This reverts commit a0aa7e0e17 and reworks
the code to fix a major and potentially catastrophic bug when the
following conditions are met:
- The user has selected a "known toolchain profile", such as a Linaro
toolchain, a Sourcery CodeBench toolchain etc. People using "custom
toolchain profile" are not affected.
- The user has enabled BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y to
indicate that the toolchain is already locally available (as
opposed to having Buildroot download and extract the toolchain)
- The user has left BR2_TOOLCHAIN_EXTERNAL_PATH empty, because his
toolchain is directly available through the PATH environment
variable. When BR2_TOOLCHAIN_EXTERNAL_PATH is non-empty, Buildroot
will do something silly (remove the toolchain contents), but that
are limited to the toolchain itself.
When such conditions are met, Buildroot will run "rm -rf /*" due to
TOOLCHAIN_EXTERNAL_INSTALL_DIR being empty.
This bug does not exist in 2016.05, and appeared in 2016.08 due to
commit a0aa7e0e17.
Commit a0aa7e0e17 removed the assignment
of TOOLCHAIN_EXTERNAL_SOURCE and TOOLCHAIN_EXTERNAL_SITE to empty, as
part of a global cleanup to remove such assignments that supposedly
had become unneeded following a fix of the package infrastructure
(75630eba22: core: do not attempt
downloads with no _VERSION set).
However, this causes TOOLCHAIN_EXTERNAL_SOURCE to be non-empty even
for BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y configuration, with the
following consequences:
- Buildroot downloads the toolchain tarball (while we're saying the
toolchain is already available). Not dramatic, but clearly buggy.
- Buildroot registers a post-extract hook that moves the toolchain
from its extract directory (output/build/toolchain-external-.../ to
its final location in host/opt/ext-toolchain/). Before doing this,
it removes everything in TOOLCHAIN_EXTERNAL_INSTALL_DIR (which
should normally be host/opt/ext-toolchain/).
Another mistake that caused the bug is commit
b731dc7bfb ("toolchain-external: make
extraction idempotent"), which introduce the dangerous call "rm -rf
$(var)/*", which can be catastrophic if by mistake $(var) is
empty. Instead, this commit should have just used rm -rf $(var) to
remove the directory instead: it would have failed without consequences
if $(var) is empty, and the directory was anyway already re-created
right after with a mkdir.
To address this problem, we:
- Revert commit a0aa7e0e17, so that
_SOURCE and _SITE are empty in the pre-installed toolchain case.
- Rework the code to ensure that similar problems will no happen in the
future, by:
- Registering the TOOLCHAIN_EXTERNAL_MOVE hook only when
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y, since moving the toolchain is
only needed when Buildroot downloaded the toolchain.
- Introduce a variable TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR which
is the path in which Buildroot installs external toolchains when it
is in charge of downloading/extracting them. Then, the
TOOLCHAIN_EXTERNAL_MOVE hook is changed to use this variable, which
is guaranteed to be non-empty.
- Replace the removal of the directory contents $(var)/* by removing
the directory itself $(var). The directory was anyway already
re-created if needed afterwards. Thanks to doing this, if $(var)
ever becomes empty, we will do "rm -rf" which will fail and abort
the build, and not the catastrophic "rm -rf /*".
Reported-by: Mason <slash.tmp@free.fr>
Cc: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b171466c44)
As reported in bug #8206, the mplayer configure script fails to detect
the availability of X11 header/library if the X.org development packages
are not installed on the build machine.
This is due to the logic used by the mplayer configure script, which
looks like this:
for I in $(echo $extra_cflags | sed s/-I//g) /usr/include ; do
if test -f "$I/X11/Xlib.h" ; then
_x11_headers="yes"
So, in other words, it:
1/ Parses the --extra-cflags option, and finds the -I options in there.
2/ Looks in /usr/include
Since $(STAGING_DIR)/usr/include is in the compiler built-in search path
for headers, we currently don't explicitly pass it in --extra-cflags, so
mplayer only looks in /usr/include. If you have X11 headers there thanks
to being installed on your build machine, everything works fine (the
rest of the build logic really uses the headers and libraries of the
cross-compiler). But if you don't have X11 headers in /usr/include, the
configure scripts assumes X11 is not available.
Since fixing the hand-written configure script of mplayer, hosted in a
Subversion repository, is beyond sanity, we simply work around this
problem by passing the appropriate -I$(STAGING_DIR)/usr/include option
in --extra-cflags.
Before this patch, during the configure script:
Checking for X11 headers presence ... no (check if the dev(el) packages are installed)
Checking for X11 ... no (check if the dev(el) packages are installed)
And then, the mplayer binary:
0x00000001 (NEEDED) Shared library: [librt.so.0]
0x00000001 (NEEDED) Shared library: [libz.so.1]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libdl.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libc.so.0]
With this patch, during the configure script:
Checking for X11 headers presence ... yes
Checking for X11 ... yes
And then, the mplayer binary:
0x00000001 (NEEDED) Shared library: [librt.so.0]
0x00000001 (NEEDED) Shared library: [libz.so.1]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libdl.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXinerama.so.1]
0x00000001 (NEEDED) Shared library: [libXxf86vm.so.1]
0x00000001 (NEEDED) Shared library: [libc.so.0]
Fixes bug #8206
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng010.
This engenering build contains different fixes done to TLS and
PIE features. Appropriate custom patches are removed as they have
been added to eng010.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/928be69f90476e6b04be3a1afd3b74112bcac0a0
As mentioned in sha2/README, by default, tinydtls uses u_intXX_t data types
for 8 bit, 32 bit, and 64 bit unsigned integer type definitions. To use
uintXX_t data types as defined by recent ANSI C standards and as included in
the inttypes.h header file, SHA2_USE_INTTYPES_H has to be define at compile
time.
[Peter: reword/simplify]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling with a toolchain targetted at ucLinux, libserialport's
configure.ac would fail at detecting the target operating system.
As a result, the Linux-specific files were not compiled in that
particular case.
While this commit does not fix any autobuider failure for this package,
it fixes autobuilder failures for other packages, for instance:
http://autobuild.buildroot.net/results/69e/69e43bc171e554cf10f2ad526cebf5e0e524538a/
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sconeserver uses pkg-config macros and uses autoreconf, so it
unconditionally needs host-pkgconf.
[Peter: drop host-pkgconf from sub options, update description]
Reported-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The android-tools code is somewhat ugly, and defines its own u64 typedef
becore including kernel headers. Unfortunately, there are specific cases
where that doesn't work properly.
The android-tools code defines u64 as "unsigned long long", which is now
correct in the kernel. However, it used to be a time where u64 was
defined as "unsigned long" on a few 64 bits architecture (at least
PowerPC64 and MIPS64). The kernel headers have introduced a
__SANE_USERSPACE_TYPES__ macro that userspace can define in order to get
the "sane" definition, i.e "unsigned long long" for u64.
Unfortunately, this __SANE_USERSPACE_TYPES__ mechanism only appeared in
3.10 on PowerPC64, and in 3.16 on MIPS64.
Since android-tools is not using the autotools, and there's no easy way
to test types with the C pre-processor, we simply add some more
Config.in dependencies. They are a bit convoluted, but that's what the
dependency really is.
In our autobuilders, this issue was only showing up with an old MIPS64
toolchain that uses 3.9 kernel headers.
Also, since the problem is limited to the "fastboot" tool, the
dependency is only added for fastboot. Both adb and adbd build fine with
this toolchain.
Fixes:
http://autobuild.buildroot.net/results/ce45c995bd6abda6487ae3a11b4f45a7b9b3f8eb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to libiio 0.7, the systemd service file that used to be
in debian/iiod.service no longer exists. The entire debian/ directory
has been removed from the upstream project:
5d49f58982
Due to this, the installation of this service file fails, and causes
build failures. To address this, we simply remove the installation of
the systemd service file.
Fixes:
http://autobuild.buildroot.net/results/ce2fc81466abd9619aa104c96234d1455de3480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4590 - mishandles about: URLs, which allows remote attackers to
bypass the Same Origin Policy via a crafted web site.
CVE-2016-4591 - mishandles the location variable, which allows remote
attackers to access the local filesystem via unspecified vectors.
CVE-2016-4622 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site, a
different vulnerability than CVE-2016-4589, CVE-2016-4623, and
CVE-2016-4624.
CVE-2016-4624 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site, a
different vulnerability than CVE-2016-4589, CVE-2016-4622, and
CVE-2016-4623.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default Blackfin processor in Buildroot isn't supported by
gcc 6.1.0, so use bf532 as default. Disable any bf6xx processors
for internal toolchain users.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With glibc 2.16, we get following build error when building jack2:
[193/247] cxx: tests/iodelay.cpp -> build/tests/iodelay.cpp.4.o
../tests/iodelay.cpp:171:43: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:171:55: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:172:44: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:172:56: error: 'UINT32_MAX' was not declared in this scope
In glibc 2.17 or older version, Header <stdint.h> defines these macros
for C++ only if explicitly requested by defining __STDC_LIMIT_MACROS.
We can't use <cstdint> since it requires C++11 standard.
Fixes:
http://autobuild.buildroot.net/results/369ce208ffea43dad75ba0a13469159b341e3bf5/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The trousers code uses getpwent_r, which is not available in musl.
Detect the availability of getpwent_r in the trousers build system, and
use it conditionally.
This broke the build of tpm-tools because linking with libtspi.so
failed.
Fixes:
http://autobuild.buildroot.net/results/830fc20c68a0653afa5567edffc2ededc4e45cc6
Runtime-tested by running tpm_version in a chroot and verifying that it
creates a "user.data" file with both the Buildroot-provided CodeSourcery
and Musl toolchains on x86_64.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was not noticed until now because:
1/ The older Blackfin toolchain doesn't have libatomic, so it didn't
provide the atomic operations that protobuf needs, so protobuf was
never built.
2/ The ARM Cortex-M toolchain is static-only, and protobuf requires
dynamic library support.
So it's only with the new Blackfin toolchain, which is based on gcc
6.x (and therefore provides libatomic) and is FDPIC-based (and therefore
has dynamic library support) that this problem appeared.
Since protobuf already has a BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS option,
we use it to add the BR2_USE_MMU dependency (which is architecture
related), which avoids the need to propagate the dependency.
Fixes:
http://autobuild.buildroot.net/results/2c1/2c151e84d7854a810465dc16869023e0ada2d586/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- move the BR2_USE_MMU dependency under
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS and remove the propagation to
reverse dependencies of protobuf, since they already depend on
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS.
- improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pixman ARM optimized code assumes that ARM instructions are
available. Unfortunately, the configure.ac checks do not detect that the
platform is Thumb-only for Cortex-M builds, so it enables the ARM
optimizations, leading to failures like:
error: /home/test/autobuild/run/instance-3/output/host/usr/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpixman-1.a(pixman-arm-simd-asm-scaled.o): Conflicting CPU architectures 13/1
When building programs linked with pixman on Thumb-only
architectures. This is due to the fact that some object files in
libpixman-1.a are built for the ARM instruction set.
To resolve this, we give better hints to the pixman configure script
about which ARM optimizations to use: the ARM SIMD optimizations need at
least a CPU that supports ARM instructions, and obviously the ARM NEON
optimizations need NEON support.
Fixes:
http://autobuild.buildroot.net/results/54bee2ce382fcd067965d30f758f9d15514478d9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add a comment above the --enable-arm-simd option, as suggested
by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default boa.conf we install specifies that boa should run under the
nobody group, but we don't have such a group in our default skeleton (and
boa doesn't add it), causing boa to fail to start:
[01/Jan/1970:00:00:10 +0000] No such group: nobody
Instead use the nogroup group, which is presumably what was meant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configure.ac has AM_GNU_GETTEXT(), which will enable i18n if a gettext
library is found. For uClibc, it is found if the gettext package has
been built, and it will add -lintl to the link flags. For musl and
glibc, it is always found, in libc itself so nothing is added to the
link flags.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matt@thewebers.ws>
Tested-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The source files in the domoticz tarballs have DOS line endings, which
don't appear when fetching the source code from Git. Therefore, a patch
generated from the Git repository doesn't apply directly on the source
code extracted from the tarball.
This commit fixes the patch so that it applies cleanly to the
tarball. Notice that the CMakeLists.txt file is not affected, only the
domoticz.cpp file uses DOS line endings.
While we're at it, we change the patch title prefix from [PATCH 1/1] to
just [PATCH].
Fixes:
http://autobuild.buildroot.net/results/a0539b3551d482411dd4bcd5c9b8c89f77e68475/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump runc to cc29e3dded8e27ba8f65738f40d251c885030a28
This version is required by Docker Engine v1.12.0.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6ad14a3687)
Bump docker-engine to the latest stable v1.12.0 from v1.12.0-rc3.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f892015d78)
domoticz.cpp currently assumes that on GNU/Linux systems header
<execinfo.h> is available. But that is not true. Since it provided by
C library and uClibc can be built without backtrace support. And in
such cases we get following build error.
domoticz-3.4834/main/domoticz.cpp:48:22: fatal error: execinfo.h: No such file or directory
#include <execinfo.h>
^
compilation terminated.
This commit adds patch for detecting presence of <execinfo.h>
and guards code accordingly.
Fixes:
http://autobuild.buildroot.net/results/393/393f839e160b51ca12ac36058718ad2f0c1b50a6/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When commit 031130a4 added the dependency on shared libs for FIT support
in uboot-tools, the dependency of the comment was added exactly as the
dependency of the symbol.
That means the comment is shown when FIT support is possible, and hidden
when it is not, while we want it the other way around...
Fix the dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reproducible build is only in its infancy; it is far from being
complete.
As such, move it to the "advanced" build sub-menu, where it belong for
now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_BINFMT_FLAT_SEP_DATA can be used to create XIP userland and works fine
for m68k. Unfortunately a lot of basic packages as pcre are not compileable
because of a CPU or hardware limitation. The reason for failing are very
big functions used in the libraries or application code.
Typical errors are:
Fatal error: Tried to convert PC relative branch to absolute jump
or
error: value -yyyyy out of range
Add kernel patch from 4ec5542679 to make
BR2_BINFMT_FLAT_ONE compiled firmware work fine.
Fixes:
http://autobuild.buildroot.net/results/20b/20b1586757450d6aad8583ad7a787a7ca11acef1/http://autobuild.buildroot.net/results/d31/d311955ada1ffcd7f69e82965c8fe33eabe488cd/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment in Config.in file about sep-data existing on m68k,
but being disabled due to build issues with numerous packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64_efi reference defconfig is targeted towards an EFI
environment but the kernel which comes with it does not enable EFI
support by default.
Booting this defconfig without kernel EFI support on a qemu virtual
machine with EFI firmware resulted in no output to tty1 or ttyS0.
Enabling EFI support in the kernel fixed this and seems saner for an EFI
reference Buildroot defconfig.
Adding CONFIG_EFI to board/pc/linux-extras.config also affects
pc_x86_64_bios_defconfig which doesn't require it, however it was
observed that the extra overhead is small and so this is preferred
rather than having a separate config file.
This was tested with qemu 2.6.0 running with kvm enabled and firmware
EFI v2.60 by EDK II. Also built and verified bios defconfig on the same
setup but with BIOS firmware instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Older toolchains that use binutils <= 2.23.2 are affected by binutils
bug #14887 (https://sourceware.org/bugzilla/show_bug.cgi?id=14887),
where:
someinstruction [ foo, something ]
is not accepted, due to the whitespace after [ and before ], causing the
following build failures for OpenBLAS:
ARM register expected -- `pld [ r1,#512 ]'
Since we don't have any mechanism to add dependencies on binutils
versions, we work around this problem by patching the code to remove the
problematic whitespaces. As there are many many instances of this in the
ARM assembly code of OpenBLAS, we use a sed expression to make this
modification rather than a patch.
Fixes:
http://autobuild.buildroot.net/results/43e50b480b4aea0fdec745d7875c85377c114cac/
[Peter: use single quotes in sed invocation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise the build fail with this error:
configure.in:53: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:95: error: possibly undefined macro: AM_CONDITIONAL
Also, there is a PKG_CHECK_MODULES used for GTK.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The instructions listed sdcard.img as output image name but
board/pc/genimage-*.cfg generate it named as disk.img instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise the configure script will probe the distro directories for it
and it may not match what we use, for example fedora uses /etc/pki
instead of /etc/ssl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version brings in several bug fixes: one of which partially
addresses Buildroot autobuilder failures for static configurations.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the SourceForge page still exists, it seems to be a bit outdated,
and there is now a much newer Github repository with recent activity, so
mention it as well in the Config.in help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building jack2:
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t capture_latency = {-1, -1};
^
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t playback_latency = {-1, -1};
^
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
This is fixed by grabbing an upstream commit,
ff1ed2c4524095055140370c1008a2d9cccc5645
Fixes:
http://autobuild.buildroot.net/results/8a8/8a8d533a0f785591fee10f1c09c9294f892ef7f7/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils-arc-2016.09-eng008 build fails sometimes.
This happens due to the following issue:
binutils configure script has CC variable that stores compiler for
target and CC_FOR_BUILD variable that stores compiler for host.
WARN_FLAGS are verified by the script to be compatible only with CC
compiler but not with CC_FOR_BUILD compiler. Despite this WARN_FLAGS
are passed to both CC and CC_FOR_BUILD compilers. This leads to
unevident errors when cross-compiling. More information you can find
in the binutils mailing list:
https://sourceware.org/ml/binutils/2016-08/msg00117.html
We are going to write a patch for bunutils that fixes the initial
issue. Current patch contains temporary workaround. It should be
deleted after real fix.
Fixes:
http://autobuild.buildroot.net/results/00455b6a8324920ad843d90ce0413451522691a8//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building logrotate:
logrotate.c: In function 'postrotateSingleLog':
logrotate.c:1784:5: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
if (!state->doRotate)
^~
logrotate.c:1787:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
if (!hasErrors && log->flags & LOG_FLAG_TMPFILENAME) {
^~
This is fixed by grabbing an upstream commit,
6a36c105587b07ad14fc937f3ee6e2eb402621a2. Once this is fixed, we get:
config.c: In function 'strndup':
config.c:87:10: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if(!s)
^
cc1: all warnings being treated as errors
make[2]: *** [config.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1: all warnings being treated as errors
make[2]: *** [logrotate.o] Error 1
This is due to logrotate providing its own implementation of
strndup(). We could fix it, but it much better to simply use the one
provided by the C library, by fixing the detection method for strndup
availability. This is done in patch
0002-Use-autoconf-checks-for-strndup-and-asprintf.patch.
Fixes:
http://autobuild.buildroot.net/results/6dc2eb22104076920d77425b1e608ef9b9e01c94/
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: replace fix for the nonnull issue with a different one.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As tinycbor uses fopencookie() which is not available with the Blackfin
ADI external toolchain (UCLIBC_HAS_GLIBC_CUSTOM_STREAMS is not enabled),
add a dependency on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX.
This avoids the following build failure:
src/open_memstream.c: In function ‘open_memstream’:
src/open_memstream.c:105: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘vtable’
src/open_memstream.c:105: error: ‘vtable’ undeclared (first use in this function)
src/open_memstream.c:105: error: (Each undeclared identifier is reported only once
src/open_memstream.c:105: error: for each function it appears in.)
src/open_memstream.c:105: error: expected expression before ‘{’ token
src/open_memstream.c:111: warning: implicit declaration of function ‘fopencookie’
src/open_memstream.c:111: warning: return makes pointer from integer without a cast
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas: improve commit message.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ustr Makefile.in (as introduced by the Debian patch we apply), is
probably not parallel-safe:
402 install: install-opt install-dbg
403
404 install-opt: install-dirs install-opt-lib install-common
405
406 install-dbg: install-dirs install-dbg-lib install-common
407
408 install-opt-lib install-dbg-lib install-common: install-dirs
[--SNIP--]
424 install-opt-lib: $(OPT_LIB_STATIC) $(OPT_LIB_SHARED) ustr.pc
425 @echo Installing files
426 install -m 644 -t $(DESTDIR)$(libdir) $(OPT_LIB_STATIC)
427 install -m 755 -t $(DESTDIR)$(libdir) $(OPT_LIB_SHARED)
428 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHARED_NAME)
429 ln -s $(OPT_LIB_SHARED) $(DESTDIR)$(libdir)/$(OPT_LIB_SHARED_NAME)
430 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV)
431 ln -s $(OPT_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV)
432 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV_BSO)
433 ln -s $(OPT_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV_BSO)
434 $(LDCONFIG) -n $(DESTDIR)$(libdir)
435 install -pm 644 -t $(DESTDIR)$(libdir)/pkgconfig ustr.pc
436
437 install-dbg-lib: $(DBG_LIB_STATIC) $(DBG_LIB_SHARED) ustr-debug.pc
438 @echo Installing files
439 install -m 644 -t $(DESTDIR)$(libdir) $(DBG_LIB_STATIC)
440 install -m 755 -t $(DESTDIR)$(libdir) $(DBG_LIB_SHARED)
441 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHARED_NAME)
442 ln -s $(DBG_LIB_SHARED) $(DESTDIR)$(libdir)/$(DBG_LIB_SHARED_NAME)
443 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV)
444 ln -s $(DBG_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV)
445 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV_BSO)
446 ln -s $(DBG_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV_BSO)
447 $(LDCONFIG) -n $(DESTDIR)$(libdir)
448 install -pm 644 -t $(DESTDIR)$(libdir)/pkgconfig ustr-debug.pc
As Thomas already noticed [0], the two interesting rules above are not
dependent one on the other, so can be run in parallel. So, while one is
doing its rm'n'ln dance, the other can be running an ldconfig, which has
the side effect of creating the missing symlinks. So, we can see this
sequence:
install-opt-lib: install-dbg-lib:
ldconfig
rm -f .../$(OPT_LIB_SHAREDEV) \
`-> symlink(..., .../$(OPT_LIB_SHAREDEV))
ln -s .../$(OPT_LIB_SHAREDEV)
In this case, ldconfig uses the opportunity-window between the rm and
the ln to create the link; so the ln does not work, as the target
already exist.
We fix that by not running ldconfig at all in Buildroot, we just pass
LDCONFIG=/bin/true .
Fixes (hopefully, since I was not even able to reproduce the failure):
http://autobuild.buildroot.org/?reason=ustr-1.0.4http://autobuild.buildroot.org/results/936/93626f55625ed7900c147bfd79ff7802366639b1/http://autobuild.buildroot.org/results/18b/18b6ec537da9e9055f58a8649c0719dc64df1bcf/
[...]
[0] http://lists.busybox.net/pipermail/buildroot/2016-May/161923.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now always have a sys/cdefs.h, so we no longer need to patch it out.
Simplify the patch by removing any hunk removing cdefs.h or the use of
__BEGIN_DECLS/__END_DECLS. However, it must be included when macros it
defines are being used.
Also, renumber patches to guarantee ordering (static patch was added
before big-endian one).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl provides neither sys/queue.h nor sys/cdefs.h. Those two headers are
however quite widely used in a lot of packages (though they should at
least not use cdefs.h which is only full of mostly-legacy macros, and
which is mostly an internal header of glibc and was never really meant to
be exposed to, and used by packages).
But we don't live in an ideal world, so a lot of packages break when
those two headers are missing.
We already took care of sys/queue.h with the netbsd-queue package. But
the need for cdefs.h is getting more and more pressing.
We rename the netbsd-queue package into musl-compat-headers, and we
make it install sys/queue.h (from NetBSD) and sys/cdefs.h (a minimalist
one we bundle in Buildroot). We can't use the cdefs.h from NetBSD
because it includes machine-dependent headers; instead we bundle a very
minimalistic one, that covers only what we need.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cpupower linux tool needs gettext, always (even without locales).
We need to disable NLS, otherwise it tries to compile the .po files.
We also need to pass -lintl, otherwise it forgets to link with it
(because, the world is glibc-only, you did not know? And glibc does not
need we link with -lintl, so why would we? Oh, yes, we also reinvented
our super intelligent one-off Makefile rather than use one of the
standard buildsystems).
Fixes#9181:
CC utils/helpers/sysfs.o
In file included from utils/helpers/amd.c:9:0: ./utils/helpers/helpers.h:13:21: fatal error: libintl.h: No such file or directory
#include <libintl.h>
^
Without NLS=false (yes, we could depend on host-gettext):
MSGFMT po/de.gmo
make[3]: msgfmt: Command not found
Without LDFLAGS=-lintl:
CC cpupower
./utils/cpupower.o: In function `main':
cpupower.c:(.text.startup+0x1a4): undefined reference to `libintl_textdomain'
./utils/idle_monitor/cpupower-monitor.o: In function `list_monitors':
cpupower-monitor.c:(.text+0x5dc): undefined reference to `libintl_gettext'
./utils/cpupower-set.o: In function `cmd_set':
cpupower-set.c:(.text+0x38): undefined reference to `libintl_textdomain'
./utils/cpupower-info.o: In function `cmd_info':
cpupower-info.c:(.text+0x20): undefined reference to `libintl_textdomain'
collect2: error: ld returned 1 exit status
Reported-by: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since [1] <package>-reconfigure target is broken.
$ make elementary-reconfigure
Applying buildroot-libtool-v2.4.4.patch using patch:
Error: duplicate filename 'buildroot-libtool-v2.4.4.patch'
Conflicting files are:
already applied: buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
to be applied : buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
When a package uses AUTORECONF, the libtool patch can be applied a
second time on the same ltmain.sh in the same directory as the
<package>-reconfigure target is called. This is not a problem since
autoreconf will overwrite the previously patched files. But with the
check introduced by [1], apply-patches.sh throw an error when the
package is reconfigured since the libtool patch is already present in
.applied_patches_list.
In addition to this, the .applied_patches_list file generated by
apply-patches.sh while patching ltmain.sh is not in the top-level
package source directory. Instead a duplicated .applied_patches_list
is generated beside the patched ltmain.sh which can be in a
subdirectory.
As noticed by Arnout Vandecappelle [2], the apply-patches.sh script
doesn't bring anything for the libtool patches.
"apply_patches.sh does the following:
* It handles directories -> not needed here.
* It handles compressed patches and tarballs -> not needed.
* It handles series files -> not needed.
* It handles errors in case of multiple patches -> not needed since
it's only one patch.
* It detects errors based on *.rej files -> not needed since it's only
a single patch so patch exit code is OK.
* It writes the patch list -> for libtool, this is quite silly because
it will be written in the directory where ltmain.sh is found, not in the
top-level directory, so you have these patch lists spread over the
source tree."
So use patch directly rather than apply-patches.
[1] 1924159814
[2] http://lists.busybox.net/pipermail/buildroot/2016-August/169810.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When available, libconfuse will use the libintl provided by the gettext
package.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: make it really an optional dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-6313: An attacker who obtains 580 bytes from the standard RNG
can trivially predict the next 20 bytes of output.
Add cryptographically secure sha256 hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-6316: Bug in the mixing functions of Libgcrypt's random number
generator. An attacker who obtains 4640 bits from the RNG can trivially
predict the next 160 bits of output.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In configure script there are some tests that are looking for
a suitable compiler. For this purpose script tries to compile
and link some C++ code that is hardcoded in the body of script.
The problem is that only linker flags ($LDFLAGS) are passed to the
compiler when the script is compiling test code. Therefore some
necessary command line options can be lost and this would lead to
errors.
This exactly happens to ARC:
1. -matomic option is lost as it compiler option,
2. test code compilation fails,
3. the script decides not to use arc-buildroot-linux-uclibc-g++,
4. scipt checks host compiler (x86_64-linux-gnu-g++ in your case),
5. package is being built for x86_64, not for ARC.
About last 2 steps - I don't know why configure script should try
to build stella for host machine. As for me an error should be
raised and a build should be stopped. But this is up to stella
developers.
Current patch adds compiler options ($CXXFLAGS) when compiling
test code in configure script.
Fixes stella build for ARC, e. g.:
http://autobuild.buildroot.net/results/c23/c23d655137b1c1825b1da69b18307c6a1d4b23b8//
[Peter: s/CPPFLAGS/CXXFLAGS/]
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With musl C library, we get following build error
integck.c:37:28: fatal error: bits/stdio_lim.h: No such file or directory
#include <bits/stdio_lim.h>
^
compilation terminated.
make[2]: *** [integck] Error 1
Header <bits/stdio_lim.h> is not available in musl C library. However
<stdio.h> has all definition that <bits/stdio_lim.h> supposed to be
providing. Moreover <bits/stdio_lim.h> shouldn't be included directly
instead we should be using <stdio.h>.
Since we already include <stdio.h> and in case of uClibc or glibc
<bits/stdio_lim.h> gets included internally, we can safely remove it.
Fixes:
http://autobuild.buildroot.net/results/175/1754861457af520480cc34d7d2d0edff2868ff66/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
QtWebkit needs gstreamer-0.10 and the 'app' plugins, so we depend on
gstreamer and select the required plugins.
We can't select gstreamer as that would cause circular dependencies in
kconfig:
package/kodi/Config.in:37:error: recursive dependency detected!
package/kodi/Config.in:37: symbol BR2_PACKAGE_KODI depends on BR2_PACKAGE_KODI_EGL_GLES
package/kodi/Config.in:16: symbol BR2_PACKAGE_KODI_EGL_GLES depends on BR2_PACKAGE_HAS_LIBEGL
package/opengl/libegl/Config.in:1: symbol BR2_PACKAGE_HAS_LIBEGL is selected by BR2_PACKAGE_MESA3D_OPENGL_EGL
package/mesa3d/Config.in:150: symbol BR2_PACKAGE_MESA3D_OPENGL_EGL is selected by BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL
package/mesa3d/Config.in:92: symbol BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL depends on BR2_PACKAGE_MESA3D
package/mesa3d/Config.in:1: symbol BR2_PACKAGE_MESA3D is selected by BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV
package/x11r7/xdriver_xf86-video-imx-viv/Config.in:1: symbol BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV depends on BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11
package/freescale-imx/imx-gpu-viv/Config.in:34: symbol BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11 is part of choice <choice>
package/freescale-imx/imx-gpu-viv/Config.in:27: choice <choice> contains symbol <choice>
package/freescale-imx/imx-gpu-viv/Config.in:27: choice <choice> contains symbol BR2_PACKAGE_FREESCALE_IMX
package/freescale-imx/Config.in:1: symbol BR2_PACKAGE_FREESCALE_IMX is selected by BR2_PACKAGE_GST_FSL_PLUGINS
package/gstreamer/gst-fsl-plugins/Config.in:8: symbol BR2_PACKAGE_GST_FSL_PLUGINS depends on BR2_PACKAGE_GSTREAMER
package/gstreamer/gstreamer/Config.in:5: symbol BR2_PACKAGE_GSTREAMER is selected by BR2_PACKAGE_QT_WEBKIT
package/qt/Config.in:464: symbol BR2_PACKAGE_QT_WEBKIT depends on BR2_PACKAGE_QT
package/qt/Config.in:5: symbol BR2_PACKAGE_QT is selected by BR2_PACKAGE_PYTHON_PYQT
package/python-pyqt/Config.in:5: symbol BR2_PACKAGE_PYTHON_PYQT depends on BR2_PACKAGE_PYTHON
package/python/Config.in:5: symbol BR2_PACKAGE_PYTHON is selected by BR2_PACKAGE_KODI
This one is fairly complicated to fix properly, so it is easier to just
depend on gstreamer.
Also rework the comment when QtWebkit is not available.
Fixes:
http://autobuild.buildroot.org/results/84d/84d338b70c8ce3f21dd202de387326f18526aa63/http://autobuild.buildroot.org/results/379/379ad4eadf5af7e1d5b977bc229d3fcaba25b4fe/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current logic to pass the --{enable,disable}-mipsfpu option is:
ifeq ($(BR2_MIPS_SOFT_FLOAT),y)
FFMPEG_CONF_OPTS += --disable-mipsfpu
else
FFMPEG_CONF_OPTS += --enable-mipsfpu
endif
In practice, this means that on MIPS soft-float, --disable-mipsfpu is
passed, and that in *all* other cases, --enable-mipsfpu is passed,
including if we are *not* targetting the MIPS architecture.
Even though this doesn't seem to cause any problem, it is a bit weird to
see --enable-mipsfpu when you're building ffmpeg for a non-MIPS
architecture, so we better fix this by enclosing the MIPS-related
options in a MIPS condition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_ARM_CPU_HAS_NEON=y, we pass --enable-neon. However, when
BR2_ARM_CPU_HAS_NEON is disabled, we don't pass anything. This generally
works fine, but turned out to integrate NEON code in ARMv7-M
builds (since it's ARMv7, ffmpeg assumed it should enable NEON code).
Even though ffmpeg is now disabled for ARMv7-M, it still makes sense to
be explicit, and disable NEON support when the CPU doesn't have it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add security related bugfix to fix CVE-2016-4429 from
GNU libc project.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng008.
Main updates were made for gcc. It was switched to GCC 6 and to
OSABI v4.
Besides this patch fixes buildroot ARC failures connected to
"crtbeginT.o" object file missing. This issue lead to two main errors:
1) "crtbeginT.o: No such file or directory", e. g. bootutils-1.0.0.
No comments are required here I hope.
2) Errors like "compiler cannot create executables", e.g.:
a) host-gcc-final-arc-2016.09-eng007 static build,
b) aespipe-2.4c.
That was caused because the test to determine if compiler is able to
create executables was failing due to missing "crtbeginT.o" file.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT selects BR2_PACKAGE_DTC, but forgets
to depends on !BR2_STATIC_LIBS like BR2_PACKAGE_DTC does.
Fixes the following kconfig warning:
arning: (BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT && BR2_PACKAGE_KVMTOOL && BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT) selects BR2_PACKAGE_DTC which has unmet direct dependencies (!BR2_STATIC_LIBS)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 0d8158fc61. Thanks to
a fix in libaio, blktrace now builds fine on PowerPC, so there's no
reason to disable it anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both the blktrace and gadgetfs-test packages were failing to build on
PowerPC due to the mysterious:
hidden symbol `_rest32gpr_30_x' in libgcc.a(e500crtresx32gpr.o) is referenced by DSO
Due to this error, we disabled blktrace on PowerPC in commit
0d8158fc61. However, gadgetfs-test
continued to fail with the same error. As Romain Naour pointed out, the
problem seems in fact to come from a common dependency of blktrace and
gadgetfs-test: libaio. As Romain investigated, the problem started
appearing after the last bump of libaio, from version 0.3.109 to
0.3.110.
A quick bisect through the libaio changes between 0.3.109 and 0.3.110
has revealed that the problematic change is one in the libaio build
system, which now obeys to the CFLAGS provided in the environment,
rather than overriding them. So the CFLAGS provided by Buildroot cause
this problem. It turns out that the problematic CFLAGS is -Os, which is
indeed known to cause issues on PowerPC in some corner cases.
Even though it would probably be a better long-term solution to switch
to -O2 by default, and mark -Os as not available on PowerPC, it is a too
radical change so close to 2016.08. So we simply adjust the libaio
package so that it uses -O2 instead of -Os.
Fixes:
http://autobuild.buildroot.net/results/5e6cc4c432ce6c964ac285026978ad14d9eae97c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the ffmpeg code, libavutil/arm/asm.S makes some assumption about the
ARM architecture for which the code is built. Only ARMv4, ARMv5, ARMv6
and ARMv7-A is supported. Due to this, object files built out of
ARM-optimized assembly code have the wrong architecture information,
causing a failure at link time.
Adding ARMv7-M support would be possible, but it doesn't exist yet in
ffmpeg, and it's pretty unlikely that ffmpeg will ever be needed on an
ARMv7-M platform, so this commit takes the simple approach of disabling
ffmpeg for ARMv7-M.
Fixes:
http://autobuild.buildroot.net/results/ca4c67b093afd6f14349fcdc87b02e0480172e8c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing build issue related to MS_DIRSYNC and MS_RELATIME, we get
following build error with blackfin external toolchain.
fstest_monitor.c: In function 'main':
fstest_monitor.c:237: warning: implicit declaration of function 'fork'
/tmp/ccCzZIuW.o: In function 'main':
/home/rahul.bedarkar/buildroot/output/build/mtd-1.5.2/tests/fs-tests/utils/fstest_monitor.c:237: undefined reference to '_fork'
collect2: ld returned 1 exit status
make[2]: *** [fstest_monitor] Error 1
Since it uses fork(), add dependency on MMU support for integck.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libical requires time zone information in order to make use of time
zone functions (otherwise, segfaults occur when applications call
the time zone functions). This patch:
1. forces the system to build time zone info
2. ensures libical does not build its own time zone info (this is
the default behaviour, but the flag is added in case libical's
default changes in the future).
Signed-off-by: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Manuel in bug #9161, the commit
19b503b0d2 that bumped the X.org server
from 1.18.3 to 1.18.4 forgot to also rename the patch directory, making
the existing patch orphan, while it is still needed. This commit
therefore renames the 1.18.3 directory to 1.18.4.
Moreover, this patch is also needed for the 1.17.x X.org server series
which has been added recently, so this commit also adds the patch to a
new 1.17.4 directory.
Fixes bug #9161.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed with Waldemar, the C++ support for Blackfin is currently
broken, and we don't have a fix in sight for the 2016.08
release. Therefore, this commit disables C++ support entirely on the
Blackfin architecture in the internal toolchain backend.
This will avoid a significant number of Blackfin build failures, that
occur when building C++ packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When readline is static library, we need to link against ncurses,
it is because, dependent library's symbols are not resolved when
static library is built. Those symbols are resolved when binary tries
to link with static library.
We can't pass linker flags for ncurses by setting LIBS environment
variable via <PKG>_CONF_ENV because it looks like build system is not
taking that into account and even though it would have been, order of
linking is important.
We can't also pass linker flags for ncurses via --with-readline-libs
conf options because it causes lftp_LIB_READLINE macro to take readline
headers from host machine if available. To use --with-readline-libs
we need to set --with-readline=yes and --with-readline-inc to include
dir. But when --with-readline=yes, readline_prefix is computed based
on if headers can be found in /usr/local or /usr. If readline is
installed on host machine, then configure fails since we are using
headers for host machine. If headers are not found in /usr/local or /usr
then only path specified --with-readline-inc is taken into account.
So specifying linker flags for ncurses via --with-readline-libs will
not work in all cases.
So it looks like, updating linker flags directly is only option to fix
static link issue against readline.
Fixes:
http://autobuild.buildroot.net/results/ae9/ae93bd1b4f6e1ed8f386830d4a51f00d9466f267/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: update autoreconf comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When installation prefix is specified in "--with-readline" config
option, lftp's build systems figures out include dir and linker flags.
So don't specify --with-readline-{inc,libs} options which are anyways
get ignored by build system.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we limit installing zoneinfo to non-musl toolchain, by lack
of knowledge on how it would work on musl.
Turns out that musl uses the same zoneinfo format as glibc does.
Make it possible to install the TZ info whatever the C library; for
musl, use tzdata as for glibc.
Thanks Rich! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes several build issues of OpenBLAS on ARM:
- The first one occured on ARMv5 platforms, when the ARMV5 OpenBLAS
architecture is used. In this case, OpenBLAS build system forces
-march=armv5, which may not be correct for certain toolchains. As an
example, the Sourcery CodeBench toolchain has an ARMv4 and an ARMv5
sysroot. The ARMv5 sysroot is actually an armv5te sysroot, so when
OpenBLAS forces -march=armv5, gcc thinks it should use the ARMv4
sysroot, causing build failures.
To address this, a patch to completely remove the -march ARM CFLAGS
is added to OpenBLAS.
Fixes:
http://autobuild.buildroot.net/results/991497b12b70f948169e5ad99eebd0fe7f6209a2/
- The second one occured on ARMv7 platforms, when the ARMV7 OpenBLAS
architecture is used. The OpenBLAS code expects an EABIhf build, so a
dependency is added for EABIhf for both ARMv6 and ARMv7.
Fixes:
http://autobuild.buildroot.net/results/0ba0bee48a83367fcefab827e8eaa72f0c8fe90b/
- Once the previous ARMv7 problem has been fixed, it turns out that the
ARMv7 specific code in OpenBLAS contains VFPv3 specific
code. Therefore, the user *must* have choosen either VFPv3 or VFPv4,
or the code will not build. VFPv3-D16/VFPv4-D16 are not sufficient,
as more than 16 registers are used by the OpenBLAS code.
To address this, the ARMV7 platform of OpenBLAS is restricted to the
proper VFPv3/VFPv4 selection, and the ARMV6 platform is restricted to
the proper VFPv2 selection.
This problem was not visible in the autobuilders, as it was hidden by
the previous one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While musl and glibc provide the ucontext structure definition on all
architectures they support, it is not the case of uClibc. We have been
excluding more and more architectures over time, but this isn't really
nice as we continuously need to add more. Latest example: the fact that
ucontext on ARM is only available on ARM platforms that support the ARM
instruction set (i.e not on the Thumb-2 only Cortex-M platforms).
Therefore, we introduce a BR2_PACKAGE_LIBSIGSEGV_ARCH_SUPPORTS variable,
which:
- is set to 'y' for musl and glibc
- is set to 'y' for uClibc for the only architectures that are known to
provide ucontext (those are the ones that select ARCH_HAS_UCONTEXT in
uClibc.
Note that we remove the comment, as it would become a way too
complicated comment, and we usually don't add comment for such
complicated situations (see libunwind for a similar example).
Fixes:
http://autobuild.buildroot.net/results/b1e40b3ec64cd98b535d83e89e5780c46680e095/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dante configure script has some logic to remove the -g flag from
CFLAGS, but this logic is flawed and also removed -g in
-mfloat-gprs=double, turning it into the invalid -mfloatprs=double,
causing a build failure.
This commit adds a patch that gets rid of this -g removal logic, since
it is in fact unnecessary.
Fixes:
http://autobuild.buildroot.net/results/313370bf05efe7fd87c281a97ecb6e06531a87ed/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The procps-ng package currently fails to build on BR2_STATIC_LIBS=y
configurations. Indeed, by default NUMA support is enabled, and it
requires dlopen(). As hinted by the configure script, passing
--disable-numa allows to disable NUMA support.
However, once this is done, another issue pops up: dlopen() is also used
by the SELinux support. But even when SELinux support is disabled, the
procps-ng code incorrectly includes <dlfcn.h>. This is addressed by the
addition of a patch.
Fixes:
http://autobuild.buildroot.net/results/b385bf435085728aece6323a5006ba9fa6631744/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The webrtc-audio-processing configure script assumes that if the
host_cpu part of the tuple is "arm", then ARM instructions are
available. This is obviously incorrect for ARM Cortex-M platforms, which
only support the Thumb-2 instruction set.
In order to address this, we add a patch,
0001-configure.ac-fix-architecture-detection.patch, which changes how
webrtc-audio-processing detects the architecture: instead of relying on
the host_cpu part of the tuple, it relies on the built-in definitions of
the compiler.
Not only it fixes the Cortex-M detection, but it also enables ARMv7
optimizations on ARMv7-A: until now they were only enabled when the
host_cpu part of the tuple was armv7, which is never the case in
Buildroot.
However, once this issue is fixed for Cortex-M, the build nonetheless
fails later due to the usage of NPTL-only functions. So we change the
thread dependency to a NPTL dependency.
Fixes:
http://autobuild.buildroot.net/results/4933082cd7cc5781404c77ccef5c2b9333c5f714/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size-stats script fails when the usb_modeswitch_data is enabled,
because this package installs files that contain commas in their
name. However, the size-stats script also uses comma as a separator for
its CSV files, causing a "ValueError: too many values to unpack" in:
pkg, fpath = l.split(",")
Fix this by splitting only the two fields that need to be split.
The bug was reported by Matthias <porto.rio@gmx.net>, who also suggested
a fix.
Fixes bug #9136.
Reported-by: Matthias <porto.rio@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ALSA > 1.1.x are not determined correctly when configuring the library.
A patch, identical to the one used for Qt5, is added to the qt package
to solve this problem.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When uClibc-ng 1.0.17 was released, there was a regression when building
Thumb2-only for a CPU that is capable of running in arm mode (e.g. an
armv7a cpu).
We hastily added a patch to revert the upstream commit, as a stop-gap
measure, waiting for the actual fix.
That actual fix is there, now. :-)
Drop our revert-patch, and add the upstream patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iproute2 believes that it needs to link with libpthread for its arpd
binary, because "some db implementations require thread". Therefore, our
iproute2.mk explicitly disables the build of arpd when thread support is
not available.
However, the sed expression it uses no longer works. The Makefile used
to look like:
TARGETS = foo baz baz arpd foobar
so replacing " arpd " with a space was working fine. However, the
Makefile got changed in iproute2 to:
ifeq (... berkeleydb available ...)
TARGETS += arpd
endif
i.e, with no space at the end of the line. This made our sed expression
ineffective, causing build issues with no-thread configurations since
arpd was no longer disabled.
To address this, instead of sed-ing the Makefile, we overwrite the
berkeleydb detection of iproute2, by writing to the "Config" file, like
we're doing for other aspects of the package.
Fixes:
http://autobuild.buildroot.net/results/03a37a2372a4c2e438a073e015c49d9e554b86b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Traditionally, Buildroot has a default of enabling thread
support. However, with the current construct of the thread choice in the
uclibc package, the m68k and microblaze architecture end up with no
thread support as the default.
In order to avoid having to explicit a more complicated "default" value
for the choice, we take a simple approach: we order the 3 possible
choices by order of "preference", since Kconfig selects the first
selectable option in a choice by default.
So, NPTL is first and is the default when available. Then comes
linuxthreads which only gets selected as the default when NPTL is
available. None is offered as a last choice (in the current
implementation, it is never the default, since all architectures can
have thread support, either through NPTL or linuxthreads).
