Fixes the following security issues:
- CVE-2017-8816: NTLM buffer overflow via integer overflow
- CVE-2017-8817: FTP wildcard out of bounds read
- CVE-2017-8818: SSL out of buffer access
For more details, see the changelog:
https://curl.haxx.se/changes.html#7_57_0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Spotted by check-package:
package/ndisc6/ndisc6.mk:14: possible typo: NDISC8_DEPENDENCIES -> *NDISC6*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rauc host tool (used to generate update bundles) runs mksquashfs so
host-squashfs is required for it to work at runtime.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages (ex: skeleton-init-systemd) have a zero size so we cannot
divide by the package size. In that case make their percent zero
explicitly and avoid a ZeroDivisionError exception.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the Buildroot tree is read-only, then cache.txt is copied read-only into
the build directory, and the configuration step fails. Fix this in the
same way we do in other places, by opening permissions as we copy the file
using $(INSTALL).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make WebKitGTK+ honor the value of CMAKE_BUILD_TYPE defined in the CMake
toolchain file by backporting the following upstream WebKit patch:
https://trac.webkit.org/changeset/225168
This reduces the generated binary sizes when building in "Release" mode
(BR2_ENABLE_DEBUG=n), for example when targeting ARMv8 the size reduction
is ~17 MiB.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libbsd is found by the configuration process, mtools unnecessarily
adds a NEEDED field with libbsd to its dynamic section, but it does not
actually use anything from libbsd under Linux. The same may happen to
host-mtools if some libbsd package is installed on the host machine.
Prevent this by forcing configure to bypass the checking for the
existence of a gethostbyname function in libbsd.
I stumbled on this problem when I built host-mtools and later removed
libbsd to upgrade to Fedora 27, due to Bug 1504831[1]. The previously
built host/bin/mtools started to fail due to the missing libbsd.so.0.
1. https://bugzilla.redhat.com/show_bug.cgi?id=1504831
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This helps the toolchains.free-electrons.com build logic re-use
directly the Qemu command lines from this readme.txt file, by having a
-append option similar to the ones used in other readme.txt files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building the target google-breakpad requires building the host variant
of google-breakpad. Just like the target google-breakpad only supports
a limited number of architectures, it is the same for the host
google-breakpad.
We therefore introduce a
BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS option that is used
where necessary to prevent the user from choosing Google Breakpad when
building on unsupported host platforms.
Fixes:
http://autobuild.buildroot.net/results/c7c04483508f9e4d629efa54571afeb1feaa5f73/
(build on a powerpc64le machine)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is invisible because the timings make it excessively difficult to
hit, but the Makefile is inherently flawed for parallel build, as it
contains:
$(objects): atsc_psip_section.c atsc_psip_section.h
atsc_psip_section.c atsc_psip_section.h:
perl section_generate.pl atsc_psip_section.pl
and the perl script section_generate.pl will create both the .c and .h
files in one go, but given the construct above, there can be two such
script that run in parallel, which can clobber the generated .c and/or
.h files.
So, make dvb-apps a MAKE1 package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linphone can optionally use libupnp, so this dependency should be
accounted for in linphone.mk. In addition, linphone is not compatible
with libupnp18, but misdetects it as a a proper libupnp, causing a
build failure.
The build failure with libupnp18 currently only happens on the next
branch (because libupnp18 has only been added there), but adding the
optional dependency on libupnp makes sense for the master branch
anyway.
Fixes:
http://autobuild.buildroot.net/results/473c686f9bc5335d25b720cf1b0c45389138a7b4
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to pdbg that fixes the build on the Blackfin
architecture. The build failure was due to the recently introduced
assembly code to embed the DTB into an object file. This code was not
taking into account the fact that Blackfin has a non-empty
__USER_LABEL_PREFIX__.
The patch has been submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/2bf6f56303453fd2ba7e86882168d406ded4cc80/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of overriding the _svn command and injecting --non-interactive,
change the default value of BR2_SVN to include this flag so the end user
can choose not to use the flag.
This change helps users behind corporate system rules which may not
allow them to locally cache credentials and require interactive mode.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Originally implemented by]
CC: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, wayland support is enabled when the wayland package is
enabled, not when the FreeRDP wayland client is enabled.
But the dependency on libxkbcomon is only enforced from Config.in
when the FreeRDP wayland client is enabled., but is added to build
dependencies when the wayland package is enabled.
As such, we can end up in a situation where the FreeRDP wayland
client is disabled, the wayland package is enabled, and the
libxkbcommon package is also disabled, which casues the build to
fail with:
Makefile:539: *** libxkbcommon is in the dependency chain of
freerdp that has added it to its _DEPENDENCIES variable without
selecting it or depending on it from Config.in. Stop.
Change the build dependency to actually be on the FreeRDP client
being enabled.
Fixes;
http://autobuild.buildroot.net/results/dc3e11f7076a8355f3d2f9cb49c6325dcf7084bd
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'include' directive in GNU make supports wildcards, but their
expansion has no defined sort order (GLOB_NOSORT is passed to glob()).
Usually this doesn't matter. However, there is at least one case where
it does make a difference: toolchain/*/*.mk includes both the
definitions of the external toolchain packages and
pkg-toolchain-external.mk, but pkg-toolchain-external.mk must be
included first.
For predictability, use ordered 'include $(sort $(wildcard ...))'
instead of unordered direct 'include */*.mk' everywhere.
Fixes [1] reported by Petr Vorel:
make: *** No rule to make target 'toolchain-external-custom', needed by '.../build/toolchain-external/.stamp_configured'. Stop.
[1] http://lists.busybox.net/pipermail/buildroot/2017-November/206969.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
[Arnout: also sort the one remaining include, of the external docs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
parted uses libiconv but doesn't link with it. Add a patch to add it
to LIBADD of the library that uses it. iconv was already checked in
configure.ac, but only if i18n is enabled, so the iconv check is also
added unconditionally in configure.ac.
Also add an optional dependency on libiconv, so it is reproducible.
This was not detected in the autobuilders, since it only occurs when
libiconv exists (otherwise uClibc stubs will be used). libiconv
depends on !BR2_ENABLE_LOCALE and parted depends on BR2_USE_WCHAR. We
don't have such a configuration in the autobuilders.
Upstream status: sent to mailing list
http://lists.alioth.debian.org/pipermail/parted-devel/2017-November/005131.html
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Sjoerd Venema <srg.venema@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bundled tinysvcmdns library is affected by CVE-2017-12087 [1]:
> An exploitable heap overflow vulnerability exists in the tinysvcmdns library
> version 2016-07-18. A specially crafted packet can make the library overwrite
> an arbitrary amount of data on the heap with attacker controlled values. An
> attacker needs send a dns packet to trigger this vulnerability.
shairport-sync has incorparated upstreams fixes in [2].
[1] https://bugs.launchpad.net/bugs/cve/2017-12087
[2] 1dbdf94811
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fiber module uses the cpu_relax() macro, for which the MIPS
implementation uses the "pause" instruction, only available since
mips32r2 and mips64r2. In order to avoid build failures on
mips32/mips64, we disallow the selection of the fiber module for such
architecture variants.
This solution was suggested by Arnout Vandecappelle.
Fixes:
http://autobuild.buildroot.net/results/0439790b6f472e3d4b2d5431a05aa5b408f62e56/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 3861ce09d0.
As reported on IRC, runc v1.0.0-rc4 is not compatible with the docker-engine
version we are using, so lets revert for 2017.11:
20:27 < eschu> It looks like 25 days ago buildroot had runc updated to
1.0.0-rc4, which breaks compatibility with the docker-engine
version 17.05. Is there somewhere issues like this are
reported? Or is it just expected on non-release versions of
buildroot?
20:47 < Jacmet> eschu: ahh, so the new runc doesn't work with the old
docker-engine? what kind of errors do you get exactly?
20:49 < eschu> Jacmet: yes, runc made a change from -console to
--console-socket, which results in "Incorrect Usage" error
"flag provided but not defined: -console"
20:51 < eschu> Jacmet: basically docker-engine 17.05 uses -console, but
support for that was cut off in runc around the first 1.0.0
versions. I'll check the patches out, or might just
downgrade to buildroot 2017.08 release
20:51 < agb> Jacmet: unfortunately this issue has hit a number of distributions
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=877146
20:53 < Jacmet> agb: thanks. I'll send a revert for 2017.11 and hopefully
we can make progress on the other docker packages for
2018.02
Cc: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch to fix examples compile without OpenGL support, in
the Qt 5.9 version of qt5declarative.
Fixes [1]:
In file included from fbitem.h:49:0,
from mainwindow.cpp:42:
logo.h:52:11: error: 'GLfloat' does not name a type
const GLfloat *constData() const { return m_data.constData(); }
^
logo.h:57:15: error: 'GLfloat' has not been declared
void quad(GLfloat x1, GLfloat y1, GLfloat x2, GLfloat y2, GLfloat x3, GLfloat y3, GLfloat x4, GLfloat y4);
^
[...]
Makefile:610: recipe for target '.obj/mainwindow.o' failed
make[5]: *** [.obj/mainwindow.o] Error 1
make[5]: Leaving directory '.../build/qt5declarative-5.9.2/examples/quick/quickwidgets/qquickviewcomparison'
Makefile:70: recipe for target 'sub-qquickviewcomparison-make_first' failed
make[4]: *** [sub-qquickviewcomparison-make_first] Error 2
make[4]: *** Waiting for unfinished jobs....
[1] http://autobuild.buildroot.net/results/cef4abbe043f3aaad03c73e07cfab9d24c3d0fc9
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch 'Don't include <xlocale.h>'.
Fixes Bug-10501 ([1]):
In file included from ./include/locale.h:1:0,
from /usr/include/libintl.h:103,
from ./include/libintl.h:2,
from glibc/locale/programs/charmap.c:25:
glibc/locale/locale.h:146:11: fatal error: xlocale.h: No such file or directory
# include <xlocale.h>
[1] https://bugs.busybox.net/show_bug.cgi?id=10501
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
- CVE-2017-14746:
All versions of Samba from 4.0.0 onwards are vulnerable to a use after
free vulnerability, where a malicious SMB1 request can be used to
control the contents of heap memory via a deallocated heap pointer. It
is possible this may be used to compromise the SMB server.
- CVE-2017-15275:
All versions of Samba from 3.6.0 onwards are vulnerable to a heap
memory information leak, where server allocated heap memory may be
returned to the client without being cleared.
There is no known vulnerability associated with this error, but
uncleared heap memory may contain previously used data that may help
an attacker compromise the server via other methods. Uncleared heap
memory may potentially contain password hashes or other high-value
data.
For more details, see the release notes:
https://www.samba.org/samba/history/samba-4.6.11.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since binutils commit 1a9ccd70f9a7 ("Fix the linker so that it will not
silently generate ELF binaries with invalid program headers. Fix readelf
to report such invalid binaries.") the behaviour has changed and
binutils tries to create a program header segment for which there is no
space. Thanks to Nicholas Piggin and his patch to Linux:
https://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux.git/commit/?h=next&id=ff45000fcb56b5b0f
Cedric fixed this in kvm-unit-tests commit 95062c20790d ("powerpc: add
-n to LDFLAGS") so bump to that version.
Since the patch 0001-remove-werror.patch needs to be adjusted, we take
this opportunity to reformat is as a Git patch.
Fixes:
http://autobuild.buildroot.net/results/80825b492abf61313637b109d6a0944b38d5f739
Signed-off-by: Cyril Bur <cyrilbur@gmail.com>
[Thomas: add necessary hash change, refresh patch that was not
applying anymore.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
boot.cmd using dts file instead of dtb which was
added in below commit, so fix the same.
"board: Add Bananapi M1 support"
(sha1: 5f50fb8d1d)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes the following build issue of libfastjson with old
enough compilers (4.8) and wchar disabled:
json_object.c: In function 'fjson_object_object_delete':
json_object.c:385:3: error: 'for' loop initial declarations are only allowed in C99 mode
for (int i = 0 ; i < FJSON_OBJECT_CHLD_PG_SIZE ; ++i) {
^
The code of libfastjson requires C99. If your compiler is recent
enough (gcc 5.x), then no problem, it is C99 by default, no additional
flags are needed.
If your compiler is older (for example gcc 4.8), then -std=c99 or
-std=gnu99 is explicitly needed to tell the compiler to accept C99
constructs. Testing the compiler for the availability of such flags is
done by libfastjson configure script. However, the test program used
by the configure script uses some wchar_t types, and therefore the
test checking for C99 availability fails on toolchains with wchar
disabled. From config.log:
configure:3928: checking for /home/test/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc option to accept ISO C99
[...]
configure:4077: /home/test/buildroot/output/host/usr/bin/i586-buildroot-linux-uclibc-gcc -std=gnu99 -c -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c >&5
conftest.c:54:3: error: unknown type name 'wchar_t'
const wchar_t *name;
^
So, just like we did in libv4l in commit
f01396a158 ("libv4l: fix uclibc-ng
configure/compile"), let's hint directly the configure script that it
should use -std=gnu99. This fixes the build of libfastjson with old
compilers and wchar disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is needed to get the autobuilders to use a toolchain that
includes the fix merged in 9d544feb8a
("fwup: fix for ARC toolchain").
In addition, this new toolchain version also fixes for real the RPATH
issue that should have been fixed by
f90f28a6df, but wasn't done properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 06a4975d4b (qt5: bump LTS version to 5.6.3) added an empty hash
for the 5.6.3 variant of qt5webkit, causing failures.
It also forgot to adjust the download URL as the qt5webkit tarballs are no
longer available under official_releases/ like the other submodules, but only
under community_releases/.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, ssl support is implicitely disabled in the initial configure
options. This overrides the check for openssl below.
libpjsip is also currently only compatible with libopenssl. Change
the check to LIBOPENSSL instead of openssl, and depend on libopenssl.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Contains a number of important fixes. From the relase notes:
https://lists.zx2c4.com/pipermail/wireguard/2017-November/001935.html
* netlink: plug memory leak
* qemu: check for memory leaks
There was a small memory leak on the netlink configuration layer that's now
been fixed.
* netlink: make sure we reserve space for NLMSG_DONE
A rather important change - due to an upstream kernel bug, that's existed
since the advent of netlink itself, sometimes wg(8) failed to receive valid
data back from kernelspace, resulting in "ENOBUFS" when trying to dump all
peers. This patch works around it while we wait for upstream to commit the
fix.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we do a full git clone of the repository, which takes quite
some time, especially on slow networks.
This was done like that because the initial patch was using the official
repository as the source of the download, and that repository did not
offer remotely-generated tarballs.
But now we've switched to using a mirror on github, which does provide
such a tarball, which provides faster downloads.
Use that.
However, the tarball from github differs from the one we were generating
locally, because the paths inside are different. WE used to create a
archive with paths starting with glibc-glibc-2.26-73-g4b692dfb95[...],
while github does away with the git-describe prefix, and generates paths
that start with just glibc-4b692dffb95[...]. The content are exactly
identicall (checked with a diff), though.
Update the hash accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 1e5a8916b2.
The idea was that the version string can be derived because we know the
package name.
However, this patch does not account for the fact that $(pkgname) always
points to the latest pacakge scanned, which in all other situation we're
using it, is the current package, because it is used inside one ot he
xxx-inner macros that are $(eval)ualed. So $(pkgname) is evaluated
"early" and gets the expected value.
However, the github value is not in one of those macros, so it gets
evaluated "late", when doing the actual download. So, by that time,
$(pkgname) will expand to the last package scanned, which is actuall the
manual (without a br2-external tree).
That would require that the _SITE variable be assigned with the :=
assignment operator. This is weird, because that would make it the only
variable to require that, but only when using the github helper, which
is even less obvious and would cause a lot of trouble...
The obvious fixup would seem to be to use $(PKG) instead, because that
already contains the upper-case package name that vcan be used as a
prefix to variables.
However, that does not work either, because we have a check that forbids
a trsailing slash in _SITE, check that is done in pacakge/pkg-generic,
inside the xxx-inner macro, during the $(eval) call.
And at that time, PKG is not yet defined, because it is only defined for
an actual recipe.
So we can't seem to have a workable solution. So, just revert the patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, FreeRDP uses pkg-config to find whether wayland is available.
When it is, it gets the CFLAGS and LDFLAGS and so on from pkg-config,
which is OK.
But I also gets the path to the wayland scanner from pkg-config. And
this points to the target one, when we really need the host one.
So we force-feed the correct path as a configure option.
Furthermore, wayland support needs libxkbcommon, so add this missing
dependency as well.
Fixes:
http://autobuild.buildroot.org/results/bdfe233ade36a56d0f65ef3c3d1698fca548beed/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we only depend on host-pkgconf for gstreamer-0.x
However, we also need it at least for gstreamer-1.x and waylabnd, too.
But since FreeRDP is a cmake package, host-pkgconf is always pulled in
as a dependency by the cmake-package infrastructure.
So, drop the gstreamer-conditional host-pkgconf dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed the following security issues:
CVE-2017-0898: Buffer underrun vulnerability in Kernel.sprintf
CVE-2017-10784: Escape sequence injection vulnerability in the Basic
authentication of WEBrick
CVE-2017-14033: Buffer underrun vulnerability in OpenSSL ASN1 decode
CVE-2017-14064: Heap exposure in generating JSON
For more details, see the release notes:
https://www.ruby-lang.org/en/news/2017/09/14/ruby-2-4-2-released/
Drop now upstreamed rubygems patches and add hashes for the license files
while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING is enabeld,
wpa_supplicant currently fails to build with:
../src/common/sae.o: In function `sae_cn_confirm.isra.2':
sae.c:(.text+0x168): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x198): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ffc':
sae.c:(.text+0x214): undefined reference to `crypto_bignum_to_bin'
sae.c:(.text+0x22c): undefined reference to `crypto_bignum_to_bin'
../src/common/sae.o: In function `sae_cn_confirm_ecc':
sae.c:(.text+0x2a4): undefined reference to `crypto_ec_point_to_bin'
sae.c:(.text+0x2c0): undefined reference to `crypto_ec_point_to_bin'
[...]
This is due to the fact that the SAE code, used for the mesh network
support, needs OpenSSL support. Therefore, we ensure that
BR2_PACKAGE_WPA_SUPPLICANT_MESH_NETWORKING selects OpenSSL. Only
OpenSSL is supported, which is why
BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL is selected as well.
No changes to the .mk files are needed, because we were already
handling OpenSSL as an optional dependency.
This problem was not yet caught by the autobuilders.
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package includes some target-specific code that is irrelevant
in a host package but gets built anyway. The target for this code
must be one of the supported ChromeOS targets.
Supplied Makefile apparently relies on the environment to provide
a valid target, with a simple fallback to host arch. This breaks
the build if no value is provided and the host arch is not among
the supported ones.
Should fix
http://autobuild.buildroot.net/results/d118a83b6c4f7f910d0d44c279f36251d7ba29e8/
and similar failures.
Signed-off-by: Alex Suykov <alex.suykov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All Buildroot pre-built toolchains have been rebuilt with Buildroot
2017.11-rc1, so that they have the latest version of
glibc/musl/uClibc, and also the latest gcc/binutils updates.
Specifically, this will fix the build failures on Blackfin that were
due to the missing accept4() support:
http://autobuild.buildroot.net/results/8b5a72dd7cde685f6f68f46aeee8b1b60c96d559/
(openobex)
http://autobuild.buildroot.net/results/b19dd9ed29944d7f79c6f824669e3baaa0bb045a/
(libiio)
In terms of changes to the toolchains:
- AArch64 glibc toolchain changed to use 4.4 kernel headers instead
of 4.1, in order to increase the variety of kernel header versions
being tested.
- Most configurations now use 4.13 kernel headers instead of 4.12
(except the configurations that were explicitly using an older
kernel headers version)
- The mips64 n64 configuration is changed from using gcc 4.9 to gcc
5, since another ARM configuration already tests gcc 4.9.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the changelong:
Set the FD_CLOEXEC flag on sockets, so they are not "leaked" to
spawned processes
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-12172: Start scripts permit database administrator to modify
root-owned files.
CVE-2017-15098: Memory disclosure in JSON functions.
CVE-2017-15099: INSERT ... ON CONFLICT DO UPDATE fails to enforce SELECT
privileges.
See the announcement for more details:
https://www.postgresql.org/about/news/1801/
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains a minor rendering fix, another for the WebDriver
implementation, and security fixes for CVE-2017-13798, CVE-2017-13788,
and CVE-2017-13803.
Release notes:
https://webkitgtk.org/2017/11/10/webkitgtk2.18.3-released.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go-bootstrap is a host package that builds a first stage Go compiler,
later used to build the final Go compiler. However, this first stage
compiler only supports building on x86, x86-64 and arm as host
architectures, so we need to add the relevant architecture
dependencies to avoid having go-bootstrap built on other unsupported
platforms.
We do this by introducing BR2_PACKAGE_HOST_GO_BOOTSTRAP_ARCH_SUPPORTS
in a new package/go-bootstrap/Config.in.host file. This option is then
used by BR2_PACKAGE_HOST_GO_ARCH_SUPPORTS to make sure we can't enable
Go packages when the host architecture doesn't allow building the Go
compiler.
Fixes:
http://autobuild.buildroot.net/results/cbd419c6ab6fa8a6d18dc137c91f895867e53b8a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The prosody configure script defines CFLAGS as -fPIC -Wall, but
because we pass our own CFLAGS, the -fPIC goes away, causing a build
failure when building shared libraries on x86-64:
/home/test/autobuild/run/instance-0/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-amd-linux-gnu/6.2.0/../../../../x86_64-amd-linux-gnu/bin/ld: encodings.o: relocation R_X86_64_32 against `.rodata' can not be used when making a shared object; recompile with -fPIC
So let's pass this -fPIC flag explicitly in CFLAGS. We don't bother
passing it conditionally !BR2_STATIC_LIBS because other packages (e.g
lua) also pass -fPIC unconditionally.
Fixes:
http://autobuild.buildroot.net/results/7f0eb285b75cdeacb21a1f9a9f64d2f0cbbf1d59/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent crypto handling change (commit 04a1031d3: package/libssh2: Add
selectable crypto libraries) had the unfortunate side effect that it no
longer automatically selects the most suitable crypto backend (E.G. one
where the dependency is already enabled), so all users not wanting to use
the mbedtls backend need to explicitly configure this.
Fix this by inverting the logic so the crypto backend sub options use
'depends on' their dependencies instead of 'select', so only the available
backends are displayed.
Like before, default to openssl if no crypto backend dependencies are
currently enabled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc doesn't implement __register_atfork() on noMMU systems, causing
a build failure of libressl. Since openssl is available as an
alternative on such platforms, we just disable libressl on
uClibc/noMMU systems.
Fixes:
/home/thomas/projets/buildroot/output/build/libressl-2.5.5/crypto/.libs/libcrypto.a(arc4random.o): In function `_rs_init.part.1':
arc4random.c:(.text+0x74): undefined reference to `__register_atfork'
collect2: error: ld returned 1 exit status
This build issue is not visible in the autobuilders, because libressl
is only selectable through a choice, which isn't randomized by the
autobuilder logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to 4.13.11 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ethtool has a configure script option allowing the enabling or disabling of
pretty printing for drivers, SFP modules etc which can save a significant
amount of bytes on the root filesystem. Allow selecting that, and turn it on by
default (like ethtool's configure script).
[Peter: fix Config.in indentation/style]
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/49d/49dcec0bd2f3bb78c18675a9fa5c9c53cc183fd2/
g_cclosure_marshal_VOID__VOID is defined both in libgobject.a and
libgstreamer.a. It is probably possible to fix this, but gstreamer0.10
has been deprecated for a long time now and is anyway unlikely to be
used in static-only situations, so let's just require dynamic linking.
Propagate to the reverse dependencies. opencv3 already did depend on
dynamic libs.
[Peter: add autobuild reference]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We use the host compiler for x86-64 builds, so ensure it is only available
on x86-64 hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update kernel to 4.13 and U-Boot to 2017.09.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/106/106af20196089e74c35daabdae46f030981600bd/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Passing extra jimtcl configure flags is unfortunately not forseen in the
usb_modeswitch Makefile, so add a small patch making this possible.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d13/d137680bf1c0ebfacef635cb2f0fc14524759143/
Otherwise the (handwritten) configure script uses a config.guess script from
2010 to figure out the build host, breaking builds on ppc64le hosts.
The result of --host / --build is only used to detect if we are building for
Windows or not, which is why things are working on x86(-64) build hosts
without specifying --host even though we are cross compiling - But this may
change in the future, so we better pass the correct values.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://github.com/libimobiledevice/libplist/blob/master/NEWS
This version bump fixes
* CVE-2017-6440
* CVE-2017-6439
* CVE-2017-6438
* CVE-2017-6437
* CVE-2017-6436
* CVE-2017-6435
* CVE-2017-5836
* CVE-2017-5835
* CVE-2017-5834
* CVE-2017-5545
* CVE-2017-5209
... and several others that didn't receive any CVE (yet).
The dependency to libxml2 was removed.
Autoreconf is not needed anymore, the upstream tarball includes a
configure script.
[Peter: also drop host-pkgconf dependency, only used for cython]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove --enable-abstract-sockets; dropped upstream. Remove
ac_cv_have_abstract_sockets that is dropped as well.
Remove --disable-selinux; we handle selinux as an optional dependency
below.
Remove --{enable,disable}-dnotify; this options has been removed in
version 1.7.6, broken since 2010.
Remove --with-init-scripts; dropped upstream.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel module git revision to make it work with Linux v4.13.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When multiple hooks are registred, both pre-a and post-command hooks'
foreach loops need to have a separator at the end in order for the
code to work as intended. Without the separator all hooks end up as a
one single line command thus making all but the first hook into
no-ops.
Fixes: 4628b6f3b4 ("fs: add pre- and post-command hooks")
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -m32 compiler flag is used for 32bit builds and the host tools have
limited architecture support. It may work in some situations (e.g.
on aarch64 host when building a 64-bit target), but it's equally likely
that it breaks and those situations are not tested. So just limit to
x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: explain that it may work in some situations]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The -m32 compiler flag is used for 32bit builds and host-luajit has
limited architecture support. Building for a 32-bit target on a 32-bit
host should always work, but we haven't tested that and it's very
unlikely that someone needs it. So just limit to x86(-64) hosts.
Fixes:
http://autobuild.buildroot.net/results/5f5b5edb058efe976c003678e21bcc28a87cc828/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Arnout: clarify that it might work on 32-bit hosts for a 32-bit target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
ti-gfx is provided as a x86 self extracting executable, so it is only
available on x86(-64) hosts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since version 3.0.0 protobuf is compatible with Python3, remove
Python2-only dependency.
It depends on python-six now, add this missing dependency.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When prefix is set to a path like /usr during crossbuild
the sed operations end up executing twice, once for the prefix
reassignment and another for includedir if it is set as a string
including the ${prefix} variable. This results in an issue
when the build directory is under /usr.
This patch updates the remaining location which uses the prefix
variable to also sed and update to use the real path.
Upstream bug report:
https://bugs.python.org/issue31713
Buildroot bug:
https://bugs.busybox.net/show_bug.cgi?id=10361
Fixes failures like the following:
dbus-python-1.2.4 | NOK | http://autobuild.buildroot.net/results/758858efa97b6273c1b470513f5492258a6d8853
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: refer to autobuild failures that still exist]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
SOURCE_DATE_EPOCH is currently forcibly set (to either the git commit
date, or the last release date).
However, the spec mandates that it should not be modified if already
set: https://reproducible-builds.org/specs/source-date-epoch/
Build systems MUST NOT overwrite this variable for child
processes to consume if it is already present.
Abide by the rule, and only set it if not already set.
This will allow users to pass it from an upper-layer buildsystem (e.g. a
jenkins or gitlab-ci job, for example), when they have a reson to do so.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Reported-by: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Einar Jón Gunnarsson <tolvupostur@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the selection of the backend is based on a priority order,
which is not always desirable: not all features are available for all
backends, as reported upstream:
https://github.com/libssh2/libssh2/issues/213
In that particular case, the problem is that libgcrypt is unable to
read encrypted certificates created with openssl, but it is likely
that other incompatibilities exist as well.
As such, allow a user to select the backend most appropriate to their
use-case.
Note that this changes the defaults: previously, if openssl was already
selected and we additionally select libssh2, openssl would be used as
a backend. Now, mbedtls is the default so if the user doesn't change
it, mbedtls will be used.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: remove now-unneeded comment in .mk file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: add license hash, fix Config.in, correct license as pointed out by
Yegor]
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-luajit has limited architecture support, and moarvm does not need
anything luajit specific - So use host-lua instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono to version 5.4.0.201 and monolite
to version 1050400003.
It also removes a patch not needed anymore.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rfkill program has been incorporated to the util-linux package.
The new implementation is based upon, and backward compatible with, the
original rfkill from Johannes Berg and Marcel Holtmann.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add systemd start-up configuration for dhcpcd that is executed after
the network has been brought up.
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many Buildroot users can not read Dutch. Although there is an English
version of this page, the github page looks more suitable as a link for
the software package itself, and the readme.md file is pretty
informative.
Cc: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 49a9fb0f13 removed the
BR2_PACKAGE_OPENOBEX_BLUEZ option, because BlueZ support is now
unconditionally included in OpenOBEX. Therefore, selecting this legacy
option no longer makes sense, and in fact triggers the legacy handling
for no reason.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas: tweak commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Back in commit a662ff7e79
("package/argp-standalone: Fix build with c99 compilers"), we fixed
the build of argp-standalone with compilers defaulting to C99 inline
semantics, i.e starting from gcc 5.x.
This was done as part of a patch that used "inline" instead of "extern
inline". However, using "inline" once again broke the build with gcc
7.x. To fix this, revert back to using just "extern inline" (hence
removing a patch of patch 0003-fix_build_with_c99_compilers.patch) and
instead use -fgnu89-inline in the CFLAGS.
See https://gcc.gnu.org/gcc-5/porting_to.html for more details.
Fixes:
http://autobuild.buildroot.net/results/a9cedc54829b7bd2dd7ae6ff2bd6c6db242f1c35/
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: also drop the patch of
0003-fix_build_with_c99_compilers.patch that is no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update libssh2 to use the newest version from git. This caused a
transition from released version number to hash as it has not been
version rev'd in over a year (see issue
https://github.com/libssh2/libssh2/issues/220 for bump request).
This brings in changes to the autoconf to correctly pick the crypto
library.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the advisory:
http://www.openwall.com/lists/oss-security/2017/10/30/4
It was discovered that the bgpd daemon in the Quagga routing suite does
not properly calculate the length of multi-segment AS_PATH UPDATE
messages, causing bgpd to drop a session and potentially resulting in
loss of network connectivity.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix CVE-2016-2779: runuser in util-linux allows local users to escape to
the parent session via a crafted TIOCSTI ioctl call, which pushes
characters to the terminal's input buffer.
The new experimental "su --pty" feature has been implemented to fix this
issue. The feature is not enabled by default and the new command line
option --pty is necessary.
Add rfkill, a command for enabling and disabling wireless devices. This
implementation is based upon, and backward compatible with, the original
rfkill from Johannes Berg and Marcel Holtmann, currently provided by the
standalone "rfkill" package.
Add uuidparse, a command to analyze and print information about UUID's.
The "reset" script is not part of utill-linux anymore. Add a legacy
config telling the user to use either BusyBox or the ncurses program.
Drop the ncursesw patch, allready applied upstream. AUTORECONF is not
required anymore.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug fix release:
- correctly handle signal interrupts when polling in gpiod_simple_event_loop()
- fix the linking order when building with static libraries
- pass the correct consumer string to gpiod_simple_get_value_multiple() in
gpioget
- fix a line test case: don't use open-drain or open-source flags for input
mode
- fix the flags passed to ar in order to supress a build warning
- set the last error code in gpiod_chip_open_by_label() to ENOENT if a chip
can't be found
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
swupdate 2017.07 has a bug which makes hash verification faulty.
The commit adds a patch to fix the issue. The fix has already been
pushed to upstream and is a copy of the commit
dba95dcd3739c604a81ffa2df2545e7a4cd430cf in the swupdate repo [1].
[1] https://github.com/sbabic/swupdate
Signed-off-by: Maksim Salau <msalau@iotecha.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of the cryptodev-linux version used in Buildroot is currently
broken for kernels >= 4.13. A fix was pushed upstream:
f0d69774af
This patch bumps the cryptodev-linux package version to use the latest
available one, which includes the commit fixing the build for recent
kernels.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The basic lvm2 package (libdevmapper / dmsetup) does build under musl, only the
standard (full) installation doesn't.
Many setups only need the basic package, so move the !musl dependencies down
to the sub options and adjust the reverse dependencies (cryptsetup/dmraid)
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: adjust Config.in comments and dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds 5_6_3 to the Timeline patch that fixed the build with
Qt 5.6.2.
Signed-off-by: Scott Ellis <scott@jumpnowtek.com>
[Thomas: adjust patch existing patch description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Open-source software for volunteer computing and grid computing.
Use the idle time on your computer to cure diseases, study global
warming, discover pulsars, and do many other types of scientific
research.
https://boinc.berkeley.edu
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Bernd:
- bumped to version 7.8.3
- removed patches which where applied upstream
- added myself to DEVELOPERS as well]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream socat2 branch seems to be dead. Last commit is from January
2016 . Over the last few years socat2 received only fixes cherry picked
from the master 1.x branch. Most major general purpose distros only
package socat 1.x.
Drop the threads dependency; not needed for 1.x.
Mention the OpenSSL exception in the license. Add hashes for license
files.
Correct the autoconf comment. The tarball configure script is recent
enough. But since we patch configure.in and Makefile.in we still need to
autoconf.
All patches we carry for socat2 are also needed for socat 1.x.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc upstream has ruled against doing regular point-releases, but they
do have a lot of interesting and important fixes for regressions and
security.
Backporting each patch, or cherry-picking individual patches is off
limits for us, so we just switch to using the currently-latest HEAD of
the maintenance branch instead.
The version number is obtained with:
$ git describe --match 'glibc-*' --abbrev=40 origin/release/2.26/master
The alternative options were:
- download the tarball from the git tree
--> does not work; not an option
- download the 2.26 tarball, and bundle the individual patches in
Buildroot
--> maintenance of patches is a burden; not an option
- download the 2.26 tarball, maintain the list of patches to download from
the git tree
--> not an option for the same reason
So we end up just doing a git clone. The git tree is today about ten
times the size of the tarball, so a rough estimate makes it at about ten
times the download time.
Also upstream doesn't officially provide an https download location [1].
There is one but it's not reliable, sometimes the connection time out and
end-up with a corrupted git repo:
fatal: unable to access 'https://sourceware.org/git/glibc.git/': Failed to connect to sourceware.org port 443: Connection timed out
So switch to using a git mirror from github which is updated once a day [2].
This allow at the same time to clone the git repository faster.
Note: The glibc 2.26 patches are not kept for the arc toolchain since they
are fixing an issue with the new float128 support introduced in x86, x86_64
and powerpc64le.
[1] https://sourceware.org/git/?p=glibc.git;a=summary
[2] https://github.com/bminor/glibc.git
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
[Romain: bump 4b692dffb95ac4812b161eb6a16113d7e824982e]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[yann.morin.1998@free.fr: update comment to never decide on the mirror]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reorganize so the optional composer option for the qt5wayland package shows up
as an indented option.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-13089: The http.c:skip_short_body() function is called in some
circumstances, such as when processing redirects. When the response is sent
chunked, the chunk parser uses strtol() to read each chunk's length, but
doesn't check that the chunk length is a non-negative number. The code then
tries to skip the chunk in pieces of 512 bytes by using the MIN() macro, but
ends up passing the negative chunk length to connect.c:fd_read(). As
fd_read() takes an int argument, the high 32 bits of the chunk length are
discarded, leaving fd_read() with a completely attacker controlled length
argument.
CVE-2017-13090: The retr.c:fd_read_body() function is called when processing
OK responses. When the response is sent chunked, the chunk parser uses
strtol() to read each chunk's length, but doesn't check that the chunk
length is a non-negative number. The code then tries to read the chunk in
pieces of 8192 bytes by using the MIN() macro, but ends up passing the
negative chunk length to retr.c:fd_read(). As fd_read() takes an int
argument, the high 32 bits of the chunk length are discarded, leaving
fd_read() with a completely attacker controlled length argument. The
attacker can corrupt malloc metadata after the allocated buffer.
Drop now upstreamed patch and change to .tar.lz as .tar.xz is no longer
available.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes; mostly for crashes and rendering issues, plus
one important fix for the layout or Arabic text.
Release notes:
https://webkitgtk.org/2017/10/27/webkitgtk2.18.2-released.html
Even though an acconpanying security advisory has not been published
for this release, the release contains fixes for several crashes (one
of them for the decoder of the very common GIF image format), which
arguably can be considered potential security issues.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-15906 - The process_open function in sftp-server.c in OpenSSH
before 7.6 does not properly prevent write operations in readonly mode,
which allows attackers to create zero-length files.
For more details, see the release notes:
https://www.openssh.com/txt/release-7.6
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.2.11 fixes important issues. From the release notes:
================================================================================
Redis 3.2.11 Released Thu Sep 21 15:47:53 CEST 2017
================================================================================
Upgrade urgency HIGH: Potentially critical bugs fixed.
AOF flush on SHUTDOWN did not cared to really write the AOF buffers
(not in the kernel but in the Redis process memory) to disk before exiting.
Calling SHUTDOWN during traffic resulted into not every operation to be
persisted on disk.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-2888 - An exploitable integer overflow vulnerability exists
when creating a new RGB Surface in SDL 2.0.5. A specially crafted file can
cause an integer overflow resulting in too little memory being allocated
which can lead to a buffer overflow and potential code execution. An
attacker can provide a specially crafted image file to trigger this
vulnerability.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d59/d5992dcc9a49ee77afaebdcc9448ac1868fa7de1/http://autobuild.buildroot.net/results/e89/e894f21ce1983ee3bd8d65a8e59e1adab9a62707/
The configure script automatically enables support for the raspberry pi
video backend if it detects the rpi-userland package. Unfortunately it
hardcodes a number of include/linker paths unsuitable for cross compilation,
breaking the build:
if test x$enable_video = xyes -a x$enable_video_rpi = xyes; then
..
RPI_CFLAGS="-I/opt/vc/include -I/opt/vc/include/interface/vcos/pthreads -I/opt/vc/include/interface/vmcs_host/linux"
RPI_LDFLAGS="-L/opt/vc/lib -lbcm_host"
fi
So explicitly disable it until the configure script is fixed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-14919 - In zlib v1.2.9, a change was made that causes an
error to be raised when a raw deflate stream is initialized with windowBits
set to 8. On some versions this crashes Node and you cannot recover from
it, while on some versions it throws an exception. Node.js will now
gracefully set windowBits to 9 replicating the legacy behavior to avoid a
DOS vector.
For more details, see the announcement:
https://nodejs.org/en/blog/vulnerability/oct-2017-dos/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <<a href="mailto:peter@korsgaard.com">peter@korsgaard.com</a>><br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
(a) When installing themes with unterminated colour formatting
sequences, Irssi may access data beyond the end of the
string. (CWE-126) Found by Hanno Böck.
CVE-2017-15228 was assigned to this issue.
(b) While waiting for the channel synchronisation, Irssi may
incorrectly fail to remove destroyed channels from the query list,
resulting in use after free conditions when updating the state
later on. Found by Joseph Bisch. (CWE-416 caused by CWE-672)
CVE-2017-15227 was assigned to this issue.
(c) Certain incorrectly formatted DCC CTCP messages could cause NULL
pointer dereference. Found by Joseph Bisch. This is a separate,
but similar issue to CVE-2017-9468. (CWE-690)
CVE-2017-15721 was assigned to this issue.
(d) Overlong nicks or targets may result in a NULL pointer dereference
while splitting the message. Found by Joseph Bisch. (CWE-690)
CVE-2017-15723 was assigned to this issue.
(e) In certain cases Irssi may fail to verify that a Safe channel ID
is long enough, causing reads beyond the end of the string. Found
by Joseph Bisch. (CWE-126)
CVE-2017-15722 was assigned to this issue.
For more details, see the advisory:
https://irssi.org/security/irssi_sa_2017_10.txt
While we're at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing just the endianness flag to LD is not enough. We need to pass
the right emulation flag which will set everything for us, not only the
endianness.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The tool hciattach_bcm43xx defines the default firmware path in `/etc/firmware`,
but the Broadcom firmware blobs are usually stored in `/lib/firmware`.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2017-13685: The dump_callback function in SQLite 3.20.0 allows
remote attackers to cause a denial of service (EXC_BAD_ACCESS and
application crash) via a crafted file.
CVE-2017-15286: SQLite 3.20.1 has a NULL pointer dereference in
tableColumnList in shell.c
because it fails to consider certain cases where
`sqlite3_step(pStmt)==SQLITE_ROW` is false and a data structure is never
initialized.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/57d/57d9f0ea27e5c8ba73002bd1d0b33027f27a3779/http://autobuild.buildroot.net/results/7c3/7c3133e822c997879fe00923ba0ad7903656c2e1/
bootstrap by default runs ./tools/build/src/engine/build.sh --guess-toolset
to detect what toolchain (compiler variant). On x86 this returns gcc, but
on the ppc64le gcc112 autobuilder this returns xlcpp causing bootstrap.sh to
get confused and bail out:
./bootstrap.sh ..
Building Boost.Build engine with toolset ... tools/build/src/engine/###
\### No toolset specified. Please use --toolset option.
\###
\### Known toolsets are: acc, borland, cc, como, clang, darwin, gcc, gcc-nocygwin, intel-darwin, intel-linux, intel-win32, kcc, kylix, metrowerks, mipspro, msvc, qcc, pathscale, pgi, sun, sunpro, tru64cxx, vacpp, xlcpp, vc7, vc8, vc9, vc10, vc11, vc12, vc14, vc141, vmsdecc
\###/b2
Fix it by explicitly specifying the gcc toolset mode to bootstrap, similar
to how it was already done for the bjam invocations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some documentation about running the pc defconfigs in qemu.
In particular, document the use of the -bios parameter to use the OVMF
firmware to test the UEFI image.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simplifies the pc configs and respective post image scripts to use
the shared genimage script and separate grub config files.
Separate grub files are cleaner to maintain and easier to copy and
modify, for example to support booting the pc defconfigs in qemu.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Starting with version 7, gcc automatically recognises and enforces the
environment variable SOURCE_DATE_EPOCH, and fakes __DATE__ and __TIME__
accordingly, to produce reproducible builds (at least in regards to date
and time).
However, older gcc versions do not offer this feature.
So, we use our toolchain wrapper to force-feed __DATE__ and __TIME__ as
macros, which will take precedence over those that gcc may compute
itself. We compute them according to the specs:
https://reproducible-builds.org/specs/source-date-epoch/https://gcc.gnu.org/onlinedocs/cpp/Standard-Predefined-Macros.html
Since we define macros otherwise internal to gcc, we have to tell it not
to warn about that. The -Wno-builtin-macro-redefined flag was introduced
in gcc-4.4.0. Therefore, we make BR2_REPRODUCIBLE depend on GCC >= 4.4.
gcc-7 will ignore SOURCE_DATE_EPOCH when __DATE__ and __TIME__ are
user-defined. Anyway, this is of no consequence: whether __DATE__ and
__TIME__ or SOURCE_DATE_EPOCH takes precedence, it would yield the
exact same end result since we use the same logic to compute it. Note
that we didn't copy the code for it from gcc so using the same logic
doesn't imply that we're inheriting GPL-3.0.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
[Arnout: rewrite commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Python 3.x on MIPS with musl fails because the libffi code
uses a "#ifdef linux" test to decide if we're building on Linux or
not. When building with -std=c99, "linux" is not defined, so instead
of including <asm/sgidefs.h>, libffi's code tries to include
<sgidefs.h>, which doesn't exist on musl.
The right fix is to use __linux__, which is POSIX compliant, and
therefore defined even when -std=c99 is used.
Note that glibc and uClibc were not affected because they do provide a
<sgidefs.h> header in addition to the <asm/sgidefs.h> one.
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[Thomas: reformat patch with Git, add a better commit log and description.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That way packages included in that list like ccache will also be
regarded as a normal packages for targets like external-deps,
show-targets or legal-info
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, HOSTCC and HOSTCXX are set to their _NOCACHE variants in the
'dependencies' target. This is needed because at that time, ccache is
not built yet - host-ccache is one of the dependencies. However, because
this override is only specified for the 'dependencies' target (and
thereby gets inherited by its dependencies), the override is only
applied when the package is reached through the 'dependencies' target.
This is not the case when one of DEPENDENCIES_HOST_PREREQ is built
directly from the command line, e.g. when doing 'make host-ccache'. So
in that case, ccache will be built with ccache... which fails of
course.
To fix this, directly apply the override to the DEPENCIES_HOST_PREREQ
targets.
Note that this only fixes the issue for 'make host-ccache', NOT for
e.g. 'make host-ccache-configure'.
Signed-off-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
[Arnout: improve commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2017-9410: fill_buffer_resample function in libmp3lame/util.c heap-based
buffer over-read and ap
CVE-2017-9411: fill_buffer_resample function in libmp3lame/util.c invalid
memory read and application crash
CVE-2017-9412: unpack_read_samples function in frontend/get_audio.c invalid
memory read and application crash
Drop patches now upstream or no longer needed:
0001-configure.patch: Upstream as mentioned in patch description
0002-gtk1-ac-directives.patch: Upstream as mentioned in patch
description/release notes:
Resurrect Owen Taylor's code dated from 97-11-3 to properly deal with GTK1.
This was transplanted back from aclocal.m4 with a patch provided by Andres
Mejia. This change makes it easy to regenerate autotools' files with a simple
invocation of autoconf -vfi.
0003-msse.patch: Not needed as -march <x86-variant-with-msse-support>
nowadays implies -msse.
