Commit e482ebf51d attempted to fix the
installation of qt5quickcontrols by only installing the PrivateWidgets
directory for the 5.8.0 version.
However, the availability of PrivateWidgets has nothing to do with the
version; in both 5.6.2 and 5.8.0, the installation is gated by the
following statement in src/src.pro:
qtHaveModule(quick):qtHaveModule(widgets): SUBDIRS += widgets
i.e. it is installed when both the Quick and the Widgets module are
available. The Widgets module is controlled by Buildroot's
BR2_PACKAGE_QT5BASE_WIDGETS symbol, the Quick module is controlled by
Buildroot's BR2_PACKAGE_QT5DECLARATIVE_QUICK. The qt5quickcontrols
package selects BR2_PACKAGE_QT5DECLARATIVE_QUICK so it is not really
needed to include it in the condition. However, it is theoretically
possible to build this package without QtQuick. Also, adding this
condition makes it consistent with src.pro.
Note that commit e482ebf51d introduces a
second fix (not mentioned in the commit message): for version 5.6.2, the
Layouts directory is installed, but in 5.8.0 this directory doesn't
exist any more. Therefore, a separate condition on the version is still
needed.
Fixes:
http://autobuild.buildroot.net/results/1ff3e9ad4ba518d0a37f9fc12038bf9020f28094
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a75ab1fc1d ("package/classpath:
Don't depend on jamvm"), we removed the dependency of classpath on
jamvm. Since jamvm is only available for a reduced set of architectures,
classpath could until this commit until be built on those architectures.
However, now that this dependency has been removed, classpath can
potentially be built for all architectures supported by Buildroot, even
though it doesn't support all of them.
Since adding support for additional architectures in classpath doesn't
make much sense, because classpath is in Buildroot only usable with
JamVM anyway, and JamVM is only available for a small set of
architectures, this commit simply makes classpath available on the
architectures that it supports.
By doing so, it also removes the or1k support patch which was added by
commit f12a146f81, since anyway or1k is
not supported by JamVM.
Fixes:
http://autobuild.buildroot.net/results/55eb89f89e96b94a821778bc18ed844af08b7460/
(classpath on microblaze)
http://autobuild.buildroot.net/results/279dd731bd9ecf5f9d54bda3715caeaa7cbcdbb3/
(classpath on nios2)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On PowerPC64(le), we patch all configure scripts. Due to this, the
version.texi in OpenOCD files gets regenerated, and then since it has
a newer date than openocd.info, openocd build system rebuilds the
documentation. Unfortunately, this documentation rebuild fails on old
machines.
We work around this by faking the date of the generated version.texi
file, to make the build system believe the documentation doesn't need
to be regenerated.
Fixes:
http://autobuild.buildroot.net/results/3cbe65a46e75b8e67846d593884c96df97dec7a4
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 68cebedeb9 ("assimp: work around
gcc bug on SuperH"), a work around was added to make the package build
with gcc on SuperH. The condition included a test on the gcc version,
which was mistakenly done on the host gcc version, while a test on the
target gcc version was intended.
Thanks to Peter Korsgaard for spotting the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gcc versions earlier than gcc 6.x fail to build assimp on SuperH when
static linking:
AssxmlExporter.cpp:623:1: error: unable to find a register to spill in class 'GENERAL_REGS'
It's the combination of -Os and *not* having -fPIC that makes gcc
fail, which explains why configurations with dynamic linking work
fine.
-Os -fPIC -> works
-Os -> fails
-O2 -fPIC -> works
-O2 -> works
Therefore, as a workaround, we are forcing the use of -O2 on SuperH
when the gcc version is older than gcc 6.x and we're statically
linking.
Fixes:
http://autobuild.buildroot.net/results/ec88aa8118179e30e24603cc45292047dca19216/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_TOOLCHAIN_EXTERNAL_BLACKFIN_UCLINUX has been removed in commit
311bc137da ("toolchain: kill ADI
Blackfin toolchain"), so this "depends on" is useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libuv library uses __sync atomic built-ins:
$ readelf -a -W output/target/usr/lib/libuv.so.1.0.0 | grep __sync
122: 00000000 0 NOTYPE GLOBAL DEFAULT UND __sync_val_compare_and_swap_4
but this is not currently taken into account in the libuv package,
causing some build failures in packages using libuv as an optional
dependency, such as janus-gateway and mosquitto.
Therefore, this commit updates the libuv package with this additional
dependency. The reverse dependencies of libuv are also updated: luv, luvi
and moarvm.
Fixes:
- http://autobuild.buildroot.net/results/bdaa67d763c0d8d377a04529c74f73bee7d4ccef/
(janus-gateway)
- http://autobuild.buildroot.net/results/2bc84ba2d1167018e2d48e5183ead22b6425dcf5/
(mosquitto)
[Peter: drop cmake changes after cmake revert]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
htop wants to use backtrace() support from the C
library. Unfortunately, with old uClibc versions such as the one we
use for the ARC architecture, the backtrace() implementation is in
libubacktrace. In addition, this implementation needs dladdr()
support, which is in libdl, not available when static linking.
Since this problem no longer exists in more recent versions of uClibc,
we simply special case the ARC+static linking case, and make the
configure script believe that <execinfo.h> is not available.
Fixes:
http://autobuild.buildroot.net/results/cdea351fad7a0f61ddec3e6a141da8da0523a902/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot manual documents that <pkg>_CONF_ENV is passed in the
environment when calling cmake during the configure step. However, the
actual implementation in pkg-cmake passes HOST_<pkg>_CONF_ENV when
configuring the host variant of a cmake package, but does not pass
<pkg>_CONF_ENV when configuring the target variant of a cmake package.
This commit fixes that by passing <pkg>_CONF_ENV in the environment as
expected. It should not cause any behavior change, because this
feature is in fact not used by any package in upstream Buildroot:
$ grep CONF_ENV $(git grep -l cmake-package package/)
package/pkg-cmake.mk:$(2)_CONF_ENV ?=
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
package/pkg-cmake.mk: $$($$(PKG)_CONF_ENV) $$(BR2_CMAKE) $$($$(PKG)_SRCDIR) \
This issue was reported by Olivier <ovalentin@awox.com> as bug #9616.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Remove distribution upgrade cause it slows down the first boot and
presents a bug when executed non interactively.
* Reorganize provision scripts to be in privileged and non privileged
sections
* Add Ubuntu mirror automatic handling for apt packages sources
Fixes bug #9581
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ncurses sub-options BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}
are currently very badly broken: they only control whether the
libform, libmenu and libpanel libraries are installed in
$(TARGET_DIR), but do absolutely nothing about their installation in
$(STAGING_DIR).
This means that when one of those options is disabled, the
corresponding library is indeed not installed in the target, but is
available in staging. It can therefore be detected by the configure
script of another package and used... even though the library will not
be in the target, causing a runtime failure.
Internally, ncurses.mk uses the "make install" logic of ncurses for
the staging installation, but uses a completely hand-written logic for
the target installation, which is the reason for this
desynchronization between what's installed in staging and target.
When BR2_PACKAGE_NCURSES_WCHAR=y, this also causes some build
failures. Indeed, when BR2_PACKAGE_NCURSES_WCHAR=y, Buildroot creates
some symbolic links lib<foo>.so -> lib<foo>w.so in staging and target,
but only for the lib<foo> that have been enabled by
BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL}. Due to this, a package
that for example needed the libmenu library but forgot to select
BR2_PACKAGE_NCURSES_TARGET_MENU was:
- Building fine with BR2_PACKAGE_NCURSES_WCHAR disabled (because
libmenu.so exists in staging), but would fail to run at runtime
because libmenu.so is not in the target.
- Fail to build with BR2_PACKAGE_NCURSES_WCHAR=y because only
libmenuw.so exists, and not the libmenu.so symbolic link.
Since those libraries are small (43K for libform, 21K for libmenu and
8.2K for libpanel), this commit takes the very simple approach of
removing those options, and installing the libraries
unconditionally. It therefore uses the "make install" logic for both
the staging *and* target installation.
In detail, this commit:
- Removes the NCURSES_PROGS variable, not needed since
--without-progs already allows to disable the build and
installation of programs.
- Removes the NCURSES_LIBS-y variable, and replaces it with a single
unconditional assignement to NCURSES_LIBS, only used to create the
lib<foo>w.so -> lib<foo>.so symbolic links when wchar support is
enabled.
- Removes NCURSES_INSTALL_TARGET_CMDS and the functions it was
calling: NCURSES_INSTALL_TARGET_LIBS and
NCURSES_INSTALL_TARGET_PROGS.
- Adds a NCURSES_TARGET_SYMLINK_RESET hook to create the reset ->
tset symbolic link, as was done before.
- Adds a NCURSES_TARGET_CLEANUP_TERMINFO to cleanup the terminfo
files in the target, so that we stay in the same situation in terms
of installed terminfo files.
- Removes the BR2_PACKAGE_NCURSES_TARGET_{FORM,MENU,PANEL} options
from the Config.in files: both their definition and usage.
- Simplifies all the symlink dance for lib<foo> -> lib<foo>w, because
as Yann E. Morin suggested, this dance is only needed in staging, not
in the target. Once binaries have been built, they refer to the
SONAME of the library, which is the lib<foo>w variant (for shared
linking). For static linking and .pc files, it's obvious that we
don't care about them on the target. Therefore the
NCURSES_LINK_LIBS_STATIC, NCURSES_LINK_LIBS_SHARED and
NCURSES_LINK_PC functions no longer take any argument: they always
apply to STAGING_DIR only. NCURSES_LINK_TARGET_LIBS is removed.
It is worth mentioning that adding Config.in.legacy support is *NOT*
necessary. Indeed:
- If they were disabled before this patch, having them in
Config.in.legacy would not trigger the legacy warning.
- If they were enabled before this patch, then the behavior is
unchanged: all libraries are now unconditionally installed. So
there is no point in warning the user.
We double-checked the installed size of a filesystem containing just
ncurses before and after this patch, and the only folder that has its
size changed is /usr/lib, growing from 852 KB to 932 KB in the wchar
enabled case. That's a 80 KB system size increase.
This commit fixes the sngrep build failure and potentially numerous
runtime issues with ncurses.
Fixes:
http://autobuild.buildroot.net/results/7b5db21a6c568e6c6c8fe2b5d5a2f5ca24df510c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there's not much point in generating missing host keys when the
init script is called with "stop", the call to ssh-keygen should not
be done inconditionally, but in the start function instead.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libanl.so is needed for asynchronous network address and service
translation, declared in netdb.h
Signed-off-by: Jesper Bækdahl <jbb@gamblify.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit a5015f1025 ("util-linux: security
bump to version 2.29.2") incorrectly removed <pkg>_AUTORECONF = YES.
While the patches touching configure.ac have indeed been removed, there
is still a patch touching a Makemodule.am file, which triggers an
autoreconf a build time, which itself fails because autoconf/automake
are not available.
So re-add <pkg>_AUTORECONF, with a comment pointing specifically at the
patch that makes it necessary.
Fixes:
http://autobuild.buildroot.net/results/309127a532eed00e406bbaf0b1a51b7241a10505/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently the host build of Python 2 defaults to narrow unicode (UCS2),
ignoring the BR2_PACKAGE_PYTHON_UCS4 configuration option which may be
set to wide (UCS4).
This results in host and target Python packages which are incompatible
in subtle ways.
For example, installing wheels into the target fails when they are made
with the host python, citing incompatibility (as can be seen by the
package tags which may be "cp27u-manylinux1" instead of
"cp27mu-manylinux1").
Compiling the host Python 2 with the same UCS configuration as the
target ensures that the packages are compatible (and the tags match).
This does not affect Python 3 as support for narrow unicode was
deprecated in version 3.3, see https://www.python.org/dev/peps/pep-0393/
Thanks to Tony Breeds <tony@bakeyournoodle.com> for reporting this.
Signed-off-by: Chris Smart <mail@csmart.io>
[Thomas: add comment in the code.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-5847 - The gst_asf_demux_process_ext_content_desc function in
gst/asfdemux/gstasfdemux.c in gst-plugins-ugly in GStreamer allows remote
attackers to cause a denial of service (out-of-bounds heap read) via vectors
involving extended content descriptors.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-5848 - The gst_ps_demux_parse_psm function in
gst/mpegdemux/gstmpegdemux.c in gst-plugins-bad in GStreamer allows
remote attackers to cause a denial of service (invalid memory read and
crash) via vectors involving PSM parsing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It turned out that the troll character U+c2a0 was added by our own
patch.
So fix it amd drop our second patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to btrfs-progs that fixes the build of
docker-engine, and possibly other packages including kerncompat.h from
btrfs-progs.
For the btrfs-progs build itself, a --disable-backtrace option allows to
indicate whether backtrace()/<execinfo.h> support should be used or
not. However, once btrfs-progs is installed, it simply looks at whether
__GLIBC__ is defined or not to decide to use backtrace() or not.
However, uClibc defines __GLIBC__ but does not provide backtrace()
functionality. The additional patch tweaks the kerncompat.h to look at
__UCLIBC__ and not use backtrace() functionality in this case.
Fixes:
http://autobuild.buildroot.net/results/9dc9370a79c5c44e6c92be6a44334842c211d923/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
Makefile:532: *** mbedtls is in the dependency chain of bctoolbox that
has added it to its _DEPENDENCIES variable without selecting it or
depending on it from Config.in. Stop.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Acked-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the comment about the ARC exception to match the one used in VLC,
so that a 'git grep "ARC toolchain issue"' returns the list of packages
to re-evaluate on ARC when the ARC toolchain gets upgraded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because with libimxvpuapi older than 0.10.3, the gst1-imx-0.12.3 "imxvpu"
plugin will not build.
Changelog:
* properly pass on color format in simplified JPEG encoder interface
* add alternative write-callback-style encoding mode
also add encode example variant which uses write-callback style output
* add support for "fake grayscale mode" in encoders
this is done by using I420 internally and filling the U and V planes
with 0x80 bytes
* make sure JPEG quantization table is copied in standardized zig zag order
the VPU does not, so this has to be done explicitely
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-2629 - curl SSL_VERIFYSTATUS ignored
>From the advisory (http://www.openwall.com/lists/oss-security/2017/02/21/6):
Curl and libcurl support "OCSP stapling", also known as the TLS Certificate
Status Request extension (using the `CURLOPT_SSL_VERIFYSTATUS` option). When
telling curl to use this feature, it uses that TLS extension to ask for a
fresh proof of the server's certificate's validity. If the server doesn't
support the extension, or fails to provide said proof, curl is expected to
return an error.
Due to a coding mistake, the code that checks for a test success or failure,
ends up always thinking there's valid proof, even when there is none or if the
server doesn't support the TLS extension in question. Contrary to how it used
to function and contrary to how this feature is documented to work.
This could lead to users not detecting when a server's certificate goes
invalid or otherwise be mislead that the server is in a better shape than it
is in reality.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From https://www.kernel.org/pub/linux/utils/util-linux/v2.29/v2.29.2-ReleaseNotes
This release fixes su(1) security issue CVE-2017-2616:
It is possible for any local user to send SIGKILL to other processes with root
privileges. To exploit this, the user must be able to perform su with a
successful login. SIGKILL can only be sent to processes which were executed
after the su process. It is not possible to send SIGKILL to processes which
were already running.
Drop upstream patches and autoreconf since it's no longer required.
[Peter: extend commit message with CVE info / description]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit limits results from the javascript query for selecting
messages from the mailing list. It was not limited before.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes#9666 [1]
cp -dpfr .../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets .../target/usr/qml/QtQuick
cp: cannot stat ‘.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/qml/QtQuick/PrivateWidgets’: No such file or directory
[1] https://bugs.busybox.net/show_bug.cgi?id=9666
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 76838f6341.
The commit referenced above explicitly states that the function was
copied as-is from the gcc source code at the time. And indeed that is
exactly how the function appeared in gcc in commit
e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934.
However, our toolchain wrapper is "GPLv2 only", while the file this function
was copied from is "GPLv3 or later". As such we can't include that function
and still comply to both licenses.
Furthermore, the code is far from optimum.
Since this feature is not release-critical, revert it until we re-implement
it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérôme Pouiller <jezz@sysmic.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently we force selection on mbedtls for bctoolbox. If, for whatever
reason, mbedTLS is not found, bctoolbox searches for PolarSSL and, if
not present, fails with:
```
Could NOT find PolarSSL (missing: POLARSSL_INCLUDE_DIRS
HAVE_POLARSSL_SSL_H)
```
This happens because bctoolbox enables support for mbedTLS and PolarSSL
by default, whereas, if both are enabled, mbedTLS is preferred over
PolarSSL.
However, crypto support is not mandatory and support for both libraries
can be turned off. Therefore, optionally depend on mbedTLS or PolarSSL
and enable/disable the library support explicitly.
This fixes the issue of searching for PolarSSL altough the dependency is
not declared in the bctoolbox package.
Note, that this does not fix the issue why mbedtls is not found although
it is enabled. This issue is address in this thread [1].
Fixes:
http://autobuild.buildroot.net/results/cfe/cfeb2f542598e5d450b332fb51a6d79bae24158c/
.. and more.
[1] http://lists.busybox.net/pipermail/buildroot/2017-February/183055.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5c4d3560b9.
Although the patch fixes the build error it does not set the flags for
Libs.private properly. A follow-up patch will provide a better solution
for this issue.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make license type lists more uniform:
* put content license applies to in parenthesis; ex: "GPLv2+ (programs)"
* use commas to separate types listed without conjuction; ex: "GPLv2, LGPLv2"
No attempt was made to validate the claimed licenses. This is just a tweak
to increase uniformity of the _LICENSE variables.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: replace semi-colons by commas in LIBURCU_LICENSE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select (and use) builroot provided freetype in case qt5base gui is
selected (gui without freetype/font support makes not much sense
and gives compile errors).
Qt 5.6 needs some support to find the include headers, 5.8 is
clever enough inherently.
