Update for 2015.02-rc2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

CHANGES

@@ -1,3 +1,817 @@
+2015.02-rc2, Released February 15th, 2015
+
+	Minor fixes.
+
+	raspberrypi: fix kernel sha1 for DT variant.
+
+	Updated/fixed packages: dbus, dvdauthor, git, libsemanage,
+	libsepol, libssh2, mplayer, ntp, openvmtools, python3,
+	qt5base, qt5connectivity, xserver_xorg-server
+
+2015.02-rc1, Released February 8th, 2015
+
+	Fixes all over the tree and new features.
+
+	Static/shared library handling reworked. This is now a
+	tristate (shared only / shared and static / static
+	only). Default is now shared only to speed up the
+	build. BR2_PREFER_STATIC_LIB is now called BR2_STATIC_LIBS.
+
+	The toolchain (internal and external) will now warn when an
+	unsafe library or header path is used (such as /usr/include or
+	/usr/lib). If BR2_COMPILER_PARANOID_UNSAFE_PATH is enabled
+	under build options this instead becomes an error.
+
+	A installation path issue with the internal musl toolchain
+	support has been fixed so it is now possible to reuse it as an
+	external toolchain.
+
+	Architectures: Freescale E5500 and E6500 PowerPC support
+	added, deprecated MIPS 1/2/3/4 support removed.
+
+	New defconfigs: Freescale p2020ds, MIPS creator CI20,
+	Raspberrypi with DT, UDOO Quad.
+
+	'make <foo>_defconfig' now saves the path to the defconfig in
+	the .config, so a 'make savedefconfig' automatically updates
+	it.
+
+	Infrastructure for packages using the Erland rebar tool has
+	been added.
+
+	Hashes for a large number of packages have been added. Hashes
+	are now checked for both target and host packages.
+
+	The system menu now has an option to automatically configure a
+	network interface through DHCP at bootup.
+
+	The default filesystem skeleton now uses a separate tmpfs for
+	/run instead of a symlink to /tmp/ for security reasons / to
+	protect against conflicts with user generated temporary files.
+
+	BR2_EXTERNAL is now exported to post-build and post-image
+	scripts.
+
+	New packages: bdwgc, benejson, blktrace, bootstrap, cgic,
+	ding-libs, dvdauthor, ejabberd, erlang-goldrush, erlang-lager,
+	erlang-p1-cache-tab, erlang-p1-iconv, erlang-p1-sip,
+	erlang-p1-stringprep, erlang-p1-stun, erlang-p1-tls,
+	erlang-p1-utils, erlang-p1-xml, erlang-p1-yaml,
+	erlang-p1-zlib, exiv2, freeradius-client, gengetopt, glmark2,
+	gpu-amd-bin-mx51, guile, host-qemu, ifupdown, iperf3,
+	janus-gateway, kodi, kodi-audioencoder-flac,
+	kodi-audioencoder-lame, kodi-audioencoder-vorbis,
+	kodi-audioencoder-wav, libcli, libiio, liblinear, libnice,
+	libselinux, libsemanage, libserialport, libsigro,
+	libsigrokdecode, libsrtp, liburiparser, libvips, libwebsock,
+	libz160, libzip, lightning, mcelog, memtest86, mjpegtools,
+	mjpg-streamer, mke2img, mpd-mpc, netsurf-buildsystem, odhcp6c,
+	openldap, python-alsaaudio, python-certifi, python-cheetah,
+	python-coherence, python-django, python-docopt, python-enum,
+	python-enum34, python-flask, python-gobject, python-httplib2,
+	python-ipaddr, python-itsdangerous, python-jinja,
+	python-markdown, python-markupsafe, python-networkmanager,
+	python-pam, python-psutil, python-pyftpdlib, python-pyinotify,
+	python-pysendfile, python-pyxb, python-requests, python-six,
+	python-twisted, python-webpy, python-werkzeug,
+	python-zope-interface, qt5cinex, sigrok-cli, sofia-sip,
+	start-stop-daemon, szip, triggerhappy, ustr, vnstat, xorriso,
+	xtables-addons
+
+	Removed packages (target): bison, distcc, gob2, m4
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7556: make interactive CLI optional for nftables
+	#7730: Error while connecting Qt Cretaor to device
+	#7766: logrotate default gzip path is usually wrong
+	#7790: Invalid ext4 image generated by Buildroot
+
+2014.11, Released December 1st, 2014
+
+	Minor fixes.
+
+	Infrastructure: LD_LIBRARY_PATH handling tweak to ensure
+	current working directory isn't searched.
+
+	Updated/fixed packages: gd, gdb, libwebsockets, luajit, mono,
+	parted, shairport-sync, util-linux, xapp_bdftopcf,
+	xserver_xorg-server
+
+2014.11-rc3, Released November 28th, 2014
+
+	Fixes all over the tree.
+
+	System: File permissions of /etc/random-seed made more
+	restrictive.
+
+	Toolchain: Various fixes related to locale handling, a fix for
+	building the toolchain wrapper on MIPS.
+
+	Updated/fixed packages: bind, binutils. botan, btrfsprogs,
+	clamav, czmq, dhcp, dillo, dovecot, erlang, flac, gd, glibc,
+	gptfdisk, gst1-validate, heirloom-mailx, lame, libksba,
+	libllcp, libnspr, libpng, libshairplay, libtirpc, linux,
+	linux-headers, mpdecimal, mpg123, network-manager, nfstables,
+	nfs-utils, openssl, pcituils, qt, radvd, rtai, sqlcipher,
+	sstrip, tcpdump, uclibc, uemacs, ushare, wayland, weston,
+	xl2tp, xserver_xorg-server
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7670: Fails to build mpc-1.0.2 on latest Cygwin
+
+2014.11-rc2, Released November 21st, 2014
+
+	Fixes all over the tree.
+
+	Inittab tweaks for shutdown handling (busybox and sysvinit).
+
+	Updated/fixed packages: aircrack-ng, botan, canfestival,
+	clamav, coreutils, czmq, dbus, dovecot, duma, e2fsprogs,
+	erlang, gcc, iputils, libcap, libgcrypt, libmemcached,
+	libssh2, libunwind, libv4l, linux-headers, mesa3d-demos, mutt,
+	mysql, ndisc6, nodejs, omniorb, perl-cross, php,
+	python-tornado, python3, qemu, qt5base, qt5webkit, rpm,
+	rt-tests, ruby, schifra, sdl_sound, shairport-sync, sysvinit,
+	tstools, tzdata, wireshark, x264
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7646: strftime on datetime not works on python3
+
+2014.11-rc1, Released November 12th, 2014
+
+	Fixes all over the tree and new features.
+
+	Toolchains: Use -mcpu / -march instead of -mtune. Support
+	additional ARC and sparc variants. Updated Code sourcery
+	and Linaro external toolchains.
+
+	Defconfigs: Freescale iMX6DL SabreSD, Minnowboard MAX, QEMU
+	powerpc64 pseries added and a number of updates to the
+	existing configurations.
+
+	Infrastructure: Buildroot is now less noisy when built with
+	the silent option (make -s).
+	A number of package infrastructure variables have been renamed
+	from *_OPT to *_OPTS for constency. Buildroot will complain if
+	the old names are used to assist in updating out of tree
+	packages.
+	Fixes for host systems where bash isn't located in /bin, and
+	older systems not supporting mktemp --tmpdir.
+	Various cleanups of users/groups in the default skeleton.
+	There is now an option to choose what shell /bin/sh points to.
+
+	Documentation: Various updates to the user manual. The
+	asciidoc documentation handling has now been extended so it
+	can be used by (BR2_EXTERNAL) packages.
+
+	Updated/fixed packages: acl, acpid, agentpp, aircrack-ng,
+	alsa-lib, alsamixergui, alsa-utils, apitrace, apr, apr-util,
+	argus, arptables, at, atftp, atk, attr, audiofile, aumix,
+	automake, autossh, avahi, avrdude, axel, bandwidthd, bash,
+	bcusdk, beecrypt, bind, binutils, blackbox, bluez5_utils,
+	bluez_utils, bmon, boost, bootutils, bridge-utils,
+	btrfs-progs, busybox, bwm-ng, bzip2, ca-certificates, cairo,
+	ccache, ccid, ccrypt, cdrkit, cegui06, celt051, chrony,
+	cifs-utils, civetweb, cjson, clapack, classpath, cloog, cmake,
+	collectd, connman, copas, coreutils, coxpcall, cppcms, cppdb,
+	cppzmq, cramfs, crda, cryptsetup, ctorrent, cups, cvs, cwiid,
+	czmq, dash, dbus, dbus-cpp, dbus-glib, dbus-python, dejavu,
+	dhcp, dhcpcd, dhcpdump, dialog, dillo, directfb, distcc,
+	dmalloc, dmidecode, dmraid, dnsmasq, doc-asciidoc.mk,
+	dosfstools, dropbear, dropwatch, dstat, dtach, dtc, dvbsnoop,
+	e2fsprogs, ecryptfs-utils, ed, efl, eigen, elf2flt, elfutils,
+	enlightenment, enscript, erlang, espeak, ethtool, eudev,
+	evemu, evtest, exfat, exfat-utils, exim, expat, expect,
+	explorercanvas, faifa, fakeroot, fan-ctrl, fbdump,
+	fb-test-app, fetchmail, ffmpeg, file, filemq, findutils, flac,
+	flann, flickcurl, flite, fltk, fluxbox, fmc, fmlib,
+	fontconfig, foomatic-filters, freerdp, freescale-imx,
+	freetype, ftop, fxload, gamin, gcc, gd, gdb, gdk-pixbuf,
+	genimage, genpart, genromfs, geoip, gettext, giblib, git,
+	glibc, glib-networking, gmp, gmpc, gnu-efi, gnupg, gnupg2,
+	gnuplot, gnutls, google-breakpad, gpm, gpsd, gptfdisk,
+	gpu-viv-bin-mx6q, grantlee, grep, gsl, gst1-libav,
+	gst1-plugins-{bad,base,good,ugly}, gst-ffmpeg,
+	gst-fsl-plugins, gst-omx, gst-plugins-{bad,base,good,ugly},
+	gst-plugin-x170, gstreamer, gstreamer1, gtest, gtk2-engines,
+	gutenprint, gvfs, harfbuzz, haserl, haveged, hdparm, heimdal,
+	heirloom-mailx, hiawatha, hostapd, hplip, htop, httping,
+	hwdata, i2c-tools, icu, ifplugd, igh-ethercat, imagemagick,
+	imlib2, imx-lib, imx-vpu, inadyn, inotify-tools, input-tools,
+	intltool, iperf, iproute2, iprutils, ipsec-tools, ipset,
+	iptables, iputils, iw, jamvm, jansson, jasper, jimtcl, joe,
+	jpeg-turbo, jq, jquery-keyboard, jquery-mobile, jquery-ui,
+	jquery-ui-themes, jquery-validation, jsmin, json-c,
+	json-javascript, kbd, kexec, kexec-lite, keyutils, kismet,
+	kmod, knock, ktap, lame, lbase64, lbreakout2, lcdproc, lcms2,
+	lesstif, lftp, libaio, libao, libarchive, libargtable2,
+	libass, libassuan, libatasmart, libbluray, libbsd, libcap,
+	libcap-ng, libcdio, libcec, libcgicc, libcgroup, libcofi,
+	libconfig, libconfuse, libcurl, libdaemon, libdnet, libdrm,
+	libdvdnav, libecore, libedbus, libedit, libedje, libeet,
+	libelementary, libelf, libenca, libethumb, libevas,
+	libevas-generic-loaders, libevent, libexif, libeXosip2,
+	libffi, libftdi, libfuse, libgail, libgcrypt, libgeotiff,
+	libglade, libglib2, libgpgme, libgtk2, libhid, libidn,
+	libinput, libiscsi, libjson, libksba, liblockfile,
+	liblog4c-localtime, liblogging, libmad, libmatroska, libmbim,
+	libmemcached, libmicrohttpd, libmpdclient, libmpeg2, libndp,
+	libnfc, libnfs, libnftnl, libnl, libnspr, libnss, liboauth,
+	libogg, liboping, libosip2, libpcap, libpciaccess, libpfm4,
+	libplayer, libplist, libpng, libpthsem, libqmi, libqrencode,
+	libraw, libreplaygain, libroxml, librsvg, librtlsdr,
+	libsamplerate, libseccomp, libsecret, libshairplay, libsoc,
+	libsoup, libsoxr, libssh2, libstrophe, libsvg, libsvg-cairo,
+	libtasn1, libtheora, libtirpc, libtorrent, libubox, libuci,
+	libungif, liburcu, libusb, libuv, libv4l, libva,
+	libva-intel-driver, libvncserver, libvorbis, libvpx,
+	libwebsockets, libxcb, libxml2, libxml-parser-perl, libxmlrpc,
+	libxslt, lighttpd, linenoise, linknx, links, linphone,
+	linux-firmware, linux-fusion, linux-headers, linux-pam,
+	linux-zigbee, lite, live555, ljlinenoise, lmbench, lm-sensors,
+	localedef, lockdev, lockfile-progs, log4cxx, lpty, lrandom,
+	lrzsz, lshw, lsof, lsqlite3, ltp-testsuite, ltrace, ltris,
+	lttng-babeltrace, lttng-libust, lttng-modules, lttng-tools,
+	lua, luabitop, lua-coat, lua-coatpersistent, lua-csnappy,
+	lua-ev, luajit, luajson, lualogging, lua-messagepack,
+	lua-msgpack-native, luaposix, luarocks, luasec, luasocket,
+	luasql-sqlite3, lua-testmore, lunit, lvm2, lxc, lz4, lzlib,
+	lzma, m4, madplay, make, makedevs, Makefile.in,
+	matchbox-common, matchbox-desktop, matchbox-fakekey,
+	matchbox-keyboard, matchbox-lib, matchbox-panel,
+	matchbox-startup-monitor, matchbox-wm, mcrypt, mdadm,
+	media-ctl, mediastreamer, memcached, memstat, memtester,
+	mesa3d, metacity, midori, mii-diag, minidlna, mmc-utils,
+	modem-manager, mongoose, mongrel2, monit, mpc, mpd, mpdecimal,
+	mpfr, mpg123, mplayer, mrouted, msmtp, mtd, mtools, mtr,
+	musepack, musl, mutt, mxml, mysql, nano, nanocom, nbd, ncftp,
+	ncurses, ndisc6, ne10, neard, neon, netatalk, netperf,
+	netsnmp, nettle, net-tools, network-manager, newt, nfs-utils,
+	ngrep, nmap, nodejs, nss-mdns, ntfs-3g, ntp, numactl, nut,
+	nuttcp, ofono, ola, omap-u-boot-utils, omniorb,
+	on2-8170-modules, opencore-amr, opencv, openntpd, openobex,
+	openocd, openpowerlink, openssh, openssl, openswan,
+	opentyrian, opentyrian-data, openvpn, opkg, oprofile, opus,
+	opus-tools, orbit, orc, ortp, p11-kit, pango, parted,
+	pciutils, pcmanfm, pcre, pcsc-lite, perf, perl, perl-gd,
+	perl-gdgraph, perl-io-socket-ssl, perl-json-tiny,
+	perl-module-build, perl-mojolicious, perl-net-ssleay,
+	perl-path-tiny, perl-xml-libxml, perl-xml-parser, php,
+	php-geoip, php-gnupg, php-imagick, php-memcached, php-ssh2,
+	php-yaml, php-zmq, picocom, pifmrds, pinentry, pixman,
+	pkg-autotools.mk, pkg-cmake.mk, pkg-download.mk,
+	pkg-generic.mk, pkg-kconfig.mk, pkg-luarocks.mk, pkg-perl.mk,
+	pkg-python.mk, pkg-utils.mk, poco, polarssl, polkit, poppler,
+	popt, portaudio, portmap, postgresql, powerpc-utils, pppd,
+	pptp-linux, prboom, procps-ng, proftpd, protobuf, protobuf-c,
+	psmisc, ptpd2, pulseaudio, pv, pwgen, python, python3,
+	python-dialog, python-ipy, python-keyring, python-mad,
+	python-netifaces, python-numpy, python-protobuf, python-pyasn,
+	python-pyparsing, python-pyro, python-pyusb, python-serial,
+	python-setuptools, qdecoder, qemu, qextserialport, qjson, qt,
+	qt5, qt5base, qt5connectivity, qt5declarative, qt5enginio,
+	qt5graphicaleffects, qt5imageformats, qt5multimedia,
+	qt5quick1, qt5quickcontrols, qt5script, qt5sensors,
+	qt5serialport, qt5svg, qt5webkit, qt5webkit-examples,
+	qt5websockets, qt5x11extras, qt5xmlpatterns, qtuio, quagga,
+	quota, qwt, radvd, rapidjson, rdesktop, redis, rings, rpcbind,
+	rpi-firmware, rpi-userland, rpm, rp-pppoe, rrdtool,
+	rsh-redone, rsync, rsyslog, rtai, rtmpdump, rt-tests, rubix,
+	ruby, samba, sam-ba, samba4, sane-backends, schifra,
+	sconeserver, scons, screen, sdl, sdl_gfx, sdl_image,
+	sdl_mixer, sdl_net, sdl_sound, sdl_ttf, sed, ser2net,
+	setserial, sg3_utils, shared-mime-info, simicsfs, sispmctl,
+	slang, slirp, smcroute, smstools3, snmppp,
+	snowball-hdmiservice, socat, socketcand, sox, spawn-fcgi,
+	speex, spice, spice-protocol, sqlcipher, sqlite, squashfs,
+	squid, sredird, startup-notification, strace, stress,
+	strongswan, stunnel, subversion, sudo, sunxi-boards,
+	sunxi-cedarx, swig, sylpheed, synergy, sysklogd, sysstat,
+	systemd, sysvinit, taglib, tar, tcl, tcllib, tcpdump,
+	tcpreplay, texinfo, tftpd, thrift, thttpd, tiff, ti-utils,
+	tn5250, torsmo, trace-cmd, transmission, tslib, tstools,
+	tvheadend, twolame, tz, uboot-tools, uclibc, udisks, ulogd,
+	upmpdcli, upx, urg, usb_modeswitch, usbmount, usbredir,
+	usbutils, util-linux, valgrind, vde2, vim, vlc, vo-aacenc,
+	vorbis-tools, vpnc, vsftpd, vtun, wayland, webkit, webp,
+	webrtc-audio-processing, weston, wget, whois, wireless-regdb,
+	wireshark, wpa_supplicant, wvstreams, x11r7, x11vnc,
+	xapp_xcalc, xapp_xdm, xapp_xdpyinfo, xapp_xf86dga, xapp_xfs,
+	xapp_xinit, xapp_xkbevd, xapp_xmh, xapp_xrandr, xapp_xsm,
+	xbmc, xbmc-pvr-addons, xcb-proto, xcursor-transparent-theme,
+	xdriver_xf86-input-mouse, xdriver_xf86-video-{ast,intel},
+	xdriver_xf86-video-vmware, xenomai, xerces,
+	xfont_font-adobe-{100,75}dpi,
+	xfont_font-adobe-utopia-{100dpi,75dpi,type1},
+	xfont_font-alias, xfont_font-arabic-misc,
+	xfont_font-bh-100dpi, xfont_font-bh-75dpi,
+	xfont_font-bh-lucidatypewriter-100dpi,
+	xfont_font-bh-lucidatypewriter-75dpi, xfont_font-bh-ttf,
+	xfont_font-bh-type1, xfont_font-bitstream-100dpi,
+	xfont_font-bitstream-75dpi, xfont_font-bitstream-type1,
+	xfont_font-cronyx-cyrillic, xfont_font-cursor-misc,
+	xfont_font-daewoo-misc, xfont_font-dec-misc,
+	xfont_font-ibm-type1, xfont_font-isas-misc,
+	xfont_font-jis-misc, xfont_font-micro-misc,
+	xfont_font-misc-cyrillic, xfont_font-misc-ethiopic,
+	xfont_font-misc-meltho, xfont_font-misc-misc,
+	xfont_font-mutt-misc, xfont_font-schumacher-misc,
+	xfont_font-screen-cyrillic, xfont_font-sony-misc,
+	xfont_font-sun-misc, xfont_font-winitzki-cyrillic,
+	xfont_font-xfree86-type1, xfsprogs, xinetd, xkeyboard-config,
+	xlib_libdmx, xlib_libFS, xlib_libpciaccess, xlib_libSM,
+	xlib_libX11, xlib_libXaw, xlib_libXext, xlib_libXfont,
+	xlib_libXi, xlib_libXinerama, xlib_libXrandr, xlib_libXrender,
+	xlib_libXres, xlib_libXScrnSaver, xlib_libXt, xlib_libXv,
+	xlib_libXvMC, xlib_libXxf86dga, xlib_libXxf86vm, xmlstarlet,
+	xproto_xcmiscproto, xproto_xextproto, xscreensaver,
+	xserver_xorg-server, xterm, xz, zeromq, zlib, zlog, zmqpp,
+	znc, zsh, zxing
+
+	New packages: adwaita-icon-theme, am335x-pru-package,
+	bcache-tools, biosdevname, botan, canfestival, clamav,
+	cppunit, dos2unix, dovecot, dovecot-pigeonhole, getent, glm,
+	gst1-validate, hicolor-icon-theme, ipmitool, leafnode2,
+	libdvbcsa, libgtk3, libphidget, libshout, libunistring,
+	libupnpp, mesa3d-demos, modplugtools, mono, monolite, mp4v2,
+	netcat-openbsd, nginx, odhcploc, openvmtools,
+	phidgetwebservice, pps-tools, pure-ftpd,
+	python-configshell-fb, python-rtslib-fb, python-urwid, qlibc,
+	qt5location, shairport-sync, spidev_test, targetcli-fb,
+	tinyalsa, trinity, x264, yaml-cpp, ympd
+
+	Removed packages: libelf
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#261: New package: wxWidgets
+	#325: New package: ratpoison
+	#405: New package: OpenVZ tools
+	#1309: New package: rdiff-backup
+	#3427: New package: nginx
+	#3655: New package: libav
+	#3991: New Package: open-vm-tools (Vmware Tools)
+	#6878: dmraid: disabled on ARC
+	#6950: Full unicode support in ncurses
+	#7010: jamvm builds and runs fine under mips (be)
+	#7088: elfutils on Blackfin doesn't build
+	#7142: ecryptfs needs getent to run
+	#7280: CMake toolchain file uses the FORCE attribute on CMAKE_CXX_FLAGS
+	#7346: [2014.08rc3] vim-8ae50e3ef8bf.tar.gz can not be downloaded, ...
+	#7352: [2014.08-rc3] diffutils-3.3 failed on building
+	#7358: rpi-userland: linking with bcm_host doesn't give vc_dispmanx_*
+	#7364: monit builds a static application, even though BR2_PREFER_...
+	#7370: ngrep - requires --with-pcap-includes fully defined to find...
+	#7442: rootfs remount does not work as expected with sysvinit
+	#7448: Having export MACHINE="something" breaks glibc build on IMX6...
+	#7568: musl buildroot-toolchain does not put libgcc_s.so.1 into place
+	#7574: quota-4.01 fails to build statically
+
+2014.08, Released September 1st, 2014
+
+	Minor manual fixes/additions.
+
+	Updated/fixed packages: btrfs-progs, cmake, cppcms, exim,
+	lftp, libdaemon, libev, libgpgme, libiqrf, libnl, libplist,
+	libroxml, libwebsockets, mesa3d, mpd, mtdev2tuio, musepack,
+	perl-gd, php-geoip, php-gnupg, php-imagick, php-memcached,
+	php-ssh2, php-yaml, php-zmq, polarssl, ruby, systemd, taglib,
+	uboot-tools, upmpdcli, webkit, xapp_xfs, xapp_luit,
+	xscreensaver, yajl
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7346: vim-8ae50e3ef8bf.tar.gz can not be downloaded, 404 not found
+
+2014.08-rc3, Released August 26th, 2014
+
+	Minor fixes.
+
+	User manual update / restructuring.
+
+	Updated/fixed packages: cairo, ecryptfs-utils, gettext,
+	gstreamer, gstreamer1, gutenprint, icu, imagemagick, jack2,
+	lbreakout2, libevas-generic-loaders, libftdi, libinput,
+	libtorrent, ltris, msgpack, ntp, php, procps-ng, pulseaudio,
+	thrift, tvheadend, usb_modeswitch, xmlstarlet,
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7136: ecryptfs-utils needs gettext to run when glibc/eglibc...
+	#7322: libgomp dependency issue with imagemagick
+	#7328: Git dl of versions in x/y broken
+
+2014.08-rc2, Released August 18th, 2014
+
+	Fixes all over the tree.
+
+	User manual restructured / reworked.
+
+	Toolchain: Fix for C++ exceptions / pthread_exit() on
+	uClibc/glibc, C++-11 features with uClibc.
+
+	Updated/fixed packages: bandwidthd, bluez5_utils, empty,
+	espeak, fbv, ffmpeg, gd, gnupg2, gst1-plugin-good, iftop,
+	infozip, libcuefile, libeml, libnftl, localedef, ltrace,
+	matchbox, mpd, network-manager, nftables, ngrep, nut, openssl,
+	oprofile, perl, perl-net-ssleay, postgresql, pppd, procps-ng,
+	qt, subversion, synergy, systemd, tar, tftpd, webkit,
+	xapp_rstart, xbmc, xbmc-pvr-addons
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7124: Use BR toolchain externally results a non-bootable...
+	#7208: Glibc C++ aplications crash if they use exceptions
+	#7250: Cannot build with -std=c++11
+	#7262: Generating locale en_US.UTF-8 fails on 64bit fedora..
+	#7286: systemd 215 doesn't build
+
+2014.08-rc1, Released August 8th, 2014
+
+	Fixes all over the tree and new features.
+
+	Architecture: Powerpc64 BE/LE added, AVR32 deprecated.
+	Improved altivec / SPE /atomic instructions
+	handling. Additional PowerPC CPU variants added.
+
+	Defconfigs: Atmel SAMA5D3, Congatec QMX6, Lego ev3, TS-5x00,
+	qemu-system-xtensa, qemu-aarch64-virt added. A number of
+	tweaks to existing ones. lpc32xx defconfigs removed.
+
+	Toolchain: Microblaze support for internal musl toolchain.
+	Default to GCC 4.8 for internal toolchain, remove deprecated
+	4.3 and 4.6 versions.
+	External CodeSourcery / Linaro toolchain updates, option to
+	copy gconv libraries for external toolchains.
+
+	Infrastructure: graph-depends: misc fixes, transitive
+	dependencies are not drawn by default. Download handling is
+	now done using helper scripts. Integrity of downloads can now
+	be verified using sha* hashes. Subversion download now uses
+	peg revisions for robustness.
+	Legal-info: License info of local or overridden packages are
+	saved as well. Toolchain packages are also taken into account.
+	autotools: Static linking with libtool / v1.5 improvements.
+	Gettextize support, similar to autoreconf.
+	kconfig package infrastructure added.
+
+	Misc: Version selection for busybox dropped.
+
+	Updated/fixed packages: aespipe, aiccu, alsa-lib, alsa-utils,
+	alsamixergui, argus, armadillo, at, atftp, atk, avahi,
+	avrdude, axel, b43-firmware, b43-fwcutter, bandwidthd, bc,
+	bcusdk, beecrypt, bind, binutils, blackbox, bluez5_utils,
+	bmon, boa, bonnie, bootutils, bsdiff, btrfs-progs, bustle,
+	busybox, bwm-ng, bzip2, ca-certificates, cairo, can-utils,
+	ccache, ccrypt, chrony, cifs-utils, classpath, cloog, cmake,
+	collectd, connman, coreutils, cosmo, cppcms, cramfs, crda,
+	cryptodev-linux, cryptodev, ctorrent, cvs, dbus-cpp,
+	dbus-glib, dbus-python, dbus, dcron, dejavu, devmem2,
+	dfu-util, dhcp, dhcpcd, dhcpdump, dhrystone, dialog, dillo,
+	distcc, dmidecode, dmraid, dnsmasq, doom-wad, dropbear,
+	dropwatch, dsp-tools, dtv-scan-tables, dvb-apps, e2fsprogs,
+	e2tools, eeprog, eigen, elf2flt, elftosb, enlightenment,
+	enscript, espeak, ethtool, eudev, evemu, exim, expedite,
+	explorercanvas, ezxml, faifa, fan-ctrl, fconfig, feh,
+	fetchmail, ffmpeg, fftw, file, fio, fis, flann, flashrom,
+	flex, flot, fltk, fontconfig, freerdp, freescale-imx,
+	freetype, ftop, gcc, gd, gdb, genimage, genromfs, gettext,
+	giblib, glib-networking, glibc, gmp, gnupg, gnutls, gpm, gpsd,
+	gptfdisk, gpu-viv-bin-imx6q, gqview, grantlee, gst-ffmpeg,
+	gst-fsl-plugins, gst1-libav, gst1-plugins-bad,
+	gst1-plugins-ugly, gtk2-engines, gtk2-theme-hicolor, gtkperf,
+	gvfs, haserl, hdparm, hostapd, httping, i2c-tools, icu,
+	imagemagick, imx-lib, inadyn, inotify-tools, input-tools,
+	ipkg, iproute2, iputils, irda-utils, iw, jack2, jpeg, jquery,
+	jquery-keyboard, jquery-mobile, jquery-validation, jsmin, kbd,
+	kexec, kmod, knock, latencytop, lcdapi, leafpad, lesstif,
+	lftp, libaio, libarchive, libargtable2, libart, libatasmart,
+	libatomic_ops, libbsd, libcap-ng, libcec, libcgicc, libcgroup,
+	libconfuse, libcurl, libdrm, libdvdnav, libdvdread,
+	libeXosip2, libedit, liberation, libesmtp, libev, libevas,
+	libevdev, libevent, libfcgi, libffi, libfreefare, libfslcodec,
+	libfslparser, libfslvpuwrap, libgail, libgcrypt, libglade,
+	libglib2, libgpgme, libgtk2, libhid, libical, libiconv,
+	libiqrf, libjpeg, liblog4c-localtime, libmbus, libmicrohttpd,
+	libmms, libndp, libnftnl, libnl, libnspr, libnss, liboauth,
+	libpcap, libpng, libpthsem, libqmi, libraw, libraw1394,
+	librsvg, libsoc, libsoup, libsvgtiny, libsysfs, libtasn1,
+	libtirpc, libtorrent, libusb, libv4l, libwebsockets, libxcb,
+	libxml2, libyaml, links, linux-firmware, linux-fusion,
+	linux-headers, linux-pam, lite, live555, lm-sensors,
+	lockfile-progs, lpc3250loader, lshw, lsof, lsuio, ltrace,
+	ltris, lua-messagepack, luainterpreter, luajit, luaposix,
+	luarocks, lvm2, lxc, lz4, lzo, make, makedevs, mdadm,
+	mediastreamer, mesa3d, metacity, minidlna, mkpasswd,
+	modem-manager, mongoose, mpd, mpg123, msgpack, mtd, mtools,
+	mtr, musepack, musl, mysql, nano, nasm, nbd, ncurses, ndisc6,
+	netatalk, netplug, network-manager, nftables, ngircd, nodejs,
+	nss-mdns, ntp, nut, olsr, open2300, opencv, openntpd, openocd,
+	openpgm, openpowerlink, openssh, openssl, openswan, openvpn,
+	opkg, oprofile, opus-tools, orc, p910nd, pango, parted,
+	pax-utils, pcmanfm, perf, perl, perl-module-build, php,
+	pixman, pkgconf, poco, polarssl, popt, portmap, postgresql,
+	prboom, protobuf-c, proxychains-ng, psmisc, psplash, ptpd2,
+	python,
+	python-{bottle,dpkt,id3,mad,msgpack,nfc,pygame,pyzmq,simplejson},
+	python3, qhull, qt, qt5base, qt5connectivity, qt5declarative,
+	qt5graphicaleffects, qt5multimedia, qt5quickcontrols,
+	qt5sensors, qt5svg, qt5webkit, quagga, quota, radvd, rdesktop,
+	read-edid, rpcbind, rpi-firmware, rpi-userland, rpm,
+	rsh-redone, rsync, rt-tests, rtmpdump, rtorrent, rubix, ruby,
+	samba, samba4, sane-backends, sawman, sconeserver, setserial,
+	sg3_utils, shared-mime-info, smartmontools, smcroute, snappy,
+	socketcand, spawn-fcgi, sqlite, squashfs, squid, sredird,
+	startup-notification, statserial, strongswan, stunnel,
+	sunxi-mali, supervisor, synergy, sysklogd, sysprof, sysstat,
+	systemd, tcpdump, tcpreplay, texinfo, thrift, thttpd, ti-gfx,
+	ti-utils, tinyhttpd, torsmo, trace-cmd, transmission, tslib,
+	tstools, tvheadend, tzdata, uboot-tools, uclibc, udev,
+	udpcast, usb_modeswitch, usbmount, util-linux, valgrind, vim,
+	vlc, w_scan, wayland, webrtc-audio-processing, weston, wget,
+	wireless-regdb, wireless_tools, wireshark, wpa_supplicant,
+	xapp_{twm,xconsole,xcursorgen,xedit,xfs,xinit,xrandr},
+	xdriver_xf86-video-intel, xlib_lib{FS,ICE,Xext,Xfont,Xft,Xi},
+	xproto_fontsproto, xproto_inputproto, xserver_xorg-server,
+	x11vnc, xbmc, xbmc-addon-xvdr, xbmc-pvr-addons, xterm, xvkbd,
+	xz
+
+	New packages: flickcurl, fmc, fmlib, geoip, gnupg2,
+	google-breakpad, imx-vpu, isl, kexec-lite, libglew, libglu,
+	libinput, libksba, libmemcached, libmpdclient, librtlsdr,
+	libuv, libva, libva-intel-driver, linux-zigbee, memcached,
+	mpdecimal, ncmpc, opencore-amr, patchelf, perl-datetime-tiny,
+	perl-gd, perl-gdgraph, perl-gdtextutil, perl-io-socket-ssl,
+	perl-json-tiny, perl-mojolicious, perl-net-ssleay,
+	perl-path-tiny, perl-try-tiny, perl-xml-libxml,
+	perl-xml-namespacesupport, perl-xml-sax, perl-xml-sax-base,
+	php-geoip, php-memcached, pifmrds, pinentry, powerpc-utils,
+	procps-ng, pwgen, python-cffi, python-daemon, python-flup,
+	python-ipython, python-numpy, qt5enginio, qt5webkit-examples,
+	qt5websockets, simicsfs, sispmctl, sox, sshpass, tclap,
+	twolame, upmpdcli, whois, xlib_libxshmfence, xproto_dri3proto
+
+	Removed packages: procps
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5750: Doing a Buildroot build from /usr doesn't work
+	#5900: config flags to the Xenomai build system
+	#6230: Cannot compile gcc without threads (uClibc-based)
+	#6626: procps Unknown HZ value! (XX) Assume 100
+	#7118: Package "thrift" requires atomic operations
+	#7154: Local uClibc config file gets overwritten using ...
+	#7160: host-xz not built
+	#7166: hostapd: segfault when using RT5370
+	#7172: Name collision of rpath token expansion and internal..
+	#7178: NTPd package cannot sync time without a proper ntp.conf
+	#7184: supervisord depends on libxml2 implicitly
+	#7196: Unable to build on UBUNTU13.10
+	#7268: python 2.7 compilation issue on a Debian/Ubuntu ...
+
+2014.05, Released May 31st, 2014
+
+	Minor fixes.
+
+	Minor manual fixes. U-Boot now defaults to spl/u-boot-spl.bin
+	for the spl file.
+
+	Updated/fixed packages: exim, glibc, gnutls, libfribidi,
+	qt5base, qt5webkit, sysklogd, thrift, u-boot
+
+2014.05-rc3, Released May 28th, 2014
+
+	Minor fixes.
+
+	Updated/fixed packages: acl, attr, connman, dosfstools,
+	dropbear, dvb-apps, exim, flite, gdb, httping, hwdata,
+	lesstif, libnss, libv4l, lttng-babeltrace, midori, monit,
+	mplayer, php, python2, rdesktop, rpi-userland, ruby, samba,
+	samba4, slang, xbmc
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#7100: license info for package 'acl' missing
+	#7106: license info for package 'attr' missing
+	#7112: license info for package 'hwdata'
+
+2014.05-rc2, Released May 21st, 2014
+
+	Fixes all over the tree.
+
+	Stripping using sstrip has been deprecated.
+
+	BR2_EXTERNAL can now also be used to implement custom
+	filesystem types.
+
+	The newly added BR2_GRAPH_DEPTH variable to limit the depth of
+	the generated dependency graph has been renamed to
+	BR2_GRAPH_DEPS_OPTS, so additional options can be supported in
+	the future.
+
+	The virtual package infrastructure will now error out early
+	if multiple packages providing the same virtual package has
+	been enabled (E.G. opengl). This change requires that the
+	packages explicitly declare what virtual package(s) they
+	provide.
+
+	Updated/fixed packages: acpid, armadillo, avahi, bellagio,
+	btrfs-progs, cairo, clapack, directfb, duma, ecryptfs-utils,
+	elfutils, eudev, fbgrab, fio, flann, fluxbox, gdb, gpm,
+	gpu-viv-bin-mx6q, gst1-plugins-good, gst-plugins-good,
+	imagemagick, iprutils, ipsec-tools, jack2, libdvdnav,
+	libdvdread, libnss, libunwind, linux-headers, lsof, lua,
+	luajit, matchbox-keyboard, mesa3d, mpd, mplayer, mtr, mysql,
+	netsnmp, nodejs, openpowerlink, openvpn, pciutils,
+	php-imagick, postgresql, pulseaudio, qt5quick1, rpi-userland,
+	rsyslog, samba, samba4, sane-backends, sunxi-mali, systemd,
+	ti-gfx, tstools, udev, webkit, wpa_supplicant, xbmc,
+	xlib_libXpm, xserver_xorg-server, zyre
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#5396: Boot hangs when starting samba if BR2_ENABLE_LOCALE...
+	#7016: Git issues in resulting buildroot tar
+	#7094: pciutils doesn't build on Blackfin
+
+2014.05-rc1, Released May 13th, 2014
+
+	Fixes all over the tree and new features.
+
+	Architectures: Support for MIPS o32 ABI on MIPS-64 targets has
+	been removed. Building o32 ELF files for MIPS64 is an exotic
+	configuration that nobody should be using. If o32 is required,
+	then is better if it's built for MIPS 32-bit cores so only
+	32-bit instructions will be used leading to a more efficient
+	o32 usage.
+	Support for the ARM A12 variant and Intel corei7.
+
+	Configs: Minnowboard and Altera SoCkit added, QEMU updates.
+
+	Bootloaders: Grub2 and gummiboot support, syslinux support
+	extended.
+
+	Toolchains: GCC 4.9. Glibc 2.19. Support for the musl C
+	library for internal and external toolchains. 4.8-R3 support
+	for ARC, Internal toolchain support for Aarch64 and
+	Microblaze. Environment variable to control debug output of
+	toolchain wrapper renamed to BR2_DEBUG_WRAPPER to match the
+	other variables. Toolchain tuple vendor name can now be
+	customized. Updated external Linaro ARM/Aarch64
+	toolchains. Added external Linaro ARMEB toolchain.
+	A GDB gdbinit file is now generated for external toolchains to
+	automatically set the correct sysroot.
+
+	Kconfig handling for minimum kernel headers version required
+	for packages. Now packages needing specific kernel header
+	features can specify these requirements in Kconfig.
+
+	Infrastructure: Support for (but disabled as it leads to
+	unreproducible builds) toplevel parallel builds. See the
+	comment at the top of Makefile for details about how to enable
+	it and what the problems are if you want to test it.
+	Python package infrastructure extended to support Python 3.x
+	Perl and virtual package infrastructure support added.
+	PRE_*_HOOKS support for all build steps.
+
+	Updated/fixed packages: acpid, agentpp, aiccu, apr, avahi,
+	barebox, bash, beecrypt, bellagio, binutils, boost,
+	boot-wrapper-aarch64, bustle, busybox, ca-certificates, cairo,
+	ccache, ccid, cgilua, chrony, cifs-utils, civetweb, cmake,
+	collectd, connman, coreutils, coxpcall, cppcms, cppzmq, crda,
+	cryptodev, cryptsetup, cups, czmq, dbus, dhcpdump, directfb,
+	dmalloc, dmraid, dnsmasq, dosfstools, dsp-tools, dtc,
+	dvb-apps, ebtables, ecryptfs-utils, eigen, erlang, ethtool,
+	evemu, evtest, f2fs-tools, fdk-aac, feh, ffmpeg, file, filemq,
+	flac, flot, fmtools, fping, freetype, fswebcam, gcc, gd, gdb,
+	gettext, giblib, git, glibc, glibmm, glib-networking, gmp,
+	gnutls, gpm, gpsd, gpu-viv-bin-mx6q, grep, gst1-libav,
+	gst1-plugins-bad, gst1-plugins-base, gst1-plugins-good,
+	gst1-plugins-ugly, gst-ffmpeg, gst-fsl-plugins, gst-omx,
+	gst-plugins-good, gstreamer1, gvfs, harfbuzz, haveged,
+	hostapd, htop, httping, ifplugd, iftop, igmpproxy,
+	imagemagick, imlib2, imx-lib, infozip, intltool, iproute2,
+	ipsec-tools, ipset, jansson, jpeg, jpeg-turbo, jquery,
+	jquery-keyboard, jquery-ui, jquery-ui-themes, json-glib,
+	json-javascript, kexec, kmod, lame, lbase64, lbreakout2,
+	lcdproc, lftp, libao, libatasmart, libatomic_ops, libcap,
+	libcdio, libcec, libcgicc, libcgroup, libcurl, libdrm,
+	libdvdnav, libdvdread, libegl, libeio, libenca, libesmtp,
+	libevas, libevdev, libfribidi, libfslcodec, libfslparser,
+	libfslvpuwrap, libgail, libgles, libglib2, libgtk2, libhid,
+	libjpeg, libmbim, libmicrohttpd, libmodplug, libnftnl,
+	libnspr, libogg, libopenmax, libopenvg, libpcap, libplayer,
+	libpng, libpthread-stubs, librsvg, libsigsegv, libsocketcan,
+	libsoup, libtasn1, libtool, libtpl, libunwind, liburcu,
+	libusb, libwebsockets, libxcb, libxml2, libxmlpp, libyaml,
+	lighttpd, linphone, linux-firmware, linux-headers, ljsyscall,
+	lmbench, lsof, ltp-testsuite, ltris, lttng-babeltrace,
+	lttng-libust, lttng-modules, lttng-tools, lua, lua-cjson,
+	luacrypto, lua-ev, luaexpat, luaexpatutils, luafilesystem,
+	luainterpreter, luajit, lua-msgpack-native, luaposix,
+	luarocks, luasec, luasocket, luasql-sqlite3, lvm2, macchanger,
+	memstat, mesa3d, metacity, minidlna, mmc-utils,
+	mobile-broadband-provider-info, modem-manager, mongrel2,
+	monit, mpd, mplayer, msmtp, mtd, mtools, mutt, mysql, nasm,
+	ncurses, ne10, netatalk, netsnmp, nettle, network-manager,
+	newt, nfs-utils, nmap, nodejs, ntfs-3g, ntp, nut, ofono, ola,
+	olsr, omniorb, opencv, opengl, openpgm, openssh, openssl,
+	openswan, openvpn, orbit, orc, p11-kit, pango, parted,
+	pciutils, pcre, pcsc-lite, perf, perl, perl-xml-parser, php,
+	picocom, pixman, pkgconf, poppler, popt, portmap, powervr,
+	pppd, pptp-linux, proftpd, protobuf, protobuf-c, ptpd2,
+	pulseaudio, python, python3, python-bottle, python-m2crypto,
+	python-netifaces, python-pyasn, python-pycrypto,
+	python-pygame, python-pysnmp, python-pysnmp-apps,
+	python-pysnmp-mibs, python-serial, python-setuptools,
+	qextserialport, qt, qt5, qt5base, qt5connectivity,
+	qt5declarative, qt5graphicaleffects, qt5imageformats,
+	qt5multimedia, qt5quick1, qt5quickcontrols, qt5script,
+	qt5sensors, qt5serialport, qt5svg, qt5webkit, qt5x11extras,
+	qt5xmlpatterns, qtuio, qwt, radvd, readline, rings,
+	rpi-firmware, rpi-userland, rsh-redone, rsync, rsyslog, rtai,
+	rtmpdump, rt-tests, ruby, samba, sconeserver, scons, sdl,
+	sdl_image, sdl_mixer, sg3_utils, slang, smstools3, snmppp,
+	socat, speex, sqlcipher, sqlite, squashfs, squid, strongswan,
+	stunnel, sunxi-boards, sunxi-mali, sunxi-tools, sylpheed,
+	syslinux, sysstat, systemd, taglib, tcl, tcllib, tcpreplay,
+	tidsp-binaries, ti-gfx, tmux, tvheadend, tzdata, uboot,
+	uboot-tools, uclibc, udev, udisks, ulogd, usb_modeswitch,
+	usb_modeswitch_data, usbmount, util-linux, valgrind, vlc,
+	webkit, weston, wget, wireshark, wpa_supplicant, wsapi,
+	w_scan, xapp_appres, xapp_bdftopcf, xapp_beforelight,
+	xapp_bitmap, xapp_editres, xapp_fslsfonts, xapp_fstobdf,
+	xapp_iceauth, xapp_ico, xapp_mkfontscale, xapp_rgb,
+	xapp_rstart, xapp_sessreg, xapp_showfont, xapp_twm,
+	xapp_viewres, xapp_xauth, xapp_xbacklight, xapp_xcalc,
+	xapp_xclock, xapp_xditview, xapp_xdpyinfo, xapp_xdriinfo,
+	xapp_xev, xapp_xfd, xapp_xfontsel, xapp_xfs, xapp_xfsinfo,
+	xapp_xgc, xapp_xhost, xapp_xinit, xapp_xkbutils, xapp_xkill,
+	xapp_xload, xapp_xlsclients, xapp_xlsfonts, xapp_xmag,
+	xapp_xman, xapp_xmessage, xapp_xmodmap, xapp_xprop,
+	xapp_xrandr, xapp_xrdb, xapp_xrefresh, xapp_xset,
+	xapp_xsetroot, xapp_xsm, xapp_xstdcmap, xapp_xvidtune,
+	xapp_xvinfo, xapp_xwd, xapp_xwininfo, xcb-util-wm,
+	xdriver_xf86-input-evdev, xdriver_xf86-input-joystick,
+	xdriver_xf86-input-keyboard, xdriver_xf86-input-mouse,
+	xdriver_xf86-input-synaptics, xdriver_xf86-input-vmmouse,
+	xdriver_xf86-video-ark, xdriver_xf86-video-ast,
+	xdriver_xf86-video-ati, xdriver_xf86-video-cirrus,
+	xdriver_xf86-video-dummy, xdriver_xf86-video-fbdev,
+	xdriver_xf86-video-geode, xdriver_xf86-video-glide,
+	xdriver_xf86-video-glint, xdriver_xf86-video-i128,
+	xdriver_xf86-video-intel, xdriver_xf86-video-mach64,
+	xdriver_xf86-video-mga, xdriver_xf86-video-neomagic,
+	xdriver_xf86-video-newport, xdriver_xf86-video-nv,
+	xdriver_xf86-video-openchrome, xdriver_xf86-video-r128,
+	xdriver_xf86-video-savage, xdriver_xf86-video-siliconmotion,
+	xdriver_xf86-video-sis, xdriver_xf86-video-tdfx,
+	xdriver_xf86-video-tga, xdriver_xf86-video-trident,
+	xdriver_xf86-video-vesa, xdriver_xf86-video-vmware,
+	xdriver_xf86-video-voodoo, xenomai, xerces, xl2tp, xlib_libFS,
+	xlib_xtrans, xproto_xproto, xserver_xorg-server,
+	xutil_util-macros, zeromq, zic, zmqpp, zyre
+
+	New packages: armadillo, btrfs-progs, clapack, cosmo, dado,
+	dbus-triggerd, dtv-scan-tables, e2tools, eudev, exim, expect,
+	fetchmail, flann, flite, gnu-efi, grub2, gummiboot, heimdal,
+	iprutils, iptraf-ng, jack2, jquery-mobile, libee, libestr,
+	libgc, libgl, liblogging, libndp, libsoxr, libstrophe,
+	libubox, libuci, libxmlrpc, ljlinenoise, lpeg, lpty, lrandom,
+	lsqlite3, lua-coat, lua-coatpersistent, lua-csnappy, luajson,
+	lualogging, lua-messagepack, lua-testmore, lunit, lzip, lzlib,
+	musl, nftables, opentyrian, opentyrian-data,
+	perl-module-build, php-gnupg, php-imagick, php-ssh2, php-yaml,
+	php-zmq, postgresql, python-libconfig, python-pypcap,
+	python-pyrex, qdecoder, qhull, samba4, smack, tz, tzdump, ucl,
+	upx, vo-aacenc, xbmc, xbmc-addon-xvdr, xbmc-pvr-addons,
+	yaffs2utils, zlog, znc
+
+	Removed packages: crosstool-ng, python-distutilscross, vala
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#6842: Checking external toolchain for eabihf
+	#6956: Packaging libsoxr
+	#6986: Make legal-info fails on uboot versions before 2014.01
+	#6992: Incorrect installation rights on external kernel module..
+
+2014.02, Released February 27th, 2014
+
+	Minor fixes.
+
+	Updated/fixed packages: cegui06, cppdb, e2fsprogs, gcc, gdb,
+	gst1-plugins-bad, gstreamer, gstreamer1, haserl, imagemagick,
+	libpng, libxml2, lua, luajit, luarock, ncftp, openswan,
+	pcsc-lite, qt5connectivity, ramsmp, strongswan, vlc
+
+	Issues resolved (http://bugs.uclibc.org):
+
+	#6938: mkuser script generates wrong password for new user in..
+
 2014.02-rc3, Released February 25th, 2014
 