With these removed, autoreconf is no longer needed.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
that allows optional dependencies
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas:
- use "luainterpreter" instead of "lua" in the dependencies
- replace with a Git formatted patch that doesn't comment code but
removes it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/ffc/ffc9c10c55c2838ab7002c5ec35244e9bfe46189/
Commit dfa1817d31 (openldap: supports only the real OpenSSL, not LibreSSL)
tried to ensure openldap would only use openssl, but changed the wrong
variable. OPENLDAP_TLS is passed to configure, so it shouldn't be changed:
./configure --target=aarch64-buildroot-linux-gnu .. --with-tls=libopenssl ..
Configuring OpenLDAP 2.4.45-Release ...
checking build system type... x86_64-pc-linux-gnu
checking host system type... aarch64-buildroot-linux-gnu
checking target system type... aarch64-buildroot-linux-gnu
checking for a BSD-compatible install... /usr/bin/install -c
checking whether build environment is sane... yes
checking for gawk... gawk
checking whether make sets $(MAKE)... yes
checking for aarch64-buildroot-linux-gnu-strip... /usr/lfs/v0/rc-buildroot-test/scripts/instance-0/output/host/bin/aarch64-linux-gnu-strip
checking configure arguments... configure: error: bad value libopenssl for --with-tls
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vivante GPU could be a part of SoC along with any CPU architecture
thus get rid of nonsense dependency.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the upstream announcement:
http://www.openwall.com/lists/oss-security/2017/10/19/5
Felix Wilhelm has discovered a flaw in the dns response parsing for
musl libc 1.1.16 that leads to overflow of a stack-based buffer.
Earlier versions are also affected.
When an application makes a request via getaddrinfo for both IPv4 and
IPv6 results (AF_UNSPEC), an attacker who controls or can spoof the
nameservers configured in resolv.conf can reply to both the A and AAAA
queries with A results. Since A records are smaller than AAAA records,
it's possible to fit more addresses than the precomputed bound, and a
buffer overflow occurs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous version was by mistake mixed up with the patch 'gst-plugins-bad:
openjpeg: Remove compatibility with openjpeg 2.0'
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes a bug with the BR2_TOOLCHAIN_HAS_THREADS variable
handling which causes CGO_ENABLED to be always 0.
Furthermore, it fixes the cross compilation options for the go
compiler: setting CGO_ENABLED should be done only for the target
compiler not the host one.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Christian Stewart <christian@paral.in>
If selected use:
- system/buildroot harfbuzz in case __sync for 4 bytes is supported
- qt harfbuzz otherwise (using QAtomic instead)
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The gpu_mem option is not using the proper option argument which causes sed to
fail.
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
+ case "${arg}" in
+ gpu_mem=ome/gportay/output-rpi3-qtwe/images
+ sed -e '/^ome/gportay/output-rpi3-qtwe/images=/s,=.*,=ome/gportay/output-rpi3-qtwe/images,' -i /home/gportay/output-rpi3-qtwe/images/rpi-firmware/config.txt
sed: -e expression #1, char 8: extra characters after command
The issue comes from the use of $1 instead of $arg to extract the gpu_mem
value. $1 is the $(BINARIES_DIR) which leads to a sed expression error.
Also, it adds the error flag to the shell script to prevent from such situation
and terminate the build in error.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is just a bug-fix release.
Removing 0003-BUG-Ensure-_npy_scaled_cexp-f-l-is-defined-when-need.patch
as it is a part of the release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At this point, libressl can be added to the openssl virtual package.
- Remove the entry package/libressl/Config.in from package/Config.in
- Remove the file: package/libressl/Config.in
- Add libressl entry to package/openssl/Config.in
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wpa_supplicant will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libevent will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openldap will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
opusfile will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mosquitto will not build with LibreSSL without patches, so let's
support only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
hostapd will not build with LibreSSL without patches, so let's support
only OpenSSL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
softether tries to use SSLv3 functionality as a fallback. LibreSSL
doesn't support SSLv3 anymore. Two main issues prevent a patch:
- Trying to wrap the sslv3 functionality from the source with a guard
clause results in linking errors after compiling is done.
- There are multiple security vulnerabilities with using sslv3.
- There are multiple security issues in github pertaining to using
sslv3.
- This project seems to not be updated very often, and the security
issues are being ignored it seems.
For people who still want to use softether, they will have to use
libopenssl.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
heirloom-mailx has two small issues when compiling against LibreSSL:
- RAND_egd is used (LibreSSL does not support RAND_egd)
Solution: "Guard" the code calling RAND_egd
- SSLv3_client_method function is used (LibreSSL does not support SSLv3)
Solution: "Guard" the code with #ifndef OPENSSL_NO_SSL3
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages that use openssl are not compatible with libressl, only
with the real openssl (known as libopenssl in Buildroot). So before we
add libressl as a provider for the openssl virtual package, we
introduce a BR2_PACKAGE_OPENSSL_FORCE_LIBOPENSSL hidden option that
packages incompatible with LibreSSL will be able to select.
This will allow packages that need OpenSSL to continue using "select",
without having to change to using "depends on" dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To ease the transition to having both OpenSSL and LibreSSL, there has to be
a new virtual package introduced to handle both.
Instead of making a libssl, and adding OpenSSL and libressl to that package,
it will be far easier to move openssl to libopenssl and to make OpenSSL
a virtual package. This offers a few advantages:
- BR2_PACKAGE_OPENSSL is still a visible symbol with no dependencies.
- It does not require a huge patch to convert every instance of
OpenSSL -> libssl)
- Users will be able to update without ever having to select anything new.
- LibreSSL can be added at a later date to the virtual package.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: define BR2_PACKAGE_PROVIDES_HOST_OPENSSL to the value
"host-libopenssl" as we always want to use the original OpenSSL for
the host variant.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linux 4.0 kernel doesn't build with gcc 6.x, which is used since
the toolchain update in commit
193dfffa83 ("support/testing: use more
recent toolchains"). So let's update to Linux 4.11 instead (like the
existing Qemu x86 defconfig does), and update the kernel configuration
file accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The LINUX_KCONFIG_FIXUP_CMDS are meant to deselect any compression
option that are not selected in the buildroot configuration. But it only
deselects the last one in the list instead of all of them because it
overwrites the LINUX_COMPRESSION_OPT_ variable instead of appending to
it. Only the last option set to that variable gets deselected.
This produces the warning:
.config:2216:warning: override: KERNEL_GZIP changes choice state
is emitted when buildroot runs olddefconfig when buildroot configures a
kernel with a custom config that has a different kernel compression
option set to what is configured in buildroot.
Accumulate all the deselected compression options instead of overwriting
them to ensure all non-selected options get deselected..
Signed-off-by: Cam Hutchison <camh@xdna.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the hard disk crash of autobuild.b.o, we lost old toolchains, so
use the latest toolchains, which have been restored.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl has a bug in that <sched.h> defines CPU_ZERO(), which uses
memset(), but it doesn't have the prototype for it. This has been
fixed by upstream musl but until we rebuild our toolchains, let's have
a patch for Boost that works around this problem. We will of course
remove this patch once musl is updated to 1.1.17 and our toolchains
have been rebuilt.
Fixes:
http://autobuild.buildroot.net/results/6884cff634367cb640940051a60e5e13f30f70a2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 95c15aaf15. It was
mistakenly pushed, and causes problems because it installs the shared
library to staging, but not to target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curl support is strongly recommended for multiplayer game.
The build system warn when curl is disabled:
cURL is required to load the server list
cURL is required to announce to the server list
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default pppd built by buildroot writes the list of nameservers to
/etc/resolv.conf instead of /etc/ppp/resolv.conf
This is not the default behavior of pppd and breaks name resolution
if several network interfaces are used. The change makes this optional
and enabled by default, to be backward compatible and to add a possibility
to turn this behavior off, if required.
Signed-off-by: Maksim Salau <msalau@iotecha.com>
[Arnout: extend the help text to explain that it won't work on readonly
rootfs]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Remove patches that has been merged/updated upstream
0001-fix-building-shared-libs.patch:
CmakeLists packages are rewritten.
0002-add-support-for-tz-package:
dd93fd2b3d
0003-add-missing-define.patch:
656b3be02d
0004-ffmpeg30.patch:
b7b66968f9
Also add sha256sum for license file.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The coroutine2 functionality is now provided only through headers, the
compiled library has disappeared. Due to that passing "coroutine2" as
argument to --without-libraries. Hence, the
BR2_PACKAGE_BOOST_COROUTINE2 option is removed by this commit.
We don't need Config.in.legacy handling, because coroutine2 support is
now unconditionally available in boost.
While at it, add LICENSE_1_0.txt sha256sum to boost.hash.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop Config.in.legacy handling, reword commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains bugfixes (many of them related to rendering, plus one
important fix for touch input) and many security fixes.
Release notes:
https://webkitgtk.org/2017/10/18/webkitgtk2.18.1-released.html
Fixes CVE-2017-7081, CVE-2017-7087, CVE-2017-7089, CVE-2017-7090,
CVE-2017-7091, CVE-2017-7092, CVE-2017-7093, CVE-2017-7094,
CVE-2017-7095, CVE-2017-7096, CVE-2017-7098, CVE-2017-7099,
CVE-2017-7100, CVE-2017-7102, CVE-2017-7104, CVE-2017-7107,
CVE-2017-7109, CVE-2017-7111, CVE-2017-7117, CVE-2017-7120,
CVE-2017-7142:
https://webkitgtk.org/security/WSA-2017-0008.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directory package/sepolgen/ was removed in commit 9d6da7a26
(policycoreutils: split packages and bump to 2.7), but two
entries were left in the DEVELOPERS file.
This causes the following warnings when running util/get-developers:
WARNING: 'package/sepolgen/' doesn't match any file
WARNING: 'package/sepolgen/' doesn't match any file
Remove the erroneous entries.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
configure: WARNING: unable to find required header jpeglib.h
configure: WARNING: unable to find required library jpeg
configure: error: some required prerequisites were not found
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default for is set to BR2_OPTIMIZE_S, the help comment designated
BR2_OPTIMIZE_0 as default.
Changed the help comment to show that BR2_OPTIMIZE_S is the default.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Policycoreutils was broken up into several packages, as such several
changes needed to happen for this patch to work:
- Remove patches 3, 4, and 5 as they no longer apply.
- Refresh patches 1 and 2 to work with version 2.7
- Remove semodule_${deps,expand,link,package} and sestatus from the makedirs
in the mk file.
- Remove restorecond from the make and config file. (Seperate package)
- Remove Audit2allow from the make and config file. (In a different package)
- Remove the package sepolgen
- Add the package selinux-python
- Add the package restorecond
- Add the package semodule-utils
- Add the relevant Config.in.legacy options into the menu.
Because these are utilities that work on top of python, the older versions of
these utilites still work, and as such this should be a single patch.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The reason for combining these patches is because the
old version of setools is not compatible iwth libsepol 2.7. If a user where
to do a git pull on a patch that only updates libsepol or setools, the build
would fail to compile.
setools has been completely rewritten in python instead of C.
The current version of setools includes a few programs that require
python-qt5 or python-networkx to run, however the package does not
check to see if these exist when compiling, and will install the scripts
to the target directory even if they don't exist.
In the case of python-networkx, this package is not available on Buildroot.
The scripts that require them are: sedta and seinfoflow.
In the case of python-qt5, qpol is the script that requires it.
Some setools.mk notes to get the package to compile:
- Convert the package .mk to use python-package instead of autotools-package.
- setup.py hard codes base_lib_dirs to point to several host directories.
To fix this, sed is used before compiling to point the base_lib_dirs to
the staging directory.
- setup.py also includes the "Werror" flag, however compilers before gcc6
cause a few autogenerated variables to not be initialized before use,
causing the build to fail.
To fix this, a patch is provided that removes the Werror flag.
- Remove sedta and seinfoflow from the target system after install. These
packages rely on the package python-networkx which is not available in
buildroot.
- Remove the installed apol package and the setoolsgui directory from the
target directory if python-qt5 is not selected.
Other changes:
- Removed all patches, as they are not compatible with the new version of
setools.
- Add COPYING, COPYING.GPL, and COPYING.LGPL to setools.hash
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-Remove-incorrect-dependency-from-install-data-hook.patch is
patching Makefile.am, so we need to autoreconf. If we don't do this,
we get build failures such as:
configure.ac:3: error: version mismatch. This is Automake 1.15.1,
configure.ac:3: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:3: comes from Automake 1.15. You should recreate
configure.ac:3: aclocal.m4 with aclocal and run automake again.
WARNING: 'automake-1.15' is probably too old.
You should only need it if you modified 'Makefile.am' or
'configure.ac' or m4 files included by 'configure.ac'.
Fixes:
http://autobuild.buildroot.net/results/440c9edd34d56d9207b9f1ee326a14a1c757b27d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
----
Changes v2 --> v3:
- use 'Hashes for license files:' instead of repeated
'Hash for license file' (suggested by Thomas Petazzoni)
Changes v2:
- add reviewed-by and minor commit title change (removed package prefix)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0002-disable-tests.patch modifies Makefile.am, so we have to
autoreconf. It hasn't been seen until now, but becomes very clear
since the bump of automake to 1.15.1, as we're seeing build failures
such as:
configure.ac:66: error: version mismatch. This is Automake 1.15.1,
configure.ac:66: but the definition used by this AM_INIT_AUTOMAKE
configure.ac:66: comes from Automake 1.15. You should recreate
configure.ac:66: aclocal.m4 with aclocal and run automake again.
Fixes:
http://autobuild.buildroot.net/results/3402357d8e90f1866dfeaee7bb61119d80dc8bcb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-7805 - Martin Thomson discovered that nss, the Mozilla
Network Security Service library, is prone to a use-after-free vulnerability
in the TLS 1.2 implementation when handshake hashes are generated. A remote
attacker can take advantage of this flaw to cause an application using the
nss library to crash, resulting in a denial of service, or potentially to
execute arbitrary code.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the kernel to version 4.13.5 and U-Boot to 2017.09.
While at it, remove the custom scripts for generating the SD card image
and use the standard scripts instead.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ifupdown-scripts has some .empty files to maintain empty directories
in git. Previously this package used to be part of the skeleton which
used SYSTEM_RSYNC to copy the directories to the target. When it was
split into a separate package, cp -a was used to do the copy instead,
which copies the .empty files.
Change to SYSTEM_RSYNC which excludes .empty files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As stated by the upstream developers, Prosody only supports
lua-5.1 or luajit (which is a lua-5.1 interpreter):
> Response from zash at zash.se:
>
>> I pegged the package to lua 5,1 based on the contents of the
>> INSTALL file. Is this a hard requirement?
>
> Up until Prosody 0.9 Lua 5.1 is required. However LuaJIT
> implements Lua 5.1 so it works.
The license terms are not very consistent: the source files all
state to be "MIT/X11 licensed" and defer to the COPYING file for
details, but that file only has the text for the MIT license.
Thus, we believe the license to be MIT/X11, as stated in the source
files.
This installs the base system with certificates for two domains:
localhost and example.com
The default runtime configuration is tweaked during installation
to properly setup logging and pid-file directories.
Prosody doesn't like being executed as root, and thus the daemon
is executed as the user prosody. The startup script creates the
pid file write location with appropriate permissions.
Signed-off-by: Dushara Jayasinghe <nidujay@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The WITH_PTHREADS_PF option was errantly categorized as a Windows only option.
WITH_PTHREADS_PF actually enables a parallelization framework that utilizes
pthreads to optimize some inner for loops of different OpenCV operations. This
optimization is available on any platform that has pthreads.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "virt" machine supports disk emulation, so use a ext4 rootfs instead of
initramfs for consistency with the other qemu defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The license file got reformatted as reStructuredText, but the license itself
didn't change.
Drop unneeded md5sum and add license hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the target and host flex packages do not behave the same in
terms of patching: the target variant has a patch hook that disables
building the programs (because they are not needed, and do not build
on no-MMU platforms). However, this hook is obviously not executed for
host-flex, because we really want the host flex binary to be built.
In preparation for the introduction of out-of-tree package build, it
is important that we don't do different things in the patch hooks for
the target and host variant of a given package, because the source
tree will be shared between the target and host builds.
To solve this, we introduce a --disable-program configure option,
through a patch to the flex configure.ac and Makefile.am. This patch
makes the current 0001-flex-disable-documentation.patch no longer
needed.
Furthermore, building the documentation is a PITA: flex.1 depends on
configure.ac and a few other files generated during the build. Touching
flex.1 does not work, because automake will forcibly remove the files
when its prerequisites are too old, so pre-requisites of flex.1 will
always be more recent than flex.1. So, we add a patch that adds a
--disable-doc configure option.
Fixes:
http://autobuild.buildroot.org/results/f70/f70b39632535bb9692d0a032166b2f4104532967/http://autobuild.buildroot.org/results/525/52567afdfe7992b3518de0e01227ba14aa300f21/
[...]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- rebase on-top of master,
- add patch to not build the documentation, because simply touching
flex.1 is no longer enough.
- keep install in target/, for shared builds
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Adrian Perez de Castro <aperez@igalia.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream wiringpi apparently has some issues with their release
process: their 2.42 and 2.44 tags point to the exact same commit. And
at the 2.44 tag, the VERSION file was not updated to indicate that
it's version 2.44.
A follow-up commit added support for the RPi Zero-W, and fixed the
VERSION file to contain 2.44. So let's use this follow-up commit as
the new version for wiringpi.
This will hopefully clarify things, and avoid confusion such as the
one reported in bug #10391 [1].
[1] https://bugs.busybox.net/show_bug.cgi?id=10391
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: rewrite commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Neon is compulsory on AArch64, and BR2_ARM_CPU_HAS_NEON is false on
AArch64. Therefore, this change is needed to enable building VC4
gallium driver for Rpi3 using AArch64.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update Linuxptp to the latest version from 1. September 2017
This update brings bugfixes and minor enhancements.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the download directory, when specified with the -d option, is
only used to store the files downloaded by the testing infra, not those
downloaded by Buildroot.
So, we end up with this situation:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(TOP_DIR)/dl
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(BR2_DL_DIR)
This is not very consistent.
We change the behaviour so that the value of -d always takes precedence,
and is used by Buildroot as well, giving this new behaviour:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Finally there's working ARC port of glibc thanks to Vineet and Cuper!
This port is based on pretty recent glibc's master branch and ARC
changes are being reviewed now in glibc's mailing list.
Thus we again have to use sources from our GitHub but as soon as there's
a glibc release with our patches applied we'll switch to upstream releases
and will drop our glibc GitHub repo alltogether.
Note now we cut tags in glibc repo simultaneously with tags
in Binutils and GCC repos and so to make sure everything works in the best
way we plan to update glibc tag together with Binutils and GCC.
Also note as of today ARCompact (AKA ARCv1 ISA) is not supported in glibc
but we plan to fix it soonish so for now we make glibc intentionally
dependent on archs38.
Also note we are not creating directory "2.26" because all patches for glibc
ver 2.26 applies to arc glibc port.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
CC: Alexey Brodkin <abrodkin@synopsys.com>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CC: Waldemar Brodkorb <wbx@openadk.org>
CC: Romain Naour <romain.naour@gmail.com>
Cc: Cupertino Miranda <cmiranda@synopsys.com>
Cc: Vineet Gupta <vgupta@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mainline kernel is able to decode video via the coda driver.
Add support for it and also add some explanation on how VPU decoding
can be tested with Gstreamer.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-13720 - Check for end of string in PatternMatch
CVE-2017-13722 - pcfGetProperties: Check string boundaries
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit d1011f89a1 (audit: update legal info) set the libraries license
to "unclear" because of GPL license text in a few libraries source
files. Upstream audit package commit 239765162fa494 (Correct the
licensing description in lib/ and auparse/ to be LGPL as was always
intended) clarified the license in these files.
Add license files hashes.
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
start-stop-daemon fails on -R when not compiled with
CONFIG_FEATURE_START_STOP_DAEMON_FANCY. Thus, do not rely on -R
during stop to avoid a race condition during restart.
Use a sleep 1 during restart instead, as suggested by Peter Korsgaard
in <87bmluk4bm.fsf@dell.be.48ers.dk>.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package doesn't actually rely on the msgpack runtime libraries, it's a
pure python implementation.
Signed-off-by: bradford barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Modern versions of msgpack are hosted on Github. Msgpack switched
their build systems from autotools to cmake a while back. The licence
was also updated from Apache to Boost.
Signed-off-by: bradford barr <bradford@density.io>
[Thomas: drop custom install commands, add LICENSE_1_0.txt to license
files.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is based on the bcg729 library from Belledonne Communica-
tions which is wrapped into a freeswitch module to provide a native
G729.A codec.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps ARC toolchain to arc-2017.09-rc1.
The arc-2017.09 series is built on top of upstream GCC 7.1.1 and
Binutils 2.29 so please expect all kinds of breakages related to GCC
7.x as we saw earlier with the move from 4.8 to 6.x :)
Note patches for both GCC and Binutils were updated with
copies from corresponding mainline versions, i.e.
"package/gcc/7.2.0" and "package/binutils/2.29".
Please note that it is a release candidate and it might contain some
breakages, please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: drop binutils patch related to the Blackfin architecture.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Introduce imx6-sabreauto_defconfig that uses mainline U-Boot and
mainline kernel.
As mainline U-Boot supports SPL, it is possible to boot the same
sdcard.img in the three mx6sabreauto variants: imx6q, imx6dl and imx6qp.
Also update the readme.txt file to explain how to build an image for
mx6sabreauto boards using mainline U-Boot and kernel.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Thomas: regenerate gitlab-ci.yml file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the explanation of the need for using the performance governor.
This problem is specific to mx6sabresd board and the Egalax touchscreen
running a mainline kernel, so make this clear.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
parted uses libiconv but doesn't link with it. All the checks are there
in configure, but the Makefile.am doesn't add it to the link. Add a
patch to fix this.
Also add an optional dependency on libiconv, so it is reproducible.
While we're at it, regenerate the existing patches on top of v3.2, and
make patch 0003 a properly git formatted one.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: srg.venema@gmail.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I got this error when attempting to build:
aclocal: error: couldn't open directory 'm4': No such file or directory
So we now have the post patch hook to ensure the m4 directory is
present.
In addition, the package now sets a variable with the Git SHA1 so that
the binary contains the expected output for --version.
Specific configurations of uClibc cause a build failure in pdbg. This commit
adds a patch to remove the definition of the offending macro (it is unused in
the source).
In file included from usr/include/stdio.h:71:0,
from libpdbg/fake.c:17:
include/bits/uClibc_stdio.h:149:16: error: expected identifier or ‘(’ before ‘;’ token
void *__unused; /* Placeholder for codeset binding. */
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Python3 support was added to libiio in version 0.10.
This commit adds the option to compile libiio bindings if python3 was
selected instead of python.
Signed-off-by: Béla Becker <bela.becker@pcbdesign.hu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 95cb1465f0 added the
atmel_sama5d27_som1_ek_mmc_dev_defconfig but forgot to update
.gitlab-ci.yml. Update it now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The parts of the readme.txt that specify the board-specific aspects
(DTB files, KMS config json file) were a bit confusing. For the DTB
files this is solved by putting the board it applies to after the DTB
file name. For the json files, this is solved by adding an extra line,
so the CinematicExperience-demo is clearly separated from the setting
of QT_QPA_EGLFS_KMS_CONFIG.
Also remove the 'for all boards' line in the beginning, it doesn't add
any value.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 12 Kit.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch add support for Open Frame C.TOUCH 10.1 Kit.
Since the defconfig is no longer only for the starter kit, remove that
from BR2_TARGET_GENERIC_ISSUE.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
musl provides its own SYS_getrandom definition, but not GRND_NONBLOCK.
This breaks the build with kernel headers older than v3.17. Add a patch
adding a local definition of GRND_NONBLOCK to fix the build.
The following defconfig reproduces the build failure:
BR2_x86_pentium_mmx=y
BR2_TOOLCHAIN_BUILDROOT_MUSL=y
BR2_KERNEL_HEADERS_3_12=y
BR2_PACKAGE_LIBRESSL=y
The getentropy_linux.c file is in upstream tarball, but not in its git
repository. It originates from OpenBSD. For this reason the patch is
against the tarball, but not git formatted.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: change filename to correspond to how git creates it]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This upstream patch fixes the build error produced by building for
powerpc 32bit after the glibc bump to 2.26 with the following internal
toolchain config.
gcc5.4.0
glibc2.26
bin2.28.1
linux4.1.43
Failure log:
CC net/proto-ipv4.o
net/proto-ipv4.c: In function ‘ip_setsockopt’:
net/proto-ipv4.c:231:49: error: ‘UIO_MAXIOV’ undeclared (first use in this function); did you mean ‘_IO_MAGIC’?
so->optlen = rnd() % sizeof(unsigned long)*(2*UIO_MAXIOV+512);
^~~~~~~~~~
_IO_MAGIC
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: add Matthew's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the remaining code style warnings from flake8:
- properly indent continuation lines;
- use proper code to test a parameter is not None.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix the trivial warnings from flake8:
- remove modules imported but unused;
- use 2 lines before class or module level method;
- remove blank line at end of file.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Change all defconfig fragments to take advantage of
"cf3cd4388a support/tests: allow properly indented config fragment".
Make each defconfig fragment:
- start after a backslash;
- be declared as a multi-line string literal;
- be indented one level more than the variable that contains it.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Move the strip out of leading spaces in defconfig fragments from the
BRTest class to the Builder class. It actually postpones the strip out,
consequentially allowing test cases to post-process the defconfig in
their own __init__ before calling the __init__ method from BRTest.
Moving this code to the Builder class also allows any new test class
that inherits from BRTest to reuse the same code even if the new class
overrides the setUp method.
At same time, prepend a newline to the jlevel handling otherwise it
would stop working for defconfig fragments that don't end in a newline.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot nowadays also uses kconfig, so we can handle config fragments like we
do for barebox/busybox/linux.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
And add hashes for the license files while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix for CVE-2017-9798 is included in this release, so this patch is
removed.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Update commit log: not a security bump]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump at91sam9x5ek, atmel_sama5d2_xplained, atmel_sama5d3_xplained and
atmel_sama5d4_xplained all variants to linux4sam_5.7. The 3 foundation
components have their tags changed (AT91Bootstrap, U-Boot, Linux kernel).
Signed-off-by: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependency is actually only for the kernel module (and thus on the
runtime kernel version rather than kernel headers), but as we don't know the
runtime version in kconfig and the user space part doesn't make much sense
without the kernel module this will have to do.
[Peter: extend commit message, add comment to Config.in as suggested by
Arnout, fix off-by-one in comment text]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is only for the device-mapper library, so a user selectable
Config.in.host option isn't needed.
[Peter: add host-pkgconf dependency as pointed out by Arnout]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues and adds a number of other bigfixes:
2.8.1: Changelog:
https://lists.gnu.org/archive/html/qemu-devel/2017-03/msg06332.html
CVE-2017-2615 - display: cirrus: oob access while doing bitblt copy backward
mode
CVE-2017-2620 - display: cirrus: out-of-bounds access issue while in
cirrus_bitblt_cputovideo
CVE-2017-2630 - nbd: oob stack write in client routine drop_sync
2.8.1.1 Changelog:
https://lists.gnu.org/archive/html/qemu-devel/2017-04/msg03460.html
CVE-2017-7471 - 9p: virtfs allows guest to change filesystem attributes on
host
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.net/results/8e6/8e639ab8912e7d884fd8e6dbb1ca8b49451dd766/
/home/test/autobuild/run/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x54): undefined reference to `inflate'
/home/test/autobuild/run/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_compress_block':
c_zlib.c:(.text+0xd4): undefined reference to `deflate'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
./configure: --disable-uuid is obsolete, UUID support is always built
Change-Id: I9e278418d19e15bbbd3ea233658cd62f75e3385c
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building Qt with QtWebKit on configuration step there is
a check which disables QtWebKit build with GCC 6+.
Back in the day nobody thought about building Qt with GCC
version greater than 5.x. And now with modern GCCs like
6.x and 7.x this assumption gets in the way.
Given in Buildroot today we don't have GCC older than 4.9
it should be safe to remove now meaningless check completely
by adding patch to qt.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, bridge-utils wants to grap the headers from the linux-headers
package, so we point it directly there, as has been the case since we
first added bridge-utils in 2003 (c8eea31d3f), and then further refined
in 2005 (178a317d26) which is the first moment we pointed to the linux-
headers directory.
However, ther are two things wrong with that.
First, the headers are not directly in $(LINUX_HEADERS_DIR). Instead,
they are in a sub-directory thereof. So, we could not have found them
the way we are doing now.
Second, this definitely does not work when using an external toolchain,
because there is not linux-headers package enabled then.
Yet, against all odds, bridge-utils has valiantly deflected all rocks
thrown its way, day-in day-out building without any issue in every
autobuilders it's been confronted with. Good boy, good boy. :-)
And indeed, it turns out that the required headers are easily found from
within the sysroot of the toolchain. Wonders! :-)
But there's still a gotcha: the default search path is still a hard
coded path pointing to the installed kernel source tree on the host.
So, we still have to pass this option, but we can simply point to the
sysroot.
[Peter: point to sysroot instead of non-existing directory]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Glibc bump to 2.26 exposed this missing header when building with the
following combination using an i386 internal toolchain:
gcc5.4.0
bin2.28.1
linux4.1.43
Logfile snippet:
2017-10-02T00:08:11 ^
2017-10-02T00:08:12 rpc.c: In function ‘nsm_recv_getport’:
2017-10-02T00:08:12 rpc.c:469:13: error: ‘UINT16_MAX’ undeclared (first use in this function)
Upstream: https://bugzilla.linux-nfs.org/show_bug.cgi?id=312
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The COPYING file is part of the xf86-input-tslib project's source tree.
Let's include the hash for it's current version.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those cores are not supported in upstream gcc, not even in master.
The only toolchain that supported those core was the 2014R1 ADI
rebuilt toolchain, but we removed it in 311bc13 (toolchain: kill
ADI Blackfin toolchain) because there was too many issues with it.
ADI has not released any newer toolchain since then.
There is little hope for those cores now, so remove them.
Support for those cores has been useless and unusable for a while
without nobody noticing, therefore we intentionally skip adding
Config.in.legacy. This would require keeping code in
arch/Config.in.bfin since the options being removed are inside a
choice...endchoice block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: explain why we don't add the options to Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream gcc does not have support for C-Sky, and we do not have a
vendor tree for it either (yet?).
Use the newly-introduced symbol to state so, rather than have the
exclusion in the toolchain choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some architectures or specific cores do not have support in upstream
gcc. Currently, they are individually listed as exclusions in the
toolchain choice.
This poses a maintainance burden, as the knowledge about what gcc
version supports what architecture is split across many places: the
toolchain choice, the gcc version choice, the external toolchains.
As a first step, add a blind option that architectures or individual
cores may select to indicate they lack support in our internal backend.
Actual use of the option will come in followup patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since tslib's COPYING file in part of the source tree, we can easily
include it's hash for the given version here.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop direct sed'ing of config.h for HAVE_CONNTRACK, HAVE_LUASCRIPT, and
HAVE_DBUS. Use MAKE_OPTS COPTS parameters instead, like we do already
for all other options.
Rename DNSMASQ_ENABLE_LUA to DNSMASQ_TWEAK_LIBLUA since it now does only
that.
Merge two conntrack and three dbus conditional sections.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Supported Lua version is now 5.2.
Add licenses hash.
Fixes a number of security issues:
CVE-2017-13704 - Crash when DNS query exceeded 512 bytes (a regression
in 2.77, so technically not fixed by this bump)
CVE-2017-14491 - Heap overflow in DNS code
CVE-2017-14492 - Heap overflow in IPv6 router advertisement code
CVE-2017-14493 - Stack overflow in DHCPv6 code
CVE-2017-14494 - Information leak in DHCPv6
CVE-2017-14496 - Invalid boundary checks allows a malicious DNS queries
to trigger DoS
CVE-2017-14495 - Out-of-memory Dos vulnerability
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the extraction commands entirely remove the urg directory,
which means the downloaded stamp will get removed, and thus a subsequent
build would try to re-download it.
It turns out that the directory extracted by urg is already correctly
named, so we just need to extract out of the build directory. This
highly simplifies the command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit eec04a7b7d.
The original commit bumped the package to a version which is at runtime
incompatible with Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, it was working by luck. Buildroot has fixed its definition
of HOST_DIR and pkg-autotools.mk uses the classical /usr prefix. So,
fix this sed expression to correctly replace $(HOST_DIR) by /usr in ERL
path.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed,so update the entry accordingly.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the conversion to SPL the imx6sabresd defconfig targets have
been renamed, so update their entries accordingly.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We explicitly remove pkg-config files from target in the target-finalize
step, and our pkg-config looks for .pc files from staging, not target.
So, explicitly installing the .pc in target is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the host uses glibc 2.26 or newer, Flex will try to use the
newly-introduced reallocarray() function, but as it would not define
_GNU_SOURCE a segmentation fault would occur later on due to the
compiler assumming that the function is implicitly defined.
This issue manifests itself due to a crash of "stage1flex" during the
Flex bootstrap:
./stage1flex -o stage1scan.c ./scan.l
make[2]: *** [Makefile:1725: stage1scan.c] Segmentation fault (core dumped)
This imports the patch from the upstream Git repository, and adds flags
in the .mk file to rebuild the Autotools scripts and support files. Due
to the latter, the patch to disable the documentation is changed so it
modifies the .am file instead.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- Add Adrian's Sob and upstream ref to new patch;
- Keep patch 1 as patch 1;
- Keep Vicente as author of path 1;
- Add reason for autoreconf in a comment.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This doesn't compile with glibc 2.26 where reallocarray() as been introduced.
It's a nasty issue, when reallocarray() is available for the target, flex will
build a small tool called stage1flex for the host (using _FOR_BUILD) but with
the config.h generated for the target.
When the host doesn't have a glibc >= 2.26, reallocarray() is never defined
while building stage1flex:
misc.c:147:8: warning : implicit declaration of function « reallocarray »
[-Wimplicit-function-declaration]
mem = reallocarray(NULL, (size_t) size, element_size);
^~~~~~~~~~~~
misc.c:147:6: warning : assignment makes pointer from integer without a cast
[-Wint-conversion]
mem = reallocarray(NULL, (size_t) size, element_size);
^
Disable reallocarray for now, reallocarray() support may be
enabled in a followup patch.
Fixes:
stage1flex-misc.o: In function `allocate_array':
misc.c:(.text+0x38f): undefined reference to `reallocarray'
stage1flex-misc.o: In function `reallocate_array':
misc.c:(.text+0xc8a): undefined reference to `reallocarray'
collect2: error: ld returned 1 exit status
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since glibc >= 2.26, don't try to use getopt_long replacement bundled
with diffutils. It will conflict with the one from glibc.
The getopt copy bundled in glibc has been updated with the one from gnulib.
After a lot of warnings...
Fixes:
xstrtol-error.c: In function 'xstrtol_error':
xstrtol-error.c:84:26: error: invalid use of undefined type 'struct rpl_option'
option = long_options[opt_idx].name;
^
xstrtol-error.c:84:26: error: dereferencing pointer to incomplete type 'const struct rpl_option'
[...]
xstrtol-error.c:92:1: error: conflicting types for 'xstrtol_fatal'
xstrtol_fatal (enum strtol_error err,
^~~~~~~~~~~~~
In file included from xstrtol-error.c:20:0:
xstrtol.h:69:16: note: previous declaration of 'xstrtol_fatal' was here
_Noreturn void xstrtol_fatal (enum strtol_error,
^~~~~~~~~~~~~
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
float128 is now required on powerpc64le with glibc >= 2.26 toolchains.
Fixes:
running configure fragment for sysdeps/gnu
running configure fragment for sysdeps/powerpc/powerpc64le
checking if [...]powerpc64le-buildroot-linux-gnu-gcc supports binary128 floating point type... no
checking if the target machine is at least POWER8... yes
configure: error: *** binary128 floating point type (GCC >= 6.2) is required on powerpc64le.
In order to prepare the glibc bump to this version, we enable
binary128 floating point in gcc. This require at least gcc >= 6.2.
Disable gcc 4.x and 5.x for internal toolchain.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc: In function ‘int __sanitizer::TracerThread(void*)’:
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc:241:22: error: aggregate ‘sigaltstack handler_stack’ has incomplete type and cannot be defined
struct sigaltstack handler_stack;
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc: In function ‘int __sanitizer::TracerThread(void*)’:
../../../../libsanitizer/sanitizer_common/sanitizer_stoptheworld_linux_libcdep.cc:276:22: error: aggregate ‘sigaltstack handler_stack’ has incomplete type and cannot be defined
struct sigaltstack handler_stack;
^~~~~~~~~~~~~
The fix is already included in gcc 7.2 release [1]. We have to backport it to
all older gcc release since it's not included in any stable release yet.
[1] https://gcc.gnu.org/git/?p=gcc.git;a=commit;h=72edc2c02f8b4768ad660f46a1c7e2400c0a8e06
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Default prefix is set to `BR2_` but may be overidden by setting
BR2_PREFIX.
Example usage:
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --enable GNUPG
Check state of config option `BR2_PACKAGE_GNUPG`:
./utils/config --package --state GNUPG
y
Enable `BR2_PACKAGE_GNUPG`:
./utils/config --package --disable GNUPG
Set `BR2_TARGET_GENERIC_ISSUE` to "Welcome":
./utils/config --set-str TARGET_GENERIC_ISSUE "Welcome"
Copied from the Linux kernel (4.13-rc6) source code and adapted to
Buildroot.
Thanks to Andi Kleen who is the original author of this script.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
[Arnout: merge the two tr invications]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The amount of GPU memory can be set using the new option --gpu_mem_XXX
(where XXX is the total amount of memory available on the board).
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Use the maintainer's repository, update the package description, based
on the official one, and drop an obsolete patch.
Change-Id: I2170aa4c1cc57de2a25ef04e89a216b254f2a859
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an entry to explain how to run the glmark benchmark.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump the kernel version to 4.13.3.
Kernel 4.13.3 uses the /dev/dri/card0 device as rendering node, so
adjust it accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.09 uses SPL, so bump to this version so that we can
have a single qt5 image that supports the different imx6 sabresd
boards: imx6q, imx6dl and imx6qp.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The QT5 rootfs requires more space, so adjust it a larger size.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that SPL is supported a single image can run on the different
variants of imx6 sabresd boards: imx6q, imx6dl and imx6qp.
So drop the 'quad' prefix from defconfig, directory and readme file
to make it generic.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The host menuselect tool is linked to our host libxml2 library, but it
is missing an RPATH to the host directory.
This is because menuselect does not use automake, so does not inherit
the LDFLAGS from the configure run.
We fix that by simply passing $(HOST_CONFIGURE_OPTS) in the make
environment.
At the same time, we also install the tool in the host directory, even
if not used from there, so that the sanity checks we run are properly
passed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We sanity-check the host executables that they have a correct RPATH
pointing to the host libraries.
This is currently done by looking for all files in $(HOST_DIR) that
match the 'ELF executable' pattern (a bit more complex, but that's
idea).
However, when an executable is built with -fPIE of -fpie, it no longer
appears to be an 'ELF executable', but it rather looks like an 'ELF
sheard object' (like if it were an library.
So, we miss those files.
It turns out that the problem is a real one, because quite a few
mainline distros, expecially those based on Debian for example, have
already switched to generating PIE code by default, and thus we miss on
a whole class of systems..
We fix that by simply looking if we can find an ELF interpreter in each
file. If we there is one, this is an ELF executable; if not, it may be
anything else: we don't care (not even about ELF libraries).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix package/nginx/S50nginx:
* On stop, use start-stop-daemon -R 1 to wait for the nginx processes
to actually stop. This fixes a race condition with restart, where
nginx fails to restart because start is called too early
w.r.t. stop. (This only works with Debian's start-stop-daemon,
however BusyBox's start-stop-daemon does not fail when given -R; it
just ignores the argument silently).
* Implement reload with an actual reload instead of a restart.
* Add force-reload.
Signed-off-by: Thomas Claveirole <thomas.claveirole@green-communications.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Bump U-Boot to 2017.09 version and kernel to 4.13.3.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Pass an offset of 1MB for the start of the rootfs.
Otherwise we get rootfs corruption when the bootloader is manually
written to the SD card.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This is similar to the ppc64_pseries config, except we build for little
endian instead of big endian.
The default architecture is set to Power8 as this was the first fully
enabled LE machine.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version was not tagged upstream so use a git hash which has that
version.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switch from github hash to an official release.
Several upstream patches are required to build the code correctly
on all platforms supported by buildroot.
The test application now uses fork().
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
[Arnout: Squash the two patches, MMU dependency was introduced with the
version bump.
Wrap assignments in libkcapi.mk differently.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
U-Boot 2017.07 has switched to SPL boot, which allows the same binary to
boot on imx6dl, imx6q and imx6qp sabresd boards.
Switch to the SPL mechanism.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Sysklogd had only SYSV init scripts. Add systemd service files to start
klogd and syslogd.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The symlink to /etc/systemd/system/syslog.service was pointing 4 levels up
to /usr/lib instead of 3 levels up.
This wasn't an issue on the actual system (/../ equals to / ) but was causing a
deadlink in the TARGET directory.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Dependency to json-c was dropped, updated reverse dependencies as well
and added optional dependency to libatomic_ops
https://cgit.freedesktop.org/pulseaudio/pulseaudio/tree/configure.ac#n250
when __sync_bool_compare_and_swap is not available.
Removed patch applied upstream:
0002-webrtc-C-11-is-only-required-for-WebRTC-support.patch
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
LIBC is really only used to construct the target tuple. To check if we
are using a uClibc toolchain, we use BR2_TOOLCHAIN_USES_UCLIBC.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When building bash statically, configure does not initialize the
SHOBJ_STATUS variable. The SHOBJ_STATUS make variable in
examples/loadables/Makefile.in must resolve to either 'supported' or
'unsupported'. Otherwise, the install-$(SHOBJ_STATUS) target does not
exist.
This leads to the following build failure:
make[2]: Entering directory '.../output/build/bash-4.4/examples/loadables'
make[2]: *** No rule to make target 'install-', needed by 'install'. Stop.
make[2]: Leaving directory '.../output/build/bash-4.4/examples/loadables'
Makefile:793: recipe for target 'install' failed
with the following defconfig:
BR2_arm=y
BR2_STATIC_LIBS=y
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_BASH=y
Note that this doesn't terminate the build so it's not detected as an
error by the autobuilders.
Set SHOBJ_STATUS in the configure environment as a workaround.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Package switched to cmake without providing most of the autoconf
options previously available. Therefore we move all suboptions to
Config.in.legacy.
All patches are removed, the files to be patched do not exist anymore.
OPENOBEX_EXTRACT_CMDS is not needed anymore, upstream provides the
source as .tar.gz now.
Version 1.6 added support for libusb-1.x and udev. The current version
also supports bluez5_utils, not only bluez_utils.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: add help text to legacy options]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Includes some fixes for the Raspberry Pi, amongst many others.
Signed-off-by: Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reiterate once more that <packagename>_PATCH variable can point
to an arbitrary URL, not just to a path relative to <packagename>_SITE.
While we're at it, also explain that the patch should be added to the
.hash file.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
[Arnout: add sentence about .hash file.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
configure.ac use PKG_CHECK_MODULES macro to find some libraries dependencies.
So add host-pkgconf in LVM2_DEPENDENCIES.
Fixes:
checking pkg-config is at least version 0.9.0... ./configure: line 9875: [...]/host/bin/pkg-config: No such file or directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix libglu build error
CXXLD libGLU.la
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lXext
/home/buildroot/br4/output/host/lib/gcc/i586-buildroot-linux-gnu/6.4.0/../../../../i586-buildroot-linux-gnu/bin/ld: cannot find -lX11
collect2: error: ld returned 1 exit status
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
The nvidia binary blob is linked to libX11.so & libEext.so
$ output/host/bin/i586-buildroot-linux-gnu-readelf -a output/target/usr/lib/libGL.so | grep NEEDED
0x00000001 (NEEDED) Shared library: [libnvidia-tls.so.381.09]
0x00000001 (NEEDED) Shared library: [libnvidia-glcore.so.381.09]
0x00000001 (NEEDED) Shared library: [libX11.so.6]
0x00000001 (NEEDED) Shared library: [libXext.so.6]
0x00000001 (NEEDED) Shared library: [libc.so.6]
0x00000001 (NEEDED) Shared library: [libdl.so.2]
which is also reflected by Libs-section of package/nvidia-driver/gl.pc.
To allow other packages linking to libGL.so provided by this package we
need to reflect the fact that xlib_libX11 & xlib_libXext are not
runtime-only dependencies.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fix build error
>>> libglu 9.0.0 Autoreconfiguring
configure.ac:50: error: Could not locate the pkg-config autoconf macros.
These are usually located in /usr/share/aclocal/pkg.m4. If your macros
are in a different location, try setting the environment variable
ACLOCAL="aclocal -I/other/macro/dir" before running autoreconf.
configure.ac:50: the top level
autom4te: /home/buildroot/br4/output/host/bin/m4 failed with exit status: 1
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_NVIDIA_DRIVER=y
BR2_PACKAGE_LIBGLU=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Version 2.18.x includes support for remotely controlling WebKitGTK+
based browsers using the standard WebDriver API. Typically this is used
by Web developers, and in most cases it will be desirable to disable it
from builds.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Release notes:
https://webkitgtk.org/2017/09/11/webkitgtk2.18.0-released.html
No corresponding WebKit Security Advisory (WSA) has been published.
All patches have been applied upstream.
This also bumps the required target GCC version, due to the WebKit code
now using more modern C++ features which were introduced in version
5.x of the compiler.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout:
- propagate dependency to midori;
- mention in commit message why patches were removed.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
While currently there is no in-tree Buildroot package which depends on
host-python-six, it can be needed to build external packages.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Tested-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently it is always required to add package version as an argument to
the github helper. Since the version is always defined as PKG_VERSION,
drop this argument and generate it automatically inside the helper
routine.