[Thomas: reworked according to Yann's comment that we could rely on the
Kconfig behavior that selects the first available choice option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_BLKTRACE option "depends on
BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS", but this architecture dependency was
not replicated in the Config.in comment. This commit fixes this
inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running ntp it randomly aborts at ntp-4.2.8p8/libntp/recvbuff.c:326
which seems to be a debugging feature. This patch just disables
debugging, it does not fix the root cause of the problem.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since enlightenment 0.20 uuid.h is always included in e_pixmap.c but
libuuid is checked at configure time only when wayland support is
enabled.
Include uuid.h must guarded by HAVE_WAYLAND.
Fixes:
CC src/bin/src_bin_enlightenment-e_pixmap.o
src/bin/e_pixmap.c:16:18: fatal error: uuid.h: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HLS plugin can be built with nettle or libgcrypt or openssl
cryptographic backend. But current dependency on gnutls is incorrect.
It has been working so far because gnutls depends on nettle.
gst-plugins-bad's build system for HLS allows user to choose which
cryptographic backend to use. If that is not specified, it internally
checks for nettle or libgcrypt or openssl in order. If none of the
cryptographic backend is available, HLS plugin gets disabled internally.
Select cryptographic backend according to which cryptographic packages
are available. If both libgcrypt or openssl are not available, choose
nettle by default.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
operf_utils.h defines rmb() for a limited number of architectures, so
add this list to BR2_PACKAGE_OPROFILE_ARCH_SUPPORTS to disable any new
or unsupported architectures.
Doing so, this disable oprofile for m68k which lack of memory barrier
operations.
Remove nios2 dependency since it's not supported by oprofile even if
binutils could be built for nios2.
Fixes:
http://autobuild.buildroot.net/results/1cc761d8a5715d0a2c6eaacfde7e44b225da1b36
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: remove BR2_sh64, use BR2_sh instead of BR2_sh4.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imx6ul has currently an issue on kernel 4.7 that causes a stall when running
the "reboot" command.
This issue has been reported in the linux-arm-kernel mailing list, but we
don't have a proper fix at the moment.
This problem is not seen when SMP is disabled, so let's disable it for now
until a proper fix becomes available.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following reports from me of build failures of the GDB simulator for the
Blackfin architecture, Waldemar cooked a
patch (0005-fix-sim-compile.patch) that removes the typedef of SIM_CPU,
because there was a redefinition of this typedef for Blackfin. This was
not causing an issue with recent compilers as redefining the same
typedef is valid with recent compilers, but was causing build failures
with gcc 4.4.x.
However, by removing the common definition of SIM_CPU, this patch broke
the build of the GDB simulator on other architectures, which did not had
an architecture-specific redefinition of SIM_CPU (unlike Blackfin).
The crux of the problem is in a commit from Mike Frysinger, that tries
to refactor the SIM_CPU definition into a common one. Except that it
leaves a redefinition of it for Blackfin. Removing this second
definition however doesn't easily work, due to include ordering
issues. The easiest solution is to simply revert the patch from Mike
Frysinger. This allows to fix the build for all architectures and all
compiler versions.
Fixes:
http://autobuild.buildroot.net/results/3b82c44ee853fab0e0c63881f0705bb659412917/http://autobuild.buildroot.net/results/dafbb93ab38a4285ce42436219d552cceb14828b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the kernel headers in the toolchain don't provide __NR_getrandom,
eudev has a predefined set of values. However, the provided value for
ARM64 is incorrect, and causes a runtime problem on this architecture
when old kernel headers (not providing __NR_getrandom) are used.
This commit adds a patch to eudev to fix this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Kevin Hilman <khilman@baylibre.com>
Two patches are removed, as they have been upstreamed:
- 130-fix_build_with_gcc-6.patch (svn commit 233721, Git commit
8c3fa311caa86f61b4e28d1563d1110b44340fb2)
- 920-libgcc-remove-unistd-header.patch (svn commit 226092, Git commit
e940d7953f06af11d09229a29ecbcc1ba25b378d)
All other patches have simply been refreshed, with no manual edit
needed.
A build+runtime test has been done with an ARM, Cortex-A8, EABIhf, musl
configuration, booted under Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of shellinabox with the musl C library,
which requires two changes:
- A patch to include <sys/ttydefaults.h>, which is needed to get the
definitions of TTYDEF_*
- A hack to workaround what seems to be a problem in musl itself (musl
does #define utmp utmpx, which causes some symbol conflicts down the
road). Since anyway the utmpx implementation is just a set of stubs
in musl, we simply make shellinabox believe that <utmpx.h> is not
available by passing the appropriate variable. The musl issue has
been reported at http://www.openwall.com/lists/musl/2016/08/04/8.
Fixes:
http://autobuild.buildroot.net/results/1847cab964957da3c9bf4911a5ad3602b3c82431/
Signed-off-by: Olivier Singla <olivier.singla@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5ca9b7cf66. Installing
dtc headers in $(HOST_DIR) causes some build failures of
host-uboot-tools due to a conflicting libfdt.h header.
The possible solution to solve this problem, based on -isystem, has been
reverted has it was causing too many issues that we didn't want to solve
so close to cutting 2016.08-rc1.
Since the headers of libfdt for the host are currently not needed for
any package in the Buildroot tree, it is easier and safer to just revert
this patch.
Fixes:
http://autobuild.buildroot.net/results/9fba77f4080bf6bc26e341f3f383cdba26c0e14f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The main benefit of using make foreach loops is that they will abort
if one of the iteration of the loop fails. The current for loops will
continue, and only report a failure if the last iteration was a
failure, but will silently ignore other errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This long list of commands to copy the terminfo files from staging to
target is really silly and can be factorized using a
NCURSES_TERMINFO_FILES variable, which is then iterated through.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also adding the '-m4' device tree blobs which allow to disable the
peripherals that are used by the Cortex-M4.
The 6x_bootscript is already setup to load the '-m4' dtb if m4enabled
u-boot variable is set to 1.
The FreeRTOS BSP for both Nitrogen6SX and Nitrogen7 can be found here:
https://github.com/boundarydevices/freertos-boundary
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
* imxv4l2videosrc:
* Stricter checks for video device capabilities
* Add support for more video formats like 8/16-bit grayscale
* pxp: Fix incorrect return code which broke blitter with GStreamer 1.8
* blitter:
* Improvements in error logging
* Fixes for RGBx framebuffer format detection
* Fix for subtle tearing problem by implementing triple buffering
* audio:
* Replace objdump-based scan during build configuration
Codec filenames are instead moved to the C code; the libdir
path of the libfslaudiocodec.pc file is used to know where on
the target the files are placed
* Explicitely add the libfslaudiocodec.pc libdir to the MP3 encoder
Fixes build errors in buildroot
* Minor logging fixes
* misc:
* Proper check for region copies in phys_mem_meta
* Add missing G_END_DECLS lines in headers
Tested with the following commands on i.MX6Q (IPU):
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxeglvivsink
Tested with the following commands on i.MX7 (PXP):
# gst-launch-1.0 imxv4l2videosrc device=/dev/video1 ! imxpxpvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, all the libraries are installed under /usr/lib/imx-mm
which causes problems at runtime.
[Peter: drop -mindepth/-maxdepth, add comment explaining why this is done]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, all the libraries are installed under /usr/lib/imx-mm
which causes problems at runtime.
The hooks are inspired from the mechanism used in the Yocto recipe:
https://github.com/Freescale/meta-fsl-arm/blob/krogoth/recipes-multimedia/imx-codec/imx-codec.inc
Tested with the following commands:
# gst-launch-0.10 audiotestsrc ! mfw_mp3encoder ! fakesink
# gst-launch-1.0 audiotestsrc ! imxmp3audioenc ! fakesink
[Peter: drop -mindepth/-maxdepth, add comment explaining why this is done]
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The options to purge locales and to generate locale data are currently
located in the toolchain menu. However, these options are not really
related to the toolchain per-se, they are more system-level
configuration options, much like the timezone selection option we
already have in the "System configuration" menu.
Therefore, it makes more sense to have the locale-related options in
the "System configuration" menu as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current list of locales to keep by default is "C en_US de fr". It
doesn't make much sense to keep "de" and "fr" more than any other
language. So let's keep only the "C" and "en_US" locales by default,
and leave it to the user to specify other locales to keep if needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current default is to keep all locales installed in
/usr/share/locale/. However, in practice, those locales take up a
significant amount of space, and most users do not need
locales. Therefore, it makes more sense to default to purging locales,
in order to keep only a few useful ones rather than keeping them all.
It helps in providing a small filesystem size by default, and still
allows advanced users who really need locales to tune their
configuration.
As an example, a very basic system with just util-linux enabled (not
even Busybox) weights 11 MB, including 6.4 MB of locales. With this new
default, the generated system is only 4.2 MB.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
- bump u-boot version to 2016.07
- "snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.7
- set up host linux headers to 4.7
Also we delete "snps_hs38_vdk_defconfig" as we doesn't support
uni-processor HS38 configuration for vdk any longer.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The output of "/etc/init.d/S40network start/stop" was lacking a
newline due to the usage of printf. Fix it by echoing the status, like
we do in other init scripts.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cairo package fails to build on some architectures:
BR2_TOOLCHAIN_HAS_LIBATOMIC is enabled, but libatomic is in fact not
available.
This happens because the gcc logic in libatomic/configure.tgt does not
recognize "uclinux" as a valid OS part of the target tuple, and
therefore it does not build libatomic.
The "uclinux" part of the tuple is used by Buildroot when
BR2_BINFMT_FLAT=y, so we make BR2_TOOLCHAIN_HAS_LIBATOMIC enabled only
if !BR2_BINFMT_FLAT.
It is worth mentioning that support for the uclinux tuple could most
likely very easily be added to gcc: it could rely on the generic
"posix" implementation of libatomic, which uses pthread locks,
available on all architectures where thread support is available.
Fixes:
[arm] http://autobuild.buildroot.net/results/3d8dc45e41a043d2c2c26bfb26c3617499fbe671
[m68k] http://autobuild.buildroot.net/results/318e01406e3e92eb589ee5b2231c671a4dbb6da4
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust dependency after analysis of the gcc code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boost-context module contains ARM assembly code, which uses ARM
instructions. Therefore, on Thumb-2 only platforms (such as Cortex-M),
the following build error occurs:
libs/context/src/asm/make_arm_aapcs_elf_gas.S: Assembler messages:
libs/context/src/asm/make_arm_aapcs_elf_gas.S:33: Error: unshifted register required -- `bic a1,a1,#15'
libs/context/src/asm/make_arm_aapcs_elf_gas.S:42: Error: immediate value out of range
To avoid this error, we make the boost-context module depend on
BR2_ARM_CPU_HAS_ARM.
Fixes:
http://autobuild.buildroot.net/results/8f6770b59a343b9f710e9363b43227ee9f026660
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: use BR2_ARM_CPU_HAS_ARM instead of a dependency on
!BR2_ARM_CPU_ARMV7M.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this new version, the generation of atom-glue fails with the
following error:
Making all in src/lib
make[3]: Entering directory '/mnt/data/src/sfl/zodiac/buildroot/output/build/lldpd-0.9.4/src/lib'
GEN atom-glue.c
arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
compilation terminated.
arm-buildroot-linux-uclibcgnueabi-cpp.br_real: fatal error: too many input files
compilation terminated.
make[3]: *** [Makefile:899: atom-glue.c] Error 1
There is an upstream patch pushed after 0.9.4 which fixes the
corresponding Makefile.am, included in this commit.
Note that since the provided tarball ships the related Makefile.in file,
we need to tell Buildroot to autoreconfigure the package.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
[Thomas: add comment about AUTORECONF=YES in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream i2c-tools executables are installed to /usr/sbin by default.
Make buildroot match this behavior.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before changing the install directory of i2c-tools to /usr/sbin/ make
sure busybox is built first (if selected) in order to ensure that the
symlinks to the busybox-provided versions are overwritten by the
i2c-tools' install commands.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has this patch a while and other projects are using
it already. So better switch to this.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of version 1.25.0 busybox by default includes a nearly complete
implementation of i2c-tools. Hide the upstream version unless the
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS option is selected.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng007 tag plus a
couple of fixes on top of it that will all make its way in the
next engineering build.
We hope this patch will cure most buildroot ARC failures as it
contains important fixes:
1) PIE fix. We have added PIE support to ARC toolchain at last.
So that should prevent breakage of many packages. As ARC now
supports PIE we remove ARC from BR2_TOOLCHAIN_SUPPORTS_PIE
exclusion in toolchain/Config.in file.
2) Assembler fix. This patch also have changes that fixes frequent
assembler failures, e.g.:
http://autobuild.buildroot.net/results/543/5430b902d900943a34c1888e7e410bd5df367bc2//
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: remove uClibc PIE patch, since we have bumped uClibc in the
mean time, to a version that contains the PIE fix for ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Security fixes and fixes for bugs introduced in 1.4.40.
Drop 0002-autobuild-clock_gettime-lrt-with-glibc-2.17.patch, which is now
upstream.
Due to the patch removal, autoreconf is no longer needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: remove autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many cleanups and ARC improvements including PIE support.
Patches included upstream and removed.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
imx6ulpico has a BCM4339 Wifi chip. Add Wifi support by default
to allow a better customer experience.
The dts patch has already been sent to the linux-arm-kernel list
and we can remove it once it reaches a mainline kernel (in
version 4.9 probably).
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing the <bits/local_lim.h> issue by using <limits.h>, the
build still fail with udefined __WORDSIZE.
Adding <sys/user.h> to define __WORDSIZE reveal that xenomai use
<error.h> which is not provided by musl.
The discussion on the musl mailing list [1] about glibc error reporting
functions concluded to not add this support in the C library.
For now, disable Xenomai user space support for musl toolchains since
it require several patches to build correctly and needs to remove each
glibc error reporting functions.
Users interested in musl support for Xenomai can work with upstream to
fix these issues and revert this patch.
[1] http://www.openwall.com/lists/musl/2014/06/29/8
Fixes:
http://autobuild.buildroot.net/results/e36/e36a21c1df33bdd3fbc61d516a3e8f7c5f7c41af
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS to hold the
architectures than can build and use Xenomai on the target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide a more complete set of instructions on how to get Wifi
working on the warpboard.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
grub2 assumes the strip command will generate output and the output should
always be stripped - so, just use the $(TARGET_CROSS)strip to make sure that
the build succeeds regardless of the buildroot strip configuration.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iozone requires thread support since commit
06b53255cf, so having code to handle the
non-threaded case in the .mk file is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The autofs configure script verifies on the build system if /proc is
provided by a Linux system. This might fail if /proc is not mounted,
but does ont mean that procfs will not be available in the target.
Therefore, this commit adds a patch improving the AF_LINUX_PROCFS
autoconf macro to allow passing an autoconf cache variable. autofs.mk
then uses that to force the fact that /proc will be available on the
target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline. It includes proper ps7_init_gpl.c/h
in it, so builds working SPL without any manual intervention.
BR2_TARGET_UBOOT_BOARD_NAME should be changed to zynq_zc706 since
U-Boot now has separate defconfig files for ZC702 and ZC706 boards.
BR2_TARGET_UBOOT_SPL_NAME should be changed to spl/boot.bin since
the Zynq image support for the mkimage tool was upstreamed and it
now generates boot.bin under spl/ directory.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the latest release tag in the Xilinx repository, based on
U-Boot v2016.01 in the mainline.
Commit 46d6a561be ("zedboard: Generate BOOT.BIN automatically")
switched from the Xilinx GitHub repository to the U-Boot mainline,
but this commit gets it back to the Xilinx GitHub repository for the
following reasons:
- This defconfig still relies on the Xilinx's local repository for
the kernel. The vendor does the best test for the combination of
U-Boot and the kernel with the same release tag (xilinx-v2016.2
in this case).
- At the time of commit 46d6a561be, the u-boot-xlnx still needed
manual copy of ps7_init(_gpl).c/h in order to build a working SPL
image. So, the mainline U-Boot had advantage in that point of
time. However, the improvement in the mainline U-Boot was merged
into the u-boot-xlnx at the xilinx-v2015.3 release. Now, the
mainline and the u-boot-xlnx are even in this point of view.
- The mainline U-Boot defaults to boot FIT, so something must be
done; either patch environments around with a local patch to
switch to uImage booting (current solution), or build an FIT
with a post build script (chromebook snow does this). On the
other hand, the Xilinx repository defaults to uImage booting,
so it is straightforward, and needs no addition care.
This commit does:
- Switch to the Xilinx custom git repository, and stick to the
xilinx-v2016.2 tag.
- Delete the local patch board/avnet/zedboard/uboot/0001...
since the Xilinx custom repository can boot uImage by default.
- Enable BR2_TARGET_UBOOT_FORMAT_IMG instead of ..._FORMAT_DTB_IMG
since all the Zynq boards in U-Boot enable CONFIG_OF_EMBED.
- Replace BR2_TARGET_UBOOT_ZYNQ_IMAGE with BR2_TARGET_UBOOT_SPL_NAME
since U-Boot can natively generate the Zynq boot image now. The
Zynq image support for mkimage tool was upstreamed at v2016.01
(so xilinx-v2016.1 as well), so no additional tool is needed
any more.
- Update readme.txt
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SSDP managing daemon.
Designed to work with miniupnpc, miniupnpd, minidlna, etc.
http://miniupnp.free.fr/
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- remove patch for _GNU_SOURCE, pass it from the .mk file instead
- add dependency on BR2_USE_MMU, fork() is used.
- rename $IF variable in init script/systemd unit file to $IFACE, for
clarity.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GUPnP Tools are free replacements of Intel UPnP tools that use
GUPnP. They provides client and server side tools which enable
one to easily test and debug one's UPnP devices and control
points.
http://www.gupnp.org/
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- use "depends on BR2_PACKAGE_LIBGTK3" instead of a select, and
simplify the Config.in comments consequently.
- move from "Development tools" to "Networking applications"
- license is GPLv2+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GtkSourceView is a portable C library that extends the
standard GTK+ framework for multiline text editing with
support for configurable syntax highlighting, unlimited
undo/redo, search and replace, a completion framework,
printing and other features typical of a source code editor.
https://projects.gnome.org/gtksourceview
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- simplify the Config.in by using "depends on BR2_PACKAGE_LIBGTK3"
instead of a select. It is pretty obvious that Gtk is needed if you
want to use gtksourceview.
- license is LGPLv2.1+, not LGPLv2+.
- change location in package/Config.in, gtksourceview is a library,
it should not go under "Development tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version B.02.17 was found to be unstable on recent HW.
Status of the patches:
- The patch allowing to add extra values to the LIBS variable has
been refreshed, and changed to a Git formatted patch.
- The two patches from git.alpinelinux.org were needed for lshw to
build with the musl C library, but they have been merged upstream
(commit cd690bff1516b40fecd5ec4a7f6619e5bffc3cf0).
- The last patch was taken from upstream, and therefore already
merged, and now part of B.02.18.
This patch was tested with kernel 4.4.16.
Signed-off-by: Hubert Sokolowski <hubert.sokolowski@intel.com>
[Thomas:
- better explanation about patches
- re-add patch from Gustavo about LIBS, since it is really needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iperf2 is a fork of the original unmaintained iperf project, that
continues the development of the iperf 2.x series. Update homepage
link, and download location.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Thomas:
- change the download location to use downloads.sourceforge.net
- turn the patch into a Git-formatted one, since upstream uses Git as
its version control system
- as noticed by Khem Raj, a C99 compiler is needed for the bool type,
so added AC_PROG_CC_C99 to configure.ac, and consequently added
IPERF_AUTORECONF = YES.
- removed two <pkg>_CONF_ENV variables related to the bool type, they
were added by an older commit
e13ac0ec87 back when we had a
config.cache shared between packages (which is no longer the case
today)]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selecting the driver CONFIG_BRCMFMAC as built-in causes some probe issues
as we cannot guarantee that the brcmfmac driver will be probed after the
rootfs has been mounted. The brcmfmac driver retrieves the firmware and
nvram file from the rootfs, so the rootfs should be mounted first.
To avoid such issues let the CONFIG_BRCMFMAC be built as module, which is
the original option in imx_v6_v7_defconfig.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
squashfs-tools development has been moved to git.kernel.org from
Sourceforge.
The hash was selected to fix a threading issue observed when
creating images on a build machine with at least 64 cores.
(Fixes random corrupted images that would fail to boot)
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: use https:// instead of git://.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
KMS++ is a suite of library and test tools to interact with KMS drivers in
the linux kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
[Thomas:
- rename prompt to kms++, suggested by Yann E. Morin
- fixup the thread dependency comment
- remove the mention of the python wrapper in the Config.in help
text, since they are not installed
- fix the Config.in comment to mention the C++ and gcc >= 4.8
dependencies
- use = instead of += when appropriate
- use a loop to install the test programs
- use a loop to install the libraries
- add installation to staging as well, both the libraries and header
files
- add missing dependency on host-pkgconf
- add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wavemon is an ncurse-based wireless device monitoring application allowing to
watch signal and noise levels, packet statistics, device configuration and
network parameters of wireless network hardware.
[Peter: needs host-pkgconf, explain CC override]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have introduced the support for ARM no-MMU in Buildroot,
we need to update the dependencies of the musl external toolchain. It
supports only MMU-capable ARM cores, so it must depend on BR2_USE_MMU,
at least for the ARM platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARM big-endian is different from ARMv4/5/6 and ARMv7. Big-endian on
ARMv4/5/6 is BE-32 while big-endian on ARMv7 is BE-8, which are not
compatible.
Therefore, the musl big endian toolchain that is built for ARMv4
cannot work for ARMv7, it can only work for ARMv4/5/6.
This commit updates the musl toolchain dependency accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "--no-patch" option used by the git downloader appeared on git
1.8.4. Systems with older git versions show an error and fall back to
the wget downloader, which isn't suitable for all the cases.
Signed-off-by: Enrique Ocaña González <eocanha@igalia.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Docker is a platform to build, ship, and run applications in portable
containers.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: drop LIBRARY_PATH, as suggested by Christian.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other packages when building against btrfs-progs require headers in the
staging directory under /usr/include/btrfs. This patch enables
installing btrfs-progs to the staging directory to enable other packages
to build against the btrfs-progs headers.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: take into account the BR2_STATIC_LIBS case, by adding the
relevant BTRFS_PROGS_INSTALL_STAGING_OPTS variable, as well as a patch
to make sure "install-static" installs the static library and the
headers.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.7 2.6.0 YES OK (3)
arm_versatile 4.7 2.5.0 YES OK
arm_vexpress 4.7 2.5.0 YES OK
m68k_mcf5208 4.7 2.5.0 YES OK
m68k_q800 4.7 q800-v2.4.0 NO (2) OK
microblazebe 4.7 2.5.0 YES OK
microblazeel 4.7 2.5.0 YES OK
mips32r2el_malta 4.7 2.5.0 YES OK
mips32r2_malta 4.7 2.5.0 YES OK
mips32r6el_malta 4.7 2.6.0 YES OK (3)
mips32r6_malta 4.7 2.6.0 YES OK (3)
mips64el_malta 4.7 2.5.0 YES OK
mips64_malta 4.7 2.5.0 YES OK
mips64r6el_malta 4.7 2.6.0 YES OK (3)
mips64r6_malta 4.7 2.6.0 YES OK (3)
ppc_g3beige 4.7 2.5.0 YES OK
ppc_mpc8544ds 4.7 2.5.0 YES OK
ppc_virtex_ml507 4.7 2.5.0 NO OK
ppc64_pseries 4.7 2.5.0 YES OK
sh4 4.7 2.5.0 YES OK
sh4eb 4.7 2.5.0 NO (1) OK
sparc_ss10 4.7 2.5.0 YES OK
sparc64_sun4u 4.7 2.5.0 YES OK
sparc_sun4u 4.7 2.5.0 YES OK
x86 4.7 2.5.0 YES OK
x86_64 4.7 2.5.0 YES OK
xtensa_lx60 4.7 2.6.0 YES OK
xtensa_lx60_nommu 4.7 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libarchive builds three commandline utilities: bsdtar, bsdcpio, and
bsdcat. This change adds control over the third utility to the list of
configuration options.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
One of the "features" of a2x is that the '-r|--resource' flag imports
resources relative to the [SOURCE_FILE], not the CWD. The current
implementation tries to import resources from the destination dir $(@D),
which works fine for out-of-tree builds because $(@D) is an absolute
path, however in-tree builds treat $(@D) as a relative path, which breaks
because a2x treats $(@D) relative to SOURCE_FILE.
Use the make command $(abspath names...) to convert the dest dir to an
absolute path before passing it as a resource.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Atul Singh Mandla <atul.singh.mandla@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently warpboard uses a 4.0.5 kernel version from github.
Move to version 4.4.15, which is a long term supported kernel version.
With 4.4.15 we no longer need the extra two kernel patches as they have
already been upstreamed.
Use a linux fragment file, so that wireless can be functional by default.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Generate an sdcard.img image to make it easier the deployment of a
Buildroot image.
[Peter: drop unneeded exit statement in post-image script]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ipkg dates back to the early 2000s when Compaq started the handhelds.org
project, it hasn't seen development since 2006, got forked as opkg a decade
ago and is starting to cause autobuilder issues, so mark it as deprecated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fbset is used by one of the init scripts, so we need it as a runtime
dependency.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
PowerPC FSI Debugger, for low level debugging of a Power8 CPU over FSI.
Signed-off-by: Joel Stanley <joel@jms.id.au>
[Thomas:
- add to package/Config.in
- add hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dtc package currently does not install libfdt for the host install.
It can be useful to have libfdt on the host, such as for building QEMU
with the --enable-fdt configure switch.
Signed-off-by: David Raeman <draeman@bbn.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CFLAGS includes a search path for HOST_DIR/usr/include using -I.
When HOST_CFLAGS is used by a package, these flags are passed to the
compiler ahead of flags passed by the package's internal make system.
If a package has a header file with the same name as a header file in
HOST_DIR, this causes the toolchain to prefer the file from the system
include directory because its -I appears first on the command
line. Conflicts should prefer the file provided by the package. This
can be accomplished by using -isystem, which is more appropriate then
-I for system-level include paths.
Real-world example: libfdt might be installed in HOST_DIR to install a
patched version of QEMU that does not bundle libfdt. Meanwhile, the
u-boot package provides its own copy of libfdt.h that is modified from
upstream. If libfdt is also installed into HOST_DIR, then
host-uboot-tools fails to build because it grabs the libfdt.h from the
HOST_DIR area instead of using the patched version from its own source
tree. This patch corrects this issue.
This assumes the -isystem flag is supported by the host compiler,
which is the case since gcc 3.0 at least.
Signed-off-by: David Raeman <draeman@bbn.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Concise Binary Object Representation (CBOR) Library
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas:
- use lower-case letters in the Config.in option prompt
- remove BR2_PACKAGE_TINYCBOR_JSON2CBOR sub-option, simply rely on
the cjson package being enabled
- pass prefix=/usr only at install time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports a patch from upstream grub2 that fixes a build
issue occuring at least with recent gcc versions:
gettext/gettext.c:37:36: error: storage size of 'main_context' isn't known
static struct grub_gettext_context main_context, secondary_context;
Fixes bug #8991.
Bug reproduced with:
BR2_x86_64=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_5=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_GCC_VERSION_6_X=y
BR2_TARGET_GRUB2=y
BR2_TARGET_GRUB2_X86_64_EFI=y
BR2_TARGET_GRUB2_BUILTIN_MODULES="boot linux ext2 fat squash4 part_msdos part_gpt normal efi_gop terminal"
and verified fixed after adding this patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libsepol uses cdefs.h which is a internal glibc header.
This header is not intended to be used by any program and will cause
compiling against musl (and possibly other c libraries) to fail.
This patch fixed this issue and replaces all references of
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since efl update to 1.15 version, the efl package is a "real"
Buildroot package. It doesn't contain any subdirectories anymore.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this config you can bootup a Linux kernel
in GDB simulator and test Blackfin kernel and
userland.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #9091, the U-Boot environment we provide for the
Microzed and Zedboard platforms loads the ramdisk at 0x2000000 and the
DT at 0x3000000. This means that a large enough ramdisk overwrites the
DT. It makes more sense to load the DT at 0x2000000 and the ramdisk at
0x3000000.
Reported-by: Michael Monaghan <michaellmonaghan@gmail.com>
Tested-by: Michael Monaghan <michaellmonaghan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- restrict to EABIhf for ARM, since the libraries are pre-built for
this ABI
- add comment about the glibc dependency
- indicate odroid-scripts is a runtime dependency
- remove fbset dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with gdb 7.11, the bundled gnulib want to use rpl_gettimeofday
(gettimeofday replacement) due bad guessing when cross-compiling with musl
and uClibc toolchains. Instead of patching gnulib configure script to fix
the test, use gl_cv_func_gettimeofday_clobber=no to not use rpl_gettimeofday.
Thanks to Thomas Petazzoni to suggest this patch.
Reported upstream:
https://sourceware.org/bugzilla/show_bug.cgi?id=19798
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When built statically, runc try to link against Scrt1.o which is not
provided by uClibc ARM toolchain for static build only.
[...]arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find Scrt1.o: No such file or directory
collect2: error: ld returned 1 exit status
On ARM, Go forces the use of -pie, for some reason:
pie := (goarch == "arm" && goos == "linux") || goos == "android"
if pie { // we need to use -pie for Linux/ARM to get accurate imported sym
cgoLDFLAGS = append(cgoLDFLAGS, "-pie")
}
For this reason, add a dependency on BR2_TOOLCHAIN_SUPPORTS_PIE for ARM
CPUs to disable Go for such toolchains.
While at it, rewrap Go dependencies.
[1] http://lists.busybox.net/pipermail/buildroot/2016-July/167206.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Christian Stewart <christian@paral.in>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc-ng does not support PIE for some architectures as
arc and m68k. It isn't implemented in the static linking case, too.
With musl toolchains you might have static PIE support with little
patching of gcc. Static linking for GNU libc isn't enabled in
buildroot. Fixup any package using special treatment of PIE.
(grep -ir pie package/*/*.mk)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: use positive logic.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the SGX demos from Imagination Technologies, they are
available as binaries only.
This package contains binaries compiled for the SGX graphics accelerator used
in the following Texas Instruments SoCs: AM335x, AM437x, AM4430, AM5430.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uCP1020 product family (ucp1020) is an Arcturus Networks Inc.
System on Modules product featuring a Freescale P1020 CPU,
optionally populated with 1 or 2 Gig-Ethernet PHYs,
DDR3, NOR Flash, eMMC NAND Flash and/or SPI Flash.
Signed-off-by: Oleksandr G Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- fix disablehpd bug (thanks to Thomas for spotting it.)
- change default HDMI mode to 1080p60hz.
- add support for HDMI HotPlug Detection control.
- add support for mason timer.
- add support for headless boot
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the pinned docker-containerd version to the latest in advance
of the introduction of docker-engine v1.12.0-rc4.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is The Linux UPnP Internet Gateway Device 2. It is
modified from the original Linux UPnP Internet Gateway Device
[http://linux-igd.sourceforge.net/] according to UPnP
InternetGatewayDevice:2 specifications.
It implements the UPnP Internet Gateway Device version 2
specification (IGDv2) and allows UPnP aware clients, such as
MSN Messenger, Azureus or Miranda to work properly from behind
a NAT firewall.
Please edit /etc/upnpd.conf before using upnpd!
https://github.com/ffontaine/igd2-for-linux
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- fix license, it's BSD-2c, not just "BSD"
- add dependency on host-pkgconf]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If those flags are not explicitly passed, the sdl2_ttf configure script
will include -I/usr/include and -L/usr/lib in the compile flags, which
are obviously unsafe for cross-compilation.
"checking for X... libraries /usr/lib, headers /usr/include"
Fixes:
http://autobuild.buildroot.net/results/f968fb31e9882cc856296a7c729d93e345e9e861
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- don't pass an argument to --with-x
- use --without-x instead of --with-x=no]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switching to the rtl8821au fork at github.com/abperiasamy/rtl8812AU_8821AU_linux.
- The current fork we are using is maintained by 1 person.
- The current fork does not work, and there are no plans to fix this:
- https://github.com/ulli-kroll/rtl8821au/issues/5
- https://github.com/ulli-kroll/rtl8821au/issues/6
- In practice, the current fork has numerous instability issues.
- Our lab switched to the abperiasamy fork a couple months ago and have been very happy with it.
- The contributor list for the abperiasamy fork contains 21 well-known individuals in the community.
- The raspberry pi community recommends the abperiasamy fork and uses it extensively.
- Firmware blobs are not necessary with the new fork.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If asciidoc and xmlto are around it will automatically enable the
documentation build which is pointless.
Build time on i5-3330 with docs = 37s, without docs 25s.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pcmanfm can now use gtk3+ so use that over gtk2+ if it's available.
Since it's only x11-safe for the moment the comment and deps other than
gtk stay the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove check for the ser2net binary
- add check for the configuration file
- use 'printf' instead of 'echo -n'
- fix indentation where needed]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The defconfig file for at91bootstrap was false:
s/sama5d4_xplainedsnf_uboot_secure/sama5d4_xplainednf_uboot_secure.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the gamin package, patch
0003-fix-missing-PTHREAD_MUTEX_RECURSIVE_NP.patch was introduced to fix
the build with musl. Indeed, while musl defines "linux", it does not
define PTHREAD_MUTEX_RECURSIVE_NP, but only PTHREAD_MUTEX_RECURSIVE. So
the check was simplified to only verify if PTHREAD_MUTEX_RECURSIVE_NP is
defined.
However, this doesn't work well with uClibc linuxthreads. In uClibc,
PTHREAD_MUTEX_RECURSIVE_NP and PTHREAD_MUTEX_RECURSIVE are not
pre-processor defines, but enum values. For this reason, even if
PTHREAD_MUTEX_RECURSIVE_NP actually exists, #if
defined(PTHREAD_MUTEX_RECURSIVE_NP) is false. So, the gamin code falls
back to using PTHREAD_MUTEX_RECURSIVE.
Except that for uClibc linuxthreads, PTHREAD_MUTEX_RECURSIVE is defined
only if __USE_UNIX98 is defined. For the NPTL implementation,
PTHREAD_MUTEX_RECURSIVE is defined either if __USE_UNIX98 or
__USE_XOPEN2K8 are defined. This strange difference has been reported to
uClibc-ng upstream [1].
However, regardless of this uClibc behavior, using #if defined to check
for the availability of PTHREAD_MUTEX_RECURSIVE_NP is not good. This
commit therefore switches to using a proper AC_CHECK_DECL() autoconf
test, which works regardless of whether the value is #define'd or
defined as an enum value.
This fixes the build of gamin on linuxthreads platforms, such as
Microblaze or m68k.
Fixes:
http://autobuild.buildroot.net/results/887df97196d7777efbf18a7bee91aa45c1a98700/ (Microblaze)
http://autobuild.buildroot.net/results/eb4389474e1b30b5c395a07a857da13a66763bdb/ (m68k)
[1] http://mailman.uclibc-ng.org/pipermail/devel/2016-July/001087.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efl package has zlib in its dependencies, but does not select it,
which causes a dependency check error with the following defconfig:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2016.05-1162-g94c7298.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_EFL=y
This commit fixes this by selecting the zlib package at the Config.in
level.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Eolian languages bindings needs C++11, so we needs at least a gcc 4.8
for the host and target variant.
The C++11 support with gcc 4.7 is not sufficient.
Build eolian_cxx for the host only if Eolian support for the target is
selected.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fix misc typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AllJoyn Base Services are common services used by many devices,
providing a set of interfaces for different devices to interact and
interoperate with one another.
Thin Client Library is designed to bring the benefits of the AllJoyn
distributed programming environment to embedded systems.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AllJoyn framework defines a common way for devices and apps to
communicate with one another regardless of brands, categories,
transports, and OSes. Developers write applications that discover
nearby devices, and communicate with each other directly and through
the cloud, unleashing new possibilities in the Internet of Things.
AllJoyn Thin Core Library (AJTCL) is designed to bring the benefits
of the AllJoyn distributed programming environment to embedded
systems.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AllJoyn Base Services are common services used by many devices,
providing a set of interfaces for different devices to interact and
interoperate with one another.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- Add dependency on BR2_TOOLCHAIN_HAS_SYNC_4, inherited from the
alljoyn package.
- select BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL when neither
BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION nor
BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING are selected. This ensures that
the package will at least build and install one thing.
- rename the Config.in option prompts from "alljoyn-<foo>" to just
"<foo>"
- rework the build command to use a loop rather than duplicate code
- rework the install command to also use a loop, and to not discard
errors.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle setting the
hostname and the issue file in there. A user using a custom skeleton
should be fully responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We expect the custom skeleton to be fully filled with the necessary
files, now. There is definitely no reason we should handle network
settings in there. A user using a custom skeleton should be fully
responsible for providing a functional skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the following commits, we'll be switching more options to be
conditional on the default or custom skeleton.
So, it makes sense that those options come after the choice of a
skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Being custom means that our default one is not suitable to start with.
So there is no reason to offer it as the default path.
Add a check that it is not empty.
Add a separating empty line, for good measure, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS is a bit special. When Busybox is
enabled, it is a Busybox option. When Busybox is not enabled, it is a
stand-alone option, forcibly enabled.
So we can safely 'select' it without ensuring (via a 'depends on' or
another 'select') that Busybox is enabled.
However, the name of this option does not express the fact that it is
safe to select it without checking Busybox, which can lead to a bit of
time-consuming head-scratching.
To avoid future puzzlement from an unsuspecting observer, add a a big
fat comment that this option can be selected without any dependency on
Busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: slightly improve the wording of one of the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fcgiwrap was not updated since April 2015, but the last GitHub release
is from February 2013. Therefore, bump fcgiwrap to the latest commit
as it features fixes and improvements, but is unlikely to be part of a
release soon.
Update as well:
* the license file (latest commit features a COPYING file),
* the Config.in URL, as the previous "official" URL now returns an
HTTP 502 error.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove patch
0001-Add-configure-option-to-disable-documentation.patch as this is
now include in the new version.
- Add dependency on gettext when needed, since it uses libintl if
gettext functionality is not provided by the C library.
- Keep autoreconf/gettextize, which are needed for the link against
libintl to work properly.
Signed-off-by: Roland Franke <fli4l@franke-prem.de>
[Thomas:
- add dependency on gettext when needed
- add comment about why autoreconf/gettextize are kept
- cleanup commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In a Buildroot configuration with mysql enabled it might be useful to
be able to build Kodi without mysql support because Kodi may not need
it at runtime.
Kodi can store its internal databases not only locally using sqlite
but also on a mysql server, this allows several local Kodi machines to
share the same databases. When using only one Kodi instance, mysql
support is not needed, and not building mysql support helps reducing
build time.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most of the times this is not needed because libdrm & mesa3d already
pull in the dependency to udev. Let's add it anyway to make sure that
udev is really used and to document that Kodi makes use of udev.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use one package per line to ease review of Kodi 17 version bump, where
10+ packages will be removed. This patch contains no code changes.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch can be removed when Kodi 17.0-Krypton is released because
cximage was removed in the git master branch.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ti-gfx package supports a set of SGX implementations which are
used in some TI SoCs, newer parts are not supported by this package.
This patch adds a list of supported TI SoCs to the help text.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: update with the new name of packages: ti-sgx-{km,um}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
refpolicy requires host-libsemanage. host-libsemanage will fail to
compile without host-audit. This commit adds host-audit as a
requirement for host-libsemanage.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-libsemanage requires host-audit to compile, therefore this patch
adds a host variant for the audit package.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: remove libcap-ng usage for now, rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it will install $(TARGET_DIR)/etc/rc.d/init.d/messagebus when
building on a redhat/fedora host.
Regardless of that we provide our own initscript.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the userspace libraries for the SGX graphics
accelerator of the following Texas Instruments SoCs: AM335x, AM437x,
AM4430, AM5430 It also adds a config file for the libraries and a
System-V init script.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas:
- Add Config.in comment about the ti-sgx-km dependency.
- Add dependency on glibc since the package consists of pre-built
libraries that can only work with glibc.
- Add Config.in comment about thread and glibc dependencies
- Use tabs for indentation everywhere.
- Use git:// instead of http:// to clone, since http:// doesn't work.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the kernel module for the SGX graphics accelerator of the
following Texas Instuments SoCs: AM335x, AM437x, AM4430, AM5430
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas:
- Add Config.in comment about Linux kernel dependency
- Extend Config.in help text to indicate that a TI specific kernel is
needed
- Fetch using git:// since fetching from http://, since fetching over
http:// doesn't work.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rt-tests doesn't build with some "old" toolchains due to missing local
syscall number definition for the new kernel deadline scheduler on some
architectures. Upsteam added __NR_sched_setattr and __NR_sched_setattr
definition only for common architectures (x86, x86_64, arm) and tile if
not already defined [1].
Instead of adding missing syscall number, avoid building rt-tests
with toolchain compiled with too old kernel headers (i.e
!BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14)
At runtime, a 3.14 kernel must be used otherwise these syscall are not
available.
[1]
ef2dee4232
Fixes:
http://autobuild.buildroot.net/results/6fa/6facaeb10588bdf3ff029b882a8ae6ffba815cdc
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- use the AML_LIBS_STAGING_DIR variable instead of PREFIX/M_PREFIX to
indicate the compiler sysroot, which allows to use a foreach loop
in the build commands.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The X11 package builds the "mcookie" executable, when selected, into
the directory output/host/usr/bin/mcookie. The xapp_init's "configure"
attempts to find the "mcookie" executable using the host's path. If
the host has an installed "mcookie" application in their /bin folder,
it can influence the build. The following patch forces the expected
mcookie location.
Related:
http://thread.gmane.org/gmane.comp.lib.uclibc.buildroot/50310
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- remove conditional on the mcookie package being enabled, since
xapp_xinit depends on the X.org server, and the X.org server
selects mcookie.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add hash for amd-gpu-bin-mx51-11.09.01.bin (the framebuffer variant of
the driver).
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the font size of the Mind block the same as all other blocks (it
was smaller) and re-adjust the min height of all blocks so that they
look the same.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google and Mind are already credited in the "Past Sponsors" section
for their contribution to the FOSDEM 2016 meeting.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mtd tests have proven very useful in testing both flash stability
and JFFS2 changes. Adding an option to install the integrity test.
Signed-off-by: Yugendra Sai Babu Nadupuru <yugendra.sai.babu.nadupuru@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas: rename Config.in option, misc improvements in .mk file, add
patch to fix build with uClibc/musl.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This MBR routine is based on TS' original bootloader. It is loaded by
the bootrom stored in the companion FPGA, and chainloads an executable
located at the beginning of the first non-fs (0xda) partition.
Signed-off-by: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
[Thomas:
- add hash file.
- install image in INSTALL_IMAGES_CMDS instead of
INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Naxsi is a third party nginx module reads a small subset of simple rules
containing a list of known patterns involved in website vulnerabilities.
This module behaves like a DROP-by-default firewall for nginx.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- include Config.in file directly from package/Config.in and not from
package/nginx/Config.
- improve Config.in help text with more details
- rename the package prompt from ngx_http_naxsi_module to nginx-naxsi
- remove NGINX_NAXSI_SOURCE, and fix the definition of
NGINX_NAXSI_SITE
- change license from GPLv3 to GPLv2+ with OpenSSL exception
- cange license file from LICENSE to naxsi_src/naxsi_json.c. The
LICENSE file exists in the latest Git master of the project, but
not in the 0.54 tag that we're packaging.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A module for nginx web server for handling file uploads using
multipart/form-data encoding (RFC 1867).
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename from nginx-upload-module to nginx-upload. Indeed, we don't
want all nginx modules to be suffixed with "-module"
- include the module Config.in file directly from package/Config.in,
like we do for Python, Perl, Lua or TCL modules.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Removed 0001-lib-gen_tables.c-define-EHWPOISON-when-not-available.patch
as this was applied upstream.
- Removed 0002-Fix-usage-of-audit_status.feature_bitmap.patch as this was
applied upstream.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgudev indeed used to be provided directly by eudev, but it's no
longer the case since eudev 3.1.3, and this has been already taken
into account in Buildroot in commit
6cfa5de33e. We simply forgot to update
the comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-libkmod does not exist, but there's --enable-kmod.
Also, add --enable-blkid to the list of options, since we already depend
on it (from util-linux).
Also do not align \ for line continuations.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a recent update in the code, CONFIG_RTL8821AU=m is the expected
kernel configuration environment variable to be set, not
CONFIG_RTL8812AU_8821AU=m as was previously set.
Presently the package does effectively nothing.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When atomic intrisics are missing, libfastjson falls back to using
pthread mutexes to manage atomicity. Of course, this is much less
efficient than atomics, but it does the job.
Propagate the new dependency to rsyslog, the sole user of libfastjson.
Note: rsyslog already depends on threads for itself, but we believe it
is better to have the exact same dependency propagated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libfastjson is supposed to use the __sync_*4 atomic intrinsics, but alas
it is not using them because their ./configure decides they are not
available: it uses AC_TRY_RUN to check for them, and the default is to
decide they are not available, because of cross-compilation.
Besides, one of the source files was not including the generated
config.h, so even after fixing ./configure there was still a build
error.
The first patch is a backport from upstream to fix the missing
inclusion.
The second patch is switching AC_TRY_RUN over to AC_LINK_IFELSE, as the
only thing we're interested in is to check for the presence of the
atomic intrisics, and linking is enough for that.