Fixes [1] (by avoiding the build-in freetype library which depends
on activated libpng support):
Project ERROR: Library 'libpng' is not defined.
make[3]: *** [sub-3rdparty-freetype-make_first] Error 3
[1] http://autobuild.buildroot.net/results/219162ba616289f799a5053c4dcc6b8574284283
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch 0006-fix-client-gfx_state-initialisation.patch
add the initialisation for the variable gfx-state.
This patch was provided by the community and it is already
integrated in OpenEmbedded.
Signed-off-by: Philippe Reynes <philippe.reynes@sagemcom.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
http://autobuild.buildroot.net/results/197/197ab8a12bf1d780a986e5d447d1e0f5ee070405/
qt5.8 no longer supports ARMv4. From src/corelib/global/qprocessordetection.h:
if Q_PROCESSOR_ARM >= 6
define Q_PROCESSOR_ARM_V6
endif
if Q_PROCESSOR_ARM >= 5
define Q_PROCESSOR_ARM_V5
else
error "ARM architecture too old"
[Peter: also hide comment as pointed out by Baruch]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Explicitly set the ERL_TOP environment variable to override values set
on a user's system. This prevents Erlang's configure scripts from
using source files outside of the ones that Buildroot downloaded.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The initial fix for this issue, re-including stdbool.h, is not
working.
Instead, fix using the method used for other packages with a similar
problem: add -std=gnu99, which prevents bool from being redefined and
removes the need for any source code change.
Fixes: 64904f0f6d
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julian only ever sent one patch to freerdp, the one adding it, in 2012.
I'm somewhat interested in this package, so I'll adopt it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gstreamer has moved to build time unaligned access support detection using
ifdefs in gstconfig.h since 1.9.2:
commit 6ef601367e0f5adb7a8b02cec94dec04fccf701a
Author: Nirbheek Chauhan <nirbheek@centricular.com>
Date: Tue Jun 21 18:59:49 2016 +0530
gstconfig.h: Detect unaligned access support at compile-time
This makes gstconfig.h completely arch-independent. Should cover all
compilers that gstreamer is known to build on, and all architectures
that I could find information on. People are encouraged to file bugs if
their platform/arch is missing.
So ac_cv_unaligned_access is no longer used and our logic can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From http://www.openwall.com/lists/oss-security/2017/02/16/4
The latest dbus release 1.10.16 fixes two symlink attacks in
non-production-suitable configurations. I am treating these as bugs
rather than practical vulnerabilities, and very much hope neither of
these is going to affect any real users, but I'm reporting them to
oss-security in case there's an attack vector that I've missed.
No CVEs assigned so far.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to glibc 2.18, definitions like SIZE_MAX or INT_FAST32_MAX from
<stdint.h> were only made available for C code, or in C++ if
__STDC_LIMIT_MACROS was defined.
The code from jasper uses such definitions, without defining
__STDC_LIMIT_MACROS. Unfortunately, defining __STDC_LIMIT_MACROS in
the jasper headers doesn't work, since <stdint.h> has already been
included before, at a point where __STDC_LIMIT_MACROS was not defined.
So to solve this problem, we simply pass -D__STDC_LIMIT_MACROS in
CXXFLAGS when building libraw with jasper support.
Fixes:
http://autobuild.buildroot.net/results/908aef6c82d56060933713df217b6b2ba21a01b0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The generic code now knows how to extract .tar.lz archives. Remove the local
extract code.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit teaches the generic package handling code how to extract .tar.lz
archives. When lzip is not installed on the host, host-lzip gets built
automatically.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Don't special case $(XZCAT) when constructing DL_TOOLS_DEPENDENCIES. The next
commit will introduce another extractor that automatically builds when not
installed. Introduce EXTRACTOR_DEPENDENCY_PRECHECKED_EXTENSIONS that lists
archive extensions for which the extractor is already checked in
support/dependencies/check-host-foo.mk. Use this in the newly introduced
extractor-dependency to populate DL_TOOLS_DEPENDENCIES.
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[Thomas: add missing space after "firstword", as noticed by Thomas DS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MPD version 0.20 being affected by GCC PR libstdc++/64735 means no mpd package
available in Buildroot for the architectures NIOSII, ARMv4, ARMv5 and SPARCv8
until GCC 7 is released.
As the next Buildroot release is in 2017.02, which is before GCC 7 is expected
to be finished we add hidden config symbols to select the version branch to use.
Note, that we bumped the version from 0.19 to 0.20 quite recently within the
current Buildroot release cycle. This way we can keep the support for mpd on
the affected architectures, like ARMv5, until GCC 7 is out.
Note, that for the version 0.19 MPD requires libglib2.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Release 0.1.2 claimed to fix an issue with requesting both types of
line events, but actually didn't. This time it's really fixed.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cups configure script checks for a pkg-config program. If host-pkgconf
has not been built prior to cups, it uses the system pkg-config, which
might potentially lead to bogus results:
checking for i586-buildroot-linux-musl-pkg-config... no
checking for pkg-config... /usr/bin/pkg-config
With this patch applied:
checking for i586-buildroot-linux-musl-pkg-config... no
checking for pkg-config... /home/thomas/projets/buildroot/output/host/usr/bin/pkg-config
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cbootimage uses non-standard u_intXX_t types instead of the C99 types
uintXX_t types, which prevents it from building with the musl C library.
A patch to fix this has been submitted upstream, but since there are
many many occurences of such types, the patch is a bit large to carry in
Buildroot, especially compared to the fact that having this package
building against musl is probably not a top priority.
So for now, simply disable this package on musl, until upstream fixes
the issue and releases a new version.
Fixes:
http://autobuild.buildroot.net/results/61bdfb7e0ff9628190d9eb86e40c4c90e768b8e2
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When GCC_COLORS is set, ccache passes '-fdiagnostics-color' to GCC but
this flag requires GCC v4.9 or later. Older versions complain about the
unrecognized command line option.
Using GCC_COLORS in the context of Buildroot is seldom useful, so we
just unexport GCC_COLORS altogether.
Reported-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Jann Horn, Project Zero (Google) discovered that ntfs-3g, a read-write
NTFS driver for FUSE does not not scrub the environment before
executing modprobe to load the fuse module. This influence the behavior
of modprobe (MODPROBE_OPTIONS environment variable, --config and
--dirname options) potentially allowing for local root privilege
escalation if ntfs-3g is installed setuid.
Notice that Buildroot does NOT install netfs-3g setuid root, but custom
permission tables might be used, causing it to vulnerable to the above.
ntfs-3g does not seem to have a publicly available version control system
and no new releases have been made, so instead grab the patch from Debian.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
- CVE-2016-1248: vim before patch 8.0.0056 does not properly validate values
for the 'filetype', 'syntax' and 'keymap' options, which may result in the
execution of arbitrary code if a file with a specially crafted modeline is
opened.
- CVE-2017-5953: vim before patch 8.0.0322 does not properly validate values
for tree length when handling a spell file, which may result in an integer
overflow at a memory allocation site and a resultant buffer overflow.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to the patches we have on wget 1.19, we need to
autoreconf. Unfortunately, when the autoreconfiguration process occurs
with host-gettext already built and installed, the build of wget fails
with a fairly weird error:
In file included from str-two-way.h:44:0,
from c-strcasestr.c:37:
./stdint.h:89:5: error: #if with no expression
#if
As explained in http://git.net/ml/bug-gnulib-gnu/2017-01/msg00067.html
and the links pointed by this page, this is due to an incompatibility
between the newer version of gnulib used in wget, and an older .m4 file
in gettext.
In the context of Buildroot, the easiest way to avoid the issue is to
not autoreconf wget. The wget project has conveniently released a 1.19.1
release, which contains our two patches, plus just one small feature
addition. It is therefore reasonable to apply this as a solution to this
build issue.
Fixes:
http://autobuild.buildroot.net/results/b62ac6fd5ce36453935c309e112262467cf0e3bf/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use comm(1) to check that all our config options are properly set in the
resulting configuration, rather than our canned and fragile code.
Reported-by: Cam Hutchison <camh@xdna.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update patch 0001-Adjust-for-buildroot-build.patch to
use real static linking (command line flag '-static' for
target gpio-static).
Fixes [1]:
[Link]
.../output/host/usr/lib/gcc/powerpc-buildroot-linux-uclibc/5.4.0/libgcc.a(unwind-dw2-fde-dip.o): In function `_Unwind_Find_FDE':
...output/build/host-gcc-final-5.4.0/build/powerpc-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde-dip.c:465: undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
make[1]: *** [gpio-static] Error 1
make[1]: Leaving directory `.../output/build/wiringpi-2.32/gpio'
[1] http://autobuild.buildroot.net/results/b905617dda0e120d04c54daf7cae2bad236ac767
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The motion autotools script helpfully detects the host
Microprocessors intr set and optimizes for it.
Disabling this feature causes autotools to use the
target parameters passed by BR instead.
Signed-off-by: Ray Kinsella <ray.kinsella@intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script helps in testing that a package builds fine on a wide range
of architectures and toolchains: BE/LE, 32/64-bit, musl/glibc/uclibc...
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr:
- completely rewrite the script from Thomas, with help from Luca
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As now the Qt version is configurable to simplify the menu display
logic we remove the menu comment about deprecated modules and
indicate it in the relevant modules' help text instead, and also
mention in the help text if a package's tech preview status has been
changed between Qt 5.6 and Qt 5.8
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rework done on commit
accba02a47 ("toolchain: add option for
toolchains affected by GCC PR libstdc++/64735") by me was wrong. The
BR2_TOOLCHAIN_HAS_GCC_BUG_64735 option should be enabled when the bug is
present in the toolchain, not the opposite.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit f29bb169cf (libevent: fix openssl detection when statically linking)
forced libevent to link against zlib when statically linking against openssl
as the configure script failed to do this.
Since then libevent has been bumped, and it now uses pkg-config to figure
out how to link with openssl, so ensure pkg-config is available and drop the
now-unneeded workaround.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1e7/1e7027b1b87d88b4517b1b19d3a2ae54c24f2c10/http://autobuild.buildroot.net/results/ff7/ff7e010b41e7448d15d20396e9e9bd7319dd493b/http://autobuild.buildroot.net/results/269/269a3a76f61c65423ba703a85e94cc003fb75e4c/
Libevent/libtool gets confused by the library order when statically linking
the sample programs and passes -lz before -lcrypto even though libcrypto
uses zlib.
/bin/bash ./libtool --tag=CC --mode=link .. -o sample/https-client \
sample/https-client.o sample/hostcheck.o \
sample/openssl_hostname_validation.o libevent.la \
libevent_openssl.la -lssl -lcrypto -lz -lz -lcrypto
libtool: link: .. -o sample/https-client sample/https-client.o \
sample/hostcheck.o sample/openssl_hostname_validation.o \
./.libs/libevent.a ./.libs/libevent_openssl.a \
-lssl -lz -lcrypto
../libcrypto.a(c_zlib.o): In function `zlib_stateful_expand_block':
c_zlib.c:(.text+0x30): undefined reference to `inflate'
This is most likely fixable, but as the sample programs aren't installed /
used, simply skip building them to save time and work around this issue.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2017-5357: crash with some malformed commands.
Upstream now provides .tar.lz archive. Add the necessary extract command.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ftp.netroedge.com is (also) down. Download the package from the Debian
snapshot archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable fakedate for whole build process.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
`date' is widely used by packages to include build information in their
binaries. Unfortunately, this is incompatible with BR2_REPRODUCIBLE.
Instead of having to identify all `date' invocations in the different
packages, this commit adds a small tool that allows to always return
the same date.
This work was sponsored by `BA Robotic Systems'.
[Peter: drop debugging print]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The use of the __DATE__ and __TIME__ macros are one of the most common
sources of non-reproducible binaries. In order to fix that, gcc 7 supports
the SOURCE_DATE_EPOCH variable:
https://gcc.gnu.org/git/?p=gcc.git;a=commitdiff;h=e3e8c48c4a494d9da741c1c8ea6c4c0b7c4ff934
This patch take advantage of toolchain-wrapper to provide support of
SOURCE_DATE_EPOCH to older gcc versions.
Function get_source_date_epoch() come directly from gcc git.
This work was sponsored by `BA Robotic Systems'.
[Peter: use sizeof for character array sizes, make function static,
extend commit message, add upstream gcc commit]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When pyqt is used it's obvious that qt needs to be selected and
configured by the user, hence we enforce it by making pyqt depending on
qt, rather than selecting it and depending only on the qt requirements.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When pyqt5 is used it's obvious that qt5 needs to be selected and
configured by the user, hence we enforce it by making pyqt5 depending on
qt5, rather than selecting it and depending only on the qt5
requirements.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Restrict target install to quickcontrols(1) qmls only.
Installing everything under qml/QtQuick includes e.g. quickcontrols2 if
existent in staging (but not selected). Another issue may arise e.g. for a
external package that creates more files than it installs itself under
qml/QtQuick. In that case, it would depend on the order of the packages how
much gets installed into target.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For 5.8.0
- add hashes
- qt5 need C++11 compliant compiler since 5.7 ([1])
- use different licenses: since version 5.7 Qt removed the LGPL v2.1 option in favor
of v3 with a different exception
- qt5base: renamed library to EglFSDeviceIntegration ([2])
- qt5base: remove ras-pi patch, commit c0cc5052097c723d0331a7619d686af9eb93d33c fix it ([3])
- qt5base: remove 0007-eglfs-fix-eglfs_mali-compile-for-odroid-mali.patch (upstream committed [3b])
- qt5base: remove obsolete config-option -large ([4])
- qt5base: gstreamer support fully moved to qt5multimedia, so gstreamer
related options are no longer passed ([5])
- add patch for python-pyqt5 to fix the build with Qt 5.8
- add tweak in libv4l to fix the build with Qt 5.8, originally provided
by Peter Seiderer
- add patch from Peter Seiderer fixing a build issue with freetype
For 5.6.2
- moved patches to subdir, and renumber patches
[1] http://blog.qt.io/blog/2016/06/16/qt-5-7-released/
[2] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=ec4eb4db61094179bc6a9ec26ec68fb710177053
[3] https://codereview.qt-project.org/#/c/167172/
[3b] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=f1b4bd4790860e1ff5afcec111a359bc3a91cfda
[4] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=84d3a21c9efe7efb2cce6d3bd14af1f9580b1108
[5] https://code.qt.io/cgit/qt/qtbase.git/commit/?id=7d4da559afb62a779b3d90a65fb679cb5433f203
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Julien Corjon <corjon.j@ecagroup.com>
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
[Thomas:
- tweak commit log about GStreamer related changes, suggested by Arnout
- move the gcc 4.8 dependency from the main qt5 option to just the
qt5.8 selection, so that qt5.6 can still be built if gcc < 4.8 is
used. Noticed by Arnout.
- rename the options of the version selection to not include the
version number itself so that we don't have to keep legacy
symbols. Noticed by Arnout.
- introduce changes to qt5quickcontrols2.mk needed to handle qt5.6
vs. qt5.8, borrowed from a later patch in the series.
- add patch for python-pyqt5 to fix the build with Qt 5.8.
- add fix to libv4l.mk from Peter Seiderer to fix the build with Qt
5.8.
- renumber patches for 5.6.2, suggested by Arnout.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Selinux is currently disabled staticly in logrotate. This patch fixes
this by checking for libselinux and adding it as a dependecy if it has
been selected.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed both patches as they have been added to this release.
Aslo removed reference to github patch in makefile as it has been
added to this release as well.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version of ntp fixes several vulnerabilities.
CVE-2016-9311
CVE-2016-9310
CVE-2016-7427
CVE-2016-7428
CVE-2016-9312
CVE-2016-7431
CVE-2016-7434
CVE-2016-7429
CVE-2016-7426
CVE-2016-7433
http://www.kb.cert.org/vuls/id/633847
In addition, libssl_compat.h is now included in many files, which
references openssl/evp.h, openssl/dsa.h, and openssl/rsa.h.
Even if a you pass --disable-ssl as a configuration option, these
files are now required.
As such, I have also added openssl as a dependency, and it is now
automatically selected when you select ntp.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We currently have two places where we recommend where BR2_DL_DIR
should be set: "Environment variables" and "Location of downloaded
packages". The former recommends setting BR2_DL_DIR in the .config,
the latter kind of endorses using ~/.bashrc.
We prefer suggesting the ~/.bashrc way since it avoids downloading the
same file multiple times, and anyway it's wise to have all the details
in a unique place. So remove the .config suggestion from "Environment
variables" and let it just point to "Location of downloaded packages".
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual mentions LIBFOO_GIT_SUBMODULES but does not tell what value
it should have. The implementation only checks whether the variable is
non-empty, but we should suggest a specific value to avoid people
wondering what they have to set, and to try setting weird values.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Ricardo Herrero <ricardo.herrero@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When this qemu nios2 defconfig has been added, the insternal toolchain
used for testing was build with Linux kernel headers 4.9, so
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_9 was missing in the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On uClibc, finite, isinf and isnan are not directly implemented as
functions. Instead math.h #define's these to __finite, __isinf and __isnan,
which are real functions.
This confuses the Ruby configure script which use AC_REPLACE_FUNCS to
detect these, as it really checks for a function without including math.h.
Because of the naming difference the checks fail, therefore the symbols
HAVE_FINITE, HAVE_ISINF and HAVE_ISNAN are not defined.
Ruby code relies on those symbols in order to define its own version of
the finite, isinf and isnan functions. Since the symbols haven't been
defined, those definitions cause conflicts with the already-existing
functions.
Fixes:
http://autobuild.buildroot.net/results/f34/f34dc20749c6f6d12c51eddf3ee6c2ef41d7c13d/
[Peter: extend description, add comment in .mk]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcec is a cmake based package. LIBCEC_AUTORECONF is meaningless in
this context.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
binutils-2.27 gas has bug that results in the following kind of build
error when assembling bb[cs]i.l on big-endian xtensa targets:
ieee754-sf.S:237: Error: invalid symbolic operand
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enabling TLS compression may make mbedTLS vulnerable to the
CRIME attack [1]. It should not be enabled unless is is sure CRIME and
similar attacks are not applicable to the particulare situation.
