches are no longer needed with the latest upstream version,
so bump to the latest one.
Tested on imx6.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Add a patch to revert the assumption that ncursesw headers are under
/usr/include/ncursesw/ only. That's necessary to have both versions
for ABI/API compatibility but does not make sense on embedded systems.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
The patch is a bit drastic but it solves the problem of using ncursews
while we discuss a better solution in the util-linux mailing list.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2016-9577
Frediano Ziglio of Red Hat discovered a buffer overflow
vulnerability in the main_channel_alloc_msg_rcv_buf function. An
authenticated attacker can take advantage of this flaw to cause a
denial of service (spice server crash), or possibly, execute
arbitrary code.
CVE-2016-9578
Frediano Ziglio of Red Hat discovered that spice does not properly
validate incoming messages. An attacker able to connect to the
spice server could send crafted messages which would cause the
process to crash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2016-0749: The smartcard interaction in SPICE allows remote attackers to
cause a denial of service (QEMU-KVM process crash) or possibly execute
arbitrary code via vectors related to connecting to a guest VM, which
triggers a heap-based buffer overflow.
CVE-2016-2150: SPICE allows local guest OS users to read from or write to
arbitrary host memory locations via crafted primary surface parameters, a
similar issue to CVE-2015-5261.
The pyparsing check has been dropped from configure, and the spice protocol
definition is again included, so the workarounds can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2015-3247: Race condition in the worker_update_monitors_config function
in SPICE 0.12.4 allows a remote authenticated guest user to cause a denial
of service (heap-based memory corruption and QEMU-KVM crash) or possibly
execute arbitrary code on the host via unspecified vectors.
CVE-2015-5260: Heap-based buffer overflow in SPICE before 0.12.6 allows
guest OS users to cause a denial of service (heap-based memory corruption
and QEMU-KVM crash) or possibly execute arbitrary code on the host via QXL
commands related to the surface_id parameter.
CVE-2015-5261: Heap-based buffer overflow in SPICE before 0.12.6 allows
guest OS users to read and write to arbitrary memory locations on the host
via guest QXL commands related to surface creation.
Client/gui support is gone upstream (moved to spice-gtk / virt-viewer), so
add Config.in.legacy handling for them.
Lz4 is a new optional dependency, so handle it.
The spice protocol definition is no longer included and instead used from
spice-protocol. The build system uses pkg-config --variable=codegendir to
find the build time path of this, which doesn't take our STAGING_DIR prefix
into consideration, so it needs some help. The installed protocol
definition will likewise be newer than the generated files, so we need to
workaround that to ensure they are not regenerated (which needs host python
/ pyparsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tunneling support is gone upstream, so drop the patch and add
Config.in.legacy handling for the option.
Celt051 is no longer a hard dependency, and opus is a new optional
dependency, so adjust the dependencies to match.
Python / pyparsing are not needed as the tarball contains the generated
files (this should presumably have been host-python in the first place as
these are used at build time), but we need a small workaround to convince
configure that they really aren't needed.
Alsa-lib is only needed for client support, and the configure script checks
for X11/Xext/Xrender, so adjust the dependencies to match.
A user manual is now generated by default if asciidoc is available, so
explicitly disable that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of a custom post-build script, use the boot script generation
logic of the U-Boot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
More and more of our defconfigs need to generate a U-Boot boot
script. It's a simple call to mkimage, but we already have 12
instances of this logic in board/, and there are patch series waiting
in patchwork adding 3 more boards that need this.
So let's add an option in the U-Boot package to generate such a boot
script image easily.
Note that we assume a single script needs to be generated, and the
output file name is boot.scr. The only platform for which it seems to
not be the case are the Boundary Devices platforms: they generate two
boot scripts, 6x_bootscript and 6x_upgrade, but they are anyway
installed inside TARGET_DIR, not BINARIES_DIR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0006 is no longer needed as the fix is already upstream.
Confirmed that the colors are displayed correctly when running the
Qt5CinematicDemo application on i.mx6.
Patch 0007 is already applied upstream.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch backports two patches that have been sent upstream as a pull
request in order to fix sshd for MIPS64 n32.
The first patch adds support for detecting the MIPS ABI during the
configure phase.
The second patch sets the right value to seccomp_audit_arch taking into
account the MIPS64 ABI.
Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or
AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built
for MIPS64. However, that's only valid for n64 ABI. The right macros for
n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and
AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.
Because of that an sshd built for MIPS64 n32 rejects connection attempts
and the output of strace reveals that the problem is related to seccomp
audit:
[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++
Pull request: https://github.com/openssh/openssh-portable/pull/71
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for specifying multiple image files in
BR2_TARGET_BAREBOX_IMAGE_FILE config option.
This is useful for boards with several RAM size variants.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: rename internal variable from $(1)_IMAGE_FILE to
$(1)_IMAGE_FILES.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default bootargs have changed in U-Boot for this board. Build U-Boot
environment and add it to the SD card image to update bootargs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
at91sam9x5ek_mmc board was missing in the previous patch adding 1M
offset for FAT partition to solve some boot issues with the ROM code.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream uploaded a new tarball with the same version number 2016-09-08,
some time after the update to v2.0.9 in buildroot. Someone noticed, but
upstream set the ticket to wontfix, and promised to do better in the
future: https://sourceforge.net/p/iperf2/tickets/20/
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-1000381: The c-ares function `ares_parse_naptr_reply()`, which is
used for parsing NAPTR responses, could be triggered to read memory outside
of the given input buffer if the passed in DNS response packet was crafted
in a particular way.
https://c-ares.haxx.se/adv_20170620.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
remove input-tools, it has been obsoleted by linuxconsoletools
linuxconsoletools uses the same name as upstream and carries
the latest version of the tools installed by input-tools.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-3167: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
use of the ap_get_basic_auth_pw() by third-party modules outside of the
authentication phase may lead to authentication requirements being bypassed.