 	Minor fixes.

Config.in

@@ -18,6 +18,21 @@ config BR2_EXTERNAL
 	string
 	option env="BR2_EXTERNAL"
 
+# Hidden boolean selected by packages in need of Java in order to build
+# (example: xbmc)
+config BR2_NEEDS_HOST_JAVA
+	bool
+
+# Hidden boolean selected by packages in need of javac in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAVAC
+	bool
+
+# Hidden boolean selected by packages in need of jar in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAR
+	bool
+
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
 # toolchains, binary tools like SAM-BA, etc.).
@@ -181,7 +196,7 @@ config BR2_BACKUP_SITE
 
 config BR2_KERNEL_MIRROR
 	string "Kernel.org mirror"
-	default "http://www.kernel.org/pub"
+	default "https://www.kernel.org/pub"
 	help
 	  kernel.org is mirrored on a number of servers around the world.
 	  The following allows you to select your preferred mirror.
@@ -205,26 +220,27 @@ config BR2_GNU_MIRROR
 	     http://ftp.gnu.org/pub/gnu
 	     http://mirror.aarnet.edu.au/pub/gnu
 
-config BR2_DEBIAN_MIRROR
-	string "Debian Software mirror"
-	default "http://ftp.debian.org"
-	help
-	  Debian has multiple software mirrors scattered around the world.
-	  The following allows you to select your preferred mirror.
-
-	  Usually, just add your country code like XX here:
-	  http://ftp.XX.debian.org
-
 endif
 
 config BR2_LUAROCKS_MIRROR
 	string "LuaRocks mirror"
-	default "http://luarocks.org/repositories/rocks"
+	default "http://rocks.moonscript.org"
 	help
 	  LuaRocks repository.
 
 	  See http://luarocks.org
 
+config BR2_CPAN_MIRROR
+	string "CPAN mirror (Perl packages)"
+	default "http://cpan.metacpan.org"
+	help
+	  CPAN (Comprehensive Perl Archive Network) is a repository
+	  of Perl packages. It has multiple software mirrors scattered
+	  around the world. This option allows you to select a mirror.
+
+	  The list of mirrors is available at:
+	  http://search.cpan.org/mirror
+
 endmenu
 
 config BR2_JLEVEL
@@ -240,7 +256,7 @@ config BR2_CCACHE
 	help
 	  This option will enable the use of ccache, a compiler
 	  cache. It will cache the result of previous builds to speed
-	  up future builds. The cache is stored in
+	  up future builds. By default, the cache is stored in
 	  $HOME/.buildroot-ccache.
 
 	  Note that Buildroot does not try to invalidate the cache
@@ -250,36 +266,54 @@ config BR2_CCACHE
 	  ccache cache by removing the $HOME/.buildroot-ccache
 	  directory.
 
+if BR2_CCACHE
+
 config BR2_CCACHE_DIR
 	string "Compiler cache location"
-	depends on BR2_CCACHE
 	default "$(HOME)/.buildroot-ccache"
 	help
 	  Where ccache should store cached files.
 
-config BR2_DEPRECATED
-	bool "Show packages that are deprecated or obsolete"
+config BR2_CCACHE_INITIAL_SETUP
+	string "Compiler cache initial setup"
 	help
-	  This option hides outdated/obsolete versions of packages.
+	  Initial ccache settings to apply, such as --max-files or --max-size.
+
+	  For example, if your project is known to require more space than the
+	  default max cache size, then you might want to increase the cache size
+	  to a suitable amount using the -M (--max-size) option.
+
+	  The string you specify here is passed verbatim to ccache.  Refer to
+	  ccache documentation for more details.
+
+	  These initial settings are applied after ccache has been compiled.
+
+endif
+
+config BR2_DEPRECATED
+	bool "Show options and packages that are deprecated or obsolete"
+	help
+	  This option shows outdated/obsolete versions of packages and
+	  options that are otherwise hidden.
 
 if BR2_DEPRECATED
 
-config BR2_DEPRECATED_SINCE_2013_05
-	bool
-	default y
-
-config BR2_DEPRECATED_SINCE_2013_08
-	bool
-	default y
-
-config BR2_DEPRECATED_SINCE_2013_11
-	bool
-	default y
-
 config BR2_DEPRECATED_SINCE_2014_02
 	bool
 	default y
 
+config BR2_DEPRECATED_SINCE_2014_05
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2014_08
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_02
+	bool
+	default y
+
 endif
 
 config BR2_ENABLE_DEBUG
@@ -340,6 +374,7 @@ config BR2_STRIP_sstrip
 	bool "sstrip"
 	select BR2_PACKAGE_SSTRIP_HOST
 	depends on !BR2_PACKAGE_HOST_ELF2FLT
+	depends on BR2_DEPRECATED_SINCE_2014_05
 	help
 	  Binaries and libraries in the target filesystem will be
 	  stripped using the 'sstrip' command, which strips a little
@@ -440,6 +475,39 @@ config BR2_OPTIMIZE_S
 
 endchoice
 
+config BR2_GOOGLE_BREAKPAD_ENABLE
+	bool "Enable google-breakpad support"
+	select BR2_PACKAGE_GOOGLE_BREAKPAD
+	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
+	help
+	  This option will enable the use of google breakpad, a
+	  library and tool suite that allows you to distribute an
+	  application to users with compiler-provided debugging
+	  information removed, record crashes in compact "minidump"
+	  files, send them back to your server and produce C and C++
+	  stack traces from these minidumps.  Breakpad can also write
+	  minidumps on request for programs that have not crashed.
+
+if BR2_GOOGLE_BREAKPAD_ENABLE
+
+config BR2_GOOGLE_BREAKPAD_INCLUDE_FILES
+	string "List of executables and libraries to extract symbols from"
+	default ""
+	help
+	  You may specify a space-separated list of binaries and
+	  libraries with full paths relative to $(TARGET_DIR) of which
+	  debug symbols will be dumped for further use with google
+	  breakpad.
+
+	  A directory structure that can be used by minidump-stackwalk
+	  will be created at:
+
+	  $(STAGING_DIR)/usr/share/google-breakpad-symbols
+
+endif
+
 config BR2_ENABLE_SSP
 	bool "build code with Stack Smashing Protection"
 	depends on BR2_TOOLCHAIN_HAS_SSP
@@ -457,20 +525,50 @@ config BR2_ENABLE_SSP
 comment "enabling Stack Smashing Protection requires support in the toolchain"
 	depends on !BR2_TOOLCHAIN_HAS_SSP
 
-config BR2_PREFER_STATIC_LIB
-	bool "prefer static libraries"
+choice
+	bool "libraries"
+	default BR2_SHARED_LIBS if BR2_BINFMT_SUPPORTS_SHARED
+	default BR2_STATIC_LIBS if !BR2_BINFMT_SUPPORTS_SHARED
 	help
-	  Where possible, build and use static libraries for the target.
-	  This potentially increases your code size and should only be
-	  used if you know what you do.
-	  The default is to build dynamic libraries and use those on
-	  the target filesystem.
+	  Select the type of libraries you want to use on the target.
+
+	  The default is to build dynamic libraries and use those on
+	  the target filesystem, except when the architecture and/or
+	  the selected binary format does not support shared
+	  libraries.
+
+config BR2_STATIC_LIBS
+	bool "static only"
+	help
+	  Build and use only static libraries. No shared libraries
+	  will be instaled on the target. This potentially increases
+	  your code size and should only be used if you know what you
+	  are doing. Note that some packages may not be available when
+	  this option is enabled, due to their need for dynamic
+	  library support.
+
+config BR2_SHARED_LIBS
+	bool "shared only"
+	depends on BR2_BINFMT_SUPPORTS_SHARED
+	help
+	  Build and use only shared libraries. This is the recommended
+	  solution as it saves space and build time.
+
+config BR2_SHARED_STATIC_LIBS
+	bool "both static and shared"
+	depends on BR2_BINFMT_SUPPORTS_SHARED
+	help
+	  Build both shared and static libraries, but link executables
+	  dynamically. While building both shared and static libraries
+	  take more time and more disk space, having static libraries
+	  may be useful to link some of the applications statically.
+
+endchoice
 
-	  WARNING: This is highly experimental at the moment.
 
 config BR2_PACKAGE_OVERRIDE_FILE
 	string "location of a package override file"
-	default "$(TOPDIR)/local.mk"
+	default "$(CONFIG_DIR)/local.mk"
 	help
 	  A package override file is a short makefile that contains
 	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
@@ -497,6 +595,26 @@ config BR2_GLOBAL_PATCH_DIR
 	  Otherwise, if the directory <global-patch-dir>/<packagename> exists,
 	  then all *.patch files in the directory will be applied.
 
+menu "Advanced"
+
+config BR2_COMPILER_PARANOID_UNSAFE_PATH
+	bool "paranoid check of library/header paths"
+	help
+	  By default, when this option is disabled, when the Buildroot
+	  cross-compiler will encounter an unsafe library or header
+	  path (such as /usr/include, or /usr/lib), the compiler will
+	  display a warning.
+
+	  By enabling this option, this warning is turned into an
+	  error, which will completely abort the build when such
+	  unsafe paths are encountered.
+
+	  Note that this mechanism is available for both the internal
+	  toolchain (through gcc and binutils patches) and external
+	  toolchain backends (through the external toolchain wrapper).
+
+endmenu
+
 endmenu
 
 source "toolchain/Config.in"

