Backport 2 patches from upstream (from 3.18-rc1) for gcc 5.x support and a
patch from Marco Franceschetti (https://github.com/vonfritz/kernel/) to fix
gcc 5.x compat issues in the bsp wifi drivers.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ntpq and ntpdc may depends on libedit and libcap.
$ arm-linux-readelf -d ./usr/bin/ntpdc | grep NEEDED
0x00000001 (NEEDED) Shared library: [libcap.so.2]
0x00000001 (NEEDED) Shared library: [libm.so.6]
0x00000001 (NEEDED) Shared library: [libedit.so.0]
0x00000001 (NEEDED) Shared library: [libncursesw.so.6]
0x00000001 (NEEDED) Shared library: [libssl.so.1.0.0]
0x00000001 (NEEDED) Shared library: [libcrypto.so.1.0.0]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libc.so.6]
However, build order with these libraries is not defined.
In order to keep things simple, we enforce build order even if ntpq/ntpdc are
not selected.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: use --without-lineeditlibs.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.11 brings commit 5f95e68daae397 ("clk: imx: fix integer overflow
in AV PLL round rate"), which fixes a PLL calculation bug, so bump to this
version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 8035ceb56c.
Moving to pseudo brought a number of issues (and longer compilation time),
so lets stick with fakeroot now that the reported ubi issue has been worked
around.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9386
GNU sed -i misbehaves on systems with SELinux enabled, as it tries to copy
to the SELinux security context (xattr) from the source file to to the new
destination file, which fails under fakeroot and leaves the file with 000
permissions, causing ubinize to fail when it cannot read to configuration
file.
So as a workaround, combine the install and tweak steps in a single
sed with a redirect to the destination file instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 4.7 introduced the sync_8 builtin functions for ARM. For ARM < v7,
this requires calling into the kernel. However, the failure path of
that call reports an error with the __write() function, which is a
glibc internal function. Therefore, it fails to link with uClibc or
musl. This was fixed in gcc 5.2.0, by replacing the __write() with
a plain write().
For sync_8 itself we have solved this with the conditions on
BR2_TOOLCHAIN_ARM_HAS_SYNC_8. However, the same function is also used
for the implementation of atomics.
For the internal toolchain, we can fix this by backporting the patch
to 4.9.4 and 4.8.5.
Fixes:
http://autobuild.buildroot.net/results/1db64b4830f499621e44523e0ef68191505e2ce9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Chrony has the ability to support PPS. Its enablement is determined
primarily from the existence of `sys/timepps.h`. This file is provided
from the pps-tools package. Adjusting Chrony's Makefile to depend on the
pps-tools package if a developer has included pps-tools as part of a
build. Relates to 2cfc966f43.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-python3 currently detect if there is an usable OpenSSL installation
and conditionnaly compiles the 'ssl', '_ssl' and '_hashlib' modules.
This may break compilation if the system's OpenSSL has been updated to
1.1.0 because of a bug in python, see https://bugs.python.org/issue26470
for details.
Unlike Python 2.7, Python 3 unconditionnaly compiles fallbacks for
common hash algorithm, so disabling OpenSSL will still leave Python 3
with implementations of common hash algorithm.
This adds a patch to configure.ac patch to implement a --disable-openssl
option.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of creating our own .pc file with a patch, just tell qmake to
do it by adding create_pc to CONFIG.
This corrects the .pc file for Qt5. Previously, the include directory
was set to /usr/include, while for Qt5 it should be /usr/include/qt5.
This hasn't caused any autobuild failures since no other package uses
qextserialport.
Note, however, that the package is now called Qt5ExtSerialPort in Qt5,
while before it was qextserialport like in the Qt4 case.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compact casesi patterns don't have a reload version. This causes build
failures of "trousers" package for ARC.
Current patch disables compact casesi patterns for ARCv1 (750D and 770D)
via passing "-mno-compact-casesi" option when compiling "trousers".
This change is a temporary workaround and the feature is going to be
fixed in the next ARC toolchain release version.
Fixes:
http://autobuild.buildroot.org/results/d2c/d2c16d8ba022b070c4dbeba5e7ea41f14d706691//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The distclean target no longer removes the "output" directory for
in-tree builds, because $(O) is no longer just "output" in that
case. Change the test to be against "$(CURDIR)/output", to match
the O setting, and a similar test elsewhere in the same Makefile.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gr-fec needs gsl. Without this dependency cmake search gsl in the host system.
This issue produce errors like :
arm-buildroot-linux-uclibcgnueabihf-gcc: ERROR: unsafe header/library path used
in cross-compilation: '-I/usr/include'
make[3]: *** [gr-fec/lib/CMakeFiles/gnuradio-fec.dir/reed-solomon/encode_rs.c.o] Error 1
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RHEL 5.x does have magic.h, but it does not define all expected symbols.
In particular, the NO_CHECK symbols were only added in file 4.20 and RHEL
5.x is using 4.17. Don't use magic.h and libmagic when building host
package.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, qextserialport will attempt to build a shared library.
qesp_static has to be set in CONFIG to build static. Note that
static+shared is not supported, in that case we just build shared.
The install target commands also have to be gated in that case,
because the *.so files don't exist. For completeness we both set
QEXTSERIALPORT_INSTALL_STAGING to NO and don't define
QEXTSERIALPORT_INSTALL_TARGET_CMDS for static builds, although one
of them would be sufficient.
Fixes:
http://autobuild.buildroot.net/results/c9233ad71fd60d0e6a85731a8bd4e598bd84947a
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qmake hardcodes the path to the sysroot in the install commands, so
we can't use it for target. But it's perfectly usable for staging.
By using 'make install', we get:
- the extserialport.prf file is installed to the mkspecs directory and
libqextserialport.prl in staging/usr/lib, so qmake can do its magic
and add the necessary compiler options;
- it also works for static build, when *.so files don't exist.
The QExtSerialPort and qextserialport.pc files are created by
Buildroot so they still have to be installed explicitly. Note that
upstream installs in the QtExtSerialPort directory, not QExtSerialPort,
so we follow that decision.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also adjust 0003-pkgconfig.patch to fix the header path.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Distinguish qt/qt5 by defining QEXTSERIALPORT_QMAKE, like is done e.g.
for quazip.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.8 brings commit 235bde1ed3f0ff ("net: fec: Call swap_buffer()
prior to IP header alignment"), which makes Ethernet functional again
on mx28.
Bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wscript checks the following.
'func': check_libs(['atomic'],
check_statement('stdint.h',
'int64_t test = 0;'
'test = __atomic_add_fetch(&test, 1, __ATOMIC_SEQ_CST)')),
and
'func': check_statement('stdint.h',
'int64_t test = 0;'
'__typeof__(test) x = ({int a = 1; a;});'
'test = __sync_add_and_fetch(&test, 1)'),
It fails if neither of these are available.
Fixes
http://autobuild.buildroot.net/results/8c20f719f784af1312294600e39004c1d382368a
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mplayer uses a homegrown configure script that calls 'gcc -v | tail -1'
to find the gcc version. However, our toolchain wrapper adds
-Wl,-elf2flt to the gcc arguments. This triggers gcc to do an actual
compile (rather than just printing version info and exiting), and that
compile fails because of the missing definition of main(). The last
line of the output is therefore:
collect2: error: ld returned 1 exit status
and configure doesn't find a version in there. It then falls back to
using the host gcc instead, which breaks things completely a bit
further down the line.
Since mplayer probably isn't very useful on noMMU architectures anyway,
just disable it completely for FLAT.
Fixes:
http://autobuild.buildroot.net/results/58cf28a3acd518633a1d8ea719bc70aefbdfb311
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xapp_xload tries to include protocols/rwhod.h, which isn't available on
musl. Fortunately, the package also has stub code that can be enabled
with -DRLOADSTUB (this is done e.g. on Cygwin).
This should probably be detected in configure, but that's a lot more
work.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the commit 6dd7bbb591, the label does
not need anymore to be quoted. Even worse it *must* not be simple-quoted,
unless the label will contain the double-quotes from the config variable
BR2_TARGET_ROOTFS_EXT2_LABEL.
The commit mentionned above has replaced echo by printf:
- echo "$$(ROOTFS_$(2)_CMD)" >> $$(FAKEROOT_SCRIPT)
+ $$(call PRINTF,$$(ROOTFS_$(2)_CMD)) >> $$(FAKEROOT_SCRIPT)
Since this commit the rootfs label contains extra double-quotes.
$ blkid
/dev/mmcblk0: LABEL=""BR 2016.08"" UUID="xxx"
^ ^
With this fix, the extra double-quotes have disappeared:
/dev/mmcblk0: LABEL="BR 2016.11-rc2" UUID="yyy"
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_EXTERNAL documentation improperly tells to use the
BR2_EXTERNAL_<name>_DIR variable to reference the location of the
BR2_EXTERNAL directory. But in fact the variable is named
BR2_EXTERNAL_<name>_PATH.
In addition, some closing double quotes were missing.
This commit fixes both of those issues.
Signed-off-by: Jerry Evans <g4@novadsp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The library uses the hypervisor instruction HVC, which is only
available on ARMv7-A with Hypervisor extensions. This is limited to
Cortex-A{7,12,15,17}.
In addition the build unconditionally passes -marm so it also needs
ARM instructions to be available, but that is already implied by the
CPU selection.
Implicitly fixes
http://autobuild.buildroot.net/results/53d109fd9055fd20387bb857aced5f89cf3086fd
though it is still not clear why ld doesn't accept the -Ttext=...
option there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: A12 and A17 also have the virtualization extensions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script uses this to set the -mcpu option. If nothing is
passed, it defaults to -mcpu=cortex-a15 for arm, and -mcpu=cortex-a57
for aarch64, which may conflict with the actual architecture.
The --processor option is only really used for arm and aarch64, but it
doesn't hurt to also pass it for the other arches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously the vdk solution was using a Linaro kernel that doesn't
build with gcc 5.x.
Since there is no point in using Linaro anymore for this solution,
this patch makes the aarch64 vdk defconfig point to the 4.6 Linux
kernel.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai user space tools fail to build for bfin target since it's
provide it's own pthread_atfork(), shm_open() and shm_unlink()
definition using the inline keyword and weak attribute.
With gcc 5+ the weak attribute is discarded by the inline keyword,
so each symbol are global and are redefined several time while
linking.
Fixes:
http://autobuild.buildroot.net/results/0c2/0c2e5eb4edd4f9427f61d3c9b67a12a7a0e24140
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add reference to upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb arc-2016.09-rc1 is based on upstream 7.12 gdb version where we can
still disable C++ build. For more information take a look at:
https://sourceware.org/gdb/wiki/cxx-conversion
We wanted to build gdb with C++ as it is used as default in 7.12
and is even a mandatory requirement since 2016/09.
But unfortunately we missed one runtime failure that C++ build causes
and so now we have to disable C++ build.
When gdb arc-2016.09-rc1 is built as a C++ application it segfaults at
runtime for ARC.
We are going to fix the issue in 2017.03 ARC toolchain release. and
before this we remove C++ dependency are adding temporary workaround
to prevent runtime segfaults.
The workaround is to disable building gdb as C++ application via
passing --disable-build-with-cxx config option when building gdb for
ARC.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avoid duplicated struct fbdev_window definition (introduced by [1]) by
renaming struct fbdev_window to shadow_fbdev_window.
Fixes [2]:
qeglfsmaliintegration.cpp:45:8: error: redefinition of 'struct fbdev_window'
struct fbdev_window {
^
In file included from /accts/mlweber1/rc-buildroot-test/scripts/instance-0/output/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/EGL/eglplatform.h:28:0,
from /accts/mlweber1/rc-buildroot-test/scripts/instance-0/output/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/EGL/egl.h:36,
from ../../../eglfs/qeglfsglobal.h:45,
from ../../../eglfs/qeglfsdeviceintegration.h:48,
from qeglfsmaliintegration.h:37,
from qeglfsmaliintegration.cpp:34:
[1] https://code.qt.io/cgit/qt/qtbase.git/commit/?h=dev&id=58bed4cda98e8e25db8adc61c7db73b6853077dc
[2] http://autobuild.buildroot.net/results/48c/48c458c035162169e8ca7c34ae65e9064822f25a
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of dtv-scan-tables to version
ceb11833b35f05813b1f0397a60e0f3b99430aab in commit
b1c8794d8a, one file contains non-ASCII
characters, which causes encoding issues tvheadend. Since no other
file in the dtv-scan-tables code base contains files with non-ASCII
characters (despite having files named after cities in various
countries that definitely do have non-ASCII characters), we rename
this file so that it is named with only ASCII characters.
This fixes the build of tvheadend, which was failing when the host
Python interpreter was python3, due to a file name encoding issue.
Fixes:
http://autobuild.buildroot.net/results/1ae8bee297edb089535a2fb6ec724ebf7976888d/
(tvheadend)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we upgrade U-Boot version to 2016.11 in
"snps_axs101_defconfig" and "snps_axs103_defconfig".
Important fixes: new version fixes U-Boot build for arc700. Since
gcc-6.x "-marc700" option is no longer supported, "-mcpu=arc700"
should be used instead.
We haven't sent it before as we were waiting for U-Boot 2016.11
release.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: as reported by Alexey, this commit is in fact a bug fix: it
makes the defconfig work properly. Indeed, since the ARC compiler has
moved to gcc 6.x, the ABI has changed, and a Linux 4.8+ kernel is
needed for userspace to work on ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should include config.h from sanei_backend.h in order to use the
correct if/else HAVE_FOO.
For some reason with Glibc or uClibc there is no problem but with musl
we have the following weird issue:
In file included from epsonds.h:41:0,
from epsonds-jpeg.c:18:
../include/sane/sanei_backend.h:99:33: error: expected ';', identifier or '(' before 'int'
../include/sane/sanei_backend.h:99:33: warning: useless type name in empty declaration
That's because HAVE_SIGPROCMASK is not defined although it's correctly
detected by the configure script.
$ grep config.log
config.log:#define HAVE_SIGPROCMASK 1
So, include config.h to avoid to redefine sigset_t.
Fixes:
http://autobuild.buildroot.net/results/9f1/9f1f1cb727b5c5407e69172280a3dee880e55cdf
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When statically linking with gnutls, we get definition clash error for
base64_encode which is also defined by gnutls.
This commit adds patch to rename base64_{encode,decode} defined in wget.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building wget with openssl in static libs configuration, wget
build system fails detect openssl because it doesn't specify LD flags
for private libs used by openssl. This specifically happens when we
pass --with-libssl-prefix to configure which tries to find ssl using
custom flags. If we don't specify --with-libssl-prefix, it relies on
pkg-config files to detect ssl and it's LD flags which helps with static
linking.
This commit removes --with-libssl-prefix conf opts. Since this case is
similar to gnutls, we remove same conf opts for gnutls as well.
wget can be built with either gnutls or openssl crypto libraries, so
separate optional support for both is not required. This commit also
does minor optimization by checking for either gnutls or openssl while
at it.
Fixes:
http://autobuild.buildroot.net/results/c6a/c6abdff37b86471cf8b0ceffeff5472042923de0/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-8693: Double free vulnerability in mem_close
CVE-2016-8692: Divide by zero in jpc_dec_process_siz
CVE-2016-8691: Divide by zero in jpc_dec_process_siz
CVE-2016-8690: Null pointer dereference in bmp_getdata triggered by crafted
BMP image
CVE-2016-2089: matrix rows_ NULL pointer dereference in jas_matrix_clip()
CVE-2016-8886: memory allocation failure in jas_malloc
CVE-2016-8887: Null pointer dereference in jp2_colr_destroy
CVE-2016-8884, CVE-2016-8885: Null pointer dereference in bmp_getdata
(incomplete fix for CVE-2016-8690)
CVE-2016-8880: Heap buffer overflow in jpc_dec_cp_setfromcox()
CVE-2016-8881: Heap buffer overflow in jpc_getuint16()
CVE-2016-8882: Null pointer access in jpc_pi_destroy
CVE-2016-8883: Assert in jpc_dec_tiledecode()
Drop upstream patches.
Change SITE to the official download location, since the current one does not
have the updated version. Unfortunately, the official site only offers tar.gz.
Fix license. It is "based on the MIT license", but not exactly the same
(http://www.ece.uvic.ca/~frodo/jasper/; under "Legal Issues").
Drop autoreconf; the autotools version has been updated since commit
324ccec90d (jasper: autoreconf to fix rpath issue) that introduced it.
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig was mistakenly removed by commit
78ac39cb89 due to an improper conflict
detection in "git am". This commit restores it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sama5d4ek defconfig has been removed in commit
9cb0b37cbd267ec1c2beea3deeaa86846bc2d037, but the board/atmel/readme.txt
file was not updated accordingly. This commit fixes that.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Atmel sama5d4ek board is no longer sold. Since there is the Xplained
board and we won't maintain anymore the EK board, the defconfig can be
removed. In addition, the defconfig was failing to build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to linux4sam_5.5 and remove dtb variants which are no longer
supported. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have a wrapper that makes pseudo behaves like the fakeroot of the
good ol' days. So the symlink will just magically keep old scripts
working as they did before the switch to pseudo.
However, using fakeroot is deprecated, and we want people to stop using
it altogether and switch to pseudo.
So, make the wrapper recognise how it's called, and if called as
fakeroot, print a warning message.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Running pseudo is more involved than running fakeroot. In the transition
from using fakeroot, we just did not account for the extra requirements.
First, we explicitly tell pseudo where it is, otherwise it tries to
guess. Its guess is correct, but it prints a warning, which is not nice.
Second, we tell it where to find the passwd and group files in case it
has to emulate access to them. We currently do not use that feature, but
better safe than sorry.
Third, pseudo spawns a background daemon, and talks to it (when fakeroot
would emulate the state all in the current process' state, pseudo uses
the daemon to coordinate the state across multiple processes). We are
not much interested in the daemon lingering around, so we just tell it
to terminate as soon as the last clients quits (this can take up to one
second).
Fourth and last, pseudo always stores its internal database when
exiting, and reloads it when spawned. The database is by default stored
in a sub-directory of the prefix it was installed in, but this is
impractical for us. We want the database to be specific to the one
config dir we are building, so we store the database in a (hidden)
sub-dir of the build dir, thus ensuring it is never shared with another
build. That directory is hidden (starts with a dot) because we consider
that to be our internal state that we do not want to expose to the user.
The wrapper has to be relocatable, so we avoid using hard-coded paths
in there: we derive those paths fom the runtime path of pseudo. However,
the build directory $(BUILD_DIR) is not available in the environment
(we do not export it because it conflicts with some buildsystems).
Instead, we use $(BASE_DIR) which is exported.
Finally, when relocated, the wrapper would not be used in the Buildroot
environment, so may not have access to TARGET_DIR or BASE_DIR, unless
the user sets them. If he does not, we still want the wrapper to be
working (to avoid the warning about the prefix, and to exit the daemon
asap); thus we leave the passwd and localstatedir variable alone if we
don't have what it needs to set them, rather than set them to incorrect
values.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If 'lib' is a symlink (as is the case when BR2_ROOTFS_MERGED_USR=y),
'find lib' does not return the correct result. So, until now,
libpthread*.so* and ld-*.so* were not stripped when 'lib' was a symlink.
We fix this by using 'find lib/' instead of 'find lib'. For consistency
reason, we also do the same change for the 'find' that removes .a and
.la files.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: slightly improved the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Calao Systems company has gone bankrupt in April 2016, and the
domain name no longer exists, so there is no chance to ever contact
Gregory Hermant at a @calao-systems.com address, so let's remove his
entry from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The calao defconfigs no longer build with gcc 5.x, due to Linux kernel
versions used being too old. However, it is unlikely that anyone will
ever update them, since Calao Systems has gone bankrupt in April 2016.
Therefore, let's remove them. If anyone is interested again at some
point, it will be easy to revive them from the Git history.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this toolchain, guile tigger an assembler error with -Os which is
probably caused by the binutils version being used:
arm-none-linux-gnueabi-ld --version
GNU ld (Sourcery CodeBench Lite 2014.05-29) 2.24.51.20140217
arm-none-linux-gnueabi-gcc --version
arm-none-linux-gnueabi-gcc (Sourcery CodeBench Lite 2014.05-29) 4.8.3 20140320 (prerelease)
Nowaday, even with a Buildroot internal toolchain using the oldest
Binutils GCC version (2.25.1 and 4.8.6), guile build fine with -Os.
So, force -O2 when this toolchain is used and BR2_OPTIMIZE_S is set.
Fixes:
http://autobuild.buildroot.net/results/976/976b3477407e64c8c2fc2309ed952d0083903a19
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comments in the Buildroot-provided php-fpm.conf would produce the
following error when starting php-fpm:
ERROR: [/etc/php-fpm.conf:2] value is NULL for a ZEND_INI_PARSER_ENTRY
Removing the comments fixes the problem.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Valgrind may use 'mpicc' (from openmi project) to compile libmpiwrap-*.so.
Without any option, it will detect and use 'mpicc' from host and generate
libmpiwrap-*.so for host:
$ file target/usr/lib/valgrind/libmpiwrap-arm-linux.so
target/usr/lib/valgrind/libmpiwrap-arm-linux.so: ELF 64-bit LSB shared object,
x86-64, version 1 (SYSV), dynamically linked, not stripped
We simply disable openmi support for valgrind.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: refactor with other unconditional CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python is not able to detect if compiler double representation is
compliant with IEE754:
checking whether C doubles are little-endian IEEE 754 binary64... no
checking whether C doubles are big-endian IEEE 754 binary64... no
checking whether C doubles are ARM mixed-endian IEEE 754 binary64... no
Accordingly 'legacy' mode isused. It is possible to check this at
runtime by check if 'sys.float_repr_style' contains 'short' or
'legacy'. Calculus correctness is not garanteed with 'legacy'.
Problem is better described here:
http://stackoverflow.com/questions/29920294/what-causes-pythons-float-repr-style-to-use-legacyhttps://bugs.python.org/issue7117
However, all gcc architecture use a representation compliant with
IEE754. So, we can enable it unconditionnaly.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: rework condition to not use strip, as suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python is not able to detect if compiler double representation is
compliant with IEE754:
checking whether C doubles are little-endian IEEE 754 binary64... no
checking whether C doubles are big-endian IEEE 754 binary64... no
checking whether C doubles are ARM mixed-endian IEEE 754 binary64... no
Accordingly 'legacy' mode isused. It is possible to check this at
runtime by check if 'sys.float_repr_style' contains 'short' or
'legacy'. Calculus correctness is not garanteed with 'legacy'.
Problem is better described here:
http://stackoverflow.com/questions/29920294/what-causes-pythons-float-repr-style-to-use-legacyhttps://bugs.python.org/issue7117
However, all gcc architecture use a representation compliant with
IEE754. So, we can enable it unconditionnaly.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: adjust condition to avoid usage of qstrip, suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Ingenic XBurst is a MIPS32R2 microprocessor.
It has a bug in the FPU that can generate incorrect results in certain
cases. The problem shows up when you have several fused madd
instructions in sequence with dependant operands.
Using the -mno-fused-madd option prevents gcc from emitting these
instructions. This patch adds changes to the toolchain wrapper to use
that option.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the kernel of release 4.1.15_2.0.0_ga, as it builds properly with
gcc 5.x, which is now the default.
We add a linux config fragment to disable the framebuffer, to repair the
build for imx_v6_v7_defconfig.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: adjust syntax in fragment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update 0002 patch to match the one sent as a pull request. The previous
one introduced a new problem that has been addressed in the new version.
Some Linux headers included in certain toolchains may not have an
updated linux/if_tunnel.h which includes linux/ip.h, so we need to
include it unconditionally otherwise linux/if_tunnel.h will use the
struct iphdr before being defined and the compilation will fail in this
way:
In file included from iptunnel.c:33:0:
/usr/include/linux/if_tunnel.h:37:16: error: field 'iph' has incomplete
type
struct iphdr iph;
^
Pull request URL:
https://sourceforge.net/p/net-tools/code/merge-requests/4/
Fixes:
http://autobuild.buildroot.net/results/34f/34f9b10ef6a613057e8f6457d8a0a2fa142ad123/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was previously hardcoded to use the 1st partition although the
bootpart variable was used to download kernel/dtb from any partition.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original submitter and follow-up contributors to the qmx6
defconfig no longer have the hardware available or the time/interest
to update this defconfig, which currently fails to build with gcc
5.x. Due to this, this commit removes this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig no longer builds with gcc 5.x, and the original
submitter, Gustavo, no longer has the hardware to test this
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT
in order to properly start the kernel (Error: unrecognized/unsupported machine ID)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated in any significant way since 2011,
when Peter moved it to use a mainline kernel. It's now using an
ancient 3.0 kernel, and a vendor-specific U-Boot version that fails to
build with various "undefined reference" errors:
undefined reference to `show_boot_progress'
undefined reference to `image_print_contents'
undefined reference to `wait_ms'
So it's time to get rid of the defconfig for this platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 0b6b67f34d ("jamvm: add patch to
fix musl build") introduced a patch to fix the jamvm build with the
musl C library. While the commit log pretends that the build was still
working with uClibc, it is not correct: it no longer builds fine with
uClibc on i386/x86_64, because the Buildroot default configuration for
uClibc doesn't enable <fenv.h> support.
Therefore this commit adapts the patch to use <fenv.h> if available
(which is the case with musl), and otherwise fall back to
<fpu_control.h>, which is available in uClibc.
Thanks to Waldemar for the investigation.
Fixes:
http://autobuild.buildroot.net/results/325a50d15e1836b31df4e84ba83b296abfb73041/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kvm-unit-tests package defines a KVM_UNIT_TESTS_ARCH variable, but
never used it. Due to this, on PowerPC64, we were passing an incorrect
value, causing a build failure.
In addition, once the KVM_UNIT_TESTS_ARCH is used, it appeared that
its value for x86_64 was incorrect, due a typo: it was x86_84 instead
of x86_64.
Fixes:
http://autobuild.buildroot.net/results/16836c02f4d1ab5df6b2e21a4fcdbbf4a7542f22/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration for the KwikByte KB9202 was added back in July 2008
(commit e27fef5183), and was never
updated since then. It still uses a 2.6.38 kernel, with the out of
tree patches from the former AT91 kernel maintainer. The board has
been discontinued according to its page at
http://www.kwikbyte.com/KB9202.html.
This defconfig no longer builds since the switch to gcc 5.x as the
default. Therefore, it's time to get rid of this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use makedevs to create device nodes in the target rootfs. However,
this can be called several times, e.g. when building several filesystem
images or when rebuilding. When makedevs is called the second time, the
device node already exists so mknod() errors out.
This wasn't noticed before because fakeroot's mknod() wrapper
(incorrectly) does _not_ error out when the file exists already. Now
we switched from fakeroot to pseudo, the problem becomes apparent.
Before creating the device node, check if it already exists and if so,
if it has the correct device type and number. Change of mode and
ownership is still done.
This approach was preferred over removing the target files before
creating them, which would be simpler. However, when e.g. a file exists
as a normal file and makedevs specifies it as a device node, that
really is an error so we should detect it.
The other types don't have to be changed. The 'd' (directory) type is
already OK because it already only creates directories if they don't
exist yet. The 'f' (file mode) and 'r' (recursive) types only operate
on files and directories that exist already.
Patch also sent upstream to busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In upstream busbyox, the code to create devices has been simplified:
the code for a single and for multiple devices is no longer duplicated.
Since we are going to change the device creation code next, it's
convenient to have only one copy to modify.
There are two behavioural changes with this, but they were introduced
silently together with other commits in upstream busybox.
- When mknod() fails, the chmod was still done. This is pointless so it
is no longer done now.
- There was a check for mode != -1; however, a mode of -1 would not
have worked anyway because all bits would be set for mknod(), which
would fail. So this check is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
czmq uses readdir_r(), which has been marked as deprecated in glibc
2.24, and czmq uses -Werror which causes the warning to be turned into
an error that aborts the build.
This commit fixes that by removing -Werror. Long-term, we might want
to upgrade czmq to a newer version, since they've removed the use of
readdir_r() in commit 2594d406d8ec6f54e54d7570d7febba10a6906b2. But
getting rid of -Werror is anyway always a good idea in Buildroot.
Fixes:
http://autobuild.buildroot.net/results/f6e4b8ed8571fdcf30eecae121dd11dfdef50799
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pseudo is not python3 friendly. It causes build failure on distros using
python3 as default python interpretor.
./maketables enums/*.in
File "./makewrappers", line 327
return """/* This function is not called if pseudo is configured --enable-force-async */
^
TabError: inconsistent use of tabs and spaces in indentation
File "./maketables", line 76
print "Flags: set for %s" % self.name
^
SyntaxError: Missing parentheses in call to 'print'
make[2]: *** [Makefile:150: wrappers] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile:147: tables] Error 1
Those patches make pseudo works with python2 and python3.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I accidentally removed the static build patch when bumping to v1.4.0,
thinking it was merged upstream as of this version, but it's not the
case (it's merged in master), so let's keep the patch file.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python3 complains about missing parentheses.
$ ./support/scripts/get-developers
File "./support/scripts/get-developers", line 45
print f
^
SyntaxError: Missing parentheses in call to 'print'
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With older SoCs and some SD cards, a 1024-bytes offset is needed to allow
ROM code to read the content of the FAT partition. As it is usual to get
a 1M bytes offset for the first partition, use this value to avoid boot
issues.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We've now entirely switched to using pseudo istead of fakeroot, so it is
time to remove the fakeroot package now.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 41f0688d91 ("fs/iso9660:
convert to the filesystem infrastructure"), the is9660 logic uses the
common filesystem infrastructure, so the dependency on host-fakeroot is
no longer needed, and has actually become bogus since we switched to
host-pseudo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Longer explanation of multi-BR2_EXTERNAL
- Mention nobody UID 99 -> 65534 change
- Mention removal of BR2_DEPRECATED
- Mention use of system cmake
- Mention new dependency on ExtUtils::MakeMaker. The other perl
dependencies are not mentioned since they only apply if mpv is built.
- Mention the $(STAGING_DIR)/$(O) check.
- Mention unsafe path detection in -isystem etc.
- Mention linux-tools split.
- Mention changes in legal-info.
- Mention that pseudo is used instead of fakeroot.
- Correct the info of toolchainfile.cmake: it still sets cflags but it
doesn't force them anymore (doesn't append).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig is affected by bug #8516, reported more than a year ago,
and nobody has updated the defconfig since then. In addition, it should
be migrated to the genimage mechanism instead of having its own
mkcubieboard.sh script.
Therefore, let's get rid of this defconfig.
Fixes bug #8516.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes linker error
http://autobuild.buildroot.net/results/c6272ac900d1a53b976839ac4f50a210b3e6b354
On powerpc64 (and powerpc64le) the build fails due to linker problems
because of an old (2003) workaround for powerpc64, presumably working
around an old toolchain problem that is no longer present. Removing
the workaround allows the build to succeed. A new patch is added for
this.
Additionally, there was a mistake in patch 3: the patch added a test
for HAVE_LIBDL to include/alsa-symbols.h but it was positioned in the
file before config.h was included, so HAVE_LIBDL is never seen as
defined. The test was also using HAVE_LIBDL (which indicates the
library) rather than HAVE_DLFCN (which indicates the header).
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes a struct redefinition problem like this one:
================================
In file included from /usr/include/linux/if_tunnel.h:6:0,
from iptunnel.c:34:
/usr/include/linux/ip.h:85:8: error: redefinition of 'struct iphdr'
struct iphdr {
^
In file included from iptunnel.c:29:0:
/usr/include/netinet/ip.h:45:8: note: originally defined here
struct iphdr
^
================================
iptunnel.c includes netinet/ip.h which contains a definition of the
iphdr struct.
iptunnel.c also includes linux/if_tunnel.h which includes linux/ip.h
which contains a definition of the iphdr struct.
So, both netinet/ip.h and linux/ip.h define the iphdr struct, and both
of them have been included directly or indirectly by iptunnel.c. Because
of that the compilation fails due to a struct redefinition.
The problem can be solved by just not including netinet/ip.h.
The patch has been sent upstream as a merge request:
https://sourceforge.net/p/net-tools/code/merge-requests/3/
Fixes:
http://autobuild.buildroot.net/results/dce/dce499da84b2a41bab946d5109a283ccb85c8b81/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configs/mx6udoo_defconfig supports the quad and dual-lite variants,
so there is no need to keep udoo_quad_defconfig anymore.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The top-level Makefile contains an "override O := $(O)" statement that
is purportedly required to make sure the O flag doesn't leak into the
environment of sub-makes. However, since commit 173135d, there is
already an "override O := ..." a few lines down. Therefore, the first
override is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We reset MAKEOVERRIDES to avoid passing down variables that are
overridden on the command line to the package build systems. Indeed,
the variables overridden on the command line will be Buildroot
variables and not relevant to the package build system. In particular
the O option is used by some packages and the value passed in on the
command line is plain wrong for the individual package.
However, in commit 916e614b, MAKEOVERRIDES was moved earlier and it
was reset _before_ re-entering make in the cases when something has
to be fixed up (incorrect umask, non-absolute paths in O or CURDIR).
Therefore, if make is re-entered, any command line overrides are lost.
This particularly bites the autobuilders, because they use
O=<relative path> to specify the output directory, and they add
BR2_JLEVEL=... to avoid starting too many jobs in parallel. The
BR2_JLEVEL override is lost.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
- quad-core Cortex-A7 @1.2GHz
- 256 or 512MiB of DDR
- uSDCard as only storage option
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
- 1x USB 2.0 OTG (also used as power source)
- 10/100 etehrnet MAC
- GPIOs, SPI, I2c...
Support for the Nanopi NEO in U-Boot and Linux is very recent, so much
so that we have to use an -rc tag for U-Boot and a special Linux tree.
As for Linux, I pushed a git tree on Github with a single tag that
matches what is currently queued in the sunxi-next queued for 4.10,
based on 4.9-rc3. All those commits are from Maxime's tree, the
maintainer for most sunxi stuff.
This also means that we can't use the Linux headers from the kernel
being built (which is what we usually do) because those report 4.9,
while Buildroot currently knows only of 4.8 at best. So this is what we
use.
Unfortunately, support for the ethernet MAC and the USB OTG are not yet
upstream, but are being actively worked on.
The Nanopi NEO is very similar to the Orangepi PC, so I was able to
scanvenge most of its configuration. ;-)
Thanks Maxime for your help on IRC! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pseudo is a program that can either be used directly or as an
LD_PRELOAD, which allows these operations to succeed as if the
user did have system administrator privileges even though they
are an ordinary user.
Pseudo has a lot of similarities to fakeroot but is a new
implementation that improves on the problems seen using fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tinyalsa has started doing release, so we will use it.
With this release, both our patches were applied mainline:
- 0001-tinypcminfo-make-function-pcm_get_format_name-static.patch [1]
- 0002-asound.h-include-time.h-to-get-struct-timespec-proto.patch [2]
The Makefile has changed a lot, so we take advantage of that to simplify
our package.
1. 7d204edfe8
2. c8333f8c7a
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: add patch to remove doxygen usage.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Babeltrace 1.4, there is support for printing debug information
along with compatible traces and event records. Babeltrace needs
elfutils in this case.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
[Thomas:
- add better description for
0002-m4-ax_lib_elfutils.m4-add-cache-variable.patch
- use automatic dependency on elfutils rather than a very complicated
Config.in symbol]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although Babeltrace is available for all major Linux distributions, some
of them have a quite old version of this project.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current patches are dropped because they were merged upstream.
The new patches exist to fix the build with musl. They were submitted on
the lttng-dev mailing list, but not merged yet, or not merged in 2.8.2.
LTTng-tools now has its man pages written in AsciiDoc and they get
converted to troff at build time. This is not needed in a Buildroot
image anyway.
The --enable-lttng-ust/--disable-lttng-ust configure options are renamed
to --with-lttng-ust/--without-lttng-ust in v2.8.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds an ev3dev Linux drivers extension that provides Linux kernel
drivers for LEGO MINDSTORMS EV3 from the ev3dev project.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a script to create SD card and flash images for LEGO MINDSTORMS
EV3 using the genimage tool.
The default kernel config had to be modified to add support for squashfs
and to add a ram disk.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds U-Boot configuration for LEGO MINDSTORMS EV3. U-Boot has
had support for LEGO MINDSTORMS EV3 since v2016.05.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-8864 - denial-of-service vector which can potentially be
exploited against BIND 9 servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: fix hash URL in .hash file, noticed by Vicente.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List of fixed CVEs:
CVE-2016-8615: cookie injection for other servers
CVE-2016-8616: case insensitive password comparison
CVE-2016-8617: OOB write via unchecked multiplication
CVE-2016-8618: double-free in curl_maprintf
CVE-2016-8619: double-free in krb5 code
CVE-2016-8620: glob parser write/read out of bounds
CVE-2016-8621: curl_getdate read out of bounds
CVE-2016-8622: URL unescape heap overflow via integer truncation
CVE-2016-8623: Use-after-free via shared cookies
CVE-2016-8624: invalid URL parsing with '#'
CVE-2016-8625: IDNA 2003 makes curl use wrong host
Full ChangeLog:
https://curl.haxx.se/changes.html#7_51_0
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add -P for overriding the password prompt we search for
- Add -v for verbose logging of the prompt detection prompt.
- Allow packagers and compilers to change the default password prompt.
- When giving -V, also print the default password prompt.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog
- Upgrade license chksum to v14 EULA
- Check for lib_src_ppp_arm11_elinux.so library before removing
- Fixes for error hadling and robustness
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/78856879
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bug Fixes for P8.6 Graphics includes:
3D: MGS-2239 Destroy EGL window surface and makecurrent new surface
cause segmentation fault
3D: MGS-2237 [6Q-SDB] FB met GPU STATE DUMP when testing ES30
Conformance 100%
3D: MGS-2101 EGLImage created with an OpenVG parent image always returns
EGL_BAD_ACCESS
3D: MGS-2086 Met GPU dump when do driver test under dvfs stress test
3D: MGS-2150 optimized vertex copy for attribute upload
3D: MGS-2100 CubeMap sub-texture copy disappears when small size and
small x/y offset
3D: MA-8321 testTextureViewStress200Hz fail on kk4.4.3_2.0.1 with GPU
5.0.11p8
3D: MA-8302 testOpenGlEsVersion fail on kk4.4.3_2.0.1 with GPU 5.0.11p8
3D: MA-8300 Fix antutu3.0.3 2D/3D performance downgrade
3D: MA-8104 fix Antutu6.x benchmark 3D not supported issue
3D: MA-8110 Change NOTIFY_OK to NOTIFY_DONE in task_notify_func.
3D: MGS-1851 fix the integer id resource leak
3D: MGS-1845 refine es11 extension
3D: MGS-1717 display no output when use gplay to do loopback test
Compiler: MGS-1948 Fix UBO in shader can not support by new bsp release.
2D-VG: MGS-2154 VG kernel driver Allocate and Free wrong memory type
2D-VG: MGS-2089 fix gc355 vg freeze with interrupt signal
2D-VG: MGS-2084 fix vg pbuffer memory leak
2D-VG: MGS-1756 Portability issue: OpenVG includes "malloc.h" instead of
"stdlib.h" for malloc() function
2D: MA-8378 Refine g2d and gpu helper functions.
2D: MGS-1847 fix G2D build broken with g2dBUILD_FOR_VIVANTE=1
General: MGS-2243 Fix high impact Coverity issue in GPU kernel driver
General: MGS-2233 fix gpu axi bus error with process kill operations
General: MGS-2188 Fix misleading indents causing errors in gcc6
General: MGS-1624 QNX - port gmem_info tool
General: MGS-1630-1 5.0.11.p8 driver can't pass build with kernel 4.1 on
Android M6.0
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/de26bc15
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
Coverity fixes for resources leaks, null dereference, string overflows
and checking return.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/b138b5b0
Implicitly tested through gstreamer as the plugins rely on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LTTng-modules, starting from v2.8, has a mechanism to be built directly
into a Linux kernel image, that is, not as loadable kernel modules. For
this the `CONFIG_LTTNG_CLOCK_PLUGIN_TEST` and `CONFIG_LTTNG` Make
variables were introduced. They need to be explicitly set to `m` here to
build the project as loadable kernel modules.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the --enable-python-agent configure option to build the LTTng-UST
Python agent when Python 2 or Python 3 is also part of the BR image. The
LTTng-UST Python agent is a Python package which adds LTTng tracing to
Python's standard logging when imported.
Disable the Python agent otherwise.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two current patches are removed because they were merged upstream.
The new patch is needed to build with uClibc. It was also submitted
upstream, but not merged as is yet. Defining NT_GNU_BUILD_ID to 3 when
it's not defined seems like it's something done in other projects. This
definition's value should never change (number of the build ID note
section in ELF objects).
LTTng-UST now has its man pages written in AsciiDoc and they get
converted to troff at build time. This is not needed in a Buildroot
image anyway.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the standard sdcard.img format that can be directly copied
to the SD card.
Remove the custom create-boot-sd.sh script and update the readme.txt
file accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: further tweaks to readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump to 4.7, Xen fails to build because of a double definition
of __OBJECT_FILE__. This is due to (who would have guessed) the weirdness
of their buildsystem.
Fix that with a dirty hack: undefine the macro before defining it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alistair Francis <alistair.francis@xilinx.com>
[Alistair: Tested on ARMv7 (little endian) boot.]
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Expose the Kconfig-related help commands when U-Boot uses the Kconfig
configuration. Like others (like Linux, barebox, busybox), only expose
menuconfig, not all the configurators.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment from trinity Config.in currently does not show up in
menuconfig for glibc or uClibc toolchains with older headers.
This commit fixes the logic so that it shows up when either one of the
dependencies from trinity are not met.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adjust default config patch to match new major version.
localhost binding is now default so drop it, 300s keepalive is now
default as well (instead of 60s from the previous patch and 0 by
default) - which sounds reasonable so keep it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The network-manager.mk passes --mandir=$(STAGING_DIR)/usr/man/, which
causes man pages to be installed in
$(STAGING_DIR)/$(STAGING_DIR)/usr/man and
$(TARGET_DIR)/$(STAGING_DIR)/usr/man.
This is definitely bogus and causes some build failures thanks to the
new check added by Yann E. Morin. This option was in
network-manager.mk since the addition of the package. Maybe it was
fixing a bug in the package logic back at the time, but nowadays, it
causes an installation at the wrong location. Without this commit, the
man pages are properly installed at the right location.
Fixes:
http://autobuild.buildroot.net/results/92683749b0b8e726bc83781ca6d8e103428362ba/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is required for the upcoming evince package which checks for adwaita
presence via pkgconfig file, which normally resides in staging.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For musl we need patches for bintils 2.25.1 and 2.26.1.
Binutils 2.27 and gcc 6.2.x does not work for microblaze,
even not for uClibc-ng or glibc.
For gcc 5.4.x the existing patch need reworking so that
musl and uClibc-ng is supported.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- Add proper description for the binutils patches
- Use BR2_microblaze instead of BR2_microblazeel and BR2_microblazebz]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently buildroot will create a broken system for any kernel version
not between 3.18 and 4.1, as the bnx2x firmware it includes is only
valid for that version of the upstream driver.
This change modifies the build so that all versions are included as there was a
strong preference for not adding options for each version, nor only supporting
the latest kernel:
On Fri, Feb 26, 2016 at 7:09 PM, Thomas Petazzoni wrote:
> I think adding new config to chose between different versions of a
> given firmware is going a bit too far. If we were to do that for all
> firmwares in linux-firmware, it would really increase the number of
> Config.in options too much.
>
> Shall I suggest to install both versions of the firmware? The firmware
> files are not that large, and if filesystem size is really a strong
> issue, it is always possible to clean up the non-required firmware
> files in a post-build script.
On Wed, Mar 2, 2016 at 7:47 AM, Arnout Vandecappelle wrote:
> No, this is certainly not good, it fixes 4.2+ and simultaneously breaks 4.1-.
>
> What is wrong with Thomas's proposal to remove the unneeded versions in a
> post-build script? If your size is so important that 640K matters, you would
> probably anyway want to keep only one of the six binaries instead of three
> different chip revisions.
It is up to the user to ensure they remove the versions they don't want.
Note that this increases the size of the root file system by about 8MB.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change log since last version bump:
2cb6695 Add missing -c for write_reliability
e094e28 Fix return value check from set_partitioning_setting_completed()
f90eac4 Add help texts for -c option
752072d Add -c option for partitioning commands
55380d9 Register being set is other than mentioned in printed message.
3c02759 Fix reported offset for enhanced user area start address
a3d3331 mmc-utils: Add Command Queue fields to Extended CSD
0ca049f mmc-utils: Add ability to configure write protect on an eMMC device
bb779ac mmc-utils: Add disable partition boot to 'mmc bootpart enable'
89cd01e mmc_utils: add ffu support
4af1749 mmc-utils: Merge the lsmmc tool into mmc-utils
44f94b9 mmc_utils: doc: add man-page
928ff07 mmc_utils: gp create: only allow partition [1-4] to be selected
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARCH_SUBDIR is computed based on the value of ARCH_SYSROOT_DIR and
SYSROOT_DIR. For nested toolchains ARCH_SYSROOT_DIR is a subdir of
SYSROOT_DIR, so a sed command like this one...
sed -r -e "s:^${SYSROOT_DIR}(.*)/$:\1:"
...basically removes the leading SYSROOT_DIR part from ARCH_SYSROOT_DIR.
But, for side-by-side sysroot toolchains ARCH_SYSROOT_DIR and
SYSROOT_DIR are at the same level, so the above sed command doesn't
make any effect.
This patch therefore improves the calculation of ARCH_SUBDIR to
clearly handle the three possible cases:
- There is a single sysroot, or the selected architecture sysroot is
the main one (i.e SYSROOT_DIR == ARCH_SYSROOT_DIR). In this case,
ARCH_SUBDIR is empty.
- There are side-by-side sysroots, such as
SYSROOT_DIR=.../sysroot/mips-r2-hard/ and
ARCH_SYSROOT_DIR=.../sysroot/mipsel-r2-hard/.
- The arch-sysroot is nested, such as SYSROOT_DIR=.../sysroot and
ARCH_SYSROOT_DIR=.../sysroot/armv4t/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: improve the logic to handle the SYSROOT_DIR==ARCH_SYSROOT_DIR
case.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (namely x86-64), glibc may provide a libmvec
library since glibc 2.22, which programs built with gcc OpenMP support
might get linked to.
In order for these programs to work on the target, we need to copy
this library to the target filesystem.
This commit takes care of this for the external toolchain
situation. Note that libraries listed in TOOLCHAIN_EXTERNAL_LIBS are
silently ignored if they don't exist. Therefore, we don't need to have
any condition on the architecture or glibc version.
For more details on libmvec, see
https://sourceware.org/glibc/wiki/libmvec.
Fixes bug #9111.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some architectures (namely x86-64), glibc may provide a libmvec
library since glibc 2.22, which programs built with gcc OpenMP support
might get linked to.
In order for these programs to work on the target, we need to copy
this library to the target filesystem.
This commit takes care of this for the glibc package (used for the
internal toolchain backend). Note that libraries listed in
GLIBC_LIBS_LIB are silently ignored if they don't exist. Therefore, we
don't need to have any condition on the architecture or glibc version.
For more details on libmvec, see
https://sourceware.org/glibc/wiki/libmvec.
Fixes bug #9111.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages misbehave, and install files in either $(STAGING_DIR)/$(O)
or in $(TARGET_DIR)/$(O) .
One common reason for that is that pkgconf now prepends the sysroot path
to all the paths it returns. Other reasons vary, but are mostly due to
poorly writen generic-packages.
And a new step hooks to check that no file gets installed in either
location, called after the install-target and install-staging steps.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
perl may fail to build on newer host architectures such as aarch64 due
to its inability to guess the host architecture to build 'miniperl',
which is built during the process. An error message looks like this:
Configuring build-time miniperl for unknown
ERROR: No $target defined (?!)
ERROR: configure --mode=buildmini failed
This happens because the config.sub and config.guess files from perl are
not modified and may become outdated.
These files are normally updated automatically by a Buildroot hook for
autotools packages, to avoid problems like these.
Although perl uses the config.sub and config.guess files, it is not a
strict autotools package, so it is not defined as an "autotools-package"
in Buildroot and so it doesn't inherit the hook.
This commit makes perl borrow the hook from the autotools infrastructure
so that it can build on newer build architectures.
This has been tested by building it on an aarch64 host machine.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Also remove ac_cv_linux_vers caching since this check was remove in upstream
commit f3e011b18c55ae.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can avoid host headers using a --with-libnl parameter to override the
default host headers path. The configure script adds /include suffix to the
include path. So we still need to manually add -I with the correct path to
CFLAGS because libnl headers are under the libnl3/ directory.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains the Freescale manufacturing tool.
It is designed to program firmware to i.MX boards during production.
The communication is done over USB using the Freescale UTP protocol.
The project is maintained on NXPMicro Github repository:
https://github.com/NXPmicro/mfgtools
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- remove dependency on host-cmake, this is handled by the
host-cmake-package infrastructure
- add quotes around $(HOSTCXX)
- add CPOL.htm to <pkg>_LICENSE_FILES.
- tweaks to the readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On x86 (both i386 and x86_64), the kvm-unit-tests code uses
__builtin_reachable, which appeared in gcc 4.5. This commit adds the
relevant dependencies to kvm-unit-tests:
- on i386, we need gcc 4.5 as the target compiler
- on x86-64, we need gcc 4.5 as the host compiler, because we use the
host compiler to build kvm-unit-tests for this architecture
Fixes:
http://autobuild.buildroot.net/results/21340a7e6494e23adb2fe8dc6253ab220c380fec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of new dependencies in the
kvm-unit-tests package, add the BR2_HOST_GCC_AT_LEAST_4_5 symbol.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump includes several fixes for x86 and a significant fix
to powerpc transactional memory tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kvm-unit-tests requires a multilib compiler for x86_64 as it compiles
32bit boot code.
This patch uses the BR2_HOSTARCH_NEEDS_IA32_COMPILER option to enforce
this and avoids using TARGET_CROSS for x86_64 targets and uses the host
32bit (and 64bit) capable compiler.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas: reword comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lib/colors.c uses HAVE_LIBTINFO to decide whether term.h and ncurses.h
should be included. However, the configure.ac check is bogus: it
checks for tinfo using pkg-config, and then if it fails, checks with
AC_CHECK_LIB(). So, if you have tinfo installed, but not the
corresponding development package, the pkg-config test will fail, but
the AC_CHECK_LIB test will succeed, even though the headers are not
available.
To address this, we explicitly tell host-util-linux that tinfo is not
available, like we're already doing for ncurses.
Fixes:
http://autobuild.buildroot.net/results/3c447e601a7b728860e78cabf2191ab206e6480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, there are two failure paths in the wrapper:
- if the tar fails, then the error is ignored because it is on the
left-hand-side of a pipe;
- if the find fails, then the error is ignored because it is a
process substitution (and there is a pipe, too).
While the former could be fixed with "set -o pipefail", the latter can
not be fixed thusly and we must use an intemediate file for it.
So, fix both issues by using intermediate files, both to generate the
list of files to include in the archive, and generate the archive in a
temporary tarball.
Fixes the following build issue, where the find is failing for whatever
unknown reason:
http://autobuild.buildroot.net/results/20f/20fd76d2256eee81837f7e9bbaefbe79d7645ae9/
And this one, where the process substitution failed, also for an unknown
reason:
http://autobuild.buildroot.org/results/018/018971ea9227b386fe25d3c264c7e80b843a9f68/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quote from erlang configure without unixodbc:
checking for odbc in standard locations... no
configure: WARNING: No odbc library found skipping odbc
configure: WARNING: "ODBC library - header check failed"
configure: WARNING: "ODBC library - link check failed"
Quote from erlang configure with unixodbc:
checking for odbc in standard locations... -L/home/buildroot/br3_couchdb/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/lib
checking for SQLAllocHandle in -lodbc... yes
To check for unixodbc support used by erlang use readelf:
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/lib/erlang/lib/odbc-2.11.1/priv/bin/odbcserver | grep NEEDED
0x00000001 (NEEDED) Shared library: [libodbc.so.2]
0x00000001 (NEEDED) Shared library: [libc.so.0]
Tested using this minimal defconfig:
BR2_PACKAGE_ERLANG=y
BR2_PACKAGE_ERLANG_SMP=y
BR2_PACKAGE_UNIXODBC=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finding the packages that select another one in a specific configuration
is not very trivial:
- when optional, the dependency is not expressed in Kconfig
- looking at the .mk files is not very nice.
Introduce a way to dump reverse dependencies of packages, i.e. the list
of packages that directly depend on that package. Like for direct
dependencies, we limit the list to the first-order reverse dependencies.
Document it in the main help; use the opportunity to also document
foo-show-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It now explains limitations of building against Lua < 5.2 interpreters
and how to link to LuaJIT library.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-Boot to 2016.09.01 and kernel to 4.8.4 version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the SD card is connected to the host PC it can be mounted as
/dev/mmcblk0 or /dev/sdX, depending on how the SD controller is connected to
/the PC.
In this case the first partition is /dev/mmcblk0p1, not /dev/mmcblk01.
So use the ${PART1} variable to correctly assign this location.
[Peter: extend commit meesage]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With musl C library, we get following error when building rsyslog:
imfile.c: In function 'in_setupFileWatchStatic':
imfile.c:1614:28: error: 'GLOB_BRACE' undeclared (first use in this function)
GLOB_MARK|GLOB_NOSORT|GLOB_BRACE, NULL, &files);
^
flag GLOB_BRACE is not available on musl. Since package uses it
unconditionally, we mark it not available for musl.
Fixes:
http://autobuild.buildroot.net/results/6d4/6d480bb1e1466809d8ff119f6b35bb91df00785c/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, HAVE_LUA=y was only passed when BR2_PACKAGE_LUA=y. However,
swupdate can also use LuaJIT instead of the classic Lua. Therefore,
this commit updates the package to use BR2_PACKAGE_HAS_LUAINTERPRETER
and the luainterpreter virtual package.
Note that the swupdate configuration needs to be updated separately
(via swupdate-menuconfig) to enable Lua support, and to specify the
Lua version (which should be jit-5.1 to link against LuaJIT).
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
[Thomas: use the luainterpreter virtual package, expand commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current type for 'patches' argument is str. It supposed to only
contain names of files.
If we specify FileType as type, then we don't need to open file ourself
and it allows script to read patch from standard input as well.
e.g.
$ git show -1 | ./support/scripts/get-developers -
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the common board/freescale/common/post-image.sh script instead of
a custom one.
As the final image binary is called "sdcard.img" update the documentation
accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c457213fbc reworked the selection
of PHP interfaces, moving from a choice..endchoice to a three
independent sub-options.
Thanks to how choices are handled by kconfig, an option suitable for
noMMU platforms was automatically chosen by default. When the
choice...endchoice got removed in
c457213fbc, we introduced a "select" for
one of the interfaces, to make sure at least one interface is
selected.
Unfortunately, the selected interface does not build on noMMU
platforms. In order to preserve the previous behavior (CGI interface
is selected by default on MMU capable platforms), this commit makes
the select logic a bit more complicated:
- CGI is selected on MMU-capable platforms if neither CLI or FPM are
selected
- CLI is selected on MMU-less platforms, since this is anyway the
only available interface.
Fixes:
http://autobuild.buildroot.net/results/85ea09188f1e996cb14b4b83a17736c096c569a8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rp-pppoe configure script uses AC_PATH_PROG() to find the path of
a number of tools on the build machine. But in fact, those paths are
not used to call the tools on the build machine, but rather to replace
variables in scripts that are executed in the target.
Due to this, if those tools on the build machine are not located at
the same place as their equivalent in the target, the scripts will
fail to run. To address this, we pass the necessary cache variables to
override the autoconf checks.
The path from pppd has been taken from the build result of the pppd
package. The path for setsid, id and echo have been taken from the
build result of Busybox, assuming that full-blown variants of those
tools would be installed at the same location.
Fixes bug #8811.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
toolchain-wrapper was not reinstalled. So rules toolchain-external-reinstall,
gcc-initial-reinstall, gcc-final-reinstall didn't work as expected.
In add, normalize variable name: s/TOOLCHAIN_BUILD_WRAPPER/TOOLCHAIN_WRAPPER_BUILD/
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just needed to add --with-ldap to POSTGRESQL_CONF_OPTS and add openldap
to POSTGRESQL_DEPENDENCIES when BR2_PACKAGE_OPENLDAP is on
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following suggestion of Yann Morin, rework selection of php
interfaces: use booleans instead of choice to be able to select
multiple interfaces as they are not exclusive. We make sure at least
one of the options is selected.
It should be noted that previously CGI and FPM could not be selected
at the same time. This is now possible. Bug that prevented compilation
of CGI and FPM binaries at the same time has been fixed since PHP 5.4
(https://github.com/php-build/php-build/issues/101).
Legacy handling is added for the two options that are removed, and the
appropriate new options are selected.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages download files (especially patches) with a ? in the
URL. The ? marks the query part of the URL. However, the downloaded
file still contains the ? but from then on it doesn't designate a
query part anymore. Therefore, when fetching from PRIMARY or
BACKUP site over http, the server will report a 404 Not Found.
To fix, we need to replace the ? with %3F. Obviously, this should
be done only when fetching from PRIMARY or BACKUP. For fetching
from the real upstream, the ? really does designate the query part.
Fixes#9371.
Reported-by: Johan Derycke <johanderycke@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: replace 'SECONDARY' by 'BACKUP'.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building this minimal defconfig
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_GCC_VERSION_6_X=y
fails:
In file included from ../../../../libmpx/mpxrt/mpxrt.c:54:0:
../../../../libmpx/mpxrt/mpxrt.c: In function 'read_mpx_status_sig':
../../../../libmpx/mpxrt/mpxrt.h:52:42: error: invalid application of
'sizeof' to incomplete type 'struct _libc_fpstate'
#define XSAVE_OFFSET_IN_FPMEM sizeof (struct _libc_fpstate)
To fix disable libmpx for musl builds, other projects did the same:
3ec2211548http://git.alpinelinux.org/cgit/aports/commit/main/gcc/APKBUILD?id=1830e485126ea9a95d763317fb0c508c1ff297d2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps cryptopp from 5.6.3 to 5.6.5 in order to fix bug
The commit f707b9ef1688d4429ca6239cf2dc236440974681, which Buildroot
was downloading as a patch to fix build with older gcc versions, has
been merged upstream as of 5.6.4, is therefore no longer necessary,
and dropped in this commit.
In addition, Andrey Volkov in the bug report #9321, proposed to add a
number of patches to cryptopp to solve issues when using
tegrarcm. Those patches are the following ones:
- patch 0: moving to autotools as the build system. This is not
strictly a bug fix, and is not necessary.
- patch 1: merged upstream in
"3941be18891a6a87626b7c70f715ca91c61c08c3 Fixed hang on ARM
platforms in Integer::DivideThreeWordsByTwo", which is part of
5.6.5.
- patch 2: merged upstream in
"9fca0c28023a177106cf58a3de6da610f185a6e4 Work around issue on
ARMEL in MultiplyTop and GCC. ARMHF is OK", which is part of 5.6.5.
- patch 3: merged upstream in
"dce2317195a7d9aa77b159fd1beddaf8358f6243 Increase range for GCC
workaround on ARMEL. After speaking with AP from GCC, he states
some issues are still likely present in Master, which is GCC 6.0",
which is part of 5.6.5
- patch 4: merged upstream in
"605744d8260c6ada033805c13ae0b2646acf18d6 Fixed SecBlock append
when "this == t", fixed assert, added validation test (Issue 92)",
which is part of 5.6.5
- patch 5: merged upstream in
"9f335d719ebc27f58251559240de0077ec42c583 Fix the Rijndael timing
attack counter measure", which is part of 5.6.5
- patch 6: merged upstream in
"d8b02cfaafd7350ed0f876cd5da405cff330d537 Fixed m68k detection
(Issue 153)", which is part of 5.6.5
- patch 7: merged upstream in
"c82fd655ed7465db8d21a0e0559c304a7a86d298 Cleared assert in debug
builds (Issue 138)", which is part of 5.6.5
Bottom line: none of the patches proposed by Andrey Volkov are
necessary if we bump to 5.6.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
From the build configuration, Buildroot defines and set some compiler
and linker flags that should be passed to any packages build-system.
For package using the cmake-package infrastructure, this is achieved
via the toolchainfile.cmake.
This change simplifies the way the toolchainfile.cmake file handles
these flags: it now just sets them, without any attempt to extend them
with those Buildroot defined.
This change still allows overriding these flags from the configure
command line.
So, now, when a CMake-based package needs to extend them, they should
be fully set from the package *.mk file. This behavior is consistent
with what is done for others package infrastructures.
This change should not pull any regression WRT the bug #7280 [1].
However, now, when someone uses the toolchainfile.cmake file outside of
Buildroot, he/she must overload all compiler/linker flags (including the
ones Buildroot sets since they no longer get automatically added).
[1] https://bugs.busybox.net/show_bug.cgi?id=7280
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a build type is set, CMake does append some flags that can override
those set by Buildroot due to the gcc option parser (in which the last
argument controling an option wins).
Hereafter is a summary of the optimization and debug flags set by
Buildroot and appended by CMake.
* Flags set by Buildroot depending on the configuration:
BR2_ENABLE_DEBUG | Optim. level | Buildroot {C,CXX}FLAGS
=================+=====================+=======================
y | BR2_OPTIMIZE_S | -Os -gx
y | BR2_OPTIMIZE_G | -Og -gx
y | BR2_OPTIMIZE_{0..3} | -On -gx
n | BR2_OPTIMIZE_S | -Os
n | BR2_OPTIMIZE_G | -Og
n | BR2_OPTIMIZE_{0..3} | -On
* Default flags appended by CMake depending on the build type:
Build type | Flags | Effects on {C,CXX}FLAGS
===============+=================+===========================================
Debug | -g | Force -g, compatible with BR2_ENABLE_DEBUG
MinSizeRel | -Os -DNDEBUG | Set -Os, compatible with BR2_OPTIMIZE_S
Release | -O3 -DNDEBUG | Set -O3, closest to the others cases,
| | though the optimization level is forced.
RelWithDebInfo | -O2 -g -DNDEBUG | Force -g and set -O2, not friendly with BR
To avoid the CMake flags take precedence over the Buildroot ones, this
change sets in toolchainfile.cmake the per-config compiler flags CMake
can append depending on the build type Buildroot defined.
So, CMake does not mess up with the compilation flags Buildroot sets.
It is still possible to override these per-config flags on the cmake
command line.
Note:
If a CMake-based project forces the compiler and/or linker flag
definitions (the default ones or the per-config ones - e.g.
CMAKE_C_FLAGS/CMAKE_C_FLAGS_{DEBUG,RELEASE}), there is not much
Buildroot can do about it.
So, the flags will be overwritten anyway in these cases.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- adjust comment in toolchainfile.cmake.in, as suggested by Arnout.
- also handle CMAKE_Fortran_FLAGS_*, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The chosen CMAKE_BUILD_TYPE encodes an option of the Buildroot
configuration, so it makes more sense to save it in the
toolchainfile.cmake than to pass it during configure.
It is still possible to override the build type on the cmake
command line.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: reword description in the CHANGES file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4b01201834.
Before reverting this patch, CMake packages are built with the following
options:
* if BR2_ENABLE_DEBUG is set:
The CMake build type is set to RelWithDebInfo, which means:
- Optimization level is forced to: -O2;
- no log nor assert due to -DNDEBUG;
- BR2_DEBUG_{1..3} effect is unchanged;
* otherwise:
The CMake build type is set to Release, which means:
- Optimization level is forced to: -O3;
- no log nor assert due to -DNDEBUG (as expected).
In any case, the optimization WRT the binary size is always ignored
and forced.
Reverting to the previous situation, so Buildroot now chooses between
the 'Debug' and 'Release' config types, which are semantically closer
to what Buildroot does everywhere else:
* if BR2_ENABLE_DEBUG is set:
The CMake build type is set to Debug, which means:
- only -g option is passed by CMake;
- optimization is not forced, nor debug level, so they are kept
as-is;
* otherwise:
The CMake build type is set to Release, so no change in this case:
- Optimization level is forced to: -O3;
- no log nor assert due to -DNDEBUG (as expected);
- size optimization is ignored.
Follow-up patches will fix the CMake flag variables that are appended by
CMake.
Cc: Charles Hardin <ckhardin@exablox.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to avoid duplicating architecture dependencies in the trinity
Config.in file, this commit introduces a
BR2_PACKAGE_TRINITY_ARCH_SUPPORTS Config.in variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It also changes the python-protobuf.hash file to be a symbolic link to
../protobuf/protobuf.hash so that both hash files don't have to be
updated when protobuf is bumped.
In addition, the 0001-disable-unneeded-build-dependencies.patch patch
from package/python-protobuf/ is removed because it has been merged
upstream.
Signed-off-by: Jan Heylen <heyleke@gmail.com>
[Thomas: fix the build of python-protobuf.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When radius plugin is enabled, we get following error:
/usr/bin/install: cannot stat '/home/rahul.bedarkar/buildroot/output/build/pppd-2.4.7/pppd/plugins/radius/etc/server': No such file or directory
Name of config file is 'servers' instead of 'server'.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 035567b279 solved the build issue
of pppd with Linux 4.8 kernel headers, but in the process broke the
build with older kernel headers such as 3.10.
This commit takes a different approach, by moving the <netinet/in.h>
include above linux header includes.
Linux uapi headers try to avoid redeclaring things from libc via
linux/libc-compat.h. However that only works if the libc header is
included first.
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot configuration for Zynq boards have CONFIG_FIT_SIGNATURE=y,
so they need OpenSSL to be available on the host system. In order to
add OpenSSL to the build this commit adds the
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the relevant defconfigs.
Fixes#9316.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some U-Boot board configurations have CONFIG_FIT_SIGNATURE=y. In this
case, when U-Boot builds its tools, it requires OpenSSL support on the
host system.
Since we clearly don't want to unconditionally depend on host-openssl,
we introduce a new option to explicitly enable the dependency on
host-openssl. This is exactly identical to the existing
BR2_TARGET_UBOOT_NEEDS_DTC, for the dependency on host-dtc. It is
therefore the responsibility of the user to enable this option if his
board configuration uses CONFIG_FIT_SIGNATURE=y.
