Fixes:
WNPA-SEC-2014-08 / CVE-2014-5161 / CVE-2014-5162
The Catapult DCT2000 and IrDA dissectors could underrun a buffer.
WNPA-SEC-2014-09 / CVE-2014-5163
The GSM Management dissector could crash.
WNPA-SEC-2014-10 / CVE-2014-5164
The RLC dissector could crash.
WNPA-SEC-2014-11 / CVE-2014-5165
The ASN.1 BER dissector could crash.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use the official _BSD_SOURCE feature test macro instead of the meaningless
HAVE_STRSEP macro in order to detect the availability of strsep().
This allows toolchains supporting strsep() to use it instead of the custom
implementation from dhcpdump, which also avoids the following error with some
toolchains:
In file included from dhcpdump.c:30:0:
dhcpdump.c: At top level:
strsep.c:65:23: error: register name not specified for ‘delim’
register const char *delim;
^
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avoid compilation of the server via the upstream Makefile which
unconditionally uses -lssl
The -lssl flag is appended to MONGOOSE_CFLAGS whenever
BR2_PACKAGE_OPENSSL=y gets set.
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure step of the busybox package performs 'make oldconfig', which
causes the .config file to be updated. Thus, the .config file is more recent
than our stamp file .stamp_kconfig_fixup_done. On a subsequent build, our
dependency rules would kick in, and run the config fixup again, thus
kicking in the package's configure, build and install steps yet once
more, that, ad infinitum.
One solution is to modify kconfig-package to introduce an explicit touch of
the .kconfig_fixup_config_done stamp file, as post-configure hook.
Another solution, implemented by this patch, is to move the oldconfig call
from the package's .mk file to the kconfig-package infrastructure and make
sure it is done as part of the fixup commands. This way, the stamp file will
only be touched once, after the full fixup (including oldconfig) and no
endless rebuilds will occur.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current layout of comments wrt. to the related code-blocks is a bit
hard to handle visually.
Remove empty lines between the comments and their respective related
code-blocks.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gdb has had AArch64 support since 7.6 which is now the default minimum
version of GDB in the tree. Older versions are now legacy.
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump version to f9e6f9f3def8dc18dc0092cd695ccf53b8ba3efe and revert local commit
f22830e456 'rpi-userland: add patch fix missing
libvcilcs install rules' in order to replace the local patch from this commit by
the upstream commit 1ecc49c97b7be3d524cb4cfc97401f16b485a4ee 'vmcs_host: Fix
missing install of libvcilcs.so'.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
jack2 installs some headers and libraries that can be used by other
applications, so it makes sense to install it to the staging
directory.
Signed-off-by: Pieter De Gendt <pieter.degendt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git helper uses gzip to compress the intermediate tarball. But gzip
removes the source file, and create a new file named by appending .gz to
the original file name.
Thus, we end up with output.gz, while the download wrapper expects jsut
output, and thus believes the downlaod failed.
Fix that by storing the tar from git to a temporary file, then pipe this
file to gzip's stdin, and redirect gzip's stdout to the output file.
Reported-by: Graham Newton <gnewton@peavey-eu.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-2972 - prevent double expansion in math comparison
functions (can expand unsanitized data).
Also rename patches according to patch naming policy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The built dhcp binaries and the installed startup scripts used configuration
files under /etc/, but the configuration files were installed under /etc/dhcp/.
Fix everything to have configuration files under /etc/dhcp/.
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau@advansee.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the scp helper, as it no longer has to deal
with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by setting a primary site to 'scp://localhost:/tmp' and
running 'make vim-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the localfiles helper, as it no longer has
to deal with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
(Tested by setting BUSYBOX_SITE = file:///tmp and running 'make busybox-source')
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This drastically simplifies the bzr helper, as it no longer has to
deal with atomically saving the downloaded archive.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The download wrapper is responsible for ensuring the atomicity
of saving into $(BR2_DL_DIR).
It calls the appropriate download helper, telling it to save the
downloaded content to a temporary file in $(BUILD_DIR) (so it does
not clutter $(BR2_DL_DIR) with partial, failed downloads.
Then, only if the download helper was successful, does the wrapper
save the downloaded content to the final location, yet still in a
temporary file, and finally atomically renames it to the final output
file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-4617 (The do_uncompress function in g10/compress.c
allows context-dependent attackers to cause a denial of service
(infinite loop) via malformed compressed packets, as demonstrated by an
a3 01 5b ff byte sequence.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise it shows up indirectly when toolchain options aren't enough
and then vanishes when they are fulfilled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch converts the uclibc package to the new kconfig-package
infrastructure, thus removing code duplication and ensuring a consistent
behavior of kconfig packages.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds documentation for the new kconfig-package infrastructure to
the manual.
Note that due to the simplicity of the infrastructure, the documentation
is not split in a 'tutorial' and a 'reference', like for the other
infrastructures. Instead, the usage is described in one section.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[me: slight grammar fix 'copy -back- the configuration +back+ to...']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are several packages that have a configuration file managed by
kconfig: uclibc, busybox, linux and barebox. All these packages need some
make targets to handle the kconfig specificities: creating a configuration
(menuconfig, ...) and saving it back (update-config, ...)
These targets should be the same for each of these packages, but
unfortunately they are not. Especially with respect to saving back the
configuration to the original config file, there are many differences.
A previous set of patches fixed these targets for the uclibc package.
This patch extracts these targets into a common kconfig-package
infrastructure, with the goals of:
- aligning the behavior of all kconfig-based packages
- removing code duplication
In order to use this infrastructure, a package should at a minimum specify
FOO_KCONFIG_FILE and eval the kconfig-package macro. The supported
configuration editors can be set with FOO_KCONFIG_EDITORS and defaults to
menuconfig only.
Additionally, a package can specify FOO_KCONFIG_OPT for extra options to
pass to the invocation of the kconfig editors, and FOO_KCONFIG_FIXUP_CMDS
for a list of shell commands used to fixup the .config file after a
configuration has been created/edited.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[yann.morin.1998@free.fr: add missing 4th argument when calling to
inner-kconfig-package (namely, 'target']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The uclibc-menuconfig command is currently run based on the user-specified
config file, while the fixup of the config file is done afterwards.
However, it makes more sense to do an initial fixup _before_ running
menuconfig, so that the options presented to the user are consistent with
the final configuration.
This patch changes the dependency of the menuconfig target from .config to
.stamp_config_fixup_done to achieve this.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to select imx-vpu, packages must also select the
freescale-imx package, otherwise, kconfig prints some warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thrift requires GCC built-in atomic functions which are architecture specific
and may not be implemented.
[Thomas: remove incorrect empty newline at end of Config.in.]
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
GCC has several builtin functions that implement atomic operations. Those
functions are architecture specific and may not be implemented by the
specific toolchain. In case of GCC for ARC those functions rely on
LLOCK/SCOND instructions which are optional in ARC CPU's. If ARC CPU doesn't
support those instructions but software tries to use them, then application
will be aborted with Illegal instruction exception. To avoid confusion user
should first specify that their CPU supports atomic extension, which will
allow selection of packages that use builtin atomic functions.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since openssh-6.0, the ssh-keygen app has supported a -A option,
which creates any missing keys. This frees us of having to add
new ssh-keygen invocations as new key types are introduced. This
also frees us of having to know the default key names and locations.
So this patch replaces all the the init.d script invocations with
a single "ssh-keygen -A" call.
Note: the systemd service script *already* uses this option.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 93917b6980 introduced the
installation of the binary .qm translation files, unconditionally.
This patch introduces an option to disable this behavior, saving
almost 8MB of space.
[Thomas: rename option to BR2_PACKAGE_QT_TRANSLATION_FILES instead of
BR2_PACKAGE_QT_INSTALL_TRANSLATION_FILES, and move its definition
around the installation of examples/demos rather than in the middle of
the options for the different modules.]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove obsolete option --disable-vis
- add patch to fix compile error with uClibc
- add patch to fix compile error in freerdp
Compile-tested against all packages depending on ffmpeg using this defconfig:
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_GSTREAMER=y
BR2_PACKAGE_GST_FFMPEG=y
BR2_PACKAGE_MPD=y
BR2_PACKAGE_MPD_FFMPEG=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_FREERDP=y
BR2_PACKAGE_OPENCV=y
BR2_PACKAGE_OPENCV_WITH_FFMPEG=y
BR2_PACKAGE_MEDIASTREAMER=y
BR2_PACKAGE_MINIDLNA=y
VLC also compiled when the build of vlc-static is disabled in Makefiles,
otherwise this known error occurs:
http://autobuild.buildroot.net/results/022/022252176c051ff3365b2cb820f32aafc802803a/
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rpi-3.12.y branch has now been merged with the 3.12.25 upstream.
Bump kernel headers used for the toolchain at the same time.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump, amongst other things, introduces
OMX_ImageFilterDeInterlaceFast, which is needed by
the upcoming xbmc/kodi version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump introduces OMX_ImageFilterDeInterlaceFast,
which is needed by the upcoming xbmc/kodi version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds Bluez 5.x. Its API is not backwards compatible with
BlueZ 4 so it is packaged separately from BlueZ 4.
BlueZ utils will use systemd and/or udev if enabled. It contains a
hook to install the GATT support tool, which is always built but not
installed by default.
[Thomas:
- Add dependency on 3.4 kernel headers
- Add options for OBEX support and client support, to make the
libical and readline dependencies optional.
- Rewrap Config.in help text.
- Adapt indentation in .mk file.
- Bump to version 5.21.
- Use BR2_PACKAGE_HAS_UDEV instead of BR2_PACKAGE_UDEV.]
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the default configuration to use Linux 3.15.x.
Enable ext4, so that ext2/ext3/ext4 can be used.
Tested with Qemu 2.0.0.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In some situations, users may want to tweak the dynamic section of the
binaries (for example to add/set the RPATH to $ORIGIN/../lib).
Because it is not trivial to do it properly from the Buildroot
infrastructure, allow those users to use patchelf (e.g. from a
post-build script) to tweak binaries.
patchelf is able to:
- modify an existing DT_RUNPATH tags
- add a DT_RUNPATH tag if not already present
- do the above to the DT_RPATH tag, too
- set the path to the interpreter
- remove DT_NEEDED tags
- query a binary for the DT_RUNPATH/DT_RPATH tag, or for the
interpreter path
Does not really fix#7172, but this is an appropriate workaround.
[Thomas: change license to GPLv3+, as mentionned in the project's
README file.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As reported in bug #7172 [0], setting BR2_TARGET_LDFLAGS to a value
containing a $ sign can lead to unexpected results.
This is because it is very hard to know when the $ sign gets evaluated:
- in the Buildroot-level make
- in the shell called by the Buildroot-level make
- in the package's own build-system, either at configure time, in the
Makefile, in a shell in the Makefile...
So, it is very difficult to know how much escaping that would need.
A proposal is to use a shell variable to pass such values unmolested.
But it is not that simple either, since it still contains a $ sign, and
there is not much certainty as to when it would be evaluated.
Instead, just document this limitation, both in the help text for
BR2_TARGET_LDFLAGS, and in the known-issues section in the manual.
Does not really fix#7172, but at least the limitation is documented.
[0] https://bugs.buildroot.org/show_bug.cgi?id=7172
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Mike Zick <minimod@morethan.org>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: minor reformatting like removing trailing whitespaces,
wrapping to a shorter length Config.in help texts, etc.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
This patch removes it from $(PKG)_SITE variable for BR consistency.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the trailing slash is stripped from $($(PKG)_SITE) by pkg-generic.mk:
$(call DOWNLOAD,$($(PKG)_SITE:/=)/$($(PKG)_SOURCE))
so it is redundant.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tarballs are now provided for libevdev, so use that instead of the Git
repository, as it allows to avoid autoreconf for the package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In commit 79c31e3297 ("package/libevdev:
add dependency on host-python"), Yann added a dependency of libevdev
on host-python, because the Python script in evdev was using argparse
which is only available since Python 2.6. At the time, this was
causing failures on machines that were using Python versions older
than 2.6.
However, since Yann's patch, the libevdev version has been bumped. And
one of the upstream commit,
http://cgit.freedesktop.org/libevdev/commit/libevdev/?id=cea8f0b8cc86332b0643acd62f24f9fef2ecc153,
was precisely made to remove the argparse dependency to avoid the
need to have a >= 2.6 Python version.
Thanks to this, we can avoid the host-python dependency and rely on
the system-installed Python version instead.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add a new config option that allows to specify a list of files
to dump symbols from, and generate a database of symbols, in
stagins/usr/share/google-breakpad/.
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
[yann.morin.1998@free.fr: add dependency on the host variant; fix
script; add commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: remove leftover debugging, rewrap Config.in help text,
propagate dependencies correctly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Alter the libtool 1.5.x support patch to accomodate for wildly different
versions of ltmain.sh
Just make it alter incoming args from -static to -all-static which seems
to apply to all the different variants out there since argument parsing
is unlikely to change much.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After switching TARGET_LDFLAGS from --static to -static, one issue
appears: from the point of view of libtool, -static only means to link
statically against the 'uninstalled libtool libraries' (i.e the
libraries that libtool has built in the current package), but
otherwise links dynamically with the other libraries. To really get a
completely static build, you need to pass -all-static to
libtool. Unfortunately, -all-static is only a valid option for
libtool, not as a general LDFLAGS, so we cannot to TARGET_LDFLAGS =
-all-static without breaking virtually all packages.
As pointed out 10 years ago on the libtool mailing list, the current
naming of the options is very confusing and the source of issues, and
there was a proposal to change -static to have the behavior of
-all-static, and instead introduce a separate -lt-static to have the
current behavior of -static. But that never got merged, because it was
breaking the current behavior. See:
http://lists.gnu.org/archive/html/libtool/2004-11/msg00017.html
However, in Buildroot, when we pass -static, we really mean it, and we
want a completely static build. Therefore, this patch adapts our
ltmain.sh patches so that they alter the behavior of -static to make
it work like -all-static. The changes are small and quite easy to
understand, and have been tested to work fine with a small selection
of packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generic infra packages might not use LDFLAGS at all so add -static for
static builds to CFLAGS and CXXFLAGS too.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Disable shared build for host-gcc-final when building for static targets.
We really want static or shared, there's no such thing as "preferring static"
since we can't choose with any degree of granularity for which packages.
And it confuses linking scripts having both available at the same time. Fixes:
http://autobuild.buildroot.net/results/c54/c54bdf88eff6d60c7001cb0e2cb6792cc75178db/
[Thomas: slightly amend the commit to factorize the installation of
static libraries.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We were already removing the preloadable iconv library (that can be
used through LD_PRELOAD to override the C library iconv
implementation) from staging/target, but it was still built. And this
causes issues in static only scenarios, so this patch changes that to
not even build/install the preloadable library.
[Thomas: changed Gustavo's patch to take into the fact that we never
need the preloadable library.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If Binutils and/or GDB are fetched from the unified binutils-gdb
repository, then the tarball will contain both Binutils and GDB
sources, unlike the "normal" tarballs that contain only the titular
package. To keep packages separated in Buildroot we need to disable
undesired components when configuring.
Binutils and GDB migrated to a common Git repository in the October
2013 [1]. Previous Git repositories were incomplete copies of CVS
repository which copied only the relevant files (no binutils files in
GDB, and vice versa). In the new binutils-gdb repository there is no
such separation and a result all files exist in directory after
checkout. So if "configure" and "make" are used without explicit
targets, all projects will be built: binutils, ld, gas, bfd, opcodes,
gdb, etc. In case of Buildroot this would mean that selecting Binutils
only, still will build both Binutils and GDB. And if GDB is selected
as well, then both packages will be built two times, and Binutils from
GDB directory will overwrite initial build of Binutils (or vice versa
if Binutils will be built after the GDB). This is a serious problem,
because binutils and GDB use separate branches in this common
repository. In case of Buildroot this means that separate Git commits
(or tags) should be used when downloading source from Git.
This affects only Git repositories, because GNU release tarballs still
contain only relevant packages.
This change is backward compatible, because if "normal" tarball is
used (without extra directories), than --disable-* configure options
are just ignored by configure.
[1] https://sourceware.org/ml/gdb/2013-10/msg00071.html
[Thomas: use variables to factorize options, and add comments in the
relevant .mk files to explain what's going on.]
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Cc: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes build failure reported here:
http://autobuild.buildroot.net/results/262/26218e028f3d2c77c5192b45154627f08384b688/
uClibc toolchain for ARC doesn't support PIE
Attempt to build anything with "-pie" option lead to linker failure:
arc-buildroot-linux-uclibc-gcc -pie test.c
ld: ../4.8-r3/bin/../arc-buildroot-linux-uclibc/sysroot/usr/lib/crt1.o: warning: unresolvable relocation against symbol `__uClibc_main' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__deregister_frame_info@@GCC_3.0' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__deregister_frame_info@@GCC_3.0' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__register_frame_info@@GCC_3.0' from .text section
ld: ../4.8-r3/bin/../lib/gcc/arc-buildroot-linux-uclibc/4.8.0/crtbegin.o: warning: unresolvable relocation against symbol `__register_frame_info@@GCC_3.0' from .text section
In its turn this behavior confuses configure script of openssh so some options
get set improperly. In particular "strnvis" gets determined as existing which
causes failure during compilation:
log.c:67:25: error: 'VIS_SAFE' undeclared (first use in this function)
#define LOG_STDERR_VIS (VIS_SAFE|VIS_OCTAL)
With disabled PIE ("--without-pie") openssh gets built without issues.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When flex is built for the target without installing the
flex binary, a flex++ symlink installed by flex's Makefile
points to the missing flex executable. This mod adds
a post target install hook to remove the broken symlink.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The linux-* mirror targets of linux26-* have been added a very long time ago
(2010) and linux 2.6 is now considered 'old' anyway. It no longer makes
sense to support these linux26-* targets, so this patch removes them.
This is a simplification introduced in preparation of the kconfig-package
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no real reason to run uclibc-menuconfig in non-parallel mode,
even though one can neither expect performance benefits from a parallel
menuconfig.
Nevertheless, $(MAKE) is the default, so this patch removes the unnecessary
non-default $(MAKE1) usage for uclibc-menuconfig.
This is a simplification introduced in preparation of the kconfig-package
infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the sequence:
make uclibc-menuconfig
make uclibc-update-config
the freshly configured settings from the menuconfig are lost during the
update-config step. This is because update-config depends on the configure
step, which starts by copying the config file to the build directory.
Instead, stop depending on the configure step from update-config, and
introduce a new stamp file .stamp_config_fixup_done, which applies any
fixups on the .config file.
An alternative solution would be to add a call to UCLIBC_FIXUP_DOT_CONFIG to
the relevant targets instead of depending on a new stamp file. The advantage
of the stamp file, though, is that we avoid redoing the fixup unnecessarily.
Moreover, in the light of the plan to extract the kconfig-specific bits into
a separate kconfig-package infrastructure, the stamp file rules are more
easily moved into such an infrastructure, while the alternative solution
requires the package .mk file to explicitly call the FIXUP rules which may
more easily be forgotten.
No longer depending on the configure step has the added bonus that
'uclibc-update-config' no longer needs the toolchain to be available, which
makes:
make clean uclibc-menuconfig uclibc-update-config
much faster and user-friendly.
Additionally, make sure that 'make clean uclibc-update-config' works
properly, by depending on .stamp_config_fixup_done so that the config file
is present and fixed.
Fixes bug #7154https://bugs.busybox.net/show_bug.cgi?id=7154
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When executing the sequence 'make clean uclibc-menuconfig', the configured
config file is not taken into account and one starts from the default
settings.
This patch adds an explicit target for the config file and lets the
configure and menuconfig steps depend on it, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In a subsequent patch, the behavior of UCLIBC_SETUP_DOT_CONFIG will change
so that it only applies fixups to the (already copied) configuration file.
This patch renames this function to UCLIBC_FIXUP_DOT_CONFIG to better match
the future behavior.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If libuClibc is not installed to staging on attempt to build tests following
errors happen:
============
TEST_LINK termios/ termios
.../host/usr/arc-buildroot-linux-uclibc/sysroot/usr/lib/crt1.o: In function `__start':
.../build/uclibc/libc/sysdeps/linux/arc/crt1.S:53: undefined reference to `__uClibc_main'
termios.o: In function `main':
.../build/uclibc/test/termios/termios.c:13: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:14: undefined reference to `printf'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `stdout'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `fileno'
.../build/uclibc/test/termios/termios.c:16: undefined reference to `ioctl'
.../build/uclibc/test/termios/termios.c:19: undefined reference to `perror'
.../build/uclibc/test/termios/termios.c:21: undefined reference to `printf'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memcpy'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `malloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `abort'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `calloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `dl_iterate_phdr'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `realloc'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `memset'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `strlen'
.../host/usr/lib/gcc/arc-buildroot-linux-uclibc/4.8.0/../../../../arc-buildroot-linux-uclibc/lib/libgcc_s.so.1: undefined reference to `free'
collect2: error: ld returned 1 exit status
make[3]: *** [termios] Error 1
============
And the simplest solution is to build tests right before installation in
UCLIBC_INSTALL_TARGET_CMDS which follows UCLIBC_INSTALL_STAGING_CMDS so
all required libs are in place.
Interesting note - if one enables uClibc tests after initial full buildroot
build mentioned errors don't happen. This is because uClibc libc libs are
already installed to staging. That's why I didn't noticed this problem before.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- enable sna module by default
- optionally enable uxa module if DRI2 support is enabled
- add support for DRI3
- dependencies for DRI1/2/3 modules are provided by xserver_xorg-server,
therefore remove mesa3d dependency
- clean-up ums/kms options, configure picks sane defaults
- replace dependencies xproto_randrproto & xproto_renderproto with xlib_libXrandr
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Foreign Function Interface for Python calling C code.
[Thomas: add dependency on host-pkgconf and libffi, enable on Python 3
since the module builds fine and loads fine with Python 3 as well.]
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The -s is missing in the documentation when teaching how to use 'git
format-patch' to automatically add the sob line.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While updating the default config for Sparc, I noticed that networking
is broken. The reason is a uClibc backport patch from uClibc
master. This commit adds a fix on top of it, which was submitted to
upstream uClibc.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update defconfig to 3.15, tested with Qemu 2.0.0.
Removed hint about framebuffer, as -display none is used.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current popt build system tests the existence of <glob.h>, and
then assumes that if __GLIBC__ is defined, then glob_pattern_p() must
be available. Unfortunately, that's not true with uClibc: <glob.h> may
be installed, but not necessarily the GNU glob extensions... and
uClibc defines __GLIBC__. This is causing build issues with certain
uClibc toolchains that do not have GNU glob extensions enabled.
To fix this, we introduce a patch called popt-03-glob-detection.patch
which adds a new AC_CHECK_FUNCS() test for glob_pattern_p() and uses
the result to know if this function is available, instead of testing
__GLIBC__.
In order for this patch to work, the popt package must be
autoreconfigured, so another patch, popt-02-fix-autoreconf.patch, is
needed to make the package autoreconfigure properly. And also
POPT_AUTORECONF = YES is added to popt.mk.
Finally, this change avoids the need for the Blackfin toolchain
specific testing, which we forgot to update when introducing the
2014R1 version of the Blackfin toolchain. With this new solution,
there will be no need to update the popt.mk file when new Blackfin
toolchains are added.
Fixes:
http://autobuild.buildroot.org/results/e09/e09e24fec240382a3197fef3e98eb9a22f76420a/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Yuvaraj Patil <yuvaraj.patil@wipro.com>
Cc: Sonic Zhang <sonic.zhang@analog.com>
This patch renames the popt patch popt-1.14_no-wchar.patch to
popt-01-no-wchar.patch in order to follow the naming convention used
in all packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The MIT license was in the original submission, but I had removed it
since I couldn't find where it was used. It is indeed used in
flup/server/paste_factory.py as noted by the original
submitter. Therefore, this commit adds the MIT license as one of the
licenses of python-flup.
Reported-by: Oli Vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
flickcurl does not specifically need openssl: it needs libcurl to have
crypto support to access https:// URLs. So, instead of depending on
openssl in FLICKCURL_DEPENDENCIES, this commit simply leaves it to the
Config.in file to select either OpenSSL, gnutls or libnss to make sure
libcurl will use one of these libraries.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ca-certificates is a runtime dependency only, so selecting it in the
Config.in file is sufficient, adding it to FLICKCURL_DEPENDENCIES is
not useful.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We need two patches from upstream git as flickr now requires https access.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[yann.morin.1998@free.fr: fix the kconfig recursive loop when selecting
a SSL implementation]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openssl is more widely used than gnutls. Other packages prefer openssl
over gnutls and would like to do the select in the opposite direction.
So switch lftp to use openssl by default, and only revert to using
gnutls if explicitly selected by the user.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use one single BR2_PACKAGE_ICU_CUSTOM_DATA_PATH string option
instead of a boolean option + a string option, which always causes
a lot of issues with random configurations that enable the boolean
option, but do not provide a valid value for the string option.
- enclose the definition of ICU_COPY_CUSTOM_DATA into the condition.]
Signed-off-by: Johan Derycke <johan.derycke@barco.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Certain packages need the headers/libraries from Postgresql to build
properly.
[Thomas: slightly reword the commit message.]
Signed-off-by: Nathaniel Roach <nroach44@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gconv libraries are used to translate between different character sets
('charsets', even 'csets' sometimes). Some packages need them to present
text to the user (eg. XBMC Gotham).
In (e)glibc they are implemented by the internal implemenation of iconv,
called gconv, and are provided as dlopen-able libraries.
Note that some gconv modules need extra libraries (shared by more than
one gconv module), so we must, when adding a subset of modules, scan the
installed modules in search of the missing libraries.
[Thomas: add general explanation in expunge-gconv-modules and fix
coding style.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Eric Limpens <limpens@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enabling PCRE16 is not enough for Qt5. PCREUTF is also necessary, else
Qt5 may complain with this kind of (non fatal) message:
QRegularExpressionPrivate::doMatch(): called on an invalid QRegularExpression object
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: adjust license information to use SPDX code for Python
license, add GPLv2+ which is used for the tests, and fix the license
file variable.]
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This module is useful to implement a fastCGI webserver
Tested with ARM and Python 2.7.6
[Thomas: fix license informations.]
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_TOOLCHAIN_HEADERS_AT_LEAST_X_Y symbols can be used to denote the
lowest required kernel headers version, but also the highest supported
version. Document that.
Use the `...` construct instead of +...+ used eveywhere else, otherwise
asciidoc would render +<=+ to the ⇐ arrow, while `...` does no rendering
at all.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the decimal module support optional: since Python
3.3 it relies on an external library. The source code of this library
is available built-in as part of the Python sources, but in Buildroot
we generally prefer to use the external library when possible.
To achieve this, this commit adds a patch to Python that is similar to
the one we use for expat support, but this time for the
libmpdec/mpdecimal library.
As a consequence, since mpdecimal now builds properly even when
<fenv.h> is not available (on i386), this commit fixes:
http://autobuild.buildroot.org/results/b64/b64d5c941a7cac00619da3a0696939f86a8eafc2/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
when we embed luajit on target,
we use luarocks with host-luajit instead of host-lua,
in order to use the same interpreter on the both side.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
the goal is to use host-luajit with pkg-luarocks
when luajit is on the selected luainterpreter for the target
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package couldn't build using a toolchain with kernel headers >=
3.10 because of the use of VIDIOC_DBG_G_CHIP_IDENT. As stated in
videodev2.h, this ioctl should never be used.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
http://autobuild.buildroot.net/results/48a/48ad6d3659cf1f04581b7e3d115bebf454ff17fd/
To fix the error add "-lz" to LIBS variable and re-order the libraries in
configure.ac. Please note line 797 in configure.ac:
dnl XXX FIXME: use pkg-config if available!
Quote of the compile error:
configure: Enabling OpenSSL support in /home/br/br/output/host/usr/i486-buildroot-linux-uclibc/sysroot/usr.
checking for additional library dependencies of SSL... error
configure: error: cannot link with SSL - check config.log
In config.log multiple linking errors to libz can be found:
configure:10099: /home/br/br/output/host/usr/bin/i486-ctng-linux-uclibc-gcc -o
conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64
/home/br/br/output/host/usr/i486-buildroot-linux-uclibc/sysroot/usr/lib/libcrypto.a(c_zlib.o):
In function `zlib_stateful_c_zlib.c:(.text+0x56): undefined reference to `inflate'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Same as similar patches for imx-vpu, the returned value from
IOGetVirtMem was not properly checked.
[Thomas: add upstream reference to the patch, suggested by Yann
E. Morin.]
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by mnemoc on IRC the default busybox config doesn't enable
fdisk and util-linux is hidden by !BR2_PACKAGE_BUSYBOX_SHOW_OTHERS.
On modern systems fdisk usage is becoming more common so enable it, it
just adds up ~25 KiB to total binary size.
People who are on the edge for space savings will normally customize
their busybox config.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 215, systemd installs a service to execute /sbin/ldconfig
when the sysinit target is reached.
Unfortunately, /sbin/ldconfig is not installed on a target built using a
glibc-based toolchain.
As this service is not mandatory, it is now disabled, thus avoiding a
warning in the journal.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
So far, the legal-info infrastructure was not exporting the legal
info for the C libraries. This is because the legal-info only acts
on packages defined in $(TARGETS).
But the C libraries are never added to $(TARGETS), since there is no
corresponding BR2_PACKAGE_<C-LIBRARY>.
This patch adds such symbols for the 4 C libraries we support in our
internal backend: uClibc, glibc, eglibc and musl.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
> Warning: Users of Python 3.4 should not use pyzmq < 14.3,
> due to changes in garbage collection.
Plus, there's some interesting stuff in 14.x.
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In English, unlike in French, almost all usages of the word 'information'
are uncountable, meaning that 'informations' is invalid.
This patch fixes this typo throughout the tree, except in CHANGES and
docs/news.html (historic text).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves the autotools-package infrastructure to support a
<pkg>_AUTORECONF_ENV variable, which allows a package maintainer to
pass additional variables in the environment of the autoreconf
execution. This is useful in the situation where configure.ac contains
shell commands using environment variables that are only executed when
autoreconf is run.
Signed-off-by: Rick Taylor <rick.taylor@cassidian.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We define the two groups 'nobody' and 'nogroup' in our skeleton, but
they have the same gid, which is not valid.
This breaks the mkuser script, as noticed by Thomas.
Anyway, the user 'nobody' belongs to the group 'nogroup' in any sane
distribution.
So, just remove the spurious 'nobody' group.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
I would like to propose adding the site to the legal-info manifest
files. This gives a little more information on where the sources came
from without adding much overhead. Please note that is is only for
packages where the source is not local or set with OVERRIDE_SRCDIR.
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the BR2_PACKAGE_LIBPTHSEM_COMPAT option to the
libpthsem package, in order to enable the compatibility with the pth
library, which is useful to support gnupg2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Patch description:
use_texturepacker_native=yes
is needed because we obviously need a native-compiled binary, but the xbmc
build system does enable this variable only for darwin, android and
raspberry-pi targets.
USE_TEXTUREPACKER_NATIVE_ROOT="$(HOST_DIR)/usr"
is also needed because
USE_TEXTUREPACKER_NATIVE_ROOT="$TEXTUREPACKER_NATIVE_ROOT"
is only executed for raspberry-pi by xbmc/configure and only
USE_TEXTUREPACKER_NATIVE_ROOT is used by tools/TexturePacker/Makefile.in.
To sum up, building for raspberry-pi and other archs works out-of-the-box,
compiling for an Intel target, for example, fails:
In file included from SDL_anigif.cpp:23:0:
SDL_anigif.h:24:21: fatal error: SDL/SDL.h: No such file or directory
compilation terminated.
XBMCTex.cpp:34:21: fatal error: SDL/SDL.h: No such file or directory
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add dependencies needed by xbmc on BR2_LARGEFILE, BR2_INET_IPV6 &
BR2_USE_WCHAR after the removal of BR2_TOOLCHAIN_USES_GLIBC
- Add xbmc-0002-mathutil.patch to fix ARM compilation
[Thomas: factorize architecture dependency in a new
BR2_PACKAGE_XBMC_ARCH_SUPPORTS option.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: explicitly specify the path to the PID file, and also on the
first boot, generate the mandatory MySQL system tables so that the
MySQL daemon actually starts properly.]
Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge init script
[Thomas: do not define a password nor a shell, add a description for
the user.]
Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge user def
Fixes compile error:
checking for FS... configure: error: in `/home/br/br/output/build/xlib_libFS-1.0.6':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables FS_CFLAGS
and FS_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
using this minimal defconfig
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XAPP_XFS=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version bump includes bumping version
xlib_libXfont to 1.4.99.901 & xproto_fontsproto to 2.1.3.
xserver_xorg-server 1.16.0 depends on them, but they are incompatible
with older versions of xserver_xorg-server, for details and libXfont-related
CVE´s see http://lists.x.org/archives/xorg-announce/2014-July/002453.html
Also remove patches applied upstream.
Since a different patch than xserver_xorg-server-100-mips.patch
was committed upstream:
http://cgit.freedesktop.org/xorg/xserver/commit/?id=19e5a13970ad9d440c0789395e94931429ef4fbb
I also compile tested using this defconfig:
BR2_mips64=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CEC support with libcec needs udev, but it is the responsibility
of libcec to have proper build-dependencies, not XBMC.
So, just remove the spurious dependency on udev in XBMC.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Those defconfigs rely on gcc 4.3.x, which was said to be the only gcc
version that was producing a working kernel. Since we have removed gcc
4.3.x, those defconfigs no longer build. Also, the kernel being used
in these defconfigs was 2.6.32, but there is a "new" 2.6.39 kernel
available from the lpclinux.com git repository, which maybe works fine
with more recent compilers.
However, those defconfigs were contributed by Alexandre Belloni, who
no longer has access to the hardware, so we have no way to verify that
a compiler update + kernel update actually works.
Therefore, we simply remove those defconfigs.
Cc: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The mirror we currently use is not a mirror, it's the main archive.
It has a few shortcomings:
- it might not contain all the versions of the modules we use,
- it can be unavailable at times (like now, for example)
Switch to using a realmirror, that:
- does a round-robin on the actual mirror, so availability is better
- contains all versions of all modules (yes, mojolicious is there!)
As a consequence, switch mojolicious to use our standard mirror,
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: François Perrad <francois.perrad@gadz.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Align the way we call gettextize to the way we call autoreconf:
- provide the $(GETTEXTIZE) variable
- pass $(HOST_CONFIGURE_OPTS) in the environment
- pass the fully-qualified path to autom4te
- use of -f even if the package provides its own options
Some eye-candy in the output of gettextize.
Thanks to Gustavo for pointing out the discrepancy between the way we
call gettextize and the way we call autoreconf, and to Thomas for the
live debug session. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For varying reasons it doesn't play well with uClibc or musl based
toolchains so they're excluded for now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps systemd to version 214.
Changes:
- add new users: systemd-bus-proxy, systemd-network and systemd-resolve.
- remove gtk-doc patch, as it is no longer needed.
- remove attr dependency (extended attributes functions are provided by
glibc).
- enable nss-myhostname, so local hostname changes are properly handled.
- add hook to install symlink to resolv.conf when using
systemd-networkd.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The xtensa ioctls.h header references struct serial_multiport_struct that is
not defined in this header or included headers. ioctls.h also references
tty_struct that is not exported to userspace at all. Add a patch fixing these
issues.
This is only a workaround as the real problem should be fixed in the kernel
(by removing all struct references like all other archs). But since we support
older kernel versions we'll have to carry this patch for some time.
Fixes:
http://autobuild.buildroot.net/results/12b/12b5612828d7f1fc7d1f69fc01341d5a6e628db5/
Cc: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cp helperscript expects a filename as target, but just the folder
name was given.
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit improves the scancpan script to automatically populate the
LICENSE_FILES variable using informations available in the Perl
package MANIFEST file.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-4617 (The do_uncompress function in g10/compress.c
allows context-dependent attackers to cause a denial of service
(infinite loop) via malformed compressed packets, as demonstrated by an
a3 01 5b ff byte sequence.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds a package definition for the powerpc-utils project,
containing a set of powerpc-specific hardware management utilities.
We're using a git tag from upstream, which contains a few build-system
fixes.
[Thomas:
- Add dependency on PowerPC architecture in Config.in.
- Add homepage in Config.in help text.]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kexec-lite is a tiny impementation of kexec for devicetree-based
platforms.
[Thomas:
- Add !BR2_PREFER_STATIC_LIB dependency, inherited from the dtc
package
- Fix license to be GPLv2+, and not just GPL.
- Use $(TARGET_CONFIGURE_OPTS) instead of manually passing CC, LD,
CFLAGS.
- Use a full path as the target of $(INSTALL)]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dcron doesn't create a pid file, so we run it in foreground but make
start-stop-daemon create the pidfile and move the daemon to background.
Give it a number greater than exim's init script, so job output email
can be sent.
[Thomas: as suggested by Yann E. Morin, use DCRON_INSTALL_INIT_SYSV.]
Signed-off-by: Alvaro G. M <alvaro.gamez@hazent.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
MUSL doesn't build happily with gcc 4.9.0/1 so work around the bug when
appropiate as suggested by upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C when
BR2_PREFER_STATIC_LIB is enabled. A Perl module written in C or with a
dependency on a module written in C is not available when doing a
static build.
Therefore, this commit adapts the scancpan script to automatically
generate a dependency on !BR2_PREFER_STATIC_LIB when the Perl module
would not work in a static-only configuration.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
DRI3 support is optional in mesa3d, but mesa3d expects it by default,
so add configure options to disable it when necessary and add the
needed dependencies for DRI3 support. Fixes:
===============================
checking for DRI3PROTO... no
configure: error: Package requirements (dri3proto >= 1.0) were not met:
checking for PRESENTPROTO... no
configure: error: Package requirements (presentproto >= 1.0) were not met:
configure: error: Package requirements (x11 xext xdamage xfixes x11-xcb xcb-glx >= 1.8.1
xcb-dri2 >= 1.8 xcb-dri3 xcb-present xcb-sync xshmfence >= 1.1) were not met:
Package xshmfence was not found in the pkg-config search path.
===============================
This defconfig was broken and fixed by this patch:
BR2_TOOLCHAIN_EXTERNAL=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XPROTO_DRI3PROTO=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed for DRI3 support in mesa3d:
configure: error: Package requirements (x11 xext xdamage xfixes x11-xcb xcb-glx >= 1.8.1
xcb-dri2 >= 1.8 xcb-dri3 xcb-present xcb-sync xshmfence >= 1.1) were not met:
Package xshmfence was not found in the pkg-config search path.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since there is currently no easy way to know if the current Buildroot
configuration has a toolchain supporting OpenMP (especially for external
toolchains), then just disable it.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps OpenCV version and address the minimal set of change to
get the new version building correctly:
- update the download location;
- force Qt version to Qt 4 when support is enabled;
- naively fix the v4l support.
However, it does not address a couple improvements, among these:
- jasper support;
- python/numpy support;
- Qt4 and Qt5 support (since the 2.4.6 release), so only Qt4 support is
supported in this patch;
- optional libv4l dependency (since 2.4.7 release);
- etc.
These will be addressed in followup patches.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-numpy can be linked with libblas and liblapack, so
automatically do it when clapack is enabled.
[Thomas:
- Fix issues in the original submission and reformat according to
Yann E. Morin suggestions.
- Properly format the "libraries" entry in site.cfg as outlined in
the example site.cfg file: the list of libraries should be
space-separated.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch add NumPy package for python.
Since Fortran support has been deprecated in Buildroot since the 2013.11
release, and because most of the external toolchains do not provide a
Fortran compiler, it is necessary to explicity disable Fortran compiler
to avoid catching the one from the host system if any.
We also need to fill a site.cfg file to tell NumPy build-system where
it should looking for BLAS and LAPACK libraries.
Some packages may include headers provided by python-numpy package, so
python-numpy is installed to the staging directory.
[Thomas:
- add dependency in Config.in to take into account fenv.h
requirement, suggested by Yann E. Morin.
- modified to use the staging installation logic in the python
package infrastructure.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-numpy needs to be installed to the staging directory, since it
also installs some header files. Therefore, this commit extends the
Python package infrastructure to support staging installation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add package to package/Config.in
- add missing dependencies on thread and largefile, inherited from
libupnp. Noticed by Yann E. Morin.
- add installation of default configuration file. Noticed by Yann
E. Morin.
- fix the license, it's not GPLv2, but GPLv2+.
- remove the colon in the user description, noticed by Yann E. Morin.
- added a patch to fix build with uClibc.
- fix the init script installation to use a full path as the target.]
Signed-off-by: Joerg Krause <jkrause@posteo.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Whithout this path, default platform is automaticaly set (generally
set to "eglfs" as defined in
qt5base/mkspecs/devices/common/linux_device_pre.conf:1). This choice
is not always what the user would like. Thus, user have to manually
appends "-platform <BACKEND>" to command line when running any qt5
application.
This patch allows user to choose default platform explicitly.
[Thomas: slightly improve Config.in help text, from the suggestions
given by Yann E. Morin.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems common knowledge to use git rebase in interactive mode
to fixup issues while respinning patch series, but I found it hard
to find any hint about it. Add a note for git beginners like me.
[Thomas: take into account Arnout's comment.]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The path for kmod used in kmod-static-nodes.service is the one found by
the ./configure script, which ends up being the path to the host kmod
program.
This patch forces the path to the target kmod program.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Result tested with Qemu 2.0.0 without issues.
Old SCI problems are fixed in Qemu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Boundary Devices Nitrogen6X comes in a number of variants
with different processors, and the kernel and userspace is
compatible with the SABRE Lite (BD-SL-i.MX6), Nitrogen6_Lite,
and Nitrogen6_Max boards.
This patch adds support for these boards through the
corresponding .dtb files.
Signed-off-by: Eric Nelson <eric.nelson@boundarydevices.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set the default platform for gst-fsl-plugins, based on the one choosen
as the generic Freescale i.MX platform.
We can't use only this generic platform choice, as gst-fsl-plugins has
support for more platforms.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gary Bisson <bisson.gary@gmail.com>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As the VPU code is now apart from imx-lib, this package also depends
on imx-vpu.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: slightly tweak commit log <80 chars]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The libfslvpuwrapp versionning no longer follows the same version scheme
as the other Freescale components.
As VPU code is no longer in imx-lib, this package now depends on imx-vpu
package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As of 3.10.17-1.0.0 release, VPU code is now in its own package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: slightly rework the kconfig comment; fold the
imx-vpu patches into this changeset; add one missing license file]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
[yann.morin.1998@free.fr: split from the previous patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
That way all the i.MX packages can inherit from that information,
for example, the soon-to-be-introduced imx-vpu package.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: the part about gpu-viv-bin-mx6q moved to
its own patch; rework the commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The include files from the FSL kernel are properly separated out in
uapi, so we must include that instead of the kernel-side headers.
imx-lib no longer includes VPU code and therefore is now free from
Freescale License. It is now LGPLv2.1+.
Also, it is now provided as a normal .tar.gz, so _SOURCE is no longer
needed. So, remove our custom _EXTRACT_CMDS.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: _SOURCE is no longer needed, rework commit
log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bumping the version requires some heavy changes in the different
i.MX related packages. Instead of having a single huge patch, those
changes are split in smaller patches, one per affected package.
This has the inconvenient side-effect of breaking the build right
now with the bump; but it is better since the patches are easier to
understand.
Signed-off-by: Gary Bisson <bisson.gary@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: expand commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The rules to purge unwanted locales from the target also removed
the locale-archive file from /usr/lib/locale which contains the
locale definitions explicitly generated for the target.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change license to be GPLv2. The header of makedevs.c is a bit
unclear, as it mentions both the GPL and LGPL. But since the code
seems to originally be coming from Busybox, assuming GPLv2 is the
safest option.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For example the upcoming qemu-xtensa patch is using this feature,
where the target is called "zImage", but the resulting kernel name
is "Image.elf".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
exim has lots of options configurable before the build process. It's not
useful to have all of them exposed in Buildroot, yet users may need to tweak
them.
Allow the user to pass an entire configuration file to make exim totally
reconfigurable without bloating the Buildroot menus.
[Thomas: remove "for exim" from Config.in options prompts.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sensors-detect program is in fact a Perl script, so it won't run
on the target unless Perl is enabled in the configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
To know whether the libiconv library is available, lm-sensors is using
the host ldconfig, which is obviously wrong in cross-compilation.
