U-Boot must use $(BR2_MAKE) as it uses a Make feature from v4.0. We
already use $(BR2_MAKE) in the BUILD_CMDS, but the kconfig commands
still uses $(MAKE). Without this fix, building U-Boot with kconfig will
fail with the following cryptic error.
> Makefile:37: *** missing separator. Stop.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The U-Boot package requires GNU Make v4.0 or later, and so all U-Boot
"make" commands must use "$(BR2_MAKE)" so they use the host-make
package. Currently pkg-kconfig is hardcoded to uses $(MAKE), so add a
way to support $(BR2_MAKE). The package infra for pkg-automake and
pkg-cmake have a similar problem, and they solved it by defining a
$(PKG)_MAKE variable, and allowing each package to override it.
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update our bleeding edge br-arm-internal-glibc defconfig to use the
latest version of gcc and binutils, so that we test these in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If the less package is not enable and systemd is enabled,
then configure the less applet to fully work with systemd.
systemd sets the flags for less in an environment variable
and requires a few options for correct display.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
added tpm2-tss as dependency (needed for ima_boot_aggregate cmd for
reading PCR; better to use libtss2-esys and libtss2-rc than require
tsspcrread binary in runtime)
added also sha1 hash from sourceforge
added 2 patches fixing build (both are 1.3 specific)
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop gdlib-config and use pkg-config to find gd.
Indeed, gdlib.pc is available since version 2.1.0 and
071a2a94ee
and gdlib-config has been dropped from version 2.3.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The version of this patch merged by upstream has some changes to rpath
syntax matching and handling for additional syntax edge cases.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
this dependency is optional, it is used to
allow udev to add information to blockdevices.
Aslong as MOUNT or FSCK are enabled, it will end up enabled
anyway, but this seems more clear and correct.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds switches for new options:
initrd: Installs services if systemd is used on an initramfs,
useless otherwise
kernel-install: helper scripts to update kernel with an
systemd-boot partition
analyze: tool to analyze bootup and dependencies
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add zstd as optional dependency, and
disable new options for host-systemd.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable this bootloader for cortex a7 based SoCs: support for the
sama7g5 SoC is now in upstream at91bootstrap3, and it is a Cortex-A7
based SoC.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cups service for systemv was erroneously installed in /etc/rcX.d and
therefore not working. Also, its init script installed in /etc/init.d
was definitely not a Buildroot-style init script.
This patch adds a Buildroot style init script instead of using the
example provided by the package.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2018-14553 : gdImageClone in gd.c in libgd 2.1.0-rc2 through
2.2.5 has a NULL pointer dereference allowing attackers to crash an
application via a specific function call sequence.
- Fix CVE-2019-6977: gdImageColorMatch in gd_color_match.c in the GD
Graphics Library (aka LibGD) 2.2.5, as used in the imagecolormatch
function in PHP before 5.6.40, 7.x before 7.1.26, 7.2.x before 7.2.14,
and 7.3.x before 7.3.1, has a heap-based buffer overflow. This can be
exploited by an attacker who is able to trigger imagecolormatch calls
with crafted image data.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Switch site to get latest version
- Drop patches (already in version)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Details: https://lists.gnu.org/archive/html/grub-devel/2020-07/msg00034.html
Fixes the following security issues:
* CVE-2020-10713
A flaw was found in grub2, prior to version 2.06. An attacker may
use the GRUB 2 flaw to hijack and tamper the GRUB verification
process. This flaw also allows the bypass of Secure Boot
protections. In order to load an untrusted or modified kernel, an
attacker would first need to establish access to the system such as
gaining physical access, obtain the ability to alter a pxe-boot
network, or have remote access to a networked system with root
access. With this access, an attacker could then craft a string to
cause a buffer overflow by injecting a malicious payload that leads
to arbitrary code execution within GRUB. The highest threat from
this vulnerability is to data confidentiality and integrity as well
as system availability.
* CVE-2020-14308
In grub2 versions before 2.06 the grub memory allocator doesn't
check for possible arithmetic overflows on the requested allocation
size. This leads the function to return invalid memory allocations
which can be further used to cause possible integrity,
confidentiality and availability impacts during the boot process.
* CVE-2020-14309
There's an issue with grub2 in all versions before 2.06 when
handling squashfs filesystems containing a symbolic link with name
length of UINT32 bytes in size. The name size leads to an
arithmetic overflow leading to a zero-size allocation further
causing a heap-based buffer overflow with attacker controlled data.
* CVE-2020-14310
An integer overflow in read_section_from_string may lead to a heap
based buffer overflow.
* CVE-2020-14311
An integer overflow in grub_ext2_read_link may lead to a heap-based
buffer overflow.
* CVE-2020-15706
GRUB2 contains a race condition in grub_script_function_create()
leading to a use-after-free vulnerability which can be triggered by
redefining a function whilst the same function is already
executing, leading to arbitrary code execution and secure boot
restriction bypass
* CVE-2020-15707
Integer overflows were discovered in the functions grub_cmd_initrd
and grub_initrd_init in the efilinux component of GRUB2, as shipped
in Debian, Red Hat, and Ubuntu (the functionality is not included
in GRUB2 upstream), leading to a heap-based buffer overflow. These
could be triggered by an extremely large number of arguments to the
initrd command on 32-bit architectures, or a crafted filesystem
with very large files on any architecture. An attacker could use
this to execute arbitrary code and bypass UEFI Secure Boot
restrictions. This issue affects GRUB2 version 2.04 and prior
versions.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to backport a commit to fix a build failure cased by a spurious
wheel dependency.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This _partially_ reverts commit 2dbb0660fb.
Indeed, before 2dbb0660fb, the per-package ../host/ directory was
explicitly created right before it was populated. With 2dbb0660fb, it
is now created only at the beginning of the configure step.
However, some packages may have download or extract host dependencies,
and when we are trying to rsync them, the destination .../host/
directory does not yet exist at the download or extract steps, thus the
build fails. E.g., with wget which needs host-lzip if the system does
not have it yet:
rsync -a --link-dest=/home/ymorin/dev/buildroot/O/per-package/host-lzip/host/ /home/ymorin/dev/buildroot/O/per-package/host-lzip/host/ /home/ymorin/dev/buildroot/O/per-package/wget/host
rsync: mkdir "/home/ymorin/dev/buildroot/O/per-package/wget/host" failed: No such file or directory (2)
rsync error: error in file IO (code 11) at main.c(682) [Receiver=3.1.3]
make[1]: *** [package/pkg-generic.mk:170: /home/ymorin/dev/buildroot/O/build/wget-1.20.3/.stamp_extracted] Error 11
Kudos to Raphael for pin-pointing the culprit commit.
Fixes:
http://autobuild.buildroot.org/results/4c8/4c895c7ac0a635d38f5015b5df0393581ad7b508/
and a slew of similar failures
Notes:
An alternative solution would be to move the creation of the directories
from the configure step to the download step *and* to the rsync step,
but this is not so nice in the end... Let's just ensure they are created
where needed: at the configure step, and when populating them.
Reported-by: Raphael Jacob <r.jacob2002@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add new NLS dependency as well as a patch to fix a build failure
without it
- Drop host-gettext (not needed since autoreconf was dropped with
8729c4ef88)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 0390777bfa (package/docker-engine: needs some kernel
options), docker-engine now automatically ensures the needed kernel options
are enabled, so drop the explicit options from the kernel config.
23:19:27 TestDockerCompose Starting
23:19:28 TestDockerCompose Building
00:14:41 TestDockerCompose Building done
00:15:30 TestDockerCompose Cleaning up
.
----------------------------------------------------------------------
Ran 1 test in 3362.784s
OK
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 4f8229653 (package/docker-engine: needs more runtime
dependencies), docker-engine now automatically pulls in cgroupfs-mount, so
drop the explicit handling of it in TestDockerCompose.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes an issue if host-dbus happens to be rebuilt after systemd, in
which case it autodetects systemd support but then ignored the prefix
when installing unit files. That means that is tries to write to the
host system's /usr/lib/ which fails.
There is no reason to build and install systemd support in the host
build, so disable it explicitly.
Signed-off-by: John Keeping <john@metanate.com>
Tested-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change.
Rather than tracking both build targets and sub directory to run 'make
install' from, use a make loop for the staging/target install logic, similar
to how we are doing it to for the build step and directly use the Makefile
in the sub directory rather than the helper lib/lz4 targets in the top level
Makefile.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since the bit32 module is needed by all lua ABI 5.1 providers we can
select based on the lua ABI version instead of both lua 5.1 and luajit.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since solarus is compatible with lua interpreters that provide the
version 5.1 ABI we should depend on that instead of unconditionally
selecting luajit.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since collectd lua support is compatible with any luainterpreter
implementation we should depend on BR2_PACKAGE_HAS_LUAINTERPRETER
instead of unconditionally selecting BR2_PACKAGE_LUA.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: use luainterpreter as dependency]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since sysdig is compatible with lua interpreters that provide the
version 5.1 ABI we should depend on that instead of unconditionally
selecting luajit.
Use luainterpreter as the dependency, now that either lua or luajit
can be used.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- reorder dependencies in Config.in: package deps go after toolchain
deps
- keep the toolchain deps together in the comment
- switch to using luainterpreter as a build dependency
- split the now-long _DEPENDENCIES list
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that we have booleans to represent the Lua ABI version, and that
every Lua providers do select those, there is no longer any reason
for them to also handle the ABI version string anymore.
Move the defaults into the common luainterpreter.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Francois Perrad <francois.perrad@gadz.org>
Since a number of packages depend on specific ABI version that are
provided by lua and luajit packages we should have a kconfig variable
that those packages can depend on.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Luajit is a provider for luainterpreter. We can't select providers of
virtual packages; we can only depend on them.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- a lua interpreter is needed, so don't drop the dependency
- make it a "depends on" rather than a "select"
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Luajit is a provider for luainterpreter. We can't select providers of
virtual packages; we can only depend on them.
Note also that it is not very clear whether the host and target variants
of EFL need to be built with the same lua interpreter. Today, this is
guaranteed as we inly use luajit in both cases. But there were issues
with lua 5.1 in the past, so stick to only using luajit.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- depend on luajit, not "any" luainterpreter
- which keeps the host and target variants built with the same
interpreter
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump kernel to version 5.7.10 and U-Boot to 2020.07
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic doing the padding and concatenation of DDR firmware was
duplicated between the DDR4 and LPDDR4 cases. This commit refactors
this logic into a single function FIRMWARE_IMX_PREPARE_DDR_FW.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
BR2_VERSION_FULL is currently defined as follows:
BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
This BR2_VERSION_FULL value then gets used as the "VERSION" variable
in the /etc/os-release file.
The logic of "setlocalversion" is that if it is exactly on a tag, it
returns nothing.
If it is on a tag + a number of commits, then it returns only
-XYZ-gABC where XYZ is the number of commits since the last tag, and
ABC the git commit hash (these are extracted from git describe).
This output then gets concatenated to BR2_VERSION which gives
something like 2020.05 or 2020.05-00123-g5bc6a.
The issue is that when you're on a tag specific to your project, which
is not a Buildroot YYYY.MM tag, then the output of setlocalversion is
empty, and all you get as VERSION in os-release is $(BR2_VERSION)
which is not really nice. Worse, if you have another non-official
Buildroot tag between the last official Buildroot tag/version and
where you are, you will get $(BR2_VERSION)-XYZ-gABC, but XYZ will not
correspond to the number of commits since BR2_VERSION, but since the
last tag that "git describe" as found, which is clearly incorrect.
Here is an example: you're on master, "make print-version" (which
displays BR2_VERSION_FULL) will show:
$ make print-version
2020.08-git-00758-gc351877a6e
So far so good. Now, you create a tag say 5 commits "before" master,
and show BR2_VERSION_FULL again:
$ git tag -a -m "dummy tag" dummy-tag HEAD~5
$ make print-version
2020.08-git-00005-gc351877a6e
This makes you believe you are 5 commits above 2020.08, which is
absolutely wrong.
So this commit simplifies the logic of setlocalversion to simply
return what "git describe" provides, and not prepend $(BR2_VERSION) in
the main Makefile. Since official Buildroot tags match official
Buildroot version names, you get the same output when you're on an
official Buildroot tag, or some commits above a Buildroot tag. An in
other cases, you get a sensible output. The logic is also adjusted for
the Mercurial case.
In the above situation, with this commit applied, we get:
$ make print-version
dummy-tag-6-g6258cdddeb
(6 commits instead of 5 as we have this very commit applied, but at
least it's 6 commits on top of the dummy-tag)
Finally, if you're not using a version control system, setlocalversion
was already returning nothing, so in this case, the Makefile simply
sets BR2_VERSION_FULL to BR2_VERSION to preserve this behavior.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The defconfig check has been introduced by the previous
patch before the building each defconfig but those builds
are done every week or more.
Checking if a defconfig is valid can be done on every
push in the repository since it take few seconds.
This would allow to detect as soon as possible a problem
in a defconfig and eventually avoid breaking the build
while build testing all defconfig.
Introduce a new job template ".defconfig_check" in
gitlab-ci.yml.in and modify the generate-gitlab-ci-yml
to create a job for each defconfig to run the test.
Although, we could have used only one job to do all
tests, using one job per defconfig allow to identify
easily in gitlab which defconfig is falling.
Tested:
https://gitlab.com/kubu93/buildroot/pipelines/138331069https://gitlab.com/kubu93/buildroot/pipelines/171223758
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For the same reason as for 50b747f212,
we need to check if the generated configuration file (.config)
contains all symbols present in the defconfig file.
If not there is an issue with the defconfig.
This script will be used in .gitlab-ci.yml.
Inspired by is_toolchain_usable() function from genrandconfig:
https://git.busybox.net/buildroot/tree/utils/genrandconfig?h=2020.02#n164
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr:
- strip defconfig lines when reading them
- use a generator to read the defconfig lines
- no need to strip() again when building the missing list
- testing the list directly, not its len()
- simply sys.exit(1) in the error condition
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We can enable uclibc for RISC-V 64 bit now that it has been
bumped from v1.0.32 to v1.0.34.
Uclibc has had basic support for RISC-V 64 bit since v1.0.31, but
shared library and TLS/NPTL support has only been available since
v1.0.33.
This update has been tested using qemu_riscv64_virt_defconfig and
the Buildroot host QEMU.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 2acb27e298 ("package/lz4: make
program installation optional") make the installation of the lz4
programs optional. To preserve backward compatibility, this commit
added a "default y" to the BR2_PACKAGE_LZ4_PROGS.
While Buildroot definitely tries to preserve backward compatibility in
general, in this case, the backward compatibility would mean that
everbody would by default install those 220 KB of program, which are
most likely not needed for the majority of use cases. Installaing them
by default kind of breaks the Buildroot principle of minimalism.
In this specific case, it is believed that the principle of minimalism
wins over the principle of backward compatibility.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
According to the cegui requirements select explicitly the default
OpenGL renderer based on available dependencies.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Often lz4 is used as a library, and not as a standalone program.
Excluding lz4 binary will save some space in this case. Indeed, the
lz4 program is always statically linked against its library, which
makes it duplicate the whole library size:
$ ls -l usr/lib/liblz4.so.1.9.2 usr/bin/lz4
-rwxr-xr-x 1 thomas thomas 226724 27 juil. 16:33 usr/bin/lz4
-rwxr-xr-x 1 thomas thomas 156996 27 juil. 16:33 usr/lib/liblz4.so.1.9.2
Since lz4 is now primarily a library, it's moved to the "Libraries"
section.
Of course, installation of programs defaults to "yes" to preserve
backward compatibility.
Signed-off-by: Ed Spiridonov <edo.rus@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-matplotlib may be used in qt5 application. This patch add option to
enable qt5. Since this backend is automatically enabled when pyqt5 is detected,
list dependencies is simply an updated (no enable/disable options).
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This Python module only works for Python 3: the target variant has a
"depends on BR2_PACKAGE_PYTHON3".
However today in Buildroot, when no target python is selected, or when
BR2_PACKAGE_PYTHON=y, all host python modules are installed for
host-python, i.e Python 2. But this module won't install in Python 2,
so let's force its host variant to be installed with Python 3 on the
host. Of course, for that to work, its dependency must also be built
for host-python3, so we change it to the newly introduced
host-python3-decorator package.
Fixes:
http://autobuild.buildroot.net/results/46a89bd6cd0d0b896b28010db287068309e7a43c/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The host-python-networkx package needs to be built for the
host-python3, even when the target Python is not necessarily Python
3.x. Since it depends on host-python-decorator, we need a Python 3
variant of it, which this patch introduces.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
c-periphery now supports building on older kernels before 4.8 as there
are now checks for the new kernel cdev gpio interface.