Necessary to fix bug #9316.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of pppd with toolchain using Linux 4.8
headers. The patch has been taken from a pull request pending on the
Github project, which is unfortunately somewhat dead.
The fix is not the most beautiful one, but it does the job, in a piece
of source code that's anyway rather messy in terms of mixing userspace
headers and kernel headers.
Fixes:
http://autobuild.buildroot.net/results/bdc4f274e527c5aebf9bd1b2ca85ba8e7da57e9d/
and numerous similar other build failures
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For packages that use a version control repository rather than a pre-made
tarball, the directory prefix used inside the tarball is currently
FOO_BASE_NAME, which can be 'foo' or 'host-foo'.
This means that the hash of such tarball will be different for target and
host packages, even though the contents are exactly the same. Hence, if the
hash file is created based on 'foo', and later a fresh build is made where
'host-foo' happens to be built before 'foo' (with a different config, for
example), the hash will be detected as incorrect and a new download is
started.
This problem does not affect many packages/users, due to the number of
conditions to be met:
- the package should be available for target _and_ host
- the package needs to use a VCS download method, e.g. git, hg, svn, ...
This does not include standard github downloads, which download a pre-made
archive.
- there should be a hash file containing the hash of the downloaded archive.
Since normally there is no hash file for packages with sources coming from
a version control system, this restricts even further. Some examples of
packages in this category that do have a hash file (but not necessarily
match the earlier conditions): expedite, vexpress-firmware, squashfs, ...
- the archive needs to be stored in a 'primary site' after initial archiving
and thus be downloaded later using a non-version-controlled method, like
wget or scp. This is because the version control download methods do not
receive a '-H' parameter pointing to the hash file and thus no hashes are
checked at all even if the file is present.
While packages matching the third condition could be considered to be 'wrong'
and need to be fixed, it does actually makes sense to have a hash file for
packages from version control, in particular if they are stored in a
primary site as mentioned in the last condition.
Regardless of any different opinions on the previous paragraph, it is also
not conceptually correct that a tarball of a package source can contain a
Buildroot-specific directory prefix 'host-'. Therefore, use
FOO_RAW_BASE_NAME instead of FOO_BASE_NAME when calling the dl-wrapper.
Example test scenario that exhibits the problem:
$ rm -rf /tmp/dl dl/squashfs-9c1db6d13a51a2e009f0027ef336ce03624eac0d.tar.gz
$ make qemu_x86_64_defconfig
$ make host-squashfs-dirclean host-squashfs-source
$ mkdir /tmp/dl
$ mv dl/squashfs-9c1db6d13a51a2e009f0027ef336ce03624eac0d.tar.gz /tmp/dl/
$ sed -i -e 's,BR2_PRIMARY_SITE=.*,BR2_PRIMARY_SITE="file:///tmp/dl",' \
-e '/BR2_PRIMARY_SITE/aBR2_PRIMARY_SITE_ONLY=y' .config
$ make host-squashfs-dirclean host-squashfs-source
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit fa6feff (wireshark: needs the qt5tools lrelease utility)
introduced a circular dependency chain in Kconfig:
package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
package/qt5/qt5base/Config.in:118: symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
package/qt5/qt5tools/Config.in:19: symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
package/qt5/qt5tools/Config.in:1: symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/Config.in:131: symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
package/qt5/qt5x11extras/Config.in:1: symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
package/qt5/qt5base/Config.in:186: symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI
Fix that by dropping the select on the Qt5Tools, and introduce an
intermediate kconfig-level variable to represent the new condition, to
simplify the .mk file.
That would make the condition for enabling/disabling the GUI to be a
little bit more complex by adding yet another (long-ish) variable.
So we also introduce an intermediate kconfig-level variable that
represent the condition to enable the GUI.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Free Electrons sponsored the Buildroot Developers Meeting at ELCE 2016
in Berlin by making a donation to IN-Berlin, the organization who hosted
the 3-day event.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the Free Electrons logo of the Buildroot website to
the new logo of the company.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While fixing
http://autobuild.buildroot.net/results/d95/d9572bcafc1776eebe88bbcaf031a05cd6ee4b23/
by using http://patchwork.ozlabs.org/patch/674337/ the build stopped at
a later stage with
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_add_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_sub_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_or_1'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_compare_exchange_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_exchange_1'
collect2: error: ld returned 1 exit status
so libatomic must be pulled in if necessary.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Output of get-developers script in our manual uses --cc for developers,
but actual output of get-developers script uses --to. This patch makes
code consistent with documentation, by using --cc for developers.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The commandline paramter to enable/disable postgresql support is
called '--with-pgsql/--without-pgsql' and not '--with-postgresql/
--without-postgresql'.
Fixes [1] in case postgresql development files are installed on the host:
checking for PostgreSQL... testing
checking autodect pgsql headers... yes /usr/include/postgresql
checking autodect pgsql libs... /usr/lib64
checking for PQconnectStart in -lpq... no
configure: error: PostgreSQL support can't build without PostgreSQL libraries
[1] http://autobuild.buildroot.net/results/749/7497730da2affffe0e5b9b790081de10c269f416
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-march=m6201 is not yet supported in GCC upstream, so disabling all
versions when selecting this core.
Note that M6201 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for M6201 as
well.
The external Codescape IMG GNU Linux Toolchain has support for this
core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency use 'libraries' and 'program' as component names and
adjust license string for readability when we conditionally specify
license for server program.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
library libdtc is dual licensed under BSD-2c or GPLv2+ and dtc programs
are licensed under GPLv2+.
This patch annotates licenses with components and uses correct format to
specify dual licensing that is separating licenses with 'or' keyword
instead of '/'.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While BR2_EXTERNAL_<NAME>_PATH was already documented, it was not
made obvious that it could be reused in post-biuld, post-image and
in-fakeroot scripts.
The BR2_EXTERNAL_<NAME>_DESC variable was not documented at all.
Update the manual to fix this.
Note: a2x chokes on this:
.Note:
Both +BR2_EXTERNAL_$(NAME)_PATH+ and +BR2_EXTERNAL_$(NAME)_DESC+ are
available [...]
and spits out a totally useless error message:
a2x: ERROR: "xsltproc" --stringparam toc.section.depth 1 --stringparam
callout.graphics 0 --stringparam navig.graphics 0 --stringparam
admon.textlabel 1 --stringparam admon.graphic 0 --stringparam
chunk.section.depth 0 --output "/home/ymorin/dev/buildroot/O/docs/manual/manual.html"
"/etc/asciidoc/docbook-xsl/xhtml.xsl"
"/home/ymorin/dev/buildroot/O/docs/manual/manual.xml" returned
non-zero exit status 6
So, we had to resort to using different quoting styles for each
variables. They are not semantically equivalent, but the rendering
is the same with the default CSS (which we are using). That's gonna
be good-enough for now...
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we support multiple br2-external trees, BR2_EXTERNAL is no
longer exported in the environment.
This means that post-build scripts in a br2-external tree can no longer
find their own files (well, they could re-invent the path by stripping
their known-relative path, but that'd be ugly, especially since we can
very well provide it).
Export the path for each br2-external trees as environment variables.
Do so for the description as well, as a courtesy.
Also, re-order variable definitions to be more logical: first, purely
internal variables, then exported variables.
Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When $(CURDIR) and/or $(O) contain symlinks in their paths, they can be
resolved differently, depending on each package build-system (whether it
uses the given paths or get the absolute canonical ones).
Using absolute canonical paths will help achieving reproducible builds and
will make easier tracking down host machine paths leaking into the host,
target or staging trees.
So, this change ensures the build takes place with the CURDIR and O
variables are set to their absolute canonical paths.
In order to recall the toplevel makefile with absolute canonical paths
for $(CURDIR) and $(O), we need to:
1- Compute the absolute canonical paths for $(CURDIR) and $(O) that will
be passed to the sub-make. This is achieved using the 'realpath' make
primitive. However, some care must be taken when manipulating O:
- the out-of-tree makefile wrapper happens a trailing "/.", we need
to strip this part away to not break the comparison driving the
sub-make call;
- the user can leave a trailing '/' to $(O);
- according to [1,2], realpath returns an empty string in case of
non-existing entry. So, to avoid passing an empty O= variable to
sub-make, it is necessary to define the output directory and create
it prior to call realpath on it (because on the first invocation,
$(O) usually does not yet exists), hence the trick doing the mkdir
right before calling realpath.
2- Update EXTRAMAKEARGS with the absolute canonical $(O) and use it
when call recalling the top-level makefile with umask and paths
correctly set.
3- Lastly, update the condition for setting the CONFIG_DIR and
NEED_WRAPPER variables.
Note:
* This change takes care of the makefile wrapper installed in $(O) to
avoid unneeded make recursion.
[1] https://www.gnu.org/software/make/manual/html_node/File-Name-Functions.html
[2] http://man7.org/linux/man-pages/man3/realpath.3.html
Reported-by: Matthew Weber <matt@thewebers.ws>
Cc: Matthew Weber <matt@thewebers.ws>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change only moves things around and comments what is done in the
top-level Makefile file, in order to prepare the next changes.
Note that moving the definition of $(O) before or after re-entering make
does not change anything on the buildroot behavior.
This change also renames the variable UMASK to REQ_UMASK.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change uncorrolates the CONFIG_DIR and NEED_WRAPPER definition from
the presence of the O variable in the command line.
Now, the condition used to set these variables is the value of O itself.
This change is a preparatory work since the O definition will need to
be moved around when we will make Buildroot run with absolute canonical
paths for both its root directory and the output location.
This will be addressed in a follow-up patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes an issue introduced in commit
ac16793eaa. This commit creates a link
$(@D)/bin/python pointing to the host Python 2, and adds $(@D)/bin/ to
the PATH. However, the QT5WEBKIT_INSTALL_TARGET_CMDS variable copies the
contents of $(@D)/bin/ to the target filesystem, in order to install
binaries produced by the qt5webkit build. By doing this, we overwrite
the 'python' symbolic link on the target.
In order to fix this, we simply create the 'python' symbolic link used
to trick qt5webkit to use python2 on the host in the $(@D)/host-bin/
sub-directory.
Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing following build failures with musl:
* error: unknown type name __uint32_t and __uint64_t
* error: unknown type name pid_t and uid_t
* error: fatal error: bits/sockaddr.h: No such file or directory
it fails with
fds/files.c: In function 'file_tree_callback':
fds/files.c:172:10: error: 'FTW_CONTINUE' undeclared (first use in this function)
return FTW_CONTINUE;
^
fds/files.c:172:10: note: each undeclared identifier is reported only once for each function it appears in
fds/files.c:178:10: error: 'FTW_SKIP_SUBTREE' undeclared (first use in this function)
return FTW_SKIP_SUBTREE;
^
fds/files.c:185:10: error: 'FTW_STOP' undeclared (first use in this function)
return FTW_STOP;
^
fds/files.c: In function 'open_fds_from_path':
fds/files.c:197:26: error: 'FTW_ACTIONRETVAL' undeclared (first use in this function)
int flags = FTW_DEPTH | FTW_ACTIONRETVAL | FTW_MOUNT;
As per ftw man-page, flag FTW_ACTIONRETVAL is specific to glibc. It is
not available on musl. Since package uses it unconditionally, we mark
it not available on musl.
Fixes:
http://autobuild.buildroot.net/results/cb4/cb4a665746652679487dee2c2e4bca881be3724b/
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select ext4 as root file system as the genimage config expects ext4 not ext2.
Tested on beaglebone, beagleboneblack and AM335x EVM
[Peter: reworded slightly]
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fwup configure.ac uses PKG_CHECK_MODULES(), and we're
autoreconfiguring this package, so we should depend on host-pkgconf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When even a single extra util-linux utility is enabled, the default
build and install will install many more programs, including many that
overlap with those offered by busybox.
Fix by reworking the install-utilies menu to take advantage of the new
--disable-all-programs config option. This option make it possible to
disable the basic set of apps, and then enable only the desired apps.
Original patch by Danomi Manchego, visible at
http://patchwork.ozlabs.org/patch/494866/
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas/Arnout: remove the choice between all/custom/no, and simply have
a list of options with the basic set of tools, and then one option for
each tool. This gives the same flexibility, but avoids the choice, which
is never nice to have.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add option to control installation of libfdisk
- Add libfdisk license to the comment in util-linux.mk
- List all utilities provided by the basic set and document that
linux32, linux64, uname26, i386 and x86_64 are symlinks to setarch
- Add options to install cal, ipcrm, ipcs, logger, lslogin and pg
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add missing dependency of the new lslogins option on
libsmartcols, and therefore !MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix several problems in the package recipe:
- Make 'bool "lib<foo>"' the first item in each block
- Move the depends before the selects
- Add missing dependencies on BR2_USE_MMU, for fork()
- Improve help for cramfs utilities and login utilities
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- remove capitalization of prompts, for consistency
- add missing dependencies on libsmartcols, and therefore !MMU]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gzip's configure uses $SHELL to find a POSIX-compliant shell to put in
the shebang of its shell scripts (zcat, gzexe, ...). However, we set
$SHELL to /bin/bash in the Makefile, which may not be present on the
target. We do make sure that /bin/sh always points to a valid shell on
the target so we can use that.
The configure discovery is completely broken for cross-compilation. The
same $SHELL is used during the build (it is used by make to run the
commands in rules) and on the target. Also, the checks for a valid
shell use the host shell, not the target shell.
We could try to patch gzip to fix that, but the checks can anyway not
be run for the target shell, so we'll have to override it with a cache
value anyway. So we can just as well do exactly that, without patching.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with Qemu 2.6.1 and qemu_aarch64_virt_defconfig and with
HOSTARCH set to x86 in the Buildroot main Makefile.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This Linaro release provide a new toolchain archive for i686 hosts, so update our
old 2014.09.
Tested with Qemu qemu-2.4.1-11.fc23 and with HOSTARCH set to x86 in the Buildroot
main Makefile.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also...
- Switch to GitHub.
- Remove LD=CC logic in libscsi.mk. This is now handled by the configure
script.
- Add patch to fix unsafe include paths issues. This patch has been sent
upstream as a pull request.
- Use a hook to create the m4 directory so autoreconf doesn't fail.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Docuement the new, optional desc: field for an external.desc file.
That part of the manual was starting to be a bit of a mess, so
reorganise it. Provide a complete br2-external tree example.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, it is not possible for a br2-external tree to override a
defconfig bundled in Buildroot, nor is it possible to override one from
a previous br2-external tree in the stack.
However, it is interesting that a latter br2-external tree be able to
override a defconfig:
- the ones bundled in Buildroot are minimalist, and almost always
build a toolchain, so a br2-external tree may want to provide a
"better" defconfig (better, in the sense "suited for the project");
- similarly for a defconfig from a previous br2-external tree.
But we can't do that, as the rules for the defconfigs are generated in
the order the br2-external trees are specified, all after the bundled
defconfigs. Those rule are patten-matching rules, which means that the
first one to match is used, and the following ones are ignored.
Add a new utility macro, 'reverse', inspired from GMSL, that does what
it says: reverse a list of words.
Use that macro to reverse the list of br2-external trees, so that the
latters win over the formers, and even over bundled ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only support at most one br2-external tree. Being able
to use more than one br2-external tree can be very useful.
A use-case would be for having a br2-external to contain the basic
packages, basic board defconfigs and board files, provided by one team
responsible for the "board-bringup", while other teams consume that
br2-external as a base, and complements it each with their own set of
packages, defconfigs and extra board files.
Another use-case would be for third-parties to provide their own
Buildroot packaging in a br2-external tree, along-side the archives for
their stuff.
Finally, another use-case is to be able to add FLOSS packages in a
br2-external tree, and proprietary packages in another. This allows
to not touch the Buildroot tree at all, and still be able to get in
compliance by providing only that br2-external tree(s) that contains
FLOSS packages, leaving aside the br2-external tree(s) with the
proprietary bits.
What we do is to treat BR2_EXTERNAL as a colon-separated (space-
separated also work, and we use that internally) list of paths, on which
we iterate to construct:
- the list of all br2-external names, BR2_EXTERNAL_NAMES,
- the per-br2-external tree BR2_EXTERNAL_$(NAME) variables, which
point each to the actual location of the corresponding tree,
- the list of paths to all the external.mk files, BR2_EXTERNAL_MKS,
- the space-separated list of absolute paths to the external trees,
BR2_EXTERNAL_DIRS.
Once we have all those variables, we replace references to BR2_EXTERNAL
with either one of those.
This cascades into how we display the list of defconfigs, so that it is
easy to see what br2-external tree provides what defconfigs. As
suggested by Arnout, tweak the comment from "User-provided configs" to
"External configs", on the assumption that some br2-external trees could
be provided by vendors, so not necessarily user-provided. Ditto the menu
in Kconfig, changed from "User-provided options" to "External options".
Now, when more than one br2-external tree is used, each gets its own
sub-menu in the "User-provided options" menu. The sub-menu is labelled
with that br2-external tree's name and the sub-menu's first item is a
comment with the path to that br2-external tree.
If there's only one br2-external tree, then there is no sub-menu; there
is a single comment that contains the name and path to the br2-external
tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the manual with the new external.desc mandatory file.
Take the opportunity to add a section listing all mandatory files,
Config.in, external.mk and the new external.desc, instead of just
hinting about them in the external package recipes section.
Change the examples to use the NAME-suffixed variable instead of the
raw BR2_EXTERNAL variable.
Change all references to BR2_EXTERNAL elsewhere in the manual to now
use the 'br2-external tree' terminology.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.
This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.
Also, display the NAME and its path as a comment in the menuconfig.
This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.
The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.
Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).
Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we treat the case where we have no br2-external tree
(BR2_EXTERNAL is empty) differently from the case where we do have one
(BR2_EXTERNAL is not empty).
There is now no reason to treat those two cases differently:
- the kconfig snippet is always generated appropriately (i.e. it would
include the br2-external tree if set, or include nothing otherwise);
- we no longer have a dummy br-external tree either.
Also, the Makefile code to handle BR2_EXTERNAL is currently quite
readable if at least a little bit tricky.
However, when we're going to add support for using multiple br2-external
trees simultaneously, this code would need to get much, much more complex.
To keep the Makefile (rather) simple, offload all of the handling of
BR2_EXTERNAL to the recently added br2-external helper script.
However, because of Makefiles idiosyncracies, we can't use a rule to
generate that Makefile fragment.
Instead, we use $(shell ...) to call the helper script, and include the
fragment twice: once before the $(shell ...) so we can grab a previously
defined BR2_EXTERNAL value, a second time to use the one passed on the
command line, if any.
Furthermore, we can't error out (e.g. on non-existent br2-external tree)
directly from the fragment or we'd get that error on subsequent calls,
with no chance to override it even from command line.
Instead, we use a variable in which we store the error, set it to empty
before the second inclusion, so that only the one newly generated, if
any, is taken into account.
Since we know the script will always be called from Makefile context
first, we know validation will occur in Makefile context first. So we
can assume that, if there is an error, it will be detected in Makefile
context. Consequently, if the script is called to generate the kconfig
fragment, validation has already occured, and there should be no error.
So we change the error function to generate Makefile code, so that
errors are caught as explained above.
Lastly, when the value of BR2_EXTERNAL changes, we want to 'forget'
about the previous value of the BR2_EXTERNAL_MK variable, especially in
the case where BR2_EXTERNAL is now set to empty, so that we do not try
to include it later. That's why we first generate empty version of
BR2_EXTERNAL_MK, and then assign it the new value, if any.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we generate a kconfig snippet, we can conditionally include the
BR2_EXTERNAL's Config.in only when BR2_EXTERNAL is supplied by the user,
which means our empty/dummy Config.in is no needed.
As for external.mk, we can also include it only when BR2_EXTERNAL is
supplied by the user, which means our empty/dummy external.mk is no
longer needed.
Ditch both of those files, and:
- only generate actual content in the Kconfig snippet when we actually
do have a BR2_EXTERNAL provided by the user (i.e. BR2_EXTERNAL is not
empty);
- add a variable that contains the path to the external.mk provided by
the user, or empty if none, and include the path set in that variable
(make can 'include' nothing without any problem! ;-) )
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.
This will ultimately allow us to use more than one br2-external tree.
Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.
We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump includes
https://go.googlesource.com/go/+/a527bdbda39c48fa772d8d54eb6b849f240442c1
which fixes a gcc6-related compile error
cmd/6c
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c: In function 'gmove':
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c:995:28: error: left shift of negative value [-Werror=shift-negative-value]
f->vconst |= (vlong)~0 << 32;
^~
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c:1045:28: error: left shift of negative value [-Werror=shift-negative-value]
f->vconst |= (vlong)~0 << 32;
^~
cc1: all warnings being treated as errors
not yet caught by autobuilders using this defconfig:
http://autobuild.buildroot.net/results/394/394e22be0ef986463e97b3040dad8f978262732c/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The blind option BR2_GCC_SUPPORTS_GRAPHITE was used to distinguish gcc
versions that support the graphite loop optimizer. But since a while
already, all the versions we support do support graphite. So this symbol
isn't needed anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARC version of gcc does support graphite. It was probably just
forgotten when the BR2_GCC_VERSION_ARC symbol was introduced.
While we're at it, also remove a redundant newline.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: ARC Maintainers <arc-buildroot@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The blind option BR2_GCC_NEEDS_MPC was used to distinguish gcc versions
that rely on the mpc library and the ones that don't. But since a while
already, all the versions we support do need the mpc library. So this
symbol isn't needed anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ExtUtils::MakeMaker is one of the Perl Core modules usually packaged in
Perl package for a Debian/Ubuntu based system.
For a Fedora based system, each Perl Core modules have their own RPM
package. So install only Perl package is not enough.
Fixes:
>>> host-libxml-parser-perl 2.41 Configuring
[...]
perl `which perl` Makefile.PL
Can't locate ExtUtils/MakeMaker.pm in @INC (you may need to install the ExtUtils::MakeMaker module)
Add a new Perl module check in dependency.sh.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: François Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.
Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.
The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.
It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated option.
[Peter: drop binutils patches]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 doesn't work out of the box because the
u-boot-nand.img support has been removed.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 does build successfully, but we don't have a
board anymore to test it.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official `rapidxml` package release only supports up to GCC 4.6.x
for all capabilities. Implementers attempting to include the file
"rapidxml_print.hpp" will all result in a compilation failure when using
a currently supported Buildroot GCC version (all 4.7+ at this time).
With the provided patch, dependent packages will be able to use all of
rapidxml's capabilities using a generated toolchain from Buildroot (let
alone external toolchains).
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
[Thomas: rework patch so that it contains the proper line endings, and
applies properly without a pre-patch hook to convert the line endings
beforehand.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump kernel revision used by lego_ev3_defconfig to the latest tag from
ev3dev, as suggested by Peter. This is a 4.4 series kernel, which has the
added benefit of not necessitating a specific gcc to boot.
We need a patch to create an empty drivers/lego/Kconfig file for the build
to succeed though, as the ev3dev kernel normally expects a drivers tree to
be checked out there.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit
0924208839 ("configs/arm_juno: use 4.6
mainline kernel"), we're using a mainline kernel for the ARM Juno
board. But we're still fetching it from a Git repository, which is not
really efficient, so let's switch to use a tarball instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi segfaults as soon as it tries to load a python module:
Could not find platform independent libraries <prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
Segmentation fault
Turns out that keeping .py modules (with or without .pyc) fixes the
issue.
Currently, Kodi selects python, but since the format of modules is a
choice, we can not select it.
Fix that by inverting the dependency on python from Kodi:
- turn it into a depends rather than a select,
- add the dependency to ! pyc-only
- update the comment accordingly.
In addition, the !MMU and !static dependencies are updated since they
are no longer needed for Python (we now depend on it rather than
selecting it), but for other packages. The !MMU dependency is moved to
the _ARCH_SUPPORTS symbol as well.
Also, we can no longer "select BR2_PACKAGE_SAMBA4", because samba4
selects python, and we can no longer select python. Therefore, we switch
to a "depends on" dependency for samba4, which is fine as a user willing
to use Kodi with Samba will certainly realize that Samba should be
enabled.
Fixes bug #9221.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- update on latest master
- take care of the !MMU/!static dependencies.
- take care of the samba4 problem.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This configuration allows out-of-the box Digilent Zybo
support. It uses mainline U-boot and Linux kernel.
This configuration generates a SD card image named sdcard.img.
[Peter: rename genimage.cfg, cleanup post-image script, enable VFP support,
use 4.6 kernel headers and add tools needed by genimage]
Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a target configuration for the beaglebone that supports the SGX530
graphics acceleration and builds the qt5 demos with the eglfs backend.
The imagination technologies demos and fbv are also included. The Linux
kernel is based on the omap2plus defconfig, a config fragment adds the
required settings for SGX accelerator support.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the target config for the beaglebone based on the
AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk.
Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone,
am335x-boneblack will be built and a sd card image is created with a
post-image script. The kernel and driver versions match the
ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm
revisions (1 bit sd card) and JTAG debugging.
Kernel JTAG patch: By default the kernel will disable the JTAG clock,
access via the JTAG port will not work after the kernel booted. The
AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock
alive.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: remove 1-bit MMC patch, it's causing a significant performance
regression for users of BeagleBone, which are 99.99% of the users of
this defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 5.x introduced a regression in the ARM build, which causes the
s-automata program to consume a very significant amount of RAM during
the gcc build. This causes numerous failures with our Travis-CI based
testing of defconfigs.
In order to address this, this commit backports a commit from the gcc
master branch, to both our gcc 5.x and gcc 6.x support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The wpa_supplicant was in fact no introduced by Peter, but by Gustavo,
and Gustavo is much more active in maintaining this package, so let's
mention Gustavo as the developer for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refering to package/gcc/gcc-initial and package/gcc/gcc-final was not a
good idea, as it doesn't notify when gcc patches are
added/removed/modified, so change this to package/gcc so that it catches
all changes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from atfirmware to arm-trusted-firmware, in order
to match upstream.
- Remove option to apply custom patches. We no longer add such options,
and use the global patch directory instead.
- Rename the repo URL/version options, in order to not be Git specific,
in case support for fetching from other VCS is added later. This is
consistent with how other bootloaders handle this.
- Add license information.
- Do not add a weird dependency on the vexpress-firmware package in
Config.in. Instead, simply use it if it's available. Of course, some
configurations (such as the juno configuration) will fail to build if
vexpress-image is not enabled, but it's the responsibility of the
user to create a config that builds.
- Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-march=p6600 is not yet supported in GCC upstream, so disabling all
versions when selecting this core.
Note that P6600 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for P6600 as
well.
The external Codescape IMG GNU Linux Toolchain has support for this
core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=i6400 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that I6400 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for I6400 as
well.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=m5101 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that M5101 implies a MIPS R5 CPU, and some GCC versions are already
disabled for R5, so we don't need to disable those ones for M5101 as
well.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=m5100 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that M5100 implies a MIPS R5 CPU, and some GCC versions are already
disabled for R5, so we don't need to disable those ones for M5100 as
well.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=interaptiv support starts from GCC-6, so disable previous
versions when selecting this core.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=mips64r5 support started from GCC-5, so disable previous versions
when the CPU is R5.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=mips32r5 support started from GCC-5, so disable previous versions
when the CPU is R5.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By aggregating all the license files into a single big text-only file
means we have no way to use license files that are binary blobs (e.g.
pdf, rtf...).
Just do not generate that big file; if the user still wants it, it is
very easy to create it afterwards.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the SCP (System Control Processor)
firmware for the ARM reference platforms. There will most likely be
other SCP firmware provided by other vendors, but they might be provided
in a different form, so we for now create a vendor-specific package
named vexpress-firmware.
Since this firmware is used for booting, we create the package in boot/
and not in package/.
The package simply installs a single pre-built binary file into the
images directory.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from scpfirmware to vexpress-firmware.
- Add a Config.in prompt for the package.
- Remove the prompt-less Config.in options to select the Git repo and
version. Since we only support the Vexpress firmware, there's no need
for configurability here, so we just use the right Git repo/version
in the .mk file.
- Use $(INSTALL) -D to install the firmware file.
- Add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash file, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fetch the source archive from fedora repository since this version of
the source is not available on the project site since it moved to
sourceforge.
Also add the md5 checksum computed by feodra to the *.hash file.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- With the release of BIND 9.11.0, ISC is changing the open source
license for BIND from the ISC license to the Mozilla Public License
(MPL 2.0). See release notes:
http://ftp.isc.org/isc/bind9/9.11.0/RELEASE-NOTES-bind-9.11.0.html
- Explicitly enable/disable zlib support, otherwise the configure script
will fail like this:
checking for zlib library... yes
checking for library containing deflate... no
configure: error: found zlib include but not library.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evince needs poppler-glib support (when poppler is enabled, for PDF
reading support), so add explicit handling to the package.
And poppler-glib requires cairo output, hence the conditional on both
libglib2 and cairo to enable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hardcoded parameters are used for mysql user/directory.
Make S97mysqld source a /etc/default/mysql file where these
parameters can be overridden.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Bump to mono 4.6.0.245
* Enabling previously disabled aot cause this version doesn't
compile without
* Fixing removed licensing file in mcs/COPYING.LIB
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useful for testing no-MMU ARM code in Qemu.
The newer Linux kernels with DT support for Qemu Versatile aren't yet
working, so use latest 4.4 kernel.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit ea161cf689.
The host-texinfo dependency is no longer used by any package, after using
another solution to the problem that required its introduction in the first
place.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The binutils/host-binutils package applied several tricks to avoid building
info documentation. In the worst case, host-texinfo is added as dependency.
However, there is a simpler solution that removes the need for all these
tricks: instruct the makefiles to use a dummy makeinfo command ('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 12306a81f8 (gdb: get rid of host-texinfo dependency) tried to
append MAKEINFO=true to the host/target make install arguments, but as the
default values for these are only added when (host-)autotools-package is
evaluated (and only if empty), this effectively drops the default values and
we ended up without the 'install' target and nothing got installed.
To fix this, specify the full install arguments.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
following commit 7de5b0d2d8, bump kernel
headers to 3.14.79 to match the kernel version.
We cannot use BR2_KERNEL_HEADERS_AS_KERNEL as some of their kernel
modifications causes glibc to fail to build.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pkg-config settings in HOST_CONFIGURE_OPTS and HOST_MAKE_ENV have
diverged over time, so they now use different _LIBDIR and
_ALLOW_SYSTEM_{CFLAGS,LIBS} settings.
Conceptually _CONFIGURE_OPTS should be a superset of _MAKE_ENV, so move the
definitions around and define _CONFIGURE_OPTS in terms of _MAKE_ENV instead
of repeating the individual settings.
Do this both for the target and host variant for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not necessary to update all mentioning of uClibc, but
at least we should point to the right homepage of the used
project.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Motion is a program that monitors the video signal from
cameras. It is able to detect if a significant part of
the picture has changed; in other words, it can detect motion.
https://motion-project.github.io
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop m68k-mcf5208 kernel patch since it's upstream.
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.8.1 2.6.0 YES OK (3)
arm_versatile 4.8.1 2.5.0 YES OK
arm_vexpress 4.8.1 2.5.0 YES OK
m68k_mcf5208 4.8.1 2.5.0 YES OK
m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK
microblazebe 4.8.1 2.5.0 YES OK
microblazeel 4.8.1 2.5.0 YES OK
mips32r2el_malta 4.8.1 2.5.0 YES OK
mips32r2_malta 4.8.1 2.5.0 YES OK
mips32r6el_malta 4.8.1 2.6.0 YES OK (3)
mips32r6_malta 4.8.1 2.6.0 YES OK (3)
mips64el_malta 4.8.1 2.5.0 YES OK
mips64_malta 4.8.1 2.5.0 YES OK
mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4)
mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4)
ppc_g3beige 4.8.1 2.5.0 YES OK
ppc_mpc8544ds 4.8.1 2.5.0 YES OK
ppc_virtex_ml507 4.8.1 2.5.0 NO OK
ppc64_pseries 4.8.1 2.5.0 YES OK
sh4 4.8.1 2.5.0 YES OK
sh4eb 4.8.1 2.5.0 NO (1) OK
sparc_ss10 4.8.1 2.5.0 YES OK
sparc64_sun4u 4.8.1 2.5.0 YES OK
sparc_sun4u 4.8.1 2.5.0 YES OK
x86 4.8.1 2.5.0 YES OK
x86_64 4.8.1 2.5.0 YES OK
xtensa_lx60 4.8.1 2.6.0 YES OK
xtensa_lx60_nommu 4.8.1 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-5423 - CASE/WHEN with inlining can cause untrusted pointer
dereference (bsc#993454).
CVE-2016-5424 - Fix client programs' handling of special characters in
database and role names (bsc#993453).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-5180 - ares_create_query single byte out of buffer write
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new wpa_supplicant command line argument -M can be used to describe
matching rules with a wildcard interface name (e.g., "wlan*").
This is very useful for systems without udev.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patches applied upstream. As we are not touching configure.ac or
Makefile.am anymore there is no need for AUTORECONF.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the initial support for mx6q/dl udoo boards.
For information about these boards, please visit:
http://www.udoo.org/
In linux.fragment we disable USB support for now because kernel 4.8
hangs on udoo board.
This is been addressed by Peter Chen's kernel patch series that provides
a standard way to reset a USB hub.
When such series hit mainline, then we can bump the kernel and remove
linux.fragment.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since U-Boot supported SPL for Zynq boards at v2014.04 release, it
became much easier to build a system. At that time, however, users
still needed to manually copy ps7_init.c/h to the U-Boot source tree
to generate a working SPL image because ps7_init.c/h output from
Xilinx tools are not compatible with GPL.
Later, the license problem was solved when Xilinx tools became able
to output the GPL-compatible variants (ps7_init_gpl.c/h) as well.
U-Boot v2015.07 or later includes ps7_init_gpl.c/h for major Zynq
boards so that users can build a boot image straight away.
Now Buildroot supports 3 boards (Zedboard, MicroZed, ZC706) without
any manual intervention. This is a good thing itself, but commit
b9cd72cdbf ("zynq_zc706: bump U-Boot to xilinx-v2016.2") entirely
dropped the information about custom ps7_init files.
This commit provides up-to-date guidance for how to customize the
ps7_init files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas: rewording and formatting tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building sysklogd with glibc 2.24 fails with the following error:
syslogd.c: In function ‘reapchild’:
syslogd.c:2097:13: error: storage size of ‘status’ isn’t known
union wait status;
^
Makefile:99: recipe for target 'syslogd.o' failed
make[2]: *** [syslogd.o] Error 1
make[2]: *** Waiting for unfinished jobs....
package/pkg-generic.mk:201: recipe for target './buildroot/output/build/sysklogd-1.5.1/.stamp_built' failed
make[1]: *** [./buildroot/output/build/sysklogd-1.5.1/.stamp_built] Error 2
Makefile:41: recipe for target '_all' failed
make: *** [_all] Error 2
union wait was marked deprecated in glibc 2.23 and removed in glibc 2.24.
The fix is to declare it as an int.
See https://sourceware.org/ml/libc-alpha/2016-02/msg00342.html
Sent upstream via their mailing list
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 71c5a81c96.
The bump to libglib2 2.25.0 causes a large number of build failures due
to the redefinition of crc32() in both util-linux libblkid and
zlib. This commit is related to the bump, so it needs to get reverted as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/205463c9ea8651911972c2835e28ded1912c811ahttp://autobuild.buildroot.net/results/5e9279ee60c11a3dacacf6d78f87f8d1b92968f5http://autobuild.buildroot.net/results/97043f8defd5a59ae39b4c7f095a10d15c7fe632http://autobuild.buildroot.net/results/e775126d5939093289b1a833dd6323ac293322ed
.. and many more.
libmpdclient, libmicrohttpd and jsoncpp provide a .pc file. Use
pkg-config for detecting the libraries and for providing the necessary
details for compiling and linking.
The current build system of upmpdcli does not use PKG_CHECK_MODULES, but
AC_LINK_IFELSE to detect jsoncpp. After bumping jsoncpp version from
1.7.2 to 1.7.5 the detection fails, because the test program does not
compile anymore:
"""
In file included from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/autolink.h:9:0,
from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/json.h:9,
from test.c:1:
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:155:9:
error: 'int64_t' does not name a type
typedef int64_t Int64;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:156:9:
error: 'uint64_t' does not name a type
typedef uint64_t UInt64;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:158:9:
error: 'Int64' does not name a type
typedef Int64 LargestInt;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:159:9:
error: 'UInt64' does not name a type
typedef UInt64 LargestUInt;
^
In file included from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/json.h:10:0,
from test.c:1:
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/value.h:184:11:
error: 'UInt64' in namespace 'Json' does not name a type
typedef Json::UInt64 UInt64;
[..]
"""
Instead of fixing the test program use PKG_CHECK_MODULES to check for
jsoncpp. While we're on it, add it for libmpdclient and libmicrohttpd,
too.
Upstream-status: https://github.com/medoc92/upmpdcli/pull/52
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-rtslib-fb and
python-configshell-fb should be bumped every time targetcli-fb is bumped
because upstream usually upgrades all of these packages at the same
time.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-rtslib-fb and targetcli-fb
should be bumped every time python-configshell-fb is bumped because
upstream usually upgrades all of these packages at the same time.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-configshell-fb and
targetcli-fb should be bumped every time python-rtslib-fb is bumped
because upstream usually upgrades all of these packages at the same
time.
Another comment warns that switching this package to PyPI would make us
miss new versions of python-rtslib-fb.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit ea161cf689.
The host-texinfo dependency is no longer used by any package, after using
another solution to the problem that required its introduction in the first
place.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The binutils/host-binutils package applied several tricks to avoid building
info documentation. In the worst case, host-texinfo is added as dependency.
However, there is a simpler solution that removes the need for all these
tricks: instruct the makefiles to use a dummy makeinfo command ('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-texinfo dependency in gdb/host-gdb was added because gdb insisted
in building info documentation in recent versions, and we want to avoid
'makeinfo' to be present on the build system.
However, there is another solution that does not require actually building
host-texinfo: instruct the makefiles to use a dummy makeinfo command
('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit e57ea511ee. As noted
by the original author of the package, Christophe Vu-Brugier, this
package should be updated together with python-configshell-fb and
python-targetcli-fb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Atop is an ASCII full-screen performance monitor for Linux.
- install only the basic functionality (command line tool atop).
- add patch to fix musl build by removing unused include of termio.h.
Patch was accepted upstream.
Support for extra functionality can be added by follow-up patches:
- init scripts (sysv and systemd) to autostart logging the system
activity.
- process accounting (needs counterpart enabled in the kernel).
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit fad58cefa4 ("boot/uboot: allow to build multiple U-Boot
images") the installation of SPL binary fails.
For example, when building the mx6cubox_defconfig target we see:
LD u-boot
OBJCOPY u-boot-nodtb.bin
COPY u-boot.bin
MKIMAGE u-boot.img
>>> uboot 2016.09.01 Installing to target
>>> uboot 2016.09.01 Installing to images directory
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.bin /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.img /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/SPL /home/fabio/buildroot/output/images/
cp: cannot stat '/home/fabio/buildroot/output/build/uboot-2016.09.01/SPL': No such file or directory
Instead of calling 'make all' only for the BR2_TARGET_UBOOT_FORMAT_DTB_IMG
case, call 'make all' unconditionally so that the SPL target can also
be installed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bfin workaround is not required if the gcc bfin patch is applied.
(gcc: enable _REENTRANT for bfin when -lpthread is used)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firmware Test Suite (FWTS) is a test suite that performs sanity checks
on firmware. It is intended to identify BIOS and ACPI errors and if
appropriate it will try to explain the errors and give advice to help
workaround or fix firmware bugs.
libfdt (dtc) is an optional dependency as fwts checks for it during
configure, but will only disable a few tests (dt_base, dt_sysinfo) if it
is not available.
This has been build-tested in x86, x86_64 and aarch64 and run-tested in
x86_64 and aarch64 with EFI firmware.
This package has been limited to x86, x86_64 and aarch64 architectures
as it fails to build with linking errors related to ACPI functions when
building for other architectures. As it is less likely that this will be
used for the other architectures, they are disabled for now.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: add missing depends on for the Config.in comment, specify the
LGPL version in the license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
odroidc2's kernel remains based on 3.14. This commit upgrades the kernel
to a new commit that is now based on 3.14.79, and contains a number of
ODroidC2 related bug fixes and feature additions.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also move Openwide/SMILE down to the past sponsors. This also requires
all the row endings to move.
Note that I chose to mention Mind twice, once as current sponsor and
once as past sponsor.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
due to an issue with odroid's u-boot, compiling u-boot with
gcc 5.x will result in a non booting image.
so a gcc 4.9.x compiler must be used.
this solve bug #9326
thanks to Erico Nunes <nunes.erico@gmail.com> for pointing
to the right issue.
Reported-by: <gahabana@mail.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the glibc 2.24-3, and this commit:
https://sourceware.org/git/?p=glibc.git;a=commit;h=80f87443eed17838fe453f1f5406ccf5d3698c25
fakeroot will print spurious message about symbols not being found.
[...]
dlsym(acl_get_fd): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_fd
dlsym(acl_get_file): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_file
dlsym(acl_set_fd): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_set_fd
dlsym(acl_set_file): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_set_file
dlsym(acl_get_fd): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_fd
dlsym(acl_get_file): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_file
[...]
It doesn't seem to impair the behavior of fakeroot, it's simply annoying
for the user.
Debian (which is the creator of fakeroot) has a patch which is a
workaround: simply don't display the message.
Note if you wish to bump fakeroot:
A new version is available but the release tarball doesn't include the
'configure' and 'Makefile' pre-generated.
This means that if we were to bump, the package would need to run its
own 'bootstrap' script which will add dependencies to
host-{automake,autoconf,...} which would be annoying (since almost every
build runs fakeroot).
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
wnpa-sec-2016-56 - The Bluetooth L2CAP dissector could crash.
wnpa-sec-2016-57 - The NCP dissector could crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some Qt5 sub-projects as well as 3rd-party apps written on Qt
are failing to compile with gcc 6.x like that:
---------------------------->8-------------------------
In file included from XXX/output/host/usr/arc-buildroot-linux-uclibc/include/c++/6.2.1/bits/stl_algo.h:59:0,
from XXX/output/host/usr/arc-buildroot-linux-uclibc/include/c++/6.2.1/algorithm:62,
from XXX/output/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/include/qt5/QtCore/qglobal.h:88,
from XXX/output/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/include/qt5/QtCore/qpair.h:37,
from qmediametadata.h:37,
from qmediametadata.cpp:28:
XXX/output/host/usr/arc-buildroot-linux-uclibc/include/c++/6.2.1/cstdlib:75:25: fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
^
compilation terminated.
---------------------------->8-------------------------
That happens because qmake trying to play smart passes some
include paths in Makefile with "-isystem" prefix.
Which in some cases lead to build failure well described in [1].
A little bit more details below on what really happens:
1. In "configure" script Qt determines default include paths of the
toolchain and stores them in DEFAULT_INCDIRS variable, see [2].
2. On qmake execution when it creates Makefile out of .pro-file
it parses headers in INCLUDEPATH variable and if a path matches
one in DEFAULT_INCDIRS then in CXXFLAGS that path is written
with $QMAKE_CFLAGS_ISYSTEM prefix, otherwise non-matching include
path ends up in CXXFLAGS with normal "-I" prefix.
3. By default for gcc "QMAKE_CFLAGS_ISYSTEM = -isystem", see [3].
4. gcc fails to find stdlib.h, again refer to Jörg's explanation in [1].
What we do here we force set QMAKE_CFLAGS_ISYSTEM to "" and so qmake
won't use "-isystem" any longer instead expected "-I" will be used for
all headers, see [4].
That fixes building of Qt5Webkit on ARM with gcc 6.x and a number of
autobuilder failures for ARC (the an arch that uses gcc 6 by default) like:
http://autobuild.buildroot.net/results/56a/56a6700774af692e7f5a99b452b15e4e8592310fhttp://autobuild.buildroot.net/results/697/697412b29bf031bf8f246cc3af97ebcbf6bf6d1b
[1] https://git.buildroot.net/buildroot/commit/?id=e79272fa7ff3d66c18de3514b912cd9d68d121a4
[2] http://code.qt.io/cgit/qt/qtbase.git/tree/configure?h=5.6.1#n3660
[3] http://code.qt.io/cgit/qt/qtbase.git/tree/mkspecs/common/gcc-base.conf?h=5.6.1#n47
[4] http://code.qt.io/cgit/qt/qtbase.git/tree/qmake/generators/unix/unixmake2.cpp?&h=5.6.1#n193
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Major changes since v1.3:
- A64/A80 support
- H3 fel speedup
- Fel readl/writel/sid/reset64 commands
- Fel progress bar support
- Nand-image-builder tool
- Linaro toolchain compatibility workaround
- Portability fixes
The build system has been reworked somewhat and extra compiler flags now
have to be passed in EXTRA_CFLAGS instead of CFLAGS, so we cannot use
{TARGET,HOST}_CONFIGURE_OPTS.
Instead explicitly pass the needed variables (CC and LDFLAGS).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elfutils libraries are GPLv2+ or LGPLv3+, standalone programs are GPLv3+
(see the NEWS file).
Make the GPLv3+ license tag/file dependant on the programs being
enabled, and make the GPLv2+/LGPLv3+ tag more descriptive.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit e1a4b820ff.
As explained by François Perrad:
"""
perl-cross 1.1.0 is not mature (11 issues opened on september), it is
a full refactor, there are already 19 commits after this tag.
I never bump a perl version 5.x.0, I always wait the version 5.x.1
If you really need a perl 5.24.0, cross-compiled it with
perl-5.24.0-cross-1.0.3.
When I bump a perl version, I run on target the full Perl test suite
(~ 800 000 tests), and failures are not expected.
With cross-perl 1.0.3 and 1.1.0 tags, there have failures described in
https://github.com/arsv/perl-cross/issues/33
"""
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltp-testsuite was the only package to mention "non-musl" while all other
packages have it as "glibc or uClibc". This change only adjusts it to
look like all the other packages.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0001-fix-uClibc-build.patch is now part of upstream so it is not
needed in Buildroot anymore. The remaining patches were just rebased and
then renumbered so that they apply cleanly to this new version.
This has been build-tested with both glibc and uClibc toolchains and
run-tested on x86_64 and aarch64.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltp-testsuite installs some of its files directly at its specified
prefix, which by default in Buildroot is /usr for autotools packages.
This is currently leaving scripts and its internal directories directly
installed in /usr, such as in:
# ls /usr
IDcheck.sh lib64 runltplite.sh share
Version libexec runtest testcases
bin runalltests.sh sbin testscripts
lib runltp scenario_groups ver_linux
It also seems to be not feasible to try to install all of its testcases
to standard locations such as /usr/bin as may contain hundreds of
binaries and may not be able to find them all if we change their install
locations. Therefore, it is better if ltp-testsuite installs its tree to
its own self-contained subdirectory.
Upstream instructions recommend that the install path be /opt/ltp,
however it seems that installing things to /opt is not a very common
Buildroot practice.
The proposal then is to install it to /usr/lib/ltp-testsuite and so it
can be run directly from there.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng015.
This tag introduces following changes:
1. binutils: Rebase onto upstream master.
2. gcc: Fix devdf3 emulation for arcem, disable TP register when
building for bare metal.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using the common board/freescale/common/post-image.sh can lead
to some good amount of simplification.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed patches:
* 0001-platform-move-link_get_user_ipv6ll_enabled-to-nm-platform-linux.patch:
no longer relevant (tested on 3.9 for raspberrypi)
* 0002-accept-auto-mode-interfaces.patch: accepted upstream
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar minimum gcc version dependency changed from 4.7 to 4.9 in the
last efivar bump, so this must be reflected in efibootmgr Config.in as
well.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed version numbering scheme since version 13, which
came after version 0.12.
There is now a make install target, so we can drop the manual file
installing. The make install target also installs the new efibootdump
tool.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed version numbering scheme since version 25, which
came after version 0.24.
The two patches that we had in package/efivar/ were backports and so can
be dropped with this bump.
This new version also fixes the build failure with gcc 6.x, so:
Fixes:
http://autobuild.buildroot.net/results/ea6/ea6968d5d0fd0d8ee64e045e2aa56c8e8a0b7b14
[Peter: require GCC 4.9+, adjust Config.in nvme.h comment]
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The MirOS Korn Shell is a quite complete posix shell implementation,
is rather small and supports vi mode properly.
[Peter: use mksh.1 as license file, use TARGET_CONFIGURE_OPTS, install -D]
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After update to uClibc-ng 1.0.18 transmission fails to
compile as the special treatment for sys/quota.h isn't required
anymore, because upstream synced with GNU libc to fix a samba4
compile problem.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
https://nodejs.org/en/blog/release/v6.7.0/
The patches from 6.2.1 have been copied to 6.7.0 with the following
changes:
- Add 0002-inspector-don-t-build-when-ssl-support-is-disabled.patch
to disable the new V8 inspector when openssl is not included.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reported via #buildroot, the newly activated locale
tool should only build for the target, not for the host.
Fix from upstream.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
acpitool requires threads.
However, it does not check for threads in its configure script, so
forgets to link with -pthreads, so fails to build in static-only
scenarii.
However, upstream has been dead for the past 7+ years now, so there is
not much point trying to fix this. Besides, a system with ACPI is most
probably a biggish system, so shared libs will probably be enabled, so
we just require shared libs.
As for bfin, the cryptic configure failure:
configure: error: C++ compiler cannot create executables
is due to the order in which AC_PROG_CXX and AC_PROG_CC are called.
Calling AC_PROG_CC first fixes this error message in this specific case.
However, this is a toolchain issue, as this does not occur for other
toolchains.
Still, inverting the call would anyway then cause linking errors:
/home/ymorin/dev/buildroot/O/host/usr/bin/bfin-linux-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o acpitool main.o acpitool.o ac_adapter.o toshiba.o asus.o thinkpad.o cpu.o battery.o freq.o -lgcc
acpitool.o: In function `Has_ACPI(char*)':
acpitool.cpp:(.text+0x1be): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Get_Kernel_Version(char*, int)':
acpitool.cpp:(.text+0x2aa): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Set_Kernel_Version()':
acpitool.cpp:(.text+0x43e): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Do_Fan_Info(int)':
acpitool.cpp:(.text+0x60a): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Show_WakeUp_Devices(int)':
acpitool.cpp:(.text+0x770): undefined reference to `_Unwind_Resume'
acpitool.o:acpitool.cpp:(.text+0x9ca): more undefined references to `_Unwind_Resume' follow
/home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/../../../../bfin-buildroot-linux-uclibc/bin/ld: acpitool: hidden symbol `___udivsi3' in /home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/libgcc.a(_udivsi3.o) is referenced by DSO
/home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/../../../../bfin-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
Again, because upstream is dead, there's not much point trying to fix
this... And since there's not many chances that a bfin board has ACPI,
we just disable acpitool for bfin.
Fixes various build failures:
http://autobuild.buildroot.org/results/6fc/6fc568228b7c5c5be9e35aae73fb09b431896325/http://autobuild.buildroot.org/results/f1e/f1eb711123c2d8aea8399b8984a007afec4f65fb/http://autobuild.buildroot.org/results/70e/70eb7d7ed93a122b4c7a9890877e721b8d777b00/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to 1.0.18
This includes all patches, so remove them.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an out-of-bounds memory read in the ID3v2 parser for tags that
claim an unrealistically small length. This crashes mpg123 or any
application using libmpg123 with activated ID3v2 parsing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the main python-pyqt5 option is not visible when BR2_PACKAGE_QT
is enabled, the comment should also not be visibled when
BR2_PACKAGE_QT is enabled.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-7052 - Missing CRL sanity check
[Peter: drop CVE 6309 from description as pointed out by Baruch]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package archive includes a proper licence file now, so use it instead of
a source file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support
Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With newer ARC toolchain obsolete -marcXXX were finally deperecated
and so compiler throws errors now about unknown option.
Solution is as simple as switching to more generic -mcu-XXX
options. Which we do. Unfortunately that change in upstream U-Boot [1]
happened right after v2016.09 was released an so we need to have that fix
for v2016.07 which is mentioned in axs10x defconfigs and for the latest
U-Boot release v2016.09 (which is selected by default if no defconfig is
used).
Once we deprecate either U-Boot version in U-Boot corresponding patch
should be removed essentially.
[1] http://git.denx.de/?p=u-boot.git;a=commit;h=7c8d81605302e7d7fdd3e7d8eb69302bddc64a2c
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: handle the U-Boot bump to 2016.09.01.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most importantly this version includes a change to kvm-unit-tests which
means it will stop looking attempting to include host headers. This
change should fix build breakage on i386.
"ERROR: unsafe header/library path used in cross-compilation: '-I'
'/lib/modules/3.13.0-042stab111.12/build/include'"
The new version also includes more powerpc tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To prepare the addition of a Config.in comment for xvisor, and avoid the
repetition of the architecture dependencies, this commits adds a new
BR2_PACKAGE_XVISOR_ARCH_SUPPORTS hidden option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because each tool's individual .mk files is included from the top-level
Makefile and we also include them from linux-tools.mk, they get
registered twice, and thus built twice, and thus installed twice.
We did include them from linux-tools.mk to guarantee they would be
included early and each tool had a chance to register itself before we
were to construct the build and install hooks.
However, the ordering is _currently_ guaranteed, in the C locale by the
files names, which we anyway sort using make's $(sort) function, which
always sorts in the C locale.
Beware if we are to ever rename those files in the future...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
https://www.openssl.org/news/secadv/20160922.txt
Fixes
SSL_peek() hang on empty record (CVE-2016-6305)
SWEET32 Mitigation (CVE-2016-2183)
OOB write in MDC2_Update() (CVE-2016-6303)
Malformed SHA512 ticket DoS (CVE-2016-6302)
OOB write in BN_bn2dec() (CVE-2016-2182)
OOB read in TS_OBJ_print_bio() (CVE-2016-2180)
Pointer arithmetic undefined behaviour (CVE-2016-2177)
Constant time flag not preserved in DSA signing (CVE-2016-2178)
DTLS buffered message DoS (CVE-2016-2179)
DTLS replay protection DoS (CVE-2016-2181)
Certificate message OOB reads (CVE-2016-6306)
Excessive allocation of memory in tls_get_message_header()
(CVE-2016-6307)
Excessive allocation of memory in dtls1_preprocess_fragment()
(CVE-2016-6308)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/2d5/2d55b5d88a06c7b8e6baeb96973009a451e992d9/http://autobuild.buildroot.net/results/899/89922e61c583cf1d11bd0bafdd5586c35d8f6e15/http://autobuild.buildroot.net/results/d5b/d5b8fe66ff8d9ea91e87ef6fbe8274f5e24aa7b0/http://autobuild.buildroot.net/results/89b/89b136e6dced6ca9842a1f23141b0cb999f783da/
.. and many more.
Building OLA with a GCC 6 cross-toolchain fails:
```
/usr/bin/arm-linux-g++ -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./include -I./include
-Wall -Wformat -W -isystem
/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include -pthread
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
-pthread -c -o libs/acn/e131_transmit_test.o
libs/acn/e131_transmit_test.cpp
/usr/bin/arm-linux-g++ -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./include -I./include
-Wall -Wformat -W -isystem
/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include -pthread
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
-pthread -c -o libs/acn/E131TestFramework.o
libs/acn/E131TestFramework.cpp
In file included from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/ext/string_conversions.h:41:0,
from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/bits/basic_string.h:5402,
from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/string:52,
from ./tools/ola_trigger/config.ypp:2:
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/cstdlib:75:25:
fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
^
compilation terminated.
```
The C++ library in GCC 6 now provides its own `<stdlib.h>` header that
wraps the C library header of the same name, so in `<cstdlib>` the
header include
```
#include <stdlib.h>
```
has become
```
#include_next <stdlib.h>
```
`#include_next` is sensitive to the order of directories in the
preprocessor's search path, so if that order is changed with `-isystem`
then the compiler can't find the right header:
```
[1] /usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include
[2] /opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0
[..]
End of search list.
```
`<cstdlib>` is located in [2] whereas `<stdlib.h>` (C library header) is
in [1]. In this case, the `#include_next <stdlib.h>` statement in
`<cstdlib>`, located in [2], is evaluated **after** the search path [1],
so the compiler does not find the right system header.
The problem here is that the OLA build system replaces the `-I` in the CFLAGS
from libprotobuf with `-isystem` to fix some warnings treated as errors
in the libprotobuf header files.
`-isystem` should be used to suppress warnings in system headers only
and the libprotobuf header files are not system files.
The correct fix is to compile with less restrictions and remove
`-Werror` for the build. This is already done by passing
`--disable-fatal-warnings` to OLA.
Fix the reordering of the GCC search paths by removing the replacement of
`-I` with `-isystem`.
Upstream status: https://github.com/OpenLightingProject/ola/pull/1126
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default the build system of OLA passes '-Werror' to GCC. The aborts
compilation with GCC 6:
'''
error: ‘template<class> class std::auto_ptr’ is deprecated
[-Werror=deprecated-declarations]
'''
The target variant already passes the option "-disable-fatal-warnings"
to the build system to disable '-Werror'. Do it for the host variant to
to fix build with host GCC 6.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- configs/acmesystems_aria_g25_128mb_defconfig,
configs/acmesystems_aria_g25_256mb_defconfig :
update default configuration files for both 128MB and 256MB version
- board/acmesystems/aria-g25/genimage.cfg
board/acmesystems/aria-g25/post-image.sh :
add support for genimage in order to build sdcard.img
- board/acmesystems/aria-g25/readme.txt : update documentation
for Aria G25 and add notes about how to build sdcard.img
Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Piotr Nakraszewicz no longer works at Imgtec, and Abhilash Tuse
volunteered to take care of this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kernel source tree also contains the sources for various userland
tools, of which cpupower, perf or selftests.
Currently, we have support for building those tools as part of the
kernel build procedure. This looked the correct thing to do so far,
because, well, they *are* part of the kernel source tree and some
really have to be the same version as the kernel that will run.
However, this is causing quite a non-trivial-to-break circular
dependency in some configurations. For example, this defconfig fails to
build (similar to the one reported by Paul):
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="26f3b72a9c049be10e6af196252283e1f6ab9d1f"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
BR2_PACKAGE_LINUX_TOOLS_CPUPOWER=y
BR2_PACKAGE_CRYPTODEV=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_LIBCURL=y
This causes a circular dependency, as explained by Thomas:
- When libcurl is enabled, systemd depends on it
- When OpenSSL is enabled, obviously, will use it for SSL support
- When cryptodev-linux is enabled, OpenSSL will depend on it to use
crypto accelerators supported in the kernel via cryptodev-linux.
- cryptodev-linux being a kernel module, it depends on linux
- linux by itself (the kernel) does not depend on pciutils, but the
linux tool "cpupower" (managed in linux-tool-cpupower) depends on
pciutils
- pciutils depends on udev when available
- udev is provided by systemd.
And indeed, during the build, we can see that make warns (it's only
reported as a *warning*, not as an actual error):
[...]
make[1]: Circular /home/ymorin/dev/buildroot/O/build/openssl-1.0.2h/.stamp_configured
<- cryptodev-linux dependency dropped.
>>> openssl 1.0.2h Downloading
[...]
So the build fails later on, when openssl is actually built:
eng_cryptodev.c:57:31: fatal error: crypto/cryptodev.h: No such file or directory
compilation terminated.
<builtin>: recipe for target 'eng_cryptodev.o' failed
Furthermore, graph-depends also detects the circular dependency, but
treats it as a hard-error:
Recursion detected for : cryptodev-linux
which is a dependency of: openssl
which is a dependency of: libcurl
which is a dependency of: systemd
which is a dependency of: udev
which is a dependency of: pciutils
which is a dependency of: linux
which is a dependency of: cryptodev-linux
Makefile:738: recipe for target 'graph-depends' failed
Of course, there is no way to break the loop without losing
functionality in either one of the involved packages *and* keep
our infrastructure and packages as-is.
The only solution is to break the loop at the linux-tools level, by
moving them away into their own package, so that the linux package will
no longer have the opportunity to depend on another package via a
dependency of one the tools.
All three linux tools are thus moved away to their own package.
The package infrastructure only knows of three types of packages: those
in package/ , in boot/ , in toolchain/ and the one in linux/ . So we
create that new linux-tools package in package/ so that we don't have to
fiddle with yet another special case in the infra. Still, we want its
configure options to appear in the kernel's sub-menu.
So, we make it a prompt-less package, with only the tools visible as
options of that package, but without the usual dependency on their
master symbol; they only depend on the Linux kernel.
Furthermore, because the kernel is such a huge pile of code, we would
not be very happy to extract it a second time just for the sake of a few
tools. We can't extract only the tools/ sub-directory from the kernel
source either, because some tools have hard-coded path to includes from
the kernel (arch and stuff).
Instead, we just use the linux source tree as our own build tree, and
ensure the linux tree is extracted and patched before linux-tools is
configured and built.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Paul Ashford <paul.ashford@zurria.co.uk>
[Thomas:
- fix typo #(@D) -> $(@D)
- fix the inclusion of the per-tool .mk files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I own a A20 Micro, I contributed the defconfig for it and I test it
still works from time to time.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elementary, libevas-generic-loaders and smtools3 no longer exist.
pygame doesn't exist, it's named python-pygame.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After commit ab930190d7 ("python-psutil: not available on musl")
we are getting following error when we set defconfig
package/python-psutil/Config.in:14: syntax error
package/python-psutil/Config.in:13: invalid option
package/circus/Config.in:21: syntax error
package/circus/Config.in:20: invalid option
Fixes: ab930190d7 ("python-psutil: not available on musl")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/365/365c2f0b32ae3cb1d6d4d8f0145500dfadd05c59/http://autobuild.buildroot.org/results/140/140d0ec9d94f75453c4c82e18803c8d7bffcf6be/
And many more.
The sysinfo structure definition in linux/sysinfo.h (which gets indirectly
included from linux/kernel.h) conflicts with the definition in sys/sysinfo.h
when building against the musl C library, leading to build failures:
arm-linux-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes \
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fPIC -DPSUTIL_VERSION=430 \
-c psutil/_psutil_linux.c -o build/temp.linux-x86_64-3.5/psutil/_psutil_linux.o
In file included from /home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/kernel.h:4:0,
from /home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/ethtool.h:16,
from psutil/_psutil_linux.c:35:
/home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/sysinfo.h:7:8: error: redefinition of 'struct sysinfo'
struct sysinfo {
^
In file included from psutil/_psutil_linux.c:21:0:
/home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
The suggested solution by the musl developers is to duplicate the needed
structures and defines inline instead of including the kernel headers, which
is unlikely to be acceptable upstream - So instead mark python-psutil (and
its reverse dependencies) as unavailable on musl.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
efl and matchbox no longer have a subdirectory containing multiple
packages, so they are no longer good examples of that. Mention qt5 and
gstreamer instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- adjust the license: it's MIT or LGPLv2, add web/license.html to the
license files
- rewrap Config.in help text
- add entry to the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the contribute.txt part of the manual to tell
people to use get-developers to get the appropriate "git send-email"
command when sending patches.
[Peter: use --cc instead of --to as suggested by Yann/Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is an initial list of Buildroot developers. It has been created
semi-automatically by parsing the Git history, and finding the authors
of commits with a title like "<foo>: new package". Some additional
manual tweaking has been done (merging multiple entries corresponding to
the same person, adding some more entries, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script, and its companion library, is more-or-less Buildroot's
equivalent to the kernel get_maintainer.pl script: it allows to get the
list of developers to whom a set of patches should be sent to.
To do so, it first relies on a text file, named DEVELOPERS, at the root
of the Buildroot source tree (added in a followup commit) to list the
developers and the files they are interested in. The DEVELOPERS file's
format is simple:
N: Firstname Lastname <email>
F: path/to/file
F: path/to/another/file
This allows to associate developers with the files they are looking
after, be they related to a package, a defconfig, a filesystem image, a
package infrastructure, the documentation, or anything else.
When a directory is given, the tool assumes that the developer handles
all files and subdirectories in this directory. For example
"package/qt5/" can be used for the developers looking after all the Qt5
packages.
Conventional shell patterns can be used, so "package/python-*" can be
used for the developers who want to look after all packages matching
"python-*".
A few files are recognized specially:
- .mk files are parsed, and if they contain $(eval
$(<something>-package)), the developer is assumed to be looking after
the corresponding package. This way, autobuilder failures for this
package can be reported directly to this developer.
- arch/Config.in.<arch> files are recognized as "the developer is
looking after the <arch> architecture". In this case, get-developer
parses the arch/Config.in.<arch> to get the list of possible BR2_ARCH
values. This way, autobuilder failures for this package can be
reported directly to this developer.
- pkg/pkg-<infra>.mk are recognized as "the developer is looking after
the <infra> package infrastructure. In this case, any patch that adds
or touches a .mk file that uses this infrastructure will be sent to
this developer.
Examples of usage:
$ ./support/scripts/get-developers 0001-ffmpeg-fix-bfin-build.patch
git send-email--to buildroot@buildroot.org --to "Luca Ceresoli <luca@lucaceresoli.net>" --to "Bernd Kuhls <bernd.kuhls@t-online.de>"
$ ./support/scripts/get-developers -p imx-lib
Arnout Vandecappelle <arnout@mind.be>
Gary Bisson <gary.bisson@boundarydevices.com>
$ ./support/scripts/get-developers -a bfin
Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 4.9.4 was the last release of the 4.9.x branch, and the gcc
developes will now only be maintaining gcc 5.x and 6.x:
https://gcc.gnu.org/ml/gcc-announce/2016/msg00002.html
Therefore, it is time to use gcc 5.x as the default version in
Buildroot. We have been having toolchains in the autobuilders with gcc
5.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a necessary dependency to build the new host-libglib2.
libblkd is an indirect dependency for libmount.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARC gcc version is now based on gcc 6.x and no longer gcc 4.8.x,
which makes the option BR2_GCC_VERSION_4_8_ARC a bit irrelevant, as is
the prompt of this option.
This commit therefore renames this option to BR2_GCC_VERSION_ARC, and
adjust its prompt as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new version brings in support for egl-wayland, the EGL extensions
aimed at making it possible to implement Wayland servers and clients. As
such, nvidia-driver becomes the second EGL implementation in Buildroot
that can act as a libegl provider with egl-wayland extensions.
