- Fix CVE-2020-13645: In GNOME glib-networking through 2.64.2, the
implementation of GTlsClientConnection skips hostname verification of
the server's TLS certificate if the application fails to specify the
expected server identity. This is in contrast to its intended
documented behavior, to fail the certificate verification.
Applications that fail to provide the server identity, including Balsa
before 2.5.11 and 2.6.x before 2.6.1, accept a TLS certificate if the
certificate is valid for any host.
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: bump to 2.62.4 rather than 2.64.3]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8f3d361f5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LIBUSB_1_0_SONAME is detected since version 0.1.6 and
b6f5a2fe12
The detection mechanism is based on sed, here are the more relevant
parts:
shrext_regexp=`echo "$shrext_cmds" | sed 's/\./\\\\./'`
[...]
[AS_VAR_SET([ac_Lib_SONAME], [`ldd conftest$ac_exeext | grep 'lib[$2]'$shrext_regexp | sed 's/^@<:@ \t@:>@*lib[$2]'$shrext_regexp'/lib[$2]'$shrext_regexp'/;s/@<:@ \t@:>@.*$//'`])])
However, this mechanism is broken with sed 4.7 and will return the
following 'silent' error:
checking for SONAME of libusb-1.0... sed: -e expression #1, char 40: Invalid back reference
unknown
Moreover, it also raises the following build failure on one of the
autobuilder because an empty line is added to LIBUSB_1_0_SONAME:
checking for SONAME of libusb-1.0... checking
libusb-1.0.so.0
checking for GNU extensions of errno.h... no
configure: WARNING: cache variable au_cv_lib_soname_LIBUSB_1_0 contains a newline
checking that generated files are newer than configure... done
configure: creating ./config.status
config.status: creating libusb.pc
config.status: creating libusb-config
config.status: creating Makefile
config.status: creating libusb/Makefile
config.status: creating examples/Makefile
config.status: creating config.h
config.status: executing depfiles commands
config.status: executing libtool commands
config.status: executing default commands
configure: WARNING: unrecognized options: --disable-gtk-doc, --disable-gtk-doc-html, --disable-doc, --disable-docs, --disable-documentation, --with-xmlto, --with-fop, --enable-ipv6, --disable-nls
configure: WARNING: cache variable au_cv_lib_soname_LIBUSB_1_0 contains a newline
[7m>>> libusb-compat 0.1.7 Building[27m
PATH="/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/bin:/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/host/sbin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1/usr/local/bin:/accts/mlweber1/bin:/accts/mlweber1/libexec/git-core:/accts/mlweber1/usr/bin:/accts/mlweber1
/usr/local/bin:/usr/lib64/qt-3.3/bin:/usr/local/bin:/usr/bin:/usr/local/sbin:/usr/sbin" /usr/bin/make -j8 -C /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/libusb-compat-0.1.7/
make[1]: Entering directory `/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/build/libusb-compat-0.1.7'
Makefile:284: *** missing separator. Stop.
We could patch patch m4/au_check_lib_soname.m4 to fix the mechanism
however this is difficult without reproducing the autobuilder failure
and upstream seems dead so just set LIBUSB_1_0_SONAME
Fixes:
- http://autobuild.buildroot.org/results/12d771d85d30594929cfe3e1c783fc70857e7f5f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: extract the actual SONAME from the library]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3a9261ddd9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the linux-headers are configured to use the same source as the
kernel (BR2_KERNEL_HEADERS_AS_KERNEL), and the kernel is configured
to be one of the two CIP versions (BR2_LINUX_KERNEL_LATEST_CIP_VERSION
or BR2_LINUX_KERNEL_LATEST_CIP_RT_VERSION), the build fails if the
kernel sources are not already downloaded:
$ cat defconfig
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_LATEST_CIP_VERSION=y
$ make defconfig BR2_DEFCONFIG=$pwd)/defconfig
$ make linux-headers-source
>>> linux-headers 4.19.118-cip25 Downloading
--2020-05-13 19:28:44-- https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.19.118-cip25.tar.xz
Resolving cdn.kernel.org (cdn.kernel.org)... 2a04:4e42:1d::432, 151.101.121.176
Connecting to cdn.kernel.org (cdn.kernel.org)|2a04:4e42:1d::432|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2020-05-13 19:28:45 ERROR 404: Not Found.
make[1]: *** [package/pkg-generic.mk:171: /home/ymorin/dev/buildroot/O/build/linux-headers-4.19.118-cip25/.stamp_downloaded] Error 1
make: *** [Makefile:23: _all] Error 2
We fix that by adding yet another duplication of information out of
the linux.mk, to use the CIP-specific git tree where to get the
archives as snapshots.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d25a5724c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current script (S51sysrepo-plugind) is not able to stop the daemon.
Possible options to fix the problem:
A) By adding the "-m -p $PIDFILE" option to start the pid file will be
created but it will not contain the correct PID used by the daemon.
This is obviously because the daemon forks.
B) By not starting the daemon in background (sysrepo-plugind -d) and
let do it by start-stop-daemon with "-b" option. But then the log
messages of the daemon will not longer ends in the syslog but to stderr.
C) Start the daemon without a pidfile and stop the daemon with the
"-x" option.
The only valid option is C to fix that.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr: introduce EXECUTABLE]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1a14a838ea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-11739: An issue was discovered in Xen through 4.13.x,
allowing guest OS users to cause a denial of service or possibly gain
privileges because of missing memory barriers in read-write unlock
paths. The read-write unlock paths don't contain a memory barrier. On
Arm, this means a processor is allowed to re-order the memory access
with the preceding ones. In other words, the unlock may be seen by
another processor before all the memory accesses within the "critical"
section. As a consequence, it may be possible to have a writer executing
a critical section at the same time as readers or another writer. In
other words, many of the assumptions (e.g., a variable cannot be
modified after a check) in the critical sections are not safe anymore.
The read-write locks are used in hypercalls (such as grant-table ones),
so a malicious guest could exploit the race. For instance, there is a
small window where Xen can leak memory if XENMAPSPACE_grant_table is
used concurrently. A malicious guest may be able to leak memory, or
cause a hypervisor crash resulting in a Denial of Service (DoS).
Information leak and privilege escalation cannot be excluded.
- Fix CVE-2020-11740: An issue was discovered in xenoprof in Xen through
4.13.x, allowing guest OS users (without active profiling) to obtain
sensitive information about other guests. Unprivileged guests can
request to map xenoprof buffers, even if profiling has not been enabled
for those guests. These buffers were not scrubbed.
- Fix CVE-2020-11741: An issue was discovered in xenoprof in Xen through
4.13.x, allowing guest OS users (with active profiling) to obtain
sensitive information about other guests, cause a denial of service, or
possibly gain privileges. For guests for which "active" profiling was
enabled by the administrator, the xenoprof code uses the standard Xen
shared ring structure. Unfortunately, this code did not treat the guest
as a potential adversary: it trusts the guest not to modify buffer size
information or modify head / tail pointers in unexpected ways. This can
crash the host (DoS). Privilege escalation cannot be ruled out.
- Fix CVE-2020-11742: An issue was discovered in Xen through 4.13.x,
allowing guest OS users to cause a denial of service because of bad
continuation handling in GNTTABOP_copy. Grant table operations are
expected to return 0 for success, and a negative number for errors. The
fix for CVE-2017-12135 introduced a path through grant copy handling
where success may be returned to the caller without any action taken. In
particular, the status fields of individual operations are left
uninitialised, and may result in errant behaviour in the caller of
GNTTABOP_copy. A buggy or malicious guest can construct its grant table
in such a way that, when a backend domain tries to copy a grant, it hits
the incorrect exit path. This returns success to the caller without
doing anything, which may cause crashes or other incorrect behaviour.
- Fix CVE-2020-11743: An issue was discovered in Xen through 4.13.x,
allowing guest OS users to cause a denial of service because of a bad
error path in GNTTABOP_map_grant. Grant table operations are expected to
return 0 for success, and a negative number for errors. Some misplaced
brackets cause one error path to return 1 instead of a negative value.
The grant table code in Linux treats this condition as success, and
proceeds with incorrectly initialised state. A buggy or malicious guest
can construct its grant table in such a way that, when a backend domain
tries to map a grant, it hits the incorrect error path. This will crash
a Linux based dom0 or backend domain.
https://xenproject.org/downloads/xen-project-archives/xen-project-4-13-series/xen-project-4-13-1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0caabc8cda)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit [1] "licensing info is only valid for v1.4" fixed the legal-info
issues when a custom ATF tarball or a version from git is used.
But we need to ignore licencing for a used defined official ATF version.
Althougt the ATF version are licensed under BSD-3-Clause, the license
file can be updated between version (for example between v1.4 and v2.0).
Ignore the licencing check if the user provide a custom official version.
[1] d1a61703f7
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: use positive logic with the _LATEST option]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 36c0a0c656)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that Freescale has been wholly swallowed into NXP, the public-facing
git repositories that were hosting those two packages are no longer
available.
Fortunately, they had been mirrored on Code Aurora forge (a Linux
Foundation project, so relatively stable and trustworthy), which has the
tags we need, and that generates the exact same archives.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3bfe849189)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Switch site to an active fork
- Send patch upstream
- Update indentation in hash file (two spaces)
- Fix the following CVEs:
- CVE-2018-14054: A double free exists in the MP4StringProperty class
in mp4property.cpp in MP4v2 2.0.0. A dangling pointer is freed again
in the destructor once an exception is triggered.
Fixed by
f09cceeee5
- CVE-2018-14325: In MP4v2 2.0.0, there is an integer underflow (with
resultant memory corruption) when parsing MP4Atom in mp4atom.cpp.
Fixed by
e475013c6e
- CVE-2018-14326: In MP4v2 2.0.0, there is an integer overflow (with
resultant memory corruption) when resizing MP4Array for the ftyp
atom in mp4array.h.
Fixed by
70d823ccd8
- CVE-2018-14379: MP4Atom::factory in mp4atom.cpp in MP4v2 2.0.0
incorrectly uses the MP4ItemAtom data type in a certain case where
MP4DataAtom is required, which allows remote attackers to cause a
denial of service (memory corruption) or possibly have unspecified
other impact via a crafted MP4 file, because access to the data
structure has different expectations about layout as a result of
this type confusion.
Fixed by
73f38b4296
- CVE-2018-14403: MP4NameFirstMatches in mp4util.cpp in MP4v2 2.0.0
mishandles substrings of atom names, leading to use of an
inappropriate data type for associated atoms. The resulting type
confusion can cause out-of-bounds memory access.
Fixed by
51cb6b36f6
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0a860f21e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default iamge size is 32MiB, which is quite low by today's standards.
Besides, the AArch64 kernels are relatively big, which leaves not much
room, if at all, for users to experiment on the default image.
Increase the vfat size to a more reasonable 64MiB.
Note that users who derive an in-tree defconfig for their own case will
allways hit any arbitarary size we put here, so they will anyway have to
also derive this template for their own use-cases.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7d804aba66)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
snappy is not a mandatory dependency to build leveldb. Back when it
was introduced in Buildroot, as of version 1.18, the build logic
already made snappy an optional dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 39ef24f8bb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Libdrm freedreno depends on BR2_arm || BR2_aarch64 || BR2_aarch64_be
as such we need to propagate those dependencies to mesa's gallium
freedreno driver.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 00c1a8c34f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original git server on git.xiph.org died, and the Xiph project has
now moved on to host their repositories on gitlab.comn instead.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 97551eb176)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-13164: In Wireshark 3.2.0 to 3.2.3, 3.0.0 to 3.0.10, and
2.6.0 to 2.6.16, the NFS dissector could crash. This was addressed in
epan/dissectors/packet-nfs.c by preventing excessive recursion, such as
for a cycle in the directory graph on a filesystem.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 39bfd50410)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the migration from alioth to gitlab, the git repository for ltrace
was not migrated. There is a repository on gitlab.com, owned by the debian
maintainer, but that repository does not contain the sha1 we know of:
https://gitlab.com/cespedes/ltrace
s.b.o. is the only known location so far to host the archive, so switch
to it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9827283641)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- (9.11.18) DNS rebinding protection was ineffective when BIND 9 is
configured as a forwarding DNS server. Found and responsibly reported by
Tobias Klein. [GL #1574]
- (9.11.19) To prevent exhaustion of server resources by a maliciously
configured domain, the number of recursive queries that can be triggered
by a request before aborting recursion has been further limited. Root and
top-level domain servers are no longer exempt from the
max-recursion-queries limit. Fetches for missing name server address
records are limited to 4 for any domain. This issue was disclosed in
CVE-2020-8616. [GL #1388]
- (9.11.19) Replaying a TSIG BADTIME response as a request could trigger an
assertion failure. This was disclosed in CVE-2020-8617. [GL #1703]
Also update the COPYRIGHT hash for a change of copyright year and adjust the
spacing for the new agreements.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 89a5d21627)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When selecting "console" for the automatic getty, the buildroot logic
would collide with systemd's internal console detection logic, resulting
in two getty being started on the console.