As zlib is probably enabled in most systems, the user might end up with
a vulnerable system without knowing. So, instead of enabling compression
support if the zlib package is available, we make the compression support
a config option. This way, the user has to explicitly enable compression
support and is warned by the help text about the risk.
[1] https://tls.mbed.org/kb/how-to/deflate-compression-in-ssl-tls
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version introduces a lot of bug fixes and some new API
functions.
Additionally, the IIO Daemon is now able to share the local IIO devices
through USB (using FunctionFS).
[Peter: usbd option needs 3.18+ headers, reorder options for menuconfig]
Signed-off-by: Paul Cercueil <paul.cercueil@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Automatically build sudo with ldap support when openldap is enabled.
When sudo is built with ldap, /etc/sudoers is only read in for defaults,
all rules need to be provided via ldap which is configured by the user
in /etc/ldap.conf.
Signed-off-by: Chris Frederick <cdf123@cdf123.net>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds inode tracking to the size-stats script so that hard
links don't cause files to be double counted. This has a significant
effect on the size computation for some packages. For example, git has
around a dozen hard links to a large file. Before this change, git would
weigh in at about 170 MB with the total filesystem size reported as
175 MB. The actual rootfs.ext2 size was around 16 MB. With the change,
the git package registers at 10.5 MB with a total filesystem size of
15.8 MB.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also making it clearer as for what each plugin dependencies are.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: invert conditions to avoid empty ifeq ... else statements.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_OPENNTPD has a "depends on !BR2_PACKAGE_NTP" because the
openntpd package conflicts with the ntp package.
So the Config.in comment of openntpd should also not be visible when ntp
is selected. Otherwise the comment will show up when the user has a
non-NPTL toolchain, and once he enables NPTL support, the comment
disappears, but the package option doesn't appear.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow automatic network configuration via systemd-networkd if selected.
If systemd-networkd is enabled and $BR2_SYSTEM_DHCP is set, then create
a .network file to configure the selected network interface via DHCP.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- merge the two patches from Eric into just one
- instead of generating the dhcp.network file completely from the .mk
file, use a template file, and "sed" it with the right network
interface]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although highly recommended to be enabled, EFL's eeze can be disabled
and thus no dependency on libudev or dynamic device management.
Since 'BR2_PACKAGE_HAS_UDEV' has two ways to be satisfied (eudev or
systemd) we can't automatically select it, instead show a comment and
use 'depends on'.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
[Romain:
- Propagate the eeze dependency to enlightenment and efl Wayland
- Remove udev provider from eeze comment in efl's Config.in
- Add comments when eeze is not available]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To reduce the qt5base binary size, we can disable unnecessary features.
Instead of trying to map every qt5base option to buildroot, create a
single config that we can pass any option too. Then append those to the
ones generated by buildroot.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Originally, the opkg sources also contained the tools needed to _create_ an
opkg package. In later releases, this code has been split to a separate
package opkg-utils.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this kernel rev has numerous bug fixes, framework upgrades and new
features added.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this version bump allows usage of hardkernel's secure signatures when
booting a system
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To enable compression support using zlib it is necessary to uncomment
the define for MBEDTLS_ZLIB_SUPPORT in config.h [1].
Note, that enabling TLS compression may make mbedTLS vulnerable to the
CRIME attack [1]. It should not be enabled unless is is sure CRIME and
similar attacks are not applicable to the particulare situation.
As zlib is probably enabled in most systems, maybe it is best to make
the compression support a user choice and add the warning from [1]?
[1] https://tls.mbed.org/kb/how-to/deflate-compression-in-ssl-tls
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of a 'rule' variable that can contain 'show-depends' or
'show-rdepends' is not logical if get_depends is considered as a reusable
function from various scripts. The name of these rules are too much an
implementation detail.
Therefore, split the existing get_depends into two separate functions
get_depends and get_rdepends, while keeping code duplication to a minimum.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Functions to obtain the version and dependencies of a package from Python
can be useful for several scripts. Extract this logic out of graph-depends
into pkgutil.py.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove shebang from pkgutil.py, noticed by Yann E. Morin.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Gunicorn ‘Green Unicorn’ is a Python WSGI HTTP Server for UNIX. It’s a
pre-fork worker model ported from Ruby’s Unicorn project. The Gunicorn
server is broadly compatible with various web frameworks, simply
implemented, light on server resource usage, and fairly speedy.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google deprecated feed api to cenvert rss to json, switching
to yahoo yql. This patch also reorganize the javascript code
to accomodate the fixings.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove 0001-Include-stdint.h-where-needed.patch as it was merged into
the tree.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Function get_depends was recently changed to support both normal
dependencies as reverse dependencies, via a global variable 'rule' that
equals 'show-depends' or 'show-rdepends'.
As a subsequent function will extract this function get_depends to a
separate file, the use of globals is problematic.
Instead, pass the global as an argument.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sync external prebuilt toolchain with the one we now build in Buildroot,
i.e. arc-2016.09. Since that prebuilt toolchain finally has IPv6 enabled
it works pretty fine for building packages in Buildroot.
Still note:
1) There might be subtle differences between uClibc configuration
compared to Buildroot's one.
2) A couple of patches we apply on top of Builroot-built toolchain
are obviously missing in the prebuilt version - they will be
available in the next release.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Vlad Zakharov <vzakhar@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I also modified the Disable-building-test-programs.patch to work
with the newer Makefile.
[Peter: add s-o-b / note to patch]
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This updates Linux kernel for Synopsys ARC HS38 VDK so it matches real
platform and while at it bump kernel version to the latest.
Main changes:
* Linux kernel v4.9.6 (latest in 4.9.x series in buildroot)
* Add support of MMC controller which is used for rootfs
* Add support of UIO which is used to communicate with EVSS
Now with this update image built by vanilla Buildroot VDK has
working UART, MMC, LCD, Ethernet, UIO etc.
And while at it we rename defconfing so it:
1) Doesn't mention SMP any more - that's the only option anyways now
2) Matches common naming scheme: vendor_arch_platform
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Zakharov Vlad <Vladislav.Zakharov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
getgetopt generates code that causes compilation warnings in current
versions of gcc. If gengetopt is used for programs that set -Werror during
compilation, these compilation warnings become real problems.
Unfortunately, the gengetopt project seems dead for several years now. Last
release dates back to 2012. There is an open bug for this problem [1], with
a proposed patch, but no response from the maintainers.
Apply the patch from the bug report to fix the problem.
[1] http://savannah.gnu.org/bugs/?40243
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump squashfs with one commit to fix a compilation error on the ancient RHEL
5 distribution.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a small bug-fix release:
- include <poll.h> instead of <sys/poll.h> in gpioset
- fix a formatting issue in gpioinfo for chips with >100 GPIO lines
- fix a bug when requesting both-edges event notifications
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc-ng from 1.0.22 and up supports aarch64 architecture.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The config for ISA choice is removed for a long time as
the buildsystem does not pass -march=mips* to the compiler anymore.
For mips{32,64}r6 support NAN selection is required.
Tested with qemu mips32/mips64 defconfigs.
A small patch is required. Bug found while testing qemu defconfigs.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fixes mips{32,64}r6 support
- adds experimental aarch64 support
- fixes syscalls with 6 arguments for x86
- removes PID caching and simplifies architecture specific code
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Updated the zmq version detection patch to apply cleanly on 16.0.2.
Added patch #2 to replace compile_and_run with compile_and_forget in the setup
code: this function is only used to check for the availability of "sys/un.h" and
we only need to compile the test code to make sure of that. This fixes the
cross-compilation.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot has a mechanism to detect a too-old or missing tar program on the
host machine, and builds a custom host-tar if needed. An example situation
is a RHEL5 host machine, where tar is knowingly too old.
The apply-patches script also employs tar, in case the patches come as an
archive. However, tar is called as 'tar' without any absolute path, and the
environment does not point in any way to the possibly custom tar. As a
result, the too-old-tar is called. A particular problem is the flag '-a'
which is missing on e.g. RHEL5.
Previously, this problem went unnoticed: tar would fail, but apply-patches
did not notice it, and the overall return code of the script was 'success'.
However, commit d5ae67b4 added 'set -e' to the script, causing any error to
halt execution of the script with an error.
Fix the problem by adding the Buildroot-built host tools to the PATH when
calling apply-patches.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The originally added entries were based on 'last committer' heuristics, but
I do not particularly feel responsible for them.
Instead update the list with more appropriate entries.
Additionally, update my email address.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit updates the sponsors page on our web site to indicate that
Google and Mind are sponsoring the Buildroot Developers Meeting at
FOSDEM 2017 in Brussels.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kernel 4.9.7 has an important fix: a2104c7cd3b24c432 ("drm/atomic:
clear out fence when duplicating state"), which fixes a kernel
warning that triggers sometimes when starting/stopping ksmcube
application several times in a row.
So bump to this version.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also bump the pc samples since they're tied to the (base) qemu config.
Results table:
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.9.6 2.6.0 YES OK (3)
arm_versatile 4.9.6 2.5.0 YES OK
arm_versatile_nommu 4.4.45 2.5.0 YES OK
arm_vexpress 4.9.6 2.5.0 YES OK
m68k_mcf5208 4.8.17 2.5.0 YES OK (6)
m68k_q800 4.9.6 q800-v2.4.0 NO (2) OK
microblazebe 4.9.6 2.5.0 YES OK
microblazeel 4.9.6 2.5.0 YES OK
mips32r2el_malta 4.9.6 2.5.0 YES OK
mips32r2_malta 4.9.6 2.5.0 YES OK
mips32r6el_malta 4.9.6 2.6.0 YES OK (3)
mips32r6_malta 4.9.6 2.6.0 YES OK (3)
mips64el_malta 4.9.6 2.5.0 YES OK
mips64_malta 4.8.17 2.5.0 YES OK (6)
mips64r6el_malta 4.9.6 2.7.0 YES OK (3)(4)
mips64r6_malta 4.9.6 2.7.0 YES OK (3)(4)
nios2-10m50 4.9.6 2.9.0 NO OK
or1k 4.9.6 2.5.0 NO OK
ppc_g3beige 4.9.6 2.5.0 YES OK
ppc_mpc8544ds 4.9.6 2.5.0 YES OK
ppc_virtex_ml507 4.9.6 2.5.0 NO OK
ppc64_pseries 4.9.6 2.5.0 YES OK
sh4 4.9.6 2.5.0 YES OK
sh4eb 4.9.6 2.5.0 NO (1) OK
sparc_ss10 4.9.6 2.5.0 YES OK
sparc64_sun4u 4.9.6 2.5.0 YES OK
sparc_sun4u 4.9.6 2.5.0 YES OK
x86 4.9.6 2.5.0 YES OK
x86_64 4.9.6 2.5.0 YES OK
xtensa_lx60 4.8.17 2.6.0 YES OK (6)
xtensa_lx60_nommu 4.8.17 2.6.0 YES OK (5)
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Known to fail with qemu versions lower than 2.6.0
(4) - Might work with 2.6.0, but the cpu definition changed in 2.7.0
(5) - Kept back on 4.8.x series since 4.9.x fails to build
(6) - Kept back on 4.8.x series since 4.9.x fails to boot
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add imx6q-sabresd_defconfig which supports imx6q-sabresd board using
mainline U-Boot and mainline kernel.
Keep freescale_imx6qsabresd_defconfig for those who want to run U-Boot and
kernel versions from NXP.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes:
* Buildroot defconfig
* Mainline Linux kernel v4.9.6
* Mainline U-Boot (current HEAD revision is used, as board support
patches are not in stable release yet)
* genimage config to create sdcard image
* Board readme.txt
[Peter: use http:// instead of git:// for u-boot]
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch download URL to match the website and avoid issues.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minimalistic C client for Redis >= 1.2
It is minimalistic because it just adds minimal support for
the protocol, but at the same time it uses a high level
printf-alike API in order to make it much higher level than
otherwise suggested by its minimal code base and the lack of
explicit bindings for every Redis command.
https://github.com/redis/hiredis
[Peter: use install -t / -D, fix arguments]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install also lxc in staging directory, this will be needed for the
incoming integration of lxd package. Moreover, other packages could
find useful to integrate with liblxc instead of using lxc-xxx binaries.
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lxc can use gnutls for various checksumming so add a dependency on it if
package is selected
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: git is a runtime dependency, use pkg-config for openssl
dependencies, use make install]
Signed-off-by: Francesco Negri <francesconegri@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
* Mitigate DoS attacks that use client-initiated SSL/TLS renegotiation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needed when wayland support is enabled in xserver_xorg-server.
This patch fixes the final build error:
Making all in xwayland
make[3]: Entering directory '/home/buildroot/br5/output/build/xserver_xorg-server-1.19.0/hw/xwayland'
make[3]: *** No rule to make target '/usr/share/wayland-protocols/unstable/relative-pointer/relative-pointer-unstable-v1.xml', needed by 'relative-pointer-unstable-v1-client-protocol.h'. Stop.
when trying to build
http://autobuild.buildroot.net/results/cf0/cf026e9b18e86b9890341612050f4d166a7b822d/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perl-gd now supplies a Build.PL, but this one is not cross-compilation
friendly. So, we still use Makefile.PL like in previous version by using
the new <pkg>_PREFER_INSTALLER variable.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also removed the 3 patches as they have been added into the latest
version.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
[Thomas: drop autoreconf, no longer needed.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix license, it's MIT, not BSD
- use TARGET_CONFIGURE_OPTS instead of manually passing CC and AR
- use full destination path
- keep only sha256 hash
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway's voicemail plugin is only built if
libogg is selected, and even then there is no way to disable the plugin from
being built. This causes a example config file to be placed on
the target filing system that the user may not need or want, creates a 33K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the voicemail plugin optional, removes the check for libogg,
adds libogg as a dependency to the voicemail plugin, and selects the libogg
package automatically when the user selects the plugin.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the video room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the video room plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the video call plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 47K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the video call plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the text room plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 63K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the text room plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the streaming plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 133K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the streaming plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the record and play plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 68K .so
file on the target directory, and janus will also create a warning when ran
if the plugin does not have a matching configuration file setup by the user,
as it will not use the example config file by default.
This patch makes the record and play plugin a option.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the echo test plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 36K .so
file on the target directory, and janus will also generate a warning when
ran if the plugin does not have a matching configuration file setup by
the user, as it will not use the example config file by default.
This patch makes the echo test plugin optional.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway is built by default with the audio bridge plugin.
This causes a example config file to be placed on the target filing system
that the user may not need or want, creates a 119K .so
file on the target directory, adds the dependency of opus for this
plugin, and janus will also create a warning when ran if the plugin does
not have a matching configuration file setup by the user, as it will not use
the example config file by default.
This patch makes the audio bridge plugin a option, removes the check for opus,
adds opus as a dependency to the audio bridge plugin, and selects the opus
package automatically when the user selects the plugin.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently janus-gateway requires sofia-sip in the build system,
however this is unessasary. This patch makes the sip gateway plugin a
option. It also creates a menuconfig for janus gateway for the
following patches that enable selecting more optional plugins.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
janus-gateway currently depends on several dependencies that are not
mandatory. This commit removes all non-mandatory dependencies. The
build has been tested to work fine with this reduced set of
dependencies.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit updates comments in Config.in for BR2_USE_WCHAR for reverse
dependencies of util-linux which directly uses wchar now or when it is
pulled from other dependencies.
eudev doesn't use wchar directly, but needs C99 compiler. Autotools
generate code with wchar_t for checking C99 compiler.
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 006a328ad6 ("util-linux: fix build with ncurses") removed
dependency on BR2_USE_WCHAR, but failed to update the reverse
dependencies of util-linux.
This commit fixes all such reverse dependencies by removing dependency
on BR2_USE_WCHAR as it is not required by package itself.
Fixes: 006a328ad6 ("util-linux: fix build with ncurses")
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Usually, Buildroot does never initialize variables with empty content.
DEPENDENCIES_HOST_PREREQ was an unjustified exception.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- manually install things, it's easier than using the flawed install
rules of the package
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
[Thomas: minor tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds yet another development platform for ARC.
This time around it is HAPS or ZeBU based prototyping platform used
widely for both ARC hardware and software bring-up and verification.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is used by buildroot default initscripts and results in some ugly
errors on startup otherwise.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig" and "snps_axs103_defconfig":
- bump linux kernel version to 4.9.6
- set up host linux headers to 4.9
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No announcement was made for this version, so the hash was calculated locally.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ccache doesn't rewrite the --sysroot base_dir from toolchain-wrapper
correctly. Resulting in a large number of cache misses when building
from different base directories.
A fix has already been accepted to the ccache upstream[1], but won't be
released until ccache 3.4. (Was noted as an improvement, so unsure
of the 3.4 release timing)
[1] https://github.com/ccache/ccache/pull/132
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is the main command to control oprofile. It was introduced in
version 0.9.8 from 2012-08-27 and in version 1.0.0 the previous
control tool, opcontrol, was removed.
In commit 9863553fe8, removing avr32
support, code that added operf for !avr32 was removed rather than
keeping the code but making it non-conditional.
Signed-off-by: Trent Piepho <tpiepho@kymetacorp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The hook is only used to install firmware blobs, and so it
doesn't need to be declared after the kernel-module infra.
Move it where it belong, to avoid confusion.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gst-plugins-base configure script claims that the subparse plugin is
dependency-less - but it also silently disables subparse if libxml2 is
not available. So depend on libxml2 when subparse is selected.
Note: the analogous gst1 subparse plugin does not have this requirement.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- fix download location
- remove <pkg>_SOURCE variable, it was the default value
- remove trailing space
- keep only sha256 hash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2017-3731 - Truncated packet could crash via OOB read.
