Commits 495e757d2 (package/dtc: add optional libyaml dependency) and
e43d9072a (package/dtc: fix build without libyaml), added a conditional
dependency to host-pkgconf, when libyaml is enabled, while commit
56d6dd453 (package/dtc: disable valgrind) explicitly disabled support of
valgrind.
However, presence of libyaml, as well as that of valgrind, *is* detected
by calling pkg-config:
NO_VALGRIND := $(shell $(PKG_CONFIG) --exists valgrind; echo $$?)
NO_YAML := $(shell $(PKG_CONFIG) --exists yaml-0.1; echo $$?)
Passing NO_YAML=1 or NO_VALGRIND=1 do not prevent the tests from being
executed, which would yield messages like:
/bin/sh: 1: /home/ymorin/dev/buildroot/O/host/bin/pkg-config: not found
(note however that, even if the test is executed, the value we pass on
the command line still takes precedence, and the support for either is
properly disabled.)
So, move the dependency on host-pkgconfig out of the condition. Ditto
for the host package.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Titouan Christophe <titouan.christophe@railnova.eu>
Cc: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 78b77a5c4a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package specifies extra downloads, it has the option to only name
the basename of the extra download, in which case that extra download
will be retrieved from the same location the main download is retrieved
from.
In that case, if the extra download contains a '+', it would confuse the
dl-wrapper, which believes the LHS of the '+' is the site method, and
the RHS the actual URI, and so the dl-wrapper mangles and damages the
URI when fetching such extra downloads, like that happens with android
tools, where the proper URI and mangled URIs of the extra download are,
respectively:
https://launchpad.net/ubuntu/+archive/primary/+files/android-tools_4.2.2+git20130218-3ubuntu41.debian.tar.gzhttp://archive/primary/+files/android-tools_4.2.2+git20130218-3ubuntu41.debian.tar.gz
We fix that by always propagating the site method to extra downloads,
but only when they are specified as relative to the main download URI.
For the extra downloads that specify a full URI, it is not systematic
that it is the same site method. For example, a main download could be a
git clone, but an extra download a pure http download; in that case we
can't replicate the site method for extra downloads, so they'll have to
take appropriate care to specify the required method and encoding if
needed.
Reported-by: Jemy Zhang <jemy.zhang@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jemy Zhang <jemy.zhang@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2c543b4f4c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The name of the option to enable/disable support for pulseaudio has been
in flux in FreeRDP, sometimes being WITH_PULSE, sometimes being the
erroneous WITH_PULSEAUDIO. Eventually, FreeRDP came to their feet, and
fixed it to WITH_PULSE everywhere.
Signed-off-by: Alexey Lukyanchuk <skif@skif-web.ru>
[yann.morin.1998@free.fr:
- remove useless (obsolete) WITH_PULSEAUDIO
- fix the else clause too
- enhance commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 807495a885)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current URL from which we download the yaffs2utils tarball no
longer works:
-2019-11-02 10:17:20-- https://yaffs2utils.googlecode.com/files/0.2.9.tar.gz
Resolving yaffs2utils.googlecode.com (yaffs2utils.googlecode.com)... 2a00:1450:400c:c02::52, 173.194.76.82
Connecting to yaffs2utils.googlecode.com (yaffs2utils.googlecode.com)|2a00:1450:400c:c02::52|:443... connected.
HTTP request sent, awaiting response... 404 Not Found
2019-11-02 10:17:20 ERROR 404: Not Found.
So, let's replace it with a working URL.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 41f4c85dd0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eudev and systemd provide a hardware database (hwdb) as a set of
multiple files. Various other utilities may also use that database.
Those files have to be "compiled" into a binary to be useful; libudev
(and thus all utilities based on it) only use the compiled hwdb.
Compiling the hwdb is done with udevadm, using the hwdb sub-command:
udevadm hwdb --update
Provide a simple host-variant of eudev, so that we can call udevadm at
build time.
When it is configured, eudev will shoehorn its --prefix path as the base
location where the .hwdb file will be searched from, as well as where
the hwdb.bin will be generated in. This means that with the usual
--prefix=$(HOST_DIR), it would look into there.
udevadm also accepts a --root=/path option at runtime, which prepends
/path to all the paths it uses to find and generate files.
Obviously, combining --root=$(TARGET_DIR) and --prefix=$(HOST_DIR) would
not do what we want: all files would be searched for, and generated, in
$(HOST_DIR)$(TARGET_DIR)/ . Avoiding use of --root would not help much
either, as files would still searched in $(HOST_DIR) (we could use a
trick to copy files there, generate and then move the hwdb.bin, but
that's not nice).
However, since we only need udevadm, and since udevadm has no internal
and no external dependency, we can use a less dirty trick and configure
host-eudev with --prefix=/usr (and similar for the other paths), manually
copy udevadm to HOST_DIR, and then use --root when calling it.
Then, we get a udevadm that can read files from, and generate files into
$(TARGET_DIR). We register a target-finalize hook to generate the
hwdb.bin, so that any pakage may install its .hwdb files (currently only
eudev and systemd do, but other packages might (e.g. sane is known to do
so on standard desktop distros))
The *.hwdb source files consume a lot of space, roughly the same as the
generated database, i.e. ~8MiB as of today, and they are totally useless
on the target; only the generated hwdb.bin is useful. So we want to get
rid of them.
However, we also want to be able to complete a build (e.g. make
foo-reinstall to reinstall more hwdb files), so we don't want to
irremediably lose them. As such, we register a pre-rootfs-cmd hook, that
removes them just before assembling the filesystems, when we're only
using a copy of the target directory.