This commit fixes that by doing nothing when "console" is selected and
letting systemd-getty-generator deal with starting the proper getty.
Note that if something other than the console is selected
* Things will work properly, even if the selected terminal is also the
console
* A getty will still be started on the console.
This is what systemd has been doing on buildroot since the beginning. it
could be disabled but I left it for backward compatibility
Fixes: #12361
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 26c32d933e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-10957: In Dovecot before 2.3.10.1, unauthenticated
sending of malformed parameters to a NOOP command causes a NULL
Pointer Dereference and crash in submission-login, submission, or
lmtp.
- Fix CVE-2020-10958: In Dovecot before 2.3.10.1, a crafted SMTP/LMTP
message triggers an unauthenticated use-after-free bug in
submission-login, submission, or lmtp, and can lead to a crash under
circumstances involving many newlines after a command.
- Fix CVE-2020-10967: In Dovecot before 2.3.10.1, remote
unauthenticated attackers can crash the lmtp or submission process by
sending mail with an empty localpart.
- Drop first patch (already in version) and so autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 03fbb81b8b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I added this package while working for Grandcentrix but
am willing to maintain it further.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6cff754157)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add two spaces in hash file.
Remove patch 0002 as it has been applied upstream.
Release notes:
https://mariadb.com/kb/en/library/mariadb-10323-release-notes/
Changelog:
https://mariadb.com/kb/en/library/mariadb-10323-changelog/
Fixes the following security vulnerabilities:
CVE-2020-2752 - Vulnerability in the MySQL Client product of Oracle MySQL
(component: C API). Supported versions that are affected are 5.6.47 and
prior, 5.7.27 and prior and 8.0.17 and prior. Difficult to exploit
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Client. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Client.
CVE-2020-2812 - Vulnerability in the MySQL Server product of Oracle MySQL
(component: Server: Stored Procedure). Supported versions that are affected
are 5.6.47 and prior, 5.7.29 and prior and 8.0.19 and prior. Easily
exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful attacks
of this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2020-2814 - Vulnerability in the MySQL Server product of Oracle MySQL
(component: InnoDB). Supported versions that are affected are 5.6.47 and
prior, 5.7.28 and prior and 8.0.18 and prior. Easily exploitable
vulnerability allows high privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2020-2760 - Vulnerability in the MySQL Server product of Oracle MySQL
(component: InnoDB). Supported versions that are affected are 5.7.29 and
prior and 8.0.19 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server as well as unauthorized update, insert or
delete access to some of MySQL Server accessible data.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 285986ae59)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Switch site to github
- Drop patches (already in version)
- Fix the following CVEs:
- CVE-2020-13114: Time consumption DoS when parsing canon array
markers
- CVE-2020-13113: Potential use of uninitialized memory
- CVE-2020-13112: Various buffer overread fixes due to integer
overflows in maker notes
- CVE-2020-0093: read overflow
- CVE-2020-12767: fixed division by zero
https://github.com/libexif/libexif/releases/tag/libexif-0_6_22-release
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ca0547ffea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current host-bison installation is not relocatable, so if you
generate the SDK, and install it in a different location, bison will
no longer work with failures such as:
bison: /home/user/buildroot/output/host/share/bison/m4sugar/m4sugar.m4: cannot open: No such file or directory
This particular issue is already resolved upstream by the addition of
"relocatable" support, which we enable using --enable-relocatable.
Once this issue is fixed, a second one pops up: the path to the m4
program itself is also hardcoded. So we add a patch to fix that as
well. The patch has been submitted upstream, which have requested for
further refinements not applicable to the Buildroot context; in the
meantime, we carry that patch.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12656
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: add reference to the upstream submission]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 78e7807112)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security fixes:
CVE-2020-12243: Fixed slapd to limit depth of nested filters
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9e9c242fb7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is now forcefully selected by
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS when the kernel is in
charge of building DTBs (BR2_LINUX_KERNEL_DTS_SUPPORT=y). So enabling
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT is no longer needed in the 64-bit
defconfigs for Raspberry Pi 3 and 4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 562e602442)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTB_OVERLAYS is enabled, and the
DTBs are built by Linux (i.e BR2_LINUX_KERNEL_DTS_SUPPORT is enabled),
these DTBs should be built with the -@ Device Tree compiler option, so
that they can be used together with DTB overlays. So let's select
BR2_LINUX_KERNEL_DTB_OVERLAY_SUPPORT in this situation.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12831
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9fd1d4fec1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comment explaining the autoreconf says that we are building from a git
clone - but we are not, currently. However, the reconf is still needed due
to patches modifying ac files.
This commit corrects the comment.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
[yann.morin.1998@free.fr: also mention acincludes.m4]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7dccd3b248)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to latest upstream commit as it fixes a huge number of CVEs. Some
of them can't be linked to a given commit (e.g.
https://github.com/ckolivas/lrzip/issues/67). Moreover, upstream does
not plan to tag a new release any time soon:
https://github.com/ckolivas/lrzip/issues/99
- Fix CVE-2017-8842: The bufRead::get() function in libzpaq/libzpaq.h in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (divide-by-zero error and application crash) via a crafted
archive.
- Fix CVE-2017-8843: The join_pthread function in stream.c in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (NULL pointer dereference and application crash) via a
crafted archive.
- Fix CVE-2017-8844: The read_1g function in stream.c in liblrzip.so in
lrzip 0.631 allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted archive.
- Fix CVE-2017-8845: The lzo1x_decompress function in lzo1x_d.ch in LZO
2.08, as used in lrzip 0.631, allows remote attackers to cause a
denial of service (invalid memory read and application crash) via a
crafted archive.
- Fix CVE-2017-8846: The read_stream function in stream.c in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (use-after-free and application crash) via a crafted
archive.
- Fix CVE-2017-8847: The bufRead::get() function in libzpaq/libzpaq.h in
liblrzip.so in lrzip 0.631 allows remote attackers to cause a denial
of service (NULL pointer dereference and application crash) via a
crafted archive.
- Fix CVE-2017-9928: In lrzip 0.631, a stack buffer overflow was found
in the function get_fileinfo in lrzip.c:979, which allows attackers to
cause a denial of service via a crafted file.
- Fix CVE-2017-9929: In lrzip 0.631, a stack buffer overflow was found
in the function get_fileinfo in lrzip.c:1074, which allows attackers
to cause a denial of service via a crafted file.
- Fix CVE-2018-5747: In Long Range Zip (aka lrzip) 0.631, there is a
use-after-free in the ucompthread function (stream.c). Remote
attackers could leverage this vulnerability to cause a denial of
service via a crafted lrz file.
- Fix CVE-2018-11496: In Long Range Zip (aka lrzip) 0.631, there is a
use-after-free in read_stream in stream.c, because decompress_file in
lrzip.c lacks certain size validation.
Also:
- update indentation of hash file (two spaces)
- drop patch (already in version)
- manage host-nasm dependency which is enabled by default and has been
fixed by:
9f16f65705
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0f783ba66e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mesa chooses the first platform specified in -Dplatforms as the default
EGL native platform. [0]
Configure Options
-D platforms=...
List the platforms (window systems) to support. Its argument is
a comma separated string such as -D platforms=x11,drm. It
decides the platforms a driver may support. The first listed
platform is also used by the main library to decide the native
platform.
This has the effect of breaking EGL applications running on X11 and
possibly Wayland when the first platform specified isn't x11 or wayland,
and EGL_PLATFORM isn't set.
Reorder the specified platforms to use x11, wayland, and drm before
surfaceless, as this is the order chosen by other common distributions,
such as Arch Linux [1], Debian [2], and Fedora [3].
Users preferring drm or surfaceless over x11 or wayland likely know how
to override the native EGL platform, and likely have x11 and wayland
disabled anyway.
[0] https://www.mesa3d.org/egl.html
[1] https://git.archlinux.org/svntogit/packages.git/tree/trunk/PKGBUILD?h=packages/mesa#n45
[2] fb8c1efb57/debian/rules (L38)
[3] https://src.fedoraproject.org/rpms/mesa/blob/master/f/mesa.spec#_337
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8e79f54323)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* (2.24.2) With a crafted URL that contains a newline in it, the credential
helper machinery can be fooled to give credential information for a wrong
host. The attack has been made impossible by forbidding a newline
character in any value passed via the credential protocol.
* (2.24.3) With a crafted URL that contains a newline or empty host, or
lacks a scheme, the credential helper machinery can be fooled into
providing credential information that is not appropriate for the protocol
in use and host being contacted.
Unlike the vulnerability CVE-2020-5260 fixed in v2.17.4, the
credentials are not for a host of the attacker's choosing; instead,
they are for some unspecified host (based on how the configured
credential helper handles an absent "host" parameter).
The attack has been made impossible by refusing to work with
under-specified credential patterns.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa have added new relocation types R_XTENSA_[NP]DIFF{8,16,32} with
the same properties as the existing types R_XTENSA_DIFF{8,16,32}.
Add them to the list of ignored relocation types.
This fixes the following error when invoking elf2flt on xtensa binaries
built with the recent binutils:
ERROR: reloc type R_XTENSA_PDIFF32 unsupported in this context
Reported-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c99a3950d8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libopcodes was installed in staging/ in commit 6a508d9361 (binutils:
Also install libopcodes in staging), but was not installed in target/
Starting with linux-5.6, perf (linux-tools) will link to libopcodes when
it is present. Since it is available in staging, the build succeeds.
However, libopcodes missing in target, perf fails at runtime:
perf: ...libopcodes-2.33.1.so: cannot open shared object file
Install libopcodes to target as well.
Signed-off-by: Lecopzer Chen <lecopzer@gmail.com>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit afceb76e43)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
CVE-2020-10029: Trigonometric functions on x86 targets suffered from stack
corruption when they were passed a pseudo-zero argument. Reported by Guido
Vranken / ForAllSecure Mayhem.
CVE-2020-1751: A defect in the PowerPC backtrace function could cause an
out-of-bounds write when executed in a signal frame context.
CVE-2020-1752: A use-after-free vulnerability in the glob function when
expanding ~user has been fixed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6488684e2b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
- Improve mitigation for CVE-2019-14271 for some nscd configuration.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 21e4b43544)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-markdown2 through 2.3.8 allows XSS because element names are
mishandled unless a \w+ match succeeds. For example, an attack might use
elementname@ or elementname- with an onclick attribute.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 544007dcc4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To match the docker-engine version.
./support/testing/run-tests tests.package.test_docker_compose.TestDockerCompose
09:54:39 TestDockerCompose Starting
09:54:40 TestDockerCompose Building
10:45:33 TestDockerCompose Building done
10:46:30 TestDockerCompose Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 3121.828s
OK
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0a0e3017d7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PAHO_HIGH_PERFORMANCE to disable free redefiniton as suggested by
upstream in https://github.com/eclipse/paho.mqtt.c/issues/846.
This will avoid the following build failure on musl:
/tmp/instance-1/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/sched.h:80:17: error: expected declaration specifiers or '...' before string constant
void free(void *);
^
/tmp/instance-1/output-1/host/x86_64-buildroot-linux-musl/sysroot/usr/include/sched.h:80:17: error: expected declaration specifiers or '...' before numeric constant
void free(void *);
^
[ 35%] Building C object src/CMakeFiles/common_obj.dir/Base64.c.o
[ 36%] Building C object src/CMakeFiles/common_obj.dir/SHA1.c.o
make[3]: *** [src/CMakeFiles/common_obj.dir/build.make:284: src/CMakeFiles/common_obj.dir/MQTTReasonCodes.c.o] Error 1
Fixes:
- http://autobuild.buildroot.org/results//fbe57a1602fed331ddff3ff3560dce02573816ff
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e446f5ac02)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libvncclient/cursor.c in LibVNCServer through 0.9.12 has a
HandleCursorShape integer overflow and heap-based buffer overflow via a
large height or width value. NOTE: this may overlap CVE-2019-15690.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 705adbaf9a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch to fix squashfs-tools build failures because
of missing external declaration for fwriter_buffer and
bwriter_buffer.
