Update for 2016.11-rc3

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES

@@ -1,3 +1,64 @@
+2016.11-rc3, Released November 28th, 2016
+
+	Fixes all over the tree, including a number of security fixes.
+
+	The move from fakeroot to pseudo unfortunately brought a
+	number of issues.  The SELinux issue described in #9386 which
+	triggered the move to pseudo has been investigated further and
+	a workaround implemented and the pseudo changes reverted.
+
+	Linux kernel: update default to 4.8.11.
+
+	Defconfigs: Updates/fixes for imx28ek, mx6udoo, imx6ulpico,
+	olimex a20 olinuxino lime malo, roseapplepi, synopsis aarch64
+	vdk, axs101, axs103 and hs38 smd vdk.
+
+	Updated/fixed packages: autossh, chrony, dosfstools,
+	dtv-scan-tables, e2fsprogs, gcc, gdb, gnuchess, gnuradio,
+	gpsd, gst1-plugins-bad, gst1-plugins-good, imagemagick,
+	kvm-unit-tests, libfribi, libuv, mesa3d, mpfr, mplayer, mpv,
+	ntp, ola, olsr, openblas, openjpeg, openssh, postgresql,
+	ptpd2python3, qemu, qextserialport, qt5base, quagga, xqwt,
+	taskd, tiff, tremor, trousers, udisks, uclibc, wireshark,
+	xapp_xload, xenomai, xmlstarlet
+
+	Issues resolved (http://bugs.buildroot.org):
+
+	#9386: ubinize fails with or without custom config
+	#9431: A misspelling
+	#9446: make raspberrypi3_defconfig compilation failure
+
+2016.11-rc2, Released November 13th, 2016
+
+	Fixes all over the tree.
+
+	Architecture: add support for MIPS XBurst cores; remove MIPS
+	support for M5100 cores.
+
+	Updated/fixed packages: mesa3d, lttng-babeltrace, tinyalsa, pseudo,
+	czmq, libxml2, makedevs, binutils, kvm-unit-tests, libnss, privoxy,
+	qemu, ser2net, net-tools, ffmpeg, assimp, libmpeg2, ccache, mpv,
+	libxslt, python, python3, php, valgrind, guile, domoticz, efl,
+	jasper, kvmtool, go, wget, sane-backends, weston, tinymembench,
+	strace, openjpeg, lcms2, quota.
+
+	Linux kernel: update default to 4.8.7.
+
+	CMake support: fix cmake wrapper to properly pass NDEBUG flag.
+
+	Filesystems: use a wrapper to pseudo, to better mimick the behaviour
+	of fakeroot; makedevs no longer breaks of the destination already
+	exists and is of the correct type/major/minor.
+
+	Defconfigs: a few legacy and broken defconfigs have been removed
+	because they now fail to build: kb9202_defconfig, mini2440_defconfig,
+	freescale_p2020ds, qmx6, calao*, atmel_sama5d4ek. Other defconfigs
+	have been updated: nanopi-neo, olimex_a20_olinuxino_lime_mali,
+	armadeus_apf51, armadeus_apf28, freescale_imx31_3stack, ci20,
+	olimex_a20_olinuxino_lime2, atmel_at91sam9260eknf,
+	atmel_at91sam9rlek, atmel_at91sam9g20dfc, atmel_at91sam9g45m10ek,
+	atmel_sama5d3xek.
+
 2016.11-rc1, Released November 3rd, 2016
 
 	Fixes all over the tree and new features.

DEVELOPERS

@@ -338,6 +338,7 @@ N:	Cédric Chépied <cedric.chepied@gmail.com>
 F:	package/znc/
 
 N:	Cyril Bur <cyrilbur@gmail.com>
+F:	arch/Config.in.powerpc
 F:	package/kvm-unit-tests
 
 N:	Dagg Stompler <daggs@gmx.com>
@@ -568,14 +569,6 @@ F:	package/libsrtp/
 F:	package/libwebsock/
 F:	package/sofia-sip/
 
-N:	Gregory Hermant <gregory.hermant@calao-systems.com>
-F:	package/bcusdk/
-F:	package/dfu-util/
-F:	package/libpthsem/
-F:	package/linknx/
-F:	package/snowball-hdmiservice/
-F:	package/ux500-firmware/
-
 N:	Guillaume Gardet <guillaume.gardet@oliseo.fr>
 F:	package/c-icap/
 F:	package/c-icap-modules/
@@ -1647,6 +1640,7 @@ F:	package/modem-manager/
 F:	package/nuttcp/
 F:	package/parted/
 F:	package/python*
+F:	package/ser2net/
 F:	package/socketcand/
 F:	package/qt5/qt5serialbus/
 F:	package/sdparm/

Makefile

@@ -83,7 +83,7 @@ else # umask / $(CURDIR) / $(O)
 all:
 
 # Set and export the version string
-export BR2_VERSION := 2016.11-rc1
+export BR2_VERSION := 2016.11-rc3
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -641,7 +641,7 @@ target-finalize: $(PACKAGES)
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
-	find $(TARGET_DIR)/lib $(TARGET_DIR)/usr/lib $(TARGET_DIR)/usr/libexec \
+	find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
 		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
@@ -663,13 +663,13 @@ endif
 # besides the one in which crash occurred; or SIGTRAP kills my program when
 # I set a breakpoint"
 ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
-	find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
+	find $(TARGET_DIR)/lib/ -type f -name 'libpthread*.so*' | \
 		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 endif
 
 # Valgrind needs ld.so with enough information, so only strip
 # debugging symbols.
-	find $(TARGET_DIR)/lib -type f -name 'ld-*.so*' | \
+	find $(TARGET_DIR)/lib/ -type f -name 'ld-*.so*' | \
 		xargs -r $(STRIPCMD) $(STRIP_STRIP_DEBUG)
 	test -f $(TARGET_DIR)/etc/ld.so.conf && \
 		{ echo "ERROR: we shouldn't have a /etc/ld.so.conf file"; exit 1; } || true
@@ -928,7 +928,7 @@ clean:
 		$(LEGAL_INFO_DIR) $(GRAPHS_DIR)
 
 distclean: clean
-ifeq ($(O),output)
+ifeq ($(O),$(CURDIR)/output)
 	rm -rf $(O)
 endif
 	rm -rf $(TOPDIR)/dl $(BR2_CONFIG) $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/..config.tmp \

arch/Config.in.mips

@@ -47,22 +47,31 @@ config BR2_mips_interaptiv
 	bool "interAptiv"
 	depends on !BR2_ARCH_IS_64
 	select BR2_MIPS_CPU_MIPS32R2
-config BR2_mips_m5100
-	bool "M5100"
+config BR2_mips_m5150
+	bool "M5150"
 	depends on !BR2_ARCH_IS_64
 	select BR2_MIPS_CPU_MIPS32R5
-config BR2_mips_m5101
-	bool "M5101"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-config BR2_mips_m6201
-	bool "M6201"
+config BR2_mips_m6250
+	bool "M6250"
 	depends on !BR2_ARCH_IS_64
 	select BR2_MIPS_CPU_MIPS32R6
 config BR2_mips_p5600
 	bool "P5600"
 	depends on !BR2_ARCH_IS_64
 	select BR2_MIPS_CPU_MIPS32R5
+config BR2_mips_xburst
+	bool "XBurst"
+	depends on !BR2_ARCH_IS_64
+	select BR2_MIPS_CPU_MIPS32R2
+	help
+	  The Ingenic XBurst is a MIPS32R2 microprocessor. It has a
+	  bug in the FPU that can generate incorrect results in
+	  certain cases. The problem shows up when you have several
+	  fused madd instructions in sequence with dependant
+	  operands. This requires the -mno-fused-madd compiler option
+	  to be used in order to prevent emitting these instructions.
+
+	  See http://www.ingenic.com/en/?xburst.html
 config BR2_mips_64
 	bool "Generic MIPS64"
 	depends on BR2_ARCH_IS_64
@@ -133,10 +142,10 @@ config BR2_GCC_TARGET_ARCH
 	default "mips32r5"	if BR2_mips_32r5
 	default "mips32r6"	if BR2_mips_32r6
 	default "interaptiv"	if BR2_mips_interaptiv
-	default "m5100"		if BR2_mips_m5100
-	default "m5101"		if BR2_mips_m5101
-	default "m6201"		if BR2_mips_m6201
+	default "m5101"		if BR2_mips_m5150
+	default "m6201"		if BR2_mips_m6250
 	default "p5600"		if BR2_mips_p5600
+	default "mips32r2"	if BR2_mips_xburst
 	default "mips64"	if BR2_mips_64
 	default "mips64r2"	if BR2_mips_64r2
 	default "mips64r5"	if BR2_mips_64r5

board/armadeus/apf51/linux-4.4.config

@@ -20,7 +20,7 @@ CONFIG_BSD_DISKLABEL=y
 # CONFIG_IOSCHED_CFQ is not set
 CONFIG_ARCH_MXC=y
 CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_MACH_IMX51_DT=y
+CONFIG_SOC_IMX51=y
 CONFIG_ARM_THUMBEE=y
 CONFIG_PREEMPT=y
 CONFIG_AEABI=y
@@ -111,7 +111,9 @@ CONFIG_KEYBOARD_GPIO=m
 CONFIG_KEYBOARD_IMX=m
 CONFIG_INPUT_TOUCHSCREEN=y
 CONFIG_TOUCHSCREEN_WM831X=y
+CONFIG_TOUCHSCREEN_MC13XXX=m
 CONFIG_INPUT_MISC=y
+CONFIG_INPUT_MC13783_PWRBUTTON=m
 CONFIG_INPUT_UINPUT=m
 CONFIG_INPUT_WM831X_ON=y
 # CONFIG_LEGACY_PTYS is not set
@@ -127,19 +129,24 @@ CONFIG_SPI_IMX=y
 CONFIG_SPI_SPIDEV=m
 CONFIG_GPIO_SYSFS=y
 CONFIG_GPIO_WM831X=m
-CONFIG_POWER_SUPPLY=m
+CONFIG_POWER_SUPPLY=y
 CONFIG_WM831X_BACKUP=m
 CONFIG_WM831X_POWER=m
 CONFIG_HWMON=m
 CONFIG_SENSORS_AS1531=m
+CONFIG_SENSORS_MC13783_ADC=m
 CONFIG_SENSORS_WM831X=m
 CONFIG_WATCHDOG=y
 CONFIG_WATCHDOG_NOWAYOUT=y
 CONFIG_WM831X_WATCHDOG=m
 CONFIG_IMX2_WDT=y
+CONFIG_MFD_MC13XXX_I2C=y
 CONFIG_MFD_WM831X_I2C=y
 CONFIG_REGULATOR=y
 CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_MC13892=m
+CONFIG_IMX_IPUV3_CORE=y
+CONFIG_DRM=y
 CONFIG_MFD_IMX_IPU_V3=y
 CONFIG_MEDIA_SUPPORT=m
 CONFIG_VIDEO_DEV=m
@@ -203,12 +210,13 @@ CONFIG_USB_PRINTER=y
 CONFIG_USB_WDM=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
 CONFIG_USB_CHIPIDEA_HOST=y
 CONFIG_USB_PHY=y
 CONFIG_NOP_USB_XCEIV=y
 CONFIG_USB_GPIO_VBUS=y
 CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET=y
 CONFIG_USB_GADGET_DEBUG_FILES=y
 CONFIG_USB_GADGET_DEBUG_FS=y
 CONFIG_USB_ETH=m
@@ -227,12 +235,19 @@ CONFIG_NEW_LEDS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
 CONFIG_LEDS_WM831X_STATUS=m
+CONFIG_LEDS_MC13783=m
 CONFIG_LEDS_TRIGGERS=y
 CONFIG_LEDS_TRIGGER_HEARTBEAT=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_MXC=y
 CONFIG_RTC_DRV_WM831X=y
+CONFIG_RTC_DRV_MC13XXX=m
 CONFIG_STAGING=y
+CONFIG_DRM_IMX=y
+CONFIG_DRM_IMX_FB_HELPER=y
+CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
+CONFIG_DRM_IMX_TVE=y
+CONFIG_DRM_IMX_IPUV3=y
 CONFIG_IIO=m
 CONFIG_EXT2_FS=y
 CONFIG_EXT2_FS_XATTR=y
@@ -242,6 +257,7 @@ CONFIG_EXT2_FS_XIP=y
 CONFIG_EXT3_FS=y
 CONFIG_EXT3_FS_POSIX_ACL=y
 CONFIG_EXT3_FS_SECURITY=y
+CONFIG_EXT4_FS=y
 CONFIG_AUTOFS4_FS=y
 CONFIG_ISO9660_FS=y
 CONFIG_JOLIET=y
@@ -249,10 +265,6 @@ CONFIG_ZISOFS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_JFFS2_LZO=y
-CONFIG_JFFS2_CMODE_NONE=y
 CONFIG_UBIFS_FS=y
 CONFIG_NFS_FS=y
 CONFIG_NFS_V3=y

board/atmel/at91sam9260ek/linux-3.9.config

@@ -1,98 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-CONFIG_KERNEL_LZO=y
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_ARCH_AT91SAM9260_SAM9XE=y
-CONFIG_MACH_AT91SAM9260EK=y
-CONFIG_MACH_CAM60=y
-CONFIG_MACH_SAM9_L9260=y
-CONFIG_MACH_AFEB9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_MACH_CPU9260=y
-CONFIG_MACH_FLEXIBITY=y
-CONFIG_MACH_SNAPPER_9260=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_GPIO=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_STORAGE_DEBUG=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ZERO=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_EXT2_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_CRAMFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/atmel/readme.txt

@@ -13,7 +13,6 @@ This guide covers the following configurations:
  - atmel_sama5d3_xplained_dev_defconfig
  - atmel_sama5d3_xplained_mmc_defconfig
  - atmel_sama5d3_xplained_mmc_dev_defconfig
- - atmel_sama5d4ek_defconfig
  - atmel_sama5d4_xplained_defconfig
  - atmel_sama5d4_xplained_dev_defconfig
  - atmel_sama5d4_xplained_mmc_defconfig

board/atmel/sama5d2_xplained_mmc/genimage.cfg

@@ -23,6 +23,7 @@ image sdcard.img {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
+		offset = 1M
 	}
 
 	partition rootfs {

board/atmel/sama5d3_xplained_mmc/genimage.cfg

@@ -23,6 +23,7 @@ image sdcard.img {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
+		offset = 1M
 	}
 
 	partition rootfs {

board/atmel/sama5d4_xplained_mmc/genimage.cfg

@@ -24,6 +24,7 @@ image sdcard.img {
 		partition-type = 0xC
 		bootable = "true"
 		image = "boot.vfat"
+		offset = 1M
 	}
 
 	partition rootfs {

board/boundarydevices/common/6x_bootscript.txt

@@ -92,14 +92,12 @@ fi
 
 setenv bootargs "${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc"
 
-bpart=1
-
 if test "sata" = "${dtype}" ; then
-	setenv bootargs "${bootargs} root=/dev/sda${bpart}" ;
+	setenv bootargs "${bootargs} root=/dev/sda${bootpart}" ;
 elif test "usb" = "${dtype}" ; then
-	setenv bootargs "${bootargs} root=/dev/sda${bpart}" ;
+	setenv bootargs "${bootargs} root=/dev/sda${bootpart}" ;
 else
-	setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bpart}"
+	setenv bootargs "${bootargs} root=/dev/mmcblk${disk}p${bootpart}"
 fi
 
 if itest.s "x" != "x${disable_giga}" ; then

board/calao/qil-a9260/linux-3.4.7.config

@@ -1,111 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_QIL_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-CONFIG_AT91_EARLY_USART0=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_MMC=y
-CONFIG_MMC_AT91=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_M41T94=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/qil-a9260/patches/at91bootstrap/0001-qil-a9260.patch

