This issue only applies to kernels built with CONFIG_THUMB2=y, so reword the
comment to make that more clear.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f13477b (linux: config.in: add comment for Arm Cortex-M) added a
comment so that the user that the linux kernel may miscompile with
binutils 2.29+, when the target is an armv7m CPU.
However, the real trigger is a compilation in thumb2 mode, which happens
to be the only option for armv7m CPUs.
We can't know whether the kernel will be built in arm or thumb2 mode,
though, because we do not have that information: it is only available in
the Linux' .config file, which we don;t have access to at the time we
run our menuconfig.
So, relax the conditions under which the comment is made, so that it
appears as soon as binutils are >= 2.29 (i.e. not 2.28, which is the
oldest we support) for ARM CPUs.
[Peter: reword comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Laurent GONZALEZ <br22@gezedo.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 17f352ac (package/binutils: default to 2.29 for Cortex-M targets)
made the default version 2.28 (and not 2.29!) when the target is an
arm-v7m CPU.
However, the real trigger is compilation in Thumb mode, not the fact
that the target is v7m.
The fact that it was noticed on a v7m target is because Thumb is the
only mode valid on those CPUs.
Tighten the defaults to 2.28 for Thumb and Thumb2 modes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Laurent GONZALEZ <br22@gezedo.com>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following error when trying to execute clang compiler
(host-variant):
CommandLine Error: Option 'x86-use-base-pointer' registered more than once!
LLVM ERROR: inconsistency in registered CommandLine options
The same happens for the other binaries, such as clang-format:
./clang-format
: CommandLine Error: Option 'help-list' registered more than once!
LLVM ERROR: inconsistency in registered CommandLine options
Clang binaries are tools, and given that DLLVM_LINK_LLVM_DYLIB is set,
they are linked against libLLVM.so. The problem is that binaries are
also linking against some LLVM static libraries, resulting in the error
shown above. However, it is not the same case for libclang, which is also
a tool but links only against libLLVM.so.
To fix this problem, add LLVM_DYLIB_COMPONENTS=all.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since all cyclone5 development changes are upstream, change over to an
upstream release of the Linux kernel and u-boot for buildroot.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ef94c736ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 12049cc8b8.
Now that the binutils default has been changed for ARMv7M, this is no longer
needed.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit cbe43fd417.
Now that the binutils default has been changed for ARMv7M, this is no longer
needed.
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils 2.29 changed the implementation of adr pseudo instruction
it breaks linux kernel and impacts Cortex-M targets (eg. stm32)
[Peter: simplify Config.in logic, adjust message to make it clear this is
just a default]
Signed-off-by: Laurent GONZALEZ <br22@gezedo.com>
Signed-off-by: Christophe Priouzeau <christophe.priouzeau@st.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 4.10.1 version brings a large number of fixes:
https://www.xenproject.org/downloads/xen-archives/xen-project-410-series/xen-4101.html
Including a number of security fixes:
XSA-252: DoS via non-preemptable L3/L4 pagetable freeing (CVE-2018-7540)
XSA-253: x86: memory leak with MSR emulation (CVE-2018-5244)
XSA-254: Information leak via side effects of speculative execution
(CVE-2017-5753 CVE-2017-5715 CVE-2017-5754)
XSA-255: grant table v2 -> v1 transition may crash Xen (CVE-2018-7541)
XSA-256: x86 PVH guest without LAPIC may DoS the host (CVE-2018-7542)
XSA-258: Information leak via crafted user-supplied CDROM (CVE-2018-10472)
XSA-259: x86: PV guest may crash Xen with XPTI (CVE-2018-10471)
Also add a hash for the license file while we are at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Forward port of security fixes from the 2.13.7 release. The 2.13.7
release notes say this:
* Submodule "names" come from the untrusted .gitmodules file, but we
blindly append them to $GIT_DIR/modules to create our on-disk repo
paths. This means you can do bad things by putting "../" into the
name. We now enforce some rules for submodule names which will cause
Git to ignore these malicious names (CVE-2018-11235).
Credit for finding this vulnerability and the proof of concept from
which the test script was adapted goes to Etienne Stalmans.
* It was possible to trick the code that sanity-checks paths on NTFS
into reading random piece of memory (CVE-2018-11233).
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed issues are listed in the 2.27 branch NEWS file:
CVE-2017-18269: An SSE2-based memmove implementation for the i386
architecture could corrupt memory. Reported by Max Horn.
CVE-2018-11236: Very long pathname arguments to realpath function could
result in an integer overflow and buffer overflow. Reported by Alexey
Izbyshev.
CVE-2018-11237: The mempcpy implementation for the Intel Xeon Phi
architecture could write beyond the target buffer, resulting in a buffer
overflow. Reported by Andreas Schwab.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f9cffb6af4 (binutils: replace hard-links with soft-links to fix
rpath) has a side effect that when we build for a noMMU target, elf2flt
will in turn replace some of the programs installed by binutils, with
its own wrappers.
For example, it will rename host/TUPLE/bin/ld to ld.real, and add its
own wrapper in place of the original. It does the same for
host/bin/TUPLE-ld and host/bin/TUPLE-ld.real.
However, we had already made ld a symlink to ../../bin/TUPLE-ld, so
host/TUPLE/bin/ld.real will still point to host/bin/TUPLE-ld when we
want it to point to ld.real instead...
This ultimately confuses gcc later on.
Of course, the culprit is also elf2flt, which also installs similar
hardlinks that would ultimately exhibit the same rpath issue as the
one fixed by f9cffb6af4. Note: we haven't had an issue so far with
that, because those tools installed by elf2flt only link with libz,
which is most often present on the host system. So, all seem well,
but is nonetheless broken; this will be fixed in a subsequent commit.
But back on topic. If we were to fix elf2flt with similar symlinks,
gcc still gets confused. The underlying reason for this confusion is
not entirely clear, though... It looks like something is trying to
dereference symlinks and gets confused by the result somehow...
So, in an attempt to restore some sanity in all this mess, we try to
restore the previous behaviour, we no longer use symlinks but just copy
the individual tools.
Fixes: #11031.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Christophe Priouzeau <christophe.priouzeau@st.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.03-rc2, which
includes significant changes since arc-2018.03-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7aaabe8fc0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#11046
Commit bb2a57a17a (fs: run packages' filesystem hooks in a copy of target/)
changed the file system logic to run file system hooks from packages on a
copy of TARGET_DIR, and finally use this copy as input for the file system
generation.
This copy was done with rsync, which by default does not preserve hard
links, leading to an expansion of the file system images when hard links are
present.
Fix it by passing the -H option to rsync (preserve hard links).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssh2 pkg-config file could contain the following lines when build
with a static version of mbedtls:
Libs: -L${libdir} -lssh2 /xxx/libmbedcrypto.a
Libs.private: /xxx/libmbedcrypto.a
This static mbedtls library must be used to correctly detect ssh2
support and this library must be copied in libcurl.pc otherwise
compilation of any application (such as upmpdcli) with libcurl will fail
when trying to find mbedtls functions included in libssh2.
So, replace pkg-config --libs-only-l by pkg-config --libs.
Fixes:
- http://autobuild.buildroot.net/results/43e24b22a77f616d6198c10435dcc23cc3b9088a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the patch adding local rpcgen. Instead use the host-nfs-utils
provided rpcgen. Update the patch "Automatically generate XDR header
files from .x sources using" to use external rpcgen.
Renumber the other patches.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We only need the host package for the rpcgen utility. glibc deprecated
this utility in version 2.26. Fedora has recently removed rpcgen from
its glibc package. So we need to build the rpcgen from the nfs-utils
package.
The removal of Sun RPC from glibc also removed RPC headers from glibc.
rpcgen needs two of these headers. Add host-libtirpc to provide the RPC
headers.
Tested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libtirpc host package is only for two headers that the host rpcgen
utility from the nfs-utils package needs to build. glibc used to provide
these headers. In version 2.26 glibc deprecated them with its bundled
Sun RPC. Recently Fedora stopped enabling Sun RPC in glibc. So we can no
longer rely on these headers being present on the host.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Resolves build failures like:
http://autobuild.buildroot.net/results/953/95307f0f56c7ead1bd1f0ab0049aeb8b30fdc11c/
libunistring to libicu conversion required modifications to
0001-mdrestore-do-not-do-dynamic-linking-of-libtool-libra.patch and
the libicu usage doesn't require the
0005-xfs_scrub-fix-cross-compile-with-libunistring.patch patch. I
verified that the configuration time setup of the LIBICU library
works correctly and doesn't require us to remove it.
Upstream has reworked/included the following:
0003-workqueue-add-missing-pthreads-header.patch
0004-xfs_scrub-add-missing-paths-header.patch
0006-xfs_scrub-fix-build-with-older-kernel-headers.patch
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'local' site method is easily confused with the 'file' site method,
making people create packages like this:
FOO_SITE_METHOD = local
FOO_SOURCE = foo.tar.gz
$(eval $(generic-package))
Due to the intricacies of the generic package infra, this does not
cause an error; instead, the foo.tar.gz tarball that happens to be
present in the download directory will be used. This behaviour differs
greatly from what is specified in the manual.
Instead, error out immediately if a package specifies the 'local' site
method but does not specify a _SITE.
We check for _OVERRIDE_SRCDIR rather than checking for _SITE, just
after _OVERRIDE_SRCDIR has been set to _SITE. Indeed, a package that
sets _OVERRIDE_SRCDIR but not _SITE currently works correctly. There is
no reason to make it fail.
See also
https://stackoverflow.com/questions/50364655/including-patches-to-build-root
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are moving from datacom.ind.br to datacom.com.br. The old domain will
still be valid for an undefined period (probably forever).
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This sets the protocol choice according to the program invocation name.
That is the common lrzsz installation practice.
Cc: Matthew Starr <mstarr@hedonline.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch.
This release fixes the issues listed below.
CVE-2018-1122: Local privilege escalation in top
CVE-2018-1123: Denial of service in ps
CVE-2018-1124: Local privilege escalation in libprocps
CVE-2018-1125: Stack buffer overflow in pgrep
CVE-2018-1126: Integer overflow in proc/alloc
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/5d9/5d9e299ff12726d07e8a584a213c1d2a2e419594/
The modem-manager build generates a number of build warnings like:
mm-base-manager.c: In function 'handle_set_logging':
mm-base-manager.c:680:15: error: assignment from incompatible pointer type [-Werror]
ctx->self = g_object_ref (manager);
Which cause a build failure because of -Werror. Pass
--disable-more-warnings to disable -Werror.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Options should be prefixed by BR2_PACKAGE_LIBMEDIAART and not
BR2_PACKAGE_MEDIAART, but package was using both prefixes.
This was found as default symbol was defined as
BR2_PACKAGE_LIBMEDIAART_BACKEND_NONE (correct prefix), but symbol
was actually BR2_PACKAGE_MEDIAART_BACKEND_NONE).
This commit therefore renames the incorrectly named options, and adds
Config.in.legacy handling. Since the options are part of a choice, the
legacy handling cannot select the new options, and is only here to
inform the user.
Fixes: c443830a57 libmediaart: new package
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
[Thomas: improve commit log, add Config.in.legacy handling]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sub-options of the ti-sgx-km package had their name option
prefixed by BR2_PACKAGE_TI_SGX, while the prefix should be
BR2_PACKAGE_TI_SGX_KM. This commit fixes that, and adds the necessary
Config.in.legacy handling.
Since those options are part of a choice, the legacy handling cannot
select the new name of the options, so the legacy handling only
informs the user of the rename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sub-options of the janus-gateway package had their name option
prefixed by BR2_PACKAGE_JANUS, while the prefix should be
BR2_PACKAGE_JANUS_GATEWAY. This commit fixes that, and adds the
necessary Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A number of options in the ipsec-tools package had their Config.in
option prefixed by BR2_PACKAGE_IPSEC, while the prefix should be
BR2_PACKAGE_IPSEC_TOOLS. This commit fixes that, and adds the
necessary Config.in.legacy handling.
Since those options are part of a choice, the legacy handling cannot
select the new name of the options, so the legacy handling only
informs the user of the rename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option name BR2_PACKAGE_LIBTFDI_CPP obviously had a typo: it
should have been named BR2_PACKAGE_LIBFTDI_CPP, and add the necessary
Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The choice options to select the specific jquery-ui theme to install
had a prefix of BR2_PACKAGE_JQUERY_UI_THEME_ instead of
BR2_PACKAGE_JQUERY_UI_THEMES_. This commit fixes that, and adds
Config.in.legacy handling. It's worth mentioning that since those
options are part of a choice, the legacy handling cannot select the
new name of the option: we can simply inform the user about the
renaming.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bluez5_utils Config.in options had a bogus prefix:
BR2_PACKAGE_BLUEZ5 instead of the expected
BR2_PACKAGE_BLUEZ5_UTILS. This commit fixes that, and adds the
appropriate Config.in.legacy handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-10536: An issue was discovered in WavPack 5.1.0 and earlier. The
WAV parser component contains a vulnerability that allows writing to memory
because ParseRiffHeaderConfig in riff.c does not reject multiple format
chunks.
CVE-2018-10537: An issue was discovered in WavPack 5.1.0 and earlier. The
W64 parser component contains a vulnerability that allows writing to memory
because ParseWave64HeaderConfig in wave64.c does not reject multiple format
chunks.
CVE-2018-10538: An issue was discovered in WavPack 5.1.0 and earlier for WAV
input. Out-of-bounds writes can occur because ParseRiffHeaderConfig in
riff.c does not validate the sizes of unknown chunks before attempting
memory allocation, related to a lack of integer-overflow protection within a
bytes_to_copy calculation and subsequent malloc call, leading to
insufficient memory allocation.
CVE-2018-10539: An issue was discovered in WavPack 5.1.0 and earlier for
DSDiff input. Out-of-bounds writes can occur because
ParseDsdiffHeaderConfig in dsdiff.c does not validate the sizes of unknown
chunks before attempting memory allocation, related to a lack of
integer-overflow protection within a bytes_to_copy calculation and
subsequent malloc call, leading to insufficient memory allocation.
CVE-2018-10540: An issue was discovered in WavPack 5.1.0 and earlier for W64
input. Out-of-bounds writes can occur because ParseWave64HeaderConfig in
wave64.c does not validate the sizes of unknown chunks before attempting
memory allocation, related to a lack of integer-overflow protection within a
bytes_to_copy calculation and subsequent malloc call, leading to
insufficient memory allocation.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_LTRACE option has some architecture dependencies, but
those architecture dependencies are not taken into account for the
Config.in comment.
To fix this, this commit introduces a BR2_PACKAGE_LTRACE_ARCH_SUPPORTS
hidden boolean that gets used by both the BR2_PACKAGE_LTRACE option
and the Config.in comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit dfaa18af00 ("ltrace: disable
on mips/mipsel"), ltrace was disabled on mips/mipsel due to build
issues, and a comment was added in the Config.in file to explain that
even though ltrace has mips/mipsel support, it isn't enabled because
it doesn't build.
Then, in commit d23cce19c2 ("ltrace:
enable for mips/mipsel"), the build of ltrace on mips/mipsel was
re-enabled, because it has been fixed upstream.
However, the comment in the Config.in comment was not removed in this
commit. Due to this, we have a comment that says "we don't allow
enabling ltrace on mips/mipsel" and the line right below precisely
allows to enable ltrace on mips/mipsel.
Fix this inconsistency by removing the no longer valid comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 6e223241e1 ("Add Transmission
package"), which added the transmission package, introduced a
BR2_PACKAGE_TRANSMISSION_REMOTE Config.in option, supposedly matching
the --enable-remote/--disable-remote transmission option.
However, transmission as of version 2.33 packaged by this initial
commit, did not have a --enable-remote/--disable-remote option, and it
was apparently never part of transmission.
Therefore, this commit removes this useless option. Since the
transmission-remote tool is automatically built when the daemon is
enabled, the Config.in.legacy handling selects
BR2_PACKAGE_TRANSMISSION_DAEMON.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0006-libsystemd.patch backports an upstream commit which renames
the systemd configure option.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extract from release announcement:
- (2.9, 2.7, 2.1) Fixed an issue in the X.509 module which could lead
to a buffer overread during certificate validation. Additionally, the
issue could also lead to unnecessary callback checks being made or to
some validation checks to be omitted. The overread could be triggered
remotely, while the other issues would require a non DER-compliant
certificate to be correctly signed by a trusted CA, or a trusted CA with
a non DER-compliant certificate. Found by luocm. Fixes#825.
- (2.9, 2.7, 2.1) Fixed the buffer length assertion in the
ssl_parse_certificate_request() function which could lead to an
arbitrary overread of the message buffer. The overreads could be caused
by receiving a malformed algorithms section which was too short. In
builds with debug output, this overread data was output with the debug
data.
- (2.9, 2.7, 2.1) Fixed a client-side bug in the validation of the
server's ciphersuite choice which could potentially lead to the client
accepting a ciphersuite it didn't offer or a ciphersuite that could not
be used with the TLS or DTLS version chosen by the server. This could
lead to corruption of internal data structures for some configurations.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update several of the licenses annotated in the gst1-plugins-bad.mk file.
1. Specify GPL-2.0 in license info.
* All of the *.[ch] that specify GPL also specify version 2 or later.
2. Remove GPL from audiovisualizers.
* Changlog notes move from GPL to LGPL. (2015-04-25)
* docs/plugins/inspect/plugin-audiovisualizers.xml claims "LGPL".
* All *.[ch] files under ./gst/audiovisualizers say "GNU Library General Public License".
3. Add GPL to yadif.
* Changelog notes that yadif is "GPL". (2013-02-07)
* docs/plugins/inspect/plugin-yadif.xml claims "GPL".
* All *.[ch] files under ./gst/yadif say "GNU General Public License" except for one "GNU Library General Public License".
4. Remove UNKNOWN from fdk_aac.
* docs/plugins/inspect/plugin-fdkaac.xml claims "LGPL".
* All *.[ch] files under ./ext/fdkaac say "GNU Lesser" or "GNU Library General Public License".
5. Add BSD-2c to dtls.
* docs/plugins/inspect/plugin-dtls.xml claims "BSD".
* All *.[ch] files under ./gst/dtls have BSD-2c text.
6. Add BSD-2c to openh264.
* Changelog notes that openh264 is "BSD-2". (2014-10-03)
* docs/plugins/inspect/plugin-openh264.xml claims "BSD".
* All *.[ch] files under ./ext/openh264 have BSD-2c text.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch, fixes [1]:
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp: In member function 'void QtWaylandClient::QWaylandXCompositeEGLWindow::createEglSurface()':
../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:124:82: error: invalid conversion from 'Window {aka long unsigned int}' to 'EGLNativeWindowType {aka void*}' [-fpermissive]
m_surface = eglCreateWindowSurface(m_glxIntegration->eglDisplay(), m_config, m_xWindow,0);
^~~~~~~~~
In file included from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglclientbufferintegration.h:57:0,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.h:46,
from ../../../hardwareintegration/client/xcomposite-egl/qwaylandxcompositeeglwindow.cpp:40:
.../host/arm-buildroot-linux-musleabihf/sysroot/usr/include/EGL/egl.h:265:31: note: initializing argument 3 of 'void* eglCreateWindowSurface(EGLDisplay, EGLConfig, EGLNativeWindowType, const EGLint*)'
EGLAPI EGLSurface EGLAPIENTRY eglCreateWindowSurface(EGLDisplay dpy, EGLConfig config,
[1] http://autobuild.buildroot.net/results/9bcc76ed9e23c0d525f20b4da7f3bb5efe3083d4
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The gdb configure script is given --enable-gdbserver when
BR2_PACKAGE_GDB_SERVER is set, but it is not given --disable-gdbserver
when BR2_PACKAGE_GDB_SERVER is unset.
gdb gdb/configure.ac defaults to enabling gdbserver in "native"
(host=target) cases, which is always the case when buildroot builds a
gdb which runs on the target hardware. The gdbserver will overwrite
BR2_TOOLCHAIN_EXTERNAL_GDB_SERVER_COPY gdbserver, if any.
Fix that by passing --disable-gdbserver when BR2_PACKAGE_GDB_SERVER is
unset.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux-nfs project switched to a new homepage. Update the help text
link.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
faketime currently doesn't build on host machines that use gcc 8.x due
to stricter checks done by gcc, and the fact that it is built with
-Werror.
As a simple stop-gap measure, this commit patches the faketime
Makefile to not use -Werror anymore.
The actual fixes for the gcc 8.x issues have been submitted upstream
at https://github.com/wolfcw/libfaketime/pull/161, but disabling
-Werror is a much smaller fix.
Also, it is worth mentioning that removing -Werror makes the existing
patch 0001-Disable-the-non-null-compare-warning-error.patch (which was
just disabling one specific warning). We nonetheless keep this patch
around as it is a backport from upstream.
Fixes:
http://autobuild.buildroot.net/results/bd223dfa1c4baa68e427d4941bd2e9917e22da84/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch.
This release fixes the security issues listed below.
CVE-2018-1000300: curl might overflow a heap based memory buffer when
closing down an FTP connection with very long server command replies.
https://curl.haxx.se/docs/adv_2018-82c2.html
CVE-2018-1000301: curl can be tricked into reading data beyond the end
of a heap based buffer used to store downloaded content.
https://curl.haxx.se/docs/adv_2018-b138.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Improve the documentation by adding the configuration of SW801 and SW802
switches for SD card boot.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The existing patch 0001-Build-buildconfig-for-the-host.patch changes
the exim build system to use the host compiler to build the
"buildconfig" program instead of the cross-compiler.
However, it still uses $(LIBS) which lists the target libraries to
link with, which shouldn't be used. Since buildconfig doesn't use any
library beyond the C library, we can simply drop using $(LIBS).
This will fix build failures of exim on Fedora 28, where libnsl is no
longer provided by the C library, causing build failures such as:
/usr/bin/gcc buildconfig.c
/usr/bin/ld: cannot find -lnsl
Fixes:
http://autobuild.buildroot.net/results/ac78fe18657558b3c12c03c08bf1081d7c06ca85/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kconfig uses either pkg-config or hard-coded /usr/include paths to find
the ncurses or ncursesw library. If ncursesw is found, it will include
<ncursesw.h>. Since Buildroot's host-ncurses doesn't install a .pc file,
and linux.mk anyway doesn't pass the pkg-config options to find the host
pkg-config files, Kconfig will always find the system's ncursesw.h.
However, since commit dde090c299 (linux: fix passing of host CFLAGS and
LDFLAGS) HOST_LDFLAGS is passed to the linux build system. Thus, if
host-ncurses was already built before 'make linux-menuconfig' is called,
the build will pick up libncurses from the host directory, which is NOT
widechar. Thus, two different ncurses configurations are mixed into the
final mconf program. This will result in serious breakage in the
rendering of the menus (lots of @ and question mark characters).
As a workaround (suggested by Yann), don't pass HOST_CFLAGS and
HOST_LDFLAGS when running kconfig commands. For kconfig, we should never
need host packages anyway. This way, the kconfig calls will always use
the system's ncurses and never our host-ncurses.
Note that the same problem could pop up for other kconfig packages as
well if we ever pass HOST_CFLAGS/HOST_LDFLAGS to them. We could force
HOSTCC=$(HOSTCC) directly in kconfig-package. However, for now there
are no other packages that exhibit this problem, so this can be
revisited when they do.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: David De Grave <david.degrave@essensium.com>
Cc: Scott Fan <fancp2007@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.0.2 is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
5.0.2 is API and ABI compatible with 5.0.0 and 5.0.1 and includes
mitigations for CVE-2017-5715 (Spectre Variant 2) for X86 and MIPS.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use "GST1_PLUGINS_BAD_LICENSE := $(GST1_PLUGINS_BAD_LICENSE), xxxx" construct
so that the list of licenses is presented as a comma-separated list.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When json-c is enabled but libcurl is disabled, clamav tries to build
the clamsubmit program, which fails with:
CC clamsubmit.o
clamsubmit.c:6:23: fatal error: curl/curl.h: No such file or directory
#include <curl/curl.h>
This is due to an incorrect curl-config detection logic, leading to
/bin/curl-config being present making the configure script believe
that curl is available, even when --without-libcurl is explicitly
passed.
This commit adds a patch, submitted upstream, which fixes this
problem.
Fixes:
http://autobuild.buildroot.net/results/c43d2ebd8ab30016969d642dbd71c297dc5f6bab/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If host-zstd builds when $(HOST_DIR)/include has not been created yet,
the install-includes target does not create this directory. Instead, the
install command copies the headers over $(HOST_DIR)/include, thus
creating a regular file instead of a directory. This leads to the
following installation failure:
Installing includes
install: cannot create directory ‘.../host/usr/include/’: File exists
Makefile:166: recipe for target 'install-pc' failed
make[1]: *** [install-pc] Error 1
Add a patch to fix that.
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Andrey Smirnov <andrew.smirnov@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
PIE support in Buildroot should be enabled via the global option
BR2_RELRO_FULL option, and not done on a per-package basis, therefore
PIE should unconditionally be disabled in the cifs-utils package.
This has the added side-effect that it works around a binutils bug on
SPARC causing the linker to segfault when PIE is enabled:
sparc-linux-gcc -Wall -Wextra -D_FORTIFY_SOURCE=2 -fpie -pie -Wl,-z,relro,-z,now -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -o mount.cifs mount.cifs.o mtab.o resolve_host.o util.o -lcap-ng
collect2: fatal error: ld terminated with signal 6 [Aborted], core dumped
This issue will reappear when we start testing BR2_RELRO_FULL in the
autobuilders, but in the mean time it avoids the problem.
Fixes:
http://autobuild.buildroot.net/results/a5342890f39bdccae1324e7d3dbe0eab1aad28e5/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The lynx package incorrectly uses target LDFLAGS to build a host tool,
which causes a problem when we do a statically link build for the
target, on a host machine that doesn't support static linking.
A simple patch fixes the problematic makefile, and it has been
submitted upstream on the project mailing list.
Fixes:
http://autobuild.buildroot.net/results/38ba2531eeeb4a7985eddd2df8bfaf0b56e6a687/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the rework of the download infrastructure, the "file" download
helper gets passed an URL that starts with file://, but forgets to
strip it before passing it to "cp", causing a failure as the "cp"
program isn't prepared for file paths starting with file://. This is
fixed by stripping the file:// at the beginning of the URL.
In addition, the path passed to cp lacked a slash between the
directory path and the filename part of the url. This is fixed by
adding a slash at the appropriate places.
Fixes the following build failure when the "file" download method is
used:
cp: cannot stat 'file:///home/angelo/DEV/TOOLCHAINSarmv7-eabihf--glibc--bleeding-edge-2017.11-1.tar.bz2': No such file or directory
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_TOOLCHAIN_UCLIBC symbol doesn't exist, it was meant to be
BR2_TOOLCHAIN_BUILDROOT_UCLIBC.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If BR2_SHARED_LIBS is set, only install shared version of library
(continue to build both libraries through all target as there is no
libcap.so target but only a libcap.so.$(VERSION).$(MINOR))
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Buildroot dl-wrapper tries to download
Qt5_CinematicExperience_%22rpi_%221.0.tgz, which fails, so this commit
fixes the archive name by removing useless double quotes.
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libclang.so is statically linking against all LLVM static libraries
instead of linking dynamically against libLLVM.so.
This patch fixes this problem by setting LLVM_LINK_LLVM_DYLIB to ON.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This bump contains many bug fixes, as well as the following security
issue, patched in Go 1.10.1:
CVE-2018-7187: The "go get" implementation in Go 1.9.4, when the
-insecure command-line option is used, does not validate the import path
(get/vcs.go only checks for "://" anywhere in the string), which allows
remote attackers to execute arbitrary OS commands via a crafted web
site.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we fixed cross-compilation in the go package, cleanup the build
to remove the workaround added in 60c5c96ae1
"package/go: Build host tools with host CC". We only need a single pass
to build the go toolchain.
Signed-off-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For various reasons, we've always suggested users to avoid using a
branch as version string for their packages, because it does not work
as a they would expect:
- it is not reproducible, because the branch may change between two
builds that are done at different times;
- it does not even follow the branch, as Buildroot anyway generates
a local tarball, which it will reuse on subsequent builds.
Furthermore, since we fetch and not pull, any existing local branch
is not updated.
Yet, until recently, using a branch name would just work (with the
above limitations): the git tree was cloned, the branch checked out,
and the tarball created.
But with the advent of the git caching, using a branch name does not
work anymore. Indeed, we now do a git-fetch, and that does not create
a local master branch. So we can't check out master, because it does
not exist locally. And for other branches, as noticed above, the local
branch does not get udpated to the remote one.
Furthermore, the local branches are only created by chance, again as a
side-effect of trying to fetch the "special refs".
So, we can't say that we reliably support the use of a branch name.
Update the manual to state that using a branch does not work. Remove
the 'stable' example, as it looked like the name of a stable branch;
instead, replace it with a version string that ressemble a tag.
Fix the layout of the manual by making the version examples an actual
bulleted list.
Note: the above is only entirely true for git. For Mercurial, CVS and
subversion, the status may be mixed, but nonetheless, using branches is
still a bad idea, if at least because it is not reproducible, and
because Buildroot does not even follow the branch. So, we do not
differentiate between the various SCMs, and just flatly state that using
a branch name is not supported.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since we reworked the download infra, the location for packages to look
for their files has moved to a per-package directory.
For systems where a download of the dahdi firmware files was already
done in a version prior to the rework, all was working fine so far,
because the files were indeed in the main DL directory.
But for systems where the download is first attempted after the rework,
the files are not found (even though they are properly downloaded).
Fix the location where dahdi-linux looks for its extra files.
Reported-by: ***** ***** <zyama.abel@mail.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: ***** ***** <zyama.abel@mail.ru>
Cc: Carlos Santos <casantos@datacom.ind.br>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since we reworked the download infra, the location for packages to look
for their files has moved to a per-package directory.