Fixes:
- http://autobuild.buildroot.net/results/6789b668898245926e0a3a3e7caf823dff515d71
/usr/bin/ld: read_fs.o:(.bss+0x0): multiple definition of `fwriter_buffer'; mksquashfs.o:(.bss+0x400c90): first defined here
/usr/bin/ld: read_fs.o:(.bss+0x8): multiple definition of `bwriter_buffer'; mksquashfs.o:(.bss+0x400c98): first defined here
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8d7b714027)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add two upstream patches fixing input_event time related
compile failures.
Fixes:
- http://autobuild.buildroot.net/results/3883a948e30cfd235cfca1fb8646fe8032f5e18d
keytable.c: In function 'test_event':
keytable.c:1536:11: error: 'struct input_event' has no member named 'time'; did you mean 'type'?
ev[i].time.tv_sec, ev[i].time.tv_usec,
^~~~
type
keytable.c:1536:30: error: 'struct input_event' has no member named 'time'; did you mean 'type'?
ev[i].time.tv_sec, ev[i].time.tv_usec,
^~~~
type
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit cd27ee0a58)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cvs is an old package, and it shows:
- CVS is licensed under GPL-1.0+ as stated in README (referenced in source
code) and COPYING files;
- COPYING.LIB also give the terms of LGPL-2.0+, and is referenced by a
few files, like lib/strnlen1.c, mostly vampirised rom older versions
of the GNU C library (glibc);
- additionally, the glob implementation was also grabbed from a more
recent (but still old) glibc version, and is LGPL-2.1+, but there is
no license file associated with it, so we use the header instead.
Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- LGPL-2.0+ is used, reference at least one file
- LGPL-2.1+ is also used
- reword commit log accordingly
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 449ac1b6cb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Irrlicht fail to detect properly the NEON support on aarch64 or ARM with NEON FPU support.
While linking an application with libIrrlicht.so, we get an undefined reference to
png_init_filter_functions_neon.
Some files are missing in the libpng bundled in Irrlicht, in particular arm/arm_init.c [1],
so disable NEON support completely.
This can be reproduced by building minetest using this defconfig for aarch64:
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MINETEST=y
BR2_PACKAGE_MINETEST_CLIENT=y
BR2_PACKAGE_MINETEST_SERVER=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
Or for ARM with NEON FPU support:
BR2_arm=y
BR2_cortex_a15=y
BR2_ARM_FPU_NEON=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_MINETEST=y
BR2_PACKAGE_MINETEST_CLIENT=y
BR2_PACKAGE_MINETEST_SERVER=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_GLX=y
BR2_PACKAGE_XORG7=y
[1] https://github.com/glennrp/libpng/tree/v1.6.37/arm
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bf5f4f417a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cbs_jpeg_split_fragment in libavcodec/cbs_jpeg.c in FFmpeg 4.2.2 has a
heap-based buffer overflow during JPEG_MARKER_SOS handling because of a
missing length check.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit aab52d8722)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we prepare the release, we generate the manual in various formats,
so that it can be consulted locally without needing the miriads of tools
needed to generate it.
However, this creates the temporary .br2-external.* files in the output
directory, and those end up in the release tarball.
This is not a problem in practice, but is not clean.
Run 'distclean' in the output directory, to get rid of everything but
the generated documentation.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bee47598aa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-11945: An issue was discovered in Squid before 5.0.2. A
remote attacker can replay a sniffed Digest Authentication nonce to gain
access to resources that are otherwise forbidden. This occurs because
the attacker can overflow the nonce reference counter (a short integer).
Remote code execution may occur if the pooled token credentials are
freed (instead of replayed as valid credentials).
http://www.squid-cache.org/Advisories/SQUID-2020_4.txt
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b365c64236)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Under certain circumstances (host distribution, openssl version),
the qemu-system binary fail to start:
qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
There is no problem when only host-qemu is built, but it's linked with /lib64/libcurl.so.4
$ make host-qemu
$ ldd output/host/bin/qemu-system-aarch64
[...]
libcurl.so.4 => /lib64/libcurl.so.4 (0x00007fb21cb57000)
libssh.so.4 => /lib64/libssh.so.4 (0x00007fb21c35d000)
libpsl.so.5 => /lib64/libpsl.so.5 (0x00007fb21c34a000)
libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007fb21c2b4000)
Note: /lib64/libcurl.so.4 is linked with libssh and libssl:
$ ldd /lib64/libcurl.so.4
[...]
libssh.so.4 => /lib64/libssh.so.4 (0x00007f90d8efd000)
libpsl.so.5 => /lib64/libpsl.so.5 (0x00007f90d8eea000)
libssl.so.1.1 => /lib64/libssl.so.1.1 (0x00007f90d8e54000)
Continue the build.
$ make
We can notice that qemu_aarch64_virt_defconfig set
BR2_LINUX_KERNEL_NEEDS_HOST_OPENSSL=y
So host-openssl package is built and this is the problem:
$ ldd output/host/bin/qemu-system-aarch64
[...]
libcurl.so.4 => /lib64/libcurl.so.4 (0x00007f3adb444000)
libssh.so.4 => /lib64/libssh.so.4 (0x00007f3adac4a000)
libpsl.so.5 => /lib64/libpsl.so.5 (0x00007f3adac37000)
libssl.so.1.1 => /home/naourr/buildroot/test/qemu_aarch64_virt_defconfig-master/host/lib/libssl.so.1.1 (0x00007f3adaba8000)
qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
This is due to the build system trying to find libcurl using
pkg-config or curl-config.
libcurl is used by the QEMU Block driver for CURL images and
elf2dmp tool which is not needed.
Instead of adding host-libcurl dependency, we can disable it
entierely.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e30eaeb10e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no host variant for SDL2 library in Buildroot.
So the qemu build system will try to detect automatically the
external SDL2 libraries installed on the host.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libSDL2-2.0.so.0 => /lib64/libSDL2-2.0.so.0
Disable explicitely sdl2 options (named sdl) to improve the
build reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 44e5da60b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bzip2 support is needed for reading bzip2-compressed dmg images.
But the host-bzip2 is missing from host qemu package dependency,
so the qemu build system will try to detect automatically the
external libbzip2 libraries installed on the host.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libbz2.so.1 => /lib64/libbz2.so.1
or
libbz2.so.1.0 => output/host/lib/libbz2.so.1.0
if host-bzip2 is built before host-qemu.
Disable explicitely bzip2 options to improve the build
reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 743fceb2ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The vnc support is enabled by default and the build system
will try to detect automatically some external libraries
installed on the host for vnc-png, vnc-jpeg and vnc-sasl.
$ ldd output/host/bin/qemu-system-aarch64
[...]
libpng16.so.16 => /lib64/libpng16.so.16
or
libpng16.so.16 => output/host/lib/libpng16.so.16
if host-libpng is built before host-qemu.
Disable explicitely thoses options to improve the build
reproducibility.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ece36b9a46)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no host-libssh in Buildroot, avoid qemu build system
to find libssh from the host.
Under certain circumstances (host distribution, openssl version), the
qemu-system binary fail to start:
host/bin/qemu-system-aarch64: symbol lookup error: /lib64/libssh.so.4: undefined symbol: EVP_KDF_ctrl, version OPENSSL_1_1_1b
$ ldd output/host/bin/qemu-system-aarch64
[...]
libssh.so.4 => /lib64/libssh.so.4
Explicitely disable libssh for the host variant.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0c4a80c7c4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without a source for randomness, qpdf will crash with 'no such file'
error. It's can me tested by command like 'qpd some_pdf.pdf -'.
This problem breaks cups printing.
This patch change configure options to '--with-random=/dev/urandom'
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 69dfbbd33b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- ChangeLog:
- compression bomb protection
- memory handling issue found by Oss-Fuzz
- improve handling of anomalies in traffic
- Drop first patch (already in version)
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b3d5194696)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit b80712a16a ("configs/odroidc2:
remove the defconfig") has removed the odroidc2 defconfig, but left
behind a number of files in board/hardkernel/odroidc2, which are now
unused. Let's remove them.
Signed-off-by: Dagg Stompler <daggs@gmx.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 197da62866)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- I fixed build problems on cups and cups-filters but don't use them.
- gtest, libpam-radius-auth, libpam-tacplus and perl-file-util were
used in my previous job. I don't have access to the packages that
use them neither to the corresponding test infrastructure anymore.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1c3ffaed57)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back in 2014, about 6 years ago now, in my infinite wisdom, I
decided that extracting the tzdata source was not necessary for
the target variant, because we would be installing the files
generated by the host variant, in commit 7aad5daa5d (package/tzdata:
only compile the zoneinfo once).
However, that did not account for the fact that we would eventually
like to have the licensing information for tzdata, later added in
2019, in commit 60889ccdf0 (package/tzdata: bump to version 2019b).
However, that last comit only added the license file to the host
variant, without explanations why that was so. It turns out that the
reason it was not added to the target variant is, probably, that he
source code for the target variant is not extracted, and thus saving
the license file fails.
But we really want the license file for what goes on into the target.
So, do extract the source code for the target variant, even if only to
get the license file.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Richard Braun <rbraun@sceen.net>
Cc: Martin Bark <martin@barkynet.com>
Cc: Christopher McCrory <chrismcc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5c0c4861be)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2f976c31b0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Alexander Dahl <post@lespocky.de>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7656cae01e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a minor release which provides fixes for CVE-2020-11793,
CVE-2020-3887, CVE-2020-3894, and CVE-2020-3899.
Updating from 2.28.0 also brings a few rendering fixes, a build fix
on MIPS64, a build fix for GStreamer 1.12, and solves a couple of
crashes. The full release notes covering 2.28.1 and 2.28.2 can be
found at:
https://webkitgtk.org/2020/04/13/webkitgtk2.28.1-released.htmlhttps://webkitgtk.org/2020/04/24/webkitgtk2.28.2-released.html
A detailed security advisory can be found at:
https://webkitgtk.org/security/WSA-2020-0004.html
Note that the above does not cover all the CVEs, and a new advisory
including them is expected to be published in the next days.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 080f4251ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a minor release which provides fixes for CVE-2020-11793,
CVE-2020-3887, CVE-2020-3894, and CVE-2020-3899.
Updating from 2.28.0 also brings a few rendering fixes, a build fix
on MIPS64, a build fix for GStreamer 1.12, and solves a couple of
crashes. The full release notes covering 2.28.1 and 2.28.2 can be
found at:
https://wpewebkit.org/release/wpewebkit-2.28.1.htmlhttps://wpewebkit.org/release/wpewebkit-2.28.2.html
A detailed security advisory can be found at:
https://wpewebkit.org/security/WSA-2020-0004.html
Note that the above does not cover all the CVEs, and a new advisory
including them is expected to be published in the next days.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e028d52b7e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mesa3d-headers is a little bit special: it uses the same sources as
the mesa3d package, named just 'mesa' upstream. mesa uses the meson
buildsystem, an that is what we use in the mesa3d package.
However, mesa3d-headers does not install the whole of mesa; it only
installs a select set of headers for those binary blobs that do not
provide them.
mesa does not provide such a feature (only installing headers) with
its meson buildsystem. As a consequence, we've made mesa3d-headers a
generic package, that basically only copies headers over.
Additionally, mesa3d-headers also provides the dri.pc file for when
Xorg is enabled; see 7468b60e7c (package/mesa3d-headers: also install
dri header and .pc file).
We used to manually generate that file from a .in template that was
present in mesa source code at the time it was still using autotools.
But when they switched over to using meson, the template was dropped
[0], and the dri.pc is now entirely generated using meson internals
[1].
So we now have no template present in the source code, so we must
come up with our own. This simplifies the replacement pattern to
just inject the version string.
[0] https://cgit.freedesktop.org/mesa/mesa/commit/?id=158758618264eac113025a86a360dc305ed4498b
[1] https://cgit.freedesktop.org/mesa/mesa/tree/src/mesa/drivers/dri/meson.build?h=19.2#n93
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Vincent Fazio <vfazio@xes-inc.com>
[yann.morin.1998@free.fr:
- entirely rework the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9014c21cac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
paho-mqtt-c by default enables the building of test materials and
install of CPack documentation:
PAHO_ENABLE_TESTING - "Build tests and run"
PAHO_ENABLE_CPACK - "Enable CPack"
Let's disable these to save a couple megabytes and time. This is
in keeping with the generic settings in pkg-cmake.mk.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5686d69eef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When 4bcc344464 was applied, it was not
noticed that 96dc6701af (from another
contributor) had already been
applied. 4bcc344464 essentially did the
same thing as 96dc6701af, except it also
disable zstd support explicitly in the host-libarchive package.
Let's drop the part of 4bcc344464 that
duplicates 96dc6701af.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 37e853d63c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When booting with 'console=<empty>' in the kernel command line (as e.g.
U-Boot does with silent flags in effect), opening /dev/console fails.