@@ -1,603 +0,0 @@
-From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Thu, 19 Jul 2012 14:19:59 +0200
-Subject: [PATCH] Add support for the Calao-systems QIL-A9260
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/qil_a9260/nandflash/Makefile    |  122 ++++++++++++++
- board/qil_a9260/nandflash/qil-a9260.h |  109 ++++++++++++
- board/qil_a9260/qil_a9260.c           |  298 +++++++++++++++++++++++++++++++++
- crt0_gnu.S                            |    7 +
- include/part.h                        |    6 +-
- 5 files changed, 541 insertions(+), 1 deletions(-)
- create mode 100644 board/qil_a9260/nandflash/Makefile
- create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
- create mode 100644 board/qil_a9260/qil_a9260.c
-
-diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
-new file mode 100644
-index 0000000..209a25f
---- /dev/null
-+++ b/board/qil_a9260/nandflash/Makefile
-@@ -0,0 +1,122 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for QIL-A9260
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9260
-+# Board name (case sensitive!!!)
-+BOARD=qil_a9260
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
-new file mode 100644
-index 0000000..c87002e
---- /dev/null
-+++ b/board/qil_a9260/nandflash/qil-a9260.h
-@@ -0,0 +1,109 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : qil-a9260.h
-+ * Object              :
-+ * Creation            : GH July 19th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _QIL_A9260_H
-+#define _QIL_A9260_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
-+/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
-+
-+#define MACH_TYPE       	0x6AF		/* QIL-A9260 */
-+#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+
-+#endif	/* _QIL_A9260_H */
-diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
-new file mode 100644
-index 0000000..ae122e7
---- /dev/null
-+++ b/board/qil_a9260/qil_a9260.c
-@@ -0,0 +1,298 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : qil_a9260.c
-+ * Object              :
-+ * Creation            : GH July 19th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA = 2 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_2 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
-+
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_DATAFLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase DataFlash Page 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..bbd33fe 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -35,7 +35,11 @@
- 
- #ifdef AT91SAM9260
- #include "AT91SAM9260_inc.h"
--#include "at91sam9260ek.h"
-+	#ifdef at91sam9260ek
-+	#include "at91sam9260ek.h"
-+	#elif qil_a9260
-+	#include "qil-a9260.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9XE
--- 
-1.5.6.3
-

board/calao/qil-a9260/patches/barebox/0001-qil-a9260.patch

@@ -1,36 +0,0 @@
-From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Fri, 3 Aug 2012 11:25:49 +0200
-Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- arch/arm/boards/qil-a9260/init.c |    6 ++++++
- 1 files changed, 6 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
-index 305d733..b43cace 100644
---- a/arch/arm/boards/qil-a9260/init.c
-+++ b/arch/arm/boards/qil-a9260/init.c
-@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
- static int qil_a9260_console_init(void)
- {
- 	at91_register_uart(0, 0);
-+	at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
-+
- 	at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
- 			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
- 			   | ATMEL_UART_RI);
-+
- 	at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+	at91_set_A_periph(AT91_PIN_PB7, 1);	/* Enable pull-up on RXD1 */
-+
- 	at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
-+	at91_set_A_periph(AT91_PIN_PB9, 1);	/* Enable pull-up on RXD2 */
- 
- 	return 0;
- }
--- 
-1.5.6.3
-

board/calao/qil-a9260/patches/linux/0001-qil-a9260.patch

@@ -1,27 +0,0 @@
-From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Fri, 3 Aug 2012 16:45:37 +0200
-Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- arch/arm/mach-at91/board-qil-a9260.c |    2 +-
- 1 files changed, 1 insertions(+), 1 deletions(-)
-
-diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
-index bf351e2..c0df05c 100644
---- a/arch/arm/mach-at91/board-qil-a9260.c
-+++ b/arch/arm/mach-at91/board-qil-a9260.c
-@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
- static struct spi_board_info ek_spi_devices[] = {
- #if defined(CONFIG_RTC_DRV_M41T94)
- 	{	/* M41T94 RTC */
--		.modalias	= "m41t94",
-+		.modalias	= "rtc-m41t94",
- 		.chip_select	= 0,
- 		.max_speed_hz	= 1 * 1000 * 1000,
- 		.bus_num	= 0,
--- 
-1.5.6.3
-

board/calao/tny-a9g20-lpw/at91bootstrap-1.16-tny-a9g20-lpw.patch

@@ -1,551 +0,0 @@
-From 53bd82b122f4530a98cba45795832820bb1d0b45 Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Mon, 13 Aug 2012 11:26:10 +0200
-Subject: [PATCH] Add support for the Calao-systems TNY-A9G20-LPW
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/tny_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++++
- board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h |  114 ++++++++++++
- board/tny_a9g20_lpw/tny_a9g20_lpw.c           |  243 +++++++++++++++++++++++++
- crt0_gnu.S                                    |    6 +
- include/part.h                                |    6 +-
- 5 files changed, 489 insertions(+), 1 deletion(-)
- create mode 100644 board/tny_a9g20_lpw/nandflash/Makefile
- create mode 100644 board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
- create mode 100644 board/tny_a9g20_lpw/tny_a9g20_lpw.c
-
-diff --git a/board/tny_a9g20_lpw/nandflash/Makefile b/board/tny_a9g20_lpw/nandflash/Makefile
-new file mode 100644
-index 0000000..7efbea7
---- /dev/null
-+++ b/board/tny_a9g20_lpw/nandflash/Makefile
-@@ -0,0 +1,121 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for AT91SAM9260EK
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9G20
-+# Board name (case sensitive!!!)
-+BOARD=tny_a9g20_lpw
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
-new file mode 100644
-index 0000000..b1f8a1d
---- /dev/null
-+++ b/board/tny_a9g20_lpw/nandflash/tny-a9g20-lpw.h
-@@ -0,0 +1,114 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2008, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : tny-a9g20-lpw.h
-+ * Object              :
-+ * Creation            : GH August 13th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _TNY_A9G20_LPW_H
-+#define _TNY_A9G20_LPW_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(100000000)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+/* set PLLA to 800Mhz from MAINCK= 12Mhz MULA=199 (0xC7+1= 200), DIVA=0x03 (Fplla=12Mhz x [(199+1)/3]=800Mhz) */
-+#define PLLA_SETTINGS   0x20C73F03
-+#define PLLB_SETTINGS   0x100F3F02
-+
-+/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
-+/* LP-SDRAM (fmax=100Mhz) PDIV=0 => PRESCALER CLK=PCLK; */
-+/* MDIV = 2 => PRESCALER CLK / 4 = MCLK=100Mhz */
-+/* PRESCALER CLK = PLLA (800Mhz) / 2 (PRES=1) = 400Mhz */
-+#define MCKR_SETTINGS           0x0204 
-+#define MCKR_CSS_SETTINGS       (AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 100000000.*/
-+/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
-+
-+#define MACH_TYPE		0x80B			/* TNY-A9G20 */
-+#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define	CFG_SDRAM
-+#define	CFG_HW_INIT
-+
-+#endif	/* _TNY_A9G20_LPW_H */
-diff --git a/board/tny_a9g20_lpw/tny_a9g20_lpw.c b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
-new file mode 100644
-index 0000000..cef9055
---- /dev/null
-+++ b/board/tny_a9g20_lpw/tny_a9g20_lpw.c
-@@ -0,0 +1,243 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2008, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : tny_a9g20_lpw.c
-+ * Object              :
-+ * Creation            : GH August 13th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA/2 = 3 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix (slow slew rate enabled and LPSDRAM memory voltage = 1.8V) */
-+	writel(((readl(AT91C_BASE_CCFG + CCFG_EBICSA)) | AT91C_EBI_CS1A_SDRAMC | (1<<17)) & ~0x00010000, AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_3 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+                                AT91C_SDRAMC_MD_LOW_POWER_SDRAM); /* SDRAM (low power)   */
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if BP4 is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc bp4_pio[] = {
-+		{"BP4", AT91C_PIN_PA(31), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(bp4_pio);
-+	
-+	/* If BP4 is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PA(31)) )
-+		AT91F_NandEraseBlock0();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..c6cd49d 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,12 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..ab79af1 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -46,7 +46,11 @@
- 
- #ifdef AT91SAM9G20
- #include "AT91SAM9260_inc.h"
--#include "at91sam9g20ek.h"
-+	#ifdef at91sam9g20ek
-+	#include "at91sam9g20ek.h"
-+	#elif tny_a9g20_lpw
-+	#include "tny-a9g20-lpw.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9261
--- 
-1.7.9.5
-

board/calao/tny-a9g20-lpw/linux-3.9.config

@@ -1,187 +0,0 @@
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_EMBEDDED=y
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_LBDAF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_SOC_AT91SAM9260=y
-CONFIG_SOC_AT91SAM9263=y
-CONFIG_SOC_AT91SAM9G45=y
-CONFIG_SOC_AT91SAM9X5=y
-CONFIG_SOC_AT91SAM9N12=y
-CONFIG_MACH_AT91SAM_DT=y
-CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
-CONFIG_AT91_TIMER_HZ=128
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
-CONFIG_KEXEC=y
-CONFIG_AUTO_ZRELADDR=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET6_XFRM_MODE_BEET is not set
-CONFIG_IPV6_SIT_6RD=y
-# CONFIG_WIRELESS is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_STANDALONE is not set
-# CONFIG_PREVENT_FIRMWARE_BUILD is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_GLUEBI=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_RAM_COUNT=4
-CONFIG_BLK_DEV_RAM_SIZE=8192
-CONFIG_ATMEL_PWM=y
-CONFIG_ATMEL_TCLIB=y
-CONFIG_EEPROM_93CX6=m
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-# CONFIG_SCSI_LOWLEVEL is not set
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-CONFIG_DAVICOM_PHY=y
-CONFIG_MICREL_PHY=y
-# CONFIG_WLAN is not set
-CONFIG_INPUT_POLLDEV=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_SERIO is not set
-CONFIG_LEGACY_PTY_COUNT=4
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-CONFIG_WATCHDOG=y
-CONFIG_AT91SAM9X_WATCHDOG=y
-CONFIG_SSB=m
-CONFIG_FB=y
-CONFIG_FB_MODE_HELPERS=y
-CONFIG_FB_ATMEL=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_BACKLIGHT_ATMEL_LCDC=y
-# CONFIG_BACKLIGHT_GENERIC is not set
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_FONT_ACORN_8x8=y
-CONFIG_FONT_MINI_4x6=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_ACM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_GENERIC=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_AT91=m
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_ACM_MS=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_MMC=y
-CONFIG_MMC_ATMELMCI=y
-CONFIG_MMC_SPI=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_AT91RM9200=y
-CONFIG_RTC_DRV_AT91SAM9=y
-CONFIG_DMADEVICES=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_STRIP_ASM_SYMS=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_CRYPTO_ECB=y
-CONFIG_CRYPTO_ARC4=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_USER_API_HASH=m
-CONFIG_CRYPTO_USER_API_SKCIPHER=m
-# CONFIG_CRYPTO_HW is not set
-CONFIG_CRC_CCITT=m
-CONFIG_AVERAGE=y

board/calao/usb-a9260/at91bootstrap-1.16-usb-a9260.patch

@@ -1,603 +0,0 @@
-From 43e8c90f13806405bde8eaaf3a956d0ddc806f64 Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Tue, 2 Oct 2012 09:19:15 +0200
-Subject: [PATCH] Add support for the USB-A9260
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/usb_a9260/nandflash/Makefile    |  122 ++++++++++++++
- board/usb_a9260/nandflash/usb-a9260.h |  109 ++++++++++++
- board/usb_a9260/usb_a9260.c           |  298 +++++++++++++++++++++++++++++++++
- crt0_gnu.S                            |    7 +
- include/part.h                        |    6 +-
- 5 files changed, 541 insertions(+), 1 deletion(-)
- create mode 100644 board/usb_a9260/nandflash/Makefile
- create mode 100644 board/usb_a9260/nandflash/usb-a9260.h
- create mode 100644 board/usb_a9260/usb_a9260.c
-
-diff --git a/board/usb_a9260/nandflash/Makefile b/board/usb_a9260/nandflash/Makefile
-new file mode 100644
-index 0000000..02f4b50
---- /dev/null
-+++ b/board/usb_a9260/nandflash/Makefile
-@@ -0,0 +1,122 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for USB-A9260
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9260
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9260
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/usb_a9260/nandflash/usb-a9260.h b/board/usb_a9260/nandflash/usb-a9260.h
-new file mode 100644
-index 0000000..2aaf759
---- /dev/null
-+++ b/board/usb_a9260/nandflash/usb-a9260.h
-@@ -0,0 +1,109 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9260.h
-+ * Object              :
-+ * Creation            : GH Oct 1th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9260_H
-+#define _USB_A9260_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
-+/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
-+
-+#define MACH_TYPE       	0x6AD		/* USB-A9260 */
-+#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+
-+#endif	/* _USB_A9260_H */
-diff --git a/board/usb_a9260/usb_a9260.c b/board/usb_a9260/usb_a9260.c
-new file mode 100644
-index 0000000..de30f0b
---- /dev/null
-+++ b/board/usb_a9260/usb_a9260.c
-@@ -0,0 +1,298 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb_a9260.c
-+ * Object              :
-+ * Creation            : GH Oct 1th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA = 2 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_2 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
-+
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_DATAFLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase DataFlash Page 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..212789f 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -35,7 +35,11 @@
- 
- #ifdef AT91SAM9260
- #include "AT91SAM9260_inc.h"
--#include "at91sam9260ek.h"
-+	#ifdef at91sam9260ek
-+	#include "at91sam9260ek.h"
-+	#elif usb_a9260
-+	#include "usb-a9260.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9XE
--- 
-1.7.9.5
-

board/calao/usb-a9260/linux-3.7.4.config

@@ -1,97 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9260=y
-CONFIG_MACH_USB_A9260=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch

@@ -1,851 +0,0 @@
-From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Thu, 5 Jul 2012 18:44:07 +0200
-Subject: [PATCH] Add support for the Calao-systems USB-A9263
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/usb_a9263/dataflash/Makefile    |  115 +++++++++++++
- board/usb_a9263/dataflash/usb-a9263.h |   97 +++++++++++
- board/usb_a9263/nandflash/Makefile    |  117 ++++++++++++++
- board/usb_a9263/nandflash/usb-a9263.h |  116 +++++++++++++
- board/usb_a9263/usb_a9263.c           |  285 +++++++++++++++++++++++++++++++++
- crt0_gnu.S                            |    7 +
- driver/dataflash.c                    |    6 +-
- include/part.h                        |    6 +-
- 8 files changed, 745 insertions(+), 4 deletions(-)
- create mode 100644 board/usb_a9263/dataflash/Makefile
- create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
- create mode 100644 board/usb_a9263/nandflash/Makefile
- create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
- create mode 100644 board/usb_a9263/usb_a9263.c
-
-diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
-new file mode 100644
-index 0000000..332685e
---- /dev/null
-+++ b/board/usb_a9263/dataflash/Makefile
-@@ -0,0 +1,115 @@
-+# TODO: set this appropriately for your local toolchain
-+#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
-+CROSS_COMPILE=arm-elf-
-+#CROSS_COMPILE = arm-softfloat-linux-gnu-
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# DataFlashBoot Configuration for USB-A9263
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9263
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9263
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x300000
-+TOP_OF_MEMORY=0x314000
-+# Name of current directory
-+PROJECT=dataflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	dataflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+	
-+	
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	rm -f *.o *.bin *.elf *.map
-diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
-new file mode 100644
-index 0000000..40a3af8
---- /dev/null
-+++ b/board/usb_a9263/dataflash/usb-a9263.h
-@@ -0,0 +1,97 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9263.h
-+ * Object              :
-+ * Creation            : GH Jun 28th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9263_H
-+#define _USB_A9263_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* DataFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_BASE_SPI	AT91C_BASE_SPI0
-+#define AT91C_ID_SPI	AT91C_ID_SPI0
-+
-+/* SPI CLOCK */
-+#define AT91C_SPI_CLK 		 8000000
-+/* AC characteristics */
-+/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
-+#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
-+#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
-+
-+#define DF_CS_SETTINGS 		(AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
-+
-+/* ******************************************************************* */
-+/* SDRAMC Settings                                                     */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
-+#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
-+
-+#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
-+#define	IMG_SIZE			0x40000			/* Image Size in DataFlash    */
-+
-+#define MACH_TYPE       		0x6AE       		/* USB-A9263 */
-+#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+#undef	CFG_DEBUG
-+
-+#define CFG_DATAFLASH
-+
-+#endif	/* _USB_A9263_H */
-diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
-new file mode 100644
-index 0000000..c453098
---- /dev/null
-+++ b/board/usb_a9263/nandflash/Makefile
-@@ -0,0 +1,117 @@
-+# TODO: set this appropriately for your local toolchain
-+#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
-+CROSS_COMPILE=arm-elf-
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for USB-A9263
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9263
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9263
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x300000
-+TOP_OF_MEMORY=0x314000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+	
-+	
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	rm -f *.o *.bin *.elf *.map
-diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
-new file mode 100644
-index 0000000..24e2cf1
---- /dev/null
-+++ b/board/usb_a9263/nandflash/usb-a9263.h
-@@ -0,0 +1,116 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9263.h
-+ * Object              :
-+ * Creation            : GH Jun 28th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9263_H
-+#define _USB_A9263_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(180000000/2)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+#define PLLA_SETTINGS	0x20593F06
-+#define PLLB_SETTINGS	0x10483F0E
-+
-+/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
-+#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
-+#define NAND_ENABLE_CE()  do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
-+
-+/* ******************************************************************* */
-+/* SDRAMC Settings                                                     */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
-+#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
-+/* Please refer to SMC section in AT91SAM9x datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(1 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(1 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(3 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
-+#define AT91C_SM_NRD_PULSE	(3 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(5 << 0)
-+#define AT91C_SM_NRD_CYCLE	(5 << 16)
-+
-+#define AT91C_SM_TDF	        (2 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 	0x20000		/* Image Address in NandFlash */
-+#define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
-+
-+#define MACH_TYPE       0x6AE  		/* USB-A9263 */
-+#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+
-+#define CFG_HW_INIT
-+#define CFG_SDRAM
-+
-+
-+#endif	/* _USB_A9263_H */
-diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
-new file mode 100644
-index 0000000..5630f99
---- /dev/null
-+++ b/board/usb_a9263/usb_a9263.c
-@@ -0,0 +1,285 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2006, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaiimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb_a9263.c
-+ * Object              :
-+ * Creation            : GH Jun 28th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+
-+#ifdef CFG_HW_INIT
-+/*---------------------------------------------------------------------------- */
-+/* \fn    hw_init							       */
-+/* \brief This function performs very low level HW initialization	       */
-+/* This function is invoked as soon as possible during the c_startup	       */
-+/* The bss segment must be initialized					       */
-+/*---------------------------------------------------------------------------- */
-+void hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA = 2 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure the PIO controller to output PCK0 */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI0 Slave Slot Cycle to 64 */
-+	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix */
-+	/* VDDIOMSEL = 1 -> Memories are 3.3V powered */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_2 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_2 |
-+				AT91C_SDRAMC_TRC_7 |
-+				AT91C_SDRAMC_TRP_2 |
-+				AT91C_SDRAMC_TRCD_2 |
-+				AT91C_SDRAMC_TRAS_5 |
-+				AT91C_SDRAMC_TXSR_8,		/* Control Register       */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
-+#endif	/* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+
-+#ifdef CFG_SDRAM
-+//*----------------------------------------------------------------------------
-+//* \fn    sdramc_hw_init
-+//* \brief This function performs SDRAMC HW initialization
-+//*----------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the SDRAMC PIO controller */
-+	pio_setup(sdramc_pio);
-+}
-+#endif
-+
-+#ifdef CFG_DATAFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USER PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USER PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery								*/
-+/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb_pio[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb_pio);
-+	
-+	/* If USER PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC0 + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC0 + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
-+	writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
-+
-+	pio_setup(nand_pio);
-+
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
-+}
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-+
-+
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/driver/dataflash.c b/driver/dataflash.c
-index e28e49e..4de295a 100644
---- a/driver/dataflash.c
-+++ b/driver/dataflash.c
-@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
- 			pDf->dfDescription.pages_size = 264;
- 			pDf->dfDescription.page_offset = 9;
- 			break;
--
-+*/
- 		case AT45DB021B:
- 			pDf->dfDescription.pages_number = 1024;
- 			pDf->dfDescription.pages_size = 264;
- 			pDf->dfDescription.page_offset = 9;
- 			break;
- 
--		case AT45DB041B:
-+/*		case AT45DB041B:
- 			pDf->dfDescription.pages_number = 2048;
- 			pDf->dfDescription.pages_size = 264;
- 			pDf->dfDescription.page_offset = 9;
-@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
-     if (!df_init(pDf))
-         return -1;
- 
--#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
-+#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
-     /* Test if a button has been pressed or not */
-     /* Erase Page 0 to avoid infinite loop */
-     df_recovery(pDf);
-diff --git a/include/part.h b/include/part.h
-index ba5985a..a1863d0 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -61,7 +61,11 @@
- 
- #ifdef AT91SAM9263
- #include "AT91SAM9263_inc.h"
--#include "at91sam9263ek.h"
-+	#ifdef at91sam9263ek
-+	#include "at91sam9263ek.h"
-+	#elif usb_a9263
-+	#include "usb-a9263.h"
-+	#endif
- #endif
- 
- #ifdef AT91CAP9
--- 
-1.5.6.3
-

board/calao/usb-a9263/linux-3.4.4.config

@@ -1,102 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9263=y
-CONFIG_MACH_USB_A9263=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/linux-3.4.4.config

