Add four new tests for systemd (rw and ro in each case):
- use dbus-broker instead of the original dbus
- use the original dbus, with dbus-broker installed
The first two extend the existing TestInitSystemSystemdRoIfupdown test,
by just enabling dbus-broker; the second ones extend this further, by
explicitly enabling the original dbus.
Presence of the original dbus and dbus-broker on the same system is
valid: the original dbus is used as the system bus daemon, while
dbus-broker is used for (some of) the session bus(es). We do not test
the session bus for now, but the new test ensures the system bus daemon
is not impacted by the presence of dbus-broker.
Note: the 'full' test-case enables all systemd options, and some of them
do pull the original dbus package, so we can't use that to test the
integration of dbus-broker; instead, we extend the ifupdown case, which
does not enable the original dbus.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
dbus-broker fits the bill as a message bus daemon, so only enable the
original dbus if dbus-broker is not enabled.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Norbert Lange <nolange79@gmail.com>
dbus-broker is an alternate implementation of a dbus dameon. It can be
used as a drop-in replacement for the system bus daemon, as well as the
session bus daemon.
dbus-broker is (basically, and as far as we're concerned in Buildroot)
split in two components:
- the actual message bus daemon, that relays messages across clients
- a launcher, which is responsible for setting various aspects of the
bus, like setting the policy et al. and opening the socket(s) the
message bus daemon will have to listen on...
The launcher can only be used in a systemd setup (it makes heavy use of
systemd facilities), while the message bus is generic. However, the
message bus daemon is useless without a launcher. There does not exist a
non-systemd launcher, which makes dbus-broker actually a systemd-only
package; this can be revisited when/if a non-systemd launcher appears.
There are two cases:
1. original dbus disabled
Here, we install the config files and systemd socket activation
units; dbus-broker provides the system and sessions bus daemons.
2. original dbus enabled
In this case, we do not install the config files and systemd socket
activation units: they all are provided by the original dbus.
In this situation, the default system and sessions message bus are
the original dbus; dbus-broker is not enabled.
However, users may opt-in to use dbus-broker in a few ways:
- at build-time: provide drop-in units in an overlay;
- at build-time: call systemctl enable/disable from a post-build
script;
- at runtime (on a RW filesystem): by calling systemctl
enable/disable
Note that, contrary to the original dbus, we do not define a user to run
the system bus as non-root; this is handled by systemd.
As for the licensing terms: they are pretty trivial for dbus-broker
itself, but it makes use of third-party code that it inherits as git
submodules (that are bundeld in the release archive). Thus the licensing
is a bit convoluted... The third-party codes claim to be licensed as
"Apache-2.0 and LGP-2.1+" in their AUTHORS files, but at the same time
claim "**Apache-2.0** OR **LGPL-2.1-or-later**" in their README files.
The individual source files (that are used) do not seem to have any
licensing header to clarify the situation.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- don't select systemd; depend on it instead
- only install config files and systemd units wihtout original dbus
- fix licensing info
- entirely reword and extend the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
---
Changes v3 -> v4 (Yann, respiining after review by Norbert):
- drop the non-systemd case
- drop the launcher option
- reinstate BR2_COREUTILS_HOST_DEPENDENCY and ln --relative
Changes v2 -> v3 (Norbert, respinning after Yann):
- add an own config entry for dbus-broker-launch
enabled by default if systemd init is used
- undo BR2_COREUTILS_HOST_DEPENDENCY
- undo adding dbus user - never used by this package
- add condtional audit dependency
- cleanup conditional logic a bit
Changes v1 -> v2 (Yann):
- make launcher conditional
- don't select systemd; don't depend on it either
- don't install systemd units without systemd
- only install config files and systemd units wihtout original dbus
- rename hooks with meaningful names
- fix licensing info
- entirely reword and extend the commit log
The error is misleading: it reports that no name was provided,
when in fact the external.desc file is missing.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>p
Reviewed-by: Romain Naour <romain.naour@gmail.com>
When a br2-external tree has an issue, e.g. a missing file, or does not
have a name, or the name uses invalid chars, we report that condition by
setting the variable BR2_EXTERNAL_ERROR.
That variable is defined in the script support/scripts/br2-external,
which outputs it on stdout, and checked by the Makefile.
Before d027cd75d0, stdout was explicitly redirected to the generated
.mk file, with exec >"${ofile}" as the Makefile and Kconfig
fragments were generated each with their own call to the script, and
the validation phase would emit the BR2_EXTERNAL_ERROR variable in the
Makefile fragment.
But with d027cd75d0, both the Makefile and Kconfig fragments were now
generated with a single call to the script, and as such the semantics of
the scripts changed, and only each of the actual generators, do_mk and
do_kconfig, had their out put redirected. Which left do_validate with
the default stdout. Which would emit BR2_EXTERNAL_ERROR on stdout.
In turn, the stdout of the script would be interpreted by as part of the
Makefile. But this does not end up very well when a br2-external tree
indeed has an error:
- missing a external.desc file:
Makefile:184: *** multiple target patterns. Stop.
- empty external.desc file:
Config.in:22: can't open file "output/.br2-external.in.paths"
So we must redirect the output of the validation step to the
Makefile fragment, so that the error message is correctly caught by the
top-level Makefile.
Note that we don't need to append in do_mk, and we can do an overwrite
redirection: if we go so far as to call do_mk, it means there was no
error, and thus the fragment is empty.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
- Fix CVE-2020-12049: An issue was discovered in dbus >= 1.3.0 before
1.12.18. The DBusServer in libdbus, as used in dbus-daemon, leaks file
descriptors when a message exceeds the per-message file descriptor
limit. A local attacker with access to the D-Bus system bus or another
system service's private AF_UNIX socket could use this to make the
system service reach its file descriptor limit, denying service to
subsequent D-Bus clients.
- Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A gcc compiler, which was configured with
--with-gcc-major-version-only, will only return a single
number. (debian does this for example).
A simple modification allows the check to work with both
single numbers (eg. '9') and full versions (eg. '9.2.1').
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
First patch is not needed since version 1.67.0 and
90dd8146fb
Indeed, since this bump, the patch is wrongly patching
virtual string_type format(double value,size_t &code_points) const
instead of:
virtual string_type format(int64_t value,size_t &code_points) const
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ChangeLog:
- SCardEndTransaction(): greatly improve performances (x300)
- tokenparser: accept any Unicode character in a reader name
- Use /run instead of /var/run by default
- Fix a memory leak from a polkit call
- Some other minor improvements
Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
EarlyOOM daemon for triggering Linux OOM killer before running out of
memory, avoiding situations where the machine becomes unresponsive from
out of control swapping.
Some desktop distributions are installing and enabling this daemon by
default to prevent unresponsive machines in OOM scenarios.
https://fedoraproject.org/wiki/Changes/EnableEarlyoom
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since cf75d7da98 we have a build failures when
building libgbm.so when valgrind package is selected because --static is always
passed to pkg-config even for shared build.
Even if -Dvalgrind=false on meson command line to build mesa, the valgrind
libraries come from pkg-config libdrm...
output/host/bin/pkg-config libdrm --libs --static
-L[...]/sysroot/usr/lib -ldrm -lm -L[...]/sysroot/usr/lib/valgrind
-lcoregrind-arm64-linux -lvex-arm64-linux -lgcc
... and break the build.
See initial discussions:
http://lists.busybox.net/pipermail/buildroot/2020-June/284543.html
This is due to a wrong condition test added by the patch
0004-mesonbuild-dependencies-base.py-add-pkg_config_stati.patch.
Indeed, pkg_config_static is a string, not a boolean; it is set to
either 'true' or 'aflse' by our meson package infra. Since the returned
object is a string, do not pass a boolean, but pas None (we only want to
test against the 'true' string, so we don't care what we get back when
it is not set, which never happens in Buildroot).
Before this patch, the issue can be reproduced using the following defconfig:
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_VALGRIND=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
Fixes:
http://autobuild.buildroot.net/results/1b5/1b58d73ecbbe1af2c3e140563d696cf32d1c4a5a/build-end.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: slightly reword the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes (on startup):
$ usr/libexec/iwd
Wireless daemon version 1.7
Failed to initialize D-Bus
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- move MMU dependency first
- split long line in comment dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libwebsockets allows the usage of unix-domain-sockets since 2016, so
explicitly enable it (size increase is a ridiculous 12 bytes on ARM).
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
[yann.morin.1998@free.fr: always enable, don't add a menuconfig entry]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Meson build system enable by default -Wl,--as-needed [1][2] in the linker command line
and due to this the libmesa_dri_drivers.so build fail with the Codesourcery ARM and
Aarch64 2014.05 toolchain:
/home/buildroot/autobuild/run/instance-1/output-1/host/bin/arm-none-linux-gnueabi-g++
-o src/mesa/drivers/dri/libmesa_dri_drivers.so
-Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -shared -fPIC -Wl,--start-group
-Wl,-soname,libmesa_dri_drivers.so -Wl,--whole-archive
src/mesa/drivers/dri/radeon/libr100.a src/mesa/drivers/dri/nouveau/libnouveau_vieux.a
-Wl,--no-whole-archive
src/mesa/drivers/dri/common/libmegadriver_stub.a
src/mesa/drivers/dri/common/libdricommon.a
src/mapi/shared-glapi/libglapi.so.0.0.0
src/mesa/libmesa_classic.a src/mesa/libmesa_common.a
src/compiler/glsl/libglsl.a src/compiler/glsl/glcpp/libglcpp.a
src/util/libmesa_util.a src/util/format/libmesa_format.a
src/compiler/nir/libnir.a src/compiler/libcompiler.a
src/util/libxmlconfig.a
[...]
src/mesa/drivers/dri/common/libmegadriver_stub.a(megadriver_stub.c.o): In function `megadriver_stub_init':
megadriver_stub.c:(.text.startup+0x20): undefined reference to `dladdr'
megadriver_stub.c:(.text.startup+0xbc): undefined reference to `dlsym'
collect2: error: ld returned 1 exit status
This problem seems to be specific to this toolchain release (ARM and aarch64)
CodeSourcery 2014.05: gcc 4.8.3-prerelease; binutils 2.24.51.20140217; glibc 2.18
The following prebuilt toolchain has been tested and doesn't trigger this issue:
Linaro 4.9-4.9-2014.11: gcc 4.9.3; binutils 2.24.0; glibc 2.19
CodeSourcery 2014.11: gcc 4.9.1; binutils 2.24.51.20140217; glibc 2.20
Older toolchains doesn't have a recent enough glibc or linux-headers version
to breaking the build with mesa3d 20.1.0 or libdrm 2.4.102.
In order to build mesa3d with the CodeSourcery 2014.05 using --as-needed would be
reorder the static librairies:
diff --git a/src/mesa/drivers/dri/meson.build b/src/mesa/drivers/dri/meson.build
index b09ca16e38a..9ac6731c522 100644
--- a/src/mesa/drivers/dri/meson.build
+++ b/src/mesa/drivers/dri/meson.build
@@ -59,7 +59,7 @@ if _dri_drivers != []
[],
link_whole : _dri_drivers,
link_with : [
- libmegadriver_stub, libdricommon, libglapi,
+ libdricommon, libmegadriver_stub, libglapi,
libmesa_classic,
],
Instead, we can disable --as-needed from the meson build system using
"-Db_asneeded=false" only for this toolchain.
[1] https://mesonbuild.com/Builtin-options.html
[2] https://wiki.gentoo.org/wiki/Project:Quality_Assurance/As-needed
Fixes:
http://autobuild.buildroot.net/results/eec39a4fbfbfaa58980fab36f2fd902a16eecf0f/build-end.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libhtpserver uses the following constructor since version 0.18.0 and
9cdc90177e:
http_request(http_request&& b) noexcept = default;
This raises the following build failure on gcc 4.8:
In file included from http_request.cpp:22:0:
httpserver/http_request.hpp:234:9: error: function 'httpserver::http_request::http_request(httpserver::http_request&&)' defaulted on its first declaration with an exception-specification that differs from the implicit declaration 'httpserver::http_request::http_request(httpserver::http_request&&)'
http_request(http_request&& b) noexcept = default;
^
This build failure is due to the following gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59526
Instead of adding BR2_TOOLCHAIN_HAS_GCC_BUG_59526, simply add a
dependency on gcc >= 5
Fixes:
- http://autobuild.buildroot.org/results/18a29056e0191d9f23e1f9c6f72b13c07d03b300/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Change the upstream URL as the project is now under Eclipse umbrella.
Remove obsolete options like IPK nad RPM and disable JSONPLAT option
that is enabled by default but requires c-json package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps python-pydal to version v20200531.1.
It updates alse the LICENSE hash cause the file was cleaned and revised by the
author, the license remains the same.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install header files and libraries into the staging area. Some
packages like mraa (if enabled for Node.js) search for node.h
and v8.h. Hence, Node.js development file must be installed to
the staging area.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop fourth and sixth patches (already in version)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package bumps python-pillow to version 7.1.2.
It updates also the LICENSE hash cause of a copyright year update.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
User can drop in more systemd units or presets
in an rootfs overlay, which will be copied over *after*
the TARGET_FINALIZE_HOOKS are run.
Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Jérémy ROSEN <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2020-13401: Disable IPv6 Router Advertisements to prevent address
spoofing
An attacker in a container, with the CAP_NET_RAW capability, can craft
IPv6 router advertisements, and consequently spoof external IPv6 hosts,
obtain sensitive information, or cause a denial of service.
In addition, 19.03.9..11 fixes a number of issues. For details, see:
https://docs.docker.com/engine/release-notes/
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact, extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.13.9 (released 2020/03/19) includes fixes to the go command, tools, the
runtime, the toolchain, and the crypto/cypher package.
go1.13.10 (released 2020/04/08) includes fixes to the go command, the runtime,
and the os/exec and time packages.
go1.13.11 (released 2020/05/14) includes fixes to the compiler.
go1.13.12 (released 2020/06/01) includes fixes to the runtime, and the go/types
and math/big packages.
Release notes: https://golang.org/doc/go1.13
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a4eef9a395 (linux: introduce BR2_KERNEL_DTB_KEEP_DIRNAME)
introduced a new config option, but its name was not matching the
naming-scheme of the other config options.
Rename it.
We don't need legacy handling, because that config option was added very
recently and was never part of a release.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumped xr819-xradio package to the latest version to fix some compilation issues when using kernel 5.6 for the orangepi-zero
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit fcd9c85475, gr-qtgui has
been removed because this Qt GUI was based on Qt4 which was no longer
supported by Buildroot.
However, gnuradio 3.8 brings a Qt5-based GUI, and therefore the option
BR2_PACKAGE_GNURADIO_QTGUI can be re-introduced.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The D-Bus installation process installs dbus-daemon-launch-helper as
follows:
chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
And when the installation does not take place as root (like is the
case in the context of Buildroot), it prints:
echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \
So let's adjust the installation logic of dbus-daemon-launch-helper to
match these requirements.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 54ea03ccd7 ("package/syslog-ng:
implement systemd enablement using DefaultInstance") replaced the lines
installing the syslog-ng@default file with printf lines creating a file
in a syslog-ng@.service.d/ directory on-the-fly. Since then, nothing
uses the syslog-ng@default file, so let's delete it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The configure script will automatically detect used pkg-config if
libcap or libselinux are available.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass -std=c++11 to fix the following build failure with gcc <= 5:
/tmp/instance-0/output-1/host/bin/mips64el-linux-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -g -DSHA="not available" -o edid-decode edid-decode.cpp parse-base-block.cpp parse-cta-block.cpp parse-displayid-block.cpp parse-ls-ext-block.cpp parse-di-ext-block.cpp parse-vtb-ext-block.cpp -lm
edid-decode.cpp: In member function 'std::__cxx11::string edid_state::dtd_type()':
edid-decode.cpp:192:17: error: 'to_string' is not a member of 'std'
unsigned len = std::to_string(preparse_total_dtds).length();
^
Also add a dependency on gcc 4.7
Fixes:
- http://autobuild.buildroot.org/results/71e4a50542c4551797f1d0404d27244612b427d7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will fix the following build failure when enabling introspection on
libgtk2:
Couldn't find include 'Pango-1.0.gir' (search path: '['/home/fabrice/buildroot/output/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/home/fabrice/buildroot/output/host/share', '/usr/share/gnome/gir-1.0', '/usr/local/share/gir-1.0', '/usr/share/gir-1.0', '/home/fabrice/buildroot/output/host/share/gir-1.0', '/usr/share/gir-1.0']')
Fixes:
- http://autobuild.buildroot.org/results//86c6f55e0bd1a0fe3b70c9e97193aaad94d72a7f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will fix the following build failure when enabling introspection on
libgtk2:
Couldn't find include 'GdkPixbuf-2.0.gir' (search path: '['/tmp/instance-0/output-1/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/tmp/instance-0/output-1/host/share', 'gir-1.0', '/tmp/instance-0/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')
Fixes:
- http://autobuild.buildroot.org/results//86c6f55e0bd1a0fe3b70c9e97193aaad94d72a7f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github to get latest release
- Fix CVE-2019-20805: p_lx_elf.cpp in UPX before 3.96 has an integer
overflow during unpacking via crafted values in a PT_DYNAMIC segment.
- Fix CERT-FI Case 829767 UPX command line tools segfaults.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It is often necessary to refer to other images that are present in
BINARIES_DIR from a custom ubinize configuration e.g. to include the
kernel in a UBI volume.
As we do for BR2_ROOTFS_UBIFS_PATH, replace BINARIES_DIR when copying
the file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[yann.morin.1998@free.fr:
- add the blurb in the help text
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Use the unit type=notify (Redis contacts systemd when ready)
- Start redis with the supervised option, so it knows it should
talk to systemd
- USE_SYSTEMD is not documented, but it is used in the src/Makefile
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr: add and explain USE_SYSTEMD]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TLS support is only enabled when BUILD_TLS is set to 'yes'. Anoy other
value, as well as empty or not set, will disable TLS. However, for
consistency with the rest of the code (e.g. for autotools packages where
we use both the --enable and --disable flags), we explcitly pass
BUILD_TLS=no. This also avoids an environment variable to leak into the
build.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr: add and explain the =no case]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Update dependencies in Config.in because of new requirements
- Update the help text in Config.in to a more recent wording
- Update the hash file to the new 2 spaces convention
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr:
- rewrap help text
- wrap long depends line in comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In linux, newer architectures like ARM64 and RISC-V keep their device
tree sources organized by subdirectories. When these device trees are
installed by the kernel they will keep the directory names. But
buildroot strips the prefixes when installing them into /boot or the
images directory.
Sometimes the bootloader references the device tree by name (e.g.
u-boot has the environment variable 'fdtfile') which also includes
the prefix directory.
Make it possible to keep this prefix during installation, so we can
be compatible with other distributions and make it easier for the
user, because he doesn't have to change that environment variable.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On master, commit 544007dcc4 itroduced patches to fix CVE-2020-11888.
On next, commit 604fe08806 itroduced the exact same patches for the
exact same reason.
But on next, commit 81b3fd8654 bumped the version and dropped the
patches.
When next was merged into master in commit a6569f2b3d, the patches
introduced by 544007dcc4 (on master) were retained.
Fixes:
- http://autobuild.buildroot.org/results/bf305c78dddd035b97e88943a1d19a8ceb6b41f7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: rewrite commit log with detailed explanations]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LICENSE diff:
- This software is copyright (c) 1994-2017 by Gisle Aas.
+ This software is copyright (c) 1994 by Gisle Aas.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LICENSE diff:
- This software is copyright (c) 2018 by Toby Inkster.
+ This software is copyright (c) 2020 by Toby Inkster.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport a patch from upstream to fix the build on certain versions of
gsc, notably:
Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
The upstream patch is simply a change in the gentpl.py script, which is
used to generate parts of the automake machinery, so if we just backport
the upstream patch, we need to call the script to regenerate those files.
However, the modified script is a python script, so we would need to add
a dependency on host-python (2 or 3), which is not so nice.
Furthermore, calling the script is not enough: it needs a specific set
of optionss for each file it is to generate. That set of options is not
static; it is constructed in the convoluted autogen.sh. Calling
autogen.sh is usally not so good an idea in the Buildroot context, and
indeed this fails becasue it calls to autoreconf, but without our
carefuly crafted options and environment variables.
There was a little light in the tunnel, in that autogen.sh can be told
not to run autoreconf, by setting the environemnt variable
FROM_BOOTSTRAP to an non-=empty string, but this is fraught with various
other side-effects, as in that cause, autogen.sh expects to be valled by
an upper sciopt, bootstrap, which is not provided in the tarball
distribution...
So, between all those issues, autogen, bootstrap, and a host-python (2
or 3) dependency, we choose another route: path the script *and* the one
generated file affected by the change. Since that patched file is a .am
file, we also patch the corresponding .in file
However, we're faced with another issue: the other generated file is
now older than the script, so the automake machinery will now want to
re-run autoconf et al during the build step, which is still not a good
idea for us. So we touch the other generated file so it is mopre recent
than the script.
This is still not sufficient, because the patched file also has a
dependency on the generated file, so we need to touch as well.
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=12946
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- keep the hunk about patching gentpl.py
- make it a git-formatted patch
- add the touch
- drastically expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit fa84c176c2 that
replace luabitop by lua_bit32 package when lua 5.1 is used.
Since this change the prosody test in gitlab is fail due to
missing lua-bitops [1]:
Starting prosody:
**************************
Prosody was unable to find lua-bitops
This package can be obtained in the following ways:
Source: http://bitop.luajit.org/
Debian/Ubuntu: sudo apt-get install lua-bitop
luarocks: luarocks install luabitop
WebSocket support will not be available
More help can be found on our website, at https://prosody.im/doc/depends
**************************
The upstream documentation [2] is misleading (or not uptodate)
about lua-bit32 dependency.
Since bitop is builtin since lua5.2, we probably need to select
luabitop package only when lua 5.1 is used as lua interpreter.
Tested with run-tests:
./support/testing/run-tests tests.package.test_prosody.TestProsodyLua51
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/576271975
[2] https://prosody.im/doc/depends#bitop
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since v2.1.2:
https://github.com/FluidSynth/fluidsynth/releases/tag/v2.1.3
- fix a cross-compilation failure from Win32 to WinARM
- fix issues while fluid_player is seeking
- fix a NULL pointer dereference if synth.dynamic-sample-loading is enabled
- fix a NULL pointer dereference in delete_rvoice_mixer_threads()
- fix a NULL pointer dereference in the soundfont loader
- fix dsound driver playing garbage when terminating fluidsynth
- avoid memory leaks when using libinstpatch
./utils/test-pkg --package fluidsynth
6 builds, 1 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* libqmi-glib:
** Fix build with GLib < 2.44.
** Fix UTF-8 string validation when the string contains a trailing NUL byte
(e.g. the Sierra specific "DMS Swi Get Current Firmware" command).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- edid-decode changed from C to C++, adjust make command
accordingly and add BR2_INSTALL_LIBSTDCPP dependency
- now shipping a LICENSE file, change from (gone) edid-decode.c to this one
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
[CVE-2020-10543] Buffer overflow caused by a crafted regular
expression
[CVE-2020-10878] Integer overflow via malformed bytecode produced by a
crafted regular expression
[CVE-2020-12723] Buffer overflow caused by a crafted regular
expression
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch #1. libnuma is now a mandatory dependency. The ostype and
machinetype variables are not used for the Linux target.
Drop patch #3. SH is not a supported target architecture anymore.
Add mandatory dependency on libnuma (numactl). Propagate numactl
architecture dependency.
Update homepage link. The kernel wiki is dead.
Drop Python build time dependency. Python is an optional run-time
dependency.
Add reference to upstream provided tarball hash.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2020-13254: Potential data leakage via malformed memcached keys
In cases where a memcached backend does not perform key validation,
passing malformed cache keys could result in a key collision, and
potential data leakage. In order to avoid this vulnerability, key
validation is added to the memcached cache backends.
- CVE-2020-13596: Possible XSS via admin ForeignKeyRawIdWidget
Query parameters for the admin ForeignKeyRawIdWidget were not properly URL
encoded, posing an XSS attack vector. ForeignKeyRawIdWidget now ensures
query parameters are correctly URL encoded.
For details, see the announcement:
https://docs.djangoproject.com/en/dev/releases/3.0.7/
Additionally, 3.0.5..3.0.7 contains a number of non-security related
bugfixes.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use CROSS_COMPILE for toolchain prefix. Makefile derives CC, AR, and
RANLIB from that.
Remove sed manipulation of the lib/configure script. Host uname is not
used when the HOST variable is set as we do.
Remove sed manipulation of Makefile. Set STRIP to an empty string
instead.
Format hash file with two space separators.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since 1.63:
- 1.64 2020-04-11 Fixed error in definitions of BCM2835_AUX_SPI_STAT_TX_LVL
and BCM2835_AUX_SPI_STAT_RX_LVL
- 1.65, 1.66 2020-04-16 Added support for use of capability cap_sys_rawio
to determine if access to /dev/mem is available for non-root users
That latter part (using capabilities) is not supported, because it is
broken upstream (the code is messed up using two similar #defines to
test and enable it; messy...) Since it previously required root access
to work, and still does now, this is not a regression, so do not add
support for capablities.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: explain why we don't support capabilities]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a security release.
Vulnerabilities fixed:
CVE-2020-8172: TLS session reuse can lead to host certificate verification bypass (High).
CVE-2020-11080: HTTP/2 Large Settings Frame DoS (Low).
CVE-2020-8174: napi_get_value_string_*() allows various kinds of memory corruption (High).
See https://nodejs.org/en/blog/release/v12.18.0/
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2020-11080 Denial of service: Overly large SETTINGS frames
Signed-off-by: Martin Bark <martin@barkynet.com>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Although those patches were properly dropped when the origianl bump was
applied to the next branch (commit 4675c7d441), both net and master also
had a commit that moved the patches around when the csku fork was
removed (commit 58af9a70cc and 20f45029cc, respectively).
This seemed to have caused some confusion with git-merge, though, and
the y re-appeared after the merge.
Remove them again for good, this time.
Fixes: http://autobuild.buildroot.net/results/0adfb031c243709b0bac71599ed419b64cc514a4
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- rewrite commit log to explain why the patches reappeared
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: two sapces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit "cmake: add cmake build support"
(952e1e906avsergeev/c-periphery@d0a973c),
c-periphery implement cmake build, so use cmake-package instead of
generic-package. Due to this, it now builds a shared library, so we
drop the INSTALL_TARGET = NO.
The hash of the license file is updated due to an update in the
copyright year:
- Copyright (c) 2014-2019 vsergeev / Ivan (Vanya) A. Sergeev
+ Copyright (c) 2014-2020 vsergeev / Ivan (Vanya) A. Sergeev
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.6 and uboot to version 2020.04 for
orangepi-zero configuration
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2020-13645: In GNOME glib-networking through 2.64.2, the
implementation of GTlsClientConnection skips hostname verification of
the server's TLS certificate if the application fails to specify the
expected server identity. This is in contrast to its intended
documented behavior, to fail the certificate verification.
Applications that fail to provide the server identity, including Balsa
before 2.5.11 and 2.6.x before 2.6.1, accept a TLS certificate if the
certificate is valid for any host.
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: bump to 2.62.4 rather than 2.64.3]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LIBUSB_1_0_SONAME is detected since version 0.1.6 and
b6f5a2fe12
The detection mechanism is based on sed, here are the more relevant
parts:
shrext_regexp=`echo "$shrext_cmds" | sed 's/\./\\\\./'`
[...]
[AS_VAR_SET([ac_Lib_SONAME], [`ldd conftest$ac_exeext | grep 'lib[$2]'$shrext_regexp | sed 's/^@<:@ \t@:>@*lib[$2]'$shrext_regexp'/lib[$2]'$shrext_regexp'/;s/@<:@ \t@:>@.*$//'`])])
However, this mechanism is broken with sed 4.7 and will return the
following 'silent' error:
checking for SONAME of libusb-1.0... sed: -e expression #1, char 40: Invalid back reference
unknown
Moreover, it also raises the following build failure on one of the
autobuilder because an empty line is added to LIBUSB_1_0_SONAME:
checking for SONAME of libusb-1.0... checking
libusb-1.0.so.0
checking for GNU extensions of errno.h... no
configure: WARNING: cache variable au_cv_lib_soname_LIBUSB_1_0 contains a newline
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libusb.pc
config.status: creating libusb-config
config.status: creating Makefile
config.status: creating libusb/Makefile
config.status: creating examples/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
configure: WARNING: cache variable au_cv_lib_soname_LIBUSB_1_0 contains a newline
[7m>>> libusb-compat 0.1.7 Building[27m
PATH="/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/bin:/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/sbin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1
/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin" /usr/bin/make -j8 -C /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/libusb-compat-0.1.7/
make[1]: Entering directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/libusb-compat-0.1.7'
Makefile:284: *** missing separator. Stop.
We could patch patch m4/au_check_lib_soname.m4 to fix the mechanism
however this is difficult without reproducing the autobuilder failure
and upstream seems dead so just set LIBUSB_1_0_SONAME
Fixes:
- http://autobuild.buildroot.org/results/12d771d85d30594929cfe3e1c783fc70857e7f5f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extract the actual SONAME from the library]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
perf by itself is not a standalone package; instead, it is part of a
bigger package, linux-tools.
Even though perf is the only one to need kernel .config fixups, we still
do it in a generic way, as it blends nicely in the existing variables,
which all use a loop over all the tools.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the linux-headers are configured to use the same source as the
kernel (BR2_KERNEL_HEADERS_AS_KERNEL), and the kernel is configured
to be one of the two CIP versions (BR2_LINUX_KERNEL_LATEST_CIP_VERSION
or BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION), the build fails if the
kernel sources are not already downloaded:
$ cat defconfig
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_LATEST_CIP_VERSION=y
$ make defconfig BR2_DEFCONFIG=$pwd)/defconfig
$ make linux-headers-source
>>> linux-headers 4.19.118-cip25 Downloading
--2020-05-13 19:28:44-- https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.19.118-cip25.tar.xz
Resolving cdn.kernel.org (cdn.kernel.org)... 2a04:4e42:1d::432, 151.101.121.176
Connecting to cdn.kernel.org (cdn.kernel.org)|2a04:4e42:1d::432|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-05-13 19:28:45 ERROR 404: Not Found.
make[1]: *** [package/pkg-generic.mk:171: /home/ymorin/dev/buildroot/O/build/linux-headers-4.19.118-cip25/.stamp_downloaded] Error 1
make: *** [Makefile:23: _all] Error 2
We fix that by adding yet another duplication of information out of
the linux.mk, to use the CIP-specific git tree where to get the
archives as snapshots.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The soon-to-be-released linux 5.7 has changed the way it detects the
ability of gcc to use plugins, when it dropped support for gcc 4.7 or
older [0].
To detect the ability to use gcc plugins, the kernel has to check
whether the host gcc is capable enough to build them.
When we call one of the configurator for the Linux kernel, we explicitly
pass a value of HOSTCC=$(HOSTCC_NOCCACHE), because there might be a
discrepancy between the ncurses headers and libraries as found by the
Linux kconfig build [1] [2].
But then, when we build the kernel, we pass another value to use [3]
HOSTCC="$(HOSTCC) $(HOST_CFLAGS) $(HOST_LDFLAGS)" which boils down to
roughly: gcc -I.../host/include -L.../host/lib -Wl,-rpath,.../host/lib
This is needed so that at build time, the kernel can build host tools
that link with our openssl et al.
So, the two HOSTCC we pass to the kernel may have different behaviours.
For example, on a machine where gmp is missing in the system, it is
available in $(O)/host/ when using an internal toolchain (and under a
few other conditions).
In that case, when configuring the kernel, it decides that the host
compiler can't build plugins, so the dependencies of CONFIG_GCC_PLUGINS
are not met, and that option is not present in the linux' .config file
(neither as "=y" nor as "is not set"). But then, when we build the
kernel, the host compiler suddenly becomes capable of building the
plugins, and the internal syncconfig run by the kernel will notice that
the dependencies of CONFIG_GCC_PLUGINS are now met, and that the user
shall decide on its value. And this blocks a build on an interactive
console (abbreviated):
* Restart config...
* GCC plugins
GCC plugins (GCC_PLUGINS) [Y/n/?] (NEW) _
But most problematic is the behaviour when run in a shell that is not
interactiove (e.g. a CI job or such) (abbreviated):
* Restart config...
* GCC plugins
GCC plugins (GCC_PLUGINS) [Y/n/?] (NEW)
Error in reading or end of file.
Generate some entropy during boot and runtime (GCC_PLUGIN_LATENT_ENTROPY) [N/y/?] (NEW)
Error in reading or end of file.
Randomize layout of sensitive kernel structures (GCC_PLUGIN_RANDSTRUCT) [N/y/?] (NEW)
Error in reading or end of file.
* Memory initialization
Initialize kernel stack variables at function entry
> 1. no automatic initialization (weakest) (INIT_STACK_NONE)
2. zero-init structs marked for userspace (weak) (GCC_PLUGIN_STRUCTLEAK_USER) (NEW)
3. zero-init structs passed by reference (strong) (GCC_PLUGIN_STRUCTLEAK_BYREF) (NEW)
4. zero-init anything passed by reference (very strong) (GCC_PLUGIN_STRUCTLEAK_BYREF_ALL) (NEW)
choice[1-4?]:
Error in reading or end of file.
Poison kernel stack before returning from syscalls (GCC_PLUGIN_STACKLEAK) [N/y/?] (NEW)
Error in reading or end of file.
Enable heap memory zeroing on allocation by default (INIT_ON_ALLOC_DEFAULT_ON) [N/y/?] n
Enable heap memory zeroing on free by default (INIT_ON_FREE_DEFAULT_ON) [N/y/?] n
The most obvious and simple solution would be to unconditionally disable
gcc plugins altogether, in the KCONFIG_FIXUP hook. But that can't work
either, because after applying the fixups, we call olddefconfig (or the
likes) with the incapable HOSTCC, so the disabled option would be removed
anyway, and we'd be back to square one.
So, in addition to the above, we also forcibly hack the same call just
before actually building the kernel.
Note that the two are needed: the one in the fixups is needed for those
that have a system that already allows building gcc plugins, and the
second is needed in the other case, where the system does not allow it
but would work with our additional headers and libs in $(O)/host/. The
two ensure there is a very similar experience in the two situations.
Forcibly disabling the use of gcc plugins is not a regression on our
side: it has never been possible to do so so far. We're now making sure
that can't work by accident.
Reported-by: Ganesh <ganesh45in@gmail.com>,
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Michael Walle <michael.walle@kontron.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While cross-compiling, qt5webengine is building a host tool, 'gn', and
by default wants to link it statically with libstdc++, when the tool is
otherwise dynamically linked with other libraries:
$ ldd 3rdparty/gn/out/Release/gn
linux-vdso.so.1 (0x00007ffc1c999000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f48a3c06000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f48a3be4000)
libc.so.6 => /lib64/libc.so.6 (0x00007f48a3a1b000)
/lib64/ld-linux-x86-64.so.2 (0x00007f48a3c53000)
Not all ditributions have the static libraries installed by default; for
example, on Fedora, libstdc++-static is not installed on a fresh system,
leading to build issues:
[185/185] LINK gn
FAILED: gn
/usr/bin/g++ -O3 -fdata-sections -ffunction-sections -Wl,--gc-sections -Wl,-strip-all -Wl,--as-needed -static-libstdc++ -pthread -o gn -Wl,--start-group tools/gn/gn_main.o base.a gn_lib.a -Wl,--end-group -ldl
/usr/bin/ld : unable to find -lstdc++
[...]
Project ERROR: GN build error!
The root cause is the addition in [0] of a command line option to the
build of gn, that requests static linking with libstdc++ by default.