As per POSIX [0], when iany redirection fails, the shell running exec
shal exit in error. So, when 'console=<empty>' is specified.
/dev/console can't be opened, and the redirection fails, and /init is
killed.
That behaviour was fixed on the kernel side with commit 2bd3a997befc2
(Open /dev/console from rootfs), present since 2.6.34, released in May
2010, so any [dr]ecent kernel will have that fix.
Furthermore, busybox will fix things up anyway (in bb_sanitize_stdio()),
falling back to opening /dev/null if no console is availble. systemd
does a similar thing (in make_console_stdio()), and sysvinit again has
a similar approach (in console_init()).
The archealogy search turned up those relevant commits:
2011-08-04 10a130f91e initramfs/init: make sure that 0, 1, 2 fds are available
introduces the three exec redirections in initramfs
2011-09-06 3fac21ef8d cpio: fix boot with dynamic /dev
introduces the three exec redirections in cpio
2011-09-06 13a3afc536 fs/initramfs: refactor with fs/cpio
dropped the initramfs tweaks to reuse the cpio ones
2012-11-04 e1ebae700a fs/common: Create initial console device
introduces the /dev/console char,5,1 pseudo device creation in
cpio
2018-03-31 dec061adce fs/cpio: don't extend packages' permissions table
switched from the permission-table to a manual mknod to create
/dev/console
The redirections were added before we could guarantee there was a
/dev/console in the rootfs.
We're now guaranteed to have /dev/console in an initramfs, and any recent
kernel will automatically open /dev/console before spawning /init.
The three redirections are useless now, and cause harm under certain
conditions. Drop them.
[0] https://pubs.opengroup.org/onlinepubs/9699919799/utilities/V3_chap02.html#tag_18_20_01
Signed-off-by: Timo Ketola <timo.ketola@exertus.fi>
Cc: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr:
- extend commit log with the analysis done with Peter
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 98a6f1fc02)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The reason why the external wireguard kernel module is not allowed with
kernel headers >= 5.6 is that wireguard is included in the upstream kernel
since 5.6 rather than some kind of (fixable) incompatibility issue. Adjust
the comment to make that clear.
While we're at it, drop the redundant !5.6 dependency on the kernel headers
dependency comment. If headers are older than 3.10, then they are also
older than 5.6, so the statement is redundant.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 74a865b1fc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since wireguard is built into kernels 5.6 and later we can't build
wireguard-linux-compat on them, so we need to depend on
!BR2_TOOLCHAIN_HEADERS_AT_LEAST_5_6.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit da5afc10a4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Latest version of Apache introduce a new apxs with a slightly modified
path handling logic. In order to simplify the crosscompilation, the
software removes the common prefix from bin install dir and build
install dir, but for this to work they both should have a common prefix.
So we introduce a new regexp to fix /usr/bin to staging dir, the regexps
are also fixed to replace only the exact path between double quotes, to
avoid replacing the she-bang line.
Fixes:
http://autobuild.buildroot.net/results/c41f31566974209897a3a1ec35afe2536fb248cchttp://autobuild.buildroot.net/results/b93f19976ce96e79ea159c25ed74a7377c78f334
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- add the last few words about the she-bang blurb
- do not use quotes in the existing /sur/bin regexp
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit aa04edab77)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
python-jedi bundles its own copy of typeshed since version 0.14.0 and
7d2b7bb3c1
So add it to the license files (and update indentation of hash file to
two spaces while at it)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ab98c1ffb6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice: 5.5.x is now EOL, so should be dropped at the next version bump.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Peter: drop 5.5.x / 5.6.x bump]
(cherry picked from commit 72a6e50da9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Several directories and files are currently not installed during the
target installation, these include:
- conf
Several configuration files, including security configuration files which
may be necessary for running various java applications.
- legal
This directory contains legal notices that some java applications may
require, as they may print legal information and will throw exceptions at
runtime if the legal files are not present on the system.
- release
This file contains a list of modules included in the image.
Because these directories take up less than of megabyte extra, it is not an
issue to install all of them.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 63b576095b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, Buildroot installs the jre libraries using
cp -dprf /build/linux-*-release/images/jre/lib/* $(TARGET_DIR)/usr/lib/
However, if a system has a merged /usr directory, and there is a built kernel
before installing OpenJDK, the installation fails because jre/lib has binary
modules file, which causes the following error: cp: cannot overwrite directory
'/usr/lib/modules with non-directory
The obvious fix is to install the modules to /usr/lib/jvm/ and set the
appropriate rpaths via the --with-extra-ldflags conf option. However, this fix
does not work because the built binaries themselves do not link against
libjava.so
Indeed, running readelf on the built java binary reports the following:
"(RUNPATH) Library runpath: [/usr/lib/jvm]" and /usr/lib/jvm/libjava.so exists.
However, when running the Java binary on the target, the following error
occurs: "Error: could not find libjava.so."
The following is the result of "strace java" ran on the target:
faccessat(AT_FDCWD, "/usr/lib/libjava.so", F_OK) = -1 ENOENT
faccessat(AT_FDCWD, "/usr/jre/lib/libjava.so", F_OK) = -1 ENOENT
newfstatat(AT_FDCWD, "/usr/lib/libjava.so", 0x7ffe7b4af8, 0) = -1 ENOENT
newfstatat(AT_FDCWD, "/usr/lib/jvm/libjli.so", [sic] AT_SYMLINK_NOFOLLOW) = 0
As seen above, the java binary searches for libjli.so in /usr/lib/jvm,
which demonstrates that the java binary searches for some of the
DT_NEEDED libraries using the correct rpath. But libjava.so is not
searched from the rpath; it is instead dl-opened manually, looked for in
the search paths hardcoded to the following directories:
- /usr/lib/
- /usr/jre/lib/
- $(dirname $0)/../lib/
The reason behind the hardcoded paths given by the maintainers is due to
historical purposes for the need to support several java versions at the
same time on a single system, and that changing the above behavior is not
likely to ever happen.
As such, most distributions such as Redhat do the following:
- Create the directory /usr/lib/jvm/java-$(JAVA_VERSION)/
- Install all directories and files found in images/jre to that directory.
- Symlink the binaries to in /usr/lib/jvm/java-$(JAVA_VERSION)/bin to
/usr/bin.
However, because Buildroot does not need to support multiple versions of java
concurrently, there is no need for the additional java-$(JAVA_VERSION)
directory.
To fix the above issue, the following changes are performed:
- Introduce the variable "OPENJDK_INSTALL_BASE" which points to /usr/lib/jvm
- Set the --with-extra-ldflags conf_opt to
"-Wl,-rpath,$(OPENJDK_INSTALL_BASE)/lib,-rpath,
$(OPENJDK_INSTALL_BASE)/lib/$(OPENJDK_JVM_VARIANT)"
- Run "mkdir -p $(TARGET_DIR)/usr/lib/jvm/" in the INSTALL_TARGET_CMDS step.
- Copy both the lib and bin directories to /usr/lib/jvm/
- Symlink the binaries in /usr/lib/jvm/bin/ to /usr/bin.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12751
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
[yann.morin.1998@free.fr: fix two remaining mis-placed '/']
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3edb915709)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to commit 4102db0f7a ("package/libglib2: bump to version 2.60.3")
which converted libglib2 to meson, Buildroot used to set a range of
autoconf options to bypass tests that require running binaries.
The meson version of libglib2's build system has many fewer of these
checks, but there are still some and these can be fed the "correct"
answer by adding properties to cross-compilation.conf.
Add the necessary properties to indicate that we have C99 compliant
print functions to avoid pulling in the gnulib fallback.
Signed-off-by: John Keeping <john@metanate.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4f91198f0d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes CVE-2020-1967:
Server or client applications that call the SSL_check_chain() function during
or after a TLS 1.3 handshake may crash due to a NULL pointer dereference as a
result of incorrect handling of the "signature_algorithms_cert" TLS extension.
The crash occurs if an invalid or unrecognised signature algorithm is received
from the peer. This could be exploited by a malicious peer in a Denial of
Service attack. OpenSSL version 1.1.1d, 1.1.1e, and 1.1.1f are affected by this
issue. This issue did not affect OpenSSL versions prior to 1.1.1d.
See https://www.openssl.org/news/secadv/20200421.txt
Also update the hash file to the new two spaces convention
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 849aee4f88)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_SOFT_FLOAT option is lost while loading the defconfig with:
make qemu_ppc_virtex_ml507_defconfig
On powerpc, BR2_POWERPC_SOFT_FLOAT must be used to enable soft
floating point support.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b6245ed49b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_GLMARK2 is lost while loading the defconfig with:
make engicam_imx6qdl_icore_qt5_defconfig
In order to select gmark2 package, BR2_PACKAGE_GLMARK2_FLAVOR_ANY option
must be set.
Based on the defconfig without X11 and wayland package, the only missing
option to select BR2_PACKAGE_GLMARK2_FLAVOR_ANY is BR2_PACKAGE_HAS_UDEV.
The only possible option is to enable one of the udev provider
(eudev or systemd). Select eudev package for /dev management.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Fabio Estevam <festevam@gmail.com>
Reviewed-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6dd11cefb8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
board/amarula/a64-relic/readme.txt makes use the host fastboot utility
to flash the board. However, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT
(which is enabled in the defconfig) has a dependency on
BR2_PACKAGE_HOST_ANDROID_TOOLS, which is not enabled in the
defconfig. Due to this, BR2_PACKAGE_HOST_ANDROID_TOOLS_FASTBOOT=y is
lost when loading the defconfig.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Jagan Teki <jagan@amarulasolutions.com>
[Thomas: change to add BR2_PACKAGE_HOST_ANDROID_TOOLS=y]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 016a1d80ea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Parallel make used to be broken in exim, as reported in its docs. Now that
line has disappeared from the docs, and parallel make is actually working.
Tested with 'make exim-dirclean ; time make BR2_JLEVEL=999 exim': builds
still succeed and the build time decreases from 34 to 11 seconds on my
host.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 153b78ee26)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rhys has asked through private e-mail to be removed:
==
Please can I be removed as the developer, as I’m not longer involved.
Cheers Rhys
==
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 45e8a699a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-std=c++11 is needed to avoid the following build failure with poppler
and gcc 5:
/home/naourr/work/instance-0/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/poppler/cpp/poppler-page.h:40:37: note: C++11 'noexcept' only available with -std=c++11 or -std=gnu++11
/home/naourr/work/instance-0/output-1/host/bin/../arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/poppler/cpp/poppler-page.h:70:10: error: 'unique_ptr' in namespace 'std' does not name a template type
std::unique_ptr<text_box_data> m_data;
^
Fixes:
- http://autobuild.buildroot.org/results/3428b9017168db9239756dc06cdaa5ae004cab97
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d9a4208f62)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to migration to pkg-config in php 7.4, the detection of
library dependencies has been changed.
source from php.net:
--with-gd becomes --enable-gd
--with-png-dir has been removed. libpng is required.
--with-zlib-dir has been removed. zlib is required.
--with-freetype-dir becomes --with-freetype
--with-jpeg-dir becomes --with-jpeg
Signed-off-by: Louis Aussedat <aussedat.louis@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 31c5fd8f4b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If tty_handler() resets terminal while pkttyagent is run in background job,
the process gets stopped by SIGTTOU. This impacts systemctl, hence it must
be blocked for a while and then the process gets killed anyway.
Upstream commit: 28e3a6653d8c3777b07e0128a0d97d46e586e311
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0d749be3e1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes two small memory leaks.
Upstream commit: 28e3a6653d8c3777b07e0128a0d97d46e586e311
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ba70e29fea)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default installed service file is missing a target, which causes preset-all
to not enable the service.
Add the service file to package/polkit with the addition of:
[Install]
WantedBy=multi-user.target
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3f885d9dfe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-make-netgroup-support-optional.patch patches configure.ac, but we
don't autoreconf the package, which is not good.
However, simply adding AUTORECONF = YES is not sufficient: polkit
Makefile.am use the automake conditional HAVE_INTROSPECTION, which is
"available" only when the gobject-introspection m4 file is installed.
Since we don't want to make gobject-introspection a mandatory
dependency of polkit, we take a simpler route: add a copy of
introspection.m4 into the polkit source tree. This is only a 142 lines
file, and it can be dropped when
0001-make-netgroup-support-optional.patch is merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8edcb84730)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The help text was wrong, as it didn't match the actual default values
we were specifying. Indeed, when we specify:
default 31 if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_13
default 30 if BR2_TOOLCHAIN_HEADERS_AT_LEAST_4_3
It means that the policy version 30 is supported starting from Linux
4.3 included, and that 31 is supported from Linux 4.13 included.