Config.in.legacy

@@ -98,6 +98,654 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
+###############################################################################
+
+comment "Legacy options removed in 2015.02"
+
+config BR2_PACKAGE_WDCTL
+	bool "util-linux' wdctl option has been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_UTIL_LINUX_WDCTL
+	help
+	  util-linux' wdctl option has been renamed to BR2_PACKAGE_UTIL_LINUX_WDCTL
+	  to be aligned with how the other options are named.
+
+config BR2_PACKAGE_RPM_BZIP2_PAYLOADS
+	bool "rpm's bzip2 payloads option has been removed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_BZIP2
+	help
+	  The bzip2 payloads option rely entirely on the dependant package bzip2.
+	  So, you need to select it to enable this feature.
+
+config BR2_PACKAGE_RPM_XZ_PAYLOADS
+	bool "rpm's xz payloads option has been removed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_XZ
+	help
+	  The xz payloads option rely entirely on the dependant package xz.
+	  So, you need to select it to enable this feature.
+
+config BR2_PACKAGE_M4
+	bool "m4 target package removed"
+	select BR2_LEGACY
+	help
+	  The m4 target package has been removed, it's been
+	  deprecated for some time now.
+
+config BR2_PACKAGE_FLEX_BINARY
+	bool "flex binary in target option removed"
+	select BR2_LEGACY
+	help
+	  The flex binary in the target option has been removed.
+	  It's been deprecated for some time now and is essentially a
+	  development tool which isn't very useful in the target.
+
+config BR2_PACKAGE_BISON
+	bool "bison target package removed"
+	select BR2_LEGACY
+	help
+	  The bison target package has been removed, it's been
+	  deprecated for some time now and is essentially a development
+	  tool which isn't very useful in the target.
+
+config BR2_PACKAGE_GOB2
+	bool "gob2 target package removed"
+	select BR2_LEGACY
+	help
+	  The gob2 target package has been removed, it's been
+	  deprecated for some time now and was essentially useless
+	  without a target toolchain.
+
+config BR2_PACKAGE_DISTCC
+	bool "distcc target package removed"
+	select BR2_LEGACY
+	help
+	  The distcc target package has been removed, it's been
+	  deprecated for some time now and was essentially useless
+	  without a target toolchain.
+
+config BR2_PACKAGE_HASERL_VERSION_0_8_X
+	bool "haserl 0.8.x version removed"
+	select BR2_LEGACY
+	help
+	  The 0.8.x version option for haserl has been removed since it
+	  has been deprecated for some time now.
+	  You should be able to use the 0.9.x version without issues.
+
+config BR2_PACKAGE_STRONGSWAN_TOOLS
+	bool "strongswan option has been removed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_STRONGSWAN_PKI
+	select BR2_PACKAGE_STRONGSWAN_SCEP
+	help
+	  The tools option has been removed upstream and the different tools
+	  have been split between the pki and scep options, with others
+	  deprecated.
+
+config BR2_PACKAGE_XBMC_ADDON_XVDR
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_ADDON_XVDR
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_PVR_ADDONS
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_PVR_ADDONS
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_ALSA_LIB
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_ALSA_LIB
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_AVAHI
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_AVAHI
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_DBUS
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_DBUS
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBBLURAY
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBBLURAY
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_GOOM
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_GOOM
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_RSXS
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_RSXS
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBCEC
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBCEC
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBMICROHTTPD
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBMICROHTTPD
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBNFS
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBNFS
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_RTMPDUMP
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_RTMPDUMP
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBSHAIRPLAY
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBSHAIRPLAY
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBSMBCLIENT
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBSMBCLIENT
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBTHEORA
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBTHEORA
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBUSB
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBUSB
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_LIBVA
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_LIBVA
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PACKAGE_XBMC_WAVPACK
+	bool "xbmc options have been renamed"
+	select BR2_LEGACY
+	select BR2_PACKAGE_KODI_WAVPACK
+	help
+	  The XBMC media center project was renamed to Kodi entertainment center
+
+config BR2_PREFER_STATIC_LIB
+	bool "static library option renamed"
+	select BR2_LEGACY
+	help
+	  The BR2_PREFER_STATIC_LIB was renamed to BR2_STATIC_LIBS. It
+	  highlights the fact that the option no longer "prefers"
+	  static libraries, but "enforces" static libraries (i.e
+	  shared libraries are completely unused).
+
+	  Take care of updating the type of libraries you want under the
+	  "Build options" menu.
+
+###############################################################################
+comment "Legacy options removed in 2014.11"
+
+config BR2_x86_generic
+	bool "x86 generic variant has been removed"
+	select BR2_LEGACY
+	help
+	  The generic x86 CPU variant has been removed. Use another
+	  CPU variant instead.
+
+config BR2_GCC_VERSION_4_4_X
+	bool "gcc 4.4.x has been removed"
+	select BR2_LEGACY
+	help
+	  The 4.4.x version of gcc has been removed. Use a newer
+	  version instead.
+
+config BR2_sparc_sparchfleon
+	bool "sparchfleon CPU has been removed"
+	select BR2_LEGACY
+	help
+	  The sparchfleon CPU was only supported in a patched gcc 4.4
+	  version. Its support has been removed in favor of the leon3
+	  CPU starting from gcc 4.8.x.
+
+config BR2_sparc_sparchfleonv8
+	bool "sparchfleonv8 CPU has been removed"
+	select BR2_LEGACY
+	help
+	  The sparchfleonv8 CPU was only supported in a patched gcc
+	  4.4 version. Its support has been removed in favor of the
+	  leon3 CPU starting from gcc 4.8.x.
+
+config BR2_sparc_sparcsfleon
+	bool "sparcsfleon CPU has been removed"
+	select BR2_LEGACY
+	help
+	  The sparcsfleon CPU was only supported in a patched gcc 4.4
+	  version. Its support has been removed in favor of the leon3
+	  CPU starting from gcc 4.8.x.
+
+config BR2_sparc_sparcsfleonv8
+	bool "sparcsfleonv8 CPU has been removed"
+	select BR2_LEGACY
+	help
+	  The sparcsfleonv8 CPU was only supported in a patched gcc
+	  4.4 version. Its support has been removed in favor of the
+	  leon3 CPU starting from gcc 4.8.x.
+
+config BR2_PACKAGE_XLIB_LIBPCIACCESS
+	bool "xlib-libpciaccess option has been renamed"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_LEGACY
+	select BR2_PACKAGE_LIBPCIACCESS
+	help
+	  libpciaccess neither depends on X11 nor Xlib. Thus the
+	  package has been renamed BR2_PACKAGE_LIBPCIACCESS
+
+config BR2_PACKAGE_LINUX_FIRMWARE_XC5000
+	bool "Xceive xc5000 option has been renamed"
+	select BR2_PACKAGE_LINUX_FIRMWARE_XCx000
+	help
+	  The Xceive xc5000 option now also handles older firmwares from
+	  Xceive (the xc4000 series), as well as new firmwares (the xc5000c)
+	  from Cresta, who bought Xceive.
+
+config BR2_PACKAGE_LINUX_FIRMWARE_CXGB4
+	bool "Chelsio T4 option has been renamed"
+	select BR2_PACKAGE_LINUX_FIRMWARE_CXGB4_T4
+	help
+	  The Chelsio T4 option BR2_PACKAGE_LINUX_FIRMWARE_CXGB4
+	  has been renamed to BR2_PACKAGE_LINUX_FIRMWARE_CXGB4_T4
+	  to better account for the fact that a T5 variant exists.
+
+config BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_7
+	bool "BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_7 has been renamed"
+	help
+	  The option BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_7 was
+	  renamed to BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_REV_7. You must
+	  select it in:
+	      Target packages -> Hardware handling ->
+	      Firmware -> linux-firmware -> WiFi firmware ->
+	      iwlwifi 3160/726x revision to use (revision 7)
+
+config BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_8
+	bool "BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_8 has been renamed"
+	help
+	  The option BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_3160_7260_8 was
+	  renamed to BR2_PACKAGE_LINUX_FIRMWARE_IWLWIFI_REV_8. You must
+	  select it in:
+	      Target packages -> Hardware handling ->
+	      Firmware -> linux-firmware -> WiFi firmware ->
+	      iwlwifi 3160/726x revision to use (revision 8)
+
+###############################################################################
+comment "Legacy options removed in 2014.08"
+
+config BR2_PACKAGE_LIBELF
+	bool "libelf has been removed"
+	select BR2_PACKAGE_ELFUTILS
+	select BR2_LEGACY
+	help
+	  The libelf package provided an old version of the libelf library
+	  and is deprecated. The libelf library is now provided by the
+	  elfutils package.
+
+config BR2_KERNEL_HEADERS_3_8
+	bool "kernel headers version 3.8.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_9
+	select BR2_LEGACY
+	help
+	  Version 3.8.x of the Linux kernel headers have been deprecated
+	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.9.x of the headers have been
+	  automatically selected in your configuration.
+
+config BR2_PACKAGE_GETTEXT_TOOLS
+	bool "support for gettext-tools on target has been removed"
+	select BR2_LEGACY
+	help
+	  The option to install the gettext utilities on the target
+	  has been removed. This is not necessary as Buildroot is not
+	  designed to provide a full development environment on the
+	  target. gettext tools should be used on the build machine
+	  instead.
+
+config BR2_PACKAGE_PROCPS
+	bool "procps has been replaced by procps-ng"
+	select BR2_PACKAGE_PROCPS_NG
+	select BR2_LEGACY
+	help
+	  The procps package has been replaced by the equivalent procps-ng.
+
+config BR2_BINUTILS_VERSION_2_20_1
+	bool "binutils 2.20.1 has been removed"
+	select BR2_LEGACY
+	help
+	  The 2.20.1 version of binutils has been removed. Use a newer
+	  version instead.
+
+config BR2_BINUTILS_VERSION_2_21
+	bool "binutils 2.21 has been removed"
+	select BR2_LEGACY
+	help
+	  The 2.21 version of binutils has been removed. Use a newer
+	  version instead.
+
+config BR2_BINUTILS_VERSION_2_23_1
+	bool "binutils 2.23.1 has been removed"
+	select BR2_LEGACY
+	help
+	  The 2.23.1 version of binutils has been removed. Use a newer
+	  version instead.
+
+config BR2_UCLIBC_VERSION_0_9_32
+	bool "uclibc 0.9.32 has been removed"
+	select BR2_LEGACY
+	help
+	  The 0.9.32 version of uClibc has been removed. Use a newer
+	  version instead.
+
+config BR2_GCC_VERSION_4_3_X
+	bool "gcc 4.3.x has been removed"
+	select BR2_LEGACY
+	help
+	  The 4.3.x version of gcc has been removed. Use a newer
+	  version instead.
+
+config BR2_GCC_VERSION_4_6_X
+	bool "gcc 4.6.x has been removed"
+	select BR2_LEGACY
+	help
+	  The 4.6.x version of gcc has been removed. Use a newer
+	  version instead.
+
+config BR2_GDB_VERSION_7_4
+	bool "gdb 7.4 has been removed"
+	select BR2_LEGACY
+	help
+	  The 7.4 version of gdb has been removed. Use a newer version
+	  instead.
+
+config BR2_GDB_VERSION_7_5
+	bool "gdb 7.5 has been removed"
+	select BR2_LEGACY
+	help
+	  The 7.5 version of gdb has been removed. Use a newer version
+	  instead.
+
+config BR2_BUSYBOX_VERSION_1_19_X
+	bool "busybox version selection has been removed"
+	select BR2_LEGACY
+	help
+	  The possibility of selecting the Busybox version has been
+	  removed. Use the latest version provided by the Busybox
+	  package instead.
+
+config BR2_BUSYBOX_VERSION_1_20_X
+	bool "busybox version selection has been removed"
+	select BR2_LEGACY
+	help
+	  The possibility of selecting the Busybox version has been
+	  removed. Use the latest version provided by the Busybox
+	  package instead.
+
+config BR2_BUSYBOX_VERSION_1_21_X
+	bool "busybox version selection has been removed"
+	select BR2_LEGACY
+	help
+	  The possibility of selecting the Busybox version has been
+	  removed. Use the latest version provided by the Busybox
+	  package instead.
+
+config BR2_PACKAGE_LIBV4L_DECODE_TM6000
+	bool "decode_tm6000"
+	select BR2_PACKAGE_LIBV4L_UTILS
+	select BR2_LEGACY
+	help
+	  This libv4l option has been deprecated and replaced by a single
+	  option to build all the libv4l utilities.
+
+config BR2_PACKAGE_LIBV4L_IR_KEYTABLE
+	bool "ir-keytable"
+	select BR2_PACKAGE_LIBV4L_UTILS
+	select BR2_LEGACY
+	help
+	  This libv4l option has been deprecated and replaced by a single
+	  option to build all the libv4l utilities.
+
+config BR2_PACKAGE_LIBV4L_V4L2_COMPLIANCE
+	bool "v4l2-compliance"
+	select BR2_PACKAGE_LIBV4L_UTILS
+	select BR2_LEGACY
+	help
+	  This libv4l option has been deprecated and replaced by a single
+	  option to build all the libv4l utilities.
+
+config BR2_PACKAGE_LIBV4L_V4L2_CTL
+	bool "v4l2-ctl"
+	select BR2_PACKAGE_LIBV4L_UTILS
+	select BR2_LEGACY
+	help
+	  This libv4l option has been deprecated and replaced by a single
+	  option to build all the libv4l utilities.
+
+config BR2_PACKAGE_LIBV4L_V4L2_DBG
+	bool "v4l2-dbg"
+	select BR2_PACKAGE_LIBV4L_UTILS
+	select BR2_LEGACY
+	help
+	  This libv4l option has been deprecated and replaced by a single
+	  option to build all the libv4l utilities.
+
+###############################################################################
+comment "Legacy options removed in 2014.05"
+
+config BR2_PACKAGE_EVTEST_CAPTURE
+	bool "evtest-capture support removed (dropped since evtest 1.31)"
+	select BR2_LEGACY
+	help
+	  Support for evtest-capture has been removed (dropped from
+	  evtest package since version 1.31), use evemu package
+	  instead.
+
+config BR2_KERNEL_HEADERS_3_6
+	bool "kernel headers version 3.6.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_9
+	select BR2_LEGACY
+	help
+	  Version 3.6.x of the Linux kernel headers have been deprecated
+	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.8.x of the headers have been
+	  automatically selected in your configuration.
+
+config BR2_KERNEL_HEADERS_3_7
+	bool "kernel headers version 3.7.x are no longer supported"
+	select BR2_KERNEL_HEADERS_3_9
+	select BR2_LEGACY
+	help
+	  Version 3.7.x of the Linux kernel headers have been deprecated
+	  for more than four buildroot releases and are now removed.
+	  As an alternative, version 3.8.x of the headers have been
+	  automatically selected in your configuration.
+
+config BR2_PACKAGE_VALA
+	bool "vala target package has been removed"
+	select BR2_LEGACY
+	help
+	  The 'vala' target package has been removed since it has been
+	  deprecated for more than four buildroot releases.
+	  Note: the host vala package still exists.
+
+config BR2_TARGET_TZ_ZONELIST
+	default BR2_PACKAGE_TZDATA_ZONELIST if BR2_PACKAGE_TZDATA_ZONELIST != ""
+
+config BR2_PACKAGE_TZDATA_ZONELIST
+	string "tzdata: the timezone list option has been renamed"
+	help
+	  The option BR2_PACKAGE_TZDATA_ZONELIST has been renamed to
+	  BR2_TARGET_TZ_ZONELIST, and moved to the "System configuration"
+	  menu. You'll need to select BR2_TARGET_TZ_INFO.
+
+config BR2_PACKAGE_TZDATA_ZONELIST_WRAP
+	bool
+	default y if BR2_PACKAGE_TZDATA_ZONELIST != ""
+	select BR2_LEGACY
+
+config BR2_PACKAGE_LUA_INTERPRETER_EDITING_NONE
+	bool "Lua command-line editing none has been renamed"
+	select BR2_LEGACY
+	help
+	  The BR2_PACKAGE_LUA_INTERPRETER_EDITING_NONE option has been
+	  renamed to BR2_PACKAGE_LUA_EDITING_NONE. You will have to select
+	  it in the corresponding choice.
+
+config BR2_PACKAGE_LUA_INTERPRETER_READLINE
+	bool "Lua command-line editing using readline has been renamed"
+	select BR2_LEGACY
+	help
+	  The BR2_PACKAGE_LUA_INTERPRETER_READLINE option has been
+	  renamed to BR2_PACKAGE_LUA_READLINE. You will have to select
+	  it in the corresponding choice.
+
+config BR2_PACKAGE_LUA_INTERPRETER_LINENOISE
+	bool "Lua command-line editing using linenoise has been renamed"
+	select BR2_LEGACY
+	help
+	  The BR2_PACKAGE_LUA_INTERPRETER_LINENOISE option has been
+	  renamed to BR2_PACKAGE_LUA_LINENOISE. You will have to select
+	  it in the corresponding choice.
+
+config BR2_PACKAGE_DVB_APPS_UTILS
+	bool "dvb-apps utilities now built by default"
+	select BR2_LEGACY
+	help
+	  The dvb-apps utilities are now always built when the dvb-apps
+	  package is selected.
+
+config BR2_KERNEL_HEADERS_SNAP
+	bool "Local Linux snapshot support removed"
+	select BR2_LEGACY
+	help
+	  Support for using a custom snapshot to install the Linux
+	  kernel headers has been removed.
+
+config BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV
+	bool "/dev management by udev removed"
+	select BR2_LEGACY
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  Therefore, if you are not using 'systemd' as init system, you
+	  must choose 'Dynamic using eudev' in the '/dev management'
+	  menu to get the same behaviour as in your old configuration.
+
+	  If you are using 'systemd', its internal implementation of
+	  'udev' will be used automatically.
+
+	  You must also check the packages depending on 'udev' are still
+	  selected.
+
+config BR2_PACKAGE_UDEV
+	bool "udev is now a virtual package"
+	select BR2_LEGACY
+	select BR2_PACKAGE_HAS_UDEV
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  Your old configuration refers to packages depending on 'udev',
+	  either for build or at runtime.
+
+	  Check that a 'udev' provider is selected. If you are not using
+	  'systemd' as init system, 'eudev' should be selected, which is
+	  the case if '/dev management' is set to 'Dynamic using eudev'.
+
+	  If you are using 'systemd', its internal implementation of 'udev'
+	  is used.
+
+config BR2_PACKAGE_UDEV_RULES_GEN
+	bool "udev rules generation handled by provider"
+	select BR2_LEGACY
+	select BR2_PACKAGE_EUDEV if !BR2_INIT_SYSTEMD
+	select BR2_PACKAGE_EUDEV_RULES_GEN if !BR2_INIT_SYSTEMD
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  If you are not using 'systemd' as init system, udev rules
+	  generation will be handled by 'eudev'. Check that
+	  '/dev management' is set to 'Dynamic using eudev' to get
+	  the same behaviour as in your old configuration.
+
+	  If you are using 'systemd', it internal implementation of 'udev'
+	  will generate the rules.
+
+config BR2_PACKAGE_UDEV_ALL_EXTRAS
+	bool "udev extras removed"
+	select BR2_LEGACY
+	help
+	  The 'udev' package has been converted to a virtual package.
+	  The providers for this feature are: 'eudev', 'systemd'.
+
+	  The option to enable the extra features of 'udev' (gudev, ...)
+	  has been removed. These features are automatically enabled in
+	  the 'udev' providers if the dependencies are selected. For
+	  example, selecting 'libglib2' will trigger the build of gudev.
+
+config BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
+	bool "xlib-libpthread-stubs option has been renamed"
+	depends on BR2_PACKAGE_XORG7
+	select BR2_LEGACY
+	select BR2_PACKAGE_LIBPTHREAD_STUBS
+	help
+	  The pthread stubs neither depend on X11 nor Xlib. Thus the
+	  package has been renamed BR2_PACKAGE_LIBPTHREAD_STUBS
+
 ###############################################################################
 comment "Legacy options removed in 2014.02"
 
@@ -141,17 +789,17 @@ config BR2_KERNEL_HEADERS_3_3
 
 config BR2_KERNEL_HEADERS_3_5
 	bool "kernel headers version 3.5.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_6
+	select BR2_KERNEL_HEADERS_3_9
 	select BR2_LEGACY
 	help
 	  Version 3.5.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.6.x of the headers have been
+	  As an alternative, version 3.8.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_GDB_VERSION_7_2
 	bool "gdb 7.2.x is no longer supported"
-	select BR2_GDB_VERSION_7_5
+	select BR2_GDB_VERSION_7_6
 	select BR2_LEGACY
 	help
 	  Version 7.2.x of gdb has been deprecated for more than four
@@ -160,7 +808,7 @@ config BR2_GDB_VERSION_7_2
 
 config BR2_GDB_VERSION_7_3
 	bool "gdb 7.3.x is no longer supported"
-	select BR2_GDB_VERSION_7_5
+	select BR2_GDB_VERSION_7_6
 	select BR2_LEGACY
 	help
 	  Version 7.3.x of gdb has been deprecated for more than four
@@ -568,11 +1216,10 @@ config BR2_PACKAGE_XSERVER_tinyx
 config BR2_PACKAGE_PTHREAD_STUBS
 	bool "pthread-stubs option has been renamed"
 	select BR2_LEGACY
-	select BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS
-	depends on BR2_PACKAGE_XORG7
+	select BR2_PACKAGE_LIBPTHREAD_STUBS
 	help
 	  For consistency reason, the pthread-stubs package has been
-	  renamed to xlib_libpthread-stubs.
+	  renamed to libpthread-stubs.
 
 ###############################################################################
 comment "Legacy options removed in 2012.08"

Makefile

@@ -24,11 +24,14 @@
 # You shouldn't need to mess with anything beyond this point...
 #--------------------------------------------------------------
 
+# This is our default rule, so must come first
+all:
+
 # Set and export the version string
-export BR2_VERSION:=2014.02-rc3
+export BR2_VERSION := 2015.02-rc2
 
 # Check for minimal make version (note: this check will break at make 10.x)
-MIN_MAKE_VERSION=3.81
+MIN_MAKE_VERSION = 3.81
 ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
 $(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
 endif
@@ -38,45 +41,58 @@ export HOSTARCH := $(shell uname -m | \
 	    -e s/sun4u/sparc64/ \
 	    -e s/arm.*/arm/ \
 	    -e s/sa110/arm/ \
-	    -e s/ppc64/powerpc/ \
+	    -e s/ppc64/powerpc64/ \
 	    -e s/ppc/powerpc/ \
 	    -e s/macppc/powerpc/\
 	    -e s/sh.*/sh/)
 
-# This top-level Makefile can *not* be executed in parallel
+# Parallel execution of this Makefile is disabled because it changes
+# the packages building order, that can be a problem for two reasons:
+# - If a package has an unspecified optional dependency and that
+#   dependency is present when the package is built, it is used,
+#   otherwise it isn't (but compilation happily proceeds) so the end
+#   result will differ if the order is swapped due to parallel
+#   building.
+# - Also changing the building order can be a problem if two packages
+#   manipulate the same file in the target directory.
+#
+# Taking into account the above considerations, if you still want to execute
+# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
+# build using the following command:
+#	make BR2_JLEVEL= -j$((`getconf _NPROCESSORS_ONLN`+1))
 .NOTPARALLEL:
 
 # absolute path
-TOPDIR:=$(shell pwd)
-CONFIG_CONFIG_IN=Config.in
-CONFIG=support/kconfig
-DATE:=$(shell date +%Y%m%d)
+TOPDIR := $(shell pwd)
+CONFIG_CONFIG_IN = Config.in
+CONFIG = support/kconfig
+DATE := $(shell date +%Y%m%d)
 
 # Compute the full local version string so packages can use it as-is
 # Need to export it, so it can be got from environment in children (eg. mconf)
-export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
+export BR2_VERSION_FULL := $(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
 
-noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
+noconfig_targets := menuconfig nconfig gconfig xconfig config oldconfig randconfig \
 	defconfig %_defconfig allyesconfig allnoconfig silentoldconfig release \
 	randpackageconfig allyespackageconfig allnopackageconfig \
 	source-check print-version olddefconfig
 
 # Strip quotes and then whitespaces
-qstrip=$(strip $(subst ",,$(1)))
+qstrip = $(strip $(subst ",,$(1)))
 #"))
 
 # Variables for use in Make constructs
-comma:=,
-empty:=
-space:=$(empty) $(empty)
+comma := ,
+empty :=
+space := $(empty) $(empty)
 
 ifneq ("$(origin O)", "command line")
-O:=output
-CONFIG_DIR:=$(TOPDIR)
-NEED_WRAPPER=
+O := output
+CONFIG_DIR := $(TOPDIR)
+NEED_WRAPPER =
 else
 # other packages might also support Linux-style out of tree builds
-# with the O=<dir> syntax (E.G. Busybox does). As make automatically
+# with the O=<dir> syntax (E.G. BusyBox does). As make automatically
 # forwards command line variable definitions those packages get very
 # confused. Fix this by telling make to not do so
 MAKEOVERRIDES =
@@ -85,18 +101,18 @@ MAKEOVERRIDES =
 # of the origin function (command line -> environment).
 # Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
 # To really make O go away, we have to override it.
-override O:=$(O)
-CONFIG_DIR:=$(O)
+override O := $(O)
+CONFIG_DIR := $(O)
 # we need to pass O= everywhere we call back into the toplevel makefile
 EXTRAMAKEARGS = O=$(O)
-NEED_WRAPPER=y
+NEED_WRAPPER = y
 endif
 
 # bash prints the name of the directory on 'cd <dir>' if CDPATH is
 # set, so unset it here to not cause problems. Notice that the export
 # line doesn't affect the environment of $(shell ..) calls, so
 # explictly throw away any output from 'cd' here.
-export CDPATH:=
+export CDPATH :=
 BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
 $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
 
@@ -107,8 +123,9 @@ $(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
 # On subsequent invocations of make, it is read in. It can still be overridden
 # on the command line, therefore the file is re-created every time make is run.
 #
-# When BR2_EXTERNAL is not set, the .br-external file is removed and we point
-# to support/dummy-external. This makes sure we can unconditionally include the
+# When BR2_EXTERNAL is set to an empty value (e.g. explicitly in command
+# line), the .br-external file is removed and we point to
+# support/dummy-external. This makes sure we can unconditionally include the
 # Config.in and external.mk from the BR2_EXTERNAL directory. In this case,
 # override is necessary so the user can clear BR2_EXTERNAL from the command
 # line, but the dummy path is still used internally.
@@ -136,29 +153,28 @@ endif
 
 # Need that early, before we scan packages
 # Avoids doing the $(or...) everytime
-_BR2_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
+BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
 
-BUILD_DIR:=$(BASE_DIR)/build
-STAMP_DIR:=$(BASE_DIR)/stamps
-BINARIES_DIR:=$(BASE_DIR)/images
-TARGET_DIR:=$(BASE_DIR)/target
+BUILD_DIR := $(BASE_DIR)/build
+BINARIES_DIR := $(BASE_DIR)/images
+TARGET_DIR := $(BASE_DIR)/target
 # initial definition so that 'make clean' works for most users, even without
 # .config. HOST_DIR will be overwritten later when .config is included.
-HOST_DIR:=$(BASE_DIR)/host
+HOST_DIR := $(BASE_DIR)/host
 
-LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
-REDIST_SOURCES_DIR_TARGET=$(LEGAL_INFO_DIR)/sources
-REDIST_SOURCES_DIR_HOST=$(LEGAL_INFO_DIR)/host-sources
-LICENSE_FILES_DIR_TARGET=$(LEGAL_INFO_DIR)/licenses
-LICENSE_FILES_DIR_HOST=$(LEGAL_INFO_DIR)/host-licenses
-LEGAL_MANIFEST_CSV_TARGET=$(LEGAL_INFO_DIR)/manifest.csv
-LEGAL_MANIFEST_CSV_HOST=$(LEGAL_INFO_DIR)/host-manifest.csv
-LEGAL_LICENSES_TXT_TARGET=$(LEGAL_INFO_DIR)/licenses.txt
-LEGAL_LICENSES_TXT_HOST=$(LEGAL_INFO_DIR)/host-licenses.txt
-LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
-LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
+LEGAL_INFO_DIR = $(BASE_DIR)/legal-info
+REDIST_SOURCES_DIR_TARGET = $(LEGAL_INFO_DIR)/sources
+REDIST_SOURCES_DIR_HOST = $(LEGAL_INFO_DIR)/host-sources
+LICENSE_FILES_DIR_TARGET = $(LEGAL_INFO_DIR)/licenses
+LICENSE_FILES_DIR_HOST = $(LEGAL_INFO_DIR)/host-licenses
+LEGAL_MANIFEST_CSV_TARGET = $(LEGAL_INFO_DIR)/manifest.csv
+LEGAL_MANIFEST_CSV_HOST = $(LEGAL_INFO_DIR)/host-manifest.csv
+LEGAL_LICENSES_TXT_TARGET = $(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_LICENSES_TXT_HOST = $(LEGAL_INFO_DIR)/host-licenses.txt
+LEGAL_WARNINGS = $(LEGAL_INFO_DIR)/.warnings
+LEGAL_REPORT = $(LEGAL_INFO_DIR)/README
 
-BR2_CONFIG=$(CONFIG_DIR)/.config
+BR2_CONFIG = $(CONFIG_DIR)/.config
 
 # Pull in the user's configuration file
 ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
@@ -169,85 +185,86 @@ endif
 # Use 'make V=1' to see the full commands
 ifdef V
   ifeq ("$(origin V)", "command line")
-    KBUILD_VERBOSE=$(V)
+    KBUILD_VERBOSE = $(V)
   endif
 endif
 ifndef KBUILD_VERBOSE
-  KBUILD_VERBOSE=0
+  KBUILD_VERBOSE = 0
 endif
 
 ifeq ($(KBUILD_VERBOSE),1)
-  quiet=
-  Q=
+  quiet =
+  Q =
 ifndef VERBOSE
-  VERBOSE=1
+  VERBOSE = 1
 endif
 else
-  quiet=quiet_
-  Q=@
+  quiet = quiet_
+  Q = @
 endif
 
 # we want bash as shell
-SHELL:=$(shell if [ -x "$$BASH" ]; then echo $$BASH; \
-	else if [ -x /bin/bash ]; then echo /bin/bash; \
-	else echo sh; fi; fi)
+SHELL := $(shell if [ -x "$$BASH" ]; then echo $$BASH; \
+	 else if [ -x /bin/bash ]; then echo /bin/bash; \
+	 else echo sh; fi; fi)
 
 # kconfig uses CONFIG_SHELL
-CONFIG_SHELL:=$(SHELL)
+CONFIG_SHELL := $(SHELL)
 
 export SHELL CONFIG_SHELL quiet Q KBUILD_VERBOSE VERBOSE
 
 ifndef HOSTAR
-HOSTAR:=ar
+HOSTAR := ar
 endif
 ifndef HOSTAS
-HOSTAS:=as
+HOSTAS := as
 endif
 ifndef HOSTCC
-HOSTCC:=gcc
-HOSTCC:=$(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
+HOSTCC := gcc
+HOSTCC := $(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
 endif
-HOSTCC_NOCCACHE:=$(HOSTCC)
+HOSTCC_NOCCACHE := $(HOSTCC)
 ifndef HOSTCXX
-HOSTCXX:=g++
-HOSTCXX:=$(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
+HOSTCXX := g++
+HOSTCXX := $(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
 endif
-HOSTCXX_NOCCACHE:=$(HOSTCXX)
+HOSTCXX_NOCCACHE := $(HOSTCXX)
 ifndef HOSTFC
-HOSTFC:=gfortran
+HOSTFC := gfortran
 endif
 ifndef HOSTCPP
-HOSTCPP:=cpp
+HOSTCPP := cpp
 endif
 ifndef HOSTLD
-HOSTLD:=ld
+HOSTLD := ld
 endif
 ifndef HOSTLN
-HOSTLN:=ln
+HOSTLN := ln
 endif
 ifndef HOSTNM
-HOSTNM:=nm
+HOSTNM := nm
 endif
 ifndef HOSTOBJCOPY
-HOSTOBJCOPY:=objcopy
+HOSTOBJCOPY := objcopy
 endif
 ifndef HOSTRANLIB
-HOSTRANLIB:=ranlib
+HOSTRANLIB := ranlib
 endif
-HOSTAR:=$(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
-HOSTAS:=$(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
-HOSTFC:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
-HOSTCPP:=$(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
-HOSTLD:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
-HOSTLN:=$(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
-HOSTNM:=$(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
-HOSTOBJCOPY:=$(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
-HOSTRANLIB:=$(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
+HOSTAR := $(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
+HOSTAS := $(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
+HOSTFC := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
+HOSTCPP := $(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
+HOSTLD := $(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
+HOSTLN := $(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
+HOSTNM := $(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
+HOSTOBJCOPY := $(shell which $(HOSTOBJCOPY) || type -p $(HOSTOBJCOPY) || echo objcopy)
+HOSTRANLIB := $(shell which $(HOSTRANLIB) || type -p $(HOSTRANLIB) || echo ranlib)
 
 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
 export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
 
 # Make sure pkg-config doesn't look outside the buildroot tree
+HOST_PKG_CONFIG_PATH := $(PKG_CONFIG_PATH)
 unexport PKG_CONFIG_PATH
 unexport PKG_CONFIG_SYSROOT_DIR
 unexport PKG_CONFIG_LIBDIR
@@ -259,6 +276,9 @@ unexport DESTDIR
 # Causes breakage with packages that needs host-ruby
 unexport RUBYOPT
 
+include package/pkg-utils.mk
+include package/doc-asciidoc.mk
+
 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 ################################################################################
@@ -278,27 +298,19 @@ unexport TAR_OPTIONS
 unexport CONFIG_SITE
 unexport QMAKESPEC
 unexport TERMINFO
+unexport MACHINE
 
-GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
+GNU_HOST_NAME := $(shell support/gnuconfig/config.guess)
 
-################################################################################
-#
-# The list of stuff to build for the target toolchain
-# along with the packages to build for the target.
-#
-################################################################################
-
-BASE_TARGETS = toolchain
-
-TARGETS:=
+TARGETS :=
 
 # silent mode requested?
-QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
+QUIET := $(if $(findstring s,$(filter-out --%,$(MAKEFLAGS))),-q)
 
 # Strip off the annoying quoting
-ARCH:=$(call qstrip,$(BR2_ARCH))
+ARCH := $(call qstrip,$(BR2_ARCH))
 
-KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
+KERNEL_ARCH := $(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/i.86/i386/ -e s/sun4u/sparc64/ \
 	-e s/arcle/arc/ \
 	-e s/arceb/arc/ \
@@ -306,32 +318,33 @@ KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
 	-e s/aarch64/arm64/ \
 	-e s/bfin/blackfin/ \
 	-e s/parisc64/parisc/ \
-	-e s/powerpc64/powerpc/ \
+	-e s/powerpc64.*/powerpc/ \
 	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
-	-e s/sh.*/sh/)
+	-e s/sh.*/sh/ \
+	-e s/microblazeel/microblaze/)
 
-ZCAT:=$(call qstrip,$(BR2_ZCAT))
-BZCAT:=$(call qstrip,$(BR2_BZCAT))
-XZCAT:=$(call qstrip,$(BR2_XZCAT))
-TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
+ZCAT := $(call qstrip,$(BR2_ZCAT))
+BZCAT := $(call qstrip,$(BR2_BZCAT))
+XZCAT := $(call qstrip,$(BR2_XZCAT))
+TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf
 
 # packages compiled for the host go here
-HOST_DIR:=$(call qstrip,$(BR2_HOST_DIR))
+HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
 
-# locales to generate
-GENERATE_LOCALE=$(call qstrip,$(BR2_GENERATE_LOCALE))
+# Quotes are needed for spaces and all in the original PATH content.
+BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(HOST_DIR)/usr/bin:$(HOST_DIR)/usr/sbin:$(PATH)"
 