Explicitly pass that option now, to avoid static linking with libstdc++
and get a fully dynamicallty linked executable:
$ ldd 3rdparty/gn/out/Release/gn
linux-vdso.so.1 (0x00007ffd3f160000)
libstdc++.so.6 => /lib64/libstdc++.so.6 (0x00007f68138e7000)
libpthread.so.0 => /lib64/libpthread.so.0 (0x00007f68138c5000)
libc.so.6 => /lib64/libc.so.6 (0x00007f68136fc000)
libm.so.6 => /lib64/libm.so.6 (0x00007f68135b6000)
/lib64/ld-linux-x86-64.so.2 (0x00007f6813b13000)
libgcc_s.so.1 => /lib64/libgcc_s.so.1 (0x00007f681359c000)
[0] cfab9198a9 (diff-905c8f054808213577c0a92d1b704615)
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Gaël Portay <gael.portay@collabora.com>
[yann.morin.1998@free.fr:
- rewrite the commit log with extra details and explanations
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The current script (S51sysrepo-plugind) is not able to stop the daemon.
Possible options to fix the problem:
A) By adding the "-m -p $PIDFILE" option to start the pid file will be
created but it will not contain the correct PID used by the daemon.
This is obviously because the daemon forks.
B) By not starting the daemon in background (sysrepo-plugind -d) and
let do it by start-stop-daemon with "-b" option. But then the log
messages of the daemon will not longer ends in the syslog but to stderr.
C) Start the daemon without a pidfile and stop the daemon with the
"-x" option.
The only valid option is C to fix that.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: introduce EXECUTABLE]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2020-11739: An issue was discovered in Xen through 4.13.x,
allowing guest OS users to cause a denial of service or possibly gain
privileges because of missing memory barriers in read-write unlock
paths. The read-write unlock paths don't contain a memory barrier. On
Arm, this means a processor is allowed to re-order the memory access
with the preceding ones. In other words, the unlock may be seen by
another processor before all the memory accesses within the "critical"
section. As a consequence, it may be possible to have a writer executing
a critical section at the same time as readers or another writer. In
other words, many of the assumptions (e.g., a variable cannot be
modified after a check) in the critical sections are not safe anymore.
The read-write locks are used in hypercalls (such as grant-table ones),
so a malicious guest could exploit the race. For instance, there is a
small window where Xen can leak memory if XENMAPSPACE_grant_table is
used concurrently. A malicious guest may be able to leak memory, or
cause a hypervisor crash resulting in a Denial of Service (DoS).
Information leak and privilege escalation cannot be excluded.
- Fix CVE-2020-11740: An issue was discovered in xenoprof in Xen through
4.13.x, allowing guest OS users (without active profiling) to obtain
sensitive information about other guests. Unprivileged guests can
request to map xenoprof buffers, even if profiling has not been enabled
for those guests. These buffers were not scrubbed.
- Fix CVE-2020-11741: An issue was discovered in xenoprof in Xen through
4.13.x, allowing guest OS users (with active profiling) to obtain
sensitive information about other guests, cause a denial of service, or
possibly gain privileges. For guests for which "active" profiling was
enabled by the administrator, the xenoprof code uses the standard Xen
shared ring structure. Unfortunately, this code did not treat the guest
as a potential adversary: it trusts the guest not to modify buffer size
information or modify head / tail pointers in unexpected ways. This can
crash the host (DoS). Privilege escalation cannot be ruled out.
- Fix CVE-2020-11742: An issue was discovered in Xen through 4.13.x,
allowing guest OS users to cause a denial of service because of bad
continuation handling in GNTTABOP_copy. Grant table operations are
expected to return 0 for success, and a negative number for errors. The
fix for CVE-2017-12135 introduced a path through grant copy handling
where success may be returned to the caller without any action taken. In
particular, the status fields of individual operations are left
uninitialised, and may result in errant behaviour in the caller of
GNTTABOP_copy. A buggy or malicious guest can construct its grant table
in such a way that, when a backend domain tries to copy a grant, it hits
the incorrect exit path. This returns success to the caller without
doing anything, which may cause crashes or other incorrect behaviour.
- Fix CVE-2020-11743: An issue was discovered in Xen through 4.13.x,
allowing guest OS users to cause a denial of service because of a bad
error path in GNTTABOP_map_grant. Grant table operations are expected to
return 0 for success, and a negative number for errors. Some misplaced
brackets cause one error path to return 1 instead of a negative value.
The grant table code in Linux treats this condition as success, and
proceeds with incorrectly initialised state. A buggy or malicious guest
can construct its grant table in such a way that, when a backend domain
tries to map a grant, it hits the incorrect error path. This will crash
a Linux based dom0 or backend domain.
https://xenproject.org/downloads/xen-project-archives/xen-project-4-13-series/xen-project-4-13-1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The commit [1] "licensing info is only valid for v1.4" fixed the legal-info
issues when a custom ATF tarball or a version from git is used.
But we need to ignore licencing for a used defined official ATF version.
Althougt the ATF version are licensed under BSD-3-Clause, the license
file can be updated between version (for example between v1.4 and v2.0).
Ignore the licencing check if the user provide a custom official version.
[1] d1a61703f7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: use positive logic with the _LATEST option]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For some SoCs (i.e.: i.MX8M Nano for now), the DDR training firmware
in the boot image depends on the type of memory installed on a board
(LPDDR4, DDR4, etc...). The previous patch makes this firmware name
agnostic of the DDR type and uses ddr_fw.bin as a generic name. This
patch makes imx8-bootloader-prepare.sh use this generic name,
independently of the kind board DDR type.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4,
etc.), for which the DDR training is performed in the bootloader.
Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4
(e.g.: NXP's reference board EVK). This patch allows the selection of either
of the binaries used to train the DDR.
Note that DDR and HDMI FW copies are now separated, which makes latter
being properly copied only for the relevant SoC (i.MX8MQ).
Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other
i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
Suggested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[yann.morin.1998@free.fr:
- use the new variable to drive the firmware installation
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that Freescale has been wholly swallowed into NXP, the public-facing
git repositories that were hosting those two packages are no longer
available.
Fortunately, they had been mirrored on Code Aurora forge (a Linux
Foundation project, so relatively stable and trustworthy), which has the
tags we need, and that generates the exact same archives.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit bumps ARC toolchain to arc-2020.03-release.
ARC GNU tools of version arc-2020.03-release bring some quite significant
changes like:
* Binutils 2.34 with additional ARC patches
* GCC 9.3 with additional ARC patches
* glibc 2.30 with additional ARC patches
* GDB 10-prerelease with additional ARC patches
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
5732f86 1.1.1
d8e9b32 pep8
4795bc7 Add Jackson Matheson to contributors
26db934 Merge branch 'master' of https://github.com/ljean/modbus-tk
837a12b Merge pull request #125 from jacksonmatheson/master
07b06f8 Fixed READ_WRITE_MULTIPLE_REGISTERS, added write_starting_address_FC23
Also update hash file formatting (2 spaces).
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit:
- bump Linux & U-Boot to linux4sam-2020.04
- bump at91bootstrap to v3.9.2
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the unconditional CONF_OPTS assignment toward the beginning of
the file, before the conditionals on optional dependencies. And use =
for this unconditional assignment instead of +=. No functional
changes, just to align with the coding style used in most other
packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to an active fork
- Send patch upstream
- Update indentation in hash file (two spaces)
- Fix the following CVEs:
- CVE-2018-14054: A double free exists in the MP4StringProperty class
in mp4property.cpp in MP4v2 2.0.0. A dangling pointer is freed again
in the destructor once an exception is triggered.
Fixed by
f09cceeee5
- CVE-2018-14325: In MP4v2 2.0.0, there is an integer underflow (with
resultant memory corruption) when parsing MP4Atom in mp4atom.cpp.
Fixed by
e475013c6e
- CVE-2018-14326: In MP4v2 2.0.0, there is an integer overflow (with
resultant memory corruption) when resizing MP4Array for the ftyp
atom in mp4array.h.
Fixed by
70d823ccd8
- CVE-2018-14379: MP4Atom::factory in mp4atom.cpp in MP4v2 2.0.0
incorrectly uses the MP4ItemAtom data type in a certain case where
MP4DataAtom is required, which allows remote attackers to cause a
denial of service (memory corruption) or possibly have unspecified
other impact via a crafted MP4 file, because access to the data
structure has different expectations about layout as a result of
this type confusion.
Fixed by
73f38b4296
- CVE-2018-14403: MP4NameFirstMatches in mp4util.cpp in MP4v2 2.0.0
mishandles substrings of atom names, leading to use of an
inappropriate data type for associated atoms. The resulting type
confusion can cause out-of-bounds memory access.
Fixed by
51cb6b36f6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following CVEs:
- CVE-2019-17533: Mat_VarReadNextInfo4 in mat4.c in MATIO 1.5.17 omits
a certain '\0' character, leading to a heap-based buffer over-read in
strdup_vprintf when uninitialized memory is accessed.
- CVE-2019-20017: A stack-based buffer over-read was discovered in
Mat_VarReadNextInfo5 in mat5.c in matio 1.5.17.
- CVE-2019-20018: A stack-based buffer over-read was discovered in
ReadNextCell in mat5.c in matio 1.5.17.
- CVE-2019-20020: A stack-based buffer over-read was discovered in
ReadNextStructField in mat5.c in matio 1.5.17.
- CVE-2019-20052: A memory leak was discovered in Mat_VarCalloc in
mat.c in matio 1.5.17 because SafeMulDims does not consider the
rank==0 case.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gloox is a rock-solid, full-featured Jabber/XMPP client library,
written in clean ANSI C++. It makes writing spec-compliant clients
easy and allows for hassle-free integration of Jabber/XMPP
functionality into existing applications. gloox is released under the
GNU GPLv3. Commercial licensing and support are available.
Signed-off-by: Yair Ben Avraham <yairba@protonmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Installing qt5declarative examples on fast/fast/multicore machines sometimes
failes with a variation of the following error messages:
- Cannot touch [...]/chapter5-listproperties/app.qml: No such file or directory
- Error copying [...]/chapter2-methods/app.qml: Destination file exists
Fix it by using OTHER_FILES instead of a seperate qml files install target
to fix the race between install_target, install_qml and install_sources.
Fixes:
- https://gitlab.com/buildroot.org/buildroot/-/jobs/565470221
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Reworked patch and commit log]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In version 5.6 a minor change was made to this file, stating tht "[a]ll
contributions to the Linux Kernel are subject to this COPYING file",
and hence the hash changed.
We can update the hash, because the licensing information is only
accounted for the "latest" version, so the hash change will not impact
older kernel versions as the user would have to switch to a non-latest
kernel.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The default iamge size is 32MiB, which is quite low by today's standards.
Besides, the AArch64 kernels are relatively big, which leaves not much
room, if at all, for users to experiment on the default image.
Increase the vfat size to a more reasonable 64MiB.
Note that users who derive an in-tree defconfig for their own case will
allways hit any arbitarary size we put here, so they will anyway have to
also derive this template for their own use-cases.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
As reported by Nicolas Carrier on the Buildroot mailing list [1],
there is a new build issue while building a program which interacts with
the u-boot environment. This program uses the headers of the ubootenv
library provided by uboot-tools.
This is an upstream change from uboot [2] adding "#include <env.h>" to
fw_env.h. Adding env.h require a board configuration to build.
But only fw_env.h header is installed in the staging directory by
uboot-tools package, but since it now include env.h the build is broken
because env.h is missing from the staging directory.
It's seems an upstream bug since env_set() is not used in fw_env tool.
Nicolas removed env.h from fw_env tool and fixed it's build issue.
This problem is present since uboot v2019.10, so the uboot version
present in Buildroot 2020.02 is affected.
It's probably not a problem for upstream uboot but it's a problem
for uboot-tools package that build uboot tools without a board
configuration for the target.
[1] http://lists.busybox.net/pipermail/buildroot/2020-April/280307.html
[2] 9fb625ce05
Reported-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: add URL to upstream commit]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
snappy is not a mandatory dependency to build leveldb. Back when it
was introduced in Buildroot, as of version 1.18, the build logic
already made snappy an optional dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Libdrm freedreno depends on BR2_arm || BR2_aarch64 || BR2_aarch64_be
as such we need to propagate those dependencies to mesa's gallium
freedreno driver.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
So far in 2020, Logilin and Tap2Open made some financial donations to
the Buildroot Association, so let's thank them on our sponsors page.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The author has completely ripped off the git tree, so the sources
are no longer available, with that message:
"Please look for alternatives for wiringPi"
And indeed there is a better alternative, using the kernel GPIO
subsystem and drivers.
Note that queezelite looses that functionality now, but upstream
squeezelite has done changes to do without wiringpi (hint for an
upgrade?).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Hiroshi Kawashima <kei-k@ca2.so-net.ne.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original git server on git.xiph.org died, and the Xiph project has
now moved on to host their repositories on gitlab.comn instead.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-13164: In Wireshark 3.2.0 to 3.2.3, 3.0.0 to 3.0.10, and
2.6.0 to 2.6.16, the NFS dissector could crash. This was addressed in
epan/dissectors/packet-nfs.c by preventing excessive recursion, such as
for a cycle in the directory graph on a filesystem.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Describe release engineering and development phases of the project.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the migration from alioth to gitlab, the git repository for ltrace
was not migrated. There is a repository on gitlab.com, owned by the debian
maintainer, but that repository does not contain the sha1 we know of:
https://gitlab.com/cespedes/ltrace
s.b.o. is the only known location so far to host the archive, so switch
to it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- (9.11.18) DNS rebinding protection was ineffective when BIND 9 is
configured as a forwarding DNS server. Found and responsibly reported by
Tobias Klein. [GL #1574]
- (9.11.19) To prevent exhaustion of server resources by a maliciously
configured domain, the number of recursive queries that can be triggered
by a request before aborting recursion has been further limited. Root and
top-level domain servers are no longer exempt from the
max-recursion-queries limit. Fetches for missing name server address
records are limited to 4 for any domain. This issue was disclosed in
CVE-2020-8616. [GL #1388]
- (9.11.19) Replaying a TSIG BADTIME response as a request could trigger an
assertion failure. This was disclosed in CVE-2020-8617. [GL #1703]
Also update the COPYRIGHT hash for a change of copyright year and adjust the
spacing for the new agreements.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selecting "console" for the automatic getty, the buildroot logic
would collide with systemd's internal console detection logic, resulting
in two getty being started on the console.
This commit fixes that by doing nothing when "console" is selected and
letting systemd-getty-generator deal with starting the proper getty.
Note that if something other than the console is selected
* Things will work properly, even if the selected terminal is also the
console
* A getty will still be started on the console.
This is what systemd has been doing on buildroot since the beginning. it
could be disabled but I left it for backward compatibility
Fixes: #12361
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2020-10957: In Dovecot before 2.3.10.1, unauthenticated
sending of malformed parameters to a NOOP command causes a NULL
Pointer Dereference and crash in submission-login, submission, or
lmtp.
- Fix CVE-2020-10958: In Dovecot before 2.3.10.1, a crafted SMTP/LMTP
message triggers an unauthenticated use-after-free bug in
submission-login, submission, or lmtp, and can lead to a crash under
circumstances involving many newlines after a command.
- Fix CVE-2020-10967: In Dovecot before 2.3.10.1, remote
unauthenticated attackers can crash the lmtp or submission process by
sending mail with an empty localpart.
- Drop first patch (already in version) and so autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
CVE-2020-12662: Unbound can be tricked into amplifying an incoming query
into a large number of queries directed to a target.
CVE-2020-12663: Malformed answers from upstream name servers can be used
to make Unbound unresponsive.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We generally use on "depends on" for each toolchain option, so let's
do this as well in package/xerces/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to add the option to compile xerces with network
enabled by default so it can be unselected to compile
without network support.
When network support is enabled the Network Accessor feature
will decode schema urls and if they don't appear as localhost
or local files, it will open a stream (socket) session with
the remote server. In an embedded setting having the option to
disable this allows:
* cleaner audit logging
* smaller security attack surface
* less library dependencies
* no behind the scenes failed session attempts
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I added this package while working for Grandcentrix but
am willing to maintain it further.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
mtdev2tuio breaks the builds every now and then and is not
maintained upstream. It does not seem to be useful any more.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add two spaces in hash file.
Remove patch 0002 as it has been applied upstream.
Release notes:
https://mariadb.com/kb/en/library/mariadb-10323-release-notes/
Changelog:
https://mariadb.com/kb/en/library/mariadb-10323-changelog/
Fixes the following security vulnerabilities:
CVE-2020-2752 - Vulnerability in the MySQL Client product of Oracle MySQL
(component: C API). Supported versions that are affected are 5.6.47 and
prior, 5.7.27 and prior and 8.0.17 and prior. Difficult to exploit
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Client. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Client.
CVE-2020-2812 - Vulnerability in the MySQL Server product of Oracle MySQL
(component: Server: Stored Procedure). Supported versions that are affected
are 5.6.47 and prior, 5.7.29 and prior and 8.0.19 and prior. Easily
exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful attacks
of this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2020-2814 - Vulnerability in the MySQL Server product of Oracle MySQL
(component: InnoDB). Supported versions that are affected are 5.6.47 and
prior, 5.7.28 and prior and 8.0.18 and prior. Easily exploitable
vulnerability allows high privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2020-2760 - Vulnerability in the MySQL Server product of Oracle MySQL
(component: InnoDB). Supported versions that are affected are 5.7.29 and
prior and 8.0.19 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server as well as unauthorized update, insert or
delete access to some of MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github
- Drop patches (already in version)
- Fix the following CVEs:
- CVE-2020-13114: Time consumption DoS when parsing canon array
markers
- CVE-2020-13113: Potential use of uninitialized memory
- CVE-2020-13112: Various buffer overread fixes due to integer
overflows in maker notes
- CVE-2020-0093: read overflow
- CVE-2020-12767: fixed division by zero
https://github.com/libexif/libexif/releases/tag/libexif-0_6_22-release
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Our current host-bison installation is not relocatable, so if you
generate the SDK, and install it in a different location, bison will
no longer work with failures such as:
bison: /home/user/buildroot/output/host/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory
This particular issue is already resolved upstream by the addition of
"relocatable" support, which we enable using --enable-relocatable.
Once this issue is fixed, a second one pops up: the path to the m4
program itself is also hardcoded. So we add a patch to fix that as
well. The patch has been submitted upstream, which have requested for
further refinements not applicable to the Buildroot context; in the
meantime, we carry that patch.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12656
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: add reference to the upstream submission]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Security fixes:
CVE-2020-12243: Fixed slapd to limit depth of nested filters
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
stella converted most of its C-Style arrays to std::array since version
6.1:
0c0f732e5f
However, gcc 5.x does not accept a = {} initialization for std::array:
In file included from src/emucore/ConsoleIO.hxx:18:0,
from src/emucore/Console.hxx:34,
from src/gui/AudioDialog.cxx:22:
src/emucore/Control.hxx:331:71: error: array must be initialized with a brace-enclosed initializer
std::array<bool, 5> myDigitalPinState{true, true, true, true, true};
^
So add a dependency on gcc >= 6 instead of trying to patch the numerous
array initializations to make them compliant with C++11
Fixes:
- http://autobuild.buildroot.org/results/dfd9b901fabf310ed9033b8a012466c565d58684
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ezXML is affected by several CVEs and is not maintained anymore (no
release since 2006) so remove it.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We need to backport a commit to allow us to override the g-ir-scanner
and g-ir-compiler binaries in the gnome module.
By default since meson looks for these binaries as native: true
dependencies it would use the host versions instead of the wrappers
which are not useable for target package builds. Override this behavior
by specifying the correct wrapper binaries in cross-compilation.conf.
Fixes:
http://autobuild.buildroot.net/results/f49/f49bb57a6ec2890f489fbd55ced9c9249d066334/build-end.log
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- expand on why the backported patch does not closely match upstream
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is now forcefully selected by
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS when the kernel is in
charge of building DTBs (BR2_LINUX_KERNEL_DTS_SUPPORT=y). So enabling
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is no longer needed in the 64-bit
defconfigs for Raspberry Pi 3 and 4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is enabled, and the
DTBs are built by Linux (i.e BR2_LINUX_KERNEL_DTS_SUPPORT is enabled),
these DTBs should be built with the -@ Device Tree compiler option, so
that they can be used together with DTB overlays. So let's select
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT in this situation.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12831
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The comment explaining the autoreconf says that we are building from a git
clone - but we are not, currently. However, the reconf is still needed due
to patches modifying ac files.
This commit corrects the comment.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
[yann.morin.1998@free.fr: also mention acincludes.m4]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump to latest upstream commit as it fixes a huge number of CVEs. Some
of them can't be linked to a given commit (e.g.
https://github.com/ckolivas/lrzip/issues/67). Moreover, upstream does
not plan to tag a new release any time soon:
https://github.com/ckolivas/lrzip/issues/99
- Fix CVE-2017-8842: The bufRead::get() function in libzpaq/libzpaq.h in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (divide-by-zero error and application crash) via a crafted
archive.
- Fix CVE-2017-8843: The join_pthread function in stream.c in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (NULL pointer dereference and application crash) via a
crafted archive.
- Fix CVE-2017-8844: The read_1g function in stream.c in liblrzip.so in
lrzip 0.631 allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted archive.
- Fix CVE-2017-8845: The lzo1x_decompress function in lzo1x_d.ch in LZO
2.08, as used in lrzip 0.631, allows remote attackers to cause a
denial of service (invalid memory read and application crash) via a
crafted archive.
- Fix CVE-2017-8846: The read_stream function in stream.c in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (use-after-free and application crash) via a crafted
archive.
- Fix CVE-2017-8847: The bufRead::get() function in libzpaq/libzpaq.h in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (NULL pointer dereference and application crash) via a
crafted archive.
- Fix CVE-2017-9928: In lrzip 0.631, a stack buffer overflow was found
in the function get_fileinfo in lrzip.c:979, which allows attackers to
cause a denial of service via a crafted file.
- Fix CVE-2017-9929: In lrzip 0.631, a stack buffer overflow was found
in the function get_fileinfo in lrzip.c:1074, which allows attackers
to cause a denial of service via a crafted file.
- Fix CVE-2018-5747: In Long Range Zip (aka lrzip) 0.631, there is a
use-after-free in the ucompthread function (stream.c). Remote
attackers could leverage this vulnerability to cause a denial of
service via a crafted lrz file.
- Fix CVE-2018-11496: In Long Range Zip (aka lrzip) 0.631, there is a
use-after-free in read_stream in stream.c, because decompress_file in
lrzip.c lacks certain size validation.
Also:
- update indentation of hash file (two spaces)
- drop patch (already in version)
- manage host-nasm dependency which is enabled by default and has been
fixed by:
9f16f65705
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Mesa chooses the first platform specified in -Dplatforms as the default
EGL native platform. [0]
Configure Options
-D platforms=...
List the platforms (window systems) to support. Its argument is
a comma separated string such as -D platforms=x11,drm. It
decides the platforms a driver may support. The first listed
platform is also used by the main library to decide the native
platform.
This has the effect of breaking EGL applications running on X11 and
possibly Wayland when the first platform specified isn't x11 or wayland,
and EGL_PLATFORM isn't set.
Reorder the specified platforms to use x11, wayland, and drm before
surfaceless, as this is the order chosen by other common distributions,
such as Arch Linux [1], Debian [2], and Fedora [3].
Users preferring drm or surfaceless over x11 or wayland likely know how
to override the native EGL platform, and likely have x11 and wayland
disabled anyway.
[0] https://www.mesa3d.org/egl.html
[1] https://git.archlinux.org/svntogit/packages.git/tree/trunk/PKGBUILD?h=packages/mesa#n45
[2] fb8c1efb57/debian/rules (L38)
[3] https://src.fedoraproject.org/rpms/mesa/blob/master/f/mesa.spec#_337
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, nanopi_neo4 does not need pylibfdt or pyelftools, but only a
host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In fact, roc_pc_rk3399 does not need pylibfdt or pyelftools, but only
a host Python interpreter, to run
./arch/arm/mach-rockchip/make_fit_atf.py.
Since upstream U-Boot commit f05d5743567984b4fff6a862fc0f42760ff135da,
this script no longer needs pyelftools. However, since upstream commit
6d06ea34239ab5099783ce588ad4aead96e1fccb (merged in U-Boot 2020.01),
it requires Python 3.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: update with the new NEEDS_PYTHON semantics]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
U-Boot versions newer than 2020.01 use Python 3.x instead of Python
2.x in various scripts.
We already had the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT and
BR2_TARGET_UBOOT_NEEDS_PYELFTOOLS options, but depending on the U-Boot
version, we now need to indicate if Python 2.x or Python 3.x should be
used.
In addition, it turns out that some U-Boot configurations need a
Python interpreter, without needing pylibfdt or pyelftools. Some of
our defconfigs were abusing the BR2_TARGET_UBOOT_NEEDS_PYLIBFDT option
to make sure a Python interpreter was built.
To solve this issue, we introduce a choice, that let the users specify
what, if any, host python version is needed. The default is 'no', to
preserve the previous behaviour, unless any of the pylibfdt or the
pyelftools options is enabled, in which case we hide the 'no' option,
and use python 2 by default. This dfault is guaranteed by the order of
options in the choice.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- explicitly make the choice a bool
- make BR2_TARGET_UBOOT_NEEDS_PYTHON a blind option
- introduce the 'no' option in the choice
- reword the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We will need this Python 3.x variant of the host-python-pyelftools
package to be able to build some recent versions of U-Boot (>=
2020.01).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-markdown2 through 2.3.8 allows XSS because element names are
mishandled unless a \w+ match succeeds. For example, an attack might use
elementname@ or elementname- with an onclick attribute.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add conditional support to allow the module tools to use openssl
on target to inspect the signature of signed modules. If openssl
is not enabled the modinfo will show a hash algo as unknown.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patches that are now upstream.
We don't need to autoreconf since we are using a release tarball.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also update list of tests incompatible with musl.
Removed patch backported from this release.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Xtensa have added new relocation types R_XTENSA_[NP]DIFF{8,16,32} with
the same properties as the existing types R_XTENSA_DIFF{8,16,32}.
Add them to the list of ignored relocation types.
This fixes the following error when invoking elf2flt on xtensa binaries
built with the recent binutils:
ERROR: reloc type R_XTENSA_PDIFF32 unsupported in this context
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove tinyxml2 dependency as tinyxml2 is not a part of version 0.8.7.
Indeed, tinyxml2 has been added in September 2016 with
49b3fd9d6f
whereas version 0.8.7 has been released in April 2016
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libopcodes was installed in staging/ in commit 6a508d9361 (binutils:
Also install libopcodes in staging), but was not installed in target/
Starting with linux-5.6, perf (linux-tools) will link to libopcodes when
it is present. Since it is available in staging, the build succeeds.
However, libopcodes missing in target, perf fails at runtime:
perf: ...libopcodes-2.33.1.so: cannot open shared object file
Install libopcodes to target as well.
Signed-off-by: Lecopzer Chen <lecopzer@gmail.com>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security vulnerabilities:
CVE-2020-10029: Trigonometric functions on x86 targets suffered from stack
corruption when they were passed a pseudo-zero argument. Reported by Guido
Vranken / ForAllSecure Mayhem.
CVE-2020-1751: A defect in the PowerPC backtrace function could cause an
out-of-bounds write when executed in a signal frame context.
CVE-2020-1752: A use-after-free vulnerability in the glob function when
expanding ~user has been fixed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
- Improve mitigation for CVE-2019-14271 for some nscd configuration.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-markdown2 through 2.3.8 allows XSS because element names are
mishandled unless a \w+ match succeeds. For example, an attack might use
elementname@ or elementname- with an onclick attribute.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-future does not depends on python2.
The package work with python 3.x.
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch to fix availability check for storeRGB32FromARGB32PM_neon(), only
available for arm little-endian.
Fixes:
- http://autobuild.buildroot.net/results/ab623253a6d988f4ee03d292ee85f3455de2ea25
.obj/qimage_conversions.o: In function `convert_generic(QImageData*, QImageData const*, QFlags<Qt::ImageConversionFlag>)':
qimage_conversions.cpp:(.text+0x2598): undefined reference to `storeRGB32FromARGB32PM_neon(unsigned char*, unsigned int const*, int, int, QVector<unsigned int> const*, QDitherInfo*)'
qimage_conversions.cpp:(.text+0x259c): undefined reference to `storeRGB32FromARGB32PM_neon(unsigned char*, unsigned int const*, int, int, QVector<unsigned int> const*, QDitherInfo*)'
.obj/qimage_conversions.o: In function `convert_generic_inplace(QImageData*, QImage::Format, QFlags<Qt::ImageConversionFlag>)':
qimage_conversions.cpp:(.text+0x28fc): undefined reference to `storeRGB32FromARGB32PM_neon(unsigned char*, unsigned int const*, int, int, QVector<unsigned int> const*, QDitherInfo*)'
qimage_conversions.cpp:(.text+0x2900): undefined reference to `storeRGB32FromARGB32PM_neon(unsigned char*, unsigned int const*, int, int, QVector<unsigned int> const*, QDitherInfo*)'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To match the docker-engine version.
./support/testing/run-tests tests.package.test_docker_compose.TestDockerCompose
09:54:39 TestDockerCompose Starting
09:54:40 TestDockerCompose Building
10:45:33 TestDockerCompose Building done
10:46:30 TestDockerCompose Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 3121.828s
OK
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PAHO_HIGH_PERFORMANCE to disable free redefiniton as suggested by
upstream in https://github.com/eclipse/paho.mqtt.c/issues/846.
This will avoid the following build failure on musl:
/tmp/instance-1/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/sched.h:80:17: error: expected declaration specifiers or '...' before string constant
void free(void *);
^
/tmp/instance-1/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/sched.h:80:17: error: expected declaration specifiers or '...' before numeric constant
void free(void *);
^
[ 35%] Building C object src/CMakeFiles/common_obj.dir/Base64.c.o
[ 36%] Building C object src/CMakeFiles/common_obj.dir/SHA1.c.o
make[3]: *** [src/CMakeFiles/common_obj.dir/build.make:284: src/CMakeFiles/common_obj.dir/MQTTReasonCodes.c.o] Error 1
Fixes:
- http://autobuild.buildroot.org/results//fbe57a1602fed331ddff3ff3560dce02573816ff
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libvncclient/cursor.c in LibVNCServer through 0.9.12 has a
HandleCursorShape integer overflow and heap-based buffer overflow via a
large height or width value. NOTE: this may overlap CVE-2019-15690.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch to fix squashfs-tools build failures because
of missing external declaration for fwriter_buffer and
bwriter_buffer.
Fixes:
- http://autobuild.buildroot.net/results/6789b668898245926e0a3a3e7caf823dff515d71
/usr/bin/ld: read_fs.o:(.bss+0x0): multiple definition of `fwriter_buffer'; mksquashfs.o:(.bss+0x400c90): first defined here
/usr/bin/ld: read_fs.o:(.bss+0x8): multiple definition of `bwriter_buffer'; mksquashfs.o:(.bss+0x400c98): first defined here
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Remove double space in AT_SPI2_ATK_SITE
- Add link to upstream sha256 file
- License is LPGL-2.1+ since
468b527d8a
- Switch to meson-package
- Add a patch to disable tests to avoid adding libxml2 dependency
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version)
- Add upstream link on sha256
- License is LGPL-2.1+ since
1256988c43
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add two upstream patches fixing input_event time related
compile failures.
Fixes:
- http://autobuild.buildroot.net/results/3883a948e30cfd235cfca1fb8646fe8032f5e18d
keytable.c: In function 'test_event':
keytable.c:1536:11: error: 'struct input_event' has no member named 'time'; did you mean 'type'?
ev[i].time.tv_sec, ev[i].time.tv_usec,
^~~~
type
keytable.c:1536:30: error: 'struct input_event' has no member named 'time'; did you mean 'type'?
ev[i].time.tv_sec, ev[i].time.tv_usec,
^~~~
type
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
- http://autobuild.buildroot.net/results/af76190876656252eb6f60220cdb1d627a03b7c3
evdevkeyboard/qevdevkeyboardhandler.cpp: In member function ‘void QEvdevKeyboardHandler::switchLed(int, bool)’:
evdevkeyboard/qevdevkeyboardhandler.cpp:153:28: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
::gettimeofday(&led_ie.time, 0);
^~~~
type
evdevtouch/qevdevtouchhandler.cpp: In member function ‘void QEvdevTouchScreenData::processInputEvent(input_event*)’:
evdevtouch/qevdevtouchhandler.cpp:579:29: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
m_timeStamp = data->time.tv_sec + data->time.tv_usec / 1000000.0;
^~~~
type
evdevtouch/qevdevtouchhandler.cpp:579:49: error: ‘struct input_event’ has no member named ‘time’; did you mean ‘type’?
m_timeStamp = data->time.tv_sec + data->time.tv_usec / 1000000.0;
^~~~
type
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cvs is an old package, and it shows:
- CVS is licensed under GPL-1.0+ as stated in README (referenced in source
code) and COPYING files;
- COPYING.LIB also give the terms of LGPL-2.0+, and is referenced by a
few files, like lib/strnlen1.c, mostly vampirised rom older versions
of the GNU C library (glibc);
- additionally, the glob implementation was also grabbed from a more
recent (but still old) glibc version, and is LGPL-2.1+, but there is
no license file associated with it, so we use the header instead.
Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- LGPL-2.0+ is used, reference at least one file
- LGPL-2.1+ is also used
- reword commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BR2_PACKAGE_HOST_ZLIB does not exist, and should anyway not be
selected by the target pigz package.
Signed-off-by: Louis-Paul Cordier <lpdev@cordier.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebase/update disable tests patch.
Replace autotools build system with meson as autotools is deprecated
and will be removed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Irrlicht fail to detect properly the NEON support on aarch64 or ARM with NEON FPU support.
While linking an application with libIrrlicht.so, we get an undefined reference to
png_init_filter_functions_neon.
Some files are missing in the libpng bundled in Irrlicht, in particular arm/arm_init.c [1],
so disable NEON support completely.
This can be reproduced by building minetest using this defconfig for aarch64:
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MINETEST=y
BR2_PACKAGE_MINETEST_CLIENT=y
BR2_PACKAGE_MINETEST_SERVER=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
Or for ARM with NEON FPU support:
BR2_arm=y
BR2_cortex_a15=y
BR2_ARM_FPU_NEON=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MINETEST=y
BR2_PACKAGE_MINETEST_CLIENT=y
BR2_PACKAGE_MINETEST_SERVER=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
[1] https://github.com/glennrp/libpng/tree/v1.6.37/arm
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The openssh package comprises three separate entities: the SSH client, SSH
server, and some SSH key utilities. One may want the client but not the
server, the server but not the client, or maybe only the key utilities.
Add separate options for each entity and update the files installed on
target accordingly.
On an ARM Cortex-A53 configuration, size of stripped binaries are:
Client programs: 2213118 bytes (2161 KB)
usr/bin/ssh,657180
usr/bin/scp,99836
usr/bin/ssh-add,312800
usr/bin/ssh-agent,296428
usr/libexec/ssh-keysign,398908
usr/libexec/ssh-pkcs11-helper,292316
usr/bin/sftp,144992
usr/bin/ssh-copy-id,10658
Server programs: 806840 bytes (787 KB)
usr/libexec/sftp-server,112140
usr/sbin/sshd,694168
etc/init.d/S50sshd,532
Key utilities: 789648 bytes (771 KB)
usr/bin/ssh-keygen,398924
usr/bin/ssh-keyscan,390724
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When NetworkManager is built with ModemManager support, it should only
require the generic ModemManager dependency; it shouldn't configure
which features ModemManager provides.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cbs_jpeg_split_fragment in libavcodec/cbs_jpeg.c in FFmpeg 4.2.2 has a
heap-based buffer overflow during JPEG_MARKER_SOS handling because of a
missing length check.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back in commit [1], a patch fixing an issue a PowerPC issue in gcc was
added in gcc 4.3.3. It was present until gcc 4.9, which itself was
removed in [2]. The patch was dropped starting gcc 5.1 [3] but it's
know to be useful for gcc 4.7.3 [4]. However, even though we no longer
support building any of those older gcc versions, the conditional
patching logic in gcc.mk is still there.