For systems where a download of the asterisk sound files was already
done in a version prior to the rework, all was working fine so far,
because the files were indeed in the main DL directory.
But for systems where the download is first attempted after the rework,
the files are not found (even though they are properly downloaded).
Fix the location where asterisk looks for its extra files.
Reported-by: ***** ***** <zyama.abel@mail.ru>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: ***** ***** <zyama.abel@mail.ru>
Cc: Carlos Santos <casantos@datacom.ind.br>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A person on IRC reported a build failure with the util-linux package,
looking like this:
for I in uname26 linux32 linux64 ; do \
cd /home/aep/consulting/chargery/tracker/output/target/usr/bin && ln -sf setarch $I ; \
done
[...]
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
/bin/sh: line 1: ./ln: cannot execute binary file: Exec format error
The issue was an empty path in the PATH variable, which means "current
working directory", causing a "ln" binary built by util-linux for the
target to be used instead of the system-provided "ln".
We already check a number of things in the PATH and LD_LIBRARY_PATH
variables in support/dependencies/dependencies.sh, but we were not
checking that PATH did not contain an empty path.
This commit fixes that and takes this opportunity to simplify the test
code for PATH and LD_LIBRARY_PATH.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Thomas: improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add some explanations about the Blackfin removal, as suggested by
Yann E. Morin.
- Add list of resolved issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Support for mpv is not present in the tarball version 0.35.2, therefore
we bump this package to current git master branch to prepare the switch
from mplayer to mpv.
Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit dededf0ff2.
Building the only package depending on libcrossguid, Kodi, breaks due to
this bump:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp: In static member function ‘static std::__cxx11::string
StringUtils::CreateUUID()’:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp:1194:10: error: ‘GuidGenerator’ does not name a type
static GuidGenerator guidGenerator;
^~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/utils/
StringUtils.cpp:1195:15: error: ‘guidGenerator’ was not declared in this
scope
auto guid = guidGenerator.newGuid();
^~~~~~~~~~~~~
This happens due to changes in libcrossguid:
https://github.com/graeme-hill/crossguid/blob/master/README.md
"This is version 0.2 of CrossGuid. If you all already using CrossGuid and
your code uses GuidGenerator then you are using version 0.1."
Even Kodi master branch has no support for libcrossguid-0.2.x yet so we
revert the bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit af313accf1,
hasher test application depends on dlfcn.h. To avoid putting all apps
under !BR2_STATIC_LIBS dependency, split BR2_PACKAGE_LIBKCAPI_APPS into
several variables.
Moreover, BR2_USE_MMU is only a dependency of BR2_PACKAGE_LIBKCAPI_TEST
as other applications don't use fork.
Finally, enc or dgst applications could be enabled in a next patch if
needed.
Fixes:
- http://autobuild.buildroot.net/results/7c57f3025030eff41a5cde52759821249859caf1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dropbear 2018.76 now uses the --enable-static option to indicate that a static
binary should be built. This will incorrectly pick up the generic buildroot
option intended for building static libraries, causing an unwanted static
binary build with BR2_SHARED_STATIC_LIBS.
Fix by appending an --disable-static configure flag, overriding the buildroot
default.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit b4fc5a180c (package/busybox: support spaces in module aliases in
mdev) changed the mdev coldplugging to handle sysfs path elements and
modalias values containing spaces. This unfortunately doesn't work as was
recently reported:
http://lists.busybox.net/pipermail/buildroot/2018-May/220903.html
The problem is that sort -z also expects the fields of the input files to be
zero terminated, which is not the case for modalias sysfs entries.
So drop the -z option to sort. Spaces in modalias entries could be handled
with the xargs -d '\n' option, but that is unfortunately not supported by
the busybox applet. Instead, use tr to convert newlines to zeros so we can
use xargs -0.
Reported-by: Daniel Palmer <daniel@0x0f.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure.ac check for atomic intrinsics assumes that if an atomic
intrinsic is not available, it's because we must link with
libatomic. Except that libatomic is not always available, for example
with gcc <= 4.7.
To fix this, this commit adds a patch that reworks the atomic check in
configure.ac. It has been submitted upstream, and tested in a number
of different combinations.
Fixes:
http://autobuild.buildroot.net/results/b045488d880a4013ed82937e7115b7636867e01d/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use += for the SUDO_CONF_ENV conditional assignment to avoid override of
SUDO_CONF_ENV assignments that might be added in the future.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add upstream patch to fix compile with latest x264 library.
Fixes [1]:
gstx264enc.c: In function 'plugin_init':
gstx264enc.c:2900:36: error: 'x264_bit_depth' undeclared (first use in this function); did you mean 'x264_picture_t'?
default_vtable.x264_bit_depth = &x264_bit_depth;
^~~~~~~~~~~~~~
x264_picture_t
[1] http://autobuild.buildroot.net/results/a766a28c584534b6a30839cfd98428d840bce3f2
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils installs its binaries both as bin/<tuple>-<tool> and as
<tuple>/bin/<tool>, and hardlinks are used to reduce disk space
consumption. This causes a problem for host-binutils with our rpath
fixing logic done by "make sdk".
Indeed, the fix-rpath script starts by fixing up the rpath of
bin/<tuple>-<tool>, and sets the RPATH to $ORIGIN/../lib/. Then
fix-rpath moves on to <tuple>/bin/<tool>, and doesn't find the library
the tool depends on, and clears the RPATH. The result is that the
binutils tool are not usable.
Note that this is only visible currently on the ARC architecture,
because on this architecture, binutils is fetched from git, which
causes host-flex to be built, and some binutils tools to use the libfl
shared library. Therefore, the binutils tools don't use just the
standard C library (which is provided by the system) but also libfl
from $(HOST_DIR)/lib, and therefore if the RPATH isn't set correctly,
those tools don't work properly.
In order to address this, this comit adds a post-install hook to
host-binutils that replaces those hard links by symbolic links. It is
worth mentioning that library loading and RPATH usage occurs *after*
resolving the symbolic links, which makes this solution work.
Fixes:
http://autobuild.buildroot.net/results/b2562b05d397d4e1ffe0f8d2f4ce4c84ab6feae1/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One program of udftools uses the readline library, but fails to build
in static linking configurations. In order to fix this, we teach
udftools configure.ac to use pkg-config to detect the readline
library, and to use the proper flags provided by pkg-config.
This obviously requires an autoreconf of the package, and the addition
of host-pkgconf in the dependencies.
Fixes:
http://autobuild.buildroot.net/results/113a94049d89b8f065112e5d4482667a7b7fb843/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (such as udftools) fail to build against readline in
static linking configurations. To fix this, we install the .pc file
provided by readline.
Unfortunately, this .pc file is by default not correct, so a patch is
added to fix it, and this patch requires to re-autoconf the package
(but not autoreconf since only autoconf is used).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udftool/Config.in selects BR2_PACKAGE_READLINE, but udftool does not
depend on it. Readline is not a runtime dependency: one of the udftool
program links against it.
This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes https://gitlab.com/buildroot.org/buildroot/-/jobs/66561794
LINUX_DTS_NAME may end up with a leading space because of the += logic, and
may contain multiple dts files - Neither of which works when we construct
the {cu,simple}Image.$(LINUX_DTS_NAME) make target name.
Fix it by using the first word in the variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The name of the configure option is, and has always been,
--enable-xattr, not --enable-attr. Otherwise, configure
whines:
configure: WARNING: unrecognized options: --enable-attr
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some files of log4cplus are licensed under BSD-2-Clause as stated in
LICENSE file: "Each file of log4cplus source is licensed using either
two clause BSD license or Apache license 2.0."
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable for musl. can-utils now uses the error() glibc extension.
Use Makefile as license file.
Change homepage link to the github repo. The README.md file is much more
informative than the elinux.org wiki page.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this target fails to build:
./scripts/dtc-version.sh: line 17: dtc: command not found
./scripts/dtc-version.sh: line 18: dtc: command not found
*** Your dtc is too old, please upgrade to dtc 1.4 or newer
Even though the fix for this build failure is easy, I prefer to
maintain only imx6ulevk_defconfig, which is a target for the
same board, but uses mainline kernel and U-Boot versions instead.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561695
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this target fails to build:
arch/arm/mach-imx/built-in.o: In function `init_mmdc_lpddr2_settings':
platform-spi_imx.c:(.text+0x8f18): undefined reference to `imx6sll_lpddr2_freq_change'
arch/arm/mach-imx/built-in.o: In function `imx6ul_cpuidle_init':
platform-spi_imx.c:(.init.text+0x195c): undefined reference to `mx6ull_lpm_wfi_end'
platform-spi_imx.c:(.init.text+0x1960): undefined reference to `mx6ull_lpm_wfi_start'
platform-spi_imx.c:(.init.text+0x1964): undefined reference to `imx6ull_low_power_idle'
arch/arm/mach-imx/built-in.o: In function `imx6sl_init_late':
platform-spi_imx.c:(.init.text+0x56f0): undefined reference to `imx6sll_cpuidle_init'
Makefile:969: recipe for target 'vmlinux' failed
NXP 4.9 kernel does not properly support mx31, so better remove this target.
mx31_3stack board is currently supported in U-Boot and kernel mainline,
so if someone is interested on this board, then a target can be introduced
later which uses these mainline components.
Currently I do not have access to this board, so remove it its defconfig
for now.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561688
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently this target fails to build:
Error: No BOOT_FROM tag in board/freescale/mx6slevk/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
This problem has been already solved in upstream U-Boot, but not
on NXP version of U-Boot.
To avoid the maintainance burden of keeping two defconfigs for the
same board, remove freescale_imx6sololiteevk_defconfig in favor
of imx6slevk_defconfig, which uses U-Boot and kernel mainline.
Fixes: https://gitlab.com/buildroot.org/buildroot/-/jobs/66561693
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
host-nasm fails to compile with GCC 8:
In file included from ./include/nasm.h:46,
from asm/nasm.c:47:
./include/nasmlib.h:194:1: error: ‘pure’ attribute on function returning ‘void’ [-Werror=attributes]
void pure_func seg_init(void);
^~~~
Pull a patch from upstream that removes the stale declaration of
seg_init, which was eliminated a long time ago.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Dropbear 2018.76 changed the default ecdsa host key size form 521 to 256
bits, but this breaks systems with an existing 521 bit key, blocking ssh
logins.
Apply the upstream fix from https://secure.ucc.asn.au/hg/dropbear/rev/0dc3103a5900 :
Only advertise a single server ecdsa key when -R (generate as required) is
specified. Fixes -R now that default ecdsa key size has changed.
[Peter: apply-patches.sh does not like suffix-less filename, so include
patch in Buildroot]
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Note that CVE-2018-9336 fixed in this version does not affect Buildroot
since it is Windows specific.
Drop interoperability with older busybox versions. We removed support
for busybox version selection long ago.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Arnout reported an issue with the upcoming top-level parallel build.
The file /etc/shells can be modified by several packages (shell providers)
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When mksh is selected, /bin/mksh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using mksh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When zsh is selected, /bin/zsh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using zsh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When tmux is selected, /usr/bin/tmux is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using tmux as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When screen is selected, /usr/bin/screen is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using screen as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
While at it, drop an empty line between an existing hook definition
and its registration, to be consistent with the coding style used in
the rest of Buildroot.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When dash is selected, /bin/dash is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using dash as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When ash (busybox) is selected, /bin/{a,hu}sh is not added to /etc/shells
(see man shells). So, login tools like dropbear reject the ssh
connections for users using {a,hu}sh as shell in /etc/passwd.
buildroot authpriv.warn dropbear[853]: User 'kubu' has invalid shell, rejected
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit ea55e1323 (core/pkg-infra: don't enforce site-method for extra
downloads) forgot to account for those packages that have nothing to
download, like the skeleton, or like virtual packages...
The side effect is that the message "foo Downloading" is thus
displayed when it should not be.
Fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, GST1_PLUGINS_BAD_LICENSE_FILES starts out set to
both the GPL COPYING file and the LGPL COPYING.LIB file, but
the GST1_PLUGINS_BAD_LICENSE handling only claims LGPL, and
then intelligently adds GPL if needed. This change moves the
GPL file addition to the same conditional clause so that the
GPL file is included in the legal-info location only if GPL
code is actually used.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The systemd ConditionNeedsUpdate option is useful when offline updates
of the vendor operating system resources in /usr require updating of
/etc or /var on the next following boot.
Two examples of services making use of this option are
systemd-hwdb-update.service and systemd-sysusers.service.
ConditionNeedsUpdate=/etc will be true if the mtime of /etc/.updated
is older than the mtime of /usr. After services conditional on
ConditionNeedsUpdate have run, systemd-update-done.service will
synch the mtime of /usr to /etc/.updated so that the condition will
be false on subsequent boots.
For systems with writable /usr partitions where updates are done to
the running system, the update program will touch /usr as a final step.
But with Buildroot, where updates are often done by dumping a new
image onto the device, and where /usr is on a filesystem mounted
read-only, touching /usr as part of the update process is not practical.
Instead, it should be done a build time.
For testers, please note that systemd-update-done in v234 added a
regression where the mtime of /etc/.updated is set to the current time
instead of the mtime or /usr. This will be fixed in v239.
For more details, see:
http://0pointer.de/public/systemd-man/systemd.unit.htmlhttp://0pointer.de/public/systemd-man/systemd-update-done.service.html
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
crypt() is an optional glibc feature. Some distros, like Fedora 28, are
phasing it out to be replaced with libxcrypt [1]. Unfortunately this
change is only ABI compatible, not source code compatible, i.e. the code
will compile with warnings about undefined crypt(), but the resulting
binary will crash.
Follow the guidance in the Fedora bug and include crypt.h when
_XOPEN_CRYPT is not defined.
[1] https://bugzilla.redhat.com/show_bug.cgi?id=1566464
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgsasl needs wctomb, if not available it will define it to
rpl_wctomb. However, as there is no rpl_wctomb implementation, the .so
ends up with an undefined reference to wctomb.
This will cause linker errors for packages trying to use it such as
msmtp:
/home/peko/autobuild/instance-0/output/host/bin/../microblazeel-buildroot-linux-uclibc/sysroot/usr//lib/libgsasl.so:
undefined reference to `wctomb'
Fixes:
- http://autobuild.buildroot.net/results/1bc7cb9a2dd1af746c78f3150528206b7256e40f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LLVMHello.so contains the Hello World example of an
LLVM pass. It is not needed on the target.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The site method only ever applies to the main download, while extra
downloads are always to be fetched with wget.
However, the site method is prepended to the URL from within the
DOWNLOAD macro (well, a variable evaluated in the DOWNLOAD macro),
which is called for each download of a package, thus effectively
prepending the site method to all downloads, even the extra ones (and
the patches).
We fix that by prepending the site method from within the
generic-package infra, so that it only applies to the main download.
For that, we move the main _SOURCE out of the foreach loop, so that
we can prepend the site-method to it, without impacting the other
downloads.
Reported-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when the main download if from an SCM, we exclude all
downloads from being hash-checked, on the assumption that we don't
have hashes for downloads from an SCM.
However, the exclusion is computed on the DOWNLOAD macro, which is
called for each download of a package, thus effectively disabling
hash checks for extra downloads, even though those are only ever
download with wget.
What we really wanted to do, in fact, was to exclude just the main
download.
We fix that by appending the main source file to the global list of
excluded files, from within the generic-package infra itself.
Reported-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit "add dependency on elfutils for R600 with LLVM" [1] select
elfutils package at Kconfig level without adding it the make dependency.
Enabling r600 support lead to a build issue when building from
scratch with "make mesa3d".
Fixes:
checking for RADEON... yes
configure: error: r600 requires libelf when using llvm
elfutils dependency is needed by r600 with llvm support and radeonSI.
Fixes:
checking for RADEON... yes
checking for AMDGPU... yes
configure: error: radeonsi requires libelf when using llvm
Add a new BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS hidden Config.in boolean
selected by R600 and RadeonSI at Kconfig level.
When selected, BR2_PACKAGE_MESA3D_NEEDS_ELFUTILS add elfutils dependency
at make level.
[1] 92fda8761a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Michał Kalbarczyk <michal@gamecodehq.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_MESA3D_OPENGL_EGL is selected with RadeonSI drvier,
mesa platform must be specified with drm.
Fixes:
hecking for RADEON... yes
checking for AMDGPU... yes
configure: error: radeonsi requires one of these:
1) --with-platforms=drm (X, Wayland, offscreen rendering based on DRM)
2) --with-platforms=surfaceless (offscreen only)
3) --with-platforms=android (Android only)
Recommended options: drm,x11
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
VLC uses Git as its version control system, so it makes sense to use
Git formatted patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
When a static /dev is used on a readonly rootfs then the runtime ln
invocations in the inittab will fail, so we need to add the symlinks at
build time. Makedevs doesn't support creating symlinks, so instead add the
symlinks to the default skeleton.
For non-static /dev setups, the kernel will mount devtmpfs which shadows the
/dev of the rootfs, but then the runtime ln invocations in inittab will
create the symlinks.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
This symbolic link and his companions `/dev/std*` are created by (e)udev [1],
but not by mdev, resulting in the following error when using the following
expression:
```
bash: /dev/fd/62: No such file or directory
```
For the sake of simplicity, lets fix this by creating the symlinks in inittab.
It is only really needed if eudev isn't used, but it doesn't really hurt to
create them even if eudev will recreate them afterwards.
Note, that we do not create the symlink `/dev/core` as `/proc/kcore` is
not available on all platforms, e.g. ARM, and the feature is not much
appreciated [2].
[1] 8943501993/src/shared/dev-setup.c (L35-L40)
[2] https://lwn.net/Articles/45315/
[Peter: redirect errors to /dev/null for ro rootfs]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some applications, e.g. bashs process subsitution feature, rely on the
convention of `/dev/fd` being a symbolic link to `/proc/self/fd`.
This symbolic link and his companions `/dev/std*` are created by (e)udev [1],
but not by mdev, resulting in the following error when using the following
expression:
```
bash: /dev/fd/62: No such file or directory
```
For the sake of simplicity, lets fix this by creating the symlinks in inittab.
It is only really needed if eudev isn't used, but it doesn't really hurt to
create them even if eudev will recreate them afterwards.
Note, that we do not create the symlink `/dev/core` as `/proc/kcore` is
not available on all platforms, e.g. ARM, and the feature is not much
appreciated [2].
[1] 8943501993/src/shared/dev-setup.c (L35-L40)
[2] https://lwn.net/Articles/45315/
[Peter: redirect output (errors) to /dev/null for ro rootfs]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop uClibc-ng compatibility patch. Current uClibc-ng provides the
needed definitions.
Drop the libc-config.h musl compatibility workaround patch. iproute2
update its headers copy to current kernel version for which this
workaround is no longer needed.
Don't modify tc/Makefile to make XT_LIB_DIR get the value of
IPT_LIB_DIR. Pass the correct value directly in CFLAGS.
Add a patch removing arpd dependency on threading support.
Rename IPROUTE2_WITH_IPTABLES to IPROUTE2_DISABLE_IPTABLES which better
describes what it does.
Don't patch the configure script for the cross compiler. The CC
environment variable is enough.
Don't force the CCOPTS make variable. The CFLAGS environment variable
does the trick for target code.
Don't patch CCOPTS out of netem/Makefile. The CBUILD_CFLAGS environment
variable can pass the host CFLAGS to host code.
The ifcfg script is now POSIX shell compatible. Remove its installation
dependency on bash.
Pass installation DESTDIR in the environment. Don't force SBINDIR, DOCDIR, and
MANDIR. The default values are fine.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We currently attempt a shallow clone, as tentative to save bandwidth and
download time.
However, now that we keep the git tree as a cache, it may happen that we
need to checkout an earlier commit, and that would not be present with a
shallow clone.
Furthermore, the shallow fetch is already really broken, and just
happens to work by chance. Consider the following actions, which are
basically what happens today:
mkdir git
git init git
cd git
git remote add origin https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
git fetch origin --depth 1 v4.17-rc1
if ! git fetch origin v4.17-rc1:v4.17-rc1 ; then
echo "warning"
fi
git checkout v4.17-rc1
The checkout succeeds just because of the git-fetch in the if-condition,
which is initially there to fetch the special refs from github PRs, or
gerrit reviews. That fails, but we just print a warning. If we were to
ever remove support for special refs, then the checkout would fail.
The whole purpose of the git cache is to actually save bandwidth and
download time, but in the long run. For one-offs, people would
preferably use a wget download (e.g. with the github macro) instead of
a git clone.
We switch to always doing a full clone. It is more correct, and pays off
in the long run...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When a git tree has had sub-dir <-> sub-module conversions, or has had
submodules added or removed over the course of time, checking out a
changeset across those conversions/additions/removals may leave
untracked files, or may fail because of a conflict of type.
So, before we checkout the new changeset, we forcibly remove the
submodules. The new set of submodules, if any, will be restored later.
Ideally, we would use a native git command: git submodule deinit --all.
However, that was only introduced in git 1.8.3 which, while not being
recent by modern standards, is still too old for some enterprise-grade
distributions (RHEL6 only has git-1.7.1).
So, instead, we just use git submodule foreach, to rm -rf the submodules
directory.
Again, we would ideally use 'cd $toplevel && rm -rf $path', but
$toplevel was only introduced in git 1.7.2. $path has always been there.
So, instead, we just cd back one level, and remove the basename of the
directory.
Eventually, we need to get rid of now-empty and untracked directories,
that were parents of a removed submodule. For example. ./foo/bar/ was a
submodule, so ./foo/bar/ was removed, which left ./foo/ around.
Yet again, recent-ish git versions would have removed it during the
forced checkout, but old-ish versions (e.g. 1.7.1) do not remove it with
the forced checkout.
Instead we rely on the already used forced-forced clean of directories,
untracked, and ignored content, to really get rid of extra stuff we are
not interested in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In some cases, the repository may be in a state we can't automatically
recover from, especially since we must still support oldish git versions
that do not provide the necessary commands or options thereof.
As a last-ditch recovery, delete the repository and recreate the cache
from scratch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We really want the user not to use our git cache manually, or their
changes (committed or not) may eventually get lost.
So, add a warning file, not unlike the one we put in the target/
directory, to warn the user not to use the git tree.
Ideally, we would have carried this file in support/misc/, but the git
backend does not have access to it: the working directory is somewhere
unknown, and TOPDIR is not exported in the environment.
So, we have to carry it in-line in the backend instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When rebuilding a package, simply appending the package's file list to
the global list means that the package list grows for every rebuild, as
does the time taken to check for files installed by multiple packages.
Furthermore, we get false positives where a file is reported as being
installed by multiple copies of the same package.
With this approach we may end up with orphaned files in the target
filesystem if a package that has been updated and rebuilt no longer
installs the same set of files, but we know that only a clean build will
produce reliable results. In fact it may be helpful to identify these
orphaned files as evidence that the build is not clean.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
LibreSSL 2.7.x breaks libcurl 7.59.0 with the error:
error: static declaration of ‘OpenSSL_version_num’ follows non-static
declaration
This failure has since been fixed upstream with commit:
7c90c93c0b
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Freescale specific alsa-lib plugins for the i.MX processor family.
For now, the only provided plugin is:
* Rate Converter Plugin Using Freescale ASRC Resampler
The ASRC hardware resampler can be found on i.MX53 and most i.MX 6
processors.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- Remove the mention "This package is provided by Freescale as-is and
doesn't have an upstream." from the Config.in help text, since
according to Gary Bisson, there is a Git repository for such
projects, and therefore some form of upstream.
- Add missing entry to DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: slight rephrasing in error message, update manual]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our package infrastructure uses inheritance of a number of values from
the target package to the host package, which assumes the target
package is defined before the host package. In addition, future
changes are going to make this requirement even more important.
Therefore, let's fix the qemu package so that it declares its target
variant before its host variant, like all other packages in
Buildroot. We handle qemu separately from other packages, because
unlike other packages, it didn't had the "eval" for the host and
target packages at the end of the file, but rather all variables
related to the host variant first, then the call to the package
infrastructure for the host variant, then the variables related to the
target variant, and finally the call to the package infrastructure for
the target variant. We are inverting the order of those two big parts
in this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Our package infrastructure uses inheritance of a number of values from
the target package to the host package, which assumes the target
package is defined before the host package. In addition, future
changes are going to make this requirement even more important.
Therefore, let's fix the android-tools, gauche, lcms2,
linux-syscall-support and pngquant packages, so that they declare
their target variant before their host variant, like all other
packages in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
CVE-2017-12122: An exploitable code execution vulnerability exists in the
ILBM image rendering functionality of SDL2_image-2.0.2. A specially crafted
ILBM image can cause a heap overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14440: An exploitable code execution vulnerability exists in the
ILBM image rendering functionality of SDL2_image-2.0.2. A specially crafted
ILBM image can cause a stack overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14441: An exploitable code execution vulnerability exists in the
ICO image rendering functionality of SDL2_image-2.0.2. A specially crafted
ICO image can cause an integer overflow, cascading to a heap overflow
resulting in code execution. An attacker can display a specially crafted
image to trigger this vulnerability.
CVE-2017-14442: An exploitable code execution vulnerability exists in the
BMP image rendering functionality of SDL2_image-2.0.2. A specially crafted
BMP image can cause a stack overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14448: An exploitable code execution vulnerability exists in the
XCF image rendering functionality of SDL2_image-2.0.2. A specially crafted
XCF image can cause a heap overflow resulting in code execution. An
attacker can display a specially crafted image to trigger this
vulnerability.
CVE-2017-14449: A double-Free vulnerability exists in the XCF image
rendering functionality of SDL2_image-2.0.2. A specially crafted XCF image
can cause a Double-Free situation to occur. An attacker can display a
specially crafted image to trigger this vulnerability.
CVE-2017-14450: A buffer overflow vulnerability exists in the GIF image
parsing functionality of SDL2_image-2.0.2. A specially crafted GIF image
can lead to a buffer overflow on a global section. An attacker can display
an image to trigger this vulnerability.
For details, see the announcement:
https://discourse.libsdl.org/t/sdl-image-2-0-3-released/23958
Also add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Requests need hashlib to run with Python 2. Otherwise it is not possible to
import, due to missing e.g. md5.
[Peter: tweak commit message]
Signed-off-by: Sven Haardiek <sven.haardiek@iotec-gmbh.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use tar.xz (tar.bz2 is not available since 1.4.8)
- Use cmake infrastructure (autotools has been removed)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use tar.xz (tar.bz2 is not available since 1.3.5)
- Use cmake infrastructure (autotools has been removed)
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to cmake infrastructure
COPYING has been replaced by LICENSE
Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the run-time tests to build rust and rust-bin packages are run via Docker,
the $USER environment variable is not set, which makes cargo fail when
initializing the test project.
So add it to make cargo happy.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The VTE package contains a termcap file implementation for
terminal emulators.
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
[Thomas: fix encoding of license name.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add hash for license file
- guid.cpp and guid.h have been renamed Guid.cpp and Guid.hpp (they
will be renamed back to guid.cpp and guid.hpp in next release)
- Continue to use package-generic infrastructure as cmake doesn't work
properly with this version. Commit such as
974def4e0a
is needed. Migration on cmake should be done in next package
release.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for Volcanic Islands (VI), Sea Islands (CI) and Southern
Islands (SI) cards.
This firmware files will be needed if linux kernel is compiled with
amdgpu enabled.
Signed-off-by: David Barbion <davidb@230ruedubac.fr>
[Thomas: add hash for LICENSE.amdgpu]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove buildroot systemd script to use the script embedded by boinc
since version 7.9.1.
Set BOINC_USERS to be able to use this script
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
bluez-alsa is a Bluetooth Audio ALSA Backend.
Note that we are using the latest commit from git master branch
instead of the latest version tag v1.2.0 which is almost a year old
and is 64 commits behind master.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas:
- simplify the comments in the "depends on"
- move the Config.in comment below the hcitop option to let
menuconfig properly indent the hcitop option under bluez-alsa]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, Dropbear's configure script enables hardening
flags. Unfortunately, the check for SSP only uses AC_COMPILE_IFELSE(),
and therefore doesn't properly test for the availability of libssp,
visible only at link time.
In addition, Buildroot passes its own hardening flags, depending on
various global options. So, we simply disable hardening flags in
Dropbear.
This fixes a build failure with non-SSP capable toolchains happening
since the bump to 2018.76.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
with this new version:
- "configure --enable-static" should now be used instead of
"make STATIC=1"
- any customised options should be put in localoptions.h
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to target/mips/TODO in the Qemu sources:
MIPS64
------
- Userland emulation (both n32 and n64) not functional.
And indeed, trying to run a mips64n32 binary under qemu user emulation
results in:
Invalid ELF image for this architecture
So we move the BR2_mips64(el) dependency from
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS to
BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS, so that only the system
emulation is available on mips64, and not the user-mode emulation.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Not all architectures are supported by both the system emulation and
user-mode emulation in Qemu, so a single
BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS doesn't work very well.
Therefore, this commit introduces the
BR2_PACKAGE_HOST_QEMU_{SYSTEM,USER}_ARCH_SUPPORTS hidden options. We
keep the BR2_PACKAGE_HOST_QEMU_ARCH_SUPPORTS option for the (numerous)
architectures supported by both system emulation and user-mode
emulation.
The 'select' logic to make sure that at least either system emulation
or user-mode emulation is selected is reworked, and done carefully to
avoid recursive Kconfig dependencies.
For now BR2_PACKAGE_HOST_QEMU_SYSTEM_ARCH_SUPPORTS and
BR2_PACKAGE_HOST_QEMU_USER_ARCH_SUPPORTS are the same, but they will
become different in a follow-up commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Linux 3.10, perf's NO_NEWT configuration option simply sets
NO_SLANG=1 and there is no dependency on libnewt.
We already handle NO_SLANG correctly based on whether or not
BR2_PACKAGE_SLANG is selected, so all we accomplish by setting NO_NEWT=1
is disabling perf's TUI when all of the dependencies are available.
