Update for 2020.02.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.gitlab-ci.yml

@@ -4,7 +4,7 @@
 # It needs to be regenerated every time a defconfig is added, using
 # "make .gitlab-ci.yml".
 
-image: buildroot/base:20180318.1724
+image: buildroot/base:20191027.2027
 
 .check_base:
     except:
@@ -160,6 +160,8 @@ bananapro_defconfig: { extends: .defconfig }
 beagleboardx15_defconfig: { extends: .defconfig }
 beaglebone_defconfig: { extends: .defconfig }
 beaglebone_qt5_defconfig: { extends: .defconfig }
+beagleboneai_defconfig: { extends: .defconfig }
+beelink_gs1_defconfig: { extends: .defconfig }
 chromebook_snow_defconfig: { extends: .defconfig }
 ci20_defconfig: { extends: .defconfig }
 csky_gx6605s_defconfig: { extends: .defconfig }
@@ -184,6 +186,7 @@ freescale_t1040d4rdb_defconfig: { extends: .defconfig }
 freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_a64_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig }
+friendlyarm_nanopi_neo_plus2_defconfig: { extends: .defconfig }
 galileo_defconfig: { extends: .defconfig }
 grinn_chiliboard_defconfig: { extends: .defconfig }
 grinn_liteboard_defconfig: { extends: .defconfig }
@@ -200,6 +203,7 @@ imx7d-sdb_defconfig: { extends: .defconfig }
 imx7dpico_defconfig: { extends: .defconfig }
 imx8mmpico_defconfig: { extends: .defconfig }
 imx8mpico_defconfig: { extends: .defconfig }
+lafrite_defconfig: { extends: .defconfig }
 lego_ev3_defconfig: { extends: .defconfig }
 licheepi_zero_defconfig: { extends: .defconfig }
 linksprite_pcduino_defconfig: { extends: .defconfig }
@@ -251,6 +255,7 @@ qemu_aarch64_virt_defconfig: { extends: .defconfig }
 qemu_arm_versatile_defconfig: { extends: .defconfig }
 qemu_arm_versatile_nommu_defconfig: { extends: .defconfig }
 qemu_arm_vexpress_defconfig: { extends: .defconfig }
+qemu_arm_vexpress_tz_defconfig: { extends: .defconfig }
 qemu_csky610_virt_defconfig: { extends: .defconfig }
 qemu_csky807_virt_defconfig: { extends: .defconfig }
 qemu_csky810_virt_defconfig: { extends: .defconfig }
@@ -292,6 +297,7 @@ raspberrypi2_defconfig: { extends: .defconfig }
 raspberrypi3_64_defconfig: { extends: .defconfig }
 raspberrypi3_defconfig: { extends: .defconfig }
 raspberrypi3_qt5we_defconfig: { extends: .defconfig }
+raspberrypi4_64_defconfig: { extends: .defconfig }
 raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
@@ -312,6 +318,7 @@ solidrun_macchiatobin_mainline_defconfig: { extends: .defconfig }
 solidrun_macchiatobin_marvell_defconfig: { extends: .defconfig }
 stm32f429_disco_defconfig: { extends: .defconfig }
 stm32f469_disco_defconfig: { extends: .defconfig }
+stm32mp157c_dk2_defconfig: { extends: .defconfig }
 toradex_apalis_imx6_defconfig: { extends: .defconfig }
 ts4900_defconfig: { extends: .defconfig }
 ts5500_defconfig: { extends: .defconfig }
@@ -334,6 +341,7 @@ tests.core.test_hardening.TestRelroPartial: { extends: .runtime_test }
 tests.core.test_hardening.TestSspNone: { extends: .runtime_test }
 tests.core.test_hardening.TestSspStrong: { extends: .runtime_test }
 tests.core.test_post_scripts.TestPostScripts: { extends: .runtime_test }
+tests.core.test_root_password.TestRootPassword: { extends: .runtime_test }
 tests.core.test_rootfs_overlay.TestRootfsOverlay: { extends: .runtime_test }
 tests.core.test_timezone.TestGlibcAllTimezone: { extends: .runtime_test }
 tests.core.test_timezone.TestGlibcNonDefaultLimitedTimezone: { extends: .runtime_test }
@@ -367,20 +375,30 @@ tests.init.test_systemd.TestInitSystemSystemdRwFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRwIfupdown: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRwNetworkd: { extends: .runtime_test }
 tests.package.test_atop.TestAtop: { extends: .runtime_test }
+tests.package.test_crudini.TestCrudiniPy2: { extends: .runtime_test }
+tests.package.test_crudini.TestCrudiniPy3: { extends: .runtime_test }
 tests.package.test_docker_compose.TestDockerCompose: { extends: .runtime_test }
 tests.package.test_dropbear.TestDropbear: { extends: .runtime_test }
 tests.package.test_glxinfo.TestGlxinfo: { extends: .runtime_test }
 tests.package.test_ipython.TestIPythonPy3: { extends: .runtime_test }
+tests.package.test_libftdi1.TestPythonPy2Libftdi1: { extends: .runtime_test }
+tests.package.test_libftdi1.TestPythonPy3Libftdi1: { extends: .runtime_test }
 tests.package.test_lpeg.TestLuaLPeg: { extends: .runtime_test }
 tests.package.test_lpeg.TestLuajitLPeg: { extends: .runtime_test }
 tests.package.test_lsqlite3.TestLuaLsqlite3: { extends: .runtime_test }
 tests.package.test_lsqlite3.TestLuajitLsqlite3: { extends: .runtime_test }
 tests.package.test_lua.TestLua: { extends: .runtime_test }
 tests.package.test_lua.TestLuajit: { extends: .runtime_test }
+tests.package.test_lua_cqueues.TestLuaLuaCqueues: { extends: .runtime_test }
+tests.package.test_lua_cqueues.TestLuajitLuaCqueues: { extends: .runtime_test }
 tests.package.test_lua_curl.TestLuaLuacURL: { extends: .runtime_test }
 tests.package.test_lua_curl.TestLuajitLuacURL: { extends: .runtime_test }
+tests.package.test_lua_gd.TestLuaLuaGD: { extends: .runtime_test }
+tests.package.test_lua_gd.TestLuajitLuaGD: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuaHttp: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuajitHttp: { extends: .runtime_test }
+tests.package.test_lua_sdl2.TestLuaLuaSDL2: { extends: .runtime_test }
+tests.package.test_lua_sdl2.TestLuajitLuaSDL2: { extends: .runtime_test }
 tests.package.test_lua_utf8.TestLuaUtf8: { extends: .runtime_test }
 tests.package.test_lua_utf8.TestLuajitUtf8: { extends: .runtime_test }
 tests.package.test_luaexpat.TestLuaLuaExpat: { extends: .runtime_test }
@@ -397,7 +415,11 @@ tests.package.test_luasocket.TestLuaLuaSocket: { extends: .runtime_test }
 tests.package.test_luasocket.TestLuajitLuaSocket: { extends: .runtime_test }
 tests.package.test_luasyslog.TestLuaLuasyslog: { extends: .runtime_test }
 tests.package.test_luasyslog.TestLuajitLuasyslog: { extends: .runtime_test }
+tests.package.test_luvi.TestLuvi: { extends: .runtime_test }
+tests.package.test_lxc.TestLxc: { extends: .runtime_test }
+tests.package.test_lzlib.TestLuaLzlib: { extends: .runtime_test }
 tests.package.test_openjdk.TestOpenJdk: { extends: .runtime_test }
+tests.package.test_opkg.TestOpkg: { extends: .runtime_test }
 tests.package.test_perl.TestPerl: { extends: .runtime_test }
 tests.package.test_perl_class_load.TestPerlClassLoad: { extends: .runtime_test }
 tests.package.test_perl_dbd_mysql.TestPerlDBDmysql: { extends: .runtime_test }
@@ -421,8 +443,11 @@ tests.package.test_python_autobahn.TestPythonPy2Autobahn: { extends: .runtime_te
 tests.package.test_python_autobahn.TestPythonPy3Autobahn: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy2Automat: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy3Automat: { extends: .runtime_test }
+tests.package.test_python_avro.TestPythonAvro: { extends: .runtime_test }
 tests.package.test_python_bitstring.TestPythonPy2Bitstring: { extends: .runtime_test }
 tests.package.test_python_bitstring.TestPythonPy3Bitstring: { extends: .runtime_test }
+tests.package.test_python_can.TestPythonPy2Can: { extends: .runtime_test }
+tests.package.test_python_can.TestPythonPy3Can: { extends: .runtime_test }
 tests.package.test_python_cbor.TestPythonPy2Cbor: { extends: .runtime_test }
 tests.package.test_python_cbor.TestPythonPy3Cbor: { extends: .runtime_test }
 tests.package.test_python_click.TestPythonPy2Click: { extends: .runtime_test }
@@ -432,6 +457,10 @@ tests.package.test_python_constantly.TestPythonPy3Constantly: { extends: .runtim
 tests.package.test_python_crossbar.TestPythonPy3Crossbar: { extends: .runtime_test }
 tests.package.test_python_cryptography.TestPythonPy2Cryptography: { extends: .runtime_test }
 tests.package.test_python_cryptography.TestPythonPy3Cryptography: { extends: .runtime_test }
+tests.package.test_python_django.TestPythonPy3Django: { extends: .runtime_test }
+tests.package.test_python_gitdb2.TestPythonPy2Gitdb2: { extends: .runtime_test }
+tests.package.test_python_gitdb2.TestPythonPy3Gitdb2: { extends: .runtime_test }
+tests.package.test_python_gobject.TestPythonPy2Gobject: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy2Incremental: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy3Incremental: { extends: .runtime_test }
 tests.package.test_python_passlib.TestPythonPy2Passlib: { extends: .runtime_test }
@@ -444,6 +473,8 @@ tests.package.test_python_pyyaml.TestPythonPy2Pyyaml: { extends: .runtime_test }
 tests.package.test_python_pyyaml.TestPythonPy3Pyyaml: { extends: .runtime_test }
 tests.package.test_python_service_identity.TestPythonPy2ServiceIdentity: { extends: .runtime_test }
 tests.package.test_python_service_identity.TestPythonPy3ServiceIdentity: { extends: .runtime_test }
+tests.package.test_python_smmap2.TestPythonPy2Smmap2: { extends: .runtime_test }
+tests.package.test_python_smmap2.TestPythonPy3Smmap2: { extends: .runtime_test }
 tests.package.test_python_subprocess32.TestPythonPy2Subprocess32: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy2Treq: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy3Treq: { extends: .runtime_test }
@@ -460,6 +491,8 @@ tests.package.test_rings.TestLuajitRings: { extends: .runtime_test }
 tests.package.test_rust.TestRust: { extends: .runtime_test }
 tests.package.test_rust.TestRustBin: { extends: .runtime_test }
 tests.package.test_syslog_ng.TestSyslogNg: { extends: .runtime_test }
+tests.package.test_tmux.TestTmux: { extends: .runtime_test }
+tests.package.test_turbolua.TestLuajitTurbolua: { extends: .runtime_test }
 tests.toolchain.test_external.TestExternalToolchainBuildrootMusl: { extends: .runtime_test }
 tests.toolchain.test_external.TestExternalToolchainBuildrootuClibc: { extends: .runtime_test }
 tests.toolchain.test_external.TestExternalToolchainCCache: { extends: .runtime_test }

.gitlab-ci.yml.in

@@ -4,7 +4,7 @@
 # It needs to be regenerated every time a defconfig is added, using
 # "make .gitlab-ci.yml".
 
-image: buildroot/base:20180318.1724
+image: buildroot/base:20191027.2027
 
 .check_base:
     except:

CHANGES

@@ -1,3 +1,514 @@
+2020.02.1, released April 10th, 2020
+
+	Important / security related fixes.
+
+	core: Also fixup /lib references in libtool .la files, similar
+	to how it is done for /usr/*.
+
+	Various fixes for builds with per-package target/host
+	directories.
+
+	toolchain: Fix kernel headers validation check for external
+	toolchains. Fix make 4.3+ compatibility in external toolchain
+	logic.
+
+	fs/initramfs: fix show-info so it also shows the usual
+	rootfs-related variables.
+
+	Updated/fixed packages: arm-trusted-firmware, barebox-aux,
+	bluez5_utils, bubblewrap, busybox, civetweb, cog, collectd,
+	ffmpeg, gcc, gnutls, gssdp, gvfs, haproxy, hiredis, hostapd,
+	kmscube, kodi-screensaver-rsxs, libical, libinput, libexif,
+	libopenssl, libsndfile, linux, linux-tools, llvm, localedef,
+	mcrypt, mesa3d, meson, monit, nftables, ntp, opencv3,
+	oprofile, php, pinentry, polkit, pure-ftpd, python-pyyaml,
+	qt5, quagga, radvd, rcw, redis, rocksdb, samba4, screen,
+	sdbusplus, swupdate, sysdig, sysklogd, syslinux, syslog-ng,
+	tor, tslib, uacme, util-linux, vala, vlc,
+	wireguard-linux-compat, wireguard-tools, wireshark,
+	wpa_supplicant, xserver_xorg-server
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12711: host-localedef 2.30-20 fails to compile on fedora 32
+	#12746: "sysdig" package description points to http://sysdig.org, ..
+
+2020.02, released March 8th, 2020
+
+	Various fixes.
+
+	br2-external: Fix compatibility with make 4.3+
+
+	Updated/fixed packages: bash, bcm2835, binutils, cups,
+	erlang-p1-acme, fbgrab, gr-osmosdr, gst1-plugins-base,
+	gst1-validate, gstreamer1, guile, jhead, libdrm, libevdev,
+	libinput, libnss, libsndfile, libvncserver, linux-firmware,
+	mesa3d, nodejs, openjdk-bin, openvmtools, optee-test, patch,
+	php, piglit, pppd, python-django, qemu, qt5base, ruby,
+	ser2net, swupdate, thrift, zziplib
+
+	Removed packages: classpath, jamvm
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12606: fbgrab location has changed
+
+2020.02-rc3, released March 2nd, 2020
+
+	Fixes all over the tree.
+
+	Infrastructure: Rework file list handling to fix race
+	conditions when building with per-package target and host
+	directories and top-level parallel builds.
+
+	Updated/fixed packages: aufs, binutils, blktrace, brltty,
+	cairo, dnsmasq, docker-compose, elf2flt, exim, exiv2, git,
+	kodi-inputstream-adaptive, libarchive, libcgroup, libgdiplus,
+	libssh2, libvncserver, libvorbis, linknx, linux-firmware, lxc,
+	lz4, mosquitto, openjpeg, openrc, poco, proftpd, pure-ftpd,
+	python3, python-multidict, python-setuptools-scm-git-archive,
+	qpdf, qt5tools, rdesktop, rocksdb, shellinabox, squid,
+	suricata, swig, systemd, taglib, util-linux, wireshark, zsh
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12571: ltp-testsuite : Build failure
+	#12576: 2020.02-RC1: error while loading shared libraries: ...
+	#12581: 2020.02-rc1 glibc failing to build on fedora 31
+
+2020.02-rc2, released February 26th, 2020
+
+	Fixes all over the tree.
+
+	Toolchain: Ensure strong SSP can only be enabled if the
+	(external) toolchain supports it.
+
+	Fix a race condition related to creating the output/staging
+	symlink on systems with coreutils < 8.27.
+
+	Drop support for the (end of life) Qt 5.6 variant.
+
+	Updated/fixed packages: at, armadillo, audiofile, bash,
+	busybox, erlang, fail2ban, fluidsynth, ipsec-tools, jpeg-turbo,
+	kvm-unit-tests, libftdi1, libinput, libsvgtiny, libtomcrypt,
+	libupnpp, libxml2, linux-tools, luv, mbedtls, mesa3d, minicom,
+	openvmtools, php, qt5, qt5webengine, qwt, radvd, rcw,
+	sdbusplus, systemd, tpm2-tss, vorbis-tools
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12581: 2020.02-rc1 glibc failing to build on fedora 31
+
+2020.02-rc1, released February 18th, 2020
+
+	Fixes all over the tree and new features.
+
+	Add experimental support for building with a per-package
+	target and host directory. This still has some rough edges,
+	but brings a number of advantages:
+
+	- Packages will only be able to access the explicitly listed
+          dependencies and not any other packages that happen to be
+          built before, ensuring correct dependency information in
+          Buildroot.
+
+	- Possibility for top-level parallel builds, speeding up
+          builds on multicore machines.
+
+	Core: Ensure package-file-lists data is correct after
+	incremental builds as well.
+
+	Architecture: Add support for ARC-HS38 with 64bit multiplier
+	variant, allow building glibc for big endian ARC, handle 16KB
+	MMU page size for ARC in toolchain wrapper.
+
+	Toolchain: Add binutils 2.33.1, GCC 7.5.0, Arm 9.2-2019.12
+	toolchains, ARC 2019.09 toolchain. Allow using custom kernel
+	headers newer than what is known by Buildroot.
+
+	pkg-stats: Support for CVE vulnerability reporting by
+	comparing to NVD database.
+
+	Reproducible builds: The go -trimpath option is now used to
+	get rid of absolute build paths, __FILE__ and __BASE_FILE__
+	defines are now handled in the toolchain wrapper.
+
+	Systemd: Build host variant and use systemctl to automatically
+	enable unit files rather than manually managing symlinks.
+
+	Util-linux: Ensure that hwclock is built without GPLv3
+	code. Notice that builds with hwclock has contained
+	GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+)
+
+	New defconfigs: Beelink GS1, Raspberrypi4 64bit
+
+	New packages: alura, avro-c, bubblewrap, cctz, cereal,
+	cpuburn-arm, elixir, erlang-base64url, erlang-idna,
+	erlang-jose, erlang-p1-acme, erlang-p1-mqtree,
+	erlang-p1-yconf, fluid-soundfont, fluidsynth, gcnano-binaries,
+	gensio, glslsandbox-player, libargon2, libmodsecurity,
+	libpam-nfc, libtelnet, lua-codegen, lua-livr, lua-livr-extra,
+	lua-rotas, lua-silva, mfoc, network-manager-openvpn,
+	nginx-modsecurity, perl-crypt-openssl-aes,
+	perl-math-prime-util, pipewire, ptm2human, python-aenum,
+	python-aiohttp-debugtoolbar, python-aiohttp-mako,
+	python-aiologstash, python-aiosignal, python-aiozipkin,
+	python-async-lru, python-avro, python-bunch, python-crontab,
+	python-dnspython, python-entrypoints, python-esptool,
+	python-frozenlist, python-future, python-gitdb, python-janus,
+	python-lockfile, python-logstash, python-nested-dict,
+	python-pbr, python-pyaes, python-pydantic, python-smmap2,
+	python-sockjs, python-zc-lockfile, raspi-gpio, rocksdb,
+	sdbusplus, spidermonkey, thermald, ti-sgx-libgbm, tinyssh,
+	tio, umtprd, weston-imx, wireguard-linux-compat,
+	wireguard-tools, xdg-dbus-proxy
+
+	Removed packages: bluez_utils, celt051, erlang-p1-iconv, fis,
+	gadgetfs-test, libplayer, gstreamer, gst-ffmpeg,
+	gst-fsl-plugins, gst-omapfb, gst-plugins-bad,
+	gst-plugins-base, gst-plugins-good, gst-plugins-ugly,
+	perl-digest-md5, perl-mime-base64, perl-net-ping,
+	python-scapy3k, wireguard
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11906: the new version of mesa3d cannot support etnaviv when..
+	#11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16
+	#12121: PyQt5.QtSerialPort and other modules not being built
+	#12256: package tar is outdated (1.29 is 3 years old
+	#12286: Can't import gobject in python 3.8
+	#12376: python-scapy3k is deprecated
+	#12386: carriage return issue when "make menuconfig"
+	#12441: qt5webengine build error: asm/errno.h: No such file or..
+	#12446: Buildroot fails to finish installing packages
+	#12456: qtvirtualkeyboard: No such file or directory
+	#12461: libglib2 build files with deep directory structure
+	#12481: minicom fails when output directory path contains "m4"
+	#12501: libnss-3.49.1: ld error: multiple definition of `gcm_..
+	#12526: host-nodejs 12.14.1: configure fail: AttributeError: ..
+	#12536: Linux-Headers extracting failure
+	#12546: Ninja 1.10 build Error
+
+2019.11.1, released January 12th, 2020
+
+	Important / security related fixes.
+
+	Infrastructure: kconfig: Fix reconfigure logic, python: Ensure
+	correct compiler and linker flags are used for compiled code
+
+	utils/scanpypi: Remind users to update DEVELOPERS
+
+	Defconfigs: imx6-sabresd: Fix the Qt5 display names,
+	imx8: Drop extra copy of U-Boot DTB
+
+	Updated/fixed packages: acsccid, bitcoin, boost, busybox,
+	cc-tool, cmocka, cpio, cups, dante, dialog, dillo, docker-cli,
+	docker-containerd, docker-engine, easy-rsa, ebtables,
+	ecryptfs-utils, efl, ffmpeg, gdb, git, glibc, gnupg2, go,
+	gpsd, grpc, gst1-plugins-bad, iputils, jasper,
+	kf5-kcoreaddons, leveldb, libarchive, libfribi, libgit2,
+	libkrb5, libp11, librsvg, libssh, libtomcrypt, libuio, libv4l,
+	lirc-tools, log4cplus, lrzip, lvm2, mali-t76x,
+	matchbox-desktop, mender-grubenv, mmc-utils, mosquitto,
+	nodejs, ntp, openipmi, opencv3, openpowerlink, openrc, pango,
+	perl-sys-cpu, pimd, postgresql, pulseaudio, python-brotli,
+	python-coherence, python-crc16, python-django, python-dpkt,
+	python-gobject, python-pyasn-modules, python-pypcap,
+	python-pyqt5, python-subprocess32, python3, qpdf,
+	qt-webkit-kiosk, qt5virtualkeyboard, qt5webengine, quota,
+	rabbitmq-c, rauc, rpcbind, rtl8821au, runc, rygel, samba4,
+	sdl2, setserial, snort, spidev_test,
+	sunxi-mali-mainline-driver, syslog-ng, sysrepo, tcllib, tftpd,
+	usbmount, w_scan, wavpack, wsapi, wsapi-fcgi, wsapi-xavante,
+	x265, xserver_xorg-server, ytree, zip
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12121: PyQt5.QtSerialPort and other modules not being built
+	#12286: Can't import gobject in python 3.8
+
+2019.11, released December 1st, 2019
+
+	Various fixes.
+
+	Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from
+	<pkg>_DL_OPTS by default, just like it is done for a number of
+	other package variables.
+
+	Add <pkg>_KEEP_PY_FILES to exclude specific python .py files
+	from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for
+	the (rare) case where the .py files are needed at runtime
+	rather than .pyc.
+
+	Updated/fixed packages: am33x-cm3, bind, collectd, go, gob2,
+	gst1-plugins-bad, haproxy, jasper, jpeg-turbo, libdrm,
+	libftdi, libftdi1, libnss, libselinux, libstrophe, lzma,
+	minicom, network-manager, nodejs, oniguruma, opencv3,
+	openvmtools, perl-gdgraph, perl-gdtextutil, prosody,
+	python-cchardet, systemd, tiff, wolfssl,
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11416: check-uniq-files staging issue
+	#12146: Oprofile runtime issue
+	#12166: Compiling nodejs for SAMA5D3 always crash with illegal inst..
+	#12171: Python-opencv needs config.py and config-3.7.py to run..
+	#12196: duma package
+	#12211: host-nodejs 10.15.3 package fail to build
+	#12316: tzdata fails to install with empty "default local time"
+	#12326: network-manager build fails with missing glib error
+	#12366: Gstreamer1 gst1-plugins-bad do not compile with RPI-Userland
+
+2019.11-rc3, released November 24th, 2019
+
+	Fixes all over the tree.
+
+	Updated/fixed packages: asterisk, clamav, domoticz, faifa,
+	gerbera, kmod, kvm-unit-tests, libupnp18, linux-serial-test,
+	lsof, ltp-testsuite, lxc, mesa3d, mesa3d-headers, perl, php,
+	postgresql, qemu, rauc, redis, rpcbind, spice, spice-protocol,
+	systemd, tftpd, waylandpp, webkitgtk, zip
+
+2019.11-rc2, released November 16th, 2019
+
+	Fixes all over the tree.
+
+	Toolchain: ARC tools bumped to arc-2019.09-rc1, ensure
+	external toolchain kernel headers version check correctly stop
+	the build on mismatch
+
+	Meson: Fix generation of global cross-compilation.conf
+
+	Download: Also use the package download method for extra
+	downloads from the same site, so it does not get confused by
+	URLs containing '+'
+
+	Defconfigs: Fix boot issue for beaglebone
+
+	Updated/fixed packages: bird, chrony, connman, dhcp, domoticz,
+	dropwatch, dtc, elf2flt, gettext-tiny, glog, intel-microcode,
+	ipsec-tools, jailhouse, kodi, libfribi, libmbim, libressl,
+	libsigrokdecode, libsvgtiny, linux-serial-test, ltp-testsuite,
+	lvm2, lxc, mariadb, mesa3d, minizip, ndisc6, neardal, ninja,
+	ofono, openvmtools, oracle-mysql, qt5wayland, safeclib, socat,
+	sudo, systemd, wpewebkit, xserver_xorg-server
+
+2019.11-rc1, released November 5th, 2019
+
+	Fixes all over the tree and new features.
+
+	Dependencies: Gcc/g++ 4.8 or newer is now required on the
+	build host.
+	Ensure host has JSON::PP perl module installed if
+	webkitgtk/wpewebkit packages are enabled as it is needed
+	during their build process.
+
+	Toolchain: Add support for the D programming language (GCC
+	9.x, Glibc).
+	GCC 9.x updated to 9.2.0, Glibc updated to 2.30, Musl updated
+	to 1.1.24, uClibc-ng updated to 1.0.32, ARC toolchain updated
+	to arc-2019.09-eng002.
+	Musl: Add a patch to add support for
+	sched_{get,set}scheduler() and sched_{get,set}param() for
+	compatibility.
+	Generate check-headers program under BUILD_DIR rather than
+	/tmp to fix issues with distributions mounting /tmp noexec.
+	Also copy libssp.so for external toolchains if SSP
+	to handle toolchains providing SSP support in libssp rather
+	than in the C library
+
+	New defconfigs: Beaglebone AI, FriendlyARM Nanopi NEO Plus2,
+	Libre Computer "La Frite", QEMU Armv7-A with trustzone/OP-TEE,
+	STM32MP157 Discovery Kit
+
+	Arch: RISC-V: Default to a sensible floating point ABI based
+	on the selected ISA extensions rather than always defaulting
+	to ILP32/64
+
+	Graph-size: Package sizes are now shown in human readable form
+	(Kib/Mib/Gib) rather than always in Kib. Binary (KB/MB/GB)
+	format can be selected using the --binary option. The cut-off
+	limit for classifying packages as "other" is now configurable
+	using the --size-limit option.
+
+	Br2-external: Linux kernel extensions can now also be provided
+	in an external tree by adding packages under
+	linux/linux-ext-*.mk. See the manual for details.
+
+	Fakeroot now works correctly under Microsoft Windows 10
+	Services for Linux, which does not provide SYSV IPC support
+
+	The check-uniq-files logic which would complain if multiple
+	packages would touch the same files has been removed as it
+	causes issues in certain situations (when packages are
+	rebuilt) and the issue is no longer considered a problem for
+	toplevel parallel builds as those will use a per-package
+	staging/target directory.
+	With this removed, Python is no longer required for a basic
+	build (only for optional scripts).
+
+	support/scripts/genimage.sh will no longer make a copy of
+	TARGET_DIR, speeding up post-build/image scripts.
+
+	The runtime test logic now uses Python 3.x.
+
+	A 'v' prefix has been dropped from the <pkg>_SOURCE variable
+	for a number of packages to match the version numbers used by
+	https://release-monitoring.org
+
+	New packages: caps, collectl, dav1d, fstrcmp, ima-evm-utils,
+	jitterentropy-library, kodi-vfs-rar, kodi-vfs-sftp, libavl,
+	libhttpserver, libmspack, libnetconf2, libolm, libyang,
+	linux-serial-test, lrzip, mdevd, minimodem, musl-fts, netifrc,
+	ogre, openlayers, python-aioredis, python-asgiref,
+	python-backports-functools-lru-cache, python-bluezero,
+	python-brotli, python-channels, python-channels-redis,
+	python-colorlog, python-daphne, python-django-enumfields,
+	python-jaraco-functools, python-kiwisolver, python-msgfy,
+	python-rpi-ws281x, python-setuptools-scm-git-archive,
+	python-simplelogging, python-soupsieve, python-sqliteschema,
+	python-sqlparse, python-tqdm, python-webencodings, qt5webview,
+	restclient-cpp, ripgrep, snmpclitools, sunwait, sysrepo,
+	uacme, utf8proc, uvw, ytree
+
+	Removed packages: alljoyn, alljoyn-base, alljoyn-tcl-base,
+	devmem2, eventlog, kodi-audiodecoder-opus,
+	kodi-screensaver-planestate, kodi-visualisation-waveforhue,
+	python-pysnmp-apps, riscv-pk, ustr
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#9881:  systemd-resolved not setting resolv.conf link
+	#10171: devmem2 w (word) is 8 bytes in x86 64 systems
+	#10586: musl gcc has ifunc enabled when musl doesn't support it
+	#10806: Allow nfs-utils to use ipv6
+	#11366: [2018.08] SysV IPC not available for fakeroot on WSL
+	#11411: check-uniq-files target issue
+	#11766: Console (getty) issues with systemd
+	#11781: mariadb build error
+	#12031: Build of cups-filters fails while linking, apparently due..
+	#12116: console prompt does not appear after login
+	#12141: eudev package is missing "render" and "kvm" groups
+	#12181: dropbear: norootlogin (-w) no longer works when PAM is enabled
+	#12186: Raspberry Pi Zero-W build fails on newer kernel versions
+	#12191: cmake BUILDDIR
+	#12241: Permission denied while running "make"
+	#12261: sudo versions prior to 1.8.28 are affected.
+	#12276: make clean/distclean does not remove BR2_DL_DIR and BR2_HOST_DIR
+	#12281: Custom configuration fails to build (based on raspberrypi3_..
+
+2019.08.3, released December 7th, 2019
+
+	Important / security related fixes.
+
+	Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from
+	<pkg>_DL_OPTS by default, just like it is done for a number of
+	other package variables
+
+	Add <pkg>_KEEP_PY_FILES to exclude specific python .py files
+	from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for
+	the (rare) case where the .py files are needed at runtime
+	rather than .pyc.
+
+	Fix <pkg>-reconfigure handling for packages using the kconfig
+	infrastructure.
+
+	Toolchain: ensure external toolchain kernel headers version
+	check correctly stop the build on mismatch
+
+	Deconfigs: beaglebone: fix boot issue
+
+	Updated/fixed packages: am33x-cm3, asterisk, bind, chrony,
+	clamav, cmocka, collectd, connman, dhcp, dropwatch, faifa,
+	gettext-tiny, gob2, haproxy, intel-microcode, ipsec-tools,
+	jailhouse, jasper, jpeg-turbo, kodi, kvm-unit-tests, libftdi,
+	libftdi1, libnss, libressl, libstrophe, libsvgtiny, lvm2,
+	lzma, mariadb, minicom, mosquitto, neardal, ninja, nodejs,
+	oniguruma, openvmtools, oracle-mysql, perl-gdgraph,
+	perl-gdtextutil, php, postgresql, prosody, python-cchardet,
+	python-django, qt5wayland, rabbitmq, rauc, redis, rpcbind,
+	socat, spice, spice-protocol, tftpd, tiff, webkitgtk
+
+	New packages: libmspack
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12166: Compiling nodejs for SAMA5D3 always crash with illegal inst..
+	#12171: Python-opencv needs config.py and config-3.7.py to run..
+	#12211: host-nodejs 10.15.3 package fail to build
+	#12316: tzdata fails to install with empty "default local time"
+
+2019.08.2, released November 9th, 2019
+
+	Important / security related fixes.
+
+	Toolchain: Also copy libssp.so for external toolchains if SSP
+	to handle toolchains providing SSP support in libssp rather
+	than in the C library
+
+	Download: Also use the package download method for extra
+	downloads from the same site, so it does not get confused by
+	URLs containing '+'
+
+	Fakeroot now works correctly under Microsoft Windows 10
+	Services for Linux, which does not provide SYSV IPC support
+
+	utils/test-pkg: ensure to exit with an error upon failure
+
+	Updated/fixed packages: asterisk, azmq, binutils,
+	cups-filters, domoticz, dtc, duma, elf2flt, eudev, exfat,
+	exfat-utils, fakeroot, fdk-aac, file, freerdp, gcc, gd,
+	ghostscript, go, gpsd, grpc, gst1-plugins-base, gvfs, icu,
+	intel-microcode, kvm-unit-tests, libfribidi, libnspr, libnss,
+	libopenssl, libpcap, libpciaccess, librsvg, libseccomp,
+	libsigrok, libtorrent, libunwind, libva, linux-tools,
+	lua-sdl2, lxc, minizip, mjpegtools, mongoose, mono, nbd,
+	nfs-utils, php, piglit, python, python-autobahn,
+	python-pysnmp-apps, python-tornado, python3, qemu, qt5base,
+	ruby, safeclib, samba4, sdl_mixer, sox, sudo, suricata,
+	systemd, tcpdump, unscd, util-linux, vdr-plugin-vnsiserver,
+	vtun, wireshark, xvisor, yaffs2utils
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11366: [2018.08] SysV IPC not available for fakeroot on WSL
+	#12261: sudo versions prior to 1.8.28 are affected
+
+2019.08.1, released October 3rd, 2019
+
+	Important / security related fixes.
+
+	Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone:
+	Use default console settings
+
+	Dependencies: Ensure host has JSON::PP perl module installed
+	if webkitgtk/wpewebkit packages are enabled as it is needed
+	during their build process.
+
+	Toolchain: Generate check-headers program under BUILD_DIR
+	rather than /tmp to fix issues with distributions mounting
+	/tmp noexec.
+
+	Updated/fixed packages: asterisk, augeas, axel, bind, bwm-ng,
+	cups, cups-filters, docker-cli, docker-engine, docker-proxy,
+	e2fsprogs, eudev, exim, expat, gcc, go, haveged, ifplugd, joe,
+	kf5-extra-cmake-modules, kf5-modemmanager-qt,
+	kf5-networkmanager-qt, libcamera, libcurl, libgcrypt,
+	libglib2, libgpg-error, libnspr, libnss, libopenssl,
+	logrotate, luksmeta, mariadb, mbedtls, mongodb, mosquitto,
+	ncurses, nfs-utils, nghttp2, nodejs, openvmtools, php,
+	protobuf, putty, qemu, samba4, snort, swupdate,
+	systemd-bootchart, thttpd, uclibc, unzip, util-linux,
+	wireshark
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#10806: Allow nfs-utils to use ipv6
+	#11781: mariadb build error
+	#12031: Build of cups-filters fails while linking, apparently due..
+	#12141: eudev package is missing "render" and "kvm" groups
+	#12241: Permission denied while running "make"
+
 2019.08, released September 1st, 2019
 
 	Various fixes.
@@ -160,6 +671,80 @@
 	#12051: package/dhcp installs libtool wrapper scripts on tar...
 	#12076: Patchelf can link against an incompatible libc++ ver...
 