Note that this is the first host package to register a target-finalize
hook, and also the first to register a pre-rootfs-cmd hook. This avoids
duplicating these hooks logic in both eudev and systemd.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c2fee90943)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The indirect dependency through kmod was not tracked.
Detected with randconfig.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0c768dbbd9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The indirect dependency via python-cryptography was not set in the
Config.in.
Detected with randconfig.
And propagate this to the reverse dependencies.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Peter: also propagate to the reverse dependencies]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a0e9caf40d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fakeroot can be built to either use SYSV IPC or TCP for message passing.
A bug was discovered where Microsoft Windows 10 Services for Linux
doesn't include support for SYSV IPC MsgQ. This patch adds support to
detect this case and automatically build fakeroot to use the TCP
transport instead (It is assumed a TCP transport would definitely have
more overhead then MsgQs so the default wasn't changed to TCP).
Fixes
https://bugs.busybox.net/show_bug.cgi?id=11366
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Jean-Francois Doyon <jfdoyon@gmail.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Arnout: use a post-patch hook and AUTORECONF=YES]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit fd1bcce989)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- bpo-38243: Escape the server title of xmlrpc.server.DocXMLRPCServer when
rendering the document page as HTML. (Contributed by Dong-hee Na in
bpo-38243.)
- bpo-38174: Update vendorized expat library version to 2.2.8, which
resolves CVE-2019-15903.
- bpo-37764: Fixes email._header_value_parser.get_unstructured going into an
infinite loop for a specific case in which the email header does not have
trailing whitespace, and the case in which it contains an invalid encoded
word. Patch by Ashwin Ramaswami.
- bpo-37461: Fix an infinite loop when parsing specially crafted email
headers. Patch by Abhilash Raj.
- bpo-34155: Fix parsing of invalid email addresses with more than one @
(e.g. a@b@c.com.) to not return the part before 2nd @ as valid email
address. Patch by maxking & jpic.
Additionally, the release contains a number of non-security related fixes.
For details, see the changelog:
https://docs.python.org/3.7/whatsnew/changelog.html#python-3-7-5-final
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iconv.h is always included by mz_os_posix.c so select
BR2_PACKAGE_LIBICONV if !BR2_ENABLE_LOCALE
Fixes:
- No autobuilder failures
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 19806dab03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a security release in order to address the following defects:
o CVE-2019-10218: Client code can return filenames containing path
separators.
o CVE-2019-14833: Samba AD DC check password script does not receive
the full password.
o CVE-2019-14847: User with "get changes" permission can crash AD DC
LDAP server via dirsync.
Release notes: https://www.samba.org/samba/history/samba-4.10.10.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 22bb800a4f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsigrok optionally depends on libftdi1, not libftdi. This was already
the case for a long time, but until the recent commit 01b30e5d69, all
the configure options were wrong so it would use the automatic check for
availability of libftdi1. Now we pass the --with-libftdi option
explicitly, configure will fail if libftdi1 is not available.
Fixes:
- http://autobuild.buildroot.net/results/ec1f9f57944139b24738c1be529c4fc4b128a516
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 658388138c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
m68k does not seem to really support PIE as it raises the following
build failure with aer-inject:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/7.4.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/host/m68k-buildroot-linux-uclibc/sysroot/usr/lib/Scrt1.o: in function `lib_main':
(.text+0x4): undefined reference to `__shared_flat_add_library'
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-1/output/host/opt/ext-toolchain/bin/../lib/gcc/m68k-buildroot-linux-uclibc/7.4.0/../../../../m68k-buildroot-linux-uclibc/bin/ld: final link failed: bad value
We also have another build failure with uclibc on microblazeel:
/home/buildroot/autobuild/instance-1/output-1/host/lib/gcc/microblazeel-buildroot-linux-uclibc/8.3.0/../../../../microblazeel-buildroot-linux-uclibc/bin/ld: final link failed: bad value
collect2: error: ld returned 1 exit status
Makefile.in:114: recipe for target '../utils/getconf' failed
So add a BR2_TOOLCHAIN_SUPPORTS_PIE dependency on BR2_PIC_PIE
Fixes:
- http://autobuild.buildroot.net/results/4cdd6f0368cc9d3c6e88f01b1a8929eb0839b638
- http://autobuild.buildroot.net/results/a82a484409149d7f9aff6140ddcb89f627f508c7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit de3fa43891)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues (1.12.11):
- CVE-2019-17596: Invalid DSA public keys can cause a panic in dsa.Verify.
In particular, using crypto/x509.Verify on a crafted X.509 certificate
chain can lead to a panic, even if the certificates don’t chain to a
trusted root. The chain can be delivered via a crypto/tls connection to a
client, or to a server that accepts and verifies client certificates.
net/http clients can be made to crash by an HTTPS server, while net/http
servers that accept client certificates will recover the panic and are
naffected.
Additionally, 1.12.11 fixes a number of issues. From the release notes:
fixes to the go command, runtime, syscall and net packages.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 2c8ff251cb ("boot/uboot: add
option to generate env image from default env"), the possibility of
generating an environment image using the built-in U-Boot environment
as a source was added.
This is meant to happen when the string option
BR2_TARGET_UBOOT_ENVIMAGE_SOURCE is empty, but the original commit
added the Config.in help text to BR2_TARGET_UBOOT_ENVIMAGE, which is a
boolean option, and therefore cannot be empty.