We used to have a patch directory (package/gcc/$(GCC_VERSION)) for
every gcc version available in Buildroot, the apply-patches.sh script
doesn't error out even if
1000-powerpc-link-with-math-lib.patch.conditional is missing.
But with gcc 10, we don't need (for the moment) to apply any patch, so
the patch directory doesn't exist. apply-patches.sh breaks the build
since the patch directory is missing:
Aborting. 'package/gcc/10.1.0' is not a directory.
Since we removed gcc 4.9 last year [2], we can safely remove this code.
Tested using qemu_ppc_virtex_ml507_defconfig.
[1] bb1f42e442
[2] baf1775022
[3] 4deb2d93c5
[4] 197006a41c
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If libapparmor is selected, depend on libapparmor and set -Dapparmor=true
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When we prepare the release, we generate the manual in various formats,
so that it can be consulted locally without needing the miriads of tools
needed to generate it.
However, this creates the temporary .br2-external.* files in the output
directory, and those end up in the release tarball.
This is not a problem in practice, but is not clean.
Run 'distclean' in the output directory, to get rid of everything but
the generated documentation.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
aa-unconfied requires the full version of netstat provided by the net-tools
package. Without the full version, running aa-unconfined will result in the
error:
netstat: invalid option -- 'p'
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- net-ttols is a runtime depednency
- select BB_SHOW_OTHERS
- reorder depends
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The following regex string in rc.apparmor.functions
"^/.*[ \t]+flags[ \t]*=[ \t]*\([ \t]*complain[ \t]*\)[ \t]+{" is broken due to
the unescaped { at the end of the regex pattern.
GNU grep ignors the error. However, the Busybox grep does not and throws the
error "unescaped character {"
Escape the "{" character to fix this issue.
Note: Upstream has rewritten large sections of the rc.apparmor.functions file
and the function this patch fixes will no longer be necessary after the next
version is released. However, it is not possible to easily backport the
upstream patches as the rewrite comes with new features that would not be
possible with a simple patch such as this one.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Do not force c99 mode to be able to remove both patches and because it
does not seem to be motivated. Indeed, even if the second patch was
sucessfully upstreamed. The first one can't be upstreamed as it raises
the following build falure on Solaris 11 (due to mixing c99 and
_POSIX_C_SOURCE):
#if defined(STDC_C99) && (defined(_XOPEN_OR_POSIX) && !defined(XPG6))
#error "Compiler or options invalid for pre-UNIX 03 X/Open applications \
and pre-2001 POSIX applications"
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Between 1.0.32 and 1.0.34, only bug fixes have been merged in
uclibc-ng. All patches can be removed, as they have been applied
upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2020-11945: An issue was discovered in Squid before 5.0.2. A
remote attacker can replay a sniffed Digest Authentication nonce to gain
access to resources that are otherwise forbidden. This occurs because
the attacker can overflow the nonce reference counter (a short integer).
Remote code execution may occur if the pooled token credentials are
freed (instead of replayed as valid credentials).
http://www.squid-cache.org/Advisories/SQUID-2020_4.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
cage v0.1.1 can't build with wlroots 0.10.1, as it uses
a set of wlroots API that are no longer available.
Moving to latest upstream version fixes the issue.
Also:
- added license file information
- updated license file hash
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
"The inclusion of GLU is historical. [...] It's not needed for GLEW to
build or run, but it's opt-out that reason. I'd recommend using
-DGLEW_NO_GLU since GLU is rarely seen in modern codebases nowadays."
https://github.com/nigels-com/glew/issues/192#issuecomment-411641657
This patch prevents libglu being added to the "Requires:" section of
glew.pc fixing libglew detection in the supertuxkart package
-- Checking for module 'glew>=2.1'
-- Package 'glu', required by 'glew', not found
after libglu is removed as dependency of supertuxkart.
Supertuxkart already uses -DGLEW_NO_GLU:
https://github.com/supertuxkart/stk-code/blob/master/CMakeLists.txt#L224
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
"The inclusion of GLU is historical. [...] It's not needed for GLEW to
build or run, but it's opt-out that reason. I'd recommend using
-DGLEW_NO_GLU since GLU is rarely seen in modern codebases nowadays."
https://github.com/nigels-com/glew/issues/192#issuecomment-411641657
Each package using glew.h has to decide whether to use the opt-out for
glu or not. Since supertux does not need libglu we can safely remove
the dependency by adding -DGLEW_NO_GLU to TARGET_CXXFLAGS.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
"The inclusion of GLU is historical. [...] I'd recommend using
-DGLEW_NO_GLU since GLU is rarely seen in modern codebases nowadays."
https://github.com/nigels-com/glew/issues/192#issuecomment-411641657
Add -DGLEW_NO_GLU to get rid of the libglu dependency.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- fix mismatch between OGRE_CXX_FLAGS and OGRE_CXXFLAGS
- also use OGRE_CFLAGS for symetry with OGRE_CXXFLAGS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit e845f9364c ("ne10: bump to v1.2.1") removed arm arch
dependency from the comment. This comment is only relevant to arm.
Furthermore, if a target does not have a NEON unit, there is
nothing a user can do about that condition in Buildroot. Showing
a comment would not be useful, and we're not usually showing any
arch-related comment.
Cc: Cody Guldner <cody.guldner@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: drop the comment, explain why]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Contrary to riscv32, the qemu_riscv64_virt defconfig doesn't needs
any specific change. It could have been updated to Linux 5.4.35 in
the commit 80a044703a.
So, update the kernel version to 5.4.35.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop flask license as the old flask theme has been replaced with the
sphinx_rtd_theme since version 0.17.0 and
8f96cbdabf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Michael Fischer <mf@go-sys.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Under certain circumstances (host distribution, openssl version),
the qemu-system binary fail to start:
qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
There is no problem when only host-qemu is built, but it's linked with /lib64/libcurl.so.4
$ make host-qemu
$ ldd output/host/bin/qemu-system-aarch64
[...]
libcurl.so.4 => /lib64/libcurl.so.4 (0x00007fb21cb57000)
libssh.so.4 => /lib64/libssh.so.4 (0x00007fb21c35d000)
libpsl.so.5 => /lib64/libpsl.so.5 (0x00007fb21c34a000)
libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007fb21c2b4000)
Note: /lib64/libcurl.so.4 is linked with libssh and libssl:
$ ldd /lib64/libcurl.so.4
[...]
libssh.so.4 => /lib64/libssh.so.4 (0x00007f90d8efd000)
libpsl.so.5 => /lib64/libpsl.so.5 (0x00007f90d8eea000)
libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007f90d8e54000)
Continue the build.
$ make
We can notice that qemu_aarch64_virt_defconfig set
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
So host-openssl package is built and this is the problem:
$ ldd output/host/bin/qemu-system-aarch64
[...]
libcurl.so.4 => /lib64/libcurl.so.4 (0x00007f3adb444000)
libssh.so.4 => /lib64/libssh.so.4 (0x00007f3adac4a000)
libpsl.so.5 => /lib64/libpsl.so.5 (0x00007f3adac37000)
libssl.so.1.1 => /home/naourr/buildroot/test/qemu_aarch64_virt_defconfig-master/host/lib/libssl.so.1.1 (0x00007f3adaba8000)
qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
This is due to the build system trying to find libcurl using
pkg-config or curl-config.
libcurl is used by the QEMU Block driver for CURL images and
elf2dmp tool which is not needed.
Instead of adding host-libcurl dependency, we can disable it
entierely.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patches (already in version) and so AUTORECONF
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- curl and tiff are optional dependencies since version 7.0.0 and
db31b6dfa9
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This workaround is not needed as of commit
5cff3a8bdf which properly sets the
PKG_CONFIG_LIBDIR for native: true dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This workaround is not needed as of commit
5cff3a8bdf which properly sets the
PKG_CONFIG_LIBDIR for native: true dependencies.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Previous address is still valid but not used as primary address any
longer
Signed-off-by: Davide Viti <zinosat@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Allow ghostscript to be used by cups for printing.
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Without a source for randomness, qpdf will crash with 'no such file'
error. It's can me tested by command like 'qpd some_pdf.pdf -'.
This problem breaks cups printing.
This patch change configure options to '--with-random=/dev/urandom'
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We no longer need this package specific pkconfig workaround as it is
now applied to all meson packages automatically.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This sets the correct build.pkg_config_path for all meson packages so
that dependencies with native: true will properly use the the host
pkgconfig instead of the target pkgconfig.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the linux kernel will apply some fixups on its .config file,
based on whether some packages are enabled or not. That list of
conditional fixups is getting bigger and bigger with each new package
that needs such fixups, culminating with the pending firewalld one [0].
Furthermore, these fixups are not accessible to packages in br2-external
trees.
Add a new per-package variable, that packages may set to the commands to
run to fixup the kernel .config file, which is added at the end of the
linux' own fixups.
This opens the possibility to write things like;
define FOO_LINUX_CONFIG_FIXUPS
$(call KCONFIG_ENABLE_OPT,BLA)
endef
Of course, it also opens the way to run arbitrary commands in there, but
any alternative that would be declarative only, such as a list of
options to enable or disable (as an example):
FOO_LINUX_CONFIG_FIXUPS = +BAR -FOO +BUZ="value"
.. is not very nice either, and such lists fall flat when a value would
have a space.
For packages that we have in-tree, we can ensure they won't play foul
with their _LINUX_CONFIG_FIXUPS. For packages in br2-external trees,
there's nothing we can do; users already have the opportunity to hack
into the linux configure process by providing LINUX_PRE_CONFIGURE_HOOKS
or LINUX_POST_CONFIGURE_HOOKS anyway...
.. which brings the question of why we don't use that to implement the
per-package fixups. We don't, because _PRE or _POST_CONFIGURE_HOOKS are
run after we run 'make oldconfig' to sanitise the mangled .config.
[0] http://lists.busybox.net/pipermail/buildroot/2020-March/278683.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The kconfig mangling macros currently operate on the caller-supplied
.config file, on the assumption that the caller will always know what
file to mangle.
This was correct so far, as packages would indeed only mangle their
own .config files.
However, the Linux kernel does its mangling based on whether some
other packages are enabled or not. That list of conditional mangling
is getting bigger and bigger with each new package that needs such
mangling, culminating with the pending firewalld one [0]. Furthermore,
this mangling is not accessible to packages in br2-external trees. So
we'll want to have packages provide the mangling commands.
So we'll want the mangling to be done on the Linux' .config file in
the expanding package context, not in the package calling the macros.
But packages do not, and should not have knowledge about where the
.config file is, nor how it is named.
So we make the parameter to specify the .config file to mangle
optional. If it is set, this is what the macros will mangle; if it is
not set, the expanding package's .config file will be used.
This has the added benefit that we do not have to repeat in the
expanding package context the knowledge of how the .config file is
named:
FOO_KCONFIG_DOTCONFIG = .config
define FOO_KCONFIG_FIXUPS_CMDS
$(call KCONFIG_ENABLE_OPT,BLA)
endef
[0] http://lists.busybox.net/pipermail/buildroot/2020-March/278683.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we have three macros that may mangle a .config file. All
three are modeled after the same pattern: removing the existing option
from the .config file, then adding the new definition for that option;
all three also implement that pattern with the same commands: sed and
echo.
This is all good so far, because it was simple enough, and they always
worked on a file passed in parameter.
However, we're soon going to change this file parameter to make it
optional, so that the file will then be auto-deduced for the current
package. In that case, the file to sed and echo into will be a more
complex structure than just the parameter.
As such, move the actual mangling down to a helper macro, that is called
from the three existing ones.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Zoltan Gyarmati <zgyarmati@zgyarmati.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Python support in OpenCV3 indeed requires a glibc or musl toolchain,
but is only available if Python 3.x is enabled, and if we're on an
architecture with Numpy support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-numpy Config.in comment was missing a dependency on
BR2_PACKAGE_PYTHON_NUMPY_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 1.18.0, Numpy only supports Python 3.x, so we make it
depend on BR2_PACKAGE_PYTHON3 and propagate this to its reverse
dependencies.
Also, since upstream commit d630d96598f1b7ea044d60bea8cd2b87778f072a,
the Cython generated files are no longer part of released tarballs,
and therefore Numpy requires python-cython on the host as a build
dependency.
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Cc: Esben Haabendal <esben@geanix.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2020-12268: jbig2_image_compose in jbig2_image.c in Artifex
jbig2dec before 0.18 has a heap-based buffer overflow.
- Add JBIG2DEC_AUTORECONF=YES otherwise build will fail because
install-sh has been removed from the tarball
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The upstream project http://pistache.io/ does not provide release
tarballs. However, commit 73f248acd6db4c53 has been successfully
used for some time now.
The use of BR2_TOOLCHAIN_GCC_AT_LEAST_4_9 is for C++14 support.
Tested it with gcc-linaro-4.9-2016.02-x86_64_arm-linux-gnueabi
and buildroot's ./utils/test-pkg
Pistache does not build with uClibc, the macro RUSAGE_THREAD for
getrusage() is not properly declared. This is an upstream issue:
https://github.com/oktal/pistache/issues/175
Hence the dependecy !BR2_TOOLCHAIN_USES_UCLIBC
Signed-off-by: Thomas Ruschival <thomas@ruschival.de>
[yann.morin.1998@free.fr:
- fix PISTACHE_LICENSE_FILES (missing trailing 'S')
- add hash for license file
- two spaces in license file
- tweaks in commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- ChangeLog:
- compression bomb protection
- memory handling issue found by Oss-Fuzz
- improve handling of anomalies in traffic
- Drop first patch (already in version)
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit b80712a16a ("configs/odroidc2:
remove the defconfig") has removed the odroidc2 defconfig, but left
behind a number of files in board/hardkernel/odroidc2, which are now
unused. Let's remove them.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the version bump to 6.10 the following changes were:
* Fix hash file to two spaces format
* Add patch to respect DESTDIR and optionally install man pages for
mount.smb3 by utilizing CONFIG_MAN.
* Pass -std=gnu11 to fix compile issues found with the sourcery-arm
toolchain with C99 style code errors in smbinfo.c and defintion of
'struct sa' uisng gnu11 for C11 GNU extensions.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
CC: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Update hash file to two space format
* COPYING hash updated due to copyright year
* Patch dropped, as it is now upstream as of
9c55c01604
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- I fixed build problems on cups and cups-filters but don't use them.
- gtest, libpam-radius-auth, libpam-tacplus and perl-file-util were
used in my previous job. I don't have access to the packages that
use them neither to the corresponding test infrastructure anymore.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
* Update hash file to two space format and add hashes from sourceforge
website.
* Drop 0001-Required-fixes-to-compile*.patch as it is included with
new release
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update gettext to 0.20.1 and the respective hashes.
- Remove share/gettext-tiny/m4/lock.m4 from GETTEXT_TINY_EXTRA_GETTEXT_FILES
and the install list, as this file was removed in commit
8c2bfdbddb13a480d88ceac4ab0e5886bda957cb.
Tested with test-pkg -p gettext-tiny in Debian 10 and Centos 7
br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: OK
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: OK
sourcery-arm [6/6]: OK
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update license hash due to http -> https URL changes.
- Depend on host-libtextstyle for host-gettext-gnu.
- Update 0001-error_print_progname.patch to apply cleanly.
- Remove upstream 0002-Update-after-gnulib-changed.patch
- Add 0002-restore-the-ability-to-buld-gettext-tools-seperately-part1.patch
which allows gettext-tools to build with an external libtextstyle.
Tested under Debian 8 with test-pkg -a:
44 builds, 5 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This library provides an easy way to add styling to programs that produce
output to a console or terminal emulator window.
libtextstyle is for you if your application produces text that is more readable
when it is accompanied with styling information, such as color, font
attributes (weight, posture), or underlining.
Our gettext-gnu package currently has HOST_GETTEXT_GNU_SUBDIR = gettext-tools
so we only configure and build the gettext-tools sub-directory. Version 0.20.1
of gettext-gnu now requires libtextstyle, which the subdirectory gettext-tools
does not provide.
We have three options:
1) Add hooks to configure and build libtextstyle as a pre-configure hook in
gettext-gnu, and install it in a pre-install hook.
2) Revert to building the whole of gettext.
3) Add a separate package for libtextstyle.
Here are the results of a test with BR2_JLEVEL=4:
- Only gettext-tools: 38.86s user 22.13s system 124% CPU 49.035 total
- gettext + libtextstyle: 40.78s user 14.57s system 146% CPU 37.817 total
- All of gettext: 203.18s user 122.87s system 161% CPU 3:22.39 total
As seen above, compiling the entire gettext package takes 5x longer than
building libtextstyle and gettext separately!
As such, the best option is option 3, as the time increase to build
libtextstyle is negligible.
Tested with test-pkg -p gettext-tiny in Debian 10 and Centos 7
br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: OK
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: OK
sourcery-arm [6/6]: OK
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Back in 2014, about 6 years ago now, in my infinite wisdom, I
decided that extracting the tzdata source was not necessary for
the target variant, because we would be installing the files
generated by the host variant, in commit 7aad5daa5d (package/tzdata:
only compile the zoneinfo once).
However, that did not account for the fact that we would eventually
like to have the licensing information for tzdata, later added in
2019, in commit 60889ccdf0 (package/tzdata: bump to version 2019b).
However, that last comit only added the license file to the host
variant, without explanations why that was so. It turns out that the
reason it was not added to the target variant is, probably, that he
source code for the target variant is not extracted, and thus saving
the license file fails.
But we really want the license file for what goes on into the target.
So, do extract the source code for the target variant, even if only to
get the license file.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Martin Bark <martin@barkynet.com>
Cc: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
src/LibSupport.h has some logic to find the wordsize of the current
architecture, using an explicit list of CPU architectures. This makes
the build fail on a number of CPU architectures that are not
explicitly handled.
Let's instead use the __WORDSIZE definition of the C library, which is
guaranteed to be available for all CPU architectures.
Fixes:
http://autobuild.buildroot.net/results/a235345477ea2ec3b0dd4ffed4d7667d46caec48/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removed 0001-*.patch as it is included with the maintenance release.
The LICENSE file hash changed due to Copyright year updating to
include 2020.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Alexander Dahl <post@lespocky.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The commit 0f0649140f introduced a change
in the module name: utf8 -> lua-utf8.
The packages-file-list.txt show the change in the files intalled on the rootfs:
[lua-utf8 0.1.2-2 latest version]
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/doc/LICENSE
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/doc/README.md
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/luautf8-0.1.2-2.rockspec
lua-utf8,./usr/lib/luarocks/rocks-5.1/luautf8/0.1.2-2/rock_manifest
lua-utf8,./usr/lib/lua/5.1/lua-utf8.so
[lua-utf8 1.2-0 previous version]
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/doc/README.md
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/utf8-1.2-0.rockspec
lua-utf8,./usr/lib/luarocks/rocks-5.1/utf8/1.2-0/rock_manifest
lua-utf8,./usr/lib/lua/5.1/utf8.so
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/526036036
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a minor release which provides fixes for CVE-2020-11793,
CVE-2020-3887, CVE-2020-3894, and CVE-2020-3899.
Updating from 2.28.0 also brings a few rendering fixes, a build fix
on MIPS64, a build fix for GStreamer 1.12, and solves a couple of
crashes. The full release notes covering 2.28.1 and 2.28.2 can be
found at:
https://webkitgtk.org/2020/04/13/webkitgtk2.28.1-released.htmlhttps://webkitgtk.org/2020/04/24/webkitgtk2.28.2-released.html
A detailed security advisory can be found at:
https://webkitgtk.org/security/WSA-2020-0004.html
Note that the above does not cover all the CVEs, and a new advisory
including them is expected to be published in the next days.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a minor release which provides fixes for CVE-2020-11793,
CVE-2020-3887, CVE-2020-3894, and CVE-2020-3899.
Updating from 2.28.0 also brings a few rendering fixes, a build fix
on MIPS64, a build fix for GStreamer 1.12, and solves a couple of
crashes. The full release notes covering 2.28.1 and 2.28.2 can be
found at:
https://wpewebkit.org/release/wpewebkit-2.28.1.htmlhttps://wpewebkit.org/release/wpewebkit-2.28.2.html
A detailed security advisory can be found at:
https://wpewebkit.org/security/WSA-2020-0004.html
Note that the above does not cover all the CVEs, and a new advisory
including them is expected to be published in the next days.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit ed28a698e3
which I applied locally fo testing, but forgot to reset before
continuing to work on other patches...
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The Qemu version present in readme.txt files was needed when
the Buildroot's Qemu defconfig was tested manually using the
qemu-system-<arch> binary already present on the host.
This information is now incorrect since we are using host-qemu
package, currently at 4.2.0 version, to do a runtime test since
0c79350638.
For m68k-q800, we can use the upstream qemu since 4.2.0 release
[1].
So, remove this line from the readme.txt.
[1] https://www.qemu.org/2019/12/13/qemu-4-2-0/
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mesa3d-headers is a little bit special: it uses the same sources as
the mesa3d package, named just 'mesa' upstream. mesa uses the meson
buildsystem, an that is what we use in the mesa3d package.
However, mesa3d-headers does not install the whole of mesa; it only
installs a select set of headers for those binary blobs that do not
provide them.
mesa does not provide such a feature (only installing headers) with
its meson buildsystem. As a consequence, we've made mesa3d-headers a
generic package, that basically only copies headers over.
Additionally, mesa3d-headers also provides the dri.pc file for when
Xorg is enabled; see 7468b60e7c (package/mesa3d-headers: also install
dri header and .pc file).
We used to manually generate that file from a .in template that was
present in mesa source code at the time it was still using autotools.
But when they switched over to using meson, the template was dropped
[0], and the dri.pc is now entirely generated using meson internals
[1].
So we now have no template present in the source code, so we must
come up with our own. This simplifies the replacement pattern to
just inject the version string.
[0] https://cgit.freedesktop.org/mesa/mesa/commit/?id=158758618264eac113025a86a360dc305ed4498b
[1] https://cgit.freedesktop.org/mesa/mesa/tree/src/mesa/drivers/dri/meson.build?h=19.2#n93
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- entirely rework the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
musl libc uses ELFv2 by default for all PPC64 targets.
Now, OpenSSL libraries built with musl targeting PPC64BE should build
and function as expected.
Signed-off-by: Vincent Fazio <vfazio@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Linux version are changed to the new LTS kernel 5.4.35 for all qemu
defconfigs, except for riscv and csky. Thoses defconfigs are left
unchanged because they require either a custom Linux repository
or a specific kernel header version causing some difficulties when
upgrading to 5.4.35.
Update the nios2-10m50 linux.fragment to update the .dtb build directory
due to a change in kernel 4.20 [1]:
nios2: build .dtb files in dts directory
Align nios2 with other architectures which build the dtb files in the
same directory as the dts files. This is also in line with most other
build targets which are located in the same directory as the source.
This move will help enable the 'dtbs' target which builds all the dtbs
regardless of kernel config.
This transition could break some scripts if they expect dtb files in
the old location.
For x86 and x86_64 kernel, add the CONFIG_PCI symbol due a change in kernel
5.0 [2]. The option was previously enabled by default (default y).
PCI: consolidate PCI config entry in drivers/pci
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci.
Update the kernel of ppc-mac99 defconfig added in Buildroot 2019.08.
This version bump was tested on gitlab [4] using the newly introduced
boot-qemu-image.py script [5].
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=118864869805123bf82d666062542440a0fda5dd
[2] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eb01d42a77785ff96b6e66a2a2e7027fc6d78e4a
[3] a8fac3fcfc
[4] https://gitlab.com/kubu93/buildroot/pipelines/139819874
[5] 0c79350638
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Convert the patch for microblaze kernel added for kernel 3.14 by
Waldemar to git format.
Note: the Waldemar Sob line is missing in the original patch:
fa27985483
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
paho-mqtt-c by default enables the building of test materials and
install of CPack documentation:
PAHO_ENABLE_TESTING - "Build tests and run"
PAHO_ENABLE_CPACK - "Enable CPack"
Let's disable these to save a couple megabytes and time. This is
in keeping with the generic settings in pkg-cmake.mk.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When 4bcc344464 was applied, it was not
noticed that 96dc6701af (from another
contributor) had already been
applied. 4bcc344464 essentially did the
same thing as 96dc6701af, except it also
disable zstd support explicitly in the host-libarchive package.
Let's drop the part of 4bcc344464 that
duplicates 96dc6701af.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The CMakeLists.txt contains:
if(CPPREST_EXCLUDE_COMPRESSION)
if(NOT CPPREST_EXCLUDE_BROTLI)
message(FATAL_ERROR "Use of Brotli requires compression to be enabled")
endif()
libcpprestsdk requires openssl, so if the libopenssl provider is
chosen, it anyway pulls in zlib. But if libressl is used as a
provider, it doesn't pull in zlib, and building libcpprestsdk becomes
possible without zlib thanks to this patch.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Convert the hash file to using the two space format for hashes. The
has for the LICENSE file has been updated since version 6.0.4 now
includes DOS line endings (\r\n).
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some people want to be able to inspect the current state of the build,
and report information about it, like:
- report the number of packages already built out of the total,
- list the packages being actually built (e.g. for TLPB)
- etc...
However, the location where a package is built is inherently an internal
detail, so expose that to the user in the output of show-info. We only
expose the location relative to the base directory (basically, either
output/ or the user-suppiled $(O)), so that show-info does not contain
local information (the output of show-info can be shared).
Interested parties will be able to poke in there to identify the stamp
files and deduce the package's state.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Although most virtual packages do not install anything, some of them
do. For example, the virtual package 'toolchain' does tweak the musl
headers during a post staging hook.
So, it makes sense for "show-info" to report if a virtual package has
its target, staging and/or image installation steps enabled or not.
This commit changes show-info to report the type of install steps for
virtual packages too, which means for all packages.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By their very nature, host packages have no target, staging, or images
install steps; they have a single install step, that is always
performed.
As such, setting the corresponding _INSTALL_{TARGET,STAGING,IMAGES}
variables does not make sense for host packages.
However, people (and scripts) may get confused when they process the
output of printvars, e.g.:
$ make printvars VARS=HOST_LIBTOOL_INSTALL_TARGET
HOST_LIBTOOL_INSTALL_TARGET=YES
Only set those variables for target packages. There is no
corresponding variable for host packages, as they are always installed
(and only once).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By their very nature, host packages have no target, staging, or
images install steps; they have a single install step, that is
always performed.
However, we currently report those three types of install, which
is misleading at best, and really incorrect.
If we were to report any install type for host package, that would
be a single one, and it would always be true.
So, do not report any install type for host packages, as it does
not make sense to report anything that is always true.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Vadim Kochan <vadim4j@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: eeppeliteloop@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When booting with 'console=<empty>' in the kernel command line (as e.g.
U-Boot does with silent flags in effect), opening /dev/console fails.
As per POSIX [0], when iany redirection fails, the shell running exec
shal exit in error. So, when 'console=<empty>' is specified.
/dev/console can't be opened, and the redirection fails, and /init is
killed.
That behaviour was fixed on the kernel side with commit 2bd3a997befc2
(Open /dev/console from rootfs), present since 2.6.34, released in May
2010, so any [dr]ecent kernel will have that fix.
Furthermore, busybox will fix things up anyway (in bb_sanitize_stdio()),
falling back to opening /dev/null if no console is availble. systemd
does a similar thing (in make_console_stdio()), and sysvinit again has
a similar approach (in console_init()).
The archealogy search turned up those relevant commits:
2011-08-04 10a130f91e initramfs/init: make sure that 0, 1, 2 fds are available
introduces the three exec redirections in initramfs
2011-09-06 3fac21ef8d cpio: fix boot with dynamic /dev
introduces the three exec redirections in cpio
2011-09-06 13a3afc536 fs/initramfs: refactor with fs/cpio
dropped the initramfs tweaks to reuse the cpio ones
2012-11-04 e1ebae700a fs/common: Create initial console device
introduces the /dev/console char,5,1 pseudo device creation in
cpio
2018-03-31 dec061adce fs/cpio: don't extend packages' permissions table
switched from the permission-table to a manual mknod to create
/dev/console
The redirections were added before we could guarantee there was a
/dev/console in the rootfs.
We're now guaranteed to have /dev/console in an initramfs, and any recent
kernel will automatically open /dev/console before spawning /init.
The three redirections are useless now, and cause harm under certain
conditions. Drop them.
[0] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_20_01
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Cc: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- extend commit log with the analysis done with Peter
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The reason why the external wireguard kernel module is not allowed with
kernel headers >= 5.6 is that wireguard is included in the upstream kernel
since 5.6 rather than some kind of (fixable) incompatibility issue. Adjust
the comment to make that clear.
While we're at it, drop the redundant !5.6 dependency on the kernel headers
dependency comment. If headers are older than 3.10, then they are also
older than 5.6, so the statement is redundant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop !BR2_PACKAGE_PYTHON3 dependency as SConstruct requires
host-python3 since version 4.1.10 and:
8dd6d47557
- host-python-psutil is needed since 4.1.8 and
ff03811e31
- Drop unneeded host-python-typing dependency
- C++17 and so gcc 7 is required since 4.1.8 and
01d84b2565
- Set --disable-minimum-compiler-version-enforcement as mongodb enforces
gcc >= 8.2 since verson 4.1.8 and
9ac90b128e
- Explictly disable ssl if needed as ssl is enabled by default
- Add host-python-cheetah dependency if needed
- Manage new http-client option added in version 4.1.2 and
4d7dcca91b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Titouan: Fix patch conflicts with master]
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Needed to build mongodb.
With this host variant there is no need to enforce host
python in the original package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since wireguard is built into kernels 5.6 and later we can't build
wireguard-linux-compat on them, so we need to depend on
!BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Actually the install target of some tools like the parser tries to do
an os detection to understand what install and where.
Incidentally, when the install is invoked on SuSE, this will trig a bug
in parallel install which manifests as "target/lib/apparmor: File exists"
error. For this problem, a patch is already sent upstream.
For buildroot instead, the os detection is useless so we disable it
and use a generic install method.
Fixes:
http://autobuild.buildroot.net/results/b18c6a9ce67065dcb7968c6f473b3b403d2925d2
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Latest version of Apache introduce a new apxs with a slightly modified
path handling logic. In order to simplify the crosscompilation, the
software removes the common prefix from bin install dir and build
install dir, but for this to work they both should have a common prefix.
So we introduce a new regexp to fix /usr/bin to staging dir, the regexps
are also fixed to replace only the exact path between double quotes, to
avoid replacing the she-bang line.
Fixes:
http://autobuild.buildroot.net/results/c41f31566974209897a3a1ec35afe2536fb248cchttp://autobuild.buildroot.net/results/b93f19976ce96e79ea159c25ed74a7377c78f334
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- add the last few words about the she-bang blurb
- do not use quotes in the existing /sur/bin regexp
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop first and second patches (already in version)
- Retrieve third patch from upstream
- Retrieve an additionnal patch from upstream
- host-gettext is needed for AM_ICONV since
0512f6d0a0
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As Java is used quite a bit in the enterprise world, having the option to
build the LTS version of OpenJDK is quite convenient and also a requirement
for many companies wanting to use Java.
As such, there are three options:
1) Continue only to support the latest version of OpenJDK.
2) Downgrade our existing OpenJDK package from 14 to 11.
3) Add an option to support either OpenJDK 11 or 14.
OpenJDK 11 and 14 currently have:
- The same configure options.
- The same license files and hashes for those license files.
- The same dependencies.
- The same method to build and install.
As such, supporting both 11 and 14 is not only an easy option to add to
Buildroot, but also a nice feature for users who wish to use Java in an
embedded environment with a company that mandates the use of the LTS version.
To make it explicit that this choice really is about LTS vs. latest, and
not about 11 vs. 14, the options are really named with LTS and LATEST,
so that future defconfigs will not have to migrate when the versions
changes (e.g. we update from 14->15, or from 11 to the next LTS).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- keep latest as the default, for existing defconfigs
- rename options: drop numbers, use LTS and LATEST
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
python-jedi bundles its own copy of typeshed since version 0.14.0 and
7d2b7bb3c1
So add it to the license files (and update indentation of hash file to
two spaces while at it)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Notice: 5.5.x is now EOL, so should be dropped at the next version bump.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some users may require the full JDK on the target to debug their programs.
This change is relatively trivial to add.
While the full JDK does have programs used for compiling on a target,
which is against Buildroot policy, the JDK also has several utilities used for
debugging purposes, which the JRE target does not build, and Buildroot supports
applications used for debugging purposes such as GDB.
As such, JDK support should be available for debugging purposes, and a note in
the Config.in file has been added under the JDK section, which informs the user
that JDK support is for debugging purposes only and that developing on a
target is not supported by Buildroot.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
[yann.morin.1998@free.fr:
- s/OPENJDK_INSTALL_DIR/OPENJDK_VARIANT/
- slightly rewrap help text
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Several directories and files are currently not installed during the
target installation, these include:
- conf
Several configuration files, including security configuration files which
may be necessary for running various java applications.
- legal
This directory contains legal notices that some java applications may
require, as they may print legal information and will throw exceptions at
runtime if the legal files are not present on the system.
- release
This file contains a list of modules included in the image.
Because these directories take up less than of megabyte extra, it is not an
issue to install all of them.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Giving an explicit getty port is not really needed, as we already
spawn a getty on the "console" device, which will match the serial
port passed as console= argument on the kernel command line.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, Buildroot installs the jre libraries using
cp -dprf /build/linux-*-release/images/jre/lib/* $(TARGET_DIR)/usr/lib/
However, if a system has a merged /usr directory, and there is a built kernel
before installing OpenJDK, the installation fails because jre/lib has binary
modules file, which causes the following error: cp: cannot overwrite directory
'/usr/lib/modules with non-directory
The obvious fix is to install the modules to /usr/lib/jvm/ and set the
appropriate rpaths via the --with-extra-ldflags conf option. However, this fix
does not work because the built binaries themselves do not link against
libjava.so
Indeed, running readelf on the built java binary reports the following:
"(RUNPATH) Library runpath: [/usr/lib/jvm]" and /usr/lib/jvm/libjava.so exists.
However, when running the Java binary on the target, the following error
occurs: "Error: could not find libjava.so."
The following is the result of "strace java" ran on the target:
faccessat(AT_FDCWD, "/usr/lib/libjava.so", F_OK) = -1 ENOENT
faccessat(AT_FDCWD, "/usr/jre/lib/libjava.so", F_OK) = -1 ENOENT
newfstatat(AT_FDCWD, "/usr/lib/libjava.so", 0x7ffe7b4af8, 0) = -1 ENOENT
newfstatat(AT_FDCWD, "/usr/lib/jvm/libjli.so", [sic] AT_SYMLINK_NOFOLLOW) = 0
As seen above, the java binary searches for libjli.so in /usr/lib/jvm,
which demonstrates that the java binary searches for some of the
DT_NEEDED libraries using the correct rpath. But libjava.so is not
searched from the rpath; it is instead dl-opened manually, looked for in
the search paths hardcoded to the following directories:
- /usr/lib/
- /usr/jre/lib/
- $(dirname $0)/../lib/
The reason behind the hardcoded paths given by the maintainers is due to
historical purposes for the need to support several java versions at the
same time on a single system, and that changing the above behavior is not
likely to ever happen.
As such, most distributions such as Redhat do the following:
- Create the directory /usr/lib/jvm/java-$(JAVA_VERSION)/
- Install all directories and files found in images/jre to that directory.
- Symlink the binaries to in /usr/lib/jvm/java-$(JAVA_VERSION)/bin to
/usr/bin.
However, because Buildroot does not need to support multiple versions of java
concurrently, there is no need for the additional java-$(JAVA_VERSION)
directory.