CVE-2017-3169: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_ssl may dereference a NULL pointer when third-party modules call
ap_hook_process_connection() during an HTTP request to an HTTPS port.
CVE-2017-7659: A maliciously constructed HTTP/2 request could cause
mod_http2 to dereference a NULL pointer and crash the server process.
CVE-2017-7668: The HTTP strict parsing changes added in Apache httpd 2.2.32
and 2.4.24 introduced a bug in token list parsing, which allows
ap_find_token() to search past the end of its input string. By maliciously
crafting a sequence of request headers, an attacker may be able to cause a
segmentation fault, or to force ap_find_token() to return an incorrect
value.
CVE-2017-7679: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_mime can read one byte past the end of a buffer when sending a malicious
Content-Type response header.
While we're at it, use the upstream sha256 checksum instead of sha1.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3140 is a denial-of-service vulnerability affecting 9.9.10,
9.10.5, 9.11.0->9.11.1, 9.9.10-S1, and 9.10.5-S1 when configured with
Response Policy Zones (RPZ) utilizing NSIP or NSDNAME rules.
https://kb.isc.org/article/AA-01495/74/CVE-2017-3140
CVE-2017-3141 is a Windows privilege escalation vector affecting
9.2.6-P2+, 9.3.2-P1+, 9.4.x, 9.5.x, 9.6.x, 9.7.x, 9.8.x, 9.9.0->9.9.10,
9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, and 9.10.5-S1. The
BIND Windows installer failed to properly quote the service paths,
possibly allowing a local user to achieve privilege escalation, if
allowed by file system permissions.
https://kb.isc.org/article/AA-01496/74/CVE-2017-3141
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway supports many different transports, and currently there
is no implicit way to turn them off or on. Instead, if the dependency
happens to be built, then the transport is enabled.
Create a transports section in the config file and add
BR2_PACKAGE_JANUS_REST as the first transport.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: propagate thread dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Such a construct allows to bail out if the installation of one of the
program fails, which the current shell-based for loop doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This revision includes:
- Moving from a handwritten makefile to autotools.
- Restructuring and cleaning up the source tree.
- Fixing the problems that the patches in the package/mtd directory fixed.
Changes:
- Move from generic-package to autotools-package in mtd.mk.
- Remove no longer necessary patches.
- Update binary locations in mtd.mk
- Update library/header locations in mtd.mk
- Remove MTD_ADD_MISSING_LINTL definition from mtd.mk, as it's no longer
needed.
Tested with toolchains compiled with musl, uclibc, and glibc.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: additional improvements
- introduce hidden options BR2_PACKAGE_MTD_JFFS_UTILS,
BR2_PACKAGE_MTD_UBIFS_UTILS and BR2_PACKAGE_MTD_TESTS that match the
./configure options of mtd. Those hidden options select the
appropriate dependencies checked by the configure script, and are
selected by the existing per-tool Config.in options.
- .mk file is changed to handle properly the new hidden options
BR2_PACKAGE_MTD_JFFS_UTILS, BR2_PACKAGE_MTD_UBIFS_UTILS and
BR2_PACKAGE_MTD_TESTS.
- .mk file is changed to properly handle BR2_PACKAGE_ACL, by passing
--with-xattr/--without-xattr.
- remove HOST_MTD_BUILD_CMDS and HOST_MTD_INSTALL_CMDS, those are no
longer needed since we have an autotools-package now.
- MTD_STAGING_y and MTD_INSTALL_STAGING_CMDS are removed, we use the
default staging installation commands, that install everything that
is needed.
- the MTD_TARGETS_UBI_y variable is merged into MTD_TARGETS_y, as we no
longer need to distinguish both.
- integck installation logic is moved into MTD_TARGETS_y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In buildroot ffmpeg uses x264 as optional dependency if
BR2_PACKAGE_FFMPEG_GPL is enabled at the same time.
If BR2_PACKAGE_FFMPEG_GPL is disabled and ffmpeg is built without x264
support before x264 itself is build, x264 picks up certain ffmpeg libs
as optional dependency leading to build errors because x264 does not
correctly link statically against ffmpeg.
To avoid a circular dependency and to avoid teaching x264 how to
correctly link statically with ffmpeg we just disable all ffmpeg-
related options.
Fixes
http://autobuild.buildroot.net/results/36a/36abb5b8f3aab57fb7b63056b216b4a58143ee3e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to check whether librt is required for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
The following patches are not renumbered. The noise is too high.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CodeSourcery x86 and sh, the ADI Blackfin, and the Xilinx Mircoblaze
external toolchain profiles have all been removed. Update the manual.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery sh toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery x86 toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix following error:
| ../../libtirpc-1.0.1/src/xdr_sizeof.c:93:13: error: 'uintptr_t' undeclared (first use in this function); did you mean '__intptr_t'?
| if (len < (uintptr_t)xdrs->x_base) {
| ^~~~~~~~~
This error occurs with the latest glibc master version (during the testing I had
glibc commit 92bd70fb85bce57ac47ba5d8af008736832c955a), but doesn't occur with
version 2.25.
Patch includes stdint.h to provide uintptr_t.
It has been submitted upstream:
https://sourceforge.net/p/libtirpc/mailman/message/35850276/
Signed-off-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com>
[Thomas: reformat as Git formatted patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot and linux kernel are too old to build with gcc 6.