+2019.05.3, Released October 3rd, 2019
+
+	Important / security related fixes.
+
+	Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone:
+	Use default console settings
+
+	Dependencies: Ensure host has JSON::PP perl module installed
+	if webkitgtk/wpewebkit packages are enabled as it is needed
+	during their build process.
+
+	Toolchain: Generate check-headers program under BUILD_DIR
+	rather than /tmp to fix issues with distributions mounting
+	/tmp noexec.
+
+	Updated/fixed packages: asterisk, augeas, bind, bwm-ng, cups,
+	cups-filters, docker-cli, docker-engine, docker-proxy,
+	e2fsprogs, eudev, exim, expat, gcc, go, haveged, ifplugd,
+	iptables, joe, kf5-extra-cmake-modules, kf5-modemmanager-qt,
+	kf5-networkmanager-qtlibcamera, libcurl, libgcrypt,
+	libgpg-error, libnftl, libnspr, libnss, libopenssl,
+	libtorrent-rasterbar, luksmeta, mariadb, mbedtls, mongodb,
+	mosquitto, ncurses, nfs-utils, nghttp2, nodejs, openvmtools,
+	php, protobuf, putty, qemu, samba4, swupdate,
+	systemd-bootchart, thttpd, uclibc, unzip, util-linux,
+	wireshark
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#10806: Allow nfs-utils to use ipv6
+	#11781: mariadb build error
+	#12031: Build of cups-filters fails while linking, apparently due..
+	#12141: eudev package is missing "render" and "kvm" groups
+	#12241: Permission denied while running "make"
+
+2019.05.2, Released September 3rd, 2019
+
+	Important / security related fixes.
+
+	Filesystems: Pass extra pax options to tar for binary
+	reproducibility.
+
+	Updated/fixed packages: apache, arm-trusted-firmware,
+	asterisk, atk, autofs, batctl, batman-adv, berkeleydb,
+	busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk,
+	dahdi-linux, dahdi-tools, daq, dehydrated, dhcp, dovecot,
+	dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib,
+	git, glib-networking, glibc, gnupg2, gnutls, go,
+	gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick,
+	imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl,
+	libgit2, libgtk2, libgtk3, libmodplug, libnss, libpri,
+	libshout, libss7, libssh2, libvips, libxcb, linux-headers,
+	mdadm, mesa3d, metacity, mpg123, mosquitto, musl, nginx,
+	oniguruma, openblas, opencv3, openjdk, openjdk-bin, openldap,
+	openvmtools, pcmanfm, php, pigpio, postgresql, prboom,
+	proftpd, proj, python, python-django, python-idna,
+	python-numpy, python-urllib3, python3, qemu, qt5, qt5base,
+	qt5enginio, quagga, rygel, squid, subversion, tcpreplay,
+	unzip, vlc, vte, webkitgtk, wireless-regdb, xen,
+	xfont_font-util, xlib_libICE, xlib_libXfont, xlib_libXfont2,
+	yad, zeromq
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11741: pigpio does not build host-pigpio
+	#11876: automount using host mount/umount
+	#11881: Build breaks with lftp package enabled and libexpat1-dev inst..
+	#11921: dahdi fails to build
+	#11961: libpri build failure
+	#12086: (dhcpd-missing-libs) - dhcp shared libraries not installed to..
+	#12096: tcpreplay: build fails if libdumbnet-dev is installed in the..
+	#12106: daq: build fails if libdumbnet-dev is installed in the host
+	#12126: vc4 has neon as hard dependency
+
 2019.05.1, Released July 7th, 2019
 
 	Important / security related fixes.
@@ -301,6 +886,177 @@
 	#11761: Building custom kernel 5.1-rc3 or later breaks on objtool
 	#11816: Only selected coreutils binaries are installed
 
+2019.02.9, released January 12th, 2020
+
+	Important / security related fixes.
+
+	pkg-python infrastructure: Ensure correct compiler and linker
+	flags are used for compiled code
+
+	utils/scanpypi: Remind users to update DEVELOPERS
+
+	Updated/fixed packages: busybox, cc-tool, cpio, cups, dante,
+	dillo, docker-cli, docker-containerd, docker-engine, easy-rsa,
+	ecryptfs-utils, efl, git, glibc, gnupg2, gst1-plugins-bad,
+	kf5-kcoreaddons, libarchive, libgit2, libkrb5, librsvg,
+	libssh, libtomcrypt, libuio, lirc-tools, lvm2,
+	matchbox-desktop, nodejs, ntp, opencv3, openpowerlink,
+	python-django, python-ecdsa, python-pyasn-modules,
+	python-pyqt5, python-subprocess32, python3, qpdf, runc, rygel,
+	samba4, sdl2, wavpack, xserver_xorg-server, zip
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12121: PyQt5.QtSerialPort and other modules not being built
+
+2019.02.8, released December 7th, 2019
+
+	Important / security related fixes.
+
+	Infrastructure: Make HOST_<pkg>_DL_OPTS inherit from
+	<pkg>_DL_OPTS by default, just like it is done for a number of
+	other package variables
+
+	Add <pkg>_KEEP_PY_FILES to exclude specific python .py files
+	from the removal done by BR2_PACKAGE_PYTHON{,3}_PYC_ONLY for
+	the (rare) case where the .py files are needed at runtime
+	rather than .pyc.
+
+	Fix <pkg>-reconfigure handling for packages using the kconfig
+	infrastructure.
+
+	Toolchain: ensure external toolchain kernel headers version
+	check correctly stop the build on mismatch
+
+	Deconfigs: beaglebone: fix boot issue
+
+	Updated/fixed packages: am33x-cm3, asterisk, bind, chrony,
+	clamav, collectd, connman, faifa, gob2, haproxy,
+	intel-microcode, ipsec-tools, jasper, jpeg-turbo, kodi,
+	kvm-unit-tests, libftdi, libftdi1, libnss, libstrophe,
+	libsvgtiny, lvm2, lzma, mariadb, minicom, neardal, nodejs,
+	opencv3, openvmtools, oracle-mysql, perl-gdgraph,
+	perl-gdtextutil, php, postgresql, prosody, python-django,
+	rabbitmq-c, rauc, redis, rpcbind, socat, spice,
+	spice-protocol, tftpd, tiff, webkitgtk
+
+	New packages: libmspack
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#12166: Compiling nodejs for SAMA5D3 always crash with illegal inst..
+	#12171: Python-opencv needs config.py and config-3.7.py to run..
+	#12211: host-nodejs 10.15.3 package fail to build
+	#12316: tzdata fails to install with empty "default local time"
+
+2019.02.7, Released November 10th, 2019
+
+	Important / security related fixes.
+
+	support/testing: use a kernel with HW_RANDOM_VIRTIO to work
+	around issues with lack of entrophy
+
+	Toolchain: Also copy libssp.so for external toolchains if SSP
+	is enabled to handle toolchains providing SSP support in
+	libssp rather than in the C library
+
+	Download: Also use the package download method for extra
+	downloads from the same site, so it does not get confused by
+	URLs containing '+'
+
+	Fakeroot now works correctly under Microsoft Windows 10
+	Services for Linux, which does not provide SYSV IPC support
+
+	utils/test-pkg: ensure to exit with an error upon failure
+
+	Updated/fixed packages: asterisk, azmq, cups-filters,
+	domoticz, duma, elf2flt, eudev, exfat, exfat-utils, fakeroot,
+	file, freerdp, gd, ghostscript, go, gvfs, intel-microcode,
+	kvm-unit-tests, libarchive, libnspr, libnss, libopenssl,
+	libpcap, libpciaccess, librsvg, libseccomp, libsigrok,
+	libtorrent, libunwind, linux-tools, lua-sdl2, lxc, minizip,
+	mjpegtools, mongoose, php, python, python-pysnmp-apps,
+	python3, qemu, qt5base, ruby, safeclib, samba4, sdl_mixer,
+	sox, sudo, systemd, tcpdump, unscd, util-lkinux, vtun, xvisor,
+	yaffs2utils
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11366: [2018.08] SysV IPC not available for fakeroot on WSL
+	#12261: sudo versions prior to 1.8.28 are affected
+
+2019.02.6, Released October 3rd, 2019
+
+	Important / security related fixes.
+
+	Defconfigs: AArch64-efi: Fix grub configuration, Beaglebone:
+	Use default console settings
+
+	Dependencies: Ensure host has JSON::PP perl module installed
+	if webkitgtk/wpewebkit packages are enabled as it is needed
+	during their build process.
+
+	Toolchain: Generate check-headers program under BUILD_DIR
+	rather than /tmp to fix issues with distributions mounting
+	/tmp noexec.
+
+	Updated/fixed packages: asterisk, augeas, bind, bwm-ng, cups,
+	cups-filters, docker-cli, docker-engine, docker-proxy,
+	dropbear, e2fsprogs, eudev, exim, expat, gcc, go, ifplugd,
+	haveged, iptables, joe, kf5-extra-cmake-modules,
+	kf5-modemmanager-qt, kf5-networkmanager-qt, libcurl,
+	libgcrypt, libgpg-error, libnftl, libnspr, libnss, libopenssl,
+	luksmeta, mariadb, mbedtls, mongodb, mosquitto, ncurses,
+	nfs-utils, nghttp2, nodejs, openvmtools, php, protobuf, putty,
+	qemu, qt5base, samba4, swupdate, systemd-bootchart, thttpd,
+	uclibc, unzip, util-linux, wireshark
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#10806: Allow nfs-utils to use ipv6
+	#11781: mariadb build error
+	#12031: Build of cups-filters fails while linking, apparently due..
+	#12141: eudev package is missing "render" and "kvm" groups
+	#12181: dropbear: norootlogin (-w) no longer works when PAM is enabled
+	#12241: Permission denied while running "make"
+
+2019.02.5, Released September 2nd, 2019
+
+	Important / security related fixes.
+
+	Filesystems: Pass extra pax options to tar for binary
+	reproducibility.
+
+	Updated/fixed packages: apache, arm-trusted-firmware,
+	asterisk, atk, autofs, batctl, batman-adv, berkeleydb, brotli,
+	busybox, bzip2, clamav, cloop, cmake, collectd, connman-gtk,
+	cryptopp, dahdi-linux, dahdi-tools, daq, dehydrated, dovecot,
+	dovecot-pigeonhole,, elfutils, evtest, exim, expect, giflib,
+	git, glib-networking, glibc, gnupg2, gnutls, go,
+	gst1-rtsp-server, gtkperf, gupnp-tools, gvfs, imagemagick,
+	imx-uuc, intel-microcode, json-glib, lftp, libbsd, libcurl,
+	libgit2, libgtk3, libmodplug, libnss, libpri, libshout,
+	libss7, libssh2, libvips, libxcb, linux-headers, mdadm,
+	mesa3d, metacity, mpg123, mosquitto, musl, nginx, openblas,
+	opencv3, openldap, openvmtools, pcmanfm, php, pigpio,
+	postgresql, prboom, proftpd, proj, python, python-django,
+	python-idna, python-numpy, python-urllib3, python3, qemu, qt5,
+	qt5base, qt5enginio, quagga, rygel, squid, subversion,
+	tcpreplay, unzip, vlc, vte, webkitgtk, weston, wireless-regdb,
+	xen, xfont_font-util, xlib_libICE, xlib_libXfont,
+	xlib_libXfont2, yad, zeromq
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#11741: pigpio does not build host-pigpio
+	#11876: automount using host mount/umount
+	#11881: Build breaks with lftp package enabled and libexpat1-dev inst..
+	#11921: dahdi fails to build
+	#11961: libpri build failure
+	#12096: tcpreplay: build fails if libdumbnet-dev is installed in the..
+	#12106: daq: build fails if libdumbnet-dev is installed in the host
+	#12126: vc4 has neon as hard dependency
+
 2019.02.4, Released July 10th, 2019
 
 	Important / security related fixes.
@@ -360,6 +1116,8 @@
 	sqlite, subversion, supertux, systemd, tslib, uclibc,
 	v4l2loopback, webkitgtk, woff2
 
+	Issues resolved (http://bugs.uclibc.org):
+
 	#11816: Only selected coreutils binaries are installed
 	#11841: grub-efi.cfg not used when building EFI disk image
 	#11911: systemd v240 memory leak in systemd-journald

Config.in

@@ -26,29 +26,9 @@ config BR2_HOST_GCC_VERSION
 	string
 	option env="HOST_GCC_VERSION"
 
-config BR2_HOST_GCC_AT_LEAST_4_5
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 5"
-
-config BR2_HOST_GCC_AT_LEAST_4_6
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 6"
-	select BR2_HOST_GCC_AT_LEAST_4_5
-
-config BR2_HOST_GCC_AT_LEAST_4_7
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 7"
-	select BR2_HOST_GCC_AT_LEAST_4_6
-
-config BR2_HOST_GCC_AT_LEAST_4_8
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 8"
-	select BR2_HOST_GCC_AT_LEAST_4_7
-
 config BR2_HOST_GCC_AT_LEAST_4_9
 	bool
 	default y if BR2_HOST_GCC_VERSION = "4 9"
-	select BR2_HOST_GCC_AT_LEAST_4_8
 
 config BR2_HOST_GCC_AT_LEAST_5
 	bool
@@ -70,6 +50,11 @@ config BR2_HOST_GCC_AT_LEAST_8
 	default y if BR2_HOST_GCC_VERSION = "8"
 	select BR2_HOST_GCC_AT_LEAST_7
 
+config BR2_HOST_GCC_AT_LEAST_9
+	bool
+	default y if BR2_HOST_GCC_VERSION = "9"
+	select BR2_HOST_GCC_AT_LEAST_8
+
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.
 
@@ -78,16 +63,6 @@ config BR2_HOST_GCC_AT_LEAST_8
 config BR2_NEEDS_HOST_JAVA
 	bool
 
-# Hidden boolean selected by packages in need of javac in order to build
-# (example: classpath)
-config BR2_NEEDS_HOST_JAVAC
-	bool
-
-# Hidden boolean selected by packages in need of jar in order to build
-# (example: classpath)
-config BR2_NEEDS_HOST_JAR
-	bool
-
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
 # toolchains, binary tools like SAM-BA, etc.).
@@ -556,7 +531,6 @@ endchoice
 config BR2_GOOGLE_BREAKPAD_ENABLE
 	bool "Enable google-breakpad support"
 	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_HOST_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
@@ -711,6 +685,24 @@ config BR2_REPRODUCIBLE
 	  This is labeled as an experimental feature, as not all
 	  packages behave properly to ensure reproducibility.
 
+config BR2_PER_PACKAGE_DIRECTORIES
+	bool "Use per-package directories (experimental)"
+	help
+	  This option will change the build process of Buildroot
+	  package to use per-package target and host directories.
+
+	  This is useful for two related purposes:
+
+	    - Cleanly isolate the build of each package, so that a
+	      given package only "sees" the dependencies it has
+	      explicitly expressed, and not other packages that may
+	      have by chance been built before.
+
+	    - Enable top-level parallel build.
+
+	  This is labeled as an experimental feature, as not all
+	  packages behave properly with per-package directories.
+
 endmenu
 
 comment "Security Hardening Options"
@@ -718,10 +710,15 @@ comment "Security Hardening Options"
 config BR2_PIC_PIE
 	bool "Build code with PIC/PIE"
 	depends on BR2_SHARED_LIBS
+	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	help
 	  Generate Position-Independent Code (PIC) and link
 	  Position-Independent Executables (PIE).
 
+comment "PIC/PIE needs a toolchain w/ PIE"
+	depends on BR2_SHARED_LIBS
+	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
+
 choice
 	bool "Stack Smashing Protection"
 	default BR2_SSP_ALL if BR2_ENABLE_SSP # legacy
@@ -756,6 +753,7 @@ config BR2_SSP_REGULAR
 
 config BR2_SSP_STRONG
 	bool "-fstack-protector-strong"
+	depends on BR2_TOOLCHAIN_HAS_SSP_STRONG
 	help
 	  Like -fstack-protector but includes additional functions to be
 	  protected - those that have local array definitions, or have
@@ -804,12 +802,16 @@ config BR2_RELRO_PARTIAL
 
 config BR2_RELRO_FULL
 	bool "Full"
+	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	select BR2_PIC_PIE
 	help
 	  This option includes the partial configuration, but also marks
 	  the GOT as read-only at the cost of initialization time during
 	  program loading, i.e every time an executable is started.
 
+comment "RELRO Full needs a toolchain w/ PIE"
+	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
+
 endchoice
 
 comment "RELocation Read Only (RELRO) needs shared libraries"

