Commit e482ebf51d attempted to fix the
installation of qt5quickcontrols by only installing the PrivateWidgets
directory for the 5.8.0 version.
However, the availability of PrivateWidgets has nothing to do with the
version; in both 5.6.2 and 5.8.0, the installation is gated by the
following statement in src/src.pro:
qtHaveModule(quick):qtHaveModule(widgets): SUBDIRS += widgets
i.e. it is installed when both the Quick and the Widgets module are
available. The Widgets module is controlled by Buildroot's
BR2_PACKAGE_QT5BASE_WIDGETS symbol, the Quick module is controlled by
Buildroot's BR2_PACKAGE_QT5DECLARATIVE_QUICK. The qt5quickcontrols
package selects BR2_PACKAGE_QT5DECLARATIVE_QUICK so it is not really
needed to include it in the condition. However, it is theoretically
possible to build this package without QtQuick. Also, adding this
condition makes it consistent with src.pro.
Note that commit e482ebf51d introduces a
second fix (not mentioned in the commit message): for version 5.6.2, the
Layouts directory is installed, but in 5.8.0 this directory doesn't
exist any more. Therefore, a separate condition on the version is still
needed.
Fixes:
http://autobuild.buildroot.net/results/1ff3e9ad4ba518d0a37f9fc12038bf9020f28094
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a75ab1fc1d ("package/classpath:
Don't depend on jamvm"), we removed the dependency of classpath on
jamvm. Since jamvm is only available for a reduced set of architectures,
classpath could until this commit until be built on those architectures.
However, now that this dependency has been removed, classpath can
potentially be built for all architectures supported by Buildroot, even
though it doesn't support all of them.
Since adding support for additional architectures in classpath doesn't
make much sense, because classpath is in Buildroot only usable with
JamVM anyway, and JamVM is only available for a small set of
architectures, this commit simply makes classpath available on the
architectures that it supports.
By doing so, it also removes the or1k support patch which was added by
commit f12a146f81, since anyway or1k is
not supported by JamVM.
Fixes:
http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/
(classpath on microblaze)
http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/
(classpath on nios2)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On PowerPC64(le), we patch all configure scripts. Due to this, the
version.texi in OpenOCD files gets regenerated, and then since it has
a newer date than openocd.info, openocd build system rebuilds the
documentation. Unfortunately, this documentation rebuild fails on old
machines.
We work around this by faking the date of the generated version.texi
file, to make the build system believe the documentation doesn't need
to be regenerated.
Fixes:
http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 68cebedeb9 ("assimp: work around
gcc bug on SuperH"), a work around was added to make the package build
with gcc on SuperH. The condition included a test on the gcc version,
which was mistakenly done on the host gcc version, while a test on the
target gcc version was intended.
Thanks to Peter Korsgaard for spotting the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc versions earlier than gcc 6.x fail to build assimp on SuperH when
static linking:
AssxmlExporter.cpp:623:1: error: unable to find a register to spill in class 'GENERAL_REGS'
It's the combination of -Os and *not* having -fPIC that makes gcc
fail, which explains why configurations with dynamic linking work
fine.
-Os -fPIC -> works
-Os -> fails
-O2 -fPIC -> works
-O2 -> works
Therefore, as a workaround, we are forcing the use of -O2 on SuperH
when the gcc version is older than gcc 6.x and we're statically
linking.
Fixes:
http://autobuild.buildroot.net/results/ec88aa8118179e30e24603cc45292047dca19216/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX has been removed in commit
311bc137da ("toolchain: kill ADI
Blackfin toolchain"), so this "depends on" is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libuv library uses __sync atomic built-ins:
$ readelf -a -W output/target/usr/lib/libuv.so.1.0.0 | grep __sync
122: 00000000 0 NOTYPE GLOBAL DEFAULT UND __sync_val_compare_and_swap_4
but this is not currently taken into account in the libuv package,
causing some build failures in packages using libuv as an optional
dependency, such as janus-gateway and mosquitto.
Therefore, this commit updates the libuv package with this additional
dependency. The reverse dependencies of libuv are also updated: luv, luvi
and moarvm.
Fixes:
- http://autobuild.buildroot.net/results/bdaa67d763c0d8d377a04529c74f73bee7d4ccef/
(janus-gateway)
- http://autobuild.buildroot.net/results/2bc84ba2d1167018e2d48e5183ead22b6425dcf5/
(mosquitto)
[Peter: drop cmake changes after cmake revert]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
htop wants to use backtrace() support from the C
library. Unfortunately, with old uClibc versions such as the one we
use for the ARC architecture, the backtrace() implementation is in
libubacktrace. In addition, this implementation needs dladdr()
support, which is in libdl, not available when static linking.
Since this problem no longer exists in more recent versions of uClibc,
we simply special case the ARC+static linking case, and make the
configure script believe that <execinfo.h> is not available.
Fixes:
http://autobuild.buildroot.net/results/cdea351fad7a0f61ddec3e6a141da8da0523a902/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot manual documents that <pkg>_CONF_ENV is passed in the
environment when calling cmake during the configure step. However, the
actual implementation in pkg-cmake passes HOST_<pkg>_CONF_ENV when
configuring the host variant of a cmake package, but does not pass
<pkg>_CONF_ENV when configuring the target variant of a cmake package.
This commit fixes that by passing <pkg>_CONF_ENV in the environment as
expected. It should not cause any behavior change, because this
feature is in fact not used by any package in upstream Buildroot:
$ grep CONF_ENV $(git grep -l cmake-package package/)
package/pkg-cmake.mk:$(2)_CONF_ENV ?=
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
This issue was reported by Olivier <ovalentin@awox.com> as bug #9616.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Remove distribution upgrade cause it slows down the first boot and
presents a bug when executed non interactively.
* Reorganize provision scripts to be in privileged and non privileged
sections
* Add Ubuntu mirror automatic handling for apt packages sources
Fixes bug #9581
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses sub-options BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}
are currently very badly broken: they only control whether the
libform, libmenu and libpanel libraries are installed in
$(TARGET_DIR), but do absolutely nothing about their installation in
$(STAGING_DIR).
This means that when one of those options is disabled, the
corresponding library is indeed not installed in the target, but is
available in staging. It can therefore be detected by the configure
script of another package and used... even though the library will not
be in the target, causing a runtime failure.
Internally, ncurses.mk uses the "make install" logic of ncurses for
the staging installation, but uses a completely hand-written logic for
the target installation, which is the reason for this
desynchronization between what's installed in staging and target.
When BR2_PACKAGE_NCURSES_WCHAR=y, this also causes some build
failures. Indeed, when BR2_PACKAGE_NCURSES_WCHAR=y, Buildroot creates
some symbolic links lib<foo>.so -> lib<foo>w.so in staging and target,
but only for the lib<foo> that have been enabled by
BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}. Due to this, a package
that for example needed the libmenu library but forgot to select
BR2_PACKAGE_NCURSES_TARGET_MENU was:
- Building fine with BR2_PACKAGE_NCURSES_WCHAR disabled (because
libmenu.so exists in staging), but would fail to run at runtime
because libmenu.so is not in the target.
- Fail to build with BR2_PACKAGE_NCURSES_WCHAR=y because only
libmenuw.so exists, and not the libmenu.so symbolic link.
Since those libraries are small (43K for libform, 21K for libmenu and
8.2K for libpanel), this commit takes the very simple approach of
removing those options, and installing the libraries
unconditionally. It therefore uses the "make install" logic for both
the staging *and* target installation.
In detail, this commit:
- Removes the NCURSES_PROGS variable, not needed since
--without-progs already allows to disable the build and
installation of programs.
- Removes the NCURSES_LIBS-y variable, and replaces it with a single
unconditional assignement to NCURSES_LIBS, only used to create the
lib<foo>w.so -> lib<foo>.so symbolic links when wchar support is
enabled.
- Removes NCURSES_INSTALL_TARGET_CMDS and the functions it was
calling: NCURSES_INSTALL_TARGET_LIBS and
NCURSES_INSTALL_TARGET_PROGS.
- Adds a NCURSES_TARGET_SYMLINK_RESET hook to create the reset ->
tset symbolic link, as was done before.
- Adds a NCURSES_TARGET_CLEANUP_TERMINFO to cleanup the terminfo
files in the target, so that we stay in the same situation in terms
of installed terminfo files.
- Removes the BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL} options
from the Config.in files: both their definition and usage.
- Simplifies all the symlink dance for lib<foo> -> lib<foo>w, because
as Yann E. Morin suggested, this dance is only needed in staging, not
in the target. Once binaries have been built, they refer to the
SONAME of the library, which is the lib<foo>w variant (for shared
linking). For static linking and .pc files, it's obvious that we
don't care about them on the target. Therefore the
NCURSES_LINK_LIBS_STATIC, NCURSES_LINK_LIBS_SHARED and
NCURSES_LINK_PC functions no longer take any argument: they always
apply to STAGING_DIR only. NCURSES_LINK_TARGET_LIBS is removed.
It is worth mentioning that adding Config.in.legacy support is *NOT*
necessary. Indeed:
- If they were disabled before this patch, having them in
Config.in.legacy would not trigger the legacy warning.
- If they were enabled before this patch, then the behavior is
unchanged: all libraries are now unconditionally installed. So
there is no point in warning the user.
We double-checked the installed size of a filesystem containing just
ncurses before and after this patch, and the only folder that has its
size changed is /usr/lib, growing from 852 KB to 932 KB in the wchar
enabled case. That's a 80 KB system size increase.
This commit fixes the sngrep build failure and potentially numerous
runtime issues with ncurses.
Fixes:
http://autobuild.buildroot.net/results/7b5db21a6c568e6c6c8fe2b5d5a2f5ca24df510c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there's not much point in generating missing host keys when the
init script is called with "stop", the call to ssh-keygen should not
be done inconditionally, but in the start function instead.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit a5015f1025 ("util-linux: security
bump to version 2.29.2") incorrectly removed <pkg>_AUTORECONF = YES.
While the patches touching configure.ac have indeed been removed, there
is still a patch touching a Makemodule.am file, which triggers an
autoreconf a build time, which itself fails because autoconf/automake
are not available.
So re-add <pkg>_AUTORECONF, with a comment pointing specifically at the
patch that makes it necessary.
Fixes:
http://autobuild.buildroot.net/results/309127a532eed00e406bbaf0b1a51b7241a10505/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the host build of Python 2 defaults to narrow unicode (UCS2),
ignoring the BR2_PACKAGE_PYTHON_UCS4 configuration option which may be
set to wide (UCS4).
This results in host and target Python packages which are incompatible
in subtle ways.
For example, installing wheels into the target fails when they are made
with the host python, citing incompatibility (as can be seen by the
package tags which may be "cp27u-manylinux1" instead of
"cp27mu-manylinux1").
Compiling the host Python 2 with the same UCS configuration as the
target ensures that the packages are compatible (and the tags match).
This does not affect Python 3 as support for narrow unicode was
deprecated in version 3.3, see https://www.python.org/dev/peps/pep-0393/
Thanks to Tony Breeds <tony@bakeyournoodle.com> for reporting this.
Signed-off-by: Chris Smart <mail@csmart.io>
[Thomas: add comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-5847 - The gst_asf_demux_process_ext_content_desc function in
gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote
attackers to cause a denial of service (out-of-bounds heap read) via vectors
involving extended content descriptors.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-5848 - The gst_ps_demux_parse_psm function in
gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows
remote attackers to cause a denial of service (invalid memory read and
crash) via vectors involving PSM parsing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It turned out that the troll character U+c2a0 was added by our own
patch.
So fix it amd drop our second patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to btrfs-progs that fixes the build of
docker-engine, and possibly other packages including kerncompat.h from
btrfs-progs.
For the btrfs-progs build itself, a --disable-backtrace option allows to
indicate whether backtrace()/<execinfo.h> support should be used or
not. However, once btrfs-progs is installed, it simply looks at whether
__GLIBC__ is defined or not to decide to use backtrace() or not.
However, uClibc defines __GLIBC__ but does not provide backtrace()
functionality. The additional patch tweaks the kerncompat.h to look at
__UCLIBC__ and not use backtrace() functionality in this case.
Fixes:
http://autobuild.buildroot.net/results/9dc9370a79c5c44e6c92be6a44334842c211d923/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
Makefile:532: *** mbedtls is in the dependency chain of bctoolbox that
has added it to its _DEPENDENCIES variable without selecting it or
depending on it from Config.in. Stop.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the comment about the ARC exception to match the one used in VLC,
so that a 'git grep "ARC toolchain issue"' returns the list of packages
to re-evaluate on ARC when the ARC toolchain gets upgraded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because with libimxvpuapi older than 0.10.3, the gst1-imx-0.12.3 "imxvpu"
plugin will not build.
Changelog:
* properly pass on color format in simplified JPEG encoder interface
* add alternative write-callback-style encoding mode
also add encode example variant which uses write-callback style output
* add support for "fake grayscale mode" in encoders
this is done by using I420 internally and filling the U and V planes
with 0x80 bytes
* make sure JPEG quantization table is copied in standardized zig zag order
the VPU does not, so this has to be done explicitely
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-2629 - curl SSL_VERIFYSTATUS ignored
>From the advisory (http://www.openwall.com/lists/oss-security/2017/02/21/6):
Curl and libcurl support "OCSP stapling", also known as the TLS Certificate
Status Request extension (using the `CURLOPT_SSL_VERIFYSTATUS` option). When
telling curl to use this feature, it uses that TLS extension to ask for a
fresh proof of the server's certificate's validity. If the server doesn't
support the extension, or fails to provide said proof, curl is expected to
return an error.
Due to a coding mistake, the code that checks for a test success or failure,
ends up always thinking there's valid proof, even when there is none or if the
server doesn't support the TLS extension in question. Contrary to how it used
to function and contrary to how this feature is documented to work.
This could lead to users not detecting when a server's certificate goes
invalid or otherwise be mislead that the server is in a better shape than it
is in reality.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From https://www.kernel.org/pub/linux/utils/util-linux/v2.29/v2.29.2-ReleaseNotes
This release fixes su(1) security issue CVE-2017-2616:
It is possible for any local user to send SIGKILL to other processes with root
privileges. To exploit this, the user must be able to perform su with a
successful login. SIGKILL can only be sent to processes which were executed
after the su process. It is not possible to send SIGKILL to processes which
were already running.
Drop upstream patches and autoreconf since it's no longer required.
[Peter: extend commit message with CVE info / description]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit limits results from the javascript query for selecting
messages from the mailing list. It was not limited before.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#9666 [1]
cp -dpfr .../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets .../target/usr/qml/QtQuick
cp: cannot stat ‘.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets’: No such file or directory
[1] https://bugs.busybox.net/show_bug.cgi?id=9666
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 76838f6341.
The commit referenced above explicitly states that the function was
copied as-is from the gcc source code at the time. And indeed that is
exactly how the function appeared in gcc in commit
e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934.
However, our toolchain wrapper is "GPLv2 only", while the file this function
was copied from is "GPLv3 or later". As such we can't include that function
and still comply to both licenses.
Furthermore, the code is far from optimum.
Since this feature is not release-critical, revert it until we re-implement
it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently we force selection on mbedtls for bctoolbox. If, for whatever
reason, mbedTLS is not found, bctoolbox searches for PolarSSL and, if
not present, fails with:
```
Could NOT find PolarSSL (missing: POLARSSL_INCLUDE_DIRS
HAVE_POLARSSL_SSL_H)
```
This happens because bctoolbox enables support for mbedTLS and PolarSSL
by default, whereas, if both are enabled, mbedTLS is preferred over
PolarSSL.
However, crypto support is not mandatory and support for both libraries
can be turned off. Therefore, optionally depend on mbedTLS or PolarSSL
and enable/disable the library support explicitly.
This fixes the issue of searching for PolarSSL altough the dependency is
not declared in the bctoolbox package.
Note, that this does not fix the issue why mbedtls is not found although
it is enabled. This issue is address in this thread [1].
Fixes:
http://autobuild.buildroot.net/results/cfe/cfeb2f542598e5d450b332fb51a6d79bae24158c/
.. and more.
[1] http://lists.busybox.net/pipermail/buildroot/2017-February/183055.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5c4d3560b9.
Although the patch fixes the build error it does not set the flags for
Libs.private properly. A follow-up patch will provide a better solution
for this issue.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make license type lists more uniform:
* put content license applies to in parenthesis; ex: "GPLv2+ (programs)"
* use commas to separate types listed without conjuction; ex: "GPLv2, LGPLv2"
No attempt was made to validate the claimed licenses. This is just a tweak
to increase uniformity of the _LICENSE variables.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: replace semi-colons by commas in LIBURCU_LICENSE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select (and use) builroot provided freetype in case qt5base gui is
selected (gui without freetype/font support makes not much sense
and gives compile errors).
Qt 5.6 needs some support to find the include headers, 5.8 is
clever enough inherently.
Fixes [1] (by avoiding the build-in freetype library which depends
on activated libpng support):
Project ERROR: Library 'libpng' is not defined.
make[3]: *** [sub-3rdparty-freetype-make_first] Error 3
[1] http://autobuild.buildroot.net/results/219162ba616289f799a5053c4dcc6b8574284283
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch 0006-fix-client-gfx_state-initialisation.patch
add the initialisation for the variable gfx-state.
This patch was provided by the community and it is already
integrated in OpenEmbedded.
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/197/197ab8a12bf1d780a986e5d447d1e0f5ee070405/
qt5.8 no longer supports ARMv4. From src/corelib/global/qprocessordetection.h:
if Q_PROCESSOR_ARM >= 6
define Q_PROCESSOR_ARM_V6
endif
if Q_PROCESSOR_ARM >= 5
define Q_PROCESSOR_ARM_V5
else
error "ARM architecture too old"
[Peter: also hide comment as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly set the ERL_TOP environment variable to override values set
on a user's system. This prevents Erlang's configure scripts from
using source files outside of the ones that Buildroot downloaded.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The initial fix for this issue, re-including stdbool.h, is not
working.
Instead, fix using the method used for other packages with a similar
problem: add -std=gnu99, which prevents bool from being redefined and
removes the need for any source code change.
Fixes: 64904f0f6d
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julian only ever sent one patch to freerdp, the one adding it, in 2012.
I'm somewhat interested in this package, so I'll adopt it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gstreamer has moved to build time unaligned access support detection using
ifdefs in gstconfig.h since 1.9.2:
commit 6ef601367e0f5adb7a8b02cec94dec04fccf701a
Author: Nirbheek Chauhan <nirbheek@centricular.com>
Date: Tue Jun 21 18:59:49 2016 +0530
gstconfig.h: Detect unaligned access support at compile-time
This makes gstconfig.h completely arch-independent. Should cover all
compilers that gstreamer is known to build on, and all architectures
that I could find information on. People are encouraged to file bugs if
their platform/arch is missing.
So ac_cv_unaligned_access is no longer used and our logic can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From http://www.openwall.com/lists/oss-security/2017/02/16/4
The latest dbus release 1.10.16 fixes two symlink attacks in
non-production-suitable configurations. I am treating these as bugs
rather than practical vulnerabilities, and very much hope neither of
these is going to affect any real users, but I'm reporting them to
oss-security in case there's an attack vector that I've missed.
No CVEs assigned so far.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to glibc 2.18, definitions like SIZE_MAX or INT_FAST32_MAX from
<stdint.h> were only made available for C code, or in C++ if
__STDC_LIMIT_MACROS was defined.
The code from jasper uses such definitions, without defining
__STDC_LIMIT_MACROS. Unfortunately, defining __STDC_LIMIT_MACROS in
the jasper headers doesn't work, since <stdint.h> has already been
included before, at a point where __STDC_LIMIT_MACROS was not defined.
So to solve this problem, we simply pass -D__STDC_LIMIT_MACROS in
CXXFLAGS when building libraw with jasper support.
Fixes:
http://autobuild.buildroot.net/results/908aef6c82d56060933713df217b6b2ba21a01b0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The generic code now knows how to extract .tar.lz archives. Remove the local
extract code.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit teaches the generic package handling code how to extract .tar.lz
archives. When lzip is not installed on the host, host-lzip gets built
automatically.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't special case $(XZCAT) when constructing DL_TOOLS_DEPENDENCIES. The next
commit will introduce another extractor that automatically builds when not
installed. Introduce EXTRACTOR_DEPENDENCY_PRECHECKED_EXTENSIONS that lists
archive extensions for which the extractor is already checked in
support/dependencies/check-host-foo.mk. Use this in the newly introduced
extractor-dependency to populate DL_TOOLS_DEPENDENCIES.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: add missing space after "firstword", as noticed by Thomas DS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MPD version 0.20 being affected by GCC PR libstdc++/64735 means no mpd package
available in Buildroot for the architectures NIOSII, ARMv4, ARMv5 and SPARCv8
until GCC 7 is released.
As the next Buildroot release is in 2017.02, which is before GCC 7 is expected
to be finished we add hidden config symbols to select the version branch to use.
Note, that we bumped the version from 0.19 to 0.20 quite recently within the
current Buildroot release cycle. This way we can keep the support for mpd on
the affected architectures, like ARMv5, until GCC 7 is out.
Note, that for the version 0.19 MPD requires libglib2.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Release 0.1.2 claimed to fix an issue with requesting both types of
line events, but actually didn't. This time it's really fixed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cups configure script checks for a pkg-config program. If host-pkgconf
has not been built prior to cups, it uses the system pkg-config, which
might potentially lead to bogus results:
checking for i586-buildroot-linux-musl-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
With this patch applied:
checking for i586-buildroot-linux-musl-pkg-config... no
checking for pkg-config... /home/thomas/projets/buildroot/output/host/usr/bin/pkg-config
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cbootimage uses non-standard u_intXX_t types instead of the C99 types
uintXX_t types, which prevents it from building with the musl C library.
A patch to fix this has been submitted upstream, but since there are
many many occurences of such types, the patch is a bit large to carry in
Buildroot, especially compared to the fact that having this package
building against musl is probably not a top priority.
So for now, simply disable this package on musl, until upstream fixes
the issue and releases a new version.
Fixes:
http://autobuild.buildroot.net/results/61bdfb7e0ff9628190d9eb86e40c4c90e768b8e2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When GCC_COLORS is set, ccache passes '-fdiagnostics-color' to GCC but
this flag requires GCC v4.9 or later. Older versions complain about the
unrecognized command line option.
Using GCC_COLORS in the context of Buildroot is seldom useful, so we
just unexport GCC_COLORS altogether.
Reported-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jann Horn, Project Zero (Google) discovered that ntfs-3g, a read-write
NTFS driver for FUSE does not not scrub the environment before
executing modprobe to load the fuse module. This influence the behavior
of modprobe (MODPROBE_OPTIONS environment variable, --config and
--dirname options) potentially allowing for local root privilege
escalation if ntfs-3g is installed setuid.
Notice that Buildroot does NOT install netfs-3g setuid root, but custom
permission tables might be used, causing it to vulnerable to the above.
ntfs-3g does not seem to have a publicly available version control system
and no new releases have been made, so instead grab the patch from Debian.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
- CVE-2016-1248: vim before patch 8.0.0056 does not properly validate values
for the 'filetype', 'syntax' and 'keymap' options, which may result in the
execution of arbitrary code if a file with a specially crafted modeline is
opened.
- CVE-2017-5953: vim before patch 8.0.0322 does not properly validate values
for tree length when handling a spell file, which may result in an integer
overflow at a memory allocation site and a resultant buffer overflow.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to the patches we have on wget 1.19, we need to
autoreconf. Unfortunately, when the autoreconfiguration process occurs
with host-gettext already built and installed, the build of wget fails
with a fairly weird error:
In file included from str-two-way.h:44:0,
from c-strcasestr.c:37:
./stdint.h:89:5: error: #if with no expression
#if
As explained in http://git.net/ml/bug-gnulib-gnu/2017-01/msg00067.html
and the links pointed by this page, this is due to an incompatibility
between the newer version of gnulib used in wget, and an older .m4 file
in gettext.
In the context of Buildroot, the easiest way to avoid the issue is to
not autoreconf wget. The wget project has conveniently released a 1.19.1
release, which contains our two patches, plus just one small feature
addition. It is therefore reasonable to apply this as a solution to this
build issue.
Fixes:
http://autobuild.buildroot.net/results/b62ac6fd5ce36453935c309e112262467cf0e3bf/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use comm(1) to check that all our config options are properly set in the
resulting configuration, rather than our canned and fragile code.
Reported-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update patch 0001-Adjust-for-buildroot-build.patch to
use real static linking (command line flag '-static' for
target gpio-static).
Fixes [1]:
[Link]
.../output/host/usr/lib/gcc/powerpc-buildroot-linux-uclibc/5.4.0/libgcc.a(unwind-dw2-fde-dip.o): In function `_Unwind_Find_FDE':
...output/build/host-gcc-final-5.4.0/build/powerpc-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde-dip.c:465: undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
make[1]: *** [gpio-static] Error 1
make[1]: Leaving directory `.../output/build/wiringpi-2.32/gpio'
[1] http://autobuild.buildroot.net/results/b905617dda0e120d04c54daf7cae2bad236ac767
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The motion autotools script helpfully detects the host
Microprocessors intr set and optimizes for it.
Disabling this feature causes autotools to use the
target parameters passed by BR instead.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script helps in testing that a package builds fine on a wide range
of architectures and toolchains: BE/LE, 32/64-bit, musl/glibc/uclibc...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- completely rewrite the script from Thomas, with help from Luca
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As now the Qt version is configurable to simplify the menu display
logic we remove the menu comment about deprecated modules and
indicate it in the relevant modules' help text instead, and also
mention in the help text if a package's tech preview status has been
changed between Qt 5.6 and Qt 5.8
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rework done on commit
accba02a47 ("toolchain: add option for
toolchains affected by GCC PR libstdc++/64735") by me was wrong. The
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 option should be enabled when the bug is
present in the toolchain, not the opposite.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit f29bb169cf (libevent: fix openssl detection when statically linking)
forced libevent to link against zlib when statically linking against openssl
as the configure script failed to do this.
Since then libevent has been bumped, and it now uses pkg-config to figure
out how to link with openssl, so ensure pkg-config is available and drop the
now-unneeded workaround.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1e7/1e7027b1b87d88b4517b1b19d3a2ae54c24f2c10/http://autobuild.buildroot.net/results/ff7/ff7e010b41e7448d15d20396e9e9bd7319dd493b/http://autobuild.buildroot.net/results/269/269a3a76f61c65423ba703a85e94cc003fb75e4c/
Libevent/libtool gets confused by the library order when statically linking
the sample programs and passes -lz before -lcrypto even though libcrypto
uses zlib.
/bin/bash ./libtool --tag=CC --mode=link .. -o sample/https-client \
sample/https-client.o sample/hostcheck.o \
sample/openssl_hostname_validation.o libevent.la \
libevent_openssl.la -lssl -lcrypto -lz -lz -lcrypto
libtool: link: .. -o sample/https-client sample/https-client.o \
sample/hostcheck.o sample/openssl_hostname_validation.o \
./.libs/libevent.a ./.libs/libevent_openssl.a \
-lssl -lz -lcrypto
../libcrypto.a(c_zlib.o): In function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x30): undefined reference to `inflate'
This is most likely fixable, but as the sample programs aren't installed /
used, simply skip building them to save time and work around this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-5357: crash with some malformed commands.
Upstream now provides .tar.lz archive. Add the necessary extract command.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ftp.netroedge.com is (also) down. Download the package from the Debian
snapshot archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable fakedate for whole build process.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
`date' is widely used by packages to include build information in their
binaries. Unfortunately, this is incompatible with BR2_REPRODUCIBLE.
Instead of having to identify all `date' invocations in the different
packages, this commit adds a small tool that allows to always return
the same date.
This work was sponsored by `BA Robotic Systems'.
[Peter: drop debugging print]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The use of the __DATE__ and __TIME__ macros are one of the most common
sources of non-reproducible binaries. In order to fix that, gcc 7 supports
the SOURCE_DATE_EPOCH variable:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934
This patch take advantage of toolchain-wrapper to provide support of
SOURCE_DATE_EPOCH to older gcc versions.
Function get_source_date_epoch() come directly from gcc git.
This work was sponsored by `BA Robotic Systems'.
[Peter: use sizeof for character array sizes, make function static,
extend commit message, add upstream gcc commit]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When pyqt is used it's obvious that qt needs to be selected and
configured by the user, hence we enforce it by making pyqt depending on
qt, rather than selecting it and depending only on the qt requirements.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When pyqt5 is used it's obvious that qt5 needs to be selected and
configured by the user, hence we enforce it by making pyqt5 depending on
qt5, rather than selecting it and depending only on the qt5
requirements.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Restrict target install to quickcontrols(1) qmls only.
Installing everything under qml/QtQuick includes e.g. quickcontrols2 if
existent in staging (but not selected). Another issue may arise e.g. for a
external package that creates more files than it installs itself under
qml/QtQuick. In that case, it would depend on the order of the packages how
much gets installed into target.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For 5.8.0
- add hashes
- qt5 need C++11 compliant compiler since 5.7 ([1])
- use different licenses: since version 5.7 Qt removed the LGPL v2.1 option in favor
of v3 with a different exception
- qt5base: renamed library to EglFSDeviceIntegration ([2])
- qt5base: remove ras-pi patch, commit c0cc5052097c723d0331a7619d686af9eb93d33c fix it ([3])
- qt5base: remove 0007-eglfs-fix-eglfs_mali-compile-for-odroid-mali.patch (upstream committed [3b])
- qt5base: remove obsolete config-option -large ([4])
- qt5base: gstreamer support fully moved to qt5multimedia, so gstreamer
related options are no longer passed ([5])
- add patch for python-pyqt5 to fix the build with Qt 5.8
- add tweak in libv4l to fix the build with Qt 5.8, originally provided
by Peter Seiderer
- add patch from Peter Seiderer fixing a build issue with freetype
For 5.6.2
- moved patches to subdir, and renumber patches
[1] http://blog.qt.io/blog/2016/06/16/qt-5-7-released/
[2] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=ec4eb4db61094179bc6a9ec26ec68fb710177053
[3] https://codereview.qt-project.org/#/c/167172/
[3b] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=f1b4bd4790860e1ff5afcec111a359bc3a91cfda
[4] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=84d3a21c9efe7efb2cce6d3bd14af1f9580b1108
[5] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=7d4da559afb62a779b3d90a65fb679cb5433f203
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- tweak commit log about GStreamer related changes, suggested by Arnout
- move the gcc 4.8 dependency from the main qt5 option to just the
qt5.8 selection, so that qt5.6 can still be built if gcc < 4.8 is
used. Noticed by Arnout.
- rename the options of the version selection to not include the
version number itself so that we don't have to keep legacy
symbols. Noticed by Arnout.
- introduce changes to qt5quickcontrols2.mk needed to handle qt5.6
vs. qt5.8, borrowed from a later patch in the series.
- add patch for python-pyqt5 to fix the build with Qt 5.8.
- add fix to libv4l.mk from Peter Seiderer to fix the build with Qt
5.8.
- renumber patches for 5.6.2, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selinux is currently disabled staticly in logrotate. This patch fixes
this by checking for libselinux and adding it as a dependecy if it has
been selected.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed both patches as they have been added to this release.
Aslo removed reference to github patch in makefile as it has been
added to this release as well.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version of ntp fixes several vulnerabilities.
CVE-2016-9311
CVE-2016-9310
CVE-2016-7427
CVE-2016-7428
CVE-2016-9312
CVE-2016-7431
CVE-2016-7434
CVE-2016-7429
CVE-2016-7426
CVE-2016-7433
http://www.kb.cert.org/vuls/id/633847
In addition, libssl_compat.h is now included in many files, which
references openssl/evp.h, openssl/dsa.h, and openssl/rsa.h.
Even if a you pass --disable-ssl as a configuration option, these
files are now required.
As such, I have also added openssl as a dependency, and it is now
automatically selected when you select ntp.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have two places where we recommend where BR2_DL_DIR
should be set: "Environment variables" and "Location of downloaded
packages". The former recommends setting BR2_DL_DIR in the .config,
the latter kind of endorses using ~/.bashrc.
We prefer suggesting the ~/.bashrc way since it avoids downloading the
same file multiple times, and anyway it's wise to have all the details
in a unique place. So remove the .config suggestion from "Environment
variables" and let it just point to "Location of downloaded packages".
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual mentions LIBFOO_GIT_SUBMODULES but does not tell what value
it should have. The implementation only checks whether the variable is
non-empty, but we should suggest a specific value to avoid people
wondering what they have to set, and to try setting weird values.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Ricardo Herrero <ricardo.herrero@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When this qemu nios2 defconfig has been added, the insternal toolchain
used for testing was build with Linux kernel headers 4.9, so
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9 was missing in the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On uClibc, finite, isinf and isnan are not directly implemented as
functions. Instead math.h #define's these to __finite, __isinf and __isnan,
which are real functions.
This confuses the Ruby configure script which use AC_REPLACE_FUNCS to
detect these, as it really checks for a function without including math.h.
Because of the naming difference the checks fail, therefore the symbols
HAVE_FINITE, HAVE_ISINF and HAVE_ISNAN are not defined.
Ruby code relies on those symbols in order to define its own version of
the finite, isinf and isnan functions. Since the symbols haven't been
defined, those definitions cause conflicts with the already-existing
functions.
Fixes:
http://autobuild.buildroot.net/results/f34/f34dc20749c6f6d12c51eddf3ee6c2ef41d7c13d/
[Peter: extend description, add comment in .mk]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcec is a cmake based package. LIBCEC_AUTORECONF is meaningless in
this context.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils-2.27 gas has bug that results in the following kind of build
error when assembling bb[cs]i.l on big-endian xtensa targets:
ieee754-sf.S:237: Error: invalid symbolic operand
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enabling TLS compression may make mbedTLS vulnerable to the
CRIME attack [1]. It should not be enabled unless is is sure CRIME and
similar attacks are not applicable to the particulare situation.
As zlib is probably enabled in most systems, the user might end up with
a vulnerable system without knowing. So, instead of enabling compression
support if the zlib package is available, we make the compression support
a config option. This way, the user has to explicitly enable compression
support and is warned by the help text about the risk.
[1] https://tls.mbed.org/kb/how-to/deflate-compression-in-ssl-tls
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version introduces a lot of bug fixes and some new API
functions.
Additionally, the IIO Daemon is now able to share the local IIO devices
through USB (using FunctionFS).
[Peter: usbd option needs 3.18+ headers, reorder options for menuconfig]
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Automatically build sudo with ldap support when openldap is enabled.
When sudo is built with ldap, /etc/sudoers is only read in for defaults,
all rules need to be provided via ldap which is configured by the user
in /etc/ldap.conf.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds inode tracking to the size-stats script so that hard
links don't cause files to be double counted. This has a significant
effect on the size computation for some packages. For example, git has
around a dozen hard links to a large file. Before this change, git would
weigh in at about 170 MB with the total filesystem size reported as
175 MB. The actual rootfs.ext2 size was around 16 MB. With the change,
the git package registers at 10.5 MB with a total filesystem size of
15.8 MB.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also making it clearer as for what each plugin dependencies are.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: invert conditions to avoid empty ifeq ... else statements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_OPENNTPD has a "depends on !BR2_PACKAGE_NTP" because the
openntpd package conflicts with the ntp package.
So the Config.in comment of openntpd should also not be visible when ntp
is selected. Otherwise the comment will show up when the user has a
non-NPTL toolchain, and once he enables NPTL support, the comment
disappears, but the package option doesn't appear.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow automatic network configuration via systemd-networkd if selected.
If systemd-networkd is enabled and $BR2_SYSTEM_DHCP is set, then create
a .network file to configure the selected network interface via DHCP.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- merge the two patches from Eric into just one
- instead of generating the dhcp.network file completely from the .mk
file, use a template file, and "sed" it with the right network
interface]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although highly recommended to be enabled, EFL's eeze can be disabled
and thus no dependency on libudev or dynamic device management.
Since 'BR2_PACKAGE_HAS_UDEV' has two ways to be satisfied (eudev or
systemd) we can't automatically select it, instead show a comment and
use 'depends on'.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
[Romain:
- Propagate the eeze dependency to enlightenment and efl Wayland
- Remove udev provider from eeze comment in efl's Config.in
- Add comments when eeze is not available]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To reduce the qt5base binary size, we can disable unnecessary features.
Instead of trying to map every qt5base option to buildroot, create a
single config that we can pass any option too. Then append those to the
ones generated by buildroot.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Originally, the opkg sources also contained the tools needed to _create_ an
opkg package. In later releases, this code has been split to a separate
package opkg-utils.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this kernel rev has numerous bug fixes, framework upgrades and new
features added.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this version bump allows usage of hardkernel's secure signatures when
booting a system
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To enable compression support using zlib it is necessary to uncomment
the define for MBEDTLS_ZLIB_SUPPORT in config.h [1].
Note, that enabling TLS compression may make mbedTLS vulnerable to the
CRIME attack [1]. It should not be enabled unless is is sure CRIME and
similar attacks are not applicable to the particulare situation.
As zlib is probably enabled in most systems, maybe it is best to make
the compression support a user choice and add the warning from [1]?
[1] https://tls.mbed.org/kb/how-to/deflate-compression-in-ssl-tls
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of a 'rule' variable that can contain 'show-depends' or
'show-rdepends' is not logical if get_depends is considered as a reusable
function from various scripts. The name of these rules are too much an
implementation detail.
Therefore, split the existing get_depends into two separate functions
get_depends and get_rdepends, while keeping code duplication to a minimum.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Functions to obtain the version and dependencies of a package from Python
can be useful for several scripts. Extract this logic out of graph-depends
into pkgutil.py.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove shebang from pkgutil.py, noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gunicorn ‘Green Unicorn’ is a Python WSGI HTTP Server for UNIX. It’s a
pre-fork worker model ported from Ruby’s Unicorn project. The Gunicorn
server is broadly compatible with various web frameworks, simply
implemented, light on server resource usage, and fairly speedy.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google deprecated feed api to cenvert rss to json, switching
to yahoo yql. This patch also reorganize the javascript code
to accomodate the fixings.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove 0001-Include-stdint.h-where-needed.patch as it was merged into
the tree.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function get_depends was recently changed to support both normal
dependencies as reverse dependencies, via a global variable 'rule' that
equals 'show-depends' or 'show-rdepends'.
As a subsequent function will extract this function get_depends to a
separate file, the use of globals is problematic.
Instead, pass the global as an argument.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sync external prebuilt toolchain with the one we now build in Buildroot,
i.e. arc-2016.09. Since that prebuilt toolchain finally has IPv6 enabled
it works pretty fine for building packages in Buildroot.
Still note:
1) There might be subtle differences between uClibc configuration
compared to Buildroot's one.
2) A couple of patches we apply on top of Builroot-built toolchain
are obviously missing in the prebuilt version - they will be
available in the next release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vlad Zakharov <vzakhar@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I also modified the Disable-building-test-programs.patch to work
with the newer Makefile.
[Peter: add s-o-b / note to patch]
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This updates Linux kernel for Synopsys ARC HS38 VDK so it matches real
platform and while at it bump kernel version to the latest.
Main changes:
* Linux kernel v4.9.6 (latest in 4.9.x series in buildroot)
* Add support of MMC controller which is used for rootfs
* Add support of UIO which is used to communicate with EVSS
Now with this update image built by vanilla Buildroot VDK has
working UART, MMC, LCD, Ethernet, UIO etc.
And while at it we rename defconfing so it:
1) Doesn't mention SMP any more - that's the only option anyways now
2) Matches common naming scheme: vendor_arch_platform
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Zakharov Vlad <Vladislav.Zakharov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
getgetopt generates code that causes compilation warnings in current
versions of gcc. If gengetopt is used for programs that set -Werror during
compilation, these compilation warnings become real problems.
Unfortunately, the gengetopt project seems dead for several years now. Last
release dates back to 2012. There is an open bug for this problem [1], with
a proposed patch, but no response from the maintainers.
Apply the patch from the bug report to fix the problem.
[1] http://savannah.gnu.org/bugs/?40243
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump squashfs with one commit to fix a compilation error on the ancient RHEL
5 distribution.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a small bug-fix release:
- include <poll.h> instead of <sys/poll.h> in gpioset
- fix a formatting issue in gpioinfo for chips with >100 GPIO lines
- fix a bug when requesting both-edges event notifications
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc-ng from 1.0.22 and up supports aarch64 architecture.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The config for ISA choice is removed for a long time as
the buildsystem does not pass -march=mips* to the compiler anymore.
For mips{32,64}r6 support NAN selection is required.
Tested with qemu mips32/mips64 defconfigs.
A small patch is required. Bug found while testing qemu defconfigs.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fixes mips{32,64}r6 support
- adds experimental aarch64 support
- fixes syscalls with 6 arguments for x86
- removes PID caching and simplifies architecture specific code
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Updated the zmq version detection patch to apply cleanly on 16.0.2.
Added patch #2 to replace compile_and_run with compile_and_forget in the setup
code: this function is only used to check for the availability of "sys/un.h" and
we only need to compile the test code to make sure of that. This fixes the
cross-compilation.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot has a mechanism to detect a too-old or missing tar program on the
host machine, and builds a custom host-tar if needed. An example situation
is a RHEL5 host machine, where tar is knowingly too old.
The apply-patches script also employs tar, in case the patches come as an
archive. However, tar is called as 'tar' without any absolute path, and the
environment does not point in any way to the possibly custom tar. As a
result, the too-old-tar is called. A particular problem is the flag '-a'
which is missing on e.g. RHEL5.
Previously, this problem went unnoticed: tar would fail, but apply-patches
did not notice it, and the overall return code of the script was 'success'.
However, commit d5ae67b4 added 'set -e' to the script, causing any error to
halt execution of the script with an error.
Fix the problem by adding the Buildroot-built host tools to the PATH when
calling apply-patches.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The originally added entries were based on 'last committer' heuristics, but
I do not particularly feel responsible for them.
Instead update the list with more appropriate entries.
Additionally, update my email address.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the sponsors page on our web site to indicate that
Google and Mind are sponsoring the Buildroot Developers Meeting at
FOSDEM 2017 in Brussels.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.9.7 has an important fix: a2104c7cd3b24c432 ("drm/atomic:
clear out fence when duplicating state"), which fixes a kernel
warning that triggers sometimes when starting/stopping ksmcube
application several times in a row.
So bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.9.6 2.6.0 YES OK (3)
arm_versatile 4.9.6 2.5.0 YES OK
arm_versatile_nommu 4.4.45 2.5.0 YES OK
arm_vexpress 4.9.6 2.5.0 YES OK
m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
microblazebe 4.9.6 2.5.0 YES OK
microblazeel 4.9.6 2.5.0 YES OK
mips32r2el_malta 4.9.6 2.5.0 YES OK
mips32r2_malta 4.9.6 2.5.0 YES OK
mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
mips32r6_malta 4.9.6 2.6.0 YES OK (3)
mips64el_malta 4.9.6 2.5.0 YES OK
mips64_malta 4.8.17 2.5.0 YES OK (6)
mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
nios2-10m50 4.9.6 2.9.0 NO OK
or1k 4.9.6 2.5.0 NO OK
ppc_g3beige 4.9.6 2.5.0 YES OK
ppc_mpc8544ds 4.9.6 2.5.0 YES OK
ppc_virtex_ml507 4.9.6 2.5.0 NO OK
ppc64_pseries 4.9.6 2.5.0 YES OK
sh4 4.9.6 2.5.0 YES OK
sh4eb 4.9.6 2.5.0 NO (1) OK
sparc_ss10 4.9.6 2.5.0 YES OK
sparc64_sun4u 4.9.6 2.5.0 YES OK
sparc_sun4u 4.9.6 2.5.0 YES OK
x86 4.9.6 2.5.0 YES OK
x86_64 4.9.6 2.5.0 YES OK
xtensa_lx60 4.8.17 2.6.0 YES OK (6)
xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.
Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes:
* Buildroot defconfig
* Mainline Linux kernel v4.9.6
* Mainline U-Boot (current HEAD revision is used, as board support
patches are not in stable release yet)
* genimage config to create sdcard image
* Board readme.txt
[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch download URL to match the website and avoid issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minimalistic C client for Redis >= 1.2
It is minimalistic because it just adds minimal support for
the protocol, but at the same time it uses a high level
printf-alike API in order to make it much higher level than
otherwise suggested by its minimal code base and the lack of
explicit bindings for every Redis command.
https://github.com/redis/hiredis
[Peter: use install -t / -D, fix arguments]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install also lxc in staging directory, this will be needed for the
incoming integration of lxd package. Moreover, other packages could
find useful to integrate with liblxc instead of using lxc-xxx binaries.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lxc can use gnutls for various checksumming so add a dependency on it if
package is selected
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: git is a runtime dependency, use pkg-config for openssl
dependencies, use make install]
Signed-off-by: Francesco Negri <francesconegri@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
* Mitigate DoS attacks that use client-initiated SSL/TLS renegotiation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needed when wayland support is enabled in xserver_xorg-server.
This patch fixes the final build error:
Making all in xwayland
make[3]: Entering directory '/home/buildroot/br5/output/build/xserver_xorg-server-1.19.0/hw/xwayland'
make[3]: *** No rule to make target '/usr/share/wayland-protocols/unstable/relative-pointer/relative-pointer-unstable-v1.xml', needed by 'relative-pointer-unstable-v1-client-protocol.h'. Stop.
when trying to build
http://autobuild.buildroot.net/results/cf0/cf026e9b18e86b9890341612050f4d166a7b822d/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perl-gd now supplies a Build.PL, but this one is not cross-compilation
friendly. So, we still use Makefile.PL like in previous version by using
the new <pkg>_PREFER_INSTALLER variable.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed the 3 patches as they have been added into the latest
version.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix license, it's MIT, not BSD
- use TARGET_CONFIGURE_OPTS instead of manually passing CC and AR
- use full destination path
- keep only sha256 hash
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway's voicemail plugin is only built if
libogg is selected, and even then there is no way to disable the plugin from
being built. This causes a example config file to be placed on
the target filing system that the user may not need or want, creates a 33K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the voicemail plugin optional, removes the check for libogg,
adds libogg as a dependency to the voicemail plugin, and selects the libogg
package automatically when the user selects the plugin.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the video room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the video room plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the video call plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the video call plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the text room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 63K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the text room plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the streaming plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 133K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the streaming plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the record and play plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 68K .so
file on the target directory, and janus will also create a warning when ran
if the plugin does not have a matching configuration file setup by the user,
as it will not use the example config file by default.