Move the help text to BR2_TARGET_UBOOT_ENVIMAGE_SOURCE, where it
belongs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f9ab00ba46)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix several issues with systemd service file installation for gpsd:
- systemd support in the gpsd build was defaulting to enabled or not
based on whether the host system had systemd directories present. Set
this explicitly based on whether BR2_INIT_SYSTEMD is set.
- The installed systemd service files referenced paths in /usr/local when
the actual binaries are installed in /usr. Replace /usr/local with /usr
in the installed service files.
- When BR2_PACKAGE_HAS_UDEV was enabled, all of the binaries were
re-installed again, along with the udev rules, as part of the
post-install hooks. This overwrites the service files that were just
fixed up. Since udev-install implies install, we can just call
udev-install.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 690222d239)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"mount" from the "util-linux" package does expect the helper utilities
in "/sbin" and not "/usr/sbin". We use "--exec-prefix=/" to fix the
issue. The man-pages are then still installed under "/usr/share/man".
Signed-off-by: Wolfgang Grandegger <wg@grandegger.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e7f32dc3c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
- CVE-2019-18218: cdf_read_property_info in cdf.c in file through 5.37 does
not restrict the number of CDF_VECTOR elements, which allows a heap-based
buffer overflow (4-byte out-of-bounds write).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1c4584e47e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu is required to build Q5tWebkit.
When UChar is defined as char16_t in ICU, then qtbase fails to detect ICU.
The issue is described https://bugreports.qt.io/browse/QTBUG-49586
Build fails with following error messages:
...
ustring.h:473:20: error: ‘UChar’ does not name a type
u_strCompare(const UChar *s1, int32_t length1,
^
^
make[2]: *** [Makefile:195: icu.o] Error 1
ICU disabled.
The ICU library support cannot be enabled.
Signed-off-by: Andrey Skvortsov <andrej.skvortzov@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 89a82e7210)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On x86_64, we use the host compiler instead of the target compiler to
build kvm-unit-tests, because it is built with -m32 and our target
compiler doesn't support that.
However, the compiler on Arch Linux is broken: it *always* builds with
-fstack-protector, even when -ffreestanding is passed. However, when
-fnostdlib is passed at link time (which is normally the case when
building with -ffreestanding), it is not linked with the stack-protector
library. This leads to a link time error:
/usr/bin/ld: x86/realmode.o: in function `print_serial_u32':
.../x86/realmode.c:104: undefined reference to `__stack_chk_fail'
Since the entire package is built with -ffreestanding, it doesn't
support stack-protector at all. Therefore, simply pass
-fno-stack-protector explicitly on x86_64 to work around the bug in Arch
Linux.
Bug reported upstream: https://bugs.archlinux.org/task/64270
Fixes:
- http://autobuild.buildroot.org/results/e6f767755ffdb5ecc014eb5ad7519814f075a60e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c0ffd16e40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This used to cause a build failure with gettext-tiny, but this is now
fixed by the version bump in 160f0a033b
("package/gettext-tiny: bump version"). Nevertheless, it makes sense
to not install the i18n files when they are not needed, i.e when
BR2_SYSTEM_ENABLE_NLS is disabled.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d9ed9b6d59)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Openssl is required so that Gem can install ruby gems from secure websites.
ERROR: While executing gem ... (Gem::Exception)
Unable to require openssl, install OpenSSL and rebuild ruby (preferred) or
use non-HTTPS sources
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ed5549b987)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sox implements a custom mechanism to detect whether the toolchain has
SSP suport or not. In doing so, it explicitly tries to see if libssp.so
is present, in which case it unconditionally links with it, even though
the compiler, if left by itself, would have used the SSP support
provided by the C library.
However, with Buildroot, the SSP options are handled in our gcc
wrapper, so packages should just not bother with that.
It turns out that, when sox is configured with --disable-stack-protector,
it does not disable it, but really does nothing, which is good for us.
Currently, SSP is conditionally disabled in sox, under various
conditions: that the toolchain does not have SSP, or that it is one of
the know SSP-challenged (i.e. broken) toolchains. Those conditions dates
back tpo before our wrapper started handling that.
Remove all those conditions, unconditionally disable SSP in sox, and let
our gcc wrapper handle the SSP options.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4653d273b8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In Buildroot, the internal toolchain backend uses the SSP support from
the C library, not that of gcc.
Some external toolchains come with SSP suport in gcc, which is
implemented in libssp.so, rather than in the C library.
When a toolchain even has both, it is up to the compiler to decide
whether it will link to libssp or use the support from the C library.
However, in the latter case, a (incorrectly written) package may decide
to explicitly link with libssp.so when it is available (even though the
compiler may have decided otherwise if left by itself). This is the case
for example with sox, which results in runtime failures, such as:
$ sox
sox: error while loading shared libraries: libssp.so.0: cannot open
shared object file: No such file or directory
Even if sox is wrong in doing so, the case for libssp-only toolchains is
still valid, and we must copy it as we copy other libs.
Signed-off-by: Yann Droneaud <ydroneaud@opteya.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 971479ed62)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SGI is gone (RIP). Use the github project as landing page.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f5ff55822d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes compilation issue in case memfd_create is a stub in libc.
Patch already merged in lxc master branch
(344b8ee293f4d3730a70a6ccaa03d7e4a516ae95).
Copy of the original commit log:
In case the internal memfd_create has to be used, make sure we don't
clash with the already existing memfd_create function from glibc.
This can happen if this glibc function is a stub. In this case, at
./configure time, the test for this function will return false, however
the declaration of that function is still available. This leads to
compilation errors.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0d6b305e52)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since <package>-rebuild implies <package>-reinstall and
<package>-reconfigure implies <package>-rebuild, it is confusing
to mention the make and make <package> commands when describing
the restart of the configuration, compilation and installation of
the package.