The github helper function is extended to support both 2 and 3 argument
variants (ie. either use the provided package version argument or
automatically substitute with PKG_VERSION if not available), which can
make the transition of the package files easier as well allows using the
3-argument variant outside of package definitions.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The author of lbase64 maintains 3 separate versions of the package for
the 3 Lua versions. Only the 5.1 version is uploaded to luarocks, so
that is the one we currently support in Buildroot.
However, the three versions are nearly identical. With a small patch,
this allows us to support all Lua versions from a single tarball.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch is based on works [1] and [2].
With this patch, one can run the Qt5 WebEngine quicknanobrowser sample
with the following options.
BR2_TOOLCHAIN_BUILDROOT_LIBC="glibc" and
BR2_TOOLCHAIN_BUILDROOT_CXX (Qt 5 needs a toolchain w/ wchar, NPTL, C++,
dynamic library; for now it builds only with glibc)
BR2_PACKAGE_LIBERATION (Qt needs at least one font)
BR2_PACKAGE_QT5BASE_EXAMPLES (to install quicknanobrowser sample)
BR2_PACKAGE_QT5BASE_GIF (do display gif)
BR2_PACKAGE_QT5BASE_JPEG (do display jpeg)
BR2_PACKAGE_QT5BASE_PNG (do display png)
BR2_PACKAGE_QT5QUICKCONTROLS (needed by webengine)
BR2_PACKAGE_QT5QUICKCONTROLS2 (needed by webengine)
BR2_PACKAGE_QT5WEBENGINE (because it is what we want)
Qt WebEngine requires an Open(E)GL-capable backend. As an example, the
package rpi-userland must be enabled to build for a rpi.
BR2_PACKAGE_RPI_USERLAND (to enable OpenGL ES backend)
To browse for HTTPS websites, please consider adding the following
options as well for SSL/TLS.
BR2_PACKAGE_CA_CERT (for certificates)
BR2_PACKAGE_NTPD (to sync date for certificates)
Since version 5.9, chromium requires udev at runtime (see note 4).
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV (input backend)
To run quicknanobrowser
# cd /usr/lib/qt/examples/webengine/quicknanobrowser/
# ./quicknanobrowser https://www.buildroot.org/
Note: The chromium.inc has been generated using the following command.
( echo 'CHROMIUM_LICENSE_FILES = \' &&
cd output/build/qt5webengine-5.9.1/ && \
find "src/3rdparty/chromium/" -type f -iname "*LICENSE*" -o -iname "*COPYING*" -o -iname "*GPL*" | \
sed -e '/\.asm$/d' \
-e '/\.h$/d' \
-e '/\.c$/d' \
-e '/\.cc$/d' \
-e '/\.cpp$/d' \
-e '/\.pyc\?$/d' \
-e '/\.pl$/d' \
-e '/\.sha1$/d' \
-e '/\.patch$/d' \
-e '/licensecheck/d' \
-e 's,^,\t,' \
-e 's,$, \\,' | \
sort && \
echo '' ) >package/qt5/qt5webengine/chromium.inc
Note 2: Since 5.9.1, the chromium's copy of opus fails with neon [3].
Qt WebEngine can uses buildroot ffmpeg copy which compiles fine (using
qmake flag WEBENGINE_CONFIG+=use_system_ffmpeg). It implies selecting
the following options.
BR2_PACKAGE_FFMPEG
BR2_PACKAGE_OPUS
BR2_PACKAGE_LIBVPX
BR2_PACKAGE_WEBP
BR2_PACKAGE_WEBP_DEMUX
In file included from ../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:31:0:
/home/gportay/src/buildroot/output-rpi3-qt5.9/host/lib/gcc/arm-buildroot-linux-gnueabihf/6.4.0/include/arm_neon.h:8997:1: error: inlining failed in call to always_inline ‘vld1q_s32’: target specific option mismatch
vld1q_s32 (const int32_t * __a)
^~~~~~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c:40:15: note: called from here
int32x4_t coef0 = vld1q_s32(coef32);
^~~~~
../../3rdparty/chromium/third_party/opus/src/silk/arm/NSQ_neon.c: At top level:
cc1: warning: unrecognized command line option ‘-Wno-#pragma-messages’
Note 3: Version 5.6.2 causes a build issue while building chromium. The
build against this version is disabled until the release 5.6.3 is out.
Note 4: Here is trace when udev does not run
# cd /usr/lib/qt/examples/webengine/quicknanobrowser
# ./quicknanobrowser
QStandardPaths: XDG_RUNTIME_DIR not set, defaulting to '/tmp/runtime-root'
Unable to query physical screen size, defaulting to 100 dpi.
To override, set QT_QPA_EGLFS_PHYSICAL_WIDTH and QT_QPA_EGLFS_PHYSICAL_HEIGHT (in millimeters).
[0101/000248.161973:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[0101/000248.384693:WARNING:resource_bundle_qt.cpp(114)] locale_file_path.empty() for locale
[202:223:0101/000248.484954:FATAL:udev_loader.cc(38)] Check failed: false.
#0 0x0000742b93de <unknown>
#1 0x0000742c3c38 <unknown>
#2 0x000073e1e1aa <unknown>
#3 0x000073e1d96e <unknown>
#4 0x000073e1defa <unknown>
#5 0x000074af6364 <unknown>
#6 0x000074302878 <unknown>
#7 0x0000742c8fee <unknown>
#8 0x0000742c9f44 <unknown>
#9 0x0000742ca21e <unknown>
#10 0x0000742cac4c <unknown>
#11 0x0000742c87b2 <unknown>
#12 0x0000742da4f6 <unknown>
#13 0x000073ed9d38 <unknown>
#14 0x000073eda03c <unknown>
#15 0x0000742e9aec <unknown>
#16 0x0000742e71dc <unknown>
Aborted
Note 5: On rpi and depending on what is insinde the .config, more GPU
memory should be allocated to run properly qt samples.
#0 0x0000742c63de <unknown>
#1 0x0000742d0c38 <unknown>
#2 0x0000749d7bde <unknown>
#3 0x0000749e3c70 <unknown>
#4 0x00007530227c <unknown>
#5 0x000075302480 <unknown>
#6 0x0000752fb1e4 <unknown>
#7 0x00007430f878 <unknown>
#8 0x0000742d5fee <unknown>
#9 0x0000742d6f44 <unknown>
#10 0x0000742d721e <unknown>
#11 0x0000742d7ad6 <unknown>
#12 0x0000742d57b2 <unknown>
#13 0x0000742e74f6 <unknown>
#14 0x0000742f6a74 <unknown>
#15 0x0000742f41dc <unknown>
Received signal 6
#0 0x0000742c63de <unknown>
#1 0x0000742c66a0 <unknown>
#2 0x0000725b5d10 <unknown>
[end of stack trace]
qml: Render process exited with code 256 (abnormal exit)
# mount /dev/mmcblk0p1 /mnt
# sed '/^gpu_mem_/s,=.*,=200,' -i /mnt/config.txt
# umount /mnt
Note 6: The first patch fixes a build issue when samples are compiled
without the support of printing [4]. This patch is already merged in
branch 5.9 [5] and concerns only 5.9.1.
085c2c52 Always compile QWebEnginePage::print
It fixes the error below.
.obj/browsermainwindow.o: In function `BrowserMainWindow::printRequested(QWebEnginePage*)': browsermainwindow.cpp:(.text+0x2cc0): undefined reference to `QWebEnginePage::print(QPrinter*, QWebEngineCallback<bool> const&)'
The second patch loads both libEGL and libGLESv2 symbols implicitly
instead of loading them with explicitly using hard-coded locations. It
fixes a bug when providers of lib*GL does not create libraries named
libEGL.so.1 and libGLESv2.s2 [6]. This patch is already merged in branch
5.9 [7].
d4c621f6 Load libEGL and libGLES2 symbols implicitly
It fixes the error below.
[327:347:1221/085837:ERROR:surface_factory_qt.cpp(68)] Failed to load /usr/lib/libGLESv2.so.2: /usr/lib/libGLESv2.so.2: cannot open shared object file: No such file or directory
[1]: http://lists.busybox.net/pipermail/buildroot/2015-July/132010.html
[2]: https://patchwork.ozlabs.org/patch/640633/
[3]: https://patchwork.ozlabs.org/patch/791332/
[4]: https://bugreports.qt.io/browse/QTBUG-61510
[5]: https://codereview.qt-project.org/#/c/198041/
[6]: https://bugreports.qt.io/browse/QTBUG-57761
[7]: https://codereview.qt-project.org/#/c/199554/
Cc: Akihiko Odaki <akihiko.odaki.4i@stu.hosei.ac.jp>
Cc: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout:
- move more dependencies to _ARCH_DEPENDS;
- mention all toolchain dependencies in the comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add the possibility to choose more test tools than only integck
from the MTD utils test-suite.
Move the hidden BR2_PACKAGE_MTD_TESTS configuration to the bottom
of the page and make it visible. When checked, a new list of available
binaries is displayed and may be selected and compiled into the image
with the --enable-install-tests configure script option:
- flash_torture
- flash_stress
- flash_speed
- nandbiterrs
- flash_readtest
- nandpagetest
- nandsubpagetest
Most of these tests may be performed by inserting kernel modules
which are almost legacy so having the userspace tools available
might become useful.
Legacy handling for users who had BR2_PACKAGE_MTD_INTEGCK selected is
not needed: they also have the BR2_PACKAGE_MTD_TESTS option enabled in
their .config. That option has now become a selectable option so it is
not removed any more by oldconfig.
Signed-off-by: Miquel Raynal <miquel.raynal@free-electrons.com>
[Arnout:
- fix threads and MMU dependency;
- order Config.in options and mtd.mk lines alphabetically;
- add note on legacy handling to commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
Commit cef57c9642 added
bananapi_m2_plus_defconfig but forgot to update .gitlab-ci.yml. Do it
now.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
grub is no longer maintained: it is stuck at version 0.97 with huge
patches that have no opportunity to be applied upstream, as upstream
has even renamed it grub-legacy.
Besides, it no longer builds correctly with recent binutils versions,
and even the huge patches we could grab from Debian do not help the
slightest.
Since upstream really considers it dead, and there are at least two
alternatives (grub2 and syslinux), just remove grub.
Add a legacy entry.
Remove the test cases as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add license file hashes and use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The Makefile in the package is not very versatile, so we need to go our
way to only build and install what we can.
Fixing the Makefile is not worth it, considering that we can quite
easily do all of that in our .mk.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: Add license file hash, use SPDX license name]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
DAHDI is the 'framework' to drive actual telehony cards. Using telephony
cards without signalling is pretty much meaningless, so signalling will
be added in later commits.
libtonezone is provided by dhadi-tools, while the dahdi headers are
provided by dahdi-linux. Go figure.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also provides libraries, so install in staging as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
dahdi-linux provides kernel modules to drive a variety of telephony
cards, ranging from low-end one-channel to higher-end multi-channel
cards. It also provides headers for userland to talk to those cards.
With a bit of love, dahdi-linux can use our kernel-module
infrastructure. Wee! :-)
Still, there are a few specificities about dahdi-linux.
First, it needs to install a few binary firmware blobs, which it wants
to download at install time. Since we do want to be able to do
completely off-line builds, we need to downlaod them manually. So we
have the full list of firmware blobs (even if some can only be used on
an i386/x86_64 target, we still uconditionally download them), for which
we have locally-computed sha256 (no hash provided by upstream for the
blobs).
Second, the install procedure for the firmware blobs needs to have
access to the Linux kernel .config file, so it can decide whether to
install the blobs or not. We can force not to install them, but we can't
force to install them... :-/ And anyway, we'd have to do the same check
as is already done by dahdi-linux, so no need to duplicate that.
Finally, the licensing is relatively weird. Although it is obvious and
straightforward for the most part of dahdi-linux, consisting of mostly
GPLv2 and a few LGPLv2.1, there is one gotcha.
Of the firmware blobs, one is provided as a .o file, with no licensing
information whatsoever, without any source available from upstream, but
is directly linked to a GPLv2 file.
This is very concerning, but there is not much we can do about it,
except delegate to the legal reviewer whether that is acceptable or not.
AS an aside, dahdi-linux drivers do not build with a kernel 4.0 or
later, as it uses internals that have been removed in linux-4.0. There
has been no update upstream dahdi-linux to fix that. There's not much we
can do, except warn the user in the help text.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: use SPDX license names and add hashes for license files]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
asterisk uses backtrace() from execinfo.h to print beuatiful backtraces
when it fails. But execinfo is only reliably available with glibc, while
it is optionbal in uClibc and completely missing in musl.
So, only enable backtrace support for glibc toolchains.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Asterisk: the flagship of telephony on Linux. These are the lines of
code whose continuous mission is to power small and large enterprises
telephony systems, to boldly provide IP PBX where no one has done so
before.
But it is a hell to get compiled... :-(
For starters, it needs a host tool, menuselect, to prepare its build
configuration. Unfortunately, the way it handles menuselect does not
apply very well for cross-compilation: the main ./configure calls out to
menuselect's own ./configure, and of course that runs with the same
environement, which is wrong for cross-compilation (because of variables
like CC, CFLAGS and the likes).
Furthermore, the paths to menuselect are imbricated about everywhere in
the main Makefile, so making it find menuselect in PATH is a lost cause.
Instead, we just patch-out the handling of menuselect, build it as the
host variant and copy it in place.
Now, asterisk wants to install a default set of sound files (for
answering machine stuff, I guess). They come come pre-bundled in the
official archive [0], but the buildsystem will want to download (at
install time) the sha1 files for each sound archive, to validate that
said archive is correct. However, the download is done via plain http,
so it still risks an MITM attack. And for Buildroot, it is not always
possible to download at install time, so we patch-out the sha1 check.
[0] http://downloads.asterisk.org/pub/telephony/asterisk/releases/
The official archive contains the sound archives plus a full set of
documentation. This makes it very big. Unfortunately, the hosting site
is rather slow, topping at about ~204kbps. So we get the archive from
the official mirror on Github. But that archive is missing the sound
archives, so we download them separately.
Some tests, like the crypt() one, are broken and could not have ever
possibly worked at all. Worse, the FFmpeg test is looking for headers
that FFmpeg removed more than 10 years ago and are virtually no longer
available in any distro. So, FFmpeg support is definitely not tested
by upstream and can't possibly work at all. Finally, trying to run
test-code does not work in cross-compilation.
As a final stroke of genius, asterisk checks for the re-entrant variant
of res_ninit(), and concludes that all such functions are available,
including res_nsearch(). Uclibc-ng has the former but not the latter, so
the build fails. Since there is no cache variable for that check, we
can't pre-feed that result to configure, and fixing it is a bigger
endeavour. So we make asterisk depend on glibc for now, until someone
is brave enough to fix it.
Almost all features are disabled for now. Support for additional
features will be added in subsequent patches now that we have a working
base.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- make libilbc a mandatory dependency instead of using the bundled one;
- add license, license files, and license file hashes;
- minor spelling corrections;
- remove redundant trailing backslash reported by check-package;
- rewrap help text to 72 columns instead of 68]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
fixup
MPD version 0.20 is affected by GCC bug 64735 and failes to build for
some archictuctures (NIOSII, ARMv4, ARMv5 and SPARCv8) with a GCC
toolchain less then version 7.
We added a version choice between 0.19 and 0.20 in Buildroot version
2017.02 as GCC 7 was not yet available at that time. This way, mpd could
still be build for those architectures.
As GCC 7 is now available in Buildroot remove the version choice for 0.19.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: board is from Sinovoip, not Lemaker, move board files,
Use kernel headers from kernel, explicitly use 4.13.3,
drop eth0 dhcp config, cleanup post-build args,
disable tar output format, use u-boot custom format,
add host-dosfstools/mtools for genimage, drop unused
host-uboot-tools/genext2fs]
Signed-off-by: Mike Harmony <mike.harmony@snapav.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only a static library is built (and no _INSTALL_TARGET_CMDS are defined), so
there is no need to run the target-install step.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NS_ENABLE_SSL was renamed to MG_ENABLE_SSL in v6.0, commit e1dd3f06fe33
(Rename Mongoose constants: NS_ -> MG_, NSF_ -> MG_F_), so use the new name
instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No linking is done since the package was reworked for v6.x in commit
9860746ff (mongoose: bump to version 6.1), so drop LDFLAGS and the list of
libraries to link against.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This define is not used anywhere in the mongoose sources since v6.0 (commit
8927c9d22b3f), so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch fixing CVE-2017-14062:
Integer overflow in the decode_digit function in puny_decode.c in
Libidn2 before 2.0.4 allows remote attackers to cause a denial of
service or possibly have unspecified other impact.
This issue also affects libidn.
Unfortunately, the patch also triggers reconf of the documentation
subdirectory, since lib/punycode.c is listed in GDOC_SRC that is defined
in doc/Makefile.am. Add autoreconf to handle that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-2862 - An exploitable heap overflow vulnerability exists in the
gdk_pixbuf__jpeg_image_load_increment functionality of Gdk-Pixbuf 2.36.6. A
specially crafted jpeg file can cause a heap overflow resulting in remote
code execution. An attacker can send a file or url to trigger this
vulnerability.
CVE-2017-2870 - An exploitable integer overflow vulnerability exists in the
tiff_image_parse functionality of Gdk-Pixbuf 2.36.6 when compiled with
Clang. A specially crafted tiff file can cause a heap-overflow resulting in
remote code execution. An attacker can send a file or a URL to trigger this
vulnerability.
CVE-2017-6311 - gdk-pixbuf-thumbnailer.c in gdk-pixbuf allows
context-dependent attackers to cause a denial of service (NULL pointer
dereference and application crash) via vectors related to printing an error
message.
The host version now needs the same workaround as we do for the target to
not pull in shared-mime-info.
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems github now sometimes provides slightly changed tarballs which
produce a different sha256 hash than before. This commit fixes the
hashes of the packages when sources.buildroot.net does not store a copy
of the tarball matching the current hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install tools into /usr/bin, not /usr/local/bin, since /usr/local/bin
is not in PATH by deafault.
[Peter: set PREFIX to /usr to really install into /usr/bin]
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Python3 version to 3.6.2.
Patches dropped:
"Support PGEN_FOR_BUILD and FREEZE_IMPORTLIB_FOR_BUILD"
Rationale: With commit 9d02f562961efd12d3c8317a10916db7f77330cc, code
generation step of building CPython now became explicit (instead of
always performed as a part of 'make' invocation) and more granular. We
no longer need to use Parser/pgen at all and tricking the build system
into using different Programs/_freeze_importlib can be done as a part
of recipe.
Additional info about the build change can be found at
https://bugs.python.org/issue23404
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a hash for the license file while we're at it.
[Peter: use tuxfamily.org URL for annoucement]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7555 - Augeas versions up to and including 1.8.0 are
vulnerable to heap-based buffer overflow due to improper handling of escaped
strings. Attacker could send crafted strings that would cause the
application using augeas to copy past the end of a buffer, leading to a
crash or possible code execution.
[Peter: extend description]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches with renames apply properly with patch >= 2.7, but not with
older patch versions. Since "git format-patch" by default generates
patches with renames, Buildroot developers often don't realize that
their patches will not apply properly on build machines that have
patch < 2.7. In order to prevent such a situation from happening
again, this commit adds some logic in apply-patches.sh to refuse
applying patches that contain renames.
Note that just searching for '^rename' is not sufficient, since the
patch commit message may contain the words "rename from" or "rename to"
as well. Therefore, the grep expression is made as accurate as possible,
checking both.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: spaces instead of tabs (suggested by Yann);
extend commit message.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When using an external toolchain that was built with Buildroot and a
merged /usr, the dynamic linker is actually in /usr/lib.
But the check_glibc macro limits the depth it is looking for the dynamic
linker, and misses it when it is in /usr/lib because it is too deep.
We could fix that in two ways: increase the depth in which we look
for it, or follow symlinks. We choose the second solution.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This bump
54e63e3f9a...303f418e1a
updated the transcoding support already present:
014bb9505e
To avoid these build errors
src/transcoding/codec/codecs/libs/libx26x.c:105:18: fatal error: x264.h: No such file or directory
#include <x264.h>
src/transcoding/codec/codecs/libs/libx26x.c:213:18: fatal error: x265.h: No such file or directory
#include <x265.h>
src/transcoding/codec/codecs/libs/libopus.c:23:31: fatal error: opus/opus_defines.h: No such file or directory
#include <opus/opus_defines.h>
we need to add dependency handling already with this patch and keep the
hard dependency x264 as minimum codec for transcoding but we now need
to enable BR2_PACKAGE_FFMPEG_GPL to enable x264-support also in ffmpeg.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
014bb9505e
extended the already present transcoding support and included vaapi-
accelerated transcoding.
In order to support these new options and their numerous dependencies
we add a new Kconfig option for transcoding support to allow users to
disable transcoding support, because they use tvheadend for recording
or by its internal hts protocol, for example with the kodi-pvr-hts
addon.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Mostly to compile imx-lib (providing libpxp) on i.MX6UL (which have a
PXP hardware unit) and to prevent compilation of imx-lib's modules not
supported on i.MX6UL.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some changes in addition to the version bump:
- The uint32_t patch is now upstream
- Drop --no-glib12 flag as support was removed in 2.0.23
- The host library path patch was refreshed
Signed-off-by: Joel Stanley <joel@jms.id.au>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: remove uint32_t patch from hash file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-cmake even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
XSA-226: multiple problems with transitive grants (CVE-2017-12135)
XSA-227: x86: PV privilege escalation via map_grant_ref (CVE-2017-12137)
XSA-228: grant_table: Race conditions with maptrack free list handling
(CVE-2017-12136)
XSA-230: grant_table: possibly premature clearing of GTF_writing /
GTF_reading (CVE-2017-12855)
XSA-231: Missing NUMA node parameter verification (CVE-2017-14316)
XSA-232: Missing check for grant table (CVE-2017-14318)
XSA-233: cxenstored: Race in domain cleanup (CVE-2017-14317)
XSA-234: insufficient grant unmapping checks for x86 PV guests
(CVE-2017-14319)
XSA-235: add-to-physmap error paths fail to release lock on ARM
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With the addition of the sdk support it may be interesting to build
host-pkgconf even though no packages need it, so expose it in menuconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The download location got changed two years ago when the version was bumped
to 0.9.12, but the upstream URL in Config.in wasn't updated.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
I'm going to leave current company and
this mail address is going to become invalid.
Signed-off-by: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-cmake will optionally link with openssl for the embedded copy of
libarchive if available, leaking host dependencies and possibly causing
build issues in case of compatibility issues - E.G. the host-cmake version
we have in 2017.02.x doesn't build against openssl-1.1.0+:
https://github.com/libarchive/libarchive/issues/810
The openssl support in libarchive is unlikely to be needed, so explicitly
disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000250 - All versions of the SDP server in BlueZ 5.46 and
earlier are vulnerable to an information disclosure vulnerability which
allows remote attackers to obtain sensitive information from the bluetoothd
process memory. This vulnerability lies in the processing of SDP search
attribute requests.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit be8e32d585 ("netsnmp: configurable MIB modules"),
the list of MIB modules can be selected with a configuration option.
However, there was still an hardcoded list of MIB files to exclude from
the target filesystem.
Since it is complicated to know which MIB files are necessary according
to the configuration, let's install all of them.
Cc: przemyslaw <przemyslaw.wrzos@calyptech.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Added upstream patch to fix build error:
move.o: In function `do_page_up':
move.c:(.text+0x150): undefined reference to `leftedge_for'
move.o: In function `do_page_down':
move.c:(.text+0x20c): undefined reference to `leftedge_for'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There aren't really any changes that matter for the buildroot image,
but the project has been moved over to kernel.org and is now available
in a release tarball, so simplify the .mk file by removing any
autoreconf stuff.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch fixing compilation on the systems without C++ compiler.
Also add licence hashes.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This also moves the source tree to the new official upstream location at
ibm-power-utilities GitHub organisation.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mbimcli and mbim-network are GPLv2+ (COPYING file applies) and
libmbim-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qmicli, qmi-network and qmi-firmware-update are GPLv2+ (COPYING file
applies) and libqmi-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ModemManager and mmcli are GPLv2+ (COPYING file applies) and
libmm-glib is LGPLv2.1+ (COPYING.LIB file applies).
Also, setup hashes of the license files, for a correct
"make legal-info".
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Force gzip compression level 6 when calculating hash of a downloaded GIT repo.
To make sure the tar->gzip->checksum chain always provides consistent result.`
The script was relying on the default compression level, which must not be
necessarily consistent among different gzip versions. The level 6 is gzip's
current default compression level.
Signed-off-by: Petr Kulhavy <brain@jikos.cz>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fscryptctl is a low-level tool written in C that handles raw keys and
manages policies for Linux filesystem encryption.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2017.09 and kernel to 4.12.12 version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Memory references to DI mode objects could incorrectly be created at
offsets that are not supported by instructions l32i/s32i, resulting in
ICE at a stage when access to the object is split into access to its
subwords:
drivers/staging/rtl8188eu/core/rtw_ap.c:445:1:
internal compiler error: in change_address_1, at emit-rtl.c:2126
Fixes: https://lkml.org/lkml/2017/9/10/151
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of integer overflows and DoS issues.
[Peter: explain security impact]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
Add an upstream patch fixing build without python.
Add two more patches (one of them upstream) fixing cross compile of the
python client library.
Enable devinput and uinput unconditionally to suppress non cross compile
compatible host checks.
Set DEVINPUT_HEADER to target header of input events to avoid use of
host header.
Add python3 as optional dependency.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patch applied upstream, switched to cmake-package following
upstream removal of autoconf.
Short summary of changes:
version 1.0.1
- switched from autoconf to cmake
version 1.0.0:
- fixed CVE-2014-8242
- project moved to github
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the SixXS project has ceased its operation on 2017-06-06,
the aiccu utility has been removed.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add optional dependency on libcap, which exists since this version
bump.
Signed-off-by: Thomas Faivre <thomas.faivre@6wind.com>
[Thomas: add explicit --with-libcap.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-11610 - The XML-RPC server in supervisor before 3.0.1, 3.1.x
before 3.1.4, 3.2.x before 3.2.4, and 3.3.x before 3.3.3 allows remote
authenticated users to execute arbitrary commands via a crafted XML-RPC
request, related to nested supervisord namespace lookups.
For more details, see
https://github.com/Supervisor/supervisor/issues/964
While we're at it, add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We unfortunately cannot use the upstream patches directly as they are not in
'patch -p1' format, so convert them and include instead.
Fixes:
CVE-2017-0899 - RubyGems version 2.6.12 and earlier is vulnerable to
maliciously crafted gem specifications that include terminal escape
characters. Printing the gem specification would execute terminal escape
sequences.
CVE-2017-0900 - RubyGems version 2.6.12 and earlier is vulnerable to
maliciously crafted gem specifications to cause a denial of service attack
against RubyGems clients who have issued a `query` command.
CVE-2017-0901 - RubyGems version 2.6.12 and earlier fails to validate
specification names, allowing a maliciously crafted gem to potentially
overwrite any file on the filesystem.
CVE-2017-0902 - RubyGems version 2.6.12 and earlier is vulnerable to a DNS
hijacking vulnerability that allows a MITM attacker to force the RubyGems
client to download and install gems from a server that the attacker
controls.
For more details, see
https://www.ruby-lang.org/en/news/2017/08/29/multiple-vulnerabilities-in-rubygems/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bind autoconf scripts look for lmdb.h in /usr/include (even when
cross-compiling). When liblmdb-dev is installed, this causes the
following error:
...
checking for lmdb library... yes
checking for library containing mdb_env_create... no
configure: error: found lmdb include but not library.
Fix this by disabling explicitly lmdb support.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
strace moved to a new homepage as upstream commit 2bba131575878 (Update
homepage URL) indicates.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CVE-2016-8687: Stack-based buffer overflow in the safe_fprintf function
in tar/util.c in libarchive 3.2.1 allows remote attackers to cause a
denial of service via a crafted non-printable multibyte character in a
filename.
CVE-2016-8688: The mtree bidder in libarchive 3.2.1 does not keep track
of line sizes when extending the read-ahead, which allows remote
attackers to cause a denial of service (crash) via a crafted file, which
triggers an invalid read in the (1) detect_form or (2) bid_entry
function in libarchive/archive_read_support_format_mtree.c.
CVE-2016-8689: The read_Header function in
archive_read_support_format_7zip.c in libarchive 3.2.1 allows remote
attackers to cause a denial of service (out-of-bounds read) via multiple
EmptyStream attributes in a header in a 7zip archive.
CVE-2016-10209: The archive_wstring_append_from_mbs function in
archive_string.c in libarchive 3.2.2 allows remote attackers to cause a
denial of service (NULL pointer dereference and application crash) via a
crafted archive file.
CVE-2016-10349: The archive_le32dec function in archive_endian.h in
libarchive 3.2.2 allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted file.
CVE-2016-10350: The archive_read_format_cab_read_header function in
archive_read_support_format_cab.c in libarchive 3.2.2 allows remote
attackers to cause a denial of service (heap-based buffer over-read and
application crash) via a crafted file.
CVE-2017-5601: An error in the lha_read_file_header_1() function
(archive_read_support_format_lha.c) in libarchive 3.2.2 allows remote
attackers to trigger an out-of-bounds read memory access and
subsequently cause a crash via a specially crafted archive.
Add upstream patch fixing the following issue:
CVE-2017-14166: libarchive 3.3.2 allows remote attackers to cause a
denial of service (xml_data heap-based buffer over-read and application
crash) via a crafted xar archive, related to the mishandling of empty
strings in the atol8 function in archive_read_support_format_xar.c.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change setup type to setuptools.
Add a patch removing the pytest-runner dependency. The patch was sent
upstream.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Qt package currently fails to build on ARMv8 cores in 32-bit mode
(for example, if you select ARM and then Cortex-A53), because the ARM
atomic operation implementation in Qt checks if we're on ARMv7, then
on ARMv6, and otherwise falls back to an ARMv5 implementation. The
latter uses the swp instruction, which doesn't exist on ARMv8, causing
a build failure.
To solve this, we simply add a patch that uses the ARMv7 atomic
operations for ARMv8-A.
There is no autobuilder reference because we don't have any ARMv8
32-bit configuration in the autobuilders.
Cc: <ivychend@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-12938 - UnRAR before 5.5.7 allows remote attackers to bypass a
directory-traversal protection mechanism via vectors involving a symlink to
the . directory, a symlink to the .. directory, and a regular file.
CVE-2017-12940 - libunrar.a in UnRAR before 5.5.7 has an out-of-bounds read
in the EncodeFileName::Decode call within the Archive::ReadHeader15
function.
CVE-2017-12941 - libunrar.a in UnRAR before 5.5.7 has an out-of-bounds read
in the Unpack::Unpack20 function.
CVE-2017-12942 - libunrar.a in UnRAR before 5.5.7 has a buffer overflow in
the Unpack::LongLZ function.
For more details, see
http://www.openwall.com/lists/oss-security/2017/08/14/3
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-6362: Double-free in gdImagePngPtr()
CVE-2017-7890: Buffer over-read into uninitialized memory
Drop patches no more needed:
0001-gdlib-config.patch: @LIBICONV@ is nowadays correct AC_SUBST'ed by
configure
0002-gd_bmp-fix-build-with-uClibc.patch: upstream uses ceil() since
6913dd3cd2
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to 4.13 kernel and remove all the dts patches as they
are part of upstream now.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libqmi library and tools come with several optional features that
may be enabled or disabled during build.
This patch adds support to automatically enable or disable them based
on the presence of the required dependencies for each:
* QMI-over-MBIM is enabled if libmbim is selected.
* udev support in qmi-firmware-update is enabled if libgudev is
selected.
* MM runtime check in qmi-firmware-update is enabled if ModemManager
is selected (but we don't build-depend on it, the runtime check is
done using plain glib2 DBus operations).
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps web2py to the latest version R-2.15.4 and bumps
also the python-pydal dependency to the required latest version 17.8.
Starting with version R-2.15.x web2py supports also python 3, so
updating the package to support both versions.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps lcdproc to version 0.5.9, and switches to the new
upstream on github.
The new version also compiles with musl without any patches.
Signed-off-by: Sven Haardiek <sven.haardiek@greenbone.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream migrated to automake for autotools: the "installlib" target
no longer exist, and we can use the standard "install" target, and
therefore drop the special INSTALL_STAGING_OPTS and
INSTALL_TARGET_OPTS variables.
Add license hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
minnowboard_max-graphical_defconfig has the line "BR_TARGET_GRUB2=y",
but this currently has no effect because BR_TARGET_GRUB2 cannot be
selected without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by
default.
The minnowboard max defconfig was updated to fix this problem, but the
graphical variant was not updated alongside it.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The galileo_defconfig has the line "BR_TARGET_GRUB2=y", but this
currently has no effect because BR_TARGET_GRUB2 cannot be selected
without BR2_TOOLCHAIN_BUILDROOT_WCHAR=y, which is not set by default.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 44b5637ab2 (e2fsprogs: add a patch to link against SEM_INIT libs)
introduced a patch that effectively adds -lpthread to the link command
with libcom_err. Today the only libc with separate libpthread is glibc
that does not support static build. The generated libcom_err.so.2.1
library links with libpthread with or without this patch. Drop this
patch.
Cc: Daniel Mack <daniel@zonque.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit c96b8675ea
("support/scripts/check-bin-arch: ignore symbolic links") was bogus,
because it tested ${f}, which is the relative path of the file inside
${TARGET_DIR}, so we end up testing if ${f} on the system is a
symbolic link.
This commit fixes that by testing ${TARGET_DIR}/${f}.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit da32b49f00
("instrumentation: extend packages-file-list.txt with symlinks and
directories"), the packages-file-list.txt also contains symbolic
links. Therefore, check-bin-arch is now also checking symbolic links.
However, symbolic links in $(TARGET_DIR) can have absolute path as
targets, such as:
$ ls -l output/target/sbin/ifdown
lrwxrwxrwx 1 thomas thomas 10 Sep 3 15:55 output/target/sbin/ifdown -> /sbin/ifup
Therefore, we are now potentially checking a host binary, which
obviously makes check-bin-arch fail.
This commit changes check-bin-arch to ignore symbolic links. Indeed,
we have two cases:
- The symbolic link really points to something that will in the
rootfs (such as /sbin/ifup above). In this case, /sbin/ifup will be
checked separately by check-bin-arch.
- The symbolic link doesn't point to something that will be in the
rootfs, and that is not a problem from the perspective of
check-bin-arch, which checks the architecture of target binaries.
Fixes:
http://autobuild.buildroot.net/results/16d384a0183d477646ac7692feb65f00dde7d068/
(vim)
http://autobuild.buildroot.net/results/50429c0f63a8befff9e20899327b9a8d754d99be/
(ifupdown)
http://autobuild.buildroot.net/results/1db65973e782bfa61abcbccd3501bfd235f77288/
(gawk)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to https download for firewall compatibility and security.
As upstream now defaults to 'gpg' for the main binary name, keep the
'gpg2' name as in previous releases, to avoid conflict with the gnupg
package.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
curlbuild.h was removed in recent versinos of curl, backporting a
patch from mainline to fix it until a newer version of sysdig is
released.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Provide the path to HOST_DIR for libxml, libxslt and libiconv like for
the target variant to avoid a build issue on host where /bin is a
symlink to /usr/bin.
Indeed, the configure script use a custom m4 macro XSTAR_LIB_CHECK to
find xml2-config:
XSTAR_LIB_CHECK([LIBXML], [xml2-config])
This macro come from a local m4 file m4/xstar-check-libs.m4 where it
use:
AC_PATH_PROG(LIBXXX()_CONFIG, xxx_config(),
[], [$LIBXXX()_PREFIX/bin$PATH_SEPARATOR$PATH]
Since no prefix seems to be defined by $LIBXXX()_PREFIX, AC_PATH_PROG
look by itself at /bin/ for xml2-config. So the PATH variable set
by Buildroot containing HOST_DIR/bin is ignored.
The wrong xml2-config is used during the build and the build fail
when no xml2 headers are installed on the host.
Fixes:
src/xml_C14N.c:12:31: fatal error : libxml/xmlversion.h : No such file or directory
#include <libxml/xmlversion.h>
^
In file included from src/trans.c:4:0:
src/trans.h:32:30: fatal error : libxml/xmlmemory.h : No such file or directory
#include <libxml/xmlmemory.h>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: remove french messages from the commit log, drop
--with-libiconv-prefix option, since we don't have a libiconv
dependency for the host.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ts4900 defconfig is upstream in Linux since v4.9:
a2f1145 ARM: dts: TS-4900: add basic device tree
Bump kernel version to v4.12 and use the upstreamed defconfig
imx_v6_v7.
Signed-off-by: Mathieu Audat <mathieu.audat@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change extends to the login utilities the current policy of having
a selection item in the configuration menu for each utility that has an
--enable/--disable knob in the "configure" script:
- add selection items for login, runuser, su and sulogin (there was
already an item for "last")
- move "login utilities" to Config.in.legacy
- make "login utilities" select last, login, runuser, su and sulogin
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel help-text states, "The ext4 filesystem requires that this feature
be enabled <...> otherwise, it will refuse to mount in the read-write
mode any filesystems that use the huge_file feature, which is enabled by
default by mke2fs.ext4."
If the rootfs is to be (re)mounted rw at boot, this must be set for the
system to successfully come up.
Signed-off-by: Nicholas Sielicki <sielicki@yandex.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building 3.1.9 still fails after removing patch 0002:
volume.c:383:26: error: 'ldap_config_valid' undeclared (first use in this function)
if (!ldap_config_valid || vol->v_flags & AFPVOL_NONETIDS)
Bumping to 3.1.11 solves the problem.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 72e89edfcb. Due to
some change in fontconfig, it tries to re-generate a file using
gperf. Adding a dependency on host-gperf would solve the problem, but
really this is an upstream bug that should be reported and fixed
rather than worked around by adding the host-gperf dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61c4c63 (package/lzo: switch to cmake), building lzo has switched
from autotools to cmake. In the conversion, we've lost the build of the
shared library, because the cmake-based buildsystem of lzo explcitly
disables it by default.
Restore the shared library build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the recent NLS rework, BR2_ENABLE_NLS doesn't imply the absense of --disable-nls, so
configure may fail with:
configure: error: "The gtk client cannot be built without nls support. Try adding either --enable-nls or --without-gtk"
So adjust the dependencies to use BR2_SYSTEM_ENABLE_NLS instead.
As mentioned by Arnout, an alternative solution could be to explicitly pass
--enable-nls as the stub functions are now available everywhere - But I went
with the dependency for consistency reasons.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following configure issue:
checking for GTK... no
configure: error: Package requirements (gtk+-3.0 >= 3.4.0
glib-2.0 >= 2.32.0
gio-2.0 >= 2.26.0,
gmodule-2.0 >= 2.32.0
gthread-2.0 >= 2.32.0) were not met:
libgtk2 support was dropped in commit cdd71c642724 ((trunk gtk) #4970 remove
deprecated GTK+ API calls, raise GTK+ dependency to 3.2) which was part of
transmission-2.61.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are the changes implemented:
* Remove dbus-glib as a dependency, as it isn't required since
ModemManager 1.0, which is based on libglib2's GDBus
implementation.
* Remove udev as a dependency, as the ModemManager build only needs
the libgudev package.
* Explicitly set libglib2 as dependency, which currently was being
implicitly included by libgudev. The next major ModemManager
release will have udev/libgudev as optional packages, while
libglib2 is definitely not going to be ever optional.
* Add a comment explaining that dbus is only a runtime dependency.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Brock Williams <brock@cottonwoodcomputer.com>
[Thomas:
- properly handle the NLS cases, by adding two patches
- use sha256 locally calculated hash for the tarball, add hash for
the license file
- fix the license information: it's GPL-2.0 licensed, and the license
file is doc/COPYING.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently packages version 1.18 of simics, which is quite
out of date, and does not compile with Linux 4.12+. The latest package
v1.22 supports recent kernels, however that is not publicly available
anymore like the older versions.
In fact Simics is now moving away from the simicsfs kernel module, as
the kernel module has required too much maintenance work. Users should
move to the new user mode Simics agent instead. Therefore, we drop the
corresponding package from Buildroot.
Signed-off-by: Bin Meng <bmeng.cn@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tweak 0003-Sanitize-the-installation-process.patch for 2.2.4
Tweak 0004-Remove-PIE-flags-from-the-build.patch for 2.2.4
Remove 0005-Fix-static-linking-with-GnuTLS.patch as it was merged upstream
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 fails to configure when BR2_SSP_ALL is enabled, with the following
configure error:
checking whether -fno-asynchronous-unwind-tables works... yes
checking whether -fno-unwind-tables works... yes
checking for target linking format... unknown
configure: error: no suitable link format found
This can be worked around by enforcing -fno-stack-protector in the
package CFLAGS in a way that overrides the SSP flag, as is already done
for the valgrind package.
Fixes bug #10261.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Reported-by: Dr I J Ormshaw <ian_ormshaw@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-0379: Mitigate a local side-channel attack on Curve25519
dubbed "May the Fourth be With You".
As we are close to release, don't update to the latest 1.8.1 version,
but to a maintenance release from the 1.7 branch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mitigate a flush+reload side-channel attack on RSA secret keys
dubbed "Sliding right into disaster". For details see
<https://eprint.iacr.org/2017/627>. [CVE-2017-7526]
Switch to https site for better firewall compatibility and security.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
clock_gettime is defined locally, and calls pth_int_time, which
in turn calls clock_gettime.
The USB backend shouldn't overrule clock_gettime in the first place.
This patch fixes this endless recursion by removing the local defition.
Signed-off-by: Kurt Van Dijck <dev.kurt@vandijck-laurijssen.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1b974425 (MIPS: add support for M6201 cores) explained that the
new core was not supported by upstream gcc, and as of gcc-8-trunk
that's still the case.
Ditto for 3cfbeb83 (MIPS: add support for P6600 cores).
This means that we currently allow to build an internal tolchain for
those cores, yet we have no suitable gcc version.
Disable the internal backend in this case.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-vim is needed to provide the xxd tool, otherwise the build fails
with:
checking for xxd... no
configure: error: "xxd is required (provided by vim package)"
This isn't noticed by the autobuilders, presumably because all of them
have vim installed locally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Vim contains a tool called xxd, which is needed by mediastreamer on
the host as part of its build process. Therefore, this commit
introduces a host variant for the vim package, that will be used by
mediastreamer.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit f837251785 ("package/libv4l:
allow build of v4l2 utilities on noMMU platforms"), Hugues Fruchet
added a bunch of patches to libv4l in order to allow the v4l utilities
to be built on noMMU platforms.
However, as part of those patches, he entirely disabled the build of
libv4l in static linking configurations, because libv4l uses
dlopen(). Unfortunately, this breaks the build of applications like
mediastreamer in static linking configurations, and generally makes
our libv4l packages a little bit awkward: you can enable it, but it
doesn't install anything (in static linking configurations).
A closer look shows that dlopen() is only used by libv4l for plugin
support, and libv4l only provides one single plugin, and its build is
already conditional. Therefore, this commit adds yet another patch to
libv4l, which re-enables the build of libv4l, but disables the
plugin-related logic when plugin support is disabled (and it was
already automatically disabled in static linking configurations).
While at it, we update the comment in libv4l.mk that lists the patches
that makes autoreconf necessary.
Fixes the build of mediastreamer:
http://autobuild.buildroot.net/results/af091cfd0508df9395778cdc796f77e95c168410/
Cc: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch is much smaller the the previous one and will unlikely cause
a conflict with some forthcoming 2.30.x release.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit will enable tpuarts in eibd as well. tpuarts is as
important as FT1.2 support, which is already enabled by default.
This causes a 8 KB increase of the installed size in /usr/bin (728 KB
instead of 720 KB for /usr/bin), so not enough to justify a separate
configuration option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to cc-tool that fixes the boost.m4 logic used
to detect the linker rpath option so that it works properly with
static linking and additional libraries passed in LIBS.
This is the second step to fix static linking of cc-tool on
architectures like SPARC that need to link against libatomic:
http://autobuild.buildroot.net/results/ed9f2524d0ccef318ff1bc99e5dea980111de989/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Just like -lpthread was passed in LIBS, -latomic should also be passed
in LIBS. In order for this to work, we however need to first fix
cc-tool's Makefile.am so that it does not overwrite LIBS.
This is the first part of fixing the build of cc-tool in a static
linking scenario on SPARC, i.e to fix:
http://autobuild.buildroot.net/results/ed9f2524d0ccef318ff1bc99e5dea980111de989/
The patch has been merged upstream, in
553f9c6016.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added all hashes provided by upstream.
Removed dependency to mtdev after:
167bbb6d10
libdrm is now a hard dependency:
b030897b38
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: drop "select BR2_PACKAGE_LIBDRM" from sub-option, now that it
is selected by the main option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Release notes: https://mariadb.com/kb/en/mariadb-10126-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10126-changelog/
Fixes the following security vulnerabilities:
CVE-2017-3636 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.56 and earlier and 5.6.36 and earlier. Easily exploitable vulnerability
allows low privileged attacker with logon to the infrastructure where MySQL
Server executes to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized update, insert or delete access to
some of MySQL Server accessible data as well as unauthorized read access to
a subset of MySQL Server accessible data and unauthorized ability to cause
a partial denial of service (partial DOS) of MySQL Server.
CVE-2017-3641 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DML). Supported versions that are affected are
5.5.56 and earlier, 5.6.36 and earlier and 5.7.18 and earlier. Easily
exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful
attacks of this vulnerability can result in unauthorized ability to cause
a hang or frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2017-3653 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.56 and earlier, 5.6.36 and earlier and 5.7.18 and earlier. Difficult
to exploit vulnerability allows low privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized update, insert or delete
access to some of MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a config option to install the ql2xxx firmware binaries for QLogic
Fibre Channel adapters.
Since this doesn't quite fit under the existing categories in Config.in,
include it under a new category named "Fibre Channel Adapter Firmware".