To simplify all of this, introduce a new config option to enable the
perf TUI which depends on slang and add a check to prevent building the
TUI on versions which are too old. The check for NO_SLANG is equivalent
to checking if NO_NEWT is required as NO_SLANG was added in the same
commit that removed the libnewt dependency and deprecated NO_NEWT
(6692c262df4f, "perf tools: Remove dependency on libnewt", 2013-03-28).
Signed-off-by: John Keeping <john@metanate.com>
[Thomas: add missing BR2_USE_MMU dependency, coming from the slang
package. Noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This tool might be useful on Android devices modded with Buildroot. Indeed
it allows to modify Android Boot Image partition directly from running
rootfs and so let the user free to keep Android stuff on his device
(mainly bootloader) while testing/using Buildroot kernel/rootfs.
For example, one can modify kernel cmdline on Boot Image partition and
tell Android bootloader to launch kernel with a given rootfs fitted with BR
instead of Android's one.
Build-tested with ./utils/test-pkg -p abootimg -c config.abootimg -a
with config.abootimg containing:
BR2_USE_MMU=y
BR2_PACKAGE_ABOOTIMG=y
BR2_PACKAGE_UTIL_LINUX=y
BR2_PACKAGE_UTIL_LINUX_LIBBLKID=y
armv5-ctng-linux-gnueabi [ 1/47]: OK
armv7-ctng-linux-gnueabihf [ 2/47]: OK
br-aarch64-glibc [ 3/47]: OK
br-arcle-hs38 [ 4/47]: OK
br-arm-basic [ 5/47]: OK
br-arm-cortex-a9-glibc [ 6/47]: OK
br-arm-cortex-a9-musl [ 7/47]: OK
br-arm-cortex-m4-full [ 8/47]: SKIPPED
br-arm-full [ 9/47]: OK
br-arm-full-nothread [10/47]: OK
br-arm-full-static [11/47]: OK
br-bfin-full [12/47]: SKIPPED
br-i386-pentium4-full [13/47]: OK
br-i386-pentium-mmx-musl [14/47]: OK
br-m68k-5208-full [15/47]: SKIPPED
br-m68k-68040-full [16/47]: OK
br-microblazeel-full [17/47]: OK
br-mips32r6-el-hf-glibc [18/47]: OK
br-mips64-n64-full [19/47]: OK
br-mips64r6-el-hf-glibc [20/47]: OK
br-mipsel-o32-full [21/47]: OK
br-nios2-glibc [22/47]: OK
br-openrisc-uclibc [23/47]: OK
br-powerpc-603e-basic-cpp [24/47]: OK
br-powerpc64le-power8-glibc [25/47]: OK
br-powerpc64-power7-glibc [26/47]: OK
br-powerpc-e500mc-full [27/47]: OK
br-sh4-full [28/47]: OK
br-sparc64-glibc [29/47]: OK
br-sparc-uclibc [30/47]: OK
br-x86-64-core2-full [31/47]: OK
br-x86-64-musl [32/47]: OK
br-xtensa-full [33/47]: OK
i686-ctng-linux-gnu [34/47]: OK
linaro-aarch64 [35/47]: OK
linaro-arm [36/47]: OK
mips64el-ctng_n32-linux-gnu [37/47]: OK
mips64el-ctng_n64-linux-gnu [38/47]: OK
powerpc-ctng_e500v2-linux-gnuspe [39/47]: OK
sourcery-arm-armv4t [40/47]: OK
sourcery-arm [41/47]: OK
sourcery-arm-thumb2 [42/47]: OK
sourcery-mips64 [43/47]: OK
sourcery-mips [44/47]: OK
sourcery-nios2 [45/47]: OK
sourcery-x86-64 [46/47]: OK
x86_64-ctng_locales-linux-gnu [47/47]: OK
47 builds, 3 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
[Thomas: fix license.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides Clang tools and libraries for the host and
libclang for the target.
host-clang is needed to build libclc, which is provided in a follow-up
patch.
We need libclang for the target because it is used by most of OpenCL
implementations.
A later patch in this series will enable Clover, the OpenCL
implementation part of Mesa3D, which requires libclang.
clang-tblgen must be copied to HOST_DIR as it is not installed by
default but is needed for cross-compilation:
http://lists.llvm.org/pipermail/cfe-dev/2015-June/043318.html
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- Add Config.in comment about BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- Minor reformatting/rewrapping of comments in .mk file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The website advertises a favicon in PNG format, but we don't actually
provide one. From docs/website/header.html:
<link rel="shortcut icon" href="images/favicon.png">
So add one. Generated by:
convert -geometry 32x32! docs/website/images/logo_small.png \
docs/website/favicon.png
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The clipboard javascript code causes an error:
Uncaught TypeError: Illegal constructor
at buildroot.js:58
Which is caused by a recent change in upstream clipboard.js:
https://github.com/zenorocha/clipboard.js/releases/tag/v2.0.0
Changes constructor from new Clipboard() to new ClipboardJS()
The issue was that we were using the master version of clipboard.js instead
of a specific release. Fix it by using the 1.7.1 version (latest release
before the constructor change) instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Library to enable your code run as a daemon process on Unix-like
systems.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If one wants to use GDB with python support on the target, you need the support
files installed by GDB. These get usually deleted to save some space, so I just
wrapped the Makefile code deleting them in a conditional block depending on if
python support is active or not.
Signed-off-by: Jonas Zaddach <jzaddach@cisco.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas:
- use positive logic "if python is disabled"
- put the comment inside the condition, as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This script causes a large number of flake8 warnings, is rarely used
(but even never used), and is going to be replaced at some point by
the improved pkg-stats that will give details about the upstream
version available for all packages, not just X.org packages.
Therefore, let's drop the xorg-release script in order to silence all
those flake8 warnings:
support/scripts/xorg-release:36:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:58:27: E201 whitespace after '{'
support/scripts/xorg-release:58:44: E203 whitespace before ':'
support/scripts/xorg-release:58:54: E202 whitespace before '}'
support/scripts/xorg-release:63:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:64:15: E261 at least two spaces before inline comment
support/scripts/xorg-release:67:32: E261 at least two spaces before inline comment
support/scripts/xorg-release:86:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:95:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:107:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:115:20: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:123:34: E201 whitespace after '{'
support/scripts/xorg-release:124:46: E203 whitespace before ':'
support/scripts/xorg-release:124:50: E202 whitespace before '}'
support/scripts/xorg-release:127:1: E302 expected 2 blank lines, found 1
support/scripts/xorg-release:141:15: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:146:21: W601 .has_key() is deprecated, use 'in'
support/scripts/xorg-release:176:1: E305 expected 2 blank lines after class or function definition, found 1
support/scripts/xorg-release:180:1: W391 blank line at end of file
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
CMake < 3.11 doesn't support add_library() without any source file
(i.e add_library(foo SHARED)). But flann CMake use a trick that use
an empty string "" as source list (i.e add_library(foo SHARED "")).
This look like a bug in CMake < 3.11.
With CMake >= 3.11, the new behaviour of add_library() break the
existing flann CMake code.
>From CMake Changelog [1]:
"add_library() and add_executable() commands can now be called without
any sources and will not complain as long as sources are added later
via the target_sources() command."
Note: flann CMake code doesn't use target_sources() since no source file
are provided intentionally since the flann shared library is created by
linking with the flann_cpp_s static library with this line:
target_link_libraries(flann_cpp -Wl,-whole-archive flann_cpp_s -Wl,-no-whole-archive)
If you try to use "add_library(flann_cpp SHARED ${CPP_SOURCES})" (as it should
be normally done), the link fail due to already defined symbol.
They are building the shared version using the static library "to speedup the
build time" [3]
This issue is already reported upstream [2] with a proposed solution.
Fixes:
http://autobuild.buildroot.net/results/b2f/b2febfaf8c44ce477b3e4a5b9b976fd25e8d7454
[1] https://cmake.org/cmake/help/v3.11/release/3.11.html
[2] https://github.com/mariusmuja/flann/issues/369
[3] 0fd62b43be
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Davide Viti <zinosat@tiscali.it>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added license hash, switched _UPSTREAM to an upstream directory which
also contains older release tarballs.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch to split libzstd install target into pc, static, shared and
includes target. Call only the needed ones for the buildroot
staging/target install steps (respect the static/shared
configuration).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Yann E. Morin, refactor the build/install
commands to use only one invocation, with intermediate ZSTD_BUILD_LIBS
and ZSTD_INSTALL_LIBS variables, defined depending on whether
static/shared/static+shared is selected.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For the host only the libzstd library is built (no need for host-lz4
host-xz host-zlib dependencies because they affect only the cmdline
tool).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: use '-C $(@D)/lib' instead of '-C $(@D) lib' at build time,
to be consistent with what is done at install time, as suggested by
Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-9234: Unenforced configuration allows for apparently
valid certifications actually signed by signing subkeys.
Remove --disable-doc from configure options. We pass this options to all
autotools packages.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, the builsystem for uboot defaults to 'legacy', while the
default version is very well capable of using the 'kconfig' buildsystem
instead.
Having the 'legacy' buildsystem be the default in that case makes it
quite inconvenient for users: they would expect to be able to use e.g.
uboot-menuconfig et al. with the default uboot version.
Switch to using 'kconfig' when we use the latest version. Keep the
'legacy' as default for everything else.
Also, invert the 'legacy' and 'kconfig' entries in the choice: it is
nicer to have the recent and future-proof entry first.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
More specifically, this branch has recently seen a fix that is needed
for ATF to build properly with recent gcc versions:
c96ec59f8b
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of the ARM Trusted Firmware from Marvell was a Git branch,
not a Git commit, leading to unreproducible results. So let's use a
Git commit instead, which is the latest available from the branch that
was previously used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This test case currently fails to build with:
./build/juno/release/bl1/context_mgmt.o: In function `cm_prepare_el3_exit':
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): undefined reference to `cm_set_next_context'
context_mgmt.c:(.text.cm_prepare_el3_exit+0x54): relocation truncated to fit: R_AARCH64_JUMP26 against undefined symbol `cm_set_next_context'
This issue has been fixed upstream in commit
10c252c14b7f446c0b49ef1aafbd5d37804577dd, available since v1.3. So
while we bump, let's bump to the latest version of ATF, v1.5.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/64360659
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 5563a1c6a4
("support/check-uniq-files: support weird locales and filenames"), the
'csv' Python module is no longer used by the check-uniq-files.
Due to this, flake8 complains with:
support/scripts/check-uniq-files:4:1: F401 'csv' imported but unused
Fix this by dropping the useless csv import.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The release announcement mentions these security fixes:
Defend against Bellcore glitch attacks by verifying the results of RSA
private key operations.
Fix implementation of the truncated HMAC extension. The previous
implementation allowed an offline 2^80 brute force attack on the HMAC
key of a single, uninterrupted connection (with no resumption of the
session).
Reject CRLs containing unsupported critical extensions.
Fix a buffer overread in ssl_parse_server_key_exchange() that could
cause a crash on invalid input. (CVE-2018-9988)
Fix a buffer overread in ssl_parse_server_psk_hint() that could cause
a crash on invalid input. (CVE-2018-9989)
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't build the static library when BR2_SHARED_LIBS=y, to reduce build
time.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes it is useful to pass some parameters to ModemManager when it
starts (e.g. --log-level). Allow the user add a file with such flags in
a MODEMMANAGER_ARGS variable. This is simpler than overriding the whole
startup script (e.g. by means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since bluez5_utils 5.49, some code using readline was compiled even if
readline was not available. After this issue was reported upstream, a
patch was proposed by an upstream developer to address the issue. This
commit integrates this patch (under review upstream), which fixes the
problem.
Fixes:
http://autobuild.buildroot.net/results/3e266a79acab8b8eb33360f7afbc1cd6db46f7cb/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A number of fcntl.h definitions were missing on OpenRISC in uClibc-ng,
causing build failures such as:
gfile.c: In function 'splice_stream_with_progress':
gfile.c:3017:35: error: 'F_SETPIPE_SZ' undeclared (first use in this function)
buffer_size = fcntl (buffer[1], F_SETPIPE_SZ, 1024 * 1024);
This comit backports a patch that was merged in upstream uClibc-ng,
which addresses this problem.
Fixes:
http://autobuild.buildroot.net/results/182ebbba6c7466b07e965e5120d919cbcf5e9da6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit updates all the pre-built Buildroot toolchains, which have
all been rebuilt with Buildroot as of commit 046c5e2. The initial
motivation for this update is that an upcoming bump of procps-ng uses
fopencookie(), which has only been introduced in musl 1.1.19, which
itself started being used in Buildroot after the 2018.02 release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Older versions of tar (e.g. 1.27.1) incorrectly interpret the escaping
of the regexp separator, and generate broken tarballs.
For example, given the following transform expression:
--transform="s/^\.\//squashfs-e38956b92f738518c29734399629e7cdb33072d3\//"
the resulting paths in the generated tarball would be:
squashfs-e38956b92f738518c29734399629e7cdb33072d3\/
i.e. a directory which last character is indeed a '\'.
We fix that by using a separator which is very unlikely to occur in a
filename.
Fixes:
http://autobuild.buildroot.org/results/742/7427f34e5c9f6d043b0fe6ad2c66cc0f31d2b24f/
and probably a slew of others as well...
Take this opportunity to fix indentation on the following line
(leading spaces, not TABs).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The current method of supporting static only build, removal of all lines
that match the SHARED regex from lib/Makefile, is crude and fragile.
Instead, patch lib/Makefile to allow disable of shared libraries.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 2a27294e9a ("grub2: force
-fno-stack-protector in CFLAGS"), a fix was made to the grub2 package
to make it build properly even when SSP support is enabled.
However, commit 20a4583ebf ("security
hardening: add RELFO, FORTIFY options") reworked how SSP options are
passed, and they are now passed in CPPFLAGS instead of CFLAGS, making
the fix introduced by 2a27294e9a no
longer operating.
This commit will force no-stack-protector in CPPFLAGS instead of
CFLAGS.
Fixes bug #10961.
Signed-off-by: Tarek El-Sherbiny <tarek_el-sherbiny@waters.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Check:
- the daemon is started;
- a message is collected;
- the daemon does not issue a warning message on startup.
When the .conf file version does not match the package version a warning
message shows up on serial on every boot. This message is generated by
syslog-ng before it is running, so it is not logged to
/var/log/messages. So in order to test the message is generated, restart
the server. It makes the message appears on /var/log/messages (since the
server is already running) where its existence can be easily tested
using grep.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove a runtime warning message about configuration file being too old.
Do the same as commit 3dad25466d "syslog-ng: Bump version header in conf
file to 3.9". Package version of syslog-ng is 3.10.1, so bump version
number in syslog-ng.conf to 3.10.
Also add a comment to avoid the same warning message reappears when the
package is bumped.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a downloaded toolchain doesn't have its binaries
placed directly in a "bin" subfolder (where BuildRoot currently looks
for them).
A common example is the official Raspberry Pi Toolchain
(https://github.com/raspberrypi/tools), which has its binaries in
"arm-bcm2708/arm-linux-gnueabihf/bin".
This commit introduces BR2_TOOLCHAIN_EXTERNAL_REL_BIN_PATH that defaults
to "bin" and can be changed as needed.
Signed-off-by: Calin Crisan <ccrisan@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework a bit how TOOLCHAIN_EXTERNAL_REL_BIN_PATH is defined.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use lib and lz4 make targets to avoid build of the manual generator, and
the examples. Both of them use the target compiler to build host tools.
Add license files hashes.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patches.
Add upstream patch fixing build with musl libc.
Add license file hash.
Set LDLIBS to TARGET_LDFLAGS for TARGET_LDFLAGS to be added to the link
commands. Makefile does not use the LDFLAGS environment variable. This
fixes static linking.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are cases where a repository might be broken, e.g. when a previous
operation was killed or otherwise failed unexpectedly.
We fix that by always initialising the repository, as suggested by
Ricardo. git-init is safe on an otherwise-healthy repository:
Running git init in an existing repository is safe. It will not
overwrite things that are already there. [...]
Using git-init will just ensure that we have the strictly required files
to form a sane tree. Any blob that is still missing would get fetched
later on.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
git always look directories up until it finds a repository. In case
the git cache is broken, it may no longer be identified as a repository,
and git will look higher in the directories until it finds one.
In the default conditions, this would be Buildroot's own git tree
(because DL_DIR is a subdir of Buildroot), but in some situations may
very well be any repository the user has Buildroot in, like a
br2-external tree...
So, we force git to use our git cache and never look elsewhere, as
Suggested by Ricardo.
Use GIT_DIR, as it has been there for ages now, while --git-dir was
only introduced later (even if most distros ship an later version),
as suggested by Arnout.
Also fix the one call to git that was not using the wrapper.
Reported-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Tested-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some files were missing on the first build of qt53d but added later:
- by qt5base for the plugins because it copies the whole /usr/lib/qt/plugins
directory
- by qt5declarative for the QML modules because it copies the whole
/usr/qml directory
Also, the qt53d examples were not installed if
BR2_PACKAGE_QT5BASE_EXAMPLES was set.
Signed-off-by: Romain Reignier <rom.reignier@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Following commit cdb7876f63
("linux-firmware: add Qualcomm video accelerator and GPU firmware
options"), LINUX_FIRMWARE_DIRS can now contain entries with subdirs,
such as "qcom/venus-1.8". Such entries are currently not supported by
the logic in LINUX_FIRMWARE_INSTALL_DIRS.
Indeed the current logic consists in:
- Removing the destination directory
- Copying to the destination directory
Unfortunately, the last step fails if a component of the path leading
to the destination directory does not exist. To overcome this, we
simply add the appropriate mkdir before the copy.
Fixes:
http://autobuild.buildroot.net/results/54cbca90742faf486e59d95b95a0b0494e47b385/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. Buildroot installs both abrmd and its init
script as part of the same package. But if it ever happens for some
reason, the error message from start-stop-daemon should be pretty clear.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the NETWORKMANAGER_BIN variable, which was used only once, by
the full path of the binary file.
Drop the now useless variables prefix, exec_prefix and sbindir.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Replace the DAEMON variable, which was used only once, by the full path
of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Drop the MODEMMANAGER_BIN variable, which was never initialized.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits with error code 5 if the
binary doesn't exist, which is silly. Buildroot installs both udevd and
its init script as part of the same package. But if it ever happens for
some reason, the error message "/sbin/udevd: No such file or directory"
in the start case should be pretty clear.
Replace the UDEV_BIN variable, which was used only once, by the full
path of the binary file.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The test doesn't make sense. It just exits without any error if the
binary doesn't exist, which is silly.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
sqlite3 refuses to be built with -ffast-math (a side effect of -Ofast) when it
falls back to implementing its own isnan() function.
sqlite3.c: In function ‘sqlite3IsNaN’:
sqlite3.c:28554:3: error: #error SQLite will not work correctly with the -ffast-math option of GCC.
To work around this, when -Ofast is used replace with -O3.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Blackfin architecture has for a long time been complicated to
maintain, with poor support in upstream binutils/gcc. As of April
2018, the Blackfin architecture has been dropped from the upstream
Linux kernel. Also, the Analog Device engineer who used to be in touch
with the Buildroot community also privately said we should drop the
support for this architecture, which Analog Devices is no longer
using, promoting and maintaining.
The BR2_BINFMT_FLAT_SEP_DATA option becomes unselectable, it will be
removed in a future commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As we are about to remove the Blackfin architecture, remove the only
defconfig that was using this CPU architecture.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Sometimes it is useful to pass some parameters to NetworkManager when it
starts (e.g. --log-level) instead of editting NetworkManager.conf. Allow
the user add a file with a NETWORKMANAGER_ARGS variable containing such
flags. This is simpler than overriding the whole startup script (e.g. by
means of a rootfs overlay).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove upstream patches:
* 0001-compat.h-introduce-compatibility-header.patch
* 0002-Fix-build-if-DOWNLOAD-is-set-but-no-JSON.patch
Update note about bundled modified version of mongoose 6.11.
Update licenses. Some files are LGPL-2.1+ now. Remove Public Domain as the
relevant bundled sqlite3 code was removed some time age.
Regenerated the .config file by doing:
```
make swupdate-menuconfig
make swupdate-update-config
```
.. and removing the paths for the build options manually.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Regenerate patches using git as patch 0002 didn't applu and the others
were fuzzy.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: fix authorship in patches, order of SoB and use git
format-patch -N to avoid numbering]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
configure.ac can fail the build when there's no dynamic library support,
since it cannot find dladdr which is needed only when we have libunwind.
Therefore, configure.ac was patched to check for dladdr only in the libunwind
check section. As a consequence of the patch, ZEROMQ_AUTORECONF was set.
The patch was applied to the zeromq master branch, see:
c971445025
Fixes:
http://autobuild.buildroot.net/results/2b1aaf7e35651f04a9e9d0269e49c1b0bd87ae29/
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build issues with MicroBlaze and PPC64 targets are fixed, and the
three patches are upstream.
Signed-off-by: Eugene Tarassov <eugene@largest.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pixie WPS is a C based tool to audit networks against so called "Pixie
Dust" attacks.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- fix license, it's GPL-3.0+
- use PREFIX= instead of prefix= to actually have an effect, and
install in /usr and not /usr/local
- remove reference to PIXIEWPS_SUBDIR, which was never defined, and
was not needed anyway]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For reproducible builds, SOURCE_DATE_EPOCH will be set to the git commit
date if it is not defined in the environment, but this was done by
explicitly using $(TOPDIR)/.git as the git repository, which would not
give the expected result if Buildroot had been put into a subdirectory
of another repository.
This commit removes that restriction, meaning that the default date will
now be the date of the git commit that contains Makefile, regardless of
what level above Makefile the repository is at. This works because the
current directory when the 'git log' command is executed will always be
the directory containing Makefile (it must be, since TOPDIR is set from
CURDIR).
In general this should be a sensible default, and in cases where a
different date is required SOURCE_DATE_EPOCH can be defined in the
environment before invoking make.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The freescale p1025twr and t1040d4rdb defconfigs use a 4.15 series kernel;
specify BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_15 accordingly.
This fixes the following build error:
Incorrect selection of kernel headers: expected 4.16.x, got 4.15.x
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit bumps ARC toolchain to arc-2018.03-rc1.
We want to test how new toolchain-rc1 builds packages,
so we can make fixes before release of toolcain.
ARC GNU tools of version arc-2018.03-rc1 bring some quite significant changes like:
* Binutils v2.29.51 with additional ARC patches
* GCC 7.3.1 with additional ARC patches
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patch.
Add a patch for fixing static build.
Add license information about the newly introduced libbtrfsutil.
Disable the libbtrfsutil python binding. It does not cross compile
nicely.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
${raw_name} is never defined in dl-wrapper, and therefore the value
passed to the -N option is always empty. This causes a problem for the
'cvs' backend, which uses the value of this option as the CVS module
to be downloaded.
If the name of the CVS module is omitted, all the CVS modules from
that CVS repository are downloaded, which creates a tarball with a lot
more contents, and the actual useful contents in a sub-directory,
obviously breaking patches that should be applied, and the entire
build process that follows.
Fixes:
http://autobuild.buildroot.net/results/fcee0e3d7eeeb373313b1794092c729b1b052348/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit makes the common post-image.sh script used by Freescale
platforms compatible with arm64:
- Support having DTBs in sub-folders
- Support a kernel image in the 'Image' format
Signed-off-by: Erik Larsson <karl.erik.larsson@gmail.com>
Signed-off-by: Christopher Dahlberg <crille.dahlberg@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reaver is a tool to audit networks against brute WPS pins attacks.
We use the github.com/t6x fork at the moment because other
versions/repos of this project won't cross-compile, and this fork is
the only one regularly updated and maintained.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a bugfix release. It contains the following changes since v1.0:
- include Doxyfile in the release tarball
- fix the implicit-fallthrough warnings
- make tests work together with gpio-mockup post v4.16 linux kernel
- use reference counting for line file descriptors to avoid calling
close() on the same descriptors multiple times
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
"+=" was missing in -DLLVM_TARGETS_TO_BUILD, so LLVM_CONF_OPTS and
HOST_LLVM_CONF_OPTS before this option weren't being considered.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The /lib/firmware directory contains random firmware for various
devices. It happens that some of them might be or appear to be ELF
files, but they shouldn't be checked by fix-rpath. For example, one of
the Qualcomm VPU firmware file appears to be an ELF file, but patchelf
isn't happy about it:
$ ./output/host/bin/patchelf --print-rpath output/target/lib/firmware/qcom/venus-4.2/venus.b00
patchelf: patchelf.cc:387: void ElfFile<Elf_Ehdr, Elf_Phdr, Elf_Shdr, Elf_Addr, Elf_Off, Elf_Dyn, Elf_Sym>::parse() [with Elf_Ehdr = Elf32_Ehdr; Elf_Phdr = Elf32_Phdr; Elf_Shdr = Elf32_Shdr; Elf_Addr = unsigned int; Elf_Off = unsigned int; Elf_Dyn = Elf32_Dyn; Elf_Sym = Elf32_Sym]: Assertion `shstrtabIndex < shdrs.size()' failed.
Aborted (core dumped)
Even though patchelf definitely shouldn't crash, it anyway doesn't
make sense to check ELF files in /lib/firmware, so let's exclude this
directory from our check.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
AddLLVM.cmake adds $ORIGIN/../lib to the RPATH of llvm binaries. This
causes a problem when llvm-config built for the host, installed in
STAGING_DIR, is executed under the following conditions:
* Target architecture same as host architecture (normally x86_64)
* Target's libc different from host's libc (normally glibc)
llvm-config will try to link with the target's libc, resulting in:
./llvm-config: error while loading shared libraries: libc.so.0: cannot open shared object file: No such file or directory.
To avoid this, we simply add pass
-DCMAKE_INSTALL_RPATH="$(HOST_DIR)/lib" in HOST_LLVM_CONF_OPTS.
Link to discussion:
http://lists.busybox.net/pipermail/buildroot/2018-April/218627.html
Fixes:
http://autobuild.buildroot.net/results/b81c12d529c66a028e2297ea5ce1d6930324fa69/
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license is GPL-3.0+, not GPL-3.0. Indeed all source files have the
mention:
"either version 3 of the License, or (at your option) any later version"
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The Zynq SoCs are now well supported in the mainline kernel, thus stop
using the Xilinx fork.
As there is not xilinx_zynq defconfig in mainline, use the default
arch config.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Extract from log:
output/build/llvm-5.0.1/include/llvm/Support/ConvertUTF.h:203:53:
error: ‘std::wstring’ has not been declared
bool ConvertUTF8toWide(llvm::StringRef Source, std::wstring &Result);
Also propagate dependency to mesa3d
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If SOURCE_DATE_EPOCH is not defined it was given a definition that
caused 'git log' to be executed each time the variable is referenced,
which is not very efficient given that the answer cannot change.
This commit moves the definition of BR2_VERSION_GIT_EPOCH after the
inclusion of Makefile.in (so that GIT is defined) and makes it a
simply expanded variable so that it is only evaluated once.
Signed-off-by: James Byrne <james.byrne@origamienergy.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-1000156: arbitrary command execution in ed-style patches.
Depend on MMU for now, because the patch adds a fork() call. Upstream
later switched to gnulib provided execute(), so this dependency can be
dropped on the next version bump.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As of Linux-4.15, cramfs now has a official maintainer again.
Additionally, that person is hosting and maintaining a new version of
cramfs-tools.
Patches 0001-endian.patch and 0003-fix-missing-types.patch are no longer
needed because they have been upstreamed.
However, since patch 0002-cygwin_IO.patch is so old, it is being
removed until someone that needs it can reapply and test it. At
that point, they should submit the changes to the new cramfs-tools
maintainer instead of adding the patches back here.
Please note that cross-endian support for cramfsck is not supported
at this time.
Cc: Nicolas Pitre <nico@linaro.org>
Signed-off-by: Chris Brandt <chris.brandt@renesas.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit f66952197b ("package/gcc:
remove gcc 4.8"), UCLIBC_EXTRA_CFLAGS no longer exists, and is
therefore always empty.
Passing the Buildroot make variable UCLIBC_EXTRA_CFLAGS into the
UCLIBC_EXTRA_CFLAGS fed into uClibc's make environment therefore no
longer makes sense. Therefore, just pass $(TARGET_ABI).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HOST_GCC_COMMON_WRAPPER_TARGET_FLOAT_ABI variable was incorrectly
used as HOST_GCC_COMMON_WRAPPER_TARGET_FLOATABI_, which would always
be empty.
In practice, this block of code is only used on Blackfin (which has
BR2_GCC_ARCH_HAS_CONFIGURABLE_DEFAULTS unset) and Blackfin doesn't use
float-abi, so this block of code is in fact useless. But even if it's
useless, it's better to have it without typos.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit d879be3049 enabled the build for non-glibc
toolchains and added a patch from upstream to fix one remaining build issue
with musl.
The upstream patch defines the glibc specific macro `__GLIBC_PREREQ` in
`include/bsd/sys/cdefs.h`, but the patch does not include this header
file in `include/bsd/stdlib.h` which uses the macro.
Upstream did committed an earlier patch which adds this header inclusion
to `include/bsd/stdlib.h`. So, add this upstream patch as well to fix a
build error when building the hcitop tool from the not yet added package
bluez-alsa.
Note, that the upstream patch address the issue that `<sys/cdefs.h>` is
a non-portable header. However, this is not the issue which needs to be
fixed by this patch, but solely the needed inclusion of the
`include/bsd/stdlib.h` header file, to see the definition of
`__GLIBC_PREREQ`.
Backported from: 11ec8f1e5dfa1c10e0c9fb94879b6f5b96ba52dd
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
zend_alloc.h defines some macros such as:
Where _estrdup is the actual function implemented by the PHP core. If
this header file is not included, and some code uses estrdup, one ends
up with an undefined reference. This happens when libexpat support is
enabled. This commit adds a PHP patch that fixes this issue. The patch
has been submitted upstream through a Github pull request.