So we shouldn't have:
> 4.3 <= 4.13 30
> 4.13 31
but:
>= 4.3 < 4.13 30
>= 4.13 31
This patch fixes that for all versions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 67d7705a9a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
EXT_SUFFIX in Python versions > 3.5 contains a platform tag which only applies
to cpython extensions. Given that ctypes.util.find_library does not work on the
target due to the absence of the underlying tools '.so' needs to be added as a
possible suffix for libraries to enable python-iptables to find the iptables
shared libraries.
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 52276cdda3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ctypes.util.find_library() depends on gcc and friends to detect the location of
a given shared library. Given that these are not available on the target and
that python-iptables depends on this functionality we need to work around this.
The SONAMEs of the libc are well known so we try the known ones for glibc,
uClibc and musl.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12271
Signed-off-by: Frank Vanbever <frank.vanbever@essensium.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 90c18ab269)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-10932: fix side channel in ECC code that allowed an
adversary with access to precise enough timing and memory access
information (typically an untrusted operating system attacking a
secure enclave) to fully recover an ECDSA private key.
- Fix a potentially remotely exploitable buffer overread in a DTLS
client when parsing the Hello Verify Request message.
- Fix bug in DTLS handling of new associations with the same parameters
(RFC 6347 section 4.2.8): after sending its HelloVerifyRequest, the
server would end up with corrupted state and only send invalid records
to the client. An attacker able to send forged UDP packets to the
server could use that to obtain a Denial of Service. This could only
happen when MBEDTLS_SSL_DTLS_CLIENT_PORT_REUSE was enabled in
config.h (which it is by default).
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b5704f8869)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, exim stores its PID file in /var/spool/exim, and its log
file in /var/spool/exim/log, but it makes a lot more sense to have the
logs in /var/log/exim and the PID file in /var/run/exim.
Using binary name subdirectory in both cases allows for the use of
systemd's LogsDirectory and RuntimeDirectory statements
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 754341460b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The released libssh package does wrongly reports the previous version.
This patch fixes the version field in the lib.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a7db921da5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2020-1730: Possible DoS in client and server when handling
AES-CTR keys with OpenSSL.
Format hash file with two spaces delimiter.
Cc: Scott Fan <fancp2007@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6b8a47e292)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no reason to create boot.scr in board/udoo/neo and later
install it in TARGET_DIR/boot, leaving a stale file behind.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2306339d1f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no reason to create boot.scr in board/solidrun/mx6cubox and
later install it in TARGET_DIR/boot, leaving a stale file behind.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9ddbd11620)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no reason to create boot.scr at board/wandboard and later
install it at TARGET_DIR/boot, leaving a stale file behind.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f14e95b3ff)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unlike the other libraries built by azure-iot-sdk-c, libumqtt follows
a regular versioning scheme. It has a libumqtt.so.1 SONAME, with
libumqtt.so.1 being a symlink to libumqtt.so.1.1.11.
However, we currently install the library itself as libumqtt.so to the
target filesystem, which is not its SONAME, which means it cannot be
found by any other library/program linked against it.
This commit fixes that by installing the library as
libumqtt.so.1.1.11, and creating the appropriate symlinks. The static
library installation is not modified.
Signed-off-by: Stephan Hoffmann <stephan.hoffmann@ext.grandcentrix.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 570dd0c31b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a preparation for adding the creation of some symlinks, let's
factor the library installation into a function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 43822bb6db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The canonical way to use $(INSTALL) is to have a full destination
path, that includes the file name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 59de11b047)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original pattern for creating the pid file was:
open_create(pid_file)
write(pid_file, pid)
close(pid_file)
But if a power outage occurs between open_create and write, the file will
be empty and httpd will refuse to start afterwards unless the corrupt pid
file is removed.
This patch uses the pattern:
open_create(temp_pid_file)
write(temp_pid_file)
close(temp_pid_file)
rename(temp_pid_file, pid_file)
which is guaranteed to be atomic, provided that temp_pid_file and pid_file
are located in the same file system, which this patch does by creating
a temporary file name with the pattern:
pid_file_name + random_suffix
Patch is upstream as of
dd10a9352e,
which will be in the next 2.5.x version.
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
[Thomas: update to use upstreamed patch.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 67fbb903b6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
*) SECURITY: CVE-2020-1934 (cve.mitre.org)
mod_proxy_ftp: Use of uninitialized value with malicious backend FTP
server. [Eric Covener]
*) SECURITY: CVE-2020-1927 (cve.mitre.org)
rewrite, core: Set PCRE_DOTALL flag by default to avoid unpredictable
matches and substitutions with encoded line break characters.
The fix for CVE-2019-10098 was not effective. [Ruediger Pluem]
The LICENSE file has been updated to fix a s/waranties/warranties/ typo, so
update the hash to match and adjust the spacing to match recent agreements:
-This software is provided "as is" and any express or implied waranties,
+This software is provided "as is" and any express or implied warranties,
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2bf40ad66b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds @CMAKE_SYSROOT@ to mariadb_config.c.in. Without it,
mariadb_config and mysql_config incorrectly returns host paths for
include paths and library paths.
The patch has been accepted upstream at
b787c0d69c
Reported-by: Alexey Lukyanchuk <skif@skif-web.ru>
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 905e4f2890)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream libmad is dead since 2004 so switch to debian package to get
two patches that fix the following CVEs:
- CVE-2017-8372: The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b, if NDEBUG is omitted, allows remote attackers to
cause a denial of service (assertion failure and application exit)
via a crafted audio file.
- CVE-2017-8373: The mad_layer_III function in layer3.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer overflow and application crash) or possibly have
unspecified other impact via a crafted audio file.
- CVE-2017-8374: The mad_bit_skip function in bit.c in Underbit MAD
libmad 0.15.1b allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted
audio file.
Moreover:
- Remove third patch (replaced by optimize.diff debian patch)
- Remove fourth patch (same patch than
Provide-Thumb-2-alternative-code-for-MAD_F_MLN.diff)
- Remove fifth patch (same patch than libmad.thumb.diff)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 858df3643f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since switch to debian in commit
210ccaef57, host-gperf is needed to
generate frametype.c because debian/patches/add-m4-directory.patch
patches Makefile.am. As a side effect, libid3tag tries to generate
frametype.c from frametype.gperf due to following rule:
$(srcdir)/frametype.c: $(srcdir)/frametype.gperf Makefile.am
cd $(srcdir) && \
gperf -tCcTonD -K id -N id3_frametype_lookup -s -3 -k '*' \
frametype.gperf | \
sed -e 's/\(struct id3_frametype\);/\1/' | \
sed -e '/\$$''Id: /s/\$$//g' >frametype.c
If host-gperf is not available, frametype.c will be empty and build with
madplay will fail on:
configure:17243: checking for snd_pcm_open in -lasound
configure:17268: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/powerpc64-linux-gcc -o conftest -Wall -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -D_FORTIFY_SOURCE=1 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 conftest.c -lasound -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lasound -L/home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib -lid3tag >&5
/home/giuliobenetti/autobuild/run/instance-3/output-1/host/opt/ext-toolchain/bin/../lib/gcc/powerpc64-buildroot-linux-gnu/8.3.0/../../../../powerpc64-buildroot-linux-gnu/bin/ld: /home/giuliobenetti/autobuild/run/instance-3/output-1/host/bin/../powerpc64-buildroot-linux-gnu/sysroot/usr/lib/libid3tag.so: undefined reference to `id3_frametype_lookup'
Fixes:
- http://autobuild.buildroot.org/results/15a8c7f6e34b26446179c04383719ea71495403e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7ecd0e4edf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream libid3tag is dead since 2004 so switch to debian to get two
patches that fix the following CVEs:
- CVE-2004-2779: id3_utf16_deserialize() in utf16.c in libid3tag
through 0.15.1b misparses ID3v2 tags encoded in UTF-16 with an odd
number of bytes, triggering an endless loop allocating memory until
an OOM condition is reached, leading to denial-of-service (DoS).
- CVE-2017-11550: The id3_ucs4_length function in ucs4.c in libid3tag
0.15.1b allows remote attackers to cause a denial of service (NULL
Pointer Dereference and application crash) via a crafted mp3 file.
- CVE-2017-11551: The id3_field_parse function in field.c in libid3tag
0.15.1b allows remote attackers to cause a denial of service (OOM)
via a crafted MP3 file.
Moreover, drop patch (replaced by add-m4-directory.patch debian patch)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 210ccaef57)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The DTLS support needs either gnutls or openssl, so let's have these
packages as optional dependencies. We prefer gnutls over openssl as
done by upstream in their configure.ac when the user does not provide
any option (which is the case currently)
While there is support for tinydtls, and Buildroot has a tinydtls
package, libcoap is only able to use its own internal library, and
only when static linking is enabled, so we simply disable the use of
tinydtls altogether.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8b14f6b49b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since there is a variable definition between the definition of
BR2_PACKAGE_JPEG and the choice depending on it, the choice is
not indented bewlo the "jpeg support" prompt, like we like to
have:
[*] jpeg support
jpeg variant (jpeg-turbo) --->
Move the BR2_PACKAGE_JPEG right before the choice (really, move
BR2_PACKAGE_JPEG_SIMD_SUPPORT before BR2_PACKAGE_JPEG, but diff
finds the move of BR2_PACKAGE_JPEG is smaller to display):
[*] jpeg support
jpeg variant (jpeg-turbo) --->
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7a48ac725f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 2cc2ae83fc, kodi-pvr-vuplus
has a dependency on json-for-modern-cpp, but the dependency of
json-for-modern-cpp on gcc >= 4.9 was not propagated. Let's fix that.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 76c2914703)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9cae8f557b introduced an optional
dependency on GPM, but got the name of the option wrong, and used
GMP. In fact, even the commit title was wrong.
This causes a build failure:
Makefile:578: *** gpm is in the dependency chain of mc that has added it to its _DEPENDENCIES variable without selecting it or depending on it from Config.in. Stop.
Fixes:
http://autobuild.buildroot.net/results/52fb92ae7dd55cba7d19862bb6cd89c80da9a4b6/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 52d10583b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit dcaf6e75a (package/gcc: pass -Wno-error to debug builds)
introduced non-ASCII characters in a comment, copy-pasted from a
terminal output.
check-package does not like non-ASCII characters, and whines about
them.
Replace the fancy quotes by standard ASCII ones.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2a6003ddd5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-11100: In hpack_dht_insert in hpack-tbl.c in the HPACK
decoder in HAProxy 1.8 through 2.x before 2.1.4, a remote attacker can
write arbitrary bytes around a certain location on the heap via a
crafted HTTP/2 request, possibly causing remote code execution.
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5ec43086bc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
* CVE-2020-11501: It was found that GnuTLS 3.6.3 introduced a
regression in the DTLS protocol implementation. This caused the DTLS
client to not contribute any randomness to the DTLS negotiation
breaking the security guarantees of the DTLS protocol.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 170d06cfc6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc fails to build in debug build with debug optimisations:
BR2_x86_corei7=y
BR2_ENABLE_DEBUG=y
BR2_DEBUG_3=y
BR2_OPTIMIZE_G=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
which fails with:
../../../../libsanitizer/libbacktrace/../../libbacktrace/elf.c:772:21: error: ‘st.st_mode’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
return S_ISLNK (st.st_mode);
^
Upstream has been unable to reproduce/fix properly, details:
https://gcc.gnu.org/legacy-ml/gcc-patches/2019-03/threads.html#00827
Upstream recommends passing -Wno-error as a workaround, see:
https://gcc.gnu.org/pipermail/gcc-patches/2019-April/519867.html
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: add the reproducing defconfig]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit dcaf6e75ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the staging installation, we replace a number of paths in libtool
.la files so that those paths point to STAGING_DIR instead of a location
in the build machine.
However, we replace only paths that start with /usr. And it turns out
that the linux-pam package is configured with --libdir=/lib (linux-pam
seems to always be installed in /lib rather than /usr/lib).
Due to this, libpam.la contains the following line:
libdir='/lib'
When building a configuration that has:
- BR2_ROOTFS_MERGED_USR=y
- BR2_PACKAGE_LINUX_PAM=y
- BR2_PACKAGE_POLKIT=y
on a system that has its system-wide PAM library installed in /lib,
the build fails with:
/lib/libpam.so: file not recognized: File format not recognized
For some reason, libtool searches only in STAGING_DIR/usr/lib, but
when BR2_ROOTFS_MERGED_USR=y, STAGING_DIR/lib points to
STAGING_DIR/usr/lib, so libtool finds libpam.la. And this libpam.la
contains a bogus libdir='/lib' path. libtool then goes on, finds
/lib/libpam.so, and links with it, causing the build failure.