To fix the above issue, the following changes are performed:
- Introduce the variable "OPENJDK_INSTALL_BASE" which points to /usr/lib/jvm
- Set the --with-extra-ldflags conf_opt to
"-Wl,-rpath,$(OPENJDK_INSTALL_BASE)/lib,-rpath,
$(OPENJDK_INSTALL_BASE)/lib/$(OPENJDK_JVM_VARIANT)"
- Run "mkdir -p $(TARGET_DIR)/usr/lib/jvm/" in the INSTALL_TARGET_CMDS step.
- Copy both the lib and bin directories to /usr/lib/jvm/
- Symlink the binaries in /usr/lib/jvm/bin/ to /usr/bin.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12751
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
[yann.morin.1998@free.fr: fix two remaining mis-placed '/']
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Prior to commit 4102db0f7a ("package/libglib2: bump to version 2.60.3")
which converted libglib2 to meson, Buildroot used to set a range of
autoconf options to bypass tests that require running binaries.
The meson version of libglib2's build system has many fewer of these
checks, but there are still some and these can be fed the "correct"
answer by adding properties to cross-compilation.conf.
Add the necessary properties to indicate that we have C99 compliant
print functions to avoid pulling in the gnulib fallback.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version includes a new binary named "ualpn", a proxying
ACMEv2 tls-alpn-01 responder.
Signed-off-by: Nicola Di Lieto <nicola.dilieto@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes CVE-2020-1967:
Server or client applications that call the SSL_check_chain() function during
or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a
result of incorrect handling of the "signature_algorithms_cert" TLS extension.
The crash occurs if an invalid or unrecognised signature algorithm is received
from the peer. This could be exploited by a malicious peer in a Denial of
Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this
issue. This issue did not affect OpenSSL versions prior to 1.1.1d.
See https://www.openssl.org/news/secadv/20200421.txt
Also update the hash file to the new two spaces convention
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_SOFT_FLOAT option is lost while loading the defconfig with:
make qemu_ppc_virtex_ml507_defconfig
On powerpc, BR2_POWERPC_SOFT_FLOAT must be used to enable soft
floating point support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_GLMARK2 is lost while loading the defconfig with:
make engicam_imx6qdl_icore_qt5_defconfig
In order to select gmark2 package, BR2_PACKAGE_GLMARK2_FLAVOR_ANY option
must be set.
Based on the defconfig without X11 and wayland package, the only missing
option to select BR2_PACKAGE_GLMARK2_FLAVOR_ANY is BR2_PACKAGE_HAS_UDEV.
The only possible option is to enable one of the udev provider
(eudev or systemd). Select eudev package for /dev management.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig use a custom defconfig file located
in board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig.
BR2_TARGET_UBOOT_BOARD_DEFCONFIG is used to provide the name
of a in-tree defconfig. Since a custom defconfig is used,
this option is lost while loading the defconfig with:
make nanopi_r1_defconfig
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This defconfig loses mesa3d-demo and glmark2 package since commit
5cb821d563 that introduced an
explicit option to enable GLX support.
This fixes the new defconfig check.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
board/amarula/a64-relic/readme.txt makes use the host fastboot utility
to flash the board. However, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT
(which is enabled in the defconfig) has a dependency on
BR2_PACKAGE_HOST_ANDROID_TOOLS, which is not enabled in the
defconfig. Due to this, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y is
lost when loading the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: change to add BR2_PACKAGE_HOST_ANDROID_TOOLS=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
yaml-cpp builds only a static library by default, this will raise a
build failure with upcoming mongodb 4.2.x as reported by Ryan Barnett
due to mongodb linking with a static library that obviously will miss
-fPIC
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 84ba2e8bf5 got the path to
board/friendlyarm/nanopi-neo4/ wrong in the DEVELOPERS file when
adding a new defconfig nanopi_neo4_defconfig. Let's fix the typo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 791292c48d forgot to add
!BR2_PACKAGE_PYTHON dependency, without it the following error will be
raised if the user selects BR2_PACKAGE_PYTHON and python-selinux:
WARNING: unmet direct dependencies detected for BR2_PACKAGE_PYTHON3
Depends on [n]: !BR2_PACKAGE_PYTHON [=y] && BR2_USE_WCHAR [=y] && BR2_USE_MMU [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && !BR2_STATIC_LIBS [=n]
Selected by [y]:
- BR2_PACKAGE_SELINUX_PYTHON [=y] && BR2_USE_MMU [=y] && BR2_USE_WCHAR [=y] && BR2_TOOLCHAIN_HAS_THREADS [=y] && !BR2_STATIC_LIBS [=n]
Fixes:
- No autobuilder failures yet
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: add dependency on MMU]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Also:
* Drop patch 0001 (fix static linking of libmagic) applied upstream
* Add optional dependency on libmatroska
* Add upstream patch to fix building with libmatroska
* Adjust spacing in hash file to 2 spaces
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When host computer has hdf5 library installed, armadillo fails to build with:
[...]
aarch64-buildroot-linux-gnu-g++: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/hdf5/serial'
make[3]: *** [CMakeFiles/armadillo.dir/build.make:63: CMakeFiles/armadillo.dir/src/wrapper1.cpp.o] Error 1
aarch64-buildroot-linux-gnu-g++: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/hdf5/serial'
[...]
This issue seems known and is mentionned in a message, displayed at detection step:
[...]
-- *** If use of HDF5 is causing problems,
-- *** rerun cmake with HDF5 detection disabled:
-- *** cmake -D DETECT_HDF5=false .
--
[...]
nce hdf5 in not supported by buildroot, this patch force disabling this
detection.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr: fix pacakge name in title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream now provides sha256 & sha512 hashes only.
Switch _SITE to https and use upstream-provided xz tarball.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use new upstream URL libzip.org.
Add optional dependency to liblzma introduced with version 1.6.0:
https://libzip.org/news/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For an unknown reason, since bump to version 3.0.0, we got build failure
due to -D_FILE_OFFSET_BITS==64:
/home/naourr/work/instance-2/output-1/host/arm-buildroot-linux-gnueabi/sysroot/usr/include/fts.h:41:3: error: #error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
# error "<fts.h> cannot be used with -D_FILE_OFFSET_BITS==64"
^
Update our workaround to also filter CPPFLAGS fix the issue and seems
right as we're doing it for all the other affected packages
(restorecond, elfutils ...)
Fixes:
- http://autobuild.buildroot.org/results/200fd0accf6a1926251243b05e600fbf591bb3a2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Parallel make used to be broken in exim, as reported in its docs. Now that
line has disappeared from the docs, and parallel make is actually working.
Tested with 'make exim-dirclean ; time make BR2_JLEVEL=999 exim': builds
still succeed and the build time decreases from 34 to 11 seconds on my
host.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 24c66484e1 (package/qt5: bump minimum gcc requirement to 5.0)
increased the dependency on the gcc version, but used the incorrect
BR2_TOOLCHAIN_GCC_AT_LEAST_5_0, instead of BR2_TOOLCHAIN_GCC_AT_LEAST_5.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr:
- also fix pinentry and wireshark
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
The apparmor packages comes with a set of profiles for a class of usual,
mostly server-class programs and daemons.
Even though an embedded device will mostly require custom profiles, the
generic ones may come handy, as they also provide "abstractions", that
can serve as templates for custom profiles.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: split off into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Most utilities are written in python3, except a few that are written in
a mixture of POSIX shell, bash, perl and awk.
The Makefile does not allow installing parts of it, but requiring all of
python3, bash, and perl to install the utils is too much of a
requirement.
Instead, we split the set in two, on one hand the python ones, which we
install when python3 is enabled, and on the other hand, the rest of the
script which we call 'extras', and which we install when all the extra
requirements (bash, perl, and busybox or gawk) are met; if not, then we
remove these extras utils as a post-install hook.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- split into its own patch
- re-arrange the conditions
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
The various AppArmor utilities are spread in a few sub-directories of
the apparmor source tree. For now, we build only the parser, but we'll
soon introduce support for a few other utilities, so we prepare the
package to be able to build more than just the parser, hence the
slightly convoluted build and install commands, and the use of the
APPARMOR_TOOLS and APPARMOR_MAKE_OPTS variables, which will come handy
in the following commits.
We must ensure the version matches that of libapparmor, but there is not
much we can do to enforce that, so as we do for various other packages,
we just add a comment to that effect.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- make it a separate package
- split into its own patch, write a commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Using AppArmor requires support in the kernel, so do for AppArmor what
we did for SElinux, and enabled the necessary options.
Note that a single LSM can be the default one, so as of today, SELinux
wins, by virtue of being the last to be enabled.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- don't force DEFAULT_SECURITY_APPARMOR, it does not exist in all
kernel versions
- move closer to SELinux
- split into its own patch, write a commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: split off into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
The layout of the package is not amenable to building both the library
and the utilities at once, so this package will only install the
library.
The other apparmor-related tools however will almost all want to always
link with the static library (it's hard-coded in their Makefiles, like:
AALIB = -Wl,-Bstatic -lapparmor -Wl,-Bdynamic -lpthread), so we also
force the build of the static library.
The kernel headers 3.16 at least are required, for CAP_AUDIT_READ.
We need to force the C standard to gnu99, otherwise:
- autoconf uses wchar_t in C99 test, so considers it to be missing
on toolchains without wchar, but wchar is not otherwise needed for
libapparmor;
- c99 is not enough, otherwise the build fails with errors like:
kernel.c:503:15: error: expected declaration specifiers or ‘...’ before ‘(’ token
extern typeof((__change_hat)) __old_change_hat __attribute__((alias ("__change_hat")));
^
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: strip down the patch to only build the lib]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Rhys has asked through private e-mail to be removed:
==
Please can I be removed as the developer, as I’m not longer involved.
Cheers Rhys
==
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ntables bundles a mini implementation of gmp that can be used if the
system lacks the full-blown gmp.
Signed-off-by: Adrien Gallouët <adrien@gallouet.fr>
[yann.morin.1998@free.fr:
- explicitly disable mini-gmp when full one is enabled
- reword and expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When host compiler is gcc 10 (for example on Fedora 32), dtc 1.5.1
fail to build with the error:
/usr/bin/ld: dtc-parser.tab.o:(.bss+0x20): multiple definition of `yylloc'; dtc-lexer.lex.o:(.bss+0x0): first defined here
collect2: error: ld returned 1 exit status
dtc 1.6.0 fixes this issue in the commit:
https://git.kernel.org/pub/scm/utils/dtc/dtc.git/commit/?id=0e9225eb0dfec51def612b928d2f1836b092bc7e
Also adopt new spacing convention in .hash files (two spaces).
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
lvmetad is usually combined with event-based system services that
automatically run pvscan --cache on disks added or removed. This
way, the cache is automatically updated with metadata from new disks
when they appear. LVM udev rules and systemd services implement this
automation. Automatic scanning is usually combined with automatic
activation. For more information, see pvscan(8).
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This project is an implementation of the TCG TPM 2.0 specification. It
is based on the TPM specification Parts 3 and 4 source code donated by
Microsoft, with additional files to complete the implementation.
Signed-off-by: Philippe Reynes <philippe.reynes@softathome.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install the sysvinit scripts, for the moment, but not S02sysctl, since
openrc provides /etc/init.d/sysctl.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-std=c++11 is needed to avoid the following build failure with poppler
and gcc 5:
/home/naourr/work/instance-0/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/poppler/cpp/poppler-page.h:40:37: note: C++11 'noexcept' only available with -std=c++11 or -std=gnu++11
/home/naourr/work/instance-0/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/poppler/cpp/poppler-page.h:70:10: error: 'unique_ptr' in namespace 'std' does not name a template type
std::unique_ptr<text_box_data> m_data;
^
Fixes:
- http://autobuild.buildroot.org/results/3428b9017168db9239756dc06cdaa5ae004cab97
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
exFAT filesystem userspace utilities
We need a patch to fix:
error: unknown type name ‘ssize_t’
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package is separated from the regular libfuse package, as it
contains new API (and can co-exist with libfuse).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This adds some instructions on how to build and run images for the OLPC
XO laptops.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Apcupsd is a UPS control system that permits orderly shutdown of your
computer in the event of a power failure.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
many build are broken, that starts by this kind of message:
Warning: could not load configuration file `.../host/etc/luarocks/config.lua` given in environment variable LUAROCKS_CONFIG
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-pyasn and python-pyasn1 packages package the exact same
upstream Python module, pyasn1. However, python-pyasn uses an outdated
version, and shouldn't be used.
We no longer need to depend on BR2_INSTALL_LIBSTDCPP as python-pyasn1
does not depend on it.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-pyasn and python-pyasn1 packages package the exact same
upstream Python module, pyasn1. However, python-pyasn uses an outdated
version, and shouldn't be used.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The python-pyasn and python-pyasn1 packages package the exact same
upstream Python module, pyasn1. However, python-pyasn uses an outdated
version, and shouldn't be used.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A defconfig for the nanopi_neo4 was added in
d1cd9cdf26, but then removed in
8af7b11bd8 because an ARM32 compiler was
needed to build ATF, and this was not supported back then.
Thanks to the addition of package/arm-gnu-a-toolchain/, we can now
re-introduce this defconfig.
Compared to the previous defconfig, the following changes were done:
- enable BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
- bump kernel to 5.4
- increase default rootfs size to 70M
- use mainline u-boot
- switch to Marek Belisko as maintainer
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix serial# variable creation for i.MX8MQ/MM/MN
- improve display selection
- fix fastboot support for boards with 1GB of RAM only
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog:
- fix PMIC issue for i.MX8MMini
- add support for MCP25xxFD SPI to CAN chip
- fix external module build issue for GCC >= 9
- add BD Nano board support
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The i.MX8M Nano is slightly different from the i.MX8M Mini but very
close (pin to pin compatible).
Mainly the Nano version has no VPU and another GPU (GC7000UL).
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Cc: Refik Tuzakli <tuzakli.refik@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Due to migration to pkg-config in php 7.4, the detection of
library dependencies has been changed.
source from php.net:
--with-gd becomes --enable-gd
--with-png-dir has been removed. libpng is required.
--with-zlib-dir has been removed. zlib is required.
--with-freetype-dir becomes --with-freetype
--with-jpeg-dir becomes --with-jpeg
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If tty_handler() resets terminal while pkttyagent is run in background job,
the process gets stopped by SIGTTOU. This impacts systemctl, hence it must
be blocked for a while and then the process gets killed anyway.
Upstream commit: 28e3a6653d8c3777b07e0128a0d97d46e586e311
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch fixes two small memory leaks.
Upstream commit: 28e3a6653d8c3777b07e0128a0d97d46e586e311
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default installed service file is missing a target, which causes preset-all
to not enable the service.
Add the service file to package/polkit with the addition of:
[Install]
WantedBy=multi-user.target
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the volume-label for the vfat partition is a string with
the following pattern: 5934-861D.
Specify the volume-label as "boot" to make it easier to identify it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are muliple generations of OLPC laptops, x86 ones based on
Geode, VIA and ARM based with Marvell Armada. All of boot with
OpenFirmware and share some peripherals.
This patch adds the common files.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Add policy version 32 as a default version of toolchains build with kernel
headers 5.5 or later.
- Add Help text for the above.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The help text was wrong, as it didn't match the actual default values
we were specifying. Indeed, when we specify:
default 31 if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13
default 30 if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_3
It means that the policy version 30 is supported starting from Linux
4.3 included, and that 31 is supported from Linux 4.13 included.
So we shouldn't have:
> 4.3 <= 4.13 30
> 4.13 31
but:
>= 4.3 < 4.13 30
>= 4.13 31
This patch fixes that for all versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Remove upstream patches.
- Modify existing patches to work with 3.0.
- Remove Python2 check, as 3.0 has removed Python2 support.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The released libssh package does wrongly reports the previous version.
This patch fixes the version field in the lib.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OpenRC suports SELinux, so there is no reason to forcibly disable it.
Notice this only allows OpenRC to perform the initial policy load and
set the enforcing mode. In order really use SELinux it's also
necessary to select refpolicy, which provides a policy, and
policycoreutils, which provides restorecon and other SELinux
utilities.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
diff LICENSE:
- Copyright (C) 2013-2019 Gary V. Vaughan
+ Copyright (C) 2013-2020 Gary V. Vaughan
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following dependencies are no longer needed:
- libev
- libavl
- protobuf-c
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This version changes the required dependencies as well as introducing
new bundled ones...
- Switch to the tarball released by upstream.
- Start depending on httpparser, instead of using the bundled one.
- Force using regcomp instead of using a bundled pcre.
- Add license for a bundled wildmatch and sha1.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[yann.morin.1998@free.fr: reorder licenses; two spaces in hash file.]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The support for MacchiatoBin board in U-Boot and Linux has been
significantly improved in the past years. So it no longer makes much
sense to have a separate build configuration based on older vendor
Linux kernel and U-Boot. This commit drops the configuration based on
vendor kernel and U-Boot and renames the mainline-based defconfig.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump Linux to 5.6.3, U-Boot to 2020.01. New kernel and modules based
on arm64 defconfig do not fit into default size filesystem anymore.
So increase filesystem size to 120M.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_TARGET_ROOTFS_EXT2_LABEL now defaults to "rootfs", so repeating
that in those defconfigs is no longer necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the volume-label for the root filesystem partition is a string
wit the following pattern: ad09a287-46a9-4790-ba97-fbbb549e5e96.
Specify the volume-label as "rootfs" to make it easier to identify it.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the volume-label for the vfat partition is a string with
the following pattern: 5934-861D.
Specify the volume-label as "boot" to make it easier to identify it.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since switch to debian in commit
210ccaef57, host-gperf is needed to
generate frametype.c because debian/patches/add-m4-directory.patch
patches Makefile.am. As a side effect, libid3tag tries to generate
frametype.c from frametype.gperf due to following rule:
$(srcdir)/frametype.c: $(srcdir)/frametype.gperf Makefile.am
cd $(srcdir) && \
gperf -tCcTonD -K id -N id3_frametype_lookup -s -3 -k '*' \
frametype.gperf | \
sed -e 's/\(struct id3_frametype\);/\1/' | \
sed -e '/\$$''Id: /s/\$$//g' >frametype.c
If host-gperf is not available, frametype.c will be empty and build with
madplay will fail on:
configure:17243: checking for snd_pcm_open in -lasound
configure:17268: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/powerpc64-linux-gcc -o conftest -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lasound -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lasound -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lid3tag >&5
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64-buildroot-linux-gnu/8.3.0/../../../../powerpc64-buildroot-linux-gnu/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib/libid3tag.so: undefined reference to `id3_frametype_lookup'
Fixes:
- http://autobuild.buildroot.org/results/15a8c7f6e34b26446179c04383719ea71495403e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
EXT_SUFFIX in Python versions > 3.5 contains a platform tag which only applies
to cpython extensions. Given that ctypes.util.find_library does not work on the
target due to the absence of the underlying tools '.so' needs to be added as a
possible suffix for libraries to enable python-iptables to find the iptables
shared libraries.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ctypes.util.find_library() depends on gcc and friends to detect the location of
a given shared library. Given that these are not available on the target and
that python-iptables depends on this functionality we need to work around this.
The SONAMEs of the libc are well known so we try the known ones for glibc,
uClibc and musl.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12271
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package uses ctypes.CDLL extensively which only makes sense when dynamic
libraries are available.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2020-10932: fix side channel in ECC code that allowed an
adversary with access to precise enough timing and memory access
information (typically an untrusted operating system attacking a
secure enclave) to fully recover an ECDSA private key.
- Fix a potentially remotely exploitable buffer overread in a DTLS
client when parsing the Hello Verify Request message.
- Fix bug in DTLS handling of new associations with the same parameters
(RFC 6347 section 4.2.8): after sending its HelloVerifyRequest, the
server would end up with corrupted state and only send invalid records
to the client. An attacker able to send forged UDP packets to the
server could use that to obtain a Denial of Service. This could only
happen when MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE was enabled in
config.h (which it is by default).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit 3a5e6219a2b62af076caa4f37fab9258165ec266 msgpack
is now required.
License hash change is due to date update in upstream commit
cf83d1d429ecebb093f6eaab773bd41c251530ca.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patches.
Remove CVE annotation; issue fixed upstream.
Depend on MMU. Upstream removed support for fork-less targets (commit
48d12f14c9c).
Reformat hashes file with two spaces delimiter. Remove stale 2.79
tarball hash entry.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
By default, exim stores its PID file in /var/spool/exim, and its log
file in /var/spool/exim/log, but it makes a lot more sense to have the
logs in /var/log/exim and the PID file in /var/run/exim.
Using binary name subdirectory in both cases allows for the use of
systemd's LogsDirectory and RuntimeDirectory statements
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch applied upstream in updated form:
2122fe08cc
Added new patch to fix subsequent build error on mips.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add initial support for Nanopi R1 board with below features:
- U-Boot 2019.01
- Linux 5.0
- Default packages from buildroot
Configuration files taken from Armbian:
https://github.com/armbian/build/blob/master/patch
Signed-off-by: Davide Viti <zinosat@gmail.com>
[Thomas: move U-Boot config and DT to board/friendlyarm/nanopi-r1/uboot/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Switched _SITE to https.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The hash of the NOTICE file has changed due to update in copyright year
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2020-1730: Possible DoS in client and server when handling
AES-CTR keys with OpenSSL.
Format hash file with two spaces delimiter.
Cc: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Used to launch qemu tests for various qemu architectures.
Neverthless to say that this file skips any other job
different from qemu (only qemu configurations are
runtime tested).
Add the log generated by Qemu to the build artefacts.
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This script is intended to be used by gitlab CI to test at runtime Qemu
images generated by Buildroot's Qemu defconfigs.
This allows to troubleshoot different issues that may be associated with
defective builds by lanching a qemu machine, sending root password,
waiting for login shell and then perform a shutdown.
This script is inspired by toolchain builder [1] and the Buildroot
testing infrastructure.
The gitlab CI will call this script for each defconfig build but only
Qemu defconfig will be runtime tested, all others defconfig are ignored.
Some Qemu defconfig must be used with a specific Qemu version (fork)
that is not always available, so the script doesn't error out when it
can't spawn a missing command. That condition is anyway printed in the
log.
Finally, the script start Qemu like it's done for the Buildroot
testing infrastructure (using pexpect).
Note:
We noticed some timeout issues with pexpect when the Qemu machine is
powered off. That's because Qemu process doesn't stop even if the
system is halted (after "System halted"). So the script doesn't error
out when such timeout occure. The behaviour depends on the architecture
emulated by Qemu.
[1] https://github.com/bootlin/toolchains-builder/blob/master/build.sh
Signed-off-by: Jugurtha BELKALEM <jugurtha.belkalem@smile.fr>
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit allow to use the post-image script previously added
for each qemu board.
Add "$(BR2_DEFCONFIG)" as post-image script argument to retried
the qemu command line.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit add a post-image script to be used by each qemu board
defconfig in order to generate start-qemu.sh in BINARIES_DIR. The
start-qemu.sh script can be used by Buildroot user to start Qemu
or by a gitlab CI.
To find the correct qemu command line, we use the second post script
argument which must contain "$(BR2_DEFCONFIG)"
BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_DEFCONFIG)"
The post-image script expect something like
"/path/to/qemu_aarch64_virt_defconfig" in BR2_DEFCONFIG.
Doing a basename allow to retrieve the name of the defconfig file that
should match on on the "tag" previously introduced in readme.txt files.
For running in the CI, as well as running from a remote machine (e.g. on
a remote build machine), it is better not to start in graphical mode,
but only with the serial line attached to the terminal. The post-build
script prepares two sets of arguments for each case, graphical or
serial, and stores them in the start-qemu.sh script, which then decodes
which to use, based on an argument on the command line (default is still
graphical)
sh4/sh4eb needs a special handling by adding "-serial stdio -display
none"; others only require "-nographics". Some qemu command lines
already contain "-serial stdio", but that does not play nicely with
"-nographics", we remove that when going serial-only (although this
might seem counter-intuitive).
Finally, we ensure the script uses our qemu-system (if it was built).
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[yann.morin.1998@free.fr:
- drop the knowledge about gitlab-ci, replace with an argument to
pass to start-qemu.sh
- adapt the commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit add the name of the Qemu defconfig file after each
qemu command line in order to retrieve it easily.
Since a readme.txt can be shared between several Qemu defconfig, we
need at least one qemu command line in readme.txt for each defconfig.
For now, ignore the qemu_arm_vexpress_tz_defconfig since it fail to build
due to python script issue [1]. Anyway the arm vexpress boot is tested
with qemu_arm_vexpress_defconfig.
[1] http://lists.busybox.net/pipermail/buildroot/2020-February/273738.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no reason to create boot.scr in board/udoo/neo and later
install it in TARGET_DIR/boot, leaving a stale file behind.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no reason to create boot.scr in board/solidrun/mx6cubox and
later install it in TARGET_DIR/boot, leaving a stale file behind.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no reason to create boot.scr at board/wandboard and later
install it at TARGET_DIR/boot, leaving a stale file behind.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* Update dependency list withn python-entrypoints.
* The need for Python 3.x is no longer only related to
python-secretstorage: python-keyring itself also works only with
Python 3.x
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unlike the other libraries built by azure-iot-sdk-c, libumqtt follows
a regular versioning scheme. It has a libumqtt.so.1 SONAME, with
libumqtt.so.1 being a symlink to libumqtt.so.1.1.11.
However, we currently install the library itself as libumqtt.so to the
target filesystem, which is not its SONAME, which means it cannot be
found by any other library/program linked against it.
This commit fixes that by installing the library as
libumqtt.so.1.1.11, and creating the appropriate symlinks. The static
library installation is not modified.
Signed-off-by: Stephan Hoffmann <stephan.hoffmann@ext.grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As a preparation for adding the creation of some symlinks, let's
factor the library installation into a function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The canonical way to use $(INSTALL) is to have a full destination
path, that includes the file name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original pattern for creating the pid file was:
open_create(pid_file)
write(pid_file, pid)
close(pid_file)
But if a power outage occurs between open_create and write, the file will
be empty and httpd will refuse to start afterwards unless the corrupt pid
file is removed.
This patch uses the pattern:
open_create(temp_pid_file)
write(temp_pid_file)
close(temp_pid_file)
rename(temp_pid_file, pid_file)
which is guaranteed to be atomic, provided that temp_pid_file and pid_file
are located in the same file system, which this patch does by creating
a temporary file name with the pattern:
pid_file_name + random_suffix
Patch is upstream as of
dd10a9352e,
which will be in the next 2.5.x version.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: update to use upstreamed patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9cae8f557b introduced an optional
dependency on GPM, but got the name of the option wrong, and used
GMP. In fact, even the commit title was wrong.
This causes a build failure:
Makefile:578: *** gpm is in the dependency chain of mc that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Fixes:
http://autobuild.buildroot.net/results/52fb92ae7dd55cba7d19862bb6cd89c80da9a4b6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the pkcs11-helper package is selected, add the package to the
dependency list and explicitly set --enable-pkcs11.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
pkcs11-helper is a library that simplifies the interaction with
PKCS#11 providers for end-user applications. Pkcs11-helper allows
using multiple PKCS#11 providers at the same time, enumerating
available token certificates, or selecting a certificate directly by
serialized id, handling card removal and card insert events, handling
card re-insert to a different slot, supporting session expiration and
much more all using a simple API.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add patch to disable internal dynamic zlib library building, fixes
compile failure for static only toolchains (and assimp links
against the static one).
Fixes:
http://autobuild.buildroot.net/results/7c2db184ee200d1719308f38f42382bb39d8d5c6
[13%] Linking C shared library ../../lib/libzlib.so
.../arm-buildroot-linux-uclibcgnueabi/bin/ld: .../host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libc.a(__uClibc_main.os): in function `__uClibc_fini':
__uClibc_main.c:(.text+0x15c): undefined reference to `__fini_array_start'
.../arm-buildroot-linux-uclibcgnueabi/bin/ld: __uClibc_main.c:(.text+0x160): undefined reference to `__fini_array_end'
.../arm-buildroot-linux-uclibcgnueabi/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bumping to kernel 5.5 add many new features compare to
the actual 5.3 used on Beelink GS1.
Which are crypto, USB3, GPU, IR, S/PDIF and RTC.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The U-boot patch has been upstreamed.
Bump U-boot version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The WDT workaround patch has been upstreamed.
Bump to the new ATF version and drop the patch.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds @CMAKE_SYSROOT@ to mariadb_config.c.in. Without it,
mariadb_config and mysql_config incorrectly returns host paths for
include paths and library paths.
The patch has been accepted upstream at
b787c0d69c
Reported-by: Alexey Lukyanchuk <skif@skif-web.ru>
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream libmad is dead since 2004 so switch to debian package to get
two patches that fix the following CVEs:
- CVE-2017-8372: The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to
cause a denial of service (assertion failure and application exit)
via a crafted audio file.
- CVE-2017-8373: The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted audio file.
- CVE-2017-8374: The mad_bit_skip function in bit.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted
audio file.
Moreover:
- Remove third patch (replaced by optimize.diff debian patch)
- Remove fourth patch (same patch than
Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff)
- Remove fifth patch (same patch than libmad.thumb.diff)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream libid3tag is dead since 2004 so switch to debian to get two
patches that fix the following CVEs:
- CVE-2004-2779: id3_utf16_deserialize() in utf16.c in libid3tag
through 0.15.1b misparses ID3v2 tags encoded in UTF-16 with an odd
number of bytes, triggering an endless loop allocating memory until
an OOM condition is reached, leading to denial-of-service (DoS).
- CVE-2017-11550: The id3_ucs4_length function in ucs4.c in libid3tag
0.15.1b allows remote attackers to cause a denial of service (NULL
Pointer Dereference and application crash) via a crafted mp3 file.
- CVE-2017-11551: The id3_field_parse function in field.c in libid3tag
0.15.1b allows remote attackers to cause a denial of service (OOM)
via a crafted MP3 file.
Moreover, drop patch (replaced by add-m4-directory.patch debian patch)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The DTLS support needs either gnutls or openssl, so let's have these
packages as optional dependencies. We prefer gnutls over openssl as
done by upstream in their configure.ac when the user does not provide
any option (which is the case currently)
While there is support for tinydtls, and Buildroot has a tinydtls
package, libcoap is only able to use its own internal library, and
only when static linking is enabled, so we simply disable the use of
tinydtls altogether.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
RabbitMQ now depends on Elixir for the build system.
The log directory is required for the server to start with the default
configuration. This behaviour was changed in v3.7 with the move to erlang-lager
as the logging library.
License changes:
- LICENSE: Added clarification about the licensing of a number of included
dependencies and a URL changed to HTTPS. License remains MPL-1.1
- LICENSE-BSD-base64js: URL changed to https (license text is actually MIT)
- LICENSE-MIT-Flot: year update
- LICENSE-MIT-JQuery164: URL changed to https
- LICENSE-MPL-RabbitMQ: URL changed to https, year update
- LICENSE-MPL2: URL changed to https
Removed licenses:
- LICENSE-APL2-Rebar: Removed dependency
- LICENSE-BSD-gl-Matrix: Removed dependency
- LICENSE-ERL-OTP: Removed license
- LICENSE-MIT-Mochiweb: Removed dependency
- LICENSE-MIT-SockJS: Removed dependency
New licenses:
- LICENSE-APACHE2-excanvas: new bundled dependency (Apache 2)
- LICENSE-BSD-recon: new bundled dependency (BSD 3-clause)
- LICENSE-erlcloud: new bundled dependency (BSD 2-clause)
- LICENSE-httpc_aws: new bundled dependency (BSD 3-clause)
- LICENSE-ISC-cowboy: new bundled dependency (ISC)
- LICENSE-MIT-EJS: new bundled dependency (MIT)
- LICENSE-MIT-Erlware-commons: license was present in 3.6.6 but not included in
the list
- LICENSE-MIT-jQuery: new bundled dependency (MIT)
- LICENSE-MIT-Sammy: new bundled dependency (MIT)
- LICENSE-rabbitmq_aws: new bundled dependency (BSD 3-clause)
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Moving the licenses to a single file name per line and ensuring
they're in alphabetical order makes it easier to see what changed in
case these licenses change.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- There is no incompatibility of this version with php, the issue was
due to libargon2 itself that installs library to lib/x86_64-linux-gnu
on Linux x86_64 host since
d3639142fa
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When libgcrypt is available set default-dnssec to the backwards
compatible allow-downgrade option.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd-homed is a system service that may be used to create, remove,
change or inspect home directories.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[Thomas:
- add missing dependency on kernel headers >= 4.12
- add missing Config.in comment about dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, the jpeg-turbo tools are forcibly removed, but they can be
usefull (e.g. to test performance on the target, or to script batch
conversions).
Add an option to allow keeping them.
Signed-off-by: Clément Péron <peron.clem@gmail.com>
[yann.morin.1998@free.fr
- move the option out of the choice
- move the option to a Config.in.options
- drop the default 'n', which is ... the default
- use positive logic to define the hook
- move definition of the hook in the conditional block
- don't indent the hook assignment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since there is a variable definition between the definition of
BR2_PACKAGE_JPEG and the choice depending on it, the choice is
not indented bewlo the "jpeg support" prompt, like we like to
have:
[*] jpeg support
jpeg variant (jpeg-turbo) --->
Move the BR2_PACKAGE_JPEG right before the choice (really, move
BR2_PACKAGE_JPEG_SIMD_SUPPORT before BR2_PACKAGE_JPEG, but diff
finds the move of BR2_PACKAGE_JPEG is smaller to display):
[*] jpeg support
jpeg variant (jpeg-turbo) --->
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When the 'nvd-path', 'json' and 'html' are used like this:
--html ~/foo
then the tilde expansion is properly done by the shell. However, when
they are used like this:
--html=~/foo
The shell doesn't do the tilde expansion, and pkg-stats doesn't do
it. This commit modifies pkg-stats to ensure that tilde expansion is
done when parsing the 'nvd-path', 'json' and 'html' arguments.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[Thomas: improve commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to allow the host Lua interpreter to load native modules, we
need to enable building liblua.so, by switching from BUILDMODE=static
to BUILDMODE=dynamic.
In addition, since some modules need Lua 5.2 functions, we build the
host Lua interpreter with -DLUA_COMPAT_5_2, when the Lua interpreter
version is 5.3. Note that we are testing the target option
BR2_PACKAGE_LUA_5_3, but this is OK: the host and target Lua
interpreters have the same version.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preparation for the addition of the support for host-luarocks
packages, this commit changes the luarocks logic to use a custom
configuration file in $(HOST_DIR)/etc/luarocks/config.lua instead of
the default
$(HOST_DIR)/etc/luarocks/config-$(LUAINTERPRETER_ABIVER).lua.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: extracted from a larger patch from François]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174 is a superset of
BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174. Drop the redundant
symbol.
Add the full list of license files to
BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174.
Add notice_ath10k_firmware-5.txt license file hash.
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr:
- reorder license files
- rewrap license files to usual style for multi-line variables
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
gr-osmosdr is now python3 only, so drop everything related to python2.
python-cheetah is no longer mandatory, so drop this too.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
2343fd6 v2.9.4
714cbb2 Fix ABI breakage
1c02cb9 Correct test name and numbering
And update hash file formatting (2 spaces).
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 2cc2ae83fc, kodi-pvr-vuplus
has a dependency on json-for-modern-cpp, but the dependency of
json-for-modern-cpp on gcc >= 4.9 was not propagated. Let's fix that.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github
- Remove first patch (already in version)
- Update second patch
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In preparation for the introduction of support for host Luarocks
packages, this commit reworks the luarocks-package infrastructure:
- A number of variables that were defined in
package/luarocks/luarocks-br-config.lua are now passed on the
luarocks command line in $(2)_INSTALL_TARGET_CMDS in
pkg-luarocks.mk.