Also updated hash file to two space format.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The nodejs configure.py file orders zlib headers before the bundled ICU
headers. The zlib headers happen to be located in the system include
directory, next to some system ICU headers (not bundled). If these are
built before nodejs is, nodejs will get confused and try to use the
system ICU headers instead of the bundled ones.
Fix this by always using host-icu.
Set CXXFLAGS to -DU_DISABLE_RENAMING=1 when building with
system-icu since host-icu is built with --disable-renaming.
Fixes:
- http://autobuild.buildroot.net/results/1ef947553ec762dba6a6202b1cfc84ceed75dbb2/
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- keep alphabetical order in _DEPENDENCIES
- don't introduce HOST_NODEJS_CONF_OPTS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since Gitlab 12.9, Gitlab allow to trigger child pipeline with generated configuration file.
See: https://gitlab.com/gitlab-org/gitlab/-/issues/35632
This allow us to stop updating the .gitlab-ci.yml file when a
new defconfig is added to Buildroot.
Remove check-gitlab-ci.yml job since it is now uneeded.
Remove .gitlab-ci.yml make target.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
[ann.morin.1998@free.fr: manual: no longer needed to update at all]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This variable is no longer used since
4e3be3ae9d ("package/rust: bump version
to 1.33.0")
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rust upstream distributes tarballs with separate rust and cargo
binaries, but also tarballs with everything together. The latter
contains a bit more than what we need, so the download is slightly
larger than separate cargo-bin and rust-bin. But it simplifies our life
if we do the same in rust-bin as in rust (i.e. get both rust and cargo).
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- remove of the llvm workaround patch as it is integrated in this
newer version.
- bump cargo-bin to 0.41 (corresponds to rust 1.40) and update
licenses hashes.
- bump rust-bin to 1.40.
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: David Pierret <david.pierret@smile.fr>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cargo source code is not provided anymore as a separate tarball but is
now built along with the Rust compiler. So update rust host variant to
build Cargo.
For now, all this will be overwritten again by the host-cargo package,
but this package will be removed in later commits.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Patrick Havelange <patrick.havelange@essensium.com>
Tested-by: Sam Voss <sam.voss@rockwellcollins.com>
[Arnout: merge all install commands in HOST_RUST_INSTALL_CMDS]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The cargo config file is much like the cmake and meson configuration
files, something that tells the cargo build system how the
cross-toolchain is configured.
It is currently installed by the cargo package, but this package is
about to be removed as cargo is now built as part of rust
itself. Therefore, install the cargo config file as a toolchain
post-install hook, just like we do for cmake and meson.
However, we don't have a pkg-cargo infrastructure (yet) so we can't
put it there. Therefore, put it in the rustc package - any cargo
package will need rustc.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: David Pierret <david.pierret@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Adding mbpfan, a fan control daemon for MacBook laptops.
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: add hash file, drop Debian init script, drop systemd symlinks, add
DEVELOPERS entry]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes various initialization / systemd issues. From the changelog:
- Provide meaningful exit codes on initialization failures.
- Prevent systemd from starting the daemon before udev changes ownership of
the TPM device node.
- Prevent systemd from starting the daemon if there is no TPM device node.
- Prevent systemd from restarting the daemon if it fails.
- Add SELinux policy to allow daemon to resolve names.
- Add SELinux policy boolean (disabled by default) to allow daemon to
connect to all unreserved ports.
Also adjust .hash file white space to match new agreements.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Other changes:
- Remove upstream patch.
- Change license type to MIT.
- Update license shasum due to the above change.
- Upstrem agained optional support for libglib2 and fsmount, we
disable those so far
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: forcibly disable new features]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libwebsockets currently depends on zlib, however, as of commit
13ba5bbc633ea962d46d9f2bfb2e87c9f7e83b62 (from 2013!) zlib is not actually a
requirement if extensions are not enabled.
By default, libwebsockets sets the "LWS_WITHOUT_EXTENSIONS" option to "ON,"
which removes the need for zlib as a dependency. Because of this default
setting, there are two options:
1) Remove the dependency on zlib, create a new option under Config.in to allow
a user to enable extensions, add zlib as a dependency, and set
LWS_WITHOUT_EXTENSIONS to "OFF" if that option is selected.
2) Keep the dependency and explicitly set LWS_WITHOUT_EXTENSIONS to "OFF."
Below are the size differences in bytes:
- Without zlib and extensions: 44636
- With zlib and without extensions: 44720
- With zlib and with extensions: 44732
Considering the size difference between all 3 is an incredible 96 bytes, and
the difference between what we have now, and enabling extensions is an
insurmountable 12 bytes, it is safe to keep the dependency on zlib and always
enable extensions.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Six years ago, commit b6b5bb518d added the MMU
dependency for the libwebsockets package. However, according to the git
history of the CMakeLists.txt file, libwebsockets has supported the vfork
function for at least the last five years.
After testing with the qemu_arm_versatile_nommu_defconfig and the
br-arm-cortex-m4-full.config file, no errors occurred when building
libwebsockets without MMU support.
Remove the dependency; it is no longer necessary. Update the reverse
dependencies as needed.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Update site to get latest version
- Update hash of COPYING.LIB (update in FSF address with
adcb08292d)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this patch we enable CONFIG_USB for HSDK, which is not explicitly
selected by UDL since the commit 5d50bd440bc2 ("drm/udl: Make udl
driver depend on CONFIG_USB"). Commit 4c13ca86dcf8 ("ARC:
[plat-hsdk]: fix USB regression") is not yet backported to Linux
kernel 5.6.x, so we enable this option in fragment file for HSDK.
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Eugeniy Paltsev <Eugeniy.Paltsev@synopsys.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basic support for the Marvell ESPRESSObin, by Globalscale Technologies.
http://espressobin.net
The kernel config has been extended with a fragment to enable switchcore
support, DSA drivers, and VLAN filtering in the bridge. To make use of
this you need a custom libnl based application, or the iproute2 suite
rather than the brctl tools, which don't support the VLAN filtering.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Add a dependency on libabseil-cpp
- Update the patches to apply properly.
Tested with the following distributions:
- Debian 9
- CentOS 7
- Fedora 32
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package is a new dependency on grpc versions > 1.25.0
Tested with the following distributions:
- Debian 9
- CentOS 7
- Fedora 32
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bump pillow to version 7.2.0. The bump requires the python
xml module available.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
this patch bumps python-pydal to version 20200714.1
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Netopeer2 is a set of tools implementing network configuration
tools based on the NETCONF Protocol.
Netopeer2 needs libnetconf2 to have SSL/TSL and SSH support, so
we enable both openssl and libssh+server from netopeer2, so that
libnetconf2 has appropriate support. But netopeer2 does not use
either, so does not build-depend on them.
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
[yann.morin.1998@free.fr:
- fix dependencies and their comments
- explain openssl and libssh+server dependencies
- fix codestyle in Config,in, noticed by Adam
- fix codestyle in .mk
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These functions are no longer using the GLOBAL_INSTRUMENTATION_HOOKS
mechanism, so it doesn't make much sense for them to be in the section
of pkg-generic.mk related to those hooks.
Move them to the "Helper functions" section.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Now that we are checking the host directory changes throughout all
installation steps and not just during the "host installation step",
it means that changes done within the staging directory (which is a
subdir of the host directory) are also visible in the
.files-list-host.txt file.
Note that this problem already potentially occurs if a host package is
installing files in the staging directory: they would be listed in
.files-list-host.txt even without the changes in this series.
To fix this up, we simply exclude files that are beneath the
$(STAGING_SUBDIR). Note that we do that in all cases, so when
searching $(HOST_DIR), $(HOST_DIR)/$(STAGING_SUBDIR) is excluded, but
when searching $(TARGET_DIR), $(TARGET_DIR)/$(STAGING_SUBDIR) is
excluded, and when search $(STAGING_DIR),
$(STAGING_DIR)/$(STAGING_SUBDIR) is excluded. This is not a problem in
practice since $(TARGET_DIR)/$(STAGING_SUBDIR) and
$(STAGING_DIR)/$(STAGING_SUBDIR) don't exist, but it's not very
nice. However, it allows to keep the code simple.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commits reworks the pkg_size logic to no longer use the
GLOBAL_INSTRUMENTATION_HOOKS mechanism, but instead be directly
implemented within the configure step and install step.
The problem with the current implementation in the
GLOBAL_INSTRUMENTATION_HOOKS is that we only capture what is installed
in $(HOST_DIR) during the "host installation step", what is installed
in $(TARGET_DIR) during the "target installation step" and what is
installed in "$(STAGING_DIR)" during the staging installation step.
While this seems reasonable in principle, it is in fact not completely
true. For example, "toolchain", which is a target package, installs
tons of files in $(HOST_DIR). "qt5base", which is also a target
package, also installs things in $(HOST_DIR). Same with the "syslinux"
package.
The idea behind this patch is pretty simple:
- At the beginning of the configure step, right after the per-package
directories have been populated (if BR2_PER_PACKAGE_DIRECTORIES=y),
we capture the state of the HOST_DIR, TARGET_DIR and STAGING_DIR.
- At the end of all install steps (which is possible thanks to the
newly introduced "install" step), we capture again the state of
HOST_DIR, TARGET_DIR and STAGING_DIR, and compare it to what we
have saved at the configure step.
So regardless of whether a file has been installed in $(HOST_DIR)
during the target or staging installation steps of a target package,
or if a host package has installed a file in $(TARGET_DIR), we will
detect it.
The pkg_size_before and pkg_size_after macros are intentionally left
where they are (even if they now fall in the middle of the
GLOBAL_INSTRUMENTATION_HOOKS implementations) to minimize the diffstat
and facilitate review.
Note that we also have to change check_bin_arch to be explicitly
called from the install step rather than through a
GLOBAL_INSTRUMENTATION_HOOKS as it depends on the .files-list.txt file
produced by the pkg_size_after function.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We currently create HOST_DIR, TARGET_DIR, STAGING_DIR and BINARIES_DIR
in their respective installation steps. However, as we are about to
change how the logic to capture files installed by packages is
implemented, we will need these directories to exist at the configure
step to keep things simple.
Note that when BR2_PER_PACKAGE_DIRECTORIES=y, the HOST_DIR, TARGET_DIR
and STAGING_DIR are anyway already created at the configure step, when
populating the per-package HOST_DIR and TARGET_DIR. This also means
that we can drop the "mkdir" from per-package-rsync.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- create directories after MESSAGE
- use $(Q) not @
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We currently have four different install steps: target installation,
staging installation, images installation and host installation. These
steps are directly triggered from the $(1)-install make target, so
there is no place where we can run some logic once all installation
steps have completed.
However, as part of improving the reliability of the logic done in
step_pkg_size_before and step_pkg_size_after to detect the files
installed by packages, we would in fact need to run some logic after
all installation steps have completed. This will allow us to make sure
that all files are detected, even if a host package installs something
in the target directory, or if a target package installs something in
the host directory.
To achieve this, this commit implements a new stamp file,
.stamp_installed, which is a step that depends on all four install
steps. Currently, this step does nothing except creating the stamp
file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: remove stampfile on foo-reinstall]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The $(1) argument passed to step_pkg_size_{before,after}, which
contains the package name, is no longer used. We simply use $(PKG) to
get the upper-case version of the package name.
So, let's drop this first argument that isn't needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since we're already using $(PKG)_DIR in step_pkg_size_after, we can
also just use $(PKG)_NAME. This allows to make $(1) useless, which
means it can be dropped in a follow-up commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bump to 4.1.1 (commit 96d3d01796) removed setools' dependency on
BR2_INSTALL_LIBSTDCPP, but the corresponding inverse dependency on one
of its Kconfig comment was not removed. This led to have the package
being available while a Kconfig comment on non-matched dependencies is
shown. Fix this by removing the dependency on !BR2_INSTALL_LIBSTDCPP on
the Kconfig comment.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Adapt license hash
(minor additions in LICENSE file about files in doc folder:
"Files contained in the doc/ directory may be licensed under different terms.",
but there are no folder present so no license change)
- Also separate the fields in the hash file by two spaces
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version mainly fixes build issues with more
recent kernels.
98b163a cryptlib.c: fix build on kernel v5.5+
7e72f67 enabled the support for TLS1.1 - AES128-SHA1 - AES256-SHA1
9e76506 Fix build for Linux 5.8-rc1
Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The init script S20urandom is used to preserve the kernel's RNG
seed between reboots. This functionality is not required for the
package "initscripts". Further there are use-cases where this script
should not be installed at all (e.g. systems that only have read-only
partitions), but that's currently not possible as the script is
a mandatory part of the package "initscripts".
Let's move the script into its own package "urandom-scripts" and select it,
if the default skeleton is enabled. This maintains backward-compatibility
and allows to deselect it.
Signed-off-by: Christoph Müllner <christoph.muellner@theobroma-systems.com>
[yann.morin.1998@free.fr:
- extend help text
- default y if initscripts (instead of skeleton default)
- allow use with openRC, but not systemd
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
reSIProcate is a framework that aims to fully implement the SIP
protocol in first class C++. It is intended for use in other
applications, such as the repro SIP proxy.
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patches which were applied upstream.
Reformatted hashes,
Updated license hash after copyright year update:
eb40ca5fbd
Switched _SITE to https.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When using ccache to build the exim package, the HOSTCC value contains
spaces, that are incorrectly interpreted by exim's Makefilei, which uses
the first word of ${CC} to test compiler options. This breaks the build
with "unrecognized option" ccache errors.
Fix that by wrapping the HOSTCC variable in double quotes, as it is done
for other variables that follow.
Signed-off-by: Alejandro González <alejandro.gonzalez.correo@gmail.com>
[yann.morin.1998@free.fr: slight rewording of commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a patch, which has been submitted upstream, to properly detect the
availability of compiler flags before using them.
This will fix the build of exiv2 on CPU architectures for which gcc
doesn't implement -fcf-protection.
Fixes:
http://autobuild.buildroot.net/results/ef6a6fa2309e66a7a36fface626ae0da1a7ec633/
(and many similar build failures on other architectures)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr:
- fix indentation s/TAB/spaces/
- fix CRLF dropped by patchwork
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- Fix incorrect "select"
- Simplify the build command, to allow the package Makefile to use
pkg-config, so added host-pkgconf
- Use a full destination path for the installation step
- Use the Github macro]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
From wikipedia:
utmp maintains a full accounting of the current status of the
system, system boot time (used by uptime), recording user
logins at which terminals, logouts, system events etc.
This is seldom use, if at all, on an embedded device, and may expose
users' behaviour to others (by observing who logs in from where, for
example).
Forcibly disable support for utmp.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr: split off to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Systemd enables compatibility with SysV services and utmp by default,
none of which is needed for buildroot as the packages' .mk will install
only the files for the chosen init system.
Furthermore, SysV support requires a setup where *both* /etc/init.d and
/etc/rc.d exists (the latter for the usual /etc/rcN.d). However, in
Buildroot, the latter does not exist; so we would not be able to provide
a working SysV support anyway.
So, just forcibly disable SysV support.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- expand commit log
- disable utmp in its own patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
All init systems supported by Buildroot have a /run directory and have
a symlink for /var/run -> /run.
Use the /run directory directly.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop fix rpath patch which is no longer needed.
Drop g-ir-scanner/g-ir-compiler override patch which is now upstream.
Rebase remaining patches.
Meson now requires single quotes for cross-compilation.conf, replace
double quotes with single quotes.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Explicitly do not install udev rules and systemd units when installing
the host version of e2fsprogs, as we do not need those files when
calling host tools provided by e2fsprogs from Buildroot.
This fixes a weird issue I encountered: host-e2fsprogs was built and
installed without any issue when building an image from scratch. But
any attempt to rebuild host-e2fsprogs alone was failing during the
installation steps as it tried to install files to the host system.
This is because e2fsprogs' build system (autotools) is using the
prefix given at configuration time when installing its binaries,
configuration files, man pages, etc... but not when installing its
systemd units and udev rules.
The issue did not arise when building it from scratch, as
host-e2fsprogs do not have a dependency on host-udev/systemd, so its
configure script did not automatically enable udev/systemd
installation steps at first.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.13.14 (released 2020/07/16) includes fixes to the compiler, vet, and
the database/sql, net/http, and reflect packages.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This CVE is falsely reported because it was fixed in package version
1.24 (which we are using). Ignore this CVE until the database is
updated.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we define the so-called "overflow group" as 'nogroup'.
However, one practical issue is that systemd-sysusers will otherwise
create a 'nobody' group with gid 999, because that's is what is usual to
define the overflow group: users and groups are defined in LSB (Linux
Standard Base):
https://refspecs.linuxfoundation.org/LSB_5.0.0/LSB-Core-generic/LSB-Core-generic/usernames.html
Quoting: "If the username exists on a system,then they should be in the
suggested corresponding group".
Only Debian and derivatives depart from this custom, naming it 'nogroup'
(hence the rationale for commit 908198e756 (system/skeleton: remove
spurious group 'nobody').