Fit it by backporting the following commits:
- u-boot: 9b2c282b34 (compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6)
- linux: cb984d101b (compiler-gcc: integrate the various compiler-gcc[345].h files)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a kernel module and utilities in order to use
v4l2loopback virtual devices. This module allows you to create
"virtual video devices" normal (v4l2) applications will read these
devices as if they were ordinary video devices, but the video will not
be read from e.g. a capture card but instead it is generated by
another application.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We already have an option for selecting sntp support in ntp that can be
chosen from the menuconfig, and ntp's configure script has a --with-sntp
option (with its --without counterpart) which can be used for disabling
sntp support in ntp. However, we are not using it. This patch will make
use of it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure option --with-ncurses has been removed in version 1.0.0
and thus is no longer needed.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-9468 - Joseph Bisch discovered that Irssi does not properly handle
DCC messages without source nick/host. A malicious IRC server can take
advantage of this flaw to cause Irssi to crash, resulting in a denial of
service.
CVE-2017-9469 - Joseph Bisch discovered that Irssi does not properly handle
receiving incorrectly quoted DCC files. A remote attacker can take
advantage of this flaw to cause Irssi to crash, resulting in a denial of
service.
See https://irssi.org/security/irssi_sa_2017_06.txt for more details.
Remove 0001-Get-back-to-using-pkg-config-to-check-for-OpenSSL.patch as it
applied upstream and drop autoreconf as configure.ac is no longer patched.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
- CVE-2017-9233 - External entity infinite loop DoS. See:
https://libexpat.github.io/doc/cve-2017-9233/
- CVE-2016-9063 -- Detect integer overflow
And further more:
- Fix regression from fix to CVE-2016-0718 cutting off longer tag names.
- Extend fix for CVE-2016-5300 (use getrandom() if available).
- Extend fix for CVE-2012-0876 (Change hash algorithm to William Ahern's
version of SipHash).
Also add an upstream patch to fix detection of getrandom().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently building full gdb for MIPS musl fails because it's trying to
include <sgidefs.h> which is provided by glibc and uClibc, but not by
musl.
However, the kernel headers provide <asm/sgidefs.h> which has the same
definitions, so we can use that one instead.
Backporting a patch that has been sent upstream. Taken from here:
https://sourceware.org/bugzilla/show_bug.cgi?id=21070
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linuxconsoletools contains the inputattach utility
to attach legacy serial devices to the Linux kernel
input layer and joystick utilities to calibrate and
test joysticks and joypads.
The buildroot package adds options to build only certain
tools.
website: http://sf.net/projects/linuxconsole/
Signed-off-by: Koen Martens <gmc@sonologic.nl>
[Thomas: minor tweaks to Config.in and .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 28d97609b2 ("configs/qemu:
bump to the latest kernel version") updated most qemu defconfigs to
use Linux 4.11. However, for the SH4 configurations, Linux 4.9 was
kept, because 4.11 apparently has an issue.
Unfortunately, while the defconfigs for SH4 were unchanged, the Linux
kernel configuration file was renamed from linux-4.9.config to
linux-4.11.config.
This commit renames the Linux configuration files back to their
previous name, linux-4.9.config, matching what the Qemu SH4 defconfigs
specify.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kvazaar is an open-source HEVC encoder licensed under LGPLv2.1.
This provides tools to encode raw video into HEVC stream.
website: http://ultravideo.cs.tut.fi/
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
[Thomas: add --without-cryptopp to explicitly disable support for this
optional dependency, use SPDX license code, fix Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Remove patch already applied upstream.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tool was hosted at fedorahosted.org which was shut down in early
2017. According to a private conversation with the upstream maintainer,
the new home for this tool is on infradead.org so far. So the SITE was
adapted accordingly.
Additionally the version was bumped from 1.4 to current master. This
allows to drop one build patch. The other patches were recreated with
Git.
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.
Fix the build by bumping u-boot to 2017.05.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The board has an ethernet interface, so enable DHCP for it.
The used flash chip uses 16K erase blocks, so use that for JFFS2:
mtdinfo -a
..
mtd5
Name: user
Type: nand
Eraseblock size: 16384 bytes, 16.0 KiB
Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB)
Minimum input/output unit size: 512 bytes
Sub-page size: 256 bytes
OOB size: 16 bytes
Character device major/minor: 90:10
Bad blocks are allowed: true
Device is writable: true
While we're at it, add a readme explaining how to build and upload the build
to the board.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.
Fix the build by bumping the kernel to 4.11.5.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARM_TRUSTED_FIRMWARE_MAKE_TARGET is expanded, but it's never assigned
so it is always empty. On the other hand the make targets are defined
in ARM_TRUSTED_FIRMWARE_MAKE_OPTS, which should contain options, not
targets.
Clean it all up by moving the targets in the proper place, replacing
the useless $(ARM_TRUSTED_FIRMWARE_MAKE_TARGET).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Running glmark2 on imx6 with kernel 4.11.4 and Mesa 17.1.2 leads to
a segmentation fault.
Apply Lucas Stach's patch to fix the problem while upstream glmark2
doesn't get fixed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent setuptools versions require bootstrap.py to be invoked
before the standard setup process. So create such pre configure
hooks for both host and target versions.
Change download location to GitHub because setuptools doesn't
provide *.tar.gz any longer.
Fix legal info. setuptools is now licensed under MIT licence.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZC706 defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq MicroZed defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the variable a little
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.
Instead use a custom linux config for the pc defconfigs. With this, we also
can get rid of the fragment file containing the delta fra the qemu config.
Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b2
(configs/qemu: bump to the latest kernel version), breaking the build.
Fix it by also moving them to linux-4.11.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HTTPS works better behind certain corporate firewalls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a small patch to gdb that fixes the build of gdbserver
on m68k/coldfire:
../nat/linux-ptrace.c: In function 'linux_fork_to_function':
../nat/linux-ptrace.c:282:19: warning: implicit declaration of function 'clone' [-Wimplicit-function-declaration]
child_pid = clone (function, child_stack + STACK_SIZE,
^
../nat/linux-ptrace.c:283:5: error: 'CLONE_VM' undeclared (first use in this function)
CLONE_VM | SIGCHLD, child_stack + STACK_SIZE * 2);
^
../nat/linux-ptrace.c:283:5: note: each undeclared identifier is reported only once for each function it appears in
Thanks to Waldemar for pointing out the patch fixing this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gdbserver's code looks at both UCLIBC_USE_MMU *and* UCLIBC_HAS_MMU to
decide whether to enable the no-MMU code. So far, on noMMU platforms,
UCLIBC_HAS_MMU was still set to 'y'. This commit adjusts this, which is
a step forward in getting gdbserver to build on m68k/coldfire.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
Building a toolchain for SuperH/musl works, but the toolchain generate
bogus binaries, because the path to the program interpreter is not
known (and therefore is /dev/null).