This patch makes the record and play plugin a option.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the echo test plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 36K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the echo test plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the audio bridge plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 119K .so
file on the target directory, adds the dependency of opus for this
plugin, and janus will also create a warning when ran if the plugin does
not have a matching configuration file setup by the user, as it will not use
the example config file by default.
This patch makes the audio bridge plugin a option, removes the check for opus,
adds opus as a dependency to the audio bridge plugin, and selects the opus
package automatically when the user selects the plugin.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway requires sofia-sip in the build system,
however this is unessasary. This patch makes the sip gateway plugin a
option. It also creates a menuconfig for janus gateway for the
following patches that enable selecting more optional plugins.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway currently depends on several dependencies that are not
mandatory. This commit removes all non-mandatory dependencies. The
build has been tested to work fine with this reduced set of
dependencies.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit updates comments in Config.in for BR2_USE_WCHAR for reverse
dependencies of util-linux which directly uses wchar now or when it is
pulled from other dependencies.
eudev doesn't use wchar directly, but needs C99 compiler. Autotools
generate code with wchar_t for checking C99 compiler.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit fixes all such reverse dependencies by removing dependency
on BR2_USE_WCHAR as it is not required by package itself.
Fixes: 006a328ad6 ("util-linux: fix build with ncurses")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Usually, Buildroot does never initialize variables with empty content.
DEPENDENCIES_HOST_PREREQ was an unjustified exception.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- manually install things, it's easier than using the flawed install
rules of the package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds yet another development platform for ARC.
This time around it is HAPS or ZeBU based prototyping platform used
widely for both ARC hardware and software bring-up and verification.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is used by buildroot default initscripts and results in some ugly
errors on startup otherwise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.9.6
- set up host linux headers to 4.9
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No announcement was made for this version, so the hash was calculated locally.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ccache doesn't rewrite the --sysroot base_dir from toolchain-wrapper
correctly. Resulting in a large number of cache misses when building
from different base directories.
A fix has already been accepted to the ccache upstream[1], but won't be
released until ccache 3.4. (Was noted as an improvement, so unsure
of the 3.4 release timing)
[1] https://github.com/ccache/ccache/pull/132
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the main command to control oprofile. It was introduced in
version 0.9.8 from 2012-08-27 and in version 1.0.0 the previous
control tool, opcontrol, was removed.
In commit 9863553fe8, removing avr32
support, code that added operf for !avr32 was removed rather than
keeping the code but making it non-conditional.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hook is only used to install firmware blobs, and so it
doesn't need to be declared after the kernel-module infra.
Move it where it belong, to avoid confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gst-plugins-base configure script claims that the subparse plugin is
dependency-less - but it also silently disables subparse if libxml2 is
not available. So depend on libxml2 when subparse is selected.
Note: the analogous gst1 subparse plugin does not have this requirement.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix download location
- remove <pkg>_SOURCE variable, it was the default value
- remove trailing space
- keep only sha256 hash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-3731 - Truncated packet could crash via OOB read.
CVE-2017-3732 - BN_mod_exp may produce incorrect results on x86_64
CVE-2016-7055 - Montgomery multiplication may produce incorrect results
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adam has contributed the python-mutagen and sngrep packages, so add
him as a developer for those two packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep is a tool for displaying SIP calls message flows from terminal.
It supports live capture to display realtime SIP packets and can also
be used as PCAP viewer.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- ncurses wide char and other sub-options are not needed to build
sngrep, so they are removed, as well as the wchar
dependency. ncurses with wchar support is only needed when
--enable-unicode is passed, but even then, it doesn't work because
the configure script searches <ncursesw/ncurses.h>, so unicode
support has been explicitly disabled.
- add optional dependencies on OpenSSL, GnuTLS and PCRE. This also
makes sure they are explicitly enabled/disabled depending on the
configuration.
- add upstream URL in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mutagen is a Python module to handle audio metadata.
It supports ASF, FLAC, MP4, Monkey’s Audio, MP3, Musepack, Ogg Opus,
Ogg FLAC, Ogg Speex, Ogg Theora, Ogg Vorbis, True Audio, WavPack,
OptimFROG, and AIFF audio files. All versions of ID3v2 are supported,
and all standard ID3v2.4 frames are parsed.
It can read Xing headers to accurately calculate the bitrate and
length of MP3s. ID3 and APEv2 tags can be edited regardless of
audio format. It can also manipulate Ogg streams on an individual
packet/page level.
Mutagen works with Python 2.7, 3.3+ (CPython and PyPy) on Linux,
Windows and macOS, and has no dedependencies outside the
Python standard library.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license, it's GPLv2, not LGPLv2+
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
You can bootup a OpenRISC system, networking is not working.
[Peter: drop unneeded _GETTY_PORT="ttyS0" setting]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpcre is needed at runtime not a buildtime. Indicate this in Config.in
and remove MICROPYTHON_LIB_DEPENDENCIES.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While bumping fix async feature related issue:
Both asyncsupport.py and asyncfilters.py use async feature, that is
not available in Python 2 and some features available in Python 3.6.
So in both cases *.py compilation would produce compiler errors.
Hence remove both files after package extraction.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bug-fix release that addresses the musl libc compatibility
issues encountered with buildroot.
We can also remove the patch which got merged upstream.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As recently discussed on the list:
http://lists.busybox.net/pipermail/buildroot/2017-January/182147.html
eudev no longer has legacy user space firmware loading and the
--with-firmware-path configure flag since the 3.1.3 release:
commit 3b717594600fa717cdf9bcfd0c7c1b703b245482
Author: Kay Sievers <kay@vrfy.org>
Date: Mon Sep 1 09:07:49 2014 -0400
udev: remove userspace firmware loading support
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
So drop it from EUDEV_CONF_OPTS to limit confusion.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 46d6aa520f.
Since commit 7c60211ce3 (tslib: needs kernel headers 3.12)
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 is always enabled when building tslib. No
need to check for that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- keep only sha256 hash, not needed to have md5 and sha1 when sha256 is
provided
- add BR2_USE_MMU dependency, since the program uses fork()
- remove UDPXY_MAKE_OPTS, and use the appropriate options during the
build and install steps directly
- use TARGET_MAKE_ENV in the build and install steps]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit also adds a patch that allows libselinux 2.6 to build
properly with older compilers such as gcc 4.4.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: add patch to fix gcc 4.4 build issue.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When SELinux support is enabled, the login pam file installed by
linux-pam should be adjusted to use the pam_selinux.so module.
To achieve this in a reasonably simple manner, we introduce the SELinux
related lines in login.pam as comments, and if SELinux support is
enabled, turn those commented lines into real lines.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using += is always a good idea in conditional assignments, as it
prevents potential future mistakes if unconditional options are added;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As it happens, specifying the path where to look for libsrtp is not
needed: pjsip does not use the argument to --with-external-srtp as a
search path at all; it only checks whether it is 'no' or something
else.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are a bunch of options that are left unspecified; explicitly
disable them.
The epoll case is special: the configure script is broken, and will
enable it whether we pass --enable-epoll or --disable-epoll. But that's
OK because we prefer epoll over the alternative (select). So we do not
need to fix it. Which is nice becasue the configure.ac is named
aconfigure.ac (yes, with a leading 'a'), so it does not autoreconf
nicely... :-/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flask-Babel is an extension to Flask that adds i18n and l10n support
to any Flask application with the help of babel, pytz and
speaklater. It has builtin support for date formatting with timezone
support as well as a very simple and friendly interface to gettext
translations.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Fix second Ethernet port for SoloX
- Fix LCD disable sequence
- Fix LVDS2 as primary display
Here are the main Linux modifications:
- Rebase on top of NXP 4.1.15_2.0.0 branch
- Fix touch screens interrupt conflicts
- Backport tw686x features from mainline
- Fix multiple ft5x06 touch instantiation
- Fix dirty cow vulnerability
- Various improvements to TC358743 driver
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The micropython libs load libpcre dynamically using the foreign function
interface (libffi). Without pcre the build will succeed but at run time
anything that uses the 're' module will have issues.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The install step now requires CROSS_COMPILE as some C files are
generated at install time. Also remove patches that have been applied
upstream.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop libbsd support, it's problematic and doesn't bring in any greater
benefit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
wnpa-sec-2017-01 - The ASTERIX dissector could go into an infinite loop.
wnpa-sec-2017-02 - The DHCPv6 dissector could go into a large loop.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The RPM package requires dynamic linking support (dlfcn.h) for its
capabilities related to plugins (and possibly more). The following
commit adds a dependency to !BR2_STATIC_LIBS.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-password-save option has been removed
(9ffd00e754). Since
it now defaults to "enabled" in the upstream package, there is no
point in adding Config.in.legacy support for it: Config.in.legacy
logic only kicks in when the option is enabled, but the upstream
package precisely preserve the compatibility with this situation.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2f89476 ("package/libgpg-error: bump to version 1.23") introduced
a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS which was added as a dependency
to all libgpg-error reverse dependencies.
However, rng-tools only select libgpg-error if BR2_i386 || BR2_x86_64
(for RDRAND) but the rng-tools dependency was added as
BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS && (BR2_i386 || BR2_x86_64),
Therefore limiting rng-tools to the x86 architecture.
This patch changes it as ..._ARCH_SUPPORT || !(BR2_i386 || BR2_x86_64).
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ortp now depends on bctoolbox, which means we have to add the C++
dependency of bctoolbox to ortp and its reverse dependencies.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bctoolbox is a utilities library used by Belledonne Communications
softwares like belle-sip, mediastreamer2 and linphone.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add missing dependency on BR2_INSTALL_LIBSTDCPP.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added the pure-ftp quotas option. When selected, the --with-quotas
compiler option is passed which enables the quota feature
Note that this increases the size of the pure-ftpd executable by
about 20%.
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The developper's documentation will be automatically built when doxygen
is present. But we can't guarantee that it is.
Besides, we are not interested in the devlopper's documentation.
Simply disable it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb 7.12+ by default builds with a C++ compiler, which naturally doesn't
work when we don't have C++ support in the toolchain.
Fix it by passing --disable-build-with-cxx for such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On Darwin, user's trust preferences for root certificates were not honored.
If the user had a root certificate loaded in their Keychain that was
explicitly not trusted, a Go program would still verify a connection using
that root certificate. This is addressed by https://golang.org/cl/33721,
tracked in https://golang.org/issue/18141. Thanks to Xy Ziemba for
identifying and reporting this issue.
The net/http package's Request.ParseMultipartForm method starts writing to
temporary files once the request body size surpasses the given "maxMemory"
limit. It was possible for an attacker to generate a multipart request
crafted such that the server ran out of file descriptors. This is addressed
by https://golang.org/cl/30410, tracked in https://golang.org/issue/17965.
Thanks to Simon Rawet for the report.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, mariadb's cmake script tries to detect dtrace support. On
hosts that have dtrace installed, this incorrectly enables dtrace and
causes compile errors.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a package containing a C library and a set of command-line tools
for controlling GPIOs from user space using the new character device
interface on linux.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Thomas:
- add comment about autoreconf=yes (suggested by Romain Naour)
- add more conventional syntax for the --{enable,disable}-tools usage
(suggested by Romain Naour)
- add patch to fix musl build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RunC allowed additional container processes via runc exec to be ptraced by
the pid 1 of the container. This allows the main processes of the
container, if running as root, to gain access to file-descriptors of these
new processes during the initialization and can lead to container escapes or
modification of runC state before the process is fully placed inside the
container.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5a18eabdf0.
It did not take into account all the possible situations. A different fix
will be provided in a forthcomming patch.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-0381: A remote code execution vulnerability in
silk/NLSF_stabilize.c in libopus in Mediaserver could enable an attacker
using a specially crafted file to cause memory corruption during media file
and data processing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop patches now upstream. Also enable internal glob() handling in ash,
as busybox now errors out if this isn't enabled when building for uClibc
because of bugs in the the glob(3) implementation in uClibc and musl since:
commit 3a4cdf45f928de0af09088bbbb96f60d9ac44e87
Author: Denys Vlasenko <vda.linux@googlemail.com>
Date: Wed Dec 21 04:13:23 2016 +0100
ash: error out if ASH_INTERNAL_GLOB is not selected on uClibc
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
compile also open possix
remove power management (compiled by default since commit
b74bbed51b0c0d44b70b136326a8a23cbc64db01)
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes static linking of pifmrds [1]:
host/usr/bin/arm-linux-gcc -static -o pi_fm_rds rds.o waveforms.o pi_fm_rds.o fm_mpx.o control_pipe.o -lsndfile -lm
.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(flac.o): In function `sf_flac_error_callback':
flac.c:(.text+0x44c): undefined reference to `FLAC__StreamDecoderErrorStatusString'
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(ogg.o): In function `ogg_close':
ogg.c:(.text+0x10): undefined reference to `ogg_sync_clear'
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(ogg_vorbis.o): In function `vorbis_read_sample':
ogg_vorbis.c:(.text+0x26c): undefined reference to `vorbis_synthesis_pcmout'
[1] http://autobuild.buildroot.net/results/9b7/9b7638caa8f3e82e38fb68b0321cb649618a0131
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-9317 - gdImageCreate() doesn't check for oversized images and
as such is prone to DoS vulnerabilities.
CVE-2016-6912 - double-free in gdImageWebPtr()
(without CVE):
Potential unsigned underflow in gd_interpolation.c
DOS vulnerability in gdImageCreateFromGd2Ctx()
Signed Integer Overflow gd_io.c
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- move condition to a different place in the .mk file, with other
similar conditions.
- add an 'else' clause to pass -no-libinput in order to explicitly
disable libinput support when the libinput package is not available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.20.x does not depend on libglib2 anymore. Note, that the
dependency on MMU and Thread remain, as MPD uses fork() and thread
functionality.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9576
When the path to a br2-external tree is relative, make enters an endless
recursive loop (paths elided for brevity):
$ make BR2_EXTERNAL=.. foo_defconfig
make[1]: stat: ../configs/../configs/../configs[...]/toto_defconfig: Filename too long
make[1]: *** No rule to make target '../configs/../configs/../configs[...]/toto_defconfig',
needed by '../configs/../configs/../configs[...]/toto_defconfig'. Stop.
Makefile:79: recipe for target '_all' failed
make: *** [_all] Error 2
It is a bit complex to understand the actual technical reason for this
never-ending expansion; it seems it happens in the code generated by the
percent_defconfig macro. Not sure why, though...
But the root cause is the relative path.
Just use absolute, canonical paths to br2-external trees. Always.
[Peter: add bugzilla reference]
Reported-by: outtierbert@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove patch not needed anymore: the bug has been fixed in this release.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1d6/1d6bbef2cb0c8c2e00b6d7511814ff9ddb2e3073/http://autobuild.buildroot.net/results/4c7/4c7fc92a42405e25f41394fa44f5bdc27a4538c4/
Apperently if both icu and nodejs are enabled during the nodejs host build
the nodejs buildsystem gets confused by the icu version installed by
Buildroot (icu 58.2) and the one bundled with the nodejs source tree(icu
57), which ends up in linking-time errors as:
"""
undefined reference to
`icu_58::NumberFormat::format(icu_58::StringPiece,
icu_58::UnicodeString&, icu_58::FieldPositionIterator*, UErrorCode&)
const'
"""
(note the icu_58 in the symbol name while the bundled icu version is 57)
This patch disables the (not used) i18n support in the nodejs host build
config in order to fix the issue. The issue doesn't affect the target build of
nodejs.
[Peter: add autobuilder references]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a critical authentication vulnerability in the MQTT plugin
(CVE-2016-9877):
MQTT (MQ Telemetry Transport) connection authentication with a
username/password pair succeeds if an existing username is provided but the
password is omitted from the connection request. Connections that use TLS
with a client-provided certificate are not affected.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The problem addressed by 0001 patch has been fixed upstream and is that
fix is included in this release:
aa107497cd
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches from 4.8 version don't apply. Update them by backporting
liteBoard support from Linux master branch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is already support in newest U-Boot version, so drop existing
U-Boot patches.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-Fix-Add-missing-pthread.h-include.patch already included in this
release:
5f702b6071
--with-xml-prefix configure option doesn't exist, so drop it:
configure:22815: WARNING: unrecognized options: [snip], --with-xml-prefix
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfixes:
- CVE-2016-9131: A malformed response to an ANY query can cause an
assertion failure during recursion
- CVE-2016-9147: An error handling a query response containing inconsistent
DNSSEC information could cause an assertion failure
- CVE-2016-9444: An unusually-formed DS record response could cause an
assertion failure
- CVE-2016-9778: An error handling certain queries using the
nxdomain-redirect feature could cause a REQUIRE assertion failure in db.c
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use upstream provided tarball.
Upstream switched to cmake.
libjpeg dependency is now optional.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although tremor (the library is named vorbisidec) provides a pkg-config
file, mpd does not use it to find tremor. Since version 0.20 does throw
an error instead of a warning, that's why the issue was left unnoticed
by the autobuilders.
Help mpd to find tremor by providing the path to the library and passing
LIBS through the environment. We use the host pkg-config tool to get the
correct values from the vorbisidec.pc file.
Fixes:
http://autobuild.buildroot.net/results/6b9/6b97403e70caa12c32494b1c82ce61d3e4e456f6/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
[Peter: part 2, boot.scr / defconfig changed accidently got dropped]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build of the ustr package also needs to not run the ldconfig to
prevent a build failure caused by the symlink creating a race condition.
Related commit for target build change was 22069232.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version is marked as "stable" on php-imagick's website, plus is
necessary for the upcoming php-7.1 version bump.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.5.x has been promoted to stable, hence 3.4.x is deprecated and
3.3.x kept as old-stable.
libdane now specifies LGPLv2.1+ so drop the README kludge (which is also
gone regarding licensing).
libunistring is a new dependency, even though gnutls ships a builtin version
we prefer to use unbundled to avoid duplication with other users and target
size growth.
Fixes:
GNUTLS-SA-2017-01 - It was found using the OSS-FUZZ fuzzer
infrastructure that decoding a specially crafted X.509 certificate with
Proxy Certificate Information extension present could lead to a double
free.
GNUTLS-SA-2017-02 - It was found using the OSS-FUZZ fuzzer
infrastructure that decoding a specially crafted OpenPGP certificate
could lead to heap and stack overflows.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-8707 (Fix possible buffer overflow when writing
compressed TIFFS). This CVE fix is included since 7.0.3-9:
fde5f55af9
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove the patch since it's already contained in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3d707d2b (mysql: rename package to oracle-mysql, make a virtual
package) introduced a user selectable virtual BR2_PACKAGE_MYSQL package, but
didn't propagate the (common) dependencies of the two variants to it, so the
virtual package can now be selected even though neither of the variants are
available.
As several packages enable mysql support when BR2_PACKAGE_MYSQL is selected,
this causes a number of autobuilder issues:
http://autobuild.buildroot.net/results/7fe/7fe0d0a3e7ed0430852dc42b718dd037557207e8/http://autobuild.buildroot.net/results/cc4/cc4c2d936f3e1ba6c0a9782b2218de54a4ff75d2/
Fix it by propagating the common dependencies of the two variants to the
virtual package to ensure it cannot be enabled unless at least one of them
are available.
Also move the toolchain comment outside the conditional so it is visible
when mysql isn't available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the KMS video sink element. From the Gstreamer 1.10
release notes:
"New element kmssink to render video using Direct Rendering Manager (DRM)
and Kernel Mode Setting (KMS) subsystems in the Linux kernel. It is oriented
to be used mostly in embedded systems."
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f09b33a0a (qextserialport: fix static build) adjusted the logic for
static builds, but the change contained a typo - It disabled
_INSTALL_STAGING for static builds, not _INSTALL_TARGET.
The autobuilders didn't detect this as nothing links against qextserialport
(so the missing staging install didn't cause issues) and the target install
command was only defined for !static.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent perls are built with the `default_inc_excludes_dot` option.
As many CPAN modules rely on '.' in @INC, the toolchain
must set `PERL_USE_UNSAFE_INC`.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3fd9c062e (nodejs: bump to version 6.9.2) bumped the 6.x version but
forgot to rename the patch directory, so the patches were no longer used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ecore will reach 'upower' using D-Bus system bus in order to detect if
the system state changes and let applications know about the power
state such as low battery or AC power in order to optimize their power
consumption.
For host this is not needed and would not work, since output/host DBus
declares its own output/host/var/run/dbus/system_bus_socket, which has
no dbus-daemon and thus no services in it.
For target it's optional and only installed if BR2_PACKAGE_UPOWER=y,
otherwise it prints error messages about missing upower service.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We unfortunately cannot easily download these because of the file names (not
ending in patch) and patch format (p0), so convert to p1 format and include
in package/bash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Revert the decision to remove the wrappers, but remove the extra
Config symbol and add it by default. Required for kmod package.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security related fixes:
- Heap-based buffer overflow in rfbproto.c in LibVNCClient in LibVNCServer
before 0.9.11 (CVE-2016-9941)
- Heap-based buffer overflow in ultra.c in LibVNCClient in LibVNCServer
before 0.9.11 (CVE-2016-9942)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfixes:
- CVE-2017-5193: Correct a NULL pointer dereference in the nickcmp function
found by Joseph Bisch (GL#1)
- CVE-2017-5194: Correct an error when receiving invalid nick message (GL#4,
#466)
- CVE-2017-5195: Correct an out of bounds read in certain incomplete control
codes found by Joseph Bisch (GL#2)
- CVE-2017-5196: Correct an out of bounds read in certain incomplete
character sequences found by Hanno Böck and independently by J. Bisch
(GL#3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches and related autoreconf.
Re-enable parallel builds to check against the autobuilders.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch #0002 which was already fixed upstream long time ago in
commit 276a0d9500b8efc879e4f0c23e9d0e361849e295 using a slightly
different approach.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update our patches:
- drop patch 1, replaced by an upstream equivalent; adapt config
options and env accordingly,
- drop patch 2, applied upstream,
- rename patch 3
gdlib-config and net-snmp-config are only used when said support is
enabled (resp. CGI and SNMP), so no need to pass them unconditionally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security related fixes:
This flaw is caused by loading data from external sources (file, custom ctx,
etc) and are hard to validate before calling libgd APIs:
- fix php bug 72339, Integer Overflow in _gd2GetHeader (CVE-2016-5766)
- bug #248, fix Out-Of-Bounds Read in read_image_tga
- gd: Buffer over-read issue when parsing crafted TGA file (CVE-2016-6132)
Using application provided parameters, in these cases invalid data causes
the issues:
- Integer overflow error within _gdContributionsAlloc() (CVE-2016-6207)
- fix php bug 72494, invalid color index not handled, can lead to crash ( CVE-2016-6128)
- improve color check for CropThreshold
The build system now enables -Wall and -Werror by default, so pass
--disable-werror to disable that. Notice that this issue has been fixed
upstream post-2.2.3:
https://github.com/libgd/libgd/issues/339
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changed _SITE url to the upstream project site because Sourceforge does
not provide the tarball for 1.2.10 as of now.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enca and libguess options have been dropped so adjust accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Riemann-c-client is a C client library for the Riemann monitoring system,
providing a convenient and simple API, high test coverage and a copyleft
license, along with API and ABI stability.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel versio to 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-8859 - fixes a serious under-allocation bug in regexec due to
integer overflow.
Drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though 'CONFIG_USB=n' does the job, let's switch to the more
standard way for disabling a Kconfig symbol.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream commit a8c696bf09d8151323f6e99348c4bc8989f829c8 makes ifup and
ifdown individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
Add a patch which fixes the dependency by checking for IFUP or IFDOWN,
instead of the obsolete IFUPDOWN.
Upstream status: Pending
http://lists.busybox.net/pipermail/busybox/2016-December/085034.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the minimal configuration file. There is at
least one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the minimal configuration file by loading the busybox.config file
and saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the configuration file. There is at least
one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the configuration file by loading the busybox.config file and
saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a NULL pointer dereference bug in png_set_text_2()
CVE not assigned yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch did contain the correct newlines, but they got stripped by
patchwork so now the patch no longer applies.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The LUAROCKS_TARGET_FINALIZE_HOOKS is not running, so detritus is being left
in /usr/lib/luarocks. This is because host-luarocks is built by being a
dependency in the luarocks package infrastructure, not by being selected by
kconfig symbol. This means that the $(PKG)_KCONFIG_VAR in pkg-generic.mk is
not met, and (HOST_)LUAROCKS_TARGET_FINALIZE_HOOKS is not added to the
global TARGET_FINALIZE_HOOKS.
This mod fixes this issue by adding the host-luarocks hook directly
to TARGET_FINALIZE_HOOKS when either lua or luajit is enabled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use mainline 4.9 instead of a custom kernel based on NXP 4.1.
As mx7 boots in non-secure mode in mainline kernel, change the
U-Boot target to "warp7".
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tar --no-recursion option is position sensitive. It only affects following
file listing options. Move --no-recursion before the -T option to make it
effective. This fixes duplication of entries in the generated rootfs.tar
archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 since it's not fixed in
Binutils 2.26.
Runtime tested with an experimental version of Qemu 2.7 for Nios2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recently, the autoconf macros for libtool started using '/usr/bin/file'
to determine the type of library that is generated by the toolchain.
Packages that use this recent version of the libtool autoconf macros
will fail in a rather dramatic way when /usr/bin/file is not present
on the host: the package will still build but no shared library is
generated, which in turn may cause build failures in other packages
that link with it.
For example, libpng's configure determines that it is not possible to
build a shared library on MIPS64 because the expected output from 'file'
is not present. Therefore, only a static libpng.a is built. Later,
bandwithd links with -lpng but it doesn't use the pkg-config's
Private-Libs (because it's not linking statically) and it doesn't have
access to the NEEDED reference from the shared library. Therefore, it
doesn't link with zlib and fails with
pngrutil.c:(.text+0x55c): undefined reference to `inflate'
We cant use host-file because it is itself an autotools package and is
itself using libtool, so this would be a chicken-n-egg problem. Besides,
the libtool script really wants to call /usr/bin/file, so it would not
even find our host-file anyway.
So, just require that '/usr/bin/file' is present on the host.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The module DB_File (Berkeley DB wrapper) is a Perl core module.
Long time ago, its build as a core module was broken.
Since perl-cross-1.0.2, this issue is fixed.
So, this package which build DB_File as CPAN module, becomes useless.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove all patches as they are upstream.
Remove MALLOC_GLIBC_COMPAT and UCLIBC_HAS_OBSTACK as they got removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No features are added or removed. This release contains
just a fix for CVE-2016-9963
- Fix CVE-2016-9963 - Info leak from DKIM. When signing DKIM, if
either LMTP or PRDR was used for delivery, the key could appear in
logs. Additionally, if the experimental feature "DSN_INFO" was used,
it could appear in DSN messages (and be sent offsite).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At compile-time the docker build scripts generate a version file used
to build the output of the docker version command. This file is
generated somewhat properly by the Buildroot build system, however the
version number and commit ID are incorrectly formatted. This patch fixes
the output to the correct format.
This is important as some tools like WeaveWorks won't even start unless
they can parse the Docker Version output correctly.
[Peter: strip v from version using patsusbt]
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the write_prometheus plugin, it requires the
libmicrohttpd and protobuf-c libraries.
[Peter: add note about where dependencies come from]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the gps plugin that uses libgps from the gpsd
package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libpqos library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libdpdk library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new hugepages dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libgrpc++ library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the mqtt (mosquitto) plugin.
Place it under the write category even though it can read as well, since
it will normally be used to write (publish) rather than read
(subscribe).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new cpusleep dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new chrony dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libxenctrl library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's intended for solaris so no usage case for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a no-op since it's disabled/enabled by the config knob.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new notify_nagios dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-9594 - Unitilized random
Libcurl's (new) internal function that returns a good 32bit random value was
implemented poorly and overwrote the pointer instead of writing the value
into the buffer the pointer pointed to.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which includes the gcc5+ fix for ftrace:
commit aeea3592a13bf12861943e44fc48f1f270941f8d
Author: Behan Webster <behanw@converseincode.com>
Date: Wed Sep 24 01:06:46 2014 +0100
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Otherwise, the build dies with:
arch/arm/kernel/return_address.c:66:7: error: redefinition of ‘return_address’
void *return_address(unsigned int level)
^
In file included from include/linux/ftrace.h:20:0,
from arch/arm/kernel/return_address.c:12:
./arch/arm/include/asm/ftrace.h:48:21: note: previous definition of ‘return_address’ was here
extern inline void *return_address(unsigned int level)
^
For more details, see:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616889
notice: Only build tested as I don't have the hw, which is also why the
kernel is only bumped to 3.18 to make it as safe as possible.
CC: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 006a328ad6 ("util-linux: fix
build with ncurses"), we have a build failure that occurs with musl
toolchains when wide-char support is not enabled in ncurses.
The problem comes from the fact that musl provides wchar support (so it
defines wchar_t). But when ncursesw is not available, we currently pass
--disable-widechar which tells util-linux that wchar support is not
available at all (not only in ncurses). When this gets passed to
util-linux configure script, then it defines its own wchar_t, which
conflicts with the musl definition.
So, we should not pass --disable-widechar when BR2_USE_WCHAR=y, which is
what this commit does: it moves the BR2_USE_WCHAR logic outside of the
ncurses logic, and passes --enable-widechar/--disable-widechar as
appropriate.
However, there's a gotcha: util-linux really wants the ncursesw variant
of ncurses when the system has wchar support enabled. We take this into
account by:
- Enabling ncursesw when BR2_PACKAGE_NCURSES_WCHAR=y. In this case, we
have ncurses and we have BR2_USE_WCHAR=y, so everything is fine.
- Otherwise, enabling ncurses when BR2_PACKAGE_NCURSES=y but
BR2_USE_WCHAR is disabled.
To make sure that the existing util-linux programs that need ncurses
support still build fine, we adjust the Config.in to select
BR2_PACKAGE_NCURSES_WCHAR on BR2_USE_WCHAR=y configurations.
Fixes:
http://autobuild.buildroot.net/results/19de2a0b12380ddc86dbba0dae3a3877b25f83ff/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0002-arm-add-phys_to_virt.h-and-iomem.patch is now obsolete as
it's been properly fixed upstream now.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides skalibs, a collection of free software / open
source C development files used for building all softwares from
skarnet.org.
Note that, though skalibs (and all skarnet softwares) follows the
"./configure; make; make install" convention, it does not behave like a
traditional autotools project:
- static libraries are installed in $prefix/usr/lib/skalibs.
- pkg-config and libtool are not used: instead a custom system called
"sysdeps" is used and locations to libraries and headers are to be
passed explicitly via options of the './configure' script.
The host variant is provided to allow building the host variants of the
other skarnet softwares.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: remove post install target hook, do it directly in the target
installation commands.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
util-linux version 2.29 changed ncurses handling a lot. pkg-config
support to detect ncurses is removed from configure.ac and
ncurses-config is used to detect it. But it even didn't allow to
change config file for cross compilation. However, it is fixed in
upstream later and pkg-config support is added back.
This commit adds two patches from upstream that adds pkg-config support
and allows specifying ncurses-config file as well. However preference is
first given to pkg-config and later ncurses-config file. It also first checks
for version 6 and later 5.
Config option that changed are, ncursesw is enabled by default and ncurses
is disabled by default. So we need to explicilty specify with/without wide
char support now. This new version also allows disabling widechar support.
But it can't be enabled if ncurses without widechar support is enabled.
While building ncurses package, we explicitly enable pkg-config support,
so we don't need to specify ncurses-config file, but it is specified for
completeness.
Fixes:
http://autobuild.buildroot.net/results/4a2/4a25fb0d4546391d5dbbaa6cde17c45aeddb3549
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version bump as a dependency of Docker-Engine v1.12.5.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the libc-compat.h musl workaround patch to the copy of the kernel header.
Add a patch adding missing limits.h for musl.
Drop 0001-Avoid-in6_addr-redefinition.patch; not needed after the
libc-compat.h patch.
Drop upstream 0003-iproute2-tc_bpf.c-fix-building-with-musl-libc..patch.
Drop 0004-iproute-no-iptables.patch; should be fixed by upstream commit
4710e46ec3 (tc, ipt: don't enforce iproute2 dependency on iptables-devel).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's missing the dependency on lua, hence when using the upcoming PPS
support its staging directory isn't populated with the required
dependencies resulting in build failure.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit 9101ce5800 (runc: pass -extldflags '-static' on when
BR2_STATIC_LIBS=y) contained a small copy/paste error, FLANNEL_GLDFLAGS was
used instead of RUNC_GLDFLAGS.
[Peter: refer to exact commit]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-7067.
Note that since version 5.20.0 monit optionally depends on zlib.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"\r\n" sequences were not properly filtered when handling redirections.
This allowed an attacker to perform CRLF attacks such as HTTP header
injection:
https://github.com/bottlepy/bottle/issues/913
Python-bottle now uses setuptools instead of distutils.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added the pure-ftpwho config option. When selected, the --with-ftpwho
compiler option is passed which enabled the pure-ftpwho command.
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
* Fix a NULL pointer dereference (#776026)
* Fix a memory leak (#776020)
* Avoid a buffer overrun in the qtif loader ($#775648)
* Fix a crash in the bmp loader (#775242)
* Fix crash opening pnm images with large dimensions (#775232)
* Prevent buffer overflow in the pixdata loader (#775693)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These aren't supported upstream any more so remove the options and add
them to legacy.
Also switch the older deprecations that used 3.14.x to 3.12.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rsyslog package provides input and output plugins for journald which
are disabled by default. The following adds the option to include
`imjournal` and `omjournal` modules when building for a systemd target.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configuration flags `--enable-systemd` and `--disable-systemd` do
not exist in rsyslog (and may have never existed; most likely copy-paste
from other packages which have said options); removing the options.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3e3fef39e7 added new and improved
patch handling, with BR2_TARGET_UBOOT_PATCH. This was in addition to
the existing BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR option, that only
handled directories.
Later, commit 21b25d28fc moved the old
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR to legacy options. But on the way,
bad things happened:
* The original option was a string, while the one added to Config.in.legacy
is a bool. This results in a warning from defconfigs that actually define
the old BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR (because a string is not a valid
value for a bool), but it does not result in the legacy option being
selected. Consequently, BR2_LEGACY is not selected either.
* The advice at the top of Config.in.legacy to add a hidden WRAP option
to select BR2_LEGACY was not heeded.
* The advice at the top of Config.in.legacy to use the old string
option as the default for the new string option was not heeded. In
this case, the variable was not just renamed, as the old option
supported directories only, while the new one supports files too.
But since the old option is a subset of the new option, it can still
be used to set a useful default.
So, this mod turns the legacy option back to a string, adds a hidden
bool WRAP option to set BR2_LEGACY when the string is non emoty, and
uses the legacy option to set the default for the new option.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "command-line editing support was updated" does not indicate
the package name, unlike the other legacy options. This commit
adds "sqlite", to be nicer.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix out-of-bound access in create_url_list()
If there is an invalid URL in URLS->buf after a valid one, uri_parse is
called with out pointing after the allocated memory. As uri_parse writes
to *out before returning an error the loop in create_url_list must be
stopped early to prevent an out-of-bound access.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If there's no registered handler for a POST request, the default behaviour
is to write it to the filesystem. Several million deployed devices appear
to have this behaviour, making it possible to (at least) store arbitrary
data on them. Add a configure option that enables this behaviour, and change
the default to just drop POSTs that aren't directly handled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two new dependencies:
python-contstantly: runtime only
python-incremental: both runtime and build-time dependency
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-10009 - ssh-agent(1): Will now refuse to load PKCS#11 modules
from paths outside a trusted whitelist
CVE-2016-10010 - sshd(8): When privilege separation is disabled,
forwarded Unix-domain sockets would be created by sshd(8) with the
privileges of 'root'
CVE-2016-10011 - sshd(8): Avoid theoretical leak of host private key
material to privilege-separated child processes via realloc()
CVE-2016-10012 - sshd(8): The shared memory manager used by
pre-authentication compression support had a bounds checks that could be
elided by some optimising compilers
http://seclists.org/oss-sec/2016/q4/708
Drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09 release version.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This configuration provides a basic setup for using Buildroot
to create a sd-card image a BeagleBoard X15 board.
[Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11]
Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xfsprogs now builds fine with Buildroot default uClibc configuration, so
there is no point in having a specific comment: we don't have this for
any other package, and it's basically impossible to maintain.
UCLIBC_SV4_DEPRECATED is still disabled in the Buildroot default uClibc
configuration, but xfsprogs builds fine without it.
UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is now enabled in the Buildroot default
uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the new upstream site on kernel.org, and to a .tar.xz
tarball. The patches are simply refreshed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first patch was Git formatted, but additional information at the top
made it unapplicable by Git, fix this.
The second patch was not Git formatted at all.
Since upstream uses Git, it makes sense to have Git formatted patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow installation of the x11 egl support required for the X11 ddx
driver. The BR2_PACKAGE_ODROID_MALI_X11 hidden option will be selected
by the X11 DDX driver.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- select BR2_PACKAGE_LIBDRM,
BR2_PACKAGE_XLIB_{LIBX11,LIBXFIXES,LIBXEXT,LIBXDAMAGE} from
BR2_PACKAGE_ODROID_MALI_X11 in order to avoid numerous "if" in
Config.in
- Use a single assignment to ODROID_MALI_DEPENDENCIES to add the
dependencies for libdrm and the X11 libraries.
- Introduce ODROID_MALI_HEADERS_SUBDIR and ODROID_MALI_LIBS_SUBDIR to
clarify the location of the headers and libraries for the selected
architecture/display backend in the Mali tree.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When systemd is selected, xorg-server must have config-udev-kms
enabled in order to build correctly, but it won't be the case if
BR2_PACKAGE_XPROTO_DRI2PROTO is not part of the build.
Add BR2_PACKAGE_XPROTO_DRI2PROTO as a dependency of xorg-xserver
only when systemd is part of the build.
Fixes bug #9486.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version add the C++11 support and microdump.
Add the C++11 dependency since it's now mendatory.
Use the same linux-syscall-support version as the one defined by DEPS
file in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas: propagate the C++11 related dependency to
BR2_GOOGLE_BREAKPAD_ENABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google-breakpad moved to a new git repository last year and the old svn
repository has been deleted. So, the Buildroot archive mirror is used.
svn: E160013: Unable to connect to a repository at URL 'http://google-breakpad.googlecode.com/svn/trunk'
svn: E160013: '/svn/trunk' path not found
--2016-11-27 10:42:34-- http://sources.buildroot.net/google-breakpad-1373.tar.gz
Swith to the git repository using the git hash corresponding to the
1373 svn revision. But there is an issue with the third parties...
Some of them are not bundled with Google-breakpad or as git submodule.
Even worst, the google-breakpad source code use #include
"third_party/lss" directly, so we can't provide missing third parties
with an external package.
That's why the linux-syscall-support package was added to Buildroot,
it provide the missing linux_syscall_support.h file which is must be
copied to src/third_party/lss/ in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same way TARGET_CC was not being used during the build, TARGET_AR
was not used either. Now TARGET_CONFIGURE_OPTS is injected into
LVM2_MAKE_ENV which should include all the toolchain substitutions.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If not set the system will use an empty string which will result in
download errors for 'linux-.tar.gz' packages.
This patch makes it obvious to the user that the variable needs to be
set.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit turns mysql into a virtual package, after renaming the
original mysql package to oracle-mysql. This way, all existing packages
that "depends on" or "select" BR2_PACKAGE_MYSQL continue to work with no
modification.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd currently has selinux disabled unconditionally. This prevents
/sys/fs/selinux from being mounted automatically at boot which causes
audit to no longer function. This patch fixes the problem by checking if
libselinux is enabled and enabling support for selinux in systemd if so.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-aespipe fails on
$ cat /etc/debian_version
stretch/sid
at linking stage:
/usr/bin/gcc -L/home/buildroot/br6/output/host/lib -L/home/buildroot/br6/output/host/usr/lib -Wl,-rpath,/home/buildroot/br6/output/host/usr/lib -o aespipe aespipe.o aes-amd64.o md5-amd64.o md5-2x-amd64.o aes-intel64.o sha512.o rmd160.o
/usr/bin/ld: aes-amd64.o: relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
Fix is also used in Debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837393
[Peter: add comment explaining why]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The orangepi board variants use identical post-build and post-image scripts,
so move them up to board/orangepi and add symlinks in the variant
subdirectories, similary to how we handle it for the raspberry pi variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline u-boot 2016.09.01
- mainline kernel 4.9
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename orangepipc files, configs, and directories:
- oragepipc_defconfig -> orangepi_pc_defconfig
- board/orangepi/orangepipc -> board/orangepi/orangepi-pc
The purpose of the patch is to improve readability before
adding other boards of orangepi family.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that 7.12 has been added and 7.11 is the default version, let's
remove the old 7.9 release.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
7.12 is around, 7.11 has already seen a point release, so it's time to
make 7.11 the default version for gdb.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb 7.12 was released on October 2016, it's time to include it in
Buildroot, which this commit does.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The only security bug fixed concerns windows so it's not a security bump
for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when there is no syztem device table (permissions or static
devices) defined, then package permissions are not applied, because they
are guarded by the check on the system device tables being non empty.
Fix that by narrowing the guarding condition.
Note that the dependency on host-makedevs was not conditional; we always
build it even if we don't need it. Making it conditional is not
possible, because we don't know all the packages permissions by the time
the fs infra is parsed (packages from br2-external are parsed after it).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udoo neo files are currently placed inside udoo/neo directory.
Place the mx6qdl udoo related files inside udoo/mx6dl for consistency.
[Peter also update path in readme.txt]
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rev0 is very old (E.G. from before Linux was maintained in git), the kernel
prints a scary warning when used:
EXT4-fs warning (device sda): ext4_update_dynamic_rev:746: updating to rev 1
because of new feature flag, running e2fsck is recommended
And rev0 support is broken in u-boot 2016.11:
http://lists.denx.de/pipermail/u-boot/2016-December/275916.html
So default to rev1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As console=ttymxc0 is passed in U-Boot we can use /dev/console to
access the serial console and then BR2_TARGET_GENERIC_GETTY_PORT
can be removed.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnl3 include path was hardcoded in the configure script,
causing the following gcc warning:
WARNING: unsafe header/library path used in cross-compilation:
'/usr/include/libnl3'
Let's apply an upstream patch that addresses the issue: now
pkg-config is used to detect libnl include path.
Also:
- add optional libnl build dependency;
- enable libnl support only when libnl package is selected.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some patches are not necessary anymore as upstream fixed the issues.
As we are not patching configure.ac anymore, there is no need to
autoreconf the package.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mx6sx udoo neo boards. For more information about these
boards, please check:
http://www.udoo.org/udoo-neo
The U-Boot and kernel dts patches will be removed when we bump U-Boot
to 2017.01 and kernel to 4.10 version as they have already been sent
upstream.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to kernel 4.9 and remove the wifi dts patch as it is already
part of 4.9.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an integer buffer overflow in the jpeg loader (details still
embargoed).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch from a PHP Github pull request that fixes the build at -O0
on AArch64.
Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
[Thomas: improved patch commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the commit 64544178f1 many packages
broke because they could not find the ext2fs.pc file.
This is perfectly normal, as the DESTDIR and the install target were not
passed anymore to make.
[Peter: remove redundant E2FSPROGS_INSTALL_STAGING_OPTS]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the 1.5-b1 release notes:
Added ARM 64-bit (ARMv8) NEON SIMD implementations of the commonly-used
compression algorithms (including the slow integer forward DCT and h2v2 &
h2v1 downsampling algorithms, which are not accelerated in the 32-bit NEON
implementation.) This speeds up the compression of full-color JPEGs by about
75% on average on a Cavium ThunderX processor and by about 2-2.5x on average
on Cortex-A53 and Cortex-A57 cores.
Add it unconditionally for all aarch64 cores, as neon support is required
for all "standard" ARMv8 implementations. If an ARMv8 implementation w/o
NEON ever shows up, then we will need to add a BR2_AARCH64_CPU_HAS_NEON and
handle it like ARM.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the 1.5-b1 release notes:
Added full SIMD acceleration for PowerPC platforms using AltiVec VMX
(128-bit SIMD) instructions. Although the performance of libjpeg-turbo on
PowerPC was already good, due to the increased number of registers available
to the compiler vs. x86, it was still possible to speed up compression by
about 3-4x and decompression by about 2-2.5x (relative to libjpeg v6b)
through the use of AltiVec instructions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preperation for adding more architectures to the jpeg-turbo simd
handling, introduce a hidden BR2_PACKAGE_JPEG_SIMDS_SUPPORT symbol and use
that to enable simd support and default to jpeg-turbo, instead of open
coding it in both places.
While we are at it, reword the help text to be more useful.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The jpeg-turbo configure script now contains PKG_PROG_PKG_CONFIG, even
though it doesn't so far use pkg-config to detect any dependencies (it does
install a .pc file now though):
checking pkg-config is at least version 0.9.0... ./configure: line 13540: \
/home/peko/source/buildroot/output/host/usr/bin/pkg-config: No such file or directory
Depend on host-pkgconf for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building tar package with acl in static build configuration, we
get definition clash error for 'quote' function.