See also commit 9c67af2c52 (system/skeleton: use uid/gid 65534 for
nobody/nogroup), and a related discussion on LWN.net (key is "overflow
UID" which also applies to GID):
https://lwn.net/Articles/695478/
Use the recommended groupname 'nobody'. Adapt packages accordingly.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- reword commit log
- extend commit log with more references (commits and LWN)
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This supports 4 plugins, each will be added at the right spot if
enabled, based on the template coming with systemd.
The sed replacements are carefully written to be idempotent, and to
be robust enough to be combined with the other available packages
(nss_mdns4) in any installation order.
nss-systemd is used for the DynamicUser features, which is a defacto
necessity for systemd. It handles transient users/groups without
touching the /etc/{passwd,group} files on disk. To support the
'SupplementaryGroups' feature, groups should be merged.
nss-myhostname allows resolving the hostname, again without touching
files in /etc.
nss-mymachines adds name resolution from containers supported by
machined. Users from the containers might end up in system groups, so
groups should be merged.
nss-resolve, part of resolved, is required for consistent dns lookups.
As per the documentation (nss-resolve(8)), DNS queries shall not
continue past the resolve service, unless the service is not available.
We anchor nss_resolve to appear after files, if mymachines is also used,
remove that first (and add it back later). Other packages (mdns4) move
around the dns entry, so replacing that is not a good option.
If mdns4 is installed aswell, then resolved will take precedence for
host lookups.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- exp[lain why 'host: resolve' uses !UNAVAIL=return
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The rule to create the staging symlink has it depend on BASE_DIR, and
the symlink is created in BASE_DIR, which means that when the symlink
is created, BASE_DIR is updated, and thus made more recent than the
symlink itself.
As a consequence, every time one runs 'make', the symlink will be older
than BASE_DIR, and so will be re-created.
Ditto for the host symlink when the user has elected to have an
out-of-tree host dir.
Fix that by changing to using an order-only dependency.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In latest patch the SDMA installation was limited to platforms whose
name was mentioned in the binary but this approach wasn't flexible to
manage cases like imx8m using imx7 sdma binary, so this patch does:
- change VPU/SDMA FW options to string to allow specifying the name
(suggested by Thomas)
- remove imx27 sdma case as non-existent
- add imx8m family support (using imx7d binary)
- get rid of FIRMWARE_IMX_PLATFORM_LOWER macro
Fixes: fad2df39b9 ("package/freescale-imx/firmware-imx: clarify installation of firmware files")
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Same version as NXP release 5.4.24-2.1.0
- No changelog provided by NXP
- Tested on Nitrogen8M device with Weston (DRM backend) as follows:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Same version as NXP release 5.4.24-2.1.0
- No changelog provided by NXP
- COPYING/EULA update: LA_OPT_NXP_Software_License v11 February 2020
- Tested on Nitrogen8M device with Weston (DRM backend) as follows:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Same version as NXP release 5.4.24-2.1.0
- No changelog provided by NXP
- COPYING/EULA update: LA_OPT_NXP_Software_License v11 February 2020
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- based on NXP imx_5.4.24_2.1.0 release
- includes latest stable releases, hence 5.4.x naming
- includes support for all Boundary Devices platforms + accessories
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
go1.13.13 (released 2020/07/14) includes security fixes to the
crypto/x509 and net/http packages.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for imx6ullevk_defconfig that allows booting a mainline
kernel and mainline U-Boot.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Separate the fields in the hash file by two spaces.
Change the hash of the license:
- Copyright message changed from 2018,2019 to 2019,2020
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Change the hash of the license:
- Copyright message changed from 'present' to 2020
- Link to BSD 2-Clause License changed from http to https
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Without this backslash, any attempt to run make will result in the error:
package/mender/mender.mk:44: *** recipe commences before first target. Stop
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Mender has support for performing other types of updates other than
just overwriting the rootfs partition that isn't currently in use on
the target.
Some of the default provided modules provide support for:
- Updating a docker container.
- Running a script.
- Installing an RPM.
- Overwriting a directory.
- Updating a single-file.
The single-file update module is used by upstream for onboarding a new
device to a server, and this fails with Buildroot devices because the
modules are currently not installed.
Install the directory, script, and single-file modules by default, and
install the docker or rpm script if their respective packages are
selected.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Version 3 scripts have been supported since version 2.0 and should be the
default.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the following license file hashes due to copyright year changes:
- vendor/github.com/mendersoftware/mendertesting/LICENSE
- vendor/github.com/mendersoftware/mender-artifact/LICENSE
Remove hashes for the the following removed files:
- vendor/github.com/mendersoftware/log/LICENSE
- vendor/github.com/mendersoftware/scopestack/LICENSE
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the following license file hashes due to copyright year changes:
- vendor/github.com/mendersoftware/mendertesting/LICENSE
- vendor/github.com/davecgh/go-spew/LICENSE
- vendor/github.com/stretchr/testify/LICENSE
Add hashes for the the following new files:
- vendor/github.com/minio/sha256-simd/LICENSE
- vendor/gopkg.in/yaml.v2/LICENSE
- vendor/github.com/klauspost/compress/LICENSE
- vendor/github.com/russross/blackfriday/v2/LICENSE.txt
- vendor/github.com/klauspost/pgzip/LICENSE
- vendor/github.com/cpuguy83/go-md2man/v2/LICENSE.md
- vendor/github.com/shurcooL/sanitized_anchor_name/LICENSE
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Build will fail if gobject-introspection is built before network-manager
but python-gobject is not:
configure: error: "--enable-introspection aims to build the settings documentation. This requires GObject introspection for python (pygobject)
To avoid this build failure and because we don't need documentation,
just disable introspection
Fixes:
- http://autobuild.buildroot.org/results/d3b1bc2fa7559e66465033c455176761d6e184d1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-networkx wasn't upgraded for a while due to incompatibilities
with setools not supporting versions above 1.11. With the recent version
bump of setools this is no longer true and we can bump python-networkx
to 2.4.
The license checksum had to be updated while bumping the package, but
only the year of the copyright has changed.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix the following security issues:
- SERVER-45514 [FLE] Reject document validators with encryption-related
keywords if the validationAction is “warn”
- SERVER-48039 Unrecognized option: net.ssl.clusterCertificateSelector
in MongoDB v4.2
- SERVER-45803 mongodecrypt needs a ServiceContext
- SERVER-46834 Use monotonic time in UserCacheInvalidator
- SERVER-47113 LDAP connection pool acquisition state should own host
list
https://docs.mongodb.com/manual/release-notes/4.2
Also:
- Update indentation in hash file (two spaces)
- Tweak version to be "compliant" with https://release-monitoring.org
- Use official tarball
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
setools is no longer hosted on https://github.com/TresysTechnology/setools/.
Update the source location to its new home,
https://github.com/SELinuxProject/setools/.
Refresh patches 0001-remove-werror-flag-from-setup.patch and
0002-Do-not-export-use-setools.InfoFlowAnalysis-and-setoo.patch for
4.3.0 and remove patch 0003-setup.py-drop-path-prefix-from-man-install.patch
that is now upstream.
Add a new dependency on host-python-cython, as setup.py now depends on
it.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patch 0001-checkpolicy-remove-unused-te_assertions.patch is now part of
the upstream release 20200710.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Refresh patch 0002-Do-not-use-PYCEXT-and-rely-on-the-installed-file-nam.patch
for 3.1; and remove patch 0003-fix-building-against-musl-and-uclibc-libraries.patch
that is now upstream.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Patches 0002-libsepol-fix-CIL_KEY_-build-errors-with-fno-common.patch
and 0003-libsepol-remove-leftovers-of-cil_mem_error_handler.patch are
now upstream.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
oracle-mysql won't built its own bundled zlib since commit
6fed83a030 so don't unconditionally link
with zlib instead use mysql_config to retrieve cflags and libs as
suggested by Thomas Petazzoni in review of first iteration
Fixes:
- No autobuilder failures yet
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the new SAMA5D27 WLSOM1 Evaluation Kit with linux4sam_6.2
components. Update README file with new defconfigs and new
packages/website.
Signed-off-by: Eugen Hristev <eugen.hristev@microchip.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
86bd30a Restore ability to feed script file via stdin, using `-s -`.
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Retrieve first patch from upstream (BUILD_EXAMPLES is already in
CMakeLists.txt)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop all patches (already in version)
- Fix CVE-2018-21247: An issue was discovered in LibVNCServer before
0.9.13. There is an information leak (of uninitialized memory contents)
in the libvncclient/rfbproto.c ConnectToRFBRepeater function.
- Fix CVE-2019-20839: libvncclient/sockets.c in LibVNCServer before
0.9.13 has a buffer overflow via a long socket filename.
- Fix CVE-2019-20840: An issue was discovered in LibVNCServer before
0.9.13. libvncserver/ws_decode.c can lead to a crash because of
unaligned accesses in hybiReadAndDecode.
- Fix CVE-2020-14396: An issue was discovered in LibVNCServer before
0.9.13. libvncclient/tls_openssl.c has a NULL pointer dereference.
- Fix CVE-2020-14397: An issue was discovered in LibVNCServer before
0.9.13. libvncserver/rfbregion.c has a NULL pointer dereference.
- Fix CVE-2020-14398: An issue was discovered in LibVNCServer before
0.9.13. An improperly closed TCP connection causes an infinite loop in
libvncclient/sockets.c.
- Fix CVE-2020-14399: An issue was discovered in LibVNCServer before
0.9.13. Byte-aligned data is accessed through uint32_t pointers in
libvncclient/rfbproto.c.
- Fix CVE-2020-14400: An issue was discovered in LibVNCServer before
0.9.13. Byte-aligned data is accessed through uint16_t pointers in
libvncserver/translate.c.
- Fix CVE-2020-14401: An issue was discovered in LibVNCServer before
0.9.13. libvncserver/scale.c has a pixel_value integer overflow.
- Fix CVE-2020-14402: An issue was discovered in LibVNCServer before
0.9.13. libvncserver/corre.c allows out-of-bounds access via
encodings.
- Fix CVE-2020-14403: An issue was discovered in LibVNCServer before
0.9.13. libvncserver/hextile.c allows out-of-bounds access via
encodings.
- Fix CVE-2020-14404: An issue was discovered in LibVNCServer before
0.9.13. libvncserver/rre.c allows out-of-bounds access via encodings.
- Fix CVE-2020-14405: An issue was discovered in LibVNCServer before
0.9.13. libvncclient/rfbproto.c does not limit TextChat size.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit 'package/rpi-firmware: fix startup file names' ([1]) the
start and fixup file names are normalized to start.elf/fixup.dat,
adjust the rpi4 genimage config files accordingly.
Fixes:
ERROR: file(rpi-firmware/fixup4.dat): stat(.../images/rpi-firmware/fixup4.dat) failed: No such file or directory
ERROR: vfat(boot.vfat): could not setup rpi-firmware/fixup4.dat
[1] https://git.buildroot.net/buildroot/commit/?id=1bdc0334ff6273761b2e7fda730cdcc7e1f46862
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2020-7212 (1.25.2 - 1.25.7)
The _encode_invalid_chars function does not remove duplicate percent
encodings in the _percent_encodings array, which combined with the
normalization step could take O(N^2) time to compute for a URL of
length N. This results in a marginally higher CPU consumption
compared to the potential linear time achieved by deduplicating
the _percent_encodings array.
CC: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patches (already in version) and so drop autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove all patches (already in version)
- Move to meson-package
- Add new gsettings-desktop-schemas mandatory dependency
- gdu option doesn't exist anymore:
1db029df72
- Use new gcrypt otion
- systemd-login option has been replaced by logind option
- avahi option has been replaced by dnsd option
- gtk3 optional dependency has been removed since
dff13283c9
- Disable new sftp backend:
44d45dca5d
- Disable fuse (depends on fuse3 which is not available on buildroot)
- Remove gvfs-less workaround (not installed anymore)
- Update indentation of hash file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OP-TEE Test package version to OP-TEE release 3.9.0.
Drop patch on scripts/file_to_c.py that is merged in 3.9.0.
Add patch from [1] for related issue found in 3.9.0 xtest tool.
Add patch to default disable xtest regression test 1027 and 1028 that
mandate changes in Linux kernel OP-TEE driver that are not available
in mainline, at least as of Linux kernel v5.7.
[1] e1af176af2
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump OP-TEE OS package version to OP-TEE release 3.9.0.
Update patch on pydrypto/pycryptodome to match 3.9.0.
Add patch on CFG_OPTEE_REVISION_MINOR that was not updated in release
3.9.0 and fixed only few commits above.
Signed-off-by: Etienne Carriere <etienne.carriere@linaro.org>
Tested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version)
- Add zstd optional dependency, available since version 2.10.0 and
1f4758bd7f
- Use the new MZ_LIBBSD option available since version 2.10.0 and
29fcb47680
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Agent++ 4.3.1 does not build if SNMPv3 is disabled due to incorrect #ifdef
clauses, esulting in errors such as:
../include/agent_pp/notification_originator.h:232:39: error: 'snmpCommunityEntry' has not been declared
void set_snmp_community_entry(snmpCommunityEntry* communityEntryRef) {
^
../include/agent_pp/notification_originator.h:296:32: error: 'nlmLogEntry' has not been declared
void set_nlm_log_entry(nlmLogEntry* nlmLogEntryRef) {
^
../include/agent_pp/notification_originator.h:321:9: error: 'nlmLogEntry' does not name a type
nlmLogEntry* _nlmLogEntry;
^
Fixes:
http://autobuild.buildroot.net/results/d7a5fa5ba4ab6c9da23fcc93bf766be9ca630af3/http://autobuild.buildroot.net/results/40ce9bc4bed267dc762a0282a8da0ad1514ad7a8/
...
Fixes: 88355e967f ("package/agentpp: bump version to 4.3.1")
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prior to gzip 1.10, the compression pipeline used with PCF fonts was
not reproducible due to the implicit -N/--name injecting a timestamp:
$ cat /path/to/file | gzip > /path/to/file.gz
This updates Portable Compiled Format font packages to have a host-gzip
dependency, so gzip version 1.10 or newer will reliably be used.
This change does not affect encodings, which use a seemingly
synonymous compression pipeline, but that happens to be reproducible
with gzip versions at least as old as version 1.3.13:
$ gzip < /path/to/file > /path/to/file.gz
Reported-by: Jordan Speicher <jspeicher@xes-inc.com>
Signed-off-by: Aaron Sierra <asierra@xes-inc.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we delete /usr/share/bash-completion when bash is not enabled.
We need to delete /etc/bash_completion.d too. For example, the jo package
installs files there:
/etc/bash_completion.d/jo.bash
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some toolchains, like the Linaro gcc7 toolchains, now install libstdc++ debug
library symbols to /lib/debug, which can be as large as the library itself.
This commit removes the extra debug content if debugging is not enabled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removes BR2_PACKAGE_GPSD_PPS config option, since PPS functionality is
no longer optional and always enabled in gpsd's SCons configuration.
Removed passing ntpshm=y to SCons since that feature is also no longer
optional.
Added a patch adapted from changes merged upstream post-3.20 to fix a
build failure during cross-compilation when checking sizeof(time_t)
and where shared libraries were being linked with ld rather than g++.
Signed-off-by: Robert Hancock <hancock@sedsystems.ca>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes a patch to fix building with uclibc, where pdbg was
missing a header for ssize_t.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This was supposed to be part of
fce71d09fb, which introduced the
parprouted package, but due to a missed "git commit --amend", it
wasn't included in this commit, so let's add it now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix a side channel vulnerability in modular exponentiation that could
reveal an RSA private key used in a secure enclave.
- Fix side channel in mbedtls_ecp_check_pub_priv() and
mbedtls_pk_parse_key() / mbedtls_pk_parse_keyfile() (when loading a
private key that didn't include the uncompressed public key), as well
as mbedtls_ecp_mul() / mbedtls_ecp_mul_restartable() when called with
a NULL f_rng argument. An attacker with access to precise enough
timing and memory access information (typically an untrusted operating
system attacking a secure enclave) could fully recover the ECC private
key.
- Fix issue in Lucky 13 counter-measure that could make it ineffective
when hardware accelerators were used (using one of the
MBEDTLS_SHAxxx_ALT macros). This would cause the original Lucky 13
attack to be possible in those configurations, allowing an active
network attacker to recover plaintext after repeated timing
measurements under some conditions.
https://tls.mbed.org/tech-updates/security-advisories/mbedtls-security-advisory-2020-07
Switch to github to get latest release
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add a patch to fix build without fork in src/dhcpcd.c. This
regression was introduced in upstream commit
3063ebb6c8ac7c96196fa923cdd5f7c0384de23b, which was merged in dhcpcd
9.0.0. Therefore, Buildroot is affected since we bumped from 8.0.3
to 9.1.4 in commit 809f548e79, which
was applied after 2020.05
- Disable privsep as it unconditionally uses fork (privsep has been
enabled by default since version 9.0.0 and
3a4c2e5604)
Fixes:
- http://autobuild.buildroot.org/results/9fcc88abedcb8a02946f37837dcf4fff02f66c23
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2020-4030: In FreeRDP before version 2.1.2, there is an out of
bounds read in TrioParse. Logging might bypass string length checks
due to an integer overflow.