This commit backports a patch from gcc 6.x to make SuperH support with
musl work properly.
The patch is not needed in gcc >= 6.x because the musl support is
upstream. The patch is not needed for gcc 4.9 because we had a
different musl support patch that had support for all architectures in
one patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
This commit small patches to gdb that fix redefined structures build
problems that occur when building on PowerPC, PowerPC64, PowerPC64le and
SuperH with the musl C library.
The PowerPC(64)(le) patch was taken from the Yocto Project, the SuperH
patch was inspired from the PowerPC patch. The issue has also been
reported upstream to the musl developers:
http://www.openwall.com/lists/musl/2017/06/03/1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Neither gdb nor gdbserver have support for ARM noMMU and OpenRISC, so
let's disable gdb on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- Fixed BR2_openrisc to BR2_or1k in Config.in.host
Changes since v1:
- Fixed BR2_openrisc to BR2_or1k
Before adding more architecture dependencies to gdb, let's introduce a
BR2_PACKAGE_GDB_ARCH_SUPPORTS, to avoid duplicating this list of
dependencies between the Config.in comment and the main Config.in
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Like for freetype-config, override libpng-config path otherwise
the one from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
configure:7480: checking for libpng-config
configure:7498: found /usr/bin/libpng-config
configure:7510: result: /usr/bin/libpng-config
configure:7529: checking whether libpng is present and sane
[...]
nios2-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/libpng12'
Fixes
http://autobuild.buildroot.net/results/b68/b68f54404a7d412d639ebb6d052412eea6ee3bf1/lcdproc-0.5.7/config.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If util-linux is not installed system-wide on the host, the build
fails with:
/usr/bin/gcc -Wp,-MT,isohybrid.o,-MMD,./.isohybrid.o.d -O2 -I/home/thomas/projets/buildroot/output/host/usr/include -W -Wall -Wstrict-prototypes -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64 -I/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils -c -o isohybrid.o /home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c
/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c:40:23: fatal error: uuid/uuid.h: No such file or directory
#include <uuid/uuid.h>
^
compilation terminated.
Therefore, this commit adds a dependency on host-util-linux, which
will ensure that libuuid is available. The resulting isohybrid tool is
really installed, and linked with libuuid:
$ readelf -d output/host/usr/bin/isohybrid
Dynamic section at offset 0x3e00 contains 26 entries:
Tag Type Name/Value
0x0000000000000001 (NEEDED) Shared library: [libuuid.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
0x000000000000000f (RPATH) Library rpath: [/home/thomas/projets/buildroot/output/host/usr/lib]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying setup type to be 'distutils' results in this package being
installed as .egg, a zipped file, which inadvertantly makes
'simplegeneric' to be dependent on BR2_PACKAGE_PYTHON*_ZLIB. In order
to avoid that specify setup type to be 'setuptools' which makes use of
--single-version-externally-managed and therefore installs the package
as .pyc and a .egg-info folder.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For a while already, our git downloaded tarballs are reproducible, so
we can actually check the hash for them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of excluding the hash specifically for the custom tarball and
custom version cases, exclude it always except in the one case where
we do have a hash: the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case.
It is not needed to exclude it twice for barebox and barebox-aux,
because they use the same source tarball and barebox-aux can only be
enabled if barebox is enabled. So simplify even further by pulling
the exclusion logic out of inner-barebox-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of excluding the hash specifically for the custom tarball and
custom version cases, exclude it always except in the one case where
we do have a hash: the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although we currently don't have a .hash file for linux-headers, there
already are exclusions for the BR2_KERNEL_HEADERS_AS_KERNEL case (copied
from linux.mk). However, there is no exclusion for the
BR2_KERNEL_HEADERS_VERSION case.
For the BR2_KERNEL_HEADERS_AS_KERNEL case, the exclusion is actually
not needed. Indeed, KERNEL_HEADERS_SOURCE is computed to be the same
value as LINUX_SOURCE, and linux.mk already adds LINUX_SOURCE to
BR_NO_CHECK_HASH_FOR.
For the other cases, we should exclude the BR2_KERNEL_HEADERS_VERSION
case because there the user supplies the version so it can't be
included in the .hash file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't have a hash for any linux version. We currently also don't
have a hash for the latest version, but if we ever add a hash, it
will only be for the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case. It's much
easier to always exclude except in the single case where we do have a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libv4l package builds fine even if locale is not enabled.
This have been tested with stm32f469_disco_defconfig
enabling build of libv4l package:
+#v4l utilities
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_PACKAGE_LIBV4L=y
+BR2_PACKAGE_LIBV4L_UTILS=y
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit removes the dependencies on MMU and dynamic libraries.
In order to build v4l2 utilities such as compliancy tools like
v4l2-compliance or cec-compliance, v4-utils can now be built without
dynamic libraries support.
In that case the v4l-utils parts which depends on dynamic library
support are not built:
- libv4l & libv4lconvert libraries
- libv4l plugins
- rds-ctl utility
- contrib test utilities
The rest of the utilities are built.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd's configure is looking in $PATH to find utilities that will be
needed at runtime.
Usually, those utilties, when installed on the host, will be found in
the same path they would be present on the target. For example,
/usr/bin/mount on the host would also be /usr/bin/mount on the target,
and all is find.