- The LUAROCKS_CFLAGS logic is moved from
package/luarocks/luarocks.mk to package/pkg-luarocks.mk.
- The LUAROCKS_RUN_ENV variable is no longer needed, as all details
are now passed on the luarocks command line in pkg-luarocks.mk.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since luarocks commit
ffab9f3269,
available since luarocks v3.2.0, LuaJIT is now detected
automatically. It is therefore no longer necessary to explicitly
indicate in lua_interpreter that LuaJIT is used.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
host-gdb was limited to link only with Python 2 although it's possible
to build Python 3 for host. Add the ability to link with Python 3.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
[Thomas: add an option to the choice to not have Python support]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
qt5canvas3d:
- removed with 5.13 according to [1]
qt5webengine:
- remove 0001-pkg_config-Fixes-when-use_sysroot-false.patch
(taken from upstream [2])
- update 3rdparty license hash list and chromium-latest.inc file
[1] https://doc.qt.io/qt-5/whatsnew513.html
[2] a8c8396fd2
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: add Config.in.legacy entry for qt5canvas3d]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of upstream commit 735eb608637e7bbab4082a541ac802cc919fec22,
available since version v20.1.1, support for Python 2.x has been
dropped, and Python >= 3.5 is required. So we make python-txaio depend
on python3, and remove the python2 test of python-txaio.
We also remove the python-six dependency which is no longer used by
txaio, since upstream commit 62b0e7eaa22769687df1de8f57374cb0a42bdc4d.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Select LIBV4L_UTILS so that camera capture pipelines can be
configured.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that MESA3D_OPENGL_EGL is not automatically selected by the mesa3d
etnaviv driver, explicitly select it in the config file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The mesa3d freedreno driver is not usable without the corresponding
libdrm support for this platform, so select LIBDRM_FREEDRENO.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Older toolchains need to include sys/types.h and sys/socket.h before
linux/if.h, RTA_PREF was introduces with linux-4.1.x.
Fixes:
http://autobuild.buildroot.net/results/2d1/2d1a3f82abb8475d39908b22f775c2dac781f330
In file included from ell/rtnl.c:28:0:
.../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:185:19: error: field 'ifru_addr' has incomplete type
.../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:186:19: error: field 'ifru_dstaddr' has incomplete type
.../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:187:19: error: field 'ifru_broadaddr' has incomplete type
.../host/arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:188:19: error: field 'ifru_netmask' has incomplete type
.../arm-buildroot-linux-gnueabi/sysroot/usr/include/linux/if.h:189:20: error: field 'ifru_hwaddr' has incomplete type
ell/rtnl.c: In function 'l_rtnl_route_extract':
ell/rtnl.c:120:8: error: 'RTA_PREF' undeclared (first use in this function)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch that is now upstream.
Removed GENSIO_AUTORECONF as we no longer patch configure.ac.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As assimp fails to use system provided zlib/zip (and is picky
about the provided versions) use assimp contributed one
and backport one part of upstream patch to fix musl compile.
Fixes:
http://autobuild.buildroot.net/results/4b373ae7d8fd40efe3e2592f94f2d769d6a77669
In file included from .../assimp-5.0.1/code/3MF/D3MFExporter.cpp:61:
.../assimp-5.0.1/contrib/zip/src/zip.h:30:15: error: conflicting declaration 'typedef long int ssize_t'
typedef long ssize_t; /* byte count or error */
^~~~~~~
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit dcaf6e75a (package/gcc: pass -Wno-error to debug builds)
introduced non-ASCII characters in a comment, copy-pasted from a
terminal output.
check-package does not like non-ASCII characters, and whines about
them.
Replace the fancy quotes by standard ASCII ones.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2020-11100: In hpack_dht_insert in hpack-tbl.c in the HPACK
decoder in HAProxy 1.8 through 2.x before 2.1.4, a remote attacker can
write arbitrary bytes around a certain location on the heap via a
crafted HTTP/2 request, possibly causing remote code execution.
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream commit
c0223223f8,
which has been part of the releases since v20.1.2 has dropped support
for Python 2.x. So python-autobahn is now only available for Python
3.x.
We therefore remove the Python 2.x autobahn tests, and while at it,
drop the python-six dependency, which is no longer needed since
upstream commit
79bd2ba41b,
part of the releases since v20.1.3.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issue:
* CVE-2020-11501: It was found that GnuTLS 3.6.3 introduced a
regression in the DTLS protocol implementation. This caused the DTLS
client to not contribute any randomness to the DTLS negotiation
breaking the security guarantees of the DTLS protocol.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The dockerCompose runtime test currently fails with:
pkg_resources.ContextualVersionConflict: (idna 2.9 (/usr/lib/python3.8/site-packages), Requirement.parse('idna<2.9,>=2.5'), {'requests'})
This is due to the fact that the python-requests module has a strict
version dependency on the python-idna module: 'idna>=2.5,<2.9'.
Since Buildroot commit 237d31bf52, we're
using python-idna in version 2.9, which no longer matches the version
dependency expressed by python-requests, causing the failure.
Upstream has addressed this issue in commit
c46f55bd48,
which relaxes the version requirement.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/498144417
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since v2.1.1:
https://github.com/FluidSynth/fluidsynth/releases/tag/v2.1.2
- fluidsynth now exits with error when user-provided command-line arguments are out-of-range
- add verbose error logging to opensles and oboe drivers
- fix a memory leak in oboe driver
- fix a NULL dereference in the fluidsynth commandline program
./utils/test-pkg --package fluidsynth
6 builds, 1 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version)
- Update hash of LICENSE.txt: Fixed Apache license not using canonical
version:
9834ee9787
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch because the linker error no longer appears on br-x86-64-musl.
v0.13.0 fixes the following CVEs:
CVE-2019-0205: In Apache Thrift all versions up to and including 0.12.0,
a server or client may run into an endless loop when feed with specific
input data. Because the issue had already been partially fixed in version
0.11.0, depending on the installed version it affects only certain
language bindings.
CVE-2019-0210: In Apache Thrift 0.9.3 to 0.12.0, a server implemented
in Go using TJSONProtocol or TSimpleJSONProtocol may panic when feed with
invalid input data.
Also update the hash file to the new two-spaces convention
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc fails to build in debug build with debug optimisations:
BR2_x86_corei7=y
BR2_ENABLE_DEBUG=y
BR2_DEBUG_3=y
BR2_OPTIMIZE_G=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
which fails with:
../../../../libsanitizer/libbacktrace/../../libbacktrace/elf.c:772:21: error: ‘st.st_mode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return S_ISLNK (st.st_mode);
^
Upstream has been unable to reproduce/fix properly, details:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-03/threads.html#00827
Upstream recommends passing -Wno-error as a workaround, see:
https://gcc.gnu.org/pipermail/gcc-patches/2019-April/519867.html
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add the reproducing defconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ubiformat returns 255 even on successful format actions, since the upgrade
of mtd-utils to version 2.1.1.
Backport an upstream patch that fixes this issue. No new release is made
yet.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: make it explicit it's a backported patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This includes the following changes:
f4b9cde Allow negative offsets
45bf92a Detect sector size if not found in config
9f59db6 uboot_env: remove unused variables
65d243e README: libubootenv is now in oe-core
And update hash file formatting (2 spaces).
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
0001-make-netgroup-support-optional.patch patches configure.ac, but we
don't autoreconf the package, which is not good.
However, simply adding AUTORECONF = YES is not sufficient: polkit
Makefile.am use the automake conditional HAVE_INTROSPECTION, which is
"available" only when the gobject-introspection m4 file is installed.
Since we don't want to make gobject-introspection a mandatory
dependency of polkit, we take a simpler route: add a copy of
introspection.m4 into the polkit source tree. This is only a 142 lines
file, and it can be dropped when
0001-make-netgroup-support-optional.patch is merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ismael Luceno <ismael@iodev.co.uk>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Update site to get latest version
- First patch is not needed since
e7e4868ad7
- Update second patch
- Drop third patch (not needed anymore)
- Update hash of COPYING:
- BSD-2-Clause for Palm source code removed
- Add SUN Microsystems license for g72x files
- Add Apache-2.0 for lang/cmu_grapheme_lex/grapheme_unitran_tables.c
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt -Dintrospection=true.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --with-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt -Dintrospection=true.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, add the gobject-introspection package to
the dependency list and set the conf opt --enable-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the build continue even if some symbols disapear from
the generated dot config file (.config).
This patch add a new check in order to stop the test if one
of the provided symbol is missing. This must be treated as error.
For example, if a symbol disapear due to new dependency constraints.
Inspired by is_toolchain_usable() function from genrandconfig:
https://git.busybox.net/buildroot/tree/utils/genrandconfig?h=2020.02#n164
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
TestPythonPackageBase.config provide already the basic uClibc toolchain.
So by adding the symbols for the linaro toolchain some warning are printed
at while loading the configuration:
.config:16:warning: override: reassigning to symbol BR2_TOOLCHAIN_EXTERNAL
.config:16:warning: override: BR2_TOOLCHAIN_EXTERNAL changes choice state
.config:17:warning: override: reassigning to symbol BR2_TARGET_ROOTFS_CPIO
.config:21:warning: override: BR2_TOOLCHAIN_EXTERNAL_LINARO_ARM changes choice state
So, some symbol disapear from the generated dot config (.config) leading
to an error due to a new check in the testsuite infra.
Since this test should use the Linaro toolchain, remove
TestPythonPackageBase.config add BR2_arm=y and disable the rootfs tar option.
While at it, re-order the options so that they appear in the same
order as they appear in a defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Adam Duskett <Aduskett@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Until now, the lxc test was using the ARM CodeSourcery 2014.05 armv5 toolchain.
But the recent systemd version bump to 245 added a toolchain dependency
on systemd package due to build issues with gcc < 5.0.
Before [1] the lxc test was failing to build with the ARM CodeSourcery 2014.05
toolchain. After [1], the test is faling at runtime since the
"BR2_INIT_SYSTEMD=y" symbol disapear from the dot config (.config) due to
the new toolchain dependency.
Fix this by using the same toolchain as for the systemd tests [2]
[1] 2196ee25ff
[2] b3d979c0d1
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_glxinfo is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_EXTERNAL_LOCALE is only defined for uClibc based
custom external toolchains.
The test_syslinux is using a glibc toolchain, so the
"# BR2_TOOLCHAIN_EXTERNAL_LOCALE is not set" line disapear from
the generated dot config (.config) leading to an error due to
a new check in the testsuite infra.
There is the same problem with:
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_DEBUG=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS=y
BR2_TOOLCHAIN_EXTERNAL_HAS_THREADS_NPTL=y
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configure.py extracts arch, vendor, and os from the passed
toolchain string on line 180. When using ccache, the passed path string is
"/usr/lib64/ccache/g++" which breaks the logic, causing the following error:
Traceback (most recent call last):
File "./configure.py", line 180, in <module>
(t_arch, t_vendor, t_os) = target.split('-')
ValueError: not enough values to unpack (expected 3, got 1)
Use --with-cxx-compiler=$(HOSTCXX_NOCCACHE) instead of $(HOSTCXX) to fix the
above error.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upcoming release of kodi 19.0 will add libudfread as optional
dependency: https://github.com/xbmc/xbmc/pull/17612
Please note that the removed support of libudf was added on the master
branch so we do not need to backport udf support to kodi 18.x:
558b54a79e
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A new DRM platform has landed, now you can choose to build with the
DRM or FDO platform, or neither. If neither are selected, Cog will
fallback to a simple WPE backend like WPEBackend-rdk
(https://github.com/WebPlatformForEmbedded/WPEBackend-rdk).
Don't be confused that in both cases the *wpebackend-fdo* package is
required. This is an unfortunate naming issue.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There is no host variant for SDL2 library in Buildroot.
So the qemu build system will try to detect automatically the
external SDL2 libraries installed on the host.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libSDL2-2.0.so.0 => /lib64/libSDL2-2.0.so.0
Disable explicitely sdl2 options (named sdl) to improve the
build reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
bzip2 support is needed for reading bzip2-compressed dmg images.
But the host-bzip2 is missing from host qemu package dependency,
so the qemu build system will try to detect automatically the
external libbzip2 libraries installed on the host.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libbz2.so.1 => /lib64/libbz2.so.1
or
libbz2.so.1.0 => output/host/lib/libbz2.so.1.0
if host-bzip2 is built before host-qemu.
Disable explicitely bzip2 options to improve the build
reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The vnc support is enabled by default and the build system
will try to detect automatically some external libraries
installed on the host for vnc-png, vnc-jpeg and vnc-sasl.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libpng16.so.16 => /lib64/libpng16.so.16
or
libpng16.so.16 => output/host/lib/libpng16.so.16
if host-libpng is built before host-qemu.
Disable explicitely thoses options to improve the build
reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is no host-libssh in Buildroot, avoid qemu build system
to find libssh from the host.
Under certain circumstances (host distribution, openssl version), the
qemu-system binary fail to start:
host/bin/qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
$ ldd output/host/bin/qemu-system-aarch64
[...]
libssh.so.4 => /lib64/libssh.so.4
Explicitely disable libssh for the host variant.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
After the staging installation, we replace a number of paths in libtool
.la files so that those paths point to STAGING_DIR instead of a location
in the build machine.
However, we replace only paths that start with /usr. And it turns out
that the linux-pam package is configured with --libdir=/lib (linux-pam
seems to always be installed in /lib rather than /usr/lib).
Due to this, libpam.la contains the following line:
libdir='/lib'
When building a configuration that has:
- BR2_ROOTFS_MERGED_USR=y
- BR2_PACKAGE_LINUX_PAM=y
- BR2_PACKAGE_POLKIT=y
on a system that has its system-wide PAM library installed in /lib,
the build fails with:
/lib/libpam.so: file not recognized: File format not recognized
For some reason, libtool searches only in STAGING_DIR/usr/lib, but
when BR2_ROOTFS_MERGED_USR=y, STAGING_DIR/lib points to
STAGING_DIR/usr/lib, so libtool finds libpam.la. And this libpam.la
contains a bogus libdir='/lib' path. libtool then goes on, finds
/lib/libpam.so, and links with it, causing the build failure.
By doing the proper replacement of libdir='/lib', we have a correct
libpam.la, and solve the build issue.
There is no autobuilder failure associated to this issue, as it
requires /lib/libpam.so to exist. This is the case on ArchLinux, on
which Xogium reported the issue, which can also be reproduced in an
ArchLinux container.
Reported-by: Xogium <contact@xogium.me>
Cc: Xogium <contact@xogium.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- tested by manually creating a symlink to libpam.so in /lib
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the dependencies for the init system choice, and the
dependencies for the package, are slightly different, and not in the
same order, the latter making it difficult to assess consistency between
the two.
Fix all that, by cross-duplicating dependencies from the init choice and
the package, and order the dependencies according to the manual (arch
first, toolchain, then the others).
Note that some dependencies are redundant, but kept nonetheless for
correctness:
- BR2_USE_MMU is implied by BR2_TOOLCHAIN_USES_GLIBC, but systemd does
use fork();
- !BR2_STATIC_LIBS is also implied by BR2_TOOLCHAIN_USES_GLIBC, but it
is also inherited from kmod which we select;
- BR2_TOOLCHAIN_HAS_THREADS is also implied by BR2_TOOLCHAIN_USES_GLIBC,
but systemd does use pthread_*() functions.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Kodi plays these files through ffmpeg and does not link to libtheora
anymore, see PR 9686.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix CVE-2020-5291: Bubblewrap (bwrap) before version 0.4.1, if installed
in setuid mode and the kernel supports unprivileged user namespaces,
then the `bwrap --userns2` option can be used to make the setuid process
keep running as root while being traceable. This can in turn be used to
gain root permissions. Note that this only affects the combination of
bubblewrap in setuid mode (which is typically used when unprivileged
user namespaces are not supported) and the support of unprivileged user
namespaces.
Also update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Configure options should be passed via CONF_OPTS not CONF_OTPS.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr: also fix the epoxy ones]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unbound: validating, recursive & caching DNS resolver with
DNSSEC, QNAME minimisation, DNSCrypt and DNS-over-TLS support.
Signed-off-by: Stefan Ott <stefan@ott.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds four new tests for the syslinux bootloader:
- Building on x86, for legacy BIOS
- Building on x86, for EFI BIOS
- Building on x86-64, for legacy BIOS
- Building on x86-64, for EFI BIOS
Runtime testing in Qemu would certainly be possible, but is left as a
future addition to these tests.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following defconfig:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://toolchains.bootlin.com/downloads/releases/toolchains/x86-i686/tarballs/x86-i686--glibc--bleeding-edge-2018.11-1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
fails to build due to missing setjmp/longjmp definitions, which is a
consequence of a change introduced between gnu-efi 3.0.9 and 3.0.10.
This build failure is fixed by adding another syslinux paytch, which
has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the swupdate SYSTEMD option is enabled, systemd needs to be built
before swupdate, otherwise the build fails with:
core/notifier.c:27:10: fatal error: systemd/sd-daemon.h: No such file or directory
27 | #include <systemd/sd-daemon.h>
| ^~~~~~~~~~~~~~~~~~~~~
Of course, it remains up to the user to make sure that the systemd
package is enabled when systemd support is enabled in the swupdate
configuration.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the toolchain being used by the testsuite infra.
The new toolchain 2018.11-1 is based on gcc 8.2, uClibc-ng 1.0.30,
linux-headers 4.14 and binutils 2.31.1.
Enable BR2_TOOLCHAIN_HAS_THREADS_DEBUG that is now required.
The old toolchain 2017.05 is based on gcc 4.9, uClibc-ng 1.0.25,
linux-headers 3.10 and binutils 2.27.
Tested with gitlab
https://gitlab.com/kubu93/buildroot/pipelines/132376578
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has been tested on Nitrogen8M with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Also update the help text as we shouldn't specify a kernel revision. It
is just that this module isn't meant for mainline kernel, only its NXP
forked version.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch which was applied upstream:
bd01ba5a6b
Switched to github helper, upstream does not provide a tarball for this
release.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switched to github helper, upstream does not provide a tarball for this
release.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
*) SECURITY: CVE-2020-1934 (cve.mitre.org)
mod_proxy_ftp: Use of uninitialized value with malicious backend FTP
server. [Eric Covener]
*) SECURITY: CVE-2020-1927 (cve.mitre.org)
rewrite, core: Set PCRE_DOTALL flag by default to avoid unpredictable
matches and substitutions with encoded line break characters.
The fix for CVE-2019-10098 was not effective. [Ruediger Pluem]
The LICENSE file has been updated to fix a s/waranties/warranties/ typo, so
update the hash to match and adjust the spacing to match recent agreements:
-This software is provided "as is" and any express or implied waranties,
+This software is provided "as is" and any express or implied warranties,
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cgit URL is a mirror of the gitlab repository.
The README.md file of the kmscube project also points
to the gitlab repository, so switch the URL accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The sysdig homepage we have points to an "on-sale" domain, that is
purportedly serving malware while at it. Update to point to the wiki on
github instead.
Fixes#12746.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- use wiki instead of git repo
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
"This release fixes three security issues in ntpd and provides 46
bugfixes and addresses 4 other issues." [1]
NONE: Sec 3610: process_control() should bail earlier on short packets.
MEDIUM: Sec 3596: Unauthenticated ntpd may be susceptible to IPv4 spoof
attack from highly predictable transmit timestamps.
MEDIUM: Sec 3592: DoS Attack on unauthenticated client.
The fix for https://bugs.ntp.org/3445 introduced a bug whereby a system that
is running ntp-4.2.8p12 (possibly earlier) or p13 that only has one
unauthenticated time source can be attacked in a way that causes the
victim's next poll to its source to be delayed, for as long as the attack is
maintained.
[1] http://support.ntp.org/bin/view/Main/SecurityNotice#March_2020_ntp_4_2_8p14_NTP_Rele
The copyright year has changed in the COPYRIGHT file, so adjust the hash to
match and adjust the spacing to match recent agreements:
@@ -3,7 +3,7 @@
jpg "Clone me," says Dolly sheepishly.
- Last update: 2-Jan-2017 11:58 UTC
+ Last update: 4-Feb-2020 23:47 UTC
__________________________________________________________________
The following copyright notice applies to all files collectively called
@@ -32,7 +32,7 @@
Burnicki is:
***********************************************************************
* *
-* Copyright (c) Network Time Foundation 2011-2017 *
+* Copyright (c) Network Time Foundation 2011-2020 *
* *
* All Rights Reserved *
* *
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Peter: clarify security impact, document COPYRIGHT change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The help text of BR2_LINUX_KERNEL_IMAGE_NAME is somewhat incomplete,
in the sense that it assumes just a filename can be passed, while it
can be a relative path, such as 'compressed/vmlinux.bin.z'. So make it
clear that such paths are relative to arch/ARCH/boot/.
Also, drop the part about this being only useful for Xtensa as this is
not true: on MIPS it might be needed as well for some specific image
types.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel image is typically found in arch/ARCH/boot/, which is
why LINUX_IMAGE_PATH is defined as:
LINUX_IMAGE_PATH = $(LINUX_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
However, on MIPS, some kernel image types are available from
arch/mips/boot/compressed, or even at the top-level directory. For
such cases, LINUX_IMAGE_NAME might be set (using
BR2_LINUX_KERNEL_IMAGE_NAME) to values such as:
compressed/vmlinux.bin.z
or
../../../uzImage.bin
Except that the line:
$(INSTALL) -m 0644 -D $(LINUX_IMAGE_PATH) $(1)/$(LINUX_IMAGE_NAME)
will lead to such images be installed in:
$(TARGET_DIR)/boot/compressed/vmlinux.bin.z
$(BINARIES_DIR)/compressed/vmlinux.bin.z
and:
$(TARGET_DIR)/boot/../../../uzImage.bin
$(BINARIES_DIR)/../../../uzImage.bin
which of course is completely bogus.
So let's install them under their name, not their full relative path
to arch/ARCH/boot/.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues (1.1.1e):
CVE-2019-1551 [Low severity]: There is an overflow bug in the x64_64
Montgomery squaring procedure used in exponentiation with 512-bit moduli.
No EC algorithms are affected. Analysis suggests that attacks against
2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a result of this defect
would be very difficult to perform and are not believed likely. Attacks
against DH512 are considered just feasible. However, for an attack the
target would have to re-use the DH512 private key, which is not recommended
anyway. Also applications directly using the low level API BN_mod_exp may
be affected if they use BN_FLG_CONSTTIME. Reported by OSS-Fuzz and Guido
Vranken.
https://www.openssl.org/news/secadv/20191206.txt
CVE-2019-1563 [Low severity]: In situations where an attacker receives
automated notification of the success or failure of a decryption attempt an
attacker, after sending a very large number of messages to be decrypted, can
recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted
message that was encrypted with the public RSA key, using a Bleichenbacher
padding oracle attack. Applications are not affected if they use a
certificate together with the private RSA key to the CMS_decrypt or
PKCS7_decrypt functions to select the correct recipient info to decrypt.
Reported by Bernd Edlinger.
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following commit eee96b0f0a that adds a
gcc patch for OpenRISC, the OpenRISC pre-built toolchain was
rebuilt. Let's use this new toolchain version for the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other changes:
- Change the site URL as the upstream project has migrated to Github
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect
indication of disconnection in certain situations because source address
validation is mishandled. This is a denial of service that should have
been prevented by PMF (aka management frame protection). The attacker
must send a crafted 802.11 frame from a location that is within the
802.11 communications range.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect
indication of disconnection in certain situations because source address
validation is mishandled. This is a denial of service that should have
been prevented by PMF (aka management frame protection). The attacker
must send a crafted 802.11 frame from a location that is within the
802.11 communications range.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2017-6892: In libsndfile version 1.0.28, an error in the
"aiff_read_chanmap()" function (aiff.c) can be exploited to cause an
out-of-bounds read memory access via a specially crafted AIFF file.
- Fix CVE-2017-8361: The flac_buffer_copy function in flac.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(buffer overflow and application crash) or possibly have unspecified
other impact via a crafted audio file.
- Fix CVE-2017-8362: The flac_buffer_copy function in flac.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(invalid read and application crash) via a crafted audio file.
- Fix CVE-2017-8363: The flac_buffer_copy function in flac.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted
audio file.
- Fix CVE-2017-8365: The i2les_array function in pcm.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(buffer over-read and application crash) via a crafted audio file.
- Fix CVE-2017-12562: Heap-based Buffer Overflow in the
psf_binheader_writef function in common.c in libsndfile through 1.0.28
allows remote attackers to cause a denial of service (application
crash) or possibly have unspecified other impact.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If python or python3 is selected, nftables should depend on the package
and set the --enable-python option, otherwise set --disable-python
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump to the latest kmscube version.
Since kmscube has been converted to meson, adjust the .mk file
accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If a2x is found, tinyproxy won't touch the configuration files and will
try to regenerate them which will result in the following build failure:
make[4]: Entering directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/build/tinyproxy-1.10.0/docs/man5'
GEN tinyproxy.conf.5
File "/accts/mlweber1/bin/a2x", line 76
print '%s: %s' % (PROG,msg)
^
SyntaxError: invalid syntax
Fixes:
- http://autobuild.buildroot.org/results/fbd81c05f37a3db6df1cbc3495a89957c6587d25
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Introspection support in gupnp is handled by way of vala tools and
vala bindings.
Even though host-vala is already a transitive dependency via gssdp,
add it to gupnp for correctness sake; also explicitly enable the
generation of the vala API, since it is required for introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building its introspection metadata description files, gssdp can
also generate the associated vala bindings.
Dependent packages may then use either or both the introspection
metadata description files or the vala bindings to generate their own.
For example; this is the case with gupnp, which requires the vala
bindings from gssdp to be able to generate its introspection metadata
description files and vala bindings.
Since there is no way to know whether the vala bindings are required or
not, we always build them. host-vala has no dependency that is not
already a dependency of gssdp, so the overhead is just the time to build
host-vala itself, roughly 32s here when compared to 10+minutes to build
all the dependencies of gssdp with introspection support.
Fixes:
- http://autobuild.buildroot.org/results/06f879902a567c26bade630091b21b56f637bd60/
- http://autobuild.buildroot.org/results/457ecc20e1932e13e82ff6bdcaf4adaf97cb7d1d/
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
make-4.3 shipped with a backward incompatible change in how sharp signs
are handled in macros. Previously, up to make 4.2, the sharp sign would
always start a comment, unless backslash-escaped, even in a macro or a
fucntion call.
Now, the sharp sign is no longer starting a comment when it appears
inside such a macro or function call. This behaviour was supposed to be
in force since 3.81, but was not; 4.3 fixed the code to match the doc.
As such, use of external toolchains is broken, as we use the sharp sign
in the copy_toolchain_sysroot macro, in shell variable expansion to
strip off any leading /: ${target\#/}.
Fix that by applying the workaround suggested in the release annoucement
[0], by using a variable to hold a sharp sign.
[0] https://lists.gnu.org/archive/html/info-gnu/2020-01/msg00004.html
Signed-off-by: Yaroslav Syrytsia <me@ys.lc>
[yann.morin.1998@free.fr:
- move the SHARP_SIGN definition out of Makefile and into support/
- expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
During package update, the legacy option was set to the existing
2020.02 release instead of the next 2020.05.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
External protobuf is used instead of embedded one since commit
31c68a449e. However it fails to build on:
[ 63%] Building CXX object modules/dnn/CMakeFiles/opencv_dnn.dir/misc/caffe/opencv-caffe.pb.cc.o
In file included from /home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.cc:4:
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.h:17:2: error: #error This file was generated by an older version of protoc which is
17 | #error This file was generated by an older version of protoc which is
| ^~~~~
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.h:18:2: error: #error incompatible with your Protocol Buffer headers. Please
18 | #error incompatible with your Protocol Buffer headers. Please
| ^~~~~
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.h:19:2: error: #error regenerate this file with a newer version of protoc.
19 | #error regenerate this file with a newer version of protoc.
| ^~~~~
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.cc:12:10: fatal error: google/protobuf/wire_format_lite_inl.h: No such file or directory
12 | #include <google/protobuf/wire_format_lite_inl.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this error by setting PROTOBUF_UPDATE_FILES to ON
Fixes:
- http://autobuild.buildroot.org/results/219258c90709fc34748929f1dcdf4f0649215e61
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Just like i.MX8MQ, i.MX8MMini is using Hantro VPU.
- Platform name wasn't set for i.MX8Mini
-> now differencing IMX8MQ and IMX8MM for VPU package
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The script used the logger utility unconditionally but it may not exist
(e.g. busybox-minimal.config is used and BR2_PACKAGE_UTIL_LINUX_LOGGER
is not selected).
Declare two functions to perform the operation, run_logger and run_std,
and use the appropriate one, depending on the existence of logger.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explain the busybox peculiarities and how the script works with both
versions of the sysctl utility.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The scripts were already the same, except for some comments, so make the
busybox S02sysctl a symlink to the procps-ng one, which works with both
versions of the "sysctl" utility.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jianhui zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- be more explicit with SSL options
- drop logic around luainterpreter since luajit is not properly
detected]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since spice ver. 0.12.6 doesn't depend on cegui anymore
let's bump to the latest stable version and rename package.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add COPYING.LGPL to license files, disable the "cloud configuration"
tool. It requires libcurl and it is too unlikely to be useful.
The library license is now LGPL-2.1+.
The hash of CONTRIBUTING has changed because it now refers to
LGPL-2.1+ instead of LGPL-2.0+.
The hash of COPYING is changed due to white-space changes, and the
removal of an introduction text:
Unless a COPYING file in a subdirectory or file-specific license
headers specify a different license, the following applies to all
files in this directory and all subdirectories.
This program is free software; you can redistribute it and/or
modify it under the terms of the GNU General Public License as
published by the Free Software Foundation; either version 2 of the
License, or (at your option) any later version.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
[Thomas:
- fix hash of CONTRIBUTING
- expand commit log
- drop GFDL license information, since documentation is not installed
on the target]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
OP-TEE provides the possibility of secure storage done by the
normal world OS via tee-supplicant.
The location is a compile-time value and by default it is /data/tee .
As this might not be suitable for all use-cases add an option to
set the CFG_TEE_FS_PARENT_PATH compile option.
Default value is still /data/tee as it was before adding this option.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 7f169e6bc3.
As pointed out by Yann E. Morin, we really want to explicitly disable
crypto backends, otherwise they will get automatically re-enabled if
one of the dependencies is found:
elseif(OPENSSL_FOUND)
set(RTTY_USE_OPENSSL ON)
elseif(WOLFSSL_FOUND)
set(RTTY_USE_WOLFSSL ON)
elseif(MBEDTLS_FOUND)
set(RTTY_USE_MBEDTLS ON)
But as usual, dependencies may incorrectly be found, so we want to
explicitly disable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 xkb_state_key_get_layout (state=state@entry=0x0, kc=kc@entry=50) at ../src/state.c:217
Program terminated with signal SIGSEGV, Segmentation fault.
#0 XkbKey (kc=kc@entry=45, keymap=0x0) at ../src/keymap.h:430
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Convert the package type to meson as there is no longer autotools support.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The libbfd library provided by binutils unfortunately changed its API
in binutils >= 2.34. This is causing some build failures at the moment
on architectures such as ARC that are using a very recent binutils
version, but it would also cause build failures on other architectures
once they start using binutils 2.34.
We fix this build issue by backporting an upstream oprofile
patch. However, this patch touches configure.ac, which means we need
to autoreconf, which needs another fix in configure.ac for autoreconf
to succeed.
With all that in place, this commit fixes:
http://autobuild.buildroot.net/results/583d281c6cd2aecb65556080b379db24101ae3a8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update license file hashes due to copyright year change.
- Remove vendor/github.com/konsorten/go-windows-terminal-sequences/LICENSE
as it no longer exists.
- Add new vendor/github.com/urfave/cli/LICENSE hash.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[yann.morin.1998@free.fr:
- bump to 5.5.13
- rebase on top of master
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
daemon/gvfsdaemon.c in gvfsd from GNOME gvfs before 1.38.3, 1.40.x
before 1.40.2, and 1.41.x before 1.41.3 opened a private D-Bus server
socket without configuring an authorization rule. A local attacker could
connect to this server socket and issue D-Bus method calls. (Note that
the server socket only accepts a single connection, so the attacker
would have to discover the server and connect to the socket before its
owner does.)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2.
daemon/gvfsbackendadmin.c mishandles a file's user and group ownership
during move (and copy with G_FILE_COPY_ALL_METADATA) operations from
admin:// to file:// URIs, because root privileges are unavailable.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2.
daemon/gvfsbackendadmin.c mishandles file ownership because setfsuid is
not used.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2.
daemon/gvfsbackendadmin.c has race conditions because the admin backend
doesn't implement query_info_on_read/write.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An incorrect permission check in the admin backend in gvfs before
version 1.39.4 was found that allows reading and modify arbitrary files
by privileged users without asking for password when no authentication
agent is running. This vulnerability can be exploited by malicious
programs running under privileges of users belonging to the wheel group
to further escalate its privileges by modifying system files without
user's knowledge. Successful exploitation requires uncommon system
configuration.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
when compiling gobject-introspection .gir files, some packages use vapigen to
generate a vala-api compatible .gir file. These packages tend to call vapigen
directly instead of vala or valac.
Without the wrapper, building the .gir files fail. In the case of for example,
gupnp-dlna throws the following error:
"error: Package `Gst-1.0' not found in specified Vala API directories or
GObject-Introspection GIR directories."
Installing the vala wrapper for vapigen fixes the above issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add double quotes around the $@ variable to prevent word splitting.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: s/globbing/word splitting/]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- update outdated website URL
- add missing Nitrogen8M configuration
- reword procedure to make it clear it works for all storages
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- To avoid code duplication and to benefit from support script
improvements like empty target dir.
- Note that currently genimage.sh can't be set in defconfig directly for
i.MX8 targets as the POST_SCRIPT_ARGS is used by
imx8-bootloader-prepare.sh
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcec added sysfs scanning support:
On Linux, dynamic device discovery is currently implemented via libudev,
which may not be available on more minimal systems. Thus, we implement a
new device discovery that directly uses sysfs to scan through available
USB devices for supported ones without any additional dependencies.
70d71cb16f
Previously Kodi needed udev to find the Pulse-Eight CEC adapter.
Run-time tested using Kodi 18.6-Leia.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove patches (already in version)
- Current license files have been moved to licenses since
e5f22ed4ae
- Add new LICENSE file, available since
6e03f5fda0
- Update indentation of hash file (two spaces)
- This bump is necessary to fix build with latest domoticz. Indeed, even
if this is a wrong practice, domoticz has a local copy of openzwave
headers which are now desynchronized from the openzwave source files
Fixes:
- http://autobuild.buildroot.org/results/193b8dd97c927805679d874dce6e27c685ce1f28
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The older version of flake8 on the autobuilders does not support typehints.
As such, flake8 throws the following error when scanning sample_gst1_python:
E999 SyntaxError: invalid syntax
Remove the typehinting from on_message to fix this issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This initial support includes:
Linux 5.4
U-Boot 2020.01
Arm Trusted Firmware v2.2
Buildroot default packages.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ATF configurations, require a pre-built bare metal toolchain to
build some platforms which host cortex-m series core, for instance
rockchip rk3399 has a cortex-m0 core. Without a pre-built bare metal
toolchain, the build fails:
make[3]: arm-none-eabi-gcc: Command not found
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_ARM32_TOOLCHAIN
option. Platforms which have such requirement should enable this
config option.
Signed-off-by: Suniel Mahesh <sunil@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix a few punctuation mistakes. The removed link is redundant, see the
previous sentence.