In this version, it becomes possible to use our kernel-module infra,
with just a little few minor tricks: we need just specify the Linux
source and build trees (they are the same for us) and the list of
modules to build. We still need a little patch against the Kbuild files.
We also get rid of the LIBS_NO_VERSION trick and always use complete
filenames, as more libs are now packaged with different version in their
filenames, and even some with no version at all.
When installing libs, we switch from a shell loop to a make foreach
loop, which is easier to handle. It has the side-effect (and advantage)
of displaying the install commands for each library, rather than a
single biggish one, so it is easier to see what goes wrong. This also
means that an error in each phase of the install (the copy of the files
then each symlink) can be caught more easily (it was not previously):
each sequence is now its own make command; we need not use "|| exit 1"
after each command, even in a if block, because the if blocks returns
with the exit code of the last command in it; e.g. if an ln fails, the
if-block in which it is enclosed will return the exit code of ln, and
make will catch it.
Similarly for the X driver modules and each of the programs installed:
we now can catch any failure in the isntall of those.
All of this somewhat simplifies the .mk. It is a little bit longer, but
the structure is saner and more explicit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is a follow-up for
999d4a2631
libGL.so and support files are not only available with DRI drivers but
also with Gallium drivers, in fact mesa3d can be built without any
driver enabled - unless X.org is disabled it will provide libGL.so.
Tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_XORG7=y
Fixes
http://autobuild.buildroot.net/results/d97/d97a80e6de066a7dea08b284eab24fc44b11d661/
kodi-visualisation-waveforhue detects OpenGL installed by mesa3d but the
kodi package itself does not select libglew before because mesa3d was
not listed as a provider for libgl in the buildroot build system.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Christian Stewart <christian@paral.in>
[Atul:
- Updated the default to empty.
- Updated the license to GPLv2.
- Used patches instead of SED commands.
- CC and LD are replaced by TARGET_CC and TARGET_LD.]
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
[yann.morin.1998@free.fr:
- drop the headers_install command
- instead, instruct the kernel to install them
- add patches 0002..0004
- properly build the host tools
- don't depend on the aufs extension, for kernel already patched
- fix comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas:
- Remove the patch 0004-no-override-readdir64.patch, since it no longer
applies to the latest version of aufs-util. Instead, add a post-patch
hook that tweaks the Makefile to remove the problematic rdu64.o from
the build process.
- Use directly the kernel headers from the kernel source tree, rather
than having to install them. This only requires a minor trick to
define "__user" to empty.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Christian Stewart <christian@paral.in>
[Atul:
- Removed the duplicate conditional block.
- Updated the license to GPLv2.
- Removed the visibilty of package from menuconfig.
- Removed dependencies.
- Removed the comment.
- Changed the name of variable from BR2_PACKAGE_AUFS_STANDALONE_VERSION
to BR2_LINUX_KERNEL_EXT_AUFS_VERSION.
- Removed the AUFS_INSTALL_STAGING and AUFS_INSTALL_TARGET variables.
- Removed the BR2_PACKAGE_AUFS_3X and BR2_PACKAGE_AUFS_4X variables.]
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
[yann.morin.1998@free.fr:
- do not fail on version check if aufs ext is disabled
- check for empty version
- squash aufs package and linux extension in one patch
- fail if the kernel already has aufs support
- simplify handling of version]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas:
- Fix the apply patch logic, it was using a non-existent
AUFS_VERSION_MAJOR variable. BR2_PACKAGE_AUFS_SERIES is used
instead.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warp7 has a BRCM43430 Wifi chipset. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable has been unused for a long time, so we can get rid of its
definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We used to do a special handling of Linux kernel modules when stripping
target binaries because there's some special precious data in modules
that we must keep for them to properly operate. This is for example true
for stack unwinding data etc.
It turned out there're cases when our existing "strip --strip-unneeded"
doesn't work well. For example this removes .debug_frame section used by
Linux on ARC for stack unwinding, refer to [1] and [2] for more details.
Now Linux kernel may strip modules as a part of "modules_install" target
if INSTALL_MOD_STRIP=1 is passed in command line. And so we'll do
allowing kernel decide how to strip modules in the best way.
Still note as of today Linux kernel strips modules uniformly for all
arches with "strip" command, so this commit alone doesn't solve
mentioned problem but it opens a possibility to add later a patch to the
kernel which will strip modules for ARC differently - and that's our
plan for mainline kernel.
[1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/86
[2] http://lists.busybox.net/pipermail/buildroot/2016-September/172161.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sam-ba binary is distributed under a proprietary license. TCL and some
applets code is under a BSD-2c like license, while some other applets are
under BSD-4c.
Also correct license files.
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When linking statically with -lreadline we also need to specify
-lcurses. We were already passing LIBS=-intl to fix gettext related
issues, so we refactor how LIBS is passed so that several values can be
passed.
It is worth mentioning that:
1. Passing LIBS= at configure time is not sufficient, because the
configure script does LIBS="" at its end. So in order for the LIBS
value to also be effective during the build, it needs to be passed
in MAKE_OPTS as well.
2. LIBS=-lintl was only passed at build time (it was not needed for any
of the configure tests). However, LIBS=-lncurses is needed both at
configure time (for configure tests) and at build time. Therefore,
the new variable UTIL_LINUX_LIBS gets passed as the LIBS value at
both configure time and build time.
Fixes:
http://autobuild.buildroot.net/results/70e0a273e699c73c6b2ab2a19c8f7ebb1ddee6cdehttp://autobuild.buildroot.net/results/6a7faf8adbffd9437c0117b9f0e89684c24dad23
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The unit tests are tiny guest operating systems that generally execute
only tens of lines of C and assembler test code in order to obtain its
PASS/FAIL result. Unit tests provide KVM and virt hardware functional
testing by targeting the features through minimal implementations of
their use per the hardware specification. The simplicity of unit tests
make them easy to verify they are correct, easy to maintain, and easy
to use in timing measurements. Unit tests are also often used for
quick and dirty bug reproducers. The reproducers may then be kept as
regression tests. It's strongly encouraged that patches implementing
new KVM features are submitted with accompanying unit tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas:
- order architecture dependencies in Config.in alphabetically.
- rewrap Config.in help text, lines were too long
- add an empty line between the package description and the upstream
project URL in the Config.in help text
- don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not
correct for i386 for example. Instead, just handle the few
architectures that the package supports.
- remove useless double quotes in variable definitions.
- remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing
everything in /share/ and not /usr/share/, and setting the prefix to
TARGET_DIR at configure time is not good. Instead, pass DESTDIR at
installation time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig
- add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg
- enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request
- add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the execution of its configure script, Python 3 tries to find an
available "hg" installation, and if available, will try to use it to get
information from the version control system. To do this, it tries to
communicate over the network, potentially over ports that are blocked,
causing the build to halt. This was reported by a user as part of bug
7802.
To solve this, we simply make the Python script use /bin/false as the
"hg" program.
Fixes bug #7802 for the python3 package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the execution of its configure script, Python tries to find an
available "hg" and "svn" installation, and if available, will try to use
them to get information from the version control system. To do this, it
tries to communicate over the network, potentially over ports that are
blocked, causing the build to halt. This was reported by a user as part
of bug #7802.
To solve this, we simply make the Python script use /bin/false as the
"hg" and "svn" programs.
Fixes bug #7802 for the python package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is responsible from downloading and deploying bitstream for
TS-4900's FPGA. It implements clocks, UART MUX, and GPIOs. One of these
GPIOs is used to enable the wifi module.
It is loaded by U-Boot during the boot sequence, the default U-boot
script expects to find it in the /boot folder.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
[Thomas:
- Use "config" instead of "menuconfig" since there's a single option
and no sub-options.
- Add BR2_arm dependency, since it's only used on a specific i.MX6
platform.
- Implement TS4900_FPGA_EXTRACT_CMDS that copy the file to the package
build directory $(@D)
- Change the install command to copy from $(@D) instead of from
$(DL_DIR)
- Change the install command to remove the 'mkdir -p
$(TARGET_DIR)/boot' and instead just use the -D option of the install
program that creates the destination directory if it doesn't exist.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, like libbsd, use -isystem flags to provide so-called
overrides to the system include files. In this particular case, this
is used in a .pc file, then used by antoher package; pkgconf does not
mangle this path; and eventually that other package ends up using
/usr/include/bsd to search for headers.
Our current toolchain wrapper is limited to looking for -I and -L, so
the paranoid check does not kick in.
Furthermore, as noticed by Arnout, there might be a bunch of other
so-unsafe options: -isysroot, -imultilib, -iquote, -idirafter, -iprefix,
-iwithprefix, -iwithprefixbefore; even -B and --sysroot are unsafe.
Extend the paranoid check to be able to check any arbitrary number of
potentially unsafe options:
- add a list of options to check for, each with their length,
- iterate over this list until we find a matching unsafe option.
Compared to previously, the list of options include -I and -L (which we
already had) extended with -idirafter, -iquote and -isystem, but leaving
all the others noticed by Arnout away, until we have a reason for
handling them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current, we only display the path that causes the paranoid failure. This
is sufficient, as we can fail only for -I and -L options, and it is thus
easy to infer from the path, which option is the culprit.
However, we're soon to add a new test for the -isystem option, and then
when a failure occurs, we would not know whether it was because of -I or
-isystem. Being able to differentiate both can be hugely useful to
track down the root cause for the unsafe path.
Add two new arguments to the check_unsafe_path() function: one with the
current-or-previous argument, one to specify whether it has the path in
it or not. Print that in the error message, instead of just the path.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Toolchains using glibc-2.18 or older do not define O_TMPFILE, which
causes build failures on some archs.
systemd has a definition for O_TMPFILE if it is missing, but only
defines it for i386 or x86_64. Furthermore, the header defining it is
not included everywhere O_TMPFILE is used.
Fix that with three patches backported from upstream:
- include the needed header where it is needed (he!),
- define O_TMPFILE for all archs, according to linux-4.8rc3,
- no longer guard against undefined O_TMPFILE in fileio.
Upstream merge commit:
4a13100c6a
Fixes:
http://autobuild.buildroot.net/results/b0067e72ffcbbe1db9ef49ab297cece951345aeb/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it is desired to build multiple U-boot images. E.g. one to
save into flash memory and one for serial load. So far this was not
possible.
This change allows to select any combination of the target formats. They
are all copied to the image folder.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
[Thomas:
- Handle the BR2_TARGET_UBOOT_FORMAT_BIN, which wasn't handled, and
therefore u-boot.bin was not copied when
BR2_TARGET_UBOOT_FORMAT_BIN=y.
- Rename UBOOT_BIN to UBOOT_BINS, since it can now contain multiple
values.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- add --disable-elput in the !BR2_PACKAGE_EFL_ELPUT case
- add missing dependency on libxkbcomm]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to enable graphic acceleration using OpenGL or OpenGLES with efl
libraries.
The full OpenGL option depend on X11, because full OpenGL means GLX,
which means X11. Also select efl xlib support when full OpenGL is
selected.
Enable OpenGL ES when EGL API is enabled, otherwise the build fail with
this error:
configure: error: OpenGL ES requires EGL, please add --enable-egl to your configure options to switch to EGL + OpenGL ES.
With the upcomming Wayland support in EFL Buildroot packaging,
OpenGL ES support is recommended.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- use a single ifeq/else ifeq/else ifeq/endif block
- remove the "default" for the choice, move the "none" choice at the
end, and simply rely on the first choice having its dependencies met
being automatically enable by kconfig. So OpenGL first, then
OpenGLES, and then none.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the .config contains invalid configuration *(e.g. two providers for
a same virtual package), it is not possible to run "make distclean"
because the .config file is sourced and packages interpreted in this
case.
Add distclean to the noconfig list, so that we can run it in all cases.
However, this meand that DL_DIR is no longer set, and thus the default
download location never removed. We fix that by always removing the
download location, so that if it is the one configured we still remove
it (no change) and if it is not the one configured, we remove an
non-existing location and leave the user's location intact (no change
either).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently all cmake packages depend on host-cmake. Unfortunately
host-cmake takes a long time to configure and build: almost 7 minutes
on a dual-core i5 with SSD. The time does not change even with ccache
enabled.
Indeed, building host-cmake is avoidable if it is already installed on
the build host: CMake is supposed to be quite portable, and the only
patch in Buildroot for the CMake package seems to only affect
target-cmake.
Thus we automatically skip building host-cmake and use the one on the
system if:
- cmake is available on the system and
- it is recent enough.
First, we leverage the existing infrastructure in
support/dependencies/dependencies.mk to find out whether there's a
suitable cmake executable on the system. Its path can be passed in the
BR2_CMAKE environment variable, otherwise it defaults to "cmake". If
it is enabled, found and suitable then we set BR2_CMAKE_HOST_DEPENDENCY
to empty; otherwise we set BR2_CMAKE_HOST_DEPENDENCY to 'host-cmake' and
override BR2_CMAKE with "$(HOST_DIR)/usr/bin/cmake" to revert to using
our own cmake (the old behaviour).
Then in pkg-cmake.mk we replace the hard-coded dependency on host-cmake
to using the BR2_CMAKE_HOST_DEPENDENCY variable, and we use $(BR2_CMAKE)
instead of $(HOST_DIR)/usr/bin/cmake.
Unlike what we do for host-tar and host-xzcat, for host-cmake we do
not add host-cmake to DEPENDENCIES_HOST_PREREQ. If we did, host-cmake
would be a dependency for _any_ package when it's not installed on the
host, even when no cmake package is selected.
Cmake versions older than 3.0 are affected by the bug described and
fixed in Buildroot in ef2c1970e4 ("cmake: add patch to fix Qt mkspecs
detection"). The bug was fixed in upstream CMake in version 3.0 [0].
Amongst all the cmake packages currently in Buildroot, the currently
highest version mentioned in cmake_minimum_required() is 3.1 (grantlee
and opencv3).
Thus we use 3.1 as the lowest required cmake for now, until a package is
bumped, or a new package added, with a higher required version.
[0] https://cmake.org/gitweb?p=cmake.git;h=e8b8b37ef6fef094940d3384df5a1d421b9fa568
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr:
- simplify logic in check-host-cmake.mk;
- set and use BR2_CMAKE_HOST_DEPENDENCY, drop USE_SYSTEM_CMAKE;
- bump to cmake 3.1 for grantlee and opencv;
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides Xvisor, an open-source type-1 hypervisor,
which aims at providing a monolithic, light-weight, portable, and
flexible virtualization solution.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- use MKIMAGE_ARCH instead of BR2_ARCH when calling mkimage
- use $(MKIMAGE)
- license is GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfig clones, such as openconf used by xvisor [1], do not look for
.config at the root of the build directory, but in a subdirectory (e.g.
build/openconf).
This patch introduces a new Makefile variable named
$(2)_KCONFIG_DOTCONFIG, which contains the path to .config relative to
the source directory of the package. It defaults to .config and can be
overridden in the package Makefile.
It also creates the full directory hierarchy where the .config file is
stored, in case it does not exist (e.g. in xvisor).
This allows the use of the kconfig-package infrastructure with packages
relying on such clones.
[1] https://github.com/xvisor/xvisor/tree/master/tools/openconf
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use "install -D" instead of "mkdir + cp", as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, calling foo-reconfigure for a kconfig-based package will not
re-trigger the configuration (kconfig-wise) step for the package.
This can be problematic when using an override-srcdir suring development
and the content of the veride-srcdir changes (e.g. on a rebase, a merge,
or during a bisect).
This is because the configuration (kconfig-wise) of the package is not
done in the _CONFIGURE_CMDS block, but as a separate action that is not
part of any step [0].
So, be sure to remove the stamp file .stamp_kconfig_fixup_done during
the foo-clean-for-reconfigure rule, so that the configuration is applied
again with the new source tree.
We use another rule, foo-clean-kconfig-for-reconfigure, because we do
not want to override the default foo-clean-for-reconfigure rule, and we
have no way to add conditional commands to it.
[0] The reasons it was not done are not entirely clear in my head, but
IIRC that was not working at the time we tried with Thomas DS.
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building upmpdcli aborts because of an unsafe header inclusion of
`/usr/include/libupnpp`. Using `{prefix}` to get the header path is
wrong for cross-compilation.
Instead of hard-coding the flags for libupnpp use pkg-config to get the
correct ones.
Note that this patch adds the host-pkgconfig dependency unconditionally and
removes the necessity to pass the libupnpp manually to LIBS for a static
build.
Upstream-status: https://github.com/medoc92/upmpdcli/pull/49
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not directly obvious why we select pcre but not add it to the .mk
file, so add a comment to clarify.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcap-ng.so library is released under LGPLv2.1+ and programs testcap,
filecap, netcap and pscap are released under GPLv2+.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Programs are released under GPLv2+. README file says libraries
libaudit.* and libauparse.* are released under LGPL but there are two
files auparse/strsplit.c and lib/strsplit.c which are released under
GPLv2+ which makes both libraries GPL. Until we review situation with
upstream, we simply mention "unclear (libraries)".
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: add "unclear (libraries)" as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit upstream 51925b7dd6d0("package/audit: Bump to version 2.6.5")
removed patch 0002 as part of version bump. But forgot to disable
autoreconf.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
login and hwclock can be built with audit support. This patch adds
optional dependency on audit package if it is already selected.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fdisk and sfdisk tools can be built with readline support. This patch
adds optional dependency on readline if it is already selected.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And copy firmware for BCM43430 and BCM43438, hence rpi3 wifi support at
last.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit a0aa7e0e17 and reworks
the code to fix a major and potentially catastrophic bug when the
following conditions are met:
- The user has selected a "known toolchain profile", such as a Linaro
toolchain, a Sourcery CodeBench toolchain etc. People using "custom
toolchain profile" are not affected.
- The user has enabled BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y to
indicate that the toolchain is already locally available (as
opposed to having Buildroot download and extract the toolchain)
- The user has left BR2_TOOLCHAIN_EXTERNAL_PATH empty, because his
toolchain is directly available through the PATH environment
variable. When BR2_TOOLCHAIN_EXTERNAL_PATH is non-empty, Buildroot
will do something silly (remove the toolchain contents), but that
are limited to the toolchain itself.
When such conditions are met, Buildroot will run "rm -rf /*" due to
TOOLCHAIN_EXTERNAL_INSTALL_DIR being empty.
This bug does not exist in 2016.05, and appeared in 2016.08 due to
commit a0aa7e0e17.
Commit a0aa7e0e17 removed the assignment
of TOOLCHAIN_EXTERNAL_SOURCE and TOOLCHAIN_EXTERNAL_SITE to empty, as
part of a global cleanup to remove such assignments that supposedly
had become unneeded following a fix of the package infrastructure
(75630eba22: core: do not attempt
downloads with no _VERSION set).
However, this causes TOOLCHAIN_EXTERNAL_SOURCE to be non-empty even
for BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y configuration, with the
following consequences:
- Buildroot downloads the toolchain tarball (while we're saying the
toolchain is already available). Not dramatic, but clearly buggy.
- Buildroot registers a post-extract hook that moves the toolchain
from its extract directory (output/build/toolchain-external-.../ to
its final location in host/opt/ext-toolchain/). Before doing this,
it removes everything in TOOLCHAIN_EXTERNAL_INSTALL_DIR (which
should normally be host/opt/ext-toolchain/).
Another mistake that caused the bug is commit
b731dc7bfb ("toolchain-external: make
extraction idempotent"), which introduce the dangerous call "rm -rf
$(var)/*", which can be catastrophic if by mistake $(var) is
empty. Instead, this commit should have just used rm -rf $(var) to
remove the directory instead: it would have failed without consequences
if $(var) is empty, and the directory was anyway already re-created
right after with a mkdir.
To address this problem, we:
- Revert commit a0aa7e0e17, so that
_SOURCE and _SITE are empty in the pre-installed toolchain case.
- Rework the code to ensure that similar problems will no happen in the
future, by:
- Registering the TOOLCHAIN_EXTERNAL_MOVE hook only when
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y, since moving the toolchain is
only needed when Buildroot downloaded the toolchain.
- Introduce a variable TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR which
is the path in which Buildroot installs external toolchains when it
is in charge of downloading/extracting them. Then, the
TOOLCHAIN_EXTERNAL_MOVE hook is changed to use this variable, which
is guaranteed to be non-empty.
- Replace the removal of the directory contents $(var)/* by removing
the directory itself $(var). The directory was anyway already
re-created if needed afterwards. Thanks to doing this, if $(var)
ever becomes empty, we will do "rm -rf" which will fail and abort
the build, and not the catastrophic "rm -rf /*".
Reported-by: Mason <slash.tmp@free.fr>
Cc: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to handle this return code, so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we use a mainline kernel for wandboard, we no longer
need to select BR2_LINUX_KERNEL_CUSTOM_GIT, so remove it.
This fixes the following warning:
make wandboard_defconfig
/configs/wandboard_defconfig:19:warning: override: BR2_LINUX_KERNEL_CUSTOM_VERSION changes choice state
#
# configuration written to /home/fabio/buildroot/.config
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's now an sun8i-h3-orangepi-pc dts, so we can use that and drop the
hack in the post-image script.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MPM can be selected between event, prefork or worker
Set worker as the default one as it was before even if event MPM is
better on system supporting thread safe polling
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though 4.8 is not released yet, some people may want to build a
system using the 4.8-rc kernel, and point to the kernel sources as the
kernel headers to use for the toolchain.
In order to make this possible, this commit adds support for specifying
4.8 as the kernel headers version, in both the internal and external
toolchain logic.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: remove support for 4.8 headers selection, and rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.
As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make explicit that a ext4 rootfs is used.
As explained by Thomas Petazzoni:
"the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2
image is in fact an ext4 image:
-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas 11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2"
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMakelist.txt tries to enable the cxx_long_long_type option,
even if the feature isn't available. (Which causes some builds to fail)
The included patch checks if the option is present before applying it.
The patch was backported from:
4dbb564619
Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After we simplified the libssh2 dependencies, the new dependencies were
not propagated to the php-ssh2 package, causing circular dependencies:
package/openssl/Config.in:1:error: recursive dependency detected!
package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBSSH2
package/libssh2/Config.in:1: symbol BR2_PACKAGE_LIBSSH2 is selected by BR2_PACKAGE_PHP_SSH2
package/php-ssh2/Config.in:1: symbol BR2_PACKAGE_PHP_SSH2 depends on BR2_PACKAGE_OPENSSL
Just drop the now-useless dependency inherited from libssh2: libssh2 now
has no dependency.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by bug #9176 the current v4.6 kernel config
(used by Minnowboard MAX and Turbot) does not support
USB disks. Since this is a pretty essential functionality,
it's desirable to have it, so let's add the required options.
Kernel config linux-v3.8.config (currently used by the first
generation Minnowboard) doesn't need this change.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.
This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
The offset of the first partition was 1MB in the script and is
modified to 8MB in the template.
* Fixes the readme.txt file accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
genimage.cfg.template because they all use the same layout. The only
difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The latest version of binutils, 2.27, added in commit
b700157db4, fails to build on systems
that don't have makeinfo installed. This commit therefore applies the
same fixup as the one used for binutils 2.26, which consists in
touching all the .info files, so that they don't get rebuilt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh2 has
inherited the dependency from libgcrypt (propagated from libgpg-error).
However, since libssh2 can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.
But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.
Fix this dependenc byt doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh has
inherited the dependency from libgcrypt (propagated from libgpg-error).
However, since libssh can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.
But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.
This in itself is already incorrect, but that can cause further issues,
as some packages (e.g. Kodi) will select (indirectly) openssl, and has
an option to select libssh; enabling that option causes unmet direct
dependencies of libssh:
warning: (BR2_PACKAGE_KODI_LIBSSH) selects BR2_PACKAGE_LIBSSH which
has unmet direct dependencies (BR2_USE_MMU && !BR2_STATIC_LIBS &&
BR2_TOOLCHAIN_HAS_THREADS && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS
&& !BR2_PACKAGE_OPENSSL)
Fix this dependency by doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jemalloc can be compiled with valgrind support being enabled
to produce proper output, so when the valgrind package has
been configured configure jemalloc appropriately.
In addition, make sure to disable valgrind support unconditionally in
the host variant of jemalloc.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.
Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.
With this method the uboot-env.txt file is no longer needed, so it is
removed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.
As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates libusb to version 1.0.20, and adds a patch that
should fix parallel make issues particular to this version and probably
fixed in the next version.
This commit also moves to using Github as the source for libusb.
Signed-off-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously they were set at next available version, which is problematic
since new syscalls can be introduced.
So switch to lower available.
There's a caveat for 3.1 and 3.0 headers though since there's no lower
than 3.2, so keep it at 3.2 for those unfortunately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't force remounting / read/write when using a customskeleton and
systemd as init system, to fix the following unmet dependencies:
warning: (BR2_INIT_SYSTEMD) selects BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
which has unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate dependencies from freerdp to fix the following unmet
dependencies:
warning: (BR2_PACKAGE_WESTON_RDP) selects BR2_PACKAGE_FREERDP which has
unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR &&
!BR2_STATIC_LIBS && BR2_TOOLCHAIN_HAS_THREADS && BR2_USE_MMU &&
BR2_TOOLCHAIN_HAS_SYNC_4)
Reorder deps to have architectures deps first.
Remove "broken" dependency from comment; add missing ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate dependencies from docker-containerd to fix the
following unmet dependencies:
warning: (BR2_PACKAGE_DOCKER_ENGINE_DAEMON) selects
BR2_PACKAGE_DOCKER_CONTAINERD which has unmet direct dependencies
(BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS &&
BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS && BR2_TOOLCHAIN_HAS_THREADS &&
BR2_USE_MMU && BR2_USE_WCHAR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate the Xenomai dependencies to the corresponding kernel
extension, to fix the following unmet dependencies:
warning: (BR2_LINUX_KERNEL_EXT_XENOMAI) selects BR2_PACKAGE_XENOMAI
which has unmet direct dependencies (BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
&& BR2_TOOLCHAIN_HAS_THREADS && !BR2_TOOLCHAIN_USES_MUSL)
While at it, move the comment lower, after the path option, so that the
path option is properly indented in the menuconfig.
Add markers to separate each extension.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions that are required
for newer kernel series.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches the galileo_defconfig to use the orignal Linux
kernel repo, which was used prior to commit
fc8cac962b.
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for quite a while and it's now replaced by the more
modern and up to date webkitgtk package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qemu buildsystem expects that the cpp it is passed can be called
like it were cc: it passes it the '-c' option, which is not allowed by
cpp, but is allowed for cc.
Fix that by overriding CPP when calling configure.
Note: the target variant of Qemu does not build the affected parts (the
PC-BIOS images). This is another problem that should be fixed separately.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-findfs and --enable-lsblk configure options don't exist
anymore. Now, findfs and lsblk are always built by default unless you
pass --disable-all-programs to the configure script.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building php, the package will also build/install phpdbg.
This patch explicitly disables this behaviour.
Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that 2.26.x is stable and there's 2.25.x to fallback for whatever
reason it makes no sense to keep two versions back from default.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport two upstream patches to fix a build failure on MIPS and SPARC
architectures when using recent binutils versions. It appears that on
these architectures pt-vfork.S includes vfork.S (through the alpha
version of pt-vfork.S) and that the __vfork aliases are not
conditionalized on IS_IN (libc) like on other architectures. Therefore
the aliases are also wrongly included in libpthread.so.
The build failure looks like this:
/br/output/build/glibc-2.22/build/nptl/libpthread.so:(*IND*+0x0):
multiple definition of `vfork@GLIBC_2.0'
/br/output/build/glibc-2.22/build/nptl/libpthread.so::(.text+0xeea0):
first defined here
This problem was reported in Debian here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=827477
Upstream patches here:
https://sourceware.org/git/?p=glibc.git;a=commit;h=43c2948756bb6e144c7b871e827bba37d61ad3a3https://sourceware.org/git/?p=glibc.git;a=commit;h=b87c1ec3fa398646f042a68f0ce0f7d09c1348c7
I have tweaked them a little bit in order to not patch the ChangeLog
file, otherwise it will fail.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New version has been build- and run-tested on x86_64 and aarch64.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pugixml is a light-weight C++ XML processing library. It features:
* DOM-like interface with rich traversal/modification capabilities
* Extremely fast non-validating XML parser which constructs the DOM tree from an XML file/buffer
* XPath 1.0 implementation for complex data-driven tree queries
* Full Unicode support with Unicode interface variants and automatic encoding conversions
Homepage: http://pugixml.org/
Repository: https://github.com/zeux/pugixml
Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
1.6.23 tarballs have moved so, while we are at modifying libpng.mk, bump to 1.6.25.
[Peter: add back upstream sha1 hash]
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust some patches to avoid patching the ChangeLog which isn't quite
the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Mysql Native Driver has been the default mysql driver since
PHP 5.4, but buildroot was still using libmysqlclient.
Mysqlnd has several advantages such as improved memory management
and the more favorable PHP licensing terms.
(can combine it with proprietary PHP extensions like Ioncube
loader, while libmysqlclient requires commercial licensing if you
link to it and do not fall under their GPL/FOSS license exception)
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
expedite from 1.15 branch doesn't build anymore with efl 1.18 due to
API changes. Since there is no new release or 1.18 scpecific branch,
use the latest commit.
Add a hash file.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fix hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elementary package is not used anymore, remove it.
Add a legacy entry.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: move the legacy entry at the right place.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevas-generic-loaders is now provided by efl package, so remove
libevas-generic-loaders package dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to homepage download URL to get the smaller xz-compressed variant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop all of the upstreamed patches (not precisely in the same form) and
rebase the only required patch for proper static builds with staging
libs required by other packages.
Build-tested for arm-glibc, arm-uclibc, arm-musl and arm-uclibc-static.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new patch does change behavior, but it was accepted by upstream and
could be removed on next version bump.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a compile error not yet caught by autobuilders:
In file included from /home/bernd/buildroot/br2/output/build/kodi-pvr-vbox-15e864d160da5a051e18aef06f3a53e49808be02/src/client.cpp:24:0:
/home/bernd/buildroot/br2/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/kodi/xbmc_pvr_dll.h:423:63: error: 'SEEK_SET' was not declared in this scope
long long SeekLiveStream(long long iPosition, int iWhence = SEEK_SET);
^~~~~~~~
/home/bernd/buildroot/br2/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/kodi/xbmc_pvr_dll.h:510:67: error: 'SEEK_SET' was not declared in this scope
long long SeekRecordedStream(long long iPosition, int iWhence = SEEK_SET);
^~~~~~~~
CMakeFiles/pvr.vbox.dir/build.make:62: recipe for target 'CMakeFiles/pvr.vbox.dir/src/client.cpp.o' failed
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_6_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_PVR_VBOX=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_XORG7=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fix from commit 26248571b6 ("micropython: fix build failures") was
applied upstream. This replaces the local buildroot fix with the patch
that was accepted upstream.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng011.
This engenering build contains the following updates:
1. rebase binutils on top of the latest upstream master
2. update GCC to version 6.2
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Upstream patches removed.
- Do not autoreconf since this was neecessary for one of those patches
that are now upstream. Also remove host-gettext dependency for the
same reason.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libjpeg and jpeg-turo are providers of the jpeg virtual package, so they
must declare themselves as such.
We do not have any problem, because the dependency is computed from the
Kconfig-defined option BR2_PACKAGE_PROVIDES_JPEG, and we do not check
the Makefile-defined <FOO>_PROVIDES variable.
For the sake of correctness, make both libjpeg and jpeg-turo declare
themselves as providers for the jpeg virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of depending on each provider of cryptodev, make openssl depend
on the virtual package.
This is easy because in both cases the openssl build systems needs the
same configuration options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cryptodev-linux and ocf-linux are providers of the cryptodev virtual
package, so they must declare themselves as such.
We do not have any problem for now, as the only consumer (openssl) of
both cryptodev-linux and ocf-linux did not depend on the virtual package
but on each provider. The other consumer is gnutls, but has only a
dependency on cryptodev-linux.
However, openssl can be turned into a proper consumer of the virtual
package, which would trigger the bug.
For the sake of correctness, make both cryptodev-linux and ocf-linux
declare themselves as providers for the cryptodev virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #8206, the mplayer configure script fails to detect
the availability of X11 header/library if the X.org development packages
are not installed on the build machine.
This is due to the logic used by the mplayer configure script, which
looks like this:
for I in $(echo $extra_cflags | sed s/-I//g) /usr/include ; do
if test -f "$I/X11/Xlib.h" ; then
_x11_headers="yes"
So, in other words, it:
1/ Parses the --extra-cflags option, and finds the -I options in there.
2/ Looks in /usr/include
Since $(STAGING_DIR)/usr/include is in the compiler built-in search path
for headers, we currently don't explicitly pass it in --extra-cflags, so
mplayer only looks in /usr/include. If you have X11 headers there thanks
to being installed on your build machine, everything works fine (the
rest of the build logic really uses the headers and libraries of the
cross-compiler). But if you don't have X11 headers in /usr/include, the
configure scripts assumes X11 is not available.
Since fixing the hand-written configure script of mplayer, hosted in a
Subversion repository, is beyond sanity, we simply work around this
problem by passing the appropriate -I$(STAGING_DIR)/usr/include option
in --extra-cflags.
Before this patch, during the configure script:
Checking for X11 headers presence ... no (check if the dev(el) packages are installed)
Checking for X11 ... no (check if the dev(el) packages are installed)
And then, the mplayer binary:
0x00000001 (NEEDED) Shared library: [librt.so.0]
0x00000001 (NEEDED) Shared library: [libz.so.1]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libdl.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libc.so.0]
With this patch, during the configure script:
Checking for X11 headers presence ... yes
Checking for X11 ... yes
And then, the mplayer binary:
0x00000001 (NEEDED) Shared library: [librt.so.0]
0x00000001 (NEEDED) Shared library: [libz.so.1]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libdl.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXinerama.so.1]
0x00000001 (NEEDED) Shared library: [libXxf86vm.so.1]
0x00000001 (NEEDED) Shared library: [libc.so.0]
Fixes bug #8206
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current BR2_GCC_ENABLE_TLS can cause users to make incorrect
choices, and is not very useful. This options allows to decide whether
we pass --enable-tls or --disable-tls to gcc, to enable or disable
support for Thread Local Storage.
Its behavior is:
- The option is default to "y" but only exists if we're using
uClibc/NPTL or glibc.
- When we're using uClibc, the option can be disabled.
So, in practice, this means that currently:
- TLS support is always on for glibc
- TLS support is on by default for uClibc/NPTL, but can be disabled in
the configuration. This is in fact bad and causes the build failure
reported in bug #7424 (this bug is still reproducible on master)
- TLS support is always disabled for uClibc/no-thread and
uClibc/linuxthreads.
- TLS support is always disabled for musl. This does not cause any
build failure, but musl can use TLS support, and therefore be more
efficient. According to
http://www.openwall.com/lists/musl/2012/10/04/1, "Note that if you've
been building gcc with --disable-tls, __thread was already working
but gets emulated (very poorly; it's slow and will abort() if it runs
out of memory) through libgcc.".
So, this commit completely removes the BR2_GCC_ENABLE_TLS and instead
makes the right choice inside gcc.mk directly:
- TLS support enabled for glibc, musl and uClibc/NPTL
- TLS support in other cases, i.e uClibc/no-thread and
uClibc/linuxthreads.
We have intentionally *not* added the option to
Config.in.legacy. Indeed, the new behavior is *exactly* the same as the
older behavior, with the exception of:
- People can no longer disable TLS support in uClibc/NPTL, which was
anyway causing a build failure and therefore was not used.
- TLS support is now enabled on musl, but people using musl already had
BR2_GCC_ENABLE_TLS not set, so they wouldn't get the legacy warning.
Fixes bug #7424.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Back in 2005, in commit
a2c326396a ("update valgrind to the latest
and greatest"), an explicit --disable-tls option was added. More
recently, in commit 31a3f4bd54 ("valgrind:
enable tls support") changed this to be conditional on
BR2_GCC_ENABLE_TLS.
However, the configure script of valgrind is perfectly capable of
detecting TLS support, even in a cross-compilation case: it tries to
compile a program that uses __thread and sees if it works.
Since we're about to modify how BR2_GCC_ENABLE_TLS is handled, we'd
better remove its usage from packages, and valgrind is the only package
using this config option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng010.
This engenering build contains different fixes done to TLS and
PIE features. Appropriate custom patches are removed as they have
been added to eng010.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/928be69f90476e6b04be3a1afd3b74112bcac0a0
As mentioned in sha2/README, by default, tinydtls uses u_intXX_t data types
for 8 bit, 32 bit, and 64 bit unsigned integer type definitions. To use
uintXX_t data types as defined by recent ANSI C standards and as included in
the inttypes.h header file, SHA2_USE_INTTYPES_H has to be define at compile
time.
[Peter: reword/simplify]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling with a toolchain targetted at ucLinux, libserialport's
configure.ac would fail at detecting the target operating system.
As a result, the Linux-specific files were not compiled in that
particular case.
While this commit does not fix any autobuider failure for this package,
it fixes autobuilder failures for other packages, for instance:
http://autobuild.buildroot.net/results/69e/69e43bc171e554cf10f2ad526cebf5e0e524538a/
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sconeserver uses pkg-config macros and uses autoreconf, so it
unconditionally needs host-pkgconf.
[Peter: drop host-pkgconf from sub options, update description]
Reported-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 73da2ff6f7.
The reason for adding support for a local location was to be able to do
development on the Linux kernel source tree on a local directory rather
than have to clone it for every build.
We already have a mechanism for that, it's called override-srcdir. It's
been available since September 2011, more than a year before this patch
was committed.
Otherwise, we're going to be adding support for local sources in other
packages. First was U-Boot as submitted by Adam. But what next? We can't
have such support for all packages, especially since override-srcdir
does the job.
Besides, using a local source tree makes the build non-reproducible, so
we don't really want to have this in a .config (or defconfig).
We only handle the boolean option in legacy, as there is nothing we can
do with the directory path.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rafal Fabich <rafal.fabich@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The android-tools code is somewhat ugly, and defines its own u64 typedef
becore including kernel headers. Unfortunately, there are specific cases
where that doesn't work properly.
The android-tools code defines u64 as "unsigned long long", which is now
correct in the kernel. However, it used to be a time where u64 was
defined as "unsigned long" on a few 64 bits architecture (at least
PowerPC64 and MIPS64). The kernel headers have introduced a
__SANE_USERSPACE_TYPES__ macro that userspace can define in order to get
the "sane" definition, i.e "unsigned long long" for u64.
Unfortunately, this __SANE_USERSPACE_TYPES__ mechanism only appeared in
3.10 on PowerPC64, and in 3.16 on MIPS64.
Since android-tools is not using the autotools, and there's no easy way
to test types with the C pre-processor, we simply add some more
Config.in dependencies. They are a bit convoluted, but that's what the
dependency really is.
In our autobuilders, this issue was only showing up with an old MIPS64
toolchain that uses 3.9 kernel headers.
Also, since the problem is limited to the "fastboot" tool, the
dependency is only added for fastboot. Both adb and adbd build fine with
this toolchain.
Fixes:
http://autobuild.buildroot.net/results/ce45c995bd6abda6487ae3a11b4f45a7b9b3f8eb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to libiio 0.7, the systemd service file that used to be
in debian/iiod.service no longer exists. The entire debian/ directory
has been removed from the upstream project:
5d49f58982
Due to this, the installation of this service file fails, and causes
build failures. To address this, we simply remove the installation of
the systemd service file.
Fixes:
http://autobuild.buildroot.net/results/ce2fc81466abd9619aa104c96234d1455de3480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4590 - mishandles about: URLs, which allows remote attackers to
bypass the Same Origin Policy via a crafted web site.
CVE-2016-4591 - mishandles the location variable, which allows remote
attackers to access the local filesystem via unspecified vectors.
CVE-2016-4622 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site, a
different vulnerability than CVE-2016-4589, CVE-2016-4623, and
CVE-2016-4624.
CVE-2016-4624 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site, a
different vulnerability than CVE-2016-4589, CVE-2016-4622, and
CVE-2016-4623.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default Blackfin processor in Buildroot isn't supported by
gcc 6.1.0, so use bf532 as default. Disable any bf6xx processors
for internal toolchain users.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, a document can not have dependencies, except for the purely
internal ones (like checking asciidoc version, and presence of dblatex).
For our own manual, this will come in handy when we introduce a
generated kconfig snippet, so we can actually make the manual depend on
that snippet being generated first.
For external documents, it can be used to depend on host-packages if
need be (e.g. a custom host packages that generates specific media files
included in the manual).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some of those directories will be needed even during configuration, like
BUILD_DIR, where we'll store the generated kconfig snippet.
So, move the rule to create them outside the BR2_HAVE_DOT_CONFIG block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fixup commit log, as noticed by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all configurators depend on generating the out-of-tree
Makefile wrapper.
In an upcoming patch, we'll need to also generate a kconfig fragment,
so it will have to kick in before we run the configurators.
Introduce a new intermediate "prepare-kconfig" rule, so we can
commonalise the dependencies of the configurators. Move the dependency
on the Makefile wrapper to that new intermediate rule.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mark prepare-kconfig as a phony target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The code for both cases is exactly the same, and only differs in the
location where defconfig files are looked for.
We use an intermediate macro to generate the corresponding rules,
because directly generating the rules is ugly and needs lots of escaping
and double-dollar-ing for the $(eval ...) and $(foreach ...) calls to
play nicely together.
Furthermore, that will be tremendously useful when we support multiple
br2-external trees.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: move comment outside of the make target, so that it isn't
displayed on stdout when loading a defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-utils.mk contains various definitions that are used in the package
infrastructures and packages themselves.
However, those definitions can be useful in other parts of Buildroot,
and are already used in a few places that are not related to the package
infrastructure. Also, $(sep) will be needed early in the Makefile when
we eventually support multiple br2-external trees.
Since this file only contains definitions, we can include it anytime.
So, consider that file to no longer be specific to the package infras:
- move it to support and rename it,
- move a few similar definitions from the main Makefile to that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With glibc 2.16, we get following build error when building jack2:
[193/247] cxx: tests/iodelay.cpp -> build/tests/iodelay.cpp.4.o
../tests/iodelay.cpp:171:43: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:171:55: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:172:44: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:172:56: error: 'UINT32_MAX' was not declared in this scope
In glibc 2.17 or older version, Header <stdint.h> defines these macros
for C++ only if explicitly requested by defining __STDC_LIMIT_MACROS.
We can't use <cstdint> since it requires C++11 standard.
Fixes:
http://autobuild.buildroot.net/results/369ce208ffea43dad75ba0a13469159b341e3bf5/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The trousers code uses getpwent_r, which is not available in musl.
Detect the availability of getpwent_r in the trousers build system, and
use it conditionally.
This broke the build of tpm-tools because linking with libtspi.so
failed.
Fixes:
http://autobuild.buildroot.net/results/830fc20c68a0653afa5567edffc2ededc4e45cc6
Runtime-tested by running tpm_version in a chroot and verifying that it
creates a "user.data" file with both the Buildroot-provided CodeSourcery
and Musl toolchains on x86_64.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was not noticed until now because:
1/ The older Blackfin toolchain doesn't have libatomic, so it didn't
provide the atomic operations that protobuf needs, so protobuf was
never built.
2/ The ARM Cortex-M toolchain is static-only, and protobuf requires
dynamic library support.
So it's only with the new Blackfin toolchain, which is based on gcc
6.x (and therefore provides libatomic) and is FDPIC-based (and therefore
has dynamic library support) that this problem appeared.
Since protobuf already has a BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS option,
we use it to add the BR2_USE_MMU dependency (which is architecture
related), which avoids the need to propagate the dependency.
Fixes:
http://autobuild.buildroot.net/results/2c1/2c151e84d7854a810465dc16869023e0ada2d586/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- move the BR2_USE_MMU dependency under
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS and remove the propagation to
reverse dependencies of protobuf, since they already depend on
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS.
- improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pixman ARM optimized code assumes that ARM instructions are
available. Unfortunately, the configure.ac checks do not detect that the
platform is Thumb-only for Cortex-M builds, so it enables the ARM
optimizations, leading to failures like:
error: /home/test/autobuild/run/instance-3/output/host/usr/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpixman-1.a(pixman-arm-simd-asm-scaled.o): Conflicting CPU architectures 13/1
When building programs linked with pixman on Thumb-only
architectures. This is due to the fact that some object files in
libpixman-1.a are built for the ARM instruction set.
To resolve this, we give better hints to the pixman configure script
about which ARM optimizations to use: the ARM SIMD optimizations need at
least a CPU that supports ARM instructions, and obviously the ARM NEON
optimizations need NEON support.
Fixes:
http://autobuild.buildroot.net/results/54bee2ce382fcd067965d30f758f9d15514478d9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add a comment above the --enable-arm-simd option, as suggested
by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of bumping vlc to git master (no vlc 3.x release yet) we use a
patch from deb-multimedia.org which provides the necessary changes for
ffmpeg 3.x support to vlc 2.2, compile-tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_POSTPROC=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_VLC=y
This patch can be removed when vlc is bumped to 3.x.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option is needed to prevent this message from configure:
WARNING: unknown CPU. Disabling all MIPS optimizations.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- group with the other --cpu conditions so that only one is passed.
- improve the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With a small patch, blktrace can work on uClibc: we simply need to link
with librt to use the posix_spawn*() functions.
[Thomas: add reference to upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As recently discussed on lwn.net: https://lwn.net/Articles/695478/
The kernel has special behaviour for uid/gid 65534:
1. The kernel maps UIDs > 65535 to it when some subsystem/API/fs
only supports 16bit UIDs, but a 32bit UID is passed to it.
2. it's used by the kernel's user namespacing as the internal UID
that external UIDs are mapped to that don't have any local mapping.
3. It's used by NFS for all user IDs that cannot be mapped locally if
UID mapping is enabled.
Most distributions already map (or are in the progress of changing)
nobody/nogroup to the 65534 uid/gid, so lets do so as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default boa.conf we install specifies that boa should run under the
nobody group, but we don't have such a group in our default skeleton (and
boa doesn't add it), causing boa to fail to start:
[01/Jan/1970:00:00:10 +0000] No such group: nobody
Instead use the nogroup group, which is presumably what was meant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configure.ac has AM_GNU_GETTEXT(), which will enable i18n if a gettext
library is found. For uClibc, it is found if the gettext package has
been built, and it will add -lintl to the link flags. For musl and
glibc, it is always found, in libc itself so nothing is added to the
link flags.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matt@thewebers.ws>
Tested-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The source files in the domoticz tarballs have DOS line endings, which
don't appear when fetching the source code from Git. Therefore, a patch
generated from the Git repository doesn't apply directly on the source
code extracted from the tarball.
This commit fixes the patch so that it applies cleanly to the
tarball. Notice that the CMakeLists.txt file is not affected, only the
domoticz.cpp file uses DOS line endings.
While we're at it, we change the patch title prefix from [PATCH 1/1] to
just [PATCH].
Fixes:
http://autobuild.buildroot.net/results/a0539b3551d482411dd4bcd5c9b8c89f77e68475/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump runc to cc29e3dded8e27ba8f65738f40d251c885030a28
This version is required by Docker Engine v1.12.0.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6ad14a3687)
Bump docker-engine to the latest stable v1.12.0 from v1.12.0-rc3.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f892015d78)
domoticz.cpp currently assumes that on GNU/Linux systems header
<execinfo.h> is available. But that is not true. Since it provided by
C library and uClibc can be built without backtrace support. And in
such cases we get following build error.
domoticz-3.4834/main/domoticz.cpp:48:22: fatal error: execinfo.h: No such file or directory
#include <execinfo.h>
^
compilation terminated.
This commit adds patch for detecting presence of <execinfo.h>
and guards code accordingly.
Fixes:
http://autobuild.buildroot.net/results/393/393f839e160b51ca12ac36058718ad2f0c1b50a6/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When commit 031130a4 added the dependency on shared libs for FIT support
in uboot-tools, the dependency of the comment was added exactly as the
dependency of the symbol.
That means the comment is shown when FIT support is possible, and hidden
when it is not, while we want it the other way around...
Fix the dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reproducible build is only in its infancy; it is far from being
complete.
As such, move it to the "advanced" build sub-menu, where it belong for
now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current amd-catalyst options related to the CCCLE tool create the
following Config.in circular dependency:
package/qt/Config.in:134:error: recursive dependency detected!
package/qt/Config.in:134: symbol BR2_PACKAGE_QT_GUI_MODULE is selected by BR2_PACKAGE_AMD_CATALYST_CCCLE
package/amd-catalyst/Config.in:52: symbol BR2_PACKAGE_AMD_CATALYST_CCCLE depends on BR2_PACKAGE_QT_NOPNG
package/qt/Config.in:277: symbol BR2_PACKAGE_QT_NOPNG is part of choice <choice>
package/qt/Config.in:271: choice <choice> contains symbol <choice>
package/qt/Config.in:271: choice <choice> contains symbol BR2_PACKAGE_QT_GUI_MODULE
But in fact, it turns out that selecting BR2_PACKAGE_QT_GUI_MODULE is
not necessary, since we already "depends on BR2_PACKAGE_QT_X11", which
itself selects BR2_PACKAGE_QT_GUI_MODULE. Therefore, to fix this problem
we simply remove the "select BR2_PACKAGE_QT_GUI_MODULE" from the
BR2_PACKAGE_AMD_CATALYST_CCCLE option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, libgtk3 depends on either a full OpenGL stack, or on a
OpenGL-EGL stack provided by mesa3d.
This is because, when using the wayland backend, libgtk3 needs an
OpenGL-EGL stack tht provides the wayland extensions. So far, only
mesa3d would provide those extensions.
But now, those extensions are trickling down to other implementations,
like the Nvidia driver or other (even non-public) implementations.
Change the condition to be on the recently introduced libegl-wayland
option.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wayland requires that an OpenGL/EGL implementation provides a few
extensions, so that wayland servers and clients can exchange buffers.
Currently, only one OpenGL/EGL implementation provides those extensions:
mesa3d.
However, other implementations are catching up, especially the
proprietary NVidia driver, which has as of late introduced those
extensions. Other, non-public implementations may also provide those
extensions.
A lot of wayland-related packages require those extensions, and
currently they have to depend on mesa3d to provide OpenGL/EGL, which
precludes using those packages when a non-mesa3d provider is enabled,
even when that providers implements the necessary extensions.
Add an option to the libegl virtual package, that providers on
OpenGL/EGL can select to state they provide those extensions.
Packages that need those extensions can additionally depend on this new
option, instead of the existing libegl package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AMD Catalyst Linux driver includes a graphical controler center for AMD
graphics accelerators, called Catalyst Controler Center. This commits
adds support to install this tool by adding a separated prompt.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
[Thomas:
- As noticed by Yann, fixed the dependency of the comment related to
the Qt PNG functionality.
- Also add the Qt PNG dependency to the BR2_PACKAGE_AMD_CATALYST_CCCLE
option itself, noticed by Yann.
- Add an empty line, also noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AMD Catalyst driver includes some command line tools for displaying
specific infos about the GL stack or to test 3D, like fglxinfo or
fgl_gears. This commit adds support to install such tools.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commits adds support for the AMD Catalyst Linux driver 15.9
(15.201.1151). It includes the fglrx kernel module with various fixes
to make it work with at least Linux kernel 4.4 LTS, the userspace OpenGL
stack and the xorg driver module.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- fixup whitespace issues noticed by Yann.
- register AMD_CATALYST_PREPARE_MODULE as a post-patch hook rather than
calling it during the configure step, also suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce a new package variable $(PKG)_DL_OPTS. When this variable
is defined, its value is passed to the downloader as options to
the underlying command. Packages can now retrieve archives from server
expecting logins and passwords, use referer url, proxy or specific
options for cloning a repository.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds support to pass options to the underlying command that is used
by downloader. Useful for retrieving data with server-side checking for
user login or passwords, use a proxy or use specific options for cloning
a repository via git and hg.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_BINFMT_FLAT_SEP_DATA can be used to create XIP userland and works fine
for m68k. Unfortunately a lot of basic packages as pcre are not compileable
because of a CPU or hardware limitation. The reason for failing are very
big functions used in the libraries or application code.
Typical errors are:
Fatal error: Tried to convert PC relative branch to absolute jump
or
error: value -yyyyy out of range
Add kernel patch from 4ec5542679 to make
BR2_BINFMT_FLAT_ONE compiled firmware work fine.
Fixes:
http://autobuild.buildroot.net/results/20b/20b1586757450d6aad8583ad7a787a7ca11acef1/http://autobuild.buildroot.net/results/d31/d311955ada1ffcd7f69e82965c8fe33eabe488cd/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment in Config.in file about sep-data existing on m68k,
but being disabled due to build issues with numerous packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64_efi reference defconfig is targeted towards an EFI
environment but the kernel which comes with it does not enable EFI
support by default.
Booting this defconfig without kernel EFI support on a qemu virtual
machine with EFI firmware resulted in no output to tty1 or ttyS0.
Enabling EFI support in the kernel fixed this and seems saner for an EFI
reference Buildroot defconfig.
Adding CONFIG_EFI to board/pc/linux-extras.config also affects
pc_x86_64_bios_defconfig which doesn't require it, however it was
observed that the extra overhead is small and so this is preferred
rather than having a separate config file.
This was tested with qemu 2.6.0 running with kvm enabled and firmware
EFI v2.60 by EDK II. Also built and verified bios defconfig on the same
setup but with BIOS firmware instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mips64, which is available since musl 1.1.15.
Only gcc 6.x has required support for it. Tested variations of
little/big endian and hard/soft float.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_TOOLCHAIN_BUILDROOT_GLIBC option is already not selectable on
BR2_sparc, so there is no need to have an additional "depends on
!BR2_sparc" on each of the glibc versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Older toolchains that use binutils <= 2.23.2 are affected by binutils
bug #14887 (https://sourceware.org/bugzilla/show_bug.cgi?id=14887),
where:
someinstruction [ foo, something ]
is not accepted, due to the whitespace after [ and before ], causing the
following build failures for OpenBLAS:
ARM register expected -- `pld [ r1,#512 ]'
Since we don't have any mechanism to add dependencies on binutils
versions, we work around this problem by patching the code to remove the
problematic whitespaces. As there are many many instances of this in the
ARM assembly code of OpenBLAS, we use a sed expression to make this
modification rather than a patch.
Fixes:
http://autobuild.buildroot.net/results/43e50b480b4aea0fdec745d7875c85377c114cac/
[Peter: use single quotes in sed invocation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise the build fail with this error:
configure.in:53: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:95: error: possibly undefined macro: AM_CONDITIONAL
Also, there is a PKG_CHECK_MODULES used for GTK.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The instructions listed sdcard.img as output image name but
board/pc/genimage-*.cfg generate it named as disk.img instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit
5ab751ca44 ("toolchain-buildroot: allow to
build ppc64(le) musl toolchains"), support for building a musl toolchain
for ppc64(le) was added. Since this support only works with gcc 6, some
additional dependencies have been added to the older gcc versions so
that they cannot be selected on ppc64(le)/musl.
Unfortunately, the expression of the dependency was wrong, and leads to
those older gcc versions being non-selectable if you're not using
musl. Indeed, the dependencies look like this:
depends on !BR2_powerpc64 && !BR2_powerpc64le && BR2_TOOLCHAIN_USES_MUSL
So as soon as you're not using musl, BR2_TOOLCHAIN_USES_MUSL is false,
so the entire condition is false, and the gcc version is not available.
Due to this, only gcc 6.x can be selected currently with uclibc or
glibc, which is clearly not the intended behavior.
This commit reworks those dependencies to:
depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64el))
which more clearly expresses what we want:
"We don't want to (have a toolchain that uses musl and (be building
either for PPC64 or PPC64le))"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise the configure script will probe the distro directories for it
and it may not match what we use, for example fedora uses /etc/pki
instead of /etc/ssl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version brings in several bug fixes: one of which partially
addresses Buildroot autobuilder failures for static configurations.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the SourceForge page still exists, it seems to be a bit outdated,
and there is now a much newer Github repository with recent activity, so
mention it as well in the Config.in help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building jack2:
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t capture_latency = {-1, -1};
^
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t playback_latency = {-1, -1};
^
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
This is fixed by grabbing an upstream commit,
ff1ed2c4524095055140370c1008a2d9cccc5645
Fixes:
http://autobuild.buildroot.net/results/8a8/8a8d533a0f785591fee10f1c09c9294f892ef7f7/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils-arc-2016.09-eng008 build fails sometimes.
This happens due to the following issue:
binutils configure script has CC variable that stores compiler for
target and CC_FOR_BUILD variable that stores compiler for host.
WARN_FLAGS are verified by the script to be compatible only with CC
compiler but not with CC_FOR_BUILD compiler. Despite this WARN_FLAGS
are passed to both CC and CC_FOR_BUILD compilers. This leads to
unevident errors when cross-compiling. More information you can find
in the binutils mailing list:
https://sourceware.org/ml/binutils/2016-08/msg00117.html
We are going to write a patch for bunutils that fixes the initial
issue. Current patch contains temporary workaround. It should be
deleted after real fix.
Fixes:
http://autobuild.buildroot.net/results/00455b6a8324920ad843d90ce0413451522691a8//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building logrotate:
logrotate.c: In function 'postrotateSingleLog':
logrotate.c:1784:5: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
if (!state->doRotate)
^~
logrotate.c:1787:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
if (!hasErrors && log->flags & LOG_FLAG_TMPFILENAME) {
^~
This is fixed by grabbing an upstream commit,
6a36c105587b07ad14fc937f3ee6e2eb402621a2. Once this is fixed, we get:
config.c: In function 'strndup':
config.c:87:10: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if(!s)
^
cc1: all warnings being treated as errors
make[2]: *** [config.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1: all warnings being treated as errors
make[2]: *** [logrotate.o] Error 1
This is due to logrotate providing its own implementation of
strndup(). We could fix it, but it much better to simply use the one
provided by the C library, by fixing the detection method for strndup
availability. This is done in patch
0002-Use-autoconf-checks-for-strndup-and-asprintf.patch.
Fixes:
http://autobuild.buildroot.net/results/6dc2eb22104076920d77425b1e608ef9b9e01c94/
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: replace fix for the nonnull issue with a different one.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As tinycbor uses fopencookie() which is not available with the Blackfin
ADI external toolchain (UCLIBC_HAS_GLIBC_CUSTOM_STREAMS is not enabled),
add a dependency on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX.
This avoids the following build failure:
src/open_memstream.c: In function ‘open_memstream’:
src/open_memstream.c:105: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘vtable’
src/open_memstream.c:105: error: ‘vtable’ undeclared (first use in this function)
src/open_memstream.c:105: error: (Each undeclared identifier is reported only once
src/open_memstream.c:105: error: for each function it appears in.)
src/open_memstream.c:105: error: expected expression before ‘{’ token
src/open_memstream.c:111: warning: implicit declaration of function ‘fopencookie’
src/open_memstream.c:111: warning: return makes pointer from integer without a cast
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas: improve commit message.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest musl release supports ppc64 architecture (both big endian and
little endian), so this commit adds support for this.
Since musl implements the ELFv2 ABI for both big-endian and
little-endian PowerPC64, we have to force using this ABI on PowerPC64
big endian (normally elfv1 is the default).
Also, only gcc 6.x has the necessary changes to support musl on PowerPC
64, so we restrict the gcc version selection accordingly.
Tested with Qemu for big endian and little endian configurations.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment about the ABI flag in gcc.mk, rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ustr Makefile.in (as introduced by the Debian patch we apply), is
probably not parallel-safe:
402 install: install-opt install-dbg
403
404 install-opt: install-dirs install-opt-lib install-common
405
406 install-dbg: install-dirs install-dbg-lib install-common
407
408 install-opt-lib install-dbg-lib install-common: install-dirs
[--SNIP--]
424 install-opt-lib: $(OPT_LIB_STATIC) $(OPT_LIB_SHARED) ustr.pc
425 @echo Installing files
426 install -m 644 -t $(DESTDIR)$(libdir) $(OPT_LIB_STATIC)
427 install -m 755 -t $(DESTDIR)$(libdir) $(OPT_LIB_SHARED)
428 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHARED_NAME)
429 ln -s $(OPT_LIB_SHARED) $(DESTDIR)$(libdir)/$(OPT_LIB_SHARED_NAME)
430 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV)
431 ln -s $(OPT_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV)
432 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV_BSO)
433 ln -s $(OPT_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV_BSO)
434 $(LDCONFIG) -n $(DESTDIR)$(libdir)
435 install -pm 644 -t $(DESTDIR)$(libdir)/pkgconfig ustr.pc
436
437 install-dbg-lib: $(DBG_LIB_STATIC) $(DBG_LIB_SHARED) ustr-debug.pc
438 @echo Installing files
439 install -m 644 -t $(DESTDIR)$(libdir) $(DBG_LIB_STATIC)
440 install -m 755 -t $(DESTDIR)$(libdir) $(DBG_LIB_SHARED)
441 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHARED_NAME)
442 ln -s $(DBG_LIB_SHARED) $(DESTDIR)$(libdir)/$(DBG_LIB_SHARED_NAME)
443 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV)
444 ln -s $(DBG_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV)
445 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV_BSO)
446 ln -s $(DBG_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV_BSO)
447 $(LDCONFIG) -n $(DESTDIR)$(libdir)
448 install -pm 644 -t $(DESTDIR)$(libdir)/pkgconfig ustr-debug.pc
As Thomas already noticed [0], the two interesting rules above are not
dependent one on the other, so can be run in parallel. So, while one is
doing its rm'n'ln dance, the other can be running an ldconfig, which has
the side effect of creating the missing symlinks. So, we can see this
sequence:
install-opt-lib: install-dbg-lib:
ldconfig
rm -f .../$(OPT_LIB_SHAREDEV) \
`-> symlink(..., .../$(OPT_LIB_SHAREDEV))
ln -s .../$(OPT_LIB_SHAREDEV)
In this case, ldconfig uses the opportunity-window between the rm and
the ln to create the link; so the ln does not work, as the target
already exist.
We fix that by not running ldconfig at all in Buildroot, we just pass
LDCONFIG=/bin/true .
Fixes (hopefully, since I was not even able to reproduce the failure):
http://autobuild.buildroot.org/?reason=ustr-1.0.4http://autobuild.buildroot.org/results/936/93626f55625ed7900c147bfd79ff7802366639b1/http://autobuild.buildroot.org/results/18b/18b6ec537da9e9055f58a8649c0719dc64df1bcf/
[...]
[0] http://lists.busybox.net/pipermail/buildroot/2016-May/161923.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now always have a sys/cdefs.h, so we no longer need to patch it out.
Simplify the patch by removing any hunk removing cdefs.h or the use of
__BEGIN_DECLS/__END_DECLS. However, it must be included when macros it
defines are being used.
Also, renumber patches to guarantee ordering (static patch was added
before big-endian one).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl provides neither sys/queue.h nor sys/cdefs.h. Those two headers are
however quite widely used in a lot of packages (though they should at
least not use cdefs.h which is only full of mostly-legacy macros, and
which is mostly an internal header of glibc and was never really meant to
be exposed to, and used by packages).
But we don't live in an ideal world, so a lot of packages break when
those two headers are missing.
We already took care of sys/queue.h with the netbsd-queue package. But
the need for cdefs.h is getting more and more pressing.
We rename the netbsd-queue package into musl-compat-headers, and we
make it install sys/queue.h (from NetBSD) and sys/cdefs.h (a minimalist
one we bundle in Buildroot). We can't use the cdefs.h from NetBSD
because it includes machine-dependent headers; instead we bundle a very
minimalistic one, that covers only what we need.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cpupower linux tool needs gettext, always (even without locales).
We need to disable NLS, otherwise it tries to compile the .po files.
We also need to pass -lintl, otherwise it forgets to link with it
(because, the world is glibc-only, you did not know? And glibc does not
need we link with -lintl, so why would we? Oh, yes, we also reinvented
our super intelligent one-off Makefile rather than use one of the
standard buildsystems).
Fixes#9181:
CC utils/helpers/sysfs.o
In file included from utils/helpers/amd.c:9:0: ./utils/helpers/helpers.h:13:21: fatal error: libintl.h: No such file or directory
#include <libintl.h>
^
Without NLS=false (yes, we could depend on host-gettext):
MSGFMT po/de.gmo
make[3]: msgfmt: Command not found
Without LDFLAGS=-lintl:
CC cpupower
./utils/cpupower.o: In function `main':
cpupower.c:(.text.startup+0x1a4): undefined reference to `libintl_textdomain'
./utils/idle_monitor/cpupower-monitor.o: In function `list_monitors':
cpupower-monitor.c:(.text+0x5dc): undefined reference to `libintl_gettext'
./utils/cpupower-set.o: In function `cmd_set':
cpupower-set.c:(.text+0x38): undefined reference to `libintl_textdomain'
./utils/cpupower-info.o: In function `cmd_info':
cpupower-info.c:(.text+0x20): undefined reference to `libintl_textdomain'
collect2: error: ld returned 1 exit status
Reported-by: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Elfutils program names collide with binutils' binaries. By default
applications provided by elfutils are prefixed with "eu-", but in
Buildroot that setting is overridden by pkg-autotools.
The option in pkg-autotools rules was added to avoid including a target
triple in some packages as a prefix, so restore elfutils default
behaviour by adding a "eu-" program-prefix.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add comment in the .mk file explaining why we have a custom
program prefix, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since [1] <package>-reconfigure target is broken.
$ make elementary-reconfigure
Applying buildroot-libtool-v2.4.4.patch using patch:
Error: duplicate filename 'buildroot-libtool-v2.4.4.patch'
Conflicting files are:
already applied: buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
to be applied : buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
When a package uses AUTORECONF, the libtool patch can be applied a
second time on the same ltmain.sh in the same directory as the
<package>-reconfigure target is called. This is not a problem since
autoreconf will overwrite the previously patched files. But with the
check introduced by [1], apply-patches.sh throw an error when the
package is reconfigured since the libtool patch is already present in
.applied_patches_list.
In addition to this, the .applied_patches_list file generated by
apply-patches.sh while patching ltmain.sh is not in the top-level
package source directory. Instead a duplicated .applied_patches_list
is generated beside the patched ltmain.sh which can be in a
subdirectory.
As noticed by Arnout Vandecappelle [2], the apply-patches.sh script
doesn't bring anything for the libtool patches.