Except when we need to install a host variant of util-linux, which will
install mount in $(HOST_DIR), in which case systemd's configure would
find that one.
Of course, it is also very well possible that those utilities are not
installed on the host in the same location they would be on the target,
in case a user has manually installed some of those (e.g. in /usr/local/
or in /opt/)
Forcibly set the path to those utilities, as they are expected to be on
the target.
For kexec, we can set it even though we do not depend on it (yet).
systemd will appropriately test it at runtime.
For quota, we point to non-existing files, so as to catch errors at
runtime. It is to be noted that quotacheck is optional, while quotaon
does not seem to be (a service file is always installed, that uses it).
Note: utilties listed in the order they appear in configure.ac
Reported-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add setuptools runtime dependency, that is needed for
the chardetect script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As can be seen in linux/arch/powerpc/include/uapi/asm/termbits.h are
defined as (note that those are octal numbers):
\#define TABDLY 00006000
\#define CSIZE 00001400
\#define CRDLY 00030000
which gives shifts of 10, 8 and 12. Adjust socat.mk accordingly to
reflect that difference.
Signed-off-by: Mark Hinds <zoronic@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream rejected[1] the patch added in commit 6a1aa4e2da (swupdate: fix
build with older glibc). Instead of carrying this patch going forward, make
librt an extra library dependency in the Buildroot local swupdate .config.
This solution is somewhat less optimal than the patch, because it always adds
librt regardless of whether SURICATTA_HAWKBIT is enabled. In theory we could
add a test for (BR2_PACKAGE_JSON_C && BR2_PACKAGE_LIBCURL), which are the
SURICATTA_HAWKBIT dependencies, and edit .config at build time. But this adds
much complexity for little gain.
[1] https://groups.google.com/forum/?hl=en#!topic/swupdate/77QWIka27es
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... otherwise it fails spectacularly as soon as PATH is referenced in a
package rule (i.e. very soon, fortunately):
>>> host-lzip 1.18 Downloading
/bin/bash: -c: line 0: unexpected EOF while looking for matching `"'
/bin/bash: -c: line 1: syntax error: unexpected end of file
Fixes # 9886.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ciro Santilli <ciro.santilli@gmail.com>
[Thomas: fix typo in message, use tabs for indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an upstream patch to the sngrep package that fixes the
detection of wchar capable ncurses.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic support for orangepi-zero board.
Board support package includes the following components:
- mainline kernel v4.11
- mainline u-boot v2017.03
- extra kernel config options: spidev, spi nor flash, wifi
- dts patches to enable SPI NOR and spidev
More details about this board are available here:
- http://linux-sunxi.org/Orange_Pi_Zero
Note that at the moment networking is not supported right out of the box.
Ethernet submission to mainline kernel is a work in progress, see the
latest dwmac-sun8i branches at https://github.com/montjoie/linux
On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless
driver available at https://github.com/fifteenhex/xradio
Changes from v1:
* Send patch using proper subject
* Update xr819 kernel dts patch: add compatible property
[Peter: fix s/PC/Zero/ typo]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.
However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the update from 0.0.X to 1.0.0 suggests, this is a major update. The driver
uses X11's touch API now, instead of motion with button emulation. Furthermore
it supports multitouch when a recent version of tslib is installed.
It is not backwards compatible for very old versions of the X server. See
https://github.com/merge/xf86-input-tslib/releases for some details.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.11.3 2.9.0 YES OK
arm_versatile 4.11.3 2.9.0 YES OK
arm_versatile_nommu 4.4.70 2.9.0 YES OK
arm_vexpress 4.11.3 2.9.0 YES OK
m68k_mcf5208 4.11.3 2.9.0 YES OK
m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
microblazebe 4.11.3 2.9.0 YES OK
microblazeel 4.11.3 2.9.0 YES OK
mips32r2el_malta 4.11.3 2.9.0 YES OK
mips32r2_malta 4.11.3 2.9.0 YES OK
mips32r6el_malta 4.11.3 2.9.0 YES OK
mips32r6_malta 4.11.3 2.9.0 YES OK
mips64el_malta 4.11.3 2.9.0 YES OK
mips64_malta 4.11.3 2.9.0 YES OK
mips64r6el_malta 4.11.3 2.9.0 YES OK
mips64r6_malta 4.11.3 2.9.0 YES OK
nios2-10m50 4.11.3 2.9.0 NO OK
or1k 4.11.3 2.9.0 NO OK (5)
ppc_g3beige 4.11.3 2.9.0 YES OK
ppc_mpc8544ds 4.11.3 2.9.0 YES OK
ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
ppc64_pseries 4.11.3 2.9.0 YES OK
sh4 4.9.6 2.9.0 YES OK (4)
sh4eb 4.9.6 2.9.0 NO (1) OK (4)
sparc_ss10 4.11.3 2.9.0 YES OK
sparc64_sun4u 4.11.3 2.9.0 YES OK
sparc_sun4u 4.11.3 2.9.0 YES OK
x86 4.11.3 2.9.0 YES OK
x86_64 4.11.3 2.9.0 YES OK
xtensa_lx60 4.11.3 2.9.0 YES OK
xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since tslib now supports static builds the dependency on !BR2_STATIC_LIBS
can be removed from xf86-input-tslib too.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tslib can be configured to be built statically linked. So let's add this option.
tslib is quite configurable and each module can be selected to be built into
the static build. This configuration includes the hardware independent filter
modules (obviously), and the Linux evdev input module.
This results in a configuration that fully supports multitouch in any
combination.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building with old gcc versions (such as gcc 4.3), the current
version of kmod fails with:
shared/util.c:52: error: expected identifier or '(' before 'do'
shared/util.c:52: error: expected identifier or '(' before 'while'
This is due to a use of the internal assert_cc() macro outside of a
function, while this macro is defined for old gcc versions in a way that
cannot be used outside functions.