Config.in.legacy

@@ -144,6 +144,368 @@ endif
 
 ###############################################################################
 
+comment "Legacy options removed in 2020.02"
+
+config BR2_PACKAGE_JAMVM
+	bool "jamvm removed"
+	select BR2_LEGACY
+	help
+	  JamVM has not had a release since 2014 and is unmaintained.
+
+config BR2_PACKAGE_CLASSPATH
+	bool "classpath removed"
+	select BR2_LEGACY
+	help
+	  GNU Classpath package was removed. The last upstream
+	  release was in 2012 and there hasn't been a commit
+	  since 2016.
+
+config BR2_PACKAGE_QT5_VERSION_5_6
+	bool "qt 5.6 support removed"
+	select BR2_LEGACY
+	help
+	  Support for Qt 5.6 is EOL and has been removed. The current
+	  version (5.12 or later) has been selected instead.
+
+config BR2_PACKAGE_CURL
+	bool "BR2_PACKAGE_CURL was renamed"
+	select BR2_PACKAGE_LIBCURL_CURL
+	select BR2_LEGACY
+	help
+	  The BR2_PACKAGE_CURL config symbol was renamed to
+	  BR2_PACKAGE_LIBCURL_CURL.
+
+config BR2_PACKAGE_GSTREAMER
+	bool "gstreamer-0.10 removed"
+	select BR2_LEGACY
+	help
+	  Gstreamer-0.10 package was removed. It has been deprecated
+	  upstream since 2012, and is missing a lot of features and
+	  fixes compared to gstreamer-1.x.
+
+config BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_GSTREAMER_PLUGINS
+	bool "nvidia-tegra23 binaries gstreamer 0.10.x support removed"
+	select BR2_LEGACY
+	help
+	  Gstreamer 0.10.x is no longer available in Buildroot, so
+	  neither is the support in nvidia-tegra23 binaries.
+
+config BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_NV_SAMPLE_APPS
+	bool "nvidia-tegra23 binaries sample apps removed"
+	select BR2_LEGACY
+	help
+	  Gstreamer 0.10.x is no longer available in Buildroot, so
+	  neither is the support in nvidia-tegra23 binaries.
+
+config BR2_PACKAGE_FREERDP_GSTREAMER
+	bool "freerdp gstreamer 0.10.x support removed"
+	select BR2_LEGACY
+	help
+	  Gstreamer 0.10.x is no longer available in Buildroot, so
+	  neither is the support in freerdp.
+
+config BR2_PACKAGE_OPENCV3_WITH_GSTREAMER
+	bool "opencv3 gstreamer 0.10.x support removed"
+	select BR2_LEGACY
+	help
+	  Gstreamer 0.10.x is no longer available in Buildroot, so
+	  neither is the support in opencv3.
+
+config BR2_PACKAGE_OPENCV_WITH_GSTREAMER
+	bool "opencv gstreamer 0.10.x support removed"
+	select BR2_LEGACY
+	help
+	  Gstreamer 0.10.x is no longer available in Buildroot, so
+	  neither is the support in opencv.
+
+config BR2_PACKAGE_LIBPLAYER
+	bool "libplayer package was removed"
+	select BR2_LEGACY
+	help
+	  The libplayer package was removed. The latest release is
+	  from 2010 and none of the backends are available in
+	  Buildroot any more.
+
+config BR2_GCC_VERSION_OR1K
+	bool "gcc 5.x fork for or1k has been removed"
+	select BR2_LEGACY
+	help
+	  Support for gcc 5.x for or1k has been removed. The current
+	  default version (9.x or later) has been selected instead.
+
+config BR2_PACKAGE_BLUEZ_UTILS
+	bool "bluez-utils was removed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_BLUEZ5_UTILS if BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4 \
+		&& BR2_TOOLCHAIN_HAS_SYNC_4
+	help
+	  The bluez-utils (BlueZ 4.x) package was removed as it is
+	  deprecated since a long time. As an alternative, the
+	  bluez5-utils (BlueZ 5.x) has been automatically selected in
+	  your configuration.
+
+config BR2_PACKAGE_GADGETFS_TEST
+	bool "gadgetfs-test was removed"
+	select BR2_LEGACY
+	help
+	  The gadgetfs-test package was removed. Gadgetfs has been
+	  deprecated in favour of functionfs. Consider using
+	  gadget-tool (gt) instead.
+
+config BR2_PACKAGE_FIS
+	bool "fis was removed"
+	select BR2_LEGACY
+	help
+	  The fis package was removed.
+
+config BR2_PACKAGE_REFPOLICY_POLICY_VERSION
+	string "refpolicy policy version"
+	help
+	  The refpolicy policy version option has been moved to the
+	  libsepol package.
+
+config BR2_PACKAGE_REFPOLICY_POLICY_VERSION_WRAP
+	bool
+	default y if BR2_PACKAGE_REFPOLICY_POLICY_VERSION != ""
+	select BR2_LEGACY
+
+config BR2_PACKAGE_CELT051
+	bool "celt051 package was removed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_OPUS
+	help
+	  The celt051 package was removed as it is now obsolete since
+	  the CELT codec has been merged into the IETF Opus codec. As
+	  a result, the opus package has been automatically selected
+	  in your configuration.
+
+config BR2_PACKAGE_WIREGUARD
+	bool "wireguard package renamed"
+	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
+	select BR2_LEGACY
+	select BR2_PACKAGE_WIREGUARD_LINUX_COMPAT if BR2_LINUX_KERNEL
+	select BR2_PACKAGE_WIREGUARD_TOOLS
+	help
+	  The wireguard package has been renamed to wireguard-tools
+	  for the userspace tooling and wireguard-linux-compat for the
+	  kernel side for legacy (<5.6) kernels to match upstream.
+
+config BR2_PACKAGE_PERL_NET_PING
+	bool "perl-net-ping was removed"
+	select BR2_LEGACY
+	help
+	  Net::Ping is a Perl core module (ie. bundled with perl).
+
+config BR2_PACKAGE_PERL_MIME_BASE64
+	bool "perl-mime-base64 was removed"
+	select BR2_LEGACY
+	help
+	  MIME::Base64 is a Perl core module (ie. bundled with perl).
+
+config BR2_PACKAGE_PERL_DIGEST_MD5
+	bool "perl-digest-md5 was removed"
+	select BR2_LEGACY
+	help
+	  Digest::MD5 is a Perl core module (ie. bundled with perl).
+
+config BR2_PACKAGE_ERLANG_P1_ICONV
+	bool "erlang-p1-iconv has been removed"
+	select BR2_LEGACY
+	help
+	  The erlang-p1-iconv package was no longer used by ejabberd,
+	  and was no longer maintained upstream, so it was removed.
+
+config BR2_KERNEL_HEADERS_5_3
+	bool "kernel headers version 5.3.x are no longer supported"
+	select BR2_LEGACY
+	help
+	  Version 5.3.x of the Linux kernel headers are no longer
+	  maintained upstream and are now removed.
+
+config BR2_PACKAGE_PYTHON_SCAPY3K
+	bool "python-scapy3k is replaced by python-scapy"
+	select BR2_LEGACY
+	select BR2_PACKAGE_PYTHON_SCAPY
+	help
+	  python-scapy3k has been deprecated, since python-scapy has
+	  gained Python 3 support. Use BR2_PACKAGE_PYTHON_SCAPY
+	  instead.
+
+config BR2_BINUTILS_VERSION_2_30_X
+	bool "binutils version 2.30 support removed"
+	select BR2_LEGACY
+	help
+	  Support for binutils version 2.30 has been removed. The
+	  current default version (2.31 or later) has been selected
+	  instead.
+
+config BR2_PACKAGE_RPI_USERLAND_START_VCFILED
+	bool "rpi-userland start vcfiled was removed"
+	select BR2_LEGACY
+	help
+	  The vcfiled support was removed upstream.
+
+comment "Legacy options removed in 2019.11"
+
+config BR2_PACKAGE_OPENVMTOOLS_PROCPS
+	bool "openvmtools' procps support was removed"
+	select BR2_LEGACY
+	help
+	  Upstream stopped supporting this option a while ago.
+
+config BR2_PACKAGE_ALLJOYN
+	bool "alljoyn was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_PACKAGE_ALLJOYN_BASE
+	bool "alljoyn-base was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL
+	bool "alljoyn-base control panel was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION
+	bool "alljoyn-base notification was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING
+	bool "alljoyn-base onboarding was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_PACKAGE_ALLJOYN_TCL_BASE
+	bool "alljoyn-tcl-base was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_PACKAGE_ALLJOYN_TCL
+	bool "alljoyn-tcl was removed"
+	select BR2_LEGACY
+	help
+	  The alljoyn framework is dead
+
+config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
+	string "toolchain-external extra libs option has been renamed"
+	help
+	  The option BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS has
+	  been renamed to BR2_TOOLCHAIN_EXTRA_LIBS.
+
+config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS_WRAP
+	bool
+	default y if BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS != ""
+	select BR2_LEGACY
+
+config BR2_PACKAGE_PYTHON_PYSNMP_APPS
+	bool "python-pysnmp-apps was removed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_SNMPCLITOOLS
+	help
+	  Following upstream changes, the python-pysnmp-apps package
+	  has been removed, and snmpclitools should be used as a
+	  replacement.
+
+config BR2_KERNEL_HEADERS_5_2
+	bool "kernel headers version 5.2.x are no longer supported"
+	select BR2_LEGACY
+	help
+	  Version 5.2.x of the Linux kernel headers are no longer
+	  maintained upstream and are now removed.
+
+config BR2_TARGET_RISCV_PK
+	bool "riscv-pk was removed"
+	select BR2_LEGACY
+	help
+	  The RISC-V Proxy Kernel (pk) and Berkley Boot Loader (BBL)
+	  have been replaced with OpenSBI.
+
+config BR2_PACKAGE_SQLITE_STAT3
+	bool "sqlite stat3 support was removed"
+	select BR2_LEGACY
+	help
+	  Upstream removed the support for stat3.
+
+config BR2_KERNEL_HEADERS_5_1
+	bool "kernel headers version 5.1.x are no longer supported"
+	select BR2_LEGACY
+	help
+	  Version 5.1.x of the Linux kernel headers are no longer
+	  maintained upstream and are now removed.
+
+config BR2_PACKAGE_DEVMEM2
+	bool "devmem2 package was removed"
+	select BR2_LEGACY
+	help
+	  Use the the Busybox devmem utility, instead, which provides
+	  the same functionality.
+
+config BR2_PACKAGE_USTR
+	bool "ustr package removed"
+	select BR2_LEGACY
+	help
+	  The 'ustr' package was only used by SELinux libsemanage, but
+	  since SELinux 2.7, ustr is no longer used. Therefore, we
+	  removed this package from Buildroot.
+
+config BR2_PACKAGE_KODI_SCREENSAVER_PLANESTATE
+	bool "kodi-screensaver-planestate package was removed"
+	select BR2_LEGACY
+	help
+	  This package is incompatible with Kodi 18.x.
+
+config BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE
+	bool "kodi-visualisation-waveforhue package was removed"
+	select BR2_LEGACY
+	help
+	  This package is incompatible with Kodi 18.x.
+
+config BR2_PACKAGE_KODI_AUDIODECODER_OPUS
+	bool "kodi-audiodecoder-opus package was removed"
+	select BR2_LEGACY
+	help
+	  This package is incompatible with Kodi 18.x.
+
+config BR2_PACKAGE_MESA3D_OSMESA
+	bool "mesa OSMesa option renamed"
+	select BR2_PACKAGE_MESA3D_OSMESA_CLASSIC if BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST
+	select BR2_LEGACY
+	help
+	  The option was renamed in order to match the naming used
+	  by the meson buildsystem.
+
+config BR2_PACKAGE_HOSTAPD_DRIVER_RTW
+	bool "hostapd rtl871xdrv driver removed"
+	select BR2_LEGACY
+	help
+	  Since the update of hostapd to 2.9, the patch provided for
+	  the rtl871xdrv no longer works, although it
+	  applies. Moreover, AP support for Realtek chips is broken
+	  anyway in kernels > 4.9. Therefore, this option has been
+	  removed.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW
+	bool "new dbus support option in wpa_supplicant was renamed"
+	select BR2_PACKAGE_WPA_SUPPLICANT_DBUS if BR2_TOOLCHAIN_HAS_THREADS
+	select BR2_LEGACY
+	help
+	  The new dbus support option was renamed.
+
+config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_OLD
+	bool "old dbus support in wpa_supplicant was removed"
+	select BR2_LEGACY
+	help
+	  The old dbus support was removed.
+
 comment "Legacy options removed in 2019.08"
 
 config BR2_TARGET_TS4800_MBRBOOT

Makefile

@@ -2,7 +2,7 @@
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
-# Copyright (C) 2014-2019 by the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 2014-2020 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2019.08
+export BR2_VERSION := 2020.02.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1567371000
+BR2_VERSION_EPOCH = 1586551000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -188,6 +188,9 @@ ifneq ($(BR2_EXTERNAL_ERROR),)
 $(error $(BR2_EXTERNAL_ERROR))
 endif
 
+# Workaround bug in make-4.3: https://savannah.gnu.org/bugs/?57676
+$(BASE_DIR)/.br2-external.mk:;
+
 # To make sure that the environment variable overrides the .config option,
 # set this before including .config.
 ifneq ($(BR2_DL_DIR),)
@@ -204,6 +207,7 @@ BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
 BUILD_DIR := $(BASE_DIR)/build
 BINARIES_DIR := $(BASE_DIR)/images
 BASE_TARGET_DIR := $(BASE_DIR)/target
+PER_PACKAGE_DIR := $(BASE_DIR)/per-package
 # initial definition so that 'make clean' works for most users, even without
 # .config. HOST_DIR will be overwritten later when .config is included.
 HOST_DIR := $(BASE_DIR)/host
@@ -226,21 +230,12 @@ ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 -include $(BR2_CONFIG)
 endif
 
-# Parallel execution of this Makefile is disabled because it changes
-# the packages building order, that can be a problem for two reasons:
-# - If a package has an unspecified optional dependency and that
-#   dependency is present when the package is built, it is used,
-#   otherwise it isn't (but compilation happily proceeds) so the end
-#   result will differ if the order is swapped due to parallel
-#   building.
-# - Also changing the building order can be a problem if two packages
-#   manipulate the same file in the target directory.
-#
-# Taking into account the above considerations, if you still want to execute
-# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
-# use the -j<jobs> option when building, e.g:
-#      make -j$((`getconf _NPROCESSORS_ONLN`+1))
+ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),)
+# Disable top-level parallel build if per-package directories is not
+# used. Indeed, per-package directories is necessary to guarantee
+# determinism and reproducibility with top-level parallel build.
 .NOTPARALLEL:
+endif
 
 # timezone and locale may affect build output
 ifeq ($(BR2_REPRODUCIBLE),y)
@@ -348,7 +343,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \
 
 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 8
+HOSTCC_MAX_VERSION := 9
 
 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -452,19 +447,24 @@ XZCAT := $(call qstrip,$(BR2_XZCAT))
 LZCAT := $(call qstrip,$(BR2_LZCAT))
 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
 
-# packages compiled for the host go here
+ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),y)
+HOST_DIR = $(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/host,$(call qstrip,$(BR2_HOST_DIR)))
+TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/target,$(BASE_TARGET_DIR)))
+else
 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
-
-# The target directory is common to all packages,
-# but there is one that is specific to each filesystem.
 TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(BASE_TARGET_DIR))
+endif
 
 ifneq ($(HOST_DIR),$(BASE_DIR)/host)
 HOST_DIR_SYMLINK = $(BASE_DIR)/host
 $(HOST_DIR_SYMLINK): $(BASE_DIR)
-	ln -snf $(HOST_DIR) $(BASE_DIR)/host
+	ln -snf $(HOST_DIR) $(HOST_DIR_SYMLINK)
 endif
 
+STAGING_DIR_SYMLINK = $(BASE_DIR)/staging
+$(STAGING_DIR_SYMLINK): $(BASE_DIR)
+	ln -snf $(STAGING_DIR) $(STAGING_DIR_SYMLINK)
+
 # Quotes are needed for spaces and all in the original PATH content.
 BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(PATH)"
 
@@ -593,8 +593,8 @@ world: target-post-image
 .PHONY: prepare-sdk
 prepare-sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
-	$(TOPDIR)/support/scripts/fix-rpath host
-	$(TOPDIR)/support/scripts/fix-rpath staging
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath host
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath staging
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -698,8 +698,9 @@ define PURGE_LOCALES
 	rm -f $(LOCALE_WHITELIST)
 	for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done
 
-	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale)); \
+	for dir in $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale); \
 	do \
+		if [ ! -d $$dir ]; then continue; fi; \
 		for langdir in $$dir/*; \
 		do \
 			if [ -e "$${langdir}" ]; \
@@ -727,19 +728,22 @@ $(TARGETS_ROOTFS): target-finalize
 # Avoid the rootfs name leaking down the dependency chain
 target-finalize: ROOTFS=
 
-host-finalize: $(HOST_DIR_SYMLINK)
+TARGET_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list.txt))
+HOST_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-host.txt))
+STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt))
+
+.PHONY: host-finalize
+host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
+	@$(call MESSAGE,"Finalizing host directory")
+	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR))
 
 .PHONY: staging-finalize
-staging-finalize:
-	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
+staging-finalize: $(STAGING_DIR_SYMLINK)
 
 .PHONY: target-finalize
-target-finalize: $(PACKAGES) host-finalize
+target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
 	@$(call MESSAGE,"Finalizing target directory")
-	# Check files that are touched by more than one package
-	./support/scripts/check-uniq-files -t target $(BUILD_DIR)/packages-file-list.txt
-	./support/scripts/check-uniq-files -t staging $(BUILD_DIR)/packages-file-list-staging.txt
-	./support/scripts/check-uniq-files -t host $(BUILD_DIR)/packages-file-list-host.txt
+	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
@@ -779,7 +783,7 @@ endif
 	ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc
 
 	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	$(TOPDIR)/support/scripts/fix-rpath target
+	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath target
 
 # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
 # counterparts are appropriately setup as symlinks ones to the others.
@@ -801,6 +805,13 @@ endif # merged /usr
 		$(call MESSAGE,"Copying overlay $(d)"); \
 		$(call SYSTEM_RSYNC,$(d),$(TARGET_DIR))$(sep))
 
+	$(if $(TARGET_DIR_FILES_LISTS), \
+		cat $(TARGET_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list.txt
+	$(if $(HOST_DIR_FILES_LISTS), \
+		cat $(HOST_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-host.txt
+	$(if $(STAGING_DIR_FILES_LISTS), \
+		cat $(STAGING_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-staging.txt
+
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 		$(call MESSAGE,"Executing post-build script $(s)"); \
 		$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
@@ -892,7 +903,8 @@ graph-size:
 	$(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
 		--graph $(GRAPHS_DIR)/graph-size.$(BR_GRAPH_OUT) \
 		--file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
-		--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv
+		--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv \
+		$(BR2_GRAPH_SIZE_OPTS)
 
 .PHONY: check-dependencies
 check-dependencies:
@@ -1016,7 +1028,7 @@ savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 
 # staging and target directories do NOT list these as
 # dependencies anywhere else
-$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
+$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST) $(PER_PACKAGE_DIR):
 	@mkdir -p $@
 
 # outputmakefile generates a Makefile in the output directory, if using a
@@ -1048,7 +1060,7 @@ printvars:
 clean:
 	rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
-		$(LEGAL_INFO_DIR) $(GRAPHS_DIR)
+		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR)
 
 .PHONY: distclean
 distclean: clean

arch/Config.in.arc

@@ -15,11 +15,17 @@ config BR2_archs38
 	bool "ARC HS38"
 	help
 	  Generic ARC HS capable of running Linux, i.e. with MMU,
-	  caches and multiplier. Also it corresponds to the default
-	  configuration in older GNU toolchain versions.
+	  caches and 32-bit multiplier. Also it corresponds to the
+	  default configuration in older GNU toolchain versions.
 
-	  If you're not sure which version of ARC HS core you  build for
-	  keep this one.
+config BR2_archs38_64mpy
+	bool "ARC HS38 with 64-bit mpy"
+	help
+	  Fully featured ARC HS capable of running Linux, i.e. with
+	  MMU, caches and 64-bit multiplier.
+
+	  If you're not sure which version of ARC HS core you build
+	  for use this one.
 
 config BR2_archs38_full
 	bool "ARC HS38 with Quad MAC & FPU"
@@ -43,7 +49,7 @@ endchoice
 # Choice of atomic instructions presence
 config BR2_ARC_ATOMIC_EXT
 	bool "Atomic extension (LLOCK/SCOND instructions)"
-	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31
+	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
 
 config BR2_ARCH
 	default "arc"	if BR2_arcle
@@ -61,12 +67,13 @@ config BR2_GCC_TARGET_CPU
 	default "arc700" if BR2_arc750d
 	default "arc700" if BR2_arc770d
 	default "archs"	 if BR2_archs38
+	default "hs38"	 if BR2_archs38_64mpy
 	default "hs38_linux"	 if BR2_archs38_full
 	default "hs4x_rel31"	 if BR2_archs4x_rel31
 
 config BR2_READELF_ARCH_NAME
 	default "ARCompact"	if BR2_arc750d || BR2_arc770d
-	default "ARCv2"		if BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31
+	default "ARCv2"		if BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
 
 choice
 	prompt "MMU Page Size"
@@ -86,7 +93,7 @@ choice
 
 config BR2_ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
 
 config BR2_ARC_PAGE_SIZE_8K
 	bool "8KB"
@@ -96,7 +103,7 @@ config BR2_ARC_PAGE_SIZE_8K
 
 config BR2_ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
 
 endchoice
 

arch/Config.in.riscv

@@ -80,8 +80,12 @@ endchoice
 
 choice
 	prompt "Target ABI"
-	default BR2_RISCV_ABI_ILP32 if !BR2_ARCH_IS_64
-	default BR2_RISCV_ABI_LP64 if BR2_ARCH_IS_64
+	default BR2_RISCV_ABI_ILP32D if !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
+	default BR2_RISCV_ABI_ILP32F if !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
+	default BR2_RISCV_ABI_ILP32  if !BR2_ARCH_IS_64
+	default BR2_RISCV_ABI_LP64D  if BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
+	default BR2_RISCV_ABI_LP64F  if BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
+	default BR2_RISCV_ABI_LP64   if BR2_ARCH_IS_64
 
 config BR2_RISCV_ABI_ILP32
 	bool "ilp32"

arch/arch.mk.arc

@@ -1,4 +1,17 @@
+ifeq ($(BR2_arc),y)
+
 # -matomic is always required when the ARC core has the atomic extensions
-ifeq ($(BR2_arc)$(BR2_ARC_ATOMIC_EXT),yy)
+ifeq ($(BR2_ARC_ATOMIC_EXT),y)
 ARCH_TOOLCHAIN_WRAPPER_OPTS = -matomic
 endif
+
+# Explicitly set LD's "max-page-size" instead of relying on some defaults
+ifeq ($(BR2_ARC_PAGE_SIZE_4K),y)
+ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=4096
+else ifeq ($(BR2_ARC_PAGE_SIZE_8K),y)
+ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=8192
+else ifeq ($(BR2_ARC_PAGE_SIZE_16K),y)
+ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=16384
+endif
+
+endif

board/beagleboardx15/post-image.sh

@@ -1,15 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-    --rootpath "${TARGET_DIR}" \
-    --tmppath "${GENIMAGE_TMP}" \
-    --inputpath "${BINARIES_DIR}" \
-    --outputpath "${BINARIES_DIR}" \
-    --config "${GENIMAGE_CFG}"

board/beaglebone/linux-sgx.fragment

@@ -10,3 +10,4 @@ CONFIG_DRM_OMAP_WB_M2M=y
 CONFIG_DRM_TILCDC=y
 CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM=y
+CONFIG_DRM_LEGACY=y

board/beaglebone/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+cp $BOARD_DIR/uEnv.txt $BINARIES_DIR/uEnv.txt

board/beaglebone/post-image.sh

@@ -1,29 +0,0 @@
-#!/bin/sh
-# post-image.sh for CircuitCo BeagleBone and TI am335x-evm
-# 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
-# 2016, Lothar Felten <lothar.felten@gmail.com>
-
-BOARD_DIR="$(dirname $0)"
-
-# copy the uEnv.txt to the output/images directory
-cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
-
-# the 4.1 kernel does not provide a dtb for beaglebone green, so we
-# use a different genimage config if am335x-bonegreen.dtb is not
-# built:
-if [ -e ${BINARIES_DIR}/am335x-bonegreen.dtb ] ; then
-	GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-else
-	GENIMAGE_CFG="${BOARD_DIR}/genimage_linux41.cfg"
-fi
-
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-    --rootpath "${TARGET_DIR}" \
-    --tmppath "${GENIMAGE_TMP}" \
-    --inputpath "${BINARIES_DIR}" \
-    --outputpath "${BINARIES_DIR}" \
-    --config "${GENIMAGE_CFG}"

board/beaglebone/uEnv.txt

@@ -3,6 +3,9 @@ devtype=mmc
 bootdir=
 bootfile=zImage
 bootpartition=mmcblk0p2
+console=ttyS0,115200n8
+loadaddr=0x82000000
+fdtaddr=0x88000000
 set_mmc1=if test $board_name = A33515BB; then setenv bootpartition mmcblk1p2; fi
-set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait
+set_bootargs=setenv bootargs console=${console} root=/dev/${bootpartition} rw rootfstype=ext4 rootwait
 uenvcmd=run set_mmc1; run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr}

board/beagleboneai/genimage.cfg

@@ -0,0 +1,29 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"MLO",
+			"u-boot.img",
+			"zImage",
+			"am5729-beagleboneai.dtb",
+			"uEnv.txt"
+		}
+	}
+	size = 16M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		partition-type = 0xC
+		bootable = "true"
+                image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}

board/beagleboneai/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+cp board/beagleboneai/uEnv.txt $BINARIES_DIR/uEnv.txt

board/beagleboneai/readme.txt

@@ -0,0 +1,28 @@
+Intro
+=====
+
+This configuration will build a basic image for the BeagleBoard.org
+BeagleBone AI. For more details about the board, visit:
+
+https://beagleboard.org/ai
+
+How to build it
+===============
+
+Configure Buildroot:
+
+    $ make beagleboneai_defconfig
+
+Compile everything and build the USB flash drive image:
+
+    $ make
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

board/beagleboneai/uEnv.txt

@@ -0,0 +1,6 @@
+bootpart=0:1
+bootdir=/
+bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 ro rootwait
+devtype=mmc
+fdtfile=am5729-beagleboneai.dtb
+uenvcmd=run loadimage; run loadfdt; printenv bootargs; bootz ${loadaddr} - ${fdtaddr}

board/beelink/gs1/extlinux.conf

@@ -0,0 +1,4 @@
+label linux
+  kernel /Image
+  devicetree /sun50i-h6-beelink-gs1.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

board/beelink/gs1/genimage.cfg

@@ -0,0 +1,33 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h6-beelink-gs1.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot-sunxi-with-spl.bin"
+		offset = 8192
+		size = 1040384 # 1MB - 8192
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch

@@ -0,0 +1,39 @@
+From 523ab5be1a84e9aa15fb62c3a15a6338b01d3961 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
+Date: Tue, 9 Apr 2019 00:15:06 +0200
+Subject: [PATCH] plat: allwinner: common: use r_wdog instead of wdog
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Some Allwinner H6 has a broken watchdog that doesn't
+make the soc reboot.
+
+Use the R_WATCHDOG instead.
+
+Signed-off-by: Clément Péron <peron.clem@gmail.com>
+Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba
+---
+ plat/allwinner/common/sunxi_pm.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/plat/allwinner/common/sunxi_pm.c b/plat/allwinner/common/sunxi_pm.c
+index 1d2dc938..13e13532 100644
+--- a/plat/allwinner/common/sunxi_pm.c
++++ b/plat/allwinner/common/sunxi_pm.c
+@@ -20,9 +20,9 @@
+ #include <sunxi_mmap.h>
+ #include <sunxi_private.h>
+ 
+-#define SUNXI_WDOG0_CTRL_REG		(SUNXI_WDOG_BASE + 0x0010)
+-#define SUNXI_WDOG0_CFG_REG		(SUNXI_WDOG_BASE + 0x0014)
+-#define SUNXI_WDOG0_MODE_REG		(SUNXI_WDOG_BASE + 0x0018)
++#define SUNXI_WDOG0_CTRL_REG		(SUNXI_R_WDOG_BASE + 0x0010)
++#define SUNXI_WDOG0_CFG_REG		(SUNXI_R_WDOG_BASE + 0x0014)
++#define SUNXI_WDOG0_MODE_REG		(SUNXI_R_WDOG_BASE + 0x0018)
+ 
+ #define mpidr_is_valid(mpidr) ( \
+ 	MPIDR_AFFLVL3_VAL(mpidr) == 0 && \
+-- 
+2.20.1
+

board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch

@@ -0,0 +1,279 @@
+From 99cade8743158889b3e8db93c003b3318ebd4bda Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
+Date: Sun, 11 Aug 2019 22:38:57 +0200
+Subject: [PATCH] arm: dts: sync dts for Allwinner H6
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Sync Kernel DTS for Allwinner H6 boards.
+
+Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.
+
+commit <d45331b00ddb> Linux 5.3-rc4
+
+Signed-off-by: Clément Péron <peron.clem@gmail.com>
+---
+ arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 ++++++++++++++++++++++++++
+ arch/arm/dts/sun50i-h6-pine-h64.dts    | 12 ++++
+ arch/arm/dts/sun50i-h6.dtsi            | 46 +++++++++++++++-
+ 3 files changed, 131 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+index 54b0882bed..0dc33c90dd 100644
+--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
++++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+@@ -14,6 +14,7 @@
+ 	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+ 
+ 	aliases {
++		ethernet0 = &emac;
+ 		serial0 = &uart0;
+ 	};
+ 
+@@ -21,6 +22,17 @@
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
++	connector {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -41,6 +53,40 @@
+ 	};
+ };
+ 
++&de {
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&emac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ext_rgmii_pins>;
++	phy-mode = "rgmii";
++	phy-handle = <&ext_rgmii_phy>;
++	phy-supply = <&reg_aldo2>;
++	status = "okay";
++};
++
++&hdmi {
++	status = "okay";
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&mdio {
++	ext_rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++	};
++};
++
+ &mmc0 {
+ 	vmmc-supply = <&reg_cldo1>;
+ 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+@@ -57,6 +103,15 @@
+ 	status = "okay";
+ };
+ 
++&ohci0 {
++	status = "okay";
++};
++
++&pio {
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_aldo1>;
++};
++
+ &r_i2c {
+ 	status = "okay";
+ 
+@@ -177,8 +232,29 @@
+ 	};
+ };
+ 
++&r_pio {
++	/*
++	 * PL0 and PL1 are used for PMIC I2C
++	 * don't enable the pl-supply else
++	 * it will fail at boot
++	 *
++	 * vcc-pl-supply = <&reg_aldo1>;
++	 */
++	vcc-pm-supply = <&reg_aldo1>;
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_ph_pins>;
+ 	status = "okay";
+ };
++
++&usb2otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb2phy {
++	usb0_vbus-supply = <&reg_vcc5v>;
++	status = "okay";
++};
+diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
+index 4802902e12..1898345183 100644
+--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
++++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
+@@ -127,6 +127,12 @@
+ 	status = "okay";
+ };
+ 
++&pio {
++	vcc-pc-supply = <&reg_bldo2>;
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_aldo1>;
++};
++
+ &r_i2c {
+ 	status = "okay";
+ 
+@@ -243,10 +249,16 @@
+ 	pcf8563: rtc@51 {
+ 		compatible = "nxp,pcf8563";
+ 		reg = <0x51>;
++		interrupt-parent = <&r_intc>;
++		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ 		#clock-cells = <0>;
+ 	};
+ };
+ 
++&r_pio {
++	vcc-pm-supply = <&reg_aldo1>;
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_ph_pins>;
+diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
+index e0dc4a05c1..a117f479ae 100644
+--- a/arch/arm/dts/sun50i-h6.dtsi
++++ b/arch/arm/dts/sun50i-h6.dtsi
+@@ -101,7 +101,7 @@
+ 		#size-cells = <1>;
+ 		ranges;
+ 
+-		display-engine@1000000 {
++		bus@1000000 {
+ 			compatible = "allwinner,sun50i-h6-de3",
+ 				     "allwinner,sun50i-a64-de2";
+ 			reg = <0x1000000 0x400000>;
+@@ -203,11 +203,32 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		dma: dma-controller@3002000 {
++			compatible = "allwinner,sun50i-h6-dma";
++			reg = <0x03002000 0x1000>;
++			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
++			clock-names = "bus", "mbus";
++			dma-channels = <16>;
++			dma-requests = <46>;
++			resets = <&ccu RST_BUS_DMA>;
++			#dma-cells = <1>;
++		};
++
+ 		sid: sid@3006000 {
+ 			compatible = "allwinner,sun50i-h6-sid";
+ 			reg = <0x03006000 0x400>;
+ 		};
+ 
++		watchdog: watchdog@30090a0 {
++			compatible = "allwinner,sun50i-h6-wdt",
++				     "allwinner,sun6i-a31-wdt";
++			reg = <0x030090a0 0x20>;
++			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
++			/* Broken on some H6 boards */
++			status = "disabled";
++		};
++
+ 		pio: pinctrl@300b000 {
+ 			compatible = "allwinner,sun50i-h6-pinctrl";
+ 			reg = <0x0300b000 0x400>;
+@@ -243,6 +264,18 @@
+ 				bias-pull-up;
+ 			};
+ 
++			/*
++			 * /omit-if-no-ref/ isn't supported by U-boot
++			 * keep this comment to avoid bad sync with Linux
++			 */
++			mmc1_pins: mmc1-pins {
++				pins = "PG0", "PG1", "PG2", "PG3",
++				       "PG4", "PG5";
++				function = "mmc1";
++				drive-strength = <30>;
++				bias-pull-up;
++			};
++
+ 			mmc2_pins: mmc2-pins {
+ 				pins = "PC1", "PC4", "PC5", "PC6",
+ 				       "PC7", "PC8", "PC9", "PC10",
+@@ -294,6 +327,8 @@
+ 			resets = <&ccu RST_BUS_MMC1>;
+ 			reset-names = "ahb";
+ 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&mmc1_pins>;
+ 			status = "disabled";
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+@@ -445,7 +480,6 @@
+ 			resets = <&ccu RST_BUS_OHCI3>,
+ 				 <&ccu RST_BUS_EHCI3>;
+ 			phys = <&usb2phy 3>;
+-			phy-names = "usb";
+ 			status = "disabled";
+ 		};
+ 
+@@ -457,7 +491,6 @@
+ 				 <&ccu CLK_USB_OHCI3>;
+ 			resets = <&ccu RST_BUS_OHCI3>;
+ 			phys = <&usb2phy 3>;
+-			phy-names = "usb";
+ 			status = "disabled";
+ 		};
+ 
+@@ -613,6 +646,13 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		r_watchdog: watchdog@7020400 {
++			compatible = "allwinner,sun50i-h6-wdt",
++				     "allwinner,sun6i-a31-wdt";
++			reg = <0x07020400 0x20>;
++			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
++		};
++
+ 		r_intc: interrupt-controller@7021000 {
+ 			compatible = "allwinner,sun50i-h6-r-intc",
+ 				     "allwinner,sun6i-a31-r-intc";
+-- 
+2.20.1
+

board/beelink/gs1/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

board/ci20/genimage.cfg

@@ -24,6 +24,5 @@ image sdcard.img {
         partition-type = 0x83
         image = "rootfs.ext4"
         offset = 2M
-        size = 60M
     }
 }

board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json

@@ -4,7 +4,7 @@
   "pbuffers": true,
   "outputs": [
     {
-      "name": "LVDS-1",
+      "name": "LVDS1",
       "mode": "1280x800"
     }
   ]

board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json

@@ -4,7 +4,7 @@
   "pbuffers": true,
   "outputs": [
     {
-      "name": "LVDS-1",
+      "name": "LVDS1",
       "mode": "1280x480"
     }
   ]

board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json

@@ -4,7 +4,7 @@
   "pbuffers": true,
   "outputs": [
     {
-      "name": "LVDS-1",
+      "name": "LVDS1",
       "mode": "800x480"
     }
   ]

board/freescale/common/imx/imx8-bootloader-prepare.sh

@@ -10,14 +10,14 @@ main ()
 
 	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
 
 		${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
 
@@ -27,8 +27,11 @@ main ()
 		cat ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/mkimg.commit > ${BINARIES_DIR}/u-boot-hash.bin
 		cp ${BINARIES_DIR}/bl31.bin ${BINARIES_DIR}/u-boot-atf.bin
 		dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
-
-		${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
+		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
+			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
+		else
+			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
+		fi
 	fi
 
 	exit $?

board/freescale/common/imx/post-image.sh

@@ -32,7 +32,9 @@ linux_image()
 
 genimage_type()
 {
-	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
+	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
+		echo "genimage.cfg.template_imx8"
+	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"

board/freescale/imx6-sabresd/linux_qt5.fragment

@@ -2,4 +2,3 @@
 # ondemand governor with a mainline kernel.
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
-CONFIG_VIDEO_CODA=m

board/freescale/imx6-sabresd/readme.txt

@@ -80,6 +80,7 @@ Running kmscube application:
 Running Qt5 Cinematic Demo:
 
 # export QT_QPA_EGLFS_KMS_CONFIG=/root/sabresd.json
+# export QT_QPA_EGLFS_ALWAYS_SET_MODE=1
 # /usr/share/Qt5/CinematicExperience/Qt5_CinematicExperience
 
 Running gl2mark benchmark:

board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json

@@ -4,11 +4,11 @@
   "pbuffers": true,
   "outputs": [
     {
-      "name": "HDMI-1",
+      "name": "HDMI1",
       "mode": "off"
     },
     {
-      "name": "LVDS-1",
+      "name": "LVDS1",
       "mode": "1024x768"
     }
   ]

board/friendlyarm/nanopi-neo-plus2/extlinux.conf

@@ -0,0 +1,4 @@
+label linux
+  kernel /Image
+  devicetree /sun50i-h5-nanopi-neo-plus2.dtb
+  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait

board/friendlyarm/nanopi-neo-plus2/genimage.cfg

@@ -0,0 +1,39 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"Image",
+			"sun50i-h5-nanopi-neo-plus2.dtb",
+			"extlinux"
+		}
+	}
+	size = 64M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition spl {
+		in-partition-table = "no"
+		image = "sunxi-spl.bin"
+		offset = 8192
+	}
+
+	partition u-boot {
+		in-partition-table = "no"
+		image = "u-boot.itb"
+		offset = 40K
+		size = 1M # 1MB - 40K
+	}
+
+	partition boot {
+		partition-type = 0xC
+		bootable = "true"
+		image = "boot.vfat"
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+	}
+}

board/friendlyarm/nanopi-neo-plus2/linux-extras.config

@@ -0,0 +1,10 @@
+# wireless core
+CONFIG_WIRELESS=y
+CONFIG_CFG80211=y
+CONFIG_MAC80211=y
+CONFIG_CFG80211_WEXT=y
+
+# wireless drivers
+CONFIG_WLAN=y
+CONFIG_WLAN_VENDOR_BROADCOM=y
+CONFIG_BRCMFMAC=m

board/friendlyarm/nanopi-neo-plus2/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

board/friendlyarm/nanopi-neo-plus2/readme.txt

@@ -0,0 +1,37 @@
+Intro
+=====
+
+This default configuration will allow you to start experimenting with the
+buildroot environment for the Nanopi NEO Plus2. With the current configuration
+it will bring-up the board, and allow access through the serial console.
+
+Nanopi NEO2 link:
+http://nanopi.io/nanopi-neo-plus2.html
+
+Wiki link:
+http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
+
+This configuration uses U-Boot mainline and kernel mainline.
+
+How to build
+============
+
+    $ make friendlyarm_nanopi_neo_plus2_defconfig
+    $ make
+
+Note: you will need access to the internet to download the required
+sources.
+
+How to write the SD card
+========================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+  $ sudo sync
+
+Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
+is on the serial line, 115200 8N1.

board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt

@@ -0,0 +1,53 @@
+#AP6212_NVRAM_V1.0.1_20160606
+# 2.4 GHz, 20 MHz BW mode
+# The following parameter values are just placeholders, need to be updated.
+manfid=0x2d0
+prodid=0x0726
+vendid=0x14e4
+devid=0x43e2
+boardtype=0x0726
+boardrev=0x1101
+boardnum=22
+macaddr=00:90:4c:c5:12:38
+sromrev=11
+boardflags=0x00404201
+xtalfreq=26000
+nocrc=1
+ag0=255
+aa2g=1
+ccode=ALL
+
+pa0itssit=0x20
+extpagain2g=0
+
+#PA parameters for 2.4GHz, measured at CHIP OUTPUT
+pa2ga0=-168,7161,-820
+AvVmid_c0=0x0,0xc8
+cckpwroffset0=5
+
+# PPR params
+maxp2ga0=90
+txpwrbckof=6
+cckbw202gpo=0x5555
+legofdmbw202gpo=0x77777777
+mcsbw202gpo=0xaaaaaaaa
+
+# OFDM IIR :
+ofdmdigfilttype=7
+# PAPD mode:
+papdmode=2
+
+il0macaddr=00:90:4c:c5:12:38
+wl0id=0x431b
+
+#OOB parameters
+hostwake=0x40
+hostrdy=0x41
+usbrdy=0x03
+usbrdydelay=100
+deadman_to=0xffffffff
+# muxenab: 0x1 for UART enable, 0x10 for Host awake
+muxenab=0x10
+# CLDO PWM voltage settings - 0x4 - 1.1 volt
+#cldo_pwm=0x4
+glitch_based_crsmin=1

board/friendlyarm/nanopi-neo/genimage.cfg

@@ -29,6 +29,5 @@ image sdcard.img {
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
-		size = 32M
 	}
 }

board/friendlyarm/nanopi-neo/post-build.sh

@@ -1,12 +0,0 @@
-#!/bin/sh
-# post-build.sh for Nanopi NEO, based on the Orange Pi PC
-# 2013, Carlo Caione <carlo.caione@gmail.com>
-# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr>
-
-BOARD_DIR="$( dirname "${0}" )"
-MKIMAGE="${HOST_DIR}/bin/mkimage"
-BOOT_CMD="${BOARD_DIR}/boot.cmd"
-BOOT_CMD_H="${BINARIES_DIR}/boot.scr"
-
-# U-Boot script
-"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}"

board/friendlyarm/nanopi-neo/post-image.sh

@@ -1,15 +0,0 @@
-#!/bin/sh
-# post-image.sh for Nanopi NEO, based on the Orange Pi PC
-
-BOARD_DIR="$( dirname "${0}" )"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/librecomputer/lafrite/genimage.cfg