By doing the proper replacement of libdir='/lib', we have a correct
libpam.la, and solve the build issue.
There is no autobuilder failure associated to this issue, as it
requires /lib/libpam.so to exist. This is the case on ArchLinux, on
which Xogium reported the issue, which can also be reproduced in an
ArchLinux container.
Reported-by: Xogium <contact@xogium.me>
Cc: Xogium <contact@xogium.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- tested by manually creating a symlink to libpam.so in /lib
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7ae7c82dd6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-5291: Bubblewrap (bwrap) before version 0.4.1, if installed
in setuid mode and the kernel supports unprivileged user namespaces,
then the `bwrap --userns2` option can be used to make the setuid process
keep running as root while being traceable. This can in turn be used to
gain root permissions. Note that this only affects the combination of
bubblewrap in setuid mode (which is typically used when unprivileged
user namespaces are not supported) and the support of unprivileged user
namespaces.
Also update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d82a5ade0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following defconfig:
BR2_x86_i686=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://toolchains.bootlin.com/downloads/releases/toolchains/x86-i686/tarballs/x86-i686--glibc--bleeding-edge-2018.11-1.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_8=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_14=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM_GLIBC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_TARGET_SYSLINUX=y
BR2_TARGET_SYSLINUX_EFI=y
fails to build due to missing setjmp/longjmp definitions, which is a
consequence of a change introduced between gnu-efi 3.0.9 and 3.0.10.
This build failure is fixed by adding another syslinux paytch, which
has been submitted upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6d5da6d916)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the swupdate SYSTEMD option is enabled, systemd needs to be built
before swupdate, otherwise the build fails with:
core/notifier.c:27:10: fatal error: systemd/sd-daemon.h: No such file or directory
27 | #include <systemd/sd-daemon.h>
| ^~~~~~~~~~~~~~~~~~~~~
Of course, it remains up to the user to make sure that the systemd
package is enabled when systemd support is enabled in the swupdate
configuration.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bea0d20c78)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cgit URL is a mirror of the gitlab repository.
The README.md file of the kmscube project also points
to the gitlab repository, so switch the URL accordingly.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8ab9acbed8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sysdig homepage we have points to an "on-sale" domain, that is
purportedly serving malware while at it. Update to point to the wiki on
github instead.
Fixes#12746.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- use wiki instead of git repo
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ca3166da48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"This release fixes three security issues in ntpd and provides 46
bugfixes and addresses 4 other issues." [1]
NONE: Sec 3610: process_control() should bail earlier on short packets.
MEDIUM: Sec 3596: Unauthenticated ntpd may be susceptible to IPv4 spoof
attack from highly predictable transmit timestamps.
MEDIUM: Sec 3592: DoS Attack on unauthenticated client.
The fix for https://bugs.ntp.org/3445 introduced a bug whereby a system that
is running ntp-4.2.8p12 (possibly earlier) or p13 that only has one
unauthenticated time source can be attacked in a way that causes the
victim's next poll to its source to be delayed, for as long as the attack is
maintained.
[1] http://support.ntp.org/bin/view/Main/SecurityNotice#March_2020_ntp_4_2_8p14_NTP_Rele
The copyright year has changed in the COPYRIGHT file, so adjust the hash to
match and adjust the spacing to match recent agreements:
@@ -3,7 +3,7 @@
jpg "Clone me," says Dolly sheepishly.
- Last update: 2-Jan-2017 11:58 UTC
+ Last update: 4-Feb-2020 23:47 UTC
__________________________________________________________________
The following copyright notice applies to all files collectively called
@@ -32,7 +32,7 @@
Burnicki is:
***********************************************************************
* *
-* Copyright (c) Network Time Foundation 2011-2017 *
+* Copyright (c) Network Time Foundation 2011-2020 *
* *
* All Rights Reserved *
* *
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Peter: clarify security impact, document COPYRIGHT change]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9daf7483e9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The help text of BR2_LINUX_KERNEL_IMAGE_NAME is somewhat incomplete,
in the sense that it assumes just a filename can be passed, while it
can be a relative path, such as 'compressed/vmlinux.bin.z'. So make it
clear that such paths are relative to arch/ARCH/boot/.
Also, drop the part about this being only useful for Xtensa as this is
not true: on MIPS it might be needed as well for some specific image
types.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ea044ee20c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel image is typically found in arch/ARCH/boot/, which is
why LINUX_IMAGE_PATH is defined as:
LINUX_IMAGE_PATH = $(LINUX_ARCH_PATH)/boot/$(LINUX_IMAGE_NAME)
However, on MIPS, some kernel image types are available from
arch/mips/boot/compressed, or even at the top-level directory. For
such cases, LINUX_IMAGE_NAME might be set (using
BR2_LINUX_KERNEL_IMAGE_NAME) to values such as:
compressed/vmlinux.bin.z
or
../../../uzImage.bin
Except that the line:
$(INSTALL) -m 0644 -D $(LINUX_IMAGE_PATH) $(1)/$(LINUX_IMAGE_NAME)
will lead to such images be installed in:
$(TARGET_DIR)/boot/compressed/vmlinux.bin.z
$(BINARIES_DIR)/compressed/vmlinux.bin.z
and:
$(TARGET_DIR)/boot/../../../uzImage.bin
$(BINARIES_DIR)/../../../uzImage.bin
which of course is completely bogus.
So let's install them under their name, not their full relative path
to arch/ARCH/boot/.
Reported-by: Paul Cercueil <paul@crapouillou.net>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 19be97d497)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues (1.1.1e):
CVE-2019-1551 [Low severity]: There is an overflow bug in the x64_64
Montgomery squaring procedure used in exponentiation with 512-bit moduli.
No EC algorithms are affected. Analysis suggests that attacks against
2-prime RSA1024, 3-prime RSA1536, and DSA1024 as a result of this defect
would be very difficult to perform and are not believed likely. Attacks
against DH512 are considered just feasible. However, for an attack the
target would have to re-use the DH512 private key, which is not recommended
anyway. Also applications directly using the low level API BN_mod_exp may
be affected if they use BN_FLG_CONSTTIME. Reported by OSS-Fuzz and Guido
Vranken.
https://www.openssl.org/news/secadv/20191206.txt
CVE-2019-1563 [Low severity]: In situations where an attacker receives
automated notification of the success or failure of a decryption attempt an
attacker, after sending a very large number of messages to be decrypted, can
recover a CMS/PKCS7 transported encryption key or decrypt any RSA encrypted
message that was encrypted with the public RSA key, using a Bleichenbacher
padding oracle attack. Applications are not affected if they use a
certificate together with the private RSA key to the CMS_decrypt or
PKCS7_decrypt functions to select the correct recipient info to decrypt.
Reported by Bernd Edlinger.
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d397b231b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect
indication of disconnection in certain situations because source address
validation is mishandled. This is a denial of service that should have
been prevented by PMF (aka management frame protection). The attacker
must send a crafted 802.11 frame from a location that is within the
802.11 communications range.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 650d907c13)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
hostapd before 2.10 and wpa_supplicant before 2.10 allow an incorrect
indication of disconnection in certain situations because source address
validation is mishandled. This is a denial of service that should have
been prevented by PMF (aka management frame protection). The attacker
must send a crafted 802.11 frame from a location that is within the
802.11 communications range.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 749fbab0bb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2017-6892: In libsndfile version 1.0.28, an error in the
"aiff_read_chanmap()" function (aiff.c) can be exploited to cause an
out-of-bounds read memory access via a specially crafted AIFF file.
- Fix CVE-2017-8361: The flac_buffer_copy function in flac.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(buffer overflow and application crash) or possibly have unspecified
other impact via a crafted audio file.
- Fix CVE-2017-8362: The flac_buffer_copy function in flac.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(invalid read and application crash) via a crafted audio file.
- Fix CVE-2017-8363: The flac_buffer_copy function in flac.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(heap-based buffer over-read and application crash) via a crafted
audio file.
- Fix CVE-2017-8365: The i2les_array function in pcm.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(buffer over-read and application crash) via a crafted audio file.
- Fix CVE-2017-12562: Heap-based Buffer Overflow in the
psf_binheader_writef function in common.c in libsndfile through 1.0.28
allows remote attackers to cause a denial of service (application
crash) or possibly have unspecified other impact.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 76d5ab4d17)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If python or python3 is selected, nftables should depend on the package
and set the --enable-python option, otherwise set --disable-python
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d6f33d36af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
make-4.3 shipped with a backward incompatible change in how sharp signs
are handled in macros. Previously, up to make 4.2, the sharp sign would
always start a comment, unless backslash-escaped, even in a macro or a
fucntion call.
Now, the sharp sign is no longer starting a comment when it appears
inside such a macro or function call. This behaviour was supposed to be
in force since 3.81, but was not; 4.3 fixed the code to match the doc.
As such, use of external toolchains is broken, as we use the sharp sign
in the copy_toolchain_sysroot macro, in shell variable expansion to
strip off any leading /: ${target\#/}.
Fix that by applying the workaround suggested in the release annoucement
[0], by using a variable to hold a sharp sign.
[0] https://lists.gnu.org/archive/html/info-gnu/2020-01/msg00004.html
Signed-off-by: Yaroslav Syrytsia <me@ys.lc>
[yann.morin.1998@free.fr:
- move the SHARP_SIGN definition out of Makefile and into support/
- expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 35c5cf56d2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
External protobuf is used instead of embedded one since commit
31c68a449e. However it fails to build on:
[ 63%] Building CXX object modules/dnn/CMakeFiles/opencv_dnn.dir/misc/caffe/opencv-caffe.pb.cc.o
In file included from /home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.cc:4:
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.h:17:2: error: #error This file was generated by an older version of protoc which is
17 | #error This file was generated by an older version of protoc which is
| ^~~~~
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.h:18:2: error: #error incompatible with your Protocol Buffer headers. Please
18 | #error incompatible with your Protocol Buffer headers. Please
| ^~~~~
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.h:19:2: error: #error regenerate this file with a newer version of protoc.
19 | #error regenerate this file with a newer version of protoc.
| ^~~~~
/home/naourr/work/instance-0/output-1/build/opencv3-3.4.9/modules/dnn/misc/caffe/opencv-caffe.pb.cc:12:10: fatal error: google/protobuf/wire_format_lite_inl.h: No such file or directory
12 | #include <google/protobuf/wire_format_lite_inl.h>
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
Fix this error by setting PROTOBUF_UPDATE_FILES to ON
Fixes:
- http://autobuild.buildroot.org/results/219258c90709fc34748929f1dcdf4f0649215e61
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ad6a0d0d65)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
Program terminated with signal SIGSEGV, Segmentation fault.
#0 xkb_state_key_get_layout (state=state@entry=0x0, kc=kc@entry=50) at ../src/state.c:217
Program terminated with signal SIGSEGV, Segmentation fault.
#0 XkbKey (kc=kc@entry=45, keymap=0x0) at ../src/keymap.h:430
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 75fbc58f3f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libbfd library provided by binutils unfortunately changed its API
in binutils >= 2.34. This is causing some build failures at the moment
on architectures such as ARC that are using a very recent binutils
version, but it would also cause build failures on other architectures
once they start using binutils 2.34.
We fix this build issue by backporting an upstream oprofile
patch. However, this patch touches configure.ac, which means we need
to autoreconf, which needs another fix in configure.ac for autoreconf
to succeed.