@@ -1,105 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SLAB=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_AT91=y
-CONFIG_ARCH_AT91SAM9G20=y
-CONFIG_MACH_USB_A9G20=y
-CONFIG_AT91_SLOW_CLOCK=y
-# CONFIG_ARM_THUMB is not set
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
-CONFIG_FPE_NWFPE=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ATMEL=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_MACB=y
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_EVBUG=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_SERIAL_ATMEL=y
-CONFIG_SERIAL_ATMEL_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_I2C=y
-CONFIG_I2C_GPIO=y
-CONFIG_SPI=y
-CONFIG_SPI_ATMEL=y
-# CONFIG_HWMON is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_DEVICEFS=y
-CONFIG_USB_MON=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_RV3029C2=y
-CONFIG_EXT2_FS=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_UBIFS_FS_XATTR=y
-CONFIG_UBIFS_FS_ADVANCED_COMPR=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V3_ACL=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/patches/at91bootstrap/0001-usb-a9g20-lpw.patch

@@ -1,610 +0,0 @@
-From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
-From: Gregory Hermant <gregory.hermant@calao-systems.com>
-Date: Fri, 6 Jul 2012 16:32:47 +0200
-Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
-
-
-Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
----
- board/usb_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++
- board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h |  112 +++++++++
- board/usb_a9g20_lpw/usb_a9g20_lpw.c           |  303 +++++++++++++++++++++++++
- crt0_gnu.S                                    |    7 +
- include/part.h                                |    6 +-
- 5 files changed, 548 insertions(+), 1 deletions(-)
- create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
- create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
- create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
-
-diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
-new file mode 100644
-index 0000000..8c9d99a
---- /dev/null
-+++ b/board/usb_a9g20_lpw/nandflash/Makefile
-@@ -0,0 +1,121 @@
-+# TODO: set this appropriately for your local toolchain
-+ifndef ERASE_FCT
-+ERASE_FCT=rm -f
-+endif
-+ifndef CROSS_COMPILE
-+CROSS_COMPILE=arm-elf-
-+endif
-+
-+TOOLCHAIN=gcc
-+
-+BOOTSTRAP_PATH=../../..
-+
-+# NandFlashBoot Configuration for USB-A9G20-LPW
-+
-+# Target name (case sensitive!!!)
-+TARGET=AT91SAM9G20
-+# Board name (case sensitive!!!)
-+BOARD=usb_a9g20_lpw
-+# Link Address and Top_of_Memory
-+LINK_ADDR=0x200000
-+TOP_OF_MEMORY=0x301000
-+# Name of current directory
-+PROJECT=nandflash
-+
-+ifndef BOOT_NAME
-+BOOT_NAME=$(PROJECT)_$(BOARD)
-+endif
-+
-+INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+
-+AS=$(CROSS_COMPILE)gcc
-+CC=$(CROSS_COMPILE)gcc
-+LD=$(CROSS_COMPILE)gcc
-+NM= $(CROSS_COMPILE)nm
-+SIZE=$(CROSS_COMPILE)size
-+OBJCOPY=$(CROSS_COMPILE)objcopy
-+OBJDUMP=$(CROSS_COMPILE)objdump
-+CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
-+ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
-+
-+# Linker flags.
-+#  -Wl,...:     tell GCC to pass this to linker.
-+#    -Map:      create map file
-+#    --cref:    add cross reference to map file
-+LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
-+LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
-+OBJS=crt0_gnu.o
-+
-+endif
-+
-+OBJS+=\
-+	$(BOARD).o \
-+	main.o \
-+	gpio.o \
-+	pmc.o \
-+	debug.o \
-+	sdramc.o \
-+	nandflash.o \
-+	_udivsi3.o \
-+	_umodsi3.o \
-+	div0.o \
-+	udiv.o \
-+	string.o
-+
-+rebuild: clean all
-+
-+all: 	$(BOOT_NAME)
-+
-+ifeq ($(TOOLCHAIN), gcc)
-+$(BOOT_NAME): $(OBJS)
-+	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
-+	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
-+endif
-+
-+
-+$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
-+
-+main.o: $(BOOTSTRAP_PATH)/main.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
-+
-+gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
-+
-+pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
-+
-+debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
-+
-+sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
-+
-+dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
-+
-+nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
-+
-+crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
-+
-+div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
-+
-+string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
-+
-+udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
-+	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
-+
-+_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
-+
-+_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
-+	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
-+
-+clean:
-+	$(ERASE_FCT) *.o *.bin *.elf *.map
-diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
-new file mode 100644
-index 0000000..c0bdc6e
---- /dev/null
-+++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
-@@ -0,0 +1,112 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2008, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb-a9g20-lpw.h
-+ * Object              :
-+ * Creation            : GH July 6th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#ifndef _USB_A9G20_LPW_H
-+#define _USB_A9G20_LPW_H
-+
-+/* ******************************************************************* */
-+/* PMC Settings                                                        */
-+/*                                                                     */
-+/* The main oscillator is enabled as soon as possible in the c_startup */
-+/* and MCK is switched on the main oscillator.                         */
-+/* PLL initialization is done later in the hw_init() function          */
-+/* ******************************************************************* */
-+#define MASTER_CLOCK		(133000000)
-+#define PLL_LOCK_TIMEOUT	1000000
-+
-+/* Set PLLA to 798Mhz */
-+#define PLLA_SETTINGS	0x20843F02
-+#define PLLB_SETTINGS	0x100F3F02
-+
-+/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
-+#define MCKR_SETTINGS		0x1300
-+#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
-+
-+/* ******************************************************************* */
-+/* NandFlash Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define AT91C_SMARTMEDIA_BASE	0x40000000
-+
-+#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
-+#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
-+
-+#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
-+#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
-+
-+#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
-+
-+
-+/* ******************************************************************** */
-+/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
-+/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
-+/* to generate these values. 						*/
-+/* ******************************************************************** */
-+#define AT91C_SM_NWE_SETUP	(2 << 0)
-+#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
-+#define AT91C_SM_NRD_SETUP	(2 << 16)
-+#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
-+  
-+#define AT91C_SM_NWE_PULSE 	(4 << 0)
-+#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
-+#define AT91C_SM_NRD_PULSE	(4 << 16)
-+#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
-+  
-+#define AT91C_SM_NWE_CYCLE 	(7 << 0)
-+#define AT91C_SM_NRD_CYCLE	(7 << 16)
-+
-+#define AT91C_SM_TDF	        (3 << 16)
-+
-+/* ******************************************************************* */
-+/* BootStrap Settings                                                  */
-+/*                                                                     */
-+/* ******************************************************************* */
-+#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
-+#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
-+
-+#define MACH_TYPE		0x731			/* USB-A9G20 */
-+#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
-+
-+/* ******************************************************************* */
-+/* Application Settings                                                */
-+/* ******************************************************************* */
-+#undef CFG_DEBUG
-+#undef CFG_DATAFLASH
-+
-+#define CFG_NANDFLASH
-+#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
-+#undef  CFG_NANDFLASH_RECOVERY
-+
-+#define	CFG_SDRAM
-+#define	CFG_HW_INIT
-+
-+#endif	/* _USB_A9G20_LPW_H */
-diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
-new file mode 100644
-index 0000000..c372307
---- /dev/null
-+++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
-@@ -0,0 +1,303 @@
-+/* ----------------------------------------------------------------------------
-+ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
-+ * ----------------------------------------------------------------------------
-+ * Copyright (c) 2008, Atmel Corporation
-+
-+ * All rights reserved.
-+ *
-+ * Redistribution and use in source and binary forms, with or without
-+ * modification, are permitted provided that the following conditions are met:
-+ *
-+ * - Redistributions of source code must retain the above copyright notice,
-+ * this list of conditions and the disclaimer below.
-+ *
-+ * Atmel's name may not be used to endorse or promote products derived from
-+ * this software without specific prior written permission.
-+ *
-+ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
-+ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
-+ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
-+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
-+ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
-+ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
-+ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
-+ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
-+ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ * ----------------------------------------------------------------------------
-+ * File Name           : usb_a9g20_lpw.c
-+ * Object              :
-+ * Creation            : GH July 6th 2012
-+ *-----------------------------------------------------------------------------
-+ */
-+#include "../../include/part.h"
-+#include "../../include/gpio.h"
-+#include "../../include/pmc.h"
-+#include "../../include/debug.h"
-+#include "../../include/sdramc.h"
-+#include "../../include/main.h"
-+#ifdef CFG_NANDFLASH
-+#include "../../include/nandflash.h"
-+#endif
-+#ifdef CFG_DATAFLASH
-+#include "../../include/dataflash.h"
-+#endif
-+
-+static inline unsigned int get_cp15(void)
-+{
-+	unsigned int value;
-+	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
-+	return value;
-+}
-+
-+static inline void set_cp15(unsigned int value)
-+{
-+	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
-+}
-+
-+#ifdef CFG_HW_INIT
-+/*----------------------------------------------------------------------------*/
-+/* \fn    hw_init							      */
-+/* \brief This function performs very low level HW initialization	      */
-+/* This function is invoked as soon as possible during the c_startup	      */
-+/* The bss segment must be initialized					      */
-+/*----------------------------------------------------------------------------*/
-+void hw_init(void)
-+{
-+	unsigned int cp15;
-+	
-+	/* Configure PIOs */
-+	const struct pio_desc hw_pio[] = {
-+#ifdef CFG_DEBUG
-+		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Disable watchdog */
-+	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
-+
-+	/* At this stage the main oscillator is supposed to be enabled
-+	 * PCK = MCK = MOSC */
-+	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
-+
-+	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
-+	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* PCK = PLLA/2 = 3 * MCK */
-+	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
-+	/* Switch MCK on PLLA output */
-+	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure PLLB */
-+	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
-+
-+	/* Configure CP15 */
-+	cp15 = get_cp15();
-+	cp15 |= I_CACHE;
-+	set_cp15(cp15);
-+
-+	/* Configure the PIO controller */
-+	pio_setup(hw_pio);
-+
-+	/* Configure the EBI Slave Slot Cycle to 64 */
-+	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
-+
-+#ifdef CFG_DEBUG
-+	/* Enable Debug messages on the DBGU */
-+	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
-+
-+	dbg_print("Start AT91Bootstrap...\n\r");
-+#endif /* CFG_DEBUG */
-+
-+#ifdef CFG_SDRAM
-+	/* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
-+	writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
-+
-+	/* Configure SDRAM Controller */
-+	sdram_init(	AT91C_SDRAMC_NC_9  |
-+				AT91C_SDRAMC_NR_13 |
-+				AT91C_SDRAMC_CAS_3 |
-+				AT91C_SDRAMC_NB_4_BANKS |
-+				AT91C_SDRAMC_DBW_32_BITS |
-+				AT91C_SDRAMC_TWR_3 |
-+				AT91C_SDRAMC_TRC_9 |
-+				AT91C_SDRAMC_TRP_3 |
-+				AT91C_SDRAMC_TRCD_3 |
-+				AT91C_SDRAMC_TRAS_6 |
-+				AT91C_SDRAMC_TXSR_10,		/* Control Register */
-+				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
-+                                AT91C_SDRAMC_MD_SDRAM);         /* SDRAM (no low power)   */
-+
-+#endif /* CFG_SDRAM */
-+}
-+#endif /* CFG_HW_INIT */
-+
-+#ifdef CFG_SDRAM
-+/*------------------------------------------------------------------------------*/
-+/* \fn    sdramc_hw_init							*/
-+/* \brief This function performs SDRAMC HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void sdramc_hw_init(void)
-+{
-+	/* Configure PIOs */
-+/*	const struct pio_desc sdramc_pio[] = {
-+		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+*/
-+	/* Configure the SDRAMC PIO controller to output PCK0 */
-+/*	pio_setup(sdramc_pio); */
-+
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
-+	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
-+
-+}
-+#endif /* CFG_SDRAM */
-+
-+#ifdef CFG_DATAFLASH
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_recovery								*/
-+/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+void df_recovery(AT91PS_DF pDf)
-+{
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb);
-+	
-+	/* If USR PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if ( !pio_get_value(AT91C_PIN_PB(10)) )
-+		df_page_erase(pDf, 0);
-+#endif
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    df_hw_init								*/
-+/* \brief This function performs DataFlash HW initialization			*/
-+/*------------------------------------------------------------------------------*/
-+void df_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc df_pio[] = {
-+		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
-+		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
-+#endif
-+#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
-+		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
-+#endif
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	pio_setup(df_pio);
-+}
-+#endif /* CFG_DATAFLASH */
-+
-+
-+
-+#ifdef CFG_NANDFLASH
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nand_recovery						*/
-+/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
-+/*        during boot sequence							*/
-+/*------------------------------------------------------------------------------*/
-+#ifdef CFG_NANDFLASH_RECOVERY
-+static void nand_recovery(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc usrpb[] = {
-+		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
-+		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(usrpb);
-+	
-+	/* If USER PB is pressed during Boot sequence */
-+	/* Erase NandFlash block 0*/
-+	if (!pio_get_value(AT91C_PIN_PB(10)) )
-+		AT91F_NandEraseBlock0();
-+}
-+#else
-+static void nand_recovery(void) {}
-+#endif
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_hw_init							*/
-+/* \brief NandFlash HW init							*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_hw_init(void)
-+{
-+	/* Configure PIOs */
-+	const struct pio_desc nand_pio[] = {
-+		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
-+		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
-+		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
-+	};
-+
-+	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
-+	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
-+		    
-+	/* Configure SMC CS3 */
-+ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
-+  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
-+	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
-+	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
-+  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
-+
-+	/* Configure the PIO controller */
-+	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
-+	pio_setup(nand_pio);
-+	
-+	nand_recovery();
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_16bits_dbw_init						*/
-+/* \brief Configure SMC in 16 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_16bits_dbw_init(void)
-+{
-+	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+/*------------------------------------------------------------------------------*/
-+/* \fn    nandflash_cfg_8bits_dbw_init						*/
-+/* \brief Configure SMC in 8 bits mode						*/
-+/*------------------------------------------------------------------------------*/
-+void nandflash_cfg_8bits_dbw_init(void)
-+{
-+	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
-+}
-+
-+#endif /* #ifdef CFG_NANDFLASH */
-diff --git a/crt0_gnu.S b/crt0_gnu.S
-index 042b617..002feef 100644
---- a/crt0_gnu.S
-+++ b/crt0_gnu.S
-@@ -106,6 +106,13 @@ _relocate_to_sram:
- #endif /* CFG_NORFLASH */
- 
- _setup_clocks:
-+/* Test if main osc is bypassed */
-+	ldr 	r0,=AT91C_PMC_MOR
-+	ldr 	r1, [r0]
-+	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
-+	ands 	r1, r1, r2
-+	bne	_init_data	/* branch if OSCBYPASS=1 */
-+
- /* Test if main oscillator is enabled */
- 	ldr 	r0,=AT91C_PMC_SR
- 	ldr 	r1, [r0]
-diff --git a/include/part.h b/include/part.h
-index ba5985a..1d7392a 100644
---- a/include/part.h
-+++ b/include/part.h
-@@ -46,7 +46,11 @@
- 
- #ifdef AT91SAM9G20
- #include "AT91SAM9260_inc.h"
--#include "at91sam9g20ek.h"
-+	#ifdef at91sam9g20ek
-+	#include "at91sam9g20ek.h"
-+	#elif usb_a9g20_lpw
-+	#include "usb-a9g20-lpw.h"
-+	#endif
- #endif
- 
- #ifdef AT91SAM9261
--- 
-1.5.6.3
-

board/calao/usb-a9g20-lpw/patches/barebox/0001-usb-a9g20-lpw.patch

@@ -1,12 +0,0 @@
-diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
-index 30bf380..7716e0e 100644
---- a/arch/arm/configs/usb_a9g20_defconfig
-+++ b/arch/arm/configs/usb_a9g20_defconfig
-@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
- CONFIG_CMDLINE_EDITING=y
- CONFIG_AUTO_COMPLETE=y
- CONFIG_MENU=y
-+# CONFIG_ERRNO_MESSAGES is not set
- # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
- CONFIG_CONSOLE_ACTIVATE_ALL=y
- CONFIG_PARTITION=y

board/congatec/qmx6/readme.txt

@@ -1,36 +0,0 @@
-This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
-
-conga-QMX6 is based on the freescale iMX6 SoC. For more information please
-have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
-
-The configuration is based on the currently latest kernel release from
-Congatec's git repository which is based on 3.0.35. The bootloader u-boot
-is preconfigured on the CPU module and does not need to be replaced.
-
-To build the default configuration you only have to:
-
-	make qmx6_defconfig && make
-
-You will need a microSD card of sufficient size and the first or only
-partition configured as Linux type.
-
-To transfer the system to the card do:
-
-	$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
-
-You can optionally extend the filesystem size to the whole partition:
-
-	$ sudo resize2fs /dev/sdX1
-
-You can also update the card image without completely rewriting it:
-
-	$ sudo mount /dev/sdX1 /mnt
-	$ sudo tar xf output/images/rootfs.tar -C /mnt
-	$ sudo umount /mnt
-
-Connect a terminal program to the rs232 connector marked "CONSOLE"
-with baudrate set to 115200, insert the microSD card into the socket
-on the CPU module and power the board to watch the system boot.
-
-Booting from the SD card slot on the base board is currently not
-supported.