-TARGET_SKELETON=$(TOPDIR)/system/skeleton
+TARGET_SKELETON = $(TOPDIR)/system/skeleton
 
 # Location of a file giving a big fat warning that output/target
 # should not be used as the root filesystem.
-TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
+TARGET_DIR_WARNING_FILE = $(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
 
 ifeq ($(BR2_CCACHE),y)
-CCACHE:=$(HOST_DIR)/usr/bin/ccache
+CCACHE := $(HOST_DIR)/usr/bin/ccache
 BR_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
 export BR_CACHE_DIR
-HOSTCC  := $(CCACHE) $(HOSTCC)
+HOSTCC := $(CCACHE) $(HOSTCC)
 HOSTCXX := $(CCACHE) $(HOSTCXX)
 endif
 
@@ -365,12 +378,12 @@ include support/dependencies/dependencies.mk
 # We also need the various per-package makefiles, which also add
 # each selected package to TARGETS if that package was selected
 # in the .config file.
-include toolchain/helpers.mk
+include toolchain/*.mk
 include toolchain/*/*.mk
 
 # Include the package override file if one has been provided in the
 # configuration.
-PACKAGE_OVERRIDE_FILE=$(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
+PACKAGE_OVERRIDE_FILE = $(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
 ifneq ($(PACKAGE_OVERRIDE_FILE),)
 -include $(PACKAGE_OVERRIDE_FILE)
 endif
@@ -380,32 +393,12 @@ include $(sort $(wildcard package/*/*.mk))
 include boot/common.mk
 include linux/linux.mk
 include system/system.mk
+include fs/common.mk
 
 include $(BR2_EXTERNAL)/external.mk
 
-TARGETS+=target-finalize
-
-ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
-TARGETS+=target-purgelocales
-endif
-
-ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
-ifneq ($(GENERATE_LOCALE),)
-TARGETS+=target-generatelocales
-endif
-endif
-
-ifeq ($(BR2_ECLIPSE_REGISTER),y)
-TARGETS+=toolchain-eclipse-register
-endif
-
-include fs/common.mk
-
-TARGETS+=target-post-image
-
-TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS) $(BASE_TARGETS))
-TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
-TARGETS_ALL:=$(patsubst %,__real_tgt_%,$(TARGETS))
+TARGETS_SOURCE := $(patsubst %,%-source,$(TARGETS))
+TARGETS_DIRCLEAN := $(patsubst %,%-dirclean,$(TARGETS))
 
 # host-* dependencies have to be handled specially, as those aren't
 # visible in Kconfig and hence not added to a variable like TARGETS.
@@ -413,7 +406,8 @@ TARGETS_ALL:=$(patsubst %,__real_tgt_%,$(TARGETS))
 # variable for each enabled target.
 # Notice: this only works for newstyle gentargets/autotargets packages
 TARGETS_HOST_DEPS = $(sort $(filter host-%,$(foreach dep,\
-		$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS))),\
+		$(addsuffix _DEPENDENCIES,\
+			$(call UPPERCASE,$(TARGETS) $(TARGETS_ROOTFS))),\
 		$($(dep)))))
 # Host packages can in turn have their own dependencies. Likewise find
 # all the package names listed in the HOST_<PKG>_DEPENDENCIES for each
@@ -425,28 +419,26 @@ HOST_DEPS = $(sort $(foreach dep,\
 		$($(dep))))
 HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
 
-TARGETS_LEGAL_INFO:=$(patsubst %,%-legal-info,\
-		$(TARGETS) $(BASE_TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
-
-# all targets depend on the crosscompiler and it's prerequisites
-$(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) %
+TARGETS_LEGAL_INFO := $(patsubst %,%-legal-info,\
+		$(TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))
 
 dirs: $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
-	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
+	$(HOST_DIR) $(BINARIES_DIR)
 
 $(BUILD_DIR)/buildroot-config/auto.conf: $(BR2_CONFIG)
 	$(MAKE1) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 
 prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 
-world: $(BASE_TARGETS) $(TARGETS_ALL)
+world: target-post-image
 
 .PHONY: all world toolchain dirs clean distclean source outputmakefile \
 	legal-info legal-info-prepare legal-info-clean printvars \
-	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
+	target-finalize target-post-image \
+	$(TARGETS) $(TARGETS_ROOTFS) \
 	$(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
 	$(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
-	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
+	$(HOST_DIR) $(BINARIES_DIR)
 
 ################################################################################
 #
@@ -454,7 +446,7 @@ world: $(BASE_TARGETS) $(TARGETS_ALL)
 # dependencies anywhere else
 #
 ################################################################################
-$(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
+$(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
 	@mkdir -p $@
 
 # We make a symlink lib32->lib or lib64->lib as appropriate
@@ -476,7 +468,7 @@ $(STAGING_DIR):
 	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
 
 ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
-TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
+TARGET_SKELETON = $(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
 endif
 
 RSYNC_VCS_EXCLUSIONS = \
@@ -501,9 +493,78 @@ ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
 STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
 endif
 STRIP_FIND_CMD += -type f \( -perm /111 -o -name '*.so*' \)
-STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
+# file exclusions:
+# - libpthread.so: a non-stripped libpthread shared library is needed for
+#   proper debugging of pthread programs using gdb.
+# - kernel modules (*.ko): do not function properly when stripped like normal
+#   applications and libraries. Normally kernel modules are already excluded
+#   by the executable permission check above, so the explicit exclusion is only
+#   done for kernel modules with incorrect permissions.
+STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* *.ko $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
 
-target-finalize:
+ifeq ($(BR2_ECLIPSE_REGISTER),y)
+define TOOLCHAIN_ECLIPSE_REGISTER
+	./support/scripts/eclipse-register-toolchain `readlink -f $(O)` \
+		$(notdir $(TARGET_CROSS)) $(BR2_ARCH)
+endef
+TARGET_FINALIZE_HOOKS += TOOLCHAIN_ECLIPSE_REGISTER
+endif
+
+# Generate locale data. Basically, we call the localedef program
+# (built by the host-localedef package) for each locale. The input
+# data comes preferably from the toolchain, or if the toolchain does
+# not have them (Linaro toolchains), we use the ones available on the
+# host machine.
+ifeq ($(BR2_TOOLCHAIN_USES_GLIBC),y)
+GLIBC_GENERATE_LOCALES = $(call qstrip,$(BR2_GENERATE_LOCALE))
+ifneq ($(GLIBC_GENERATE_LOCALES),)
+TARGETS += host-localedef
+
+define GENERATE_GLIBC_LOCALES
+	$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
+	$(Q)for locale in $(GLIBC_GENERATE_LOCALES) ; do \
+		inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
+		charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
+		if test -z "$${charmap}" ; then \
+			charmap="UTF-8" ; \
+		fi ; \
+		echo "Generating locale $${inputfile}.$${charmap}" ; \
+		I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
+		$(HOST_DIR)/usr/bin/localedef \
+			--prefix=$(TARGET_DIR) \
+			--$(call LOWERCASE,$(BR2_ENDIAN))-endian \
+			-i $${inputfile} -f $${charmap} \
+			$${locale} ; \
+	done
+endef
+TARGET_FINALIZE_HOOKS += GENERATE_GLIBC_LOCALES
+endif
+endif
+
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+LOCALE_WHITELIST = $(BUILD_DIR)/locales.nopurge
+LOCALE_NOPURGE = $(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
+
+define PURGE_LOCALES
+	rm -f $(LOCALE_WHITELIST)
+	for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done
+
+	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man /usr/lib/locale)); \
+	do \
+		for lang in $$(cd $$dir; ls .|grep -v man); \
+		do \
+			grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
+		done; \
+	done
+endef
+TARGET_FINALIZE_HOOKS += PURGE_LOCALES
+endif
+
+$(TARGETS_ROOTFS): target-finalize
+
+target-finalize: $(TARGETS)
+	@$(call MESSAGE,"Finalizing target directory")
+	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
 		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
@@ -518,13 +579,6 @@ endif
 	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
 	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
 	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
-ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY),y)
-	find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
-endif
-ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
-	find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
-endif
-	rm -rf $(TARGET_DIR)/usr/lib/luarocks
 	$(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
 	if test -d $(TARGET_DIR)/lib/modules; then \
 		find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
@@ -565,58 +619,14 @@ endif
 
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 		$(call MESSAGE,"Executing post-build script $(s)"); \
-		$(USER_HOOKS_EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
+		$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 
-ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
-LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
-LOCALE_NOPURGE=$(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
-
-target-purgelocales:
-	rm -f $(LOCALE_WHITELIST)
-	for i in $(LOCALE_NOPURGE); do echo $$i >> $(LOCALE_WHITELIST); done
-
-	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man /usr/lib/locale)); \
-	do \
-		for lang in $$(cd $$dir; ls .|grep -v man); \
-		do \
-			grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
-		done; \
-	done
-endif
-
-ifneq ($(GENERATE_LOCALE),)
-# Generate locale data. Basically, we call the localedef program
-# (built by the host-localedef package) for each locale. The input
-# data comes preferably from the toolchain, or if the toolchain does
-# not have them (Linaro toolchains), we use the ones available on the
-# host machine.
-target-generatelocales: host-localedef
-	$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
-	$(Q)for locale in $(GENERATE_LOCALE) ; do \
-		inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
-		charmap=`echo $${locale} | cut -f2 -d'.' -s` ; \
-		if test -z "$${charmap}" ; then \
-			charmap="UTF-8" ; \
-		fi ; \
-		echo "Generating locale $${inputfile}.$${charmap}" ; \
-		I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
-		$(HOST_DIR)/usr/bin/localedef \
-			--prefix=$(TARGET_DIR) \
-			--$(call LOWERCASE,$(BR2_ENDIAN))-endian \
-			-i $${inputfile} -f $${charmap} \
-			$${locale} ; \
-	done
-endif
-
-target-post-image:
+target-post-image: $(TARGETS_ROOTFS) target-finalize
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_IMAGE_SCRIPT)), \
 		$(call MESSAGE,"Executing post-image script $(s)"); \
-		$(USER_HOOKS_EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
+		$(EXTRA_ENV) $(s) $(BINARIES_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
 
-toolchain-eclipse-register:
-	./support/scripts/eclipse-register-toolchain `readlink -f $(O)` $(notdir $(TARGET_CROSS)) $(BR2_ARCH)
-
-source: dirs $(TARGETS_SOURCE) $(HOST_SOURCE)
+source: $(TARGETS_SOURCE) $(HOST_SOURCE)
 
 external-deps:
 	@$(MAKE1) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
@@ -627,9 +637,9 @@ legal-info-clean:
 legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call MESSAGE,"Collecting legal info")
 	@$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
-	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,TARGET)
-	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,HOST)
-	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,HOST)
+	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
+	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
+	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
 	@$(call legal-warning,the Buildroot source code has not been saved)
 	@$(call legal-warning,the toolchain has not been saved)
 	@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
@@ -645,24 +655,29 @@ legal-info: dirs legal-info-clean legal-info-prepare $(TARGETS_LEGAL_INFO) \
 	@rm -f $(LEGAL_WARNINGS)
 
 show-targets:
-	@echo $(TARGETS)
+	@echo $(HOST_DEPS) $(TARGETS_HOST_DEPS) $(TARGETS) $(TARGETS_ROOTFS)
 
 graph-build: $(O)/build/build-time.log
 	@install -d $(O)/graphs
 	$(foreach o,name build duration,./support/scripts/graph-build-time \
 					--type=histogram --order=$(o) --input=$(<) \
-					--output=$(O)/graphs/build.hist-$(o).$(_BR2_GRAPH_OUT) \
+					--output=$(O)/graphs/build.hist-$(o).$(BR_GRAPH_OUT) \
 					$(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 	$(foreach t,packages steps,./support/scripts/graph-build-time \
 				   --type=pie-$(t) --input=$(<) \
-				   --output=$(O)/graphs/build.pie-$(t).$(_BR2_GRAPH_OUT) \
+				   --output=$(O)/graphs/build.pie-$(t).$(BR_GRAPH_OUT) \
 				   $(if $(BR2_GRAPH_ALT),--alternate-colors)$(sep))
 
-graph-depends:
+graph-depends-requirements:
+	@dot -? >/dev/null 2>&1 || \
+		{ echo "ERROR: The 'dot' program from Graphviz is needed for graph-depends" >&2; exit 1; }
+
+graph-depends: graph-depends-requirements
 	@$(INSTALL) -d $(O)/graphs
 	@cd "$(CONFIG_DIR)"; \
-	$(TOPDIR)/support/scripts/graph-depends \
-	|dot -T$(_BR2_GRAPH_OUT) -o $(O)/graphs/$(@).$(_BR2_GRAPH_OUT)
+	$(TOPDIR)/support/scripts/graph-depends $(BR2_GRAPH_DEPS_OPTS) \
+	|tee $(BASE_DIR)/graphs/$(@).dot \
+	|dot $(BR2_GRAPH_DOT_OPTS) -T$(BR_GRAPH_OUT) -o $(BASE_DIR)/graphs/$(@).$(BR_GRAPH_OUT)
 
 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
@@ -673,12 +688,13 @@ endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 # configuration
 # ---------------------------------------------------------------------------
 
-HOSTCFLAGS=$(CFLAGS_FOR_BUILD)
+HOSTCFLAGS = $(CFLAGS_FOR_BUILD)
 export HOSTCFLAGS
 
 $(BUILD_DIR)/buildroot-config/%onf:
 	mkdir -p $(@D)/lxdialog
-	$(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
+	PKG_CONFIG_PATH="$(HOST_PKG_CONFIG_PATH)" $(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" \
+	    obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
 
 DEFCONFIG = $(call qstrip,$(BR2_DEFCONFIG))
 
@@ -770,13 +786,16 @@ defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
 	@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(DEFCONFIG),=$(DEFCONFIG)) $(CONFIG_CONFIG_IN)
 
+# Override the BR2_DEFCONFIG from COMMON_CONFIG_ENV with the new defconfig
 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@$(COMMON_CONFIG_ENV) $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
+	@$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(TOPDIR)/configs/$@ \
+		$< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
 
 %_defconfig: $(BUILD_DIR)/buildroot-config/conf $(BR2_EXTERNAL)/configs/%_defconfig outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
-	@$(COMMON_CONFIG_ENV) $< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
+	@$(COMMON_CONFIG_ENV) BR2_DEFCONFIG=$(BR2_EXTERNAL)/configs/$@ \
+		$< --defconfig=$(BR2_EXTERNAL)/configs/$@ $(CONFIG_CONFIG_IN)
 
 savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
 	@mkdir -p $(BUILD_DIR)/buildroot-config
@@ -814,7 +833,7 @@ printvars:
 
 clean:
 	rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
-		$(STAMP_DIR) $(BUILD_DIR) $(BASE_DIR)/staging \
+		$(BUILD_DIR) $(BASE_DIR)/staging \
 		$(LEGAL_INFO_DIR)
 
 distclean: clean
@@ -834,9 +853,6 @@ help:
 	@echo 'Build:'
 	@echo '  all                    - make world'
 	@echo '  toolchain              - build toolchain'
-	@echo '  <package>-rebuild      - force recompile <package>'
-	@echo '  <package>-reconfigure  - force reconfigure <package>'
-	@echo '  <package>-graph-depends    - generate graph of the dependency tree for package'
 	@echo
 	@echo 'Configuration:'
 	@echo '  menuconfig             - interactive curses-based configurator'
@@ -849,7 +865,7 @@ help:
 	@echo '  randconfig             - New config with random answer to all options'
 	@echo '  defconfig              - New config with default answer to all options'
 	@echo '                             BR2_DEFCONFIG, if set, is used as input'
-	@echo '  savedefconfig          - Save current config as ./defconfig (minimal config)'
+	@echo '  savedefconfig          - Save current config to BR2_DEFCONFIG (minimal config)'
 	@echo '  allyesconfig           - New config where all options are accepted with yes'
 	@echo '  allnoconfig            - New config where all options are answered with no'
 	@echo '  randpackageconfig      - New config with random answer to package options'
@@ -899,10 +915,11 @@ ifneq ($(wildcard $(BR2_EXTERNAL)/configs/*_defconfig),)
 	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
 endif
 	@echo
-	@echo 'See docs/README, or generate the Buildroot manual for further details'
+	@echo 'For further details, see README, generate the Buildroot manual, or consult'
+	@echo 'it on-line at http://buildroot.org/docs.html'
 	@echo
 
-release: OUT=buildroot-$(BR2_VERSION)
+release: OUT = buildroot-$(BR2_VERSION)
 
 # Create release tarballs. We need to fiddle a bit to add the generated
 # documentation to the git output
@@ -918,5 +935,6 @@ print-version:
 	@echo $(BR2_VERSION_FULL)
 
 include docs/manual/manual.mk
+-include $(BR2_EXTERNAL)/docs/*/*.mk
 
 .PHONY: $(noconfig_targets)

arch/Config.in

@@ -56,6 +56,12 @@ config BR2_aarch64
 config BR2_avr32
 	bool "AVR32"
 	select BR2_SOFT_FLOAT
+	# This architecture is obsolete and complicated to maintain to
+	# do the lack of upstream support in the major toolchain
+	# components. If you're interested by AVR32, contact the
+	# Buildroot community. Otherwise, its support will be removed
+	# by the 2015.02 release.
+	depends on BR2_DEPRECATED_SINCE_2014_08
 	help
 	  The AVR32 is a 32-bit RISC microprocessor architecture designed by
 	  Atmel.
@@ -140,6 +146,25 @@ config BR2_powerpc
 	bool "PowerPC"
 	help
 	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  Big endian.
+	  http://www.power.org/
+	  http://en.wikipedia.org/wiki/Powerpc
+
+config BR2_powerpc64
+	bool "PowerPC64 (big endian)"
+	select BR2_ARCH_IS_64
+	help
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  Big endian.
+	  http://www.power.org/
+	  http://en.wikipedia.org/wiki/Powerpc
+
+config BR2_powerpc64le
+	bool "PowerPC64 (little endian)"
+	select BR2_ARCH_IS_64
+	help
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  Little endian.
 	  http://www.power.org/
 	  http://en.wikipedia.org/wiki/Powerpc
 
@@ -192,9 +217,6 @@ config BR2_ARCH
 config BR2_ENDIAN
 	string
 
-config BR2_GCC_TARGET_TUNE
-	string
-
 config BR2_GCC_TARGET_ARCH
 	string
 
@@ -225,15 +247,25 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	string
 
+# If the architecture has atomic operations, select this:
+config BR2_ARCH_HAS_ATOMICS
+	bool
+
+# Must be selected by binary formats that support shared libraries.
+config BR2_BINFMT_SUPPORTS_SHARED
+	bool
+
 # Set up target binary format
 choice
 	prompt "Target Binary Format"
-	depends on BR2_bfin || BR2_m68k
-	default BR2_BINFMT_FDPIC
+	default BR2_BINFMT_ELF if !(BR2_bfin || BR2_m68k)
+	default BR2_BINFMT_FDPIC if BR2_bfin
+	default BR2_BINFMT_FLAT if BR2_m68k
 
 config BR2_BINFMT_ELF
 	bool "ELF"
 	depends on !BR2_bfin && !BR2_m68k
+	select BR2_BINFMT_SUPPORTS_SHARED
 	help
 	  ELF (Executable and Linkable Format) is a format for libraries and
 	  executables used across different architectures and operating
@@ -241,7 +273,8 @@ config BR2_BINFMT_ELF
 
 config BR2_BINFMT_FDPIC
 	bool "FDPIC"
-	depends on BR2_bfin || BR2_m68k
+	depends on BR2_bfin
+	select BR2_BINFMT_SUPPORTS_SHARED
 	help
 	  ELF FDPIC binaries are based on ELF, but allow the individual load
 	  segments of a binary to be located in memory independently of each
@@ -251,7 +284,6 @@ config BR2_BINFMT_FDPIC
 config BR2_BINFMT_FLAT
 	bool "FLAT"
 	depends on BR2_bfin || BR2_m68k
-	select BR2_PREFER_STATIC_LIB
 	help
 	  FLAT binary is a relatively simple and lightweight executable format
 	  based on the original a.out format. It is widely used in environment
@@ -272,14 +304,13 @@ config BR2_BINFMT_FLAT_ONE
 
 config BR2_BINFMT_FLAT_SEP_DATA
 	bool "Separate data and code region"
-	depends on BR2_bfin || BR2_m68k
 	help
 	  Allow for the data and text segments to be separated and placed in
 	  different regions of memory.
 
 config BR2_BINFMT_FLAT_SHARED
 	bool "Shared binary"
-	depends on BR2_bfin || BR2_m68k
+	select BR2_BINFMT_SUPPORTS_SHARED
 	help
 	  Allow to load and link indiviual FLAT binaries at run time.
 
@@ -321,7 +352,7 @@ if BR2_nios2
 source "arch/Config.in.nios2"
 endif
 
-if BR2_powerpc
+if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif
 

arch/Config.in.aarch64

@@ -3,3 +3,6 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.arc

@@ -1,3 +1,29 @@
+choice
+	prompt "Target CPU"
+	depends on BR2_arc
+	default BR2_arc770d
+	help
+	    Specific CPU to use
+
+config BR2_arc750d
+	bool "ARC 750D"
+
+config BR2_arc770d
+	bool "ARC 770D"
+
+config BR2_archs38
+	bool "ARC HS38"
+
+endchoice
+
+# Choice of atomic instructions presence
+config BR2_ARC_ATOMIC_EXT
+	bool "Atomic extension (LLOCK/SCOND instructions)"
+	default y if BR2_arc770d || BR2_archs38
+
+config BR2_ARCH_HAS_ATOMICS
+	default y if BR2_ARC_ATOMIC_EXT
+
 config BR2_ARCH
 	default "arc"	if BR2_arcle
 	default "arceb"	if BR2_arceb
@@ -11,4 +37,6 @@ config BR2_ENDIAN
 	default "BIG"	 if BR2_arceb
 
 config BR2_GCC_TARGET_CPU
-	default "arc700"
+	default "arc700" if BR2_arc750d
+	default "arc700" if BR2_arc770d
+	default "archs"	 if BR2_archs38

arch/Config.in.arm

@@ -31,12 +31,27 @@ config BR2_ARM_CPU_HAS_VFPV4
 	bool
 	select BR2_ARM_CPU_HAS_VFPV3
 
+config BR2_ARM_CPU_HAS_ARM
+	bool
+
 config BR2_ARM_CPU_HAS_THUMB
 	bool
 
 config BR2_ARM_CPU_HAS_THUMB2
 	bool
 
+config BR2_ARM_CPU_ARMV4
+	bool
+
+config BR2_ARM_CPU_ARMV5
+	bool
+
+config BR2_ARM_CPU_ARMV6
+	bool
+
+config BR2_ARM_CPU_ARMV7A
+	bool
+
 choice
 	prompt "Target Architecture Variant"
 	depends on BR2_arm || BR2_armeb
@@ -44,83 +59,105 @@ choice
 	help
 	  Specific CPU variant to use
 
-config BR2_arm7tdmi
-	bool "arm7tdmi"
-	select BR2_ARM_CPU_HAS_THUMB
-config BR2_arm720t
-	bool "arm720t"
-	select BR2_ARM_CPU_HAS_THUMB
 config BR2_arm920t
 	bool "arm920t"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV4
 config BR2_arm922t
 	bool "arm922t"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV4
 config BR2_arm926t
 	bool "arm926t"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_MAYBE_HAS_VFPV2
 	select BR2_ARM_CPU_HAS_THUMB
-config BR2_arm10t
-	bool "arm10t"
-	select BR2_ARM_CPU_HAS_THUMB
-config BR2_arm1136jf_s_r0
-	bool "arm1136jf_s rev0"
-	select BR2_ARM_CPU_HAS_VFPV2
-	select BR2_ARM_CPU_HAS_THUMB
-config BR2_arm1136jf_s_r1
-	bool "arm1136jf_s rev1"
+	select BR2_ARM_CPU_ARMV5
+config BR2_arm1136jf_s
+	bool "arm1136jf-s"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_VFPV2
 	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV6
 config BR2_arm1176jz_s
 	bool "arm1176jz-s"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV6
 config BR2_arm1176jzf_s
 	bool "arm1176jzf-s"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_VFPV2
 	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV6
 config BR2_cortex_a5
 	bool "cortex-A5"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_MAYBE_HAS_NEON
 	select BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	select BR2_ARM_CPU_HAS_THUMB2
+	select BR2_ARM_CPU_ARMV7A
 config BR2_cortex_a7
 	bool "cortex-A7"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_NEON
 	select BR2_ARM_CPU_HAS_VFPV4
 	select BR2_ARM_CPU_HAS_THUMB2
+	select BR2_ARM_CPU_ARMV7A
 config BR2_cortex_a8
 	bool "cortex-A8"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_NEON
 	select BR2_ARM_CPU_HAS_VFPV3
 	select BR2_ARM_CPU_HAS_THUMB2
+	select BR2_ARM_CPU_ARMV7A
 config BR2_cortex_a9
 	bool "cortex-A9"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_MAYBE_HAS_NEON
 	select BR2_ARM_CPU_MAYBE_HAS_VFPV3
 	select BR2_ARM_CPU_HAS_THUMB2
-config BR2_cortex_a15
-	bool "cortex-A15"
+	select BR2_ARM_CPU_ARMV7A
+config BR2_cortex_a12
+	bool "cortex-A12"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_NEON
 	select BR2_ARM_CPU_HAS_VFPV4
 	select BR2_ARM_CPU_HAS_THUMB2
+	select BR2_ARM_CPU_ARMV7A
+config BR2_cortex_a15
+	bool "cortex-A15"
+	select BR2_ARM_CPU_HAS_ARM
+	select BR2_ARM_CPU_HAS_NEON
+	select BR2_ARM_CPU_HAS_VFPV4
+	select BR2_ARM_CPU_HAS_THUMB2
+	select BR2_ARM_CPU_ARMV7A
 config BR2_fa526
 	bool "fa526/626"
+	select BR2_ARM_CPU_HAS_ARM
+	select BR2_ARM_CPU_ARMV4
 config BR2_pj4
 	bool "pj4"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_VFPV3
+	select BR2_ARM_CPU_ARMV7A
 config BR2_strongarm
 	bool "strongarm sa110/sa1100"
+	select BR2_ARM_CPU_HAS_ARM
+	select BR2_ARM_CPU_ARMV4
 config BR2_xscale
 	bool "xscale"
+	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV5
 config BR2_iwmmxt
 	bool "iwmmxt"
+	select BR2_ARM_CPU_HAS_ARM
+	select BR2_ARM_CPU_ARMV5
 endchoice
 
-config BR2_arm1136jf_s
-	bool
-	default BR2_arm1136jf_s_r0 || BR2_arm1136jf_s_r1
-
 choice
 	prompt "Target ABI"
 	depends on BR2_arm || BR2_armeb
@@ -301,10 +338,10 @@ endchoice
 
 choice
 	prompt "ARM instruction set"
-	depends on BR2_ARM_CPU_HAS_THUMB || BR2_ARM_CPU_HAS_THUMB2
 
-config BR2_ARM_INSTRUCTIONS_ARM_CHOICE
+config BR2_ARM_INSTRUCTIONS_ARM
 	bool "ARM"
+	depends on BR2_ARM_CPU_HAS_ARM
 	help
 	  This option instructs the compiler to generate regular ARM
 	  instructions, that are all 32 bits wide.
@@ -329,10 +366,6 @@ config BR2_ARM_INSTRUCTIONS_THUMB2
 
 endchoice
 
-config BR2_ARM_INSTRUCTIONS_ARM
-	def_bool y
-	depends on !(BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2)
-
 config BR2_ARCH
 	default "arm"	if BR2_arm
 	default "armeb"	if BR2_armeb
@@ -341,11 +374,10 @@ config BR2_ENDIAN
 	default "LITTLE" if BR2_arm
 	default "BIG"	 if BR2_armeb
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
-	default "arm7tdmi"	if BR2_arm7tdmi
-	default "arm7tdmi"	if BR2_arm720t
-	default "arm7tdmi"	if BR2_arm740t
-	default "arm920"	if BR2_arm920
 	default "arm920t"	if BR2_arm920t
 	default "arm922t"	if BR2_arm922t
 	default "arm926ej-s"	if BR2_arm926t
@@ -357,6 +389,7 @@ config BR2_GCC_TARGET_CPU
 	default "cortex-a7"	if BR2_cortex_a7
 	default "cortex-a8"	if BR2_cortex_a8
 	default "cortex-a9"	if BR2_cortex_a9
+	default "cortex-a12"	if BR2_cortex_a12
 	default "cortex-a15"	if BR2_cortex_a15
 	default "fa526"		if BR2_fa526
 	default "marvell-pj4"	if BR2_pj4
@@ -364,28 +397,6 @@ config BR2_GCC_TARGET_CPU
 	default "xscale"	if BR2_xscale
 	default "iwmmxt"	if BR2_iwmmxt
 
-config BR2_GCC_TARGET_ARCH
-	default "armv4t"	if BR2_arm7tdmi
-	default "armv4t"	if BR2_arm720t
-	default "armv4t"	if BR2_arm920t
-	default "armv4t"	if BR2_arm922t
-	default "armv5te"	if BR2_arm926t
-	default "armv5t"	if BR2_arm10t
-	default "armv6j"	if BR2_arm1136jf_s_r0
-	default "armv6k"	if BR2_arm1136jf_s_r1
-	default "armv6zk"	if BR2_arm1176jz_s
-	default "armv6zk"	if BR2_arm1176jzf_s
-	default "armv7-a"	if BR2_cortex_a5
-	default "armv7-a"	if BR2_cortex_a7
-	default "armv7-a"	if BR2_cortex_a8
-	default "armv7-a"	if BR2_cortex_a9
-	default "armv7-a"	if BR2_cortex_a15
-	default "armv4"		if BR2_fa526
-	default "armv7-a"	if BR2_pj4
-	default "armv4"		if BR2_strongarm
-	default "armv5te"	if BR2_xscale
-	default "iwmmxt"	if BR2_iwmmxt
-
 config BR2_GCC_TARGET_ABI
 	default "aapcs-linux"
 

arch/Config.in.avr32

@@ -6,3 +6,6 @@ config BR2_ENDIAN
 
 config BR2_GCC_TARGET_ARCH
 	default "ap"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.bfin

@@ -68,6 +68,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
 	default bf606		if BR2_bf606
 	default bf607		if BR2_bf607

arch/Config.in.m68k

@@ -4,13 +4,8 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "BIG"
 
-config BR2_GCC_TARGET_TUNE
-	default "68000"		if BR2_m68k_68000
-	default "68010"		if BR2_m68k_68010
-	default "68020"		if BR2_m68k_68020
-	default "68030"		if BR2_m68k_68030
-	default "68040"		if BR2_m68k_68040
-	default "68060"		if BR2_m68k_68060
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
 config BR2_GCC_TARGET_ARCH
 	default "68000"		if BR2_m68k_68000

arch/Config.in.microblaze

@@ -1,5 +1,6 @@
 config BR2_ARCH
-	default "microblaze"
+	default "microblazeel"  if BR2_microblazeel
+	default "microblaze"    if BR2_microblazebe
 
 config BR2_ENDIAN
 	default "LITTLE" if BR2_microblazeel
@@ -8,3 +9,6 @@ config BR2_ENDIAN
 config BR2_microblaze
 	bool
 	default y if BR2_microblazeel || BR2_microblazebe
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.mips

@@ -9,18 +9,6 @@ choice
 	  64bit cabable: 3, 4, 64, 64r2
 	  non-64bit capable: 1, 2, 32, 32r2
 