Moreover, the lm-sensors program making use of the iconv_*() API
already does it when __UCLIBC__ is *not* defined. In this case, the
iconv_*() functions are already part of the C library, so there is no
need to link against a separate library. Therefore, this patch simply
removes the libiconv handling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This patch adds support for time.tzset() in Python 2.7 and Python 3.
The Python configure script sets ac_cv_working_tzset to 'no' when
cross compiling, although it should be available and work with all
toolchains supported by Buildroot (?).
The patch below pre-sets the variable so that time.tzset() works.
[Thomas: adjust commit log.]
Signed-off-by: Henry Margies <henry.margies@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PyZMQ package is currently limited to Python 2; however, its
build system does not require the Python 2 interpreter and will work
as is with Python 3 (tested).
Signed-off-by: Philippe Proulx <eeppeliteloop@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The help text of grub2 explains the detailed steps to create a disk
image with grub2 installed on it. However, the steps for the
BIOS-based systems have a few minor issues fixed by this patch:
- When calling partx to get the partitions detected, we should do it
on the /dev/loop0 block device, and not on the underlying disk.img
image file.
- The grub-bios-setup utility must be called as root to work properly
on /dev/loop0.
- The steps to cleanup the partx and loop device were missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the following commits:
26974bf6a7 use default binutils for sh architecture
6f1cf344d9 binutils: Use the default version by default on MIPS
the 2.21.1 binutils version is no longer required, and since it's an
old version, we get rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Following d4839ffcab ("binutils: remove
2.20.1, 2.21 and 2.23.1"), Config.in.host contains unneeded
definitions of BR2_BINUTILS_VERSION for no longer existing
versions. This patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The echo statements in the kconfig helpers are currently using double
quotes. For KCONFIG_SET_OPT this is problematic when the value argument
itself contains a double quote (a string value). In this case, the statement
echo "$(1)=$(2)" >> $(3)
would become:
echo "FOO="string value"" >> /some/path/.config
resulting in the string
FOO=string value
in the config file, rather than the properly quoted
FOO="string value"
The linux package worked around this by escaping the quote characters, but
a prettier solution is to use single quoting in the helpers (or
alternatively use no quoting at all).
A side effect of this change is that a $variable in the key or value would
no longer be interpreted by the shell, removing any unexpected behavior.
This change is only really necessary for KCONFIG_SET_OPT, but for symmetry
reasons the other helpers are updated too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When TARGET_LDFLAGS contains more than one option, the generated
Makefile contains this definition of LDDLFLAGS:
LDDLFLAGS = '--option-1 --option-2'
Which when passed to gcc is interpreted as a single option, and gcc
(rightfully) barfs on it, like with:
arm-linux-gnueabihf-gcc: error: unrecognized command line
option ‘-shared -g’
This is because perl-net-ssleay's buildsystem is really completely
brain-damaged. Other perl extensions do not behave like that, and
instead are doing the only sane thing to do: not add single quotes
around the definition, and just use what they were provided for
LDDLFLAGS.
So, just do the same for perl-net-ssleay. Since tweaking (yet once
more) their buildsystem is too complex, we just use a post-configure
hook to fix up the mess, by removing single quotes around the definition
of LDDLFLAGS.
Note: if only one option is specified, no single quotes are added,
but our hook is a no-op in this case.
See also:
http://lists.busybox.net/pipermail/buildroot/2014-July/101782.html
and the previous message for even more entertainment. ;-)
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[me: find the real cause of the issue, tweak the sed expression to not
force -shared and instead just trim the single quotes, enhance commit
log]
[Thomas: fix minor typos in the commit log, add comment above hook
definition]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When nasm was added in da8d09b716, it got both the host and the target
variants even though it doesn't have a Config.in and the target variant isn't
used anywhere. Therefore, this patch removes the unused target variant.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C.
perl-xml-libxml is written in C, so it is not available when doing a
static build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Perl extensions are loaded at runtime with dlopen(), so it does not
make sense to even build extensions that are written in C.
perl-net-ssleay is (partly) written in C, so it is not available when
doing a static build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <francois.perrad@gadz.org>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The buildsystem for perl-net-ssleay is totally brain-damaged: it tries
to execute the openssl program. It uses that to check the openssl
version, detect the prefix to openssl, and set the include and library
search paths.
Of course, it does not handle the destdir idiom, so it ends up finding
the host system's openssl (not even ours!), so it sets search paths to
/usr/inlcude and /usr/lib and /lib.
Well, guess what? It does not work.
Fix that by:
- passing the prefix to openssl in the environment, so it does not go
hunting for the host-system openssl;
- not checking the version string, since we can't run, and Buildroot
has the correct version anyway;
- not setting any -I or -L paths since our compiler/linker already
know where to look for for includes and libs.
Fixes:
http://autobuild.buildroot.net/results/135/135867ef85535863e3647cc5fb82accb6f77612c/
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[me: enhance commit log, add patch to avoid running openssl and setting
wrong include and library search paths]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some perl packages may use environment variables as a hint to know how
to be configured.
That's for example the case for perl-net-ssleay that uses
OPENSSL_PREFIX, if it is set in the environment, as the prefix to
openssl.
Add a new variable that packages can set if they need extra environment
variables. Update the manual accordingly.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: enhance the commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes the following build error reproducible with any linux kernel
module built with a recent buildroot toolchain:
LD [M] fs/jbd2/jbd2.ko
/bin/sh: line 1: 12069 Segmentation fault
buildroot/host/usr/bin/xtensa-buildroot-linux-uclibc-ld -r --no-relax
-T linux/scripts/module-common.lds --build-id
-o fs/jbd2/jbd2.ko fs/jbd2/jbd2.o fs/jbd2/jbd2.mod.o
Backported from: e7d17e71cdc10a2e81e454ce3b9637f1b2a587f2
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fix for the LZO issue in Busybox was merged between the moment the
patch removing the Busybox version selection was posted and
merged. This patch adjusts the Busybox patches to take into account
this issue: it removes the LZO patches for the no-longer existing
Busybox versions, and moves the LZO fix for the 1.22.1 Busybox version
as appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Fixes CVE-2014-4911 and a few other issues that don't have a CVE assigned
(backports from 1.3.x branch).
The no programs & shared/static patches are now upstream albeit in a
slightly different form.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The AVR32 architecture from Atmel is obsolete since a long time, not
supported upstream in most of the toolchain components (requires a
special version of gcc, an old version of uClibc, etc.). Until
February, Simon Dawson was making an excellent job at maintaining
AVR32 in Buildroot, and fixing all the issues caused by this
architecture. However, Simon focus has changed, and despite his call
for a new maintainer for AVR32 in Buildroot, nobody stepped up.
The issue of maintaining AVR32 is becoming worse and worse, so this
patch proposes to deprecate it for 2014.08, but keeping the support
around, to remove it for sure in 2014.11.
Cc: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the version selection for the busybox
package. Busybox is very well maintained, and bugs are typically fixed
in a timely fashion. Moreover, regressions are fairly unlikely in this
very stable and well-tested tool.
Therefore, there isn't a very compelling reason to have a version
selection for Busybox since we don't accept such a version selection
for the vast majority of other packages, unless there is a strong
reason to do so.
Consequently, this commit:
* Removes the 1.19.4, 1.20.2 and 1.21.1 Busybox versions, patches and
default configuration file.
* Moves the 1.22.1 patches from package/busybox/1.22.1 to just
package/busybox/ like all other packages.
* Renames the default 1.22.1 configuration file to just
busybox.config.
* Adapts the busybox.mk makefile to encode the current version to
use.
* Adds appropriate options to Config.in.legacy. However, even though
the BR2_BUSYBOX_VERSION_1_22_X is removed, we don't add a
Config.in.legacy option for it, since it would cause a legacy
warning for virtually *all* users as most people are currently
using 1.22.x.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already default to 7.6 for all architectures (except AVR32, ARC and
Microblaze that have their specific versions), and we have added 7.7
recently.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Those gcc series are old and are not used as the default versions for
any of the architectures we support, so this commit gets rid of them.
The gcc 4.3.x series technically remains used by the LPC32xx
defconfigs we have:
configs/ea3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/fdi3250_defconfig:BR2_GCC_VERSION_4_3_X=y
configs/phy3250_defconfig:BR2_GCC_VERSION_4_3_X=y
Back when those defconfigs were introduced, gcc 4.3 was chosen because
it was the only one capable of building a fully working kernel for
those ARM-based platforms. However, the original submitter, Alexandre
Belloni, no longer has access to the hardware platforms, so he is
unable to test if newer gcc versions have fixed the problem. It
certainly doesn't make sense to keep gcc 4.3.x just for those three
boards, so we'll wait for someone actually using those defconfigs to
complain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_UCLIBC_ARM_TYPE was only used for uClibc 0.9.32 on ARM. Now
that only uClibc 0.9.33 is supported for ARM, there is no point in
keeping BR2_UCLIBC_ARM_TYPE, since the corresponding uClibc options no
longer exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit removes the 0.9.32.1 version of uClibc, which is very old,
and does not bring any specific advantage over 0.9.33, which has been
around for more than two years now.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- The 2.20.x series is old, it no longer makes sense to support it.
- In the 2.21.x series, we still have 2.21.1, so keeping 2.21 doesn't
make much sense, so this patch removes it.
- Similarly for the 2.23.x series, having both 2.23.1 and 2.23.2
doesn't make much sense, so this patch removes 2.23.1 and keeps
2.23.2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested toolchain compiles with binutils 2.22 and 2.24.
Result tested in Qemu 2.0.0. (only little endian version
tested)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that there's a twolame package we can add support for it in mpd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quite some work has been done from 0.8.3 to 1.0.1, and as a result
this commit is very intrusive. The biggest change is the move to an
autotools package.
Then, the options that enable utilities individually have been deprecated
and moved to Config.in.legacy. Instead, we introduce new option to select
either all the utilities. This change loses granularity in favor of
maintainability.
[Peter: needs host-pkgconf. Select and use argp-standalone on uClibc]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is no longer needed now that e244eb12d (xserver_xorg-server: Fix race
condition when installing man pages) has been reverted.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the recent change to the init script the default /etc/default/ntpd file
doesn't do anything, so don't install it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add ntp.conf file to make ntpd syncing.
Starting ntpd daemon with -g to sync time also with big offsets.
Removes the use of deprecated ntpdate command for initial time sync.
[Peter: drop unused NTPDATE_BIN variable]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order for this comment to be properly displayed, it must be moved to be
at the end of the file.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Sagaert Johan in the mailing list mpd 0.18.x fails to
build with gcc 4.9.x
Patch status: sent upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python3-012-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python3-013-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit mainly fixes bug #7268 by improving the isolation of
the build environment by making sure some host environment header
paths do not leak into the target build. The investigation was done by
David <buildroot-2014@inbox.com>. This is done by not calling the
add_multiarch_paths() function of setup.py when we're cross-compiling,
a change made in the newly introduced
python-013-dont-add-multiarch-path.patch.
In addition to this, another patch is added to make sure the build is
aborted when one of the Python module fails to build. This is done in
python-014-abort-on-failed-modules.patch. Without this, the Python
setup.py script simply logs which module failed to build, but doesn't
abort, so it's hard to notice when there is a problem.
[Peter: slightly reword commit message]
Cc: David <buildroot-2014@inbox.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When switching the git helper over to a shell script, a special case was
not carried over: in case the remote has the required reference, we
attempt a shallow clone, using --depth 1. However, this is not supported
when the remote is accessed with the http protocol.
Therefore, the download fails.
What happened before the conversion to a shell script was that the helper
in the Makefile would fallback to doing a full-clone.
This is the case and behaviour that were lost in the conversion.
To avoid making the script too complex, we only attempt a full clone if
needed. And we decide that a full clone is needed by default; we decide
it is unnecessary if the remote has the needed reference *and* the
shallow clone was successful.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch legal-info generation dependency to patch rather than extract
so we can use debian/copyright from debian-maintained packages,
because the *orig* file alone doesn't contain the appropiate file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
librtlsdr is a library and software for using a Realtek RTL2832U based
DVB-T dongle as a cheap SDR.
[Thomas: change license to GPLv2+, reword help text for the detach
driver option.]
Signed-off-by: Jason Pruitt <jrspruitt@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable the phar command-line tool since it requires php to pack itself
up. Fixes build failure for CLI (or CLI+CGI) variants of php.
Hardly useful for embedded scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the _ntp user that the daemon requires to work in any way.
Add a SysV-style initscript as well, but not with '-s' (set time
immediately after startup) because it can make the boot process stall
for a few seconds if there's no proper network connectivity/dns setup.
Make ntp and openntpd mutually exclusive since they overstep each other.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for the TS-5x00 serie of Technologic Systems
x86-based Single Board Computers, featuring an AMD Elan520 processor.
http://wiki.embeddedarm.com/wiki/#AMD
[Peter: explicitly set arch/variant in defconfig, strip trailing spaces]
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few minor updates on the patches were needed to resolve some
conflicts on the main Makefile.pre.in file, in the list of modules to
build/install.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The different patches are just refreshed to apply without fuzz, there
are no changes/conflicts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bzr uses the name of the extension of the output file to known what
output format to use: tar, tgz, tar.bz2... If no extension is
recognised, bzr will output to a directory.
Since we use 'mktemp .XXXXXX' to generate temporary files, it obviously
never ends with a recognised extension. Thus, bzr expects the output to
be a directory, and fails since it is a file.
Fix that by forcing the output format.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add support for the iMX6 based conga-QMX6 family of Qseven modules.
This patch is based on Linux 3.0.35 from Congatec's kernel reporitory
[Peter: slightly simplify post build script]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The init hooks may reference files installed by the package. For
example, when a package installs systemd unit files, and wants them
enabled/disabled by default, the init hook may move/symlink/rename the
unit files.
Currently, the init hooks are called before the package is installed,
thus breaking the use-case above.
Just inverse the install order, so that a package is installed before
its init hooks are called.
Fixes: http://autobuild.buildroot.net/results/5b03174318d8a6dc3112053ff141b70a90869c20/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6f638ea9c9 ("infra: /usr support:
STAGING_DIR can be outside BASE_DIR") changed a for-construct around 'sed
-i' in a 'find | xargs sed -i'. However, if the find returns no results,
sed complains with:
'/bin/sed: no input files'
This commit adds the extra parameter -r / --no-run-if-empty to the xargs
call, effectively fixing this problem case.
Reported-by: Rohit Kumar <rkthebest@gmail.com>
Fix-suggested-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ca-certificates contains sensitive security-related information,
and we want to ensure the archive that we download has not been
compromised.
Add the sha1 and sha256 hashes from Debian's packaging.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Martin Bark <martin@barkynet.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some of the packages that Buildroot might build are sensitive packages,
related to security: openssl, dropbear, ca-certificates...
Some of those packages are downloaded over plain http, because there is
no way to get them over a secure channel, such as https.
In these dark times of pervasive surveillance, the potential for harm that
a tampered-with package could generate, we may want to check the integrity
of those sensitive packages.
So, each package may now provide a list of hashes for all files that needs
to be downloaded, and Buildroot will just fail if any downloaded file does
not match its known hash, in which case it is removed.
Hashes can be any of the md5, sha1 or sha2 variants, and will be checked
even if the file was pre-downloaded.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DL_DIR can be a very precious place for some users: they use it to store
all the downloaded archives to share across all their Buildroot (and
maybe non-Buildroot) builds.
We do not want to trash this location with our temporary downloads (e.g.
git, Hg, svn, cvs repository clones/checkouts, or wget, bzr tep tarballs).
Turns out that we already have some kind of scratchpad, the BUILD_DIR.
Although it is not really a disposable location, that's the best we have
so far.
Also, we create the temporary tarballs with mktemp using the final tarball,
as template, since we want the temporary to be on the same filesystem as
the final location, so the 'mv' is just a plain, atomic rename(2), and we
are not left with a half-copied file as the final location.
Using mktemp ensures all temp file names are unique, so it allows for
parallel downloads from different build dirs at the same time, without
cloberring each downloads.
Note: we're using neither ${TMP} nor ${TMPDIR} since they are shared
locations, sometime with little place (eg. tmpfs), and some of the
repositories we clone/checkout can be very big.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[tested a particular scenario that used to fail: two separate builds
using a shared DL_DIR, ccache enabled, so that they run almost
synchronously. These would download the same file at the same time,
corrupting each other. With the patches in this series, all works
fine.]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we only need to know whether the compiler runs successfully, and
stderr is empty for the success case, there is no need to redirect stderr to
/dev/null. Moreover, stderr output of the failing case reveals valuable
information on the real failure reason.
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the user sets a custom BR2_HOST_DIR, then STAGING_DIR is not under
BASE_DIR. The .pc/.la file fixup commands incorrectly made this assumption
and thus should be corrected.
Additionally, this patch:
- rewords the comment in pkg-autotools that explains the replacements.
- removes a for statement in favor of xargs
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also switch to new homepage and github download, and specify distro
variant since host distro != target distro and sample configs for each
case aren't useful anyway.
It sometimes failed to autodetect because some of the tests can't be
executed when cross compiling (happened on gentoo host).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Eric_L on IRC reported that the following strange behavior: the first
installation of freetype works, and then each time you do "make
freetype-dirclean freetype", it fails and works alternatively, in a
fully reproducible manner.
After some investigation, it turns out that the problem is caused by
the creation of the symbolic link /usr/include/freetype2/freetype ->
/usr/include/freetype2 for backward compatibility reasons by
freetype.mk, in a post-staging installation hook. As the symbolic link
is created *after* the installation, the first installation works
fine. However, the second installation fails because the freetype
build system does:
./builds/unix/mkinstalldirs \
/home/thomas/projets/buildroot/output/target/usr/include/freetype2/config
[...]
rm -f /home/thomas/projets/buildroot/output/target/usr/include/freetype2/freetype/config/*
rmdir /home/thomas/projets/buildroot/output/target/usr/include/freetype2/freetype/config
[...]
/usr/bin/install -c -m 644 ./builds/unix/ftconfig.h \
/home/thomas/projets/buildroot/output/target/usr/include/freetype2/config/ftconfig.h
This last line fails, because due to the symbolic link mentioned above, the
command 'rmdir
/home/thomas/projets/buildroot/output/target/usr/include/freetype2/freetype/config'
has in fact the consequence of deleting the 'config' directory created
by the mkinstalldirs command.
The proposed solution to solve this problem is to remove the symbolic link
in a pre-install hook, run the installation, and restore the symbolic link.
[Peter: minor tweaks to commit message / comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zyre doesn't actually depend on filemq; it just needs czmq and zeromq
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[tested a particular scenario that used to fail, when the 'hg archive'
step is interrupted, now working fine]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Maintaining the download helpers in the Makefile has proved to be a bit
complex, so move it to a shell script.
[Peter: redirect pushd/popd output to /dev/null]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The git download helper is getting a bit more complex. Fixing it in the
Makefile when it breaks (like the recent breakage with a non-existing
sha1-cset) proves to be challenging, to say the least.
Move it into a shell script in support/download/git, which will make
it much easier to read, maintain, fix and enhance in the future.
[Peter: redirect pushd/popd output to /dev/null]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
makeinfo is known to cause problems when building old texi files with more
recent host makeinfo.
In particular binutils-2.18 won't build on Fedora 20 without this change.
Even though more up to date binutils does build without this change there's
no guaranty it will with bump of host makeinfo in the future.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, gettext installs on the target a documentation file
named ABOUT-NLS in /usr/share/gettext, that is clearly not needed for
the proper execution of programs. This commit adds a post-install hook
in gettext.mk to get rid of this file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
IDLE is the Python IDE built with the tkinter GUI toolkit, for which
the main script has always been removed from the target (so it was
never usable in Buildroot). However, we were still installing about
800 to 900 KB of .pyc files used only by the idle editor. This commit
adds a Python patch that completely gets rid of the
compilation/installation of the idle editor. As a consequence, it is
no longer needed to manually remove the 'idle' program from the
target in python.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Status of patches:
- python-013-fix-readline-6.3.patch is removed, as it was a backport
from an upstream fix.
- all other patches are updated, with no special changes other than
solving minor conflicts.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, libffi installs some header files in
/usr/lib/libffi-<version>/include, which is a non-standard location
and therefore they do not get removed automatically by the
target-finalize logic. This commit adds a post-install hook in
libffi.mk to get rid of these unneeded headers on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Status of the patches:
- libffi-001-Fix-installation-location-of-libffi.patch, preserved.
- libffi-002-Fix-use-of-compact-eh-frames-on-MIPS.patch, preserved
- libffi-arc-01-Add-ARC-support.patch, removed, ARC support was
merged upstream as of commit b082e15091961373c03d10ed0251f619ebb6ed76.
- libffi-arc-02-Rebuild-for-ARC-additions.patch, removed, this patch
was merged upstream as of commit
0f8690a84c874ec09a090c8c6adfb93c594acac6.
- libffi-003-fix-typo.patch, added, reported on the upstream mailing
list as being necessary, will be part of the next 3.1.1 release.
- libffi-004-Add-missing-GNU-stack-markings-in-win32.S.patch, same
status as patch 003.
- libffi-005-Fix-paths-in-libffi.pc.in.patch, same status as patch
003.
The 3.1 release adds support for a number of architectures: ARC
support, ppc64le support, NIOS II support. See
https://sourceware.org/ml/libffi-announce/2014/msg00000.html for
details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a problem in other packages when they link against dbus. For
instance, with the dnsmasq package:
/buildroot/output/host/usr/bin/mipsel-ctng-linux-uclibc-gcc --static
-lidn -o dnsmasq cache.o rfc1035.o util.o option.o forward.o network.o
dnsmasq.o dhcp.o lease.o rfc2131.o netlink.o dbus.o bpf.o helper.o
tftp.o log.o conntrack.o dhcp6.o rfc3315.o dhcp-common.o outpacket.o
radv.o slaac.o auth.o ipset.o domain.o dnssec.o blockdata.o
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-ldbus-1 -lpthread
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-lidn -liconv
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-llua -lm -Wl,-Bstatic -lhogweed
-L/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib
-lnettle -lgmp -Wl,-Bdynamic -Wl,-Bstatic -lgmp -Wl,-Bdynamic
/buildroot/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libpthread.a(init.os):
In function `__pthread_initialize_minimal_internal':
init.c:(.text+0x26c): undefined reference to `__libc_setup_tls'
collect2: error: ld returned 1 exit status
make[2]: *** [dnsmasq] Error 1
make[2]: Leaving directory
`/buildroot/output/build/dnsmasq-2.71/src'
When dnsmasq tries to link against dbus it checks the dbus pkgconfig
file to obtain the LIBS that it need to pass to the linker. In the dbus
.pc file you have "-ldbus-1 -lpthread" because -lpthread was used when
building dbus. If you use -pthread when you build dbus, then you will
have -pthread in the dbus .pc file as well.
-lpthread means that we want to link with a library called pthread.
-pthread is a compiler option which will do whatever is needed to be
done to compile with the pthreads standards so that it works.
Fixes:
http://autobuild.buildroot.net/results/7cd/7cdab3b6f74dbfde965300a51e58a377ba30602b/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The OPTIMIZER variable is used to construct CFLAGS for host toolchain.
This breaks the build since we set it to TARGET_CFLAGS, and these may not be
supported by host toolchain. Augment the cross-compile patch to handle
OPTIMIZER so that we can initialize it to TARGET_OPTIMIZER, and override it
when used with host toolchain.
Fixes:
http://autobuild.buildroot.net/results/3f1/3f1afc1b58cb6fe53c438b55f169e2a78238806d/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches that were updated to take into account minor upstream
changes:
- rpcbind-0001-Remove-yellow-pages-support.patch
- rpcbind-0003-Make-IPv6-configurable.patch
Patches that were removed as they were no longer needed thanks to
upstream changes:
- rpcbind-0002-Do-not-try-to-use-NSS-support-when-not-available-in-.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the version of libtirpc to the latest upstream
version 0.2.4, with the following changes on the patches:
Updated to take into account minor upstream changes:
- libtirpc-0001-Disable-parts-of-TIRPC-requiring-NIS-support.patch
- libtirpc-0002-uClibc-without-RPC-support-does-not-install-rpcent.h.patch
- libtirpc-0004-Make-IPv6-support-optional.patch
- libtirpc-0008-Add-rpcgen-program-from-nfs-utils-sources.patch
- libtirpc-0009-Automatically-generate-XDR-header-files-from-.x-sour.patch
- libtirpc-0010-Add-more-XDR-files-needed-to-build-rpcbind-on-top-of.patch
Removed since they were merged upstream:
- libtirpc-0003-Add-missing-INET6-conditional.patch
- libtirpc-0005-rpcent-mark-getrpcbyname-name-argument-as-const-char.patch
- libtirpc-0006-rpcent-remove-prototypes-of-reentrant-variants.patch
- libtirpc-0007-doc-Makefile.am-fix-out-of-tree-installation.patch
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There has been no Blackbox release since 2005, which indicates that
the upstream project is dead. Since there are many other maintained
and alive window manager projects around, I'd like to nominate
Blackbox for deprecation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
portmap and rpcbind must not be selected at the same time. Users
should use rpcbind in favor of the deprecated portmap.
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the deprecation of certain features in 2014.08, add
the BR2_DEPRECATED_SINCE_2014_08 symbol.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And install to /usr/bin/lsof rather than /bin/lsof otherwise we still
keep busybox lsof.
[Thomas: fix patch numbering, two patches had the 0001 sequence
number.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the rule that adds common dependencies to every target in the
"TARGETS" variable, because all those targets are packages that use the
package infrastructure or they depend on targets that use the package
infrastructure. The package infrastructure already adds common
dependencies. Therefore, this rule is useless.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert "system.mk" recipes to "target-finalize" hooks in order to:
- Ensure an ordering even if top-level parallel make is being used.
- Execute "system.mk" commands after the "target-finalize" initial message
is printed so they can be clearly distinguished from packages
building.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add TARGET_FINALIZE_HOOKS to the "target-finalize" rule to be able to
add to it commands as needed.
This is useful for having a nicer output because commands are executed
after the "target-finalize" initial message, also it is useful to ensure
an executing order even when top-level parallel makefile is being used.
Also convert "TARGET_PURGE_LOCALES" to a hook that uses
"TARGET_FINALIZE_HOOKS".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Xtensa gcc does not seem to like output on /dev/null. The applied patch
on dhcpcd is thus unusable, and a more verbose version involving a temporary
file is needed.
Reported-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The use of MAKE1 for uClibc dates back 10 years:
commit 8e5fb3fb4a
Author: Eric Andersen <andersen@codepoet.org>
Date: Sat Dec 11 13:01:10 2004 +0000
Add initial BR2_JLEVEL support, with some exceptions for apps that
have broken 'make -j' support
Since that time there were lots of improvements in uClibc that seem to allow
parallel building of libs finally.
Unfortunately uClibc tests have dependences on previously built files,
that's why tests left with MAKE1.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A .pc file could contain statements of the form:
-L/usr/lib
but also:
-L/path/to/sysroot/usr/lib
The latter form typically occurs when the dependency was configured with a
statement like --with-xxx=$(STAGING_DIR)/usr.
pkgconf only expects the first form, and prefixes it with the specified
sysroot. However, this strategy would result in a double sysroot in the
second case:
-L/path/to/sysroot/path/to/sysroot/usr/lib
This patch checks for the presence of the sysroot in the specified -L or -I
directives, and only adds the sysroot when not already present.
Partially fixes bug #5750 (https://bugs.busybox.net/show_bug.cgi?id=5750)
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
qt5 performs sed replacements of /usr to $(STAGING_DIR)/usr in .la files.
However, if buildroot itself is located in /usr, then STAGING_DIR also
starts with /usr, and naive replacements of '/usr' can result in paths of
the form:
/usr/buildroot/.../sysroot/usr/buildroot/.../sysroot/...
This patch makes the replacements more careful, by first replacing the known
paths BASE_DIR and STAGING_DIR to tokens, then performing the actual
replacement, and finally replacing the tokens with the corresponding paths.
Partially fixes bug #5750 (https://bugs.busybox.net/show_bug.cgi?id=5750)
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
pkg-generic and pkg-autotools both perform sed replacements of /usr to
$(STAGING_DIR)/usr, in .pc and .la files respectively. However, if buildroot
itself is located in /usr, then STAGING_DIR also starts with /usr, and naive
replacements of '/usr' can result in paths of the form:
/usr/buildroot/.../sysroot/usr/buildroot/.../sysroot/...
This patch makes the replacements more careful, by first replacing the known
paths BASE_DIR and STAGING_DIR to tokens, then performing the actual
replacement, and finally replacing the tokens with the corresponding paths.
Additionally it removes the unnecessary making of a backup copy in
pkg-autotools.
Partially fixes bug #5750 (https://bugs.busybox.net/show_bug.cgi?id=5750)
[Thomas: improve pkg-autotools.mk by including the explanation comment
proposed by Arnout.]
Partially-based-on-a-patch-from: Ben Stoltz <benstoltz@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Introduce a BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS Config.in
symbol to be able to easily propagate the architecture
dependencies.
- Wrap the help text, add some more details as suggested by Arnout.
- Propagate the architecture dependencies to the comment, as
suggested by Arnout.
- Remove the dependency of google-breakpad on host-google-breakpad,
since it's not needed.
- Add <pkg>_TARGET = NO, because google-breakpad only installs a
static library, so installation to staging is sufficient.
- Reorder autotools-package/host-autotools-package invocations, as
suggested by Arnout.]
Signed-off-by: Pascal Huerst <pascal.huerst@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We needs three little patches:
- one to make the existing Makefile cross-compile friendly
- one to pass the LDFLAGS at link time
- one to add a missing include
[Thomas: add missing 'depends on BR2_arm' in comment, renumber patches
to start at 0001 and not 0000.]
Signed-off-by: Eric Limpens <limpens@gmail.com>
[yann.morin.1998@free.fr: add .mk header; cleanup and split the
Makefile patch, add missing include; add comments to all patches]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The installation of the network.service and serial-getty.service unit
files are now performed via the <pkg>_INIT_SYSTEMD mechanism instead of
an installation hook.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to add support for the SAMA5D3 Xplained board, this
commit bumps the version of the at91bootstrap3 bootloader to
v3.6.2. While doing this, it also:
- Allows this bootloader on Cortex-A5 based platforms, since SAMA5D3
are based on Cortex-A5.
- Removes a patch that no longer applies, and which has been taken
into account in at91bootstrap3 upstream.
- Switches to the upstream Github location as the source.
- Updates the installation commands to match upstream changes in the
installation process.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends commands cd into the CONFIG_DIR and run the script
from there. However, this means that when $(O) is a relative path, it
will no longer be correct. Therefore, use $(BASE_DIR) instead of $(O).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove trailing space after perl when it's the only dependency
- license: substitution of perl name by BR name
- add a tabulation before source
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The graph-depends script calls make. If the outer make was called
recursively, or if it was called with '-C <somedir>', then the
environment will contain "MAKEFLAGS=w --". Therefore, the recursive
make prints 'Entering' and 'Leaving' messages, which clobbers the
output for dot.
To avoid this, add "--no-print-directory" to the recursive make
arguments. Since we require GNU make 3.81, we can be sure that this
option is available.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a SVN path has been deleted in a future revision, downloading a
package's source will fail using 'svn checkout -r'. Fix using
URL@REV syntax since the SVN command will then verify the path at the
specified version. Without using the URL@REV syntax, the SVN command
will attempt to verify the path exists on the the HEAD revision before
checking out the path at the specified revision.
Error seen if SVN path has been deleted in HEAD using svn checkout -r:
svn: E160013: '/svn/path/' path not found
Signed-off-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This bump reverts e92fb1f90f (radvd: fix
build against older glibc) since Gustavo has contributed a fix
upstream, which was merged in the 1.14 release of radvd.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add license information as well.
It could be "or GPL" as well but since we link to openssl that's a murky path
as stated in the README so just leave it at MIT.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-4617: The do_uncompress function in g10/compress.c in
GnuPG 1.x before 1.4.17 and 2.x before 2.0.24 allows context-dependent
attackers to cause a denial of service (infinite loop) via malformed
compressed packets, as demonstrated by an a3 01 5b ff byte sequence.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the documentation:
"Header: The file starts with a header. It contains the module name,
preferably in lowercase, enclosed between separators made of 80 hashes."
This patch makes the appropriate changes.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a new patch to use pkg-config to detect openssl.
[Peter: fix minor typos in description]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-0244 (Denial of service - CPU loop)
CVE-2014-3493 (Denial of service - Server crash/memory corruption)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2014-0244 (Denial of service - CPU loop)
CVE-2014-3493 (Denial of service - Server crash/memory corruption)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
- Add libtool versioning to the linker flags again. This was accidentially
removed in 0.4.20 but should not cause any problems on platforms other
than OS X (Sebastian Dröge)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d3ccfa362b (avahi: run as avahi user/group instead of default)
changed avahi-autoipd to run as the avahi user, but forgot to update the
init script/systemd config to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tarball no longer available in .gz format. From the release notes:
- Fix list corruption when splitting code memory chunks, causing crashes
when allocating a lot of code memory and trying to free it later
(Tim-Philipp Müller)
- Add some extra checks for the number of variables used in ORC code to
prevent overflows and crashes in the compiler (Vincent Penquerc'h)
- Various compiler warnings, coverity warnings and static code analysis
fixes (Sebastian Dröge)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if we do not save the sources for local or overridden packages because
it is too complex, we can still quite easily save the license files.
Also, having the license files is a very important part of complying with
the licenses.
Move the copy of license files out of the non-local, non-overridden package
case, but still in the case where packages have a _SOURCE defined, to
avoid catching packages bundled in Buildroot (eg. mkpasswd et al.)
Reported-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, if a package is marked _REDISTRIBUTE = NO, then legal-info
will not try to extract it first.
If that package also declares some _LICENSE_FILES, legal-info fails
if it is the only action we're trying to run:
$ cat defconfig
BR2_arm=y
BR2_TOOLCHAIN_BUILDROOT_EGLIBC=y
BR2_PACKAGE_LIBFSLCODEC=y
$ make BR2_DEFCONFIG=$(pwd)/defconfig defconfig
$ make legal-info
[--SNIP--]
cat: /home/ymorin/dev/buildroot/O/build/libfslcodec-3.5.7-1.0.0/EULA: No such file or directory
Fix this by always having legal-info extract the archives if one or
more _LICENSE_FILES are specified.
We do this for all types of packages: overridden, local or 'normal'
remote packages. Even though we do not save the sources for the
overridden or local packages, we need to save their licensing info,
so we need to extract them.
This implies that we now need only PKG-source, not PKG-extract anymore,
as a dependency of legal-info for packages we want to save (ie.
redistributable, non-local and non-overriden packages.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: as noted by Arnout, remove trailing whitespace, and fix the
license to Artistic-2.0. Also, adjust the indentation in
package/Config.in to the new standard.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After the bump to dhcpcd 6.4.0, building dhcpcd with ccache fails at the
configure step:
Using compiler .. <buildroot>/output/host/usr/bin/ccache <buildroot>/output/host/usr/bin/i686-pc-linux-gnu-gcc
<buildroot>/output/host/usr/bin/ccache <buildroot>/output/host/usr/bin/i686-pc-linux-gnu-gcc is not an executable
make: *** [<buildroot>/output/build/dhcpcd-6.4.0/.stamp_configured] Error 1
This patch backports an upstream patch to fix this issue.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2014-1492 - The cert_TestHostName function in lib/certdb/certdb.c in
the certificate-checking implementation in Mozilla Network Security
Services (NSS) before 3.16 accepts a wildcard character that is embedded
in an internationalized domain name's U-label, which might allow
man-in-the-middle attackers to spoof SSL servers via a crafted
certificate.
CVE-2014-1491 - Mozilla Network Security Services (NSS) before 3.15.4,
as used in Mozilla Firefox before 27.0, Firefox ESR 24.x before 24.3,
Thunderbird before 24.3, SeaMonkey before 2.24, and other products, does
not properly restrict public values in Diffie-Hellman key exchanges,
which makes it easier for remote attackers to bypass cryptographic
protection mechanisms in ticket handling by leveraging use of a certain
value.
CVE-2014-1490 - Race condition in libssl in Mozilla Network Security
Services (NSS) before 3.15.4, as used in Mozilla Firefox before 27.0,
Firefox ESR 24.x before 24.3, Thunderbird before 24.3, SeaMonkey before
2.24, and other products, allows remote attackers to cause a denial of
service (use-after-free) or possibly have unspecified other impact via
vectors involving a resumption handshake that triggers incorrect
replacement of a session ticket.
CVE-2013-1740 - The ssl_Do1stHandshake function in sslsecur.c in libssl
in Mozilla Network Security Services (NSS) before 3.15.4, when the TLS
False Start feature is enabled, allows man-in-the-middle attackers to
spoof SSL servers by using an arbitrary X.509 certificate during certain
handshake traffic.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-1545 - Mozilla Netscape Portable Runtime (NSPR) before
4.10.6 allows remote attackers to execute arbitrary code or cause a
denial of service (out-of-bounds write) via vectors involving the
sprintf and console functions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It's there for some historical reason and breaks libpcap with dbus
support for static linkage scenarios (like the one used by tcpreplay).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add initial support for the Lego Mindstorms EV3 programmable brick.
The Lego Mindstorms EV3 brick comprises a Texas Instruments AM1808 SoC, with
an ARM 926EJ-S main processor running at 300 MHz.
https://en.wikipedia.org/wiki/Lego_Mindstorms_EV3
This configuration uses the Linux kernel of the ev3dev project.
https://github.com/mindboards/ev3sources
More info is available in the board/lego/ev3/readme.txt file, shamelessly
documented in the same way as the SoCkit folks did.
[Peter: lock kernel headers to match]
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All of the new toolchain requirements (ipv6, threads, rpc) aren't
actually new - this package failed to build for ages, it just wasn't
picked up by the autobuilders because the main Makefile just doesn't
care about bailing out properly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: check for avahi-daemon, not just the base avahi package]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump knock to version 0.7 and switch away from a git snapshot, it's
nicer and avoids the need to autoreconf.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream removed support for libxml2 as xml backend, select expat
unconditionally.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Unfortunately the gitorious page/wiki says nothing useful so use the
elinux.org page for now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-1684: The ASF_ReadObject_file_properties function in
modules/demux/asf/libasf.c in the ASF Demuxer in VideoLAN VLC Media
Player before 2.1.3 allows remote attackers to cause a denial of service
(divide-by-zero error and crash) via a zero minimum and maximum data
packet size in an ASF file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently we configure uClibc to use kernel headers from "staging" folder with
KERNEL_HEADERS="$(STAGING_DIR)/usr/include". This path is added to include
search path of uClibc build system in Rules.mak "CFLAGS += -I$(KERNEL_HEADERS)".
At the same time on uClibc installation to "staging" we point to the same
location "$(STAGING_DIR)/usr" (headers effectively go in "usr/include").
So after every installation to "staging" dependences get touched (even though we
copy the same headers every time) and so we may see lots of sources in uClibc
get rebuilt.
This has 2 consequences:
1. Longer build time - becase even on ordinary buildroot build uClibc is built
twice. On "uclibc building" and on "uclibc installation to target".
2. Symbols in libuClibc built initially (that is later installed in
"staging/sysroot") are situated with different offset compared to second build
(later copied in "target"). This happens because as described above only part
of sources get rebuilt and then on final linkage object files are linked in
different order.
And (2) leads to problems on remote rebugging: gdbserver reports offsets that
correspond to pointless assembly in libuClibc on host.
Here's how it looks like.
Before this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000c42c 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
After this patch:
$ cd ~/br2_output/i586/target/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
$ cd ~/br2_output/i586/staging/lib
$ i586-buildroot-linux-uclibc-readelf -s libuClibc-0.9.33.2.so | grep kill
423: 0000b518 54 FUNC GLOBAL DEFAULT 7 kill
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Noam Camus <noamc@ezchip.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fltk buildsystem no longer tries to strip binaries during installation,
so these can be dropped.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For example, if your project is known to require more space than the
default max cache size, then you might want to increase the cache size
to a suitable amount using the -M (--max-size) option.
The string you specify here is passed verbatim to ccache. Refer to
ccache documentation for more details.
These initial settings are applied after ccache has been compiled.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 433290761f changed the hard-coded
ccache directory location to use BR_CACHE_DIR (then BUILDROOT_CACHE_DIR),
which is exported by Makefile based on the BR2_CCACHE_DIR config option.
This allowed the cache location to be changed on-the-fly by setting a
"make" command line variable, but left the default location of ccache's
normal default at "$HOME/.ccache". Since this location does not match the
default for BR2_CCACHE_DIR, it is basically almost never correct, so
direct invocation of ccache outside of the buildroot Makefile, such as for
increasing the cache size, becomes cumbersome.
This patch changes the last-ditch cache location from "$HOME/.ccache" to
the BR_CCACHE_DIR value defined when host-ccache is configured. Note that
the ability to later override the cache location by using a BR_CACHE_DIR
command line variable is left intact.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove the specific check that was done in dependencies.sh to use the
generic one that were introduced by the previous patch.
Also, introduce, BR2_NEEDS_HOST_JAVAC and BR2_NEEDS_HOST_JAR as it is
needed by classpath.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sources of the mkpasswd package are shipped with Buildroot, rather than
downloaded from an external location. As a result, no explicit version is
defined, causing build messages and build directory to show 'undefined' as
version.
This patch sets the version for mkpasswd to 'buildroot-$(BR2_VERSION), which
would for example expand to 'buildroot-2014.05'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The sources of the makedevs package are shipped with Buildroot, rather than
downloaded from an external location. As a result, no explicit version is
defined, causing build messages and build directory to show 'undefined' as
version.
This patch sets the version for makedevs to 'buildroot-$(BR2_VERSION), which
would for example expand to 'buildroot-2014.05'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch migrates the toolchain and toolchain-buildroot packages to the
virtual package infrastructure, causing the log messages to change from:
>>> toolchain undefined Downloading
>>> toolchain undefined Extracting
...
to
>>> toolchain virtual Downloading
>>> toolchain virtual Extracting
...
and similar for 'toolchain-buildroot', simply because it looks nicer.
At the same time, the directory names also become toolchain-virtual,
toolchain-buildroot-virtual instead of the corresponding 'undefined'
variants.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The inner-xxx-targets in the buildroot package infrastructures are
evaluated using $(eval) which causes variable references to be a bit
different than in regular make code. As we want most references to be
expanded only at the time of the $(eval) we should not use standard
references $(VAR) but rather use double dollar signs $$(VAR). This includes
function references like $(call), $(subst), etc. The only exception is the
reference to pkgdir/pkgname and numbered variables, which are parameters to
the inner block: $(1), $(2), etc.
This patch introduces consistent usage of double-dollar signs throughout the
different inner-xxx-targets blocks.
In some cases, this would potentially cause circular references, in
particular when the value of HOST_FOO_VAR would be obtained from the
corresponding FOO_VAR if HOST_FOO_VAR is not defined. In these cases, a test
is added to check for a host package (the only case where such constructions
are relevant; these are not circular).
Benefits of these changes are:
- behavior of variables is now again as expected. For example, setting
$(2)_VERSION = virtual in pkg-virtual.mk will effectively work, while
originally it would cause very odd results.
- The output of 'make printvars' is now much more useful. This target shows
the value of all variables, and the expression that led to that value.
However, if the expression was coming from an inner-xxx-targets block, and
was using single dollar signs, it would show in printvars as
VAR = value (value)
while if double dollar signs are used, it would effectively look like
VAR = value (actual expression)
as is intended.
This improvement is for example effective for FOO_DL_VERSION, FOO_RAWNAME,
FOO_SITE_METHOD and FOO_MAKE.
The correctness of this patch has been verified using 'make printvars',
'make manual' and 'make legal-info' before and after applying this patch,
and comparing the output.
Insight-provided-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add and enable a systemd unit file to bring up or down network with ifup /
ifdown, analogous to the skeleton/etc/init.d/S40network init script.
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
[eric.le.bihan.dev@free.fr:
- rebase
- install service only if systemd-networkd is not selected]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the switch to 4.8.x as default, the qemu-sparc target is broken.
For a gcc bug report see here:
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=60624
Switch back to gcc 4.7.x as default for sparc.