- Fix CVE-2020-4031: In FreeRDP before version 2.1.2, there is a
use-after-free in gdi_SelectObject. All FreeRDP clients using
compatibility mode with /relax-order-checks are affected.
- Fix CVE-2020-4032: In FreeRDP before version 2.1.2, there is an
integer casting vulnerability in update_recv_secondary_order. All
clients with +glyph-cache /relax-order-checks are affected.
- Fix CVE-2020-4033: In FreeRDP before version 2.1.2, there is an out of
bounds read in RLEDECOMPRESS. All FreeRDP based clients with sessions
with color depth < 32 are affected.
- Fix CVE-2020-11095: In FreeRDP before version 2.1.2, an out of bound
reads occurs resulting in accessing a memory location that is outside
of the boundaries of the static array
PRIMARY_DRAWING_ORDER_FIELD_BYTES.
- Fix CVE-2020-11096: In FreeRDP before version 2.1.2, there is a global
OOB read in update_read_cache_bitmap_v3_order. As a workaround, one
can disable bitmap cache with -bitmap-cache (default).
- Fix CVE-2020-11097: In FreeRDP before version 2.1.2, an out of bounds
read occurs resulting in accessing a memory location that is outside
of the boundaries of the static array
PRIMARY_DRAWING_ORDER_FIELD_BYTES.
- Fix CVE-2020-11098: In FreeRDP before version 2.1.2, there is an
out-of-bound read in glyph_cache_put. This affects all FreeRDP clients
with `+glyph-cache` option enabled.
- Fix CVE-2020-11099: In FreeRDP before version 2.1.2, there is an out
of bounds read in license_read_new_or_upgrade_license_packet. A
manipulated license packet can lead to out of bound reads to an
internal buffer.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
parprouted is a daemon for transparent IP (Layer 3) proxy ARP
bridging. This is useful for creation of transparent firewalls
and bridging networks with different MAC protocols. Also,
unlike standard bridging, proxy ARP bridging allows to bridge
Ethernet networks behind wireless nodes without using WDS or
layer 2 bridging.
https://www.hazard.maks.net/parprouted
Signed-off-by: Owen Walpole <owen@walpole.dev>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We need to update the location to point to the current maintained
upstream repo as well since the existing one is unmaintained.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The thing with Buildroot, is that we know in advance what will be in the
root filesystem. Therefore, we don't need SDL_image to probe for the
presence of libpng, libjpeg, libtiff or libwebp and dynamically load
them; SDL_image can be linked to them directly at compilation time.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Just like with libjpeg and libpng, we don't want libwebp to be
dynamically loaded by SDL_image at runtime.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This fixes the following flake8 warning:
support/scripts/pkg-stats:1005:9: E117 over-indented
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With python 3, when a package has a version number x-y-z instead of
x.y.z, then the version returned by LooseVersion can't be compared
which raises a TypeError exception:
Traceback (most recent call last):
File "./support/scripts/pkg-stats", line 1062, in <module>
__main__()
File "./support/scripts/pkg-stats", line 1051, in __main__
check_package_cves(args.nvd_path, {p.name: p for p in packages})
File "./support/scripts/pkg-stats", line 613, in check_package_cves
if pkg_name in packages and cve.affects(packages[pkg_name]):
File "./support/scripts/pkg-stats", line 386, in affects
return pkg_version <= cve_affected_version
File "/usr/lib64/python3.8/distutils/version.py", line 58, in __le__
c = self._cmp(other)
File "/usr/lib64/python3.8/distutils/version.py", line 337, in _cmp
if self.version < other.version:
TypeError: '<' not supported between instances of 'str' and 'int'
This patch handles this exception by adding a new return value when
the comparison can't be done. The code is adjusted to take of this
change. For now, a return value of CVE_UNKNOWN is handled the same way
as a CVE_DOESNT_AFFECT return value, but this can be improved later
on.
Signed-off-by: Gregory CLEMENT <gregory.clement@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bitwise is multi base interactive calculator supporting dynamic base
conversion and bit manipulation. It's a handy tool for low level
hackers, kernel developers and device drivers developers.
Signed-off-by: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the Boost ODB profile library. The Boost profile
provides support for persisting Boost smart pointers, containers, and
value types with the ODB system.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the MySQL ODB runtime library. Every application
that includes code generated for the MySQL database will need to link
to this library.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the PostgreSQL ODB runtime library.
Every application that includes code generated for the PostgreSQL
database will need to link to this library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect license, remove unneeded dependency on host-odb]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package contains the common ODB runtime library. Every application
that includes code generated by the ODB compiler will need to link to this
library.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel:
- Fix incorrect license
- Remove unneeded dependency on host-odb]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
ODB is an open-source, cross-platform, and cross-database
object-relational mapping (ORM) system for C++. It allows you to
persist C++ objects to a relational database without having to deal
with tables, columns, or SQL and without manually writing any mapping
code.
ODB supports MySQL, SQLite, PostgreSQL, Oracle, and Microsoft SQL
Server relational databases as well as C++98/03 and C++11 language
standards. It also comes with optional profiles for Boost and Qt
which allow you to seamlessly use value types, containers, and smart
pointers from these libraries in your persistent C++ classes.
This package is used for auto-generating ODB specific header files
into useable code that can be linked against a seperate libodb and a
specific libodb database library. As such, it is only needed as a
host program and is not user selectable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Kamel: Fix incorrect odb license]
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
[Thomas: add patch fixing gcc10 build, add references to upstream
commits]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages requires support on the build machine to create gcc
plugins. This commit adds a blind option,
BR2_NEEDS_HOST_GCC_PLUGIN_SUPPORT, which such packages can
select. When this option is enabled, the logic in support/dependencies
verifies that everything needed on the build machine to build gcc
plugins is available.
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libcutl is distributed in source code and includes the standard autotools
build system as well as the VC++ project files. It is a dependency for odb.
Because ODB is a host-only package, and no other package depends on libcutl,
this package will also be a host-only package.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Kamel Bouhara <kamel.bouhara@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP.
License was updated from:
LA_OPT_NXP_Software_License v10 December 2019
to:
LA_OPT_NXP_Software_License v11 February 2020
which explains the change of EULA/COPYING license files.
Tested-by: Julien Olivain <julien.olivain@oss.nxp.com>
[Julien: tested on i.MX8M Mini EVK Rev A with LPDDR4]
Tested-by: Stephane Viau <stephane.viau@oss.nxp.com>
[Stephane: tested on i.MX8MQ and i.MX8MN]
Tested-by : Maeva Manuel <maeva.manuel@oss.nxp.com>
[Maeva: tested on i.MX8QM MEK rev B0 and i.MX8QXP MEK rev B0]
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This version is aligned with 5.4.24_2.1.0 NXP Linux BSP.
Firmware file names now include the SoC revision.
In order not to break the compatibility with the imx-seco 2.3.1
package, it remains B0 support for i.MX8QXP MEK. C0 support should
introduce a Kconfig option and this will be done in a future patch.
License was updated from:
LA_OPT_NXP_Software_License v10 December 2019
to:
LA_OPT_NXP_Software_License v11 February 2020
which explains the change of EULA/COPYING license files.
Tested-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
[Maeva: tested on i.MX8QXP MEK (Board rev D1, SoC rev B0)
and on i.MX8QM MEK (SoC rev B0)]
Signed-off-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These options were only added in commit
6bb7f3b810, which was made after the
2020.05 release. So they are not part of any release at this point,
which makes legacy handling unnecessary.
Reported-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes for 0.4.3.5: https://blog.torproject.org/node/1872
"Tor 0.4.3.5 is the first stable release in the 0.4.3.x series."
Release notes for 0.4.3.6: https://blog.torproject.org/node/1900
The fix for CVE-2020-15572 "Fix a crash due to an out-of-bound memory
access when Tor is compiled with NSS support" does not affect buildroot
because we do not support building tor with libnss.
Rebased patch 0001.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The newly introduced BR2_PACKAGE_FIRMWARE_IMX_NEEDS_xxx symbols are
used in lieu of the SoC type when installing images or binaries on
target.
Suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some SoCs need a HDMI FW for their bootloader, some other require
EPDC, SDMA and/or VPU.
Instead of trying to "guess" what firmware images need to be installed
in firmware-imx.mk, let the Config framework do the job and allow each
SoC to pick what firmware they need.
Note that this patch should also help introducing an eventual DP FW,
as Gary mentioned in a separate thread [1].
[1] http://lists.busybox.net/pipermail/buildroot/2020-May/283181.html
Suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The DDR FW along with all other FW code that need to be used in
bootloader or installed on target are related to the firmware-imx
package.
This patch does this job as well as fixing the conjugation of NEED*s*
in the symbol name. Also take advantage of this patch to make the DDR
FW dependant on BR2_PACKAGE_FIRMWARE_IMX.
In addition, the BR2_PACKAGE_FIRMWARE_DDRFW_* option was incorrect, as
there is no package matching this name. So we rename them to
BR2_PACKAGE_FIRMWARE_IMX_*, and add the appropriate Config.in.legacy
handling.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In a patch set that did not get in for other reasons, Sebastien proposed
to fix the install path directory of the sdma and vpu firmware code [1]:
"Mainline and NXP kernels expect the sdma firmware to be in
/lib/firmware/imx/sdma so fix the install path [...]"
By looking at the code, I believe this is correct even though I have no
means to test it.
[1] http://lists.busybox.net/pipermail/buildroot/2020-June/284875.html
Suggested-by: Sébastien Szymanski <sebastien.szymanski at armadeus.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a minor release which provides fixes for CVE-2020-9800,
CVE-2020-9802, CVE-2020-9803, CVE-2020-9805, CVE-2020-9806,
CVE-2020-9807, CVE-2020-9843, CVE-2020-9850, and CVE-2020-13753.
Updating from 2.28.2 also brings in the usual batch of fixes, including
important improvements to threading in the media player. Full release
notes can be found at:
https://webkitgtk.org/2020/07/09/webkitgtk2.28.3-released.html
A detailed security advisory can be found at:
https://webkitgtk.org/security/WSA-2020-0006.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a minor release which provides fixes for CVE-2020-9800,
CVE-2020-9802, CVE-2020-9803, CVE-2020-9805, CVE-2020-9806,
CVE-2020-9807, CVE-2020-9843, CVE-2020-9850, and CVE-2020-13753.
Updating from 2.28.2 also brings in the usual batch of fixes, including
important improvements to threading in the media player. Full release
notes can be found at:
https://wpewebkit.org/release/wpewebkit-2.28.3.html
A detailed security advisory can be found at:
https://wpewebkit.org/security/WSA-2020-0006.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the CONFIG_PCI symbol due a change in kernel 5.0 [1].
The option was previously enabled by default (default y).
"PCI: consolidate PCI config entry in drivers/pci
There is no good reason to duplicate the PCI menu in every architecture.
Instead provide a selectable HAVE_PCI symbol that indicates availability
of PCI support, and a FORCE_PCI symbol to for PCI on and the handle the
rest in drivers/pci."
Qemu aarch64 provide a PCIe Host bridge but it require CONFIG_PCI_HOST_GENERIC
enabled in the kernel.
With CONFIG_PCI_HOST_GENERIC enabled PCIe host bridge is detected:
$ dmesg
pci-host-generic 4010000000.pcie: host bridge /pcie@10000000 ranges:
pci-host-generic 4010000000.pcie: IO 0x3eff0000..0x3effffff -> 0x00000000
pci-host-generic 4010000000.pcie: MEM 0x10000000..0x3efeffff -> 0x10000000
pci-host-generic 4010000000.pcie: MEM 0x8000000000..0xffffffffff -> 0x8000000000
pci-host-generic 4010000000.pcie: ECAM at [mem 0x4010000000-0x401fffffff] for [bus 00-ff]
pci-host-generic 4010000000.pcie: PCI host bridge to bus 0000:00
pci_bus 0000:00: root bus resource [bus 00-ff]
pci_bus 0000:00: root bus resource [io 0x0000-0xffff]
pci_bus 0000:00: root bus resource [mem 0x10000000-0x3efeffff]
pci_bus 0000:00: root bus resource [mem 0x8000000000-0xffffffffff]
pci 0000:00:00.0: [1b36:0008] type 00 class 0x060000
$ lspci
00:00.0 Host bridge: Red Hat, Inc. QEMU PCIe Host bridge
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=eb01d42a77785ff96b6e66a2a2e7027fc6d78e4a
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Qemu for the aarch64 virt emulate an RTC PL031 device.
Enable the kernel support to allow setting the system time.
"date" now return the current time:
Sun Jul 5 20:38:50 UTC 2020
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also separate the fields in the hash file by two spaces and change the
hash of the license file (copyright message changed from 2019 to 2020).
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following CVEs:
- CVE-2019-19923 (Fixed in 3.31.0)
SQLite is vulnerable to denial-of-service condition because of a NULL
pointer dereferencing while handling `SELECT DISTINCT`statements.
- CVE-2019-19924 (Fixed in 3.31.0)
The SQLite mishandles certain SQL commands due to improper error
handling by ` sqlite3WindowRewrite() ` function.
- CVE-2020-13435 (Fixed in 3.32.1)
SQLite is vulnerable to denial-of-service (DoS) due to improper handling
of query rewriting. An attacker could exploit this vulnerability by
supplying a system with maliciously crafted input.
- CVE-2020-13632 (Fixed in 3.32.0)
SQLite is vulnerable to denial-of-service (DoS) due to improper pointer
management in the FTS3 virtual table module. An attacker could exploit
this vulnerability by supplying a system with maliciously crafted input.
- CVE-2020-13434 (Fixed in 3.32.1)
SQLite is vulnerable to denial-of-service (DoS) due to improper handling
of floating-point operations. An attacker could exploit this
vulnerability by supplying a system with maliciously crafted input.
- CVE-2020-13871 (Fixed in 3.32.3)
SQLite 3.32.2 has a use-after-free in resetAccumulator in select.c
because the parse tree rewrite for window functions is too late.
- CVE-2020-13630 (Fixed in 3.32.0)
SQLite is vulnerable to denial-of-service (DoS) due to a use after free
issue in the FTS3 virtual table module. An attacker could exploit this
vulnerability by supplying a system with maliciously crafted input.
- CVE-2020-15358 (Fixed in 3.32.3)
SQLite is vulnerable to a heap-based buffer overflow flaw in part of an
optimization feature. An attacker able to issue specially crafted
queries could cause the application to crash, resulting in a
denial-of-service (DoS).
- CVE-2020-9327 (Fixed in 3.32.0)
SQLite is vulnerable to a Null pointer dereference flaw. A remote
attacker able to issue specially crafted SQL statements may be able to
cause a segmentation fault and application crash, resulting in a
denial-of-service (DoS).
- CVE-2019-19645 (Fixed in 3.31.0)
It was discovered that SQLite contains an denial-of-service (DoS)
vulnerability. An attacker could exploit this to trigger an infinite
recursion resulting in excessive resource consumption leading to a DoS
condition.
- CVE-2019-19926 (Fixed in 3.31.0)
The SQLite allows denial-of-service attack due to improper input
validation of user-supplied input.
- CVE-2020-11655 (Fixed in 3.32.0)
SQLite contains a memory corruption vulnerability. Successfully
exploiting this issue may allow attackers to cause a denial-of-service
(DoS). This allows an attacker to cause SQLite to crash by issuing a
crafted SQL query to the database.
- CVE-2019-19925 (Fixed in 3.31.0)
The INSERT statement fails when the zip file path is `NULL`.
- CVE-2019-19242 (Fixed in 3.31.0)
SQLite is vulnerable to a denial-of-service (DoS). An attacker could
exploit this vulnerability by supplying a maliciously crafted query to
cause an application crash.
- CVE-2019-19244 (Fixed in 3.31.0)
SQLite is vulnerable to a denial-of-service. An attacker could exploit
this vulnerability by providing a crafted SELECT statement to the SQL
server, resulting in an application crash.
- CVE-2020-13631 (Fixed in 3.32.0)
SQLite is vulnerable to data manipulation due to improper management of
virtual tables. An attacker could exploit this vulnerability by
supplying a system with maliciously crafted input.
- CVE-2020-11656 (Fixed in 3.32.0)
SQLite contains a Use-After-Free vulnerability. Successfully exploiting
this issue may allow attackers to cause a denial-of-service (DoS). This
allows an attacker to cause SQLite to crash by issuing a crafted SQL
query to the database.