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Reviewed-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Among other small fixes, the new version fixes crashes when running in
X11 without GLX (i.e. using EGL). Additionally, the changes from patch
"0002-Make-EGL-support-optional.patch" were committed upstream, and the
file can be dropped.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches continue to apply with no changes. 7.2.0 is a bugfix
release of the 7.x branch.
The only change that is not a simple bump is that the 7.2.0 tarball is
now available xz-compressed instead of bz2-compressed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libunwind configure script explicitly links libunwind against
libgcc_s. libgcc_s is only guaranteed to be available for toolchains
that supports dynamic linking: pure static linking toolchains only
have libgcc.a, not libgcc_s.so.
Therefore, let's make libunwind unavailable on toolchains that lack
dynamic linking support. We could potentially support linking with
libgcc, but switching to libgcc_s was done upstream because libgcc was
lacking some symbols on ARM
(https://lists.nongnu.org/archive/html/libunwind-devel/2014-06/msg00024.html). Even
though recent gcc versions seem to provide such symbols in libgcc.a,
having libunwind available on static linking configurations is not a
useful enough use-case to do the necessary research to find when this
issue was fixed in gcc.
Since libunwind is not used as a mandatory dependency in any package,
adding this !BR2_STATIC_LIBS dependency is trivial and nicely avoids
the problematic situation.
This fixes two different autobuilder failures:
- Gstreamer 1.x programs failing to link, because libunwind links
against libgcc_s that isn't available (static linking
configuration):
http://autobuild.buildroot.net/results/9d4fbf7167e9afce0eef5c9e0cfd42c966ecba36/
- Gmrender-resurrect, which fails to link, because GStreamer 1.x uses
some libunwind functionality, but does not take into account the
libunwind dependency in its .pc files (static linking
configuration):
http://autobuild.buildroot.net/results/0a3a2485c187a000482c178f1e9c64dd716a858f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current commit is from Sep 23, 2016. Update to latest commit from
Jul 11, 2017 to add support for i.MX6ULL processors.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit is similar to 350941e31d
("python: remove target Python packages from PYTHONPATH") but for
python3.
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON3_VERSION_MAJOR)/site-packages/
inside the PYTHON3_PATH variable, which gets used to define
PYTHONPATH, passed to the host Python interpreter when
building/installing target packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
This change fixes the following build failures:
http://autobuild.buildroot.net/results/9005b89407e46b537a54cac6cc0c69dcac4dc5ea/
(python-cryptography)
http://autobuild.buildroot.net/results/395682d33d02fdcaa39d3c0326355bd9ea3d6feb/
(python-pynacl)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit backports three patches that are already upstream in
kvmtool fixing build warnings with musl. Those are not strictly needed
for the build to succeed, they just reduce the amount of warning
noise.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In Linux 4.12, the header <asm/msr-index.h> has been removed from the
set of headers exported to userspace. Therefore, it cannot be used by
kvmtool anymore. This commit takes the simple approach of duplicating
inside kvmtool the MSR_* definitions that were used from this
<asm/msr-index.h> header.
This fixes:
x86/kvm-cpu.c:7:27: fatal error: asm/msr-index.h: No such file or directory
#include <asm/msr-index.h>
Which is the second part of:
http://autobuild.buildroot.net/results/4459a909e735343d1cf768d30466bc3c57eca19e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 392b0a26f5 (toolchain-external: default BR2_TOOLCHAIN_EXTERNAL_PATH
to empty), calling 'make clean' or similar can yield a spurious stderr
message:
dirname: missing operand
Try 'dirname --help' for more information.
Which is definitely baffling and unsettling...
It turns out that it is pretty trivial to reproduce, and this defconfig
is just enough:
$ cat my-defconfig
BR2_TOOLCHAIN_EXTERNAL=y
$ make BR2_DEFCONFIG=$(pwd)/my-defconfig defconfig
$ make clean
dirname: missing operand
Try 'dirname --help' for more information.
[--snip--]
This is because the cross-compiler is not found in the PATH (and for
good reasons, I don't have it in the PATH, not even at all).
So, when the cross-compiler is not found in the path, we simply
continue as if all was good, and postpone the check to much later,
when we try to copy the toolchain libs...
So, use a make construct rather than calling to the shell: $(dir ...)
does not whine if passed nothing.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since Toradex V2.7 SDK, U-Boot image has changed from u-boot.imx to
SPL + u-boot.img.
Also fix U-Boot build error with GCC6.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2c8de6c4 (gcc 4.9.1: add patch for PR60102) removed the SPE
condition becasue of said PR, but forgot to remove the associated
comment, which has been tagging along all this time...
Remove it, it is no longer valid and causes confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The VC4 GPU does not support full GL, it only provides EGL.
Currently, it is possible to build the VC4 backend without EGL support,
but that does not make sense in the slighest.
So, forcibly enable EGL with VC4, like is done for etnaviv and virgl.
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This adds a patch cherry-picked from libepoxy 1.4.2, which adds missing
NULL-pointer checks and avoids segmentation faults when using libepoxy
under X11, when the server does not have the GLX extension, or it is
disabled -- and applications can still use EGL.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we use the cross-compiler to build syslinux with a recent binutils
version, it fails with:
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld -Bsymbolic -pie -E --hash-style=gnu -T
/builds/arnout/buildroot/output/build/syslinux-6.03/core/i386/syslinux.ld -M -o ldlinux.elf ldlinux.o \
--start-group libcom32.a --whole-archive /builds/arnout/buildroot/output/build/syslinux-6.03/bios/com32/lib/libcom32core.a libldlinux.a --end-group -N
--no-omagic \
> ldlinux.map
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld: ldlinux.elf: Not enough room for program headers, try linking with -N
/builds/arnout/buildroot/output/host/bin/i586-buildroot-linux-uclibc-ld: final link failed: Bad value
/builds/arnout/buildroot/output/build/syslinux-6.03/core/Makefile:167: recipe for target 'ldlinux.elf' failed
Backport an upstream patch that reorganises the i386 bios build by
removing some symbols and making others hidden. To simplify the
backport, an additional patch that also touches the link script is
also included - it anyway looks like that patch could be relevant as
well.
Partially fixes: https://gitlab.com/arnout/buildroot/-/jobs/28979377
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also the last two are regenerated, their context has changed due to
the patches that have been removed earlier.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the build of libspatialindex on the Microblaze
architecture by working around a gcc bug, by passing -O0 as the
optimization level.
A patch to configure.ac is needed to not have -O2 be forced by the
libspatialindex build system, and therefore AUTORECONF=YES is now
needed.
Fixes:
http://autobuild.buildroot.net/results/bbba2a2c97dbec21340c7fd07162a316a411cba4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In case we're using an initrd, we create an empty "root" directory that
will contain only the bootloader stuff, not the actual root filesystem,
because it is in an initrd (standalone or initramfs).
We have to ensure that the directory is empty before assembling the
filesystem (to avoid any file lingering from a previous run, like the
sequence "make; make"). So we first remove it before we create it, so
that on each build (especially not-from-scratch builds) we get the exact
expected content without any leftover.
However, the macro responsible for that, although defined since 7080eef9,
was never called.
Fix that by registering it as a pre-gen hook.
Note: the directory need not be created, as there are quite a few
"install -D" commands that ensure it is created. Yet, we prefer to
create it explicitly to avoid any confusion.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Although the issue can very well occur with low-paralle builds, or even
with non-parallel builds, the conditions are so strict that the ocasion
it breaks is extremely rare, to the point where a failure would go
unnoticed.
Fixes#10141.
Reported-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
elf2flt contains a program called ld-elf2flt, which gets installed as
a replacement for ld, with ld renamed to ld.real. This program
therefore calls ld.real internally.
The logic to find ld.real worked fine for:
- bin/TARGET_ALIAS-ld
- TARGET_ALIAS/bin/ld
However, it failed badly if bin/SIMPLER_TARGET_ALIAS-ld is used, as
symlink to bin/TARGET_ALIAS-ld. For example:
$ ./output/host/bin/arm-buildroot-uclinux-uclibcgnueabi-ld
/home/thomas/buildroot/buildroot/output/host/bin/../arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: no input files
$ ./output/host/bin/arm-linux-ld
arm-linux-ld (ld-elf2flt): error trying to exec '/home/thomas/buildroot/buildroot/output/host/bin/ld.real': execvp: No such file or directory
$ ./output/host/arm-buildroot-uclinux-uclibcgnueabi/bin/ld
/home/thomas/buildroot/buildroot/output/host/arm-buildroot-uclinux-uclibcgnueabi/bin/ld.real: no input files
This commit fixes that by adding a patch that adjusts the ld-elf2flt
logic to properly cope with this situation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes serious usability issues (Debian changelog):
* Fixed whois referrals for .com, .net, .jobs, .bz, .cc and .tv,
broken by an ICANN-mandated output change:
https://www.icann.org/resources/pages/rdds-labeling-policy-2017-02-01-en
Use snapshot.debian.org for the .dsc reference, since files tend to
disappear from the official Debian ftp site over time.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Recent glibc have deprecated the implicit include of sys/sysmacros.h
from sys/types.h. That means that the macros major and minor are no
longer defined unless this header is included.
This problem was observed for host-e2fsprogs when building on a host
with recent glibc.
Add an upstream patch that includes sys/sysmacros.h when needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Dagg Stompler <daggs@gmx.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Tested-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for imx7d-pico, which is a board based on NXP
i.MX7D processor.
For more information about this board, please visit:
http://www.technexion.org/products/pico/pico-som/pico-imx7-emmc
Signed-off-by: Vanessa Maegima <vanessa.maegima@nxp.com>
[Thomas:
- add upstream references for the Linux kernel patches
- fix typoes in readme.txt
- remove audio-related packages in defconfig
- regenerate .gitlab-ci.yml]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The DEVELOPERS file lists file patterns, but the get-developers script
only supports getting packages and CPU architectures. Some files are
neither of those, e.g. defconfigs, support files, package infras, ...
Add a '-f' option that allows to give a list of files for which to get
the developer(s).
Note that the DEVELOPERS file contains directories as well as files,
and the directories are not expanded into individual files. Therefore,
we have to use f.startswith(devfile) to match a directory. This assumes
that the directory name ends with /, otherwise 'package/python' would
also match 'package/python-foo'. Since we make sure that directories do
end with / in the DEVELOPERS file, and since false positives are not
much of an issue in this case, this isn't a problem.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unbreak failing defconfig.
Resulting kernel and rootfs booted on ci20 device.
While at it, drop the useless BR2_TARGET_UBOOT_VERSION variable, this
variable is a hidden variable, so it is useless to mention it in a
defconfig.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: drop BR2_TARGET_UBOOT_VERSION.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to the sysvinit package that fixes various
build issues against musl due to missing header includes.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest version of sysdig introduced a variable for the kernel module
name. This patch updates that variable into Makefile.in.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-common implies
that it is common to all skeletons, yet it does not apply to
skeleton-custom. It is only common to the skeleton-init-* packages, so
name it the same way.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-sysv is relatively
clear, skeleton-common and skeleton-none are less clear on their
relationship to BR2_INIT_*. So rename skeleton-sysv to conform to a
clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. While skeleton-systemd is
relatively clear, skeleton-common and skeleton-none are less clear on
their relationship to BR2_INIT_*. So rename skeleton-systemd to conform
to clearer pattern.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The skeletons are based on the selection of BR2_INIT_*, so add init- to
the package name to make this clearer. The name skeleton-none implies no
skeleton at all, not a base skeleton with no init-specific files.
Signed-off-by: Cam Hutchison <camh@xdna.net>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This release contains only two real changes to fix two bugs. One is
only relevant for Windows; the other one fixes handling of empty
comment lines.
libconfuse is used by genimage, and we have one defconfig,
linksprite_pcduino, that has empty comment lines in its genimage.cfg.
Thus, it fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/27873642
While we're at it, also change the upstream URL in Config.in to github.
The old URL on nongnu was just a download directory and didn't have
anything newer than 2010, while github has a nice README.md.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Host variant is needed to generate long description
for python-automat package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Install the libraries to staging to be usable by other packages.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds libb64, a library of ANSI C routines for fast
encoding/decoding data into and from a base64-encoded format.
The package contains a static library, headers, and an executable.
The latter, however, requires C++ and offers no advantages over busybox
or coreutils base64, so it is not installed. Therefore, nothing is
installed to target.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout:
- properly wrap Config.in
- move from Crypto to Other menu
- don't install to target
- don't make headers executable
- don't add -D to install with multiple source files
- extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This reverts commit c69088b8c3, which is
no longer needed now that alsa-lib has been fixed properly.
Indeed, this commit was made because alsa-utils failed to build with:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_htimestamp':
pcm_dmix.c:(.text+0x5c0): warning:
/home/buildroot/build/instance-0/output/host/usr/xtensa-buildroot-linux-uclibc/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data.rel+0x4): undefined reference to `_snd_module_rawmidi_virt'
collect2: error: ld returned 1 exit status
Which is exactly the problem that we fixed in alsa-lib by making sure
that rawmidi_symbols.c doesn't reference symbols from rawmidi_virt.c
when SEQ support is not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit adds a patch to alsa-lib that fixes an incorrect code
dependency: some code built when MIDI support is enabled is
unconditionally referencing code that is built when SEQ support is
enabled, both options being independent.
This causes build failures such as:
/home/buildroot/buildroot-test/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libasound.a(pcm_dmix.o): In function `snd_pcm_dmix_sync_ptr':
pcm_dmix.c:(.text+0x83c): warning:
/home/buildroot/buildroot-test/instance-1/output/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libasound.a(rawmidi_symbols.o):(.data+0x4): undefined reference to `_snd_module_rawmidi_virt'
Fixes:
http://autobuild.buildroot.net/results/5964e7028c31a8f75b38a27270410f0b3c5c8422/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: add upstream link to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The beaglebone_qt5_defconfig uses an older kernel version which does not
provide a device tree for the beagle bone green.
post-image.sh now selects genimage_linux41.cfg if am335x-bonegreen.dtb is
not build and genimage.cfg otherwise.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump to 7.55.0, libcurl fails to build on a number of
uncommon architectures (ARC, OpenRISC, etc.). This is due to upstream
commit 73a2fcea0b4adea6ba342cd7ed1149782c214ae3 ("includes: remove
curl/curlbuild.h and curl/curlrules.h"), which makes libcurl rely on
more architecture-specific related defines in include/curl/system.h.
This commit therefore adds a patch that fixes the 32-bit vs. 64-bit
detection for all architecture, using gcc's __SIZEOF_LONG__
definition. It has been tested successfully with test-pkg on all 47
toolchain configurations.
Fixes:
http://autobuild.buildroot.net/results/bf26c08cf3267214278674472f931603f69951ae/
(and many similar issues)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cleanup the libcgi package,
by using https://github.com/rafaelsteil/libcgi as an upstream.
Remove old patch and use cmake to build new version.
Signed-off-by: Joe Lin <xlcwu.taiwan@gmail.com>
[Mario:
- Use github URL in Config.in
- Use upstream sha256 hash]
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
[Arnout:
- Add reference to upstream hash file
- Remove unneeded LIBCGI_SUPPORTS_IN_SOURCE_BUILD = NO]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch bumps to mono 5.0.1.1 and updates the unit tests patch
accordingly.
The latest version of mono carries a bit of changes in the monolite
package: the version string changes and from now on, monolite should
be installed in a subdirectory with the exact version string as a name.
Therefore, mono and monolite are bumped in a single commit.
Patch 0004, although applied in upstream master, is not yet in this
(stable) release.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
[Arnout: squashed the patches, removed /usr part from HOST_DIR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The linux 4.1 kernel does not compile with gcc 6.x.
The compiler version is now fixed to 5.x until a new kernel is used.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the comment that "valgrind needs shared libs" is not hidden
when the architecture dependencies are not met, which can confuse some
users (as recently seen on IRC).
Fix that by introducing the traditional _ARCH_SUPPORTS option, and have
the comment and the symbol depend on that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Brandon Maier <brandon.maier@rockwellcollins.com>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed--by: Pedro Ribeiro <pedrib@gmail.com>
Tested-by: Pedro Ribeiro <pedrib@gmail.com>
[Arnout: put _ARCH_SUPPORTS at the top of the file]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
glob: do not parse after a strtoul() overflow range (CVE-2017-1000101)
tftp: reject file name lengths that don't fit (CVE-2017-1000100)
file: output the correct buffer to the user (CVE-2017-1000099)
Switch to .tar.xz to save bandwidth.
Add reference to tarball signature.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Starting with 4.12-rc1, tarballs are generated by cgit directly from
Linus's tree. This also implies that no .tar.xz can be used for them.
This method also applies to older release candidates.
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
[Arnout: added comment in the code]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When Lua is linked with additional libraries, these libraries should go
into the pkg-config file as well.
Otherwise, linking swupdate with the lua library fails:
```
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlopen'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlclose'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlerror'
/home/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/liblua.so: undefined reference to `dlsym'
```
Fixes http://autobuild.buildroot.net/results/1c3/1c349cc5904868e4def292b9fbfa164828e46156
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This solves build failures caused by WebKit trying to include X11 headers
when support for X11 is disabled in Mesa3D. A common situation is when
configuring both GTK+ and WebKitGTK+ only with Wayland support.
Once the fix for https://bugs.webkit.org/show_bug.cgi?id=175125 makes it
into a release, the patch can be dropped.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This adds a patch to gdb 7.12 and gdb 8.x, which fixes the build on
noMMU platforms. It is not needed for older versions of gdb, since
it's related to the switch of gdb to C++ in the 7.12 release.
Fixes:
../nat/linux-ptrace.c: In function 'int linux_fork_to_function(gdb_byte*, int (*)(void*))':
../nat/linux-ptrace.c:273:29: error: invalid conversion from 'void*' to 'gdb_byte* {aka unsigned char*}' [-fpermissive]
child_stack = xmalloc (STACK_SIZE * 4);
The patch has already been merged upstream, as of commit
ffce45d2243e5f52f411e314fc4e1a69f431a81f, and will therefore be part
of future gdb releases.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes:
/tmp/output/build/glibc-2.25/build/libc_pic.a(dl-error.os): In function `__GI__dl_signal_error':
dl-error.c:(.text+0x0): multiple definition of `_dl_signal_error'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x134d8): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(dl-error.os): In function `__GI__dl_catch_error':
dl-error.c:(.text+0x190): multiple definition of `_dl_catch_error'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x136fc): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(init-first.os):(.data+0x0): multiple definition of `__libc_multiple_libcs'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.bss+0x6c): first defined here
/tmp/output/build/glibc-2.25/build/libc_pic.a(_itoa.os): In function `_itoa':
_itoa.c:(.text+0xd4): multiple definition of `_itoa'
/tmp/output/build/glibc-2.25/build/elf/dl-allobjs.os:(.text+0x133c8): first defined here
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a parameter to run-tests to act as a multiplier for all timeouts of
emulator.
It can be used to avoid sporadic failures on slow host machines as well
in elastic runners on the cloud.
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Arnout: rename multiplier to timeout_multiplier everywhere]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Removed 0003-Use-gnu-11-standard-to-prevent-errors-on-PPC.patch, since
stella now uses -std=c++14 that builds fine when using PPC altivec
vectorization.
Removed 0004-gcc7.patch, backported from upstream.
Update toolchain dependencies to gcc 4.9 since codebase now uses C++14 features.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
[Arnout: also remove 0004-gcc7.patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Switched to github helper because upstream does not provide the tarball
anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
By default, mksquashfs uses all the CPUs available, like us with
BR2_JLEVEL=0.
However, by setting BR21_JLEVEL to non-zero, a user volutarily limits
the number of jobbs allowed to run concurrently (for various reasons,
like this is not a priority task on the machine; or like the
autobuilders, to spread the load accross multiple runs without
overloading the machine).
So, propagate tthe parallelisn settings down to mksquashfs, to repect
the user's will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Tested-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gcc 7 with -Os (optimize for size) takes the liberty to remove the code
of inline functions entirely - which is indeed allowed according to the
C99 standard, cfr. this [1] very complete StackOverflow answer. This
leads to undefined function references at link time.
The proper approach is to patch the code to use 'static inline'
instead. However, for various reasons such a patch is not entirely
trivial, and upstream has not moved since 7 years, so instead take the
simpler approach of restoring the gcc original inline behaviour with
-fgnu89-inline to fix this issue.
Fixes http://autobuild.buildroot.org/results/d72/d72a7e9775a10bc884b9953dd2eba3ad32100cca
[1] https://stackoverflow.com/questions/6312597/is-inline-without-static-or-extern-ever-useful-in-c99
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This partially reverts commit cf6d321e9d.
The underlying reason for doing the checks is to ensure that a
merged-usr setting is properly enforced, even for custom skeletons.
Before that patch, a custom skeleton where both /bin and /usr/bin were
missing was accepted; but then the first package that intalled something
in /bin would create it as a directory, thus breaking the merged-usr
situation. Ditto sbin and lib, of course.
cf6d321 was created to detect that situation, and the fix was to require
that both directories do exist in the custom skeleton, so that we new
the check for consistency were OK, in all cases.
However, that broke existing skeletons which where missing both
directories, and some people are shinning about it...
The crux of the problem is that Buildroot should be responsible for
creating the directories or the symliks when they are missing, and only
fail if the existing ones are incorrect, but not impose the burden on
the user.
A situation where the problem arises is when a skeleton is shared
between various builds, some using a merged-usr while other do not.
We fix that by reverting the offending changes change, back to the
previous behaviour. We keep the stderr redirection in stat calls, and
the variable renaming.
A proper fix to create the missing directories can be added later.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gdb 7.12+ is compiled and linked with C++, therefore the thread_db
headers need to use extern "C", to be usable for C++ code.
Fixes:
Issue when building gdbserver for m68k-coldfire:
thread-db.o: In function `thread_db_init()':
thread-db.c:(.text+0x5b6): undefined reference to `td_ta_new(ps_prochandle*, td_thragent**)'
thread-db.c:(.text+0x61e): undefined reference to `td_thr_get_info(td_thrhandle const*, td_thrinfo*)'
thread-db.c:(.text+0x632): undefined reference to `td_symbol_list()'
...
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This change is fixing the bug reported in [1].
Cmake may run pkg-config to find the dependencies when configuring a
package. Because of the value of PATH, and it will use the Buildroot's
pkg-config wrapper, which, by default, is configured (via some
environment variables) to find the target dependencies.
When configuring a host package using cmake, to prevent cmake from
wrongly solving dependencies from the target tree (when the
*-config.cmake files are using pkg-config) instead of looking for them
in the Buildroot's host tree or in the host system itself, we need to
set the environment variables altering the pkg-config behavior in the
cmake configure environment.
So, this change is fixing the cmake host-packages configuration step,
by properly setting the pkg-config environment variables to their values
for finding host dependencies.
Before this patch:
make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
[...]
>>> host-mariadb 10.1.25 Configuring
(mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib"
-DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DWITH_SSL=bundled )
-- Running cmake version 3.8.2
[...]
-- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
[...]
-- Found LibXml2: /opt/br/abo/cmake-host-find-root-path/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libxml2.so (found version "2.9.4")
[...]
0
After this patch is applied:
make O=/opt/br/abo/cmake-host-find-root-path libxml2 host-mariadb{-dirclean,-configure} && echo $?
[...]
>>> host-mariadb 10.1.25 Configuring
(mkdir -p /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && cd /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ && rm -f CMakeCache.txt && PATH="/opt/br/abo/cmake-host-find-root-path/host/bin:/opt/br/abo/cmake-host-find-root-path/host/sbin:/home/sam/.local/bin:/sbin:/usr/sbin:/bin:/usr/bin" PKG_CONFIG="/opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config" PKG_CONFIG_SYSROOT_DIR="/" PKG_CONFIG_LIBDIR="/opt/br/abo/cmake-host-find-root-path/host/lib/pkgconfig:/opt/br/abo/cmake-host-find-root-path/host/share/pkgconfig" PKG_CONFIG_ALLOW_SYSTEM_CFLAGS=1 PKG_CONFIG_ALLOW_SYSTEM_LIBS=1 /usr/bin/cmake /opt/br/abo/cmake-host-find-root-path/build/host-mariadb-10.1.25/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="/opt/br/abo/cmake-host-find-root-path/host" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="/opt/br/abo/cmake-host-find-roo
t-path/host" -DCMAKE_C_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_CXX_FLAGS="-O2 -I/opt/br/abo/cmake-host-find-root-path/host/include" -DCMAKE_EXE_LINKER_FLAGS="-L/opt/br/abo/cmake-host-find-root-path/host/lib -Wl,-rpath,/opt/br/abo/cmake-host-find-root-path/host/lib" -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="/usr/bin/gcc" -DCMAKE_CXX_COMPILER="/usr/bin/g++" -DCMAKE_C_COMPILER_ARG1="" -DCMAKE_CXX_COMPILER_ARG1="" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=OFF -DWITH_SSL=bundled )
-- Running cmake version 3.8.2
[...]
-- Found PkgConfig: /opt/br/abo/cmake-host-find-root-path/host/bin/pkg-config (found version "0.28")
[...]
-- Found LibXml2: /usr/lib/libxml2.so (found version "2.9.4")
[...]
0
[1] http://lists.busybox.net/pipermail/buildroot/2017-August/199776.html
Reported-by: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: "Sigalas, Antonios (Nokia - GR/Athens)" <antonios.sigalas@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit 0e2ee0e6e8 (package.snappy: fix static builds with threads)
added LIBS=-pthread to configure options to fix static build with
threads on some architectures. This works for autotools packages. Then,
commit d26282b3aa (package/snappy: bump version, switch to cmake)
switched to cmake that does not understand the 'LIBS' parameter.
As pointed out by Thomas[1] the special handling of libpthread for
static builds is not needed anymore: it was needed only to build the
tests, and these are no longer built. Note that packages that link
statically with snappy will still need to link with -pthread. Only
two in-tree packages currently depend on snappy: lua-csnappy depends
on !BR2_STATIC_LIBS and leveldb adds -pthread from its build system.
Tested with the following musl & uclibc defconfigs which also fix build
errors:
http://autobuild.buildroot.net/results/39f/39f9fc4300ddca19e8a533765b46838003752000/http://autobuild.buildroot.net/results/886/8860b9259f7a3aecb2ddbfa787be048072bd347b/
[1] http://lists.busybox.net/pipermail/buildroot/2017-July/199549.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Baruch: improved commit message]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
[Arnout: improved commit message more, based on Yann's input]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes the following build issues:
In file included from ../sysdeps/x86_64/multiarch/varshift.c:19:0,
from ../sysdeps/i386/i686/multiarch/varshift.c:1:
../sysdeps/x86_64/multiarch/varshift.h: In function '__m128i_shift_right':
../sysdeps/x86_64/multiarch/varshift.h:26:1: error: SSE vector return without SSE enabled changes the ABI [-Werror=psabi]
{
[...]
.../lib/gcc/i686-buildroot-linux-gnu/7.1.0/include/tmmintrin.h:136:1: error: inlining failed in call to always_inline '_mm_shuffle_epi8': target specific option mismatch
The patch has been taken from glibc's patchwork at
https://patchwork.sourceware.org/patch/21003/.
Fixes bug #10156.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Versions older than Linux v3.7 do not support the aarch64 architecture
so disable them, for reference see https://kernelnewbies.org/Linux_3.7
Without this patch these defconfigs fail to build
BR2_aarch64=y
BR2_KERNEL_HEADERS_3_2=y
BR2_aarch64=y
BR2_KERNEL_HEADERS_3_4=y
with error messages like this:
make[1]: Entering directory '/home/buildroot/br5_next/output/build/linux-headers-3.2.89'
Makefile:567: /home/buildroot/br5_next/output/build/linux-headers-3.2.89/arch/arm64/Makefile: No such file or directory
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This fixes '__multi3' issue when building the kernel.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
With binutils 2.29 a runtime error is seen:
Kernel panic - not syncing: Attempted to kill init! exitcode=0x00000100
Backport upstream patch to fix the issue.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We don't add a full stop at the end of the prompt text.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes [1]:
make[1]: Entering directory '.../build/qt5base-5.9.1/examples/opengl'
cd hellowindow/ && ( test -e Makefile || .../build/qt5base-5.9.1/bin/qmake -o Makefile .../build/qt5base-5.9.1/examples/opengl/hellowindow/hellowindow.pro ) && make -f Makefile
make[2]: Entering directory '.../build/qt5base-5.9.1/examples/opengl/hellowindow'
.../host/bin/sparc-linux-g++ -c -pipe -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os --sysroot=.../host/sparc-buildroot-linux-uclibc/sysroot -O2 -O3 -fno-exceptions -Wall -W -D_REENTRANT -fPIC -DQT_NO_EXCEPTIONS -D_LARGEFILE64_SOURCE -D_LARGEFILE_SOURCE -DQT_NO_DEBUG -DQT_GUI_LIB -DQT_CORE_LIB -I. -I../../../include/QtGui/5.9.1 -I../../../include/QtGui/5.9.1/QtGui -I../../../include -I../../../include/QtGui -I../../../include/QtCore/5.9.1 -I../../../include/QtCore/5.9.1/QtCore -I../../../include/QtCore -I.moc -I../../../mkspecs/devices/linux-buildroot-g++ -o .obj/hellowindow.o hellowindow.cpp
In file included from hellowindow.cpp:51:0:
hellowindow.h:96:5: error: ‘QOpenGLShaderProgram’ does not name a type
QOpenGLShaderProgram *m_program;
^~~~~~~~~~~~~~~~~~~~
hellowindow.h:97:5: error: ‘QOpenGLBuffer’ does not name a type
QOpenGLBuffer m_vbo;
^~~~~~~~~~~~~
hellowindow.cpp: In constructor ‘Renderer::Renderer(const QSurfaceFormat&, Renderer*, QScreen*)’:
hellowindow.cpp:62:40: error: invalid use of incomplete type ‘class QOpenGLContext’
m_context = new QOpenGLContext(this);
^
In file included from ../../../include/QtGui/qsurfaceformat.h:1:0,
from ../../../include/QtGui/../../src/gui/kernel/qsurface.h:45,
from ../../../include/QtGui/qsurface.h:1,
from ../../../include/QtGui/../../src/gui/kernel/qwindow.h:51,
from ../../../include/QtGui/qwindow.h:1,
from ../../../include/QtGui/QWindow:1,
from hellowindow.h:51,
from hellowindow.cpp:51:
[1] http://autobuild.buildroot.net/results/001/001bc930014fca8c2a8b7a390350b4e1a15fa375/build-end.log
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This version is compatible with LibreSSL.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following build failure, which occurs on all architectures:
/tmp/cc6APNmN.s: Assembler messages:
/tmp/cc6APNmN.s: Error: `loc1@GLIBC_2.17' can't be versioned to common symbol 'loc1'
/tmp/cc6APNmN.s: Error: `loc2@GLIBC_2.17' can't be versioned to common symbol 'loc2'
/tmp/cc6APNmN.s: Error: `locs@GLIBC_2.17' can't be versioned to common symbol 'locs'
../o-iterator.mk:9: recipe for target '/tmp/output/build/glibc-2.25/build/misc/regexp.os' failed
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Microblaze support was never upstreamed in gdb. We currently use a gdb
from the Xilinx Github repository, but this gdb is based on 7.6, and
has never been updated in the last 4 years. There are no other active
branches at https://github.com/Xilinx/gdb/branches.
Xilinx has a slightly newer gdb, based on 7.7, available at
https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb. However,
it's apparently only available in the form of stack of big patches
(https://github.com/Xilinx/meta-xilinx/tree/master/recipes-microblaze/gdb/files).
Currently, gdb on Microblaze fails to build in various conditions:
* Against glibc, with "error: conflicting types for 'ps_lgetfpregs'"
* Against musl, with "error: unknown type name 'elf_gregset_t'"
While those issues can probably be fixed, the fact that there is no
active upstream significantly reduces the incentive to fix those
problems.
Therefore, let's drop support for gdb on Microblaze entirely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
After c0ad6ded01 expat: security bump to version 2.2.1
the system can hang on startup under certain circumstances.
This happens when:
* we use systemd as init system
* the random nonblocking pool takes a while to initialize
* this apparently doesn't happen on qemu, so this would not have
been caught by the runtime testing infrastructure
* it also doesn't seem to happen when network booting
For a more detailed description of the bug see here:
https://bugs.freedesktop.org/show_bug.cgi?id=101858
The patch should be in next dbus version 1.10.24
Set DBUS_AUTORECONF = YES because configure.ac is changed.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
[Arnout: add upstream commit sha + Marcus's Sob to the patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The azmq library provides Boost Asio style bindings for ZeroMQ. This
library is built on top of ZeroMQ's standard C interface and is intended
to work well with C++ applications which use the Boost libraries in
general, and Asio in particular.
Signed-off-by: RJ Ascani <rj.ascani@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Using the package instrumentation hooks, a file packages-file-list.txt is
created containing the list of files installed by a package with their size.
Due to the use of 'find -type f', symbolic links to files are not included
in this file list. Since the original purpose of this file was to calculate
the total size of a package and symbolic links have file size 0, this was
not a problem.
However, if packages-file-list.txt is reused for other purposes, for example
to get a complete list of files installed by a package regardless of size,
symbolic links to files are important too.
Likewise, to get a complete view of what a package installs, directories
should be included too.
Update the instrumentation hook accordingly.
Although for files an md5sum is taken, we cannot do this for directories.
Instead, mimic the output of md5sum with a fake hash string.
Note: for directories that are used by several packages, e.g. /etc/init.d/,
the package that created the directory will be treated as the 'owner' of
that directory. This gives a somewhat distorted view of ownership.
Similarly, the package size reported by 'make graph-size' (based on
packages-file-list.txt) will include the 'size' of a directory for that
owner, which is reported as e.g. 4096 bytes.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Before and after the building of each package, the instrumentation hooks are
run. One of these hooks obtains the list of files installed by a package.
The code to obtain this list is currently duplicated in the start and end
part of the hook. While the amount of duplication is currently small, a
subsequent patch will make more changes to this code, increasing the
duplication.
Therefore, split off into a helper function.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
QtWayland is a Qt 5 module that wraps the functionality of Wayland.
Cc: Julien Corjon <corjon.j@ecagroup.com>
Cc: Brent Sink <brents_3@hotmail.com>
Cc: Naoki Matsumoto <n-matsumoto@melcoinc.co.jp>
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
[Arnout:
- select wayland instead of depending on it;
- propagate jscore dependency from qt5declarative
- re-order select/depends statements
- rewrite comment to only refer to GL backend (jscore is an arch
dependency)
- rewrap help text of BR2_PACKAGE_QT5WAYLAND_COMPOSITOR]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Introduce imx6q-sabresd_qt5_defconfig that supports the opensource
Etnaviv graphical stack.
This defconfig provides a way to quickly test some graphical applications,
such as kmscube, qt5, glmark2.
Currently kernel mainline exhibits issues when running cpufreq as ondemand
governor on mx6, so add a linux fragment that disables such option for the
time being.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
[Arnout:
- Add Fabio to DEVELOPERS
- Rename linux config fragment to linux_qt5.fragment
- Add comment to linux_qt5.fragment why it is needed
- Add explicit CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y to it
- Reorder defconfig entries to they match imx6q-sabresd_defconfig
- Remove strace and host-uboot-tools, neither seems to be needed
- Drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED, it no longer exists
- Replace BR2_TARGET_ROOTFS_EXT2_BLOCKS with BR2_TARGET_ROOTFS_EXT2_SIZE
- Regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
For the autoconf-based build system it was necessary to allow each
supported architecture separatly:
https://github.com/xbmc/xbmc/blob/Krypton/m4/xbmc_arch.m4
For the CMake build system this is not necessary anymore so we only
blacklist archs in Config.in known to be broken.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: slightly tweak the BR2_PACKAGE_KODI_ARCH_SUPPORTS definition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Other changes:
- Removed the following patches due to being merged upstream:
- resolved-bugfix-of-null-pointer-p-question-dereferencing.patch
- resolved-simplify-alloc-size-calculation.patch
- resolved-do-not-allocate-packets-with-minimum-size.patch
- Updated the following patches to work with 234:
- fix-getty-unit.patch
- build-check-for-ln-relative.patch
- fix-am-path-libgcrypt-no-found.patch
- Updated ordering of remaining patches.
- Reformatted remaining patches as git style patches.
- Updated Upstream-Status comment in "build-check-for-ln-relative.patch" to
"Denied [No desire to support building on old distributions]"
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Tested-by: Marcus Hoffmann <m.hoffmann@caretelsol.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Section sorting code in xtensa ld was incorrectly cleaned up in release
2.29, resulting in the following assertion when --sort-section,alignment
option is used:
BFD (GNU Binutils) 2.29 assertion fail elf32-xtensa.c:3965
Backport the fix that restores original section sorting.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some xtensa configurations there may be system/user registers in
xtensa-modules with negative index. ISA initialization for such config
may clobber heap and result in program termination.
Don't update lookup table entries for register with negative indices.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This host-only package was used to enable graphite support in GCC 4.9,
but Buildroot no longer supports Graphite optimizations in GCC 4.9
(only GCC >= 5.x is supported). Therefore, we can remove the cloog
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we no longer support Graphite optimizations in gcc 4.9 (which
required ISL 0.14.1), we can bump ISL to a newer version, which allows
to support Graphite optimizations in GCC >= 5.x.
The comment about the version being limited to 0.14.1 because of cloog
is no longer relevant, so it is removed.
Our libtool patch now applies properly, so we can remove
ISL_LIBTOOL_PATCH = NO.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas:
- remove ISL_LIBTOOL_PATCH = NO
- improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC 4.9.x requires an old version of ISL to support graphite, and this
old version of ISL is not sufficient to support graphite in modern GCC
versions.
Since GCC 4.9.x is getting older, and to keep things simple, we stop
supporting graphite on old GCC < 5.x. This way, we will be able to
bump ISL to a version that is suitable for modern GCC versions.
In addition, this allows to drop the dependency on cloog, which was
only needed for GCC 4.9.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We add the 3 following combinations:
- basic systemd, read-only, network w/ ifupdown
- basic systemd, read-only, network w/ networkd
- full systemd, read-only, network w/ networkd
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: regenerate .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the rootfs is readonly, systemd will expect /var to be writable.
Because we do not really have a R/W filesystem to mount on /var, we make
it a tmpfs [*], and use the systemd-tmpfiles feature to populate it with
"factory" defaults.
We obtain those factory defaults by redirecting /var to that location at
build time, using a symlink /var -> /usr/share/factory which is the
location in which systemd-tmpfiles will look for when instructed to
"recursively copy" a directory.
With a line like:
C /var/something - - - -
it will look for /usr/share/factory/something and copy it (recursively
if it is a directory) to /var/something, but only if it does not already
exist there.
We also mark this copy with the exclamation mark, as it is only safe to
copy on boot, not when changing targets.
To be noted: the real format for such lines are:
C /var/something - - - - /from/where/to/copy/something
But if the source is not given, then it is implicitly taken from
/usr/share/factory (which in our case is as-good a location as whatever
else, so we use it, and thus we need not specify the source of the
copy).
Note that we treat symlinks a little bit specially, by creating symlinks
to the factory defaults rather than copying them.
Finally, /var at build time is a symlink, but at runtime, it must be a
directory (so we can mount the tmpfs over there). We can't change that
as a target-finalize hook, because:
- some packages may want to set ownership and/or access rights on
files or directories in /var, and that only happens while assembling
the filesystem images; changing /var from a symlink to a (then
empty) directory would break this;
- /var would be a directory on sub-sequent builds (until the next
"make clean").
Instead, we use the newly-introduce pre- and post-rootfs command hooks,
to turn /var into a directory before assembling the image, and back to a
symlink after assembling the image.
[*] People who want the factory-defaults only on first boot will have
to tweak the fstab to mount something else than a tmpfs on /var.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, the directory structure we want in the filesystem is not
exactly what we have in target/
For example, when systemd is used on a read-only rootfs, /var must be a
tmpfs. However, we may have packages that install stuff in there, and
set important rights (via the permission-table). So, at build time, we
need /var to be a symlink to the remanent location (/usr/share/factory)
while at runtime we need /var to be a directory.
One option would have been to have /var as a real directory even during
build time, and in a target-finalize hook, move everything out of there
and into the "factory" location. However, that's not possible because
it's too early: some packages may want to set ownership and/or acces
rights on directories or files in /var, and this is only done in the
fakeroot script, which is called only later during the assembling of the
filesystem images.
Also, there would have been no way to undo the tweak (i.e. we need to
restore the /var symlink so that subsequent builds continue to work) if
it were done as a target-finalize hook.
The only solution is to allow packages to register pre- and post-hooks
that are called right before and right after the rootfs commands are
executed, and inside in the fakeroot script.
We can however not re-use the BR2_ROOTFS_POST_FAKEROOT_SCRIPT feature
either because it is done before the filesystem command, but there is
nothing that is done after. Also, we don't want to add to, and modify a
user-supplied variable.
So, we introduce two new variables that packages can set to add the
commands they need to run to tweak the filesystem right at the last
moment.
Those hooks are not documented on-purpose; they are probably going to
only ever be used by systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For systemd, we create a simple /etc/fstab with only an entry for /, as
systemd otherwise automatically mounts what it needs where it needs it.
systemd does not like that the content of /var be symlinks to /tmp,
especially journald that starts before /tmp is mounted, and thus the
journal files are hidden from view, which causes quite a bit of fuss...
Instead, move the current /var to a sysv-only skeleton.
systemd at install time will create the /var content it needs, so we
just create an empty /var for systemd.
systemd would create /home and /srv at runtime if they are missing, but
it is better to create them right now, to simplify supporting systemd on
a RO filesystem in the (near) future.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we use the same skeleton for sysv-like init systems and
systemd, even though systemd has some peculiarities that makes our
default skeleton unfit.
So, we'll need to provide different skeletons (really, only part of
it) for sysv-like and systemd. In addition, in order to support the
"no init system" (BR2_INIT_NONE) use case, we introduce a "none"
skeleton.
Introduce three new skeleton packages, aptly named skeleton-sysv,
skeleton-systemd and skeleton-none. All three are providers of the
skeleton virtual package, in lieu of the skeleton-common package,
which is now a simple dependency of all three new skeletons.
Those packages are empty for now. In followup changes:
- sysv-specific stuff will be moved out of skeleton-common and into
skeleton-sysv;
- systemd-specific stuff will be added to skeleton-systemd.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- merge with the patch that enables the BR2_INIT_NONE case
- simplify the BR2_PACKAGE_SKELETON_COMMON_ONLY select logic]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- remove the BR2_PACKAGE_SKELETON_COMMON_ONLY logic, and instead
introduce a separate skeleton-none package for the BR2_INIT_NONE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't really care what's going in staging, as long as it is properly
setup for merged/non-merged /usr, especially for the lib/ directory.
So we can just copy the skeleton as-is.
This simplifies maintenance, should we ever need to tweak the layout:
we'd just have to do it once in the skeleton directory to have it
propagated to both target and staging.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have two packages that can act as a skeleton, skeleton-common,
also known as our default skeleton, and skeleton-custom.
This means that the skeleton package can be a standard virtual package
now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package variables should always be prefixed with the package name. For
SKELETON_COMMON_ROOT_PASSWORD, this means we set the variable a second
time based on the value it previously had. Fortunately, this is fine
for make, even for recursively expanded variables.
This also allows to simplify the condition of the empty password - it's
not needed to set it again to empty if it already was empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all the handling of the default skeleton into a new package,
skeleton-common.
We don't name it skeleton-default, because it will be further split
later, into a skeleton for sysv and another for systemd, with some parts
still common between the two. So just name it skeleton-common right now;
this will save us a rename later.
While we're at it, also assign to SKELETON_COMMON_TARGET_FINALIZE_HOOKS
instead of directly to the global FINALIZE_HOOKS. Therefore, we don't
need to do all of that in a condition BR2_PACKAGE_SKELETON_COMMON==y.
Note: it would be technically sound to move the skeleton files together
within a sub-directory of the skeleton-common package. However, we refer
the user to those files, from various locations (manual, packages). It
will indeed be easier for the user to find those files in
system/skeleton/ rather than in package/skeleton-common/skeleton/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: remove the mkdir $(STAGING_DIR)/usr/include which was removed
in skeleton.mk in master.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For target install, we don't need to check the merged-usr symlinks
any more, it was already checked before.
For staging, instead of creating directories, just copy the same
skeleton, which was already checked to be correct.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to checking the symlinks in the merged usr case, also check
whether /bin, /lib, /sbin and their /usr/... counterparts exist in the
non-merged case.
Missing directories are collected in the variable
SKELETON_CUSTOM_MISSING_DIRS. For symmetry and because it's more
logical, rename SKELETON_CUSTOM_NOT_MERGED_USR to
SKELETON_CUSTOM_NOT_MERGED_USR_DIRS.
When a directory is indeed missing, "stat" will print an error.
Buildroot *also* prints an error, which is clearer. So remove the error
from stat by redirecting it to /dev/null.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
skeleton-custom.mk contains a huge condition for BR_BUILDING and for
BR2_ROOTFS_MERGED_USR. This makes the code difficult to follow, so
rework the condition a bit so that only the parts that really need to
be conditional are indeed conditional.
Note that there is no overhead in needlessly evaluation the "stat"
commands. Indeed, the assignments use late evaluation so the "stat"
is only executed when evaluating the condition - when skeleton-custom
is not selected, stat is never called.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch + wrote commit message]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the custom skeleton, we practicaly do nothing, except ensure it
contains the basic, required directories, and that those are properly
setup wrt. merged /usr.
Furthermore, our current skeleton is not fit for systemd, and we'll
have to split things out into various skeletons.
So, off-load the custom skeleton into its own package.
Thus, the existing skeleton package is now limited to:
- when using our default skeleton, install and tweak it properly;
- when using a custom skeleton, do nothing except for depending on
the skeleton-custom package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout: split off in a separate patch doing only this]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "builtin" kernel does not boot a systemd-based system, so
we resort to building the same one as currently used by our
qemu_arm_vexpress_defconfig.