../gnu/libgnu.a(quotearg.o): In function 'quote':
quotearg.c:(.text+0x12fc): multiple definition of 'quote'
../sysroot/usr/lib/libacl.a(quote.o):/home/test/autobuild/run/instance-1/output/build/acl-2.2.52/libmisc/quote.c:27: first defined here
In acl upstream, this is already fixed by renaming quote and unquote
internal functions. This commit backports upstream patch.
Fixes:
http://autobuild.buildroot.net/results/d64/d64d13745c980d322d3b80c3b324d03eb7f17262
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Document LIBFOO_WAF_OPTS, LIBFOO_BUILD_OPTS, LIBFOO_INSTALL_STAGING_OPTS
and LIBFOO_INSTALL_TARGET_OPTS.
Also document LIBFOO_CONF_OPTS which was missing in waf-package
reference.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We correctly set LDCONFIG=true for MAKE_OPTS, but not for the other
steps which don't inherit it, and therefore e2fsprogs tries to use the
host ldconfig during staging and target installation, which causes some
weird error messages at build time (even if they don't abort the build).
Fix that by passing LDCONFIG=true at install time.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments pased to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
Now, we're left with a long list of unsafe paths, somehow hidden within
the code, which can use the same mechanism we use for arguments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments passed to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
It was made specific to the arguments (the structure member is named
'arg'), but can also be used to store the unsafe paths as well.
Also, that piece is almost un-documented.
Rename the structure member so that it is more generic, and add a bit of
comments to explain the whole of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For each build step, --notests needs to be passed to waf script
to avoid runing the unit tests.
This allow to remove the patch removing the unit tests from wscript.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script
for each build step. Add the possibility to do so by defining
<pkg>_WAF_OPTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script in
build step. Add the possibility to do so by defining <pkg>_BUILD_OPTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script
in install step. Add the possibility to do so by defining the
following variables:
<pkg>_INSTALL_STAGING_OPTS for the install to staging directory
<pkg>_INSTALL_TARGET_OPTS for the install to target directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- Move to a submenu "External AngularJS plugins", much like we have an
"External JQuery plugins" menu. Therefore, remove the "select
BR2_PACKAGE_ANGULARJS" from the package, since
angular-websocket/Config.in is now included only if
BR2_PACKAGE_ANGULARJS is defined.
- Add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix some static linking issues for Xtensa/Blackfin.
Optimize the size for non-threaded static binaries and
fix static C/C++ applications when running on the target.
Fix noMMU madvise declarations.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains the core policy utilities that are required
for basic operation of an SELinux system.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- Move the Config.in comment at the top of the Config.in file rather
than between the main option and its sub-options, as this breaks
menuconfig indentation.
- Fix the propagation of the libsemanage dependencies. libsemanage
depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS and
BR2_TOOLCHAIN_USES_GLIBC which were not accounted for. Since it
depends on BR2_TOOLCHAIN_USES_GLIBC, then all the gettext related
handling becomes useless and has been removed.
- Rename the prompt of the restorecond sub-option to just
"restorecond".
- Use TARGET_CONFIGURE_OPTS and HOST_CONFIGURE_OPTS instead of
passing LDFLAGS, CC, etc. manually.
- Use make "foreach" function for loops instead of shell "for" loops.
- Rework the explanation of why we're passing DESTDIR at build time.
- Minor formatting tweaks here and there.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
QEMU provides a single system emulator that supports both powerpc64
and powerpc64le with a target called 'ppc64-softmmu', but it provides
a different usermode emulator for each one (with targets
'ppc64le-linux-user' and 'ppc64-linux-user').
Due to this asymmetry it is not possible to support both cases with
the single arch value used in the package file. This patch introduces
an additional value into the package configuration,
HOST_QEMU_SYS_ARCH, so that both cases can be supported.
Fixes commit d2ff457e88
and autobuilder failture
http://autobuild.buildroot.net/results/a2d63e21c3e82c36f4a975e90ed56faba18e97a5
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas:
- Rewrap Config.in help text
- Use "depends on" rather than "select" for the audio backend options
- Slightly simplify some of the prompts for the audio backend selection
- Remove MIMIC_INSTALL_STAGING = NO, that's the default
- Use += when assigning MIMIC_DEPENDENCIES
- Remove double quotes when setting --with-audio=.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The symbol to control static compilation was renamed in 2015.02, but missed
when swupdate was added.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The EFL Wayland support was removed with commit [1] since the dependecy
on libdrm was missing. Also it requires OpenGL ES with EGL, Evas DRM
and Evas GLES DRM support [2].
As stated in configure, Evas GLES DRM engine support (gl_drm) depends
on wayland-client to build (wayland-client >= 1.8.0).
So, enable gl_drm only when wayland support is selected.
[1] 4f04be1659
[2] https://www.enlightenment.org/about-wayland
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pierre Floury <devpfl@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
drm can be used without compositor, just like it was with
the framebuffer for standalone applications
As stated in configure.ac, libdrm support needs libdrm, elput,
libxkbcommon and libgbm.
libgbm is only provided by mesa3d package when OpenGL EGL support is
enabled, so add a direct dependency on mesa3d.
Rework the libxkbcommon dependency since it's now required for
elput and libdrm support.
[1] https://www.enlightenment.org/about-wayland
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Pierre Floury <devpfl@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass on INSTALL_PROGRAM to configure since starting with version 8.26
when building natively it tries to use the self-built install to
install, and when cross-compiling it expects INSTALL_PROGRAM to point to
a real install, or otherwise fails when recursively trying to expand it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add new GPLv2 license option.
Unfortunately COPYING is GPLv3, so avoid it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since these are detected by the configure script, we should explicit
their dependencies in rpm.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds two patches to the rpm package to fix two separate but
related build issues:
- The first patch fixes a build that occurs when rpm is built after
elfutils, but without binutils. In this case, dwarf.h is present, so
rpm enables the build of a number of additional tools. But one of
them uses bfd.h, provided by binutils, without checking for its
existence. So the first patch fixes that by checking for bfd.h
existence before enabling the tool.
Fixes:
http://autobuild.buildroot.net/results/810/810e24cab65f67d143da29c78c0f89d37a851cd7/build-end.log
- The second patch fixes a build issue that occurs when rpm is built
after both dwarf and binutils. In this case, bfd.h complains because
config.h is not included. That's a weird and silly issue in bfd.h
that the binutils developers don't want to fix, and you have to
define PACKAGE or PACKAGE_VERSION before including bfd.h to use it
outside of binutils.
Fixes:
http://autobuild.buildroot.net/results/362/362502f89631c9ba1d71906527674657ccff01ed/build-end.log
Thanks a lot to James Knight <james.knight@rockwellcollins.com> for the
initial investigation about the first issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd-firstboot is never invoked since systemd's first boot detection
logic checks whether /etc/machine-id exists. Since the file is created
automatically by systemd.mk, systemd will never detect first boot and
therefore the systemd-firstboot.service unit file will never get run.
Additionally, if /etc/machine-id is removed to allow systemd-firstboot
to run, it interactively prompts for the system locale. This makes it
seem unlikely that an embedded system would want to use it.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A number of packages use BR2_ARM_CPU_HAS_NEON to know if the target handles
aarch32 neon instructions, which is only true for ARMv8 cores when they are
running in 32bit mode.
Notice: These cores do support neon-like instructions using a different
encoding in 64bit mode (it is a required part of ARMv8, similar to the FPU).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After commit 3ae07b4746 recently, efibootmgr now selects
BR2_PACKAGE_GETTEXT if the toolchain requires it.
gettext depends on wchar, so this dependency should be propagated as
well.
menuconfig currently complains loudly if you select efibootmgr, with an
error such as:
warning: (... && BR2_PACKAGE_EFIBOOTMGR ... && ) selects
BR2_PACKAGE_GETTEXT which has unmet direct dependencies
(BR2_USE_WCHAR)
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar only makes sense on platforms that support UEFI.
UEFI is only supported by some architectures at the moment, being mostly
employed on platforms such as x86, x86_64 and aarch64. Some other
platforms such as MIPS and PowerPC may have some unofficial UEFI
support. UEFI is also limited to little endian architectures.
efivar was being supported in Buildroot without architecture
restrictions so far, however this has led to the creation of a number of
hacks in the recipes, mostly for architectures that are not supported by
UEFI.
In order to avoid spending more time to debug these failures and
maintaining more hacks for unsupported architectures, efivar can be
restricted to that platforms where it makes sense and where it is more
likely to receive some testing and actual usage.
The existing hacks for the now unsupported architectures are removed,
and the dependency is propagated to efibootmgr as it depends on efivar.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc support was recently added to efivar through a small
compatibility patch.
This commit updates a comment in the efivar recipe to reflect this, as
we no longer have glibc as the only supported C library.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix kernel reproducible build if a non-C locale is used on the host
system.
When building the Linux kernel, scripts/gen_initramfs_list.sh does 'date
-d"$KBUILD_BUILD_TIMESTAMP" +%s'. In linux.mk, Buildroot sets
KBUILD_BUILD_TIMESTAMP to "$(shell date -d @$(SOURCE_DATE_EPOCH))".
For example, if LANG=fr_FR.UTF-8 is defined in the host system, it does
not work:
- LC_ALL=C date -d"$(LC_ALL=C date)" : ok
- LC_ALL=C date -d"$(LC_ALL=fr_FR.UTF-8 date)" : error
LANG/LC_ALL variables exported in the main Makefiles are not passed in
the $(shell ...) sub-shells.
Signed-off-by: Jean-Baptiste Trédez <jean-baptiste.tredez@basystemes.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A recent change in uClibc-ng removed the MADV_* definitions for
madvise(), but kept the madvise() function itself. This defeats the
logic used in madplay: it checks if madvise() is available, and if it
is, uses it and assumes the MADV_* definitions exist.
This inconsistency has been reported to upstream uClibc-ng, but in the
mean time, we can simply tell madplay to not use madvise(), which is
anyway useless on noMMU platforms.
Fixes:
http://autobuild.buildroot.net/results/3291554ea013e5f4a8f3447e10e664dffa8b131b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot references powerpc64 little endian as BR2_powerpc64le and not
BR2_powerpc64el.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: A53/A57 were in fact supported in aarch64 mode in 4.8 (in aarch32
mode only from 4.9), but it doesn't handle --with-abi, and as there is
unlikely to be any aarch64 based legacy projects unwilling to use a newer
GCC version it is simpler to disallow it for all modes.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit f71a621d91, we are using the
SED variable in the main Makefile. However, this variable is only
defined in package/Makefile.in, which gets included only when a
configuration is defined.
This means that, if you do:
$ make menuconfig savedefconfig
without a configuration defined, it fails with:
/bin/bash: /BR2_DEFCONFIG=/d: No such file or directory
Makefile:898: recipe for target 'savedefconfig' failed
make[1]: *** [savedefconfig] Error 127
This issue affects users of the "buildroot-submodule" project, which
does menuconfig+savedefconfig automatically. They worked around this
issue in commit
d12676b608,
but really "make menuconfig savedefconfig" should work out of the box.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has dropped SDL support for ffplay in favor of SDL2.
This results in silently not building ffplay even if it is selected
in Buildroot config.
[Peter: propagate !static dependency from sdl2]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package currently installs the "rpiboot" utility, which is
needed to access via USB mass storage the built-in eMMC of Raspberry Pi
compute modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tom privately notified that he is not able to support the packages he
originally added in Buildroot, so this commit removes him from the
DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linaro toolchains are currently only available on ARMv7-A, but can
in fact also be used to generate 32 bits code for ARMv8 platforms. This
commit therefore adjusts their architecture dependency.
Example, a 32 bits ARM build produces a 32 bits busybox binary:
$ file output/target/bin/busybox
output/target/bin/busybox: setuid ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=16a7a70eb9cac08759e52a260478b9c287f59238, stripped
Which was built for Cortex-A72:
$ ./output/host/usr/bin/arm-linux-gnueabihf-readelf -A output/target/bin/busybox
Attribute Section: aeabi
File Attributes
Tag_CPU_name: "Cortex-A72"
Tag_CPU_arch: v8
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_FP_arch: FP for ARMv8
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_align_preserved: 8-byte, except leaf SP
Tag_ABI_enum_size: int
Tag_ABI_VFP_args: VFP registers
Tag_CPU_unaligned_access: v6
Tag_MPextension_use: Allowed
Tag_Virtualization_use: TrustZone and Virtualization Extensions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the Cortex-A53 CPU to the target architecture variant choice. This
sets the toolchain to use Cortex-A53 as the target. The effect is that
various Cortex-A53 tunings are enabled for the compilation of packages.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's currently only one widely supported ABI for ARM64, called lp64,
so we define BR2_GCC_TARGET_ABI to the appropriate value.
Note that there is another ABI for ARM64 being worked on, ilp32, but its
support is not fully upstream in the kernel, so we're not adding support
for it for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARMv8 cores have a mandatory FPU unit called FP-ARMv8, so we:
- add a new hidden Config.in option for the availability of this
unit (BR2_ARM_CPU_HAS_FP_ARMV8)
- allow the selection of a possible choice in the "Floating point
strategy", and add two new choices: BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8.
- specify the -mfpu values for BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8 cases, when used on ARM 32 bits (-mfpu
doesn't exist on ARM64, instead -mcpu modifiers are used, so they
will be added on a per-core basis).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: drop the FP strategy dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The floating point strategy currently depends on EABI || EABIHF. The
reason was that, wayback when we also supported OABI, we only exposed FP
for EABI or EABIHF, and hide it for OABI, which did not support FP.
It's been a while now that we do not support OABI, but the dependency
stuck all along.
Remove it as it is no longer needed, and is always true.
However, the choice is empty for AArch64, as we still have no entry for
their floating point strategy yet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now the "Target Architecture Variant" choice was not visible on
AArch64. In order to prepare the addition of the 64 bits core to this
choice, this commit adds a "depends on !BR2_ARCH_IS_64" dependency to
all currently supported cores (that are 32 bits only).
Following this commit, the "Target Architecture Variant" choice appears
on AArch64, but is for now empty.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 64 bits ARM processors are capable of running 32 bits ARM code, and
some platforms are indeed using this capability. Due to this, if we were
to keep the separation between Config.in.aarch64 and Config.in.arm, we
would have to duplicate the definition of all 64-bits capable ARM cores
into both files.
Instead of going down this route, let's take the same route as the x86
one: a single Config.in.x86 file, used for both x86 32 bits and x86 64
bits, with the appropriate logic to only show the relevant cores
depending on which architecture is selected.
In order to do this, we:
- Make the "ARM instruction set" choice only visible on ARM 32 bits,
since we currently don't support ARM vs. Thumb on AArch64.
- Add the relevant values for the BR2_ARCH option.
- Add the relevant values for the BR2_ENDIAN option.
- Make the "aapcs-linux" BR2_GCC_TARGET_ABI value only used on ARM 32
bits, since this ABI doesn't mean anything on AArch64.
- Make the BR2_GCC_TARGET_FPU option depends on ARM 32 bits, since
there is no -mfpu option on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current VIM_REMOVE_DOCS hook removes all .txt files from
/usr/share/vim. Unfortunately, this also removes the rgb.txt file,
which is needed at runtime for vim, as reported in bug #9466.
This commit changes VIM_REMOVE_DOCS to remove only
/usr/share/vim/vim*/doc/. Size-wise, it's equivalent because:
- We are no longer removing a few README.txt in other directories,
taking more space.
- We are now removing the /usr/share/vim/vim*/doc/ folder entirely,
which contained a few files not named *.txt
So overall, the size of /usr/share/vim/ before and after this patch is
still 11MB.
Fixes bug #9466.
Reported-by: Mateusz Furdyna <sir.ferdek@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many (100+) packages supported by buildroot contain old configure
scripts (or build them from old versions of autotools) that are unable
to determine how to link shared libraries on powerpc64 and
powerpc64le. This causes that test to erroneously fail on toolchains
that are not "bi-endian" (which is the case for toolchains built by
buildroot), which causes configure to build static libraries instead
of dynamic ones. Although these builds succeed, they tend to cause
linker failures in binaries later linked against them.
Because affected configure files can be discovered automatically, this
patch introduces a hook (enabled only when building for powerpc64 and
powerpc64le) that uses a script to scan and fix each package.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dev->trans_start was replaced by netif_trans_update helper in kernel
4.7 by commit 860e9538a9482bb84589f7d0718a7e6d0a944d58.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Rebase existing patches
- Use a "menu" instead of "choice" to select Ethernet Powerlink
Drivers since we can now build several kernel modules at once.
- Select the Intel 82573 driver by default.
- Disable library with simulation interface.
- Disable zynq/FPGA (PCIe) interface otherwise the kernelpcp library
is always build.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: minor Config.in tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same thing was done in upstream commit 220d7a2f "QtGui module only
needed by Windows", though it was done differently upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the logic that allows to enable the naxsi external
module below the "external modules" comment, which was already used for
the upload and dav-ext modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nginx built-in support for webdav is missing support for two commands:
PROPFIND and OPTIONS. This commit adds a new package that provides an
external nginx module with improved webdav support.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas:
- Remove the BR2_PACKAGE_NGINX_HTTP_DAV_EXT_MODULE sub-option of the
nginx package. The BR2_PACKAGE_NGINX_DAV_EXT option is sufficient.
- Move the nginx.mk code together with another external module being
enabled, nginx-upload.
- Add LICENSE and LICENSE_FILES variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TI provides a set of headers files and libraries useful in developing
firmware for real-time (PRU) cores embedded in some processors e.g.
AM3358. This package stages these files for any packages creating
PRU firmware.
Note: As per [1], use commit v4.0.2 to sync with common TI Linux
versions.
[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/p/552190/2018113#2018113
Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
[Thomas:
- rename BR2_PACKAGE_PRU_EXAMPLES to BR2_PACKAGE_PRU_SOFTWARE_SUPPORT,
since the package directory name should match the Config.in option
for this package
- use select for BR2_PACKAGE_HOST_TI_CGT_PRU, and therefore add the
appropriate "depends on BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Aubio libav support require libavcodec, libavformat, libavutil and
libavresample. Enable libav support only when
BR2_PACKAGE_FFMPEG_AVRESAMPLE is set.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a major update in cjson:
- project site moved from sourceforge to github
- project recommends to use the new cmake buildsystem instead of the
legacy make
- BR2_STATIC_LIBS is now OK (README does not mention issue anymore)
- As include path and library name have changed, tinycbor has to be
updated
- As cjson can now be built as a static library, fix a bug in
json2cbor compilation from tinycbor package
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we require a host with an UTF-8 locale as soone as we build a
Buildroot toolchain with support for locales. This means that we do
erquire such a locale when building a toolchain with either uClibc,
glibc or musl.
However, glibc and musl do not require such a locale to be present.
Use the new option to check if an UTF8 locale is needed on the host,
rather than deriving that from toolchain settings.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be selected when we need the host to have an UTF-8 locale
(e.g. to build uClibc with support for locales).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The test suite is removed from the package and is already a separate
package in buildroot. All patches are upstream, so remove them.
The UCLIBC_HAS_LFS option is removed upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: remove BR2_UCLIBC_INSTALL_TEST_SUITE option, add it to
Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Efl libraries bundle a copy of liblz4 which is also provided by
lz4 Buildroot package. Switch to liblz4 from lz4 package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 5b0dac7ef5, when bumping to
lttng-babeltrace, one patch was kept while it had been applied in the
upstream babeltrace project, causing a build failure.
The patch 0003-fix-uuid-support-detection-on-static-build.patch has been
applied upstream as 2741f55be80ae8af169ae795ea28d2a39c18fa60 in the
master branch, and as d94e7873e9080e820e7742e468736b1317a88de1 in the
maintenance branch that was used to tag 1.5.0.
Fixes:
http://autobuild.buildroot.net/results/585f960eb81b0e15858aadc4aca516af23012b61/
(and about a hundred of similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we bumped CMake from 3.5.2 to 3.6.3 in commit
99ed85d740, CMake uses pkg-config during
its configure step to find available libraries on the host.
If host-pkgconf was not built before host-cmake, everything was working
fine. However, if host-pkgconf was built before, the configure step of
host-cmake was finding pkg-config and used it to find
libraries. Unfortunately, since we were not passing
PKG_CONFIG_PATH/PKG_CONFIG_SYSROOT_DIR, pkg-config was behaving in its
"default" mode, i.e returning results valid when building things for the
target, not for the host. This lead to header paths pointing to the
staging directory being used when building native binary objects,
causing all sort of build failures.
This commit fixes that by passing $(HOST_CONFIGURE_OPTS) to the
environment of host-cmake configure step. This variable contains
HOST_MAKE_ENV, which itself contains the appropriate
PKG_CONFIG_PATH/PKG_CONFIG_SYSROOT_DIR definitions.
At the same time, we drop LDFLAGS="$(HOST_LDFLAGS)" because this
definition is already in $(HOST_CONFIGURE_OPTS).
Fixes:
http://autobuild.buildroot.net/results/4e703ed8c2eb0f914794038b0ef7bd73a67f38ce/
(and 424 similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new waf-package infrastructure simplifies writing waf-based
packages. It can be used by our six current such packages, plus a
later-incoming one by Romain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rename <pkg>_BUNDLED_WAF to <pkg>_NEEDS_EXTERNAL_WAF, which
involves inverting the meaning of the boolean.
- always add the host-python dependency
- add a default value for <pkg>_NEEDS_EXTERNAL_WAF (defaults to NO)
- remove the unneeded <pkg>_MAKE related definitions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-waf will be used by waf-based packages that do not include it in
their release tarballs, like mpv.
mpv is currently the only case we have, but with the upcoming
waf-package infra, having host-waf available just makes the infra
complete from the onset.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: drop dependency on host-python, it's really a runtime dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change "foo" references to "libfoo" in section that defines variables
explicitly stated to relate to a "libfoo" package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-rc2.
This change contains a set of minor fixes and updates.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_STRIP is set to none, a dummy 'true' app is used instead of
strip utility. However, kexec package always requires a real strip
executable as it is used to generate intermediate files during the build
process.
If 'true' is used the build system runs the following command:
true --strip-debug -o purgatory/purgatory.ro purgatory/purgatory.ro.sym
which obviously doesn't do anything useful and the build later fails
with:
bin/bin-to-hex purgatory < purgatory/purgatory.ro > kexec/purgatory.c
/bin/sh: purgatory/purgatory.ro: No such file or directory
kexec/Makefile:7: recipe for target 'kexec/purgatory.c' failed
make[2]: *** [kexec/purgatory.c] Error 1
To resolve it always specify STRIP=$(CROSS_COMPILE)strip, regardless of
buildroot configuration.
[Peter: add a comment explaining why this is done]
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a sha256 hash since upstream only provides one weak hash.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
My local 'next' branch was not uptodate, so the previous merge was missing
the most recent changes.
Thanks to François Perrad for noticing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 0.12.3 bump forgot to update the download hash and remove the now
upstreamed patch, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 71d9b0c1f0.
Now that -mauto-litpools is in TARGET_ABI when building for xtensa, -O0
builds succeed, so this workaround is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the madvise defines are disabled for noMMU targets,
architectures with MMU and noMMU support as ARM are failing to compile
in noMMU mode, since the defines are used internally in posix_madvise.c.
Disable compilation for posix_madvise() for noMMU.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When generating the environment image the target endianess should
be taken in account for CRC calculation purposes. For big endian
targets the -b flag should be passed to the mkenvimage tool.
Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed CVEs:
- CVE-2016-9387
- CVE-2016-9388
- CVE-2016-9389
- CVE-2016-9390
- CVE-2016-9391
- CVE-2016-9392
- CVE-2016-9393
- CVE-2016-9394
- CVE-2016-9395
- CVE-2016-9396
- CVE-2016-9397
- CVE-2016-9398
- CVE-2016-9399
- CVE-2016-9557
- CVE-2016-9560
Changes to jasper.mk:
- Switched site method to GitHub. 1.900.31 is not released as a tarball
in the official website.
- Autoreconf necessary since there isn't any configure script. We need
to generate it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport 2 patches from upstream (from 3.18-rc1) for gcc 5.x support and a
patch from Marco Franceschetti (https://github.com/vonfritz/kernel/) to fix
gcc 5.x compat issues in the bsp wifi drivers.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ntpq and ntpdc may depends on libedit and libcap.
$ arm-linux-readelf -d ./usr/bin/ntpdc | grep NEEDED
0x00000001 (NEEDED) Shared library: [libcap.so.2]
0x00000001 (NEEDED) Shared library: [libm.so.6]
0x00000001 (NEEDED) Shared library: [libedit.so.0]
0x00000001 (NEEDED) Shared library: [libncursesw.so.6]
0x00000001 (NEEDED) Shared library: [libssl.so.1.0.0]
0x00000001 (NEEDED) Shared library: [libcrypto.so.1.0.0]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libc.so.6]
However, build order with these libraries is not defined.
In order to keep things simple, we enforce build order even if ntpq/ntpdc are
not selected.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: use --without-lineeditlibs.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 173135df5b ("core: re-enter make if
$(CURDIR) or $(O) are not canonical paths") introduced the CANONICAL_O
variable, defined as:
CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
This duplicates the definition of BASE_DIR, by different means:
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
So one of these shell calls is redundant. CANONICAL_O is defined first,
so this commit replaces the BASE_DIR derivation with $(CANONICAL_O).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.11 brings commit 5f95e68daae397 ("clk: imx: fix integer overflow
in AV PLL round rate"), which fixes a PLL calculation bug, so bump to this
version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 8035ceb56c.
Moving to pseudo brought a number of issues (and longer compilation time),
so lets stick with fakeroot now that the reported ubi issue has been worked
around.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9386
GNU sed -i misbehaves on systems with SELinux enabled, as it tries to copy
to the SELinux security context (xattr) from the source file to to the new
destination file, which fails under fakeroot and leaves the file with 000
permissions, causing ubinize to fail when it cannot read to configuration
file.
So as a workaround, combine the install and tweak steps in a single
sed with a redirect to the destination file instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to QEMU to include the "tools" (configure option:
--enable-tools) in the target. This adds a dependency on pixman, but
that's already present.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 4.7 introduced the sync_8 builtin functions for ARM. For ARM < v7,
this requires calling into the kernel. However, the failure path of
that call reports an error with the __write() function, which is a
glibc internal function. Therefore, it fails to link with uClibc or
musl. This was fixed in gcc 5.2.0, by replacing the __write() with
a plain write().
For sync_8 itself we have solved this with the conditions on
BR2_TOOLCHAIN_ARM_HAS_SYNC_8. However, the same function is also used
for the implementation of atomics.
For the internal toolchain, we can fix this by backporting the patch
to 4.9.4 and 4.8.5.
Fixes:
http://autobuild.buildroot.net/results/1db64b4830f499621e44523e0ef68191505e2ce9
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Chrony has the ability to support PPS. Its enablement is determined
primarily from the existence of `sys/timepps.h`. This file is provided
from the pps-tools package. Adjusting Chrony's Makefile to depend on the
pps-tools package if a developer has included pps-tools as part of a
build. Relates to 2cfc966f43.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-python3 currently detect if there is an usable OpenSSL installation
and conditionnaly compiles the 'ssl', '_ssl' and '_hashlib' modules.
This may break compilation if the system's OpenSSL has been updated to
1.1.0 because of a bug in python, see https://bugs.python.org/issue26470
for details.
Unlike Python 2.7, Python 3 unconditionnaly compiles fallbacks for
common hash algorithm, so disabling OpenSSL will still leave Python 3
with implementations of common hash algorithm.
This adds a patch to configure.ac patch to implement a --disable-openssl
option.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain has many problems which are fixed in contemporary gcc
and uClibc-ng. In addition, several hacks are needed to be able to
work with this toolchain. All these hacks are removed as well. Also
the package exceptions for this toolchain are removed.
The BR2_BFIN_INSTALL_FDPIC_SHARED and BR2_BFIN_INSTALL_FLAT_SHARED
options don't get a legacy entry. For the ADI toolchain, there already
is a legacy entry, so it doesn't make sense to add it twice. For other
external toolchains, these options didn't actually work, because they
rely on the specific layout of the ADI toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently support gcc as old as 4.3. However, Buildroot works
perfectly well with even older gcc versions (tested with 4.1). So we
can add an option BR2_TOOLCHAIN_EXTERNAL_GCC_OLD to support that. The
help text of this option is written with plenty of discouragement.
We use _OLD and not something like _PRE_4_3, because at some point we
will likely remove the 4.3 option and what would then require a name
change.
We don't set any _AT_LEAST option in this case because it's no use -
there is no lower bound on the version in this case. We therefore leave
BR2_TOOLCHAIN_GCC_AT_LEAST empty (the implicit default). When it is
empty, we don't do a version check at all in check_gcc_version
(previously we errored out when it was empty).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MoarVM's Configure.pl script uses pkgconfig to find libraries and
headers, but it uses the one installed in the host machine which is
wrong and can lead to errors of unsafe include paths.
Instead, make it depend on the host-pkgconf package and specify the path
to our pkgconfig binary by using the --pkgconfig configure option.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream kexec-lite now has support for kexec on POWER9 based machines.
Update so this works in simulators and is ready for when real machines
are available.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this commit will init the display as early as possible so the user can
see on screen the boot process.
the displey init will be called after the logging init to provide some
logging of the init.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of creating our own .pc file with a patch, just tell qmake to
do it by adding create_pc to CONFIG.
This corrects the .pc file for Qt5. Previously, the include directory
was set to /usr/include, while for Qt5 it should be /usr/include/qt5.
This hasn't caused any autobuild failures since no other package uses
qextserialport.
Note, however, that the package is now called Qt5ExtSerialPort in Qt5,
while before it was qextserialport like in the Qt4 case.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Compact casesi patterns don't have a reload version. This causes build
failures of "trousers" package for ARC.
Current patch disables compact casesi patterns for ARCv1 (750D and 770D)
via passing "-mno-compact-casesi" option when compiling "trousers".
This change is a temporary workaround and the feature is going to be
fixed in the next ARC toolchain release version.
Fixes:
http://autobuild.buildroot.org/results/d2c/d2c16d8ba022b070c4dbeba5e7ea41f14d706691//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The distclean target no longer removes the "output" directory for
in-tree builds, because $(O) is no longer just "output" in that
case. Change the test to be against "$(CURDIR)/output", to match
the O setting, and a similar test elsewhere in the same Makefile.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make may throw an error (but ignored) trace when cleaning up the
rootfs.
The target-finalize rule intends to remove the folder
`$(TARGET_DIR)/usr/share' but this directory may still contain items
(such as the `udhcpc' helper script) and causes the rmdir to fail.
The stderr output is redirected to /dev/null but it returns and error
which is escaped by the leading `-'; but make reports an ignored-error.
See the log below:
$ make
(...)
rm -rf (...)/target/usr/share/gtk-doc
rmdir (...)/target/usr/share
rmdir: failed to remove '(...)/target/usr/share': Directory not empty
make[1]: [Makefile:650: target-finalize] Error 1 (ignored)
find /(...)/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 (...)/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
This patch apply the same rule at the instruction immediately after:
* redirecting stderr to /dev/null (already done) and
* executing true if the `rmdir' instruction fails.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems with the change to gcc 6.x based toolchain this
workaround is no longer required. Tested with an arc hs toolchain.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The makedevs package is a fork of the makedevs tool from busybox. It is
part of the Buildroot infrastructure, not something that should be used
on the target. It something like this is needed on the target, upstream
busybox should be used. And if one of the Buildroot-specific features
is needed, then that feature should be upstreamed to busybox.
Besides, there were already two things wrong with the target package:
- it didn't take into account the overlap with busybox (no depends on
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS, no dependency on busybox);
- it didn't take into account the libcap feature.
The target package was introduced more or less accidentally in 81cd9d45
where the intention was to make it more similar to other packages.
So, kill it with fire.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a space before and after the equal sign when defining the TZ, LANG
and LC_ALL variables, as suggested by the Buildroot coding style.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure all files in $TARGET_DIR have a defined modification time
before to generate filesystems.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux kernel include a few information about build environment in its binary.
This feature is incompatible with BR2_REPRODUCIBLE. This patch overload build
information when BR2_REPRODUCIBLE is enabled.
Note that usage of KBUILD_BUILD_TIMESTAMP is not mandatory since Buildroot
use `fakedate'. However, native solution is prefered when upstream
provide one.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to make tar images reproducible, force files order in tarball.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default invocation to gzip include timestamp in output file. This feature is
incompatible with BR2_REPRODUCIBLE. It is possible to disable it with '-n'.
The environment variable GZIP can hold a set of default options for gzip. So
instead to find all gzip invocation in build process, we just export 'GZIP=-n'.
Notice bzip2, lzma and xz are not impacted by this problem. On the other hand, lzop
does include timestamp and does not provide any way to disable it.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When reproducibility is requested, generate a global SOURCE_DATE_EPOCH
environment variable which contains either the date of Buildroot last
commit if running from a git repository, or the latest release date.
This means that all packages embedding build dates will appear to
have the same build date, so in case of new commit or release, all
packages will appear to have been changed, even though some of them
may not have changed in fact.
The meaning of SOURCE_DATE_EPOCH is specified by the following
specification:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago toolchains are no longer maintained and haven't been updated
for a long time.
With this removal, all the legacy toolchain-external support can be
removed as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Synopsys external toolchain for
the ARC architecture.
The legacy implementation is removed.
Note that this toolchain is marked as BROKEN, but 2016.09 seems about
to be released so maybe it will be unbroken soon.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AMD-64 architecture.
The legacy implementation is removed.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external-package infrastructure is just a copy of the
toolchain-external commands, replacing TOOLCHAIN_EXTERNAL by $(2)
and adding double-dollars everywhere.
toolchain-external itself is converted to a virtual package, but it
is faked a little to make sue the toolchains that haven't been
converted to toolchain-external-package yet keep on working.
The TOOLCHAIN_EXTERNAL_MOVE commands don't have to be redefined
for every toolchain-external-package instance, so that is moved
out into the common part of pkg-toolchain-external.mk.
The musl-compat-headers dependency stays in the toolchain-external
package itself.
The musl ld link is duplicated in the legacy toolchain-external and
the toolchain-external-package, because they have separate hooks.
The handling of TOOLCHAIN_EXTERNAL_BIN deserves some special attention,
because its value will be different for different
toolchain-external-package instances. However, the value only depends
on variables that are set by Kconfig (BR2_TOOLCHAIN_EXTERNAL_PREFIX
and BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD) so it can easily be used in
the generic part. So we don't have to do anything specific for this
variable after all.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-toolchain-external.mk will be used later to define the
toolchain-external-package infra. Most of the variable and macro
definitions are shared with the legacy generic-package based
toolchain-external. Move these to pkg-toolchain-external.mk.
pkg-toolchain-external.mk is included implicitly by the include
toolchain/*/*.mk in the top-level Makefile. The order of inclusion is
not defined, but that doesn't matter because none of the variables
defined in pkg-toolchain-external.mk are used in conditions or in
rules in toolchain-external.mk, only in recursively-expanded
variables.
No functional changes at all. The output of 'make -qp' hasn't changed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the toolchain-external logic will be split into separate packages,
the order in which things are defined in toolchain-external.mk no
makes less sense. So reorder things in a more logical fashion.
Also add a few more comments to the different sections.
No functional changes at all. The output of 'make -qp' hasn't changed,
except for the order of arguments in
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch, slightly change some comments,
reordered some parts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gr-fec needs gsl. Without this dependency cmake search gsl in the host system.
This issue produce errors like :
arm-buildroot-linux-uclibcgnueabihf-gcc: ERROR: unsafe header/library path used
in cross-compilation: '-I/usr/include'
make[3]: *** [gr-fec/lib/CMakeFiles/gnuradio-fec.dir/reed-solomon/encode_rs.c.o] Error 1
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RHEL 5.x does have magic.h, but it does not define all expected symbols.
In particular, the NO_CHECK symbols were only added in file 4.20 and RHEL
5.x is using 4.17. Don't use magic.h and libmagic when building host
package.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The next release of uClibc-ng (1.0.20) will remove the test suite.
Add a separate package before the next release.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, qextserialport will attempt to build a shared library.
qesp_static has to be set in CONFIG to build static. Note that
static+shared is not supported, in that case we just build shared.
The install target commands also have to be gated in that case,
because the *.so files don't exist. For completeness we both set
QEXTSERIALPORT_INSTALL_STAGING to NO and don't define
QEXTSERIALPORT_INSTALL_TARGET_CMDS for static builds, although one
of them would be sufficient.
Fixes:
http://autobuild.buildroot.net/results/c9233ad71fd60d0e6a85731a8bd4e598bd84947a
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qmake hardcodes the path to the sysroot in the install commands, so
we can't use it for target. But it's perfectly usable for staging.
By using 'make install', we get:
- the extserialport.prf file is installed to the mkspecs directory and
libqextserialport.prl in staging/usr/lib, so qmake can do its magic
and add the necessary compiler options;
- it also works for static build, when *.so files don't exist.
The QExtSerialPort and qextserialport.pc files are created by
Buildroot so they still have to be installed explicitly. Note that
upstream installs in the QtExtSerialPort directory, not QExtSerialPort,
so we follow that decision.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: also adjust 0003-pkgconfig.patch to fix the header path.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Distinguish qt/qt5 by defining QEXTSERIALPORT_QMAKE, like is done e.g.
for quazip.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.8.8 brings commit 235bde1ed3f0ff ("net: fec: Call swap_buffer()
prior to IP header alignment"), which makes Ethernet functional again
on mx28.
Bump to this version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The wscript checks the following.
'func': check_libs(['atomic'],
check_statement('stdint.h',
'int64_t test = 0;'
'test = __atomic_add_fetch(&test, 1, __ATOMIC_SEQ_CST)')),
and
'func': check_statement('stdint.h',
'int64_t test = 0;'
'__typeof__(test) x = ({int a = 1; a;});'
'test = __sync_add_and_fetch(&test, 1)'),
It fails if neither of these are available.
Fixes
http://autobuild.buildroot.net/results/8c20f719f784af1312294600e39004c1d382368a
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mplayer uses a homegrown configure script that calls 'gcc -v | tail -1'
to find the gcc version. However, our toolchain wrapper adds
-Wl,-elf2flt to the gcc arguments. This triggers gcc to do an actual
compile (rather than just printing version info and exiting), and that
compile fails because of the missing definition of main(). The last
line of the output is therefore:
collect2: error: ld returned 1 exit status
and configure doesn't find a version in there. It then falls back to
using the host gcc instead, which breaks things completely a bit
further down the line.
Since mplayer probably isn't very useful on noMMU architectures anyway,
just disable it completely for FLAT.
Fixes:
http://autobuild.buildroot.net/results/58cf28a3acd518633a1d8ea719bc70aefbdfb311
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xapp_xload tries to include protocols/rwhod.h, which isn't available on
musl. Fortunately, the package also has stub code that can be enabled
with -DRLOADSTUB (this is done e.g. on Cygwin).
This should probably be detected in configure, but that's a lot more
work.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the commit 6dd7bbb591, the label does
not need anymore to be quoted. Even worse it *must* not be simple-quoted,
unless the label will contain the double-quotes from the config variable
BR2_TARGET_ROOTFS_EXT2_LABEL.
The commit mentionned above has replaced echo by printf:
- echo "$$(ROOTFS_$(2)_CMD)" >> $$(FAKEROOT_SCRIPT)
+ $$(call PRINTF,$$(ROOTFS_$(2)_CMD)) >> $$(FAKEROOT_SCRIPT)
Since this commit the rootfs label contains extra double-quotes.
$ blkid
/dev/mmcblk0: LABEL=""BR 2016.08"" UUID="xxx"
^ ^
With this fix, the extra double-quotes have disappeared:
/dev/mmcblk0: LABEL="BR 2016.11-rc2" UUID="yyy"
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_EXTERNAL documentation improperly tells to use the
BR2_EXTERNAL_<name>_DIR variable to reference the location of the
BR2_EXTERNAL directory. But in fact the variable is named
BR2_EXTERNAL_<name>_PATH.
In addition, some closing double quotes were missing.
This commit fixes both of those issues.
Signed-off-by: Jerry Evans <g4@novadsp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The library uses the hypervisor instruction HVC, which is only
available on ARMv7-A with Hypervisor extensions. This is limited to
Cortex-A{7,12,15,17}.
In addition the build unconditionally passes -marm so it also needs
ARM instructions to be available, but that is already implied by the
CPU selection.
Implicitly fixes
http://autobuild.buildroot.net/results/53d109fd9055fd20387bb857aced5f89cf3086fd
though it is still not clear why ld doesn't accept the -Ttext=...
option there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: A12 and A17 also have the virtualization extensions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script uses this to set the -mcpu option. If nothing is
passed, it defaults to -mcpu=cortex-a15 for arm, and -mcpu=cortex-a57
for aarch64, which may conflict with the actual architecture.
The --processor option is only really used for arm and aarch64, but it
doesn't hurt to also pass it for the other arches.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* The first patch is removed because the input-raw plugin is now enabled
in tslib's provided ts.conf
* The second patch added 2 programs to tslib. The whole patch is removed
because:
- ts_finddev is now part of tslib.
- inputattach is part of the 'Linux console project' located
here: https://sourceforge.net/projects/linuxconsole/
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously the vdk solution was using a Linaro kernel that doesn't
build with gcc 5.x.
Since there is no point in using Linaro anymore for this solution,
this patch makes the aarch64 vdk defconfig point to the 4.6 Linux
kernel.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit a167081c5d.
With the applied musl/kernel headers conflict workaround this upstream nacked
patch is no longer necessary.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rick Felker suggested[1] this hack as a workaround to musl libc conflict with
kernel headers:
The problem is linux/libc-compat.h, which should fix this, only works
on glibc, by design. See:
#ifndef _LIBC_COMPAT_H
#define _LIBC_COMPAT_H
/* We have included glibc headers... */
#if defined(__GLIBC__)
/* Coordinate with glibc netinet/in.h header. */
#if defined(_NETINET_IN_H)
If you patch it like this:
-#if defined(__GLIBC__)
+#if 1
then it should mostly work but it's still all a big hack. I think
that's what distros are doing. The problem is that the same header is
trying to do two different things:
1. Provide extra linux-kernel-API stuff that's not in the
libc/userspace headers.
2. Provide definitions of the standard types and constants for uClibc
and klibc, which don't have complete libc headers and rely on the
kernel headers for definitions.
These two uses really should be separated out into separate headers so
that the latter only get included explicitly by uClibc and klibc and
otherwise remain completely unused. But that would require coordinated
changes/upgrades which are unlikely to happen. :(
Upstream musl still evaluates[2][3] a permanent solution.
With this in place we can revert (at least) commits a167081c5d (bridge-utils:
fix build with musl) and e74d4fc493 (norm: add patch to fix musl build).
[1] http://www.openwall.com/lists/musl/2015/10/08/2
[2] http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258
[3] http://www.openwall.com/lists/musl/2016/11/09/2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previous version patches are still needed, but they have been
upgraded to apply cleanly.
This also reverts aa9fde1c45, as that
patch is already on upstream.
Signed-off-by: Alvaro Gamez <alvaro.gamez@hazent.com>
[Thomas: fix the AR/RANLIB problem by adding another patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xenomai user space tools fail to build for bfin target since it's
provide it's own pthread_atfork(), shm_open() and shm_unlink()
definition using the inline keyword and weak attribute.
With gcc 5+ the weak attribute is discarded by the inline keyword,
so each symbol are global and are redefined several time while
linking.
Fixes:
http://autobuild.buildroot.net/results/0c2/0c2e5eb4edd4f9427f61d3c9b67a12a7a0e24140
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add reference to upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb arc-2016.09-rc1 is based on upstream 7.12 gdb version where we can
still disable C++ build. For more information take a look at:
https://sourceware.org/gdb/wiki/cxx-conversion
We wanted to build gdb with C++ as it is used as default in 7.12
and is even a mandatory requirement since 2016/09.
But unfortunately we missed one runtime failure that C++ build causes
and so now we have to disable C++ build.
When gdb arc-2016.09-rc1 is built as a C++ application it segfaults at
runtime for ARC.
We are going to fix the issue in 2017.03 ARC toolchain release. and
before this we remove C++ dependency are adding temporary workaround
to prevent runtime segfaults.
The workaround is to disable building gdb as C++ application via
passing --disable-build-with-cxx config option when building gdb for
ARC.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently some buildroot targets fails (list-defconfigs,
graph-build, etc), if there is an issue with configuration.
For example, enabling uboot package without providing custom
version name results in failing of various targets.
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: as suggested by Arnout, added printvars and savedefconfig to
nobuild_targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avoid duplicated struct fbdev_window definition (introduced by [1]) by
renaming struct fbdev_window to shadow_fbdev_window.
Fixes [2]:
qeglfsmaliintegration.cpp:45:8: error: redefinition of 'struct fbdev_window'
struct fbdev_window {
^
In file included from /accts/mlweber1/rc-buildroot-test/scripts/instance-0/output/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/EGL/eglplatform.h:28:0,
from /accts/mlweber1/rc-buildroot-test/scripts/instance-0/output/host/usr/aarch64-buildroot-linux-gnu/sysroot/usr/include/EGL/egl.h:36,
from ../../../eglfs/qeglfsglobal.h:45,
from ../../../eglfs/qeglfsdeviceintegration.h:48,
from qeglfsmaliintegration.h:37,
from qeglfsmaliintegration.cpp:34:
[1] https://code.qt.io/cgit/qt/qtbase.git/commit/?h=dev&id=58bed4cda98e8e25db8adc61c7db73b6853077dc
[2] http://autobuild.buildroot.net/results/48c/48c458c035162169e8ca7c34ae65e9064822f25a
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
netsniff-ng allows build with musl since version 0.5.8. With libnet
now being able to build with musl, let's enable musl for netsniff-ng
as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: update Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to a patch taken from upstream
(ffd7fab744),
we can enable the libnet package on musl toolchain.