- CVE-2019-19880 (Fixed in 3.31.0)
SQLite is vulnerable to denial-of-service (DoS) due to the mismanagement
of memory resources. A remote attacker could cause a victim's instance
of the application to crash by submitting crafted request that will lead
to the application parsing problematic integer values.
- CVE-2019-20218 (Fixed in 3.31.0)
SQLite is vulnerable to denial-of-service (DoS) due to improper
exception handling which could lead to unwinding of the `WITH` stack
following parsing errors. An attacker could exploit this vulnerability
by supplying a system with maliciously crafted input.
- CVE-2019-19603 (Fixed in 3.31.0)
It was discovered that SQLite contains a denial-of-service (DoS)
vulnerability. An authenticated attacker could exploit this
vulnerability by creating tables with the same name as shadow table
names.
- CVE-2019-19959 (Fixed in 3.31.0)
SQLite is vulnerable to denial-of-service (DoS) due to the mismanagement
of system memory resources. A remote attacker could cause a victim's
instance of the application to crash by causing it to process a SQL
statement that references a maliciously crafted file name.
- CVE-2019-19646 (Fixed in 3.31.0)
SQLite is vulnerable to a denial-of-service (DoS). An attacker could
exploit this vulnerability by supplying malicious SQL in order to crash
the application.
- CVE-2019-19317 (Fixed in 3.31.0)
SQLite contains a denial-of-service (DoS) vulnerability due to incorrect
logic in name lookups. An attacker could exploit this to cause a
application crash.
Signed-off-by: Sam Voss <sam.voss@rockwellcollins.com>
CC: Peter Korsgard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 30f1decec2 (package/python-greenlet: enable only on supported
architectures) forgot to allow x86_64.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr: split off the x86_64 support to its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 30f1decec2 (package/python-greenlet: enable only on supported
architectures) mis-typed the architecture name fox 286-32: BR2_x86
doesn't exist in buildroot; it is BR2_i386.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- just do the s/x86/i386/ fix for easy backport
- x86_64 split off to its own patch
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Chris Packham <judge.packham@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
For 5.6 and 5.7 support.
git shortlog --invert-grep --grep=Travis --no-merges ec654ee9caeb0c4348caacd0cf5eb2730d1d70e2..
Jonathan Liu (2):
mali: Fix build for 5.6
mali: Fix build for 5.7
Maxime Ripard (3):
Create travis.yml
actions: Add feedparser to the host
travis: Try to fix the push code
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch enables systemd support in the refpolicy by turning on the
'SYSTEMD' policy build option when systemd is enabled in Buildroot. This
enables conditional rules in SELinux policy modules (by defining
'init_systemd'), to better support systemd.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also change the hash file to separate the fields by two spaces and
change the hash of the license (copyright year changed from 2019 to
2020).
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable parallel building by substituting $(MAKE1) with $(MAKE) in
libnss.mk. Parallel Makefile building has been added after version 3.53
so now it's time to enable it in Buildroot to save building time.
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also:
- License file renamed LICENSE -> License
- Change license hash because copyright year changed 2019 -> 2020
- Separate the fields in the hash file by two spaces
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, the linux and linux-with-shared-libraries configurations
depend on OpenSSL, but with some trickery we can drop this dependency
like the linux-no-openssl configuration does.
Also separate the fields in the hash file by two spaces.
Signed-off-by: Sergio Prado <sergio.prado@e-labworks.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Video4Linux2 plugins can udev for device probing and monitor.
This greatly improves load time and monitoring performance.
It also enables hotplug monitoring for cameras.
gstreamer is libglib2-based; libgudev is libnglib2-based. So they both
have the same basic dependencies as liblib2 has, and thus propagating
the dependencies of libgudev is not necessary (but might be confusing in
the future, even though such a change is highly unlikely...)
Signed-off-by: Nicolas Dufresne <nicolas.dufresne@collabora.com>
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Qmake configured packages will, by default, use the absolute HostPrefix/Sysroot
pathes set during configuration/building of qt5base for their install
destinations.
For the per-package host/staging infrastructure, this causes non-qt5base
packages to litter the qt5base folders. In addition, buildroots target-install
step subsequently fails because the respective files are missing from the
per-package sysroot of the package itself.
Fortunately, qmake's built-in pathes can be overridden by placing a custom
qt.conf next to the qmake binary. This is already used to facilitate SDK
relocation. So for per-package path manipulation we can reuse that method, but
need to change the host/sysroot values according to each per-package
path.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Reviewed-by: Yann E. MORIN <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: drop useless 'rm -f' of generated file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
riscv64 support was added upstream in commit:
26fa1b9e6b
which is included in version >= 1.10.0.
Now, of the riscv architecture, only the 32-bit variant is not
supported, so change the arch restriction to that.
Signed-off-by: Julien Olivain <juju@cotds.org>
[yann.morin.1998@free.fr: reword commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Commit 0737f48c5f (package/poco: disable build for riscv) did not
propagate the new dependency on BR2_riscv to the comment.
Introduce BR2_PACKAGE_POCO_ARCH_SUPPORTS to solve this issue.
Signed-off-by: Julien Olivain <juju@cotds.org>
[yann.morin.1998@free.fr:
- reword the commit log
- use separate 'depend on !arch'
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
cups-browsed service is compiled and installed by the package,
but the corresponding services file were not installed for
systemv and systemd.
Specifying --without-rcdir allows to not install the init script
provided with cups-filters, and we provide our own,
Buildroot-compatible init script.
For systemd, we install the upstream-provided service file.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that binutils 2.34 has been introduced, and we have moved to
2.33.1 as the default version, it is time to drop support for binutils
2.31.1.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that binutils 2.34 has been released, it is time to move to
binutils 2.33.1 as the default binutils version, instead of 2.32.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There was a missing space between the append-assignment operator, and
the appended list of licenses.
Even though inconsequential technically speaking, we always use spaces
around operators elsewhere in the code.
So be it here too.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
remove merged patches.
LICENSE diff:
- Copyright (c) 2002-2015 Matt Johnston
+ Copyright (c) 2002-2020 Matt Johnston
- LibTomCrypt and LibTomMath are written by Tom St Denis, and are Public Domain.
+ LibTomCrypt and LibTomMath are written by Tom St Denis and others, see
+ libtomcrypt/LICENSE and libtommath/LICENSE.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
this package allows to use optionally bundled libraries (which is exceptional in BR).
so, license infos must be conditional.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
boost/detail/endian.hpp has been marked as deprecated since boost 1.69.0.
This file and boost/predef/detail/endian_compat.h are no more available.
This patch suppress this header in some file, where not needed and move
to correct header and new constants. It's retrocompatible for at least all boost release > 1.69.0
[Upstream status: http://lists.osmocom.org/pipermail/osmocom-sdr/2020-June/002080.html]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Removed patch (already in version).
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The output of 'find' depends on the directory entries, and is not
ordered. As a consequence, the cpio archive is not reproducible.
Fix that by sorting the output of find. Use the 'C' locale to enforce
reproducibility that does not depend on the locale.
The command line is now pretty long, so we wrap it.
Signed-off-by: Yurii Monakov <monakov.y@gmail.com>
[yann.morin.1998@free.fr:
- use LC_ALL=C when sorting
- wrap long line
- reword commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Before now, U-Boot SPL could only load the Platform Management Unit
(PMU) by patching the board-specific pm_cfg_obj.c file into the generic
PMU firmware, but that then requires generating a new PMU firmware for
every board configuration. To fix that, Luca Ceresoli added support to
U-Boot to load the pm_cfg_obj[1].
Like the PMU firmware, we need a way to pass the PMU cfg to U-Boot
during build. U-Boot only accepts the binary format of the cfg, so we
must convert the source file with the tool provided with U-Boot.
[1] https://lucaceresoli.net/zynqmp-uboot-spl-pmufw-cfg-load/
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
When using precompiled headers, changing any macros defined on the
command line will invalidate the precompiled header. With
toolchain-wrapper adding __DATE__ and __TIME__, any commits to Buildroot
will invalidate incremental builds regardless of whether the precompiled
header actually uses those values (affecting _OVERRIDE_SRCDIR).
GCC-7 and later support SOURCE_DATE_EPOCH and use it to define __DATE__
and __TIME__ internally, avoiding any impact on precompiled headers.
Disable the custom handling in toolchain-wrapper if GCC is version 7 or
newer.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Set the rundir to /run/lttng, if systemd is the init system.
/var/run is "legacy" in systemd's view.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also update hash file formatting (2 spaces).
License files got moved into a subfolder,
use those new paths.
Also the package is (L)GPL only, so remove the
"or higher".
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When booting, a Raspberry Pi will load the appropriate start files,
depending on the provided configuration. For example, if the config.txt
file contains ’gpu_mem=16’ the board will automatically load the
cut-down startup files (start_cd.elf and fixup_cd.dat on non-Rpi4).
Unfortunately, even when the appropriate version is selected in the
configuration menu, if the rpi-firmware makefile takes the good files,
it renames them to non-qualified, i.e. start.elf and fixup.dat. But as
these are not the files searched by the Raspberry Pi, the board will not
start.
This patch will set the names of the files to load as constant in the
config.txt file. This guarantees that the rpi firmware blobs do not take
any other corner-case decision based on any other as-yet unknown
conditions.
This eases the maintenance, as only the names of the source files
matter; the destination filenames are constants, and so are the
filenames in config.txt.
Fixes: #13026
Signed-off-by: Stéphane Veyret <sveyret@gmail.com>
[yann.morin.1998@free.fr:
- very minor fix in commit title
- drop the non-conditional macro and move its content into
RPI_FIRMWARE_INSTALL_IMAGES_CMDS
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
now, BR2_PACKAGE_DROPBEAR_LEGACY_CRYPTO works like with version 2019.78
and as described in Config.in
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The libsodium dependency is no longer needed so this patch also drops
that requirement from host and target builds.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
BSD style locks such as implemented by flock are translated to POSIX
advisory file locks (implemented by the fcntl system call on Linux). It
is not possible to lock a directory using POSIX advisory file locks.
Hence, the lock strategy used by Buildroot doesn't work when used over
NFS.
Using flock on a simple file works correctly though, so use a '.lock'
file inside the download directory instead. If the lockfile does not
exist, flock will create it (in a race-free fashion).
Tested using NFS v4.2 and Linux 5.4.43.
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@savoirfairelinux.com>
[yann.morin.1998@free.fr:
- slightly expand commit log about creation of the lockfile
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
We are using autotools build system for sdl2, so the sdl2-config.cmake
include path are not resolved like for sdl2-config script [1].
Remove sdl2-config.cmake file and avoid unsafe include path if this
file is used by a cmake based package.
This trigger an issue with ogre 1.12.6 package that replaced
FindSDL2.cmake by sdl2-config.cmake [2].
Thanks to Pavel Rojtberg for the help [3].
[1] https://bugzilla.libsdl.org/show_bug.cgi?id=4597
[2] 6de6f9b408
[3] https://github.com/OGRECave/ogre/issues/1568
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Soem versions are tagged, but not tarballed, so we need to be able to
retrieve them from git.
Usually, we do not have a default value for the repository, but unlike
for the kernel or the various bootloaders, the most prominent repository
for Xeniomai is upstream's official one (for the reason above, amongst
others), so we use that as a default.
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The xenomai version is decided in Kconfig, but the default value is
set in the .mk. This is unlike the other packages that have a version
choice (like linux, uboot...).
Move the value into Config.in.
This paves the way to using other custom sources, like from a git tree.
Note however that any existing configuration will need to be adapted to
the new settings. Adding legacy handling is non-trivial, so manual
intervention will be required.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Jan Kiszka <jan.kiszka@siemens.com>
cc: Romain Naour <romain.naour@gmail.com>
Cc: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if gcc 8 is still maintained for some time (gcc 8.5 is pending),
switch to gcc 9.x since it has been released since 2019-05-03 and
gcc 10.x is available since 2020-05-07.
We have been having toolchains in the autobuilders with gcc
9.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to add gcc 10 support for internal and external toolchain in
follow-up commits, introduce BR2_TOOLCHAIN_GCC_AT_LEAST_10 symbol.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Notes:
- json-c now uses cmake instead of autoconf
- This version also brings support to the much welcomed feature for
parsing uint64_t types
Signed-off-by: Christopher Pelloux <git@chp.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The OpenSBI platform 'qemu/virt' has been removed in v0.8. Builds for
the QEMU 'virt' machine can use the 'generic' platform instead.
Tested with qemu_riscv32_virt_defconfig and
qemu_riscv64_virt_defconfig using Buildroot host-qemu 5.0.0.
Signed-off-by: Mark Corbin <mark@dibsco.co.uk>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CVE-2020-8177: curl overwrite local file with -J.
CVE-2020-8169: Partial password leak over DNS on HTTP redirect.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libnids can be built against an existing libnet lib,
take advantage of that.
Unfortunately, pkg-config is not available for libnet,
so configure --with-libnet is our only option at the
moment.
--with-libnet expects a build directory,
not an installation path like in our context.
We use --with-libnet=yes to skip tests that would fail.
In this situation, 'LIBNET' goes undefined, so we
need to define it ourselves.
This works because we make sure -lnet is installed
prior anything related to libnids.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[yann.morin.1998@free.fr: slightly compact the code]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Includes a number of bugfixes and updates to build against newer stable
kernels.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Update to the latest version of the PRU software support [1].
There are minor changes to the license file mostly dates and versions --
notably pulling in several Linux kernel 5.4 header files in place of the
4.19 versions. As there is no longer a dependency on the kernel types.h
header, there's no longer a GPL-2.0 licensed component.
Also drop the useless comment that just repeats the URL.
[1] https://git.ti.com/cgit/pru-software-support-package/pru-software-support-package
Signed-off-by: Ash Charles <ashcharles@gmail.com>
[yann.morin.1998@free.fr: drop the URL-as-comment]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
stream split clients module has been added in version 1.11.3 with
6c2b086d0e
and is enabled by default, add an option to be able to disable it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch fix the irrlicht makefile which contains the paths
that point to the host system libraries that are not used and
are not available in Buildroot what's unsafe for cross-compilation.
In addition it fixes linking to the X11 libraries and the following errors:
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XSetSelectionOwner'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glXGetProcAddress'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glXMakeCurrent'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XF86VidModeSetViewPort'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XF86VidModeSwitchToMode'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glClearDepth'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XGetVisualInfo'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `XGrabKeyboard'
/home/bartekk/buildroot/output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-gnueabihf/9.2.0/../../../../arm-buildroot-linux-gnueabihf/bin/ld: /home/bartekk/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libIrrlicht.so: undefined reference to `glMatrixMode'
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
CPython 3.8 has added a new Syntax Warning that print
a waring at runtime while unsing gdb python support.
$ gdb -ex "python import os"
/usr/share/gdb/python/gdb/command/prompt.py:48: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if self.value is not '':
/usr/share/gdb/python/gdb/command/prompt.py:60: SyntaxWarning: "is not" with a literal. Did you mean "!="?
if self.value is not '':
Backport an upstream patch for this:
https://sourceware.org/git/?p=binutils-gdb.git;a=commitdiff;h=b6484282f85bf7f11451b2441599c241d302ad9d
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libnids can make use of libglib2 for multi-threading support, so use
that when available.
The configure.in script is flawed: passing either --enable-libglib or
--disabel-libglib will both disable support for libglib. Only when
neither is passed will the autodetection test be executed, at which
point (hopefully) libglib2 will be enabled if found.
So, unlike our usual practice, we can;t explcitly enable it; we can only
explicitly disable it, and rely on autodetection to enable it.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[yann.morin.1998@free.fr:
- add missing dependency on libglib2
- expand commit log to explain why we don't --enable-libglib
- add a simmilar blurb in the .mk
- fix condition, use positive logic since we have an else-clause
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Apitrace is affected by Gcc Bug 68485 that has already been worked
around, but after version bumping, CMakeLists.txt adds -O2 to
CMAKE_C_FLAGS_RELWITHDEBINFO that is in order appended to
CMAKE_C_FLAGS, making -O0 end appending to fail. To prevent this we
need to avoid CMAKE_C_FLAGS_RELWITHDEBINFO to be appended to
CMAKE_C_FLAGS, so let's do the same as flare-engine package that set
CMAKE_BUILD_TYPE to a fake build type called "buildroot", this way -O2
won't be appended after -O0 and work around restart to work as
expected.
Fixes:
http://autobuild.buildroot.net/results/2e3/2e31abd7b115d4c29117ca82007fd4f87f853ff7/
Signed-off-by: Giulio Benetti <giulio.benetti@benettiengineering.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package needed to be updated to be aligned with NXP BSP
5.4.3_1.0.0. It only updates the i.MX8 VPU firmware files.