Therefore remove the ", followed by +make+ or +make <package>+"
portions in the "8.3. Understanding how to rebuild packages" section,
and add a new paragraph clarifying how to include the rebuilt package
in the filesystem image, if that is necessary.
Signed-off-by: Vivien Didelot <vivien.didelot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9155d1a38d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerablities:
- CVE-2018-1000222: Libgd version 2.2.5 contains a Double Free Vulnerability
vulnerability in gdImageBmpPtr Function that can result in Remote Code
Execution . This attack appear to be exploitable via Specially Crafted
Jpeg Image can trigger double free
- CVE-2018-5711: gd_gif_in.c in the GD Graphics Library (aka libgd), as used
in PHP before 5.6.33, 7.0.x before 7.0.27, 7.1.x before 7.1.13, and 7.2.x
before 7.2.1, has an integer signedness error that leads to an infinite
loop via a crafted GIF file, as demonstrated by a call to the
imagecreatefromgif or imagecreatefromstring PHP function
- CVE-2019-11038: When using the gdImageCreateFromXbm() function in the GD
Graphics Library (aka LibGD) 2.2.5, as used in the PHP GD extension in PHP
versions 7.1.x below 7.1.30, 7.2.x below 7.2.19 and 7.3.x below 7.3.6, it
is possible to supply data that will cause the function to use the value
of uninitialized variable. This may lead to disclosing contents of the
stack that has been left there by previous code
- CVE-2019-6978: The GD Graphics Library (aka LibGD) 2.2.5 has a double free
in the gdImage*Ptr() functions in gd_gif_out.c, gd_jpeg.c, and gd_wbmp.c
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 505a70edbe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This release fixes CVE-2019-9740, CVE-2019-9948, CVE-2019-15903.
Adjust 0002-Fix-get_python_inc-for-cross-compilation.patch for 2.7.17.
Remove the following patches (now on upstream):
* 0035-bpo-35907-CVE-2019-9948-urllib-rejects-local_file-sc.patch
* 0036-bpo-36216-Add-check-for-characters-in-netloc-that-no.patch
* 0037-3.7-bpo-36216-Only-print-test-messages-when-verbose-.patch
* 0038-bpo-36742-Fixes-handling-of-pre-normalization-charac.patch
* 0039-bpo-36742-Corrects-fix-to-handle-decomposition-in-us.patch
* 0040-2.7-bpo-36742-Fix-urlparse.urlsplit-error-message-fo.patch
* 0041-bpo-30458-Disallow-control-chars-in-http-URLs-GH-127.patch
Full release details at:
https://github.com/python/cpython/blob/v2.7.17/Misc/NEWS.d/2.7.17rc1.rst
run-tests results:
10:30:20 TestPython2 Starting
10:30:21 TestPython2 Building
10:37:37 TestPython2 Building done
10:37:47 TestPython2 Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 448.616s
OK
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7df07cb611)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On uClibc up to at least v1.0.32, syscall() for x86_64 is defined in
libc/sysdeps/linux/x86_64/syscall.S as
syscall:
movq %rdi, %rax /* Syscall number -> rax. */
movq %rsi, %rdi /* shift arg1 - arg5. */
movq %rdx, %rsi
movq %rcx, %rdx
movq %r8, %r10
movq %r9, %r8
movq 8(%rsp),%r9 /* arg6 is on the stack. */
syscall /* Do the system call. */
cmpq $-4095, %rax /* Check %rax for error. */
jae __syscall_error /* Branch forward if it failed. */
ret /* Return to caller. */
And __syscall_error is defined in
libc/sysdeps/linux/x86_64/__syscall_error.c as
int __syscall_error(void) attribute_hidden;
int __syscall_error(void)
{
register int err_no __asm__ ("%rcx");
__asm__ ("mov %rax, %rcx\n\t"
"neg %rcx");
__set_errno(err_no);
return -1;
}
Notice that __syscall_error returns -1 as a 32-bit int in %rax, a 64-bit
register i.e. 0x00000000ffffffff (decimal 4294967295). When this value
is compared to -1 in _sys_chk_seccomp_flag_kernel() the result is false,
leading the function to always return 0.
Prevent the error by coercing the return value of syscall() to int in a
temporary variable before comparing it to -1. We could use just an (int)
cast but the variable makes the code more readable and the machine code
generated by the compiler is the same in both cases.
All other syscall() invocations were inspected and they either already
coerce the result to int or do not compare it to -1.
The same problem probably occurs on other 64-bit systems but so far only
x86_64 was tested.
A bug report is being submitted to uClibc.
Upstream status: https://github.com/seccomp/libseccomp/pull/175
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 440c7a9d9e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a BPF generation bug where the optimizer mistakenly identified
duplicate BPF code blocks.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d5787d1ab1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These patches are already in qemu upstream under:
- 184943d827ce09375284e6fbb9fd5eeb9e369529
- 71ba74f67eaca21b0cc9d96f534ad3b9a7161400
They rename gettid() to sys_gettid() to avoid clash with glibc
Signed-off-by: Paulo Matos <pmatos@igalia.com>
Tested-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9dcca3ae40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a couple of important things and among other things the build of
pvrdma code:
----------------------->8---------------------
In function 'create_qp':
hw/rdma/vmw/pvrdma_cmd.c:517:16: error: 'rc' undeclared
----------------------->8---------------------
Bumped into this build problem while building vanilla
qemu_arm_versatile_defconfig.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Alexander Dahl <post@lespocky.de>
Cc: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4bed6dbec9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2019-14287: a sudo user may be able to run a command as root
when the Runas specification explicitly disallows root access as long as
the ALL keyword is listed first.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4a96d62749)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building gst1-plugins-base with GL support on the rpi3 (which
supports only GLES2, not full desktop GL), GStreamer was being asked to
disable its GL support completely. This isn't correct since it can be
used with either GL or GLES2. There is already a Config.in symbol to
indicate that either of them is enabled:
BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API. So use that to
determine if gl should be enabled or disabled.