board/freescale/imx31_3stack/linux.fragment

@@ -0,0 +1 @@
+# CONFIG_FB_MXS is not set

board/freescale/p2020ds/linux-3.12.config

@@ -1,374 +0,0 @@
-CONFIG_PPC_85xx=y
-CONFIG_PHYS_64BIT=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=8
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_IRQ_DOMAIN_DEBUG=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=16
-CONFIG_CGROUPS=y
-CONFIG_NAMESPACES=y
-CONFIG_EXPERT=y
-CONFIG_KALLSYMS_ALL=y
-# CONFIG_SLUB_DEBUG is not set
-# CONFIG_COMPAT_BRK is not set
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_MAC_PARTITION=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_POWERNV_MSI is not set
-CONFIG_MPC85xx_DS=y
-CONFIG_HIGHMEM=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_IRQ_ALL_CPUS=y
-CONFIG_FORCE_MAX_ZONEORDER=12
-# CONFIG_SUSPEND is not set
-CONFIG_PCI=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCI_MSI=y
-CONFIG_RAPIDIO=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_XFRM_USER=y
-CONFIG_NET_KEY=m
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_ADVANCED_ROUTER=y
-CONFIG_IP_MULTIPLE_TABLES=y
-CONFIG_IP_ROUTE_MULTIPATH=y
-CONFIG_IP_ROUTE_VERBOSE=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_IP_PNP_RARP=y
-CONFIG_NET_IPIP=y
-CONFIG_IP_MROUTE=y
-CONFIG_IP_PIMSM_V1=y
-CONFIG_IP_PIMSM_V2=y
-CONFIG_INET_ESP=m
-CONFIG_INET_XFRM_MODE_TRANSPORT=m
-CONFIG_INET_XFRM_MODE_TUNNEL=m
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-CONFIG_NETWORK_SECMARK=y
-CONFIG_NETFILTER=y
-CONFIG_NF_CONNTRACK=m
-CONFIG_NF_CONNTRACK_SECMARK=y
-CONFIG_NF_CONNTRACK_ZONES=y
-CONFIG_NF_CONNTRACK_EVENTS=y
-CONFIG_NF_CONNTRACK_TIMEOUT=y
-CONFIG_NF_CONNTRACK_TIMESTAMP=y
-CONFIG_NF_CT_PROTO_DCCP=m
-CONFIG_NF_CT_PROTO_UDPLITE=m
-CONFIG_NF_CONNTRACK_AMANDA=m
-CONFIG_NF_CONNTRACK_FTP=m
-CONFIG_NF_CONNTRACK_H323=m
-CONFIG_NF_CONNTRACK_IRC=m
-CONFIG_NF_CONNTRACK_NETBIOS_NS=m
-CONFIG_NF_CONNTRACK_SNMP=m
-CONFIG_NF_CONNTRACK_PPTP=m
-CONFIG_NF_CONNTRACK_SANE=m
-CONFIG_NF_CONNTRACK_SIP=m
-CONFIG_NF_CONNTRACK_TFTP=m
-CONFIG_NF_CT_NETLINK=m
-CONFIG_NF_CT_NETLINK_TIMEOUT=m
-CONFIG_NF_CT_NETLINK_HELPER=m
-CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
-CONFIG_NETFILTER_XT_TARGET_AUDIT=m
-CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
-CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
-CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
-CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
-CONFIG_NETFILTER_XT_TARGET_DSCP=m
-CONFIG_NETFILTER_XT_TARGET_HMARK=m
-CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
-CONFIG_NETFILTER_XT_TARGET_LED=m
-CONFIG_NETFILTER_XT_TARGET_LOG=m
-CONFIG_NETFILTER_XT_TARGET_MARK=m
-CONFIG_NETFILTER_XT_TARGET_NFLOG=m
-CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
-CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
-CONFIG_NETFILTER_XT_TARGET_TEE=m
-CONFIG_NETFILTER_XT_TARGET_TPROXY=m
-CONFIG_NETFILTER_XT_TARGET_TRACE=m
-CONFIG_NETFILTER_XT_TARGET_SECMARK=m
-CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
-CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
-CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
-CONFIG_NETFILTER_XT_MATCH_BPF=m
-CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
-CONFIG_NETFILTER_XT_MATCH_COMMENT=m
-CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
-CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
-CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
-CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
-CONFIG_NETFILTER_XT_MATCH_CPU=m
-CONFIG_NETFILTER_XT_MATCH_DCCP=m
-CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
-CONFIG_NETFILTER_XT_MATCH_DSCP=m
-CONFIG_NETFILTER_XT_MATCH_ESP=m
-CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
-CONFIG_NETFILTER_XT_MATCH_HELPER=m
-CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
-CONFIG_NETFILTER_XT_MATCH_LENGTH=m
-CONFIG_NETFILTER_XT_MATCH_LIMIT=m
-CONFIG_NETFILTER_XT_MATCH_MAC=m
-CONFIG_NETFILTER_XT_MATCH_MARK=m
-CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
-CONFIG_NETFILTER_XT_MATCH_NFACCT=m
-CONFIG_NETFILTER_XT_MATCH_OSF=m
-CONFIG_NETFILTER_XT_MATCH_OWNER=m
-CONFIG_NETFILTER_XT_MATCH_POLICY=m
-CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
-CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
-CONFIG_NETFILTER_XT_MATCH_QUOTA=m
-CONFIG_NETFILTER_XT_MATCH_RATEEST=m
-CONFIG_NETFILTER_XT_MATCH_REALM=m
-CONFIG_NETFILTER_XT_MATCH_RECENT=m
-CONFIG_NETFILTER_XT_MATCH_SOCKET=m
-CONFIG_NETFILTER_XT_MATCH_STATE=m
-CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
-CONFIG_NETFILTER_XT_MATCH_STRING=m
-CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
-CONFIG_NETFILTER_XT_MATCH_TIME=m
-CONFIG_NETFILTER_XT_MATCH_U32=m
-CONFIG_NF_CONNTRACK_IPV4=m
-CONFIG_IP_NF_IPTABLES=m
-CONFIG_IP_NF_MATCH_AH=m
-CONFIG_IP_NF_MATCH_ECN=m
-CONFIG_IP_NF_MATCH_RPFILTER=m
-CONFIG_IP_NF_MATCH_TTL=m
-CONFIG_IP_NF_FILTER=m
-CONFIG_IP_NF_TARGET_REJECT=m
-CONFIG_IP_NF_TARGET_SYNPROXY=m
-CONFIG_IP_NF_TARGET_ULOG=m
-CONFIG_NF_NAT_IPV4=m
-CONFIG_IP_NF_TARGET_MASQUERADE=m
-CONFIG_IP_NF_TARGET_NETMAP=m
-CONFIG_IP_NF_TARGET_REDIRECT=m
-CONFIG_IP_NF_MANGLE=m
-CONFIG_IP_NF_TARGET_CLUSTERIP=m
-CONFIG_IP_NF_TARGET_ECN=m
-CONFIG_IP_NF_TARGET_TTL=m
-CONFIG_IP_NF_RAW=m
-CONFIG_IP_NF_ARPTABLES=m
-CONFIG_IP_NF_ARPFILTER=m
-CONFIG_IP_NF_ARP_MANGLE=m
-CONFIG_NF_CONNTRACK_IPV6=m
-CONFIG_IP6_NF_IPTABLES=m
-CONFIG_IP6_NF_MATCH_AH=m
-CONFIG_IP6_NF_MATCH_EUI64=m
-CONFIG_IP6_NF_MATCH_FRAG=m
-CONFIG_IP6_NF_MATCH_OPTS=m
-CONFIG_IP6_NF_MATCH_HL=m
-CONFIG_IP6_NF_MATCH_IPV6HEADER=m
-CONFIG_IP6_NF_MATCH_MH=m
-CONFIG_IP6_NF_MATCH_RPFILTER=m
-CONFIG_IP6_NF_MATCH_RT=m
-CONFIG_IP6_NF_TARGET_HL=m
-CONFIG_IP6_NF_FILTER=m
-CONFIG_IP6_NF_TARGET_REJECT=m
-CONFIG_IP6_NF_TARGET_SYNPROXY=m
-CONFIG_IP6_NF_MANGLE=m
-CONFIG_IP6_NF_RAW=m
-CONFIG_NF_NAT_IPV6=m
-CONFIG_IP6_NF_TARGET_MASQUERADE=m
-CONFIG_IP6_NF_TARGET_NPT=m
-CONFIG_IP_SCTP=m
-CONFIG_BRIDGE=m
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-# CONFIG_FW_LOADER_USER_HELPER is not set
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_FTL=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_CFI_AMDSTD=y
-CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_MTD_UBI=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_NBD=y
-CONFIG_EEPROM_LEGACY=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_FSL=y
-CONFIG_SATA_SIL24=y
-CONFIG_PATA_ALI=y
-CONFIG_MD=y
-CONFIG_BLK_DEV_MD=y
-CONFIG_MD_LINEAR=y
-CONFIG_MD_RAID0=y
-CONFIG_MD_RAID1=y
-CONFIG_MD_RAID10=y
-CONFIG_MD_RAID456=y
-CONFIG_MD_MULTIPATH=y
-CONFIG_BCACHE=y
-CONFIG_BLK_DEV_DM=m
-CONFIG_DM_CRYPT=m
-CONFIG_DM_SNAPSHOT=m
-CONFIG_DM_THIN_PROVISIONING=m
-CONFIG_DM_CACHE=m
-CONFIG_DM_MIRROR=m
-CONFIG_DM_RAID=m
-CONFIG_DM_ZERO=m
-CONFIG_DM_MULTIPATH=m
-CONFIG_NETDEVICES=y
-CONFIG_DUMMY=y
-CONFIG_TUN=y
-CONFIG_NET_TULIP=y
-CONFIG_GIANFAR=y
-CONFIG_E1000E=y
-CONFIG_AT803X_PHY=y
-CONFIG_ATHEROS_PHY=y
-CONFIG_MARVELL_PHY=y
-CONFIG_DAVICOM_PHY=y
-CONFIG_CICADA_PHY=y
-CONFIG_VITESSE_PHY=y
-CONFIG_DP8384x_PHY=y
-CONFIG_FIXED_PHY=y
-CONFIG_PPP=m
-CONFIG_PPP_BSDCOMP=m
-CONFIG_PPP_DEFLATE=m
-CONFIG_PPP_FILTER=y
-CONFIG_PPP_MPPE=m
-CONFIG_PPP_MULTILINK=y
-CONFIG_PPPOE=m
-CONFIG_PPP_ASYNC=m
-CONFIG_PPP_SYNC_TTY=m
-CONFIG_ATH_CARDS=m
-CONFIG_ATH9K=m
-CONFIG_ATH9K_HTC=m
-CONFIG_RT2X00=m
-CONFIG_RT2800PCI=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RT2800USB_RT3573=y
-CONFIG_RT2800USB_RT53XX=y
-CONFIG_RT2800USB_RT55XX=y
-# CONFIG_RTL_CARDS is not set
-# CONFIG_INPUT_MOUSEDEV is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=2
-CONFIG_SERIAL_8250_RUNTIME_UARTS=2
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_NVRAM=y
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_MPC=y
-CONFIG_SPI=y
-CONFIG_SPI_FSL_SPI=y
-CONFIG_SPI_FSL_ESPI=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_MPC8XXX=y
-# CONFIG_HWMON is not set
-# CONFIG_VGA_ARB is not set
-# CONFIG_VGA_CONSOLE is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_HRTIMER=m
-# CONFIG_SND_SUPPORT_OLD_API is not set
-# CONFIG_SND_DRIVERS is not set
-CONFIG_SND_INTEL8X0=m
-# CONFIG_SND_PPC is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-# CONFIG_HID_GENERIC is not set
-# CONFIG_USB_HID is not set
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_FSL=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
-CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_OF_ESDHC=y
-CONFIG_EDAC=y
-CONFIG_EDAC_MM_EDAC=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_CMOS=y
-CONFIG_DMADEVICES=y
-CONFIG_FSL_DMA=y
-CONFIG_EXT4_FS=y
-CONFIG_EXT4_FS_POSIX_ACL=y
-CONFIG_EXT4_FS_SECURITY=y
-CONFIG_FANOTIFY=y
-CONFIG_FUSE_FS=m
-CONFIG_VFAT_FS=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_UBIFS_FS=y
-CONFIG_SQUASHFS=y
-CONFIG_SQUASHFS_XATTR=y
-CONFIG_SQUASHFS_LZO=y
-CONFIG_SQUASHFS_XZ=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NFSD=m
-CONFIG_CIFS=m
-CONFIG_CIFS_XATTR=y
-CONFIG_CIFS_POSIX=y
-# CONFIG_CIFS_DEBUG is not set
-CONFIG_CIFS_SMB2=y
-CONFIG_CIFS_FSCACHE=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_UTF8=m
-CONFIG_CRC_T10DIF=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-CONFIG_CRYPTO_HMAC=y
-CONFIG_CRYPTO_MD5=y
-CONFIG_CRYPTO_SHA1=y
-CONFIG_CRYPTO_SHA256=y
-CONFIG_CRYPTO_SHA512=y
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_TALITOS=y

board/freescale/p2020ds/linux-fix-c6187597-breakage.patch

@@ -1,51 +0,0 @@
-From: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
-Subject: [PATCH] usb: pci-quirks: do not access OHCI_FMINTERVAL register on ULI hw
-
-This access causes hang on Freescale P2020DS board (that has OHCI
-provided by ULI 1533 chip).
-
-Since preserving OHCI_FMINTERVAL was originally done only for NVIDIA
-hardware and only later (in c6187597) was turned unconditional, and
-c6187597 commit message again mentions only NVIDIA, I think it should be
-safe to disable preserving OHCI_FMINTERVAL if device vendor is ULI.
-
-Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
----
- drivers/usb/host/pci-quirks.c |    8 +++++---
- 1 file changed, 5 insertions(+), 3 deletions(-)
-
-diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
-index 00661d3..5acbd5b 100644
---- a/drivers/usb/host/pci-quirks.c
-+++ b/drivers/usb/host/pci-quirks.c
-@@ -571,7 +571,7 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
- {
- 	void __iomem *base;
- 	u32 control;
--	u32 fminterval;
-+	u32 uninitialized_var(fminterval);
- 	int cnt;
- 
- 	if (!mmio_resource_enabled(pdev, 0))
-@@ -619,7 +619,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
- 	}
- 
- 	/* software reset of the controller, preserving HcFmInterval */
--	fminterval = readl(base + OHCI_FMINTERVAL);
-+	if (pdev->vendor != PCI_VENDOR_ID_AL)
-+		fminterval = readl(base + OHCI_FMINTERVAL);
- 	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
- 
- 	/* reset requires max 10 us delay */
-@@ -628,7 +629,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
- 			break;
- 		udelay(1);
- 	}
--	writel(fminterval, base + OHCI_FMINTERVAL);
-+	if (pdev->vendor != PCI_VENDOR_ID_AL)
-+		writel(fminterval, base + OHCI_FMINTERVAL);
- 
- 	/* Now the controller is safely in SUSPEND and nothing can wake it up */
- 	iounmap(base);
--- 
-1.7.10.4

board/freescale/p2020ds/readme.txt

@@ -1,40 +0,0 @@
-You'll need to program the files created by buildroot into the flash.
-The fast way is to tftp transfer the files via one of the network interfaces.
-
-Alternatively you can transfer the files via serial console with an Ymodem
-file transfer from your terminal program by using a "loady" command
-from the u-boot prompt instead of the "tftp ..." commands stated below.
-Beware that serial console file transfers are quite slow!
-
-1. Program the DTB to NOR flash
-
-   => tftp ${loadaddr} p2020ds.dtb
-   => erase 0xeff00000 0xeff7ffff
-   => cp.b ${loadaddr} 0xeff00000 ${filesize}
-
-2. Program the kernel to NOR flash
-
-   => tftp ${loadaddr} uImage
-   => erase 0xec000000 0xec3fffff
-   => cp.b ${loadaddr} 0xec000000 ${filesize}
-
-3. Program the root filesystem to NOR flash
-
-   => tftp ${loadaddr} rootfs.jffs2
-   => erase 0xec400000 0xeeffffff
-   => cp.b ${loadaddr} 0xec400000 ${filesize}
-
-4. Booting your new system
-
-   => setenv jffs2boot 'setenv bootargs root=/dev/mtdblock4 rootfstype=jffs2 rw console=ttyS0,115200;bootm ec000000 - eff00000'
-
-   If you want to set this boot option as default:
-
-   => setenv bootcmd 'run jffs2boot'
-   => saveenv
-
-   ...or for a single boot:
-
-   => run jffs2boot
-
-   You can login with user "root".