@@ -0,0 +1,10 @@
+image usb.img {
+	hdimage {
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}

board/librecomputer/lafrite/overlay/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label linux
+  kernel /boot/Image
+  devicetree /boot/meson-gxl-s805x-libretech-ac.dtb
+  append console=ttyAML0,115200 earlyprintk root=/dev/sda1 rootwait

board/librecomputer/lafrite/readme.txt

@@ -0,0 +1,34 @@
+Intro
+=====
+
+Libre Computer "La Frite" is a low cost SBC based around an Amlogic
+s805x SoC (quad A53), 512MB/1GB DDR4 and a 16MB SPI NOR flash:
+
+https://libre.computer/products/boards/aml-s805x-ac/
+
+How to build it
+===============
+
+Configure Buildroot:
+
+    $ make lafrite_defconfig
+
+Compile everything and build the USB flash drive image:
+
+    $ make
+
+How to write the USB flash drive image
+======================================
+
+Once the build process is finished you will have an image called "usb.img"
+in the output/images/ directory.
+
+Copy the bootable "usb.img" onto a USB flash drive with "dd":
+
+  $ sudo dd if=output/images/usb.img of=/dev/sdX
+
+How to boot
+===========
+
+Insert flash drive to the USB connector furthest away from the IR
+receiver and power up board. The system will boot automatically.

board/minnowboard/post-image.sh

@@ -1,13 +0,0 @@
-#!/bin/sh -e
-
-GENIMAGE_CFG="board/minnowboard/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-    --rootpath "${TARGET_DIR}" \
-    --tmppath "${GENIMAGE_TMP}" \
-    --inputpath "${BINARIES_DIR}" \
-    --outputpath "${BINARIES_DIR}" \
-    --config "${GENIMAGE_CFG}"

board/pandaboard/post-image.sh

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                           \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"
-
-exit $?

board/pc/genimage-efi.cfg

@@ -0,0 +1,35 @@
+image efi-part.vfat {
+  vfat {
+    file startup.nsh {
+      image = "efi-part/startup.nsh"
+    }
+    file EFI {
+      image = "efi-part/EFI"
+    }
+    file bzImage {
+      image = "bzImage"
+    }
+  }
+  size = 16777216
+}
+
+image disk.img {
+  hdimage {
+    gpt = true
+  }
+
+  partition boot {
+    image = "efi-part.vfat"
+    partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+    offset = 32768
+    size = 16777216
+    bootable = true
+  }
+
+  partition root {
+    partition-type-uuid = 44479540-f297-41b2-9af7-d131d5f0458a
+    partition-uuid = UUID_TMP
+    image = "rootfs.ext2"
+    offset = 16809984
+  }
+}

board/pc/grub-efi.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+ linux /bzImage root=PARTUUID=UUID_TMP rootwait console=tty1
+}

board/pc/post-build.sh

@@ -4,7 +4,12 @@ set -e
 
 BOARD_DIR=$(dirname "$0")
 
-cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"
+# Detect boot strategy, EFI or BIOS
+if [ -f "$BINARIES_DIR/efi-part/startup.nsh" ]; then
+    cp -f "$BOARD_DIR/grub-efi.cfg" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
+else
+    cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"
 
-# Copy grub 1st stage to binaries, required for genimage
-cp -f "$HOST_DIR/lib/grub/i386-pc/boot.img" "$BINARIES_DIR"
+    # Copy grub 1st stage to binaries, required for genimage
+    cp -f "$HOST_DIR/lib/grub/i386-pc/boot.img" "$BINARIES_DIR"
+fi

board/pc/post-image-efi-gpt.sh

@@ -1,62 +0,0 @@
-#!/bin/sh
-
-set -e
-
-cd ${BINARIES_DIR}
-
-# GPT partition type UUIDs
-esp_type=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
-linux_type=44479540-f297-41b2-9af7-d131d5f0458a
-
-# Partition UUIDs
-efi_part_uuid=$(uuidgen)
-root_part_uuid=$(uuidgen)
-
-# Boot partition offset and size, in 512-byte sectors
-efi_part_start=64
-efi_part_size=32768
-
-# Rootfs partition offset and size, in 512-byte sectors
-root_part_start=$(( efi_part_start + efi_part_size ))
-root_part_size=$(( $(stat -c %s rootfs.ext2) / 512 ))
-
-first_lba=34
-last_lba=$(( root_part_start + root_part_size ))
-
-# Disk image size in 512-byte sectors
-image_size=$(( last_lba + first_lba ))
-
-cat > efi-part/EFI/BOOT/grub.cfg <<EOF
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
-	linux /bzImage root=PARTUUID=$root_part_uuid rootwait console=tty1
-}
-EOF
-
-# Create EFI system partition
-rm -f efi-part.vfat
-dd if=/dev/zero of=efi-part.vfat bs=512 count=0 seek=$efi_part_size
-mkdosfs  efi-part.vfat
-mcopy -bsp -i efi-part.vfat efi-part/startup.nsh ::startup.nsh
-mcopy -bsp -i efi-part.vfat efi-part/EFI ::EFI
-mcopy -bsp -i efi-part.vfat bzImage ::bzImage
-
-rm -f disk.img
-dd if=/dev/zero of=disk.img bs=512 count=0 seek=$image_size
-
-sfdisk disk.img <<EOF
-label: gpt
-label-id: $(uuidgen)
-device: /dev/foobar0
-unit: sectors
-first-lba: $first_lba
-last-lba: $last_lba
-
-/dev/foobar0p1 : start=$efi_part_start,  size=$efi_part_size,  type=$esp_type,   uuid=$efi_part_uuid,  name="efi-part.vfat"
-/dev/foobar0p2 : start=$root_part_start, size=$root_part_size, type=$linux_type, uuid=$root_part_uuid, name="rootfs.ext2"
-EOF
-
-dd if=efi-part.vfat of=disk.img bs=512 count=$efi_part_size seek=$efi_part_start conv=notrunc
-dd if=rootfs.ext2   of=disk.img bs=512 count=$root_part_size seek=$root_part_start conv=notrunc

board/pc/post-image-efi.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+
+set -e
+
+UUID=$(dumpe2fs "$BINARIES_DIR/rootfs.ext2" 2>/dev/null | sed -n 's/^Filesystem UUID: *\(.*\)/\1/p')
+sed -i "s/UUID_TMP/$UUID/g" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
+sed "s/UUID_TMP/$UUID/g" board/pc/genimage-efi.cfg > "$BINARIES_DIR/genimage-efi.cfg"
+support/scripts/genimage.sh -c "$BINARIES_DIR/genimage-efi.cfg"

board/qemu/arm-vexpress-tz/linux.fragment

@@ -0,0 +1,3 @@
+### Enable OP-TEE
+CONFIG_TEE=y
+CONFIG_OPTEE=y

board/qemu/arm-vexpress-tz/post-build.sh

@@ -0,0 +1,10 @@
+#!/bin/sh
+
+set -u
+set -e
+
+# Rename boot images for the dear TF-A
+ln -sf u-boot.bin ${BINARIES_DIR}/bl33.bin
+ln -sf tee-header_v2.bin ${BINARIES_DIR}/bl32.bin
+ln -sf tee-pager_v2.bin ${BINARIES_DIR}/bl32_extra1.bin
+ln -sf tee-pageable_v2.bin ${BINARIES_DIR}/bl32_extra2.bin

board/qemu/arm-vexpress-tz/readme.txt

@@ -0,0 +1,138 @@
+Board qemu_arm_vexpress_tz builds a QEMU ARMv7-A target system with
+OP-TEE running in the TrustZone secure world and a Linux based
+OS running in the non-secure world. The board configuration enables
+builds of the QEMU host ARM target emulator.
+
+  make qemu_arm_vexpress_tz_defconfig
+  make
+
+The BIOS used in the QEMU host is the ARM Trusted Firmware-A (TF-A). TF-A
+uses QEMU semihosting file access to access boot image files. The
+QEMU platform is quite specific for that in TF-A and one needs to
+run the emulation from the image directory for TF-A to boot the
+secure and non-secure worlds.
+
+  cd output/images && ../host/bin/qemu-system-arm \
+	-machine virt -machine secure=on -cpu cortex-a15 \
+	-smp 1 -s -m 1024 -d unimp \
+	-serial stdio \
+	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
+	-semihosting-config enable,target=native \
+	-bios bl1.bin
+
+The boot stage traces (if any) followed by the login prompt will appear
+in the terminal that started QEMU.
+
+If you want to emulate more cores, use "-smp {1|2|3|4}" to select the
+number of cores.
+
+Note: "-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic"
+brings network support that is used i.e. in OP-TEE regression tests.
+
+Tested with QEMU 2.12.0, and 3.1.0.
+
+
+-- Boot Details --
+
+TF-A is used as QEMU BIOS. Its BL1 image boots and load its BL2 image. In turn,
+this image loads the OP-TEE secure world (ARMv7-A BL32 stage) and the U-boot as
+non-secure bootloader (BL33 stage).
+
+QEMU natively hosts and loads in RAM the QEMU ARM target device tree. OP-TEE
+reads and modifies its content according to OP-TEE configuration.
+
+Enable TF-A traces from LOG_LEVEL (I.e LOG_LEVEL=40) from
+BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
+
+
+-- OP-TEE Traces --
+
+Secure boot stages and/or secure runtime services may use a serial link for
+their traces.
+
+The ARM Trusted Firmware outputs its traces on the QEMU standard (first)
+serial interface.
+
+The OP-TEE OS uses the QEMU second serial interface.
+
+To get the OP-TEE OS traces, append a second -serial argument after
+-serial stdio in the QEMU command line. I.e, the following enables 2 serial
+consoles over telnet connections:
+
+  cd output/images && ../host/bin/qemu-system-arm \
+	-machine virt -machine secure=on -cpu cortex-a15 \
+	-smp 1 -s -m 1024 -d unimp \
+	-serial telnet:127.0.0.1:1235,server \
+	-serial telnet:127.0.0.1:1236,server \
+	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
+	-semihosting-config enable,target=native \
+	-bios bl1.bin
+
+QEMU is now waiting for the telnet connection. From another shell, open a
+telnet connection on the port for the U-boot and Linux consoles:
+
+  telnet 127.0.0.1 1235
+
+and again for the secure console
+
+  telnet 127.0.0.1 1236
+
+
+-- Using gdb --
+
+One can debug the OP-TEE secure world using GDB through the QEMU host.
+To do so, simply run the qemu-system-arm emulation, then run a GDB client
+and connect the QEMU internal GDB server.
+
+The example below assumes we run QEMU and the GDB client from the same
+host computer. We use option -S of qemu-system-arm to make QEMU
+waiting for the GDB continue instruction before booting the images.
+
+From a first shell:
+  cd output/images && ../host/bin/qemu-system-arm \
+	-machine virt -machine secure=on -cpu cortex-a15 \
+	-smp 1 -s -m 1024 -d unimp \
+	-serial stdio \
+	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
+	-semihosting-config enable,target=native \
+	-bios bl1.bin \
+	-S
+
+From a second shell:
+  ./output/host/bin/arm-linux-gdb
+  GNU gdb (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.1.1.20180704-git
+  Copyright (C) 2018 Free Software Foundation, Inc.
+  ...
+  For help, type "help".
+  Type "apropos word" to search for commands related to "word".
+  (gdb)
+
+From this GDB console, connect to the target, load the OP-TEE core symbols,
+set a breakpoint to its entry point (__text_start) and start emulation:
+
+  (gdb) target remote 127.0.0.1:1234
+  (gdb) symbol-file ./output/build/optee-os-<reference>/out/arm/core/tee.elf
+  (gdb) hbreak __text_start
+  Hardware assisted breakpoint 1 at 0xe100000: file core/arch/arm/kernel/generic_entry_a32.S, line 246.
+  (gdb) cont
+  Continuing.
+
+  Thread 1 hit Breakpoint 1, _start () at core/arch/arm/kernel/generic_entry_a32.S:246
+  246		bootargs_entry
+  (gdb)
+
+
+Emulation has started, TF-A has loaded OP-TEE and U-boot images in memory and
+has booted OP-TEE. Emulation stopped at OP-TEE core entry.
+
+Note: QEMU hosts a GDB service listening to TCP port 1234, as set through
+qemu-system-arm command line option -s.
+
+Note: To build the GDB server, the following extra options have to be added to
+the Buildroot configuration:
+
+    BR2_ENABLE_DEBUG=y
+    BR2_PACKAGE_GDB=y
+    BR2_PACKAGE_HOST_GDB=y
+    BR2_TOOLCHAIN_BUILDROOT_CXX=y
+    BR2_TOOLCHAIN_BUILDROOT_GLIBC=y

board/qemu/arm-vexpress-tz/u-boot.config

@@ -0,0 +1,7 @@
+CONFIG_SYS_TEXT_BASE=0x60000000
+CONFIG_BOOTCOMMAND="fdt addr ${fdt_addr} && fdt resize 1000 && smhload zImage ${kernel_addr_r} && smhload rootfs.cpio.gz ${ramdisk_addr_r} ramdisk_addr_end &&  setenv bootargs console=ttyAMA0,115200 earlyprintk=serial,ttyAMA0,115200 && fdt chosen ${ramdisk_addr_r} ${ramdisk_addr_end} && bootz ${kernel_addr_r} - ${fdt_addr}"
+CONFIG_SEMIHOSTING=y
+# Drop flash accesses
+CONFIG_ENV_IS_IN_FLASH=n
+CONFIG_MTD=n
+CONFIG_MTD_NOR_FLASH=n

board/qemu/x86/post-build.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+set -u
+set -e
+
+# Add a console on tty1
+if [ -e ${TARGET_DIR}/etc/inittab ]; then
+    grep -qE '^tty1::' ${TARGET_DIR}/etc/inittab || \
+	sed -i '/GENERIC_SERIAL/a\
+tty1::respawn:/sbin/getty -L  tty1 0 vt100 # QEMU graphical window' ${TARGET_DIR}/etc/inittab
+fi

board/qemu/x86/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda" -net nic,model=virtio -net user
+  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -serial stdio -net nic,model=virtio -net user
 
 Optionally add -smp N to emulate a SMP system with N CPUs.
 

board/qemu/x86_64/post-build.sh

@@ -0,0 +1,11 @@
+#!/bin/sh
+
+set -u
+set -e
+
+# Add a console on tty1
+if [ -e ${TARGET_DIR}/etc/inittab ]; then
+    grep -qE '^tty1::' ${TARGET_DIR}/etc/inittab || \
+	sed -i '/GENERIC_SERIAL/a\
+tty1::respawn:/sbin/getty -L  tty1 0 vt100 # QEMU graphical window' ${TARGET_DIR}/etc/inittab
+fi

board/qemu/x86_64/readme.txt

@@ -1,6 +1,6 @@
 Run the emulation with:
 
-  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda" -net nic,model=virtio -net user
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -serial stdio -net nic,model=virtio -net user
 
 Optionally add -smp N to emulate a SMP system with N CPUs.
 

board/raspberrypi/genimage-raspberrypi0.cfg

@@ -1,7 +1,7 @@
 image boot.vfat {
   vfat {
     files = {
-      "bcm2708-rpi-b-plus.dtb",
+      "bcm2708-rpi-zero.dtb",
       "rpi-firmware/bootcode.bin",
       "rpi-firmware/cmdline.txt",
       "rpi-firmware/config.txt",

board/raspberrypi/genimage-raspberrypi0w.cfg

@@ -1,7 +1,7 @@
 image boot.vfat {
   vfat {
     files = {
-      "bcm2708-rpi-0-w.dtb",
+      "bcm2708-rpi-zero-w.dtb",
       "rpi-firmware/bootcode.bin",
       "rpi-firmware/cmdline.txt",
       "rpi-firmware/config.txt",

board/raspberrypi/genimage-raspberrypi4-64.cfg

@@ -0,0 +1,30 @@
+image boot.vfat {
+  vfat {
+    files = {
+      "bcm2711-rpi-4-b.dtb",
+      "rpi-firmware/cmdline.txt",
+      "rpi-firmware/config.txt",
+      "rpi-firmware/fixup4.dat",
+      "rpi-firmware/start4.elf",
+      "rpi-firmware/overlays",
+      "Image"
+    }
+  }
+  size = 32M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+  }
+}

board/raspberrypi/post-image.sh

@@ -10,13 +10,13 @@ GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
 for arg in "$@"
 do
 	case "${arg}" in
-		--add-pi3-miniuart-bt-overlay)
+		--add-miniuart-bt-overlay)
 		if ! grep -qE '^dtoverlay=' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
-			echo "Adding 'dtoverlay=pi3-miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
+			echo "Adding 'dtoverlay=miniuart-bt' to config.txt (fixes ttyAMA0 serial console)."
 			cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
 
-# fixes rpi3 ttyAMA0 serial console
-dtoverlay=pi3-miniuart-bt
+# fixes rpi (3B, 3B+, 3A+, 4B and Zero W) ttyAMA0 serial console
+dtoverlay=miniuart-bt
 __EOF__
 		fi
 		;;
@@ -28,15 +28,6 @@ __EOF__
 
 # enable 64bits support
 arm_64bit=1
-__EOF__
-		fi
-
-		# Enable uart console
-		if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
-			cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
-
-# enable rpi3 ttyS0 serial console
-enable_uart=1
 __EOF__
 		fi
 		;;
@@ -49,10 +40,18 @@ __EOF__
 
 done
 
+# Pass an empty rootpath. genimage makes a full copy of the given rootpath to
+# ${GENIMAGE_TMP}/root so passing TARGET_DIR would be a waste of time and disk
+# space. We don't rely on genimage to build the rootfs image, just to insert a
+# pre-built one in the disk image.
+
+trap 'rm -rf "${ROOTPATH_TMP}"' EXIT
+ROOTPATH_TMP="$(mktemp -d)"
+
 rm -rf "${GENIMAGE_TMP}"
 
-genimage                           \
-	--rootpath "${TARGET_DIR}"     \
+genimage \
+	--rootpath "${ROOTPATH_TMP}"   \
 	--tmppath "${GENIMAGE_TMP}"    \
 	--inputpath "${BINARIES_DIR}"  \
 	--outputpath "${BINARIES_DIR}" \

board/raspberrypi/readme.txt

@@ -78,7 +78,7 @@ After building, you should obtain this tree:
 [1] Not all of them will be present, depending on the RaspberryPi
     model you are using.
 