-config BR2_mips_1
-	bool "mips I (generic)"
-	depends on !BR2_ARCH_IS_64 && BR2_DEPRECATED_SINCE_2013_11
-config BR2_mips_2
-	bool "mips II"
-	depends on !BR2_ARCH_IS_64 && BR2_DEPRECATED_SINCE_2013_11
-config BR2_mips_3
-	bool "mips III"
-	depends on BR2_DEPRECATED_SINCE_2013_11
-config BR2_mips_4
-	bool "mips IV"
-	depends on BR2_DEPRECATED_SINCE_2013_11
 config BR2_mips_32
 	bool "mips 32"
 	depends on !BR2_ARCH_IS_64
@@ -38,15 +26,12 @@ endchoice
 
 choice
 	prompt "Target ABI"
-	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
-	default BR2_MIPS_OABI32 if !BR2_ARCH_IS_64
-	default BR2_MIPS_NABI32 if BR2_ARCH_IS_64
+	depends on BR2_mips64 || BR2_mips64el
+	default BR2_MIPS_NABI32
 
 	help
 	  Application Binary Interface to use
 
-config BR2_MIPS_OABI32
-	bool "o32"
 config BR2_MIPS_NABI32
 	bool "n32"
 	depends on BR2_ARCH_IS_64
@@ -76,6 +61,9 @@ config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
 	default "BIG" 	    	if BR2_mips || BR2_mips64
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_ARCH
 	default "mips1"		if BR2_mips_1
 	default "mips2"		if BR2_mips_2
@@ -86,6 +74,10 @@ config BR2_GCC_TARGET_ARCH
 	default "mips64"	if BR2_mips_64
 	default "mips64r2"	if BR2_mips_64r2
 
+config BR2_MIPS_OABI32
+	bool
+	default y		if BR2_mips || BR2_mipsel
+
 config BR2_GCC_TARGET_ABI
 	default "32"		if BR2_MIPS_OABI32
 	default "n32"		if BR2_MIPS_NABI32

arch/Config.in.nios2

@@ -3,3 +3,6 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.powerpc

@@ -1,6 +1,11 @@
+config BR2_POWERPC_CPU_HAS_ALTIVEC
+	bool
+
+config BR2_POWERPC_CPU_HAS_SPE
+	bool
+
 choice
 	prompt "Target Architecture Variant"
-	depends on BR2_powerpc
 	default BR2_generic_powerpc
 	help
 	  Specific CPU variant to use
@@ -8,84 +13,137 @@ config BR2_generic_powerpc
 	bool "generic"
 config BR2_powerpc_401
 	bool "401"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_403
 	bool "403"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_405
 	bool "405"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_405fp
 	bool "405 with FPU"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_440
 	bool "440"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_440fp
 	bool "440 with FPU"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_464
 	bool "464"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_464fp
 	bool "464 with FPU"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_476
 	bool "476"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_476fp
 	bool "476 with FPU"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_505
 	bool "505"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_601
 	bool "601"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_602
 	bool "602"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_603
 	bool "603"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_603e
 	bool "603e"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_604
 	bool "604"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_604e
 	bool "604e"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_620
 	bool "620"
 config BR2_powerpc_630
 	bool "630"
 config BR2_powerpc_740
 	bool "740"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_7400
 	bool "7400"
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_7450
 	bool "7450"
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_750
 	bool "750"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_821
 	bool "821"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_823
 	bool "823"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_860
 	bool "860"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_970
 	bool "970"
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
 config BR2_powerpc_8540
 	bool "8540 / e500v1"
+	depends on !BR2_ARCH_IS_64
+	select BR2_POWERPC_CPU_HAS_SPE
 config BR2_powerpc_8548
 	bool "8548 / e500v2"
+	depends on !BR2_ARCH_IS_64
+	select BR2_POWERPC_CPU_HAS_SPE
 config BR2_powerpc_e300c2
 	bool "e300c2"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_e300c3
 	bool "e300c3"
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_e500mc
 	bool "e500mc"
+	depends on !BR2_ARCH_IS_64
+config BR2_powerpc_e5500
+	bool "e5500"
+	depends on !BR2_powerpc64le
+config BR2_powerpc_e6500
+	bool "e6500"
+	depends on !BR2_powerpc64le
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
+config BR2_powerpc_power4
+	bool "power4"
+config BR2_powerpc_power5
+	bool "power5"
+config BR2_powerpc_power6
+	bool "power6"
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
+config BR2_powerpc_power7
+	bool "power7"
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
+config BR2_powerpc_power8
+	bool "power8"
+	select BR2_POWERPC_CPU_HAS_ALTIVEC
 endchoice
 
 choice
 	prompt "Target ABI"
-	depends on BR2_powerpc
-	default BR2_powerpc_SPE if BR2_powerpc_8540 || BR2_powerpc_8548
+	default BR2_powerpc_SPE if BR2_POWERPC_CPU_HAS_SPE
 	default BR2_powerpc_CLASSIC
 	help
 	  Application Binary Interface to use
 
 config BR2_powerpc_CLASSIC
 	bool "Classic"
-	depends on !(BR2_powerpc_8540 || BR2_powerpc_8548)
+	depends on !BR2_POWERPC_CPU_HAS_SPE
 config BR2_powerpc_SPE
 	bool "SPE"
-	depends on BR2_powerpc_8540 || BR2_powerpc_8548
+	depends on BR2_POWERPC_CPU_HAS_SPE
 endchoice
 
 config BR2_POWERPC_SOFT_FLOAT
@@ -99,11 +157,17 @@ config BR2_POWERPC_SOFT_FLOAT
 
 config BR2_ARCH
 	default "powerpc"	if BR2_powerpc
+	default "powerpc64"	if BR2_powerpc64
+	default "powerpc64le"	if BR2_powerpc64le
 
 config BR2_ENDIAN
-	default "BIG"
+	default "BIG"    if BR2_powerpc || BR2_powerpc64
+	default "LITTLE" if BR2_powerpc64le
 
-config BR2_GCC_TARGET_TUNE
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
+config BR2_GCC_TARGET_CPU
 	default "401"		if BR2_powerpc_401
 	default "403"		if BR2_powerpc_403
 	default "405"		if BR2_powerpc_405
@@ -136,6 +200,11 @@ config BR2_GCC_TARGET_TUNE
 	default "e300c2"	if BR2_powerpc_e300c2
 	default "e300c3"	if BR2_powerpc_e300c3
 	default "e500mc"	if BR2_powerpc_e500mc
+	default "power4"	if BR2_powerpc_power4
+	default "power5"	if BR2_powerpc_power5
+	default "power6"	if BR2_powerpc_power6
+	default "power7"	if BR2_powerpc_power7
+	default "power8"	if BR2_powerpc_power8
 
 config BR2_GCC_TARGET_ABI
 	default "altivec"		if BR2_PPC_ABI_altivec

arch/Config.in.sh

@@ -28,3 +28,6 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"	if BR2_sh4 || BR2_sh4a || BR2_sh64
 	default "BIG"		if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.sparc

@@ -7,14 +7,8 @@ choice
 
 config BR2_sparc_v8
 	bool "v8"
-config BR2_sparc_sparchfleon
-	bool "hfleon"
-config BR2_sparc_sparchfleonv8
-	bool "hfleonv8"
-config BR2_sparc_sparcsfleon
-	bool "sfleon"
-config BR2_sparc_sparcsfleonv8
-	bool "sfleonv8"
+config BR2_sparc_leon3
+	bool "leon3"
 endchoice
 
 config BR2_ARCH
@@ -23,11 +17,9 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "BIG"
 
-config BR2_GCC_TARGET_TUNE
-	default "v8"		if BR2_sparc_v8
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
 config BR2_GCC_TARGET_CPU
-	default "sparchfleon"	if BR2_sparc_sparchfleon
-	default "sparchfleonv8"	if BR2_sparc_sparchfleonv8
-	default "sparcsfleon"	if BR2_sparc_sparcsfleon
-	default "sparcsfleonv8"	if BR2_sparc_sparcsfleonv8
+	default "leon3"		if BR2_sparc_leon3
+	default "v8"		if BR2_sparc_v8

arch/Config.in.x86

@@ -18,12 +18,9 @@ choice
 	prompt "Target Architecture Variant"
 	depends on BR2_i386 || BR2_x86_64
 	default BR2_x86_i586 if BR2_i386
-	default BR2_x86_generic if BR2_x86_64
 	help
 	  Specific CPU variant to use
 
-config BR2_x86_generic
-	bool "generic"
 config BR2_x86_i386
 	bool "i386"
 	depends on !BR2_x86_64
@@ -83,6 +80,15 @@ config BR2_x86_core2
 	select BR2_X86_CPU_HAS_SSE2
 	select BR2_X86_CPU_HAS_SSE3
 	select BR2_X86_CPU_HAS_SSSE3
+config BR2_x86_corei7
+	bool "corei7"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+	select BR2_X86_CPU_HAS_SSE4
+	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_atom
 	bool "atom"
 	select BR2_X86_CPU_HAS_MMX
@@ -177,6 +183,7 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_prescott
 	default "i686"		if BR2_x86_nocona && BR2_i386
 	default "i686"		if BR2_x86_core2 && BR2_i386
+	default "i686"		if BR2_x86_corei7 && BR2_i386
 	default "i686"		if BR2_x86_atom && BR2_i386
 	default "i686"		if BR2_x86_opteron && BR2_i386
 	default "i686"		if BR2_x86_opteron_sse3 && BR2_i386
@@ -187,40 +194,12 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_athlon
 	default "i686"		if BR2_x86_athlon_4
 	default "x86_64"	if BR2_x86_64
-	default "i386"		if BR2_x86_generic
 
 config BR2_ENDIAN
 	default "LITTLE"
 
-config BR2_GCC_TARGET_TUNE
-	default "i386"		if BR2_x86_i386
-	default "i486"		if BR2_x86_i486
-	default "i586"		if BR2_x86_i586
-	default "pentium-mmx"	if BR2_x86_pentium_mmx
-	default "i686"		if BR2_x86_i686
-	default "pentiumpro"	if BR2_x86_pentiumpro
-	default "pentium-m"	if BR2_x86_pentium_m
-	default "pentium2"	if BR2_x86_pentium2
-	default "pentium3"	if BR2_x86_pentium3
-	default "pentium4"	if BR2_x86_pentium4
-	default "prescott"	if BR2_x86_prescott
-	default "nocona"	if BR2_x86_nocona
-	default "core2"		if BR2_x86_core2
-	default "atom"		if BR2_x86_atom
-	default "k8"		if BR2_x86_opteron
-	default "k8-sse3"	if BR2_x86_opteron_sse3
-	default "barcelona"	if BR2_x86_barcelona
-	default "btver2"	if BR2_x86_jaguar
-	default "k6"		if BR2_x86_k6
-	default "k6-2"		if BR2_x86_k6_2
-	default "athlon"	if BR2_x86_athlon
-	default "athlon-4"	if BR2_x86_athlon_4
-	default "winchip-c6"	if BR2_x86_winchip_c6
-	default "winchip2"	if BR2_x86_winchip2
-	default "c3"		if BR2_x86_c3
-	default "c3-2"		if BR2_x86_c32
-	default "geode"		if BR2_x86_geode
-	default "generic"	if BR2_x86_generic
+config BR2_ARCH_HAS_ATOMICS
+	default y if !BR2_x86_i386
 
 config BR2_GCC_TARGET_ARCH
 	default "i386"		if BR2_x86_i386
@@ -236,6 +215,7 @@ config BR2_GCC_TARGET_ARCH
 	default "prescott"	if BR2_x86_prescott
 	default "nocona"	if BR2_x86_nocona
 	default "core2"		if BR2_x86_core2
+	default "corei7"	if BR2_x86_corei7
 	default "atom"		if BR2_x86_atom
 	default "k8"		if BR2_x86_opteron
 	default "k8-sse3"	if BR2_x86_opteron_sse3

arch/Config.in.xtensa

@@ -35,3 +35,6 @@ config BR2_XTENSA_OVERLAY_DIR
 
 config BR2_ARCH
 	default "xtensa"	if BR2_xtensa
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

board/altera/sockit/post-image.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+# post-image.sh for SoCkit
+# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
+# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
+
+# create a DTB file copy with the name expected by the u-boot config
+cp -af $BINARIES_DIR/socfpga_cyclone5_sockit.dtb  $BINARIES_DIR/socfpga.dtb

board/altera/sockit/readme.txt

@@ -0,0 +1,157 @@
+SoCkit
+
+Intro
+=====
+
+This is the buildroot board support for the Arrow SoCkit Evaluation Board.
+
+A good source of information is :
+http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
+
+How it works
+============
+
+Boot process :
+--------------
+
+In summary, the bootloader has multiple stages, an hardcoded boot routine is
+loaded from an on-chip ROM.
+
+  - That first stage is scanning the SD card's partition table to find
+    partition having the 0xA2 type.
+  - This partition is expected to contain a boot image on its first 60 Kb,
+    because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
+    which will load the u-boot image.
+  - Then the u-boot image will load the Linux kernel.
+
+A good source of information for the boot process is :
+http://xillybus.com/tutorials/u-boot-image-altera-soc
+
+Note for the SPL :
+The SPL generated by the u-boot from Rocketboards doesn't seems to work,
+therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
+based on the files generated with the Altera example design.
+
+For more information about this files please look at :
+http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+The altera_sockit_defconfig configuration is a minimal configuration with
+all that is required to bring the SoCkit :
+
+  $ make altera_sockit_defconfig
+
+Build everything
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    ├── rootfs.ext2
+    ├── rootfs.ext3 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── socfpga_cyclone5_sockit.dtb
+    ├── socfpga.dtb
+    ├── u-boot.img
+    ├── u-boot-spl.bin
+    └── uImage
+
+
+Signing the Preloader
+---------------------
+
+*** BEWARE ****
+The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
+This tool comes as a part of the Altera development environnment (SoC EDS).
+A fork of this tool have been done by Maxime Hadjinlian and can be found here :
+https://github.com/maximeh/mkpimage
+
+Remember that without signing the u-boot-spl.bin, the board will not boot !!!
+
+  $ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
+
+Prepare your SDcard
+===================
+
+A good source of information for the partitioning process is :
+http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
+
+Create the SDcard partition table
+----------------------------------
+
+Determine the device associated to the SD card :
+
+  $ cat /proc/partitions
+
+let's assume it is /dev/mmcblk0 :
+
+  $ sudo fdisk /dev/mmcblk0
+
+Delete all previous partitions with 'd' then create the new partition table,
+using these options, pressing enter after each one:
+
+  * n p 1 9000000 +20480K t 1 b
+  * n p 2 4096 +4496384K t 83
+  * n p 3 2048 +1024K t 3 a2
+
+Using the 'p' option, the SD card's partition must look like this :
+
+Device         Boot     Start       End  Blocks  Id System
+/dev/mmcblk0p1        9000000   9041919   20960   b W95 FAT32
+/dev/mmcblk0p2           4096   8996863 4496384  83 Linux
+/dev/mmcblk0p3           2048      4095    1024  a2 Unknown
+
+Then write the partition table using 'w' and exit.
+
+Make partition one a DOS partition :
+
+  $ sudo mkdosfs /dev/mmcblk0p1
+
+Install the binaries to the SDcard
+----------------------------------
+
+Remember your binaries are located in output/images/, go inside that directory :
+
+  $ cd output/images
+
+The partition with type a2 is the partition scan by the first bootloader stage
+in the SoCkit ROM to find the next bootloader stage so we must write the signed
+preloader and the u-boot binaries in that partition :
+
+  $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
+  $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
+
+Copy the Linux kernel and its Device tree :
+
+  $ sudo mkdir /mnt/sdcard
+  $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
+  $ sudo cp socfpga.dtb uImage /mnt/sdcard
+  $ sudo umount /mnt/sdcard
+
+Copy the rootfs :
+
+  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
+  $ sudo sync
+
+It's Done!
+
+Finish
+======
+
+Eject your SDcard, insert it in your SoCkit, and power it up.
+
+if you want a serial console, you can plug a micro B USB cable on the USB-UART
+port, the serial port config to used is 57600/8-N-1.

board/altera/sockit/uboot-sockit-preloader-sample-design.patch

@@ -0,0 +1,820 @@
+From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
+From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+Date: Thu, 20 Feb 2014 11:51:31 -0500
+Subject: [PATCH] board: add to sockit a working preloader design
+
+---
+ board/altera/socfpga_cyclone5/build.h              |   2 +-
+ board/altera/socfpga_cyclone5/iocsr_config.c       | 314 ++++++++++-----------
+ board/altera/socfpga_cyclone5/pinmux_config.c      |  32 +--
+ board/altera/socfpga_cyclone5/pinmux_config.h      |   8 +-
+ board/altera/socfpga_cyclone5/sdram/sdram_config.h |  14 +-
+ .../altera/socfpga_cyclone5/sdram/sequencer_auto.h |  16 +-
+ .../sdram/sequencer_auto_ac_init.c                 |  16 +-
+ .../socfpga_cyclone5/sdram/sequencer_defines.h     |  34 +--
+ 8 files changed, 218 insertions(+), 218 deletions(-)
+
+diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
+index e5d9c3c..a369015 100644
+--- a/board/altera/socfpga_cyclone5/build.h
++++ b/board/altera/socfpga_cyclone5/build.h
+@@ -29,7 +29,7 @@
+  * Handoff files must provide user option whether to
+  * enable watchdog during preloader execution phase
+  */
+-#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(0)
++#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(1)
+ 
+ /*
+  * Handoff files must provide user option whether to enable
+diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
+index fa663e1..90fc154 100644
+--- a/board/altera/socfpga_cyclone5/iocsr_config.c
++++ b/board/altera/socfpga_cyclone5/iocsr_config.c
+@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
+ 	0xC0000000,
+ 	0x0000003F,
+ 	0x00008000,
+-	0x00020080,
+-	0x08020000,
+-	0x08000000,
+-	0x00018020,
++	0x00060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
+ 	0x00000000,
+ 	0x00004000,
+-	0x00010040,
+-	0x04010000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x000300C0,
++	0x0C030000,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x00020000,
+-	0x02008000,
+-	0x02000000,
+-	0x00000008,
+-	0x00002008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+ };
+ 
+ const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+-	0x000C0300,
+-	0x10040000,
+-	0x100000C0,
+-	0x00000040,
+-	0x00010040,
++	0x00100000,
++	0x300C0000,
++	0x300000C0,
++	0x000000C0,
++	0x000300C0,
+ 	0x00008000,
+ 	0x00080000,
+-	0x18060000,
+-	0x18000000,
+-	0x00000060,
+-	0x00018060,
++	0x20000000,
++	0x00000000,
++	0x00000080,
++	0x00020000,
+ 	0x00004000,
+-	0x00010040,
++	0x000300C0,
+ 	0x10000000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
++	0x06018060,
++	0x06018000,
+ 	0x01FE0000,
+ 	0xF8000000,
+ 	0x00000007,
+ 	0x00001000,
+-	0x00004010,
+-	0x01004000,
+-	0x01000000,
+-	0x00003004,
+-	0x00001004,
++	0x0000C030,
++	0x0300C000,
++	0x03000000,
++	0x0000300C,
++	0x0000300C,
+ 	0x00000800,
+ 	0x00000000,
+ 	0x00000000,
+-	0x00800000,
+-	0x00000002,
++	0x01800000,
++	0x00000006,
+ 	0x00002000,
+ 	0x00000400,
+ 	0x00000000,
+-	0x00401000,
++	0x00C03000,
+ 	0x00000003,
+ 	0x00000000,
+ 	0x00000000,
+ 	0x00000200,
+-	0x00600802,
++	0x00601806,
+ 	0x00000000,
+-	0x80200000,
+-	0x80000600,
+-	0x00000200,
++	0x80600000,
++	0x80000601,
++	0x00000601,
+ 	0x00000100,
+-	0x00300401,
+-	0xC0100400,
+-	0x40100000,
+-	0x40000300,
+-	0x000C0100,
++	0x00300C03,
++	0xC0300C00,
++	0xC0300000,
++	0xC0000300,
++	0x000C0300,
+ 	0x00000080,
+ };
+ 
+ const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+-	0x80040100,
++	0x300C0300,
+ 	0x00000000,
+ 	0x0FF00000,
+ 	0x00000000,
+-	0x0C010040,
++	0x0C0300C0,
+ 	0x00008000,
+-	0x18020080,
+-	0x00000000,
+-	0x08000000,
+-	0x00040020,
+-	0x06018060,
++	0x18060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
++	0x00018060,
+ 	0x00004000,
+-	0x0C010040,
+-	0x04010000,
++	0x000300C0,
++	0x0C030000,
+ 	0x00000030,
+ 	0x00000000,
+-	0x03004010,
++	0x0300C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
+-	0x02000018,
+-	0x00006008,
+-	0x01802008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+-	0x03004010,
+-	0x01004000,
+-	0x0100000C,
+-	0x00003004,
+-	0x00C01004,
++	0x0000C030,
++	0x00000000,
++	0x03000000,
++	0x0000000C,
++	0x00C0300C,
+ 	0x00000800,
+ };
+ 
+@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
+-	0x01A01C70,
++	0x34059606,
++	0x01A03CF0,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
++	0x59606803,
++	0x03CF0340,
+ 	0xD000001A,
+ 	0x068030C0,
+ 	0x10040000,
+@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
++	0x34059606,
+ 	0x01A00000,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
+-	0xD00E381A,
++	0x59606803,
++	0x03CF0340,
++	0xD01E781A,
+ 	0x068030C0,
+ 	0x10040000,
+ 	0x00200000,
+@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x01860680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00015000,
+@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
+-	0x821A00C3,
++	0xF5DE791E,
++	0x0356D348,
++	0x821A02CB,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x04000002,
+ 	0x00820000,
+ 	0x00489000,
+-	0x001A1A1A,
+-	0x085506A0,
+-	0x0000E1D4,
+-	0x045506A0,
+-	0x0000E1D4,
+-	0x085506A0,
+-	0x8000E1D4,
++	0x801A1A1A,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
+ 	0x00000200,
+ 	0x00000004,
+-	0x04000000,
+-	0x00000009,
+-	0x00002410,
++	0x00040000,
++	0x10000000,
++	0x00000000,
+ 	0x00000040,
+-	0x41000000,
+-	0x00002082,
+-	0x00000350,
+-	0x000000DA,
++	0x00010000,
++	0x40002000,
++	0x00000100,
++	0x40000002,
++	0x00000100,
++	0x40000002,
+ 	0x00000100,
+ 	0x40000002,
+ 	0x00000100,
+ 	0x00000002,
+-	0x042A8350,
+-	0x000070EA,
+-	0x86000000,
+-	0x08000004,
++	0x00020000,
++	0x08000000,
+ 	0x00000000,
+-	0x00482000,
+-	0x21800000,
+-	0x00101061,
+-	0x021541A8,
+-	0x00003875,
+-	0x011541A8,
+-	0x00003875,
+-	0x021541A8,
+-	0x20003875,
++	0x00000020,
++	0x00008000,
++	0x20001000,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
+ 	0x00000080,
+ 	0x00000001,
+-	0x41000000,
+-	0x00000002,
+-	0x00FF0904,
++	0x00010000,
++	0x04000000,
++	0x00FF0000,
+ 	0x00000000,
+-	0x90400000,
+-	0x00000820,
++	0x00004000,
++	0x00000800,
+ 	0x80000001,
+-	0x38D612AF,
+-	0x86F8E38E,
+-	0x0A0A78B4,
+-	0x000D020A,
++	0x00041419,
++	0x40000000,
++	0x04000816,
++	0x000D0000,
+ 	0x00006800,
+-	0x028A4320,
+-	0xEBB4D23D,
+-	0x8F65E791,
+-	0xA47A0F3C,
+-	0x0001A769,
+-	0x00410D00,
++	0x00000340,
++	0xD000001A,
++	0x06800000,
++	0x00340000,
++	0x0001A000,
++	0x00000D00,
+ 	0x40000068,
+-	0x3D000003,
+-	0x91EBB4D2,
+-	0x3C8F65E7,
+-	0x69A47A0F,
+-	0x000001A7,
++	0x1A000003,
++	0x00D00000,
++	0x00068000,
++	0x00003400,
++	0x000001A0,
++	0x00000401,
++	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+-	0x00000540,
+-	0x000003A8,
+-	0x10AA0D40,
+-	0x8001C3A8,
++	0x00000401,
++	0x80000008,
+ 	0x0000007F,
++	0x20000000,
+ 	0x00000000,
+-	0x00004060,
+-	0xE1208000,
++	0xE0000080,
+ 	0x0000001F,
+-	0x00004100,
++	0x00004000,
+ };
+ 
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
+index 730067e..cfd74cd 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.c
++++ b/board/altera/socfpga_cyclone5/pinmux_config.c
+@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	0, /* EMACIO18 */
+ 	0, /* EMACIO19 */
+ 	3, /* FLASHIO0 */
+-	3, /* FLASHIO1 */
++	0, /* FLASHIO1 */
+ 	3, /* FLASHIO2 */
+ 	3, /* FLASHIO3 */
+ 	0, /* FLASHIO4 */
+@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	3, /* FLASHIO9 */
+ 	3, /* FLASHIO10 */
+ 	3, /* FLASHIO11 */
+-	3, /* GENERALIO0 */
+-	3, /* GENERALIO1 */
+-	3, /* GENERALIO2 */
+-	3, /* GENERALIO3 */
+-	3, /* GENERALIO4 */
+-	3, /* GENERALIO5 */
+-	3, /* GENERALIO6 */
+-	3, /* GENERALIO7 */
+-	3, /* GENERALIO8 */
++	0, /* GENERALIO0 */
++	1, /* GENERALIO1 */
++	1, /* GENERALIO2 */
++	1, /* GENERALIO3 */
++	1, /* GENERALIO4 */
++	0, /* GENERALIO5 */
++	0, /* GENERALIO6 */
++	0, /* GENERALIO7 */
++	0, /* GENERALIO8 */
+ 	3, /* GENERALIO9 */
+ 	3, /* GENERALIO10 */
+ 	3, /* GENERALIO11 */
+ 	3, /* GENERALIO12 */
+-	2, /* GENERALIO13 */
+-	2, /* GENERALIO14 */
+-	3, /* GENERALIO15 */
+-	3, /* GENERALIO16 */
+-	2, /* GENERALIO17 */
+-	2, /* GENERALIO18 */
++	0, /* GENERALIO13 */
++	0, /* GENERALIO14 */
++	1, /* GENERALIO15 */
++	1, /* GENERALIO16 */
++	1, /* GENERALIO17 */
++	1, /* GENERALIO18 */
+ 	0, /* GENERALIO19 */
+ 	0, /* GENERALIO20 */
+ 	0, /* GENERALIO21 */
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
+index fb483ab..64c750a 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.h
++++ b/board/altera/socfpga_cyclone5/pinmux_config.h
+@@ -11,15 +11,15 @@
+ #define CONFIG_HPS_UART0 (1)
+ #define CONFIG_HPS_UART1 (0)
+ #define CONFIG_HPS_TRACE (0)
+-#define CONFIG_HPS_I2C0 (1)
+-#define CONFIG_HPS_I2C1 (0)
++#define CONFIG_HPS_I2C0 (0)
++#define CONFIG_HPS_I2C1 (1)
+ #define CONFIG_HPS_I2C2 (0)
+ #define CONFIG_HPS_I2C3 (0)
+ #define CONFIG_HPS_SPIM0 (1)
+-#define CONFIG_HPS_SPIM1 (0)
++#define CONFIG_HPS_SPIM1 (1)
+ #define CONFIG_HPS_SPIS0 (0)
+ #define CONFIG_HPS_SPIS1 (0)
+-#define CONFIG_HPS_CAN0 (1)
++#define CONFIG_HPS_CAN0 (0)
+ #define CONFIG_HPS_CAN1 (0)
+ 
+ #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+index b90d6f3..dd027ef 100755
+--- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
++++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+@@ -4,16 +4,16 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			(2)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(1)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(0)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		(1)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		(10)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(6)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(7)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(11)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			(12)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			(104)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		(3120)
+@@ -21,7 +21,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		(4)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			(14)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			(20)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			(4)
+@@ -33,7 +33,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		(15)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(40)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(32)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			(2)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+index e8c5484..919676d 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+@@ -34,7 +34,7 @@
+ #define __RW_MGR_ac_read_en 0x21
+ #define __RW_MGR_ac_mrs3_mirr 0x0C
+ #define __RW_MGR_ac_mrs2 0x05
+-#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
++#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
+ #define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
+ #define __RW_MGR_CONTENT_ac_act_1 0x106B0000
+@@ -46,8 +46,8 @@
+ #define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
+ #define __RW_MGR_CONTENT_ac_pre_all 0x10280400
+-#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
++#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
+ #define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
+@@ -55,21 +55,21 @@
+ #define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
+ #define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
+-#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
++#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
+ #define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
+ #define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
+ #define __RW_MGR_CONTENT_ac_zqcl 0x10380400
+ #define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
+-#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
++#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
+ #define __RW_MGR_CONTENT_ac_ref 0x10480000
+ #define __RW_MGR_CONTENT_ac_nop 0x30780000
+ #define __RW_MGR_CONTENT_ac_rdimm 0x10780000
+-#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
++#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
+ #define __RW_MGR_CONTENT_ac_read_en 0x33780000
+ #define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
+-#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
++#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
+ 
+ #define __RW_MGR_READ_B2B_WAIT2 0x6A
+ #define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+index e16efa1..20b4ca1 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
+ {
+ 	0x20700000,
+ 	0x20780000,
+-	0x10080431,
+-	0x10080530,
+-	0x10090044,
+-	0x100a0008,
++	0x10080471,
++	0x10080570,
++	0x10090006,
++	0x100a0218,
+ 	0x100b0000,
+ 	0x10380400,
+-	0x10080449,
+-	0x100804c8,
+-	0x100a0024,
+-	0x10090010,
++	0x10080469,
++	0x100804e8,
++	0x100a0006,
++	0x10090218,
+ 	0x100b0000,
+ 	0x30780000,
+ 	0x38780000,
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+index 52faf3f..b85b85c 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+@@ -1,28 +1,28 @@
+ #ifndef _SEQUENCER_DEFINES_H_
+ #define _SEQUENCER_DEFINES_H_
+ 
+-#define AC_ROM_MR1_MIRR 0000000100100
++#define AC_ROM_MR1_MIRR 0000000000110
+ #define AC_ROM_MR1_OCD_ENABLE
+-#define AC_ROM_MR2_MIRR 0000000010000
++#define AC_ROM_MR2_MIRR 0001000011000
+ #define AC_ROM_MR3_MIRR 0000000000000
+ #define AC_ROM_MR0_CALIB
+-#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
+-#define AC_ROM_MR0_DLL_RESET 0010100110000
+-#define AC_ROM_MR0_MIRR 0010001001001
+-#define AC_ROM_MR0 0010000110001
+-#define AC_ROM_MR1 0000001000100
+-#define AC_ROM_MR2 0000000001000
++#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
++#define AC_ROM_MR0_DLL_RESET 0010101110000
++#define AC_ROM_MR0_MIRR 0010001101001
++#define AC_ROM_MR0 0010001110001
++#define AC_ROM_MR1 0000000000110
++#define AC_ROM_MR2 0001000011000
+ #define AC_ROM_MR3 0000000000000
+ #define AFI_CLK_FREQ 401
+ #define AFI_RATE_RATIO 1
+ #define ARRIAVGZ 0
+ #define ARRIAV 0
+-#define AVL_CLK_FREQ 67
++#define AVL_CLK_FREQ 81
+ #define BFM_MODE 0
+ #define BURST2 0
+ #define CALIBRATE_BIT_SLIPS 0
+-#define CALIB_LFIFO_OFFSET 7
+-#define CALIB_VFIFO_OFFSET 5
++#define CALIB_LFIFO_OFFSET 11
++#define CALIB_VFIFO_OFFSET 9
+ #define CYCLONEV 1
+ #define DDR2 0
+ #define DDR3 1
+@@ -89,20 +89,20 @@
+ #define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
+ #define RW_MGR_MEM_CLK_EN_WIDTH 1
+ #define RW_MGR_MEM_CONTROL_WIDTH 1
+-#define RW_MGR_MEM_DATA_MASK_WIDTH 5
+-#define RW_MGR_MEM_DATA_WIDTH 40
++#define RW_MGR_MEM_DATA_MASK_WIDTH 4
++#define RW_MGR_MEM_DATA_WIDTH 32
+ #define RW_MGR_MEM_DQ_PER_READ_DQS 8
+ #define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
+-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
+-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
++#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
++#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
+ #define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
+ #define RW_MGR_MEM_NUMBER_OF_RANKS 1
+ #define RW_MGR_MEM_ODT_WIDTH 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
+ #define RW_MGR_MR0_BL 1
+-#define RW_MGR_MR0_CAS_LATENCY 3
+-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
++#define RW_MGR_MR0_CAS_LATENCY 7
++#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
+ #define RW_MGR_WRITE_TO_DEBUG_READ 1.0
+ #define SKEW_CALIBRATION 0
+ #define STATIC_FULL_CALIBRATION 1
+-- 
+1.9.0
+

board/arm/foundation-v8/readme.txt

@@ -3,7 +3,7 @@ ARM software simulator of the AArch64 architecture.
 