Signed-off-by: Merlin Büge <merlin.buege@tuhh.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libical allows remote attackers to cause a denial of service
(use-after-free) and possibly read heap memory via a crafted ics file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
An issue was discovered in Pure-FTPd 1.0.49. An uninitialized pointer
vulnerability has been detected in the diraliases linked list. When the
*lookup_alias(const char alias) or print_aliases(void) function is
called, they fail to correctly detect the end of the linked list and try
to access a non-existent list member. This is related to init_aliases in
diraliases.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2020-7105: async.c and dict.c in libhiredis.a in hiredis
through 0.14.0 allow a NULL pointer dereference because malloc return
values are unchecked.
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit a570f63dd4 (Revert "package/perl-crypt-ssleay: new package")
forgot to deregister the associated test from the gitlab-ci list.
Remove it now.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The config is missing the following packages:
- BR2_PACKAGE_GST1_PLUGINS_BASE
This is needed for the videotestsrc plugin which provides
videotestsrc.
- BR2_PACKAGE_GST1_PLUGINS_BAD
This is needed for the debugutils plugin which provides
fakevideosink.
- BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_VIDEOTESTSRC
videotestsrcplugin used by the example pipeline.
- BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_DEBUGUTILS
fakevideosink plugin used by the example pipeline.
The sample was also amended to fix:
- no call to main.
- using autovideosink instead of fakevideosink. Using Fakevideoskink
is preferred because its primary purpose is for debugging and sample
pipelines. Autovideosink does not work because there is no video
output device.
- No function on_message. Without this function, the script fails
because of the missing function.
- The script sets the pipeline to Gst.State.EOS instead of
Gst.State.NULL which results in a failed pipeline state. When the
state is set to NULL, gstreamer automatically calls EOS. Manually
setting the pipeline state to EOS results in the following error:
Trying to dispose element sink, but it is in PLAYING instead of
the NULL state. You need to explicitly set elements to the NULL
state before dropping the final reference, to allow them to
clean up. A refcounting bug may also cause this problem in the
application or some element.
In addition, the default timeout is set too low and would result in a
test failure, this has been changed to 200 seconds.
These issues are now properly fixed, and the sample script passes.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- meld the two patches together
- add the print() in the on_demand callback
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Due to the CONF_ENV options set in the gst1-python.mk file, libpython-dir
must be set manually or else the error:
"Python dynamic library path could not be determined" occurs.
Previously the libpython-dir option was set to
$(HOST_DIR)/lib/python$(PYTHON3_VERSION_MAJOR), however, this breaks the
resulting .so because the above full path is baked into the resulting .so.
which results in the error:
Couldn't g_module_open libpython. Reason:
/full/path/to/host/lib/python3.8/libpython3.8.so: cannot open shared object
file: No such file or directory
To fix this error, set the libpython-dir to /usr/lib.
Because we provide PYTHONPATH=$(PYTHON3_PATH) in the GST1_PYTHON_CONF_ENV,
the logic in the meson file uses the above python3 provided by the PYTHONPATH
variable to determine /usr/lib/ has the proper
python$(PYTHON3_VERSION_MAJOR).so file.
Because Buildroot provides the appropriate paths, the meson file finds
the correct .so file and the resulting compiled library has the appropriate
path of /usr/lib/python3.$(PYTHON3_VERSION_MAJOR).so
This change has been tested on the following distributions:
- Debian 9 and 10
- Debian 9 without python3 installed on the host.
- Centos7
- Fedora 31
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update in the copyright year of the license file:
-Copyright (c) 2001-2019
+Copyright (c) 2001-2020
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license file hash has changed, due to the following changes:
- A line "License: bsd-3-clause" is being added
- The copyright year is updated to "Copyright (c) 2013-2020, Kim
Davies. All rights reserved."
- Details about portions of the codec and unit tests code being under
the PSF license are removed.
- Details about the unit tests including Unicode License Agreement
code are removed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Disabled creation of u-boot.imx image as it fails, and is not required.
Final boot image is created from uboot binary and firmwares in post image
script board/freescale/common/imx/imx8-bootloader-prepare.sh
With the bump of the kernel to 4.19, the kernel configuration now needs
host-openssl to build.
Tested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Laurent GAUTHIER <laurent.gauthier_1@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hash for LICENSE also changed. The following text was removed:
Note: Much of the code in libite (-lite) is written by Claudio Matsuoka
for Finit and released under the MIT/X11 license. Joachim Nilsson
later improved on the Finit code base and included pieces of
software released under the ISC and BSD licenses. See each
respective file for license details.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The final solution accepted upstream differs from the local patch applied
earlier in Buildroot (commit 4ff6e52392).
Update the local code accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 25033cfb86.
This perl package is deprecated and gives following recommendations while
building:
*** THIS IS NOT AN ERROR, JUST A MESSAGE FOR YOUR INFORMATION ***
Do you really need Crypt::SSLeay?
Starting with version 6.02 of LWP, https support was unbundled into
LWP::Protocol::https. This module specifies as one of its prerequisites
IO::Socket::SSL which is automatically used by LWP::UserAgent unless
this preference is overridden separately. IO::Socket::SSL is a more
complete implementation, and, crucially, it allows hostname
verification. Crypt::SSLeay does not support this. At this point,
Crypt::SSLeay is maintained to support existing software that already
depends on it.
However, it is possible that your software does not really depend on
Crypt::SSLeay, only on the ability of LWP::UserAgent class to
communicate with sites over SSL/TLS.
If are using version LWP 6.02 or later, and therefore have installed
LWP::Protocol::https and its dependencies, and do not explicitly use
Net::SSL before loading LWP::UserAgent, or override the default socket
class, you are probably using IO::Socket::SSL and do not really need
Crypt::SSLeay.
Before installing Crypt::SSLeay, you may want to try specifying a
dependency on LWP::Protocol::https.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the kernel to 4.19, the kernel configuration needs host-openssl
to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the recent bump of the kernel to 4.19, the kernel configuration
now needs host-openssl to build.
Fixes:
scripts/extract-cert.c:21:10: fatal error: openssl/bio.h: No such file or directory
21 | #include <openssl/bio.h>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hash of the license file changed due to the following diff:
-Copyright (c) 2017-2019 Ingy döt Net
+Copyright (c) 2017-2020 Ingy döt Net
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changelog summary:
- Various fixes all over
- Updated LPDDR4 timings for i.MX8M
- Support of UUU recovery tool
- Added support for i.MX8MMini, i.MX8MNano
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It was searching for CONFIG_ASH=y and CONFIG_HUSH=y at $(@D)/.config,
which does not contain the package build path at the target-finalize
step. Use $(BUSYBOX_DIR), instead.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Always use the --disable-dbengine configuration option, because we do
not support libjudy dependency that is required otherwise.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add python unicodedata runtime dependency, fixes:
File "usr/lib/python3.8/site-packages/jinja2/lexer.py", line 46, in <module>
ModuleNotFoundError: No module named 'unicodedata'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a single module, which implements
a platform independent file lock in Python, which provides
a simple way of inter-process communication.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A simple interface to SFTP. The module offers high level
abstractions and task based routines to handle your SFTP
needs.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/test_gst1_python.py:29:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
support/testing/tests/package/sample_python_gobject.py:5:1: E302 expected 2 blank lines, found 1
support/testing/tests/package/sample_python_gobject.py:8:7: E111 indentation is not a multiple of four
support/testing/tests/package/sample_python_gobject.py:11:1: E305 expected 2 blank lines after class or function definition, found 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following flake8 warnings:
support/testing/tests/package/sample_gst1_python.py:5:1: F401 'time' imported but unused
support/testing/tests/package/sample_gst1_python.py:7:1: E402 module level import not at top of file
support/testing/tests/package/sample_gst1_python.py:21:12: W292 no newline at end of file
For the E402 warning, we add a "noqa" marker, as we really want the
gi.require_version() to be before.
There is still one remaining warning to be fixed:
support/testing/tests/package/sample_gst1_python.py:18:28: F821 undefined name 'on_message'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flake8 complains with:
support/scripts/pkg-stats:339:13: E722 do not use bare 'except'
Due to the construct:
try:
something
except:
print("some message")
raise
Which is in fact OK because the exception is re-raised. This issue is
discussed at https://github.com/PyCQA/pycodestyle/issues/703, and the
general agreement is that these "bare except" are OK, and should be
ignored from flake8 using a noqa statement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
flake8 complains with:
pkg-stats:38:1: E402 module level import not at top of file
This is due to sys.path.append() being before the import from
getdeveloperlib, but we really need this sys.path.append() to be
before, so let's ignore this flake8 warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upstream only ever made a dot-relase once, and it is not even available
as a tag, and it is not even listed as a separate release on their
github release page. We can assume that dot-release is not in upstream
habits. Drop the VERSION_MAJOR variable, just use VERSION.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[yann.morin.1998@free.fr:
- drop VERSION_MAJOR
- two spaces in hash file
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
patch 0001: already applied upstream
patch 0002: already applied upstream
Adjust license hash as the copyright year was changed
Signed-off-by: Michael Fischer <mf@go-sys.de>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libostree build fails when introspection is enabled:
./.libs/libostree-1.so: error adding symbols: File in wrong format
collect2: error: ld returned 1 exit status
src/libostree/ostree-repo-deprecated.h:28: Warning: OSTree: symbol='G_GNUC_DEPRECATED_FOR': Skipping foreign symbol from namespace Gio
linking of temporary binary failed: Command '['/bin/bash', './libtool', '--mode=link', '--tag=CC', '--silent', 'gcc', [...] ]' returned non-zero exit status 1.
This is because the build system for libostree hard-codes CC=gcc when
calling the GOI scanner, which obviously causes build failures when in
cross-compilation.
In d264351cfc (package/libostree: disable introspection), we just
papered over the problem by forcibly disabling introspection altogether.
Turns out the fix is realatively simple: we can just override the
INTROSPECTION_SCANNER_ENV variable when calling make, which will revert
to the behaviour we expect: to use the cross-compiler in the GOI scanner
wrapper.
Thanks to Adam for pointing out at INTROSPECTION_SCANNER_ENV in the
first place. :-)
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With autoconf packages, we often specify ac_cv_func_... cached values to
avoid runtime checks during configure. With meson the equivalent is
setting properties in cross-compilation.conf which we cannot do in
Buildroot at the moment.
For example, libglib2 used to set ac_cv_func_printf_unix98 and
ac_cv_func_vsnprintf_c99 so that the system printf could be used, but
with the conversion to meson these checks fail and the gnulib fallback
is used.
Add infrastructure in the same way as FOO_MESON_EXTRA_BINARIES to allow
per-package modification to the cross-compilation properties.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr: do a single substitution as in a1e3c7b693]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add patch to enable meson static library build (use meson
library() instead of shared_library()).
Fixes:
- http://autobuild.buildroot.net/results/b920ef5a250e7d23223352367ded50bf32bb5688
.../host/bin/arm-linux-gcc -o libevdev.so.2.3.0 'evdev@sha/libevdev_libevdev-uinput.c.o' 'evdev@sha/libevdev_libevdev.c.o' 'evdev@sha/libevdev_libevdev-names.c.o' -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -shared -fPIC -Wl,--start-group -Wl,-soname,libevdev.so.2 -Wl,--end-group -Wl,-elf2flt -static -Wl,--version-script,.../build/libevdev-1.9.0/libevdev/libevdev.sym
ld (ld-elf2flt): -shared used without passing a shared library ID
- http://autobuild.buildroot.net/results/dc52a705c7490b722380af7b00ff7c6e172450cf
.../host/bin/x86_64-linux-gcc -o libevdev.so.2.3.0 'evdev@sha/libevdev_libevdev-uinput.c.o' 'evdev@sha/libevdev_libevdev.c.o' 'evdev@sha/libevdev_libevdev-names.c.o' -Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -shared -fPIC -Wl,--start-group -Wl,-soname,libevdev.so.2 -Wl,--end-group -static -Wl,--version-script,.../build/libevdev-1.9.0/libevdev/libevdev.sym
.../host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: .../host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/crtbeginT.o: relocation R_X86_64_32 against hidden symbol `__TMC_END__' can not be used when making a shared object
.../host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: .../host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/crtend.o: relocation R_X86_64_32 against `.ctors' can not be used when making a shared object; recompile with -fPIC
.../host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: final link failed: nonrepresentable section on output
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The aarch64 compile uses the sys/auxv.h header which is not
provided by ulcibc-ng. Add configure.ac patch to check for
the header before using it in ext/standard/crc32.c.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12626
build/php-7.4.3/ext/standard/crc32.c:26:12: schwerwiegender Fehler: sys/auxv.h: Datei oder Verzeichnis nicht gefunden
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The newly introduced option does not follow the naming scheme of other
Realtek firmwares, in part because the model is not named rtl-something,
but rtw-something.
Rename the option to match the VENDOR_DEVICE scheme. We do not add a
legacy entry for this: we've had no release and it was pushed minutes
ago...
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes:
http://autobuild.buildroot.net/results/1881daae69992e30a9c1fff1f639d57f82e6ee19
../src/gallium/drivers/vc4/vc4_bufmgr.c:110:57: error: format '%ld' expects argument of type 'long int', but argument 3 has type 'time_t' {aka 'long long int'} [-Werror=format=]
../src/gallium/drivers/panfrost/pan_bo.h:93:9: error: unknown type name ‘time_t’
../src/gallium/drivers/v3d/v3d_bufmgr.c:83:57: error: format ‘%ld’ expects argument of type ‘long int’, but argument 3 has type ‘time_t’ {aka ‘long long int’} [-Werror=format=]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove first patch (not needed anymore)
- Update second patch
- Remove third to fifth patches (already in version)
- Add a mandatory jsoncpp dependency instead of using builtin jsoncpp:
301fcfbd80
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new rcw.py script is python3-only, but we can use either the
system-provided python3, or the one we build with host-python3 if
the system does not have it already.
It turns out, also, that rcw.py is using #!/usr/bin/env python3,
so it will easily find it from $PATH, so we export it in the
environment.
Signed-off-by: Laurent Hartanerot <laurent.hartanerot@atos.net>
[yann.morin.1998@free.fr:
- set the proper PATH in the envioronment
- do not explicitly call python3, defer to /usr/bin/env in the script
- add an accompagnying comment
- rewrite commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jianhui Zhao <zhaojh329@gmail.com>
[Thomas:
- add entry in DEVELOPERS file
- add -DRTTY_SSL_SUPPORT=OFF to explicitly disable SSL support
- fix license file name in the hash file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
$(TARGET_DIR)/usr/share/collectd/postgresql_default.conf
should not be removed when postgresql support is enabled,
as that module tries to load that file by default.
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
before it was completely non-obvious how to get crypto support
in collectd's network module
this introduces a collectd config option which makes sure
gcrypt is built, and can't be accidentally unselected
resulting in an accidental non-crypto build of collectd
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The v3d driver for arm uses neon instructions unconditionally, so
depend on BR2_ARM_CPU_HAS_NEON.
Fixes:
http://autobuild.buildroot.net/results/66c4df4ee84b73160dde5fe4437b5abdbd2b50d2
[1050/1079] Compiling C object 'src/gallium/drivers/v3d/99241e4@@v3d_neon@sta/v3d_tiling.c.o'.
{standard input}: Assembler messages:
{standard input}:417: Error: selected processor does not support `vldm r6,{q0,q1,q2,q3}' in ARM mode
{standard input}:418: Error: selected processor does not support `vst1.8 d0,[r4],r5' in ARM mode
{standard input}:419: Error: selected processor does not support `vst1.8 d1,[r4],r5' in ARM mode
{standard input}:420: Error: selected processor does not support `vst1.8 d2,[r4],r5' in ARM mode
{standard input}:421: Error: selected processor does not support `vst1.8 d3,[r4],r5' in ARM mode
{standard input}:422: Error: selected processor does not support `vst1.8 d4,[r4],r5' in ARM mode
{standard input}:423: Error: selected processor does not support `vst1.8 d5,[r4],r5' in ARM mode
{standard input}:424: Error: selected processor does not support `vst1.8 d6,[r4],r5' in ARM mode
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add mesa3d patch to add a vc4 option to disable
the optional neon support and set it dependent
on BR2_ARM_CPU_HAS_NEON.
Fixes:
http://autobuild.buildroot.net/results/6387b0a99e1a0922811919623d9a10b0943988df
[1086/1254] Compiling C object 'src/gallium/drivers/vc4/691f666@@vc4_neon@sta/vc4_tiling_lt_neon.c.o'.
{standard input}: Assembler messages:
{standard input}:334: Error: selected processor does not support `vldm r4,{q0,q1,q2,q3}' in ARM mode
{standard input}:335: Error: selected processor does not support `vst1.8 d0,[r3],r2' in ARM mode
{standard input}:336: Error: selected processor does not support `vst1.8 d1,[r3],r2' in ARM mode
{standard input}:337: Error: selected processor does not support `vst1.8 d2,[r3],r2' in ARM mode
{standard input}:338: Error: selected processor does not support `vst1.8 d3,[r3],r2' in ARM mode
{standard input}:339: Error: selected processor does not support `vst1.8 d4,[r3],r2' in ARM mode
{standard input}:340: Error: selected processor does not support `vst1.8 d5,[r3],r2' in ARM mode
{standard input}:341: Error: selected processor does not support `vst1.8 d6,[r3],r2' in ARM mode
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we build a complete AArch64 system, including a kernel. This
can take quite some time.
Switch to an armv7 system, which allows us to use one a prebuilt kernel,
thus significantly reducing the test time.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- use a standalone config; don't inherit from TestPythonPackageBase
- use the default external toolchain (ARM, not Linaro)
- rewrite commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This test case runs a simple pipeline for 100 frames to ensure that
gst1-python works properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GStreamer Python binding overrides.
This package also includes a simple upstream patch that fixes building against
python-3.8.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix libpython-dir as noticed by Adam
- rewrap a comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set -Dintrospection=enabled in
the configure options and add a dependency for gobject-introspection.
This feature requires an upstream patch that allows introspection support even
when cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set -Dintrospection=enabled in
the configure options and add a dependency for gobject-introspection.
This feature requires an upstream patch that allows introspection support even
when cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set -Dintrospection=enabled in
the configure options and add a dependency for gobject-introspection.
This feature requires an upstream patch that allows introspection support even
when cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set -Dintrospection=enabled in
the configure options and add a dependency for gobject-introspection.
This feature requires an upstream patch that allows introspection support even
when cross-compiling.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set --enable-introspection in
the configure options and add a dependency for gobject-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set --enable-introspection in
the configure options and add a dependency for gobject-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set -Dintrospection=true in
the configure options and add a dependency for gobject-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If gobject-introspection is selected, explicitly set --with-introspection in
the configure options and add a dependency for gobject-introspection.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patch (already in version)
- Drop -fPIC (not needed since
9518b50247)
- Update hash of license file (update in year and LuaXML):
e14dff167a6d87359d6c
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When a package installs a kernel module, it is currently not possible to
have it loaded with modprobe or when the kernel requests an alias for
it, as the module is not listed in /lib/modules/<kernel-version>/modules.dep
and the associated files.
So, we need to run depmod after all packages are installed, to register
any such out-of-tree module.
This means we should be able to let go of calling depmod at the time the
kernel is installed, but if we pass an invalid command, the kernel
whines:
DEPMOD 5.4.27
./scripts/depmod.sh: 46: /dev/null: Permission denied
make[2]: *** [Makefile:1326: _modinst_post] Error 126
This is because the kernel does not directly call to depmod, but uses a
wrapper that is not happy if depmod is not depmod.
Since the call to depmod does not cost much, we just keep it.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr:
- keep calling depmod when installing kernel
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit f85c4a4170 updated package
version but did not updated hashes for EULA and COPYING license files.
The patch fixes "make legal-info" for imx-sc-firmware package.
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 8cc27a292e updated package
version but did not updated hashes for EULA and COPYING license files.
The patch fixes "make legal-info" for firmware-imx package. Also
adopt new spacing convention in .hash files (two spaces).
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The package only ever builds the client; it builds neither the server
nor the manager.
Drop the comment altogether.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: drop the comment altogether]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bluez5' support for the mesh profile needs ell, the Embedded Linux
Library, at least version 0.28.
Although Bluez5 bundles an internal copy of ell version 0.28, we prefer
building with external libraries.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since version 0.24:
0.28:
Fix issue with NULL check of D-Bus proxy for method calls.
Add support for emitting D-Bus property changes on demand.
Add support for reporting file attribute changes.
0.27:
Fix issue with data overflow and multiple PEMs.
Fix issue with handling DHCP lease expiration.
0.26:
Fix issue with memory leak and TLS certificates.
Fix issue with buffer size and TLS PRF handling.
Add support for D-Bus non-root ObjectManager.
0.25:
Fix issue with stopping DHCP client and owner notification.
Fix issue with time calculation overflow and DHCP.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since version 5.52:
5.54:
Fix issue with HOGP to accept data only from bonded devices.
Fix issue with A2DP sessions being connected at the same time.
Fix issue with class UUID matches before connecting profile.
Add support for handling MTU auto-tuning option for AVDTP.
Add support for new policy for Just-Works repairing.
Add support for Enhanced ATT bearer (EATT).
5.53:
Fix issue with handling unregistration for advertisment.
Fix issue with A2DP and handling recovering process.
Fix issue with udpating input device information.
Add support for loading blocked keys.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit updates all our toolchain configuration fragments for
pre-built Buildroot toolchains to use toolchains built with Buildroot
2020.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This package needed to be updated to be aligned with NXP BSP
4.19.35_1.1.0
The package patches have also been rebased on top of rel_imx_4.19.35_1.1.0
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package needed to be updated to be aligned with NXP
BSP 4.19.35_1.1.0
This newer 8.5 version no longer include ahab-container images.
Those images are now in a separate imx-seco package.
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is needed with Freescale i.MX8/i.MX8X defconfigs
version equal to 4.19.35_1.0.0
It is also subject to multi-version support.
The package version aligned with NXP BSP 4.19.35_1.1.0 is 2.3.1
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The C program inside check-kernel-headers.sh has two checking mode: a
strict and a loose one.
In strict mode, we want the kernel headers version declared by the
user to match exactly the one of the toolchain.
In loose mode, we want the kernel headers version of the toolchain to
be greater than or equal to the one declared by the user: this is used
when we have a toolchain that has newer headers than the latest
version known by Buildroot.
However, in loose mode, we continue to show the "Incorrect kernel
headers version" message, even though we then return a zero error
code. This is very confusing: you see an error displayed on the
terminal, but the build goes on.
We fix that by first doing the loose check first, and returning 0 if
it succeeds. And then we move on with the strict check where we want
the version to be identical.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The external toolchain configure step calls the
check_kernel_headers_version make function to compare the kernel
headers version declared in the configuration with the actual kernel
headers of the toolchain.
This function takes 4 arguments, but due to a missing comma what
should be the first two arguments are both passed into the first
argument. Due to this, when check_kernel_headers_version does:
if ! support/scripts/check-kernel-headers.sh $(1) $(2) $(3) \
$(if $(BR2_TOOLCHAIN_HEADERS_LATEST),$(4),strict); \
Then:
$(1) contains "$(BUILD_DIR) $$(call toolchain_find_sysroot,$$(TOOLCHAIN_EXTERNAL_CC))"
$(2) contains "$$(call qstrip,$$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))"
$(3) contains "$$(if $$(BR2_TOOLCHAIN_EXTERNAL_CUSTOM),loose,strict))"
So from the point of view of check-kernel-headers.sh, it already has
four arguments, and therefore the additional argument passed by:
$(if $(BR2_TOOLCHAIN_HEADERS_LATEST),$(4),strict); \
is ignored, defeating the $(BR2_TOOLCHAIN_HEADERS_LATEST) test.
The practical consequence is that a toolchain that has 5.4 kernel
headers but declared as using 5.3 kernel headers does not abort the
build, because the check is considered "loose" while it should be
"strict".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Let's clean up "boards/stmicroelectronics" directory a bit
to have everything in particular directories.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The board support package includes the following components:
- U-Boot 2020.01
- Linux 5.4.26
- Buildroot default packages
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original python-cheetah project was abandoned and a new
fork was created as a drop-in replacement. Though the name of the
fork is Cheetah3, we do not rename the package name to avoid
dependency renaming.
The new fork supports both Python2 and Python3.
python-markdown is now an optional dependency.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent perl-crypt-ssleay, perl-lwp-protocol-https, and
perl-html-parser packages aditions came with associated new
runtime tests, which is good, but forgot to regenerate the
gitlab-ci.yml file with the updated list of tests.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
since version 2020.02, moarvm depends on libtommath 1.2.0
the patch is useless since the bump of the embedded dyncall:
4b85baf44b
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Post-build scripts may want to do something based on the list of files
installed by a package. However, since commit
0e2be4db8a the final packages-file-lists.txt
file is only created _after_ the post-build scripts.
Move the assembly of the file lists upwards, before the post-build scripts.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If a package sets a FOO_SUBDIR (meaning its sources are not under
output/build/foo-123 but under output/build/foo-123/$(FOO_SUBDIR)), the
.files-list.txt file were also created under FOO_SUBDIR, due to which the
logic in the Makefile would not find it.
Change the instrumentation steps so that the file list is directly under the
package dir, ignoring the subdir.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In very limited configurations, it is possible to have a case where no
.files-list-staging.txt files are created. In this case:
cat $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt)) > \
$(BUILD_DIR)/packages-file-list-staging.txt
becomes:
cat > \
$(BUILD_DIR)/packages-file-list-staging.txt
which of course makes the build hang.. forever.
So we fix this by checking the list is not empty. To keep the code
readable, we introduce an intermediate variable to store the list of
these files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: always create the file, even if empty]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Radvd has its own main(), and does not use yywrap() from libfl.so,
because scanner.l module contains noyywrap option. So, none of the
functions exported by libfl.so are used, and there's no need to have
the flex runtime on target.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When barebox, and thus barebox-aux, are downloaded from a git tree, then
barebox-aux download fails because a hash check is attempted on the
downloaded archive:
Could not fetch special ref 'v2020.03.0'; assuming it is not special.
ERROR: No hash found for barebox-aux-v2020.03.0.tar.gz
This is because we only exclude from the check the archive of the bare
barebox:
BR_NO_CHECK_HASH_FOR += $(BAREBOX_SOURCE)
However, the default name of an archive is based on the package name,
which for barebox-aux is not 'barebox'.
Since barebox-aux really uses the exact same source as the bare barebox,
it should also share the archive name.
This has two direct consequences and advantages:
- the hash check is completely avoided for the barebox-aux archive;
- the barebox-aux archive is not downloaded as it is already
downloaded for barebox.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream ships distribution tarballs with pre-built manpages and
necessary fixes, so that the build doesn't break if asciidoc is not
available.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch makes possible to create rootfs image using
EROFS filesystem.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- simplify help text of filesystem entry
- drop the compression choice, keep the single boolean
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
perf auto-detects and uses the libbfd (from binutils) and openssl
libraries if they are detected and happen to be built before perf is,
but if they're not, or if per-package directories are enabled, it won't
detect these libraries. Explicitly add dependencies on these packages if
they are enabled, and disable the feature if not, so that the behavior
is deterministic.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch adds EROFS userspace tool erofs-utils to buildroot,
which can be used to generate EROFS images.
Signed-off-by: Gao Xiang <hsiangkao@aol.com>
[yann.morin.1998@free.fr:
- add explicit --enable-lz4
- explain why autoreconf
- add DEVELOPPER entry
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update from version 8.1.1929 to 8.2.0, which is the latest stable
version. The license file ('README.txt') has only one modification,
concerning Vim's version, as it is shown by the following diff:
--- vim-8.1.1929/README.txt 2019-08-25 23:08:17.000000000 +0200
+++ vim-8.2.0000/README.txt 2019-12-12 14:18:35.000000000 +0100
@@ -1,4 +1,4 @@
-README.txt for version 8.1 of Vim: Vi IMproved.
+README.txt for version 8.2 of Vim: Vi IMproved.
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LLVM builds bindings for other languages such as Go and OCaml when the
appropriate dependencies can be found. We currently don't support
building these bindings in Buildroot, as they're currently unused by any
package.
Building these bindings was originally disabled by overriding the
dependencies with values indicating that they were not found.
Newer versions of LLVM no longer disable the OCaml bindings when overriding
OCAMLFIND. Consequently, the build process attempts to install the bindings
to the default location on the host of /usr/lib/ocaml/llvm, causing a
permissions error and build failure.
Additionally, LLVM has since added the variable LLVM_ENABLE_BINDINGS to
control whether bindings are enabled, so we override that to disable the
bindings.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The initramfs is not a reall filesystem, so it does not use the
$(rootfs) infrastructure.
As a consequence, the usual rootfs-related variables are not set,
especially the name, type, and dependencies of the (non-)filesystem.
Yet, it is present in the list of rootfs to build, and thus we end
up including it in the output of show-info. But the missing variables
yield an incorrect json:
"": {
"type": "",
"virtual": false,
"version": "",
"licenses": "",
"dl_dir": "",
"install_target": ,
"install_staging": ,
"install_images": ,
"downloads": [ ],
"dependencies": [ ],
"reverse_dependencies": [ ]
},
First, the object key is empty; second, the install_target,
install_staging, and install_images values are empty, which is not
valid (if they were null, that be OK though). Third, this is clearly
the layout of a 'package' entry, not that of a 'rootfs' entry.
An option to fix that would be to actually make use of the rootfs
infra. However, that would mean doing a lot of work for nothing
(there is actually nothing to do, yet the infra would still do a lot
of preparatory and clean up work).
The alternative is pretty simple: declare and set the variables as if
it were a real filesystem, so that show-info can filter it to the
proper layout and can spit out appropriate content (even if fake).
The third option would be to teach show-info (and its internal
implementation, the macro json-info) to ignore specific cases, like
no-name items, or replace empty values with null, or whatnots. This
again would be quite a lot of work for a single occurence.
So we go for the simple faked variables.
We add linux as a dependency, so that the graph-depends also properly
represent the dependency chain, which ends up with something liKe:
ALL
|
v
rootfs-initramfs
| |
v v
linux rootfs-cpio
which is pretty fitting in the end.
Reported-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some ATF configurations, such as the ones for the STM32MP1 processor
family, require DTC during the build as Device Tree files are
used. Without dtc, the build fails:
/bin/sh: 1: dtc: not found
dtc version too old (), you need at least version 1.4.4
plat/st/stm32mp1/platform.mk:239: recipe for target 'check_dtc_version' failed
make[1]: *** [check_dtc_version] Error 1
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC option, in a way that mimics
the BR2_TARGET_UBOOT_NEEDS_DTC option we already have for the U-Boot
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
localedef needs bison to satisfy a .y.c rule to generate a parser for
plural forms, to ultimately generate data for the target. So we do not
want to depend on the host-provided bison; we want to build our own (for
reproducibility).
localedef is a host-only package, and dependencies are not inherited
from the target variant, so we need to make them explicit host
dependencies.
And move the assignment after all the download-related variables.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The update to version 8.32 removes the need for an extra patch [1]
(which was added in upstream) but requires another one [2] to fix a new
build issue related to the file 'src/ls.c'.
[1]: 0001-strtod_fix_clash_with_strtold.patch
[2]: 0001-ls-restore-8.31-behavior-on-removed-directories.patch
The changes in the 'COPYING' license file are purely cosmetic: the
https protocol is replacing http in all the links pointing to the
fsf.org and the gnu.org websites (plus a page being renamed). The
following diff shows one of these changes, they are all similar anyway:
- Copyright (C) 2007 Free Software Foundation, Inc. <http://fsf.org/>
+ Copyright (C) 2007 Free Software Foundation, Inc. <https://fsf.org/>
Signed-off-by: Joao Marcos Costa <joaomarcos.costa@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
With BR2_PER_PACKAGE_DIRECTORIES=y, we have the following code in the
main Makefile:
target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
@$(call MESSAGE,"Finalizing target directory")
$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
The per-package-rsync call creates the global $(TARGET_DIR) from the
per-package $(TARGET_DIR). Then, we call the TARGET_FINALIZE_HOOKS.
One of the TARGET_FINALIZE_HOOKS, PURGE_LOCALES, remove locales that
are not desired by the user. It does so using a loop with the
$(wildcard ...) function.
However, the $(wildcard ...) function is expanded at the moment the
rule is evaluated. And with per-package directory, at the time the
rule is evaluated, the global $(TARGET_DIR) is empty, so $(wildcard
...) will return nothing. It is indeed only after the call to
per-package-rsync that the TARGET_DIR will be populated.
This commit fixes that by moving away from $(wildcard ...) and use a
shell test instead, since we are anyway in big block of shell code.
With this, locales are properly purged again when
BR2_PER_PACKAGE_DIRECTORIES=y.
Fixes: c4e6d5c8be ("core: implement per-package SDK and target")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- make the style look like the code around (no space in front of ;)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If syslog-ng is selected in Buildroot and net-snmp is not, but net-snmp is
found on the host machine (at least its net-snmp-config script) then
compilation of syslog-ng fails with:
CC modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-grammar.lo
CC modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest.lo
CC modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-plugin.lo
arm-none-linux-gnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include'
make[3]: *** [Makefile:17397: modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-grammar.lo] Error 1
make[3]: *** Waiting for unfinished jobs....
arm-none-linux-gnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include'
make[3]: *** [Makefile:17404: modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest.lo] Error 1
arm-none-linux-gnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include'
make[3]: *** [Makefile:17411: modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-plugin.lo] Error 1
make[2]: *** [Makefile:21428: all-recursive] Error 1
make[1]: *** [Makefile:8740: all] Error 2
make[1]: Leaving directory '.../buildroot/output/build/syslog-ng-3.25.1'
make: *** [package/pkg-generic.mk:269: .../buildroot/output/build/syslog-ng-3.25.1/.stamp_built] Error 2
The path /usr/include is obtained via /usr/bin/net-snmp-config.
The fix comprises two parts:
1. only enable net-snmp support in syslog-ng if the net-snmp package is
enabled in Buildroot
2. for the case where net-snmp is selected in Buildroot, fix the configure
script of syslog-ng to allow parsing --with-netsnmp=<path> correctly.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In commit 0e2be4db8a
("package/pkg-generic: make file list logic parallel build
compatible"), the logic to create the list of files installed by a
particular package was significantly reworked to be compatible with
top-level parallel build.
Before this commit, there was only a after-install step of listing the
files in HOST_DIR/TARGET_DIR/STAGING_DIR. But after this commit, we
now have a before-install logic and an after-install logic.
It turns out that when the before-install logic is called for the very
first host package, $(HOST_DIR) doesn't exist yet, and therefore the
cd $(2) fails, with an error message:
/bin/sh: line 0: cd: /home/thomas/buildroot/output/host: No such file or directory
In fact, $(HOST_DIR), $(STAGING_DIR), $(TARGET_DIR) and
$(BINARIES_DIR) are created by the make rules for host installation,
staging installation, target installation and images installation, but
*after* calling the step_start hooks.
So, we simply fix this problem by creating the directories *before*
calling the step_start hooks.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add upstream patch to fix double-conversion compile for xtensa
and drop dependency on !BR_xtensa.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use "--exec-prefix=/" to install syslogd and klogd at /sbin, as required
by the init scripts. This also ensures that the BusyBox counterparts are
not installed.
Update the systemd unit files, accordingly.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Without linux-pam built first, polkit will throw a configuration error:
configure: error: Could not find pam/pam-devel, please install the needed packages.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This file was created by utils/scancpan while adding other packages but
apparently not yet added in the repo.
Assign this test case to Bernd in the DEVELOPERS file since he is
listed as the maintainer for this package.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dependency for perl-crypt-ssleay (added in a subsequent commit)
Added via utils/scancpan, without changes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a dependency for perl-lwp-protocol-https (added in a subsequent
patch).
Added via utils/scancpan, updating license only.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Note: even though the Chart.js developers make specific tarballs on GitHub
(i.e. not simply 'source code' tarballs), they cannot be used in Buildroot
because their names do not encode a version number, e.g. 'Chart.js.zip'.