We test the 8 following combinations:
- busybox, read-only, without network
- busybox, read-only, with network
- busybox, read-write, without network
- busybox, read-write, with network
- basic systemd, read-write, network w/ ifupdown
- basic systemd, read-write, network w/ networkd
- full systemd, read-write, network w/ networkd
- no init system, read-only, without network
The tests just verify what the /sbin/init binary is, and that we were
able to grab an IP address. More tests can be added later, for example
to check each systemd features (journal, tmpfiles...)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: update .gitlab-ci.yml]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
samba4 picks up dbus as dependency if it was built before:
Checking for dbus : yes
Checking for header dbus/dbus.h : yes
Checking for library dbus-1 : yes
There is no configure option to control dbus support so we just make
sure dbus is built before samba4 to have reproducible builds.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch allows building samba4 with uClibc again after rpc support
was removed from uClibc. Building with musl is still broken:
The first error
../nsswitch/wins.c: In function ‘_nss_wins_gethostbyname_r’:
../nsswitch/wins.c:272:15: error: ‘NETDB_INTERNAL’ undeclared (first use in this function)
*h_errnop = NETDB_INTERNAL;
^~~~~~~~~~~~~~
../nsswitch/wins.c:272:15: note: each undeclared identifier is reported only once for each function it appears in
../nsswitch/wins.c:349:14: error: ‘NETDB_SUCCESS’ undeclared (first use in this function)
*h_errnop = NETDB_SUCCESS;
^~~~~~~~~~~~~
could be solved by applying
https://git.alpinelinux.org/cgit/aports/tree/main/samba/netdb-defines.patch
but then the build fails at
../ctdb/tests/src/test_mutex_raw.c: In function ‘main’:
../ctdb/tests/src/test_mutex_raw.c:170:28: error: ‘pthread_mutex_t {aka struct <anonymous>}’ has no member named ‘__data’
printf("pid=%u\n", mutex->__data.__owner);
^~
Therefore we disable musl support until a fix can be found.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas:
- instead of setting SAMBA4_CONF_ENV within the libtirpc condition,
introduce SAMBA4_CFLAGS and SAMBA4_LDFLAGS variables and use them
- add missing dependency on host-pkgconf, needed because we call
pkg-config to get the flags from libtirpc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been introduced, and we have moved to
2.28.1 as the default version, it is time to drop support for binutils
2.26.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that binutils 2.29 has been released, it is time to move to
binutils 2.28.x as the default binutils version, instead of 2.27.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both our target and host gdb depend on ncurses (host-ncurses for
host-gdb, of course). However, while for the target we passs
--with-curses, we are not doing this for the host variant. Due to
this, host-gdb default to using the termcap library: if such a library
is available on the build system, it will be used instead of the
host-ncurses we have built. This causes the host gdb binary to depend
on a library that we do not provide in $(HOST_DIR), breaking the
principle of a standalone SDK (which should only depend on the C
library).
To solve this, we simply pass --with-curses in HOST_GDB_CONF_OPTS,
which forces host-gdb to use the host-ncurses library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
UTF-8 formatted file breaks installations on some systems:
Traceback (most recent call last):
File "setup.py", line 34, in <module>
long_description=open('README.rst').read() + '\n\n' + open('HISTORY.rst').read(),
File "/home/peko/autobuild/instance-1/output/target/usr/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xc2 in position 1125: ordinal not in range(128)
This patch replaces '§' with 'S' meaning 'Section' and hence converts file to plain ASCII.
Fixes:
http://autobuild.buildroot.net/results/4189b2ddcd3d59c629af78e4d455a29c77f8c683/
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add autobuilder reference.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Our current skeleton is tailored to sysv-like init systems; it is not
fit for systemd-based systems. So, in upcoming changes, we'll add
another skeleton for systemd.
This means we can no longer have the current skeleton default to 'y', or
it would be enabled also for systemd, which would be incorrect.
So, we remove the default to 'y' but have it selected by the default
skeleton choice.
However, we do not yet have a way to directly build (really, install)
the custom skeleton, it is built (really, installed) as a dependency of
the default skeleton. So we must also forcibly select the default
skeleton when using a custom one.
Until we have the means to do only one or the other; i.e. when we have a
virtual skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Setting the root pasword is done in a target-finalize hook, so we do not
need to enforce a dependency from the skeleton onto host-mkpasswd.
Dropping that dependency will simplify making skeleton a virtual
package (in up-coming changes).
Instead, it is now selected as any other package. As such, it is
guaranteed to be built before target-finalize.
This however introduces a slight change in behaviour: previously,
host-mkpasswd would only be built if we needed to hash the root password
from its plain-text value. Now, host-mkpasswd is always built as soon as
the root password is non-empty, even if already pre-hashed.
Since host-mkpasswd is a really tiny weeny package bundled in Buildroot,
with only two C files, built as a single unit with a single gcc call,
the overhead is really minimal. Compared to the simplifications this
will allow in the skeleton packages (plural: common, sysv, systemd,
custom) to come, this overhead is acceptable.
Yet another simplification, even if small, to ease providing multiple
skeletons.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the password generation as a post build step.
This prepares the option to remove the admin panel from
installation.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 0.6, libcodec2 switched buildsystem from autotools to
cmake.
The patches in the libcodec2 directory were removed because they were
only relevant to the autotools build, but another patch was added to
fix the codec2.pc file being installed.
For the cmake package unittests are disabled by default. The download
site is changed to http://files.freedv.org/codec2. An option is added
to be able to install examples to target.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[Thomas: switch to 0.7, add patch to fix .pc file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All patches from binutils 2.28 are kept, except patch
0906-microblaze-pr21180.patch, because it has been merged upstream as
of commit bd757ca7bf5886a4025ca02093fca1b8c5ce11a2. Other patches are
slightly adapted to differences that appeared in binutils 2.29.
The patches are now all Git formatted, so instead of having weird
sequence numbers, they have normal sequence numbers starting from 0001
and incrementing.
Since binutils 2.29 is now available as a .tar.xz tarball, we use this
format instead of .bz2 used for previous versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
binutils 2.28.1 is a bug-fix release of the 2.28.x branch, so let's
switch to it.
Since a xz-compressed tarball is available, we use it instead of the
bz2-compressed one.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default audio backend for qemu is configured at compile time. It
generates annoying warning messages to qemu's stderr when running our
tests, like these:
pulseaudio: set_sink_input_volume() failed
pulseaudio: Reason: Invalid argument
pulseaudio: set_sink_input_mute() failed
pulseaudio: Reason: Invalid argument
Explicitly set the audio backend to "none" at runtime to remove those
messages from our logs. There is no command line argument for this, so
use an environment variable when starting qemu.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes when a test fails in a gitlab pipeline the reason of the
failure cannot be determined using only the logfile.
Add the modified rootfs as an artifact of the job to improve
troubleshooting. To accomplish this, always use -k option from the test
infra, unconditionally add the resulting images to the artifacts, and
let the runner do the cleanup for us.
These artifacts can also be useful when a test fails locally but pass at
gitlab runners.
When the test does not generate a image, this message is displayed in
the runner log:
WARNING: test-output/*/images/*: no matching files
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream switched to CMake, host-pkgconf is not needed anymore.
Instead of using the latest release 1.1.6 we use current git HEAD
because it contains important patches:
"Support both static and shared library CMake builds."
c756f7f5d9
"Redo CMake configuration", this commit allows to disable building
Snappy's own tests.
be6dc3db83
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
lib in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter l in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter k in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter j in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter i in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter h in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter g in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter f in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter e in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Busybox 1.17.1 has added built-in TLS support. Unfortunately, it fails
to build on i686 with gcc 4.8, with:
networking/tls_pstm_mul_comba.c: In function 'pstm_mul_comba':
networking/tls_pstm_mul_comba.c:82:1: error: 'asm' operand has impossible constraints
asm( \
^
networking/tls_pstm_mul_comba.c:279:4: note: in expansion of macro 'MULADD'
MULADD(*tmpx++, *tmpy--);
^
make[3]: *** [networking/tls_pstm_mul_comba.o] Error 1
make[2]: *** [networking] Error 2
Since TLS support is a new feature in 1.27, and wasn't present until
now, let's disable it to avoid the build failure.
The bug has been reported upstream at
http://lists.busybox.net/pipermail/busybox/2017-July/085713.html.
Fixes:
http://autobuild.buildroot.net/results/d973f9a2fbf0f52104f4943b902183e9dbf163a7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Detecting the boost program_options library is broken:
checking for the Boost program_options library... no
configure: error: cannot find the flags to link with Boost program_options
config.log shows the reason, libatomic is missing:
conftest.o: In function `boost::detail::sp_counted_base::release()':
conftest.cpp:(.text._ZN5boost6detail15sp_counted_base7releaseEv[_ZN5boost6detail15sp_counted_base7releaseEv]+0xc):
undefined reference to `__atomic_fetch_sub_4'
conftest.cpp:(.text._ZN5boost6detail15sp_counted_base7releaseEv[_ZN5boost6detail15sp_counted_base7releaseEv]+0x38):
undefined reference to `__atomic_fetch_sub_4'
/home/buildroot/br4/output/host/sparc-buildroot-linux-uclibc/sysroot/usr/lib/libboost_program_options.so:
undefined reference to `__atomic_fetch_add_4'
Please note that using LIBS=-latomic is not enough, although it fixes
the configure check the bug reoccurs when linking cc-tool:
CXXLD cc-tool
src/application/cc_flasher.o: In function `boost::detail::sp_counted_base::weak_release()':
cc_flasher.cpp:(.text._ZN5boost6detail15sp_counted_base12weak_releaseEv[_ZN5boost6detail15sp_counted_base12weak_releaseEv]+0xc):
undefined reference to `__atomic_fetch_sub_4'
We need to add -latomic to CXXFLAGS to both fix configure and linking.
Fixes
http://autobuild.buildroot.net/results/596/596f97364bb2c7598b0646da8160939356f0d2c6/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When we have multiple versions for a package, and the licensing terms
depend on the version actually selected (e.g. like Qt5), storing the
hashes for those license files in the .hash file is broken: the infra
will ensure that all hashes for a file do match, which would not be the
case here.
We fix that by first looking for a hash file in the version sub-dir
first, and if that does not exist, then we use the main hash file.
Drop the useless intermediate variable 'ret'.
Update the documentation accordingly.
Reported-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Drop patch 0002-column-fix-compilation-when-libc-lacks-wide-characte.patch
as it has been applied upstream
- Patch 0001-Revert-build-sys-ncurses-headers-cleanup.patch is still
required to fix ncursesw support.
Signed-off-by: Marcus Hoffmann <m.hoffmann@cartelsol.com>
Cc: "Carlos Santos" <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition, update busybox-minimal.config and busybox.config by loading the
config files and saving them back.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain configuration used by the autobuilders to test the
internal toolchain backend on ARM contains an option that no longer
exists: BR2_UCLIBC_VERSION_NG. This option has been removed since
uClibc-ng has been made the one and only uClibc version supported.
Due to this option no longer existing, this toolchain configuration
was in fact never used, because the randgenconfig script validates
that a toolchain configuration is valid by checking that all lines are
still present in the final .config.
Therefore, this commit removes the bogus option, which will make sure
this toolchain config gets used again by our autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When testing a package with test-pkg, it may be useful to override the
set of toolchains used. For example:
- to test with toolchains used in your company;
- to test against a subset that is known to be problematic;
- to use only toolchains you already have available locally when you
have no network access.
Add an option to use an alternate CSV file containing the config
fragments of toolchains to try.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apparently the service identify code requires the python attrs
to be availabe:
Traceback (most recent call last):
File "/opt/exablox/bin/configsrv", line 5, in <module>
from pkg_resources import load_entry_point
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3138, in <module>
@_call_aside
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3124, in _call_aside
f(*args, **kwargs)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3151, in _initialize_master_working_set
working_set = WorkingSet._build_master()
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 661, in _build_master
ws.require(__requires__)
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 962, in require
needed = self.resolve(parse_requirements(requirements))
File "/usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 849, in resolve
raise DistributionNotFound(req, requirers)
pkg_resources.DistributionNotFound: The 'attrs' distribution was not found and is required by service-identity
Signed-off-by: Charles Hardin <ckhardin@exablox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If building Xen and not using glibc (using musl for example) the QEMU
project inside of Xen fails to build as it relys on the XATTR_SIZE_MAX
macro which is defined in <linux/limits.h>.
Glibc includes this header indirectly but as that is not part of the
POSIX standard other libraries don't neccessearily have this. To fix the
issue we explicitly include <linux/limits.h> to ensure the build works
for all libc libraries.
Fixes:
http://autobuild.buildroot.net/results/bb1/bb1310eb1464d880a357ae5e491fd168361d25a0
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two added patches allow building WebKitGTK+ when the compiler
scpecifically targets ARMv8-A, and reports as such be pre-defining
__ARCH_ARM_8A__ instead of just __ARCH_ARM_8__. Both patches were
pulled from the corresponding upstream bug reports and edited to
remove the conflicting parts which edit the ChangeLog files.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Both patches applied upstream.
The release contains mostly bugfixes and a basic sparc64
port. As the sparc64 port only contains support for static
binaries, it will be not enabled in buildroot yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ICU depends on BR2_HOST_GCC_AT_LEAST_4_8 and
BR2_TOOLCHAIN_GCC_AT_LEAST_4_8, these dependencies are propagated to
qt5webkit but were not propagated to qt-webkit-kiosk.
Fixes [1]:
The WebKit build was disabled for the following reasons:
* ICU is required.
[...]
cp -dpf .../host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libQt5WebKit*.so.* .../target/usr/lib
cp: cannot stat `.../host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libQt5WebKit*.so.*': No such file or directory
[1] http://autobuild.buildroot.net/results/2f3/2f381967c82775ad911a246a9607034ef489c1ce
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- rewrap commit message
- fix spelling mistakes in commit message
- reformulate the dependency comments]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Other changes:
- Refresh 0001-misc.patch to work with 1.0.17.
- Reformat 0001-misc.patch to git style patch.
- Rename 0001-misc.patch to 0001-misc-fixes-from-archlinux.patch.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
On Fedora26, openssl 1.1.x is included by default. This causes build
errors when building the host variant of mariadb.
Adding -DWITH_SSL=bundled fixes this issue.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
CVE-2017-7018 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7030 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7034 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7037 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7039 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7046 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7048 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7055 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7056 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7061 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
tvOS before 10.2.2 is affected. The issue involves the "WebKit" component.
It allows remote attackers to execute arbitrary code or cause a denial of
service (memory corruption and application crash) via a crafted web site.
CVE-2017-7064 - An issue was discovered in certain Apple products. iOS
before 10.3.3 is affected. Safari before 10.1.2 is affected. iCloud before
6.2.2 on Windows is affected. iTunes before 12.6.2 on Windows is affected.
The issue involves the "WebKit" component. It allows attackers to bypass
intended memory-read restrictions via a crafted app.
For more details, see the announcement:
https://webkitgtk.org/2017/07/24/webkitgtk2.16.6-released.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Adrian Perez de Castro" <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've had this mkdir, in various forms, for aeons. It dates back to
the inception of Buildroot, at the dawn of ages, when the toolchain
support was still nascent. Evolution had it morph from /include, to
a tuple-prefixed directory and a symlink there-to, then back to the
/include directory, to the final /usr/include directory we've had
for the last 9 years.
Anything that wants to install headers is supposed to be creating
that directory beforehand; we don't need this legacy mkdir now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since we now request that the user sets the exact size of the ext2/3/4
filesystem, we've had quite a few users wondering what was going on when
they enable too much and the default 60M are no longer enough.
When mkfs.ext2 fails, print a hint that the user should check the size
setting.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[Arnout: Add *** and redirect to stderr]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
When the ICU package is enabled (BR2_PACKAGE_ICU=y) but ICU support in
cppcms is disabled (BR2_PACKAGE_CPPCMS_ICU is disabled), cppcms still
detects ICU, but it fails to build since we don't get the proper ICU
CXXFLAGS.
In addition, this is not the intended behavior: when
BR2_PACKAGE_CPPCMS_ICU is disabled, we expect cppcms to be built
without ICU support.
To achieve this, we pass -DDISABLE_ICU_LOCALE=ON when
BR2_PACKAGE_CPPCMS_ICU is disabled (yes DISABLE_ICU_LOCALE means the
logic is inverted).
While at it, we pass DISABLE_ICU_LOCALE=OFF when ICU support is
enabled, and not DISABLE_ICONV=ON. The latter has been passed in this
condition since the cppcms package was introduced in Buildroot, but it
doesn't seem to make sense.
Fixes:
http://autobuild.buildroot.net/results/b6a8c7000c5742efc9d8e13507dab86e36b62840/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since we introduced the support for building Busybox as individual
binaries, Busybox started failing to build on SPARC/SPARC64 with this
feature enabled:
appletlib.c:(.text.find_applet_by_name+0x14): relocation truncated to fit: R_SPARC_GOT13 against symbol `applet_nameofs' defined in .rodata.applet_nameofs section in libbb/lib.a(appletlib.o)
appletlib.c:(.text.find_applet_by_name+0x18): relocation truncated to fit: R_SPARC_GOT13 against symbol `applet_names' defined in .rodata.applet_names section in libbb/lib.a(appletlib.o)
[...]
This commit adds two patches to Busybox to fix this issue, by adding
-fPIC to CFLAGS when building on SPARC/SPARC64. The patches have been
submitted upstream.
Fixes:
http://autobuild.buildroot.net/results/90144369ccea8c41ec7643a79a7ebfaa9b7db95c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is used by Kconfig's merge_config.sh.
No alldefpackageconfig is added, since it's rather pointless: it would
only enable busybox.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules for the *config targets are all very similar, so factor them
together using $@.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This column is not used by either genrandconfig or test-pkg, so remove
it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
The --toolchains-url option is renamed to --toolchains-csv.
The paths in the toolchains_csv file should be either absolute, or
relative to buildrootdir.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-csv", kwargs['toolchains_csv']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now we have the toolchain config fragments in the buildroot directory
itself, it is no longer necessary to fetch it from the toolchain URL.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently have a list of toolchain configurations that are used by
the autobuilders at [1]. However, this makes it a little more difficult
for people to use these configurations, and also to have a different
list of configurations for different branches. For example if a new
architecture is introduced, the 2017.02.x branch doesn't have support
for this architecture yet so it shouldn't try to run those configs.
Therefore, include the autobuild config fragments directly in Buildroot,
so they can be branched together with the rest. We create a new
directory under support/ to store them.
Generated with
wget -nd --no-parent --recursive http://autobuild.buildroot.net/toolchains/configs/
The index.html file is removed.
The toolchain-configs.csv file is adapted so the URLs become relative
paths pointing to the config fragments.
[1] http://autobuild.buildroot.net/toolchains/configs/toolchain-configs.csv
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This has a number of side-effects which must be handled.
The lines in minimal.config may be overridden by the random lines added
by amending the configuration, so is_toolchain_usable() shouldn't take
those into account, or indeed the random lines added. Therefore, make
a copy of the config before appending minimal.config and the random
lines. While we're at it, rename the variable to the more appropriate
toolchainconfig.
minimal.config sets BR2_INIT_NONE=y, but we really also want to test
with BR2_INIT_BUSYBOX=y. Therefore, add a random line to use the
busybox init system. We set its probability rather high. The
probabilities of systemd and eudev are increased since they're now
in the else branch of BR2_INIT_BUSYBOX, which halves the probability
that we even get there.
We now also generate configurations without busybox. Previously,
busybox was almost always selected due to BR2_INIT_BUSYBOX=y. Only if
systemd is selected there was a chance to build without busybox.
We now set BR2_SYSTEM_BIN_SH_NONE=y, the other /bin/sh options are
never tested. However, this is not really something that is relevant
to test in the autobuilders.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When outputdir is 'output' (the default), genrandconfig didn't work
correctly because it expects the configfile in outputdir, while
Buildroot puts it in the buildroot directory.
Fix this by explicitly checking if outputdir == buildrootdir/output.
Because abspath is used for both paths, string comparison works
reliably.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path to the .config file is calculated in several places - replace
it with a single calculation, and pass configfile as an argument
to is_toolchain_usable and fixup_config. These functions also don't
need outputdir any more.
This makes it easier to fix the case when configfile is not in
outputdir.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The --instance argument is just an artifact of genrandconfig's
history as part of autobuild-run. It is much more logical to pass
the output directory and the buildroot directory as arguments, with
sane defaults.
This also allows us to remove the hack of creating a symlink in the
instance directory if it doesn't exist yet.
Note that the default outputdir 'output' doesn't work yet, because in
that case Buildroot will put the config file in the buildroot directory
instead of the output directory. This will be fixed in a follow-up
patch.
After this change, the script should be called from autobuild-run as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-o", outputdir, "-b", srcdir,
"--toolchains-url", kwargs['toolchains_url']],
stdout=devnull, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output of genrandconfig is currently very terse, which is annoying
for debugging the script or generally seeing what is going on. Also the
timing information added by log_write isn't very useful when the script
is used stand-alone.
In the new setup, (verbose) output goes to stdout and error output goes
to stderr. Also the "INFO: generate the configuration" message is
eliminated - it should go in the autobuild-run script.
We also add an explicit message when a toolchain can't be used after
the first defconfig, otherwise autobuild-run will just silently
restart.
Note that, since the output of make is no longer redirected to
/dev/null, we get one more message on stderr that will be recorded in
the autobuilder's log file: KCONFIG_SEED=0xXXXXXXXX.
This approach allows us to optimise the error handling to use
exceptions, where appropriate, which can be caught at the top level and
converted to an error message to stderr. This, in turn, allows us to use
subprocess.check_call, which eliminates a lot of conditions.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SystemInfo class is instantiated globally and passed down to all
functions, but it is really only used in fixup_config. So instead,
instantiate it there.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kwargs is a left-over from the use of docopt, it's better to use
argparse's Namespace object directly.
In addition, most functions use just one or two fields of args, so
these can just as well be passed directly as arguments to the function.
Particularly for outputdir it doesn't make sense to reconstruct it all
the time.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Warnings fixed:
E731 do not assign a lambda expression, use a def
-> urlopen_closing is defined with a def. urlopen is not used
elsewhere so inlined.
E302 expected 2 blank lines
E501 line too long
-> long lines due to a long string are NOT split
E701 multiple statements on one line (colon)
E722 do not use bare except'
-> use "except Exception", so KeyInterrupt and SystemExit are still
passed. We never intended to catch those.
E741 ambiguous variable name 'l'
-> variable name is replaced with the much more descriptive
toolchains_csv
E271 multiple spaces after keyword
E231 missing whitespace after ','
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Popen is more complicated and more difficult to understand.
check_output raises an exception if the exit code is non-zero, but
that's probably what we want if ldd can't be executed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script will be used by the autobuild-run script to generate the
configuration to test. It is put in the utils directory because it can
also be called directly to allow users to test things.
For now, it is a direct copy of the relevant functions from the
autobuild-run script. The only changes are:
- unneeded import statements are removed;
- code/decode wrappers are limited to decode_byte_list;
- __main__ handling is added.
For now, the only supported arguments are the ones needed for
autobuild-run. Follow-up patches will refactor things and also change
the way the script is called. In this version, it can be called from the
autobuild-run script as:
subprocess.call([os.path.join(srcdir, "utils/genrandconfig"),
"-i", str(kwargs['instance']),
"--toolchains-url", kwargs['toolchains_url']],
stdout=log, stderr=log)
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RUNDIR installs the test applications and shared libraries into a
different folder then /usr/lib. This is desired as there are a lot of
test apps which would get installed into /usr/lib without
organization. Instead, set RUNDIR=/usr/lib/paxtest to install the test
apps and libraries in a sub folder. The genpaxtest script accounts for
this path and handles a LD_LIBRARY_PATH update as part of the paxtest
script's exeuction.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add package to provide Zstandard compression tools
(see https://facebook.github.io/zstd)
Minimal config snippet for utils/test-pkg is as follows:
BR2_PACKAGE_ZSTD=y
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas:
- use "config" instead of "menuconfig" in Config.in
- add missing final newline in Config.in
- pass DESTDIR=$(TARGET_DIR) only at install time
- wrap too long lines in the .mk file
- remove useless empty newline at end of .hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump U-Boot to 2017.07 and kernel to version 4.12.3.
As imx_v6_v7_defconfig in 4.12 selects CONFIG_CFG80211_WEXT=y,
remove the linux.fragment file.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit de903755d7 (grep: fix build failure for musl) added
--with-included-regex to configure options in musl builds. The commit log
mentions build failure because grep configure doesn't detect the missing libc
regex support. Unfortunately, the commit log adds no details on said build
failure, or any autobuilder reference. The autobuilder didn't record
any grep build failure for version 2.20 that was current at the time.
Build with musl succeeds nowadays, so remove the workaround.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the 'disable' config option in the 'else' clause of the optional
dependency as is the common pattern.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit cf3cd4388a the -j option is
silently ignored.
The configuration lines are processed using '\n'.join().
This function adds intervening occurrences of the separator, but the
resulting string does not end at a separator.
>>> "n".join(["a","b"])
'anb'
It results in a defconfig that does not end in a newline.
When BR2_JLEVEL is added by -j logic to the defconfig it ends up
concatenated to the last line of the defconfig.
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_ARM=yBR2_JLEVEL=7
The resulting .config has the default BR2_JLEVEL=0.
Instead of just workaround this problem by adding a newline before
BR2_JLEVEL when -j is used, make the defconfig to end in a newline since
it is a more future-proof solution.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes security bugs CVE-2017-11103 & CVE-2017-6594
Changed upstream tarball location as noted in the release notes:
http://www.h5l.org/releases.html?show=7.4.0
--with-db-type-preference= is needed to fix a build error:
CCLD otp
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_get_internal':
otp_db.c:(.text+0x32): undefined reference to `__roken_dbm_fetch'
otp_db.c:(.text+0xd9): undefined reference to `__roken_dbm_store'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_db_open':
otp_db.c:(.text+0x1c9): undefined reference to `__roken_dbm_open'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_db_close':
otp_db.c:(.text+0x205): undefined reference to `__roken_dbm_close'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_delete':
otp_db.c:(.text+0x23e): undefined reference to `__roken_dbm_delete'
../../lib/otp/.libs/libotp.a(otp_db.o): In function `otp_put':
otp_db.c:(.text+0x388): undefined reference to `__roken_dbm_store'
collect2: error: ld returned 1 exit status
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for nanopi-m1-plus board
with below features
- U-Boot 2017.07-rc3
nanopi-m1-plus dts support is present in rc3 version
- Linux 4.11.5
- linux patches to add nanopi-m1-plus dts
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have 0001-remove-__FAVOR_BSD.patch in uClibc-ng (which is
upstream and will be part of uClibc-ng 1.0.26), we no longer need the
work-around patch in the ndisc6 package.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable is currently not used by anyone.
The value is changed to match the path to DL_DIR.
The next patch will introduce the use of PKG_DL_DIR for packages that
use specific EXTRACT_CMDS.
And then we will be able to change the value of PKG_DL_DIR to create a
new directory structure in DL_DIR with a subdirectory for each package.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-aespipe fails on Debian stretch at linking stage:
/usr/bin/gcc -L/home/buildroot/br6/output/host/lib -L/home/buildroot/br6/output/host/usr/lib -Wl,-rpath,/home/buildroot/br6/output/host/usr/lib -o aespipe aespipe.o aes-amd64.o md5-amd64.o md5-2x-amd64.o aes-intel64.o sha512.o rmd160.o
/usr/bin/ld: aes-amd64.o: relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
The same problem apparently exists on recent Ubuntu and Gentoo.
Fix is also used in Debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837393
[Peter: add comment explaining why]
[Arnout: use host-cc-option to discover if -no-pie is available;
cfr. 57b628a932]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This macro allows to test if HOSTCC supports a specific option. It is
needed to pass '-no-pie' on recent Debian, Ubuntu and Gentoo hosts.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The big.LITTLE configurations can be optimised for by gcc, and a few
users wonder what they should choose when they have such CPUs.
Add new entries for those big.LITTLE configurations.
Note: the various combos were added in various gcc versions, but only
really worked in later versions:
Variant | Introduced in | First built in
----------+---------------+----------------
a15-a7 | 4.9 | 4.9
a17-a7 | 5 | 5
a57-a53 | 4.9 | 6
a72-a53 | 5 | 6
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all architecture options to their own symbol, so that it is easier
to add more variants in the future.
The dependency on cross-gcc >= 4.5 is only valid for i386, as we use the
host gcc for x86_64. Adapt the dependency accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cyril Bur <cyrilbur@gmail.com>
[Thomas:
- add comment about host gcc >= 4.5 dependency on x86-64
- remove bogus "depends on ... if ..." construct.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the build of efivar with gcc 7.x has been fixed by commit
0ca3017034 ("efivar: fix build with gcc
7"), efibootmgr fails similarly with gcc 7.x.
This commit backports an upstream patch that fixes this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Depending on Python implementation used for testing, time it takes to
perform a given test can vary pretty significantly. To accout for that
allow individual test functions to specify different timeout value.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to be able to leverage the same test code for testing
different python interpreters (or wrappers around CPython) allow child
classes of TestPythonBase to override the name of the executable used
to run tests.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Python3 version of TestPython2 to make sure both versions of
Python get unit-tested.
Modify the code of libc_time_test() to support that change (convert
the code to use Python3-style "print").
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert TestPythonBase to a true base class that only provides code
implementing various tests without defining tests themselves in a
"discoverable" form.
To retain correct testing functionality, add TestPython2 derived class
that uses code from TestPythonBase to define actual runnable test.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: fix typo in commit log, update .gitlab-ci.yml, both pointed
by Ricardo.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, remounting / read-write (or not) is done by the skeleton
package when the init system is either busybox or sysvinit, by
registering a target-finalize hook; it is not done at all for systemd.
Move registering this target-finalize hook to both of busybox and
sysvinit. Leave systemd alone, we'll take care of it later.
Rename the macro to a more meaningful name, and move it to system.mk
with the other such macros.
Yet a little bit less init-system knowledge in the skeleton.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove not-so-useful comments, as pointed by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, setting the getty is done:
- by the skeleton package when the init system is either busybox or
sysvinit;
- by the systemd package when the init system is systemd;
both by registering a target-finalize hook.
This is not very consistent.
Move setting the getty out of the skeleton and into the package that
provides the init system, by registering a per-package target-fialize
hook.
This offloads yet a bit more out of the skeleton, so that it is easier
to properly separate the skeletons for the various init systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some macros, soon some variables, currently defined in the skeleton are
going to be used by other packages.
Some of those variables will be used as Makefile conditions (e.g. in
ifeq() conditions), so they *must* be defined before being used.
Since the skeleton package, starting with an 's', is included quite
late, those variables would not be available to most packages.
Offload the existing macros into the new system/system.mk file, that is
included early, before any package is. Rename the macros to appropriate
names.
Future commits will add new macros and variables in that file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rather than duplicate that code in all skeleton packages, make this a
macro, so that it is easier to use.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ffmpeg always enables support for nvenc/cuda even if their support
libraries are not present:
External libraries providing hardware acceleration:
cuda cuvid nvenc
[...]
Enabled hwaccels:
h264_cuvid mjpeg_cuvid mpeg2_cuvid vc1_cuvid vp9_cuvid
hevc_cuvid mpeg1_cuvid mpeg4_cuvid vp8_cuvid
This leads to a crash in freeswitch git master when transcoding video
streams on a system without nvidia hardware:
2017-07-22 15:06:27.306760 [INFO] avcodec.c:1077 initializing encoder 352x288
2017-07-22 15:06:27.306760 [NOTICE] avcodec.c:828 NVENC HW CODEC ENABLED
This patch disables the support of nvidia hardware acceleration support
for now until the needed packages are added to buildroot. For details
about this please refer to https://developer.nvidia.com/ffmpeg
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rsync command is currently called from a single location. In
follow-up patches, it will be called from various places then.
It will be easier to update and fix this command if it is defined in a
single location, rather than if duplicated in many places.
Define a macro that skeleton packages can call to install their skeleton
directories. Since at least one occurrence of it will want to install in
staging, the macro must accept a destination path, rather than hard-code
target as the destination.
Since it is to be used by other skeleton packages, define it early,
outside of any conditional block.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently skip the skeleton dependency by checking if the current
package is the skeleton.
We are going to introduce more skeleton-related packages, so we
need a way to exclude the skeleton dependency for those, or we'd
get a circular dependency, for the same reason we need to skip
the toolchain dependency.
Instead of checking for all the skeleton-providing packages in the core
infra, add a new package options so that packages can express they do
not need the dependency on the skeleton, like we have an option to avoid
the depednency on the toolchain. The only packages that will use that
option are probably the skeletons, so we need not document this
variable, like we did not document the option to exclude the dependency
on the toolchain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Rebase on top of mainline 2017.03 release
- Fix sparse image flashing issues
Here are the main Linux modifications:
- Add mma8451 driver support
- Fix possible TiWi spurious interrupts issue
- Fix Ethernet interrupt parent issue
- Add USB Type C TUSB320 controller support
- Add SOM2 i.MX6DL and i.MX6QP variants
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches 0001 to 0004 were upstream backports, so they have been
dropped. Patch 0005 has been upstreamed as commit
af5fb3d6e7. Therefore,
all 5 patches are dropped.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a separate make target to build a relocatable SDK. We first
sanitize the RPATH in host tree. Next we also sanitize the
staging tree. Therefore "sdk" must depend on world.
Sanitizing staging is not really needed, in the sense that any rpath
in there is simply not going to be used. We want to sanitize staging
for the following reasons:
- To avoid leaking references to the original output directory. This
way, we can validate that the SDK is relocatable by running a simple
"grep -r ${BASE_DIR} ${HOST_DIR}". Obviously RPATH sanitization is
not sufficient (e.g. also the references to source files have to be
stripped), but it's a step in the right direction. This reason is
obviously only relevant for the SDK.
- To make sure that when an executable is copied to target that it
actually executes correctly. Since within Buildroot we never copy
stuff from staging to target, this is clearly only relevant for
the SDK.
Finally we install the script "relocate-sdk.sh" into the top directory
of the SDK (HOST_DIR) and the SDK location path is stored in the file
"HOST_DIR/share/buildroot/sdk-location"-
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mfpxx option was added in gcc-5.1.0 so make sure that users cannot
select the "xx" fp32 mode when using toolchains that have a gcc older
than 5.1.0.
-mfp32 and -mfp64 were added in gcc-4.1.0, so given the older gcc
version we support in Buildroot (in the GCC_AT_LEAST options) is 4.3 we
don't need to do anything else for them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-mnan option was added in gcc-4.9.0 so make sure that users cannot
select the NaN mode when using toolchains that have a gcc older
than 4.9.0, and also make sure that the -mnan option is not passed at
all to the toolchain-wrapper and target cflags.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note, that since version 2017.07 the sunxi targets needs the Python
libfdt library on the host. Therefore, additionally select the U-Boot
config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new config option BR2_TARGET_UBOOT_NEEDS_PYLIBFDT for U-Boot
targets, like sunxi, needing the Python libfdt library.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: drop bogus selects on BR2_PACKAGE_HOST_{PYTHON,SWIG}.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 2.16.5 of WebKitGTK+ already includes the fix added by the
removed patch, which is now unneeded.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The user shouldn't need to pass this manually when creating a test-pkg
config file. It's an absolutely harmless option to enable always.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We really want test-pkg to do the test with a paranoid unsafe path.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This minimal configuration is also very useful outside test-pkg. In
addition, it will simplify the config merge in a later patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of letting the configure script automatically detect the
presence of bluez package files, the script is now explicitly
instructed to enable or disable bluez (both 4.x and 5.x) support based
on the selection of the following packages: bluez_utils, bluez5_utils
and sbc.
Indeed, the bluez_utils or bluez5_utils packages were not sufficient
to enable Bluetooth support, the sbc package is also needed, but when
no --enable option is passed, the configure script silently disables
Bluetooth support if one of the dependencies is missing.
Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since ipmitool v1.8.17 usb support is turned off by default. Add a
config option to enable support for the usb interface.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file "qt.conf" can be used to override the hard-coded paths that
are compiled into the Qt library. This is required to make "qmake"
relocatable. Actually, we need to specify all variables to overwrite
the compiled in values.
CC: Julien Corjon <corjon.j@ecagroup.com>
CC: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We sanitize the RPATH of ELF files in the target tree to deal
with stupid packages that don't correctly use --prefix/DESTDIR
and that end up putting the full absolute build-time directory
in the RPATH.
We do it before copying the overlay and calling the post-build
script. The user is completely responsible for what happens
in the last two steps, and it should never be touched by us.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces the script "fix-rpath" able to scan a tree,
detect ELF files, check their RPATH and fix it in a proper way.
The RPATH fixup is done by the patchelf utility using the option
"--make-rpath-relative <root-directory>".
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch allows to use patchelf to sanitize the rpath of the buildroot
libraries and binaries using the option "--make-rpath-relative <rootdir>".
Recent versions of patchelf will not built on old Debian and RHEL systems
due to C++11 constructs. Therefore we stick with v0.9 for the time being.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The normal shell does not support the bashism "< <(...)". Therefore
we use a normal pipe to find files containing a specific string.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'if __name__ == "__main__"' idiom typically calls main function that
doesn't take any arguments in most cases. We shouldn't pass any tuple to
it.
I've tested the script with python-idna-2.5 and now it works with this
little change.
Signed-off-by: Alexey Roslyakov <alexey.roslyakov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires libuv and by default will use an internal copy
bundled with the release. Change to using a shared libuv library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires libhttpparser and by default will use an internal copy
bundled with the release. Change to using a shared libhttpparser library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs requires c-ares and by default will use an internal copy
bundled with the release. Change to using a shared c-ares library.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
[Thomas:
- tweak Config.in help text as provided by Markus
- adjust commit log
- add missing select BR2_PACKAGE_NCURSES
- add missing dependency on host-pkgconf, used by the tmon Makefile
to find ncurses
- add logic to disable -fstack-protector when the toolchain doesn't
have SSP support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make inclusion ordering of all linux-tool-*.mk sub-makefiles explicit
instead of relying on alphabetical sort order. This is done by
renaming the Linux tools sub-makefiles to the format linux-tool-*.mk.in.
This causes the top-level Makefile to ignore the Linux tools
sub-makefiles.
Until now, the main Makefile included all linux-tool-*.mk files, as
well as linux-tools.mk, and it relied on alphabetical sorting to
include them in the proper order (linux-tool-*.mk before
linux-tools.mk).
Signed-off-by: Markus Mayer <mmayer@broadcom.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: improve comment in the code as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Add uClibc-ng compatibility fix. This is needed due to missing definition in
netinet/in.h.
Add license file hash.
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nvme-cli had many bugfixes and improvements over the releases.
Buildroot still has version 0.3, so this patch bumps it to the
latest upstream release, version 1.3.
Signed-off-by: Guilherme G. Piccoli <gpiccoli@linux.vnet.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changelog since previous revision:
6a01dfb fix for memory leak in gc_hal_kernel_os.c
f73c35b Add support for PREEMPT_RT kernels
Also updating the help text to make sure users know this module won't
build with Mainline kernel but only with NXP forks.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, defining a config fragment in the runtime test infra requires
that the fragment not to be indented. This is beark, and causes grievance
when looking at the code (e.g. to fix it).
Just strip out all leading spaces/tabs when writing the configuration
lines into the config file, allowing in-line indented config fragments,
like so:
class TestFoo(bla):
config = bla.config + \
"""
FOO=y
# BAR is not set
"""
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2016-10324 - In libosip2 in GNU oSIP 4.1.0, a malformed SIP
message can lead to a heap buffer overflow in the osip_clrncpy() function
defined in osipparser2/osip_port.c.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MIPS supports two different NaN encodings, legacy and 2008. Information
about MIPS NaN encodings can be found here:
https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
NaN legacy is the only option available for R2 cores and older.
NaN 2008 is the only option available for R6 cores.
R5 cores can have either NaN legacy or NaN 2008, depending on the
implementation. So, if the user selects a generic R5 target architecture
variant, we show a choice menu with both options available. For well
known R5 cores we directly select the NaN enconding they use.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed in the mailing list, grub2 usage notes were growing too big
for a Config.in documentation, and so it was agreed that a readme.txt in
the package directory is a better place to put them.
This commit simply moves the documentation as-is to preserve the
original contents as they were in Config.in which can be worked on in
further commits.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After many years since the last release and a long time with grub 2.02
in beta, there is finally a release and it brings many bug fixes and
interesting features such as support for ARM.
Patch boot/grub2/0001-remove-gets.patch doesn't seem to be required
anymore as grub-core/gnulib/stdio.in.h has changed significantly since
"053cfcd Import new gnulib." and has another treatment for gets.
Patch
boot/grub2/0002-grub-core-gettext-gettext.c-main_context-secondary_c.patch
was a backport which is present after the bump and therefore is also no
longer necessary.
Since we're adding a Config.in comment, we also introduce a
BR2_TARGET_GRUB2_ARCH_SUPPORTS hidden boolean, in order to avoid
repeating the architecture dependencies.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add BR2_TARGET_GRUB2_ARCH_SUPPORTS, remove bogus dependencies
on ARM and AArch64, since enabling Grub2 on those architectures is
done in another commit.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have wordexp support in uClibc-ng and nodm is available, we can
use it for the graphical defconfig.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using this defconfig produces a build error with kodi:
BR2_arm=y
BR2_cortex_a8=y
BR2_ARM_INSTRUCTIONS_THUMB2=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_KODI=y
BR2_PACKAGE_SUNXI_MALI=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_PY_ONLY=y
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:37:1:
error: ‘string’ does not name a type
string CFTPParse::getName()
^~~~~~
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:62:25:
error: variable or field ‘setTime’ declared void
void CFTPParse::setTime(string str)
^~~~~~
/home/buildroot/buildroot/output/build/kodi-17.3-Krypton/xbmc/filesystem/FTPParse.cpp:62:25:
error: ‘string’ was not declared in this scope
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep currently doesn't really use wchar support anyways, and when
checking for wchar support, it's checking the host systems ncurses
libraries.
Remove support for ncurses wchar until it's used in sngrep, and remove
the patches used to fix ncurses wchar detection.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump Linux kernel version to 4.12.1 and U-Boot to 2017.05.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the board specific patches which has been applied upstream.
[Peter: also drop now unused BR2_GLOBAL_PATCH_DIR]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since [1], NONLS is added to LSHW_CFLAGS even for glibc based toolchain.
Previously it was not the case since BR2_ENABLE_LOCALE is always
selected for glibc based toolchain.
With NONLS, config.h try to redefine two Intl function (textdomain and
bindtextdomain) that are used by glibc internally.
This break the build with the following error:
sysroot/usr/include/libintl.h:82:52: error: expected unqualified-id before 'throw'
extern char *textdomain (const char *__domainname) __THROW;
The NONLS mode is really for cases where the C library does not provide
*any* gettext implementation, as would be the case with uClibc without
intl stubs enabled.
But in the context of Buildroot, all C libraries provide a gettext
implementation. It might be full-featured or minimal, but it always
exists.
So, remove NONLS from CFLAGS to avoid the build issue with glibc
toolchains.
Build tested with a uClibc toolchain without locale enabled.
Fixes:
http://autobuild.buildroot.net/results/9bf/9bf5437b4348ea8077013b80a51ce05fa328247d
[1] 3acd9f845d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The bugtracker is intended to be used for bug reports only, so clarify
it's not meant to be used for "any problem".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pulseaudio configure script autodetects the presence of
bluez 4.x and 5.x packages on the system and will exclude the
bluetooth-related modules in their absence.
This commit ensures that bluez5_utils, if selected, are installed
before pulseaudio. The same already happens for bluez_utils (4.x).
Signed-off-by: Calin Crisan <ccrisan at gmail dot com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsanitizer in gcc fails to build on PowerPC with gcc versions 4.9
and 5.x used in conjunction with glibc 2.25, with the following error:
../../../../gcc-host/libsanitizer/asan/asan_linux.cc: In function 'bool __asan::AsanInterceptsSignal(int)':
../../../../gcc-host/libsanitizer/asan/asan_linux.cc:222:20: error: 'SIGSEGV' was not declared in this scope
return signum == SIGSEGV && common_flags()->handle_segv;
This commit adds a patch that has been submitted to upstream gcc
(https://patchwork.ozlabs.org/patch/725596/) but not merged. The patch
is no longer needed with gcc 6.x and later because the code has been
reworked.
Fixes Buildroot bug #10061
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a Linux kernel patch to solve a build failure with
the arcturus_ucp1020_defconfig with gcc 6.x:
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
The patch is upstream in Linux, and can be dropped when
arcturus_ucp1020_defconfig is updated to use a new Linux kernel
version.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes it can be interesting to call back into buildroot from a
post-build/image script (E.G. make printvars or similar). For this to work
correctly with out-of-tree builds we need to pass O= to make, but this is
currently not available in the environment of post-build/image scripts.
In concept, O could be derrived from BUILD_DIR (E.G. by stripping /build),
but directly exporting O is cleaner.
O= cannot be exported globally as it interferes with various build systems,
so instead add it to EXTRA_ENV.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The vcdbg utility is linked to a few libraries, which so far were all
provided by the rpi-userland package.
But a not-so-recent bump of rpi-firmware pulled in a vcdbg that is
linked to an additional library, which is not privided by rpi-userland,
so we must install it.
Reported-by: cluelessperson on #buildroot
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-10688 - n LibTIFF 4.0.8, there is a assertion abort in the
TIFFWriteDirectoryTagCheckedLong8Array function in tif_dirwrite.c. A
crafted input will lead to a remote denial of service attack.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove Python2 only dependency as the package is compatible
with Python3.
Add a dot at the end of the help text.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7529 - Nginx versions since 0.5.6 up to and including 1.13.2
are vulnerable to integer overflow vulnerability in nginx range filter
module resulting into leak of potentially sensitive information triggered by
specially crafted request.