 First, one has to download the AArch64 software simulator from:
 
-  https://silver.arm.com/download/download.tm?pv=1317469
+  https://silver.arm.com/download/download.tm?pv=1509509
 
 Then, use the arm_foundationv8_defconfig configuration to build your
 Buildroot system.

board/armadeus/apf9328/linux-3.1.1-0001-fixes_arm_mach-types_for_apf9328.patch

@@ -1,26 +0,0 @@
-From 053ba505eb0d40287ac5750daf454af0aed2ce75 Mon Sep 17 00:00:00 2001
-From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
-Date: Tue, 4 Oct 2011 14:19:58 +0200
-Subject: [PATCH 1/2] [ARM] mach-types: Re-add apf9328
-
-
-Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
----
- arch/arm/tools/mach-types |    1 +
- 1 files changed, 1 insertions(+), 0 deletions(-)
-
-diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
-index fff68d0..07811a7 100644
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -188,6 +188,7 @@ omap_2430sdp		MACH_OMAP_2430SDP	OMAP_2430SDP		900
- davinci_evm		MACH_DAVINCI_EVM	DAVINCI_EVM		901
- palmz72			MACH_PALMZ72		PALMZ72			904
- nxdb500			MACH_NXDB500		NXDB500			905
-+apf9328			MACH_APF9328		APF9328			906
- palmt5			MACH_PALMT5		PALMT5			917
- palmtc			MACH_PALMTC		PALMTC			918
- omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
--- 
-1.7.3.4
-

board/armadeus/apf9328/linux-3.1.1-0002-add_missing_config_option_for_apf9328.patch

@@ -1,16 +0,0 @@
-APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH.
-
-Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
-
-Index: linux-3.1.1/arch/arm/mach-imx/Kconfig
-===================================================================
---- linux-3.1.1.orig/arch/arm/mach-imx/Kconfig	2011-11-16 14:45:55.000000000 +0100
-+++ linux-3.1.1/arch/arm/mach-imx/Kconfig	2011-11-16 14:47:20.000000000 +0100
-@@ -84,6 +84,7 @@
- 	bool "APF9328"
- 	select SOC_IMX1
- 	select IMX_HAVE_PLATFORM_IMX_UART
-+	select MTD_CFI_INTELEXT
- 	help
- 	  Say Yes here if you are using the Armadeus APF9328 development board
- 

board/atmel/xplained/readme.txt

@@ -0,0 +1,73 @@
+Atmel SAMA5D3 Xplained board
+============================
+
+This document explains how to set up a basic Buildroot system on the
+Atmel SAMA5D3 Xplained board, whose main site is
+http://www.atmel.com/tools/ATSAMA5D3-XPLD.aspx. Additional details can
+also be found on the http://www.at91.com/linux4sam/bin/view/Linux4SAM/
+web site.
+
+Note that the default Buildroot configuration is prepared to boot from
+an SD card: the first stage bootloader, second stage bootloader,
+kernel image and root filesystem are all located on the SD card. Some
+adjustements in the bootloader configuration will be needed to boot
+from NAND flash.
+
+Configuring and building Buildroot
+----------------------------------
+
+  make atmel_xplained_defconfig
+  make
+
+Preparing the SD card
+---------------------
+
+The SD card must be partitionned with at least two partitions: one
+FAT16 partition for the bootloaders, kernel image and Device Tree
+blob, and one ext4 partition for the root filesystem. To partition the
+SD card:
+
+sudo sfdisk -uM /dev/mmcblk0 <<EOF
+,64,6
+;
+EOF
+
+This creates a 64 MB partition for the FAT16 filesystem (type 6) and
+uses the rest for the ext4 filesystem used for the root filesystem.
+
+Then, format both partitions:
+
+sudo mkfs.msdos -n boot /dev/mmcblk0p1
+sudo mkfs.ext4 -L rootfs -O ^huge_file /dev/mmcblk0p2
+
+ Note: the -O ^huge_file option is needed to avoid enabling the huge
+ files features of ext4 (to support files larges than 2 TB), which
+ needs the kernel option CONFIG_LBDAF to be enabled.
+
+Mount both partitions (if not done automatically by your system):
+
+sudo mount /dev/mmcblk0p1 /media/boot
+sudo mount /dev/mmcblk0p2 /media/rootfs
+
+Copy the bootloaders, kernel image and Device Tree blob to the first
+partition:
+
+cp output/images/sama5d3_xplained-sdcardboot-uboot-3.6.2.bin /media/boot/boot.bin
+cp output/images/u-boot.bin /media/boot/u-boot.bin
+cp output/images/zImage /media/boot/zImage
+cp output/images/at91-sama5d3_xplained.dtb /media/boot/at91-sama5d3_xplained.dtb
+
+Extract the root filesystem to the second partition:
+
+sudo tar -C /media/rootfs -xf output/images/rootfs.tar
+
+Unmount both partitions:
+
+sudo umount /media/boot
+sudo umount /media/rootfs
+
+Insert your SD card in your Xplained board, and enjoy. The default
+U-Boot environment will properly load the kernel and Device Tree blob
+from the first partition of the SD card, so everything works
+automatically.
+

board/avnet/zedboard/readme.txt

@@ -5,24 +5,68 @@ System-On-Chip.
 Zedboard information including schematics, reference designs, and manuals are
 available from http://www.zedboard.org .
 
-To boot the Zedboard using a buildroot generated image copy the following files
-to the sdcard:
-	zynq-zed.dtb -> devicetree.dtb
-	rootfs.cpio.gz.uboot -> uramdisk.image.gz
-	uImage -> uImage
+The U-Boot firmware for the Xilinx Zynq All Programmable SoC depends
+on some propietary code. This dependency consists of a pair of
+files are available from the Xilinx SDK installation.
 
-Uboot Support
--------------
+You will need these files from Xilinx SDK installation to generate
+the U-Boot firmware:
+	ps7_init.c
+	ps7_init.h
 
-Uboot is installed in a wrapper file called BOOT.BIN located on the root of
-the SD card.  To create the BOOT.BIN file do the following.
+Buildroot will create the following files and place them in the
+<output>/images directory.
+	zynq-zed.dtb
+	rootfs.cpio.uboot
+	uImage
+	u-boot.img
+	boot.bin
 
-source <path/to/xilinx/settings.sh>
-cat <<EOF > boot.bif
-{
-   [bootloader]<path/to/fsbl.elf>
-   <path/to/system.bit>
-   <path/to/uboot.elf>
-}
-EOF
-bootgen -image boot.bif -o i BOOT.BIN
+
+uboot.bin  -- U-Boot SPL w/ Xilinx boot.bin wrapper
+---------------------------------------------------
+
+Due to licensing issues, the files ps7_init.c/h are not able to be
+distributed with the U-Boot source code.  These files are required to make a
+boot.bin file.
+
+If you already have the Xilinx tools installed, the following sequence will
+unpack, patch and build the rfs, kernel, uboot, and uboot-spl.
+
+make zedboard_defconfig
+make uboot-patch
+cp ${XILINX}/ISE_DS/EDK/sw/lib/hwplatform_templates/zed_hw_platform/ps7_init.{c,h} \
+output/build/uboot-xilinx-v2014.1/board/xilinx/zynq/
+
+After copying these files into the U-Boot source tree, you can
+continue the build with:
+
+make
+
+*Notice*
+While the build will successfully complete without the ps7_init.*
+files,  the uboot.bin file generated by this configuration will not
+function properly on the Zedboard.  Therefore, it is imperative that
+the ps7_init.* files be copied into the U-Boot source tree any time
+the clean, or uboot-dirclean targets are made.
+
+
+Resulting system
+----------------
+A FAT32 partition should be created at the beggining of the SD Card
+and the following files should be installed:
+	/boot.bin
+	/devicetree.dtb
+	/uImage
+	/uramdisk.image.gz
+	/u-boot.img
+
+
+All needed files can be taken from output/images/
+
+boot.bin, uImage and u-boot.img are direct copies of the same files
+available on output/images/
+
+devicetree.dtb is just zynq-zed.dtb renamed.
+
+uramdisk.image.gz is rootfs.cpio.uboot renamed

board/beaglebone/linux-3.12.config

@@ -122,7 +122,6 @@ CONFIG_SMSC_PHY=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 CONFIG_SERIO_LIBPS2=y
-CONFIG_VT_HW_CONSOLE_BINDING=y
 # CONFIG_LEGACY_PTYS is not set
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
@@ -163,6 +162,16 @@ CONFIG_REGULATOR_TPS65023=y
 CONFIG_REGULATOR_TPS6507X=y
 CONFIG_REGULATOR_TPS65217=y
 CONFIG_REGULATOR_TIAVSCLASS0=y
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+CONFIG_FB_DA8XX=y
+CONFIG_FB_DA8XX_TDA998X=y
+CONFIG_OMAP2_DSS=y
+CONFIG_OMAP2_DSS_SDI=y
+CONFIG_OMAP2_DSS_DSI=y
+CONFIG_FB_OMAP2=y
+CONFIG_DISPLAY_CONNECTOR_HDMI=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_MON=y

board/beaglebone/patches/linux/linux-0001-arm-Export-cache-flush-management-symbols-when-MULTI.patch

@@ -0,0 +1,34 @@
+From 29885f2f3d700341d322274db6ad085e601c0994 Mon Sep 17 00:00:00 2001
+From: Pantelis Antoniou <panto@antoniou-consulting.com>
+Date: Fri, 4 Jan 2013 00:32:33 +0200
+Subject: [PATCH 3/3] arm: Export cache flush management symbols when
+ !MULTI_CACHE
+
+When compiling a kernel without CONFIG_MULTI_CACHE enabled the
+dma access functions end up not being exported. Fix it.
+
+Signed-off-by: Pantelis Antoniou <panto@antoniou-consulting.com>
+---
+ arch/arm/kernel/setup.c |    9 +++++++++
+ 1 file changed, 9 insertions(+)
+
+diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c
+index da1d1aa..dcb678c 100644
+--- a/arch/arm/kernel/setup.c
++++ b/arch/arm/kernel/setup.c
+@@ -923,3 +923,12 @@ const struct seq_operations cpuinfo_op = {
+ 	.stop	= c_stop,
+ 	.show	= c_show
+ };
++
++/* export the cache management functions */
++#ifndef MULTI_CACHE
++
++EXPORT_SYMBOL(__glue(_CACHE,_dma_map_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_unmap_area));
++EXPORT_SYMBOL(__glue(_CACHE,_dma_flush_range));
++
++#endif
+-- 
+1.7.10.4
+

board/beaglebone/post-image.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+# post-image.sh for BeagleBone
+# 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
+
+# copy the uEnv.txt to the output/images directory
+cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt

board/beaglebone/readme.txt

@@ -0,0 +1,62 @@
+BeagleBone
+
+Intro
+=====
+To be able to use BeagleBone board with the images generated by
+Buildroot, you have prepare the SDCard.
+
+How to build it
+===============
+
+  $ make beaglebone_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should get a tree like this:
+
+  output/images/
+  ├── am335x-boneblack.dtb
+  ├── am335x-bone.dtb
+  ├── MLO
+  ├── rootfs.ext2
+  ├── u-boot.img
+  ├── uEnv.txt
+  └── zImage
+
+
+Prepare you SDCard
+==================
+
+You need to prepare first partition in fat32 and marked as bootable,
+and second where you will write rootfs.
+
+Copy the files to boot partition
+
+  $ cp MLO u-boot.img zImage uEnv.txt *.dtb /media/zzzzz
+
+where /media/zzzzz is the mount point
+Then you need to write the rootfs image onto SDCard:
+
+  # dd if=rootfs.ext2 of=/dev/xxxxx
+
+where /dev/xxxxx is the second partition. Use:
+
+  # fdisk -l
+
+to check for correct one.
+
+Finish
+======
+
+Unmount all mounted SDCard partitions and insert the card to BeagleBone.
+Hold the "BOOT" button and apply power. Then release the "BOOT" button.
+The output is available on the serial console.

board/beaglebone/uEnv.txt

@@ -0,0 +1,3 @@
+bootpart=0:1
+bootdir=
+uenvcmd=run loadimage;run loadramdisk;run findfdt;run loadfdt;run ramboot

board/boundarydevices/nitrogen6x/post-build.sh

@@ -8,11 +8,11 @@
 BOARD_DIR="$(dirname $0)"
 
 # bd u-boot looks for bootscript here
-cp $BOARD_DIR/6x_bootscript $TARGET_DIR
+install -D -m 0644 $BOARD_DIR/6x_bootscript $TARGET_DIR/6x_bootscript
 
 # u-boot / update script for bd upgradeu command
 if [ -e $BINARIES_DIR/u-boot.imx ];
 then
-    cp $BINARIES_DIR/u-boot.imx $TARGET_DIR
-    cp $BOARD_DIR/6x_upgrade $TARGET_DIR
+    install -D -m 0644 $BINARIES_DIR/u-boot.imx $TARGET_DIR/u-boot.imx
+    install -D -m 0644 $BOARD_DIR/6x_upgrade $TARGET_DIR/6x_upgrade
 fi

board/boundarydevices/nitrogen6x/readme.txt

@@ -7,3 +7,7 @@ To install, simply extract rootfs.ext2 to first partition of a uSD card:
 sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
 
 Where 'sdX1' is the device node of the uSD partition.
+
+To upgrade u-boot, cancel autoboot and type:
+
+run upgradeu

board/ci20/readme.txt

@@ -0,0 +1,42 @@
+*********************
+* MIPS Creator CI20 *
+*********************
+
+The 'ci20_defconfig' will create a root filesystem and a kernel image
+under the 'output/images/' directory. This document will try to explain how
+to use them in order to run Buildroot in the MIPS Creator CI20 board.
+
+Assuming you are at the U-Boot prompt of the MIPS Creator CI20, you have to
+load the generated kernel image by using the 'tftpboot' command. In
+order to do that, you will need to get the network working. Here you
+have the instructions to set the ip address, netmask and gateway:
+
+  setenv ipaddr x.x.x.x
+  setenv netmask x.x.x.x
+  setenv gatewayip x.x.x.x
+
+Now you have to set the ip for the TFTP server you are going to load the
+kernel image from, and also the name of the kernel image file (we use
+'uImage' as a filename in this example):
+
+  setenv serverip x.x.x.x
+  setenv bootfile uImage
+
+And finally load the kernel image:
+
+  tftpboot
+
+Now you have to extract the generated root filesystem into a USB drive
+or SD-Card. Here you have the instructions to boot from the two of them.
+You have to choose the one your prefer:
+
+From USB
+  setenv bootargs console=ttyS4,115200 console=tty0 mem=256M@0x0
+mem=768M@0x30000000 root=/dev/sda1
+
+From SD-Card
+  setenv bootargs console=ttyS4,115200 console=tty0 mem=256M@0x0
+mem=768M@0x30000000 root=/dev/mmcblk0p1
+
+And finally run this command to boot the board:
+  bootm

board/congatec/qmx6/6q_bootscript.txt

@@ -0,0 +1,2 @@
+set bootargs console=ttymxc1,115200 root=/dev/mmcblk0p1 rootwait consoleblank=0
+${fs}load mmc ${disk}:1 10800000 /boot/uImage && bootm 10800000 ; echo "Error loading kernel image"

board/congatec/qmx6/post-build.sh

@@ -0,0 +1,7 @@
+#!/bin/sh
+
+TARGET_DIR=$1
+BOARD_DIR="$(dirname $0)"
+
+mkimage -A arm -O linux -T script -C none -a 0 -e 0 -n "boot script" \
+    -d $BOARD_DIR/6q_bootscript.txt $TARGET_DIR/6q_bootscript

board/congatec/qmx6/readme.txt

@@ -0,0 +1,36 @@
+This is the minimal buildroot support for the Congatec QMX6 Qseven CoM
+
+conga-QMX6 is based on the freescale iMX6 SoC. For more information please
+have a look at http://www.congatec.com/products/qseven/conga-qmx6.html
+
+The configuration is based on the currently latest kernel release from
+Congatec's git repository which is based on 3.0.35. The bootloader u-boot
+is preconfigured on the CPU module and does not need to be replaced.
+
+To build the default configuration you only have to:
+
+	make qmx6_defconfig && make
+
+You will need a microSD card of sufficient size and the first or only
+partition configured as Linux type.
+
+To transfer the system to the card do:
+
+	$ sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+You can optionally extend the filesystem size to the whole partition:
+
+	$ sudo resize2fs /dev/sdX1
+
+You can also update the card image without completely rewriting it:
+
+	$ sudo mount /dev/sdX1 /mnt
+	$ sudo tar xf output/images/rootfs.tar -C /mnt
+	$ sudo umount /mnt
+
+Connect a terminal program to the rs232 connector marked "CONSOLE"
+with baudrate set to 115200, insert the microSD card into the socket
+on the CPU module and power the board to watch the system boot.
+
+Booting from the SD card slot on the base board is currently not
+supported.

board/freescale/imx53loco/create-boot-sd.sh

@@ -0,0 +1 @@
+../imx6sabresd/create-boot-sd.sh

board/freescale/imx6sabresd/create-boot-sd.sh

@@ -0,0 +1,93 @@
+#!/bin/sh
+
+set -u
+set -e
+
+PROGNAME=$(basename $0)
+
+usage()
+{
+    echo "Create an SD card that boots on an i.MX53/6 board."
+    echo
+    echo "Note: all data on the the card will be completely deleted!"
+    echo "Use with care!"
+    echo "Superuser permissions may be required to write to the device."
+    echo
+    echo "Usage: ${PROGNAME} <sd_block_device>"
+    echo "Arguments:"
+    echo "  <sd_block_device>     The device to be written to"
+    echo
+    echo "Example: ${PROGNAME} /dev/mmcblk0"
+    echo
+}
+
+if [ $# -ne 1 ]; then
+    usage
+    exit 1
+fi
+
+if [ $(id -u) -ne 0 ]; then
+    echo "${PROGNAME} must be run as root"
+    exit 1
+fi
+
+DEV=${1}
+
+# The partition name prefix depends on the device name:
+# - /dev/sde -> /dev/sde1
+# - /dev/mmcblk0 -> /dev/mmcblk0p1
+if echo ${DEV}|grep -q mmcblk ; then
+    PART="p"
+else
+    PART=""
+fi
+
+PART1=${DEV}${PART}1
+PART2=${DEV}${PART}2
+
+# Unmount the partitions if mounted
+umount ${PART1} || true
+umount ${PART2} || true
+
+# First, clear the card
+dd if=/dev/zero of=${DEV} bs=1M count=20
+
+sync
+
+# Partition the card.
+# SD layout for i.MX6 boot:
+# - Bootloader at offset 1024
+# - FAT partition starting at 1MB offset, containing uImage and *.dtb
+# - ext2/3 partition formatted as ext2 or ext3, containing the root filesystem.
+sfdisk ${DEV} <<EOF
+32,480,b
+512,,L
+EOF
+
+sync
+
+# Copy the bootloader at offset 1024
+dd if=output/images/u-boot.imx of=${DEV} obs=512 seek=2
+
+# Prepare a temp dir for mounting partitions
+TMPDIR=$(mktemp -d)
+
+# FAT partition: kernel and DTBs
+mkfs.vfat ${PART1}
+mount ${PART1} ${TMPDIR}
+cp output/images/*Image ${TMPDIR}/
+cp output/images/*.dtb  ${TMPDIR}/ || true
+sync
+umount ${TMPDIR}
+
+# ext2 partition: root filesystem
+mkfs.ext2 ${PART2}
+mount ${PART2} ${TMPDIR}
+tar -C ${TMPDIR}/ -xf output/images/rootfs.tar
+sync
+umount ${TMPDIR}
+
+# Cleanup
+rmdir ${TMPDIR}
+sync
+echo Done

board/freescale/imx6sabresd/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch

@@ -0,0 +1,36 @@
+From 4a7cd7c5b165317dccf45cfc235da3e14bc339e8 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@freescale.com>
+Date: Tue, 12 Aug 2014 10:17:31 +0200
+Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Buildroot supplies a nice /init wrapper script to use when booting from a
+ramdisk.
+
+This patch tells u-boot to tell the kernel to boot into /init (instead of
+/linuxrc) on i.MX6, when booting in mfgtools mode. This way we can boot a
+buildroot system entirely through USB.
+
+Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
+---
+ include/configs/mx6qsabre_common.h | 2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+diff --git a/include/configs/mx6qsabre_common.h b/include/configs/mx6qsabre_common.h
+index 69ff0df..ec7b665 100644
+--- a/include/configs/mx6qsabre_common.h
++++ b/include/configs/mx6qsabre_common.h
+@@ -129,7 +129,7 @@
+ 
+ #define CONFIG_MFG_ENV_SETTINGS \
+ 	"mfgtool_args=setenv bootargs console=" CONFIG_CONSOLE_DEV ",115200 " \
+-		"rdinit=/linuxrc " \
++		"rdinit=/init " \
+ 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+ 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+ 		"g_mass_storage.iSerialNumber=\"\" "\
+-- 
+2.0.1
+

board/freescale/imx6sabresd/readme.txt

@@ -0,0 +1,67 @@
+*******************************************************
+Freescale i.MX6Q and i.MX6DL SABRESD development boards
+*******************************************************
+
+This file documents the Buildroot support for the Freescale SABRE Board for
+Smart Devices Based on the i.MX 6 Series (SABRESD).
+
+Read the SABRESD Quick Start Guide for an introduction to the board:
+http://cache.freescale.com/files/32bit/doc/quick_start_guide/SABRESDB_IMX6_QSG.pdf
+
+Build
+=====
+
+First, configure Buildroot for your SABRESD board.
+For i.MX6Q:
+
+  make freescale_imx6qsabresd_defconfig
+
+For i.MX6DL:
+
+  make freescale_imx6dlsabresd_defconfig
+
+Build all components:
+
+  make
+
+You will find in ./output/images/ the following files:
+  - imx6dl-sabresd.dtb or imx6q-sabresd.dtb
+  - rootfs.ext2
+  - rootfs.tar
+  - u-boot.imx
+  - uImage
+
+Create a bootable SD card
+=========================
+
+To determine the device associated to the SD card have a look in the
+/proc/partitions file:
+
+  cat /proc/partitions
+
+Run the following script as root on your SD card. This will partition the card
+and copy the bootloader, kernel, DTBs and root filesystem as needed.
+
+*** WARNING! The script will destroy all the card content. Use with care! ***
+
+  ./board/freescale/imx6sabresd/create-boot-sd.sh <your-sd-device>
+
+Boot the SABRESD board
+======================
+
+To boot your newly created system (refer to the SABRESD Quick Start Guide for
+guidance):
+- insert the SD card in the SD3 slot of the board;
+- locate the BOOT dip switches (SW6), set dips 2 and 7 to ON, all others to OFF;
+- connect a Micro USB cable to Debug Port and connect using a terminal emulator
+  at 115200 bps, 8n1;
+- power on the board.
+
+Enjoy!
+
+References
+==========
+
+https://community.freescale.com/docs/DOC-95015
+https://community.freescale.com/docs/DOC-95017
+https://community.freescale.com/docs/DOC-99218

board/freescale/mpc8315erdb/linux-3.18.config

@@ -35,7 +35,6 @@ CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=32768
@@ -65,7 +64,6 @@ CONFIG_I2C_MPC=y
 CONFIG_SPI=y
 CONFIG_SPI_BITBANG=y
 CONFIG_WATCHDOG=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 # CONFIG_USB_HID is not set
 CONFIG_USB=y
 CONFIG_USB_MON=y

board/freescale/mpc8315erdb/readme.txt

@@ -6,7 +6,7 @@ It won't work for NOR and will brick that bootloader!
 Also don't go playing around with different U-boot versions or flash targets
 unless you've got the necessary hardware and/or know-how to unbrick your kit.
 
-2014.01 is known good for NAND.
+2014.04 is known good for NAND.
 ******************** WARNING ********************
 
 You'll need to program the files created by buildroot into the flash.

board/freescale/p1010rdb/linux-3.18.config

@@ -57,11 +57,9 @@ CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_CFI_AMDSTD=y
 CONFIG_MTD_PHYSMAP_OF=y
-CONFIG_MTD_M25P80=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_FSL_ELBC=y
 CONFIG_MTD_NAND_FSL_IFC=y
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_LOOP=y
 CONFIG_BLK_DEV_NBD=y
 CONFIG_BLK_DEV_RAM=y
@@ -71,7 +69,6 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_CHR_DEV_ST=y
 CONFIG_BLK_DEV_SR=y
 CONFIG_CHR_DEV_SG=y
-CONFIG_SCSI_MULTI_LUN=y
 CONFIG_SCSI_LOGGING=y
 CONFIG_ATA=y
 CONFIG_SATA_FSL=y

board/freescale/p1010rdb/readme.txt

@@ -45,7 +45,7 @@ your newly built U-Boot.
 
 2. Program the DTB to NOR flash
 
-    => tftp $loadaddr p1010rdb.dtb
+    => tftp $loadaddr p1010rdb-pa.dtb
     => erase 0xee000000 +$filesize
     => cp.b $loadaddr 0xee000000 $filesize
 