board/qemu/ppc-g3beige/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

board/roseapplepi/patches/linux/0002-kernel-add-support-for-gcc-5.patch

@@ -0,0 +1,99 @@
+From 96b4fb75d15be65edc5494579e4a944534042f99 Mon Sep 17 00:00:00 2001
+From: Sasha Levin <sasha.levin@oracle.com>
+Date: Mon, 13 Oct 2014 15:51:05 -0700
+Subject: [PATCH] kernel: add support for gcc 5
+
+We're missing include/linux/compiler-gcc5.h which is required now
+because gcc branched off to v5 in trunk.
+
+Just copy the relevant bits out of include/linux/compiler-gcc4.h,
+no new code is added as of now.
+
+This fixes a build error when using gcc 5.
+
+Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
+Cc: <stable@vger.kernel.org>
+Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
+Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
+(cherry picked from commit 71458cfc782eafe4b27656e078d379a34e472adf)
+Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
+---
+ include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
+ 1 file changed, 66 insertions(+)
+ create mode 100644 include/linux/compiler-gcc5.h
+
+diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
+new file mode 100644
+index 0000000..cdd1cc2
+--- /dev/null
++++ b/include/linux/compiler-gcc5.h
+@@ -0,0 +1,66 @@
++#ifndef __LINUX_COMPILER_H
++#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
++#endif
++
++#define __used				__attribute__((__used__))
++#define __must_check			__attribute__((warn_unused_result))
++#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
++
++/* Mark functions as cold. gcc will assume any path leading to a call
++   to them will be unlikely.  This means a lot of manual unlikely()s
++   are unnecessary now for any paths leading to the usual suspects
++   like BUG(), printk(), panic() etc. [but let's keep them for now for
++   older compilers]
++
++   Early snapshots of gcc 4.3 don't support this and we can't detect this
++   in the preprocessor, but we can live with this because they're unreleased.
++   Maketime probing would be overkill here.
++
++   gcc also has a __attribute__((__hot__)) to move hot functions into
++   a special section, but I don't see any sense in this right now in
++   the kernel context */
++#define __cold			__attribute__((__cold__))
++
++#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
++
++#ifndef __CHECKER__
++# define __compiletime_warning(message) __attribute__((warning(message)))
++# define __compiletime_error(message) __attribute__((error(message)))
++#endif /* __CHECKER__ */
++
++/*
++ * Mark a position in code as unreachable.  This can be used to
++ * suppress control flow warnings after asm blocks that transfer
++ * control elsewhere.
++ *
++ * Early snapshots of gcc 4.5 don't support this and we can't detect
++ * this in the preprocessor, but we can live with this because they're
++ * unreleased.  Really, we need to have autoconf for the kernel.
++ */
++#define unreachable() __builtin_unreachable()
++
++/* Mark a function definition as prohibited from being cloned. */
++#define __noclone	__attribute__((__noclone__))
++
++/*
++ * Tell the optimizer that something else uses this function or variable.
++ */
++#define __visible __attribute__((externally_visible))
++
++/*
++ * GCC 'asm goto' miscompiles certain code sequences:
++ *
++ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
++ *
++ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
++ * Fixed in GCC 4.8.2 and later versions.
++ *
++ * (asm goto is automatically volatile - the naming reflects this.)
++ */
++#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
++
++#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
++#define __HAVE_BUILTIN_BSWAP32__
++#define __HAVE_BUILTIN_BSWAP64__
++#define __HAVE_BUILTIN_BSWAP16__
++#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
+-- 
+2.10.2
+

board/roseapplepi/patches/linux/0003-ARM-8158-1-LLVMLinux-use-static-inline-in-ARM-ftrace.patch

@@ -0,0 +1,54 @@
+From 8ac9a3f6dbf00d861134bea3f2c930defed6311a Mon Sep 17 00:00:00 2001
+From: Behan Webster <behanw@converseincode.com>
+Date: Wed, 24 Sep 2014 01:06:46 +0100
+Subject: [PATCH] ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
+
+With compilers which follow the C99 standard (like modern versions of gcc and
+clang), "extern inline" does the wrong thing (emits code for an externally
+linkable version of the inline function). In this case using static inline
+and removing the NULL version of return_address in return_address.c does
+the right thing.
+
+Signed-off-by: Behan Webster <behanw@converseincode.com>
+Reviewed-by: Mark Charlebois <charlebm@gmail.com>
+Acked-by: Steven Rostedt <rostedt@goodmis.org>
+Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
+(cherry picked from commit aeea3592a13bf12861943e44fc48f1f270941f8d)
+Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
+---
+ arch/arm/include/asm/ftrace.h    | 2 +-
+ arch/arm/kernel/return_address.c | 5 -----
+ 2 files changed, 1 insertion(+), 6 deletions(-)
+
+diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
+index f89515a..2bb8cac 100644
+--- a/arch/arm/include/asm/ftrace.h
++++ b/arch/arm/include/asm/ftrace.h
+@@ -45,7 +45,7 @@ void *return_address(unsigned int);
+ 
+ #else
+ 
+-extern inline void *return_address(unsigned int level)
++static inline void *return_address(unsigned int level)
+ {
+ 	return NULL;
+ }
+diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
+index 2f8f523..a3b587f 100755
+--- a/arch/arm/kernel/return_address.c
++++ b/arch/arm/kernel/return_address.c
+@@ -63,11 +63,6 @@ void *return_address(unsigned int level)
+ //#warning "TODO: return_address should use unwind tables"
+ //#endif
+ 
+-void *return_address(unsigned int level)
+-{
+-	return NULL;
+-}
+-
+ #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
+ 
+ EXPORT_SYMBOL_GPL(return_address);
+-- 
+2.10.2
+

board/roseapplepi/patches/linux/0004-Fix-compile-errors-with-gcc5.patch

@@ -0,0 +1,121 @@
+From ef34609395c72a1e777ef9c3fb6ce60aa92976bb Mon Sep 17 00:00:00 2001
+From: Marco Franceschetti <vonfritz1@gmail.com>
+Date: Sun, 13 Mar 2016 09:44:54 +0100
+Subject: [PATCH] Fix compile errors with gcc5
+
+(cherry picked from commit e824d45043efd49607f66c89c921b07c1523bf9e)
+Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
+---
+ drivers/net/wireless/actions/rtl8188etv/include/ieee80211.h    | 6 +++---
+ drivers/net/wireless/actions/rtl8723bs/include/ieee80211.h     | 6 +++---
+ drivers/net/wireless/actions/rtl8723bs_vq0/include/ieee80211.h | 6 +++---
+ drivers/net/wireless/actions/rtl8723bu/include/ieee80211.h     | 6 +++---
+ 4 files changed, 12 insertions(+), 12 deletions(-)
+
+diff --git a/drivers/net/wireless/actions/rtl8188etv/include/ieee80211.h b/drivers/net/wireless/actions/rtl8188etv/include/ieee80211.h
+index fc293c4..0898cd4 100755
+--- a/drivers/net/wireless/actions/rtl8188etv/include/ieee80211.h
++++ b/drivers/net/wireless/actions/rtl8188etv/include/ieee80211.h
+@@ -1314,18 +1314,18 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+ }
+ 
+-extern __inline int is_zero_mac_addr(const u8 *addr)
++static __inline int is_zero_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) &&   \
+ 		(addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));
+diff --git a/drivers/net/wireless/actions/rtl8723bs/include/ieee80211.h b/drivers/net/wireless/actions/rtl8723bs/include/ieee80211.h
+index 09475ef..56e0f5a 100755
+--- a/drivers/net/wireless/actions/rtl8723bs/include/ieee80211.h
++++ b/drivers/net/wireless/actions/rtl8723bs/include/ieee80211.h
+@@ -1318,18 +1318,18 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+ }
+ 
+-extern __inline int is_zero_mac_addr(const u8 *addr)
++static __inline int is_zero_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) &&   \
+ 		(addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));
+diff --git a/drivers/net/wireless/actions/rtl8723bs_vq0/include/ieee80211.h b/drivers/net/wireless/actions/rtl8723bs_vq0/include/ieee80211.h
+index 5dfc421..95144b6 100755
+--- a/drivers/net/wireless/actions/rtl8723bs_vq0/include/ieee80211.h
++++ b/drivers/net/wireless/actions/rtl8723bs_vq0/include/ieee80211.h
+@@ -1314,18 +1314,18 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+ }
+ 
+-extern __inline int is_zero_mac_addr(const u8 *addr)
++static __inline int is_zero_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) &&   \
+ 		(addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));
+diff --git a/drivers/net/wireless/actions/rtl8723bu/include/ieee80211.h b/drivers/net/wireless/actions/rtl8723bu/include/ieee80211.h
+index 09475ef..56e0f5a 100755
+--- a/drivers/net/wireless/actions/rtl8723bu/include/ieee80211.h
++++ b/drivers/net/wireless/actions/rtl8723bu/include/ieee80211.h
+@@ -1318,18 +1318,18 @@ enum ieee80211_state {
+ (((Addr[2]) & 0xff) == 0xff) && (((Addr[3]) & 0xff) == 0xff) && (((Addr[4]) & 0xff) == 0xff) && \
+ (((Addr[5]) & 0xff) == 0xff))
+ #else
+-extern __inline int is_multicast_mac_addr(const u8 *addr)
++static __inline int is_multicast_mac_addr(const u8 *addr)
+ {
+         return ((addr[0] != 0xff) && (0x01 & addr[0]));
+ }
+ 
+-extern __inline int is_broadcast_mac_addr(const u8 *addr)
++static __inline int is_broadcast_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0xff) && (addr[1] == 0xff) && (addr[2] == 0xff) &&   \
+ 		(addr[3] == 0xff) && (addr[4] == 0xff) && (addr[5] == 0xff));
+ }
+ 
+-extern __inline int is_zero_mac_addr(const u8 *addr)
++static __inline int is_zero_mac_addr(const u8 *addr)
+ {
+ 	return ((addr[0] == 0x00) && (addr[1] == 0x00) && (addr[2] == 0x00) &&   \
+ 		(addr[3] == 0x00) && (addr[4] == 0x00) && (addr[5] == 0x00));
+-- 
+2.10.2
+

boot/boot-wrapper-aarch64/Config.in

@@ -11,7 +11,7 @@ config BR2_TARGET_BOOT_WRAPPER_AARCH64
 	  possible to start an Aarch64 kernel inside the available
 	  software simulators for the Aarch64 architecture.
 
-	  git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64.git
+	  git://git.kernel.org/pub/scm/linux/kernel/git/mark/boot-wrapper-aarch64.git
 
 if BR2_TARGET_BOOT_WRAPPER_AARCH64
 

boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk

@@ -5,7 +5,7 @@
 ################################################################################
 
 BOOT_WRAPPER_AARCH64_VERSION = 4266507a84f8c06452109d38e0350d4759740694
-BOOT_WRAPPER_AARCH64_SITE = git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64.git
+BOOT_WRAPPER_AARCH64_SITE = git://git.kernel.org/pub/scm/linux/kernel/git/mark/boot-wrapper-aarch64.git
 BOOT_WRAPPER_AARCH64_LICENSE = BSD3c
 BOOT_WRAPPER_AARCH64_LICENSE_FILES = LICENSE.txt
 BOOT_WRAPPER_AARCH64_DEPENDENCIES = linux

configs/armadeus_apf28_defconfig

@@ -13,7 +13,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.22"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.30"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf28/linux-4.4.config"
 BR2_LINUX_KERNEL_UIMAGE=y

configs/armadeus_apf51_defconfig

@@ -3,7 +3,7 @@ BR2_arm=y
 BR2_cortex_a8=y
 
 # Linux headers same as kernel, a 3.12 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_12=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
 
 # System
 BR2_TARGET_GENERIC_HOSTNAME="apf51"
@@ -13,9 +13,9 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttymxc2"
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.12.6"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.4.30"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf51/linux-3.12.config"
+BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/armadeus/apf51/linux-4.4.config"
 BR2_LINUX_KERNEL_UIMAGE=y
 BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x90008000"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/at91sam9260eknf_defconfig

@@ -2,26 +2,32 @@
 BR2_arm=y
 BR2_arm926t=y
 
-# Linux headers same as kernel, a 3.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_9=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
-# Packages
-BR2_PACKAGE_HOST_SAM_BA=y
+# Kernel
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
+BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9260ek"
 
 # Filesystem
 BR2_TARGET_ROOTFS_UBIFS=y
 BR2_TARGET_ROOTFS_UBI=y
 
 # Bootloaders
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9260ek"
-BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="at91sam9260ek"
+BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
+BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9260eknf_uboot"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9260ek_nandflash"
 
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.1"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/atmel/at91sam9260ek/linux-3.9.config"
+# Host packages
+BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9g20dfc_defconfig

@@ -2,28 +2,31 @@
 BR2_arm=y
 BR2_arm926t=y
 
-# Linux headers same as kernel, a 3.1 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_1=y
-
-# Host utilities
-#
-BR2_PACKAGE_HOST_SAM_BA=y
-
-# First stage bootloader
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_BOARD="at91sam9g20ek"
-BR2_TARGET_AT91BOOTSTRAP_DATAFLASHCARD=y
-
-# Second stage bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="at91sam9g20ek_nandflash"
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.1.6"
-BR2_LINUX_KERNEL_USE_DEFCONFIG=y
-BR2_LINUX_KERNEL_DEFCONFIG="at91sam9g20ek"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
+BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9g20ek"
 
 # Filesystem
 BR2_TARGET_ROOTFS_TAR=y
+
+# Bootloaders
+BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
+BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9g20eknf_uboot"
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9g20ek_nandflash"
+
+# Host packages
+BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9g45m10ek_defconfig

@@ -1,22 +1,34 @@
+# Architecture
 BR2_arm=y
 BR2_arm926t=y
-# Linux headers same as kernel, a 3.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
+
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+
+# Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="03329ca4cf6b94acc5c65b59b2d1f90fdeee0887"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9m10g45ek"
+
+# Filesystem
 BR2_TARGET_ROOTFS_UBIFS=y
 BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_ROOTFS_UBI=y
+
+# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9m10g45eknf_uboot"
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="at91sam9m10g45ek_nandflash"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="677f3c2340b72131beebace8e96cac17b9569887"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9m10g45ek_nandflash"
+
+# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/at91sam9rlek_defconfig

@@ -1,22 +1,34 @@
+# Architecture
 BR2_arm=y
 BR2_arm926t=y
-# Linux headers same as kernel, a 3.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
+
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
+
+# Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="03329ca4cf6b94acc5c65b59b2d1f90fdeee0887"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="at91_dt"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91sam9rlek"
+
+# Filesystem
 BR2_TARGET_ROOTFS_UBIFS=y
 BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2047
 BR2_TARGET_ROOTFS_UBI=y
+
+# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="at91sam9rleknf_uboot"
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="at91sam9rlek_nandflash"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="677f3c2340b72131beebace8e96cac17b9569887"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION=y
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="at91sam9rlek_nandflash"
+
+# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/atmel_sama5d3xek_defconfig