Adjusted the file paths manually so the patch applies to the packaged
libnet sources.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: allow the package to be selected with the musl C library.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of dtv-scan-tables to version
ceb11833b35f05813b1f0397a60e0f3b99430aab in commit
b1c8794d8a, one file contains non-ASCII
characters, which causes encoding issues tvheadend. Since no other
file in the dtv-scan-tables code base contains files with non-ASCII
characters (despite having files named after cities in various
countries that definitely do have non-ASCII characters), we rename
this file so that it is named with only ASCII characters.
This fixes the build of tvheadend, which was failing when the host
Python interpreter was python3, due to a file name encoding issue.
Fixes:
http://autobuild.buildroot.net/results/1ae8bee297edb089535a2fb6ec724ebf7976888d/
(tvheadend)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we upgrade U-Boot version to 2016.11 in
"snps_axs101_defconfig" and "snps_axs103_defconfig".
Important fixes: new version fixes U-Boot build for arc700. Since
gcc-6.x "-marc700" option is no longer supported, "-mcpu=arc700"
should be used instead.
We haven't sent it before as we were waiting for U-Boot 2016.11
release.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
[Thomas: as reported by Alexey, this commit is in fact a bug fix: it
makes the defconfig work properly. Indeed, since the ARC compiler has
moved to gcc 6.x, the ABI has changed, and a Linux 4.8+ kernel is
needed for userspace to work on ARC.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We should include config.h from sanei_backend.h in order to use the
correct if/else HAVE_FOO.
For some reason with Glibc or uClibc there is no problem but with musl
we have the following weird issue:
In file included from epsonds.h:41:0,
from epsonds-jpeg.c:18:
../include/sane/sanei_backend.h:99:33: error: expected ';', identifier or '(' before 'int'
../include/sane/sanei_backend.h:99:33: warning: useless type name in empty declaration
That's because HAVE_SIGPROCMASK is not defined although it's correctly
detected by the configure script.
$ grep config.log
config.log:#define HAVE_SIGPROCMASK 1
So, include config.h to avoid to redefine sigset_t.
Fixes:
http://autobuild.buildroot.net/results/9f1/9f1f1cb727b5c5407e69172280a3dee880e55cdf
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When statically linking with gnutls, we get definition clash error for
base64_encode which is also defined by gnutls.
This commit adds patch to rename base64_{encode,decode} defined in wget.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building wget with openssl in static libs configuration, wget
build system fails detect openssl because it doesn't specify LD flags
for private libs used by openssl. This specifically happens when we
pass --with-libssl-prefix to configure which tries to find ssl using
custom flags. If we don't specify --with-libssl-prefix, it relies on
pkg-config files to detect ssl and it's LD flags which helps with static
linking.
This commit removes --with-libssl-prefix conf opts. Since this case is
similar to gnutls, we remove same conf opts for gnutls as well.
wget can be built with either gnutls or openssl crypto libraries, so
separate optional support for both is not required. This commit also
does minor optimization by checking for either gnutls or openssl while
at it.
Fixes:
http://autobuild.buildroot.net/results/c6a/c6abdff37b86471cf8b0ceffeff5472042923de0/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to the common genimage scripts, the uImage.imx23-olinuxino
file no longer exists.
Instead of updating the section, let's simply remove it as the more
standard method of using sdcard.img is already explained.
This also makes the readme more consistent with the other i.MX readme files.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to the common genimage scripts the generated file list
is a bit different, so adjust it accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-8693: Double free vulnerability in mem_close
CVE-2016-8692: Divide by zero in jpc_dec_process_siz
CVE-2016-8691: Divide by zero in jpc_dec_process_siz
CVE-2016-8690: Null pointer dereference in bmp_getdata triggered by crafted
BMP image
CVE-2016-2089: matrix rows_ NULL pointer dereference in jas_matrix_clip()
CVE-2016-8886: memory allocation failure in jas_malloc
CVE-2016-8887: Null pointer dereference in jp2_colr_destroy
CVE-2016-8884, CVE-2016-8885: Null pointer dereference in bmp_getdata
(incomplete fix for CVE-2016-8690)
CVE-2016-8880: Heap buffer overflow in jpc_dec_cp_setfromcox()
CVE-2016-8881: Heap buffer overflow in jpc_getuint16()
CVE-2016-8882: Null pointer access in jpc_pi_destroy
CVE-2016-8883: Assert in jpc_dec_tiledecode()
Drop upstream patches.
Change SITE to the official download location, since the current one does not
have the updated version. Unfortunately, the official site only offers tar.gz.
Fix license. It is "based on the MIT license", but not exactly the same
(http://www.ece.uvic.ca/~frodo/jasper/; under "Legal Issues").
Drop autoreconf; the autotools version has been updated since commit
324ccec90d (jasper: autoreconf to fix rpath issue) that introduced it.
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig was mistakenly removed by commit
78ac39cb89 due to an improper conflict
detection in "git am". This commit restores it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sama5d4ek defconfig has been removed in commit
9cb0b37cbd267ec1c2beea3deeaa86846bc2d037, but the board/atmel/readme.txt
file was not updated accordingly. This commit fixes that.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Atmel sama5d4ek board is no longer sold. Since there is the Xplained
board and we won't maintain anymore the EK board, the defconfig can be
removed. In addition, the defconfig was failing to build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to linux4sam_5.5 and remove dtb variants which are no longer
supported. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to a recent version of AT91bootstrap and use mainline version of
U-Boot and Linux. This is needed to fix the build with gcc 5.x.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
[Thomas: add missing BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_8=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Saves a little space and network bandwidth.
While at it, use PATCHELF_VERSION for PATCHELF_SITE.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have a wrapper that makes pseudo behaves like the fakeroot of the
good ol' days. So the symlink will just magically keep old scripts
working as they did before the switch to pseudo.
However, using fakeroot is deprecated, and we want people to stop using
it altogether and switch to pseudo.
So, make the wrapper recognise how it's called, and if called as
fakeroot, print a warning message.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Running pseudo is more involved than running fakeroot. In the transition
from using fakeroot, we just did not account for the extra requirements.
First, we explicitly tell pseudo where it is, otherwise it tries to
guess. Its guess is correct, but it prints a warning, which is not nice.
Second, we tell it where to find the passwd and group files in case it
has to emulate access to them. We currently do not use that feature, but
better safe than sorry.
Third, pseudo spawns a background daemon, and talks to it (when fakeroot
would emulate the state all in the current process' state, pseudo uses
the daemon to coordinate the state across multiple processes). We are
not much interested in the daemon lingering around, so we just tell it
to terminate as soon as the last clients quits (this can take up to one
second).
Fourth and last, pseudo always stores its internal database when
exiting, and reloads it when spawned. The database is by default stored
in a sub-directory of the prefix it was installed in, but this is
impractical for us. We want the database to be specific to the one
config dir we are building, so we store the database in a (hidden)
sub-dir of the build dir, thus ensuring it is never shared with another
build. That directory is hidden (starts with a dot) because we consider
that to be our internal state that we do not want to expose to the user.
The wrapper has to be relocatable, so we avoid using hard-coded paths
in there: we derive those paths fom the runtime path of pseudo. However,
the build directory $(BUILD_DIR) is not available in the environment
(we do not export it because it conflicts with some buildsystems).
Instead, we use $(BASE_DIR) which is exported.
Finally, when relocated, the wrapper would not be used in the Buildroot
environment, so may not have access to TARGET_DIR or BASE_DIR, unless
the user sets them. If he does not, we still want the wrapper to be
working (to avoid the warning about the prefix, and to exit the daemon
asap); thus we leave the passwd and localstatedir variable alone if we
don't have what it needs to set them, rather than set them to incorrect
values.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Cc: Patrick Keroulas <patrick.keroulas@savoirfairelinux.com>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Julien BOIBESSOT <julien.boibessot@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If 'lib' is a symlink (as is the case when BR2_ROOTFS_MERGED_USR=y),
'find lib' does not return the correct result. So, until now,
libpthread*.so* and ld-*.so* were not stripped when 'lib' was a symlink.
We fix this by using 'find lib/' instead of 'find lib'. For consistency
reason, we also do the same change for the 'find' that removes .a and
.la files.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: slightly improved the commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The snowball_defconfig has been removed one year ago in commit
b3fa8e24de ("configs: remove
calao_snowball_defconfig"), and it's no longer possible to buy
Snowball boards. Therefore, there is no reason to keep the
snowball-related packages in our tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Calao Systems company has gone bankrupt in April 2016, and the
domain name no longer exists, so there is no chance to ever contact
Gregory Hermant at a @calao-systems.com address, so let's remove his
entry from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The calao defconfigs no longer build with gcc 5.x, due to Linux kernel
versions used being too old. However, it is unlikely that anyone will
ever update them, since Calao Systems has gone bankrupt in April 2016.
Therefore, let's remove them. If anyone is interested again at some
point, it will be easy to revive them from the Git history.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TOOLCHAIN_EXTERNAL_PREFIX variable is already qstripped and
stored in the TOOLCHAIN_EXTERNAL_PREFIX variable in
toolchain-external.mk, so use this variable everywhere.
This will be useful for a later patch that makes the derivation of
TOOLCHAIN_EXTERNAL_PREFIX a little more complex.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
allow usage of amcodec if kodi is built and libamcodec is selected
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas: fix KODI_INCLUDES definition in RPi case, fix indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this toolchain, guile tigger an assembler error with -Os which is
probably caused by the binutils version being used:
arm-none-linux-gnueabi-ld --version
GNU ld (Sourcery CodeBench Lite 2014.05-29) 2.24.51.20140217
arm-none-linux-gnueabi-gcc --version
arm-none-linux-gnueabi-gcc (Sourcery CodeBench Lite 2014.05-29) 4.8.3 20140320 (prerelease)
Nowaday, even with a Buildroot internal toolchain using the oldest
Binutils GCC version (2.25.1 and 4.8.6), guile build fine with -Os.
So, force -O2 when this toolchain is used and BR2_OPTIMIZE_S is set.
Fixes:
http://autobuild.buildroot.net/results/976/976b3477407e64c8c2fc2309ed952d0083903a19
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A short list of new features:
- progress interface as general way to signalize the update
status outside of the process.
- support encrypted artifacts (encryption via simmetric keys)
- host verification for swu images (-c option)
- configuration file to configure the update process
- HAwkbit backend: API extended, support for configData messages
- Hawkbit backend: supports SSL certificates
- remote handler : general interface to connect external
installers.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for 256 colors is enabled in xterm and ncurses, but it was
forgotten for screen.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comments in the Buildroot-provided php-fpm.conf would produce the
following error when starting php-fpm:
ERROR: [/etc/php-fpm.conf:2] value is NULL for a ZEND_INI_PARSER_ENTRY
Removing the comments fixes the problem.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Valgrind may use 'mpicc' (from openmi project) to compile libmpiwrap-*.so.
Without any option, it will detect and use 'mpicc' from host and generate
libmpiwrap-*.so for host:
$ file target/usr/lib/valgrind/libmpiwrap-arm-linux.so
target/usr/lib/valgrind/libmpiwrap-arm-linux.so: ELF 64-bit LSB shared object,
x86-64, version 1 (SYSV), dynamically linked, not stripped
We simply disable openmi support for valgrind.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: refactor with other unconditional CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python is not able to detect if compiler double representation is
compliant with IEE754:
checking whether C doubles are little-endian IEEE 754 binary64... no
checking whether C doubles are big-endian IEEE 754 binary64... no
checking whether C doubles are ARM mixed-endian IEEE 754 binary64... no
Accordingly 'legacy' mode isused. It is possible to check this at
runtime by check if 'sys.float_repr_style' contains 'short' or
'legacy'. Calculus correctness is not garanteed with 'legacy'.
Problem is better described here:
http://stackoverflow.com/questions/29920294/what-causes-pythons-float-repr-style-to-use-legacyhttps://bugs.python.org/issue7117
However, all gcc architecture use a representation compliant with
IEE754. So, we can enable it unconditionnaly.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: rework condition to not use strip, as suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python is not able to detect if compiler double representation is
compliant with IEE754:
checking whether C doubles are little-endian IEEE 754 binary64... no
checking whether C doubles are big-endian IEEE 754 binary64... no
checking whether C doubles are ARM mixed-endian IEEE 754 binary64... no
Accordingly 'legacy' mode isused. It is possible to check this at
runtime by check if 'sys.float_repr_style' contains 'short' or
'legacy'. Calculus correctness is not garanteed with 'legacy'.
Problem is better described here:
http://stackoverflow.com/questions/29920294/what-causes-pythons-float-repr-style-to-use-legacyhttps://bugs.python.org/issue7117
However, all gcc architecture use a representation compliant with
IEE754. So, we can enable it unconditionnaly.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
[Thomas: adjust condition to avoid usage of qstrip, suggested by Baruch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Ingenic XBurst is a MIPS32R2 microprocessor.
It has a bug in the FPU that can generate incorrect results in certain
cases. The problem shows up when you have several fused madd
instructions in sequence with dependant operands.
Using the -mno-fused-madd option prevents gcc from emitting these
instructions. This patch adds changes to the toolchain wrapper to use
that option.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the kernel of release 4.1.15_2.0.0_ga, as it builds properly with
gcc 5.x, which is now the default.
We add a linux config fragment to disable the framebuffer, to repair the
build for imx_v6_v7_defconfig.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Cc: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: adjust syntax in fragment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to have a better hierarchy for the genimage scripts used by
NXP mx25, mx51, mx53, mx6, mx7 SoCs, let's place them inside the
board/freescale/common/imx/ directory.
This helps in creating a more natural separation between the mxs scripts
that are placed inside the board/freescale/common/mxs/ directory.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Source /etc/default/telnet to make it possible to override the telnetd
arguments. For example a user may want to set an alternative port.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update 0002 patch to match the one sent as a pull request. The previous
one introduced a new problem that has been addressed in the new version.
Some Linux headers included in certain toolchains may not have an
updated linux/if_tunnel.h which includes linux/ip.h, so we need to
include it unconditionally otherwise linux/if_tunnel.h will use the
struct iphdr before being defined and the compilation will fail in this
way:
In file included from iptunnel.c:33:0:
/usr/include/linux/if_tunnel.h:37:16: error: field 'iph' has incomplete
type
struct iphdr iph;
^
Pull request URL:
https://sourceforge.net/p/net-tools/code/merge-requests/4/
Fixes:
http://autobuild.buildroot.net/results/34f/34f9b10ef6a613057e8f6457d8a0a2fa142ad123/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was previously hardcoded to use the 1st partition although the
bootpart variable was used to download kernel/dtb from any partition.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original submitter and follow-up contributors to the qmx6
defconfig no longer have the hardware available or the time/interest
to update this defconfig, which currently fails to build with gcc
5.x. Due to this, this commit removes this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig no longer builds with gcc 5.x, and the original
submitter, Gustavo, no longer has the hardware to test this
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a webrtc GStreamer plugin that will
have to select the webrtc-audio-processing package (and therefore
inherits its dependencies), this commits adds a
BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING_ARCH_SUPPORTS blind option to avoid
duplicating the architecture dependencies of this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's new for 1.10.0, add an explicit option for the fdkaac plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add missing dependencies for the fdk-aac select, as noticed
by Baruch Siach.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a fdk-aac GStreamer plugin that will
have to select the fdk-aac package (and therefore inherits its
dependencies), this commits adds a BR2_PACKAGE_FDK_AAC_ARCH_SUPPORTS
blind option to avoid duplicating the architecture dependencies of
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's a new feature for 1.10.0+, however it doesn't have an
enable/disable configure switch so just handle the dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
U-Boot KConfig allows to take care of CONFIG_OLD_SUNXI_KERNEL_COMPAT
in order to properly start the kernel (Error: unrecognized/unsupported machine ID)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig has not been updated in any significant way since 2011,
when Peter moved it to use a mainline kernel. It's now using an
ancient 3.0 kernel, and a vendor-specific U-Boot version that fails to
build with various "undefined reference" errors:
undefined reference to `show_boot_progress'
undefined reference to `image_print_contents'
undefined reference to `wait_ms'
So it's time to get rid of the defconfig for this platform.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a standard genimage script for the MXS processors (MX23 and MX28).
Based on the common scripts for the other imx devices:
board/freescale/common/genimage.cfg.template
board/freescale/common/post-image.sh
This makes it easier to add new MX23/MX28 boards configurations into
Buildroot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 0b6b67f34d ("jamvm: add patch to
fix musl build") introduced a patch to fix the jamvm build with the
musl C library. While the commit log pretends that the build was still
working with uClibc, it is not correct: it no longer builds fine with
uClibc on i386/x86_64, because the Buildroot default configuration for
uClibc doesn't enable <fenv.h> support.
Therefore this commit adapts the patch to use <fenv.h> if available
(which is the case with musl), and otherwise fall back to
<fpu_control.h>, which is available in uClibc.
Thanks to Waldemar for the investigation.
Fixes:
http://autobuild.buildroot.net/results/325a50d15e1836b31df4e84ba83b296abfb73041/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kvm-unit-tests package defines a KVM_UNIT_TESTS_ARCH variable, but
never used it. Due to this, on PowerPC64, we were passing an incorrect
value, causing a build failure.
In addition, once the KVM_UNIT_TESTS_ARCH is used, it appeared that
its value for x86_64 was incorrect, due a typo: it was x86_84 instead
of x86_64.
Fixes:
http://autobuild.buildroot.net/results/16836c02f4d1ab5df6b2e21a4fcdbbf4a7542f22/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.
This speeds up the start of the build on my machine from 5.6s to
4.9s.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This configuration for the KwikByte KB9202 was added back in July 2008
(commit e27fef5183), and was never
updated since then. It still uses a 2.6.38 kernel, with the out of
tree patches from the former AT91 kernel maintainer. The board has
been discontinued according to its page at
http://www.kwikbyte.com/KB9202.html.
This defconfig no longer builds since the switch to gcc 5.x as the
default. Therefore, it's time to get rid of this defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use makedevs to create device nodes in the target rootfs. However,
this can be called several times, e.g. when building several filesystem
images or when rebuilding. When makedevs is called the second time, the
device node already exists so mknod() errors out.
This wasn't noticed before because fakeroot's mknod() wrapper
(incorrectly) does _not_ error out when the file exists already. Now
we switched from fakeroot to pseudo, the problem becomes apparent.
Before creating the device node, check if it already exists and if so,
if it has the correct device type and number. Change of mode and
ownership is still done.
This approach was preferred over removing the target files before
creating them, which would be simpler. However, when e.g. a file exists
as a normal file and makedevs specifies it as a device node, that
really is an error so we should detect it.
The other types don't have to be changed. The 'd' (directory) type is
already OK because it already only creates directories if they don't
exist yet. The 'f' (file mode) and 'r' (recursive) types only operate
on files and directories that exist already.
Patch also sent upstream to busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In upstream busbyox, the code to create devices has been simplified:
the code for a single and for multiple devices is no longer duplicated.
Since we are going to change the device creation code next, it's
convenient to have only one copy to modify.
There are two behavioural changes with this, but they were introduced
silently together with other commits in upstream busybox.
- When mknod() fails, the chmod was still done. This is pointless so it
is no longer done now.
- There was a check for mode != -1; however, a mode of -1 would not
have worked anyway because all bits would be set for mknod(), which
would fail. So this check is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Fabio Estevam <festevam@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
czmq uses readdir_r(), which has been marked as deprecated in glibc
2.24, and czmq uses -Werror which causes the warning to be turned into
an error that aborts the build.
This commit fixes that by removing -Werror. Long-term, we might want
to upgrade czmq to a newer version, since they've removed the use of
readdir_r() in commit 2594d406d8ec6f54e54d7570d7febba10a6906b2. But
getting rid of -Werror is anyway always a good idea in Buildroot.
Fixes:
http://autobuild.buildroot.net/results/f6e4b8ed8571fdcf30eecae121dd11dfdef50799
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ustream-ssl has support for polarssl and cyassl
but since polarssl is made obsolete by mbedtls and cyassl
is not present in buildroot, we have not added support for it.
Signed-off-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pseudo is not python3 friendly. It causes build failure on distros using
python3 as default python interpretor.
./maketables enums/*.in
File "./makewrappers", line 327
return """/* This function is not called if pseudo is configured --enable-force-async */
^
TabError: inconsistent use of tabs and spaces in indentation
File "./maketables", line 76
print "Flags: set for %s" % self.name
^
SyntaxError: Missing parentheses in call to 'print'
make[2]: *** [Makefile:150: wrappers] Error 1
make[2]: *** Waiting for unfinished jobs....
make[2]: *** [Makefile:147: tables] Error 1
Those patches make pseudo works with python2 and python3.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0002 patch tweaked. There is a hunk that has been removed upstream by
this commit:
082210c7a8
- Patches 0004, 0005 and 0006 were backported from upstream and now they
are included in this release, so drop them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I accidentally removed the static build patch when bumping to v1.4.0,
thinking it was merged upstream as of this version, but it's not the
case (it's merged in master), so let's keep the patch file.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python3 complains about missing parentheses.
$ ./support/scripts/get-developers
File "./support/scripts/get-developers", line 45
print f
^
SyntaxError: Missing parentheses in call to 'print'
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With older SoCs and some SD cards, a 1024-bytes offset is needed to allow
ROM code to read the content of the FAT partition. As it is usual to get
a 1M bytes offset for the first partition, use this value to avoid boot
issues.
Signed-off-by: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We've now entirely switched to using pseudo istead of fakeroot, so it is
time to remove the fakeroot package now.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 41f0688d91 ("fs/iso9660:
convert to the filesystem infrastructure"), the is9660 logic uses the
common filesystem infrastructure, so the dependency on host-fakeroot is
no longer needed, and has actually become bogus since we switched to
host-pseudo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Longer explanation of multi-BR2_EXTERNAL
- Mention nobody UID 99 -> 65534 change
- Mention removal of BR2_DEPRECATED
- Mention use of system cmake
- Mention new dependency on ExtUtils::MakeMaker. The other perl
dependencies are not mentioned since they only apply if mpv is built.
- Mention the $(STAGING_DIR)/$(O) check.
- Mention unsafe path detection in -isystem etc.
- Mention linux-tools split.
- Mention changes in legal-info.
- Mention that pseudo is used instead of fakeroot.
- Correct the info of toolchainfile.cmake: it still sets cflags but it
doesn't force them anymore (doesn't append).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig is affected by bug #8516, reported more than a year ago,
and nobody has updated the defconfig since then. In addition, it should
be migrated to the genimage mechanism instead of having its own
mkcubieboard.sh script.
Therefore, let's get rid of this defconfig.
Fixes bug #8516.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Carlo Caione <carlo.caione@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes linker error
http://autobuild.buildroot.net/results/c6272ac900d1a53b976839ac4f50a210b3e6b354
On powerpc64 (and powerpc64le) the build fails due to linker problems
because of an old (2003) workaround for powerpc64, presumably working
around an old toolchain problem that is no longer present. Removing
the workaround allows the build to succeed. A new patch is added for
this.
Additionally, there was a mistake in patch 3: the patch added a test
for HAVE_LIBDL to include/alsa-symbols.h but it was positioned in the
file before config.h was included, so HAVE_LIBDL is never seen as
defined. The test was also using HAVE_LIBDL (which indicates the
library) rather than HAVE_DLFCN (which indicates the header).
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes a struct redefinition problem like this one:
================================
In file included from /usr/include/linux/if_tunnel.h:6:0,
from iptunnel.c:34:
/usr/include/linux/ip.h:85:8: error: redefinition of 'struct iphdr'
struct iphdr {
^
In file included from iptunnel.c:29:0:
/usr/include/netinet/ip.h:45:8: note: originally defined here
struct iphdr
^
================================
iptunnel.c includes netinet/ip.h which contains a definition of the
iphdr struct.
iptunnel.c also includes linux/if_tunnel.h which includes linux/ip.h
which contains a definition of the iphdr struct.
So, both netinet/ip.h and linux/ip.h define the iphdr struct, and both
of them have been included directly or indirectly by iptunnel.c. Because
of that the compilation fails due to a struct redefinition.
The problem can be solved by just not including netinet/ip.h.
The patch has been sent upstream as a merge request:
https://sourceforge.net/p/net-tools/code/merge-requests/3/
Fixes:
http://autobuild.buildroot.net/results/dce/dce499da84b2a41bab946d5109a283ccb85c8b81/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configs/mx6udoo_defconfig supports the quad and dual-lite variants,
so there is no need to keep udoo_quad_defconfig anymore.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The top-level Makefile contains an "override O := $(O)" statement that
is purportedly required to make sure the O flag doesn't leak into the
environment of sub-makes. However, since commit 173135d, there is
already an "override O := ..." a few lines down. Therefore, the first
override is redundant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We reset MAKEOVERRIDES to avoid passing down variables that are
overridden on the command line to the package build systems. Indeed,
the variables overridden on the command line will be Buildroot
variables and not relevant to the package build system. In particular
the O option is used by some packages and the value passed in on the
command line is plain wrong for the individual package.
However, in commit 916e614b, MAKEOVERRIDES was moved earlier and it
was reset _before_ re-entering make in the cases when something has
to be fixed up (incorrect umask, non-absolute paths in O or CURDIR).
Therefore, if make is re-entered, any command line overrides are lost.
This particularly bites the autobuilders, because they use
O=<relative path> to specify the output directory, and they add
BR2_JLEVEL=... to avoid starting too many jobs in parallel. The
BR2_JLEVEL override is lost.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
- quad-core Cortex-A7 @1.2GHz
- 256 or 512MiB of DDR
- uSDCard as only storage option
- 3x USB 2.0 host (one socket, two on expansion pin-holes)
- 1x USB 2.0 OTG (also used as power source)
- 10/100 etehrnet MAC
- GPIOs, SPI, I2c...
Support for the Nanopi NEO in U-Boot and Linux is very recent, so much
so that we have to use an -rc tag for U-Boot and a special Linux tree.
As for Linux, I pushed a git tree on Github with a single tag that
matches what is currently queued in the sunxi-next queued for 4.10,
based on 4.9-rc3. All those commits are from Maxime's tree, the
maintainer for most sunxi stuff.
This also means that we can't use the Linux headers from the kernel
being built (which is what we usually do) because those report 4.9,
while Buildroot currently knows only of 4.8 at best. So this is what we
use.
Unfortunately, support for the ethernet MAC and the USB OTG are not yet
upstream, but are being actively worked on.
The Nanopi NEO is very similar to the Orangepi PC, so I was able to
scanvenge most of its configuration. ;-)
Thanks Maxime for your help on IRC! :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pseudo is a program that can either be used directly or as an
LD_PRELOAD, which allows these operations to succeed as if the
user did have system administrator privileges even though they
are an ordinary user.
Pseudo has a lot of similarities to fakeroot but is a new
implementation that improves on the problems seen using fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Andrey Yurovsky <yurovsky@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tinyalsa has started doing release, so we will use it.
With this release, both our patches were applied mainline:
- 0001-tinypcminfo-make-function-pcm_get_format_name-static.patch [1]
- 0002-asound.h-include-time.h-to-get-struct-timespec-proto.patch [2]
The Makefile has changed a lot, so we take advantage of that to simplify
our package.
1. 7d204edfe8
2. c8333f8c7a
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[Thomas: add patch to remove doxygen usage.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Babeltrace 1.4, there is support for printing debug information
along with compatible traces and event records. Babeltrace needs
elfutils in this case.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
[Thomas:
- add better description for
0002-m4-ax_lib_elfutils.m4-add-cache-variable.patch
- use automatic dependency on elfutils rather than a very complicated
Config.in symbol]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although Babeltrace is available for all major Linux distributions, some
of them have a quite old version of this project.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current patches are dropped because they were merged upstream.
The new patches exist to fix the build with musl. They were submitted on
the lttng-dev mailing list, but not merged yet, or not merged in 2.8.2.
LTTng-tools now has its man pages written in AsciiDoc and they get
converted to troff at build time. This is not needed in a Buildroot
image anyway.
The --enable-lttng-ust/--disable-lttng-ust configure options are renamed
to --with-lttng-ust/--without-lttng-ust in v2.8.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds an ev3dev Linux drivers extension that provides Linux kernel
drivers for LEGO MINDSTORMS EV3 from the ev3dev project.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a script to create SD card and flash images for LEGO MINDSTORMS
EV3 using the genimage tool.
The default kernel config had to be modified to add support for squashfs
and to add a ram disk.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds U-Boot configuration for LEGO MINDSTORMS EV3. U-Boot has
had support for LEGO MINDSTORMS EV3 since v2016.05.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-8864 - denial-of-service vector which can potentially be
exploited against BIND 9 servers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: fix hash URL in .hash file, noticed by Vicente.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
List of fixed CVEs:
CVE-2016-8615: cookie injection for other servers
CVE-2016-8616: case insensitive password comparison
CVE-2016-8617: OOB write via unchecked multiplication
CVE-2016-8618: double-free in curl_maprintf
CVE-2016-8619: double-free in krb5 code
CVE-2016-8620: glob parser write/read out of bounds
CVE-2016-8621: curl_getdate read out of bounds
CVE-2016-8622: URL unescape heap overflow via integer truncation
CVE-2016-8623: Use-after-free via shared cookies
CVE-2016-8624: invalid URL parsing with '#'
CVE-2016-8625: IDNA 2003 makes curl use wrong host
Full ChangeLog:
https://curl.haxx.se/changes.html#7_51_0
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
- Add -P for overriding the password prompt we search for
- Add -v for verbose logging of the prompt detection prompt.
- Allow packagers and compilers to change the default password prompt.
- When giving -V, also print the default password prompt.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog
- Upgrade license chksum to v14 EULA
- Check for lib_src_ppp_arm11_elinux.so library before removing
- Fixes for error hadling and robustness
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/78856879
Implicitly tested through gstreamer as the 0.10 plugin relies on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bug Fixes for P8.6 Graphics includes:
3D: MGS-2239 Destroy EGL window surface and makecurrent new surface
cause segmentation fault
3D: MGS-2237 [6Q-SDB] FB met GPU STATE DUMP when testing ES30
Conformance 100%
3D: MGS-2101 EGLImage created with an OpenVG parent image always returns
EGL_BAD_ACCESS
3D: MGS-2086 Met GPU dump when do driver test under dvfs stress test
3D: MGS-2150 optimized vertex copy for attribute upload
3D: MGS-2100 CubeMap sub-texture copy disappears when small size and
small x/y offset
3D: MA-8321 testTextureViewStress200Hz fail on kk4.4.3_2.0.1 with GPU
5.0.11p8
3D: MA-8302 testOpenGlEsVersion fail on kk4.4.3_2.0.1 with GPU 5.0.11p8
3D: MA-8300 Fix antutu3.0.3 2D/3D performance downgrade
3D: MA-8104 fix Antutu6.x benchmark 3D not supported issue
3D: MA-8110 Change NOTIFY_OK to NOTIFY_DONE in task_notify_func.
3D: MGS-1851 fix the integer id resource leak
3D: MGS-1845 refine es11 extension
3D: MGS-1717 display no output when use gplay to do loopback test
Compiler: MGS-1948 Fix UBO in shader can not support by new bsp release.
2D-VG: MGS-2154 VG kernel driver Allocate and Free wrong memory type
2D-VG: MGS-2089 fix gc355 vg freeze with interrupt signal
2D-VG: MGS-2084 fix vg pbuffer memory leak
2D-VG: MGS-1756 Portability issue: OpenVG includes "malloc.h" instead of
"stdlib.h" for malloc() function
2D: MA-8378 Refine g2d and gpu helper functions.
2D: MGS-1847 fix G2D build broken with g2dBUILD_FOR_VIVANTE=1
General: MGS-2243 Fix high impact Coverity issue in GPU kernel driver
General: MGS-2233 fix gpu axi bus error with process kill operations
General: MGS-2188 Fix misleading indents causing errors in gcc6
General: MGS-1624 QNX - port gmem_info tool
General: MGS-1630-1 5.0.11.p8 driver can't pass build with kernel 4.1 on
Android M6.0
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/de26bc15
This package has been tested with both X11 and Framebuffer backends:
# cd /usr/share/examples/viv_samples/vdk/
# apitrace trace --api egl ./tutorial7
# gmem_info
... display memory use per PID ...
# apitrace replay tutorial7.trace
# eglretrace tutorial7.trace
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog:
Coverity fixes for resources leaks, null dereference, string overflows
and checking return.
This patch is based on the Yocto equivalent:
https://github.com/Freescale/meta-freescale/commit/b138b5b0
Implicitly tested through gstreamer as the plugins rely on it:
# gst-launch-1.0 playbin uri=file:///root/tears_of_steel_1080p.webm
# gst-launch-1.0 filesrc location=/root/tears_of_steel_1080p.webm ! \
matroskademux ! imxvpudec ! imxipuvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LTTng-modules, starting from v2.8, has a mechanism to be built directly
into a Linux kernel image, that is, not as loadable kernel modules. For
this the `CONFIG_LTTNG_CLOCK_PLUGIN_TEST` and `CONFIG_LTTNG` Make
variables were introduced. They need to be explicitly set to `m` here to
build the project as loadable kernel modules.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the --enable-python-agent configure option to build the LTTng-UST
Python agent when Python 2 or Python 3 is also part of the BR image. The
LTTng-UST Python agent is a Python package which adds LTTng tracing to
Python's standard logging when imported.
Disable the Python agent otherwise.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two current patches are removed because they were merged upstream.
The new patch is needed to build with uClibc. It was also submitted
upstream, but not merged as is yet. Defining NT_GNU_BUILD_ID to 3 when
it's not defined seems like it's something done in other projects. This
definition's value should never change (number of the build ID note
section in ELF objects).
LTTng-UST now has its man pages written in AsciiDoc and they get
converted to troff at build time. This is not needed in a Buildroot
image anyway.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the standard sdcard.img format that can be directly copied
to the SD card.
Remove the custom create-boot-sd.sh script and update the readme.txt
file accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: further tweaks to readme.txt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump to 4.7, Xen fails to build because of a double definition
of __OBJECT_FILE__. This is due to (who would have guessed) the weirdness
of their buildsystem.
Fix that with a dirty hack: undefine the macro before defining it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Alistair Francis <alistair.francis@xilinx.com>
[Alistair: Tested on ARMv7 (little endian) boot.]
Tested-by: Alistair Francis <alistair.francis@xilinx.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Expose the Kconfig-related help commands when U-Boot uses the Kconfig
configuration. Like others (like Linux, barebox, busybox), only expose
menuconfig, not all the configurators.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment from trinity Config.in currently does not show up in
menuconfig for glibc or uClibc toolchains with older headers.
This commit fixes the logic so that it shows up when either one of the
dependencies from trinity are not met.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adjust default config patch to match new major version.
localhost binding is now default so drop it, 300s keepalive is now
default as well (instead of 60s from the previous patch and 0 by
default) - which sounds reasonable so keep it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The network-manager.mk passes --mandir=$(STAGING_DIR)/usr/man/, which
causes man pages to be installed in
$(STAGING_DIR)/$(STAGING_DIR)/usr/man and
$(TARGET_DIR)/$(STAGING_DIR)/usr/man.
This is definitely bogus and causes some build failures thanks to the
new check added by Yann E. Morin. This option was in
network-manager.mk since the addition of the package. Maybe it was
fixing a bug in the package logic back at the time, but nowadays, it
causes an installation at the wrong location. Without this commit, the
man pages are properly installed at the right location.
Fixes:
http://autobuild.buildroot.net/results/92683749b0b8e726bc83781ca6d8e103428362ba/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is required for the upcoming evince package which checks for adwaita
presence via pkgconfig file, which normally resides in staging.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For musl we need patches for bintils 2.25.1 and 2.26.1.
Binutils 2.27 and gcc 6.2.x does not work for microblaze,
even not for uClibc-ng or glibc.
For gcc 5.4.x the existing patch need reworking so that
musl and uClibc-ng is supported.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas:
- Add proper description for the binutils patches
- Use BR2_microblaze instead of BR2_microblazeel and BR2_microblazebz]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently buildroot will create a broken system for any kernel version
not between 3.18 and 4.1, as the bnx2x firmware it includes is only
valid for that version of the upstream driver.
This change modifies the build so that all versions are included as there was a
strong preference for not adding options for each version, nor only supporting
the latest kernel:
On Fri, Feb 26, 2016 at 7:09 PM, Thomas Petazzoni wrote:
> I think adding new config to chose between different versions of a
> given firmware is going a bit too far. If we were to do that for all
> firmwares in linux-firmware, it would really increase the number of
> Config.in options too much.
>
> Shall I suggest to install both versions of the firmware? The firmware
> files are not that large, and if filesystem size is really a strong
> issue, it is always possible to clean up the non-required firmware
> files in a post-build script.
On Wed, Mar 2, 2016 at 7:47 AM, Arnout Vandecappelle wrote:
> No, this is certainly not good, it fixes 4.2+ and simultaneously breaks 4.1-.
>
> What is wrong with Thomas's proposal to remove the unneeded versions in a
> post-build script? If your size is so important that 640K matters, you would
> probably anyway want to keep only one of the six binaries instead of three
> different chip revisions.
It is up to the user to ensure they remove the versions they don't want.
Note that this increases the size of the root file system by about 8MB.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change log since last version bump:
2cb6695 Add missing -c for write_reliability
e094e28 Fix return value check from set_partitioning_setting_completed()
f90eac4 Add help texts for -c option
752072d Add -c option for partitioning commands
55380d9 Register being set is other than mentioned in printed message.
3c02759 Fix reported offset for enhanced user area start address
a3d3331 mmc-utils: Add Command Queue fields to Extended CSD
0ca049f mmc-utils: Add ability to configure write protect on an eMMC device
bb779ac mmc-utils: Add disable partition boot to 'mmc bootpart enable'
89cd01e mmc_utils: add ffu support
4af1749 mmc-utils: Merge the lsmmc tool into mmc-utils
44f94b9 mmc_utils: doc: add man-page
928ff07 mmc_utils: gp create: only allow partition [1-4] to be selected
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARCH_SUBDIR is computed based on the value of ARCH_SYSROOT_DIR and
SYSROOT_DIR. For nested toolchains ARCH_SYSROOT_DIR is a subdir of
SYSROOT_DIR, so a sed command like this one...
sed -r -e "s:^${SYSROOT_DIR}(.*)/$:\1:"
...basically removes the leading SYSROOT_DIR part from ARCH_SYSROOT_DIR.
But, for side-by-side sysroot toolchains ARCH_SYSROOT_DIR and
SYSROOT_DIR are at the same level, so the above sed command doesn't
make any effect.
This patch therefore improves the calculation of ARCH_SUBDIR to
clearly handle the three possible cases:
- There is a single sysroot, or the selected architecture sysroot is
the main one (i.e SYSROOT_DIR == ARCH_SYSROOT_DIR). In this case,
ARCH_SUBDIR is empty.
- There are side-by-side sysroots, such as
SYSROOT_DIR=.../sysroot/mips-r2-hard/ and
ARCH_SYSROOT_DIR=.../sysroot/mipsel-r2-hard/.
- The arch-sysroot is nested, such as SYSROOT_DIR=.../sysroot and
ARCH_SYSROOT_DIR=.../sysroot/armv4t/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
[Thomas: improve the logic to handle the SYSROOT_DIR==ARCH_SYSROOT_DIR
case.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures (namely x86-64), glibc may provide a libmvec
library since glibc 2.22, which programs built with gcc OpenMP support
might get linked to.
In order for these programs to work on the target, we need to copy
this library to the target filesystem.
This commit takes care of this for the external toolchain
situation. Note that libraries listed in TOOLCHAIN_EXTERNAL_LIBS are
silently ignored if they don't exist. Therefore, we don't need to have
any condition on the architecture or glibc version.
For more details on libmvec, see
https://sourceware.org/glibc/wiki/libmvec.
Fixes bug #9111.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some architectures (namely x86-64), glibc may provide a libmvec
library since glibc 2.22, which programs built with gcc OpenMP support
might get linked to.
In order for these programs to work on the target, we need to copy
this library to the target filesystem.
This commit takes care of this for the glibc package (used for the
internal toolchain backend). Note that libraries listed in
GLIBC_LIBS_LIB are silently ignored if they don't exist. Therefore, we
don't need to have any condition on the architecture or glibc version.
For more details on libmvec, see
https://sourceware.org/glibc/wiki/libmvec.
Fixes bug #9111.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages misbehave, and install files in either $(STAGING_DIR)/$(O)
or in $(TARGET_DIR)/$(O) .
One common reason for that is that pkgconf now prepends the sysroot path
to all the paths it returns. Other reasons vary, but are mostly due to
poorly writen generic-packages.
And a new step hooks to check that no file gets installed in either
location, called after the install-target and install-staging steps.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
perl may fail to build on newer host architectures such as aarch64 due
to its inability to guess the host architecture to build 'miniperl',
which is built during the process. An error message looks like this:
Configuring build-time miniperl for unknown
ERROR: No $target defined (?!)
ERROR: configure --mode=buildmini failed
This happens because the config.sub and config.guess files from perl are
not modified and may become outdated.
These files are normally updated automatically by a Buildroot hook for
autotools packages, to avoid problems like these.
Although perl uses the config.sub and config.guess files, it is not a
strict autotools package, so it is not defined as an "autotools-package"
in Buildroot and so it doesn't inherit the hook.
This commit makes perl borrow the hook from the autotools infrastructure
so that it can build on newer build architectures.
This has been tested by building it on an aarch64 host machine.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Acked-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Also remove ac_cv_linux_vers caching since this check was remove in upstream
commit f3e011b18c55ae.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We can avoid host headers using a --with-libnl parameter to override the
default host headers path. The configure script adds /include suffix to the
include path. So we still need to manually add -I with the correct path to
CFLAGS because libnl headers are under the libnl3/ directory.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains the Freescale manufacturing tool.
It is designed to program firmware to i.MX boards during production.
The communication is done over USB using the Freescale UTP protocol.
The project is maintained on NXPMicro Github repository:
https://github.com/NXPmicro/mfgtools
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas:
- remove dependency on host-cmake, this is handled by the
host-cmake-package infrastructure
- add quotes around $(HOSTCXX)
- add CPOL.htm to <pkg>_LICENSE_FILES.
- tweaks to the readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On x86 (both i386 and x86_64), the kvm-unit-tests code uses
__builtin_reachable, which appeared in gcc 4.5. This commit adds the
relevant dependencies to kvm-unit-tests:
- on i386, we need gcc 4.5 as the target compiler
- on x86-64, we need gcc 4.5 as the host compiler, because we use the
host compiler to build kvm-unit-tests for this architecture
Fixes:
http://autobuild.buildroot.net/results/21340a7e6494e23adb2fe8dc6253ab220c380fec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of new dependencies in the
kvm-unit-tests package, add the BR2_HOST_GCC_AT_LEAST_4_5 symbol.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump includes several fixes for x86 and a significant fix
to powerpc transactional memory tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kvm-unit-tests requires a multilib compiler for x86_64 as it compiles
32bit boot code.
This patch uses the BR2_HOSTARCH_NEEDS_IA32_COMPILER option to enforce
this and avoids using TARGET_CROSS for x86_64 targets and uses the host
32bit (and 64bit) capable compiler.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas: reword comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lib/colors.c uses HAVE_LIBTINFO to decide whether term.h and ncurses.h
should be included. However, the configure.ac check is bogus: it
checks for tinfo using pkg-config, and then if it fails, checks with
AC_CHECK_LIB(). So, if you have tinfo installed, but not the
corresponding development package, the pkg-config test will fail, but
the AC_CHECK_LIB test will succeed, even though the headers are not
available.
To address this, we explicitly tell host-util-linux that tinfo is not
available, like we're already doing for ncurses.
Fixes:
http://autobuild.buildroot.net/results/3c447e601a7b728860e78cabf2191ab206e6480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, there are two failure paths in the wrapper:
- if the tar fails, then the error is ignored because it is on the
left-hand-side of a pipe;
- if the find fails, then the error is ignored because it is a
process substitution (and there is a pipe, too).
While the former could be fixed with "set -o pipefail", the latter can
not be fixed thusly and we must use an intemediate file for it.
So, fix both issues by using intermediate files, both to generate the
list of files to include in the archive, and generate the archive in a
temporary tarball.
Fixes the following build issue, where the find is failing for whatever
unknown reason:
http://autobuild.buildroot.net/results/20f/20fd76d2256eee81837f7e9bbaefbe79d7645ae9/
And this one, where the process substitution failed, also for an unknown
reason:
http://autobuild.buildroot.org/results/018/018971ea9227b386fe25d3c264c7e80b843a9f68/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we can dump the reverse dependencies of a package, add the
ability to graph those.
It does not make sense to do a full reverse graph, as it would be
semantically equivalent to the direct graph. So we only provide a
per-package reverse graph.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quote from erlang configure without unixodbc:
checking for odbc in standard locations... no
configure: WARNING: No odbc library found skipping odbc
configure: WARNING: "ODBC library - header check failed"
configure: WARNING: "ODBC library - link check failed"
Quote from erlang configure with unixodbc:
checking for odbc in standard locations... -L/home/buildroot/br3_couchdb/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/lib
checking for SQLAllocHandle in -lodbc... yes
To check for unixodbc support used by erlang use readelf:
$ output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/lib/erlang/lib/odbc-2.11.1/priv/bin/odbcserver | grep NEEDED
0x00000001 (NEEDED) Shared library: [libodbc.so.2]
0x00000001 (NEEDED) Shared library: [libc.so.0]
Tested using this minimal defconfig:
BR2_PACKAGE_ERLANG=y
BR2_PACKAGE_ERLANG_SMP=y
BR2_PACKAGE_UNIXODBC=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finding the packages that select another one in a specific configuration
is not very trivial:
- when optional, the dependency is not expressed in Kconfig
- looking at the .mk files is not very nice.