"apply_patches.sh does the following:
* It handles directories -> not needed here.
* It handles compressed patches and tarballs -> not needed.
* It handles series files -> not needed.
* It handles errors in case of multiple patches -> not needed since
it's only one patch.
* It detects errors based on *.rej files -> not needed since it's only
a single patch so patch exit code is OK.
* It writes the patch list -> for libtool, this is quite silly because
it will be written in the directory where ltmain.sh is found, not in the
top-level directory, so you have these patch lists spread over the
source tree."
So use patch directly rather than apply-patches.
[1] 1924159814
[2] http://lists.busybox.net/pipermail/buildroot/2016-August/169810.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When available, libconfuse will use the libintl provided by the gettext
package.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: make it really an optional dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-6313: An attacker who obtains 580 bytes from the standard RNG
can trivially predict the next 20 bytes of output.
Add cryptographically secure sha256 hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-6316: Bug in the mixing functions of Libgcrypt's random number
generator. An attacker who obtains 4640 bits from the RNG can trivially
predict the next 160 bits of output.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In configure script there are some tests that are looking for
a suitable compiler. For this purpose script tries to compile
and link some C++ code that is hardcoded in the body of script.
The problem is that only linker flags ($LDFLAGS) are passed to the
compiler when the script is compiling test code. Therefore some
necessary command line options can be lost and this would lead to
errors.
This exactly happens to ARC:
1. -matomic option is lost as it compiler option,
2. test code compilation fails,
3. the script decides not to use arc-buildroot-linux-uclibc-g++,
4. scipt checks host compiler (x86_64-linux-gnu-g++ in your case),
5. package is being built for x86_64, not for ARC.
About last 2 steps - I don't know why configure script should try
to build stella for host machine. As for me an error should be
raised and a build should be stopped. But this is up to stella
developers.
Current patch adds compiler options ($CXXFLAGS) when compiling
test code in configure script.
Fixes stella build for ARC, e. g.:
http://autobuild.buildroot.net/results/c23/c23d655137b1c1825b1da69b18307c6a1d4b23b8//
[Peter: s/CPPFLAGS/CXXFLAGS/]
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With musl C library, we get following build error
integck.c:37:28: fatal error: bits/stdio_lim.h: No such file or directory
#include <bits/stdio_lim.h>
^
compilation terminated.
make[2]: *** [integck] Error 1
Header <bits/stdio_lim.h> is not available in musl C library. However
<stdio.h> has all definition that <bits/stdio_lim.h> supposed to be
providing. Moreover <bits/stdio_lim.h> shouldn't be included directly
instead we should be using <stdio.h>.
Since we already include <stdio.h> and in case of uClibc or glibc
<bits/stdio_lim.h> gets included internally, we can safely remove it.
Fixes:
http://autobuild.buildroot.net/results/175/1754861457af520480cc34d7d2d0edff2868ff66/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
QtWebkit needs gstreamer-0.10 and the 'app' plugins, so we depend on
gstreamer and select the required plugins.
We can't select gstreamer as that would cause circular dependencies in
kconfig:
package/kodi/Config.in:37:error: recursive dependency detected!
package/kodi/Config.in:37: symbol BR2_PACKAGE_KODI depends on BR2_PACKAGE_KODI_EGL_GLES
package/kodi/Config.in:16: symbol BR2_PACKAGE_KODI_EGL_GLES depends on BR2_PACKAGE_HAS_LIBEGL
package/opengl/libegl/Config.in:1: symbol BR2_PACKAGE_HAS_LIBEGL is selected by BR2_PACKAGE_MESA3D_OPENGL_EGL
package/mesa3d/Config.in:150: symbol BR2_PACKAGE_MESA3D_OPENGL_EGL is selected by BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL
package/mesa3d/Config.in:92: symbol BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL depends on BR2_PACKAGE_MESA3D
package/mesa3d/Config.in:1: symbol BR2_PACKAGE_MESA3D is selected by BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV
package/x11r7/xdriver_xf86-video-imx-viv/Config.in:1: symbol BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV depends on BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11
package/freescale-imx/imx-gpu-viv/Config.in:34: symbol BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11 is part of choice <choice>
package/freescale-imx/imx-gpu-viv/Config.in:27: choice <choice> contains symbol <choice>
package/freescale-imx/imx-gpu-viv/Config.in:27: choice <choice> contains symbol BR2_PACKAGE_FREESCALE_IMX
package/freescale-imx/Config.in:1: symbol BR2_PACKAGE_FREESCALE_IMX is selected by BR2_PACKAGE_GST_FSL_PLUGINS
package/gstreamer/gst-fsl-plugins/Config.in:8: symbol BR2_PACKAGE_GST_FSL_PLUGINS depends on BR2_PACKAGE_GSTREAMER
package/gstreamer/gstreamer/Config.in:5: symbol BR2_PACKAGE_GSTREAMER is selected by BR2_PACKAGE_QT_WEBKIT
package/qt/Config.in:464: symbol BR2_PACKAGE_QT_WEBKIT depends on BR2_PACKAGE_QT
package/qt/Config.in:5: symbol BR2_PACKAGE_QT is selected by BR2_PACKAGE_PYTHON_PYQT
package/python-pyqt/Config.in:5: symbol BR2_PACKAGE_PYTHON_PYQT depends on BR2_PACKAGE_PYTHON
package/python/Config.in:5: symbol BR2_PACKAGE_PYTHON is selected by BR2_PACKAGE_KODI
This one is fairly complicated to fix properly, so it is easier to just
depend on gstreamer.
Also rework the comment when QtWebkit is not available.
Fixes:
http://autobuild.buildroot.org/results/84d/84d338b70c8ce3f21dd202de387326f18526aa63/http://autobuild.buildroot.org/results/379/379ad4eadf5af7e1d5b977bc229d3fcaba25b4fe/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current logic to pass the --{enable,disable}-mipsfpu option is:
ifeq ($(BR2_MIPS_SOFT_FLOAT),y)
FFMPEG_CONF_OPTS += --disable-mipsfpu
else
FFMPEG_CONF_OPTS += --enable-mipsfpu
endif
In practice, this means that on MIPS soft-float, --disable-mipsfpu is
passed, and that in *all* other cases, --enable-mipsfpu is passed,
including if we are *not* targetting the MIPS architecture.
Even though this doesn't seem to cause any problem, it is a bit weird to
see --enable-mipsfpu when you're building ffmpeg for a non-MIPS
architecture, so we better fix this by enclosing the MIPS-related
options in a MIPS condition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_ARM_CPU_HAS_NEON=y, we pass --enable-neon. However, when
BR2_ARM_CPU_HAS_NEON is disabled, we don't pass anything. This generally
works fine, but turned out to integrate NEON code in ARMv7-M
builds (since it's ARMv7, ffmpeg assumed it should enable NEON code).
Even though ffmpeg is now disabled for ARMv7-M, it still makes sense to
be explicit, and disable NEON support when the CPU doesn't have it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump runc to cc29e3dded8e27ba8f65738f40d251c885030a28
This version is required by Docker Engine v1.12.0.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump docker-engine to the latest stable v1.12.0 from v1.12.0-rc3.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add security related bugfix to fix CVE-2016-4429 from
GNU libc project.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng008.
Main updates were made for gcc. It was switched to GCC 6 and to
OSABI v4.
Besides this patch fixes buildroot ARC failures connected to
"crtbeginT.o" object file missing. This issue lead to two main errors:
1) "crtbeginT.o: No such file or directory", e. g. bootutils-1.0.0.
No comments are required here I hope.
2) Errors like "compiler cannot create executables", e.g.:
a) host-gcc-final-arc-2016.09-eng007 static build,
b) aespipe-2.4c.
That was caused because the test to determine if compiler is able to
create executables was failing due to missing "crtbeginT.o" file.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT selects BR2_PACKAGE_DTC, but forgets
to depends on !BR2_STATIC_LIBS like BR2_PACKAGE_DTC does.
Fixes the following kconfig warning:
arning: (BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT && BR2_PACKAGE_KVMTOOL && BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT) selects BR2_PACKAGE_DTC which has unmet direct dependencies (!BR2_STATIC_LIBS)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 0d8158fc61. Thanks to
a fix in libaio, blktrace now builds fine on PowerPC, so there's no
reason to disable it anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both the blktrace and gadgetfs-test packages were failing to build on
PowerPC due to the mysterious:
hidden symbol `_rest32gpr_30_x' in libgcc.a(e500crtresx32gpr.o) is referenced by DSO
Due to this error, we disabled blktrace on PowerPC in commit
0d8158fc61. However, gadgetfs-test
continued to fail with the same error. As Romain Naour pointed out, the
problem seems in fact to come from a common dependency of blktrace and
gadgetfs-test: libaio. As Romain investigated, the problem started
appearing after the last bump of libaio, from version 0.3.109 to
0.3.110.
A quick bisect through the libaio changes between 0.3.109 and 0.3.110
has revealed that the problematic change is one in the libaio build
system, which now obeys to the CFLAGS provided in the environment,
rather than overriding them. So the CFLAGS provided by Buildroot cause
this problem. It turns out that the problematic CFLAGS is -Os, which is
indeed known to cause issues on PowerPC in some corner cases.
Even though it would probably be a better long-term solution to switch
to -O2 by default, and mark -Os as not available on PowerPC, it is a too
radical change so close to 2016.08. So we simply adjust the libaio
package so that it uses -O2 instead of -Os.
Fixes:
http://autobuild.buildroot.net/results/5e6cc4c432ce6c964ac285026978ad14d9eae97c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the ffmpeg code, libavutil/arm/asm.S makes some assumption about the
ARM architecture for which the code is built. Only ARMv4, ARMv5, ARMv6
and ARMv7-A is supported. Due to this, object files built out of
ARM-optimized assembly code have the wrong architecture information,
causing a failure at link time.
Adding ARMv7-M support would be possible, but it doesn't exist yet in
ffmpeg, and it's pretty unlikely that ffmpeg will ever be needed on an
ARMv7-M platform, so this commit takes the simple approach of disabling
ffmpeg for ARMv7-M.
Fixes:
http://autobuild.buildroot.net/results/ca4c67b093afd6f14349fcdc87b02e0480172e8c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing build issue related to MS_DIRSYNC and MS_RELATIME, we get
following build error with blackfin external toolchain.
fstest_monitor.c: In function 'main':
fstest_monitor.c:237: warning: implicit declaration of function 'fork'
/tmp/ccCzZIuW.o: In function 'main':
/home/rahul.bedarkar/buildroot/output/build/mtd-1.5.2/tests/fs-tests/utils/fstest_monitor.c:237: undefined reference to '_fork'
collect2: ld returned 1 exit status
make[2]: *** [fstest_monitor] Error 1
Since it uses fork(), add dependency on MMU support for integck.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libical requires time zone information in order to make use of time
zone functions (otherwise, segfaults occur when applications call
the time zone functions). This patch:
1. forces the system to build time zone info
2. ensures libical does not build its own time zone info (this is
the default behaviour, but the flag is added in case libical's
default changes in the future).
Signed-off-by: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Manuel in bug #9161, the commit
19b503b0d2 that bumped the X.org server
from 1.18.3 to 1.18.4 forgot to also rename the patch directory, making
the existing patch orphan, while it is still needed. This commit
therefore renames the 1.18.3 directory to 1.18.4.
Moreover, this patch is also needed for the 1.17.x X.org server series
which has been added recently, so this commit also adds the patch to a
new 1.17.4 directory.
Fixes bug #9161.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed with Waldemar, the C++ support for Blackfin is currently
broken, and we don't have a fix in sight for the 2016.08
release. Therefore, this commit disables C++ support entirely on the
Blackfin architecture in the internal toolchain backend.
This will avoid a significant number of Blackfin build failures, that
occur when building C++ packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When readline is static library, we need to link against ncurses,
it is because, dependent library's symbols are not resolved when
static library is built. Those symbols are resolved when binary tries
to link with static library.
We can't pass linker flags for ncurses by setting LIBS environment
variable via <PKG>_CONF_ENV because it looks like build system is not
taking that into account and even though it would have been, order of
linking is important.
We can't also pass linker flags for ncurses via --with-readline-libs
conf options because it causes lftp_LIB_READLINE macro to take readline
headers from host machine if available. To use --with-readline-libs
we need to set --with-readline=yes and --with-readline-inc to include
dir. But when --with-readline=yes, readline_prefix is computed based
on if headers can be found in /usr/local or /usr. If readline is
installed on host machine, then configure fails since we are using
headers for host machine. If headers are not found in /usr/local or /usr
then only path specified --with-readline-inc is taken into account.
So specifying linker flags for ncurses via --with-readline-libs will
not work in all cases.
So it looks like, updating linker flags directly is only option to fix
static link issue against readline.
Fixes:
http://autobuild.buildroot.net/results/ae9/ae93bd1b4f6e1ed8f386830d4a51f00d9466f267/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: update autoreconf comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When installation prefix is specified in "--with-readline" config
option, lftp's build systems figures out include dir and linker flags.
So don't specify --with-readline-{inc,libs} options which are anyways
get ignored by build system.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we limit installing zoneinfo to non-musl toolchain, by lack
of knowledge on how it would work on musl.
Turns out that musl uses the same zoneinfo format as glibc does.
Make it possible to install the TZ info whatever the C library; for
musl, use tzdata as for glibc.
Thanks Rich! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes several build issues of OpenBLAS on ARM:
- The first one occured on ARMv5 platforms, when the ARMV5 OpenBLAS
architecture is used. In this case, OpenBLAS build system forces
-march=armv5, which may not be correct for certain toolchains. As an
example, the Sourcery CodeBench toolchain has an ARMv4 and an ARMv5
sysroot. The ARMv5 sysroot is actually an armv5te sysroot, so when
OpenBLAS forces -march=armv5, gcc thinks it should use the ARMv4
sysroot, causing build failures.
To address this, a patch to completely remove the -march ARM CFLAGS
is added to OpenBLAS.
Fixes:
http://autobuild.buildroot.net/results/991497b12b70f948169e5ad99eebd0fe7f6209a2/
- The second one occured on ARMv7 platforms, when the ARMV7 OpenBLAS
architecture is used. The OpenBLAS code expects an EABIhf build, so a
dependency is added for EABIhf for both ARMv6 and ARMv7.
Fixes:
http://autobuild.buildroot.net/results/0ba0bee48a83367fcefab827e8eaa72f0c8fe90b/
- Once the previous ARMv7 problem has been fixed, it turns out that the
ARMv7 specific code in OpenBLAS contains VFPv3 specific
code. Therefore, the user *must* have choosen either VFPv3 or VFPv4,
or the code will not build. VFPv3-D16/VFPv4-D16 are not sufficient,
as more than 16 registers are used by the OpenBLAS code.
To address this, the ARMV7 platform of OpenBLAS is restricted to the
proper VFPv3/VFPv4 selection, and the ARMV6 platform is restricted to
the proper VFPv2 selection.
This problem was not visible in the autobuilders, as it was hidden by
the previous one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While musl and glibc provide the ucontext structure definition on all
architectures they support, it is not the case of uClibc. We have been
excluding more and more architectures over time, but this isn't really
nice as we continuously need to add more. Latest example: the fact that
ucontext on ARM is only available on ARM platforms that support the ARM
instruction set (i.e not on the Thumb-2 only Cortex-M platforms).
Therefore, we introduce a BR2_PACKAGE_LIBSIGSEGV_ARCH_SUPPORTS variable,
which:
- is set to 'y' for musl and glibc
- is set to 'y' for uClibc for the only architectures that are known to
provide ucontext (those are the ones that select ARCH_HAS_UCONTEXT in
uClibc.
Note that we remove the comment, as it would become a way too
complicated comment, and we usually don't add comment for such
complicated situations (see libunwind for a similar example).
Fixes:
http://autobuild.buildroot.net/results/b1e40b3ec64cd98b535d83e89e5780c46680e095/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dante configure script has some logic to remove the -g flag from
CFLAGS, but this logic is flawed and also removed -g in
-mfloat-gprs=double, turning it into the invalid -mfloatprs=double,
causing a build failure.
This commit adds a patch that gets rid of this -g removal logic, since
it is in fact unnecessary.
Fixes:
http://autobuild.buildroot.net/results/313370bf05efe7fd87c281a97ecb6e06531a87ed/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The procps-ng package currently fails to build on BR2_STATIC_LIBS=y
configurations. Indeed, by default NUMA support is enabled, and it
requires dlopen(). As hinted by the configure script, passing
--disable-numa allows to disable NUMA support.
However, once this is done, another issue pops up: dlopen() is also used
by the SELinux support. But even when SELinux support is disabled, the
procps-ng code incorrectly includes <dlfcn.h>. This is addressed by the
addition of a patch.
Fixes:
http://autobuild.buildroot.net/results/b385bf435085728aece6323a5006ba9fa6631744/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The webrtc-audio-processing configure script assumes that if the
host_cpu part of the tuple is "arm", then ARM instructions are
available. This is obviously incorrect for ARM Cortex-M platforms, which
only support the Thumb-2 instruction set.
In order to address this, we add a patch,
0001-configure.ac-fix-architecture-detection.patch, which changes how
webrtc-audio-processing detects the architecture: instead of relying on
the host_cpu part of the tuple, it relies on the built-in definitions of
the compiler.
Not only it fixes the Cortex-M detection, but it also enables ARMv7
optimizations on ARMv7-A: until now they were only enabled when the
host_cpu part of the tuple was armv7, which is never the case in
Buildroot.
However, once this issue is fixed for Cortex-M, the build nonetheless
fails later due to the usage of NPTL-only functions. So we change the
thread dependency to a NPTL dependency.
Fixes:
http://autobuild.buildroot.net/results/4933082cd7cc5781404c77ccef5c2b9333c5f714/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size-stats script fails when the usb_modeswitch_data is enabled,
because this package installs files that contain commas in their
name. However, the size-stats script also uses comma as a separator for
its CSV files, causing a "ValueError: too many values to unpack" in:
pkg, fpath = l.split(",")
Fix this by splitting only the two fields that need to be split.
The bug was reported by Matthias <porto.rio@gmx.net>, who also suggested
a fix.
Fixes bug #9136.
Reported-by: Matthias <porto.rio@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ALSA > 1.1.x are not determined correctly when configuring the library.
A patch, identical to the one used for Qt5, is added to the qt package
to solve this problem.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When uClibc-ng 1.0.17 was released, there was a regression when building
Thumb2-only for a CPU that is capable of running in arm mode (e.g. an
armv7a cpu).
We hastily added a patch to revert the upstream commit, as a stop-gap
measure, waiting for the actual fix.
That actual fix is there, now. :-)
Drop our revert-patch, and add the upstream patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iproute2 believes that it needs to link with libpthread for its arpd
binary, because "some db implementations require thread". Therefore, our
iproute2.mk explicitly disables the build of arpd when thread support is
not available.
However, the sed expression it uses no longer works. The Makefile used
to look like:
TARGETS = foo baz baz arpd foobar
so replacing " arpd " with a space was working fine. However, the
Makefile got changed in iproute2 to:
ifeq (... berkeleydb available ...)
TARGETS += arpd
endif
i.e, with no space at the end of the line. This made our sed expression
ineffective, causing build issues with no-thread configurations since
arpd was no longer disabled.
To address this, instead of sed-ing the Makefile, we overwrite the
berkeleydb detection of iproute2, by writing to the "Config" file, like
we're doing for other aspects of the package.
Fixes:
http://autobuild.buildroot.net/results/03a37a2372a4c2e438a073e015c49d9e554b86b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Traditionally, Buildroot has a default of enabling thread
support. However, with the current construct of the thread choice in the
uclibc package, the m68k and microblaze architecture end up with no
thread support as the default.
In order to avoid having to explicit a more complicated "default" value
for the choice, we take a simple approach: we order the 3 possible
choices by order of "preference", since Kconfig selects the first
selectable option in a choice by default.
So, NPTL is first and is the default when available. Then comes
linuxthreads which only gets selected as the default when NPTL is
available. None is offered as a last choice (in the current
implementation, it is never the default, since all architectures can
have thread support, either through NPTL or linuxthreads).
[Thomas: reworked according to Yann's comment that we could rely on the
Kconfig behavior that selects the first available choice option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_BLKTRACE option "depends on
BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS", but this architecture dependency was
not replicated in the Config.in comment. This commit fixes this
inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running ntp it randomly aborts at ntp-4.2.8p8/libntp/recvbuff.c:326
which seems to be a debugging feature. This patch just disables
debugging, it does not fix the root cause of the problem.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since enlightenment 0.20 uuid.h is always included in e_pixmap.c but
libuuid is checked at configure time only when wayland support is
enabled.
Include uuid.h must guarded by HAVE_WAYLAND.
Fixes:
CC src/bin/src_bin_enlightenment-e_pixmap.o
src/bin/e_pixmap.c:16:18: fatal error: uuid.h: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HLS plugin can be built with nettle or libgcrypt or openssl
cryptographic backend. But current dependency on gnutls is incorrect.
It has been working so far because gnutls depends on nettle.
gst-plugins-bad's build system for HLS allows user to choose which
cryptographic backend to use. If that is not specified, it internally
checks for nettle or libgcrypt or openssl in order. If none of the
cryptographic backend is available, HLS plugin gets disabled internally.
Select cryptographic backend according to which cryptographic packages
are available. If both libgcrypt or openssl are not available, choose
nettle by default.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
operf_utils.h defines rmb() for a limited number of architectures, so
add this list to BR2_PACKAGE_OPROFILE_ARCH_SUPPORTS to disable any new
or unsupported architectures.
Doing so, this disable oprofile for m68k which lack of memory barrier
operations.
Remove nios2 dependency since it's not supported by oprofile even if
binutils could be built for nios2.
Fixes:
http://autobuild.buildroot.net/results/1cc761d8a5715d0a2c6eaacfde7e44b225da1b36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: remove BR2_sh64, use BR2_sh instead of BR2_sh4.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imx6ul has currently an issue on kernel 4.7 that causes a stall when running
the "reboot" command.
This issue has been reported in the linux-arm-kernel mailing list, but we
don't have a proper fix at the moment.
This problem is not seen when SMP is disabled, so let's disable it for now
until a proper fix becomes available.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following reports from me of build failures of the GDB simulator for the
Blackfin architecture, Waldemar cooked a
patch (0005-fix-sim-compile.patch) that removes the typedef of SIM_CPU,
because there was a redefinition of this typedef for Blackfin. This was
not causing an issue with recent compilers as redefining the same
typedef is valid with recent compilers, but was causing build failures
with gcc 4.4.x.
However, by removing the common definition of SIM_CPU, this patch broke
the build of the GDB simulator on other architectures, which did not had
an architecture-specific redefinition of SIM_CPU (unlike Blackfin).
The crux of the problem is in a commit from Mike Frysinger, that tries
to refactor the SIM_CPU definition into a common one. Except that it
leaves a redefinition of it for Blackfin. Removing this second
definition however doesn't easily work, due to include ordering
issues. The easiest solution is to simply revert the patch from Mike
Frysinger. This allows to fix the build for all architectures and all
compiler versions.
Fixes:
http://autobuild.buildroot.net/results/3b82c44ee853fab0e0c63881f0705bb659412917/http://autobuild.buildroot.net/results/dafbb93ab38a4285ce42436219d552cceb14828b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the kernel headers in the toolchain don't provide __NR_getrandom,
eudev has a predefined set of values. However, the provided value for
ARM64 is incorrect, and causes a runtime problem on this architecture
when old kernel headers (not providing __NR_getrandom) are used.
This commit adds a patch to eudev to fix this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Two patches are removed, as they have been upstreamed:
- 130-fix_build_with_gcc-6.patch (svn commit 233721, Git commit
8c3fa311caa86f61b4e28d1563d1110b44340fb2)
- 920-libgcc-remove-unistd-header.patch (svn commit 226092, Git commit
e940d7953f06af11d09229a29ecbcc1ba25b378d)
All other patches have simply been refreshed, with no manual edit
needed.
A build+runtime test has been done with an ARM, Cortex-A8, EABIhf, musl
configuration, booted under Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of shellinabox with the musl C library,
which requires two changes:
- A patch to include <sys/ttydefaults.h>, which is needed to get the
definitions of TTYDEF_*
- A hack to workaround what seems to be a problem in musl itself (musl
does #define utmp utmpx, which causes some symbol conflicts down the
road). Since anyway the utmpx implementation is just a set of stubs
in musl, we simply make shellinabox believe that <utmpx.h> is not
available by passing the appropriate variable. The musl issue has
been reported at http://www.openwall.com/lists/musl/2016/08/04/8.
Fixes:
http://autobuild.buildroot.net/results/1847cab964957da3c9bf4911a5ad3602b3c82431/
Signed-off-by: Olivier Singla <olivier.singla@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5ca9b7cf66. Installing
dtc headers in $(HOST_DIR) causes some build failures of
host-uboot-tools due to a conflicting libfdt.h header.
The possible solution to solve this problem, based on -isystem, has been
reverted has it was causing too many issues that we didn't want to solve
so close to cutting 2016.08-rc1.
Since the headers of libfdt for the host are currently not needed for
any package in the Buildroot tree, it is easier and safer to just revert
this patch.
Fixes:
http://autobuild.buildroot.net/results/9fba77f4080bf6bc26e341f3f383cdba26c0e14f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The main benefit of using make foreach loops is that they will abort
if one of the iteration of the loop fails. The current for loops will
continue, and only report a failure if the last iteration was a
failure, but will silently ignore other errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This long list of commands to copy the terminfo files from staging to
target is really silly and can be factorized using a
NCURSES_TERMINFO_FILES variable, which is then iterated through.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adding the '-m4' device tree blobs which allow to disable the
peripherals that are used by the Cortex-M4.
The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled
u-boot variable is set to 1.
The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here:
https://github.com/boundarydevices/freertos-boundary
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
* imxv4l2videosrc:
* Stricter checks for video device capabilities
* Add support for more video formats like 8/16-bit grayscale
* pxp: Fix incorrect return code which broke blitter with GStreamer 1.8
* blitter:
* Improvements in error logging
* Fixes for RGBx framebuffer format detection
* Fix for subtle tearing problem by implementing triple buffering
* audio:
* Replace objdump-based scan during build configuration
Codec filenames are instead moved to the C code; the libdir
path of the libfslaudiocodec.pc file is used to know where on
the target the files are placed
* Explicitely add the libfslaudiocodec.pc libdir to the MP3 encoder
Fixes build errors in buildroot
* Minor logging fixes
* misc:
* Proper check for region copies in phys_mem_meta
* Add missing G_END_DECLS lines in headers
Tested with the following commands on i.MX6Q (IPU):
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxeglvivsink
Tested with the following commands on i.MX7 (PXP):
# gst-launch-1.0 imxv4l2videosrc device=/dev/video1 ! imxpxpvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, all the libraries are installed under /usr/lib/imx-mm
which causes problems at runtime.
[Peter: drop -mindepth/-maxdepth, add comment explaining why this is done]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, all the libraries are installed under /usr/lib/imx-mm
which causes problems at runtime.
The hooks are inspired from the mechanism used in the Yocto recipe:
https://github.com/Freescale/meta-fsl-arm/blob/krogoth/recipes-multimedia/imx-codec/imx-codec.inc
Tested with the following commands:
# gst-launch-0.10 audiotestsrc ! mfw_mp3encoder ! fakesink
# gst-launch-1.0 audiotestsrc ! imxmp3audioenc ! fakesink
[Peter: drop -mindepth/-maxdepth, add comment explaining why this is done]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The options to purge locales and to generate locale data are currently
located in the toolchain menu. However, these options are not really
related to the toolchain per-se, they are more system-level
configuration options, much like the timezone selection option we
already have in the "System configuration" menu.
Therefore, it makes more sense to have the locale-related options in
the "System configuration" menu as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current list of locales to keep by default is "C en_US de fr". It
doesn't make much sense to keep "de" and "fr" more than any other
language. So let's keep only the "C" and "en_US" locales by default,
and leave it to the user to specify other locales to keep if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current default is to keep all locales installed in
/usr/share/locale/. However, in practice, those locales take up a
significant amount of space, and most users do not need
locales. Therefore, it makes more sense to default to purging locales,
in order to keep only a few useful ones rather than keeping them all.
It helps in providing a small filesystem size by default, and still
allows advanced users who really need locales to tune their
configuration.
As an example, a very basic system with just util-linux enabled (not
even Busybox) weights 11 MB, including 6.4 MB of locales. With this new
default, the generated system is only 4.2 MB.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
- bump u-boot version to 2016.07
- "snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
Also we delete "snps_hs38_vdk_defconfig" as we doesn't support
uni-processor HS38 configuration for vdk any longer.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The output of "/etc/init.d/S40network start/stop" was lacking a
newline due to the usage of printf. Fix it by echoing the status, like
we do in other init scripts.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cairo package fails to build on some architectures:
BR2_TOOLCHAIN_HAS_LIBATOMIC is enabled, but libatomic is in fact not
available.
This happens because the gcc logic in libatomic/configure.tgt does not
recognize "uclinux" as a valid OS part of the target tuple, and
therefore it does not build libatomic.
The "uclinux" part of the tuple is used by Buildroot when
BR2_BINFMT_FLAT=y, so we make BR2_TOOLCHAIN_HAS_LIBATOMIC enabled only
if !BR2_BINFMT_FLAT.
It is worth mentioning that support for the uclinux tuple could most
likely very easily be added to gcc: it could rely on the generic
"posix" implementation of libatomic, which uses pthread locks,
available on all architectures where thread support is available.
Fixes:
[arm] http://autobuild.buildroot.net/results/3d8dc45e41a043d2c2c26bfb26c3617499fbe671
[m68k] http://autobuild.buildroot.net/results/318e01406e3e92eb589ee5b2231c671a4dbb6da4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust dependency after analysis of the gcc code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost-context module contains ARM assembly code, which uses ARM
instructions. Therefore, on Thumb-2 only platforms (such as Cortex-M),
the following build error occurs:
libs/context/src/asm/make_arm_aapcs_elf_gas.S: Assembler messages:
libs/context/src/asm/make_arm_aapcs_elf_gas.S:33: Error: unshifted register required -- `bic a1,a1,#15'
libs/context/src/asm/make_arm_aapcs_elf_gas.S:42: Error: immediate value out of range
To avoid this error, we make the boost-context module depend on
BR2_ARM_CPU_HAS_ARM.
Fixes:
http://autobuild.buildroot.net/results/8f6770b59a343b9f710e9363b43227ee9f026660
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: use BR2_ARM_CPU_HAS_ARM instead of a dependency on
!BR2_ARM_CPU_ARMV7M.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this new version, the generation of atom-glue fails with the
following error:
Making all in src/lib
make[3]: Entering directory '/mnt/data/src/sfl/zodiac/buildroot/output/build/lldpd-0.9.4/src/lib'
GEN atom-glue.c
arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
compilation terminated.
arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
compilation terminated.
make[3]: *** [Makefile:899: atom-glue.c] Error 1
There is an upstream patch pushed after 0.9.4 which fixes the
corresponding Makefile.am, included in this commit.
Note that since the provided tarball ships the related Makefile.in file,
we need to tell Buildroot to autoreconfigure the package.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Thomas: add comment about AUTORECONF=YES in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream i2c-tools executables are installed to /usr/sbin by default.
Make buildroot match this behavior.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before changing the install directory of i2c-tools to /usr/sbin/ make
sure busybox is built first (if selected) in order to ensure that the
symlinks to the busybox-provided versions are overwritten by the
i2c-tools' install commands.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has this patch a while and other projects are using
it already. So better switch to this.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of version 1.25.0 busybox by default includes a nearly complete
implementation of i2c-tools. Hide the upstream version unless the
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS option is selected.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng007 tag plus a
couple of fixes on top of it that will all make its way in the
next engineering build.
We hope this patch will cure most buildroot ARC failures as it
contains important fixes:
1) PIE fix. We have added PIE support to ARC toolchain at last.
So that should prevent breakage of many packages. As ARC now
supports PIE we remove ARC from BR2_TOOLCHAIN_SUPPORTS_PIE
exclusion in toolchain/Config.in file.
2) Assembler fix. This patch also have changes that fixes frequent
assembler failures, e.g.:
http://autobuild.buildroot.net/results/543/5430b902d900943a34c1888e7e410bd5df367bc2//
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: remove uClibc PIE patch, since we have bumped uClibc in the
mean time, to a version that contains the PIE fix for ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Security fixes and fixes for bugs introduced in 1.4.40.
Drop 0002-autobuild-clock_gettime-lrt-with-glibc-2.17.patch, which is now
upstream.
Due to the patch removal, autoreconf is no longer needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: remove autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many cleanups and ARC improvements including PIE support.
Patches included upstream and removed.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.
The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing the <bits/local_lim.h> issue by using <limits.h>, the
build still fail with udefined __WORDSIZE.
Adding <sys/user.h> to define __WORDSIZE reveal that xenomai use
<error.h> which is not provided by musl.
The discussion on the musl mailing list [1] about glibc error reporting
functions concluded to not add this support in the C library.
For now, disable Xenomai user space support for musl toolchains since
it require several patches to build correctly and needs to remove each
glibc error reporting functions.
Users interested in musl support for Xenomai can work with upstream to
fix these issues and revert this patch.
[1] http://www.openwall.com/lists/musl/2014/06/29/8
Fixes:
http://autobuild.buildroot.net/results/e36/e36a21c1df33bdd3fbc61d516a3e8f7c5f7c41af
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS to hold the
architectures than can build and use Xenomai on the target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide a more complete set of instructions on how to get Wifi
working on the warpboard.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
grub2 assumes the strip command will generate output and the output should
always be stripped - so, just use the $(TARGET_CROSS)strip to make sure that
the build succeeds regardless of the buildroot strip configuration.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iozone requires thread support since commit
06b53255cf, so having code to handle the
non-threaded case in the .mk file is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The autofs configure script verifies on the build system if /proc is
provided by a Linux system. This might fail if /proc is not mounted,
but does ont mean that procfs will not be available in the target.
Therefore, this commit adds a patch improving the AF_LINUX_PROCFS
autoconf macro to allow passing an autoconf cache variable. autofs.mk
then uses that to force the fact that /proc will be available on the
target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. It includes proper ps7_init_gpl.c/h
in it, so builds working SPL without any manual intervention.
BR2_TARGET_UBOOT_BOARD_NAME should be changed to zynq_zc706 since
U-Boot now has separate defconfig files for ZC702 and ZC706 boards.
BR2_TARGET_UBOOT_SPL_NAME should be changed to spl/boot.bin since
the Zynq image support for the mkimage tool was upstreamed and it
now generates boot.bin under spl/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline.
Commit 46d6a561be ("zedboard: Generate BOOT.BIN automatically")
switched from the Xilinx GitHub repository to the U-Boot mainline,
but this commit gets it back to the Xilinx GitHub repository for the
following reasons:
- This defconfig still relies on the Xilinx's local repository for
the kernel. The vendor does the best test for the combination of
U-Boot and the kernel with the same release tag (xilinx-v2016.2
in this case).
- At the time of commit 46d6a561be, the u-boot-xlnx still needed
manual copy of ps7_init(_gpl).c/h in order to build a working SPL
image. So, the mainline U-Boot had advantage in that point of
time. However, the improvement in the mainline U-Boot was merged
into the u-boot-xlnx at the xilinx-v2015.3 release. Now, the
mainline and the u-boot-xlnx are even in this point of view.
- The mainline U-Boot defaults to boot FIT, so something must be
done; either patch environments around with a local patch to
switch to uImage booting (current solution), or build an FIT
with a post build script (chromebook snow does this). On the
other hand, the Xilinx repository defaults to uImage booting,
so it is straightforward, and needs no addition care.
This commit does:
- Switch to the Xilinx custom git repository, and stick to the
xilinx-v2016.2 tag.
- Delete the local patch board/avnet/zedboard/uboot/0001...
since the Xilinx custom repository can boot uImage by default.
- Enable BR2_TARGET_UBOOT_FORMAT_IMG instead of ..._FORMAT_DTB_IMG
since all the Zynq boards in U-Boot enable CONFIG_OF_EMBED.
- Replace BR2_TARGET_UBOOT_ZYNQ_IMAGE with BR2_TARGET_UBOOT_SPL_NAME
since U-Boot can natively generate the Zynq boot image now. The
Zynq image support for mkimage tool was upstreamed at v2016.01
(so xilinx-v2016.1 as well), so no additional tool is needed
any more.
- Update readme.txt
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SSDP managing daemon.
Designed to work with miniupnpc, miniupnpd, minidlna, etc.
http://miniupnp.free.fr/
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- remove patch for _GNU_SOURCE, pass it from the .mk file instead
- add dependency on BR2_USE_MMU, fork() is used.
- rename $IF variable in init script/systemd unit file to $IFACE, for
clarity.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GUPnP Tools are free replacements of Intel UPnP tools that use
GUPnP. They provides client and server side tools which enable
one to easily test and debug one's UPnP devices and control
points.
http://www.gupnp.org/
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- use "depends on BR2_PACKAGE_LIBGTK3" instead of a select, and
simplify the Config.in comments consequently.
- move from "Development tools" to "Networking applications"
- license is GPLv2+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GtkSourceView is a portable C library that extends the
standard GTK+ framework for multiline text editing with
support for configurable syntax highlighting, unlimited
undo/redo, search and replace, a completion framework,
printing and other features typical of a source code editor.
https://projects.gnome.org/gtksourceview
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- simplify the Config.in by using "depends on BR2_PACKAGE_LIBGTK3"
instead of a select. It is pretty obvious that Gtk is needed if you
want to use gtksourceview.
- license is LGPLv2.1+, not LGPLv2+.
- change location in package/Config.in, gtksourceview is a library,
it should not go under "Development tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version B.02.17 was found to be unstable on recent HW.
Status of the patches:
- The patch allowing to add extra values to the LIBS variable has
been refreshed, and changed to a Git formatted patch.
- The two patches from git.alpinelinux.org were needed for lshw to
build with the musl C library, but they have been merged upstream
(commit cd690bff1516b40fecd5ec4a7f6619e5bffc3cf0).
- The last patch was taken from upstream, and therefore already
merged, and now part of B.02.18.
This patch was tested with kernel 4.4.16.
Signed-off-by: Hubert Sokolowski <hubert.sokolowski@intel.com>
[Thomas:
- better explanation about patches
- re-add patch from Gustavo about LIBS, since it is really needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iperf2 is a fork of the original unmaintained iperf project, that
continues the development of the iperf 2.x series. Update homepage
link, and download location.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Thomas:
- change the download location to use downloads.sourceforge.net
- turn the patch into a Git-formatted one, since upstream uses Git as
its version control system
- as noticed by Khem Raj, a C99 compiler is needed for the bool type,
so added AC_PROG_CC_C99 to configure.ac, and consequently added
IPERF_AUTORECONF = YES.
- removed two <pkg>_CONF_ENV variables related to the bool type, they
were added by an older commit
e13ac0ec87 back when we had a
config.cache shared between packages (which is no longer the case
today)]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selecting the driver CONFIG_BRCMFMAC as built-in causes some probe issues
as we cannot guarantee that the brcmfmac driver will be probed after the
rootfs has been mounted. The brcmfmac driver retrieves the firmware and
nvram file from the rootfs, so the rootfs should be mounted first.
To avoid such issues let the CONFIG_BRCMFMAC be built as module, which is
the original option in imx_v6_v7_defconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
squashfs-tools development has been moved to git.kernel.org from
Sourceforge.
The hash was selected to fix a threading issue observed when
creating images on a build machine with at least 64 cores.
(Fixes random corrupted images that would fail to boot)
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: use https:// instead of git://.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
KMS++ is a suite of library and test tools to interact with KMS drivers in
the linux kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[Thomas:
- rename prompt to kms++, suggested by Yann E. Morin
- fixup the thread dependency comment
- remove the mention of the python wrapper in the Config.in help
text, since they are not installed
- fix the Config.in comment to mention the C++ and gcc >= 4.8
dependencies
- use = instead of += when appropriate
- use a loop to install the test programs
- use a loop to install the libraries
- add installation to staging as well, both the libraries and header
files
- add missing dependency on host-pkgconf
- add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wavemon is an ncurse-based wireless device monitoring application allowing to
watch signal and noise levels, packet statistics, device configuration and
network parameters of wireless network hardware.
[Peter: needs host-pkgconf, explain CC override]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have introduced the support for ARM no-MMU in Buildroot,
we need to update the dependencies of the musl external toolchain. It
supports only MMU-capable ARM cores, so it must depend on BR2_USE_MMU,
at least for the ARM platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARM big-endian is different from ARMv4/5/6 and ARMv7. Big-endian on
ARMv4/5/6 is BE-32 while big-endian on ARMv7 is BE-8, which are not
compatible.
Therefore, the musl big endian toolchain that is built for ARMv4
cannot work for ARMv7, it can only work for ARMv4/5/6.
This commit updates the musl toolchain dependency accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "--no-patch" option used by the git downloader appeared on git
1.8.4. Systems with older git versions show an error and fall back to
the wget downloader, which isn't suitable for all the cases.
Signed-off-by: Enrique Ocaña González <eocanha@igalia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Docker is a platform to build, ship, and run applications in portable
containers.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: drop LIBRARY_PATH, as suggested by Christian.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other packages when building against btrfs-progs require headers in the
staging directory under /usr/include/btrfs. This patch enables
installing btrfs-progs to the staging directory to enable other packages
to build against the btrfs-progs headers.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: take into account the BR2_STATIC_LIBS case, by adding the
relevant BTRFS_PROGS_INSTALL_STAGING_OPTS variable, as well as a patch
to make sure "install-static" installs the static library and the
headers.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.7 2.6.0 YES OK (3)
arm_versatile 4.7 2.5.0 YES OK
arm_vexpress 4.7 2.5.0 YES OK
m68k_mcf5208 4.7 2.5.0 YES OK
m68k_q800 4.7 q800-v2.4.0 NO (2) OK
microblazebe 4.7 2.5.0 YES OK
microblazeel 4.7 2.5.0 YES OK
mips32r2el_malta 4.7 2.5.0 YES OK
mips32r2_malta 4.7 2.5.0 YES OK
mips32r6el_malta 4.7 2.6.0 YES OK (3)
mips32r6_malta 4.7 2.6.0 YES OK (3)
mips64el_malta 4.7 2.5.0 YES OK
mips64_malta 4.7 2.5.0 YES OK
mips64r6el_malta 4.7 2.6.0 YES OK (3)
mips64r6_malta 4.7 2.6.0 YES OK (3)
ppc_g3beige 4.7 2.5.0 YES OK
ppc_mpc8544ds 4.7 2.5.0 YES OK
ppc_virtex_ml507 4.7 2.5.0 NO OK
ppc64_pseries 4.7 2.5.0 YES OK
sh4 4.7 2.5.0 YES OK
sh4eb 4.7 2.5.0 NO (1) OK
sparc_ss10 4.7 2.5.0 YES OK
sparc64_sun4u 4.7 2.5.0 YES OK
sparc_sun4u 4.7 2.5.0 YES OK
x86 4.7 2.5.0 YES OK
x86_64 4.7 2.5.0 YES OK
xtensa_lx60 4.7 2.6.0 YES OK
xtensa_lx60_nommu 4.7 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libarchive builds three commandline utilities: bsdtar, bsdcpio, and
bsdcat. This change adds control over the third utility to the list of
configuration options.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One of the "features" of a2x is that the '-r|--resource' flag imports
resources relative to the [SOURCE_FILE], not the CWD. The current
implementation tries to import resources from the destination dir $(@D),
which works fine for out-of-tree builds because $(@D) is an absolute
path, however in-tree builds treat $(@D) as a relative path, which breaks
because a2x treats $(@D) relative to SOURCE_FILE.
Use the make command $(abspath names...) to convert the dest dir to an
absolute path before passing it as a resource.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Atul Singh Mandla <atul.singh.mandla@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently warpboard uses a 4.0.5 kernel version from github.
Move to version 4.4.15, which is a long term supported kernel version.
With 4.4.15 we no longer need the extra two kernel patches as they have
already been upstreamed.
Use a linux fragment file, so that wireless can be functional by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generate an sdcard.img image to make it easier the deployment of a
Buildroot image.
[Peter: drop unneeded exit statement in post-image script]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ipkg dates back to the early 2000s when Compaq started the handhelds.org
project, it hasn't seen development since 2006, got forked as opkg a decade
ago and is starting to cause autobuilder issues, so mark it as deprecated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fbset is used by one of the init scripts, so we need it as a runtime
dependency.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
PowerPC FSI Debugger, for low level debugging of a Power8 CPU over FSI.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[Thomas:
- add to package/Config.in
- add hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dtc package currently does not install libfdt for the host install.
It can be useful to have libfdt on the host, such as for building QEMU
with the --enable-fdt configure switch.
Signed-off-by: David Raeman <draeman@bbn.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CFLAGS includes a search path for HOST_DIR/usr/include using -I.
When HOST_CFLAGS is used by a package, these flags are passed to the
compiler ahead of flags passed by the package's internal make system.
If a package has a header file with the same name as a header file in
HOST_DIR, this causes the toolchain to prefer the file from the system
include directory because its -I appears first on the command
line. Conflicts should prefer the file provided by the package. This
can be accomplished by using -isystem, which is more appropriate then
-I for system-level include paths.
Real-world example: libfdt might be installed in HOST_DIR to install a
patched version of QEMU that does not bundle libfdt. Meanwhile, the
u-boot package provides its own copy of libfdt.h that is modified from
upstream. If libfdt is also installed into HOST_DIR, then
host-uboot-tools fails to build because it grabs the libfdt.h from the
HOST_DIR area instead of using the patched version from its own source
tree. This patch corrects this issue.
This assumes the -isystem flag is supported by the host compiler,
which is the case since gcc 3.0 at least.
Signed-off-by: David Raeman <draeman@bbn.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Concise Binary Object Representation (CBOR) Library
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- use lower-case letters in the Config.in option prompt
- remove BR2_PACKAGE_TINYCBOR_JSON2CBOR sub-option, simply rely on
the cjson package being enabled
- pass prefix=/usr only at install time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports a patch from upstream grub2 that fixes a build
issue occuring at least with recent gcc versions:
gettext/gettext.c:37:36: error: storage size of 'main_context' isn't known
static struct grub_gettext_context main_context, secondary_context;
Fixes bug #8991.
Bug reproduced with:
BR2_x86_64=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_GCC_VERSION_6_X=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
BR2_TARGET_GRUB2_BUILTIN_MODULES="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop terminal"
and verified fixed after adding this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libsepol uses cdefs.h which is a internal glibc header.
This header is not intended to be used by any program and will cause
compiling against musl (and possibly other c libraries) to fail.
This patch fixed this issue and replaces all references of
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since efl update to 1.15 version, the efl package is a "real"
Buildroot package. It doesn't contain any subdirectories anymore.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #9091, the U-Boot environment we provide for the
Microzed and Zedboard platforms loads the ramdisk at 0x2000000 and the
DT at 0x3000000. This means that a large enough ramdisk overwrites the
DT. It makes more sense to load the DT at 0x2000000 and the ramdisk at
0x3000000.
Reported-by: Michael Monaghan <michaellmonaghan@gmail.com>
Tested-by: Michael Monaghan <michaellmonaghan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- restrict to EABIhf for ARM, since the libraries are pre-built for
this ABI
- add comment about the glibc dependency
- indicate odroid-scripts is a runtime dependency
- remove fbset dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with gdb 7.11, the bundled gnulib want to use rpl_gettimeofday
(gettimeofday replacement) due bad guessing when cross-compiling with musl
and uClibc toolchains. Instead of patching gnulib configure script to fix
the test, use gl_cv_func_gettimeofday_clobber=no to not use rpl_gettimeofday.
Thanks to Thomas Petazzoni to suggest this patch.
Reported upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=19798
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When built statically, runc try to link against Scrt1.o which is not
provided by uClibc ARM toolchain for static build only.
[...]arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find Scrt1.o: No such file or directory
collect2: error: ld returned 1 exit status
On ARM, Go forces the use of -pie, for some reason:
pie := (goarch == "arm" && goos == "linux") || goos == "android"
if pie { // we need to use -pie for Linux/ARM to get accurate imported sym
cgoLDFLAGS = append(cgoLDFLAGS, "-pie")
}
For this reason, add a dependency on BR2_TOOLCHAIN_SUPPORTS_PIE for ARM
CPUs to disable Go for such toolchains.
While at it, rewrap Go dependencies.
[1] http://lists.busybox.net/pipermail/buildroot/2016-July/167206.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Christian Stewart <christian@paral.in>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc-ng does not support PIE for some architectures as
arc and m68k. It isn't implemented in the static linking case, too.
With musl toolchains you might have static PIE support with little
patching of gcc. Static linking for GNU libc isn't enabled in
buildroot. Fixup any package using special treatment of PIE.
(grep -ir pie package/*/*.mk)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: use positive logic.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the SGX demos from Imagination Technologies, they are
available as binaries only.
This package contains binaries compiled for the SGX graphics accelerator used
in the following Texas Instruments SoCs: AM335x, AM437x, AM4430, AM5430.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- fix disablehpd bug (thanks to Thomas for spotting it.)
- change default HDMI mode to 1080p60hz.
- add support for HDMI HotPlug Detection control.
- add support for mason timer.
- add support for headless boot
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the pinned docker-containerd version to the latest in advance
of the introduction of docker-engine v1.12.0-rc4.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is The Linux UPnP Internet Gateway Device 2. It is
modified from the original Linux UPnP Internet Gateway Device
[http://linux-igd.sourceforge.net/] according to UPnP
InternetGatewayDevice:2 specifications.
It implements the UPnP Internet Gateway Device version 2
specification (IGDv2) and allows UPnP aware clients, such as
MSN Messenger, Azureus or Miranda to work properly from behind
a NAT firewall.
Please edit /etc/upnpd.conf before using upnpd!
https://github.com/ffontaine/igd2-for-linux
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- fix license, it's BSD-2c, not just "BSD"
- add dependency on host-pkgconf]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If those flags are not explicitly passed, the sdl2_ttf configure script
will include -I/usr/include and -L/usr/lib in the compile flags, which
are obviously unsafe for cross-compilation.
"checking for X... libraries /usr/lib, headers /usr/include"
Fixes:
http://autobuild.buildroot.net/results/f968fb31e9882cc856296a7c729d93e345e9e861
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- don't pass an argument to --with-x
- use --without-x instead of --with-x=no]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switching to the rtl8821au fork at github.com/abperiasamy/rtl8812AU_8821AU_linux.
- The current fork we are using is maintained by 1 person.
- The current fork does not work, and there are no plans to fix this:
- https://github.com/ulli-kroll/rtl8821au/issues/5
- https://github.com/ulli-kroll/rtl8821au/issues/6
- In practice, the current fork has numerous instability issues.
- Our lab switched to the abperiasamy fork a couple months ago and have been very happy with it.
- The contributor list for the abperiasamy fork contains 21 well-known individuals in the community.
- The raspberry pi community recommends the abperiasamy fork and uses it extensively.
- Firmware blobs are not necessary with the new fork.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If asciidoc and xmlto are around it will automatically enable the
documentation build which is pointless.
Build time on i5-3330 with docs = 37s, without docs 25s.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove check for the ser2net binary
- add check for the configuration file
- use 'printf' instead of 'echo -n'
- fix indentation where needed]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig file for at91bootstrap was false:
s/sama5d4_xplainedsnf_uboot_secure/sama5d4_xplainednf_uboot_secure.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the gamin package, patch
0003-fix-missing-PTHREAD_MUTEX_RECURSIVE_NP.patch was introduced to fix
the build with musl. Indeed, while musl defines "linux", it does not
define PTHREAD_MUTEX_RECURSIVE_NP, but only PTHREAD_MUTEX_RECURSIVE. So
the check was simplified to only verify if PTHREAD_MUTEX_RECURSIVE_NP is
defined.
However, this doesn't work well with uClibc linuxthreads. In uClibc,
PTHREAD_MUTEX_RECURSIVE_NP and PTHREAD_MUTEX_RECURSIVE are not
pre-processor defines, but enum values. For this reason, even if
PTHREAD_MUTEX_RECURSIVE_NP actually exists, #if
defined(PTHREAD_MUTEX_RECURSIVE_NP) is false. So, the gamin code falls
back to using PTHREAD_MUTEX_RECURSIVE.
Except that for uClibc linuxthreads, PTHREAD_MUTEX_RECURSIVE is defined
only if __USE_UNIX98 is defined. For the NPTL implementation,
PTHREAD_MUTEX_RECURSIVE is defined either if __USE_UNIX98 or
__USE_XOPEN2K8 are defined. This strange difference has been reported to
uClibc-ng upstream [1].
However, regardless of this uClibc behavior, using #if defined to check
for the availability of PTHREAD_MUTEX_RECURSIVE_NP is not good. This
commit therefore switches to using a proper AC_CHECK_DECL() autoconf
test, which works regardless of whether the value is #define'd or
defined as an enum value.
This fixes the build of gamin on linuxthreads platforms, such as
Microblaze or m68k.
Fixes:
http://autobuild.buildroot.net/results/887df97196d7777efbf18a7bee91aa45c1a98700/ (Microblaze)
http://autobuild.buildroot.net/results/eb4389474e1b30b5c395a07a857da13a66763bdb/ (m68k)
[1] http://mailman.uclibc-ng.org/pipermail/devel/2016-July/001087.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efl package has zlib in its dependencies, but does not select it,
which causes a dependency check error with the following defconfig:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2016.05-1162-g94c7298.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_EFL=y
This commit fixes this by selecting the zlib package at the Config.in
level.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Eolian languages bindings needs C++11, so we needs at least a gcc 4.8
for the host and target variant.
The C++11 support with gcc 4.7 is not sufficient.
Build eolian_cxx for the host only if Eolian support for the target is
selected.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fix misc typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AllJoyn Base Services are common services used by many devices,
providing a set of interfaces for different devices to interact and
interoperate with one another.
Thin Client Library is designed to bring the benefits of the AllJoyn
distributed programming environment to embedded systems.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AllJoyn framework defines a common way for devices and apps to
communicate with one another regardless of brands, categories,
transports, and OSes. Developers write applications that discover
nearby devices, and communicate with each other directly and through
the cloud, unleashing new possibilities in the Internet of Things.
AllJoyn Thin Core Library (AJTCL) is designed to bring the benefits
of the AllJoyn distributed programming environment to embedded
systems.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AllJoyn Base Services are common services used by many devices,
providing a set of interfaces for different devices to interact and
interoperate with one another.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Add dependency on BR2_TOOLCHAIN_HAS_SYNC_4, inherited from the
alljoyn package.
- select BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL when neither
BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION nor
BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING are selected. This ensures that
the package will at least build and install one thing.
- rename the Config.in option prompts from "alljoyn-<foo>" to just
"<foo>"
- rework the build command to use a loop rather than duplicate code
- rework the install command to also use a loop, and to not discard
errors.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle setting the
hostname and the issue file in there. A user using a custom skeleton
should be fully responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle network
settings in there. A user using a custom skeleton should be fully
responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the following commits, we'll be switching more options to be
conditional on the default or custom skeleton.
So, it makes sense that those options come after the choice of a
skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Being custom means that our default one is not suitable to start with.
So there is no reason to offer it as the default path.
Add a check that it is not empty.
Add a separating empty line, for good measure, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is a bit special. When Busybox is
enabled, it is a Busybox option. When Busybox is not enabled, it is a
stand-alone option, forcibly enabled.
So we can safely 'select' it without ensuring (via a 'depends on' or
another 'select') that Busybox is enabled.
However, the name of this option does not express the fact that it is
safe to select it without checking Busybox, which can lead to a bit of
time-consuming head-scratching.
To avoid future puzzlement from an unsuspecting observer, add a a big
fat comment that this option can be selected without any dependency on
Busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: slightly improve the wording of one of the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fcgiwrap was not updated since April 2015, but the last GitHub release
is from February 2013. Therefore, bump fcgiwrap to the latest commit
as it features fixes and improvements, but is unlikely to be part of a
release soon.
Update as well:
* the license file (latest commit features a COPYING file),
* the Config.in URL, as the previous "official" URL now returns an
HTTP 502 error.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove patch
0001-Add-configure-option-to-disable-documentation.patch as this is
now include in the new version.
- Add dependency on gettext when needed, since it uses libintl if
gettext functionality is not provided by the C library.
- Keep autoreconf/gettextize, which are needed for the link against
libintl to work properly.
Signed-off-by: Roland Franke <fli4l@franke-prem.de>
[Thomas:
- add dependency on gettext when needed
- add comment about why autoreconf/gettextize are kept
- cleanup commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In a Buildroot configuration with mysql enabled it might be useful to
be able to build Kodi without mysql support because Kodi may not need
it at runtime.
Kodi can store its internal databases not only locally using sqlite
but also on a mysql server, this allows several local Kodi machines to
share the same databases. When using only one Kodi instance, mysql
support is not needed, and not building mysql support helps reducing
build time.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of the times this is not needed because libdrm & mesa3d already
pull in the dependency to udev. Let's add it anyway to make sure that
udev is really used and to document that Kodi makes use of udev.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use one package per line to ease review of Kodi 17 version bump, where
10+ packages will be removed. This patch contains no code changes.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch can be removed when Kodi 17.0-Krypton is released because
cximage was removed in the git master branch.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ti-gfx package supports a set of SGX implementations which are
used in some TI SoCs, newer parts are not supported by this package.
This patch adds a list of supported TI SoCs to the help text.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: update with the new name of packages: ti-sgx-{km,um}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
refpolicy requires host-libsemanage. host-libsemanage will fail to
compile without host-audit. This commit adds host-audit as a
requirement for host-libsemanage.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-libsemanage requires host-audit to compile, therefore this patch
adds a host variant for the audit package.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: remove libcap-ng usage for now, rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it will install $(TARGET_DIR)/etc/rc.d/init.d/messagebus when
building on a redhat/fedora host.
Regardless of that we provide our own initscript.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the userspace libraries for the SGX graphics
accelerator of the following Texas Instruments SoCs: AM335x, AM437x,
AM4430, AM5430 It also adds a config file for the libraries and a
System-V init script.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas:
- Add Config.in comment about the ti-sgx-km dependency.
- Add dependency on glibc since the package consists of pre-built
libraries that can only work with glibc.
- Add Config.in comment about thread and glibc dependencies
- Use tabs for indentation everywhere.
- Use git:// instead of http:// to clone, since http:// doesn't work.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the kernel module for the SGX graphics accelerator of the
following Texas Instuments SoCs: AM335x, AM437x, AM4430, AM5430
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas:
- Add Config.in comment about Linux kernel dependency
- Extend Config.in help text to indicate that a TI specific kernel is
needed
- Fetch using git:// since fetching from http://, since fetching over
http:// doesn't work.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rt-tests doesn't build with some "old" toolchains due to missing local
syscall number definition for the new kernel deadline scheduler on some
architectures. Upsteam added __NR_sched_setattr and __NR_sched_setattr
definition only for common architectures (x86, x86_64, arm) and tile if
not already defined [1].
Instead of adding missing syscall number, avoid building rt-tests
with toolchain compiled with too old kernel headers (i.e
!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14)
At runtime, a 3.14 kernel must be used otherwise these syscall are not
available.
[1]
ef2dee4232
Fixes:
http://autobuild.buildroot.net/results/6fa/6facaeb10588bdf3ff029b882a8ae6ffba815cdc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- use the AML_LIBS_STAGING_DIR variable instead of PREFIX/M_PREFIX to
indicate the compiler sysroot, which allows to use a foreach loop
in the build commands.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The X11 package builds the "mcookie" executable, when selected, into
the directory output/host/usr/bin/mcookie. The xapp_init's "configure"
attempts to find the "mcookie" executable using the host's path. If
the host has an installed "mcookie" application in their /bin folder,
it can influence the build. The following patch forces the expected
mcookie location.
Related:
http://thread.gmane.org/gmane.comp.lib.uclibc.buildroot/50310
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- remove conditional on the mcookie package being enabled, since
xapp_xinit depends on the X.org server, and the X.org server
selects mcookie.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash for amd-gpu-bin-mx51-11.09.01.bin (the framebuffer variant of
the driver).
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the font size of the Mind block the same as all other blocks (it
was smaller) and re-adjust the min height of all blocks so that they
look the same.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google and Mind are already credited in the "Past Sponsors" section
for their contribution to the FOSDEM 2016 meeting.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mtd tests have proven very useful in testing both flash stability
and JFFS2 changes. Adding an option to install the integrity test.
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: rename Config.in option, misc improvements in .mk file, add
patch to fix build with uClibc/musl.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This MBR routine is based on TS' original bootloader. It is loaded by
the bootrom stored in the companion FPGA, and chainloads an executable
located at the beginning of the first non-fs (0xda) partition.
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
[Thomas:
- add hash file.
- install image in INSTALL_IMAGES_CMDS instead of
INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Naxsi is a third party nginx module reads a small subset of simple rules
containing a list of known patterns involved in website vulnerabilities.
This module behaves like a DROP-by-default firewall for nginx.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- include Config.in file directly from package/Config.in and not from
package/nginx/Config.
- improve Config.in help text with more details
- rename the package prompt from ngx_http_naxsi_module to nginx-naxsi
- remove NGINX_NAXSI_SOURCE, and fix the definition of
NGINX_NAXSI_SITE
- change license from GPLv3 to GPLv2+ with OpenSSL exception
- cange license file from LICENSE to naxsi_src/naxsi_json.c. The
LICENSE file exists in the latest Git master of the project, but
not in the 0.54 tag that we're packaging.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A module for nginx web server for handling file uploads using
multipart/form-data encoding (RFC 1867).
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename from nginx-upload-module to nginx-upload. Indeed, we don't
want all nginx modules to be suffixed with "-module"
- include the module Config.in file directly from package/Config.in,
like we do for Python, Perl, Lua or TCL modules.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Removed 0001-lib-gen_tables.c-define-EHWPOISON-when-not-available.patch
as this was applied upstream.
- Removed 0002-Fix-usage-of-audit_status.feature_bitmap.patch as this was
applied upstream.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgudev indeed used to be provided directly by eudev, but it's no
longer the case since eudev 3.1.3, and this has been already taken
into account in Buildroot in commit
6cfa5de33e. We simply forgot to update
the comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-libkmod does not exist, but there's --enable-kmod.
Also, add --enable-blkid to the list of options, since we already depend
on it (from util-linux).
Also do not align \ for line continuations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a recent update in the code, CONFIG_RTL8821AU=m is the expected
kernel configuration environment variable to be set, not
CONFIG_RTL8812AU_8821AU=m as was previously set.
Presently the package does effectively nothing.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When atomic intrisics are missing, libfastjson falls back to using
pthread mutexes to manage atomicity. Of course, this is much less
efficient than atomics, but it does the job.
Propagate the new dependency to rsyslog, the sole user of libfastjson.
Note: rsyslog already depends on threads for itself, but we believe it
is better to have the exact same dependency propagated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libfastjson is supposed to use the __sync_*4 atomic intrinsics, but alas
it is not using them because their ./configure decides they are not
available: it uses AC_TRY_RUN to check for them, and the default is to
decide they are not available, because of cross-compilation.
Besides, one of the source files was not including the generated
config.h, so even after fixing ./configure there was still a build
error.
The first patch is a backport from upstream to fix the missing
inclusion.
The second patch is switching AC_TRY_RUN over to AC_LINK_IFELSE, as the
only thing we're interested in is to check for the presence of the
atomic intrisics, and linking is enough for that.
Fixes:
http://autobuild.buildroot.org/results/192/1923d0b570adba494f83747a9610ea6ec35f5223/http://autobuild.buildroot.org/results/23a/23ac0e742ed3a70ae4d038f8c9eadc23e708f671/
and many others...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- point <pkg>_LICENSE_FILES to a file that actually exists
- add host-pkgconf to the dependencies
- remove unneeded CONF_OPTS options
- pass FREETYPE_CONFIG in the environment to point to freetype-config]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- remove all sub-options to select the various image formats. Between
no formats enabled and all formats enabled, the size difference of
the library is ~30 KB, so it really isn't worth having all those
sub-options:
-rwxr-xr-x 1 thomas thomas 22444 juil. 15 15:51 libSDL2_image-2.0.so.0.0.1
-rwxr-xr-x 1 thomas thomas 59216 juil. 15 15:52 libSDL2_image-2.0.so.0.0.1
consequently, we simply enable unconditionally all image formats
that don't have any dependency, and use "automatic" dependencies
for the 4 formats that require an external library
- remove the host package variant, as it isn't used anywhere.
- remove --with-sdl2-prefix and --with-sdl2-exec-prefix, and instead
add a dependency on host-pkgconf so that pkg-config is used
- remove --disable-static, this is handled by the autotools-package
infrastructure already
- point <pkg>_LICENSE_FILES to an existing file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- Rewrap Config.in help text.
- Remove unused SDL2_GFX_VERSION_MAJOR variable
- Add host-pkgconf to the dependencies, since pkg-config is used to
find sdl2. This fixes the build, otherwise -I/usr/include/sdl2 was
added to the CFLAGS when sdl2-config was found on the host machine.
- Remove --with-sdl2-prefix, since this option doesn't exist, and
using pkg-config is a better solution (--with-sdl-prefix exists,
but is not useful when pkg-config is available).
- Remove --enable-static, packages are not supposed to pass such an
option, it's not automatically by the autotools package
infrastructure.
- Pass --disable-sdltest instead of --disable-sdl2test since the
latter doesn't exist, while the former does.
- Pass SDL2_GFX_AUTORECONF = YES since the configure/Makefile.in are
not up-to-date and therefore it tries to use aclocal at build time.
- Adjust _LICENSE_FILES, since there is no file named 'LICENSE', use
the smallest source file instead, since it contains the license
text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some old binary blobs drivers only implement an old VIDEODRV ABI. This
is the case for the AMD Catalyst driver for example.
Such a situation already exists with the nvidia-tegra23, that only
support the VIDEODRV ABI 14.
Since VIDEODRV ABIs are not backward compatible [0], lets introduce an
older Xserver version that supports such an old ABI.
0. https://www.x.org/wiki/XorgModuleABIVersions/
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cyclictest program doesn't build with musl toolchains due to
several issues with a different implementation of the "struct sigevent"
from Glibc/uClibc and musl (similar to [1]).