CVE-2017-3732 - BN_mod_exp may produce incorrect results on x86_64
CVE-2016-7055 - Montgomery multiplication may produce incorrect results
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adam has contributed the python-mutagen and sngrep packages, so add
him as a developer for those two packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
sngrep is a tool for displaying SIP calls message flows from terminal.
It supports live capture to display realtime SIP packets and can also
be used as PCAP viewer.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas:
- ncurses wide char and other sub-options are not needed to build
sngrep, so they are removed, as well as the wchar
dependency. ncurses with wchar support is only needed when
--enable-unicode is passed, but even then, it doesn't work because
the configure script searches <ncursesw/ncurses.h>, so unicode
support has been explicitly disabled.
- add optional dependencies on OpenSSL, GnuTLS and PCRE. This also
makes sure they are explicitly enabled/disabled depending on the
configuration.
- add upstream URL in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Mutagen is a Python module to handle audio metadata.
It supports ASF, FLAC, MP4, Monkey’s Audio, MP3, Musepack, Ogg Opus,
Ogg FLAC, Ogg Speex, Ogg Theora, Ogg Vorbis, True Audio, WavPack,
OptimFROG, and AIFF audio files. All versions of ID3v2 are supported,
and all standard ID3v2.4 frames are parsed.
It can read Xing headers to accurately calculate the bitrate and
length of MP3s. ID3 and APEv2 tags can be edited regardless of
audio format. It can also manipulate Ogg streams on an individual
packet/page level.
Mutagen works with Python 2.7, 3.3+ (CPython and PyPy) on Linux,
Windows and macOS, and has no dedependencies outside the
Python standard library.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
[Thomas:
- fix license, it's GPLv2, not LGPLv2+
- rewrap Config.in help text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
You can bootup a OpenRISC system, networking is not working.
[Peter: drop unneeded _GETTY_PORT="ttyS0" setting]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for OpenRISC. See here for more details about
OpenRISC http://openrisc.io.
All buildroot included upstream binutils versions are supported.
Gcc support is not upstream, to be able to enable musl C library
support later, we use the branch with musl support.
At the moment it is possible to build a musl based toolchain,
but bootup in Qemu fails.
Gdb is only working to debug bare-metal code, there is no support
for gdbserver/gdb on Linux, yet.
[Peter: drop ?= for GCC_SOURCE]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpcre is needed at runtime not a buildtime. Indicate this in Config.in
and remove MICROPYTHON_LIB_DEPENDENCIES.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While bumping fix async feature related issue:
Both asyncsupport.py and asyncfilters.py use async feature, that is
not available in Python 2 and some features available in Python 3.6.
So in both cases *.py compilation would produce compiler errors.
Hence remove both files after package extraction.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Lionel Flandrin <lionel@svkt.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a bug-fix release that addresses the musl libc compatibility
issues encountered with buildroot.
We can also remove the patch which got merged upstream.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As recently discussed on the list:
http://lists.busybox.net/pipermail/buildroot/2017-January/182147.html
eudev no longer has legacy user space firmware loading and the
--with-firmware-path configure flag since the 3.1.3 release:
commit 3b717594600fa717cdf9bcfd0c7c1b703b245482
Author: Kay Sievers <kay@vrfy.org>
Date: Mon Sep 1 09:07:49 2014 -0400
udev: remove userspace firmware loading support
Signed-off-by: Anthony G. Basile <blueness@gentoo.org>
So drop it from EUDEV_CONF_OPTS to limit confusion.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 46d6aa520f.
Since commit 7c60211ce3 (tslib: needs kernel headers 3.12)
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_12 is always enabled when building tslib. No
need to check for that.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
[Thomas:
- keep only sha256 hash, not needed to have md5 and sha1 when sha256 is
provided
- add BR2_USE_MMU dependency, since the program uses fork()
- remove UDPXY_MAKE_OPTS, and use the appropriate options during the
build and install steps directly
- use TARGET_MAKE_ENV in the build and install steps]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit also adds a patch that allows libselinux 2.6 to build
properly with older compilers such as gcc 4.4.
Signed-off-by: Adam Duskett <aduskett@codeblue.com>
[Thomas: add patch to fix gcc 4.4 build issue.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When SELinux support is enabled, the login pam file installed by
linux-pam should be adjusted to use the pam_selinux.so module.
To achieve this in a reasonably simple manner, we introduce the SELinux
related lines in login.pam as comments, and if SELinux support is
enabled, turn those commented lines into real lines.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using += is always a good idea in conditional assignments, as it
prevents potential future mistakes if unconditional options are added;
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As it happens, specifying the path where to look for libsrtp is not
needed: pjsip does not use the argument to --with-external-srtp as a
search path at all; it only checks whether it is 'no' or something
else.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are a bunch of options that are left unspecified; explicitly
disable them.
The epoll case is special: the configure script is broken, and will
enable it whether we pass --enable-epoll or --disable-epoll. But that's
OK because we prefer epoll over the alternative (select). So we do not
need to fix it. Which is nice becasue the configure.ac is named
aconfigure.ac (yes, with a leading 'a'), so it does not autoreconf
nicely... :-/
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Flask-Babel is an extension to Flask that adds i18n and l10n support
to any Flask application with the help of babel, pytz and
speaklater. It has builtin support for date formatting with timezone
support as well as a very simple and friendly interface to gettext
translations.
Signed-off-by: Lionel Flandrin <lionel@svkt.org>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Here are the main U-Boot modifications:
- Fix second Ethernet port for SoloX
- Fix LCD disable sequence
- Fix LVDS2 as primary display
Here are the main Linux modifications:
- Rebase on top of NXP 4.1.15_2.0.0 branch
- Fix touch screens interrupt conflicts
- Backport tw686x features from mainline
- Fix multiple ft5x06 touch instantiation
- Fix dirty cow vulnerability
- Various improvements to TC358743 driver
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The micropython libs load libpcre dynamically using the foreign function
interface (libffi). Without pcre the build will succeed but at run time
anything that uses the 're' module will have issues.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The install step now requires CROSS_COMPILE as some C files are
generated at install time. Also remove patches that have been applied
upstream.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop libbsd support, it's problematic and doesn't bring in any greater
benefit.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
wnpa-sec-2017-01 - The ASTERIX dissector could go into an infinite loop.
wnpa-sec-2017-02 - The DHCPv6 dissector could go into a large loop.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The RPM package requires dynamic linking support (dlfcn.h) for its
capabilities related to plugins (and possibly more). The following
commit adds a dependency to !BR2_STATIC_LIBS.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
--enable-password-save option has been removed
(9ffd00e754). Since
it now defaults to "enabled" in the upstream package, there is no
point in adding Config.in.legacy support for it: Config.in.legacy
logic only kicks in when the option is enabled, but the upstream
package precisely preserve the compatibility with this situation.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 2f89476 ("package/libgpg-error: bump to version 1.23") introduced
a BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS which was added as a dependency
to all libgpg-error reverse dependencies.
However, rng-tools only select libgpg-error if BR2_i386 || BR2_x86_64
(for RDRAND) but the rng-tools dependency was added as
BR2_PACKAGE_LIBGPG_ERROR_ARCH_SUPPORTS && (BR2_i386 || BR2_x86_64),
Therefore limiting rng-tools to the x86 architecture.
This patch changes it as ..._ARCH_SUPPORT || !(BR2_i386 || BR2_x86_64).
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ortp now depends on bctoolbox, which means we have to add the C++
dependency of bctoolbox to ortp and its reverse dependencies.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bctoolbox is a utilities library used by Belledonne Communications
softwares like belle-sip, mediastreamer2 and linphone.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add missing dependency on BR2_INSTALL_LIBSTDCPP.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Added the pure-ftp quotas option. When selected, the --with-quotas
compiler option is passed which enables the quota feature
Note that this increases the size of the pure-ftpd executable by
about 20%.
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The developper's documentation will be automatically built when doxygen
is present. But we can't guarantee that it is.
Besides, we are not interested in the devlopper's documentation.
Simply disable it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb 7.12+ by default builds with a C++ compiler, which naturally doesn't
work when we don't have C++ support in the toolchain.
Fix it by passing --disable-build-with-cxx for such setups.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On Darwin, user's trust preferences for root certificates were not honored.
If the user had a root certificate loaded in their Keychain that was
explicitly not trusted, a Go program would still verify a connection using
that root certificate. This is addressed by https://golang.org/cl/33721,
tracked in https://golang.org/issue/18141. Thanks to Xy Ziemba for
identifying and reporting this issue.
The net/http package's Request.ParseMultipartForm method starts writing to
temporary files once the request body size surpasses the given "maxMemory"
limit. It was possible for an attacker to generate a multipart request
crafted such that the server ran out of file descriptors. This is addressed
by https://golang.org/cl/30410, tracked in https://golang.org/issue/17965.
Thanks to Simon Rawet for the report.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, mariadb's cmake script tries to detect dtrace support. On
hosts that have dtrace installed, this incorrectly enables dtrace and
causes compile errors.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a package containing a C library and a set of command-line tools
for controlling GPIOs from user space using the new character device
interface on linux.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
[Thomas:
- add comment about autoreconf=yes (suggested by Romain Naour)
- add more conventional syntax for the --{enable,disable}-tools usage
(suggested by Romain Naour)
- add patch to fix musl build.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
RunC allowed additional container processes via runc exec to be ptraced by
the pid 1 of the container. This allows the main processes of the
container, if running as root, to gain access to file-descriptors of these
new processes during the initialization and can lead to container escapes or
modification of runC state before the process is fully placed inside the
container.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 5a18eabdf0.
It did not take into account all the possible situations. A different fix
will be provided in a forthcomming patch.
Signed-off-by: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2017-0381: A remote code execution vulnerability in
silk/NLSF_stabilize.c in libopus in Mediaserver could enable an attacker
using a specially crafted file to cause memory corruption during media file
and data processing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop patches now upstream. Also enable internal glob() handling in ash,
as busybox now errors out if this isn't enabled when building for uClibc
because of bugs in the the glob(3) implementation in uClibc and musl since:
commit 3a4cdf45f928de0af09088bbbb96f60d9ac44e87
Author: Denys Vlasenko <vda.linux@googlemail.com>
Date: Wed Dec 21 04:13:23 2016 +0100
ash: error out if ASH_INTERNAL_GLOB is not selected on uClibc
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
compile also open possix
remove power management (compiled by default since commit
b74bbed51b0c0d44b70b136326a8a23cbc64db01)
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes static linking of pifmrds [1]:
host/usr/bin/arm-linux-gcc -static -o pi_fm_rds rds.o waveforms.o pi_fm_rds.o fm_mpx.o control_pipe.o -lsndfile -lm
.../host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(flac.o): In function `sf_flac_error_callback':
flac.c:(.text+0x44c): undefined reference to `FLAC__StreamDecoderErrorStatusString'
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(ogg.o): In function `ogg_close':
ogg.c:(.text+0x10): undefined reference to `ogg_sync_clear'
host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libsndfile.a(ogg_vorbis.o): In function `vorbis_read_sample':
ogg_vorbis.c:(.text+0x26c): undefined reference to `vorbis_synthesis_pcmout'
[1] http://autobuild.buildroot.net/results/9b7/9b7638caa8f3e82e38fb68b0321cb649618a0131
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-9317 - gdImageCreate() doesn't check for oversized images and
as such is prone to DoS vulnerabilities.
CVE-2016-6912 - double-free in gdImageWebPtr()
(without CVE):
Potential unsigned underflow in gd_interpolation.c
DOS vulnerability in gdImageCreateFromGd2Ctx()
Signed Integer Overflow gd_io.c
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
[Thomas:
- move condition to a different place in the .mk file, with other
similar conditions.
- add an 'else' clause to pass -no-libinput in order to explicitly
disable libinput support when the libinput package is not available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.20.x does not depend on libglib2 anymore. Note, that the
dependency on MMU and Thread remain, as MPD uses fork() and thread
functionality.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#9576
When the path to a br2-external tree is relative, make enters an endless
recursive loop (paths elided for brevity):
$ make BR2_EXTERNAL=.. foo_defconfig
make[1]: stat: ../configs/../configs/../configs[...]/toto_defconfig: Filename too long
make[1]: *** No rule to make target '../configs/../configs/../configs[...]/toto_defconfig',
needed by '../configs/../configs/../configs[...]/toto_defconfig'. Stop.
Makefile:79: recipe for target '_all' failed
make: *** [_all] Error 2
It is a bit complex to understand the actual technical reason for this
never-ending expansion; it seems it happens in the code generated by the
percent_defconfig macro. Not sure why, though...
But the root cause is the relative path.
Just use absolute, canonical paths to br2-external trees. Always.
[Peter: add bugzilla reference]
Reported-by: outtierbert@gmail.com
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove patch not needed anymore: the bug has been fixed in this release.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/1d6/1d6bbef2cb0c8c2e00b6d7511814ff9ddb2e3073/http://autobuild.buildroot.net/results/4c7/4c7fc92a42405e25f41394fa44f5bdc27a4538c4/
Apperently if both icu and nodejs are enabled during the nodejs host build
the nodejs buildsystem gets confused by the icu version installed by
Buildroot (icu 58.2) and the one bundled with the nodejs source tree(icu
57), which ends up in linking-time errors as:
"""
undefined reference to
`icu_58::NumberFormat::format(icu_58::StringPiece,
icu_58::UnicodeString&, icu_58::FieldPositionIterator*, UErrorCode&)
const'
"""
(note the icu_58 in the symbol name while the bundled icu version is 57)
This patch disables the (not used) i18n support in the nodejs host build
config in order to fix the issue. The issue doesn't affect the target build of
nodejs.
[Peter: add autobuilder references]
Signed-off-by: Zoltan Gyarmati <mr.zoltan.gyarmati@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also...
- Fix a typo in Config.in
- Take into account the host's architecture to download the x86 or
x86_64 version. This makes the IA32 libs dependency in unnecessary.
[Peter: fix kernel headers comment as pointed out by Romain]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a critical authentication vulnerability in the MQTT plugin
(CVE-2016-9877):
MQTT (MQ Telemetry Transport) connection authentication with a
username/password pair succeeds if an existing username is provided but the
password is omitted from the connection request. Connections that use TLS
with a client-provided certificate are not affected.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The problem addressed by 0001 patch has been fixed upstream and is that
fix is included in this release:
aa107497cd
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches from 4.8 version don't apply. Update them by backporting
liteBoard support from Linux master branch.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is already support in newest U-Boot version, so drop existing
U-Boot patches.
Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-Fix-Add-missing-pthread.h-include.patch already included in this
release:
5f702b6071
--with-xml-prefix configure option doesn't exist, so drop it:
configure:22815: WARNING: unrecognized options: [snip], --with-xml-prefix
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfixes:
- CVE-2016-9131: A malformed response to an ANY query can cause an
assertion failure during recursion
- CVE-2016-9147: An error handling a query response containing inconsistent
DNSSEC information could cause an assertion failure
- CVE-2016-9444: An unusually-formed DS record response could cause an
assertion failure
- CVE-2016-9778: An error handling certain queries using the
nxdomain-redirect feature could cause a REQUIRE assertion failure in db.c
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use upstream provided tarball.
Upstream switched to cmake.
libjpeg dependency is now optional.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although tremor (the library is named vorbisidec) provides a pkg-config
file, mpd does not use it to find tremor. Since version 0.20 does throw
an error instead of a warning, that's why the issue was left unnoticed
by the autobuilders.
Help mpd to find tremor by providing the path to the library and passing
LIBS through the environment. We use the host pkg-config tool to get the
correct values from the vorbisidec.pc file.
Fixes:
http://autobuild.buildroot.net/results/6b9/6b97403e70caa12c32494b1c82ce61d3e4e456f6/
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
[Peter: part 2, boot.scr / defconfig changed accidently got dropped]
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build of the ustr package also needs to not run the ldconfig to
prevent a build failure caused by the symlink creating a race condition.
Related commit for target build change was 22069232.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to U-Boot 2017.01, which supports mx6sx_udoo_neo by default.
Remove the U-Boot patch that we used for the previous version.
Also adjust the 'fdtfile' name as it has been changed in U-Boot
mainline.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version is marked as "stable" on php-imagick's website, plus is
necessary for the upcoming php-7.1 version bump.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.5.x has been promoted to stable, hence 3.4.x is deprecated and
3.3.x kept as old-stable.
libdane now specifies LGPLv2.1+ so drop the README kludge (which is also
gone regarding licensing).
libunistring is a new dependency, even though gnutls ships a builtin version
we prefer to use unbundled to avoid duplication with other users and target
size growth.
Fixes:
GNUTLS-SA-2017-01 - It was found using the OSS-FUZZ fuzzer
infrastructure that decoding a specially crafted X.509 certificate with
Proxy Certificate Information extension present could lead to a double
free.
GNUTLS-SA-2017-02 - It was found using the OSS-FUZZ fuzzer
infrastructure that decoding a specially crafted OpenPGP certificate
could lead to heap and stack overflows.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-8707 (Fix possible buffer overflow when writing
compressed TIFFS). This CVE fix is included since 7.0.3-9:
fde5f55af9
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove the patch since it's already contained in this release.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3d707d2b (mysql: rename package to oracle-mysql, make a virtual
package) introduced a user selectable virtual BR2_PACKAGE_MYSQL package, but
didn't propagate the (common) dependencies of the two variants to it, so the
virtual package can now be selected even though neither of the variants are
available.
As several packages enable mysql support when BR2_PACKAGE_MYSQL is selected,
this causes a number of autobuilder issues:
http://autobuild.buildroot.net/results/7fe/7fe0d0a3e7ed0430852dc42b718dd037557207e8/http://autobuild.buildroot.net/results/cc4/cc4c2d936f3e1ba6c0a9782b2218de54a4ff75d2/
Fix it by propagating the common dependencies of the two variants to the
virtual package to ensure it cannot be enabled unless at least one of them
are available.