Fixes:
http://autobuild.buildroot.net/results/889d2c1f509c035cd506e36061939bfddc8f1500/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Security fixes since 2.2.12:
- wnpa-sec-2018-15
The MP4 dissector could crash. (Bug 13777)
- wnpa-sec-2018-16
The ADB dissector could crash. (Bug 14460)
- wnpa-sec-2018-17
The IEEE 802.15.4 dissector could crash. (Bug 14468)
- wnpa-sec-2018-18
The NBAP dissector could crash. (Bug 14471)
- wnpa-sec-2018-19
The VLAN dissector could crash. (Bug 14469)
- wnpa-sec-2018-20
The LWAPP dissector could crash. (Bug 14467)
- wnpa-sec-2018-23
The Kerberos dissector could crash. (Bug 14576)
- wnpa-sec-2018-05
The IEEE 802.11 dissector could crash. Bug 14442, CVE-2018-7335
- wnpa-sec-2018-06
Multiple dissectors could go into large infinite loops. All ASN.1 BER dissectors (Bug 14444), along with the DICOM (Bug 14411), DMP (Bug 14408), LLTD (Bug 14419), OpenFlow (Bug 14420), RELOAD (Bug 14445), RPCoRDMA (Bug 14449), RPKI-Router (Bug 14414), S7COMM (Bug 14423), SCCP (Bug 14413), Thread (Bug 14428), Thrift (Bug 14379), USB (Bug 14421), and WCCP (Bug 14412) dissectors were susceptible.
- wnpa-sec-2018-07
The UMTS MAC dissector could crash. Bug 14339, CVE-2018-7334
- wnpa-sec-2018-09
The FCP dissector could crash. Bug 14374, CVE-2018-7336
- wnpa-sec-2018-10
The SIGCOMP dissector could crash. Bug 14398, CVE-2018-7320
- wnpa-sec-2018-11
The pcapng file parser could crash. Bug 14403, CVE-2018-7420
- wnpa-sec-2018-12
The IPMI dissector could crash. Bug 14409, CVE-2018-7417
- wnpa-sec-2018-13
The SIGCOMP dissector could crash. Bug 14410, CVE-2018-7418
- wnpa-sec-2018-14
The NBAP disssector could crash. Bug 14443, CVE-2018-7419
Full release notes:
https://www.wireshark.org/docs/relnotes/wireshark-2.2.14.html
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the ZEROMQ_SITE with the active repository.
Remove the two patches because they were both applied on zeromq.
As a result, the ZEROMQ_AUTORECONF was removed.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since the bump of libglib2 to 2.56.0, it fails to build on uClibc with:
gthreadedresolver.c: In function 'do_lookup_records':
gthreadedresolver.c:875:16: error: 'res' undeclared (first use in this function); did you mean '_res'?
res_nclose (&res);
^~~
_res
This commit adds an upstream patch that fixes this problem.
Fixes:
http://autobuild.buildroot.net/results/990e19e3500986263f99354215e33214a2e89116/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a required component to complete the configuration. It also makes sense
to add ubifs so that this board can be flashed with the board/atmel/flasher.sh
script.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support to the flasher.sh script for the at91sam9260-ek board which
complements the existing at91sam9260eknf_defconfig.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This improve the reproducible build.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: mention the libunwind dependency as being needed for 'strace
-k' in the Config.in help text, as suggested by Thomas De
Schampheleire.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Include BCM4345C0.hcd for the rpi3 b+
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: rebase on master, use make foreach loop instead of shell for
loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't list specific dtb files, instead install all dtb files in the same
way as dtbo files are currently done.
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: use make foreach loop instead of shell for loop.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now based on 4.14.29 (from 4.9.79)
Signed-off-by: Martin Bark <martin@barkynet.com>
[Thomas: adjusted on top of Yann E. Morin changes to use a tarball
instead of a git clone.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains a kernel module from Intel, which could only be
used together with Intel userspace tools provided under NDA, which
also come with the same kernel module. The copy of the kernel module
available on SourceForge is only provided to comply with the GPLv2
requirement. Intel engineers were even surprised it even built and
were not willing to make any effort to fix their tarball naming to
contain a version number. Therefore, it does not make sense for
Buildroot to provide such a package.
See https://sourceforge.net/p/e1000/bugs/589/ for the discussion.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: Carlos Santos <casantos@datacom.ind.br>
Acked-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- remove double "only" noticed by Carlos
- fix typo packaged -> package noticed by Romain
- fix check-package warning noticed by Ricardo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Instead of using the install of sam-ba under host/opt directly, use the symlink
created in host/bin. The side effect of doing this instead allows the correct
sam-ba binary to be used based on the host arch being 32 bit or 64 bit.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump sama5d3xek to linux4sam_5.8. The 3 foundation components have their tags
changed (AT91Bootstrap, U-Boot, Linux kernel). This requires bumping the kernel
header version and u-boot dtc as well.
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the internal PCRE library of PHP is used, it tries to use a JIT
engine, which is only available on some architectures.
However, the mechanism used to disable JIT has changed in recent PHP
versions, and it now has a proper --without-pcre-jit option. Switch
over to that to properly disable JIT on unsupported platforms.
It has been tested to fix the build of PHP on ARC and Microblaze.
Fixes:
http://autobuild.buildroot.net/results/e1359fcad7bc57e3c5a7ecc37abaa2cf6a6a9ffa/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since c8ef0c03b0 (download: put most of the infra in dl-wrapper), the
backend for local files is now named after the scheme, which is 'file'
for a local file.
>From the same commit on, the directory part and the basename are now
passed separately, to let the backend reconstruct the full path when it
needs to do so, which is the case for the 'file' backend too.
Finaly, ff559846fd (support/download: Add support to pass options
directly to downloaders) introduced a nasty error, as it made use of
"${@}" when calling its internal function. Revert that mess now...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the _LICENSE and _LICENSE_FILES variables, that were mistakenly
created with PYTHON_JSONMODELS instead of PYTHON_YIELDFROM
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We can drop 0001-Fix-build-with-Linux-kernel-headers-v4.15.patch as it
has been merged upstream, as of commit
a5457d3a1f.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kexec works fine on aarch64, so allow selecting it on that architecture.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Psycopg is the most popular PostgreSQL database adapter for the Python
programming language. Its main features are the complete implementation of the
Python DB API 2.0 specification and the thread safety (several threads can
share the same connection). It was designed for heavily multi-threaded
applications that create and destroy lots of cursors and make a large number of
concurrent INSERTs or UPDATEs.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_POSTGRESQL option depends on BR2_USE_MMU, so the
Config.in comment about the dynamic library dependency should only be
displayed if the BR2_USE_MMU requirement is met.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes
http://autobuild.buildroot.net/results/734/7342b25f01d60cafc4a5422a5a1c282629f361c5/
$(dir does not strip last path separator and the wget wrapper adds a '/'
between the -u argument and the filename when it reconstructs the URL,
leading us to have two slashes before the filename when accessing the
upstream location.
Most upstream servers ignores this, but not all - Leading to download issues
from pypi.
Notice: As pointed out by Arnout, we cannot simply use $(PKG)_SITE here as
_PATCH and _EXTRA_DOWNLOADS may contain full URLs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit "6d938bcb52 download: git: introduce cache feature" introduced a
typo that makes the tarball to contain files without the package
basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0 8 2017-10-14 02:10 ./file
Historically, all tarballs are generated with the basename:
$ tar -tvf good-a238b1dfcd825d47d834af3c5223417c8411d90d.tar.gz
-rw-r--r-- 0/0 8 2017-10-14 02:10 good-a238b1dfcd825d47d834af3c5223417c8411d90d/file
The hashes in the tree were calculated with the basename.
In the most common scenario, after the download ends the tarball is
generated, the hash mismatches and the download mechanism falls back to
use the tarball from http://sources.buildroot.net .
The problem can be reproduced by forcing the download of any git package
PKG that has a hash file to check against:
$ make defconfig
$ ./utils/config --set-str BR2_BACKUP_SITE ""
$ BR2_DL_DIR=$(mktemp -d) make PKG-dirclean PKG-source
Fix the typo so the basename is really added to the files, that was
clearly the intention of the code.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only one of the two can be selected (they are conflicting virtual
packages) so testing against a single 'y' is enough.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: add sunxi-mali and sunxi-mali-mainline in a single patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Setting EGLFS_DEVICE_INTEGRATION at the end of qmake.conf like is done
by commit 0c219ddb8a doesn't work correctly: it has to be set before the
include(../common/linux_device_post.conf)
Instead of appending to the file, change it into a qmake.conf.in
template file that contains a placeholder for the
EGLFS_DEVICE_INTEGRATION assignment and update it with sed. Since the
sed always has to be executed, this removes the need for a separate
QT5BASE_CONFIGURE_QMAKE_CONFIG definition.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
[Arnout: simplify the replacement, move sunxi-mali support to a
separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some external packages call pg_config to determine the installed PostgreSQL
version. Add this output to Buildroots own pg_config, so these packages
correctly compile.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>From the changelog:
2018-02-28 0.39
* Fixed a security issue with the form module (tx Orange Tsai)
* Fixed a security issue with the db module (tx Adrián Brav and Orange Tsai)
2016-07-08 0.38
..
* Fixed a potential remote exeution risk in `reparam` (tx Adrián Brav)
License files are still not included on pypi, so continue to use the git
repo. Upstream has unfortunately not tagged 0.39, so use the latest commit
on the 0.39 branch. A request to fix this has been submitted:
https://github.com/webpy/webpy/issues/449
0.39 now uses setuptools, so change the _SETUP_TYPE.
Add hashes for the license files.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
webpy uses hashlib for session handling, so ensure it is available:
web/session.py: import hashlib
web/session.py: sha1 = hashlib.sha1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch provides LLVM support for Mesa3D, enabling llvmpipe
software rasterizer if Gallium swrast is selected.
In case Gallium r600 is selected, llvm AMDGPU backend is built.
Having llvm installed also enables radeonsi Gallium driver, but
it is not provided with this patch as it hasn't been tested.
It uses llvm-config (host variant) installed in STAGING_DIR/usr/bin
to get LLVM libraries. Assuming that LLVM version 5.0.1 is installed,
llvm-config --libs will output -lLLVM-5.0.
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
Tested-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch installs LLVM tools and libraries for the host and
libLLVM.so for the target.
In order to cross-compile LLVM for the target, LLVM
must be installed on the host, or at least llvm-tblgen.
This is necessary as the path to host's llvm-tblgen must
be specified when cross-compiling using the LLVM_TABLEGEN option.
Also, a version of llvm-config that can run on the host will
be required by packages that link with LLVM libraries, so we
need to generate it and install it in STAGING_DIR/usr/bin.
It is important to remark why we need llvm-config(host variant)
installed in STAGING dir. This tool is necessary to build
applications that use LLVM, as it prints the compiler flags,
linker flags and object libraries needed to link against LLVM libs.
More info: https://bugs.chromium.org/p/chromium/issues/detail?id=219369
The original idea was to compile only llvm-tblgen and llvm-config
for the host, as they are the only necessary components. However,
llvm-config tool does not work as expected if it is not linked with
libLLVM.so, so we must also enable LLVM_LINK_LLVM_DYLIB, what builds
LLVM as a single shared library and links LLVM tools with it.
More info: https://bugs.freebsd.org/bugzilla/show_bug.cgi?id=224847
in comment #11.
If we don't build full LLVM for the host, it would be necessary to
patch configure.ac from mesa3d if we want dynamic linking, because it
uses llvm-config (host variant installed in STAGING_DIR) to get the
necessary LLVM libraries to link with, which has the following problems:
- llvm-config --shared mode outputs static (even if LLVM is built as
one shared library) which leads to link issues with libgallium.
- llvm-config --libs outputs all LLVM tiny libs: -lLLVMLTO,
-lLLVMPasses,etc instead of the single shared library containing
all LLVM components (-lLLVM-5.0)
Mesa tries to execute: llvm-config --link-shared --libs, but this outputs
llvm-config: error: libLLVM-5.0.so is missing.
Given that these problems may arise with other packages that use LLVM,
it is preferable to do a full build for the host. Also, having a
complete installation of LLVM on the host will also facilitate the
integration of Clang front-end, which is going to be added in a future
patch.
As option LLVM_BUILD_LLVM_DYLIB is enabled for the llvm target variant,
a single shared library containing all LLVM components is built.
This option is not compatible with BUILD_SHARED_LIBS, which generates
one .so per library and is only recommended for use by LLVM developers.
Tools and utils are not built for the target. The patch aims to provide
LLVM support for other packages.
The main options needed to cross-compile LLVM are the following ones:
LLVM_TABLEGEN
CMAKE_CROSSCOMPILING
LLVM_DEFAULT_TARGET_TRIPLE
LLVM_HOST_TRIPLE
LLVM_TARGET_ARCH
LLVM_TARGETS_TO_BUILD
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas:
- add dependency on thread and C++ and update the Config.in comment
accordingly.
- make the Config.in comment depend on BR2_PACKAGE_LLVM_ARCH_SUPPORTS
so that it isn't disabled on architectures where LLVM is anyway not
supported.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new column in the HTML output containing the
current version of a package in Buildroot. As such, it isn't terribly
useful, but combined with the latest upstream version added in a
follow-up commit, it will become very useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds the following options to the pkg-stats-new script:
-n, to specify a number of packages to parse instead of all packages
-p, to specify a list of packages (comma-separated) to parse instead
of all packages
These options are basically only useful when debugging/developing
this script, but they are very useful, because the script is rather
slow to run completely with all 2000+ packages, especially once
upstream versions will be fetched from release-monitoring.org.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a new version of the pkg-stats script, rewritten in
Python. It is for now implemented in a separate file called,
pkg-stats-new, in order to make the diff easily readable. A future
commit will rename it to pkg-stats.
Compared to the existing shell-based pkg-stats script, the
functionality and output is basically the same. The main difference is
that the output no longer goes to stdout, but to the file passed as
argument using the -o option. This allows stdout to be used for more
debugging related information.
The way the script works is that a first function get_pkglist()
returns a list of Package objects. Then, the function
package_init_make_info() uses 'make printvars' to gather information
about all packages, stored as class variables in the Package
class. Then, we iterate over all packages, and use various methods of
the Package class to retrieve all details about the package:
infrastructure, presence of hash file, presence of license
information, etc.
calculate_stats() then calculates global statistics (how packages have
license information, how packages have a hash file, etc.). Finally,
dump_html() produces the HTML output, using a number of sub-functions.
One improvement over the shell-based version is that we can use
regexps to exclude some .mk files. Thanks to this, we can exclude all
linux-ext-*.mk files, avoiding incorrect matches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Drop patch 0004 as it is already applied upstream.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the BR2_DL_DIR is a mountpoint (presumably shared between various
machine, or mounted from the local host when running in a VM), it is
possible that it does not support hardlinks (e.g. samba, or the VMWare
VMFS, etc...).
If the hardlink fails, fallback to copying the file. As a last resort,
if that also fails, eventually fallback to doing the download.
Note: this means that the dl-wrapper is no longer atomic-safe: the code
suffers of a TOCTTOU condition: the file may be created in-between the
check and the moment we try to ln/cp it. Fortunately, the dl-wrapper is
now run under an flock, so we're still safe. If we eventually go for a
more fine-grained implementation, we'll have to be careful then.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit 514291f39e (packages: use new $($PKG)_DL_DIR) variable) strangely
enough removed the PYTHON_KEYRING_SITE line, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/b4a/b4af0de4ae9630ccbe7890f69047f216f2ff5119/
With the change to the DOWNLOAD macro, packages using FOO_ACTUAL_SOURCE_TARBALL fails:
>>> skeleton-init-common Collecting legal info
sourceryg++-2017.05-4-nios2-linux-gnu.src.tar.bz2: OK (md5: 529a7fecf33d0d113a446413b9d1e173)
sourceryg++-2017.05-4-nios2-linux-gnu.src.tar.bz2: OK (sha256: 6e65878d0453708ee19098d3d68985bda244938d35999f3859915a2f5574fa08)
/bin/bash: line 1: @mkdir: command not found
package/pkg-generic.mk:148: recipe for target '/accts/mlweber1/rclinux/rc-buildroot-test/scripts/instance-1/output/build/toolchain-external-codesourcery-niosII-2017.05-4/.stamp_actual_downloaded' failed
Which is caused by the continuation character '\'. This has been present
since the make target was introduced in commit eace9d6133
(core/legal-info: ensure legal-info works in off-line mode). It isn't clear
to me why it was done like that, but it fails with the DOWNLOAD macro
rework, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A backport of the `yield from` semantic from Python 3.x to Python 2.7.
Can be useful for both host and target packages.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The infrastructure only provides HOST_ZYNQ_BOOT_BIN_DL_DIR, because this
package is host only. Ideally the infra should provide ZYNQ_BOOT_BIN_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_TI_CGT_PRU_DL_DIR, because this
package is host only. Ideally the infra should provide TI_CGT_PRU_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_RUST_BIN_DL_DIR, because this
package is host only. Ideally the infra should provide RUST_BIN_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_CRYPTOPP_DL_DIR, because this
package is host only. Ideally the infra should provide CRYPTOPP_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The infrastructure only provides HOST_CARGO_DL_DIR, because this
package is host only. Ideally the infra should provide CARGO_DL_DIR,
but it doesn't currently, and that requires more significant changes.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If one runs "make host-sam-ba" from a clean build, sam-ba.mk cannot
create its symbolic link because $(HOST_DIR)/bin doesn't exist. So
let's create this directory.
>>> host-sam-ba 2.16 Installing to host directory
mkdir -p /buildroot/output/host/opt/sam-ba/
cp -a /buildroot/output/build/host-sam-ba-2.16/* /buildroot/output/host/opt/sam-ba/
ln -sf ../opt/sam-ba/sam-ba_64 /buildroot/output/host/bin/sam-ba
ln: failed to create symbolic link '/buildroot/output/host/bin/sam-ba': No such file or directory
make[1]: *** [package/pkg-generic.mk:234: /buildroot/output/build/host-sam-ba-2.16/.stamp_host_installed] Error 1
make: *** [Makefile:79: _all] Error 2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to hostapd's defconfig file, ACS is currently only supported
through the nl80211 driver. Search through the source code also confirms
that ACS machinery is present in the nl80211 driver only.
Although hostapd can be built with ACS enabled and nl80211 disabled, an
attempt to use ACS with other drivers by setting a wireless channel to 0
results in a runtime failure (driver doesn't accept this value). So we
might save a user from selecting a meaningless combination by making ACS
dependent on nl80211.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for the wired driver. Add configuration options to select
which drivers to build. Select DRIVER_NONE if no other drivers enabled
(this may be the case when building hostapd as a standalone RADIUS
server).
Update makefile logic and apply wireless-specific options only if at
least one wireless driver enabled. Otherwise, an attempt to build a
wired-only or RADIUS-only hostapd will fail.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now we keep the git clone that we download and generates our tarball
from there.
The main goal here is that if you change the version of a package (say
Linux), instead of cloning all over again, you will simply 'git fetch'
from the repo the missing objects, then generates the tarball again.
This should speed the 'source' part of the build significantly.
The drawback is that the DL_DIR will grow much larger; but time is more
important than disk space nowadays.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For existing setups, the global donload directory may have a lot of the
required archives, so look into there before attempting a download.
We simply hard-link them if found there and not in the new per-package
loaction. Then we resume the existing procedure (which means the new
hardlink will get removed if it happened to not match the hash).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The infrastructure needs to give the 'dl_dir' to the dl-wrapper which in its
turn needs to give it to the helper. It will only be used by the 'git'
helper as of now.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to introduce the cache mechanisms, we need to have a lock on the
$(LIBFOO_DL_DIR), otherwise it would be impossible to do parallel download
(a shared DL_DIR for two buildroot instances) without risking conflicts.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we introduced subdirectories to the DL_DIR, we need to support them
in the PRIMARY and BACKUP mirrors as they evolve to the new tree
structure.
We check first the new URI (with the subdir), and in case of failure, we
check without. By checking both URIs, we ensure that old mirror are usable.
Also, add a missing qstrip call for BR2_BACKUP_SITE.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This per package variable can be used to specify the download
subdirectory used by that package.
The use case here is for example linux-headers and linux, which share
the same sources (because they are the same upstream project), so we
don't want to download twice the kernel, nor store it multiple times
either.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With all the previous changes, we are now ready to add a subdirectory to
the DL_DIR.
The structure will now be DL_DIR/PKG_NAME/{FILE1,FILE2}
This is needed for multiple reasons:
- Avoid patches with name like SHA1.patch laying flat in DL_DIR,
which makes it hard to know to which packages they apply
- Avoid possible collisions if two releases have the same name
(e.g: v01.tar)
- Allow the possibility to handle a git cache per package in the
newly created subdirectory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to Linux kernel version 4.9.59 from the TI SDK 04.02.00.09
(TI SDK release date: 23.12.2017)
Updated uboot to version 2018.01
uEnv.txt corrected to boot from sd card on the ti-am335x-evm
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tarball filename has changed since 5.10. The module suffix
*opensource-src* has changed to *everywhere-src*. I introduced the
*QT5_SOURCE_TARBALL_PREFIX* variable to set the right filename according
to the Qt version.
qtwebengine:
Select libnss. It is a requirement[1] because OpenSSL
certificate validation[2] and NSS bundle[3] was dropped.
Add host-libnss and host-libpng to satisfy new requirement to
build an internal host-tool.
Set ninja host pkg-config tool using environment variable
$GN_PKG_CONFIG_HOST[4]. The build system uses pkg-config to get
package data for both host and target architectures. Using the
same call to pkg-config for both target and host leads to build
mismatches: it tries to link a host-tool using target libraries.
qt5base:
sqlite plugin now uses sqlite3_column_table_name16() so select
BR2_PACKAGE_SQLITE_ENABLE_COLUMN_METADATA to make sure it is
available.
qt5multimedia:
libqgsttools was renamed to libQtMultimediaGstTools. The latter
name matches the libQt5Multimedia*.so.* pattern so no additional
copy command is needed for it anymore.
qt5xmlpatterns:
Names of the license files have changed: LICENSE.(L)GPLv3 ->
LICENSE.(L)GPL3. The new files in fact already existed in 5.9.4
but the old ones were not removed yet. The new files are
slightly different: there used to be a Qt header in front of it
which is now removed. Also LICENSE.LGPL3 is rewrapped.
qt5location, qt5quickcontrols, qt5serialport:
Same license files issue, and for LICENSE.GPLv2 as well.
LICENSE.GPL2 has the "How to Apply These Terms to Your New
Programs" text appended to it.
qt5script:
Similar license file issues, but the new license files were not
present yet. LICENSE.GPLv21 was removed so there is no longer a
license file for the LGPL-2.1-covered Qt code.
[1]: 9b449045fb
[2]: https://codereview.chromium.org/2862543003
[3]: https://codereview.chromium.org/1882433002
[4]: https://github.com/qt/qtwebengine/blob/v5.10.1/src/core/config/linux.pri#L111-L125
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Peter:
- fix sqlite plugin support in qt5base;
- fix target installation of qt5multimedia
]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Arnout:
- create a local host-pkg-config tool instead of extending pkgconf;
- pass the same options to host-pkg-config as we do for other packages;
- carry the EGL mesa3d X11 headers patch;
- update license file names and hashes
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The license information in qt5script was just copied from all the other
qt5 modules, but it is different (and complicated).
- libQt5Script itself contains the third-party JavaScriptCore source.
JavaScriptCore has a number of licenses: BSD-2-Clause, BSD-3-Clause,
LGPL-2.0+, LGPL-2.1+. Since it is all linked together, the end
result will be BSD-3-Clause and LGPL-2.1+.
The different BSD licenses are all slightly different (different
authors, which affects the third clause in particular). Only one
separate license file is provided, so let's use that one.
There is an LGPL-2.0 license file, which is slightly different from
the top-level LICENSE.LGPLv21, so let's add that one as well.
- libQt5Script also contains Qt-specific code which is all licensed
under LGPL-2.1 only. This is covered by the LICENSE.LGPLv21 file.
It merges with the LGPL-2.1+ from JavaScriptCore but limits it to
2.1 only.
- libQt5ScriptTools is a separate libary containing just the script
debugger. It is covered by the usual Qt license:
* LGPL-2.1 or LGPL-3.0 with exception for Qt 5.6;
* LGPL-3.0 or GPL-2.0+ for Qt 5.9 (actually it is GPL-2.0 or GPL-3.0
or any later version approved by the KDE Qt foundation, but let's
keep it simple :-). Note that there is no LICENSE.GPLv2 provided,
only LICENSE.GPLv3. Also, there is an LGPL_EXCEPTION.txt file but
no mention of an exception anywhere in the sources.
Update the license information with all of the above. Also add hashes
for the new license files from JavaScriptCore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
At the moment, it means that we make sure that BR2_DL_DIR is created, in
the future, it will make sure that BR2_DL_DIR/PKG_NAME/ is created.
[Peter: drop trailing / on mkdir]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of DL_DIR, the package should now use $(PKG)_DL_DIR to ease the
transition into a new directory structure for DL_DIR.
This commit has been generated with the following scripts:
for i in $(find . -iname "*.mk"); do
if ! grep -q "\$(DL_DIR)" ${i}; then
continue
fi
pkg_name="$(basename $(dirname ${i}))"
[ "${pkg_name}" = "package" ] && continue
raw_pkg_name=$(echo ${pkg_name} | tr [a-z] [A-Z] | tr '-' '_')
pkg_dl_dir="${raw_pkg_name}_DL_DIR"
sed -i "s/\$(DL_DIR)/\$($pkg_dl_dir)/" ${i}
done
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some arguments can be empty, so we need to add single quote around them
But since they are sinple quote; double quote inside them are now not
interpreted by the shell and as such must be removed; hence the use of
qstrip.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The forthcoming "libvirt" package will need a "nc" command with support
for Unix domain sockets in order to permit remote management using the
virt-manager utility. netcat-openbsd provides such command but requires
glibc, so we would not have remote management on uClibc-based systems.
Ncat is a much-improved reimplementation of the venerable Netcat and is
compatible with uClibc and musl. It provides features not available in
the ancient GNU netcat and its Busybox double like IPv6, proxies, and
Unix sockets.
Since 'nmap' itself is a fairly big program (~2.3 MB), we want to be
able to install only ncat. In addition, nmap requires an external
library, pcre.
So this commit adds sub-options to selectively enable/disable the
different programs part of nmap: nmap, nping, ndiff and ncat.
Finally, we symlink 'nc' to ncat if neiter netcat nor netcat-openbsd
is selected, even though ncat does not have the same interface as
netcat-openbsd. However, since Fedora/RHEL install nmap-ncat as 'nc',
it can be assumed that packages that depend on 'nc' know how to deal
with this diversity. For example, the virt-manager package does
that. Also user-supplied scripts can be assumed to do the right thing,
since the user also selects whether nmap-ncat, netcat or
netcat-openbsd is installed.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- don't just handle the ncat case in a special way: create
sub-options for all nmap tools, and use <pkg>_MAKE_OPTS and
<pkg>_INSTALL_TARGET_OPTS to select which ones should be
built/installed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/b18/b187e64a61918f17f69588e2355a03286bc5808e
tar 1.27 subtly changed the tar format when a GNU long link entry is added
(which is done for path elements > 100 characters). The code used to set
the permission mode of the link entry to 0:
header = start_private_header ("././@LongLink", size, time (NULL));
FILL (header->header.mtime, '0');
FILL (header->header.mode, '0');
FILL (header->header.uid, '0');
FILL (header->header.gid, '0');
FILL (header->header.devmajor, 0);
FILL (header->header.devminor, 0);
This got dropped in 1.27 by commit df7b55a8f6354e3 (Fix some problems with
negative and out-of-range integers), so the settings from
start_private_header() are used directly - Which are:
TIME_TO_CHARS (t < 0 ? 0 : min (t, MAX_OCTAL_VAL (header->header.mtime)),
header->header.mtime);
MODE_TO_CHARS (S_IFREG|S_IRUSR|S_IWUSR|S_IRGRP|S_IROTH, header->header.mode);
UID_TO_CHARS (0, header->header.uid);
GID_TO_CHARS (0, header->header.gid);
The end result is that tar >= 1.27 sets mode to 644.
The consequence of this is that we create different tar files when long path
names are encountered (which often happens when a package downloads a
specific sha1 from a git repo) depending on the host tar version used,
causing hash mismatches.
As a workaround, bump our minimum tar version to 1.27. It would be nicer to
only do this if we have packages from bzr/git/hg enabled, but that is an
exercise for later.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The goal here is to simplify the infrastructure by putting most of the
code in the dl-wrapper as it is easier to implement and to read.
Most of the functions were common already, this patch finalizes it by
making the pkg-download.mk pass all the parameters needed to the
dl-wrapper which in turn will pass everything to every backend.
The backend will then cherry-pick what it needs from these arguments
and act accordingly.
It eases the transition to the addition of a sub directory per package
in the DL_DIR, and later on, a git cache.
[Peter: drop ';' in BR_NO_CHECK_HASH_FOR in DOWNLOAD macro and swap cd/rm
-rf as mentioned by Yann, fix typos]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently all download helpers accepts the local output file, the remote
locations, the changesets and so on... as positional arguments.
This was well and nice when that's was all we needed.
But then we added an option to quiesce their verbosity, and that was
shoehorned with a trivial getopts, still keeping all the existing
positional arguments as... positional arguments.
Adding yet more options while keeping positional arguments will not be
very easy, even if we do not envision any new option in the foreseeable
future (but 640K ought to be enough for everyone, remember? ;-) ).
Change all helpers to accept a set of generic options (-q for quiet and
-o for the output file) as well as helper-specific options (like -r for
the repository, -c for a changeset...).