The license files have changed due to:
- update to LA_OPT_NXP_Software_License v10 December 2019
- addition of Crank, EmSA and TARA Systems restrictions
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: extend commit log according to details provided by Gary
Bisson]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
stream geo module has been added in version 1.11.3 with
bb790f5d30
and is enabled by default, add an option to be able to disable it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
stream return module has been added in version 1.11.2 with
a7c6f8c1d7
and is enabled by default, add an option to be able to disable it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
stream map module has been added in version 1.11.3 with
05db6ddfa1
and is enabled by default, add an option to be able to disable it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
On some legacy systems, the X11 headers and libs are in /usr/X11R66/include
and /usr/X11R66/lib, and of course, some packages are trying to be smart
and use those paths (even when they do not exist).
Add those to the list of unsafe paths to check in the toolchain wrapper.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libnids is a C based networking library, part of networking intrusion
detection tools. It can watch network traffic & provide informations.
Signed-off-by: Guillaume W. Bres <guillaume.bressaix@gmail.com>
[Thomas:
- only needs libpcap as a mandatory dependency
- add patch to fix libpcap detection
- pass install_root= at installation time
- drop glibc dependency, it builds fine with uclibc]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
9adede5 Bumped version to 1.9.12
7487642 Merge pull request #40 from PrinterFranklin/fix_memory_leak
cbef34b fix a memory leak in havege_destroy
02674ae Updated ChangeLog
1ce2092 Update README.md
b77e7db Create README.md
f5bd6fa Updated version to v1.9.11
68b1d84 Merge branch 'master' of https://github.com/jirka-h/haveged
fb12bb3 updated fedora.spec
b162c91 Merge pull request #35 from eworm-de/private-tmp
b839803 Merge pull request #34 from Chocobo1/gh_action
4a0a008 Replace @SBIN_DIR@ in haveged.service file with actual path
c216a6f Moved haveged.spec to fedora.spec
2098470 fix ordering cycle with private tmp
7cd68e1 Add GitHub Actions continuous integration script
ebe97f0 Fixed time format
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch which was applied upstream.
Updated license hash due to copyright year update:
c2fdf919cf
Removed "v" from _SITE due to changes to github release names.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CBC ciphers, 3DES and hmac-sha1-96 are now disabled by default.
LICENSE: curve25519-donna under BSD-3c was replaced by curve25519.c under
Public domain
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without this patch, openssl_abyss is enabled if openssl is built before
libxmlrpc
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
* CVE-2020-13777: It was found that GnuTLS 3.6.4 introduced a
regression in the TLS protocol implementation. This caused the TLS
server to not securely construct a session ticket encryption key
considering the application supplied secret, allowing a MitM
attacker to bypass authentication in TLS 1.3 and recover previous
conversations in TLS 1.2
Release announcement:
https://lists.gnupg.org/pipermail/gnutls-help/2020-June/004648.html
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Drop patch (already in version) and so autoreconf
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This patch is not needed since version 3.19 and
e3ec42e08a
So drop this patch and set CCFLAGS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: s/GPS_CFLAGS/GPSD_CFLAGS/ ]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Drop patch (not needed anymore) as console.h has been updated with:
#if HAVE_SYS_SELECT_H
#include <sys/select.h>
#endif
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Upstream dropped python 2.x support, so add a dependency on python3:
f8608f4537
And adjust the .hash spacing for the new agreements.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The LICENSE file is MIT, not BSD. The confusion comes from the license info
in setup.py, which stated BSD until (post-0.14.2):
669129a3d3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Add a patch to fix build without ssse3.
Update the license hash due to various changes since August 2019 [0]:
- some files were relicensed from GPL-2.0+ to LGPL-2.1+; no impact on
the licensing information;
- clarification about the licensing when linked with external
libraries, which now requires passing --enable-version3; Buildroot
is not concerned, because it passes --disable-version3;
- various clarification about applicable licensing terms.
[0] http://git.videolan.org/?p=ffmpeg.git;a=history;f=LICENSE.md;h=613070e1b631a919a74c862f2a75a0f249a631ff;hb=8e12af29d1a3f95c9e952d78354e3c8b1c0431a8
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr:
- fix the SoB order in the patch
- clarify the impact of the licensing changes
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
There is now a LICENSE.txt file, so let's use it as the license file
instead of setup.py. It does contain the MIT license text, as
expected.
Signed-off-by: Grzegorz Blach <grzegorz@blach.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version)
- Add -std=c++11 to fix the build with gcc 4.8 as it has been removed by
upstream since version 1.0.0 and
2558902f0b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libogg is not only used for voicemail plugin, it is an optional
dependency of:
- audiobridge plugin since version 0.9.3 and
53761d07c5
- streaming plugin since version 0.9.3 and
d9aa1cec84
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1ebb35ee5f changed the libopenssl
target architecture to 'linux-generic64' for 64-bit archs based on
BR2_ARCH_IS_64. However, MIPS64n32 has BR2_ARCH_IS_64 set, but is a 32-bit
ABI. On such board, libopenssl needs to be configured with linux-generic32
to function properly.
One symptom of this problem is that ssh-keygen hangs on key generation,
waiting for more random bits. See [1] for the discussion with openssl
upstream.
Thanks to Ronny Meeus for investigating the issue and kudos to the openssl
community for their responsive and helpful interaction!
Reported-by: Ronny Meeus <ronny.meeus@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
[1] https://mta.openssl.org/pipermail/openssl-users/2020-June/012565.html
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Enable build for musl libc. glibc specific code is now behind __GNUC__.
Add a patch to fix collision with kernel defined struct sysinfo.
Drop attr dependency. Not used anymore.
Make keyutils an optional dependency. Detected at config time.
Enable static build now that keyutils is not a mandatory dependency.
Format hash file with two spaces delimiters.
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 99cc53f3f4 (package/libcamera: add v4l2 compatibility layer
option) incorrectly added the v4l2 option, which makes it so that
the previous options are overrdien.
Fix that by using an append-assignment.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Mutt before 1.14.3 allows an IMAP fcc/postpone man-in-the-middle attack
via a PREAUTH response.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
While host-python-pydal is needed at build time, the target variant of
this package is only needed at runtime.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Maintenance release, most important is OpenSSL 1.1+ support. See full
release notes for details:
https://fastd.readthedocs.io/en/stable/releases/v19.html
Two patches went upstream. The last remaining patch was not touched,
LTO might not work as expected, but upstream dropped CMake in favour
of the meson build system after v19, so it seemed not worth the
effort.
The hash of the license file is updated due to a copyright year
change.
Signed-off-by: Alexander Dahl <post@lespocky.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use upstream provided tarball. Drop autoreconf.
Update homepage URL. The old URL redirects to the new one.
Format hash file with two spaces delimiters.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tarball is now without a leading directory component. Don't strip
leading patch component.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
If systemd is selected, add the systemd package to the dependency list and set
the conf opt --enable-systemd-sockets.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version) and so autoreconf
- Update hash of README (update in year, version, miscellaneous
information)
- Update indentaton in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
granite fails to build since bump to vala 0.46.6 in commit
2723ff3333:
make[3]: Leaving directory '/tmp/instance-0/output-1/build/granite-0.4.1'
[ 1%] Generating style-classes.c;Application.c;Drawing/Color.c;Drawing/BufferSurface.c;Drawing/Utilities.c;GtkPatch/AboutDialog.c;Services/Settings.c;Services/Logger.c;Services/Paths.c;Services/System.c;Services/Contractor.c;Services/ContractorProxy.c;Services/IconFactory.c;Services/SimpleCommand.c;Widgets/AlertView.c;Widgets/Avatar.c;Widgets/Utils.c;Widgets/WrapLabel.c;Widgets/AboutDialog.c;Widgets/ModeButton.c;Widgets/DatePicker.c;Widgets/Entries.c;Widgets/TimePicker.c;Widgets/CollapsiblePaned.c;Widgets/StaticNotebook.c;Widgets/DynamicNotebook.c;Widgets/CompositedWindow.c;Widgets/AppMenu.c;Widgets/Welcome.c;Widgets/WelcomeButton.c;Widgets/Toast.c;Widgets/ToolButtonWithMenu.c;Widgets/PopOver.c;Widgets/ContractorView.c;Widgets/ContractorMenu.c;Widgets/DecoratedWindow.c;Widgets/LightWindow.c;Widgets/StatusBar.c;Widgets/SidebarPaned.c;Widgets/StorageBar.c;Widgets/SourceList.c;Widgets/CellRendererExpander.c;Widgets/CellRendererBadge.c;Widgets/ThinPaned.c;Widgets/OverlayBar.c;gr
anite.vapi;granite.h
make[3]: Entering directory '/tmp/instance-0/output-1/build/granite-0.4.1'
/tmp/instance-0/output-1/build/granite-0.4.1/lib/Application.vala:145.9-145.26: error: Creation method of abstract class cannot be public.
public Application () {
^^^^^^^^^^^^^^^^^^
So bump granite to latest version to include the following commit (that
does not apply cleanly on current version):
fd26013c84
Moreover:
- Switch site to github to get latest release
- Switch to meson-package
- Add gobject-introspection optional dependency
Fixes:
- http://autobuild.buildroot.org/results/3e2cc89b9bd42824731d0c7b39dd5b5c98e527ee
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Other changes:
- Update 0001-Remove-OWNER-and-GROUPS-parameters-to-install.patch to apply
properly with the udpated version.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Don't pass --disable-profiling, profiling is now disabled by default,
and in fact due to a bug in the configure.ac script, passing
--disable-profiling enables profiling.
Update LICENSE hash; copyright year update.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
By default, open-plc-utils installs all of the compiled binaries to
/usr/local/bin which is not in the default path provided by Buildroot.
Passing BIN="$(TARGET_DIR)/usr/bin" to make install forces open-plc-utils to
install the compiled binaries to /usr/bin.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
GCC10 set's the -fno-common flag by default which causes OpenJDK to fail when
compiling.
Because there is no easy way to create a patch from the OpenJDK mercurial
repository, this patch was created by hand from the three commits listed in
the provided patch itself.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a crucial bugfix release that fixes a backward incompatible ABI
change introduced in 1.3.2.
Also drop patches that are now applied upstream.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot currently installs openjdk-bin to $(HOST_DIR)/ instead of the more
traditional (for java installations) $(HOST_DIR)/usr/lib/jvm.
As described in https://bugs.busybox.net/show_bug.cgi?id=13001
"Openjdk-bin provides it's own libfreetype.so and places it into
$(HOST_DIR)/lib/. This library causes build failures with the
host-xapp_mkfontscale package due to the overwritten libfreetype.so.
mkfontscale.o: In function `doDirectory':
mkfontscale.c:(.text+0x1a80): undefined reference to `FT_Get_BDF_Property'
collect2: error: ld returned 1 exit status
Reproducing the error is done by repeating the following steps.
make host-freetype
make host-openjdk-bin
make host-xapp_mkfontscale"
There are two options for fixing this problem:
1) add host-freetype and host-lksctp-tools as dependencies to host-openjdk-bin
and then remove the provided libfreetype.so and libsctp.so libraries
in a post_extract_hook.
2) change the installation directory from $(HOST_DIR)/ to
$(HOST_DIR)/usr/lib/jvm just like the target OpenJDK package and
copy the entire source directories contents to the above location.
The second option provides the following advantages:
- the directory structure is consistent with how we handle the target OpenJDK.
- the HOST_OPENJDK_BIN_INSTALL_CMDS step is simplified.
- packages such as Maven require directories of which we are currently not
copying. These missing directories cause programs such as Maven to crash
when running with an error such as
"Can't read cryptographic policy directory: unlimited."
- does not miss any other libraries that solution 1 would not cope with
(e.g. libzip.so from host-libzip, or libnet.so from not-yet existing
host-libnet, or libsctp.so from not-yet existing host-lksctp-tools)
Because the second option is both simple, easier to implement, is low-impact,
and fixes the problems described above wholly, it is the best to implement.
To implement the above changes, we must also modify the following files in the
same patch to match the host's new directory paths:
- openjdk.mk
- openjdk-jni-test.mk
- openjdk-hello-world.mk
To avoid having to change all those packages in the future, expose two
new variables, HOST_OPENJDK_BIN_ROOT_DIR which contains the path where
the openjdk-bin was installed in, and JAVAC, which contains the path to
the javac compiler (modeled after the way the autoconf et al. variables
are set and exposed).
Tested with:
./support/testing/run-tests -o out -d dl tests.package.test_openjdk.TestOpenJdk
Fixes: https://bugs.busybox.net/show_bug.cgi?id=13001
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- introduce HOST_OPENJDK_BIN_ROOT_DIR and JAVAC
- expand and tweak the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Older versions of git store the absolute path of the submodules'
repository as stored in the super-project, e.g.:
$ cat some-submodule/.git
gitdir: /path/to/super-project/.git/modules/some-submodule
Obviously, this is not very reproducible.
More recent versions of git, however, store relative paths, which
de-facto makes it reproducible.
Fix older versions by replacing the absolute paths with relative ones.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
License was updated with little rephrasings, typo fixes,
and a note about using fmt as a third party library under the
MIT license.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The options --with-xslt-config and --with-xml2-config were
renamed to --xslt-config and --xml2-config", respectively.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* License was changed from UNIX to Windows line endings.
* SETUP_TYPE is actually distutils, and not setuptools.
* Use two spaces for hash file indentation.
Signed-off-by: Asaf Kahlon <asafka7@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All systemd binaries depend on libsystemd-shared and need their RPATH
fixed. Use a glob to catch them all.
We can't use $(wildcard ...) because this is expanded before any file
may exist (it's in the same rule that install those file, and the
expansion in Makefile is done once at the beginning of the recipe).
We need to test each file:
1. to ignore files that were not build (e.g. because the host is
missing some dependencies (in which case we don't care; we're only
interested in systemctl, and that one is already built)
2. to ensure the glob was expanded (in case no file would match
systemd-*)
Signed-off-by: Norbert Lange <nolange79@gmail.com>
[yann.morin.1998@free.fr:
- don't use 'set -e', use the more traditional '|| eixt 1'
- don't cd into HOST_DIR/bin, but use $(addprefix ...)
- use positive logic in the test
- expand commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
These files are necessary for C or C++ programs to use the native java
interface (JNI.)
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Fix CVE-2020-12740: tcprewrite in Tcpreplay through 4.3.2 has a
heap-based buffer over-read during a get_c operation. The issue is
being triggered in the function get_ipv6_next() at common/get.c.
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add basic /etc/iwd/main.conf configuration file to enable
network configuration (use built-in dhcp client).
For the non systemd-resolved case select the openresolv package
to fulfill the iwd resolvconf requirement (and adjust the
configuration file accordingly).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The machine has a NAND flash device and firmware capable of loading the
OS from a JFFS2 file system on it. Enable creation of JFFS2 image that
can be written to said flash device.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This makes the boot script set appropriate root parameters when it's
loaded from a NAND flash device.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The XO-1 laptop has a NAND flash and firmware capable of reading JFFS2
from it. Enable JFFS2 kernel support so that we'll be able to create
images capable of booting from the internal flash.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A couple of config symbols were mising that things we enable depend on.
Enable them.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is the keyboard connected via the SP "security processor" on a
XO-1.75. XO-1 has a regular PC keyboard.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
XO-1 has an internal MTD device.
Also, CONFIG_MTD_SPI_NOR was set twice for XO-1.75. One copy is removed,
one remains.
Signed-off-by: Lubomir Rintel <lkundrak@v3.sk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The eigen package was introduced as a generic package, but upstream was
in fact using CMake.
The motivation of this change is to fix package detection with CMake.
Eigen3 library normally installs a signature file named
"signature_of_eigen3_matrix_library" to help library detection:
https://gitlab.com/libeigen/eigen/-/blob/3.3.7/CMakeLists.txt#L423
The library also provide a CMake macro that use this file to
detect it:
https://gitlab.com/libeigen/eigen/-/blob/3.3.7/cmake/FindEigen3.cmake#L76
Without the signature file installed, packages searching for this
library with this method will fail. Other packages usings pkg-config are
not affected by this issue.
By using the cmake-package infrastructure, all the needed files
are now installed, fixing this CMake detection issue.
Other changes in this patch:
- Updated the Eigen git repository to the new url:
https://gitlab.com/libeigen/eigen
- Removed all build and install staging commands
(now included in upstream cmake)
- Package needs EIGEN_SUPPORTS_IN_SOURCE_BUILD = NO
- Removed the BR2_PACKAGE_EIGEN_UNSUPPORTED_MODULES option,
as this option is not proposed by the upstream CMake.
Unsupported module header files are now unconditionally installed. As
such, no need to introduce a legacy entry for
BR2_PACKAGE_EIGEN_UNSUPPORTED_MODULES: users that had it enabled will
still get the files installed, while those that did not will get them
installed now.