Introduce a way to dump reverse dependencies of packages, i.e. the list
of packages that directly depend on that package. Like for direct
dependencies, we limit the list to the first-order reverse dependencies.
Document it in the main help; use the opportunity to also document
foo-show-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It now explains limitations of building against Lua < 5.2 interpreters
and how to link to LuaJIT library.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update U-Boot to 2016.09.01 and kernel to 4.8.4 version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the SD card is connected to the host PC it can be mounted as
/dev/mmcblk0 or /dev/sdX, depending on how the SD controller is connected to
/the PC.
In this case the first partition is /dev/mmcblk0p1, not /dev/mmcblk01.
So use the ${PART1} variable to correctly assign this location.
[Peter: extend commit meesage]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With musl C library, we get following error when building rsyslog:
imfile.c: In function 'in_setupFileWatchStatic':
imfile.c:1614:28: error: 'GLOB_BRACE' undeclared (first use in this function)
GLOB_MARK|GLOB_NOSORT|GLOB_BRACE, NULL, &files);
^
flag GLOB_BRACE is not available on musl. Since package uses it
unconditionally, we mark it not available for musl.
Fixes:
http://autobuild.buildroot.net/results/6d4/6d480bb1e1466809d8ff119f6b35bb91df00785c/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, HAVE_LUA=y was only passed when BR2_PACKAGE_LUA=y. However,
swupdate can also use LuaJIT instead of the classic Lua. Therefore,
this commit updates the package to use BR2_PACKAGE_HAS_LUAINTERPRETER
and the luainterpreter virtual package.
Note that the swupdate configuration needs to be updated separately
(via swupdate-menuconfig) to enable Lua support, and to specify the
Lua version (which should be jit-5.1 to link against LuaJIT).
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
[Thomas: use the luainterpreter virtual package, expand commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current type for 'patches' argument is str. It supposed to only
contain names of files.
If we specify FileType as type, then we don't need to open file ourself
and it allows script to read patch from standard input as well.
e.g.
$ git show -1 | ./support/scripts/get-developers -
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use the common board/freescale/common/post-image.sh script instead of
a custom one.
As the final image binary is called "sdcard.img" update the documentation
accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c457213fbc reworked the selection
of PHP interfaces, moving from a choice..endchoice to a three
independent sub-options.
Thanks to how choices are handled by kconfig, an option suitable for
noMMU platforms was automatically chosen by default. When the
choice...endchoice got removed in
c457213fbc, we introduced a "select" for
one of the interfaces, to make sure at least one interface is
selected.
Unfortunately, the selected interface does not build on noMMU
platforms. In order to preserve the previous behavior (CGI interface
is selected by default on MMU capable platforms), this commit makes
the select logic a bit more complicated:
- CGI is selected on MMU-capable platforms if neither CLI or FPM are
selected
- CLI is selected on MMU-less platforms, since this is anyway the
only available interface.
Fixes:
http://autobuild.buildroot.net/results/85ea09188f1e996cb14b4b83a17736c096c569a8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rp-pppoe configure script uses AC_PATH_PROG() to find the path of
a number of tools on the build machine. But in fact, those paths are
not used to call the tools on the build machine, but rather to replace
variables in scripts that are executed in the target.
Due to this, if those tools on the build machine are not located at
the same place as their equivalent in the target, the scripts will
fail to run. To address this, we pass the necessary cache variables to
override the autoconf checks.
The path from pppd has been taken from the build result of the pppd
package. The path for setsid, id and echo have been taken from the
build result of Busybox, assuming that full-blown variants of those
tools would be installed at the same location.
Fixes bug #8811.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
toolchain-wrapper was not reinstalled. So rules toolchain-external-reinstall,
gcc-initial-reinstall, gcc-final-reinstall didn't work as expected.
In add, normalize variable name: s/TOOLCHAIN_BUILD_WRAPPER/TOOLCHAIN_WRAPPER_BUILD/
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just needed to add --with-ldap to POSTGRESQL_CONF_OPTS and add openldap
to POSTGRESQL_DEPENDENCIES when BR2_PACKAGE_OPENLDAP is on
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following suggestion of Yann Morin, rework selection of php
interfaces: use booleans instead of choice to be able to select
multiple interfaces as they are not exclusive. We make sure at least
one of the options is selected.
It should be noted that previously CGI and FPM could not be selected
at the same time. This is now possible. Bug that prevented compilation
of CGI and FPM binaries at the same time has been fixed since PHP 5.4
(https://github.com/php-build/php-build/issues/101).
Legacy handling is added for the two options that are removed, and the
appropriate new options are selected.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages download files (especially patches) with a ? in the
URL. The ? marks the query part of the URL. However, the downloaded
file still contains the ? but from then on it doesn't designate a
query part anymore. Therefore, when fetching from PRIMARY or
BACKUP site over http, the server will report a 404 Not Found.
To fix, we need to replace the ? with %3F. Obviously, this should
be done only when fetching from PRIMARY or BACKUP. For fetching
from the real upstream, the ? really does designate the query part.
Fixes#9371.
Reported-by: Johan Derycke <johanderycke@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: replace 'SECONDARY' by 'BACKUP'.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building this minimal defconfig
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_GCC_VERSION_6_X=y
fails:
In file included from ../../../../libmpx/mpxrt/mpxrt.c:54:0:
../../../../libmpx/mpxrt/mpxrt.c: In function 'read_mpx_status_sig':
../../../../libmpx/mpxrt/mpxrt.h:52:42: error: invalid application of
'sizeof' to incomplete type 'struct _libc_fpstate'
#define XSAVE_OFFSET_IN_FPMEM sizeof (struct _libc_fpstate)
To fix disable libmpx for musl builds, other projects did the same:
3ec2211548http://git.alpinelinux.org/cgit/aports/commit/main/gcc/APKBUILD?id=1830e485126ea9a95d763317fb0c508c1ff297d2
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps cryptopp from 5.6.3 to 5.6.5 in order to fix bug
The commit f707b9ef1688d4429ca6239cf2dc236440974681, which Buildroot
was downloading as a patch to fix build with older gcc versions, has
been merged upstream as of 5.6.4, is therefore no longer necessary,
and dropped in this commit.
In addition, Andrey Volkov in the bug report #9321, proposed to add a
number of patches to cryptopp to solve issues when using
tegrarcm. Those patches are the following ones:
- patch 0: moving to autotools as the build system. This is not
strictly a bug fix, and is not necessary.
- patch 1: merged upstream in
"3941be18891a6a87626b7c70f715ca91c61c08c3 Fixed hang on ARM
platforms in Integer::DivideThreeWordsByTwo", which is part of
5.6.5.
- patch 2: merged upstream in
"9fca0c28023a177106cf58a3de6da610f185a6e4 Work around issue on
ARMEL in MultiplyTop and GCC. ARMHF is OK", which is part of 5.6.5.
- patch 3: merged upstream in
"dce2317195a7d9aa77b159fd1beddaf8358f6243 Increase range for GCC
workaround on ARMEL. After speaking with AP from GCC, he states
some issues are still likely present in Master, which is GCC 6.0",
which is part of 5.6.5
- patch 4: merged upstream in
"605744d8260c6ada033805c13ae0b2646acf18d6 Fixed SecBlock append
when "this == t", fixed assert, added validation test (Issue 92)",
which is part of 5.6.5
- patch 5: merged upstream in
"9f335d719ebc27f58251559240de0077ec42c583 Fix the Rijndael timing
attack counter measure", which is part of 5.6.5
- patch 6: merged upstream in
"d8b02cfaafd7350ed0f876cd5da405cff330d537 Fixed m68k detection
(Issue 153)", which is part of 5.6.5
- patch 7: merged upstream in
"c82fd655ed7465db8d21a0e0559c304a7a86d298 Cleared assert in debug
builds (Issue 138)", which is part of 5.6.5
Bottom line: none of the patches proposed by Andrey Volkov are
necessary if we bump to 5.6.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
From the build configuration, Buildroot defines and set some compiler
and linker flags that should be passed to any packages build-system.
For package using the cmake-package infrastructure, this is achieved
via the toolchainfile.cmake.
This change simplifies the way the toolchainfile.cmake file handles
these flags: it now just sets them, without any attempt to extend them
with those Buildroot defined.
This change still allows overriding these flags from the configure
command line.
So, now, when a CMake-based package needs to extend them, they should
be fully set from the package *.mk file. This behavior is consistent
with what is done for others package infrastructures.
This change should not pull any regression WRT the bug #7280 [1].
However, now, when someone uses the toolchainfile.cmake file outside of
Buildroot, he/she must overload all compiler/linker flags (including the
ones Buildroot sets since they no longer get automatically added).
[1] https://bugs.busybox.net/show_bug.cgi?id=7280
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Max Filippov <jcmvbkbc@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a build type is set, CMake does append some flags that can override
those set by Buildroot due to the gcc option parser (in which the last
argument controling an option wins).
Hereafter is a summary of the optimization and debug flags set by
Buildroot and appended by CMake.
* Flags set by Buildroot depending on the configuration:
BR2_ENABLE_DEBUG | Optim. level | Buildroot {C,CXX}FLAGS
=================+=====================+=======================
y | BR2_OPTIMIZE_S | -Os -gx
y | BR2_OPTIMIZE_G | -Og -gx
y | BR2_OPTIMIZE_{0..3} | -On -gx
n | BR2_OPTIMIZE_S | -Os
n | BR2_OPTIMIZE_G | -Og
n | BR2_OPTIMIZE_{0..3} | -On
* Default flags appended by CMake depending on the build type:
Build type | Flags | Effects on {C,CXX}FLAGS
===============+=================+===========================================
Debug | -g | Force -g, compatible with BR2_ENABLE_DEBUG
MinSizeRel | -Os -DNDEBUG | Set -Os, compatible with BR2_OPTIMIZE_S
Release | -O3 -DNDEBUG | Set -O3, closest to the others cases,
| | though the optimization level is forced.
RelWithDebInfo | -O2 -g -DNDEBUG | Force -g and set -O2, not friendly with BR
To avoid the CMake flags take precedence over the Buildroot ones, this
change sets in toolchainfile.cmake the per-config compiler flags CMake
can append depending on the build type Buildroot defined.
So, CMake does not mess up with the compilation flags Buildroot sets.
It is still possible to override these per-config flags on the cmake
command line.
Note:
If a CMake-based project forces the compiler and/or linker flag
definitions (the default ones or the per-config ones - e.g.
CMAKE_C_FLAGS/CMAKE_C_FLAGS_{DEBUG,RELEASE}), there is not much
Buildroot can do about it.
So, the flags will be overwritten anyway in these cases.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- adjust comment in toolchainfile.cmake.in, as suggested by Arnout.
- also handle CMAKE_Fortran_FLAGS_*, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The chosen CMAKE_BUILD_TYPE encodes an option of the Buildroot
configuration, so it makes more sense to save it in the
toolchainfile.cmake than to pass it during configure.
It is still possible to override the build type on the cmake
command line.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: reword description in the CHANGES file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4b01201834.
Before reverting this patch, CMake packages are built with the following
options:
* if BR2_ENABLE_DEBUG is set:
The CMake build type is set to RelWithDebInfo, which means:
- Optimization level is forced to: -O2;
- no log nor assert due to -DNDEBUG;
- BR2_DEBUG_{1..3} effect is unchanged;
* otherwise:
The CMake build type is set to Release, which means:
- Optimization level is forced to: -O3;
- no log nor assert due to -DNDEBUG (as expected).
In any case, the optimization WRT the binary size is always ignored
and forced.
Reverting to the previous situation, so Buildroot now chooses between
the 'Debug' and 'Release' config types, which are semantically closer
to what Buildroot does everywhere else:
* if BR2_ENABLE_DEBUG is set:
The CMake build type is set to Debug, which means:
- only -g option is passed by CMake;
- optimization is not forced, nor debug level, so they are kept
as-is;
* otherwise:
The CMake build type is set to Release, so no change in this case:
- Optimization level is forced to: -O3;
- no log nor assert due to -DNDEBUG (as expected);
- size optimization is ignored.
Follow-up patches will fix the CMake flag variables that are appended by
CMake.
Cc: Charles Hardin <ckhardin@exablox.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to avoid duplicating architecture dependencies in the trinity
Config.in file, this commit introduces a
BR2_PACKAGE_TRINITY_ARCH_SUPPORTS Config.in variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It also changes the python-protobuf.hash file to be a symbolic link to
../protobuf/protobuf.hash so that both hash files don't have to be
updated when protobuf is bumped.
In addition, the 0001-disable-unneeded-build-dependencies.patch patch
from package/python-protobuf/ is removed because it has been merged
upstream.
Signed-off-by: Jan Heylen <heyleke@gmail.com>
[Thomas: fix the build of python-protobuf.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When radius plugin is enabled, we get following error:
/usr/bin/install: cannot stat '/home/rahul.bedarkar/buildroot/output/build/pppd-2.4.7/pppd/plugins/radius/etc/server': No such file or directory
Name of config file is 'servers' instead of 'server'.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 035567b279 solved the build issue
of pppd with Linux 4.8 kernel headers, but in the process broke the
build with older kernel headers such as 3.10.
This commit takes a different approach, by moving the <netinet/in.h>
include above linux header includes.
Linux uapi headers try to avoid redeclaring things from libc via
linux/libc-compat.h. However that only works if the libc header is
included first.
Signed-off-by: Stefan Nickl <Stefan.Nickl@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The U-Boot configuration for Zynq boards have CONFIG_FIT_SIGNATURE=y,
so they need OpenSSL to be available on the host system. In order to
add OpenSSL to the build this commit adds the
BR2_TARGET_UBOOT_NEEDS_OPENSSL=y to the relevant defconfigs.
Fixes#9316.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some U-Boot board configurations have CONFIG_FIT_SIGNATURE=y. In this
case, when U-Boot builds its tools, it requires OpenSSL support on the
host system.
Since we clearly don't want to unconditionally depend on host-openssl,
we introduce a new option to explicitly enable the dependency on
host-openssl. This is exactly identical to the existing
BR2_TARGET_UBOOT_NEEDS_DTC, for the dependency on host-dtc. It is
therefore the responsibility of the user to enable this option if his
board configuration uses CONFIG_FIT_SIGNATURE=y.
Necessary to fix bug #9316.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of pppd with toolchain using Linux 4.8
headers. The patch has been taken from a pull request pending on the
Github project, which is unfortunately somewhat dead.
The fix is not the most beautiful one, but it does the job, in a piece
of source code that's anyway rather messy in terms of mixing userspace
headers and kernel headers.
Fixes:
http://autobuild.buildroot.net/results/bdc4f274e527c5aebf9bd1b2ca85ba8e7da57e9d/
and numerous similar other build failures
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For packages that use a version control repository rather than a pre-made
tarball, the directory prefix used inside the tarball is currently
FOO_BASE_NAME, which can be 'foo' or 'host-foo'.
This means that the hash of such tarball will be different for target and
host packages, even though the contents are exactly the same. Hence, if the
hash file is created based on 'foo', and later a fresh build is made where
'host-foo' happens to be built before 'foo' (with a different config, for
example), the hash will be detected as incorrect and a new download is
started.
This problem does not affect many packages/users, due to the number of
conditions to be met:
- the package should be available for target _and_ host
- the package needs to use a VCS download method, e.g. git, hg, svn, ...
This does not include standard github downloads, which download a pre-made
archive.
- there should be a hash file containing the hash of the downloaded archive.
Since normally there is no hash file for packages with sources coming from
a version control system, this restricts even further. Some examples of
packages in this category that do have a hash file (but not necessarily
match the earlier conditions): expedite, vexpress-firmware, squashfs, ...
- the archive needs to be stored in a 'primary site' after initial archiving
and thus be downloaded later using a non-version-controlled method, like
wget or scp. This is because the version control download methods do not
receive a '-H' parameter pointing to the hash file and thus no hashes are
checked at all even if the file is present.
While packages matching the third condition could be considered to be 'wrong'
and need to be fixed, it does actually makes sense to have a hash file for
packages from version control, in particular if they are stored in a
primary site as mentioned in the last condition.
Regardless of any different opinions on the previous paragraph, it is also
not conceptually correct that a tarball of a package source can contain a
Buildroot-specific directory prefix 'host-'. Therefore, use
FOO_RAW_BASE_NAME instead of FOO_BASE_NAME when calling the dl-wrapper.
Example test scenario that exhibits the problem:
$ rm -rf /tmp/dl dl/squashfs-9c1db6d13a51a2e009f0027ef336ce03624eac0d.tar.gz
$ make qemu_x86_64_defconfig
$ make host-squashfs-dirclean host-squashfs-source
$ mkdir /tmp/dl
$ mv dl/squashfs-9c1db6d13a51a2e009f0027ef336ce03624eac0d.tar.gz /tmp/dl/
$ sed -i -e 's,BR2_PRIMARY_SITE=.*,BR2_PRIMARY_SITE="file:///tmp/dl",' \
-e '/BR2_PRIMARY_SITE/aBR2_PRIMARY_SITE_ONLY=y' .config
$ make host-squashfs-dirclean host-squashfs-source
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit fa6feff (wireshark: needs the qt5tools lrelease utility)
introduced a circular dependency chain in Kconfig:
package/qt5/qt5base/Config.in:118:error: recursive dependency detected!
package/qt5/qt5base/Config.in:118: symbol BR2_PACKAGE_QT5BASE_GUI is selected by BR2_PACKAGE_QT5TOOLS_PIXELTOOL
package/qt5/qt5tools/Config.in:19: symbol BR2_PACKAGE_QT5TOOLS_PIXELTOOL depends on BR2_PACKAGE_QT5TOOLS
package/qt5/qt5tools/Config.in:1: symbol BR2_PACKAGE_QT5TOOLS is selected by BR2_PACKAGE_QT5BASE_WIDGETS
package/qt5/qt5base/Config.in:131: symbol BR2_PACKAGE_QT5BASE_WIDGETS is selected by BR2_PACKAGE_QT5X11EXTRAS
package/qt5/qt5x11extras/Config.in:1: symbol BR2_PACKAGE_QT5X11EXTRAS depends on BR2_PACKAGE_QT5BASE_XCB
package/qt5/qt5base/Config.in:186: symbol BR2_PACKAGE_QT5BASE_XCB depends on BR2_PACKAGE_QT5BASE_GUI
Fix that by dropping the select on the Qt5Tools, and introduce an
intermediate kconfig-level variable to represent the new condition, to
simplify the .mk file.
That would make the condition for enabling/disabling the GUI to be a
little bit more complex by adding yet another (long-ish) variable.
So we also introduce an intermediate kconfig-level variable that
represent the condition to enable the GUI.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Free Electrons sponsored the Buildroot Developers Meeting at ELCE 2016
in Berlin by making a donation to IN-Berlin, the organization who hosted
the 3-day event.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the Free Electrons logo of the Buildroot website to
the new logo of the company.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While fixing
http://autobuild.buildroot.net/results/d95/d9572bcafc1776eebe88bbcaf031a05cd6ee4b23/
by using http://patchwork.ozlabs.org/patch/674337/ the build stopped at
a later stage with
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_add_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_sub_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_fetch_or_1'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_compare_exchange_4'
/home/buildroot/br4/output/build/vlc-2.2.4/src/.libs/libvlccore.so: undefined reference to `__atomic_exchange_1'
collect2: error: ld returned 1 exit status
so libatomic must be pulled in if necessary.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Output of get-developers script in our manual uses --cc for developers,
but actual output of get-developers script uses --to. This patch makes
code consistent with documentation, by using --cc for developers.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The commandline paramter to enable/disable postgresql support is
called '--with-pgsql/--without-pgsql' and not '--with-postgresql/
--without-postgresql'.
Fixes [1] in case postgresql development files are installed on the host:
checking for PostgreSQL... testing
checking autodect pgsql headers... yes /usr/include/postgresql
checking autodect pgsql libs... /usr/lib64
checking for PQconnectStart in -lpq... no
configure: error: PostgreSQL support can't build without PostgreSQL libraries
[1] http://autobuild.buildroot.net/results/749/7497730da2affffe0e5b9b790081de10c269f416
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-march=m6201 is not yet supported in GCC upstream, so disabling all
versions when selecting this core.
Note that M6201 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for M6201 as
well.
The external Codescape IMG GNU Linux Toolchain has support for this
core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For consistency use 'libraries' and 'program' as component names and
adjust license string for readability when we conditionally specify
license for server program.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
library libdtc is dual licensed under BSD-2c or GPLv2+ and dtc programs
are licensed under GPLv2+.
This patch annotates licenses with components and uses correct format to
specify dual licensing that is separating licenses with 'or' keyword
instead of '/'.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While BR2_EXTERNAL_<NAME>_PATH was already documented, it was not
made obvious that it could be reused in post-biuld, post-image and
in-fakeroot scripts.
The BR2_EXTERNAL_<NAME>_DESC variable was not documented at all.
Update the manual to fix this.
Note: a2x chokes on this:
.Note:
Both +BR2_EXTERNAL_$(NAME)_PATH+ and +BR2_EXTERNAL_$(NAME)_DESC+ are
available [...]
and spits out a totally useless error message:
a2x: ERROR: "xsltproc" --stringparam toc.section.depth 1 --stringparam
callout.graphics 0 --stringparam navig.graphics 0 --stringparam
admon.textlabel 1 --stringparam admon.graphic 0 --stringparam
chunk.section.depth 0 --output "/home/ymorin/dev/buildroot/O/docs/manual/manual.html"
"/etc/asciidoc/docbook-xsl/xhtml.xsl"
"/home/ymorin/dev/buildroot/O/docs/manual/manual.xml" returned
non-zero exit status 6
So, we had to resort to using different quoting styles for each
variables. They are not semantically equivalent, but the rendering
is the same with the default CSS (which we are using). That's gonna
be good-enough for now...
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we support multiple br2-external trees, BR2_EXTERNAL is no
longer exported in the environment.
This means that post-build scripts in a br2-external tree can no longer
find their own files (well, they could re-invent the path by stripping
their known-relative path, but that'd be ugly, especially since we can
very well provide it).
Export the path for each br2-external trees as environment variables.
Do so for the description as well, as a courtesy.
Also, re-order variable definitions to be more logical: first, purely
internal variables, then exported variables.
Reported-by: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Benoît Allard <benoit.allard@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When $(CURDIR) and/or $(O) contain symlinks in their paths, they can be
resolved differently, depending on each package build-system (whether it
uses the given paths or get the absolute canonical ones).
Using absolute canonical paths will help achieving reproducible builds and
will make easier tracking down host machine paths leaking into the host,
target or staging trees.
So, this change ensures the build takes place with the CURDIR and O
variables are set to their absolute canonical paths.
In order to recall the toplevel makefile with absolute canonical paths
for $(CURDIR) and $(O), we need to:
1- Compute the absolute canonical paths for $(CURDIR) and $(O) that will
be passed to the sub-make. This is achieved using the 'realpath' make
primitive. However, some care must be taken when manipulating O:
- the out-of-tree makefile wrapper happens a trailing "/.", we need
to strip this part away to not break the comparison driving the
sub-make call;
- the user can leave a trailing '/' to $(O);
- according to [1,2], realpath returns an empty string in case of
non-existing entry. So, to avoid passing an empty O= variable to
sub-make, it is necessary to define the output directory and create
it prior to call realpath on it (because on the first invocation,
$(O) usually does not yet exists), hence the trick doing the mkdir
right before calling realpath.
2- Update EXTRAMAKEARGS with the absolute canonical $(O) and use it
when call recalling the top-level makefile with umask and paths
correctly set.
3- Lastly, update the condition for setting the CONFIG_DIR and
NEED_WRAPPER variables.
Note:
* This change takes care of the makefile wrapper installed in $(O) to
avoid unneeded make recursion.
[1] https://www.gnu.org/software/make/manual/html_node/File-Name-Functions.html
[2] http://man7.org/linux/man-pages/man3/realpath.3.html
Reported-by: Matthew Weber <matt@thewebers.ws>
Cc: Matthew Weber <matt@thewebers.ws>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change only moves things around and comments what is done in the
top-level Makefile file, in order to prepare the next changes.
Note that moving the definition of $(O) before or after re-entering make
does not change anything on the buildroot behavior.
This change also renames the variable UMASK to REQ_UMASK.
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change uncorrolates the CONFIG_DIR and NEED_WRAPPER definition from
the presence of the O variable in the command line.
Now, the condition used to set these variables is the value of O itself.
This change is a preparatory work since the O definition will need to
be moved around when we will make Buildroot run with absolute canonical
paths for both its root directory and the output location.
This will be addressed in a follow-up patch.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes an issue introduced in commit
ac16793eaa. This commit creates a link
$(@D)/bin/python pointing to the host Python 2, and adds $(@D)/bin/ to
the PATH. However, the QT5WEBKIT_INSTALL_TARGET_CMDS variable copies the
contents of $(@D)/bin/ to the target filesystem, in order to install
binaries produced by the qt5webkit build. By doing this, we overwrite
the 'python' symbolic link on the target.
In order to fix this, we simply create the 'python' symbolic link used
to trick qt5webkit to use python2 on the host in the $(@D)/host-bin/
sub-directory.
Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing following build failures with musl:
* error: unknown type name __uint32_t and __uint64_t
* error: unknown type name pid_t and uid_t
* error: fatal error: bits/sockaddr.h: No such file or directory
it fails with
fds/files.c: In function 'file_tree_callback':
fds/files.c:172:10: error: 'FTW_CONTINUE' undeclared (first use in this function)
return FTW_CONTINUE;
^
fds/files.c:172:10: note: each undeclared identifier is reported only once for each function it appears in
fds/files.c:178:10: error: 'FTW_SKIP_SUBTREE' undeclared (first use in this function)
return FTW_SKIP_SUBTREE;
^
fds/files.c:185:10: error: 'FTW_STOP' undeclared (first use in this function)
return FTW_STOP;
^
fds/files.c: In function 'open_fds_from_path':
fds/files.c:197:26: error: 'FTW_ACTIONRETVAL' undeclared (first use in this function)
int flags = FTW_DEPTH | FTW_ACTIONRETVAL | FTW_MOUNT;
As per ftw man-page, flag FTW_ACTIONRETVAL is specific to glibc. It is
not available on musl. Since package uses it unconditionally, we mark
it not available on musl.
Fixes:
http://autobuild.buildroot.net/results/cb4/cb4a665746652679487dee2c2e4bca881be3724b/
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select ext4 as root file system as the genimage config expects ext4 not ext2.
Tested on beaglebone, beagleboneblack and AM335x EVM
[Peter: reworded slightly]
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fwup configure.ac uses PKG_CHECK_MODULES(), and we're
autoreconfiguring this package, so we should depend on host-pkgconf.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When even a single extra util-linux utility is enabled, the default
build and install will install many more programs, including many that
overlap with those offered by busybox.
Fix by reworking the install-utilies menu to take advantage of the new
--disable-all-programs config option. This option make it possible to
disable the basic set of apps, and then enable only the desired apps.
Original patch by Danomi Manchego, visible at
http://patchwork.ozlabs.org/patch/494866/
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas/Arnout: remove the choice between all/custom/no, and simply have
a list of options with the basic set of tools, and then one option for
each tool. This gives the same flexibility, but avoids the choice, which
is never nice to have.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add option to control installation of libfdisk
- Add libfdisk license to the comment in util-linux.mk
- List all utilities provided by the basic set and document that
linux32, linux64, uname26, i386 and x86_64 are symlinks to setarch
- Add options to install cal, ipcrm, ipcs, logger, lslogin and pg
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: add missing dependency of the new lslogins option on
libsmartcols, and therefore !MMU.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix several problems in the package recipe:
- Make 'bool "lib<foo>"' the first item in each block
- Move the depends before the selects
- Add missing dependencies on BR2_USE_MMU, for fork()
- Improve help for cramfs utilities and login utilities
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- remove capitalization of prompts, for consistency
- add missing dependencies on libsmartcols, and therefore !MMU]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gzip's configure uses $SHELL to find a POSIX-compliant shell to put in
the shebang of its shell scripts (zcat, gzexe, ...). However, we set
$SHELL to /bin/bash in the Makefile, which may not be present on the
target. We do make sure that /bin/sh always points to a valid shell on
the target so we can use that.
The configure discovery is completely broken for cross-compilation. The
same $SHELL is used during the build (it is used by make to run the
commands in rules) and on the target. Also, the checks for a valid
shell use the host shell, not the target shell.
We could try to patch gzip to fix that, but the checks can anyway not
be run for the target shell, so we'll have to override it with a cache
value anyway. So we can just as well do exactly that, without patching.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Pascal Speck <kernel@iktek.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested with Qemu 2.6.1 and qemu_aarch64_virt_defconfig and with
HOSTARCH set to x86 in the Buildroot main Makefile.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This Linaro release provide a new toolchain archive for i686 hosts, so update our
old 2014.09.
Tested with Qemu qemu-2.4.1-11.fc23 and with HOSTARCH set to x86 in the Buildroot
main Makefile.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also...
- Switch to GitHub.
- Remove LD=CC logic in libscsi.mk. This is now handled by the configure
script.
- Add patch to fix unsafe include paths issues. This patch has been sent
upstream as a pull request.
- Use a hook to create the m4 directory so autoreconf doesn't fail.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Docuement the new, optional desc: field for an external.desc file.
That part of the manual was starting to be a bit of a mess, so
reorganise it. Provide a complete br2-external tree example.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, it is not possible for a br2-external tree to override a
defconfig bundled in Buildroot, nor is it possible to override one from
a previous br2-external tree in the stack.
However, it is interesting that a latter br2-external tree be able to
override a defconfig:
- the ones bundled in Buildroot are minimalist, and almost always
build a toolchain, so a br2-external tree may want to provide a
"better" defconfig (better, in the sense "suited for the project");
- similarly for a defconfig from a previous br2-external tree.
But we can't do that, as the rules for the defconfigs are generated in
the order the br2-external trees are specified, all after the bundled
defconfigs. Those rule are patten-matching rules, which means that the
first one to match is used, and the following ones are ignored.
Add a new utility macro, 'reverse', inspired from GMSL, that does what
it says: reverse a list of words.
Use that macro to reverse the list of br2-external trees, so that the
latters win over the formers, and even over bundled ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only support at most one br2-external tree. Being able
to use more than one br2-external tree can be very useful.
A use-case would be for having a br2-external to contain the basic
packages, basic board defconfigs and board files, provided by one team
responsible for the "board-bringup", while other teams consume that
br2-external as a base, and complements it each with their own set of
packages, defconfigs and extra board files.
Another use-case would be for third-parties to provide their own
Buildroot packaging in a br2-external tree, along-side the archives for
their stuff.
Finally, another use-case is to be able to add FLOSS packages in a
br2-external tree, and proprietary packages in another. This allows
to not touch the Buildroot tree at all, and still be able to get in
compliance by providing only that br2-external tree(s) that contains
FLOSS packages, leaving aside the br2-external tree(s) with the
proprietary bits.
What we do is to treat BR2_EXTERNAL as a colon-separated (space-
separated also work, and we use that internally) list of paths, on which
we iterate to construct:
- the list of all br2-external names, BR2_EXTERNAL_NAMES,
- the per-br2-external tree BR2_EXTERNAL_$(NAME) variables, which
point each to the actual location of the corresponding tree,
- the list of paths to all the external.mk files, BR2_EXTERNAL_MKS,
- the space-separated list of absolute paths to the external trees,
BR2_EXTERNAL_DIRS.
Once we have all those variables, we replace references to BR2_EXTERNAL
with either one of those.
This cascades into how we display the list of defconfigs, so that it is
easy to see what br2-external tree provides what defconfigs. As
suggested by Arnout, tweak the comment from "User-provided configs" to
"External configs", on the assumption that some br2-external trees could
be provided by vendors, so not necessarily user-provided. Ditto the menu
in Kconfig, changed from "User-provided options" to "External options".
Now, when more than one br2-external tree is used, each gets its own
sub-menu in the "User-provided options" menu. The sub-menu is labelled
with that br2-external tree's name and the sub-menu's first item is a
comment with the path to that br2-external tree.
If there's only one br2-external tree, then there is no sub-menu; there
is a single comment that contains the name and path to the br2-external
tree.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the manual with the new external.desc mandatory file.
Take the opportunity to add a section listing all mandatory files,
Config.in, external.mk and the new external.desc, instead of just
hinting about them in the external package recipes section.
Change the examples to use the NAME-suffixed variable instead of the
raw BR2_EXTERNAL variable.
Change all references to BR2_EXTERNAL elsewhere in the manual to now
use the 'br2-external tree' terminology.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This unique NAME is used to construct a per br2-external tree variable,
BR2_EXTERNAL_$(NAME)_PATH, which contains the path to the br2-external
tree.
This variable is available both from Kconfig (set in the Kconfig
snippet) and from the .mk files.
Also, display the NAME and its path as a comment in the menuconfig.
This will ultimately allow us to support multiple br2-external trees at
once, with that NAME (and thus BR2_EXTERNAL_$(NAME)) uniquely defining
which br2-external tree is being used.
The obvious outcome is that BR2_EXTERNAL should now no longer be used to
refer to the files in the br2-external tree; that location is now known
from the BR2_EXTERNAL_$(NAME)_PATH variable instead. This means we no
longer need to expose, and must stop from from exposing BR2_EXTERNAL as
a Kconfig variable.
Finally, this also fixes a latent bug in the pkg-generic infra, where we
would so far always refer to BR2_EXTERNAL (even if not set) to filter
the names of packages (to decide whether they are a bootloader, a
toolchain or a simple package).
Note: since the variables in the Makefile and in Kconfig are named the
same, the one we computed early on in the Makefile will be overridden by
the one in .config when we have it. Thus, even though they are set to
the same raw value, the one from .config is quoted and, being included
later in the Makefile, will take precedence, so we just re-include the
generated Makefile fragment a third time before includeing the
br2-external's Makefiles. That's unfortunate, but there is no easy way
around that as we do want the two variables to be named the same in
Makefile and Kconfig (and we can't ask the user to un-quote that variable
himself either), hence this little dirty triple-inclusion trick.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we treat the case where we have no br2-external tree
(BR2_EXTERNAL is empty) differently from the case where we do have one
(BR2_EXTERNAL is not empty).
There is now no reason to treat those two cases differently:
- the kconfig snippet is always generated appropriately (i.e. it would
include the br2-external tree if set, or include nothing otherwise);
- we no longer have a dummy br-external tree either.
Also, the Makefile code to handle BR2_EXTERNAL is currently quite
readable if at least a little bit tricky.
However, when we're going to add support for using multiple br2-external
trees simultaneously, this code would need to get much, much more complex.
To keep the Makefile (rather) simple, offload all of the handling of
BR2_EXTERNAL to the recently added br2-external helper script.
However, because of Makefiles idiosyncracies, we can't use a rule to
generate that Makefile fragment.
Instead, we use $(shell ...) to call the helper script, and include the
fragment twice: once before the $(shell ...) so we can grab a previously
defined BR2_EXTERNAL value, a second time to use the one passed on the
command line, if any.
Furthermore, we can't error out (e.g. on non-existent br2-external tree)
directly from the fragment or we'd get that error on subsequent calls,
with no chance to override it even from command line.
Instead, we use a variable in which we store the error, set it to empty
before the second inclusion, so that only the one newly generated, if
any, is taken into account.
Since we know the script will always be called from Makefile context
first, we know validation will occur in Makefile context first. So we
can assume that, if there is an error, it will be detected in Makefile
context. Consequently, if the script is called to generate the kconfig
fragment, validation has already occured, and there should be no error.
So we change the error function to generate Makefile code, so that
errors are caught as explained above.
Lastly, when the value of BR2_EXTERNAL changes, we want to 'forget'
about the previous value of the BR2_EXTERNAL_MK variable, especially in
the case where BR2_EXTERNAL is now set to empty, so that we do not try
to include it later. That's why we first generate empty version of
BR2_EXTERNAL_MK, and then assign it the new value, if any.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we generate a kconfig snippet, we can conditionally include the
BR2_EXTERNAL's Config.in only when BR2_EXTERNAL is supplied by the user,
which means our empty/dummy Config.in is no needed.
As for external.mk, we can also include it only when BR2_EXTERNAL is
supplied by the user, which means our empty/dummy external.mk is no
longer needed.
Ditch both of those files, and:
- only generate actual content in the Kconfig snippet when we actually
do have a BR2_EXTERNAL provided by the user (i.e. BR2_EXTERNAL is not
empty);
- add a variable that contains the path to the external.mk provided by
the user, or empty if none, and include the path set in that variable
(make can 'include' nothing without any problem! ;-) )
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Julien CORJON <corjon.j@ecagroup.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the inclusion of br2-external's Config.in to the generated kconfig
snippet.
This will ultimately allow us to use more than one br2-external tree.
Offload the "User-provided options" menu to the generated Kconfig
snippet. We can also move the definition of the Kconfig-version of
BR2_EXTERNAL into this snippet.
We introduce an extra check that was not present in the previous code,
to check that we do have permission on that directory. Prevciously, it
was handled as a side effect of not being able to cd into there, but it
is cleaner to check it expressly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump includes
https://go.googlesource.com/go/+/a527bdbda39c48fa772d8d54eb6b849f240442c1
which fixes a gcc6-related compile error
cmd/6c
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c: In function 'gmove':
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c:995:28: error: left shift of negative value [-Werror=shift-negative-value]
f->vconst |= (vlong)~0 << 32;
^~
/home/buildroot/br2/output/build/host-go-bootstrap-1.4.2/src/cmd/6c/txt.c:1045:28: error: left shift of negative value [-Werror=shift-negative-value]
f->vconst |= (vlong)~0 << 32;
^~
cc1: all warnings being treated as errors
not yet caught by autobuilders using this defconfig:
http://autobuild.buildroot.net/results/394/394e22be0ef986463e97b3040dad8f978262732c/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The blind option BR2_GCC_SUPPORTS_GRAPHITE was used to distinguish gcc
versions that support the graphite loop optimizer. But since a while
already, all the versions we support do support graphite. So this symbol
isn't needed anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARC version of gcc does support graphite. It was probably just
forgotten when the BR2_GCC_VERSION_ARC symbol was introduced.
While we're at it, also remove a redundant newline.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: ARC Maintainers <arc-buildroot@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The blind option BR2_GCC_NEEDS_MPC was used to distinguish gcc versions
that rely on the mpc library and the ones that don't. But since a while
already, all the versions we support do need the mpc library. So this
symbol isn't needed anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ExtUtils::MakeMaker is one of the Perl Core modules usually packaged in
Perl package for a Debian/Ubuntu based system.
For a Fedora based system, each Perl Core modules have their own RPM
package. So install only Perl package is not enough.
Fixes:
>>> host-libxml-parser-perl 2.41 Configuring
[...]
perl `which perl` Makefile.PL
Can't locate ExtUtils/MakeMaker.pm in @INC (you may need to install the ExtUtils::MakeMaker module)
Add a new Perl module check in dependency.sh.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: François Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_DEPRECATED logic is a lot less useful than the legacy handling,
because the symbols just disappears without warning to the user. For
example, we had a few defconfigs that were using deprecated symbols
(which were not actually used because BR2_DEPRECATED wasn't set) so
these didn't build the expected code anymore.
Also, the idea behind BR2_DEPRECATED is that you can easily revive it
again if there is interest. However, it is relatively easy to revert
the removal of a package as well.
The deprecation is also more effort because it has to be removed twice:
once when deprecating, and once when really removing.
It doesn't make sense to add a legacy entry for BR2_DEPRECATED. Users
who actually used it will get legacy warnings instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We will remove BR2_DEPRECATED, so remove this deprecated option.
[Peter: drop binutils patches]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 doesn't work out of the box because the
u-boot-nand.img support has been removed.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Binutils was locked down to 2.24 because U-Boot 2014.01 didn't build
with more recent binutils. However, this doesn't work anymore because
binutils 2.24 is deprecated.
Current U-Boot 2016.09.01 does build successfully, but we don't have a
board anymore to test it.
Since updating U-Boot is generally not needed anyway, we just remove
the U-Boot support.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official `rapidxml` package release only supports up to GCC 4.6.x
for all capabilities. Implementers attempting to include the file
"rapidxml_print.hpp" will all result in a compilation failure when using
a currently supported Buildroot GCC version (all 4.7+ at this time).
With the provided patch, dependent packages will be able to use all of
rapidxml's capabilities using a generated toolchain from Buildroot (let
alone external toolchains).
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
[Thomas: rework patch so that it contains the proper line endings, and
applies properly without a pre-patch hook to convert the line endings
beforehand.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump kernel revision used by lego_ev3_defconfig to the latest tag from
ev3dev, as suggested by Peter. This is a 4.4 series kernel, which has the
added benefit of not necessitating a specific gcc to boot.
We need a patch to create an empty drivers/lego/Kconfig file for the build
to succeed though, as the ev3dev kernel normally expects a drivers tree to
be checked out there.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit
0924208839 ("configs/arm_juno: use 4.6
mainline kernel"), we're using a mainline kernel for the ARM Juno
board. But we're still fetching it from a Git repository, which is not
really efficient, so let's switch to use a tarball instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kodi segfaults as soon as it tries to load a python module:
Could not find platform independent libraries <prefix>
Consider setting $PYTHONHOME to <prefix>[:<exec_prefix>]
ImportError: No module named site
Segmentation fault
Turns out that keeping .py modules (with or without .pyc) fixes the
issue.
Currently, Kodi selects python, but since the format of modules is a
choice, we can not select it.
Fix that by inverting the dependency on python from Kodi:
- turn it into a depends rather than a select,
- add the dependency to ! pyc-only
- update the comment accordingly.
In addition, the !MMU and !static dependencies are updated since they
are no longer needed for Python (we now depend on it rather than
selecting it), but for other packages. The !MMU dependency is moved to
the _ARCH_SUPPORTS symbol as well.
Also, we can no longer "select BR2_PACKAGE_SAMBA4", because samba4
selects python, and we can no longer select python. Therefore, we switch
to a "depends on" dependency for samba4, which is fine as a user willing
to use Kodi with Samba will certainly realize that Samba should be
enabled.
Fixes bug #9221.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- update on latest master
- take care of the !MMU/!static dependencies.
- take care of the samba4 problem.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This configuration allows out-of-the box Digilent Zybo
support. It uses mainline U-boot and Linux kernel.
This configuration generates a SD card image named sdcard.img.
[Peter: rename genimage.cfg, cleanup post-image script, enable VFP support,
use 4.6 kernel headers and add tools needed by genimage]
Signed-off-by: Sebastien Van Cauwenberghe <svancau@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a target configuration for the beaglebone that supports the SGX530
graphics acceleration and builds the qt5 demos with the eglfs backend.
The imagination technologies demos and fbv are also included. The Linux
kernel is based on the omap2plus defconfig, a config fragment adds the
required settings for SGX accelerator support.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the target config for the beaglebone based on the
AM335x CPU. It also supports the beagleboneblack, the TI evm and evmsk.
Device tree blobs for am335x-evm, am335x-evmsk, am335x-bone,
am335x-boneblack will be built and a sd card image is created with a
post-image script. The kernel and driver versions match the
ti-processor-sdk 02.00.00.00. Patches allow the use of old AM335x evm
revisions (1 bit sd card) and JTAG debugging.
Kernel JTAG patch: By default the kernel will disable the JTAG clock,
access via the JTAG port will not work after the kernel booted. The
AM335x-evm has a JTAG header fitted, this patch keeps the JTAG clock
alive.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: remove 1-bit MMC patch, it's causing a significant performance
regression for users of BeagleBone, which are 99.99% of the users of
this defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc 5.x introduced a regression in the ARM build, which causes the
s-automata program to consume a very significant amount of RAM during
the gcc build. This causes numerous failures with our Travis-CI based
testing of defconfigs.
In order to address this, this commit backports a commit from the gcc
master branch, to both our gcc 5.x and gcc 6.x support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The wpa_supplicant was in fact no introduced by Peter, but by Gustavo,
and Gustavo is much more active in maintaining this package, so let's
mention Gustavo as the developer for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refering to package/gcc/gcc-initial and package/gcc/gcc-final was not a
good idea, as it doesn't notify when gcc patches are
added/removed/modified, so change this to package/gcc so that it catches
all changes.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from atfirmware to arm-trusted-firmware, in order
to match upstream.
- Remove option to apply custom patches. We no longer add such options,
and use the global patch directory instead.
- Rename the repo URL/version options, in order to not be Git specific,
in case support for fetching from other VCS is added later. This is
consistent with how other bootloaders handle this.
- Add license information.
- Do not add a weird dependency on the vexpress-firmware package in
Config.in. Instead, simply use it if it's available. Of course, some
configurations (such as the juno configuration) will fail to build if
vexpress-image is not enabled, but it's the responsibility of the
user to create a config that builds.
- Simplify misc aspects in the .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-march=p6600 is not yet supported in GCC upstream, so disabling all
versions when selecting this core.
Note that P6600 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for P6600 as
well.
The external Codescape IMG GNU Linux Toolchain has support for this
core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=i6400 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that I6400 implies a MIPS R6 CPU, and some GCC versions are already
disabled for R6, so we don't need to disable those ones for I6400 as
well.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=m5101 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that M5101 implies a MIPS R5 CPU, and some GCC versions are already
disabled for R5, so we don't need to disable those ones for M5101 as
well.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=m5100 support starts from GCC-6, so disable previous versions
when selecting this core.
Note that M5100 implies a MIPS R5 CPU, and some GCC versions are already
disabled for R5, so we don't need to disable those ones for M5100 as
well.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=interaptiv support starts from GCC-6, so disable previous
versions when selecting this core.