With all that in place, this commit fixes:
http://autobuild.buildroot.net/results/583d281c6cd2aecb65556080b379db24101ae3a8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8883b8387a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
daemon/gvfsdaemon.c in gvfsd from GNOME gvfs before 1.38.3, 1.40.x
before 1.40.2, and 1.41.x before 1.41.3 opened a private D-Bus server
socket without configuring an authorization rule. A local attacker could
connect to this server socket and issue D-Bus method calls. (Note that
the server socket only accepts a single connection, so the attacker
would have to discover the server and connect to the socket before its
owner does.)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a9f38acbf2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2.
daemon/gvfsbackendadmin.c mishandles a file's user and group ownership
during move (and copy with G_FILE_COPY_ALL_METADATA) operations from
admin:// to file:// URIs, because root privileges are unavailable.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fc42ac086a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2.
daemon/gvfsbackendadmin.c mishandles file ownership because setfsuid is
not used.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 062d0f6913)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An issue was discovered in GNOME gvfs 1.29.4 through 1.41.2.
daemon/gvfsbackendadmin.c has race conditions because the admin backend
doesn't implement query_info_on_read/write.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit e49aa31f5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An incorrect permission check in the admin backend in gvfs before
version 1.39.4 was found that allows reading and modify arbitrary files
by privileged users without asking for password when no authentication
agent is running. This vulnerability can be exploited by malicious
programs running under privileges of users belonging to the wheel group
to further escalate its privileges by modifying system files without
user's knowledge. Successful exploitation requires uncommon system
configuration.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 346040e269)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add double quotes around the $@ variable to prevent word splitting.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: s/globbing/word splitting/]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 30b6db05cb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build with gcc-10, by backporting an upstream patch:
programs/ld-ctype.c:855:18: error: array subscript 0 is outside the bounds of an interior zero-length array ‘unsigned char[0]’ [-Werror=zero-length-bounds]
855 | replace[0].bytes[0] = '?';
| ~~~~~~~~~~~~~~~~^~~
Fixes: #12711
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: slight reword in commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 13cc36dcfe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libical allows remote attackers to cause a denial of service
(use-after-free) and possibly read heap memory via a crafted ics file.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 69b51259a2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An issue was discovered in Pure-FTPd 1.0.49. An uninitialized pointer
vulnerability has been detected in the diraliases linked list. When the
*lookup_alias(const char alias) or print_aliases(void) function is
called, they fail to correctly detect the end of the linked list and try
to access a non-existent list member. This is related to init_aliases in
diraliases.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1d8426b32c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-7105: async.c and dict.c in libhiredis.a in hiredis
through 0.14.0 allow a NULL pointer dereference because malloc return
values are unchecked.
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40bc86afe9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
386: Prevents arbitrary code execution during python/object/new
constructor
https://github.com/yaml/pyyaml/pull/386
The hash of the license file changed due to the following diff:
-Copyright (c) 2017-2019 Ingy döt Net
+Copyright (c) 2017-2020 Ingy döt Net
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9063df44da)
[Peter: mention security impact]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It was searching for CONFIG_ASH=y and CONFIG_HUSH=y at $(@D)/.config,
which does not contain the package build path at the target-finalize
step. Use $(BUSYBOX_DIR), instead.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9ab1d565ee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The aarch64 compile uses the sys/auxv.h header which is not
provided by uclibc-ng. Add configure.ac patch to check for
the header before using it in ext/standard/crc32.c.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=12626
build/php-7.4.3/ext/standard/crc32.c:26:12: schwerwiegender Fehler: sys/auxv.h: Datei oder Verzeichnis nicht gefunden
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 16e0bf6b9f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(TARGET_DIR)/usr/share/collectd/postgresql_default.conf
should not be removed when postgresql support is enabled,
as that module tries to load that file by default.
Signed-off-by: Pascal de Bruijn <p.debruijn@unilogic.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 35e845700f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The v3d driver for arm uses neon instructions unconditionally, so
depend on BR2_ARM_CPU_HAS_NEON.
Fixes:
http://autobuild.buildroot.net/results/66c4df4ee84b73160dde5fe4437b5abdbd2b50d2
[1050/1079] Compiling C object 'src/gallium/drivers/v3d/99241e4@@v3d_neon@sta/v3d_tiling.c.o'.
{standard input}: Assembler messages:
{standard input}:417: Error: selected processor does not support `vldm r6,{q0,q1,q2,q3}' in ARM mode
{standard input}:418: Error: selected processor does not support `vst1.8 d0,[r4],r5' in ARM mode
{standard input}:419: Error: selected processor does not support `vst1.8 d1,[r4],r5' in ARM mode
{standard input}:420: Error: selected processor does not support `vst1.8 d2,[r4],r5' in ARM mode
{standard input}:421: Error: selected processor does not support `vst1.8 d3,[r4],r5' in ARM mode
{standard input}:422: Error: selected processor does not support `vst1.8 d4,[r4],r5' in ARM mode
{standard input}:423: Error: selected processor does not support `vst1.8 d5,[r4],r5' in ARM mode
{standard input}:424: Error: selected processor does not support `vst1.8 d6,[r4],r5' in ARM mode
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ff00c284c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add mesa3d patch to add a vc4 option to disable
the optional neon support and set it dependent
on BR2_ARM_CPU_HAS_NEON.
Fixes:
http://autobuild.buildroot.net/results/6387b0a99e1a0922811919623d9a10b0943988df
[1086/1254] Compiling C object 'src/gallium/drivers/vc4/691f666@@vc4_neon@sta/vc4_tiling_lt_neon.c.o'.
{standard input}: Assembler messages:
{standard input}:334: Error: selected processor does not support `vldm r4,{q0,q1,q2,q3}' in ARM mode
{standard input}:335: Error: selected processor does not support `vst1.8 d0,[r3],r2' in ARM mode
{standard input}:336: Error: selected processor does not support `vst1.8 d1,[r3],r2' in ARM mode
{standard input}:337: Error: selected processor does not support `vst1.8 d2,[r3],r2' in ARM mode
{standard input}:338: Error: selected processor does not support `vst1.8 d3,[r3],r2' in ARM mode
{standard input}:339: Error: selected processor does not support `vst1.8 d4,[r3],r2' in ARM mode
{standard input}:340: Error: selected processor does not support `vst1.8 d5,[r3],r2' in ARM mode
{standard input}:341: Error: selected processor does not support `vst1.8 d6,[r3],r2' in ARM mode
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 85c95e3614)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package installs a kernel module, it is currently not possible to
have it loaded with modprobe or when the kernel requests an alias for
it, as the module is not listed in /lib/modules/<kernel-version>/modules.dep
and the associated files.
So, we need to run depmod after all packages are installed, to register
any such out-of-tree module.
This means we should be able to let go of calling depmod at the time the
kernel is installed, but if we pass an invalid command, the kernel
whines:
DEPMOD 5.4.27
./scripts/depmod.sh: 46: /dev/null: Permission denied
make[2]: *** [Makefile:1326: _modinst_post] Error 126
This is because the kernel does not directly call to depmod, but uses a
wrapper that is not happy if depmod is not depmod.
Since the call to depmod does not cost much, we just keep it.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[yann.morin.1998@free.fr:
- keep calling depmod when installing kernel
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 82e7656400)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-0556: Improper access control in subsystem for BlueZ before
version 5.54 may allow an unauthenticated user to potentially enable
escalation of privilege and denial of service via adjacent access
https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00352.html
Changes since version 5.52:
5.54:
Fix issue with HOGP to accept data only from bonded devices.
Fix issue with A2DP sessions being connected at the same time.
Fix issue with class UUID matches before connecting profile.
Add support for handling MTU auto-tuning option for AVDTP.
Add support for new policy for Just-Works repairing.
Add support for Enhanced ATT bearer (EATT).
5.53:
Fix issue with handling unregistration for advertisment.
Fix issue with A2DP and handling recovering process.
Fix issue with udpating input device information.
Add support for loading blocked keys.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3a678c952f)
[Peter: mention security issue]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The C program inside check-kernel-headers.sh has two checking mode: a
strict and a loose one.
In strict mode, we want the kernel headers version declared by the
user to match exactly the one of the toolchain.
In loose mode, we want the kernel headers version of the toolchain to
be greater than or equal to the one declared by the user: this is used
when we have a toolchain that has newer headers than the latest
version known by Buildroot.
However, in loose mode, we continue to show the "Incorrect kernel
headers version" message, even though we then return a zero error
code. This is very confusing: you see an error displayed on the
terminal, but the build goes on.
We fix that by first doing the loose check first, and returning 0 if
it succeeds. And then we move on with the strict check where we want
the version to be identical.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c3c4b3dfa8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The external toolchain configure step calls the
check_kernel_headers_version make function to compare the kernel
headers version declared in the configuration with the actual kernel
headers of the toolchain.
This function takes 4 arguments, but due to a missing comma what
should be the first two arguments are both passed into the first
argument. Due to this, when check_kernel_headers_version does:
if ! support/scripts/check-kernel-headers.sh $(1) $(2) $(3) \
$(if $(BR2_TOOLCHAIN_HEADERS_LATEST),$(4),strict); \
Then:
$(1) contains "$(BUILD_DIR) $$(call toolchain_find_sysroot,$$(TOOLCHAIN_EXTERNAL_CC))"
$(2) contains "$$(call qstrip,$$(BR2_TOOLCHAIN_HEADERS_AT_LEAST))"
$(3) contains "$$(if $$(BR2_TOOLCHAIN_EXTERNAL_CUSTOM),loose,strict))"
So from the point of view of check-kernel-headers.sh, it already has
four arguments, and therefore the additional argument passed by:
$(if $(BR2_TOOLCHAIN_HEADERS_LATEST),$(4),strict); \
is ignored, defeating the $(BR2_TOOLCHAIN_HEADERS_LATEST) test.
The practical consequence is that a toolchain that has 5.4 kernel
headers but declared as using 5.3 kernel headers does not abort the
build, because the check is considered "loose" while it should be
"strict".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 96f8d0bb46)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Post-build scripts may want to do something based on the list of files
installed by a package. However, since commit
0e2be4db8a the final packages-file-lists.txt
file is only created _after_ the post-build scripts.
Move the assembly of the file lists upwards, before the post-build scripts.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d4d52d907b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a package sets a FOO_SUBDIR (meaning its sources are not under
output/build/foo-123 but under output/build/foo-123/$(FOO_SUBDIR)), the
.files-list.txt file were also created under FOO_SUBDIR, due to which the
logic in the Makefile would not find it.
Change the instrumentation steps so that the file list is directly under the
package dir, ignoring the subdir.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9f876c7f16)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In very limited configurations, it is possible to have a case where no
.files-list-staging.txt files are created. In this case:
cat $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt)) > \
$(BUILD_DIR)/packages-file-list-staging.txt
becomes:
cat > \
$(BUILD_DIR)/packages-file-list-staging.txt
which of course makes the build hang.. forever.
So we fix this by checking the list is not empty. To keep the code
readable, we introduce an intermediate variable to store the list of
these files.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[yann.morin.1998@free.fr: always create the file, even if empty]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit aa1e74745c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Radvd has its own main(), and does not use yywrap() from libfl.so,
because scanner.l module contains noyywrap option. So, none of the
functions exported by libfl.so are used, and there's no need to have
the flex runtime on target.
Signed-off-by: Alexander Mukhin <alexander.i.mukhin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6274868bd1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When barebox, and thus barebox-aux, are downloaded from a git tree, then
barebox-aux download fails because a hash check is attempted on the
downloaded archive:
Could not fetch special ref 'v2020.03.0'; assuming it is not special.
ERROR: No hash found for barebox-aux-v2020.03.0.tar.gz
This is because we only exclude from the check the archive of the bare
barebox:
BR_NO_CHECK_HASH_FOR += $(BAREBOX_SOURCE)
However, the default name of an archive is based on the package name,
which for barebox-aux is not 'barebox'.
Since barebox-aux really uses the exact same source as the bare barebox,
it should also share the archive name.
This has two direct consequences and advantages:
- the hash check is completely avoided for the barebox-aux archive;
- the barebox-aux archive is not downloaded as it is already
downloaded for barebox.
Reported-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 451ee6fa54)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perf auto-detects and uses the libbfd (from binutils) and openssl
libraries if they are detected and happen to be built before perf is,
but if they're not, or if per-package directories are enabled, it won't
detect these libraries. Explicitly add dependencies on these packages if
they are enabled, and disable the feature if not, so that the behavior
is deterministic.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 013cc68bf7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
https://raw.githubusercontent.com/antirez/redis/5.0/00-RELEASENOTES
================================================================================
Redis 5.0.8 Released Thu Mar 12 16:05:41 CET 2020
================================================================================
Upgrade urgency HIGH: This release fixes security issues.
[FIX] revisit CVE-2015-8080 vulnerability
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit caed3878a6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LLVM builds bindings for other languages such as Go and OCaml when the
appropriate dependencies can be found. We currently don't support
building these bindings in Buildroot, as they're currently unused by any
package.
Building these bindings was originally disabled by overriding the
dependencies with values indicating that they were not found.
Newer versions of LLVM no longer disable the OCaml bindings when overriding
OCAMLFIND. Consequently, the build process attempts to install the bindings
to the default location on the host of /usr/lib/ocaml/llvm, causing a
permissions error and build failure.
Additionally, LLVM has since added the variable LLVM_ENABLE_BINDINGS to
control whether bindings are enabled, so we override that to disable the
bindings.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e6a1ee9a8a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The initramfs is not a reall filesystem, so it does not use the
$(rootfs) infrastructure.
As a consequence, the usual rootfs-related variables are not set,
especially the name, type, and dependencies of the (non-)filesystem.