Also move the toolchain comment outside the conditional so it is visible
when mysql isn't available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the KMS video sink element. From the Gstreamer 1.10
release notes:
"New element kmssink to render video using Direct Rendering Manager (DRM)
and Kernel Mode Setting (KMS) subsystems in the Linux kernel. It is oriented
to be used mostly in embedded systems."
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f09b33a0a (qextserialport: fix static build) adjusted the logic for
static builds, but the change contained a typo - It disabled
_INSTALL_STAGING for static builds, not _INSTALL_TARGET.
The autobuilders didn't detect this as nothing links against qextserialport
(so the missing staging install didn't cause issues) and the target install
command was only defined for !static.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recent perls are built with the `default_inc_excludes_dot` option.
As many CPAN modules rely on '.' in @INC, the toolchain
must set `PERL_USE_UNSAFE_INC`.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3fd9c062e (nodejs: bump to version 6.9.2) bumped the 6.x version but
forgot to rename the patch directory, so the patches were no longer used.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ecore will reach 'upower' using D-Bus system bus in order to detect if
the system state changes and let applications know about the power
state such as low battery or AC power in order to optimize their power
consumption.
For host this is not needed and would not work, since output/host DBus
declares its own output/host/var/run/dbus/system_bus_socket, which has
no dbus-daemon and thus no services in it.
For target it's optional and only installed if BR2_PACKAGE_UPOWER=y,
otherwise it prints error messages about missing upower service.
Signed-off-by: Gustavo Sverzut Barbieri <barbieri@profusion.mobi>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We unfortunately cannot easily download these because of the file names (not
ending in patch) and patch format (p0), so convert to p1 format and include
in package/bash.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Revert the decision to remove the wrappers, but remove the extra
Config symbol and add it by default. Required for kmod package.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security related fixes:
- Heap-based buffer overflow in rfbproto.c in LibVNCClient in LibVNCServer
before 0.9.11 (CVE-2016-9941)
- Heap-based buffer overflow in ultra.c in LibVNCClient in LibVNCServer
before 0.9.11 (CVE-2016-9942)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfixes:
- CVE-2017-5193: Correct a NULL pointer dereference in the nickcmp function
found by Joseph Bisch (GL#1)
- CVE-2017-5194: Correct an error when receiving invalid nick message (GL#4,
#466)
- CVE-2017-5195: Correct an out of bounds read in certain incomplete control
codes found by Joseph Bisch (GL#2)
- CVE-2017-5196: Correct an out of bounds read in certain incomplete
character sequences found by Hanno Böck and independently by J. Bisch
(GL#3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patches and related autoreconf.
Re-enable parallel builds to check against the autobuilders.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patch #0002 which was already fixed upstream long time ago in
commit 276a0d9500b8efc879e4f0c23e9d0e361849e295 using a slightly
different approach.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update our patches:
- drop patch 1, replaced by an upstream equivalent; adapt config
options and env accordingly,
- drop patch 2, applied upstream,
- rename patch 3
gdlib-config and net-snmp-config are only used when said support is
enabled (resp. CGI and SNMP), so no need to pass them unconditionally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security related fixes:
This flaw is caused by loading data from external sources (file, custom ctx,
etc) and are hard to validate before calling libgd APIs:
- fix php bug 72339, Integer Overflow in _gd2GetHeader (CVE-2016-5766)
- bug #248, fix Out-Of-Bounds Read in read_image_tga
- gd: Buffer over-read issue when parsing crafted TGA file (CVE-2016-6132)
Using application provided parameters, in these cases invalid data causes
the issues:
- Integer overflow error within _gdContributionsAlloc() (CVE-2016-6207)
- fix php bug 72494, invalid color index not handled, can lead to crash ( CVE-2016-6128)
- improve color check for CropThreshold
The build system now enables -Wall and -Werror by default, so pass
--disable-werror to disable that. Notice that this issue has been fixed
upstream post-2.2.3:
https://github.com/libgd/libgd/issues/339
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changed _SITE url to the upstream project site because Sourceforge does
not provide the tarball for 1.2.10 as of now.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
enca and libguess options have been dropped so adjust accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Riemann-c-client is a C client library for the Riemann monitoring system,
providing a convenient and simple API, high test coverage and a copyleft
license, along with API and ABI stability.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump Linux kernel versio to 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2016-8859 - fixes a serious under-allocation bug in regexec due to
integer overflow.
Drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though 'CONFIG_USB=n' does the job, let's switch to the more
standard way for disabling a Kconfig symbol.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.9 and U-Boot to 2016.11.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream commit a8c696bf09d8151323f6e99348c4bc8989f829c8 makes ifup and
ifdown individually selectable, but forgets to update the dependency to
IFUPDOWN_UDHCPC_CMD_OPTIONS, so it is not selectable anymore.
Add a patch which fixes the dependency by checking for IFUP or IFDOWN,
instead of the obsolete IFUPDOWN.
Upstream status: Pending
http://lists.busybox.net/pipermail/busybox/2016-December/085034.html
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the minimal configuration file. There is at
least one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the minimal configuration file by loading the busybox.config file
and saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 44a563dbc0 bumps busybox to version
1.26.0, but does not update the configuration file. There is at least
one issue using the old configuration with the newer busybox:
* IFUPDOWN is split into IFUP and IFDOWN in version 1.26.0
Update the configuration file by loading the busybox.config file and
saving it back.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a NULL pointer dereference bug in png_set_text_2()
CVE not assigned yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch did contain the correct newlines, but they got stripped by
patchwork so now the patch no longer applies.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The LUAROCKS_TARGET_FINALIZE_HOOKS is not running, so detritus is being left
in /usr/lib/luarocks. This is because host-luarocks is built by being a
dependency in the luarocks package infrastructure, not by being selected by
kconfig symbol. This means that the $(PKG)_KCONFIG_VAR in pkg-generic.mk is
not met, and (HOST_)LUAROCKS_TARGET_FINALIZE_HOOKS is not added to the
global TARGET_FINALIZE_HOOKS.
This mod fixes this issue by adding the host-luarocks hook directly
to TARGET_FINALIZE_HOOKS when either lua or luajit is enabled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_MDEV allows the Broadcom wireless driver
to be automatically loaded on boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use mainline 4.9 instead of a custom kernel based on NXP 4.1.
As mx7 boots in non-secure mode in mainline kernel, change the
U-Boot target to "warp7".
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tar --no-recursion option is position sensitive. It only affects following
file listing options. Move --no-recursion before the -T option to make it
effective. This fixes duplication of entries in the generated rootfs.tar
archive.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Keep BR2_TOOLCHAIN_HAS_BINUTILS_BUG_19405 since it's not fixed in
Binutils 2.26.
Runtime tested with an experimental version of Qemu 2.7 for Nios2.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Recently, the autoconf macros for libtool started using '/usr/bin/file'
to determine the type of library that is generated by the toolchain.
Packages that use this recent version of the libtool autoconf macros
will fail in a rather dramatic way when /usr/bin/file is not present
on the host: the package will still build but no shared library is
generated, which in turn may cause build failures in other packages
that link with it.
For example, libpng's configure determines that it is not possible to
build a shared library on MIPS64 because the expected output from 'file'
is not present. Therefore, only a static libpng.a is built. Later,
bandwithd links with -lpng but it doesn't use the pkg-config's
Private-Libs (because it's not linking statically) and it doesn't have
access to the NEEDED reference from the shared library. Therefore, it
doesn't link with zlib and fails with
pngrutil.c:(.text+0x55c): undefined reference to `inflate'
We cant use host-file because it is itself an autotools package and is
itself using libtool, so this would be a chicken-n-egg problem. Besides,
the libtool script really wants to call /usr/bin/file, so it would not
even find our host-file anyway.
So, just require that '/usr/bin/file' is present on the host.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The module DB_File (Berkeley DB wrapper) is a Perl core module.
Long time ago, its build as a core module was broken.
Since perl-cross-1.0.2, this issue is fixed.
So, this package which build DB_File as CPAN module, becomes useless.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove all patches as they are upstream.
Remove MALLOC_GLIBC_COMPAT and UCLIBC_HAS_OBSTACK as they got removed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No features are added or removed. This release contains
just a fix for CVE-2016-9963
- Fix CVE-2016-9963 - Info leak from DKIM. When signing DKIM, if
either LMTP or PRDR was used for delivery, the key could appear in
logs. Additionally, if the experimental feature "DSN_INFO" was used,
it could appear in DSN messages (and be sent offsite).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At compile-time the docker build scripts generate a version file used
to build the output of the docker version command. This file is
generated somewhat properly by the Buildroot build system, however the
version number and commit ID are incorrectly formatted. This patch fixes
the output to the correct format.
This is important as some tools like WeaveWorks won't even start unless
they can parse the Docker Version output correctly.
[Peter: strip v from version using patsusbt]
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the write_prometheus plugin, it requires the
libmicrohttpd and protobuf-c libraries.
[Peter: add note about where dependencies come from]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the gps plugin that uses libgps from the gpsd
package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libpqos library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libdpdk library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new hugepages dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libgrpc++ library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the mqtt (mosquitto) plugin.
Place it under the write category even though it can read as well, since
it will normally be used to write (publish) rather than read
(subscribe).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new cpusleep dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new chrony dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It requires the libxenctrl library which buildroot doesn't provide yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's intended for solaris so no usage case for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's a no-op since it's disabled/enabled by the config knob.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add explicit support for the new notify_nagios dependency-less plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-9594 - Unitilized random
Libcurl's (new) internal function that returns a good 32bit random value was
implemented poorly and overwrote the pointer instead of writing the value
into the buffer the pointer pointed to.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which includes the gcc5+ fix for ftrace:
commit aeea3592a13bf12861943e44fc48f1f270941f8d
Author: Behan Webster <behanw@converseincode.com>
Date: Wed Sep 24 01:06:46 2014 +0100
ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
With compilers which follow the C99 standard (like modern versions of gcc and
clang), "extern inline" does the wrong thing (emits code for an externally
linkable version of the inline function). In this case using static inline
and removing the NULL version of return_address in return_address.c does
the right thing.
Signed-off-by: Behan Webster <behanw@converseincode.com>
Reviewed-by: Mark Charlebois <charlebm@gmail.com>
Acked-by: Steven Rostedt <rostedt@goodmis.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
Otherwise, the build dies with:
arch/arm/kernel/return_address.c:66:7: error: redefinition of ‘return_address’
void *return_address(unsigned int level)
^
In file included from include/linux/ftrace.h:20:0,
from arch/arm/kernel/return_address.c:12:
./arch/arm/include/asm/ftrace.h:48:21: note: previous definition of ‘return_address’ was here
extern inline void *return_address(unsigned int level)
^
For more details, see:
https://travis-ci.org/buildroot/buildroot-defconfig-testing/jobs/185616889
notice: Only build tested as I don't have the hw, which is also why the
kernel is only bumped to 3.18 to make it as safe as possible.
CC: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 006a328ad6 ("util-linux: fix
build with ncurses"), we have a build failure that occurs with musl
toolchains when wide-char support is not enabled in ncurses.
The problem comes from the fact that musl provides wchar support (so it
defines wchar_t). But when ncursesw is not available, we currently pass
--disable-widechar which tells util-linux that wchar support is not
available at all (not only in ncurses). When this gets passed to
util-linux configure script, then it defines its own wchar_t, which
conflicts with the musl definition.
So, we should not pass --disable-widechar when BR2_USE_WCHAR=y, which is
what this commit does: it moves the BR2_USE_WCHAR logic outside of the
ncurses logic, and passes --enable-widechar/--disable-widechar as
appropriate.
However, there's a gotcha: util-linux really wants the ncursesw variant
of ncurses when the system has wchar support enabled. We take this into
account by:
- Enabling ncursesw when BR2_PACKAGE_NCURSES_WCHAR=y. In this case, we
have ncurses and we have BR2_USE_WCHAR=y, so everything is fine.
- Otherwise, enabling ncurses when BR2_PACKAGE_NCURSES=y but
BR2_USE_WCHAR is disabled.
To make sure that the existing util-linux programs that need ncurses
support still build fine, we adjust the Config.in to select
BR2_PACKAGE_NCURSES_WCHAR on BR2_USE_WCHAR=y configurations.
Fixes:
http://autobuild.buildroot.net/results/19de2a0b12380ddc86dbba0dae3a3877b25f83ff/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch 0002-arm-add-phys_to_virt.h-and-iomem.patch is now obsolete as
it's been properly fixed upstream now.
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package provides skalibs, a collection of free software / open
source C development files used for building all softwares from
skarnet.org.
Note that, though skalibs (and all skarnet softwares) follows the
"./configure; make; make install" convention, it does not behave like a
traditional autotools project:
- static libraries are installed in $prefix/usr/lib/skalibs.
- pkg-config and libtool are not used: instead a custom system called
"sysdeps" is used and locations to libraries and headers are to be
passed explicitly via options of the './configure' script.
The host variant is provided to allow building the host variants of the
other skarnet softwares.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas: remove post install target hook, do it directly in the target
installation commands.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
util-linux version 2.29 changed ncurses handling a lot. pkg-config
support to detect ncurses is removed from configure.ac and
ncurses-config is used to detect it. But it even didn't allow to
change config file for cross compilation. However, it is fixed in
upstream later and pkg-config support is added back.
This commit adds two patches from upstream that adds pkg-config support
and allows specifying ncurses-config file as well. However preference is
first given to pkg-config and later ncurses-config file. It also first checks
for version 6 and later 5.
Config option that changed are, ncursesw is enabled by default and ncurses
is disabled by default. So we need to explicilty specify with/without wide
char support now. This new version also allows disabling widechar support.
But it can't be enabled if ncurses without widechar support is enabled.
While building ncurses package, we explicitly enable pkg-config support,
so we don't need to specify ncurses-config file, but it is specified for
completeness.
Fixes:
http://autobuild.buildroot.net/results/4a2/4a25fb0d4546391d5dbbaa6cde17c45aeddb3549
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Cc: Carlos Santos <casantos@datacom.ind.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version bump as a dependency of Docker-Engine v1.12.5.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the libc-compat.h musl workaround patch to the copy of the kernel header.
Add a patch adding missing limits.h for musl.
Drop 0001-Avoid-in6_addr-redefinition.patch; not needed after the
libc-compat.h patch.
Drop upstream 0003-iproute2-tc_bpf.c-fix-building-with-musl-libc..patch.
Drop 0004-iproute-no-iptables.patch; should be fixed by upstream commit
4710e46ec3 (tc, ipt: don't enforce iproute2 dependency on iptables-devel).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's missing the dependency on lua, hence when using the upcoming PPS
support its staging directory isn't populated with the required
dependencies resulting in build failure.
Signed-off-by: Gustavo Zacarias <gustavo.zacarias@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
commit 9101ce5800 (runc: pass -extldflags '-static' on when
BR2_STATIC_LIBS=y) contained a small copy/paste error, FLANNEL_GLDFLAGS was
used instead of RUNC_GLDFLAGS.
[Peter: refer to exact commit]
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2016-7067.
Note that since version 5.20.0 monit optionally depends on zlib.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"\r\n" sequences were not properly filtered when handling redirections.
This allowed an attacker to perform CRLF attacks such as HTTP header
injection:
https://github.com/bottlepy/bottle/issues/913
Python-bottle now uses setuptools instead of distutils.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Added the pure-ftpwho config option. When selected, the --with-ftpwho
compiler option is passed which enabled the pure-ftpwho command.
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
* Fix a NULL pointer dereference (#776026)
* Fix a memory leak (#776020)
* Avoid a buffer overrun in the qtif loader ($#775648)
* Fix a crash in the bmp loader (#775242)
* Fix crash opening pnm images with large dimensions (#775232)
* Prevent buffer overflow in the pixdata loader (#775693)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These aren't supported upstream any more so remove the options and add
them to legacy.
Also switch the older deprecations that used 3.14.x to 3.12.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option `BR2_LINUX_KERNEL_CUSTOM_LOCAL` no longer exists (see commit
e782cd5b1b [1]); removing the option. Note
that this legacy option has already been handled (Config.in.legacy) in
the mentioned commit.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rsyslog package provides input and output plugins for journald which
are disabled by default. The following adds the option to include
`imjournal` and `omjournal` modules when building for a systemd target.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configuration flags `--enable-systemd` and `--disable-systemd` do
not exist in rsyslog (and may have never existed; most likely copy-paste
from other packages which have said options); removing the options.
Signed-off-by: James Knight <james.knight@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 3e3fef39e7 added new and improved
patch handling, with BR2_TARGET_UBOOT_PATCH. This was in addition to
the existing BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR option, that only
handled directories.
Later, commit 21b25d28fc moved the old
BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR to legacy options. But on the way,
bad things happened:
* The original option was a string, while the one added to Config.in.legacy
is a bool. This results in a warning from defconfigs that actually define
the old BR2_TARGET_UBOOT_CUSTOM_PATCH_DIR (because a string is not a valid
value for a bool), but it does not result in the legacy option being
selected. Consequently, BR2_LEGACY is not selected either.
* The advice at the top of Config.in.legacy to add a hidden WRAP option
to select BR2_LEGACY was not heeded.
* The advice at the top of Config.in.legacy to use the old string
option as the default for the new string option was not heeded. In
this case, the variable was not just renamed, as the old option
supported directories only, while the new one supports files too.
But since the old option is a subset of the new option, it can still
be used to set a useful default.