For more details, see:
http://mailman.nginx.org/pipermail/nginx-announce/2017/000200.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-1000381 - The c-ares function ares_parse_naptr_reply(), which
is used for parsing NAPTR responses, could be triggered to read memory
outside of the given input buffer if the passed in DNS response packet was
crafted in a particular way. This patch checks that there is enough data
for the required elements of an NAPTR record (2 int16, 3 bytes for string
lengths) before processing a record.
See https://nodejs.org/en/blog/release/v8.1.4/
[Peter: add CVE info]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-11103:
All versions of Samba from 4.0.0 onwards using embedded Heimdal
Kerberos are vulnerable to a man-in-the-middle attack impersonating
a trusted server, who may gain elevated access to the domain by
returning malicious replication or authorization data.
Samba binaries built against MIT Kerberos are not vulnerable.
https://www.samba.org/samba/history/samba-4.5.12.html
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Removed patches 0003 & 0004, applied upstream.
Fixes the following security issues:
CVE-2017-7244 - The _pcre32_xclass function in pcre_xclass.c in libpcre1 in
PCRE 8.40 allows remote attackers to cause a denial of service (invalid
memory read) via a crafted file.
CVE-2017-7245 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 4) or possibly have unspecified
other impact via a crafted file.
CVE-2017-7246 - Stack-based buffer overflow in the pcre32_copy_substring
function in pcre_get.c in libpcre1 in PCRE 8.40 allows remote attackers to
cause a denial of service (WRITE of size 268) or possibly have unspecified
other impact via a crafted file.
[Peter: add CVE info]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have
$(TARGET_DIR)/usr/lib/python$(PYTHON_VERSION_MAJOR)/site-packages/
inside the PYTHON_PATH variable, which gets used to define PYTHONPATH,
passed to the host Python interpreter when building/installing target
packages.
However, this is terribly wrong, as it causes the host interpreter to
potentially import target Python packages. This is wrong for several
reasons:
- Some Python packages might need some Python modules to be installed
on the host (described in setup_requires in setup.py), but their
installation currently works because by luck the corresponding
Python module is installed for the target. Some of those cases were
happening for real, and fixed by previous patches.
- Some Python packages include some native code, therefore built for
a specific CPU architecture. When you point the host Python
interpreter to native libraries built for the target, you get nice
build failures, such as the one affecting the python-cffi related
packages.
Making this change allows to fix the python-cffi related build
failures:
http://autobuild.buildroot.net/results/a9af84f2d845ee25e2b7d8b92aef485112b46060/
(python-cryptography)
http://autobuild.buildroot.net/results/b017c4f6b4d45c0afbf06a80dbd3f2ebe5d49d20/
(python-pynacl)
http://autobuild.buildroot.net/results/25144ea191ad46d851b31d3a2f0ef939f215494b/
(python-smbus-cffi)
This change has been verified with the following defconfig that
enables a lot of Python packages:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.05-834-gb595627.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_PYTHON_ALSAAUDIO=y
BR2_PACKAGE_PYTHON_ARROW=y
BR2_PACKAGE_PYTHON_ATTRS=y
BR2_PACKAGE_PYTHON_AUTOBAHN=y
BR2_PACKAGE_PYTHON_BITSTRING=y
BR2_PACKAGE_PYTHON_BOTTLE=y
BR2_PACKAGE_PYTHON_CAN=y
BR2_PACKAGE_PYTHON_CBOR=y
BR2_PACKAGE_PYTHON_CHARDET=y
BR2_PACKAGE_PYTHON_CHEETAH=y
BR2_PACKAGE_PYTHON_CHERRYPY=y
BR2_PACKAGE_PYTHON_CONFIGOBJ=y
BR2_PACKAGE_PYTHON_CONFIGSHELL_FB=y
BR2_PACKAGE_PYTHON_CRC16=y
BR2_PACKAGE_PYTHON_CRCMOD=y
BR2_PACKAGE_PYTHON_CSSSELECT=y
BR2_PACKAGE_PYTHON_CSSUTILS=y
BR2_PACKAGE_PYTHON_DAEMON=y
BR2_PACKAGE_PYTHON_DIALOG=y
BR2_PACKAGE_PYTHON_DICTTOXML=y
BR2_PACKAGE_PYTHON_DJANGO=y
BR2_PACKAGE_PYTHON_DOCOPT=y
BR2_PACKAGE_PYTHON_DPKT=y
BR2_PACKAGE_PYTHON_ECDSA=y
BR2_PACKAGE_PYTHON_ENUM=y
BR2_PACKAGE_PYTHON_FLASK_BABEL=y
BR2_PACKAGE_PYTHON_FLASK_JSONRPC=y
BR2_PACKAGE_PYTHON_FLASK_LOGIN=y
BR2_PACKAGE_PYTHON_FLUP=y
BR2_PACKAGE_PYTHON_GOBJECT=y
BR2_PACKAGE_PYTHON_GUNICORN=y
BR2_PACKAGE_PYTHON_HTML5LIB=y
BR2_PACKAGE_PYTHON_HTTPLIB2=y
BR2_PACKAGE_PYTHON_HUMANIZE=y
BR2_PACKAGE_PYTHON_ID3=y
BR2_PACKAGE_PYTHON_INIPARSE=y
BR2_PACKAGE_PYTHON_IOWAIT=y
BR2_PACKAGE_PYTHON_IPADDR=y
BR2_PACKAGE_PYTHON_IPY=y
BR2_PACKAGE_PYTHON_IPYTHON=y
BR2_PACKAGE_PYTHON_JSON_SCHEMA_VALIDATOR=y
BR2_PACKAGE_PYTHON_KEYRING=y
BR2_PACKAGE_PYTHON_LIBCONFIG=y
BR2_PACKAGE_PYTHON_LMDB=y
BR2_PACKAGE_PYTHON_LXML=y
BR2_PACKAGE_PYTHON_MAD=y
BR2_PACKAGE_PYTHON_MARKDOWN=y
BR2_PACKAGE_PYTHON_MELD3=y
BR2_PACKAGE_PYTHON_MISTUNE=y
BR2_PACKAGE_PYTHON_MSGPACK=y
BR2_PACKAGE_PYTHON_MUTAGEN=y
BR2_PACKAGE_PYTHON_MWSCRAPE=y
BR2_PACKAGE_PYTHON_NETADDR=y
BR2_PACKAGE_PYTHON_NETIFACES=y
BR2_PACKAGE_PYTHON_NFC=y
BR2_PACKAGE_PYTHON_NUMPY=y
BR2_PACKAGE_PYTHON_PAHO_MQTT=y
BR2_PACKAGE_PYTHON_PAM=y
BR2_PACKAGE_PYTHON_PARAMIKO=y
BR2_PACKAGE_PYTHON_PILLOW=y
BR2_PACKAGE_PYTHON_POSIX_IPC=y
BR2_PACKAGE_PYTHON_PSUTIL=y
BR2_PACKAGE_PYTHON_PUDB=y
BR2_PACKAGE_PYTHON_PYCLI=y
BR2_PACKAGE_PYTHON_PYCPARSER=y
BR2_PACKAGE_PYTHON_PYELFTOOLS=y
BR2_PACKAGE_PYTHON_PYFTPDLIB=y
BR2_PACKAGE_PYTHON_PYGAME=y
BR2_PACKAGE_PYTHON_PYGAME_IMAGE=y
BR2_PACKAGE_PYTHON_PYGAME_EXAMPLES=y
BR2_PACKAGE_PYTHON_PYGAME_FONT=y
BR2_PACKAGE_PYTHON_PYGAME_MIXER=y
BR2_PACKAGE_PYTHON_PYINOTIFY=y
BR2_PACKAGE_PYTHON_PYLIBFTDI=y
BR2_PACKAGE_PYTHON_PYMYSQL=y
BR2_PACKAGE_PYTHON_PYPARTED=y
BR2_PACKAGE_PYTHON_PYPCAP=y
BR2_PACKAGE_PYTHON_PYQRCODE=y
BR2_PACKAGE_PYTHON_PYRATEMP=y
BR2_PACKAGE_PYTHON_PYRO=y
BR2_PACKAGE_PYTHON_PYROUTE2=y
BR2_PACKAGE_PYTHON_PYSENDFILE=y
BR2_PACKAGE_PYTHON_PYSMB=y
BR2_PACKAGE_PYTHON_PYSNMP_APPS=y
BR2_PACKAGE_PYTHON_PYSNMP_MIBS=y
BR2_PACKAGE_PYTHON_PYSOCKS=y
BR2_PACKAGE_PYTHON_PYTABLEWRITER=y
BR2_PACKAGE_PYTHON_PYTRIE=y
BR2_PACKAGE_PYTHON_PYUSB=y
BR2_PACKAGE_PYTHON_PYXB=y
BR2_PACKAGE_PYTHON_PYZMQ=y
BR2_PACKAGE_PYTHON_REQUESTS_TOOLBELT=y
BR2_PACKAGE_PYTHON_RPI_GPIO=y
BR2_PACKAGE_PYTHON_RTSLIB_FB=y
BR2_PACKAGE_PYTHON_SDNOTIFY=y
BR2_PACKAGE_PYTHON_SERIAL=y
BR2_PACKAGE_PYTHON_SETPROCTITLE=y
BR2_PACKAGE_PYTHON_SH=y
BR2_PACKAGE_PYTHON_SHUTILWHICH=y
BR2_PACKAGE_PYTHON_SIMPLEJSON=y
BR2_PACKAGE_PYTHON_SMBUS_CFFI=y
BR2_PACKAGE_PYTHON_SOCKETIO=y
BR2_PACKAGE_PYTHON_SORTEDCONTAINERS=y
BR2_PACKAGE_PYTHON_SPIDEV=y
BR2_PACKAGE_PYTHON_THRIFT=y
BR2_PACKAGE_PYTHON_TOMAKO=y
BR2_PACKAGE_PYTHON_TREQ=y
BR2_PACKAGE_PYTHON_U_MSGPACK=y
BR2_PACKAGE_PYTHON_UBJSON=y
BR2_PACKAGE_PYTHON_UJSON=y
BR2_PACKAGE_PYTHON_URLLIB3=y
BR2_PACKAGE_PYTHON_VERSIONTOOLS=y
BR2_PACKAGE_PYTHON_WATCHDOG=y
BR2_PACKAGE_PYTHON_WEB2PY=y
BR2_PACKAGE_PYTHON_WEBPY=y
BR2_PACKAGE_PYTHON_WHOOSH=y
BR2_PACKAGE_PYTHON_WS4PY=y
BR2_PACKAGE_PYTHON_WSACCEL=y
BR2_PACKAGE_PYTHON_XLUTILS=y
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The python-treq package lists the incremental Python module as part of
its setup_requires variable in setup.py, so it must be added as a host
dependency of the python-treq package to avoid build failures.
So far, this issue wasn't visible because python-treq selects
python-twisted, which itself selects the target python-incremental
package. Because python-incremental was before python-treq in the
alphabetic ordering, it was always built before python-treq. And due
to the fact that PYTHONPATH currently contains the directory with
target Python modules, the host Python interpreter was happily using
the target python-incremental while running on the host. But as we are
going to clean up PYTHONPATH, this will no longer be the case, and
hence python-treq needs to be fixed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-json-schema-validator does not need versiontools on the target,
but only on the host, as it's listed in setup_requires in setup.py.
This was not noticed so far because host Python interpreter is started
with a PYTHONPATH that contains a directory with target Python
packages, so versiontools was found there. But as we are about to fix
PYTHONPATH to no longer include such a directory,
python-json-schema-validator would fail due to versiontools being
missed on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-u-msgpack can use setuptools instead of distutils, and
using setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyro can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyasn can use setuptools instead of distutils, and using
setuptools is generally preferred.
In addition, using setuptools allows to make sure the package will
continue to build when we will adjust the PYTHONPATH variable to no
longer point to target Python modules. Without such a change to
setuptools, the build would fail with:
=====================================================================
running install
Checking .pth file support in /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
/home/test/buildroot/output/host/bin/python -E -c pass
TEST FAILED: /home/test/buildroot/output/target/usr/lib/python2.7/site-packages/ does NOT support .pth files
error: bad install directory or PYTHONPATH
You are attempting to install a package to a directory that is not
on PYTHONPATH and which Python does not read ".pth" files from. The
installation directory you specified (via --install-dir, --prefix, or
the distutils default setting) was:
/home/test/buildroot/output/target/usr/lib/python2.7/site-packages/
and your PYTHONPATH environment variable currently contains:
'/home/test/buildroot/output/target/usr/lib/python2.7/sysconfigdata/'
Here are some of your options for correcting the problem:
* You can choose a different installation directory, i.e., one that is
on PYTHONPATH or supports .pth files
* You can add the installation directory to the PYTHONPATH environment
variable. (It must then also be on PYTHONPATH whenever you run
Python and want to use the package(s) you are installing.)
* You can set up the installation directory to support ".pth" files by
using one of the approaches described here:
https://setuptools.readthedocs.io/en/latest/easy_install.html#custom-installation-locations
=====================================================================
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Main difference is that the drm driver now supports the hdmi output.
The gxl variant device tree has been renamed in:
commit 7eea67101b9713ae438955e8899b3c4b078419f9
Author: Kevin Hilman <khilman@baylibre.com>
Date: Fri Jan 20 07:57:52 2017 -0800
ARM64: dts: meson-gxl: rename Nexbox A95x for consistency
Since the GXL family has S905X and S905D SoCs, we're keeping the SoC
name in the DTS filename for clarity. Rename this file accordingly to
be consistent with the rest of the GXL DTS files.
Cc: Neil Armstrong <narmstrong@baylibre.com>
Reviewed-by: Andreas Färber <afaerber@suse.de>
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
So adjust the defconfig and boot script to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Though PyPI says the license is BSD, GitHub repo has an MIT license
file since April 2017 and upstream setup.py was also fixed.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the following patches:
* the Xtensa patches 870 and 871 are upstream now
* patch 942 was backported to GCC 6 branch
Note, that a bz2 release tarball is not provided anymore and is replaced by
a xz tarball file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libssh2 support mbedtls as crypto back-end library since version 1.8.0.
Default to mbedtls since it's smaller than either libgcrypt or openssl.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
- Extend pow tables for layer III to properly handle files with i-stereo and
5-bit scalefactors. Never observed them for real, just as fuzzed input to
trigger the read overflow. Note: This one goes on record as CVE-2017-11126,
calling remote denial of service. While the accesses are out of bounds for
the pow tables, they still are safely within libmpg123's memory (other
static tables). Just wrong values are used for computation, no actual crash
unless you use something like GCC's AddressSanitizer, nor any information
disclosure.
- Avoid left-shifts of negative integers in layer I decoding.
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop CVE 2017-9868 patch as that is now upstream.
1.4.14 is a bugfix release, fixing significant websocket performance /
correctness issues.
Use HTTPS for the download as the server uses HSTS, thus saving a redirect.
While we're at it, add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-7890 - Buffer over-read into uninitialized memory. The GIF
decoding function gdImageCreateFromGifCtx in gd_gif_in.c (which can be
reached with a call to the imagecreatefromstring() function) uses
constant-sized color tables of size 3 * 256, but does not zero-out these
arrays before use.
CVE-2017-9224, CVE-2017-9226, CVE-2017-9227, CVE-2017-9228, CVE-2017-9229 -
Out-of-bonds access in oniguruma regexp library.
CVE-2017-11144 - In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before
7.1.7, the openssl extension PEM sealing code did not check the return value
of the OpenSSL sealing function, which could lead to a crash of the PHP
interpreter, related to an interpretation conflict for a negative number in
ext/openssl/openssl.c, and an OpenSSL documentation omission.
CVE-2017-11145 - In PHP before 5.6.31, 7.x before 7.0.21, and 7.1.x before
7.1.7, lack of a bounds check in the date extension's timelib_meridian
parsing code could be used by attackers able to supply date strings to leak
information from the interpreter, related to an ext/date/lib/parse_date.c
out-of-bounds read affecting the php_parse_date function.
CVE-2017-11146 - In PHP through 5.6.31, 7.x through 7.0.21, and 7.1.x
through 7.1.7, lack of bounds checks in the date extension's
timelib_meridian parsing code could be used by attackers able to supply date
strings to leak information from the interpreter, related to
ext/date/lib/parse_date.c out-of-bounds reads affecting the php_parse_date
function. NOTE: this vulnerability exists because of an incomplete fix for
CVE-2017-11145.
While we're at it, add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patches fixing the following security issues:
CVE-2017-10971:
The endianess handling for X Events assumed a fixed size of X Event structures and
had a specific 32 byte stack buffer for that.
However "GenericEvents" can have any size, so if the events were sent in the wrong
endianess, this stack buffer could be overflowed easily.
So authenticated X users could overflow the stack in the X Server and with the X
server usually running as root gaining root prileveges.
CVE-2017-10972:
An information leak out of the X server due to an uninitialized stack area when swapping
event endianess.
For more details, see the advisory:
http://www.openwall.com/lists/oss-security/2017/07/06/6
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit b78b50465c, the initialisation
of BRTest.builddir was moved to the __init__ function. However, it is
set based on BRTest.outputdir and that is only set when the -o argument
is given to run-tests. When called as "run-tests -l", there is no -o
argument so BRTest.outputdir remains unset.
To fix, keep BRTest.builddir at None when BRTest.outputdir is None.
While we're at it, drop the direct access to the class member. If a
subclass wishes to set outputdir to something else before calling
BRTest.__init__, they are free to do so.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It makes no sense to default to an arbitrary path. In addition, it in
fact works correctly when it is empty. In that case, the toolchain will
be searched in PATH.
Update the help text to explain the above, and also that the compiler
is supposed to be in the bin subdirectory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BRTest's setUp() method contains a few assignments that initialize its
member variables. Since we will want to use these in test case
overrides, move them to the __init__ function.
Also allow the config member to be overridden, rather than always
taking the class member.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 14151d77af that eliminated
$(HOST_DIR)/usr seriously missed the toolchain-wrapper - only a single
reference was updated, the other three were missed. Commit
015d68c84c removed one more. This commit
finally removes the two remaining ones.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Up to now we created the $(HOST_DIR)/usr compatibility symlink as part
of the creation of $(HOST_DIR) itself. However, when the user specifies
a custom BR2_HOST_DIR, it is possible that the directory already exists
so this rule will never trigger.
Therefore, add an explicit rule for creating $(HOST_DIR)/usr and add
this rule to the dependencies of the dirs target. HOST_DIR itself goes
back to the standard rule for directories. The order-only dependency of
STAGING_DIR isn't needed any more either: HOST_DIR is implicitly
created if needed by mkdir -p, and we don't need to trigger the
HOST_DIR rule any more if the directory already exists.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tarballs of the releases are now again available:
https://www.spinics.net/lists/linux-i2c/msg30349.html
So change back to that instead of getting the source code from git.
While we're at it, add a hash for the license file.
[Peter: Also update Config.in homepage URL as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We had several remarks on the mailing list of users that were surprised
that patches were not applied for packages whose SITE_METHOD is local.
So document this.
Note that for OVERRIDE_SRCDIR itself it is already documented:
When Buildroot finds that for a given package, an
<pkg>_OVERRIDE_SRCDIR has been defined, it will no longer attempt to
download, extract and patch the package. Instead, it will directly use
the source code available in in the specified directory.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to U-Boot before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xtensa core configuration must be added to linux before it can be
built for that xtensa CPU variant. Extract configuration files from the
xtensa overlay as is done for other packages that need to be configured
for a specific xtensa core.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It can be interesting to get the overlay from a remote server, rather
than expect it to be present locally.
Since that file can be any URL, we can't know its hash, so we just
exclude it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
[Thomas: use DL_DIR instead of BR2_DL_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently, specifying a custom Xtrensa core is done with two variables:
- the core name
- the directory containing the overlay tarball
However, the core name only serves to construct the tarball name, and is
not used whatsoever to configure any of the toolchain components
(binutils, gcc or gdb), except through the files that are overlayed in
their respective source trees.
This has two main drawbacks:
- the overlay file must be named after the core,
- the tarball can not be compressed.
Furthermore, it also makes it extremely complex to implement a download
of that tarball.
So, those two variables can be squeezed into a single variable, that is
the complete path of the overlay tarball.
Update the qemu-xtensa defconfig accordingly.
Note: we do not add a legacy entry for BR2_XTENSA_CORE_NAME, since it
was previously a blind option in the last release, and there's been no
release since we removed BR2_XTENSA_CUSTOM_NAME. So, we just update the
legacy comments for BR2_XTENSA_CUSTOM_NAME, since that's all the user
could have seen in any of our releases so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is not needed to have an intermediate blind option, we can just
hide the prompt behind the same dependency as the non-blind symbol.
Update our qemu-xtensa defconfig acordingly (note: it was using
different values for both options, which is not possible; the blind
option was just set to the non-blind one in the .config).
Also remove an unneeded empty default for the BR2_XTENSA_OVERLAY_DIR
string option (strings are empty by default).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change deprecates the ext2/3/4 rootfs size in blocks symbol in
favor of one that mimic the fs-size argument behavior of mkfs (i.e.
size in a human readable format accepting k, m, g or t suffix or their
upper-case variants).
This change also updates the defconfigs that used to set
BR2_TARGET_ROOTFS_EXT2_BLOCKS symbol.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libressl is a fork of openssl from OpenSSL in 2014. Its goal is to
modernize the OpenSSL codebase, improve security, and apply best
practice development processes.
Right now, libressl is API compatible with OpenSSL 1.0.1, but does not
yet include all new APIs from OpenSSL 1.0.2 and later.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the advisory:
https://irssi.org/security/irssi_sa_2017_07.txt
Two vulnerabilities have been located in Irssi.
(a) When receiving messages with invalid time stamps, Irssi would try
to dereference a NULL pointer. Found by Brian 'geeknik' Carpenter
of Geeknik Labs. (CWE-690)
CVE-2017-10965 [2] was assigned to this bug
(b) While updating the internal nick list, Irssi may incorrectly use
the GHashTable interface and free the nick while updating it. This
will then result in use-after-free conditions on each access of
the hash table. Found by Brian 'geeknik' Carpenter of Geeknik
Labs. (CWE-416 caused by CWE-227)
CVE-2017-10966 [3] was assigned to this bug
Impact
------
(a) May result in denial of service (remote crash).
(b) Undefined behaviour.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While building I noticed:
>>> host-ccache 3.3.4 Building
conf.c: In function 'conf_create':
conf.c:314:2: warning: too many arguments for format [-Wformat-extra-args]
conf->cache_dir = format("/home/peko/.buildroot-ccache", get_home_directory());
^
As host-ccache gets installed into $(HOST_DIR) and is part of the SDK,
hardcoding the build user homedir isn't really nice for the relocatable
SDK feature (or simply for a SDK used by multiple users).
As the warning shows, CCache replaces "%s" with the current user home
directory, so rewrite BR_CACHE_DIR to use this feature if it begins with
$HOME.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We no longer have automatic derivation of DEPENDENCIES for host
packages, so the comment that we don't want a host-busybox dependency
is no longer valid.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Passing the option --shebangdir=/usr/bin to the configuration script adds the
CPP definition EXECLINE_SHEBANGPREFIX to
execline-x.y.z/src/include/execline/config.h. It is used by `s6-rc-compile` from
the s6-rc package to set the path to the execline interpreter in the scripts it
generates.
So, when building the host variant of execline, this path will be used in the
target service scripts generated by the host variant of `s6-rc-compile`. If not
forced to /usr/bin, the location of the execline interpreter on the target, it
will default to $(HOST_DIR)/bin thus leading to non-working scripts on the
target.
So, restore this option for the host variant.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since mtd was converted to the package infrastructure in commit
de4cf4e913 ("mtd: convert to gentargets,
add host package"), its host variant depended on host-e2fsprogs. At
the time, only a host variant of the mtd package was available.
When a target variant of mtd was introduced in commit
b50e0fa113 ("mtd: add option to build
mkfs.ubifs for target"), it depended on util-linux.
So today, the target variant continues to depend on util-linux, while
the host variant depends on e2fsprogs. What mkfs.ubifs really needs
is libuuid, which is provided by util-linux. It was in fact provided
by the fact that host-e2fsprogs depends on host-util-linux.
But really, host-e2fsprogs is not needed as a dependency, so use
host-util-linux to be consistent with the target variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain wrapper, when called through PATH, strips the last three
levels of /proc/self/exe to find HOST_DIR. However, after the host/usr
removal, this should be just two levels.
The toolchain wrapper has different logic for when it is called with a
full path (i.e. $HOST_DIR/usr/bin/arm-linux-gcc) then when it is called
through the PATH (i.e. just arm-linux-gcc). The latter is never used
internally in Buildroot, that's why this wasn't discovered through
testing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Mark Jackson <mpfj-list@newflow.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libgrcrypt is a direct dependency of WebKitGTK+, and as such it
should be selected.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add missing dependency on BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is needed for correctly building some CMake-based packages which
use this variable. For example, this is needed for WebKitGTK+ 2.16.x
to build correctly when an ARMv8 target is configured.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This file is not a package per-se, it includes other .mk files that
are packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The waf package infrastructure was not known by the pkg-stats script,
so let's add it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With 2000+ packages it's not trivial to identify i.e.:
- all packages that don't have a hash file;
- all packages that have patches;
- all packages that have code style warnings;
User experience can be improved by dynamically sorting the resulting
table.
There is an open-source solution that does that in the client-side and
requires minimal changes to our script: sorttable.js. The script is
MIT licensed as stated in its website.
Also add a hint to the user that the table can be sorted.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there is quite some duplication in the variables to be passed in
the make environment and as make options between the build and install
steps, this commit introduces LINUXPTP_MAKE_ENV and LINUXPTP_MAKE_OPTS
to avoid the duplication.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
incdefs.sh try to define some flags with user_flags() and kernel_flags()
functions. The later is looking at the kernel headers installed on the host
when KBUILD_OUTPUT is not set. If no kernel headers are installed on the host,
the grep fail and HAVE_ONESTEP_SYNC is not set on the command line:
see: grep: /usr/include/linux/net_tstamp.h: No such file or directory
So the missing.h define HWTSTAMP_TX_ONESTEP_SYNC which is also present in the
kernel headers installed in STAGING_DIR (toolchain w/ headers >= 3.2).
Indeed KBUILD_OUTPUT is empty because it's reset in the makefile, so move
KBUILD_OUTPUT in the enviroment while calling "make"/
Also set KBUILD_OUTPUT to STAGING_DIR to find net_tstamp.h.
While at it, use the same arguments for BUILD_CMDS and
INSTALL_TARGET_CMDS.
Thanks to Yann for the live review during the Buildroot summer camp.
Fixes:
http://autobuild.buildroot.net/results/364/36470db2c262d2e1fda5144a08cfe221831e093e
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Petr Kulhavy <brain@jikos.cz>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The XVISOR_ARCH check added in commit
117fd5dfbc ("xvisor: fix build on
AArch64") broke Buildroot entirely on all architectures except ARM,
AArch64 and x86-64, because the $(error ...) test was not enclosed
inside a condition that made sure the xvisor package was enabled.
This commit fixes that, and allows Buildroot to be usable again on all
architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 32bec8ee2f
("toolchain-external: copy ld*.so* for all C libraries") we changed
how the musl dynamic linker symbolic link was being created. Instead
of having specific logic in Buildroot, we switched to simply copying
the ld*.so.* symbolic link from staging to target, as well as the
target of this symbolic link.
However, it turns out that by default, musl creates its dynamic linker
symbolic link with an absolute path as the target of the link:
/lib/libc.so.
Therefore, external Musl toolchains built with Buildroot look like
this:
lrwxrwxrwx 1 thomas thomas 12 Jul 4 19:46 ld-musl-armhf.so.1 -> /lib/libc.so
The principle of the copy_toolchain_lib_root function, which is used
to copy libraries from staging to target, is to copy symbolic links
and follow their targets. In this case, it means we end up copying
/lib/libc.so (from the host machine) into the target folder. From
there on, there are two cases:
1. /lib/libc.so exists in your host system. It gets copied to the
target. But later on, Buildroot also copies /lib/libc.so from
staging to target, overwriting the bogus libc.so. So everything
works fine, even though it's admittedly ugly.
2. /lib/libc.so doesn't exist in your host system. In this case, the
build fails with no clear error message.
This problem does not happen with Musl toolchains built by
Crosstool-NG, because Crosstool-NG replaces the absolute target of the
dynamic linker symbolic link by a relative path.
However, since we want to support existing Buildroot Musl toolchains
and generally work with the fact that Musl by default installs an
absolute symlink, the following commit improves the
copy_toolchain_sysroot function to replace symbolic links with an
absolute destination to use a relative destination. I.e, in staging,
the ld-musl-armhf.so.1 symbolic link looks like this:
lrwxrwxrwx 1 thomas thomas 14 Jul 5 22:59 output/staging/lib/ld-musl-armhf.so.1 -> ../lib/libc.so
Fixes:
http://autobuild.buildroot.net/results/ce80264575918a8f71d9eab1091c21df85b65b1a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Xvisor was failing to build on AArch64 with:
package/xvisor/xvisor.mk:60: *** No Xvisor defconfig name specified, check your BR2_PACKAGE_XVISOR_DEFCONFIG setting. Stop.
The first problem is that the Config.in file had a typo: it was using
BR2_AARCH64 instead of BR2_aarch64, and therefore the
BR2_PACKAGE_XVISOR_DEFCONFIG variable had no value.
Once this is fixed, another problem occurs: the ARCH variable needs to
be specified as "arm" for XVisor, for both ARM and AArch64. Therefore,
a XVISOR_ARCH variable is introduced, which is calculated according to
the Buildroot configuration options. Only x86-64, arm and aarch64 are
supported by Xvisor currently, so it remains simple.
Fixes:
http://autobuild.buildroot.net/results/1719a63ff257f13634a06a14327abfb327984101/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for nanopi-m1 board
with below features
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit b3cc7e65ee, the definition of the DESTDIR variable was moved
down into the loop that follows symlinks in the libraries that are
copied to target. However, the corresponding mkdir was not moved down,
so that no directories are ever created.
In practice, this mkdir is normally redundant since the directories
should already have been created as part of creating STAGING_DIR.
Still, the current situation is clearly wrong, so fix it by moving the
mkdir down to after the assignment to DESTDIR.
While we're at it, also remove a redundant empty line. It's a leftover
from when a lot of variables were declared above.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This simply updates to the latest stable release. WebKitGTK+ versions
in the 2.1x series avoid bumping the dependencies in order to allow
distributions to provide updates, therefore no new dependencies are
needed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now all packages have been updated to install things in $(HOST_DIR)/lib
instead of $(HOST_DIR)/usr/lib, there should no longer be any reason
to have $(HOST_DIR)/usr/lib in the RPATH, so we don't allow it any more.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Wolfgang Grandegger <wg@grandegger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tools are now installed in host/bin instead of host/usr/bin.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This silences the annoying warning that there is no hash file for our
own COPYING file.
Also change the message so that it is more obvious what we're doing.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build passes the --shebangdir configure option, the target
build doesn't. With the removal of $(HOST_DIR)/usr, it is not clear
if this should be /bin or /usr/bin or $(HOST_DIR)/bin. Looking at the
source code, it turns out that this variable is not used at all, and
/usr/bin doesn't appear anywhere in the installed files.
Since it is not clear what this option should be set to, and it
anyway doesn't do anything, remove it entirely.
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
policycoreutils has a pretty peculiar interpretation of DESTDIR and
PREFIX. PREFIX is not consistently used: some installation paths and
include paths are forced to $(DESTDIR)/usr/... . In other cases,
PREFIX is indeed used. PREFIX defaults to $(DESTDIR)/usr
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: some things are
still installed in $(HOST_DIR)/usr - but nothing we care about (just
manpages, systemd services, ...). More importantly, however, it still
looks for e.g. D-Bus in $(DESTDIR)/usr/include/dbus-1.0.
Still, it's better than nothing.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
checkpolicy has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX simply defaults to $(DESTDIR)/usr, and is used in the rest of
the build system. DESTDIR isn't used any further.
For the host installation, we don't want the usr part, so set PREFIX
instead of DESTDIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libselinux has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . In other cases, PREFIX is indeed used. PREFIX
defaults to $(DESTDIR)/usr.
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: man pages are
still installed in $(HOST_DIR)/usr - but we don't care about that.
Also simplify the symlink creation, like how it's done in libsepol.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsemanage has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . In other cases, PREFIX is indeed used. PREFIX
defaults to $(DESTDIR)/usr
Try to be a little bit more correct by passing both DESTDIR and PREFIX,
both set to $(HOST_DIR). This is not a complete fix: man pages are
still installed in $(HOST_DIR)/usr - but we don't care about that.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
grub2 builds for the target but installs with DESTDIR=$(HOST_DIR). Since
we set prefix to /usr in TARGET_CONF_OPTS, this results in installing
things in $(HOST_DIR)/usr.
To make sure we don't install in $(HOST_DIR)/usr, override --prefix and
--exec-prefix.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
prefix defaults to /usr, so setting DESTDIR installs things in
$(HOST_DIR)/usr.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We have a patch that adds $(DESTDIR) to the install commands of
raspberrypi-usbboot, but it would still be installed in $(DESTDIR)/usr.
We don't want that, so remove the /usr part in the installation
commands.
Note that upstream has removed the 'install' target entirely, so
there's no point trying to keep the patch in upstreamable shape (i.e.
defaulting DESTDIR to /usr).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
genromfs is special because it uses "PREFIX" in the meaning of DESTDIR
and "prefix" in the meaning of prefix. We were up to know using it
incorrectly for host: PREFIX shouldn't be set and only prefix should
be set.
Add an explanatory comment for this unusual behaviour.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Manual change because the script uses ${OUTPUT_DIR}/host instead of
${HOST_DIR}.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l 'HOST_DIR}\?/usr/' board | xargs sed -i 's%\(HOST_DIR}\?\)/usr/%\1/%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\$(HOST_DIR)/usr%$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/share' | xargs sed -i 's%$(HOST_DIR)/usr/share%$(HOST_DIR)/share%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/include' | xargs sed -i 's%$(HOST_DIR)/usr/include%$(HOST_DIR)/include%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/lib' | xargs sed -i 's%$(HOST_DIR)/usr/lib%$(HOST_DIR)/lib%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/sbin' | xargs sed -i 's%$(HOST_DIR)/usr/sbin%$(HOST_DIR)/sbin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
This is a mechanical change with
git grep -l '$(HOST_DIR)/usr/bin' | xargs sed -i 's%$(HOST_DIR)/usr/bin%$(HOST_DIR)/bin%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
This is a mechanical change with
git grep -l '\$(HOST_DIR)/usr' | xargs sed -i 's%\(prefix\|PREFIX\)=\("\?\)\$(HOST_DIR)/usr%\1=\2$(HOST_DIR)%g'
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FEATURE_CLEAN_UP is a configuration feature to get busybox to explicitly
call free() on dynamic allocated memory just before exiting so memory leak
detectors like valgrind don't get confused. Upstream explicitly recommends
to NOT enable this option:
config FEATURE_CLEAN_UP
bool "Clean up all memory before exiting (usually not needed)"
default n
help
As a size optimization, busybox normally exits without explicitly
freeing dynamically allocated memory or closing files. This saves
space since the OS will clean up for us, but it can confuse debuggers
like valgrind, which report tons of memory and resource leaks.
Don't enable this unless you have a really good reason to clean
things up manually.
Having this option enabled adds a bit of bloat, but more significantly these
cleanup code paths don't get tested very often so some times get out of sync
with the allocation code which can lead to crashes (or security issues from
double frees), so it is safer to disable the option.
For people wanting to debug memory leak issues with busybox, the option can
still be enabled with a configuration fragment (or a custom config).
The size difference isn't huge (br-arm-full-static):
-rwxr-xr-x 1 peko peko 886K Jul 5 10:56 output-busybox1/target/bin/busybox
-rwxr-xr-x 1 peko peko 882K Jul 5 10:53 output-busybox2/target/bin/busybox
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In copy_toolchain_sysroot, if no ld.so has been found in the
STAGING_DIR after the sysroot copy, we look at ARCH_SYSROOT_DIR if a
ld.so is available there. We do this for both ld*.so and ld*.so.*.
However, when copying thing from staging to target (as listed in
TOOLCHAIN_EXTERNAL_LIBS), we only match on ld*.so.*. This would mean
that even if a dynamic linker matching ld*.so but not ld*.so.* was
copied into staging by copy_toolchain_sysroot, it would anyway not be
copied to the target filesystem, making the system unusable.
Therefore, we can remove the special case on ld*.so, and keep only
ld*.so.*.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgcc_s.so is now added to TOOLCHAIN_EXTERNAL_LIBS for glibc/uclibc
in one place, and for musl in another place. Bottom line: it should be
in TOOLCHAIN_EXTERNAL_LIBS unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, for the dynamic loader, we're copying ld*.so* for glibc and
uClibc, except for glibc/EABIhf where we are explicitly copying
ld-linux-armhf.so.*. For musl, we're not copying the dynamic linker
because it's simply a symbolic link to libc.so. However, the name of
the musl dynamic linker changes from one architecture to the other,
and we don't handle all cases.
Since handling the musl dynamic linker symlink creation is becoming
more and more annoying to maintain, this commit makes musl use the
same mechanism as glibc/uClibc: put the dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS.
In addition, the special condition on glibc/EABIhf was added in
11ec38b695 ("toolchain-external: fix
Linaro ARM toolchain support") because an old Linaro toolchain had two
dynamic loaders, and we wanted to copy only one. But 1/ this is old
and 2/ having the two dynamic linkers doesn't really matter.
So this commit simply unconditionally adds "ld*.so*" to
TOOLCHAIN_EXTERNAL_LIBS, regardless of the C library being chosen. It
re-uses the musl dynamic linker symlink from the sysroot, which makes
it always correct, and allows us to remove the
TOOLCHAIN_EXTERNAL_MUSL_LD_LINK hook, and all the related logic.
This commit therefore solves two problems with the musl dynamic linker
symbolic link creation logic:
1 We support all architectures, without having to hardcode in
Buildroot the mapping between the CPU architecture and the
corresponding dynamic linker name. For example, our current logic
was not handling the mips64+n32 ABI case, where the dynamic linker
is named ld-musl-mipsn32el.so.1.
2 We support Crosstool-NG musl toolchains, where the dynamic linker
is in /lib, but libc.so is in /usr/lib.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit therefore replaces:
- https://patchwork.ozlabs.org/patch/780411/ (was another solution
for solving problem 1 above)
- https://patchwork.ozlabs.org/patch/763977/ and
https://patchwork.ozlabs.org/patch/748974/ (was another solution
for solving problem 2 above)
copy_toolchain_lib_root copies libraries from staging to target,
resolving and copying symbolic links along the way.
The most inner loop, a "while" loop, starts from an initial name, and
if it's a symbolic link, gets resolved to the target, and the loop
iterates until we reach a real file. However, the destination folder
where the symbolic link or real file is created is computed in DESTDIR
only once, before this loop starts. Therefore, this loop works fine
when all symbolic links in the chain, and the real file all belong to
the same directory. But it doesn't do the correct thing when the
symbolic link and/or real file are in different folder.
An example is Crosstool-NG musl toolchains, where the dynamic loader
is in /lib/ld-musl*.so but points to ../usr/lib/libc.so. With the
current logic, we copy /lib/ld-musl*.so to /lib, but we also copy
libc.so to /lib instead of the expected /usr/lib.
This currently doesn't cause any problem because the musl dynamic
linker is manually created by the TOOLCHAIN_EXTERNAL_MUSL_LD_LINK
hook. However, this logic has a number of problems, so in a followup
commit, we are going to put the musl dynamic linker in
TOOLCHAIN_EXTERNAL_LIBS, which will cause it to be copied by
copy_toolchain_lib_root. But we obviously want the link and its target
to be copied to the right place, hence this fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
These tests simply build a system with musl and uclibc toolchains, and
boot them under qemu. It allows to minimally validate that our support
for musl/uclibc external toolchains is working. We already had some
tests covering glibc toolchains, so we can now easily test that all
three C libraries are supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
This commit is part of the series, as I've written/used those tests to
validate that things are still working correctly with all of glibc,
uclibc and musl toolchains.
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
$(PKG)_ERLANG_LIBDIR is problematic because it is used both for host
and staging/target. Therefore, the usr/ part is removed from it, and
added the the callers instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of python packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move toolchainfile.cmake and Buildroot.cmake from
$(HOST_DIR)/usr/share/buildroot to $(HOST_DIR)/share/buildroot.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of cmake packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the redundant usr/ component of the HOST_DIR paths. Since a
previous commit added a symlink from $(HOST_DIR)/usr to $(HOST_DIR),
everything keeps on working.
Build-tested with a bunch of autotools packages.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since things are no longer installed in $(HOST_DIR)/usr, the callers
should also not refer to it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/lib and $(HOST_DIR)/usr/lib are the same directory, it
doesn't make sense to pass both to LDFLAGS.
Also use $(HOST_DIR)/lib instead of $(HOST_DIR)/usr/lib for the RPATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now $(HOST_DIR)/usr is a symlink to $(HOST_DIR), it makes no sense to
still have it in BR_PATH.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since $(HOST_DIR)/usr/{bin,sbin} are now symlinks to
$(HOST_DIR)/{bin,sbin}, it makes no sense to check them - they are
already covered.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently use $(HOST_DIR)/usr as the prefix for host packages. That
has a few disadvantages:
- There are some things installed in $(HOST_DIR)/etc and
$(HOST_DIR)/sbin, which is inconsistent.
- To pack a buildroot-built toolchain into a tarball for use as an
external toolchain, you have to pack output/host/usr instead of the
more obvious output/host.
- Because of the above, the internal toolchain wrapper breaks which
forces us to work around it (call the actual toolchain executable
directly). This is OK for us, but when used in another build system,
that's a problem.
- Paths are four characters longer.
To allow us to gradually eliminate $(HOST_DIR)/usr while building
packages, replace it with a symlink to .
The symlinks from $(HOST_DIR)/usr/$(GNU_TARGET_NAME) and
$(HOST_DIR)/usr/lib that were added previously are removed again.
Note that the symlink creation will break when $(HOST_DIR)/usr
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we have to update the
external toolchain wrapper and the external toolchain symlinks to go
one directory less up. Indeed, $(HOST_DIR) is one level less up than
it was before.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into $(HOST_DIR)/usr/lib without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/lib to ../lib.
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
At the same time as creating this symlink, we also have to update the
check-host-rpath script to accept both $(HOST_DIR)/usr/lib and
$(HOST_DIR)/lib, because depending on how the package derives the
path, it may be different.
Since there are some dependency chains that involve $(STAGING_DIR),
$(STAGING_DIR) may in fact be created before $(HOST_DIR). Since
$(STAGING_DIR) is a subdirectory of $(HOST_DIR), it is possible that the
newly added rule for $(HOST_DIR) never triggers. To make sure that the
rule does trigger, add an order-only dependency from $(STAGING_DIR) to
$(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a step towards eliminating $(HOST_DIR)/usr. It allows us to
convert all packages installing things into
$(HOST_DIR)/usr/$(GNU_TARGET_NAME) (i.e., binutils and gcc) without
affecting the rest.
To allow compatibility with packages that still use $(HOST_DIR)/usr as
the prefix, create a symlink from usr/$(GNU_TARGET_NAME) to
../$(GNU_TARGET_NAME).
Note that the symlink creation will break when $(HOST_DIR)/usr/lib
already exists as a directory, i.e. when rebuilding in an existing
output directory. This is necessary: if we don't break it now, the
following commits (which remove the usr part from various variables)
_will_ break it.
Effectively, the usr/ part is removed from $(STAGING_SUBDIR) (and
therefore from $(STAGING_DIR)), so update the definition of that
variable right away.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gettext revamp has some user-visible changes, so this commit
updates the CHANGES file to document them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The way gettext is handled in Buildroot has significantly changed,
with changes visible to packages. This commit updates the relevant
section of the manual to document how packages should now interact
with the gettext support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that all packages have been migrated to the new gettext logic, we
can remove the BR2_NEEDS_GETTEXT and BR2_NEEDS_GETTEXT_IF_LOCALE
variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
patch and special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Patch
0001-Makefile-fix-static-linking-issue-with-lintl.patch was added to
allow passing -lintl through LIBS, in a place that works for static
linking.
However, for dynamic linking, we can simply pass -lintl through the
existing LDFLAGS variable, as it was done prior to commit
38bfd129c6 ("package/net-tools: fix
static linking issue with lintl").
This commit does that and gets rid of the now useless patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the patch
that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We no longer support building the full-blown libintl in static linking
scenarios, as it causes too many problems. Therefore, remove the
special code in e2fsprogs that was handling this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection, which means we no longer
need to depend on BR2_USE_WCHAR, so this dependency is dropped
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Carlos Santos <casantos@datacom.ind.br>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- pass --with-libintl-prefix only when a separate libintl library is
available
- dropping BR2_PACKAGE_GETTEXT selection
- removing a musl-specific workaround. Indeed, when NLS is enabled,
we now have the full-blown libintl, even with the musl C library
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection. Thanks to this, we can drop
the BR2_USE_WCHAR dependency
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
whether NLS support is enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection. The BR2_USE_WCHAR
dependency was only needed for gettext, so it is no longer needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is not needed: libbfd is now properly linked against libintl, so
libintl is pulled in automatically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection. We adjust the comment
explaining the BR2_USE_WCHAR dependency, since gettext is no longer
the reason for this dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies on
gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves
using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies on
gettext/host-gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using BR2_SYSTEM_ENABLE_NLS instead of BR2_ENABLE_LOCALE to decide
if NLS support should be enabled or not
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
The BR2_USE_WCHAR dependency was needed for gettext, now that we no
longer need gettext, we can also get rid of this dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of relying on binutils
depending on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
In addition, we now use BR2_SYSTEM_ENABLE_NLS instead of
BR2_ENABLE_LOCALE to decide if NLS support should be enabled or
disabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
The BR2_USE_WCHAR dependency was only needed for gettext. But now, we
no longer need gettext unconditionally, so this dependency on
BR2_USE_WCHAR is removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit uses TARGET_NLS_DEPENDENCIES instead of existing logic to
add the dependency on gettext. To keep the existing behavior, we keep
the --with-libintl-prefix option, but only when a libintl library is
effectively provided by gettext.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl. This wasn't
done so far, but is needed for the build to work, because uClibc
now has a stub gettext implementation, which is mistaken as being
the full gettext implementation by the configure script
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Note that -lpthread is no longer needed for -lintl, but axel uses
pthread directly anyway, so we have to keep -lpthread as part of
LDFLAGS.