While we're at it, also move the GL/GLES handling under the same API
condition. This makes it clearer that they belong together.
Signed-off-by: Charlie Turner <cturner@igalia.com>
Reviewed-by: Adrian Perez de Castro <aperez@igalia.com>
[Arnout: refactor using
BR2_PACKAGE_GST1_PLUGINS_BASE_LIB_OPENGL_HAS_API]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4164d31e05)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Back in commit 025b863e6f, the option
BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS was introduced, to
separate the option that host packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS) from the option that target
packages needing Rust should depend on
(BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS).
Since the example in the manual is showing a target package, we must
use BR2_PACKAGE_HOST_RUSTC_TARGET_ARCH_SUPPORTS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Sam Voss <sam.voss@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit edee45b843)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit modifies the main() function so that it returns the sum of
build and legal errors, making sure the overall test-pkg script exists
with a non-zero error code upon failure.
Signed-off-by: Heiko Thiery <heiko.thiery@kontron.com>
[Thomas: improved commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5093435f66)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
QT_QPA_EGLFS_ALWAYS_SET_MODE=1 needs to be exported, otherwise the Qt5
Cinematic demo throws a storm of the following messages:
Could not queue DRM page flip on screen LVDS1 (Invalid argument)
Improve the instructions by mentioning such requirement.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d9ccd8f0fc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license file for this application is BSD-2-Clause and not
BSD-3-Clause as we currently state in the _LICENSE variable.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1eb8252cce)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Morgan's e-mail is bouncing:
"""
This message was created automatically by mail delivery software.
A message that you sent could not be delivered to one or more of its
recipients. This is a permanent error. The following address(es) failed:
m.delestre@sinters.fr
retry timeout exceeded
"""
And I was confirmed by CORJON Julien <CORJON.J@ecagroup.com> that
Morgan is no longer at ECA/Sinters.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6015b46865)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a private e-mail answering one of our notifications about packages
being outdated, Jonathan replied:
"""
I switched from Buildroot to OpenEmbedded in 2013 so am no longer actively
involved with Buildroot.
Please unsubscribe me from outdated package notifications.
"""
So let's remove him from the DEVELOPERS file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 175c3f8b2d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to 6.0.1, python-tornado has dropped support for Python 2
and now needs Python >= 3.5 (cfr. setup.cfg).
Apparently this is not checked by setuptools, and apparently
byte-compile is not done in the autobuilders, so there's not autobuild
failure.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Asaf Kahlon <asafka7@gmail.com>
Cc: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 69c787de04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop second patch (already in version)
- Add libmaxminddb optional dependency and use --disable-libgeoip to prefer
maxminddb over geoip, see:
d29072647fc55226b712
- Disable sphinx-build (to avoid a build failure)
- This release fixes a number of issues found in the 4.1 branch. Some of
the issues are security issues, so upgrading is highly recommended.
See https://suricata-ids.org/2019/09/24/suricata-4-1-5-released
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 37be55a5db)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following (low severity) security vulnerabilities:
4.0.9:
- CVE-2019-2386: After user deletion in MongoDB Server the improper
invalidation of authorization sessions allows an authenticated user's
session to persist and become conflated with new accounts, if those
accounts reuse the names of deleted ones
https://jira.mongodb.org/browse/SERVER-38984
4.0.11:
- CVE-2019-2389: Incorrect scoping of kill operations in MongoDB Server's
packaged SysV init scripts allow users with write access to the PID file
to insert arbitrary PIDs to be killed when the root user stops the MongoDB
process via SysV init
https://jira.mongodb.org/browse/SERVER-40563
- CVE-2019-2390: An unprivileged user or program on Microsoft Windows which
can create OpenSSL configuration files in a fixed location may cause
utility programs shipped with MongoDB server versions less than 4.0.11
https://jira.mongodb.org/browse/SERVER-42233
Plus a number of other bugfixes. For details, see the release notes:
https://docs.mongodb.com/manual/release-notes/4.0/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 165e9c163c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2019-16276: Go before 1.12.10 and 1.13.x before 1.13.1 allow HTTP
Request Smuggling.
https://github.com/golang/go/issues/34540
>From the release notes:
go1.12.10 (released 2019/09/25) includes security fixes to the net/http and
net/textproto packages
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bd574c445c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OMAP kernels use 8250 driver by default. Hence the name of
the console device is not /dev/ttyO0 but /dev/ttyS0.
Use /dev/console in order to handle the console independently
of the selected driver.
Tested in BeagleBone Black board.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 68b5b79b2f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise they are installed even though the Braille support is not
built because it requires liblouis, which is not available.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3da92264c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I no longer work at Amarula Solutions and neither do I have access to
olimex A33 olinuxino board. So, add Jagan as maintainer of this board.
Signed-off-by: Shyam Saini <mayhs11saini@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 31fb2ac781)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xtensa hwloop_optimize segfaults when zero overhead loop is about to be
inserted as the first instruction of the function.