Maxime:
Changed -R to -r for recurse (only for the git backend)
Changed -r to -u for URI (for all backend)
Change -R to -c for cset (for CVS and SVN backend)
Add the export of the BR_BACKEND_DL_GETOPTS so all the backend wrapper
can use the same option easily
Now all the backends use the same common options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From ReleaseNotes156:
"""
This is a bugfix release, but it primarily disables the UDP protocol by
default.
In the last few days reports of UDP amplification attacks utilizing
inesure memcached instances have surfaced. Attackers are able to set
large values into memcached, then send requests via spoofed UDP packets.
Memcached will then send a very large number of very large UDP packets
back in response.
"""
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The linux git trees on github can be huge, and takes a long time to
download, which is not very nice nor convenient for newcomers.
Switch them to using a wget, with the github macro.
A nice side effect of this conversion, is that we no longer need to wait
for the git clone to finish to notice that the ref is gone; doing a wget
will instantly fail in that case.
Mechanical patch, obtained by running (hang-on tight):
$ sed -r -i -e 's/BR2_LINUX_KERNEL_CUSTOM_GIT/BR2_LINUX_KERNEL_CUSTOM_TARBALL/; /BR2_LINUX_KERNEL_CUSTOM_REPO_URL/N; s:BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https\://github.com/([^/]+)/(.+)"\nBR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="(.+)":BR2_LINUX_KERNEL_CUSTOM_TARBALL_LOCATION="$(call github,\1,\2,\3)/linux-\3.tar.gz":; s/(call github.*)\.git/\1/;' $(grep -l 'BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://github.com' configs/*)
olimex_a20_olinuxino_lime_mali had a comment in between, so it was
manually fixed thereafter; that comment was also moved.
Except for socrates_cyclone5 which did not work previously (missing tag
in git tree?), all the affected defconfigs still download their sources.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch 0001, a different version was applied upstream, please
see upstream PR 82 for details. Added license hash.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is really annoying since the archive name doesn't contain
the version (iqvlinux.tar.gz), so we have added an
iqvlinux-1.2.0.3.tar.gz tarball on sources.buildroot.net. The package
will try to download iqvlinux-1.2.0.3.tar.gz from the upstream
sourceforge location, which will fail, and then fallback to the backup
mirror, where it will successfully find iqvlinux-1.2.0.3.tar.gz.
Also add hashes for license files.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: don't add custom logic for download, use
iqvlinux-1.2.0.3.tar.gz, which is hosted on sources.buildroot.net.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove both patches (applied upstream), and therefore remove
AUTORECONF = YES.
- Remove --disable-python as python support has been removed
(e144a06bd7)
- Remove lua optional dependency as lua support has been removed
(b52a5bef6f)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The pcre configure script does this:
if test "x$with_libpcre_libraries" != "xno"; then
LDFLAGS="${LDFLAGS} -L${with_libpcre_libraries}"
else
LDFLAGS="${LDFLAGS} `pcre-config --libs`"
fi
So if you don't pass --with-libpcre-libraries, it calls pcre-config as
available in the PATH. So it picks up pcre-config from $(HOST_DIR) or
the system, which return results inappropriate for cross-compilation.
So, let's explicitly pass --with-libpcre-includes and
--with-libpcre-libraries to avoid those issues.
Fixes:
http://autobuild.buildroot.net/results/3df11c48c8e2f795f478d1ee666dda9de19133d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release adds a lot of bugfixes for x86_64 and aarch64.
It integrates gettext-tiny useful to be used with libintl stub.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of selecting BR2_PACKAGE_LIBUPNP, select BR2_PACKAGE_LIBUPNP18
if BR2_PACKAGE_LIBUPNP is not enabled
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adding basic support modeled after the Freescale/NXP T1040RDBD4 board.
This target is used to support testing of the bootlin e5500 toolchain.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Thomas: update .gitlab-ci.yml.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/c5bb5f978602896179ff9c58ecf4ced40bb96b57
When ncurses is built with wide support, we install libncursesw (plus a
libncurses symlink) but NOT ncursesw.h, only ncurses.h. This combination
confuses the ncmpc build system as it expects a ncursesw.h when it finds
libncursesw:
meson.build:92:4: ERROR: Problem encountered: No ncursesw header found
The ncurses/ncursesw logic in the build system is only used to know what
header file to #include, and what library to link with. As we already
provide a libncurses symlink when building with wide support we can simply
force ncmpc to use the ncurses variant.
[Peter: extend commit message]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The mesa's EGL/eglplatform.h header includes X11 headers unless the flag
MESA_EGL_NO_X11_HEADERS is defined[1].
A build issue happens when mesa3d is selected as then OpenGL EGL backend
but the XCB library is not selected. For instance, with this defconfig:
BR2_arm=y
BR2_cortex_a9=y
BR2_ARM_FPU_VFPV3D16=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
BR2_PACKAGE_QT5BASE_LINUXFB=y
BR2_PACKAGE_QT5BASE_EGLFS=y
BR2_PACKAGE_QT5WEBKIT=y
Also the odroid-mali EGL backend suffers the same problem.
This commit backports the patch from the Gerrit of Qt which is in
review[5]. It extends the QMAKE_CXXFLAGS with cflags contained in the
egl.pc file.
In this situation, the define MESA_EGL_NO_X11_HEADERS is given to the
compiler that prevent from including the missing X headers.
The issues QTBUG-61712[3] and QTBUG-66233[4] are opened in the Qt
tracker.
Fixes
http://autobuild.buildroot.net/results/8781a561ae1a89e4d70ddaba65d8817eabe3ce69
[1]: 79ee1b2ff0/include/EGL/eglplatform.h (L109-L125)
[2]: https://codereview.qt-project.org/#/c/198906/
[3]: https://bugreports.qt.io/browse/QTBUG-61712
[4]: https://bugreports.qt.io/browse/QTBUG-66233
Cc: Julien CORJON <corjon.j@ecagroup.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The symlink method is faster, since there is no shell fork/exec, and
provides extra space savings.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas: use the symlinks method not only for the merged /usr case,
but also in the non-merged case to be consistent, and therefore adjust
the logic that was moving the shell wrappers to a logic that recreates
the symlinks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This brings up error checking at each iteration of the loop for free,
which removes the need for "|| exit 1".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check-package script finds base_dir (= the Buildroot directory) and
cd's into it. To be able to support relative paths as arguments, it
first recalculates the arguments relative to base_dir.
However, if there is a symlink anywhere on the path to the
check-package script, the relative paths will be wrong. To solve this,
use realpath() instead of abspath(), so symlinks are resolved before
calculating the relative path.
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the support for <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends which respectively show the list of all
dependencies or reverse dependencies for a given package. The existing
show-depends and show-rdepends only show the first-level dependencies,
while show-recursive-depends and show-recursive-rdepends show
recursively the dependencies.
It is worth mentioning that while show-recursive-depends really shows
all dependencies, show-recursive-rdepends is a bit limited because the
reverse dependencies of host packages are not properly accounted
for. But that's a limitation that already exists in show-rdepends, and
that cannot easily be solved.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- split from the patch that was also changing graph-depends
- rename show-rrdepends to show-recursive-rdepends
- add show-recursive-depends
- don't create GRAPHS_DIR.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
graph-depends currently spits out a graph in .dot format. However, as
part of the upcoming introduction of <pkg>-show-recursive-depends and
<pkg>-show-recursive-rdepends, we need graph-depends to be able to
display a flat list.
Signed-off-by: George Redivo <george.redivo@datacom.ind.br>
[Thomas:
- Rebase on top of graph-depends changes
- Do not display the package name itself in the list, only its
dependencies (or reverse dependencies)
- Display the result on a single line, instead of one package per
line, in order to match what <pkg>-show-depends and
<pkg>-show-rdepends are doing today.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of hardcoded sys.stderr.write() calls. No functional change, but
allows us to easily implement a quiet option.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install the motion.config file were the program expects it to be. From
the motion source code:
snprintf(filename, PATH_MAX, "%s/motion/motion.conf", sysconfdir);
Signed-off-by: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
New options allow to build following components:
* Json
* Redis
* MongoDB
* CppParser
* PDF
This allows to significantly reduce the size of the POCO
libraries. Even though it breaks backward compatibility because those
features were enabled and are now disable by default, Buildroot's
policy is to build the minimal feature-set by default. And users will
get a very clear build failure, which should be easy to fix.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: add an explanation about backward compatibility.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
i2pd (I2P Daemon) is a full-featured C++ implementation of I2P
client.
I2P (Invisible Internet Protocol) is a universal anonymous
network layer.
All communications over I2P are anonymous and end-to-end
encrypted, participants don't reveal their real IP addresses.
http://i2pd.website
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Add third patch to not install the license file in /usr/LICENSE and
the source code in /usr/src instead of using a post-install-target
hook to remove /usr/LICENSE and /usr/src. Indeed, we're not sure if
/usr/src contains only stuff installed by this package.
- Clarify the comment that explains why -DTHREADS_PTHREAD_ARG=OFF is
passed, especially because it's only needed for older versions of
CMake, and causes a warning with newer versions of CMake.
- Propagate architecture dependencies to the Config.in comment about
the exception_ptr requirement.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds WTF platform support for the 32-bits armv8-a architectures.
Fixes:
In file included from ./config.h:30:0,
from ...
./wtf/Platform.h:323:6: error: #error "Not supported ARM architecture"
# error "Not supported ARM architecture"
^~~~~
from this defconfig:
BR2_arm=y
BR2_cortex_a72=y
BR2_ARM_FPU_VFPV3D16=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_NONE=y
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5WEBKIT=y
The patch is an adaptation of an upstream fix in version 5.212 of
qtwebkit[1].
Unfortunately, the commit cannot be backported and has to be fixed since
the toolchain does not define __ARM_ARCH_8__ but __ARM_ARCH_8A__.
$ host/bin/arm-buildroot-linux-gnueabihf-g++ -dM -E - < /dev/null | grep ARM_ARCH
#define __ARM_ARCH_ISA_ARM 1
#define __ARM_ARCH_8A__ 1
#define __ARM_ARCH_PROFILE 65
#define __ARM_ARCH_ISA_THUMB 2
#define __ARM_ARCH 8
#define __ARM_ARCH_EXT_IDIV__ 1
[1]: 35655d5f4b/Source/WTF/wtf/Platform.h (L241-L242)
Cc: Arnout Vandecappelle <arnout@mind.be>
Reported-by: Brock Williams <brock@cottonwoodcomputer.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The graph-depends was not very consistent in colors vs. colours: some
parts were using colours, some parts were using colors.
Let's settle on the US spelling, colors.
This change the user-visble option --colours to --colors, but it is
unlikely that a lot of users customize the colors through
BR2_GRAPH_DEPS_OPTS, so this user interface change is considered
reasonable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The graph-depends script had no main() function, and the main code was
actually spread between the function definitions, which was a real
mess.
This commit moves the global code into a main() function, which allows
to more easily follow the flow of the script. The argument parsing
code is moved into a parse_args() function.
Most of the global variables are removed, and are instead passed as
argument when appropriate. This has the side-effect that the
print_pkg_deps() function takes a lot of argument, but this is
considered better than tons of global variables.
The global variables that are removed are: max_depth, transitive,
mode, root_colour, target_colour, host_colour, outfile, dict_deps,
dict_version, stop_list, exclude_list, arrow_dir.
The root_colour/target_colour/host_colour variables are entirely
removed, and instead a single colours array is passed, and it's the
function using the colors that actually uses the different entries in
the array.
The way the print_attrs() function determines if we're display the
root node is not is changed. Instead of relying on the package name
and the mode (which requires passing the root package name, and the
mode), it relies on the depth: when the depth is 0, we're at the root
node.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some test cases don't use a full build as setup, so split the build()
method into configure() and build().
It allows a test case to perform configuration at the setup stage and
the build inside the test itself.
Call this new method just before build in the BRTest base class, to keep
the current behavior for existing test cases.
This change will be needed when adding a common class to test the git
download infra.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@datacom.ind.br>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use an empty environment when calling make, but import PATH so the
buildroot tree under test can find binaries from the host machine.
Since environment variables are now ignored, move the handling of
BR2_DL_DIR to the defconfig to keep the current precedence of -d:
BR2_DL_DIR | -d DIR | test downloads | BR downloads
------------+----------+------------------+--------------
unset | unset | [error] | [error]
unset | set | in $(DIR) | in $(DIR)
set | unset | in $(BR2_DL_DIR) | in $(BR2_DL_DIR)
set | set | in $(DIR) | in $(DIR)
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: select and add to dependencies good/bad plugins,
enable/disable examples if gtk2/3 with x11 backend is available]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use a normal config option instead of menuconfig, update DEVELOPERS]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like the utilities, it is meant to run on the host machine, hence must
be built using the host toolchain.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This allows using <PKG>_SRCDIR_OVERRIDE_RSYNC_EXCLUSIONS in local.mk to
skip copying parts of source trees unneeded for building. For example,
when developing WebKitGTK+, it's handy to skip copying all the tests and
other build directories, which are huge:
WEBKITGTK_OVERRIDE_SRCDIR = /home/aperez/WebKit
WEBKITGTK_OVERRIDE_SRCDIR_RSYNC_EXCLUSIONS = \
--exclude JSTests --exclude ManualTests \
--exclude PerformanceTests --exclude WebDriverTests \
--exclude WebKitBuild --exclude WebKitLibraries \
--exclude WebKit.xcworkspace --exclude Websites \
--exclude Examples
This saves a good chunk of time when rsync is used for the first time to
copy the source tree over before building.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: move documentation to the end of the section]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that <pkg>_BINDIR is always "bin", having it as a package variable
doesn't make much sense, so get rid of this variable completely, and
use "bin".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So far, we were using the 'go install' mechanism to build a package
and have its binary installed in
$$($(2)_WORKSPACE)/bin/linux_$$(GO_GOARCH). This worked fine when
building on x86-64 for ARM, but failed when building on x86-64 for
x86-64 because the binaries were installed in $$($(2)_WORKSPACE)/bin/.
Instead of doing some complicated logic to guess whether Go is going
to put our binaries in $$($(2)_WORKSPACE)/bin/ or in
$$($(2)_WORKSPACE)/bin/linux_$$(GO_GOARCH), we revert back to using
"go build", as it was done before the introduction of the golang
package infrastructure. "go build" lets us pass explicitly the
destination path of the binary to be generated.
There's just one complexity with how to decide on the name of the
binary that should be produced, and we have two cases:
- <pkg>_BUILD_TARGETS is the default, i.e ".". In this case we assume
a single binary is produced by "go build", and we name if after the
lower case package name. We allow this to be overridden thanks to
<pkg>_BIN_NAME.
- <pkg>_BUILD_TARGETS is non-default, and typically contains
something like "foo bar" or "cmd/foo cmd/bar". In this case, we
assume the binaries to be produced are "foo" and "bar", i.e we take
the non-directory part of the build target to name the binaries.
Because we're using this -o option, we no longer need to explicitly
create the binary directory, it is done by "go build".
Fixes:
http://autobuild.buildroot.net/results/1f9cd7c48e8c8f41326632a9c0de83915d72c45b/
[Peter: use $(or instead of $(if as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the latest Buildroot Developers meeting, we discussed that
test-pkg would perhaps be more widely used if it tested a smaller
subset of toolchains. Indeed, it currently tests 47 toolchains, which
takes very long to build. Several of the toolchain configurations are
quite similar, and it is perhaps not necessary for contributors to
test them all before submitting a package.
Therefore, this commit changes the test-pkg script to only test a
subset of the toolchain configurations by default. The N first
configurations of the CSV files are tested, where N is hard-coded in
the script. The CSV file has therefore been re-organized to have the
first N toolchains be the most important ones.
A -a/--all option is added to test with all toolchains, while a
-n/--number option is added to test with the first N toolchains, N
being passed on the command line.
Note that the list of toolchains (built in the "toolchains" shell
variable) is no longer sorted. Indeed, when the first N toolchains are
tested, we want them to be tested in the same order as they are listed
in the CSV file, as we are careful to order them in an interesting
order. We only sort when all toolchains are tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit reorganizes the toolchain-configs.csv so that the first
toolchains are a subset of "useful" toolchains to be tested by
contributors to validate a package. This subset is the one that will
be used by default by test-pkg.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since gcc 4.6, GCC deprecated -mfused-madd, -ffp-contract=off should
be used for the Xburst workaround.
Tested with the MIPS Sourcery 2011.03 toolchain (based on gcc 4.5),
the toolchain wrapper uses -mno-fused-madd, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2011.03/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-mno-fused-madd'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
And with the MIPS Sourcery 2012.09 toolchain (based on gcc 4.7), the
toolchain wrapper uses -ffp-contract=off, as expected:
$ BR2_DEBUG_WRAPPER=2 ./output/host/bin/mips-linux-gnu-gcc -o toto toto.c
Toolchain wrapper executing:
'/home/thomas/toolchains/mips-2012.09/bin/mips-linux-gnu-gcc'
'--sysroot'
'/home/thomas/projets/buildroot/output/host/mipsel-buildroot-linux-gnu/sysroot'
'-mabi=32'
'-msoft-float'
'-ffp-contract=off'
'-EL'
'-march=mips32r2'
'-o'
'toto'
'toto.c'
Fixes the ci20_defconfig build:
https://gitlab.com/buildroot.org/buildroot/-/jobs/60303132
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rework to continue supporting pre-gcc-4.6 toolchains, extend
the commit log after doing more testing.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In the situation where the hash is missing from the hash file, the
dl-wrapper downloads the file again and again until the developer
specifies the hash to complete the download step.
To avoid this situation, the freshly-downloaded file is not removed
anymore after a successful download.
After this change, the behaviour is as follows:
- Hash file doesn't exist, or file is in BR_NO_CHECK_HASH_FOR
=> always succeeds.
- Hash file exists, but file is not present
=> file is NOT removed, build is terminated immediately (i.e.
secondary site is not tried).
- Hash file exists, file is present, but hash mismatch
=> file is removed, secondary site is tried.
=> If all primary/secondary site downloads or hash checks fail, the
build is terminated.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
[Arnout: extend commit log]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This patch adds hackrf/host tools for HackRF, a low cost, open source
Software Defined Radio platform.
Sources of host tools are available on GitHub here:
https://github.com/mossmann/hackrf/tree/master/host
Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[Arnout:
- Rename package to hackrf to match upstream name;
- Reorder dependencies and remove empty line (check-package);
- Use only sha256 hash;
- Add hash for license file;
- Bump to 2018.01.1;
- Use uploaded tarball rather than github-generated one;
- Fix dependencies of comment (|| instead of &&)
- Add UDEV_RULES_GROUP=plugdev in case the build host doesn't have
this group;
- Add patch fixing build without C++ compiler.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[Thomas: as suggested by Romain Naour, use
QUOTATOOL_INSTALL_TARGET_OPTS to avoid installing man pages, as it
fails due to a bug in the upstream package Makefile]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In current Buildroot, clashes occur between the variables _NAME and
_BASE_NAME for two packages called foo and foo-base, i.e.
Package foo:
FOO_NAME = foo
FOO_BASE_NAME = foo-1.2.3
Package foo-base:
FOO_BASE_NAME = foo-base
FOO_BASE_BASE_NAME = foo-base-4.5.6
where variable FOO_BASE_NAME is clashing between these two packages.
Specific cases where this clash is already existing are:
- alljoyn-base
- alljoyn-tcl-base
- perl-xml-sax-base
The problem is generic and can occur for a number of variables in Buildroot.
A non-exhaustive list:
<pkg>_BASE and <pkg>_BASE_NAME
<pkg>_BASE_NAME and <pkg>_RAW_BASE_NAME
<pkg>_DIR and <pkg>_DL_DIR
<pkg>_VERSION and <pkg>_DL_VERSION
<pkg>_SOURCE and <pkg>_TARGET_SOURCE
<pkg>_INSTALL_IMAGES and <pkg>_TARGET_INSTALL_IMAGES (same for _STAGING and _TARGET)
<pkg>_LICENSE_FILES and <pkg>_MANIFEST_LICENSE_FILES
<pkg>_DEPENDENCIES and <pkg>_FINAL_DEPENDENCIES
One solution is to use another separator than '_' to separate the
package name from the rest of the variable name. For example, a double
underscore:
FOO__NAME
FOO__BASE_NAME
FOO_BASE__NAME
FOO_BASE__BASE_NAME
However, making that change for only this case means that the variable
naming is no longer consistent. And making the change for all variables has
a large impact, also on certain user scripts.
For now, keep it simple, and rename FOO_BASE_NAME into FOO_BASENAME, so that
the variables become:
FOO_NAME
FOO_BASENAME
FOO_BASE_NAME
FOO_BASE_BASENAME
For consistency, also adapt FOO_RAW_BASE_NAME. Since FOO_RAW_BASENAME would
still pose a conflict with a package called 'foo-raw', take the opportunity
to rename it into FOO_BASENAME_RAW instead, which does not pose a conflict
as we have no variable called FOO_RAW.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Sam Voss <sam.voss@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Post-build/image scripts may need to extract information from Microsoft
Excel (tm) spreadsheet files.
Signed-off-by: Lothar Felten <lothar.felten@gmail.com>
[Arnout: add package/Config.in.host entry]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It should be "host gnupg" and not "host-gnupg" to be consistent with
all other Config.in.host options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
My goal was to rely on upstreamed features as much as possible, which
means that some bits are only half-baked for now:
- Due to the DTS restructuring in upstream kernel, we require 4.11+. The
latest LTS or CIP kernels do not know about the -Base model.
- Linux has no generic support for SFP cages (yet). It seems that this
has hit the net-next tree in August 2017, but there's been no release
(it's probably targettting 4.14). Also, the merge only included the
required infrastructure; the mvneta driver conversion is not included.
Patches which finalize this exist in Russel King's tree and also in
random vendor trees.
- There's no access to the SPI flash in these versions of
uboot/linux/dts.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
[Arnout:
- rename to solidrun_clearfog_defconfig;
- specify kernel headers version (default is now 4.15);
- remove ext2 fs size override, the 4 extra MB are not needed;
- U-Boot needs dtc and openssl;
- add comments to defconfig;
- update .gitlab-ci.yml;
- mention in readme.txt that SFP support is missing;
- add Jan to DEVELOPERS.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Drop 0001-Complete-support-for-MIPS-n32-ABI.patch as it is now upstream and rebase
0002-Makefile.arm-remove-march-flags.patch.
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#10856
The SSE_GENERIC target fails to build with a "sgemm_kernel.o: No such file
or directory" error. Several upstream bug reports exist for this:
https://github.com/xianyi/OpenBLAS/issues/502https://github.com/xianyi/OpenBLAS/issues/685
In both cases, upstream suggests using a different target definition
instead. E.G. from issue 685:
You may use NORTHWOOD on x86: make TARGET=NORTHWOOD that uses SSE2
instructions. It's very hard to find non-SSE2 x86 CPUs today. For x86-64
use the PRESCOTT target
So drop the SSE_GENERIC target. The only x86_64 variant we support not
covered by a more specific openblas target is the default variant, nocona
and jaguar.
Nocona was a Xeon variant of the P4 "Prescott" architecture, so use the
PRESCOTT openblas target:
https://en.wikipedia.org/wiki/Xeon#Nocona_and_Irwindale
Jaguar is from the Bobcat family, so use the BOBCAT openblas target:
https://en.wikipedia.org/wiki/List_of_AMD_microprocessors#Bobcat_core_architecture_(APU)
[Peter: add Jaguar as pointed out by Arnout]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the OpenCV3 Python support is enabled with Python 3.x, it builds
properly, and the resulting .so file is built for the target
architecture, but its name is wrong:
output/target/usr/lib/python3.6/site-packages/cv2.cpython-36m-x86_64-linux-gnu.so
This prevents Python 3.x from importing the module:
>>> import cv2
Traceback (most recent call last):
File "<stdin>", line 1, in <module>
ModuleNotFoundError: No module named 'cv2'
In order to fix this, we simply need to pass PKG_PYTHON_DISTUTILS_ENV
in the environment. The Python module then gets named:
output/target/usr/lib/python3.6/site-packages/cv2.cpython-36m-arm-linux-gnueabi.so
And can be imported properly:
>>> import cv2
>>>
This solution was suggested by Arnout Vandecappelle in
https://stackoverflow.com/questions/49059035/buildroot-opencv3-python-package-builds-for-the-wrong-target.
With Python 2.x, the module is named just cv2.so so this problem isn't
visible. However, for consistency, we also pass
PKG_PYTHON_DISTUTILS_ENV when building against Python 2.x, by putting
the OPENCV3_CONF_ENV assignment inside the
BR2_PACKAGE_OPENCV3_LIB_PYTHON condition, but outside the
BR2_PACKAGE_PYTHON3/BR2_PACKAGE_PYTHON condition.
Signed-off-by: Sasha Shyrokov <alexander-shyrokov@idexx.com>
[Thomas: extend the commit log, apply the solution to Python 2.x.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
package/Config.in, package/Config.in.host, package/x11r7/Config.in and
package/kodi/Config.in do not comply with the normal Config.in
indentation rules. However, this violation of the rule is legitimate, so
let's skip them in check-package for this specific indentation check.
This removes the last 2197 remaining warnings on Config.in files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Ricardo: rebase patch to use relative paths passed by the main script,
fix flake8 warnings, add package/Config.* to the list]
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The toolchain directory can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the toolchain/ directory.
Ignore this symbol:
- BR_LIBC: defined by the buildroot toolchain, used by gcc-final.mk.
Ignore toolchain/toolchain-external/pkg-toolchain-external.mk as it
declares a package infra and not a package itself.
Ignore toolchain/helpers.mk as it contains only helper functions.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the linux/ directory.
Ignore missing LINUX_EXT_ prefix as the variables for linux extensions
do not use it.
Ignore this symbol:
- LINUX_EXTENSIONS: defined by each linux extension, used by
linux/linux.mk.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The filesystem types can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the fs/ directory.
Ignore fs/common.mk as it declares a package infra and not a package itself.
Register the ROOTFS_ as a valid prefix for variables.
Ignore these symbols:
- PACKAGES_PERMISSIONS_TABLE: defined either by packages through
pkg-generic or by filesystem types, used by fs/common.mk;
- SUMTOOL: defined by package mtd, used by filesystem jffs2;
- TARGETS_ROOTFS: defined by filesystem types, used in the main
Makefile.
Keep using loose checks that warn about common mistakes while keep the
code simple.
As a consequence the check functions do not differentiate between
packages and filesystems so the symbol PACKAGE_UBI would not generate a
warning for the ubi filesystem neither the symbol ROOTFS_MTD would
generate a warning for the mtd package. But those kind of mistakes are
not common and are obvious in the code review, unlike typos i.e.
ROOTFS_UBl or PACKAGE_MID that would be hard to see in the code review.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This directory can benefit from this script to prevent common mistakes
when submitting patches.
In order to accomplish this:
Do not ignore anymore files from the boot/ directory.
Ignore boot/barebox/barebox.mk as it declares a package infra and not a
package itself.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rearrange the header of the .mk file so it becomes similar to a header
from a package. It doesn't fit in one line, so split the details to a
comment below the header.
GCONV_LIBS is only used inside this file, so rename it to start with
TOOLCHAIN_, following the namespace convention already used by packages.
Rename the hook COPY_GCONV_LIBS to TOOLCHAIN_GLIBC_COPY_GCONV_LIBS
following the convention used for hooks in packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
toolchain-common.in is a Config.in file with an uncommon name.
It is just included by toolchain/Config.in, and toolchain/Config.in is
not that long, so instead of renaming the file, merge it to
toolchain/Config.in.
Move the raw contents from the file to the exact location it is
currently included in order to not change the order in the menu.
Update the references in the manual as well.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These three symbols:
KERNEL_ARCH_PATH
KERNEL_DTBS
KERNEL_DTS_NAME
are defined and used only inside this file, so use the LINUX_ namespace
for them instead of KERNEL_.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The header of the initramfs.mk file fits in one line, so rearrange it.
Remove consecutive empty line.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
UBINIZE_CONFIG_FILE_PATH is only used inside this file, so rename it to
start with UBI_, following the namespace convention already used by
common packages.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These directories can benefit from this script to prevent common
mistakes when submitting patches.
In order to accomplish this:
Do not ignore anymore files from these directories.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently the script only checks files inside the package/ directory.
Upcoming patches will enable it for other directories.
In order to reliably test for file names, i.e. the Config.in in the base
directory, normalize the path of files to check to a relative path to
the base directory.
Rename the variable that holds the compiled regexp to better represent
its content and rearrange how it is declared to make easy to later add
new directories to check. As a consequence the files that declare
package infra types would not be ignored anymore, so create a new
variable to list the files intree to be ignored during the check. The
same variable will be used by upcoming patches to ignore other files.
Ignore pkg-*.mk and doc-asciidoc.mk since they are package infra files.
In order to not produce weird results when used for files outside the
tree (i.e. in a private br2-external) add an explicit command line
option (-b) that bypasses any checks that would make a file be ignored
by the path that contains it.
When in this out-of-tree mode, the user is responsible for providing a
list of files to check that do not contain files the script does not
understand, e.g. package infra files.
As a result of this patch, besides the known use:
$ ./utils/check-package package/new-package/*
someone with the utils/ directory in the path can now also run:
$ cd package/new-package/
$ check-package *
or
$ check-package -b /path/to/br2-ext-tree/package/staging-package/*
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 3a0c20c530 (scanpypi: add support for Python3) adapted the script
to work with python 3.x, but the shebang still said python2 making it
unlikely to work on systems without python 2.x.
Change it to just 'python' instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The nc -> netcat symlink is not created if nc exists already, e.g.
from busybox.
For netcat itself this is not needed, it is always installed.
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
It may be necessary if packages become built in parallel, leading to a
race condition on the creation of the "nc" link.