Disable 4.8/4.9 as suggested by Thomas Petazzoni.
I even disabled gcc snapshot, it works right now, because
it is an old 4.8.0 snapshot by default, but as soon as this is updated
sparc build will break.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel headers version 3.8.x has been deprecated since 2013.08 and thus can
be removed in 2014.08.
An automatic selection of 3.9.x headers is performed in the legacy menu.
Existing automatic selections of 3.8.x headers are modified to select
3.9.x.
As this patch removes the last occurrence of BR2_DEPRECATED_SINCE_2013_08,
the symbol is removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of security issues and adds support for PUT/DELETE. From the
release mail:
<snip>
Stephen Röttger reported a number of security bugs, the most serious of
which is a potential heap overflow in sliding_buffer.c (file uploads).
There is a potential for remote code execution.
At the same time, I've made an *experimental* change to allow RESTful
API's possible:
* PUT and DELETE methods are handled by the POST and GET handlers.
* For mostly historical reasons, data on the URI is still called
GET.<var>, and data in the body is named POST.<var>
* If the Content-Type is not "application/x-www-form-urlencoded", Haserl
won't try to urldecode the POST contents - it will just put the body in
POST.body verbatim.
</snip>
The lua handling now uses pkg-config, so adjust the code to match.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NM provides a newt based UI. One can create, modify and delete NM
connections via this interface.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'graph-depends' logic uses the 'dot' program from Graphviz to draw
the dependency graph, but it doesn't check its existence before
starting the generation of the graph, which can lead to user confusion
as reported in:
http://lists.busybox.net/pipermail/buildroot/2014-June/099278.html
With this commit, we first test if the 'dot' program is available, and
if it's not, we error out with a clear error message:
$ make graph-depends
ERROR: The 'dot' program from Graphviz is needed for graph-depends
make: *** [graph-depends] Error 1
[Peter: send error message to stderr instead]
Reported-by: Dallas Clement <dallas.a.clement@gmail.com>
Cc: Dallas Clement <dallas.a.clement@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
And while we're at it, factorize the definition of the musl version,
since it's common to the definition of the tarball names for the
various supported architectures.
[Peter: Adjust Config.in info to match new version]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The transitive dependencies make the graphs barely readable for large
configs, with a large number of packages.
So, just switch to not drawing the transitive dependencies by default.
By popular demand... ;-)
[Peter: reword]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc; Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch provides service files for using psplash on embedded devices
running systemd:
- psplash-start.service: start psplash.
- psplash-quit.service: kill psplash when reaching multi-user.target
The following kernel command line options should also be set:
systemd.show_status=0 quiet splash
The option "systemd.show_status=0" is required, because, unlike Plymouth,
psplash does not have real systemd integration, i.e. it will not perform:
kill(1, SIGRTMIN + 21);
Note that no progress messages will be printed on the splash screen.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch installs a copy of libgcrypt.m4 from the libgcrypt source tarball
to systemd m4 directory.
Libgcrypt uses a custom m4 macro and not pkg-config to check if the
development files are available. Though libgcrypt support is optional in
systemd, this macro should be available whenever autoreconf is used,
otherwise the re-configuration will fail with:
configure.ac:616: warning: macro 'AM_PATH_LIBGCRYPT' not found in library
The call to autoreconf is required, as it is needed by the patch which
solves the `ln --relative` issue.
As asking the user to install the development package of libgcrypt on
the host machine or adding libgcrypt as a build dependency to systemd is
not acceptable, the required file is added to the m4 directory.
Fixes: http://autobuild.buildroot.net/results/1524d346fa17749e2ae62e063b9cfdd0de95c76a/
Fixes: http://autobuild.buildroot.net/results/10bcd92437eaa27eb61f8281c93efcb53d555e35/
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A tag has been created, so we should uses it.
This bump of version integrates the patch we had so there is no need for
it anymore.
Also, with this tag, faifa changed it's license to BSD-3c.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/77e/77e4123a3ddc934efedf4b09adc2436421ee70b3/
liblua only uses libdl when dynamic linking is used, and certain toolchains
(E.G. bfin) doesn't provide a libdl - So only link against it if it is
needed.
At the same time change it pass the library in LIBS instead of LDFLAGS so it
ends up at the end of the linker cmdline.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes sure that a patch adding a package shows in which menu the
package is added.
Before this commit, the patch has something like this:
> diff --git a/package/Config.in b/package/Config.in
> index 7800f23..433312e 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -864,6 +864,7 @@ source "package/googlefontdirectory/Config.in"
> source "package/haveged/Config.in"
> source "package/mcrypt/Config.in"
> source "package/mobile-broadband-provider-info/Config.in"
> +source "package/mypackage/Config.in"
> source "package/shared-mime-info/Config.in"
> source "package/snowball-init/Config.in"
> source "package/sound-theme-borealis/Config.in"
[> added to avoid git-am recognizing this as the patch]
After this commit, the function marker shows in which menu the new
package was added:
> diff --git a/package/Config.in b/package/Config.in
> index b1111c8..7e6e1a4 100644
> --- a/package/Config.in
> +++ b/package/Config.in
> @@ -864,6 +864,7 @@ menu "Miscellaneous"
> source "package/haveged/Config.in"
> source "package/mcrypt/Config.in"
> source "package/mobile-broadband-provider-info/Config.in"
> + source "package/mypackage/Config.in"
> source "package/shared-mime-info/Config.in"
> source "package/snowball-init/Config.in"
> source "package/sound-theme-borealis/Config.in"
To keep things consistent, this is done for Config.in.host there, even
though we don't have sub-menus there at the moment.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
supervisor has a runtime dependency on python-setuptools which was not
expressed in its Config.in file. When running supervisor without setuptools,
one gets:
Starting supervisord: Traceback (most recent call last):
File "/usr/bin/supervisord", line 5, in <module>
from pkg_resources import load_entry_point
ImportError: No module named pkg_resources
Partially fixes bug #7184 (https://bugs.busybox.net/show_bug.cgi?id=7184)
Reported-by: Sebastian Himberger <sebastian@himberger.de>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems there won't be any new release soon (or ever), so update to the
latest pre version for better functionality (non-ASCII ESSIDs, bigger
scan buffer for example).
Also update the bzero deprecation patch since it missed some instances.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To get reproducable builds depend on libiconv if needed.
tvheadend configure either shows
checking for cc libiconv ... fail
or
checking for cc libiconv ... ok
depending on the presence of libiconv, and gets linked
output/host/usr/bin/i586-buildroot-linux-uclibc-readelf -a output/target/usr/bin/tvheadend | grep NEEDED | grep iconv
0x00000001 (NEEDED) Shared library: [libiconv.so.2]
Please note that libiconv is not a hard-dependency.
Tested with minimal defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_INET_IPV6=y
BR2_PACKAGE_LIBICONV=y
BR2_PACKAGE_TVHEADEND=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This variable is looked up by the Makefile throught a git command line
invocation.
Since we don't keep the '.git' folder in the packages when we clone
them, the command line fail to find anything.
Even worse, it can keep going up the tree until it finds buildroot's
'.git' directory.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SDK 5_01_01_01 only support EABIhf so 5_01_00_01 is still used if
EABIhf is not available.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also install the SysV initscripts from the proper hook.
Since the scripts check for the proper files to be present there's no
need to exclude them according to options since they won't try to start
anything.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The perl-cross tarball allows to patch the Perl distribution (in a
_POST_EXTRACT_HOOKS). The github helper gives a copy of the project which
allows to build this tarball. So, the github helper can not be used here.
[Peter: mention the change to github]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ExtUtils::MakeMaker adds all the header files used by the perl as
dependencies to the generated Makefile. This means that the generated
Makefile will depend on the system's header files.
Usually this is not a problem, because when building the target package,
these header files will indeed be found in $(STAGING_DIR). However, some
distro's add an extra header file to the system's perl. This header is
also included in the generated Makefile, which makes the build fail
because it doesn't exist in $(STAGING_DIR).
As a work-around, explicitly create this header file in $(STAGING_DIR).
It doesn't hurt to create it even if the system perl doesn't need it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0591 (a crafted query against an NSEC3-signed zone can
crash BIND).
The 9.9.x series is the new ESV vesion, 9.6.x has been retired.
Also cleanup the initscript while at it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit significantly reduces the build time of host-gettext and
gettext, by using the capacity of gettext to handle build things in a
certain subdirectory:
- For the host variant of gettext, we only need the gettext-tools,
available in the directory of the same name in the gettext sources.
- For the target variant of gettext, we only need the gettext library
libintl, available in the gettext-runtime directory in the gettext
sources.
So by using appropriate values of GETTEXT_SUBDIR and
HOST_GETTEXT_SUBDIR, we only build what's necessary. Moreover, by
manually patching gettext-tools/Makefile.in and
gettext-runtime/Makefile.in, we make sure to not build and install
things like examples, documentation and so on.
In addition to this, these changes avoid the need to autoreconfigure
the gettext package, which was particularly long.
Thanks to these changes, the build time of gettext goes from 1 minutes
and 37 seconds to just 24 seconds, and the build of host-gettext goes
from 2 minutes and 18 seconds to 1 minute and 13 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit removes the BR2_PACKAGE_GETTEXT_TOOLS option, which could
be used to install gettext tools on the target. This is not needed,
because Buildroot is not designed to provide a full development
environment on the target, and gettext translation files should be
processed on the build machine, using the host gettext tools.
Remove this option will allow to optimize the build time of gettext on
the target, by only building the gettext runtime libraries.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Commit 9ff640ae30 ("minidlna: needs
gettext and host-gettext tools if locale is enabled") modified the
minidlna package to fix gettext related issues. As part of this patch,
a select of BR2_PACKAGE_GETTEXT_TOOLS was added, which according to
the commit title is used to have host-gettext tools installed.
However, this is not what this option is about: this option is about
having gettext tools installed on the target.
Since this is not what minidlna needs, and we anyway plan to remove
this BR2_PACKAGE_GETTEXT_TOOLS option, this commit removes this
incorrect select statement.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Tested-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds support for two ADI Blackfin toolchains: the 'stable'
2014R1 based on gcc 4.3, and the 'experimental' 2014R1 based on gcc
4.5.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Linaro toolchains are released so frequently (every month) that it
doesn't make much sense to support 3 consecutive versions. So, like we
do for ARM big-endian, let's support only one version at a time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When getting the sysroot used for the kernel headers version check,
passing TOOLCHAIN_EXTERNAL_CFLAGS causes a problem when used with
multilib toolchains, where only the main sysroot has the header files,
and the other sysroots only have the libraries.
Since the kernel headers version used is normally the same for all
sysroots, this commit solves this problem by removing the
TOOLCHAIN_EXTERNAL_CFLAGS argument when calling
toolchain_find_sysroot, so that it returns the main sysroot, in which
<linux/version.h> can be found for the kernel headers version check.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Since the introduction of the kernel headers Config.in options, the
external toolchain logic had a check for custom external toolchains to
verify that the kernel headers version entered by the user matches the
one of the toolchain. However, this check was not made for non-custom
external toolchains (i.e the built-in profiles, such as Linaro,
CodeSourcery and al.), making the assumption that the Buildroot
developers will do the right selection.
However, it is quite nice when bumping external toolchains to have
this automatic kernel headers version check, to ensure we select the
appropriate kernel headers version.
Therefore, this commit makes the kernel headers version check
applicable to non-custom external toolchains.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- fix license version: the license is GPLv2+, not GPLv2
- make sure the ncurses backend is selected if none of the other
backends are selected.
- add dependency on libiconv of the curses and gtk2 backends, needed
in !locale configurations.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Reviewed-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_15 to select
BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_14 and not itself.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add missing select of BR2_PACKAGE_LIBUSB, since
BR2_PACKAGE_LIBUSB_COMPAT depends on it
- Add missing thread dependency, since libusb requires threads.
- Add missing wide-char dependency. Without wide char support,
sispmctl doesn't build.
- Rewrap the Config.in help text, and remove trailing whitespaces.
- License is GPLv2+, not GPLv2.
- Remove --disable-dependency-tracking from <pkg>_CONF_OPT. That's a
global, standard, autoconf option, and there's no reason to pass it
at the per-package level.]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
linux-zigbee is a mix of utility tools that implements a 802.15.4 stack
along with a usefull library for any program that would need to use this
stack.
Note that the name is mislead, for licensing reason, this does *NOT*
implement the ZigBee protocol.
[Thomas:
- add dependency on threads, propagated from libnl
- improve the Config.in description by borrowing more text from the
upstream website
- fix the prompt of sub-options to be more consistent, and add help
texts where appropriate
- fix indentation of the BR2_PACKAGE_LINUX_ZIGBEE_TESTS option help
text
- add missing dependencies on host-pkgconf, host-flex and host-bison
- add missing SoB line in the patch disabling test-serial. Maxime is
a well-known contributor, so I assumed we had his SoB.
- fix indentation of <pkg>_CONF_OPT.
- remove <pkg>_INSTALL_STAGING = YES since the package does not
install any library, and the two headers it installs are available
through the toolchain kernel headers.
- add comment to explain <pkg>_AUTORECONF = YES.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump zedboard defconfig to version 2014.1. This makes it possible to use
uboot-spl instead of the xilinx specific fsbl. However, the result is kinda
hacky due to the licensing state of ps7_init.{c,h} needed for building uboot
spl. Directions for building a proper boot.bin using the new methodolgy is
included in the readme.txt.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's currently in a non-working state since it requires a couple of
extensions that don't build at the moment (they try to execute tests in
configure) and also requires a target compiler.
So remove it to avoid false expectations and reclaim target space back
of about 1.5 MiB.
[Thomas: slightly reword comments.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package is host-only, so there's no point in specifying
INSTALL_STAGING = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package is host-only, so there's no point in specifying
INSTALL_STAGING = YES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gcc graphite optimisations such as loop-interchange, blocking
and loop-flattening, also known as graphite are an optional feature of
gcc that is very well supported since about gcc version 4.5.
This patch adds support for graphite for the toolchain as an optional
flag for versions 4.8 onwards as an optional flag, that is disabled by
default.
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
CLooG is a free software and library to generate code for scanning
Z-polyhedra.
cloog is needed for the optional graphite optimisations that are
supported by gcc since version 4.5. Therefore this package is required
for the toolchain to support graphite.
Graphite optimisations primarily involve loop blocking flattening and
interchage so are probably of mimimal use in an embedded system where
small sizes are favoured.
cloog depends on isl.
[Thomas:
- Add patch to add missing CMake related files to the release
tarball, preventing the build from succeeding.
- bump to 0.18.2
- disable libtool patch, which doesn't apply]
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
isl is a library for manipulating sets and relations of integer points
bounded by linear constraints.
isl is needed for the optional graphite optimisations that are supported
by gcc since version 4.5. Therefore this package is required for the
toolchain to support graphite.
Graphite optimisations primarily involve loop blocking flattening and
interchage so are probably of mimimal use in an embedded system where
small sizes are favoured.
[Thomas:
- bump to 0.12.2 (cannot use 0.13, incompatible with cloog 0.18.2,
comment added about this)
- use .bz2 tarball
- disable libtool patch, which doesn't apply]
Signed-off-by: Steve Thomas <scjthm@live.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the symlinks in the generated filesystems will have the
UID of the user running the build, because 'chown' does not change
the ownership of symlinks, by default.
Although the implications are limited, some may not want that UID
to leak in the generated filesystems.
So, use 'chown -h' so even symlinks get properly chowned.
Reported-by: Angelo Dureghello <angelo@barix.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add two uClibc 0.9.33.2 patches which fix issues relating to high signal
number handling on MIPS.
The first patch (0056) fixes _NSIG (and as a result __SIGRTMAX) to match
glibc. This fixes GDB on MIPS with uClibc, which cannot handle
__SIGRTMAX == 128 and emits the error:
GDB bug: target.c (gdb_signal_from_host): unrecognized real-time signal
This patch is from uClibc commit 2da958760f79 (MIPS: set _NSIG to
128, not 129. This matches glibc.) and applies without conflicts.
The second patch (0057) fixes the wait status macros to correctly
interpret status 0x007f on MIPS (other arches don't have signal 127).
This patch is from uClibc commit 4a96b9486871 (bits/waitstatus.h:
correctly interpret status 0x007f on MIPS) and applies without
conflicts.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add uClibc 0.9.33.2 patch to fix arch specific eventfd definitions,
particularly EFD_NONBLOCK. The definition in sys/eventfd.h was 04000
(0x800), however MIPS uses 0200 (0x80). This resulted in QEMU built for
MIPS hanging at various points until input is received due to a blocking
poll of stdin.
The patch is a backport of uClibc commit fd355bc1dbcb (eventfd.h: Use
new "bits/" scheme for arch-specific flags). The only conflict was minor
in Makefile.in.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using only -I${includedir} in common practice.
Settings only -I${includedir}/GLES2 breaks Qt5's CMake files,
because at configure time CMake only searchs the paths reported
by pkg-config, and not even /usr/include is used as default.
Even though pkg-config strips out standard include path, that's not
the case with pkgconf (which we are using) in cross-compilation,
which correctly reports the /usr/include dir prefixed with the
sysroot.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we just use what a package declares as its dependencies.
But some packages may declare the same depdency more than once. For
example, php has two options to add SQL support: 'mysql' or 'mysqli',
which are not exclusive. So, php.mk has mysql twice as a dependency.
Although that does not cause any grievance for make, we end up generating
dependency graphs where this duplicate dependency is visible.
Add an intermediary variable which contains the $(sort)-ed list of the
dependencies, thus eliminating any duplicates.
This has the side effect of also sorting the list, which is probably
good for reproducibility anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first patch "use-pkg-config-instead-of-python-config" has been applied
upstream.
The flag _GNU_SOURCE is now always defined in Makefile, so it can be removed
from trace-cmd.mk
CPPFLAGS are appended to CFLAGS and are used to add extra flags, but the flag
_LARGEFILE64_SOURCE in TARGET_CPPFLAGS is already defined in source files,
which causes a build error. As for CFLAGS, we fix this by filtering out our
definition of _LARGEFILE64_SOURCE from the CPPFLAGS before passing them to the
trace-cmd Makefile.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
faifa is a library and a cli used to manage PLC hardware that use
Intellon chipset. Almost everybody use theses chips nowadays.
[Thomas: license is GPLv2+, not GPLv2. Fix indentation. Add dependency
on host-autoconf and a comment to explain what's going on. Fix
indentation of target/staging installation commands. Mark the package
as not available for static library builds as it always build a shared
library. Rewrap Config.in help text.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
$(TARGET_DIR)/usr/lib/perl5/$(PERL_VERSION)/$(PERL_ARCHNAME)/CORE contains include files.
*.bs & .packlist files come with perl or perl/cpan packages.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the list of virtual packages as an appendix to the manual.
Also reference this list from appropriate locations elsewhere in
the manual:
- in section 7.2.2. "Config.in file", after the existing explanations
on dependencies on target and toolchain options, on a linux kernel,
and on udev /dev management,
- in section 7.2.10. "Infrastructure for virtual packages", in the
provider Config.in and .mk explanations, to have the list of existing
symbols to select (in Config.in) and packages to provide (in .mk).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate an asciidoc table that can be included in the manual, that
lists the existing virtual packages, the corresponding symbols, and
their providers (and sub-options thereof).
The core of this change is the addition of a new formatter for virtual
packages. This formatter is a bit tricky, as it has to catter for a
bunch of corner cases:
- provider is not a package, but is sub-options of a package
- such a sub-option may be itself 'select'-ed by one or more
other sub-options
- legacy packages should not be considered as a provider
Those cases are real:
- sub-options of mesa3d provide EGL or GLES
- selected sub-options of mesa3d provide GL
- udev is a legacy package, but it provides udev
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we can generate two different tables of packages:
- a single-column table with the symbols' prompts,
- a two-column table with the symbols' prompts and locations in the
menuconfig.
For virtual packages, this is not enough, since we will have to display
more columns, with different content:
- the virtual package name (but such symbols do not have a prompt)
- the symbol name
- the providers for the virtual package
So, instead of having a single function that knows how to generate any
table, introduce a formatter function that is passed as argument to,
and called by format_asciidoc_table(). Such formatter functions are
responsible for providing:
- the layout of the table (number of columns, column arrangement),
- the formatted header line,
- a formatted line for a symbol.
What the formatter should ouput depends on its arguments:
- if none are passed, the layout is returned,
- if the header label is passed, it returns the formatted header line,
- otherwise, it returns the formatted line for a symbol.
Two formatter functions are introduced in this changeset, to replace the
current 'sub_menu' feature:
- _format_symbol_prompt() to display a one-column table with only the
symbols' prompts,
- _format_symbol_prompt_location() to display a two-column table with
the symbols' prompts and locations.
This will help us to later introduce a new formatter to generate a table
for virtual packages.
[Thanks to Samuel for his pythonistic help!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When generating the package lists, the responsibility to decide what is
actually a package symbol is currently split between the _is_package(),
the get_symbol_subset() and the format_asciidoc_table() functions.
The two latter functions check that an item is really a symbol, and that
is has a prompt.
While this is currently correct for real packages, this will no longer
be the case when we also generate a list of virtual packages, since they
do not have a prompt.
Move the responsibility to verify that a symbol is indeed a package symbol
to _is_package(), so it's all in one place, and makes it easier to change
for virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a package has both a 'real' and a 'virtual' definition, consider it
is a virtual package and do not display it in the generated package list.
This is the case for jpeg and cryptodev, that are virtual packages, but
also real (but empty) packages used to provide a prompt to enable/disable
a choice to select an implementation. In this case, we do not want to
list the virtual packages, but only their implementations.
So, consider packages that are both real and virtual as virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Prepare to tell apart real packages from virtual packages.
Currently, the code implicitly recognises only real packages, and
discards virtual packages, because of the heuristic used to recognise
whether a symbol is a package:
- for real package:
- symbols : BR2_PACKAGE_FOO
- .mk files: foo.mk
- for virtual packages:
- symbols : BR2_PACKAGE_HAS_FOO
- .mk files: foo.mk
The current heuristic is to check for each symbol if a corresponding .mk
file exists, by stripping 'BR2_PACKAGE_' from the beginning of the symbol,
converting the result to lowercase, and checking if a .mk file exists.
So, as a side effect, it completely misses the virtual packages [*], which
is pretty nice since we get a list with only real packages that the user
can indeed select and see in the menuconfig.
[*] Except for 'cryptodev' and 'jpeg' which are both virtual packages and
normal packages. Except they are not normal packages, they are used to
display a choice of the implementation to use. This case will be fixed in
follow-up patches.
Since we'll soon need to also output the table of virtual packages, we
need to teach the _is_package() function to recognise them as well.
This patch is the first step into that direction: it introduces a new
function _is_real_package() that is just a wrapper to _is_package(), which
gains a new parameter, being the type of packages to filter on.
No behavioural change is made in this patch, it is just a preparatory
patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rename the prompt for mesa3d so that it matches what we usually do
for prompts of packages: just name the package in lower case.
This will help generate nicer tables in the generated packages list,
both in existing tables, and in the upcoming table of virtual packages.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the virtual package jpeg is a special virtual package,
as it offers a choice for its implementation, rather than letting the
user enable them manually.
In so doing, it defines its _HAS option as a 'def_bool y' rather than
letting each implementation 'select' it.
Since we are going to generate a list of virtual packages and their
providers, this defeats the heuristic used to find providers.
Coming with an alternate heuristic that also matches the jpeg
package is quite complex, so better and easier to make it look more
like any other virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the virtual package cryptodev is a special virtual package,
as it offers a choice for its implementation, rather than letting the
user enable them manually.
In so doing, it defines its _HAS option as a 'def_bool y' rather than
letting each implementation 'select' it.
Since we are going to generate a list of virtual packages and their
providers, this defeats the heuristic used to find providers.
Coming with an alternate heuristic that also matches the cryptodev
package is quite complex, so better and easier to make it look more
like any other virtual package.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Kids nowaday seem to prefer a left-to-right drawing rather than the
more conventional and historical top-down drawing.
Rather than multiply the number of environment variables, just add
a single one where the user can pass arbitrary dot options, such as:
make BR2_GRAPH_DOT_OPTS=-Grankdir=LR graph-depends
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Merge the redundant-dependencies elimination into the newly introduced
transitive-dependencies elimination.
This makes the code cleaner and much shorter, because:
- the ('all',pkg) redundant dependency is in fact a transitive
dependency, and we now have code to deal with that
- the (pkg,'toolchain') dependency is easy enough to deal with that
having a separate function for that is overkill
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, all the dependencies of a package are drawn on the dependency
graph, including transitive dependencies (e.g. A->B->C and A->C).
For very big graphs, with lots of packages with lots of dependencies, the
dependency graph can be very dense, and transitive dependencies are
cluttering the graph.
In some cases, only getting the "build-order" dependencies is enough (e.g.
to see what impact a package rebuild would have).
Add a new environment variable to disable drawing transitive dependencies.
Basically, it would turn this graph:
pkg1 ---> pkg2 ---> pkg3 -------------------.
|\__________/ \ \
|\____________________ \ \
| \ \ \
`-> pkg4 ---> pkg5 ---> pkg6 ---> pkg7 ---> pkg8
\__________/
into that graph:
pkg1 ---> pkg2 ---> pkg3 -----------.
| \
`-> pkg4 ---> pkg5 ---> pkg6 ---> pkg7 ---> pkg8
[Thanks to Samuel for the parser hints]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make ti-gfx working on BeagleBone Black by adding an ugly necessary
patch to the kernel wich fix:
pvrsrvkm: Unknown symbol v7_dma_map_area
pvrsrvkm: Unknown symbol v7_dma_flush_range
Add drivers to the default kernel config used in beaglebone_defconfig
to enable the framebuffer.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A new configuration option is available in systemd menu, to enable
support for SMACK.
For this feature to properly work, systemd requires attr (build
dependency, also used for other features) and smack (runtime dependency).
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using "poweroff" instead of "halt" has the side advantage of flashing
the "ACT" LED 10 times (@ ~1Hz) to instruct the user when it is safe
to unplug the power supply.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch bumps systemd to v213.
This new version introduces systemd-timesyncd, a SNTP daemon. This
feature can be enabled if systemd-networkd is selected via the
configuration menu. It is a simple alternative to ntpd, useful for
machines without a RTC.
The patch for reverting the use of --relative option when calling `ln`
has been refreshed, as the configure script now checks if `ln` supports
the --relative option and fails if it does not.
Another patch for the proper deactivation of gtk-doc has been added.
All these steps now require an autoreconf.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change reverts the commit 5e3b1f31b3
because rpi-userland is correctly built whatever the value of the
BUILD_SHARED_LIBS CMake flags.
The cset 5e3b1f31b3 originally intends to
fix linkage/runtime failure in xbmc package because of missing flags in
xbmc LIBS env. var. This has been fixed in the previous patch.
So, for rpi-userland package, BUILD_SHARED_LIBS does no longer need to
be forced to OFF, and can safely be driven by the CMake infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds a patch fix the missing install rules for libvcilcs.
This is a pre-requisite to be able to build the shared libraries of the
rpi-userland package, and most importantly avoid linkage failure (at
link-time and/or runtime) in others libraries that link with it.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When rpi-userland libraries are built as shared-objects, not all needed
libraries are passed in the LD_FLAGS, leading to failure at linkage.
To avoid this issue, set the LIBS variable content in accordance with the
INCLUDES variable value.
The commit 5e3b1f31b3 currently works
around this issue by forcing rpi-userland to be statically linked,
whereas it is actually a LIBS flags problem in xbmc package.
A follow-up patch fixes rpi-userland package.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When rpi-userland libraries are built as shared-objects, not all needed
libraries are passed in the LD_FLAGS, leading to failure at linkage.
To avoid this issue, set the LIBS variable content in accordance with
INCLUDES variable value.
This is needed because libcec does not use pkg-config to look for the
ldflags needed for -lbcm_host, even though bcm_host provides a .pc
file (even a correct one!)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes error during xbmc configure:
yasm not found, use --disable-yasm for a crippled build
If you think configure made a mistake, make sure you are using the latest
version from Git. If the latest version fails, report the problem to the
ffmpeg-user@ffmpeg.org mailing list or IRC #ffmpeg on irc.freenode.net.
Include the log file "config.log" produced by configure as this will help
solving the problem.
configure: error: Submodule lib/ffmpeg failed to configure
This will be needed for 13.0 Gotham.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ARC-specific Makefile has been ignoring DESTDIR when doing target "install".
This has been causing build failure for native binutils, since it was trying
to install into the host's "/usr". This commit adds a patch that teaches
Makefile to honor DESTDIR. This patch should be removed after ARC Binutils
will be bumped to next release.
This fixes:
http://autobuild.buildroot.net/results/68ee094509db3e8fbedf9bab5745ff68cdfe0a84/
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
User "default" with no password has been around for long time, but not
used within buildroot. Since we now have BR2_ROOTFS_USERS_TABLES it is
no longer needed.
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Create an avahi specific user/group and use it instead of the global
'default' one, so it can be removed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches are now upstream.
Enable epoll support since any modern kernel/toolchain supports it.
Interworking requires Hotspot functionality which we didn't enable
before so introduce a new option for them.
While at it group and sort the options in a more lean and friendly way.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We support a busybox-menuconfig target so that the BusyBox
configuration can be adjusted as needed. However, depending
on what other packages are enabled, re-installing BusyBox
symlinks that duplicate "real" apps after the configuration
change can result in bad behaviors:
* At best, the BusyBox applet will be used after the
install, versus the desired "real" app.
* At worst, the built rootfs can become unbootable.
The BusyBox install.sh has some capability to avoid this issue
by means of a --noclobber option. By default, this option is
disabled. When enabled, the install.sh will not overwrite a
target file with a symlink or hardlink, be it an actual file
or a previously installed BusyBox link.
The install.sh's argument processing is somewhat broken, so this
patch simply changes the default value of the noclobber option
to on, rather than add --noclobber to the install.sh invocation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The de facto standard terminology in the manual appears to be "package
metadata information"; fix a couple of inconsistent references to package
"meta-information" and "meta information".
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalisation pattern is "GitHub"; fix manual and makefile
commentary.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#7166
hostapd crashes with segfault when using RT5370. This is because the driver
reports Beacon RX prior to hostapd having completed the AP mode setup.
This upstream commit fixes it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop --disable-tls since it's not needed.
Add --disable-rpath to avoid unnecessary pollution.
e4defrag now needs an (e)glibc or musl toolchain because of
sync_file_range()
See e2fsprogs commit 58229aaf85d435469e901c974f31ead6d9124166
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Closes#7160
Since f46f81de13 (Don't build host-xz needlessly), host-xz is no longer
unconditionally built when xz fs compression is requested, so don't
explicitly refer to it.
Instead, rely on our check-host-xzcat logic to ensure xz is available and
set the path to ensure our host variant gets picked up if not available on
the build machine.
While we're at it, get rid of the now unused XZ variable.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Relese notes for 0.9.9 release are avaialble here:
http://oprofile.sourceforge.net/release-notes/oprofile-0.9.9
This release adds support for ARC architecture.
Also introduces new "ocount" program for collection of raw event counts.
With release of 0.9.9 we may drop back-ported patches:
oprofile-002-no-query-modules.patch - liblegacy was removed since 2.4 kernels
are no longer supported
fcb818623b/
oprofile-003-oprofile-ppc32-build-fix.patch
fa889ea74b/
oprofile-004-fix-ppc64-specific-libpfm-usage.patch
79a183ed0d/
oprofile-005-fix-up-configure-to-handle-architectures-that-do-not.patch
ca6d916a6f/
But in 0.9.9 was introduced build breakage which was fixed later so adding
another back-ported patch
oprofile-002-Fix-compile-error-on-ppc-uClibc-platform-AT_BASE_PLA.patch
08241f1b2c/
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Simon Dawson <spdawson@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0178 (Malformed FSCTL_SRV_ENUMERATE_SNAPSHOTS response)
and CVE-2014-0239 (dns: Don't reply to replies).
Patches 0001 and 0002 are now part of the 4.1.x release branch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default uClibc version for xtensa is broken when LARGEFILE is disabled.
Add a patch to fix this.
Reported-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit c31d5bfdec (uclibc: arc: bump to arc-4.8-R3 release) uClibc
version f37101d94284 is no longer used for ARC. Remove a version specific
patch.
Cc: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The calao_qil_a9260 was not specifying an explicit kernel version, so
it ended up downloading the latest kernel version, and therefore fail
to apply the patches. This commit changes the defconfig to used a
fixed kernel version, so that the patches apply properly. It fixes a
Jenkins build failure that has been occuring since quite some time.
While we're at it, also lock down the version of the kernel headers,
as noticed by Peter Korsgaard.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Provide a fallback definition for KEY_MICMUTE (which was added in 3.1) and
fix the fallback definition for KEY_LIGHTS_TOGGLE (which was added in 3.10).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
procps is getting replaced by procps-ng, and there are
new versions available!
procps-ng is now an autotools package, so get rid of our
custom build/install rules.
Remove most patches, except for one that still half-applies,
so update and rename it.
procps is dead, long live procps-ng!
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is possible to build weston without libxkbcommon, for example
if using an input method that is not an hardware keyboard (e.g. a
virtual keyboard, or none at all.)
Make it optional.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the recently -released 1.5.0.
Remove existing patches, they are no longer needed:
- weston-0000-compositor-rpi-fix-input-initialization.patch was a
back-port of an upstream fix, so no longer needed,
- weston-0003-dont-build-tests.patch no longer applies due to a
complete rewrite of Makefile.am, but it seems tests now build fine
even without EGL support: there is code in the Makefile.am to
explicitly handle that case
Add a new patch from upstream to avoid a use-after-free situation.
So, it's no longer needed to autoreconf.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
... and switch to using .tar.xz as that's all upstream is providing now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lotta fixes all over the tree.
Still no new release... :-/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 990a46fdec (glibc: move version handling to Config.in) we use
Config.in version strings. Remove glibc.mk duplicate.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
New scan tables, and updates to existing ones.
Update upstream URL at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few adjustments here and there, plus re-definition
of the Crimea timezone.
New definition for the moment the Big-Bang occured, too. :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We already compile the zoneinfo once for the host, so there is
no need to recompile it for the target, we can just re-use the
host files.
This has no impact on tz (the uClibc counterpart of tzdata), since
it already made use of the host files anyway.
This means we no longer need to extract the target variant of
tzdata, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The correct capitalised form appears to be "BusyBox" rather than "Busybox";
fix all references to the latter form. (Most such references occur in the
manual and in commentary in package makefiles.)
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: drop redundant ipv6 handling, whitespace issues]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our patch is still valid, but it now builds fine with // builds
(tested many times with up to 128 // jobs, without failure.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This installs firmware files for the FullMAC series of Broadcom
WiFi devices.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump brings in a new version of the iwlwifi firmware.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi-3.12.y branch has now been merged with the 3.12.20 upstream,
and contains some fixes for FIQ, v4l2, i2c, USB, and 1-wire GPIOs.
Bump kernel headers used for the toolchain at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Yet another bump for the Raspberry Pi firmware:
- HDMI: EDID override; HDCP fix; add command to control power to HDMI phy;
fixes to mode selection
- GPU: enable use of HW cursor; fix for GLES FFT compliance; fix scaling;
remove arbitrary restrictions on output sizes
- video-decode: better handle corrupted h264 streams, better allocate memory
- misc: choose composite video when HDMI is not plugged
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a trick taken from gentoo enable parallel build when building for
the target to reduce the build time for my test case from about 54s to
32s on a dual-core laptop.
[Peter: add comment explaining why]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is usually used to adjust compiler flags (like: -Ox, -g,
etc).
So, it makes sense for Buildroot to globally drive this CMake flags in
the cmake-package infrastructure.
However, if a package prefer overriding this default setting, it still
can via the <PKG>_CONF_OPT variable.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is used to enable tests. It may not disable the test
programs from being built, but it controls the test execution.
Since we don't care about building the tests (and usually disable them
when possible), make sure Buildroot won't try to run them.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch updates the generated toolchainfile.cmake to use ccache.
When toolchainfile.cmake is used inside Buildroot, using ccache during
the build is driven by a CMake knob: USE_CCACHE, automatically set by
the cmake-package infrastructure and reflecting the BR2_CCACHE value.
Since this toolchainefile.cmake file can be used outside Buildroot, and
this file also set a couple of things (among these: the sysroot cflag,
some pkg-config environment variables), it is important to set the
compiler variables as well to keep the consistency of the
cross-compilation configuration.
So, when it is used outside Buildroot, using ccache for the build is
driven by the ccache program availability.
Note that using ccache for the build is achieved by setting the *_ARG1
CMake variables to let CMake use ccache without failing in detecting
the compiler.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces a toolchainfile.cmake.in template which is filled
by Buildroot.
Using a toolchainfile.cmake.in template file allows to avoid overloading
quoting and/or escaping and it becomes much more similar to the
resulting file.
This patch also cleans up the quoting style.
[Peter: drop stdin redirect as suggested by Thomas]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Gustavo, this patch bumps mpg123 to 1.20.0, and
therefore superseds the patch initially provided by Sven Neumann. In
1.20.0, there is a new CPU type arm_fpu, which will compile code for
both VFP and NEON, and choose at runtime which one to use.
Similarly for AArch64, the option --with-cpu=aarch64 will compile both
the NEON and generic decoders, and select at runtime which one to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add glibc 2.19-svnr25243 and a choice menu to select between different
eglibc versions.
Blacklist it for PowerPC SPE since it doesn't even build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These are already in toolchain/toolchain-buildroot/Config.in and since
package/glibc/Config.in is filtered by BR2_TOOLCHAIN_USES_GLIBC there's
no need to duplicate this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The assumption that musl libc does not support microblaze
little endian mode is wrong. See
http://git.musl-libc.org/cgit/musl/tree/configure line
number 447-448.
Tested with qemu. Just revert previous commit as suggested by
Thomas Petazzoni.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If bsdtar is installed, fix script error for tar version detection.
bsdtar does not provide all expected command line (long) options
like "--hard-dereference". To ensure compatibility, mark version
of tar as 'invalid' and trigger build of 'host-tar'.
[Peter; slightly reworded commit text]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Musl C library only supports Microblaze BE, not Microblaze LE, so
this commit adjusts the dependencies of the toolchain-buildroot
package to not allow the selection of Musl on Microblaze LE.
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by William Welch <bvwelch@gmail.com>, the Musl external
toolchain provided by the musl-cross project is only Microblaze
big-endian. In fact, Musl seems to only support the big endian variant
of the Microblaze architecture, with the microblaze-* tuple.
This commit makes sure the Musl pre-built external toolchain provided
by musl-cross can only be selected for a big-endian Microblaze
configuration.
Reported-by: William Welch <bvwelch@gmail.com>
Cc: William Welch <bvwelch@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reformat help text to fit in menuconfig, slightly tweak wording, strip
trailing spaces and clarify that wpa_supplicant is only a runtime
dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- add new configuration option '--enable-wispr' (disabled by default)
- move gnutls dependency to "wispr" config option
[Peter: drop gnutls ref for wchar, tweak help text, simplify .mk]
Signed-off-by: Heiko Abraham <abrahamh@web.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes misinstallation of xfont_font-bh-ttf-1.0.3/42-luxi-mono.conf to
'target@baseconfigdir@/conf.avail/42-luxi-mono.conf'
instead of proper place in the target directory (because of buggy
fontconfig.pc file).
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As discussed on irc, there is a missing part in the BR2_GLOBAL_PATCH_DIR
example compared to the ASCII figure under customize-packages section.
Signed-off-by: Sebastien Roy <sebastien.roy@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default the 'make install' step for qt5base will strip all the binaries
and libraries when they are installed to staging. This hinders debugging
as the libraries in staging dir have been stripped and is unnecessary
as buildroot will strip all files on the target
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
thrift uses the __sync_fetch_and_add() atomic primitive that is not available
for ARC.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ever since u-boot introduced the generic spl support in u-boot 2012.10, the
default spl output file has been spl/u-boot-spl.bin and not u-boot-spl.bin,
so use that as a more sane default value.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Support for ARC CPUs was added in libffi after 3.0.13 vesion was cut and up
until now no new release has been done. So to enale libffi on ARC we need this
set of patches.
These are corrsponding commits in libffi:
* b082e15091961373c03d10ed0251f619ebb6ed76 - Add ARC support
* 0f8690a84c874ec09a090c8c6adfb93c594acac6 - Rebuild for ARC additions
* d918d47809c174d62283306b282749f8db93661f - arc: Fix build error
The first patch was modified a bit (cut changelog part) to accomodate
changes not related to ARC between 3.0.14 and changes in question.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Signed-off-by: Misca Jonker <mjonker@synopsys.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using the tar filesystem method, the build output shows at the end:
echo " tar -c""f <br>/output/images/rootfs.tar -C <br>/output/target ." >>
<br>/output/build/_fakeroot.fs
The inner set of quotes can be easily removed by properly stripping the tar
options (coming from the buildroot configuration).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In pkg-generic.mk, an entry would be added to each of the permissions,
devices and users tables, even if FOO_PERMISSIONS/DEVICES/USERS is empty. In
that last case, the entry would contain only the separator, which is
substituted to '\n' in fs/common.mk.
For configurations with many packages, this would render the build output a
bit odd, containing many \n instances (even though the end result in the
target would of course be the same).
This patch cleans up the build output by only adding to these tables when
the package actually specified contents for them.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Acked-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Arnout.
We don't provide fakeroot for the target, and using a powerpcp4le machine as
the build host is quite unlikely - So drop the patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current SysV startup script create a directory which is necessary
for dropbear to correctly work.
This creation is not done with systemd.
Instead of both init creating the directory, we add the creation of this
directory to the INSTALL_TARGET_CMDS to make sure it's present.
[Peter: use make syntax for TARGET_DIR as pointed out by Thomas]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/0a3/0a392087878f80a70435981856455a30152b684d/
When building static, we need to tell exim that it needs to link
statically (obviously), and that it should link against pthreads.
Yet, exim is still not happy with that, as it still wants to build
something (a version-related program) at install time, so we need
to replicate the ld flags at install time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
People reading the Buildroot manual online cannot immediately know what its
license is (unlike reading it from within the source tree). To avoid any
discussion, explicitize this in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package provides a webserver and, eventually, a library: this is
what Centos, among other distros, is doing.
[Peter: correct install -D invocation]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This enables powerpc64 and powerpc64le. Currently, le needs at least
glibc 2.19 and gcc 4.9.0. For gdb, 7.7.1 works (added in an earlier
patch).
[Peter: also disallow gcc 4.8 for ppc64le]
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To prep for powerpc64le, we also disable gdb prior to 7.7.1 on
powerpc64le.
The default gdb on powerpc64le is set to 7.7.
Signed-off-by: Cody P Schafer <cody@linux.vnet.ibm.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mongoose has changed quite drastically in the last months.
Here is a list of changes which had to be applied:
- Bump version from 3.7 to 5.3
- use tarball download via github helper iso git clone
- need largefile support
- compilation takes place into "examples"
- weberver source is now "server.c"
- adapt to new command line options
- SSL support now controlled via NS_ENABLE_SSL
[Peter: extend commit text, use CFLAGS_EXTRA, only build server]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Cc: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using this minimal defconfig
BR2_TOOLCHAIN_EXTERNAL=y
BR2_PACKAGE_PYTHON=y
BR2_PACKAGE_BERKELEYDB=y
the current code does not prevent the build of
output/build/python-2.7.6/Modules/_bsddb.o
because the module is really called _bsddb,
see python-2.7.6/Modules/_bsddb.c, line 9604.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package does not install any binary files, only headers.
[Peter: drop invalid license file]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for powerpc64le-linux-gnu. This includes
needed patches to fakeroot and gmp.
gmp patch is from upstream HG tree.
fakeroot patch is from Ubuntu written by Adam Conrad.
Signed-off-by: Jeff Bailey <jeffbailey@google.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add missing license info and file for package 'hwdata'
[Peter: GPLv2 should be '+' variant, clarify that it is dual licensed]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual contains details about how users can contribute to
buildroot. The website also had such a list, but with much less detail and
not containing all topics.
In order to avoid duplicating this information, simply list the different
topics without detail on the website, and add a link to the relevent
chapter of the manual.
[Peter: slightly reword]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Every requests on kernel.org gets redirected to https.
So just set our kernel.org settings straight to begin with.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When installing a localtime, check it is a valid timezone.