board/freescale/p2020ds/linux-3.12.config

@@ -0,0 +1,374 @@
+CONFIG_PPC_85xx=y
+CONFIG_PHYS_64BIT=y
+CONFIG_SMP=y
+CONFIG_NR_CPUS=8
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_AUDIT=y
+CONFIG_IRQ_DOMAIN_DEBUG=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=16
+CONFIG_CGROUPS=y
+CONFIG_NAMESPACES=y
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+# CONFIG_SLUB_DEBUG is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_MAC_PARTITION=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_POWERNV_MSI is not set
+CONFIG_MPC85xx_DS=y
+CONFIG_HIGHMEM=y
+CONFIG_HOTPLUG_CPU=y
+CONFIG_IRQ_ALL_CPUS=y
+CONFIG_FORCE_MAX_ZONEORDER=12
+# CONFIG_SUSPEND is not set
+CONFIG_PCI=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_RAPIDIO=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_NET_IPIP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+CONFIG_INET_ESP=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=m
+CONFIG_INET_XFRM_MODE_TUNNEL=m
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+CONFIG_NETWORK_SECMARK=y
+CONFIG_NETFILTER=y
+CONFIG_NF_CONNTRACK=m
+CONFIG_NF_CONNTRACK_SECMARK=y
+CONFIG_NF_CONNTRACK_ZONES=y
+CONFIG_NF_CONNTRACK_EVENTS=y
+CONFIG_NF_CONNTRACK_TIMEOUT=y
+CONFIG_NF_CONNTRACK_TIMESTAMP=y
+CONFIG_NF_CT_PROTO_DCCP=m
+CONFIG_NF_CT_PROTO_UDPLITE=m
+CONFIG_NF_CONNTRACK_AMANDA=m
+CONFIG_NF_CONNTRACK_FTP=m
+CONFIG_NF_CONNTRACK_H323=m
+CONFIG_NF_CONNTRACK_IRC=m
+CONFIG_NF_CONNTRACK_NETBIOS_NS=m
+CONFIG_NF_CONNTRACK_SNMP=m
+CONFIG_NF_CONNTRACK_PPTP=m
+CONFIG_NF_CONNTRACK_SANE=m
+CONFIG_NF_CONNTRACK_SIP=m
+CONFIG_NF_CONNTRACK_TFTP=m
+CONFIG_NF_CT_NETLINK=m
+CONFIG_NF_CT_NETLINK_TIMEOUT=m
+CONFIG_NF_CT_NETLINK_HELPER=m
+CONFIG_NETFILTER_NETLINK_QUEUE_CT=y
+CONFIG_NETFILTER_XT_TARGET_AUDIT=m
+CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m
+CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m
+CONFIG_NETFILTER_XT_TARGET_CONNMARK=m
+CONFIG_NETFILTER_XT_TARGET_CONNSECMARK=m
+CONFIG_NETFILTER_XT_TARGET_DSCP=m
+CONFIG_NETFILTER_XT_TARGET_HMARK=m
+CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m
+CONFIG_NETFILTER_XT_TARGET_LED=m
+CONFIG_NETFILTER_XT_TARGET_LOG=m
+CONFIG_NETFILTER_XT_TARGET_MARK=m
+CONFIG_NETFILTER_XT_TARGET_NFLOG=m
+CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m
+CONFIG_NETFILTER_XT_TARGET_NOTRACK=m
+CONFIG_NETFILTER_XT_TARGET_TEE=m
+CONFIG_NETFILTER_XT_TARGET_TPROXY=m
+CONFIG_NETFILTER_XT_TARGET_TRACE=m
+CONFIG_NETFILTER_XT_TARGET_SECMARK=m
+CONFIG_NETFILTER_XT_TARGET_TCPMSS=m
+CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m
+CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m
+CONFIG_NETFILTER_XT_MATCH_BPF=m
+CONFIG_NETFILTER_XT_MATCH_CLUSTER=m
+CONFIG_NETFILTER_XT_MATCH_COMMENT=m
+CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m
+CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m
+CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_CONNMARK=m
+CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m
+CONFIG_NETFILTER_XT_MATCH_CPU=m
+CONFIG_NETFILTER_XT_MATCH_DCCP=m
+CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m
+CONFIG_NETFILTER_XT_MATCH_DSCP=m
+CONFIG_NETFILTER_XT_MATCH_ESP=m
+CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m
+CONFIG_NETFILTER_XT_MATCH_HELPER=m
+CONFIG_NETFILTER_XT_MATCH_IPRANGE=m
+CONFIG_NETFILTER_XT_MATCH_LENGTH=m
+CONFIG_NETFILTER_XT_MATCH_LIMIT=m
+CONFIG_NETFILTER_XT_MATCH_MAC=m
+CONFIG_NETFILTER_XT_MATCH_MARK=m
+CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m
+CONFIG_NETFILTER_XT_MATCH_NFACCT=m
+CONFIG_NETFILTER_XT_MATCH_OSF=m
+CONFIG_NETFILTER_XT_MATCH_OWNER=m
+CONFIG_NETFILTER_XT_MATCH_POLICY=m
+CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m
+CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m
+CONFIG_NETFILTER_XT_MATCH_QUOTA=m
+CONFIG_NETFILTER_XT_MATCH_RATEEST=m
+CONFIG_NETFILTER_XT_MATCH_REALM=m
+CONFIG_NETFILTER_XT_MATCH_RECENT=m
+CONFIG_NETFILTER_XT_MATCH_SOCKET=m
+CONFIG_NETFILTER_XT_MATCH_STATE=m
+CONFIG_NETFILTER_XT_MATCH_STATISTIC=m
+CONFIG_NETFILTER_XT_MATCH_STRING=m
+CONFIG_NETFILTER_XT_MATCH_TCPMSS=m
+CONFIG_NETFILTER_XT_MATCH_TIME=m
+CONFIG_NETFILTER_XT_MATCH_U32=m
+CONFIG_NF_CONNTRACK_IPV4=m
+CONFIG_IP_NF_IPTABLES=m
+CONFIG_IP_NF_MATCH_AH=m
+CONFIG_IP_NF_MATCH_ECN=m
+CONFIG_IP_NF_MATCH_RPFILTER=m
+CONFIG_IP_NF_MATCH_TTL=m
+CONFIG_IP_NF_FILTER=m
+CONFIG_IP_NF_TARGET_REJECT=m
+CONFIG_IP_NF_TARGET_SYNPROXY=m
+CONFIG_IP_NF_TARGET_ULOG=m
+CONFIG_NF_NAT_IPV4=m
+CONFIG_IP_NF_TARGET_MASQUERADE=m
+CONFIG_IP_NF_TARGET_NETMAP=m
+CONFIG_IP_NF_TARGET_REDIRECT=m
+CONFIG_IP_NF_MANGLE=m
+CONFIG_IP_NF_TARGET_CLUSTERIP=m
+CONFIG_IP_NF_TARGET_ECN=m
+CONFIG_IP_NF_TARGET_TTL=m
+CONFIG_IP_NF_RAW=m
+CONFIG_IP_NF_ARPTABLES=m
+CONFIG_IP_NF_ARPFILTER=m
+CONFIG_IP_NF_ARP_MANGLE=m
+CONFIG_NF_CONNTRACK_IPV6=m
+CONFIG_IP6_NF_IPTABLES=m
+CONFIG_IP6_NF_MATCH_AH=m
+CONFIG_IP6_NF_MATCH_EUI64=m
+CONFIG_IP6_NF_MATCH_FRAG=m
+CONFIG_IP6_NF_MATCH_OPTS=m
+CONFIG_IP6_NF_MATCH_HL=m
+CONFIG_IP6_NF_MATCH_IPV6HEADER=m
+CONFIG_IP6_NF_MATCH_MH=m
+CONFIG_IP6_NF_MATCH_RPFILTER=m
+CONFIG_IP6_NF_MATCH_RT=m
+CONFIG_IP6_NF_TARGET_HL=m
+CONFIG_IP6_NF_FILTER=m
+CONFIG_IP6_NF_TARGET_REJECT=m
+CONFIG_IP6_NF_TARGET_SYNPROXY=m
+CONFIG_IP6_NF_MANGLE=m
+CONFIG_IP6_NF_RAW=m
+CONFIG_NF_NAT_IPV6=m
+CONFIG_IP6_NF_TARGET_MASQUERADE=m
+CONFIG_IP6_NF_TARGET_NPT=m
+CONFIG_IP_SCTP=m
+CONFIG_BRIDGE=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_FW_LOADER_USER_HELPER is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_FTL=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_CFI_AMDSTD=y
+CONFIG_MTD_PHYSMAP_OF=y
+CONFIG_MTD_M25P80=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_FSL_ELBC=y
+CONFIG_MTD_NAND_FSL_IFC=y
+CONFIG_MTD_UBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_NBD=y
+CONFIG_EEPROM_LEGACY=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_SATA_FSL=y
+CONFIG_SATA_SIL24=y
+CONFIG_PATA_ALI=y
+CONFIG_MD=y
+CONFIG_BLK_DEV_MD=y
+CONFIG_MD_LINEAR=y
+CONFIG_MD_RAID0=y
+CONFIG_MD_RAID1=y
+CONFIG_MD_RAID10=y
+CONFIG_MD_RAID456=y
+CONFIG_MD_MULTIPATH=y
+CONFIG_BCACHE=y
+CONFIG_BLK_DEV_DM=m
+CONFIG_DM_CRYPT=m
+CONFIG_DM_SNAPSHOT=m
+CONFIG_DM_THIN_PROVISIONING=m
+CONFIG_DM_CACHE=m
+CONFIG_DM_MIRROR=m
+CONFIG_DM_RAID=m
+CONFIG_DM_ZERO=m
+CONFIG_DM_MULTIPATH=m
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_TUN=y
+CONFIG_NET_TULIP=y
+CONFIG_GIANFAR=y
+CONFIG_E1000E=y
+CONFIG_AT803X_PHY=y
+CONFIG_ATHEROS_PHY=y
+CONFIG_MARVELL_PHY=y
+CONFIG_DAVICOM_PHY=y
+CONFIG_CICADA_PHY=y
+CONFIG_VITESSE_PHY=y
+CONFIG_DP8384x_PHY=y
+CONFIG_FIXED_PHY=y
+CONFIG_PPP=m
+CONFIG_PPP_BSDCOMP=m
+CONFIG_PPP_DEFLATE=m
+CONFIG_PPP_FILTER=y
+CONFIG_PPP_MPPE=m
+CONFIG_PPP_MULTILINK=y
+CONFIG_PPPOE=m
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_ATH_CARDS=m
+CONFIG_ATH9K=m
+CONFIG_ATH9K_HTC=m
+CONFIG_RT2X00=m
+CONFIG_RT2800PCI=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RT2800USB_RT3573=y
+CONFIG_RT2800USB_RT53XX=y
+CONFIG_RT2800USB_RT55XX=y
+# CONFIG_RTL_CARDS is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=2
+CONFIG_SERIAL_8250_RUNTIME_UARTS=2
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_NVRAM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MPC=y
+CONFIG_SPI=y
+CONFIG_SPI_FSL_SPI=y
+CONFIG_SPI_FSL_ESPI=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_MPC8XXX=y
+# CONFIG_HWMON is not set
+# CONFIG_VGA_ARB is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_HRTIMER=m
+# CONFIG_SND_SUPPORT_OLD_API is not set
+# CONFIG_SND_DRIVERS is not set
+CONFIG_SND_INTEL8X0=m
+# CONFIG_SND_PPC is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+# CONFIG_HID_GENERIC is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_FSL=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_OHCI_HCD_PPC_OF_BE=y
+CONFIG_USB_OHCI_HCD_PPC_OF_LE=y
+CONFIG_USB_STORAGE=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_OF_ESDHC=y
+CONFIG_EDAC=y
+CONFIG_EDAC_MM_EDAC=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_CMOS=y
+CONFIG_DMADEVICES=y
+CONFIG_FSL_DMA=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FANOTIFY=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_HUGETLBFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_SUMMARY=y
+CONFIG_JFFS2_FS_XATTR=y
+CONFIG_UBIFS_FS=y
+CONFIG_SQUASHFS=y
+CONFIG_SQUASHFS_XATTR=y
+CONFIG_SQUASHFS_LZO=y
+CONFIG_SQUASHFS_XZ=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_CIFS=m
+CONFIG_CIFS_XATTR=y
+CONFIG_CIFS_POSIX=y
+# CONFIG_CIFS_DEBUG is not set
+CONFIG_CIFS_SMB2=y
+CONFIG_CIFS_FSCACHE=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=m
+CONFIG_CRC_T10DIF=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_HMAC=y
+CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_SHA1=y
+CONFIG_CRYPTO_SHA256=y
+CONFIG_CRYPTO_SHA512=y
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_DEV_TALITOS=y

board/freescale/p2020ds/linux-fix-c6187597-breakage.patch

@@ -0,0 +1,51 @@
+From: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
+Subject: [PATCH] usb: pci-quirks: do not access OHCI_FMINTERVAL register on ULI hw
+
+This access causes hang on Freescale P2020DS board (that has OHCI
+provided by ULI 1533 chip).
+
+Since preserving OHCI_FMINTERVAL was originally done only for NVIDIA
+hardware and only later (in c6187597) was turned unconditional, and
+c6187597 commit message again mentions only NVIDIA, I think it should be
+safe to disable preserving OHCI_FMINTERVAL if device vendor is ULI.
+
+Signed-off-by: Nikita Yushchenko <nyushchenko@dev.rtsoft.ru>
+---
+ drivers/usb/host/pci-quirks.c |    8 +++++---
+ 1 file changed, 5 insertions(+), 3 deletions(-)
+
+diff --git a/drivers/usb/host/pci-quirks.c b/drivers/usb/host/pci-quirks.c
+index 00661d3..5acbd5b 100644
+--- a/drivers/usb/host/pci-quirks.c
++++ b/drivers/usb/host/pci-quirks.c
+@@ -571,7 +571,7 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
+ {
+ 	void __iomem *base;
+ 	u32 control;
+-	u32 fminterval;
++	u32 uninitialized_var(fminterval);
+ 	int cnt;
+ 
+ 	if (!mmio_resource_enabled(pdev, 0))
+@@ -619,7 +619,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
+ 	}
+ 
+ 	/* software reset of the controller, preserving HcFmInterval */
+-	fminterval = readl(base + OHCI_FMINTERVAL);
++	if (pdev->vendor != PCI_VENDOR_ID_AL)
++		fminterval = readl(base + OHCI_FMINTERVAL);
+ 	writel(OHCI_HCR, base + OHCI_CMDSTATUS);
+ 
+ 	/* reset requires max 10 us delay */
+@@ -628,7 +629,8 @@ static void quirk_usb_handoff_ohci(struct pci_dev *pdev)
+ 			break;
+ 		udelay(1);
+ 	}
+-	writel(fminterval, base + OHCI_FMINTERVAL);
++	if (pdev->vendor != PCI_VENDOR_ID_AL)
++		writel(fminterval, base + OHCI_FMINTERVAL);
+ 
+ 	/* Now the controller is safely in SUSPEND and nothing can wake it up */
+ 	iounmap(base);
+-- 
+1.7.10.4

board/freescale/p2020ds/readme.txt

@@ -0,0 +1,40 @@
+You'll need to program the files created by buildroot into the flash.
+The fast way is to tftp transfer the files via one of the network interfaces.
+
+Alternatively you can transfer the files via serial console with an Ymodem
+file transfer from your terminal program by using a "loady" command
+from the u-boot prompt instead of the "tftp ..." commands stated below.
+Beware that serial console file transfers are quite slow!
+
+1. Program the DTB to NOR flash
+
+   => tftp ${loadaddr} p2020ds.dtb
+   => erase 0xeff00000 0xeff7ffff
+   => cp.b ${loadaddr} 0xeff00000 ${filesize}
+
+2. Program the kernel to NOR flash
+
+   => tftp ${loadaddr} uImage
+   => erase 0xec000000 0xec3fffff
+   => cp.b ${loadaddr} 0xec000000 ${filesize}
+
+3. Program the root filesystem to NOR flash
+
+   => tftp ${loadaddr} rootfs.jffs2
+   => erase 0xec400000 0xeeffffff
+   => cp.b ${loadaddr} 0xec400000 ${filesize}
+
+4. Booting your new system
+
+   => setenv jffs2boot 'setenv bootargs root=/dev/mtdblock4 rootfstype=jffs2 rw console=ttyS0,115200;bootm ec000000 - eff00000'
+
+   If you want to set this boot option as default:
+
+   => setenv bootcmd 'run jffs2boot'
+   => saveenv
+
+   ...or for a single boot:
+
+   => run jffs2boot
+
+   You can login with user "root".

board/lego/ev3/readme.txt

@@ -0,0 +1,135 @@
+Lego Mindstorms EV3
+
+Intro
+=====
+
+This is the buildroot basic board support for the Lego Mindstorms EV3
+programmable brick. No support for sensors and drivers is provided for the
+moment.
+
+The Lego Mindstorms EV3 brick comprises a Texas Instruments AM1808 SoC, with
+an ARM 926EJ-S main processor running at 300 MHz.
+See:
+- https://en.wikipedia.org/wiki/Lego_Mindstorms_EV3
+- http://www.lego.com/en-us/mindstorms/products/ev3/31313-mindstorms-ev3/
+- http://www.ti.com/product/am1808
+
+The buildroot configuration uses the Linux kernel of the ev3dev project.
+See:
+- http://botbench.com/blog/2013/07/31/lego-mindstorms-ev3-source-code-available/
+- https://github.com/mindboards/ev3sources
+
+Note that the EV3 configuration uses gcc 4.7, as the boot is broken with gcc
+4.8.
+
+How it works
+============
+
+Boot process :
+--------------
+
+The u-boot on-board the EV3 brick has provision to boot a Linux kernel from the
+external µSD card. It will try to load a uImage from the first µSD card
+partition, which must be formatted with a FAT filesystem.
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+The lego_ev3_defconfig configuration provides basic support to boot on the Lego
+Mindstorms EV3 programmable brick:
+
+  $ make lego_ev3_defconfig
+
+Build everything
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    ├── rootfs.ext2
+    ├── rootfs.ext3 -> rootfs.ext2
+    └── uImage
+
+
+Prepare your SDcard
+===================
+
+The following µSD card layout is recommended:
+
+- First partition formated with a FAT filesystem, containing the uImage.
+- Second partition formatted as ext2 or ext3, containing the root filesystem.
+
+Create the SDcard partition table
+----------------------------------
+
+Determine the device associated to the SD card :
+
+  $ cat /proc/partitions
+
+Let's assume it is /dev/mmcblk0 :
+
+  $ sudo fdisk /dev/mmcblk0
+
+Delete all previous partitions by creating a new disklabel with 'o', then
+create the new partition table, using these options, pressing enter after each
+one:
+
+  * n p 1 2048 +10M t c
+  * n p 2 22528 +256M
+
+Using the 'p' option, the SD card's partition must look like this :
+
+Device          Boot  Start     End  Blocks  Id System
+/dev/mmcblk0p1         2048   22527   10240   c  W95 FAT32 (LBA)
+/dev/mmcblk0p2        22528  546815  262144  83  Linux
+
+Then write the partition table using 'w' and exit.
+
+Make partition one a DOS partition :
+
+  $ sudo mkfs.vfat /dev/mmcblk0p1
+
+Install the binaries to the SDcard
+----------------------------------
+
+Remember your binaries are located in output/images/, go inside that directory :
+
+  $ cd output/images
+
+Copy the Linux kernel:
+
+  $ sudo mkdir /mnt/sdcard
+  $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
+  $ sudo cp uImage /mnt/sdcard
+  $ sudo umount /mnt/sdcard
+
+Copy the rootfs :
+
+  $ sudo dd if=rootfs.ext3 of=/dev/mmcblk0p2 bs=1M
+  $ sync
+
+It's Done!
+
+Finish
+======
+
+Eject your µSD card, insert it in your Lego EV3, and power it up.
+
+To have a serial console, you will need a proper USB to Lego serial port
+adapter plugged into the EV3 sensors port 1.
+See:
+- http://botbench.com/blog/2013/08/15/ev3-creating-console-cable/
+- http://botbench.com/blog/2013/08/05/mindsensors-ev3-usb-console-adapter/
+
+The serial port config to use is 115200/8-N-1.

board/minnowboard-max/grub.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk0p2 rootwait console=tty0 console=ttyS0,115200
+}

board/minnowboard-max/linux-3.18.config

@@ -0,0 +1,47 @@
+CONFIG_NO_HZ=y
+CONFIG_SMP=y
+CONFIG_X86_INTEL_LPSS=y
+CONFIG_MATOM=y
+CONFIG_EFI=y
+CONFIG_PM_RUNTIME=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y
+CONFIG_X86_INTEL_PSTATE=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_IA32_EMULATION=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_R8169=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_DW=y
+CONFIG_I2C_I801=y
+CONFIG_I2C_DESIGNWARE_PLATFORM=y
+CONFIG_I2C_DESIGNWARE_PCI=y
+CONFIG_SPI=y
+CONFIG_SPI_PXA2XX=y
+CONFIG_SPI_DESIGNWARE=y
+CONFIG_PINCTRL_BAYTRAIL=y
+CONFIG_GPIOLIB=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_AGP=y
+CONFIG_DRM=y
+CONFIG_DRM_I915=y
+CONFIG_USB=y
+CONFIG_USB_XHCI_HCD=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_MMC_SDHCI_ACPI=y
+CONFIG_PWM=y
+CONFIG_PWM_LPSS=y
+CONFIG_EXT4_FS=y

board/minnowboard-max/post-build.sh

@@ -0,0 +1,2 @@
+#!/bin/sh
+cp board/minnowboard-max/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

board/minnowboard-max/readme.txt

@@ -0,0 +1,40 @@
+Prepare the SD card for the Minnow Board MAX
+============================================
+
+ 1. Partition the SD card with a GPT partition table
+
+    sudo cgdisk /dev/mmcblk0
+
+    Create two partitions:
+
+     a) First partition of a few dozens of megabytes, which will be
+        used to store the bootloader and the kernel image. Type must
+        be EF00 (EFI partition).
+
+     b) Second partition of any size, which will be used to store the
+        root filesystem. Type must be 8300 (Linux filesystem)
+
+ 2. Prepare the boot partition
+
+    We will format it, mount it, copy the EFI data generated by
+    Buildroot, and the kernel image.
+
+    sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
+    sudo mount /dev/mmcblk0p1 /mnt
+    sudo cp -a output/images/efi-part/* /mnt/
+    sudo cp output/images/bzImage /mnt/
+    sudo umount /mnt
+
+ 3. Prepare the root partition
+
+    We will format it, mount it, and extract the root filesystem.
+
+    sudo mkfs.ext4 -L root /dev/mmcblk0p2
+    sudo mount /dev/mmcblk0p2 /mnt
+    sudo tar -C /mnt -xf output/images/rootfs.tar
+    sudo umount /mnt
+
+ 4. Enjoy
+
+Additional information about this board can be found at
+http://www.minnowboard.org/ or http://elinux.org/Minnowboard:MinnowMax.

board/minnowboard/grub.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk0p2 rootwait console=ttyPCH0,115200
+}

board/minnowboard/linux-3.8.config

@@ -0,0 +1,172 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_RCU_FANOUT=32
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SMP=y
+CONFIG_MATOM=y
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_HZ_1000=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_PCH_PHUB=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_TUN=m
+CONFIG_PCH_GBE=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_PCH_UART=y
+CONFIG_SERIAL_PCH_UART_CONSOLE=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+CONFIG_HPET=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_EG20T=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_TOPCLIFF_PCH=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SCH=y
+CONFIG_GPIO_PCH=y
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_FB=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_USB=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_EG20T=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+CONFIG_MINNOWBOARD=y
+CONFIG_MINNOWBOARD_GPIO=m
+CONFIG_MINNOWBOARD_KEYS=m
+CONFIG_EFI_VARS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_TIMER_STATS=y
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y

board/minnowboard/post-build.sh

@@ -0,0 +1,2 @@
+#!/bin/sh
+cp board/minnowboard/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

board/minnowboard/readme.txt

@@ -0,0 +1,40 @@
+Prepare the SD card for the Minnow Board
+========================================
+
+ 1. Partition the SD card with a GPT partition table
+
+    sudo cgdisk /dev/mmcblk0
+
+    Create two partitions:
+
+     a) First partition of a few dozens of megabytes, which will be
+        used to store the bootloader and the kernel image. Type must
+        be EF00 (EFI partition).
+
+     b) Second partition of any size, which will be used to store the
+        root filesystem. Type must be 8300 (Linux filesystem)
+
+ 2. Prepare the boot partition
+
+    We will format it, mount it, copy the EFI data generated by
+    Buildroot, and the kernel image.
+
+    sudo mkfs.vfat -F 32 -n boot /dev/mmcblk0p1
+    sudo mount /dev/mmcblk0p1 /mnt
+    sudo cp -a output/images/efi-part/* /mnt/
+    sudo cp output/images/bzImage /mnt/
+    sudo umount /mnt
+
+ 3. Prepare the root partition
+
+    We will format it, mount it, and extract the root filesystem.
+
+    sudo mkfs.ext3 -L root /dev/mmcblk0p2
+    sudo mount /dev/mmcblk0p2 /mnt
+    sudo tar -C /mnt -xf output/images/rootfs.tar
+    sudo umount /mnt
+
+ 4. Enjoy
+
+Additional information about this board can be found at
+http://www.minnowboard.org/.

board/olimex/imx233_olinuxino/linux-3.18.config

@@ -1,17 +1,6 @@
 CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-# CONFIG_UTS_NS is not set
-# CONFIG_IPC_NS is not set
-# CONFIG_PID_NS is not set
-# CONFIG_NET_NS is not set
-CONFIG_RELAY=y
 CONFIG_PERF_EVENTS=y
 # CONFIG_COMPAT_BRK is not set
 CONFIG_MODULES=y
@@ -20,8 +9,6 @@ CONFIG_MODULE_UNLOAD=y
 CONFIG_MODULE_FORCE_UNLOAD=y
 CONFIG_MODVERSIONS=y
 CONFIG_BLK_DEV_INTEGRITY=y
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
 # CONFIG_ARCH_MULTI_V7 is not set
 CONFIG_ARCH_MXS=y
 # CONFIG_ARM_THUMB is not set
@@ -37,12 +24,6 @@ CONFIG_INET=y
 CONFIG_IP_PNP=y
 CONFIG_IP_PNP_DHCP=y
 CONFIG_SYN_COOKIES=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_IPV6 is not set
 CONFIG_CFG80211=y
 CONFIG_CFG80211_WEXT=y
 CONFIG_MAC80211=y
@@ -53,8 +34,6 @@ CONFIG_MTD=y
 CONFIG_MTD_CMDLINE_PARTS=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_DATAFLASH=y
-CONFIG_MTD_M25P80=y
-# CONFIG_M25PXX_USE_FAST_READ is not set
 CONFIG_MTD_SST25L=y
 CONFIG_MTD_NAND=y
 CONFIG_MTD_NAND_GPMI_NAND=y
@@ -86,7 +65,6 @@ CONFIG_INPUT_EVDEV=y
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
 # CONFIG_LEGACY_PTYS is not set
 # CONFIG_DEVKMEM is not set
@@ -126,16 +104,13 @@ CONFIG_SND_HRTIMER=y
 # CONFIG_SND_SPI is not set
 # CONFIG_SND_USB is not set
 CONFIG_SND_SOC=y
-CONFIG_SND_MXS_SOC_BUILTIN=y
 CONFIG_USB=y
 CONFIG_USB_EHCI_HCD=y
 CONFIG_USB_STORAGE=y
 CONFIG_USB_CHIPIDEA=y
 CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
 CONFIG_USB_MXS_PHY=y
 CONFIG_MMC=y
-CONFIG_MMC_UNSAFE_RESUME=y
 CONFIG_MMC_MXS=y
 CONFIG_LEDS_CLASS=y
 CONFIG_LEDS_GPIO=y
@@ -170,7 +145,7 @@ CONFIG_KEYS=y
 CONFIG_CRYPTO_DEFLATE=y
 CONFIG_CRYPTO_LZO=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
-CONFIG_CRYPTO_DEV_DCP=y
+CONFIG_CRYPTO_DEV_MXS_DCP=y
 CONFIG_CRC_CCITT=y
 CONFIG_CRC_ITU_T=y
 CONFIG_CRC7=m

board/qemu/aarch64-virt/linux-3.18.config

@@ -0,0 +1,56 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_FHANDLE=y
+CONFIG_NO_HZ_IDLE=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_TASKSTATS=y
+CONFIG_SCHED_AUTOGROUP=y
+CONFIG_PROFILING=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_BLK_DEV_BSGLIB=y
+CONFIG_ARCH_VEXPRESS=y
+CONFIG_SMP=y
+CONFIG_TRANSPARENT_HUGEPAGE=y
+CONFIG_BINFMT_MISC=y
+CONFIG_COMPAT=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_DIAG=y
+CONFIG_UNIX=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_BRIDGE=m
+CONFIG_NET_SCHED=y
+CONFIG_VSOCKETS=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_VIRTIO_BLK=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_SCSI_CONSTANTS=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_SCSI_VIRTIO=y
+CONFIG_ATA=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=y
+CONFIG_MACVLAN=y
+CONFIG_VIRTIO_NET=y
+CONFIG_NLMON=y
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_VIRTIO_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_HW_RANDOM_VIRTIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_VIRTIO_MMIO=y
+CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES=y
+CONFIG_MAILBOX=y
+CONFIG_PL320_MBOX=y
+CONFIG_EXT4_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y

board/qemu/aarch64-virt/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+  qemu-system-aarch64 -M virt -cpu cortex-a57 -nographic -smp 1 -kernel output/images/Image -append "console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0
+
+The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.2.0

board/qemu/arm-nuri/readme.txt

@@ -7,4 +7,4 @@ graphical window is the framebuffer.
 
 Startup time is slow because of the SMP CPU emulation so be patient.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/arm-versatile/linux-3.18.config

@@ -1,5 +1,3 @@
-CONFIG_ARCH_VERSATILE=y
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=14
@@ -7,16 +5,14 @@ CONFIG_BLK_DEV_INITRD=y
 CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_ARCH_VERSATILE=y
 CONFIG_MACH_VERSATILE_AB=y
 CONFIG_PCI=y
 CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_LEDS=y
-CONFIG_LEDS_CPU=y
 CONFIG_ZBOOT_ROM_TEXT=0x0
 CONFIG_ZBOOT_ROM_BSS=0x0
 CONFIG_CMDLINE="root=1f03 mem=32M"
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -27,24 +23,22 @@ CONFIG_IP_PNP_BOOTP=y
 # CONFIG_INET_DIAG is not set
 # CONFIG_IPV6 is not set
 CONFIG_MTD=y
-CONFIG_MTD_PARTITIONS=y
 CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
 CONFIG_MTD_BLOCK=y
 CONFIG_MTD_CFI=y
 CONFIG_MTD_CFI_ADV_OPTIONS=y
 CONFIG_MTD_CFI_INTELEXT=y
 CONFIG_MTD_PHYSMAP=y
 CONFIG_BLK_DEV_RAM=y
+CONFIG_EEPROM_LEGACY=m
 CONFIG_SCSI=y
 CONFIG_BLK_DEV_SD=y
 CONFIG_SCSI_SYM53C8XX_2=y
-CONFIG_EEPROM_LEGACY=m
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_SMC91X=y
 # CONFIG_SERIO_SERPORT is not set
 CONFIG_SERIO_AMBAKMI=y
+CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_SERIAL_8250=m
 CONFIG_SERIAL_8250_EXTENDED=y
 CONFIG_SERIAL_8250_MANY_PORTS=y
@@ -52,15 +46,12 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y
 CONFIG_SERIAL_8250_RSA=y
 CONFIG_SERIAL_AMBA_PL011=y
 CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_LEGACY_PTY_COUNT=16
 CONFIG_I2C=y
 CONFIG_I2C_CHARDEV=m
 # CONFIG_HWMON is not set
 CONFIG_FB=y
 CONFIG_FB_ARMCLCD=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_ACORN_8x8=y
 CONFIG_SOUND=y
 CONFIG_SND=m
 CONFIG_SND_MIXER_OSS=m
@@ -68,22 +59,23 @@ CONFIG_SND_PCM_OSS=m
 CONFIG_SND_ARMAACI=m
 CONFIG_MMC=y
 CONFIG_MMC_ARMMMCI=m
-CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_JFFS2_FS=y
 CONFIG_CRAMFS=y
 CONFIG_MINIX_FS=y
 CONFIG_ROMFS_FS=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
 CONFIG_NFSD=y
 CONFIG_NFSD_V3=y
-CONFIG_PARTITION_ADVANCED=y
 CONFIG_NLS_CODEPAGE_850=m
 CONFIG_NLS_ISO8859_1=m
 CONFIG_MAGIC_SYSRQ=y
 CONFIG_DEBUG_KERNEL=y
 CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_ERRORS=y
 CONFIG_DEBUG_LL=y
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y

board/qemu/arm-versatile/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/arm-vexpress/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/microblazebe-mmu/linux-3.18.config

@@ -1,16 +1,10 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
@@ -20,6 +14,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_OPT_LIB_ASM=y
 CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
@@ -36,11 +31,9 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_XILINX_EMACLITE=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
@@ -50,19 +43,14 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SPINLOCK=y
 CONFIG_EARLY_PRINTK=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set

board/qemu/microblazebe-mmu/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/microblazebe-mmu/system.dts

@@ -1,367 +0,0 @@
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				device_type = "network";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;

board/qemu/microblazebe-mmu/xilinx-xemaclite.patch

@@ -0,0 +1,11 @@
+diff -Nur linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-03-31 05:40:15.000000000 +0200
++++ linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-04-11 22:53:42.000000000 +0200
+@@ -1249,6 +1249,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },

board/qemu/microblazeel-mmu/linux-3.18.config

@@ -1,16 +1,10 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
-CONFIG_SYSFS_DEPRECATED_V2=y
 CONFIG_BLK_DEV_INITRD=y
 CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
-CONFIG_INITRAMFS_COMPRESSION_GZIP=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
 CONFIG_EXPERT=y
 CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-# CONFIG_HOTPLUG is not set
 # CONFIG_BASE_FULL is not set
 # CONFIG_FUTEX is not set
 # CONFIG_EPOLL is not set
@@ -20,6 +14,7 @@ CONFIG_SLAB=y
 CONFIG_MODULES=y
 CONFIG_MODULE_UNLOAD=y
 # CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
 CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
 CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
 CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
@@ -35,11 +30,9 @@ CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_INET_LRO is not set
 # CONFIG_IPV6 is not set
-CONFIG_PROC_DEVICETREE=y
 CONFIG_BLK_DEV_RAM=y
 CONFIG_BLK_DEV_RAM_SIZE=8192
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
 CONFIG_XILINX_EMACLITE=y
 # CONFIG_INPUT is not set
 # CONFIG_SERIO is not set
@@ -49,19 +42,16 @@ CONFIG_SERIAL_UARTLITE_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
 # CONFIG_DNOTIFY is not set
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_CIFS=y
 CONFIG_CIFS_STATS=y
 CONFIG_CIFS_STATS2=y
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DEBUG_SLAB=y
-CONFIG_DEBUG_SPINLOCK=y
 CONFIG_DEBUG_INFO=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_DEBUG_SLAB=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SPINLOCK=y
 CONFIG_EARLY_PRINTK=y
+CONFIG_CRYPTO_CRC32C=y
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC16=y

board/qemu/microblazeel-mmu/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/microblazeel-mmu/system.dts