Also disable external toolchains that don't support this core.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=mips64r5 support started from GCC-5, so disable previous versions
when the CPU is R5.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-march=mips32r5 support started from GCC-5, so disable previous versions
when the CPU is R5.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By aggregating all the license files into a single big text-only file
means we have no way to use license files that are binary blobs (e.g.
pdf, rtf...).
Just do not generate that big file; if the user still wants it, it is
very easy to create it afterwards.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the SCP (System Control Processor)
firmware for the ARM reference platforms. There will most likely be
other SCP firmware provided by other vendors, but they might be provided
in a different form, so we for now create a vendor-specific package
named vexpress-firmware.
Since this firmware is used for booting, we create the package in boot/
and not in package/.
The package simply installs a single pre-built binary file into the
images directory.
Signed-off-by: Joao Pinto <jpinto@synopsys.com>
[Thomas:
- Rename the package from scpfirmware to vexpress-firmware.
- Add a Config.in prompt for the package.
- Remove the prompt-less Config.in options to select the Git repo and
version. Since we only support the Vexpress firmware, there's no need
for configurability here, so we just use the right Git repo/version
in the .mk file.
- Use $(INSTALL) -D to install the firmware file.
- Add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: add hash file, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fetch the source archive from fedora repository since this version of
the source is not available on the project site since it moved to
sourceforge.
Also add the md5 checksum computed by feodra to the *.hash file.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- With the release of BIND 9.11.0, ISC is changing the open source
license for BIND from the ISC license to the Mozilla Public License
(MPL 2.0). See release notes:
http://ftp.isc.org/isc/bind9/9.11.0/RELEASE-NOTES-bind-9.11.0.html
- Explicitly enable/disable zlib support, otherwise the configure script
will fail like this:
checking for zlib library... yes
checking for library containing deflate... no
configure: error: found zlib include but not library.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evince needs poppler-glib support (when poppler is enabled, for PDF
reading support), so add explicit handling to the package.
And poppler-glib requires cairo output, hence the conditional on both
libglib2 and cairo to enable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Hardcoded parameters are used for mysql user/directory.
Make S97mysqld source a /etc/default/mysql file where these
parameters can be overridden.
Signed-off-by: Eloi BAIL <eloi.bail@savoirfairelinux.com>
Tested-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Bump to mono 4.6.0.245
* Enabling previously disabled aot cause this version doesn't
compile without
* Fixing removed licensing file in mcs/COPYING.LIB
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useful for testing no-MMU ARM code in Qemu.
The newer Linux kernels with DT support for Qemu Versatile aren't yet
working, so use latest 4.4 kernel.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit ea161cf689.
The host-texinfo dependency is no longer used by any package, after using
another solution to the problem that required its introduction in the first
place.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The binutils/host-binutils package applied several tricks to avoid building
info documentation. In the worst case, host-texinfo is added as dependency.
However, there is a simpler solution that removes the need for all these
tricks: instruct the makefiles to use a dummy makeinfo command ('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 12306a81f8 (gdb: get rid of host-texinfo dependency) tried to
append MAKEINFO=true to the host/target make install arguments, but as the
default values for these are only added when (host-)autotools-package is
evaluated (and only if empty), this effectively drops the default values and
we ended up without the 'install' target and nothing got installed.
To fix this, specify the full install arguments.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
following commit 7de5b0d2d8, bump kernel
headers to 3.14.79 to match the kernel version.
We cannot use BR2_KERNEL_HEADERS_AS_KERNEL as some of their kernel
modifications causes glibc to fail to build.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pkg-config settings in HOST_CONFIGURE_OPTS and HOST_MAKE_ENV have
diverged over time, so they now use different _LIBDIR and
_ALLOW_SYSTEM_{CFLAGS,LIBS} settings.
Conceptually _CONFIGURE_OPTS should be a superset of _MAKE_ENV, so move the
definitions around and define _CONFIGURE_OPTS in terms of _MAKE_ENV instead
of repeating the individual settings.
Do this both for the target and host variant for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not necessary to update all mentioning of uClibc, but
at least we should point to the right homepage of the used
project.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Motion is a program that monitors the video signal from
cameras. It is able to detect if a significant part of
the picture has changed; in other words, it can detect motion.
https://motion-project.github.io
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop m68k-mcf5208 kernel patch since it's upstream.
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.8.1 2.6.0 YES OK (3)
arm_versatile 4.8.1 2.5.0 YES OK
arm_vexpress 4.8.1 2.5.0 YES OK
m68k_mcf5208 4.8.1 2.5.0 YES OK
m68k_q800 4.8.1 q800-v2.4.0 NO (2) OK
microblazebe 4.8.1 2.5.0 YES OK
microblazeel 4.8.1 2.5.0 YES OK
mips32r2el_malta 4.8.1 2.5.0 YES OK
mips32r2_malta 4.8.1 2.5.0 YES OK
mips32r6el_malta 4.8.1 2.6.0 YES OK (3)
mips32r6_malta 4.8.1 2.6.0 YES OK (3)
mips64el_malta 4.8.1 2.5.0 YES OK
mips64_malta 4.8.1 2.5.0 YES OK
mips64r6el_malta 4.8.1 2.7.0 YES OK (3)(4)
mips64r6_malta 4.8.1 2.7.0 YES OK (3)(4)
ppc_g3beige 4.8.1 2.5.0 YES OK
ppc_mpc8544ds 4.8.1 2.5.0 YES OK
ppc_virtex_ml507 4.8.1 2.5.0 NO OK
ppc64_pseries 4.8.1 2.5.0 YES OK
sh4 4.8.1 2.5.0 YES OK
sh4eb 4.8.1 2.5.0 NO (1) OK
sparc_ss10 4.8.1 2.5.0 YES OK
sparc64_sun4u 4.8.1 2.5.0 YES OK
sparc_sun4u 4.8.1 2.5.0 YES OK
x86 4.8.1 2.5.0 YES OK
x86_64 4.8.1 2.5.0 YES OK
xtensa_lx60 4.8.1 2.6.0 YES OK
xtensa_lx60_nommu 4.8.1 2.6.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-5423 - CASE/WHEN with inlining can cause untrusted pointer
dereference (bsc#993454).
CVE-2016-5424 - Fix client programs' handling of special characters in
database and role names (bsc#993453).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-5180 - ares_create_query single byte out of buffer write
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new wpa_supplicant command line argument -M can be used to describe
matching rules with a wildcard interface name (e.g., "wlan*").
This is very useful for systems without udev.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove patches applied upstream. As we are not touching configure.ac or
Makefile.am anymore there is no need for AUTORECONF.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the initial support for mx6q/dl udoo boards.
For information about these boards, please visit:
http://www.udoo.org/
In linux.fragment we disable USB support for now because kernel 4.8
hangs on udoo board.
This is been addressed by Peter Chen's kernel patch series that provides
a standard way to reset a USB hub.
When such series hit mainline, then we can bump the kernel and remove
linux.fragment.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since U-Boot supported SPL for Zynq boards at v2014.04 release, it
became much easier to build a system. At that time, however, users
still needed to manually copy ps7_init.c/h to the U-Boot source tree
to generate a working SPL image because ps7_init.c/h output from
Xilinx tools are not compatible with GPL.
Later, the license problem was solved when Xilinx tools became able
to output the GPL-compatible variants (ps7_init_gpl.c/h) as well.
U-Boot v2015.07 or later includes ps7_init_gpl.c/h for major Zynq
boards so that users can build a boot image straight away.
Now Buildroot supports 3 boards (Zedboard, MicroZed, ZC706) without
any manual intervention. This is a good thing itself, but commit
b9cd72cdbf ("zynq_zc706: bump U-Boot to xilinx-v2016.2") entirely
dropped the information about custom ps7_init files.
This commit provides up-to-date guidance for how to customize the
ps7_init files.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
[Thomas: rewording and formatting tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building sysklogd with glibc 2.24 fails with the following error:
syslogd.c: In function ‘reapchild’:
syslogd.c:2097:13: error: storage size of ‘status’ isn’t known
union wait status;
^
Makefile:99: recipe for target 'syslogd.o' failed
make[2]: *** [syslogd.o] Error 1
make[2]: *** Waiting for unfinished jobs....
package/pkg-generic.mk:201: recipe for target './buildroot/output/build/sysklogd-1.5.1/.stamp_built' failed
make[1]: *** [./buildroot/output/build/sysklogd-1.5.1/.stamp_built] Error 2
Makefile:41: recipe for target '_all' failed
make: *** [_all] Error 2
union wait was marked deprecated in glibc 2.23 and removed in glibc 2.24.
The fix is to declare it as an int.
See https://sourceware.org/ml/libc-alpha/2016-02/msg00342.html
Sent upstream via their mailing list
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 71c5a81c96.
The bump to libglib2 2.25.0 causes a large number of build failures due
to the redefinition of crc32() in both util-linux libblkid and
zlib. This commit is related to the bump, so it needs to get reverted as
well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/205463c9ea8651911972c2835e28ded1912c811ahttp://autobuild.buildroot.net/results/5e9279ee60c11a3dacacf6d78f87f8d1b92968f5http://autobuild.buildroot.net/results/97043f8defd5a59ae39b4c7f095a10d15c7fe632http://autobuild.buildroot.net/results/e775126d5939093289b1a833dd6323ac293322ed
.. and many more.
libmpdclient, libmicrohttpd and jsoncpp provide a .pc file. Use
pkg-config for detecting the libraries and for providing the necessary
details for compiling and linking.
The current build system of upmpdcli does not use PKG_CHECK_MODULES, but
AC_LINK_IFELSE to detect jsoncpp. After bumping jsoncpp version from
1.7.2 to 1.7.5 the detection fails, because the test program does not
compile anymore:
"""
In file included from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/autolink.h:9:0,
from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/json.h:9,
from test.c:1:
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:155:9:
error: 'int64_t' does not name a type
typedef int64_t Int64;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:156:9:
error: 'uint64_t' does not name a type
typedef uint64_t UInt64;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:158:9:
error: 'Int64' does not name a type
typedef Int64 LargestInt;
^
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/config.h:159:9:
error: 'UInt64' does not name a type
typedef UInt64 LargestUInt;
^
In file included from
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/json.h:10:0,
from test.c:1:
/usr/arm-buildroot-linux-gnueabi/sysroot/usr/include/json/value.h:184:11:
error: 'UInt64' in namespace 'Json' does not name a type
typedef Json::UInt64 UInt64;
[..]
"""
Instead of fixing the test program use PKG_CHECK_MODULES to check for
jsoncpp. While we're on it, add it for libmpdclient and libmicrohttpd,
too.
Upstream-status: https://github.com/medoc92/upmpdcli/pull/52
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-rtslib-fb and
python-configshell-fb should be bumped every time targetcli-fb is bumped
because upstream usually upgrades all of these packages at the same
time.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-rtslib-fb and targetcli-fb
should be bumped every time python-configshell-fb is bumped because
upstream usually upgrades all of these packages at the same time.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add a comment to indicate that python-configshell-fb and
targetcli-fb should be bumped every time python-rtslib-fb is bumped
because upstream usually upgrades all of these packages at the same
time.
Another comment warns that switching this package to PyPI would make us
miss new versions of python-rtslib-fb.
Signed-off-by: Christophe Vu-Brugier <cvubrugier@fastmail.fm>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit ea161cf689.
The host-texinfo dependency is no longer used by any package, after using
another solution to the problem that required its introduction in the first
place.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The binutils/host-binutils package applied several tricks to avoid building
info documentation. In the worst case, host-texinfo is added as dependency.
However, there is a simpler solution that removes the need for all these
tricks: instruct the makefiles to use a dummy makeinfo command ('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-texinfo dependency in gdb/host-gdb was added because gdb insisted
in building info documentation in recent versions, and we want to avoid
'makeinfo' to be present on the build system.
However, there is another solution that does not require actually building
host-texinfo: instruct the makefiles to use a dummy makeinfo command
('true').
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit e57ea511ee. As noted
by the original author of the package, Christophe Vu-Brugier, this
package should be updated together with python-configshell-fb and
python-targetcli-fb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Atop is an ASCII full-screen performance monitor for Linux.
- install only the basic functionality (command line tool atop).
- add patch to fix musl build by removing unused include of termio.h.
Patch was accepted upstream.
Support for extra functionality can be added by follow-up patches:
- init scripts (sysv and systemd) to autostart logging the system
activity.
- process accounting (needs counterpart enabled in the kernel).
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit fad58cefa4 ("boot/uboot: allow to build multiple U-Boot
images") the installation of SPL binary fails.
For example, when building the mx6cubox_defconfig target we see:
LD u-boot
OBJCOPY u-boot-nodtb.bin
COPY u-boot.bin
MKIMAGE u-boot.img
>>> uboot 2016.09.01 Installing to target
>>> uboot 2016.09.01 Installing to images directory
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.bin /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/u-boot.img /home/fabio/buildroot/output/images/
cp -dpf /home/fabio/buildroot/output/build/uboot-2016.09.01/SPL /home/fabio/buildroot/output/images/
cp: cannot stat '/home/fabio/buildroot/output/build/uboot-2016.09.01/SPL': No such file or directory
Instead of calling 'make all' only for the BR2_TARGET_UBOOT_FORMAT_DTB_IMG
case, call 'make all' unconditionally so that the SPL target can also
be installed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bfin workaround is not required if the gcc bfin patch is applied.
(gcc: enable _REENTRANT for bfin when -lpthread is used)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Firmware Test Suite (FWTS) is a test suite that performs sanity checks
on firmware. It is intended to identify BIOS and ACPI errors and if
appropriate it will try to explain the errors and give advice to help
workaround or fix firmware bugs.
libfdt (dtc) is an optional dependency as fwts checks for it during
configure, but will only disable a few tests (dt_base, dt_sysinfo) if it
is not available.
This has been build-tested in x86, x86_64 and aarch64 and run-tested in
x86_64 and aarch64 with EFI firmware.
This package has been limited to x86, x86_64 and aarch64 architectures
as it fails to build with linking errors related to ACPI functions when
building for other architectures. As it is less likely that this will be
used for the other architectures, they are disabled for now.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
[Thomas: add missing depends on for the Config.in comment, specify the
LGPL version in the license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
odroidc2's kernel remains based on 3.14. This commit upgrades the kernel
to a new commit that is now based on 3.14.79, and contains a number of
ODroidC2 related bug fixes and feature additions.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also move Openwide/SMILE down to the past sponsors. This also requires
all the row endings to move.
Note that I chose to mention Mind twice, once as current sponsor and
once as past sponsor.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
due to an issue with odroid's u-boot, compiling u-boot with
gcc 5.x will result in a non booting image.
so a gcc 4.9.x compiler must be used.
this solve bug #9326
thanks to Erico Nunes <nunes.erico@gmail.com> for pointing
to the right issue.
Reported-by: <gahabana@mail.com>
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the glibc 2.24-3, and this commit:
https://sourceware.org/git/?p=glibc.git;a=commit;h=80f87443eed17838fe453f1f5406ccf5d3698c25
fakeroot will print spurious message about symbols not being found.
[...]
dlsym(acl_get_fd): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_fd
dlsym(acl_get_file): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_file
dlsym(acl_set_fd): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_set_fd
dlsym(acl_set_file): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_set_file
dlsym(acl_get_fd): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_fd
dlsym(acl_get_file): /usr/lib/libfakeroot/libfakeroot.so: undefined symbol: acl_get_file
[...]
It doesn't seem to impair the behavior of fakeroot, it's simply annoying
for the user.
Debian (which is the creator of fakeroot) has a patch which is a
workaround: simply don't display the message.
Note if you wish to bump fakeroot:
A new version is available but the release tarball doesn't include the
'configure' and 'Makefile' pre-generated.
This means that if we were to bump, the package would need to run its
own 'bootstrap' script which will add dependencies to
host-{automake,autoconf,...} which would be annoying (since almost every
build runs fakeroot).
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
wnpa-sec-2016-56 - The Bluetooth L2CAP dissector could crash.
wnpa-sec-2016-57 - The NCP dissector could crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some Qt5 sub-projects as well as 3rd-party apps written on Qt
are failing to compile with gcc 6.x like that:
---------------------------->8-------------------------
In file included from XXX/output/host/usr/arc-buildroot-linux-uclibc/include/c++/6.2.1/bits/stl_algo.h:59:0,
from XXX/output/host/usr/arc-buildroot-linux-uclibc/include/c++/6.2.1/algorithm:62,
from XXX/output/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/include/qt5/QtCore/qglobal.h:88,
from XXX/output/host/usr/arc-buildroot-linux-uclibc/sysroot/usr/include/qt5/QtCore/qpair.h:37,
from qmediametadata.h:37,
from qmediametadata.cpp:28:
XXX/output/host/usr/arc-buildroot-linux-uclibc/include/c++/6.2.1/cstdlib:75:25: fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
^
compilation terminated.
---------------------------->8-------------------------
That happens because qmake trying to play smart passes some
include paths in Makefile with "-isystem" prefix.
Which in some cases lead to build failure well described in [1].
A little bit more details below on what really happens:
1. In "configure" script Qt determines default include paths of the
toolchain and stores them in DEFAULT_INCDIRS variable, see [2].
2. On qmake execution when it creates Makefile out of .pro-file
it parses headers in INCLUDEPATH variable and if a path matches
one in DEFAULT_INCDIRS then in CXXFLAGS that path is written
with $QMAKE_CFLAGS_ISYSTEM prefix, otherwise non-matching include
path ends up in CXXFLAGS with normal "-I" prefix.
3. By default for gcc "QMAKE_CFLAGS_ISYSTEM = -isystem", see [3].
4. gcc fails to find stdlib.h, again refer to Jörg's explanation in [1].
What we do here we force set QMAKE_CFLAGS_ISYSTEM to "" and so qmake
won't use "-isystem" any longer instead expected "-I" will be used for
all headers, see [4].
That fixes building of Qt5Webkit on ARM with gcc 6.x and a number of
autobuilder failures for ARC (the an arch that uses gcc 6 by default) like:
http://autobuild.buildroot.net/results/56a/56a6700774af692e7f5a99b452b15e4e8592310fhttp://autobuild.buildroot.net/results/697/697412b29bf031bf8f246cc3af97ebcbf6bf6d1b
[1] https://git.buildroot.net/buildroot/commit/?id=e79272fa7ff3d66c18de3514b912cd9d68d121a4
[2] http://code.qt.io/cgit/qt/qtbase.git/tree/configure?h=5.6.1#n3660
[3] http://code.qt.io/cgit/qt/qtbase.git/tree/mkspecs/common/gcc-base.conf?h=5.6.1#n47
[4] http://code.qt.io/cgit/qt/qtbase.git/tree/qmake/generators/unix/unixmake2.cpp?&h=5.6.1#n193
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Major changes since v1.3:
- A64/A80 support
- H3 fel speedup
- Fel readl/writel/sid/reset64 commands
- Fel progress bar support
- Nand-image-builder tool
- Linaro toolchain compatibility workaround
- Portability fixes
The build system has been reworked somewhat and extra compiler flags now
have to be passed in EXTRA_CFLAGS instead of CFLAGS, so we cannot use
{TARGET,HOST}_CONFIGURE_OPTS.
Instead explicitly pass the needed variables (CC and LDFLAGS).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elfutils libraries are GPLv2+ or LGPLv3+, standalone programs are GPLv3+
(see the NEWS file).
Make the GPLv3+ license tag/file dependant on the programs being
enabled, and make the GPLv2+/LGPLv3+ tag more descriptive.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Reviewed-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit e1a4b820ff.
As explained by François Perrad:
"""
perl-cross 1.1.0 is not mature (11 issues opened on september), it is
a full refactor, there are already 19 commits after this tag.
I never bump a perl version 5.x.0, I always wait the version 5.x.1
If you really need a perl 5.24.0, cross-compiled it with
perl-5.24.0-cross-1.0.3.
When I bump a perl version, I run on target the full Perl test suite
(~ 800 000 tests), and failures are not expected.
With cross-perl 1.0.3 and 1.1.0 tags, there have failures described in
https://github.com/arsv/perl-cross/issues/33
"""
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltp-testsuite was the only package to mention "non-musl" while all other
packages have it as "glibc or uClibc". This change only adjusts it to
look like all the other packages.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0001-fix-uClibc-build.patch is now part of upstream so it is not
needed in Buildroot anymore. The remaining patches were just rebased and
then renumbered so that they apply cleanly to this new version.
This has been build-tested with both glibc and uClibc toolchains and
run-tested on x86_64 and aarch64.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ltp-testsuite installs some of its files directly at its specified
prefix, which by default in Buildroot is /usr for autotools packages.
This is currently leaving scripts and its internal directories directly
installed in /usr, such as in:
# ls /usr
IDcheck.sh lib64 runltplite.sh share
Version libexec runtest testcases
bin runalltests.sh sbin testscripts
lib runltp scenario_groups ver_linux
It also seems to be not feasible to try to install all of its testcases
to standard locations such as /usr/bin as may contain hundreds of
binaries and may not be able to find them all if we change their install
locations. Therefore, it is better if ltp-testsuite installs its tree to
its own self-contained subdirectory.
Upstream instructions recommend that the install path be /opt/ltp,
however it seems that installing things to /opt is not a very common
Buildroot practice.
The proposal then is to install it to /usr/lib/ltp-testsuite and so it
can be run directly from there.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng015.
This tag introduces following changes:
1. binutils: Rebase onto upstream master.
2. gcc: Fix devdf3 emulation for arcem, disable TP register when
building for bare metal.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using the common board/freescale/common/post-image.sh can lead
to some good amount of simplification.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed patches:
* 0001-platform-move-link_get_user_ipv6ll_enabled-to-nm-platform-linux.patch:
no longer relevant (tested on 3.9 for raspberrypi)
* 0002-accept-auto-mode-interfaces.patch: accepted upstream
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar minimum gcc version dependency changed from 4.7 to 4.9 in the
last efivar bump, so this must be reflected in efibootmgr Config.in as
well.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed version numbering scheme since version 13, which
came after version 0.12.
There is now a make install target, so we can drop the manual file
installing. The make install target also installs the new efibootdump
tool.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has changed version numbering scheme since version 25, which
came after version 0.24.
The two patches that we had in package/efivar/ were backports and so can
be dropped with this bump.
This new version also fixes the build failure with gcc 6.x, so:
Fixes:
http://autobuild.buildroot.net/results/ea6/ea6968d5d0fd0d8ee64e045e2aa56c8e8a0b7b14
[Peter: require GCC 4.9+, adjust Config.in nvme.h comment]
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The MirOS Korn Shell is a quite complete posix shell implementation,
is rather small and supports vi mode properly.
[Peter: use mksh.1 as license file, use TARGET_CONFIGURE_OPTS, install -D]
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After update to uClibc-ng 1.0.18 transmission fails to
compile as the special treatment for sys/quota.h isn't required
anymore, because upstream synced with GNU libc to fix a samba4
compile problem.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
https://nodejs.org/en/blog/release/v6.7.0/
The patches from 6.2.1 have been copied to 6.7.0 with the following
changes:
- Add 0002-inspector-don-t-build-when-ssl-support-is-disabled.patch
to disable the new V8 inspector when openssl is not included.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reported via #buildroot, the newly activated locale
tool should only build for the target, not for the host.
Fix from upstream.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
acpitool requires threads.
However, it does not check for threads in its configure script, so
forgets to link with -pthreads, so fails to build in static-only
scenarii.
However, upstream has been dead for the past 7+ years now, so there is
not much point trying to fix this. Besides, a system with ACPI is most
probably a biggish system, so shared libs will probably be enabled, so
we just require shared libs.
As for bfin, the cryptic configure failure:
configure: error: C++ compiler cannot create executables
is due to the order in which AC_PROG_CXX and AC_PROG_CC are called.
Calling AC_PROG_CC first fixes this error message in this specific case.
However, this is a toolchain issue, as this does not occur for other
toolchains.
Still, inverting the call would anyway then cause linking errors:
/home/ymorin/dev/buildroot/O/host/usr/bin/bfin-linux-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o acpitool main.o acpitool.o ac_adapter.o toshiba.o asus.o thinkpad.o cpu.o battery.o freq.o -lgcc
acpitool.o: In function `Has_ACPI(char*)':
acpitool.cpp:(.text+0x1be): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Get_Kernel_Version(char*, int)':
acpitool.cpp:(.text+0x2aa): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Set_Kernel_Version()':
acpitool.cpp:(.text+0x43e): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Do_Fan_Info(int)':
acpitool.cpp:(.text+0x60a): undefined reference to `_Unwind_Resume'
acpitool.o: In function `Show_WakeUp_Devices(int)':
acpitool.cpp:(.text+0x770): undefined reference to `_Unwind_Resume'
acpitool.o:acpitool.cpp:(.text+0x9ca): more undefined references to `_Unwind_Resume' follow
/home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/../../../../bfin-buildroot-linux-uclibc/bin/ld: acpitool: hidden symbol `___udivsi3' in /home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/libgcc.a(_udivsi3.o) is referenced by DSO
/home/ymorin/dev/buildroot/O/host/opt/ext-toolchain/bin/../lib/gcc/bfin-buildroot-linux-uclibc/6.1.0/../../../../bfin-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
Again, because upstream is dead, there's not much point trying to fix
this... And since there's not many chances that a bfin board has ACPI,
we just disable acpitool for bfin.
Fixes various build failures:
http://autobuild.buildroot.org/results/6fc/6fc568228b7c5c5be9e35aae73fb09b431896325/http://autobuild.buildroot.org/results/f1e/f1eb711123c2d8aea8399b8984a007afec4f65fb/http://autobuild.buildroot.org/results/70e/70eb7d7ed93a122b4c7a9890877e721b8d777b00/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to 1.0.18
This includes all patches, so remove them.
Signed-off-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an out-of-bounds memory read in the ID3v2 parser for tags that
claim an unrealistically small length. This crashes mpg123 or any
application using libmpg123 with activated ID3v2 parsing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the main python-pyqt5 option is not visible when BR2_PACKAGE_QT
is enabled, the comment should also not be visibled when
BR2_PACKAGE_QT is enabled.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-7052 - Missing CRL sanity check
[Peter: drop CVE 6309 from description as pointed out by Baruch]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Package archive includes a proper licence file now, so use it instead of
a source file.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Here are the main U-Boot modifications:
- Add Spansion flash support
- Add secure boot (HAB) support
Here are the main Linux modifications:
- Add HDMI2CSI 75Hz support
- Add KD024FM display support
- Fix PCIe reset gpios in device tree
- Backport xhci fixes from mainline
- Fix SOM PHY address bug
- Enable IPU Prefetch engine for 6QP
- Fix ft5x06 touch bug
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With newer ARC toolchain obsolete -marcXXX were finally deperecated
and so compiler throws errors now about unknown option.
Solution is as simple as switching to more generic -mcu-XXX
options. Which we do. Unfortunately that change in upstream U-Boot [1]
happened right after v2016.09 was released an so we need to have that fix
for v2016.07 which is mentioned in axs10x defconfigs and for the latest
U-Boot release v2016.09 (which is selected by default if no defconfig is
used).
Once we deprecate either U-Boot version in U-Boot corresponding patch
should be removed essentially.
[1] http://git.denx.de/?p=u-boot.git;a=commit;h=7c8d81605302e7d7fdd3e7d8eb69302bddc64a2c
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: handle the U-Boot bump to 2016.09.01.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Most importantly this version includes a change to kvm-unit-tests which
means it will stop looking attempting to include host headers. This
change should fix build breakage on i386.
"ERROR: unsafe header/library path used in cross-compilation: '-I'
'/lib/modules/3.13.0-042stab111.12/build/include'"
The new version also includes more powerpc tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To prepare the addition of a Config.in comment for xvisor, and avoid the
repetition of the architecture dependencies, this commits adds a new
BR2_PACKAGE_XVISOR_ARCH_SUPPORTS hidden option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because each tool's individual .mk files is included from the top-level
Makefile and we also include them from linux-tools.mk, they get
registered twice, and thus built twice, and thus installed twice.
We did include them from linux-tools.mk to guarantee they would be
included early and each tool had a chance to register itself before we
were to construct the build and install hooks.
However, the ordering is _currently_ guaranteed, in the C locale by the
files names, which we anyway sort using make's $(sort) function, which
always sorts in the C locale.
Beware if we are to ever rename those files in the future...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the generated sdcard.img does not boot because U-Boot looks for
a zImage type of kernel instead of uImage.
Remove the generation of uImage, so that the sdcard.img can successfully
boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
https://www.openssl.org/news/secadv/20160922.txt
Fixes
SSL_peek() hang on empty record (CVE-2016-6305)
SWEET32 Mitigation (CVE-2016-2183)
OOB write in MDC2_Update() (CVE-2016-6303)
Malformed SHA512 ticket DoS (CVE-2016-6302)
OOB write in BN_bn2dec() (CVE-2016-2182)
OOB read in TS_OBJ_print_bio() (CVE-2016-2180)
Pointer arithmetic undefined behaviour (CVE-2016-2177)
Constant time flag not preserved in DSA signing (CVE-2016-2178)
DTLS buffered message DoS (CVE-2016-2179)
DTLS replay protection DoS (CVE-2016-2181)
Certificate message OOB reads (CVE-2016-6306)
Excessive allocation of memory in tls_get_message_header()
(CVE-2016-6307)
Excessive allocation of memory in dtls1_preprocess_fragment()
(CVE-2016-6308)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/2d5/2d55b5d88a06c7b8e6baeb96973009a451e992d9/http://autobuild.buildroot.net/results/899/89922e61c583cf1d11bd0bafdd5586c35d8f6e15/http://autobuild.buildroot.net/results/d5b/d5b8fe66ff8d9ea91e87ef6fbe8274f5e24aa7b0/http://autobuild.buildroot.net/results/89b/89b136e6dced6ca9842a1f23141b0cb999f783da/
.. and many more.
Building OLA with a GCC 6 cross-toolchain fails:
```
/usr/bin/arm-linux-g++ -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./include -I./include
-Wall -Wformat -W -isystem
/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include -pthread
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
-pthread -c -o libs/acn/e131_transmit_test.o
libs/acn/e131_transmit_test.cpp
/usr/bin/arm-linux-g++ -DHAVE_CONFIG_H -I. -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -I./include -I./include
-Wall -Wformat -W -isystem
/usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include -pthread
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os
-pthread -c -o libs/acn/E131TestFramework.o
libs/acn/E131TestFramework.cpp
In file included from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/ext/string_conversions.h:41:0,
from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/bits/basic_string.h:5402,
from
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/string:52,
from ./tools/ola_trigger/config.ypp:2:
/opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0/cstdlib:75:25:
fatal error: stdlib.h: No such file or directory
#include_next <stdlib.h>
^
compilation terminated.
```
The C++ library in GCC 6 now provides its own `<stdlib.h>` header that
wraps the C library header of the same name, so in `<cstdlib>` the
header include
```
#include <stdlib.h>
```
has become
```
#include_next <stdlib.h>
```
`#include_next` is sensitive to the order of directories in the
preprocessor's search path, so if that order is changed with `-isystem`
then the compiler can't find the right header:
```
[1] /usr/arm-buildroot-linux-gnueabihf/sysroot/usr/include
[2] /opt/ext-toolchain/arm-buildroot-linux-gnueabihf/include/c++/6.1.0
[..]
End of search list.
```
`<cstdlib>` is located in [2] whereas `<stdlib.h>` (C library header) is
in [1]. In this case, the `#include_next <stdlib.h>` statement in
`<cstdlib>`, located in [2], is evaluated **after** the search path [1],
so the compiler does not find the right system header.
The problem here is that the OLA build system replaces the `-I` in the CFLAGS
from libprotobuf with `-isystem` to fix some warnings treated as errors
in the libprotobuf header files.
`-isystem` should be used to suppress warnings in system headers only
and the libprotobuf header files are not system files.
The correct fix is to compile with less restrictions and remove
`-Werror` for the build. This is already done by passing
`--disable-fatal-warnings` to OLA.
Fix the reordering of the GCC search paths by removing the replacement of
`-I` with `-isystem`.
Upstream status: https://github.com/OpenLightingProject/ola/pull/1126
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default the build system of OLA passes '-Werror' to GCC. The aborts
compilation with GCC 6:
'''
error: ‘template<class> class std::auto_ptr’ is deprecated
[-Werror=deprecated-declarations]
'''
The target variant already passes the option "-disable-fatal-warnings"
to the build system to disable '-Werror'. Do it for the host variant to
to fix build with host GCC 6.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- configs/acmesystems_aria_g25_128mb_defconfig,
configs/acmesystems_aria_g25_256mb_defconfig :
update default configuration files for both 128MB and 256MB version
- board/acmesystems/aria-g25/genimage.cfg
board/acmesystems/aria-g25/post-image.sh :
add support for genimage in order to build sdcard.img
- board/acmesystems/aria-g25/readme.txt : update documentation
for Aria G25 and add notes about how to build sdcard.img
Signed-off-by: Biagio Montaruli <biagio.hkr@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Piotr Nakraszewicz no longer works at Imgtec, and Abhilash Tuse
volunteered to take care of this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The kernel source tree also contains the sources for various userland
tools, of which cpupower, perf or selftests.
Currently, we have support for building those tools as part of the
kernel build procedure. This looked the correct thing to do so far,
because, well, they *are* part of the kernel source tree and some
really have to be the same version as the kernel that will run.
However, this is causing quite a non-trivial-to-break circular
dependency in some configurations. For example, this defconfig fails to
build (similar to the one reported by Paul):
BR2_arm=y
BR2_cortex_a7=y
BR2_ARM_FPU_NEON_VFPV4=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com/raspberrypi/linux.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="26f3b72a9c049be10e6af196252283e1f6ab9d1f"
BR2_LINUX_KERNEL_DEFCONFIG="bcm2709"
BR2_PACKAGE_LINUX_TOOLS_CPUPOWER=y
BR2_PACKAGE_CRYPTODEV=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_LIBCURL=y
This causes a circular dependency, as explained by Thomas:
- When libcurl is enabled, systemd depends on it
- When OpenSSL is enabled, obviously, will use it for SSL support
- When cryptodev-linux is enabled, OpenSSL will depend on it to use
crypto accelerators supported in the kernel via cryptodev-linux.
- cryptodev-linux being a kernel module, it depends on linux
- linux by itself (the kernel) does not depend on pciutils, but the
linux tool "cpupower" (managed in linux-tool-cpupower) depends on
pciutils
- pciutils depends on udev when available
- udev is provided by systemd.
And indeed, during the build, we can see that make warns (it's only
reported as a *warning*, not as an actual error):
[...]
make[1]: Circular /home/ymorin/dev/buildroot/O/build/openssl-1.0.2h/.stamp_configured
<- cryptodev-linux dependency dropped.
>>> openssl 1.0.2h Downloading
[...]
So the build fails later on, when openssl is actually built:
eng_cryptodev.c:57:31: fatal error: crypto/cryptodev.h: No such file or directory
compilation terminated.
<builtin>: recipe for target 'eng_cryptodev.o' failed
Furthermore, graph-depends also detects the circular dependency, but
treats it as a hard-error:
Recursion detected for : cryptodev-linux
which is a dependency of: openssl
which is a dependency of: libcurl
which is a dependency of: systemd
which is a dependency of: udev
which is a dependency of: pciutils
which is a dependency of: linux
which is a dependency of: cryptodev-linux
Makefile:738: recipe for target 'graph-depends' failed
Of course, there is no way to break the loop without losing
functionality in either one of the involved packages *and* keep
our infrastructure and packages as-is.
The only solution is to break the loop at the linux-tools level, by
moving them away into their own package, so that the linux package will
no longer have the opportunity to depend on another package via a
dependency of one the tools.
All three linux tools are thus moved away to their own package.
The package infrastructure only knows of three types of packages: those
in package/ , in boot/ , in toolchain/ and the one in linux/ . So we
create that new linux-tools package in package/ so that we don't have to
fiddle with yet another special case in the infra. Still, we want its
configure options to appear in the kernel's sub-menu.
So, we make it a prompt-less package, with only the tools visible as
options of that package, but without the usual dependency on their
master symbol; they only depend on the Linux kernel.
Furthermore, because the kernel is such a huge pile of code, we would
not be very happy to extract it a second time just for the sake of a few
tools. We can't extract only the tools/ sub-directory from the kernel
source either, because some tools have hard-coded path to includes from
the kernel (arch and stuff).
Instead, we just use the linux source tree as our own build tree, and
ensure the linux tree is extracted and patched before linux-tools is
configured and built.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Paul Ashford <paul.ashford@zurria.co.uk>
[Thomas:
- fix typo #(@D) -> $(@D)
- fix the inclusion of the per-tool .mk files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I own a A20 Micro, I contributed the defconfig for it and I test it
still works from time to time.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elementary, libevas-generic-loaders and smtools3 no longer exist.
pygame doesn't exist, it's named python-pygame.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After commit ab930190d7 ("python-psutil: not available on musl")
we are getting following error when we set defconfig
package/python-psutil/Config.in:14: syntax error
package/python-psutil/Config.in:13: invalid option
package/circus/Config.in:21: syntax error
package/circus/Config.in:20: invalid option
Fixes: ab930190d7 ("python-psutil: not available on musl")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/365/365c2f0b32ae3cb1d6d4d8f0145500dfadd05c59/http://autobuild.buildroot.org/results/140/140d0ec9d94f75453c4c82e18803c8d7bffcf6be/
And many more.
The sysinfo structure definition in linux/sysinfo.h (which gets indirectly
included from linux/kernel.h) conflicts with the definition in sys/sysinfo.h
when building against the musl C library, leading to build failures:
arm-linux-gcc -Wno-unused-result -Wsign-compare -DNDEBUG -g -fwrapv -O3 -Wall -Wstrict-prototypes \
-D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -fPIC -DPSUTIL_VERSION=430 \
-c psutil/_psutil_linux.c -o build/temp.linux-x86_64-3.5/psutil/_psutil_linux.o
In file included from /home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/kernel.h:4:0,
from /home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/ethtool.h:16,
from psutil/_psutil_linux.c:35:
/home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/linux/sysinfo.h:7:8: error: redefinition of 'struct sysinfo'
struct sysinfo {
^
In file included from psutil/_psutil_linux.c:21:0:
/home/buildroot/build/instance-0/output/host/usr/arm-buildroot-linux-musleabihf/sysroot/usr/include/sys/sysinfo.h:10:8: note: originally defined here
The suggested solution by the musl developers is to duplicate the needed
structures and defines inline instead of including the kernel headers, which
is unlikely to be acceptable upstream - So instead mark python-psutil (and
its reverse dependencies) as unavailable on musl.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
efl and matchbox no longer have a subdirectory containing multiple
packages, so they are no longer good examples of that. Mention qt5 and
gstreamer instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- adjust the license: it's MIT or LGPLv2, add web/license.html to the
license files
- rewrap Config.in help text
- add entry to the DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the contribute.txt part of the manual to tell
people to use get-developers to get the appropriate "git send-email"
command when sending patches.
[Peter: use --cc instead of --to as suggested by Yann/Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is an initial list of Buildroot developers. It has been created
semi-automatically by parsing the Git history, and finding the authors
of commits with a title like "<foo>: new package". Some additional
manual tweaking has been done (merging multiple entries corresponding to
the same person, adding some more entries, etc.).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script, and its companion library, is more-or-less Buildroot's
equivalent to the kernel get_maintainer.pl script: it allows to get the
list of developers to whom a set of patches should be sent to.
To do so, it first relies on a text file, named DEVELOPERS, at the root
of the Buildroot source tree (added in a followup commit) to list the
developers and the files they are interested in. The DEVELOPERS file's
format is simple:
N: Firstname Lastname <email>
F: path/to/file
F: path/to/another/file
This allows to associate developers with the files they are looking
after, be they related to a package, a defconfig, a filesystem image, a
package infrastructure, the documentation, or anything else.
When a directory is given, the tool assumes that the developer handles
all files and subdirectories in this directory. For example
"package/qt5/" can be used for the developers looking after all the Qt5
packages.
Conventional shell patterns can be used, so "package/python-*" can be
used for the developers who want to look after all packages matching
"python-*".
A few files are recognized specially:
- .mk files are parsed, and if they contain $(eval
$(<something>-package)), the developer is assumed to be looking after
the corresponding package. This way, autobuilder failures for this
package can be reported directly to this developer.
- arch/Config.in.<arch> files are recognized as "the developer is
looking after the <arch> architecture". In this case, get-developer
parses the arch/Config.in.<arch> to get the list of possible BR2_ARCH
values. This way, autobuilder failures for this package can be
reported directly to this developer.
- pkg/pkg-<infra>.mk are recognized as "the developer is looking after
the <infra> package infrastructure. In this case, any patch that adds
or touches a .mk file that uses this infrastructure will be sent to
this developer.
Examples of usage:
$ ./support/scripts/get-developers 0001-ffmpeg-fix-bfin-build.patch
git send-email--to buildroot@buildroot.org --to "Luca Ceresoli <luca@lucaceresoli.net>" --to "Bernd Kuhls <bernd.kuhls@t-online.de>"
$ ./support/scripts/get-developers -p imx-lib
Arnout Vandecappelle <arnout@mind.be>
Gary Bisson <gary.bisson@boundarydevices.com>
$ ./support/scripts/get-developers -a bfin
Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc 4.9.4 was the last release of the 4.9.x branch, and the gcc
developes will now only be maintaining gcc 5.x and 6.x:
https://gcc.gnu.org/ml/gcc-announce/2016/msg00002.html
Therefore, it is time to use gcc 5.x as the default version in
Buildroot. We have been having toolchains in the autobuilders with gcc
5.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a necessary dependency to build the new host-libglib2.
libblkd is an indirect dependency for libmount.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARC gcc version is now based on gcc 6.x and no longer gcc 4.8.x,
which makes the option BR2_GCC_VERSION_4_8_ARC a bit irrelevant, as is
the prompt of this option.
This commit therefore renames this option to BR2_GCC_VERSION_ARC, and
adjust its prompt as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new version brings in support for egl-wayland, the EGL extensions
aimed at making it possible to implement Wayland servers and clients. As
such, nvidia-driver becomes the second EGL implementation in Buildroot
that can act as a libegl provider with egl-wayland extensions.
In this version, it becomes possible to use our kernel-module infra,
with just a little few minor tricks: we need just specify the Linux
source and build trees (they are the same for us) and the list of
modules to build. We still need a little patch against the Kbuild files.
We also get rid of the LIBS_NO_VERSION trick and always use complete
filenames, as more libs are now packaged with different version in their
filenames, and even some with no version at all.
When installing libs, we switch from a shell loop to a make foreach
loop, which is easier to handle. It has the side-effect (and advantage)
of displaying the install commands for each library, rather than a
single biggish one, so it is easier to see what goes wrong. This also
means that an error in each phase of the install (the copy of the files
then each symlink) can be caught more easily (it was not previously):
each sequence is now its own make command; we need not use "|| exit 1"
after each command, even in a if block, because the if blocks returns
with the exit code of the last command in it; e.g. if an ln fails, the
if-block in which it is enclosed will return the exit code of ln, and
make will catch it.
Similarly for the X driver modules and each of the programs installed:
we now can catch any failure in the isntall of those.
All of this somewhat simplifies the .mk. It is a little bit longer, but
the structure is saner and more explicit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is a follow-up for
999d4a2631
libGL.so and support files are not only available with DRI drivers but
also with Gallium drivers, in fact mesa3d can be built without any
driver enabled - unless X.org is disabled it will provide libGL.so.
Tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_XORG7=y
Fixes
http://autobuild.buildroot.net/results/d97/d97a80e6de066a7dea08b284eab24fc44b11d661/
kodi-visualisation-waveforhue detects OpenGL installed by mesa3d but the
kodi package itself does not select libglew before because mesa3d was
not listed as a provider for libgl in the buildroot build system.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Christian Stewart <christian@paral.in>
[Atul:
- Updated the default to empty.
- Updated the license to GPLv2.
- Used patches instead of SED commands.
- CC and LD are replaced by TARGET_CC and TARGET_LD.]
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
[yann.morin.1998@free.fr:
- drop the headers_install command
- instead, instruct the kernel to install them
- add patches 0002..0004
- properly build the host tools
- don't depend on the aufs extension, for kernel already patched
- fix comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas:
- Remove the patch 0004-no-override-readdir64.patch, since it no longer
applies to the latest version of aufs-util. Instead, add a post-patch
hook that tweaks the Makefile to remove the problematic rdu64.o from
the build process.
- Use directly the kernel headers from the kernel source tree, rather
than having to install them. This only requires a minor trick to
define "__user" to empty.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Christian Stewart <christian@paral.in>
[Atul:
- Removed the duplicate conditional block.
- Updated the license to GPLv2.
- Removed the visibilty of package from menuconfig.
- Removed dependencies.
- Removed the comment.
- Changed the name of variable from BR2_PACKAGE_AUFS_STANDALONE_VERSION
to BR2_LINUX_KERNEL_EXT_AUFS_VERSION.
- Removed the AUFS_INSTALL_STAGING and AUFS_INSTALL_TARGET variables.
- Removed the BR2_PACKAGE_AUFS_3X and BR2_PACKAGE_AUFS_4X variables.]
Signed-off-by: Atul Singh <atul.singh.mandla@rockwellcollins.com>
[yann.morin.1998@free.fr:
- do not fail on version check if aufs ext is disabled
- check for empty version
- squash aufs package and linux extension in one patch
- fail if the kernel already has aufs support
- simplify handling of version]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas:
- Fix the apply patch logic, it was using a non-existent
AUFS_VERSION_MAJOR variable. BR2_PACKAGE_AUFS_SERIES is used
instead.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warp7 has a BRCM43430 Wifi chipset. Add support for it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable has been unused for a long time, so we can get rid of its
definition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We used to do a special handling of Linux kernel modules when stripping
target binaries because there's some special precious data in modules
that we must keep for them to properly operate. This is for example true
for stack unwinding data etc.