Finally, we now use BR2_SYSTEM_ENABLE_NLS to decide whether NLS
support should be enabled or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit switches to use the new gettext logic, which involves:
- using TARGET_NLS_DEPENDENCIES instead of hand-encoded dependencies
on gettext/host-gettext
- using TARGET_NLS_LIBS to force linking against libintl
- dropping BR2_PACKAGE_GETTEXT selection
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The build system use PKG_CHECK_MODULES.
checking pkg-config is at least version 0.9.0... ./configure: line 16886: output/host/usr/bin/pkg-config: No such file or directory
no
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mkfs is now capable of generating rootfs images. Use mkfs instead of
genext2fs.
If not set, we now let mkfs calculate the block size and the number of
inodes needed.
This change also adjusts the options to meet those of mkfs.
Notes:
* Passing a null inode number to mkfs triggers its automatic calculation.
* Passing a fs-size with no unit suffix to mkfs is interpreted as using
1K block size.
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: don't pass PATH when calling mkfs.ext, just call it directly
from $(HOST_DIR)/usr/sbin, as suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Soon, the ext{2,3,4} rootfs image will no longer be generated with
genext2fs, but using mke2fs instead which has no support for the extra
inode number option.
So, deprecate the BR2_TARGET_ROOTFS_EXT2_EXTRA_INODES option and
recommend, in lieu, to set the total inode number, taking account of
the extra ones if needed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the stdout and stderr streams are redirected, it is not
immediately obvious when a build failed, even though brmake really exits
with the same error code as make did.
When there is an error, print the exit code after the elapsed time.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ifupdown scripts can be used independently of the init system, be it
sysv, busybox or systemd; they could even be used when there is no init
system (i.e. the user is providing his own).
Currently, those ifupdown scripts are bundled in the skeleton.
But we soon will have a skeleton specific to systemd, so we would be
missing those scripts (when systemd-networkd is not enabled).
So, move those scripts to their own package.
To keep the current behaviour (before it is changed in future commits),
we make that package default to y, but depend on the default skeleton.
Instead of being a target-finalize hook, the scripts are installed as
any other package are, with a package install-target command.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: drop empty IFUPDOWN_SCRIPTS_SOURCE]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, we had no support for full NLS with the musl C library:
BR2_NEEDS_GETTEXT was only true for uClibc. But the musl C library
provides a stub gettext implementation, which some packages were
failing to recognize as being usable, and therefore we are passing
autoconf cache variables to hint those packages that yes, the C
library has a usable gettext implementation.
However, we are going to enable full NLS support for musl, by giving
the possibility to build gettext libintl with musl. In such a case, we
do not want packages to use the gettext implementation of the C
library, but really the one provided by gettext libintl.
Therefore, we should only pre-seed the
gt_cv_func_gnugettext1_libc*=yes variables if we're on musl but
without gettext libintl. Otherwise packages will fail building because:
- libintl.h is the one from the full-blown gettext implementation, so
it assumes the package will link against -lintl
- the package thinks gettext is provided by the C library, so it
doesn't link with -lintl
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All packages that can use NLS support will have to depend on
host-gettext, as it provides the tools for generating .mo files from
.po files.
In addition, all packages may need to depend on gettext (and link with
-lintl) if the full-blown gettext implementation is provided by
libintl and not by the C library.
In order to avoid repeating such conditions everywhere, this commit
introduces two variables:
- TARGET_NLS_DEPENDENCIES, which packages that may use NLS support
should unconditionally add to their <pkg>_DEPENDENCIES variable.
- TARGET_NLS_LIBS, which packages can use to pass through LIBS or
LDFLAGS when the package build system needs help to realize that it
should link against libintl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, the option BR2_ENABLE_LOCALE was more-or-less controlling
whether NLS support was enabled in packages. More precisely, if
BR2_ENABLE_LOCALE=y, we were not doing anything (so some packages
could have NLS support enabled, some not). And only when
BR2_ENABLE_LOCALE was disabled we were explicitly passing
--disable-nls to packages.
This doesn't make much sense, and there is no reason to tie NLS
support to locale support. You may want locale support, but not
necessarily NLS support. Therefore, this commit introduces
BR2_SYSTEM_ENABLE_NLS, which allows to enable/disable NLS support
globally. When this option is enabled, we pass --enable-nls to
packages, otherwise we pass --disable-nls.
In addition, when this option is enabled and the C library doesn't
provide a full-blown implementation of gettext, we select the gettext
package, which will provide the full blown implementation.
It is worth mentioning that this commit has a visible impact for users:
- Prior to this commit, as soon as BR2_ENABLE_LOCALE=y, packages
*could* provide NLS support. It was up to each package to decide
whether they wanted to provide NLS support or not (we were not
passing --enable-nls nor --disable-nls).
- After this commit, it's BR2_SYSTEM_ENABLE_NLS that controls whether
NLS is enabled or disabled, and this option is disabled by default.
Bottom line: with the default of BR2_SYSTEM_ENABLE_NLS disabled, some
packages may lose NLS support that they used to provide. But we
believe it's a reasonable default behavior for Buildroot, where
generally NLS support is not necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to use DISABLE_NLS not only for disabling NLS support,
but also to explicitly enable it. Therefore, this preparatory commit
renames it to NLS_OPTS, which is consistent with other foo_OPTS
variables defined in package/Makefile.in.
While at it, we replace the := assignments by regular = assignments.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces a hidden option
BR2_PACKAGE_GETTEXT_PROVIDES_INTL that is used by gettext.mk to force
the build of libintl if the toolchain doesn't provide a full gettext
implementation.
For now, this hidden option is not selected by anything, but a
follow-up commit will introduce BR2_ENABLE_NLS, which will make use of
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new boolean is true if the toolchain provides a built-in
full-featured implementation of gettext (glibc), and false if only a
stub implementation is provided (uclibc, musl).
This will be used in follow-up commits to decide whether libintl needs
to be built by gettext or not.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to avoid having to bring libintl from gettext whenever you
want to build a program that needs it, uClibc-ng now provides a stub
implementation of the gettext functions in uClibc-ng itself. This
brings uClibc-ng in the same situation as musl.
This will fix a lot of build failures related to static linking with
libintl, and generally is a first step to simplify our gettext
handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ushare is not an autoconf/automake based package, so it does not have
the standard behavior of autoconf that every enable/disable option
supports both --enable-foo and --disable-foo.
For example, it supports --disable-nls, but not
--enable-nls. Currently, DISABLE_NLS is either empty or --disable-nls,
but this will be changed in a follow-up commit. As a preparation, this
commit modifies ushare to no longer use DISABLE_NLS, but instead
calculate itself whether --disable-nls should be passed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We are going to pass --enable-nls to all autotools packages when NLS
support is enabled globally. However, lvm2 NLS support doesn't build,
and anyway lvm2 doesn't provide any useful translation files, so we
force disable NLS support for this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The comment that explains why we were defining HOST_FLEX_DEPENDENCIES
instead of inheriting from FLEX_DEPENDENCIES no longer makes sense,
since we remove such automatic inheritance of host dependencies from
target dependencies a while ago.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, libglib enables some fairly aggressive warnings, treated
as errors. In particular, the -Wformat=2 warning triggers a warning
due to the return value of the ngettext() macro from uClibc libintl
stub not being understood as being potentially a format string.
So, before we enable the stub libintl in uClibc, we disable such
warnings. A bug will be reported to upstream uClibc to get the actual
bug fixed, but disabling compiler warnings treated as errors is anyway
a good thing in the context of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The size parameter from sock_recvmsg() was removed from Linux kernel
API since 4.7. This commit adjusts the existing
0004-Port-one-one_udp.c-to-Linux-4.1.patch to fix the build with Linux
>= 4.7.
Signed-off-by: Matthew Shyu <matthew.shyu@amlogic.com>
[Thomas: improved commit title/log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The file "qt.conf" can be used to override the hard-coded paths that are
compiled into the Qt library. We need it to make "qmake" relocatable.
CC: Julien Corjon <corjon.j@ecagroup.com>
CC: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- use | instead of \ as sed separator, suggested by Arnout.
- fix indentation, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It will install the script "relocate-sdk.sh" in the HOST_DIR
allowing to adjust the path to the SDK directory in all text
files after it has been moved to a new location.
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- Fix shebang to be /bin/sh instead of /bin/bash, suggested by Arnout
- Use | instead of \ as a separator for sed expressions, suggested by
Arnout, discussed with Wolfgang and others
- Remove ./ at the beginning of LOCFILE, suggested by Arnout
- Fix comment about the path check being made before doing the
replacement, suggested by Arnout
- Fix indentation, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-8372 - The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to cause a
denial of service (assertion failure and application exit) via a crafted
audio file.
CVE-2017-8373 - The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted audio file.
CVE-2017-8374 - The mad_bit_skip function in bit.c in Underbit MAD libmad
0.15.1b allows remote attackers to cause a denial of service (heap-based
buffer over-read and application crash) via a crafted audio file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove non-existant configure options:
--disable-sphinx-doc:
Even if it looks like there is some code for that in configure.ac, it
seems that is not taken into account and that configure option is not
even recognized.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dtls plugin needs openssl, so move it down to the "plugins with external
dependencies" section to match the rest of the plugins.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove non-existant or unnecessary configure options:
--disable-oggtest, --disable-vorbistest:
It looks like these options will be taken into account by ogg.m4 and
vorbis.m4 only when ogg and vobis are enabled. However, according to
the code on those m4 files these two options are disabled by default.
--disable-gio_unix_2_0:
I don't know where this option comes from.
--disable-freetypetest:
183610c035
[Peter: add rawparse plugin]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the WebRTC plugin option was introduced in commit
ee267886bc ("gst1-plugins-bad: enable
webrtc plugin"), it was incorrect added as "webrtc", while the actual
name of the plugin and corresponding configure option is "webrtcdsp".
This commit therefore fixes the .mk file to use the correct name. And
also, since we want to keep Buildroot option consistent with the name
of the GStreamer plugins, it renames the Config.in option as well, and
introduces the necessary Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though no timezone implicitly means UTC, systemd is not all that
happy when it does not have a timezone set. This is all fine on a RW
filesystem because systemd will create a symlink on its own (to
Etc/UTC), but not so much on a RO filesystem, causing all kind of
issues at boot time (up to the point that the system is unusable).
We fix that by requiring that the timezone is actually set. The check is
done by verifying that the timezone file is an actual file; if not set,
the test would find a directory and would thus fail.
Update the help entry accordingly.
Also fix indentation in tzdata.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Cc: Martin Bark <martin@barkynet.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ext filesystems can use a block size of 1024, 2048, or 4096 bytes, the
former being interesting to store small files, while the latter being
more intersting to store bigger files.
So far, we were using the default, which was to use a 1024-byte block.
Continue doing so (for now...).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The previous default, zero, just meant "use the default value of the
filesystem generator", which happened to be 5% (the traditional value
for all ext-creating tools we've ever seen).
So, change the new default accordingly to 5%.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, leaving the number of inodes to be autocalculated requires
the user to not specify the -i option at all.
Also accept zero as meaning auto; this will help simplify the ext2.mk
code a little bit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsepol has a pretty peculiar interpretation of DESTDIR and PREFIX.
PREFIX is not consistently used: some installation paths are forced to
$(DESTDIR)/usr/... . Also, the shared lib symlink is forced to ../../lib
(i.e. assumes it's installed under /usr). For these reasons, the host
build and install commands are a bit unusual: they use DESTDIR instead
of PREFIX, DESTDIR points to $(HOST_DIR) without /usr, and some
additional fixup is needed to correct the installation directory of
libsepol.so.1 and the symlink to it.
This can be simplified quite a lot by passing both DESTDIR and PREFIX,
and including the /usr part in both. The symlink still has to be fixed,
but that's much simpler.
Note that a side effect is that the man pages are now installed under
$(HOST_DIR)/usr/usr/man. While not very nice, we don't really care
about man pages. In addition, this will resolve itself when we later
move $(HOST_DIR)/usr to $(HOST_DIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sometimes $(1)/$($(PKG)_ERLANG_LIBDIR) is used, sometimes
$(1)$($(PKG)_ERLANG_LIBDIR). Make this consistent, with /. Therefore,
remove the leading / from $($(PKG)_ERLANG_LIBDIR).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The individual binaries option of busybox allows for the applets
that would usually be symlinks to be built as individual applications
that link against a shared library.
This feature is needed for SELinux to allow the applications to run
under the correct SELinux context.
The patch being added allows the individual applications to be
installed and will be upstreamed to the busybox developers.
The initial work for this change was done by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- add help text in Config.in option.
- rename BUSYBOX_CONFIGURE_INDIVIDUAL_BINARIES to
BUSYBOX_SET_INDIVIDUAL_BINARIES to be consistent with other
variables.
- call BUSYBOX_INSTALL_INDIVIDUAL_BINARIES in
BUSYBOX_INSTALL_TARGET_CMDS, not in BUSYBOX_INSTALL_INIT_SYSV.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout:
- revert to the "optional file" approach in makedevs;
- reword Config.in comment text to match our usual pattern;
- abbreviate comment about how suid applets are found a little;
- all applets are optional (each one may have been unselected from the
busybox config).]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: remove /usr/share/udhcpc/default.script from BUSYBOX_PERMISSIONS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The utils provided by this package were formerly packaged with libva.
Libva contained a patch not to compile mpeg2vldemo to reduce
dependencies by avoiding C++, this patch is not moved to this package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pngquant's homegrown configure script doesn't understand CC with a
space, so we can't use ccache with it. Only the host variant is
affected: for the target, we call ccache from the toolchain-wrapper so
it's transparent to the configure script.
This wasn't seen in the autobuilders since they never enable
BR2_CCACHE.
To test, use any configuration and do
make BR2_CCACHE=y host-pngquant
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: Mention that openssl is a runtime dependency,
Add license info as noted by Romain, add gpl-2.0.txt,
Add comment explaining the missing build step,
Use install -t for x509-types files]
Signed-off-by: Julien Viard de Galbert <julien@vdg.name>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1c6/1c69c77d7b378f6f76790fb5ca0078d0db0c40f8
devmem2 is a single C file that is downloaded as-is, and we patch it.
We also use that file as the license file.
Thus, the file when it is downloaded has a specific hash, but when
saved by legal-info, it has a different hash.
However, we can't store two different hashes for the same _filename_
with different content.
So, we extract the license file as a pre-patch hook, and store it in a
separate file, for which we can now add a hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/e1b/e1b3dee917f5ab3961f3dea006720431444d0ef5/
cache-calibrator is a single C file that is downloaded as-is, and we
patch it. We also use that file as the license file.
Thus, the file when it is downloaded has a specific hash, but when
saved by legal-info, it has a different hash.
However, we can't store two different hashes for the same _filename_
with different content.
So, we extract the license file as a pre-patch hook, and store it in a
separate file, for which we can now add a hash.
[Peter: add autobuilder reference]
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
- Avoid memset(NULL, 0, 0) to calm down the paranoid.
- Fix bug 252, invalid read of size 1 in ID3v2 parser due to forgotten
offset from the frame flag bytes (unnoticed in practice for a long time).
Fuzzers are in the house again. This one got CVE-2017-10683.
https://sourceforge.net/p/mpg123/bugs/252/
- Avoid a mostly harmless conditional jump depending on uninitialised
fr->lay in compute_bpf() (mpg123_position()) when track is not ready yet.
- Fix undefined shifts on signed long mask in layer3.c (worked in practice,
never right in theory). Code might be a bit faster now, even. Thanks to
Agostino Sarubbo for reporting.
dlopen() is now directly used to load output modules (and the
--with-modules-suffix option has been removed), so adjust the modules logic
to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
avcodec 2.2.x, as used in VideoLAN VLC media player 2.2.7-x before
2017-06-29, allows out-of-bounds heap memory write due to calling memcpy()
with a wrong size, leading to a denial of service (application crash) or
possibly code execution.
https://trac.videolan.org/vlc/ticket/18467
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpwquality adds cracklib to its _DEPENDENCIES, but forgot to select it in
Config.in, leading to build failures if cracklib isn't explicitly enabled:
Makefile:536: *** cracklib is in the dependency chain of libpwquality that
has added it to its _DEPENDENCIES variable without selecting it or depending
on it from Config.in. Stop.
No autobuilder references as this error happens before build-time.log is
written, causing the autobuilder to ignore the build result.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will help catch a change of license even if the filename does
not change.
For now, a missing hash for the license files is not a fatal error, to
let people catch up and add them. When we switch to make it mandatory,
we can simplify the code by just removing the case statement.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the per-package legal-info is mostly silent, but we're soon
to add a check for the hashes of the license files.
In that case, and when there is a hash mis-match, we want a user to know
what package had a changed license file.
So, we add a call to MESSAGE to display the package we're currently
saving the legal-info of, like so:
>>> busybox 1.26.2 Collecting legal info
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we check that the filenames in hash lists do not contain
a slash '/' character, because all we are checking so far are the
downloaded archives, and we explicitly need the filename to not contain
a directory component at all.
However, we're soon to also check the hashes of the license files in
packages sources, and those license files may be at any arbitrary
directory-depth in the packages source tree.
[Peter: Remove reference to files with same basename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Rahul Bedarkar <rahulbedarkar89@gmail.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using -ef to check for the same file is nicer than relying on a magic
symlink-to-fakedate.
Notice that -ef isn't stricly posix (but supported by bash/dash/zsh), so
I've changed the shebang to /bin/bash.
While we are at it, restructure the logic to do a single exec at the end
instead of handling the epoch/!epoch cases differently for simplicity.
With that out of the way we can directly install it as $HOST/usr/bin/date
instead of the fakedate / date symlink.
[Peter: drop IFS=: change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to error out instead of running menuconfig when no .config
is available broke an existing use case:
make O=output-foo; cd output-foo; br-init-conf (or similar to get a sensible .config); make
As there is no wrapper makefile in output-foo.
Fix it by ensuring the wrapper gets created if needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, cut prints the entire line if the specified delimiter is not
present at all:
$ printf "foo bar" | cut -d' ' -f2
bar
$ printf "foobar" | cut -d' ' -f2
foobar
In setlocalversion, cut is presented with the output of 'hg id' which has
the format:
"<revision> <tags-if-any>"
If the current revision is not tagged, the output of 'hg id' does not
contain the delimiter (space), cut prints the entire string, and
setlocalversion thinks the version is the tag.
As setlocalversion does not print anything for tagged versions, there is no
output overall, and no correct indication of the mercurial revision.
Fix by passing the extra cut option '--only-delimited', which suppresses
output if no delimiter is found.
This problem likely went unnoticed for so long, because the tag 'tip' (i.e.
most recent revision of the branch) is treated specially: in this case the
mercurial revision _is_ printed, i.e. the situation is treated as
'untagged'.
The problem is only seen when you are _not_ at the most recent revision in
your branch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds the Qt virtualkeyboard package.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Thomas:
- use SDPX license codes
- add entry to DEVELOPERS file
- drop BR2_PACKAGE_QT5BASE_LICENSE_APPROVED logic, since we removed this option
- select BR2_PACKAGE_QT5DECLARATIVE and
BR2_PACKAGE_QT5DECLARATIVE_QUICK instead of using a "depends on"
and propagate the appropriate dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop 0001-tools-make_rel_symlink.py-can-also-use-python2.patch. Build requires
host-python3 since the previous version bump.
Drop upstream 0002-lircd-Remove-use-of-functions-killed-in-kernel-4.8.0.patch.
Add a patch fixing header guard macro collision with musl libc.
Set HAVE_WORKING_POLL to skip poll(2) run test that is not compatible with
cross compilation.
Add optional dependency on libftdi1.
Cc: Rhys Williams <github@wilberforce.co.nz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patches downloaded from Github are not stable, so bring them in the
tree.
For this package, the patch is not replaced 1:1 with what Github was
providing. Indeed, the URL
4740f3341a.patch
no longer exists. This pull request has been merged, so we instead use
the real upstream commits. However, the upstream developer apparently
messed up, and applied the change in two separate commits, which is
why one patch fetched from Github is replaced by this commit by two
patches in package/sngrep/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the manual about hashes, fixing a number of
issues:
- Adding the .hash file should no longer be optional: it *must* be
added. Therefore the wording "You can add ..." is changed to "When
possible, you must add ...".
- We are now checking hashes for Git downloaded packages, so fix this
as well, and indicate more clearly which download methods have hash
checking.
- We no longer want to have auto-generated patches be downloaded
through <pkg>_PATCH because such patches are not stable over time,
and their hash can change. For example, downloading patches from
github.com should no longer be done.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the JSON1 SQLite extensions. This extension allows SQLite to
store and query JSON objects in a database.
Signed-off-by: Bradford Barr <bradford@density.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3142: An error in TSIG authentication can permit unauthorized zone
transfers
An attacker who is able to send and receive messages to an authoritative DNS
server and who has knowledge of a valid TSIG key name may be able to
circumvent TSIG authentication of AXFR requests via a carefully constructed
request packet. A server that relies solely on TSIG keys for protection with
no other ACL protection could be manipulated into:
* providing an AXFR of a zone to an unauthorized recipient
* accepting bogus NOTIFY packets
https://kb.isc.org/article/AA-01504/74/CVE-2017-3142
CVE-2017-3041: An error in TSIG authentication can permit unauthorized dynamic
updates
An attacker who is able to send and receive messages to an authoritative DNS
server and who has knowledge of a valid TSIG key name for the zone and service
being targeted may be able to manipulate BIND into accepting an unauthorized
dynamic update.
https://kb.isc.org/article/AA-01503/74/CVE-2017-3143
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For Gitlab-CI, we want to avoid re-generating the minimal install to
be able to run tests all the time. So let's create a docker image that
we can post on Docker Hub and then pull.
For the time being, this is just what we need for running our CI. Later
we can produce something that is also useful for users.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves our .gitlab-ci.yml logic to execute our runtime
tests located in support/testing/. To do so, this commit:
- Adds more Debian packages to be installed, namely the nose2 and
pexpect packages needed by the runtime testing infrastructure, as
well as the necessary Qemu emulators
- The description of how to run the runtime tests. Each test is
executed as a separate Gitlab CI job, so that the status of each
test is easily visible in the Gitlab CI web interface.
- The Makefile is improved to auto-generate .gitlab-ci.yml from
.gitlab-ci.yml.in, like we're doing for defconfigs. Since the
dependencies of .gitlab-ci.yml are no longer correct, we abandon
them and instead make it a PHONY target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Arnout: simplify .gitlab-ci.in a little, removing redundant stuff;
make .gitlab-ci.yml a PHONY target]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If $(BR2_PACKAGE_HAS_HOST_FOO) is defined, then the pkg-virtual
infrastructure will check if $(BR2_PACKAGE_PROVIDES_HOST_FOO) is not
empty.
But later, $(BR2_PACKAGE_HOST_FOO_DEPENDENCIES) will be set from
$(BR2_PACKAGE_PROVIDES_FOO), ignoring $(BR2_PACKAGE_PROVIDES_HOST_FOO).
So fix this discrepancy by setting $(BR2_PACKAGE_HOST_FOO_DEPENDENCIES)
from $(BR2_PACKAGE_PROVIDES_FOO) only if $(BR2_PACKAGE_PROVIDES_HOST_FOO)
is empty.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add comments suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Despite newer versions being available, this patch creates a package
for version 2017-05-05, because newer version have issues that need to
be addressed.
Still, the projects install target installs the wrong files, so custom
commands are needed for staging_install and target_install.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"$ORIGIN/../../usr/lib" is also a valid RPATH for binaries in
"$hostdir/usr/bin". After RPATH sanitation, all RPATH
directories start with "$ORIGIN".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the bump of the Atmel defconfigs to linux4sam_5.6 in commit
0f7b5d4a9f, the new U-Boot version uses
the Device Tree compiler, so we need to add BR2_TARGET_UBOOT_NEEDS_DTC
in order to build dtc before u-boot and avoid build failures.
Fixes:
>>> uboot linux4sam_5.6 Configuring
>>> uboot linux4sam_5.6 Building
[...]
CHK include/generated/timestamp_autogenerated.h
UPD include/generated/timestamp_autogenerated.h
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit e51d69a3b (mosquitto: specify that hash is taken from upstream)
changed the .hash description header, but the upstream hash only applies
to the tarball, not the patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a major release, but the API seems to be mostly
backwards-compatible. The only package depending on this library in
buildroot is libsigrok and it builds fine.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patches are now upstream and can be removed. Remove the comment
about Qt4 - it's no longer valid. Add boost-serialization to
dependencies.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems the ! is removed by the yaml parser, so it needs to be quoted.
While we're at it, add some explanatory comment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Latest release fixed dlmopen detection, so that
musl/uClibc-ng toolchains can be used.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When getdeveloperlib.parse_developers doesn't find anything, the script
tries sys.exit(1) but sys is not imported.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-DEVELOPERS test would always fail, because && will return
the exit code of the left-hand side if not 0, so it *always* returns
1.
But in fact, the test can be simplified quite a lot: we can run
getdeveloper directly, without arguments. That should just print
'No action specified', but it will also print any syntax errors it
encountered. So we can just 'grep -v' the expected output away; if
there is anything more, grep will return 0, but if there is nothing
more, it will return 1. So we just need to invert the result.
Incidentally, this also fixes the incorrect remaining reference to
support/scripts.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were still some references to the old location of the scripts in
the manual. Replace them by utils/.
While we're at it, remove the redundant ./ at the beginning of some of
the example commands.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There were still references to support/scripts/ for scripts that have
moved to the utils directory. There were also references that were
updated, but not re-updated when the tools moves to utils.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5Multimedia builds the alsa plugin if it detects libasound in the
system. Add alsa-lib to dependencies if BR2_PACKAGE_ALSA_LIB is
selected.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt5Multimedia includes support for pulseaudio if it detects libpulse
and libpulse-mainloop-glib in the system at build-time. We need to
depend on pulseaudio and libglib2 if it is selected.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 67117adc89 backed out the
deployment of libmtd headers (libmtd.h, libubi.h, ubi-media.h) to
staging and these may be needed by packages that work directly with MTD,
for example swupdate. mtd also produces libmtd.a and libubi.a which are
needed by those packages.
Tested by configuring swupdate to use MTD and verifying that swupdate
now compiles and links.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
[Thomas: change to a post-install staging hook, and add comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After some discussion, we found out that "tools" has the four first
letters identical to the "toolchain" subfolder, which makes it a bit
unpractical with tab-completion. So, this commit renames "tools" to
"utils", which is more tab-completion-friendly.
This has been discussed with Arnout and Yann.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add brmake, a small script that redirects the build output log to a
file, keeping just Buildroot's own messages, with the date+time added
at the start of the line.
We need to unbuffer the output of make so that, when the script is
interrupted (SIGINT, ^C), there is no lingering output not yet digested
by the logger loop.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Chakra Divi <chakra@openedev.com>
[Thomas: remove host-uboot-tools from defconfig, already pulled by
BR2_TARGET_UBOOT_BOOT_SCRIPT, remove trailing whitespace.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When running multiple instances of emulator in parallel, the login
prompt can take some time to appear.
Use a large timeout when waiting for the prompt to avoid random
failures.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Let the user to pass -t to set the number of testcases to run
simultaneously.
When -j is not specified, calculate it to split the available cores
between the simultaneous testcases.
Example of auto calculated -j for cpu_count 8:
-t -j total
1 9 9
2 4 8
3 3 9
4 2 8
>=5 1 t
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the parameter logfile is passed to spawn(), pexpect sends both
stdin and stdout to the logfile and it creates a double echo effect.
One way to avoid the double echo in the logfile would be to disable the
echo on the terminal just after login ("stty -echo"), but double echo of
user and password would remain.
Instead of that, send only the stdout to the logfile using the
logfile_read property.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of redirecting qemu serial to telnet, redirect it to stdio.
It allows to run testcases in parallel without random failing caused by
two emulators trying to use the same telnet port (1234).
'qemu -serial stdio' returns some extra <CR> characters, so remove them
from the log.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace subprocess + telnetlib with pexpect.
Use the telnet installed on the host machine instead of telnetlib, while
the serial from qemu is not yet redirected to stdio.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This verifies that the DEVELOPERS file doesn't contain errors. It
just runs parse_developers from getdeveloperlib and errors out if
that produces any output.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, we have a choice to select between stripping and not
stripping. This is legacy code from back when we had a third option,
sstrip (super-strip).
Since we removed sstrip, stripping or not stripping is now just a
boolean rather than a choice.
Make it so.
We make BR2_STRIP_strip default to 'y' to keep the current behaviour of
defaulting to stripping.
Move BR2_STIP_none to legacy, and instruct the user to review the new
setting.
Drop any reference to BR2_STRIP_none in comments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some cases, passing STRIP=true is not sufficient to disable striping
altogether, as some (incorrectly generated?) configure scripts will
ignore a ${STRIP} that is not a full path.
This is the case, for example, for nmap, which ends up using the host
strip command when we pass STRIP=true:
checking for arm-buildroot-linux-gnueabihf-strip... no
checking for strip... /usr/bin/strip
configure: WARNING: using cross tools not prefixed with host triplet
[--SNIP--]
/usr/bin/install -c -c -m 755 nping /home/ymorin/dev/buildroot/O/target/usr/bin/nping
/usr/bin/strip -x /home/ymorin/dev/buildroot/O/target/usr/bin/nping
/usr/bin/strip: Unable to recognise the format of the input file `/home/ymorin/dev/buildroot/O/target/usr/bin/nping'
We fix that by forcing a full path to the strip sommand when it is
disabled: STRIP=/bin/true
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RAUC is the Robust Auto-Update Controller developed by the folks at
Pengutronix. It supports updating embedded systems from the network
(ex: HawkBit) or from a disk and provides a d-bus interface.
Signed-off-by: Andrey Yurovsky <yurovsky@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upgrade the Xen package to Xen 4.9.0. This also means we can remove
almost all of the patches we were previously carrying.
Signed-off-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
_mmc on defconfig files in engicam need to drop and same follow on
other engicam defconfig files.
So, this patch rename engicam_imx6ul_isiot_mmc_defconfig to
engicam_imx6ul_isiot_defconfig which is missing in commit "board: Add
support for Engicam Is.IoT MX6UL SOM" (sha1:
0235bc6176)
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since forever, we run 'menuconfig' automatically on an unconfigured
tree. However, this does not help users that much:
- If they read the documentation, they should already know to run
make menuconfig first.
- If they haven't read the documentation, dropping them in menuconfig
isn't very helpful.
- It's a likely that the user didn't intend to be in an unconfigured
tree (e.g. wrong O= specified), so starting menuconfig (and polluting
this wrong O= directory) is not very helpful.
- It's possible that the user really doesn't want menuconfig, but
instead needs xconfig, or some defconfig, or ...
So, instead of trying to guess what the user needs, print an error and
let the user decide what to do next.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported by Alessandro Power on StackOverflow [1], the behaviour
of "make toolchain" in an unconfigured tree is misleading.
When .config doesn't exist, we don't read in the package .mk files, so
"make <package>" doesn't work:
$ make busybox
make: *** No rule to make target 'busybox'. Stop.
However, for "linux" and "toolchain", the corresponding file (or
actually directory) already exists. So instead, we get:
$ make linux
make: Nothing to be done for 'linux'.
This is confusing, because it looks as if the build succeeded.
The obvious solution is to make linux and toolchain PHONY targets when
.config doesn't exist. However, that actually does the reverse, because
then a rule _does_ exist for them and since they don't have
dependencies, make will consider them to be ready.
Therefore, we also have to provide an explicit rule for them, and
explicitly error out. Thise behaviour is still different from other
packages, but at least it is much less confusing.
[1] https://stackoverflow.com/questions/44521150
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As all librt and libpthread functions are integrated into
libc for a while, workaround no longer required.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the bump of gnu-efi from 3.0.5 to 3.0.6, patch 0008 in the
syslinux package is no longer needed. More specifically, it's commit
bf07e8141777e5a2d67ec8447084215224bdad4b in upstream gnu-efi that
fixed the underlying issue.
Signed-off-by: Benoît Allard <benoit.allard@greenbone.net>
[Thomas: add better commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glibc contains a vulnerability that allows specially crafted LD_LIBRARY_PATH
values to manipulate the heap/stack, causing them to alias, potentially
resulting in arbitrary code execution. Please note that additional
hardening changes have been made to glibc to prevent manipulation of stack
and heap memory but these issues are not directly exploitable, as such they
have not been given a CVE.
https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
Patches are identical to upstream, except that the ChangeLog modifications
have been stripped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-9868: In Mosquitto through 1.4.12, mosquitto.db (aka the
persistence file) is world readable, which allows local users to obtain
sensitive MQTT topic information.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a fix for CVE-2017-9445: In systemd through 233, certain sizes passed to
dns_packet_new in systemd-resolved can cause it to allocate a buffer that's
too small. A malicious DNS server can exploit this via a response with a
specially crafted TCP payload to trick systemd-resolved into allocating a
buffer that's too small, and subsequently write arbitrary data beyond the
end of it.
The other patch fixes an issue with the security fix.
[Peter: use CVE description from MITRE]
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tmpfile support is optional in systemd but the dhcp server install it's
config file in $(TARGET_DIR)/usr/lib/tmpfiles.d directory when systemd
is used as init system.
So it seems that dhcp server require tmpfile support for systemd based
system.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the BR2_CMAKE_CANDIDATES variable, containing a list of candidates
to check and use as BR2_CMAKE, if possible.
This allows using "cmake3" on CentOS 7, whose default cmake corresponds
to version 2.8.12. Example:
$ make BR2_CMAKE_CANDIDATES="cmake cmake3"
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is useful on CentOS 7 whose "cmake" package provides cmake 2.8.12,
which is too old, but the "cmake3" package (from EPEL) provides version
3.6.3, which is satisfactory. Examples:
$ sh support/dependencies/check-host-cmake.sh 2.8 cmake cmake3
/usr/bin/cmake
$ sh support/dependencies/check-host-cmake.sh 3.1 cmake cmake3
/usr/bin/cmake3
$ sh support/dependencies/check-host-cmake.sh 3.8 cmake cmake3
(nothing)
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes a problem where it was not possible to replace
/etc/shadow with a symlink to a e.g. a user partition where the
shadow file is placed. This is required, e.g. for systems where the
rootfs is mounted read-only but users should still be able to be
added. Thus, if within an filesystem overlay setup a user tries
to replace /etc/shadow with a symlink to the real file on a user
partition a buildroot build stops with an error message because
sed is called on the symlink instead of following the symlink.
This commit fixes this shortcoming.
Signed-off-by: Jens Maus <mail@jens-maus.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not support uClibc-ng/musl C library version choice support,
do the same for GNU C Library.
No legacy handling required as only version choice is removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: move 3.2 kernel headers dependency to the libc choice in
toolchain/toolchain-buildroot/Config.in file, and added a Config.in
comment about it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam Is.IoT MX6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools/host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam GEAM6UL SOM board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Create board/engicam/icorem6 for i.CoreM6 supported files.
and update the readme.txt so-that it can list i.CoreM6 board
details.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 Quad/Dual/DualLite/Solo RQS
board with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: add missing host-dosfstools and host-mtools.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A VFAT filesystem is described in the genimage configuration file, so
we need host-dosfstools and host-mtools enabled in the defconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add initial support for Engicam i.CoreM6 DualLite/Solo board
with below features:
- U-Boot 2017.07-rc1
- Linux 4.11.5
- Default packages from buildroot
U-Boot 2017.07-rc1 has common u-boot defconfig for All i.CoreM6
variant boards, so this patch update the same along with
buildroot defconfig that reflect the common name.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Forward port 0001-link-against-libintl.patch. Since now autoreconf works, move
the patch from Makefile.in to Makefile.am. Also, convert to git format.
Remove 0002-no-__progname.patch. Buildroot default uClibc and musl now provide
__progname.
Add a patch that adds the git-version-gen script to fix autoreconf.
Remove upstream patch.
Upstream switched to .xz tarballs.
Add upstream provided hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add host-pkgconf to dependencies as we now use PKG_CHECK_MODULES in
configure.ac.
Changelog for v0.3:
New features:
- gpiomon can now watch multiple lines at the same time and supports custom
output formats which can be specified using the --format argument
- testing framework can now test external programs: test cases for gpio-tools
have been added
Improvements:
- improve error messages
- improve README examples
- configure script improvements
Bug fixes:
- use correct UAPI flags when requesting line events
Also includes bug fixes from v0.2.1:
Bug fixes:
- capitalize 'GPIO' in error messages in gpioset, gpioget & gpiomon
- tweak the error message on invalid arguments in gpiofind
- don't ignore superfluous arguments and fix the displayed name for falling
edge events in gpiomon
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The two patches are no longer needed with the latest upstream version,
so bump to the latest one.
Tested on imx6.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Add a patch to revert the assumption that ncursesw headers are under
/usr/include/ncursesw/ only. That's necessary to have both versions
for ABI/API compatibility but does not make sense on embedded systems.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
The patch is a bit drastic but it solves the problem of using ncursews
while we discuss a better solution in the util-linux mailing list.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2016-9577
Frediano Ziglio of Red Hat discovered a buffer overflow
vulnerability in the main_channel_alloc_msg_rcv_buf function. An
authenticated attacker can take advantage of this flaw to cause a
denial of service (spice server crash), or possibly, execute
arbitrary code.
CVE-2016-9578
Frediano Ziglio of Red Hat discovered that spice does not properly
validate incoming messages. An attacker able to connect to the
spice server could send crafted messages which would cause the
process to crash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2016-0749: The smartcard interaction in SPICE allows remote attackers to
cause a denial of service (QEMU-KVM process crash) or possibly execute
arbitrary code via vectors related to connecting to a guest VM, which
triggers a heap-based buffer overflow.
CVE-2016-2150: SPICE allows local guest OS users to read from or write to
arbitrary host memory locations via crafted primary surface parameters, a
similar issue to CVE-2015-5261.
The pyparsing check has been dropped from configure, and the spice protocol
definition is again included, so the workarounds can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2015-3247: Race condition in the worker_update_monitors_config function
in SPICE 0.12.4 allows a remote authenticated guest user to cause a denial
of service (heap-based memory corruption and QEMU-KVM crash) or possibly
execute arbitrary code on the host via unspecified vectors.
CVE-2015-5260: Heap-based buffer overflow in SPICE before 0.12.6 allows
guest OS users to cause a denial of service (heap-based memory corruption
and QEMU-KVM crash) or possibly execute arbitrary code on the host via QXL
commands related to the surface_id parameter.
CVE-2015-5261: Heap-based buffer overflow in SPICE before 0.12.6 allows
guest OS users to read and write to arbitrary memory locations on the host
via guest QXL commands related to surface creation.
Client/gui support is gone upstream (moved to spice-gtk / virt-viewer), so
add Config.in.legacy handling for them.
Lz4 is a new optional dependency, so handle it.
The spice protocol definition is no longer included and instead used from
spice-protocol. The build system uses pkg-config --variable=codegendir to
find the build time path of this, which doesn't take our STAGING_DIR prefix
into consideration, so it needs some help. The installed protocol
definition will likewise be newer than the generated files, so we need to
workaround that to ensure they are not regenerated (which needs host python
/ pyparsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tunneling support is gone upstream, so drop the patch and add
Config.in.legacy handling for the option.
Celt051 is no longer a hard dependency, and opus is a new optional
dependency, so adjust the dependencies to match.
Python / pyparsing are not needed as the tarball contains the generated
files (this should presumably have been host-python in the first place as
these are used at build time), but we need a small workaround to convince
configure that they really aren't needed.
Alsa-lib is only needed for client support, and the configure script checks
for X11/Xext/Xrender, so adjust the dependencies to match.
A user manual is now generated by default if asciidoc is available, so
explicitly disable that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of a custom post-build script, use the boot script generation
logic of the U-Boot package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
More and more of our defconfigs need to generate a U-Boot boot
script. It's a simple call to mkimage, but we already have 12
instances of this logic in board/, and there are patch series waiting
in patchwork adding 3 more boards that need this.
So let's add an option in the U-Boot package to generate such a boot
script image easily.
Note that we assume a single script needs to be generated, and the
output file name is boot.scr. The only platform for which it seems to
not be the case are the Boundary Devices platforms: they generate two
boot scripts, 6x_bootscript and 6x_upgrade, but they are anyway
installed inside TARGET_DIR, not BINARIES_DIR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0006 is no longer needed as the fix is already upstream.
Confirmed that the colors are displayed correctly when running the
Qt5CinematicDemo application on i.mx6.
Patch 0007 is already applied upstream.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for a13_olinuxino board
with below features
- U-Boot 2017.05
- Linux 4.11.5
- Default packages from buildroot
Signed-off-by: Chakra Divi <chakra@openedev.com>
Reviewed-by: Jagan Teki <jagan@amarulasolutions.com>
[Thomas:
- use full name in DEVELOPERS file
- remove parametrization of the post-build.sh script, just hardcode
the boot.cmd file used as input
- add missing dosfstools and mtools host packages in defconfig,
needed because a vfat partition is defined in the genimage.cfg
file
- minor tweaks to readme.txt file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch backports two patches that have been sent upstream as a pull
request in order to fix sshd for MIPS64 n32.
The first patch adds support for detecting the MIPS ABI during the
configure phase.
The second patch sets the right value to seccomp_audit_arch taking into
account the MIPS64 ABI.
Currently seccomp_audit_arch is set to AUDIT_ARCH_MIPS64 or
AUDIT_ARCH_MIPSEL64 (depending on the endinness) when openssh is built
for MIPS64. However, that's only valid for n64 ABI. The right macros for
n32 ABI defined in seccomp.h are AUDIT_ARCH_MIPS64N32 and
AUDIT_ARCH_MIPSEL64N32, for big and little endian respectively.
Because of that an sshd built for MIPS64 n32 rejects connection attempts
and the output of strace reveals that the problem is related to seccomp
audit:
[pid 194] prctl(PR_SET_SECCOMP, SECCOMP_MODE_FILTER, {len=57,
filter=0x555d5da0}) = 0
[pid 194] write(7, "\0\0\0]\0\0\0\5\0\0\0Ulist_hostkey_types: "..., 97) = ?
[pid 193] <... poll resumed> ) = 2 ([{fd=5, revents=POLLIN|POLLHUP},
{fd=6, revents=POLLHUP}])
[pid 194] +++ killed by SIGSYS +++
Pull request: https://github.com/openssh/openssh-portable/pull/71
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support for specifying multiple image files in
BR2_TARGET_BAREBOX_IMAGE_FILE config option.
This is useful for boards with several RAM size variants.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
[Thomas: rename internal variable from $(1)_IMAGE_FILE to
$(1)_IMAGE_FILES.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default bootargs have changed in U-Boot for this board. Build U-Boot
environment and add it to the SD card image to update bootargs.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
at91sam9x5ek_mmc board was missing in the previous patch adding 1M
offset for FAT partition to solve some boot issues with the ROM code.
Signed-off-by: Ludovic Desroches <ludovic.desroches@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream uploaded a new tarball with the same version number 2016-09-08,
some time after the update to v2.0.9 in buildroot. Someone noticed, but
upstream set the ticket to wontfix, and promised to do better in the
future: https://sourceforge.net/p/iperf2/tickets/20/
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-1000381: The c-ares function `ares_parse_naptr_reply()`, which is
used for parsing NAPTR responses, could be triggered to read memory outside
of the given input buffer if the passed in DNS response packet was crafted
in a particular way.
https://c-ares.haxx.se/adv_20170620.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
remove input-tools, it has been obsoleted by linuxconsoletools
linuxconsoletools uses the same name as upstream and carries
the latest version of the tools installed by input-tools.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2017-3167: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
use of the ap_get_basic_auth_pw() by third-party modules outside of the
authentication phase may lead to authentication requirements being bypassed.
CVE-2017-3169: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_ssl may dereference a NULL pointer when third-party modules call
ap_hook_process_connection() during an HTTP request to an HTTPS port.
CVE-2017-7659: A maliciously constructed HTTP/2 request could cause
mod_http2 to dereference a NULL pointer and crash the server process.
CVE-2017-7668: The HTTP strict parsing changes added in Apache httpd 2.2.32
and 2.4.24 introduced a bug in token list parsing, which allows
ap_find_token() to search past the end of its input string. By maliciously
crafting a sequence of request headers, an attacker may be able to cause a
segmentation fault, or to force ap_find_token() to return an incorrect
value.
CVE-2017-7679: In Apache httpd 2.2.x before 2.2.33 and 2.4.x before 2.4.26,
mod_mime can read one byte past the end of a buffer when sending a malicious
Content-Type response header.
While we're at it, use the upstream sha256 checksum instead of sha1.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following security issues:
CVE-2017-3140 is a denial-of-service vulnerability affecting 9.9.10,
9.10.5, 9.11.0->9.11.1, 9.9.10-S1, and 9.10.5-S1 when configured with
Response Policy Zones (RPZ) utilizing NSIP or NSDNAME rules.
https://kb.isc.org/article/AA-01495/74/CVE-2017-3140
CVE-2017-3141 is a Windows privilege escalation vector affecting
9.2.6-P2+, 9.3.2-P1+, 9.4.x, 9.5.x, 9.6.x, 9.7.x, 9.8.x, 9.9.0->9.9.10,
9.10.0->9.10.5, 9.11.0->9.11.1, 9.9.3-S1->9.9.10-S1, and 9.10.5-S1. The
BIND Windows installer failed to properly quote the service paths,
possibly allowing a local user to achieve privilege escalation, if
allowed by file system permissions.
https://kb.isc.org/article/AA-01496/74/CVE-2017-3141
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway supports many different transports, and currently there
is no implicit way to turn them off or on. Instead, if the dependency
happens to be built, then the transport is enabled.