This means that on upgrades, the same tarball name would have different
contents and thus a different hash.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, adding README.pod as license file and updating
license to Artistic-2.0.
Note that the license declared in META.{json,yml} ('perl') would mean either
Artistic or GPL-1.0, while the README.pod file only talks about
Artistic-2.0. Assume the author means the latter one.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added via utils/scancpan, but removing the 'suspicious' dependency on
'host-perl-mojolicious'.
During configuration, the package warns:
Checking prerequisites...
requires:
! Mojo::Base is not installed
build_requires:
! Mojolicious::Lite is not installed
! Test::Mojo is not installed
ERRORS/WARNINGS FOUND IN PREREQUISITES. You may wish to install the versions
of the modules indicated above before proceeding with this installation
Run 'Build installdeps' to install missing prerequisites.
But the build and installation continues correctly nonetheless.
Signed-off-by: Joeri Barbarien <joeri.barbarien@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, vapi support does not work with meson due to meson calling vapigen
directly instead of the vala wrapper. As such, when building typelib files for
gobject-introspection, vapigen fails to find the proper .gir files and fails
to build.
Explicitly disable vapi until a fix for vapi is made.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, meson hard codes the paths of these binaries which results in
cross-compiled environments to run the host versions of these tools.
However, GObject-introspection provides the appropriate paths to these
utilities via pkg-config
find_program is needed in the case g-i is built as a subproject. If
g-ir-scanner or g-ir-compiler are in the build or source directory use those.
If they aren't found in the source directory, use the results from pkg-config.
Backport two upstream commits to fix the issue.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building .gir .typelib files, the g-ir-scanner wrapper calls the host
g-ir-scanner. g-ir-scanner calls ccompiler.py, which searches for the following
environment variables:
CPP, CC, CXX, CPPFLAGS, CFLAGS, CXXFLAGS, LDFLAGS
These environment variables are empty by default, and as such ccompiler.py
defaults to either using the system tools (CC, CXX, and CPP) or leaving
the variables blank (LDFLAGS, CFLAGS, and CPPFLAGS.)
For autotools packages, this issue does not occur because autotools uses
Makefile.introspection found on the staging directory in
usr/share/gobject-introspection-1.0/ which automatically exports the above
variables.
However, for meson, the above variables are not exported when meson calls
g-ir-scanner to build .gir and .typelib files, which results in linking errors.
Exporting these variables in the g-ir-scanner wrapper fixes these issues and
ensures all build systems can generate .gir and .typelib files properly.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When building, gobject-introspection uses tools/g-ir-scanner to build
several .gir and .typelib files. To that goal, it internally builds and
runs a few small executables linked to libglib2. However, it does not
pass them any LDFLAGS that we could pass the buildsystem. So, it either
ends up trying to link with the system's libglib2, which may not be
instaleld (build breaks), or is installed to an other version (build may
break); in either cases, this is not good...
g-ir-scanner can use the argument --lib-dirs-envvar to pass a list of
library directories to search for. However, during the build process,
this is not possible due to the build process calling g-ir-scanner
directly without letting the user (us) pass any option.
When discussing with upstream, they explained that the only solution in
that case was to set and export LD_LIBRARY_PATH to point to the location
where the correct libglib2 was installed.
Ergo, that's what we do.
This fix has the added benefit of allowing the host gobject-introspection
to build the host .gir, .rnc, and .typelib files, which some packages
may require.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Build will fail if gobject-introspection is built before gupnp-dlna:
GISCAN GUPnPDLNAGst-2.0.gir
Couldn't find include 'Gst-1.0.gir' (search path: '['/home/buildroot/autobuild/run/instance-1/output-1/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '.', '/home/buildroot/autobuild/run/instance-1/output-1/host/share', 'gir-1.0', '/home/buildroot/autobuild/run/instance-1/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')
Fixes:
- http://autobuild.buildroot.org/results/829a84b37db7d9141785bfe2eec2dd0e6d3310f1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Change license file to debian/copyright, since src/Main.cpp changed
between 2.1.0 and 2.2.1.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build will fail if gobject-introspection is built before libgtk3:
GISCAN Gdk-3.0.gir
Couldn't find include 'GdkPixbuf-2.0.gir' (search path: '['/home/fabrice/buildroot/output/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/home/fabrice/buildroot/output/host/share', '/usr/share/gnome/gir-1.0', '/usr/local/share/gir-1.0', '/usr/share/gir-1.0', '/home/fabrice/buildroot/output/host/share/gir-1.0', '/usr/share/gir-1.0']')
make[5]: *** [/home/fabrice/buildroot/output/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/lib/../share/gobject-introspection-1.0/Makefile.introspection:156: Gdk-3.0.gir] Error 1
So disable introspection on host and target variant
Fixes:
- No autobuilder failures yet
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Build will fail if host-gobject-introspection is built before
host-gdk-pixbuf:
Writing a loaders.cache file to use when running examples before installing gdk-pixbuf.
Couldn't find include 'GModule-2.0.gir' (search path: '['/home/fabrice/buildroot/output/host/share', '/usr/share/gnome/gir-1.0', '/usr/local/share/gir-1.0', '/usr/share/gir-1.0', '/home/fabrice/buildroot/output/host/share/gir-1.0', '/usr/share/gir-1.0']')
So disable introspection on target and host variant
Fixes:
- No autobuilder failures yet
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Enabling SELinux support in the kernel requires several options, many
of which are in different areas. These options are as follows:
- CONFIG_AUDIT
- CONFIG_DEFAULT_SECURITY_SELINUX
- CONFIG_INET
- CONFIG_NET
- CONFIG_SECURITY
- CONFIG_SECURITY_NETWORK
- CONFIG_SECURITY_SELINUX
As such, if a user selects the libselinux package, it is much easier
to select these options for them, much like we already do with other
packages such as systemd or iptables.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the same name as for the SysVinit scripts. This name is also used in
debian.
linuxptp-system-clock.service -> phc2sys.service
linuxptp.service -> ptp4l.service
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The "package/busybox/S01sysklogd" is taken as template to change the
init script of the linuxptp daemon. The init script is split two parts
because there are 2 daemons (ptp4l and phc2sys).
Let the user supply its own options in /etc/default/ptp4l and
/etc/default/phc2sys.
This patch also fixes an issue with the creation of the pid file that is
needed to properly stop the daemon again.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It is required that all patches in packages have the Signed-off-by of
the contributor who brought them into Buildroot.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building a toolchain with upstream gcc 9.x the build
fail due to several issues.
Note: The upstream Binutils support csky target since
release 2.32 but the support was never enabled in the
Buildroot packaging. So the latest version (2.33.1) was
tested here.
[upstream gcc 9.x w/ glibc csky fork with binutils csky for or binutils 2.33.1]
In file included from <command-line>:
./../include/libc-symbols.h:534:26: error: '__EI___errno_location' specifies less restrictive attributes than its target '__errno_location': 'const', 'nothrow' [-Werror=missing-attributes]
534 | extern __typeof (name) __EI_##name \
[upstream gcc 9.x w/ glibc 2.30 w/ binutils csky fork]
/tmp/ccThLRhb.s: Assembler messages:
/tmp/ccThLRhb.s:10: Error: invalid or unsupported encoding in .cfi_personality
/tmp/ccThLRhb.s:11: Error: invalid or unsupported encoding in .cfi_lsda
[upstream gcc 9.x w/ glibc 2.30 w/ binutils 2.33.1]
build/elf/librtld.os: in function `__sync_fetch_and_add_2':
libgcc/config/csky/linux-atomic.c:116: undefined reference to `__kernel_cmpxchg'
Currenlty, only the toolchain using binutils, gcc, glibc
fork produce a working toolchain. So disable gcc 9.x for
csky.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Guo Ren <guoren@kernel.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Update site to get latest release
- License is GPL-3.0+ since version 4.3.0 and
2bc924c184
- Switch to cmake-infrastructure
- Remove most of the existing dependencies (alsa, speex, libupnp, ...)
as they are now only managed in mediatreamer
- Add external dependencies: belr, belle-sip, libxml2, mediastreamer,
sqlite
- This bump is needed as current linphone does not build with latest
libeXosip2
Fixes:
- http://autobuild.buildroot.org/results/ed8bdcbfb7d453ed7d436bada35417ee305e6ac9
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Retrieve official tarball and so remove autoreconf
- xlib_Xcursor is a mandatory dependency since
6dd85edc6f
- libtasn1 is a mandatory dependency since
673b267e66
- nettle is a mandatory dependency since
00d9e0c4c8
- gnutls is a mandatory dependency instead of openssl since
166d1bc14d
- pulseaudio is an optional dependency since
9b98c3b229
- iconv is mandatory since
2ea3f69873
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The new version comes with some new features and minor fixes. The two
previously included patches were merged upstream. A new patch was added
to fix build on 32-bit systems. There's a new dependency to the pcap
library.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Other changes:
- Convert the package to a meson package.
- Remove 0001-add-PYTHON_INCLUDES-override.patch as it no longer applies.
- Add gobject-introspection as a dependency.
- Add the package under myself in the DEVELOPERS file.
Because gobject-introspection is now a dependency of python-gobject, the test
must be updated at the same time.
- Change TestPythonPy2Gobject to TestPythonPy3Gobject as
gobject-introspection requires python3.
- Refactor test_python_gobject.py to no longer inherit the
TestPythonPackageBase class, as this class uses a base config that does not
support gobject-introspection.
- Update sample_python_gobject to use Glib to find the path of sh.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Other changes:
- Remove upstream patches.
- Change cross-compile options to upstream equivilants
- Add -Ddoctool=disabled to GOBJECT_INTROSPECTION_CONF_OPTS
- Change -Dcairo from a bool to a feature.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: keep patches ordering]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Other changes:
- Change -Dlibmount from a bool to a feature.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If multiple entries are specified for _MESON_EXTRA_BINARIES, the current
sed expression will only replace the first one.
Specifically, from GNU sed 4.8 the manual says:
/regexp/
Match lines matching the regular expression regexp. Matching
is performed on the current pattern space, which can be modified
with commands such as ``s///''.
so after the first binary has been added, the next entry no longer
matches since the pattern space has been modifed.
Instead of adding a script for each value, apply the match once and add
a subsitution for all entries at once.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: do a single substitution]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Mostly straightforward conversion but keeping custom config/build env
to apply the python2 workaround.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The conversion is mostly straightforward. The jsc binary was not
installed by the qt5webkit build system, so we're keeping some custom
hook to install it.
It's worth mentioning that the package build system installs
QtWebProcess in /usr/libexec/ instead of /usr/bin.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The values in the cross-compilation file are expected to be quoted with
single quotes, which we have in our template.
However, the endian value we are injecting comes from Kconfig, so it is
double-quoted, and those quotes end up in the cross-compilation files we
generate (the internal one, and the SDK one):
endian = '"little"'
So qstrip the value before we inject it.
Propagate the fix to the two generated files by using the same variable
HOST_MESON_TARGET_ENDIAN in both cases, rather than replicating the
(flawed) logic.
While at it, also use the common GCC_TARGET_CPU variable for the SDK
file too.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It seems the old method was missing some files from the install
step since after the conversion the following additional files
appear in target after a build with all config options selected:
usr/lib/qt/plugins/lipi_toolkit/libactivedtw.so
usr/lib/qt/plugins/lipi_toolkit/libboxfld.so
usr/lib/qt/plugins/lipi_toolkit/libl7.so
usr/lib/qt/plugins/lipi_toolkit/liblipiengine.so
usr/lib/qt/plugins/lipi_toolkit/liblogger.so
usr/lib/qt/plugins/lipi_toolkit/libneuralnet.so
usr/lib/qt/plugins/lipi_toolkit/libnn.so
usr/lib/qt/plugins/lipi_toolkit/libnpen.so
usr/lib/qt/plugins/lipi_toolkit/libpointfloat.so
usr/lib/qt/plugins/lipi_toolkit/libpreproc.so
usr/lib/qt/plugins/lipi_toolkit/libsubstroke.so
usr/lib/qt/plugins/virtualkeyboard/libqtvirtualkeyboard_lipi.so
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use generic configure command but for now keep custom build and
install logic, as we only build some parts of qt5tools depending on
the selected sub-options.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
$$(STAGING_DIR) -> $(STAGING_DIR) in PKG_MESON_INSTALL_CROSS_CONF.
$$ resulted in `$(STAGING_DIR)` in the file instead of the expanded
value.
Note that this change only affects the etc config at:
host/etc/meson/cross-compilation.conf
Per-package cross-compilation.conf files are already correct.
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The "network" script allows configuring an interface by means of two
/etc/ifup.<if_name> and /etc/ifdown.<if_name> files with the commands
required to bring it up and down, respectively. So we can support the
BR2_SYSTEM_DHCP config if netifrc is not selected.
- Replace the dependency on !BR2_PACKAGE_OPENRC in Config.in by a
dependency on !BR2_PACKAGE_NETIFRC.
- Add an IFUPDOWN_SCRIPTS_DHCP_OPENRC macro to create the ifup.<if_name>
and ifdown.<if_name> files.
- Add an IFUPDOWN_SCRIPTS_INSTALL_INIT_OPENRC hook that includes the
IFUPDOWN_SCRIPTS_{PREAMBLE,DHCP,DHCP_OPENRC} macros. LOCALHOST is not
required, since "lo" is configured by the "loopback" script.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr:
- adapt after the preamble was spit to itw own patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, we always suppose that localhost settings will always come
before the (optional) DHCP ones. This is always true when using
sysvinit/busybox or systemd.
However, with openrc, this will no longer be the case: only the DHCP
settings will be present (OpenRC handles lo on his own).
So, prepare the macros to be independent one from the other, and for
symetry, in both:
- use append-redirection >> to populate the interfaces file,
- prepend a leading empty line at the beginning of each section.
The origianl singe '>' redirection would ensure the file would not grow
on a reinstall, but that's no longer the case, so reset the file prior
to filling it, using the canned preamble.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Generate it in the IFUPDOWN_SCRIPTS_INSTALL_INIT_<FOO> hook. This will
allow creating a file to configure an interface via DHCP for the openrc
network service, in a forthcoming change.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Use the qmake infrastructure for its generic configure and build steps
but keep the manipulation of qwtconfig.pri as a PRE_CONFIGURE_HOOK as
well as the custom install steps.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The script is minuscle and can be useful to configure an interface via
DHCP at run-time.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Two simple tests to ensure that openrc boots without any services crashing
with a read only and a read write filing system.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: really check the init process]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a patch to prevent starting agetty on tty[1-6]. Buildroot starts a
single getty, according to the system configuration. Also tty[1-6] may
not even exist (e.g. embedded devices with serial consoles only).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In Buildroot getty is provided by BusyBox or util-linux (agetty). Both
create a /sbin/getty symlink pointing to the actual program, so make the
agetty service use that path instead of /sbin/agetty.
Also start agetty after all other services, to prevent mixing startup
messages with the getty prompt on devices with a single serial console,
as the custom unit we're dopping was doing already.
This allows us to drop the custom getty service, which causes an error
message from openrc 0.42.1 (in a forthcoming patch):
Error: getty is the name of a real and virtual service.
The patches are required because it's not possible to override the
command or startup order by means of a configuration file. Anyway it's
still better to patch something maintained upstream than depending on a
custom piece that may easily become obsolete.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr:
- expand commit log to explain why we ve 'after *' in the same patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Convert build, staging and target install to the qmake infra commands.
This removes a lot of conditional code because we solely rely on all install
rules being properly generated according to the configured options.
Of course we keep the configure command/logic as is, because qmake does not
yet exist.
Handling of the custom qt.conf is now done in the post staging hook.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we are about to convert qt5base to the qmake-package
infrastructure, we need to avoid a circular dependency: the qt5base
package itself should not depend on qt5base.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit converts the qextserialport to the qmake infra, which is a
straightforward conversion as it doesn't require any custom
environment option or additional hook.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This converts all qmake packages to the new infra for which no custom
environments, option or additional hooks are needed.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This provides generic functions for Qt5 qmake based packages. It will
make it possible to remove lots of redefinition of
QT5_xxx_{CONFIGURE|BUILD|INSTALL_STAGING}_CMDS. Additionally it
provides a generic target install method which will make most of the
package specific commands obsolete.
This is done by re-running the install step of the qmake generated
Makefile with the package build directory prepended (to the
staging/host path). Even though this does create lengthy pathes it
allows for easy separation of the staging files from the host destined
files by just omitting the resulting BUILD_DIR+HOST_DIR path from the
following rsync call to the real target folder. The cleanup of many
files we dont want in target is deferred to the target-finalize
step. In addition to what's being removed already, we also have to
cleanup some Qt5 specific files (prl) and the documentation directory.
This approach was chosen over copying all files recorded in the pkg-files-list
after some discussion which Thomas Petazzoni summed up:
"We don't yet use pkg-files-list really as part of the build
process anywhere, I feel a bit more comfortable at this point with what
Andreas is proposing."
Thanks to this infrastructure, it will be possible to get rid of the
many conditional install commands because qmake already takes care of
this when generating the Makefile install targets with the given or
autodetected configure options of each package.
However, custom install steps may have to remain in cases where a
particular Buildroot option has no corresponding setting in the
packages configuration options.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On master during the stabilisation phase, a new patch was added to
systemd; in parallel, on the next branch, systemd was bumped. Then, when
next was merged into master, there was no merge conflict, so the uneeded
patch was left unnoticed.
That patch was applied upstream, and is present in the version we now
have, so it no longer applies.
Drop that patch.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop first patch (already in version)
- Update second patch
- License is GPL-3.0+ since version 4.3.0 and
85094197cf
- Switch to cmake-package and so drop third patch as autotools is not
updated anymore (and fails to build due to missing po/Makefile.in.in)
- Add a mandatory dependency to mbedtls (to enable crypto support in
bctoolbox)
- Add bcg729, jpegturbo, libgsm, libpcap, libsrtp and zxing-cpp optional
dependencies
- Add a dependency on dynamic library as no pkg-config calls are done in
cmake (static build with ffmepg and opus will fail for example)
- Drop libupnp optional dependency (not available anymore)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add openssl linker flags via LIBS to fix configure gensio
library detection.
Fixes:
http://autobuild.buildroot.net/results/66e0d3e0a2a8dc5a62c267d16a53216f0f2ce8dd
checking gensio/gensio.h usability... yes
checking gensio/gensio.h presence... yes
checking for gensio/gensio.h... yes
checking for str_to_gensio in -lgensio... no
configure: error: libgensio won't link, please install gensio dev package
The build/ser2net-4.1.1/config.log files states:
.../arm-buildroot-linux-uclibcgnueabi/bin/ld: .../host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libgensio.a(gensio_filter_ssl.o): in function `gensio_do_ssl_init':
gensio_filter_ssl.c:(.text+0x34): undefined reference to `OPENSSL_init_ssl'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot's gitlab testing infra reported a build issue
with the qemu_arm_vexpress_tz_defconfig due to host-python3
modules issues [1]. Thoses issues has been fixed by the
previous patch.
But the defconfig doesn't boot with the current master
(2020.02-rc3).
It turn out that is an Qemu 4.2.0 regression that was
fixed upstream by [2]. This issue was found by using
git bisect old/new.
Fixes:
$ ../host/bin/qemu-system-arm -machine virt -machine secure=on -cpu cortex-a15 -smp 1 -s -m 1024 -d unimp -serial stdio -netdev user,id=vmnic -device virtio-net-device,netdev=vmnic -semihosting-config enable,target=native -bios bl1.bin
NOTICE: Booting Trusted Firmware
NOTICE: BL1: v2.0(release):2020.02-rc3-43-g9abf171ea6
NOTICE: BL1: Built : 12:44:52, Mar 8 2020
ERROR: Failed to load BL2 firmware.
After fixing host-python3 issue from [1]
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/456818689
[2] 21bf9b06cb
Signed-off-by: Adrien Grassein <adrien.grassein@smile.fr>
[Romain:
- improve commit log
- add upstream link
]
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Gerome Burlats <gerome.burlats@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
TypeError: cannot use a str to initialize an array with typecode 'B'
File "../../scripts/file_to_c.py", line 32, in main
for x in array.array("B", inf.read()):
for x in array.array("B", inf.read()):
TypeError: cannot use a str to initialize an array with typecode 'B'
TypeError: cannot use a str to initialize an array with typecode 'B'
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Peter: reword commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
optee-os needs host-python-pycrypto build for python3. The only way we can
force building host-python modules for python3 is to select python3 package
for the target.
Since we want to avoid adding more host-python3-<modules>
(host-python-pycrypto host-python-pyelftools), select python3 package
even if it's not used.
This problem will be fixed as soon as python2 is removed.
Fixes:
File "scripts/pem_to_pub_c.py", line 24, in main
from Crypto.PublicKey import RSA
ImportError: No module named 'Crypto'
https://gitlab.com/buildroot.org/buildroot/-/jobs/456818689
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xtensa ld fails with the following message
ld: BFD (GNU Binutils) 2.31.1 internal error, aborting at
elf32-xtensa.c:3283 in elf_xtensa_finish_dynamic_sections
during domoticz package build. It happens because of mismatch between
the size allocated for dynamic relocations in the executable image and
the number of PLT relocations actually written to the image. The
mismatch is caused by the fact that undefined weak symbol is treated as
dynamic (and thus needing PLT relocation), but xtensa linker not
expecting that.
Fixes: http://autobuild.buildroot.net/results/7885705f1b1c0f31cf21b464150f5509929c1906/
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Backported from: e15a8da9c71336b06cb5f2706c3f6b7e6ddd95a3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply patch from upstream and set PPPD_INGORE_CVES appropriately.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to set -DPROTOBUF_UPDATE_FILES=ON otherwise our protobuf
headers will be incompatible.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd-userdbd is a system service that multiplexes user/group lookups
to all local services that provide JSON user/group record definitions
to the system. In addition it synthesizes JSON user/group records from
classic UNIX/glibc NSS user/group records in order to provide full
backwards compatibility.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd-repart grows and adds partitions to a partition table, based on
the configuration files described in repart.d.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set default-dns-over-tls to opportunistic when dns-over-tls is enabled
as it should be fully backwards compatible. The DNSOverTLS config in
resolved.conf can be used to override default-dns-over-tls.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When running ser2net it looks for config files in the legacy conf
format and the new yaml format so we need to allow either in the
sysv init script.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a configuration to enable the JavaScript shell (default off). So
far only libmozjs is required (by polkit) and the shell takes around
24MiB.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The web-interface files (~1.8MB) are by default installed under
/usr/share/doc/cups, which is unfortunate as Buildroot removes usr/share/doc
in target-finalize, breaking the webui.
As a fix, store the web-interface files under /usr/share/cups/doc-root,
similar to how it is done in Debian.
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[Peter: use --with-docdir, update description]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The SWUPDATE_SET_BUILD_OPTIONS macro sets a number of swupdate
configuration options with local build details, especially the
cross-compiler path and sysroot path.
This means that if one stores an swupdate defconfig file as part of
Buildroot, generated with "make swupdate-update-defconfig", it will
contain things like:
CONFIG_CROSS_COMPILE="/home/thomas/projets/buildroot/output/host/bin/arm-linux-"
CONFIG_SYSROOT="/home/thomas/projets/buildroot/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot"
which obviously are not good, as they are specific to where the build
was done.
So instead this commit:
- Uses the CROSS_COMPILE environment variable to pass the
cross-compiler path.
- Drops entirely the use of CONFIG_SYSROOT, since all it does is pass
a --sysroot option to the compiler, which is not needed in the
context of Buildroot.
- Pass EXTRA_CFLAGS/EXTRA_LDFLAGS also through the environment.
Thanks to that the swupdate defconfig file no longer contains any
local build details, and can be re-used by different users of a given
Buildroot configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- disable introspection unconditionally (as already done for all
other original gstreamer1 packages)
- use '=' instead of '+=' for the first usage of GST1_VALIDATE_CONF_OPTS
Fixes:
http://autobuild.buildroot.net/results/e6e43fb85c71af9bb599ea8bbe2e805b392cf1ad
GEN GstValidate-1.0.gir
Couldn't find include 'GstPbutils-1.0.gir' (search path: '['/nvmedata/autobuild/instance-6/output-1/host/bin/../aarch64-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/usr/share/gir-1.0', '/nvmedata/autobuild/instance-6/output-1/host/share', 'gir-1.0', '/nvmedata/autobuild/instance-6/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')
make[5]: *** [Makefile:1612: GstValidate-1.0.gir] Error 1
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-thrift can fail if a broken Qt4 is found on host:
CMake Error in lib/cpp/CMakeLists.txt:
Imported target "Qt4::QtCore" includes non-existent path
"/nvmedata/autobuild/instance-4/output-1/host/usr/mkspecs/default"
in its INTERFACE_INCLUDE_DIRECTORIES. Possible reasons include:
* The path was deleted, renamed, or moved to another location.
* An install or uninstall procedure did not complete successfully.
* The installation package was faulty and references files it does not
provide.
Fixes:
- http://autobuild.buildroot.org/results/57cad5313896c868e99b0b9534678f1c83a386f2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If there is no infra set or infra is virtual the status is set to 'na'.
This is done for the follwing checks:
- license
- license-files
- hash
- hash-license
- patches
- version
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This value can be used for later processing.
In the buildroot-stats application this is used to create links pointing
to the git repo of buildroot.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Unify the status check information. The status is stored in a tuple. The
first entry is the status that can be 'ok', 'warning' or 'error'. The
second entry is a verbose message.
The following checks are performed:
- url: status of the URL check
- license: status of the license presence check
- license-files: status of the license file check
- hash: status of the hash file presence check
- patches: status of the patches count check
- pkg-check: status of the check-package script result
- developers: status if a package has developers in the DEVELOPERS file
- version: status of the version check
With that status information the following variables are replaced:
has_license, has_license_files, has_hash, url_status
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the function 'parse_developers' function from getdeveloperlib that
collect the information about the developers and the files they
maintain. Then set the maintainer(s) to each package.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch changes the type of the latest_version variable to a dict.
This is for better readability/usability of the data. With this the json
output is more descriptive in later processing of the json output.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the CVE checking phase, we can still see a huge amount of
Python processes (actually 128) running on the host, even though
the CVE step is entirely ran in the main thread.
These are actually the worker processes spawned to check for the
packages URL statuses and the latest versions from release-monitoring.
This is because of an issue in Python's multiprocessing implementation:
https://bugs.python.org/issue34172
The problem was already there before the CVE matching step was
introduced, but because pkg-stat was terminating right after the
release-monitoring step, it went unnoticed.
Also, do not hold a reference to the multiprocessing pool from
the Package class, as this is not needed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3, the functions from the subprocess module return bytes
(and no longer strings as in Python 2), which must be decoded for
further text operations.
Now, pkg-stats can be run in Python 3.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems like throughout the series that the CVE pkg-stats support
went through, the support for ignoring CVEs in the per-package
<pkg>_IGNORE_CVES variable was forgotten.
Let's re-introduce this, which is now very simple thanks to the CVE
class, its .identifier() propertly and the .is_cve_ignored() method of
the Package class
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changelog (since 1.60):
- 1.61 2020-01-11 Fixed errors in the documentation for bcm2835_spi_write.
Fixes issue seen on Raspberry Pi 4 boards where 64-bit off_t is used by
default via -D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64. The offset was
being incorrectly converted, this way is clearer and fixes the problem.
Contributed by Jonathan Perkin.
- 1.62 2020-01-12 Fixed a problem that could cause compile failures with
size_t and off_t
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tools option installs more than gst-launch and gst-inspect, so
simplify its prompt to just "install tools", and update the Config.in
help text. While at it, we list them alphabetically.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add tools option to disable building/installing of gst-discoverer,
gst-device-monitor and gst-play command line tools (similar to
BR2_PACKAGE_GSTREAMER1_INSTALL_TOOLS).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- drop legacy patch 0001-configure-add-disable-runtime-tests-option.patch
and use -Dtests=disabled instead
- drop host-pkgconf dependency as pkgconf is only used in case tests
are enabled to find the check package (checked via meson output -
no 'Found pkg-config' - and via strace)
- update host-python dependency to host-python3 as the script
libevdev/make-event-names.py which is used to generate the
header file event-names.h is updated to python3:
'#!/usr/bin/env python3'
This made no difference with autotools build as the script
was called with '$(PYTHON) libevdev/make-event-names.py'.
We use BR2_PYTHON3_HOST_DEPENDENCY instead of depending on
host-python3, to use any available Python 3.x interpreter on the
build machine instead of building our own, if possible.
- add patch to fix tools compile with older toolchains adding
the local include path (only the meson build is affected)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
checking for a Python interpreter with version >= 2.6... none
configure: error: no suitable Python interpreter found
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
checking for a Python interpreter with version >= 2.6... none
configure: error: no suitable Python interpreter found
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The hash for LICENSE has changed due to the copyright being updated and
the note about licensing types has been moved to the bottom.
The hash for chomp.c has been changed due to the copyright being updated and
code changes in that file.
Changelog:
https://github.com/troglobit/libite/releases/tag/v2.1.2
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The dependency for libite was removed in upstream commit e27bfbf
dating back a couple of years.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds an option to support installing firmware files for the
Microchip/Microsemi VSC85xx networking PHY family.
There is a mismatch between Linux and Linux-firmware on the name of the
PHY (Microchip vs Microsemi), due to the acquisition of Microsemi by
Microchip. We chose here the name in Linux-firmware, but mentioned the
other one in the Kconfig help of the option.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some symlinks were not created correctly when installing the
Linux-firmware package. This patch fixes the support for all symlinks of
the form:
a/foo -> bar
a/foo -> b/bar
a/foo -> ../b/bar
With this patch all forms of symlinks described in the WHENCE file
should be supported, whether they are in nested directories, or in
non-existing ones.
As some symlinks could be in directories that do not exist, we must
maje sure to canonicalize the path before testing the linked-to file.
We compared the symlinks installed pre-20200122 to what we have now, and
it seems we're handling all of them with this patch.
Fixes: 55df4059d2 ("package/linux-firmware: fix symlink support")
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
[yann.morin.1998@free.fr:
- use readlink in canonicalize-missing mode, to avoid
creating-then-removing directories
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Activate already existing mesa3d solution for the isinf compile
failure for uclibc based toolchains instead of using a custom
workaround.
- remove 0005-src-gallium-drivers-nouveau-codegen-nv50_ir_ra.cpp-p.patch
- add 0004-c99_math-import-isinf-for-uclibc-based-toolchains.patch
Fixes:
http://autobuild.buildroot.net/results/cbefc5d4a4fefb674e596400fa1d2698cd89c5b3/http://autobuild.buildroot.net/results/dc974da012f53fa4ed3be616f937b0afae423d66/
../src/gallium/drivers/nouveau/codegen/nv50_ir_ra.cpp: In member function 'bool nv50_ir::GCRA::simplify()':
../src/gallium/drivers/nouveau/codegen/nv50_ir_ra.cpp:1348:19: error: expected unqualified-id before '(' token
if (std::isinf(bestScore)) {
^
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It was discovered the fix for CVE-2018-19758 (libsndfile) was not
complete and still allows a read beyond the limits of a buffer in
wav_write_header() function in wav.c. A local attacker may use this flaw
to make the application crash.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is a heap-based buffer over-read at wav.c in wav_write_header in
libsndfile 1.0.28 that will cause a denial of service.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Several users of rolling-release distributions have been reporting on
IRC that Buildroot is broken now that they have switched to the newly
released make 4.3.
It turns out that the constructs we use to generated and include the
internal br2-external related fragments is no longer working with
make-4.3.
Indeed, an upstream bug report [0] seems to imply that it so far was
working by chance. There has been no further feedback, whether this is
really considered a fix for a previous ill-defined behaviour, or an
actual regression...
In the meantime, we add a workaround, suggested in that same bug report,
that fixes the issue for make 4.3, and that should not break on older
make versions either (verified on all relevant versions: from 3.81,
3.82, 4.0, 4.1, and 4.2).
[0] https://savannah.gnu.org/bugs/?57676
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Mircea Gliga <mgliga@bitdefender.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2019-1010301: jhead 3.03 is affected by: Buffer Overflow. The
impact is: Denial of service. The component is: gpsinfo.c Line 151
ProcessGpsInfo(). The attack vector is: Open a specially crafted JPEG
file.
- Fix CVE-2019-1010302: jhead 3.03 is affected by: Incorrect Access
Control. The impact is: Denial of service. The component is: iptc.c
Line 122 show_IPTC(). The attack vector is: the victim must open a
specially crafted JPEG file.
- Fix CVE-2019-19035: jhead 3.03 is affected by: heap-based buffer
over-read. The impact is: Denial of service. The component is:
ReadJpegSections and process_SOFn in jpgfile.c. The attack vector is:
Open a specially crafted JPEG file.
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2020-9402: Potential SQL injection via tolerance parameter in GIS
functions and aggregates on Oracle.
GIS functions and aggregates on Oracle were subject to SQL injection,
using a suitably crafted tolerance.
For more details, see the advisory:
https://www.djangoproject.com/weblog/2020/mar/04/security-releases/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9ea528f84b (package/python-nfc: bump to version 0.13.5) changed the
python-nfc package to download from github, so the package no longer needs
bzr on the host.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add patch to fix static linking of tools.
Fixes:
http://autobuild.buildroot.net/results/b33019b3c9ad856aced34215c69bb292b536e25e
.../bin/ld: .../usr/lib/libgstreamer-1.0.a(gstplugin.c.o): in function `gst_plugin_register_func':
gstplugin.c:(.text+0x3bc): undefined reference to `g_module_make_resident'
.../bin/ld: .../usr/lib/libgstreamer-1.0.a(gstplugin.c.o): in function `_priv_gst_plugin_load_file_for_registry':
gstplugin.c:(.text+0x1228): undefined reference to `g_module_supported'
.../bin/ld: gstplugin.c:(.text+0x126c): undefined reference to `g_module_open'
.../bin/ld: gstplugin.c:(.text+0x1368): undefined reference to `g_module_symbol'
.../bin/ld: gstplugin.c:(.text+0x1494): undefined reference to `g_module_supported'
.../bin/ld: gstplugin.c:(.text+0x17f4): undefined reference to `g_module_close'
.../bin/ld: gstplugin.c:(.text+0x1a2c): undefined reference to `g_module_error'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With classpath removed, no packages select these symbols any more - So drop
them and their corresponding logic in dependencies.sh / genrandconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package has been abandoned by upstream since 2016 and has not
had a release since 2012. In addition the GNU Compiler for Java
that classpath was written to be used with has been removed as of
GCC 7.
It is no longer feasible to support classpath as it requires a java
compiler capable of producing java 1.5 compatible bytecode which is
not possible on hosts with a recent java compiler.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop both patches:
- 0001-Prepend-zero-byte-before-unsigned-integers.patch is upstream
as of 949ae648bf7c654b8fae607a0988bfa672607156
- 0002-mib.c-allow-unsigned-integers-to-have-an-extra-byte.patch is
upstream as of
Use the systemd unit file provided by the upstream project instead of
our own, just add an /etc/default/ file to add the -a option to
preserve the same behavior.
This new version now needs pkg-config.
v1.6 changelog:
Bug fix release.
- Fix#16: regression in ifTable for point-to-point interfaces
- Fix#17: major memory leak in Linux backend
- Fix#18: consistent timeout handling in .conf file and command line
v1.5 changelog:
Major feature release. Support for TCP-MIB, UDP-MIB, IP-MIB,
ifXTable with 64-bit counters.