Insert zero overhead loop instruction into new basic block before the
loop when basic block that precedes the loop is empty.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a88e87eee0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stack pointer adjustment code in xtensa call0 ABI prologue missed a case
of no callee-saved registers and a stack frame size bigger than 128 bytes.
Handle that case.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9fd7ad8e71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some installations mount /tmp with the 'noexec' option, which prevents
running the program generated there to check the kernel headers.
Avoid the problem by generating the program under $(BUILD_DIR), passed
as the first argument to check-kernel-headers.sh.
We could globally export a TMPDIR environment variable with some path
under $(BUILD_DIR) but such solution would be too intrusive, depriving
the user from the freedom to set TMPDIR at his will (or needs).
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12241
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6136765b23)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Drop second and third patches (alredy in version)
- Add mitigation against an ECDSA timing attack. [T4626,CVE-2019-13627]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 26daf383f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recent versions of ncurses now have the license information in a
separate file called COPYING.
Signed-off-by: Thomas Huth <huth@tuxfamily.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40de427a63)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Joe changed the COPYING file from GPL-1.0 to GPL-2.0 in the development
leading up to 3.8:
d731f9b379/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 0d26068b38)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes WARNINGs in make legal-info of the kind:
WARNING: kf5-extra-cmake-modules-5.47.0: cannot save license
(KF5_EXTRA_CMAKE_MODULES_LICENSE_FILES not defined)
Signed-off-by: Nicolas Carrier <nicolas.carrier@orolia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit a6c594b8dc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source files contain the "(at your option) any later version" text, so
change the licese to GPL-2.0+.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f58ea370da)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source files contain the "(at your option) any later version" text and
the website states:
License
This program is free software; you can redistribute it and/or modify it
under the terms of the GNU General Public License as published by the Free
Software Foundation; either version 2 of the License, or (at your option)
any later version.
http://0pointer.de/lennart/projects/ifplugd/
So change the license to GPL-2.0+
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d8c2d82d7a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Which is the version used by docker 18.09.9:
0a3767c7e9
Also add a hash for the license file.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 02e2fe2eca)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Includes a number of post-18.09.7 bugfixes and to keep in sync with the
docker-engine version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c5568f9985)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2019-13509: Docker Engine in debug mode may sometimes add secrets to the
debug log. This applies to a scenario where docker stack deploy is run to
redeploy a stack that includes (non external) secrets. It potentially
applies to other API users of the stack API if they resend the secret.
And a number of other non-security issues.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1d1fb619f9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
texttotext must be linked to libiconv if !BR2_ENABLE_LOCALE so pull a
patch applied upstream that adds libiconv discovery via autoconf.
With this change, autoreconf requires the config.rpath and ABOUT-NLS
files which are not in v1.25.4. Add a pre-configure hook to fake them.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12031
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 5376b4b4e3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a newer host system cmake to build MariaDB, the following build
error occurs:
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
CMake Error at cmake/os/Linux.cmake:29 (STRING):
STRING sub-command REPLACE requires at least four arguments.
Call Stack (most recent call first):
CMakeLists.txt:101 (INCLUDE)
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11781
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit c2ff8c63da)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mariadb no longer allows the WITH_SSL=OFF configure option. It will
instead search for openssl or gnutls headers, and if missing error out
with:
CMake Error at /usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:137 (message):
Could NOT find GnuTLS (missing: GNUTLS_LIBRARY GNUTLS_INCLUDE_DIR)
(Required is at least version "3.3.24")
Call Stack (most recent call first):
/usr/share/cmake/Modules/FindPackageHandleStandardArgs.cmake:378 (_FPHSA_FAILURE_MESSAGE)
/usr/share/cmake/Modules/FindGnuTLS.cmake:54 (FIND_PACKAGE_HANDLE_STANDARD_ARGS)
libmariadb/CMakeLists.txt:298 (FIND_PACKAGE)
Therefore, make host-mariadb depend on host-openssl, and tell mariadb
to use the system openssl.
This was not found by autobuilders because mariadb isn't built in the
autobuilders (it's part of a choice).
Note that the target mariadb already has an unconditional dependency
on openssl.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Tested-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit fca2e83768)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If follow through the customize-outside-br.txt with how to add external
toolchain in br-ext tree then one thing is missing - inclusion of
*.mk file with external toolchain package description.
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 392b60f176)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Remove second patch (already in version)
- Fix a missing error detection in ECJPAKE. This could have caused a
predictable shared secret if a hardware accelerator failed and the
other side of the key exchange had a similar bug.
- When writing a private EC key, use a constant size for the private
value, as specified in RFC 5915. Previously, the value was written as
an ASN.1 INTEGER, which caused the size of the key to leak about 1 bit
of information on average and could cause the value to be 1 byte too
large for the output buffer.
- The deterministic ECDSA calculation reused the scheme's HMAC-DRBG to
implement blinding. Because of this for the same key and message the
same blinding value was generated. This reduced the effectiveness of
the countermeasure and leaked information about the private key
through side channels. Reported by Jack Lloyd.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6bab018ee8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Remove all patches except first one (already in version)
- Update first patch
- Fix CVE-2019-6471: A race condition when discarding malformed packets
can cause BIND to exit with an assertion failure
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 395ad387e0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a security issue. From the annoncement:
A vulnerability exists in Mosquitto versions 1.5 to 1.6.5 inclusive.
If a client sends a SUBSCRIBE packet containing a topic that consists of
approximately 65400 or more '/' characters, i.e. the topic hierarchy
separator, then a stack overflow will occur.