@@ -1,367 +0,0 @@
-/*
- * Device Tree Generator version: 1.1
- *
- * (C) Copyright 2007-2008 Xilinx, Inc.
- * (C) Copyright 2007-2009 Michal Simek
- *
- * Michal SIMEK <monstr@monstr.eu>
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
- * CAUTION: This file is automatically generated by libgen.
- * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
- *
- * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
- */
-
-/dts-v1/;
-/ {
-	#address-cells = <1>;
-	#size-cells = <1>;
-	compatible = "xlnx,microblaze";
-	hard-reset-gpios = <&LEDs_8Bit 2 1>;
-	model = "testing";
-	DDR2_SDRAM: memory@90000000 {
-		device_type = "memory";
-		reg = < 0x90000000 0x10000000 >;
-	} ;
-	aliases {
-		ethernet0 = &Hard_Ethernet_MAC;
-		serial0 = &RS232_Uart_1;
-	} ;
-	chosen {
-		bootargs = "console=ttyUL0,115200 highres=on";
-		linux,stdout-path = "/plb@0/serial@84000000";
-	} ;
-	cpus {
-		#address-cells = <1>;
-		#cpus = <0x1>;
-		#size-cells = <0>;
-		microblaze_0: cpu@0 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,microblaze-7.10.d";
-			d-cache-baseaddr = <0x90000000>;
-			d-cache-highaddr = <0x9fffffff>;
-			d-cache-line-size = <0x10>;
-			d-cache-size = <0x2000>;
-			device_type = "cpu";
-			i-cache-baseaddr = <0x90000000>;
-			i-cache-highaddr = <0x9fffffff>;
-			i-cache-line-size = <0x10>;
-			i-cache-size = <0x2000>;
-			model = "microblaze,7.10.d";
-			reg = <0>;
-			timebase-frequency = <125000000>;
-			xlnx,addr-tag-bits = <0xf>;
-			xlnx,allow-dcache-wr = <0x1>;
-			xlnx,allow-icache-wr = <0x1>;
-			xlnx,area-optimized = <0x0>;
-			xlnx,cache-byte-size = <0x2000>;
-			xlnx,d-lmb = <0x1>;
-			xlnx,d-opb = <0x0>;
-			xlnx,d-plb = <0x1>;
-			xlnx,data-size = <0x20>;
-			xlnx,dcache-addr-tag = <0xf>;
-			xlnx,dcache-always-used = <0x1>;
-			xlnx,dcache-byte-size = <0x2000>;
-			xlnx,dcache-line-len = <0x4>;
-			xlnx,dcache-use-fsl = <0x1>;
-			xlnx,debug-enabled = <0x1>;
-			xlnx,div-zero-exception = <0x1>;
-			xlnx,dopb-bus-exception = <0x0>;
-			xlnx,dynamic-bus-sizing = <0x1>;
-			xlnx,edge-is-positive = <0x1>;
-			xlnx,family = "virtex5";
-			xlnx,endianness = <0x1>;
-			xlnx,fpu-exception = <0x1>;
-			xlnx,fsl-data-size = <0x20>;
-			xlnx,fsl-exception = <0x0>;
-			xlnx,fsl-links = <0x0>;
-			xlnx,i-lmb = <0x1>;
-			xlnx,i-opb = <0x0>;
-			xlnx,i-plb = <0x1>;
-			xlnx,icache-always-used = <0x1>;
-			xlnx,icache-line-len = <0x4>;
-			xlnx,icache-use-fsl = <0x1>;
-			xlnx,ill-opcode-exception = <0x1>;
-			xlnx,instance = "microblaze_0";
-			xlnx,interconnect = <0x1>;
-			xlnx,interrupt-is-edge = <0x0>;
-			xlnx,iopb-bus-exception = <0x0>;
-			xlnx,mmu-dtlb-size = <0x4>;
-			xlnx,mmu-itlb-size = <0x2>;
-			xlnx,mmu-tlb-access = <0x3>;
-			xlnx,mmu-zones = <0x10>;
-			xlnx,number-of-pc-brk = <0x1>;
-			xlnx,number-of-rd-addr-brk = <0x0>;
-			xlnx,number-of-wr-addr-brk = <0x0>;
-			xlnx,opcode-0x0-illegal = <0x1>;
-			xlnx,pvr = <0x2>;
-			xlnx,pvr-user1 = <0x0>;
-			xlnx,pvr-user2 = <0x0>;
-			xlnx,reset-msr = <0x0>;
-			xlnx,sco = <0x0>;
-			xlnx,unaligned-exceptions = <0x1>;
-			xlnx,use-barrel = <0x1>;
-			xlnx,use-dcache = <0x1>;
-			xlnx,use-div = <0x1>;
-			xlnx,use-ext-brk = <0x1>;
-			xlnx,use-ext-nm-brk = <0x1>;
-			xlnx,use-extended-fsl-instr = <0x0>;
-			xlnx,use-fpu = <0x2>;
-			xlnx,use-hw-mul = <0x2>;
-			xlnx,use-icache = <0x1>;
-			xlnx,use-interrupt = <0x1>;
-			xlnx,use-mmu = <0x3>;
-			xlnx,use-msr-instr = <0x1>;
-			xlnx,use-pcmp-instr = <0x1>;
-		} ;
-	} ;
-	mb_plb: plb@0 {
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
-		ranges ;
-		FLASH: flash@a0000000 {
-			bank-width = <2>;
-			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
-			reg = < 0xa0000000 0x2000000 >;
-			xlnx,family = "virtex5";
-			xlnx,include-datawidth-matching-0 = <0x1>;
-			xlnx,include-datawidth-matching-1 = <0x0>;
-			xlnx,include-datawidth-matching-2 = <0x0>;
-			xlnx,include-datawidth-matching-3 = <0x0>;
-			xlnx,include-negedge-ioregs = <0x0>;
-			xlnx,include-plb-ipif = <0x1>;
-			xlnx,include-wrbuf = <0x1>;
-			xlnx,max-mem-width = <0x10>;
-			xlnx,mch-native-dwidth = <0x20>;
-			xlnx,mch-plb-clk-period-ps = <0x1f40>;
-			xlnx,mch-splb-awidth = <0x20>;
-			xlnx,mch0-accessbuf-depth = <0x10>;
-			xlnx,mch0-protocol = <0x0>;
-			xlnx,mch0-rddatabuf-depth = <0x10>;
-			xlnx,mch1-accessbuf-depth = <0x10>;
-			xlnx,mch1-protocol = <0x0>;
-			xlnx,mch1-rddatabuf-depth = <0x10>;
-			xlnx,mch2-accessbuf-depth = <0x10>;
-			xlnx,mch2-protocol = <0x0>;
-			xlnx,mch2-rddatabuf-depth = <0x10>;
-			xlnx,mch3-accessbuf-depth = <0x10>;
-			xlnx,mch3-protocol = <0x0>;
-			xlnx,mch3-rddatabuf-depth = <0x10>;
-			xlnx,mem0-width = <0x10>;
-			xlnx,mem1-width = <0x20>;
-			xlnx,mem2-width = <0x20>;
-			xlnx,mem3-width = <0x20>;
-			xlnx,num-banks-mem = <0x1>;
-			xlnx,num-channels = <0x0>;
-			xlnx,priority-mode = <0x0>;
-			xlnx,synch-mem-0 = <0x0>;
-			xlnx,synch-mem-1 = <0x0>;
-			xlnx,synch-mem-2 = <0x0>;
-			xlnx,synch-mem-3 = <0x0>;
-			xlnx,synch-pipedelay-0 = <0x2>;
-			xlnx,synch-pipedelay-1 = <0x2>;
-			xlnx,synch-pipedelay-2 = <0x2>;
-			xlnx,synch-pipedelay-3 = <0x2>;
-			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
-			xlnx,tavdv-ps-mem-1 = <0x3a98>;
-			xlnx,tavdv-ps-mem-2 = <0x3a98>;
-			xlnx,tavdv-ps-mem-3 = <0x3a98>;
-			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
-			xlnx,tcedv-ps-mem-1 = <0x3a98>;
-			xlnx,tcedv-ps-mem-2 = <0x3a98>;
-			xlnx,tcedv-ps-mem-3 = <0x3a98>;
-			xlnx,thzce-ps-mem-0 = <0x88b8>;
-			xlnx,thzce-ps-mem-1 = <0x1b58>;
-			xlnx,thzce-ps-mem-2 = <0x1b58>;
-			xlnx,thzce-ps-mem-3 = <0x1b58>;
-			xlnx,thzoe-ps-mem-0 = <0x1b58>;
-			xlnx,thzoe-ps-mem-1 = <0x1b58>;
-			xlnx,thzoe-ps-mem-2 = <0x1b58>;
-			xlnx,thzoe-ps-mem-3 = <0x1b58>;
-			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
-			xlnx,tlzwe-ps-mem-1 = <0x0>;
-			xlnx,tlzwe-ps-mem-2 = <0x0>;
-			xlnx,tlzwe-ps-mem-3 = <0x0>;
-			xlnx,twc-ps-mem-0 = <0x2af8>;
-			xlnx,twc-ps-mem-1 = <0x3a98>;
-			xlnx,twc-ps-mem-2 = <0x3a98>;
-			xlnx,twc-ps-mem-3 = <0x3a98>;
-			xlnx,twp-ps-mem-0 = <0x11170>;
-			xlnx,twp-ps-mem-1 = <0x2ee0>;
-			xlnx,twp-ps-mem-2 = <0x2ee0>;
-			xlnx,twp-ps-mem-3 = <0x2ee0>;
-			xlnx,xcl0-linesize = <0x4>;
-			xlnx,xcl0-writexfer = <0x1>;
-			xlnx,xcl1-linesize = <0x4>;
-			xlnx,xcl1-writexfer = <0x1>;
-			xlnx,xcl2-linesize = <0x4>;
-			xlnx,xcl2-writexfer = <0x1>;
-			xlnx,xcl3-linesize = <0x4>;
-			xlnx,xcl3-writexfer = <0x1>;
-		} ;
-		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,compound";
-			ranges ;
-			ethernet@81c00000 {
-				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
-				device_type = "network";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 5 2 >;
-				llink-connected = <&PIM3>;
-				local-mac-address = [ 00 0a 35 00 00 00 ];
-				reg = < 0x81c00000 0x40 >;
-				xlnx,bus2core-clk-ratio = <0x1>;
-				xlnx,phy-type = <0x1>;
-				xlnx,phyaddr = <0x1>;
-				xlnx,rxcsum = <0x0>;
-				xlnx,rxfifo = <0x1000>;
-				xlnx,temac-type = <0x0>;
-				xlnx,txcsum = <0x0>;
-				xlnx,txfifo = <0x1000>;
-			} ;
-		} ;
-		IIC_EEPROM: i2c@81600000 {
-			compatible = "xlnx,xps-iic-2.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 6 2 >;
-			reg = < 0x81600000 0x10000 >;
-			xlnx,clk-freq = <0x7735940>;
-			xlnx,family = "virtex5";
-			xlnx,gpo-width = <0x1>;
-			xlnx,iic-freq = <0x186a0>;
-			xlnx,scl-inertial-delay = <0x0>;
-			xlnx,sda-inertial-delay = <0x0>;
-			xlnx,ten-bit-adr = <0x0>;
-		} ;
-		LEDs_8Bit: gpio@81400000 {
-			compatible = "xlnx,xps-gpio-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 7 2 >;
-			reg = < 0x81400000 0x10000 >;
-			xlnx,all-inputs = <0x0>;
-			xlnx,all-inputs-2 = <0x0>;
-			xlnx,dout-default = <0x0>;
-			xlnx,dout-default-2 = <0x0>;
-			xlnx,family = "virtex5";
-			xlnx,gpio-width = <0x8>;
-			xlnx,interrupt-present = <0x1>;
-			xlnx,is-bidir = <0x1>;
-			xlnx,is-bidir-2 = <0x1>;
-			xlnx,is-dual = <0x0>;
-			xlnx,tri-default = <0xffffffff>;
-			xlnx,tri-default-2 = <0xffffffff>;
-			#gpio-cells = <2>;
-			gpio-controller;
-		} ;
-
-		gpio-leds {
-			compatible = "gpio-leds";
-
-			heartbeat {
-				label = "Heartbeat";
-				gpios = <&LEDs_8Bit 4 1>;
-				linux,default-trigger = "heartbeat";
-			};
-
-			yellow {
-				label = "Yellow";
-				gpios = <&LEDs_8Bit 5 1>;
-			};
-
-			red {
-				label = "Red";
-				gpios = <&LEDs_8Bit 6 1>;
-			};
-
-			green {
-				label = "Green";
-				gpios = <&LEDs_8Bit 7 1>;
-			};
-		} ;
-		RS232_Uart_1: serial@84000000 {
-			clock-frequency = <125000000>;
-			compatible = "xlnx,xps-uartlite-1.00.a";
-			current-speed = <115200>;
-			device_type = "serial";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 8 0 >;
-			port-number = <0>;
-			reg = < 0x84000000 0x10000 >;
-			xlnx,baudrate = <0x1c200>;
-			xlnx,data-bits = <0x8>;
-			xlnx,family = "virtex5";
-			xlnx,odd-parity = <0x0>;
-			xlnx,use-parity = <0x0>;
-		} ;
-		SysACE_CompactFlash: sysace@83600000 {
-			compatible = "xlnx,xps-sysace-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 4 2 >;
-			reg = < 0x83600000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,mem-width = <0x10>;
-		} ;
-		debug_module: debug@84400000 {
-			compatible = "xlnx,mdm-1.00.d";
-			reg = < 0x84400000 0x10000 >;
-			xlnx,family = "virtex5";
-			xlnx,interconnect = <0x1>;
-			xlnx,jtag-chain = <0x2>;
-			xlnx,mb-dbg-ports = <0x1>;
-			xlnx,uart-width = <0x8>;
-			xlnx,use-uart = <0x1>;
-			xlnx,write-fsl-ports = <0x0>;
-		} ;
-		mpmc@90000000 {
-			#address-cells = <1>;
-			#size-cells = <1>;
-			compatible = "xlnx,mpmc-4.02.a";
-			ranges ;
-			PIM3: sdma@84600180 {
-				compatible = "xlnx,ll-dma-1.00.a";
-				interrupt-parent = <&xps_intc_0>;
-				interrupts = < 2 2 1 2 >;
-				reg = < 0x84600180 0x80 >;
-			} ;
-		} ;
-		xps_intc_0: interrupt-controller@81800000 {
-			#interrupt-cells = <0x2>;
-			compatible = "xlnx,xps-intc-1.00.a";
-			interrupt-controller ;
-			reg = < 0x81800000 0x10000 >;
-			xlnx,kind-of-intr = <0x100>;
-			xlnx,num-intr-inputs = <0x9>;
-		} ;
-		xps_timer_1: timer@83c00000 {
-			compatible = "xlnx,xps-timer-1.00.a";
-			interrupt-parent = <&xps_intc_0>;
-			interrupts = < 3 2 >;
-			reg = < 0x83c00000 0x10000 >;
-			xlnx,count-width = <0x20>;
-			xlnx,family = "virtex5";
-			xlnx,gen0-assert = <0x1>;
-			xlnx,gen1-assert = <0x1>;
-			xlnx,one-timer-only = <0x0>;
-			xlnx,trig0-assert = <0x1>;
-			xlnx,trig1-assert = <0x1>;
-		} ;
-	} ;
-}  ;

board/qemu/microblazeel-mmu/xilinx-xemaclite.patch

@@ -0,0 +1,11 @@
+diff -Nur linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-03-31 05:40:15.000000000 +0200
++++ linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-04-11 22:53:42.000000000 +0200
+@@ -1249,6 +1249,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },

board/qemu/mips-malta/linux-3.18.config

@@ -1,21 +1,15 @@
 CONFIG_MIPS_MALTA=y
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HZ_100=y
+CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_RELAY=y
 CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -24,7 +18,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PCI=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -38,18 +31,13 @@ CONFIG_IP_PNP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_PIIX=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -59,18 +47,14 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_QUOTA=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips-malta/readme.txt

@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/mips64-malta/linux-3.18.config

@@ -55,5 +55,6 @@ CONFIG_FB_CIRRUS=y
 CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y

board/qemu/mips64-malta/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/mips64el-malta/linux-3.18.config

@@ -56,5 +56,6 @@ CONFIG_FB_CIRRUS=y
 CONFIG_EXT4_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y

board/qemu/mips64el-malta/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/mipsel-malta/linux-3.18.config

@@ -2,21 +2,15 @@ CONFIG_MIPS_MALTA=y
 CONFIG_CPU_LITTLE_ENDIAN=y
 CONFIG_CPU_MIPS32_R2=y
 CONFIG_MIPS_MT_SMP=y
+CONFIG_NR_CPUS=2
+CONFIG_HZ_100=y
+CONFIG_SYSVIPC=y
 CONFIG_NO_HZ=y
 CONFIG_HIGH_RES_TIMERS=y
-CONFIG_HZ_100=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SYSVIPC=y
 CONFIG_LOG_BUF_SHIFT=15
-CONFIG_SYSFS_DEPRECATED_V2=y
-CONFIG_RELAY=y
 CONFIG_NAMESPACES=y
-CONFIG_UTS_NS=y
-CONFIG_IPC_NS=y
-CONFIG_PID_NS=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_RELAY=y
 CONFIG_EMBEDDED=y
-# CONFIG_SYSCTL_SYSCALL is not set
 # CONFIG_COMPAT_BRK is not set
 CONFIG_SLAB=y
 CONFIG_MODULES=y
@@ -25,7 +19,6 @@ CONFIG_MODVERSIONS=y
 CONFIG_MODULE_SRCVERSION_ALL=y
 # CONFIG_BLK_DEV_BSG is not set
 CONFIG_PCI=y
-CONFIG_PM=y
 CONFIG_NET=y
 CONFIG_PACKET=y
 CONFIG_UNIX=y
@@ -39,18 +32,13 @@ CONFIG_IP_PNP=y
 # CONFIG_IPV6 is not set
 # CONFIG_WIRELESS is not set
 CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-# CONFIG_MISC_DEVICES is not set
 CONFIG_IDE=y
 CONFIG_BLK_DEV_IDECD=y
 CONFIG_IDE_GENERIC=y
 CONFIG_BLK_DEV_GENERIC=y
 CONFIG_BLK_DEV_PIIX=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_PCNET32=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -60,18 +48,14 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_FB=y
 CONFIG_FB_CIRRUS=y
 # CONFIG_VGA_CONSOLE is not set
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_QUOTA=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
 CONFIG_ROOT_NFS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mipsel-malta/readme.txt

@@ -6,4 +6,4 @@ The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/powerpc-g3beige/linux-3.12.config

@@ -1,86 +0,0 @@
-CONFIG_ALTIVEC=y
-CONFIG_EXPERIMENTAL=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_COMPAT_BRK=y
-CONFIG_SLAB=y
-CONFIG_LBDAF=y
-CONFIG_PPC_PMAC=y
-CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
-CONFIG_PPC601_SYNC_FIX=y
-CONFIG_HIGHMEM=y
-CONFIG_NO_HZ=y
-CONFIG_BINFMT_ELF=y
-CONFIG_PROC_DEVICETREE=y
-CONFIG_PM=y
-CONFIG_SECCOMP=y
-CONFIG_PCCARD=y
-CONFIG_PCMCIA=y
-CONFIG_PCMCIA_LOAD_CIS=y
-CONFIG_PCMCIA_IOCTL=y
-CONFIG_YENTA=y
-CONFIG_ADVANCED_OPTIONS=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_PACKET_MMAP=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_INET_LRO=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_CONNECTOR=y
-CONFIG_PROC_EVENTS=y
-CONFIG_BLK_DEV=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_IDE=y
-CONFIG_IDE_GD=y
-CONFIG_IDE_GD_ATA=y
-CONFIG_BLK_DEV_IDECD=y
-CONFIG_IDE_PROC_FS=y
-CONFIG_BLK_DEV_CMD64X=y
-CONFIG_BLK_DEV_IDE_PMAC=y
-CONFIG_IEEE1394=y
-CONFIG_IEEE1394_OHCI1394=y
-CONFIG_IEEE1394_ETH1394=y
-CONFIG_IEEE1394_RAWIO=y
-CONFIG_IEEE1394_VIDEO1394=y
-CONFIG_IEEE1394_DV1394=y
-CONFIG_MACINTOSH_DRIVERS=y
-CONFIG_ADB=y
-CONFIG_ADB_CUDA=y
-CONFIG_ADB_PMU=y
-CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_MACE=y
-CONFIG_BMAC=y
-CONFIG_HAPPYMEAL=y
-CONFIG_SUNGEM=y
-CONFIG_CASSINI=y
-CONFIG_NET_PCI=y
-CONFIG_PCNET32=y
-CONFIG_NE2K_PCI=y
-CONFIG_8139CP=y
-CONFIG_8139TOO=y
-CONFIG_8139TOO_PIO=y
-CONFIG_SERIO=y
-CONFIG_SERIAL_PMACZILOG=y
-CONFIG_SERIAL_PMACZILOG_TTYS=y
-CONFIG_SERIAL_PMACZILOG_CONSOLE=y
-CONFIG_HW_RANDOM=y
-CONFIG_SSB=y
-CONFIG_SSB_PCIHOST=y
-CONFIG_SSB_PCMCIAHOST=y
-CONFIG_SSB_DRIVER_PCICORE=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_DNOTIFY=y
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-CONFIG_PROC_KCORE=y
-CONFIG_TMPFS=y
-CONFIG_MISC_FILESYSTEMS=y
-CONFIG_SQUASHFS=y
-CONFIG_LIBCRC32C=y
-CONFIG_BOOTX_TEXT=y
-CONFIG_CRYPTO_HW=y

board/qemu/ppc-g3beige/linux-3.18.config

@@ -0,0 +1,46 @@
+CONFIG_ALTIVEC=y
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_PPC601_SYNC_FIX=y
+CONFIG_HIGHMEM=y
+CONFIG_PCCARD=y
+CONFIG_YENTA=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_PCNET32=y
+CONFIG_MACE=y
+CONFIG_BMAC=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_HAPPYMEAL=y
+CONFIG_SUNGEM=y
+CONFIG_CASSINI=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_SSB=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_EXT4_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_SQUASHFS=y
+CONFIG_LIBCRC32C=y
+CONFIG_BOOTX_TEXT=y

board/qemu/ppc-g3beige/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/ppc-mpc8544ds/readme.txt

@@ -4,4 +4,5 @@ Run the emulation with:
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.0.2
+QEMU 2.1.x and 2.2.x are known broken.

board/qemu/ppc-virtex-ml507/readme.txt

@@ -1,8 +1,7 @@
 Run the emulation with:
 
- cp output/images/virtex440-ml507.dtb ppc.dtb
- qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0"
+ qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0" -dtb output/images/virtex440-ml507.dtb
 
 The login prompt will appear in the terminal that started Qemu.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/ppc64-pseries/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+ qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append 'console=hvc0 root=/dev/sda' -drive file=output/images/rootfs.ext2,if=scsi,index=0 -serial stdio -display curses
+
+The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.2.0

board/qemu/sh4-r2d/linux-3.18.config

@@ -1,11 +1,7 @@
-CONFIG_EXPERIMENTAL=y
 CONFIG_SYSVIPC=y
 CONFIG_IKCONFIG=y
 CONFIG_IKCONFIG_PROC=y
 CONFIG_LOG_BUF_SHIFT=14
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
-# CONFIG_SYSCTL_SYSCALL is not set
 CONFIG_SLAB=y
 CONFIG_PROFILING=y
 CONFIG_OPROFILE=y
@@ -34,18 +30,12 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_PATA_PLATFORM=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_8139CP=y
-CONFIG_8139TOO=y
-# CONFIG_8139TOO_PIO is not set
 # CONFIG_WLAN is not set
-CONFIG_INPUT_FF_MEMLESS=m
 # CONFIG_INPUT_MOUSEDEV is not set
 # CONFIG_INPUT_KEYBOARD is not set
 # CONFIG_INPUT_MOUSE is not set
 # CONFIG_SERIO is not set
-CONFIG_VT_HW_CONSOLE_BINDING=y
 CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_SH_SCI=y
 CONFIG_SERIAL_SH_SCI_CONSOLE=y
@@ -53,53 +43,29 @@ CONFIG_HW_RANDOM=y
 CONFIG_SPI=y
 CONFIG_SPI_SH_SCI=y
 CONFIG_MFD_SM501=y
-CONFIG_VIDEO_OUTPUT_CONTROL=m
 CONFIG_FB=y
 CONFIG_FB_SH_MOBILE_LCDC=m
 CONFIG_FB_SH_MOBILE_HDMI=m
 CONFIG_FB_SM501=y
 CONFIG_FRAMEBUFFER_CONSOLE=y
 CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-# CONFIG_LOGO_LINUX_CLUT224 is not set
-# CONFIG_LOGO_SUPERH_MONO is not set
-# CONFIG_LOGO_SUPERH_VGA16 is not set
 CONFIG_SOUND=y
-CONFIG_SND=m
 CONFIG_SND_YMFPCI=m
 CONFIG_SOUND_PRIME=m
-CONFIG_HID_A4TECH=y
-CONFIG_HID_APPLE=y
-CONFIG_HID_BELKIN=y
-CONFIG_HID_CHERRY=y
-CONFIG_HID_CHICONY=y
-CONFIG_HID_CYPRESS=y
-CONFIG_HID_EZKEY=y
-CONFIG_HID_GYRATION=y
-CONFIG_HID_LOGITECH=y
-CONFIG_HID_MICROSOFT=y
-CONFIG_HID_MONTEREY=y
-CONFIG_HID_PANTHERLORD=y
-CONFIG_HID_PETALYNX=y
-CONFIG_HID_SAMSUNG=y
-CONFIG_HID_SONY=y
-CONFIG_HID_SUNPLUS=y
 CONFIG_USB=y
 CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
 CONFIG_USB_OHCI_HCD=y
 CONFIG_USB_STORAGE=y
-CONFIG_USB_LIBUSUAL=y
 CONFIG_RTC_CLASS=y
 CONFIG_RTC_DRV_R9701=y
-CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
 CONFIG_MSDOS_FS=y
 CONFIG_VFAT_FS=y
 CONFIG_PROC_KCORE=y
 CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 CONFIG_MINIX_FS=y
 CONFIG_NLS_CODEPAGE_932=y
 CONFIG_DEBUG_FS=y
-# CONFIG_RCU_CPU_STALL_DETECTOR is not set
 # CONFIG_CRYPTO_ANSI_CPRNG is not set
 CONFIG_CRC_T10DIF=y

board/qemu/sh4-r2d/readme.txt

@@ -5,4 +5,4 @@ Run the emulation with:
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/sparc-ss10/linux-3.18.config

@@ -0,0 +1,95 @@
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_SUN_OPENPROMFS=m
+CONFIG_BINFMT_MISC=m
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=m
+CONFIG_NET_KEY=m
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_INET_AH=y
+CONFIG_INET_ESP=y
+CONFIG_INET_IPCOMP=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET6_AH=m
+CONFIG_INET6_ESP=m
+CONFIG_INET6_IPCOMP=m
+CONFIG_IPV6_TUNNEL=m
+CONFIG_NET_PKTGEN=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_BLK_DEV_LOOP=m
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=m
+CONFIG_CHR_DEV_SG=m
+CONFIG_SCSI_QLOGICPTI=m
+CONFIG_SCSI_SUNESP=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_SUNLANCE=y
+CONFIG_HAPPYMEAL=m
+CONFIG_SUNBMAC=m
+CONFIG_SUNQE=m
+# CONFIG_WLAN is not set
+CONFIG_INPUT_JOYDEV=m
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+CONFIG_KEYBOARD_ATKBD=m
+CONFIG_KEYBOARD_SUNKBD=m
+CONFIG_MOUSE_PS2=m
+CONFIG_MOUSE_SERIAL=m
+CONFIG_SERIO=m
+CONFIG_SERIAL_SUNZILOG=y
+CONFIG_SERIAL_SUNZILOG_CONSOLE=y
+CONFIG_SERIAL_SUNSU=y
+CONFIG_SERIAL_SUNSU_CONSOLE=y
+CONFIG_SPI=y
+CONFIG_SPI_XILINX=m
+CONFIG_SUN_OPENPROMIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=m
+CONFIG_ISO9660_FS=m
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_ROMFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_SCHED_DEBUG is not set
+CONFIG_KGDB=y
+CONFIG_KGDB_TESTS=y
+CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_ECB=m
+CONFIG_CRYPTO_PCBC=m
+CONFIG_CRYPTO_MD4=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
+CONFIG_CRYPTO_SHA256=m
+CONFIG_CRYPTO_SHA512=m
+CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_BLOWFISH=m
+CONFIG_CRYPTO_CAST5=m
+CONFIG_CRYPTO_CAST6=m
+CONFIG_CRYPTO_SERPENT=m
+CONFIG_CRYPTO_TWOFISH=m
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+CONFIG_LIBCRC32C=m

board/qemu/sparc-ss10/readme.txt

@@ -1,8 +1,7 @@
 Run the emulation with:
 
-  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user
+  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user -display none
 
 The login prompt will appear in the terminal that started Qemu.
-The graphical window is the framebuffer.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/x86/linux-3.18.config

@@ -1,6 +1,6 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
@@ -29,12 +29,8 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_ATA_PIIX=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_NE2K_PCI=y
 CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -45,17 +41,17 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_X86_PLATFORM_DEVICES is not set
 # CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y

board/qemu/x86/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/x86_64/linux-3.18.config

@@ -1,6 +1,6 @@
-CONFIG_EXPERIMENTAL=y
 # CONFIG_LOCALVERSION_AUTO is not set
 # CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
 # CONFIG_COMPAT_BRK is not set
 # CONFIG_BLK_DEV_BSG is not set
 # CONFIG_IOSCHED_DEADLINE is not set
@@ -29,12 +29,8 @@ CONFIG_BLK_DEV_SD=y
 CONFIG_ATA=y
 CONFIG_ATA_PIIX=y
 CONFIG_NETDEVICES=y
-CONFIG_NET_ETHERNET=y
-CONFIG_NET_PCI=y
 CONFIG_NE2K_PCI=y
 CONFIG_8139CP=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
 # CONFIG_WLAN is not set
 # CONFIG_INPUT_MOUSEDEV_PSAUX is not set
 # CONFIG_INPUT_MOUSE is not set
@@ -45,17 +41,17 @@ CONFIG_SERIAL_8250=y
 CONFIG_SERIAL_8250_CONSOLE=y
 # CONFIG_HW_RANDOM is not set
 # CONFIG_HWMON is not set
-# CONFIG_MFD_SUPPORT is not set
 CONFIG_SOUND=y
 CONFIG_SND=y
 CONFIG_SND_HDA_INTEL=y
-# CONFIG_HID_SUPPORT is not set
 # CONFIG_USB_SUPPORT is not set
 # CONFIG_X86_PLATFORM_DEVICES is not set
 # CONFIG_DMIID is not set
-CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
 # CONFIG_DNOTIFY is not set
 # CONFIG_INOTIFY_USER is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
 # CONFIG_MISC_FILESYSTEMS is not set
 CONFIG_NFS_FS=y
 CONFIG_ROOT_NFS=y

board/qemu/x86_64/readme.txt

@@ -4,4 +4,4 @@ Run the emulation with:
 
 The login prompt will appear in the graphical window.
 
-Tested with QEMU 1.6.1
+Tested with QEMU 2.2.0

board/qemu/xtensa-lx60/linux-3.18.config

@@ -0,0 +1,36 @@
+# CONFIG_SWAP is not set
+# CONFIG_CROSS_MEMORY_ATTACH is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_XTENSA_VARIANT_DC232B=y
+# CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX is not set
+CONFIG_XTENSA_PLATFORM_XTFPGA=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE="console=ttyS0,38400"
+# CONFIG_COMPACTION is not set
+# CONFIG_BOUNCE is not set
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_NETDEVICES=y
+# CONFIG_WLAN is not set
+CONFIG_SERIAL_8250=y
+# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_LD_NO_RELAX=y
+# CONFIG_S32C1I_SELFTEST is not set

board/qemu/xtensa-lx60/linux/linux-0001-disable-redboot-and-uboot.patch

@@ -0,0 +1,16 @@
+disable boot-uboot and boot-redboot, requires a patched u-boot and mkimage
+
+Signed-off-by:Waldemar Brodkorb <wbx@openadk.org>
+
+diff -Nur linux-3.15.orig/arch/xtensa/boot/Makefile linux-3.15/arch/xtensa/boot/Makefile
+--- linux-3.15.orig/arch/xtensa/boot/Makefile	2014-06-08 20:19:54.000000000 +0200
++++ linux-3.15/arch/xtensa/boot/Makefile	2014-06-14 20:07:15.206091165 +0200
+@@ -23,7 +23,7 @@
+ 
+ bootdir-$(CONFIG_XTENSA_PLATFORM_ISS)	 += boot-elf
+ bootdir-$(CONFIG_XTENSA_PLATFORM_XT2000) += boot-redboot boot-elf boot-uboot
+-bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-redboot boot-elf boot-uboot
++bootdir-$(CONFIG_XTENSA_PLATFORM_XTFPGA) += boot-elf
+ 
+ zImage Image: $(bootdir-y)
+