This wasn't noticed by the autobuilders because we don't have such old
target compilers. On the host side, we have some autobuilder instances
with such old gcc versions, but host-kmod is only used by the linux
package, which is never tested by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SELinux requires a config file in /etc/selinux which controls the state
of SELinux on the system.
This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the
default name is targeted.
This patch adds:
- A choice menu on Config.in that allows the user to select a default
SELinux state.
- A basic config file that will be installed to
target/etc/selinux and will set SELINUX= to the selected state.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_STATE
- qstrip the variable
- drop unused REFPOLICY_NAME variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refpolicy by default will build the highest version supported. This may
cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30,
which is the highest supported as of today.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_VERSION
- use qstrip to remove double quotes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add entry to DEVELOPERS file
- remove redundant dependencies
- drop unused REFPOLICY_PYINC option
- use SPDX tag for license
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The daemon service script associated with imx-uuc failed to stop the daemon
since the PID of the process wasn't stored at start time.
Adding -m option allowed to create the uuc.pid file as expected.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cmake depends on rhash, but host-cmake doesn't. This is because we use
the bundled dependencies for host-cmake but not for target.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are new dependencies: erlang-p1-jiffy, erlang-p1-oauth2,
erlang-p1-stun, erlang-p1-tls, erlang-p1-utils, erlang-p1-xmpp
as well as two host dependencies on erlang-p1-utils and
erlang-p1-xmpp. Otherwise the compilation via rebar fails.
4 patches have been refreshed and a new patch have been introduced to
tell rebar to use host dependencies instead of trying to download them.
Hopefully this patch could be drop in ejabberd 17.06. Missing SoB in
patches have been added as well.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
sdksyms.c:311:15: error: expected expression before »,« token
(void *) &, /* ../../include/os.h:96 */
by backporting an upstream patch, sdksyms.c is generated by
hw/xfree86/sdksyms.sh which is broken when used with gcc5+.
Problem was found while testing
http://patchwork.ozlabs.org/patch/762102/
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_TSLIB=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Botan compiles all PowerPC code with AltiVec support and only determines
at runtime whether the CPU even supports it. If the target CPU uses the
older SPE extensions, though, this is too late; since SPE and AltiVec
are incompatible, gcc aborts the compilation. This patch explicitly
disables AltiVec support unless BR2_POWERPC_CPU_HAS_ALTIVEC is defined
Signed-off-by: Tobias Blass <tobias.blass@rohde-schwarz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need BR2_ARM_CPU_HAS_ARM, otherwise build for cortex-m4 breaks with
"target CPU does not support ARM mode".
We only enable arm/aarch64 support for now, mips support is broken:
test-pkg/br-mips64-n64-full/build/gnu-efi-3.0.5/lib/mips64el/setjmp.S:40:
Error: opcode not supported on this processor: mips64 (mips64) `ext $v0,$v0,29,1'
Tested by test-pkg using this defconfig
BR2_PACKAGE_GNU_EFI=y
with the following results:
armv5-ctng-linux-gnueabi [ 1/49]: OK
armv7-ctng-linux-gnueabihf [ 2/49]: OK
br-aarch64-glibc [ 3/49]: OK
br-arcle-hs38 [ 4/49]: SKIPPED
br-arm-basic [ 5/49]: OK
br-arm-cortex-a9-glibc [ 6/49]: OK
br-arm-cortex-a9-musl [ 7/49]: OK
br-arm-cortex-m4-full [ 8/49]: SKIPPED
br-arm-full [ 9/49]: OK
br-arm-full-nothread [10/49]: OK
br-arm-full-static [11/49]: OK
br-bfin-full [12/49]: SKIPPED
br-i386-pentium4-full [13/49]: OK
br-i386-pentium-mmx-musl [14/49]: OK
br-m68k-5208-full [15/49]: SKIPPED
br-m68k-68040-full [16/49]: SKIPPED
br-microblazeel-full [17/49]: SKIPPED
br-mips32r6-el-hf-glibc [18/49]: SKIPPED
br-mips64-n64-full [19/49]: SKIPPED
br-mips64r6-el-hf-glibc [20/49]: SKIPPED
br-mipsel-o32-full [21/49]: SKIPPED
br-nios2-glibc [22/49]: SKIPPED
br-openrisc-uclibc [23/49]: SKIPPED
br-powerpc-603e-basic-cpp [24/49]: SKIPPED
br-powerpc64le-power8-glibc [25/49]: SKIPPED
br-powerpc64-power7-glibc [26/49]: SKIPPED
br-powerpc-e500mc-full [27/49]: SKIPPED
br-sh4-full [28/49]: SKIPPED
br-sparc64-glibc [29/49]: SKIPPED
br-sparc-uclibc [30/49]: SKIPPED
br-x86-64-core2-full [31/49]: OK
br-x86-64-musl [32/49]: OK
br-xtensa-full [33/49]: SKIPPED
i686-ctng-linux-gnu [34/49]: OK
linaro-aarch64 [35/49]: OK
linaro-arm [36/49]: OK
mips64el-ctng_n32-linux-gnu [37/49]: SKIPPED
mips64el-ctng_n64-linux-gnu [38/49]: SKIPPED
powerpc-ctng_e500v2-linux-gnuspe [39/49]: SKIPPED
sourcery-arm-armv4t [40/49]: OK
sourcery-arm [41/49]: OK
sourcery-arm-thumb2 [42/49]: OK
sourcery-mips64 [43/49]: SKIPPED
sourcery-mips [44/49]: SKIPPED
sourcery-nios2 [45/49]: SKIPPED
sourcery-sh [46/49]: SKIPPED
sourcery-x86-64 [47/49]: OK
sourcery-x86 [48/49]: OK
x86_64-ctng_locales-linux-gnu [49/49]: OK
49 builds, 27 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to the release notes "Compiler support for C++11 is now
required for building the ICU libraries.