The pi_stress program doesn't build with musl toolchains with the
following error since musl doesn't provide _POSIX_THREAD_PRIO_INHERIT
define even if musl have Priority Inheritance mutexes [2]:
src/pi_tests/pi_stress.c:78:2: error: #error "Can't run this test without PI Mutex support"
#error "Can't run this test without PI Mutex support"
Since the fix for cyclictest is not trivial, disable rt-tests for musl
toolchains.
Fixes:
http://autobuild.buildroot.net/results/c27/c272ef7df6190cbb688e6db0b1ee210e6fbb472c
[1] https://bugs.mysql.com/bug.php?id=80322
[2] http://www.openwall.com/lists/musl/2016/03/18/6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Remove fetching upstream patch to fix build without MTD support
* Update .config
* Update help text as SSL support is now needed for other features
than the webserver too
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit b6ff742ca0.
This bump causes numerous build failures, so Vicente and Yann proposed
to revert it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
GNUTLS-SA-2016-2 - vulnerability that affects certificate verification
when GnuTLS is used in combination with the p11-kit trust module.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This engineering build fixes the kernel dwarf stack unwinder feature for
ARC targets.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Related to:
4520524ba0
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
syslog-ng is built with the default buildroot flag localstatdir=/var
This causes three issues:
1) syslog-ng creates two files (syslog-ng.ctl and syslog-ng.persist in /var)
which shouldn't have random files generated in it.
2) SELinux expects it in it's default directory /var/run.
3) This breakes read only file systems because /var/ usually isn't mounted as
a seperate filing system.
Setting the buildflag to the default /var/run
fixes all three of thee of these issues.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- drop 0001-native-affinity.patch as it was replaced upstream [1]. Autoreconf
could be dropped
- drop conf env ac_cv_file__proc_stat=yes ac_cv_file__proc_meminfo=yes because
these tests no longer run when cross-compiling [2]
- upstream created a custom check function to use ncurses*-config [3] but it
does not allow to override the path to ncurses*-config, leading to a build
failure as the htop build system would search the path of host tools.
A new patch 0001-Allow-to-override-ncurses-config-path.patch allows this
override [4]. It brings back the need to autoreconf
- set path to ncurses5-config in conf env in order to avoid the htop build
system finding it in the path of host tools
[1] dfad0afb36
[2] b561956637
[3] 96c929f82b
[4] 666f12f60f
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prompt of all host packages is "host foo", except for imx-usb-loader
that uses "host-foo", and more precisely "host-imx-usb loader", which is
really weird. This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
[Thomas:
- Rename prompt from "host-mxsldr" to "host mxsldr".
- Add BR2_armeb in the list of architectures under which this package
can be enabled.
- Remove double quotes around the _SITE value.
- The license is GPLv2+, not GPLv2.
- Add a value for the _LICENSE_FILES variable
- Rename MXSLDR_DEPENDENCIES to HOST_MXSLDR_DEPENDENCIES, since the
dependencies of the host package are no longer derived from the
dependencies of the target package.
- Remove the MXSLDR_MAKE_OPTS variable that contained the PKG_CONFIG
variable definition: it is already passed in HOST_CONFIGURE_OPTS.
- Remove hash file, as it is not checked on Git packages for now.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We include a file containing cached values for Fortran tests that are
performed at the configure step. These tests fail when cross-compiling
and this is known upstream. See:
https://www.open-mpi.org/community/lists/users/2013/01/21186.php
In that thread the upstream maintainer admits that "cross compiling
OpenMPI is a known issue" and the way to workaround this is to
"pre-populate configure's answers to the Fortran tests (so that it
doesn't actually have to run anything)"
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: use a config cache.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We include a file containing cached values for Fortran tests that are
performed at the configure step. These tests fail when cross-compiling
and this is known upstream. See:
https://www.open-mpi.org/community/lists/users/2013/01/21186.php
In that thread the upstream maintainer admits that "cross compiling
OpenMPI is a known issue" and the way to workaround this is to
"pre-populate configure's answers to the Fortran tests (so that it
doesn't actually have to run anything)"
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: use the config cache mechanism to preseed the cache variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This hook is not required anymore since we handle WebRTC dependency
with --enable/disable-webrtc-aec.
Also the hook doesn't have any effect since we use autoreconf because
it should have been a POST_CONFIGURE_HOOKS.
So, we can remove it safely.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AllJoyn framework defines a common way for devices and apps to
communicate with one another regardless of brands, categories,
transports, and OSes. Developers write applications that discover
nearby devices, and communicate with each other directly and through
the cloud, unleashing new possibilities in the Internet of Things.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- remove / at the beginning of the ALLJOYN_DISTDIR variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lapack is a fortran-based linear algebra math library.
Signed-off-by: Benjamin Kamath <bkamath@spaceflight.com>
[Samuel:
- Update to use BR2_TOOLCHAIN_HAS_FORTRAN symbol + add comment
when the toolchain does not meet the requirements.
- Update powerpc/uclibc dependencies to allow build with musl.
- Bump to 3.6.1.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: move comment about installed libraries from .mk file to
Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jemalloc has a hard-coded list of supported architectures, which it uses
to define the minimum alignment for allocations. It whines at build time
(not at configure time) when it does not know that alignment.
Fix that by making jemalloc depend on the known-supported architectures.
Fixes:
http://autobuild.buildroot.org/results/674/674b6022f9a403528a758c0785656d2bda79e0a9/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- split ARM and AArch64 dependencies on two lines
- for SuperH, instead of using BR2_sh && !BR2_sh2, explicitly list the
SH4 variants, since only SH4 is supported by jemalloc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes PYTHON_PILLOW_INSTALL_TARGET_CMDS to actually
install pillow in target directory instead of host.
While at it, it also fixes the version for the hash, and uses the more
conventional "define ... endef" construct to define variables in
python-pillow.mk.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- fix the license information, it's GPLv3+, LGPLv3+.
- add a comment about the COPYING file containing only the LGPLv3 text,
even though there is some GPLv3+ code.
- minor tweaks in the .mk file
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in commit
b05ff12b6c ("uboot: install multiple spl
images"), leading to a missing closing parenthesis. This commit fixes
this typo.
Fixes bug #9086
Reported-by: Jebodiah Sensai <dkaplan65@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Sébastien Szymanski [1], the apply-patches script
doesn't stop if a tar command can't extract an archive.
Use "set -e" to exit immediately if a command return an error.
Be sure to ignore any expected error: when we check if a patch to be
applied has the same basename as an already applied patch, the grep
would fail when no such patch was already applied. We should not fail
in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Shell In A Box implements a web server that can export arbitrary command
line tools to a web based terminal emulator. This emulator is accessible
to any JavaScript and CSS enabled web browser and does not require any
additional browser plugins.
Signed-off-by: Olivier Singla <olivier.singla@gmail.com>
[Thomas:
- Use "select" instead of "depends on" for the OpenSSL dependency, and
use alphabetic ordering.
- Rewrap Config.in help text.
- Use github macro
- Explain why the OpenSSL dependency is mandatory, while
--enable-ssl/--disable-ssl are available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds python pillow, the friendly python image library fork,
it includes a backported patch to disable configuration platfom
guessing.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas:
- Rewrap Config.in help text.
- As suggested by Bernd Kuhls, bump the version to 3.3.0 and drop the
patch that has been applied upstream.
- Rework the optional dependency handling to follow what we do in most
Buildroot packages.
- Add licensing information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas:
- Add dependency on BR2_USE_MMU
- Rewrap Config.in help text
- PID file goes in /var/run/
- Daemon to start is /usr/sbin/sockd, not /usr/sbin/dante
- Remove staging installation, as it is not needed
- Remove --enable-debug, since that's not what BR2_ENABLE_DEBUG is
meant for
- Install an example configuration file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some platforms, there are multiple generated spl images. Extend
BR2_TARGET_UBOOT_SPL_NAME to allow these multiple images to be installed
after uboot build completes.
For example, the NextThingCo C.H.I.P. uses two binaries from uboot,
spl/sunxi-spl.bin and spl/sunxi-spl-with-ecc.bin.
Signed-off-by: Jason Abele <jason@nextthing.co>
[Maxime:
- Add foreach loop for general case and mkpimage
- Use firstword for zynq case]
Signe-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two previous patches have been merged upstream, so they have been
deleted here. Another patch (picked from upstream) has been added to fix
the build with thread-less toolchains.
Libiio v0.7 provides two new backends, a USB backend (using libusb-1.0)
and a serial backend (using libserialport).
Additionally, it is now possible to compile libiio with thread-less
toolchains. In that case, thread safety is disabled.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Register package-specific target-finalize hooks with the
newly-introduced <PKG>_TARGET_FINALIZE_HOOKS.
This incidentally fixes luarocks, which was registering target-finalize
hooks even when it was not enabled.
To be noted, the skeleton package is not converted, because it is not
optional, we always have it; so its hooks would always be registered
anyway. Besides, the followup patches would render this conversion moot
anyway, since those hooks would be spread across the various skeleton
packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, packages using target finalize hooks must remember that they
need to register their hook in TARGET_FINALIZE_HOOKS
conditionally (otherwise their hook will be triggered even if the
package is disabled).
In order to avoid this potential mistake, this commit introduces a
per-package target-finalize hook variable, in which packages can
register their target-finalize hooks, with the guarantee that they will
only be triggered if the package is enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hostname does not look like it serves any useful purpose, except
maybe to set set perladmin email.
Which is undoubtfully useless on the target.
A followup commit will make the hostname depend on the default skeleton,
so it won't always be available. We can not rely on it to be set.
Besides, even today it is not guaranteed to be set; a user may well
leave it empty.
Use a dummy hostname.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, our /etc/mtab points to /proc/mounts. This was all neat so
far, and was good for a sysv-like init system.
However, the way today is to point it at /proc/self/mounts, the
per-process mount tab.
Additionnally, that's what systemd expects. If /etc/mtab is not a
symlink to ../proc/self/mounts and the rootfs is readonly, systemd would
whine loudly (and a service unit would be marked failed).
Since it works well for sysv-like init systems too, just use that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In makefiles, variables have global scope. We traditionally ensure that
we get no name clashing by prefixing all variables with the package
name.
Currently, this is not the case in the skeleton package, for historical
reasons (code snippets copied over from the common Makefiles). We
currently have a mix of naming for the variables:
- some are indeed prefixed with SKELETON_
- some are prefixed with SYSTEM_
- some are prefixed with both
- some are not prefixed
Clean up these discrepancies, and prefix all variables with just
SKELETON_ and drop the SYSTEM_ prefix.
Also include SET_ in all variables that do set something (getty) for
consistency across all the variables.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 2.26 binutils tarball has incorrect timestamps for the .info files,
so binutils build system tries to regenerate them with makeinfo. In
order to avoid depending on host-texinfo, we simply touch the .info
files so that their timestamp is newer than the corresponding source
files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the dependency on host-texinfo to binutils, when the
source is fetched from Git. Thanks to this, we can remove the
0800-Docs-Prevent-build-failures-when-makeinfo-is-missing.patch patch
from the ARC-specific version of binutils.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have tried multiple solutions to solve the "makeinfo" problem in
binutils and gdb, without finding anything really convincing. So it
seems like the easiest solution is to add a texinfo host package, and
use it as a dependency of binutils/gdb when they are fetched from
Git. This commit introduces just the host-texinfo package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gallium driver also provides DRI-like infrastructure and OpenGL.
This change prevents from removing pkg-configs of them also when
installing the driver.
Signed-off-by: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7b17bafc5d by Davide Viti has a
detailed explanation of some unusual techniques used for building
host-cmake and (target-)cmake. This is useful information for whoever
starts hacking on it, so copy it in the makefile, where it will be
easily noticed.
Also remove the sentence about host-cmake having a runtime dependency
on host-pkgconfig (not true anymore: it's the specific cmake-packages
that depend on it) and fix typos.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 3d475ee0ba a dependency on
host-pkgconf was added to host-cmake. It is a workaround to fix build
failures for packages that use pkgconf through a cmake module, but do
not depend on host-pkgconf as they should.
Since it is the package that needs host-pkgconf and not host-cmake
itself, move the dependency to the proper place, in pkg-cmake.mk.
Also copy the explanation on the mentioned commit as a comment in
order to clarify why we do this.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- update on top of master
- drop empty HOST_CMAKE_DEPENDENCIES, no longer needed since host
dependencies are no longer derived from target dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is required to build uClibc-ng with threading support and FDPIC
binary format.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 0dca644e44 ("boot/uboot: fix
missing host-openssl for i.MX28 target"), we pass HOSTCFLAGS/HOSTLDFLAGS
in the environment of U-Boot when building. This is needed to allow
U-Boot to find the OpenSSL headers/libraries when they are
needed. Unfortunately, this breaks the build with old U-Boot versions as
the U-Boot Makefiles were not designed to have HOSTCFLAGS passed in,
which causes some important CFLAGS from the U-Boot build system to be
ignored.
As suggested by Arnout, we pass the HOST_CFLAGS inside HOSTCC directly,
which allows to pass the CFLAGS without overriding the internal U-Boot
CFLAGS.
Tested with an old U-Boot (2012.10), and a modern U-Boot in a
configuration that needs OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides jemalloc, a malloc(3) implementation that
emphasizes fragmentation avoidance and scalable concurrency support.
A host variant is added as it will be used by rust.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- remove trailing slash (noticed by Romain Naour)
- add !BR2_STATIC_LIBS dependency (noticed by Romain Naour).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
docker-containerd is a daemon and API for controlling and managing runC
containers.
https://containerd.tools/
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- simplify a bit the comments about the runtime dependencies
- add missing comment on wchar, and take into account the BR2_USE_MMU
dependency in the comment
- factorize the build step with a foreach loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
runC is a CLI tool for spawning and running containers according to the
OCP specification.
runC is used by the latest Docker engine versions, however, runc itself
is standalone and has no other dependencies.
https://runc.io/
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ACPI Component Architecture (ACPICA) project provides an operating
system (OS)-independent reference implementation of the Advanced
Configuration and Power Interface Specification (ACPI).
It contains tools such as acpidump, iasl, acpixtract, etc.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: adjust install flags to -m755.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The situation looks like following for elf2flt and binfmt FLAT:
* Only gcc for bfin/m68k implements
-msep-data (BR2_BINFMT_FLAT_SEP_DATA) and
-mid-shared-library (BR2_BINFMT_FLAT_SHARED), so the corresponding
options are made only visible on those architectures.
* When the default of BR2_BINFMT_FLAT_ONE is used on m68k, broken
binaries are produced, which mainly end up in SIGILL, so do not use
it for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- also add the dependencies on m68k/bfin to BR2_BINFMT_FLAT_SHARED
- rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Library and some tools (dbus-lanuch, dbus-run-session) are dual
licensed under GPLv2 or AFLv2.1 and others (dbus-monitor, dbus-send,
dbus-cleanup-sockets, dbus-uuidgen) are licensed under GPLv2+
only.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GnuTLS core library is licensed under LGPLv2.1+ while gnutls-openssl
library is licensed under GPLv3+. Annotate the license with components.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas:
- add comment about the license of the "core library" since some files
seems to be mistakenly under LGPLv3+ even though the library is
licensed under LGPLv2.1+.
- add the README file in the license information, since it contains a
lot of useful details.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's really not necessary to have each option for the different file
formats named "enable XYZ file format support". Saying "XYZ support" is
sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The only menu was "Module Selection", even though it contained
options (like "NPM for target") which are not related to selecting
modules. This commit therefore removes the menu ... endmenu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With only 3 sub-options, it doesn't really make a lot of sense to have a
sub-menu, so kill it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also makes the prompts of the various sub-options more in line with what
we do in the rest of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Keep the existing sub-menus, because there are a lot of entries in those
sub-menus. Using comments to separate them is not a totally satifactory
solution.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tests programs are not that important; at least, they're probably less
important than the drivers selection.
Move it down to after the drivers selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on a patch sent by Vicente Olivert Riera and commented by
Arnout Vandecappelle [1].
- Bump version to 1.23
- Add a hook to fix cross-compilation
- Fix license and license files
- Remove patch applied upstream
- Add a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS variable
- Propagate the dependencies using that variable:
* package/cppcms
* package/crda
* package/gnupg2
- package/gcr
- package/midori
* package/kodi
* package/libaacs
* package/libassuan
* package/libgcrypt
* package/libgpgme
* package/libksba
* package/libmicrohttpd
- package/janus-gateway
- package/kodi
- package/ola
- package/systemd
* package/libssh
* package/libssh2
- package/php-ssh2
* package/netatalk
* package/network-manager
* package/ntfs-3g
* package/opkg
* package/php-gnupg
* package/rng-tools
* package/strongswan
* package/vpnc
[1] http://patchwork.ozlabs.org/patch/416427/
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- rebase on master
- changing systemd no longer needed, as it no longer selects
libgcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Maxime:
- rebase on master
- bump to new version
- propagate dependencies to missing packages]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- fix hash file.
- change the way to handle the various arch so that it works properly
for uClibc.
- add nios2 arch support.
- Maxime Hadjinlian learned some basic Emacs-fu to do the final fixups
of this commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Passing this option disables the lfloat and ladsp pcm plugins and certain
APIs as explained by:
https://patchwork.ozlabs.org/patch/619527/
But people might want to use these even if they use software floating point,
and the size difference is really minimal, so don't pass this option.
-rwxr-xr-x 1 peko peko 774K Jul 4 18:50 target-orig/usr/lib/libasound.so.2.0.0
-rwxr-xr-x 1 peko peko 709K Jul 4 19:08 target-softfloat/usr/lib/libasound.so.2.0.0
If people don't want the extra pcm plugins then they can simply be disabled
using BR2_PACKAGE_ALSA_LIB_PCM_PLUGINS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It appears that Imagemagick needs to be configured with
--with-gs-font-dir=/usr/share/fonts/gs else it will not find
the ghostscript fonts and /etc/ImageMagick-6/type-ghostscript.xml
will contain the wrong font paths. You end up with messages like:
Magick: unable to read font `(null)' @ error/annotate.c/RenderFreetype/1153
They are non-fatal but could get annoying fast if you are using 'convert'
on a lot of files.
Without patch we end up with (depending on what is available on the host):
Font Configuration:
Apple fonts --with-apple-font-dir=default
Dejavu fonts --with-dejavu-font-dir=default none
Ghostscript fonts --with-gs-font-dir=default /usr/share/fonts/type1/gsfonts/
Windows fonts --with-windows-font-dir=default none
And with the patch:
Font Configuration:
Apple fonts --with-apple-font-dir=default
Dejavu fonts --with-dejavu-font-dir=default none
Ghostscript fonts --with-gs-font-dir=/usr/share/fonts/gs /usr/share/fonts/gs/
Windows fonts --with-windows-font-dir=default none
[Peter: reworked/extended commit message]
Signed-off-by: Robert Sohn <grepper@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- add comment in scancpan about the version dependency, suggested by
Yann E. Morin.
- add comment in perl.mk about the need to sync any version change with
scancpan, also suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there were multiple sub-menus, their prompts are turned into
comments.
Some option were missing a prompt, so add one; switch integer options to
use the 'int' type instead of 'string'. Add separating lines around
options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, pulseaudio optionally depends on webrtc if it is enabled.
However, it is never explcitly enabled or disabled, although
pulseaudio's ./configure has --enable/disable-webrtc-aec.
Forcibly enable/disable webrtc support using those options.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've merged nodm, the autologin display manager, we can
get rid of xinit, and startx hack and use nodm to start X on boot.
While here, let's start xterm and glmark2, just as demos.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No significant changes but 4.6.3 moved parts of the device tree
into a different file, so dts patch must be updated.
[Peter: explicitly configure kernel headers for 4.6]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sha256 checksum will be computed locally either by scanpypi at package
creation or by hand by package updates. Define this checksum as
'computed locally' so that one doesn't need to change this comment by
package updates. Also put comments for both md5 and sha256 in one line.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Having the BR2_PACKAGE_BUSYBOX_SHOW_OTHERS dependencies in
package/Config.in is not very practical: it makes this file not very
readable, and puts the dependency away from the package itself, which
can sometimes be confusing. Therefore, this commit moves the dependency
in each package Config.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though mplayer bundles the ffmpeg code base (and ffmpeg is not
affected by this issue), mplayer uses its own build system and doesn't
test properly for the availability (or not) of atomic operations. In
order to keep things simple, we simply make mplayer depend on the
availability of atomic operations, since it assumes they are available.
The reverse dependency is propagated to libplayer and tovid.
Fixes:
http://autobuild.buildroot.net/results/6306757da3be9bb7e3cdcbfc8abb4e64a3fb7913/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change init script to start and stop all nfs daemons in a consistent
way. Using the same kill command, start/stop the daemon, printout OK or
FAIL and touch or deleted necessary files.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
[Maxime:
- Make it really consistent to stop the daemons as pointed out by
Yann E. Morin
- Remove the -9]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation of enabling vde2 support in host-qemu package.
Signed-off-by: Simon Maes <simonn.maes@gmail.com>
[Thomas:
- add HOST_VDE2_CONF_OPTS and HOST_VDE2_MAKE, like we have for the
target variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for building the system emulation mode in
host-qemu. To do so, it adds the BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE and
BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE sub-options, making sure that the
latter is selected if the former is not enabled. This ensures that at
least one is enabled *and* that existing configurations continue to
build the user-land emulation (which was the only one we supported until
now).
The list of architectures supported by the system emulation mode is the
same as the one for the user-space emulation mode (as far as the
existing list is concerned), so we simply drop the comment about this
dependency list being related to the user-space emulation only.
Signed-off-by: Simon Maes <simonn.maes@gmail.com>
[Thomas:
- Make sure either BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE or
BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE get selected.
- Unconditionally enable FDT support in host-qemu when in system
mode (so the option BR2_PACKAGE_HOST_QEMU_FDT has been removed)
- Remove the unneeded BR2_PACKAGE_HOST_QEMU_HAS_EMULS option.
- Remove the SDL related option, we really on the system to provide
SDL.
- Remove the BR2_PACKAGE_HOST_QEMU_DEBUG and
BR2_PACKAGE_HOST_QEMU_STRIP_BINARY options, since they are not really
useful.
- Remove HOST_QEMU_SITE and HOST_QEMU_SOURCE definitions, since they
are automatically derived from QEMU_SITE and QEMU_SOURCE anyway.
- Group things more logically in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY depends on
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT because CONFIG_WIFI_DISPLAY needs
CONFIG_P2P.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc 6.1.0 and binutils 2.26 internal bfin toolchain can be used. A
gcc patch is required, which was reported upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures, f.e. Blackfin doesn't support to configure GCC with
--with-cpu to set some CPU specific default CFLAGS (-mcpu=foo). Use a
hidden config symbol to give a hint which architecture supports it,
otherwise add defaults to toolchain wrapper for internal toolchains.
Idea from Thomas Petazzoni.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- simplify the Config.in logic with just one option named
BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS, defined in package/gcc in one
place.
- improve the organization of the code and name of variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we build the list of patches to include to compute the hash for
ccache, a typo precented the special gcc-initial/ and gcc-final/
directories from a global patch dir to be included in the calculation.
Fix that by properly expanding the $(PKG) variable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a tag rather than a sha1, it's more obvious.
Remove the patch, it's been applied upstream.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that this package builds and bundles a number of libraries,
such as GLEW and Irrlicht. We are not interested in doing
non-upstreamable changes, so it is not desirable to modify
this choice in any way.
In addition, Supertuxkart builds a version of the angelscript
interpreter. If a compatible version of angelscript is installed
on the system, it's possible to use it.
[Peter: DOS newlines for 0002 patch, tweak comment header]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Chromebook Snow (Samsung XE303C12) is an Exynos 5 board with
a keyboard, an 11 inch screen and a battery attached.
It is relatively developer-friendly and can run mainline Linux
kernels with little to no effort.
There is barely anything special about this target as far as toolchain
is concerned, but its bootloader only accepts signed kernel images
in a Chromium OS specific format, and is not controllable otherwise.
This config provides a script for building the proper kernel blobs,
and a short manual for booting Buildroot images on this device.
In-tree exynos_defconfig is used for the kernel, with a fragment
to change mwifiex into a module. When built statically, mwifiex
attempts to load its firmware before rootfs is mounted and fails.
[Peter: use BR2_KERNEL_HEADERS_AS_KERNEL=y, lock kernel version,
enable fit support in u-boot mkimage]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Damien Lanson <damien@kal-host.com>
[Thomas:
- Add dependency on BR2_PACKAGE_XORG7, which is necessary when
selecting BR2_PACKAGE_XLIB_LIBX11 and BR2_PACKAGE_XLIB_LIBXEXT.
- Fix indentation of Config.in help text.
- Add host-pkgconf to the dependencies, since the configure script uses
pkg-config to detect dependencies.
- Add references for the patches.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some users have the need to be able to tweak the content of the target
rootfs with root-like rights, that is, from inside the fakeroot script.
Add a new system option to allow those users to provide a list of
scripts, like the post-build and post-image scripts, that will be run
from our fakeroot script.
[Peter: pass TARGET_DIR to scripts, tweak help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Cam Hutchison <camh@xdna.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Transmission bundles copies of both libraries and uses them if they are
not provided by the system. This patch allows transmission to use the
system libraries of libminiupnpc/libnatpmp.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fortran depends on libquadmath when available, make the buildroot
toolchain option depends on this new hidden symbol,
[Vincent: only do "HOST_GCC_FINAL_USR_LIBS += libquadmath" for i386 and
x86_64, otherwise it will fail saying "libquadmath.a: file not found"]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This hidden symbol allow to know when libquadmath can be built and
installed.
Also, declaring this symbol in toolchain-common.in allows to use it in
both external and buildroot toolchain backend.
This will be needed for adding/improving the fortran support.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed unconditional 'done' output when starting
and stopping the daemons. Instead check return value
of daemon and print out OK or FAIL.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a template service file as all of the daemons use almost
identical arguments and generally appear the same to the init
system.
We "Wants=" zebra as that's the daemon for interfacing to the
kernel, and it's not required for the other daemons to work
but it's probably going to be used in nearly all setups.
/usr/bin/env is needed as systemd doesn't allow the instance
variable (%i) in the executable path.
We don't enable these services by default as this would require
creating configuration and /etc/default files. (And is easily
achieved with an FS overlay)
[Peter: remove killmode/killsignal/restartsec as suggested by Maxime]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building host gcc, patches stored in global patches directories are
skipped. This patch fixes the unexpected behavior.
Signed-off-by: Chunhui He <hchunhui@mail.ustc.edu.cn>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- rename the loop variable from 'D' to 'patchdir'
- add some additional comments
- remove final ; at end of loop when applying the patches, since it's
not needed]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, when an user forgets to define a SITE, he gets some fairly
weird download failure. In order to make things easier to diagnose, this
commit adds a check in the package infrastructure that verifies that if
SOURCE has a value, SITE is not empty.
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the custom external toolchain is locally available, we currently
define SITE/SOURCE to empty variables. Now that the package
infrastructure doesn't define a value for SOURCE when VERSION is empty,
it doesn't attempt to download a file anymore, so we can get rid of
those empty SOURCE/SITE variables in the toolchain-external package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the mcookie package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the tz package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the skeleton package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the mkpimage package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the mkpasswd package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the mke2img package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the initscripts package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the getent package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the virtual package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the makedevs package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when the package defines no _SOURCE and no _VERSION
variables, we end up trying to download <PACKAGE>-undefined.tar.gz.
This is utterly pointless.
Change the logic to not attempt a download when neither _SOURCE
nor _VERSION is set:
- do not set an undefined _VERSION to "undefined"
- do not append an empty (or "undefined") version to the package
rawname
Consequently, for packages that have no _VERSION, the build
directory will be just the package name (which to some may look
nicer than the current "package-undefined").
Furthermore, the message trace is also a bit leaner (to the same
people that find "package" nicer than "package-undefined").
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cups is now available from Github, with tarballs uploaded by the
maintainers, so we use this new upstream location.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches in the cups package are Git formatted, except
0004-remove-pie.patch, so this commit makes things consistent by also
making this patch Git formatted.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes http://autobuild.buildroot.org/results/5a5/5a50be9feeb5da7694e9a42f615f0b7276319aeb/
The recent change to use git submodules for sunxi-mali instead of the github
wrapper without changing the version unfortunately doesn't work for people
who have already built sunxi-mali, as the existing github tarball will be
used instead of buildroot doing a clean git clone (with submodules).
The sunxi-mali commit we are using is the latest in the repo, so we cannot
fix it by bumping the version. Instead simply remove the last character of
the VERSION sha1 so the existing tarballs are no longer used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sunxi-mali-prop only served a feeding prey for sunxi-mali to get the
proprietary libs.
Now that sunxi-mali downloads them (as the git submodule they are), we
no longer need sunxi-mali-prop.
Remove it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sunxi-mali git tree is set up with a submodule that contains the
actual libraries. Since there was no support for git submodules so far,
we used a dirty trick to have that submodule cloned by its own package,
with sunxi-mali just vampirising it into its own build dir.
Now that we have support for git submodules, we can simplify stuff a
bit, and have sunxi-mali directly download the proprietary libs itself.
Remove the .hash file since we're not checking hashes for git clones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove patches as they were applied upstream:
0001-Use-BUILD_SHARED_LIBS-cmake-standard.patch
c8ec6fcab4
0002-Rename-test-fixed-cmake-warning.patch
0b2c22bd46
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Since we run compileall on all python files in TARGET_DIR as part of
the finalization, the align.py from xcb-proto will be compiled (it is
not compiled as part of the package build). This file contains mixed
tab-spaces indentation, which python 3.5 no longer allows.
Add an upstream patch that cleans up the indentation in this file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that host-tar dependencies were broken with automatic derivation
of host dependencies:
host-tar could depend (or not) on host-attr (and even on non-existing
host-acl!), depending on BR2_PACKAGE_BUSYBOX.
Now, host-tar has no dependency.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This feature consists in automatically deducing dependencies of a host
package from the dependencies of the target variant.
However, it causes some issues, and many host packages need different
dependencies than their target variants.
Now that host dependencies are explicitly set for all packages, we can
remove it.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment was missing in menuconfig with a non-threaded toolchain
supporting dynamic linking.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch also removes an incorrect dependency between host-libftdi and
host-boost when BR2_PACKAGE_LIBTFDI_CPP is set.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some git repositories may be split into a master repository and
submodules. Up until now, we did not have support for submodules,
because we were using bare clones, in which it is not possible to
update the list of submodules.
Now that we are using plain clones with a working copy, we can retrieve
the submdoules.
Add an option to the git download helper to kick the update of
submodules, so that they are only fetched for those packages that
require them. Also document the existing -q option at the same time.
Submodules have a .git file at their root, which contains the path to
the real .git directory of the master repository. Since we remove it,
there is no point in keeping those .git files either.
Note: this is currently unused, but will be enabled with the follow-up
patch that adds the necessary parts in the pkg-generic and pkg-download
infrastructures.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently use git-archive to generate the tarball. This is all handy
and dandy, but git-archive does not support submodules. In the follow-up
patch, we're going to handle submodules, so we would not be able to use
git-archive.
Instead, we manually generate the archive:
- extract the tree to the requested cset,
- get the date of the commit to store in the archive,
- store only numeric owners,
- store owner and group as 0 (zero, although any arbitrary value would
have been fine, as long as it's a constant),
- sort the files to store in the archive.
We also get rid of the .git directory, because there is no reason to
keep it in the context of Buildroot. Some people would love to keep it
so as to speed up later downloads when updating a package, but that is
not really doable. For example:
- use current Buildroot
- it would need foo-12345, so do a clone and keep the .git in the
generated tarball
- update Buildroot
- it would need foo-98765
For that second clone, how could we know we would have to first extract
foo-12345 ? So, the .git in the archive is pretty much useless for
Buildroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we are using bare clones, so as to minimise the disk usage,
most notably for largeish repositories such as the one for the Linux
kernel, which can go beyond the 1GiB barrier.
However, this precludes updating (and thus using) the submodules, if
any, of the repositories, as a working copy is required to use
submodules (becaue we need to know the list of submodules, where to find
them, where to clone them, what cset to checkout, and all those is
dependent upon the checked out cset of the father repository).
Switch to using /plain/ clones with a working copy.
This means that the extra refs used by some forges (like pull-requests
for Github, or changes for gerrit...) are no longer fetched as part of
the clone, because git does not offer to do a mirror clone when there is
a working copy.
Instead, we have to fetch those special refs by hand. Since there is no
easy solution to know whether the cset the user asked for is such a
special ref or not, we just try to always fetch the cset requested by
the user; if this fails, we assume that this is not a special ref (most
probably, it is a sha1) and we defer the check to the archive creation,
which would fail if the requested cset is missing anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now this library wasn't handled by the Buildroot packaging,
so add a new config option to disable it when requested.
Also disable boost-type_erasure for the host variant to keep it as
minimal as possible.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMUSphinx toolkit is a speech recognition toolkit with various tools
used to build speech applications. CMU Sphinx toolkit has a number of
packages for different tasks and applications. The toolkit is designed
for use on mobile platforms.
Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
[Thomas:
- license is BSD-2c, not MIT
- add --without-lapack]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since systemd v230, bootchart has been removed from the source of
systemd and now lives in its own repository.
A new package will be added in the next commit.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since v230 of systemd, the compat libraries have been fully removed.
4de282cf93
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: rewrap Config.in help text in Config.in.legacy and put the
option at the right place.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems logical to enable a few options along with systemd when it's
the init system.
Also change the help as timesyncd is a daemon that implements an SNTP client.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't want to create a bunch of group and users that might not be
used, it's more elegant to create them when the associated features is
selected.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise fftw fails to configure:
configure: error: --with-combined-threads incompatible with --enable-openmp
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The console problem goes away with qemu 2.6.0 so it seems it's now a
requirement, update readme.txt accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to current "include/configs/sunxi-common.h"
U-Boot environment is stored on SD-card with offset 544 kB
and its size is limited as 128 kB.
Given memory layout of sunxi boards:
1. SPL
2. U-Boot
3. U-Boot environment
4. Partitions
(see http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout for details)
we need to make sure the first real partition starts at least
with 544+128 kB offset. Adding a small safety gap let's put
the first partition with offset 1MB from the beginning of SD-card.
Otherwise current setup gets broken as soon as one saves U-Boot
environment with "saveenv" which basically overwrites FAT partition with
zImage and board no longer boots into Linux kernel.
[Peter: extend description, add padding to u-boot partition instead]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Carlos Quijano <carlos@crqgestion.es>
Cc: Andi Shyti <andi@etezian.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new change which enabled automatic module loading on boot does not handle
the cases when module alias includes spaces. It prevents modules to be loaded
since script fails:
% find /sys/ -name modalias | xargs sort -u
sort: /sys/devices/platform/Fixed: No such file or directory
First alias in question is "platform:Fixed MDIO bus".
Amend the script to support above like cases.
Fixes: 07f46c2b6d ("package/busybox: support automatic module loading with mdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The support of qrencode depends of the journal gateway feature as it is
used to display the key used to seal the journal.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd-journal is a group used for controlling user access to the
journal when used with tools like journalctl.
While we're at it, sort the users list to improve readability.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And export BR2_REPRODUCIBLE for post-build / post-image scripts.
[Peter: Extend commit message,
move export together with our other exports,
add comment explaining why we override local/timezone]
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Making the builds reproducible involves turning off build timestamps,
which some users may find annoying. So make the reproducible builds
optional.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ancient distros (especially enterprise-grade still in use) do not accept
ln --relative.
Revert the upstream commit, since the problem it was trying to fix is
not applicable in the context of Buildroot (even with a merged /usr).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the documentation on BR2_ENABLE_DEBUG, the intention is to get
a build with debug symbols and not a "debug build" since that can have
the unintended consequence of being a different code path then a
release build type definition.
Switch the "Debug" to "RelWithDebInfo" in the cmake package support
to accomodate getting the debug symbols and still be a release
build.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For fortran detection, some projects check for fortran availability
using the FC/FCFLAGS variables, and others for the legacy F77/FFLAGS
ones.
So, make sure the legacy fortran F77 and FFLAGS variables are set in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
[Romain:
- fix autoreconf issue by using GETTEXTIZE and AUTORECONF
- fix issue with missing makeinfo
- move version number comment in .mk]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: add GPLv2 license, used for the programs.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for a custom headers version, or for the same headers as the
kernel, wedefault to a "very old" version (i.e. 2.6.x in practice).
However, as Vivien explained, when using the same headers as the kernel,
and the kernel is set to use the default version (aka latest version
known to Buildroot) of the kernel, one would expect the headers are
automatically tracking the latest version. Off course, that expectation
is broken because of the above.
However, whatever version we default to, it will probably not be
correct, whether we default to the latest version or to the "very old"
version.
So, simply drop the specific default version, so the default is now the
latest version.
Note: that has the potential to break existing defconfig files that
relied on the "very old" version to be the default. Well, whatever,
they'll get a build failre quite early, and it is easy to fix.
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_BUILDROOT_WCHAR is only defined when uclibc is selected,
whereas BR2_USE_WCHAR is always defined. Due to this, we were disabling
quadmath support even with glibc or musl.
So, use BR2_USE_WCHAR to drive the gcc libquadmath option.
In addition, invert the logic of the condition to use positive logic,
and rework the comment to no longer mention gcc 4.6: libquadmath still
exists, and it still requires wchar support.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efivar internal build system uses flags such as -std=gnu11 ,
-Wmaybe-uninitialized , -flto which are available in gcc >= 4.7 only.
These flags are passed both to target build and to build a host tool.
For the host part, this has been worked around by overriding
'gcc_flags', but doing that for the target would remove all flags that
upstream intended for the target build.
Buildroot doesn't support building gcc 4.6 in its own toolchain anymore
but it's possible to use an external toolchain with gcc 4.6 which would
be unable to build this package.
This patch adds a limitation on toolchains with target gcc >= 4.7 to
make sure that the flags are available in the chosen toolchain.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenBLAS is optimised for specific CPU models, which don't fully match
with the GCC code generation options. Therefore, we can't automatically
select BR2_PACKAGE_OPENBLAS_TARGET based on the CPU choice. Instead, let
the user select the TARGET name, but offer a sensible default. Other
possible solutions were deemed too complicated: adding choice options in
the ambiguous cases, or only making the option user-visible when there
is ambiguity.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable the -Werror gcc option because is causes the following error
when using gcc 6.x on the host.
p_vmlinx.cpp💯5: error: this ‘if’ clause does not guard...
[-Werror=misleading-indentation] if (a->p_paddr > b->p_paddr) return 1;
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ucl fails with the following error when using gcc 6.x on the host:
checking whether your compiler passes the ACC conformance test... FAILED
configure:
configure: Your compiler failed the ACC conformance test - for details see
configure: `config.log'. Please check that log file and consider sending
configure: a patch or bug-report to <markus@oberhumer.com>.
configure: Thanks for your support.
configure:
configure: error: ACC conformance test failed. Stop.
Fix the issue by using the ISO C90 standard.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to setup.py tornado requires backports.ssl_match_hostname
for Python < 3.2 and certifi for Python < 3.4.
Actually both requirements are optional and tornado alone can work
without them, but Python packages like python-circus check requirements
at runtime and though they don't use this funtionality, they insist on
having these packages installed.
An upstream patch fixes backports.ssl_match_hostname dependency and
selecting python-certifi for Python 2 fixes certifi dependency till
this is fixed upstream.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit reworks the output of the start(), stop() and reload()
functions. The return values of start-stop-daemon are now checked and a
OK or FAIL message is printed out.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch removes 'set -e' from the netsnmp init script since it causes
the init script to terminate if an error occurs. This prevents the
script to create an "FAIL" printout in case of an error.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change the init script to get rid of double code. Start, stop and reload
code has been put into separate functions and 'restart' will just call
stop() and start() with a delay in between.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove patch already upstream 0001-remove-use-of-sys-cdefs.h.patch
7b085136a7
- add new dependency on BR2_USE_WCHAR (version 2.2 uses mbtowc())
- add new dependency on locale support
- add note to help text about the need of a working UTF-8 locale
- also rewrap help text to 72 characters
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setools 3.3.8 won't cleanly compile against newer versions
of the new selinux libraries. This patch fixes these errors.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
An additional patch is needed to fix the build with uClibc.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: add patch to fix build with uClibc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 0001-execption-lib-path-fix.patch is also no longer needed, as the
new version of libsemanage includes the fix provided by the patch.
As such, the patch was removed, and 0002 was renamed to 0001.
Audit was added as a dependency as the new version of libsemanage
will fail to compile searching for audit.h
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add the select on audit + propagate the dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, if a user is using glibc 2.22, the default CFLAG
D_FILE_OFFSET_BITS=64 will cause a compile error. This flag is now
removed from the CFLAGS in the make file to ensure that toolchains
compiled against glibc 2.22 will build the new version of the package
properly.
In addition, libselinux now uses fts(), which is not available on musl,
and not provided by our default uClibc configuration. Therefore,
libselinux now depends on glibc, as well as all its reverse
dependencies.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add glibc dependency for fts().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In most cases Python's package dependencies found in setup.py are
runtime dependencies and hence don't need to be mentioned in *.mk
file.
Also add '# runtime' tag to select statements in Config.in.
__create_mk_requirements() itself is left for future uses (cffi backend
handling etc.).
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comments are meant for toolchain dependencies, not packages. Adjust the
logic to match what we do for other X11 applications.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(most of) the individual packages depends on BR2_PACKAGE_XORG7, but the
subsection comments do not, so we end up displaying them when Xorg isn't
enabled which isn't very useful:
[ ] X.org X Window System ----
*** X applications ***
*** X libraries and helper libraries ***
*** X window managers ***
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the support of capability to makedevs as extended attribute.
Now, it's possible to add a line "|xattr <capability>" after a
file description to also add a capability to this file. It's
possible to add severals capabilities with severals lines.
[Peter: extend doc, reword Config.in, extend error message,
use HOST_MAKEDEVS_CFLAGS/LDFLAGS for all flags]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we're starting a series of updates of ARC tools.
Significantly rewritten arc-2016.03 tools introduced way too many
problems highlighted by Buildroot autobuilder. Now in attempt to
resolve as many issues as possible by the time final release of
arc-2016.09 tools is cut we'll be executing arc-2016.09 series
with engineering snapshots like this one.
We decided to go this way instead of applying separate patches here
and there because ongoing development introduces quite a lot of
changes and separate patches are not practical in Buildroot.
Moreover this will give us very clean visibility of number of
issues we see (hopefully it will decrease over time).
One of the important changes introduced in this engineering build
is initial set of changes for proper support of PIE on ARC in terms
of both building on host and running on ARC target. I expect some
PIE-related build breakages to go away and new ones will be treated
as the high-priority issues to be fixed ASAP.
For now we only update Binutils and GCC while keeping GDB
as it is of arc-2016.03 release because there're some issues
we'd like to resolve before releasing it to wider audience.
So again note this is one of the first engineering builds of
arc-2016.09 series and it might have all kinds of breakages,
please don't use it for production builds.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebased 011-remove-python-symlink.patch
[Peter: correct .hash file comment as pointed out by Baruch]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: propagate linux-pam dependencies/comment,
needs wordexp.h, not available on uClibc,
use /etc/default/nodm for config override,
correct github/site/source handling,
disable help2man]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc, it no longer makes sense to talk about
it in the Buildroot manual as one of the supported C libraries. However,
it does make sense to indicate that we support musl.
[Peter: remove extra 'the' as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gettextize copies a number of files from usr/share/gettext into the project
when it is run. One of these is ABOUT-NLS, which is simply a text file
explaining some details about gettext - So it isn't really critical but
autoreconf fails if gettext functionality is used and ABOUT-NLS is missing.
Normally this isn't an issue as the release tarball typically already
contains an ABOUT-NLS file, but as this is a generated file it normally
isn't checked into git so it fails for packages from git snapshots using
<foo>_GETTEXTIZE = YES (E.G. libuio):
configure.ac:42: error: required file './ABOUT-NLS' not found
As is evident from GETTEXT_REMOVE_UNNEEDED, this file normally gets
installed by gettext-runtime, but as we don't build/install that for the
host instead install it by hand.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The real functional change (to not wait for confirmation) was alredy handled
below in HOST_GETTEXT_GETTEXTIZE_CONFIRMATION, and we otherwise don't patch
upstream purely for cosmetical reasons so drop it.
gettextize is also quite noisy as is, so the single 'Press return' line imho
isn't a big issue:
>>> fetchmail 6.3.26 Gettextizing
Copying file config.rpath
Not copying intl/ directory.
Copying file po/Makefile.in.in
Copying file po/Makevars.template
Copying file po/Rules-quot
Copying file po/boldquot.sed
Copying file po/en@boldquot.header
Copying file po/en@quot.header
Copying file po/insert-header.sin
Copying file po/quot.sed
Copying file po/remove-potcdate.sin
Creating po/ChangeLog
Copying file m4/gettext.m4
Copying file m4/iconv.m4
Copying file m4/lib-ld.m4
Copying file m4/lib-link.m4
Copying file m4/lib-prefix.m4
Copying file m4/nls.m4
Copying file m4/po.m4
Copying file m4/progtest.m4
Creating m4/ChangeLog
Updating configure.ac (backup is in configure.ac~)
Creating ChangeLog
Please update po/Makevars so that it defines all the variables mentioned
in po/Makevars.template.
You can then remove po/Makevars.template.
Please run 'aclocal -I m4 -I m4-local' to regenerate the aclocal.m4 file.
You need aclocal from GNU automake 1.9 (or newer) to do this.
Then run 'autoconf' to regenerate the configure file.
You might also want to copy the convenience header file gettext.h
from the /home/peko/source/buildroot/output-test/host/usr/share/gettext directory into your package.
It is a wrapper around <libintl.h> that implements the configure --disable-nls
option.
Press Return to acknowledge the previous three paragraphs.
>>> fetchmail 6.3.26 Autoreconfiguring
CC: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CONFIG_BGSCAN_SIMPLE is missing from the defconfig included with
wpa_supplicant. Many programs that depend on wpa_supplicant assume
bgscan is enabled, for example connman will try to set bgscan by default.
It is safe to always enable CONFIG_BGSCAN_SIMPLE since it is only used if
wpa_supplicant is configured to do so.
Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The phrase "Supports several hundreds of packages" is unusual to hear in
English (or at least American English). The more common alternatives are
"Supports several hundred packages" or "Supports hundreds of packages".
The latter sounds like a larger amount, so change the phrase to that.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following what's done in Raspberry Pi's defconfigs, let's
unify the consoles in Minnowboard Max defconfigs, providing
consoles on HDMI and serial port.
[Peter: use tty1 like on rpi]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And since we switched to non-gnu mirror better use the small xz tarball.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change. The git hash used is actually just the 2015.07
release, so use the release tarball instead of git. Likewise, we have a
dedicated option for u-boot.img, so use that instead of the custom format.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstreamed patches.
Drop autoreconf since it's no longer required.
Patch 0002-no-zlib.patch is no longer required, and is in fact harmful.
Update homepage URL.
Fixes:
CVE-2015-8874 - #215 Stack overflow with gdImageFillToBorder
CVE-2016-3074 - gd2: handle corrupt images better
CVE-2016-5767 - Integer Overflow in gdImagePaletteToTrueColor()
resulting in heap overflow
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix qt5enginio version, is 1.6.1 for qt5.6.1-1 (hash
is already updated by previous qt5 bump version patch).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the shut down of www.lm-sensors.org we do not have a package
download location anymore, so we update the i2c-tools package to use
the git repository hosted at kernel.org.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In efl 1.15.x, Lua "old" support is broken with Lua 5.2+ [1].
With the patch added in efl 1.16 to fixes this issue, libevas fail to link with
the following error:
CCLD bin/ecore_evas/ecore_evas_convert
host-efl-1.16.1/src/lib/evas/.libs/libevas.so: undefined reference to `luaL_openlib'
collect2: error: ld returned 1 exit status
Makefile:19021: recipe for target 'bin/ecore_evas/ecore_evas_convert' failed
Since 9ba8d1cce4, the luajit support can be
enabled in efl package.
In order to update the efl stack to 1.17, switch to luajit support and remove
Lua "old" support since it's not fixed upstream yet. But the drawback is the
efl stack depends implicitely on BR2_PACKAGE_LUAJIT_ARCH_SUPPORTS.
[1] https://phab.enlightenment.org/T2728
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move TAR_OPTS so that long options (or any option with an initial '-')
may be passed to tar. Since TAR_OPTS is at the front of the list, single
letter options still work.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efivar build process starts by building one tool for the host,
which is needed for the rest of the build. This tool currently fails
to build with old gcc versions because the gcc.specs used by efivar
specifies -std=gnu11. To address this, this patch:
- passes 'gcc_flags=' to the host build, so that the custom gcc specs
are not passed. They are in practice not needed for the build of
the simple makeguids host utility.
- passes -std=gnu99 instead of -std=c99 in the build of host
makeguids, because the source code uses anonymous structs and
unions, which requires std=gnu99 and not just std=c99
In addition, the build by default assumes that the target toolchain is
LTO capable, and that therefore you can call gcc-ar, gcc-nm and
gcc-ranlib. This fails short when the target toolchain is for example
gcc 4.7. To address this, we explicitly specify AR, NM and RANLIB to
be used, but pass them as make options instead of in the environment,
in order to override the values specified in the package Makefile.
Fixes:
http://autobuild.buildroot.net/results/fe40c1d139ba8ddeef3dafd5c1818a946f014d7c/
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove non-existing options:
* --disable-wsap
* --disable-direct3d
* --disable-gsettings
Remove options that are already handled later in the .mk file, using
optional dependencies:
* --disable-rtmp
* --disable-hls
* --disable-dash
Rename disable->strp to disable-srtp, which essentially fixes a typo.
Remove liveadder plugin - no longer a separate built option, it's been
merged into audiomixer. Config.in.legacy handling is added for the
removed option.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
[Thomas: add Config.in.legacy handling for the liveaddr plugin option,
tweaks to the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5 can optionally enable udev support, especially to enumerate input
devices dynamically. Without udev, devices are not properly enumerated,
and any device that is not present at launch time is never seen (there
is no support for hotplug, that is).
Currently, Qt5base has no explicit dependency on udev, so it will all
depend on the build order. Sometimes, a package that requires udev will
be built before qt5base and Qt5 will have support for udev, sometime no
such package is built before qt5base and Qt5 will not have support for
udev.
Add an explicit dependency on udev, but only if it is enabled.
Note: this only really requires libudev, but we do not yet have a
separate libudev; we still only have a udev provider (be it eudev or
systemd).
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Cedric Chedaleux <cedric.chedaleux@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop comment, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Almost all packages which are saved for legal-info have their source
archives downloaded as part of 'make source', which makes an off-line
build completely possible [0].
However, for the pre-configured external toolchains, the source tarball
is different, as the main tarball is a binary package. And that source
tarball is only downloaded during the legal-info phase, which makes it
inconvenient for full off-line builds.
We fix that by adding a new rule, $(1)-legal-source which only
$(1)-all-source depends on, so that we only download it for a top-level
'make source', not as part of the standard download mechanism (i.e. only
what is really needed to build).
This new rule depends, like the normal download mechanism, on a stamp
file, so that we do not emit a spurious hash-check message on successive
runs of 'make source'.
This way, we can do a complete [0] off-line build and are still able to
generate legal-info, while at the same time we do not incur any download
overhead during a simple build.
Also, we previously downloaded the _ACTUAL_SOURCE_TARBALL when it was
not empty. However, since _ACTUAL_SOURCE_TARBALL defaults to the value
of _SOURCE, it can not be empty when _SOURCE is not. Thus, we'd get a
spurious report of a missing hash for the tarball, since it was not in
a standard package rule (configure, build, install..) and thus would
miss the PKG and PKGDIR variables to find the .hash file.
We fix that in this commit as well, by:
- setting PKG and PKGDIR just for the -legal-source rule;
- only downloading _ACTUAL_SOURCE_TARBALL if it is not empty *and* not
the same as _SOURCE (to avoid a second report about the hash).
[0] Save for nodejs which invarriably wants to download stuff at build
time. Sigh... :-( Fixing that is work for another time...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the declarations of _ACTUAL_SOURCE and _ACTUAL_SITE earlier, so
that they are close to where _SOURCE and _SITE are handled.
This looks so far like a purely cosmetic change, but makes more sense
with the follow-up patch, where we'll need them earlier in the file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Having a hash of the saved files can be interesting for the recipient to
verify the integrity of the files.
We remove the warning file earlier, to exclude it from the hash
list.
We generate the hash list in a temporary file that will not be matched
by the "find" expression, and once the file is generated, we remain it
to its final name.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust indentation, improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, like perl, download extra files that end up as part of
the source that Buildroot builds. Up until now, those files were not
saved in the legal-info output.
Add those files to the legal-info output.
The unfortunate side-effect is that we will also save the secondary
archive for the external blackfin toolchains; however, we already do
save the binary release of some external toolchains when they do not
provide actual source archives.
This is inherently bad, as those are not source archives, but solving
this is a bigger concern, for another series...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the legal-info infra only saves the source archive of a
package. However, that's not enough as we may apply some patches on
packages sources.
We do suggest users to also redistribute the Buildroot sources as part
of their compliance distribution, so the patches bundled in Buildroot
would indeed be included in the compliance distribution.
However, that's still not enough, since we may download some patches, or
the user may use a global patch directory. Patches in there might not
end up in the compliance distribution, and there are risks of
non-conformity.
So, always include patches alongside the source archive.
To ensure reproducibility, we also generate a series file, so patches
can be re-applied in the correct order.
We get the list of patches to include from the list of patches that were
applied by the package infrastructure (via the apply-patches support
script). So, we need to get packages properly extracted and patched
before we can save their legal-info, not just in the case they define
_LICENSE_FILES.
Update the legal-info header accordingly.
Note: this means that, when a package is not patched and defines no
LICENSE_FILES, we will extract and patch it for nothing. There is no
easy way to know whether we have to patch a package or not. We can only
either duplicate the logic to detect patches (bad) or rely on the infra
actually patching the package. Also, a vast majority of packages are
either patched, or define _LICENSE_FILES, so it is best and easiest to
always extract and patch them prior to legal-info.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches we save can come from various locations:
- bundled with Buildroot
- downloaded
- from one or more global-patch-dir
It is possible that two patches lying into different locations have the
same basename, like so (first is bundled, second is from an hypothetical
global-patch-dir):
package/foo/0001-fix-Makefile.patch
/path/to/my/patches/foo/0001-fix-Makefile.patch
In that case, when running legal-info, we'd save only the second patch,
overwriting the first. That would be problematic, because:
- either the second patch depends on the first, and thus would no longer
apply (this is easy to detect, though),
- or the second patch does not depend on the first, and the compliance
delivery will not be complete (this is much harder to detect).
We fix that by checking that no two patches have the same same basename.
If we find that the basename of the patch to be applied collides with
that of a previously applied patch, we error out and report the duplicate.
The unfortunate side-effect is that existing setups will now break in
that situation, but that's a minor, corner-case issue that is easily
fixed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: adjust coding style, fix minor typos in the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only store the filename of the applied patches.
However, we are soon to want to install those patches in the legal-info
directory, so we'll have to know where those patches come from.
Instead of duplicating the logic to find the patches (bundled,
downloaded, from a global patch dir...), just store the full path to
each of those patches so we can retrieve them more easily later on.
Also always create the list-file, even if empty, so that we need not
test for its existence before reading it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Tested only with patches in the Buildroot sources]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: used $PWD instead of $(pwd), as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we save the source archives in a directory named after the
package and its version, do the same for the license files, for
consistency.
It has a not-so-bad side-effect of also saving the version string in
the all-licenses list.
The only (small) side-effect, is that the warnings about undefined
_LICENSE_FILES now contains the version string, too. That's unavoidable,
since that's what is stored in the legal report.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
enable-libudev doesn't exist as a configure option. The right one is
enable-udev.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-4472 - Improve insufficient fix to CVE-2015-1283 /
CVE-2015-2716 introduced with Expat 2.1.1
CVE-2016-5300 - Use more entropy for hash initialization than the
original fix to CVE-2012-0876
CVE-2012-6702 - Resolve troublesome internal call to srand that was
introduced with Expat 2.1.0 when addressing CVE-2012-0876
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches, and disable strip via the STRIP make environment
variable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some shells' builtin umask does not print 2 leading 0's for the umask.
Switching to bash is done anyway.
This patch switches to bash before the umask test.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 048e97ebde.
As noticed by Gustavo, we already had a sha256 hash from upstream, so adding
one more doesn't make any sense.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed 0001-fix-os2-support.patch, not needed anymore after the
version bump according to Thomas' note in the patch file.
Removed autoreconf, a configure script is now part of the upstream
tarball.
The script dvdnav-config was removed:
1de99510f5
libdvdnav uses pkg-config to find libdvdread, therefore remove
--with-dvdread-config:
5254b5d7ad
Changed LIBDVDNAV_SITE according to the news post dating 13 Feb 2014
from http://dvdnav.mplayerhq.hu/
Enabled static build, tested using this defconfig:
http://autobuild.buildroot.net/toolchains/configs/br-arm-full-static.config
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we don't have such packages in buildroot it can pick up the distro
config scripts and pollute the include path.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the rapidjson tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the qlibc tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the qdecoder tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the pifmrds tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the opencv3 tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the neardal tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the ne10 tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the mtdev2tuio tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the mrouted tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the mraa tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the lua-ev tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libcrossguid tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the ljsyscall tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libwebsock tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libucl tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libcli tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libpam-tacplus tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libopenh264 tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libndp tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the snappy tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the leveldb tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the ktap tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the json-javascript tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the jquery-datetimepicker tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the irqbalance tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the filemq tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the civetweb tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the c-periphery tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the bandwidthd tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the apitrace tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d732fa4 add the BLUEZ5_UTILS_INSTALL_INIT_SYSTEMD rule, however,
it is not correct. The [Install] section of bluetooth.service is as
follows:
[Install]
WantedBy=bluetooth.target
Alias=dbus-org.bluez.service
hence there are currently two mistakes:
1) bluetooth.service is wanted by bluetooth.target not multi-user.target
2) dbus-org.bluez.service is a missing alias to bluetooth.service
This commit fixes both these issues.
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop patch now upstream. Rsyslog now uses libfastjson instead of json-c,
so adjust dependencies.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-rebar tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-zlib tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-yaml tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-xml tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-utils tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-tls tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-stun tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-stringprep tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-sip tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-iconv tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-cache-tab tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-lager tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To configure the Linux kernel, we currently provide two options:
1. Passing a defconfig name (for example "multi_v7"), to which we append
"_defconfig" to run "make multi_v7_defconfig".
2. Passing a path to a custom configuration file.
Unfortunately, those two possibilities do not allow to configure the
kernel when you want to use the default configuration built into the
kernel for a given architecture. For example, on ARM64, there is a
single defconfig simply called "defconfig", which you can load by
running "make defconfig".
Using the mechanism (1) above doesn't work because we append
"_defconfig" automatically.
One solution would be to change (1) and require the user to enter the
full defconfig named (i.e "multi_v7_defconfig" instead of "multi_v7"),
but we would break all existing Buildroot configurations.
So instead, we add a third option, which simply tells Buildroot to use
the default configuration for the selected architecture. In this case,
Buildroot will configure the kernel by running "make defconfig".
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As python-msgpack dependency was replaced with python-u-msgpack,
that is a pure Python implementation, BR2_TOOLCHAIN_HAS_SYNC_4
was removed. BR2_INSTALL_LIBSTDCPP remains because of python-pyasn.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autoreconf is no longer required in gst1-plugins-bad and it is not
done for any other gst package either. With autoreconf disabled,
gettextize and a gettext makefile patch are no longer required
and can be safely removed.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Aside from the version number increase, the package has now moved to
GitHub.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Aside from the version number increase, a newly added category `places`
is available; appending to the current icon list.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a93fc34 modified e2fsprogs to symlink /usr/sbin/fsck to /sbin/fsck
to keep systemd happy. However, later on commit c5bd8af6 has forced
/usr/sbin to be a symlink to /sbin when using systemd. This means fsck
gets destroyed as a symlink to itself when using systemd or when setting
BR2_ROOTFS_MERGED_USR.
Since commit c5bd8af6 obsoletes commit a93fc34 revert the changes from
commit a93fc34 to solve the issue.
Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default hwdb files are installed in /usr/lib/udev/hwdb.d
Currently they take about ~5MB. After first boot, systemd-hwdb tool
parses them and creates a binary in /etc/udev/hwdb.bin, which takes
another ~6.5MB.
In case of initramfs images, hwdb parsing is done every boot. This adds
about 2-3 seconds to boot time in case of rootfs on SDHC class 10
card (benchmarked with am335x board). NAND boot takes even longer.
Add config option to disable hwdb in systemd, for smaller images and
better boot performance.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add new disables for libraries that aren't supported in buildroot and
sort them for ease of maintenance.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no option --enable-liblzma=no in grub2's configure script, so
the only way to disable liblzma support is to pass
ac_cv_lib_lzma_lzma_code=no.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: expand commit log, as suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Check raw mode flag for backward compatbility
- Fix membership name in bch geometry structure.
- Fix the previous implementation that may ruin the BBM
- Adapt raw page accesses to match the new raw_read/write implementation
The old raw access implementation (in GPMI driver) was considering that
data and OOB data were separated in their respective regions (the data
area and the OOB area of the page), which is not true.
They are actually interleaved this way:
METADATA + ((DATA + ECCBYTES) * N)
The new raw access implementation (in the GPMI driver) is hiding this
weird
layout to MTD users by exposing a more common layout:
DATA + METADATA + (N * ECCBYTES)
Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the
OOB area.
Unfortunately kobs-ng rely on this weird layout when accessing the NAND
in raw mode.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/a7545b1
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Remove platform check in hdmi-cec and imx-lib - simplify to support builds
on multiple machines
- For ipu use the dummy defaul object to fix build issues on non-ipu hardware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/7946533
Implicitly tested through gstreamer as the
plugins rely on them for vpu decoding, e.g.:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- fix AUD NAL positioning in h.264 encoder output
(SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last)
- fix build error with examples when --enable-static is used
- pass quality factor in simplified JPEG encoder interface correctly
- add functions for querying and setting header data
useful for modifying headers, like VUI data in the SPS RBSP
- documentation updates
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c999668
Implicitly tested through gstreamer as the plugin relies on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
VPU firmware has been changed to the format of Linux codec driver firmware.
Change VPU library to adapt to firmware format change.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f5e1056
Implicitly tested through gstreamer as the plugins rely on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
* compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
This prevents conflicts if both the NXP plugins and the gstreamer-imx
are installed in the same rootfs
* Add switches to wscript configuration to enable/disable plugins
Until now, all plugins were built (unless their dependencies were
missing). On some i.MX machines, some features are missing. For
example, the i.MX7 has no VPU. To ensure deterministic builds, it is
useful to selectively disable plugins in the build.
* ipu+pxp: : Fix deadlocks and incorrect logging in case of init error
This was causing a freeze if for example one tries to use PxP elements
on an i.MX6 Dual/Quad
* imxv4l2videosrc fixes and enhancements:
* fixes to interlacing support (incl. workarounds for analog TV input)
* remove format restriction in get_caps function
this removes the limitation on I420 formats
* simplified determination of fps (necessary due to driver limitations)
* eglvivsink: wayland: Do not commit before buffers are swapped
This fixes eglSwapBuffer swaps with damaged frames
* Documentation additions
Adds GPU memory leak notess to the FAQ
* vpu: encoder: Expose motion estimation range as property
* vpu: decoder: Drop output frame if its buffer cannot be allocated
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/cec4c47
Tested with the following commands on i.MX6Q (IPU):
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxeglvivsink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Upgrade to FW v3.1.1_r46072
- v3.1.1_r46070 plus 2 patches 391/392
- FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
erroneous H264 bitstream
- FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
- Change to the format of Linux coda driver firmware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
Implicitly tested through gstreamer as the plugin relies on it:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is a 1.1.0_ga release, and a 1.1.1_patch release. The
patch release appears to be only for i.MX6UL, so it is bumped
to 1.1.1_patch, while the other are 1.1.0_ga.
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.org/results/d75/d7500f7e063b94e9991bacfd1df9fa5aa1967db0/http://autobuild.buildroot.org/results/f48/f485ee75ec4c9b87f17b8b8dc1898590045474b4/
For some odd reason, the file on the autobuilder ended up getting prefixed
by these 7 bytes:
00000000 31 62 30 31 61 0d 0a 1f 8b 08 00 00 00 00 00 00 |1b01a...........|
And suffixed by these 7 bytes:
0001b020 00 0d 0a 30 0d 0a 0d 0a
Which then caused gzip to fail to extract it. It is not clear to me how this
could happen (Github glitz? It looks suspiciously like HTTP/1.1 chunked
encoding going wrong, E.G. 0x1b01a = 110618 = tarball size) - but adding a
.hash file fixes it as the corruption gets detected and we fall back to our
s.b.o mirror.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches and giterize/rebase the other ones.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove html and txt documentation from the rootfs as they unlikely to be
needed.
[Peter: use xargs instead of GNU extensions as suggested by Yann]
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-7913: The print_option function in dhcp-common.c in dhcpcd
through 6.10.2 misinterprets the return value of the snprintf function, which
allows remote DHCP servers to execute arbitrary code or cause a denial of
service (memory corruption) via a crafted message.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was forgotten when the patch to Makefile.am was removed in 779676f62d
(imlib2: security bump to version 1.4.8).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove fetching upstream patch to fix build with GCC 6 - it's included in the
update.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was forgotten when the patch to configure.ac was removed in 218938e470
(opus: bump version to 1.1.1).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_QT_OPENGL_ES was moved to a choice option. This option kind
can apparently not be selected by other packages. Therefore this patch
introduces a new Kconfig option BR2_PACKAGE_QT_OPENGL which takes care
of OpenGL support as such, BR2_PACKAGE_QT_OPENGL_NONE is not needed
anymore now. The choice options are now only used to determine the
type of OpenGL support.
This patch contains the necessary preparation to fix a build error in
the qwt package.
[Peter: fix QT_OPENGL dependencies to match options]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wojciech Nizinski <niziak@spox.org>
[Thomas:
- Add missing dependency on wchar
- Rewrap Config.in help text
- Add missing "depends on BR2_USE_MMU" on the comment about wchar
dependency.