- Updated hash for source package, because the first component in the
stored paths changed from eigen-eigen-323c052e1731/ to eigen-3.3.7/
and some mercurial related files (.hg_archival.txt, .hgtags) got
dropped after the conversion to git.
- Reformat hash file with two spaces delimiters
- Define EIGEN_CONF_OPTS to set pkg-config .pc install path
Signed-off-by: Julien Olivain <juju@cotds.org>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Currently, GNU Make expands the Python SYSCONFIGDATA_NAME variable;
however, when building with per-package directories, this variable is
not set because the evaluation of this variable occurs before buildroot
creates the per-package directories of a given package.
This can be easily demonstrated with that trivial Makefile:
$ cat Makefile
BLA = $(wildcard bla)
all:
@echo 'BLA=$(BLA)'
@touch bla
@echo 'BLA=$(BLA)'
$ make
BLA=
BLA=
$ make
BLA=bla
BLA=bla
I.e. the variables are evaluated at the beginning of a recipe, not for
each line of the recipe.
There are two solutions to fix this problem:
- add a step between "patch" and "configure," which would evaluate all
of the variables after creating the per-package directories;
- evaluate SYSCONFIGDATA_NAME via a shell expansion instead of
Makefile, to postpone the effective ex[ansion to until after the
file has been created.
Even though the first option is semantically the best solution, this is
also very intrusive, especially since python3 is so far the only case
where we would need it. The second option however is more expedient, adn
so this is what we're doing here.
We introduce PKG_PYTHON_SYSCONFIGDATA_PATH to avoid duplication and to
make the following line easier to read.
Then PKG_PYTHON_SYSCONFIGDATA_NAME is actually defined as a back-tick
shell expansion (although back-ticks have their drawbacks, using $(...)
in Makefile is not trivial either):
- we test that the file does exist, to cover the python2 and python3
cases: with python2, the file does not exist, so we want to expand
to an empty string; 'basename' only works on the filename, and does
not check the file actually exists;
- if the file exist, we get its basename without the .py extension,
and this makes our expansion;
- the "|| true" is added to ensure the old behavior of returning an
empty string if the file does not exist still works, when the
expansion is attempted in a shell where 'set -e' is in effect (the
test would fail with python2, but this is not an error).
Fixes: https://bugs.busybox.net/show_bug.cgi?id=12941
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: slight rewording in commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The necessary system users are documented in the projects README.
Description is matched to the ones in the upstream sysusers.d
files. Remove homedirectory (upstream doesnt care either).
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since V235 the "gateway" and "upload" services use DynamicUsers,
requiring no entries in /etc/passwd.
This functionality requires nss-systemd, which is always
enabled in buildroot.
The "bus-proxy" user was removed in V230.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The error is misleading: it reports that no name was provided,
when in fact the external.desc file is missing.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>p
Reviewed-by: Romain Naour <romain.naour@gmail.com>
When a br2-external tree has an issue, e.g. a missing file, or does not
have a name, or the name uses invalid chars, we report that condition by
setting the variable BR2_EXTERNAL_ERROR.
That variable is defined in the script support/scripts/br2-external,
which outputs it on stdout, and checked by the Makefile.
Before d027cd75d0, stdout was explicitly redirected to the generated
.mk file, with exec >"${ofile}" as the Makefile and Kconfig
fragments were generated each with their own call to the script, and
the validation phase would emit the BR2_EXTERNAL_ERROR variable in the
Makefile fragment.
But with d027cd75d0, both the Makefile and Kconfig fragments were now
generated with a single call to the script, and as such the semantics of
the scripts changed, and only each of the actual generators, do_mk and
do_kconfig, had their out put redirected. Which left do_validate with
the default stdout. Which would emit BR2_EXTERNAL_ERROR on stdout.
In turn, the stdout of the script would be interpreted by as part of the
Makefile. But this does not end up very well when a br2-external tree
indeed has an error:
- missing a external.desc file:
Makefile:184: *** multiple target patterns. Stop.
- empty external.desc file:
Config.in:22: can't open file "output/.br2-external.in.paths"
So we must redirect the output of the validation step to the
Makefile fragment, so that the error message is correctly caught by the
top-level Makefile.
Note that we don't need to append in do_mk, and we can do an overwrite
redirection: if we go so far as to call do_mk, it means there was no
error, and thus the fragment is empty.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Tested-by: Romain Naour <romain.naour@gmail.com>
- Fix CVE-2020-12049: An issue was discovered in dbus >= 1.3.0 before
1.12.18. The DBusServer in libdbus, as used in dbus-daemon, leaks file
descriptors when a message exceeds the per-message file descriptor
limit. A local attacker with access to the D-Bus system bus or another
system service's private AF_UNIX socket could use this to make the
system service reach its file descriptor limit, denying service to
subsequent D-Bus clients.
- Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
A gcc compiler, which was configured with
--with-gcc-major-version-only, will only return a single
number. (debian does this for example).
A simple modification allows the check to work with both
single numbers (eg. '9') and full versions (eg. '9.2.1').
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
First patch is not needed since version 1.67.0 and
90dd8146fb
Indeed, since this bump, the patch is wrongly patching
virtual string_type format(double value,size_t &code_points) const
instead of:
virtual string_type format(int64_t value,size_t &code_points) const
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
ChangeLog:
- SCardEndTransaction(): greatly improve performances (x300)
- tokenparser: accept any Unicode character in a reader name
- Use /run instead of /var/run by default
- Fix a memory leak from a polkit call
- Some other minor improvements
Also update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
EarlyOOM daemon for triggering Linux OOM killer before running out of
memory, avoiding situations where the machine becomes unresponsive from
out of control swapping.
Some desktop distributions are installing and enabling this daemon by
default to prevent unresponsive machines in OOM scenarios.
https://fedoraproject.org/wiki/Changes/EnableEarlyoom
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since cf75d7da98 we have a build failures when
building libgbm.so when valgrind package is selected because --static is always
passed to pkg-config even for shared build.
Even if -Dvalgrind=false on meson command line to build mesa, the valgrind
libraries come from pkg-config libdrm...
output/host/bin/pkg-config libdrm --libs --static
-L[...]/sysroot/usr/lib -ldrm -lm -L[...]/sysroot/usr/lib/valgrind
-lcoregrind-arm64-linux -lvex-arm64-linux -lgcc
... and break the build.
See initial discussions:
http://lists.busybox.net/pipermail/buildroot/2020-June/284543.html
This is due to a wrong condition test added by the patch
0004-mesonbuild-dependencies-base.py-add-pkg_config_stati.patch.
Indeed, pkg_config_static is a string, not a boolean; it is set to
either 'true' or 'aflse' by our meson package infra. Since the returned
object is a string, do not pass a boolean, but pas None (we only want to
test against the 'true' string, so we don't care what we get back when
it is not set, which never happens in Buildroot).
Before this patch, the issue can be reproduced using the following defconfig:
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_VALGRIND=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
Fixes:
http://autobuild.buildroot.net/results/1b5/1b58d73ecbbe1af2c3e140563d696cf32d1c4a5a/build-end.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: slightly reword the commit log]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes (on startup):
$ usr/libexec/iwd
Wireless daemon version 1.7
Failed to initialize D-Bus
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- move MMU dependency first
- split long line in comment dependencies
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libwebsockets allows the usage of unix-domain-sockets since 2016, so
explicitly enable it (size increase is a ridiculous 12 bytes on ARM).
Signed-off-by: Martin Elshuber <martin.elshuber@theobroma-systems.com>
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
[yann.morin.1998@free.fr: always enable, don't add a menuconfig entry]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Meson build system enable by default -Wl,--as-needed [1][2] in the linker command line
and due to this the libmesa_dri_drivers.so build fail with the Codesourcery ARM and
Aarch64 2014.05 toolchain:
/home/buildroot/autobuild/run/instance-1/output-1/host/bin/arm-none-linux-gnueabi-g++
-o src/mesa/drivers/dri/libmesa_dri_drivers.so
-Wl,--as-needed -Wl,--no-undefined -Wl,-O1 -shared -fPIC -Wl,--start-group
-Wl,-soname,libmesa_dri_drivers.so -Wl,--whole-archive
src/mesa/drivers/dri/radeon/libr100.a src/mesa/drivers/dri/nouveau/libnouveau_vieux.a
-Wl,--no-whole-archive
src/mesa/drivers/dri/common/libmegadriver_stub.a
src/mesa/drivers/dri/common/libdricommon.a
src/mapi/shared-glapi/libglapi.so.0.0.0
src/mesa/libmesa_classic.a src/mesa/libmesa_common.a
src/compiler/glsl/libglsl.a src/compiler/glsl/glcpp/libglcpp.a
src/util/libmesa_util.a src/util/format/libmesa_format.a
src/compiler/nir/libnir.a src/compiler/libcompiler.a
src/util/libxmlconfig.a
[...]
src/mesa/drivers/dri/common/libmegadriver_stub.a(megadriver_stub.c.o): In function `megadriver_stub_init':
megadriver_stub.c:(.text.startup+0x20): undefined reference to `dladdr'
megadriver_stub.c:(.text.startup+0xbc): undefined reference to `dlsym'
collect2: error: ld returned 1 exit status
This problem seems to be specific to this toolchain release (ARM and aarch64)
CodeSourcery 2014.05: gcc 4.8.3-prerelease; binutils 2.24.51.20140217; glibc 2.18
The following prebuilt toolchain has been tested and doesn't trigger this issue:
Linaro 4.9-4.9-2014.11: gcc 4.9.3; binutils 2.24.0; glibc 2.19
CodeSourcery 2014.11: gcc 4.9.1; binutils 2.24.51.20140217; glibc 2.20
Older toolchains doesn't have a recent enough glibc or linux-headers version
to breaking the build with mesa3d 20.1.0 or libdrm 2.4.102.
In order to build mesa3d with the CodeSourcery 2014.05 using --as-needed would be
reorder the static librairies:
diff --git a/src/mesa/drivers/dri/meson.build b/src/mesa/drivers/dri/meson.build
index b09ca16e38a..9ac6731c522 100644
--- a/src/mesa/drivers/dri/meson.build
+++ b/src/mesa/drivers/dri/meson.build
@@ -59,7 +59,7 @@ if _dri_drivers != []
[],
link_whole : _dri_drivers,
link_with : [
- libmegadriver_stub, libdricommon, libglapi,
+ libdricommon, libmegadriver_stub, libglapi,
libmesa_classic,
],
Instead, we can disable --as-needed from the meson build system using
"-Db_asneeded=false" only for this toolchain.
[1] https://mesonbuild.com/Builtin-options.html
[2] https://wiki.gentoo.org/wiki/Project:Quality_Assurance/As-needed
Fixes:
http://autobuild.buildroot.net/results/eec39a4fbfbfaa58980fab36f2fd902a16eecf0f/build-end.log
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
libhtpserver uses the following constructor since version 0.18.0 and
9cdc90177e:
http_request(http_request&& b) noexcept = default;
This raises the following build failure on gcc 4.8:
In file included from http_request.cpp:22:0:
httpserver/http_request.hpp:234:9: error: function 'httpserver::http_request::http_request(httpserver::http_request&&)' defaulted on its first declaration with an exception-specification that differs from the implicit declaration 'httpserver::http_request::http_request(httpserver::http_request&&)'
http_request(http_request&& b) noexcept = default;
^
This build failure is due to the following gcc bug:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=59526
Instead of adding BR2_TOOLCHAIN_HAS_GCC_BUG_59526, simply add a
dependency on gcc >= 5
Fixes:
- http://autobuild.buildroot.org/results/18a29056e0191d9f23e1f9c6f72b13c07d03b300/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Change the upstream URL as the project is now under Eclipse umbrella.
Remove obsolete options like IPK nad RPM and disable JSONPLAT option
that is enabled by default but requires c-json package.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps python-pydal to version v20200531.1.
It updates alse the LICENSE hash cause the file was cleaned and revised by the
author, the license remains the same.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Install header files and libraries into the staging area. Some
packages like mraa (if enabled for Node.js) search for node.h
and v8.h. Hence, Node.js development file must be installed to
the staging area.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop fourth and sixth patches (already in version)
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package bumps python-pillow to version 7.1.2.
It updates also the LICENSE hash cause of a copyright year update.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
User can drop in more systemd units or presets
in an rootfs overlay, which will be copied over *after*
the TARGET_FINALIZE_HOOKS are run.
Instead, run preset-all afterwards from ROOTFS_PRE_CMD_HOOKS
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Jérémy ROSEN <jeremy.rosen@smile.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fixes the following security issues:
- CVE-2020-13401: Disable IPv6 Router Advertisements to prevent address
spoofing
An attacker in a container, with the CAP_NET_RAW capability, can craft
IPv6 router advertisements, and consequently spoof external IPv6 hosts,
obtain sensitive information, or cause a denial of service.
In addition, 19.03.9..11 fixes a number of issues. For details, see:
https://docs.docker.com/engine/release-notes/
Signed-off-by: Christian Stewart <christian@paral.in>
[Peter: mention security impact, extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.13.9 (released 2020/03/19) includes fixes to the go command, tools, the
runtime, the toolchain, and the crypto/cypher package.
go1.13.10 (released 2020/04/08) includes fixes to the go command, the runtime,
and the os/exec and time packages.
go1.13.11 (released 2020/05/14) includes fixes to the compiler.
go1.13.12 (released 2020/06/01) includes fixes to the runtime, and the go/types
and math/big packages.
Release notes: https://golang.org/doc/go1.13
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a4eef9a395 (linux: introduce BR2_KERNEL_DTB_KEEP_DIRNAME)
introduced a new config option, but its name was not matching the
naming-scheme of the other config options.
Rename it.
We don't need legacy handling, because that config option was added very
recently and was never part of a release.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Bumped xr819-xradio package to the latest version to fix some compilation issues when using kernel 5.6 for the orangepi-zero
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit fcd9c85475, gr-qtgui has
been removed because this Qt GUI was based on Qt4 which was no longer
supported by Buildroot.
However, gnuradio 3.8 brings a Qt5-based GUI, and therefore the option
BR2_PACKAGE_GNURADIO_QTGUI can be re-introduced.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The D-Bus installation process installs dbus-daemon-launch-helper as
follows:
chown root:$(DBUS_USER) $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
chmod 4750 $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper$(EXEEXT); \
And when the installation does not take place as root (like is the
case in the context of Buildroot), it prints:
echo "Not installing $(DESTDIR)$(libexecdir)/dbus-daemon-launch-helper binary setuid!"; \
echo "You'll need to manually set permissions to root:$(DBUS_USER) and permissions 4750"; \
So let's adjust the installation logic of dbus-daemon-launch-helper to
match these requirements.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 54ea03ccd7 ("package/syslog-ng:
implement systemd enablement using DefaultInstance") replaced the lines
installing the syslog-ng@default file with printf lines creating a file
in a syslog-ng@.service.d/ directory on-the-fly. Since then, nothing
uses the syslog-ng@default file, so let's delete it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
The configure script will automatically detect used pkg-config if
libcap or libselinux are available.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Pass -std=c++11 to fix the following build failure with gcc <= 5:
/tmp/instance-0/output-1/host/bin/mips64el-linux-g++ -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -Wextra -Wno-missing-field-initializers -Wno-unused-parameter -g -DSHA="not available" -o edid-decode edid-decode.cpp parse-base-block.cpp parse-cta-block.cpp parse-displayid-block.cpp parse-ls-ext-block.cpp parse-di-ext-block.cpp parse-vtb-ext-block.cpp -lm
edid-decode.cpp: In member function 'std::__cxx11::string edid_state::dtd_type()':
edid-decode.cpp:192:17: error: 'to_string' is not a member of 'std'
unsigned len = std::to_string(preparse_total_dtds).length();
^
Also add a dependency on gcc 4.7
Fixes:
- http://autobuild.buildroot.org/results/71e4a50542c4551797f1d0404d27244612b427d7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will fix the following build failure when enabling introspection on
libgtk2:
Couldn't find include 'Pango-1.0.gir' (search path: '['/home/fabrice/buildroot/output/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/home/fabrice/buildroot/output/host/share', '/usr/share/gnome/gir-1.0', '/usr/local/share/gir-1.0', '/usr/share/gir-1.0', '/home/fabrice/buildroot/output/host/share/gir-1.0', '/usr/share/gir-1.0']')
Fixes:
- http://autobuild.buildroot.org/results//86c6f55e0bd1a0fe3b70c9e97193aaad94d72a7f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This will fix the following build failure when enabling introspection on
libgtk2:
Couldn't find include 'GdkPixbuf-2.0.gir' (search path: '['/tmp/instance-0/output-1/host/bin/../mipsel-buildroot-linux-gnu/sysroot/usr/bin/../share/gir-1.0', '../gdk', '/tmp/instance-0/output-1/host/share', 'gir-1.0', '/tmp/instance-0/output-1/host/share/gir-1.0', '/usr/share/gir-1.0']')
Fixes:
- http://autobuild.buildroot.org/results//86c6f55e0bd1a0fe3b70c9e97193aaad94d72a7f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github to get latest release
- Fix CVE-2019-20805: p_lx_elf.cpp in UPX before 3.96 has an integer
overflow during unpacking via crafted values in a PT_DYNAMIC segment.