-[2] Only for the Raspberry Pi 3/4 Models (overlay pi3-miniuart-bt is needed
+[2] Only for the Raspberry Pi 3/4 Models (overlay miniuart-bt is needed
     to enable the RPi3 serial console otherwise occupied by the bluetooth
     chip). Alternative would be to disable the serial console in cmdline.txt
     and /etc/inittab.

board/raspberrypi4-64

@@ -0,0 +1 @@
+raspberrypi

board/roseapplepi/post-build.sh

@@ -0,0 +1,4 @@
+#!/bin/sh
+BOARD_DIR="$(dirname $0)"
+
+cp $BOARD_DIR/uEnv.txt $BINARIES_DIR/uEnv.txt

board/roseapplepi/post-image.sh

@@ -1,18 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-cp "${BOARD_DIR}/uEnv.txt" "${BINARIES_DIR}"
-
-genimage                           \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"
-
-exit $?

board/solidrun/clearfog_gt_8k/linux-extras.config

@@ -1,4 +1,6 @@
 CONFIG_MARVELL_PHY=y
 CONFIG_SFP=y
+CONFIG_IPV6=y
+CONFIG_BRIDGE=y
 CONFIG_NET_DSA=y
 CONFIG_NET_DSA_MV88E6XXX=y

board/stmicroelectronics/stm32mp157c-dk2/genimage.cfg

@@ -0,0 +1,24 @@
+image sdcard.img {
+	hdimage {
+		gpt = "true"
+	}
+
+	partition fsbl1 {
+		image = "u-boot-spl.stm32"
+	}
+
+	partition fsbl2 {
+		image = "u-boot-spl.stm32"
+	}
+
+	partition ssbl {
+		image = "u-boot.img"
+	}
+
+	partition rootfs {
+		image = "rootfs.ext4"
+		partition-type = 0x83
+		bootable = "yes"
+		size = 256M
+	}
+}

board/stmicroelectronics/stm32mp157c-dk2/linux.config

@@ -0,0 +1,182 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_USELIB=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_PREEMPT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_ARCH_STM32=y
+CONFIG_ARM_THUMBEE=y
+# CONFIG_CACHE_L2X0 is not set
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_ARM_ERRATA_720789=y
+CONFIG_ARM_ERRATA_754322=y
+CONFIG_ARM_ERRATA_754327=y
+CONFIG_ARM_ERRATA_764369=y
+CONFIG_ARM_ERRATA_775420=y
+CONFIG_ARM_ERRATA_798181=y
+CONFIG_SMP=y
+CONFIG_MCPM=y
+CONFIG_HIGHMEM=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+CONFIG_SECCOMP=y
+# CONFIG_ATAGS is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+CONFIG_KERNEL_MODE_NEON=y
+CONFIG_ARM_CRYPTO=y
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_CMDLINE_PARTITION=y
+CONFIG_CMA=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CAN=y
+CONFIG_CAN_M_CAN=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_DMA_CMA=y
+CONFIG_CMA_SIZE_MBYTES=128
+CONFIG_SIMPLE_PM_BUS=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_STM32_FMC2=y
+CONFIG_MTD_SPI_NOR=y
+# CONFIG_MTD_SPI_NOR_USE_4K_SECTORS is not set
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_SRAM=y
+CONFIG_EEPROM_AT24=y
+CONFIG_NETDEVICES=y
+CONFIG_VIRTIO_NET=y
+CONFIG_KS8851=y
+CONFIG_SMSC911X=y
+CONFIG_STMMAC_ETH=y
+CONFIG_DWMAC_DWC_QOS_ETH=y
+CONFIG_MDIO_BITBANG=y
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_EDT_FT5X06=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_STPMIC1_ONKEY=y
+CONFIG_SERIAL_STM32=y
+CONFIG_SERIAL_STM32_CONSOLE=y
+CONFIG_SERIAL_DEV_BUS=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MUX=y
+CONFIG_I2C_STM32F7=y
+CONFIG_SPI=y
+CONFIG_SPI_STM32=y
+CONFIG_SPI_STM32_QSPI=y
+CONFIG_PINCTRL_SINGLE=y
+CONFIG_PINCTRL_STMFX=y
+CONFIG_POWER_RESET=y
+CONFIG_POWER_RESET_GPIO=y
+CONFIG_POWER_RESET_GPIO_RESTART=y
+CONFIG_POWER_RESET_SYSCON=y
+CONFIG_POWER_RESET_SYSCON_POWEROFF=y
+CONFIG_SYSCON_REBOOT_MODE=y
+CONFIG_WATCHDOG=y
+CONFIG_STPMIC1_WATCHDOG=y
+CONFIG_MFD_STM32_LPTIMER=y
+CONFIG_MFD_STPMIC1=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_STM32_VREFBUF=y
+CONFIG_REGULATOR_STM32_PWR=y
+CONFIG_REGULATOR_STPMIC1=y
+CONFIG_DRM=y
+CONFIG_DRM_STM=y
+CONFIG_DRM_STM_DSI=y
+CONFIG_DRM_PANEL_ORISETECH_OTM8009A=y
+CONFIG_DRM_SII902X=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_DYNAMIC_MINORS=y
+CONFIG_USB=y
+CONFIG_USB_OTG=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_USB_XHCI_PLATFORM=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_HCD_PLATFORM=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PLATFORM=y
+CONFIG_USB_DWC2=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_ISP1760=y
+CONFIG_USB_HSIC_USB3503=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ISP1301=y
+CONFIG_USB_ULPI=y
+CONFIG_TYPEC=y
+CONFIG_TYPEC_STUSB=y
+CONFIG_MMC=y
+CONFIG_MMC_BLOCK_MINORS=16
+CONFIG_MMC_ARMMMCI=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_DW=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_PWM=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STM32=y
+CONFIG_DMADEVICES=y
+CONFIG_STM32_DMA=y
+CONFIG_STM32_DMAMUX=y
+CONFIG_STM32_MDMA=y
+CONFIG_HWSPINLOCK=y
+CONFIG_HWSPINLOCK_STM32=y
+CONFIG_STM32_IPCC=y
+CONFIG_REMOTEPROC=y
+CONFIG_STM32_RPROC=y
+CONFIG_RPMSG_VIRTIO=y
+CONFIG_RPMSG_TTY=y
+CONFIG_IIO=y
+CONFIG_IIO_SW_TRIGGER=y
+CONFIG_SD_ADC_MODULATOR=y
+CONFIG_STM32_ADC_CORE=y
+CONFIG_STM32_ADC=y
+CONFIG_STM32_ADC_TEMP=y
+CONFIG_STM32_DFSDM_ADC=y
+CONFIG_STM32_LPTIMER_CNT=y
+CONFIG_STM32_DAC=y
+CONFIG_IIO_HRTIMER_TRIGGER=y
+CONFIG_IIO_STM32_LPTIMER_TRIGGER=y
+CONFIG_PWM=y
+CONFIG_PWM_STM32=y
+CONFIG_PWM_STM32_LP=y
+CONFIG_PHY_STM32_USBPHYC=y
+CONFIG_NVMEM_STM32_ROMEM=y
+CONFIG_EXT4_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_PRINTK_TIME=y

board/stmicroelectronics/stm32mp157c-dk2/overlay/boot/extlinux/extlinux.conf

@@ -0,0 +1,4 @@
+label stm32mp157c-dk2-buildroot
+  kernel /boot/zImage
+  devicetree /boot/stm32mp157c-dk2.dtb
+  append root=/dev/mmcblk0p4 rootwait

board/stmicroelectronics/stm32mp157c-dk2/readme.txt

@@ -0,0 +1,38 @@
+STM32MP157C Discovery Kit v2
+
+Intro
+=====
+
+This configuration supports the STM32MP157C Discovery Kit 2 (DK2)
+platform:
+
+  https://www.st.com/en/evaluation-tools/stm32mp157c-dk2.html
+
+How to build
+============
+
+ $ make stm32mp157c_dk2_defconfig
+ $ make
+
+How to write the microSD card
+=============================
+
+Once the build process is finished you will have an image called
+"sdcard.img" in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an microSD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Boot the board
+==============
+
+ (1) Insert the microSD card in connector CN15
+
+ (2) Plug a micro-USB cable in connector CN11 and run your serial
+     communication program on /dev/ttyACM0.
+
+ (3) Plug a USB-C cable in CN6 to power-up the board.
+
+ (4) The system will start, with the console on UART, but also visible
+     on the screen.

board/stmicroelectronics/stm32mp157c-dk2/uboot-fragment.config

@@ -0,0 +1 @@
+# CONFIG_STM32MP_WATCHDOG is not set

board/wandboard/post-image.sh

@@ -1,15 +0,0 @@
-#!/usr/bin/env bash
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage \
-  --rootpath "${TARGET_DIR}" \
-  --tmppath "${GENIMAGE_TMP}" \
-  --inputpath "${BINARIES_DIR}" \
-  --outputpath "${BINARIES_DIR}" \
-  --config "${GENIMAGE_CFG}"
-

boot/Config.in

@@ -15,7 +15,6 @@ source "boot/mv-ddr-marvell/Config.in"
 source "boot/mxs-bootlets/Config.in"
 source "boot/optee-os/Config.in"
 source "boot/opensbi/Config.in"
-source "boot/riscv-pk/Config.in"
 source "boot/s500-bootloader/Config.in"
 source "boot/shim/Config.in"
 source "boot/syslinux/Config.in"

boot/afboot-stm32/0001-Use-ld-instead-of-gcc-for-linking.patch

@@ -1,61 +0,0 @@
-From 0d581abe6620ac69adec321b94390e009802f36a Mon Sep 17 00:00:00 2001
-From: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-Date: Sun, 13 Mar 2016 14:32:33 +0100
-Subject: [PATCH] Use ld instead of gcc for linking
-
-Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
----
- Makefile | 11 ++++++-----
- 1 file changed, 6 insertions(+), 5 deletions(-)
-
-diff --git a/Makefile b/Makefile
-index ce40314..271bb4f 100644
---- a/Makefile
-+++ b/Makefile
-@@ -1,6 +1,7 @@
- CROSS_COMPILE ?= arm-none-eabi-
- 
- CC = $(CROSS_COMPILE)gcc
-+LD = $(CROSS_COMPILE)ld
- OBJCOPY = $(CROSS_COMPILE)objcopy
- OBJDUMP = $(CROSS_COMPILE)objdump
- SIZE = $(CROSS_COMPILE)size
-@@ -10,7 +11,7 @@ OPENOCD = openocd
- CFLAGS := -mthumb -mcpu=cortex-m4
- CFLAGS += -ffunction-sections -fdata-sections
- CFLAGS += -Os -std=gnu99 -Wall
--LDFLAGS := -nostartfiles -Wl,--gc-sections
-+LINKERFLAGS := -nostartfiles --gc-sections
- 
- obj-y += gpio.o mpu.o
- obj-f4 += $(obj-y) usart-f4.o
-@@ -22,22 +23,22 @@ all: stm32f429i-disco stm32429i-eval stm32f469i-disco stm32746g-eval
- 	$(CC) -c $(CFLAGS) $< -o $@
- 
- stm32f429i-disco: stm32f429i-disco.o $(obj-f4)
--	$(CC) -T stm32f429.lds $(LDFLAGS) -o stm32f429i-disco.elf stm32f429i-disco.o $(obj-f4)
-+	$(LD) -T stm32f429.lds $(LINKERFLAGS) -o stm32f429i-disco.elf stm32f429i-disco.o $(obj-f4)
- 	$(OBJCOPY) -Obinary stm32f429i-disco.elf stm32f429i-disco.bin
- 	$(SIZE) stm32f429i-disco.elf
- 
- stm32429i-eval: stm32429i-eval.o $(obj-f4)
--	$(CC) -T stm32f429.lds $(LDFLAGS) -o stm32429i-eval.elf stm32429i-eval.o $(obj-f4)
-+	$(LD) -T stm32f429.lds $(LINKERFLAGS) -o stm32429i-eval.elf stm32429i-eval.o $(obj-f4)
- 	$(OBJCOPY) -Obinary stm32429i-eval.elf stm32429i-eval.bin
- 	$(SIZE) stm32429i-eval.elf
- 
- stm32f469i-disco: stm32f469i-disco.o $(obj-f4)
--	$(CC) -T stm32f429.lds $(LDFLAGS) -o stm32f469i-disco.elf stm32f469i-disco.o $(obj-f4)
-+	$(LD) -T stm32f429.lds $(LINKERFLAGS) -o stm32f469i-disco.elf stm32f469i-disco.o $(obj-f4)
- 	$(OBJCOPY) -Obinary stm32f469i-disco.elf stm32f469i-disco.bin
- 	$(SIZE) stm32f469i-disco.elf
- 
- stm32746g-eval: stm32746g-eval.o $(obj-f7)
--	$(CC) -T stm32f429.lds $(LDFLAGS) -o stm32746g-eval.elf stm32746g-eval.o $(obj-f7)
-+	$(LD) -T stm32f429.lds $(LINKERFLAGS) -o stm32746g-eval.elf stm32746g-eval.o $(obj-f7)
- 	$(OBJCOPY) -Obinary stm32746g-eval.elf stm32746g-eval.bin
- 	$(SIZE) stm32746g-eval.elf
- 
--- 
-2.6.4
-

boot/afboot-stm32/afboot-stm32.hash

@@ -1,2 +1,2 @@
 # Locally calculated
-sha256 dbd715c8b99f7d266f74a04707a4dac76b75b31321f24dee5256a6348260530c  afboot-stm32-0.1.tar.gz
+sha256 9b37b661bd3091ceb5d8dc5a56a2dfc02ae9ebc0c63dad3c4289c9d6b3d3ec89  afboot-stm32-0.2.tar.gz

boot/afboot-stm32/afboot-stm32.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-AFBOOT_STM32_VERSION = 0.1
+AFBOOT_STM32_VERSION = 0.2
 AFBOOT_STM32_SITE = $(call github,mcoquelin-stm32,afboot-stm32,v$(AFBOOT_STM32_VERSION))
 AFBOOT_STM32_INSTALL_IMAGES = YES
 AFBOOT_STM32_INSTALL_TARGET = NO

boot/arm-trusted-firmware/Config.in

@@ -124,6 +124,24 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
 	  gets built before ATF, and that the appropriate BL33
 	  variable pointing to u-boot.bin is passed when building ATF.
 
+if BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33
+
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE
+	string "U-Boot BL33 image name"
+	default "u-boot.bin"
+	help
+	  Name of the U-Boot BL33 image to include in ATF, it must
+	  have been installed to BINARIES_DIR by the U-Boot package.
+
+endif
+
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS
+	string "Additional ATF make targets"
+	help
+	  Additional targets for the ATF build
+	  E.G. When using the QorIQ custom ATF repository from NXP,
+	  the target 'pbl' can be used to build the pbl binary.
+
 config BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES
 	string "Additional ATF build variables"
 	help
@@ -135,4 +153,18 @@ config BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG
 	help
 	  Enable this option to build ATF with DEBUG=1.
 
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES
+	string "Binary boot images"
+	default "*.bin"
+	help
+	  Names of generated image files that are installed in the
+	  output images/ directory.
+
+config BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC
+	bool "Needs dtc"
+	select BR2_PACKAGE_HOST_DTC
+	help
+	  Select this option if your ATF board configuration
+	  requires the Device Tree compiler to be available.
+
 endif

boot/arm-trusted-firmware/arm-trusted-firmware.mk

@@ -29,6 +29,10 @@ endif
 
 ARM_TRUSTED_FIRMWARE_INSTALL_IMAGES = YES
 
+ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC),y)
+ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-dtc
+endif
+
 ARM_TRUSTED_FIRMWARE_PLATFORM = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_PLATFORM))
 
 ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_DEBUG),y)
@@ -70,7 +74,8 @@ endif
 endif # BR2_TARGET_ARM_TRUSTED_FIRMWARE_BL32_OPTEE
 
 ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_AS_BL33),y)
-ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/u-boot.bin
+ARM_TRUSTED_FIRMWARE_UBOOT_BIN = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_UBOOT_BL33_IMAGE))
+ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BL33=$(BINARIES_DIR)/$(ARM_TRUSTED_FIRMWARE_UBOOT_BIN)
 ARM_TRUSTED_FIRMWARE_DEPENDENCIES += uboot
 endif
 
@@ -138,6 +143,9 @@ define ARM_TRUSTED_FIRMWARE_BL31_UBOOT_INSTALL_ELF
 endef
 endif
 
+ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += \
+	$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_TARGETS))
+
 define ARM_TRUSTED_FIRMWARE_BUILD_CMDS
 	$(ARM_TRUSTED_FIRMWARE_BUILD_FIPTOOL)
 	$(TARGET_MAKE_ENV) $(MAKE) -C $(@D) $(ARM_TRUSTED_FIRMWARE_MAKE_OPTS) \
@@ -146,7 +154,9 @@ define ARM_TRUSTED_FIRMWARE_BUILD_CMDS
 endef
 
 define ARM_TRUSTED_FIRMWARE_INSTALL_IMAGES_CMDS
-	cp -dpf $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/*.bin $(BINARIES_DIR)/
+	$(foreach f,$(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_IMAGES)), \
+		cp -dpf $(ARM_TRUSTED_FIRMWARE_IMG_DIR)/$(f) $(BINARIES_DIR)/
+	)
 	$(ARM_TRUSTED_FIRMWARE_BL31_UBOOT_INSTALL)
 	$(ARM_TRUSTED_FIRMWARE_BL31_UBOOT_INSTALL_ELF)
 endef

boot/at91bootstrap3/Config.in

@@ -19,7 +19,7 @@ choice
 	prompt "AT91 Bootstrap 3 version"
 
 config BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION
-	bool "3.8.13"
+	bool "3.9.0"
 
 config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT
 	bool "Custom Git repository"
@@ -27,8 +27,15 @@ config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT
 	  This option allows Buildroot to get the AT91 Bootstrap 3
 	  source code from a Git repository.
 