So, this mod turns the legacy option back to a string, adds a hidden
bool WRAP option to set BR2_LEGACY when the string is non emoty, and
uses the legacy option to set the default for the new option.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "command-line editing support was updated" does not indicate
the package name, unlike the other legacy options. This commit
adds "sqlite", to be nicer.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix out-of-bound access in create_url_list()
If there is an invalid URL in URLS->buf after a valid one, uri_parse is
called with out pointing after the allocated memory. As uri_parse writes
to *out before returning an error the loop in create_url_list must be
stopped early to prevent an out-of-bound access.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If there's no registered handler for a POST request, the default behaviour
is to write it to the filesystem. Several million deployed devices appear
to have this behaviour, making it possible to (at least) store arbitrary
data on them. Add a configure option that enables this behaviour, and change
the default to just drop POSTs that aren't directly handled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two new dependencies:
python-contstantly: runtime only
python-incremental: both runtime and build-time dependency
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2016-10009 - ssh-agent(1): Will now refuse to load PKCS#11 modules
from paths outside a trusted whitelist
CVE-2016-10010 - sshd(8): When privilege separation is disabled,
forwarded Unix-domain sockets would be created by sshd(8) with the
privileges of 'root'
CVE-2016-10011 - sshd(8): Avoid theoretical leak of host private key
material to privilege-separated child processes via realloc()
CVE-2016-10012 - sshd(8): The shared memory manager used by
pre-authentication compression support had a bounds checks that could be
elided by some optimising compilers
http://seclists.org/oss-sec/2016/q4/708
Drop upstream patch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09 release version.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This configuration provides a basic setup for using Buildroot
to create a sd-card image a BeagleBoard X15 board.
[Peter: use 512M ext4 partition, linux 4.9 and u-boot 2016.11]
Signed-off-by: Theo Debrouwere <Theo.Debrouwere@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xfsprogs now builds fine with Buildroot default uClibc configuration, so
there is no point in having a specific comment: we don't have this for
any other package, and it's basically impossible to maintain.
UCLIBC_SV4_DEPRECATED is still disabled in the Buildroot default uClibc
configuration, but xfsprogs builds fine without it.
UCLIBC_HAS_OBSOLETE_BSD_SIGNAL is now enabled in the Buildroot default
uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to the new upstream site on kernel.org, and to a .tar.xz
tarball. The patches are simply refreshed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first patch was Git formatted, but additional information at the top
made it unapplicable by Git, fix this.
The second patch was not Git formatted at all.
Since upstream uses Git, it makes sense to have Git formatted patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow installation of the x11 egl support required for the X11 ddx
driver. The BR2_PACKAGE_ODROID_MALI_X11 hidden option will be selected
by the X11 DDX driver.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas:
- select BR2_PACKAGE_LIBDRM,
BR2_PACKAGE_XLIB_{LIBX11,LIBXFIXES,LIBXEXT,LIBXDAMAGE} from
BR2_PACKAGE_ODROID_MALI_X11 in order to avoid numerous "if" in
Config.in
- Use a single assignment to ODROID_MALI_DEPENDENCIES to add the
dependencies for libdrm and the X11 libraries.
- Introduce ODROID_MALI_HEADERS_SUBDIR and ODROID_MALI_LIBS_SUBDIR to
clarify the location of the headers and libraries for the selected
architecture/display backend in the Mali tree.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When systemd is selected, xorg-server must have config-udev-kms
enabled in order to build correctly, but it won't be the case if
BR2_PACKAGE_XPROTO_DRI2PROTO is not part of the build.
Add BR2_PACKAGE_XPROTO_DRI2PROTO as a dependency of xorg-xserver
only when systemd is part of the build.
Fixes bug #9486.
Signed-off-by: Fabien Parent <fparent@baylibre.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version add the C++11 support and microdump.
Add the C++11 dependency since it's now mendatory.
Use the same linux-syscall-support version as the one defined by DEPS
file in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
[Thomas: propagate the C++11 related dependency to
BR2_GOOGLE_BREAKPAD_ENABLE.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Google-breakpad moved to a new git repository last year and the old svn
repository has been deleted. So, the Buildroot archive mirror is used.
svn: E160013: Unable to connect to a repository at URL 'http://google-breakpad.googlecode.com/svn/trunk'
svn: E160013: '/svn/trunk' path not found
--2016-11-27 10:42:34-- http://sources.buildroot.net/google-breakpad-1373.tar.gz
Swith to the git repository using the git hash corresponding to the
1373 svn revision. But there is an issue with the third parties...
Some of them are not bundled with Google-breakpad or as git submodule.
Even worst, the google-breakpad source code use #include
"third_party/lss" directly, so we can't provide missing third parties
with an external package.
That's why the linux-syscall-support package was added to Buildroot,
it provide the missing linux_syscall_support.h file which is must be
copied to src/third_party/lss/ in the Google-breakpad sources.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pascal Huerst <pascal.huerst@gmail.com>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same way TARGET_CC was not being used during the build, TARGET_AR
was not used either. Now TARGET_CONFIGURE_OPTS is injected into
LVM2_MAKE_ENV which should include all the toolchain substitutions.
Signed-off-by: Jordan Yelloz <jordan@yelloz.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If not set the system will use an empty string which will result in
download errors for 'linux-.tar.gz' packages.
This patch makes it obvious to the user that the variable needs to be
set.
Signed-off-by: Christian Kellermann <christian.kellermann@solectrix.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit turns mysql into a virtual package, after renaming the
original mysql package to oracle-mysql. This way, all existing packages
that "depends on" or "select" BR2_PACKAGE_MYSQL continue to work with no
modification.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd currently has selinux disabled unconditionally. This prevents
/sys/fs/selinux from being mounted automatically at boot which causes
audit to no longer function. This patch fixes the problem by checking if
libselinux is enabled and enabling support for selinux in systemd if so.
Signed-off-by: Adam Duskett <Adamduskett@outlook.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building host-aespipe fails on
$ cat /etc/debian_version
stretch/sid
at linking stage:
/usr/bin/gcc -L/home/buildroot/br6/output/host/lib -L/home/buildroot/br6/output/host/usr/lib -Wl,-rpath,/home/buildroot/br6/output/host/usr/lib -o aespipe aespipe.o aes-amd64.o md5-amd64.o md5-2x-amd64.o aes-intel64.o sha512.o rmd160.o
/usr/bin/ld: aes-amd64.o: relocation R_X86_64_32S against `.rodata' can not be used when making a shared object; recompile with -fPIC
Fix is also used in Debian:
https://bugs.debian.org/cgi-bin/bugreport.cgi?bug=837393
[Peter: add comment explaining why]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The orangepi board variants use identical post-build and post-image scripts,
so move them up to board/orangepi and add symlinks in the variant
subdirectories, similary to how we handle it for the raspberry pi variants.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Board support package includes the following components:
- mainline u-boot 2016.09.01
- mainline kernel 4.9
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename orangepipc files, configs, and directories:
- oragepipc_defconfig -> orangepi_pc_defconfig
- board/orangepi/orangepipc -> board/orangepi/orangepi-pc
The purpose of the patch is to improve readability before
adding other boards of orangepi family.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that 7.12 has been added and 7.11 is the default version, let's
remove the old 7.9 release.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
7.12 is around, 7.11 has already seen a point release, so it's time to
make 7.11 the default version for gdb.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdb 7.12 was released on October 2016, it's time to include it in
Buildroot, which this commit does.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The only security bug fixed concerns windows so it's not a security bump
for buildroot.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, when there is no syztem device table (permissions or static
devices) defined, then package permissions are not applied, because they
are guarded by the check on the system device tables being non empty.
Fix that by narrowing the guarding condition.
Note that the dependency on host-makedevs was not conditional; we always
build it even if we don't need it. Making it conditional is not
possible, because we don't know all the packages permissions by the time
the fs infra is parsed (packages from br2-external are parsed after it).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udoo neo files are currently placed inside udoo/neo directory.
Place the mx6qdl udoo related files inside udoo/mx6dl for consistency.
[Peter also update path in readme.txt]
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rev0 is very old (E.G. from before Linux was maintained in git), the kernel
prints a scary warning when used:
EXT4-fs warning (device sda): ext4_update_dynamic_rev:746: updating to rev 1
because of new feature flag, running e2fsck is recommended
And rev0 support is broken in u-boot 2016.11:
http://lists.denx.de/pipermail/u-boot/2016-December/275916.html
So default to rev1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update kernel to 4.9 and U-Boot to 2016.09.01.
Signed-off-by: Sergey Matyukevich <geomatsi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As console=ttymxc0 is passed in U-Boot we can use /dev/console to
access the serial console and then BR2_TARGET_GENERIC_GETTY_PORT
can be removed.
Suggested-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libnl3 include path was hardcoded in the configure script,
causing the following gcc warning:
WARNING: unsafe header/library path used in cross-compilation:
'/usr/include/libnl3'
Let's apply an upstream patch that addresses the issue: now
pkg-config is used to detect libnl include path.
Also:
- add optional libnl build dependency;
- enable libnl support only when libnl package is selected.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some patches are not necessary anymore as upstream fixed the issues.
As we are not patching configure.ac anymore, there is no need to
autoreconf the package.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for mx6sx udoo neo boards. For more information about these
boards, please check:
http://www.udoo.org/udoo-neo
The U-Boot and kernel dts patches will be removed when we bump U-Boot
to 2017.01 and kernel to 4.10 version as they have already been sent
upstream.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to kernel 4.9 and remove the wifi dts patch as it is already
part of 4.9.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes an integer buffer overflow in the jpeg loader (details still
embargoed).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch from a PHP Github pull request that fixes the build at -O0
on AArch64.
Signed-off-by: Tatsuyuki Ishi <ishitatsuyuki@gmail.com>
[Thomas: improved patch commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the commit 64544178f1 many packages
broke because they could not find the ext2fs.pc file.
This is perfectly normal, as the DESTDIR and the install target were not
passed anymore to make.
[Peter: remove redundant E2FSPROGS_INSTALL_STAGING_OPTS]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the 1.5-b1 release notes:
Added ARM 64-bit (ARMv8) NEON SIMD implementations of the commonly-used
compression algorithms (including the slow integer forward DCT and h2v2 &
h2v1 downsampling algorithms, which are not accelerated in the 32-bit NEON
implementation.) This speeds up the compression of full-color JPEGs by about
75% on average on a Cavium ThunderX processor and by about 2-2.5x on average
on Cortex-A53 and Cortex-A57 cores.
Add it unconditionally for all aarch64 cores, as neon support is required
for all "standard" ARMv8 implementations. If an ARMv8 implementation w/o
NEON ever shows up, then we will need to add a BR2_AARCH64_CPU_HAS_NEON and
handle it like ARM.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
>From the 1.5-b1 release notes:
Added full SIMD acceleration for PowerPC platforms using AltiVec VMX
(128-bit SIMD) instructions. Although the performance of libjpeg-turbo on
PowerPC was already good, due to the increased number of registers available
to the compiler vs. x86, it was still possible to speed up compression by
about 3-4x and decompression by about 2-2.5x (relative to libjpeg v6b)
through the use of AltiVec instructions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preperation for adding more architectures to the jpeg-turbo simd
handling, introduce a hidden BR2_PACKAGE_JPEG_SIMDS_SUPPORT symbol and use
that to enable simd support and default to jpeg-turbo, instead of open
coding it in both places.
While we are at it, reword the help text to be more useful.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The jpeg-turbo configure script now contains PKG_PROG_PKG_CONFIG, even
though it doesn't so far use pkg-config to detect any dependencies (it does
install a .pc file now though):
checking pkg-config is at least version 0.9.0... ./configure: line 13540: \
/home/peko/source/buildroot/output/host/usr/bin/pkg-config: No such file or directory
Depend on host-pkgconf for consistency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building tar package with acl in static build configuration, we
get definition clash error for 'quote' function.
../gnu/libgnu.a(quotearg.o): In function 'quote':
quotearg.c:(.text+0x12fc): multiple definition of 'quote'
../sysroot/usr/lib/libacl.a(quote.o):/home/test/autobuild/run/instance-1/output/build/acl-2.2.52/libmisc/quote.c:27: first defined here
In acl upstream, this is already fixed by renaming quote and unquote
internal functions. This commit backports upstream patch.
Fixes:
http://autobuild.buildroot.net/results/d64/d64d13745c980d322d3b80c3b324d03eb7f17262
Signed-off-by: Rahul Bedarkar <rahul.bedarkar@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Document LIBFOO_WAF_OPTS, LIBFOO_BUILD_OPTS, LIBFOO_INSTALL_STAGING_OPTS
and LIBFOO_INSTALL_TARGET_OPTS.
Also document LIBFOO_CONF_OPTS which was missing in waf-package
reference.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We correctly set LDCONFIG=true for MAKE_OPTS, but not for the other
steps which don't inherit it, and therefore e2fsprogs tries to use the
host ldconfig during staging and target installation, which causes some
weird error messages at build time (even if they don't abort the build).
Fix that by passing LDCONFIG=true at install time.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments pased to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
Now, we're left with a long list of unsafe paths, somehow hidden within
the code, which can use the same mechanism we use for arguments.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 61cb120 (toolchain/wrapper: extend paranoid check to -isystem), we
introduced a {str,len} tuple to check the various arguments passed to
gcc, to avoid hard-coding an ever-growing, long list of those args
directly in the condition check.
It was made specific to the arguments (the structure member is named
'arg'), but can also be used to store the unsafe paths as well.
Also, that piece is almost un-documented.
Rename the structure member so that it is more generic, and add a bit of
comments to explain the whole of it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For each build step, --notests needs to be passed to waf script
to avoid runing the unit tests.
This allow to remove the patch removing the unit tests from wscript.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script
for each build step. Add the possibility to do so by defining
<pkg>_WAF_OPTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script in
build step. Add the possibility to do so by defining <pkg>_BUILD_OPTS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some waf packages may want to pass additional variables to waf script
in install step. Add the possibility to do so by defining the
following variables:
<pkg>_INSTALL_STAGING_OPTS for the install to staging directory
<pkg>_INSTALL_TARGET_OPTS for the install to target directory
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Bimal Jacob <bimal.jacob@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
[Thomas:
- Move to a submenu "External AngularJS plugins", much like we have an
"External JQuery plugins" menu. Therefore, remove the "select
BR2_PACKAGE_ANGULARJS" from the package, since
angular-websocket/Config.in is now included only if
BR2_PACKAGE_ANGULARJS is defined.
- Add hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix some static linking issues for Xtensa/Blackfin.
Optimize the size for non-threaded static binaries and
fix static C/C++ applications when running on the target.
Fix noMMU madvise declarations.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains the core policy utilities that are required
for basic operation of an SELinux system.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
Tested-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
[Thomas:
- Move the Config.in comment at the top of the Config.in file rather
than between the main option and its sub-options, as this breaks
menuconfig indentation.
- Fix the propagation of the libsemanage dependencies. libsemanage
depends on BR2_PACKAGE_AUDIT_ARCH_SUPPORTS and
BR2_TOOLCHAIN_USES_GLIBC which were not accounted for. Since it
depends on BR2_TOOLCHAIN_USES_GLIBC, then all the gettext related
handling becomes useless and has been removed.
- Rename the prompt of the restorecond sub-option to just
"restorecond".
- Use TARGET_CONFIGURE_OPTS and HOST_CONFIGURE_OPTS instead of
passing LDFLAGS, CC, etc. manually.
- Use make "foreach" function for loops instead of shell "for" loops.
- Rework the explanation of why we're passing DESTDIR at build time.
- Minor formatting tweaks here and there.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
QEMU provides a single system emulator that supports both powerpc64
and powerpc64le with a target called 'ppc64-softmmu', but it provides
a different usermode emulator for each one (with targets
'ppc64le-linux-user' and 'ppc64-linux-user').
Due to this asymmetry it is not possible to support both cases with
the single arch value used in the package file. This patch introduces
an additional value into the package configuration,
HOST_QEMU_SYS_ARCH, so that both cases can be supported.
Fixes commit d2ff457e88
and autobuilder failture
http://autobuild.buildroot.net/results/a2d63e21c3e82c36f4a975e90ed56faba18e97a5
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
[Thomas:
- Rewrap Config.in help text
- Use "depends on" rather than "select" for the audio backend options
- Slightly simplify some of the prompts for the audio backend selection
- Remove MIMIC_INSTALL_STAGING = NO, that's the default
- Use += when assigning MIMIC_DEPENDENCIES
- Remove double quotes when setting --with-audio=.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The symbol to control static compilation was renamed in 2015.02, but missed
when swupdate was added.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The EFL Wayland support was removed with commit [1] since the dependecy
on libdrm was missing. Also it requires OpenGL ES with EGL, Evas DRM
and Evas GLES DRM support [2].
As stated in configure, Evas GLES DRM engine support (gl_drm) depends
on wayland-client to build (wayland-client >= 1.8.0).
So, enable gl_drm only when wayland support is selected.
[1] 4f04be1659
[2] https://www.enlightenment.org/about-wayland
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Pierre Floury <devpfl@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
drm can be used without compositor, just like it was with
the framebuffer for standalone applications
As stated in configure.ac, libdrm support needs libdrm, elput,
libxkbcommon and libgbm.
libgbm is only provided by mesa3d package when OpenGL EGL support is
enabled, so add a direct dependency on mesa3d.
Rework the libxkbcommon dependency since it's now required for
elput and libdrm support.
[1] https://www.enlightenment.org/about-wayland
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Pierre Floury <devpfl@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pass on INSTALL_PROGRAM to configure since starting with version 8.26
when building natively it tries to use the self-built install to
install, and when cross-compiling it expects INSTALL_PROGRAM to point to
a real install, or otherwise fails when recursively trying to expand it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add new GPLv2 license option.
Unfortunately COPYING is GPLv3, so avoid it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since these are detected by the configure script, we should explicit
their dependencies in rpm.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds two patches to the rpm package to fix two separate but
related build issues:
- The first patch fixes a build that occurs when rpm is built after
elfutils, but without binutils. In this case, dwarf.h is present, so
rpm enables the build of a number of additional tools. But one of
them uses bfd.h, provided by binutils, without checking for its
existence. So the first patch fixes that by checking for bfd.h
existence before enabling the tool.
Fixes:
http://autobuild.buildroot.net/results/810/810e24cab65f67d143da29c78c0f89d37a851cd7/build-end.log
- The second patch fixes a build issue that occurs when rpm is built
after both dwarf and binutils. In this case, bfd.h complains because
config.h is not included. That's a weird and silly issue in bfd.h
that the binutils developers don't want to fix, and you have to
define PACKAGE or PACKAGE_VERSION before including bfd.h to use it
outside of binutils.