Of course this still leaves a race conditon if other netcat competitors
but we must assume thet the user is a grown-up person who knows what is
doing.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Arnout: Don't force-remove the existing nc, not needed according to
Romain.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
https://git.buildroot.net/buildroot/commit/?id=266208972192f1e0869f89d7be941de6294a810a
broke imx support in Kodi because previously the G2D libraries were
part of the imx-gpu-viv package:
CMake Error at /usr/share/cmake-3.7/Modules/FindPackageHandleStandardArgs.cmake:138 (message):
Could NOT find IMX (missing: G2D_LIBRARY)
Adjusting the Kodi package to use the imx-gpu-g2d as well still does
not provide a working build:
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'void CIMX::Deinitialize()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:79:21: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'bool CIMX::UpdateDCIC()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:109:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:115:21: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp: In member function 'virtual void CIMX::Process()':
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:125:19: error: 'DCIC_IOC_START_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_START_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~~
/home/buildroot/br4/output/build/kodi-17.6-Krypton/xbmc/linux/imx/IMX.cpp:131:19: error: 'DCIC_IOC_STOP_VSYNC' was not declared in this scope
ioctl(m_fddcic, DCIC_IOC_STOP_VSYNC, 0);
^~~~~~~~~~~~~~~~~~~
Although it might be possible to fix these bugs with something like
#define DCIC_IOC_CONFIG_DCIC _IO('D', 12)
#define DCIC_IOC_START_VSYNC _IO('D', 15)
#define DCIC_IOC_STOP_VSYNC _IO('D', 16)
as done in
https://raw.githubusercontent.com/LibreELEC/LibreELEC.tv/libreelec-7.0/projects/imx6/patches/kodi/imx6-jarvis.patch
we would still try to ride a dead horse. The upcoming Kodi version
18.0-Leia will remove imx support completely, see upstream PR 12990.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: keep an explicit -DENABLE_IMX=OFF in CONF_OPTS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to imx-vpu-5.4.37/Makefile, line 6:
INCLUDE_LIST:= IMX27ADS IMX51 IMX53 IMX6Q
imx6s is not supported by the imx-vpu package. Its install target,
guarded by
ifeq ($(PLATFORM), $(findstring $(PLATFORM), $(INCLUDE_LIST)))
does nothing, causing a build error later on in the imx-vpuwrap package
checking for vpu_lib.h... no
configure: error: lib_vpu is required, consider installing imx-lib
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since custom dts files are unconditionally handled *KERNEL_USE_CUSTOM_DTS
is no longer available/needed.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Custom dts files are still conditionally copied based on non existing
boolean. So it is currently not possible to use custom dts file(s) at all.
List of dts files is now iterated and files are copied into dedicated kernel arch dir.
Signed-off-by: Rafal Susz <rafal.susz@gmail.com>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When imake is installed on the host, it tries to include
freetype headers from host, so we must override ac_cv_path_IMAKE
to avoid this.
Extract from config.log:
configure:14803: checking if we should use imake to help
configure:14820: result: yes
configure:14829: checking for xmkmf
configure:14846: found /usr/bin/xmkmf
configure:14857: result: /usr/bin/xmkmf
configure:14920: testing Using /usr/bin/xmkmf ...
configure:15015: testing IMAKE_CFLAGS -I. -I/usr/include/freetype2
Signed-off-by: Valentin Korenblit <valentin.korenblit@smile.fr>
[Thomas: pass ac_cv_path_IMAKE="" as suggested by Romain Naour.]
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libbsd builds now almost fine with a musl or uClibc toolchain, except
for one issue introduced in the latest version bump. Upstream commit
22fbd62368c39de8ac5e249d1502d5ac0ffdef30 [1] uses the glibc-only macro
`__GLIBC_PREREQ`. The issue is fixed by the attached patch from upstream,
which fixes the use of `__GLIBC_PREREQ` on non-glibc toolchains.
Backported from:
https://cgit.freedesktop.org/libbsd/patch/?id=1f8a3f7bccfc84b195218ad0086ebd57049c3490
netcat-openbsd is the only package selecting libbsd. However, building
it still needs a glibc toolchain, as it uses `b64_ntop` which is not
available in musl or uClibc.
Build has been successfully tested with:
* armv7-eabihf--glibc--bleeding-edge-2017.11-1
* armv7-eabihf--musl--bleeding-edge-2018.02-1
* armv7-eabihf--uclibc--bleeding-edge-2018.02-1
[1] https://cgit.freedesktop.org/libbsd/commit/?id=22fbd62368c39de8ac5e249d1502d5ac0ffdef30
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a test to check Python code style in the whole buildroot tree.
Search files by type in order to help flake8 to find the Python scripts
without .py extension. But don't rely only in the output of 'file' as it
uses heuristics and sometimes it is wrong (specially identifying Python
files as C++ source for the 'file' version currently in the Docker
image).
Include in the output:
- the list of Python files processed;
- statistics for each kind of warning;
- the total number of warnings;
- the number of Python files processed.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if --enable-static --disable-shared is passed, wine tries to
build a shared library, causing a build failure in a BR2_STATIC_LIBS=y
configuration:
/home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): In function `__uClibc_fini':
__uClibc_main.c:(.text.__uClibc_fini+0x10): undefined reference to `__fini_array_start'
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: /home/test/buildroot/output/host/i686-buildroot-linux-uclibc/sysroot/usr/lib/libc.a(__uClibc_main.os): relocation R_386_GOTOFF again
st undefined hidden symbol `__fini_array_start' can not be used when making a shared object
/home/test/buildroot/output/host/lib/gcc/i686-buildroot-linux-uclibc/6.4.0/../../../../i686-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
make[2]: *** [libwine.so.1.0] Error 1
make[2]: Leaving directory `/home/test/buildroot/output/build/wine-3.0/libs/wine'
make[1]: *** [libs/wine] Error 2
Since using wine in a static linking environment is fairly unlikely,
we simply mark the wine package unavailable on static-only
configurations.
Since we need to add a Config.in comment, we also introduced a
BR2_PACKAGE_WINE_ARCH_SUPPORTS hidden boolean, to share the
architecture dependencies definition between the wine config option
and the comment.
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- add a comment in the Config.in file about the dependency
- add BR2_PACKAGE_WINE_ARCH_SUPPORTS
- extend the commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, if the user specifies the path to an existing directory as
the path to the custom (def)config file (FOO_KCONFIG_FILE), then we
happily create a file in there, either 'defconfig' or '.config' (or
whatever the .config is named for that package), depending on whether
we're saving a defconfig or a full config.
So, we could save the file, but then the Buildroot defconfig file that
contains that path would no longer be reusable as-is, because we
interpret that path as a path to a file.
Furthermore, if the directory-portion of FOO_KCONFIG_FILE does not
exist yet, the update would fail, because cp does not create missing
directory components.
So we fix that by adding an explicit test for the directory-ness of the
target file, and then an explicit mkdir to create missing directory
components.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When updating back the (def)config file, the touch command is not very
useful by default, so hide it away.
We do not hide away the cp command, as that could confuse the user under
some circunmstances. For example, when the toolchain does not yet exist,
the uClibc buildsystem will complain multiple times about gcc not being
found, like so:
make[2]: /home/ymorin/dev/buildroot/O/host/bin/i686-buildroot-linux-uclibc-gcc: Command not found
(Note that we can not suppress those warnings, as they are on stderr,
and we still want to see stderr in case of real errors).
So, if we were to hide the cp command, the user could be left confused,
even though we were sucessful in updating back the (def)config file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Except for the nice human-friendly reminder of the command that the user
was just running, and the name of the file to copy from, those two rules
are exactly the same.
Make that a common macro that is shared, so that it's easier to add more
checks, and to simplify maintenance.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This was present in Yann's original patch, but got dropped when I rebased
commit 7e9870ce32 (core: introduce intermediate BASE_TARGET_DIR variable) to
fix the Makefile conflicts.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Similar to how we do for openssl.
host-luainterpreter is only used by the luarocks infrastructure, and there
is afaik no specific reason why the host lua variant must match the target one.
Luajit only supports a limited number of architectures, so building it for
the host limits the architectures Buildroot can be used on (E.G. powerpc64
autobuilders).
To fix this, always use host-lua. Slightly rework lua.mk to ensure
host-lua-5.1 is used when luajit is selected, and drop the logic for using
host-luajit.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes#10776
The upstream git repo contains a number of fixes for building against newer
kernel versions, so bump the version.
git shortlog eb66d40310c93dc82bc8eac889744c1ed1f01f7b..
Alain Kalker (2):
uprobe: Print the symbol, not the matching pattern
uprobe: Blacklist uretprobes on _start
Aleksa Sarai (2):
runtime: update GFP_WAIT to GFP_RECLAIM
userspace: fix up argument parsing NULL dereference
Alexey Makhalov (1):
Fix building for v4.8 kernel
Azat Khuzhin (12):
Use get_unused_fd_flags(0) instead of get_unused_fd()
Support trace_seq::seq
Ignore separate debug files (*.dwo)
Use trace_seq_has_overflowed()
makefile: split vim plugins installing into separate target
makefile: use DESTDIR for install (allow to change install dir)
makefile: install: create dirs
makefile: use ldflags for linking ktap
makefile: add CPPFLAGS to KTAPC_CFLAGS, to allow change default flags
ignore: exclude /debian
Support compilation for 4.2 (ftrace_events cleanup)
runtime: fix building on 4.3
Jovi Zhangwei (11):
Merge pull request #84 from azat/linux-3.19-fixes-v3
Merge pull request #85 from azat/debian-preparations-v2
Merge pull request #88 from NanXiao/master
Merge pull request #89 from NanXiao/patch-1
Merge pull request #91 from NanXiao/patch-1
Merge pull request #90 from azat/linux-4.2-compilation-fixes
Merge pull request #99 from cyphar/fix-null-deref
Merge pull request #98 from cyphar/fix-gfp-reclaim
Merge pull request #97 from azat/fix-building-4.3-__GFP_RECLAIM
Merge pull request #103 from ackalker/blacklist
Merge pull request #104 from YustasSwamp/master
Nan Xiao (3):
Update tutorial.md
Update Makefile
Fix memory leak issue in main function.
WEI ZHANG (1):
ktap: Change the copyright to Huawei Technologies
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Each of the intermediate, per-rootfs target directories, as well as the
intermediate tarball, can take quite some place, and is mostly a
duplication of what's already in target/. The only delta, if any, would
be the tweaks made by the filesystem image generations, but those tweaks
are most probably only meaningful when seen as root.
We normally do not remove intermediate files, but those can be quite
large, and are not directly usable by, nor accessible to the user.
So, get rid of them once the filesystem has been generated.
This does not need to be done in fakeroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the pre-fs ones are run on a transient copy of target/, the
post-fs hooks are no longer needed because we no longer need to restore
the target/ directory as it is only a internal copy.
Remove support for the post-fs hooks, and update the sole package using
them.
We do not add a legacy check because this was mostly a purely-internal
detail that was never really exposed nor documented.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, some packages may register hooks to be run just before and
just after the generic tarball image is generated, because they need to
prepare the filesystem for read-only or read-write operation.
However, this means that, if any of the hooks or the image generation
fails, the target directory is left in a dangling, inconsistent state.
We fix that by doing a copy of target/, run the hooks on that copy,
generate the generic tarball image out of that, and get rid of the copy.
This way, we can guarantee consistency of the target directory, and we
can even ditch support for post-fs hooks (those that restore target/).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, some filesystems may want to tweak the content of the target
directory, create special device nodes etc... This all means that:
- the content of the target directory for a specific filesystems may
depend on whether another filesystem is enabled or not; for example,
cpio will create a /init script or symlink and a /dev/console node;
- the filesystems can not be built in parallel, because they may change
the content of the target directory while another is being assembled.
Furthermore, the same fakeroot script is executed over-and-over-again
for each filesystem, to create the device nodes, the users and their
homes and files, and setting permissions...
We introduce an intermediate tarball, for which we do the full fakeroot
shebang.
That tarball then serves as the base for the other filesystems, with a
very simple fakeroot script that untars the common tarball, and calls
the actual filesystem image generator on that.
Note that we use a very simple tar command to generate the intermediate
tarball, because we are not concerned with reproducibility of the
archive itself (only of the archived files).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before we can create an intermediate tarball for all filesystems, we
nedd to move the common dependencies needed to generate that
intermediate tarball, rather than leave those dependencies to each
filesystem.
So, we introduce rootfs-common, which gathers all those common
dependencies.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... and locate that script in a per-rootfs directory.
Just like for ROOTFS, this variable will leak down the dependency tree to
target-finalize and packages - But it doesn't matter as it isn't used
outside fs/.
[Peter: extend commit message]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like we do for packages with the PKG variable, set ROOTFS to contain the
upper-case name of the rootfs currently being generated.
This will be useful in later patches, when we need more per-rootfs
variables, like a per-rootfs TARGET_DIR for example.
In Makefiles, per-rule variables trickle down the dependency chain, to
all dependencies of that rule, so we have to stop ROOTFS as soon as
we're not in a rootfs. This means we have to stop it at target-finalize
(which is a dependency of all filesystems), and for each package
individually, since some packages (host or target) can be direct
dependencies of filesystems as well.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new BASE_TARGET_DIR variable is set in stone to point to the real
location where packages will be installed. Its name is modelled after
its definition: it is located in $(BASE_DIR), and it is named 'target/',
hence BASE_TARGET_DIR.
The already-existing TARGET_DIR variable now simply points to the same
location, except that it is recursively expanded, so that we can later
change it depending on the context.
All locations that really need to reference the existing target/
directory, are changed to use BASE_TARGET_DIR; surprinsigly enough, they
all seem to be located in the main Makefile. :-) The rest is left with
using good-old TARGET_DIR.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We're soon to introduce a generic variable with that name, i.e.
$(FS_NAME)_TARGET_DIR, so our internal, temporary variable would
clash with it.
Just rename it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when we build a cpio filesystem without static devices, we
shoehorn the /dev/console node as if it were specified by a package.
This means that this device is added for all filesystems as well, not
just the cpio. But if we disable cpio, that device is not created for
other filesystems.
This is not very clean, and may break expectations.
Instead, use an explicit mknod as part of the _CMD, as we know it's
going to run under fakeroot.
This is still visible to all filesystems built after cpio, and not to
those built before it, though.
[Peter: ensure /dev exists, simplify comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the pre-gen hooks of the various filesystems are run before
we enter the fakeroot.
However, this precludes those hooks from doing actions that require
root, like creating a pseudo-device or the likes.
So, move those pre-gen hooks under fakeroot.
This has currently no side-effect, as they are still called before
everything else in the fakeroot script, even the system-wide chown call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- adapt to the changes in the golang-package infrastructure
- keep the logic to support BR2_PACKAGE_DOCKER_ENGINE_STATIC_CLIENT]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch adds a new infrastructure for golang based packages.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Arnout:
- Rewrap comments to 80 columns.
- Create a global definition of GO_TARGET_ENV.
- <PKG>_GO_ENV is appended to the default env instead of replacing it.
- Add a note to inner-golang-package that only target is supported.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The DOCKER_CONTAINERD_CONFIGURE_CMDS creates a symlink to runc's
source directory, but it does not build depend on runc, which means
that the runc package may not have been extracted/built before
docker-containerd.
Therefore, when doing a build with "make docker-containerd", this
symbolic link is broken, but it doesn't prevent docker-containerd from
building.
Therefore, this symlink is not necessary and can be dropped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If BR2_HOST_DIR is not the default, it can be difficult to find the
host directory (i.e., HOST_DIR always has to be passed explicitly in
addition to the output directory). For example, the Eclipse plugin
assumes that HOST_DIR=BASE_DIR/host.
Create a symlink from $(BASE_DIR)/host to $(HOST_DIR) if it is not the
default. Also remove it in the clean target.
When BR2_HOST_DIR is the default, HOST_DIR_SYMLINK will be empty so
there will be no additional dependency to dirs and nothing to remove
in clean.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10151
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
HOST_DIR is defined twice: once to its default value before .config is
included, and once more to BR2_HOST_DIR after .config is included.
However, the rule that defines the mkdir for HOST_DIR comes between
these two, so it will always use the default definition. Therefore,
if a non-default BR2_HOST_DIR is used, there will be no rule to create
that directory, while the dirs target depends on it.
This happens to work at the moment, because in the dirs target,
$(STAGING_DIR) comes before $(HOST_DIR), so $(HOST_DIR) will be created
implicitly. However, this will fail in top-level parallel builds where
both will be created in parallel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
License info from PyPI is wrong: it is LGPL-2.1+, not GPL-2.0. The
package includes a COPYING file with GPL-2.0, but since it is really
LGPL-2.1+ only the COPYING.LESSER file is relevant.
Signed-off-by: Jaap Crezee <jaap@jcz.nl>
[Arnout: regenerate with scanpypi, fix legal info]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
A number of autobuilder failures are due to the fact that autobuilder
instances use old distributions, with old SSL certificates, and
therefore wget aborts with an error "The certificate of `xyz.org' is
not trusted.".
In order to avoid such failures that are not very interesting in the
context of the autobuilders, we pass --no-check-certificate to
wget. The integrity of the downloaded files is anyway verified by the
hashes, and this is only meant to be used in the context of
testing/CI, not in production.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Fixes the following security issues:
- Fix for inspector DNS rebinding vulnerability (CVE-2018-7160): A malicious
website could use a DNS rebinding attack to trick a web browser to bypass
same-origin-policy checks and allow HTTP connections to localhost or to
hosts on the local network, potentially to an open inspector port as a
debugger, therefore gaining full code execution access. The inspector now
only allows connections that have a browser Host value of localhost or
localhost6.
- Fix for 'path' module regular expression denial of service
(CVE-2018-7158): A regular expression used for parsing POSIX paths could
be used to cause a denial of service if an attacker were able to have a
specially crafted path string passed through one of the impacted 'path'
module functions.
- Reject spaces in HTTP Content-Length header values (CVE-2018-7159): The
Node.js HTTP parser allowed for spaces inside Content-Length header
values. Such values now lead to rejected connections in the same way as
non-numeric values.
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back in 2013, zsh was added to Buildroot [1] with the dependency on
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS. This dependency was keept with the
refactoring [2].
But Busybox doesn't provide a zsh shell in the firt place.
This dependency can be removed.
[1] 3d19b7ef59
[2] 1dbd7b9910
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Phil Eichinger <phil.eichinger@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: André Hentschel <nerv@dawncrow.de>
[Thomas:
- remove LIBKRB5_VERSION_MAJOR
- minor tweaks to commit title and Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Synopsys DesignWare HSDK (which stands for ARC HS
Development Kit) is the latest and greatest development
platform that sports quad-core ARC HS38 in real silicon.
Most noticeable features of the board are:
* Quad-core ARC HS38 CPU running at 1GHz
* 4Gb of DDR
* Built-in Vivante GPU (well supported via open source
Etnaviv drivers)
* Built-in Wi-Fi/Bluetooth module (RedPine RS-9113)
And as usual we have:
* [micro] SD-card slot
* 2 USB 2.0 ports
* 1Gbit Ethernet port
* Built-in Digilent JTAG probe
* Serial port accessible via micro-USB port
Writing sdcard.img on SDcard creates two partitions:
* FAT32 with uImage and uboot.env
* EXT4 with root filesystem
We modify kernel config because in default hsdk kernel config
CONFIG_INITRAMFS_SOURCE parameter is set and when we build
rootfs separately (BR2_TARGET_ROOTFS_INITRAMFS is not set)
error appears. Also we set up CONFIG_ARC_UBOOT_SUPPORT which
enables usage of uboot variables in the boot process.
[Peter: Fix comments and rename defconfig to snps_archs38_hsdk_defconfig,
Add defconfig to DEVELOPERS and fixup board/synopsys entry,
Drop postimage script, rename env file in genimage.cfg and drop size
setting for rootfs partition,
Add "" for CONFIG_INITRAMFS_SOURCE in linux fragment]
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Cc: arc-buildroot@synopsys.com
Reviewed-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need ":0.0 vt01" to make sure Xorg finds the correct terminal.
Quoting https://www.x.org/archive/X11R6.8.0/doc/Xorg.1.html
-allowMouseOpenFail
Allow the server to start up even if the mouse device can't be
opened or initialised.
We need this option in case BR2_PACKAGE_XDRIVER_XF86_INPUT_MOUSE was
not enabled.
-noreset
prevents a server reset when the last client connection is closed.
We need this option to prevent auto-close of Xorg.
Tested with a qemu image and Kodi.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: copy an abbreviate version of the explanation above to the
script.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, when a filename contains characters not representable in the
user's locale, we fail hard, especially when the host python is python3.
This is because python2 and python3 handle encoding/decoding strings
differently, with python3 presumable doing the right thing, but it
breaks on some systems, while python2 presumable does the wrong thing,
but it works everywhere. (Just joking, obviously...)
Part of the issue being that the csv reader in python2 is broken with
UTF8.
We fix the issue by ditching the csv reader, and simply read the file in
binary mode, manually partitioning the lines on the first comma.
Then, we use the binary-encoded (really, un-encoded) package names and
filenames as values and keys, respectively.
Finally, for each filename or package we need to print, we try to decode
them with the defaults for the user settings, but catch any decoding
exception and fall back to dumping the raw, binary values. Which codec
is used by default differs between Python version, but in all cases
something sane is printed at least.
Thanks a lot to Arnout for the live help doing this patch. :-)
Reported-by: Jaap Crezee <jaap@jcz.nl>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Jaap Crezee <jaap@jcz.nl>
[Arnout: commit log improvement]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Up to now, Raspberry Pi Zero W (rpi0w) could be built with the normal
raspberrypi0_defconfig. However, then you don't have support for the
Bluetooth out-of-the-box, which makes using a W a bit pointless.
Therefore, create a separate defconfig for the W. It is a copy of
raspberrypi0_defconfig with the following changes:
- Add DT overlays (from rpi-firmware) to support Bluetooth.
- Pass --add-pi3-miniuart-bt-overlay to post-image.sh.
Since there is now a separate raspberrypi0w_defconfig, the W support
can be removed from raspberrypi0_defconfig.
Signed-off-by: Yves Deweerdt <yves.deweerdt.linux@gmail.com>
[Arnout:
- Bump to same kernel version as raspberrypi0.
- Remove redundant comment.
- Remove redundant default BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS=y.
- Improve commit log.
- Refresh .gitlab-ci.yml.
]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Commit c868095681 ("toolchain: fix
detection of SSP support") fixed the SSP check so that it does the
correct thing for nios2 toolchains. While this commit fixed the
description of the Sourcery NIOSII toolchain, it didn't fix the
description for the autobuilders of the br-nios2-glibc toolchain,
causing some build failures. This commit adjusts br-nios2-glibc.config
to indicate that the toolchain doesn't have SSP support.
Fixes:
http://autobuild.buildroot.net/results/6c44e328b7bffd8474d29d5bdf1ea109ec15f4ad/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since version 0.28 ncmpc only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Add a hash for the license file.
Add a nmpc entry for myself in DEVELOPERS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit ea9669fffa ("core: kill
DEPENDENCIES_HOST_PREREQ"), the core-dependencies make target was
removed, and is now named just "dependencies".
This broke the utils/genrandconfig script, and this commit intends to
fix that.
Since this script is part of the Buildroot tree, it is provided
together with Buildroot, so we don't need to support the legacy
core-dependencies target. Someone checking out an older Buildroot will
have a working setup, with support/dependencies exposing
core-dependencies and utils/genrandconfig using core-dependencies. The
only broken situation will be between
ea9669fffa and this commit, but that's
not a sufficient reason to add some backward compatibility code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages that use libtool really need some love to be able to
disable C++ support.
This is because libtool will want to call AC_PROG_CXXCPP as soon as CXX
is set non-empty to something different from 'no'. Then, AC_PROG_CXXCPP
will want a C++ preprocessor that works on valid input *and* fail on
invalid input.
So, providing 'false' as the C++ compiler will then require that we do
have a working C++ preprocessor. Which is totally counter-productive
since we do not have a C++ compiler to start with...
bd39d11d2e (core/infra: fix build on toolchain without C++) was a
previous attempt at fixing this, by using the host's C++ preprocessor.
However, that is very incorrect (that's my code, I can say so!) because
the set of defines will most probably be different for the host and the
target, thus causing all sorts of trouble. For example, on ARM we'd have
to include different headers for soft-float vs hard-float, which is
decided based on a macro, which is not defined for x86, and thus may
redirect to the wrong (and missing) header.
Instead, we notice that libtool uses the magic value 'no' to decide that
a C++ compiler is not available, in which case it skips the call to
AC_PROG_CXXCPP.
Given that 'no' is not provided by any package in Debian and
derivatives, as well as in Fedora, we can assume that no system will
have an executable called 'no'. Hence, we use that as a magic value to
disable C++ detection altogether.
Fixes: #10846 (again)
Reported-by: Damien Riegel <damien.riegel@savoirfairelinux.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Damien Riegel <damien.riegel@savoirfairelinux.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0003-tar-unzip-postpone-creation-of-symlinks-with-suspici.patch now upstream.
>From the release notes:
Bug fix release. 1.28.2 has fixes for tcpsvd (fixed fallout from
opt_complementary removal), udhcpd (do not ignore SIGTERM), tar and unzip
(reverted to previous, more permissive symlink handling), ssl_client (fixed
option parsing).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump at91sam9x5ek, atmel_sama5d27_som1_ek, atmel_sama5d2_xplained,
atmel_sama5d3_xplained, and atmel_sama5d4_xplained all variants to
linux4sam_5.8. The 3 foundation components have their tags changed
(AT91Bootstrap, U-Boot, Linux kernel).
at91bootstrap 3.8.10 is required to support gcc7.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Cc: Nicolas Ferre <nicolas.ferre@microchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Constructed ASN.1 types with a recursive definition could exceed the stack
(CVE-2018-0739)
Constructed ASN.1 types with a recursive definition (such as can be found in
PKCS7) could eventually exceed the stack given malicious input with
excessive recursion. This could result in a Denial Of Service attack.
There are no such structures used within SSL/TLS that come from untrusted
sources so this is considered safe.
Incorrect CRYPTO_memcmp on HP-UX PA-RISC (CVE-2018-0733)
Because of an implementation bug the PA-RISC CRYPTO_memcmp function is
effectively reduced to only comparing the least significant bit of each
byte. This allows an attacker to forge messages that would be considered as
authenticated in an amount of tries lower than that guaranteed by the
security claims of the scheme. The module can only be compiled by the HP-UX
assembler, so that only HP-UX PA-RISC targets are affected.
rsaz_1024_mul_avx2 overflow bug on x86_64 (CVE-2017-3738)
This issue has been reported in a previous OpenSSL security advisory and a
fix was provided for OpenSSL 1.0.2. Due to the low severity no fix was
released at that time for OpenSSL 1.1.0. The fix is now available in
OpenSSL 1.1.0h.
There is an overflow bug in the AVX2 Montgomery multiplication procedure
used in exponentiation with 1024-bit moduli. No EC algorithms are affected.
Analysis suggests that attacks against RSA and DSA as a result of this
defect would be very difficult to perform and are not believed likely.
Attacks against DH1024 are considered just feasible, because most of the
work necessary to deduce information about a private key may be performed
offline. The amount of resources required for such an attack would be
significant. However, for an attack on TLS to be meaningful, the server
would have to share the DH1024 private key among multiple clients, which is
no longer an option since CVE-2016-0701.
This only affects processors that support the AVX2 but not ADX extensions
like Intel Haswell (4th generation).
For more details, see https://www.openssl.org/news/secadv/20180327.txt
The copyright year changed in LICENSE, so adjust the hash to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes (https://lwn.net/Articles/750103/):
E2fsprogs 1.44.0 introduced a regression introduced which caused e2fsck
to fail to support HTree directories on big-endian systems. Fix how we
read block numbers for internal htree nodes.
Removed a potential memory leak from fsck.
E2image now correctly creates e2image files for bigalloc file systems.
Dumpe2fs and debugfs now correctly support e2image files for file
systems that have the meta_bg option enabled.
E2fsck and debugfs now correctly handle delete inodes (including
processing the orphaned inode list in the case of e2fsck) for bigalloc
file systems. (Addresses Google Bug: #73795618)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/f1c6494133806b9fc26ae3ce9e9c6a22fa2eda6f/
Commit 6205b75873 (sngrep: gnutls support also needs libgcrypt) ensured
that --with-gnutls is only used when both gnutls and libgcrypt are enabled,
but it didn't ensure libgcrypt gets built before sngrep or told the
configure script where to find libgcrypt-config, breaking the build.
Fix both issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable static build. gawk builds statically just fine. The shared
library check has been removed in 4.1.1.
Remove the symlink force hunk from the no-versioned patch. The only user
of LN is in the part that this patch disables.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix seed variable name for the wait3 system call AC_TRY_RUN test.
Remove manual installation; not needed anymore.
Cc: Will Newton <will.newton@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2017-12627: dereference of a NULL pointer while processing the path
to the DTD.
xerces 3.2.1 includes this patch. But this version also added
AC_RUN_IFELSE to its configure script, making cross compilation harder.
Switching to cmake is also problematic since the minimum required cmake
version is 3.2.0. The host dependencies check currently allows minimum
cmake version 3.1.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lshw is seldomly released, so its data files become easily
outdated. Instead, this commit makes use of the data files provided by
hwdata. This is easily possible because lshw looks for the files in
several directories, including /usr/share/hwdata, where the hwdata
collection is installed.
We remove the entire /usr/share/lshw directory, where the not very
up-to-date data files where installed. Four files were installed
there: pci.ids, usb.ids (which are now provided by hwdata), manuf.txt
and oui.txt (which are not used at run time).
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
[Thomas:
- rework commit log
- replace patch by a simple removal of the /usr/share/lshw directory
- add "runtime" comment in Config.in for the BR2_PACKAGE_LSHW
dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since D-Bus 1.9.18, the recommended location for the system and
session busses configuration files is /usr/share instead of /etc. From
the D-Bus NEWS file:
D-Bus 1.9.18 (2015-07-21)
==
The “Pirate Elite” release.