The issue is fixed in Mosquitto 1.6.6 and 1.5.9. Patches for older versions
are available at https://mosquitto.org/files/cve/2019-hier
The fix addresses the problem by restricting the allowed number of topic
hierarchy levels to 200. An alternative fix is to increase the size of the
stack by a small amount.
https://mosquitto.org/blog/2019/09/version-1-6-6-released/
Also notice that 1.6.5 silently fixed a security issue:
CVE-2019-11778
A vulnerability exists in Mosquitto version 1.6 to 1.6.4 inclusive, known as CVE-2019-11778
If an MQTT v5 client connects to Mosquitto, sets a last will and testament,
sets a will delay interval, sets a session expiry interval, and the will
delay interval is set longer than the session expiry interval, then a use
after free error occurs, which has the potential to cause a crash in some
situations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c5c106e4e3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This would normally be enabled by systemctl preset-all however since we
don't have a host systemctl we need to enable the service manually.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b81e00e2ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The JSON::PP Perl module is used at build time by the webkitgtk and
wpewebkit packages.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e0c879509d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- ECDSA remote timing attack (CVE-2019-1547)
Severity: Low
- Fork Protection (CVE-2019-1549)
Severity: Low
- Padding Oracle in PKCS7_dataDecode and CMS_decrypt_set1_pkey (CVE-2019-1563)
Severity: Low
For more details, see the advisory:
https://www.openssl.org/news/secadv/20190910.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 99a2f0dd6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release, fixing a number of issues:
- Fix v5 DISCONNECT packets with remaining length == 2 being treated as a
protocol error. Closes#1367.
- Fix support for libwebsockets 3.x (excluding 3.2.0)
- Fix slow websockets performance when sending large messages. Closes
#1390.
- Fix bridges potentially not connecting on Windows. Closes#478.
- Fix clients authorised using use_identity_as_username or
use_subject_as_username being disconnected on SIGHUP. Closes#1402.
- Improve error messages in some situations when clients disconnect.
Reduces the number of "Socket error on client X, disconnecting" messages.
- Fix Will for v5 clients not being sent if will delay interval was greater
than the session expiry interval. Closes#1401.
- Fix CRL file not being reloaded on HUP. Closes#35.
- Fix repeated "Error in poll" messages on Windows when only websockets
listeners are defined. Closes#1391.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b7c4cdad1e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerability:
CVE-2019-15903: In libexpat before 2.2.8, crafted XML input could fool the
parser into changing from DTD parsing to document parsing too early; a
consecutive call to XML_GetCurrentLineNumber (or XML_GetCurrentColumnNumber)
then resulted in a heap-based buffer over-read.
While we're at it, also change to use .tar.xz rather than the bigger
.tar.bz2.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 386794d02e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useful for test purposes when we want to install util-linux with a
custom TARGET_DIR, e.g.
$ make util-linux-reinstall TARGET_DIR=/tmp/util-linux
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40af3a6661)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create the configuration file as /etc/thttpd.conf, as expected by the
systemd unit file.
This matches other web server packages that install configuration files
at /etc/lighttpd/, /etc/apache2, etc.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 349501320b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The init script provided by thttpd is for FreeBSD. Add a custom one,
made specifically for Buildroot.
Signed-off-by: Carlos Santos <unixmania@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fc7488e99f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- CVE-2019-9511 "Data Dribble": The attacker requests a large amount of data
from a specified resource over multiple streams. They manipulate window
size and stream priority to force the server to queue the data in 1-byte
chunks. Depending on how efficiently this data is queued, this can
consume excess CPU, memory, or both, potentially leading to a denial of
service.
- CVE-2019-9512 "Ping Flood": The attacker sends continual pings to an
HTTP/2 peer, causing the peer to build an internal queue of responses.
Depending on how efficiently this data is queued, this can consume excess
CPU, memory, or both, potentially leading to a denial of service.
- CVE-2019-9513 "Resource Loop": The attacker creates multiple request
streams and continually shuffles the priority of the streams in a way that
causes substantial churn to the priority tree. This can consume excess
CPU, potentially leading to a denial of service.
- CVE-2019-9514 "Reset Flood": The attacker opens a number of streams and
sends an invalid request over each stream that should solicit a stream of
RST_STREAM frames from the peer. Depending on how the peer queues the
RST_STREAM frames, this can consume excess memory, CPU, or both,
potentially leading to a denial of service.
- CVE-2019-9515 "Settings Flood": The attacker sends a stream of SETTINGS
frames to the peer. Since the RFC requires that the peer reply with one
acknowledgement per SETTINGS frame, an empty SETTINGS frame is almost
equivalent in behavior to a ping. Depending on how efficiently this data
is queued, this can consume excess CPU, memory, or both, potentially
leading to a denial of service.
- CVE-2019-9516 "0-Length Headers Leak": The attacker sends a stream of
headers with a 0-length header name and 0-length header value, optionally
Huffman encoded into 1-byte or greater headers. Some implementations
allocate memory for these headers and keep the allocation alive until the
session dies. This can consume excess memory, potentially leading to a
denial of service.
- CVE-2019-9517 "Internal Data Buffering": The attacker opens the HTTP/2
window so the peer can send without constraint; however, they leave the
TCP window closed so the peer cannot actually write (many of) the bytes on
the wire. The attacker then sends a stream of requests for a large
response object. Depending on how the servers queue the responses, this
can consume excess memory, CPU, or both, potentially leading to a denial
of service.
- CVE-2019-9518 "Empty Frames Flood": The attacker sends a stream of frames
with an empty payload and without the end-of-stream flag. These frames
can be DATA, HEADERS, CONTINUATION and/or PUSH_PROMISE. The peer spends
time processing each frame disproportionate to attack bandwidth. This can
consume excess CPU, potentially leading to a denial of service.