Fixes:
http://autobuild.buildroot.net/results/362/362502f89631c9ba1d71906527674657ccff01ed/build-end.log
Thanks a lot to James Knight <james.knight@rockwellcollins.com> for the
initial investigation about the first issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
systemd-firstboot is never invoked since systemd's first boot detection
logic checks whether /etc/machine-id exists. Since the file is created
automatically by systemd.mk, systemd will never detect first boot and
therefore the systemd-firstboot.service unit file will never get run.
Additionally, if /etc/machine-id is removed to allow systemd-firstboot
to run, it interactively prompts for the system locale. This makes it
seem unlikely that an embedded system would want to use it.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A number of packages use BR2_ARM_CPU_HAS_NEON to know if the target handles
aarch32 neon instructions, which is only true for ARMv8 cores when they are
running in 32bit mode.
Notice: These cores do support neon-like instructions using a different
encoding in 64bit mode (it is a required part of ARMv8, similar to the FPU).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After commit 3ae07b4746 recently, efibootmgr now selects
BR2_PACKAGE_GETTEXT if the toolchain requires it.
gettext depends on wchar, so this dependency should be propagated as
well.
menuconfig currently complains loudly if you select efibootmgr, with an
error such as:
warning: (... && BR2_PACKAGE_EFIBOOTMGR ... && ) selects
BR2_PACKAGE_GETTEXT which has unmet direct dependencies
(BR2_USE_WCHAR)
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
efivar only makes sense on platforms that support UEFI.
UEFI is only supported by some architectures at the moment, being mostly
employed on platforms such as x86, x86_64 and aarch64. Some other
platforms such as MIPS and PowerPC may have some unofficial UEFI
support. UEFI is also limited to little endian architectures.
efivar was being supported in Buildroot without architecture
restrictions so far, however this has led to the creation of a number of
hacks in the recipes, mostly for architectures that are not supported by
UEFI.
In order to avoid spending more time to debug these failures and
maintaining more hacks for unsupported architectures, efivar can be
restricted to that platforms where it makes sense and where it is more
likely to receive some testing and actual usage.
The existing hacks for the now unsupported architectures are removed,
and the dependency is propagated to efibootmgr as it depends on efivar.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc support was recently added to efivar through a small
compatibility patch.
This commit updates a comment in the efivar recipe to reflect this, as
we no longer have glibc as the only supported C library.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fix kernel reproducible build if a non-C locale is used on the host
system.
When building the Linux kernel, scripts/gen_initramfs_list.sh does 'date
-d"$KBUILD_BUILD_TIMESTAMP" +%s'. In linux.mk, Buildroot sets
KBUILD_BUILD_TIMESTAMP to "$(shell date -d @$(SOURCE_DATE_EPOCH))".
For example, if LANG=fr_FR.UTF-8 is defined in the host system, it does
not work:
- LC_ALL=C date -d"$(LC_ALL=C date)" : ok
- LC_ALL=C date -d"$(LC_ALL=fr_FR.UTF-8 date)" : error
LANG/LC_ALL variables exported in the main Makefiles are not passed in
the $(shell ...) sub-shells.
Signed-off-by: Jean-Baptiste Trédez <jean-baptiste.tredez@basystemes.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A recent change in uClibc-ng removed the MADV_* definitions for
madvise(), but kept the madvise() function itself. This defeats the
logic used in madplay: it checks if madvise() is available, and if it
is, uses it and assumes the MADV_* definitions exist.
This inconsistency has been reported to upstream uClibc-ng, but in the
mean time, we can simply tell madplay to not use madvise(), which is
anyway useless on noMMU platforms.
Fixes:
http://autobuild.buildroot.net/results/3291554ea013e5f4a8f3447e10e664dffa8b131b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 1ffcf364b6 updated cmake to 3.7.0,
which requires selecting the libuv package. At the time, the libuv
package only depended on BR2_TOOLCHAIN_HAS_THREADS. However, later on,
it was changed in master to depend on BR2_TOOLCHAIN_HAS_THREADS_NPTL, a
change which was not taken into account in the cmake 3.7.0 bump that was
merged in the next branch.
Due to this, builds of cmake is attempted on architectures that don't
provide NPTL thread support, causing a build failure. This commit fixes
that by adjusting the dependency.
Fixes:
http://autobuild.buildroot.net/results/16a5e1cbb57c0124537c4f3dc0807ba1eaa975ec/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot references powerpc64 little endian as BR2_powerpc64le and not
BR2_powerpc64el.
Signed-off-by: Erico Nunes <nunes.erico@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: A53/A57 were in fact supported in aarch64 mode in 4.8 (in aarch32
mode only from 4.9), but it doesn't handle --with-abi, and as there is
unlikely to be any aarch64 based legacy projects unwilling to use a newer
GCC version it is simpler to disallow it for all modes.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit f71a621d91, we are using the
SED variable in the main Makefile. However, this variable is only
defined in package/Makefile.in, which gets included only when a
configuration is defined.
This means that, if you do:
$ make menuconfig savedefconfig
without a configuration defined, it fails with:
/bin/bash: /BR2_DEFCONFIG=/d: No such file or directory
Makefile:898: recipe for target 'savedefconfig' failed
make[1]: *** [savedefconfig] Error 127
This issue affects users of the "buildroot-submodule" project, which
does menuconfig+savedefconfig automatically. They worked around this
issue in commit
d12676b608,
but really "make menuconfig savedefconfig" should work out of the box.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has dropped SDL support for ffplay in favor of SDL2.
This results in silently not building ffplay even if it is selected
in Buildroot config.
[Peter: propagate !static dependency from sdl2]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new package currently installs the "rpiboot" utility, which is
needed to access via USB mass storage the built-in eMMC of Raspberry Pi
compute modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tom privately notified that he is not able to support the packages he
originally added in Buildroot, so this commit removes him from the
DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Linaro toolchains are currently only available on ARMv7-A, but can
in fact also be used to generate 32 bits code for ARMv8 platforms. This
commit therefore adjusts their architecture dependency.
Example, a 32 bits ARM build produces a 32 bits busybox binary:
$ file output/target/bin/busybox
output/target/bin/busybox: setuid ELF 32-bit LSB executable, ARM, EABI5 version 1 (SYSV), dynamically linked, interpreter /lib/ld-linux-armhf.so.3, for GNU/Linux 2.6.32, BuildID[sha1]=16a7a70eb9cac08759e52a260478b9c287f59238, stripped
Which was built for Cortex-A72:
$ ./output/host/usr/bin/arm-linux-gnueabihf-readelf -A output/target/bin/busybox
Attribute Section: aeabi
File Attributes
Tag_CPU_name: "Cortex-A72"
Tag_CPU_arch: v8
Tag_CPU_arch_profile: Application
Tag_ARM_ISA_use: Yes
Tag_THUMB_ISA_use: Thumb-2
Tag_FP_arch: FP for ARMv8
Tag_ABI_PCS_wchar_t: 4
Tag_ABI_FP_rounding: Needed
Tag_ABI_FP_denormal: Needed
Tag_ABI_FP_exceptions: Needed
Tag_ABI_FP_number_model: IEEE 754
Tag_ABI_align_needed: 8-byte
Tag_ABI_align_preserved: 8-byte, except leaf SP
Tag_ABI_enum_size: int
Tag_ABI_VFP_args: VFP registers
Tag_CPU_unaligned_access: v6
Tag_MPextension_use: Allowed
Tag_Virtualization_use: TrustZone and Virtualization Extensions
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds the Cortex-A53 CPU to the target architecture variant choice. This
sets the toolchain to use Cortex-A53 as the target. The effect is that
various Cortex-A53 tunings are enabled for the compilation of packages.
Signed-off-by: Matt Flax <flatmax@flatmax.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's currently only one widely supported ABI for ARM64, called lp64,
so we define BR2_GCC_TARGET_ABI to the appropriate value.
Note that there is another ABI for ARM64 being worked on, ilp32, but its
support is not fully upstream in the kernel, so we're not adding support
for it for the moment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The ARMv8 cores have a mandatory FPU unit called FP-ARMv8, so we:
- add a new hidden Config.in option for the availability of this
unit (BR2_ARM_CPU_HAS_FP_ARMV8)
- allow the selection of a possible choice in the "Floating point
strategy", and add two new choices: BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8.
- specify the -mfpu values for BR2_ARM_FPU_FP_ARMV8 and
BR2_ARM_FPU_NEON_FP_ARMV8 cases, when used on ARM 32 bits (-mfpu
doesn't exist on ARM64, instead -mcpu modifiers are used, so they
will be added on a per-core basis).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: drop the FP strategy dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The floating point strategy currently depends on EABI || EABIHF. The
reason was that, wayback when we also supported OABI, we only exposed FP
for EABI or EABIHF, and hide it for OABI, which did not support FP.
It's been a while now that we do not support OABI, but the dependency
stuck all along.
Remove it as it is no longer needed, and is always true.
However, the choice is empty for AArch64, as we still have no entry for
their floating point strategy yet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now the "Target Architecture Variant" choice was not visible on
AArch64. In order to prepare the addition of the 64 bits core to this
choice, this commit adds a "depends on !BR2_ARCH_IS_64" dependency to
all currently supported cores (that are 32 bits only).
Following this commit, the "Target Architecture Variant" choice appears
on AArch64, but is for now empty.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 64 bits ARM processors are capable of running 32 bits ARM code, and
some platforms are indeed using this capability. Due to this, if we were
to keep the separation between Config.in.aarch64 and Config.in.arm, we
would have to duplicate the definition of all 64-bits capable ARM cores
into both files.
Instead of going down this route, let's take the same route as the x86
one: a single Config.in.x86 file, used for both x86 32 bits and x86 64
bits, with the appropriate logic to only show the relevant cores
depending on which architecture is selected.
In order to do this, we:
- Make the "ARM instruction set" choice only visible on ARM 32 bits,
since we currently don't support ARM vs. Thumb on AArch64.
- Add the relevant values for the BR2_ARCH option.
- Add the relevant values for the BR2_ENDIAN option.
- Make the "aapcs-linux" BR2_GCC_TARGET_ABI value only used on ARM 32
bits, since this ABI doesn't mean anything on AArch64.
- Make the BR2_GCC_TARGET_FPU option depends on ARM 32 bits, since
there is no -mfpu option on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current VIM_REMOVE_DOCS hook removes all .txt files from
/usr/share/vim. Unfortunately, this also removes the rgb.txt file,
which is needed at runtime for vim, as reported in bug #9466.
This commit changes VIM_REMOVE_DOCS to remove only
/usr/share/vim/vim*/doc/. Size-wise, it's equivalent because:
- We are no longer removing a few README.txt in other directories,
taking more space.
- We are now removing the /usr/share/vim/vim*/doc/ folder entirely,
which contained a few files not named *.txt
So overall, the size of /usr/share/vim/ before and after this patch is
still 11MB.
Fixes bug #9466.
Reported-by: Mateusz Furdyna <sir.ferdek@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Many (100+) packages supported by buildroot contain old configure
scripts (or build them from old versions of autotools) that are unable
to determine how to link shared libraries on powerpc64 and
powerpc64le. This causes that test to erroneously fail on toolchains
that are not "bi-endian" (which is the case for toolchains built by
buildroot), which causes configure to build static libraries instead
of dynamic ones. Although these builds succeed, they tend to cause
linker failures in binaries later linked against them.
Because affected configure files can be discovered automatically, this
patch introduces a hook (enabled only when building for powerpc64 and
powerpc64le) that uses a script to scan and fix each package.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dev->trans_start was replaced by netif_trans_update helper in kernel
4.7 by commit 860e9538a9482bb84589f7d0718a7e6d0a944d58.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Rebase existing patches
- Use a "menu" instead of "choice" to select Ethernet Powerlink
Drivers since we can now build several kernel modules at once.
- Select the Intel 82573 driver by default.
- Disable library with simulation interface.
- Disable zynq/FPGA (PCIe) interface otherwise the kernelpcp library
is always build.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
[Thomas: minor Config.in tweaks.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The same thing was done in upstream commit 220d7a2f "QtGui module only
needed by Windows", though it was done differently upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit moves the logic that allows to enable the naxsi external
module below the "external modules" comment, which was already used for
the upload and dav-ext modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Nginx built-in support for webdav is missing support for two commands:
PROPFIND and OPTIONS. This commit adds a new package that provides an
external nginx module with improved webdav support.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
[Thomas:
- Remove the BR2_PACKAGE_NGINX_HTTP_DAV_EXT_MODULE sub-option of the
nginx package. The BR2_PACKAGE_NGINX_DAV_EXT option is sufficient.
- Move the nginx.mk code together with another external module being
enabled, nginx-upload.
- Add LICENSE and LICENSE_FILES variables.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
TI provides a set of headers files and libraries useful in developing
firmware for real-time (PRU) cores embedded in some processors e.g.
AM3358. This package stages these files for any packages creating
PRU firmware.
Note: As per [1], use commit v4.0.2 to sync with common TI Linux
versions.
[1] http://e2e.ti.com/support/arm/sitara_arm/f/791/p/552190/2018113#2018113
Signed-off-by: Ash Charles <ash.charles@savoirfairelinux.com>
[Thomas:
- rename BR2_PACKAGE_PRU_EXAMPLES to BR2_PACKAGE_PRU_SOFTWARE_SUPPORT,
since the package directory name should match the Config.in option
for this package
- use select for BR2_PACKAGE_HOST_TI_CGT_PRU, and therefore add the
appropriate "depends on BR2_PACKAGE_HOST_TI_CGT_PRU_ARCH_SUPPORTS".]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Aubio libav support require libavcodec, libavformat, libavutil and
libavresample. Enable libav support only when
BR2_PACKAGE_FFMPEG_AVRESAMPLE is set.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a major update in cjson:
- project site moved from sourceforge to github
- project recommends to use the new cmake buildsystem instead of the
legacy make
- BR2_STATIC_LIBS is now OK (README does not mention issue anymore)
- As include path and library name have changed, tinycbor has to be
updated
- As cjson can now be built as a static library, fix a bug in
json2cbor compilation from tinycbor package
Signed-off-by: Fabrice Fontaine <fabrice.fontaine@orange.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we require a host with an UTF-8 locale as soone as we build a
Buildroot toolchain with support for locales. This means that we do
erquire such a locale when building a toolchain with either uClibc,
glibc or musl.
However, glibc and musl do not require such a locale to be present.
Use the new option to check if an UTF8 locale is needed on the host,
rather than deriving that from toolchain settings.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This can be selected when we need the host to have an UTF-8 locale
(e.g. to build uClibc with support for locales).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The test suite is removed from the package and is already a separate
package in buildroot. All patches are upstream, so remove them.
The UCLIBC_HAS_LFS option is removed upstream.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: remove BR2_UCLIBC_INSTALL_TEST_SUITE option, add it to
Config.in.legacy.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Efl libraries bundle a copy of liblz4 which is also provided by
lz4 Buildroot package. Switch to liblz4 from lz4 package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 5b0dac7ef5, when bumping to
lttng-babeltrace, one patch was kept while it had been applied in the
upstream babeltrace project, causing a build failure.
The patch 0003-fix-uuid-support-detection-on-static-build.patch has been
applied upstream as 2741f55be80ae8af169ae795ea28d2a39c18fa60 in the
master branch, and as d94e7873e9080e820e7742e468736b1317a88de1 in the
maintenance branch that was used to tag 1.5.0.
Fixes:
http://autobuild.buildroot.net/results/585f960eb81b0e15858aadc4aca516af23012b61/
(and about a hundred of similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we bumped CMake from 3.5.2 to 3.6.3 in commit
99ed85d740, CMake uses pkg-config during
its configure step to find available libraries on the host.
If host-pkgconf was not built before host-cmake, everything was working
fine. However, if host-pkgconf was built before, the configure step of
host-cmake was finding pkg-config and used it to find
libraries. Unfortunately, since we were not passing
PKG_CONFIG_PATH/PKG_CONFIG_SYSROOT_DIR, pkg-config was behaving in its
"default" mode, i.e returning results valid when building things for the
target, not for the host. This lead to header paths pointing to the
staging directory being used when building native binary objects,
causing all sort of build failures.
This commit fixes that by passing $(HOST_CONFIGURE_OPTS) to the
environment of host-cmake configure step. This variable contains
HOST_MAKE_ENV, which itself contains the appropriate
PKG_CONFIG_PATH/PKG_CONFIG_SYSROOT_DIR definitions.
At the same time, we drop LDFLAGS="$(HOST_LDFLAGS)" because this
definition is already in $(HOST_CONFIGURE_OPTS).
Fixes:
http://autobuild.buildroot.net/results/4e703ed8c2eb0f914794038b0ef7bd73a67f38ce/
(and 424 similar build failures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This new waf-package infrastructure simplifies writing waf-based
packages. It can be used by our six current such packages, plus a
later-incoming one by Romain.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
[Thomas:
- rename <pkg>_BUNDLED_WAF to <pkg>_NEEDS_EXTERNAL_WAF, which
involves inverting the meaning of the boolean.
- always add the host-python dependency
- add a default value for <pkg>_NEEDS_EXTERNAL_WAF (defaults to NO)
- remove the unneeded <pkg>_MAKE related definitions.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-waf will be used by waf-based packages that do not include it in
their release tarballs, like mpv.
mpv is currently the only case we have, but with the upcoming
waf-package infra, having host-waf available just makes the infra
complete from the onset.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
[Thomas: drop dependency on host-python, it's really a runtime dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change "foo" references to "libfoo" in section that defines variables
explicitly stated to relate to a "libfoo" package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As described at:
4520524ba0
this commit continues a series of updates of ARC tools.
This time we're updating tools to arc-2016.09-rc2.
This change contains a set of minor fixes and updates.
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_STRIP is set to none, a dummy 'true' app is used instead of
strip utility. However, kexec package always requires a real strip
executable as it is used to generate intermediate files during the build
process.