@@ -1,26 +1,40 @@
+# Architecture
 BR2_arm=y
 BR2_cortex_a5=y
 BR2_ARM_ENABLE_VFP=y
 BR2_ARM_INSTRUCTIONS_THUMB2=y
-# Linux headers same as kernel, a 3.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
+
+# Toolchain
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_4=y
+
+# Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_GIT=y
 BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="03329ca4cf6b94acc5c65b59b2d1f90fdeee0887"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux4sam_5.5"
 BR2_LINUX_KERNEL_DEFCONFIG="sama5"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="sama5d31ek sama5d31ek_pda4 sama5d31ek_pda7 sama5d31ek_revc sama5d31ek_revc_pda4 sama5d31ek_revc_pda7 sama5d33ek sama5d33ek_pda4 sama5d33ek_pda7 sama5d33ek_revc sama5d33ek_revc_pda4 sama5d33ek_revc_pda7 sama5d34ek sama5d34ek_pda4 sama5d34ek_pda7 sama5d34ek_revc sama5d34ek_revc_pda4 sama5d34ek_revc_pda7 sama5d35ek sama5d35ek_revc sama5d36ek sama5d36ek_pda4 sama5d36ek_pda7 sama5d36ek_revc sama5d36ek_revc_pda4 sama5d36ek_revc_pda7"
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="sama5d31ek sama5d33ek sama5d34ek sama5d35ek sama5d36ek"
+
+# Filesystem
 BR2_TARGET_ROOTFS_UBIFS=y
 BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x1f000
 BR2_TARGET_ROOTFS_UBI=y
 BR2_TARGET_ROOTFS_UBI_SUBSIZE=2048
+
+# Bootloaders
 BR2_TARGET_AT91BOOTSTRAP3=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT=y
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL="https://github.com/linux4sam/at91bootstrap.git"
+BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION="v3.8.7"
 BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d3xeknf_uboot"
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="sama5d3xek_nandflash"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_GIT=y
 BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="677f3c2340b72131beebace8e96cac17b9569887"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="linux4sam_5.5"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="sama5d3xek_nandflash"
 BR2_TARGET_UBOOT_SPL=y
+
+# Host packages
 BR2_PACKAGE_HOST_SAM_BA=y

configs/atmel_sama5d4ek_defconfig

@@ -1,30 +0,0 @@
-BR2_arm=y
-BR2_cortex_a5=y
-BR2_ARM_ENABLE_NEON=y
-BR2_ARM_ENABLE_VFP=y
-BR2_ARM_INSTRUCTIONS_THUMB2=y
-# Linux headers same as kernel, a 3.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/linux4sam/linux-at91.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="03329ca4cf6b94acc5c65b59b2d1f90fdeee0887"
-BR2_LINUX_KERNEL_DEFCONFIG="sama5"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="at91-sama5d4ek"
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_ROOTFS_UBIFS_LEBSIZE=0x3e000
-BR2_TARGET_ROOTFS_UBIFS_MINIOSIZE=0x1000
-BR2_TARGET_ROOTFS_UBIFS_MAXLEBCNT=2082
-BR2_TARGET_ROOTFS_UBI=y
-BR2_TARGET_ROOTFS_UBI_PEBSIZE=0x40000
-BR2_TARGET_ROOTFS_UBI_SUBSIZE=0
-BR2_TARGET_AT91BOOTSTRAP3=y
-BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG="sama5d4eknf_uboot_secure"
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="sama5d4ek_nandflash"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://github.com/linux4sam/u-boot-at91.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="677f3c2340b72131beebace8e96cac17b9569887"
-BR2_TARGET_UBOOT_SPL=y
-BR2_PACKAGE_HOST_SAM_BA=y

configs/calao_qil_a9260_defconfig

@@ -1,20 +0,0 @@
-BR2_arm=y
-BR2_arm926t=y
-BR2_GLOBAL_PATCH_DIR="board/calao/qil-a9260/patches"
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS1"
-# Linux headers same as kernel, a 3.4 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_4=y
-BR2_PACKAGE_HOST_SAM_BA=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_BOARD="qil_a9260"
-BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION=y
-BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE="2012.08.0"
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="qil_a9260"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.4.7"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/qil-a9260/linux-3.4.7.config"

configs/calao_tny_a9g20_lpw_defconfig

@@ -1,29 +0,0 @@
-# architecture
-BR2_arm=y
-BR2_arm926t=y
-
-# system
-BR2_PACKAGE_HOST_SAM_BA=y
-
-# filesystem
-BR2_TARGET_ROOTFS_UBIFS=y
-
-# Linux headers same as kernel, a 3.9 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_9=y
-
-# bootloaders
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR="board/calao/tny-a9g20-lpw"
-BR2_TARGET_AT91BOOTSTRAP_BOARD="tny_a9g20_lpw"
-BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="tny_a9g20"
-
-# linux
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.9.4"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/tny-a9g20-lpw/linux-3.9.config"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="tny_a9g20"

configs/calao_usb_a9260_defconfig

@@ -1,18 +0,0 @@
-BR2_arm=y
-BR2_arm926t=y
-# Linux headers same as kernel, a 3.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
-BR2_PACKAGE_MTD=y
-BR2_PACKAGE_HOST_SAM_BA=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR="board/calao/usb-a9260"
-BR2_TARGET_AT91BOOTSTRAP_BOARD="usb_a9260"
-BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9260"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.10"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9260/linux-3.7.4.config"

configs/calao_usb_a9263_defconfig

@@ -1,17 +0,0 @@
-BR2_arm=y
-BR2_arm926t=y
-# Linux headers same as kernel, a 3.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
-BR2_PACKAGE_HOST_SAM_BA=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR="board/calao/usb-a9263"
-BR2_TARGET_AT91BOOTSTRAP_BOARD="usb_a9263"
-BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9263"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.10"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9263/linux-3.4.4.config"

configs/calao_usb_a9g20_lpw_defconfig

@@ -1,17 +0,0 @@
-BR2_arm=y
-BR2_arm926t=y
-# Linux headers same as kernel, a 3.10 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_10=y
-BR2_GLOBAL_PATCH_DIR="board/calao/usb-a9g20-lpw/patches"
-BR2_PACKAGE_HOST_SAM_BA=y
-BR2_TARGET_ROOTFS_UBIFS=y
-BR2_TARGET_AT91BOOTSTRAP=y
-BR2_TARGET_AT91BOOTSTRAP_BOARD="usb_a9g20_lpw"
-BR2_TARGET_AT91BOOTSTRAP_NANDFLASH=y
-BR2_TARGET_BAREBOX=y
-BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="usb_a9g20"
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.10.10"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/calao/usb-a9g20-lpw/linux-3.4.4.config"

configs/ci20_defconfig

@@ -1,6 +1,6 @@
 # architecture
 BR2_mipsel=y
-BR2_mips_32r2=y
+BR2_mips_xburst=y
 # BR2_MIPS_SOFT_FLOAT is not set
 
 # Linux headers same as kernel, a 3.18 series

configs/freescale_imx28evk_defconfig

@@ -11,7 +11,7 @@ BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.4"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.8"
 BR2_LINUX_KERNEL_DEFCONFIG="mxs"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx28-evk"

configs/freescale_imx31_3stack_defconfig

@@ -3,18 +3,18 @@ BR2_arm=y
 BR2_arm1136jf_s=y
 BR2_ARM_EABIHF=y
 
-# Linux headers same as kernel, a 3.15 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_15=y
+# Linux headers same as kernel, a 4.1 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_1=y
 
 # system
 BR2_TARGET_GENERIC_GETTY_PORT="ttymxc0"
 
 # kernel
 BR2_LINUX_KERNEL=y
-# Note: sadly the Linux kernel will not boot on the i.MX31 PDK, starting with
-# v3.16 and at least up to v4.0-rc4; this is why we use v3.15.y here.
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.15.10"
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="git://git.freescale.com/imx/linux-imx.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_imx_4.1.15_2.0.0_ga"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
+BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/freescale/imx31_3stack/linux.fragment"
 BR2_TARGET_ROOTFS_CPIO_GZIP=y
 BR2_TARGET_ROOTFS_INITRAMFS=y

configs/freescale_p2020ds_defconfig

@@ -1,24 +0,0 @@
-# Architecture
-BR2_powerpc=y
-BR2_powerpc_8548=y
-
-# Filesystem
-# BR2_TARGET_ROOTFS_TAR is not set
-BR2_TARGET_ROOTFS_JFFS2=y
-
-# Linux headers same as kernel, a 3.12 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_12=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="http://git.freescale.com/git/cgit.cgi/ppc/sdk/linux.git/snapshot/fsl-sdk-v1.6.tar.bz2"
-BR2_LINUX_KERNEL_PATCH="board/freescale/p2020ds/linux-fix-c6187597-breakage.patch"
-BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
-BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/freescale/p2020ds/linux-3.12.config"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="p2020ds"
-
-# Serial port config
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttyS0"

configs/imx6ulpico_defconfig

@@ -17,7 +17,7 @@ BR2_GLOBAL_PATCH_DIR="board/technexion/imx6ulpico/patches"
 # kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.11"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/technexion/imx6ulpico/linux.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/kb9202_defconfig

@@ -1,17 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm920t=y
-
-# Filesystem
-BR2_TARGET_ROOTFS_TAR=y
-
-# Linux headers same as kernel, a 2.6 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_REALLY_OLD=y
-
-# Kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.38.8"
-BR2_LINUX_KERNEL_PATCH="http://maxim.org.za/AT91RM9200/2.6/2.6.38-at91.patch.gz"
-BR2_LINUX_KERNEL_USE_DEFCONFIG=y
-BR2_LINUX_KERNEL_DEFCONFIG="kb9202"

configs/mini2440_defconfig

@@ -1,34 +0,0 @@
-# Architecture
-BR2_arm=y
-BR2_arm920t=y
-
-# Serial port
-BR2_TARGET_GENERIC_GETTY=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttySAC0"
-
-# Filesystem
-BR2_TARGET_ROOTFS_JFFS2=y
-BR2_TARGET_ROOTFS_JFFS2_NANDFLASH_128K=y
-BR2_TARGET_ROOTFS_JFFS2_PAGESIZE=0x800
-BR2_TARGET_ROOTFS_JFFS2_EBSIZE=0x20000
-BR2_TARGET_ROOTFS_JFFS2_NOCLEANMARKER=y
-BR2_TARGET_ROOTFS_JFFS2_LE=y
-BR2_TARGET_ROOTFS_TAR=y
-
-# Linux headers same as kernel, a 3.0 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_0=y
-
-# Bootloader
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="mini2440"
-BR2_TARGET_UBOOT_CUSTOM_TARBALL=y
-BR2_TARGET_UBOOT_CUSTOM_TARBALL_LOCATION="http://repo.or.cz/w/u-boot-openmoko/mini2440.git/snapshot/dev-mini2440-stable.tar.gz"
-
-#
-# Kernel
-#
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="3.0.4"
-BR2_LINUX_KERNEL_DEFCONFIG="mini2440"
-BR2_LINUX_KERNEL_UIMAGE=y

configs/mx6udoo_defconfig

@@ -15,7 +15,7 @@ BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="SPL"
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.11"
 BR2_LINUX_KERNEL_DEFCONFIG="imx_v6_v7"
 BR2_LINUX_KERNEL_CONFIG_FRAGMENT_FILES="board/udoo/linux.fragment"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y

configs/nanopi_neo_defconfig

@@ -11,11 +11,10 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to Buildroot for the NanoPi NEO"
 BR2_ROOTFS_POST_BUILD_SCRIPT="board/nanopi-neo/post-build.sh"
 BR2_ROOTFS_POST_IMAGE_SCRIPT="board/nanopi-neo/post-image.sh"
 
-# Use a special kernel tree until all support finally lands upstream
+# Use a -rc kernel to get the DTS
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/yann-morin-1998/linux"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="4.9-rc3-sunxi-next-2016-11-02"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.9-rc3"
 BR2_LINUX_KERNEL_DEFCONFIG="sunxi"
 BR2_LINUX_KERNEL_DTS_SUPPORT=y
 BR2_LINUX_KERNEL_INTREE_DTS_NAME="sun8i-h3-nanopi-neo"

configs/olimex_a20_olinuxino_lime2_defconfig

@@ -25,7 +25,7 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino-Lime2"
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.01"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.05"
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"
 BR2_PACKAGE_HOST_GENIMAGE=y

configs/olimex_a20_olinuxino_lime_defconfig

@@ -32,9 +32,10 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 
 # Bootloaders
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino-Lime"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
 BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_UBOOT_SPL=y

configs/olimex_a20_olinuxino_lime_mali_defconfig

@@ -17,8 +17,10 @@ BR2_ROOTFS_POST_SCRIPT_ARGS="board/olimex/a20_olinuxino/boot-mali.cmd $(TARGET_D
 
 # Kernel
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL=y
-BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,linux-sunxi,linux-sunxi,sunxi-v3.4.103-r1)/sunxi-v3.4.103-r1.tar.gz"
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/dan-and/linux-sunxi.git"
+# based on Linux version 3.4.113
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="dbabbacbbf8984dea0a8c893b38b376a6ecbb3c1"
 BR2_LINUX_KERNEL_USE_DEFCONFIG=y
 BR2_LINUX_KERNEL_DEFCONFIG="sun7i"
 BR2_LINUX_KERNEL_INSTALL_TARGET=y
@@ -37,9 +39,11 @@ BR2_TARGET_ROOTFS_EXT2_4=y
 
 # Bootloaders
 BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="A20-OLinuXino-Lime"
+BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2015.01"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.09.01"
+BR2_TARGET_UBOOT_BOARD_DEFCONFIG="A20-OLinuXino-Lime"
+BR2_TARGET_UBOOT_NEEDS_DTC=y
 BR2_TARGET_UBOOT_FORMAT_BIN=y
 BR2_TARGET_UBOOT_SPL=y
 BR2_TARGET_UBOOT_SPL_NAME="u-boot-sunxi-with-spl.bin"

configs/qmx6_defconfig

@@ -1,33 +0,0 @@
-BR2_arm=y
-BR2_cortex_a9=y
-# Linux headers same as kernel, a 3.14 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_14=y
-BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
-
-# Notice you need a recent version of u-boot (with DT support) to be able
-# to boot this kernel
-BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/imx6_kernel_3.14.git"
-# Last version of branch cgt_qmx6_3.14.28_1.0.0
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="105820d6bd251deb49c3dd3f71fa0d76adce97c7"
-BR2_LINUX_KERNEL_DEFCONFIG="qmx6"
-BR2_LINUX_KERNEL_UIMAGE=y
-BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
-BR2_LINUX_KERNEL_DTS_SUPPORT=y
-BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-qmx6"
-BR2_LINUX_KERNEL_INSTALL_TARGET=y
-
-# Change boardname depending of your product number
-BR2_TARGET_UBOOT=y
-BR2_TARGET_UBOOT_BOARDNAME="cgt_qmx6_pn016103"
-BR2_TARGET_UBOOT_CUSTOM_GIT=y
-BR2_TARGET_UBOOT_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_uboot.git"
-BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="4d3b64e93064ed3d97ef7d91ff0f61a693a460fc"
-BR2_TARGET_UBOOT_FORMAT_CUSTOM=y
-BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot.pn016103.imx"
-
-BR2_TARGET_ROOTFS_EXT2=y
-BR2_TARGET_ROOTFS_EXT2_3=y
-
-BR2_PACKAGE_HOST_UBOOT_TOOLS=y

configs/snps_aarch64_vdk_defconfig

@@ -1,12 +1,10 @@
 BR2_aarch64=y
-# Linux headers same as kernel, a 3.18 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_18=y
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_6=y
 BR2_TARGET_GENERIC_HOSTNAME="vdk-buildroot"
 BR2_TARGET_GENERIC_ISSUE="Welcome to SNPS VDK by Buildroot"
 BR2_LINUX_KERNEL=y
-BR2_LINUX_KERNEL_CUSTOM_GIT=y
-BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.linaro.org/kernel/linux-linaro-tracking.git"
-BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="linux-linaro-3.18-2014.12"
+BR2_LINUX_KERNEL_CUSTOM_VERSION=y
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.6"
 BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
 BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/synopsys/vdk/linux-vdk-aarch64-defconfig"
 BR2_TARGET_ROOTFS_EXT2=y

configs/snps_axs101_defconfig

@@ -8,19 +8,19 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_OVERLAY="board/synopsys/axs10x/fs-overlay"
 
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="axs101"
 
 # Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.11"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="axs101"
 BR2_TARGET_UBOOT_NEEDS_DTC=y

configs/snps_axs103_defconfig

@@ -9,19 +9,19 @@ BR2_TARGET_ROOTFS_INITRAMFS=y
 BR2_SYSTEM_DHCP="eth0"
 BR2_ROOTFS_OVERLAY="board/synopsys/axs10x/fs-overlay"
 
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="axs103_smp"
 
 # Bootloader
 BR2_TARGET_UBOOT=y
 BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG=y
 BR2_TARGET_UBOOT_CUSTOM_VERSION=y
-BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.07"
+BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE="2016.11"
 BR2_TARGET_UBOOT_BOARD_DEFCONFIG="axs103"
 BR2_TARGET_UBOOT_NEEDS_DTC=y

configs/snps_hs38_smp_vdk_defconfig

@@ -8,12 +8,12 @@ BR2_TARGET_GENERIC_ISSUE="Welcome to the HS38 VDK Software Development Platform"
 BR2_ROOTFS_OVERLAY="board/synopsys/axs10x/fs-overlay"
 BR2_TARGET_ROOTFS_EXT2=y
 
-# Linux headers same as kernel, a 4.7 series
-BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_7=y
+# Linux headers same as kernel, a 4.8 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y
 
 # Kernel
 BR2_LINUX_KERNEL=y
 BR2_LINUX_KERNEL_CUSTOM_VERSION=y
-BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.7"
+BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.8.6"
 BR2_LINUX_KERNEL_DEFCONFIG="vdk_hs38_smp"
 BR2_LINUX_KERNEL_VMLINUX=y

docs/manual/customize-outside-br.txt

@@ -217,8 +217,8 @@ illustration, of course):
   |     `----
   |
   |- Config.in
-  |     |source "$BR2_EXTERNAL_BAR_42_DIR/package/pkg-1/Config.in
-  |     |source "$BR2_EXTERNAL_BAR_42_DIR/package/pkg-2/Config.in
+  |     |source "$BR2_EXTERNAL_BAR_42_PATH/package/pkg-1/Config.in"
+  |     |source "$BR2_EXTERNAL_BAR_42_PATH/package/pkg-2/Config.in"
   |     |
   |     |config BAR_42_FLASH_ADDR
   |     |    hex "my-board flash address"
@@ -229,7 +229,7 @@ illustration, of course):
   |     |include $(sort $(wildcard $(BR2_EXTERNAL_BAR_42_PATH)/package/*/*.mk))
   |     |
   |     |flash-my-board:
-  |     |    $(BR2_EXTERNAL_BAR_42_DIR)/board/my-board/flash-image \
+  |     |    $(BR2_EXTERNAL_BAR_42_PATH)/board/my-board/flash-image \
   |     |        --image $(BINARIES_DIR)/image.bin \
   |     |        --address $(BAR_42_FLASH_ADDR)
   |     `----

docs/website/download.html

@@ -42,37 +42,37 @@
 	</div>
       </div>
 
-      <h3 style="text-align: center;">Latest release candidate: <b>2016.11-rc1</b></h3>
+      <h3 style="text-align: center;">Latest release candidate: <b>2016.11-rc3</b></h3>
       <div class="row mt centered">
 	<div class="col-sm-6">
 	  <div class="flip-container center-block" ontouchstart="this.classList.toggle('hover');">
 	    <div class="flipper">
 	      <div class="front">
-		<a href="/downloads/buildroot-2016.11-rc1.tar.gz"><img src="images/zip.png" width="180" alt=""></a>
+		<a href="/downloads/buildroot-2016.11-rc3.tar.gz"><img src="images/zip.png" width="180" alt=""></a>
 	      </div>
 	      <div class="back">
-		<a href="/downloads/buildroot-2016.11-rc1.tar.gz"><img src="images/zip.png" width="180" alt=""></a>
+		<a href="/downloads/buildroot-2016.11-rc3.tar.gz"><img src="images/zip.png" width="180" alt=""></a>
 	      </div>
 	    </div>
 	  </div>
 