Fixes:
http://autobuild.buildroot.org/results/192/1923d0b570adba494f83747a9610ea6ec35f5223/http://autobuild.buildroot.org/results/23a/23ac0e742ed3a70ae4d038f8c9eadc23e708f671/
and many others...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- point <pkg>_LICENSE_FILES to a file that actually exists
- add host-pkgconf to the dependencies
- remove unneeded CONF_OPTS options
- pass FREETYPE_CONFIG in the environment to point to freetype-config]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- remove all sub-options to select the various image formats. Between
no formats enabled and all formats enabled, the size difference of
the library is ~30 KB, so it really isn't worth having all those
sub-options:
-rwxr-xr-x 1 thomas thomas 22444 juil. 15 15:51 libSDL2_image-2.0.so.0.0.1
-rwxr-xr-x 1 thomas thomas 59216 juil. 15 15:52 libSDL2_image-2.0.so.0.0.1
consequently, we simply enable unconditionally all image formats
that don't have any dependency, and use "automatic" dependencies
for the 4 formats that require an external library
- remove the host package variant, as it isn't used anywhere.
- remove --with-sdl2-prefix and --with-sdl2-exec-prefix, and instead
add a dependency on host-pkgconf so that pkg-config is used
- remove --disable-static, this is handled by the autotools-package
infrastructure already
- point <pkg>_LICENSE_FILES to an existing file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Thompson <peter.macleod.thompson@gmail.com>
[Thomas:
- Rewrap Config.in help text.
- Remove unused SDL2_GFX_VERSION_MAJOR variable
- Add host-pkgconf to the dependencies, since pkg-config is used to
find sdl2. This fixes the build, otherwise -I/usr/include/sdl2 was
added to the CFLAGS when sdl2-config was found on the host machine.
- Remove --with-sdl2-prefix, since this option doesn't exist, and
using pkg-config is a better solution (--with-sdl-prefix exists,
but is not useful when pkg-config is available).
- Remove --enable-static, packages are not supposed to pass such an
option, it's not automatically by the autotools package
infrastructure.
- Pass --disable-sdltest instead of --disable-sdl2test since the
latter doesn't exist, while the former does.
- Pass SDL2_GFX_AUTORECONF = YES since the configure/Makefile.in are
not up-to-date and therefore it tries to use aclocal at build time.
- Adjust _LICENSE_FILES, since there is no file named 'LICENSE', use
the smallest source file instead, since it contains the license
text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some old binary blobs drivers only implement an old VIDEODRV ABI. This
is the case for the AMD Catalyst driver for example.
Such a situation already exists with the nvidia-tegra23, that only
support the VIDEODRV ABI 14.
Since VIDEODRV ABIs are not backward compatible [0], lets introduce an
older Xserver version that supports such an old ABI.
0. https://www.x.org/wiki/XorgModuleABIVersions/
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cyclictest program doesn't build with musl toolchains due to
several issues with a different implementation of the "struct sigevent"
from Glibc/uClibc and musl (similar to [1]).
The pi_stress program doesn't build with musl toolchains with the
following error since musl doesn't provide _POSIX_THREAD_PRIO_INHERIT
define even if musl have Priority Inheritance mutexes [2]:
src/pi_tests/pi_stress.c:78:2: error: #error "Can't run this test without PI Mutex support"
#error "Can't run this test without PI Mutex support"
Since the fix for cyclictest is not trivial, disable rt-tests for musl
toolchains.
Fixes:
http://autobuild.buildroot.net/results/c27/c272ef7df6190cbb688e6db0b1ee210e6fbb472c
[1] https://bugs.mysql.com/bug.php?id=80322
[2] http://www.openwall.com/lists/musl/2016/03/18/6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Remove fetching upstream patch to fix build without MTD support
* Update .config
* Update help text as SSL support is now needed for other features
than the webserver too
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit b6ff742ca0.
This bump causes numerous build failures, so Vicente and Yann proposed
to revert it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
GNUTLS-SA-2016-2 - vulnerability that affects certificate verification
when GnuTLS is used in combination with the p11-kit trust module.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This engineering build fixes the kernel dwarf stack unwinder feature for
ARC targets.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Related to:
4520524ba0
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
syslog-ng is built with the default buildroot flag localstatdir=/var
This causes three issues:
1) syslog-ng creates two files (syslog-ng.ctl and syslog-ng.persist in /var)
which shouldn't have random files generated in it.
2) SELinux expects it in it's default directory /var/run.
3) This breakes read only file systems because /var/ usually isn't mounted as
a seperate filing system.
Setting the buildflag to the default /var/run
fixes all three of thee of these issues.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot version to 2016.07 and also remove the extra patch
as it is already part of U-Boot mainline now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- drop 0001-native-affinity.patch as it was replaced upstream [1]. Autoreconf
could be dropped
- drop conf env ac_cv_file__proc_stat=yes ac_cv_file__proc_meminfo=yes because
these tests no longer run when cross-compiling [2]
- upstream created a custom check function to use ncurses*-config [3] but it
does not allow to override the path to ncurses*-config, leading to a build
failure as the htop build system would search the path of host tools.
A new patch 0001-Allow-to-override-ncurses-config-path.patch allows this
override [4]. It brings back the need to autoreconf
- set path to ncurses5-config in conf env in order to avoid the htop build
system finding it in the path of host tools
[1] dfad0afb36
[2] b561956637
[3] 96c929f82b
[4] 666f12f60f
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prompt of all host packages is "host foo", except for imx-usb-loader
that uses "host-foo", and more precisely "host-imx-usb loader", which is
really weird. This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Erik Stromdahl <erik.stromdahl@gmail.com>
[Thomas:
- Rename prompt from "host-mxsldr" to "host mxsldr".
- Add BR2_armeb in the list of architectures under which this package
can be enabled.
- Remove double quotes around the _SITE value.
- The license is GPLv2+, not GPLv2.
- Add a value for the _LICENSE_FILES variable
- Rename MXSLDR_DEPENDENCIES to HOST_MXSLDR_DEPENDENCIES, since the
dependencies of the host package are no longer derived from the
dependencies of the target package.
- Remove the MXSLDR_MAKE_OPTS variable that contained the PKG_CONFIG
variable definition: it is already passed in HOST_CONFIGURE_OPTS.
- Remove hash file, as it is not checked on Git packages for now.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We include a file containing cached values for Fortran tests that are
performed at the configure step. These tests fail when cross-compiling
and this is known upstream. See:
https://www.open-mpi.org/community/lists/users/2013/01/21186.php
In that thread the upstream maintainer admits that "cross compiling
OpenMPI is a known issue" and the way to workaround this is to
"pre-populate configure's answers to the Fortran tests (so that it
doesn't actually have to run anything)"
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: use a config cache.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We include a file containing cached values for Fortran tests that are
performed at the configure step. These tests fail when cross-compiling
and this is known upstream. See:
https://www.open-mpi.org/community/lists/users/2013/01/21186.php
In that thread the upstream maintainer admits that "cross compiling
OpenMPI is a known issue" and the way to workaround this is to
"pre-populate configure's answers to the Fortran tests (so that it
doesn't actually have to run anything)"
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: use the config cache mechanism to preseed the cache variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This hook is not required anymore since we handle WebRTC dependency
with --enable/disable-webrtc-aec.
Also the hook doesn't have any effect since we use autoreconf because
it should have been a POST_CONFIGURE_HOOKS.
So, we can remove it safely.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AllJoyn framework defines a common way for devices and apps to
communicate with one another regardless of brands, categories,
transports, and OSes. Developers write applications that discover
nearby devices, and communicate with each other directly and through
the cloud, unleashing new possibilities in the Internet of Things.
https://allseenalliance.org
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rewrap Config.in help text
- remove / at the beginning of the ALLJOYN_DISTDIR variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lapack is a fortran-based linear algebra math library.
Signed-off-by: Benjamin Kamath <bkamath@spaceflight.com>
[Samuel:
- Update to use BR2_TOOLCHAIN_HAS_FORTRAN symbol + add comment
when the toolchain does not meet the requirements.
- Update powerpc/uclibc dependencies to allow build with musl.
- Bump to 3.6.1.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: move comment about installed libraries from .mk file to
Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jemalloc has a hard-coded list of supported architectures, which it uses
to define the minimum alignment for allocations. It whines at build time
(not at configure time) when it does not know that alignment.
Fix that by making jemalloc depend on the known-supported architectures.
Fixes:
http://autobuild.buildroot.org/results/674/674b6022f9a403528a758c0785656d2bda79e0a9/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- split ARM and AArch64 dependencies on two lines
- for SuperH, instead of using BR2_sh && !BR2_sh2, explicitly list the
SH4 variants, since only SH4 is supported by jemalloc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes PYTHON_PILLOW_INSTALL_TARGET_CMDS to actually
install pillow in target directory instead of host.
While at it, it also fixes the version for the hash, and uses the more
conventional "define ... endef" construct to define variables in
python-pillow.mk.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- fix the license information, it's GPLv3+, LGPLv3+.
- add a comment about the COPYING file containing only the LGPLv3 text,
even though there is some GPLv3+ code.
- minor tweaks in the .mk file
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There was a typo in commit
b05ff12b6c ("uboot: install multiple spl
images"), leading to a missing closing parenthesis. This commit fixes
this typo.
Fixes bug #9086
Reported-by: Jebodiah Sensai <dkaplan65@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Sébastien Szymanski [1], the apply-patches script
doesn't stop if a tar command can't extract an archive.
Use "set -e" to exit immediately if a command return an error.
Be sure to ignore any expected error: when we check if a patch to be
applied has the same basename as an already applied patch, the grep
would fail when no such patch was already applied. We should not fail
in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Shell In A Box implements a web server that can export arbitrary command
line tools to a web based terminal emulator. This emulator is accessible
to any JavaScript and CSS enabled web browser and does not require any
additional browser plugins.
Signed-off-by: Olivier Singla <olivier.singla@gmail.com>
[Thomas:
- Use "select" instead of "depends on" for the OpenSSL dependency, and
use alphabetic ordering.
- Rewrap Config.in help text.
- Use github macro
- Explain why the OpenSSL dependency is mandatory, while
--enable-ssl/--disable-ssl are available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds python pillow, the friendly python image library fork,
it includes a backported patch to disable configuration platfom
guessing.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Thomas:
- Rewrap Config.in help text.
- As suggested by Bernd Kuhls, bump the version to 3.3.0 and drop the
patch that has been applied upstream.
- Rework the optional dependency handling to follow what we do in most
Buildroot packages.
- Add licensing information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas:
- Add dependency on BR2_USE_MMU
- Rewrap Config.in help text
- PID file goes in /var/run/
- Daemon to start is /usr/sbin/sockd, not /usr/sbin/dante
- Remove staging installation, as it is not needed
- Remove --enable-debug, since that's not what BR2_ENABLE_DEBUG is
meant for
- Install an example configuration file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some platforms, there are multiple generated spl images. Extend
BR2_TARGET_UBOOT_SPL_NAME to allow these multiple images to be installed
after uboot build completes.
For example, the NextThingCo C.H.I.P. uses two binaries from uboot,
spl/sunxi-spl.bin and spl/sunxi-spl-with-ecc.bin.
Signed-off-by: Jason Abele <jason@nextthing.co>
[Maxime:
- Add foreach loop for general case and mkpimage
- Use firstword for zynq case]
Signe-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two previous patches have been merged upstream, so they have been
deleted here. Another patch (picked from upstream) has been added to fix
the build with thread-less toolchains.
Libiio v0.7 provides two new backends, a USB backend (using libusb-1.0)
and a serial backend (using libserialport).
Additionally, it is now possible to compile libiio with thread-less
toolchains. In that case, thread safety is disabled.
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Register package-specific target-finalize hooks with the
newly-introduced <PKG>_TARGET_FINALIZE_HOOKS.
This incidentally fixes luarocks, which was registering target-finalize
hooks even when it was not enabled.
To be noted, the skeleton package is not converted, because it is not
optional, we always have it; so its hooks would always be registered
anyway. Besides, the followup patches would render this conversion moot
anyway, since those hooks would be spread across the various skeleton
packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, packages using target finalize hooks must remember that they
need to register their hook in TARGET_FINALIZE_HOOKS
conditionally (otherwise their hook will be triggered even if the
package is disabled).
In order to avoid this potential mistake, this commit introduces a
per-package target-finalize hook variable, in which packages can
register their target-finalize hooks, with the guarantee that they will
only be triggered if the package is enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hostname does not look like it serves any useful purpose, except
maybe to set set perladmin email.
Which is undoubtfully useless on the target.
A followup commit will make the hostname depend on the default skeleton,
so it won't always be available. We can not rely on it to be set.
Besides, even today it is not guaranteed to be set; a user may well
leave it empty.
Use a dummy hostname.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, our /etc/mtab points to /proc/mounts. This was all neat so
far, and was good for a sysv-like init system.
However, the way today is to point it at /proc/self/mounts, the
per-process mount tab.
Additionnally, that's what systemd expects. If /etc/mtab is not a
symlink to ../proc/self/mounts and the rootfs is readonly, systemd would
whine loudly (and a service unit would be marked failed).
Since it works well for sysv-like init systems too, just use that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In makefiles, variables have global scope. We traditionally ensure that
we get no name clashing by prefixing all variables with the package
name.
Currently, this is not the case in the skeleton package, for historical
reasons (code snippets copied over from the common Makefiles). We
currently have a mix of naming for the variables:
- some are indeed prefixed with SKELETON_
- some are prefixed with SYSTEM_
- some are prefixed with both
- some are not prefixed
Clean up these discrepancies, and prefix all variables with just
SKELETON_ and drop the SYSTEM_ prefix.
Also include SET_ in all variables that do set something (getty) for
consistency across all the variables.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 2.26 binutils tarball has incorrect timestamps for the .info files,
so binutils build system tries to regenerate them with makeinfo. In
order to avoid depending on host-texinfo, we simply touch the .info
files so that their timestamp is newer than the corresponding source
files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the dependency on host-texinfo to binutils, when the
source is fetched from Git. Thanks to this, we can remove the
0800-Docs-Prevent-build-failures-when-makeinfo-is-missing.patch patch
from the ARC-specific version of binutils.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have tried multiple solutions to solve the "makeinfo" problem in
binutils and gdb, without finding anything really convincing. So it
seems like the easiest solution is to add a texinfo host package, and
use it as a dependency of binutils/gdb when they are fetched from
Git. This commit introduces just the host-texinfo package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gallium driver also provides DRI-like infrastructure and OpenGL.
This change prevents from removing pkg-configs of them also when
installing the driver.
Signed-off-by: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 7b17bafc5d by Davide Viti has a
detailed explanation of some unusual techniques used for building
host-cmake and (target-)cmake. This is useful information for whoever
starts hacking on it, so copy it in the makefile, where it will be
easily noticed.
Also remove the sentence about host-cmake having a runtime dependency
on host-pkgconfig (not true anymore: it's the specific cmake-packages
that depend on it) and fix typos.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 3d475ee0ba a dependency on
host-pkgconf was added to host-cmake. It is a workaround to fix build
failures for packages that use pkgconf through a cmake module, but do
not depend on host-pkgconf as they should.
Since it is the package that needs host-pkgconf and not host-cmake
itself, move the dependency to the proper place, in pkg-cmake.mk.
Also copy the explanation on the mentioned commit as a comment in
order to clarify why we do this.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- update on top of master
- drop empty HOST_CMAKE_DEPENDENCIES, no longer needed since host
dependencies are no longer derived from target dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is required to build uClibc-ng with threading support and FDPIC
binary format.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 0dca644e44 ("boot/uboot: fix
missing host-openssl for i.MX28 target"), we pass HOSTCFLAGS/HOSTLDFLAGS
in the environment of U-Boot when building. This is needed to allow
U-Boot to find the OpenSSL headers/libraries when they are
needed. Unfortunately, this breaks the build with old U-Boot versions as
the U-Boot Makefiles were not designed to have HOSTCFLAGS passed in,
which causes some important CFLAGS from the U-Boot build system to be
ignored.
As suggested by Arnout, we pass the HOST_CFLAGS inside HOSTCC directly,
which allows to pass the CFLAGS without overriding the internal U-Boot
CFLAGS.
Tested with an old U-Boot (2012.10), and a modern U-Boot in a
configuration that needs OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides jemalloc, a malloc(3) implementation that
emphasizes fragmentation avoidance and scalable concurrency support.
A host variant is added as it will be used by rust.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- remove trailing slash (noticed by Romain Naour)
- add !BR2_STATIC_LIBS dependency (noticed by Romain Naour).]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
docker-containerd is a daemon and API for controlling and managing runC
containers.
https://containerd.tools/
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- simplify a bit the comments about the runtime dependencies
- add missing comment on wchar, and take into account the BR2_USE_MMU
dependency in the comment
- factorize the build step with a foreach loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
runC is a CLI tool for spawning and running containers according to the
OCP specification.
runC is used by the latest Docker engine versions, however, runc itself
is standalone and has no other dependencies.
https://runc.io/
Signed-off-by: Christian Stewart <christian@paral.in>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ACPI Component Architecture (ACPICA) project provides an operating
system (OS)-independent reference implementation of the Advanced
Configuration and Power Interface Specification (ACPI).
It contains tools such as acpidump, iasl, acpixtract, etc.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: adjust install flags to -m755.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The situation looks like following for elf2flt and binfmt FLAT:
* Only gcc for bfin/m68k implements
-msep-data (BR2_BINFMT_FLAT_SEP_DATA) and
-mid-shared-library (BR2_BINFMT_FLAT_SHARED), so the corresponding
options are made only visible on those architectures.
* When the default of BR2_BINFMT_FLAT_ONE is used on m68k, broken
binaries are produced, which mainly end up in SIGILL, so do not use
it for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- also add the dependencies on m68k/bfin to BR2_BINFMT_FLAT_SHARED
- rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Library and some tools (dbus-lanuch, dbus-run-session) are dual
licensed under GPLv2 or AFLv2.1 and others (dbus-monitor, dbus-send,
dbus-cleanup-sockets, dbus-uuidgen) are licensed under GPLv2+
only.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GnuTLS core library is licensed under LGPLv2.1+ while gnutls-openssl
library is licensed under GPLv3+. Annotate the license with components.
Reviewed-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas:
- add comment about the license of the "core library" since some files
seems to be mistakenly under LGPLv3+ even though the library is
licensed under LGPLv2.1+.
- add the README file in the license information, since it contains a
lot of useful details.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's really not necessary to have each option for the different file
formats named "enable XYZ file format support". Saying "XYZ support" is
sufficient.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The only menu was "Module Selection", even though it contained
options (like "NPM for target") which are not related to selecting
modules. This commit therefore removes the menu ... endmenu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With only 3 sub-options, it doesn't really make a lot of sense to have a
sub-menu, so kill it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also makes the prompts of the various sub-options more in line with what
we do in the rest of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Keep the existing sub-menus, because there are a lot of entries in those
sub-menus. Using comments to separate them is not a totally satifactory
solution.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tests programs are not that important; at least, they're probably less
important than the drivers selection.
Move it down to after the drivers selection.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is based on a patch sent by Vicente Olivert Riera and commented by
Arnout Vandecappelle [1].
- Bump version to 1.23
- Add a hook to fix cross-compilation
- Fix license and license files
- Remove patch applied upstream
- Add a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS variable
- Propagate the dependencies using that variable:
* package/cppcms
* package/crda
* package/gnupg2
- package/gcr
- package/midori
* package/kodi
* package/libaacs
* package/libassuan
* package/libgcrypt
* package/libgpgme
* package/libksba
* package/libmicrohttpd
- package/janus-gateway
- package/kodi
- package/ola
- package/systemd
* package/libssh
* package/libssh2
- package/php-ssh2
* package/netatalk
* package/network-manager
* package/ntfs-3g
* package/opkg
* package/php-gnupg
* package/rng-tools
* package/strongswan
* package/vpnc
[1] http://patchwork.ozlabs.org/patch/416427/
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- rebase on master
- changing systemd no longer needed, as it no longer selects
libgcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Maxime:
- rebase on master
- bump to new version
- propagate dependencies to missing packages]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- fix hash file.
- change the way to handle the various arch so that it works properly
for uClibc.
- add nios2 arch support.
- Maxime Hadjinlian learned some basic Emacs-fu to do the final fixups
of this commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Passing this option disables the lfloat and ladsp pcm plugins and certain
APIs as explained by:
https://patchwork.ozlabs.org/patch/619527/
But people might want to use these even if they use software floating point,
and the size difference is really minimal, so don't pass this option.
-rwxr-xr-x 1 peko peko 774K Jul 4 18:50 target-orig/usr/lib/libasound.so.2.0.0
-rwxr-xr-x 1 peko peko 709K Jul 4 19:08 target-softfloat/usr/lib/libasound.so.2.0.0
If people don't want the extra pcm plugins then they can simply be disabled
using BR2_PACKAGE_ALSA_LIB_PCM_PLUGINS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It appears that Imagemagick needs to be configured with
--with-gs-font-dir=/usr/share/fonts/gs else it will not find
the ghostscript fonts and /etc/ImageMagick-6/type-ghostscript.xml
will contain the wrong font paths. You end up with messages like:
Magick: unable to read font `(null)' @ error/annotate.c/RenderFreetype/1153
They are non-fatal but could get annoying fast if you are using 'convert'
on a lot of files.
Without patch we end up with (depending on what is available on the host):
Font Configuration:
Apple fonts --with-apple-font-dir=default
Dejavu fonts --with-dejavu-font-dir=default none
Ghostscript fonts --with-gs-font-dir=default /usr/share/fonts/type1/gsfonts/
Windows fonts --with-windows-font-dir=default none
And with the patch:
Font Configuration:
Apple fonts --with-apple-font-dir=default
Dejavu fonts --with-dejavu-font-dir=default none
Ghostscript fonts --with-gs-font-dir=/usr/share/fonts/gs /usr/share/fonts/gs/
Windows fonts --with-windows-font-dir=default none
[Peter: reworked/extended commit message]
Signed-off-by: Robert Sohn <grepper@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- add comment in scancpan about the version dependency, suggested by
Yann E. Morin.
- add comment in perl.mk about the need to sync any version change with
scancpan, also suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there were multiple sub-menus, their prompts are turned into
comments.
Some option were missing a prompt, so add one; switch integer options to
use the 'int' type instead of 'string'. Add separating lines around
options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, pulseaudio optionally depends on webrtc if it is enabled.
However, it is never explcitly enabled or disabled, although
pulseaudio's ./configure has --enable/disable-webrtc-aec.
Forcibly enable/disable webrtc support using those options.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've merged nodm, the autologin display manager, we can
get rid of xinit, and startx hack and use nodm to start X on boot.
While here, let's start xterm and glmark2, just as demos.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No significant changes but 4.6.3 moved parts of the device tree
into a different file, so dts patch must be updated.
[Peter: explicitly configure kernel headers for 4.6]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sha256 checksum will be computed locally either by scanpypi at package
creation or by hand by package updates. Define this checksum as
'computed locally' so that one doesn't need to change this comment by
package updates. Also put comments for both md5 and sha256 in one line.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Having the BR2_PACKAGE_BUSYBOX_SHOW_OTHERS dependencies in
package/Config.in is not very practical: it makes this file not very
readable, and puts the dependency away from the package itself, which
can sometimes be confusing. Therefore, this commit moves the dependency
in each package Config.in file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though mplayer bundles the ffmpeg code base (and ffmpeg is not
affected by this issue), mplayer uses its own build system and doesn't
test properly for the availability (or not) of atomic operations. In
order to keep things simple, we simply make mplayer depend on the
availability of atomic operations, since it assumes they are available.
The reverse dependency is propagated to libplayer and tovid.
Fixes:
http://autobuild.buildroot.net/results/6306757da3be9bb7e3cdcbfc8abb4e64a3fb7913/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change init script to start and stop all nfs daemons in a consistent
way. Using the same kill command, start/stop the daemon, printout OK or
FAIL and touch or deleted necessary files.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
[Maxime:
- Make it really consistent to stop the daemons as pointed out by
Yann E. Morin
- Remove the -9]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation of enabling vde2 support in host-qemu package.
Signed-off-by: Simon Maes <simonn.maes@gmail.com>
[Thomas:
- add HOST_VDE2_CONF_OPTS and HOST_VDE2_MAKE, like we have for the
target variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for building the system emulation mode in
host-qemu. To do so, it adds the BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE and
BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE sub-options, making sure that the
latter is selected if the former is not enabled. This ensures that at
least one is enabled *and* that existing configurations continue to
build the user-land emulation (which was the only one we supported until
now).
The list of architectures supported by the system emulation mode is the
same as the one for the user-space emulation mode (as far as the
existing list is concerned), so we simply drop the comment about this
dependency list being related to the user-space emulation only.
Signed-off-by: Simon Maes <simonn.maes@gmail.com>
[Thomas:
- Make sure either BR2_PACKAGE_HOST_QEMU_LINUX_USER_MODE or
BR2_PACKAGE_HOST_QEMU_SYSTEM_MODE get selected.
- Unconditionally enable FDT support in host-qemu when in system
mode (so the option BR2_PACKAGE_HOST_QEMU_FDT has been removed)
- Remove the unneeded BR2_PACKAGE_HOST_QEMU_HAS_EMULS option.
- Remove the SDL related option, we really on the system to provide
SDL.
- Remove the BR2_PACKAGE_HOST_QEMU_DEBUG and
BR2_PACKAGE_HOST_QEMU_STRIP_BINARY options, since they are not really
useful.
- Remove HOST_QEMU_SITE and HOST_QEMU_SOURCE definitions, since they
are automatically derived from QEMU_SITE and QEMU_SOURCE anyway.
- Group things more logically in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_WPA_SUPPLICANT_WIFI_DISPLAY depends on
BR2_PACKAGE_WPA_SUPPLICANT_AP_SUPPORT because CONFIG_WIFI_DISPLAY needs
CONFIG_P2P.
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc 6.1.0 and binutils 2.26 internal bfin toolchain can be used. A
gcc patch is required, which was reported upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures, f.e. Blackfin doesn't support to configure GCC with
--with-cpu to set some CPU specific default CFLAGS (-mcpu=foo). Use a
hidden config symbol to give a hint which architecture supports it,
otherwise add defaults to toolchain wrapper for internal toolchains.
Idea from Thomas Petazzoni.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- simplify the Config.in logic with just one option named
BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS, defined in package/gcc in one
place.
- improve the organization of the code and name of variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we build the list of patches to include to compute the hash for
ccache, a typo precented the special gcc-initial/ and gcc-final/
directories from a global patch dir to be included in the calculation.
Fix that by properly expanding the $(PKG) variable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a tag rather than a sha1, it's more obvious.
Remove the patch, it's been applied upstream.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that this package builds and bundles a number of libraries,
such as GLEW and Irrlicht. We are not interested in doing
non-upstreamable changes, so it is not desirable to modify
this choice in any way.
In addition, Supertuxkart builds a version of the angelscript
interpreter. If a compatible version of angelscript is installed
on the system, it's possible to use it.
[Peter: DOS newlines for 0002 patch, tweak comment header]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Chromebook Snow (Samsung XE303C12) is an Exynos 5 board with
a keyboard, an 11 inch screen and a battery attached.
It is relatively developer-friendly and can run mainline Linux
kernels with little to no effort.
There is barely anything special about this target as far as toolchain
is concerned, but its bootloader only accepts signed kernel images
in a Chromium OS specific format, and is not controllable otherwise.
This config provides a script for building the proper kernel blobs,
and a short manual for booting Buildroot images on this device.
In-tree exynos_defconfig is used for the kernel, with a fragment
to change mwifiex into a module. When built statically, mwifiex
attempts to load its firmware before rootfs is mounted and fails.
[Peter: use BR2_KERNEL_HEADERS_AS_KERNEL=y, lock kernel version,
enable fit support in u-boot mkimage]
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Damien Lanson <damien@kal-host.com>
[Thomas:
- Add dependency on BR2_PACKAGE_XORG7, which is necessary when
selecting BR2_PACKAGE_XLIB_LIBX11 and BR2_PACKAGE_XLIB_LIBXEXT.
- Fix indentation of Config.in help text.
- Add host-pkgconf to the dependencies, since the configure script uses
pkg-config to detect dependencies.
- Add references for the patches.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some users have the need to be able to tweak the content of the target
rootfs with root-like rights, that is, from inside the fakeroot script.
Add a new system option to allow those users to provide a list of
scripts, like the post-build and post-image scripts, that will be run
from our fakeroot script.
[Peter: pass TARGET_DIR to scripts, tweak help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Cam Hutchison <camh@xdna.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Transmission bundles copies of both libraries and uses them if they are
not provided by the system. This patch allows transmission to use the
system libraries of libminiupnpc/libnatpmp.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fortran depends on libquadmath when available, make the buildroot
toolchain option depends on this new hidden symbol,
[Vincent: only do "HOST_GCC_FINAL_USR_LIBS += libquadmath" for i386 and
x86_64, otherwise it will fail saying "libquadmath.a: file not found"]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This hidden symbol allow to know when libquadmath can be built and
installed.
Also, declaring this symbol in toolchain-common.in allows to use it in
both external and buildroot toolchain backend.
This will be needed for adding/improving the fortran support.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed unconditional 'done' output when starting
and stopping the daemons. Instead check return value
of daemon and print out OK or FAIL.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use a template service file as all of the daemons use almost
identical arguments and generally appear the same to the init
system.
We "Wants=" zebra as that's the daemon for interfacing to the
kernel, and it's not required for the other daemons to work
but it's probably going to be used in nearly all setups.
/usr/bin/env is needed as systemd doesn't allow the instance
variable (%i) in the executable path.
We don't enable these services by default as this would require
creating configuration and /etc/default files. (And is easily
achieved with an FS overlay)
[Peter: remove killmode/killsignal/restartsec as suggested by Maxime]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building host gcc, patches stored in global patches directories are
skipped. This patch fixes the unexpected behavior.
Signed-off-by: Chunhui He <hchunhui@mail.ustc.edu.cn>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- rename the loop variable from 'D' to 'patchdir'
- add some additional comments
- remove final ; at end of loop when applying the patches, since it's
not needed]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, when an user forgets to define a SITE, he gets some fairly
weird download failure. In order to make things easier to diagnose, this
commit adds a check in the package infrastructure that verifies that if
SOURCE has a value, SITE is not empty.
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the custom external toolchain is locally available, we currently
define SITE/SOURCE to empty variables. Now that the package
infrastructure doesn't define a value for SOURCE when VERSION is empty,
it doesn't attempt to download a file anymore, so we can get rid of
those empty SOURCE/SITE variables in the toolchain-external package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the mcookie package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the tz package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the skeleton package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the mkpimage package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the mkpasswd package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the mke2img package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the SOURCE
variable in the initscripts package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the getent package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the virtual package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the package infrastructure doesn't attempt to download a package
that has an empty version string, there's no need to define the VERSION and
SOURCE variables in the makedevs package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when the package defines no _SOURCE and no _VERSION
variables, we end up trying to download <PACKAGE>-undefined.tar.gz.
This is utterly pointless.
Change the logic to not attempt a download when neither _SOURCE
nor _VERSION is set:
- do not set an undefined _VERSION to "undefined"
- do not append an empty (or "undefined") version to the package
rawname
Consequently, for packages that have no _VERSION, the build
directory will be just the package name (which to some may look
nicer than the current "package-undefined").
Furthermore, the message trace is also a bit leaner (to the same
people that find "package" nicer than "package-undefined").
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cups is now available from Github, with tarballs uploaded by the
maintainers, so we use this new upstream location.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches in the cups package are Git formatted, except
0004-remove-pie.patch, so this commit makes things consistent by also
making this patch Git formatted.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes http://autobuild.buildroot.org/results/5a5/5a50be9feeb5da7694e9a42f615f0b7276319aeb/
The recent change to use git submodules for sunxi-mali instead of the github
wrapper without changing the version unfortunately doesn't work for people
who have already built sunxi-mali, as the existing github tarball will be
used instead of buildroot doing a clean git clone (with submodules).
The sunxi-mali commit we are using is the latest in the repo, so we cannot
fix it by bumping the version. Instead simply remove the last character of
the VERSION sha1 so the existing tarballs are no longer used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sunxi-mali-prop only served a feeding prey for sunxi-mali to get the
proprietary libs.
Now that sunxi-mali downloads them (as the git submodule they are), we
no longer need sunxi-mali-prop.
Remove it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sunxi-mali git tree is set up with a submodule that contains the
actual libraries. Since there was no support for git submodules so far,
we used a dirty trick to have that submodule cloned by its own package,
with sunxi-mali just vampirising it into its own build dir.
Now that we have support for git submodules, we can simplify stuff a
bit, and have sunxi-mali directly download the proprietary libs itself.
Remove the .hash file since we're not checking hashes for git clones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove patches as they were applied upstream:
0001-Use-BUILD_SHARED_LIBS-cmake-standard.patch
c8ec6fcab4
0002-Rename-test-fixed-cmake-warning.patch
0b2c22bd46
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Since we run compileall on all python files in TARGET_DIR as part of
the finalization, the align.py from xcb-proto will be compiled (it is
not compiled as part of the package build). This file contains mixed
tab-spaces indentation, which python 3.5 no longer allows.
Add an upstream patch that cleans up the indentation in this file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that host-tar dependencies were broken with automatic derivation
of host dependencies:
host-tar could depend (or not) on host-attr (and even on non-existing
host-acl!), depending on BR2_PACKAGE_BUSYBOX.
Now, host-tar has no dependency.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This feature consists in automatically deducing dependencies of a host
package from the dependencies of the target variant.
However, it causes some issues, and many host packages need different
dependencies than their target variants.
Now that host dependencies are explicitly set for all packages, we can
remove it.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment was missing in menuconfig with a non-threaded toolchain
supporting dynamic linking.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch also removes an incorrect dependency between host-libftdi and
host-boost when BR2_PACKAGE_LIBTFDI_CPP is set.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some git repositories may be split into a master repository and
submodules. Up until now, we did not have support for submodules,
because we were using bare clones, in which it is not possible to
update the list of submodules.
Now that we are using plain clones with a working copy, we can retrieve
the submdoules.
Add an option to the git download helper to kick the update of
submodules, so that they are only fetched for those packages that
require them. Also document the existing -q option at the same time.
Submodules have a .git file at their root, which contains the path to
the real .git directory of the master repository. Since we remove it,
there is no point in keeping those .git files either.
Note: this is currently unused, but will be enabled with the follow-up
patch that adds the necessary parts in the pkg-generic and pkg-download
infrastructures.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently use git-archive to generate the tarball. This is all handy
and dandy, but git-archive does not support submodules. In the follow-up
patch, we're going to handle submodules, so we would not be able to use
git-archive.
Instead, we manually generate the archive:
- extract the tree to the requested cset,
- get the date of the commit to store in the archive,
- store only numeric owners,
- store owner and group as 0 (zero, although any arbitrary value would
have been fine, as long as it's a constant),
- sort the files to store in the archive.
We also get rid of the .git directory, because there is no reason to
keep it in the context of Buildroot. Some people would love to keep it
so as to speed up later downloads when updating a package, but that is
not really doable. For example:
- use current Buildroot
- it would need foo-12345, so do a clone and keep the .git in the
generated tarball
- update Buildroot
- it would need foo-98765
For that second clone, how could we know we would have to first extract
foo-12345 ? So, the .git in the archive is pretty much useless for
Buildroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we are using bare clones, so as to minimise the disk usage,
most notably for largeish repositories such as the one for the Linux
kernel, which can go beyond the 1GiB barrier.
However, this precludes updating (and thus using) the submodules, if
any, of the repositories, as a working copy is required to use
submodules (becaue we need to know the list of submodules, where to find
them, where to clone them, what cset to checkout, and all those is
dependent upon the checked out cset of the father repository).
Switch to using /plain/ clones with a working copy.
This means that the extra refs used by some forges (like pull-requests
for Github, or changes for gerrit...) are no longer fetched as part of
the clone, because git does not offer to do a mirror clone when there is
a working copy.
Instead, we have to fetch those special refs by hand. Since there is no
easy solution to know whether the cset the user asked for is such a
special ref or not, we just try to always fetch the cset requested by
the user; if this fails, we assume that this is not a special ref (most
probably, it is a sha1) and we defer the check to the archive creation,
which would fail if the requested cset is missing anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matt@thewebers.ws>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now this library wasn't handled by the Buildroot packaging,
so add a new config option to disable it when requested.
Also disable boost-type_erasure for the host variant to keep it as
minimal as possible.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMUSphinx toolkit is a speech recognition toolkit with various tools
used to build speech applications. CMU Sphinx toolkit has a number of
packages for different tasks and applications. The toolkit is designed
for use on mobile platforms.
Signed-off-by: Jonathan Ben-Avraham <yba@tkos.co.il>
[Thomas:
- license is BSD-2c, not MIT
- add --without-lapack]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since systemd v230, bootchart has been removed from the source of
systemd and now lives in its own repository.
A new package will be added in the next commit.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since v230 of systemd, the compat libraries have been fully removed.
4de282cf93
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: rewrap Config.in help text in Config.in.legacy and put the
option at the right place.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems logical to enable a few options along with systemd when it's
the init system.
Also change the help as timesyncd is a daemon that implements an SNTP client.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't want to create a bunch of group and users that might not be
used, it's more elegant to create them when the associated features is
selected.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise fftw fails to configure:
configure: error: --with-combined-threads incompatible with --enable-openmp
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The console problem goes away with qemu 2.6.0 so it seems it's now a
requirement, update readme.txt accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to current "include/configs/sunxi-common.h"
U-Boot environment is stored on SD-card with offset 544 kB
and its size is limited as 128 kB.
Given memory layout of sunxi boards:
1. SPL
2. U-Boot
3. U-Boot environment
4. Partitions
(see http://linux-sunxi.org/Bootable_SD_card#SD_Card_Layout for details)
we need to make sure the first real partition starts at least
with 544+128 kB offset. Adding a small safety gap let's put
the first partition with offset 1MB from the beginning of SD-card.
Otherwise current setup gets broken as soon as one saves U-Boot
environment with "saveenv" which basically overwrites FAT partition with
zImage and board no longer boots into Linux kernel.
[Peter: extend description, add padding to u-boot partition instead]
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Carlos Quijano <carlos@crqgestion.es>
Cc: Andi Shyti <andi@etezian.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new change which enabled automatic module loading on boot does not handle
the cases when module alias includes spaces. It prevents modules to be loaded
since script fails:
% find /sys/ -name modalias | xargs sort -u
sort: /sys/devices/platform/Fixed: No such file or directory
First alias in question is "platform:Fixed MDIO bus".
Amend the script to support above like cases.
Fixes: 07f46c2b6d ("package/busybox: support automatic module loading with mdev")
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The support of qrencode depends of the journal gateway feature as it is
used to display the key used to seal the journal.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd-journal is a group used for controlling user access to the
journal when used with tools like journalctl.
While we're at it, sort the users list to improve readability.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And export BR2_REPRODUCIBLE for post-build / post-image scripts.
[Peter: Extend commit message,
move export together with our other exports,
add comment explaining why we override local/timezone]
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Making the builds reproducible involves turning off build timestamps,
which some users may find annoying. So make the reproducible builds
optional.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ancient distros (especially enterprise-grade still in use) do not accept
ln --relative.
Revert the upstream commit, since the problem it was trying to fix is
not applicable in the context of Buildroot (even with a merged /usr).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the documentation on BR2_ENABLE_DEBUG, the intention is to get
a build with debug symbols and not a "debug build" since that can have
the unintended consequence of being a different code path then a
release build type definition.
Switch the "Debug" to "RelWithDebInfo" in the cmake package support
to accomodate getting the debug symbols and still be a release
build.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For fortran detection, some projects check for fortran availability
using the FC/FCFLAGS variables, and others for the legacy F77/FFLAGS
ones.
So, make sure the legacy fortran F77 and FFLAGS variables are set in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
[Romain:
- fix autoreconf issue by using GETTEXTIZE and AUTORECONF
- fix issue with missing makeinfo
- move version number comment in .mk]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: add GPLv2 license, used for the programs.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for a custom headers version, or for the same headers as the
kernel, wedefault to a "very old" version (i.e. 2.6.x in practice).
However, as Vivien explained, when using the same headers as the kernel,
and the kernel is set to use the default version (aka latest version
known to Buildroot) of the kernel, one would expect the headers are
automatically tracking the latest version. Off course, that expectation
is broken because of the above.
However, whatever version we default to, it will probably not be
correct, whether we default to the latest version or to the "very old"
version.
So, simply drop the specific default version, so the default is now the
latest version.
Note: that has the potential to break existing defconfig files that
relied on the "very old" version to be the default. Well, whatever,
they'll get a build failre quite early, and it is easy to fix.
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_BUILDROOT_WCHAR is only defined when uclibc is selected,
whereas BR2_USE_WCHAR is always defined. Due to this, we were disabling
quadmath support even with glibc or musl.
So, use BR2_USE_WCHAR to drive the gcc libquadmath option.
In addition, invert the logic of the condition to use positive logic,
and rework the comment to no longer mention gcc 4.6: libquadmath still
exists, and it still requires wchar support.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efivar internal build system uses flags such as -std=gnu11 ,
-Wmaybe-uninitialized , -flto which are available in gcc >= 4.7 only.
These flags are passed both to target build and to build a host tool.
For the host part, this has been worked around by overriding
'gcc_flags', but doing that for the target would remove all flags that
upstream intended for the target build.
Buildroot doesn't support building gcc 4.6 in its own toolchain anymore
but it's possible to use an external toolchain with gcc 4.6 which would
be unable to build this package.
This patch adds a limitation on toolchains with target gcc >= 4.7 to
make sure that the flags are available in the chosen toolchain.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenBLAS is optimised for specific CPU models, which don't fully match
with the GCC code generation options. Therefore, we can't automatically
select BR2_PACKAGE_OPENBLAS_TARGET based on the CPU choice. Instead, let
the user select the TARGET name, but offer a sensible default. Other
possible solutions were deemed too complicated: adding choice options in
the ambiguous cases, or only making the option user-visible when there
is ambiguity.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable the -Werror gcc option because is causes the following error
when using gcc 6.x on the host.
p_vmlinx.cpp💯5: error: this ‘if’ clause does not guard...
[-Werror=misleading-indentation] if (a->p_paddr > b->p_paddr) return 1;
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ucl fails with the following error when using gcc 6.x on the host:
checking whether your compiler passes the ACC conformance test... FAILED
configure:
configure: Your compiler failed the ACC conformance test - for details see
configure: `config.log'. Please check that log file and consider sending
configure: a patch or bug-report to <markus@oberhumer.com>.
configure: Thanks for your support.
configure:
configure: error: ACC conformance test failed. Stop.
Fix the issue by using the ISO C90 standard.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to setup.py tornado requires backports.ssl_match_hostname
for Python < 3.2 and certifi for Python < 3.4.
Actually both requirements are optional and tornado alone can work
without them, but Python packages like python-circus check requirements
at runtime and though they don't use this funtionality, they insist on
having these packages installed.
An upstream patch fixes backports.ssl_match_hostname dependency and
selecting python-certifi for Python 2 fixes certifi dependency till
this is fixed upstream.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit reworks the output of the start(), stop() and reload()
functions. The return values of start-stop-daemon are now checked and a
OK or FAIL message is printed out.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch removes 'set -e' from the netsnmp init script since it causes
the init script to terminate if an error occurs. This prevents the
script to create an "FAIL" printout in case of an error.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change the init script to get rid of double code. Start, stop and reload
code has been put into separate functions and 'restart' will just call
stop() and start() with a delay in between.
Signed-off-by: Andreas Ehmanns <universeII@gmx.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove patch already upstream 0001-remove-use-of-sys-cdefs.h.patch
7b085136a7
- add new dependency on BR2_USE_WCHAR (version 2.2 uses mbtowc())
- add new dependency on locale support
- add note to help text about the need of a working UTF-8 locale
- also rewrap help text to 72 characters
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setools 3.3.8 won't cleanly compile against newer versions
of the new selinux libraries. This patch fixes these errors.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
An additional patch is needed to fix the build with uClibc.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[Thomas: add patch to fix build with uClibc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 0001-execption-lib-path-fix.patch is also no longer needed, as the
new version of libsemanage includes the fix provided by the patch.
As such, the patch was removed, and 0002 was renamed to 0001.
Audit was added as a dependency as the new version of libsemanage
will fail to compile searching for audit.h
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add the select on audit + propagate the dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, if a user is using glibc 2.22, the default CFLAG
D_FILE_OFFSET_BITS=64 will cause a compile error. This flag is now
removed from the CFLAGS in the make file to ensure that toolchains
compiled against glibc 2.22 will build the new version of the package
properly.
In addition, libselinux now uses fts(), which is not available on musl,
and not provided by our default uClibc configuration. Therefore,
libselinux now depends on glibc, as well as all its reverse
dependencies.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add glibc dependency for fts().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In most cases Python's package dependencies found in setup.py are
runtime dependencies and hence don't need to be mentioned in *.mk
file.
Also add '# runtime' tag to select statements in Config.in.
__create_mk_requirements() itself is left for future uses (cffi backend
handling etc.).
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comments are meant for toolchain dependencies, not packages. Adjust the
logic to match what we do for other X11 applications.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(most of) the individual packages depends on BR2_PACKAGE_XORG7, but the
subsection comments do not, so we end up displaying them when Xorg isn't
enabled which isn't very useful:
[ ] X.org X Window System ----
*** X applications ***
*** X libraries and helper libraries ***
*** X window managers ***
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the support of capability to makedevs as extended attribute.
Now, it's possible to add a line "|xattr <capability>" after a
file description to also add a capability to this file. It's
possible to add severals capabilities with severals lines.
[Peter: extend doc, reword Config.in, extend error message,
use HOST_MAKEDEVS_CFLAGS/LDFLAGS for all flags]
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we're starting a series of updates of ARC tools.