(Discovered by Piotr Sikora of Google)
Notice that this version bump requires nghttp2 1.39.2. It also includes an
(unconditional) embedded copy of brotli.
Update the license hash because of copyright year changes and the addition
of the MIT-style license text for large_pages and brotli.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8c3032414e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2019-9511: Data Dribble
CVE-2019-9513: Resource Loop
For details, see the advisory:
https://nghttp2.org/blog/2019/08/19/nghttp2-v1-39-2/
Notice that libnghttp2 itself is not affected by these vulnerabilities, only
nghttpx and nghttpd (which are currently not built).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4c7e7acbe4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/a6247b95f1578fe1daec485589582310c75b5d84/
luksmeta-v9 generates man pages at build if a2x is available since:
commit 3fa51bb22350fee101fc52044949f6eb394114ae
Author: Daniel Kopeček <dkopecek@redhat.com>
Date: Fri Jul 13 01:52:45 2018 +0200
Generate manual page from source during build time
If a2x (asciidoc) is not available during configure time,
a warning will be generated and the manual page wont be
generated nor installed.
Man pages are not needed on target and the build step fails in certain
setups, so disable it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0471f650b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release, fixing a potential infinite loop when handling the LUKS
header:
git shortlog v8..v9
Daniel Kopeček (2):
Use asciidoc as the manual page source format
Generate manual page from source during build time
Milan Broz (1):
Fix infinite loop when initializing trimmed LUKS header.
Nathaniel McCallum (3):
Fix invalid man page section reference
Fix typos in the man page
Release version 9
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8103460aa1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nfs-utils selects rpcbind, and rpcbind unconditionally selects
libtirpc. Therefore, nfs-utils will never be used with the C library
RPC implementation: libtirpc will always be used. Consequently, all
the conditional logic to use libtirpc only if available is useless,
and we can use libtirpc unconditionally.
As an added bonus, this means that we can enable IPv6, because
libtirpc provides an IPv6-compatible RPC implementation.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=10806
Signed-off-by: Carlos Santos <unixmania@gmail.com>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 749334cb36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This includes the following changes:
94079e6 Fixed invalid UTF-8 codes in ChangeLog
1470a82 Updated service.fedora
9596c53 Updated service.fedora
b50b59b New version 1.9.5
037e059 New version 1.9.5
2681d01 Added test for /dev/random symlink
0dac21b Update to automake 1.16
638e2f0 Fixed built issue on Cygwin
083f827 minimize diff
b38def1 minimize diff
e16369d take into account review by @nbraud
6dfce53 Remove support for CPUID on ia64
fc50dda [PATCH] Output some progress during CUSUM and RANDOM EXCURSION test
be4e481 NEWS: Cleanup extraneous whitespace
0815b3c Fixup upstream changelog
6d52229 Fix type mismatch in get_poolsize
90d00f7 service.redhat: update PIDFile
16a9726 fix segv at start
ceab89a init.d/Makefile.am: add missing dependency
01e3154 Diagnostics capture mode now works correctly by referencing the right variable during rng warmup
f219358 Fix segfault on arm machines
Also add a 'v' prefix in _SITE variable.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8e1b0d8857)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python packages should no longer depend on BR2_PACKAGE_PYTHON in their
config file, unless they are only compatible with Python 2.
Signed-off-by: Raphaël Mélotte <raphael.melotte@essensium.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b5c553ba59)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
(3.44.1)
CVE-2019-11729: More thorough input checking
CVE-2019-11719: Don't unnecessarily strip leading 0's from key material
during PKCS11 import
CVE-2019-11727: Prohibit use of RSASSA-PKCS1-v1_5 algorithms in TLS 1.3
Note:
This version requires nspr 4.22 or newer provided by the previous patch.
Signed-off-by: Giulio Benetti <giulio.benetti@micronovasrl.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7e509333ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kevin Joly (kevin.joly@sensefly.com)<mailto:kevin.joly@sensefly.com>
Your message couldn't be delivered to the recipient because you don't have permission to send to it.
Looking at his LinkedIn profile, he left SenseFly in January 2019,
which quite certainly explains why his @sensefly.com e-mail address is
no longer working.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 55814b8ef9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
AST-2019-004: Crash when negotiating for T.38 with a declined stream
When Asterisk sends a re-invite initiating T.38 faxing, and the endpoint
responds with a declined media stream a crash will then occur in Asterisk.
https://downloads.asterisk.org/pub/security/AST-2019-004.pdf
AST-2019-005: Remote Crash Vulnerability in audio transcoding
When audio frames are given to the audio transcoding support in Asterisk the
number of samples are examined and as part of this a message is output to
indicate that no samples are present. A change was done to suppress this
message for a particular scenario in which the message was not relevant. This
change assumed that information about the origin of a frame will always exist
when in reality it may not.
https://downloads.asterisk.org/pub/security/AST-2019-005.pdf
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 965e26fd99)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since configure is using PKG_CHECK_MODULES macro, we need to
unconditionally depends on host-pkgconf.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8e3347e595)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a0b032ad85 (package/qemu: security bump to version 3.1.1)
bumped the version but didn't update the patch subdirectory name, so the
patches are now ignored.
Fix that by renaming the directory. Drop
0002-configure-improve-usbfs-check.patch as that is now upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c796c83037)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2019-09-04 22:39:55 +02:00
247 changed files with 3531 additions and 2091 deletions
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