Configuration changes:
• The basic setup for the well-known system and session buses is now done
in read-only files in ${datadir}, moving a step closer to systems
that can operate with an empty /etc directory. In increasing order
of precedence:
· ${datadir}/dbus-1/s*.conf now perform the basic setup such as setting
the default message policies.
· ${sysconfdir}/dbus-1/s*.conf are now optional. By default
dbus still installs a trivial version of each, for documentation
purposes; putting configuration directives in these files is
deprecated.
· ${datadir}/dbus-1/s*.d/ are now available for third-party software
to install "drop-in" configuration snippets (any packages
using those directories should explicitly depend on at least this
version of dbus).
· ${sysconfdir}/dbus-1/s*.d/ are also still available for sysadmins
or third-party software to install "drop-in" configuration snippets
· ${sysconfdir}/dbus-1/s*-local.conf are still available for sysadmins'
overrides
${datadir} is normally /usr/share, ${sysconfdir} is normally /etc,
and "s*" refers to either system or session as appropriate.
Therefore, this commit adjusts the Avahi package to install the D-Bus
related files to /usr/share/dbus-1/system.d.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The uCLS1012A-SOM product family (ucls1012a) is an Arcturus Networks Inc.
64bit ARM Cortex-A53 class System on Module powered by a NXP QorIQ LS1012A
Low Power Communication Processor. This 314 pin MXM3.0/SMARC module card
contains DDR3, QSPI NOR Flash, eMMC NAND Flash, optional Audio CODEC and is
available with 1 or 2 Gig-Ethernet PHYs.
Signed-off-by: Oleksandr Zhadan <oleks@arcturusnetworks.com>
Signed-off-by: Michael Durrant <mdurrant@arcturusnetworks.com>
Changes v1 -> v2:
- updated kernel and u-boot source repositories to github
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This variable, like BR2_DL_DIR, is designed to be overridable from the
environment. Unlike BR2_DL_DIR, it is not documented as such in the
Config.in help text. Do so now.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 361d1b969e defines FIRMWARE_DIR for
bluez5_utils. The compatibility symlink for the firmware is no longer
needed.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
-Ofast (introduced in GCC 4.6) It combines the existing optimization level -O3
with options that can affect standards compliance but result in better optimized
code. For example, -Ofast enables -ffast-math.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Upgrading a tweaked configuration is painful, so stay with the
upstream configuration which is already installed, and just apply a
few patches.
Everybody could do its own configuration in its root filesystem
overlay.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Thomas: squash patches.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Really fix commit 6729050f3a
That commit added a script to "toolchain" post install staging hooks.
This will only be executed if TOOLCHAIN_INSTALL_STAGING is set to YES.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently there is only logic to enable PAM when linux-pam is selected.
However, busybox will fail to build with PAM enabled if the linux-pam
package has not been built before. So we should forcibly disable PAM in
busybox in that case.
Normally this is not an issue since our default busybox config doesn't
have PAM enabled. However, if you enable linux-pam, then save the
busybox config to a custom configuration file, then disable linux-pam
again, and then do a "make clean; make", the build will fail. A more
practical situation where this can occur is when the same custom
busybox config is used in a Buildroot config with and without
linux-pam.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After commit 6729050f3a nothing creates
$(HOST_DIR)/share/buildroot anymore, causing sdk to fail with:
/bin/bash: .../output/host/share/buildroot/sdk-location: No such file or directory
Add creation of that directory to the "sdk" build steps itself.
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the removal of $(HOST_DIR)/usr, the symbolic link from
$(HOST_DIR)/bin/sam-ba/ to $(HOST_DIR)/opt/sam-ba/sam-ba was broken,
so we fix this.
In addition, sam-ba being prebuilt, it comes in two separates
binaries, one for x86 and the other for x86_64, so we take this into
account as well.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
[Thomas:
- add spaces around = signs
- rework commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following error occures in the udev init script because the kernel config
may optionally not include uevent_helper.
/etc/init.d/S10udev: line 47: can't create /proc/sys/kernel/hotplug: nonexistent directory
Work around this by not trying to access the destination if it's not available.
Signed-off-by: Joshua Henderson <joshua.henderson@microchip.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Download site moved to strace.io. No upstream provided hashes.
Drop the musl specific autoconf seed values. These values are now
detected correctly.
Add --enable-mpers=check to fix configure on aarch64 that does not
support binaries for the compat personality.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit moves the host-fakedate dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper regular dependency handled by the
package infrastructure.
host-fakedate is added as dependency to all packages, except
host-skeleton, because we depend on it.
In addition, we make sure that host-fakedate does not grow a
dependency on host-{tar,xz,lzip,ccache} to avoid circular
dependencies. host-fakedate does not need any extraction tool and does
not need to build C/C++ code (the source code is just a shell script
available in Buildroot).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-ccache dependency handling from
DEPENDENCIES_HOST_PREREQ to a proper package dependency. When
BR2_CCACHE=y, we add host-ccache as a regular dependency of all
packages except:
- The extractor packages host-tar, host-xz and host-lzip
- host-ccache itself
- host-skeleton, because all packages depend on it
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-lzip dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-lzip.mk fills in the
BR2_LZIP_HOST_DEPENDENCY with host-lzip if building a host-lzip is
needed. The name BR2_LZIP_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_LZIP_HOST_DEPENDENCY is added to all packages, except:
- host-lzip, because we would otherwise depend on ourself.
- host-tar, because lzip itself is delivered as a tarball, so we need
to have host-lzip depend on host-tar, and not host-tar depend on
host-lzip
- host-skeleton, because we need to have host-lzip depend on
host-skeleton, and not the opposite.
We also mutually exclude host-lzip and host-xz from dependending on
each other, to avoid a circular dependency.
In addition, we modify lzip.mk to explicitly build host-lzip without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.
[Peter: fix s/host-tar/host-lzip/ typo, fix s/xz/lzip/ typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-xz dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-xz.mk fills in the
BR2_XZ_HOST_DEPENDENCY with host-xz if building a host-xz is
needed. The name BR2_XZ_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_XZ_HOST_DEPENDENCY is added to all packages, except:
- host-xz, because we would otherwise depend on ourself.
- host-tar, because xz itself is delivered as a tarball, so we need
to have host-xz depend on host-tar, and not host-tar depend on
host-xz
- host-skeleton, because we need to have host-xz depend on
host-skeleton, and not the opposite.
In addition, we modify xz.mk to explicitly build host-xz without
ccache. We generally took the approach of building host-ccache *after*
all the extractors have been built.
[Peter: fix s/host-tar/host-xz/ typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This moves the host-tar dependency handling from
DEPENDENCY_HOST_PREREQ to an extract dependency.
To achieve that, check-host-tar.mk fills in the
BR2_TAR_HOST_DEPENDENCY variable with host-tar if building a host-tar
is needed. The name BR2_TAR_HOST_DEPENDENCY has been chosen because it
matches the name BR2_CMAKE_HOST_DEPENDENCY already used in
check-host-cmake.mk.
The BR2_TAR_HOST_DEPENDENCY is added to all packages, except host-tar
itself (obviously) and host-skeleton, because we depend on
host-skeleton to install host-tar properly in HOST_DIR.
In addition, we modify tar.mk to explicitly build host-tar without
ccache: since ccache source code is available as a tarball, ccache
will obviously depend on host-tar if the system tar is insufficient.
Finally, to make things really clean, we also add
$(BR2_TAR_HOST_DEPENDENCY) to the dependencies of the tar filesystem
format, since it requires tar, so we'd better make sure we have a
suitable tar.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extract dependencies are dependencies that must be ready before the
extract step of a package, i.e for tools that are needed to extract
packages themselves. Current examples of such tools are host-tar,
host-lzip and host-xz.
They are currently handled through DEPENDENCIES_HOST_PREREQ. However,
this mechanism has a number of drawbacks:
- First and foremost, because host-tar/host-lzip/host-xz are not
listed in the dependencies of packages, the package infrastructure
does not know it should rsync them in the context of per-package
SDK.
- Second, there is no dependency handling *between* them. I.e, we
have no mechanism that says host-tar should be built before
host-lzip, while it is in fact the case: if you need to build
host-lzip, you need to extract a tarball, so you may need host-tar
if your system tarball is not capable enough.
For those reasons, it makes sense to add explicit support for "extract
dependencies" in the package infrastructure, through the
<pkg>_EXTRACT_DEPENDENCIES variable. It is unlikely this variable will
ever be used by a package .mk file, but it will be used internally by
the package infrastructure.
[Peter: fix typo in manual]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the toolchainfile.cmake and Buildroot.cmake files are
installed outside of any package, just triggered by the toolchain
target.
As part of the per-package SDK effort, we are trying to avoid anything
that installs to the global $(HOST_DIR), and this is one of the
remaining files installed in $(HOST_DIR) outside of any package. We
fix this by installing such files as part of the toolchain package
post-install staging hooks.
Yes, a post-install staging hook to install things to $(HOST_DIR) is a
bit weird, but the toolchain infrastructure is made of target packages
only, and they all install a lot of stuff to $(HOST_DIR) already.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the per-package SDK work, we want to avoid having logic
that installs files to the global HOST_DIR, and instead do it inside
packages. One thing that gets installed to the global HOST_DIR is the
minimal "skeleton" that we create in host:
- the "usr" symbolic link for backward compatibility
- the "lib" directory, and its lib64 or lib32 symbolic links
This commit moves this logic to a new host-skeleton package, and makes
all packages (except itself) depend on it.
While at it, use $(Q) instead of @ in the HOST_SKELETON_INSTALL_CMDS.
[Peter: drop host-patchelf reference in commit message]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xfsprogs uses a local definition of struct fsxattr when the kernel
provided one in linux/fs.h is too old. The preprocessor trickery that
allows to include linux/fs.h without colliding with the local
definitions breaks when source files include linux/fs.h on their own.
Add a patch that removes these local includes.
Fixes:
http://autobuild.buildroot.net/results/3aa/3aad812582d94b76d204436d2879bfa732c34da6/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sometimes imximage throws the following error:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6sxsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
Later on, when running mkimage for the u-boot.imx it will succeed in
finding the IVT offset.
Looks like some race condition happening during parallel build when
processing mkimage for u-boot-dtb.imx and u-boot.imx.
A proper fix still needs to be implemented, but as a workaround let's
remove the error when the IVT offset is not found.
It is useful to have such message, especially during bring-up phase,
but the build error that it causes is severe, so better avoid the
build error for now.
The error checking can be re-implemented later when we have a proper
fix.
This workaround has already been applied in mainline U-Boot:
http://git.denx.de/?p=u-boot.git;a=commit;h=b5b0e4e351e20a606de22db6a56ad6bc1e2aa8fd
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/59015347
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the woff2 package to Builroot. This is needed by webkitgtk from
version 2.20.0 onwards. WebKitGTK+ used to bundle a copy of the library,
but it stopped doing so now that the upstream is has been making
releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the brotli package to Buildroot. This is needed by woff2, which in
turn is needed by webkitgtk from version 2.20.0 onwards. WebKitGTK+ used
to bundle a copy of the library, but it stopped doing so now that the
upstream has started making releases.
[Peter: fix license hash]
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0001-Use-z-muldefs-to-avoid-the-multiple-definitions-bug-.patch and
0003-Remove-some-extra-const-that-gcc-complains-about.patch as they are now
upstream.
The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.
Drop dependency on !musl as it is now support since e04281e60cf0d
(makeguids: Ensure compatibility with other libcs).
Drop BINTARGETS workaround as this is fixed since 6c674283697 (Don't build
static by default).
Drop popt dependency as it is no longer needed since 1aec5e7891 (Replace
popt usage with getopt_long in efivar.c).
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
efibootmgr uses host-pkgconf and popt, so explicitly add them to
_DEPENDENCIES instead of relying on them getting pulled in by efivar.
[Peter: reword as suggested by Thomas]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Leave both _VERSION_MAJOR and _VERSION to reduce churn. We are likely to
need _MAJOR on the next bump.
Drop ac_cv_header_sys_timex_h override; not needed with current
uClibc-ng.
Drop scanf_cv_type_modifier override; not used in configure script since
v2.21.
Drop upstream patch.
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable SSP if the toolchain does not support it. This must be done
explicitly because configure enables hardening by default but doesn't
contain a link test, so it doesn't detect when libssp is missing.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It depends on tpm2-tss, whose current version contains C++ code.
[Peter: add dependency to config option]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 1.4.0 still contains some C++ code. This has already changed on
upstream, so future versions will drop the dependency on a C++ compiler.
[Peter: fix indentation, add dependency to config option]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop 0001-dont-use-fshort-wchar-when-building.patch and
0003-Remove-extra-const-keywords-gcc-7-gripes-about.patch as they are now
upstream.
The upstream repo moved to the 'rhboot' github project, so adjust upstream
URL in .mk and help text to match.
Version 15 introduces build time configuration of the default EFI directory
(E.G. the subdirectory in the EFI system partition where the loader is
installed). This used to be hardcoded to redhat, but now a value must be
specified at build time. Given that, it is unlikely that people relied on
the default value so set it to the more sensible 'buildroot'.
While we are at it, also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
powerpc-utils changed upstream git repositories again.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prevent out-of-bounds write in codebook decoding.
Codebooks that are not an exact divisor of the partition size are now
truncated to fit within the partition.
Upstream has migrated from subversion to git, so change to git and bump the
version to include the fix for CVE-2018-5146.
While we're at it, also add a hash file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
Use after free when server is disconnected during netsplits. Incomplete fix
of CVE-2017-7191. Found by Joseph Bisch. (CWE-416, CWE-825) -
CVE-2018-7054 [2] was assigned to this issue.
Use after free when SASL messages are received in unexpected order. Found
by Joseph Bisch. (CWE-416, CWE-691) - CVE-2018-7053 [3] was assigned to
this issue.
Null pointer dereference when an “empty” nick has been observed by Irssi.
Found by Joseph Bisch. (CWE-476, CWE-475) - CVE-2018-7050 [4] was assigned
to this issue.
When the number of windows exceed the available space, Irssi would crash due
to Null pointer dereference. Found by Joseph Bisch. (CWE-690) -
CVE-2018-7052 [5] was assigned to this issue.
Certain nick names could result in out of bounds access when printing theme
strings. Found by Oss-Fuzz. (CWE-126) - CVE-2018-7051 [6] was assigned to
this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TPM (Trusted Platform Module) 2.0 CLI tools based on system API of
TPM2-TSS. These tools can be used to manage keys, perform
encryption/decryption/signing/etc crypto operations, and manage
non-volatile storage through a TPM2.0 HW implementation.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a system daemon implementing the TPM2 access broker (TAB) &
Resource Manager (RM) spec from the TCG. The daemon (tpm2-abrmd) is
implemented using Glib and the GObject system.
Communication between the daemon and clients using the TPM is done with
a combination of DBus and Unix pipes. DBus is used for discovery,
session management and the 'cancel', 'setLocality', and 'getPollHandles'
API calls (mostly these aren't yet implemented). Pipes are used to send
and receive TPM commands and responses (respectively) between client and
server.
The daemon owns the com.intel.tss2.Tabrmd name on dbus. It can be
configured to connect to either the system or the session bus.
The package also provides a client library for interacting with the
daemon via TPM Command Transmission Interface (TCTI). It is intended for
use with the SAPI library (libsapi) like any other TCTI.
[Peter: drop add default DAEMON_ARGS to init script, drop /etc/default file,
drop S30devtpmperms and fix permissions in S80tpm2-abrmd]
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Improved compliance to the last public review spec and some bug fixes.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Followingig a suggestion from Peter Korsgaard, remove the restriction to
x86 and x86_64. It is preferable to expose the package unless there is a
build time dependency on an architecture or the package is specific to a
certain SoC or board.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As part of the build, we run some instrumentation hooks to gather
statistics about the usage of the target/, staging/ and host/
directories, so that we can generate reports for the user, that
shows:
- for each file, what package installed it,
- for each package,the size that it installed.
In so doing, we run a double md5 pass on all files of the affected
directories (before/after installation). These passes were mostly invisible
when we were only scanning target/, but has greatly increased in time now
that we also scan staging/ and host/ (but only in the corresponding _CMDS,
of course).
This md5 was mostly aimed at catching packages that would "cheat" with
mtime/atime/ctime somehow. They can't really cheat on md5, though [0].
Timings however speak for themselves, with this defconfig (slightly
biggish-but-still-manageable build) [1].
host/ 20965 files 1.2GiB
staging/ 4715 files 333MiB
target/ 1801 files 44MiB
All instrumentation steps, using md5: 19min 27s
All instrumentation steps, using mtime: 14min 45s
No instrumentation step at all: 14min 31s
So, using mtime is an almost-5min improvement, i.e. about 25% faster,
while removing all instrumentation steps does not gain that much more...
So, we switch to using mtime, because in the end that's still good-enough
for our use-case: generating some graphs. It is not mission-critical, and
if a graph is slightly off, that's not a biggy. It can anyway be attributed
to a broken package's buildsystem, which should get fixed.
However, we lose the ability to track directories. Non-empty directories
can be tracked back by a bit of scripting, but empty directories are
simply not caught. If we were to also look for directories using mtime,
we would catch parents of installed files:
- /foo/bar/ exists
- a package installs /foo/bar/buz
- mtime of /foo/bar/ is changed to account for the new file in it.
So we do not track directories at all, and we lose empty directories.
The existing tracking was mostly happenstance, with the original
submission and comments not really accounting for a real use-case.
Now, we also change the way we handle symlinks. Previously, we would
hash the file pointed to by the symlink. Now, we only look at the mtime
of the symlink itself, which still detects modifications.
Eventually, this also means that we now no longer need to establish a
list before the install step; we can now simply run after the install
step, finding any files newer than the build stamp.
[0] Yeah, md5 is very weak, but we're not guarding against malicious
attacks, just about careless modifications.
[1] defconfig used for tests:
BR2_arm=y
BR2_cortex_a7=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_ETNAVIV=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VC4=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_VIRGL=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OSMESA=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_SYSTEMD_JOURNAL_GATEWAY=y
BR2_PACKAGE_SYSTEMD_BACKLIGHT=y
BR2_PACKAGE_SYSTEMD_BINFMT=y
BR2_PACKAGE_SYSTEMD_COREDUMP=y
BR2_PACKAGE_SYSTEMD_FIRSTBOOT=y
BR2_PACKAGE_SYSTEMD_HIBERNATE=y
BR2_PACKAGE_SYSTEMD_IMPORTD=y
BR2_PACKAGE_SYSTEMD_LOCALED=y
BR2_PACKAGE_SYSTEMD_LOGIND=y
BR2_PACKAGE_SYSTEMD_MACHINED=y
BR2_PACKAGE_SYSTEMD_POLKIT=y
BR2_PACKAGE_SYSTEMD_QUOTACHECK=y
BR2_PACKAGE_SYSTEMD_RANDOMSEED=y
BR2_PACKAGE_SYSTEMD_RFKILL=y
BR2_PACKAGE_SYSTEMD_SMACK_SUPPORT=y
BR2_PACKAGE_SYSTEMD_SYSUSERS=y
BR2_PACKAGE_SYSTEMD_VCONSOLE=y
[Peter: tweak commit message, use find -type l]
Reported-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-5146: Prevent out-of-bounds write in codebook decoding.
Drop 0001-CVE-2017-14633-Don-t-allow-for-more-than-256-channel.patch and
0002-CVE-2017-14632-vorbis_analysis_header_out-Don-t-clea.patch as they are
now upstream, and add a hash for the license file while we're at it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enlightenment provide enlightenment.pc and some shared libraries.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The meson build systemd is checking for xkeyboard-config optional
dependency but there is no option to handle it.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-rpath was added by m4/lib-link.m4 with autotools based
buildsystem. Now we use meson, we don't have such option anymore.
The autotools eet-eet and eldbus_codegen options are named respectively
eet and eldbus-codegen with meson.
Fixes:
WARNING: Unknown command line options: "eet-eet, eldbus_codegen, rpath"
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop musl patch, which is not necessary anymore as netinet vs linux
header clash is fixed.
Also add hash for the license files.
musl build successfully tested with:
* armv7-eabihf--musl--stable-2017.05-toolchains-1-1
(GCC 5.4.0, Linux headers 3.10.105, musl 1.1.16)
* armv7-eabihf--musl--bleeding-edge-2018.02-1
(GCC 7.3.0, Linux headers 4.9.80, musl 1.1.18)
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-1000120: curl could be fooled into writing a zero byte out of
bounds when curl is told to work on an FTP URL with the setting to only
issue a single CWD command, if the directory part of the URL contains a
"%00" sequence.
https://curl.haxx.se/docs/adv_2018-9cd6.html
CVE-2018-1000121: curl might dereference a near-NULL address when
getting an LDAP URL.
https://curl.haxx.se/docs/adv_2018-97a2.html
CVE-2018-1000122: When asked to transfer an RTSP URL, curl could
calculate a wrong data length to copy from the read buffer.
https://curl.haxx.se/docs/adv_2018-b047.html
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The `tar` implementation in Busybox 1.28.0 and 1.28.1 won't extract a
rootfs with some symlinks that appear to look "dangerous". This
completely (and silently!) breaks on-target updates via RAUC for me, for
example.
In the meanwhile, upstream already reverted the commit in question
(in their commit a84db18fc71d09e801df0ebca048d82e90b32c6a), so this
patch simply applies that revert in Buildroot. The fix has not made it
to a release, yet.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Bug: https://bugs.busybox.net/show_bug.cgi?id=8411
Bug: https://github.com/rauc/rauc/issues/249
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recently a build failure was reported which was traced back to to the fact
that the user had a TOOLCHAIN_VERSION environment variable set which leads
to a strange looking error message:
toolchain/toolchain/toolchain.mk:40: *** TOOLCHAIN_SITE cannot be empty when
TOOLCHAIN_SOURCE is not. Stop.
Environment variables automatically gets converted to make variables by GNU
make - E.G. from the manual
(https://www.gnu.org/software/make/manual/html_node/Environment.html):
Variables in make can come from the environment in which make is run. Every
environment variable that make sees when it starts up is transformed into a
make variable with the same name and value
So we end up in make with TOOLCHAIN_VERSION set to the value of the
environment variable. As virtual packages do not have a version, there is
no explicit TOOLCHAIN_VERSION = .. line in toolchain.mk overriding this
value, and the logic in package/pkg-generic.mk sets a default value for
TOOLCHAIN_SOURCE when TOOLCHAIN_VERSION is set, and finally errors out as
TOOLCHAIN_SITE isn't set.
As a workaround, explicitly set <pkg>_VERSION and <pkg>_SOURCE to the empty
string in the virtual package infrastructure.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following vulnerabilities:
- CVE-2018-1000098: Crash when parsing SDP with an invalid media format
description
- CVE-2018-1000099: Crash when receiving SDP with invalid fmtp attribute
[Peter: add CVE info]
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script comes from the kernel source, so ignore any code style
warnings for it in order to keep it as close as possible to the original
one, making synchronization between repos easier.
The option --exclude for flake8/pycodestyle is an absolute list and has
a default, so ideally the default values should be added too.
But the use cases for flake8 in the tree are:
- when developing a new script or changing an existing one, the
developer calls flake8 only on that script;
- in the GitLab job, a list of all Python files to be tested is created
and then passed to flake8.
None of these involve calling 'flake8' without parameters, so don't care
about adding the default value.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix these warnings:
E201 whitespace after '['
E202 whitespace before ']'
E501 line too long (138 > 132 characters)
-> isolate the common part of the external toolchain url in a variable
to make the long lines shorter and more readable.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For stop using cma.
git shortlog --invert-grep --grep travis --no-merges 94ccbc8924c12a818d61d36a4b389b74a89fde3c..
Maxime Ripard (1):
mali: Stop using the reserved-memory region to setup the fb area
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host shared libraries produced by CMake were missing a proper
DT_RPATH. That became a problem because the DT_RPATH handling is not
transitive by design.
Consider the following scenario:
- pkg-a provides a library (`liba`) which links to `libpcre`
- pkg-b provides a binary (`foo`) and a shared library (`libb`) which is
needed by that binary
- `libb` links to `liba`
- pkg-a and pkg-b are both built by CMake
In this scenario, `foo` is correctly marked with DT_RPATH pointing to
host/lib/, but that path is not used when (recursively) resolving PCRE's
symbols in `liba`. When attempting to run the `foo` binary, the linker
correctly finds both `liba` and `libb`, but it cannot find the
libpcre.so as built by Buildroot for host.
Signed-off-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The change in commit bf73334232 only works
for newer uboot source trees. Add a check that scripts/dtc/libfdt
directory exists before making this change.
[Peter: add comment explaining why]
Signed-off-by: Stefan Becker <chemobejk@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
docker-proxy is needed by docker-engine at runtime, and was
previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add docker-proxy package to Buildroot. Needed by docker-engine at
runtime, and previously not included. This leads to the following error
when attempting to port-map ports to a container:
$ docker run -p 8080:8080 nginx
docker: Error response from daemon: driver failed programming external
connectivity on endpoint:
exec: "docker-proxy": executable file not found in $PATH.
Docker expects the docker-proxy binary to exist in the PATH.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The T1 QoriQ from NXP has had a few varients of RDB dev boards.
This target is against the latest D4RDB version. Any of the
other versions before D4RDB (plain RDB), may require backing off
the uboot version to SDK 1.6 and/or adjusting the kernel dtb used.
This board configuration provides an upstream kernel build which
has been verified to boot on target.
The target assumes the user still uses the NXP suggested prebuilts
in the SDK2.0 (last release for PowerPC). If a uboot rebuild is
required, the source for SDK2.0 can be found in the following repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replacing the p1010rdb, this board is based on the tower development
system still available by NXP. The board is setup to track upstream
Linux and has been bumped from 4.1 to 4.15 (compared to p1010).
The target does not build uboot and assumes the user still uses the NXP
suggested prebuilts in the SDK2.0 (last release for PowerPC). If a
uboot is required, the source for SDK2.0 can be found in the following
repo.
http://git.freescale.com/git/cgit.cgi/ppc/sdk/u-boot.git/tag/?id=fsl-sdk-v2.0-1703
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly indicate that this package is GPL v2.0+ as well as
provide a hash for the source's license file (COPYING).
Signed-off-by: James Knight <james.d.knight@live.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the confusing and misleading ts5x00 directory to a real reference
platform name, ts5500. The readme.txt file already states the support
for both TS-5500 and TS-5400 platforms.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump the 3.17 kernel used for the Technologic Systems TS-5500 platform
to the latest LTS kernel 4.14.
This fixes the ts5x00_defconfig build with GCC 6.x.
The linux-3.17.config file has been renamed to linux-4.14.config to
match the new kernel version, and its changes are the result of make
linux-update-defconfig. However only comments are affected.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot host programs fail to build when libfdt-devel is installed
system-wide, with errors like this:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit backports an upstream patch that fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libfdt-devel is installed system-wide, the build of U-Boot host
programs currently fails with lots of:
HOSTCC tools/aisimage.o
In file included from tools/../include/../lib/libfdt/libfdt.h:10:0,
from tools/../include/libfdt.h:1,
from tools/fdt_host.h:11,
from tools/imagetool.h:24,
from tools/aisimage.c:8:
/usr/include/libfdt_env.h:70:30: error: conflicting types for ‘fdt64_t’
typedef uint64_t FDT_BITWISE fdt64_t;
^~~~~~~
In file included from <command-line>:0:0:
././include/libfdt_env.h:19:16: note: previous declaration of ‘fdt64_t’ was here
typedef __be64 fdt64_t;
^~~~~~~
In file included from ././include/libfdt_env.h:12:0,
from <command-line>:0:
/usr/include/libfdt_env.h:90:24: error: expected ‘)’ before ‘x’
static inline uint32_t fdt32_to_cpu(fdt32_t x)
^
This commit adds a fixup in the U-Boot code to fix this problem. The
fixup is equivalent to applying upstream commit
http://git.denx.de/?p=u-boot.git;a=commitdiff;h=e0d20dc1521e74b82dbd69be53a048847798a90a,
but we can't use a patch for the uboot package, since people are using
arbitrary versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove mkdata hook as this is not needed since version 1.2.3.
Indeed, when CMAKE_CROSSCOMPILING is defined, ympd will use a perl
script (mkdata.pl) instead of mkdata binary
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ssl.match_hostname() function from Python 3.5.
This function IS available in python 2.7 since 2.7.9, but it doesn't support
matching on IP addresses which is needed for some use cases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On older build systems with old coreutils, using relative symbolic link
(ln -r) does not work, and causes failed builds. Workaround is to use
normal symbolic link with a relative path. e.g. ../../$(BINDIR)
This fix is dependent on bumping cups-filters version to 1.20.1 because
of autotools issue with Makefile.am changes.
Fixes:
http://autobuild.buildroot.net/results/77a6369f3530a2a6a055f7fd664f1ad424274d77
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.
This defconfig also hasn't seen any non-mechanical update since
November 2015.
So it's time to get rid of it, in order to remove the following build
failure:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306938
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch description was missing Upstream-Status tag. It was given in the
commit which added this patch but not in the patch itself as should be.
Signed-off-by tag accidentally didn't follow the usual format.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
systemd meson.build uses values from host /etc/login.defs if
system-uid-max and system-gid-max build options are not explicitly
specified.
Avoid that by setting system-uid-max and system-gid-max to 999 which is
the systemd default if SYSTEM_UID_MAX and SYSTEM_GID_MAX are not set in
/etc/login.defs.
Signed-off-by: Anssi Hannula <anssi.hannula@bitwise.fi>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable libzstd support explicitly to avoid configure failure. The
Buildroot zstd package does not currently install its library.
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
create_hash_file() used basename(licensefile) when it writes the entry for
the license file in the .hash, which is obviously not correct when license
file is locate in a sub directory.