Significantly rewritten arc-2016.03 tools introduced way too many
problems highlighted by Buildroot autobuilder. Now in attempt to
resolve as many issues as possible by the time final release of
arc-2016.09 tools is cut we'll be executing arc-2016.09 series
with engineering snapshots like this one.
We decided to go this way instead of applying separate patches here
and there because ongoing development introduces quite a lot of
changes and separate patches are not practical in Buildroot.
Moreover this will give us very clean visibility of number of
issues we see (hopefully it will decrease over time).
One of the important changes introduced in this engineering build
is initial set of changes for proper support of PIE on ARC in terms
of both building on host and running on ARC target. I expect some
PIE-related build breakages to go away and new ones will be treated
as the high-priority issues to be fixed ASAP.
For now we only update Binutils and GCC while keeping GDB
as it is of arc-2016.03 release because there're some issues
we'd like to resolve before releasing it to wider audience.
So again note this is one of the first engineering builds of
arc-2016.09 series and it might have all kinds of breakages,
please don't use it for production builds.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rebased 011-remove-python-symlink.patch
[Peter: correct .hash file comment as pointed out by Baruch]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: propagate linux-pam dependencies/comment,
needs wordexp.h, not available on uClibc,
use /etc/default/nodm for config override,
correct github/site/source handling,
disable help2man]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc, it no longer makes sense to talk about
it in the Buildroot manual as one of the supported C libraries. However,
it does make sense to indicate that we support musl.
[Peter: remove extra 'the' as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of eglibc support, this commit replaces all
occurences of "(e)glibc" by just "glibc". Most of the occurences are in
package Config.in comments.
In addition, when the form "an (e)glibc ..." was used, it is replaced by
"a glibc ...".
[Peter: add new efi* packages, s/uclibc/uClibc as suggested by Romain,
systemd / liquid-dsp tweaks as suggested by Yann]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gettextize copies a number of files from usr/share/gettext into the project
when it is run. One of these is ABOUT-NLS, which is simply a text file
explaining some details about gettext - So it isn't really critical but
autoreconf fails if gettext functionality is used and ABOUT-NLS is missing.
Normally this isn't an issue as the release tarball typically already
contains an ABOUT-NLS file, but as this is a generated file it normally
isn't checked into git so it fails for packages from git snapshots using
<foo>_GETTEXTIZE = YES (E.G. libuio):
configure.ac:42: error: required file './ABOUT-NLS' not found
As is evident from GETTEXT_REMOVE_UNNEEDED, this file normally gets
installed by gettext-runtime, but as we don't build/install that for the
host instead install it by hand.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The real functional change (to not wait for confirmation) was alredy handled
below in HOST_GETTEXT_GETTEXTIZE_CONFIRMATION, and we otherwise don't patch
upstream purely for cosmetical reasons so drop it.
gettextize is also quite noisy as is, so the single 'Press return' line imho
isn't a big issue:
>>> fetchmail 6.3.26 Gettextizing
Copying file config.rpath
Not copying intl/ directory.
Copying file po/Makefile.in.in
Copying file po/Makevars.template
Copying file po/Rules-quot
Copying file po/boldquot.sed
Copying file po/en@boldquot.header
Copying file po/en@quot.header
Copying file po/insert-header.sin
Copying file po/quot.sed
Copying file po/remove-potcdate.sin
Creating po/ChangeLog
Copying file m4/gettext.m4
Copying file m4/iconv.m4
Copying file m4/lib-ld.m4
Copying file m4/lib-link.m4
Copying file m4/lib-prefix.m4
Copying file m4/nls.m4
Copying file m4/po.m4
Copying file m4/progtest.m4
Creating m4/ChangeLog
Updating configure.ac (backup is in configure.ac~)
Creating ChangeLog
Please update po/Makevars so that it defines all the variables mentioned
in po/Makevars.template.
You can then remove po/Makevars.template.
Please run 'aclocal -I m4 -I m4-local' to regenerate the aclocal.m4 file.
You need aclocal from GNU automake 1.9 (or newer) to do this.
Then run 'autoconf' to regenerate the configure file.
You might also want to copy the convenience header file gettext.h
from the /home/peko/source/buildroot/output-test/host/usr/share/gettext directory into your package.
It is a wrapper around <libintl.h> that implements the configure --disable-nls
option.
Press Return to acknowledge the previous three paragraphs.
>>> fetchmail 6.3.26 Autoreconfiguring
CC: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CONFIG_BGSCAN_SIMPLE is missing from the defconfig included with
wpa_supplicant. Many programs that depend on wpa_supplicant assume
bgscan is enabled, for example connman will try to set bgscan by default.
It is safe to always enable CONFIG_BGSCAN_SIMPLE since it is only used if
wpa_supplicant is configured to do so.
Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The phrase "Supports several hundreds of packages" is unusual to hear in
English (or at least American English). The more common alternatives are
"Supports several hundred packages" or "Supports hundreds of packages".
The latter sounds like a larger amount, so change the phrase to that.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following what's done in Raspberry Pi's defconfigs, let's
unify the consoles in Minnowboard Max defconfigs, providing
consoles on HDMI and serial port.
[Peter: use tty1 like on rpi]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And since we switched to non-gnu mirror better use the small xz tarball.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change. The git hash used is actually just the 2015.07
release, so use the release tarball instead of git. Likewise, we have a
dedicated option for u-boot.img, so use that instead of the custom format.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstreamed patches.
Drop autoreconf since it's no longer required.
Patch 0002-no-zlib.patch is no longer required, and is in fact harmful.
Update homepage URL.
Fixes:
CVE-2015-8874 - #215 Stack overflow with gdImageFillToBorder
CVE-2016-3074 - gd2: handle corrupt images better
CVE-2016-5767 - Integer Overflow in gdImagePaletteToTrueColor()
resulting in heap overflow
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix qt5enginio version, is 1.6.1 for qt5.6.1-1 (hash
is already updated by previous qt5 bump version patch).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the shut down of www.lm-sensors.org we do not have a package
download location anymore, so we update the i2c-tools package to use
the git repository hosted at kernel.org.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In efl 1.15.x, Lua "old" support is broken with Lua 5.2+ [1].
With the patch added in efl 1.16 to fixes this issue, libevas fail to link with
the following error:
CCLD bin/ecore_evas/ecore_evas_convert
host-efl-1.16.1/src/lib/evas/.libs/libevas.so: undefined reference to `luaL_openlib'
collect2: error: ld returned 1 exit status
Makefile:19021: recipe for target 'bin/ecore_evas/ecore_evas_convert' failed
Since 9ba8d1cce4, the luajit support can be
enabled in efl package.
In order to update the efl stack to 1.17, switch to luajit support and remove
Lua "old" support since it's not fixed upstream yet. But the drawback is the
efl stack depends implicitely on BR2_PACKAGE_LUAJIT_ARCH_SUPPORTS.
[1] https://phab.enlightenment.org/T2728
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move TAR_OPTS so that long options (or any option with an initial '-')
may be passed to tar. Since TAR_OPTS is at the front of the list, single
letter options still work.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The efivar build process starts by building one tool for the host,
which is needed for the rest of the build. This tool currently fails
to build with old gcc versions because the gcc.specs used by efivar
specifies -std=gnu11. To address this, this patch:
- passes 'gcc_flags=' to the host build, so that the custom gcc specs
are not passed. They are in practice not needed for the build of
the simple makeguids host utility.
- passes -std=gnu99 instead of -std=c99 in the build of host
makeguids, because the source code uses anonymous structs and
unions, which requires std=gnu99 and not just std=c99
In addition, the build by default assumes that the target toolchain is
LTO capable, and that therefore you can call gcc-ar, gcc-nm and
gcc-ranlib. This fails short when the target toolchain is for example
gcc 4.7. To address this, we explicitly specify AR, NM and RANLIB to
be used, but pass them as make options instead of in the environment,
in order to override the values specified in the package Makefile.
Fixes:
http://autobuild.buildroot.net/results/fe40c1d139ba8ddeef3dafd5c1818a946f014d7c/
Cc: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove non-existing options:
* --disable-wsap
* --disable-direct3d
* --disable-gsettings
Remove options that are already handled later in the .mk file, using
optional dependencies:
* --disable-rtmp
* --disable-hls
* --disable-dash
Rename disable->strp to disable-srtp, which essentially fixes a typo.
Remove liveadder plugin - no longer a separate built option, it's been
merged into audiomixer. Config.in.legacy handling is added for the
removed option.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
[Thomas: add Config.in.legacy handling for the liveaddr plugin option,
tweaks to the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5 can optionally enable udev support, especially to enumerate input
devices dynamically. Without udev, devices are not properly enumerated,
and any device that is not present at launch time is never seen (there
is no support for hotplug, that is).
Currently, Qt5base has no explicit dependency on udev, so it will all
depend on the build order. Sometimes, a package that requires udev will
be built before qt5base and Qt5 will have support for udev, sometime no
such package is built before qt5base and Qt5 will not have support for
udev.
Add an explicit dependency on udev, but only if it is enabled.
Note: this only really requires libudev, but we do not yet have a
separate libudev; we still only have a udev provider (be it eudev or
systemd).
Signed-off-by: "Yann E. MORIN" <yann.morin@orange.com>
Cc: Cedric Chedaleux <cedric.chedaleux@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop comment, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Almost all packages which are saved for legal-info have their source
archives downloaded as part of 'make source', which makes an off-line
build completely possible [0].
However, for the pre-configured external toolchains, the source tarball
is different, as the main tarball is a binary package. And that source
tarball is only downloaded during the legal-info phase, which makes it
inconvenient for full off-line builds.
We fix that by adding a new rule, $(1)-legal-source which only
$(1)-all-source depends on, so that we only download it for a top-level
'make source', not as part of the standard download mechanism (i.e. only
what is really needed to build).
This new rule depends, like the normal download mechanism, on a stamp
file, so that we do not emit a spurious hash-check message on successive
runs of 'make source'.
This way, we can do a complete [0] off-line build and are still able to
generate legal-info, while at the same time we do not incur any download
overhead during a simple build.
Also, we previously downloaded the _ACTUAL_SOURCE_TARBALL when it was
not empty. However, since _ACTUAL_SOURCE_TARBALL defaults to the value
of _SOURCE, it can not be empty when _SOURCE is not. Thus, we'd get a
spurious report of a missing hash for the tarball, since it was not in
a standard package rule (configure, build, install..) and thus would
miss the PKG and PKGDIR variables to find the .hash file.
We fix that in this commit as well, by:
- setting PKG and PKGDIR just for the -legal-source rule;
- only downloading _ACTUAL_SOURCE_TARBALL if it is not empty *and* not
the same as _SOURCE (to avoid a second report about the hash).
[0] Save for nodejs which invarriably wants to download stuff at build
time. Sigh... :-( Fixing that is work for another time...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move the declarations of _ACTUAL_SOURCE and _ACTUAL_SITE earlier, so
that they are close to where _SOURCE and _SITE are handled.
This looks so far like a purely cosmetic change, but makes more sense
with the follow-up patch, where we'll need them earlier in the file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Having a hash of the saved files can be interesting for the recipient to
verify the integrity of the files.
We remove the warning file earlier, to exclude it from the hash
list.
We generate the hash list in a temporary file that will not be matched
by the "find" expression, and once the file is generated, we remain it
to its final name.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust indentation, improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, like perl, download extra files that end up as part of
the source that Buildroot builds. Up until now, those files were not
saved in the legal-info output.
Add those files to the legal-info output.
The unfortunate side-effect is that we will also save the secondary
archive for the external blackfin toolchains; however, we already do
save the binary release of some external toolchains when they do not
provide actual source archives.
This is inherently bad, as those are not source archives, but solving
this is a bigger concern, for another series...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the legal-info infra only saves the source archive of a
package. However, that's not enough as we may apply some patches on
packages sources.
We do suggest users to also redistribute the Buildroot sources as part
of their compliance distribution, so the patches bundled in Buildroot
would indeed be included in the compliance distribution.
However, that's still not enough, since we may download some patches, or
the user may use a global patch directory. Patches in there might not
end up in the compliance distribution, and there are risks of
non-conformity.
So, always include patches alongside the source archive.
To ensure reproducibility, we also generate a series file, so patches
can be re-applied in the correct order.
We get the list of patches to include from the list of patches that were
applied by the package infrastructure (via the apply-patches support
script). So, we need to get packages properly extracted and patched
before we can save their legal-info, not just in the case they define
_LICENSE_FILES.
Update the legal-info header accordingly.
Note: this means that, when a package is not patched and defines no
LICENSE_FILES, we will extract and patch it for nothing. There is no
easy way to know whether we have to patch a package or not. We can only
either duplicate the logic to detect patches (bad) or rely on the infra
actually patching the package. Also, a vast majority of packages are
either patched, or define _LICENSE_FILES, so it is best and easiest to
always extract and patch them prior to legal-info.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches we save can come from various locations:
- bundled with Buildroot
- downloaded
- from one or more global-patch-dir
It is possible that two patches lying into different locations have the
same basename, like so (first is bundled, second is from an hypothetical
global-patch-dir):
package/foo/0001-fix-Makefile.patch
/path/to/my/patches/foo/0001-fix-Makefile.patch
In that case, when running legal-info, we'd save only the second patch,
overwriting the first. That would be problematic, because:
- either the second patch depends on the first, and thus would no longer
apply (this is easy to detect, though),
- or the second patch does not depend on the first, and the compliance
delivery will not be complete (this is much harder to detect).
We fix that by checking that no two patches have the same same basename.
If we find that the basename of the patch to be applied collides with
that of a previously applied patch, we error out and report the duplicate.
The unfortunate side-effect is that existing setups will now break in
that situation, but that's a minor, corner-case issue that is easily
fixed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: adjust coding style, fix minor typos in the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only store the filename of the applied patches.
However, we are soon to want to install those patches in the legal-info
directory, so we'll have to know where those patches come from.
Instead of duplicating the logic to find the patches (bundled,
downloaded, from a global patch dir...), just store the full path to
each of those patches so we can retrieve them more easily later on.
Also always create the list-file, even if empty, so that we need not
test for its existence before reading it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
[Tested only with patches in the Buildroot sources]
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: used $PWD instead of $(pwd), as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we save the source archives in a directory named after the
package and its version, do the same for the license files, for
consistency.
It has a not-so-bad side-effect of also saving the version string in
the all-licenses list.
The only (small) side-effect, is that the warnings about undefined
_LICENSE_FILES now contains the version string, too. That's unavoidable,
since that's what is stored in the legal report.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
enable-libudev doesn't exist as a configure option. The right one is
enable-udev.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-4472 - Improve insufficient fix to CVE-2015-1283 /
CVE-2015-2716 introduced with Expat 2.1.1
CVE-2016-5300 - Use more entropy for hash initialization than the
original fix to CVE-2012-0876
CVE-2012-6702 - Resolve troublesome internal call to srand that was
introduced with Expat 2.1.0 when addressing CVE-2012-0876
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches, and disable strip via the STRIP make environment
variable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some shells' builtin umask does not print 2 leading 0's for the umask.
Switching to bash is done anyway.
This patch switches to bash before the umask test.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 048e97ebde.
As noticed by Gustavo, we already had a sha256 hash from upstream, so adding
one more doesn't make any sense.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed 0001-fix-os2-support.patch, not needed anymore after the
version bump according to Thomas' note in the patch file.
Removed autoreconf, a configure script is now part of the upstream
tarball.
The script dvdnav-config was removed:
1de99510f5
libdvdnav uses pkg-config to find libdvdread, therefore remove
--with-dvdread-config:
5254b5d7ad
Changed LIBDVDNAV_SITE according to the news post dating 13 Feb 2014
from http://dvdnav.mplayerhq.hu/
Enabled static build, tested using this defconfig:
http://autobuild.buildroot.net/toolchains/configs/br-arm-full-static.config
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we don't have such packages in buildroot it can pick up the distro
config scripts and pollute the include path.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the rapidjson tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the qlibc tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the qdecoder tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the pifmrds tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the opencv3 tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the neardal tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the ne10 tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the mtdev2tuio tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the mrouted tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the mraa tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the lua-ev tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libcrossguid tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the ljsyscall tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libwebsock tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libucl tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libcli tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libpam-tacplus tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libopenh264 tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the libndp tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the snappy tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the leveldb tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the ktap tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the json-javascript tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the jquery-datetimepicker tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the irqbalance tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the filemq tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the civetweb tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the c-periphery tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the bandwidthd tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to jquery-keyboard, it seems the apitrace tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to
our s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d732fa4 add the BLUEZ5_UTILS_INSTALL_INIT_SYSTEMD rule, however,
it is not correct. The [Install] section of bluetooth.service is as
follows:
[Install]
WantedBy=bluetooth.target
Alias=dbus-org.bluez.service
hence there are currently two mistakes:
1) bluetooth.service is wanted by bluetooth.target not multi-user.target
2) dbus-org.bluez.service is a missing alias to bluetooth.service
This commit fixes both these issues.
Signed-off-by: Martin Bark <martin@barkynet.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop patch now upstream. Rsyslog now uses libfastjson instead of json-c,
so adjust dependencies.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-rebar tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-zlib tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-yaml tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-xml tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-utils tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-tls tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-stun tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-stringprep tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-sip tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-iconv tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-p1-cache-tab tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to jquery-keyboard, it seems the erlang-lager tarball on the
autobuilder is corrupt. Fix it by adding a .hash file so it falls back to our
s.b.o mirror.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To configure the Linux kernel, we currently provide two options:
1. Passing a defconfig name (for example "multi_v7"), to which we append
"_defconfig" to run "make multi_v7_defconfig".
2. Passing a path to a custom configuration file.
Unfortunately, those two possibilities do not allow to configure the
kernel when you want to use the default configuration built into the
kernel for a given architecture. For example, on ARM64, there is a
single defconfig simply called "defconfig", which you can load by
running "make defconfig".
Using the mechanism (1) above doesn't work because we append
"_defconfig" automatically.
One solution would be to change (1) and require the user to enter the
full defconfig named (i.e "multi_v7_defconfig" instead of "multi_v7"),
but we would break all existing Buildroot configurations.
So instead, we add a third option, which simply tells Buildroot to use
the default configuration for the selected architecture. In this case,
Buildroot will configure the kernel by running "make defconfig".
Cc: Naresh Kamboju <naresh.kamboju@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As python-msgpack dependency was replaced with python-u-msgpack,
that is a pure Python implementation, BR2_TOOLCHAIN_HAS_SYNC_4
was removed. BR2_INSTALL_LIBSTDCPP remains because of python-pyasn.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Autoreconf is no longer required in gst1-plugins-bad and it is not
done for any other gst package either. With autoreconf disabled,
gettextize and a gettext makefile patch are no longer required
and can be safely removed.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Aside from the version number increase, the package has now moved to
GitHub.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Aside from the version number increase, a newly added category `places`
is available; appending to the current icon list.
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a93fc34 modified e2fsprogs to symlink /usr/sbin/fsck to /sbin/fsck
to keep systemd happy. However, later on commit c5bd8af6 has forced
/usr/sbin to be a symlink to /sbin when using systemd. This means fsck
gets destroyed as a symlink to itself when using systemd or when setting
BR2_ROOTFS_MERGED_USR.
Since commit c5bd8af6 obsoletes commit a93fc34 revert the changes from
commit a93fc34 to solve the issue.
Signed-off-by: Martin Bark <martin@barkynet.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default hwdb files are installed in /usr/lib/udev/hwdb.d
Currently they take about ~5MB. After first boot, systemd-hwdb tool
parses them and creates a binary in /etc/udev/hwdb.bin, which takes
another ~6.5MB.
In case of initramfs images, hwdb parsing is done every boot. This adds
about 2-3 seconds to boot time in case of rootfs on SDHC class 10
card (benchmarked with am335x board). NAND boot takes even longer.
Add config option to disable hwdb in systemd, for smaller images and
better boot performance.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add new disables for libraries that aren't supported in buildroot and
sort them for ease of maintenance.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no option --enable-liblzma=no in grub2's configure script, so
the only way to disable liblzma support is to pass
ac_cv_lib_lzma_lzma_code=no.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: expand commit log, as suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Check raw mode flag for backward compatbility
- Fix membership name in bch geometry structure.
- Fix the previous implementation that may ruin the BBM
- Adapt raw page accesses to match the new raw_read/write implementation
The old raw access implementation (in GPMI driver) was considering that
data and OOB data were separated in their respective regions (the data
area and the OOB area of the page), which is not true.
They are actually interleaved this way:
METADATA + ((DATA + ECCBYTES) * N)
The new raw access implementation (in the GPMI driver) is hiding this
weird
layout to MTD users by exposing a more common layout:
DATA + METADATA + (N * ECCBYTES)
Here METADATA + (N * ECCBYTES) are exposed as if they were stored in the
OOB area.
Unfortunately kobs-ng rely on this weird layout when accessing the NAND
in raw mode.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/a7545b1
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Remove platform check in hdmi-cec and imx-lib - simplify to support builds
on multiple machines
- For ipu use the dummy defaul object to fix build issues on non-ipu hardware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/7946533
Implicitly tested through gstreamer as the
plugins rely on them for vpu decoding, e.g.:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- fix AUD NAL positioning in h.264 encoder output
(SPS/PPS/AUD were ordered incorrectly - AUD has to come first, not last)
- fix build error with examples when --enable-static is used
- pass quality factor in simplified JPEG encoder interface correctly
- add functions for querying and setting header data
useful for modifying headers, like VUI data in the SPS RBSP
- documentation updates
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c999668
Implicitly tested through gstreamer as the plugin relies on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
VPU firmware has been changed to the format of Linux codec driver firmware.
Change VPU library to adapt to firmware format change.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f5e1056
Implicitly tested through gstreamer as the plugins rely on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
* compositor: Rename ImxCompositor(Pad) to ImxVideoCompositor(Pad)
This prevents conflicts if both the NXP plugins and the gstreamer-imx
are installed in the same rootfs
* Add switches to wscript configuration to enable/disable plugins
Until now, all plugins were built (unless their dependencies were
missing). On some i.MX machines, some features are missing. For
example, the i.MX7 has no VPU. To ensure deterministic builds, it is
useful to selectively disable plugins in the build.
* ipu+pxp: : Fix deadlocks and incorrect logging in case of init error
This was causing a freeze if for example one tries to use PxP elements
on an i.MX6 Dual/Quad
* imxv4l2videosrc fixes and enhancements:
* fixes to interlacing support (incl. workarounds for analog TV input)
* remove format restriction in get_caps function
this removes the limitation on I420 formats
* simplified determination of fps (necessary due to driver limitations)
* eglvivsink: wayland: Do not commit before buffers are swapped
This fixes eglSwapBuffer swaps with damaged frames
* Documentation additions
Adds GPU memory leak notess to the FAQ
* vpu: encoder: Expose motion estimation range as property
* vpu: decoder: Drop output frame if its buffer cannot be allocated
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/cec4c47
Tested with the following commands on i.MX6Q (IPU):
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxeglvivsink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Upgrade to FW v3.1.1_r46072
- v3.1.1_r46070 plus 2 patches 391/392
- FSLARIK-391 [Decoder/H.264] VPU is always busy when decoding an
erroneous H264 bitstream
- FSLARIK-392 [Decoder/VC1] VPU outputs only 1 picture
- Change to the format of Linux coda driver firmware
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/dbb8773
Implicitly tested through gstreamer as the plugin relies on it:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is a 1.1.0_ga release, and a 1.1.1_patch release. The
patch release appears to be only for i.MX6UL, so it is bumped
to 1.1.1_patch, while the other are 1.1.0_ga.
Signed-off-by: Andrew Webster <awebster@arcx.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.org/results/d75/d7500f7e063b94e9991bacfd1df9fa5aa1967db0/http://autobuild.buildroot.org/results/f48/f485ee75ec4c9b87f17b8b8dc1898590045474b4/
For some odd reason, the file on the autobuilder ended up getting prefixed
by these 7 bytes:
00000000 31 62 30 31 61 0d 0a 1f 8b 08 00 00 00 00 00 00 |1b01a...........|
And suffixed by these 7 bytes:
0001b020 00 0d 0a 30 0d 0a 0d 0a
Which then caused gzip to fail to extract it. It is not clear to me how this
could happen (Github glitz? It looks suspiciously like HTTP/1.1 chunked
encoding going wrong, E.G. 0x1b01a = 110618 = tarball size) - but adding a
.hash file fixes it as the corruption gets detected and we fall back to our
s.b.o mirror.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches and giterize/rebase the other ones.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove html and txt documentation from the rootfs as they unlikely to be
needed.
[Peter: use xargs instead of GNU extensions as suggested by Yann]
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-7913: The print_option function in dhcp-common.c in dhcpcd
through 6.10.2 misinterprets the return value of the snprintf function, which
allows remote DHCP servers to execute arbitrary code or cause a denial of
service (memory corruption) via a crafted message.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was forgotten when the patch to Makefile.am was removed in 779676f62d
(imlib2: security bump to version 1.4.8).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove fetching upstream patch to fix build with GCC 6 - it's included in the
update.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This was forgotten when the patch to configure.ac was removed in 218938e470
(opus: bump version to 1.1.1).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_QT_OPENGL_ES was moved to a choice option. This option kind
can apparently not be selected by other packages. Therefore this patch
introduces a new Kconfig option BR2_PACKAGE_QT_OPENGL which takes care
of OpenGL support as such, BR2_PACKAGE_QT_OPENGL_NONE is not needed
anymore now. The choice options are now only used to determine the
type of OpenGL support.
This patch contains the necessary preparation to fix a build error in
the qwt package.
[Peter: fix QT_OPENGL dependencies to match options]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wojciech Nizinski <niziak@spox.org>
[Thomas:
- Add missing dependency on wchar
- Rewrap Config.in help text
- Add missing "depends on BR2_USE_MMU" on the comment about wchar
dependency.
- Switch to upstream 0.7.0 version
- Replace the hook calling autogen.sh by a hook simply creating the m4
directory, which is what prevented <pkg>_AUTORECONF from working.
- Add patch to fix build with uClibc.
- Split in separate patches the addition of the host variants of
libarchive and libsodium.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This will be needed for the host variant of the fwup package. We enable
zlib support since host-fwup needs it. All other features are explicitly
disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX specific kernel headers are not a hard dependency. Quoting README.md:
Without [--kernel-headers], the [ipu.h] header is not found, and elements
using the IPU will not be built.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add alsa-lib as optional dependency to get a reproducable build.
Without this patch configure logs:
checking for ALSA... no
configure: WARNING: ALSA library not available
After this patch alsa-lib was built before libv4l:
checking for ALSA... yes
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default position independent executables (PIE) are generated
when building U-Boot elf target. MetaWare debugger doesn't support
PIE (position-independent executable).
In order to allow MDB load and run U-Boot elf, we need to do a
special trick, called "mdbtrick".
This special build target is used to fake generated U-Boot elf by:
1. Reset PIE flag in ELF header
2. Strip all debug information from elf
Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support to compile Xen 4.6 and Xen tools for arm32 and arm64
targets.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas:
- Remove all "select" from the main Xen option, since the hypervisor
can build fine without any additional library. The dependencies have
been moved to the "tools" sub-option.
- Make sure that at least one of the sub-option is enabled by selecting
the hypervisor sub-option if the tools sub-option is not enabled.
- Add a Config.in comment about the dependencies of the Xen tools.
- Add missing dependency on argp-standalone in the .mk file.
- Simplify the handling of XEN_INSTALL_TARGET_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add basic support for LinkSprite pcDuino board series
including pcDuino, pcDuino-Lite, pcDuino-Lite-WiFi.
Tested on pcDuino-Lite-WiFi.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 5f37843a (php.ini: set date.timezone), the configured timezone was
used as the default for PHP.
However, BR2_TARGET_LOCALTIME is a string, so is quoted, so it is never
empty, so the check for emptynessnever matches.
Fix that by q-stripping the value before testing it. Note however that
we do not q-strip it before storing it in the php.ini file, because it
has to be q-stripped in there.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A Linux user-space application to modify the Intel Extensible Firmware
Interface (EFI) Boot Manager. This application can create and destroy
boot entries, change the boot order, change the next running boot
option, and more.
The only issue found was that it was trying to include headers from the
host, so $(STAGING_DIR) has been prepended to the include path so that
the package finds the right headers.
efibootmgr depends on the libraries provided by efivar.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- change the "depends on" for efivar to a "select", and propagate the
relevant dependencies.
- the license is GPLv2+, not GPLv2.
- move the Makefile tweak to a post-patch hook rather than doing it as
part of the build step.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar contains tools and libraries to manipulate EFI variables.
This package has some restrictions to build. It needs uchar.h which
apparently does not come in uClibc, and it also needs
__bswap_constant_*() definitions which are only present in glibc.
So, this package was limited to build with glibc toolchains.
Although it probably makes sense mostly on x86, x86-64 and aarch64
architectures, there are no architecture specific limitations which
would prevent it to build for other architectures, so this restriction
was not imposed. This package has been build-tested additionaly on many
architectures which support glibc, such as mips, MicroBlaze, sparc64,
ppc64. There were some build flag issues found when building to some of
these some architectures, although the flags can be also added in the
general case, so they were added by default.
It has also been found that in some host systems it failed to build due
to not generating the .pc files. This has been tracked to the use of
make 3.81, so a patch was prepared for it and was submitted upstream.
There's also a dependency on the linux/nvme.h header, which is somewhat
conturbed, as it has appeared in user space linux headers 3.12 and in
4.4 it was renamed. This has been solved by restricting it to build with
linux headers >= 3.12 and a patch from upstream was picked which fixes
it for linux headers >= 4.4.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas:
- Pass TARGET_LDFLAGS in LDFLAGS.
- Pass -shared-libgcc only on Microblaze.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Domoticz is a Home Automation System that lets you monitor and
configure various devices like: Lights, Switches, various
sensors/meters like Temperature, Rain, Wind, UV, Electra, Gas, Water
and much more. Notifications/Alerts can be sent to any mobile device.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an upstream qtbase commit that fixes the detection of
ALSA versions >= 1.1.x, as we have in Buildroot.
Signed-off-by: Jiri Novotny <jiri.novotny@logicelements.cz>
[Thomas: change to use the upstream commit directly, using <pkg>_PATCH.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The endianess of the Linux kernel should be based on BR2_ENDIAN, so that
it is automatically built for the right endianness.
Signed-off-by: Ofer Heifetz <oferh@marvell.com>
[Thomas: tweak commit message, add comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some wireless drivers report IW_MODE_AUTO instead of IW_MODE_MANAGED.
NetworkManager 1.0.12 introduced a change, which makes it skip such
interfaces.
This patch is a backport of a workaround for this problem from the
NetworkManager upstream.
Signed-off-by: Ilya A. Volynets-Evenbakh <ilya@total-knowledge.com>
[Thomas: add reference to the upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Damien Lanson <damien@kal-host.com>
[Thomas:
- Rewrap Config.in help text.
- Add missing new line at the end of the Config.in help text.
- Use 80 # signs for the .mk file header.
- Use <pkg>_SUBDIR = log4cpp instead of moving things around during the
extract step.
- Fix typo in the license (it's LGPL, not GLPL), and make it LGPLv2.1+,
since it's what the HTML documentation says.
- In addition to removing the log4cpp-config script from the target,
tweak the variant installed in staging so that it behaves properly
for cross-compilation. Unfortunately, the <pkg>_CONFIG_SCRIPTS
generic mechanism doesn't work for this config script.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.6.2 contains commit 63d0430f991314 ("drm/imx: Match
imx-ipuv3-crtc components using device node in platform data")
that fixes IPUv3 probing, so bump to this kernel version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.6.2 contains commit 63d0430f991314 ("drm/imx: Match
imx-ipuv3-crtc components using device node in platform data")
that fixes IPUv3 probing, so bump to this kernel version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch:
* bumps openjpeg to version 2.1
* changes download location to github
* converts the package to use cmake
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
ESNET-SECADV-2016-0001 - A malicious process can connect to an iperf3
server and, by sending a malformed message on the control channel,
corrupt the server process's heap area. This can lead to a crash (and a
denial of service), or theoretically a remote code execution as the user
running the iperf3 server. A malicious iperf3 server could potentially
mount a similar attack on an iperf3 client.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4971 - By default, on server redirects to a FTP resource, use
the original URL to get the local file name.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- disable the tracing mechanism using --disable-vt, since it was
causing the build failure. Avoids the need for a patch.
- remove the option to pass arbitrary config options.
- specify the license as being BSD-3c instead of just BSD.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fetch a patch from upstream to fix a build issue with GCC 6:
'''
In file included from /home/joerg/Development/git/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/include/c++/6.1.0/bits/stl_algo.h:59:0,
from /home/joerg/Development/git/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/include/c++/6.1.0/algorithm:62,
from ./src/queue/IdTable.hxx:25,
from ./src/queue/Queue.hxx:24,
from src/queue/Playlist.hxx:23,
from src/Partition.hxx:23,
from src/Instance.cxx:22:
/home/joerg/Development/git/buildroot/output/host/usr/arm-buildroot-linux-gnueabi/include/c++/6.1.0/cstdlib:75:25: fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
'''
Bug report: https://bugs.musicpd.org/view.php?id=4524
Fetch from: aa5d05eaa4d482aa8f8df954335d0aba151eeff9
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
[Thomas:
- Adjust license: it is "GPLv2+ or BSD-2c" and not "GPLv2, BSD-2c"
- Add the COPYING file to the license files, since it indicates
explictly that the license is GPLv2+ or BSD-2c.
- Remove the --with-shared configure options, which doesn't exist.
- Use LIBCOAP_AUTORECONF = YES instead of calling the autogen.sh script
manually.
- Add patch to fix build with old gcc versions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to a typo in commit
a890032596 ("package/fetchmail: fix *.pyc
compilation with python-3"), the post install target hook was in fact
not registered, and the build failure kept showing up.
This commit fixes the typo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils got disabled as a target package for aarch64 back in Buildroot
2012.11 (commit 660d16f4).
The default version 2.21.1 at the time didn't really support aarch64, as
shown by the autobuilder error reference in that commit.
binutils has now had support for aarch64 since 2.23, but was never
re-enabled for aarch64.
All of the binutils versions currently supported by Buildroot (oldest
being 2.24) support aarch64, so we can now enable it without any
restrictions.
This same patch also touches the dropwatch, lightning and oprofile
packages which all select binutils and had the 'depends on !aarch64' to
keep Kconfig consistent. They are now re-enabled for aarch64 as well.
They are changed in this same patch so that Kconfig is kept consistent
and doesn't end up having them disabled in a commit which only has the
binutils change applied.
lightning has other explicit arch dependencies so it is not actually yet
available in aarch64, but at least the dependency on !aarch64 because of
binutils is not needed anymore.
Everything has been build tested with Buildroot and external toolchains.
binutils and dropwatch work fine in a qemu target. oprofile doesn't seem
to be supported in the qemu aarch64 processor but builds fine and seems
to have some level of aarch64 support in the source, so there doesn't
seem to be a reason to keep it disabled in Kconfig.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 500de2598a, support for eglibc
was removed, but forgot to remove the corresponding hashes from the hash
file. This commit fixes this mistake.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new configuration for NXP i.MX51 EVK based on U-boot 2016.05
and kernel 4.6.1.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f1bc98f396 the CFG_BUILD_KERNEL_STACK
option wasn't set when the PCIe library interface is selected.
The build fail since the default choice "Link to Application" (which require
libpcap) is used.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5.6 2.5.0 YES OK (4)
arm_versatile 4.6.1 2.5.0 YES OK
arm_vexpress 4.6.1 2.5.0 YES OK
m68k_mcf5208 4.6.1 2.5.0 YES OK
m68k_q800 4.6.1 q800-v2.4.0 NO (3) OK
microblazebe 4.6.1 2.5.0 YES OK
microblazeel 4.6.1 2.5.0 YES OK
mips64el_malta 4.6.1 2.5.0 YES OK
mips64_malta 4.6.1 2.5.0 YES OK
mipsel_malta 4.6.1 2.5.0 YES OK
mips_malta 4.6.1 2.5.0 YES OK
ppc_g3beige 4.6.1 2.5.0 YES OK
ppc_mpc8544ds 4.6.1 2.5.0 YES OK
ppc_virtex_ml507 4.6.1 2.5.0 NO OK
ppc64_pseries 4.6.1 2.5.0 YES OK
sh4 4.6.1 2.5.0 YES OK
sh4eb 4.6.1 2.5.0 NO (1) OK
sparc_ss10 4.6.1 2.5.0 YES OK
sparc64_sun4u 4.6.1 2.5.0 YES OK
sparc_sun4u 4.6.1 2.5.0 YES OK
x86 4.6.1 2.5.0 YES OK
x86_64 4.6.1 2.5.0 YES OK
xtensa_lx60 4.6.1 2.6.0 YES OK (2)
xtensa_lx60_nommu 4.6.1 2.6.0 YES OK (2)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - Linux 4.5/4.6 doesn't work with older Qemu versions
(3) - There's a network interface, but enabling it in qemu fails
(4) - Console looks dead in 4.6
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It now requires 3.12.x series headers so adjust the dependencies to
match.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
WNPA-SEC-2016-29 - The SPOOLS dissector could go into an infinite loop.
WNPA-SEC-2016-30 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-31 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-32 - The UMTS FP dissector could crash.
WNPA-SEC-2016-33 - Some USB dissectors could crash.
WNPA-SEC-2016-34 - The Toshiba file parser could crash.
WNPA-SEC-2016-35 - The CoSine file parser could crash.
WNPA-SEC-2016-36 - The NetScreen file parser could crash.
WNPA-SEC-2016-37 - The Ethernet dissector could crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only enabled on a subset of known-working architectures.
It fails to build on some archs, like blackfin.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- Add comment about the Blackfin exception.
- Propagate the Blackfin exception to the Config.in comment.
- Fix the license, it is the LGPLv2.1+ *with* the unRAR restriction.
- Use $(INSTALL) -D -m 0755 to install the binary instead of cp.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Code is otherwise compiled with sparcv9 optimization and
cannot be run on sparc32 (sparcv8) machine.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Codescape toolchain uses a sysroot layout that places them
side-by-side instead of nested like multilibs. A symlink is needed much
like for the nested sysroots which are handled in copy_toolchain_sysroot
but there is not enough information in there to determine whether the
sysroot layout was nested or side-by-side.
For the above reason plus the fact that this is the only toolchain
needing this, better to handle that symlink creation using a hook which
will be executed only when that toolchain is selected.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 9a1e9efe26.
Currently Codescape toolchains cannot be used to generate a big endian
root file system because the support for side by side sysroots is not
complete.
There is a patch [1] waiting in the queue which fixes the issue for the
current version of Codescape toolchains we have, but it will not work
for the next one that is coming. So, instead of messing more with the
toolchain infra I think it's better to handle these specific Codescape
toolchain's weirdness in hooks which won't affect others.
[1]: http://patchwork.ozlabs.org/patch/571708/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We directly running this script, so it should start with a sha-bang (not
sure why/how it works today...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix several issues regarding the support for Flat Image Trees (FIT).
- Add a patch to really allow turning FIT support on/off, which was not
possible due to bugs in the code and in the tools Makefile. This patch
has been sent upstream but not applied there, yet.
- Use independent options to control FIT support on host and target
packages.
- Subordinate FIT signature support to the activation of FIT support, in
the target package, not to mkimage installation.
- Add a dependence on the dtc utilities because mkimage needs it when
FIT is enabled; otherwise mkimage fails like this:
$ mkimage -f firmware.its firmware.im
sh: dtc: command not found
- Add BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT to the
Config.in.legacy file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When that was added (in 975e30b, fs/squashfs: fix image file
permissions), the reasons were not quite explicit.
We are now forcing the umask, and various tests have shown that the mode
on the generated image file are correct without the chmod.
Remove it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the squashfs image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can properly printf a multi-line command, there is no need
to use a single command to gnerate the jffs2 image.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases we need to escape make variables and pass them to
printf(1).
This is the case in our fs infra, where we want to shoe-horn the
commands to generate the filesystems in the fakeroot script, or the
devices, permissions and users tables to their respective files.
We currently do so by replacing $(sep) with the literal '\n' but that's
not enough. This does not protect against strings with an embedded '%'
or a backslash.
Add a new macro that properly escapes a string and calls printf(1), so
that we get the expected output.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that the uclibc-menuconfig rule was guarded behind
BR2_TOOLCHAIN_BUILDROOT, which is wrong since we can build
glibc or musl toolchains too...
This is de facto fixed by moving the help text to the uClibc package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: don't use the helper.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all our internal packages provide actions that are prefixed
with their own names. This makes it obvious what package the action
refer to.
However, the help commands are really free-form. This means that
packages (and especially packages from a br2-external tree) may provide
completely arbitrary help text.
As such, all that text can get pretty easily mixed up, and it will be
very difficult to read.
Prefix each package-specific help text with the name of the package it
refers to. This generate a "make help" that looks like:
[...]
Package-specific:
<pkg> - Build and install <pkg> and all its dependencies
<pkg>-source - Only download the source files for <pkg>
<pkg>-extract - Extract <pkg> sources
<pkg>-patch - Apply patches to <pkg>
<pkg>-depends - Build <pkg>'s dependencies
<pkg>-configure - Build <pkg> up to the configure step
<pkg>-build - Build <pkg> up to the build step
<pkg>-graph-depends - Generate a graph of <pkg>'s dependencies
<pkg>-dirclean - Remove <pkg> build directory
<pkg>-reconfigure - Restart the build from the configure step
<pkg>-rebuild - Restart the build from the build step
busybox:
busybox-menuconfig - Run BusyBox menuconfig
busybox-nconfig - Run BusyBox nconfig
barebox:
barebox-menuconfig - Run barebox menuconfig
barebox-savedefconfig - Run barebox savedefconfig
linux:
linux-menuconfig - Run Linux kernel menuconfig
linux-savedefconfig - Run Linux kernel savedefconfig
linux-update-defconfig - Save the Linux configuration to the path specified
by BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE
Documentation:
manual - build manual in all formats
manual-html - build manual in HTML
[...]
(Note: busybox, barebox, linux help will be converted in followup
commits, they are represented here as an example of what this patch
does look like.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a package-variable to store the package-specific make rules.
Although this variable would be seldom used, we still document it.
However, we make sure the documentation explicitly states that this
variable should not be used (if it needs to be, the submitter of a
package will be told so during reviews).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mplayer has optional support for mpg123, to get reproducable builds
add mpg123 as optional dependency.
Linked libraries without this patch:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/mplayer | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [librt.so.1]
0x0000000000000001 (NEEDED) Shared library: [libpthread.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libm.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Linked libraries after this patch:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/bin/mplayer | grep NEEDED
0x0000000000000001 (NEEDED) Shared library: [librt.so.1]
0x0000000000000001 (NEEDED) Shared library: [libmpg123.so.0]
0x0000000000000001 (NEEDED) Shared library: [libpthread.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libm.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
Like with many other optional libraries detection of mpg123 is broken if
--enable-mpg123 is passed to configure leading to a build error:
libmpcodecs/ad_mpg123.o: In function `set_format':
ad_mpg123.c:(.text+0x63): undefined reference to `mpg123_getformat'
libmpcodecs/ad_mpg123.o: In function `decode_a_bit':
ad_mpg123.c:(.text+0x1b6): undefined reference to `mpg123_feed'
ad_mpg123.c:(.text+0x20e): undefined reference to `mpg123_replace_buffer'
ad_mpg123.c:(.text+0x223): undefined reference to `mpg123_decode_frame_64'
ad_mpg123.c:(.text+0x275): undefined reference to `mpg123_strerror'
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently selected version of U-Boot fails to compile.
Dying words are:
gcc -g -O2 -I/home/zeta/buildroot/buildroot/output/host/usr/include -c -o env_embedded.o /home/zeta/buildroot/buildroot/output/build/uboot-2013.10/common/env_embedded.c
/home/zeta/buildroot/buildroot/output/build/uboot-2013.10/lib/crc32.c:14:20: fatal error: common.h: No such file or directory
compilation terminated.
Makefile:258: recipe for target 'crc32.o' failed
Since it's quite old, instead of trying to fix it, let's
just upgrade.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas: added host dosfstools to the defconfig, needed to build a SD
card image with genimage when a FAT partition is listed in the
genimage configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need for GNU make to run the testsuite.
The benefit is you can even try it on noMMU targets as
the script runs with busybox hush.
Parallel build of the testsuite seems to work well.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Build failed when "makeinfo" was missing on the build host.
This was happening because "makeinfo" is required to build .info targets
and make exited with error. The issue hadn't appeared before as there was
prebuilt documentation in ARC binutils tarballs, so no attempts had been
made to build docs.
Missing "makeinfo" only stops us from building docs
("missing" script already throws a warning on that regard).
Let's continue to build other targets.
Now exit code of the script called "missing" is checked.
The value 127 means that "makeinfo" is not available on the build host.
So when such value occurs, 0 is returned to the top level makefile.
Documentation is not being built but further build of binutils continues.
Fixes http://autobuild.buildroot.net/results/55c/55cd09a559016f4f252f0e4c27313b9806135cf4//
Signed-off-by: Zakharov Vlad <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove upstream patches and rebase all remaining patches.
Disable PCIe MN library by default, it will be added in a follow up patch.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Latest uClibc-ng 1.0.15 release fixed open issues with
microblaze shared library and linuxthreads support.
gcc 4.9.3 and gcc 5.3.0 require a small patch.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have two choices for the server's version (1.18.3, and 1.14.7)
but the following patch will only apply for versions >= 1.17.2.
If 1.14.7 is selected the build will fail with the following error:
Applying 0001-modesettings-needs-dri2.patch using patch:
patching file configure.ac
Hunk #1 FAILED at 2036
So move this patch to an appropriate version folder in the package's
directory. It should be good enough until this package provides more
versions >= 1.17.2.