[Peter: extend error message to make it clear to the user what to change]
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Fatih Aşıcı on the mailing list it sometimes fails with
the host openssl depending on versions when development files are
installed.
And as suggested by Thomas Petazzoni it's really not required for
anything so just disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update 900-musl-support.patch with upstreamed chunks.
Now upstreamed hence dropped:
840-PR57717.patch (in another way).
842-gcc-4.8.2-Fix-PR-target-58854.patch
843-gcc-4.8.2-Fix-PR-target-58595.patch
850-xtensa-libgcc-linker-script.patch
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit cd32da8f79
("toolchain-external: add Linaro ARM big endian toolchain") a mistake
was made, probably due to a rebase conflict that was incorrectly solved:
the call to the post install staging hook that creates the necessary
symbolic links for a root filesystem based on Linaro 2014.02 to work
was removed.
This commit reinstates this call, which should fix the problem
observed by Maxime Hadjinlian while using Linaro 2014.02.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Python 3 is selected in Buildroot, the host/usr/bin/python
symlink of the host Python interpreter points to python3. Packages
that need to use the host Python 2 interpreter have to use python2.
In commit 40218a1652 ("nodejs: force
python interpreter"), Samuel made some changes to the nodejs package
to use python2. One part of the changes is to sed a .gyp file to
replace the string 'python' by the path to python2. However, this
operation is done *after* calling the configure script, so it has in
fact no effect. Putting this sed before calling the configure script
fixes the problem.
However, there is a better solution: the nodejs build system has a
mechanism of variables, and it already defines a python variable
according to the environment variable PYTHON being passed. So this
patch instead adds a new patch to nodejs to use this python variable.
Fixes:
http://autobuild.buildroot.org/results/aff/affd7300895ec400de50a33d51b4e94e15d63341/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, it is possible that more than one provider of a virtual package
is selected in the menuconfig.
This leads to autobuild failures, and we do not protect the user from
making a mistake in the configuration. The failure is then hard to
troubleshoot in any case.
We can't use kconfig constructs to prevent this, since kconfig does not
tell how many options did a select on another option.
This change introduces a new variable a provider *must* define to include
all the virtual packages it is an implementation of. Then, when evaluating
the package's rules, we check that the provider is indeed the declared one
for each virtual package it claims to be an implementation of.
This works by taking advantage that when more than one provider is
selected, only one of them will 'win' in setting the _PROVIDES_FOO
option. Thus any provider just has to check it is indeed the declared
provider. If not, it means that one or more other provider is selected.
This gives the opportunity to the user to change its configuration, and
we can match the error message in the autobuilders to skip those failures
(we can skip them instead of reporting them, since they are obviously
configuration errors that should not happen in the first place.)
[Note: kudos to Arnout for suggesting this actual implementation. :-)]
Fixes:
http://autobuild.buildroot.org/results/285/2851069d6964aa46d26b4aabe7d84e8c0c6c72cehttp://autobuild.buildroot.net/results/9b7/9b7870354d70e27e42d3d9c1f131ab54706bf20e
[...]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quoting Thomas on IRC:
> sstrip is a piece of crap that we should exterminate
> from the surface of the planet
sstrip is now unmaintained, has a long history of generating butchered
binaries in some cases, and does not gain that much space in the end.
We'd like to obliviate sstrip from the strip options, anihilate the
sstrip package, scorch any reference in fire, and cleanse our tree
free of any remnants...
But first, let's just deprecate it for now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following the issues reported by Jerry <g4@novadsp.com>, it appears
that there are a number of U-Boot configuration variables we are not
checking properly, leaving users with weird behavior at build time.
This commit extends the existing U-Boot checks to verify that when a
custom version, custom tarball, or custom Git or Mercurial
repositories are selected, the appropriate fields are not empty in the
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ipsec-tools currently fails to build for Blackfin due to GLOB_TILDE
not being supported in Blackfin external toolchains. However, after
fixing this problem (which will be fixed in later versions of the
Blackfin external toolchains) allows to discover that ipsec-tools uses
fork() anyway.
Therefore, this patch simply marks ipsec-tools as not available on
non-MMU systems.
Consequently, it fixes:
http://autobuild.buildroot.org/results/fc4/fc4ef4101a20e64eb52da56557d6996dd73b3d86/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.1.0 is dated 2011-12-04.
3.1.1 is from 2014-02-20 and has quite a few enhancements.
Signed-off-by: oli vogt <oli.vogt.pub01@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fixes
http://autobuild.buildroot.net/results/27a/27a674c6a19a729fae5cc33de0360b2a061930c1/
This patch indeed fixes several problems based on the autobuilder-defconfig used.
1) Add missing dependencies when opengl is detected by webkit to satisfy autobuilder:
checking which GPU acceleration backend to use... opengl
checking for XCOMPOSITE... yes
checking for XDAMAGE... no
configure: error: Package requirements (xdamage) were not met:
2) ... but opengl should not have been detected with the used defconfig:
$ grep MESA .config
BR2_PACKAGE_MESA3D=y
which will lead to a link error although webkit configure found all dependencies:
/home/br2/output/host/opt/ext-toolchain/bin/../lib/gcc/mips-linux-gnu/4.7.3/../../../../mips-linux-gnu/bin/ld: cannot find -lGL
3) same is valid for glx, having GL/glx.h means nothing
4) add some configure options for gles/egl as well, just to make sure ;)
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, we were keeping gdb version 6.6a specially for
Blackfin. However, it turns out that support for Blackfin was merged
in gdb 7.4 (cross-gdb and gdbserver, not native gdb on the
target). Therefore, we can simply remove the support for version 6.6a
and use 7.5 as the default.
Both 7.4 and 7.5 were built tested, including cross-gdb and gdbserver.
The original reason to switch to 7.x is that 6.6a doesn't build for
Blackfin FLAT, and while it builds for Blackfin FDPIC, it only builds
libiberty.a and does not actually build a cross debugger.
Fixes:
http://autobuild.buildroot.org/results/b47/b47f85553336b7f63ee4ecdf8598374ce4a225a3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build of host-gdb 7.4 fails due to some texinfo issue. To avoid
that, use the same trick as is used for the target variant of gdb:
tell gdb that makeinfo is missing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The file external.mk was included before fs/common.mk, so it was impossible
to add rootfs targets using the BR2_EXTERNAL mechanism.
This change moves the inclusion of fs/common.mk before external.mk to allow
this.
Signed-off-by: Philippe Reynes <tremyfr@yahoo.fr>
[ThomasDS: rebased, update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Makefile's target "install-magickincarchHEADERS" and "magick-install-data-local"
install both the same file (magick-baseconfig.h) in the same time...
The problem can be reproduced with:
mkdir /tmp/bar
/usr/bin/install -c -m 644 foo /tmp/bar &
/usr/bin/install -c -m 644 foo /tmp/bar/foo
/usr/bin/install: cannot create regular file '/tmp/bar/foo' : File exists
So, remove one of them.
Fixes:
http://autobuild.buildroot.net/results/d34/d34077ce582866c50bbd90de10bbe593e39463f1/build-end.log
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There will soon be new options to the graph-depends script, which we
can only sanely pass via environment variables.
Currently, we use such an environment variable to pass the maximum depth
of the dependency graph; the name of that variable is explicit that it
contains just the depth.
However, there has been so far no release of Buildroot which would make
use of that variable, so no user should have come to rely on it.
Rename that variable so it is less specific, and more generic, so it can
be used to pass more options to graph-depends.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We need to tell the duma Makefile what OS we're gonna run on, or it
uses default values.
It turns out the default values are the same as for OS=linux (and so
this change should be a no-op), but it's just better to force it, and
it avoids a warning during the build.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though pulseaudio has some HAVE_FORK compile-time conditionals to
avoid using fork(), those parts of pulseaudio are not using it. Since
using pulseaudio on !MMU platforms is fairly unlikely, we simply
disable it when no MMU is available, and propagate this dependency to
the appropriate locations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fluxbox uses the fork() system call, not available on noMMU
platforms. It's also fairly unlikely to have to use a full-blown
X.org window manager on such platforms.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
php-imagick selects imagemagick, and imagemagick 'depends on
BR2_USE_MMU', but this dependency was not propagated to
php-imagick. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zyre selects filemq, and filemq 'depends on BR2_USE_MMU', but this
dependency was not propagated to zyre. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sane-backends currently doesn't build with the ADI external
toolchains, due to an internal compiler failure. However, using the
internal toolchain backend for Blackfin goes past this internal
compiler failure, but raises the problem that sane-backends uses
fork(). Sane-backends has a --enable-pthreads option that allows to
use threads instead of forking in some parts of sane, but there are
still some other areas of sane-backends that continue to use fork().
Since the probability of using sane-backends on a noMMU system is
fairly small, we'll just disable this package for now on such
architectures, until someone cares enough to investigate deeper.
Fixes:
http://autobuild.buildroot.org/results/136/136100c3a2d843b7915fdd83d23d8b301fee577e/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
elfutils depends on !BR2_avr32, but this dependency was not properly
propagated to the comment about toolchain options. This commit fixes
that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but cleaner.
Remove the double --disable-manuals and move the debug handling together
with the other optional configure flags.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Qt5Quick1 module doesn't need OpenGL libs and declarative module.
This module can be used to port qt4 qml apps to qt5. Patch has been tested
with linuxfb output plugin.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Reviewed-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The --with-fontdir switch has been substituted by the --with-fontrootdir
switch a few versions ago. The use of the old configuration switch was
causing error messages like the following:
_FontTransOpen: Unable to Parse address ${prefix}/share/fonts/X11/*/
[dix] Could not init font path element ${prefix}/share/fonts/X11/*/, removing from list!
Signed-off-by: Filippo Sironi <filippo.sironi@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this patch fixes :
luajit: error while loading shared libraries: libluajit-5.1.so.2: cannot open shared object file: No such file or directory
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two fixes for xtensa are still applicable to gdb-7.5.1, which is now the
default; copy them from 7.4.1. This fixes native gdb build for xtensa.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jack2 uses Waf 1.6.11. The waf configure program combines a part of
python script with a compiled blob. According to Waf documentation,
waf currently supports python interpreter from version 2.3 to 3.1.
However, Buildroot provides python-3.4. So, let's uses host python2
interpreter for building jack2.
This patch also cleanup whitespace, replacing wrongly used spaces with
tabs.
Fixed:
http://autobuild.buildroot.net/results/913/913bb1836076be9f201bf6641c7614708d6916bc/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autobuilders are not able to build glibc on AArch64 since we moved
to the internal toolchain backend as the default for AArch64. The
reason is that the cross-ld segfaults while linking of the glibc
utilities. Unfortunately, the issue has so far been impossible to
reproduce outside of the autobuilder CI loop itself: even on the same
machine, in the same chroot, the issue does not appear.
Today, Will Newton helped me analyze a bit further the problem. In the
logs of the build machine, we have found that the following segfault
notification matched the dates of the autobuilder failures:
/var/log/syslog:May 15 10:39:20 sd-56966 kernel: [767023.832598] ld[6846]: segfault at 1b2c002 ip 00000000004caf80 sp 00007fffaa308df8 error 4 in ld[400000+1b9000]
/var/log/syslog.2.gz:May 13 07:58:24 sd-56966 kernel: [585094.434264] ld[17761]: segfault at 154b002 ip 00000000004caf80 sp 00007fff0d400168 error 4 in ld[400000+1b9000]
/var/log/syslog.3.gz:May 12 20:24:08 sd-56966 kernel: [543558.227915] ld[14841]: segfault at 2706002 ip 00000000004caf80 sp 00007fffc08d41c8 error 4 in ld[400000+1b9000]
/var/log/syslog.4.gz:May 11 19:51:59 sd-56966 kernel: [455484.523033] ld[50162]: segfault at 1f00002 ip 00000000004caf80 sp 00007fff14a02328 error 4 in ld[400000+1b9000]
/var/log/syslog.4.gz:May 12 05:13:37 sd-56966 kernel: [489085.120089] ld[32067]: segfault at 2430002 ip 00000000004caf80 sp 00007fffc448db48 error 4 in ld[400000+1b9000]
/var/log/syslog.6.gz:May 9 15:20:38 sd-56966 kernel: [266948.197141] ld[13483]: segfault at ff0002 ip 00000000004caf80 sp 00007fff7e4fe948 error 4 in ld[400000+1b9000]
/var/log/syslog.7.gz:May 8 16:45:08 sd-56966 kernel: [185853.688607] ld[1757]: segfault at 20b1002 ip 00000000004caf80 sp 00007fffd07d5ae8 error 4 in ld[400000+1b9000]
See
http://autobuild.buildroot.org/?reason=glibc-2.18-svnr23787&arch=aarch64
for the autobuilder results.
So, the segfault always happens while accessing an address 2 bytes
after the beginning of a page: it looks like a buffer overflow, which
gets triggered because the object is placed towards the end of the
previous page, and crosses over the next, unallocated page.
Moreover, we looked at the 0x4caf80 address in an AArch64 cross-ld
built by Buildroot, and it turns out that it is part of the
iterative_hash() function. This nicely correlates with the patch that
Will Newton had pointed in
http://lists.busybox.net/pipermail/buildroot/2014-May/095881.html as a
fix for invalid memory accesses reported by Valgrind in the AArch64
cross-ld, specifically around the same area of 'ld'.
Therefore, even though we have not been able to reproduce the issue
outside of the autobuilders, and cannot confirm that the patch is
fixing the issue, I propose to integrate this binutils patch into
Buildroot. It is anyway an upstream binutils patch, which fixes a real
problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 6c5c08b854,
openpowerlink package is rebuilt at every make call because
.stamp_downloaded is missing in the build directory.[D
The culprit is OPENPOWERLINK_EXTRACT_CMDS that remove and
replace the build directory.
unzip extract a directory "openPOWERLINK-V1.08.4" and
Buildroot expect a directory "openpowerlink-V1.08.4"
It is easier to use git repository instead of zip archive and
avoids rename the directory openPOWERLINK to openpowerlink.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since libatomic_ops does not implement real atomic operations for
ARMv4 and ARMv5, libunwind must define AO_REQUIRE_CAS do indicate it
requires compare-and-swap operations, even if not available as real
atomic operations for the current architecture. In this case,
libatomic_ops will rely on emulated atomic operations, which also
require linking against libatomic_ops, which was until now not done by
libunwind.
This fixes the mysterious ltrace build issue:
http://autobuild.buildroot.org/results/e1b/e1b330abfa2d80f3f30bc3359428ea429c690eb8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes the following build error often seen during linux kernel
linking step with relaxation enabled:
dangerous relocation: call8: misaligned call target: (.text.unlikely+0x63)
Backported from: a35d5e823fdfe8a6e7e05ca8e3fb8bb5697335b1
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Buildroot manual currently does not contain any mention of the
<pkg>_INSTALL_IMAGES_CMDS which could potentially be of interest when
developing a new 'generic-package'.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
CC: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SYSSTAT_MAKE_OPT is a string used to pass options to make, '+=' operator
doesn't have any special meaning inside it, so CFLAGS+=... is passed to
shell, overwriting previous CFLAGS value.
Replace CFLAGS+="..." with CFLAGS="$(TARGET_CFLAGS) ...".
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
EBTABLES_K64U32 is a string passed directly to the configure script,
'+=' operator doesn't have any special meaningi inside it, so
CFLAGS+=-DKERNEL_64_USERSPACE_32 is passed to shell, overwriting previous
CFLAGS value.
Replace CFLAGS+="-DKERNEL_64_USERSPACE_32" with -DKERNEL_64_USERSPACE_32
and pass CFLAGS="$(TARGET_CFLAGS) $(EBTABLES_K64U32)".
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LIBCGROUP_CONF_ENV is a string used to pass environment variables to the
confgiure script, '+=' operator doesn't have any special meaning inside
it, so CFLAGS+=... is passed to shell, overwriting previous CFLAGS
value. Replace CFLAGS+="..." with CFLAGS="$(TARGET_CFLAGS) ...".
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target-finalize target does a large number of actions (removing
unnecessary files, stripping objects, etc.) but does not have a header. This
makes it seem that all these actions are done as part of the last action
before target-finalize, for example:
>>> makedevs undefined Installing to target
To make a clear distinction, add a message to the beginning of
target-finalize:
>>> Finalizing target directory
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-protobuf package can only build on certain architectures. For
example, host-protobuf does not build on PowerPC platforms, causing
build failures on the autobuilders. Since we don't really care about
build platforms other than x86 and x86-64, this commit restricts the
build of host-protobuf to these architectures only, even though if
technically it could build on ARM and MIPS.
Fixes:
http://autobuild.buildroot.org/results/9b9/9b9b20b0e4694b11425cdc2382650cdc2774e400/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot v2014.04 introduced significant changes in its build infrastrcture.
Among things related to buildroot are:
1. Special new target ("tools-only") was added for building host tools alone
2. Tools cross-building for target is no longer possible with substitution of
HOSTxx with TARGETxx because host binaries won't be built. Instead we just set
CROSS_COMPILE and CROSS_BUILD_TOOLS variables.
3. Most of make targets now require U-Boot to be configured before building.
So for building generic "fw_printenv" we now need to make "env" target config-
independent.
4. HOSTCPPFLAGS are not used anywhere, so dropping
"uboot-tools-02-hostcflags-override-fix.patch"
Also due to lincese boilerplate change in sources
"uboot-tools-01-drop-configh-from-tools.patch" required subtle changes.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "make freetype-patch" fails because does not found autogen.sh,
because autogen.sh available only for the configure stage.
To fix this add host-automake as a prerequisite to freetype-patch.
This change also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently the check for EABI/EABIhf toolchains looks for the
Tag_ABI_VFP_args attribute in the crt1.o file which gcc adds in an
EABIhf toolchain.
In uClibc, however, crt1.o is not compiled from c but assembly, so the
Tag_ABI_VFP_args attribute is not added in the object file. This causes
the EABIhf check in the external toolchain logic to fail for
uClibc-based toolchains.
Fix by compiling a dummy .c file and trying to link the object against the
C library. Since it is impossible to mix EABI and EABIhf code, a mismatch
between the buildroot and toolchain ABI settings will be detected during
this link step.
Fixes bug #6842: https://bugs.busybox.net/show_bug.cgi?id=6842
[Peter: fix final 'fi']
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
[ThomasDS: do full link iso readelf test, update commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow stereo modes to be selected for output; enable NTSC output.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The alsa utils packages require a kernel with IPC support to run. The
kernel config for the x86 and x86_64 qemu build includes sound support
using the hda driver but without the IPC support the alsa utils won't work.
This patch adds IPC support to the x86 and x86_64 kernel to allow alsa
utils to run and brings the kernel config inline with kernel configs for
other qemu boards.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the package to use patches that have been applied upstream and
update their status comment accordingly.
f_fsid checks have been fixed via upstream patch that allows the cache
to work properly on the result.
Builtin heimdal tools can be worked around via the --bundled-libraries
option to disable those components (even if they are not libraries it
can be done that way).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During the CMake bootstrap phase, the {C,LD}FLAGS set in the bootstrap
environment are not forwarded/converted as CMake flags.
The CMake build contains a bootstrap phase building a minimal CMake
program using a standard Makfile, then reconfigures itself with this
minimal program.
On system with no ncurses installed, and because the prefix option
points to $(HOST_DIR)/usr, if host-cmake was built after host-ncurses,
then ncurses libraries and headers are correctly found (in the host
tree) during the second configuration (because of the prefix). However,
it fails at building ccmake (the curses interface) because the
CMAKE_C_FLAGS, CMAKE_CXX_FLAGS and CMAKE_EXE_LINKER_FLAGS do not
point to the host tree.
Because these flags are needed when running the bootstrap script,
this patch makes sure the same flags are set when running the second
configuration.
Reported-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The make_hash host tool, should be built during a PRE_BUILD_HOOKS and
not a POST_CONFIGURE_HOOKS.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add PRE_*_HOOKS to all the different steps through which a package may go.
This will help avoid using POST_*_HOOKS to do tasks that should be done
in the PRE_*_HOOKS of the next step.
Otherwise, when the user would do a make foo-re<step>, this would not do
what was really intented, the POST_*_HOOK of the preceding step not
being executed.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[ThomasDS: rebase, add images hooks to manual]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the new XBMC, on RaspberryPi, libcec throws an asserts in RPi
userland's code which forbid XBMC Gotham to start.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The toolchain currently doesn't build for nommu ARM and is in need of
serious work.
Problem is there are no emulation targets and real ARM(7TDMI/720T/740T)
hardware that's capable of running linux (enough memory, having a
memory controller...) is VERY rare and uses very old versions to
make it usable.
The ARM nommu focus should go into Cortex M series processors that are
obtainable at reasonable cost on modern hardware that has external
memory controllers.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
MIPS nommu never took off, the only MIPS processors without MMU are
microcontrollers and the only uclinux effort for them has non-upstream
patches against very very old versions.
See http://www.xiptech.com/uclinuxformips.htm
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Forcibly disable mysql support when we don't want it since ulogd's
configure script can pick up the host mysql_config thus leading to a
build failure.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Features:
Supports parsing a request encoded by GET/POST method
Supports parsing multipart/form-data encoding.(in-memory and direct disk)
Supports COOKIE handling.
Supports Session management.
Supports FastCGI
[Peter: drop invalid patch, add patches for make install + configure paths]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On the systems with old dblatex (for example 3.0) the build step will
fail, because dblatex doesn't support '-q' parameter. This patch
overrides dblatex check.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise we're getting musl for everything except those who have a
default (mips64*).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds ten toolchains based on the musl C library that are
publicly available from the musl-cross project.
[Peter: fix ppc prefix, only for classic ABI]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A build issue affects libsanitizer on musl toolchains, even with
previous versions of gcc such as 4.8.x, so we disable building
libsanitizer when working with musl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The musl C library does not yet implemented the getpwent_r() function,
needed by the Busybox password code when CONFIG_USE_BB_PWD_GRP is
disabled. So we enable it when the musl C library is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For the moment, the musl support is not in mainline gcc, so it
requires a few patches. We have integrated those patches only for gcc
4.7 and gcc 4.8 at the moment, so only allow those gcc versions when
the musl library is selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tarball download from github is preferred, because:
- download size is smaller
- git clone may be blocked in some corporate environments
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kernel commit cf4cca10 (perf tools: Move libelf check config into config/Makefile)
removes the NO_LIBELF check from the top-level Makefile
for newer kernels, if config/Makefile exists, we can assume that NO_LIBELF is
also there
Signed-off-by: Peter Meerwald <pmeerw@pmeerw.net>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit slightly improves the external toolchain backend, and the
gdb build logic to create a file named
$(STAGING_DIR)/usr/share/buildroot/gdbinit which can be used as a
gdbinit file using gdb -x option. This allows gdb to automatically use
the proper sysroot to find libraries.
The initial insight for this patch comes from the report of Oded
Hanson <OHanson@xsightsys.com>, who found an issue with the Eclipse
Buildroot plugin, which was setting a solib-path in gdb, but not a
sysroot. Setting a solib-path was enough to find shared libraries, but
not the dynamic linker. And since Eclipse doesn't allow to set the
sysroot in any other way than giving a gdbinit file, it makes sense to
have Buildroot generate a gdbinit file (which can be used in other
situations than Eclipse).
To achieve this, this commit introduces a gen_gdbinit_file helper in
toolchain/helpers.mk, and uses it for the internal toolchain and
external toolchain backends.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[ThomasDS: minor updates in commit message]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to commit f64a1b850f ("cups:
convert to autotargets"), cups was explicitely configured to
put its modifiable single-machine data under /var. After that
commit, the --localstatedir was not specified, so it remained at
it's default value, "PREFIX/var" - making cups use "/usr/var".
Using /var to store state files seems preferable to /usr/var,
as /usr might be read-only on some systems. This patch
re-introduces the --localstatedir specification to build cups
to use /var.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Armadillo is a C++ linear algebra library.
[Peter: needs largefile, sort Config.in alphabetically]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As for the tzdata package, install the missing files:
- zone.tab : {country-code,coordinates,timezone} tuples
- iso3166.tab: {country-code,country} tuples
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch also call autoreconf in order to use buildroot's libtool as
buildroot's libtool patch doesn't apply to the upstream ltmain.sh.
[Peter: clarified the need for AUTORECONF]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package provides BLAS and LAPACK libraries.
Though it is common to find implementation of these two libraries in
Fortran, this package provides a C-implementation for both, because:
- Fortran support has been deprecated in Buildroot since the 2013.11
release;
- most of the external toolchains do not provide a Fortran compiler.
Often BLAS build-systems build some test programs and run them to
generate some source files or adjust some build optimizations, naively
assuming they are building the library for the build-machine. This does
not play well when cross-compiling.
This implementation has this defect too, by building and running a tool
generating a header.
However, the build-system allows to pass an empty header.
So, we have to patch the CMake to build the generator (but never
install it) and correctly support building with and without this header
provided by the user.
Also, some CMake patches are needed to fix the build and install rules.
[Peter: needs largefile, fix _LICENSE_FILES, tweak patch desc]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The OpenCV highgui module links against QtGui and QtTest.
The latter is built by default but was never installed.
Thanks to the previous patch on Qt, this can be rectified.
So, update the OpenCV Config.in with the missing Qt module selection.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building Qt in a minimal configuration, a couple of Qt modules
(QtNetwork, QtSql, QtTest and QtXml) are built in addition to QtCore,
so they are installed in the sysroot but they are not copied into the
target tree.
Among these modules that could be built but optionally installed, only
QtTest had no option to allow being installed in the target fs.
Thus, programs linking against QtTest would successfully build, but
would miserably fail at runtime due to this missing dependency.
So far, the only package triggering this issue is OpenCV (the highgui
module built with Qt support).
A followup patch will add this missing dependency in OpenCV using this
new option.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- update version to 1.31
- correct license to GPLv2+
- change download url to official repository
- remove evtest-capture support (dropped since 1.31)
- change broken project URL to official repository
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The flite configure script detects the availability of alsa-lib. Add alsa-lib
to flite dependencies to make sure alsa-lib is always detected when
available.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At runtime, libao will load all plugins, even ones that will never be used.
Since libao will prefer ALSA over OSS by default anyway, it is pretty safe
to exclude the OSS plugin.
There is no configure option for disabling the OSS plugin, so we remove
the shared object in a post-install hook.
Also disable alsa oss emulation workaround as it no longer will be used with
alsa.
[Peter: explain why --disable-broken-oss is passed]
Signed-Off-By: Maarten ter Huurne <maarten@treewalker.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since syslinux can now install quite a number of files, install
them in a sub-directory of $(BINARIES_DIR) for clarity.
It also aligns it to rpi-firmware, grub2, gummiboot, that install
all of their files in a sub-dir of $(BINARIES_DIR), too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This new version has a very, very weird build system. There are different
images that syslinux can now build:
- the plain legacy-bios images we already supported previously
- two new EFI32 and EFI64 applications
To build one or the other, the Makefile accepts one or more of:
make (bios|efi32|efi64)
Specify all of them, and it builds all. Specify 'install', and it installs
all of them, as one may expect.
Still a regular behaviour, is to build only a subset (down to one):
make bios <-- builds just the legacy-bios images
make efi32 bios <-- builds just the legacy-bios and efi32 images
Where it gets weird is the install procedure. Can you guess how it's done?
Hint: the syslinux guys have invented the multiple-argument parsing in
pure Makefiles. To build then install only the bios images, one would do:
make bios
make bios install
Yep, that's it. make bios install. Two arguments, one action.
That makes for some funky workarounds in our install procedure...
'bios' is the only image we support so far, with efi to come in a future
patch.
Using MAKE1, as there are issues with highly-parallel builds.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
UPX is a free, portable, extendable, high-performance executable
packer for several executable formats.
This is needed for syslinux 6.x.
Note: upx is a host-only package. Although it supports quite a few
target architectures, the only use so far will be for use by syslinux,
which already has an x86-on-x86 requirement anyway. So we currently do
not care to have target-dependencies on host-upx.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[yann.morin.1998@free.fr: builds fine in parallel; fix build to
locate libucl; fix installation; don't add a menuconfig entry]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
UCL implements a number of compression algorithms that achieve an
excellent compression ratio while allowing *very* fast decompression.
Decompression requires no additional memory.
This is needed for UPX, which is needed for syslinux 6.x.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
[yann.morin.1998@free.fr: don't add a menuconfig entry, since it
currently is for internal use only]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The comments are not really part of the command we want to execute,
so move them out of the define-block. This also cleans up the output,
as they will no longer appear.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, we hard-code the path to the images we install, and
expect them to be from the core/ sub-dir.
Not all images we can install are located in core/. For example,
the efi boot images (to come later) are not located in core/.
Prepare the upcoming installation of extlinux by not expecting
images be in core/.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Lundquist <lists@zelow.no>
Cc: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Frank Hunleth <fhunleth@troodon-software.com>
Tested-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream has been playing evil-rebase on their tree, so they now
no longer have the changeset we are currently referencing.
They have now agreed to merge instead of rebasing:
https://github.com/raspberrypi/linux/issues/584
So, update the raspberrypi_defconfig to use a new changeset that
currently exists right _now_, in the hope it will not disapear in
the future (but we'll catch it pretty fast anyway, so we'll be able
to seriously bug up upstream in that case ;-) ).
Reported-by: Jeremy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: yann.morin.1998@free.fr
Cc: Jeremy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
zeromp's configure script correctly detects the fork availability, but
unconditionally build test_fork program whatever the fork() availability.
This patch fixes the build-system by disabling test_fork when fork is
not available (e.g. when !BR2_USE_MMU).
Fixes:
http://autobuild.buildroot.org/results/359/3599cc3b7bf2bb22a78961cd84d21cb03cbd7015/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: remove Makefile.in hunks]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[yann.morin.1998@free.fr: tested against the failed bfin config, as well as
a i686 target]
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This consists of two files:
- avahi-daemon.service:
It start/stop the daemon avahi, it's a copy of the S50avahi-daemon
script.
- avahi_tmpfiles.conf:
This one gets installed in /usr/lib/tmpfiles.d/ to be used by
systemd-tmpfiles which will create the correct directory structure
with the appropriate rights.
This is the equivalent of the S05avahi-setup.sh script.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since libwesockets in written in pure C, no C++, there is no reason to
disable it or make the configuration failed when the toolchain has no
C++ support.
Unfortunately, CMake defaults sets C and C++ as languages used by the
project. This makes the configuration failed if no C++ compiler is found.
This patch just make the CMake code of libwebsockets reflecting the real
status of the project with regard to the languages used.
Should fix:
http://autobuild.buildroot.org/results/fef/fef98ef289d44d13ec61025c50febba1e835b421/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual has this sentence for the dependency on a C library *and* a
toolchain feature:
foo needs an (e)glibc toolchain, or foo needs an (e)glibc toolchain
w/ C++ support
And then, just below, the comment text for C++ is just 'C++', not
'C++ support'.
Fix that, and add a bit of indentation too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For asciidoc, a string like '+these are some words+' will be displayed in
monospace font. Such sequences are identified by searching for a matching
pair of + signs in the same block.
The string 'C++' also contains such + signs. In most cases, this does not
pose a problem and no escaping is necessary. However, if 'C++' occurs twice
in the same block, the + signs will be matched to each other, and asciidoc
formats all text between them as monospaced text. In this case, escaping of
one of these 'C++' occurances is necessary to get the right formatting.
In one place of the manual, there is a sentence that causes such a problem:
"you only have to tell whether your toolchain supports C++ or not and
whether it has built-in RPC support. If your external toolchain uses
the 'uClibc' library, then you have to tell Buildroot if it supports
largefile, IPv6, RPC, wide-char, locale, program invocation, threads
and C++."
Commit 082dec8ce4 was based on a patch fixing
this problem in one place of the manual, but was incorrectly changed while
committing.
This patch reverts the incorrect changes in that commit, and solves the
problem correctly.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Asciidoc supports two syntaxes for section titles: two-line titles (title
plus underline consisting of a particular symbol), and one-line titles
(title prefixed with a specific number of = signs).
The two-line title underlines are:
Level 0 (top level): ======================
Level 1: ----------------------
Level 2: ~~~~~~~~~~~~~~~~~~~~~~
Level 3: ^^^^^^^^^^^^^^^^^^^^^^
Level 4 (bottom level): ++++++++++++++++++++++
and the one-line title prefixes:
= Document Title (level 0) =
== Section title (level 1) ==
=== Section title (level 2) ===
==== Section title (level 3) ====
===== Section title (level 4) =====
The buildroot manual is currenly using the two-line titles, but this has
multiple disadvantages:
- asciidoc also uses some of the underline symbols for other purposes (like
preformatted code, example blocks, ...), which makes it difficult to do
mass replacements, such as a planned follow-up patch that needs to move
all sections one level down.
- it is difficult to remember which level a given underline symbol (=-~^+)
corresponds to, while counting = signs is easy.
This patch changes all two-level titles to one-level titles in the manual.
The bulk of the change was done with the following Python script, except for
the level 1 titles (-----) as these underlines are also used for literal
code blocks.
This patch only changes the titles, no other changes. In
adding-packages-directory.txt, I did add missing newlines between some
titles and their content.
----------------------------------------------------------------------------
#!/usr/bin/env python
import sys
import mmap
import re
for input in sys.argv[1:]:
f = open(input, 'r+')
f.flush()
s = mmap.mmap(f.fileno(), 0)
# Level 0 (top level): ====================== =
# Level 1: ---------------------- ==
# Level 2: ~~~~~~~~~~~~~~~~~~~~~~ ===
# Level 3: ^^^^^^^^^^^^^^^^^^^^^^ ====
# Level 4 (bottom level): ++++++++++++++++++++++ =====
def replace_title(s, symbol, replacement):
pattern = re.compile(r'(.+\n)\%s{2,}\n' % symbol, re.MULTILINE)
return pattern.sub(r'%s \1' % replacement, s)
new = s
new = replace_title(new, '=', '=')
new = replace_title(new, '+', '=====')
new = replace_title(new, '^', '====')
new = replace_title(new, '~', '===')
#new = replace_title(new, '-', '==')
s.seek(0)
s.write(new)
s.resize(s.tell())
s.close()
f.close()
----------------------------------------------------------------------------
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix networking in Qemu using a small patch
- disable DTS, because linux.bin does not include any DTB the
default Qemu included DTB is used and this is okay and works fine
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to gcc 4.9.x for microblaze since it's a better target than
4.8.x, and also add a build patch that fixes (e)glibc build issues.
Hence disable 4.8.x for microblaze.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "target-purgelocales" target must be executed after all the other
targets and before the "target-finalize" target, so create a
TARGET_PURGE_LOCALES variable containing the commands of the target
"target-purgelocales" and add it at the beginning of the
"target-finalize" target.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit a5e92d92e7 converted uClibc to the
package infrastructure, but while doing so removed support for the
documented uclibc-update-config make target. This make target copies the
uclibc .config file back to the original (typically version-controlled)
configuration file.
As this was an unintentional removal, this patch re-adds the
uclibc-update-config target.
Reported-by: Dan Moulding <dan.moulding@rackwareinc.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Kernel headers versions 3.6.x and 3.7.x have been deprecated since 2013.05
and thus can be removed in 2014.05.
An automatic selection of 3.8.x headers is performed in the legacy menu.
An existing automatic selection of 3.6.x headers is modified to select
3.8.x.
As this patch removes the last occurrances of BR2_DEPRECATED_SINCE_2013_05,
the symbol is removed too.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The vala target package has been deprecated since 2013.05 and thus can be
removed in 2014.05. The host vala support is left untouched.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will resolve uClibc build error for configurations without large file
support.
Signed-off-by: Anton Kolesov <Anton.Kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
bump to v1.23-chrome32-firefox24
The latest releases use the cmake build infrastructure.
Converted the makefile to the cmake infrastructure.
The autotools infrastructure is no longer supported.
[Peter: correct license data, ensure it gets built after openssl if enabled]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If a kernel module is installed with incorrect permissions (0755 iso 0644),
it would get stripped in a way that would render the kernel module broken.
While the incorrect permissions are a developer error, it is a minor change
to prevent this mistake from causing incorrectly stripped modules.
This was reported with bug #6992:
https://bugs.busybox.net/show_bug.cgi?id=6992
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since qt's version has been bumped to 4.8.6 we can add support for
webkit on MIPS64 architectures (both big and little endian). It wasn't
possible on 4.8.5 because QtScript wasn't supported on MIPS64, but that
has been fixed on 4.8.6.
With reference to:
https://codereview.qt-project.org/#change,73022
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Raspberry Pi people are now considering there stable version to
be based on the 3.12.series:
http://www.raspberrypi.org/forums/viewtopic.php?f=29&t=75895
> The 3.12 kernel tree has long term support and we are moving to it.
Bump the Raspberry Pi defconfig to use the latest stable version of
the rpi-3.12.y branch, based on linux-3.12.18.
Bump the kernel headers at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Somehow the 'else' part got dropped from commit 3f82e9dbcd (use default gcc
4.8.2 for microblaze), breaking download for "normal" architectures.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream binutils 2.24 works fine for microblaze, no need for
Xilinx Git.
[Peter: disable older versions as suggested by Gustavo]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump of ltp-testsuite to a more recent version, the support
for AArch64 is now working correctly, so we can remove the exclusion
of this architecture from the ltp-testsuite package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add patch for src/make-event-names.py to use sysroot provided input.h
instead of hard coded '/usr/include/linux/input.h' (host system version)
one.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: add patches for modern kernel headers and to disable tests]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch to github helper while at it.
Depend on BR2_ARM_FPU_NEON || BR2_ARM_FPU_NEON_VFPV4 so that the toolchain
wrapper will add -mfpu=neon, and avoid the following error:
.../include/arm_neon.h:32:2: error: #error You must enable NEON instructions (e.g. -mfloat-abi=softfp -mfpu=neon) to use arm_neon.h
Note that this error doesn't show in the build-end.log referenced below
because of the log lines limit.
Fixes:
http://autobuild.buildroot.net/results/a2c/a2ca3fe245e410a738f4b10631a1414696a0edea/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable the internal toolchain backend for aarch64.
Tested with arm_foundationv8_defconfig and ARMs foundation v8 emulator.
Both glibc & eglibc work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libsanitizer requires wordexp() support which we lack in our current
default uClibc configurations (and it's fat & big).
Hence disable it when the toolchain is uClibc-based.
It only affects gcc 4.9+ since it's default on now for supported
platforms.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the arm processor types: add the cortex A12 variant supported by
gcc 4.9.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the recently released gcc 4.9.0.
Use 4.8.2 patches and remove those that no longer apply/are needed
(mostly PR fixes and xtensa).
libmudflap was removed upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script uses AC_TRY_RUN to detect if it can use the %llu format
string for printing the file size, which doesn't work when cross compiling.
We unfortunately cannot AUTORECONF the package, so instead patch configure
to force it on if we know we support it.
E.G.:
dd if=/dev/zero of=/home/ftp/file bs=1M seek=8000 count=1
1+0 records in
1+0 records out
total 1032
-rw-r--r-- 1 root root 8389656576 Jan 1 00:00 file
ncftp / > ls -l
-rw-r--r-- 0 0 8389656576 Jan 1 00:00 file
VS:
ncftp / > ls -l
-rw-r--r-- 0 0 4094689280 Jan 1 00:00 file
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug reports fixed in this release:
* 727779 : avdec_h264, matroskademux: crash while seeking (1.2 regression)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug reports fixed in this release:
* 724013 : Don't hardcode /usr/share/sounds/sf2 path in fluiddec
* 725137 : hlsdemux: fails to compute media playlist URL if there is a query parameter
* 725140 : hlsdemux: fails to correctly parse CODECS and RESOLUTION
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug reports fixed in this release:
* 725104 : qtdemux: reverse playback and video stream switching failure
* 722185 : souphttpsrc: racy " server does not support seeking " error
* 724619 : crash when reading the device name property of pulsesink
* 725124 : rtspsrc: Fix deadlock when task creation is no successful
* 725712 : rtpsession: Crash when RTCP FIR received with unknown SSRC
* 725860 : v4l2src: Fix using v4l2src with Hauppauge HDPVR video capture device
* 726777 : rtpjpegpay: payload size not correctly calculated
* 728017 : [regression]eos event could not be send out from gstrtpjitterbuffer.
* 728041 : rtph264depay: marks all output buffers as delta units when outputting avc format
* 724638 : aacparse : Missing resilience when no audio frame is found
* 727329 : check: souphttpsrc: unknown type name ‘SoupStatus’
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug reports fixed in this release:
* 693263 : typefinding: MPEG-2 video ES detected as H.263
* 683504 : playsink: deadlock when disabling subtitles and suboptimal disabling of subtitles
* 700770 : typefinding: mp3 file mis-detected as h263 video
* 723597 : tagdemux: Seek event in GST_FORMAT_TIME are converted to BYTES to early
* 724633 : oggdemux: ignores last page in push mode
* 724720 : rtspconnection: not possible to disconnect/reconnect read connection in tunneled mode
* 725313 : rtspconnection: closed() callback is never called in tunneled mode
* 725644 : typefinding: mp3 file is misdetected as H.263
* 726642 : rtspconnection: minor memory leak in error handling
* 727025 : adder: rework the logic to check if eos has to be sent.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bug reports fixed in this release:
* 724373 : Queue2 truncates its temp file when pipeline is paused
* 725517 : docs: Fix typos and remove unknown annotations
* 725809 : ghostpad: rare crash because of missing reference count on its target pad
* 727253 : parse: Bison generated file included in the release tarballs causes compile errors
* 727883 : baseparse: Memory leak of queue frames
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to the latest 4.1.7 version and improve the cross-build logic.
With the new patches the build is basically architecture-agnostic making
it possible to ditch the arch-specific cache to use a generic one.
Some toolchains might not be too happy with samba4 because of bitrot,
hopefully we'll find and fix or blacklist those with autobuilder help.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the gettextization of wget works by chance:
- host-gettext is added as a dependency to wget;
- gettextize is run as a post-patch hook.
But the dependencies are only guaranteed to be built and installed
for the configure step, not the patch step. Because post-patch hooks
are part of the patch step, we have no guarantee that the dependency
to host-gettext is done by the time we gettextize wget.
This happens to work by chance, since wget sorts alphabetically after
gettext, so we indeed have host-gettext built and installed by the
time we need to gettextize wget.
This is prone to fail in the parallel build case, since we can no
longer rely on alphabetical order in that case.
Instead, run gettextize in PRE_CONFIGURE_HOOKS to avoid the race.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[baruch: make the fix independent from the gettextize infra]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
AS reported by ovf on IRC, some of the firmwares we install are in fact
symlinks to some other files.
Install those files as well, and document the existing symlinks.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A new entry has been added to the "System Configuration" menu to allow
the user to set the location of additional user tables (besides the ones
defined in packages).
A user table is a text file, formatted using the mkusers syntax, which
describes the users on the target system, with their UID/GID, home
directory, password, etc.
The target root file system will be populated according the content of
these files.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: use plural TABLES; we need to remove the
intermediate users_table file, as it is no longer generated in
one shot, in case a previous run failed and did not remove it]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SMACK stands for Simplified Mandatory Access Control Kernel. It is a Linux
Security Module which provides a Mandatory Access Control mechanism,
like SELinux, but aiming towards simplicity.
This package provides the tools to load/unload the policy from the
kernel as well as a library allowing applications to interact with
SMACK. The proper kernel options are also set.
[Thomas:
- fixed license to be LGPLv2.1 instead of LGPLv2.1+. Even though the
debian/copyright file has the "or later" indication, none of the .c
source files carry it, so I suppose LGPLv2.1 is more correct.
- added !BR2_PREFER_STATIC_LIB dependency.
- added dependency on host-pkgconf, since Smack configure.ac uses
PKG_CHECK_MODULES.]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libcap provides a set of tools to manipulate capabilities, among which
`setcap(8)` and `getcap(8)`. A new menu entry has been added to install them.
[Thomas: mark the new option as requiring MMU support, because the
programs use fork(), and completely rework the new .mk logic as it
wasn't taking into account the BR2_PREFER_STATIC_LIB case.]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes two separate, but related build failures:
* A failure that was happening when the ARM CPU supports NEON,
floating point is enabled, but not with the NEON FPU. In this case,
the NEON ARM assembly is rejected by the assembler, with messages
like "Error: selected FPU does not support instruction -- `vmul.f32
q0,q0,q1'". To fix this, we pass -mfpu=neon when we build mplayer
with NEON support.