Create a transports section in the config file and add
BR2_PACKAGE_JANUS_REST as the first transport.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: propagate thread dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Such a construct allows to bail out if the installation of one of the
program fails, which the current shell-based for loop doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This revision includes:
- Moving from a handwritten makefile to autotools.
- Restructuring and cleaning up the source tree.
- Fixing the problems that the patches in the package/mtd directory fixed.
Changes:
- Move from generic-package to autotools-package in mtd.mk.
- Remove no longer necessary patches.
- Update binary locations in mtd.mk
- Update library/header locations in mtd.mk
- Remove MTD_ADD_MISSING_LINTL definition from mtd.mk, as it's no longer
needed.
Tested with toolchains compiled with musl, uclibc, and glibc.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: additional improvements
- introduce hidden options BR2_PACKAGE_MTD_JFFS_UTILS,
BR2_PACKAGE_MTD_UBIFS_UTILS and BR2_PACKAGE_MTD_TESTS that match the
./configure options of mtd. Those hidden options select the
appropriate dependencies checked by the configure script, and are
selected by the existing per-tool Config.in options.
- .mk file is changed to handle properly the new hidden options
BR2_PACKAGE_MTD_JFFS_UTILS, BR2_PACKAGE_MTD_UBIFS_UTILS and
BR2_PACKAGE_MTD_TESTS.
- .mk file is changed to properly handle BR2_PACKAGE_ACL, by passing
--with-xattr/--without-xattr.
- remove HOST_MTD_BUILD_CMDS and HOST_MTD_INSTALL_CMDS, those are no
longer needed since we have an autotools-package now.
- MTD_STAGING_y and MTD_INSTALL_STAGING_CMDS are removed, we use the
default staging installation commands, that install everything that
is needed.
- the MTD_TARGETS_UBI_y variable is merged into MTD_TARGETS_y, as we no
longer need to distinguish both.
- integck installation logic is moved into MTD_TARGETS_y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In buildroot ffmpeg uses x264 as optional dependency if
BR2_PACKAGE_FFMPEG_GPL is enabled at the same time.
If BR2_PACKAGE_FFMPEG_GPL is disabled and ffmpeg is built without x264
support before x264 itself is build, x264 picks up certain ffmpeg libs
as optional dependency leading to build errors because x264 does not
correctly link statically against ffmpeg.
To avoid a circular dependency and to avoid teaching x264 how to
correctly link statically with ffmpeg we just disable all ffmpeg-
related options.
Fixes
http://autobuild.buildroot.net/results/36a/36abb5b8f3aab57fb7b63056b216b4a58143ee3e/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to check whether librt is required for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot no longer supports toolchains with glibc older than 2.17, so there
is no need to link with librt for clock_* system calls.
The following patches are not renumbered. The noise is too high.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CodeSourcery x86 and sh, the ADI Blackfin, and the Xilinx Mircoblaze
external toolchain profiles have all been removed. Update the manual.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery sh toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since glibc 2.17, executable link command need not include the -lrt option for
clock_* system calls. As a result, over time less and less software packages
bother to check whether to toolchain needs -lrt. We are now at a point where
maintainers refuse to add this complexity into their build system. This
requires Buildroot to carry patches fixing this issue indefinitely.
glibc 2.17 is now 4.5 years old. There is no reason to use an older version
with current software.
This commit removes the predefined profile for CodeSourcery x86 toolchain that
is based on glibc 2.16. One may still use the custom external toolchain
support in Buildroot to get this toolchain back, and deal with any build
issues that this toolchain causes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add patch to fix following error:
| ../../libtirpc-1.0.1/src/xdr_sizeof.c:93:13: error: 'uintptr_t' undeclared (first use in this function); did you mean '__intptr_t'?
| if (len < (uintptr_t)xdrs->x_base) {
| ^~~~~~~~~
This error occurs with the latest glibc master version (during the testing I had
glibc commit 92bd70fb85bce57ac47ba5d8af008736832c955a), but doesn't occur with
version 2.25.
Patch includes stdint.h to provide uintptr_t.
It has been submitted upstream:
https://sourceforge.net/p/libtirpc/mailman/message/35850276/
Signed-off-by: Dmitrii Kolesnichenko <dmitrii@synopsys.com>
[Thomas: reformat as Git formatted patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot and linux kernel are too old to build with gcc 6.
Fit it by backporting the following commits:
- u-boot: 9b2c282b34 (compiler*.h: sync include/linux/compiler*.h with Linux 4.5-rc6)
- linux: cb984d101b (compiler-gcc: integrate the various compiler-gcc[345].h files)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package provides a kernel module and utilities in order to use
v4l2loopback virtual devices. This module allows you to create
"virtual video devices" normal (v4l2) applications will read these
devices as if they were ordinary video devices, but the video will not
be read from e.g. a capture card but instead it is generated by
another application.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We already have an option for selecting sntp support in ntp that can be
chosen from the menuconfig, and ntp's configure script has a --with-sntp
option (with its --without counterpart) which can be used for disabling
sntp support in ntp. However, we are not using it. This patch will make
use of it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure option --with-ncurses has been removed in version 1.0.0
and thus is no longer needed.
Signed-off-by: Rodrigo Rebello <rprebello@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-9468 - Joseph Bisch discovered that Irssi does not properly handle
DCC messages without source nick/host. A malicious IRC server can take
advantage of this flaw to cause Irssi to crash, resulting in a denial of
service.
CVE-2017-9469 - Joseph Bisch discovered that Irssi does not properly handle
receiving incorrectly quoted DCC files. A remote attacker can take
advantage of this flaw to cause Irssi to crash, resulting in a denial of
service.
See https://irssi.org/security/irssi_sa_2017_06.txt for more details.
Remove 0001-Get-back-to-using-pkg-config-to-check-for-OpenSSL.patch as it
applied upstream and drop autoreconf as configure.ac is no longer patched.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
- CVE-2017-9233 - External entity infinite loop DoS. See:
https://libexpat.github.io/doc/cve-2017-9233/
- CVE-2016-9063 -- Detect integer overflow
And further more:
- Fix regression from fix to CVE-2016-0718 cutting off longer tag names.
- Extend fix for CVE-2016-5300 (use getrandom() if available).
- Extend fix for CVE-2012-0876 (Change hash algorithm to William Ahern's
version of SipHash).
Also add an upstream patch to fix detection of getrandom().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently building full gdb for MIPS musl fails because it's trying to
include <sgidefs.h> which is provided by glibc and uClibc, but not by
musl.
However, the kernel headers provide <asm/sgidefs.h> which has the same
definitions, so we can use that one instead.
Backporting a patch that has been sent upstream. Taken from here:
https://sourceware.org/bugzilla/show_bug.cgi?id=21070
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linuxconsoletools contains the inputattach utility
to attach legacy serial devices to the Linux kernel
input layer and joystick utilities to calibrate and
test joysticks and joypads.
The buildroot package adds options to build only certain
tools.
website: http://sf.net/projects/linuxconsole/
Signed-off-by: Koen Martens <gmc@sonologic.nl>
[Thomas: minor tweaks to Config.in and .mk file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 28d97609b2 ("configs/qemu:
bump to the latest kernel version") updated most qemu defconfigs to
use Linux 4.11. However, for the SH4 configurations, Linux 4.9 was
kept, because 4.11 apparently has an issue.
Unfortunately, while the defconfigs for SH4 were unchanged, the Linux
kernel configuration file was renamed from linux-4.9.config to
linux-4.11.config.
This commit renames the Linux configuration files back to their
previous name, linux-4.9.config, matching what the Qemu SH4 defconfigs
specify.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kvazaar is an open-source HEVC encoder licensed under LGPLv2.1.
This provides tools to encode raw video into HEVC stream.
website: http://ultravideo.cs.tut.fi/
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
[Thomas: add --without-cryptopp to explicitly disable support for this
optional dependency, use SPDX license code, fix Config.in]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Update the "basic set" description to include fincore, which is built
by default, and remove tailf, which was removed in this version.
- Add configuration options for the new utilities "chmem" and "lsmem".
- Remove patch already applied upstream.
- Drop autoreconf, since the patch on term-utils/Makemodule.am is gone.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tool was hosted at fedorahosted.org which was shut down in early
2017. According to a private conversation with the upstream maintainer,
the new home for this tool is on infradead.org so far. So the SITE was
adapted accordingly.
Additionally the version was bumped from 1.4 to current master. This
allows to drop one build patch. The other patches were recreated with
Git.
Cc: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig as the u-boot doesn't contain commit 9b2c282b34 (compiler*.h: sync
include/linux/compiler*.h with Linux 4.5-rc6) which was added during the
2016.03 cycle.
Fix the build by bumping u-boot to 2017.05.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The board has an ethernet interface, so enable DHCP for it.
The used flash chip uses 16K erase blocks, so use that for JFFS2:
mtdinfo -a
..
mtd5
Name: user
Type: nand
Eraseblock size: 16384 bytes, 16.0 KiB
Amount of eraseblocks: 1915 (31375360 bytes, 29.9 MiB)
Minimum input/output unit size: 512 bytes
Sub-page size: 256 bytes
OOB size: 16 bytes
Character device major/minor: 90:10
Bad blocks are allowed: true
Device is writable: true
While we're at it, add a readme explaining how to build and upload the build
to the board.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent change to default to gcc 6 for the internal toolchain broke this
defconfig, as the kernel doesn't contain commit cb984d101b (compiler-gcc:
integrate the various compiler-gcc[345].h files) which was added during the
4.2 cycle.
Fix the build by bumping the kernel to 4.11.5.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ARM_TRUSTED_FIRMWARE_MAKE_TARGET is expanded, but it's never assigned
so it is always empty. On the other hand the make targets are defined
in ARM_TRUSTED_FIRMWARE_MAKE_OPTS, which should contain options, not
targets.
Clean it all up by moving the targets in the proper place, replacing
the useless $(ARM_TRUSTED_FIRMWARE_MAKE_TARGET).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Running glmark2 on imx6 with kernel 4.11.4 and Mesa 17.1.2 leads to
a segmentation fault.
Apply Lucas Stach's patch to fix the problem while upstream glmark2
doesn't get fixed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Recent setuptools versions require bootstrap.py to be invoked
before the standard setup process. So create such pre configure
hooks for both host and target versions.
Change download location to GitHub because setuptools doesn't
provide *.tar.gz any longer.
Fix legal info. setuptools is now licensed under MIT licence.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZC706 defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq MicroZed defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build-tested only]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Zynq ZedBoard defconfig does not build anymore since commit
6cda724efb ("package/gcc: switch to gcc
6.x as the default"). Fix by upgrading to the latest U-Boot version,
xilinx-v2017.1, based on mainline v2017.01.
Fixes:
In file included from include/linux/compiler.h:54:0,
from include/linux/bitops.h:5,
from ./include/common.h:20:
include/linux/compiler-gcc.h:114:30: fatal error: linux/compiler-gcc6.h: No such file or directory
#include gcc_header(__GNUC__)
^
compilation terminated.
[Build- and run-tested]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: Alistair Francis <alistair.francis@xilinx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When calling 'make printvars' without -s, it ends with
"Nothing to be done for 'printvars'." That's because the rule only
contains $(info ...) calls and no actual shell commands to execute.
To avoid this, make sure there is a shell command by adding :.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite a few targets in the top-level Makefile were missing the .PHONY
marking. Now that the .PHONY declarations are next to the definition
of the targets, they are much easier to find.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, a lot of targets are declared PHONY together in the middle
of the Makefile. This has two important shortcomings:
- it is more difficult to see if a target is missing from PHONY;
- it is currently inside the ifeq ($(BR2_HAVE_DOT_CONFIG),y) condition,
but some of these targets are also defined when there is no .config;
in that case, these targets are not declared as PHONY.
Both issues can easily be solved by putting the PHONY declaration next
to the definition of the target.
The noconfig_targets are also all declared PHONY together; however,
for these we anyway have to keep the noconfig_targets variable
up-to-date, and that PHONY declaration is outside all conditions, so
there is no benefit of splitting them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This simplifies the variable a little
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
toolchain is a package, so it is already defined as .PHONY in the
inner-generic-package macro.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reusing the qemu x86-64 linux config isn't very obvious, so these defconfigs
aren't taken into consideration when the qemu defconfigs are updated,
breaking the build.
Instead use a custom linux config for the pc defconfigs. With this, we also
can get rid of the fragment file containing the delta fra the qemu config.
Created by linux-update-defconfig (after turning of the fragment file).
Also drop the linux kernel version number from the file name as it just
causes extra noise whenever the kernel is bumped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pc_x86_64 defconfigs reuse the linux configuration from qemu_x86_64, but
they weren't adjusted when this was updated to use linux-4.11 in 28d97609b2
(configs/qemu: bump to the latest kernel version), breaking the build.
Fix it by also moving them to linux-4.11.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
HTTPS works better behind certain corporate firewalls.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a small patch to gdb that fixes the build of gdbserver
on m68k/coldfire:
../nat/linux-ptrace.c: In function 'linux_fork_to_function':
../nat/linux-ptrace.c:282:19: warning: implicit declaration of function 'clone' [-Wimplicit-function-declaration]
child_pid = clone (function, child_stack + STACK_SIZE,
^
../nat/linux-ptrace.c:283:5: error: 'CLONE_VM' undeclared (first use in this function)
CLONE_VM | SIGCHLD, child_stack + STACK_SIZE * 2);
^
../nat/linux-ptrace.c:283:5: note: each undeclared identifier is reported only once for each function it appears in
Thanks to Waldemar for pointing out the patch fixing this issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
gdbserver's code looks at both UCLIBC_USE_MMU *and* UCLIBC_HAS_MMU to
decide whether to enable the no-MMU code. So far, on noMMU platforms,
UCLIBC_HAS_MMU was still set to 'y'. This commit adjusts this, which is
a step forward in getting gdbserver to build on m68k/coldfire.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
Building a toolchain for SuperH/musl works, but the toolchain generate
bogus binaries, because the path to the program interpreter is not
known (and therefore is /dev/null).
This commit backports a patch from gcc 6.x to make SuperH support with
musl work properly.
The patch is not needed in gcc >= 6.x because the musl support is
upstream. The patch is not needed for gcc 4.9 because we had a
different musl support patch that had support for all architectures in
one patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- New patch in the series
This commit small patches to gdb that fix redefined structures build
problems that occur when building on PowerPC, PowerPC64, PowerPC64le and
SuperH with the musl C library.
The PowerPC(64)(le) patch was taken from the Yocto Project, the SuperH
patch was inspired from the PowerPC patch. The issue has also been
reported upstream to the musl developers:
http://www.openwall.com/lists/musl/2017/06/03/1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Neither gdb nor gdbserver have support for ARM noMMU and OpenRISC, so
let's disable gdb on those architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- Fixed BR2_openrisc to BR2_or1k in Config.in.host
Changes since v1:
- Fixed BR2_openrisc to BR2_or1k
Before adding more architecture dependencies to gdb, let's introduce a
BR2_PACKAGE_GDB_ARCH_SUPPORTS, to avoid duplicating this list of
dependencies between the Config.in comment and the main Config.in
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
---
Changes since v2:
- None
Changes since v1:
- None
Like for freetype-config, override libpng-config path otherwise
the one from the host system may be used when installed.
Make sure that the one from STAGING_DIR is used.
configure:7480: checking for libpng-config
configure:7498: found /usr/bin/libpng-config
configure:7510: result: /usr/bin/libpng-config
configure:7529: checking whether libpng is present and sane
[...]
nios2-linux-gnu-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/libpng12'
Fixes
http://autobuild.buildroot.net/results/b68/b68f54404a7d412d639ebb6d052412eea6ee3bf1/lcdproc-0.5.7/config.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on !BR2_STATIC_LIBS was here because of tslib not
supporting static builds. But since
commit 05fadfea1 ("package/tslib: enable statically linked building")
it does and we can remove this dependecy.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If util-linux is not installed system-wide on the host, the build
fails with:
/usr/bin/gcc -Wp,-MT,isohybrid.o,-MMD,./.isohybrid.o.d -O2 -I/home/thomas/projets/buildroot/output/host/usr/include -W -Wall -Wstrict-prototypes -Os -fomit-frame-pointer -D_FILE_OFFSET_BITS=64 -I/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils -c -o isohybrid.o /home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c
/home/thomas/projets/buildroot/output/build/syslinux-6.03/utils/isohybrid.c:40:23: fatal error: uuid/uuid.h: No such file or directory
#include <uuid/uuid.h>
^
compilation terminated.
Therefore, this commit adds a dependency on host-util-linux, which
will ensure that libuuid is available. The resulting isohybrid tool is
really installed, and linked with libuuid:
$ readelf -d output/host/usr/bin/isohybrid
Dynamic section at offset 0x3e00 contains 26 entries:
Tag Type Name/Value
0x0000000000000001 (NEEDED) Shared library: [libuuid.so.1]
0x0000000000000001 (NEEDED) Shared library: [libc.so.6]
0x000000000000000f (RPATH) Library rpath: [/home/thomas/projets/buildroot/output/host/usr/lib]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying setup type to be 'distutils' results in this package being
installed as .egg, a zipped file, which inadvertantly makes
'simplegeneric' to be dependent on BR2_PACKAGE_PYTHON*_ZLIB. In order
to avoid that specify setup type to be 'setuptools' which makes use of
--single-version-externally-managed and therefore installs the package
as .pyc and a .egg-info folder.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For a while already, our git downloaded tarballs are reproducible, so
we can actually check the hash for them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we will enable hash checks for git downloads soon, the hash check
for the custom git download should be disabled.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of excluding the hash specifically for the custom tarball and
custom version cases, exclude it always except in the one case where
we do have a hash: the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case.
It is not needed to exclude it twice for barebox and barebox-aux,
because they use the same source tarball and barebox-aux can only be
enabled if barebox is enabled. So simplify even further by pulling
the exclusion logic out of inner-barebox-package.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of excluding the hash specifically for the custom tarball and
custom version cases, exclude it always except in the one case where
we do have a hash: the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although we currently don't have a .hash file for linux-headers, there
already are exclusions for the BR2_KERNEL_HEADERS_AS_KERNEL case (copied
from linux.mk). However, there is no exclusion for the
BR2_KERNEL_HEADERS_VERSION case.
For the BR2_KERNEL_HEADERS_AS_KERNEL case, the exclusion is actually
not needed. Indeed, KERNEL_HEADERS_SOURCE is computed to be the same
value as LINUX_SOURCE, and linux.mk already adds LINUX_SOURCE to
BR_NO_CHECK_HASH_FOR.
For the other cases, we should exclude the BR2_KERNEL_HEADERS_VERSION
case because there the user supplies the version so it can't be
included in the .hash file.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't have a hash for any linux version. We currently also don't
have a hash for the latest version, but if we ever add a hash, it
will only be for the latest version.
This simplifies the code a little because soon we will add hash checks
for git as well, so we also need an exclusion in that case. It's much
easier to always exclude except in the single case where we do have a
hash.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libv4l package builds fine even if locale is not enabled.
This have been tested with stm32f469_disco_defconfig
enabling build of libv4l package:
+#v4l utilities
+BR2_TOOLCHAIN_BUILDROOT_CXX=y
+BR2_PACKAGE_LIBV4L=y
+BR2_PACKAGE_LIBV4L_UTILS=y
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit removes the dependencies on MMU and dynamic libraries.
In order to build v4l2 utilities such as compliancy tools like
v4l2-compliance or cec-compliance, v4-utils can now be built without
dynamic libraries support.
In that case the v4l-utils parts which depends on dynamic library
support are not built:
- libv4l & libv4lconvert libraries
- libv4l plugins
- rds-ctl utility
- contrib test utilities
The rest of the utilities are built.
Signed-off-by: Hugues Fruchet <hugues.fruchet@st.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd's configure is looking in $PATH to find utilities that will be
needed at runtime.
Usually, those utilties, when installed on the host, will be found in
the same path they would be present on the target. For example,
/usr/bin/mount on the host would also be /usr/bin/mount on the target,
and all is find.
Except when we need to install a host variant of util-linux, which will
install mount in $(HOST_DIR), in which case systemd's configure would
find that one.
Of course, it is also very well possible that those utilities are not
installed on the host in the same location they would be on the target,
in case a user has manually installed some of those (e.g. in /usr/local/
or in /opt/)
Forcibly set the path to those utilities, as they are expected to be on
the target.
For kexec, we can set it even though we do not depend on it (yet).
systemd will appropriately test it at runtime.
For quota, we point to non-existing files, so as to catch errors at
runtime. It is to be noted that quotacheck is optional, while quotaon
does not seem to be (a service file is always installed, that uses it).
Note: utilties listed in the order they appear in configure.ac
Reported-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add setuptools runtime dependency, that is needed for
the chardetect script.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As can be seen in linux/arch/powerpc/include/uapi/asm/termbits.h are
defined as (note that those are octal numbers):
\#define TABDLY 00006000
\#define CSIZE 00001400
\#define CRDLY 00030000
which gives shifts of 10, 8 and 12. Adjust socat.mk accordingly to
reflect that difference.
Signed-off-by: Mark Hinds <zoronic@gmail.com>
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream rejected[1] the patch added in commit 6a1aa4e2da (swupdate: fix
build with older glibc). Instead of carrying this patch going forward, make
librt an extra library dependency in the Buildroot local swupdate .config.
This solution is somewhat less optimal than the patch, because it always adds
librt regardless of whether SURICATTA_HAWKBIT is enabled. In theory we could
add a test for (BR2_PACKAGE_JSON_C && BR2_PACKAGE_LIBCURL), which are the
SURICATTA_HAWKBIT dependencies, and edit .config at build time. But this adds
much complexity for little gain.
[1] https://groups.google.com/forum/?hl=en#!topic/swupdate/77QWIka27es
Cc: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
... otherwise it fails spectacularly as soon as PATH is referenced in a
package rule (i.e. very soon, fortunately):
>>> host-lzip 1.18 Downloading
/bin/bash: -c: line 0: unexpected EOF while looking for matching `"'
/bin/bash: -c: line 1: syntax error: unexpected end of file
Fixes # 9886.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ciro Santilli <ciro.santilli@gmail.com>
[Thomas: fix typo in message, use tabs for indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds an upstream patch to the sngrep package that fixes the
detection of wchar capable ncurses.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds basic support for orangepi-zero board.
Board support package includes the following components:
- mainline kernel v4.11
- mainline u-boot v2017.03
- extra kernel config options: spidev, spi nor flash, wifi
- dts patches to enable SPI NOR and spidev
More details about this board are available here:
- http://linux-sunxi.org/Orange_Pi_Zero
Note that at the moment networking is not supported right out of the box.
Ethernet submission to mainline kernel is a work in progress, see the
latest dwmac-sun8i branches at https://github.com/montjoie/linux
On-board SDIO WiFi chip XR819 is supported by off-the-tree wireless
driver available at https://github.com/fifteenhex/xradio
Changes from v1:
* Send patch using proper subject
* Update xr819 kernel dts patch: add compatible property
[Peter: fix s/PC/Zero/ typo]
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 4c10eedc1 (systemd: enable required kernel features), we added
setting a few required kernel features to ensure systemd works.
However, there was a typo for one of the variables: CONFIG_TMPFS_XATTR
was written as CONFIG_TMPFS_POSIX_XATTR, which does not exist (and never
ever existed, at least not since 2.6.12)...
Reported-by: Michael Heinemann <posted@heine.so>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Cc: Michael Heinemann <posted@heine.so>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the update from 0.0.X to 1.0.0 suggests, this is a major update. The driver
uses X11's touch API now, instead of motion with button emulation. Furthermore
it supports multitouch when a recent version of tslib is installed.
It is not backwards compatible for very old versions of the X server. See
https://github.com/merge/xf86-input-tslib/releases for some details.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa patches no longer required, the make target name changed
to Image. The Qemu binary for OpenRisc was renamed upstream.
I removed the x86->x86_64 symlink, independent files preferred.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.11.3 2.9.0 YES OK
arm_versatile 4.11.3 2.9.0 YES OK
arm_versatile_nommu 4.4.70 2.9.0 YES OK
arm_vexpress 4.11.3 2.9.0 YES OK
m68k_mcf5208 4.11.3 2.9.0 YES OK
m68k_q800 4.11.3 q800-v2.4.0 NO (2) OK
microblazebe 4.11.3 2.9.0 YES OK
microblazeel 4.11.3 2.9.0 YES OK
mips32r2el_malta 4.11.3 2.9.0 YES OK
mips32r2_malta 4.11.3 2.9.0 YES OK
mips32r6el_malta 4.11.3 2.9.0 YES OK
mips32r6_malta 4.11.3 2.9.0 YES OK
mips64el_malta 4.11.3 2.9.0 YES OK
mips64_malta 4.11.3 2.9.0 YES OK
mips64r6el_malta 4.11.3 2.9.0 YES OK
mips64r6_malta 4.11.3 2.9.0 YES OK
nios2-10m50 4.11.3 2.9.0 NO OK
or1k 4.11.3 2.9.0 NO OK (5)
ppc_g3beige 4.11.3 2.9.0 YES OK
ppc_mpc8544ds 4.11.3 2.9.0 YES OK
ppc_virtex_ml507 4.9.6 2.9.0 NO OK (3)
ppc64_pseries 4.11.3 2.9.0 YES OK
sh4 4.9.6 2.9.0 YES OK (4)
sh4eb 4.9.6 2.9.0 NO (1) OK (4)
sparc_ss10 4.11.3 2.9.0 YES OK
sparc64_sun4u 4.11.3 2.9.0 YES OK
sparc_sun4u 4.11.3 2.9.0 YES OK
x86 4.11.3 2.9.0 YES OK
x86_64 4.11.3 2.9.0 YES OK
xtensa_lx60 4.11.3 2.9.0 YES OK
xtensa_lx60_nommu 4.11.3 2.9.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel oops with 4.11.3 on boot
(4) - System is extremely slow with 4.11.3, needs further investigation
(5) - Qemu binary got renamed to qemu-system-or1k
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since tslib now supports static builds the dependency on !BR2_STATIC_LIBS
can be removed from xf86-input-tslib too.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tslib can be configured to be built statically linked. So let's add this option.
tslib is quite configurable and each module can be selected to be built into
the static build. This configuration includes the hardware independent filter
modules (obviously), and the Linux evdev input module.
This results in a configuration that fully supports multitouch in any
combination.
Signed-off-by: Martin Kepplinger <martin.kepplinger@ginzinger.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building with old gcc versions (such as gcc 4.3), the current
version of kmod fails with:
shared/util.c:52: error: expected identifier or '(' before 'do'
shared/util.c:52: error: expected identifier or '(' before 'while'
This is due to a use of the internal assert_cc() macro outside of a
function, while this macro is defined for old gcc versions in a way that
cannot be used outside functions.
This wasn't noticed by the autobuilders because we don't have such old
target compilers. On the host side, we have some autobuilder instances
with such old gcc versions, but host-kmod is only used by the linux
package, which is never tested by the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SELinux requires a config file in /etc/selinux which controls the state
of SELinux on the system.
This config file has two options set in it:
SELINUX which set's the state of selinux on boot.
SELINUXTYPE which should equal the name of the policy. In this case, the
default name is targeted.
This patch adds:
- A choice menu on Config.in that allows the user to select a default
SELinux state.
- A basic config file that will be installed to
target/etc/selinux and will set SELINUX= to the selected state.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_STATE
- qstrip the variable
- drop unused REFPOLICY_NAME variable.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Refpolicy by default will build the highest version supported. This may
cause older kernels to not load the policy.
This patch adds a custom policy version string which is defaulted to 30,
which is the highest supported as of today.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- rename option to BR2_PACKAGE_REFPOLICY_POLICY_VERSION
- use qstrip to remove double quotes]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch is for adding selinux reference policy (refpolicy).
It is a complete SELinux policy that can be used as the system policy
for a variety of systems and used as the basis for creating other policies.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Acked-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- add entry to DEVELOPERS file
- remove redundant dependencies
- drop unused REFPOLICY_PYINC option
- use SPDX tag for license
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The daemon service script associated with imx-uuc failed to stop the daemon
since the PID of the process wasn't stored at start time.
Adding -m option allowed to create the uuc.pid file as expected.
Signed-off-by: Alexandre Esse <alexandre.esse.dev@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cmake depends on rhash, but host-cmake doesn't. This is because we use
the bundled dependencies for host-cmake but not for target.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are new dependencies: erlang-p1-jiffy, erlang-p1-oauth2,
erlang-p1-stun, erlang-p1-tls, erlang-p1-utils, erlang-p1-xmpp
as well as two host dependencies on erlang-p1-utils and
erlang-p1-xmpp. Otherwise the compilation via rebar fails.
4 patches have been refreshed and a new patch have been introduced to
tell rebar to use host dependencies instead of trying to download them.
Hopefully this patch could be drop in ejabberd 17.06. Missing SoB in
patches have been added as well.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
sdksyms.c:311:15: error: expected expression before »,« token
(void *) &, /* ../../include/os.h:96 */
by backporting an upstream patch, sdksyms.c is generated by
hw/xfree86/sdksyms.sh which is broken when used with gcc5+.
Problem was found while testing
http://patchwork.ozlabs.org/patch/762102/
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_TSLIB=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Botan compiles all PowerPC code with AltiVec support and only determines
at runtime whether the CPU even supports it. If the target CPU uses the
older SPE extensions, though, this is too late; since SPE and AltiVec
are incompatible, gcc aborts the compilation. This patch explicitly
disables AltiVec support unless BR2_POWERPC_CPU_HAS_ALTIVEC is defined
Signed-off-by: Tobias Blass <tobias.blass@rohde-schwarz.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need BR2_ARM_CPU_HAS_ARM, otherwise build for cortex-m4 breaks with
"target CPU does not support ARM mode".
We only enable arm/aarch64 support for now, mips support is broken:
test-pkg/br-mips64-n64-full/build/gnu-efi-3.0.5/lib/mips64el/setjmp.S:40:
Error: opcode not supported on this processor: mips64 (mips64) `ext $v0,$v0,29,1'
Tested by test-pkg using this defconfig
BR2_PACKAGE_GNU_EFI=y
with the following results:
armv5-ctng-linux-gnueabi [ 1/49]: OK
armv7-ctng-linux-gnueabihf [ 2/49]: OK
br-aarch64-glibc [ 3/49]: OK
br-arcle-hs38 [ 4/49]: SKIPPED
br-arm-basic [ 5/49]: OK
br-arm-cortex-a9-glibc [ 6/49]: OK
br-arm-cortex-a9-musl [ 7/49]: OK
br-arm-cortex-m4-full [ 8/49]: SKIPPED
br-arm-full [ 9/49]: OK
br-arm-full-nothread [10/49]: OK
br-arm-full-static [11/49]: OK
br-bfin-full [12/49]: SKIPPED
br-i386-pentium4-full [13/49]: OK
br-i386-pentium-mmx-musl [14/49]: OK
br-m68k-5208-full [15/49]: SKIPPED
br-m68k-68040-full [16/49]: SKIPPED
br-microblazeel-full [17/49]: SKIPPED
br-mips32r6-el-hf-glibc [18/49]: SKIPPED
br-mips64-n64-full [19/49]: SKIPPED
br-mips64r6-el-hf-glibc [20/49]: SKIPPED
br-mipsel-o32-full [21/49]: SKIPPED
br-nios2-glibc [22/49]: SKIPPED
br-openrisc-uclibc [23/49]: SKIPPED
br-powerpc-603e-basic-cpp [24/49]: SKIPPED
br-powerpc64le-power8-glibc [25/49]: SKIPPED
br-powerpc64-power7-glibc [26/49]: SKIPPED
br-powerpc-e500mc-full [27/49]: SKIPPED
br-sh4-full [28/49]: SKIPPED
br-sparc64-glibc [29/49]: SKIPPED
br-sparc-uclibc [30/49]: SKIPPED
br-x86-64-core2-full [31/49]: OK
br-x86-64-musl [32/49]: OK
br-xtensa-full [33/49]: SKIPPED
i686-ctng-linux-gnu [34/49]: OK
linaro-aarch64 [35/49]: OK
linaro-arm [36/49]: OK
mips64el-ctng_n32-linux-gnu [37/49]: SKIPPED
mips64el-ctng_n64-linux-gnu [38/49]: SKIPPED
powerpc-ctng_e500v2-linux-gnuspe [39/49]: SKIPPED
sourcery-arm-armv4t [40/49]: OK
sourcery-arm [41/49]: OK
sourcery-arm-thumb2 [42/49]: OK
sourcery-mips64 [43/49]: SKIPPED
sourcery-mips [44/49]: SKIPPED
sourcery-nios2 [45/49]: SKIPPED
sourcery-sh [46/49]: SKIPPED
sourcery-x86-64 [47/49]: OK
sourcery-x86 [48/49]: OK
x86_64-ctng_locales-linux-gnu [49/49]: OK
49 builds, 27 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to the release notes "Compiler support for C++11 is now
required for building the ICU libraries.
GCC: version 4.8 and later has been tested."
Added corresponding dependencies and reverse dependencies.
Removed patch 0006 applied upstream.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-gcc-initial with GCC7 on the host fails due to the
comparison of a pointer to an integer in ubsan_use_new_style_p, which
is forbidden by ISO C++:
ubsan.c:1474:23: error: ISO C++ forbids comparison between pointer and
integer [-fpermissive]
|| xloc.file == '\0' || xloc.file[0] == '\xff'
Backported from:
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=239971
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream release is broken w.r.t autoreconf, patch 0002 fixes it.
Needed to prepare for upcoming patch to fix linking against newer
flex versions.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tmux uses 256 color version of 'screen' terminfo by default, so copy
corresponding file to support that usecase.
Signed-off-by: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libiconv doesn't build with gcc 6 due to a macro in stdio.h using gets()
which has been removed with the C11 standard.
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
With libiconv 1.15, this macro is protected by
#if HAVE_RAW_DECL_GETS && !defined __cplusplus
_GL_WARN_ON_USE (gets, "gets is a security hole - use fgets instead");
#endif
Fixes:
http://autobuild.buildroot.net/results/61b/61bbfc839f99feb043d3456f107429d6e5319258
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
0001-fix-CVE-2017-1000367.patch already included in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even when locales are enabled, gettext is not mandatory to build
grep, i.e the following defconfig builds fine:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.02-1096-g54a5333.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_GETTEXT=y
BR2_PACKAGE_GREP=y
However, if gettext provides libintl, it gets used. Therefore this
commit moves gettext from a mandatory dependency to an optional
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fetchmail itself does not need zlib, there is no reference to it in its
source, so the "select BR2_PACKAGE_ZLIB" is not necessary. Moreover,
"zlib" was not added to FETCHMAIL_DEPENDENCIES (but was anyway in the
dependency chain through openssl).
In addition, LIBS="-lz" is only needed in static linking configurations,
to help fetchmail's configure script find OpenSSL (it doesn't use
pkg-config unfortunately).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even when locales are enabled, gettext is not mandatory to build
fetchmail, i.e the following defconfig builds fine:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2017.02-1096-g54a5333.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_10=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_FETCHMAIL=y
However, if gettext provides libintl, it gets used. Therefore this
commit moves gettext from a mandatory dependency to an optional
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This uses a genimage feature to rename the uImage file instead
of manually creating a symlink in the post-image script.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps mono the version 4.8.1.0. Simultaneously it removes an
upstreamed patch and updates another one to the latest source code.
It also disables the compilation of 'aot' cause the build system was
fixed to support this option again.
It also disables the compilation of the optional BoringTLS stack: this
stack is distributed as an external component inside the mono source
tree and it carries it's own build system (cmake). To be compiled inside
buildroot it requires hacking the mono build system to pass the correct
compiling options to cmake. This will be done in a future patch set.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable autoreconf because of missing install-sh.
Add upstream patch fixing build breakage with libtalloc is missing.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the two patches from gcc upstream master we can enable gcc 6.x for
microblaze again.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping Go to 1.8.3 from 1.7.
Go 1.8 comes with significant performance improvements, particularly
around ARM: "CPU time required by our benchmark programs was reduced by
20-30% on 32-bit ARM systems."
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hwloc package consists of a library and utilities so it should be
installed to both the staging and target directories.
Signed-off-by: Graham Holland <gmh7@sfu.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changed _SITE to github, current version is not available from upstream
website.
Removed patches applied upstream:
0002-Fixed-bugs-due-to-uninitialized-data-in-the-JP2-deco.patch
e96fc4fdd5
0003-Added-a-check-in-the-JP2-encoder-to-ensure-that-the-.patch
58ba0365d9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even if gcc 5 is still maintained for some time (gcc 5.5 is pending),
switch to gcc 6.x since it has been released since 2016-04-27 and
gcc 7.x is available since 2017-05-02.
We have been having toolchains in the autobuilders with gcc
6.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Extended _EXTRACT_CMDS and _INSTALL_TARGET_CMDS to handle updated
internal zip structure:
$ unzip -l ../dl/bootstrap-3.3.1-dist.zip
Archive: ../dl/bootstrap-3.3.1-dist.zip
Length Date Time Name
--------- ---------- ----- ----
0 2014-11-12 18:03 dist/
0 2014-11-12 18:03 dist/css/
[...]
$ unzip -l ../dl/bootstrap-3.3.7-dist.zip
Archive: ../dl/bootstrap-3.3.7-dist.zip
Length Date Time Name
--------- ---------- ----- ----
0 2016-07-25 15:53 bootstrap-3.3.7-dist/css/
[...]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Thomas: better fix for the EXTRACT_CMDS, which consists in removing the
dist/ sub-directory.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building checkpolicy/test, the linker reports the following error:
cc dispol.o -lfl /usr/src/selinux/DESTDIR/usr/lib/libsepol.a -L/usr/src/selinux/DESTDIR/usr/lib -o dispol
/usr/lib/gcc/x86_64-pc-linux-gnu/6.2.1/../../../../lib/libfl.so: undefined reference to `yylex'
collect2: error: ld returned 1 exit status
According to flex documentation
(https://github.com/westes/flex/blob/master/doc/flex.texi), -lfl is used
to provide an implementation for yywrap(). However every flex file now
uses "%option noyywrap", which makes -lfl no longer mandatory. Remove
this option from checkpolicy Makefiles.
Patch taken from https://patchwork.kernel.org/patch/9450549/
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do want to build the flex binary when building host-flex since it's
needed as a build dependency for other packages.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 4.5.0 the iptables_common.h header is unused. Don't bother
patching this file.
Renumber the following patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop upstream patch.
Add a patch fixing struct ethhdr conflict using the Buildroot local if_ether.h
kernel header suppression patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fio package was disabled on uClibc because posix_madvise() was
back then not implemented in an official release of uClibc. It now
exists in uClibc-ng since its version 1.0.0, so we can assume it's
available. We already make lots of assumptions about external uClibc
toolchains, and they should definitely be using a recent version of
uClibc-ng to be usable by Buildroot.
Also, the Config.in comment was not handling this uClibc exception.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we have version 7.0, released July 2015. Latest upstream
release 7.1, which dates back to November 2015, causes build errors.
Therefore we bump to git HEAD, updated May 2017, which builds fine.
The package requires gcc-4.9 or later now:
2940c64283
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch 0001 already included in this release:
438274f938
Patch 0002 already included in this release:
43bc256d8a
Patch 0003 already included in this release:
1044b43637
Patch 0004 already included in this release:
9a72a69e03
Patch 0005 already included in this release:
5c080298d5
Patch 0006 already included in this release:
48780b4fcc
Patch 0007 already included in this release:
d60332057b
Patch 0008 already included in this release:
2ea32f7372
Patch 0009 already included in this release:
8283e4d1b7
Patch 0010 already included in this release:
47f2fb61a3
Patch 0011 already included in this release:
3cfd62d77c
Patch 0012 already included in this release:
0a76a8c765
Patch 0013 already included in this release:
66e7bd5952
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Removed self-computed sha1 hash, we already provide a sha256 hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-CVE-2017-5985-Ensure-target-netns-is-caller-owned.patch as
it has been integrated upstream
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also fixes compile error with gcc7:
dvbdevice.c: In member function 'bool cDvbTuner::SetFrontend()':
dvbdevice.c:848:31: error: call of overloaded 'abs(unsigned int&)' is ambiguous
frequency = abs(frequency); // Allow for C-band, where the frequency is less than the LOF
^
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to Linux kernel version 4.4.41 from the TI SDK 03.03.00.04
(TI SDK release date: 29.03.2017)
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0001-Add-disable-tests-to-configure.patch as it has been
integrated upstream
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is finally possible to boot LEGO MINDSTORMS EV3 from the mainline
Linux kernel. This patch updates the defconfg to use the mainline kernel
instead of the custom ev3dev kernel.
[Peter: lock kernel headers version]
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add Python SQLite3 dependency that first appeared in 1.5.2.
[Peter: clarify that this is a runtime dependency]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also removes 0001-compat-don-t-re-define-program_invocation_short_name.patch,
since it's applied to upstream in this version.
Tested with:
qemu_ppc_g3beige_defconfig
Signed-off-by: Mario J. Rugiero <mrugiero@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumps contain mostly translation updates:
package/kodi-pvr-argustv: bump version to 2.5.6
package/kodi-pvr-dvblink: bump version to 3.4.5
package/kodi-pvr-dvbviewer: bump version to 2.4.11
package/kodi-pvr-filmon: bump version to 1.4.9
package/kodi-pvr-hdhomerun: bump version to 2.4.7
package/kodi-pvr-hts: bump version to 3.4.24
package/kodi-pvr-iptvsimple: bump version to 2.4.11
package/kodi-pvr-mediaportal-tvserver: bump version to 2.4.19
package/kodi-pvr-nextpvr: bump version to 2.4.13
package/kodi-pvr-njoy: bump version to 2.4.3
package/kodi-pvr-pctv: bump version to 1.4.7
package/kodi-pvr-stalker: bump version to 2.8.6
package/kodi-pvr-vbox: bump version to 3.6.10
package/kodi-pvr-vdr-vnsi: bump version to 2.6.21
package/kodi-pvr-vuplus: bump version to 2.4.10
package/kodi-pvr-wmc: bump version to 1.4.9
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove upstream patch, so we don't need to autoreconf
Rename patch 0002 -> 0001
Add POWERTOP_SOURCE to adjust to the new archive naming.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter d in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter c in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping
on all of these Config files. This patch cleans up all warnings
related to the text wrapping for the Config files starting with
the letter b in the package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The check-package script when ran gives warnings on text wrapping on all
of these Config files. This patch cleans up all warnings related to the
text wrapping for the Config files starting with the letter a in the
package directory.
The appropriate indentation is: <tab><2 spaces><62 chars>
See http://nightly.buildroot.org/#writing-rules-config-in for more
information.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0001 patch removed. It doesn't apply on this version and is also not
necessary since the AR binary is now handled correctly with AR = @AR@.
- 0002 patch removed. It's already included in this release:
a5cbe929ac
- The flex project has moved to GitHub, so modify the URLs in both
flex.mk and Config.in files.
- The sed command over Makefile.in to prevent the flex binary to be
built fails, so remove it. That logic has been moved to
src/Makefile.in, and whenever we disable the flex binary to be built
then the compilation fails when building the documentation because
some bits require "../src/flex", which is the flex binary.
We prevent building the flex binary and the documentation using a new
patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added --disable-concheck to avoid configure failure when libcurl is not
available:
checking for LIBCURL... no
configure: error: --enable-concheck requires libcurl library.
One would expect the concheck functionality to be automatically disabled
if libcurl is not found. But upstream wants to be explicitly disabled if
not wanted to prevent building NetworkManager without connectivity
check support without any evident warning on systems where libcurl is
not installed. See:
faa1b85dab
Proper support for concheck will be added in a subsequent patch.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New release adds a couple new features and improvements, although the
most important one - the test suite - doesn't really matter for
buildroot.
The project has also been relicensed under LGPLv2.1.
We need the m4 directory fixup now since the AC_CONFIG_MACRO_DIRS([m4])
macro was used in configure.ac, but we don't want to have unnecessary
files in the git repo.
New features:
- relicensed under LGPLv2.1
- implemented a unit testing framework together with a comprehensive
set of test cases
- added a non-closing variant of the gpiochip iterator and foreach
macro [by Clemens Gruber]
- added gpiod_chip_open_by_label()
Improvements:
- Makefiles & build commands have been reworked [by Thierry Reding]
- documentation updates
- code shrinkage here and there
- coding style fixes
- removed all designated initializers from the header for better standards
compliance
Bug fixes:
- fix the return value of gpiod_simple_event_loop()
- don't try to process docs if doxygen is not installed
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package can now be used for uClibc toolchains.
Tested using this defconfig:
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_BLUEZ5_UTILS=y
BR2_PACKAGE_BLUEZ5_UTILS_CLIENT=y
BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED=y
BR2_PACKAGE_BLUEZ5_UTILS_EXPERIMENTAL=y
BR2_PACKAGE_BLUEZ5_PLUGINS_HEALTH=y
BR2_PACKAGE_BLUEZ5_PLUGINS_MIDI=y
BR2_PACKAGE_BLUEZ5_PLUGINS_NFC=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SAP=y
BR2_PACKAGE_BLUEZ5_PLUGINS_SIXAXIS=y
BR2_PACKAGE_BLUEZ5_UTILS_TEST=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-6 correctly warns about a out of bounds access
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
check the end of array instead of beginning of next element to fix this
/* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
ethernet1 = &xr819;
+ spi1 = &spi1;
};
chosen {
@@ -177,3 +178,13 @@
};
};
};
+
+&spi1 {
+ status = "okay";
+
+ spidev@0 {
+ compatible = "rohm,dh2228fv";
+ reg = <0>;
+ spi-max-frequency = <10000000>;
+ };
+};
--
2.11.0
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