Signed-off-by: Stanislas Bach <sbach@0g.re>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds CMA to the juno's default kernel config that is in
board/arm/juno. This is critical if the user decides to config video
resolution to 1920x1080.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two new sample defconfigs oriented towards real PC targets.
It adds two variants for BIOS and EFI boot strategy.
On the build side we enable eudev to autoload relevant kernel
modules/support when necessary.
It adds a bunch of drivers and extra filesystem support which is by no
means extensive/complete, mostly geared towards the hardware i've got at
hand to test with.
This is accomplished by adding on top of the Qemu x86_64 kernel sample
config.
Build connman since by using eudev network interfaces get renamed on
boot thus complicating any form of automatic and friendly bringup.
It also makes Wi-Fi configuration/support easier.
In principle these base defconfigs should work just fine for other
storage media != pendrive like sata or ssd disk, however driver support
isn't there quite yet, and pendrive is mostly supported by usb storage
plus the usual usb host controller drivers.
Tested on old Lenovo laptop (BIOS) and Asus Zenbook (EFI).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OMXplayer uses openMAX on the RPi to play videos with hardware
acceleration.
Compared to using a gstreamer pipe, OMXplayer uses a complete
"tunnel-mode", in which the video is piped (after demuxing) into the
hardware, all the way down to the display, whereas gstreamer composes
the video using the eglgles sink, which uses mem-to-mem copies.
So, when playing a locally-stored 1080p video, OMXplayer averages 20%
(with peaks up to ~30%, depending on the complexity of the video) CPU,
while gstreamer bursts up to 40+% when playing 720p and totally chokes
on a 1080p video; all on an non-overclocked RPi-1.
Note that we have to depend on rpi-userland. rpi-userland is a GLES/EGL
provider, so it can't be selected (as all providers of a virtual package
can't).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add a depends on BR2_PACKAGE_FFMPEG_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- remove useless 'depends on' on toolchain features, since we now
depend on bluez_utils/neard
- remove the QT5CONNECTIVITY_INSTALL_TARGET_QMLS variable, and directly
use QT5CONNECTIVITY_INSTALL_TARGET_BLUETOOTH_QMLS and
QT5CONNECTIVITY_INSTALL_TARGET_NFC_QMLS in
QT5CONNECTIVITY_INSTALL_TARGET_CMDS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the official upstream has not published any new tarball, they
have continued to update their Subversion repository with additional
changes. This commit therefore updates the vpnc package to a newer
version, using the Github repository that replicates the original
Subversion repository.
Since the update required some updates to the patches, we took this
opportunity to split them in more fine-grained changes, and document
them more properly. Consequently:
- The patch 0001 that fixes the Makefile gets split into 3 patches,
0001, 0002 and 0003, each for one specific issue.
- Patch 0002 to disable building the manpages gets changed into a
solution that is potentially upstreamable, and is now patch 0004.
- A new patch 0005 is added to specify a custom libgcrypt-config
path, since this tool is now used to know how to link with
libgcrypt.
- The SUSv3 function removal patch is now patch 0006, and gains a
better commit log.
Also, this vpnc version now depends on gnutls, which basically is a
better replacement for OpenSSL, whose support was not enabled by
default due to licensing issues (vpnc is under the GPL, which isn't
compatible with the OpenSSL license).
Patches have been submitted upstream:
http://lists.unix-ag.uni-kl.de/pipermail/vpnc-devel/2016-June/004186.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The V4L2 module of gst-plugins-good provides an extra option to allow
probing for extra devices at plugin load time. This will enable features
such as video conversion using the V4L2 M2M api
Signed-off-by: Kieran Bingham <kieran@bingham.xyz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change download location and rework dependencies, i.e.
select Python's zlib support and python-click package
and remove unneeded build-time dependencies.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With uClibc-ng 1.0.15 sparc support got context functions.
Tested with qemu-system-sparc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that uClibc-ng 1.0.15 is in use, we can reenable
this package as context functions are available.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linuxthreads support got reorganized.
LT.new is removed, LT.old is the default for
Linuxthreads.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They were differences against Das U-Boot versions 2015.07 and 2015.04.
Generating again helps to apply them with "git am".
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the descriptions of the knobs to install mkimage, mkenvimage,
dumpimage, fw_printenv and fw_setenv.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to enable GDB simulator support, so
it can be used to test some no-MMU systems.
Newer GDB Blackfin Simulator need a workaround for in-tree compile.
It doesn't break for older Buildroot supported GDB Blackfin
Simulator.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow multiple file names to be listed in
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, concatenating them in the order
listed.
This allows the bulk of the environment to be shared across multiple
boards using a common environment file with board-specific values
supplied in a secondary environment source file.
Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: adjust indentation in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit ab74e09eb4 renamed the dtc host tool
provided by linux to linux-dtc to avoid clashes with the dtc host tool
provided by host-dtc.
However, external scripting may well rely on the existence of a device tree
compiler as $(HOST_DIR)/usr/bin/dtc, regardless of its source. Changing
these external scripts to use linux-dtc means that the scripts need to be
aware of the buildroot release they are working with, which is not very
nice.
Add a symlink dtc->linux-dtc when no $(HOST_DIR)/usr/bin/dtc is present.
When host-dtc is not enabled, the end result will be dtc and
linux-dtc representing the same thing.
When host-dtc is enabled, either it is build before linux and no symlink
is created at any time, or it is build after linux, and the 'install'
command in host-dtc will overwrite the symlink with a proper dtc. In both
cases, the end result will be dtc and linux-dtc representing a different
thing.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mtools calls install-info at 'make install' time if available after
installing the mtools info page - But as we don't use the info pages for
anything / remove in target-finalize, this is a waste of time and a
potential cause of build failures as reported on the list:
http://lists.busybox.net/pipermail/buildroot/2016-May/160604.html
So ensure configure doesn't find it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Many lines are not correctly wrapped to 72 column width, so rewrap them.
In addition, standardize all instances of ". " to ". ".
Signed-off-by: Martin Kelly <martin@surround.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-boot to the 2016.05 version and the kernel to 4.6.
U-boot 2016.05 needs the patch c510f2e436008 ("video: ipu_common: fix build
error") that is already in mainline to fix an IPU build error.
We can remove this patch in the future when we switch to U-boot 2016.07.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mesa3d doesn't like the new compressed exception handling of the Code
Sourcery MIPS toolchain and it fails to compile with an error like this
one:
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/5.3.0/../../../../mips-linux-gnu/bin/ld:
../../../../src/mesa/.libs/libmesagallium.a(ir_to_mesa.o):
.eh_frame_entry not in order
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/5.3.0/../../../../mips-linux-gnu/bin/ld:
final link failed: Nonrepresentable section on output
collect2: error: ld returned 1 exit status
Using -mno-compact-eh fixes the problem.
Fixes:
http://autobuild.buildroot.net/results/3cd/3cd81c57c51c0963ee6f4d9b814989460bb35316/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: improve comment in code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-8872 - if the third to last entry was written on a FAT12
filesystem with an odd number of clusters, the second to last entry
would be corrupted. This corruption may also lead to invalid memory
accesses when the corrupted entry becomes out of bounds and is used
late.
CVE-2016-4804 - the variable used for storing the FAT size (in bytes)
was an unsigned int. Since the size in sectors read from the BPB was not
sufficiently checked, this could end up being zero after multiplying it
with the sector size while some offsets still stayed excessive.
Ultimately it would cause segfaults when accessing FAT entries for which
no memory was allocated.
Converted package to autotools infra to match upstream.
The install options are now removals, enabled compatibilty symlinks and
exec-prefix set to / to match previous install names/locations.
Accounted for optional udev usage.
Dropped musl compatibility patch since it's upstream.
Add upstream patch to keep sectors a multiple of sectors per track since
it makes mtools cranky.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 2a87b64 (toolchain-external: align library locations in target and
staging dir), copying the libraries from the sysroot to the target was
changed to a simple find-based solution.
To be sure that the staging directory was entered to find the libraries,
in case the variable was pointing to a symlink, the -L clause to find
was used.
However, that causes extraneous libraries to be copied over.
For example, a ct-ng toolchain would have this sysroot (e.g for an arm
32-bit toolchain):
.../sysroot/lib/
.../sysroot/lib32 -> lib
.../sysroot/lib64 -> lib
.../sysroot/usr/lib/
.../sysroot/usr/lib32 -> lib
.../sysroot/usr/lib64 -> lib
Which we would carry as-is to our own sysroot.
But then, in target, our skeleton creates the /lib/ and /usr/lib
directories, with the necessary lib32 or lib64 symlink pointing to it.
In this case, a lib32->lib symlink is created, but no lib64 symlink
since this is a 32-bit architecture.
To copy the required libraries from staging into target, we scan the
staging directory for all occurences of the required libraries, and copy
them over to target, keeping the same directory layout relative to the
sysroot.
For example:
.../sysroot/usr/lib/libfoo.so --> .../target/usr/lib/libfoo.so
.../sysroot/usr/lib32/libbar.so --> .../target/usr/lib32/libbar.so
.../sysroot/usr/lib64/libbuz.so --> .../target/usr/lib64/libbuz.so
So, when we copy over the libraries from our staging to the target
directory, the "find -L .../sysroot -name libblabla.so.*" would find
multiple instances of libblabla, each in the /usr/lib /usr/lib32 and
/usr/lib64 locations (they are all the exact same file, though).
Since we do have the /usr/lib32->lib symlink, all is OK (but there are
two copies going on, which could be avoided). However, since we do not
have the /usr/lib64->lib symlink, the /usr/lib64/ directory is created.
This was very difficult to observe, as no /lib64/ directory is created,
only the /usr/lib64/ one was. To top it off, this only happens with a
merged /usr, which does not seem like not a common case without systemd.
Since the reason to use -L was to be sure to enter our staging
directory, we just need to ensure that the path ends up with a slash, as
was already talked about in this thread:
http://lists.busybox.net/pipermail/buildroot/2016-April/159737.html
After further discussion, it turns out that the original patch came along
because of the confusion between output/staging (which is a symlink) and
$(STAGING_DIR) which expands to output/host/usr/<tupple>/sysroot (which is
never a symlink), so the symlink handling isn't really needed at all.
[Peter: drop description comment, extend description]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Compilation triggers an ICE in gcc with gcc 4.9
../db/dist/../lock/lock_deadlock.c: In function '__lock_detect_rpmdb':
../db/dist/../lock/lock_deadlock.c:354:1: internal compiler error: Segmentation fault
}
^
using this defconfig
BR2_sh=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_RPM=y
Compiling rpm with gcc5 works fine using this defconfig:
BR2_sh=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_GCC_VERSION_5_X=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_RPM=y
This patch adds a dependency to gcc >= 5.x to fix
http://autobuild.buildroot.net/results/e4b/e4b7705e3e148755ae34d498c860a3b9b915e0b0/
[Peter: simpify kconfig, add comment explaining why]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Free software library that interfaces with selected Z-Wave PC
controllers, allowing anyone to create applications that manipulate and
respond to devices on a Z-Wave network, without requiring in-depth
knowledge of the Z-Wave protocol
[Peter: also pass DOXYGEN=, add _MAKE_OPTS and use for build+install]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves the handling of the "atomic stuff" in the libdrm
package. libdrm can either use the atomic intrinsics (4 byte variant)
when available, or otherwise can use libatomic_ops. Note that the
dependency on atomic operations is not from libdrm itself, but only
from some specific DRM drivers only.
Amongst other things, it fixes the build of the libdrm package on
SPARCv8, therefore fixing:
http://autobuild.buildroot.org/results/74dd29b5ea146c320fde80a87a2fc910de9b7f60/
This commit does a number of changes that are all related to each
other:
- Removes the dependency of the Intel DRM driver on
libatomic_ops. The Intel DRM driver builds perfectly fine without
libatomic_ops, as long as 4-byte variant __sync operations are
available, which is always the case on x86 and x86_84 (which are
the only architectures on which the Intel DRM driver can be
enabled).
- Adds an hidden Config.in boolean option
BR2_PACKAGE_LIBDRM_HAS_ATOMIC that allows DRM driver that need
atomic operation to know whether atomic support is available
(either through intrinsics or through libatomic_ops).
- Adds an hidden BR2_PACKAGE_LIBDRM_ENABLE_ATOMIC Config.in option
that DRM drivers that need atomic operation should select to ensure
that the relevant dependencies are selected. It simply selects
libatomic_ops if 4-byte atomic intrinsics are not available. We
could let each DRM driver do this, but having an intermediate
option avoids a bit of duplication.
- Adds a patch that defines AO_REQUIRE_CAS before including
<atomic_ops.h>. This is needed because libdrm uses the
AO_compare_and_swap_full() which is only provided on all
architectures when AO_REQUIRE_CAS is defined. The exact same fix
was done in the erlang package in commit
4a9df29424.
- Adds the dependency on libatomic_ops when the package is enabled,
and passes the necessary CFLAGS on SPARCv8 to make the thing build
properly. The same CFLAGS are passed in the nginx package and bdwgc
package.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is basically the same change as in 0515fe4566
("Makefile: pass host PKG_CONFIG_PATH at "make menuconfig" time"). That
commit made sure to pass host PKG_CONFIG_PATH when invoking Buildroot's
own menuconfig program. This change ensures that the same is true for
third party menuconfig programs (i.e. Linux, uClibc and Busybox).
This unbreaks "make {linux,uclibc}-menuconfig" for host platforms which
rely on PKG_CONFIG_PATH to find .pc files (e.g. NixOS). (When Busybox
updates to a more recent Kconfig snapshot, one that uses pkg-config to
find ncurses, "make busybox-menuconfig" will also start working.)
Tested on Ubuntu and NixOS:
$ make qemu_arm_versatile_defconfig
$ make linux-menuconfig
$ make
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package introduces batman-adv, a kernel module implementation of
the B.A.T.M.A.N. IV and V mesh network routing protocols.
While batman-adv exists in the mainline kernel tree, it can also be
built as an external out-of-tree module. This package adds the
flexibility to chose a more up to date version of the module than exists
in the official tree, and also allows for compilation against kernels
without batman-adv in-tree support.
https://www.open-mesh.org/projects/batman-adv/
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas:
- remove "default n", since it's the default
- fix indentation of Config.in help text
- license is GPLv2, not just GPL
- remove variable BATMAN_ADV_MAKE_OPTS, name it directly
BATMAN_ADV_MODULE_MAKE_OPTS as this is what is expected by the kernel
module infrastructure.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
__P() is used for compatibility with old K&R C compilers. With
ANSI C this macro has no effect.
Unlike for util-linux and ipkg packages where it was easy to remove
each __P() macro, ipsec-tools use it all over the tree and require a
"big" patch to enable musl support.
Since upstream seems not verry active (last release 2014-02-27)
So, disable ipsec-tools with musl based toolchains.
This fixes a compilation error with musl libc because of undeclared
__P.
Fixes:
http://autobuild.buildroot.net/results/42242e3f4485b9e77a916e6fe480c83f70e024e4
While at it, reorder "depends on" and "select" lines in Config.in
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 5c67cb1d04 ("linux: use zImage by default on ARM") changed
the default kernel image, but missed to update Zynq defconfigs.
U-Boot on Zynq boards still loads uImage, so BR2_LINUX_KERNEL_UIMAGE
should be defined to generate uImage.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be a little bit misleading to have no init system...
Add a comment that states the user has to provide his own init system,
either via a package or a rootfs overlay.
It is expected that such a user will know what to provide, so we don't
really need to specify that it should be /init or /sbin/init or any
arbitrary executable pointed to by the kernel command line "init=..."
or anything else...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed 0001-cmake-use-the-standard-CMake-flag-to-drive-the-share.patch,
a similar patch was committed upstream:
ea55c8b5c1
Also remove empty line from Config.in.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mplayer configure script tries to detect the capabilities of the CPU
used by probing the host CPU. This leads to compilation failures if the
target CPU has lesser features, like missing mmx support for
BR2_x86_i686=y:
Checking for CPU vendor ... GenuineIntel (6:58:9)
Checking for CPU type ... Intel(R) Core(TM) i7-3770S CPU @ 3.10GHz
Checking for kernel support of sse ... yes
Checking for kernel support of sse2 ... yes
Checking for kernel support of sse3 ... yes
Checking for kernel support of ssse3 ... yes
Checking for kernel support of sse4_1 ... yes
Checking for kernel support of sse4_2 ... yes
Checking for kernel support of avx ... yes
For this patch I copied most of ffmpeg configure options for x86 CPUs
because mplayer contains its own copy of ffmpeg.
Fixes
http://autobuild.buildroot.net/results/c5a/c5a722607ec9797c317b63b0fd3235608a340c98/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, each python package (be it the python interpreter package
itself or external python modules) is responsible for compiling its
.py into .pyc files. Unfortunately, this is not ideal as some packages
only install .py files without compiling them into .pyc files. In this
case, if the Buildroot configuration specifies to keep only the .pyc
files, the .py files are removed and lost.
To address this, this commit changes the logic by making the
compilation of .pyc files a global operation: the python interpreter
packages register a target finalize hook that is in charge of
compiling all installed .py files.
The *.pyc generation on a per package basis is disabled in the
python-package infrastructure by passing the "--no-compile" option to
setup.py.
The *.pyc generation for the Python interpreter internal modules is
disabled through --disable-pyc-build configure option.
A small helper script is used to perform the compilation, the purpose
of this script is to abort the compilation process if one of the .py
file cannot be compiled. It has been provided by Samuel Martin and
integrated into this commit.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- rework for python 3.5
- integrate Samuel proposal that allows to detect compilation
failures.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumpds the version of python-pyftpdlib to fix a
byte-compilation problem occuring with Python 3. The current version of
pyftpdlib contained a file that had mistakenly been added to the
release, and which wasn't Python 3 compliant. The new 1.5.1 version has
been released specifically to address this problem, see:
https://github.com/giampaolo/pyftpdlib/issues/381
Until now, this wasn't causing any problem as a byte-compilation problem
was not a fatal failure. But upcoming commits will make it a fatal
failure, so it needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Samuel Martin, this commit adds the option
--no-run-if-empty xargs option to the "find ... | xargs ..." logic used
in the python and python3 target-finalize hooks to remove py/pyc/pyo
files. This ensures that the command doesn't fail if there are no files
matching the pattern.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently even if -pie flag is provided to LD dynamic relocations
won't be created. That in its turn will break U-Boot self-relocation
functionality.
This fix resolves mentioned problem.
Note as of today this is a sort of off-the-tree patch right from
our binutils guy but in coming day similar fix will be applied to
upstream binutils as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MIPS architecture detection is not accurate and is always detected as
mips64 even if we are using mips64r2 or mips64r6. Due to that, ffmpeg's
build system will pass the -mips64 flag which will conflict with the
-march option that our toolchain wrapper uses, and it will fail to build
showing errors like this one:
error: '-mips64' conflicts with the other architecture options, which
specify a mips64r2 processor
This problem has been already fixed upstream, but we would need to
backport 17 patches plus some changes in the ffmpeg.mk file. This is too
much, so better to just disable ffmpeg for mips64r2 and mips64r6 for the
upcoming Buildroot release.
This commit can be reverted in the next ffmpeg's version bump.
Fixes:
http://autobuild.buildroot.net/results/7fd/7fd8187c0110cdcac622e667f4a81d2db84f11ef/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using double quotes around TARGET_CC/TARGET_CXX is mandatory, since
they are composed of several words when ccache support is enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set all file timestamps to prevent the go compiler from rebuilding any
built in packages when programs are built.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The go compiler's cgo support uses threads. If BR2_TOOLCHAIN_HAS_THREADS is
set, build in cgo support for any go programs that may need it. Note that
any target package needing cgo support must include
'depends on BR2_TOOLCHAIN_HAS_THREADS' in its config file.
Fixes build errors like these:
error: #warning requested reentrant code
http://autobuild.buildroot.net/results/42a8d07101d8d954511d1c884ecb66e8d861899e
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the newly added HOST_GO_TARGET_ENV variable to pickup the
correct go environment for package builds.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the convenience of package makefiles define the new
make variables HOST_GO_TOOLDIR and HOST_GO_TARGET_ENV.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The go build system doesn't have the notion of cross compiling, but just the
notion of architecture. When the host and target architectures are different
it expects to be given a target cross compiler in CC_FOR_TARGET. When the
architectures are the same it will use CC_FOR_TARGET for both host and target
compilation. To work around this limitation build and install a set of
compiler and tool binaries built with CC_FOR_TARGET set to the host compiler.
Also, the go build system is not compatible with ccache, so use
HOSTCC_NOCCACHE. See https://github.com/golang/go/issues/11685.
Fixes build errors like these:
host/usr/bin/go: No such file or directory
http://autobuild.buildroot.net/results/6664189a6f3a815978e8d0a1d7ef408ca47e2874/
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Gentoo wiki page is much more informative than the download directory.
This is the official homepage according to top level README.md.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lirc-tools package fails to build once in a while in the
autobuilders. Some quick analysis of the problematic Makefile.am has
revealed one issue. However, since the issue is difficult to
reproduce, we could only check that the new solution continue to work,
and we're not 100% sure it fixes the entire problem: only the
autobuilders can say, over time.
Supposedly fixes:
http://autobuild.buildroot.org/results/eb47d57de8182d25b1dacbf0ac3726ed20063d04/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Closes#8911
When the kernel passes single in the command line, this translates
into an init -s option that is suppose to drop into a shell after
the sysinit and before the runlevel.
So, in busybox this is hardcoded - but, in sysvinit using the
sysinit action for the rcS means that it will always be executed
even when trying to get into single user mode for repair.
This change should run rcS in all of the expected runlevels
1-5 and should achieve the desired result compared to the busybox
and still allow a single user shell to get started as expected
before running rcS.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add basic support for the roseapple pi board, a SBC in a RPI form factor
with an Actions Semiconductor S500 SoC. For details, see:
http://roseapplepi.org/
The vendor kernel unfortunately needs a minor patch to build the XHCI
driver, so include it here.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the first level bootloader for the Actions Semiconductor S500 SoC,
which is used on boards like Roseapple Pi and LeMaker Guitar.
The bootloader performs basic configuration and chain loads u-boot for
futher setup.
This bootloader is unfortunately only available as a binary blob. It gets
configured for a specific board using a binary (32bit x86) tool based on a
.ini file (somewhat similar to sunxi .fex).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch
0001-hidtest-dont-use-a-C-source-file-since-it-s-pure-C.patch in the
hidapi package needs to rename a file from .cpp to .c to avoid a
dependency on C++. This renaming currently uses the Git-way of
describing renames in patches. While this is interpreted properly by
recent enough versions of the 'patch' tool, it is ignored and not
understood by older versions of 'patch'. Due to this, with these older
versions of 'patch', the file is not renamed, and it causes a build
failure.
We fix this by not using the Git-like way of describing rename, but
rather using the old-style way of doing renames. It makes the patch
longer, but compatible with older versions of 'patch'.
Fixes:
http://autobuild.buildroot.org/results/d7509d9fdf8f86332a023358a740975f535eafef/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building an U-Boot image for the i.MX23 or i.MX28 target requires to run the
bootloaders 'mxsimage' tool on the host. As mxsimage needs unconditionally
OpenSSL, building U-Boot for those targets fails if it is not available on
the host:
tools/mxsimage.c:18:25: fatal error: openssl/evp.h: No such file or directory
#include <openssl/evp.h>
Add the required dependency 'host-openssl' to all the different U-Boot image
types used to build a bootloader image for an i.MX23/i.MX28 target.
Also pass HOST_CFLAGS and HOST_LDFLAGS to the U-Boot build process so the right
-I/-L options will be used to find OpenSSL.
Ported from the Armadeus project:
https://sourceforge.net/p/armadeus/mailman/message/33595402/
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
[Jörg: port to recent Buildroot version]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to some code imported from gnulib, the time package doesn't build
in static-only configurations. Indeed the gnulib code redefines the
error() and error_at_line() functions, which are also provided by the
C library. Since fixing the gnulib code is really difficult, let's
just disable this package for static-only builds.
Fixes:
http://autobuild.buildroot.org/results/a0e64faba69fa86755c693f575fb258a77e4e9d1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c45979c732 marked OProfile as not
available on the Xtensa architecture, due to the lack of memory
barrier operations. This commit does the same for the Microblaze
architecture, for the same reason, which allows to fix the following
autobuilder failure:
http://autobuild.buildroot.org/results/9a872ddc906e9d552d30762e849a1b537b4e5095/
It is worth mentioning that most likely Xtensa and Microblaze are
architectures implementing a strongly-ordered memory model, in which
case we could define the memory barriers as no-ops. But until someone
who actually cares about OProfile on Xtensa and Microblaze shows up,
it's probably better to disable the package on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-build-time help text currently looks like this:
usage: graph-build-time [-h] [--type GRAPH_TYPE] [--order GRAPH_ORDER]
[--alternate-colors] [--input OUTPUT] --output OUTPUT
Obviously, naming the parameter for --input as OUTPUT is not a very
good idea, so this commit fixes that to name it "INPUT", as expected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Og (introduced in GCC 4.8) lets you optimize for debugging experience,
which can be useful for when you want optimized code that is nonetheless
debuggable.
Signed-off-by: Martin Kelly <martin@surround.io>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2015-7995 - Fix for type confusion in preprocessing attributes
Also drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use of a merged /usr is not restricted to systemd anymore, thus the
current error message is misleading, as it only speaks about systemd.
Fix the message by just ditching the reference to systemd altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1856 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site
CVE-2016-1857 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's normally autodetected, which can lead to unexpected/unhandled
results.
configure checks for libdrm, libepoxy and wayland, however a proper
libxcomposite check is missing thus it can lead to build failure under
some odd conditions.
There's no autobuilder failure to quote here, however there's a mailing
list post that exemplifies this:
http://lists.busybox.net/pipermail/buildroot/2016-May/161793.html
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of flann in Buildroot fails to build with gcc 6.x,
with the following failure:
error: call of overloaded 'abs(flann::KDTreeIndex<flann::L2<float> >::ElementType)' is ambiguous
By bumping the upstream version one commit further, we get an upstream
fix that fixes the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The aarch64 Linaro toolchain source hash is not correct, probably due
to a copy/paste error. The new hash has been verified by downloading
the tarball, validating the signature, and computing the hash.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-treq selects python-pyopenssl, which depends on C++ support, but
this dependency was not propagated to python-treq, causing the following
kconfig warning:
warning: (BR2_PACKAGE_PYTHON_TREQ) selects BR2_PACKAGE_PYTHON_PYOPENSSL which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
This commit fixes that by adding the appropriate dependency.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-service-identity selects python-pyopenssl and python-pyasn, both
of which depend on C++ support, but this dependency was not propagated
to python-service-identity causing the following kconfig warning:
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYOPENSSL which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYASN which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
warning: (BR2_PACKAGE_PYTHON_SERVICE_IDENTITY) selects BR2_PACKAGE_PYTHON_PYASN_MODULES which has unmet direct dependencies ((BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3) && BR2_INSTALL_LIBSTDCPP)
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
midori selects webkitgtk, and webkitgtk needs a glibc toolchain, but
midori did not propagate this dependency, causing the following kconfig
warning:
warning: (BR2_PACKAGE_MIDORI) selects BR2_PACKAGE_WEBKITGTK which has unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 && BR2_TOOLCHAIN_USES_GLIBC && BR2_PACKAGE_LIBGTK3 && BR2_PACKAGE_WEBKITGTK_ARCH_SUPPORTS)
Interestingly, the Config.in comment of the midori package already
mentionned the (e)glibc dependency, but the BR2_TOOLCHAIN_USES_GLIBC
dependency was not expressed (either on the comment or on the main
package option itself).
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aircrack-ng has some scripts (airmon-ng, airmon-zc) that use external
tools for their functionality. We don't select the corresponding
packages because some of the other aircrack-ng tools don't need these
at all.
Still, the user should be informed of this. So update the help text to
refer to all packages used by the scripts:
- ethtool
- iw
- rfkill
- util-linux for lspci and lsusb (script uses options not available in
busybox)
- wireless_tools for iwconfig and iwpriv
See also bug #8936
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: lipkegu@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated here [1], recent changes on the MIPS binutils sources have
made it necessary for GCC to pass the -msoft-float to the assembler. Due
to that, valgrind fails to build for MIPS soft-float when using a
version of binutils >= 2.25 because its using some hard-float
instructions.
However, we cannot just disable it for the soft-float and binutils >=
2.25 combination since external toolchains don't provide information
about the binutils version they use. So, instead, we simply disable it
for soft-float.
1: https://gcc.gnu.org/ml/gcc-patches/2014-08/msg00905.html
Fixes:
http://autobuild.buildroot.net/results/5f5/5f576c7f8d56058a19ed0e7ff4b1ec620bcafb65/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's --enable-glx rather than --enable-egl, both are automatic though.
Change the autoreconf comment to reflect that it's required for all
patches.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In the makedev syntax documentation, one of the examples lacks the "mode"
value. This patch fixes that example.
Signed-off-by: Alan Yaniger <alan@tkos.co.il>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't enable SSP support on external toolchains just because they use
glibc or musl. Instead of that, make the external toolchains explictily
declare if they support SSP or not. And also add a check to detect SSP
support when using custom external toolchains.
For internal toolchains we always enable SSP support for glibc and musl.
Fixes:
http://autobuild.buildroot.net/results/ac7c9b3ad2e52abfe6b79a80045e4218eeb87175/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas:
- remove uClibc-specific SSP check, since there is now a generic
check being done.
- send potential compilation errors caused by the SSP check to
oblivion, in order to avoid causing confusion for the user.
- add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is a backport from Python 3.5, so it is not needed
for Python 3.5.x environment.
Fix python-tornado dependecies, so that python-backports-abc
is only selected for Python 2.x.
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Help lftp to find readline and zlib so it will not fail this way:
checking for Readline... no
configure: error: cannot find readline library, install readline-devel
package
checking if zlib is wanted... yes
checking for inflateEnd in -lz... no
checking zlib.h usability... no
checking zlib.h presence... no
checking for zlib.h... no
configure: error: cannot find -lz library, install zlib-devel package
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: group zlib/readline options into one definition of
LFTP_CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
v0.6 API offers some major additions, including:
* iio_device_set_kernel_buffers_counts
* iio_buffer_get_poll_fd
* iio_bufer_set_blocking_mode
* iio_buffer_push_partial
Signed-off-by: Matthew Fornero <mfornero@mathworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add new fuse2fs option and disable it for host-e2fsprogs to avoid
carrying over unused/unnecessary distro/host dependencies.
Move E2FSPROGS_DEPENDENCIES to the top to avoid nasty mistakes (like
resetting a previous conditional addition).
License file renamed from COPYING to NOTICE.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Backporting an upstreamed patch in order to fix a build failure like
this one:
In file included from src/math/src/polyc.c:43:0:
src/math/src/poly.findroots.c: In function
'polyc_findroots_bairstow_recursion':
src/math/src/poly.findroots.c:305:9: error: non-floating-point argument
in call to function '__builtin_isnan'
if (isnan(du) || isnan(dv)) {
Upstream commit URL:
3055eb3da9
Fixes:
http://autobuild.buildroot.net/results/01d/01d7d4f34b256bcdf30b16180c015f146bd50e63/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: tweak patch format.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-0718 - The Expat XML parser mishandles certain kinds of
malformed input documents, resulting in buffer overflows during
processing and error reporting. The overflows can manifest as a
segmentation fault or as memory corruption during a parse operation. The
bugs allow for a denial of service attack in many applications by an
unauthenticated attacker, and could conceivably result in remote code
execution.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was added in 0dece985 to deal with kernel headers 4.5 -> 4.5.4
breakage. Unfortunately the fix in 4.5.5 and 4.6+ doesn't deal correctly
with this causing more build breakage, so we'd rather "break" for the
small range of 4.5.x versions broken than for the rest of time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pexpect contains one file, async.py, that is only meant to be used
with Python 3. Due to this, it fails to byte-compile with Python 2,
which will become a problem once we make byte-compilation failures
fatal failures that abort the build.
As suggested by upstream at
https://github.com/pexpect/pexpect/issues/290, we simply remove the
problematic file when building with Python 2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Plugin list for the package is split into 2 parts - dependencyless and
ones with external dependencies. The first list is kept sorted
alphabetically, but the second has entries without any particular order,
so keep it sorted as well.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change switches ARC tools to the most recent arc-2016.03
version.
ARC GNU tools of version arc-2016.03 bring some quite significant
changes like:
* Binutils v2.26+ (upstream commit id 202ac19 with additional ARC
* patches)
* GCC v4.8.5
* GDB 7.10
More about changes, improvements and fixes could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2016.03
Note in this change we're adding sha512 checksums for
both binutils and gcc tarballs fetched from GitHub.
Build and run-tested in nSIM for both ARC700 and ARC HS38.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of python-pygame in Buildroot does not
byte-compile properly with Python 3. Commit 22efec0b44da from upstream
fixes the problem, so we take this opportunity to bump the pygame
version.
Fixing byte-compilation is necessary as we will soon enable a
mechanism that aborts the build in case of error during the
byte-compilation process (while they are today considered as
warnings).
In order for the bump to work, we explicitly disable freetype support,
as the package doesn't handle the freetype dependency for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For its continuous integration tests, python-crossbar includes one .py
file that intentionally has a syntax error. Until now, this wasn't
causing any problem, but with the introduction of a Python
byte-compilation process that errors out when there is a failure, it
is going to become a problem.
We simply add a patch that removes the syntax error, as we don't care
about it in the context of Buildroot. The problem has been reported
upstream to see if a better fix is possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though we disable the build of .pyo files in the interpreter,
nothing prevents other packages to install them. Since we only want to
keep either .py or .pyc or both, let's add a target finalize hooks
that removes all .pyo files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add --no-run-if-empty option to xargs, as suggested by Samuel.]
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Since the bump of python3 to 3.5.x, the target finalize hooks
registered by the python3 have been changed a little bit. For the sake
of consistency, this commit aligns the target finalize hooks
registered by the python package so that they look the same as the
ones used by python3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The major changes in terms of Buildroot packaging are:
- Due to PEP488, Python no longer generates .pyc (unoptimized) and
.pyo (optimized) byte-code files. Instead, it generates <foo>.pyc,
<foo>.opt-1.pyc and <foo>.opt-2.pyc. Therefore, we removed the
--disable-pyo-build option and kept only the --disable-pyc-build
option, which completely disables building all .pyc files. In
addition, since the optimized .opt-X.pyc files don't work if the
corresponding un-optimized .pyc file is not present, we are for the
moment unconditionally removing the optimized ones (keeping both
the unoptimized and optimized ones doubles the required filesystem
size!). So basically we preserve the behavior we had before this
commit:
BR2_PACKAGE_PYTHON3_PY_ONLY -> only *.py
BR2_PACKAGE_PYTHON3_PYC_ONLY -> only non-optimized *.pyc
BR2_PACKAGE_PYTHON3_PY_PYC -> both the *.py and non-optimized *.pyc
To achieve this, the TARGET_FINALIZE_HOOKS are reworked:
PYTHON3_REMOVE_PY_FILES is responsible for removing *.py files in
the BR2_PACKAGE_PYTHON3_PYC_ONLY case.
PYTHON3_REMOVE_PYC_FILES is responsible for removing *.pyc files
in the BR2_PACKAGE_PYTHON3_PY_ONLY case.
PYTHON3_REMOVE_OPTIMIZED_PYC_FILES is responsible for removing the
optimized *.opt-1.pyc and *.opt-2.pyc files, which is done
unconditionally.
- The PEP3147 disabling patch had to be significantly reworked due to
the code having changed heavily. The code was moved into a
_bootstrap_external.py, which is a "frozen" Python module, i.e a
module generated into a .h file at compile time using the
_freeze_importlib program.
- Due to the above, we now need to regenerate importlib.h at build
time. Unfortunately, for the target Python _freeze_importlib is
built for the target, so we can't run it on the build machine. To
fix this, we copy the _freeze_importlib program from the
host-python in $(HOST_DIR), and then patch the target python to use
it. Since the same solution can be used for 'pgen', we do it, and
avoid having to touch the graminit.{c,h} files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set uClibc DODEBUG in case BR2_ENABLE_DEBUG is set.
Setting DODEBUG was removed with commit 70b7079d37
in Dec. 2013 because of build failures with the old uClibc (now replaced
with uClibc-ng), no build failure with raspberrypi3_defconfig and
BR2_ENABLE_DEBUG enabled.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the host system compiler is gcc-6, this patch is needed to build
Buildroot toolchain and cleanly apply on gcc version 4.8.x to 5.x (not
needed for 4.7.x series).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_BOOST_ARCH_SUPPORTS option was originally added in
commit feeab03fa6 to be able to disable
Boost on broken NIOSII CodeSourcery toolchains.
However, since then, the CodeSourcery toolchain has been updated, and
once the fenv problem is fixed, this NIOSII toolchain is capable of
building Boost.
Thanks to this we can completely get rid of the
BR2_PACKAGE_BOOST_ARCH_SUPPORTS symbol, from boost itself and from all
its reverse dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our musl support has now been around for quite some time, numerous
packages have been fixed (although admittedly not all). It's time to no
longer call our musl support "experimental": things are now expected to
be working with musl just like with the other two C libraries we
support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have added support for the lastest binutils version 2.26,
it is time to remove the oldest version we currently support, 2.23, in
order to keep only 3 versions: 2.24, 2.25 and 2.26.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On ARC and Microblaze, a special GDB version is used, fetched from
Github in both cases. Now that we consider Github generated tarballs
to be stable, we can specify hashes for those versions, rather than
using the special "none" hash to skip the hash check.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that 7.11 has been added and 7.10 is the default version, let's
remove the old 7.8 release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
7.11 is around, 7.10 has already seen a point release, so it's time to
make 7.10 the default version for gdb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb 7.11 was released on February 2016, it's time to include it in
Buildroot, which this commit does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc-2.22 does not build with gcc 6.x. The first issues can be fixed
by:
- Using the same 0004-gcc6.patch as we're using with glibc 2.23 since
Buildroot commit ab8de336eb.
- Backport glibc commit 5542236837c5c41435f8282ec92799f480c36f18 to fix
strchr() build failure.
But then, there are some more failures caused by the fact that numerous
glibc files were not using modern prototypes in the function
definitions, causing build failures such as:
../sysdeps/unix/sysv/linux/dl-openat64.c:26:1: error: 'openat64' defined as variadic function without prototype [-Werror]
openat64 (dfd, file, oflag)
^~~~~~~~
In file included from ../include/fcntl.h:2:0,
from ../sysdeps/unix/sysv/linux/dl-openat64.c:21:
../io/fcntl.h:214:12: note: previous declaration of 'openat64' was here
extern int openat64 (int __fd, const char *__file, int __oflag, ...)
^~~~~~~~
This could be fixed by backporting glibc commit
9dd346ff431fc761f1b748bd4da8bb59f7652094, but this is a large commit,
touching a significant number of files. We probably don't want to take
this path, and instead making glibc 2.22 as not available with gcc 6.x
seems like the right course of action.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to patch 840-microblaze-enable-dwarf-eh-support.patch, gcc 6.x
does not build:
../../gcc/config/microblaze/microblaze.c: In function 'void microblaze_expand_epilogue()':
../../gcc/config/microblaze/microblaze.c:3046: error: 'gen_rtx_raw_REG' was not declared in this scope
This patch was originally added to gcc 4.9 to make it capable of
building glibc. However, this is no longer needed with gcc 6.x, which
builds glibc just fine.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to version 2016.05 and also remove patch
003-tools-env-bug-config-structs-must-be-defined-in-tool.patch, as it is
upstreamed now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With systemd, samba4 will need some special temporary files to be
created on each boot, as explained in:
packaging/systemd/README
Install the provided template file as configuration.
However, this is not enough, as even the log directory is a tmpfs in
the default Buildroot configuration, so we must also create the log
directory on each boot. Hence we append this to the template installed
above.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we need to bump openvpn to version 2.3.11 for security fixes
the time has come to remove the polarssl option.
Add legacy handling explaining the situation:
PolarSSL 1.2.x can coexist with mbedTLS 2.x+, but OpenVPN requires
PolarSSL/mbedTLS 1.3.x (the transition branch) >= 1.3.8 but doesn't
build/work with the 2.x series. And PolarSSL/mbedTLS 1.3.x can't coexist
with mbedTLS 2.x on the same target.
So, unfortunately, openssl is now the only option (until libressl
arrives) which means no more backend options in general.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The android-tools Config.in.host has some logic to ensure that at
least one of its sub-options is enabled. However, this logic
incorrectly uses the sub-option names from the *target* android-tools
package, while it should be using the ones from the *host*
android-tools package.
Fixes the following kconfig warning:
warning: (BR2_PACKAGE_HOST_ANDROID_TOOLS) selects BR2_PACKAGE_ANDROID_TOOLS_ADB which has unmet direct dependencies (BR2_PACKAGE_ANDROID_TOOLS && BR2_USE_MMU)
Reported-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fastboot sub-option of android-tools did not properly replicate the
dependency of libselinux, which it is selecting. Due to this, an invalid
configuration could be generated, with fastboot selected while thread
support is not available for example (and therefore libselinux is not
available). This problem was causing the following build failure:
http://autobuild.buildroot.net/results/21e45cee04fd983c85c6702595ee3f7ed8470931/
This is fixed by replicating the selinux dependencies in the fastboot
sub-option and adding the relevant Config.in comment.
In addition, the main android-tools option had some logic to make sure
at least one of its sub-option is enabled: adbd by default on systems
with MMU, and fastboot by default on systems without MMU (because
fastboot is the only part that builds on noMMU systems).
However, with the new dependencies in the fastboot sub-option, this
logic would have become a lot more complicated. Since fastboot is very
unlikely to be used on noMMU systems, we simply make the whole package
not available on noMMU systems.
Cc: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Antoine Tenart <antoine.tenart@free-electrons.com>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 919c06c282 the calls to gcc always pass
through the toolchain wrapper and all gcc patches to support poisoning has been
removed.
Update the BR2_COMPILER_PARANOID_UNSAFE_PATH comment.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mesa3d DRI drivers can be enabled without support for libgl (for
example without x11). So make glmark2 gl (x11) support depend on
BR2_PACKAGE_HAS_LIBGL being present as well.
It doesn't exactly mean mesa3d providing libgl, but since we can't have
more than one libgl provider at the same time it's equivalent.
This is fallout from f1894ec957 which
enabled DRI drivers for non-xorg builds. Fixes:
http://autobuild.buildroot.net/results/174/1743ee5a340e5f4b1f8519e0b11eb196caa4f30e/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quagga runs as the "quagga" user, but it also needs to modify files
in /etc and /var - config files, pid files and vty sockets for vtysh.
Tell the configure script the right folders to use, create the
user, fix the permissions, and then let systemd know (if needed).
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of hardcoding the genimage.cfg path, let's add a BOARD_DIR
variable to improve readability.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
turbolua fails to build when we have openssl selected, because it didn't
mention openssl in the dependency list.
Fix build failure by specifying openssl in dependency list when it is
selected.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use rsync with '--keep-dirlinks' option to prevent rootfs overlay to
overwrite /usr, /bin, /sbin and /lib links in case BR2_ROOTFS_MERGED_USR
option is enabled.
Steps to reproduce failure:
- enable BR2_ROOTFS_MERGED_USR
- mkdir some_path/rootfs-overlay/lib/firmware/some_file.txt
- enable BR2_ROOTFS_OVERLAY="some_path/rootfs-overlay"
- run 'make'
- 'target/lib' contains only the files from 'some_path/rootfs-overlay/lib' instead
of the original symlink 'lib -> usr/lib'.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The log_msg symbol conflict was fixed in libevdev commit e4c315fc1603 (Rename
symbols leaking from static library to avoid name clashes, 2014-08-18) that
was included in version 1.3 of libevdev. Remove the patch that used to fix the
issue of log_msg symbol conflict with libevedev, which is a direct dependency
of libinput.
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 919b4f9eab the internal symbol
LIB_EXTERNAL_LIBS was renamed TOOLCHAIN_EXTERNAL_LIBS but the find and
replace command also renamed BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS to
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS which doesn't exist.
So user provided libraries defined in BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
are not copied anymore to staging and target directories.
For example:
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS="libasan.* libubsan.*"
Simply revert this change by renaming
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS to BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix typo in config powerpc64 depends. Go language only supports 64 bit powerpc.
Also add BR2_powerpc64le to depends list.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To build programs that need cgo support the toolchain needs to
be available.
Cc: Christian Stewart <christian@paral.in>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas: add comment in the code about the toolchain dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
install -D creates the folder, so we don't need the mkdir command
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we put all source archives side-by-side in the same
directory.
Since we're about to also save individual patches that were applied
on those sources, we don't want to make that directory a complete
mess of unassorted files.
So, we install each source archive in its own sub-directory, where
we'll later store the patches too. Store that location in a variable,
so it can be re-used later on (to install patches in a future commit).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When preparing the legal-info, the source archives are copied in the
legal-info/ output directory. When the archives are big, it can take
quite a bit of time and unnecessarily uses disk space. When the
legal-info output directory is on the same filesystem as the BR2_DL_DIR,
we can easily reduce copy time and disk usage by just using hardlins
instead of copying. However, the BR2_DL_DIR may be on a different
filesystem, so we must fallback to copying in this case
Introduce a helper script that copies a source file into a destination
directory, by first attempting to hard-link, and falling back to a
plain copy in case the hardlink fails.
In case the destination already exists, it is forcibly removed first, to
avoid clobering any existing target file (and especially any hardlink to
it), since cp -f does not remove the destination file, but clobbers it.
In some situations, it will be necessary that the destination file is
named differently than the source, so if a third argument is specified,
it is treated as the basename of the destination file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change switches ARC tools to RC2 of the most recent arc-2016.03
version.