- Switch to upstream 0.7.0 version
- Replace the hook calling autogen.sh by a hook simply creating the m4
directory, which is what prevented <pkg>_AUTORECONF from working.
- Add patch to fix build with uClibc.
- Split in separate patches the addition of the host variants of
libarchive and libsodium.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will be needed for the host variant of the fwup package. We enable
zlib support since host-fwup needs it. All other features are explicitly
disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX specific kernel headers are not a hard dependency. Quoting README.md:
Without [--kernel-headers], the [ipu.h] header is not found, and elements
using the IPU will not be built.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add alsa-lib as optional dependency to get a reproducable build.
Without this patch configure logs:
checking for ALSA... no
configure: WARNING: ALSA library not available
After this patch alsa-lib was built before libv4l:
checking for ALSA... yes
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default position independent executables (PIE) are generated
when building U-Boot elf target. MetaWare debugger doesn't support
PIE (position-independent executable).
In order to allow MDB load and run U-Boot elf, we need to do a
special trick, called "mdbtrick".
This special build target is used to fake generated U-Boot elf by:
1. Reset PIE flag in ELF header
2. Strip all debug information from elf
Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support to compile Xen 4.6 and Xen tools for arm32 and arm64
targets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas:
- Remove all "select" from the main Xen option, since the hypervisor
can build fine without any additional library. The dependencies have
been moved to the "tools" sub-option.
- Make sure that at least one of the sub-option is enabled by selecting
the hypervisor sub-option if the tools sub-option is not enabled.
- Add a Config.in comment about the dependencies of the Xen tools.
- Add missing dependency on argp-standalone in the .mk file.
- Simplify the handling of XEN_INSTALL_TARGET_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add basic support for LinkSprite pcDuino board series
including pcDuino, pcDuino-Lite, pcDuino-Lite-WiFi.
Tested on pcDuino-Lite-WiFi.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 5f37843a (php.ini: set date.timezone), the configured timezone was
used as the default for PHP.
However, BR2_TARGET_LOCALTIME is a string, so is quoted, so it is never
empty, so the check for emptynessnever matches.
Fix that by q-stripping the value before testing it. Note however that
we do not q-strip it before storing it in the php.ini file, because it
has to be q-stripped in there.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A Linux user-space application to modify the Intel Extensible Firmware
Interface (EFI) Boot Manager. This application can create and destroy
boot entries, change the boot order, change the next running boot
option, and more.
The only issue found was that it was trying to include headers from the
host, so $(STAGING_DIR) has been prepended to the include path so that
the package finds the right headers.
efibootmgr depends on the libraries provided by efivar.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- change the "depends on" for efivar to a "select", and propagate the
relevant dependencies.
- the license is GPLv2+, not GPLv2.
- move the Makefile tweak to a post-patch hook rather than doing it as
part of the build step.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar contains tools and libraries to manipulate EFI variables.
This package has some restrictions to build. It needs uchar.h which
apparently does not come in uClibc, and it also needs
__bswap_constant_*() definitions which are only present in glibc.
So, this package was limited to build with glibc toolchains.
Although it probably makes sense mostly on x86, x86-64 and aarch64
architectures, there are no architecture specific limitations which
would prevent it to build for other architectures, so this restriction
was not imposed. This package has been build-tested additionaly on many
architectures which support glibc, such as mips, MicroBlaze, sparc64,
ppc64. There were some build flag issues found when building to some of
these some architectures, although the flags can be also added in the
general case, so they were added by default.
It has also been found that in some host systems it failed to build due
to not generating the .pc files. This has been tracked to the use of
make 3.81, so a patch was prepared for it and was submitted upstream.
There's also a dependency on the linux/nvme.h header, which is somewhat
conturbed, as it has appeared in user space linux headers 3.12 and in
4.4 it was renamed. This has been solved by restricting it to build with
linux headers >= 3.12 and a patch from upstream was picked which fixes
it for linux headers >= 4.4.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- Pass TARGET_LDFLAGS in LDFLAGS.
- Pass -shared-libgcc only on Microblaze.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Domoticz is a Home Automation System that lets you monitor and
configure various devices like: Lights, Switches, various
sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water
and much more. Notifications/Alerts can be sent to any mobile device.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an upstream qtbase commit that fixes the detection of
ALSA versions >= 1.1.x, as we have in Buildroot.
Signed-off-by: Jiri Novotny <jiri.novotny@logicelements.cz>
[Thomas: change to use the upstream commit directly, using <pkg>_PATCH.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The endianess of the Linux kernel should be based on BR2_ENDIAN, so that
it is automatically built for the right endianness.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Thomas: tweak commit message, add comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some wireless drivers report IW_MODE_AUTO instead of IW_MODE_MANAGED.
NetworkManager 1.0.12 introduced a change, which makes it skip such
interfaces.
This patch is a backport of a workaround for this problem from the
NetworkManager upstream.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
[Thomas: add reference to the upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Damien Lanson <damien@kal-host.com>
[Thomas:
- Rewrap Config.in help text.
- Add missing new line at the end of the Config.in help text.
- Use 80 # signs for the .mk file header.
- Use <pkg>_SUBDIR = log4cpp instead of moving things around during the
extract step.
- Fix typo in the license (it's LGPL, not GLPL), and make it LGPLv2.1+,
since it's what the HTML documentation says.
- In addition to removing the log4cpp-config script from the target,
tweak the variant installed in staging so that it behaves properly
for cross-compilation. Unfortunately, the <pkg>_CONFIG_SCRIPTS
generic mechanism doesn't work for this config script.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.6.2 contains commit 63d0430f991314 ("drm/imx: Match
imx-ipuv3-crtc components using device node in platform data")
that fixes IPUv3 probing, so bump to this kernel version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.6.2 contains commit 63d0430f991314 ("drm/imx: Match
imx-ipuv3-crtc components using device node in platform data")
that fixes IPUv3 probing, so bump to this kernel version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch:
* bumps openjpeg to version 2.1
* changes download location to github
* converts the package to use cmake
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
ESNET-SECADV-2016-0001 - A malicious process can connect to an iperf3
server and, by sending a malformed message on the control channel,
corrupt the server process's heap area. This can lead to a crash (and a
denial of service), or theoretically a remote code execution as the user
running the iperf3 server. A malicious iperf3 server could potentially
mount a similar attack on an iperf3 client.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4971 - By default, on server redirects to a FTP resource, use
the original URL to get the local file name.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- disable the tracing mechanism using --disable-vt, since it was
causing the build failure. Avoids the need for a patch.
- remove the option to pass arbitrary config options.
- specify the license as being BSD-3c instead of just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fetch a patch from upstream to fix a build issue with GCC 6:
'''
In file included from /home/joerg/Development/git/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/include/c++/6.1.0/bits/stl_algo.h:59:0,
from /home/joerg/Development/git/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/include/c++/6.1.0/algorithm:62,
from ./src/queue/IdTable.hxx:25,
from ./src/queue/Queue.hxx:24,
from src/queue/Playlist.hxx:23,
from src/Partition.hxx:23,
from src/Instance.cxx:22:
/home/joerg/Development/git/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/include/c++/6.1.0/cstdlib:75:25: fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
'''
Bug report: https://bugs.musicpd.org/view.php?id=4524
Fetch from: aa5d05eaa4d482aa8f8df954335d0aba151eeff9
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
[Thomas:
- Adjust license: it is "GPLv2+ or BSD-2c" and not "GPLv2, BSD-2c"
- Add the COPYING file to the license files, since it indicates
explictly that the license is GPLv2+ or BSD-2c.
- Remove the --with-shared configure options, which doesn't exist.
- Use LIBCOAP_AUTORECONF = YES instead of calling the autogen.sh script
manually.
- Add patch to fix build with old gcc versions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a typo in commit
a890032596 ("package/fetchmail: fix *.pyc
compilation with python-3"), the post install target hook was in fact
not registered, and the build failure kept showing up.
This commit fixes the typo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils got disabled as a target package for aarch64 back in Buildroot
2012.11 (commit 660d16f4).
The default version 2.21.1 at the time didn't really support aarch64, as
shown by the autobuilder error reference in that commit.
binutils has now had support for aarch64 since 2.23, but was never
re-enabled for aarch64.
All of the binutils versions currently supported by Buildroot (oldest
being 2.24) support aarch64, so we can now enable it without any
restrictions.
This same patch also touches the dropwatch, lightning and oprofile
packages which all select binutils and had the 'depends on !aarch64' to
keep Kconfig consistent. They are now re-enabled for aarch64 as well.
They are changed in this same patch so that Kconfig is kept consistent
and doesn't end up having them disabled in a commit which only has the
binutils change applied.
lightning has other explicit arch dependencies so it is not actually yet
available in aarch64, but at least the dependency on !aarch64 because of
binutils is not needed anymore.
Everything has been build tested with Buildroot and external toolchains.
binutils and dropwatch work fine in a qemu target. oprofile doesn't seem
to be supported in the qemu aarch64 processor but builds fine and seems
to have some level of aarch64 support in the source, so there doesn't
seem to be a reason to keep it disabled in Kconfig.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 500de2598a, support for eglibc
was removed, but forgot to remove the corresponding hashes from the hash
file. This commit fixes this mistake.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new configuration for NXP i.MX51 EVK based on U-boot 2016.05
and kernel 4.6.1.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f1bc98f396 the CFG_BUILD_KERNEL_STACK
option wasn't set when the PCIe library interface is selected.
The build fail since the default choice "Link to Application" (which require
libpcap) is used.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5.6 2.5.0 YES OK (4)
arm_versatile 4.6.1 2.5.0 YES OK
arm_vexpress 4.6.1 2.5.0 YES OK
m68k_mcf5208 4.6.1 2.5.0 YES OK
m68k_q800 4.6.1 q800-v2.4.0 NO (3) OK
microblazebe 4.6.1 2.5.0 YES OK
microblazeel 4.6.1 2.5.0 YES OK
mips64el_malta 4.6.1 2.5.0 YES OK
mips64_malta 4.6.1 2.5.0 YES OK
mipsel_malta 4.6.1 2.5.0 YES OK
mips_malta 4.6.1 2.5.0 YES OK
ppc_g3beige 4.6.1 2.5.0 YES OK
ppc_mpc8544ds 4.6.1 2.5.0 YES OK
ppc_virtex_ml507 4.6.1 2.5.0 NO OK
ppc64_pseries 4.6.1 2.5.0 YES OK
sh4 4.6.1 2.5.0 YES OK
sh4eb 4.6.1 2.5.0 NO (1) OK
sparc_ss10 4.6.1 2.5.0 YES OK
sparc64_sun4u 4.6.1 2.5.0 YES OK
sparc_sun4u 4.6.1 2.5.0 YES OK
x86 4.6.1 2.5.0 YES OK
x86_64 4.6.1 2.5.0 YES OK
xtensa_lx60 4.6.1 2.6.0 YES OK (2)
xtensa_lx60_nommu 4.6.1 2.6.0 YES OK (2)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - Linux 4.5/4.6 doesn't work with older Qemu versions
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It now requires 3.12.x series headers so adjust the dependencies to
match.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
WNPA-SEC-2016-29 - The SPOOLS dissector could go into an infinite loop.
WNPA-SEC-2016-30 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-31 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-32 - The UMTS FP dissector could crash.
WNPA-SEC-2016-33 - Some USB dissectors could crash.
WNPA-SEC-2016-34 - The Toshiba file parser could crash.
WNPA-SEC-2016-35 - The CoSine file parser could crash.
WNPA-SEC-2016-36 - The NetScreen file parser could crash.
WNPA-SEC-2016-37 - The Ethernet dissector could crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only enabled on a subset of known-working architectures.
It fails to build on some archs, like blackfin.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- Add comment about the Blackfin exception.
- Propagate the Blackfin exception to the Config.in comment.
- Fix the license, it is the LGPLv2.1+ *with* the unRAR restriction.
- Use $(INSTALL) -D -m 0755 to install the binary instead of cp.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Code is otherwise compiled with sparcv9 optimization and
cannot be run on sparc32 (sparcv8) machine.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Codescape toolchain uses a sysroot layout that places them
side-by-side instead of nested like multilibs. A symlink is needed much
like for the nested sysroots which are handled in copy_toolchain_sysroot
but there is not enough information in there to determine whether the
sysroot layout was nested or side-by-side.
For the above reason plus the fact that this is the only toolchain
needing this, better to handle that symlink creation using a hook which
will be executed only when that toolchain is selected.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 9a1e9efe26.
Currently Codescape toolchains cannot be used to generate a big endian
root file system because the support for side by side sysroots is not
complete.
There is a patch [1] waiting in the queue which fixes the issue for the
current version of Codescape toolchains we have, but it will not work
for the next one that is coming. So, instead of messing more with the
toolchain infra I think it's better to handle these specific Codescape
toolchain's weirdness in hooks which won't affect others.
[1]: http://patchwork.ozlabs.org/patch/571708/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We directly running this script, so it should start with a sha-bang (not
sure why/how it works today...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix several issues regarding the support for Flat Image Trees (FIT).
- Add a patch to really allow turning FIT support on/off, which was not
possible due to bugs in the code and in the tools Makefile. This patch
has been sent upstream but not applied there, yet.
- Use independent options to control FIT support on host and target
packages.
- Subordinate FIT signature support to the activation of FIT support, in
the target package, not to mkimage installation.
- Add a dependence on the dtc utilities because mkimage needs it when
FIT is enabled; otherwise mkimage fails like this:
$ mkimage -f firmware.its firmware.im
sh: dtc: command not found
- Add BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT to the
Config.in.legacy file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When that was added (in 975e30b, fs/squashfs: fix image file
permissions), the reasons were not quite explicit.
We are now forcing the umask, and various tests have shown that the mode
on the generated image file are correct without the chmod.
Remove it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the squashfs image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the jffs2 image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases we need to escape make variables and pass them to
printf(1).
This is the case in our fs infra, where we want to shoe-horn the
commands to generate the filesystems in the fakeroot script, or the
devices, permissions and users tables to their respective files.
We currently do so by replacing $(sep) with the literal '\n' but that's
not enough. This does not protect against strings with an embedded '%'
or a backslash.
Add a new macro that properly escapes a string and calls printf(1), so
that we get the expected output.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that the uclibc-menuconfig rule was guarded behind
BR2_TOOLCHAIN_BUILDROOT, which is wrong since we can build
glibc or musl toolchains too...
This is de facto fixed by moving the help text to the uClibc package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all our internal packages provide actions that are prefixed
with their own names. This makes it obvious what package the action
refer to.
However, the help commands are really free-form. This means that
packages (and especially packages from a br2-external tree) may provide
completely arbitrary help text.
As such, all that text can get pretty easily mixed up, and it will be
very difficult to read.
Prefix each package-specific help text with the name of the package it
refers to. This generate a "make help" that looks like:
[...]
Package-specific:
<pkg> - Build and install <pkg> and all its dependencies
<pkg>-source - Only download the source files for <pkg>
<pkg>-extract - Extract <pkg> sources
<pkg>-patch - Apply patches to <pkg>
<pkg>-depends - Build <pkg>'s dependencies
<pkg>-configure - Build <pkg> up to the configure step
<pkg>-build - Build <pkg> up to the build step
<pkg>-graph-depends - Generate a graph of <pkg>'s dependencies
<pkg>-dirclean - Remove <pkg> build directory
<pkg>-reconfigure - Restart the build from the configure step
<pkg>-rebuild - Restart the build from the build step
busybox:
busybox-menuconfig - Run BusyBox menuconfig
busybox-nconfig - Run BusyBox nconfig
barebox:
barebox-menuconfig - Run barebox menuconfig
barebox-savedefconfig - Run barebox savedefconfig
linux:
linux-menuconfig - Run Linux kernel menuconfig
linux-savedefconfig - Run Linux kernel savedefconfig
linux-update-defconfig - Save the Linux configuration to the path specified
by BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
Documentation:
manual - build manual in all formats
manual-html - build manual in HTML
[...]
(Note: busybox, barebox, linux help will be converted in followup
commits, they are represented here as an example of what this patch
does look like.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a package-variable to store the package-specific make rules.
Although this variable would be seldom used, we still document it.
However, we make sure the documentation explicitly states that this
variable should not be used (if it needs to be, the submitter of a
package will be told so during reviews).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mplayer has optional support for mpg123, to get reproducable builds
add mpg123 as optional dependency.
Linked libraries without this patch:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/mplayer | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [librt.so.1]
0x0000000000000001 (NEEDED) Shared library: [libpthread.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libm.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Linked libraries after this patch:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/mplayer | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [librt.so.1]
0x0000000000000001 (NEEDED) Shared library: [libmpg123.so.0]
0x0000000000000001 (NEEDED) Shared library: [libpthread.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libm.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Like with many other optional libraries detection of mpg123 is broken if
--enable-mpg123 is passed to configure leading to a build error:
libmpcodecs/ad_mpg123.o: In function `set_format':
ad_mpg123.c:(.text+0x63): undefined reference to `mpg123_getformat'
libmpcodecs/ad_mpg123.o: In function `decode_a_bit':
ad_mpg123.c:(.text+0x1b6): undefined reference to `mpg123_feed'
ad_mpg123.c:(.text+0x20e): undefined reference to `mpg123_replace_buffer'
ad_mpg123.c:(.text+0x223): undefined reference to `mpg123_decode_frame_64'
ad_mpg123.c:(.text+0x275): undefined reference to `mpg123_strerror'
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently selected version of U-Boot fails to compile.
Dying words are:
gcc -g -O2 -I/home/zeta/buildroot/buildroot/output/host/usr/include -c -o env_embedded.o /home/zeta/buildroot/buildroot/output/build/uboot-2013.10/common/env_embedded.c
/home/zeta/buildroot/buildroot/output/build/uboot-2013.10/lib/crc32.c:14:20: fatal error: common.h: No such file or directory
compilation terminated.
Makefile:258: recipe for target 'crc32.o' failed
Since it's quite old, instead of trying to fix it, let's
just upgrade.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas: added host dosfstools to the defconfig, needed to build a SD
card image with genimage when a FAT partition is listed in the
genimage configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need for GNU make to run the testsuite.
The benefit is you can even try it on noMMU targets as
the script runs with busybox hush.
Parallel build of the testsuite seems to work well.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Build failed when "makeinfo" was missing on the build host.
This was happening because "makeinfo" is required to build .info targets
and make exited with error. The issue hadn't appeared before as there was
prebuilt documentation in ARC binutils tarballs, so no attempts had been
made to build docs.
Missing "makeinfo" only stops us from building docs
("missing" script already throws a warning on that regard).
Let's continue to build other targets.
Now exit code of the script called "missing" is checked.
The value 127 means that "makeinfo" is not available on the build host.
So when such value occurs, 0 is returned to the top level makefile.
Documentation is not being built but further build of binutils continues.
Fixes http://autobuild.buildroot.net/results/55c/55cd09a559016f4f252f0e4c27313b9806135cf4//
Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove upstream patches and rebase all remaining patches.
Disable PCIe MN library by default, it will be added in a follow up patch.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Latest uClibc-ng 1.0.15 release fixed open issues with
microblaze shared library and linuxthreads support.
gcc 4.9.3 and gcc 5.3.0 require a small patch.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have two choices for the server's version (1.18.3, and 1.14.7)
but the following patch will only apply for versions >= 1.17.2.
If 1.14.7 is selected the build will fail with the following error:
Applying 0001-modesettings-needs-dri2.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 2036
So move this patch to an appropriate version folder in the package's
directory. It should be good enough until this package provides more
versions >= 1.17.2.
Signed-off-by: Stanislas Bach <sbach@0g.re>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds CMA to the juno's default kernel config that is in
board/arm/juno. This is critical if the user decides to config video
resolution to 1920x1080.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two new sample defconfigs oriented towards real PC targets.
It adds two variants for BIOS and EFI boot strategy.
On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.
It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.
Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.
In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.
Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OMXplayer uses openMAX on the RPi to play videos with hardware
acceleration.
Compared to using a gstreamer pipe, OMXplayer uses a complete
"tunnel-mode", in which the video is piped (after demuxing) into the
hardware, all the way down to the display, whereas gstreamer composes
the video using the eglgles sink, which uses mem-to-mem copies.
So, when playing a locally-stored 1080p video, OMXplayer averages 20%
(with peaks up to ~30%, depending on the complexity of the video) CPU,
while gstreamer bursts up to 40+% when playing 720p and totally chokes
on a 1080p video; all on an non-overclocked RPi-1.
Note that we have to depend on rpi-userland. rpi-userland is a GLES/EGL
provider, so it can't be selected (as all providers of a virtual package
can't).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add a depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- remove useless 'depends on' on toolchain features, since we now
depend on bluez_utils/neard
- remove the QT5CONNECTIVITY_INSTALL_TARGET_QMLS variable, and directly
use QT5CONNECTIVITY_INSTALL_TARGET_BLUETOOTH_QMLS and
QT5CONNECTIVITY_INSTALL_TARGET_NFC_QMLS in
QT5CONNECTIVITY_INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the official upstream has not published any new tarball, they
have continued to update their Subversion repository with additional
changes. This commit therefore updates the vpnc package to a newer
version, using the Github repository that replicates the original
Subversion repository.
Since the update required some updates to the patches, we took this
opportunity to split them in more fine-grained changes, and document
them more properly. Consequently:
- The patch 0001 that fixes the Makefile gets split into 3 patches,
0001, 0002 and 0003, each for one specific issue.
- Patch 0002 to disable building the manpages gets changed into a
solution that is potentially upstreamable, and is now patch 0004.
- A new patch 0005 is added to specify a custom libgcrypt-config
path, since this tool is now used to know how to link with
libgcrypt.
- The SUSv3 function removal patch is now patch 0006, and gains a
better commit log.
Also, this vpnc version now depends on gnutls, which basically is a
better replacement for OpenSSL, whose support was not enabled by
default due to licensing issues (vpnc is under the GPL, which isn't
compatible with the OpenSSL license).
Patches have been submitted upstream:
http://lists.unix-ag.uni-kl.de/pipermail/vpnc-devel/2016-June/004186.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The V4L2 module of gst-plugins-good provides an extra option to allow
probing for extra devices at plugin load time. This will enable features
such as video conversion using the V4L2 M2M api
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change download location and rework dependencies, i.e.
select Python's zlib support and python-click package
and remove unneeded build-time dependencies.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With uClibc-ng 1.0.15 sparc support got context functions.
Tested with qemu-system-sparc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that uClibc-ng 1.0.15 is in use, we can reenable
this package as context functions are available.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linuxthreads support got reorganized.
LT.new is removed, LT.old is the default for
Linuxthreads.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They were differences against Das U-Boot versions 2015.07 and 2015.04.
Generating again helps to apply them with "git am".
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the descriptions of the knobs to install mkimage, mkenvimage,
dumpimage, fw_printenv and fw_setenv.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to enable GDB simulator support, so
it can be used to test some no-MMU systems.
Newer GDB Blackfin Simulator need a workaround for in-tree compile.
It doesn't break for older Buildroot supported GDB Blackfin
Simulator.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow multiple file names to be listed in
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, concatenating them in the order
listed.
This allows the bulk of the environment to be shared across multiple
boards using a common environment file with board-specific values
supplied in a secondary environment source file.
Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: adjust indentation in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ab74e09eb4 renamed the dtc host tool
provided by linux to linux-dtc to avoid clashes with the dtc host tool
provided by host-dtc.
However, external scripting may well rely on the existence of a device tree
compiler as $(HOST_DIR)/usr/bin/dtc, regardless of its source. Changing
these external scripts to use linux-dtc means that the scripts need to be
aware of the buildroot release they are working with, which is not very
nice.
Add a symlink dtc->linux-dtc when no $(HOST_DIR)/usr/bin/dtc is present.
When host-dtc is not enabled, the end result will be dtc and
linux-dtc representing the same thing.
When host-dtc is enabled, either it is build before linux and no symlink
is created at any time, or it is build after linux, and the 'install'
command in host-dtc will overwrite the symlink with a proper dtc. In both
cases, the end result will be dtc and linux-dtc representing a different
thing.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mtools calls install-info at 'make install' time if available after
installing the mtools info page - But as we don't use the info pages for
anything / remove in target-finalize, this is a waste of time and a
potential cause of build failures as reported on the list:
http://lists.busybox.net/pipermail/buildroot/2016-May/160604.html
So ensure configure doesn't find it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Many lines are not correctly wrapped to 72 column width, so rewrap them.
In addition, standardize all instances of ". " to ". ".
Signed-off-by: Martin Kelly <martin@surround.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-boot to the 2016.05 version and the kernel to 4.6.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mesa3d doesn't like the new compressed exception handling of the Code
Sourcery MIPS toolchain and it fails to compile with an error like this
one:
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/5.3.0/../../../../mips-linux-gnu/bin/ld:
../../../../src/mesa/.libs/libmesagallium.a(ir_to_mesa.o):
.eh_frame_entry not in order
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/5.3.0/../../../../mips-linux-gnu/bin/ld:
final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Using -mno-compact-eh fixes the problem.
Fixes:
http://autobuild.buildroot.net/results/3cd/3cd81c57c51c0963ee6f4d9b814989460bb35316/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: improve comment in code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-8872 - if the third to last entry was written on a FAT12
filesystem with an odd number of clusters, the second to last entry
would be corrupted. This corruption may also lead to invalid memory
accesses when the corrupted entry becomes out of bounds and is used
late.
CVE-2016-4804 - the variable used for storing the FAT size (in bytes)
was an unsigned int. Since the size in sectors read from the BPB was not
sufficiently checked, this could end up being zero after multiplying it
with the sector size while some offsets still stayed excessive.
Ultimately it would cause segfaults when accessing FAT entries for which
no memory was allocated.
Converted package to autotools infra to match upstream.
The install options are now removals, enabled compatibilty symlinks and
exec-prefix set to / to match previous install names/locations.
Accounted for optional udev usage.
Dropped musl compatibility patch since it's upstream.
Add upstream patch to keep sectors a multiple of sectors per track since
it makes mtools cranky.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 2a87b64 (toolchain-external: align library locations in target and
staging dir), copying the libraries from the sysroot to the target was
changed to a simple find-based solution.
To be sure that the staging directory was entered to find the libraries,
in case the variable was pointing to a symlink, the -L clause to find
was used.
However, that causes extraneous libraries to be copied over.
For example, a ct-ng toolchain would have this sysroot (e.g for an arm
32-bit toolchain):
.../sysroot/lib/
.../sysroot/lib32 -> lib
.../sysroot/lib64 -> lib
.../sysroot/usr/lib/
.../sysroot/usr/lib32 -> lib
.../sysroot/usr/lib64 -> lib
Which we would carry as-is to our own sysroot.
But then, in target, our skeleton creates the /lib/ and /usr/lib
directories, with the necessary lib32 or lib64 symlink pointing to it.
In this case, a lib32->lib symlink is created, but no lib64 symlink
since this is a 32-bit architecture.
To copy the required libraries from staging into target, we scan the
staging directory for all occurences of the required libraries, and copy
them over to target, keeping the same directory layout relative to the
sysroot.
For example:
.../sysroot/usr/lib/libfoo.so --> .../target/usr/lib/libfoo.so
.../sysroot/usr/lib32/libbar.so --> .../target/usr/lib32/libbar.so
.../sysroot/usr/lib64/libbuz.so --> .../target/usr/lib64/libbuz.so
So, when we copy over the libraries from our staging to the target
directory, the "find -L .../sysroot -name libblabla.so.*" would find
multiple instances of libblabla, each in the /usr/lib /usr/lib32 and
/usr/lib64 locations (they are all the exact same file, though).
Since we do have the /usr/lib32->lib symlink, all is OK (but there are
two copies going on, which could be avoided). However, since we do not
have the /usr/lib64->lib symlink, the /usr/lib64/ directory is created.
This was very difficult to observe, as no /lib64/ directory is created,
only the /usr/lib64/ one was. To top it off, this only happens with a
merged /usr, which does not seem like not a common case without systemd.
Since the reason to use -L was to be sure to enter our staging
directory, we just need to ensure that the path ends up with a slash, as
was already talked about in this thread:
http://lists.busybox.net/pipermail/buildroot/2016-April/159737.html
After further discussion, it turns out that the original patch came along
because of the confusion between output/staging (which is a symlink) and
$(STAGING_DIR) which expands to output/host/usr/<tupple>/sysroot (which is
never a symlink), so the symlink handling isn't really needed at all.
[Peter: drop description comment, extend description]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compilation triggers an ICE in gcc with gcc 4.9
../db/dist/../lock/lock_deadlock.c: In function '__lock_detect_rpmdb':
../db/dist/../lock/lock_deadlock.c:354:1: internal compiler error: Segmentation fault
}
^
using this defconfig
BR2_sh=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_RPM=y
Compiling rpm with gcc5 works fine using this defconfig:
BR2_sh=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_GCC_VERSION_5_X=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_RPM=y
This patch adds a dependency to gcc >= 5.x to fix
http://autobuild.buildroot.net/results/e4b/e4b7705e3e148755ae34d498c860a3b9b915e0b0/
[Peter: simpify kconfig, add comment explaining why]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Free software library that interfaces with selected Z-Wave PC
controllers, allowing anyone to create applications that manipulate and
respond to devices on a Z-Wave network, without requiring in-depth
knowledge of the Z-Wave protocol
[Peter: also pass DOXYGEN=, add _MAKE_OPTS and use for build+install]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves the handling of the "atomic stuff" in the libdrm
package. libdrm can either use the atomic intrinsics (4 byte variant)
when available, or otherwise can use libatomic_ops. Note that the
dependency on atomic operations is not from libdrm itself, but only
from some specific DRM drivers only.
Amongst other things, it fixes the build of the libdrm package on
SPARCv8, therefore fixing:
http://autobuild.buildroot.org/results/74dd29b5ea146c320fde80a87a2fc910de9b7f60/
This commit does a number of changes that are all related to each
other:
- Removes the dependency of the Intel DRM driver on
libatomic_ops. The Intel DRM driver builds perfectly fine without
libatomic_ops, as long as 4-byte variant __sync operations are
available, which is always the case on x86 and x86_84 (which are
the only architectures on which the Intel DRM driver can be
enabled).
- Adds an hidden Config.in boolean option
BR2_PACKAGE_LIBDRM_HAS_ATOMIC that allows DRM driver that need
atomic operation to know whether atomic support is available
(either through intrinsics or through libatomic_ops).
- Adds an hidden BR2_PACKAGE_LIBDRM_ENABLE_ATOMIC Config.in option
that DRM drivers that need atomic operation should select to ensure
that the relevant dependencies are selected. It simply selects
libatomic_ops if 4-byte atomic intrinsics are not available. We
could let each DRM driver do this, but having an intermediate
option avoids a bit of duplication.
- Adds a patch that defines AO_REQUIRE_CAS before including
<atomic_ops.h>. This is needed because libdrm uses the
AO_compare_and_swap_full() which is only provided on all
architectures when AO_REQUIRE_CAS is defined. The exact same fix
was done in the erlang package in commit
4a9df29424.
- Adds the dependency on libatomic_ops when the package is enabled,
and passes the necessary CFLAGS on SPARCv8 to make the thing build
properly. The same CFLAGS are passed in the nginx package and bdwgc
package.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is basically the same change as in 0515fe4566
("Makefile: pass host PKG_CONFIG_PATH at "make menuconfig" time"). That
commit made sure to pass host PKG_CONFIG_PATH when invoking Buildroot's
own menuconfig program. This change ensures that the same is true for
third party menuconfig programs (i.e. Linux, uClibc and Busybox).
This unbreaks "make {linux,uclibc}-menuconfig" for host platforms which
rely on PKG_CONFIG_PATH to find .pc files (e.g. NixOS). (When Busybox
updates to a more recent Kconfig snapshot, one that uses pkg-config to
find ncurses, "make busybox-menuconfig" will also start working.)
Tested on Ubuntu and NixOS:
$ make qemu_arm_versatile_defconfig
$ make linux-menuconfig
$ make
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package introduces batman-adv, a kernel module implementation of
the B.A.T.M.A.N. IV and V mesh network routing protocols.
While batman-adv exists in the mainline kernel tree, it can also be
built as an external out-of-tree module. This package adds the
flexibility to chose a more up to date version of the module than exists
in the official tree, and also allows for compilation against kernels
without batman-adv in-tree support.
https://www.open-mesh.org/projects/batman-adv/
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas:
- remove "default n", since it's the default
- fix indentation of Config.in help text
- license is GPLv2, not just GPL
- remove variable BATMAN_ADV_MAKE_OPTS, name it directly
BATMAN_ADV_MODULE_MAKE_OPTS as this is what is expected by the kernel
module infrastructure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
__P() is used for compatibility with old K&R C compilers. With
ANSI C this macro has no effect.
Unlike for util-linux and ipkg packages where it was easy to remove
each __P() macro, ipsec-tools use it all over the tree and require a
"big" patch to enable musl support.
Since upstream seems not verry active (last release 2014-02-27)
So, disable ipsec-tools with musl based toolchains.
This fixes a compilation error with musl libc because of undeclared
__P.
Fixes:
http://autobuild.buildroot.net/results/42242e3f4485b9e77a916e6fe480c83f70e024e4
While at it, reorder "depends on" and "select" lines in Config.in
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 5c67cb1d04 ("linux: use zImage by default on ARM") changed
the default kernel image, but missed to update Zynq defconfigs.
U-Boot on Zynq boards still loads uImage, so BR2_LINUX_KERNEL_UIMAGE
should be defined to generate uImage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be a little bit misleading to have no init system...
Add a comment that states the user has to provide his own init system,
either via a package or a rootfs overlay.
It is expected that such a user will know what to provide, so we don't
really need to specify that it should be /init or /sbin/init or any
arbitrary executable pointed to by the kernel command line "init=..."
or anything else...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed 0001-cmake-use-the-standard-CMake-flag-to-drive-the-share.patch,
a similar patch was committed upstream:
ea55c8b5c1
Also remove empty line from Config.in.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mplayer configure script tries to detect the capabilities of the CPU
used by probing the host CPU. This leads to compilation failures if the
target CPU has lesser features, like missing mmx support for
BR2_x86_i686=y:
Checking for CPU vendor ... GenuineIntel (6:58:9)
Checking for CPU type ... Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz
Checking for kernel support of sse ... yes
Checking for kernel support of sse2 ... yes
Checking for kernel support of sse3 ... yes
Checking for kernel support of ssse3 ... yes
Checking for kernel support of sse4_1 ... yes
Checking for kernel support of sse4_2 ... yes
Checking for kernel support of avx ... yes
For this patch I copied most of ffmpeg configure options for x86 CPUs
because mplayer contains its own copy of ffmpeg.
Fixes
http://autobuild.buildroot.net/results/c5a/c5a722607ec9797c317b63b0fd3235608a340c98/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, each python package (be it the python interpreter package
itself or external python modules) is responsible for compiling its
.py into .pyc files. Unfortunately, this is not ideal as some packages
only install .py files without compiling them into .pyc files. In this
case, if the Buildroot configuration specifies to keep only the .pyc
files, the .py files are removed and lost.
To address this, this commit changes the logic by making the
compilation of .pyc files a global operation: the python interpreter
packages register a target finalize hook that is in charge of
compiling all installed .py files.
The *.pyc generation on a per package basis is disabled in the
python-package infrastructure by passing the "--no-compile" option to
setup.py.
The *.pyc generation for the Python interpreter internal modules is
disabled through --disable-pyc-build configure option.
A small helper script is used to perform the compilation, the purpose
of this script is to abort the compilation process if one of the .py
file cannot be compiled. It has been provided by Samuel Martin and
integrated into this commit.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- rework for python 3.5
- integrate Samuel proposal that allows to detect compilation
failures.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumpds the version of python-pyftpdlib to fix a
byte-compilation problem occuring with Python 3. The current version of
pyftpdlib contained a file that had mistakenly been added to the
release, and which wasn't Python 3 compliant. The new 1.5.1 version has
been released specifically to address this problem, see:
https://github.com/giampaolo/pyftpdlib/issues/381
Until now, this wasn't causing any problem as a byte-compilation problem
was not a fatal failure. But upcoming commits will make it a fatal
failure, so it needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Samuel Martin, this commit adds the option
--no-run-if-empty xargs option to the "find ... | xargs ..." logic used
in the python and python3 target-finalize hooks to remove py/pyc/pyo
files. This ensures that the command doesn't fail if there are no files
matching the pattern.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently even if -pie flag is provided to LD dynamic relocations
won't be created. That in its turn will break U-Boot self-relocation
functionality.
This fix resolves mentioned problem.
Note as of today this is a sort of off-the-tree patch right from
our binutils guy but in coming day similar fix will be applied to
upstream binutils as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS architecture detection is not accurate and is always detected as
mips64 even if we are using mips64r2 or mips64r6. Due to that, ffmpeg's
build system will pass the -mips64 flag which will conflict with the
-march option that our toolchain wrapper uses, and it will fail to build
showing errors like this one:
error: '-mips64' conflicts with the other architecture options, which
specify a mips64r2 processor
This problem has been already fixed upstream, but we would need to
backport 17 patches plus some changes in the ffmpeg.mk file. This is too
much, so better to just disable ffmpeg for mips64r2 and mips64r6 for the
upcoming Buildroot release.
This commit can be reverted in the next ffmpeg's version bump.
Fixes:
http://autobuild.buildroot.net/results/7fd/7fd8187c0110cdcac622e667f4a81d2db84f11ef/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using double quotes around TARGET_CC/TARGET_CXX is mandatory, since
they are composed of several words when ccache support is enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set all file timestamps to prevent the go compiler from rebuilding any
built in packages when programs are built.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The go compiler's cgo support uses threads. If BR2_TOOLCHAIN_HAS_THREADS is
set, build in cgo support for any go programs that may need it. Note that
any target package needing cgo support must include
'depends on BR2_TOOLCHAIN_HAS_THREADS' in its config file.
Fixes build errors like these:
error: #warning requested reentrant code
http://autobuild.buildroot.net/results/42a8d07101d8d954511d1c884ecb66e8d861899e
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the newly added HOST_GO_TARGET_ENV variable to pickup the
correct go environment for package builds.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the convenience of package makefiles define the new
make variables HOST_GO_TOOLDIR and HOST_GO_TARGET_ENV.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The go build system doesn't have the notion of cross compiling, but just the
notion of architecture. When the host and target architectures are different
it expects to be given a target cross compiler in CC_FOR_TARGET. When the
architectures are the same it will use CC_FOR_TARGET for both host and target
compilation. To work around this limitation build and install a set of
compiler and tool binaries built with CC_FOR_TARGET set to the host compiler.
Also, the go build system is not compatible with ccache, so use
HOSTCC_NOCCACHE. See https://github.com/golang/go/issues/11685.
Fixes build errors like these:
host/usr/bin/go: No such file or directory
http://autobuild.buildroot.net/results/6664189a6f3a815978e8d0a1d7ef408ca47e2874/
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Gentoo wiki page is much more informative than the download directory.
This is the official homepage according to top level README.md.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lirc-tools package fails to build once in a while in the
autobuilders. Some quick analysis of the problematic Makefile.am has
revealed one issue. However, since the issue is difficult to
reproduce, we could only check that the new solution continue to work,
and we're not 100% sure it fixes the entire problem: only the
autobuilders can say, over time.
Supposedly fixes:
http://autobuild.buildroot.org/results/eb47d57de8182d25b1dacbf0ac3726ed20063d04/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Closes#8911
When the kernel passes single in the command line, this translates
into an init -s option that is suppose to drop into a shell after
the sysinit and before the runlevel.
So, in busybox this is hardcoded - but, in sysvinit using the
sysinit action for the rcS means that it will always be executed
even when trying to get into single user mode for repair.
This change should run rcS in all of the expected runlevels
1-5 and should achieve the desired result compared to the busybox
and still allow a single user shell to get started as expected
before running rcS.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:
http://roseapplepi.org/
The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch
0001-hidtest-dont-use-a-C-source-file-since-it-s-pure-C.patch in the
hidapi package needs to rename a file from .cpp to .c to avoid a
dependency on C++. This renaming currently uses the Git-way of
describing renames in patches. While this is interpreted properly by
recent enough versions of the 'patch' tool, it is ignored and not
understood by older versions of 'patch'. Due to this, with these older
versions of 'patch', the file is not renamed, and it causes a build
failure.
We fix this by not using the Git-like way of describing rename, but
rather using the old-style way of doing renames. It makes the patch
longer, but compatible with older versions of 'patch'.
Fixes:
http://autobuild.buildroot.org/results/d7509d9fdf8f86332a023358a740975f535eafef/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building an U-Boot image for the i.MX23 or i.MX28 target requires to run the
bootloaders 'mxsimage' tool on the host. As mxsimage needs unconditionally
OpenSSL, building U-Boot for those targets fails if it is not available on
the host:
tools/mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
#include <openssl/evp.h>
Add the required dependency 'host-openssl' to all the different U-Boot image
types used to build a bootloader image for an i.MX23/i.MX28 target.
Also pass HOST_CFLAGS and HOST_LDFLAGS to the U-Boot build process so the right
-I/-L options will be used to find OpenSSL.
Ported from the Armadeus project:
https://sourceforge.net/p/armadeus/mailman/message/33595402/
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
[Jörg: port to recent Buildroot version]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to some code imported from gnulib, the time package doesn't build
in static-only configurations. Indeed the gnulib code redefines the
error() and error_at_line() functions, which are also provided by the
C library. Since fixing the gnulib code is really difficult, let's
just disable this package for static-only builds.
Fixes:
http://autobuild.buildroot.org/results/a0e64faba69fa86755c693f575fb258a77e4e9d1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c45979c732 marked OProfile as not
available on the Xtensa architecture, due to the lack of memory
barrier operations. This commit does the same for the Microblaze
architecture, for the same reason, which allows to fix the following
autobuilder failure:
http://autobuild.buildroot.org/results/9a872ddc906e9d552d30762e849a1b537b4e5095/
It is worth mentioning that most likely Xtensa and Microblaze are
architectures implementing a strongly-ordered memory model, in which
case we could define the memory barriers as no-ops. But until someone
who actually cares about OProfile on Xtensa and Microblaze shows up,
it's probably better to disable the package on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-build-time help text currently looks like this:
usage: graph-build-time [-h] [--type GRAPH_TYPE] [--order GRAPH_ORDER]
[--alternate-colors] [--input OUTPUT] --output OUTPUT
Obviously, naming the parameter for --input as OUTPUT is not a very
good idea, so this commit fixes that to name it "INPUT", as expected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Og (introduced in GCC 4.8) lets you optimize for debugging experience,
which can be useful for when you want optimized code that is nonetheless
debuggable.
Signed-off-by: Martin Kelly <martin@surround.io>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2015-7995 - Fix for type confusion in preprocessing attributes
Also drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use of a merged /usr is not restricted to systemd anymore, thus the
current error message is misleading, as it only speaks about systemd.
Fix the message by just ditching the reference to systemd altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1856 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site
CVE-2016-1857 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's normally autodetected, which can lead to unexpected/unhandled
results.
configure checks for libdrm, libepoxy and wayland, however a proper
libxcomposite check is missing thus it can lead to build failure under
some odd conditions.
There's no autobuilder failure to quote here, however there's a mailing
list post that exemplifies this:
http://lists.busybox.net/pipermail/buildroot/2016-May/161793.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of flann in Buildroot fails to build with gcc 6.x,
with the following failure:
error: call of overloaded 'abs(flann::KDTreeIndex<flann::L2<float> >::ElementType)' is ambiguous
By bumping the upstream version one commit further, we get an upstream
fix that fixes the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The aarch64 Linaro toolchain source hash is not correct, probably due
to a copy/paste error. The new hash has been verified by downloading
the tarball, validating the signature, and computing the hash.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-treq selects python-pyopenssl, which depends on C++ support, but
this dependency was not propagated to python-treq, causing the following
kconfig warning:
warning: (BR2_PACKAGE_PYTHON_TREQ) selects BR2_PACKAGE_PYTHON_PYOPENSSL which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
This commit fixes that by adding the appropriate dependency.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-service-identity selects python-pyopenssl and python-pyasn, both
of which depend on C++ support, but this dependency was not propagated
to python-service-identity causing the following kconfig warning:
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYOPENSSL which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYASN which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYASN_MODULES which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
midori selects webkitgtk, and webkitgtk needs a glibc toolchain, but
midori did not propagate this dependency, causing the following kconfig
warning:
warning: (BR2_PACKAGE_MIDORI) selects BR2_PACKAGE_WEBKITGTK which has unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 && BR2_TOOLCHAIN_USES_GLIBC && BR2_PACKAGE_LIBGTK3 && BR2_PACKAGE_WEBKITGTK_ARCH_SUPPORTS)
Interestingly, the Config.in comment of the midori package already
mentionned the (e)glibc dependency, but the BR2_TOOLCHAIN_USES_GLIBC
dependency was not expressed (either on the comment or on the main
package option itself).
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aircrack-ng has some scripts (airmon-ng, airmon-zc) that use external
tools for their functionality. We don't select the corresponding
packages because some of the other aircrack-ng tools don't need these
at all.
Still, the user should be informed of this. So update the help text to
refer to all packages used by the scripts:
- ethtool
- iw
- rfkill
- util-linux for lspci and lsusb (script uses options not available in
busybox)
- wireless_tools for iwconfig and iwpriv
See also bug #8936
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: lipkegu@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated here [1], recent changes on the MIPS binutils sources have
made it necessary for GCC to pass the -msoft-float to the assembler. Due
to that, valgrind fails to build for MIPS soft-float when using a
version of binutils >= 2.25 because its using some hard-float
instructions.
However, we cannot just disable it for the soft-float and binutils >=
2.25 combination since external toolchains don't provide information
about the binutils version they use. So, instead, we simply disable it
for soft-float.
1: https://gcc.gnu.org/ml/gcc-patches/2014-08/msg00905.html
Fixes:
http://autobuild.buildroot.net/results/5f5/5f576c7f8d56058a19ed0e7ff4b1ec620bcafb65/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's --enable-glx rather than --enable-egl, both are automatic though.
Change the autoreconf comment to reflect that it's required for all
patches.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the makedev syntax documentation, one of the examples lacks the "mode"
value. This patch fixes that example.
Signed-off-by: Alan Yaniger <alan@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't enable SSP support on external toolchains just because they use
glibc or musl. Instead of that, make the external toolchains explictily
declare if they support SSP or not. And also add a check to detect SSP
support when using custom external toolchains.
For internal toolchains we always enable SSP support for glibc and musl.
Fixes:
http://autobuild.buildroot.net/results/ac7c9b3ad2e52abfe6b79a80045e4218eeb87175/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove uClibc-specific SSP check, since there is now a generic
check being done.
- send potential compilation errors caused by the SSP check to
oblivion, in order to avoid causing confusion for the user.
- add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is a backport from Python 3.5, so it is not needed
for Python 3.5.x environment.
Fix python-tornado dependecies, so that python-backports-abc
is only selected for Python 2.x.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Help lftp to find readline and zlib so it will not fail this way:
checking for Readline... no
configure: error: cannot find readline library, install readline-devel
package
checking if zlib is wanted... yes
checking for inflateEnd in -lz... no
checking zlib.h usability... no
checking zlib.h presence... no
checking for zlib.h... no
configure: error: cannot find -lz library, install zlib-devel package
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: group zlib/readline options into one definition of
LFTP_CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
v0.6 API offers some major additions, including:
* iio_device_set_kernel_buffers_counts
* iio_buffer_get_poll_fd
* iio_bufer_set_blocking_mode
* iio_buffer_push_partial
Signed-off-by: Matthew Fornero <mfornero@mathworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add new fuse2fs option and disable it for host-e2fsprogs to avoid
carrying over unused/unnecessary distro/host dependencies.
Move E2FSPROGS_DEPENDENCIES to the top to avoid nasty mistakes (like
resetting a previous conditional addition).
License file renamed from COPYING to NOTICE.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backporting an upstreamed patch in order to fix a build failure like
this one:
In file included from src/math/src/polyc.c:43:0:
src/math/src/poly.findroots.c: In function
'polyc_findroots_bairstow_recursion':
src/math/src/poly.findroots.c:305:9: error: non-floating-point argument
in call to function '__builtin_isnan'
if (isnan(du) || isnan(dv)) {
Upstream commit URL:
3055eb3da9
Fixes:
http://autobuild.buildroot.net/results/01d/01d7d4f34b256bcdf30b16180c015f146bd50e63/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: tweak patch format.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-0718 - The Expat XML parser mishandles certain kinds of
malformed input documents, resulting in buffer overflows during
processing and error reporting. The overflows can manifest as a
segmentation fault or as memory corruption during a parse operation. The
bugs allow for a denial of service attack in many applications by an
unauthenticated attacker, and could conceivably result in remote code
execution.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was added in 0dece985 to deal with kernel headers 4.5 -> 4.5.4
breakage. Unfortunately the fix in 4.5.5 and 4.6+ doesn't deal correctly
with this causing more build breakage, so we'd rather "break" for the
small range of 4.5.x versions broken than for the rest of time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pexpect contains one file, async.py, that is only meant to be used
with Python 3. Due to this, it fails to byte-compile with Python 2,
which will become a problem once we make byte-compilation failures
fatal failures that abort the build.
As suggested by upstream at
https://github.com/pexpect/pexpect/issues/290, we simply remove the
problematic file when building with Python 2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Plugin list for the package is split into 2 parts - dependencyless and
ones with external dependencies. The first list is kept sorted
alphabetically, but the second has entries without any particular order,
so keep it sorted as well.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change switches ARC tools to the most recent arc-2016.03
version.
ARC GNU tools of version arc-2016.03 bring some quite significant
changes like:
* Binutils v2.26+ (upstream commit id 202ac19 with additional ARC
* patches)
* GCC v4.8.5
* GDB 7.10
More about changes, improvements and fixes could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2016.03
Note in this change we're adding sha512 checksums for
both binutils and gcc tarballs fetched from GitHub.
Build and run-tested in nSIM for both ARC700 and ARC HS38.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of python-pygame in Buildroot does not
byte-compile properly with Python 3. Commit 22efec0b44da from upstream
fixes the problem, so we take this opportunity to bump the pygame
version.
Fixing byte-compilation is necessary as we will soon enable a
mechanism that aborts the build in case of error during the
byte-compilation process (while they are today considered as
warnings).
In order for the bump to work, we explicitly disable freetype support,
as the package doesn't handle the freetype dependency for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For its continuous integration tests, python-crossbar includes one .py
file that intentionally has a syntax error. Until now, this wasn't
causing any problem, but with the introduction of a Python
byte-compilation process that errors out when there is a failure, it
is going to become a problem.
We simply add a patch that removes the syntax error, as we don't care
about it in the context of Buildroot. The problem has been reported
upstream to see if a better fix is possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though we disable the build of .pyo files in the interpreter,
nothing prevents other packages to install them. Since we only want to
keep either .py or .pyc or both, let's add a target finalize hooks
that removes all .pyo files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add --no-run-if-empty option to xargs, as suggested by Samuel.]
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Since the bump of python3 to 3.5.x, the target finalize hooks
registered by the python3 have been changed a little bit. For the sake
of consistency, this commit aligns the target finalize hooks
registered by the python package so that they look the same as the
ones used by python3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The major changes in terms of Buildroot packaging are:
- Due to PEP488, Python no longer generates .pyc (unoptimized) and
.pyo (optimized) byte-code files. Instead, it generates <foo>.pyc,
<foo>.opt-1.pyc and <foo>.opt-2.pyc. Therefore, we removed the
--disable-pyo-build option and kept only the --disable-pyc-build
option, which completely disables building all .pyc files. In
addition, since the optimized .opt-X.pyc files don't work if the
corresponding un-optimized .pyc file is not present, we are for the
moment unconditionally removing the optimized ones (keeping both
the unoptimized and optimized ones doubles the required filesystem
size!). So basically we preserve the behavior we had before this
commit:
BR2_PACKAGE_PYTHON3_PY_ONLY -> only *.py
BR2_PACKAGE_PYTHON3_PYC_ONLY -> only non-optimized *.pyc
BR2_PACKAGE_PYTHON3_PY_PYC -> both the *.py and non-optimized *.pyc
To achieve this, the TARGET_FINALIZE_HOOKS are reworked:
PYTHON3_REMOVE_PY_FILES is responsible for removing *.py files in
the BR2_PACKAGE_PYTHON3_PYC_ONLY case.
PYTHON3_REMOVE_PYC_FILES is responsible for removing *.pyc files
in the BR2_PACKAGE_PYTHON3_PY_ONLY case.
PYTHON3_REMOVE_OPTIMIZED_PYC_FILES is responsible for removing the
optimized *.opt-1.pyc and *.opt-2.pyc files, which is done
unconditionally.
- The PEP3147 disabling patch had to be significantly reworked due to
the code having changed heavily. The code was moved into a
_bootstrap_external.py, which is a "frozen" Python module, i.e a
module generated into a .h file at compile time using the
_freeze_importlib program.
- Due to the above, we now need to regenerate importlib.h at build
time. Unfortunately, for the target Python _freeze_importlib is
built for the target, so we can't run it on the build machine. To
fix this, we copy the _freeze_importlib program from the
host-python in $(HOST_DIR), and then patch the target python to use
it. Since the same solution can be used for 'pgen', we do it, and
avoid having to touch the graminit.{c,h} files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set uClibc DODEBUG in case BR2_ENABLE_DEBUG is set.
Setting DODEBUG was removed with commit 70b7079d37
in Dec. 2013 because of build failures with the old uClibc (now replaced
with uClibc-ng), no build failure with raspberrypi3_defconfig and
BR2_ENABLE_DEBUG enabled.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the host system compiler is gcc-6, this patch is needed to build
Buildroot toolchain and cleanly apply on gcc version 4.8.x to 5.x (not
needed for 4.7.x series).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_BOOST_ARCH_SUPPORTS option was originally added in
commit feeab03fa6 to be able to disable
Boost on broken NIOSII CodeSourcery toolchains.
However, since then, the CodeSourcery toolchain has been updated, and
once the fenv problem is fixed, this NIOSII toolchain is capable of
building Boost.
Thanks to this we can completely get rid of the
BR2_PACKAGE_BOOST_ARCH_SUPPORTS symbol, from boost itself and from all
its reverse dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our musl support has now been around for quite some time, numerous
packages have been fixed (although admittedly not all). It's time to no
longer call our musl support "experimental": things are now expected to
be working with musl just like with the other two C libraries we
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have added support for the lastest binutils version 2.26,
it is time to remove the oldest version we currently support, 2.23, in
order to keep only 3 versions: 2.24, 2.25 and 2.26.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On ARC and Microblaze, a special GDB version is used, fetched from
Github in both cases. Now that we consider Github generated tarballs
to be stable, we can specify hashes for those versions, rather than
using the special "none" hash to skip the hash check.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that 7.11 has been added and 7.10 is the default version, let's
remove the old 7.8 release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
7.11 is around, 7.10 has already seen a point release, so it's time to
make 7.10 the default version for gdb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb 7.11 was released on February 2016, it's time to include it in
Buildroot, which this commit does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc-2.22 does not build with gcc 6.x. The first issues can be fixed
by:
- Using the same 0004-gcc6.patch as we're using with glibc 2.23 since
Buildroot commit ab8de336eb.
- Backport glibc commit 5542236837c5c41435f8282ec92799f480c36f18 to fix
strchr() build failure.
But then, there are some more failures caused by the fact that numerous
glibc files were not using modern prototypes in the function
definitions, causing build failures such as:
../sysdeps/unix/sysv/linux/dl-openat64.c:26:1: error: 'openat64' defined as variadic function without prototype [-Werror]
openat64 (dfd, file, oflag)
^~~~~~~~
In file included from ../include/fcntl.h:2:0,
from ../sysdeps/unix/sysv/linux/dl-openat64.c:21:
../io/fcntl.h:214:12: note: previous declaration of 'openat64' was here
extern int openat64 (int __fd, const char *__file, int __oflag, ...)
^~~~~~~~
This could be fixed by backporting glibc commit
9dd346ff431fc761f1b748bd4da8bb59f7652094, but this is a large commit,
touching a significant number of files. We probably don't want to take
this path, and instead making glibc 2.22 as not available with gcc 6.x
seems like the right course of action.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to patch 840-microblaze-enable-dwarf-eh-support.patch, gcc 6.x
does not build:
../../gcc/config/microblaze/microblaze.c: In function 'void microblaze_expand_epilogue()':
../../gcc/config/microblaze/microblaze.c:3046: error: 'gen_rtx_raw_REG' was not declared in this scope
This patch was originally added to gcc 4.9 to make it capable of
building glibc. However, this is no longer needed with gcc 6.x, which
builds glibc just fine.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to version 2016.05 and also remove patch
003-tools-env-bug-config-structs-must-be-defined-in-tool.patch, as it is
upstreamed now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With systemd, samba4 will need some special temporary files to be
created on each boot, as explained in:
packaging/systemd/README
Install the provided template file as configuration.
However, this is not enough, as even the log directory is a tmpfs in
the default Buildroot configuration, so we must also create the log
directory on each boot. Hence we append this to the template installed
above.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we need to bump openvpn to version 2.3.11 for security fixes
the time has come to remove the polarssl option.
Add legacy handling explaining the situation:
PolarSSL 1.2.x can coexist with mbedTLS 2.x+, but OpenVPN requires
PolarSSL/mbedTLS 1.3.x (the transition branch) >= 1.3.8 but doesn't
build/work with the 2.x series. And PolarSSL/mbedTLS 1.3.x can't coexist
with mbedTLS 2.x on the same target.
So, unfortunately, openssl is now the only option (until libressl
arrives) which means no more backend options in general.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The android-tools Config.in.host has some logic to ensure that at
least one of its sub-options is enabled. However, this logic
incorrectly uses the sub-option names from the *target* android-tools
package, while it should be using the ones from the *host*
android-tools package.
Fixes the following kconfig warning:
warning: (BR2_PACKAGE_HOST_ANDROID_TOOLS) selects BR2_PACKAGE_ANDROID_TOOLS_ADB which has unmet direct dependencies (BR2_PACKAGE_ANDROID_TOOLS && BR2_USE_MMU)
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fastboot sub-option of android-tools did not properly replicate the
dependency of libselinux, which it is selecting. Due to this, an invalid
configuration could be generated, with fastboot selected while thread
support is not available for example (and therefore libselinux is not
available). This problem was causing the following build failure:
http://autobuild.buildroot.net/results/21e45cee04fd983c85c6702595ee3f7ed8470931/
This is fixed by replicating the selinux dependencies in the fastboot
sub-option and adding the relevant Config.in comment.
In addition, the main android-tools option had some logic to make sure
at least one of its sub-option is enabled: adbd by default on systems
with MMU, and fastboot by default on systems without MMU (because
fastboot is the only part that builds on noMMU systems).
However, with the new dependencies in the fastboot sub-option, this
logic would have become a lot more complicated. Since fastboot is very
unlikely to be used on noMMU systems, we simply make the whole package
not available on noMMU systems.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 919c06c282 the calls to gcc always pass
through the toolchain wrapper and all gcc patches to support poisoning has been
removed.
Update the BR2_COMPILER_PARANOID_UNSAFE_PATH comment.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mesa3d DRI drivers can be enabled without support for libgl (for
example without x11). So make glmark2 gl (x11) support depend on
BR2_PACKAGE_HAS_LIBGL being present as well.
It doesn't exactly mean mesa3d providing libgl, but since we can't have
more than one libgl provider at the same time it's equivalent.
This is fallout from f1894ec957 which
enabled DRI drivers for non-xorg builds. Fixes:
http://autobuild.buildroot.net/results/174/1743ee5a340e5f4b1f8519e0b11eb196caa4f30e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quagga runs as the "quagga" user, but it also needs to modify files
in /etc and /var - config files, pid files and vty sockets for vtysh.
Tell the configure script the right folders to use, create the
user, fix the permissions, and then let systemd know (if needed).
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of hardcoding the genimage.cfg path, let's add a BOARD_DIR
variable to improve readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
turbolua fails to build when we have openssl selected, because it didn't
mention openssl in the dependency list.
Fix build failure by specifying openssl in dependency list when it is
selected.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use rsync with '--keep-dirlinks' option to prevent rootfs overlay to
overwrite /usr, /bin, /sbin and /lib links in case BR2_ROOTFS_MERGED_USR
option is enabled.
Steps to reproduce failure:
- enable BR2_ROOTFS_MERGED_USR
- mkdir some_path/rootfs-overlay/lib/firmware/some_file.txt
- enable BR2_ROOTFS_OVERLAY="some_path/rootfs-overlay"
- run 'make'
- 'target/lib' contains only the files from 'some_path/rootfs-overlay/lib' instead
of the original symlink 'lib -> usr/lib'.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The log_msg symbol conflict was fixed in libevdev commit e4c315fc1603 (Rename
symbols leaking from static library to avoid name clashes, 2014-08-18) that
was included in version 1.3 of libevdev. Remove the patch that used to fix the
issue of log_msg symbol conflict with libevedev, which is a direct dependency
of libinput.
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 919b4f9eab the internal symbol
LIB_EXTERNAL_LIBS was renamed TOOLCHAIN_EXTERNAL_LIBS but the find and
replace command also renamed BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS to
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS which doesn't exist.
So user provided libraries defined in BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
are not copied anymore to staging and target directories.
For example:
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS="libasan.* libubsan.*"
Simply revert this change by renaming
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS to BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix typo in config powerpc64 depends. Go language only supports 64 bit powerpc.
Also add BR2_powerpc64le to depends list.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To build programs that need cgo support the toolchain needs to
be available.
Cc: Christian Stewart <christian@paral.in>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas: add comment in the code about the toolchain dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
install -D creates the folder, so we don't need the mkdir command
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we put all source archives side-by-side in the same
directory.
Since we're about to also save individual patches that were applied
on those sources, we don't want to make that directory a complete
mess of unassorted files.
So, we install each source archive in its own sub-directory, where
we'll later store the patches too. Store that location in a variable,
so it can be re-used later on (to install patches in a future commit).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When preparing the legal-info, the source archives are copied in the
legal-info/ output directory. When the archives are big, it can take
quite a bit of time and unnecessarily uses disk space. When the
legal-info output directory is on the same filesystem as the BR2_DL_DIR,
we can easily reduce copy time and disk usage by just using hardlins
instead of copying. However, the BR2_DL_DIR may be on a different
filesystem, so we must fallback to copying in this case
Introduce a helper script that copies a source file into a destination
directory, by first attempting to hard-link, and falling back to a
plain copy in case the hardlink fails.
In case the destination already exists, it is forcibly removed first, to
avoid clobering any existing target file (and especially any hardlink to
it), since cp -f does not remove the destination file, but clobbers it.
In some situations, it will be necessary that the destination file is
named differently than the source, so if a third argument is specified,
it is treated as the basename of the destination file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change switches ARC tools to RC2 of the most recent arc-2016.03
version.
Essentially once final release is ready version will be bumped again.
ARC GNU tools of version arc-2016.03 bring some quite significant
changes like:
* Binutils v2.26+ (upstream commit id 202ac19 with additional ARC patches)
* GCC v4.8.5
* GDB 7.10
More about changes, improvements and fixes could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2016.03-rc2
Also in this change we realign custom Buildroot patches for binutils and
gcc for ARC tools. Looks like earlier most of arch-independent patches
for binutils and gcc were either unintentionally removed or not even
added in patch folders for ARC's binutils and gcc. Now arch-independent
patches for binutils-2.26 and gcc-4.8.5 were added in
package/{binutils|gcc}/arc-2016.03-rc2 folders.
Build and run-tested in nSIM for both ARC700 and ARC HS38.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 2f37ef48e8 ("configs/imx6ulevk: Use ext4 as filesystem type")
the rootfs type is ext4, so update the readme.txt accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1541 - heap-based buffer overflow vulnerability in the
zip_read_mac_metadata function in libarchive, a multi-format archive and
compression library, which may lead to the execution of arbitrary code
if a user or automated system is tricked into processing a specially
crafted ZIP file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kodi depends on egl/gles on arm, our Kconfig option BR2_PACKAGE_KODI_GL
reflects this, it depends on !BR2_arm.
This option is wrongly used in many Kodi addons needing OpenGL, they
can be compiled even if Kodi itself uses egl/gles. This patch changes
the dependency on BR2_PACKAGE_KODI_GL to BR2_PACKAGE_HAS_LIBGL.
Tested using this defconfig:
BR2_arm=y
BR2_cortex_a17=y
BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_SCREENSAVER_ASTEROIDS=y
BR2_PACKAGE_KODI_SCREENSAVER_ASTERWAVE=y
BR2_PACKAGE_KODI_SCREENSAVER_BIOGENESIS=y
BR2_PACKAGE_KODI_SCREENSAVER_CPBLOBS=y
BR2_PACKAGE_KODI_SCREENSAVER_CRYSTALMORPH=y
BR2_PACKAGE_KODI_SCREENSAVER_GREYNETIC=y
BR2_PACKAGE_KODI_SCREENSAVER_MATRIXTRAILS=y
BR2_PACKAGE_KODI_SCREENSAVER_PINGPONG=y
BR2_PACKAGE_KODI_SCREENSAVER_PLANESTATE=y
BR2_PACKAGE_KODI_SCREENSAVER_PYRO=y
BR2_PACKAGE_KODI_SCREENSAVER_RSXS=y
BR2_PACKAGE_KODI_SCREENSAVER_STARS=y
BR2_PACKAGE_KODI_VISUALISATION_FISHBMC=y
BR2_PACKAGE_KODI_VISUALISATION_FOUNTAIN=y
BR2_PACKAGE_KODI_VISUALISATION_GOOM=y
BR2_PACKAGE_KODI_VISUALISATION_SHADERTOY=y
BR2_PACKAGE_KODI_VISUALISATION_SPECTRUM=y
BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE=y
BR2_PACKAGE_KODI_VISUALISATION_WAVEFORM=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
$ grep PACKAGE_HAS_LIB .config
BR2_PACKAGE_HAS_LIBGL=y
BR2_PACKAGE_HAS_LIBEGL=y
BR2_PACKAGE_HAS_LIBGLES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
/home/bernd/buildroot/output/build/kodi-screensaver-asterwave-0dc2c48dadb100954eef823e7e3a5f502ce65b1e/src/Water.cpp:25:20:
fatal error: GL/glu.h: No such file or directory
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
Makefile:477: *** libplatform is in the dependency chain of
kodi-visualisation-shadertoy that has added it to its _DEPENDENCIES
variable without selecting it or depending on it from Config.in.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Various small changes to comments:
- shorten OpenGL info (Thomas)
- fix typos
- add full packages names when missing (Thomas)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable kernel drivers for networking and add a simple
busybox config with basic network tools.