+config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL
+	bool "Custom tarball"
+
 endchoice
 
+config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION
+	string "URL of custom AT91Bootstrap tarball"
+	depends on BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL
+
 if BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT
 
 config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL
@@ -44,9 +51,10 @@ endif
 
 config BR2_TARGET_AT91BOOTSTRAP3_VERSION
 	string
-	default "v3.8.13" if BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION
+	default "v3.9.0" if BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION
 	default BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_VERSION \
 		if BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT
+	default "custom"	if BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL
 
 config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR
 	string "custom patch dir"

boot/at91bootstrap3/at91bootstrap3.hash

@@ -1,2 +1,3 @@
 # Locally calculated
-sha256	a5a10579598d47475696fab56c086225b0f4b710299e2dc9e0f9b6f72ed98be8  at91bootstrap3-v3.8.13.tar.gz
+sha256	e23e6df23b79ca81e412cb73a1f48bd95df8d46c7d52a1d073c2ed9d4f3a1a71  at91bootstrap3-v3.9.0.tar.gz
+sha256  732b2a55b5905031d8ae420136ffb5f8889214865784386bf754cffab8d2bc6e  main.c

boot/at91bootstrap3/at91bootstrap3.mk

@@ -6,7 +6,12 @@
 
 AT91BOOTSTRAP3_VERSION = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_VERSION))
 
-ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT),y)
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL),y)
+AT91BOOTSTRAP3_TARBALL = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION))
+AT91BOOTSTRAP3_SITE = $(patsubst %/,%,$(dir $(AT91BOOTSTRAP3_TARBALL)))
+AT91BOOTSTRAP3_SOURCE = $(notdir $(AT91BOOTSTRAP3_TARBALL))
+BR_NO_CHECK_HASH_FOR += $(AT91BOOTSTRAP3_SOURCE)
+else ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_GIT),y)
 AT91BOOTSTRAP3_SITE = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_REPO_URL))
 AT91BOOTSTRAP3_SITE_METHOD = git
 BR_NO_CHECK_HASH_FOR += $(AT91BOOTSTRAP3_SOURCE)
@@ -15,7 +20,9 @@ AT91BOOTSTRAP3_SITE = $(call github,linux4sam,at91bootstrap,$(AT91BOOTSTRAP3_VER
 endif
 
 AT91BOOTSTRAP3_LICENSE = Atmel License
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_LATEST_VERSION),y)
 AT91BOOTSTRAP3_LICENSE_FILES = main.c
+endif
 
 AT91BOOTSTRAP3_INSTALL_IMAGES = YES
 AT91BOOTSTRAP3_INSTALL_TARGET = NO
@@ -78,6 +85,12 @@ $(error No custom at91bootstrap3 repository version specified. Check your BR2_TA
 endif
 endif
 
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL),y)
+ifeq ($(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION)),)
+$(error No custom AT91Bootstrap3 tarball specified. Check your BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION setting)
+endif # qstrip BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL_LOCATION
+endif # BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_TARBALL
+
 endif # BR_BUILDING
 
 $(eval $(kconfig-package))

boot/barebox/Config.in

@@ -12,7 +12,7 @@ choice
 	  Select the specific Barebox version you want to use
 
 config BR2_TARGET_BAREBOX_LATEST_VERSION
-	bool "2019.07.0"
+	bool "2020.01.0"
 
 config BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	bool "Custom version"
@@ -40,7 +40,7 @@ endif
 
 config BR2_TARGET_BAREBOX_VERSION
 	string
-	default "2019.07.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
+	default "2020.01.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
 	default BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE if BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
 	default BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT

boot/barebox/barebox.hash

@@ -1,5 +1,8 @@
-# From https://www.barebox.org/download/barebox-2019.07.0.tar.bz2.md5
-md5 8fb8e8ec3775228c34f7de2096872f51 barebox-2019.07.0.tar.bz2
+# From https://www.barebox.org/download/barebox-2020.01.0.tar.bz2.md5
+md5  05038e0b61b68ce40e038295b809c548  barebox-2020.01.0.tar.bz2
 
 # Locally calculated
-sha256 8512ac1b91ef48f8b657fad446edc868eb7da30e93d6ff7854f0006854b6a3a6 barebox-2019.07.0.tar.bz2
+sha256  8968e6b0d72d79eba636917b067b925e3bbb54d38c6c2acfc4e1e49909b42f33  barebox-2020.01.0.tar.bz2
+
+# License files, locally computed
+sha256  ab1122aa9f9073ad1ec824edcd970b16a6a7881a34a18fd56c080debb2dca5d4  COPYING

boot/barebox/barebox.mk

@@ -25,15 +25,23 @@ $(1)_SOURCE = $$(notdir $$($(1)_TARBALL))
 else ifeq ($$(BR2_TARGET_BAREBOX_CUSTOM_GIT),y)
 $(1)_SITE = $$(call qstrip,$$(BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL))
 $(1)_SITE_METHOD = git
+# Override the default value of _SOURCE to 'barebox-*' so that it is not
+# downloaded a second time for barebox-aux; also alows avoiding the hash
+# check:
+$(1)_SOURCE = barebox-$$($(1)_VERSION).tar.gz
 else
 # Handle stable official Barebox versions
 $(1)_SOURCE = barebox-$$($(1)_VERSION).tar.bz2
 $(1)_SITE = https://www.barebox.org/download
 endif
 
+$(1)_DL_SUBDIR = barebox
+
 $(1)_DEPENDENCIES = host-lzop
 $(1)_LICENSE = GPL-2.0 with exceptions
+ifeq ($(BR2_TARGET_BAREBOX_LATEST_VERSION),y)
 $(1)_LICENSE_FILES = COPYING
+endif
 
 $(1)_CUSTOM_EMBEDDED_ENV_PATH = $$(call qstrip,$$(BR2_TARGET_$(1)_CUSTOM_EMBEDDED_ENV_PATH))
 

boot/binaries-marvell/Config.in

@@ -7,26 +7,6 @@ config BR2_TARGET_BINARIES_MARVELL
 	  reset and system control. ATF Boot Loader stage 2 (BL2) loads
 	  optional SCP_BL2 image into a platform-specific region
 	  of secure memory. This package downloads and installs such
-	  firmwares, which are needed to build ATF.
+	  firmware, which is needed to build ATF.
 
 	  https://github.com/MarvellEmbeddedProcessors/binaries-marvell/
-
-if BR2_TARGET_BINARIES_MARVELL
-
-choice
-	prompt "Marvell Armada platform"
-
-config BR2_TARGET_BINARIES_MARVELL_7040
-	bool "7040"
-
-config BR2_TARGET_BINARIES_MARVELL_8040
-	bool "8040"
-
-endchoice
-
-config BR2_TARGET_BINARIES_MARVELL_IMAGE
-	string
-	default "mrvl_scp_bl2_mss_ap_cp1_a8040.img" if BR2_TARGET_BINARIES_MARVELL_8040
-	default "mrvl_scp_bl2_mss_ap_cp1_a7040.img" if BR2_TARGET_BINARIES_MARVELL_7040
-
-endif

boot/binaries-marvell/binaries-marvell.hash

@@ -1,3 +1,3 @@
 # Locally calculated
-sha256 45c348d7a62fd147e7c6a59211a77876ce5dd26de690bd45ab79c8ff891acedf binaries-marvell-14481806e699dcc6f7025dbe3e46cf26bb787791.tar.gz
-sha256 509a36bb6faa106bbc9730c23038a361ee0c860e53a4cdf9e8605c0174fe45f7	README.md
+sha256 d818c95bcd4d5c026238d6e554151184ed7fea15bce1f861f9068b97b4cd320a binaries-marvell-c5d3ef2b63ba66d8717ecbe679fd2e639cde88ee.tar.gz
+sha256 e6d08ef60068ee72c68835001a24eb832dcba27cac0dde0f179dfb428be050ca README.md

boot/binaries-marvell/binaries-marvell.mk

@@ -4,18 +4,17 @@
 #
 ################################################################################
 
-# This is version binaries-marvell-armada-18.06
-BINARIES_MARVELL_VERSION = 14481806e699dcc6f7025dbe3e46cf26bb787791
+# This is version binaries-marvell-armada-18.12
+BINARIES_MARVELL_VERSION = c5d3ef2b63ba66d8717ecbe679fd2e639cde88ee
 BINARIES_MARVELL_SITE = $(call github,MarvellEmbeddedProcessors,binaries-marvell,$(BINARIES_MARVELL_VERSION))
 
 BINARIES_MARVELL_LICENSE = GPL-2.0 with freertos-exception-2.0
 BINARIES_MARVELL_LICENSE_FILES = README.md
 
-BINARIES_MARVELL_IMAGE = $(call qstrip,$(BR2_TARGET_BINARIES_MARVELL_IMAGE))
 BINARIES_MARVELL_INSTALL_IMAGES  = YES
 
 define BINARIES_MARVELL_INSTALL_IMAGES_CMDS
-	$(INSTALL) -D -m 0644 $(@D)/$(BINARIES_MARVELL_IMAGE) $(BINARIES_DIR)/scp-fw.bin
+	$(INSTALL) -D -m 0644 $(@D)/mrvl_scp_bl2.img $(BINARIES_DIR)/scp-fw.bin
 endef
 
 $(eval $(generic-package))

boot/boot-wrapper-aarch64/Config.in

@@ -38,4 +38,9 @@ config BR2_TARGET_BOOT_WRAPPER_AARCH64_PSCI
 	  Boot secondary SMP cores using PSCI firmware calls. If
 	  disabled, the spin-table method is used instead.
 
+config BR2_TARGET_BOOT_WRAPPER_AARCH64_GICV3
+	bool "Enable GICv3 instead of GICv2"
+	help
+	  Boot using GICv3 instead of GICv2.
+
 endif

boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-BOOT_WRAPPER_AARCH64_VERSION = 4266507a84f8c06452109d38e0350d4759740694
+BOOT_WRAPPER_AARCH64_VERSION = fd74c8cbd0e17483d2299208cad9742bee605ca7
 BOOT_WRAPPER_AARCH64_SITE = git://git.kernel.org/pub/scm/linux/kernel/git/mark/boot-wrapper-aarch64.git
 BOOT_WRAPPER_AARCH64_LICENSE = BSD-3-Clause
 BOOT_WRAPPER_AARCH64_LICENSE_FILES = LICENSE.txt
@@ -15,19 +15,11 @@ BOOT_WRAPPER_AARCH64_INSTALL_IMAGES = YES
 # Makefile.
 BOOT_WRAPPER_AARCH64_AUTORECONF = YES
 
-BOOT_WRAPPER_AARCH64_DTB = /arch/arm64/boot/dts/$(basename $(call qstrip,$(BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS))).dtb
-
-# Fixup the path to the DTB in configure.ac. In the future, this
-# should hopefully be made more configurable by the
-# boot-wrapper-aarch64 developers.
-define BOOT_WRAPPER_AARCH64_FIX_DTB_NAME
-	$(SED) 's%^KERN_DTB=.*%KERN_DTB=$(BOOT_WRAPPER_AARCH64_DTB)%' $(@D)/configure.ac
-endef
-
-BOOT_WRAPPER_AARCH64_PRE_PATCH_HOOKS += BOOT_WRAPPER_AARCH64_FIX_DTB_NAME
+BOOT_WRAPPER_AARCH64_DTB = $(LINUX_DIR)/arch/arm64/boot/dts/$(basename $(call qstrip,$(BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS))).dtb
 
 BOOT_WRAPPER_AARCH64_CONF_OPTS = \
 	--with-kernel-dir=$(LINUX_DIR) \
+	--with-dtb=$(BOOT_WRAPPER_AARCH64_DTB) \
 	--with-cmdline=$(BR2_TARGET_BOOT_WRAPPER_AARCH64_BOOTARGS)
 
 ifeq ($(BR2_TARGET_BOOT_WRAPPER_AARCH64_PSCI),y)
@@ -36,6 +28,10 @@ else
 BOOT_WRAPPER_AARCH64_CONF_OPTS += --disable-psci
 endif
 
+ifeq ($(BR2_TARGET_BOOT_WRAPPER_AARCH64_GICV3),y)
+BOOT_WRAPPER_AARCH64_CONF_OPTS += --enable-gicv3
+endif
+
 # We need to convince the configure script that the Linux kernel tree
 # exists, as well as the DTB and the kernel Image. Even though those
 # are available on the build machine, the configure script uses

boot/grub2/0001-x86-64-Treat-R_X86_64_PLT32-as-R_X86_64_PC32.patch

@@ -1,74 +0,0 @@
-From 842c390469e2c2e10b5aa36700324cd3bde25875 Mon Sep 17 00:00:00 2001
-From: "H.J. Lu" <hjl.tools@gmail.com>
-Date: Sat, 17 Feb 2018 06:47:28 -0800
-Subject: [PATCH] x86-64: Treat R_X86_64_PLT32 as R_X86_64_PC32
-
-Starting from binutils commit bd7ab16b4537788ad53521c45469a1bdae84ad4a:
-
-https://sourceware.org/git/?p=binutils-gdb.git;a=commit;h=bd7ab16b4537788ad53521c45469a1bdae84ad4a
-
-x86-64 assembler generates R_X86_64_PLT32, instead of R_X86_64_PC32, for
-32-bit PC-relative branches.  Grub2 should treat R_X86_64_PLT32 as
-R_X86_64_PC32.
-
-Signed-off-by: H.J. Lu <hjl.tools@gmail.com>
-Reviewed-by: Daniel Kiper <daniel.kiper@oracle.com>
-Signed-off-by: Romain Naour <romain.naour@smile.fr>
----
- grub-core/efiemu/i386/loadcore64.c | 1 +
- grub-core/kern/x86_64/dl.c         | 1 +
- util/grub-mkimagexx.c              | 1 +
- util/grub-module-verifier.c        | 1 +
- 4 files changed, 4 insertions(+)
-
-diff --git a/grub-core/efiemu/i386/loadcore64.c b/grub-core/efiemu/i386/loadcore64.c
-index e49d0b6..18facf4 100644
---- a/grub-core/efiemu/i386/loadcore64.c
-+++ b/grub-core/efiemu/i386/loadcore64.c
-@@ -98,6 +98,7 @@ grub_arch_efiemu_relocate_symbols64 (grub_efiemu_segment_t segs,
- 		    break;
- 
- 		  case R_X86_64_PC32:
-+		  case R_X86_64_PLT32:
- 		    err = grub_efiemu_write_value (addr,
- 						   *addr32 + rel->r_addend
- 						   + sym.off
-diff --git a/grub-core/kern/x86_64/dl.c b/grub-core/kern/x86_64/dl.c
-index 4406906..3a73e6e 100644
---- a/grub-core/kern/x86_64/dl.c
-+++ b/grub-core/kern/x86_64/dl.c
-@@ -70,6 +70,7 @@ grub_arch_dl_relocate_symbols (grub_dl_t mod, void *ehdr,
- 	  break;
- 
- 	case R_X86_64_PC32:
-+	case R_X86_64_PLT32:
- 	  {
- 	    grub_int64_t value;
- 	    value = ((grub_int32_t) *addr32) + rel->r_addend + sym->st_value -
-diff --git a/util/grub-mkimagexx.c b/util/grub-mkimagexx.c
-index a2bb054..39d7efb 100644
---- a/util/grub-mkimagexx.c
-+++ b/util/grub-mkimagexx.c
-@@ -841,6 +841,7 @@ SUFFIX (relocate_addresses) (Elf_Ehdr *e, Elf_Shdr *sections,
- 		  break;
- 
- 		case R_X86_64_PC32:
-+		case R_X86_64_PLT32:
- 		  {
- 		    grub_uint32_t *t32 = (grub_uint32_t *) target;
- 		    *t32 = grub_host_to_target64 (grub_target_to_host32 (*t32)
-diff --git a/util/grub-module-verifier.c b/util/grub-module-verifier.c
-index 9179285..a79271f 100644
---- a/util/grub-module-verifier.c
-+++ b/util/grub-module-verifier.c
-@@ -19,6 +19,7 @@ struct grub_module_verifier_arch archs[] = {
-       -1
-     }, (int[]){
-       R_X86_64_PC32,
-+      R_X86_64_PLT32,
-       -1
-     }
-   },
--- 
-2.7.4
-

boot/grub2/grub2.hash

@@ -1,2 +1,3 @@
 # Locally computed:
-sha256 810b3798d316394f94096ec2797909dbf23c858e48f7b3830826b8daa06b7b0f grub-2.02.tar.xz
+sha256 e5292496995ad42dabe843a0192cf2a2c502e7ffcc7479398232b10a472df77d grub-2.04.tar.xz
+sha256 8ceb4b9ee5adedde47b31e975c1d90c73ad27b6b165a1dcd80c7c545eb65b903 COPYING

boot/grub2/grub2.mk

@@ -4,7 +4,7 @@
 #
 ################################################################################
 
-GRUB2_VERSION = 2.02
+GRUB2_VERSION = 2.04
 GRUB2_SITE = http://ftp.gnu.org/gnu/grub
 GRUB2_SOURCE = grub-$(GRUB2_VERSION).tar.xz
 GRUB2_LICENSE = GPL-3.0+

boot/mv-ddr-marvell/mv-ddr-marvell.hash

@@ -1,2 +1,3 @@
 # Locally calculated
-sha256 9aaea1f5e8bf3c9d7e735f569d130b5c2ec773c43e0cfabc9b8dee32adbf7e4e mv-ddr-marvell-99d772547314f84921268d57e53d8769197d3e21.tar.gz
+sha256  39dcc8baccb82cbc746d8f82ce7f673e1b1236e8aee0d09e7ab12c27eeb6ecda  mv-ddr-marvell-618dadd1491eb2f7b2fd74313c04f7accddae475.tar.gz
+sha256  69208236fc322026920b92d1d839ebdc521ca65379bfdb3368a24945e794fc78  ddr3_init.c

boot/mv-ddr-marvell/mv-ddr-marvell.mk

@@ -4,8 +4,8 @@
 #
 ################################################################################
 
-# This is the commit for mv_ddr-armada-18.09.2
-MV_DDR_MARVELL_VERSION = 99d772547314f84921268d57e53d8769197d3e21
+# This is the commit for mv_ddr-armada-18.12.0
+MV_DDR_MARVELL_VERSION = 618dadd1491eb2f7b2fd74313c04f7accddae475
 MV_DDR_MARVELL_SITE = $(call github,MarvellEmbeddedProcessors,mv-ddr-marvell,$(MV_DDR_MARVELL_VERSION))
 MV_DDR_MARVELL_LICENSE = GPL-2.0+ or LGPL-2.1 with freertos-exception-2.0, BSD-3-Clause, Marvell Commercial
 MV_DDR_MARVELL_LICENSE_FILES = ddr3_init.c

boot/opensbi/0001-Makefile-Don-t-specify-mabi-or-march.patch

@@ -0,0 +1,37 @@
+From f5871e1f3650d6c8a032928cb5d8ca00c275c377 Mon Sep 17 00:00:00 2001
+From: Alistair Francis <alistair.francis@wdc.com>
+Date: Fri, 15 Feb 2019 14:57:41 -0800
+Subject: [PATCH] Makefile: Don't specify mabi or march
+
+To avoid
+    can't link double-float modules with soft-float modules
+errors when building 32-bit openSBI don't specify mabi or march.
+
+Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
+---
+ Makefile | 2 --
+ 1 file changed, 2 deletions(-)
+
+diff --git a/Makefile b/Makefile
+index ae68f55..10851fc 100644
+--- a/Makefile
++++ b/Makefile
+@@ -145,7 +145,6 @@ GENFLAGS	+=	$(firmware-genflags-y)
+ CFLAGS		=	-g -Wall -Werror -nostdlib -fno-strict-aliasing -O2
+ CFLAGS		+=	-fno-omit-frame-pointer -fno-optimize-sibling-calls
+ CFLAGS		+=	-mno-save-restore -mstrict-align
+-CFLAGS		+=	-mabi=$(PLATFORM_RISCV_ABI) -march=$(PLATFORM_RISCV_ISA)
+ CFLAGS		+=	-mcmodel=$(PLATFORM_RISCV_CODE_MODEL)
+ CFLAGS		+=	$(GENFLAGS)
+ CFLAGS		+=	$(platform-cflags-y)
+@@ -158,7 +157,6 @@ CPPFLAGS	+=	$(firmware-cppflags-y)
+ ASFLAGS		=	-g -Wall -nostdlib -D__ASSEMBLY__
+ ASFLAGS		+=	-fno-omit-frame-pointer -fno-optimize-sibling-calls
+ ASFLAGS		+=	-mno-save-restore -mstrict-align
+-ASFLAGS		+=	-mabi=$(PLATFORM_RISCV_ABI) -march=$(PLATFORM_RISCV_ISA)
+ ASFLAGS		+=	-mcmodel=$(PLATFORM_RISCV_CODE_MODEL)
+ ASFLAGS		+=	$(GENFLAGS)
+ ASFLAGS		+=	$(platform-asflags-y)
+-- 
+2.20.1
+

boot/opensbi/opensbi.hash

@@ -1,2 +1,3 @@
 # locally computed
-sha256 d3060bf51af00204ce90fc73106955c694463b59a5b81be64cf780cd32743abf opensbi-0.4.tar.gz
+sha256 bc82f1e63663cafb7976b324d8a01263510cfd816063dc89e0ccffb9763fb1dd opensbi-0.5.tar.gz
+sha256 82d13fb1bf6bb162629deeea9eb9c117e74548d3b707e478967691fe79a68e21 COPYING.BSD