- Fix CERT-FI Case 829767 UPX command line tools segfaults.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: two spaces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
It is often necessary to refer to other images that are present in
BINARIES_DIR from a custom ubinize configuration e.g. to include the
kernel in a UBI volume.
As we do for BR2_ROOTFS_UBIFS_PATH, replace BINARIES_DIR when copying
the file.
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
[yann.morin.1998@free.fr:
- add the blurb in the help text
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Use the unit type=notify (Redis contacts systemd when ready)
- Start redis with the supervised option, so it knows it should
talk to systemd
- USE_SYSTEMD is not documented, but it is used in the src/Makefile
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr: add and explain USE_SYSTEMD]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
TLS support is only enabled when BUILD_TLS is set to 'yes'. Anoy other
value, as well as empty or not set, will disable TLS. However, for
consistency with the rest of the code (e.g. for autotools packages where
we use both the --enable and --disable flags), we explcitly pass
BUILD_TLS=no. This also avoids an environment variable to leak into the
build.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr: add and explain the =no case]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
- Update dependencies in Config.in because of new requirements
- Update the help text in Config.in to a more recent wording
- Update the hash file to the new 2 spaces convention
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
[yann.morin.1998@free.fr:
- rewrap help text
- wrap long depends line in comment
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
In linux, newer architectures like ARM64 and RISC-V keep their device
tree sources organized by subdirectories. When these device trees are
installed by the kernel they will keep the directory names. But
buildroot strips the prefixes when installing them into /boot or the
images directory.
Sometimes the bootloader references the device tree by name (e.g.
u-boot has the environment variable 'fdtfile') which also includes
the prefix directory.
Make it possible to keep this prefix during installation, so we can
be compatible with other distributions and make it easier for the
user, because he doesn't have to change that environment variable.
Signed-off-by: Michael Walle <michael@walle.cc>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
On master, commit 544007dcc4 itroduced patches to fix CVE-2020-11888.
On next, commit 604fe08806 itroduced the exact same patches for the
exact same reason.
But on next, commit 81b3fd8654 bumped the version and dropped the
patches.
When next was merged into master in commit a6569f2b3d, the patches
introduced by 544007dcc4 (on master) were retained.
Fixes:
- http://autobuild.buildroot.org/results/bf305c78dddd035b97e88943a1d19a8ceb6b41f7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: rewrite commit log with detailed explanations]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LICENSE diff:
- This software is copyright (c) 1994-2017 by Gisle Aas.
+ This software is copyright (c) 1994 by Gisle Aas.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
LICENSE diff:
- This software is copyright (c) 2018 by Toby Inkster.
+ This software is copyright (c) 2020 by Toby Inkster.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Backport a patch from upstream to fix the build on certain versions of
gsc, notably:
Ubuntu 19.10 with gcc (Ubuntu 8.3.0-26ubuntu1~19.10) 8.3.0
Ubuntu 19.10 with gcc (Ubuntu 9.2.1-9ubuntu2) 9.2.1 20191008
The upstream patch is simply a change in the gentpl.py script, which is
used to generate parts of the automake machinery, so if we just backport
the upstream patch, we need to call the script to regenerate those files.
However, the modified script is a python script, so we would need to add
a dependency on host-python (2 or 3), which is not so nice.
Furthermore, calling the script is not enough: it needs a specific set
of optionss for each file it is to generate. That set of options is not
static; it is constructed in the convoluted autogen.sh. Calling
autogen.sh is usally not so good an idea in the Buildroot context, and
indeed this fails becasue it calls to autoreconf, but without our
carefuly crafted options and environment variables.
There was a little light in the tunnel, in that autogen.sh can be told
not to run autoreconf, by setting the environemnt variable
FROM_BOOTSTRAP to an non-=empty string, but this is fraught with various
other side-effects, as in that cause, autogen.sh expects to be valled by
an upper sciopt, bootstrap, which is not provided in the tarball
distribution...
So, between all those issues, autogen, bootstrap, and a host-python (2
or 3) dependency, we choose another route: path the script *and* the one
generated file affected by the change. Since that patched file is a .am
file, we also patch the corresponding .in file
However, we're faced with another issue: the other generated file is
now older than the script, so the automake machinery will now want to
re-run autoconf et al during the build step, which is still not a good
idea for us. So we touch the other generated file so it is mopre recent
than the script.
This is still not sufficient, because the patched file also has a
dependency on the generated file, so we need to touch as well.
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=12946
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- keep the hunk about patching gentpl.py
- make it a git-formatted patch
- add the touch
- drastically expand the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This reverts commit fa84c176c2 that
replace luabitop by lua_bit32 package when lua 5.1 is used.
Since this change the prosody test in gitlab is fail due to
missing lua-bitops [1]:
Starting prosody:
**************************
Prosody was unable to find lua-bitops
This package can be obtained in the following ways:
Source: http://bitop.luajit.org/
Debian/Ubuntu: sudo apt-get install lua-bitop
luarocks: luarocks install luabitop
WebSocket support will not be available
More help can be found on our website, at https://prosody.im/doc/depends
**************************
The upstream documentation [2] is misleading (or not uptodate)
about lua-bit32 dependency.
Since bitop is builtin since lua5.2, we probably need to select
luabitop package only when lua 5.1 is used as lua interpreter.
Tested with run-tests:
./support/testing/run-tests tests.package.test_prosody.TestProsodyLua51
[1] https://gitlab.com/buildroot.org/buildroot/-/jobs/576271975
[2] https://prosody.im/doc/depends#bitop
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since v2.1.2:
https://github.com/FluidSynth/fluidsynth/releases/tag/v2.1.3
- fix a cross-compilation failure from Win32 to WinARM
- fix issues while fluid_player is seeking
- fix a NULL pointer dereference if synth.dynamic-sample-loading is enabled
- fix a NULL pointer dereference in delete_rvoice_mixer_threads()
- fix a NULL pointer dereference in the soundfont loader
- fix dsound driver playing garbage when terminating fluidsynth
- avoid memory leaks when using libinstpatch
./utils/test-pkg --package fluidsynth
6 builds, 1 skipped, 0 build failed, 0 legal-info failed
Signed-off-by: Julien Olivain <juju@cotds.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* libqmi-glib:
** Fix build with GLib < 2.44.
** Fix UTF-8 string validation when the string contains a trailing NUL byte
(e.g. the Sierra specific "DMS Swi Get Current Firmware" command).
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- edid-decode changed from C to C++, adjust make command
accordingly and add BR2_INSTALL_LIBSTDCPP dependency
- now shipping a LICENSE file, change from (gone) edid-decode.c to this one
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
[CVE-2020-10543] Buffer overflow caused by a crafted regular
expression
[CVE-2020-10878] Integer overflow via malformed bytecode produced by a
crafted regular expression
[CVE-2020-12723] Buffer overflow caused by a crafted regular
expression
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop patch #1. libnuma is now a mandatory dependency. The ostype and
machinetype variables are not used for the Linux target.
Drop patch #3. SH is not a supported target architecture anymore.
Add mandatory dependency on libnuma (numactl). Propagate numactl
architecture dependency.
Update homepage link. The kernel wiki is dead.
Drop Python build time dependency. Python is an optional run-time
dependency.
Add reference to upstream provided tarball hash.
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- CVE-2020-13254: Potential data leakage via malformed memcached keys
In cases where a memcached backend does not perform key validation,
passing malformed cache keys could result in a key collision, and
potential data leakage. In order to avoid this vulnerability, key
validation is added to the memcached cache backends.
- CVE-2020-13596: Possible XSS via admin ForeignKeyRawIdWidget
Query parameters for the admin ForeignKeyRawIdWidget were not properly URL
encoded, posing an XSS attack vector. ForeignKeyRawIdWidget now ensures
query parameters are correctly URL encoded.
For details, see the announcement:
https://docs.djangoproject.com/en/dev/releases/3.0.7/
Additionally, 3.0.5..3.0.7 contains a number of non-security related
bugfixes.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use CROSS_COMPILE for toolchain prefix. Makefile derives CC, AR, and
RANLIB from that.
Remove sed manipulation of the lib/configure script. Host uname is not
used when the HOST variable is set as we do.
Remove sed manipulation of Makefile. Set STRIP to an empty string
instead.
Format hash file with two space separators.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The HTTPS URL seems to be more reliable and quicker for download than
FTP. FTP may also be a blocked protocol on some sites and in CI/CD
setups.
Signed-off-by: Joachim Nilsson <troglobit@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Changes since 1.63:
- 1.64 2020-04-11 Fixed error in definitions of BCM2835_AUX_SPI_STAT_TX_LVL
and BCM2835_AUX_SPI_STAT_RX_LVL
- 1.65, 1.66 2020-04-16 Added support for use of capability cap_sys_rawio
to determine if access to /dev/mem is available for non-root users
That latter part (using capabilities) is not supported, because it is
broken upstream (the code is messed up using two similar #defines to
test and enable it; messy...) Since it previously required root access
to work, and still does now, this is not a regression, so do not add
support for capablities.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr: explain why we don't support capabilities]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This is a security release.
Vulnerabilities fixed:
CVE-2020-8172: TLS session reuse can lead to host certificate verification bypass (High).
CVE-2020-11080: HTTP/2 Large Settings Frame DoS (Low).
CVE-2020-8174: napi_get_value_string_*() allows various kinds of memory corruption (High).
See https://nodejs.org/en/blog/release/v12.18.0/
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Fix CVE-2020-11080 Denial of service: Overly large SETTINGS frames
Signed-off-by: Martin Bark <martin@barkynet.com>
[yann.morin.1998@free.fr: two spaces in hash files]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Although those patches were properly dropped when the origianl bump was
applied to the next branch (commit 4675c7d441), both net and master also
had a commit that moved the patches around when the csku fork was
removed (commit 58af9a70cc and 20f45029cc, respectively).
This seemed to have caused some confusion with git-merge, though, and
the y re-appeared after the merge.
Remove them again for good, this time.
Fixes: http://autobuild.buildroot.net/results/0adfb031c243709b0bac71599ed419b64cc514a4
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr:
- rewrite commit log to explain why the patches reappeared
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: two sapces in hash file]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Since commit "cmake: add cmake build support"
(952e1e906avsergeev/c-periphery@d0a973c),
c-periphery implement cmake build, so use cmake-package instead of
generic-package. Due to this, it now builds a shared library, so we
drop the INSTALL_TARGET = NO.
The hash of the license file is updated due to an update in the
copyright year:
- Copyright (c) 2014-2019 vsergeev / Ivan (Vanya) A. Sergeev
+ Copyright (c) 2014-2020 vsergeev / Ivan (Vanya) A. Sergeev
Signed-off-by: Joris Offouga <offougajoris@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump kernel to version 5.6 and uboot to version 2020.04 for
orangepi-zero configuration
Signed-off-by: Gonçalo Salazar <glbsalazar@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few conflicts had to be resolved:
- Version number and hash for mesa3d-headers/mesa3d
- Patches added in qemu, and the qemu version number
- The gnuconfig README.buildroot
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
perf by itself is not a standalone package; instead, it is part of a
bigger package, linux-tools.
Even though perf is the only one to need kernel .config fixups, we still
do it in a generic way, as it blends nicely in the existing variables,
which all use a loop over all the tools.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
For some SoCs (i.e.: i.MX8M Nano for now), the DDR training firmware
in the boot image depends on the type of memory installed on a board
(LPDDR4, DDR4, etc...). The previous patch makes this firmware name
agnostic of the DDR type and uses ddr_fw.bin as a generic name. This
patch makes imx8-bootloader-prepare.sh use this generic name,
independently of the kind board DDR type.
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Several i.MX8 (e.g.: 8M, 8MM, 8MN) support many DDR types (LPDDR4, DDR4,
etc.), for which the DDR training is performed in the bootloader.
Some boards have LPDDR4 (e.g.: nitrogen8mn) and some others have the DDR4
(e.g.: NXP's reference board EVK). This patch allows the selection of either
of the binaries used to train the DDR.
Note that DDR and HDMI FW copies are now separated, which makes latter
being properly copied only for the relevant SoC (i.MX8MQ).
Suggested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Maeva Manuel <maeva.manuel@oss.nxp.com>
Reviewed-by: Julien Olivain <julien.olivain@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Only some i.MX8 needs a DDR training firmware (8M, 8MM, 8MN). Some other
i.MX8 (QuadMax, QuadXPlus) rely on system controller for that task.
Suggested-by: Julien Olivain <julien.olivain@oss.nxp.com>
Signed-off-by: Stephane Viau <stephane.viau@oss.nxp.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
[yann.morin.1998@free.fr:
- use the new variable to drive the firmware installation
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
This commit bumps ARC toolchain to arc-2020.03-release.
ARC GNU tools of version arc-2020.03-release bring some quite significant
changes like:
* Binutils 2.34 with additional ARC patches
* GCC 9.3 with additional ARC patches
* glibc 2.30 with additional ARC patches
* GDB 10-prerelease with additional ARC patches
Signed-off-by: Evgeniy Didin <Evgeniy.Didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This includes the following changes:
5732f86 1.1.1
d8e9b32 pep8
4795bc7 Add Jackson Matheson to contributors
26db934 Merge branch 'master' of https://github.com/ljean/modbus-tk
837a12b Merge pull request #125 from jacksonmatheson/master
07b06f8 Fixed READ_WRITE_MULTIPLE_REGISTERS, added write_starting_address_FC23
Also update hash file formatting (2 spaces).
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit:
- bump Linux & U-Boot to linux4sam-2020.04
- bump at91bootstrap to v3.9.2
Signed-off-by: Pierre-Jean Texier <pjtexier@koncepto.io>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Move the unconditional CONF_OPTS assignment toward the beginning of
the file, before the conditionals on optional dependencies. And use =
for this unconditional assignment instead of +=. No functional
changes, just to align with the coding style used in most other
packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gloox is a rock-solid, full-featured Jabber/XMPP client library,
written in clean ANSI C++. It makes writing spec-compliant clients
easy and allows for hassle-free integration of Jabber/XMPP
functionality into existing applications. gloox is released under the
GNU GPLv3. Commercial licensing and support are available.
Signed-off-by: Yair Ben Avraham <yairba@protonmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We generally use on "depends on" for each toolchain option, so let's
do this as well in package/xerces/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update to add the option to compile xerces with network
enabled by default so it can be unselected to compile
without network support.
When network support is enabled the Network Accessor feature
will decode schema urls and if they don't appear as localhost
or local files, it will open a stream (socket) session with
the remote server. In an embedded setting having the option to
disable this allows:
* cleaner audit logging
* smaller security attack surface
* less library dependencies
* no behind the scenes failed session attempts
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
python-markdown2 through 2.3.8 allows XSS because element names are
mishandled unless a \w+ match succeeds. For example, an attack might use
elementname@ or elementname- with an onclick attribute.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also update list of tests incompatible with musl.
Removed patch backported from this release.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove double space in AT_SPI2_ATK_SITE
- Add link to upstream sha256 file
- License is LPGL-2.1+ since
468b527d8a
- Switch to meson-package
- Add a patch to disable tests to avoid adding libxml2 dependency
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Drop patch (already in version)
- Add upstream link on sha256
- License is LGPL-2.1+ since
1256988c43
- Update indentation of hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rebase/update disable tests patch.
Replace autotools build system with meson as autotools is deprecated
and will be removed.
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The openssh package comprises three separate entities: the SSH client, SSH
server, and some SSH key utilities. One may want the client but not the
server, the server but not the client, or maybe only the key utilities.
Add separate options for each entity and update the files installed on
target accordingly.
On an ARM Cortex-A53 configuration, size of stripped binaries are:
Client programs: 2213118 bytes (2161 KB)
usr/bin/ssh,657180
usr/bin/scp,99836
usr/bin/ssh-add,312800
usr/bin/ssh-agent,296428
usr/libexec/ssh-keysign,398908
usr/libexec/ssh-pkcs11-helper,292316
usr/bin/sftp,144992
usr/bin/ssh-copy-id,10658
Server programs: 806840 bytes (787 KB)
usr/libexec/sftp-server,112140
usr/sbin/sshd,694168
etc/init.d/S50sshd,532
Key utilities: 789648 bytes (771 KB)
usr/bin/ssh-keygen,398924
usr/bin/ssh-keyscan,390724
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When NetworkManager is built with ModemManager support, it should only
require the generic ModemManager dependency; it shouldn't configure
which features ModemManager provides.
Signed-off-by: Aleksander Morgado <aleksander@aleksander.es>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