GCC: version 4.8 and later has been tested."
Added corresponding dependencies and reverse dependencies.
Removed patch 0006 applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-gcc-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backported from:
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=239971
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream release is broken w.r.t autoreconf, patch 0002 fixes it.
Needed to prepare for upcoming patch to fix linking against newer
flex versions.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tmux uses 256 color version of 'screen' terminfo by default, so copy
corresponding file to support that usecase.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libiconv doesn't build with gcc 6 due to a macro in stdio.h using gets()
which has been removed with the C11 standard.
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
With libiconv 1.15, this macro is protected by
#if HAVE_RAW_DECL_GETS && !defined __cplusplus
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
#endif
Fixes:
http://autobuild.buildroot.net/results/61b/61bbfc839f99feb043d3456f107429d6e5319258
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-fix-CVE-2017-1000367.patch already included in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even when locales are enabled, gettext is not mandatory to build
grep, i.e the following defconfig builds fine:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.02-1096-g54a5333.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_GREP=y
However, if gettext provides libintl, it gets used. Therefore this
commit moves gettext from a mandatory dependency to an optional
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fetchmail itself does not need zlib, there is no reference to it in its
source, so the "select BR2_PACKAGE_ZLIB" is not necessary. Moreover,
"zlib" was not added to FETCHMAIL_DEPENDENCIES (but was anyway in the
dependency chain through openssl).
In addition, LIBS="-lz" is only needed in static linking configurations,
to help fetchmail's configure script find OpenSSL (it doesn't use
pkg-config unfortunately).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even when locales are enabled, gettext is not mandatory to build
fetchmail, i.e the following defconfig builds fine:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.02-1096-g54a5333.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_FETCHMAIL=y
However, if gettext provides libintl, it gets used. Therefore this
commit moves gettext from a mandatory dependency to an optional
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uses a genimage feature to rename the uImage file instead
of manually creating a symlink in the post-image script.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono the version 4.8.1.0. Simultaneously it removes an
upstreamed patch and updates another one to the latest source code.
It also disables the compilation of 'aot' cause the build system was
fixed to support this option again.
It also disables the compilation of the optional BoringTLS stack: this
stack is distributed as an external component inside the mono source
tree and it carries it's own build system (cmake). To be compiled inside
buildroot it requires hacking the mono build system to pass the correct
compiling options to cmake. This will be done in a future patch set.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable autoreconf because of missing install-sh.
Add upstream patch fixing build breakage with libtalloc is missing.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the two patches from gcc upstream master we can enable gcc 6.x for
microblaze again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping Go to 1.8.3 from 1.7.
Go 1.8 comes with significant performance improvements, particularly
around ARM: "CPU time required by our benchmark programs was reduced by
20-30% on 32-bit ARM systems."
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hwloc package consists of a library and utilities so it should be
installed to both the staging and target directories.
Signed-off-by: Graham Holland <gmh7@sfu.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed _SITE to github, current version is not available from upstream
website.
Removed patches applied upstream:
0002-Fixed-bugs-due-to-uninitialized-data-in-the-JP2-deco.patch
e96fc4fdd5
0003-Added-a-check-in-the-JP2-encoder-to-ensure-that-the-.patch
58ba0365d9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even if gcc 5 is still maintained for some time (gcc 5.5 is pending),
switch to gcc 6.x since it has been released since 2016-04-27 and
gcc 7.x is available since 2017-05-02.
We have been having toolchains in the autobuilders with gcc
6.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Extended _EXTRACT_CMDS and _INSTALL_TARGET_CMDS to handle updated
internal zip structure:
$ unzip -l ../dl/bootstrap-3.3.1-dist.zip
Archive: ../dl/bootstrap-3.3.1-dist.zip
Length Date Time Name
--------- ---------- ----- ----
0 2014-11-12 18:03 dist/
0 2014-11-12 18:03 dist/css/
[...]
$ unzip -l ../dl/bootstrap-3.3.7-dist.zip
Archive: ../dl/bootstrap-3.3.7-dist.zip
Length Date Time Name
--------- ---------- ----- ----
0 2016-07-25 15:53 bootstrap-3.3.7-dist/css/
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: better fix for the EXTRACT_CMDS, which consists in removing the
dist/ sub-directory.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building checkpolicy/test, the linker reports the following error:
cc dispol.o -lfl /usr/src/selinux/DESTDIR/usr/lib/libsepol.a -L/usr/src/selinux/DESTDIR/usr/lib -o dispol
/usr/lib/gcc/x86_64-pc-linux-gnu/6.2.1/../../../../lib/libfl.so: undefined reference to `yylex'
collect2: error: ld returned 1 exit status
According to flex documentation
(https://github.com/westes/flex/blob/master/doc/flex.texi), -lfl is used
to provide an implementation for yywrap(). However every flex file now
uses "%option noyywrap", which makes -lfl no longer mandatory. Remove
this option from checkpolicy Makefiles.
Patch taken from https://patchwork.kernel.org/patch/9450549/
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do want to build the flex binary when building host-flex since it's
needed as a build dependency for other packages.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 4.5.0 the iptables_common.h header is unused. Don't bother
patching this file.
Renumber the following patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Add a patch fixing struct ethhdr conflict using the Buildroot local if_ether.h
kernel header suppression patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fio package was disabled on uClibc because posix_madvise() was
back then not implemented in an official release of uClibc. It now
exists in uClibc-ng since its version 1.0.0, so we can assume it's
available. We already make lots of assumptions about external uClibc
toolchains, and they should definitely be using a recent version of
uClibc-ng to be usable by Buildroot.
Also, the Config.in comment was not handling this uClibc exception.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we have version 7.0, released July 2015. Latest upstream
release 7.1, which dates back to November 2015, causes build errors.
Therefore we bump to git HEAD, updated May 2017, which builds fine.