Fixes:
http://autobuild.buildroot.org/results/257/257a10e9cb5022bb09e0c6a03844be5b5b3e0bd4/
* A failure that was happening when the ARM CPU supports NEON, but
the configuration is anyway using soft-float. In this case, mplayer
attempts to compile NEON floating point instructions, but this
obviously fail in a soft-float context, with errors such as 'Error:
selected processor does not support ARM mode `vmov d0,r7,r8''. To
fix this, we do not allow NEON to be enabled when we are in a
soft-float configuration.
Fixes:
http://autobuild.buildroot.org/results/7b3/7b3c89fcd496c0bc80063f63ecd58c827e8077ea/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In most embedded systems, there is not much point in installing bash
completion files, especially since bash may not necessarily be present
on the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
E2tools is a simple set of GPL'ed utilities to read, write, and
manipulate files in an ext2/ext3 filesystem. These utilities access a
filesystem directly using the ext2fs library.
[Thomas: add toolchain dependencies as needed, use full Git hash, use
github helper, add support for host version.]
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit ea737fb100, which in
the end didn't fix the autobuilder problem. Since then,
fb80d28341 ('nodejs: add a patch forcing
link command to use CXX') was added, and was successfully tested.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Until now, our UPPERCASE function was implemented purely in make for
performance reasons, but our LOWERCASE function was implemented by
calling "tr", which was reasonable due to the fact that LOWERCASE was
rarely used, but future changes might make a more heavy usage of the
LOWERCASE macro.
We want this LOWERCASE function to turn a "_" into a "-" and not a
".", so we slightly adjust the existing FROM and TO lists to make this
possible. This doesn't change the behavior of the UPPERCASE macro
because both "-" and "." are converted into "_" by this function.
This change takes advantage of suggestions made by Arnout
Vandecappelle, who said they further improve the performance of
UPPERCASE and LOWERCASE by 30%/40%.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cross-compilation improvements integrated in Python rely on the
compiler exposing a line starting with LIBRARY_PATH when called with
-E -v. This is used by Python setup.py to find the installation
locations of libraries.
However, this LIBRARY_PATH line is not shown by very old compilers,
such as the gcc 4.2.x compiler used on the AVR32 architecture. This
causes libraries installed in the sysroot, such as libffi, to not be
detected by the setup.py script.
To fix this problem, this patch adds addtional logic to setup.py,
which consists in deriving the library paths from the sysroot
location, if no LIBRARY_PATH field was found.
Fixes:
http://autobuild.buildroot.org/results/7a6/7a65e381cc04bf8f74fd63a6dcda502f3c26aeef/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The cross-compilation improvements integrated in Python rely on the
compiler exposing a line starting with LIBRARY_PATH when called with
-E -v. This is used by Python setup.py to find the installation
locations of libraries.
However, this LIBRARY_PATH line is not shown by very old compilers,
such as the gcc 4.2.x compiler used on the AVR32 architecture. This
causes libraries installed in the sysroot, such as libffi, to not be
detected by the setup.py script.
To fix this problem, this patch adds addtional logic to setup.py,
which consists in deriving the library paths from the sysroot
location, if no LIBRARY_PATH field was found.
Fixes:
http://autobuild.buildroot.org/results/1aa/1aad2d677dbf7b0a3cb0120a35f45123124f51ab/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove target variant of the package, use labelled version
0.2.9 instead of latest.tar.gz, use 'make install' instead of doing
manual installation, add license informations.]
Signed-off-by: Will Wagner <willw@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target depends on the toolchain so add it as a dependency.
This also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The "toolchain-eclipse-register" target needs the toolchain so add
toolchain as a dependency.
This also fix the support to top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host variant of syslinux wasn't exposed anywhere, so the only way
to use it was to know that a "host-syslinux" target existed. Moreover,
thanks to commit 8e0d411898 ('syslinux:
install helper programs to the host'), the host utilities of syslinux
are automatically installed to $(HOST_DIR) when building the target
syslinux.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Even though syslinux is built for the target, it does create helper
programs intended to be run on the host such as syslinux and extlinux.
This change installs these helper programs to the host so that they may be
called by post image creation scripts.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current check is broken, as it only checks if the user's login
shell is bash, not what the system shell is.
Mimick the sequence found in the top-level Makefile to search for
bash, except for the fallback case, where we explicitly check that
'sh' is bash, by checking if it sets $BASH, so we know the fallback
case, in the top-level Makefile, to use 'sh' will indeed use bash.
Remove superfluous semi-colons ';' at the end of lines, they are
not needed in a shell script (this is not C!)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Andrew Barnes <andy@outsideglobe.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 971e331c54
('package/linux-headers: remove 2.6 snapshot'), we removed the support
for the Linux headers snapshot option, but we forgot to remove some
related help text in the main Config.in option of the Linux headers
package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we only pass --enable-opengl is at least one DRI driver is
enabled, since full OpenGL is only possible with a DRI driver (and the
X.Org stack). Otherwise, we pass --disable-opengl on the assumption that
OpenGL is not possible.
But mesa3d's ./configure is a bit weird: enabling OpenGL-ES and diabling
full OpenGL is an error (see autobuild failure below).
It turns out that, if there is no DRI driver enabled, but --enable-opengl
is passed, ./configure will behave properly wrt OpenGL-ES, and will not
build the full OpenGL libgl.
Thanks to Paul for explaining this.
Fixes:
http://autobuild.buildroot.net/results/61c/61c1c566dc0e829cb663ca30b1fd6cf9cc6cd931/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, graph-depends (and PKG-graph-depends) do not store the
intermediate 'dot' program.
Some users would like to get the dot program to be able to further
customise the generated graphs (eg. modify the layout, colorise some
of the packages...)
So, store the intermediate dot program alongside the generated graph.
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Maxime Hadjinlian" <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We do not need an X11-capable host SDL, so just disable X11 support.
This currently works if the build machine has the X11 development
packages installed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 4268d39, a patch was added to update libtool.m4 for MIPS n64 targets.
However, this caused the configure script to be regenerated during the
build steps, which in turn caused build failures on Fedora 12 hosts. In
ed73d1d, this was fixed by patching the installed libtool.m4 file
instead of the source file.
However, ed73d1d did not take into account that the target libtool will
also install libtool.m4 to staging, and that that version has
precedence over the one in HOST_DIR.
Therefore, this patch takes a different approach: the source file is
patched in the usual way, and instead the reconfigure is avoided by
touching the generated files.
On the target, we also cannot use the AUTORECONF mechanism because of
some mysterious Makefile.inc file. So just use the same approach and
wait for upstream to make a new release.
Fixes:
http://autobuild.buildroot.net/results/b86/b86a83c6549004f226e7255242e54ef4e50c5ec3/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This variable contains extra environment variables that we can not export
since they are clashing with some build systems (eg. BUILD_DIR with
u-boot).
So, we may need these variables for uses other than the user's hooks
for instrumentation. For example, we'll use them later on to export
BUILD_DIR to the download helper scripts.
Fix comment, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, vlc depends on mesa3d to provide the openGL support.
We now have a virtual package, libgl, which ensures openGL is available.
This is support for full OpenGL, which is only available when X.Org is
enabled, which is anyway a dependency of full OpenGL.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make mesa3d a provider for full OpenGL, as soon as a DRI driver is enabled.
Full OpenGL is only possible when:
- a DRI driver is enabled,
- and X.Org is enabled
Since DRI driver in fact depend on X.Org being enabled in the first place,
we can safely declare mesa3d as a full openGL provider as soon as at least
one DRI driver is enabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, only mesa3d is such a full-openGL provider.
But it is easy to see a few more cropping up at the door:
- NVidia's binary blob
- ATI's fglrx binary blob
Having this virtual full-openGL package will help when those are getting in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Full OpenGL is only provided when:
- a DRI driver is enabled,
- and X.Org is enabled
Since DRI driver depend on X.Org being selected, this means that we
can (have to) enable full OpenGL as soon as a DRI driver is enabled.
On the other hand, Gallium drivers, which currently do enable full
OpenGL, only really provide OpenGL EGL and GLES, not full OpenGL.
So we exclude Gallium drivers when checking whether to enable full
OpenGL in mesa3d.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, full-OpenGL is enabled by checking that at least one driver
is enabled. This is done by checking that the just-constructed lists of
drivers are not empty.
But we already have a variable that is set to 'y' as soon as a driver
is selected:
- DRI drivers select BR2_PACKAGE_MESA3D_DRI_DRIVER
- Gallium drivers select BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
- both BR2_PACKAGE_MESA3D_DRI_DRIVER and BR2_PACKAGE_MESA3D_GALLIUM_DRIVER
select BR2_PACKAGE_MESA3D_DRIVER
So, BR2_PACKAGE_MESA3D_DRIVER is set to 'y' as soon as at least one
driver is selected. We can use that variable rather than comparing the
lists of drivers.
Also, rearrange the code in a more logical way, by moving the code that
enables OpenGL nearer to the code enabling EGL and GLES.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
OpenGL EGL needs udev support, so add a comment stating so.
Also, reword the OpenGL EGL prompt to be in the same format as the
OpenGL ES prompt (and like the full OpenGL prompt that will shortly
be added, too.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make mesa3d a menuconfig, ie. a sub-menu on the boolean option.
Move drivers and additional API selections out of their own submenus,
add a comment as separator.
This will make it easier to further re-arrange the config items in
the following patches, to fix-enhance the packaging to handle the
full-openGL provider stuff.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, X.Org drivers that need mesa3d forcibly select it.
We'll soon switch mesa3d to being a provider of the full OpenGL virtual
package, to come in a later patch.
It is bad practice to select a provider, as it can generate configuration
inconsistencies.
So, switch all X.Org video driver that need mesa3d to actually depend on
it, rather than forcibly select it.
To be noted: xf86-video-mach64 already used a 'depends on' rather
than a 'select'.
At the same time, move the intel drivers dependencies to the top.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thomas reported that the libdrm-radeon dependency on x86 (32- or 64-bit)
dates back to the time where it also depended on libpciaccess.
Now that the libpciacess dependency has been dropped, Thomas managed to
build a libdrm-radeon on something else than an x86 (an ARM for example).
Make libdrm-radeon no longer depend on x86
As a side effect, this fixes some potential "unmet direct dependencies"
from the xdriver_xf86-video-ati package (which was the initial problem
I was trying to solve.)
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
autoreconf -vif lib/cpluff
autoreconf: Entering directory `lib/cpluff'
autoreconf: running: autopoint --force
Can't exec "autopoint": No such file or directory at /home/buildroot/output/host/usr/share/autoconf/Autom4te/FileUtils.pm line 345.
autoreconf: failed to run autopoint: No such file or directory
autoreconf: autopoint is needed because this package uses Gettext
make[1]: *** [lib/cpluff/configure] Error 1
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the blind option BR2_PACKAGE_MESA3D_DRI_DRIVER depends
on !STATIC.
But this option is also selected by the various DRI drivers, and
none of them currently depend on !STATIC (although there is a comment
stating DRI drivers need !STATIC, there's nothing to enforce that).
So, we could well end-up with an inconsistent configuration, where some
DRI drivers are selected even though STATIC is set.
Enclose all DRI drivers in an 'if !STATIC' condition, remove the
dependency from the blind option, move the comment so it is nearer
the affected drivers, rephrase the comment to match the rules about
dependencies on toolchain features.
[Thomas: really use the right wording for the comment about the
dynamic library dependency.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Paul Cercueil <paul@crapouillou.net>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If systemd is chosen as init system, liblogging will enable the
installation of compatibility libraries in systemd.
When liblogging will be updated to depend on libsystemd.so, this
selection will have to be removed.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since systemd 209, some libraries have been merged into libsystemd.so:
- libsystemd-daemon.so
- libsystemd-id128.so
- libsystemd-journal.so
- libsystemd-login.so
A new configuration menu entry has been added to enable the installation
of compatibility pkg-config files, so that programs that depend on them
can still be built.
[Thomas: as suggested by Yann during the review, add an else clause
with --disable-compat-libs.]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The usual way to enable a package using the package infrastructure is to
use a config option so instead to add the toolchain package to the
TARGETS variable in the Makefile add a config option like all the other
toolchain packages.
[Thomas: remove comment that no longer made sense in the main
Makefile, and add a comment above the new hidden Config.in option to
explain what it is useful for.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes mesa3d build errors:
http://autobuild.buildroot.net/results/d10/d105a0b3ca11fad34f9a2dae0dae9bd041d918a6/http://autobuild.buildroot.net/results/d71/d7121443715024d15a66ff1abf1261803c10cd35/http://autobuild.buildroot.net/results/ce6/ce64164d76972f82acab277afc9c95a876c6433e/
checking for python2... python2
checking python2 module: libxml2... no
configure: error: failed to find required module libxml2
make: *** [/home/test/test/1/output/build/mesa3d-10.0.4/.stamp_configured] Error 1
mesa3d needs python2 bindings installed by libxml2. To enforce their build
option BR2_PACKAGE_HOST_LIBXML2_PYTHON is used exclusively by mesa3d so this
patch does not affect other packages.
Without this patch host-libxml2 installs the python bindings in
$(HOST_DIR)/usr/lib/$(PYTHON3_VERSION_MAJOR) using this defconfig:
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_PYTHON3=y
because $(HOST_DIR)/usr/bin/python points to $(HOST_DIR)/usr/bin/python3:
Quote from host-libxml2 configure log:
Found python in /home/fli4l/br2/buildroot/output/host/usr/bin/python
Found Python version 3.4
HOST_$(PACKAGE)_NEEDS_HOST_PYTHON does not work here because libxml2 does
not use the python-package infrastructure.
libxml2-python2.patch extends the python detection code in host-libxml2 to
first look for python2, to keep the patch small I did not update the indentions:
Found python2 in /home/fli4l/br2/buildroot/output/host/usr/bin/python2
Found Python version 2.7
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thanks to the 2 previous patches of the series, BR_PATH contains
all locations in which host-packages may install programs.
This patch replaces the occurrences TARGET_PATH and HOST_PATH with
BR_PATH, everywhere these variables are used in the *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is needed for applications like Zile
[Thomas:
- use $(...) instead of ${...} to reference LIBGC_VERSION
- add missing dependency on libatomic_ops dependencies
- fix DEPENDANCIES -> DEPENDENCIES
- replace += by = in dependencies definition
- add host-pkgconf to the list of dependencies
- fix license, it's a X11-style permissive license
- fix license file, COPYING didn't exist, use README.md instead]
Signed-off-by: Alex Bennée <alex.bennee@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the introduction of packages that select
libatomic_ops, this commit adds an hidden
BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS option which allows to easily
depend on the architectures that libatomic_ops is available for.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
python-pyrex does not support python3.
So, using the *_NEEDS_HOST_PYTHON infrastructure will make sure we won't try
building it for python3. Besides, it will automatically take care of adding the
right host-python package to the dependency list.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
nodejs build system is based on python, and it does not support python3.
This patch makes sure python2 is used for the build.
Note that, setting PYTHON=... at configure time or in the make
environment is not enough to override all the hard-coded python call, so
we have to sed some python scripts to avoid being screwed.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since version 1.4 jquery-mobile includes the core-jquery.
No need for extra dependencies.
[Thomas: remove trailing spaces in Config.in file, and rewrap help
text.]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to sources.buildroot.net cached zipfile.
Upstream changed the zipfile and the internal directory structure
without notifying anyone or changing the filename thus causing breakage.
And we can't use github release tarballs since they are not minified.
And we shouldn't reflect this in the install hook since an old cached
tarball wouldn't work, and we'd break anyone using the old package file
with the new one too. Thanks upstream! Fixes:
http://autobuild.buildroot.net/results/43a/43a16a44a26b38f4c6a2f352d8bfe5e07af6b2e3/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package uses the 'msub' instruction which is available only in
mips32 and mips64 ISAs.
[Thomas: replicate the new dependency to the comment.]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linaro has started to release ARM big endian toolchains, so we
integrate this toolchain in the external toolchain logic of
Buildroot. Since ARM big endian is probably going to be a lot more
uncommon than ARM little endian, we will only support one version at a
time of this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The information "To use this toolchain, you must disable soft float
usage." which was visible in the help text of Linaro toolchains is no
longer useful, since those toolchains are only visible when the ARM
EABIhf ABI is selected, which by design is not compatible with
soft-float.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Drop obsolete/applied patches. Refresh the rest, and add sequence numbers.
Add a patch fixing build against uClibc when UCLIBC_HAS_LONG_DOUBLE_MATH is
missing.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fswebcam doesn't play nicely with static build as it doesn't track its
indirect dependencies in link time. Fixing this requires tracking all indirect
optional dependencies, which is tedious and error prone. Just disable static
build.
This build failure didn't show on the autobuilder for some reason.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Nios-II Sourcery external toolchain (the only Nios-II we currently
support) exports broken kernel headers. In particular, these kernels should
be exported using the "headers_install" rule which applies a set of fixes
on the kernel headers so they are suitable for userspace usage.
In order to fix this, add a post-install hook to perform the header fixes
ourselves. The result is equivalent to apply the "headers_install" rule.
Fixes:
http://autobuild.buildroot.net/results/c32/c32ad4bac5f651502e551f7733f702afaa0e742a/
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Al packages depend on 'toolchain'. Currently, 'graph-depends' graphs this
dependency. The resulting graph is thus cluttered with less-than-useful
information.
Instead, do not graph the 'toolchain' dependency for any package, save
for the fake 'all' package. The graph is now a bit more readable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the complete dependency chain of a package is used to
generate the dependency graph. When this dependency chain is long,
the generated graph becomes almost unreadable.
However, it is often sufficient to get the first few levels of
dependency of a package.
Add a new variable BR2_GRAPH_DEPTH, that the user can set to limit
the depth of the dependency list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we are using a crude, ad-hoc parsing of argv[].
This is a limiting factor to adding new options.
Use argparse instead, and introduce a single argument for now:
--package, -p PACKAGE
In the (near) future, we'll be able to add more option arguments,
such as depth-limiting for big graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump raspberrypi_defconfig to use the latest revision from the stable
rpi-3.10.y branch, which is based on v3.10.36.
Bump the kernel headers used for the toolchain at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Of utmost importance, this bump allows to overclock the RPi to even
higher frequencies: ARM > 1200MHz, core > 600MHz, RAM > 600MHz. :-)
To be used with caution, of course! :-)
Fixes and enhancements for:
- clocks : allow higher overclocks
- audio : PCM channel expansion/conversion
- video : stutter on streams without b-frames, choice of scaling /kernel/
- camera : padding-removal, new YUV and BGR modes
- decoder: timestamps fixes, frames interval tracking
- encoder: misc jpeg encoding fixes, save inline motion vectors
- display: don't require EDID on HDMI
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If BR2_PACKAGE_OPUS is selected then vlc will be built with support for
opus passing "--enable-opus" option to the configure script. But when
the configure script checks for the opus library it also checks for the
ogg library at the same time, so if only opus has been installed and not
ogg, then it will fail with an error message like this one:
checking for OPUS... no
configure: error: Library ogg opus needed for opus was not found
Fixes:
http://autobuild.buildroot.net/results/4da/4da8e7cfb35c351e5d623835118512248d331d16/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building RTAI userspace applications requires having the RTAI headers
and libraries installed to the staging directory, so this patch adds
RTAI_INSTALL_STAGING = YES.
In addition, this patch fixes up the rtai-config script, but does that
manually, because the rtai-config script doesn't match the convention
that the common <pkg>_CONFIG_SCRIPTS logic is designed for. It also
specifies a special directory for the RTAI headers, so that they don't
get mixed up with kernel headers.
Finally, it updates the RTAI download address to use the new correct
location.
[Thomas: fix commit log.]
Signed-off-by: Andrew Barnes <andy@outsideglobe.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 6251ccf032 ('python3: fix the
value of PYTHON3_PATH') tried to fix the value of PYTHON3_PATH, but
did it incorrectly: it changed PYTHON_VERSION_MAJOR to
PYTHON_VERSION3_MAJOR, while it should have been
PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Buildroot currently ships a very minimal build configuration file for exim,
which disables most optional features. This is not coherent with the runtime
configuration file, taken verbatim from the exim distribution, which enables
some of these features.
The visible symptom is an error during boot that prevents exim from starting:
Exim configuration error in line 541 of /etc/exim/configure:
router dnslookup: cannot find router driver "dnslookup"
In order to fix this problem, we change the way exim is configured at build
time. Instead of blindly copying a minimal Buildroot-provided configuration
file, we now copy the exim-provided one and then tweak it to change the needed
options. This actually makes the configuration closer to standard exim.
As the amount of tweaking is remarkable, we also define a few macros to make
it easier and more readable.
This new approach was suggested by Bernd Kuhls.
Reported-By: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit slightly adjusts rsh-redone.mk to better match the usual
Buildroot conventions:
* Variables are named in upper-case, prefixed by the name of the
package.
* No re-use of one _CMDS definition in another, and instead usage of
a RSH_REDONE_MAKE_FLAGS variable to pass identical flags betwen
build and install steps.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While there is a rcp.c in the source tree, the Makefile does not have
a rule nor logic to build it, and it anyway doesn't build at all.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Pyrex is a language that allows you to mix python and C code in a
single .pyx description file. This file is then rendered into C
code by the pyrexc host tool. That C file then can be used within
an application build or as part of the normal distutils build
process used to build a Python extension module.
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The github helper does not retrieve a suitable tarball including the polarssl source code,
thus the change on the download url.
This version of mongrel2 should be compliant with latest ZeroMQ versions.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Tested-by: Jerzy Grzegorek <jerzy.grzegorek at trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erlang/OTP 17.0 is a new major release with new features, characteristics
improvements, as well as some minor incompatibilities.
Some highlights of the release are:
- Erlang/OTP has been ported to the realtime operating system OSE.
- Maps, a new dictionary data type (experimental)
- A more natural mapping from ASN.1 OCTET STRING and BIT STRING to Erlang
types, and other ASN.1 improvements and optimizations
- The {active, N} socket option for TCP, UDP, and SCTP
- A new (optional) scheduler utilization balancing mechanism
- Migration of memory carriers has been enabled by default on all ERTS
internal memory allocators
- Increased garbage collection tenure rate
- Experimental "dirty schedulers" functionality
- Funs can now be given names
- Miscellaneous unicode support enhancements
- A new version scheme for OTP its applications has been introduced
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new release adds a new userspace tool called ubiblock. This is
used to control UBI's new block device feature which will be added
in Linux v3.15.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Old toolchains, with old gcc that do not support -print-sysroot, break the
kernel-headers version check script: it fails to find the sysroot of the
toolchain, and thus ends up including the host's linux/version.h.
Most of the time, this will break early, since the host's kernel headers
will not match the toolchain settings.
But it can happen that the check is succesful, although the configuration
of the toolchain is wrong:
- the custom toolchain has kernel headers vX.Y
- the user selected vX.Z (Z!=Y)
- the host has headers vX.Y
In this case, the check passes OK, but the build of some packages later on
will break (which is exactly what those _AT_LEAST_XXX options were added to
avoid).
Fix that by passing the sysroot to the check script, instead of the cross
compiler.
We get the sysroot as thus:
- for custom toolchains, we use the macro toolchain_find_sysroot. We can
do that, because we already have a complete sysroot with libc.a at that
time.
- for internal toolchain using a custom kernel headers version, we just
use $(STAGING_DIR). We can't use the macro as for custom toolchains
above, because at the time we install the kernel headers, we do not yet
have a complete sysroot with a libc.a. But we can just use
$(STAGING_DIR), since we're only interested in the kernel headers.
For all other types of toolchains, we already have the _AT_LEAST_XXX options
properly set, so we need not add a check in this case.
Fixes:
http://autobuild.buildroot.net/results/f33/f331a6eff0b0b93c73af52db3a6b43e4e598577e/http://autobuild.buildroot.net/results/a57/a5797c025bec50c10efdcff74945aab4021d05e4/
[...]
[Thanks to Thomas for pointing out the toolchain_find_sysroot macro!]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Turn off building compatibility layers for old/broken versions of
standard functions (strstr, strtoul, strtod) with the assumption that
anything buildroot is using as a standard C library will be good enough
to not have broken behavior.
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add icu to the comment-list of packages requiring threads.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc can not use timezone info from tzdata as-is, but accepts setting
the local timezone in /etc/TZ.
[Peter: strip quotes/use local TZ_LOCALTIME variable]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: make it a blind package; little tweak to help text]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tzdump takes timezone info in the installed tzdata format, and
outputs timezone info parseable by uClibc.
[Peter: adjust host-zip dep, simplify build/install, use INSTALL variable]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: split zic header-install to its own cset]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc uses its own format for timezone info. OTOH, we can generate
uClibc-compatible timezone info from existing tzdata.
Add a host-version of tzdata, so we can harvest its installed timezone
info.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: strip quotes/use local TZDATA_LOCALTIME variable]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[alexandre.belloni: move from "tzdata" to "system configuration"]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: move into the BR2_TARGET_TZ_INFO conditionnal block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch modifies the cppcms package in order to support uClibc-based
toolchains.
The booster library by default compiles with the posix backend under
Linux, but this needs monetary.h which isn't provided by uClibc, so
work around that with the help of the DISABLE_POSIX_LOCALE configure
option.
Signed-off-by: Lucile Quirion <lucile.quirion@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mkostemp() is missing with older version of uClibc (uClibc <= 0.9.33).
So, we need to check if mkostemp() is available.
If not, we use a wrapper function based on mkstemp() to implement it.
Since util-linux v2.23, mkostemp() is called with O_CLOEXEC flag.
If we use a define to mkstemp() to implement mkostemp(), flags will be
discared.
mkstemp() will pass O_RDWR|O_CREAT|O_EXCL, but not O_CLOEXEC, which
means that the file descriptor will no longer be closed automatically
upon exec().
To avoid to discard the flags, we add a call to fcntl() to set O_CLOEXEC
flag just after mkstemp().
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disabling SNMPv3 support also removes the dependency on OpenSSL, which is
pretty large (over 2 MB of uncompressed filesystem size on an ARM926 platform).
BR2_PACKAGE_SNMPPP_SNMPV3 defaults to yes for backward compatibility with
previous Buildroot releases, where SNMPv3 was always enabled.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SNMP++ logging can be overly verbose, and according to the SNMP++
documentation, disabling logging "increases performance drastically and
minimizes memory consumption".
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The filename of the SNMP++ sources has changed.
The old one is still working because the server automatically redirects to the
new file, but it is safer to use the official name.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit d1f325f554 (xzcat: treat as host prerequisite and build if
needed) host-xz is always built when the host does not have xz installed.
Removed all other host-xz dependencies.
[Peter: don't drop for host-squashfs, as that needs libxz development files]
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes the following patch application error when building for i.MX6:
Applying gst-fsl-plugins-0004-Fix-libgstfsl-linkage-add-lrt-for-shared-memory-func.patch using patch:
patching file configure.ac
Hunk #1 succeeded at 178 with fuzz 2 (offset 5 lines).
patching file libs/Makefile.am
Hunk #1 FAILED at 12.
1 out of 1 hunk FAILED -- saving rejects to file libs/Makefile.am.rej
Patch failed! Please fix gst-fsl-plugins-0004-Fix-libgstfsl-linkage-add-lrt-for-shared-memory-func.patch!
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Peter Seiderer <ps.report@gmx.net>
Cc: Eric Nelson <eric.nelson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Once again, github updates the source download url.
Even if only the zip archive link is advertised on the repositories'
page, the *.tar.gz is still available.
It is worthy to note that the tarball's content differs depending if
it has been fetched from the former and the new url (the root directory
name changes).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we introduced the _AT_LEAST_XXX for the kernel headers, people
using pre-built custom toolchain now have to specify the version of
the kernel headers their custom toolchain uses.
So, when we detect that there is a mismatch between the selection in
the menuconfig, and the actual version of the headers, we currently
only bail out with a terse message "Incorrect selection of kernel
headers".
This could be confusing some, and getting the version of the headers
used by the toolchain is not trivial (well, it's very easy, but not
trivial.)
This patch changes the way we report the error by moving the message
into the test-code, and by printing the expected and actual versions
of the kernel headers.
BUT! To get this pretty error message, we need to run the
test-program, so we can not use the cross-toolchain, we have to use
the native one.
BUT! The native one has its own linux/version.h header, so we can not
simply include it.
So, we ask the cross-compiler where its default sysroot is, and use
that to then force-feed the cross linux/version.h to the native
toolchain.
[Thomas: augment commit log with a message provided by Yann, fix
coding style to not have spaces after opening parenthesis and before
closing parenthesis, reformatted the message "Incorrect selection..."
to make it fit on one line.]
Reported-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This option allows to customize the "vendor" part of the
toolchain tuple, where the toolchain tuple has the form
<arch>-<vendor>-<os>-<libc>. Use this option in situations
where gcc might make different decisions based on the vendor
part of the tuple.
[Thomas: move the config option in a slightly different place, so that
it does not appear between the C library selection and the C library
options.]
Signed-off-by: "Noam Camus" <noamc@ezchip.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The manual now features a new section with instructions about how to add a
virtual package.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[yann.morin.1998@free.fr: move down statement about provider's .mk]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Package's options should be named after the package.
Lua is an interpreter, but the package is named 'lua'. So we want to
name the config option with '_LUA_', not with '_LUA_INTERPRETER_'
Besides, naming them with '_LUA_INTERPRETER_' might be confusing, since
there is a package named 'luainterpreter'.
Since the renamed options are part of a choice, we can't use the legacy
options to select the new ones. So we instead instruct the user to go
select the appropriate option in the choice.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Francois Perrad <fperrad@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Lua binding option of libuci uses fork() so it needs the MMU.
Finally, libuci fails to build with Lua 5.2 because it uses functions
removed from this version. Fix it by activating the option only with
Lua 5.1.
[Thomas: use LIBUCI_ and not LIBUBOX_ otherwise the patch doesn't
work.]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When adding a new user (or a new group), we would get warnings, like:
[...]/support/scripts/mkusers: line 145: [: too many arguments
This is because we're checking if a UID (or a GID) is already defined,
and/or is different from the requested one, both checks in the same
test.
Of course, if a UID (or a GID) is not defined, it does not have a value,
so we can not compare it to an integer.
Fix that by splitting the test in two, so the second is only executed if
the first is sucessful.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rebuilding as.info with makeinfo version 5.2 results in a build error,
even with pristine binutils source. Dropping hunks that change *.texi*
files avoids documentation rebuild.
Reported-by: Vincent Stehlé <vincent.stehle@freescale.com>
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use $(INSTALL) instead of install
- add AR and RANLIB variables in the local makefiles, so that the
cross toolchain ar and ranlib utilities are used instead of the
native ones.
- move the init script initialization to the EXIM_INSTALL_INIT_SYSV
variable.
- Use parenthesis instead of curly braces to reference TARGET_DIR.]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PYTHON3_PATH was incorrectly referencing the site-packages of
Python 2 packages, due to the usage of PYTHON_VERSION_MAJOR, instead
of PYTHON3_VERSION_MAJOR. This commit fixes that by using the correct
variable, which in our testing fixed the build of python-pyasn against
python3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Scons build-system needs python2 as interpreter (it does not support
python3 yet).
So, we need to force the host dependency to get the python2 interperter
built and available in the host tree to be able to build host-scons
itself and to build scons-based packages, whatever is the python
interpreter for the target.
This patch also makes sure scons will in be called using the right
python interpreter when invoked via $(SCONS).
Fixes:
http://autobuild.buildroot.net/results/11e6c8c8d79d56ed43daf52e6d6dc80847709926/
[Thomas: take into account the rename of the new variable to
<pkg>_NEEDS_HOST_PYTHON.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages need a host-python interpreter with a version different
from the one installed in the target to run some build scripts (eg.
scons requires python2 to run, to build any kind of packages even if
the python interpreter selected for the target is python3).
In such cases, we need to add the right host-python dependency to the
package using the host-python-package infrastructure, and we also want
to invoke the right host python interpreter during the build steps.
This patch adds a *_NEEDS_HOST_PYTHON variable that can be set either
to 'python2' or 'python3'. This variable can be set by any package
using the host-python-package infrastructure to force the python
interpreter for the build. This variable also takes care of setting
the right host-python dependency.
This *_NEEDS_HOST_PYTHON variable only affects packages using the
host-python-package infrastructure.
If some configure/build/install commands are overloaded in the *.mk
file, the right python interpreter should be explicitly called.
If the package defines some tool variable (eg.: SCONS), the variable
should explicitly call the right python interpreter.
[Thomas:
- fixes to the commit log and documentation suggested by Yann
- rename the variable from <pkg>_FORCE_HOST_PYTHON to
<pkg>_NEEDS_HOST_PYTHON, as suggested by Yann
- do not allow any other value than python2 and python3 in
<pkg>_NEEDS_HOST_PYTHON, as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch reworks the way python3 and python3-config symlink are
installed.
Buildroot wants to control these symlinks' installation:
* the python3 symlink should be unconditionally installed in the target
tree, and the python3-config symlink in the staging tree, since it is
the only python package built and installed in the target tree if the
user selected it;
* the python3 and python3-config symlinks should only be installed in
the host tree when python3 is the selection of the user for the
target.
[Thomas: fix comment as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This change adds a patch to python disabling the installation of the
python and python-config symlinks.
This allows Buildroot to control these symlinks' installation:
* the python symlink should be unconditionally installed in the target
tree, and the python-config symlink in the staging tree, since it is
only built and installed in the target tree if the user selected it;
* the python and python-config symlinks should only be installed in
the host tree when python(2) is the selection of the user for the
target.
Otherwise, when python3 is selected for the target, the host-python
may be required to built some packages. In such cases, the python
symlink should points to python3 (so should the python-config
symlink) to reflect the staging/target tree.
[Thomas: fix comments according to Yann's suggestions, and replaced
python(2) by python2, as suggested by Yann.]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host-luarock dependency is not always satisfied for the extract
phase because the %-extract target is not anymore in the dependency
chain.
To be sure that the dependency is satisfied add the dependency to the
stamp file $(%_TARGET_EXTRACT) instead of the %-extract target.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Francois Perrad <fperrad@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a quick workaround against the recently-introduced circular
dependencies hell:
package/xbmc/Config.in:10:error: recursive dependency detected!
package/xbmc/Config.in:10: symbol BR2_PACKAGE_XBMC depends on BR2_PACKAGE_HAS_OPENGL_EGL
package/opengl/libegl/Config.in:1: symbol BR2_PACKAGE_HAS_OPENGL_EGL is selected by BR2_PACKAGE_MESA3D_OPENGL_EGL
package/mesa3d/Config.in:92: symbol BR2_PACKAGE_MESA3D_OPENGL_EGL depends on BR2_PACKAGE_MESA3D
package/mesa3d/Config.in:1: symbol BR2_PACKAGE_MESA3D is selected by BR2_PACKAGE_LIBEVAS_GL
package/efl/libevas/Config.in:149: symbol BR2_PACKAGE_LIBEVAS_GL is part of choice <choice>
package/efl/libevas/Config.in:144: choice <choice> contains symbol <choice>
package/efl/libevas/Config.in:144: choice <choice> contains symbol BR2_PACKAGE_LIBEVAS_SDL_GL
package/efl/libevas/Config.in:90: symbol BR2_PACKAGE_LIBEVAS_SDL_GL depends on BR2_PACKAGE_SDL_X11
package/sdl/Config.in:24: symbol BR2_PACKAGE_SDL_X11 depends on BR2_PACKAGE_SDL
package/sdl/Config.in:1: symbol BR2_PACKAGE_SDL is selected by BR2_PACKAGE_PYTHON_PYGAME
package/python-pygame/Config.in:1: symbol BR2_PACKAGE_PYTHON_PYGAME depends on BR2_PACKAGE_PYTHON
package/python/Config.in:1: symbol BR2_PACKAGE_PYTHON is selected by BR2_PACKAGE_XBMC
Until this is properly fixed with the addition of a virtual package for
full-openGL providers, just depend on mesa3d instead of selecting it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
openswan's Makefile uses gcc instead of $(CC) for gcc version detection
to use advanced warning/error options. The problem is that if the
host gcc version is newish (>=4.6) and the gcc for the target is not it
uses unsupported options.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This fixes compilation of huge source files that have jumps with offsets
greater than 128 Kbytes, that otherwise fails with such messages:
{standard input}:65267: Error: operand 1 of 'j' has out of range value '131089'
{standard input}:106879: Error: operand 1 of 'j' has out of range value '4294833951'
Fixes:
http://autobuild.buildroot.net/results/e45/e450d5efc7435035c956bb962d598837648f319d/
Backported from: a82c7d9030b67a6a76a5403d0e1641f9e42141ac
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Collecting literals into separate section can be advantageous if that
section is placed into DTCM at link time. This is applicable for code
running on bare metal, but makes no sense under linux, where userspace
is isolated from the physical memory details. OTOH placing literals into
separate section breaks build of huge source files, because l32r
instruction can only access literals in 256 KBytes range.
Add -mtext-section-literals into xtensa ABI to fix build issues of
packages with huge sources.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
eudev uses GCC pragma diagnostics [1] for some of its logging functions,
to circumvent -Wformat-nonliteral. This feature is only available in GCC
>= 4.6.
The external toolchains for some architectures (PowerPC, SuperH) are based on
GCC 4.5. So eudev will not compile when using them.
systemd also uses the pragma diagnostics, but its dependency on Linux
headers >= 3.8 for the toolchain indirectly forces recent versions of
GCC.
This workaround enables the pragma diagnostics only when using GCC >= 4.6.
This means that if the user uses GCC 4.5 and explicitly sets the options
-Werror -Wformat-nonliteral, the build will fail...
[1] http://gcc.gnu.org/onlinedocs/gcc/Diagnostic-Pragmas.html#Diagnostic-Pragmas
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During configuration of Valgrind we check does the compiler support
-march=mips32 and -march=mips64. If compiler supports these flags we are
using them as default flags for mips32 and mips64.
"VALGRIND_AUTORECONF = YES" needs to be added to valgrind.mk because
this patch modifies the configure.ac.
Original upstream patch:
fdf6c5aea4
Fixes:
http://autobuild.buildroot.net/results/213/21352bcbe1b309fef0f996c275cdfcda08619d96/
[Thomas: add reference to the upstream patch into the patch itself, in
addition to the commit log.]
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A check for Java has been implemented in dependencies.sh, but during the
review, the name of the variable had been changed from:
BR2_HOST_NEEDS_JAVA to BR2_NEEDS_HOST_JAVA
as it is more accurate.
The change was not made in XBMC and as such, you could start the build
of XBMC without Java on your system.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If acl is selected then add it to dependencies so it can be used by
rsync in a predictable fashion.
Extended attributes are handled directly via linux, there's no need
for the xattr package/library.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Make the host gettextize tool non-interactive to avoid stalling for user
confirmation when using it to fix up a package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit b1ec31a4dd ('ifplugd: only
install default action if not provided in skeleton') introduced a
small typo, which we fix in this commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
mesa3d being selected is not enough for it to be an EGL provider.
The corresponding options BR2_PACKAGE_MESA3D_OPENGL_EGL should be
enabled. This option already correctlt selects BR2_PACKAGE_HAS_OPENGL_EGL.
So, only declare mesa3d as an EGL provider if the option is set.
Ditto for GLES.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <berndkuhls@hotmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The commit hash chosen by Yann exists in the repository accessible by
git://, but not the one accessible by http://, which is lagging 3
commits behind the git:// repository, for some reason.
For the time being, revert to the latest commit available in the
http:// repository.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
http://patchwork.freedesktop.org/patch/14670/ (State Accepted)
"This driver has not received server updates such as mibstore removal
and conditional compiling of xaa architecture. This indicate an implicite
decisison to remove the driver from active support and future releases.
This driver is used for SGI workstations Indy and Indigo2. Manufacturing
stopped in 1997 and SGI support ended in 2012."
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dbus-triggerd is a little daemon that can monitor dbus events, match
them against some watch-expressions, then trigger shell-commands.
It can be used in any situation where dbus-interaction is needed, and
shell script is preferred over other languages.
[Thomas: also pass $(TARGET_MAKE_ENV) in the environment.]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In this new revision, there is no longer transponders data, so dvb-apps
now only installs the dvb-apps utilities.
Packages that needs the transponders data have now all been switched to
use dtv-scan-tables instead, so we don't need a legacy option for the
transponders data.
However, we add a legacy option for the utilities option, just to inform
the user of the new behaviour.
Sadly, a user that had dvb-apps selected just to get the transponders
data will now get the full dvb-apps package installed. There's nothing
we can really do about this.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a transitioning solution before switching packages that need the
transponders data, to use dtv-scan-tables instead of dvb-apps.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dvb-apps package used to carry pre-scanned transponders data. These
transponders data have now been moved out of dvb-apps, and into their
own repository.
So, until we bump the dvb-apps package (to come in a follow-up patch),
dtv-scan-tables is exclusive to dvb-apps.
To be noted: the licensing information for those data is dubious. The
package carries the COPYING and COPYING.LIB files, hinting that the data
is covered by the GPLv2 *and* the LGPLv2.1. This is incoherent, and
dubious:
- since GPLv2 is a superset of LGPLv2.1, the actual license would be
just plan GPLv2;
- the transponders data is just a collection of 'facts': the
frequencies of each transponder; as such, it is usally not considered
to be a 'work' as per traditional copyright, and thus should be in
the public domain [cue the zoneinfo DB not so long ago].
But since this is a difficult question, we'll leave to the user to sort
these things out.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, we're using an untagged commit of dtc. Since inclusion in
buildroot, version 1.4.0 has been released, which includes new
endian-annotated type defintions.
We want to use these type definitions in kexec-lite, so update to the
new release.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add patch to allow passing CFLAGS from the environment, use
TARGET_CONFIGURE_OPTS instead of manually passing CC/LD, add upstream
URL in Config.in, use the Makefile install target instead of
open-coding the installation in iprutils.mk.]
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: allow compilation with either expat or libxml2, reword the
license description to indicate that it's MIT *or* GPLv3. ]
Signed-off-by: Denis Bodor <lefinnois@lefinnois.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After adding support top-level parallel make the rootfs-* dependencies
were not anymore considered for the "source" and "legal-info" targets
because the rootfs-* targets were removed from TARGETS variable and
placed in the TARGETS_ROOTFS variable so to fix the issue use use both
"TARGETS" and "TARGETS_ROOTFS" variables.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add patch to add stdarg.h include needed on uClibc, add
missing upstream URL in Config.in, fix license to be LGPLv2.1+ instead
of LGPLv2.1]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The manual always uses the format with multiple dependencies. This only
add an example where is a single dependency to show that this format is
applicable regardless of the number of dependencies.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we use Google+ to share our news, this add a logo on the menu bar,
which links to the Buildroot profile.
[Peter: change link to Buildroot account]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building o32 ELF files for MIPS64 is an exotic configuration that nobody
should be using. If o32 is required, then is better if it's built for
MIPS 32-bit cores so only 32-bit instructions will be used leading to a
more efficient o32 usage.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The S59snmpd script has a strange mix of tabs and spaces. Replace
tabs with spaces, and also remove unnecessary line continuations
from the start-stop-daemon lines, as none of them go beyond 80
columns.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ncurses check need to be disabled if ncurses package is not
selected.
If we don't do that, host's ncurses5-config may be used by
configure script.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A few people have already asked why XBMC depends on host-sdl_image and
host-sdl.
Since this is not obvious, this patch add a comments explaining why it's
needed.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host variant of sdl inherited the dependencies and conf opt from
sdl which could lead to some trouble.
For example:
If you were to build host-sdl and had alsa-lib enabled in your
packages list, it would try to build host-alsa-lib which does not
exists.
This patch define basic dependencies and conf opt for the host variant.
Reported-by: Eric Limpens <limpens@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The package infrastructure add automatically the "dirs" dependency so
remove it when the package infrastructure is being used.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated in the buildroot user manual add just a single space before
and after a '=' sign.
Break long lines.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command
lines, to make sure PATH is set correctly, and to line up with the qt5
packages that do this consistently.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
http://autobuild.buildroot.org/results/fc6/fc64896ca5c3b05dfe4b5c5e7d25fc4b6c9976ad/
and a bunch of similar failures.