It turned out there're cases when our existing "strip --strip-unneeded"
doesn't work well. For example this removes .debug_frame section used by
Linux on ARC for stack unwinding, refer to [1] and [2] for more details.
Now Linux kernel may strip modules as a part of "modules_install" target
if INSTALL_MOD_STRIP=1 is passed in command line. And so we'll do
allowing kernel decide how to strip modules in the best way.
Still note as of today Linux kernel strips modules uniformly for all
arches with "strip" command, so this commit alone doesn't solve
mentioned problem but it opens a possibility to add later a patch to the
kernel which will strip modules for ARC differently - and that's our
plan for mainline kernel.
[1] https://github.com/foss-for-synopsys-dwc-arc-processors/toolchain/issues/86
[2] http://lists.busybox.net/pipermail/buildroot/2016-September/172161.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Daniel Mentz <danielmentz@google.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sam-ba binary is distributed under a proprietary license. TCL and some
applets code is under a BSD-2c like license, while some other applets are
under BSD-4c.
Also correct license files.
Cc: Ludovic Desroches <ludovic.desroches@atmel.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When linking statically with -lreadline we also need to specify
-lcurses. We were already passing LIBS=-intl to fix gettext related
issues, so we refactor how LIBS is passed so that several values can be
passed.
It is worth mentioning that:
1. Passing LIBS= at configure time is not sufficient, because the
configure script does LIBS="" at its end. So in order for the LIBS
value to also be effective during the build, it needs to be passed
in MAKE_OPTS as well.
2. LIBS=-lintl was only passed at build time (it was not needed for any
of the configure tests). However, LIBS=-lncurses is needed both at
configure time (for configure tests) and at build time. Therefore,
the new variable UTIL_LINUX_LIBS gets passed as the LIBS value at
both configure time and build time.
Fixes:
http://autobuild.buildroot.net/results/70e0a273e699c73c6b2ab2a19c8f7ebb1ddee6cdehttp://autobuild.buildroot.net/results/6a7faf8adbffd9437c0117b9f0e89684c24dad23
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The unit tests are tiny guest operating systems that generally execute
only tens of lines of C and assembler test code in order to obtain its
PASS/FAIL result. Unit tests provide KVM and virt hardware functional
testing by targeting the features through minimal implementations of
their use per the hardware specification. The simplicity of unit tests
make them easy to verify they are correct, easy to maintain, and easy
to use in timing measurements. Unit tests are also often used for
quick and dirty bug reproducers. The reproducers may then be kept as
regression tests. It's strongly encouraged that patches implementing
new KVM features are submitted with accompanying unit tests.
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas:
- order architecture dependencies in Config.in alphabetically.
- rewrap Config.in help text, lines were too long
- add an empty line between the package description and the upstream
project URL in the Config.in help text
- don't make KVM_UNIT_TESTS_ARCH default to $(ARCH). This was not
correct for i386 for example. Instead, just handle the few
architectures that the package supports.
- remove useless double quotes in variable definitions.
- remove --prefix="$(TARGET_DIR)" from CONF_OPTS. It was installing
everything in /share/ and not /usr/share/, and setting the prefix to
TARGET_DIR at configure time is not good. Instead, pass DESTDIR at
installation time.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- enable BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS in raspberrypi3_defconfig
- add copy of rpi-firmware/overlays directory to boot partition in genimage-raspberrypi3.cfg
- enhance post-image.sh script to add 'dtoverlay=pi3-miniuart-bt' on request
- add BR2_ROOTFS_POST_SCRIPT_ARGS="--add-pi3-miniuart-bt-overlay" in raspberrypi3_defconfig
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the execution of its configure script, Python 3 tries to find an
available "hg" installation, and if available, will try to use it to get
information from the version control system. To do this, it tries to
communicate over the network, potentially over ports that are blocked,
causing the build to halt. This was reported by a user as part of bug
7802.
To solve this, we simply make the Python script use /bin/false as the
"hg" program.
Fixes bug #7802 for the python3 package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During the execution of its configure script, Python tries to find an
available "hg" and "svn" installation, and if available, will try to use
them to get information from the version control system. To do this, it
tries to communicate over the network, potentially over ports that are
blocked, causing the build to halt. This was reported by a user as part
of bug #7802.
To solve this, we simply make the Python script use /bin/false as the
"hg" and "svn" programs.
Fixes bug #7802 for the python package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is responsible from downloading and deploying bitstream for
TS-4900's FPGA. It implements clocks, UART MUX, and GPIOs. One of these
GPIOs is used to enable the wifi module.
It is loaded by U-Boot during the boot sequence, the default U-boot
script expects to find it in the /boot folder.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
[Thomas:
- Use "config" instead of "menuconfig" since there's a single option
and no sub-options.
- Add BR2_arm dependency, since it's only used on a specific i.MX6
platform.
- Implement TS4900_FPGA_EXTRACT_CMDS that copy the file to the package
build directory $(@D)
- Change the install command to copy from $(@D) instead of from
$(DL_DIR)
- Change the install command to remove the 'mkdir -p
$(TARGET_DIR)/boot' and instead just use the -D option of the install
program that creates the destination directory if it doesn't exist.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, like libbsd, use -isystem flags to provide so-called
overrides to the system include files. In this particular case, this
is used in a .pc file, then used by antoher package; pkgconf does not
mangle this path; and eventually that other package ends up using
/usr/include/bsd to search for headers.
Our current toolchain wrapper is limited to looking for -I and -L, so
the paranoid check does not kick in.
Furthermore, as noticed by Arnout, there might be a bunch of other
so-unsafe options: -isysroot, -imultilib, -iquote, -idirafter, -iprefix,
-iwithprefix, -iwithprefixbefore; even -B and --sysroot are unsafe.
Extend the paranoid check to be able to check any arbitrary number of
potentially unsafe options:
- add a list of options to check for, each with their length,
- iterate over this list until we find a matching unsafe option.
Compared to previously, the list of options include -I and -L (which we
already had) extended with -idirafter, -iquote and -isystem, but leaving
all the others noticed by Arnout away, until we have a reason for
handling them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Current, we only display the path that causes the paranoid failure. This
is sufficient, as we can fail only for -I and -L options, and it is thus
easy to infer from the path, which option is the culprit.
However, we're soon to add a new test for the -isystem option, and then
when a failure occurs, we would not know whether it was because of -I or
-isystem. Being able to differentiate both can be hugely useful to
track down the root cause for the unsafe path.
Add two new arguments to the check_unsafe_path() function: one with the
current-or-previous argument, one to specify whether it has the path in
it or not. Print that in the error message, instead of just the path.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Toolchains using glibc-2.18 or older do not define O_TMPFILE, which
causes build failures on some archs.
systemd has a definition for O_TMPFILE if it is missing, but only
defines it for i386 or x86_64. Furthermore, the header defining it is
not included everywhere O_TMPFILE is used.
Fix that with three patches backported from upstream:
- include the needed header where it is needed (he!),
- define O_TMPFILE for all archs, according to linux-4.8rc3,
- no longer guard against undefined O_TMPFILE in fileio.
Upstream merge commit:
4a13100c6a
Fixes:
http://autobuild.buildroot.net/results/b0067e72ffcbbe1db9ef49ab297cece951345aeb/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it is desired to build multiple U-boot images. E.g. one to
save into flash memory and one for serial load. So far this was not
possible.
This change allows to select any combination of the target formats. They
are all copied to the image folder.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
[Thomas:
- Handle the BR2_TARGET_UBOOT_FORMAT_BIN, which wasn't handled, and
therefore u-boot.bin was not copied when
BR2_TARGET_UBOOT_FORMAT_BIN=y.
- Rename UBOOT_BIN to UBOOT_BINS, since it can now contain multiple
values.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- add --disable-elput in the !BR2_PACKAGE_EFL_ELPUT case
- add missing dependency on libxkbcomm]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to enable graphic acceleration using OpenGL or OpenGLES with efl
libraries.
The full OpenGL option depend on X11, because full OpenGL means GLX,
which means X11. Also select efl xlib support when full OpenGL is
selected.
Enable OpenGL ES when EGL API is enabled, otherwise the build fail with
this error:
configure: error: OpenGL ES requires EGL, please add --enable-egl to your configure options to switch to EGL + OpenGL ES.
With the upcomming Wayland support in EFL Buildroot packaging,
OpenGL ES support is recommended.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- use a single ifeq/else ifeq/else ifeq/endif block
- remove the "default" for the choice, move the "none" choice at the
end, and simply rely on the first choice having its dependencies met
being automatically enable by kconfig. So OpenGL first, then
OpenGLES, and then none.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the .config contains invalid configuration *(e.g. two providers for
a same virtual package), it is not possible to run "make distclean"
because the .config file is sourced and packages interpreted in this
case.
Add distclean to the noconfig list, so that we can run it in all cases.
However, this meand that DL_DIR is no longer set, and thus the default
download location never removed. We fix that by always removing the
download location, so that if it is the one configured we still remove
it (no change) and if it is not the one configured, we remove an
non-existing location and leave the user's location intact (no change
either).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently all cmake packages depend on host-cmake. Unfortunately
host-cmake takes a long time to configure and build: almost 7 minutes
on a dual-core i5 with SSD. The time does not change even with ccache
enabled.
Indeed, building host-cmake is avoidable if it is already installed on
the build host: CMake is supposed to be quite portable, and the only
patch in Buildroot for the CMake package seems to only affect
target-cmake.
Thus we automatically skip building host-cmake and use the one on the
system if:
- cmake is available on the system and
- it is recent enough.
First, we leverage the existing infrastructure in
support/dependencies/dependencies.mk to find out whether there's a
suitable cmake executable on the system. Its path can be passed in the
BR2_CMAKE environment variable, otherwise it defaults to "cmake". If
it is enabled, found and suitable then we set BR2_CMAKE_HOST_DEPENDENCY
to empty; otherwise we set BR2_CMAKE_HOST_DEPENDENCY to 'host-cmake' and
override BR2_CMAKE with "$(HOST_DIR)/usr/bin/cmake" to revert to using
our own cmake (the old behaviour).
Then in pkg-cmake.mk we replace the hard-coded dependency on host-cmake
to using the BR2_CMAKE_HOST_DEPENDENCY variable, and we use $(BR2_CMAKE)
instead of $(HOST_DIR)/usr/bin/cmake.
Unlike what we do for host-tar and host-xzcat, for host-cmake we do
not add host-cmake to DEPENDENCIES_HOST_PREREQ. If we did, host-cmake
would be a dependency for _any_ package when it's not installed on the
host, even when no cmake package is selected.
Cmake versions older than 3.0 are affected by the bug described and
fixed in Buildroot in ef2c1970e4 ("cmake: add patch to fix Qt mkspecs
detection"). The bug was fixed in upstream CMake in version 3.0 [0].
Amongst all the cmake packages currently in Buildroot, the currently
highest version mentioned in cmake_minimum_required() is 3.1 (grantlee
and opencv3).
Thus we use 3.1 as the lowest required cmake for now, until a package is
bumped, or a new package added, with a higher required version.
[0] https://cmake.org/gitweb?p=cmake.git;h=e8b8b37ef6fef094940d3384df5a1d421b9fa568
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr:
- simplify logic in check-host-cmake.mk;
- set and use BR2_CMAKE_HOST_DEPENDENCY, drop USE_SYSTEM_CMAKE;
- bump to cmake 3.1 for grantlee and opencv;
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new package provides Xvisor, an open-source type-1 hypervisor,
which aims at providing a monolithic, light-weight, portable, and
flexible virtualization solution.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- use MKIMAGE_ARCH instead of BR2_ARCH when calling mkimage
- use $(MKIMAGE)
- license is GPLv2+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kconfig clones, such as openconf used by xvisor [1], do not look for
.config at the root of the build directory, but in a subdirectory (e.g.
build/openconf).
This patch introduces a new Makefile variable named
$(2)_KCONFIG_DOTCONFIG, which contains the path to .config relative to
the source directory of the package. It defaults to .config and can be
overridden in the package Makefile.
It also creates the full directory hierarchy where the .config file is
stored, in case it does not exist (e.g. in xvisor).
This allows the use of the kconfig-package infrastructure with packages
relying on such clones.
[1] https://github.com/xvisor/xvisor/tree/master/tools/openconf
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use "install -D" instead of "mkdir + cp", as suggested by
Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, calling foo-reconfigure for a kconfig-based package will not
re-trigger the configuration (kconfig-wise) step for the package.
This can be problematic when using an override-srcdir suring development
and the content of the veride-srcdir changes (e.g. on a rebase, a merge,
or during a bisect).
This is because the configuration (kconfig-wise) of the package is not
done in the _CONFIGURE_CMDS block, but as a separate action that is not
part of any step [0].
So, be sure to remove the stamp file .stamp_kconfig_fixup_done during
the foo-clean-for-reconfigure rule, so that the configuration is applied
again with the new source tree.
We use another rule, foo-clean-kconfig-for-reconfigure, because we do
not want to override the default foo-clean-for-reconfigure rule, and we
have no way to add conditional commands to it.
[0] The reasons it was not done are not entirely clear in my head, but
IIRC that was not working at the time we tried with Thomas DS.
Reported-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building upmpdcli aborts because of an unsafe header inclusion of
`/usr/include/libupnpp`. Using `{prefix}` to get the header path is
wrong for cross-compilation.
Instead of hard-coding the flags for libupnpp use pkg-config to get the
correct ones.
Note that this patch adds the host-pkgconfig dependency unconditionally and
removes the necessity to pass the libupnpp manually to LIBS for a static
build.
Upstream-status: https://github.com/medoc92/upmpdcli/pull/49
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not directly obvious why we select pcre but not add it to the .mk
file, so add a comment to clarify.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcap-ng.so library is released under LGPLv2.1+ and programs testcap,
filecap, netcap and pscap are released under GPLv2+.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Programs are released under GPLv2+. README file says libraries
libaudit.* and libauparse.* are released under LGPL but there are two
files auparse/strsplit.c and lib/strsplit.c which are released under
GPLv2+ which makes both libraries GPL. Until we review situation with
upstream, we simply mention "unclear (libraries)".
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: add "unclear (libraries)" as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit upstream 51925b7dd6d0("package/audit: Bump to version 2.6.5")
removed patch 0002 as part of version bump. But forgot to disable
autoreconf.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
login and hwclock can be built with audit support. This patch adds
optional dependency on audit package if it is already selected.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fdisk and sfdisk tools can be built with readline support. This patch
adds optional dependency on readline if it is already selected.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And copy firmware for BCM43430 and BCM43438, hence rpi3 wifi support at
last.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit a0aa7e0e17 and reworks
the code to fix a major and potentially catastrophic bug when the
following conditions are met:
- The user has selected a "known toolchain profile", such as a Linaro
toolchain, a Sourcery CodeBench toolchain etc. People using "custom
toolchain profile" are not affected.
- The user has enabled BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y to
indicate that the toolchain is already locally available (as
opposed to having Buildroot download and extract the toolchain)
- The user has left BR2_TOOLCHAIN_EXTERNAL_PATH empty, because his
toolchain is directly available through the PATH environment
variable. When BR2_TOOLCHAIN_EXTERNAL_PATH is non-empty, Buildroot
will do something silly (remove the toolchain contents), but that
are limited to the toolchain itself.
When such conditions are met, Buildroot will run "rm -rf /*" due to
TOOLCHAIN_EXTERNAL_INSTALL_DIR being empty.
This bug does not exist in 2016.05, and appeared in 2016.08 due to
commit a0aa7e0e17.
Commit a0aa7e0e17 removed the assignment
of TOOLCHAIN_EXTERNAL_SOURCE and TOOLCHAIN_EXTERNAL_SITE to empty, as
part of a global cleanup to remove such assignments that supposedly
had become unneeded following a fix of the package infrastructure
(75630eba22: core: do not attempt
downloads with no _VERSION set).
However, this causes TOOLCHAIN_EXTERNAL_SOURCE to be non-empty even
for BR2_TOOLCHAIN_EXTERNAL_PREINSTALLED=y configuration, with the
following consequences:
- Buildroot downloads the toolchain tarball (while we're saying the
toolchain is already available). Not dramatic, but clearly buggy.
- Buildroot registers a post-extract hook that moves the toolchain
from its extract directory (output/build/toolchain-external-.../ to
its final location in host/opt/ext-toolchain/). Before doing this,
it removes everything in TOOLCHAIN_EXTERNAL_INSTALL_DIR (which
should normally be host/opt/ext-toolchain/).
Another mistake that caused the bug is commit
b731dc7bfb ("toolchain-external: make
extraction idempotent"), which introduce the dangerous call "rm -rf
$(var)/*", which can be catastrophic if by mistake $(var) is
empty. Instead, this commit should have just used rm -rf $(var) to
remove the directory instead: it would have failed without consequences
if $(var) is empty, and the directory was anyway already re-created
right after with a mkdir.
To address this problem, we:
- Revert commit a0aa7e0e17, so that
_SOURCE and _SITE are empty in the pre-installed toolchain case.
- Rework the code to ensure that similar problems will no happen in the
future, by:
- Registering the TOOLCHAIN_EXTERNAL_MOVE hook only when
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y, since moving the toolchain is
only needed when Buildroot downloaded the toolchain.
- Introduce a variable TOOLCHAIN_EXTERNAL_DOWNLOAD_INSTALL_DIR which
is the path in which Buildroot installs external toolchains when it
is in charge of downloading/extracting them. Then, the
TOOLCHAIN_EXTERNAL_MOVE hook is changed to use this variable, which
is guaranteed to be non-empty.
- Replace the removal of the directory contents $(var)/* by removing
the directory itself $(var). The directory was anyway already
re-created if needed afterwards. Thanks to doing this, if $(var)
ever becomes empty, we will do "rm -rf" which will fail and abort
the build, and not the catastrophic "rm -rf /*".
Reported-by: Mason <slash.tmp@free.fr>
Cc: Mason <slash.tmp@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to handle this return code, so just remove it.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we use a mainline kernel for wandboard, we no longer
need to select BR2_LINUX_KERNEL_CUSTOM_GIT, so remove it.
This fixes the following warning:
make wandboard_defconfig
/configs/wandboard_defconfig:19:warning: override: BR2_LINUX_KERNEL_CUSTOM_VERSION changes choice state
#
# configuration written to /home/fabio/buildroot/.config
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's now an sun8i-h3-orangepi-pc dts, so we can use that and drop the
hack in the post-image script.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MPM can be selected between event, prefork or worker
Set worker as the default one as it was before even if event MPM is
better on system supporting thread safe polling
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With kernel 4.8-rc5 we no longer need to use the "CONFIG_SMP=n" workaround
as the reboot issue has been fixed upstream by commit 059e232089e4
("irqchip/gic: Allow self-SGIs for SMP on UP configurations")
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though 4.8 is not released yet, some people may want to build a
system using the 4.8-rc kernel, and point to the kernel sources as the
kernel headers to use for the toolchain.
In order to make this possible, this commit adds support for specifying
4.8 as the kernel headers version, in both the internal and external
toolchain logic.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
[Thomas: remove support for 4.8 headers selection, and rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
warp7 is well supported in mainline U-Boot 2016.09, so switch
to this version.
As the current supported kernel is based on a 4.1 kernel from NXP,
use the "warp7_secure" U-Boot target as NXP kernel needs to boot
in secure mode.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make explicit that a ext4 rootfs is used.
As explained by Thomas Petazzoni:
"the ext4 filesystem is already used.
Indeed, the ext4 image is a symlink to the ext2 image, and the ext2
image is in fact an ext4 image:
-rw-r--r-- 1 thomas thomas 3763200 sept. 11 21:54 rootfs.ext2
lrwxrwxrwx 1 thomas thomas 11 sept. 11 21:54 rootfs.ext4 -> rootfs.ext2"
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CMakelist.txt tries to enable the cxx_long_long_type option,
even if the feature isn't available. (Which causes some builds to fail)
The included patch checks if the option is present before applying it.
The patch was backported from:
4dbb564619
Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After we simplified the libssh2 dependencies, the new dependencies were
not propagated to the php-ssh2 package, causing circular dependencies:
package/openssl/Config.in:1:error: recursive dependency detected!
package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_LIBSSH2
package/libssh2/Config.in:1: symbol BR2_PACKAGE_LIBSSH2 is selected by BR2_PACKAGE_PHP_SSH2
package/php-ssh2/Config.in:1: symbol BR2_PACKAGE_PHP_SSH2 depends on BR2_PACKAGE_OPENSSL
Just drop the now-useless dependency inherited from libssh2: libssh2 now
has no dependency.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by bug #9176 the current v4.6 kernel config
(used by Minnowboard MAX and Turbot) does not support
USB disks. Since this is a pretty essential functionality,
it's desirable to have it, so let's add the required options.
Kernel config linux-v3.8.config (currently used by the first
generation Minnowboard) doesn't need this change.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The boards imx6dlsabreauto, imx6dlsabresd, imx6qsabreauto, imx6qsabresd,
imx6sxsabresd were referring to board/freescale/create-boot-sd.sh for
the sdcard image generation.
This commit:
* Removes board/freescale/create-boot-sd.sh
* Uses the common Freescale genimage template instead.
The offset of the first partition was 1MB in the script and is
modified to 8MB in the template.
* Fixes the readme.txt file accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the boards imx6ulevk, imx6sabresd, mx25pdk, mx51evk, mx53loco,
warpboard:
* Replace genimage.cfg with a common Freescale genimage template named
genimage.cfg.template because they all use the same layout. The only
difference comes from the device tree blobs.
* Replace each post-image.sh script with a generic post-image.sh script
which is able to generate the right genimage.cfg depending on:
** the image type (zImage or uImage) from BR2_LINUX_KERNEL_UIMAGE
** the device tree blobs from BR2_LINUX_KERNEL_INTREE_DTS_NAME
** the rootfs type (ext2, ext3 or ext4) from BR2_TARGET_ROOTFS_EXT2
* Fix the readme.txt files accordingly
Signed-off-by: Georges Savoundararadj <savoundg@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: remove handling of rootfs type, using rootfs.ext2 in all cases
is fine, rootfs.ext3 and rootfs.ext4 are just symbolic links to it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The latest version of binutils, 2.27, added in commit
b700157db4, fails to build on systems
that don't have makeinfo installed. This commit therefore applies the
same fixup as the one used for binutils 2.26, which consists in
touching all the .info files, so that they don't get rebuilt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh2 has
inherited the dependency from libgcrypt (propagated from libgpg-error).
However, since libssh2 can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.
But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.
Fix this dependenc byt doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 2f89476 (package/libgpg-error: bump to version 1.23), libssh has
inherited the dependency from libgcrypt (propagated from libgpg-error).
However, since libssh can use either openssl or libgcrypt as a backend,
the dependency should be relaxed when openssl is available.
But the test is broken and inverted: it will make libssh unavailable as
soon as openssl is enabled.
This in itself is already incorrect, but that can cause further issues,
as some packages (e.g. Kodi) will select (indirectly) openssl, and has
an option to select libssh; enabling that option causes unmet direct
dependencies of libssh:
warning: (BR2_PACKAGE_KODI_LIBSSH) selects BR2_PACKAGE_LIBSSH which
has unmet direct dependencies (BR2_USE_MMU && !BR2_STATIC_LIBS &&
BR2_TOOLCHAIN_HAS_THREADS && BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS
&& !BR2_PACKAGE_OPENSSL)
Fix this dependency by doing what other similar packages do: select
openssl if the other crypto backend (here libgcrypt) is not enabled.
This also allows us to drop the propagated dependency on the arch
condition.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jemalloc can be compiled with valgrind support being enabled
to produce proper output, so when the valgrind package has
been configured configure jemalloc appropriately.
In addition, make sure to disable valgrind support unconditionally in
the host variant of jemalloc.
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade U-Boot version to 2016.07 and make proper use of U-Boot
distro configuration features.
Provide a boot.scr binary script that is one of the standard ways to
pass a U-Boot script with distro features enabled.
With this method the uboot-env.txt file is no longer needed, so it is
removed.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wandboard is well supported in the mainline kernel, so let's switch
from the 3.14 vendor kernel to 4.7.3 mainline kernel version.
As mainline use more dts files to support both B1 and C1 versions of the
board, adjust the dts entries accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates libusb to version 1.0.20, and adds a patch that
should fix parallel make issues particular to this version and probably
fixed in the next version.
This commit also moves to using Github as the source for libusb.
Signed-off-by: Jeroen Roovers <jer@airfi.aero>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously they were set at next available version, which is problematic
since new syscalls can be introduced.
So switch to lower available.
There's a caveat for 3.1 and 3.0 headers though since there's no lower
than 3.2, so keep it at 3.2 for those unfortunately.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't force remounting / read/write when using a customskeleton and
systemd as init system, to fix the following unmet dependencies:
warning: (BR2_INIT_SYSTEMD) selects BR2_TARGET_GENERIC_REMOUNT_ROOTFS_RW
which has unmet direct dependencies (BR2_ROOTFS_SKELETON_DEFAULT)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate dependencies from freerdp to fix the following unmet
dependencies:
warning: (BR2_PACKAGE_WESTON_RDP) selects BR2_PACKAGE_FREERDP which has
unmet direct dependencies (BR2_INSTALL_LIBSTDCPP && BR2_USE_WCHAR &&
!BR2_STATIC_LIBS && BR2_TOOLCHAIN_HAS_THREADS && BR2_USE_MMU &&
BR2_TOOLCHAIN_HAS_SYNC_4)
Reorder deps to have architectures deps first.
Remove "broken" dependency from comment; add missing ones.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate dependencies from docker-containerd to fix the
following unmet dependencies:
warning: (BR2_PACKAGE_DOCKER_ENGINE_DAEMON) selects
BR2_PACKAGE_DOCKER_CONTAINERD which has unmet direct dependencies
(BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS &&
BR2_PACKAGE_HOST_GO_CGO_LINKING_SUPPORTS && BR2_TOOLCHAIN_HAS_THREADS &&
BR2_USE_MMU && BR2_USE_WCHAR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Properly propagate the Xenomai dependencies to the corresponding kernel
extension, to fix the following unmet dependencies:
warning: (BR2_LINUX_KERNEL_EXT_XENOMAI) selects BR2_PACKAGE_XENOMAI
which has unmet direct dependencies (BR2_PACKAGE_XENOMAI_ARCH_SUPPORTS
&& BR2_TOOLCHAIN_HAS_THREADS && !BR2_TOOLCHAIN_USES_MUSL)
While at it, move the comment lower, after the path option, so that the
path option is properly indented in the menuconfig.
Add markers to separate each extension.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to the latest (as of this writing) linux-firmware git version.
This adds support for newer iwlwifi firmware versions that are required
for newer kernel series.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches the galileo_defconfig to use the orignal Linux
kernel repo, which was used prior to commit
fc8cac962b.
Signed-off-by: Padraig Connolly <padraig.connolly@intel.com>
[Thomas: improved commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's been deprecated for quite a while and it's now replaced by the more
modern and up to date webkitgtk package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qemu buildsystem expects that the cpp it is passed can be called
like it were cc: it passes it the '-c' option, which is not allowed by
cpp, but is allowed for cc.
Fix that by overriding CPP when calling configure.
Note: the target variant of Qemu does not build the affected parts (the
PC-BIOS images). This is another problem that should be fixed separately.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-findfs and --enable-lsblk configure options don't exist
anymore. Now, findfs and lsblk are always built by default unless you
pass --disable-all-programs to the configure script.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building php, the package will also build/install phpdbg.
This patch explicitly disables this behaviour.
Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that 2.26.x is stable and there's 2.25.x to fallback for whatever
reason it makes no sense to keep two versions back from default.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport two upstream patches to fix a build failure on MIPS and SPARC
architectures when using recent binutils versions. It appears that on
these architectures pt-vfork.S includes vfork.S (through the alpha
version of pt-vfork.S) and that the __vfork aliases are not
conditionalized on IS_IN (libc) like on other architectures. Therefore
the aliases are also wrongly included in libpthread.so.
The build failure looks like this:
/br/output/build/glibc-2.22/build/nptl/libpthread.so:(*IND*+0x0):
multiple definition of `vfork@GLIBC_2.0'
/br/output/build/glibc-2.22/build/nptl/libpthread.so::(.text+0xeea0):
first defined here
This problem was reported in Debian here:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=827477
Upstream patches here:
https://sourceware.org/git/?p=glibc.git;a=commit;h=43c2948756bb6e144c7b871e827bba37d61ad3a3https://sourceware.org/git/?p=glibc.git;a=commit;h=b87c1ec3fa398646f042a68f0ce0f7d09c1348c7
I have tweaked them a little bit in order to not patch the ChangeLog
file, otherwise it will fail.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New version has been build- and run-tested on x86_64 and aarch64.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pugixml is a light-weight C++ XML processing library. It features:
* DOM-like interface with rich traversal/modification capabilities
* Extremely fast non-validating XML parser which constructs the DOM tree from an XML file/buffer
* XPath 1.0 implementation for complex data-driven tree queries
* Full Unicode support with Unicode interface variants and automatic encoding conversions
Homepage: http://pugixml.org/
Repository: https://github.com/zeux/pugixml
Signed-off-by: Theo Debrouwere <t.debrouwere@televic.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
1.6.23 tarballs have moved so, while we are at modifying libpng.mk, bump to 1.6.25.
[Peter: add back upstream sha1 hash]
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust some patches to avoid patching the ChangeLog which isn't quite
the same.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Mysql Native Driver has been the default mysql driver since
PHP 5.4, but buildroot was still using libmysqlclient.
Mysqlnd has several advantages such as improved memory management
and the more favorable PHP licensing terms.
(can combine it with proprietary PHP extensions like Ioncube
loader, while libmysqlclient requires commercial licensing if you
link to it and do not fall under their GPL/FOSS license exception)
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
expedite from 1.15 branch doesn't build anymore with efl 1.18 due to
API changes. Since there is no new release or 1.18 scpecific branch,
use the latest commit.
Add a hash file.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fix hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
elementary package is not used anymore, remove it.
Add a legacy entry.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: move the legacy entry at the right place.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevas-generic-loaders is now provided by efl package, so remove
libevas-generic-loaders package dependency.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to homepage download URL to get the smaller xz-compressed variant.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop all of the upstreamed patches (not precisely in the same form) and
rebase the only required patch for proper static builds with staging
libs required by other packages.
Build-tested for arm-glibc, arm-uclibc, arm-musl and arm-uclibc-static.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new patch does change behavior, but it was accepted by upstream and
could be removed on next version bump.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes a compile error not yet caught by autobuilders:
In file included from /home/bernd/buildroot/br2/output/build/kodi-pvr-vbox-15e864d160da5a051e18aef06f3a53e49808be02/src/client.cpp:24:0:
/home/bernd/buildroot/br2/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/kodi/xbmc_pvr_dll.h:423:63: error: 'SEEK_SET' was not declared in this scope
long long SeekLiveStream(long long iPosition, int iWhence = SEEK_SET);
^~~~~~~~
/home/bernd/buildroot/br2/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/kodi/xbmc_pvr_dll.h:510:67: error: 'SEEK_SET' was not declared in this scope
long long SeekRecordedStream(long long iPosition, int iWhence = SEEK_SET);
^~~~~~~~
CMakeFiles/pvr.vbox.dir/build.make:62: recipe for target 'CMakeFiles/pvr.vbox.dir/src/client.cpp.o' failed
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_BINUTILS_VERSION_2_26_X=y
BR2_GCC_VERSION_6_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_KODI_PVR_VBOX=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_XORG7=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fix from commit 26248571b6 ("micropython: fix build failures") was
applied upstream. This replaces the local buildroot fix with the patch
that was accepted upstream.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng011.
This engenering build contains the following updates:
1. rebase binutils on top of the latest upstream master
2. update GCC to version 6.2
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Upstream patches removed.
- Do not autoreconf since this was neecessary for one of those patches
that are now upstream. Also remove host-gettext dependency for the
same reason.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libjpeg and jpeg-turo are providers of the jpeg virtual package, so they
must declare themselves as such.
We do not have any problem, because the dependency is computed from the
Kconfig-defined option BR2_PACKAGE_PROVIDES_JPEG, and we do not check
the Makefile-defined <FOO>_PROVIDES variable.
For the sake of correctness, make both libjpeg and jpeg-turo declare
themselves as providers for the jpeg virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of depending on each provider of cryptodev, make openssl depend
on the virtual package.
This is easy because in both cases the openssl build systems needs the
same configuration options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cryptodev-linux and ocf-linux are providers of the cryptodev virtual
package, so they must declare themselves as such.
We do not have any problem for now, as the only consumer (openssl) of
both cryptodev-linux and ocf-linux did not depend on the virtual package
but on each provider. The other consumer is gnutls, but has only a
dependency on cryptodev-linux.
However, openssl can be turned into a proper consumer of the virtual
package, which would trigger the bug.
For the sake of correctness, make both cryptodev-linux and ocf-linux
declare themselves as providers for the cryptodev virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #8206, the mplayer configure script fails to detect
the availability of X11 header/library if the X.org development packages
are not installed on the build machine.
This is due to the logic used by the mplayer configure script, which
looks like this:
for I in $(echo $extra_cflags | sed s/-I//g) /usr/include ; do
if test -f "$I/X11/Xlib.h" ; then
_x11_headers="yes"
So, in other words, it:
1/ Parses the --extra-cflags option, and finds the -I options in there.
2/ Looks in /usr/include
Since $(STAGING_DIR)/usr/include is in the compiler built-in search path
for headers, we currently don't explicitly pass it in --extra-cflags, so
mplayer only looks in /usr/include. If you have X11 headers there thanks
to being installed on your build machine, everything works fine (the
rest of the build logic really uses the headers and libraries of the
cross-compiler). But if you don't have X11 headers in /usr/include, the
configure scripts assumes X11 is not available.
Since fixing the hand-written configure script of mplayer, hosted in a
Subversion repository, is beyond sanity, we simply work around this
problem by passing the appropriate -I$(STAGING_DIR)/usr/include option
in --extra-cflags.
Before this patch, during the configure script:
Checking for X11 headers presence ... no (check if the dev(el) packages are installed)
Checking for X11 ... no (check if the dev(el) packages are installed)
And then, the mplayer binary:
0x00000001 (NEEDED) Shared library: [librt.so.0]
0x00000001 (NEEDED) Shared library: [libz.so.1]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libdl.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libc.so.0]
With this patch, during the configure script:
Checking for X11 headers presence ... yes
Checking for X11 ... yes
And then, the mplayer binary:
0x00000001 (NEEDED) Shared library: [librt.so.0]
0x00000001 (NEEDED) Shared library: [libz.so.1]
0x00000001 (NEEDED) Shared library: [libpthread.so.0]
0x00000001 (NEEDED) Shared library: [libdl.so.0]
0x00000001 (NEEDED) Shared library: [libm.so.0]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXinerama.so.1]
0x00000001 (NEEDED) Shared library: [libXxf86vm.so.1]
0x00000001 (NEEDED) Shared library: [libc.so.0]
Fixes bug #8206
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current BR2_GCC_ENABLE_TLS can cause users to make incorrect
choices, and is not very useful. This options allows to decide whether
we pass --enable-tls or --disable-tls to gcc, to enable or disable
support for Thread Local Storage.
Its behavior is:
- The option is default to "y" but only exists if we're using
uClibc/NPTL or glibc.
- When we're using uClibc, the option can be disabled.
So, in practice, this means that currently:
- TLS support is always on for glibc
- TLS support is on by default for uClibc/NPTL, but can be disabled in
the configuration. This is in fact bad and causes the build failure
reported in bug #7424 (this bug is still reproducible on master)
- TLS support is always disabled for uClibc/no-thread and
uClibc/linuxthreads.
- TLS support is always disabled for musl. This does not cause any
build failure, but musl can use TLS support, and therefore be more
efficient. According to
http://www.openwall.com/lists/musl/2012/10/04/1, "Note that if you've
been building gcc with --disable-tls, __thread was already working
but gets emulated (very poorly; it's slow and will abort() if it runs
out of memory) through libgcc.".
So, this commit completely removes the BR2_GCC_ENABLE_TLS and instead
makes the right choice inside gcc.mk directly:
- TLS support enabled for glibc, musl and uClibc/NPTL
- TLS support in other cases, i.e uClibc/no-thread and
uClibc/linuxthreads.
We have intentionally *not* added the option to
Config.in.legacy. Indeed, the new behavior is *exactly* the same as the
older behavior, with the exception of:
- People can no longer disable TLS support in uClibc/NPTL, which was
anyway causing a build failure and therefore was not used.
- TLS support is now enabled on musl, but people using musl already had
BR2_GCC_ENABLE_TLS not set, so they wouldn't get the legacy warning.
Fixes bug #7424.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Back in 2005, in commit
a2c326396a ("update valgrind to the latest
and greatest"), an explicit --disable-tls option was added. More
recently, in commit 31a3f4bd54 ("valgrind:
enable tls support") changed this to be conditional on
BR2_GCC_ENABLE_TLS.
However, the configure script of valgrind is perfectly capable of
detecting TLS support, even in a cross-compilation case: it tries to
compile a program that uses __thread and sees if it works.
Since we're about to modify how BR2_GCC_ENABLE_TLS is handled, we'd
better remove its usage from packages, and valgrind is the only package
using this config option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng010.
This engenering build contains different fixes done to TLS and
PIE features. Appropriate custom patches are removed as they have
been added to eng010.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/928be69f90476e6b04be3a1afd3b74112bcac0a0
As mentioned in sha2/README, by default, tinydtls uses u_intXX_t data types
for 8 bit, 32 bit, and 64 bit unsigned integer type definitions. To use
uintXX_t data types as defined by recent ANSI C standards and as included in
the inttypes.h header file, SHA2_USE_INTTYPES_H has to be define at compile
time.
[Peter: reword/simplify]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling with a toolchain targetted at ucLinux, libserialport's
configure.ac would fail at detecting the target operating system.
As a result, the Linux-specific files were not compiled in that
particular case.
While this commit does not fix any autobuider failure for this package,
it fixes autobuilder failures for other packages, for instance:
http://autobuild.buildroot.net/results/69e/69e43bc171e554cf10f2ad526cebf5e0e524538a/
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sconeserver uses pkg-config macros and uses autoreconf, so it
unconditionally needs host-pkgconf.
[Peter: drop host-pkgconf from sub options, update description]
Reported-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 73da2ff6f7.
The reason for adding support for a local location was to be able to do
development on the Linux kernel source tree on a local directory rather
than have to clone it for every build.
We already have a mechanism for that, it's called override-srcdir. It's
been available since September 2011, more than a year before this patch
was committed.
Otherwise, we're going to be adding support for local sources in other
packages. First was U-Boot as submitted by Adam. But what next? We can't
have such support for all packages, especially since override-srcdir
does the job.
Besides, using a local source tree makes the build non-reproducible, so
we don't really want to have this in a .config (or defconfig).
We only handle the boolean option in legacy, as there is nothing we can
do with the directory path.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rafal Fabich <rafal.fabich@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The android-tools code is somewhat ugly, and defines its own u64 typedef
becore including kernel headers. Unfortunately, there are specific cases
where that doesn't work properly.
The android-tools code defines u64 as "unsigned long long", which is now
correct in the kernel. However, it used to be a time where u64 was
defined as "unsigned long" on a few 64 bits architecture (at least
PowerPC64 and MIPS64). The kernel headers have introduced a
__SANE_USERSPACE_TYPES__ macro that userspace can define in order to get
the "sane" definition, i.e "unsigned long long" for u64.
Unfortunately, this __SANE_USERSPACE_TYPES__ mechanism only appeared in
3.10 on PowerPC64, and in 3.16 on MIPS64.
Since android-tools is not using the autotools, and there's no easy way
to test types with the C pre-processor, we simply add some more
Config.in dependencies. They are a bit convoluted, but that's what the
dependency really is.
In our autobuilders, this issue was only showing up with an old MIPS64
toolchain that uses 3.9 kernel headers.
Also, since the problem is limited to the "fastboot" tool, the
dependency is only added for fastboot. Both adb and adbd build fine with
this toolchain.
Fixes:
http://autobuild.buildroot.net/results/ce45c995bd6abda6487ae3a11b4f45a7b9b3f8eb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to libiio 0.7, the systemd service file that used to be
in debian/iiod.service no longer exists. The entire debian/ directory
has been removed from the upstream project:
5d49f58982
Due to this, the installation of this service file fails, and causes
build failures. To address this, we simply remove the installation of
the systemd service file.
Fixes:
http://autobuild.buildroot.net/results/ce2fc81466abd9619aa104c96234d1455de3480d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-4590 - mishandles about: URLs, which allows remote attackers to
bypass the Same Origin Policy via a crafted web site.
CVE-2016-4591 - mishandles the location variable, which allows remote
attackers to access the local filesystem via unspecified vectors.
CVE-2016-4622 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site, a
different vulnerability than CVE-2016-4589, CVE-2016-4623, and
CVE-2016-4624.
CVE-2016-4624 - allows remote attackers to execute arbitrary code or
cause a denial of service (memory corruption) via a crafted web site, a
different vulnerability than CVE-2016-4589, CVE-2016-4622, and
CVE-2016-4623.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default Blackfin processor in Buildroot isn't supported by
gcc 6.1.0, so use bf532 as default. Disable any bf6xx processors
for internal toolchain users.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, a document can not have dependencies, except for the purely
internal ones (like checking asciidoc version, and presence of dblatex).
For our own manual, this will come in handy when we introduce a
generated kconfig snippet, so we can actually make the manual depend on
that snippet being generated first.
For external documents, it can be used to depend on host-packages if
need be (e.g. a custom host packages that generates specific media files
included in the manual).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some of those directories will be needed even during configuration, like
BUILD_DIR, where we'll store the generated kconfig snippet.
So, move the rule to create them outside the BR2_HAVE_DOT_CONFIG block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: fixup commit log, as noticed by Romain Naour.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all configurators depend on generating the out-of-tree
Makefile wrapper.
In an upcoming patch, we'll need to also generate a kconfig fragment,
so it will have to kick in before we run the configurators.
Introduce a new intermediate "prepare-kconfig" rule, so we can
commonalise the dependencies of the configurators. Move the dependency
on the Makefile wrapper to that new intermediate rule.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mark prepare-kconfig as a phony target.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The code for both cases is exactly the same, and only differs in the
location where defconfig files are looked for.
We use an intermediate macro to generate the corresponding rules,
because directly generating the rules is ugly and needs lots of escaping
and double-dollar-ing for the $(eval ...) and $(foreach ...) calls to
play nicely together.
Furthermore, that will be tremendously useful when we support multiple
br2-external trees.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: move comment outside of the make target, so that it isn't
displayed on stdout when loading a defconfig.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-utils.mk contains various definitions that are used in the package
infrastructures and packages themselves.
However, those definitions can be useful in other parts of Buildroot,
and are already used in a few places that are not related to the package
infrastructure. Also, $(sep) will be needed early in the Makefile when
we eventually support multiple br2-external trees.
Since this file only contains definitions, we can include it anytime.
So, consider that file to no longer be specific to the package infras:
- move it to support and rename it,
- move a few similar definitions from the main Makefile to that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With glibc 2.16, we get following build error when building jack2:
[193/247] cxx: tests/iodelay.cpp -> build/tests/iodelay.cpp.4.o
../tests/iodelay.cpp:171:43: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:171:55: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:172:44: error: 'UINT32_MAX' was not declared in this scope
../tests/iodelay.cpp:172:56: error: 'UINT32_MAX' was not declared in this scope
In glibc 2.17 or older version, Header <stdint.h> defines these macros
for C++ only if explicitly requested by defining __STDC_LIMIT_MACROS.
We can't use <cstdint> since it requires C++11 standard.
Fixes:
http://autobuild.buildroot.net/results/369ce208ffea43dad75ba0a13469159b341e3bf5/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The trousers code uses getpwent_r, which is not available in musl.
Detect the availability of getpwent_r in the trousers build system, and
use it conditionally.
This broke the build of tpm-tools because linking with libtspi.so
failed.
Fixes:
http://autobuild.buildroot.net/results/830fc20c68a0653afa5567edffc2ededc4e45cc6
Runtime-tested by running tpm_version in a chroot and verifying that it
creates a "user.data" file with both the Buildroot-provided CodeSourcery
and Musl toolchains on x86_64.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This was not noticed until now because:
1/ The older Blackfin toolchain doesn't have libatomic, so it didn't
provide the atomic operations that protobuf needs, so protobuf was
never built.
2/ The ARM Cortex-M toolchain is static-only, and protobuf requires
dynamic library support.
So it's only with the new Blackfin toolchain, which is based on gcc
6.x (and therefore provides libatomic) and is FDPIC-based (and therefore
has dynamic library support) that this problem appeared.
Since protobuf already has a BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS option,
we use it to add the BR2_USE_MMU dependency (which is architecture
related), which avoids the need to propagate the dependency.
Fixes:
http://autobuild.buildroot.net/results/2c1/2c151e84d7854a810465dc16869023e0ada2d586/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- move the BR2_USE_MMU dependency under
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS and remove the propagation to
reverse dependencies of protobuf, since they already depend on
BR2_PACKAGE_PROTOBUF_ARCH_SUPPORTS.
- improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pixman ARM optimized code assumes that ARM instructions are
available. Unfortunately, the configure.ac checks do not detect that the
platform is Thumb-only for Cortex-M builds, so it enables the ARM
optimizations, leading to failures like:
error: /home/test/autobuild/run/instance-3/output/host/usr/arm-buildroot-uclinux-uclibcgnueabi/sysroot/usr/lib/libpixman-1.a(pixman-arm-simd-asm-scaled.o): Conflicting CPU architectures 13/1
When building programs linked with pixman on Thumb-only
architectures. This is due to the fact that some object files in
libpixman-1.a are built for the ARM instruction set.