Essentially once final release is ready version will be bumped again.
ARC GNU tools of version arc-2016.03 bring some quite significant
changes like:
* Binutils v2.26+ (upstream commit id 202ac19 with additional ARC patches)
* GCC v4.8.5
* GDB 7.10
More about changes, improvements and fixes could be found here:
https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/releases/tag/arc-2016.03-rc2
Also in this change we realign custom Buildroot patches for binutils and
gcc for ARC tools. Looks like earlier most of arch-independent patches
for binutils and gcc were either unintentionally removed or not even
added in patch folders for ARC's binutils and gcc. Now arch-independent
patches for binutils-2.26 and gcc-4.8.5 were added in
package/{binutils|gcc}/arc-2016.03-rc2 folders.
Build and run-tested in nSIM for both ARC700 and ARC HS38.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 2f37ef48e8 ("configs/imx6ulevk: Use ext4 as filesystem type")
the rootfs type is ext4, so update the readme.txt accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1541 - heap-based buffer overflow vulnerability in the
zip_read_mac_metadata function in libarchive, a multi-format archive and
compression library, which may lead to the execution of arbitrary code
if a user or automated system is tricked into processing a specially
crafted ZIP file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kodi depends on egl/gles on arm, our Kconfig option BR2_PACKAGE_KODI_GL
reflects this, it depends on !BR2_arm.
This option is wrongly used in many Kodi addons needing OpenGL, they
can be compiled even if Kodi itself uses egl/gles. This patch changes
the dependency on BR2_PACKAGE_KODI_GL to BR2_PACKAGE_HAS_LIBGL.
Tested using this defconfig:
BR2_arm=y
BR2_cortex_a17=y
BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_SCREENSAVER_ASTEROIDS=y
BR2_PACKAGE_KODI_SCREENSAVER_ASTERWAVE=y
BR2_PACKAGE_KODI_SCREENSAVER_BIOGENESIS=y
BR2_PACKAGE_KODI_SCREENSAVER_CPBLOBS=y
BR2_PACKAGE_KODI_SCREENSAVER_CRYSTALMORPH=y
BR2_PACKAGE_KODI_SCREENSAVER_GREYNETIC=y
BR2_PACKAGE_KODI_SCREENSAVER_MATRIXTRAILS=y
BR2_PACKAGE_KODI_SCREENSAVER_PINGPONG=y
BR2_PACKAGE_KODI_SCREENSAVER_PLANESTATE=y
BR2_PACKAGE_KODI_SCREENSAVER_PYRO=y
BR2_PACKAGE_KODI_SCREENSAVER_RSXS=y
BR2_PACKAGE_KODI_SCREENSAVER_STARS=y
BR2_PACKAGE_KODI_VISUALISATION_FISHBMC=y
BR2_PACKAGE_KODI_VISUALISATION_FOUNTAIN=y
BR2_PACKAGE_KODI_VISUALISATION_GOOM=y
BR2_PACKAGE_KODI_VISUALISATION_SHADERTOY=y
BR2_PACKAGE_KODI_VISUALISATION_SPECTRUM=y
BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE=y
BR2_PACKAGE_KODI_VISUALISATION_WAVEFORM=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
$ grep PACKAGE_HAS_LIB .config
BR2_PACKAGE_HAS_LIBGL=y
BR2_PACKAGE_HAS_LIBEGL=y
BR2_PACKAGE_HAS_LIBGLES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
/home/bernd/buildroot/output/build/kodi-screensaver-asterwave-0dc2c48dadb100954eef823e7e3a5f502ce65b1e/src/Water.cpp:25:20:
fatal error: GL/glu.h: No such file or directory
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
Makefile:477: *** libplatform is in the dependency chain of
kodi-visualisation-shadertoy that has added it to its _DEPENDENCIES
variable without selecting it or depending on it from Config.in.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Various small changes to comments:
- shorten OpenGL info (Thomas)
- fix typos
- add full packages names when missing (Thomas)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable kernel drivers for networking and add a simple
busybox config with basic network tools.
Add kernel patch from Linux git to fix hush segfaults while
using signal handler.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
Fix GetNextToken() off by one error.
Check for buffer overflow in magick/draw.c/DrawStrokePolygon().
Remove support for internal ephemeral coder.
These are all related to the recent ImageTragick bundle that were
partially fixed in 6.9.3-10 as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changed upstream URL to project site clamav.net, the tarball for the
new version is not available on sourceforge.net anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It requires python and it's normally used at build time, hence since we
don't support toolchain in the target it really doesn't make much sense.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should better use the final U-boot version rather than the release
candidate one.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the rpi-0, which is basically a rpi (model A+) in a
smaller form-factor.
This one does not have an ethernet port, so we just remove it from the
configuration (or we could use the existing rasbperrypi_defconfig and
suffer from a longer boot time because of the waiting for eth0).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although the current version of rpi-firmware we use is working just fine
on the rpi-zero, the latest firmware provides a DTB overlay to use the
USB OTG device in either host or slave modes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4553 - Cache Poisoning issue in HTTP Request handling
CVE-2016-4554 - Header Smuggling issue in HTTP Request processing
CVE-2016-4555 - Multiple Denial of Service issues in ESI Response
processing (client_side_request.cc)
CVE-2016-4556 - Multiple Denial of Service issues in ESI Response
processing (Esi.cc)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Romain Naour, commit
4d39ca1c2a ("toolchain-external: fix
installation for CodeSourcery AArch64 toolchain") has a small bug where
a post-install hook doing fixups in TARGET_DIR was registered as a
staging installation hook while it should have been registered as a
target installation hook. This commit fixes this inconsistency.
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Golang has significant improvements to support for multiarch in later
versions. This bump is required to make many go programs functional
under arm64, for example.
Signed-off-by: Christian Stewart <christian@paral.in>
Acked-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
* Update the .config file
* Update the help text:
- Lua support is not restricted to Lua 5.2
- U-Boot supports needs now BR2_PACKAGE_UBOOT_TOOLS additionally
* Remove comment about bundled lsqlite3, it has been removed.
* Remove upstream patches:
- "Kbuild: Fix link error for CONFIG_UBOUT and missing libz" [1]
- "Kbuild: Link with GCC instead of LD" [2]
* Add patch from upstream:
- "Fix build without MTD support" [3]
* Add optional dependency for libarchive
* Add optional dependency for uboot-tools
[1] 5a5ef5909f
[2] f26577423e
[3] 69c0e66994
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add host-pkgconf in the dependency when Lua is enabled, as it
is used to find Lua.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The xorg server is somewhat sensitive to certain gcc versions combined
with -Os, particularly for ARM and MIPS, typically in the form of the
following symptom/error:
(EE) Segmentation fault at address 0x0
(EE)
Fatal server error:
(EE) Caught signal 11 (Segmentation fault). Server aborting
Force -O2 to work around this problem - for a target rootfs that uses
X11 the tradeoff is minimal since a sample/test image for qemu vexpress
with X11 + xinit + xterm + twm + xclock + gtk2 with demos is 60+ MB.
And it's less complicated than trying to find all of the bad
combinations.
Fixes bug #8436.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add comment in .mk file, add reference to bug.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox provides an option to embed a custom environment image into
barebox binary. This image will be used, when the environment found in
the environment sector is invalid. Both embedded and external images
can be used together, so having both options at the same time is
justified.
This patch sets barebox Kconfig option CONFIG_DEFAULT_ENVIRONMENT_PATH
to user specified path. This way one can use such BR's variables like
BR2_EXTERNAL, TOPDIR etc. to provide paths to custom environment
folders.
Cc: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ngx_http_spdy_module has been superseded by the ngx_http_v2_module
so BR2_PACKAGE_NGINX_HTTP_SPDY_MODULE has changed to
BR2_PACKAGE_NGINX_HTTP_V2_MODULE
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: rewrap Config.in.legacy help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using systemd nginx fails to start with the error
/usr/bin/mkdir: invalid option -- 't'
This is due to a missing space before the semicolon in nginx.service.
For systemd to handle multiple commands in ExecStartPre it requires the
semicolon to be a separate word or the use of multiple ExecStartPre.
This commit splits the multiple commands into two ExecStartPre lines
which fixes the error and improves readability.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The used U-Boot version (2014.01) isn't too happy with newer (>= 2.25)
binutils versions, so keep it locked down until the config is updated
for a newer version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The used U-Boot version (2014.04) isn't too happy with newer (>= 2.25)
binutils versions, so keep it locked down until the config is updated
for a newer version.
U-Boot 2016.03 in fact does work for mpc8315erdb - however it doesn't
yet support SPL which is necessary for NAND boot and would be a massive
defconfig revamp switching to NOR.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Results table:
Defconfig Kernel Qemu Network Status
------------------------------------------------------------------
aarch64_virt 4.5.3 2.5.0 YES OK
arm_versatile 4.5.3 2.5.0 YES OK
arm_vexpress 4.5.3 2.5.0 YES OK
m68k_mcf5208 4.5.3 2.5.0 NO SO-SO (3)
m68k_q800 4.5.3 q800-v2.4.0 NO (4) OK
microblazebe 4.5.3 2.5.0 YES OK
microblazeel 4.5.3 2.5.0 YES OK
mips64el_malta 4.5.3 2.5.0 YES OK
mips64_malta 4.5.3 2.5.0 YES OK
mipsel_malta 4.5.3 2.5.0 YES OK
mips_malta 4.5.3 2.5.0 YES OK
ppc_g3beige 4.5.3 2.5.0 YES OK
ppc_mpc8544ds 4.5.3 2.5.0 YES OK
ppc_virtex_ml507 4.5.3 2.5.0 NO OK
ppc64_pseries 4.5.3 2.5.0 YES OK
sh4 4.5.3 2.5.0 YES OK
sh4eb 4.5.3 2.5.0 NO (1) OK
sparc_ss10 4.5.3 2.5.0 YES OK
sparc64_sun4u 4.5.3 2.5.0 YES OK
sparc_sun4u 4.5.3 2.5.0 YES OK
x86 4.5.3 2.5.0 YES OK
x86_64 4.5.3 2.5.0 YES OK
xtensa_lx60 4.4.9 2.5.0 YES (2) OK
xtensa_lx60_nommu 4.4.9 2.5.0 YES (2) OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5
(3) - It boots, you can login, but apps exit/crash often
(4) - There's a network interface, but enabling it in qemu fails
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for ARM was changed to zImage in 5c67cb1d, however the
sh4/sh4eb sample configs were updated to switch to uImage in error,
hence end up building uImage which doesn't work with Qemu.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: fix commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
u-boot-dtb.img only gets built by default (all target) if
CONFIG_OF_SEPARATE _AND_ CONFIG_SPL_FRAMEWORK are enabled.
Certain SoCs (E.G. Action Semi S500) use a proprietary first level
bootloader instead of u-boot SPL, but still use u-boot-dtb.img as the first
level bootloader parses the uImage header for size/loadaddr.
Ensure u-boot-dtb.img gets built if enabled by explicitly listing it as a
u-boot make target (next to all) to support such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin was moved from -bad to -good so remove the option.
Support in -good was added via 301e8ffb.
Add legacy entry to notify users of this, however we can't automatically
select the good variant since good might be disabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin was moved from -bad to -ugly so remove the option.
Support in -ugly was added via 30cde9a3.
Add legacy entry to notify users of this, however we can't automatically
select the ugly variant since ugly might be disabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using 'yes "" | make oldconfig' to regenerate a .config file from an
existing defconfig does not work reliably in all cases. Specifically, it
does not work well with tristate choice entries.
The correct way to do it is to use 'make olddefconfig', but this target
is not supported in projects that use an old version of kconfig. As
most projects do not use tristate entries, there is no need for them to
upgrade.
'oldnoconfig' is an alias for 'olddefconfig', but it also is the only
name for this target between Linux versions 2.6.36 and 3.6.
Check which targets are supported by the current project, and use the
appropriate method to regenerate the .config file.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2088 - Duplicate EDNS COOKIE options in a response could
trigger an assertion failure.
Drop libressl support patch since it's upstream now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Packages installed for the host should have their prefix set to
$(HOST_DIR)/usr, and therefore not use DESTDIR at installation time.
Using PREFIX=/usr DESTDIR=$(HOST_DIR) is wrong, and leads for example to
luajit.pc containing prefix=/usr, which means pkg-config returns
incorrect results for host-luajit.
This patch fixes the luajit package to conform to this rule.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building crda with GCC 6 fails because of all compiler warnings are treated as
errors. Disable the compiler option '-Werror':
keys-gcrypt.c:94:32: error: ‘keys’ defined but not used [-Werror=unused-const-variable=]
static const struct key_params keys[] = {
^~~~
cc1: all warnings being treated as errors
Add a patch to drop '-Werror' from CFLAGS.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC 6 defaults to -std=gnu++14 instead of -std=gnu++98. The C++11 standard does
not allow "narrowing conversions" which is why building fdk-aac with GCC 6
fails:
libAACenc/src/aacEnc_rom.cpp:661:1: error: narrowing conversion of '2180108801u' from 'unsigned int' to 'FIXP_DBL {aka long int}' inside { } [-Wnarrowing]
Use '-std=gnu++98' as suggested by "Porting to GCC 6" [1].
[1] https://gcc.gnu.org/gcc-6/porting_to.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It already includes the fixes for CVE-2016-3994 and CVE-2011-5326 so
drop the patches, and additionally fixes:
CVE-2016-4024 - integer overflow in imlib2, which result in insufficient
heap allocation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Syslinux uses the host version of gcc to build to bootloader. On systems
with gcc 5.3, this results in a bootloader that hangs. This issue has
been addressed in upstream syslinux, but an official release has not
been made yet. This commit adds the upstream patch to fix the issue.
Most likely fixes bug #8866.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop patches applied upstream:
- 0001: notify: Don't use constexpr on Haiku
- 0002: notify: use "constexpr" only with glibc
Renumber remaining patches.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Includes numerous stablity and cleanup passes by ulli-kroll.
A hash file is also added, as it was missing before.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds support to build barebox with an auxiliary config.
This is useful for building an SPL (Secondary Program Loader) in
addition to the traditional TPL (Tertiary Program Loader). The
Beaglebone Black for example has two barebox configurations:
- am335x_defconfig builds the full barebox bootloader with device
tree
- am335x_mlo_defconfig builds the smaller MLO bootloader that loads
the full barebox bootloader from the eMMC or SD card.
Tested with the following defconfig:
# architecture
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_EABIHF=y
# system
BR2_TARGET_GENERIC_HOSTNAME="beaglebone"
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_DEVTMPFS=y
BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW=y
# filesystem
BR2_PACKAGE_AM33X_CM3=y
BR2_TARGET_ROOTFS_EXT2=y
BR2_TARGET_ROOTFS_EXT2_4=y
# bootloader
BR2_TARGET_BAREBOX=y
BR2_TARGET_BAREBOX_BOARD_DEFCONFIG="am335x"
BR2_TARGET_BAREBOX_IMAGE_FILE="images/barebox-am33xx-beaglebone.img"
BR2_TARGET_BAREBOX_CUSTOM_ENV=y
BR2_TARGET_BAREBOX_CUSTOM_ENV_PATH="board/beaglebone/barebox/barebox.env"
BR2_TARGET_BAREBOX_AUX=y
BR2_TARGET_BAREBOX_AUX_BOARD_DEFCONFIG="am335x_mlo"
BR2_TARGET_BAREBOX_AUX_IMAGE_FILE="images/barebox-am33xx-beaglebone-mlo.img"
# kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_DEFCONFIG="omap2plus"
BR2_LINUX_KERNEL_ZIMAGE=y
# use the barebox built-in dtb
# BR2_LINUX_KERNEL_DTS_SUPPORT is not set
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes. In preparation for the auxiliary barebox build,
boot/barebox is split into two parts:
1. boot/barebox:
- The source and patch specification which are to be shared between the
barebox and barebox-aux packages.
- The barebox-package function and build logic.
2. boot/barebox/barebox:
- The package configuration, fragments, barebox env, etc.
- The actual barebox package make instantiation.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also drop BR2_PACKAGE_MIDORI_HTTPS option since it's now handled in the
webkitgtk package to satisfy MiniBrowser.
This version can't work with the older webkitgtk24 engine so it switches
to the new version.
Also make gcr support conditional on x11 support for libgtk3, it doesn't
work otherwise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the latest 2.12.x upstream stable branch.
Both 2.4.x and 2.12.x can live side-by-side, however only the latest
stable branch/releases are security-maintained, so add it unslotted.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package allows to build the fastboot and adb host utilities,
which can be used to interact with target devices implementing one of
these protocols.
The work behind the host utilities was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
The package also allows to build fastboot, adb and adbd daemon for the
target.
Regarding adbd, the target is required to have the FunctionFS USB Gadget
configuration. Then the following commands enable the use of adb:
# modprobe g_ffs idVendor=0x18d1 idProduct=0x4e42 \
iSerialNumber="buildroot"
# mkdir -p /dev/usb-ffs/adb
# mount -t functionfs adb /dev/usb-ffs/adb -o uid=2000,gid=2000
# adbd &
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Julien Corjon <corjon.j@ecagroup.com>
[Thomas:
- update on top of master.
- fix Config.in.host prompt, it should have been "host android-tools"
and not just "android-tools".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The extracted toolchain sources contains a single symlink in the
aarch64-linux-gnu/libc/lib directory wich is lost during Buildroot's
staging install.
aarch64-linux-gnu/libc/lib/ld-linux-aarch64.so.1 -> ../lib64/ld-2.18.so
Add a custom post install staging and target hooks to create it
manually.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also make the same tweak in the target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Config can be used by other noMMU targets as qemu-system-m68k
with coldfire emulation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It has better performance for block and net.
Enable virgl (DRM_VIRTIO_GPU) support for 3D acceleration.
And also DRM_BOCHS for better stdvga acceleration.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a locale directory is empty, shell code like "for langdir in
$$dir/*;" will loop once with langdir set to "path/to/dir/*", rather
than not looping at all, which would obviously be the desired
behavior.
Then "grep -qx $${langdir##*/}" ungoes two shell expansions (how?)
that transform the expression from "${langdir##*/}" to "*" to "list of
all files in buildroot root dir". Which is most certainly not what
this command was supposed to do.
If one of those files happens to be an 8GB flash image, grep consumes
all available memory and crashes trying to search it.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2167 - svnserve/sasl may authenticate users using the wrong
realm.
CVE-2016-2168 - Remotely triggerable DoS vulnerability in mod_authz_svn
during COPY/MOVE authorization check.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See https://nodejs.org/en/blog/release/v6.0.0/
The patches from 5.11.0 have been copied to 6.0.0 with the following
changes:
- Removed 0001-Remove-dependency-on-Python-bz2-module.patch,
0003-Fix-va_list-not-declared.patch and
0004-Fix-support-for-uClibc-ng.patch as all 3 have been fixed upstream
- Renamed 0002-gyp-force-link-command-to-use-CXX.patch to
0001-gyp-force-link-command-to-use-CXX.patch
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The VA-API acceleration requires one or more of the egl-drm, wayland
and/or x11 backends.
Since the egl-drm backend means LIBGL (X11) + EGL + DRM we'll handle it
later once the mesa3d libgl hidden knob is applied.
So for now we'll support wayland and x11 until that happens. Fixes:
http://autobuild.buildroot.net/results/4b9/4b98d0c2c0617715e77fb47b3d97037c6b7562ec/
[Peter: pass --disable-vaapi if libva isn't enabled,
invert wayland/X11 test as suggested by Thomas]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
Enhancements
------------
* Add support for NTP and command response rate limiting
* Add support for dropping root privileges on Mac OS X, FreeBSD, Solaris
* Add require and trust options for source selection
* Enable logchange by default (1 second threshold)
* Set RTC on Mac OS X with rtcsync directive
* Allow binding to NTP port after dropping root privileges on NetBSD
* Drop CAP_NET_BIND_SERVICE capability on Linux when NTP port is disabled
* Resolve names in separate process when seccomp filter is enabled
* Replace old records in client log when memory limit is reached
* Don't reveal local time and synchronisation state in client packets
* Don't keep client sockets open for longer than necessary
* Ignore poll in KoD RATE packets as ntpd doesn't always set it correctly
* Warn when using keys shorter than 80 bits
* Add keygen command to generate random keys easily
* Add serverstats command to report NTP and command packet statistics
Bug fixes
---------
* Fix clock correction after making step on Mac OS X
* Fix building on Solaris
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Import patch from cryptopp upstream which fixes the gcc version checks
for using attribute deprecated with messages. Fixes build with host
gcc versions < 4.5.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- directly use the patch from upstream through <pkg>_PATCH rather
than storing it in package/cryptopp/, as it helps avoiding
line-endings problems: upstream has the source code with DOS line
endings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for gcc 6. This release allows to remove
a large number of our gcc patches, mainly thanks to the Xtensa and
musl related patches being merged upstream.
Patches kept with no changes:
100-uclibc-conf.patch
301-missing-execinfo_h.patch
810-arm-softfloat-libgcc.patch
830-arm_unbreak_armv4t.patch
840-microblaze-enable-dwarf-eh-support.patch
860-cilk-wchar.patch
890-fix-m68k-compile.patch
Patches dropped because they have been merged upstream, or were
already upstream backports:
120-gcc-config.gcc-fix-typo-for-powerpc-e6500-cpu_is_64b.patch (merged)
850-libstdcxx-uclibc-c99.patch (merged in a different form, see
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58393)
870-xtensa-add-mauto-litpools-option.patch (upstream backport)
871-xtensa-reimplement-register-spilling.patch (upstream backport)
872-xtensa-use-unwind-dw2-fde-dip-instead-of-unwind-dw2-.patch (upstream backport)
873-xtensa-fix-_Unwind_GetCFA.patch (upstream backport)
874-xtensa-add-uclinux-support.patch (upstream backport)
900-libitm-fixes-for-musl-support.patch (upstream backport)
901-fixincludes-update-for-musl-support.patch (upstream backport)
902-unwind-fix-for-musl.patch (upstream backport)
903-libstdc++-libgfortran-gthr-workaround-for-musl.patch (upstream backport)
904-musl-libc-config.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
905-add-musl-support-to-gcc.patch (upstream backport)
906-mips-musl-support.patch (upstream backport)
907-x86-musl-support.patch (upstream backport)
908-arm-musl-support.patch (upstream backport)
909-aarch64-musl-support.patch (upstream backport)
Successfully build-time and run-time tested with
qemu_arm_vexpress_defconfig, using gcc 6.x, both in uClibc and musl
configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 302563539d fixes link with libm for all
targets linking against libyajl{,_s}. This makes patch "0001-cmake-uClibc-Fix
-missing-libm-for-tests" obsolete so it is safe to remove it.
Instead of renumbering all remaining patches the patch defined in YAJL_PATCH
is fetched and put intto the packages directory. Having all the patches in one
places makes the number and order of the patches applied to the package more
clear.
Align patch "0003-Link-with-shared-libyajl-in-a-shared-build" with commit
302563539d and remove linking with libm from
test/api/CMakeLists.txt.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libusbgx is a C library encapsulating the kernel USB gadget-configfs
userspace API functionality.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas: adjust license information, there are included examples that
are installed by default, licensed under GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sysroot toolchain support check is duplicated at two locations in
the external toolchain infra. So move it inside the
check_unusable_toolchain helper that is called when the toolchain
package is configured (TOOLCHAIN_EXTERNAL_CONFIGURE_CMDS).
The check in TOOLCHAIN_EXTERNAL_INSTALL_SYSROOT_LIBS can be safely
removed since it's already done in check_unusable_toolchain helper.
The check in TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS was removed by
2a87b64f8e.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some toolchain can't be used by Buildroot due to sysroot location
issue, so the $(ARCH)-linux-gnu-gcc -print-file-name=libc.a command
return only "libc.a"
This lead to an error during the header check version helper,
so these toolchains can't be imported into Buildroot.
cc1: fatal error: $PWD/libc.a/usr/include/linux/version.h: No such file or directory
compilation terminated.
support/scripts/check-kernel-headers.sh: line 38: /tmp/check-headers.4V5PPF: Permission denied
This issue happen with the first linaro 2015.11 [1] release and
CodeSourcery standard edition [2].
Here is the sysroot directory tree for linaro 2015.11:
$ ls libc/arm-linux-gnueabihf
etc lib sbin usr var
Here is the sysroot directory tree for CodeSourcery standard:
$ ls libc/sgxx-glibc
etc lib lib64 sbin usr var
Add a check to error out with an explicit error message
The check don't use toolchain_find_libc_a function directly since
"realpath -f" is used internally and return an absolute path.
[1] https://bugs.linaro.org/show_bug.cgi?id=1995#c7
[2] http://lists.busybox.net/pipermail/buildroot/2014-October/110696.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes an error not yet caught by autobuilders:
In file included from SaveSet.c:27:0:
Xfixesint.h:67:20: error: static declaration of '_XEatDataWords' follows non-static declaration
static inline void _XEatDataWords(Display *dpy, unsigned long n)
^
To reproduce use this defconfig:
BR2_powerpc64le=y
BR2_powerpc_power8=y
BR2_OPTIMIZE_3=y
BR2_GLIBC_VERSION_2_23=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_5_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBXFIXES=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This revision fixes the build with recent kernel versions, which have
seen changes in the MMC framework breaking the build of external SDIO
drivers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of hardcoding again the version of the package when defining
WF111_SOURCE, this commit changes the WF111_VERSION so that it
contains the entire version number, and then modifies the WF111_SOURCE
definitions to use WF111_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When installing the WF111 modules, the module.* files generated during
the kernel compilation were overridden. This ended up having the wrong
information about the modules compiled in a given image (and only the
one about the WF111 module). This could be verified using the
"modprobe -l" command, with only the wf111 module showing up.
This patch fixes this by invoking the install_static target (which
will do both the build and installation) in WF111_INSTALL_TARGET_CMDS.
This way the files are not overridden but instead updated with the
additional WF111 informations.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Tested-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a message with MESSAGE, we can print it as the first command of
the command sequence, and in this case, we don't need to use a shell
continuation.
In one case, the call to MESSAGE is moved a few lines up in the
sequence of commands.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As suggested by Arnout, this commit renames:
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FDPIC to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FDPIC
- TOOLCHAIN_EXTERNAL_INSTALL_BFIN_FLAT to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_BFIN_FLAT
Which makes it clear that those variables are installing libraries to
the target, and make their naming more consistent with the naming of
other variables in the file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the alignment of toolchain library location in target and staging,
there is no need anymore for the distinction between LIB_EXTERNAL_LIBS and
USR_LIB_EXTERNAL_LIBS. Unify them into TOOLCHAIN_EXTERNAL_LIBS.
Related, update the help text of
BR2_TOOLCHAIN_EXTRA_TOOLCHAIN_EXTERNAL_LIBS.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external logic is roughly:
- populate the staging dir by rsyncing the entire ${ARCH_LIB_DIR} and
usr/${ARCH_LIB_DIR} from sysroot.
- populate the target dir by explictly copying some libraries from sysroot
into target/lib and some other libraries in target/usr/lib, the split
being hardcoded into buildroot regardless of the location in the sysroot.
This means that a library libfoo could be located in:
staging/lib/libfoo.so
target/usr/lib/libfoo.so
When debugging an application that links against this library, gdb will
fruitlessly search for 'usr/lib/libfoo.so' in staging, and then suggest to
use 'set solib-search-path' which is a hack, really.
To solve the problem, we need to make sure that libraries from the toolchain
are installed in the same relative location in staging and target.
Achieve this by:
- replacing the convoluted search for libraries using for+find in sysroot
with a simple find in staging.
- determining DESTDIR for each library individually based on the location in
staging.
- treating LIB_EXTERNAL_LIBS and USR_LIB_EXTERNAL_LIBS equivalently
These changes also allow for the removal of most arguments to
copy_toolchain_lib_root in the method itself and their callers.
Test procedure:
- set configuration for a given toolchain
- make clean toolchain
- find output/target | sort > /tmp/out-before
- apply patch
- make clean toolchain
- find output/target | sort > /tmp/out-after
- diff -u /tmp/out-before /tmp/out-after
The only changes should be some libraries moving from lib to usr/lib or vice
versa. Notable examples being libstdc++ and libatomic.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use -L instead of -follow in the find invocation, as suggested by
Arnout.
- move the BR2_STATIC_LIBS condition as a make condition rather than
a shell condition, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the gdbserver binary has no relation to the installation
of the target libraries. Moving it to a separate define improves the
understandability of the code and makes later refactoring easier.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[Thomas:
- move the BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY condition as a make
condition rather than a shell condition, as suggested by Romain
Naour.
- rename the TOOLCHAIN_EXTERNAL_INSTALL_GDBSERVER variable to
TOOLCHAIN_EXTERNAL_INSTALL_TARGET_GDBSERVER as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For external Blackfin toolchains with BR2_BFIN_INSTALL_FDPIC_SHARED set,
the FDPIC shared libraries are currently only copied to the target
directory, not to staging.
For debugging purposes, an unstripped copy in staging is necessary.
Moreover, this change will simplify a subsequent change that lines up the
location of shared libraries between target and staging directories.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target "$(LINUX_DIR)/.stamp_initramfs_rebuilt" uses its own
'cp' command, instead of LINUX_INSTALL_IMAGE/LINUX_INSTALL_IMAGES_CMDS
provided by (or updated with) commit 055e6162bb ("linux: don't build
appended DTB image in place and support multiple images") and thus is
not operating properly when APPENDED_DTB is used.
Indeed, it copies a single image, and does not copy the one with the DTB
appended.
This patch replaces the 'cp' command with LINUX_INSTALL_IMAGE which
handles APPENDED_DTB.
Fixes: 055e6162bb ("linux: don't build appended DTB image in place and
support multiple images")
Signed-off-by: Sebastian Frias <sf84@laposte.net>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glmark2 depends on mesa3d which already depends on BR2_INSTALL_LIBSTDCPP
and BR2_TOOLCHAIN_HAS_THREADS_NPTL, glmark2 does not depend on udev so
the comment stating all these dependencies is not needed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
WNPA-SEC-2016-19 - The NCP dissector could crash.
WNPA-SEC-2016-20 - TShark could crash due to a packet reassembly bug.
WNPA-SEC-2016-21 - The IEEE 802.11 dissector could crash.
WNPA-SEC-2016-22 - The PKTC dissector could crash.
WNPA-SEC-2016-23 - The PKTC dissector could crash.
WNPA-SEC-2016-24 - The IAX2 dissector could go into an infinite loop.
WNPA-SEC-2016-25 - Wireshark and TShark could exhaust the stack.
WNPA-SEC-2016-26 - The GSM CBCH dissector could crash.
WNPA-SEC-2016-27 - MS-WSP dissector crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 638ea2d715, since it
breaks the build of busybox in many configurations, with the following
issues:
/bin/bash: : command not found
make[1]: Entering directory `/home/test/autobuild/instance-0/output/build/busybox-1.24.2'
[...]
GEN miscutils/Config.in
make[2]: *** No rule to make target `olddefconfig'. Stop.
make[1]: *** [olddefconfig] Error 2
make[1]: Leaving directory `/home/test/autobuild/instance-0/output/build/busybox-1.24.2'
make: *** [/home/test/autobuild/instance-0/output/build/busybox-1.24.2/.config] Error 1
make: Leaving directory `/home/test/autobuild/instance-0/buildroot'
See:
http://autobuild.buildroot.org/results/48481bb3531927be35cda3df57d02f02cec709aa/
for example.
A minimal configuration with just Busybox doesn't exhibit the problem,
but adding libtirpc in the configuration is enough to trigger the
problem, so the following defconfig allows to reproduce the issue:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2016.02-3-g762b7c9.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_7=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PACKAGE_LIBTIRPC=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far identical to the rpi2 one except for the dts file as the SW runs in
32bit mode.
[Peter: extend commit message]
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 7f1f9185e (system: default to devtmpfs for /dev) changed our default
for /dev handling, but didn't remove the explicit selection of devtmpfs from
a number of defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using 'yes "" | make oldconfig' to regenerate a .config file from an
existing defconfig does not work reliably in all cases. Specifically, it
does not work well with tristate choice entries.
The correct way to do it is to use 'make olddefconfig', but this target
is not supported in projects that use an old version of kconfig. As
most projects do not use tristate entries, there is no need for them to
upgrade.
'oldnoconfig' is an alias for 'olddefconfig', but it also is the only
name for this target between Linux versions 2.6.36 and 3.6.
Check which targets are supported by the current project, and use the
appropriate method to regenerate the .config file.
Signed-off-by: Romain Izard <romain.izard.pro@gmail.com>
[yann.morin.1998@free.fr: use a shell construct instead of makefile code]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix minor typos.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions and new chipset
support as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It selects 7265 non-D firmware since they share the same firmware for
old kernel versions (rev 10 D-variant is the same as rev 10 non-D).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add a comment about the select in Config.in.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This avoids a lot of unnecessary complication with lots of revison
knobs for different chipsets and it's consequence when bumping
linux-firmware as well.
Users can purge unwanted versions from a post processing script if
target space is too constrained.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit will allow the LINUX_FIRMWARE_FILES variable to contain
wildcards, which will simplify the handling of firmware that are
available in numerous revisions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds another fix to the yajl build-system code.
This patch checks for isnan function in libc, and if not, it makes sure
libm is passed to the linker flags.
This change fixes build failure looking like:
make[3]: Entering directory `/home/peko/autobuild/instance-2/output/build/yajl-2.1.0'
[ 81%] Building C object example/CMakeFiles/parse_config.dir/parse_config.c.o
../yajl-2.1.0/lib/libyajl.so.2.1.0: undefined reference to `__isnan'
../yajl-2.1.0/lib/libyajl.so.2.1.0: undefined reference to `__isinf'
collect2: error: ld returned 1 exit status
make[3]: *** [verify/json_verify] Error 1
Fixes:
http://autobuild.buildroot.org/results/312/31268e4d20aa34bb90c09aa771b1923f979578ab/
and many others
Cc: Benoît Mauduit <bmauduit@beneth.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* package/busybox/udhcpc.script: Use $search instead of $domain if
that is defined.
Note that for this to work, not only has CONFIG_FEATURE_UDHCP_RFC3397
be enabled in Busybox' configuration but also the option has to be
requested using the "-O search" command-line option (one can set it in
CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS, for instance).
[Peter: add comment with reference to rfc3359/option 119 for clarity]
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional changes: Extracts an argument to the inner-barebox-package
function to automatically determine the uppercase package name. This is needed
to support a 2nd config build. This results in the following renaming:
'BAREBOX' -> '$(1)'
All barebox packages are meant to be built from the same sources, so related
KConfig variables (origin, version and patch directory) are not extracted.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
No functional changes: Introduces a barebox-package function towards
re-use by a 2nd config build.
Because the function is meant to be called from within a $(eval), all
instances of '$' has to be escaped. I.e. rename '$' -> '$$'.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support optional selection of the built image filename in a
multi-image barebox build. This makes it possible to specify which
image to pick in a multi-image barebox config such as the
am335x_defconfig.
Signed-off-by: Pieter Smith <pieter@boesman.nl>
[Thomas:
- remove default "", since this is the default for string options
- rename the prompt from "Barebox image filename" to "Image filename"
- slightly improve the Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The new address include more recent versions of stable releases.
Therefore, newer versions than 2.6.4 can be available when required.
Signed-off-by: Erdem MEYDANLI <erdem.meydanli@punica.com.tr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove upstream commited patch:
0002-makefiles-cmake-vmcs.cmake-allow-to-override-VMCS_IN.patch
- fix compile errror (missing include for va_list with uclibc-1.0.14):
0006-dtmerge-add-missing-include-for-va_list.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARM926 size delta +12 KB.
It's required for the upcoming mpv package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Forcibly disable wacom support since we haven't got a libwacom package
yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise since it's automatic it was left to random depending on the
libgtk3/libinput build order.
Also collapse all that whitespace.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version contains a patch that fixes the following crash:
make[1]: Entering directory `<...>/build/uclibc-1.0.14'
CC utils/getconf
*** buffer overflow detected ***: <...>/bin/elf2flt terminated
======= Backtrace: =========
/lib/x86_64-linux-gnu/libc.so.6(+0x7338f)[0x2ad3be5f738f]
/lib/x86_64-linux-gnu/libc.so.6(__fortify_fail+0x5c)[0x2ad3be68ec9c]
/lib/x86_64-linux-gnu/libc.so.6(+0x109b60)[0x2ad3be68db60]
/lib/x86_64-linux-gnu/libc.so.6(+0x109069)[0x2ad3be68d069]
/lib/x86_64-linux-gnu/libc.so.6(_IO_default_xsputn+0xbc)[0x2ad3be5ff70c]
/lib/x86_64-linux-gnu/libc.so.6(_IO_vfprintf+0xaef)[0x2ad3be5ce7df]
/lib/x86_64-linux-gnu/libc.so.6(__vsprintf_chk+0x84)[0x2ad3be68d0f4]
/lib/x86_64-linux-gnu/libc.so.6(__sprintf_chk+0x7d)[0x2ad3be68d04d]
<...>/bin/elf2flt[0x403cda]
<...>/bin/elf2flt[0x4030a4]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0xf5)[0x2ad3be5a5ec5]
<...>/bin/elf2flt[0x403642]
Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In TOOLCHAIN_EXTERNAL_INSTALL_TARGET_LIBS, ARCH_SUBDIR is calculated but not
used, and can thus be removed. Since SYSROOT_DIR is only used for the
calculation of ARCH_SUBDIR, it can be removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We were not defining BR2_ARCH for two of the x86 subarchitecture,
which means the architecture part of the GNU_TARGET_NAME tuple was
empty, leading to weird build failures.
This commit fixes that by defining the appropriate values.
Fixes bug #8861.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps the rpi-firmware to a more recent version that
includes support for the Raspberry Pi 3.
Signed-off-by: Ubaldo Porcheddu <ubaldo@eja.it>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes icon lookups faster, though it's not strictly necessary.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: enclsoe the hook definition in the condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required to create the symbolic icons (RGBA/transparent) which some
apps like to use, like connman-gtk.
The added patch avoids the need for a full host-libgtk3 build which would
require host-libepoxy, host-mesa3d and a ton other deps.
And pull in host-librsvg so that we have the rsvg gdk-pixbuf loader
(plugin), otherwise scalable (svg) icons will error when trying to be
processed, like those provided by adwaita-icon-theme.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a download via a VCS method fails, Buildroot attempts the download
from the backup mirror (if any is set). Such a download is done with the
wget helper.
Given a package that has a .hash file for relase tarballs, which also
allows the user to use a random revision from a VCS, the normal download
wrapper will not check for hashes, on the assumption that maybe they are
not reproducible [*] (or user configurable).
However, when the download fails (for any reason: network error,
upstream removed the revision, old machine with incomplete set of CA
certificates...), the backup download now proceeds over with http (or
https) with the wget wrapper. The wget wrapper *always* checks for
hashes, and when a .hash file is present but no hash is found for the
download, this is considered an error.
However, when we download from the backup mirror for a main download that
should have been done with git/hq/svn/.., we in this situation have no hash
for the download. Thus, we should not fail on a missing hash for that
download. Same situation if a primary site is used.
Add a test for the site-method in the DOWNLOAD_INNER macro; if it was either
one of the VCS method, pass a one-off BR_NO_CHECK_HASH_FOR variable set to
contain the tarball to download.
Fixes issues like those reported by the Travis build bots:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/123624879
[Peter: Move logic to beginning of DOWNLOAD_INNER so it also applies for BR2_PRIMARY_SITE]
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0001 that adjusts the Makefile to solve cross-compilation issues
does a lot of whitespace changes that are unnecessary. We remove all
those noisy changes to keep only the really interesting ones.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vpnc upstream project has not made any tarball release since many
years, but they have continued to update their Subversion
repository.
A Github repository synced with the Subversion repository now exists
at https://github.com/ndpgroup/vpnc, which is more practical to
generate patches and submit pull requests. For this reason, we move to
using this Github repository as the new source for the vpnc
package. The specific commit that we use corresponds to version 0.5.3
exactly.
All patches are re-formatted using Git.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flannel is a virtual network that gives a subnet to each host for use
with container runtimes.
Cc: Brandon Philips <brandon.philips@coreos.com>
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Don't select BR2_PACKAGE_HOST_GO since this option was removed.
- Take into account the rename of BR2_PACKAGE_GO_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS.
- Rewrap Config.in help text, it was slightly too large.
- Don't use the github function (the link was anyway incorrect), but
instead a direct link to the tarball, since the tarballs are
uploaded by the maintainers.
- Update the hash accordingly.
- Use $() to reference make variables and not ${}.
- Call the go compiler from $(HOST_DIR)/usr/bin, rather than from
HOST_GO_ROOT.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new package 'go' which builds the host cross compiler and
libraries for the go programming language.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Put the computation of GO_GOARM inside the ifeq ($(BR2_arm),y)
condition rather than duplicating this condition.
- Remove the GO_GOARCH=unknown case, since there is no way to fall in
this case as only supported architectures can use host-go.
- Remove the GO_GOARM=unknown case, since we are sure that only
ARMv5/6/7 will use host-go.
- Rename HOST_GO_FINAL to HOST_GO_ROOT, since it's really the "root"
of the Go installation.
- Remove visible Config.in.host option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new package go-bootstrap which builds a bootstrap compiler for the
go programming language.
Signed-off-by: Geoff Levand <geoff@infradead.org>
[Thomas:
- Rename GO_BOOTSTRAP_FINAL to HOST_GO_BOOTSTRAP_ROOT. Use the HOST_
prefix because this variable is specific to the host variant. And
it's not "final" at all, but rather the "root" of the Go Bootstrap
installation.
- Rename GO_BOOTSTRAP_MAKE_ENV to HOST_GO_BOOTSTRAP_MAKE_ENV, also to
have the HOST_ prefix because it's a host package.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
SQUID-2016:5 (CVE-2016-4051) - Buffer overflow in cachemgr.cgi
SQUID-2016:6 (CVE-2016-4052) - Multiple issues in ESI processing.
CVE-2016-4053 & CVE-2016-4054 which are part of SQUID-2016:6.
Switch to xz-compressed tarball as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When setting BR2_LINUX_KERNEL_LATEST_VERSION, it is hard for the user to
know that this version is subject to change in the future.
Explicit this in the Kconfig entry text.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fio can automatically detect and use libaio when available, so this
commit makes this optional dependency explicit.
Suggested by Charles <ckhardin@exablox.com> in bug #8851.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'backward' zone references entries from other zones (e.g. Pacific/*)
that have not yet been compiled, leading to missing links. To fix this,
take-over the zone list sort order from upstream 'tzdata' and also ensure
that make fails if zic terminates with a non-zero exit code.
Signed-off-by: Michel Marti <mma@objectxp.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for cbootimage host utility that is able to compile bct
files and generate flashable images out of a bct and an image for
tegra processors.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package for the tegrarcm host utility that allows loading data to
tegra processors in recovery mode.
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas: replace cryptopp cross-compilation fix by a more
autoconf-style solution, which has been submitted upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Julian Scheel <julian@jusst.de>
[Thomas:
- put HOST_CRYPTOPP_EXTRACT_CMDS earlier in the file, since it's what
gets executed first.
- fix typo in the name of HOST_CRYPTOPP_MAKE_OPTS
- pass -fPIC in CXXFLAGS, since we're building a shared library
- just call "make shared" for the build and "make install" for the
installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commands like 'nvme list' require libudev but support for libudev is
decided at compile time, and in buildroot this is hard disabled.
Add a check for udev and if it is available build nvme with udev
support.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
[Thomas:
- add comment to explain the LIBUDEV variable value
- use += instead of = to assign <pkg>_MAKE_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux kernel doesn't even support i386 anymore, there is no NPTL
support for i386 and uClibc-ng only supports NPTL on x86, so there is
essentially no usable thread implementation. Most likely glibc and
musl also don't support i386 either. So it's time to remove the
support for this architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ucd-snmp/lmsensorsMib module uses lm-sensors, so ensure netsnmp is built
after lm-sensors if enabled.
As the list of mib modules to built is configured using a string option in
Kconfig, we cannot easily select lm-sensors from the netsnmp package - But
we can at least ensure it gets built before hand if enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a new defconfig to build a X-based
graphical system for the Minnowboard MAX board.
* The 'openbox' windows manager is chosen because it's simple
and lightweigth.
* Basic X apps are enabled (such as xrandr, xterm), so we
can at least get a console and change video mode.
* ALSA default configuration is provided, so HDMI audio
works out-of-the-box.
* OpenGL is supported.
Tested on Minnoboard Turot (which is Minnowboard Max compatible).
[Peter: drop unneeded/specific toolchain config options]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit enables support for:
* HDMI audio
* Support for user-provided EDID firmware
(useful to workaround broken monitors)
* Evdev interface
* System V IPC (required by ALSA)
The options make the system more useful.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Given Minnowboard and Minnowboard MAX boards are very similar,
it's desirable to unify the support for them.
This commit does the following:
1) Remove Minnowboard MAX's genimage.cfg, post-build.sh
and post-image.sh. These are identical to Minnowboard's.
2) Move Minnowboard MAX's linux config, and rename it.
It would be lovely to have a single kernel config file.
The kernel size penalty involved in adding support for
all the peripherals on both boards is small enough to
justify this.
However, the original Minnowboard has some GPIO buttons
that need to be registered by the kernel. This is not
upstreamed, and hence we need to use the yocto v3.8 kernel
to have this support.
3) Rename each grub config to grub-{board}.cfg.
4) Modify (the now unique) post-build script to use
a different grub config, according to the board.
5) Update both defconfigs, as per the above changes.
6) Finally, update the readme.txt.