Instead copy the logic from __create_mk_license() to strip the directory
prefix from the absolute filename instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OSS implementation of the TCG TPM2 Software Stack (TSS2). This stack
consists of the following layers from top to bottom:
* System API (SAPI) as described in the system level API and TPM command
transmission interface specification. This API is a 1-to-1 mapping of
the TPM2 commands documented in Part 3 of the TPM2 specification.
Additionally there are asynchronous versions of each command. These
asynchronous variants may be useful for integration into event-driven
programming environments. Both the synchronous and asynchronous API
are exposed through a single library: libsapi.
* TPM Command Transmission Interface (TCTI) that is described in the
same specification. This API provides a standard interface to transmit
/ receive TPM command / response buffers. It is expected that any
number of libraries implementing the TCTI API will be implemented as a
way to abstract various platform specific IPC mechanisms. Currently
this repository provides two TCTI implementations: libtcti-device and
libtcti-socket. The prior should be used for direct access to the TPM
through the Linux kernel driver. The later implements the protocol
exposed by the Microsoft software TPM2 simulator.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Daniel's address is bouncing and my touch on fbgrab is now the most
recent one.
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When verbosive, fbgrab reports pixel format. Green and blue offset and
msb_right fields are accidentally swapped there. This commit adds a patch
which straightens them up.
Upstream-Status: Submitted [Gunnar Monell <gmo@linux.nu>]
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 0.29 MPDs mpc only supports the meson build. Therefore,
adapt the package infrastructure according to the user manual.
Also add a hash for the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 2.13 libmpdclient only supports the meson build.
Therefore, adapt to package infrastructure according to the user manual.
Also add a hash for the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (mostly, out-of-tree) may want to install binary blobs for
another architecture, outside the locations we currently exclude, like
in /opt or whatever...
Add support in check-bin-arch to accept any arbitrary location, that
individual package can each request to excude from the check, when they
are installed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, static libray is always built as BUILD_STATIC_LIBS is ON by
default so correctly set BUILD_STATIC_LIBS depending on BR2_SHARED_LIBS
variable
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The GitHub tag is really "libusbgx-0.2.0" so we end up with a slightly
strange looking version and archive name, but this is correct given the
tag.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig fails to build with gcc 6.x, even though we switched to
using gcc 6.x as the default gcc version in May 2017.
It hasn't been updated since April 2017, and the original submitter,
Fabio Porcedda said:
Unfortunately a newer kernel doesn't boot and I don't have the time
to fix the issue. If having a defconfig that doesn't build on gcc
6.x is unacceptable feel free to remove it.
So, let's get rid of this defconfig, which will remove the following
build error:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306952
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add license hash and fix LICENSE: since November 2016 (release 0.15.2),
libupnpp is licensed under LGPL-2.1+ and not GPL-2.0+
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed or improved security issues:
CVE-2016-1549 (fixed in 4.2.8p7; this release adds protection): A
malicious authenticated peer can create arbitrarily-many ephemeral
associations in order to win the clock selection algorithm
CVE-2018-7182: Buffer read overrun leads to undefined behavior and
information leak
CVE-2018-7170: Multiple authenticated ephemeral associations
CVE-2018-7184: Interleaved symmetric mode cannot recover from bad
state
CVE-2018-7185: Unauthenticated packet can reset authenticated
interleaved association
CVE-2018-7183: ntpq:decodearr() can write beyond its buffer limit
Drop patch #3. libntpq_a_CFLAGS now includes NTP_HARD_CFLAGS via
AM_CFLAGS.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ts4900 defconfig currently fails to build because it selects
kernel headers 4.12, but doesn't specify a kernel version, and
therefore 4.15 is built causing the following error:
Incorrect selection of kernel headers: expected 4.12.x, got 4.15.x
In commit 7c3a7d808e ("configs/ts4900:
bump kernel version to 4.12"), when this defconfig was switched from
using a vendor provided kernel to the mainline kernel, the kernel
version was no longer explicitly specified.
Since this commit indicated 4.12, and the kernel headers version
selected is also 4.12, we also use that as the fixed kernel version.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306955
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Wireless support ends up enabling CONFIG_SYSTEM_TRUSTED_KEYRING, which
requires openssl to be available on the host, so disable wireless
support, which isn't needed in Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ORC unwinder requires libelf to be available on the host, so use
the frame pointer unwinder instead. Using the frame pointer unwinder
is probably good enough in our default Qemu configurations.
Wireless support ends up enabling CONFIG_SYSTEM_TRUSTED_KEYRING, which
requires openssl to be available on the host, so disable wireless
support, which isn't needed in Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as CONFIG_UNWINDER_ORC)
require building a host program that needs libelf.
Users who have libelf installed on their system won't see a problem,
but users who don't have libelf installed will get a build
failure. Therefore, this commit adds an option that allows a user to
indicate that his Linux kernel configuration requires libelf. When
this option is enabled, we add host-elfutils to the dependencies of
the linux package (host-elfutils provides the libelf library).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Linux kernel configuration options (such as
CONFIG_SYSTEM_TRUSTED_KEYRING) require building a host program called
extract-cert, which itself needs OpenSSL.
Users having OpenSSL installed on their system won't see a problem,
but users who don't have OpenSSL installed will get a build
failure. This commit adds a new option that allows users to indicate
that their Linux configuration requires building host-openssl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We were passing HOSTCFLAGS="$(HOSTCFLAGS)" to Linux. However:
- HOSTCFLAGS in Buildroot doesn't exist, and is empty, so this
assignment never did anything. The name of the variable in
Buildroot in HOST_CFLAGS.
- HOSTCFLAGS in Linux isn't used everywhere, and passing it overrides
the default HOSTCFLAGS value defined in the main Linux kernel
Makefile.
In addition, there is no way to pass additional host LDFLAGS in the
Linux kernel build system.
Therefore, we simply shoehorn our HOST_CFLAGS and HOST_LDFLAGS while
passing HOSTCC to the Linux kernel build system. This has been tested
to work fine with host OpenSSL and host libelf only available in
$(HOST_DIR).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable man pages and pdf build to avoid dependency on docbook and
dblatex.
Drop upstream patch.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove also a redundant dot from description text.
Add upstream hashes, and a license file hash.
Cc: Francisco Gonzalez <gzmorell@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to version 2018.01 and kernel to 4.15.7.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This defconfig currently fails to build the Linux kernel:
https://gitlab.com/buildroot.org/buildroot/-/jobs/55306826
In addition, the U-Boot build had already been removed in commit
12c01e4a05
("configs/freescale_mpc8315erdb: remove U-Boot build"), back in
October 2016, and nobody bothered fixing it.
This defconfig was originally contributed and maintained by Gustavo
Zacarias, but he is no longer active in Buildroot, and nobody
expressed interest in this defconfig, so let's get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I would like to help maintaining the following defconfigs:
imx23evk_defconfig
imx6-sabreauto_defconfig
imx7dpico_defconfig
mx25pdk_defconfig
mx51evk_defconfig
mx53loco_defconfig
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent systemd bump has broken DBus dameon and DBus applications can no
longer find the daemon. So we want to catch those kind of failures
early.
We also want to check that the system as a whole is stable: no unit
should be failed.
Finally, ensure that we can read the jounrnal, even when we are doing our
tricks on read-only systems.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we handle the factory by redirectoring /var with a symlink at
build time, and with some trickery during the filesystem generation,
depending on whether we need to remount the filesystem read-write or
not.
However, this is causing quite some pain with the latest systemd, now that
they have moved their dbus socket to /run instead of /var/run.
As such, trying to play tricks with /var/run as a symlink is difficult,
because at times it is in .usr/share/factory/var/run (during build) and
then it is in /var/run (at runtime). So a relative symlink is not
possible. But an absolute symlink is not possible either, because we are
installing out-of-tree.
Oh the joys of cross-compilation... :-)
We fix all this mess by making /var a real directory from the onset, so
that we can use the runtime-expected layout even during the build.
Then, during filesystem generation, we move /var away to the factory,
and populate it as we used to do. This still requires a post-fs hook to
restore /var after the filesystem generation.
This leaves a situation that, should the filesystem generation fails,
/var will be left in an inconsistent state. But that is not worse than
what we already had anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Adam Duskett <aduskett@gmail.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a RO root with systemd, it is intended that /var/lib should be
populated at boot time by tmpfiles system mirroring it from
/usr/share/factory/var/lib.
However, this will only happen if /var/lib does not already exist at the
time systemd-tmpfiles runs. If it does exist, then tmpfiles will
(silently) skip it and do nothing.
It turns out /var/lib will exist, because some part of systemd creates
/var/lib/systemd/catalog on boot before tmpfiles runs.
The fix used here is to also create tmpfiles entries for the contents of
/var/lib/* and /var/lib/systemd/*. This way, when those directories
already exist, the entire tree is not skipped and instead the
not-yet-existing contents of /var/lib and /var/lib/systemd will be still
be mirrored from the factory dir.
And if /var/lib/systemd, or a prefix of that, stops getting created and
does not exist, it'll still mirror properly.
It does cause some warnings from systemd:
systemd[1]: Starting Create Volatile Files and Directories...
systemd-tmpfiles[148]: [/etc/tmpfiles.d/var-factory.conf:7] Duplicate line for path "/var/lib/systemd", ignoring.
systemd-tmpfiles[148]: [/etc/tmpfiles.d/var-factory.conf:8] Duplicate line for path "/var/lib/systemd/coredump", ignoring.
But they can be ignored.
IMHO, I think a better solution would be for systemd-tmpfiles to gain a
"merge tree" operation that is like "C" but doesn't abort if the
destination exists, but rather merges the source into it.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
[yann.morin.1998@free.fr: slight rework of commit title]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages really want to use an UTF-8 locale, or they break.
However, there is no guarantee that any given locale is available on a
system. For example,, while most mainstream distros (Debian and
derivatives, Fedora...) do have the generic, language-agnostic C.UTF-8
locale, Gentoo does not provide it.
So, find the first UTF-8 locale available on the system, and take any
that is available. We however do favour using the user-set current
locale, then using the language-agnostic C.UTF-8, and eventually any
random UTF-8 locale.
Note: we only need to enforce LC_ALL, because setting it implies
everything else:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
1. If the LC_ALL environment variable is defined and is not null,
the value of LC_ALL shall be used.
"""
[Peter: use same regexp as in dependencies.sh]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the UTF-8 locales in mainstream distributions all are suffixed
with just 'utf8', the nomenclature is a bit ambiguous with the way they
are to be specified with the various LC_* variables, suffixed there with
'UTF-8'.
Also, POSIX, ISO, and IEC do not enforce any specific suffix in LC_*
variables:
http://pubs.opengroup.org/onlinepubs/9699919799/basedefs/V1_chap08.html#tag_08_02
"""
If the locale value has the form:
language[_territory][.codeset]
it refers to an implementation-provided locale, where settings of
language, territory, and codeset are implementation-defined.
"""
To avoid any confusion, use a regexp that is a bit more lax when
matching locales.
Also, quote the regexp, so that the '?' and '$' are not interpreted by
the shell.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udevd needs extra groups for its bundled rules:
Mar 03 12:21:30 buildroot systemd-udevd[732]: Specified group 'render' unknown
Mar 03 12:21:30 buildroot systemd-udevd[732]: Specified group 'kvm' unknown
Add those missing groups.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Julius Kriukas <julius@kriukas.lt>
Cc: Trent Piepho <tpiepho@impinj.com>
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-5732: The DHCP client incorrectly handled certain malformed
responses. A remote attacker could use this issue to cause the DHCP
client to crash, resulting in a denial of service, or possibly execute
arbitrary code. In the default installation, attackers would be isolated
by the dhclient AppArmor profile.
CVE-2018-5733: The DHCP server incorrectly handled reference counting. A
remote attacker could possibly use this issue to cause the DHCP server
to crash, resulting in a denial of service.
Both issues are fixed in version 4.4.1. But we are close to release, so
backport the fixes instead of bumping version.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In particular:
- Explicitly specify the CPU to be used, POWER8, which matches
qemu_ppc64le_pseries_defconfig
- Use hard disk emulation to access the root filesystem instead of an
initrd.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu-system-ppc64le doesn't necessarily exist: it isn't installed by
Qemu, and only created as a symlink to qemu-system-ppc64 by some
distributions (Ubuntu). Other distributions (Fedora) just have
qemu-system-ppc64.
But qemu-system-ppc64 is capable of running little-endian PPC64
systems, so use this one instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The script support/scripts/check-uniq-files uses the argparse Python
module. In most recent Python versions (starting with 2.7), the
argparse module is part of the standard library, and we already check
for the availability of Python in
support/dependencies/dependencies.sh.
However, when running on an ancient distribution with Python 2.6, the
argparse module is not part of the Python standard library, but
available as an external module. Without this module, the build fails,
because check-uniq-files, which is used in target-finalize, fails to
run.
To avoid this failure, this commit adds a check in
support/dependencies/dependencies.sh to verify that the argparse
module is available.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using {} in format strings is only supported in sufficiently recent
Python versions. Python 2.6 doesn't support this, and only format
strings with numbered arguments: {0}, {1}, etc.
Python 2.7:
$ python -c 'print("foo {}".format(12))'
foo 12
$ python -c 'print("foo {0}".format(12))'
foo 12
Python 2.6:
$ python -c 'print("foo {}".format(12))'
Traceback (most recent call last):
File "<string>", line 1, in <module>
ValueError: zero length field name in format
$ python -c 'print("foo {0}".format(12))'
foo 12
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Closes#10831
Commit a952d24b9 (qemu_x86_64: use kernel 4.15) bumped the kernel version
but didn't update the kernel header series to match, causing build failures.
[Peter: reworded]
Signed-off-by: Ciro Santilli <ciro.santilli@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ecore_con added with efl 1.17 is under MIT license (COPYING.NGINX-MIT)
ector added with efl 1.15 is under FTL license (COPYING.FTL)
While at it, add license file hash.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_REPRODUCIBLE is enabled or host uses non UTF-8 capable locale
building systemd fails with an error:
[1/1080] Generating systemd.bg.catalog with a meson_exe.py custom command.
FAILED: catalog/systemd.bg.catalog
/buildroot/output/host/bin/python3 /buildroot/output/host/bin/meson --internal exe /buildroot/output/build/systemd-236/build/meson-private/meson_exe_sed_232a0623cc7ce2cd67ec72ed784b76307102ed76.dat
Warning: You are using 'ANSI_X3.4-1968' which is not a Unicode-compatible locale.
You might see errors if you use UTF-8 strings as filenames, as strings, or as file contents.
Please switch to a UTF-8 locale for your platform.
...
UnicodeDecodeError: 'ascii' codec can't decode byte 0xd0 in position 1079: ordinal not in range(128)
package/pkg-generic.mk:247: recipe for target '/buildroot/output/build/systemd-236/.stamp_built' failed
make: *** [/buildroot/output/build/systemd-236/.stamp_built] Error 1
This patch changes default host system locale from C to C.UTF-8 when
building systemd package to fix this issue. It also introduces
BR2_NEEDS_HOST_C_UTF8_LOCALE flag that checks if this locale is available on
the host system. If locale is not available error message is show and build
process is stopped.
Signed-off-by: Julius Kriukas <julius@kriukas.lt>
[Thomas: use C.UTF-8 instead of en_US.UTF-8.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This release of Epoxy makes "0001-Forward-EGL-cflags-into-epoxy.pc.patch"
unnecessary. Other than bugfixes and a couple of functions added to the
API, this release is backwards-compatible with programs built against
the 1.4.x releases.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit baae5156ce (uboot: use local fdt headers) changed the uboot logic
to pass the host include directories with -idirafter instead of -I, so
include files local to u-boot would be preferred over host includes.
This unfortunately breaks configurations using
BR2_TARGET_UBOOT_NEEDS_OPENSSL on hosts with incompatible openssl headers
installed in the system default include directories as explained here:
http://lists.busybox.net/pipermail/buildroot/2018-March/214651.html
The problem is that -idirafter directories gets added to the very end of the
search order, AFTER the system default directories.
Instead use -isystem which causes the directories to be added after -I but
before the system default directories. With this in place, the include
directories of u-boot will first be scanned, followed by the host includes
and finally the system default include directories.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are spacial RF calibration utilities for TI Wilink 18xx
modules.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-7651: Unauthenticated clients can send a crafted CONNECT
packet which causes large amounts of memory use in the broker. If multiple
clients do this, an out of memory situation can occur and the system may
become unresponsive or the broker will be killed by the operating system.
The fix addresses the problem by limiting the permissible size for CONNECT
packet, and by adding a memory_limit configuration option that allows the
broker to self limit the amount of memory it uses.
The hash of new tarball is not (yet) available through download.php, so use
a locally calculated hash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
systemd-237 slightly changed the README, but the hash was not updated
leading to legal-info failing. Fix it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop IW_MAKE_OPTS, passing the CC, LD, and LDFLAGS in the environment
via TARGET_CONFIGURE_OPTS is enough.
Add license file hash.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes [1]:
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c: In function 'RPI_Create':
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:126:39: error: 'RPI_GLES_DefaultProfileConfig' undeclared (first use in this function); did you mean 'RPI_GLES_DeleteContext'?
device->GL_DefaultProfileConfig = RPI_GLES_DefaultProfileConfig;
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~
RPI_GLES_DeleteContext
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:126:39: note: each undeclared identifier is reported only once for each function it appears in
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c: In function 'RPI_CreateWindow':
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:281:17: error: 'SDL_VideoDevice {aka struct SDL_VideoDevice}' has no member named 'egl_data'; did you mean 'gl_data'?
if (!_this->egl_data) {
^~~~~~~~
gl_data
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:286:10: error: 'SDL_WindowData {aka struct SDL_WindowData}' has no member named 'egl_surface'
wdata->egl_surface = SDL_EGL_CreateSurface(_this, (NativeWindowType) &wdata->dispman_window);
^~
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:286:26: warning: implicit declaration of function 'SDL_EGL_CreateSurface'; did you mean 'SDL_Vulkan_CreateSurface'? [-Wimplicit-function-declaration]
wdata->egl_surface = SDL_EGL_CreateSurface(_this, (NativeWindowType) &wdata->dispman_window);
^~~~~~~~~~~~~~~~~~~~~
SDL_Vulkan_CreateSurface
.../build/sdl2-2.0.7/src/video/raspberry/SDL_rpivideo.c:288:14: error: 'SDL_WindowData {aka struct SDL_WindowData}' has no member named 'egl_surface'
if (wdata->egl_surface == EGL_NO_SURFACE) {
^~
[1] http://autobuild.buildroot.net/results/9612d43b192bbb88214a11fe18f8b8da6ad10313
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tvheadend does not build on microblazeel, because of some assertion
failure in binutils:
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: FDE encoding in [...]/lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a(_divdi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: FDE encoding in [...]/lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a(_udivdi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: FDE encoding in [...]/lib/gcc/microblazeel-buildroot-linux-uclibc/6.4.0/libgcc.a(_umoddi3.o)(.eh_frame) prevents .eh_frame_hdr table being created.
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: BFD (GNU Binutils) 2.29.1 assertion fail elf32-microblaze.c:1494
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: [...]/sysroot/usr/lib/Scrt1.o: probably compiled without -fPIC?
[...]/microblazeel-buildroot-linux-uclibc/bin/ld: final link failed: Bad value
collect2: error: ld returned 1 exit status
Fixes:
http://autobuild.buildroot.org/results/85475885a95f23f3dbc88e5b162108a458233bc4/
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-6767: A stack-based buffer over-read in the ParseRiffHeaderConfig
function of cli/riff.c file of WavPack 5.1.0 allows a remote attacker to
cause a denial-of-service attack or possibly have unspecified other impact
via a maliciously crafted RF64 file.
CVE-2018-7253: The ParseDsdiffHeaderConfig function of the cli/dsdiff.c file
of WavPack 5.1.0 allows a remote attacker to cause a denial-of-service
(heap-based buffer over-read) or possibly overwrite the heap via a
maliciously crafted DSDIFF file.
CVE-2018-7254: The ParseCaffHeaderConfig function of the cli/caff.c file of
WavPack 5.1.0 allows a remote attacker to cause a denial-of-service (global
buffer over-read), or possibly trigger a buffer overflow or incorrect memory
allocation, via a maliciously crafted CAF file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This non ascii character trigger an issue with MakeHeader.py.
./scripts/MakeHeader.py MetersPanel.c
Traceback (most recent call last):
File "./scripts/MakeHeader.py", line 32, in <module>
for line in file.readlines():
File "[...]/output/host/lib/python3.6/encodings/ascii.py", line 26, in decode
return codecs.ascii_decode(input, self.errors)[0]
UnicodeDecodeError: 'ascii' codec can't decode byte 0xe2 in position 956: ordinal not in range(128)
Fixes:
http://autobuild.buildroot.net/results/8ed/8edb78b054a265447fd0e83f67cba5f978be4ed6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The script was changed via modernize utility. The only manual
made part was the handling of StringIO.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The shell expands "$@" as "$1" "$2" "$3"... while it expands $@ as $1 $2
$3. With the second form, we loses spaces in positional parameters.
As example, the following call
pkg-config --cflags "one two" three
is wrapped as
pkgconf --cflags one two three
while we are expecting
pkgconf --cflags "one two" three
"$@" is really useful when writing wrappers. It passes the positional
arguments *as* they are given.
Double quote $@ to prevent from splitting elements.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For some boards, for example the Raspberry Pi, it's necessary to build
in-tree dts files as well as custom/out of tree dts-files (dt-blob.bin).
The existing logic made these two options exclusive, this commit changes
that to allow both in-tree as well as custom sources for dts files.
Signed-off-by: Simon van der Veldt <simon.vanderveldt@gmail.com>
[Arnout: re-wrap help, add extra empty line, change = into +=]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Also removed a patch fixing the build with musl as it made its way into
the 1.6.2 version.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sunxi-mali-mainline-driver builds using parallel compilation by default,
using -j $(nproc), but this could be not wanted.
Pass -j $(PARALLEL_JOBS) to build using jobs configured in buildroot.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the Go programming language to the 1.10 release.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For 4.15 support and various fixes. This version now uses quilt to apply
patches, which is not a required dependency of Buildroot - So add a
POST_PATCH hook to change it to use apply-patches.sh instead.
git shortlog --invert-grep --grep travis --no-merges 42c7c139c14103a83bb2ad7e7a1f0ed491f96500..
Giulio Benetti (7):
Fix bulding driver twice.
Fix 0014-mali-Make-devfreq-optional.patch
Add unapply_patches function in build.sh
Fix 0013-mali-support-building-against-4.15.patch
Add clean option to build.sh
Add parallel building by default and -j option to override jobs number.
Add 0015 parallel build patch to quilt series
Jonathan Liu (2):
Add note about FRONTBUFFER_LOCKING environment variable
Fix Qt capitalization and add link to website
Maxime Ripard (12):
mali: Fix build in 4.15
mali: Make reserved memory optional as it should be
mali: sunxi: Set platform bus type right after device allocation
mali: Make devfreq optional
mali: Actually fix the build
build: Treat patch and make failures as errors
build: Make patch return immediately on error
build: Make sure that we're building a supported release
README: fix the casing of sunXi
README: Talk about triple buffering
build: Switch to quilt
patches: Move version-specific patches to their directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add allwinner mali kernel driver package. Used in combination with
userspace Allwinner openGL libraries, it gives possibility to use 3D openGL
SoC acceleration.
[Peter: Rename to sunxi-mali-mainline-driver. Use revision selection from
sunxi-mali-mainline package. Depend on that package and default to
y if dependencies are met. Tweak Linux config]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add Allwinner Mali openGL userspace driver r6p2.
Used combined with kernelspace Mali driver,
it gives possibility to use 3D openGL SoC acceleration.
It provides fbdev libraries and headers.
It is compatible with Linux >= 4.4 as sunxi-mali-driver-mainline.
[Peter: Move version logic to Config.in, ensure directories exists]
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Reviewed-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Orange-Pi Zero Plus2 board has AP6212 WiFi/BT combo, but does
not have ethernet port. So it makes sense to enable wireless
networking by default:
- add DTS patch enabling AP6212 WiFi/BT combo support
-- this patch is on its way to mainline Linux v4.16
- enable WiFi support in kernel config
- enable Broadcom brcmfmac kernel driver in kernel config
- add Broadcom wireless firmware package to image
- add basic wireless tools to image
- add mdev to image to enable module autoloading
- add rootfs overlay with proper NVRAM file for on-board AP6212 chip
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump versions:
- use U-Boot 2008.01
- use Linux kernel v4.15.2
Drop patch with dts sdcard fix since it has been
merged to Linux v4.15.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Keep the musl workaround patch for now, even though libc-compat.h has
been updated from kernel v4.15. To take advantage of the new
libc-compat.h we need a newer or patched version of musl. The workaround
patch will be removed once musl is updated, and external autobuilders
toolchains are rebuilt.
Cc: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The musl/kernel headers workaround was added in commit 196932cd91
(toolchain: workaround musl/kernel headers conflict) to fix definition
collisions in networking related headers between musl headers and kernel
headers. Kernel headers from version 4.15 and newer do not need this
workaround anymore since kernel commit c0bace798436bc (uapi libc compat:
add fallback for unsupported libcs). The C library does not have to
define the __GLIBC__ macro to make the __UAPI_DEF_* macros effective.
Updated the comment to accordingly.
Tested with the xl2tp package. This package fails to build with older
kernel headers without the workaround (struct in_pktinfo redefinition,
among others). With 4.15 headers, xl2tp builds fine with this patch
applied. That is, no workaround needed.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel version 4.15 (not 4.16 as the musl commit log claims) allows
disabling of more parts of the kernel headers definitions. Add upstream
musl patch that defines the relevant macros. This solves issues of
networking related symbols redefinition in kernel headers that cause
headers conflicts. With that in place a subsequent commit will limit the
musl/kernel headers conflict avoidance workaround in Buildroot to kernel
headers older than 4.15. This workaround has been introduced in commit
196932cd91 (toolchain: workaround musl/kernel headers conflict).
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to disable any systemd parts using either IDN, NSS or gshadow.
IDN is only disabled in C library function call to getnameinfo(),
it does not effect libidn/libidn2 usage in systemd.
Tested with qemu-system-arm.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For this platform, u-boot uses dtoc during the build, which needs Python
libfdt. Set the corresponding option TARGET_UBOOT_NEEDS_PYLIBFDT in the
defconfig.
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Flask-SQLAlchemy is a Flask microframework extension which adds support for
the SQLAlchemy SQL toolkit/ORM.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
SQLAlchemy is the Python SQL toolkit and Object Relational Mapper that
gives application developers the full power and flexibility of SQL.
It provides a full suite of well known enterprise-level persistence
patterns, designed for efficient and high-performing database access,
adapted into a simple and Pythonic domain language.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas: fix check-package warnings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update 0002-Makefile.flags-strip-non-l-arguments-returned-by-pkg.patch
for 1.28.0
- Remove upstream patches 3, 4, and 5.
- Update buxybox.config and busybox-minimal.config
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a major update for libgpiod. The API is not compatible with the
v0.x.y series but since nothing in current buildroot git depends on
this project, I believe we can simply bump the version.
The included tools are compatible with their 0.x.y counterparts.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Reviewed-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Tested-by: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from version 0.28, C++ wrappers are provided as well. The
configure script appropriately detects the availability of a C++
compiler so no Buildroot changes are needed for this.
Building fails with --enable-ipv6 so --disable-ipv6 is needed in
CONF_OPTS. This is known by liblo developers and building without
ipv6 support is recomennded.
Included hash for license files.
Signed-off-by: Alex Baldwin <alexbaldwinmusic@gmail.com>
[Thomas: use single sha256 hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version added support for shared or static library building
through BUILD_STATIC and BUILD_SHARED variables so set them depending
on BR2_xxx_LIBS variables
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also add 0001-Fix-building-against-LibreSSL.patch to fix compiling against
LibreSSL.
This patch has been submitted and accepted upstream.
0ee014d497
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since kernel 4.15 the wandboard rev D1 variants are supported.
Add support for them.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add an option to ncurses to install extra user-configured terminfo
files. By default, only a small number of vital terminfo files are
installed on the target. This allows a build to specify the terminfo
files it needs.
Signed-off-by: Cam Hutchison <camh@xdna.net>
[Thomas: qstrip the variable before using it.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
uClibc-ng removed internal RPC implementation as it
is ipv4 only and can not be used for most important RPC software
rpcbind and nfs-utils.
musl does not implement RPC and GNU C library deprecated the
internal implementation a while ago.
It is still possible to use the C library implementation.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: change to use libtirpc when available, not just when the
toolchain does not have RPC support.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GLIBC_SRC_SUBDIR was needed when Buildroot supported
eglibc which stored all sources in a sub-directory.
It was not removed by the commit removing eglibc support [1].
[1] 500de2598a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting with Glibc 2.27, powf64() is provided by the C library
and colide with the one defined dy libraw.
Rename internal powf64 to libraw_powf64.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With glibc 2.27 memfd_create() is inside a _GNU_SOURCE guard, so call
AC_USE_SYSTEM_EXTENSIONS to get this defined.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: add reference to upstream commit, as suggested by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While we have several defconfigs building internal toolchains with
uClibc, we don't have any building internal toolchain with glibc and
musl. However, having such defconfigs is nice when we bump the C
library version, in order to immediately get feedback on build
failures.
Note that while the ARC internal defconfig uses glibc, it uses the
special ARC glibc version, so it doesn't test version bumps of the
upstream glibc C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This updates x11vnc from 0.9.14 to 0.9.15. The cherry-picked patch is now
part of the release.
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
AT91Bootstrap is a first level bootloader for the Atmel AT91
devices. It integrates algorithms for:
- Device initialization such as clock configuration, PIO settings...
- Device initialization such as clock configuration, PIO
settings...
- Peripheral drivers such as PIO, PMC or SDRAMC...
- Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
- Physical media algorithm such as DataFlash, NandFlash, NOR
Flash...
if BR2_TARGET_AT91BOOTSTRAP
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