The package requires gcc-4.9 or later now:
2940c64283
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0001 already included in this release:
438274f938
Patch 0002 already included in this release:
43bc256d8a
Patch 0003 already included in this release:
1044b43637
Patch 0004 already included in this release:
9a72a69e03
Patch 0005 already included in this release:
5c080298d5
Patch 0006 already included in this release:
48780b4fcc
Patch 0007 already included in this release:
d60332057b
Patch 0008 already included in this release:
2ea32f7372
Patch 0009 already included in this release:
8283e4d1b7
Patch 0010 already included in this release:
47f2fb61a3
Patch 0011 already included in this release:
3cfd62d77c
Patch 0012 already included in this release:
0a76a8c765
Patch 0013 already included in this release:
66e7bd5952
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed self-computed sha1 hash, we already provide a sha256 hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-CVE-2017-5985-Ensure-target-netns-is-caller-owned.patch as
it has been integrated upstream
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also fixes compile error with gcc7:
dvbdevice.c: In member function 'bool cDvbTuner::SetFrontend()':
dvbdevice.c:848:31: error: call of overloaded 'abs(unsigned int&)' is ambiguous
frequency = abs(frequency); // Allow for C-band, where the frequency is less than the LOF
^
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to Linux kernel version 4.4.41 from the TI SDK 03.03.00.04
(TI SDK release date: 29.03.2017)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-Add-disable-tests-to-configure.patch as it has been
integrated upstream
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is finally possible to boot LEGO MINDSTORMS EV3 from the mainline
Linux kernel. This patch updates the defconfg to use the mainline kernel
instead of the custom ev3dev kernel.
[Peter: lock kernel headers version]
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add Python SQLite3 dependency that first appeared in 1.5.2.
[Peter: clarify that this is a runtime dependency]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also removes 0001-compat-don-t-re-define-program_invocation_short_name.patch,
since it's applied to upstream in this version.
Tested with:
qemu_ppc_g3beige_defconfig
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumps contain mostly translation updates:
package/kodi-pvr-argustv: bump version to 2.5.6
package/kodi-pvr-dvblink: bump version to 3.4.5
package/kodi-pvr-dvbviewer: bump version to 2.4.11
package/kodi-pvr-filmon: bump version to 1.4.9
package/kodi-pvr-hdhomerun: bump version to 2.4.7
package/kodi-pvr-hts: bump version to 3.4.24
package/kodi-pvr-iptvsimple: bump version to 2.4.11
package/kodi-pvr-mediaportal-tvserver: bump version to 2.4.19
package/kodi-pvr-nextpvr: bump version to 2.4.13
package/kodi-pvr-njoy: bump version to 2.4.3
package/kodi-pvr-pctv: bump version to 1.4.7
package/kodi-pvr-stalker: bump version to 2.8.6
package/kodi-pvr-vbox: bump version to 3.6.10
package/kodi-pvr-vdr-vnsi: bump version to 2.6.21
package/kodi-pvr-vuplus: bump version to 2.4.10
package/kodi-pvr-wmc: bump version to 1.4.9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch, so we don't need to autoreconf
Rename patch 0002 -> 0001
Add POWERTOP_SOURCE to adjust to the new archive naming.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter d in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter c in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter b in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping on all
of these Config files. This patch cleans up all warnings related to the
text wrapping for the Config files starting with the letter a in the
package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001 patch removed. It doesn't apply on this version and is also not
necessary since the AR binary is now handled correctly with AR = @AR@.
- 0002 patch removed. It's already included in this release:
a5cbe929ac
- The flex project has moved to GitHub, so modify the URLs in both
flex.mk and Config.in files.
- The sed command over Makefile.in to prevent the flex binary to be
built fails, so remove it. That logic has been moved to
src/Makefile.in, and whenever we disable the flex binary to be built
then the compilation fails when building the documentation because
some bits require "../src/flex", which is the flex binary.
We prevent building the flex binary and the documentation using a new
patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added --disable-concheck to avoid configure failure when libcurl is not
available:
checking for LIBCURL... no
configure: error: --enable-concheck requires libcurl library.
One would expect the concheck functionality to be automatically disabled
if libcurl is not found. But upstream wants to be explicitly disabled if
not wanted to prevent building NetworkManager without connectivity
check support without any evident warning on systems where libcurl is
not installed. See:
faa1b85dab
Proper support for concheck will be added in a subsequent patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New release adds a couple new features and improvements, although the
most important one - the test suite - doesn't really matter for
buildroot.
The project has also been relicensed under LGPLv2.1.
We need the m4 directory fixup now since the AC_CONFIG_MACRO_DIRS([m4])
macro was used in configure.ac, but we don't want to have unnecessary
files in the git repo.
New features:
- relicensed under LGPLv2.1
- implemented a unit testing framework together with a comprehensive
set of test cases
- added a non-closing variant of the gpiochip iterator and foreach
macro [by Clemens Gruber]
- added gpiod_chip_open_by_label()
Improvements:
- Makefiles & build commands have been reworked [by Thierry Reding]
- documentation updates
- code shrinkage here and there
- coding style fixes
- removed all designated initializers from the header for better standards
compliance
Bug fixes:
- fix the return value of gpiod_simple_event_loop()
- don't try to process docs if doxygen is not installed
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package can now be used for uClibc toolchains.
Tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED=y
BR2_PACKAGE_BLUEZ5_UTILS_EXPERIMENTAL=y
BR2_PACKAGE_BLUEZ5_PLUGINS_HEALTH=y
BR2_PACKAGE_BLUEZ5_PLUGINS_MIDI=y
BR2_PACKAGE_BLUEZ5_PLUGINS_NFC=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SAP=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SIXAXIS=y
BR2_PACKAGE_BLUEZ5_UTILS_TEST=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-6 correctly warns about a out of bounds access
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
check the end of array instead of beginning of next element to fix this
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