[Peter: mention MAX in readme title]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit f4682cf933, a hash of the patches applied to gcc was created
to make sure that ccache can properly detect when the toolchain has
changed. The patches applied to gcc consist of the buildroot patches in
package/gcc, but also potentially patches in BR2_GLOBAL_PATCH_DIR.
However, the path to the patches in BR2_GLOBAL_PATCH_DIR was corrected
incorrectly, because it misses a /. So instead of:
$(BR2_GLOBAL_PATCH_DIR)/gcc-initial/*.patch
it would look for
$(BR2_GLOBAL_PATCH_DIR)gcc-initial/*.patch
In other words, if BR2_GLOBAL_PATCH_DIR doesn't end with /, the patches
in BR2_GLOBAL_PATCH_DIR are not taken into account in the ccache hash.
To fix, add the missing /
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: He Chunhui <hchunhui@mail.ustc.edu.cn>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although this package has been removed from the official release
packages since Qt5.6.0, it is still available for users to build
it from source. This is useful for platforms without GPU since its
successor (QtWebEngine) requires OpenGL support.
The package now matches the community-based meta-qt5 Yocto layer,
using the exact same revision of the qtwebkit source from github:
https://github.com/meta-qt5/meta-qt5/commit/e434995a
Here is the project source tree:
https://github.com/qtproject/qtwebkit
All the patches have been pulled from Yocto as well.
Since we are now using the source from the git repository, we need
to create an empty .git/ folder to force the headers re-generation.
https://github.com/meta-qt5/meta-qt5/blob/jethro/recipes-qt/qt5/qt5.inc#L33
Note that GPLv3 license option has been added with this release.
Reviewed-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: fix license to be LGPLv2.1+, not LGPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dc232b is MMUv2 core, dc233c is very similar MMUv3 core. MMUv3 is the
latest full MMU for xtensa, which allows running both MMU and noMMU
linux variants.
Update configuration overlay and linux config file.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Tested-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no benefit on it being an autodep since it makes it harder to
find, and pppd can be selected directly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current Buildroot defconfigs for Raspberry Pi and Raspberry Pi 2
instantiate a console on tty1, which appears on HDMI. Add a console on
the serial port (ttyAMA0) to be more consistent with other defconfigs
and provide a better out-of-the-box experience to users used to have a
serial console from Buildroot defconfigs.
This requires three changes:
1. have two 'console=' entries in the kernel command line: tty1,
then ttyAMA0;
2. change BR2_TARGET_GENERIC_GETTY_PORT to "console", so it starts
a getty on the last console= passed to the kernel, ttyAMA0;
3. add a new getty on tty1 to the generated inittab.
Step 2 is actually obtained by removing BR2_TARGET_GENERIC_GETTY_PORT
entirely from the defconfigs, since "console" is the default value.
Step 3 requires a post-build script since the Buildroot makefiles can
configure only one console.
Note: instead of simply adding a new getty on ttyAMA0 (which would
work) this patch actually changes BR2_TARGET_GENERIC_GETTY_PORT to
instantiate a console on UART, then adds back tty1 via
post-build.sh. This is done only to avoid the "GENERIC_SERIAL" comment
where we instantiate an HDMI console, then instantiate a really-serial
console on another line.
The result is these two inittab lines:
console::respawn:/sbin/getty -L console 0 vt100 # GENERIC_SERIAL
tty1::respawn:/sbin/getty -L tty1 0 vt100 # HDMI console
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make graph-depends script opening the output file in text mode since
only ascii characters will be written.
This change fixes the following error occuring when the default host
python interpreter is python3:
make: Entering directory '/opt/buildroot'
Getting targets
Getting dependencies for ['toolchain-external', 'toolchain', 'busybox', ...]
Getting dependencies for ['host-python3', 'host-pkgconf', 'host-gettext', ...]
Getting dependencies for ['host-libxml2', 'host-swig', 'host-m4', ...]
Getting version for ['toolchain-external', 'toolchain', 'busybox', ...]
Traceback (most recent call last):
File "/opt/buildroot/support/scripts/graph-depends", line 425, in <module>
outfile.write("digraph G {\n")
TypeError: a bytes-like object is required, not 'str'
Makefile:807: recipe for target 'graph-depends' failed
make[1]: *** [graph-depends] Error 1
Makefile:84: recipe for target '_all' failed
make: *** [_all] Error 2
make: Leaving directory '/opt/buildroot'
While with python2, adding 'b' to the openning mode has no effect on
Linux (c.f. [2]), the above error is expected with python3 (c.f. [1]).
Therefore, just open the outfile in default (i.e. text) mode.
[1] https://docs.python.org/3/library/functions.html#open
[2] https://docs.python.org/2/library/functions.html#open
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides the Universal Adapter user-space utility that is
used to receive commands from the Manufacturing Tool using the Freescale
UTP Protocol.
It requires a Freescale/NXP kernels whose configuration contains the
CONFIG_FSL_UTP option.
The /fat file is provided as a bootargs to the g_mass_storage driver
from U-Boot, see:
http://git.freescale.com/git/cgit.cgi/imx/uboot-imx.git/tree/include/
configs/mx6sabre_common.h?h=imx_v2015.04_3.14.52_1.1.0_ga#n116
Init scripts are provided so that the tool starts automatically at
bootup.
Tested on Nitrogen6_MAX + MFGTools.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- test return value from start-stop⁻daemon in init script, and
reindent the init script
- fix dependency of the comment
- rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the recent build issues have shown, gutenprint has optional libusb
support so ensure it is built after libusb if enabled for consistent
builds.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 84c825f8e8.
Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).
Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 0a767deba0.
Turns out that the custom help is not available when the $(O) directory
has not been configure yet (i.e. when there is no .config already
filled).
Rather than trying to work around this limitation with dirty hacks, just
revert this feature. After all, this will not prevent an external.mk
from providing custom help anyway; it's just not gonna be advertised nor
displayed with the main help.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to stm32f429_disco, this commit adds a configuration for the
Cortex-M4 based STM32F469 platform.
It requires a few kernel patches, which have already been submitted
upstream, as well as a small OpenOCD patch. Besides that, it re-uses
most of what has been added for the STM32F429 platform.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squash multiple patches from Lee Jones into one
- improve the readme.txt file
- sync the defconfig with the adaptations made to the stm32f429
configuration.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a defconfig for the STM32F429 platform, which is
based on a Cortex-M4 core from ST Microelectronics. It is therefore
the first noMMU ARM platform supported in Buildroot.
This commit includes some files that will be common to several STM32
platforms (hence in board/stmicroelectronics) and some files that are
specific to the STM32F429 (hence in
board/stmicroelectronics/stm32f429-disco). More specifically, this
commit adds:
- A minimal Busybox configuration, which is small enough to boot
without causing OOM on such small noMMU platforms. The resulting
Busybox, statically linked with uClibc-ng, weights around 220
KB. For now, this file is located in board/stmicroelectronics/, but
we might consider moving it to package/busybox/ in the future if
needed.
- A post-build script that removes the mounting of /dev/pts (not
enabled in the kernel and not very useful for a system that has no
network and no X), and removes the network related init script and
configuration files (no network support).
- A flash.sh script, to perform the right OpenOCD invocations to
reflash the board.
- One small kernel patch to adjust the kernel command line in the
Device Tree, since it's the only way to do so.
- The usual readme.txt file.
Signed-off-by: Lee Jones <lee.jones@linaro.org>
[Thomas:
- squashed multiple patches from Lee Jones together
- added the minimal Busybox configuration
- added the post-build script
- improved the flashing script to not hardcode the location of the
output directory
- add the small kernel patch
- improve the readme.txt file
- test on HW the resulting image, after using the internal toolchain.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the afboot-stm32 Makefile uses "CROSS_COMPILE =
arm-none-eabi-". Since I had such a toolchain installed on my system
when testing afboot-stm32, I didn't realize it wasn't using the
Buildroot toolchain.
However, using the Buildroot toolchain doesn't immediately works for
FLAT toolchains, as gcc automatically wants to create a FLAT
binary. So we need to adjust the afboot-stm32 Makefile to use directly
'ld' and not 'gcc' when linking.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClinux developers now have a Github with elf2flt code, with an
upstream that is again active. Let's switch to this upstream, which
has built-in support for ARM noMMU, contributed by Waldemar.
Since we're now fetching from github, a hash file is added as well.
Finally, we disable -Werror to avoid build issues caused by warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unfortunately gdk-pixbuf-query-loaders doesn't understand cross loaders
to update the cache, hence we can't use the host variant against target
loaders since it will output an effectively empty cache, causing runtime
failure of libgtk when finding icons.
So make host-gdk-pixbuf functionally equivalent to the target gdk-pixbuf
so we can run gdk-pixbuf-query-loaders against the host plugins and just
strip the host directory to make it runtime-compatible (like was done
before for the target directory).
This is still better than trying to update at runtime, since that would
require a writable loaders.cache file in tmpfs or rw filesystem, not to
mention the associated additional startup time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add host variant to be used by host-gdk-pixbuf to update the loaders
cache.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This helps to make sure that QT_SOCKLEN_T is defined to be 'int' only for legacy
glibc < 2 and not also for other libraries which may define it as per standards
but are not glibc, e.g. musl.
Fixes the following build error:
In file included from ../../include/QtNetwork/private/qnet_unix_p.h:1:0,
from kernel/qnetworkinterface_unix.cpp:46:
../../include/QtNetwork/private/../../../src/network/socket/qnet_unix_p.h: In function 'int qt_safe_accept(int, sockaddr*, int*, int)':
../../include/QtNetwork/private/../../../src/network/socket/qnet_unix_p.h:121:76: error: invalid conversion from 'int*' to 'socklen_t* {aka unsigned int*}' [-fpermissive]
Fixes:
http://autobuild.buildroot.net/results/709/709d547699596d09b4601a7940677d2010adeedf/http://autobuild.buildroot.net/results/f05/f0589e1d06404a7bd57f5734228afe45164e553d/
Backported from Qt5:
813f468a14
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-3994 - out of bound read in GIF loader
CVE-2011-5326 - divide by zero on 2x1 ellipse
Switch to sourceforge hashes.
And drop all previous patches, they're upstream, yay.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use "QT_LICENSE := $(QT_LICENSE), xxxx" construct to get rid of the
extra spaces before commas added by the font license clauses.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is a new conflict between Linux header (linux/if.h)
and C library header (net/if.h) introduced by this commit
to the Linux kernel:
1ffad83dffd675cd742286ae82dca7d746cb0da8
Mikko Rapeli is working on a solution, but it requires
changes to the Linux kernel and C library.
For now I would just disable the iptables feature in Strongswan.
The changes fixes following autobuild error:
http://autobuild.buildroot.net/results/e1693a714eb690988c1798b733d0ff143e50b3b9/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also:
- add a hash file.
- replace patch #0002 by passing the DEFAULT_TARGET to poco
- remove patch #0003 as it is obsolet since upstream commit
010f7a5370be450109f1726e39d5b193e63a6373
- remove patch #0004 which is applied upstream
- remove patch #0005 which is fixed by upstream different
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Henceforth, a sdcard.img file is automatically generated. It simplifies the
procedure to generate a bootable SD card for Atmel Xplained boards.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use genimage to generate a sd card with a fat partition (at91bootstrap,
u-boot, kernel, dtbs) and an ext4 partition (rootfs).
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cannelloni selects lksctp which depends on !BR2_STATIC_LIBS, but this
dependency was not propagated to cannelloni. Due to this, when
cannelloni was selected, lksctp-tools could be built even in a
BR2_STATIC_LIBS=y configuration.
We fix this by propagating the dependency. While we're at it, we
adjust the indentation of the cannelloni comment dependencies.
Fixes:
http://autobuild.buildroot.org/results/b589af984499c532951217eb500ff31e6655c63f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi has specific optimisation and configuration flags for RPi vs. RPi2.
Only configure for the RPi2 when we're sure (i.e. it is a cortex A7),
and fallback to con figuring for the RPi otherwise.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let's rework the board and config files to use genimage
to generate the SD card image directly.
[Peter: add host-mtools for genimage vfat handling]
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed out by Arnout, racehound does not require kernel headers
3.14-or-later. So, drop this depenency.
It stills require a kernel >= 3.14 to build and run, but we really
have no way to express that dependency as Kconfig options.
Besides, racehound does not build with kernel 4.5 because the struct
modules has been updated. Bump racehound to fix that build failure.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order for joysticks to be detected and used with this
driver, we need an xorg-server configuration file. This commit
installs such conf file to the default X11 xorg.conf.d path,
so we can at least provide a working template.
Users with specific needs can of course override it.
Signed-off-by: Ezequiel García <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use XDRIVER_XF86_INPUT_JOYSTICK_PKGDIR
- remove useless empty line.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd service files were supplied with old DBus bus name. After
service activation systemd was waiting for appearance of specified bus
name to consider it started successfully. However, if wpa_supplicant was
compiled only with new dbus interface name, then systemd didn't notice
configured (old) DBus bus name appearance. In the end service was
considered malfunctioning and it was deactivated.
Add upstreamable patch [1], which updates systemd service BusName
property according to configured DBus interface version.
[1] http://lists.infradead.org/pipermail/hostap/2016-April/035599.html
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Made use of github helper because no official tarball
is released.
Signed-off-by: Joris Lijssens <joris.lijssens@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
racehound requires a kernel >= 3.14 to be built and to run.
However, the current conditions on the corresponding comments are wrong:
- the comment about the kernel has a dependency on the requested
headers
- the comment on the toolchain features does not have this condition.
Thus, the comments are not shown/hidden under the appropriate
conditions, like in this situation:
- toolchain with headers < 3.14 (e.g. Sourcery CodeBench x86/x86_64
2012.09 with headers 3.5)
- kernel 4.5 enabled
this comment is shown:
racehound needs an Linux kernel >= 3.14 to be built
So, this is incorrect, because:
1- a kernel >= 3.14 is indeed to be built
2- the headers version mismatch is not reported
Fix that by moving the dependency on the kernel headers to the
appropriate comment and enhance it.
Since there is no way we can know the kernel version to be built, we can
not add such a condition; still, we leave the kernel message as-is.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2118 - A man in the middle can intercept any DCERPC traffic
between a client and a server in order toimpersonate the client and get
the same privileges as the authenticated user account.
CVE-2016-2115 - The protection of DCERPC communication over ncacn_np
(which is the default for most the file server related protocols) is
inherited from the underlying SMB connection. Samba doesn't enforce SMB
signing for this kind of SMB connections by default, which makes man in
the middle attacks possible.
CVE-2016-2114 - Due to a bug Samba doesn't enforce required smb signing,
even if explicitly configured.
CVE-2016-2113 - Man in the middle attacks are possible for client
triggered LDAP connections (with ldaps://) and ncacn_http connections
(with https://).
CVE-2016-2112 - A man in the middle is able to downgrade LDAP
connections to no integrity protection. It's possible to attack client
and server with this.
CVE-2016-2111 - When Samba is configured as Domain Controller it allows
remote attackers to spoof the computer name of a secure channel's
endpoints, and obtain sensitive session information, by running a
crafted application and leveraging the ability to sniff network traffic.
CVE-2016-2110 - The feature negotiation of NTLMSSP is not downgrade
protected. A man in the middle is able to clear even required flags,
especially NTLMSSP_NEGOTIATE_SIGN and NTLMSSP_NEGOTIATE_SEAL.
CVE-2015-5370 - Errors in Samba DCE-RPC code can lead to denial of
service (crashes and high cpu consumption) and man in the middle
attacks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And upstream switches tarball name yet again, so adjust SOURCE.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The conditional is wrong, it was check for BR2_PACKAGE_MESA3D_OPENGL_ES
(correct, means GLESv2 support) and BR2_PACKAGE_MESA3D_OPENGL_GLES
(incorrect, there's no such symbol).
So now check for BR2_PACKAGE_MESA3D_OPENGL_EGL (EGL support) plus
BR2_PACKAGE_MESA3D_OPENGL_ES (GLESv2 support), both are required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-iproute2-fix-building-with-musl.patch since it's upstream.
Add gentoo patch to allow for non-iptables builds.
Add new musl build fix.
Tweak 0001-Avoid-in6_addr-redefinition.patch since the first chunk is no
longer required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far, our LDFLAGS for the BR2_BINFMT_FLAT case were only used on
Blackfin. However, passing -elf2flt in LDFLAGS is wrong. Indeed,
LDFLAGS are not linker flags, but flags passed to the compiler when
linking.
If you pass -elf2flt to the compiler when linking, it is understood as
"-e lf2flt", i.e "the entry point is named lf2flt", which isn't
exactly the intention. We in fact need to pass -Wl,-elf2flt in LDFLAGS
as well, so that the compiler passes -elf2flt down to the linker.
For some reason, this option does not cause an issue with the Blackfin
toolchain, but it does with either a Buildroot toolchain for Cortex-M
or an OSELAS toolchain for Cortex-M. We have verified that passing
-Wl,-elf2flt continues to work with the Blackfin toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While musl has recently gained noMMU support for the sh2 platform, we
don't support this yet. So for the time being, let's not show musl as
an available C library on noMMU platforms. This is for example
important on ARM noMMU: ARM is supported by musl, but not its noMMU
variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc is not available for noMMU platforms, so it doesn't make sense
to show the comment about glibc requiring dynamic libraries on noMMU
platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building the musl C library on Thumb (Thumb1, not Thumb2), fails with:
{standard input}:20: Error: only lo regs allowed with immediate -- `mov fp,#0'
{standard input}:21: Error: only lo regs allowed with immediate -- `mov lr,#0'
{standard input}:25: Error: unshifted register required -- `and ip,a1,#-16'
Since there are no cores that we support that are Thumb1 only, use the
same solution as the one used by glibc: build the C library in ARM
mode.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The context functions in uClibc unconditionally use the classic ARM
instruction set.
On platforms that do support the ARM instruction set, there is no problem -
However, on platforms that only support the Thumb instruction set, the
context functions cannot be built since the assembler code is not
Thumb-ready. Therefore, these functions must be disabled on such
platforms. All Thumb1 platforms support ARM instructions, so this is
only relevant for Thumb2-only platforms (i.e., Cortex-M).
Note that some packages require the context functions, so these will
fail to build on these platforms. It is worth mentioning that musl
also doesn't provide the context functions, and those are rarely
used. Affected packages will be handled in later patches.
[Peter: slightly reworded]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClibc patches to simplify the ARM Thumb configuration options
have been merged, but instead of being 5 separate patches, they have
been merged as a single patch.
This commit updates the Buildroot uClibc package to use the patch that
was actually upstreamed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 11573f5a14 ("sawman: remove
package"), we removed the sawman package, but forgot to remove the
hash file of that package. This commit finalizes the removal by
getting rid of the hash file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2015-6360: Prevent potential DoS attack due to lack of bounds
checking on RTP header CSRC count and extension header length.
Also, add a hash file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since quite some time, the kernel and bootloader communities consider
zImage as the default format for kernel images on ARM, replacing
uImage. The load address information in uImage is no longer needed,
since the kernel is position-independent in terms of physical address,
except on a few old platforms. For most people, using zImage is simply
better/simpler, so let's switch to zImage as the default image format
on ARM.
All defconfigs are updated: 46 defconfigs no longer need to select
explicitly zImage because it's the default, and 16 defconfigs now need
to explicitly select uImage because that's no longer the default.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Matt Weber <matt@thewebers.ws>
Acked-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From configure.ac lines 83-89:
AC_ARG_ENABLE(egl, [ --disable-egl],,
enable_egl=yes)
AM_CONDITIONAL(ENABLE_EGL, test x$enable_egl = xyes)
if test x$enable_egl = xyes; then
AC_DEFINE([ENABLE_EGL], [1], [Build Weston with
EGL support])
PKG_CHECK_MODULES(EGL, [egl glesv2])
PKG_CHECK_MODULES([EGL_TESTS], [egl glesv2 wayland-client
wayland-egl])
It also requires wayland-egl which is only provided by mesa3d for now,
hence make it conditional on mesa3d egl+gles.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes (no CVEs yet):
Buffer over-write in finfo_open with malformed magic file.
Invalid memory write in phar on filename with \0 in name.
Parsing of tar file with duplicate filenames causes memory leak.
php_snmp_error() Format String Vulnerability.
Integer Overflow in php_raw_url_encode.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From v6 to v7 just few changes were made for performance improvement and
compatibility.
Switched from git download to source tarballs and hashes.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches upstream so drop them.
The 'bat' binary utility was renamed to 'alsabat' probably to avoid some
clash, keep the old .config symbol to avoid pointless legacy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These three are Zynq boards and the build procedure is almost the
same. Having the SoC name prefix "zynq_" would be more consistent.
Also, this is the way in which the Linux Device Trees and the U-Boot
configuration files do.
This commit renames as follows:
zedboard_defconfig -> zynq_zed_defconfig
microzed_defconfig -> zynq_microzed_defconfig
xilinx_zc706_defconfig -> zynq_zc706_defconfig
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently systemd getty services ignore baudrates set in buildroot in
favour of a hardcoded 115200. This patch SEDs out that hardcoded value with
what is selected.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-1950 - Fixed a heap-based buffer overflow related to the
parsing of certain ASN.1 structures. An attacker could create a
specially-crafted certificate which, when parsed by NSS, would cause a
crash or execution of arbitrary code with the permissions of the user.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we use unbundled ffmpeg the licensing becomes much easier.
Relevant code is under ext/*, which according to COPYING and comments is
GPLv2+, except for ext/libswscale/gstffmpegscale.c which is LGPLv2+ -
however that's not built/used when using system ffmpeg.
The code under gst-libs/ is the bundled ffmpeg itself.
Tests are under LGPLv2+ as well but we don't build them since we
disabled gst-check support in the gstreamer1 package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It avoids the crazy in handling all of the ffmpeg options here as well,
and potentially avoids target code duplication, hence resulting in a
size reduction.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: extend help text as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The format of the ACL database in tvheadend has changed, and generating
a default user is a little bit more involved than just dumping a file in
the correct locations: filenames are now md5sum (of something?) and the
usernames and passwords now have their own DB.
However, tvheadend has a wizard mode, where it is possible to configure
the basic features, of which creating an admin user.
We remove our canned ACL database, and change the startup script to
start in wizard mode on first run. We also switch to using our infra to
set the permissions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Remove the bundled sqlite unconditionally, as we always want to use
the external sqlite.
- Remove the --with-system-sqlite option as is only valid for the
bundled sqlite configure script which we will no longer use.
- Do not remove TDBC when BR2_PACKAGE_SQLITE is not selected as it may
be used for other TDBC drivers such as MySQL or PostgreSQL.
Fixes:
http://autobuild.buildroot.net/results/022/02296f8624d3406a63d3a179f53862f245c56dc1/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those [0-9] expressions are needlessly complex, and they actually no
longer work now that sqlite3.11.0 is bundled internally (11 is two
digits, which was accounted for).
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
aer-inject allows to inject PCIE AER errors on the software level into
a running Linux kernel. This is intended for validation of the PCIE
driver error recovery handler and PCIE AER core handler.
Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
[Thomas:
- tweak commit log
- rewrap Config.in help text
- remove useless AER_INJECT_MAKE_OPTS variable, use
TARGET_CONFIGURE_OPTS directly
- add missing newline at end of .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a toolchain is glibc based, the getent package assumes that
$(STAGING_DIR)/usr/bin contains the getent program. Unfortunately, the
Codescape MIPS toolchains do not conform with this:
$(STAGING_DIR)/usr/{bin,sbin} are empty, and instead three directories
are provided: bin-o32, bin-n32 and bin-n64 (ditto for sbin), one for
each supported MIPS ABI.
Since this is a toolchain-specific oddity, we handle it by adding a
post-install fixup hook that creates $(STAGING_DIR)/usr/{bin,sbin} as
symbolic link to the appropriate directory.
Fixes:
http://autobuild.buildroot.org/results/9c0ee836021553319f166f9de88750535aee0a58/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It only provided the host variant, which was only used by crda (no
longer necessary), and wasn't available as a host selection.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an upstream-submitted (but not accepted) patch in order to allow
crda to be built with python2 as well as python3.
This drops m2crypto usage (python2-only) in favour of pycrypto which can
be built against both major versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's in the rpi backend block which makes no sense, and it depends on
xwayland being enabled which we currently don't support so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The weston-launch supplemental group is for users to be able to
use/launch weston.
For a full weston(-launch) experience users should be at least members
of weston-launch, video (for framebuffer permissions) and optionally
audio.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When it's enabled set the default weston backend to fbdev, otherwise the
drm backend is the default even though we are not building it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch makes below changes to powerpc-utils package:
- Update to latest upstream version (v1.3.1)
- Update License (from CPL to GPLv2)
- Update source link (from SF to github)
- Disable librtas by default
- Finally make necessary adjustment to compile the source
(run autogen.sh before ./configure as we don't have configure in new tarball).
RTAS:
This package contains few tools (like nvram, ppc64_cpu, etc) which are not
dependent on RTAS support. Traditionally we always had RTAS support (at least
on IBM Power system). But now a days we do have environments like PowerNV host
where we do not have RTAS support. Instead we use OPAL for runtime service [1].
Hence lets disable RTAS by default. If someone wants to build powerpc-utils
with RTAS they can enable it.
[1] https://github.com/open-power/skiboot.git
Signed-off-by: Vasant Hegde <hegdevasant@linux.vnet.ibm.com>
[Thomas: re-add hash file, fix license, it's GPLv2+, improve commit title.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As indicated by the uClibc-ng source code, the NPTL thread
implementation is only available on MMU platforms, so we replicate
this dependency in Buildroot so that the appropriate thread
implementation is chosen by default on ARM noMMU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As explained by Waldemar, enabling DOPIC in uClibc will lead to the
creation of a Position Independent library. In turn, this will cause
elf2flt to generate a "Has-PIC-GOT" flat binary, which doesn't work on
ARM. In fact, elf2flt on ARM really expect to have non-PIC code as
input, so we must disable DOPIC in the uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Older gcc were not capable of building a uClibc library, with threads
enabled, in Thumb1. However, the issues have been fixed since gcc 4.9,
so this commit narrows down the condition to just gcc 4.7 and 4.8.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a number of patches to uClibc that radically
simplifies the Thumb handling. uClibc currently has three options that
you need to toggle on Thumb configurations depending on the specific
ARM CPU being targeted.
However, it turns out that none of those options are necessary:
- USE_BX can simply be guessed by looking at the ARM core being
used. The bx instruction is available for all ARM cores >=
ARMv4T. This is exactly what glibc is doing.
- USE_LDREXSTREX can also be guessed by looking at the ARM core being
used: whenever you have Thumb2, ldrex/strex is available.
- COMPILE_IN_THUMB becomes useless, since all it does is passing
-mthumb. But just like the uClibc config options to set
--march=<foo> have been removed a long time ago, there's no need to
-have an option to pass -mthumb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mesa3d can in fact build the DRI infrastructure/drivers just fine
without lingering x11 libs around, it just needs libdrm & friends which
are already accounted for.
So make the libGL (full OpenGL) providing abilities dependant on x11
being present.
It serves it's purpose for EGL+GLES hardware acceleration, and can in
fact be built without them, but it's probably not very useful (still,
leave the option for people inclined to do so).
Simple test defconfig:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed patches applied upstream. This version bump is needed to
provide support for ffmpeg 3.0:
278747ba45
Use BR2_PACKAGE_FFMPEG_AVRESAMPLE by default because OpenCV can use it
after
2b2e3ee93c
Before this patch:
-- FFMPEG: YES
-- codec: YES (ver 57.24.103)
-- format: YES (ver 57.25.100)
-- util: YES (ver 55.17.103)
-- swscale: YES (ver 4.0.100)
-- resample: NO
After this patch:
-- FFMPEG: YES
-- codec: YES (ver 57.24.103)
-- format: YES (ver 57.25.100)
-- util: YES (ver 55.17.103)
-- swscale: YES (ver 4.0.100)
-- resample: YES (ver 3.0.0)
Disabled new options:
WITH_MATLAB, WITH_VA, WITH_VA_INTEL, DOWNLOAD_EXTERNAL_TEST_DATA
Removed obsolete option BUILD_opencv_hal
Removed options WITH_OPENGL & WITH_OPENMP from the "Disabled features"
block because they have their own ifeq-block later on.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linphone 3.6 is incompatible with bumped mediastreamer and ortp
packages. Like Debian we use the bundled versions instead and add the
Debian patch series to support ffmpeg 3.0
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version bump is needed to provide support for ffmpeg 3.0.
Removed 0001-misc-fixes.patch which previously provided patches to
support newer ffmpeg versions. This is not needed anymore after
this upstream commit:
5e653bfe4c
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump is needed by mediastreamer 2.12.1, the mediastreamer
bump is needed to provide support for ffmpeg 3.0.
Removed srtp option after srtp support was removed from ortp:
5e37fa55f1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of installing login.pam (/etc/pam.d/login) from util-linux
conditionally do so unconditionally from linux-pam.
If busybox login is pam-enabled (linux-pam package enabled) it will be
required, otherwise it will lead to a system where login won't work, and
if util-linux is enabled it will supercede busybox login and will be
necesarry regardless.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installer is a 32-bit executable, so we need the 32-bit libraries on
the host to be able to execute it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
owserver is started unconditionally, but it needs the device(s) to
be specified at startup. Therefore a check for non-empty OWSERVER_ARGS
is added to the owserver start script.
owfs is started only if is built. It will connect to the owserver.
It will try to load the fuse module; if fuse is built-in or already
loaded, modprobe -q will fail silently. The filesystem will be mounted
on /dev/1wire, because it represents the 1-wire slave devices; also,
the bundled Debian init scripts mount it there. We have to create that
directory in the init script in case of devtmpfs, and we have to create
it in the rootfs for static /dev; for simplicity, just do both.
Users who want a setup without owserver need to remove the owserver
init script post-build and need to give appropriate defaults to owfs.
[Peter: fix mountpoint variable typo in S30owfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If OpenGL is enabled then enable cairo-gl.
However if GLESv2 is also present we must choose which implementation to
use.
Since normally OpenGL is more featured, has more dependencies and
wouldn't be present "by accident" it seems like the logical choice to
win over it.
This feature is useful for webkitgtk's accelerated 2d canvas.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Raptor is a free software / Open Source C library that provides a set of parsers
and serializers that generate Resource Description Framework (RDF) triples
by parsing syntaxes or serialize the triples into a syntax.
http://librdf.org/raptor/
Patch added in the package:
0001-configure.ac-remove-conditional-lib-inclusion.patch
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Nitin Mendiratta <nitin.mendiratta@rockwellcollins.com>
[Thomas:
- add else clause for the three optional dependencies, as suggested
by Baruch.
- fix they yajl optional dependency, as noticed by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All Qt5 packages gained the GPLv3 license option and all the documentation
is now under GFDLv1.3 license (except qt5websocket and qt53d)
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 7bac31ceea.
This commit is no longer needed, since libdrm no longer needs arm >=
v6 support thanks to the fix to the CAS implementation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARM patch that was added in commit
94841d87fd ("libdrm: fix support for
xserver with Vivante drivers") makes the assumption that ldrex/strex
is available on ARM. While this is true on ARMv6+, it is not true on
ARMv4/ARMv5. Due to this, we had to make follow-up commits like
7bac31ceea
("package/x11r7/xserver_xorg-server: dri needs arm >= v6") and more is
needed in the reverse dependencies to disable DRI usage on
ARMv4/ARMv5.
In fact, it turns out that the CAS code in libdrm is only an
optimization, and it will gracefully fall back to a system call based
lock/unlock mechanism.
So we simply change the patch to only provide the optimized CAS
implementation on ARMv6+. The original reason for this patch was to
fix Vivante drivers, and Vivante GPUs are only used in ARMv6+ cores,
so we should be fine (famous last words).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The luajit Makefile has the following logic:
$(LDCONFIG) $(INSTALL_LIB) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT1) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT2) || :
So if ldconfig fails for some reason, the symbolic links to refer to
the luajit library are not created. Since ldconfig for the target
didn't make sense, LDCONFIG=true has been added a long time ago when
building the target variant of luajit.
However, since commit 9ba8d1cce4, the
host variant of luajit is also linked dynamically. While ldconfig for
the host should work, on certain machines ldconfig is not available in
the PATH, and needs to be explicitly called as
/sbin/ldconfig. However, since output/host/usr/lib is in the RPATH of
the binaries we create, there is really no need to bother running
ldconfig, so we simply pass LDCONFIG=true, like we do for the target
variant. This ensures that the symlinks are always created.
Fixes:
http://autobuild.buildroot.net/results/4dc/4dcbcde0046e265317e170a977e699e5c3a06b87/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
[Thomas: rewrite commit log with a proper explanation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The version bump doesn't inherently fix the security issues, however the
added CVE patches do, which fix:
CVE-2016-2147 - out of bounds write (heap) due to integer underflow in
udhcpc.
CVE-2016-2148 - heap-based buffer overflow in OPTION_6RD parsing.
Drop patches that are upstream as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target name is qt5base, not qt5.
[Peter: extend commit message]
Signed-off-by: David Picard <davepiq@yahoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It was accidentaly dropped in the loaders cache rework, shame on me.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0003-thread-Posix-Mutex-Cond-use-constexpr-only-with-glib.patch is
upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version of Qwt is compatible with both Qt and Qt5. This patch
adds the option to compile it for Qt5.
Signed-off-by: David Picard <davepiq@yahoo.fr>
[Thomas: slightly adjust the OpenGL dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rework the selection of Qt options in the qwt package to make it
easier to support other versions of Qt than just Qt4. Instead of
depending on Qt options, we select the ones we need, and simply have a
global "depends on BR2_PACKAGE_QT". This also allows to remove a
comment that becomes useless.
Signed-off-by: David Picard <davepiq@yahoo.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were two readme files (one for flashing on NAND and one to create a
SD card) in different places. Merge them and update the SD card
generation part since all Xplained boards are supported and the -u
option of sfdisk is obsolete on latest versions.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: adjust the explanations, move the SD card section after the
NAND flash section.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig allows to build all the components to boot from a sd card on a
SAMA5D2 Xplained board. For more details, please read the
board/atmel/readme.txt file.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variant of SAMA5D4 Xplained defconfig file allows to boot from a SD
card.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: remove host-samba from the package selection, not needed when
booting from SD card.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unify and update the defconfig files for Atmel Xplained boards:
- use at91bootstrap as first stage bootloader instead of u-boot spl
- build all dtb variants
- bump to linux4sam_5.2
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the commit f67a4f50e2 "gcc: preserve CXXFLAGS_FOR_TARGET"
target CFLAGS are passed to all libraries bundled with gcc. This breaks
libsanitizer on gcc-4.9.x when building with _FILE_OFFSET_BITS=64:
error: size of array ‘assertion_failed__837’ is negative
...
libsanitizer/sanitizer_common/sanitizer_platform_limits_posix.cc:837:1:
note: in expansion of macro ‘CHECK_SIZE_AND_OFFSET’
CHECK_SIZE_AND_OFFSET(dirent, d_ino);
This issue is fixed in the libsanitizer mainline and in gcc-5.x.
There's no issue with gcc-4.8.x and earlier.
Reported-by: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Backported from: https://llvm.org/svn/llvm-project/compiler-rt/trunk@220328
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create the gdk pixbuf loaders cache file at build time rather than run
time, since the root filesytem can be read-only.
We also didn't cater for systemd-based systems, so this solves two
issues at once.
The only side-effect is that we must now pull host-gdk-pixbuf into
target gdk-pixbuf dependencies, but generally users will have gdk-pixbuf
selected if they use libgtk2/3 which already pull in host-gdk-pixbuf.
And remove initscript correspondingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libaio support is now automatic so drop the enable/disable (it will fall
back to pthread aio if libaio is not present).
0002-build-improve-stack-protector-check.patch is upstream so remove it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jan Viktorin <viktorin@rehivetech.com>
[Thomas: add Altera in the option name and description, drop reference
to Go being needed and to Maxime Hadjinlian's version of mkpimage
since a C version is now used.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tool helps to create a working SPL to boot Altera SoC FPGA boards.
The code of mkpimage is integrated directly from the Barebox repository
as stated in the 'mkpimage.mk' file.
This tool is *NOT* necessary for any other boards so far.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Jan Viktorin <viktorin@rehivetech.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
vala/valac can use gir and vapi data files installed by other packages,
but since these are normally installed to staging and host-vala looks
for them in the host directory (logically) this leads to failure.
So wrap them to call the real tool and add this information via
command-line parameters to them.
This is required for vala-in-vala bindings (vapi).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to system/unbundled pcre since it's the default and recommended
by upstream now.
It's also good security practice since pcre patches won't get updated in
the bundled version inside glib so often.
As stated in glib's NEWS:
Overview of changes in GLib 2.47.5
* the system copy of PCRE is now used by default to implement GRegex.
Configure with --with-pcre=internal if a system PCRE version
is unavailable or undesired.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
They're required for host-libglib2 and using system pcre is the
default/recommended with newer versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Erlang/OTP 18.3 is a service release on the 18 track with mostly bug
fixes, but is does contain a number of new features and improvements as
well.
Some highlights of the release are:
. New statistics info about runnable and active processes & ports.
Call erlang:statistics with: total_run_queue_lengths |
run_queue_lengths | total_active_tasks | active_tasks.
. Time warp improvements: dbg:p/2 and erlang:trace/3 with
monotonic_timestamp |strict_monotonic_timestamp.
. Introduced a validation callback for heart.
. The module overload in sasl has been deprecated.
. ~90 contributions since 18.2
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mark the wayland backend as good again since the bump and consequent
protocol version match fixes it.
Drop upstream 0004-Fix-undefined-reference-to-get_xkb.patch
Drop unnecessary 0005-do-not-build-extract-strings.patch
(extract-strings doesn't exist any more).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package consists of scripts that setup cgroups at boot without
doing any cgroup management or classification of tasks into cgroups
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
[Thomas:
- rename to cgroupfs-mount to match upstream
- add proper hash, since hashes should be added for github sourced
packages
- fix minor typos in the init script
- fix the license file information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Use the recently introduced BR2_TOOLCHAIN_HAS_ATOMIC boolean.
- Import an upstream patch to fix error handling when atomic operations
are not detected. Without this patch the build fails due to a syntax
error instead of showing the proper message.
- Add a patch to configure.ac to check if libatomic is needed and force
linking to it (we will attempt to submit this upstream).
- Disable build for SPARC64 because it fails due to a missing definition
of Atomic64.
On PowerPC, the __atomic_*() built-ins for 1-byte, 2-byte and 4-byte
types are available built-in. The corresponding built-ins for 8-byte
types, however, are implemented via libatomic, so requiring gcc >= 4.8.
In Buildroot, to simplify things, it was decided to require gcc 4.8 as
soon as the architectures has at least one __atomic_*() built-in variant
that requires libatomic.
Since protobuf most likely only uses the 1, 2 and 4-byte variants, it
*could* technically build with gcc 4.7. This is probably not a big deal,
and we can live with requiring gcc 4.8 on PowerPC to build protobuf. The
same restriction applies to SPARC.
The build for SPARC64 breaks even using the master branch of protobuf
due to undefined references to some NoBarrier_Atomic*() functions.
Signed-off-by: Henrique Marks <henrique.marks@datacom.ind.br>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we were assuming that whenever you have gcc 4.8, libatomic
is available. It turns out that this is not correct, since libatomic
will not be available if thread support is disabled in the toolchain.
Therefore, __atomic_*() intrinsics may not be available even if the
toolchain uses gcc 4.8.
To solve this problem, we introduce a BR2_TOOLCHAIN_HAS_LIBATOMIC
boolean, which indicates whether the toolchain has libatomic. It is
the case when you are using gcc >= 4.8 *and* thread support is
enabled. We then use this new BR2_TOOLCHAIN_HAS_LIBATOMIC to define
BR2_TOOLCHAIN_HAS_ATOMIC.
As explained in the comment, on certain architectures, libatomic is
technically not needed to provide the __atomic_*() intrinsics since
they might be all built-in. However, since libatomic is only absent in
non-thread capable toolchains, it is not worth making things more
complex for such seldomly used configuration.
Note that we are introducing the intermediate
BR2_TOOLCHAIN_HAS_LIBATOMIC option because it will be useful on its
own for certain packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: improve Config.in comment using a suggestion from Yann.]
While building libevas.so for the host-efl with luajit support, the link fail
when libluajit is build statically:
/usr/bin/ld: output/host/usr/lib/libluajit-5.1.a(ljamalg.o): relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
output/host/usr/lib/libluajit-5.1.a: error adding symbols: Bad value
collect2: error: ld returned 1 exit status
Build luajit dynamically in order to build host-efl with luajit support.
Also, passing HOST_LDFLAGS is needed so that a proper rpath is added
to the resulting binaries. Note that it is expected to have
HOST_LDFLAGS assigned to TARGET_LDFLAGS, it's just that luajit has a
somewhat non-conventional naming of variables. This is needed to avoid
the following error from the rpath sanity check:
***
*** ERROR: package host-luajit installs executables without proper RPATH:
*** output/host/usr/bin/luajit
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was added to the networking category close to connman for the ability
to tweak connman features without going around (i.e. add support for
wifi and so on).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove source schema files from target
(/usr/share/glib-2.0/schemas/*.dtd and *.xml) at target finalization
time.
This is because other packages install schemas as well to avoid
duplicating file removal efforts all around.
Add a schema compiler run on target finalization as well - we previously
didn't do this since not many packages use it, however the upcoming
connman-gtk package does require a valid gschemas.compiled to work
properly.
We also do this at target finalization to avoid each package handling
this on their own.
Purge some extra binaries and files from the target, like the schema
compiler to save additional space since they're unused at run time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: independently done a patch similar to the one
by Thomas]
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds the ability to compile and install the kernel
selftests into the target at /usr/lib/kselftests. The rationale behind
/usr/lib is that the selftests have subdirectories where they are
installed which makes them unsuitable to be placed in /usr/sbin as
this would result in /usr/sbin/kselftests/x/y/z. While the selftests
aren't libraries either, they don't achieve much as a standalone
binary so they can be considered to be a 'library of tests' making
/usr/lib sensible.
The selftests require that the kernel headers be installed into the
kernel build tree as some of the selftests have a hardcoded CFLAGS to
include kernel headers (CFLAGS += -I../../../../usr/include/). This is
most easily achieved by using the make ... headers_install inside the
kernel build dir.
This is likely to be a rarely used debugging/performance feature for
development and unlikely to be used in a production configuration.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- remove bash as a build dependency, it is only a runtime dependency.
- fix typo in the Config.in help text, and rewrap
- add missing 'depends on BR2_USE_MMU' dependency for the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The optinal dependency on celt is not added, because we only have
celt-0.5.1 and jack2 requires celt >= 0.5.2 (even though it does look
for celt >= 0.5.0, it does not build with celt- < 0.5.2). Since we
cannot upgrade celt (for now), we just never make jack2 depend on
celt051, and it won't find it either, as it just searches for celt.pc
and we have celt051.pc.
As well, the dependency on eigen is only useful in conjunction with
gtkiostream, for which we do not have a package. So, we don't need to
depend on eigen.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jack2 allows to use three modes:
- A legacy jackd service alone.
- A DBUS jackd service alone.
- A mixture between the standalone jackd and the DBUS jackd.
This patch adds the possibility to choose between these three modes,
while the legacy jackd was the only option before.
In addition, the jack_control tool is removed when the DBUS jackd is not
available, as this tool is used to control it.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase
- only use two booleans, not a choice
- python is a runtime-only dependency
- use python3 if enabled, fallback to python
- simplify post-install condition
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: fix minor typo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For wayland 1.10+ they're split from wayland core and required by
weston.
Hide it behind the wayland package since it's useless independently even
though it can be "built" and installed.
And it makes no sense to install to target since they are DTDs used at
build-time.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move it outside x11r7 scope since it can be built without it with a few
patches (sent upstream via github pull request).
Motivation is simple, it's a dependency for newer gtk3 versions which
can work with a wayland or broadway backend, and having a full x11 stack
is pointless for that scenario.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: split the first patch into four separate patches, since
that's how they were submitted upstream.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need to match xserver here, since we need glamor support there in
order to enable it here, hence need to match the dependencies.
For xserver it needs dri3proto+libepoxy, however if only libepoxy is
present then glamor would be disabled for the server but enabled for the
driver, leading to build failure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the option to select the Cortex-M4 ARM core, in the
same family as Cortex-M3. This will be useful to enable the internal
toolchain backend for this ARM core, and provide some defconfigs for
Cortex-M4 platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Cortex-M cores only support Thumb-2, not Thumb. In fact, Thumb-2
is a superset of Thumb, and we could have a single option for both in
Buildroot, since -mthumb on ARMv4/v5 means original Thumb, while
-mthumb on ARMv7 means Thumb 2. However, for clarity, it makes sense
to have two separate options. But in this case, Cortex-M3 should not
advertise that it supports Thumb, as in fact selecting Thumb would
generate Thumb-2 code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ethernet is not working, but at least you get a shell and
can test applications for m68k.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
some new runtime options, minor fixes, and fixes for issues found by
various code analyze and lintian tools.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using a br2-external tree, it is possible (as stated in our manual)
to implement whatever arbitrary extra make rules (such as flashing a
board, or extracting the rootfs in an NFS export...). Some of those
extra rules might be exposed to the user as new entry points that the
user can call by itself.
However, there is no way for the br2-external to advertise those new
rules in the help text.
We add the possibility to do so, by adding a new make rule, called
help-custom, advertised in our own help info.
It is up to the br2-external tree to provide whatever help text is
deemed necessary. The format of the help is completely free-form.