If 'true' is used the build system runs the following command:
true --strip-debug -o purgatory/purgatory.ro purgatory/purgatory.ro.sym
which obviously doesn't do anything useful and the build later fails
with:
bin/bin-to-hex purgatory < purgatory/purgatory.ro > kexec/purgatory.c
/bin/sh: purgatory/purgatory.ro: No such file or directory
kexec/Makefile:7: recipe for target 'kexec/purgatory.c' failed
make[2]: *** [kexec/purgatory.c] Error 1
To resolve it always specify STRIP=$(CROSS_COMPILE)strip, regardless of
buildroot configuration.
[Peter: add a comment explaining why this is done]
Signed-off-by: Marcin Nowakowski <marcin.nowakowski@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also add a sha256 hash since upstream only provides one weak hash.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
My local 'next' branch was not uptodate, so the previous merge was missing
the most recent changes.
Thanks to François Perrad for noticing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 0.12.3 bump forgot to update the download hash and remove the now
upstreamed patch, breaking the build.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 71d9b0c1f0.
Now that -mauto-litpools is in TARGET_ABI when building for xtensa, -O0
builds succeed, so this workaround is no longer needed.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that the madvise defines are disabled for noMMU targets,
architectures with MMU and noMMU support as ARM are failing to compile
in noMMU mode, since the defines are used internally in posix_madvise.c.
Disable compilation for posix_madvise() for noMMU.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When generating the environment image the target endianess should
be taken in account for CRC calculation purposes. For big endian
targets the -b flag should be passed to the mkenvimage tool.
Signed-off-by: Tiago Brusamarello <tiago.brusamarello@datacom.ind.br>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixed CVEs:
- CVE-2016-9387
- CVE-2016-9388
- CVE-2016-9389
- CVE-2016-9390
- CVE-2016-9391
- CVE-2016-9392
- CVE-2016-9393
- CVE-2016-9394
- CVE-2016-9395
- CVE-2016-9396
- CVE-2016-9397
- CVE-2016-9398
- CVE-2016-9399
- CVE-2016-9557
- CVE-2016-9560
Changes to jasper.mk:
- Switched site method to GitHub. 1.900.31 is not released as a tarball
in the official website.
- Autoreconf necessary since there isn't any configure script. We need
to generate it.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 173135df5b ("core: re-enter make if
$(CURDIR) or $(O) are not canonical paths") introduced the CANONICAL_O
variable, defined as:
CANONICAL_O := $(shell mkdir -p $(O) >/dev/null 2>&1)$(realpath $(O))
This duplicates the definition of BASE_DIR, by different means:
BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
So one of these shell calls is redundant. CANONICAL_O is defined first,
so this commit replaces the BASE_DIR derivation with $(CANONICAL_O).
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add an option to QEMU to include the "tools" (configure option:
--enable-tools) in the target. This adds a dependency on pixman, but
that's already present.
Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This toolchain has many problems which are fixed in contemporary gcc
and uClibc-ng. In addition, several hacks are needed to be able to
work with this toolchain. All these hacks are removed as well. Also
the package exceptions for this toolchain are removed.
The BR2_BFIN_INSTALL_FDPIC_SHARED and BR2_BFIN_INSTALL_FLAT_SHARED
options don't get a legacy entry. For the ADI toolchain, there already
is a legacy entry, so it doesn't make sense to add it twice. For other
external toolchains, these options didn't actually work, because they
rely on the specific layout of the ADI toolchain.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently support gcc as old as 4.3. However, Buildroot works
perfectly well with even older gcc versions (tested with 4.1). So we
can add an option BR2_TOOLCHAIN_EXTERNAL_GCC_OLD to support that. The
help text of this option is written with plenty of discouragement.
We use _OLD and not something like _PRE_4_3, because at some point we
will likely remove the 4.3 option and what would then require a name
change.
We don't set any _AT_LEAST option in this case because it's no use -
there is no lower bound on the version in this case. We therefore leave
BR2_TOOLCHAIN_GCC_AT_LEAST empty (the implicit default). When it is
empty, we don't do a version check at all in check_gcc_version
(previously we errored out when it was empty).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MoarVM's Configure.pl script uses pkgconfig to find libraries and
headers, but it uses the one installed in the host machine which is
wrong and can lead to errors of unsafe include paths.
Instead, make it depend on the host-pkgconf package and specify the path
to our pkgconfig binary by using the --pkgconfig configure option.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream kexec-lite now has support for kexec on POWER9 based machines.
Update so this works in simulators and is ready for when real machines
are available.
Signed-off-by: Samuel Mendoza-Jonas <sam@mendozajonas.com>
Acked-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
this commit will init the display as early as possible so the user can
see on screen the boot process.
the displey init will be called after the logging init to provide some
logging of the init.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make may throw an error (but ignored) trace when cleaning up the
rootfs.
The target-finalize rule intends to remove the folder
`$(TARGET_DIR)/usr/share' but this directory may still contain items
(such as the `udhcpc' helper script) and causes the rmdir to fail.
The stderr output is redirected to /dev/null but it returns and error
which is escaped by the leading `-'; but make reports an ignored-error.
See the log below:
$ make
(...)
rm -rf (...)/target/usr/share/gtk-doc
rmdir (...)/target/usr/share
rmdir: failed to remove '(...)/target/usr/share': Directory not empty
make[1]: [Makefile:650: target-finalize] Error 1 (ignored)
find /(...)/target -type f \( -perm /111 -o -name '*.so*' \) -not \( -name 'libpthread*.so*' -o -name 'ld-*.so*' -o -name '*.ko' \) -print0 | xargs -0 (...)/host/usr/bin/arm-buildroot-linux-uclibcgnueabihf-strip --remove-section=.comment --remove-section=.note 2>/dev/null || true
This patch apply the same rule at the instruction immediately after:
* redirecting stderr to /dev/null (already done) and
* executing true if the `rmdir' instruction fails.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems with the change to gcc 6.x based toolchain this
workaround is no longer required. Tested with an arc hs toolchain.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The makedevs package is a fork of the makedevs tool from busybox. It is
part of the Buildroot infrastructure, not something that should be used
on the target. It something like this is needed on the target, upstream
busybox should be used. And if one of the Buildroot-specific features
is needed, then that feature should be upstreamed to busybox.
Besides, there were already two things wrong with the target package:
- it didn't take into account the overlap with busybox (no depends on
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS, no dependency on busybox);
- it didn't take into account the libcap feature.
The target package was introduced more or less accidentally in 81cd9d45
where the intention was to make it more similar to other packages.
So, kill it with fire.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use a space before and after the equal sign when defining the TZ, LANG
and LC_ALL variables, as suggested by the Buildroot coding style.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make sure all files in $TARGET_DIR have a defined modification time
before to generate filesystems.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux kernel include a few information about build environment in its binary.
This feature is incompatible with BR2_REPRODUCIBLE. This patch overload build
information when BR2_REPRODUCIBLE is enabled.
Note that usage of KBUILD_BUILD_TIMESTAMP is not mandatory since Buildroot
use `fakedate'. However, native solution is prefered when upstream
provide one.
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to make tar images reproducible, force files order in tarball.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default invocation to gzip include timestamp in output file. This feature is
incompatible with BR2_REPRODUCIBLE. It is possible to disable it with '-n'.
The environment variable GZIP can hold a set of default options for gzip. So
instead to find all gzip invocation in build process, we just export 'GZIP=-n'.
Notice bzip2, lzma and xz are not impacted by this problem. On the other hand, lzop
does include timestamp and does not provide any way to disable it.
This work was sponsored by `BA Robotic Systems'.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When reproducibility is requested, generate a global SOURCE_DATE_EPOCH
environment variable which contains either the date of Buildroot last
commit if running from a git repository, or the latest release date.
This means that all packages embedding build dates will appear to
have the same build date, so in case of new commit or release, all
packages will appear to have been changed, even though some of them
may not have changed in fact.
The meaning of SOURCE_DATE_EPOCH is specified by the following
specification:
https://reproducible-builds.org/specs/source-date-epoch/
Signed-off-by: Gilles Chanteperdrix <gilles.chanteperdrix@xenomai.org>
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Arago toolchains are no longer maintained and haven't been updated
for a long time.
With this removal, all the legacy toolchain-external support can be
removed as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Synopsys external toolchain for
the ARC architecture.
The legacy implementation is removed.
Note that this toolchain is marked as BROKEN, but 2016.09 seems about
to be released so maybe it will be unbroken soon.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the Sourcery CodeBench external
toolchain for the AMD-64 architecture.
The legacy implementation is removed.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The toolchain-external-package infrastructure is just a copy of the
toolchain-external commands, replacing TOOLCHAIN_EXTERNAL by $(2)
and adding double-dollars everywhere.
toolchain-external itself is converted to a virtual package, but it
is faked a little to make sue the toolchains that haven't been
converted to toolchain-external-package yet keep on working.
The TOOLCHAIN_EXTERNAL_MOVE commands don't have to be redefined
for every toolchain-external-package instance, so that is moved
out into the common part of pkg-toolchain-external.mk.
The musl-compat-headers dependency stays in the toolchain-external
package itself.
The musl ld link is duplicated in the legacy toolchain-external and
the toolchain-external-package, because they have separate hooks.
The handling of TOOLCHAIN_EXTERNAL_BIN deserves some special attention,
because its value will be different for different
toolchain-external-package instances. However, the value only depends
on variables that are set by Kconfig (BR2_TOOLCHAIN_EXTERNAL_PREFIX
and BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD) so it can easily be used in
the generic part. So we don't have to do anything specific for this
variable after all.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Romain Naour <romain.naour@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-toolchain-external.mk will be used later to define the
toolchain-external-package infra. Most of the variable and macro
definitions are shared with the legacy generic-package based
toolchain-external. Move these to pkg-toolchain-external.mk.
pkg-toolchain-external.mk is included implicitly by the include
toolchain/*/*.mk in the top-level Makefile. The order of inclusion is
not defined, but that doesn't matter because none of the variables
defined in pkg-toolchain-external.mk are used in conditions or in
rules in toolchain-external.mk, only in recursively-expanded
variables.
No functional changes at all. The output of 'make -qp' hasn't changed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the toolchain-external logic will be split into separate packages,
the order in which things are defined in toolchain-external.mk no
makes less sense. So reorder things in a more logical fashion.
Also add a few more comments to the different sections.
No functional changes at all. The output of 'make -qp' hasn't changed,
except for the order of arguments in
TOOLCHAIN_EXTERNAL_TOOLCHAIN_WRAPPER_ARGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch, slightly change some comments,
reordered some parts]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The next release of uClibc-ng (1.0.20) will remove the test suite.
Add a separate package before the next release.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
[Thomas: rewrap Config.in help text.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* The first patch is removed because the input-raw plugin is now enabled
in tslib's provided ts.conf
* The second patch added 2 programs to tslib. The whole patch is removed
because:
- ts_finddev is now part of tslib.
- inputattach is part of the 'Linux console project' located
here: https://sourceforge.net/projects/linuxconsole/
Signed-off-by: Martin Kepplinger <martink@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit a167081c5d.
With the applied musl/kernel headers conflict workaround this upstream nacked
patch is no longer necessary.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rick Felker suggested[1] this hack as a workaround to musl libc conflict with
kernel headers:
The problem is linux/libc-compat.h, which should fix this, only works
on glibc, by design. See:
#ifndef _LIBC_COMPAT_H
#define _LIBC_COMPAT_H
/* We have included glibc headers... */
#if defined(__GLIBC__)
/* Coordinate with glibc netinet/in.h header. */
#if defined(_NETINET_IN_H)
If you patch it like this:
-#if defined(__GLIBC__)
+#if 1
then it should mostly work but it's still all a big hack. I think
that's what distros are doing. The problem is that the same header is
trying to do two different things:
1. Provide extra linux-kernel-API stuff that's not in the
libc/userspace headers.
2. Provide definitions of the standard types and constants for uClibc
and klibc, which don't have complete libc headers and rely on the
kernel headers for definitions.
These two uses really should be separated out into separate headers so
that the latter only get included explicitly by uClibc and klibc and
otherwise remain completely unused. But that would require coordinated
changes/upgrades which are unlikely to happen. :(
Upstream musl still evaluates[2][3] a permanent solution.
With this in place we can revert (at least) commits a167081c5d (bridge-utils:
fix build with musl) and e74d4fc493 (norm: add patch to fix musl build).
[1] http://www.openwall.com/lists/musl/2015/10/08/2
[2] http://git.musl-libc.org/cgit/musl/commit/?id=04983f2272382af92eb8f8838964ff944fbb8258
[3] http://www.openwall.com/lists/musl/2016/11/09/2
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previous version patches are still needed, but they have been
upgraded to apply cleanly.
This also reverts aa9fde1c45, as that
patch is already on upstream.
Signed-off-by: Alvaro Gamez <alvaro.gamez@hazent.com>
[Thomas: fix the AR/RANLIB problem by adding another patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
currently some buildroot targets fails (list-defconfigs,
graph-build, etc), if there is an issue with configuration.
For example, enabling uboot package without providing custom
version name results in failing of various targets.
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: as suggested by Arnout, added printvars and savedefconfig to
nobuild_targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
netsniff-ng allows build with musl since version 0.5.8. With libnet
now being able to build with musl, let's enable musl for netsniff-ng
as well.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: update Config.in comment.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to a patch taken from upstream
(ffd7fab744),
we can enable the libnet package on musl toolchain.
Adjusted the file paths manually so the patch applies to the packaged
libnet sources.
Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
[Thomas: allow the package to be selected with the musl C library.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to the common genimage scripts, the uImage.imx23-olinuxino
file no longer exists.
Instead of updating the section, let's simply remove it as the more
standard method of using sdcard.img is already explained.
This also makes the readme more consistent with the other i.MX readme files.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the conversion to the common genimage scripts the generated file list
is a bit different, so adjust it accordingly.
Signed-off-by: Fabio Estevam <fabio.estevam@nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit we update ARC defconfigs with the following:
- "snps_axs101_defconfig", "snps_axs103_defconfig" and
"snps_hs38_smp_vdk_defconfig":
- bump linux kernel version to 4.8.6
- set up host linux headers to 4.8
Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Saves a little space and network bandwidth.
While at it, use PATCHELF_VERSION for PATCHELF_SITE.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The snowball_defconfig has been removed one year ago in commit
b3fa8e24de ("configs: remove
calao_snowball_defconfig"), and it's no longer possible to buy
Snowball boards. Therefore, there is no reason to keep the
snowball-related packages in our tree.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TOOLCHAIN_EXTERNAL_PREFIX variable is already qstripped and
stored in the TOOLCHAIN_EXTERNAL_PREFIX variable in
toolchain-external.mk, so use this variable everywhere.
This will be useful for a later patch that makes the derivation of
TOOLCHAIN_EXTERNAL_PREFIX a little more complex.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Arnout: split off into separate patch]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
allow usage of amcodec if kodi is built and libamcodec is selected
Signed-off-by: Dagg Stompler <daggs@gmx.com>
[Thomas: fix KODI_INCLUDES definition in RPi case, fix indentation.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A short list of new features:
- progress interface as general way to signalize the update
status outside of the process.
- support encrypted artifacts (encryption via simmetric keys)
- host verification for swu images (-c option)
- configuration file to configure the update process
- HAwkbit backend: API extended, support for configData messages
- Hawkbit backend: supports SSL certificates
- remote handler : general interface to connect external
installers.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for 256 colors is enabled in xterm and ncurses, but it was
forgotten for screen.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to have a better hierarchy for the genimage scripts used by
NXP mx25, mx51, mx53, mx6, mx7 SoCs, let's place them inside the
board/freescale/common/imx/ directory.
This helps in creating a more natural separation between the mxs scripts
that are placed inside the board/freescale/common/mxs/ directory.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Source /etc/default/telnet to make it possible to override the telnetd
arguments. For example a user may want to set an alternative port.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a webrtc GStreamer plugin that will
have to select the webrtc-audio-processing package (and therefore
inherits its dependencies), this commits adds a
BR2_PACKAGE_WEBRTC_AUDIO_PROCESSING_ARCH_SUPPORTS blind option to avoid
duplicating the architecture dependencies of this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's new for 1.10.0, add an explicit option for the fdkaac plugin.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
[Thomas: add missing dependencies for the fdk-aac select, as noticed
by Baruch Siach.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the addition of a fdk-aac GStreamer plugin that will
have to select the fdk-aac package (and therefore inherits its
dependencies), this commits adds a BR2_PACKAGE_FDK_AAC_ARCH_SUPPORTS
blind option to avoid duplicating the architecture dependencies of
this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's a new feature for 1.10.0+, however it doesn't have an
enable/disable configure switch so just handle the dependency.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a standard genimage script for the MXS processors (MX23 and MX28).
Based on the common scripts for the other imx devices:
board/freescale/common/genimage.cfg.template
board/freescale/common/post-image.sh
This makes it easier to add new MX23/MX28 boards configurations into
Buildroot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't use the default implicit rules that are added by make, so
they just slow down the Makefile processing. The default implicit
rules can be removed by defining an empty .SUFFIXES: target.
This speeds up the start of the build on my machine from 5.6s to
4.9s.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ustream-ssl has support for polarssl and cyassl
but since polarssl is made obsolete by mbedtls and cyassl
is not present in buildroot, we have not added support for it.
Signed-off-by: Rahul Bedarkar <Rahul.Bedarkar@imgtec.com>
Signed-off-by: Rahul Jain <Rahul.Jain@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- 0002 patch tweaked. There is a hunk that has been removed upstream by
this commit:
082210c7a8
- Patches 0004, 0005 and 0006 were backported from upstream and now they
are included in this release, so drop them.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
if test "${mesontimer}"="0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}"="1"; then fdt rm /timer; fi
@@ -46,5 +173,4 @@ if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /
if test "${nographics}"="1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}"="1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
For details about the medium image layout, see the definition in
board/udoo/neo/genimage.cfg.
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