When Lua package is selected, libubox sets an option to build with Lua
binding. Unfortunately, if LUAPATH is not passed libubox seeks it on
the host instead of staging due to hard coded pkg-config commands in
its CMake file. As a result Lua is not found and the build fails.
Fix it by passing LUAPATH in LIBUBOX_CONF_OPT.
Similarly, libubox seeks LUA_CFLAGS with the host's pkg-config for the
same reason. To prevent potential errors, fix it by passing LUA_CFLAGS
in LIBUBOX_CONF_OPT.
Finally, libubox fails to build with Lua 5.2 because it uses functions
removed from this version.
Fix it by activating the option only with Lua 5.1.
Signed-off-by: Hadrien Boutteville <hadrien.boutteville@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Append -lz to the cups linking libs to fix a problem like this one:
../cups/libcups.a(file.o): In function `cupsFileSeek':
/home/test/test/1/output/build/cups-1.3.11/cups/file.c:1444: undefined
reference to `inflateEnd'
collect2: error: ld returned 1 exit status
make[2]: *** [ipp] Error 1
make[2]: *** Waiting for unfinished jobs....
This solution is the same used upstream in newer versions.
Fixes:
http://autobuild.buildroot.net/results/f3d/f3d4f67ce7ee1d54f5bd4c87dfddb7417db614e5/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
XBMC is an award-winning free and open source (GPL) software media
player and entertainment hub for digital media.
We do provide a sub-option for each major feature we support, to avoid
letting the user hunt-down required libraries, since the dependency is
not always obvious and straightforward.
We also provide our own wrapper script, because the ones bundled in
XBMC are not suitable to all platforms. We need such a wrapper script
because XBMC exits with different exit codes, depending on how the user
quit XBMC: 0 is normal exit, 64 is for halt, and 66 is for reboot. So
we can't simply call the real XBMC binary from the startup script, or
we would lose this information. So, we provide a wrapper script that
takes appropriate action according to the above exit codes.
When run as root from a startup script, there is no HOME set, so XBMC
defaults to saving its configuration in /.xbmc (yes, at the root of the
rootfs). Since this does not play well with read-only filesystems (and
is inherently ugly anyway), and sicne there is no real clean way to tell
XBMC where to store its configuration, just provide a symlink to a better
place: /.xbmc -> /var/xbmc (note: the only location _guaranteed_ to be
writable is /tmp, but we want the configuration to survive a reboot. So,
/var/xbmc looks a better place than /var/run/xbmc. and the user will
have to take action to ensure /var/xbmc be writable.) (note: for this
reason, we do not want to set $HOME to /root either, even if it is root
running XBMC.)
Some of XBMC sub-options select libraries that depend on toolchain options,
such as IPv6. But those are already covered, being also implicit
dependencies of XBMC, as XBMC can only be used on an (e)glibc toolchain
anyway. When^WIf XBMC is one day buildable under uClibc/musl, this will be
time to revisit those dependencies.
This package was originally found at : https://github.com/huceke/buildroot-rbp
By gimli <ebsi4711@gmail.com>
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: gimli <ebsi4711@gmail.com>
Cc: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
beecrypt used to pull in icu automatically when C++ support was enabled,
but since icu is pretty large and slow, that automatic dependency was
removed. However, it is not obvious to the user that he should enable
icu in order to get C++ support in beecrypt. Therefore, make the C++
support a user visible config option and mention icu in the help text.
It would also be possible to automatically enable C++ support if icu
happens to be selected for another reason, but that doesn't really seem
to offer an advantage.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All of qt.mk's target installs ensure that their destinations exist,
except for /usr/lib. So do the same for /usr/lib, for consistency,
and in case some combination of custom fs skeleton plus dependency
on Qt leads to installing without a pre-existing /usr/lib directory.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command
lines, to make sure PATH is set correctly, and to line up with the qt5
packages that do this consistently.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch prepends TARGET_MAKE_ENV to $(MAKE) and $(QT_QMAKE) command
lines, to make sure PATH is set correctly, and to line up with the qt5
packages that do this consistently.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The qmake step of qt5 packages may attempt to run pkg-config. If qmake is
executed in an environment where the buildroot host directory is not in
PATH, pkg-config from the build machine may be used (/usr/bin/pkg-config).
This causes qt5 package compilation to fail on machines that do not have
pkg-config installed.
Refer to mailing list thread [1] for a specific error case.
This patch prepends TARGET_MAKE_ENV (which sets PATH) to the qmake call.
Reported-by: Marco Trapanese <marcotrapanese@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2014-March/092283.html
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Instead of automatically pulling in the (big) icu library if the toolchain
dependencies are available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes http://autobuild.buildroot.net/results/5a8/5a85e0e132f38a4a1a42c2b041f66003b64e748a/
(and a bunch of similar failures)
libubox has optional json-c handling, including the legacy version which
used libjson.so. Unfortunately this support is buggy, so we end up with the
wrong compiler flags, and more importantly it gets confused if libjson is
enabled, as that also provides a (incompatible) libjson.so.
Fix it by disabling the legacy handling.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#6986
Prior to u-boot 2013.10, the GPL license text was stored in COPYING and not
Licenses/gpl-2.0.txt, breaking legal-info.
Work around it by simply copying the file from the old location to the new
if present.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the ncurses package conditionally defines macros to install
the panel, form and menu libraries. This means we duplicate the install
step for each library type.
Rather than defining a set of macros, this change introduces a variable
for the set of installed libraries, $(NCURSES_LIBS-y). We use this in a
single macro to perform the library installation in one place.
Based on a change suggested by Thomas Petazzoni
<thomas.petazzoni@free-electrons.com>.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This ensures that the cache directory (and all of its ancestor
directories) exist. This is a nice thing to do because, if the parent
of the cache directory doesn't exist, then ccache will complain that
it cannot create the cache directory, causing the build to fail.
[Peter: drop BR2_CCACHE conditional, use POST_INSTALL hook]
Signed-off-by: Dan Moulding <dan.moulding@rackwareinc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add gcc snapshot versions dependency on host-flex and host-bison
(done as suggested by Thomas Petazzoni [1]).
Fixes gcc snapshot version 4.9-20140309 compile failure [2].
Tested the following buildroot configs
BR2_arm=y
BR2_cortex_a9=y
BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
BR2_BINUTILS_VERSION_2_24=y
BR2_GCC_VERSION_SNAP=y
BR2_GCC_SNAP_DATE="4.9-20140309"
and
BR2_arcle=y
For the ARC case disabled the BINUTILS_FROM_GIT host-flex and host-bison
dependency.
[1] http://lists.busybox.net/pipermail/buildroot/2014-March/092490.html
[2] http://lists.busybox.net/pipermail/buildroot/2014-March/092459.html
[Peter: simplify logic]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates the defconfig of the foundation-v8 platform, which
can be tested under the AArch64 emulator provided by ARM. The main
change is that we switch to the mainline 3.13.6 kernel instead of a
Linaro-specific Git tree.
Another change is to update the download link for the emulator in the
instructions, in order to use the latest version of the emulator,
which was used for testing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Like ARM ones, the Linaro AArch64 toolchains expect libraries in
/lib/aarch64-linux-gnu and /usr/lib/aarch64-linux-gnu, but Buildroot
always installs them in /lib and /usr/lib. Therefore, this commit adds
the appropriate symbolic links, just like we're already doing for
Linaro ARM toolchains.
Reported-by: Kevin Hilman <khilman@linaro.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit updates boot-wrapper-aarch64 to the latest version. As it
now uses the autotools, we switch the package to the autotools-package
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When configure.ac scripts do AC_CHECK_FILE tests, they always fail in
cross-compilation contexts because it is not possible to check for
file existence during the build process. Therefore we have to preseed
the configure environment with ac_cv_file_<foo>=yes variable, <foo>
being the path of the file, where all slashes, dots or dashes have
been replaced by underscores.
In the context of the boot-wrapper-aarch64, we will have to use three
of these variables, with fairly complex paths. So instead of
replicating the logic each time, we create a
AUTOCONF_AC_CHECK_FILE_VAL macro to help defining such variables.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch for the libgcrypt-config path correction was accepted by the
mainline for rsyslog. Updating the buildroot patch until a new version
with the fix is released.
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since <PKG>_VARIABLE_MINOR variable in some packages is used only once,
so it is unusable. This patch removes it.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds a menu option and updates the mtools.mk file to support
building mtools for the target.
[Peter: use same upstream URL as host variant]
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The --enable-xdf, --enable-vold, and --enable-new-vold options were
actually not being passed to ./configure since they were specified on
the wrong variable (MTOOLS_CONF_OPT vs. HOST_MTOOLS_CONF_OPT) and mtools
is a host-only package. Fixing the variable name so that the options are
actually used ends up causing the build to fail due to linker errors.
Since vold identifiers and OS/2 XDF support are unlikely to be used any
more, remove them completely.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previously specified tux.org URL did not appear to be maintained.
The gnu.org URL looks better maintained and is the same domain as the
actual tarball download.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No one is using this host-package, since we no longer have the
crosstool-NG toolchain backend.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version of eudev is synced with systemd 210 (notably gudev API
changes).
It comes with an upstream patch to fix a build error involving
<fcntl.h>.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps systemd to version 210. Systemd 209 introduced some majors
changes, which generated a lot of feedback and bugfixes. This lead to
version 210 a few days later.
Notable changes in 210:
- dropped dependency on libdbus in favor of internal sd-bus library.
- experimental support for kdbus.
- introduction of systemd-networkd, a simple network configuration manager.
- merge of libsystemd-*.so libraries into libsystemd.so.
- changes in Gudev API.
See NEWS file in the tarball for an exhaustive list.
Changes introduced by this bump:
- new configuration menu entry to enable systemd-networkd, which is an
alternative to ISC dhcp and dhcpcd.
- remove EFI patch for version 208.
- update of the getty unit patch.
- new patch to remove the *.service files accidentally shipped in the
official tarball (contain some invalid hardcoded paths) and force
their re-generation.
[Peter: add a note that dbus is only a runtime dependency now]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the migration of the toolchains to the generic package
infrastructure, it is no longer used.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump from rpi-3.10.32 to rpi-3.10.33:
- added support for extra GPIOs or Rev.2 boards (at last! ;-) )
- v4l2 fixes for high FPS
- audio fixes
Bump the kernel headers used for the toolchain at the same time (as
spotted by Cyrille.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Cyrille DERORY <cyrille.derory@derory.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bumping version of rsyslog and adding new dependencies of liblogging
and libestr. The first patch has be submitted to the upstream mailing
list and the second patch is a backport from the development branch of
the upstream.
[Peter: needs libuuid / host-pkgconf, fix comment]
Signed-off-by: Clayton Shotwell <clshotwe@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
network-manager can use modem-manager as a plug-in, so install
modem-manager development files to stating.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix typo in python-posix-ipc package name and rename
mobile_broadband_provider_info according to naming policy
Signed-off-by: Arnaud Aujon <arnaud@intelibre.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version bump comes with a patch, backported from v209, to fix
a linker error when EFI support is disabled.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop old custom CDROM devices from the device table, these are x86-only
and really really old so it would be amazing these would be in working
order.
And they haven't been supported in linux for while.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now a proper autotools package, almost... (configure not shipped)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also switch the homepage, it's not a proper one but at least it's no
longer a 404.
The license is now GPLv2+ but there's no COPYING file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As with other packages that use openssl and don't use pkg-config to
pick up the deps it fails to build for static scenarios.
So fix it by adding the zlib link option to LIBS.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TPACKET_V3 support issues fixed in 1.5.2/1.5.3 so the patch is no longer
necessary.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0021: Amplification in chrony control protocol
In the chrony control protocol some replies are significantly larger than
their requests, which allows an attacker to use it in an amplification
attack. With hosts allowed by cmdallow (only localhost by default) the
maximum amplification factor is 9.2. Hosts that are not allowed receive a
small reply with error status, which allows amplification of up to 1.5.
To fix the problem, the protocol has been modified to require padding in the
request packet, so replies are never larger than their requests. Also,
chronyd no longer sends replies with error status to hosts that are not
allowed by cmdallow.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-2284 but not CVE-2014-2285 so add a patch for that one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2014-0019.
Also rename patch according to policy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The list of changes is too long to repeat here, but lots of fixes
and improvements, plus a brand new rewrite of the DVB handling code.
Refresh patches, except patch 4 which has now been upstreamed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The firmwares to use for iwlwifi 3160/7260 are different, depending on which
version of the Linux kernel is being used:
- rev. 7 is for linux 3.10 through 3.12 (both included)
- rev. 8 is for linux 3.13 onward
Add a config choice to select the appropriate version.
(See cset a0a6eeb in the linux-firmware repository for the details.)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A bunch of new WiFi firmwares has been added, some have been updated.
Not limited to WiFi, but other firmwares are of less interest to
Buildroot for now (eg. radeon, myri10ge...).
Fixups in WHENCE file (the all-licenses file).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following vulnerabilities have been fixed.
* [1]wnpa-sec-2014-01
The NFS dissector could crash. Discovered by Moshe Kaplan.
([2]Bug 9672)
Versions affected: 1.10.0 to 1.10.5, 1.8.0 to 1.8.12
[3]CVE-2014-2281
* [4]wnpa-sec-2014-02
The M3UA dissector could crash. Discovered by Laurent
Butti. ([5]Bug 9699)
Versions affected: 1.10.0 to 1.10.5
[6]CVE-2014-2282
* [7]wnpa-sec-2014-03
The RLC dissector could crash. ([8]Bug 9730)
Versions affected: 1.10.0 to 1.10.5, 1.8.0 to 1.8.12
[9]CVE-2014-2283
* [10]wnpa-sec-2014-04
The MPEG file parser could overflow a buffer. Discovered by
Wesley Neelen. ([11]Bug 9843)
Versions affected: 1.10.0 to 1.10.5, 1.8.0 to 1.8.12
[12]CVE-2014-2299
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 2a5cf5e (check kernel headers version), we also need to
specify the series of the custom kernel headers version.
The defconfigs file that define such a custom kernel headers version
now fail to build.
Add the required _AT_LEAST_X_Y options to those config files. Done with
this (convoluted but very fast, uch faster ythan manual editing!) rule:
for f in $( git grep -l BR2_DEFAULT_KERNEL_VERSION=\"3 ); do
grep -E '^BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_' "${f}" >/dev/null && continue
sed -r -e '/^(BR2_DEFAULT_KERNEL_VERSION="3\.([[:digit:]]+).*")$/s//\1\nBR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_\2=y/' "${f}"
done
Only kernels >= 3.0 need those options in the defconfig, since the
default for 2.6.x kernels is correct (selects _AT_LEAST_2_6), and
the default is not saved in a defconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The incoming host-tzdump package requires the tzfile header,
so we isntall it.
[Thomas: remove mkdir -p, unneeded because of the use of install -D,
and change install to $(INSTALL), like we do in all other packages.]
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
[yann.morin.1998@free.fr: split zic header-install to its own cset]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tweak the configs to deal with b155f5a5ab
fallout.
And bump to the latest kernel versions.
As of this commit the microblaze qemu targets seem broken, probably
because of commit 14e527eb66 or some qemu
limitation.
SPARC seems to have issues as well, the kernel seems to go down with an
unhandled exception with qemu 1.7.0
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move ljsyscall install destination to /usr/share/lua/$(abiver}, to
match what the luarocks install would naturally do. This also
reflects the value of INSTALL_LMOD in the luajit.pc file.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Tested-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Similar to the "fs/initramfs: fix initramfs support" commit the same
problem applies to iso9660 in a different way. By adding iso9660 to
TARGETS it gets called before target-finalize with obvious consequences.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On commit a24877586a TARGETS_ROOTFS was
introduced, however fs/initramfs/initramfs.mk was never updated, hence a
show-targets would be rootfs-initramfs with rootfs-cpio afterwards hence
never rebuilding the kernel with a proper cpio archive since TARGETS is
always before rootfs-* as stated in the commit description.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On x86, the symbolic link ld-musl-<ARCH>.so.1 to libc.so must be
ld-musl-i386.so.1 in all cases, but $(ARCH) in Buildroot might be
i386, i486, i586, i686, etc. depending on the specific x86 variants
being selected.
This commit fixes that by creating a MUSL_ARCH variable set to i386 on
x86, and to $(ARCH) on other architectures.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The "dirs" dependency is redundant because now the "generic-package"
infrastructure add automatically the "dirs" dependency so just remove
the redundant references.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because now the toolchain dependency is automatically added by the
package infrastructure the BASE_TARGETS variable is useless so just
remove it.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because mmu dependency was not propagated move it to
BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS to automatically propagate it.
It can ben moved to BR2_PACKAGE_WEBKIT_ARCH_SUPPORTS because like
target architecture dependencies it doesn't modify the comment string.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the commit message template provided in the manual.
The new template emphasizes the importance of providing a description of the
problem, the root cause, and the solution, and the fact that all this should
be wrapped at 72 characters.
Suggested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the manual states that if you send a series and include a
changelog in the introduction mail (0 of x), it is not necessary to include
a changelog on the individual patches.
This is not always convenient: for large patch series it requires going back
to the introduction mail when opening each patch, to understand what
changed.
This patch rewords the paragraph accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the section about patch reviews and the
Tested-by/Reviewed-by/Acked-by tags upwards. Additionally, the first
paragraph is removed and replaced by another one. There are no other changes
in the text.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gst1-plugins-bad source code does include the old-style global opencv
header "opencv/cv.h", which includes headers from the core, imgproc,
video, features2d, flann, calib3d, objdetect and legacy modules.
However, the legacy module, in addition to headers from some of the
previously listed modules, also includes headers from the ml module.
Thus, the ml module must be selected to be able to build the legacy
one, so the gst-plugins-bad's opencv plugin.
Fixes:
http://autobuild.buildroot.net/results/d02/d02e1843ef90f4b40c99e3b23eddf376f827d46e/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
During installation, host-python and host-python3 run the freshly built
python executable. This is done with a proper LD_LIBRARY_PATH to make
sure it picks up the libpython in the build directory. However, the
python binary has an RPATH pointing to the $(HOST_DIR)/usr/lib.
Therefore, if libpython exists there, it will be used instead.
If the install step is run in parallel, it is possible that libpython
is already partially copied to $(HOST_DIR)/usr/lib when python is run.
This gives an error like:
python: error while loading shared libraries: $(HOST_DIR)/usr/lib/libpython3.4m.so.1.0: file too short
The fix is simple: use RUNPATH instead of RPATH, which allows
LD_LIBRARY_PATH to override RUNPATH. That way, the libpython in the
build directory is always used. RUNPATH is enabled by passing
--enable-new-dtags to the linker.
Fixes e.g.
http://autobuild.buildroot.net/results/2a6/2a62de3247ba5ad273f03d01e690a3eeb11aa7b4
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch expands the introduction of the "Contributing to buildroot"
section. In general, the intention of this and subsequent patches is to
promote non-feature contributions, like autobuild fixes, bug report
analysis, TODO list work, etc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Changes snmp++v3.3.4:
- Fixed: Incorrect time values conversion in += and -= operators of the
msec class in msec.cpp.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The x86_64 answer cache file from commit
d191d40e3f was intended for a previous
draft version of the samba4 package that resided in a different
directory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The CS PPC 2011.3 and 2010.9 toolchains have a bad linux/socket.h header
that doesn't define sa_family_t which is used by linux/netlink.h (and
libnftnl).
Patching external toolchain headers wouldn't be too nice and they seem
to be the only CS toolchains affected.
It's definitely NOT a kernel header version issue, the toolchain is
based on 2.6.38 headers and vanilla 2.6.38 has the proper definitions in
place. Fixes:
http://autobuild.buildroot.net/results/1e2/1e2cac84f0faa9b8915a628260ef41765d86e174/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
WPS NFC support wouldn't build properly unless AP mode was enabled.
Add upstream fix to correct this and enable NFC support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
wpa_supplicant doesn't use pkg-config and upstream likely wouldn't take
a patch to do so (hostapd/wpa_supplicant are used in android builds, and
it doesn't use any auto* stuff either) so pass it in LIBS* since we
always build openssl with libz support.
Made ugly by the fact that wpa_supplicant uses LIBS for the
wpa_supplicant binary, LIBS_c for the wpa_cli binary and LIBS_p for the
wpa_passphrase binary.
Also do f62a1d887a here too since it
applies when libnl is used.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A rebase of Samuel Martin's http://patchwork.ozlabs.org/patch/312320/
hostapd doesn't use pkg-config and upstream likely wouldn't take a patch
to do so (hostapd/wpa_supplicant are used in android builds, and it
doesn't use any auto* stuff either) so pass it in LIBS since we
always build openssl with libz support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit c28a28eed1. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit ca80782f45. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit b4cacbf5b1. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 477c28cf1d. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 4ad1ea59a5. The
whole host-lzop optional dependency logic cannot work, since the
configuration file will only be known after the kernel sources are
extracted, if an internal kernel defconfig is used, which is quite
common.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The usual --{en,dis}able-debug passed by the infrastructure are not
recognised by mysql's ./configure, as it uses unusual options.
Also, debugging is only meaningful to the server, not the client.
Signed-off-by: Marcelo Gutierrez (UTN/FRH) <kuyurix@gmail.com>
[yann.morin.1998@free.fr: actually add the options, move in server if-block]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The KCONFIG_GET_OPT calls added by
ca80782f45 ('linux: only depend on
host-lzop if needed') are made even if the kernel package is not
selected. This hangs the linux.mk parsing as they try to read from a
file that doesn't exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no reason to always depend on host-lzop, even when the kernel
compression is not LZO.
Since LZO is not the default compression option in the kernel (and there
is not sign that will change in the foreseeable future), it will always
appear in a config file, whether it is a complete config file or it is
only a defconfig.
So, only depend on host-lzop if the LZO compression is enabled in the
kernel config file (either the defconfig or the custom config file).
This includes:
- kernel compression itself
- initrd compression
- initramfs compression
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We so far have no mean to get the value from a Kconfig option from the
.config file of a package (eg. linux, busybox...).
Add a new function that returns the unmangled value of an option.
It expect two arguments:
- the Kconfig option name (complete, with leading CONFIG if necessary)
- the .config file to get it from
Note that, if the Kconfig option is a string, the returned value will
contain the leading and trailing double-quotes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A new menu and logo for the website, also some of the contents has been
reworked.
This patch also removes files that are no longer used, like the old
stylesheet and a few pages. The content of theses pages has mostly been
merged in other pages or was redudant with the manual.
[Thomas: integrate a few typo fixes noticed by Thomas De
Schampheleire]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add some specific Javascript to display commit and mailing recent
entries. Note that the git commit mail are ignored. Also load Google
Analytics.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the DOWNLOAD helper accepts one or two arguments:
- the source URI
- the source filename; if missing, it is derived from the URI
But we have no caller of DOWNLOAD that passes a second argument.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Rework .config file editing as was done for wpa_supplicant and bump to
version 2.1 which includes 802.11ac and ACS support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now with 802.11ac and P2P support.
CONFIG_LIBNL32 was a hidden option so switch to ENABLE/DISABLE now.
CONFIG_DRIVER_ATMEL was dropped.
CONFIG_DELAYED_MIC is no longer optional.
CONFIG_AP was also hidden so also switch to ENABLE/DISABLE.
CONFIG_EAP_* now blindly enabled instead of doing one per each.
P2P support is unified with the AP mode config knob since it's the more
likely scenario and share code between them.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to first enable and then disable.
Otherwise a wildcard enable can't have a single option disabled which is
far more usual than the opposite (and required for a simple bump to
version 2.1).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit fixes the init script to use the correct
FOO_INSTALL_INIT_SYSV hook.
[Thomas: slightly reword commit log.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dmraid rc15 does not support later Intel Software RAID (isw) chipsets
correctly. Updating dmraid to a later edition fixes this issue.
Also cleanup and remove now useless patches.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Antony Vennard <arv@vx9.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to use a newer dmraid, the lvm2 package needs
to be compiled with --enable-cmdlib --enable-dmeventd, which
dmraid can then invoke on boot.
[Thomas: slightly reformat the list of configure options.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Antony Vennard <arv@vx9.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch updates the manual with more clarified descriptions of tags
Tested-by, Reviewed-by, and Acked-by, as discussed on the Buildroot
developer days in February 2014.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Samba 4.1.x uses the waf build system which isn't very cross-compile
friendly, and also some tests are formulated in a way that isn't
cross-build friendly either by needing to run them.
For this reason the samba4 build system includes a way to define
answers for many of the tests, but this support isn't complete
and some tests still want to be executed.
Samba 4.1.x also requires a proper answers file for each architecture,
and at the moment i've only tested for ARM and PowerPC so only those
architectures are supported to begin with. To add support for another
architecture basically copy one of the cache files to the proper name,
enable it in Config.in and adjust endianess and all of the "size of"
answers. I'm in the process of automating the sizeof and endianess
answers within the samba build system to make them cross friendly
to simplify the answers file to just one generic linux variant.
The 3.6.x branch is still security supported for the forseeable future.
I'm currently working with samba upstream to solve many of these
issues but this will probably happen with the yet unreleased
4.2 branch only.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
host-heimdal is required for samba 4.1.x since it can't (yet) link
with an external heimdal implementation and can't cross-compile the
internal tools.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The original version uses sysconfig from the python interpreter
(normally host-python) which isn't really suited to provide information
of the target python.
Use the pure shell preprocessed backport from the upcoming python 3.4
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit introduces initial support for the Arrow SoCkit
boards, featuring an Altera Cyclone V SoC:
http://www.altera.com/b/arrow-sockit.html
It is based on Roman Diouskine's work at
https://github.com/rndi/buildroot-alt.
The kernel and the u-boot used is the one developped by the
rocketboards.org community, as mainline support is not fully
available yet.
More info is available in the board/altera/sockit/readme.txt file.
[Thomas: remove a number of not really needed empty new lines in the
readme.txt file, update the defconfig for the new kernel headers
options.]
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using this defconfig
BR2_x86_pentium_mmx=y
BR2_ENABLE_DEBUG=y
BR2_OPTIMIZE_2=y
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
# BR2_UCLIBC_INSTALL_UTILS is not set
BR2_BINUTILS_VERSION_2_23_2=y
BR2_GCC_VERSION_4_8_X=y
BR2_PACKAGE_LIBDRM=y
BR2_PACKAGE_LIBDRM_RADEON=y
BR2_PACKAGE_LIBDRM_NOUVEAU=y
BR2_PACKAGE_LIBDRM_VMWGFX=y
libdrm (w/o Intel API) compiles without BR2_PACKAGE_LIBATOMIC_OPS and without
BR2_PACKAGE_XLIB_LIBPCIACCESS, so USE_WCHAR, TOOLCHAIN_HAS_THREADS and
!BR2_PREFER_STATIC_LIB, previously added by the Xorg dependency, do not seem
to be necessary for libdrm at all.
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
All packages using the luarocks infrastructure need a dependency on
luainterpreter, because having the Lua interpreter for the target is
needed to built native Lua modules. This dependency is already taken
care of in pkg-luarocks.mk.
However, host-luarocks, which is built as a dependency of the extract
step of any luarocks package, also had a dependency on
luainterpreter. Not only this was not necessary, but it was causing
problems with 'make legal-info'. Since 'make legal-info' triggers the
extraction of all packages, as soon as a luarocks package was enabled,
it would trigger the build of host-luarocks, itself triggering the
build of luainterpreter and therefore its dependencies, amongst which
the entire cross-compilation toolchain.
[Thomas: reword commit log to include more detailed explanations.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The host variant is in preparation for possibly some gnu packages
shipping tar.lz versions only.
At least ed 1.10 did it (still needed to add extraction support for it).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ensure the kernel headers version used in the custom external toolchain,
or the manually-specified kernel headers version, matches exactly the one
selected by the user.
We do not care about the patch-level, since headers are not supposed to
change between patchlevels. This applies only to kernels >= 3.0, but
those are actually the ones we do care about; we treat all 2.6.x kernels
as being a single version, since we do not support any 2.6 kernels for
packages with kernel-dependant features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select the appropriate BR2_TOOLCHAIN_HEADERS_AT_LEAST_XXX options for the
internal toolchain backend.
For the manualy-specified version, we bring up the choice that sets the
_AT_LEAST_XXX symbols.
[Thomas: rename symbols from BR2_PACKAGE_HOST_LINUX_HEADERS_<version>
to BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_<version> to clearly indicate
that they are used to specify the version of custom headers.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Select the appropriate BR2_TOOLCHAIN_HEADERS_AT_LEAST_XXX options for the
external, custom toolchain backend.
We try to be conservative here, and default to kernel headers 2.6.x.
[Thomas: remove duplicated depends on BR2_TOOLCHAIN_EXTERNAL_CUSTOM,
since the choice is already inside a if BR2_TOOLCHAIN_EXTERNAL_CUSTOM
... endif block.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We now have quite a few packages that depend on the kernel headers to be
at least a certain version. For example, dvb-apps requires at least the
3.3 kernel headers.
Add a set of options that packages can depend on, to check that the kernel
headers match their required version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: explicitly mention that lpeg is a run-time dependency, and
simplify the version specification. Both comments were made by
Arnout.]
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It needs AM_PATH_LIBGCRYPT and will bail out if ALL_EXTRAS (libgcrypt)
isn't around - and it doesn't seem to be used at all.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
VLC defines two autoconf functions which are also defined by our own
pkg.m4 from pkgconf. Unfortunately, they are defined in a different way:
VLC adds --enable- options, but pkg.m4 adds --with- options. To make
sure we use VLC's definition, rename these two functions from
PKG_WITH_MODULES to VLC_PKG_WITH_MODULES and from PKG_HAVE_WITH_MODULES
to VLC_PKG_HAVE_WITH_MODULES.
Note that the second function (PKG_HAVE_WITH_MODULES) is in fact
defined in exactly the same way by VLC and pkgconf, but this might no
longer be the case when either pkgconf or VLC is updated. Therefore,
that one is renamed as well.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Simon Dawson <spdawson@gmail.com>
Tested-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 020047730b.
The change of configuration option from --{enable,disable}-* to
--{with,without} was made because we autoreconf vlc, but some vlc m4
functions are overriden by functions coming from our pkg.m4. An
upcoming patch from Arnout fixes the problem in a better way by
renaming the problematic macro so that they have a different name
between their vlc specific variants and the pkg.m4 variants.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
A confusion was made when applying commit
c3d539b53f ('host python/python3:
conditionally disable unicodedata') and then commit
73293e88c8 ('python, python3: enable
unicodedata for host-python, needed by setuptools').
The first commit added the enabling of unicodedata in the host Python
when the target Python is configured with unicodedata, which is
necessary because building the target unicodedata Python module
requires having unicodedata support in the host Python.
The second commit enabled the unicodedata unconditionally in the host
Python, because it is needed by host-setuptools.
However, when the second commit was applied, the logic that consisted
in disabling unicodedate in the host Python when not needed was kept,
which resulted in breaking the build of host-setuptools due to the
lack of unicodedata support in the host python.
This commit fixes that by only leaving the unconditional
--enable-unicodedata in the host Python configuration options, and
therefore removing the problematic conditional --disable-unicodedata.
Fixes:
http://autobuild.buildroot.org/results/b62/b622fc14776f5a6c26ff0d1fb882f4ae6cccc5d8/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The parallel build patch series has significantly reworked how some of
the core dependencies are expressed. We now have the following
dependencies:
all: world
world: target-post-image
target-post-image: $(TARGETS_ROOTFS)
with TARGETS_ROOTFS containing the list of root filesystem image
targets, each having the following dependencies:
$$(BINARIES_DIR)/rootfs.$(1): target-finalize $$(ROOTFS_$(2)_DEPENDENCIES)
The bottom line is that the "target-finalize" target, which in turns
ensures that all packages are built, is only triggered if at least one
filesystem image is enabled.
As we want to support builds with no filesystem image selected, this
is not acceptable. As a fix, we change the target-post-image target
to:
target-post-image: $(TARGETS_ROOTFS) target-finalize
This way, target-finalize will be triggered even if TARGETS_ROOTFS is
empty. This is still correct for parallel build, as the individual
root filesystem image targets still depend on target-finalize.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Fabio Porcedda <fabio.porcedda@gmail.com>
This reverts commit 7e50574965.
Now that we've bumped the libpng version, we shouldn't look for it among the
older releases.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes e.g.
http://autobuild.buildroot.net/results/9c7/9c7a97882d446a42cabcb07e4af7e6825192e70b
VLC cannot build static and shared libraries at the same time.
Also, live555 only has a static library, and VLC tries to link this into
a shared library. Therefore, disable the live555 plugin unless static
linking is selected. It would be better to build live555 as a shared
library, but that's for another patch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a large number of incorrect configure options for vlc.
Configure warnings reported by Arnout Vandecappelle, in his analysis of vlc
autobuild failures.
Notice that this change of configure options is caused by our AUTORECONF
picking up a different PKG_WITH_MODULES definition. If vlc is bumped in the
future and AUTORECONF is turned off, then this needs to be reverted.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libusb support is requested in pcsc-lite, the configure script will try
to link a test application to check libusb_init(). However, when libusb
needs threads, the linking step should link in threads as well.
The configure script, first tries to call libusb-config to determine the
necessary cflags and libraries (which should include the thread flags), but
this program does not exist, so the cflags/libs variables are empty.
Therefore, add a patch to explicitly add PTHREAD_CFLAGS and PTHREAD_LIBS to
the libusb test, so libusb is detected correctly.
Fixes
http://autobuild.buildroot.org/results/432/432be0db3f8415f6a026b69234579ad4d23b6421/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(external) nios2 toolchain is currently missing the fallocate64 system
call. Because of compiling the e2fsprogs package with _FILE_OFFSET_BITS=64,
_LARGEFILE_SOURCE and _LARGEFILE64_SOURCE the fallocate call is replaced
by fallocate64 by the glibc. Therefore fallocate is entirely disabled while
configuring the package.
Fixes http://autobuild.buildroot.org/results/70a/70a47bd7392560cbc1c64769c8357c0b4c91ca3b/
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
e4defrag has to be disabled because of the (external) toolchain declares
the fallocate64 call in the header files but don't implement it in the
library. e4defrag defines its own fallocate64 function that throws an
error because of the previous declaration in the toolchain header.
Signed-off-by: Frank Bergmann <frank@frajasalo.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc build scripts use wrong variable name to specify xtensa overlay
application command. As a result gcc is built with the default overlay,
which leads to obscure failures later in the build process.
xtensa toolchain needs an additional configuration for a specific core
variant we're building for. This configuration is called 'overlay' and
is an archive with files for binutils, gcc and gdb that replace
corresponding files in toolchain components.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-libxml2 package does not depend on zlib or lzma, but may
detect versions available on the host. This can cause problems in the
following situation:
1 host-libxml2 is built, finds an available lzma library in the
system, enables lzma support by using it.
2 host-xz is built, which installs a different version of the lzma
library into $(HOST_DIR)
3 host-libxslt is built, tries to link against libxml2, which fails
because now the visible lzma library is the one from
$(HOST_DIR)/usr/lib and no longer the one libxml2 was built agains.
To fix this, this patch passes --without-zlib and --without-lzma to
the host package.
In addition, since the target variant of libxml2 does not have
provisions to depend on the target lzma, we also pass --without-lzma
for the target variant. The case of zlib for the target was already
properly taken into account.
Fixes:
http://autobuild.buildroot.org/results/6dc/6dcef647eb0f0db7de3f34194eb15ceebc645b39/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To install its shared library, the luajit Makefile does:
cd src && test -f $(FILE_SO) && \
$(INSTALL_X) $(FILE_SO) $(INSTALL_DYN) && \
$(LDCONFIG) $(INSTALL_LIB) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT1) && \
$(SYMLINK) $(INSTALL_SONAME) $(INSTALL_SHORT2) || :
This means that if ldconfig doesn't work or isn't available on the
system, it won't create the libluajit-5.1.so -> libluajit-5.1.so.5.2.0
symbolic link.
Not having this symbolic link prevents lua-ev from finding the shared
version of the luajit library, and it fallbacks to using the
libluajit.a static library. However, this static library is not built
with -fPIC, so using it within a shared library doesn't work, and
leads to build failures on architectures that really do want to have
non-fPIC code into a shared library, such as x86-64.
By passing LDCONFIG=true during the installation steps of luajit, we
ensure that the symbolic links are created, which allows lua-ev to
detect the shared library properly, making everybody happy.
Investigation conducted with Samuel Martin. Thanks!
Fixes:
http://autobuild.buildroot.org/results/41c/41c8bb9cf91a86908a150dae27726136cb56f5b7/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default $(PKG)_AUTORECONF_OPT already includes the -i and -f flags,
so there is no point in specifying these in the package makefile. Further,
the -v option to autoreconf is not required.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default $(PKG)_AUTORECONF_OPT already includes the -i flag,
so there is no point in specifying this in the package makefile.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default $(PKG)_AUTORECONF_OPT already includes the -i and -f flags,
so there is no point in specifying these in the package makefile.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ti-gfx uses custom extract commands, which first and foremost removes
the source dir unconditionally.
Thee side-effect of this is that make will re-extract, re-patch and
probably re-build ti-gfx at each run.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a sequence number to the newclkapi patch.
Rebase it ontop of the 5.01.00.01 release.
Note: this is barely tested. It applies neatly, but I can't test it,
since I do not have the hardware. I bumped the patch by basically
renaming the problematic functions like the previous patch did:
s/clk_enable/clk_prepare_enable/
s/clk_disable/clk_disable_unprepare/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
this config prevents the introduction of some HOST_DIR paths on target
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
since the comeback of version in module path (see commit ccd68a51)
the upstream Makefiles are usable for install.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A bug has been reported upstream to fix this issue properly, and a
GStreamer developer agreed with our proposal. We add the bug URL to
comments on Config.in to let the interested users follow the progress of
this issue.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We've seen autobuilder failures for vlc on many platforms and we don't
know how to solve them. It is also currently orphaned, i.e. there is
nobody who is actively using the package and maintaining it in
buildroot.
We could mark the package as BROKEN, but that would make it completely
invisible for the users and the autobuilders, which would not help its
orphan-ness. Therefore, instead, add a big fat warning in the config
menus that it has known issues.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When I saw this patch it took me a while to figure out how/why it worked,
so let's make life easier for the eventual version bumper to understand
what's going on here.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of dependency check for virtual package <foo>
defines FOO_CONFIGURE_CMDS to print an error message if the
dependencies are not met.
This patch updates all the virtual packages to use the GNU Make control
function $(error text...) instead.
This makes the error happen at the beginning of the build, with a clearer
message.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When systemd is chosen as init system, the required kernel features are
enabled.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The udev virtual package and its current providers (eudev and systemd)
have been updated to use the latest version of virtual package
infrastructure.
A provider should now select BR2_PACKAGE_HAS_UDEV and well as set a
value for BR2_PACKAGE_PROVIDES_UDEV.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do all substitutions on the .config file in a single sed command.
Make the .config file editing a lot more readable. Based on ideas
brought up by Arnout Vandecappelle on the mailing-list.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(build-test with all features enabled)
[Samuel: rebase on head of master]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This also fixes the download URL as oudated versions have been
moved to the "older-releases" sub-folder.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2013-6466.
openswan-wno-error-cpp.patch is no longer required since it's now
conditional on a check for a modern enough compiler.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 0.8 version hasn't seen any updates since 2005, and there's no real
reason to continue to use it today, so deprecate it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes runtime failure of gst-fsl-plugins, e.g.
(gst-plugin-scanner:1700): GStreamer-WARNING **: Failed to load
plugin '/usr/lib/gstreamer-0.10/libmfw_vpu.so':
/usr/lib/libgstfsl-0.10.so.0: undefined symbol: shm_open)
when compiled with buildroot/glibc toolchain.
See also old buildroot mailing list request [1].
[1] http://lists.busybox.net/pipermail/buildroot/2013-June/073910.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the GRAPH_OUT and GRAPH_ALT variables according to our
recently-agreed naming scheme for user-facing variables:
- GRAPH_OUT -> BR2_GRAPH_OUT
- GRAPH_ALT -> BR2_GRAPH_ALT
The documentation part of the rename is handled by Thomas as
part of his manual fixing spree. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/libtool/libtool-0001-mips64-n64-linking.patch touches an m4
file, so applying it triggers a run of autoconf, automake, etc. This
sometimes leads to build failures due to incompatible system autotools.
This was observed on Fedora 10, which has automake 1.11 while the
generated files that are included in the tarball require automake
1.11.1.
We cannot simply set HOST_LIBTOOL_AUTORECONF = YES because that would
create a circular dependency on host-libtool. Therefore, the patch
patch is applied on the installed libtool.m4 instead of in the source
tree. Then, it also needs to be renamed to something that doesn't
match buildroot's patch convention so it doesn't get picked up
automatically.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_SCONESERVER_HTTP_SCONESITE_IMAGE option of sconeserver
selects imagemagick, but forgets to depends on BR2_USE_MMU, which
imagemagick depends on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A number of packages that select Pango (which depends on BR2_USE_MMU)
forget to also depends on BR2_USE_MMU. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch cairo-001-blackfin-build-fix.patch was added in commit
d372d0b677 ('cairo: add patch to fix
Blackfin build failure') to take into account the fact that Blackfin
has a non-empty USER_LABEL_PREFIX: C symbol 'foo' corresponds to
assembly symbol '_foo', contrary to most other architectures where
they are the same.
However, the patch was only fixing the relevant macros in
src/cairo-compiler-private.h and did not take into account the
duplicated version of these macros in
util/cairo-script/cairo-script-private.h. This commit fixes that.
This commit is fixing a build failure on Blackfin, for which there was
no recorded autobuilder result because this problem was hidden by the
problem fixed by the previous commit ('cairo: fix build on Blackfin in
test/cairo-test-runner.c').
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Perl packages depend on very recent versions of Module-Build
which are not yet shipped with a stable perl version.
But the cpan client is able to update Module-Build as pre-requirement.
On Buildroot, we must install the latest Module-Build.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though libxml-parser-perl had a Config.in file with an option to
enable it on the target, this option was hidden by a dependency on
BR2_HOST_ONLY. So in practice, it was not possible to enable
libxml-parser-perl on the target. This allows us to rename
libxml-parser-perl to perl-xml-parser to follow the new naming
convention of Perl packages, without having to introduce
Config.in.legacy material.
In addition to this rename, the package is converted to use the newly
introduced Perl package infrastructure.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ELDK now relies on Yocto, so it no longer has the funky
non-standard way of doing multilib. Also, we didn't mention that Yocto
toolchains/SDK are not suitable for usage with Buildroot. Therefore,
this commit rewords this part of the documentation to explain that
Yocto/OpenEmbedded SDKs cannot be used as external toolchains in
Buildroot, and why.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace ADI by Analog Devices, which is clearer for most people, and
remove the Xilinx external toolchains since we have deprecated them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have eglibc and glibc support in the internal backend, and
no longer marked as experimental, a little bit of rewording is
needed. It is no longer necessary to indicate that uClibc was
historically supported as the only C library, and that the glibc
support is experimental. We also update the rest of the description to
be less uClibc specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to tell people that they should remove stamp files: they
should use the make <pkg>-reconfigure and make <pkg>-rebuild make targets
instead. We still keep an explanation about stamp files, just to give the
user an insight on how Buildroot works internally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The conditional (suggested by me) introduced in 108952 (rt-tests: disable
for uclibc mips) isn't actually valid kconfig syntax, causing menuconfig to
error out.
Rewrite it to use proper syntax.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some architectures (eg. Arc, Cris, Hexagon, ia64, Parisc, Score and
Xtensa), the Linux buildsystem tries to call the cross-compiler when
installing the headers.
This is a spurious call, since a cross-compiler is not needed at all to
install the headers.
As some users have reported the issue, just add a comment in linux-headers.mk
directing the user to ignore those errors.
Reported-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To allow proper nesting of suboptions of a package, the suboptions should
come directly after the main option, and cannot be interleaved with a
comment.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The AM_PATH_ALSA macro in utils/alsa.m4 unconditionally uses -ldl. This
breaks compilation of alsa-utils (and probably other packages using this
macro) for targets that do not support dynamic loading, such as for
Blackfin FLAT binaries.
This patch updates the macro to check if dlopen is available, and use that
result to conditionally add -ldl to the list of libraries.