Note that we need to provide an empty, dummy help-custom rule, since it
is always advertised (making it .PHONY does not work). Since this rule
is empty, make gently reports that there is "Nothing to be done for
`help-local'", which is pretty well fitting when help-local was not
provided (either because there's no br2-external tree, or when the
br2-external tree does not provide it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As we currently download the actual sources as part of saving the
legal-info, we do not check the hashes of those downloads.
That's because, during legal-info, there is not package involved, and
thus there's no path to an actual .hash file.
However, this precludes legal-info from working in off-line mode. A
subsequent patch will make it possible to do so, and actual sources will
be downloaded as another classical package download.
This will have two consequences:
- first, we will be able to add hashes for actual sources, so we can
ensure their integrity,
- second, and as a direct consequence of the above, when a .hash file
is present, it would have to list all the hashes for that package,
or that would be treated as an error.
Currently, the only package that falls in this case is the external-
toolchain, for which we have means to retrieve the sources for some of
the toolchains.
So we just add hashes for those actual external-toolchain sources we may
have to download.
Those hashes are not used for now, but they'll come into play a few
patches down.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a BR2_PACKAGE_WEBKITGTK24_HTTPS to pull in required dependencies for
HTTPS protocol support.
This is almost essentially the same as using midori with HTTPS enabled,
however Midori's HTTPS support is based on glib-networking, and webkit
via libsoup-ssl (for MiniBrowser, it doesn't affect midori's support).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a BR2_PACKAGE_WEBKITGTK24_MULTIMEDIA option that will select/pull in
the basic required components in order for a few multimedia websites
(HTML5 video) to work.
Tested with videojs.com & youtube.com
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forcefully disable the features that have optional dependencies that are
not enabled in Buildroot.
Disable support for bionic since, well, we're not Android.
Slightly re-order the variables to have semantically-related variables
together, with features last.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
perf does not honour the -j flags we pass to make; it yet again tries to
reinvent the wheel and by default uses the number of CPUs as the number
of parallel jobs.
Fortunately, in their infinite wisdom, the insane developpers of the
perf buildsystem were kind enough to provide us with a variable we can
set to specify the number of parallel jobs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The perf buildsystem, inside the kernel, is not really amenable to be
easily used...
Regarding the documentation, it will forcefully try to detect asciidoc
and, with the latest versions, xmlto, completely disregarding what the
user may provide.
We currently pass ASCIIDOC= (the empty string) on the make command line,
as an attempt to disable building the documentation, but that has no
effect whatsoever on perf: that variable is not passed down to the
sub-sub-make (yes, a two-level depth) that is responsible for building
the documentation.
We really do not want to build any of the documentation (the user can
refer to the documentation on his own development machine), so we use a
little dirty trick: we provide a GNUmakefile beside the existing
Makefile for the documentation; GNUmakefile always takes precedence over
a Makefile when both are present. We only provide a catch-all-no-recipe
rule in that GNUmakefile, so it really does nothing useful, except avoid
building the documentation.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add basic epdc firmware copy to correct output path
- Move legacy epdc firmware to this package out of kernel
- VPU firmware upgrade to v3.1.1_r46070
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/0fdf829
This package has been implicitely tested through gstreamer as the
plugins rely on them for vpu decoding for instance:
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- Support AVcVuiInfo for Decoder through DecInitialInfo or DecOutputInfo
- Clear structure iram IOGetIramBase() fails to set them to avoid
using uninitialized variables.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/be030922
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version is released with 3.14.52-1.1.0_ga release.
Includes many of the bug fixes and stability improvements.
For more information refer to i.MX Linux Release Notes from NXP website:
L3.14.52_1.1.0_LINUX_DOCS package is under Supporting Information.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/f1161869
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog:
- Add frame rate check and return failure if frame rate is invalid
value (<=0)
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/67b3b998
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog since 4.0.7:
-Support hevc in MPG2 parser.
-Enhance the parsing conditions in SPS nal unit.
Parse system header to get stream id.
For mpeg video, don't call parseh264 to avoid mistakes.
-Fix memory leak, free temp data buffer after parsing header.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/c3aa06b3
This package has been implicitely tested through gstreamer as the 0.10
plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog since 4.0.7:
- Version alignment with other Multimedia components.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/6a1f559a
This package has been implicitely tested through gstreamer as the 0.10
plugin relies on it:
# gst-launch-0.10 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 604095fe9b ("libcap: add
patch to fix build issue with old kernel headers"), libcap builds fine
with headers < 3.0, so it is no longer the reason why lxc needs
headers >= 3.0.
However, lxc uses setns(), which is only available since kernel 3.0,
so we simply update the comment next to the dependency so that it is
accurate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that libcap no longer needs kernel headers >= 3.0, we can remove
this dependency from lxc. However, building with headers 2.6.32
exhibits a build issue caused by the redefinition of the setns()
function.
Since setns() is not implemented in the C library, lxc provides its
own version. However, for some reason, while the C library doesn't
implement setns(), it provides a prototype for it, which is not
exactly the same as the one in lxc, causing a build failure. We re-use
a solution implemented in gdb to solve the same problem: define in lxc
a function called do_setns(), which calls setns() when available, or
manually does the system call otherwise.
Of course, with old kernels the system call will not be available, so
things will fail at runtime, but this was anyway already the behavior
of lxc's setns() dummy implementation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of bumping to version 0.9.3a, two patches are dropped because they
are already upstream.
Signed-off-by: Joshua Henderson <digitalpeer@digitalpeer.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpjsip bundles several third party libraries. In Buildroot we prefer
either not to build them or to depend on a proper package for each of
them. The current recipe disables most of them, but not all, so
disable the remaining ones.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The -rpath option was being stripped from sdl-config via a post install
staging hook, but the same wasn't being done for sdl.pc. Because of
this, packages that detect SDL via pkg-config ended up passing
'-Wl,-rpath,/usr/lib' to the linker, which caused build failures under
certain circumstances since libraries were being looked for in the wrong
directory.
Fix by passing the --disable-rpath option to the SDL configure script,
which takes care of disabling -rpath everywhere. This also allows the
SDL_FIXUP_SDL_CONFIG hack to be completely removed.
Fixes:
http://autobuild.buildroot.net/results/624/62499217eeaf3228b46652e3f65776d7ece8fce6/http://autobuild.buildroot.net/results/cc1/cc1f78f6c43e3a7bf3ed80d759d9c4d7363d0e48/
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the libcap package has a patch that makes it build with
kernel headers < 3.0 (which was needed for the host variant of
libcap), there is no longer a need to have a dependency on headers >=
3.0 for the target variant of libcap.
All reverse dependencies of libcap are handled in this commit, except
lxc, which will be handled in a separate commit since it needs some
special solution.
The build of all those packages has been tested with a toolchain that
uses kernel headers 2.6.32, which is the oldest that our default glibc
version accepts to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Old kernels (before 2.6.36) were defining XATTR_NAME_CAPS in
<linux/capability.h>, but using XATTR_SECURITY_PREFIX and
XATTR_CAPS_SUFFIX which were defined in the kernel-only part of
<linux/xattr.h>.
In kernel 2.6.36 (commit af4f136056c984b0aa67feed7d3170b958370b2f),
the XATTR_NAME_CAPS definition was moved to the kernel-only part of
<linux/xattr.h>. It's only in kernel 3.0 (commit
1dbe39424a43e56a6c9aed12661192af51dcdb9f) that <linux/xattr.h> was
fixed to expose XATTR_NAME_CAPS and the related definitions to
userspace.
This is the reason why the target variant of libcap has a dependency
on headers >= 3.0 for the moment.
However, this doesn't solve the problem for the host variant of
libcap, which doesn't build properly on old systems.
To solve this, we simply add a patch that defines the missing
definitions. Their values haven't changed over time since they are
part of the kernel to userspace ABI.
Fixes:
http://autobuild.buildroot.org/results/856b71bccf14c3334a8c0fc66c1d985b09734313/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though it's inherited by the python dependency it's more clear this
way for graph-depends, since it's used by the waf buildsystem.
And even though we have a hard dependency on python for the distro this
python could ostensibly be 3.x which isn't compatible with the bundled
waf series (1.5.x) in samba (as of current shipping version and upcoming
4.4.x series).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, these flags are recursively propagated. This behavior is
not expected by users, because it can cause dependencies explosively.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, without the flag -recommend, scancpan takes as dependency
only one which has the relationship "requires"; this mode works fine.
And, with the flag -recommend, scancpan takes all ones (ie. with
relationship "requires" or "recommends") in the same way; this mode
never works fine, because it is too simplistic.
With this commit, the "not required" dependencies are handled as
optional BR package or skipped if a cyclic dependency is detected.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 2dcab526a9.
Now that gcc correctly propagates CXXFLAGS_FOR_TARGET for libstdc++
build this is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-4.7.x, gcc-4.8.x and gcc-4.9.x don't propagate CXXFLAGS_FOR_TARGET to
CXXFLAGS for libstdc++ build. As a result libstdc++ is built without
TARGET_CFLAGS and may fail to link with applications using it, see e.g.
http://autobuild.buildroot.net/results/81a3bca5cbcf789c7ce1aa221a6a4154dd7c3917/
Instead of passing TARGET_ABI or TARGET_CFLAGS for libstdc++ in
--enable-cxx-flags parameter backport the patch that fixes propagation
of CXXFLAGS_FOR_TARGET to CXXFLAGS.
This issue is fixed in gcc-5.x
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: We cannot move to u-boot 2016.03 without changing the boot setup as
2016.03 broke legacy boot on omap4.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have modules (including usb/net) loaded automatically, we can
enable dhcp on eth0.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The omap2plus kernel defconfig builds most drivers as modules, so we need
(automatic) module loading to be able to use usb/display/..
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.39.1 (and all odd-numbered versions for y in x.y.z) are development
releases not intended for general usage, so roll back to the latest
stable version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove for the upcoming 2016.05 release, it's been deprecated for a year
now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's been deprecated for a year now so remove it.
[Peter: drop !samba dependency from samba4]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
samba(3) has been deprecated for quite some time so switch mplayer to
use samba4 if available.
It needs a little extra tweak to pick up the proper cflags since the odd
configure script doesn't do it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-2342 (AKA VU#270232): Quagga bgpd with BGP peers enabled for
VPNv4 contains a buffer overflow vulnerability.
Remove the --enable-babeld and --enable-opaque-lsa configure options that were
removed in this release.
See the release announcement at
https://lists.quagga.net/pipermail/quagga-dev/2016-March/014938.html.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d16b32a401 (package/rpi-firmware: add option to install vcdbg) added
a sub option to install the vcdbg tool, but the commit unfortunately
contained two errors:
- The package sets _INSTALL_TARGET = NO, so the _TARGET_CMDS are never used
- The install command used -d (handle arguments as directories) instead of
-D (create needed directories)
Fix these issues.
Cc: yann.morin.1998@free.fr
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
COPYING and LICENSE are identical, so no point including them both.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's all C++ code... C++11 even, but it turns out to compile fine even
with gcc-4.5 (Arago toolchain).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's not really a networking tool (if everything that does something on
the network would be called a networking tool, we wouldn't have much
else).
Since we don't really have an appropriate menu for it, put it in
Miscellaneous.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
arm_versatile kernel defconfig updated to deal with multi-platform ARM
support and driver changes.
mips(el) 32-bits is back in working order for 4.5
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.5 2.3.0 YES OK
arm_versatile 4.5 2.3.0 YES OK
arm_vexpress 4.5 2.3.0 YES OK
microblazebe 4.5 2.3.0 YES OK
microblazeel 4.5 2.3.0 YES OK
mips64el_malta 4.5 2.3.0 YES OK
mips64_malta 4.5 2.3.0 YES OK
mipsel_malta 4.5 2.3.0 YES OK
mips_malta 4.5 2.3.0 YES OK
ppc_g3beige 4.5 2.3.0 YES OK
ppc_mpc8544ds 4.5 2.3.0 YES OK
ppc_virtex_ml507 4.5 2.3.0 NO OK
ppc64_pseries 4.5 2.3.0 YES OK
sh4 4.5 2.3.0 YES OK
sh4eb 4.5 2.3.0 NO (1) OK
sparc_ss10 4.5 2.3.0 YES OK
sparc64_sun4u 4.5 2.3.0 YES OK
sparc_sun4u 4.5 2.3.0 YES OK
x86 4.5 2.3.0 YES OK
x86_64 4.5 2.3.0 YES OK
xtensa_lx60 4.4.5 2.3.0 YES (2) OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - xtensa ethernet broken in 4.5 so stick to 4.4.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They don't seem to be causing any issues after many bumps and tests.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in...
https://bugs.busybox.net/show_bug.cgi?id=8786
..., gdb fails to build with xz and expat support at the same time when
using an external toolchain.
This is how the problem is shown:
checking for liblzma... no
configure: error: missing liblzma for --with-lzma
And having a deeper look in gdb/config.log we can se a message like this
one:
/lib64/liblzma.so.5: undefined reference to `clock_gettime@GLIBC_2.17'
As Thomas said in the bug report quoted above, that error is related to
the fact that it find the host's lzma.
Adding --with-lzma-prefix=$(STAGING_DIR)/usr to GDB_CONF_OPTS fixes the
problem.
Credit-to: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The genimage configuration creates a vfat filesystem, so ensure we have
dosfstools / mtools built for the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream added a configure option to disable -Werror:
ddb31c58b8
Remove our patch therefore and use the new configure option instead.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package makefile attempted to append to KBD_INSTALL_TARGET_OPTS, but this
fails when done before evaluating $(autotools-package). This is because
autotools-package uses ?= to set default values. Instead of appending we now
override KBD_INSTALL_TARGET_OPTS.
Signed-off-by: Niels Skou Olsen <niels@tonebarker.dk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* add a post-image.sh script
* update defconfig for genimage
* update readme.txt
[Peter: also add host-dosfstools dependency for vfat partition]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent commit 5eb37d6adc broke the build
by default to binutils 2.25 for the target, while we only have hashes
for 2.25.1. Use 2.25.1 instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Taskwarrior is a task management suite of tools. Taskd is the
synchronization server for it.
Signed-off-by: Ben Boeckel <mathstuf@gmail.com>
[Thomas:
- use 'depends on' for BR2_USE_MMU, and add a comment indicating that
the dependency is due to the use of fork()
- use 'depends on' for BR2_USE_WCHAR, and add a comment indicating
that the dependency is due to gnutls and util-linux.
- add a hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the gcc musl patches for gcc 4.7, 4.8 and 4.9 so
that the path to the dynamic linker encoded as "program interpreter"
in the generated binaries actually matches the symbolic link installed
by musl when building for mips soft-float.
Indeed, musl installs a symlink called ld-musl-mipsel-sf.so.1, but gcc
currently generates binaries that use /lib/ld-musl-mips.so as program
interpreter.
The fix is simply the one from
https://bitbucket.org/GregorR/musl-cross/commits/825219202365, i.e
adjust MUSL_DYNAMIC_LINKER in our musl gcc patches.
Thanks to these patches:
$ ./host/usr/bin/mipsel-linux-readelf -a ./target/bin/busybox
[...]
[Requesting program interpreter: /lib/ld-musl-mipsel-sf.so.1]
[...]
gcc 5.x doesn't need any fix because the musl patches already use the
right value.
Fixes bug #7562.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 6709fad224, python-msgpack was
bumped to a new version that has support for Python 3. The "depends on
BR2_PACKAGE_PYTHON' was removed for the main python-msgpack Config.in
option, but not from the comment. This commit fixes this
inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It doesn't hurt, and is useful for removable boot media like a pendrive
that may depend on usb enumeration and isn't available immediately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It doesn't hurt, and is useful for removable boot media like a pendrive
that may depend on usb enumeration and isn't available immediately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As recently reported on the mailing list:
http://lists.busybox.net/pipermail/buildroot/2016-February/154130.html
Our configuration options to use sha-256 / sha-512 password encoding do not
work very well with uClibc-ng as our defconfig doesn't enable support for
these encodings, breaking E.G. password login with dropbear.
Notice that it doesn't break login with the busybox login applet, as we
currently force the use of the internal busybox password handling routines
when sha-256/512 encoding is used. This workaround can afaik now be removed.
To fix this, enable support for these password encodings in our defconfig.
Do it unconditionally and not based on BR2_TARGET_GENERIC_PASSWD_* so it
also works when a Buildroot toolchain is reused as an external toolchain and
as the support code is quite small (~8KB):
-rwxr-xr-x 1 peko peko 13360 Mar 7 22:56 output/target/lib/libcrypt-1.0.12.so
-rwxr-xr-x 1 peko peko 21552 Mar 7 23:47 output-sha/target/lib/libcrypt-1.0.12.so
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1285 - An error parsing input received by the rndc control
channel can cause an assertion failure in sexpr.c or alist.c
CVE-2016-1286 - A problem parsing resource record signatures for DNAME
resource records can lead to an assertion failure in resolver.c or db.c
CVE-2016-2088 - A response containing multiple DNS cookies causes
servers with cookie support enabled to exit with an assertion failure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream was super reactive, and already committed a patch to fix the
build on SuperH, so we take this upstream patch in Buildroot and
re-enable fio on SuperH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch 0001-compile-fix-for-linux-header-changes.patch is removed
as it was a backport from an upstream patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Despite the documentation and the comment in xtensa_move_literals, in
the presence of --text-section-literals and --auto-litpools literals are
moved from the separate literal sections into .init and .fini, because
the check in the xtensa_move_literals is incorrect.
This fixes build errors seen with projects that have .init/.fini and use
text-section-literals.
Backported from: 4111950f363221c4641dc2f33bea61cc94f34906
Reported-by: Waldemar Brodkorb <mail@waldemar-brodkorb.de>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016.72 - 9 March 2016
- Validate X11 forwarding input. Could allow bypass of authorized_keys command= restrictions,
found by github.com/tintinweb. Thanks to Damien Miller for a patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A recently discussed on the mailing list:
http://lists.busybox.net/pipermail/buildroot/2016-February/154189.html
Our mdev configuration currently doesn't handle module loading. Fix that by:
- Telling mdev to run modprobe on hotplug events providing MODALIAS
- Adjust the init script to handle coldplug modalias events (E.G. modules
for which the devices were already present before mdev was added as the
hotplug handler). mdev -s should arguable handle this, but it doesn't.
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default syslog parameters are to keep only 200-400 KiB of logs,
which is very few if there is a spammy daemon on the system, or a daemon
that fails and then spams errors that hides the original problem.
Make S01logging source a /etc/default/logging file where these
parameters can be overridden.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're not trying to be minimal here, and qemu can bridge/emulate certain
usb devices, so enable the different controllers and at least usb
storage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're not trying to be minimal here, and qemu can bridge/emulate certain
usb devices, so enable the different controllers and at least usb
storage.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use $(SED) instead of sed.
Kill trailing whitespace in comment, and move it above the define as per
standard look.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1950 - heap-based buffer overflow related to the parsing of
certain ASN.1 structures. An attacker could create a specially-crafted
certificate which, when parsed by NSS, would cause a crash or execution
of arbitrary code with the permissions of the user.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have removed gcc 4.5 support since a long time, so this commit
removes dead code that was only used when building a toolchain based
on gcc 4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-7560 - Authenticated client could cause Samba to overwrite ACLs
with incorrect owner/group.
CVE-2016-0771 - Malicious request can cause the Samba internal DNS
server to crash or unintentionally return uninitialized memory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We do source the glibc and uClibc packages in the toolchain menu,
because they do provide user-visible options. However, we do not so
far source the musl Config.in file
However, in 822be87 (toolchain: include C libraries in legal-info),
a Config.in file for musl was explicitly created, so that:
- legal-info would work (needed at the time, probably no longer needed
nowadays),
- the appropriate packages are enabled, like netbsd-queue or kernel
headers.
Yet, we do not source musl/Config.in, which means we do not get
netbsd-queue or kernel-headers to be selected:
$ make distclean; make menuconfig
Toolchain --->
C library ---> musl
save-and-exit
$ grep BR2_PACKAGE_LINUX_HEADERS .config
[nothing]
$ grep BR2_PACKAGE_NETBSD_QUEUE .config
[nothing]
Fix that by sourcing musl/Config.in at the same place we source glibc
and uClibc.
Normally, we do have a check in place that verifies that a package
that is not enabled is not a dependency of another package that is
enabled. However, musl is only a dependency of host-gcc-final, which
is a host package and has no corresponding BR2_PACKAGE_HOST_GCC_FINAL.
Thus host-gcc-final is not in the PACKAGES variable, and thus does not
trigger our check.
Reported-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we've got an mbedtls package in the tree we can enable the
optional support for it in libcurl.
We also remove the comment about polarssl support needing version
1.3.x. Indeed, polarssl was renamed to mbedtls when bought by ARM,
which was circa the 1.3.x polarssl release. Due to this referring to
polarssl 1.3.x doesn't make a lot of sense, and we'll probably never
package polarssl 1.3.x in Buildroot now that mbedtls replaces it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
[Thomas: slightly improve commit log as suggested by Luca, using
explanations from Gustavo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install package in staging directory, so that this package can be
linked together with other packages (for example collectd and its
onewire plugin).
Signed-off-by: Roland Franke <fli4l@franke-prem.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the bump to the 4.1.x series the bundled pgm library was dropped and
the --with-system-pgm option was made pointless since using unbundled
became the only option, so it was renamed to --with-pgm, which
previously meant "use bundled" (but not any longer).
However this wasn't accounted for and pgm support has been broken since
then.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes an issue where an Erlang program compiles fine against files
in staging, but fails to run on the target due to the unwanted packages
being removed.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gmrender-resurrect is UPnP (DLNA) renderer based on gstreamer.
Signed-off-by: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
[Thomas:
- Fix gstreamer related dependency comments to "gstreamer1 ->
libglib2", as suggested by Arnout.
- select BR2_PACKAGE_GST1_PLUGINS_BASE as a run-time dependency, as
suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 5e05faec7b4 (zsh: use the correct target pcre-config) set
ac_cv_prog_PCRECONF to the location of staging pcre-config. Unfortunately zsh
configure script does not actually use this variable when running pcre-config.
Complete the fix with a patch that makes use of ac_cv_prog_PCRECONF.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mxs-bootlets broke somewhere in between toolchain version bumps, leading to
boot failure.
Directly boot u-boot, as this is supported now, but it requires updated
partitioning (see readme.txt)
Drop mxs-bootlets patches, they aren't needed anymore.
Kernel is built as an uImage because the u-boot defconfig expects an
uImage on the second partition.
Tested on iMX233-OLinuXino-MINI hardware.
[Peter: adjust readme/config as suggested by Arnout]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A 'Libs.private' field needs to be present and properly defined in the
pkg-config file in order for static linking against SDL_mixer to work.
Besides adding the mentioned field, the included patch also modifies
configure.in so that EXTRA_LDFLAGS (which is now also used as the value
of 'Libs.private') no longer includes SDL_LIBS. This is done so as to
prevent libraries required by SDL from being listed twice when
'pkg-config --libs --static SDL_mixer' is run (they're already shown
because of the 'Requires: sdl' line in SDL_mixer.pc). Makefile.in is
adjusted accordingly as well.
Also enable autoreconf for this package since we're patching
configure.in.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Drop
0001-cmake-disable-shared-library-build-when-BUILD_SHARED.patch,
since CMakeLists has been reworked. Static/shared build can now be
configured via configuration options.
- Add support for optional libev and libuv.
- Use the github macro for download.
- Update hash.
Signed-off-by: Sagaert Johan <sagaert.johan@proximus.be>
[Thomas: tweak the commit log a bit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001-sched-workaround-glibc-_POSIX_PRIORITY_SCHEDULING-bu.patch is
removed because it was merged upstream. Since this patch is
removed, autoreconfiguring the package is no longer needed.
- the ncurses dependency is dropped because the ncurses-related
functionality from luaposix was removed, and moved to a separate
project.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: write a proper commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ifneq ($$($(2)_SITE_METHOD),override) test will always match
because SITE_METHOD is never set to "override". The result is that
some packages are downloaded and extracted unnecessarily, although
they are (correctly) not saved in output/legal-info/.
Fix by simply testing $(2)_OVERRIDE_SRCDIR instead: when empty, it
indicates that the packages is neither a "local" site-method package
nor a package that has its source directory overridden.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move to the latest release of linux-pam. This allows us to remove
a number of patches and consolidate the existing ones :
- 0001-configure.patch
- 0007-rhosts.patch
these two patches deal with the ruserok function, which is not
usable with uclibc. Consolidated into
0002-Conditionally-compile-per-ruserok-availability.patch.
- 0003-group.patch
- 0005-succeed.patch
- 0006-time.patch
these three patches deal with the innetgr function, which is not
usable with uclibc. Consolidated into
0003-Conditionally-compile-per-innetgr-availability.patch.
- 0004-mkdir.patch
Fixed in upstream, no longer required.
- 0002-doc-makefile-am.patch
renamed to 0001-doc-makefile-am.patch.
- 0008-fix-CVE-2014-2583.patch
- 0009-fix-CVE-2013-7041.patch
These patches are already included in the new release and so
can be safely deleted.
Signed-off-by: Brendan Heading <brendanheading@gmail.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the prebuilt musl toolchains provided by http://musl.codu.org/
had not been updated in a while, a new release based on musl 1.1.12
has been put online in December 2015. This commit updates our external
toolchain package to use this new pre-built toolchain.
Compared to the previous 1.1.6 toolchain, there are some changes:
- The MIPS big endian soft-float variant is no longer available.
- The Microblaze variant is no longer available.
- SuperH 4, both little and big endian, variants have been added.
- The components have been updated: gcc 5.3 is used, binutils 2.25.1,
and of course musl 1.1.12.
Besides the update itself, in this commit, we are:
- Making the musl toolchain non-selectable on MIPS big endian
soft-float.
- Making the musl toolchain actually work on MIPS little endian
soft-float, by downloading the right tarball and setting up the
right symbolic link.
- Removing support for the Microblaze variant, and adding support for
the SH4 variants.
All variants except armeb have been boot tested under Qemu, up to a
Busybox shell prompt. armeb has not been tested due to the lack of a
Qemu configuration for this architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All modules are always enabled when their dependencies are satisfied.
tcl doesn't work because the tclConfig.sh installed by our tcl package
is wrong: it adds -I/usr/include.
perl doesn't work out of the box, I didn't investigate.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When minizip was compiled before, vlc will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/vlc/plugins/access/libzip_plugin.so | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libc.so.1]
0x0000000000000001 (NEEDED) Shared library: [libdl.so.1]
0x0000000000000001 (NEEDED) Shared library: [libintl.so.8]
0x0000000000000001 (NEEDED) Shared library: [libminizip.so.1]
[...]
The build system offers no option to en-/disable minizip support,
the same is valid for zlib support:
https://git.videolan.org/?p=vlc.git;a=blob;f=configure.ac;h=be658816bcda642090e1cff20d93e61b25299250;hb=HEAD#l831
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When libcddb was compiled before, vlc will use it as optional
dependency:
$ output/host/usr/bin/x86_64-linux-readelf -a output/target/usr/lib/vlc/plugins/access/libcdda_plugin.so | grep NEEDED | sort
0x0000000000000001 (NEEDED) Shared library: [libcddb.so.2]
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#8736
When IPv6 and largefile options were removed from Buildroot, the code to
force these options in busybox were still left in.
There's no strong reason to forcefully enable these options (only to disable
options if the system cannot support it like we do for nommu), so instead
enable the options in our default defconfig, allowing people to override
this if they use a custom config.
While we're at it, enable the prefer-ipv4 option so network applets like
ntpd doesn't fail when dual stacked hosts are resolved from a system without
IPv6 support enabled in the kernel.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It didn't make sense to keep the U-Boot scripts and post build/image
scripts under the nitrogen6x folder since they apply for all our
platforms.
Also update the readme.txt to make it clearer which defconfig should
be used depending on the platform targeted.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-1531 - All installations having Exim set-uid root and using
'perl_startup' are vulnerable to a local privilege escalation. Any user
who can start an instance of Exim (and this is normally *any* user) can
gain root privileges. If you do not use 'perl_startup' you *should* be
safe.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-2037 - The cpio_safer_name_suffix function in util.c in cpio
2.11 allows remote attackers to cause a denial of service (out-of-bounds
write) via a crafted cpio file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also change SOURCE since the tarball got renamed with the bump.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As directed in the buildroot manual, "Optional hooks: keep hook
definition and assignment together in one if block". And also
to be consistent with the rest of avahi.mk.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl build patch is upstream so it's no longer necessary.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kodi itself already depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_7, there is
no need to duplicate this as reverse dependencies in sub options which
depend on Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi itself already depends on !BR2_STATIC_LIBS, there is no need to
duplicate this as reverse dependencies in sub options which depend on
Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The build stops with
configure: error: unsupported host (i586-buildroot-linux-musl)
due to musl not being supported in
https://github.com/xbmc/xbmc/blob/Isengard/m4/xbmc_arch.m4
Removing this obstacle will show that musl is really not being
supported, the build will fail:
In file included from emu_msvcrt.cpp:64:0:
emu_msvcrt.h:93:3: error: ‘__off64_t’ does not name a type
__off64_t dll_lseeki64(int fd, __off64_t lPos, int iWhence);
^
emu_msvcrt.h:94:3: error: ‘__off_t’ does not name a type
__off_t dll_lseek(int fd, __off_t lPos, int iWhence);
^
I know these problems are fixable and the voidlinux projects seems to
have done it already for 15.2-Isengard:
99f74705bc/srcpkgs/kodi/patches
For Jarvis-16.0 these patches have to be rebased at a later stage.
For now block the Kodi package with musl-based toolchains to avoid
build errors.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by Peter Korsgaard, using DESTDIR=$(HOST_DIR) and PREFIX=/usr
for the host installation is useless and actually incorrect (the
pkg-config file contains incorrect paths). Instead, using
PREFIX=$(HOST_DIR)/usr is simpler, and actually correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we opened up the next branch, a number of options have been
added to Config.in.legacy. However, they are located under the "legacy
options removed in 2016.02", which is not correct. This commit fixes
that by adding the "legacy options removed in 2016.05" header, and
restoring the one related to 2016.02 at the right location.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The option was a bit misleading since it only selected additional
libraries without --enable/disabling any features. Including all of them
here would add a lot of bloat so instead, it is replaced with notes
detailing which features each library enables.
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Thomas:
- slightly tweak Config.in help text, as suggested by Arnout.
- add Config.in.legacy handling for BR2_PACKAGE_SYSTEMD_ALL_EXTRAS,
as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd v228 requires lz4 >= 125
Signed-off-by: Gabe Evans <gabe@hashrabbit.co>
[Thomas: only pass PREFIX=/usr at install time instead of using
LZ4_MAKE_OPTS, and also pass it for the host installation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds LIRC_TOOLS_INSTALL_STAGING = YES to the lirc-tools
package to get the library headers into sysroot, which is needed to
develop lirc based applications.
Signed-off-by: Michael Schenk <michael.schenk@albistechnologies.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an option to the util-linux package that allows to
build the lsblk utility.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the latest kernel with DT path adjustment because Linux
commit ca5b34100c57 ("dts, arm64: Move dts files to vendor subdirs")
moved the DT file to the vendor sub-directory.
This commit was tested with the latest model (FVP v8 Foundation
Platform 9.5 build 41), so I updated the instruction in readme.txt
corresponding to it.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
VFPv3 and NEON was enabled and a readme.txt file was added.
Fixes bug #7580.
Tested on Pandaboard ES.
[Peter: use EABIhf]
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Google Code is being shut down. The google code site which hosts the
source .tar.gz references github/felipec, which has a gst-omapfb
repository with the same code as the tar.gz previously referenced.
Change the GST_OMAPFB_SITE to this github repo.
Signed-off-by: Alan Ott <alan@softiron.co.uk>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google Code is being shut down. The google code site which hosts the
source .tar.gz references github/felipec, which has a gst-dsp repository
with the same code as the tar.gz previously referenced.
Change the GST_DSP_SITE to this github repo.
Signed-off-by: Alan Ott <alan@softiron.co.uk>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google Code is being shut down. The google code site which hosts the
source .tar.gz references github/felipec, which has a dsp-tools repository
with the same code as the tar.gz previously referenced.
Change the DSP_TOOLS_SITE to this github repo.
Signed-off-by: Alan Ott <alan@softiron.co.uk>
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0001-add-cstdlib-header-to-ensure-EXIT_FAILURE-presence.patch since
it's already upstream.
Rebase shared/static build patches - these look unnecessary if we switch
to cmake-package, however it seems to require the zmq package switches
to cmake-package as well since static library naming looks different,
which might be a problem for users.
Also set the minimum required version of gcc to 4.7.x since the code now
requires c++1x.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iputils does not have to be built with openssl so remove selecting
BR2_PACKAGE_OPENSSL and make the dependency optional
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that all the boards have been converted to use genimage, the old
instructions on how to partition and write an SD card are useless.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-enable-internal-getproto-functions-for-musl.patch since it's
no longer required (tested via a flickcurl build with libnss against
mips-musl).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These defconfig options are set to their default values, so they are
redundant and can be removed without effect.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To allow a more complete "out-of-the-box" startup with the defconfig,
enable automatic network configuration of eth0 using DHCP.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're already using 4.9.x as default, and have 4.8.x on the lower side
together with 5.x (5.3.0) on the higher side.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0000-makefile-remove-host-headers-include.patch is upstream so remove it
and drop autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Glibc is currently configured without any "--enable-kernel" option.
This causes it to use the oldest possible kernel API, slowing it down
and preventing it from using any kernel features from later versions.
Since we are likely building a kernel and matching glibc together,
backwards compatability is probably unnecessary so this patch
unconditionally configures glibc with --enable-kernel set to
BR2_TOOLCHAIN_HEADERS_AT_LEAST.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: Stewart Smith <stewart@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This board is using a different kernel and u-boot branch than the
other Boundary Devices platforms since NXP forked the 3.14 kernel to add
i.MX7 support (see imx_3.14.38_6ul7d_beta branch).
Next kernel version, 3.14.52, will be the same for all i.MX platforms.
https://boundarydevices.com/product/nitrogen7/
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Follow the upstream EOL cycle and mark 4.3 as deprecated for 2016.05.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add hint to help text
- add assimp dependency
- always install the gltf (and any future) sceneparser to target.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: update commit message as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a _very_ small bootloader for STM32 platforms.
At submission afboot-stm32 supports the following boards:
stm32429i-eval
stm32746g-eval
stm32f429i-disco
stm32f469i-disco
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix commit title, add dependency on BR2_arm.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the two firefly_rk3288 defconfigs recently
added. First we switch to the ARM cortex-A17 core. Second,
we switch the kernel github access from SSH to HTTPS, which
is suitable for anonymous access.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the Cortex A17 variant. This core is considered a replacement
of the Cortex A12 and is supported by gcc 5 / binutils 2.25+
Suggested-by: Ross Green <greenfross@netscape.net>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
multicat is a simple and efficient multicast and transport stream manipulation
tool.
Signed-off-by: Julian Scheel <julian@jusst.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for gr-osmosdr - a GNU Radio block for interfacing with various
radio hardware.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[Thomas:
- instead of selecting BR2_PACKAGE_GNURADIO, use "depends
on". Indeed, it is fairly obvious for a user that some GNURadio
extensions require GNURadio to be built. And it avoids the need to
replicate all the complex dependencies of GNURadio.
- remove comment that the Python support needs Python. It's fairly
obvious, no?
- remove comment about the thread dependency of
BR2_PACKAGE_GR_OSMOSDR_RTLSDR, since anyway GNURadio already need
threads. Yes, we sometimes still add such dependencies, but in the
case of GNURadio, it's highly unlikely that GNURadio will ever
loose the thread dependency.
- use "NO" instead of "no" as the value for
GR_OSMOSDR_SUPPORTS_IN_SOURCE_BUILD since we always use upper-case
letters for the value of such booleans.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a kludge switching the explicit invocation of the ip binary
from /bin to /sbin since that's where buildroot installs it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bind source tar-ball is now embedded into the dhcp source. The embedded
bind tar-ball is extracted after the dhcp source so cross compiling
patches can be applied to the dhcp and bind before the package is built.
The embedded bind configure is called as part of dhcp make instead of
dhcp configure; therefore, needed configure parameters are set in the
make env.
0001-dhcp-cross-compile.patch and 0002-bind-cross-compile.patch have
been submitted upstream as part of a cross compiling enhancement
suggestion to dhcp-suggest@isc.org. Reference ISC-Bugs #41502.
0003-bind-hos-cc.patch is already scheduled for the next dhcp release.
Buildroot thread
http://lists.busybox.net/pipermail/buildroot/2016-January/149079.html
has related information.
Signed-off-by: Doug Kehn <rdkehn@yahoo.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
* vpu:
- Completely rewritten plugin code; elements now based on libimxvpuapi
instead of libfslvpuwrap
- imxvpuenc_h264 inserts SPS/PPS data in front of I/IDR frames
- imxvpuenc_mjpeg's quality factor actually has an effect, and is
equivalent to the libjpeg's quality factor (it is used in exactly
the same way to scale the quantization matrix' coefficients)
- the encoder's output buffers no longer have to use DMA memory; they
use regular system memory instead
- new support in imxvpudec (referred to as "chroma interleaving") for
NV12, NV16, NV24 as output formats as an alternative to the I420,
Y42B, Y444 formats
- removed all of the system frame number tracking code, since it is
unnecessary; Instead, the libimxvpuapi's context fields are used to
associate input/output frames with GstVideoCodecFrame system frame
numbers
- fix memory leaks related to missing buffer pool unref'ing
* imxv4l2videosrc:
- support for crop metadata
- element uses the width, height, etc. of the format that the device
actually uses during operation (instead of default values)
- autofocus control support via GstPhotography
- fix incorrect GLib warnings
- fix segmentation fault when shutting down the element
* eglvivsink:
- remove extra g_free() calls, which lead to runtime errors
- remove GLESv2 VIVANTE link dependencies
- add Android platform
- manually retrieve VIV direct texture functions
with this and the link dependency elimination, this means that for
platforms except the framebuffer one, no Vivante specific headers
and libraries are needed anymore
- fix blocking issue in the Wayland platform mainloop
* improved and expanded documentation
* pxp: NV16 *is* supported after all (it was actually a bug in GStreamer
pre-1.5.91)
NOTE: this does not break compatibility with GStreamer versions older
than 1.5.91
* compositor: Update backported aggregator code to GStreamer 1.6
* blitter:
- error handling improvements
- add missing buffer pool unref'ing, which lead to memory leaks
- add missing compositor dependency to blitter base
* uniaudio:
- only build the uniaudio plugin if at least one codec was found
during configuration
- disable plugin if the gstaudio library is not available
- add AAC profile field to the sink caps with GStreamer >= 1.4.4 to
ensure the uniaudio decoder is only used for AAC-LC data
* ipu: increase fill frame width from 8 to 64 pixels to make IPU fill
operations work with pre-3.14 Freescale kernels
* g2d: use padding pixels when setting surface parameters, fixing G2D
failures with frame sizes that aren't aligned
* wscript:
- improve Android support
- fix installation paths for the common, blitter, compositor libraries
This is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/cf7a088
However this package now offers a more flexible approach because it can
be built without the GPU or VPU elements for devices based on SoCs that
lack those features like the new i.MX7.
Tested with the following commands on i.MX6Q (IPU):
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxeglvivsink
Tested with the following commands on i.MX6SX (PXP):
# gst-launch-1.0 imxv4l2videosrc device=/dev/video1 ! imxpxpvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Tested-by: Peter Seiderer <ps.report at gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a library for using the i.MX6 VPU. It is an alternative to
libfslvpuwrap, hosted on Github, and has an API that features several
improvements over libfslvpuwrap, which include:
* User-defined context information associated with input frames, which
is passed on to corresponding output frames (to be able to identify
which input frame produced which output frame)
* Groundwork for future DMA-BUF/BMM/ION/CMA allocator integration, using
file descriptors instead of physical addresses
* Indicators for when it is safe to try to decode frames, which is
critical in multi-threaded playback cases
* Simplified, higher-level JPEG en/decoding API, based on the VPU MJPEG
codec; useful for picture viewing without the extra boilerplate for
VPU-based en/decoding
Changelog 0.10.0 -> 0.10.1:
- add debian packaging files
- update waf to version 1.8.16
- add workaround in wscript to prevent stale pkg-config .pc files
- fix memory leak by adding missing IOFreeVirtMem() call in vpulib
backend
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-fsl-arm/commit/e519d6chttps://github.com/Freescale/meta-fsl-arm/commit/1dd6a5b
This package has been implicitely tested through gstreamer as the
plugins rely on it for vpu decoding:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update libaio from 0.3.108 to 0.3.110. This adds AArch64 support.
The 0001-arches.patch is simplified to only add MIPS definitions: the
SPARC support has been merged upstream, and we don't need the m68k and
parisc support.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas:
- respect alphabetic ordering in the definition of
BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS
- add more details in the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: add missing dependency of host-gutenprint on host-pkgconf,
needed since configure.ac uses PKG_CHECK_MODULES and the package is
autoreconfigured.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- add dependency on erlang-p1-utils, as noticed by Romain Naour.
- the license is now Apache-2.0 and no longer GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license of erlang-p1-tls is indeed GPLv2+ as indicated in
ERLANG_P1_TLS_LICENSE, but this GPLv2+ carries an OpenSSL exception,
which allows it to be linked against the OpenSSL library. Therefore,
we update the license information accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- do only the version bump, not the package rename, as suggested by
Romain Naour
- erlang-p1-stun continues to depend on erlang-p1-tls, not
erlang-fast_tls.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version includes C++ code, so also add dependency on a C++
compiler.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas:
- propagate new C++ dependency to ejabberd, as noticed by
Romain Naour
- fix license information and license files. Not all the code is
under the TCL license, in fact most of the code is under the
Apache-2.0 license, and some additional license files have been
added to clarify this.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously only the C compiler path and options were passed to rebar.
Erlang projects that used the C++ compiler would fail to build, which
would for example be the case with the latest version of
erlang-p1-stringprep. This fixes those errors.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: adjust commit message to indicate an example of an Erlang
package that needs the C++ compiler.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a major release of Erlang that includes a licensing change from
the EPL to the Apache License, significant changes to the timer APIs, better
support for large maps, and security improvements.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-crossbar package was not added at the right location, so
this commit fixes the alphabetic ordering.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- Remove dependency on having .py files, since building/testing with
.pyc files only was successful.
- Remove the "# runtime" comment for all dependencies, and only
mention it once before all "select".
- Add missing dependencies on: BR2_PACKAGE_PYTHON_PYCPARSER and
BR2_PACKAGE_PYTHON_LMDB.
- Use AGPLv3 for the license instead of AGPL3.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: remove dependency on having .py files, since it builds fine
and imports fine with .pyc files only.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- remove python-six from the build dependencies, it is only a runtime
dependency
- add host-python-cffi in the build dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix musl build by removing inclusion of sys/cdefs.h.
Patch was backported from upstream master and can be dropped in the
next version bump.
Update homepage link
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds basic configuration files for the Firefly RK3288 board.
Both minimal and demo defconfigs are added. The latter enables Qt5 with
the required Mali T76X GPU user space components.
More info about the board:
http://en.t-firefly.com/en/firenow/firefly_rk3288/specifications/
[Peter: use same-as-kernel for kernel headers]
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package provides the binary user-space components for the ARM Mali
Midgard T76X GPU.
Note that this package requires a kernel with the ARM Mali Midgard GPU
Kernel Drivers enabled.
Signed-off-by: Ariel D'Alessandro <ariel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also:
* switch download site to github as the previous download page is not
maintained anymore
* drop 0004-no-gtk-deprecations.patch as it is applied upstream
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license information: it is either Apache-2.0 *or* BSD-3c
- add the LICENSE file to the list of license files, since it is the
one that explains that the license is either Apache-2.0 or BSD-3c.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- switch to Github, which has a LICENSE file. The issue was reported
upstream: https://github.com/dw/py-lmdb/issues/108. Then added the
<pkg>_LICENSE_FILES variable.
- bump version to 0.89 (instead of 0.88)
- indicate the proper license, following the SPDX code for the
OpenLDAP 2.8 license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
upmpdcli version 1.1.0 requires libupnpp version 0.14.1.
Also adjust the installation of the config file. It is renamed to upmpdcli.conf-dist
in the sources, but we install it as upmpdcli.conf as usual.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-math-link.patch as some added code render it useless.
Rework 0002-cmake-disable-shared-library-build-when-BUILD_SHARED.patch
because it did not apply anymore.
This patch is already in a PR upstream.
Add 0001-cmake-uClibc-Fix-missing-libm-for-tests.patch, to fix a build
error with uClibc toolchain.
This has been sent upstream:
https://github.com/lloyd/yajl/pull/184
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for building NVME utility - a utility for interacting with
standard NVM Express (optimized PCI Express SSD interface) devices.
Signed-off-by: Mamatha Inamdar <mamatha4@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MT7601u is a MediaTek Wifi 802.11n dongle
(New chipset from the combined ralink/mediaTek company)
Signed-off-by: Matt Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0003-Problem-return-code-of-sodium_init-is-not-checked.patch since
it's in this release.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which also means moving from unstable->stable (odd numbers in gnome
project packages are development).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which also means moving from unstable->stable (odd numbers in gnome
project packages are development).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which also means moving from unstable->stable (odd numbers on gnome
project packages are development).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2016-02-10 18:07:34 +01:00
3631 changed files with 58627 additions and 25646 deletions
if test "${mesontimer}"="0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}"="1"; then fdt rm /timer; fi
if test "${nographics}"="1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
if test "${nographics}"="1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
if test "${nographics}"="1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}"="1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
The system starts two consoles: one on the serial port
and one on HDMI.
4. Enjoy
3. Enjoy
Additional information about this board can be found at
http://www.minnowboard.org/.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