Add kernel patch from Linux git to fix hush segfaults while
using signal handler.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
Fix GetNextToken() off by one error.
Check for buffer overflow in magick/draw.c/DrawStrokePolygon().
Remove support for internal ephemeral coder.
These are all related to the recent ImageTragick bundle that were
partially fixed in 6.9.3-10 as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changed upstream URL to project site clamav.net, the tarball for the
new version is not available on sourceforge.net anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It requires python and it's normally used at build time, hence since we
don't support toolchain in the target it really doesn't make much sense.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should better use the final U-boot version rather than the release
candidate one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the rpi-0, which is basically a rpi (model A+) in a
smaller form-factor.
This one does not have an ethernet port, so we just remove it from the
configuration (or we could use the existing rasbperrypi_defconfig and
suffer from a longer boot time because of the waiting for eth0).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although the current version of rpi-firmware we use is working just fine
on the rpi-zero, the latest firmware provides a DTB overlay to use the
USB OTG device in either host or slave modes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4553 - Cache Poisoning issue in HTTP Request handling
CVE-2016-4554 - Header Smuggling issue in HTTP Request processing
CVE-2016-4555 - Multiple Denial of Service issues in ESI Response
processing (client_side_request.cc)
CVE-2016-4556 - Multiple Denial of Service issues in ESI Response
processing (Esi.cc)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Romain Naour, commit
4d39ca1c2a ("toolchain-external: fix
installation for CodeSourcery AArch64 toolchain") has a small bug where
a post-install hook doing fixups in TARGET_DIR was registered as a
staging installation hook while it should have been registered as a
target installation hook. This commit fixes this inconsistency.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Golang has significant improvements to support for multiarch in later
versions. This bump is required to make many go programs functional
under arm64, for example.
Signed-off-by: Christian Stewart <christian@paral.in>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
* Update the .config file
* Update the help text:
- Lua support is not restricted to Lua 5.2
- U-Boot supports needs now BR2_PACKAGE_UBOOT_TOOLS additionally
* Remove comment about bundled lsqlite3, it has been removed.
* Remove upstream patches:
- "Kbuild: Fix link error for CONFIG_UBOUT and missing libz" [1]
- "Kbuild: Link with GCC instead of LD" [2]
* Add patch from upstream:
- "Fix build without MTD support" [3]
* Add optional dependency for libarchive
* Add optional dependency for uboot-tools
[1] 5a5ef5909f
[2] f26577423e
[3] 69c0e66994
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add host-pkgconf in the dependency when Lua is enabled, as it
is used to find Lua.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The xorg server is somewhat sensitive to certain gcc versions combined
with -Os, particularly for ARM and MIPS, typically in the form of the
following symptom/error:
(EE) Segmentation fault at address 0x0
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
Force -O2 to work around this problem - for a target rootfs that uses
X11 the tradeoff is minimal since a sample/test image for qemu vexpress
with X11 + xinit + xterm + twm + xclock + gtk2 with demos is 60+ MB.
And it's less complicated than trying to find all of the bad
combinations.
Fixes bug #8436.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add comment in .mk file, add reference to bug.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox provides an option to embed a custom environment image into
barebox binary. This image will be used, when the environment found in
the environment sector is invalid. Both embedded and external images
can be used together, so having both options at the same time is
justified.
This patch sets barebox Kconfig option CONFIG_DEFAULT_ENVIRONMENT_PATH
to user specified path. This way one can use such BR's variables like
BR2_EXTERNAL, TOPDIR etc. to provide paths to custom environment
folders.
Cc: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ngx_http_spdy_module has been superseded by the ngx_http_v2_module
so BR2_PACKAGE_NGINX_HTTP_SPDY_MODULE has changed to
BR2_PACKAGE_NGINX_HTTP_V2_MODULE
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: rewrap Config.in.legacy help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using systemd nginx fails to start with the error
/usr/bin/mkdir: invalid option -- 't'
This is due to a missing space before the semicolon in nginx.service.
For systemd to handle multiple commands in ExecStartPre it requires the
semicolon to be a separate word or the use of multiple ExecStartPre.
This commit splits the multiple commands into two ExecStartPre lines
which fixes the error and improves readability.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The used U-Boot version (2014.01) isn't too happy with newer (>= 2.25)
binutils versions, so keep it locked down until the config is updated
for a newer version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The used U-Boot version (2014.04) isn't too happy with newer (>= 2.25)
binutils versions, so keep it locked down until the config is updated
for a newer version.
U-Boot 2016.03 in fact does work for mpc8315erdb - however it doesn't
yet support SPL which is necessary for NAND boot and would be a massive
defconfig revamp switching to NOR.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Results table:
Defconfig Kernel Qemu Network Status
------------------------------------------------------------------
aarch64_virt 4.5.3 2.5.0 YES OK
arm_versatile 4.5.3 2.5.0 YES OK
arm_vexpress 4.5.3 2.5.0 YES OK
m68k_mcf5208 4.5.3 2.5.0 NO SO-SO (3)
m68k_q800 4.5.3 q800-v2.4.0 NO (4) OK
microblazebe 4.5.3 2.5.0 YES OK
microblazeel 4.5.3 2.5.0 YES OK
mips64el_malta 4.5.3 2.5.0 YES OK
mips64_malta 4.5.3 2.5.0 YES OK
mipsel_malta 4.5.3 2.5.0 YES OK
mips_malta 4.5.3 2.5.0 YES OK
ppc_g3beige 4.5.3 2.5.0 YES OK
ppc_mpc8544ds 4.5.3 2.5.0 YES OK
ppc_virtex_ml507 4.5.3 2.5.0 NO OK
ppc64_pseries 4.5.3 2.5.0 YES OK
sh4 4.5.3 2.5.0 YES OK
sh4eb 4.5.3 2.5.0 NO (1) OK
sparc_ss10 4.5.3 2.5.0 YES OK
sparc64_sun4u 4.5.3 2.5.0 YES OK
sparc_sun4u 4.5.3 2.5.0 YES OK
x86 4.5.3 2.5.0 YES OK
x86_64 4.5.3 2.5.0 YES OK
xtensa_lx60 4.4.9 2.5.0 YES (2) OK
xtensa_lx60_nommu 4.4.9 2.5.0 YES (2) OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5
(3) - It boots, you can login, but apps exit/crash often
(4) - There's a network interface, but enabling it in qemu fails
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for ARM was changed to zImage in 5c67cb1d, however the
sh4/sh4eb sample configs were updated to switch to uImage in error,
hence end up building uImage which doesn't work with Qemu.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: fix commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
u-boot-dtb.img only gets built by default (all target) if
CONFIG_OF_SEPARATE _AND_ CONFIG_SPL_FRAMEWORK are enabled.
Certain SoCs (E.G. Action Semi S500) use a proprietary first level
bootloader instead of u-boot SPL, but still use u-boot-dtb.img as the first
level bootloader parses the uImage header for size/loadaddr.
Ensure u-boot-dtb.img gets built if enabled by explicitly listing it as a
u-boot make target (next to all) to support such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin was moved from -bad to -good so remove the option.
Support in -good was added via 301e8ffb.
Add legacy entry to notify users of this, however we can't automatically
select the good variant since good might be disabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin was moved from -bad to -ugly so remove the option.
Support in -ugly was added via 30cde9a3.
Add legacy entry to notify users of this, however we can't automatically
select the ugly variant since ugly might be disabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using 'yes "" | make oldconfig' to regenerate a .config file from an
existing defconfig does not work reliably in all cases. Specifically, it
does not work well with tristate choice entries.
The correct way to do it is to use 'make olddefconfig', but this target
is not supported in projects that use an old version of kconfig. As
most projects do not use tristate entries, there is no need for them to
upgrade.
'oldnoconfig' is an alias for 'olddefconfig', but it also is the only
name for this target between Linux versions 2.6.36 and 3.6.
Check which targets are supported by the current project, and use the
appropriate method to regenerate the .config file.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2088 - Duplicate EDNS COOKIE options in a response could
trigger an assertion failure.
Drop libressl support patch since it's upstream now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Packages installed for the host should have their prefix set to
$(HOST_DIR)/usr, and therefore not use DESTDIR at installation time.
Using PREFIX=/usr DESTDIR=$(HOST_DIR) is wrong, and leads for example to
luajit.pc containing prefix=/usr, which means pkg-config returns
incorrect results for host-luajit.
This patch fixes the luajit package to conform to this rule.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building crda with GCC 6 fails because of all compiler warnings are treated as
errors. Disable the compiler option '-Werror':
keys-gcrypt.c:94:32: error: ‘keys’ defined but not used [-Werror=unused-const-variable=]
static const struct key_params keys[] = {
^~~~
cc1: all warnings being treated as errors
Add a patch to drop '-Werror' from CFLAGS.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC 6 defaults to -std=gnu++14 instead of -std=gnu++98. The C++11 standard does
not allow "narrowing conversions" which is why building fdk-aac with GCC 6
fails:
libAACenc/src/aacEnc_rom.cpp:661:1: error: narrowing conversion of '2180108801u' from 'unsigned int' to 'FIXP_DBL {aka long int}' inside { } [-Wnarrowing]
Use '-std=gnu++98' as suggested by "Porting to GCC 6" [1].
[1] https://gcc.gnu.org/gcc-6/porting_to.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It already includes the fixes for CVE-2016-3994 and CVE-2011-5326 so
drop the patches, and additionally fixes:
CVE-2016-4024 - integer overflow in imlib2, which result in insufficient
heap allocation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Syslinux uses the host version of gcc to build to bootloader. On systems
with gcc 5.3, this results in a bootloader that hangs. This issue has
been addressed in upstream syslinux, but an official release has not
been made yet. This commit adds the upstream patch to fix the issue.
Most likely fixes bug #8866.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop patches applied upstream:
- 0001: notify: Don't use constexpr on Haiku
- 0002: notify: use "constexpr" only with glibc
Renumber remaining patches.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Includes numerous stablity and cleanup passes by ulli-kroll.
A hash file is also added, as it was missing before.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds support to build barebox with an auxiliary config.
This is useful for building an SPL (Secondary Program Loader) in
addition to the traditional TPL (Tertiary Program Loader). The
Beaglebone Black for example has two barebox configurations:
- am335x_defconfig builds the full barebox bootloader with device
tree
- am335x_mlo_defconfig builds the smaller MLO bootloader that loads
the full barebox bootloader from the eMMC or SD card.
Tested with the following defconfig:
# architecture
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_EABIHF=y
# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
# filesystem
BR2_PACKAGE_AM33X_CM3=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# bootloader
BR2_TARGET_BAREBOX=y
BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="am335x"
BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-am33xx-beaglebone.img"
BR2_TARGET_BAREBOX_CUSTOM_ENV=y
BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/beaglebone/barebox/barebox.env"
BR2_TARGET_BAREBOX_AUX=y
BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="am335x_mlo"
BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-am33xx-beaglebone-mlo.img"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
BR2_LINUX_KERNEL_ZIMAGE=y
# use the barebox built-in dtb
# BR2_LINUX_KERNEL_DTS_SUPPORT is not set
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes. In preparation for the auxiliary barebox build,
boot/barebox is split into two parts:
1. boot/barebox:
- The source and patch specification which are to be shared between the
barebox and barebox-aux packages.
- The barebox-package function and build logic.
2. boot/barebox/barebox:
- The package configuration, fragments, barebox env, etc.
- The actual barebox package make instantiation.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also drop BR2_PACKAGE_MIDORI_HTTPS option since it's now handled in the
webkitgtk package to satisfy MiniBrowser.
This version can't work with the older webkitgtk24 engine so it switches
to the new version.
Also make gcr support conditional on x11 support for libgtk3, it doesn't
work otherwise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the latest 2.12.x upstream stable branch.
Both 2.4.x and 2.12.x can live side-by-side, however only the latest
stable branch/releases are security-maintained, so add it unslotted.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package allows to build the fastboot and adb host utilities,
which can be used to interact with target devices implementing one of
these protocols.
The work behind the host utilities was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
The package also allows to build fastboot, adb and adbd daemon for the
target.
Regarding adbd, the target is required to have the FunctionFS USB Gadget
configuration. Then the following commands enable the use of adb:
# modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 \
iSerialNumber="buildroot"
# mkdir -p /dev/usb-ffs/adb
# mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
# adbd &
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- update on top of master.
- fix Config.in.host prompt, it should have been "host android-tools"
and not just "android-tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a locale directory is empty, shell code like "for langdir in
$$dir/*;" will loop once with langdir set to "path/to/dir/*", rather
than not looping at all, which would obviously be the desired
behavior.
Then "grep -qx $${langdir##*/}" ungoes two shell expansions (how?)
that transform the expression from "${langdir##*/}" to "*" to "list of
all files in buildroot root dir". Which is most certainly not what
this command was supposed to do.
If one of those files happens to be an 8GB flash image, grep consumes
all available memory and crashes trying to search it.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2167 - svnserve/sasl may authenticate users using the wrong
realm.
CVE-2016-2168 - Remotely triggerable DoS vulnerability in mod_authz_svn
during COPY/MOVE authorization check.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See https://nodejs.org/en/blog/release/v6.0.0/
The patches from 5.11.0 have been copied to 6.0.0 with the following
changes:
- Removed 0001-Remove-dependency-on-Python-bz2-module.patch,
0003-Fix-va_list-not-declared.patch and
0004-Fix-support-for-uClibc-ng.patch as all 3 have been fixed upstream
- Renamed 0002-gyp-force-link-command-to-use-CXX.patch to
0001-gyp-force-link-command-to-use-CXX.patch
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The VA-API acceleration requires one or more of the egl-drm, wayland
and/or x11 backends.
Since the egl-drm backend means LIBGL (X11) + EGL + DRM we'll handle it
later once the mesa3d libgl hidden knob is applied.
So for now we'll support wayland and x11 until that happens. Fixes:
http://autobuild.buildroot.net/results/4b9/4b98d0c2c0617715e77fb47b3d97037c6b7562ec/
[Peter: pass --disable-vaapi if libva isn't enabled,
invert wayland/X11 test as suggested by Thomas]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
Enhancements
------------
* Add support for NTP and command response rate limiting
* Add support for dropping root privileges on Mac OS X, FreeBSD, Solaris
* Add require and trust options for source selection
* Enable logchange by default (1 second threshold)
* Set RTC on Mac OS X with rtcsync directive
* Allow binding to NTP port after dropping root privileges on NetBSD
* Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port is disabled
* Resolve names in separate process when seccomp filter is enabled
* Replace old records in client log when memory limit is reached
* Don't reveal local time and synchronisation state in client packets
* Don't keep client sockets open for longer than necessary
* Ignore poll in KoD RATE packets as ntpd doesn't always set it correctly
* Warn when using keys shorter than 80 bits
* Add keygen command to generate random keys easily
* Add serverstats command to report NTP and command packet statistics
Bug fixes
---------
* Fix clock correction after making step on Mac OS X
* Fix building on Solaris
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Import patch from cryptopp upstream which fixes the gcc version checks
for using attribute deprecated with messages. Fixes build with host
gcc versions < 4.5.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- directly use the patch from upstream through <pkg>_PATCH rather
than storing it in package/cryptopp/, as it helps avoiding
line-endings problems: upstream has the source code with DOS line
endings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.
Patches kept with no changes:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch
Patches dropped because they have been merged upstream, or were
already upstream backports:
120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)
Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 302563539d fixes link with libm for all
targets linking against libyajl{,_s}. This makes patch "0001-cmake-uClibc-Fix
-missing-libm-for-tests" obsolete so it is safe to remove it.
Instead of renumbering all remaining patches the patch defined in YAJL_PATCH
is fetched and put intto the packages directory. Having all the patches in one
places makes the number and order of the patches applied to the package more
clear.
Align patch "0003-Link-with-shared-libyajl-in-a-shared-build" with commit
302563539d and remove linking with libm from
test/api/CMakeLists.txt.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some toolchain can't be used by Buildroot due to sysroot location
issue, so the $(ARCH)-linux-gnu-gcc -print-file-name=libc.a command
return only "libc.a"
This lead to an error during the header check version helper,
so these toolchains can't be imported into Buildroot.
cc1: fatal error: $PWD/libc.a/usr/include/linux/version.h: No such file or directory
compilation terminated.
support/scripts/check-kernel-headers.sh: line 38: /tmp/check-headers.4V5PPF: Permission denied
This issue happen with the first linaro 2015.11 [1] release and
CodeSourcery standard edition [2].
Here is the sysroot directory tree for linaro 2015.11:
$ ls libc/arm-linux-gnueabihf
etc lib sbin usr var
Here is the sysroot directory tree for CodeSourcery standard:
$ ls libc/sgxx-glibc
etc lib lib64 sbin usr var
Add a check to error out with an explicit error message
The check don't use toolchain_find_libc_a function directly since
"realpath -f" is used internally and return an absolute path.
[1] https://bugs.linaro.org/show_bug.cgi?id=1995#c7
[2] http://lists.busybox.net/pipermail/buildroot/2014-October/110696.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes an error not yet caught by autobuilders:
In file included from SaveSet.c:27:0:
Xfixesint.h:67:20: error: static declaration of '_XEatDataWords' follows non-static declaration
static inline void _XEatDataWords(Display *dpy, unsigned long n)
^
To reproduce use this defconfig:
BR2_powerpc64le=y
BR2_powerpc_power8=y
BR2_OPTIMIZE_3=y
BR2_GLIBC_VERSION_2_23=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_5_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFIXES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This revision fixes the build with recent kernel versions, which have
seen changes in the MMC framework breaking the build of external SDIO
drivers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of hardcoding again the version of the package when defining
WF111_SOURCE, this commit changes the WF111_VERSION so that it
contains the entire version number, and then modifies the WF111_SOURCE
definitions to use WF111_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When installing the WF111 modules, the module.* files generated during
the kernel compilation were overridden. This ended up having the wrong
information about the modules compiled in a given image (and only the
one about the WF111 module). This could be verified using the
"modprobe -l" command, with only the wf111 module showing up.
This patch fixes this by invoking the install_static target (which
will do both the build and installation) in WF111_INSTALL_TARGET_CMDS.
This way the files are not overridden but instead updated with the
additional WF111 informations.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target "$(LINUX_DIR)/.stamp_initramfs_rebuilt" uses its own
'cp' command, instead of LINUX_INSTALL_IMAGE/LINUX_INSTALL_IMAGES_CMDS
provided by (or updated with) commit 055e6162bb ("linux: don't build
appended DTB image in place and support multiple images") and thus is
not operating properly when APPENDED_DTB is used.
Indeed, it copies a single image, and does not copy the one with the DTB
appended.
This patch replaces the 'cp' command with LINUX_INSTALL_IMAGE which
handles APPENDED_DTB.
Fixes: 055e6162bb ("linux: don't build appended DTB image in place and
support multiple images")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glmark2 depends on mesa3d which already depends on BR2_INSTALL_LIBSTDCPP
and BR2_TOOLCHAIN_HAS_THREADS_NPTL, glmark2 does not depend on udev so
the comment stating all these dependencies is not needed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
WNPA-SEC-2016-19 - The NCP dissector could crash.
WNPA-SEC-2016-20 - TShark could crash due to a packet reassembly bug.
WNPA-SEC-2016-21 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-22 - The PKTC dissector could crash.
WNPA-SEC-2016-23 - The PKTC dissector could crash.
WNPA-SEC-2016-24 - The IAX2 dissector could go into an infinite loop.
WNPA-SEC-2016-25 - Wireshark and TShark could exhaust the stack.
WNPA-SEC-2016-26 - The GSM CBCH dissector could crash.
WNPA-SEC-2016-27 - MS-WSP dissector crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 638ea2d715, since it
breaks the build of busybox in many configurations, with the following
issues:
/bin/bash: : command not found
make[1]: Entering directory `/home/test/autobuild/instance-0/output/build/busybox-1.24.2'
[...]
GEN miscutils/Config.in
make[2]: *** No rule to make target `olddefconfig'. Stop.
make[1]: *** [olddefconfig] Error 2
make[1]: Leaving directory `/home/test/autobuild/instance-0/output/build/busybox-1.24.2'
make: *** [/home/test/autobuild/instance-0/output/build/busybox-1.24.2/.config] Error 1
make: Leaving directory `/home/test/autobuild/instance-0/buildroot'
See:
http://autobuild.buildroot.org/results/48481bb3531927be35cda3df57d02f02cec709aa/
for example.
A minimal configuration with just Busybox doesn't exhibit the problem,
but adding libtirpc in the configuration is enough to trigger the
problem, so the following defconfig allows to reproduce the issue:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2016.02-3-g762b7c9.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_7=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PACKAGE_LIBTIRPC=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far identical to the rpi2 one except for the dts file as the SW runs in
32bit mode.
[Peter: extend commit message]
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 7f1f9185e (system: default to devtmpfs for /dev) changed our default
for /dev handling, but didn't remove the explicit selection of devtmpfs from
a number of defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using 'yes "" | make oldconfig' to regenerate a .config file from an
existing defconfig does not work reliably in all cases. Specifically, it
does not work well with tristate choice entries.
The correct way to do it is to use 'make olddefconfig', but this target
is not supported in projects that use an old version of kconfig. As
most projects do not use tristate entries, there is no need for them to
upgrade.
'oldnoconfig' is an alias for 'olddefconfig', but it also is the only
name for this target between Linux versions 2.6.36 and 3.6.
Check which targets are supported by the current project, and use the
appropriate method to regenerate the .config file.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
[yann.morin.1998@free.fr: use a shell construct instead of makefile code]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions and new chipset
support as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It selects 7265 non-D firmware since they share the same firmware for
old kernel versions (rev 10 D-variant is the same as rev 10 non-D).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add a comment about the select in Config.in.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This avoids a lot of unnecessary complication with lots of revison
knobs for different chipsets and it's consequence when bumping
linux-firmware as well.
Users can purge unwanted versions from a post processing script if
target space is too constrained.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit will allow the LINUX_FIRMWARE_FILES variable to contain
wildcards, which will simplify the handling of firmware that are
available in numerous revisions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds another fix to the yajl build-system code.
This patch checks for isnan function in libc, and if not, it makes sure
libm is passed to the linker flags.
This change fixes build failure looking like:
make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/yajl-2.1.0'
[ 81%] Building C object example/CMakeFiles/parse_config.dir/parse_config.c.o
../yajl-2.1.0/lib/libyajl.so.2.1.0: undefined reference to `__isnan'
../yajl-2.1.0/lib/libyajl.so.2.1.0: undefined reference to `__isinf'
collect2: error: ld returned 1 exit status
make[3]: *** [verify/json_verify] Error 1
Fixes:
http://autobuild.buildroot.org/results/312/31268e4d20aa34bb90c09aa771b1923f979578ab/
and many others
Cc: Benoît Mauduit <bmauduit@beneth.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* package/busybox/udhcpc.script: Use $search instead of $domain if
that is defined.
Note that for this to work, not only has CONFIG_FEATURE_UDHCP_RFC3397
be enabled in Busybox' configuration but also the option has to be
requested using the "-O search" command-line option (one can set it in
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS, for instance).
[Peter: add comment with reference to rfc3359/option 119 for clarity]
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional changes: Extracts an argument to the inner-barebox-package
function to automatically determine the uppercase package name. This is needed
to support a 2nd config build. This results in the following renaming:
'BAREBOX' -> '$(1)'
All barebox packages are meant to be built from the same sources, so related
KConfig variables (origin, version and patch directory) are not extracted.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes: Introduces a barebox-package function towards
re-use by a 2nd config build.
Because the function is meant to be called from within a $(eval), all
instances of '$' has to be escaped. I.e. rename '$' -> '$$'.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support optional selection of the built image filename in a
multi-image barebox build. This makes it possible to specify which
image to pick in a multi-image barebox config such as the
am335x_defconfig.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
[Thomas:
- remove default "", since this is the default for string options
- rename the prompt from "Barebox image filename" to "Image filename"
- slightly improve the Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new address include more recent versions of stable releases.
Therefore, newer versions than 2.6.4 can be available when required.
Signed-off-by: Erdem MEYDANLI <erdem.meydanli@punica.com.tr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove upstream commited patch:
0002-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
- fix compile errror (missing include for va_list with uclibc-1.0.14):
0006-dtmerge-add-missing-include-for-va_list.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARM926 size delta +12 KB.
It's required for the upcoming mpv package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Forcibly disable wacom support since we haven't got a libwacom package
yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise since it's automatic it was left to random depending on the
libgtk3/libinput build order.
Also collapse all that whitespace.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version contains a patch that fixes the following crash:
make[1]: Entering directory `<...>/build/uclibc-1.0.14'
CC utils/getconf
*** buffer overflow detected ***: <...>/bin/elf2flt terminated
======= Backtrace: =========
/lib/x86_64-linux-gnu/libc.so.6(+0x7338f)[0x2ad3be5f738f]
/lib/x86_64-linux-gnu/libc.so.6(__fortify_fail+0x5c)[0x2ad3be68ec9c]
/lib/x86_64-linux-gnu/libc.so.6(+0x109b60)[0x2ad3be68db60]
/lib/x86_64-linux-gnu/libc.so.6(+0x109069)[0x2ad3be68d069]
/lib/x86_64-linux-gnu/libc.so.6(_IO_default_xsputn+0xbc)[0x2ad3be5ff70c]
/lib/x86_64-linux-gnu/libc.so.6(_IO_vfprintf+0xaef)[0x2ad3be5ce7df]
/lib/x86_64-linux-gnu/libc.so.6(__vsprintf_chk+0x84)[0x2ad3be68d0f4]
/lib/x86_64-linux-gnu/libc.so.6(__sprintf_chk+0x7d)[0x2ad3be68d04d]
<...>/bin/elf2flt[0x403cda]
<...>/bin/elf2flt[0x4030a4]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5)[0x2ad3be5a5ec5]
<...>/bin/elf2flt[0x403642]
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS, ARCH_SUBDIR is calculated but not
used, and can thus be removed. Since SYSROOT_DIR is only used for the
calculation of ARCH_SUBDIR, it can be removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We were not defining BR2_ARCH for two of the x86 subarchitecture,
which means the architecture part of the GNU_TARGET_NAME tuple was
empty, leading to weird build failures.
This commit fixes that by defining the appropriate values.
Fixes bug #8861.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps the rpi-firmware to a more recent version that
includes support for the Raspberry Pi 3.
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes icon lookups faster, though it's not strictly necessary.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: enclsoe the hook definition in the condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required to create the symbolic icons (RGBA/transparent) which some
apps like to use, like connman-gtk.
The added patch avoids the need for a full host-libgtk3 build which would
require host-libepoxy, host-mesa3d and a ton other deps.
And pull in host-librsvg so that we have the rsvg gdk-pixbuf loader
(plugin), otherwise scalable (svg) icons will error when trying to be
processed, like those provided by adwaita-icon-theme.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a download via a VCS method fails, Buildroot attempts the download
from the backup mirror (if any is set). Such a download is done with the
wget helper.
Given a package that has a .hash file for relase tarballs, which also
allows the user to use a random revision from a VCS, the normal download
wrapper will not check for hashes, on the assumption that maybe they are
not reproducible [*] (or user configurable).
However, when the download fails (for any reason: network error,
upstream removed the revision, old machine with incomplete set of CA
certificates...), the backup download now proceeds over with http (or
https) with the wget wrapper. The wget wrapper *always* checks for
hashes, and when a .hash file is present but no hash is found for the
download, this is considered an error.
However, when we download from the backup mirror for a main download that
should have been done with git/hq/svn/.., we in this situation have no hash
for the download. Thus, we should not fail on a missing hash for that
download. Same situation if a primary site is used.
Add a test for the site-method in the DOWNLOAD_INNER macro; if it was either
one of the VCS method, pass a one-off BR_NO_CHECK_HASH_FOR variable set to
contain the tarball to download.
Fixes issues like those reported by the Travis build bots:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123624879
[Peter: Move logic to beginning of DOWNLOAD_INNER so it also applies for BR2_PRIMARY_SITE]
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0001 that adjusts the Makefile to solve cross-compilation issues
does a lot of whitespace changes that are unnecessary. We remove all
those noisy changes to keep only the really interesting ones.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vpnc upstream project has not made any tarball release since many
years, but they have continued to update their Subversion
repository.
A Github repository synced with the Subversion repository now exists
at https://github.com/ndpgroup/vpnc, which is more practical to
generate patches and submit pull requests. For this reason, we move to
using this Github repository as the new source for the vpnc
package. The specific commit that we use corresponds to version 0.5.3
exactly.
All patches are re-formatted using Git.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flannel is a virtual network that gives a subnet to each host for use
with container runtimes.
Cc: Brandon Philips <brandon.philips@coreos.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Don't select BR2_PACKAGE_HOST_GO since this option was removed.
- Take into account the rename of BR2_PACKAGE_GO_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS.
- Rewrap Config.in help text, it was slightly too large.
- Don't use the github function (the link was anyway incorrect), but
instead a direct link to the tarball, since the tarballs are
uploaded by the maintainers.
- Update the hash accordingly.
- Use $() to reference make variables and not ${}.
- Call the go compiler from $(HOST_DIR)/usr/bin, rather than from
HOST_GO_ROOT.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new package 'go' which builds the host cross compiler and
libraries for the go programming language.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Put the computation of GO_GOARM inside the ifeq ($(BR2_arm),y)
condition rather than duplicating this condition.
- Remove the GO_GOARCH=unknown case, since there is no way to fall in
this case as only supported architectures can use host-go.
- Remove the GO_GOARM=unknown case, since we are sure that only
ARMv5/6/7 will use host-go.
- Rename HOST_GO_FINAL to HOST_GO_ROOT, since it's really the "root"
of the Go installation.
- Remove visible Config.in.host option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new package go-bootstrap which builds a bootstrap compiler for the
go programming language.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Rename GO_BOOTSTRAP_FINAL to HOST_GO_BOOTSTRAP_ROOT. Use the HOST_
prefix because this variable is specific to the host variant. And
it's not "final" at all, but rather the "root" of the Go Bootstrap
installation.
- Rename GO_BOOTSTRAP_MAKE_ENV to HOST_GO_BOOTSTRAP_MAKE_ENV, also to
have the HOST_ prefix because it's a host package.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
SQUID-2016:5 (CVE-2016-4051) - Buffer overflow in cachemgr.cgi
SQUID-2016:6 (CVE-2016-4052) - Multiple issues in ESI processing.
CVE-2016-4053 & CVE-2016-4054 which are part of SQUID-2016:6.
Switch to xz-compressed tarball as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When setting BR2_LINUX_KERNEL_LATEST_VERSION, it is hard for the user to
know that this version is subject to change in the future.
Explicit this in the Kconfig entry text.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fio can automatically detect and use libaio when available, so this
commit makes this optional dependency explicit.
Suggested by Charles <ckhardin@exablox.com> in bug #8851.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'backward' zone references entries from other zones (e.g. Pacific/*)
that have not yet been compiled, leading to missing links. To fix this,
take-over the zone list sort order from upstream 'tzdata' and also ensure
that make fails if zic terminates with a non-zero exit code.
Signed-off-by: Michel Marti <mma@objectxp.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for cbootimage host utility that is able to compile bct
files and generate flashable images out of a bct and an image for
tegra processors.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for the tegrarcm host utility that allows loading data to
tegra processors in recovery mode.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas: replace cryptopp cross-compilation fix by a more
autoconf-style solution, which has been submitted upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- put HOST_CRYPTOPP_EXTRACT_CMDS earlier in the file, since it's what
gets executed first.
- fix typo in the name of HOST_CRYPTOPP_MAKE_OPTS
- pass -fPIC in CXXFLAGS, since we're building a shared library
- just call "make shared" for the build and "make install" for the
installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commands like 'nvme list' require libudev but support for libudev is
decided at compile time, and in buildroot this is hard disabled.
Add a check for udev and if it is available build nvme with udev
support.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[Thomas:
- add comment to explain the LIBUDEV variable value
- use += instead of = to assign <pkg>_MAKE_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ucd-snmp/lmsensorsMib module uses lm-sensors, so ensure netsnmp is built
after lm-sensors if enabled.
As the list of mib modules to built is configured using a string option in
Kconfig, we cannot easily select lm-sensors from the netsnmp package - But
we can at least ensure it gets built before hand if enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.
* The 'openbox' windows manager is chosen because it's simple
and lightweigth.
* Basic X apps are enabled (such as xrandr, xterm), so we
can at least get a console and change video mode.
* ALSA default configuration is provided, so HDMI audio
works out-of-the-box.
* OpenGL is supported.
Tested on Minnoboard Turot (which is Minnowboard Max compatible).
[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit enables support for:
* HDMI audio
* Support for user-provided EDID firmware
(useful to workaround broken monitors)
* Evdev interface
* System V IPC (required by ALSA)
The options make the system more useful.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.
This commit does the following:
1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
and post-image.sh. These are identical to Minnowboard's.
2) Move Minnowboard MAX's linux config, and rename it.
It would be lovely to have a single kernel config file.
The kernel size penalty involved in adding support for
all the peripherals on both boards is small enough to
justify this.
However, the original Minnowboard has some GPIO buttons
that need to be registered by the kernel. This is not
upstreamed, and hence we need to use the yocto v3.8 kernel
to have this support.
3) Rename each grub config to grub-{board}.cfg.
4) Modify (the now unique) post-build script to use
a different grub config, according to the board.
5) Update both defconfigs, as per the above changes.
6) Finally, update the readme.txt.
[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:
$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch
it would look for
$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch
In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.
To fix, add the missing /
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although this package has been removed from the official release
packages since Qt5.6.0, it is still available for users to build
it from source. This is useful for platforms without GPU since its
successor (QtWebEngine) requires OpenGL support.
The package now matches the community-based meta-qt5 Yocto layer,
using the exact same revision of the qtwebkit source from github:
https://github.com/meta-qt5/meta-qt5/commit/e434995a
Here is the project source tree:
https://github.com/qtproject/qtwebkit
All the patches have been pulled from Yocto as well.
Since we are now using the source from the git repository, we need
to create an empty .git/ folder to force the headers re-generation.
https://github.com/meta-qt5/meta-qt5/blob/jethro/recipes-qt/qt5/qt5.inc#L33
Note that GPLv3 license option has been added with this release.
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: fix license to be LGPLv2.1+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no benefit on it being an autodep since it makes it harder to
find, and pppd can be selected directly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make graph-depends script opening the output file in text mode since
only ascii characters will be written.
This change fixes the following error occuring when the default host
python interpreter is python3:
make: Entering directory '/opt/buildroot'
Getting targets
Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
Traceback (most recent call last):
File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
outfile.write("digraph G {\n")
TypeError: a bytes-like object is required, not 'str'
Makefile:807: recipe for target 'graph-depends' failed
make[1]: *** [graph-depends] Error 1
Makefile:84: recipe for target '_all' failed
make: *** [_all] Error 2
make: Leaving directory '/opt/buildroot'
While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).
Therefore, just open the outfile in default (i.e. text) mode.
[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides the Universal Adapter user-space utility that is
used to receive commands from the Manufacturing Tool using the Freescale
UTP Protocol.
It requires a Freescale/NXP kernels whose configuration contains the
CONFIG_FSL_UTP option.
The /fat file is provided as a bootargs to the g_mass_storage driver
from U-Boot, see:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/
configs/mx6sabre_common.h?h=imx_v2015.04_3.14.52_1.1.0_ga#n116
Init scripts are provided so that the tool starts automatically at
bootup.
Tested on Nitrogen6_MAX + MFGTools.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- test return value from start-stop⁻daemon in init script, and
reindent the init script
- fix dependency of the comment
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the recent build issues have shown, gutenprint has optional libusb
support so ensure it is built after libusb if enabled for consistent
builds.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 84c825f8e8.
Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).
Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 0a767deba0.
Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).
Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to stm32f429_disco, this commit adds a configuration for the
Cortex-M4 based STM32F469 platform.
It requires a few kernel patches, which have already been submitted
upstream, as well as a small OpenOCD patch. Besides that, it re-uses
most of what has been added for the STM32F429 platform.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squash multiple patches from Lee Jones into one
- improve the readme.txt file
- sync the defconfig with the adaptations made to the stm32f429
configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.
This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:
- A minimal Busybox configuration, which is small enough to boot
without causing OOM on such small noMMU platforms. The resulting
Busybox, statically linked with uClibc-ng, weights around 220
KB. For now, this file is located in board/stmicroelectronics/, but
we might consider moving it to package/busybox/ in the future if
needed.
- A post-build script that removes the mounting of /dev/pts (not
enabled in the kernel and not very useful for a system that has no
network and no X), and removes the network related init script and
configuration files (no network support).
- A flash.sh script, to perform the right OpenOCD invocations to
reflash the board.
- One small kernel patch to adjust the kernel command line in the
Device Tree, since it's the only way to do so.
- The usual readme.txt file.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squashed multiple patches from Lee Jones together
- added the minimal Busybox configuration
- added the post-build script
- improved the flashing script to not hardcode the location of the
output directory
- add the small kernel patch
- improve the readme.txt file
- test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the afboot-stm32 Makefile uses "CROSS_COMPILE =
arm-none-eabi-". Since I had such a toolchain installed on my system
when testing afboot-stm32, I didn't realize it wasn't using the
Buildroot toolchain.
However, using the Buildroot toolchain doesn't immediately works for
FLAT toolchains, as gcc automatically wants to create a FLAT
binary. So we need to adjust the afboot-stm32 Makefile to use directly
'ld' and not 'gcc' when linking.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClinux developers now have a Github with elf2flt code, with an
upstream that is again active. Let's switch to this upstream, which
has built-in support for ARM noMMU, contributed by Waldemar.
Since we're now fetching from github, a hash file is added as well.
Finally, we disable -Werror to avoid build issues caused by warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unfortunately gdk-pixbuf-query-loaders doesn't understand cross loaders
to update the cache, hence we can't use the host variant against target
loaders since it will output an effectively empty cache, causing runtime
failure of libgtk when finding icons.
So make host-gdk-pixbuf functionally equivalent to the target gdk-pixbuf
so we can run gdk-pixbuf-query-loaders against the host plugins and just
strip the host directory to make it runtime-compatible (like was done
before for the target directory).
This is still better than trying to update at runtime, since that would
require a writable loaders.cache file in tmpfs or rw filesystem, not to
mention the associated additional startup time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add host variant to be used by host-gdk-pixbuf to update the loaders
cache.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This helps to make sure that QT_SOCKLEN_T is defined to be 'int' only for legacy
glibc < 2 and not also for other libraries which may define it as per standards
but are not glibc, e.g. musl.
Fixes the following build error:
In file included from ../../include/QtNetwork/private/qnet_unix_p.h:1:0,
from kernel/qnetworkinterface_unix.cpp:46:
../../include/QtNetwork/private/../../../src/network/socket/qnet_unix_p.h: In function 'int qt_safe_accept(int, sockaddr*, int*, int)':
../../include/QtNetwork/private/../../../src/network/socket/qnet_unix_p.h:121:76: error: invalid conversion from 'int*' to 'socklen_t* {aka unsigned int*}' [-fpermissive]
Fixes:
http://autobuild.buildroot.net/results/709/709d547699596d09b4601a7940677d2010adeedf/http://autobuild.buildroot.net/results/f05/f0589e1d06404a7bd57f5734228afe45164e553d/
Backported from Qt5:
813f468a14
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-3994 - out of bound read in GIF loader
CVE-2011-5326 - divide by zero on 2x1 ellipse
Switch to sourceforge hashes.
And drop all previous patches, they're upstream, yay.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use "QT_LICENSE := $(QT_LICENSE), xxxx" construct to get rid of the
extra spaces before commas added by the font license clauses.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is a new conflict between Linux header (linux/if.h)
and C library header (net/if.h) introduced by this commit
to the Linux kernel:
1ffad83dffd675cd742286ae82dca7d746cb0da8
Mikko Rapeli is working on a solution, but it requires
changes to the Linux kernel and C library.
For now I would just disable the iptables feature in Strongswan.
The changes fixes following autobuild error:
http://autobuild.buildroot.net/results/e1693a714eb690988c1798b733d0ff143e50b3b9/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
- add a hash file.
- replace patch #0002 by passing the DEFAULT_TARGET to poco
- remove patch #0003 as it is obsolet since upstream commit
010f7a5370be450109f1726e39d5b193e63a6373
- remove patch #0004 which is applied upstream
- remove patch #0005 which is fixed by upstream different
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Henceforth, a sdcard.img file is automatically generated. It simplifies the
procedure to generate a bootable SD card for Atmel Xplained boards.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cannelloni selects lksctp which depends on !BR2_STATIC_LIBS, but this
dependency was not propagated to cannelloni. Due to this, when
cannelloni was selected, lksctp-tools could be built even in a
BR2_STATIC_LIBS=y configuration.
We fix this by propagating the dependency. While we're at it, we
adjust the indentation of the cannelloni comment dependencies.
Fixes:
http://autobuild.buildroot.org/results/b589af984499c532951217eb500ff31e6655c63f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi has specific optimisation and configuration flags for RPi vs. RPi2.
Only configure for the RPi2 when we're sure (i.e. it is a cortex A7),
and fallback to con figuring for the RPi otherwise.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
[Peter: add host-mtools for genimage vfat handling]
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed out by Arnout, racehound does not require kernel headers
3.14-or-later. So, drop this depenency.
It stills require a kernel >= 3.14 to build and run, but we really
have no way to express that dependency as Kconfig options.
Besides, racehound does not build with kernel 4.5 because the struct
modules has been updated. Bump racehound to fix that build failure.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order for joysticks to be detected and used with this
driver, we need an xorg-server configuration file. This commit
installs such conf file to the default X11 xorg.conf.d path,
so we can at least provide a working template.
Users with specific needs can of course override it.
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use XDRIVER_XF86_INPUT_JOYSTICK_PKGDIR
- remove useless empty line.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd service files were supplied with old DBus bus name. After
service activation systemd was waiting for appearance of specified bus
name to consider it started successfully. However, if wpa_supplicant was
compiled only with new dbus interface name, then systemd didn't notice
configured (old) DBus bus name appearance. In the end service was
considered malfunctioning and it was deactivated.
Add upstreamable patch [1], which updates systemd service BusName
property according to configured DBus interface version.
[1] http://lists.infradead.org/pipermail/hostap/2016-April/035599.html
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Made use of github helper because no official tarball
is released.
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
racehound requires a kernel >= 3.14 to be built and to run.
However, the current conditions on the corresponding comments are wrong:
- the comment about the kernel has a dependency on the requested
headers
- the comment on the toolchain features does not have this condition.
Thus, the comments are not shown/hidden under the appropriate
conditions, like in this situation:
- toolchain with headers < 3.14 (e.g. Sourcery CodeBench x86/x86_64
2012.09 with headers 3.5)
- kernel 4.5 enabled
this comment is shown:
racehound needs an Linux kernel >= 3.14 to be built
So, this is incorrect, because:
1- a kernel >= 3.14 is indeed to be built
2- the headers version mismatch is not reported
Fix that by moving the dependency on the kernel headers to the
appropriate comment and enhance it.
Since there is no way we can know the kernel version to be built, we can
not add such a condition; still, we leave the kernel message as-is.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2118 - A man in the middle can intercept any DCERPC traffic
between a client and a server in order toimpersonate the client and get
the same privileges as the authenticated user account.
CVE-2016-2115 - The protection of DCERPC communication over ncacn_np
(which is the default for most the file server related protocols) is
inherited from the underlying SMB connection. Samba doesn't enforce SMB
signing for this kind of SMB connections by default, which makes man in
the middle attacks possible.
CVE-2016-2114 - Due to a bug Samba doesn't enforce required smb signing,
even if explicitly configured.
CVE-2016-2113 - Man in the middle attacks are possible for client
triggered LDAP connections (with ldaps://) and ncacn_http connections
(with https://).
CVE-2016-2112 - A man in the middle is able to downgrade LDAP
connections to no integrity protection. It's possible to attack client
and server with this.
CVE-2016-2111 - When Samba is configured as Domain Controller it allows
remote attackers to spoof the computer name of a secure channel's
endpoints, and obtain sensitive session information, by running a
crafted application and leveraging the ability to sniff network traffic.
CVE-2016-2110 - The feature negotiation of NTLMSSP is not downgrade
protected. A man in the middle is able to clear even required flags,
especially NTLMSSP_NEGOTIATE_SIGN and NTLMSSP_NEGOTIATE_SEAL.
CVE-2015-5370 - Errors in Samba DCE-RPC code can lead to denial of
service (crashes and high cpu consumption) and man in the middle
attacks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And upstream switches tarball name yet again, so adjust SOURCE.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The conditional is wrong, it was check for BR2_PACKAGE_MESA3D_OPENGL_ES
(correct, means GLESv2 support) and BR2_PACKAGE_MESA3D_OPENGL_GLES
(incorrect, there's no such symbol).
So now check for BR2_PACKAGE_MESA3D_OPENGL_EGL (EGL support) plus
BR2_PACKAGE_MESA3D_OPENGL_ES (GLESv2 support), both are required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-iproute2-fix-building-with-musl.patch since it's upstream.
Add gentoo patch to allow for non-iptables builds.
Add new musl build fix.
Tweak 0001-Avoid-in6_addr-redefinition.patch since the first chunk is no
longer required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far, our LDFLAGS for the BR2_BINFMT_FLAT case were only used on
Blackfin. However, passing -elf2flt in LDFLAGS is wrong. Indeed,
LDFLAGS are not linker flags, but flags passed to the compiler when
linking.
If you pass -elf2flt to the compiler when linking, it is understood as
"-e lf2flt", i.e "the entry point is named lf2flt", which isn't
exactly the intention. We in fact need to pass -Wl,-elf2flt in LDFLAGS
as well, so that the compiler passes -elf2flt down to the linker.
For some reason, this option does not cause an issue with the Blackfin
toolchain, but it does with either a Buildroot toolchain for Cortex-M
or an OSELAS toolchain for Cortex-M. We have verified that passing
-Wl,-elf2flt continues to work with the Blackfin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While musl has recently gained noMMU support for the sh2 platform, we
don't support this yet. So for the time being, let's not show musl as
an available C library on noMMU platforms. This is for example
important on ARM noMMU: ARM is supported by musl, but not its noMMU
variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc is not available for noMMU platforms, so it doesn't make sense
to show the comment about glibc requiring dynamic libraries on noMMU
platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building the musl C library on Thumb (Thumb1, not Thumb2), fails with:
{standard input}:20: Error: only lo regs allowed with immediate -- `mov fp,#0'
{standard input}:21: Error: only lo regs allowed with immediate -- `mov lr,#0'
{standard input}:25: Error: unshifted register required -- `and ip,a1,#-16'
Since there are no cores that we support that are Thumb1 only, use the
same solution as the one used by glibc: build the C library in ARM
mode.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The context functions in uClibc unconditionally use the classic ARM
instruction set.
On platforms that do support the ARM instruction set, there is no problem -
However, on platforms that only support the Thumb instruction set, the
context functions cannot be built since the assembler code is not
Thumb-ready. Therefore, these functions must be disabled on such
platforms. All Thumb1 platforms support ARM instructions, so this is
only relevant for Thumb2-only platforms (i.e., Cortex-M).
Note that some packages require the context functions, so these will
fail to build on these platforms. It is worth mentioning that musl
also doesn't provide the context functions, and those are rarely
used. Affected packages will be handled in later patches.
[Peter: slightly reworded]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClibc patches to simplify the ARM Thumb configuration options
have been merged, but instead of being 5 separate patches, they have
been merged as a single patch.
This commit updates the Buildroot uClibc package to use the patch that
was actually upstreamed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 11573f5a14 ("sawman: remove
package"), we removed the sawman package, but forgot to remove the
hash file of that package. This commit finalizes the removal by
getting rid of the hash file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2015-6360: Prevent potential DoS attack due to lack of bounds
checking on RTP header CSRC count and extension header length.
Also, add a hash file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From configure.ac lines 83-89:
AC_ARG_ENABLE(egl, [ --disable-egl],,
enable_egl=yes)
AM_CONDITIONAL(ENABLE_EGL, test x$enable_egl = xyes)
if test x$enable_egl = xyes; then
AC_DEFINE([ENABLE_EGL], [1], [Build Weston with
EGL support])
PKG_CHECK_MODULES(EGL, [egl glesv2])
PKG_CHECK_MODULES([EGL_TESTS], [egl glesv2 wayland-client
wayland-egl])
It also requires wayland-egl which is only provided by mesa3d for now,
hence make it conditional on mesa3d egl+gles.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes (no CVEs yet):
Buffer over-write in finfo_open with malformed magic file.
Invalid memory write in phar on filename with \0 in name.
Parsing of tar file with duplicate filenames causes memory leak.
php_snmp_error() Format String Vulnerability.
Integer Overflow in php_raw_url_encode.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From v6 to v7 just few changes were made for performance improvement and
compatibility.
Switched from git download to source tarballs and hashes.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches upstream so drop them.
The 'bat' binary utility was renamed to 'alsabat' probably to avoid some
clash, keep the old .config symbol to avoid pointless legacy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These three are Zynq boards and the build procedure is almost the
same. Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.
This commit renames as follows:
zedboard_defconfig -> zynq_zed_defconfig
microzed_defconfig -> zynq_microzed_defconfig
xilinx_zc706_defconfig -> zynq_zc706_defconfig
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently systemd getty services ignore baudrates set in buildroot in
favour of a hardcoded 115200. This patch SEDs out that hardcoded value with
what is selected.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-1950 - Fixed a heap-based buffer overflow related to the
parsing of certain ASN.1 structures. An attacker could create a
specially-crafted certificate which, when parsed by NSS, would cause a
crash or execution of arbitrary code with the permissions of the user.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we use unbundled ffmpeg the licensing becomes much easier.
Relevant code is under ext/*, which according to COPYING and comments is
GPLv2+, except for ext/libswscale/gstffmpegscale.c which is LGPLv2+ -
however that's not built/used when using system ffmpeg.
The code under gst-libs/ is the bundled ffmpeg itself.
Tests are under LGPLv2+ as well but we don't build them since we
disabled gst-check support in the gstreamer1 package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It avoids the crazy in handling all of the ffmpeg options here as well,
and potentially avoids target code duplication, hence resulting in a
size reduction.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: extend help text as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The format of the ACL database in tvheadend has changed, and generating
a default user is a little bit more involved than just dumping a file in
the correct locations: filenames are now md5sum (of something?) and the
usernames and passwords now have their own DB.
However, tvheadend has a wizard mode, where it is possible to configure
the basic features, of which creating an admin user.
We remove our canned ACL database, and change the startup script to
start in wizard mode on first run. We also switch to using our infra to
set the permissions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove the bundled sqlite unconditionally, as we always want to use
the external sqlite.
- Remove the --with-system-sqlite option as is only valid for the
bundled sqlite configure script which we will no longer use.
- Do not remove TDBC when BR2_PACKAGE_SQLITE is not selected as it may
be used for other TDBC drivers such as MySQL or PostgreSQL.
Fixes:
http://autobuild.buildroot.net/results/022/02296f8624d3406a63d3a179f53862f245c56dc1/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those [0-9] expressions are needlessly complex, and they actually no
longer work now that sqlite3.11.0 is bundled internally (11 is two
digits, which was accounted for).
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aer-inject allows to inject PCIE AER errors on the software level into
a running Linux kernel. This is intended for validation of the PCIE
driver error recovery handler and PCIE AER core handler.
Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
[Thomas:
- tweak commit log
- rewrap Config.in help text
- remove useless AER_INJECT_MAKE_OPTS variable, use
TARGET_CONFIGURE_OPTS directly
- add missing newline at end of .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a toolchain is glibc based, the getent package assumes that
$(STAGING_DIR)/usr/bin contains the getent program. Unfortunately, the
Codescape MIPS toolchains do not conform with this:
$(STAGING_DIR)/usr/{bin,sbin} are empty, and instead three directories
are provided: bin-o32, bin-n32 and bin-n64 (ditto for sbin), one for
each supported MIPS ABI.
Since this is a toolchain-specific oddity, we handle it by adding a
post-install fixup hook that creates $(STAGING_DIR)/usr/{bin,sbin} as
symbolic link to the appropriate directory.
Fixes:
http://autobuild.buildroot.org/results/9c0ee836021553319f166f9de88750535aee0a58/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It only provided the host variant, which was only used by crda (no
longer necessary), and wasn't available as a host selection.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an upstream-submitted (but not accepted) patch in order to allow
crda to be built with python2 as well as python3.
This drops m2crypto usage (python2-only) in favour of pycrypto which can
be built against both major versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's in the rpi backend block which makes no sense, and it depends on
xwayland being enabled which we currently don't support so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The weston-launch supplemental group is for users to be able to
use/launch weston.
For a full weston(-launch) experience users should be at least members
of weston-launch, video (for framebuffer permissions) and optionally
audio.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When it's enabled set the default weston backend to fbdev, otherwise the
drm backend is the default even though we are not building it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch makes below changes to powerpc-utils package:
- Update to latest upstream version (v1.3.1)
- Update License (from CPL to GPLv2)
- Update source link (from SF to github)
- Disable librtas by default
- Finally make necessary adjustment to compile the source
(run autogen.sh before ./configure as we don't have configure in new tarball).
RTAS:
This package contains few tools (like nvram, ppc64_cpu, etc) which are not
dependent on RTAS support. Traditionally we always had RTAS support (at least
on IBM Power system). But now a days we do have environments like PowerNV host
where we do not have RTAS support. Instead we use OPAL for runtime service [1].
Hence lets disable RTAS by default. If someone wants to build powerpc-utils
with RTAS they can enable it.
[1] https://github.com/open-power/skiboot.git
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[Thomas: re-add hash file, fix license, it's GPLv2+, improve commit title.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As indicated by the uClibc-ng source code, the NPTL thread
implementation is only available on MMU platforms, so we replicate
this dependency in Buildroot so that the appropriate thread
implementation is chosen by default on ARM noMMU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As explained by Waldemar, enabling DOPIC in uClibc will lead to the
creation of a Position Independent library. In turn, this will cause
elf2flt to generate a "Has-PIC-GOT" flat binary, which doesn't work on
ARM. In fact, elf2flt on ARM really expect to have non-PIC code as
input, so we must disable DOPIC in the uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Older gcc were not capable of building a uClibc library, with threads
enabled, in Thumb1. However, the issues have been fixed since gcc 4.9,
so this commit narrows down the condition to just gcc 4.7 and 4.8.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a number of patches to uClibc that radically
simplifies the Thumb handling. uClibc currently has three options that
you need to toggle on Thumb configurations depending on the specific
ARM CPU being targeted.
However, it turns out that none of those options are necessary:
- USE_BX can simply be guessed by looking at the ARM core being
used. The bx instruction is available for all ARM cores >=
ARMv4T. This is exactly what glibc is doing.
- USE_LDREXSTREX can also be guessed by looking at the ARM core being
used: whenever you have Thumb2, ldrex/strex is available.
- COMPILE_IN_THUMB becomes useless, since all it does is passing
-mthumb. But just like the uClibc config options to set
--march=<foo> have been removed a long time ago, there's no need to
-have an option to pass -mthumb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mesa3d can in fact build the DRI infrastructure/drivers just fine
without lingering x11 libs around, it just needs libdrm & friends which
are already accounted for.
So make the libGL (full OpenGL) providing abilities dependant on x11
being present.
It serves it's purpose for EGL+GLES hardware acceleration, and can in
fact be built without them, but it's probably not very useful (still,
leave the option for people inclined to do so).
Simple test defconfig:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed patches applied upstream. This version bump is needed to
provide support for ffmpeg 3.0:
278747ba45
Use BR2_PACKAGE_FFMPEG_AVRESAMPLE by default because OpenCV can use it
after
2b2e3ee93c
Before this patch:
-- FFMPEG: YES
-- codec: YES (ver 57.24.103)
-- format: YES (ver 57.25.100)
-- util: YES (ver 55.17.103)
-- swscale: YES (ver 4.0.100)
-- resample: NO
After this patch:
-- FFMPEG: YES
-- codec: YES (ver 57.24.103)
-- format: YES (ver 57.25.100)
-- util: YES (ver 55.17.103)
-- swscale: YES (ver 4.0.100)
-- resample: YES (ver 3.0.0)
Disabled new options:
WITH_MATLAB, WITH_VA, WITH_VA_INTEL, DOWNLOAD_EXTERNAL_TEST_DATA
Removed obsolete option BUILD_opencv_hal
Removed options WITH_OPENGL & WITH_OPENMP from the "Disabled features"
block because they have their own ifeq-block later on.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linphone 3.6 is incompatible with bumped mediastreamer and ortp
packages. Like Debian we use the bundled versions instead and add the
Debian patch series to support ffmpeg 3.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version bump is needed to provide support for ffmpeg 3.0.
Removed 0001-misc-fixes.patch which previously provided patches to
support newer ffmpeg versions. This is not needed anymore after
this upstream commit:
5e653bfe4c
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump is needed by mediastreamer 2.12.1, the mediastreamer
bump is needed to provide support for ffmpeg 3.0.
Removed srtp option after srtp support was removed from ortp:
5e37fa55f1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of installing login.pam (/etc/pam.d/login) from util-linux
conditionally do so unconditionally from linux-pam.
If busybox login is pam-enabled (linux-pam package enabled) it will be
required, otherwise it will lead to a system where login won't work, and
if util-linux is enabled it will supercede busybox login and will be
necesarry regardless.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installer is a 32-bit executable, so we need the 32-bit libraries on
the host to be able to execute it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
owserver is started unconditionally, but it needs the device(s) to
be specified at startup. Therefore a check for non-empty OWSERVER_ARGS
is added to the owserver start script.
owfs is started only if is built. It will connect to the owserver.
It will try to load the fuse module; if fuse is built-in or already
loaded, modprobe -q will fail silently. The filesystem will be mounted
on /dev/1wire, because it represents the 1-wire slave devices; also,
the bundled Debian init scripts mount it there. We have to create that
directory in the init script in case of devtmpfs, and we have to create
it in the rootfs for static /dev; for simplicity, just do both.
Users who want a setup without owserver need to remove the owserver
init script post-build and need to give appropriate defaults to owfs.
[Peter: fix mountpoint variable typo in S30owfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If OpenGL is enabled then enable cairo-gl.
However if GLESv2 is also present we must choose which implementation to
use.
Since normally OpenGL is more featured, has more dependencies and
wouldn't be present "by accident" it seems like the logical choice to
win over it.
This feature is useful for webkitgtk's accelerated 2d canvas.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Raptor is a free software / Open Source C library that provides a set of parsers
and serializers that generate Resource Description Framework (RDF) triples
by parsing syntaxes or serialize the triples into a syntax.
http://librdf.org/raptor/
Patch added in the package:
0001-configure.ac-remove-conditional-lib-inclusion.patch
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Nitin Mendiratta <nitin.mendiratta@rockwellcollins.com>
[Thomas:
- add else clause for the three optional dependencies, as suggested
by Baruch.
- fix they yajl optional dependency, as noticed by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All Qt5 packages gained the GPLv3 license option and all the documentation
is now under GFDLv1.3 license (except qt5websocket and qt53d)
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 7bac31ceea.
This commit is no longer needed, since libdrm no longer needs arm >=
v6 support thanks to the fix to the CAS implementation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARM patch that was added in commit
94841d87fd ("libdrm: fix support for
xserver with Vivante drivers") makes the assumption that ldrex/strex
is available on ARM. While this is true on ARMv6+, it is not true on
ARMv4/ARMv5. Due to this, we had to make follow-up commits like
7bac31ceea
("package/x11r7/xserver_xorg-server: dri needs arm >= v6") and more is
needed in the reverse dependencies to disable DRI usage on
ARMv4/ARMv5.
In fact, it turns out that the CAS code in libdrm is only an
optimization, and it will gracefully fall back to a system call based
lock/unlock mechanism.
So we simply change the patch to only provide the optimized CAS
implementation on ARMv6+. The original reason for this patch was to
fix Vivante drivers, and Vivante GPUs are only used in ARMv6+ cores,
so we should be fine (famous last words).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luajit Makefile has the following logic:
$(LDCONFIG) $(INSTALL_LIB) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT1) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT2) || :
So if ldconfig fails for some reason, the symbolic links to refer to
the luajit library are not created. Since ldconfig for the target
didn't make sense, LDCONFIG=true has been added a long time ago when
building the target variant of luajit.
However, since commit 9ba8d1cce4, the
host variant of luajit is also linked dynamically. While ldconfig for
the host should work, on certain machines ldconfig is not available in
the PATH, and needs to be explicitly called as
/sbin/ldconfig. However, since output/host/usr/lib is in the RPATH of
the binaries we create, there is really no need to bother running
ldconfig, so we simply pass LDCONFIG=true, like we do for the target
variant. This ensures that the symlinks are always created.
Fixes:
http://autobuild.buildroot.net/results/4dc/4dcbcde0046e265317e170a977e699e5c3a06b87/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
[Thomas: rewrite commit log with a proper explanation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version bump doesn't inherently fix the security issues, however the
added CVE patches do, which fix:
CVE-2016-2147 - out of bounds write (heap) due to integer underflow in
udhcpc.
CVE-2016-2148 - heap-based buffer overflow in OPTION_6RD parsing.
Drop patches that are upstream as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target name is qt5base, not qt5.
[Peter: extend commit message]
Signed-off-by: David Picard <davepiq@yahoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It was accidentaly dropped in the loaders cache rework, shame on me.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0003-thread-Posix-Mutex-Cond-use-constexpr-only-with-glib.patch is
upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version of Qwt is compatible with both Qt and Qt5. This patch
adds the option to compile it for Qt5.
Signed-off-by: David Picard <davepiq@yahoo.fr>
[Thomas: slightly adjust the OpenGL dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rework the selection of Qt options in the qwt package to make it
easier to support other versions of Qt than just Qt4. Instead of
depending on Qt options, we select the ones we need, and simply have a
global "depends on BR2_PACKAGE_QT". This also allows to remove a
comment that becomes useless.
Signed-off-by: David Picard <davepiq@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were two readme files (one for flashing on NAND and one to create a
SD card) in different places. Merge them and update the SD card
generation part since all Xplained boards are supported and the -u
option of sfdisk is obsolete on latest versions.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: adjust the explanations, move the SD card section after the
NAND flash section.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig allows to build all the components to boot from a sd card on a
SAMA5D2 Xplained board. For more details, please read the
board/atmel/readme.txt file.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variant of SAMA5D4 Xplained defconfig file allows to boot from a SD
card.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: remove host-samba from the package selection, not needed when
booting from SD card.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unify and update the defconfig files for Atmel Xplained boards:
- use at91bootstrap as first stage bootloader instead of u-boot spl
- build all dtb variants
- bump to linux4sam_5.2
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the commit f67a4f50e2 "gcc: preserve CXXFLAGS_FOR_TARGET"
target CFLAGS are passed to all libraries bundled with gcc. This breaks
libsanitizer on gcc-4.9.x when building with _FILE_OFFSET_BITS=64:
error: size of array ‘assertion_failed__837’ is negative
...
libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc:837:1:
note: in expansion of macro ‘CHECK_SIZE_AND_OFFSET’
CHECK_SIZE_AND_OFFSET(dirent, d_ino);
This issue is fixed in the libsanitizer mainline and in gcc-5.x.
There's no issue with gcc-4.8.x and earlier.
Reported-by: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Backported from: https://llvm.org/svn/llvm-project/compiler-rt/trunk@220328
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create the gdk pixbuf loaders cache file at build time rather than run
time, since the root filesytem can be read-only.
We also didn't cater for systemd-based systems, so this solves two
issues at once.
The only side-effect is that we must now pull host-gdk-pixbuf into
target gdk-pixbuf dependencies, but generally users will have gdk-pixbuf
selected if they use libgtk2/3 which already pull in host-gdk-pixbuf.
And remove initscript correspondingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libaio support is now automatic so drop the enable/disable (it will fall
back to pthread aio if libaio is not present).
0002-build-improve-stack-protector-check.patch is upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Thomas: add Altera in the option name and description, drop reference
to Go being needed and to Maxime Hadjinlian's version of mkpimage
since a C version is now used.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tool helps to create a working SPL to boot Altera SoC FPGA boards.
The code of mkpimage is integrated directly from the Barebox repository
as stated in the 'mkpimage.mk' file.
This tool is *NOT* necessary for any other boards so far.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
vala/valac can use gir and vapi data files installed by other packages,
but since these are normally installed to staging and host-vala looks
for them in the host directory (logically) this leads to failure.
So wrap them to call the real tool and add this information via
command-line parameters to them.
This is required for vala-in-vala bindings (vapi).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to system/unbundled pcre since it's the default and recommended
by upstream now.
It's also good security practice since pcre patches won't get updated in
the bundled version inside glib so often.
As stated in glib's NEWS:
Overview of changes in GLib 2.47.5
* the system copy of PCRE is now used by default to implement GRegex.
Configure with --with-pcre=internal if a system PCRE version
is unavailable or undesired.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're required for host-libglib2 and using system pcre is the
default/recommended with newer versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erlang/OTP 18.3 is a service release on the 18 track with mostly bug
fixes, but is does contain a number of new features and improvements as
well.
Some highlights of the release are:
. New statistics info about runnable and active processes & ports.
Call erlang:statistics with: total_run_queue_lengths |
run_queue_lengths | total_active_tasks | active_tasks.
. Time warp improvements: dbg:p/2 and erlang:trace/3 with
monotonic_timestamp |strict_monotonic_timestamp.
. Introduced a validation callback for heart.
. The module overload in sasl has been deprecated.
. ~90 contributions since 18.2
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mark the wayland backend as good again since the bump and consequent
protocol version match fixes it.
Drop upstream 0004-Fix-undefined-reference-to-get_xkb.patch
Drop unnecessary 0005-do-not-build-extract-strings.patch
(extract-strings doesn't exist any more).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package consists of scripts that setup cgroups at boot without
doing any cgroup management or classification of tasks into cgroups
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
[Thomas:
- rename to cgroupfs-mount to match upstream
- add proper hash, since hashes should be added for github sourced
packages
- fix minor typos in the init script
- fix the license file information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Use the recently introduced BR2_TOOLCHAIN_HAS_ATOMIC boolean.