-	  <h3><a href="/downloads/buildroot-2016.11-rc1.tar.gz">buildroot-2016.11-rc1.tar.gz</a></h3>
-	  <p><a href="/downloads/buildroot-2016.11-rc1.tar.gz.sign">PGP signature</a></p>
+	  <h3><a href="/downloads/buildroot-2016.11-rc3.tar.gz">buildroot-2016.11-rc3.tar.gz</a></h3>
+	  <p><a href="/downloads/buildroot-2016.11-rc3.tar.gz.sign">PGP signature</a></p>
 	</div>
 	<div class="col-sm-6">
 	  <div class="flip-container center-block" ontouchstart="this.classList.toggle('hover');">
 	    <div class="flipper">
 	      <div class="front">
-		<a href="/downloads/buildroot-2016.11-rc1.tar.bz2"><img src="images/package.png" width="180" alt=""></a>
+		<a href="/downloads/buildroot-2016.11-rc3.tar.bz2"><img src="images/package.png" width="180" alt=""></a>
 	      </div>
 	      <div class="back">
-		<a href="/downloads/buildroot-2016.11-rc1.tar.bz2"><img src="images/package.png" width="180" alt=""></a>
+		<a href="/downloads/buildroot-2016.11-rc3.tar.bz2"><img src="images/package.png" width="180" alt=""></a>
 	      </div>
 	    </div>
 	  </div>
 
-	  <h3><a href="/downloads/buildroot-2016.11-rc1.tar.bz2">buildroot-2016.11-rc1.tar.bz2</a></h3>
-	  <p><a href="/downloads/buildroot-2016.11-rc1.tar.bz2.sign">PGP signature</a></p>
+	  <h3><a href="/downloads/buildroot-2016.11-rc3.tar.bz2">buildroot-2016.11-rc3.tar.bz2</a></h3>
+	  <p><a href="/downloads/buildroot-2016.11-rc3.tar.bz2.sign">PGP signature</a></p>
 	</div>
       </div>
 

docs/website/news.html

@@ -9,6 +9,52 @@
 <h2>News</h2>
 <ul class="timeline">
 
+  <li class="timeline-inverted">
+    <div class="timeline-badge"><i class="glyphicon glyphicon-thumbs-up"></i></div>
+    <div class="timeline-panel">
+      <div class="timeline-heading">
+	<h4 class="timeline-title">2016.11-rc3 released</h4>
+	<p><small class="text-muted"><i class="glyphicon glyphicon-time"></i>28 November 2016</small></p>
+      </div>
+      <div class="timeline-body">
+	<p>Release candidate 3 is out with more cleanups and security
+	  / build fixes. See
+	  the <a href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2016.11-rc3">CHANGES</a>
+	  file for details.</p>
+	<p>Head to the <a href="/downloads/">downloads page</a> to
+	  pick up
+	  the <a href="/downloads/buildroot-2016.11-rc3.tar.bz2">2016.11-rc3
+	    release candidate</a>, and report any problems found to
+	  the <a href="support.html">mailing list</a>
+	  or <a href="https://bugs.uclibc.org">bug tracker</a>.</p>
+      </div>
+    </div>
+  </li>
+
+  <li>
+    <div class="timeline-badge"><i class="glyphicon glyphicon-thumbs-up"></i></div>
+    <div class="timeline-panel">
+      <div class="timeline-heading">
+	<h4 class="timeline-title">2016.11-rc2 released</h4>
+	<p><small class="text-muted"><i class="glyphicon glyphicon-time"></i>13 November 2016</small></p>
+      </div>
+      <div class="timeline-body">
+	<p>We have a new release candidate! Lots of
+	  changes all over the tree, see
+	  the <a href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2016.11-rc2">CHANGES</a>
+	  file for details.
+	</p>
+
+	<p>Head to the <a href="/downloads/">downloads page</a> to pick up the
+	  <a href="/downloads/buildroot-2016.11-rc2.tar.bz2">2016.11-rc2
+	    release candidate</a>, and report any
+	  problems found to the
+	  <a href="support.html">mailing list</a> or
+	  <a href="https://bugs.buildroot.org">bug tracker</a>.</p>
+      </div>
+    </div>
+  </li>
+
   <li class="timeline-inverted">
     <div class="timeline-badge"><i class="glyphicon glyphicon-thumbs-up"></i></div>
     <div class="timeline-panel">
@@ -20,7 +66,8 @@
 	<p>We have a new release candidate! Lots of
 	  changes all over the tree, see
 	  the <a href="http://git.buildroot.net/buildroot/plain/CHANGES?id=2016.11-rc1">CHANGES</a>
-	  file for details.
+	  file for details, read the
+	  <a href="http://lists.busybox.net/pipermail/buildroot/2016-November/176453.html">announcement</a>.
 	</p>
 
 	<p>Head to the <a href="/downloads/">downloads page</a> to pick up the

fs/common.mk

@@ -43,7 +43,7 @@ ROOTFS_USERS_TABLES = $(call qstrip,$(BR2_ROOTFS_USERS_TABLES))
 define ROOTFS_TARGET_INTERNAL
 
 # extra deps
-ROOTFS_$(2)_DEPENDENCIES += host-pseudo host-makedevs \
+ROOTFS_$(2)_DEPENDENCIES += host-fakeroot host-makedevs \
 	$$(if $$(PACKAGES_USERS)$$(ROOTFS_USERS_TABLES),host-mkpasswd)
 
 ifeq ($$(BR2_TARGET_ROOTFS_$(2)_GZIP),y)
@@ -97,7 +97,7 @@ endif
 		echo $$(s) $$(TARGET_DIR) $$(BR2_ROOTFS_POST_SCRIPT_ARGS) >> $$(FAKEROOT_SCRIPT)$$(sep))
 	$$(call PRINTF,$$(ROOTFS_$(2)_CMD)) >> $$(FAKEROOT_SCRIPT)
 	chmod a+x $$(FAKEROOT_SCRIPT)
-	PATH=$$(BR_PATH) $$(HOST_DIR)/usr/bin/pseudo -- $$(FAKEROOT_SCRIPT)
+	PATH=$$(BR_PATH) $$(HOST_DIR)/usr/bin/fakeroot -- $$(FAKEROOT_SCRIPT)
 	$$(INSTALL) -m 0644 support/misc/target-dir-warning.txt $$(TARGET_DIR_WARNING_FILE)
 	-@rm -f $$(FAKEROOT_SCRIPT) $$(FULL_DEVICE_TABLE)
 ifneq ($$(ROOTFS_$(2)_COMPRESS_CMD),)

fs/ext2/ext2.mk

@@ -20,12 +20,11 @@ ifneq ($(strip $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)),0)
 EXT2_OPTS += -r $(BR2_TARGET_ROOTFS_EXT2_RESBLKS)
 endif
 
-# Not qstrip-ing the variable, because it may contain spaces, but we must
-# qstrip it when checking. Furthermore, we need to further quote it, so
-# that the quotes do not get eaten by the echo statement when creating the
-# fakeroot script
-ifneq ($(call qstrip,$(BR2_TARGET_ROOTFS_EXT2_LABEL)),)
-EXT2_OPTS += -l '$(BR2_TARGET_ROOTFS_EXT2_LABEL)'
+# qstrip results in stripping consecutive spaces into a single one. So the
+# variable is not qstrip-ed to preserve the integrity of the string value.
+EXT2_LABEL := $(subst ",,$(BR2_TARGET_ROOTFS_EXT2_LABEL))
+ifneq ($(EXT2_LABEL),)
+EXT2_OPTS += -l "$(EXT2_LABEL)"
 endif
 
 ROOTFS_EXT2_DEPENDENCIES = host-mke2img

fs/ubifs/ubi.mk

@@ -20,9 +20,11 @@ else
 UBINIZE_CONFIG_FILE_PATH = fs/ubifs/ubinize.cfg
 endif
 
+# don't use sed -i as it misbehaves on systems with SELinux enabled when this is
+# executed through fakeroot (see #9386)
 define ROOTFS_UBI_CMD
-	$(INSTALL) -m 0644 $(UBINIZE_CONFIG_FILE_PATH) $(BUILD_DIR)/ubinize.cfg
-	$(SED) 's;BR2_ROOTFS_UBIFS_PATH;$@fs;' $(BUILD_DIR)/ubinize.cfg
+	sed 's;BR2_ROOTFS_UBIFS_PATH;$@fs;' \
+		$(UBINIZE_CONFIG_FILE_PATH) > $(BUILD_DIR)/ubinize.cfg
 	$(HOST_DIR)/usr/sbin/ubinize -o $@ $(UBI_UBINIZE_OPTS) $(BUILD_DIR)/ubinize.cfg
 	rm $(BUILD_DIR)/ubinize.cfg
 endef

linux/Config.in

@@ -26,7 +26,7 @@ choice
 	prompt "Kernel version"
 
 config BR2_LINUX_KERNEL_LATEST_VERSION
-	bool "Latest version (4.8.6)"
+	bool "Latest version (4.8.11)"
 
 config BR2_LINUX_KERNEL_CUSTOM_VERSION
 	bool "Custom version"
@@ -97,7 +97,7 @@ endif
 
 config BR2_LINUX_KERNEL_VERSION
 	string
-	default "4.8.6" if BR2_LINUX_KERNEL_LATEST_VERSION
+	default "4.8.11" if BR2_LINUX_KERNEL_LATEST_VERSION
 	default BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE \
 		if BR2_LINUX_KERNEL_CUSTOM_VERSION
 	default "custom" if BR2_LINUX_KERNEL_CUSTOM_TARBALL

package/assimp/Config.in

@@ -4,6 +4,11 @@ config BR2_PACKAGE_ASSIMP
 	# https://gcc.gnu.org/bugzilla/show_bug.cgi?id=71124, that
 	# cause an infinite loop in gcc when building this package.
 	depends on !BR2_microblaze
+	# The ADI Blackfin toolchain does not build assimp properly,
+	# fails with "internal compiler error: in simplify_subreg, at
+	# simplify-rtx.c:5001". It builds fine with a mainline gcc for
+	# Blackfin.
+	depends on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX
 	depends on BR2_INSTALL_LIBSTDCPP
 	select BR2_PACKAGE_ZLIB
 	help

package/autossh/0001-honour-LDFLAGS.patch

@@ -0,0 +1,16 @@
+Honour LDFLAGS, especially required when static linking
+
+Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
+
+diff -Nur autossh-1.4e.orig/Makefile.in autossh-1.4e/Makefile.in
+--- autossh-1.4e.orig/Makefile.in	2015-02-10 05:41:58.000000000 +0100
++++ autossh-1.4e/Makefile.in	2016-11-25 12:49:06.052122855 +0100
+@@ -31,7 +31,7 @@
+ 
+ 
+ $(TARGET):	$(OFILES)
+-		$(CC) $(CPPFLAGS) -o $(TARGET) $(OFILES) $(LIBS)
++		$(CC) $(CPPFLAGS) $(LDFLAGS) -o $(TARGET) $(OFILES) $(LIBS)
+ 
+ clean:
+ 		- /bin/rm -f *.o *.a *.core *~

package/binutils/2.27/0100-elf32-arm-no-data-fix.patch

@@ -0,0 +1,22 @@
+bfd/ChangeLog
+2016-08-23  Nick Clifton  <address@hidden>
+
+        * elf32-arm.c (elf32_arm_count_additional_relocs): Return zero if
+        there is no arm data associated with the section.
+
+[Thomas: taken from https://lists.gnu.org/archive/html/bug-binutils/2016-08/msg00165.html.]
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+
+diff --git a/bfd/elf32-arm.c b/bfd/elf32-arm.c
+index 1eba21b..4478238 100644
+--- a/bfd/elf32-arm.c
++++ b/bfd/elf32-arm.c
+@@ -18688,7 +18688,7 @@ elf32_arm_count_additional_relocs (asection *sec)
+ {
+   struct _arm_elf_section_data *arm_data;
+   arm_data = get_arm_elf_section_data (sec);
+-  return arm_data->additional_reloc_count;
++  return arm_data == NULL ? 0 : arm_data->additional_reloc_count;
+ }
+ 
+ /* Called to set the sh_flags, sh_link and sh_info fields of OSECTION which

package/binutils/2.27/0900-Revert-part-Set-dynamic-tag-VMA-and-size-from-dynami.patch

@@ -0,0 +1,36 @@
+From c646b02fdcae5f37bd88f33a0c4683ef13ad5c82 Mon Sep 17 00:00:00 2001
+From: Alan Modra <amodra@gmail.com>
+Date: Mon, 31 Oct 2016 12:46:38 +1030
+Subject: [PATCH] Revert part "Set dynamic tag VMA and size from dynamic
+ section when possible"
+
+	PR 20748
+	* elf32-microblaze.c (microblaze_elf_finish_dynamic_sections): Revert
+	2016-05-13 change.
+
+Signed-off-by: Alan Modra <amodra@gmail.com>
+Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
+
+diff --git a/bfd/elf32-microblaze.c b/bfd/elf32-microblaze.c
+index 477e7b3..5c66808 100644
+--- a/bfd/elf32-microblaze.c
++++ b/bfd/elf32-microblaze.c
+@@ -3396,13 +3396,13 @@ microblaze_elf_finish_dynamic_sections (bfd *output_bfd,
+             {
+               asection *s;
+ 
+-              s = bfd_get_linker_section (dynobj, name);
++              s = bfd_get_section_by_name (output_bfd, name);
+               if (s == NULL)
+                 dyn.d_un.d_val = 0;
+               else
+                 {
+                   if (! size)
+-                    dyn.d_un.d_ptr = s->output_section->vma + s->output_offset;
++                    dyn.d_un.d_ptr = s->vma;
+                   else
+                     dyn.d_un.d_val = s->size;
+                 }
+-- 
+2.1.4
+

package/binutils/Config.in.host

@@ -17,15 +17,12 @@ choice
 
 	config BR2_BINUTILS_VERSION_2_27_X
 		bool "binutils 2.27"
-		# supported but broken on Microblaze
-		# see https://sourceware.org/bugzilla/show_bug.cgi?id=20748
-		depends on !BR2_microblaze
 
 endchoice
 
 config BR2_BINUTILS_VERSION
 	string
-	default "arc-2016.09-eng015"	if BR2_arc
+	default "arc-2016.09-rc1"	if BR2_arc
 	default "2.25.1"	if BR2_BINUTILS_VERSION_2_25_X
 	default "2.26.1"	if BR2_BINUTILS_VERSION_2_26_X
 	default "2.27"		if BR2_BINUTILS_VERSION_2_27_X

package/binutils/binutils.hash

@@ -5,4 +5,4 @@ sha512  9d9165609fd3b0f20d616f9891fc8e2b466eb13e2bfce40125e12427f8f201d20e2b8322
 sha512	cf276f84935312361a2ca077e04d0b469d23a3aed979d8ba5d92ea590904ffb2c2e7ed12cc842822bfc402836be86f479660cef3791aa62f3753d8a1a6f564cb  binutils-2.27.tar.bz2
 