Fixes
http://autobuild.buildroot.org/results/de2/de286880973be956f6c504aa9a758171d6f49674/build-end.log
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a9baea4345 ('pixman: add patch
to fix Microblaze build failure'), a patch is added to the pixman
package to avoid using the FE_DIVBYZERO definition when it is not
available. However, it was using the have_fe_divbyzero variable to
define or not HAVE_FEDIVBYZERO, while the AC_CHECK_DECL autoconf macro
sets the ac_cv_have_decl_FE_DIVBYZERO variable.
The end result was that the FE_DIVBYZERO macro was considered as never
being available. This commit fixes that by using the appropriate
variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (actually, just oprofile) need to link against libiberty.
This option just installs libiberty.a so it has no effect on the target,
therefore it's not needed to add a config option for it.
Before binutils-2.24, there was a bug in libiberty/Makefile.in that
caused libiberty to be installed regardless of the
--enable-install-libiberty option. This problem wasn't noticed before
because binutils-2.24 is not selected on any of the autobuilders: the
version can only be selected if an internal toolchain is used, and it
defaults to 2.21.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Microblaze build of pixman was failing due to FE_DIVBYZERO not
being implemented. It turns out that the usage of it, like fenv.h and
feenableexcept() is optional. So the patch simply adds a configure
check and disables the appropriate code (which is only use in the
tests anyway).
This commit also renames the existing patch to follow the patch naming
convention, and get a reliable ordering when applying patches.
Fixes:
http://autobuild.buildroot.org/results/806/8064092cdbac85fbf4322429d29d5d11dc51860f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As our architecture support expands to a number of architectures that
do not implement NPTL threading, and the number of packages that
depend on NPTL specific features, it has become necessary to be able
to know whether the toolchain has NPTL support or not.
This commit adds a new BR2_TOOLCHAIN_HAS_THREADS_NPTL hidden Config.in
option that allows packages to know whether NPTL is available or not.
This hidden option is:
* Automatically enabled when glibc/eglibc or musl toolchains are
used, either internal or external.
* Automatically enabled when an internal uClibc toolchain with NPTL
support is configured. It is left disabled otherwise for internal
uClibc toolchains.
* Configured according to a visible Config.in option for custom
external uClibc toolchains.
[Peter: factor _EXTERNAL_HAS_THREADS in single if as suggested by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcgi always builds both the shared and static library, which doesn't
work on architecture that don't support shared library at all, such as
Blackfin with the FLAT format. libcgi uses autoconf, but not automake,
and the Makefile is not of the highest possible quality, so this
commit fixes the problem by introducing a "STATIC" variable that can
be set from the environment. When set to a non-empty value, the
Makefile assumes it should only build the static version of the
library.
Note that this package is in desperate need of some care: there is one
single patch that mixes several changes together, it doesn't have a
description or a Signed-off-by line, and there is now a github project
for libcgi at https://github.com/rafaelsteil/libcgi/ that has the same
fixes.
However, for the purpose of the master branch, we're doing the most
minimal fix possible, by just adding this STATIC variable.
Fixes:
http://autobuild.buildroot.net/results/625/625105bcaf26345f422b225787fc19611b65cd57/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable when using a uclibc version before 0.9.33 since dn_comp
function support was added in this version. Also disabling on AVR32
since any AVR32 toolchain will be based on a uclibc version older
than 0.9.33 (for using an external AVR32 toolchain).
[Peter: use dn_comp instead of __dn_comp]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for O=... has limitations, since it is interpreted
relative to the Buildroot tree, and thus may lead to unexpected results.
For example, running this:
make -C buildroot O=my-O
will not create my-O in the current working directory, but as a
sub-directory of the Buildroot tree, here in buildroot/my-O
Explain this in the manual (as is similarly done for BR2_EXTERNAL).
Also add a note that $(O) will be created if missing.
Also change O=.. and -C .. to O=<...> and -C <...> to make it explicit
this is an ellipse, not a relative path.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although it is possible to use relative paths, there are a few pitfalls
when doing so.
To avoid confusion for a (newcoming) user, use absolute paths in the
manual (as is done in examples for $(O)), since it is guaranteed to be
working without corner cases.
[Peter: s/relatively/relative/ as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for BR2_EXTERNAL, and using an external defconfig,
such as in (from a Buildroot top-dir):
make O=.. BR2_EXTERNAL=.. foo_defconfig
is broken. It is unclear why the %_defconfig rule recurses in that case.
This patch internaly makes BR2_EXTERNAL canonical (ie. makes it an absolute
path), and checks the directory exists.
[Peter: s/relatively/relative/ as suggested by Thomas]
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mpg123 needs MMU because the application that is built with this
package uses fork. Currently it is difficult to only build the
libraries for mpg123 so disabling the package all together when there
is no MMU support.
Note: mpg123 is an optional dependency of mpd but mpd already requires
BR2_USE_MMU so there is no need to add this as a dependency.
Fixes:
http://autobuild.buildroot.net/results/5b0/5b053af566dd122ae7e58893e77d5d5f3070fb9e
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 87492d244a ("aiccu: disable
for uClibc 0.9.31/0.9.32"), we made sure it was not possible to select
aiccu with uClibc 0.9.31 and 0.9.32, because they lack dn_skipname().
However, we still have the problem that external AVR32 toolchains can
select aiccu, which causes build failures. Therefore, we also disallow
aiccu on AVR32 altogether. We keep the 0.9.31/0.9.32 exclusions,
because if they are used on other architectures, it would also fail
due to the lack of dn_skipname().
Fixes:
http://autobuild.buildroot.org/results/a24/a2490d434152625d9208615d83f4c5d6daea79d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evas has an optional mechanism to do asynchronous preloading of
images. This mechanism is optional, and in commit
b6d92bf415 ("libevas: async image
preload support needs threads support in toolchain"), Peter made sure
to disable the asychronous preloading when no thread support was
available.
Unfortunately, it seems like disabling the asynchronous loading is
rarely used, and it in facts fails to build: a member of structure is
not present when asynchronous preloading is disabled, but the code
continues to use it.
Since the fix is not obvious, and all this mechanism seems to have
changed completely in EFL 1.8.x, and we probably don't care much about
EFL without threads, this commit adds a dependency of libevas on
thread support. Consequently, it also reverts commit
b6d92bf415 which is no longer necessary.
Of course, this commit propagates this additional dependency to the
reverse dependencies of libevas.
Fixes:
http://autobuild.buildroot.org/results/6de/6de90018a9eeb9c495d15046a8b3270eb95a5550//http://autobuild.buildroot.org/results/693/693df99db4ab357b48d427be3a72f6d64dd53065//
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current default for BR2_PACKAGE_OVERRIDE_FILE points to:
$(TOPDIR)/local.mk
This works well for in-tree builds, but is not very useful for
out-of-tree builds, when the Buildroot source tree may be shared for
different concurrent builds.
Also, it seems to be more sensible to have local.mk alognside
the .config file.
Hence, change the default for BR2_PACKAGE_OVERRIDE_FILE to point to:
$(CONFIG_DIR)/local.mk
Note that this does not change the current behaviour for in-tree
builds, since in that case $(CONFIG_DIR) == $(TOPDIR).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ramfs (which is used instead of tmpfs if CONFIG_SHMEM isn't enabled in the
kernel configuration), defaults to mode 0755 instead of 01777 like tmpfs
uses.
/tmp should be world writable and sticky, so explictly enforce the mode so
ramfs users gets it correct instead of relying on the defaults.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tvheadend configure script fails to correctly handle spaces in any of
the options passed to it. If ccache is used the configure script fails to
handle the space in the --cc option and errors. Also the --cflags option
fails to handle multiple entries and only uses the first one. This patch
simple removes setting the --cc and --cflags options as the configure
script will correctly use the CC and CFLAGS variables already passed in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Martin Bark <martin@barkynet.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
coreutils was not building in the static link case with uClibc, due to
binaries being linked with librt (for timer functions), but not with
libpthread. However, librt uses functions from libpthread, so both
must be specified. This lack of linking against libpthread was caused
by a deficiency in one of the gnulib m4 macro, for which we add a patch.
Fixes:
http://autobuild.buildroot.org/results/bd4/bd4cc779b46e3837e3d6c43c97eaf42fdfc3a288/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pv configure script is somewhat stupid: if it cannot find the host
gettext tool msgfmt, it concludes that gettext is not available, and
provides its own minimal version. Unfortunately, this minimal version
conflicts with the available target gettext. We fix this by ensuring
that host-gettext is built if gettext support is enabled, by adding it
to the dependencies.
Fixes:
http://autobuild.buildroot.org/results/d30/d30db79190f2cf8953751d55a5d34644f60daec4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AArch64 does not implement the SYS_open system call, but only the
SYS_openat system call, as should be done for all modern architectures
merged into the Linux kernel. This causes problems when building
libv4l 0.8.9, which are fixed by integrating an upstream patch,
available in a more recent version of libv4l. Backporting the patch is
preferred over bumping libv4l, as libv4l has a fairly large number of
reverse dependencies, and we don't want to break anything that close
to the release.
Note that this commit also renames the existing libv4l-largefile.patch
to libv4l-01-largefile.patch in order to comply with the Buildroot
patch naming scheme, and guarantee the order in which patches are
applied.
Fixes:
http://autobuild.buildroot.org/results/ed6/ed66792e332ee0256a17f98cbe21dfcfe6e8743b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 52eeb04c76 ('libsepol: fix
static-only library build') I forgot to git add the changes made to
the libsepol.mk file itself. Those changes are needed to actually pass
STATIC=<something> when building static libraries only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu does not recognize 'uclinux' as a supported platform. While making
it recognize uclinux is easy, there is another problem down the road:
icu does very weird things to generate an ELF library containing
static data (libicudata.a), and the generated library being ELF, it is
not compatible with the FLAT binary format expected by uclinux
platforms such as Blackfin in FLAT format.
Therefore, we simply disallow the selection of icu on FLAT
platforms.
Note that adding a dependency on BR2_BINFMT_ELF doesn't work, because
BR2_BINFMT_FDPIC is considered to be separate (even if technically
FDPIC is a derivative of ELF). That's why the dependency we're adding
is "depends on !BR2_BINFMT_FLAT" and not "depends on BR2_BINFMT_ELF".
Fixes:
http://autobuild.buildroot.org/results/b41/b415fed7fae4012bad7d8b53a481bd71bdab716f/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change BR2_HOST_NEEDS_JAVA to BR2_NEEDS_HOST_JAVA as it makes more
sense.
The host doesn't need Java but Buildroot needs the host to have
Java in order to build the package that select this option.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of issues. From the changelog:
- Avoid getting stuck in a loop writing huge key files, reported by Bruno
Thomsen
- Avoid crash on exit due to cleaned up keys before last packets are sent,
debugged by Ronald Wahl
- Fix a race condition in rekeying where Dropbear would exit if it received a
still-in-flight packet after initiating rekeying. Reported by Oliver Metz.
This is a longstanding bug but is triggered more easily since 2013.57
- Ensure that generated RSA keys are always exactly the length
requested. Previously Dropbear always generated N+16 or N+15 bit keys.
Thanks to Unit 193
- Fix DROPBEAR_CLI_IMMEDIATE_AUTH mode which saves a network round trip if the
first public key succeeds. Still not enabled by default, needs more
compatibility testing with other implementations.
- Fix signal handlers so that errno is saved, thanks to Erik Ahlén for a patch
and Mark Wickham for independently spotting the same problem.
And at the same time get rid of the TIMEVAL_TO_TIMESPEC as dropbear provides a
fallback implementation if not available (and has done so since 2006).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.3.8 support is removed since 334dca61 (kernel-headers: remove deprecated
versions 3.1, 3.3, 3.5), so let's get rid of the patch as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
XBMC needs Java on the host in order to build, because it uses a
code-generator which is built in two phases: In the first phase SWIG is used
to parse C++ header files that define the API. SWIG outputs an XML file
that contains a complete description of the structure of the API. In the
second phase, the XML file is ingested by a Groovy (Java) program that then
creates C++ code that forms the bridge to the scripting language (Python).
The second phase is why we need java on the host.
You can learn more at the XBMC's wiki:
http://wiki.xbmc.org/index.php?title=Codegeneration#How_it_works
In order to check that, this patch introduce this mechanism in
dependencies.sh, and it also defines the variable in Config.in
[Peter: fix error message]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are going to bump setuptools to a much newer version, the host
python needs to be built with support for unicodedata.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, Python external modules were only visible when Python 2.x
was selected. With this commit, we now source all the Config.in files
of Python external modules, as soon as one of the two Python
interpreters is enabled.
Since all Python external modules have a "depends on
BR2_PACKAGE_PYTHON" in their Config.in, this commit in practice does
not allow to enable any Python external module. However, thanks to
this, we can progressively and safely enable more and more Python
external modules to build with Python 3, by simply changing their
dependency to "depends on BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit improves the Python package infrastructure to allow Python
packages to be built with Python 3. The changes are fairly simple:
* Use either PYTHON_PATH or PYTHON3_PATH as the PYTHONPATH depending
on which Python is used.
* Depend on host-python or host-python3 and python or python3
depending on which Python is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Python package infrastructure will need the Python 3 package to
provide a PYTHON3_PATH environment variable in order to build
third-party Python modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps the Python3 package to use Python 3.4.0rc1.
About the patches:
* The patches below 100 are significantly changed, because like for
Python 2.x, a good number of improvements have been made in the
upstream Python for cross-compilation. Therefore, almost all of
these patches have been modified.
* All the patches above 100 are simply updated for Python 3.4.0, with
a small refactoring for the handling of test modules.
The details of the python3.mk changes are:
* --without-ensurepip to tell Python to not use PIP at build time.
* Many environment variables are no longer passed, they were specific
to our cross-compilation patches
* The fixup of the LIBDIR in the Python Makefile is no longer needed
since Python has switched to _sysconfigdata.py for distutils
configuration instead of parsing the Makefile.
* A new post patch hooks touches the two files generated by pgen to
make sure they are newer than the pgen sources, which ensures pgen
is not built/executed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some parts of python3.mk were hardcoding the 3.3 version as the major
version, which does not work for Python 3.4 and other future
versions. Instead, use the existing PYTHON3_VERSION_MAJOR.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The target python3 depends on host-python3, but most of the scripts
call "python", so we need to ensure that $(HOST_DIR)/usr/bin/python
exists. This patch achieves this by creating a python -> python3
symbolic link in $(HOST_DIR), just like we are already doing for the
target Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the previous commit that makes distutilscross unecessary for
setuptools packages, the host-distutilscross package can now be
removed. There is no need for any Config.in.legacy handling, since
there is no target variant, or visible Config.in option for
host-distutilscross.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the bump of Python 2.x, distutilscross is no longer needed
to achieve cross-compilation for setuptools packages. The host Python
2.x interpreter can be tricked into using the target compiler thanks
to pointing it to a different sysconfigdata module, which is achieved
using PYTHON_PATH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Transmission would incorrectly determine the C++ compiler when ccache is
enabled, causing a build with uTP to fail at the configure step.
This patch adds a patch against transmission, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_PACKAGE_QT_STATIC is set, qtuio will not build a .so file, but .a.
However, the custom INSTALL_TARGET_CMDS and INSTALL_STAGING_CMDS
unconditionally attempted to copy the .so file.
This commit checks the requested Qt library type and copies the right
library for each case, taking into account that the static .a file does not
need to be copied to the target directory.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The devicetree data for BeagleBone Black is the am335x–boneblack.dts file
(includes "am33xx.dtsi" and "am335x-bone-common.dtsi")
BeagleBone White uses the am335x-bone.dts file.
Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If Lua support is requested in VLC, its configure script tries to find the
luac byte compiler, which fails if host-lua is not yet built.
This can be easily reproduced by setting a minimal config with vlc and Lua
enabled, and running: 'make clean toolchain vlc'. Final output is:
checking for LUA... no
configure: WARNING: Package lua5.2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.2.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.2' found, trying lua 5.1 instead
checking for LUA... no
configure: WARNING: Package lua5.1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.1' found, trying lua >= 5.1 instead
checking for LUA... yes
checking for luac... no
configure: error: Could not find the LUA byte compiler.
make: *** [<buildroot>/output/build/vlc-2.1.2/.stamp_configured] Error 1
Fix this problem by setting host-lua as a dependency to vlc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It does not make much sense enabling opencv without its core module.
This configuration leads to build nothing (since all modules depend on
the core one), but install the configuration files (*.pc and *.cmake)
anyway.
This absurd situation may break the build-system of other packages
that would correctly find the *.pc (but does not check for the modules
they actually use), but would not build because of missing headers and
libraries.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jimtcl tries to use 'ccache' (a non-buildroot host version) which may not
exist on the host system. If ccache is enabled in buildroot, the compiler
used by jimtcl is:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
If ccache is not present on the host, this results in the build error:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
-D_GNU_SOURCE -Wall -I. -fpic -pipe -Os -c -o jim-subcmd.o jim-subcmd.c
make[1]: ccache: Command not found
This patch passes 'CCACHE=none' to the 'configure' script, disabling the
internal handling of ccache, so that ccache can be transparently passed
through CC.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The expanded SED variable already contains -e, so the extra -e was being
interpreted as the sed command and causing sed to fail.
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The main Buildroot Makefile was removing *.py or *.pyc if Python 2 was
enabled, but for Python 3, this action was taken care of by a post
install target hook of python3.mk, which means it wouldn't work with
external modules (the .py/.pyc removal would be done before external
Python modules are installed).
We fix this by making the global *.py/*.pyc removal in the main
Makefile work for both Python 2 and Python 3.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the Python 2.x bump, it is no longer needed to pass
PYTHONCPREFIX, and CROSS_COMPILING when building third-party Python
modules.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though jumping from 2.7.3 to 2.7.6 looks like a minor version
bump, it is in fact a fairly significant one, because a good number of
changes to help cross-compilation have been merged into Python
upstream. Therefore, most of our patches are affected by this change.
In detail, this commit:
* Renames all the patches to follow the naming convention of patches
in Buildroot: the patch file names should not have any version
number.
* The patches numbered above 100, that add configuration options to
disable certain modules of the Python standard library, are only
renamed and slightly adapted, they didn't change that much.
* The patches numbered below 100 are almost entirely rewritten: many
of the cross-compilation problems that used to exist in Python
2.7.3 no longer exist, and the number of remaining problems is
smaller, and can be fixed with smaller patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With the upcoming bump of Python 2.x, it will become important that
the PYTHONPATH is passed whenever we build third-party packages, be
they using the distutils build mechanism, or the setuptools build
mechanism. This is because passing PYTHONPATH is what will allow
Python to find a special Python module that contains all the
compiler/library/headers definitions that are relevant when
cross-compiling.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that the Python package exposes its PYTHON_PATH variable, we can
use it in the package infrastructure. This prepares both the upcoming
bump of Python 2.x, and the introduction of Python 3 support in the
Python package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As a preparation to make the Python infrastructure support both Python
and Python 3, as well as the bump of Python 2 and 3, we need the
Python package to expose the Python module path in a variable called
PYTHON_PATH. It will be used by the following commits.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
In a previous patch, the situation was already fixed for busybox. This patch
applies the same fix to uclibc: copy the config file from the configure
step, as linux is doing.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
For example, when setting a BUSYBOX_OVERRIDE_SRCDIR to a cleanly extracted
busybox tarball:
$ make busybox-dirclean busybox
rm -Rf [..]/output/build/busybox-custom
>>> busybox custom Syncing from source dir
>>> /home/tdescham/repo/contrib/busybox-1.21.1
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr
--exclude CVS /home/tdescham/repo/contrib/busybox-1.21.1/
[..]/output/build/busybox-custom
>>> busybox custom Configuring
/bin/sed -i -e "/\\<CONFIG_NOMMU\\>/d"
[..]/output/build/busybox-custom/.config
/bin/sed: can't read [..]/output/build/busybox-custom/.config:
No such file or directory
make: *** [[..]/output/build/busybox-custom/.stamp_configured] Error 2
This patch modifies busybox.mk to copy the config file from the configure
step instead, as linux is doing, and fixing the described scenario.
This fixes bug #5030: https://bugs.busybox.net/show_bug.cgi?id=5030
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
After the latest patches top-level parallel Makefile is working but
there is still an issue when a package has an unspecified optional
dependency so change the comment to explain that.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add '+' prefix to the $($(PKG)_BUILD_CMDS) and $($(PKG)_INSTALL*_CMDS)
commands to enable jobserver for the sub-make.
Without the '+' prefix GNU make does not detect the sub-make so it
disable the jobserver for the sub-make.
>From GNU make documentation:
Using the MAKE variable has the same effect as using a ‘+’ character
at the beginning of the recipe line. This special feature is only
enabled if the MAKE variable appears directly in the recipe: it does
not apply if the MAKE variable is referenced through expansion of
another variable. In the latter case you must use the ‘+’ token to get
these special effects.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relyng on
the left to right ordering of evaluation of the prerequisites add an
explicit rule to describe the dependencies.
Add explicit rules to describe the following dependency chain:
$(TARGETS) -> target-finalize -> rootfs-* -> target-post-image
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be able to use top-level parallel make we must not depend in a rule
on the order of evaluation of the prerequisites, so instead of relying
on the left to right ordering of evaluation of the prerequisites add
an explicit rule to describe the dependencies.
We cannot use the pattern rules because they must have the same
dependency for every package, but we need to change the dependencies
depending on $(2)_OVERRIDE_SRCDIR variable value, so we must use a
more flexible way like $(2)_TARGET_% variables.
So add explicit dependencies for the following stamp files:
$(2)_TARGET_EXTRACT
$(2)_TARGET_PATCH
$(2)_TARGET_CONFIGURE
$(2)_TARGET_BUILD
$(2)_TARGET_INSTALL_STAGING
$(2)_TARGET_INSTALL_TARGET
$(2)_TARGET_INSTALL_IMAGES
$(2)_TARGET_INSTALL_HOST
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit makes the dependency from the target toolchain explicit.
This way we can buid from command line a package that use
inner-generic-package right after the configuration phase, example:
make clean <package-name>
Also remove TARGETS_ALL because the only purpose was to add toolchain
dependency so it's superseded by this commit.
To prevent circular dependency add the new variable
<pkgname>_ADD_TOOLCHAIN_DEPENDENCY to avoid adding the toolchain
dependency for toolchain packages.
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move "dependencies" "dirs" "prepare" dependencies from "toolchain" to
every package.
This way we can build correctly every package right after the clean
stage.
As example with this commit we can build successfully the glibc right
after the clean stage:
make clean glibc
This is also a step forward supporting top-level parallel make.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we are changing the default dbus user, make sure this user is
consistently created.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change the download source to a Github repository which is more recent.
This patch also bump libatomic_ops version and remove a patch that is
now upstream.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
glibc 2.19 has been released recently
(https://sourceware.org/ml/libc-alpha/2014-02/msg00224.html). This
commit allows to build a toolchain with this new version. In order to
allow this, we add a version selection that did not exist for
glibc. We default to 2.18, which was the only supported version until
now, and add an option for 2.19.
For microblaze, which uses a specific glibc version, the version
selection choice is not displayed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 262a4c0bf7.
Compiler error has been fixed, and building this package doesn't cause an
ICE anymore.
Signed-off-by: Anton Kolesov <anton.kolesov@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the build of systemd is broken with the internal toolchain
backend, because we have uClibc patches that add support for
execvpe(), but we also have a patch for systemd that adds execvpe(),
which was added when the internal uClibc didn't support execvpe().
However, simply dropping the patch is not a solution, as it would
break the build of systemd with any other uClibc than the ones built
with Buildroot. For example, a Crosstool-NG uClibc toolchain would
fail.
Beyond this execvpe() problem, there are also other problems that
prevented systemd from being built with unpatched uClibc.
This patch does the following:
* Add sequence numbers of systemd patches.
* Regenerate them to avoid fuzz.
* Improve the uClibc compatibility patch so that it:
- Detects whether execvpe() is available or not, and if not
available provide an implementation.
- Detects if dup3() is available or not, and if not available
provide an implementation.
- Detects if MSG_CMSG_CLOEXEC is defined or not, and if not, define
it to the appropriate value.
This has been tested with uClibc internal toolchain, uClibc external
toolchain built with Buildroot, uClibc external toolchain built with
Crosstool-NG, and glibc external toolchain.
Fixes bug #6776.
Fixes:
http://autobuild.buildroot.org/results/591/591c6055430da334bd1e46e7d01497add45da837/build-end.loghttp://autobuild.buildroot.org/results/e58/e5851939d2837d4e35a4c1d9ca6df3c93ed5a34b/build-end.loghttp://autobuild.buildroot.org/results/92e/92e4c40c69a3feb4046b2fe5a0d8c69d5a44a157/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps systemd to v207 but also declares it as a provider for the
udev virtual package.
Starting with systemd 183, udev has been merged into
systemd. The udev daemon is now installed as /lib/systemd/systemd-udevd.
This means that /dev management using udev is only available if systemd
is chosen as init system.
When configuring systemd, the following options are available:
- activation of systemd-journal-gatewayd, to access the journal via
HTTP.
- activation of extra features like journal compression and sealing.
Support for uClibc has also been removed because:
- upstream has no interest in supporting uClibc.
- using a shrinked libc brings no advantage, given the size of all the
programs included in Systemd. So using glibc does not matter.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch converts udev to a virtual package. For the moment, there is only
one provider for the udev features: eudev.
Packages meant to provide udev-like features must select the symbol
BR2_PACKAGE_HAS_UDEV.
Packages depending on BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_UDEV or
BR2_PACKAGE_UDEV have been converted to use the new symbol.
[Peter: move legacy symbols under 2014.05]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
eudev is a userspace device management daemon. It is a standalone
version, independent from systemd. It is a fork maintained by Gentoo.
Features:
- No extra configuration options are available: Gudev is build if
libglib2 is selected.
- No dependency on hwdata as the package uses its own hardware
database (as does systemd).
eudev 1.3 is in sync with systemd v207.
[Peter: add BR2_USE_MMU dependency]
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable elfutils for avr32, because:
- elfutils uses canonicalize_file_name, which came after uClibc-0.9.31.
- avr32 uses a toolchain with uClibc-0.9.31
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adjust phpize and php-config to make them work for cross-compiled
external extensions.
While at it also fix dl* issues that prevent said extensions from
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch that commit a728e2fe35 (coreutils: fix build against uclibc
snapshot) adds mentions the wrong coreutils version in its description.
Also fix the sign-of tag while at it.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xtensa port uses __xtensa_libgcc_window_spill in libgcc to implement
__builtin_frame_address. This symbol is local/hidden in libgcc. This is not a
problem when linking against static libgcc. But g++ defaults to
-shared-libgcc, thus breaking link against C++ shared libraries that are using
__builtin_frame_address as follows:
ld: test: hidden symbol `__xtensa_libgcc_window_spill' in .../libgcc.a(lib2funcs.o) is referenced by DSO
Add upstream patches that make libgcc_s.so a linker script that links in
unresolved symbols from the static libgcc, similar to the ARM and PowerPC
ports.
Fixes:
http://autobuild.buildroot.net/results/e2d/e2d1a763fa86b8575e2e48e6d73c018175f43e7c/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported on IRC, our default busybox configuration doesn't support SHA
encoded passwords, breaking login if enabled under system configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
20140129:
Minor bug fix in configs 19d2:0149 and 19d2:2000 (Lars Melin reported)
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Version 2.1.0, 2014/01/28
ATTENTION: -I flag meaning reversed, default is to skip SCSI inquiry;
introduction of StandardEject, replacing many MessageContents with the
same function, reducing size of device config files, and always including
the 'Allow Medium Removal' before ejecting (thanks to Lars Melin for
the idea); fix in "bulk_read", removing bogus CSW request (report from
"Sonya@zte")
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This version includes:
- add f2fstat tool
- critical bug fix on nat bitmaps
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in
Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.
What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]
Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.
If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.
If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.
When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.
Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The legacy support for the old BUILDROOT_DL_DIR and BUILDROOT_CONFIG
breaks down when make is invoked recursively - which is done in a few
cases, e.g. silentoldconfig, external-defs, ... These targets always
give a legacy error.
For BUILDROOT_DL_DIR, this is fixed by making sure that the original
value of BR2_DL_DIR taken from the environment is also exported again.
For BUILDROOT_CONFIG, this is fixed with an additional comparison of
the environment variable's value with the fake value that we introduce
ourselves.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use correct bin name so that JPEG_TURBO_REMOVE_USELESS_TOOLS fixup
actually removes it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use correct bin name so that LIBJPEG_REMOVE_USELESS_TOOLS fixup
actually removes it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rpi-userland and libcoffi are not strictly required to boot up the
Raspberry Pi, so remove them from the defconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpanminus was marked as broken, now it becomes useless with the Perl infrastructure.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Perl infrastructure uses a host version of Module-Build
(see previous commit "host-perl-module-build: new package").
The target version is never used, so no need to patch it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official Perl documentation refers only to PERL5LIB.
PERLLIB is obsolete, we don't need to be compatible with Perl4.
PERL5LIB is used in all environment, so it is simpler to just export it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to the default version of U-Boot, at this time 2013.10.
Tested with an old uEnv.txt (i.e. using uImage) and with the
currently prefered zImage.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This goes hand-in-hand with the kernel update.
The version is taken from meta-ti.
The new kernel version, 3.12, requires a newer PM FW.
This should correspond to v05.00.00.02, though that tag
has not been pushed...
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Git repo version is taken from meta-ti.
It's a 3.12.10 kernel with TI's own patches on top.
The defconfig has been kept rather close to our old defconfig.
The kernel has been boot-tested using an NFS-root.
Apart from the kernel change, the linux headers has also been
updated from 3.8.12 to 3.12.10.
[Peter: drop UEVENT_HELPER_PATH setting]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise build fails in intl/relocatable.c with:
./relocatable.c: In function 'libintl_relocate':
./relocatable.c:402:40: error: 'INSTALLPREFIX' undeclared (first use in this function)
./relocatable.c:402:40: note: each undeclared identifier is reported only once for each function it appears in
[Peter: drop redundant 'else' part]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When mdev /dev management is chosen in the buildroot configuration, the
Linux configuration is updated automatically to set option
CONFIG_UEVENT_HELPER_PATH to "/sbin/mdev". However, the help text of this
option explicitly recommends not setting this option due to large
performance impact during boot (experienced first hand by the reporter ánd
author).
The mdev startup script S10mdev already sets the helper during userspace
boot, which will make sure mdev is working correctly.
Fixes bug #6596: https://bugs.busybox.net/show_bug.cgi?id=6596
Reported-by: Andreas Koop <andreas.koop@zf.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel headers versions 3.1, 3.3, and 3.5 have been deprecated
since 2013.02 and thus can be removed in 2014.02.
For legacy handling, we automatically select versions 3.2, 3.4, and 3.6,
respectively.
Additionally, this patch removes the now unused symbol
BR2_DEPRECATED_SINCE_2013_02.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can
be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ccache target package has been deprecated since 2013.02 and thus can be
removed in 2014.02. This does not change anything about host ccache (used
for speeding up builds).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The automake support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host automake support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autoconf support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host autoconf support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes snmp++v3.3.3
====================
- Fixed: [APP-30] SNMP++ cannot BER decode Oids starting with 2 and
with second sub-identifier >39 correctly.
- Fixed: [APP-31] SNMP++ does not encode Oids starting with 2 and
second sub-ID greater than 47 correctly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the UBI FS target creates a ubinize configuration
file on-the-fly, for a single volume. Add an option to specify
a custom config file.
E.g., one might want to deploy a system with a volume for the
built ubifs image, a volume for a future upgrade image, and a
volume for user data.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scan_patchdir is called recursively. For this to work properly, the
variable path which is set to $1 at the very beginning must be local not
global.
A test case is to set BR2_GLOBAL_PATCH_DIR to 'mypatches' and having the
following tree in the buildroot root:
$ find mypatches/
mypatches/
mypatches/busybox
mypatches/busybox/subdir.patch
mypatches/busybox/subdir.patch/busybox-0001-abc.patch
mypatches/busybox/busybox-0002-def.patch
mypatches/busybox/asubdir.patch
mypatches/busybox/asubdir.patch/busybox-0003-xyz.patch
When running 'make busybox-dirclean busybox-patch' originally, you'd get:
Applying busybox-0003-xyz.patch using patch:
Applying busybox-0002-def.patch using patch:
Error: missing patch file
mypatches/busybox/asubdir.patch/busybox-0002-def.patch
While with this fix:
Applying busybox-0003-xyz.patch using patch:
Applying busybox-0002-def.patch using patch:
Applying busybox-0001-abc.patch using patch:
This fixes bug #6434 (https://bugs.busybox.net/show_bug.cgi?id=6434)
Signed-off-by: Daniel Mentz <daniel@exxm.de>
[Thomas: update commit message with test case]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual is a bit vague about whether Config.in and external.mk
are mandatory or optional.
Make it explicit in the manual that they are mandatory.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All PowerPC CPUs do not support altivec instruction set; so enable its
support only when the sub-architecture support it.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add info about how to install a custom uboot on the zedboard.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi-compositor was broken with the 1.4.0 release,
but we now have a fix from upstream.
Add this patch, and remove the 'depends on BROKEN'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With toolchains that include linux kernel headers before the 3.4 kernel,
an issue exists with linux/mmc/ioctl.h in that it doesn't include
linux/types.h.
Merged the patch with an existing patch for mmc-utils as it modifies
the same file and fixes similar issues. Also updated the patch to
conform to the buildroot patch naming standard.
Fixes:
http://autobuild.buildroot.net/results/828/828c7a686736710c4fcb152230d0fa6b5f4d6ad3
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the grub package is selected it also selects
BR2_HOSTARCH_NEEDS_IA32_COMPILER. This triggers a test in dependencies.sh
to verify the host compiler can build 32 bit executables. Currently this
test does not set any output for the compiler which causes a stray a.out
to be create outside the output directory. This patch sets the compiler
output to /dev/null so no a.out is created but the test is still performed.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the opencv package globally depends on BR2_TOOLCHAIN_HAS_THREADS
and BR2_USE_WCHAR, then cleanup these redundant (and useless)
dependencies in the opencv's sub-options.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the previous patches, no-one is using pkgparentdir anymore, so
remove it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fourth parameter to inner-generic-package is no longer used. Removing
this parameters requires renaming all usages of $(5) to $(4), and updating
the calls to inner-generic-package (and equivalent for the other package
infrastructures).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation of the removal of the 4th parameter to inner-generic-package
and the pkgparentdir helper function, this patch removes the direct usage of
this 4th parameter. The remaining usage
ifeq ($(4),boot/)
can become
$(filter boot/%,$(pkgdir))
instead (and similar for toolchain).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Variable FOO_DIR_PREFIX in inner-generic-package isn't really needed. The
contents of this variable are 'package' for normal packages, 'boot' for
bootloaders, and 'linux' for the linux kernel.
When patching a package, all you need to know is the directory where
patches can reside, which is already returned by $(pkgdir). In order to be
able to use this variable outside of inner-generic-package, we introduce a
target-specific variable PKGDIR that equals to this $(pkgdir).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling make 'functions', the $(call) keyword is only needed if the
function takes arguments. For pkgdir, pkgname and pkgparentdir this is not
the case, so we can remove the call to make things more readable.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (qstripped variant of a config option
should be named BR_XXX).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default of choosing the fixed-point implementation if
the target hardware does not have floating-point unit is not
always the best choice. Modern ARM hardware has floating
point support but most likely the fixed-point implementation
in Opus will still perform better. In particular if your CPU
supports the NEON extension.
This commit allows to select the fixed-point implementation
manually and sets the default based on the availability of
a floating-point unit.
[Peter: force option for sw float, slightly reword]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pread/pwrite handling on the 0.9.33 branch doesn't take into
consideration architectures with an ABI requiring natural alignment for
64bit arguments (afaik ARM EABI, MIPS O32, PPC, SH and Xtensa), causing
havoc.
The issue has been brought with the uClibc developers, but so far a fix is
not available - So lets revert the patches for now as they cause real
issues.
For further details, see:
http://lists.busybox.net/pipermail/buildroot/2014-January/087050.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current stripping strategy requires that shared libraries have the
executable permission. However, this is by far not something
recognized as a standard behavior: Debian/Ubuntu distributions for
example do not have executable permissions on their
libraries. Therefore, pushing to upstream packages fixes that add the
executable permissions is not easy.
As a result, this commit improves the stripping logic so that it not
only strips the files that are executable, but also the ones that
match '*.so*', which should match both the shared libraries and the
dlopen()'able plugins, as long as they have a .so extension.
Thanks to this addition, a number of manual "chmod +x" done by various
packages can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script finds libz in the distribution libraries, which causes
zlib support to be dropped from the cross-compiled GnuTLS.
Signed-off-by: Antoine Pierlot-Garcin <antoine@bokbox.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If two files with the same relative paths exist in multiple overlay
skeletons, and they have the same modification time and size, then rsync
might not copy the later file on top of the earlier file. This patch fixes
this by adding the -I option to the rsync commands used in the overlay
skeleton file installations. ("man rsync" indicates that this option turns
off the file-size/mod-date "quick check" behavior, causing all files to be
updated - more like the cp commands that we had originally.)
[Peter: use --ignore-times to make it obvious what the option does]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
microcode collections, and to use the kernel facilities to upgrade the
microcode on Intel system processors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: drop 'sid' from upstream URL]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some compilers, such as the Blackfin GNU compiler, prefix a character to any
C symbol in generated assembly code. If any assembly symbol is invoked
from C code, it needs to be prefixed as well.
Note: since autoreconf doesn't work with this package because automake
isn't used.
Fixes:
http://autobuild.buildroot.net/results/c40a22814b405de2c5c75139cfc393c863ed4b81/
[Ryan: add information about why patching configure is ok]
[Ryan: add renaming of patches to be consistent with standard]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a couple of buffer overflows so it should be considered as a
security bump (no CVEs though).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClibc options for sh2a is SH2A, not SHA2, and this value should
be used for sh2a, not sh2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current git download helper creates the tarball by doing:
git archive <version> | gzip -c > <tarball>
Unfortunately, even if "git archive" fails and returns a non-zero
error code, gzip ignores that, compresses nothing, and returns success
(zero error code). The consequence of this behavior is that when the
git version provided in the package is incorrect, we are not failing
during the download step, but later on when trying to extract the
tarball (which was incorrectly created as a result of the failing git
archive).
To fix this, we change the tarball creation logic to:
git archive -o <tarball>.tmp <version> &&
gzip -c <tarball>.tmp > <tarball> &&
rm -f <tarball>.tmp
If the build is interrupted during the "gzip" command, we may leave
the .tmp file behind us, but this also happens with wget downloads,
and is generally not considered a problem, since this temporary file
will be overwritten next time we attempt to do download this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Probably due to some copy/paste mistake, Config.in.sh was defining
BR2_ENDIAN to "LITTLE" when the architecture is BR2_x86_64. Due to the
fact that Config.in.sh is never included when we are building for
x86_64, this is a no-op, but is certainly good to clean up.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udpcast was checking the (non-existing) BR_LARGEFILE variable to know if it
should enable stat64 or not, but the package itself depends on largefile
support and more importantly, configure doesn't look at this variable at
all, so we can just drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the semantics of FOO_DIR_PREFIX will change in the following patch, we
want to remove unnecessary usage of this variable.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The intel microcode is a proprietary package which provides a data file
used to correct processors errors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: set _LICENSE_FILES]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If iconv is built before gnupg, this package will link against it; if it is
built after this package, it will not be linked against it. To make the
build reproducible, make sure that iconv is always built before this
package.
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the option to use a local directory as the source for
building the Linux kernel, which can be useful during
kernel development.
Signed-off-by: Rafal Fabich <rafal.fabich@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the GPM_RUN_AUTOGEN to be a PRE_CONFIGURE step because this step
depends on the dependancies being built. If it is a POST_PATCH step
the dependencies won't be built and the GPM_RUN_AUTOGEN step will fail
(if the host doesn't have autotools).
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
the initial implementation assumes that when a version found in
buildroot is different from the one in the X11 release, it
requires an upgrade. even though this is most likely the case, it
could be a downgrade too, and it's probably worth highlighting
such cases when it (rarely) happens.
LooseVersion from distutils is doing the low level job of sorting
version numbers represented in strings...
[Thomas & Thomas:
- do not count packages more recent in Buildroot than in the latest
X.org release as to be downgraded. If we have more recent version,
it's generally for a good reason, so we want to keep them as
is. Such packages are counted as "nothing to do", but for
information, we indicate that there are "More recent"
- also remove the "nothing to do" action indicator. It used to be a
simple dash, which was not really useful.
]
Signed-off-by: Nicolas Dechesne <ndec13@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages install locales to /usr/lib/locale.
Parse and purge unneeded ones there too.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some toolchains include asm-generic/int-l64.h from their asm/types.h
file for certain 64-bit architectures. This causes a conflict between
types like this one:
asm-generic/int-l64.h:28:25: error: conflicting types for '__s64'
typedef __signed__ long __s64;
^
In file included from mmc.h:17:0,
from mmc_cmds.c:30:
asm-generic/int-ll64.h:29:44: note: previous declaration of '__s64' was
here
__extension__ typedef __signed__ long long __s64;
This patch has been submitted upstream.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Convert the ever growing drop-SUSv3-legacy patch to a sed expression.
Modify the initscript to create ed25519 server key.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Try to clarify how the wrapper passes arguments and why.
This is mainly because the output you can see when you build, does not
reflect what is invoked by the wrapper.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for h264 video deocding, audio playback and cec.
Some improvements in HDMI output management.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If any of the post-image scripts wants to create mtd/ubi images,
we need to expose an option for mtd-tools to be user-selectable.
[Peter: fix include order]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
JOE is an easy-to-use, full-screen, terminal-based text editor.
http://joe-editor.sf.net
[Peter: add uClibc patch, add to package/Config.in, optional ncurses support]
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zxing package currently selects libiconv when locale support is not
available in the toolchain. This patch stops the zxing package selecting
libiconv. The zxing package now uses uses libiconv if it's available
otherwise iconv support is disabled in zxing.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches applied upstream.
Mark the rpi-backend as broken, since it segfaults.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 1.4.0, weston requires wayland-scanner to build its DT.
So far, we got away with just hand-building wayland-scanner, and made
that available in HOST_DIR/usr/bin
But now, weston also requires wayland's DTD, which we did not take care of
in our dirty little hack.
So, the best solution is to just build a host-variant of wayland, so
we get both wayland-scanner, and the DTD.
But then, we do not build the target wayland-scanner (he, wayland tries
to run it at build time...). So it is a matter of just tweaking a little
bit the host .pc file (which weston uses to find wayland-scanner, sigh...)
and fake it as a target .pc file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use CFLAGS from command line
- Remove "Check C compiler type (optimization options)"
This test force optimization to -O3
while it is already set in CFLAGS
- Don't use host CPP
- Remove "Check for Large File Support"
LFS support is already set in CFLAGS
Note: configure script still use host nm
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
infozip's Makefile expect $(AS) to output by default to <basename>.o
but when called from Buildroot, the value for $(AS) is set
to to invoke the toolchain's $(AS) directly, and the output of it
goes to a.out.
So, define $(AS) with $(CC -c)
Reported-by: Кирилл Луценко <lucenko_kirill@mail.ru>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with version 2.3.0, libroxml is now using autotools.
With autotools, the -Werror flag was dropped
-> no need for the patch libroxml-0001-werror.patch
With autotools, the availability of -Wno-*-unused is auto detected
-> no need for the patch libroxml-0002-wno-unused-result.patch
Signed-off-by: Tristan Lelong <tristan.lelong@blunderer.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnutls-01-gettime.patch was applied upstream, AUTORECONF is no longer
necessary.
The GNUTLS_LIBREGEX_CHECK_FIX didn't actually work before, because it was
overwritten by the autoreconf. It looks like things still work without
regex. However, this patch reinstates the regex support by setting
libopts_cv_with_libregex=yes in the environment.
Fixes http://autobuild.buildroot.net/results/b22/b22f2caa79f371c625939b65a88a2073382c5288
(failure in libvncserver) because gnutls.so is now properly linked with -lrt.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: file header, structure like gst-ffmpeg, drop unneeded libav args]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gstreamer / gstreamer1 names are not directly obvious to outsiders, so
spell out the fact that they are about the 0.10 and 1.x versions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 25926af5 disabled udev support for the host variant, but forgot to
remove it from the (implicit) host dependencies.