- Import an upstream patch to fix error handling when atomic operations
are not detected. Without this patch the build fails due to a syntax
error instead of showing the proper message.
- Add a patch to configure.ac to check if libatomic is needed and force
linking to it (we will attempt to submit this upstream).
- Disable build for SPARC64 because it fails due to a missing definition
of Atomic64.
On PowerPC, the __atomic_*() built-ins for 1-byte, 2-byte and 4-byte
types are available built-in. The corresponding built-ins for 8-byte
types, however, are implemented via libatomic, so requiring gcc >= 4.8.
In Buildroot, to simplify things, it was decided to require gcc 4.8 as
soon as the architectures has at least one __atomic_*() built-in variant
that requires libatomic.
Since protobuf most likely only uses the 1, 2 and 4-byte variants, it
*could* technically build with gcc 4.7. This is probably not a big deal,
and we can live with requiring gcc 4.8 on PowerPC to build protobuf. The
same restriction applies to SPARC.
The build for SPARC64 breaks even using the master branch of protobuf
due to undefined references to some NoBarrier_Atomic*() functions.
Signed-off-by: Henrique Marks <henrique.marks@datacom.ind.br>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we were assuming that whenever you have gcc 4.8, libatomic
is available. It turns out that this is not correct, since libatomic
will not be available if thread support is disabled in the toolchain.
Therefore, __atomic_*() intrinsics may not be available even if the
toolchain uses gcc 4.8.
To solve this problem, we introduce a BR2_TOOLCHAIN_HAS_LIBATOMIC
boolean, which indicates whether the toolchain has libatomic. It is
the case when you are using gcc >= 4.8 *and* thread support is
enabled. We then use this new BR2_TOOLCHAIN_HAS_LIBATOMIC to define
BR2_TOOLCHAIN_HAS_ATOMIC.
As explained in the comment, on certain architectures, libatomic is
technically not needed to provide the __atomic_*() intrinsics since
they might be all built-in. However, since libatomic is only absent in
non-thread capable toolchains, it is not worth making things more
complex for such seldomly used configuration.
Note that we are introducing the intermediate
BR2_TOOLCHAIN_HAS_LIBATOMIC option because it will be useful on its
own for certain packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: improve Config.in comment using a suggestion from Yann.]
While building libevas.so for the host-efl with luajit support, the link fail
when libluajit is build statically:
/usr/bin/ld: output/host/usr/lib/libluajit-5.1.a(ljamalg.o): relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
output/host/usr/lib/libluajit-5.1.a: error adding symbols: Bad value
collect2: error: ld returned 1 exit status
Build luajit dynamically in order to build host-efl with luajit support.
Also, passing HOST_LDFLAGS is needed so that a proper rpath is added
to the resulting binaries. Note that it is expected to have
HOST_LDFLAGS assigned to TARGET_LDFLAGS, it's just that luajit has a
somewhat non-conventional naming of variables. This is needed to avoid
the following error from the rpath sanity check:
***
*** ERROR: package host-luajit installs executables without proper RPATH:
*** output/host/usr/bin/luajit
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was added to the networking category close to connman for the ability
to tweak connman features without going around (i.e. add support for
wifi and so on).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove source schema files from target
(/usr/share/glib-2.0/schemas/*.dtd and *.xml) at target finalization
time.
This is because other packages install schemas as well to avoid
duplicating file removal efforts all around.
Add a schema compiler run on target finalization as well - we previously
didn't do this since not many packages use it, however the upcoming
connman-gtk package does require a valid gschemas.compiled to work
properly.
We also do this at target finalization to avoid each package handling
this on their own.
Purge some extra binaries and files from the target, like the schema
compiler to save additional space since they're unused at run time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: independently done a patch similar to the one
by Thomas]
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the ability to compile and install the kernel
selftests into the target at /usr/lib/kselftests. The rationale behind
/usr/lib is that the selftests have subdirectories where they are
installed which makes them unsuitable to be placed in /usr/sbin as
this would result in /usr/sbin/kselftests/x/y/z. While the selftests
aren't libraries either, they don't achieve much as a standalone
binary so they can be considered to be a 'library of tests' making
/usr/lib sensible.
The selftests require that the kernel headers be installed into the
kernel build tree as some of the selftests have a hardcoded CFLAGS to
include kernel headers (CFLAGS += -I../../../../usr/include/). This is
most easily achieved by using the make ... headers_install inside the
kernel build dir.
This is likely to be a rarely used debugging/performance feature for
development and unlikely to be used in a production configuration.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- remove bash as a build dependency, it is only a runtime dependency.
- fix typo in the Config.in help text, and rewrap
- add missing 'depends on BR2_USE_MMU' dependency for the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The optinal dependency on celt is not added, because we only have
celt-0.5.1 and jack2 requires celt >= 0.5.2 (even though it does look
for celt >= 0.5.0, it does not build with celt- < 0.5.2). Since we
cannot upgrade celt (for now), we just never make jack2 depend on
celt051, and it won't find it either, as it just searches for celt.pc
and we have celt051.pc.
As well, the dependency on eigen is only useful in conjunction with
gtkiostream, for which we do not have a package. So, we don't need to
depend on eigen.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jack2 allows to use three modes:
- A legacy jackd service alone.
- A DBUS jackd service alone.
- A mixture between the standalone jackd and the DBUS jackd.
This patch adds the possibility to choose between these three modes,
while the legacy jackd was the only option before.
In addition, the jack_control tool is removed when the DBUS jackd is not
available, as this tool is used to control it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase
- only use two booleans, not a choice
- python is a runtime-only dependency
- use python3 if enabled, fallback to python
- simplify post-install condition
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix minor typo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For wayland 1.10+ they're split from wayland core and required by
weston.
Hide it behind the wayland package since it's useless independently even
though it can be "built" and installed.
And it makes no sense to install to target since they are DTDs used at
build-time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it outside x11r7 scope since it can be built without it with a few
patches (sent upstream via github pull request).
Motivation is simple, it's a dependency for newer gtk3 versions which
can work with a wayland or broadway backend, and having a full x11 stack
is pointless for that scenario.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: split the first patch into four separate patches, since
that's how they were submitted upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need to match xserver here, since we need glamor support there in
order to enable it here, hence need to match the dependencies.
For xserver it needs dri3proto+libepoxy, however if only libepoxy is
present then glamor would be disabled for the server but enabled for the
driver, leading to build failure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the option to select the Cortex-M4 ARM core, in the
same family as Cortex-M3. This will be useful to enable the internal
toolchain backend for this ARM core, and provide some defconfigs for
Cortex-M4 platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Cortex-M cores only support Thumb-2, not Thumb. In fact, Thumb-2
is a superset of Thumb, and we could have a single option for both in
Buildroot, since -mthumb on ARMv4/v5 means original Thumb, while
-mthumb on ARMv7 means Thumb 2. However, for clarity, it makes sense
to have two separate options. But in this case, Cortex-M3 should not
advertise that it supports Thumb, as in fact selecting Thumb would
generate Thumb-2 code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ethernet is not working, but at least you get a shell and
can test applications for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
some new runtime options, minor fixes, and fixes for issues found by
various code analyze and lintian tools.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using a br2-external tree, it is possible (as stated in our manual)
to implement whatever arbitrary extra make rules (such as flashing a
board, or extracting the rootfs in an NFS export...). Some of those
extra rules might be exposed to the user as new entry points that the
user can call by itself.
However, there is no way for the br2-external to advertise those new
rules in the help text.
We add the possibility to do so, by adding a new make rule, called
help-custom, advertised in our own help info.
It is up to the br2-external tree to provide whatever help text is
deemed necessary. The format of the help is completely free-form.
Note that we need to provide an empty, dummy help-custom rule, since it
is always advertised (making it .PHONY does not work). Since this rule
is empty, make gently reports that there is "Nothing to be done for
`help-local'", which is pretty well fitting when help-local was not
provided (either because there's no br2-external tree, or when the
br2-external tree does not provide it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As we currently download the actual sources as part of saving the
legal-info, we do not check the hashes of those downloads.
That's because, during legal-info, there is not package involved, and
thus there's no path to an actual .hash file.
However, this precludes legal-info from working in off-line mode. A
subsequent patch will make it possible to do so, and actual sources will
be downloaded as another classical package download.
This will have two consequences:
- first, we will be able to add hashes for actual sources, so we can
ensure their integrity,
- second, and as a direct consequence of the above, when a .hash file
is present, it would have to list all the hashes for that package,
or that would be treated as an error.
Currently, the only package that falls in this case is the external-
toolchain, for which we have means to retrieve the sources for some of
the toolchains.
So we just add hashes for those actual external-toolchain sources we may
have to download.
Those hashes are not used for now, but they'll come into play a few
patches down.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a BR2_PACKAGE_WEBKITGTK24_HTTPS to pull in required dependencies for
HTTPS protocol support.
This is almost essentially the same as using midori with HTTPS enabled,
however Midori's HTTPS support is based on glib-networking, and webkit
via libsoup-ssl (for MiniBrowser, it doesn't affect midori's support).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a BR2_PACKAGE_WEBKITGTK24_MULTIMEDIA option that will select/pull in
the basic required components in order for a few multimedia websites
(HTML5 video) to work.
Tested with videojs.com & youtube.com
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forcefully disable the features that have optional dependencies that are
not enabled in Buildroot.
Disable support for bionic since, well, we're not Android.
Slightly re-order the variables to have semantically-related variables
together, with features last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
perf does not honour the -j flags we pass to make; it yet again tries to
reinvent the wheel and by default uses the number of CPUs as the number
of parallel jobs.
Fortunately, in their infinite wisdom, the insane developpers of the
perf buildsystem were kind enough to provide us with a variable we can
set to specify the number of parallel jobs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The perf buildsystem, inside the kernel, is not really amenable to be
easily used...
Regarding the documentation, it will forcefully try to detect asciidoc
and, with the latest versions, xmlto, completely disregarding what the
user may provide.
We currently pass ASCIIDOC= (the empty string) on the make command line,
as an attempt to disable building the documentation, but that has no
effect whatsoever on perf: that variable is not passed down to the
sub-sub-make (yes, a two-level depth) that is responsible for building
the documentation.
We really do not want to build any of the documentation (the user can
refer to the documentation on his own development machine), so we use a
little dirty trick: we provide a GNUmakefile beside the existing
Makefile for the documentation; GNUmakefile always takes precedence over
a Makefile when both are present. We only provide a catch-all-no-recipe
rule in that GNUmakefile, so it really does nothing useful, except avoid
building the documentation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add basic epdc firmware copy to correct output path
- Move legacy epdc firmware to this package out of kernel
- VPU firmware upgrade to v3.1.1_r46070
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/0fdf829
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- Support AVcVuiInfo for Decoder through DecInitialInfo or DecOutputInfo
- Clear structure iram IOGetIramBase() fails to set them to avoid
using uninitialized variables.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/be030922
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version is released with 3.14.52-1.1.0_ga release.
Includes many of the bug fixes and stability improvements.
For more information refer to i.MX Linux Release Notes from NXP website:
L3.14.52_1.1.0_LINUX_DOCS package is under Supporting Information.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f1161869
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- Add frame rate check and return failure if frame rate is invalid
value (<=0)
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/67b3b998
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog since 4.0.7:
-Support hevc in MPG2 parser.
-Enhance the parsing conditions in SPS nal unit.
Parse system header to get stream id.
For mpeg video, don't call parseh264 to avoid mistakes.
-Fix memory leak, free temp data buffer after parsing header.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c3aa06b3
This package has been implicitely tested through gstreamer as the 0.10
plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog since 4.0.7:
- Version alignment with other Multimedia components.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/6a1f559a
This package has been implicitely tested through gstreamer as the 0.10
plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 604095fe9b ("libcap: add
patch to fix build issue with old kernel headers"), libcap builds fine
with headers < 3.0, so it is no longer the reason why lxc needs
headers >= 3.0.
However, lxc uses setns(), which is only available since kernel 3.0,
so we simply update the comment next to the dependency so that it is
accurate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that libcap no longer needs kernel headers >= 3.0, we can remove
this dependency from lxc. However, building with headers 2.6.32
exhibits a build issue caused by the redefinition of the setns()
function.
Since setns() is not implemented in the C library, lxc provides its
own version. However, for some reason, while the C library doesn't
implement setns(), it provides a prototype for it, which is not
exactly the same as the one in lxc, causing a build failure. We re-use
a solution implemented in gdb to solve the same problem: define in lxc
a function called do_setns(), which calls setns() when available, or
manually does the system call otherwise.
Of course, with old kernels the system call will not be available, so
things will fail at runtime, but this was anyway already the behavior
of lxc's setns() dummy implementation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of bumping to version 0.9.3a, two patches are dropped because they
are already upstream.
Signed-off-by: Joshua Henderson <digitalpeer@digitalpeer.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpjsip bundles several third party libraries. In Buildroot we prefer
either not to build them or to depend on a proper package for each of
them. The current recipe disables most of them, but not all, so
disable the remaining ones.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The -rpath option was being stripped from sdl-config via a post install
staging hook, but the same wasn't being done for sdl.pc. Because of
this, packages that detect SDL via pkg-config ended up passing
'-Wl,-rpath,/usr/lib' to the linker, which caused build failures under
certain circumstances since libraries were being looked for in the wrong
directory.
Fix by passing the --disable-rpath option to the SDL configure script,
which takes care of disabling -rpath everywhere. This also allows the
SDL_FIXUP_SDL_CONFIG hack to be completely removed.
Fixes:
http://autobuild.buildroot.net/results/624/62499217eeaf3228b46652e3f65776d7ece8fce6/http://autobuild.buildroot.net/results/cc1/cc1f78f6c43e3a7bf3ed80d759d9c4d7363d0e48/
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the libcap package has a patch that makes it build with
kernel headers < 3.0 (which was needed for the host variant of
libcap), there is no longer a need to have a dependency on headers >=
3.0 for the target variant of libcap.
All reverse dependencies of libcap are handled in this commit, except
lxc, which will be handled in a separate commit since it needs some
special solution.
The build of all those packages has been tested with a toolchain that
uses kernel headers 2.6.32, which is the oldest that our default glibc
version accepts to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Old kernels (before 2.6.36) were defining XATTR_NAME_CAPS in
<linux/capability.h>, but using XATTR_SECURITY_PREFIX and
XATTR_CAPS_SUFFIX which were defined in the kernel-only part of
<linux/xattr.h>.
In kernel 2.6.36 (commit af4f136056c984b0aa67feed7d3170b958370b2f),
the XATTR_NAME_CAPS definition was moved to the kernel-only part of
<linux/xattr.h>. It's only in kernel 3.0 (commit
1dbe39424a43e56a6c9aed12661192af51dcdb9f) that <linux/xattr.h> was
fixed to expose XATTR_NAME_CAPS and the related definitions to
userspace.
This is the reason why the target variant of libcap has a dependency
on headers >= 3.0 for the moment.
However, this doesn't solve the problem for the host variant of
libcap, which doesn't build properly on old systems.
To solve this, we simply add a patch that defines the missing
definitions. Their values haven't changed over time since they are
part of the kernel to userspace ABI.
Fixes:
http://autobuild.buildroot.org/results/856b71bccf14c3334a8c0fc66c1d985b09734313/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though it's inherited by the python dependency it's more clear this
way for graph-depends, since it's used by the waf buildsystem.
And even though we have a hard dependency on python for the distro this
python could ostensibly be 3.x which isn't compatible with the bundled
waf series (1.5.x) in samba (as of current shipping version and upcoming
4.4.x series).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, these flags are recursively propagated. This behavior is
not expected by users, because it can cause dependencies explosively.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, without the flag -recommend, scancpan takes as dependency
only one which has the relationship "requires"; this mode works fine.
And, with the flag -recommend, scancpan takes all ones (ie. with
relationship "requires" or "recommends") in the same way; this mode
never works fine, because it is too simplistic.
With this commit, the "not required" dependencies are handled as
optional BR package or skipped if a cyclic dependency is detected.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 2dcab526a9.
Now that gcc correctly propagates CXXFLAGS_FOR_TARGET for libstdc++
build this is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-4.7.x, gcc-4.8.x and gcc-4.9.x don't propagate CXXFLAGS_FOR_TARGET to
CXXFLAGS for libstdc++ build. As a result libstdc++ is built without
TARGET_CFLAGS and may fail to link with applications using it, see e.g.
http://autobuild.buildroot.net/results/81a3bca5cbcf789c7ce1aa221a6a4154dd7c3917/
Instead of passing TARGET_ABI or TARGET_CFLAGS for libstdc++ in
--enable-cxx-flags parameter backport the patch that fixes propagation
of CXXFLAGS_FOR_TARGET to CXXFLAGS.
This issue is fixed in gcc-5.x
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: We cannot move to u-boot 2016.03 without changing the boot setup as
2016.03 broke legacy boot on omap4.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have modules (including usb/net) loaded automatically, we can
enable dhcp on eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The omap2plus kernel defconfig builds most drivers as modules, so we need
(automatic) module loading to be able to use usb/display/..
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.39.1 (and all odd-numbered versions for y in x.y.z) are development
releases not intended for general usage, so roll back to the latest
stable version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove for the upcoming 2016.05 release, it's been deprecated for a year
now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for a year now so remove it.
[Peter: drop !samba dependency from samba4]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
samba(3) has been deprecated for quite some time so switch mplayer to
use samba4 if available.
It needs a little extra tweak to pick up the proper cflags since the odd
configure script doesn't do it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-2342 (AKA VU#270232): Quagga bgpd with BGP peers enabled for
VPNv4 contains a buffer overflow vulnerability.
Remove the --enable-babeld and --enable-opaque-lsa configure options that were
removed in this release.
See the release announcement at
https://lists.quagga.net/pipermail/quagga-dev/2016-March/014938.html.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d16b32a401 (package/rpi-firmware: add option to install vcdbg) added
a sub option to install the vcdbg tool, but the commit unfortunately
contained two errors:
- The package sets _INSTALL_TARGET = NO, so the _TARGET_CMDS are never used
- The install command used -d (handle arguments as directories) instead of
-D (create needed directories)
Fix these issues.
Cc: yann.morin.1998@free.fr
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
COPYING and LICENSE are identical, so no point including them both.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's all C++ code... C++11 even, but it turns out to compile fine even
with gcc-4.5 (Arago toolchain).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's not really a networking tool (if everything that does something on
the network would be called a networking tool, we wouldn't have much
else).
Since we don't really have an appropriate menu for it, put it in
Miscellaneous.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
arm_versatile kernel defconfig updated to deal with multi-platform ARM
support and driver changes.
mips(el) 32-bits is back in working order for 4.5
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5 2.3.0 YES OK
arm_versatile 4.5 2.3.0 YES OK
arm_vexpress 4.5 2.3.0 YES OK
microblazebe 4.5 2.3.0 YES OK
microblazeel 4.5 2.3.0 YES OK
mips64el_malta 4.5 2.3.0 YES OK
mips64_malta 4.5 2.3.0 YES OK
mipsel_malta 4.5 2.3.0 YES OK
mips_malta 4.5 2.3.0 YES OK
ppc_g3beige 4.5 2.3.0 YES OK
ppc_mpc8544ds 4.5 2.3.0 YES OK
ppc_virtex_ml507 4.5 2.3.0 NO OK
ppc64_pseries 4.5 2.3.0 YES OK
sh4 4.5 2.3.0 YES OK
sh4eb 4.5 2.3.0 NO (1) OK
sparc_ss10 4.5 2.3.0 YES OK
sparc64_sun4u 4.5 2.3.0 YES OK
sparc_sun4u 4.5 2.3.0 YES OK
x86 4.5 2.3.0 YES OK
x86_64 4.5 2.3.0 YES OK
xtensa_lx60 4.4.5 2.3.0 YES (2) OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5 so stick to 4.4.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They don't seem to be causing any issues after many bumps and tests.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in...
https://bugs.busybox.net/show_bug.cgi?id=8786
..., gdb fails to build with xz and expat support at the same time when
using an external toolchain.
This is how the problem is shown:
checking for liblzma... no
configure: error: missing liblzma for --with-lzma
And having a deeper look in gdb/config.log we can se a message like this
one:
/lib64/liblzma.so.5: undefined reference to `clock_gettime@GLIBC_2.17'
As Thomas said in the bug report quoted above, that error is related to
the fact that it find the host's lzma.
Adding --with-lzma-prefix=$(STAGING_DIR)/usr to GDB_CONF_OPTS fixes the
problem.
Credit-to: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream added a configure option to disable -Werror:
ddb31c58b8
Remove our patch therefore and use the new configure option instead.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package makefile attempted to append to KBD_INSTALL_TARGET_OPTS, but this
fails when done before evaluating $(autotools-package). This is because
autotools-package uses ?= to set default values. Instead of appending we now
override KBD_INSTALL_TARGET_OPTS.
Signed-off-by: Niels Skou Olsen <niels@tonebarker.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* add a post-image.sh script
* update defconfig for genimage
* update readme.txt
[Peter: also add host-dosfstools dependency for vfat partition]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent commit 5eb37d6adc broke the build
by default to binutils 2.25 for the target, while we only have hashes
for 2.25.1. Use 2.25.1 instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Taskwarrior is a task management suite of tools. Taskd is the
synchronization server for it.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
[Thomas:
- use 'depends on' for BR2_USE_MMU, and add a comment indicating that
the dependency is due to the use of fork()
- use 'depends on' for BR2_USE_WCHAR, and add a comment indicating
that the dependency is due to gnutls and util-linux.
- add a hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the gcc musl patches for gcc 4.7, 4.8 and 4.9 so
that the path to the dynamic linker encoded as "program interpreter"
in the generated binaries actually matches the symbolic link installed
by musl when building for mips soft-float.
Indeed, musl installs a symlink called ld-musl-mipsel-sf.so.1, but gcc
currently generates binaries that use /lib/ld-musl-mips.so as program
interpreter.
The fix is simply the one from
https://bitbucket.org/GregorR/musl-cross/commits/825219202365, i.e
adjust MUSL_DYNAMIC_LINKER in our musl gcc patches.
Thanks to these patches:
$ ./host/usr/bin/mipsel-linux-readelf -a ./target/bin/busybox
[...]
[Requesting program interpreter: /lib/ld-musl-mipsel-sf.so.1]
[...]
gcc 5.x doesn't need any fix because the musl patches already use the
right value.
Fixes bug #7562.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 6709fad224, python-msgpack was
bumped to a new version that has support for Python 3. The "depends on
BR2_PACKAGE_PYTHON' was removed for the main python-msgpack Config.in
option, but not from the comment. This commit fixes this
inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It doesn't hurt, and is useful for removable boot media like a pendrive
that may depend on usb enumeration and isn't available immediately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It doesn't hurt, and is useful for removable boot media like a pendrive
that may depend on usb enumeration and isn't available immediately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As recently reported on the mailing list:
http://lists.busybox.net/pipermail/buildroot/2016-February/154130.html
Our configuration options to use sha-256 / sha-512 password encoding do not
work very well with uClibc-ng as our defconfig doesn't enable support for
these encodings, breaking E.G. password login with dropbear.
Notice that it doesn't break login with the busybox login applet, as we
currently force the use of the internal busybox password handling routines
when sha-256/512 encoding is used. This workaround can afaik now be removed.
To fix this, enable support for these password encodings in our defconfig.
Do it unconditionally and not based on BR2_TARGET_GENERIC_PASSWD_* so it
also works when a Buildroot toolchain is reused as an external toolchain and
as the support code is quite small (~8KB):
-rwxr-xr-x 1 peko peko 13360 Mar 7 22:56 output/target/lib/libcrypt-1.0.12.so
-rwxr-xr-x 1 peko peko 21552 Mar 7 23:47 output-sha/target/lib/libcrypt-1.0.12.so
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1285 - An error parsing input received by the rndc control
channel can cause an assertion failure in sexpr.c or alist.c
CVE-2016-1286 - A problem parsing resource record signatures for DNAME
resource records can lead to an assertion failure in resolver.c or db.c
CVE-2016-2088 - A response containing multiple DNS cookies causes
servers with cookie support enabled to exit with an assertion failure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream was super reactive, and already committed a patch to fix the
build on SuperH, so we take this upstream patch in Buildroot and
re-enable fio on SuperH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch 0001-compile-fix-for-linux-header-changes.patch is removed
as it was a backport from an upstream patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Despite the documentation and the comment in xtensa_move_literals, in
the presence of --text-section-literals and --auto-litpools literals are
moved from the separate literal sections into .init and .fini, because
the check in the xtensa_move_literals is incorrect.
This fixes build errors seen with projects that have .init/.fini and use
text-section-literals.
Backported from: 4111950f363221c4641dc2f33bea61cc94f34906
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016.72 - 9 March 2016
- Validate X11 forwarding input. Could allow bypass of authorized_keys command= restrictions,
found by github.com/tintinweb. Thanks to Damien Miller for a patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A recently discussed on the mailing list:
http://lists.busybox.net/pipermail/buildroot/2016-February/154189.html
Our mdev configuration currently doesn't handle module loading. Fix that by:
- Telling mdev to run modprobe on hotplug events providing MODALIAS
- Adjust the init script to handle coldplug modalias events (E.G. modules
for which the devices were already present before mdev was added as the
hotplug handler). mdev -s should arguable handle this, but it doesn't.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default syslog parameters are to keep only 200-400 KiB of logs,
which is very few if there is a spammy daemon on the system, or a daemon
that fails and then spams errors that hides the original problem.
Make S01logging source a /etc/default/logging file where these
parameters can be overridden.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're not trying to be minimal here, and qemu can bridge/emulate certain
usb devices, so enable the different controllers and at least usb
storage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're not trying to be minimal here, and qemu can bridge/emulate certain
usb devices, so enable the different controllers and at least usb
storage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use $(SED) instead of sed.
Kill trailing whitespace in comment, and move it above the define as per
standard look.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1950 - heap-based buffer overflow related to the parsing of
certain ASN.1 structures. An attacker could create a specially-crafted
certificate which, when parsed by NSS, would cause a crash or execution
of arbitrary code with the permissions of the user.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have removed gcc 4.5 support since a long time, so this commit
removes dead code that was only used when building a toolchain based
on gcc 4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-7560 - Authenticated client could cause Samba to overwrite ACLs
with incorrect owner/group.
CVE-2016-0771 - Malicious request can cause the Samba internal DNS
server to crash or unintentionally return uninitialized memory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do source the glibc and uClibc packages in the toolchain menu,
because they do provide user-visible options. However, we do not so
far source the musl Config.in file
However, in 822be87 (toolchain: include C libraries in legal-info),
a Config.in file for musl was explicitly created, so that:
- legal-info would work (needed at the time, probably no longer needed
nowadays),
- the appropriate packages are enabled, like netbsd-queue or kernel
headers.
Yet, we do not source musl/Config.in, which means we do not get
netbsd-queue or kernel-headers to be selected:
$ make distclean; make menuconfig
Toolchain --->
C library ---> musl
save-and-exit
$ grep BR2_PACKAGE_LINUX_HEADERS .config
[nothing]
$ grep BR2_PACKAGE_NETBSD_QUEUE .config
[nothing]
Fix that by sourcing musl/Config.in at the same place we source glibc
and uClibc.
Normally, we do have a check in place that verifies that a package
that is not enabled is not a dependency of another package that is
enabled. However, musl is only a dependency of host-gcc-final, which
is a host package and has no corresponding BR2_PACKAGE_HOST_GCC_FINAL.
Thus host-gcc-final is not in the PACKAGES variable, and thus does not
trigger our check.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we've got an mbedtls package in the tree we can enable the
optional support for it in libcurl.
We also remove the comment about polarssl support needing version
1.3.x. Indeed, polarssl was renamed to mbedtls when bought by ARM,
which was circa the 1.3.x polarssl release. Due to this referring to
polarssl 1.3.x doesn't make a lot of sense, and we'll probably never
package polarssl 1.3.x in Buildroot now that mbedtls replaces it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Thomas: slightly improve commit log as suggested by Luca, using
explanations from Gustavo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install package in staging directory, so that this package can be
linked together with other packages (for example collectd and its
onewire plugin).
Signed-off-by: Roland Franke <fli4l@franke-prem.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the bump to the 4.1.x series the bundled pgm library was dropped and
the --with-system-pgm option was made pointless since using unbundled
became the only option, so it was renamed to --with-pgm, which
previously meant "use bundled" (but not any longer).
However this wasn't accounted for and pgm support has been broken since
then.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes an issue where an Erlang program compiles fine against files
in staging, but fails to run on the target due to the unwanted packages
being removed.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gmrender-resurrect is UPnP (DLNA) renderer based on gstreamer.
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
[Thomas:
- Fix gstreamer related dependency comments to "gstreamer1 ->
libglib2", as suggested by Arnout.
- select BR2_PACKAGE_GST1_PLUGINS_BASE as a run-time dependency, as
suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 5e05faec7b4 (zsh: use the correct target pcre-config) set
ac_cv_prog_PCRECONF to the location of staging pcre-config. Unfortunately zsh
configure script does not actually use this variable when running pcre-config.
Complete the fix with a patch that makes use of ac_cv_prog_PCRECONF.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mxs-bootlets broke somewhere in between toolchain version bumps, leading to
boot failure.
Directly boot u-boot, as this is supported now, but it requires updated
partitioning (see readme.txt)
Drop mxs-bootlets patches, they aren't needed anymore.
Kernel is built as an uImage because the u-boot defconfig expects an
uImage on the second partition.
Tested on iMX233-OLinuXino-MINI hardware.
[Peter: adjust readme/config as suggested by Arnout]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A 'Libs.private' field needs to be present and properly defined in the
pkg-config file in order for static linking against SDL_mixer to work.
Besides adding the mentioned field, the included patch also modifies
configure.in so that EXTRA_LDFLAGS (which is now also used as the value
of 'Libs.private') no longer includes SDL_LIBS. This is done so as to
prevent libraries required by SDL from being listed twice when
'pkg-config --libs --static SDL_mixer' is run (they're already shown
because of the 'Requires: sdl' line in SDL_mixer.pc). Makefile.in is
adjusted accordingly as well.
Also enable autoreconf for this package since we're patching
configure.in.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Drop
0001-cmake-disable-shared-library-build-when-BUILD_SHARED.patch,
since CMakeLists has been reworked. Static/shared build can now be
configured via configuration options.
- Add support for optional libev and libuv.
- Use the github macro for download.
- Update hash.
Signed-off-by: Sagaert Johan <sagaert.johan@proximus.be>
[Thomas: tweak the commit log a bit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001-sched-workaround-glibc-_POSIX_PRIORITY_SCHEDULING-bu.patch is
removed because it was merged upstream. Since this patch is
removed, autoreconfiguring the package is no longer needed.
- the ncurses dependency is dropped because the ncurses-related
functionality from luaposix was removed, and moved to a separate
project.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: write a proper commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ifneq ($$($(2)_SITE_METHOD),override) test will always match
because SITE_METHOD is never set to "override". The result is that
some packages are downloaded and extracted unnecessarily, although
they are (correctly) not saved in output/legal-info/.
Fix by simply testing $(2)_OVERRIDE_SRCDIR instead: when empty, it
indicates that the packages is neither a "local" site-method package
nor a package that has its source directory overridden.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move to the latest release of linux-pam. This allows us to remove
a number of patches and consolidate the existing ones :
- 0001-configure.patch
- 0007-rhosts.patch
these two patches deal with the ruserok function, which is not
usable with uclibc. Consolidated into
0002-Conditionally-compile-per-ruserok-availability.patch.
- 0003-group.patch
- 0005-succeed.patch
- 0006-time.patch
these three patches deal with the innetgr function, which is not
usable with uclibc. Consolidated into
0003-Conditionally-compile-per-innetgr-availability.patch.
- 0004-mkdir.patch
Fixed in upstream, no longer required.
- 0002-doc-makefile-am.patch
renamed to 0001-doc-makefile-am.patch.
- 0008-fix-CVE-2014-2583.patch
- 0009-fix-CVE-2013-7041.patch
These patches are already included in the new release and so
can be safely deleted.
Signed-off-by: Brendan Heading <brendanheading@gmail.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the prebuilt musl toolchains provided by http://musl.codu.org/
had not been updated in a while, a new release based on musl 1.1.12
has been put online in December 2015. This commit updates our external
toolchain package to use this new pre-built toolchain.
Compared to the previous 1.1.6 toolchain, there are some changes:
- The MIPS big endian soft-float variant is no longer available.
- The Microblaze variant is no longer available.
- SuperH 4, both little and big endian, variants have been added.
- The components have been updated: gcc 5.3 is used, binutils 2.25.1,
and of course musl 1.1.12.
Besides the update itself, in this commit, we are:
- Making the musl toolchain non-selectable on MIPS big endian
soft-float.
- Making the musl toolchain actually work on MIPS little endian
soft-float, by downloading the right tarball and setting up the
right symbolic link.
- Removing support for the Microblaze variant, and adding support for
the SH4 variants.
All variants except armeb have been boot tested under Qemu, up to a
Busybox shell prompt. armeb has not been tested due to the lack of a
Qemu configuration for this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All modules are always enabled when their dependencies are satisfied.
tcl doesn't work because the tclConfig.sh installed by our tcl package
is wrong: it adds -I/usr/include.
perl doesn't work out of the box, I didn't investigate.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When minizip was compiled before, vlc will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/vlc/plugins/access/libzip_plugin.so | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libintl.so.8]
0x0000000000000001 (NEEDED) Shared library: [libminizip.so.1]
[...]
The build system offers no option to en-/disable minizip support,
the same is valid for zlib support:
https://git.videolan.org/?p=vlc.git;a=blob;f=configure.ac;h=be658816bcda642090e1cff20d93e61b25299250;hb=HEAD#l831
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libcddb was compiled before, vlc will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/vlc/plugins/access/libcdda_plugin.so | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libcddb.so.2]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#8736
When IPv6 and largefile options were removed from Buildroot, the code to
force these options in busybox were still left in.
There's no strong reason to forcefully enable these options (only to disable
options if the system cannot support it like we do for nommu), so instead
enable the options in our default defconfig, allowing people to override
this if they use a custom config.
While we're at it, enable the prefer-ipv4 option so network applets like
ntpd doesn't fail when dual stacked hosts are resolved from a system without
IPv6 support enabled in the kernel.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It didn't make sense to keep the U-Boot scripts and post build/image
scripts under the nitrogen6x folder since they apply for all our
platforms.
Also update the readme.txt to make it clearer which defconfig should
be used depending on the platform targeted.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1531 - All installations having Exim set-uid root and using
'perl_startup' are vulnerable to a local privilege escalation. Any user
who can start an instance of Exim (and this is normally *any* user) can
gain root privileges. If you do not use 'perl_startup' you *should* be
safe.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2037 - The cpio_safer_name_suffix function in util.c in cpio
2.11 allows remote attackers to cause a denial of service (out-of-bounds
write) via a crafted cpio file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also change SOURCE since the tarball got renamed with the bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As directed in the buildroot manual, "Optional hooks: keep hook
definition and assignment together in one if block". And also
to be consistent with the rest of avahi.mk.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/018/0183ba8c9fccc87f9e72279c49c2fdc1a9fcb556/
The recent openssl security bump disabled SSLv2 support, but python-m2crypto
was still referencing SSLv2 functions causing undefined symbols when the
module was imported. Backport an upstream patch to only reference these
symbols if openssl is built with SSLv2 support.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Packages like QT5 Base with OpenGL and X support link against libGAL.so
at build time. This results in an error because some X functions used
in libGAL.so aren't referenced as the libXdamage, libXext and libXfixes
packages aren't built and installed into sysroot at the time. Fix this
by adding these three packages as build dependencies of imx-gpu-viv.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
musl build patch is upstream so it's no longer necessary.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The linux-headers -> linux dependency causes a circular dependency, breaking
the source/legal-info/graph-depends/.. targets:
make graph-depends
Getting targets
Getting dependencies for ['toolchain-buildroot', 'toolchain', 'busybox',
'glibc', 'initscripts', 'linux-headers', 'skeleton', 'linux',
'host-fakeroot', 'host-makedevs', 'rootfs-cpio', 'rootfs-initramfs']
Getting dependencies for ['host-kmod', 'host-gcc-final',
'host-gcc-initial', 'host-gawk']
Getting dependencies for ['host-gmp', 'host-binutils', 'host-pkgconf',
'host-mpfr', 'host-mpc']
Getting dependencies for ['host-m4']
Recursion detected for : toolchain
which is a dependency of: linux
which is a dependency of: linux-headers
which is a dependency of: glibc
which is a dependency of: host-gcc-final
which is a dependency of: toolchain-buildroot
which is a dependency of: toolchain
Makefile:721: recipe for target 'graph-depends' failed
make: *** [graph-depends] Error 1
Fix it by instead duplicating in linux-headers the 10-20 lines of linux.mk
logic that infer the _SOURCE/_SITE/_VERSION from the BR2_LINUX_KERNEL_*
variables.
This does mean that we extract the kernel sources twice though.
[Peter: use same git/hg tarball as linux kernel to not clone twice, minor fixes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kodi itself already depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7, there is
no need to duplicate this as reverse dependencies in sub options which
depend on Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi itself already depends on !BR2_STATIC_LIBS, there is no need to
duplicate this as reverse dependencies in sub options which depend on
Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build stops with
configure: error: unsupported host (i586-buildroot-linux-musl)
due to musl not being supported in
https://github.com/xbmc/xbmc/blob/Isengard/m4/xbmc_arch.m4
Removing this obstacle will show that musl is really not being
supported, the build will fail:
In file included from emu_msvcrt.cpp:64:0:
emu_msvcrt.h:93:3: error: ‘__off64_t’ does not name a type
__off64_t dll_lseeki64(int fd, __off64_t lPos, int iWhence);
^
emu_msvcrt.h:94:3: error: ‘__off_t’ does not name a type
__off_t dll_lseek(int fd, __off_t lPos, int iWhence);
^
I know these problems are fixable and the voidlinux projects seems to
have done it already for 15.2-Isengard:
99f74705bc/srcpkgs/kodi/patches
For Jarvis-16.0 these patches have to be rebased at a later stage.
For now block the Kodi package with musl-based toolchains to avoid
build errors.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by Peter Korsgaard, using DESTDIR=$(HOST_DIR) and PREFIX=/usr
for the host installation is useless and actually incorrect (the
pkg-config file contains incorrect paths). Instead, using
PREFIX=$(HOST_DIR)/usr is simpler, and actually correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we opened up the next branch, a number of options have been
added to Config.in.legacy. However, they are located under the "legacy
options removed in 2016.02", which is not correct. This commit fixes
that by adding the "legacy options removed in 2016.05" header, and
restoring the one related to 2016.02 at the right location.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option was a bit misleading since it only selected additional
libraries without --enable/disabling any features. Including all of them
here would add a lot of bloat so instead, it is replaced with notes
detailing which features each library enables.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Thomas:
- slightly tweak Config.in help text, as suggested by Arnout.
- add Config.in.legacy handling for BR2_PACKAGE_SYSTEMD_ALL_EXTRAS,
as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd v228 requires lz4 >= 125
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Thomas: only pass PREFIX=/usr at install time instead of using
LZ4_MAKE_OPTS, and also pass it for the host installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds LIRC_TOOLS_INSTALL_STAGING = YES to the lirc-tools
package to get the library headers into sysroot, which is needed to
develop lirc based applications.
Signed-off-by: Michael Schenk <michael.schenk@albistechnologies.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The way we use it, gzip will store the current time in the header, which
leads to unreproducible archives.
Fix that by telling gzip to not store the name and date of the file it
compresses, with the -n option. Since it compresses its stdin, there was
already no filename stored; now there's even no date stored.
Note: gzip has had -n since at least 1.2.4, released in 1993, so
virtually every gzip out there nowadays has it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to pass an argument to ld for setting the endianness when
building it for MIPS architecture, otherwise the default one will always
be used (which is big endian) and the compilation for little endian will
always fail showing an error like this one:
LD foo.o
mips-linux-gnu-ld: foo.o: compiled for a little endian system and target
is big endian
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comment must be displayed with toolchain without C++ compiler support when
BR2_STATIC_LIBS is not set.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes a leak in host compiler path for monodoc.
This bug is solved upstream but the fix is not included
in the latest stable release.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this implementation, the different licenses will be separated with
<space><comma>. This is not nice, but to avoid it a pretty ugly construct
is needed:
QT_LICENSE = $(shell echo $(QT_LICENSE_BITS) | sed 's% , %, %g')
Since the <space><comma> is just a minor nuisance, we're not going to that kind
of complexity.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds an option to the util-linux package that allows to
build the lsblk utility.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the latest kernel with DT path adjustment because Linux
commit ca5b34100c57 ("dts, arm64: Move dts files to vendor subdirs")
moved the DT file to the vendor sub-directory.
This commit was tested with the latest model (FVP v8 Foundation
Platform 9.5 build 41), so I updated the instruction in readme.txt
corresponding to it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
VFPv3 and NEON was enabled and a readme.txt file was added.
Fixes bug #7580.
Tested on Pandaboard ES.
[Peter: use EABIhf]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libcap was compiled before, avahi daemon will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/sbin/avahi-daemon | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libavahi-common.so.3]
0x0000000000000001 (NEEDED) Shared library: [libavahi-core.so.7]
0x0000000000000001 (NEEDED) Shared library: [libcap.so.2]
[...]
The build system offers no option to en-/disable libcap support:
http://git.0pointer.net/avahi.git/tree/configure.ac#n382
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: make the test unconditionally, even if libcap is only used by
avahi-daemon for the moment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google Code is being shut down. The google code site which hosts the
source .tar.gz references github/felipec, which has a gst-omapfb
repository with the same code as the tar.gz previously referenced.
Change the GST_OMAPFB_SITE to this github repo.
Signed-off-by: Alan Ott <alan@softiron.co.uk>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google Code is being shut down. The google code site which hosts the
source .tar.gz references github/felipec, which has a gst-dsp repository
with the same code as the tar.gz previously referenced.
Change the GST_DSP_SITE to this github repo.
Signed-off-by: Alan Ott <alan@softiron.co.uk>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google Code is being shut down. The google code site which hosts the
source .tar.gz references github/felipec, which has a dsp-tools repository
with the same code as the tar.gz previously referenced.
Change the DSP_TOOLS_SITE to this github repo.
Signed-off-by: Alan Ott <alan@softiron.co.uk>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wpa_supplicant is licensed under BSD-3c only and not dual licensed.
Quoting from COPYING file
This software was previously distributed under BSD/GPL v2 dual license
terms that allowed either of those license alternatives to be
selected. As of February 11, 2012, the project has chosen to use only
the BSD license option for future distribution. As such, the GPL v2
license option is no longer used.
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd is licensed under BSD-3c only and not dual licensed.
Quoting from COPYING file
This software was previously distributed under BSD/GPL v2 dual license
terms that allowed either of those license alternatives to be
selected. As of February 11, 2012, the project has chosen to use only
the BSD license option for future distribution. As such, the GPL v2
license option is no longer used.
Reviewed-by: Abhimanyu Vishwakarma <Abhimanyu.Vishwakarma@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch solves an host path leaking in /etc/mono/config
that leads to searching libmonoposixhelper into the wrong path.
This bug is fixed upstream, but not included in the current stable
release.
Fixes bug #8651.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0001-add-cstdlib-header-to-ensure-EXIT_FAILURE-presence.patch since
it's already upstream.
Rebase shared/static build patches - these look unnecessary if we switch
to cmake-package, however it seems to require the zmq package switches
to cmake-package as well since static library naming looks different,
which might be a problem for users.
Also set the minimum required version of gcc to 4.7.x since the code now
requires c++1x.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iputils does not have to be built with openssl so remove selecting
BR2_PACKAGE_OPENSSL and make the dependency optional
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding a patch is a modification to Buildroot. Thus this sentence might be
interpreted as "Patches are released under the Buildroot license".
Being a legal matter, the last thing we want is to be
ambiguous. Reword the sentence to avoid any misunderstandings.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that all the boards have been converted to use genimage, the old
instructions on how to partition and write an SD card are useless.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-enable-internal-getproto-functions-for-musl.patch since it's
no longer required (tested via a flickcurl build with libnss against
mips-musl).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These defconfig options are set to their default values, so they are
redundant and can be removed without effect.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To allow a more complete "out-of-the-box" startup with the defconfig,
enable automatic network configuration of eth0 using DHCP.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're already using 4.9.x as default, and have 4.8.x on the lower side
together with 5.x (5.3.0) on the higher side.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0000-makefile-remove-host-headers-include.patch is upstream so remove it
and drop autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARC gcc understands "-pie" option and attempts to generate PIE
binaries as of today PIE is not really supported for user-space
applications.
So we provide option which checks if compiler understands relro
and pie options and disable PIE detection if building for ARC.
Also AUTORECONF option should be added because of modified
configure.in and Makefile.am files.
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Lada Trimasova <ltrimas@synopsys.com<mailto:ltrimas@synopsys.com>>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas P. has sent a few big feedback mails recently that explain how a
patch should be formatted. Indeed, this was not explained much in the
manual, so add a section that explains how patches should be formatted.
This is based heavily on the feedback that Thomas P. gave. Also,
specific examples for new packages and version bumps are added.
This will allow us to refer to
https://buildroot.org/manual.html#submitting-patches
in the future instead of composing long mails.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: rewrap to our normal formatting practice.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In subsequent patches, we will add more explanation about how to
prepare patches, so it will be worthwhile to have a separate section
for the series preparation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: rewrap to our normal formatting practice.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Glibc is currently configured without any "--enable-kernel" option.
This causes it to use the oldest possible kernel API, slowing it down
and preventing it from using any kernel features from later versions.
Since we are likely building a kernel and matching glibc together,
backwards compatability is probably unnecessary so this patch
unconditionally configures glibc with --enable-kernel set to
BR2_TOOLCHAIN_HEADERS_AT_LEAST.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is using a different kernel and u-boot branch than the
other Boundary Devices platforms since NXP forked the 3.14 kernel to add
i.MX7 support (see imx_3.14.38_6ul7d_beta branch).
Next kernel version, 3.14.52, will be the same for all i.MX platforms.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow the upstream EOL cycle and mark 4.3 as deprecated for 2016.05.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add hint to help text
- add assimp dependency
- always install the gltf (and any future) sceneparser to target.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update commit message as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 24dfbe71e (arch/arm: do not distinguish revisions of ARM1136JF-S)
removed the r0 variant of the arm1136jf-s, but didn't update the defconfig -
So it ends up using arm926 instead.
Fix it by selecting the correct symbol instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to the issue with the Atmel A5 based boards, the VFP is optional on
A9 - So we need to enable it to be able to use EABIhf.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent changes in Config.in.arm regarding the VFP selection broke the
atmel_sama5d* defconfigs. Ensure EABIhf is selected as all the sama5 have a
vfp.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a _very_ small bootloader for STM32 platforms.
At submission afboot-stm32 supports the following boards:
stm32429i-eval
stm32746g-eval
stm32f429i-disco
stm32f469i-disco
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, add dependency on BR2_arm.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit b3fa8e24 (configs: remove calao_snowball_defconfig) dropped the
outdated snowball defconfig, but forgot to remove the board files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the two firefly_rk3288 defconfigs recently
added. First we switch to the ARM cortex-A17 core. Second,
we switch the kernel github access from SSH to HTTPS, which
is suitable for anonymous access.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the Cortex A17 variant. This core is considered a replacement
of the Cortex A12 and is supported by gcc 5 / binutils 2.25+
Suggested-by: Ross Green <greenfross@netscape.net>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
multicat is a simple and efficient multicast and transport stream manipulation
tool.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for gr-osmosdr - a GNU Radio block for interfacing with various
radio hardware.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas:
- instead of selecting BR2_PACKAGE_GNURADIO, use "depends
on". Indeed, it is fairly obvious for a user that some GNURadio
extensions require GNURadio to be built. And it avoids the need to
replicate all the complex dependencies of GNURadio.
- remove comment that the Python support needs Python. It's fairly
obvious, no?
- remove comment about the thread dependency of
BR2_PACKAGE_GR_OSMOSDR_RTLSDR, since anyway GNURadio already need
threads. Yes, we sometimes still add such dependencies, but in the
case of GNURadio, it's highly unlikely that GNURadio will ever
loose the thread dependency.
- use "NO" instead of "no" as the value for
GR_OSMOSDR_SUPPORTS_IN_SOURCE_BUILD since we always use upper-case
letters for the value of such booleans.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a kludge switching the explicit invocation of the ip binary
from /bin to /sbin since that's where buildroot installs it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libcap was compiled before, quagga will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/vtysh | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libcap.so.2]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When zlib was compiled before, binutils will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/libbfd-2.24.so | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libz.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Apparantly the build system offers no support to control the
dependency, --without-system-zlib with zlib installed still provides
libbfd-2.24.so linked to libz.so.1.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libsigsegv was compiled before, gawk will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/gawk | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libsigsegv.so.2]
[...]
The build system offers no option to en-/disable libsigsegv support:
http://git.savannah.gnu.org/cgit/gawk.git/tree/m4/libsigsegv.m4
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libsodium was compiled before, pure-ftpd will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/pure-statsdecode | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libsodium.so.17]
0x0000000000000001 (NEEDED) Shared library: [libcrypt.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
The build system offers no option to en-/disable libsodium support,
check configure.ac, line 953.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When opus was compiled before, mediastreamer will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/libmediastreamer_voip.so.3.0.0 | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libmediastreamer_base.so.3]
0x0000000000000001 (NEEDED) Shared library: [libopus.so.0]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libupnp was compiled before, mediastreamer will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/libmediastreamer_voip.so.3.0.0 | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libmediastreamer_base.so.3]
0x0000000000000001 (NEEDED) Shared library: [libupnp.so.6]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libusb-compat was compiled before, gnupg2 will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/libexec/scdaemon | grep NEEDED
[...]
0x0000000000000001 (NEEDED) Shared library: [libusb-0.1.so.4]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Openobex looks for libusb.pc provided by libusb-compat, not libusb-1.0.pc
provided by libusb:
https://github.com/zuckschwerdt/openobex/blob/master/acinclude.m4#L171
Openobex links against both libusb (libusb-1.0.so.0) and libusb-compat
(libusb-0.1.so.4):
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/ircp | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libopenobex.so.1]
0x0000000000000001 (NEEDED) Shared library: [libusb-0.1.so.4]
0x0000000000000001 (NEEDED) Shared library: [libusb-1.0.so.0]
[...]
This patch changes the dependency in openobex.mk and also selects
libusb-compat.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When invoking a build from a non-interactive session (for example, a
Jenkins build), there is no terminal session to modify. When preparing
variables to track the bold and boldoff mode sequences, the `tput`
command will always fail as there is no terminal to query. The following
change masks the error message when `tput` fails; leaving the TERM_BOLD
and TERM_RESET variables empty.
Signed-off-by: James Knight <james.d.knight@live.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When zlib was compiled before, omniorb will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/libomniZIOP4.so.2.0 | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libomniORB4.so.2]
0x0000000000000001 (NEEDED) Shared library: [libomnithread.so.4]
0x0000000000000001 (NEEDED) Shared library: [libpthread.so.1]
0x0000000000000001 (NEEDED) Shared library: [libz.so.1]
[...]
The build system offers no option to en-/disable zlib support,
check acinclude.m4, line 435+.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the flac package itself libogg is an optional dependency, but for
flac support in sdl_sound libogg is mandatory:
http://hg.icculus.org/icculus/SDL_sound/file/394e3ec86164/configure.in#l263
To avoid compiling flac when libogg is disabled change the if-clause
in this package to reflect the real dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/libSDL_sound-1.0.so.1.0.2 | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libFLAC.so.8]
0x0000000000000001 (NEEDED) Shared library: [libmodplug.so.1]
0x0000000000000001 (NEEDED) Shared library: [libm.so.1]
0x0000000000000001 (NEEDED) Shared library: [libogg.so.0]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libv4l was compiled before, gst1-plugins-good will use it as
optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/gstreamer-1.0/libgstvideo4linux2.so | grep NEEDED | sort
[...]
0x0000000000000001 (NEEDED) Shared library: [libv4l2.so.0]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When lzo was compiled before, cairo will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/cairo-sphinx | grep NEEDED | sort
[...]
0x0000000000000001 (NEEDED) Shared library: [liblzo2.so.2]
The build system offers no option to en-/disable lzo support:
https://cgit.freedesktop.org/cairo/tree/configure.ac#n54
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bind source tar-ball is now embedded into the dhcp source. The embedded
bind tar-ball is extracted after the dhcp source so cross compiling
patches can be applied to the dhcp and bind before the package is built.
The embedded bind configure is called as part of dhcp make instead of
dhcp configure; therefore, needed configure parameters are set in the
make env.
0001-dhcp-cross-compile.patch and 0002-bind-cross-compile.patch have
been submitted upstream as part of a cross compiling enhancement
suggestion to dhcp-suggest@isc.org. Reference ISC-Bugs #41502.
0003-bind-hos-cc.patch is already scheduled for the next dhcp release.
Buildroot thread
http://lists.busybox.net/pipermail/buildroot/2016-January/149079.html
has related information.
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
* vpu:
- Completely rewritten plugin code; elements now based on libimxvpuapi
instead of libfslvpuwrap
- imxvpuenc_h264 inserts SPS/PPS data in front of I/IDR frames
- imxvpuenc_mjpeg's quality factor actually has an effect, and is
equivalent to the libjpeg's quality factor (it is used in exactly
the same way to scale the quantization matrix' coefficients)
- the encoder's output buffers no longer have to use DMA memory; they
use regular system memory instead
- new support in imxvpudec (referred to as "chroma interleaving") for
NV12, NV16, NV24 as output formats as an alternative to the I420,
Y42B, Y444 formats
- removed all of the system frame number tracking code, since it is
unnecessary; Instead, the libimxvpuapi's context fields are used to
associate input/output frames with GstVideoCodecFrame system frame
numbers
- fix memory leaks related to missing buffer pool unref'ing
* imxv4l2videosrc:
- support for crop metadata
- element uses the width, height, etc. of the format that the device
actually uses during operation (instead of default values)
- autofocus control support via GstPhotography
- fix incorrect GLib warnings
- fix segmentation fault when shutting down the element
* eglvivsink:
- remove extra g_free() calls, which lead to runtime errors
- remove GLESv2 VIVANTE link dependencies
- add Android platform
- manually retrieve VIV direct texture functions
with this and the link dependency elimination, this means that for
platforms except the framebuffer one, no Vivante specific headers
and libraries are needed anymore
- fix blocking issue in the Wayland platform mainloop
* improved and expanded documentation
* pxp: NV16 *is* supported after all (it was actually a bug in GStreamer
pre-1.5.91)
NOTE: this does not break compatibility with GStreamer versions older
than 1.5.91
* compositor: Update backported aggregator code to GStreamer 1.6
* blitter:
- error handling improvements
- add missing buffer pool unref'ing, which lead to memory leaks
- add missing compositor dependency to blitter base
* uniaudio:
- only build the uniaudio plugin if at least one codec was found
during configuration
- disable plugin if the gstaudio library is not available
- add AAC profile field to the sink caps with GStreamer >= 1.4.4 to
ensure the uniaudio decoder is only used for AAC-LC data
* ipu: increase fill frame width from 8 to 64 pixels to make IPU fill
operations work with pre-3.14 Freescale kernels
* g2d: use padding pixels when setting surface parameters, fixing G2D
failures with frame sizes that aren't aligned
* wscript:
- improve Android support
- fix installation paths for the common, blitter, compositor libraries
This is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/cf7a088
However this package now offers a more flexible approach because it can
be built without the GPU or VPU elements for devices based on SoCs that
lack those features like the new i.MX7.
Tested with the following commands on i.MX6Q (IPU):
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxeglvivsink
Tested with the following commands on i.MX6SX (PXP):
# gst-launch-1.0 imxv4l2videosrc device=/dev/video1 ! imxpxpvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Peter Seiderer <ps.report at gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a library for using the i.MX6 VPU. It is an alternative to
libfslvpuwrap, hosted on Github, and has an API that features several
improvements over libfslvpuwrap, which include:
* User-defined context information associated with input frames, which
is passed on to corresponding output frames (to be able to identify
which input frame produced which output frame)
* Groundwork for future DMA-BUF/BMM/ION/CMA allocator integration, using
file descriptors instead of physical addresses
* Indicators for when it is safe to try to decode frames, which is
critical in multi-threaded playback cases
* Simplified, higher-level JPEG en/decoding API, based on the VPU MJPEG
codec; useful for picture viewing without the extra boilerplate for
VPU-based en/decoding
Changelog 0.10.0 -> 0.10.1:
- add debian packaging files
- update waf to version 1.8.16
- add workaround in wscript to prevent stale pkg-config .pc files
- fix memory leak by adding missing IOFreeVirtMem() call in vpulib
backend
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/e519d6chttps://github.com/Freescale/meta-fsl-arm/commit/1dd6a5b
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update libaio from 0.3.108 to 0.3.110. This adds AArch64 support.
The 0001-arches.patch is simplified to only add MIPS definitions: the
SPARC support has been merged upstream, and we don't need the m68k and
parisc support.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas:
- respect alphabetic ordering in the definition of
BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS
- add more details in the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libuuid was compiled before, syslog-ng will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/libsyslog-ng-3.7.so.0.0.0 | grep NEEDED | sort
[...]
0x0000000000000001 (NEEDED) Shared library: [libuuid.so.1]
The build system offers no option to en-/disable libuuid support:
https://github.com/balabit/syslog-ng/blob/master/configure.ac#L1291
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libcap was compiled before, syslog-ng will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/sbin/syslog-ng | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libcap.so.2]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The unversioned library was missing in the build system, part of the fix
was backported from upstream, the final patch was sent upstream.
Fixes linking against gpm by the links package which fails to detect
gpm support when libgpm.so is not present.
Configure log from links without this patch:
checking for gpm.h... yes
checking for Gpm_Open in -lgpm... no
checking for Gpm_GetLibVersion... no
Configure log from links with this patch:
checking for gpm.h... yes
checking for Gpm_Open in -lgpm... yes
checking for Gpm_GetLibVersion... yes
checking for Gpm_Event wdx and wdy... yes
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When keyutils was compiled before, cifs-utils will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/cifscreds | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libkeyutils.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When e2fsprogs was compiled before, quota will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/sbin/quotacheck | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libcom_err.so.2]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
0x0000000000000001 (NEEDED) Shared library: [libext2fs.so.2]
0x0000000000000001 (NEEDED) Shared library: [libintl.so.8]
Quote from configure log before this patch when e2fsprogs were missing:
checking ext2fs/ext2fs.h usability... no
checking ext2fs/ext2fs.h presence... no
checking for ext2fs/ext2fs.h... no
checking for com_err in -lcom_err... no
checking for ext2fs_initialize in -lext2fs... no
configure: WARNING: Ext2 direct support won't be compiled. Libraries not found.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When xz was compiled before, kexec will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/sbin/kdump | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [liblzma.so.5]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
The version bump to 2.0.11 is needed to fix a configure script issue:
line 4712: ac_fn_c_try_link: command not found
This issue was fixed by upstream commit
http://git.kernel.org/cgit/utils/kernel/kexec/kexec-tools.git/commit/configure.ac?id=58bbd468571b3e80585e5d68e97c8d67c8ed583b,
which was merged after 2.0.9 was released.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: bump version instead of doing a "hack" to force the use of
the lzma library.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: udev was already handled as an optional dependency, Bernd's
patch only made it explicit by using
--enable-libudev/--disable-libudev.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When pcre was compiled before, zsh will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/bin/zsh | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libgdbm.so.4]
0x0000000000000001 (NEEDED) Shared library: [libpcre.so.1]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libcap was compiled before, zsh will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/bin/zsh | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libgdbm.so.4]
0x0000000000000001 (NEEDED) Shared library: [libcap.so.2]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When gdbm was compiled before, zsh will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/bin/zsh | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libgdbm.so.4]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When gdbm was compiled before, openipmi will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/ipmi_sim | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libgdbm.so.4]
[...]
The build system offers no option to en-/disable gdbm support,
check configure.ac, line 309+
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When elfutils was compiled before, pure-ftpd will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/sbin/pure-ftpd | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libelf.so.1]
0x0000000000000001 (NEEDED) Shared library: [libcrypt.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
The build system offers no option to en-/disable elfutils support,
check m4/getloadavg.m4, line 44.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When attr was compiled before, patch will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/patch | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [libattr.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When acl was compiled before, vim will use it as optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/vim | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libacl.so.1]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When expat was compiled before, the proto-http module will use it as
optional dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/lftp/4.6.4/proto-http.so | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libcrypto.so.1.0.0]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libexpat.so.1]
[...]
The build system offers no option to en-/disable expat support:
https://github.com/lavv17/lftp/blob/lftp-4.6-stable/configure.ac#L337
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: add missing dependency of host-gutenprint on host-pkgconf,
needed since configure.ac uses PKG_CHECK_MODULES and the package is
autoreconfigured.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 8461906d (package/libsoil: fix build using old versions of patch)
added a workaround for older patch versions, but didn't add any comment in
the .mk file explaining why this is done.
Add a comment explaining why for clarity.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- add dependency on erlang-p1-utils, as noticed by Romain Naour.
- the license is now Apache-2.0 and no longer GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license of erlang-p1-tls is indeed GPLv2+ as indicated in
ERLANG_P1_TLS_LICENSE, but this GPLv2+ carries an OpenSSL exception,
which allows it to be linked against the OpenSSL library. Therefore,
we update the license information accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- do only the version bump, not the package rename, as suggested by
Romain Naour
- erlang-p1-stun continues to depend on erlang-p1-tls, not
erlang-fast_tls.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version includes C++ code, so also add dependency on a C++
compiler.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- propagate new C++ dependency to ejabberd, as noticed by
Romain Naour
- fix license information and license files. Not all the code is
under the TCL license, in fact most of the code is under the
Apache-2.0 license, and some additional license files have been
added to clarify this.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The erlang-rebar package uses ERLANG_ as the prefix for its license
variables, therefore overriding the license information from the
erlang package. This commit fixes this by using the appropriate
ERLANG_REBAR_ suffix.
Reported-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously only the C compiler path and options were passed to rebar.
Erlang projects that used the C++ compiler would fail to build, which
would for example be the case with the latest version of
erlang-p1-stringprep. This fixes those errors.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: adjust commit message to indicate an example of an Erlang
package that needs the C++ compiler.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a major release of Erlang that includes a licensing change from
the EPL to the Apache License, significant changes to the timer APIs, better
support for large maps, and security improvements.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-crossbar package was not added at the right location, so
this commit fixes the alphabetic ordering.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- Remove dependency on having .py files, since building/testing with
.pyc files only was successful.
- Remove the "# runtime" comment for all dependencies, and only
mention it once before all "select".
- Add missing dependencies on: BR2_PACKAGE_PYTHON_PYCPARSER and
BR2_PACKAGE_PYTHON_LMDB.
- Use AGPLv3 for the license instead of AGPL3.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: remove dependency on having .py files, since it builds fine
and imports fine with .pyc files only.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- remove python-six from the build dependencies, it is only a runtime
dependency
- add host-python-cffi in the build dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix musl build by removing inclusion of sys/cdefs.h.
Patch was backported from upstream master and can be dropped in the
next version bump.
Update homepage link
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds basic configuration files for the Firefly RK3288 board.
Both minimal and demo defconfigs are added. The latter enables Qt5 with
the required Mali T76X GPU user space components.
More info about the board:
http://en.t-firefly.com/en/firenow/firefly_rk3288/specifications/
[Peter: use same-as-kernel for kernel headers]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package provides the binary user-space components for the ARM Mali
Midgard T76X GPU.
Note that this package requires a kernel with the ARM Mali Midgard GPU
Kernel Drivers enabled.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also:
* switch download site to github as the previous download page is not
maintained anymore
* drop 0004-no-gtk-deprecations.patch as it is applied upstream
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license information: it is either Apache-2.0 *or* BSD-3c
- add the LICENSE file to the list of license files, since it is the
one that explains that the license is either Apache-2.0 or BSD-3c.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- switch to Github, which has a LICENSE file. The issue was reported
upstream: https://github.com/dw/py-lmdb/issues/108. Then added the
<pkg>_LICENSE_FILES variable.
- bump version to 0.89 (instead of 0.88)
- indicate the proper license, following the SPDX code for the
OpenLDAP 2.8 license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes [1]:
mouse.cpp: In function 's32 open_gpm(Gpm_Connect*)':
mouse.cpp:58:37: error: 'memset' was not declared in this scope
memset((s8 *)&addr, 0, sizeof(addr));
^
mouse.cpp:60:64: error: 'strncpy' was not declared in this scope
strncpy(addr.sun_path, GPM_NODE_CTL, sizeof(addr.sun_path) - 1);
in case BR2_PACKAGE_GPM is defined.
Add proper gpm dependency and configure option too.
[1] http://autobuild.buildroot.net/results/a60/a602d61e68f662217ad868de79711a8ea892a3a9
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
upmpdcli version 1.1.0 requires libupnpp version 0.14.1.
Also adjust the installation of the config file. It is renamed to upmpdcli.conf-dist
in the sources, but we install it as upmpdcli.conf as usual.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-math-link.patch as some added code render it useless.
Rework 0002-cmake-disable-shared-library-build-when-BUILD_SHARED.patch
because it did not apply anymore.
This patch is already in a PR upstream.
Add 0001-cmake-uClibc-Fix-missing-libm-for-tests.patch, to fix a build
error with uClibc toolchain.
This has been sent upstream:
https://github.com/lloyd/yajl/pull/184
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for building NVME utility - a utility for interacting with
standard NVM Express (optimized PCI Express SSD interface) devices.
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MT7601u is a MediaTek Wifi 802.11n dongle
(New chipset from the combined ralink/mediaTek company)
Signed-off-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0003-Problem-return-code-of-sodium_init-is-not-checked.patch since
it's in this release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which also means moving from unstable->stable (odd numbers in gnome
project packages are development).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which also means moving from unstable->stable (odd numbers in gnome
project packages are development).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which also means moving from unstable->stable (odd numbers on gnome
project packages are development).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-10 18:07:34 +01:00
4478 changed files with 79552 additions and 50658 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