 # Locally calculated (fetched from Github)
-sha512  f8cc7529fbe3cb52b666b92e1353063a8a36ea07fa8c5aa8359252f4222feaed15253b6a137033c74dabc0ae784daf8a7978e69ebdb8bf8cd6b8bb61c84bf181  binutils-arc-2016.09-eng015.tar.gz
+sha512  d0befdeb0a7b76efd1ad655fc062cde2aa67be7b26210c913ab2709e069d815c4ff2863ce7add1f6434da5a2f4faf1ce5a5bc3d0e64f3e04548a7479f24edcbc  binutils-arc-2016.09-rc1.tar.gz

package/binutils/binutils.mk

@@ -9,7 +9,7 @@
 BINUTILS_VERSION = $(call qstrip,$(BR2_BINUTILS_VERSION))
 ifeq ($(BINUTILS_VERSION),)
 ifeq ($(BR2_arc),y)
-BINUTILS_VERSION = arc-2016.09-eng015
+BINUTILS_VERSION = arc-2016.09-rc1
 else
 BINUTILS_VERSION = 2.25.1
 endif

package/ccache/ccache.hash

@@ -1,2 +1,2 @@
-# Verified key https://samba.org/ftp/ccache/ccache-3.3.2.tar.xz.asc - sha256 computed locally
-sha256	907685cb23d8f82074b8d1a9b4ebabb36914d151ac7b96a840c68c08d1a14530	ccache-3.3.2.tar.xz
+# Verified key https://samba.org/ftp/ccache/ccache-3.3.3.tar.xz.asc - sha256 computed locally
+sha256  3b02a745da1cfa9eb438af7147e0fd3545e2f6163de9e5b07da86f58859f04ec  ccache-3.3.3.tar.xz

package/ccache/ccache.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-CCACHE_VERSION = 3.3.2
+CCACHE_VERSION = 3.3.3
 CCACHE_SITE = https://samba.org/ftp/ccache
 CCACHE_SOURCE = ccache-$(CCACHE_VERSION).tar.xz
 CCACHE_LICENSE = GPLv3+, others

package/chrony/chrony.mk

@@ -34,6 +34,12 @@ else
 CHRONY_CONF_OPTS += --disable-readline
 endif
 
+# If pps-tools is available, build it before so the package can use it
+# (HAVE_SYS_TIMEPPS_H).
+ifeq ($(BR2_PACKAGE_PPS_TOOLS),y)
+CHRONY_DEPENDENCIES += pps-tools
+endif
+
 define CHRONY_CONFIGURE_CMDS
 	cd $(@D) && $(TARGET_CONFIGURE_OPTS) ./configure $(CHRONY_CONF_OPTS)
 endef

package/czmq/0001-configure.ac-remove-Werror.patch

@@ -0,0 +1,30 @@
+From 9a195dc573f4eed130773e6ef67efd5f71693e97 Mon Sep 17 00:00:00 2001
+From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+Date: Sat, 5 Nov 2016 15:33:57 +0100
+Subject: [PATCH] configure.ac: remove -Werror
+
+-Werror shouldn't be used in releases, as it can break the build with
+newer versions of the compiler or the C library, when new warnings
+are introduced.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ configure.ac | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/configure.ac b/configure.ac
+index e92970a..2fd551a 100755
+--- a/configure.ac
++++ b/configure.ac
+@@ -344,7 +344,7 @@ AC_C_BIGENDIAN
+ 
+ # These options are GNU compiler specific.
+ if test "x$GCC" = "xyes"; then
+-    CPPFLAGS="-pedantic -Werror -Wall -Wc++-compat ${CPPFLAGS}"
++    CPPFLAGS="-pedantic -Wall -Wc++-compat ${CPPFLAGS}"
+ fi
+ 
+ AM_CONDITIONAL(ENABLE_SHARED, test "x$enable_shared" = "xyes")
+-- 
+2.7.4
+

package/domoticz/Config.in

@@ -6,6 +6,8 @@ config BR2_PACKAGE_DOMOTICZ
 	depends on BR2_INSTALL_LIBSTDCPP
 	depends on BR2_USE_WCHAR
 	depends on BR2_PACKAGE_LUA_5_2 || BR2_PACKAGE_LUA_5_3
+	# These result in internal compiler error
+	depends on !BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH
 	select BR2_PACKAGE_BOOST
 	select BR2_PACKAGE_BOOST_DATE_TIME
 	select BR2_PACKAGE_BOOST_SYSTEM
@@ -26,6 +28,7 @@ config BR2_PACKAGE_DOMOTICZ
 
 comment "domoticz needs lua >= 5.2 and a toolchain w/ C++, threads, wchar, dynamic library"
 	depends on BR2_USE_MMU
+	depends on !BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_SH
 	depends on !BR2_INSTALL_LIBSTDCPP || !BR2_TOOLCHAIN_HAS_THREADS || \
 		!BR2_USE_WCHAR || BR2_STATIC_LIBS || \
 		!(BR2_PACKAGE_LUA_5_2 || BR2_PACKAGE_LUA_5_3)

package/dosfstools/Config.in.host

@@ -3,4 +3,4 @@ config BR2_PACKAGE_HOST_DOSFSTOOLS
 	help
 	  Tools for creating and checking DOS FAT filesystems.
 
-	  http://www.daniel-baumann.ch/software/dosfstools/
+	  https://github.com/dosfstools/dosfstools

package/dtv-scan-tables/dtv-scan-tables.mk

@@ -17,6 +17,15 @@ DTV_SCAN_TABLES_SITE_METHOD = git
 DTV_SCAN_TABLES_LICENSE = GPLv2, LGPLv2.1
 DTV_SCAN_TABLES_LICENSE_FILES = COPYING COPYING.LGPL
 
+# In order to avoid issues with file name encodings, we rename the
+# only dtv-scan-tables file that has non-ASCII characters to have a
+# name using only ASCII characters (pl-Krosno_Sucha_Gora)
+define DTV_SCAN_TABLES_FIX_NONASCII_FILENAMES
+	mv $(@D)/dvb-t/pl-Krosno_Sucha* $(@D)/dvb-t/pl-Krosno_Sucha_Gora
+endef
+
+DTV_SCAN_TABLES_POST_PATCH_HOOKS += DTV_SCAN_TABLES_FIX_NONASCII_FILENAMES
+
 define DTV_SCAN_TABLES_INSTALL_TARGET_CMDS
 	for f in atsc dvb-c dvb-s dvb-t; do \
 		$(INSTALL) -d -m 0755 $(TARGET_DIR)/usr/share/dvb/$$f; \

package/e2fsprogs/e2fsprogs.mk

@@ -51,6 +51,12 @@ endif
 # for util/subst.c to build properly.
 E2FSPROGS_CONF_ENV += BUILD_CFLAGS="-DHAVE_SYS_STAT_H"
 
+# Disable use of the host magic.h, as on older hosts (e.g. RHEL 5)
+# it doesn't provide definitions expected by e2fsprogs support lib.
+HOST_E2FSPROGS_CONF_ENV += \
+	ac_cv_header_magic_h=no \
+	ac_cv_lib_magic_magic_file=no
+
 ifeq ($(BR2_NEEDS_GETTEXT_IF_LOCALE),y)
 # util-linux libuuid pulls in libintl if needed, so ensure we also
 # link against it, otherwise static linking fails

package/efl/Config.in

@@ -14,7 +14,6 @@ config BR2_PACKAGE_EFL
 	select BR2_PACKAGE_FREETYPE
 	select BR2_PACKAGE_JPEG # Emile needs libjpeg
 	select BR2_PACKAGE_LIBCURL # Ecore_con_url, runtime dependency
-	select BR2_PACKAGE_LIBXKBCOMMON if BR2_PACKAGE_WAYLAND
 	# https://phab.enlightenment.org/T2728
 	select BR2_PACKAGE_LUAJIT # Lua support broken
 	select BR2_PACKAGE_UTIL_LINUX

package/efl/efl.mk

@@ -42,6 +42,7 @@ EFL_CONF_OPTS = \
 	--disable-sdl \
 	--disable-spectre \
 	--disable-xinput22 \
+	--disable-wayland \
 	--with-doxygen=no
 
 # Disable untested configuration warning.
@@ -145,13 +146,6 @@ else
 EFL_CONF_OPTS += --with-crypto=none
 endif # BR2_PACKAGE_OPENSSL
 
-ifeq ($(BR2_PACKAGE_WAYLAND),y)
-EFL_DEPENDENCIES += wayland libxkbcommon
-EFL_CONF_OPTS += --enable-wayland
-else
-EFL_CONF_OPTS += --disable-wayland
-endif
-
 ifeq ($(BR2_PACKAGE_EFL_ELPUT),y)
 EFL_CONF_OPTS += --enable-elput
 EFL_DEPENDENCIES += libinput libxkbcommon

package/fakeroot/0001-hide-dlsym-error.patch

@@ -0,0 +1,34 @@
+Description: Hide error from dlsym()
+ dlsym(), starting in glibc 2.24 actually reports errors. In our case,
+ we try to get ACL functions which are not in the glibc. This causes
+ failures in test suites, so hide those messages for non-debugging
+ purposes for now. It also makes the build logs annoying to read.
+Author: Julian Andres Klode <juliank@ubuntu.com>
+Origin: vendor
+Bug-Debian: https://bugs.debian.org/830912
+Forwarded: no
+Last-Update: 2016-08-12
+
+Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
+
+--- a/libfakeroot.c
++++ b/libfakeroot.c
+@@ -256,10 +256,16 @@ void load_library_symbols(void){
+  /* clear dlerror() just in case dlsym() legitimately returns NULL */
+     msg = dlerror();
+     *(next_wrap[i].doit)=dlsym(get_libc(), next_wrap[i].name);
++
+     if ( (msg = dlerror()) != NULL){
+-      fprintf (stderr, "dlsym(%s): %s\n", next_wrap[i].name, msg);
+-/*    abort ();*/
++#ifdef LIBFAKEROOT_DEBUGGING
++      if (fakeroot_debug) {
++        fprintf (stderr, "dlsym(%s): %s\n", next_wrap[i].name, msg);
++/*      abort ();*/
++      }
++#endif
+     }
++
+   }
+ }
+

package/fakeroot/fakeroot.hash

@@ -0,0 +1,4 @@
+# From http://snapshot.debian.org/package/fakeroot/1.20.2-1/
+sha1	367040df07043edb630942b21939e493f3fad888	fakeroot_1.20.2.orig.tar.bz2
+# Calculated based on the hash above
+sha256	7c0a164d19db3efa9e802e0fc7cdfeff70ec6d26cdbdc4338c9c2823c5ea230c	fakeroot_1.20.2.orig.tar.bz2

package/fakeroot/fakeroot.mk

@@ -0,0 +1,20 @@
+################################################################################
+#
+# fakeroot
+#
+################################################################################
+
+FAKEROOT_VERSION = 1.20.2
+FAKEROOT_SOURCE = fakeroot_$(FAKEROOT_VERSION).orig.tar.bz2
+FAKEROOT_SITE = http://snapshot.debian.org/archive/debian/20141005T221953Z/pool/main/f/fakeroot
+# Force capabilities detection off
+# For now these are process capabilities (faked) rather than file
+# so they're of no real use
+HOST_FAKEROOT_CONF_ENV = \
+	ac_cv_header_sys_capability_h=no \
+	ac_cv_func_capset=no
+
+FAKEROOT_LICENSE = GPLv3+
+FAKEROOT_LICENSE_FILES = COPYING
+
+$(eval $(host-autotools-package))

package/ffmpeg/Config.in

@@ -2,7 +2,8 @@ config BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS
 	bool
 	# fenv.h lacks FE_INVALID, FE_OVERFLOW & FE_UNDERFLOW on nios2
 	# No support for ARMv7-M in the ARM assembly logic
-	default y if !BR2_nios2 && !BR2_ARM_CPU_ARMV7M
+	# Microblaze build affected by gcc PR71124 (infinite loop)
+	default y if !BR2_nios2 && !BR2_ARM_CPU_ARMV7M && !BR2_microblaze
 
 menuconfig BR2_PACKAGE_FFMPEG
 	bool "ffmpeg"

package/gcc/4.8.5/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch

@@ -0,0 +1,43 @@
+From edb9057c195c41dd7bcd8603e5fd420359edd520 Mon Sep 17 00:00:00 2001
+From: nsz <nsz@138bc75d-0d04-0410-961f-82ee72b054a4>
+Date: Mon, 23 Nov 2015 15:17:55 +0000
+Subject: [PATCH] [ARM] PR target/68059 libgcc should not use __write for
+ printing fatal error
+
+libgcc/
+	PR target/68059
+	* config/arm/linux-atomic-64bit.c (__write): Rename to...
+	(write): ...this and fix the return type.
+
+git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230762 138bc75d-0d04-0410-961f-82ee72b054a4
+
+Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
+---
+ libgcc/config/arm/linux-atomic-64bit.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/libgcc/config/arm/linux-atomic-64bit.c b/libgcc/config/arm/linux-atomic-64bit.c
+index 7aa8dfc..570b4ce 100644
+--- a/libgcc/config/arm/linux-atomic-64bit.c
++++ b/libgcc/config/arm/linux-atomic-64bit.c
+@@ -33,7 +33,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+    kernels; we check for that in an init section and bail out rather
+    unceremoneously.  */
+ 
+-extern unsigned int __write (int fd, const void *buf, unsigned int count);
++extern int write (int fd, const void *buf, unsigned int count);
+ extern void abort (void);
+ 
+ /* Kernel helper for compare-and-exchange.  */
+@@ -56,7 +56,7 @@ static void __check_for_sync8_kernelhelper (void)
+ 	 for the user - I'm not sure I can rely on much else being
+ 	 available at this point, so do the same as generic-morestack.c
+ 	 write () and abort ().  */
+-      __write (2 /* stderr.  */, err, sizeof (err));
++      write (2 /* stderr.  */, err, sizeof (err));
+       abort ();
+     }
+ };
+-- 
+2.10.2
+

package/gcc/4.9.4/0001-ARM-PR-target-68059-libgcc-should-not-use-__write-fo.patch

@@ -0,0 +1,43 @@
+From 80bc14a5249da7054b716229206b453f339b4a5e Mon Sep 17 00:00:00 2001
+From: nsz <nsz@138bc75d-0d04-0410-961f-82ee72b054a4>
+Date: Mon, 23 Nov 2015 15:17:55 +0000
+Subject: [PATCH] [ARM] PR target/68059 libgcc should not use __write for
+ printing fatal error
+
+libgcc/
+	PR target/68059
+	* config/arm/linux-atomic-64bit.c (__write): Rename to...
+	(write): ...this and fix the return type.
+
+git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@230762 138bc75d-0d04-0410-961f-82ee72b054a4
+
+Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
+---
+ libgcc/config/arm/linux-atomic-64bit.c | 4 ++--
+ 1 file changed, 2 insertions(+), 2 deletions(-)
+
+diff --git a/libgcc/config/arm/linux-atomic-64bit.c b/libgcc/config/arm/linux-atomic-64bit.c
+index 5b8c6e2..9078673 100644
+--- a/libgcc/config/arm/linux-atomic-64bit.c
++++ b/libgcc/config/arm/linux-atomic-64bit.c
+@@ -33,7 +33,7 @@ see the files COPYING3 and COPYING.RUNTIME respectively.  If not, see
+    kernels; we check for that in an init section and bail out rather
+    unceremoneously.  */
+ 
+-extern unsigned int __write (int fd, const void *buf, unsigned int count);
++extern int write (int fd, const void *buf, unsigned int count);
+ extern void abort (void);
+ 
+ /* Kernel helper for compare-and-exchange.  */
+@@ -56,7 +56,7 @@ static void __check_for_sync8_kernelhelper (void)
+ 	 for the user - I'm not sure I can rely on much else being
+ 	 available at this point, so do the same as generic-morestack.c
+ 	 write () and abort ().  */
+-      __write (2 /* stderr.  */, err, sizeof (err));
++      write (2 /* stderr.  */, err, sizeof (err));
+       abort ();
+     }
+ };
+-- 
+2.10.2
+

package/gcc/5.4.0/875-xtensa-implement-trap-pattern.patch

@@ -0,0 +1,67 @@
+From 2b4b5775554c91a63ccae4ee566db696b633652e Mon Sep 17 00:00:00 2001
+From: jcmvbkbc <jcmvbkbc@138bc75d-0d04-0410-961f-82ee72b054a4>
+Date: Wed, 10 Jun 2015 15:07:40 +0000
+Subject: [PATCH] xtensa: implement trap pattern
+
+2015-06-10  Max Filippov  <jcmvbkbc@gmail.com>
+gcc/
+	* config/xtensa/xtensa.h (TARGET_DEBUG): New definition.
+	* config/xtensa/xtensa.md (define_attr "type"): New type "trap".
+	(define_insn "trap"): New definition.
+
+Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
+
+git-svn-id: svn+ssh://gcc.gnu.org/svn/gcc/trunk@224330 138bc75d-0d04-0410-961f-82ee72b054a4
+---
+ gcc/config/xtensa/xtensa.h  |  1 +
+ gcc/config/xtensa/xtensa.md | 15 ++++++++++++++-
+ 2 files changed, 15 insertions(+), 1 deletion(-)
+
+diff --git a/gcc/config/xtensa/xtensa.h b/gcc/config/xtensa/xtensa.h
+index 615f741..fb8702c 100644
+--- a/gcc/config/xtensa/xtensa.h
++++ b/gcc/config/xtensa/xtensa.h
+@@ -67,6 +67,7 @@ extern unsigned xtensa_current_frame_size;
+ #define TARGET_THREADPTR	XCHAL_HAVE_THREADPTR
+ #define TARGET_LOOPS	        XCHAL_HAVE_LOOPS
+ #define TARGET_WINDOWED_ABI	(XSHAL_ABI == XTHAL_ABI_WINDOWED)
++#define TARGET_DEBUG		XCHAL_HAVE_DEBUG
+ 
+ #define TARGET_DEFAULT \
+   ((XCHAL_HAVE_L32R	? 0 : MASK_CONST16) |				\
+diff --git a/gcc/config/xtensa/xtensa.md b/gcc/config/xtensa/xtensa.md
+index 6d84384..a577aa3 100644
+--- a/gcc/config/xtensa/xtensa.md
++++ b/gcc/config/xtensa/xtensa.md
+@@ -86,7 +86,7 @@
+ ;; Attributes.
+ 
+ (define_attr "type"
+-  "unknown,jump,call,load,store,move,arith,multi,nop,farith,fmadd,fconv,fload,fstore,mul16,mul32,div32,mac16,rsr,wsr,entry"
++  "unknown,jump,call,load,store,move,arith,multi,nop,farith,fmadd,fconv,fload,fstore,mul16,mul32,div32,mac16,rsr,wsr,entry,trap"
+   (const_string "unknown"))
+ 
+ (define_attr "mode"
+@@ -1764,6 +1764,19 @@
+   [(set_attr "length" "0")
+    (set_attr "type" "nop")])
+ 
++(define_insn "trap"
++  [(trap_if (const_int 1) (const_int 0))]
++  ""
++{
++  if (TARGET_DEBUG)
++    return "break\t1, 15";
++  else
++    return (TARGET_DENSITY ? "ill.n" : "ill");
++}
++  [(set_attr "type"	"trap")
++   (set_attr "mode"	"none")
++   (set_attr "length"	"3")])
++
+ ;; Setting up a frame pointer is tricky for Xtensa because GCC doesn't
+ ;; know if a frame pointer is required until the reload pass, and
+ ;; because there may be an incoming argument value in the hard frame
+-- 
+2.1.4
+