To resolve this, we give better hints to the pixman configure script
about which ARM optimizations to use: the ARM SIMD optimizations need at
least a CPU that supports ARM instructions, and obviously the ARM NEON
optimizations need NEON support.
Fixes:
http://autobuild.buildroot.net/results/54bee2ce382fcd067965d30f758f9d15514478d9/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add a comment above the --enable-arm-simd option, as suggested
by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of bumping vlc to git master (no vlc 3.x release yet) we use a
patch from deb-multimedia.org which provides the necessary changes for
ffmpeg 3.x support to vlc 2.2, compile-tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_FFMPEG=y
BR2_PACKAGE_FFMPEG_GPL=y
BR2_PACKAGE_FFMPEG_POSTPROC=y
BR2_PACKAGE_FFMPEG_SWSCALE=y
BR2_PACKAGE_VLC=y
This patch can be removed when vlc is bumped to 3.x.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option is needed to prevent this message from configure:
WARNING: unknown CPU. Disabling all MIPS optimizations.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- group with the other --cpu conditions so that only one is passed.
- improve the comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With a small patch, blktrace can work on uClibc: we simply need to link
with librt to use the posix_spawn*() functions.
[Thomas: add reference to upstream commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As recently discussed on lwn.net: https://lwn.net/Articles/695478/
The kernel has special behaviour for uid/gid 65534:
1. The kernel maps UIDs > 65535 to it when some subsystem/API/fs
only supports 16bit UIDs, but a 32bit UID is passed to it.
2. it's used by the kernel's user namespacing as the internal UID
that external UIDs are mapped to that don't have any local mapping.
3. It's used by NFS for all user IDs that cannot be mapped locally if
UID mapping is enabled.
Most distributions already map (or are in the progress of changing)
nobody/nogroup to the 65534 uid/gid, so lets do so as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As pointed out in bug #9161, we don't always have an inittab file (if
systemd or no init is used), so the post build script should only try to
tweak it if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default boa.conf we install specifies that boa should run under the
nobody group, but we don't have such a group in our default skeleton (and
boa doesn't add it), causing boa to fail to start:
[01/Jan/1970:00:00:10 +0000] No such group: nobody
Instead use the nogroup group, which is presumably what was meant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
configure.ac has AM_GNU_GETTEXT(), which will enable i18n if a gettext
library is found. For uClibc, it is found if the gettext package has
been built, and it will add -lintl to the link flags. For musl and
glibc, it is always found, in libc itself so nothing is added to the
link flags.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Matthew Weber <matt@thewebers.ws>
Tested-by: Matthew Weber <matt@thewebers.ws>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The source files in the domoticz tarballs have DOS line endings, which
don't appear when fetching the source code from Git. Therefore, a patch
generated from the Git repository doesn't apply directly on the source
code extracted from the tarball.
This commit fixes the patch so that it applies cleanly to the
tarball. Notice that the CMakeLists.txt file is not affected, only the
domoticz.cpp file uses DOS line endings.
While we're at it, we change the patch title prefix from [PATCH 1/1] to
just [PATCH].
Fixes:
http://autobuild.buildroot.net/results/a0539b3551d482411dd4bcd5c9b8c89f77e68475/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump runc to cc29e3dded8e27ba8f65738f40d251c885030a28
This version is required by Docker Engine v1.12.0.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6ad14a3687)
Bump docker-engine to the latest stable v1.12.0 from v1.12.0-rc3.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f892015d78)
domoticz.cpp currently assumes that on GNU/Linux systems header
<execinfo.h> is available. But that is not true. Since it provided by
C library and uClibc can be built without backtrace support. And in
such cases we get following build error.
domoticz-3.4834/main/domoticz.cpp:48:22: fatal error: execinfo.h: No such file or directory
#include <execinfo.h>
^
compilation terminated.
This commit adds patch for detecting presence of <execinfo.h>
and guards code accordingly.
Fixes:
http://autobuild.buildroot.net/results/393/393f839e160b51ca12ac36058718ad2f0c1b50a6/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When commit 031130a4 added the dependency on shared libs for FIT support
in uboot-tools, the dependency of the comment was added exactly as the
dependency of the symbol.
That means the comment is shown when FIT support is possible, and hidden
when it is not, while we want it the other way around...
Fix the dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reproducible build is only in its infancy; it is far from being
complete.
As such, move it to the "advanced" build sub-menu, where it belong for
now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current amd-catalyst options related to the CCCLE tool create the
following Config.in circular dependency:
package/qt/Config.in:134:error: recursive dependency detected!
package/qt/Config.in:134: symbol BR2_PACKAGE_QT_GUI_MODULE is selected by BR2_PACKAGE_AMD_CATALYST_CCCLE
package/amd-catalyst/Config.in:52: symbol BR2_PACKAGE_AMD_CATALYST_CCCLE depends on BR2_PACKAGE_QT_NOPNG
package/qt/Config.in:277: symbol BR2_PACKAGE_QT_NOPNG is part of choice <choice>
package/qt/Config.in:271: choice <choice> contains symbol <choice>
package/qt/Config.in:271: choice <choice> contains symbol BR2_PACKAGE_QT_GUI_MODULE
But in fact, it turns out that selecting BR2_PACKAGE_QT_GUI_MODULE is
not necessary, since we already "depends on BR2_PACKAGE_QT_X11", which
itself selects BR2_PACKAGE_QT_GUI_MODULE. Therefore, to fix this problem
we simply remove the "select BR2_PACKAGE_QT_GUI_MODULE" from the
BR2_PACKAGE_AMD_CATALYST_CCCLE option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, libgtk3 depends on either a full OpenGL stack, or on a
OpenGL-EGL stack provided by mesa3d.
This is because, when using the wayland backend, libgtk3 needs an
OpenGL-EGL stack tht provides the wayland extensions. So far, only
mesa3d would provide those extensions.
But now, those extensions are trickling down to other implementations,
like the Nvidia driver or other (even non-public) implementations.
Change the condition to be on the recently introduced libegl-wayland
option.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Wayland requires that an OpenGL/EGL implementation provides a few
extensions, so that wayland servers and clients can exchange buffers.
Currently, only one OpenGL/EGL implementation provides those extensions:
mesa3d.
However, other implementations are catching up, especially the
proprietary NVidia driver, which has as of late introduced those
extensions. Other, non-public implementations may also provide those
extensions.
A lot of wayland-related packages require those extensions, and
currently they have to depend on mesa3d to provide OpenGL/EGL, which
precludes using those packages when a non-mesa3d provider is enabled,
even when that providers implements the necessary extensions.
Add an option to the libegl virtual package, that providers on
OpenGL/EGL can select to state they provide those extensions.
Packages that need those extensions can additionally depend on this new
option, instead of the existing libegl package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AMD Catalyst Linux driver includes a graphical controler center for AMD
graphics accelerators, called Catalyst Controler Center. This commits
adds support to install this tool by adding a separated prompt.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
[Thomas:
- As noticed by Yann, fixed the dependency of the comment related to
the Qt PNG functionality.
- Also add the Qt PNG dependency to the BR2_PACKAGE_AMD_CATALYST_CCCLE
option itself, noticed by Yann.
- Add an empty line, also noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AMD Catalyst driver includes some command line tools for displaying
specific infos about the GL stack or to test 3D, like fglxinfo or
fgl_gears. This commit adds support to install such tools.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commits adds support for the AMD Catalyst Linux driver 15.9
(15.201.1151). It includes the fglrx kernel module with various fixes
to make it work with at least Linux kernel 4.4 LTS, the userspace OpenGL
stack and the xorg driver module.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- fixup whitespace issues noticed by Yann.
- register AMD_CATALYST_PREPARE_MODULE as a post-patch hook rather than
calling it during the configure step, also suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce a new package variable $(PKG)_DL_OPTS. When this variable
is defined, its value is passed to the downloader as options to
the underlying command. Packages can now retrieve archives from server
expecting logins and passwords, use referer url, proxy or specific
options for cloning a repository.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds support to pass options to the underlying command that is used
by downloader. Useful for retrieving data with server-side checking for
user login or passwords, use a proxy or use specific options for cloning
a repository via git and hg.
Signed-off-by: Romain Perier <romain.perier@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_BINFMT_FLAT_SEP_DATA can be used to create XIP userland and works fine
for m68k. Unfortunately a lot of basic packages as pcre are not compileable
because of a CPU or hardware limitation. The reason for failing are very
big functions used in the libraries or application code.
Typical errors are:
Fatal error: Tried to convert PC relative branch to absolute jump
or
error: value -yyyyy out of range
Add kernel patch from 4ec5542679 to make
BR2_BINFMT_FLAT_ONE compiled firmware work fine.
Fixes:
http://autobuild.buildroot.net/results/20b/20b1586757450d6aad8583ad7a787a7ca11acef1/http://autobuild.buildroot.net/results/d31/d311955ada1ffcd7f69e82965c8fe33eabe488cd/
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment in Config.in file about sep-data existing on m68k,
but being disabled due to build issues with numerous packages.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: cherry-picked from next to master, in order to be able to use
BR2_BINFMT_FLAT_ONE by default on m68k, since BR2_BINFMT_FLAT_SEP_DATA
causes too much problems.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64_efi reference defconfig is targeted towards an EFI
environment but the kernel which comes with it does not enable EFI
support by default.
Booting this defconfig without kernel EFI support on a qemu virtual
machine with EFI firmware resulted in no output to tty1 or ttyS0.
Enabling EFI support in the kernel fixed this and seems saner for an EFI
reference Buildroot defconfig.
Adding CONFIG_EFI to board/pc/linux-extras.config also affects
pc_x86_64_bios_defconfig which doesn't require it, however it was
observed that the extra overhead is small and so this is preferred
rather than having a separate config file.
This was tested with qemu 2.6.0 running with kvm enabled and firmware
EFI v2.60 by EDK II. Also built and verified bios defconfig on the same
setup but with BIOS firmware instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mips64, which is available since musl 1.1.15.
Only gcc 6.x has required support for it. Tested variations of
little/big endian and hard/soft float.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_TOOLCHAIN_BUILDROOT_GLIBC option is already not selectable on
BR2_sparc, so there is no need to have an additional "depends on
!BR2_sparc" on each of the glibc versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Older toolchains that use binutils <= 2.23.2 are affected by binutils
bug #14887 (https://sourceware.org/bugzilla/show_bug.cgi?id=14887),
where:
someinstruction [ foo, something ]
is not accepted, due to the whitespace after [ and before ], causing the
following build failures for OpenBLAS:
ARM register expected -- `pld [ r1,#512 ]'
Since we don't have any mechanism to add dependencies on binutils
versions, we work around this problem by patching the code to remove the
problematic whitespaces. As there are many many instances of this in the
ARM assembly code of OpenBLAS, we use a sed expression to make this
modification rather than a patch.
Fixes:
http://autobuild.buildroot.net/results/43e50b480b4aea0fdec745d7875c85377c114cac/
[Peter: use single quotes in sed invocation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise the build fail with this error:
configure.in:53: error: possibly undefined macro: AC_MSG_ERROR
If this token and others are legitimate, please use m4_pattern_allow.
See the Autoconf documentation.
configure.in:95: error: possibly undefined macro: AM_CONDITIONAL
Also, there is a PKG_CHECK_MODULES used for GTK.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The instructions listed sdcard.img as output image name but
board/pc/genimage-*.cfg generate it named as disk.img instead.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit
5ab751ca44 ("toolchain-buildroot: allow to
build ppc64(le) musl toolchains"), support for building a musl toolchain
for ppc64(le) was added. Since this support only works with gcc 6, some
additional dependencies have been added to the older gcc versions so
that they cannot be selected on ppc64(le)/musl.
Unfortunately, the expression of the dependency was wrong, and leads to
those older gcc versions being non-selectable if you're not using
musl. Indeed, the dependencies look like this:
depends on !BR2_powerpc64 && !BR2_powerpc64le && BR2_TOOLCHAIN_USES_MUSL
So as soon as you're not using musl, BR2_TOOLCHAIN_USES_MUSL is false,
so the entire condition is false, and the gcc version is not available.
Due to this, only gcc 6.x can be selected currently with uclibc or
glibc, which is clearly not the intended behavior.
This commit reworks those dependencies to:
depends on !(BR2_TOOLCHAIN_USES_MUSL && (BR2_powerpc64 || BR2_powerpc64el))
which more clearly expresses what we want:
"We don't want to (have a toolchain that uses musl and (be building
either for PPC64 or PPC64le))"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise the configure script will probe the distro directories for it
and it may not match what we use, for example fedora uses /etc/pki
instead of /etc/ssl.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version brings in several bug fixes: one of which partially
addresses Buildroot autobuilder failures for static configurations.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While the SourceForge page still exists, it seems to be a bit outdated,
and there is now a much newer Github repository with recent activity, so
mention it as well in the Config.in help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building jack2:
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t capture_latency = {-1, -1};
^
../tests/iodelay.cpp:170:49: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
jack_latency_range_t playback_latency = {-1, -1};
^
../tests/iodelay.cpp:171:50: error: narrowing conversion of '-1' from 'int' to 'jack_nframes_t {aka unsigned int}' inside { } [-Wnarrowing]
This is fixed by grabbing an upstream commit,
ff1ed2c4524095055140370c1008a2d9cccc5645
Fixes:
http://autobuild.buildroot.net/results/8a8/8a8d533a0f785591fee10f1c09c9294f892ef7f7/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils-arc-2016.09-eng008 build fails sometimes.
This happens due to the following issue:
binutils configure script has CC variable that stores compiler for
target and CC_FOR_BUILD variable that stores compiler for host.
WARN_FLAGS are verified by the script to be compatible only with CC
compiler but not with CC_FOR_BUILD compiler. Despite this WARN_FLAGS
are passed to both CC and CC_FOR_BUILD compilers. This leads to
unevident errors when cross-compiling. More information you can find
in the binutils mailing list:
https://sourceware.org/ml/binutils/2016-08/msg00117.html
We are going to write a patch for bunutils that fixes the initial
issue. Current patch contains temporary workaround. It should be
deleted after real fix.
Fixes:
http://autobuild.buildroot.net/results/00455b6a8324920ad843d90ce0413451522691a8//
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With gcc version 6, we get the following error when building logrotate:
logrotate.c: In function 'postrotateSingleLog':
logrotate.c:1784:5: error: this 'if' clause does not guard... [-Werror=misleading-indentation]
if (!state->doRotate)
^~
logrotate.c:1787:2: note: ...this statement, but the latter is misleadingly indented as if it is guarded by the 'if'
if (!hasErrors && log->flags & LOG_FLAG_TMPFILENAME) {
^~
This is fixed by grabbing an upstream commit,
6a36c105587b07ad14fc937f3ee6e2eb402621a2. Once this is fixed, we get:
config.c: In function 'strndup':
config.c:87:10: error: nonnull argument 's' compared to NULL [-Werror=nonnull-compare]
if(!s)
^
cc1: all warnings being treated as errors
make[2]: *** [config.o] Error 1
make[2]: *** Waiting for unfinished jobs....
cc1: all warnings being treated as errors
make[2]: *** [logrotate.o] Error 1
This is due to logrotate providing its own implementation of
strndup(). We could fix it, but it much better to simply use the one
provided by the C library, by fixing the detection method for strndup
availability. This is done in patch
0002-Use-autoconf-checks-for-strndup-and-asprintf.patch.
Fixes:
http://autobuild.buildroot.net/results/6dc2eb22104076920d77425b1e608ef9b9e01c94/
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: replace fix for the nonnull issue with a different one.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As tinycbor uses fopencookie() which is not available with the Blackfin
ADI external toolchain (UCLIBC_HAS_GLIBC_CUSTOM_STREAMS is not enabled),
add a dependency on !BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX.
This avoids the following build failure:
src/open_memstream.c: In function ‘open_memstream’:
src/open_memstream.c:105: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘vtable’
src/open_memstream.c:105: error: ‘vtable’ undeclared (first use in this function)
src/open_memstream.c:105: error: (Each undeclared identifier is reported only once
src/open_memstream.c:105: error: for each function it appears in.)
src/open_memstream.c:105: error: expected expression before ‘{’ token
src/open_memstream.c:111: warning: implicit declaration of function ‘fopencookie’
src/open_memstream.c:111: warning: return makes pointer from integer without a cast
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
[Thomas: improve commit message.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest musl release supports ppc64 architecture (both big endian and
little endian), so this commit adds support for this.
Since musl implements the ELFv2 ABI for both big-endian and
little-endian PowerPC64, we have to force using this ABI on PowerPC64
big endian (normally elfv1 is the default).
Also, only gcc 6.x has the necessary changes to support musl on PowerPC
64, so we restrict the gcc version selection accordingly.
Tested with Qemu for big endian and little endian configurations.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: add comment about the ABI flag in gcc.mk, rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ustr Makefile.in (as introduced by the Debian patch we apply), is
probably not parallel-safe:
402 install: install-opt install-dbg
403
404 install-opt: install-dirs install-opt-lib install-common
405
406 install-dbg: install-dirs install-dbg-lib install-common
407
408 install-opt-lib install-dbg-lib install-common: install-dirs
[--SNIP--]
424 install-opt-lib: $(OPT_LIB_STATIC) $(OPT_LIB_SHARED) ustr.pc
425 @echo Installing files
426 install -m 644 -t $(DESTDIR)$(libdir) $(OPT_LIB_STATIC)
427 install -m 755 -t $(DESTDIR)$(libdir) $(OPT_LIB_SHARED)
428 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHARED_NAME)
429 ln -s $(OPT_LIB_SHARED) $(DESTDIR)$(libdir)/$(OPT_LIB_SHARED_NAME)
430 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV)
431 ln -s $(OPT_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV)
432 -rm -f $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV_BSO)
433 ln -s $(OPT_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(OPT_LIB_SHAREDEV_BSO)
434 $(LDCONFIG) -n $(DESTDIR)$(libdir)
435 install -pm 644 -t $(DESTDIR)$(libdir)/pkgconfig ustr.pc
436
437 install-dbg-lib: $(DBG_LIB_STATIC) $(DBG_LIB_SHARED) ustr-debug.pc
438 @echo Installing files
439 install -m 644 -t $(DESTDIR)$(libdir) $(DBG_LIB_STATIC)
440 install -m 755 -t $(DESTDIR)$(libdir) $(DBG_LIB_SHARED)
441 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHARED_NAME)
442 ln -s $(DBG_LIB_SHARED) $(DESTDIR)$(libdir)/$(DBG_LIB_SHARED_NAME)
443 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV)
444 ln -s $(DBG_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV)
445 -rm -f $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV_BSO)
446 ln -s $(DBG_LIB_SHARED_NAME) $(DESTDIR)$(libdir)/$(DBG_LIB_SHAREDEV_BSO)
447 $(LDCONFIG) -n $(DESTDIR)$(libdir)
448 install -pm 644 -t $(DESTDIR)$(libdir)/pkgconfig ustr-debug.pc
As Thomas already noticed [0], the two interesting rules above are not
dependent one on the other, so can be run in parallel. So, while one is
doing its rm'n'ln dance, the other can be running an ldconfig, which has
the side effect of creating the missing symlinks. So, we can see this
sequence:
install-opt-lib: install-dbg-lib:
ldconfig
rm -f .../$(OPT_LIB_SHAREDEV) \
`-> symlink(..., .../$(OPT_LIB_SHAREDEV))
ln -s .../$(OPT_LIB_SHAREDEV)
In this case, ldconfig uses the opportunity-window between the rm and
the ln to create the link; so the ln does not work, as the target
already exist.
We fix that by not running ldconfig at all in Buildroot, we just pass
LDCONFIG=/bin/true .
Fixes (hopefully, since I was not even able to reproduce the failure):
http://autobuild.buildroot.org/?reason=ustr-1.0.4http://autobuild.buildroot.org/results/936/93626f55625ed7900c147bfd79ff7802366639b1/http://autobuild.buildroot.org/results/18b/18b6ec537da9e9055f58a8649c0719dc64df1bcf/
[...]
[0] http://lists.busybox.net/pipermail/buildroot/2016-May/161923.html
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now always have a sys/cdefs.h, so we no longer need to patch it out.
Simplify the patch by removing any hunk removing cdefs.h or the use of
__BEGIN_DECLS/__END_DECLS. However, it must be included when macros it
defines are being used.
Also, renumber patches to guarantee ordering (static patch was added
before big-endian one).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl provides neither sys/queue.h nor sys/cdefs.h. Those two headers are
however quite widely used in a lot of packages (though they should at
least not use cdefs.h which is only full of mostly-legacy macros, and
which is mostly an internal header of glibc and was never really meant to
be exposed to, and used by packages).
But we don't live in an ideal world, so a lot of packages break when
those two headers are missing.
We already took care of sys/queue.h with the netbsd-queue package. But
the need for cdefs.h is getting more and more pressing.
We rename the netbsd-queue package into musl-compat-headers, and we
make it install sys/queue.h (from NetBSD) and sys/cdefs.h (a minimalist
one we bundle in Buildroot). We can't use the cdefs.h from NetBSD
because it includes machine-dependent headers; instead we bundle a very
minimalistic one, that covers only what we need.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cpupower linux tool needs gettext, always (even without locales).
We need to disable NLS, otherwise it tries to compile the .po files.
We also need to pass -lintl, otherwise it forgets to link with it
(because, the world is glibc-only, you did not know? And glibc does not
need we link with -lintl, so why would we? Oh, yes, we also reinvented
our super intelligent one-off Makefile rather than use one of the
standard buildsystems).
Fixes#9181:
CC utils/helpers/sysfs.o
In file included from utils/helpers/amd.c:9:0: ./utils/helpers/helpers.h:13:21: fatal error: libintl.h: No such file or directory
#include <libintl.h>
^
Without NLS=false (yes, we could depend on host-gettext):
MSGFMT po/de.gmo
make[3]: msgfmt: Command not found
Without LDFLAGS=-lintl:
CC cpupower
./utils/cpupower.o: In function `main':
cpupower.c:(.text.startup+0x1a4): undefined reference to `libintl_textdomain'
./utils/idle_monitor/cpupower-monitor.o: In function `list_monitors':
cpupower-monitor.c:(.text+0x5dc): undefined reference to `libintl_gettext'
./utils/cpupower-set.o: In function `cmd_set':
cpupower-set.c:(.text+0x38): undefined reference to `libintl_textdomain'
./utils/cpupower-info.o: In function `cmd_info':
cpupower-info.c:(.text+0x20): undefined reference to `libintl_textdomain'
collect2: error: ld returned 1 exit status
Reported-by: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joergen Pihlflyckt <Jorgen.Pihlflyckt@ajeco.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Elfutils program names collide with binutils' binaries. By default
applications provided by elfutils are prefixed with "eu-", but in
Buildroot that setting is overridden by pkg-autotools.
The option in pkg-autotools rules was added to avoid including a target
triple in some packages as a prefix, so restore elfutils default
behaviour by adding a "eu-" program-prefix.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add comment in the .mk file explaining why we have a custom
program prefix, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since [1] <package>-reconfigure target is broken.
$ make elementary-reconfigure
Applying buildroot-libtool-v2.4.4.patch using patch:
Error: duplicate filename 'buildroot-libtool-v2.4.4.patch'
Conflicting files are:
already applied: buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
to be applied : buildroot/support/libtool/buildroot-libtool-v2.4.4.patch
When a package uses AUTORECONF, the libtool patch can be applied a
second time on the same ltmain.sh in the same directory as the
<package>-reconfigure target is called. This is not a problem since
autoreconf will overwrite the previously patched files. But with the
check introduced by [1], apply-patches.sh throw an error when the
package is reconfigured since the libtool patch is already present in
.applied_patches_list.
In addition to this, the .applied_patches_list file generated by
apply-patches.sh while patching ltmain.sh is not in the top-level
package source directory. Instead a duplicated .applied_patches_list
is generated beside the patched ltmain.sh which can be in a
subdirectory.
As noticed by Arnout Vandecappelle [2], the apply-patches.sh script
doesn't bring anything for the libtool patches.
"apply_patches.sh does the following:
* It handles directories -> not needed here.
* It handles compressed patches and tarballs -> not needed.
* It handles series files -> not needed.
* It handles errors in case of multiple patches -> not needed since
it's only one patch.
* It detects errors based on *.rej files -> not needed since it's only
a single patch so patch exit code is OK.
* It writes the patch list -> for libtool, this is quite silly because
it will be written in the directory where ltmain.sh is found, not in the
top-level directory, so you have these patch lists spread over the
source tree."
So use patch directly rather than apply-patches.
[1] 1924159814
[2] http://lists.busybox.net/pipermail/buildroot/2016-August/169810.html
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When available, libconfuse will use the libintl provided by the gettext
package.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: make it really an optional dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-6313: An attacker who obtains 580 bytes from the standard RNG
can trivially predict the next 20 bytes of output.
Add cryptographically secure sha256 hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-6316: Bug in the mixing functions of Libgcrypt's random number
generator. An attacker who obtains 4640 bits from the RNG can trivially
predict the next 160 bits of output.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In configure script there are some tests that are looking for
a suitable compiler. For this purpose script tries to compile
and link some C++ code that is hardcoded in the body of script.
The problem is that only linker flags ($LDFLAGS) are passed to the
compiler when the script is compiling test code. Therefore some
necessary command line options can be lost and this would lead to
errors.
This exactly happens to ARC:
1. -matomic option is lost as it compiler option,
2. test code compilation fails,
3. the script decides not to use arc-buildroot-linux-uclibc-g++,
4. scipt checks host compiler (x86_64-linux-gnu-g++ in your case),
5. package is being built for x86_64, not for ARC.
About last 2 steps - I don't know why configure script should try
to build stella for host machine. As for me an error should be
raised and a build should be stopped. But this is up to stella
developers.
Current patch adds compiler options ($CXXFLAGS) when compiling
test code in configure script.
Fixes stella build for ARC, e. g.:
http://autobuild.buildroot.net/results/c23/c23d655137b1c1825b1da69b18307c6a1d4b23b8//
[Peter: s/CPPFLAGS/CXXFLAGS/]
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Greg Ungerer fixed recently a bug in the Linux kernel, which
allows to use one memory region again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With musl C library, we get following build error
integck.c:37:28: fatal error: bits/stdio_lim.h: No such file or directory
#include <bits/stdio_lim.h>
^
compilation terminated.
make[2]: *** [integck] Error 1
Header <bits/stdio_lim.h> is not available in musl C library. However
<stdio.h> has all definition that <bits/stdio_lim.h> supposed to be
providing. Moreover <bits/stdio_lim.h> shouldn't be included directly
instead we should be using <stdio.h>.
Since we already include <stdio.h> and in case of uClibc or glibc
<bits/stdio_lim.h> gets included internally, we can safely remove it.
Fixes:
http://autobuild.buildroot.net/results/175/1754861457af520480cc34d7d2d0edff2868ff66/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
QtWebkit needs gstreamer-0.10 and the 'app' plugins, so we depend on
gstreamer and select the required plugins.
We can't select gstreamer as that would cause circular dependencies in
kconfig:
package/kodi/Config.in:37:error: recursive dependency detected!
package/kodi/Config.in:37: symbol BR2_PACKAGE_KODI depends on BR2_PACKAGE_KODI_EGL_GLES
package/kodi/Config.in:16: symbol BR2_PACKAGE_KODI_EGL_GLES depends on BR2_PACKAGE_HAS_LIBEGL
package/opengl/libegl/Config.in:1: symbol BR2_PACKAGE_HAS_LIBEGL is selected by BR2_PACKAGE_MESA3D_OPENGL_EGL
package/mesa3d/Config.in:150: symbol BR2_PACKAGE_MESA3D_OPENGL_EGL is selected by BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL
package/mesa3d/Config.in:92: symbol BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL depends on BR2_PACKAGE_MESA3D
package/mesa3d/Config.in:1: symbol BR2_PACKAGE_MESA3D is selected by BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV
package/x11r7/xdriver_xf86-video-imx-viv/Config.in:1: symbol BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV depends on BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11
package/freescale-imx/imx-gpu-viv/Config.in:34: symbol BR2_PACKAGE_IMX_GPU_VIV_OUTPUT_X11 is part of choice <choice>
package/freescale-imx/imx-gpu-viv/Config.in:27: choice <choice> contains symbol <choice>
package/freescale-imx/imx-gpu-viv/Config.in:27: choice <choice> contains symbol BR2_PACKAGE_FREESCALE_IMX
package/freescale-imx/Config.in:1: symbol BR2_PACKAGE_FREESCALE_IMX is selected by BR2_PACKAGE_GST_FSL_PLUGINS
package/gstreamer/gst-fsl-plugins/Config.in:8: symbol BR2_PACKAGE_GST_FSL_PLUGINS depends on BR2_PACKAGE_GSTREAMER
package/gstreamer/gstreamer/Config.in:5: symbol BR2_PACKAGE_GSTREAMER is selected by BR2_PACKAGE_QT_WEBKIT
package/qt/Config.in:464: symbol BR2_PACKAGE_QT_WEBKIT depends on BR2_PACKAGE_QT
package/qt/Config.in:5: symbol BR2_PACKAGE_QT is selected by BR2_PACKAGE_PYTHON_PYQT
package/python-pyqt/Config.in:5: symbol BR2_PACKAGE_PYTHON_PYQT depends on BR2_PACKAGE_PYTHON
package/python/Config.in:5: symbol BR2_PACKAGE_PYTHON is selected by BR2_PACKAGE_KODI
This one is fairly complicated to fix properly, so it is easier to just
depend on gstreamer.
Also rework the comment when QtWebkit is not available.
Fixes:
http://autobuild.buildroot.org/results/84d/84d338b70c8ce3f21dd202de387326f18526aa63/http://autobuild.buildroot.org/results/379/379ad4eadf5af7e1d5b977bc229d3fcaba25b4fe/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current logic to pass the --{enable,disable}-mipsfpu option is:
ifeq ($(BR2_MIPS_SOFT_FLOAT),y)
FFMPEG_CONF_OPTS += --disable-mipsfpu
else
FFMPEG_CONF_OPTS += --enable-mipsfpu
endif
In practice, this means that on MIPS soft-float, --disable-mipsfpu is
passed, and that in *all* other cases, --enable-mipsfpu is passed,
including if we are *not* targetting the MIPS architecture.
Even though this doesn't seem to cause any problem, it is a bit weird to
see --enable-mipsfpu when you're building ffmpeg for a non-MIPS
architecture, so we better fix this by enclosing the MIPS-related
options in a MIPS condition.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_ARM_CPU_HAS_NEON=y, we pass --enable-neon. However, when
BR2_ARM_CPU_HAS_NEON is disabled, we don't pass anything. This generally
works fine, but turned out to integrate NEON code in ARMv7-M
builds (since it's ARMv7, ffmpeg assumed it should enable NEON code).
Even though ffmpeg is now disabled for ARMv7-M, it still makes sense to
be explicit, and disable NEON support when the CPU doesn't have it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump runc to cc29e3dded8e27ba8f65738f40d251c885030a28
This version is required by Docker Engine v1.12.0.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump docker-engine to the latest stable v1.12.0 from v1.12.0-rc3.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add security related bugfix to fix CVE-2016-4429 from
GNU libc project.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-eng008.
Main updates were made for gcc. It was switched to GCC 6 and to
OSABI v4.
Besides this patch fixes buildroot ARC failures connected to
"crtbeginT.o" object file missing. This issue lead to two main errors:
1) "crtbeginT.o: No such file or directory", e. g. bootutils-1.0.0.
No comments are required here I hope.
2) Errors like "compiler cannot create executables", e.g.:
a) host-gcc-final-arc-2016.09-eng007 static build,
b) aespipe-2.4c.
That was caused because the test to determine if compiler is able to
create executables was failing due to missing "crtbeginT.o" file.
We still keep GDB as it is of arc-2016.03 release because there're some
issues we'd like to resolve before releasing it to wider audience.
So again note this is next engineering builds of arc-2016.09 series
and it might have all kinds of breakages, please don't use it for
production builds.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT selects BR2_PACKAGE_DTC, but forgets
to depends on !BR2_STATIC_LIBS like BR2_PACKAGE_DTC does.
Fixes the following kconfig warning:
arning: (BR2_PACKAGE_UBOOT_TOOLS_FIT_SUPPORT && BR2_PACKAGE_KVMTOOL && BR2_PACKAGE_UBOOT_TOOLS_MKIMAGE_FIT_SIGNATURE_SUPPORT) selects BR2_PACKAGE_DTC which has unmet direct dependencies (!BR2_STATIC_LIBS)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 0d8158fc61. Thanks to
a fix in libaio, blktrace now builds fine on PowerPC, so there's no
reason to disable it anymore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both the blktrace and gadgetfs-test packages were failing to build on
PowerPC due to the mysterious:
hidden symbol `_rest32gpr_30_x' in libgcc.a(e500crtresx32gpr.o) is referenced by DSO
Due to this error, we disabled blktrace on PowerPC in commit
0d8158fc61. However, gadgetfs-test
continued to fail with the same error. As Romain Naour pointed out, the
problem seems in fact to come from a common dependency of blktrace and
gadgetfs-test: libaio. As Romain investigated, the problem started
appearing after the last bump of libaio, from version 0.3.109 to
0.3.110.
A quick bisect through the libaio changes between 0.3.109 and 0.3.110
has revealed that the problematic change is one in the libaio build
system, which now obeys to the CFLAGS provided in the environment,
rather than overriding them. So the CFLAGS provided by Buildroot cause
this problem. It turns out that the problematic CFLAGS is -Os, which is
indeed known to cause issues on PowerPC in some corner cases.
Even though it would probably be a better long-term solution to switch
to -O2 by default, and mark -Os as not available on PowerPC, it is a too
radical change so close to 2016.08. So we simply adjust the libaio
package so that it uses -O2 instead of -Os.
Fixes:
http://autobuild.buildroot.net/results/5e6cc4c432ce6c964ac285026978ad14d9eae97c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the ffmpeg code, libavutil/arm/asm.S makes some assumption about the
ARM architecture for which the code is built. Only ARMv4, ARMv5, ARMv6
and ARMv7-A is supported. Due to this, object files built out of
ARM-optimized assembly code have the wrong architecture information,
causing a failure at link time.
Adding ARMv7-M support would be possible, but it doesn't exist yet in
ffmpeg, and it's pretty unlikely that ffmpeg will ever be needed on an
ARMv7-M platform, so this commit takes the simple approach of disabling
ffmpeg for ARMv7-M.
Fixes:
http://autobuild.buildroot.net/results/ca4c67b093afd6f14349fcdc87b02e0480172e8c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After fixing build issue related to MS_DIRSYNC and MS_RELATIME, we get
following build error with blackfin external toolchain.
fstest_monitor.c: In function 'main':
fstest_monitor.c:237: warning: implicit declaration of function 'fork'
/tmp/ccCzZIuW.o: In function 'main':
/home/rahul.bedarkar/buildroot/output/build/mtd-1.5.2/tests/fs-tests/utils/fstest_monitor.c:237: undefined reference to '_fork'
collect2: ld returned 1 exit status
make[2]: *** [fstest_monitor] Error 1
Since it uses fork(), add dependency on MMU support for integck.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libical requires time zone information in order to make use of time
zone functions (otherwise, segfaults occur when applications call
the time zone functions). This patch:
1. forces the system to build time zone info
2. ensures libical does not build its own time zone info (this is
the default behaviour, but the flag is added in case libical's
default changes in the future).
Signed-off-by: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Manuel in bug #9161, the commit
19b503b0d2 that bumped the X.org server
from 1.18.3 to 1.18.4 forgot to also rename the patch directory, making
the existing patch orphan, while it is still needed. This commit
therefore renames the 1.18.3 directory to 1.18.4.
Moreover, this patch is also needed for the 1.17.x X.org server series
which has been added recently, so this commit also adds the patch to a
new 1.17.4 directory.
Fixes bug #9161.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed with Waldemar, the C++ support for Blackfin is currently
broken, and we don't have a fix in sight for the 2016.08
release. Therefore, this commit disables C++ support entirely on the
Blackfin architecture in the internal toolchain backend.
This will avoid a significant number of Blackfin build failures, that
occur when building C++ packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When readline is static library, we need to link against ncurses,
it is because, dependent library's symbols are not resolved when
static library is built. Those symbols are resolved when binary tries
to link with static library.
We can't pass linker flags for ncurses by setting LIBS environment
variable via <PKG>_CONF_ENV because it looks like build system is not
taking that into account and even though it would have been, order of
linking is important.
We can't also pass linker flags for ncurses via --with-readline-libs
conf options because it causes lftp_LIB_READLINE macro to take readline
headers from host machine if available. To use --with-readline-libs
we need to set --with-readline=yes and --with-readline-inc to include
dir. But when --with-readline=yes, readline_prefix is computed based
on if headers can be found in /usr/local or /usr. If readline is
installed on host machine, then configure fails since we are using
headers for host machine. If headers are not found in /usr/local or /usr
then only path specified --with-readline-inc is taken into account.
So specifying linker flags for ncurses via --with-readline-libs will
not work in all cases.
So it looks like, updating linker flags directly is only option to fix
static link issue against readline.
Fixes:
http://autobuild.buildroot.net/results/ae9/ae93bd1b4f6e1ed8f386830d4a51f00d9466f267/
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
[Thomas: update autoreconf comment in .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When installation prefix is specified in "--with-readline" config
option, lftp's build systems figures out include dir and linker flags.
So don't specify --with-readline-{inc,libs} options which are anyways
get ignored by build system.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we limit installing zoneinfo to non-musl toolchain, by lack
of knowledge on how it would work on musl.
Turns out that musl uses the same zoneinfo format as glibc does.
Make it possible to install the TZ info whatever the C library; for
musl, use tzdata as for glibc.
Thanks Rich! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Rich Felker <dalias@aerifal.cx>
Cc: Marc Khouri <marc@khouri.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes several build issues of OpenBLAS on ARM:
- The first one occured on ARMv5 platforms, when the ARMV5 OpenBLAS
architecture is used. In this case, OpenBLAS build system forces
-march=armv5, which may not be correct for certain toolchains. As an
example, the Sourcery CodeBench toolchain has an ARMv4 and an ARMv5
sysroot. The ARMv5 sysroot is actually an armv5te sysroot, so when
OpenBLAS forces -march=armv5, gcc thinks it should use the ARMv4
sysroot, causing build failures.
To address this, a patch to completely remove the -march ARM CFLAGS
is added to OpenBLAS.
Fixes:
http://autobuild.buildroot.net/results/991497b12b70f948169e5ad99eebd0fe7f6209a2/
- The second one occured on ARMv7 platforms, when the ARMV7 OpenBLAS
architecture is used. The OpenBLAS code expects an EABIhf build, so a
dependency is added for EABIhf for both ARMv6 and ARMv7.
Fixes:
http://autobuild.buildroot.net/results/0ba0bee48a83367fcefab827e8eaa72f0c8fe90b/
- Once the previous ARMv7 problem has been fixed, it turns out that the
ARMv7 specific code in OpenBLAS contains VFPv3 specific
code. Therefore, the user *must* have choosen either VFPv3 or VFPv4,
or the code will not build. VFPv3-D16/VFPv4-D16 are not sufficient,
as more than 16 registers are used by the OpenBLAS code.
To address this, the ARMV7 platform of OpenBLAS is restricted to the
proper VFPv3/VFPv4 selection, and the ARMV6 platform is restricted to
the proper VFPv2 selection.
This problem was not visible in the autobuilders, as it was hidden by
the previous one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While musl and glibc provide the ucontext structure definition on all
architectures they support, it is not the case of uClibc. We have been
excluding more and more architectures over time, but this isn't really
nice as we continuously need to add more. Latest example: the fact that
ucontext on ARM is only available on ARM platforms that support the ARM
instruction set (i.e not on the Thumb-2 only Cortex-M platforms).
Therefore, we introduce a BR2_PACKAGE_LIBSIGSEGV_ARCH_SUPPORTS variable,
which:
- is set to 'y' for musl and glibc
- is set to 'y' for uClibc for the only architectures that are known to
provide ucontext (those are the ones that select ARCH_HAS_UCONTEXT in
uClibc.
Note that we remove the comment, as it would become a way too
complicated comment, and we usually don't add comment for such
complicated situations (see libunwind for a similar example).
Fixes:
http://autobuild.buildroot.net/results/b1e40b3ec64cd98b535d83e89e5780c46680e095/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dante configure script has some logic to remove the -g flag from
CFLAGS, but this logic is flawed and also removed -g in
-mfloat-gprs=double, turning it into the invalid -mfloatprs=double,
causing a build failure.
This commit adds a patch that gets rid of this -g removal logic, since
it is in fact unnecessary.
Fixes:
http://autobuild.buildroot.net/results/313370bf05efe7fd87c281a97ecb6e06531a87ed/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The procps-ng package currently fails to build on BR2_STATIC_LIBS=y
configurations. Indeed, by default NUMA support is enabled, and it
requires dlopen(). As hinted by the configure script, passing
--disable-numa allows to disable NUMA support.
However, once this is done, another issue pops up: dlopen() is also used
by the SELinux support. But even when SELinux support is disabled, the
procps-ng code incorrectly includes <dlfcn.h>. This is addressed by the
addition of a patch.
Fixes:
http://autobuild.buildroot.net/results/b385bf435085728aece6323a5006ba9fa6631744/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The webrtc-audio-processing configure script assumes that if the
host_cpu part of the tuple is "arm", then ARM instructions are
available. This is obviously incorrect for ARM Cortex-M platforms, which
only support the Thumb-2 instruction set.
In order to address this, we add a patch,
0001-configure.ac-fix-architecture-detection.patch, which changes how
webrtc-audio-processing detects the architecture: instead of relying on
the host_cpu part of the tuple, it relies on the built-in definitions of
the compiler.
Not only it fixes the Cortex-M detection, but it also enables ARMv7
optimizations on ARMv7-A: until now they were only enabled when the
host_cpu part of the tuple was armv7, which is never the case in
Buildroot.
However, once this issue is fixed for Cortex-M, the build nonetheless
fails later due to the usage of NPTL-only functions. So we change the
thread dependency to a NPTL dependency.
Fixes:
http://autobuild.buildroot.net/results/4933082cd7cc5781404c77ccef5c2b9333c5f714/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size-stats script fails when the usb_modeswitch_data is enabled,
because this package installs files that contain commas in their
name. However, the size-stats script also uses comma as a separator for
its CSV files, causing a "ValueError: too many values to unpack" in:
pkg, fpath = l.split(",")
Fix this by splitting only the two fields that need to be split.
The bug was reported by Matthias <porto.rio@gmx.net>, who also suggested
a fix.
Fixes bug #9136.
Reported-by: Matthias <porto.rio@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ALSA > 1.1.x are not determined correctly when configuring the library.
A patch, identical to the one used for Qt5, is added to the qt package
to solve this problem.
Signed-off-by: Alexander Shiyan <shc_work@mail.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When uClibc-ng 1.0.17 was released, there was a regression when building
Thumb2-only for a CPU that is capable of running in arm mode (e.g. an
armv7a cpu).
We hastily added a patch to revert the upstream commit, as a stop-gap
measure, waiting for the actual fix.
That actual fix is there, now. :-)
Drop our revert-patch, and add the upstream patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
iproute2 believes that it needs to link with libpthread for its arpd
binary, because "some db implementations require thread". Therefore, our
iproute2.mk explicitly disables the build of arpd when thread support is
not available.
However, the sed expression it uses no longer works. The Makefile used
to look like:
TARGETS = foo baz baz arpd foobar
so replacing " arpd " with a space was working fine. However, the
Makefile got changed in iproute2 to:
ifeq (... berkeleydb available ...)
TARGETS += arpd
endif
i.e, with no space at the end of the line. This made our sed expression
ineffective, causing build issues with no-thread configurations since
arpd was no longer disabled.
To address this, instead of sed-ing the Makefile, we overwrite the
berkeleydb detection of iproute2, by writing to the "Config" file, like
we're doing for other aspects of the package.
Fixes:
http://autobuild.buildroot.net/results/03a37a2372a4c2e438a073e015c49d9e554b86b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Traditionally, Buildroot has a default of enabling thread
support. However, with the current construct of the thread choice in the
uclibc package, the m68k and microblaze architecture end up with no
thread support as the default.
In order to avoid having to explicit a more complicated "default" value
for the choice, we take a simple approach: we order the 3 possible
choices by order of "preference", since Kconfig selects the first
selectable option in a choice by default.
So, NPTL is first and is the default when available. Then comes
linuxthreads which only gets selected as the default when NPTL is
available. None is offered as a last choice (in the current
implementation, it is never the default, since all architectures can
have thread support, either through NPTL or linuxthreads).
[Thomas: reworked according to Yann's comment that we could rely on the
Kconfig behavior that selects the first available choice option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_PACKAGE_BLKTRACE option "depends on
BR2_PACKAGE_LIBAIO_ARCH_SUPPORTS", but this architecture dependency was
not replicated in the Config.in comment. This commit fixes this
inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running ntp it randomly aborts at ntp-4.2.8p8/libntp/recvbuff.c:326
which seems to be a debugging feature. This patch just disables
debugging, it does not fix the root cause of the problem.
Signed-off-by: Vicente Bergas <vicencb@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since enlightenment 0.20 uuid.h is always included in e_pixmap.c but
libuuid is checked at configure time only when wayland support is
enabled.
Include uuid.h must guarded by HAVE_WAYLAND.
Fixes:
CC src/bin/src_bin_enlightenment-e_pixmap.o
src/bin/e_pixmap.c:16:18: fatal error: uuid.h: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
if test "${mesontimer}"="0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}"="1"; then fdt rm /timer; fi
@@ -46,5 +173,4 @@ if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /
if test "${nographics}"="1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}"="1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
# Booting
booti ${loadaddr} - ${dtb_loadaddr}
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