- Majority of new features from [NDM Systems][]
- CVE fixes from [Cisco Talos Intelligence Group][talos]
- Add support for ifXTable (64-bit counters), from NDM Systems
- Add support for TCP-MIB, from NDM Systems
- Add support for UDP-MIB, from NDM Systems
- Add support for IP-MIB, from NDM Systems
- Add support for ifType
- Add support for ifMtu
- Binary and man page renamed: `mini_snmpd` --> `mini-snmpd`
- New command line option `-l LEVEL` replaces `--verbose`
- New command line option `-v` to show program version
- Create PID file when daemon is ready to receive signals
- Add support for systemd unit file on Linux
- Add support for /etc/mini-snmpd.conf, disabled by default
- CVE-2020-6060: Fix stack overflow in client connection handler
- CVE-2020-6059: Fix out-of-bounds read in parsing of SNMP packet
- CVE-2020-6058: Fix out-of-bounds read in parsing of SNMP packet
- Let `-s` flag control use of syslog, when running in foreground
- Removed all (known) GNU:isms; i.e., `__progname` and `%m`
Signed-off-by: Alexander Sverdlin <alexander.sverdlin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Directory traversal vulnerability in ZZIPlib 0.13.69 allows attackers to
overwrite arbitrary files via a .. (dot dot) in a zip file, because of
the function unzzip_cat in the bins/unzzipcat-mem.c file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
An issue was discovered in ZZIPlib through 0.13.69. There is a memory
leak triggered in the function __zzip_parse_root_directory in zip.c,
which will lead to a denial of service attack.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GNU patch through 2.7.6 is vulnerable to OS shell command injection that
can be exploited by opening a crafted patch file that contains an ed
style diff payload with shell metacharacters. The ed editor does not
need to be present on the vulnerable system. This is different from
CVE-2018-1000156.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In GNU patch through 2.7.6, the following of symlinks is mishandled in
certain cases other than input files. This affects inp.c and util.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
do_ed_script in pch.c in GNU patch through 2.7.6 does not block strings
beginning with a ! character. NOTE: this is the same commit as for
CVE-2019-13638, but the ! syntax is specific to ed, and is unrelated to
a shell metacharacter.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The comment "Check files that are touched by more than one package"
was previously located right before the calls to the check-uniq-files
script. However, this script and the logic calling it have been
removed in commit 2496189a42 ("core:
drop check-uniq-files"), so the comment no longer makes any sense:
let's drop it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Linux-firmware's commit 9cfefbd7fbda ("Remove duplicate symlinks")
symlinks aren't distributed anymore. They are rather created at
installation time by a script provided in the project, copy-firmware.sh.
The description of the symlinks is done in the WHENCE file. Since the
bump to version 20200122, in commit 48cc1a89ae, installation for many
firmwares was broken as Buildroot tried to install missing symlinks from
Linux-firmware.
The fix is not only to remove now missing symlinks, but to add logic to
create those symlinks as kernel modules will depend on them. The
solution taken by this patch is to create dynamically symlinks based on
their description in the WHENCE file *and* only if the file they'll
point to was installed in the target directory.
Fixes: 48cc1a89ae ("package/linux-firmware: bump to version 20200122")
Cc: james.hilliard1@gmail.com
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
[yann.morin.1998@free.fr:
- don't use a post-install hook
- consolidate grep+sed into a single sed
- split long ling
- detect ln error and exit
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LibVNC commit before d01e1bb4246323ba6fcee3b82ef1faa9b1dac82a contains a
memory leak (CWE-655) in VNC server code, which allow an attacker to
read stack memory and can be abused for information disclosure. Combined
with another vulnerability, it can be used to leak stack memory and
bypass ASLR. This attack appear to be exploitable via network
connectivity. These vulnerabilities have been fixed in commit
d01e1bb4246323ba6fcee3b82ef1faa9b1dac82a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LibVNC through 0.9.12 contains a heap out-of-bounds write vulnerability
in libvncserver/rfbserver.c. The fix for CVE-2018-15127 was incomplete.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During the CVE checking phase, we can still see a huge amount of
Python processes (actually 128) running on the host, even though
the CVE step is entirely ran in the main thread.
These are actually the worker processes spawned to check for the
packages URL statuses and the latest versions from release-monitoring.
This is because of an issue in Python's multiprocessing implementation:
https://bugs.python.org/issue34172
The problem was already there before the CVE matching step was
introduced, but because pkg-stat was terminating right after the
release-monitoring step, it went unnoticed.
Also, do not hold a reference to the multiprocessing pool from
the Package class, as this is not needed.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Python 3, the functions from the subprocess module return bytes
(and no longer strings as in Python 2), which must be decoded for
further text operations.
Now, pkg-stats can be run in Python 3.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The TagLib::Ogg::FLAC::File::scan function in oggflacfile.cpp in TagLib
1.11.1 allows remote attackers to cause information disclosure
(heap-based buffer over-read) via a crafted audio file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In TagLib 1.11.1, the rebuildAggregateFrames function in
id3v2framefactory.cpp has a pointer to cast vulnerability, which allows
remote attackers to cause a denial of service or possibly have
unspecified other impact via a crafted audio file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building qdoc requires a llvm and clang for the host.
However, there is a limitation in the llvm and clang packages in
Buildroot, which makes it impossible to have a host variant without
a target variant.
So, propagate the dependencies of the target llvm and clang, to ensure
we can only have a host-llvm and -clang packages that are correctly
built.
Note that we do propagate all of the dependencies (instead of just the
architecture part), to be consistent.
Reported-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin@orange.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes the following CVEs:
- CVE-2020-9428:
In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14,
the EAP dissector could crash. This was addressed in
epan/dissectors/packet-eap.c by using more careful sscanf parsing.
- CVE-2020-9429:
In Wireshark 3.2.0 to 3.2.1, the WireGuard dissector could crash.
This was addressed in epan/dissectors/packet-wireguard.c by
handling the situation where a certain data structure intentionally
has a NULL value.
- CVE-2020-9430:
In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14,
the WiMax DLMAP dissector could crash.
This was addressed in plugins/epan/wimax/msg_dlmap.c by validating
a length field.
- CVE-2020-9431:
In Wireshark 3.2.0 to 3.2.1, 3.0.0 to 3.0.8, and 2.6.0 to 2.6.14,
the LTE RRC dissector could leak memory. This was addressed in
epan/dissectors/packet-lte-rrc.c by adjusting certain append operations.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bark_noise_hybridmp in psy.c in Xiph.Org libvorbis 1.3.6 has a
stack-based buffer over-read.
Same patch as for CVE-2017-14160
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- update 0001-*.patch to also reference CVE-2018-10393
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
mapping0_forward in mapping0.c in Xiph.Org libvorbis 1.3.6 does not
validate the number of channels, which allows remote attackers to cause
a denial of service (heap-based buffer overflow or over-read) or
possibly have unspecified other impact via a crafted file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
blktrace (aka Block IO Tracing) 1.2.0, as used with the Linux kernel and
Android, has a buffer overflow in the dev_map_read function in
btt/devmap.c because the device and devno arrays are too small, as
demonstrated by an invalid free when using the btt program with a
crafted file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
While investigating [1] one units failed due to missing kernel option
CONFIG_BINFMT_MISC needed by "proc-sys-fs-binfmt_misc.mount" service.
It's because the kernel support autofs4 but not MISC binaries.
Since the systemd test infra use the default defconfig (vexpress),
we need to provide a linux fragment to enable CONFIG_BINFMT_MISC.
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/454255917
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- move the kernel config with the others in conf/
]
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in Pure-FTPd 1.0.49. An out-of-bounds (OOB) read
has been detected in the pure_strcmp function in utils.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In Pure-FTPd 1.0.49, a stack exhaustion issue was discovered in the
listdir function in ls.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
opj_t1_clbl_decode_processor in openjp2/t1.c in OpenJPEG 2.3.1 through
2020-01-28 has a heap-based buffer overflow in the qmfbid==1 case, a
different issue than CVE-2020-6851.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
OpenJPEG through 2.3.1 has a heap-based buffer overflow in
opj_t1_clbl_decode_processor in openjp2/t1.c because of lack of
opj_j2k_update_image_dimensions validation.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In OpenJPEG 2.3.1, there is excessive iteration in the
opj_t1_encode_cblks function of openjp2/t1.c. Remote attackers could
leverage this vulnerability to cause a denial of service via a crafted
bmp file. This issue is similar to CVE-2018-6616.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libhttp/url.c in shellinabox through 2.20 has an implementation flaw in
the HTTP request parsing logic. By sending a crafted multipart/form-data
HTTP request, an attacker could exploit this to force shellinaboxd into
an infinite loop, exhausting available CPU resources and taking the
service down.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
An issue was discovered in Suricata 5.0.0. It is possible to
bypass/evade any tcp based signature by overlapping a TCP segment with a
fake FIN packet. The fake FIN packet is injected just before the PUSH
ACK packet we want to bypass. The PUSH ACK packet (containing the data)
will be ignored by Suricata because it overlaps the FIN packet (the
sequence and ack number are identical in the two packets). The client
will ignore the fake FIN packet because the ACK flag is not set. Both
linux and windows clients are ignoring the injected packet.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libcgroup up to and including 0.41 creates /var/log/cgred with mode 0666
regardless of the configured umask, leading to disclosure of information
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In Jp2Image::readMetadata() in jp2image.cpp in Exiv2 0.27.2, an input
file can result in an infinite loop and hang, with high CPU consumption.
Remote attackers could leverage this vulnerability to cause a denial of
service via a crafted file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add an upstream patch to fix CVE-2018-19876: cairo 1.16.0, in
cairo_ft_apply_variations() in cairo-ft-font.c, would free memory using a
free function incompatible with WebKit's fastMalloc, leading to an
application crash with a "free(): invalid pointer" error.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Exiv2 0.27.2 allows attackers to trigger a crash in Exiv2::getULong in
types.cpp when called from Exiv2::Internal::CiffDirectory::readDirectory
in crwimage_int.cpp, because there is no validation of the relationship
of the total size to the offset and size.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2019-15682: RDesktop version 1.8.4 contains multiple
out-of-bound access read vulnerabilities in its code, which results in
a denial of service (DoS) condition. This attack appear to be
exploitable via network connectivity. These issues have been fixed in
version 1.8.5
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
keymaps and save-keymaps require kbd_mode and dumpkeys, respectively, so
remove them if the kbd package is not selected (e.g. devices with serial
console, only).
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- expand to three commands to match the existing hook
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This CVE does not affect the boost package, but is misclassified by our
CVS tracker. As per the advisory:
Unspecified vulnerability in Boost before 6.x-1.03, a module for
Drupal, allows remote attackers to create new webroot directories
via unknown attack vectors.
Ignore the CVS, and expand a comment to explain it.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: expand the comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
openrc provides scripts that have been written for the big-gun kmod, and
so use options unknown to the busybox' provided applets:
- Busybox modprobe does not have a "--first-time" option,
- the "--verbose" option is just "-v",
- the "--use-blacklist" option is just "-b". Also blacklist support is
not selected in our default busybox configuration.
One of two options, is to "fix" or "adapt" openrc's scripts to busybox,
which means for the openrc package to go peek into files from the
busybox package, which is not nice, and can't work because that is not
available by the time we scan our Makefiles.
The other option, which this patch implements, is to just add a
dependency onto kmod and its tools.
Reported-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In all steps, we print the message indicating the start of the step
using the MESSAGE macro before running pre-hooks. Except in the image
installation step, where the message is printed after the pre-hooks.
Let's fix this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
modern versions of exim are installed into sbin not bin
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-9308: archive_read_support_format_rar5.c in libarchive
before 3.4.2 attempts to unpack a RAR5 file with an invalid or
corrupted header (such as a header size of zero), leading to a SIGSEGV
or possibly unspecified other impact.
- use --with-nettle to enable nettle support, see
f96a71144b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- drop new optional dependency to mbedtsl, forced off for now
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In libssh2 v1.9.0 and earlier versions, the SSH_MSG_DISCONNECT logic in
packet.c has an integer overflow in a bounds check, enabling an attacker
to specify an arbitrary (out-of-bounds) offset for a subsequent memory
read. A crafted SSH server may be able to disclose sensitive information
or cause a denial of service condition on the client system when a user
connects to the server.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A vulnerability was found in dnsmasq before version 2.81, where the
memory leak allows remote attackers to cause a denial of service
(memory consumption) via vectors involving DHCP response creation.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix CVE-2019-17543: LZ4 before 1.9.2 has a heap-based buffer overflow
in LZ4_write32 (related to LZ4_compress_destSize), affecting
applications that call LZ4_compress_fast with a large input. (This
issue can also lead to data corruption.) NOTE: the vendor states "only
a few specific / uncommon usages of the API are at risk."
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2019-20044: In Zsh before 5.8, attackers able to execute
commands can regain privileges dropped by the --no-PRIVILEGED option.
Zsh fails to overwrite the saved uid, so the original privileges can
be restored by executing MODULE_PATH=/dir/with/module zmodload with a
module that calls setuid().
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the FOSDEM2019 develop days, Qt 5.6 is very old (5.6.3
was released in September 2017, and 5.6.x became EOL in March 2019), so drop
it before the new Buildroot LTS release:
https://elinux.org/Buildroot:DeveloperDaysFOSDEM2019#Qt5_versions_to_support:_keep_5.6_or_a_newer_LTS.3F
And add legacy handling for it.
There are a number of places where code checks for
BR2_PACKAGE_QT5_VERSION_LATEST, so leave that as a blind option for now to
not break the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current solution used to collect the list of files installed by
packages does not work for top-level parallel build. Indeed, we rely
on a file created after the installation of the previous package to
build the list of files installed by the current package.
This works well when packages are built sequentially, but badly fails
when using top-level parallel build.
More specifically, top-level parallel build can fail with:
comm: /home/thomas/buildroot/output/build/.files-list-host.new: No such file or directory
Because that file has been removed concurrently by the build process
of another package.
This commit reworks the logic in a very straight-forward way. Before
the installation of each package, we store the list of files that are
already installed and store it in the package build directory. After
the installation of each package, we store again that list of files,
calculate the difference with the before file, and store that as the
list of files installed by that package, still in the package build
directory.
At the end of the build, in target-finalize we collect all the
collected information into the global package file lists, that
continue to be installed in the same location as before, with the same
name.
There are however some differences:
(1) The files are no longer ordered in build order, but by alphabetic
ordering of packages. Indeed, "build order" no longer makes any
sense in the context of top-level parallel build.
(2) Some files which were incorrectly tracked are no longer
tracked. For example, the toolchain package is a target package,
but it installs files in $(HOST_DIR). In the previous logic, the
files installed by the toolchain package in $(HOST_DIR) were
incorrectly affected to the next host package that was installed
after the toolchain package. With our new logic, those files are
no longer tracked at all. To fix this, we would have to change
the logic to scan HOST_DIR/TARGET_DIR/STAGING_DIR for all
installation steps, not just for the install-host, install-target
and install-staging steps respecitively. But the result was
already incorrect anyway, and therefore this should be fixed
separately.
Note that the check_bin_arch hook needs to be adjusted: it was using
the global package-file-list.txt file, but this file is now created
only at the very end of the build. So instead, we use the current
package .file-list.txt file to know which packages have been installed
by the current package in $(TARGET_DIR).
Fixes:
http://autobuild.buildroot.net/results/4e60fa31b1cd08bc7fdf9c5dd3a3f4941e029ba3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the same trick in step_pkg_size as the one used in check_bin_arch:
factorize the two $(filter ...) calls into one, checking in one step
the step and whether it's the beginning or end of the step.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release, fixing a number of issues. For details, see the
announcement:
https://docs.python.org/release/3.8.2/whatsnew/changelog.html#python-3-8-2-final
Adjust the spacing in the hash file and update the hash of the license file
for a change in copyright years:
-2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019 Python Software Foundation;
+2011, 2012, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Python Software Foundation;
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed by Peter combined condition of the 2 gcc bugs is potentially
wrong, but as Thomas pointed in this case it's not harmful. Let's fix it
anyway since it's basically wrong even it doesn't cause harm.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-swig package installs the swig binary as 'swig' and adds a
swig<major> symlink (E.G. swig4.0). This causes issues for older software
which may not know about the 4.0 version of swig, E.G. CMake 3.10.x
contains the following swig detection logic:
find_program(SWIG_EXECUTABLE NAMES swig3.0 swig2.0 swig)
If the host has a 3.x or 2.x variant of swig installed, then that will be
used instead of our host-swig.
As a workaround, also add a swig3.0 symlink so our host-swig will be used.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Peter: reworded]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Select udev-gentoo-scripts and avoid installing the sysv init script.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: use a fake openrc init hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Gentoo scripts to initialize udev via openrc, to be used by eudev.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr: fix commit title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2020-9273: In ProFTPD 1.3.7, it is possible to corrupt the memory pool
by interrupting the data transfer channel. This triggers a use-after-free
in alloc_pool in pool.c, and possible remote code execution.
And additionally, fixes a number of other issues. For details, see the
release notes:
https://github.com/proftpd/proftpd/blob/1.3.6/RELEASE_NOTES
This also bumps the bundled libcap, so
0001-fix-kernel-header-capability-version.patch can be dropped.
While we are at it, adjust the white space in the .hash function to match
the new agreements.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Similar to the fix for the base beaglebone defconfig in commit 38912a61be
(configs/beaglebone: kernel builds needs host-openssl), the qt5 variant uses
the same kernel, so also needs host-openssl.
Fixes:
914 scripts/extract-cert.c:21:25: fatal error: openssl/bio.h: No such file or directory
915 #include <openssl/bio.h>
https://gitlab.com/buildroot.org/buildroot/-/jobs/451176891
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The recent bump of python-pyyaml to version 5.3 causes a runtime
failure in docker-compose:
pkg_resources.ContextualVersionConflict: (PyYAML 5.3 (/usr/lib/python3.8/site-packages), Requirement.parse('PyYAML<5.2,>=3.10'), {'docker-compose'})
https://gitlab.com/buildroot.org/buildroot/-/jobs/442151461
Fix it by adjusting 0003-support-PyYAML-up-to-5.1-version.patch to
allow all pyyaml 5.x versions, similar to what upstream has done
post-1.24.1:
c818bfc62c
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also:
* Drop patch 0003 which is included in the new version.
* Update hash value of the COPYRIGHT file as the copyright year was
updated.
>From the release history [1]:
This release moves all 32-bit archs to 64-bit time_t, enabling them
to represent times beyond January of 2038.
There are no new requirements on kernel version, and this is not a
hard ABI break, but the type changes do impact compatibility between
code built against previous versions of musl and code built against
musl 1.2. Users upgrading 32-bit systems should read the detailed
time64 release notes [2]. 64-bit systems are not affected.
In addition, character data has been updated to align with Unicode
12.1.0, along with fixes for some errors in the data and a replacement
for inefficient and unmaintainable case-mapping code. Correctness of
results has been improved in the math library, particularly some complex
functions and 32-bit x86 asm. Various arch-specific bugs have also been
fixed.
[1] https://musl.libc.org/releases.html
[2] https://musl.libc.org/time64.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch for avro-c that was applied upstream
- Fix inconsistency in PYTHON_AVRO_SITE
- Adopt new spacing convention in .hash files
- Add upstream patch for python-avro
- Add patch to remove installation-time linting in python-avro
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
0001-configure-add-without-demo-option: adapt patch to 5.2.8 version
0002-use-gdlib-config-properly: already applied upstream
Signed-off-by: Michael Fischer <mf@go-sys.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building host-util-linux, the systemdsystemunitdir is set to the
real host directory, so the install step fails with:
/usr/bin/install: cannot remove '/usr/lib/systemd/system/fstrim.service': Permission denied
/usr/bin/install: cannot remove '/usr/lib/systemd/system/fstrim.timer': Permission denied
Since we don't need systemd support in host-util-linux, unconditionally
disable it for the host build.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 3f8ace0028
("board/freescale/common/imx: add support for i.MX8") had its
conflicts incorrectly tweaked when applied to Buildroot. The
ahab-container.img is installed with this name (ahab-container.img) by
the imx-firmware package, and not mx8qm-ahab-container.img or
mx8qx-ahab-container.img.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Julien Olivain <juju@cotds.org>
Tested-by: Julien Olivain <juju@cotds.org>
Reported-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
brltty builds host tools which rely on the expat library, and
pkg-config is used to detect the expat library.
Since commit cd16e18584 ("pkgconf:
always keep system libs"), the wrapper script added
--keep-system-libs, which adds a -L$(STAGING_DIR)/usr/lib to the
pkg-config results instead of just -lexpat. So, previously, by chance,
the pkg-config result for the target expat was "good enough" for the
host expat as well. But now that -L$(STAGING_DIR)/usr/lib is added, it
breaks the build in all sort of ways as obviously building host
binaries with the library search path pointing to $(STAGING_DIR) is
not a good idea.
To fix that, this commit adjusts the brltty build system so that the
PKG_CONFIG_FOR_BUILD variable is used when using pkg-config to build
host binaries.
Fixes:
http://autobuild.buildroot.net/results/5a64dfb845389882c366b6c91aaf5868c090a802/
Many thanks to the initial work from Fabrice Fontaine at
http://patchwork.ozlabs.org/patch/1238163/ which provided an initial
starting point for this investigation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also add the line "HOST_VALA_CONF_OPTS += --disable-valadoc"
as valadoc requires libgvc which is not available in Buildroot.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a patch to correct a typo in the Makefile, so -fno-stack-protector /
-fno-stack-protector-all are really used. With this applied, kvm-unit-tests
will always be built without SSP as intented by upstream. This will fix the
build on ppc64 with SSP that started to fail for an unknown reason since
November 27th.
Moreover, the Arch Linux workaround could also be removed in a follow-up
patch.
Fixes:
- http://autobuild.buildroot.org/results/ad689b08173548af21dd1fb0e827fd561de6dfef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This includes the following changes:
66c8f65 Makefile.am: use BUILT_SOURCES instead of BUILD_SOURCES
f7a354d Generate image headers from their PNG source, while still including them in dist tarball
983837e Import png source for images, extracted from headers
3bd1557 Cleanup poky logo
773a397 Add configure flags for fullscreen logo and no startup message
2913c24 Double buffering support
8188d68 Support --with-font configure option to use other font headers
88c4b71 Add SPDX License information to files, drop boilerplate
904f4aa add systemd support
e94bd11 process consecutive commands
568f28e use /run for communication FIFO
ee053e0 add recovered bar.png
2015f70 Fix text width calculation.
Also:
- remove the 'psplash-quit.service' unit file
- add 'psplash-systemd.service' to use the new systemd support in psplash
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For additional post-244 fixes.
Update the hash of the README after commit faba5b2b (Revert "Drop dbus
activation stub service") changed a comment about dbus:
- dbus >= 1.11.0 (strictly speaking optional, but recommended)
+ dbus >= 1.4.0 (strictly speaking optional, but recommended)
+ NOTE: If using dbus < 1.9.18, you should override the default
+ policy directory (--with-dbuspolicydir=/etc/dbus-1/system.d).
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed during the FOSDEM2019 develop days, Qt 5.6 is very old (5.6.3
was released in September 2017, and 5.6.x became EOL in March 2019), so drop
it before the new Buildroot LTS release:
https://elinux.org/Buildroot:DeveloperDaysFOSDEM2019#Qt5_versions_to_support:_keep_5.6_or_a_newer_LTS.3F
And add legacy handling for it.
There are a number of places where code checks for
BR2_PACKAGE_QT5_VERSION_LATEST, so leave that as a blind option for now to
not break the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Workaround for:
ld: hv_vss_daemon.o: unable to initialize decompress status for section .debug_info
ld: hv_vss_daemon.o: unable to initialize decompress status for section .debug_info
hv_vss_daemon.o: file not recognized: File format not recognized
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch to correct a typo in the Makefile, so -fno-stack-protector /
-fno-stack-protector-all are really used. With this applied, kvm-unit-tests
will always be built without SSP as intented by upstream. This will fix the
build on ppc64 with SSP that started to fail for an unknown reason since
November 27th.
Moreover, the Arch Linux workaround could also be removed in a follow-up
patch.
Fixes:
- http://autobuild.buildroot.org/results/ad689b08173548af21dd1fb0e827fd561de6dfef
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The NVD files that are used to build the list of CVEs affecting
Buildroot packages are quite large (a few hundreds MB of json),
and cause the pkg-stats scripts to have a huge memory footprint
(a few GB with Python 2.7).
However, because we only need to iterate on CVE items one by one,
we can process them in streaming (ie decoding one CVE at a time
from the JSON representation). Because the json module from the
python standard library does not support such a mode of operation,
we switch to the third-party package ijson, which is compatible
with both Python 2 and Python3.
To run the script with these modifications, one should install
the ijson python package. This can be done with pip:
`pip install ijson`. On Debian based distributions, this can
also be done with the apt package manager:
`apt install python-ijson`.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop second and third patches (already in version)
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The regular expressions used in the sed commands assumes that there is a
space after '/dev/root' but the skeleton file contains a tab. Use a more
flexible '[[:blank:]]', instead.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This bump also includes:
* Drop upstream security patch which is included in the new version
* Unconditionally disable support for Qt5 [1] (same as Qt3 and Qt4)
* Drop dependency on host-inttool, as avahi switched to host-gettext [2]
* Conditionally enable support for libevent [3]
[1] 5dbb32767a
[2] 3d5a0c6805
[3] 998e20cd76
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A project could quite possibly have a custom rcw file
that does not rely on any custom rcw include files (rcwi).
Allow the build to succeed if this is the case.
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
[yann.morin.1998@free.fr: install includes in a separate hook]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in BUSYBOX_INSTALL_TARGET_CMDS,
not in BUSYBOX_INSTALL_INIT_SYSV. This should have been done in commit
b1e07d6d79 but was somehow lost during the
review/aply process.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GCC later than 5.x produce _fdti1.so file with an undefined
symbol str2charp_size due to C99 inline semantics change. So
remove this keyword.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr: add upstream status]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bugfix release, fixing a number of issues:
- Fixed mixing salted and unsalted sessions in the same ESAPI context
- Removed use of VLAs from TPML marshal code
- Added check for object node before calling compute_session_value function
- Fixed auth calculation in Esys_StartAuthSession called with optional parameters
- Fixed compute_encrypted_salt error handling in Esys_StartAuthSession
- Fixed exported symbols map for libtss2-mu
The 2.3.3 tarball accidently contains a Makefile-fuzz-generated.am with
content from a fuzz testing run (rather than an empty file as in earlier
releases), confusing autoreconf together with our
0001-configure-Only-use-CXX-when-fuzzing.patch.
Work around that by adding a post-patch hook to truncate the file. The
issue has been reported upstream and the release logic has been changed to
ensure this does not happen again for future releases:
d163041e3b
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Unlike <PKG>_DEPENDENCIES, <PKG>_PATCH_DEPENDENCIES only guarantees
extract and patch of listed dependencies, not build. Make this subtlety
more explicit in the documentation.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[yann.morin.1998@free.fr: slight fix]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Fix potential memory overread when performing an ECDSA signature
operation. The overread only happens with cryptographically low
probability (of the order of 2^-n where n is the bitsize of the
curve) unless the RNG is broken, and could result in information
disclosure or denial of service (application crash or extra resource
consumption).
- To avoid a side channel vulnerability when parsing an RSA private
key, read all the CRT parameters from the DER structure rather than
reconstructing them.
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- systemd optional dependency has been added in version 7.0
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, the Config.in file has the line:
select BR2_PACKAGE_PYTHON3 if !BR2_PACKAGE_PYTHON
This line is incorrect as gobject-introspection does not support python2.
Instead, remove the select line and make python3 a dependency with a new
message that explains that gobject-introspection requires python3.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- move the explanations from the commit log to the code
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Removed patch that was applied upstream
- Removed AUTORECONF request that came with patch
- Updated library's download name
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We don't provide a configuration file, so disable radvd by default.
Update the help message with instructions on how to enable radvd at
build time with systemd.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit adds a user-visible option
BR2_TOOLCHAIN_EXTERNAL_HAS_SSP_STRONG, which will allow the user to
indicate if the custom external toolchain does or does not have
SSP_STRONG support. Depending on this, the user will be able to use
(or not) the BR2_SSP_STRONG option.
Checking if what the user said is true or not about this is already
done in toolchain/toolchain-external/pkg-toolchain-external.mk:
$$(Q)$$(call check_toolchain_ssp,$$(TOOLCHAIN_EXTERNAL_CC),$(BR2_SSP_OPTION))
If the user selects BR2_SSP_STRONG, this will check if
-fstack-protector-strong is really supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This will allow toolchain to indicate if they support
-fstack-protector-strong or not.
Whenever the gcc version is >= 4.9, we always have SSP_STRONG support
if we have SSP support. However, some toolchains older than gcc 4.9
might have backported SSP_STRONG support, which is why we cannot rely
just on BR2_TOOLCHAIN_GCC_AT_LEAST_4_9.
Having this "default" value allows to avoid adding a "select
BR2_TOOLCHAIN_HAS_SSP_STRONG" in the internal toolchain logic plus in
almost external toolchains. But it allows custom external toolchains
that are pre-4.9 to potentially declare that they support strong SSP.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix a check-package error introduce by 6bf74ce3db (package/sdbusplus:
create m4 directory before autoreconf):
package/sdbusplus/sdbusplus.mk:29: expected indent with tabs
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: John Faith <jfaith@impinj.com>
Cc: Michael Walle <michael@walle.cc>
GObject introspection is a middleware layer between C
libraries (using GObject) and language bindings. The C library
can be scanned at compile time and generate a metadata file,
in addition to the actual native C library. Then at runtime,
language bindings can read this metadata and automatically
provide bindings to call into the C library.
There's an XML format called GIR used by GObject-Introspection.
The purpose of it is to provide a standard structure to access the complete
available API that a library or other unit of code exports. It's
language-agnostic using namespaces to separate core, language, or
library-specific functionality.
Cross-compiling gobject-introspection is not an easy task. The main issue is
that in the process of creating the XML files, gobject-introspection must first
run and scan the binary, which, if the binary is cross-compiled, would not
typically be possible from the host system.
Because of this limitation, we use several wrappers to call instead first out
qemu, which runs the native scanner to create the binaries.
There are seven total patches and four different wrapper files needed to
successfully cross-compile and run this package, many of them are from
open-embedded, but one of them is of my own doing.
1) Revert a previous, incomplete attempt at adding cross-compiling support.
2) Add support for cross-compiling with meson.
3) Disable tests.
4) Add an option to use a binary wrapper; this patch will force giscanner to
use a wrapper executable to run binaries it's producing, instead of
attempting to run them from the host.
5) Add an option to use an LDD wrapper, again, useful for cross-compiled
environments.
6) Add a --lib-dirs-envar option to pass to giscanner. (See patch for details.)
7) Add rpath-links to ccompiler: when passing the PACKAGE_GIR_EXTRA_LIBS_PATH
to the ccompiler.py script, ccompiler.py needs to add -Wl,-rpath-link to the
environment for the package to correctly link against the passed on paths.
8) Ignore error return codes from ldd-wrapper because prelink-rtld returns 127
when it can't find a library, which breaks subprocess.check_output().
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr:
- host-prelink-cross has no Kconfig entry
- reorder dependencies for arch deps first
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Many autotools packages call pkg-conf to inquire as to where the following
utilities are:
g_ir_scanner
g_ir_compiler
g_ir_generate
Because gobject uses wrappers to call qemu, prepending the sysroot to the paths
of these compilers is necessary.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Prelink-cross emulates a runtime linker for a given sysroot. This is
necessary to allow gobject-introspection to build its typelib files
during cross-compiling.
We're using a sha1 on the cross_prelink branch, as we need the
RTLD-enabled variant of prelink-cross.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- drop HOST_ prefix for inherited variables
- fix licensing info to "or-later"
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
If present, GDB may use a system installed libiberty. As such, we must ensure
that host-libiberty is installed first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Some packages, like prelink-cross, want to use libiberty but do not bundle
their own instance (which is good!).
However, libiberty is made for being bundled in packages: all GNU
packages that use libiberty (gcc, Binutils, gdb, et al...) all have their own
bundled variant. This common practice means that there is no official upstream
for libiberty, the closest being as part of the combined Binutils-gdb tree.
So we introduce a new host-only package, that installs just libiberty from a
Binutils released tarball.
Again, as packages usually bundle libiberty, it usually only installs a static
version. Furthermore, it does not obey the usual --enable-shared and
--disable-static flags; it only ever builds a static version.
Furthermore, -fPIC is not used with this library, but some packages may pick it
to build shared objects. This behavior is the case for host-gdb, for example,
which accidentally picks that library instead of its internal one.
So, rather than fix the various gdb versions and variants we can use, we ensure
that the libiberty we install is usable in shared objects, and we always build
before host-gdb.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- fix DL_SUBDIR for a host-only package
- add licensing info
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a section to the support page for commercial support.
Add Mind, Bootlin and Smile in that section.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The NVD files that are used to build the list of CVEs affecting
Buildroot packages are quite large (a few hundreds MB of json),
and cause the pkg-stats scripts to have a huge memory footprint
(a few GB with Python 2.7).
However, because we only need to iterate on CVE items one by one,
we can process them in streaming (ie decoding one CVE at a time
from the JSON representation). Because the json module from the
python standard library does not support such a mode of operation,
we switch to the third-party package ijson, which is compatible
with both Python 2 and Python3.
To run the script with these modifications, one should install
the ijson python package. This can be done with pip:
`pip install ijson`. On Debian based distributions, this can
also be done with the apt package manager:
`apt install python-ijson`.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d255b67972 fixed the handling of
the a package local m4/ directory which might be missing. But this
only works if it is the very first argument. But for this package this
is not possible because we already occupy this with the extra include
directory for autoconf-archive. Bring back the hook to create the m4/
directory to fix this.
Fixes:
http://autobuild.buildroot.net/results/dc907421a343b8523b14fc9a846e0caf7abe630c/
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Create the staging symlink the same way as the host symlink. This means
using a make dependency rather than recreating it every time.
In coreutils versions below 8.27, re-creation of symbolic links was not
atomic. This means that there is a period in time where the existing link is
removed, before the new one is created. In coreutils 8.27 this was fixed,
see [1]. Note that CentOS 7 ships with coreutils 8.22.
In the following scenario, this is a problem:
- an application is compiled using the sysroot prepared by Buildroot and
links against Xenomai userspace libraries, but its build process is steered
from outside of Buildroot
- to know the correct flags, the application makefile uses the 'xeno-config'
file to request them, and passes DESTDIR=/buildroot/output/staging
- the xeno-config responds with flags based on the path
'/buildroot/output/staging/...'
- while the application build is ongoing, a 'make' happens in Buildroot,
causing the 'staging' symlink to be recreated (even though it already
existed)
- when exactly at this time, the application calls the compiler with -I
flags pointing to output/staging, the build fails with:
-I/buildroot/output/staging/usr/include/xenomai/mercury: Error: ^ is not a directory
-I/buildroot/output/staging/usr/include/xenomai: Error: ^ is not a directory
-I/buildroot/output/staging/usr/include/xenomai/xenomai: Error: ^ is not a directory
-I/buildroot/output/staging/usr/include/xenomai/psos: Error: ^ is not a directory
Failed: ** ^ *
Work around this problem by only creating the staging symlink once, similar
to how the host symlink (if any) is created.
See also commit d0f4f95e39 which changed the
way these symlinks are made. The reasoning in this commit is to move away
from the 'dirs' target.
[1] 376967889e
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
It seems like throughout the series that the CVE pkg-stats support
went through, the support for ignoring CVEs in the per-package
<pkg>_IGNORE_CVES variable was forgotten.
Let's re-introduce this, which is now very simple thanks to the CVE
class, its .identifier() propertly and the .is_cve_ignored() method of
the Package class
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This includes the following changes:
ba952d0 BUG: variable lists not released in close()
690f868 Variables are not removed when loading from file
9e3586a Make sure there's no file descriptor leakage in case of error
03647c4 Check config file defines a non-zero Sector size
3b2d4f1 Check environment size from fw_env.config
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
if test "${mesontimer}"="0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}"="1"; then fdt rm /timer; fi
if test "${nographics}"="1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
if test "${nographics}"="1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
if test "${nographics}"="1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}"="1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