Yet, it is present in the list of rootfs to build, and thus we end
up including it in the output of show-info. But the missing variables
yield an incorrect json:
"": {
"type": "",
"virtual": false,
"version": "",
"licenses": "",
"dl_dir": "",
"install_target": ,
"install_staging": ,
"install_images": ,
"downloads": [ ],
"dependencies": [ ],
"reverse_dependencies": [ ]
},
First, the object key is empty; second, the install_target,
install_staging, and install_images values are empty, which is not
valid (if they were null, that be OK though). Third, this is clearly
the layout of a 'package' entry, not that of a 'rootfs' entry.
An option to fix that would be to actually make use of the rootfs
infra. However, that would mean doing a lot of work for nothing
(there is actually nothing to do, yet the infra would still do a lot
of preparatory and clean up work).
The alternative is pretty simple: declare and set the variables as if
it were a real filesystem, so that show-info can filter it to the
proper layout and can spit out appropriate content (even if fake).
The third option would be to teach show-info (and its internal
implementation, the macro json-info) to ignore specific cases, like
no-name items, or replace empty values with null, or whatnots. This
again would be quite a lot of work for a single occurence.
So we go for the simple faked variables.
We add linux as a dependency, so that the graph-depends also properly
represent the dependency chain, which ends up with something liKe:
ALL
|
v
rootfs-initramfs
| |
v v
linux rootfs-cpio
which is pretty fitting in the end.
Reported-by: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b42db7db9f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some ATF configurations, such as the ones for the STM32MP1 processor
family, require DTC during the build as Device Tree files are
used. Without dtc, the build fails:
/bin/sh: 1: dtc: not found
dtc version too old (), you need at least version 1.4.4
plat/st/stm32mp1/platform.mk:239: recipe for target 'check_dtc_version' failed
make[1]: *** [check_dtc_version] Error 1
To solve this, this commit implements a
BR2_TARGET_ARM_TRUSTED_FIRMWARE_NEEDS_DTC option, in a way that mimics
the BR2_TARGET_UBOOT_NEEDS_DTC option we already have for the U-Boot
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ddbb5dbd83)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
localedef needs bison to satisfy a .y.c rule to generate a parser for
plural forms, to ultimately generate data for the target. So we do not
want to depend on the host-provided bison; we want to build our own (for
reproducibility).
localedef is a host-only package, and dependencies are not inherited
from the target variant, so we need to make them explicit host
dependencies.
And move the assignment after all the download-related variables.
Reported-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit af90a104c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With BR2_PER_PACKAGE_DIRECTORIES=y, we have the following code in the
main Makefile:
target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
@$(call MESSAGE,"Finalizing target directory")
$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
The per-package-rsync call creates the global $(TARGET_DIR) from the
per-package $(TARGET_DIR). Then, we call the TARGET_FINALIZE_HOOKS.
One of the TARGET_FINALIZE_HOOKS, PURGE_LOCALES, remove locales that
are not desired by the user. It does so using a loop with the
$(wildcard ...) function.
However, the $(wildcard ...) function is expanded at the moment the
rule is evaluated. And with per-package directory, at the time the
rule is evaluated, the global $(TARGET_DIR) is empty, so $(wildcard
...) will return nothing. It is indeed only after the call to
per-package-rsync that the TARGET_DIR will be populated.
This commit fixes that by moving away from $(wildcard ...) and use a
shell test instead, since we are anyway in big block of shell code.
With this, locales are properly purged again when
BR2_PER_PACKAGE_DIRECTORIES=y.
Fixes: c4e6d5c8be ("core: implement per-package SDK and target")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- make the style look like the code around (no space in front of ;)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 658a80ec73)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If syslog-ng is selected in Buildroot and net-snmp is not, but net-snmp is
found on the host machine (at least its net-snmp-config script) then
compilation of syslog-ng fails with:
CC modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-grammar.lo
CC modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest.lo
CC modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-plugin.lo
arm-none-linux-gnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include'
make[3]: *** [Makefile:17397: modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-grammar.lo] Error 1
make[3]: *** Waiting for unfinished jobs....
arm-none-linux-gnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include'
make[3]: *** [Makefile:17404: modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest.lo] Error 1
arm-none-linux-gnueabi-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include'
make[3]: *** [Makefile:17411: modules/snmp-dest/modules_snmp_dest_libsnmpdest_la-snmpdest-plugin.lo] Error 1
make[2]: *** [Makefile:21428: all-recursive] Error 1
make[1]: *** [Makefile:8740: all] Error 2
make[1]: Leaving directory '.../buildroot/output/build/syslog-ng-3.25.1'
make: *** [package/pkg-generic.mk:269: .../buildroot/output/build/syslog-ng-3.25.1/.stamp_built] Error 2
The path /usr/include is obtained via /usr/bin/net-snmp-config.
The fix comprises two parts:
1. only enable net-snmp support in syslog-ng if the net-snmp package is
enabled in Buildroot
2. for the case where net-snmp is selected in Buildroot, fix the configure
script of syslog-ng to allow parsing --with-netsnmp=<path> correctly.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4ff6e52392)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 0e2be4db8a
("package/pkg-generic: make file list logic parallel build
compatible"), the logic to create the list of files installed by a
particular package was significantly reworked to be compatible with
top-level parallel build.
Before this commit, there was only a after-install step of listing the
files in HOST_DIR/TARGET_DIR/STAGING_DIR. But after this commit, we
now have a before-install logic and an after-install logic.
It turns out that when the before-install logic is called for the very
first host package, $(HOST_DIR) doesn't exist yet, and therefore the
cd $(2) fails, with an error message:
/bin/sh: line 0: cd: /home/thomas/buildroot/output/host: No such file or directory
In fact, $(HOST_DIR), $(STAGING_DIR), $(TARGET_DIR) and
$(BINARIES_DIR) are created by the make rules for host installation,
staging installation, target installation and images installation, but
*after* calling the step_start hooks.
So, we simply fix this problem by creating the directories *before*
calling the step_start hooks.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c84ce1f98c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch to fix double-conversion compile for xtensa
and drop dependency on !BR_xtensa.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 572b25c0d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use "--exec-prefix=/" to install syslogd and klogd at /sbin, as required
by the init scripts. This also ensures that the BusyBox counterparts are
not installed.
Update the systemd unit files, accordingly.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 33642d8d95)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without linux-pam built first, polkit will throw a configuration error:
configure: error: Could not find pam/pam-devel, please install the needed packages.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 35a0878aa9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, vapi support does not work with meson due to meson calling vapigen
directly instead of the vala wrapper. As such, when building typelib files for
gobject-introspection, vapigen fails to find the proper .gir files and fails
to build.
Explicitly disable vapi until a fix for vapi is made.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9de3b9c094)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is required that all patches in packages have the Signed-off-by of
the contributor who brought them into Buildroot.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 94784f092b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building a toolchain with upstream gcc 9.x the build
fail due to several issues.
Note: The upstream Binutils support csky target since
release 2.32 but the support was never enabled in the
Buildroot packaging. So the latest version (2.33.1) was
tested here.
[upstream gcc 9.x w/ glibc csky fork with binutils csky for or binutils 2.33.1]
In file included from <command-line>:
./../include/libc-symbols.h:534:26: error: '__EI___errno_location' specifies less restrictive attributes than its target '__errno_location': 'const', 'nothrow' [-Werror=missing-attributes]
534 | extern __typeof (name) __EI_##name \
[upstream gcc 9.x w/ glibc 2.30 w/ binutils csky fork]
/tmp/ccThLRhb.s: Assembler messages:
/tmp/ccThLRhb.s:10: Error: invalid or unsupported encoding in .cfi_personality
/tmp/ccThLRhb.s:11: Error: invalid or unsupported encoding in .cfi_lsda
[upstream gcc 9.x w/ glibc 2.30 w/ binutils 2.33.1]
build/elf/librtld.os: in function `__sync_fetch_and_add_2':
libgcc/config/csky/linux-atomic.c:116: undefined reference to `__kernel_cmpxchg'
Currenlty, only the toolchain using binutils, gcc, glibc
fork produce a working toolchain. So disable gcc 9.x for
csky.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Guo Ren <guoren@kernel.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7542a59601)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If multiple entries are specified for _MESON_EXTRA_BINARIES, the current
sed expression will only replace the first one.
Specifically, from GNU sed 4.8 the manual says:
/regexp/
Match lines matching the regular expression regexp. Matching
is performed on the current pattern space, which can be modified
with commands such as ``s///''.
so after the first binary has been added, the next entry no longer
matches since the pattern space has been modifed.
Instead of adding a script for each value, apply the match once and add
a subsitution for all entries at once.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: do a single substitution]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a1e3c7b693)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The values in the cross-compilation file are expected to be quoted with
single quotes, which we have in our template.
However, the endian value we are injecting comes from Kconfig, so it is
double-quoted, and those quotes end up in the cross-compilation files we
generate (the internal one, and the SDK one):
endian = '"little"'
So qstrip the value before we inject it.
Propagate the fix to the two generated files by using the same variable
HOST_MESON_TARGET_ENDIAN in both cases, rather than replicating the
(flawed) logic.
While at it, also use the common GCC_TARGET_CPU variable for the SDK
file too.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 92eca65ddf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$$(STAGING_DIR) -> $(STAGING_DIR) in PKG_MESON_INSTALL_CROSS_CONF.
$$ resulted in `$(STAGING_DIR)` in the file instead of the expanded
value.
Note that this change only affects the etc config at:
host/etc/meson/cross-compilation.conf
Per-package cross-compilation.conf files are already correct.
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3fb784afb1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
if test "${mesontimer}"="0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
if test "${mesontimer}"="1"; then fdt rm /timer; fi
if test "${nographics}"="1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
if test "${nographics}"="1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
if test "${nographics}"="1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
if test "${nographics}"="1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
From 7d68fa68cd9f2987bd85339f3391913a8b0e58c7 Mon Sep 17 00:00:00 2001
From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Date: Tue, 24 Mar 2020 10:21:27 +0100
Subject: [PATCH] efi/main.c: include <efisetjmp.h>
MIME-Version: 1.0
Content-Type: text/plain; charset=UTF-8
Content-Transfer-Encoding: 8bit
Building syslinux against gnu-efi 3.0.10 currently fails with:
syslinux/efi/main.c:33:8: error: unknown type name ‘jmp_buf’
33 | static jmp_buf load_error_buf;
| ^~~~~~~
syslinux/efi/main.c: In function ‘local_boot’:
syslinux/efi/main.c:189:5: warning: implicit declaration of function ‘longjmp’ [-Wimplicit-function-declaration]
189 | longjmp(&load_error_buf, 1);
| ^~~~~~~
syslinux/efi/main.c: In function ‘build_gdt’:
syslinux/efi/main.c:907:75: warning: taking address of packed member of ‘struct dt_desc’ may result in an unaligned pointer value [-Waddress-of-packed-member]
907 | status = emalloc(gdt.limit, __SIZEOF_POINTER__ , (EFI_PHYSICAL_ADDRESS *)&gdt.base);
| ^~~~~~~~~
syslinux/efi/main.c: In function ‘efi_main’:
syslinux/efi/main.c:1390:7: warning: implicit declaration of function ‘setjmp’ [-Wimplicit-function-declaration]
From c245b576aad09ac5faeb800de7f7c4fef87c6363 Mon Sep 17 00:00:00 2001
From: Tom Callaway <spot@fedoraproject.org>
Date: Fri, 31 Jan 2020 12:40:45 +0000
Subject: [PATCH] Fix build with gcc 10 (which has -fno-common enabled by
default).
EFL failed to build from source in Fedora Rawhide as a result of the update to GCC 10. GCC 10 enables -fno-common by default, and this found three issues in EFL:
# The eina benchmark code defined int key_size in a header that was included in multiple places.
#/usr/bin/ld: bin/elementary/elementary_test-test_ui_clock.o:(.bss.dt1+0x0): multiple definition of `dt1'; bin/elementary/elementary_test-test_datetime.o:(.bss.dt1+0x0): first defined here
The elementary test code defines the "dt1", "dt2", "dt3" vars in two code files which are compiled together (but these variables do not appear to be used globally)
# The eio test code defines the "ee" var in two code files which are compiled together (but this variable does not appear to be used globally)
I've fixed these issues and confirmed locally that the code builds again in Fedora.
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(eirecv.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(send.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(send_reg.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(epmd_port.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
ld: otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_portio.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: multiple definition of `ei_default_socket_callbacks'; otp/lib/erl_interface/obj/x86_64-unknown-linux-gnu/libei.a(ei_connect.o):otp/lib/erl_interface/src/misc/ei_portio.h:50: first defined here
device. It then monitors the device and displays all the
events layer events generated.
http://cgit.freedesktop.org/evtest
https://gitlab.freedesktop.org/libevdev/evtest
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