Also reordered things to keep the HOST_* definitions together.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: move to hw menu, int type for nr modems, drop _BINARIES_DIR
variable, fix config file name]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmake is the only build-system we support that does colour its output,
Also, since parallel builds generates intermixed output lines, it makes
for ugly-looking output.
Just disable cmake colouring globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the Buildroot tree is read-only, then $(TARGET_DIR_WARNING_FILE) is
copied read-only into target/ but we may want to remove it during the
build process.
This poses no real problem, since target/ itself is guaranteed to be
writable, but for good measure, force $(TARGET_DIR_WARNING_FILE) to be
writable itself.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(UCLIBC_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to .config fail.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(KERNEL_SOURCE_CONFIG) is read-only (eg. because Buildroot's source
dir is), the rm of $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig will
either fail, or prompt the user, both of which we want to avoid.
Make it writable by using $(INSTALL).
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp, don't 'rm -f']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(BUSYBOX_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to $(BUSYBOX_BUILD_CONFIG) fail.
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the source target skeleton is read-only (eg. because Buildroot's
source dir is), modifications to the output target (such as creating
/etc/hostname and /etc/issue) fail.
(This can happen if the Buildroot source dir is NFS-mounted read-only
to be shared between different machines, for example).
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: we use rsync now, not cp; --chmod=Du+w
suggested by Arnout; clarify commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2013-6712.
Note that there's no xz format tarball for 5.5.8.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OTP R16B03-1 is a service release which corrects a few issues found in
the R16B03 release. The corrections are:
- The ODBC application was missing in the prebuilt Windows installers
- 3 corrections in the SSL application:
- Add missing validation of the server_name_indication option and test for
its explicit use.
- Elliptic curve selection in server mode now properly selects a curve
suggested by the client, if possible.
- The server did not indicate support for secure renegotiation during TLS
extension handling.
- In the syntax tools application a bug was introduced which broke
reverting of local funs. This is now corrected (thanks to Anthony
Ramine)
- wx - Solved a problem which caused the debugger to crash when closing a
window. Fixed static linking on Mac.
- xmerl - Fixed a problem in the SAX-parser when the header of the next
document was appearing in the buffer when using the
xmerl_sax_parser:stream/2 function.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't have libcddb in Buildroot, and the detection handling in
configure uses pkg-config, so explicitly disable it so we don't
need to build host-pkgconf just to notice that it isn't available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rtmpdump CAN work without a crypto backend (by passing CRYPTO=), so
don't enforce gnutls.
Fixes a dependency issue as gnutls needs wchar, but rtmpdump
(and polarssl/openssl) don't.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This seems to especially affect the kernel, but in an
interrupt-heavy system, this fixes a bug that can cause frequent
NULL pointer dereference crashes on ARM systems.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU tar > 1.13.17 interprets TAR_OPTIONS as an environment variable
containing options to be prepended to the set on the command line.
Since we use the same variable, if the user's environment already
contains TAR_OPTIONS, our use of the same variable name modifies
the environment and causes untars to misbehave when TAR_OPTIONS
causes a -xf to be prepended to the tar command line, likely
converting a subsequent flag into a spurious filename.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If tcpdump is enabled set ac_cv_path_tcpdump_path so that verbose output
is enabled on the target.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise we get:
package/openssl/Config.in:1:error: recursive dependency detected!
package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_GNUTLS
package/gnutls/Config.in:1: symbol BR2_PACKAGE_GNUTLS is selected by BR2_PACKAGE_OPENSSL
Which is caused by lftp doing:
select BR2_PACKAGE_GNUTLS if !BR2_PACKAGE_OPENSSL
And rtmpdump doing:
select BR2_PACKAGE_OPENSSL if !BR2_PACKAGE_POLARSSL && !BR2_PACKAGE_GNUTLS
Which confuses kconfig. Work around it by swapping gnutls and openssl in
rtmpdump so it matches lftp.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on the original new pkg patch submitted last Jan
and is part of the "Patchwork oldest patches cleanup #5".
[Peter: fix CONF_OPT indentation]
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a custom rootfs skeleton, the host-mkpasswd target is not
automatically built, even if some packages add users (i.e. when
PACKAGES_USERS is not empty).
In this case, the rootfs generation may fail because the mkpasswd
provided by some distribution does not support all options used in the
mkusers script.
This patch avoids such trouble by automatically adding the host-mkpasswd
package to the dependency list of the rootfs targets if users needs
to be created.
[Peter: minor rewording of commit message]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is now handled by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMake offers a couple of places where one can specify how to build a
library:
- when you create the library target itself, by calling
add_library(target [SHARED|STATIC] ...)
- or globally, when you configure the build, by setting the
BUILD_SHARED_LIBS CMake flag.
* if the library target kind of library is specified:
it overrides the global setting BUILD_SHARED_LIBS;
* else, if the global setting BUILD_SHARED_LIBS is set:
it builds according to the BUILD_SHARED_LIBS flags;
* otherwise:
for linux, it will build static library (like BUILD_SHARED_LIBS
default is OFF).
So, we can consider the setting BUILD_SHARED_LIBS acts a bit similarly
to the autotools ones '--disable-static' and '--enable-shared'.
Thus, it makes sense for Buildroot to globally drive to CMake flags in
the cmake-package infrastructure.
It seems we never trigger this so far because:
- either we specified it in the *.mk file (e.g. opencv.mk);
- or it was already set per target by the projects' upstreams.
Followup patches will clean the remaining BUILD_SHARED_LIBS in the
package *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As this question has popped up multiple times on the mailing list, clarify
that selecting longterm 2.6 kernels requires the 'custom tarball' option
instead of 'custom version'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'printf' was introduced because it is more portable than 'echo -e'. But
when the escape sequences are just newlines we can just as well use
plain 'echo' (and remove the newline escape sequences).
This looks cleaner than having some lines with echo and some with
printf.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not buildroot convention to align the = signs in .mk files, so this
shouldn't be suggested in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Shrinks library size. From the release notes:
Nathan Froyd at Mozilla noticed something odd in the libvorbis
sourcebase. Codebook 'length lists' only use integers in the range
of 0 to 32. Well, worse than integers, actually, longs. And the
lengthlists are big; the static data comprises the bulk of
libvorbisenc.
In the earliest days of Vorbis development 15 years ago, codebooks
were constructed differently and the lengthlists were quite small.
Longs still weren't necessary, but the wasted space was
negligible. When the coding strategy shifted and these lists
became much larger, no one caught the wasted space. The vast
majority of optimization was always for speed, not space. The only
concentrated effort in trimming Vorbis library size down over the
past decade had been in the decoder.
But now browsers need to ship encoders, and size matters. Add that
to 64 bit taking over (and doubling the wasted space in the
lengthlists), someone finally noticed the oversight.
That's a long way of saying [1]"Xiph.Org is pleased to announce
the release of libvorbis 1.3.4..."
No functional changes, but the encoder lib is now a shade over 25%
the size it was in the 1.3.3 release.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Config.in.legacy entry associated with the replacement of libnfc-llcp
was broken in multiple ways:
- it was not correctly added within the section for 2014.02 deprecation
(recently fixed by Yann E. Morin with commit
f169e5e105)
- it still had select/depend statements from the original symbol, which
should not be added in Config.in.legacy.
- it did not select the replacement symbol as to make the transition for
users more convenient.
- indentation of the help text was not tab+2spaces.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The on-target lzma package has been deprecated for a long time, so remove
it. This does not remove the support for generating lzma-compressed rootfs
images.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The buildroot manual contains a list of deprecated items, with their config
title text, and the location in the config menu. If the config text does not
mention a package name, this can be confusing.
For example, the symbol BR2_PACKAGE_FLEX_BINARY has as text:
'Install tool in the target', which outside of the flex context makes no
sense at all.
To make sure the deprecated packages list in the manual is understandable,
rename the (deprecated) flex 'target binary' config option.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since this is the only package depending on BR2_DEPRECATED_SINCE_2012_05,
remove that symbol as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
support/dependencies/dependencies.sh uses #!/bin/sh shebang. It is not
guaranteed that /bin/sh provides an 'echo' implementation that
understands the '-e' flag (interpret backslash escape chars). For
example, dash doesn't.
'printf' is more portable (it must interpret backslash escape chars,
according to POSIX), so use that.
NOTE: Before the previous commit, the dependencies.sh script used
/bin/echo instead of the shell built-in. That's probably why this hasn't
come up before.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch has been merged upstream, hence the bump and its removal
from package directory.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the defconfig to note that it's explicitly intended for the PA
kit revision since it'll likely brick a PB if the bootloader is flashed
without changing the U-Boot board name (and that it's untested in real
hardware).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot fails to run on NixOS because it has no /bin/echo or
/bin/grep. Instead of relying on absolute paths, rely on tools to be
available in PATH. This should work for all systems.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit c3d690166c.
The real cause of problem is missing posix_fadvise() implementation in uClibc
for xtensa. This has now been fixed with the uclibc version bump. The internal
e2fsprogs posix_fadvise() implementation is broken on 32bit systems anyway, and
upstream has removed it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only enable SDL support if SDL and SDL_net are already enabled in the
configuration.
[Peter: drop SDL comment]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use homepage rather than trac as pointed out by Yann]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As said in its help text, eigen heavily uses C++ features.
So, explicit this dependency in the Config.in.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A slew of fixes and improvements, specially directed toward, but
not limited to, the sample codes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bring a slew of fixes and improvements to:
- boot hang
- camera zoom, night mode
- MJPEG decoder/encoder
- video decoder/encoder
- dispmanx (3D engine)
- documentation
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 94dd02f5d0.
The change breaks defconfigs from BR2_EXTERNAL, both for in-tree and
out-of-tree builds.
Besides, the problem reported in 94dd02f could not be reproduced.
I can read French, and I suspect a relative path was used for either
BR2_EXTERNAL or O.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The compilation of the program weston-launcher is currently disabled, so
the only way to launch Weston (on framebuffer) is to execute (as root):
$ openvt -c 2 -s -- weston \
--backend=/usr/lib/weston/fbdev-backend.so \
--tty=2 \
--log=/tmp/weston.log
Unfortunately you will only end up with a black screen. The reason is
given in the log file:
/dev/tty2 is already in graphics mode, is another display server running?
Here is the fix from upcoming version 1.4.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0a5d524015 added a libmodplug package
to Buildroot; this means that libmodplug support can now be enabled for the
vlc package.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Suppress the following error:
route: SIOCDELRT: No such process
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change adds firmware for the Chelsio T4 1Gb/10Gb ethernet cards.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add revision 17 of the Broadcom NetXtreme II 10Gb ethernet driver.
We also add an ethernet submenu for the firmware selection.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minor nit: Like "hardware", "software" and "sheep", the plural of
"firmware" is "firmware".
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
20131113:
Added devices: Quanta 1KR / USB-lte 7410, Quanta MobileGenie 4G lte,
AVM Fritz!Wlan USB N v2, Alcatel-sbell ASB TL131 TD-LTE, Vodafone K4305,
K5150, K4201, K4202 and K4606; ZTE MF821D (Variant), ZTE MF70, ZTE MF60,
Haier EVDO Rev. A; several cleanups and fixes. Special thanks to Lars
Melin for many device contributions and corrections!
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AMD Jaguar ( https://en.wikipedia.org/wiki/Jaguar_%28microarchitecture%29 ) is
suddenly a popular architecture since it is used in the PS4 and the XBox One.
Many embedded systems are also likely to use it in the next years.
This patch adds support for GCC architecture-specific optimisations and
tuning for these CPUs.
These optimizations are available with GCC 4.8+.
Signed-off-by: Adrien Beraud <adrien.beraud@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
psplash doesn't see a new release for quite some time. The lattest
commits brought some nice bug fixes and a feature that allows to
easily customize the splash image.
[Peter: COPYING file no longer available]
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently ld-linux-armhf.so.* is added to external libs when
using an EABIhf toolchain, but this naming is not used by uClibc.
Fix by adding a check for glibc.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
protobuf-c only requires protobuf when building the protoc compiler,
hence protobuf can be dropped from the target dependencies.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Eliminate the following error message on every boot:
grep: /etc/resolv.conf: No such file or directory
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mmc-utils provides tools to manipulate mmc device registers.
[Peter: drop uninstall, move to filesystem and flash utilities]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the readme.txt for the raspberrypi board less misleading regarding the
kernel image file name.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the google.protobuf check in an upstreamable way.
As suggested by Arnout, use an autoconf ac_cv_have_* variable
so we can pass it on the command line. This is generic behaviour
for a lot of autoconf internals, so it makes sense to do it this
way.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if Blackfin GNU toolchain add prefix '_' to all symbols,
symbol prefix is not accepted in the link flag --version-script.
Don't append prefix in the symbols in the version script file.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, there are five packages which use 'subst' macro to change their version.
* Three of them (ebtables, icu, perl) use this macro "in place" :
EBTABLES_SITE = http://downloads.sourceforge.net/project/ebtables/ebtables/ebtables-$(subst .,-,$(EBTABLES_VERSION))
ICU_SOURCE = icu4c-$(subst .,_,$(ICU_VERSION))-src.tgz
PERL_CROSS_OLD_POD = perl$(subst .,,$(PERL_CROSS_BASE_VERSION))delta.pod
PERL_CROSS_NEW_POD = perl$(subst .,,$(PERL_VERSION))delta.pod
* Two of them (boost, libnss) use an additional variable :
BOOST_FILE_VERSION = $(subst .,_,$(BOOST_VERSION))
BOOST_SOURCE = boost_$(BOOST_FILE_VERSION).tar.bz2
LIBNSS_SITE_VERSION = $(subst .,_,$(LIBNSS_VERSION))
LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(LIBNSS_SITE_VERSION)_RTM/src
* Additionally two packages (duma, rings) doesn't use it at all :
DUMA_VERSION = 2_5_15
DUMA_SITE = http://downloads.sourceforge.net/project/duma/duma/2.5.15
RINGS_VERSION_MAJOR = 1.3.0
RINGS_SUBDIR = rings-v_1_3_0
This commit makes changes to use 'subst' macro "in place", in all of them.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
warning: (BR2_INIT_SYSV) selects BR2_PACKAGE_SYSVINIT which has unmet direct
dependencies (BR2_PACKAGE_BUSYBOX_SHOW_OTHERS && BR2_INIT_SYSV)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to prevent sysvinit and systemd to be selected at the same
time, sysvinit can now only be selected if SysV is chosen as init
system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter has just pointed me to the PGP signatures of the release tarballs,
which exist since he's been doing releases.
This was not obvious to me that the releases were signed, as there was
no info about it on the website.
So, add such links on the downloads page.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: some cleanups and rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces the luainterpreter virtual package, which
is provided either by 'lua' or by 'lua-jit'.
Packages that require a Lua interpreter can then depend on
BR2_PACKAGE_LUAINTERPRETER (in their Config.in) and luainterpreter
(in their .mk).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: switch to package-defined providers,
apply Thomas' comments]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch only add the native cwiid library and a couple of tools.
The 2 first cwiid patches are retrieved from upstream and fix build
issues, so does the 3rd one.
The 4th patch allows to disable wmgui build, so allows to reduce to
number of dependencies.
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
This package has been renamed upstream to libllcp. Also, the current
package we have in Buildroot fails to compile due to a version bump of
it's main dependence, libnfc. A version bump is required because this
package has been adapted upstream to work with libnfc-1.7.0-rc6.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the tcpreplay package to version 4.0.0. The upstream package has
a new maintainer and license. Version 4.0.0 brings a number of new
features see http://tcpreplay.appneta.com/ for details.
[Peter: drop autoreconf]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on the original new pkg patch submitted last Jan
and is part of the "Patchwork oldest patches cleanup #5". It combines
the original "[1/2]/[2/2] new package: python-posix_ipc" patch files.
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CA certificates used for SSL based applications. The package installs CA
certificates to /usr/share/ca-certificates and creates symbolic links under
/etc/ssl/certs. For example, the existing libcurl package will use these
certificates for https urls. Based on the debian ca-certifcates package.
[Peter: fixup comments as pointed out by Yann]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since default configure options for host packages include
--disable-static, gcc was not configured to build static version of its
libraries (libgcc.a, libstdc++.a, ...).
This patch replace --disable-static by --enable-static in configure
command. Notice some options was removed sinces they was ignored by gcc
configure script.
Once it was compiled, this commit takes care to copy static libraries to
$STAGING
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
First switch the architecture availability to positive logic since it's
cleaner and avoids issues when new ones are introduced.
Then look at the source for the available ones at sysdeps/linux-gnu/...
aarch64 -> NULL
arc -> NULL
arm -> hardcoded to little endian, so no armeb
avr32 -> NULL
blackfin -> NULL
microblaze -> NULL
mips -> little/big endian handled but not for 64 bits
nios2 -> NULL
ppc -> OK
sh -> NULL
sparc -> OK
x86 -> Both i386 and x86_64 handled
xtensa -> NULL
Fixes:
http://autobuild.buildroot.net/results/cd2/cd24e7b6f863ab413d76ca7a81bd357ddf1dc4f7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Trace and replay OpenGL and OpenGL ES APIs calls to/from a file.
http://apitrace.github.io/
[Peter: fix Config.in, depend on glibc, use github helper]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dtc package has hardcoded shared lib link options in the Makefile, so it
will fail if you try to build it on a static lib environment.
[Peter: Move comment under _PROGRAMS suboption for proper indentation]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openssl 1.0.1f Makefile.org doesn't quote $(CC) when passing the
parameter in another invocation of make, hence breaking when the
compiler string contains a space with multiple strings (for example with
ccache).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A custom skeleton may include /etc/issue and/or /etc/hostname, in
which case we do not want to override them.
But those files could also be missing from the custom skeleton, or
the user may want to override their content.
Update the documentation to make it clear that the user can set these to the
empty string to make buildroot not create/overwrite these files.
[Peter: drop the different default values depending on skeleton]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
[yann.morin.1998@free.fr: change from hiding it behind SKELETON_DEFAULT
to use conditional default values; move below the skeleton choice;
improve help entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To test for the google.protobuf presence, ola's ./conifgure runs the
host Python. This is doomed to fail, as google.protobuf is installed
in target/ and not in host/
Since our dependencies ensures that google.protobuf is indeed installed
before we attempt to configure and build ola, we can just ditch the
test altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to install a default localtime.
since tzdata only makes sense for (e)glibc, we don't care
that we install timezone files that uClibc can't understand.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In our wrapper, we forcibly add the -march=, -mcpu= and-mtune= flags
to the actual compiler, this in an attempt to always generate correct
and optimised code for the target.
But in some cases, the caller knows better than we do, and passes its
own set, or subset of those flags. In this case, some may conflict with
the ones we pass. The most prominent offender being the Linux kernel.
For example, on the ARM Raspberry Pi, the Linux kernel will set the
-march=armv6 flag and no -mcpu= flag, but we pass -mcpu=arm1176jzf-s,
which conflicts:
drivers/scsi/scsi_trace.c:1:0: warning: switch -mcpu=arm1176jzf-s
conflicts with -march=armv6 switch
(and so for all the files the kernel compiles, pretty messy)
(note: arm1176jzf-s is not an armv6, it is an armv6zk. Yeah...)
To avoid this situation, we scan our commandline for any occurence of
the possibly conflicting flags. If none is found, then we add our owns.
If any is found, then we don't add any of our owns.
The idea behind this is that we trust the caller to know better than
we do what it is doing. Since the biggest, and sole so far, offender
is the Linux kernel, then this is a rather safe bet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If either dhclient or dhcpcd are selected, network-manager is now
configured with the proper paths.
This allows 'dhcp=dhclient' or 'dhcp=dhcpcd' to be set in
/etc/NetworkManager/NetworkManager.conf.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU/Linux distributions usually install dhcpcd in /usr/sbin.
NetworkManager will look for it in this directory.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport a patch from upstream to fix a conflict between glibc
headers and recent kernel headers (v3.10 or newer).
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: don't try to generate manpages even if host has asciidoc]
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script / Makefile forgets to link with some of the dependent
libraries breaking static linking, so help it along.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove all patches needed for pre-autotools minidlna release
- convert .mk file to autotools-package
- disable broken static build
- compile-tested only with ffmpeg 1.2.4 (see other patch)
[Peter: fix license filename]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove patches applied upstream
thanks to Jerzy Grzegorek for the hint
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cset 7a58a4e (e2fsprogs: bump to version 1.42.9) broke the generation
of ext4 filesystems.
This is because, in ext4, some metadata are dependent on the UUID.
If changing the UUID of an ext4 filesystem, tune2fs now exits with
exit-code 1, and prints a message to run fsck, to avoid trashing the
filesystem.
This condition is of utmost importance on a mounted filesysten (which
is not our case) to avoid corruption (yes, it is possible to change
the UUID of a mounted filesystem).
But the error is not valid for us, since we are working on an unmonted
filesystem image in the first place.
Since we change the UUID after we convert the filesystem (to ext4),
tune2fs just bails out.
We can not just ignore the exit code of tune2fs, since we still want
to catch any other failure.
It turns out that, changing the UUID before converting the filesystem
is just the way to go.
Fixes#6752.
Reported-by: Daniel Mentz <daniel@exxm.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Daniel Mentz <daniel@exxm.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most of the dependencies listed were optional or only indirectly needed
(E.G. the xproto ones), so don't select them.
Further more, the optional xcomposite and xinerama dependencies were missing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These have to be bumped together as new libxcb requires new xcb-proto, and
old libxcb doesn't build with new xcb-proto.
[Peter: fixup xcb-proto.pc instead of playing tricks with --define-variable]
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop some patches:
- glibc 2.17 and 2.18 are now supported by upstream
- coregrind/link_tool_exe_linux.in has been reworked and should now
support ccache
[Peter: drop unneeded AUTORECONF as configure.in no longer gets patched]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the manual uses the last modification date and time of
manual.txt in the generated manual.
This is confusing, especially for long-checked-out repositories where
the top-level manual.txt has not changed since the check out. Moreover,
the manual explicitly states 'generated on', which is confusing at best.
Use the current date and time instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.11 release of gpsd still hasn't materialised. For now, bump the Git
snapshot again, removing local patches that have now been merged upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Provides command line access to almost all the features defined in
the EWMH specification. It can be used, for example, to get
information about the window manager, to get a detailed list of
desktops and managed windows, to switch and resize desktops, to
make windows full-screen, always-above or sticky, and to activate,
close, move, resize, maximize and minimize them.
[Thomas:
- fixed license, which is GPLv2+, not GPLv2
- fixed wrapping of the Config.in help text
- removed Config.in comment related to MMU dependency.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the Git snapshot for the cppzmq package. The newer snapshot now
has a separate license file; update license information accordingly.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apache licenses are referred to in a variety of ways; standardise these,
choosing a form which does not contain whitespace.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default port 22 used by dropbear for its SSH connections is not always
desired. Dropbear accepts an option '-p' to set the port, but doing this was
not possible from the buildroot-provided init script.
One way to fix this is by adding a custom S50dropbear in a project-specific
rootfs overlay. However, this approach has the big disadvantage that bug
fixes or improvements in the default init script (i.e. in newer buildroot
releases) are not available (unless you manually port these changes each
time you upgrade buildroot).
Another solution is to modify the default init script from a
project-specific post-build script. However, this is fragile because you'd
have to sed some line but this line may change in later buildroot releases.
Yet another solution is to change the default port at build time, by
patching the options.h header file in the dropbear sources. This was
proposed with a patch [1] before, but not accepted.
This patch implements another solution, hinted from the discussion in [1]:
the default init script now sources a config file /etc/default/dropbear, in
which the user can set the variable DROPBEAR_ARGS. This is similar to the
S81named init script in the bind package. The config file would be added to
a project-specific rootfs overlay, a custom skeleton, or created from a
post-build script.
This approach has the advantage of being simple and non-intrusive, without
any code duplication or fragile script modifications.
[1] http://lists.busybox.net/pipermail/buildroot/2013-November/083165.html
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iozone code uses the pthread_setaffinity_np() function, but with
uClibc this function is only available when the NPTL thread
implementation is used. Some architectures, such as AVR32 and ARC do
not support the NPTL thread implementation, and therefore lack the
pthread_setaffinity_np() function.
This commit adds a patch that provides an empty implementation of
pthread_setaffinity_np() when we're using uClibc, but not with the
NPTL thread implementation. The reasoning is that there is a very high
chance that the few architectures that do not implement NPTL are
non-SMP architectures, and therefore setting the affinity is not very
useful.
In addition to this, this commit:
* Renames the existing patch to use a sequence number, in order to
guarantee a proper ordering when applying patches.
* Removes the Kconfig dependency on !uClibc 0.9.31, which was
introduced to prevent AVR32 from failing due to the
pthread_setaffinity_np(). This conditional is no longer necessary
due to the new patch, and the conditional was anyway not completely
working since it was not taking into account the case of external
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Xilinx Microblaze external toolchains that we had support for are
very old, and are causing a huge number of build issues. Thanks to
Spenser Gilliland, we now have support for Microblaze in the internal
toolchain backend, and the autobuilders have been using the internal
toolchain backend since then. Therefore, it's time to deprecate those
old and unusable external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Linaro ARM 2013.10 and Linaro ARM 2013.11, and remove Linaro ARM
2013.07 and Linaro ARM 2013.08.
The main change for those versions is the switch to eglibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for the recently release Sourcery MIPS
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery MIPS 2012.03 toolchain.
While we're at it, also fix the incorrect help text related to the
MIPS64 multilib selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When Grub is built with splashscreen support, copy the splashscreen
image to the ISO9660 filesystem. Otherwise, disable the splashscreen
in the grub menu.lst file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When one enables the generation of a cpio archive of the root
filesystem, the most likely usage is as an initramfs for the
kernel. This commit ensures that the kernel has initramfs support when
the rootfs cpio image format is chosen.
This will for example ensure that if the user selects the ISO9660
filesystem format (which uses a cpio initramfs), the kernel will have
proper support to load and use the initramfs.
It is worth mentionning that when BR2_TARGET_ROOTFS_INITRAMFS is
enabled, then BR2_TARGET_ROOTFS_CPIO is always enabled. That's why we
move the enabling of CONFIG_BLK_DEV_INITRD from the initramfs case to
the cpio case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds the support for the recently release Sourcery ARM
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery ARM 2011.09 toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When using initramfs built into the kernel, it is useless to put an
initrd in the iso image. This patch makes the image to only contain
the kernel image, and also removes the initrd line from menu.lst
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the Xtensa architecture uses the "snapshot" version of
uClibc. This means that the build is not reproducible, since it will
pick whatever latest version of uClibc is available at the moment of
the build.
This commit replaces that by adding a special Xtensa version, which
points to a well-known Git commit. This is something we should
hopefully be able to remove once the uClibc people realize that doing
a 0.9.34 release would be useful.
Should probably fix:
http://autobuild.buildroot.org/results/5d6/5d6072a038acf894d832704e36c1d43f0254abf5/build-end.log
at least I wasn't able to reproduce the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[baruch: use a more recent uClibc version]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When BR2_TARGET_GRUB_SPLASH is enabled, we were passing
--enable-graphics, but when it was disabled, we were not doing
anything. However, in Grub, graphics support is enabled by default,
and you have to pass --disable-graphics to disable it.
Fix this by passing --enable-graphics or --disable-graphics as
appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The fs/iso9660 logic assumes that the Grub bootloader is
used. Therefore, it should make sure that Grub is configured with the
support for the ISO9660 filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In 1cece2813b (grub: add option to
configure the list of supported filesystems), we introduced the
BR2_TARGET_GRUB_FS_SUPPORT option which allows to provide a
space-separated list of filesystems that Grub should support.
However, it turns out that this not very practical, because the
iso9660 filesystem logic in Buildroot should force the ISO9660 support
to be enabled in Grub, which is not easy to do with a string option.
Therefore, this patch changes this option from a string option to a
list of boolean option, one per filesystem supported.
A few useful details:
- Since Grub legacy is dead, the list of filesystem, and therefore
the number of options, will not grow.
- We have only added options for filesystems that are likely to be
used in an embedded Linux context. Filesystems such as VSTAfs,
Minix, UFS2 or FFS2 are not supported.
- There is no need to add some Config.in.legacy support for the
previous option, since it was added after Buildroot 2013.11, and
was therefore never part of an official Buildroot release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to a change to the configuration options of the
supported filesystem in Grub, enclose the network driver options in a
sub-menu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The ISO9660-specific Grub menu.lst contains two entries: one entry to
chainload the bootloader available in the first hard drive, and
another entry to boot the Buildroot system.
However, it defaults to booting the first entry, i.e chainloading
what's on the first hard drive. For a Buildroot generated system, this
is quite odd: we're not even booting the system built by Buildroot.
So, switch the two entries, and put the Buildroot boot entry first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the graph of the complete dependency tree by calling:
make graph-depends
It's also possible to generate the graph-depends for a single package:
make PKG-graph-depends
The graphs are generated in $(O)/graphs/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script generates graphs of packages build time, from the timing
data generated by Buildroot in the $(O)/build-time.log file.
Example usage:
./support/scripts/graph-build-time \
--type=histogram --input=$(O)/build-time.log --output=foobar.pdf
Three graph types are available :
* histogram, which creates an histogram of the build time for each
package, decomposed by each step (extract, patch, configure,
etc.). The order in which the packages are shown is
configurable: by package name, by build order, or by duration
order. See the --order option.
* pie-packages, which creates a pie chart of the build time of
each package (without decomposition in steps). Packages that
contributed to less than 1% of the overall build time are all
grouped together in an "Other" entry.
* pie-steps, which creates a pie chart of the time spent globally
on each step (extract, patch, configure, etc...)
The default is to generate an histogram ordered by package name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: adapt to the format of the step-hooks build-time.log,
add sort order by name, default to name-ordered histogram, use our colours
for pie-charts, add alternate color-scheme, add short-options, add
--input/-i]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use the autotools-package infrastructure, since the package uses an
autoconf configure script.
- remove uninstall and clean commands since those are no longer
supported by Buildroot.
- rewrap the help text.
- order alphabetically the package in package/Config.in]
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove empty newline at the end of Config.in
- use lowercase for the package name in the comment header
- reword the comment explaining why autoreconf is needed
- add optional dependency on libftdi, which avrdude can use
- remove avrdude.conf.bak file from /etc]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch update the patch for kernel's kconfig to add remaining
'kernel' mention.
It also applies this patch to buildroot's kconfig.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since some time, we have removed the support to build a toolchain for
the target, and therefore the support for several development tools on
the target.
This commit deprecates a few additional development tools: m4, bison,
flex and gob2. For flex, we retain the ability to build libfl, we only
deprecated the ability to build the flex binary itself.
The original motivation for this patch is that m4 is causing build
issues in some configurations, but there isn't really much incentive
to fix this package for the target, since it is not really useful for
embedded Linux systems.
Bison, Flex and Gob2 are deprecated because they are reverse
dependencies of m4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Changes snmp++v3.3.2
====================
- Fixed: Regression through [APP-19] which lead to too long timeouts
on systems with clock_gettime.
- Fixed: Restored missing files (CHANGES, READMEs) to distribution.
- Fixed: Fixed compilation error when using poll syscall.
- Fixed: Do not use _vscprintf as it is not portable, instead just
truncate the log message.
- Fixed: Fixed test that produced an error during configure:
checking which _XOPEN_SOURCE macro must be defined...
./configure: line 6229: test: : integer expression expected
- Fixed: msec.cpp: timezone is a struct and not a class.
Changes snmp++v3.3.1
====================
- Fixed: Replaced strcasecmp usage in consoleExamples by _stricmp
for WIN32 platform.
- Improved: Debug output buffer length is now computed exactly on
WIN32.
- Fixed: Compilation of IPv6Utility.h with Visual Studio 2013.
- Fixed: Removed #define of Uint32 in eventlistholder.h.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the ARM Config.in logic specifies values for
--with-arch/-march and --with-tune/-mtune, but not for
--with-cpu/-mcpu. However, this causes problems on ARMv4, because
specifying --with-arch=armv4t isn't enough to make gcc generate ARMv4
code: one should also pass --with-cpu=<some ARMv4 CPU>.
Moreover, since Buildroot is generally designed to generate code
specifically for the configured target, it makes sense to give our own
--with-cpu/-mcpu value instead of relying on the default value used by
gcc, and only do small optimizations with -mtune.
Reported-by: Adam Hussein <kryme76@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
aiccu uses the dn_skipname() function, which was only introduced in
uClibc 0.9.33. Therefore, we disable this package when uClibc 0.9.31
and 0.9.32. Most likely, only AVR32 users will be affected by this, so
we don't add a specific kconfig comment for that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
The old and new URLs are equivalent, but the new URL is not specific
to an older version of libmpd, which seems more logical.
[Thomas: update commit log.]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also switch to github helper and install sample configuration file mode
600 - o+r is really bad for password-bearing configuration files.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the license files for the many firmware files are installed
in the target, alongside the firmware files, and are not available to the
legal-info infrastructture.
This patch separates the license files from the firmware files, and makes
them available to the legal-info infrastructure, so they get installed
with all the other license files.
Since most firmware files are proprietary (at least those we currently
install), we just have a single license definition. When we later support
other firmwares that have an OSS license, those can add their own
licensing information on a case-by-case basis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to the latest /stable/ linux 3.10.y for the Raspberry Pi defconfig.
Brings in quite a few bug-fixes (now based on 3.10.25), and a few
(minor) improvements (add DAC support).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fio program uses posix_madvise(). However, posix_madvise() is only
available in the Git tree of uClibc, and in Buildroot's version of
uClibc 0.9.33, thanks to the huge number of backported patches that we
carry.
Therefore, trying to build fio with an external uClibc toolchain is
most likely going to fail (as the uClibc version is most likely an
official stable release, and no stable release of uClibc ever had the
support for posix_madvise()). And similarly, building fio with uClibc
0.9.31 and 0.9.32 is always going to fail. We disable those use cases
to avoid repeated autobuilder failures.
No kconfig comment has been added, because we don't have a
well-defined way of specifying such exceptions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems weird that the libegl package has to know all of the packages
that may provide the EGL implementation.
This also breaks implementation provided by packages in BR2_EXTERNAL,
since we can't easily depend on the order of packages before we can
derive the dependencies of libegl.
So, Arnout and I separately came up to the same conclusion: move the
dependency selection from out of libegl, and into each of the packages
that provides an EGL implementation. Here it is.
Since we no longer depend on the order packages are included, but on
values set at Kconfig-time, we can now have EGL providers in BR2_EXTERNAL.
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are places in Qt's source where headers included with the name of
the module subdirectory (e.g. #include <QtCore/QHash>). Therefore, the
build system passes the top header directory to the compiler; but this
results in a error when building host tools since sysroot/usr/include
directory includes architecture specific system headers.
In order to prevent this, install all Qt headers into a subdirectory in
/usr/include.
Fixes: http://autobuild.buildroot.net/results/4f1/4f16c0b38bdd6e40efcc781c12fae81c0bfabb72/
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following patch enables the generation of static libraries
additionally to the shared ones for the netsnmp package.
[Thomas: fixed commit log.]
Signed-off-by: Andreas Ehmanns <universeii@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updating the documentation to reflect that multiple directories can
now be specified for BR2_GLOBAL_PATCH_DIR. Along with giving an
example use case of how to use multiple global patch directories.
[Thomas: fix minor typo mentionned by Thomas De Schampheleire.]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add largefile and thread dependencies, bump to version 2.1.4,
use upstream Git instead of Debian tarballs, adjust license
information]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes since 2.6.16:
* [FIX] redis-cli: fix big keys search when the key no longer exist.
* [FIX] Allow AUTH / PING when disconnected from slave with serve-stale-data on.
* [FIX] redis-benchmark: update help for new __rand_int__ form.
* [FIX] Fix broken rdbWriteRaw() return value check in rdb.c (harmless).
* [FIX] Log to what master a slave is going to connect to.
* [FIX] Only run the fast active expire cycle if master & enabled.
* [FIX] Fixed a replication bug involving 32 bit instances and big datasets
hard to compress that resulted into more than 2GB of RDB file sent.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pycrypto package contains a LICENSE.orig file, but apply-patches.sh
removes all .orig file, so we can't list a .orig file asa license file,
as it would have disapeared by the time 'make legal-info' sould be called.
Add a post-extract hook that renames this license file, so it is renamed
just before we apply patches and remove .orig files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New for 3.4 series:
* SSL Server Certificate Validator
* Multicast DNS
* Transaction Annotations
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a check for BR2_PACKAGE_ELFUTILS; if this is enabled, then try to link
against libelf from the elfutils package. This allows ktap to resolve
symbols in userspace.
The new FFI functionality in ktap is not exposed, as it currently only
supports x86_64...
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for MIPS64 BigEndian platforms and has already
been merged upstream:
cea101bd10
Now we can remove the restriction on the Config.in to disable the
selection of this packages on MIPS64 BigEndian platforms.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5webkit is not currently supported on MIPS64 platforms, so disable the
possibility of selecting this package in that platform.
In the future the following changes would be needed to fix this problem:
A new Source/JavaScriptCore/assembler/MacroAssemblerMIPS64.h file needs
to be created in order to add support for MIPS64 and MacroAssembler.h
needs to be modified to include that file in case of CPU(MIPS64).
Also Source/WTF/wtf/Platform.h and Source/WTF/wtf/dtoa/utils.h need to
be modified to add MIPS64 support.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes since v1.8.5.1:
* "git diff -- ':(icase)makefile'" was unnecessarily rejected at the
command line parser.
* "git cat-file --batch-check=ok" did not check the existence of
the named object.
* "git am --abort" sometimes complained about not being able to write
a tree with an 0{40} object in it.
* Two processes creating loose objects at the same time could have
failed unnecessarily when the name of their new objects started
with the same byte value, due to a race condition.
Also contains typofixes, documentation updates and trivial code clean-ups.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using ld may cause a link failure due to using the default emulation
linker which is configured when building the linker in binutils. Using
gcc instead will pass the appropriate -m value because the compiler
knows the ABI you are using.
Here is an example of the failure:
ld: .libs/libdirectfbwm_sawman.a.tmp/sawman_wm.o: ABI is incompatible
with that of the selected emulation
ld: failed to merge target specific data of file
.libs/libdirectfbwm_sawman.a.tmp/sawman_wm.o
ld: Attempt to do relocatable link with elf64-tradbigmips input and
elf32-tradbigmips output
ld: .libs/libdirectfbwm_sawman.a.tmp/sawman_wm.o: file class ELFCLASS64
incompatible with ELFCLASS32
ld: final link failed: File in wrong format
Fixes:
http://autobuild.buildroot.net/results/e4b/e4b77681a44626efa2a44627604630697e785086/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-Merge the current blackbox-0.70.1-configure.patch to a new one named
blackbox-001-Fix-configure-ac.patch that will patch configure.ac instead
and also will add -lpthreads to LIBS to fix a linkage problem.
-Force autoreconf to generate the new configure script using the new
patched configure.ac file.
Fixes:
http://autobuild.buildroot.net/results/a97/a979cc079706be2012fb4b6c72894aca636adfb6/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes building on mipsel possible (hard-float variant only).
[Peter: also adjust dependenciess for comment]
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, the package would overwrite busybox' binaries even
if Busybox was set in the config as the default init system.
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add /dev/hvc* devices, and add them to securetty. These
are required for ppc64 virtual consoles.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Certain tracing related options are required to be able to build ktapvm.ko, enable those.
Enable CONFIG_FUNTCTION_TRACER as otherwise, CONFIG_EVENT_TRACING won't stick. (Some
tracer needs to be enabled for this).
[Peter: add a note to ktap Config.in explaining this is done]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpcap would fail to initialize on Linux when compiled against kernel
headers with TPACKET_V3 support but running on kernel without:
"can't get TPACKET_V3 header len on packet socket: Invalid argument"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
E.G. for toolchain-buildroot / toolchain-external. Now these packages are
correctly handled by make source / external-deps.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source-check / external-deps make targets ends up calling recursively
into buildroot's Makefile, causing make to display a warning:
make[2]: warning: -jN forced in submake: disabling jobserver mode.
We don't support toplevel parallel make, so get rid of the warning using
MAKE1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no perf_events support in the kernel for avr32. The oprofile
package makefile hard codes the list of binaries to install. Unfortunately,
this hard-coded list contains pe_profiling/operf, which is only built when
perf_events support is available.
Fixes autobuild failures such as the following.
http://autobuild.buildroot.net/results/492/492659bc252395a62e62e6005ed0e86e582dcada/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove a local patch which has now been accepted upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments of packages that need a Linux kernel to be
built by buildroot, to the format:
foo needs a Linux kernel to be built
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the python packing a bit easier to use by providing a detailed error
message if <pkg>_SETUP_TYPE isn't set to a valid value.
At the same time adjust the error message used when <pkg>_SETUP_TIME isn't
set to list the exact variable name that should be set, and don't talk about
'Unknown' as it isn't printed when the variable isn't set (or is set to the
empty string).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: convert to the Python package infrastructure, added missing
dependency on C++, inherited from msgpack.]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: converted to the Python package infrastructure, added missing
libusb dependency in the .mk file, added missing newline in the
Config.in file, fix the package description]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the select of BR2_PACKAGE_PYTHON_SETUPTOOLS, since what is
really needed is host-setuptools (as can be seen from the original .mk
file), and not setuptools for the target.
Also, remove the mangling of the Python shebang, since it's now done
by passing the --executable= option at install time (done in the
Python package infrastructure).
Finally, convert the package to use <pkg>_INSTALL_INIT_SYSV.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, remove the "select BR2_PACKAGE_PYTHON_SETUPTOOLS", since
setuptools is a host dependency (needed to built the package), not a
target dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erlang builds two emulators depending on whether SMP is supported or
not. If it is known that the target does not support SMP, turning off
the SMP emulator saves compile time and reduces the size of the
installation.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building for avr32, the build fails as follows.
cc1: error: unrecognized command line option "-Wno-packed-bitfield-compat"
An example of an autobuild failure arising from this is the following.
http://autobuild.buildroot.net/results/92e/92e472004812a3616f62d766a9ea07a997a66e89/
Clearly, not all toolchains provide a gcc that understands
the -Wno-packed-bitfield-compat flag; remove usage of this flag.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps gets us:
- support for the v4l2 driver
- fix latencies in vdec3 (h264 decoder)
- fix incorrect frame presentation in de-interlacing filter
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useful for for-build scripts to call parted, eg. to generate
partition tables and such automatically.
Since the primary goal is to use parted within scripts, we
do not need readline, so it is forcibly disabled.
Also, it does look unlikely that we need to manipulate LVM
volumes, so we forcibly disable support for the device-mapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
parted can be configured without support for LVM volumes, so
we can relax the dependency on lvm2, and make it an optional
feature.
Remove now no-longer needed dependency on MMU because of lvm2.
(Based on a code-snippet from Thomas.)
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the ChangeLog, spice needs glib2 since 0.12.2.
Thus add libglib2 dependency to fix build error if !BR2_PACKAGE_LIBGLIB2.
Also add a patch to fix trivial build error.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some boards are configured in u-boot to store multiple redundant copies of
the environment image in flash. For these boards, it is required to pass
the -r flag, when generating a boot environment image using mkenvimage.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to enable support for sending debug messages
to syslog instead of stdout.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.11 release of gpsd is imminent; in the meantime, backport some patches
from upstream to fix some of the autobuild failures.
Also bump to the most recent Git snapshot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libglib2 can fail to build for arm, with the following error.
gatomic.c:668:2: error: #error G_ATOMIC_LOCK_FREE defined, but incapable of lock-free atomics.
The following upstream commit fixes the problem.
commit 996edb0c46356d8a326f886b91a77a6af9a2de3e
Author: Antoine Jacoutot <antoine@mtier.org>
Date: Wed Aug 28 09:35:27 2013 +0200
fix atomic ops detection
AC_TRY_LINK should be used instead of AC_TRY_COMPILE because the code
will compile everywhere, either producing ``atomic'' code, or an
external reference to __sync_bool_compare_and_swap.
https://bugzilla.gnome.org/show_bug.cgi?id=706958
The upstream commit went into version 2.37.7, so this is the lowest version
that we can bump to, in order to fix the atomic operations problem. However,
2.37.x is a development version, so we bump to 2.38.2 instead.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upgrade to latest stable release.
Release 0.24.4
core:
* Fix regression in broken endstream detection. Bug #70854
* Catalog: sort entries of NameTrees to make sure lookup works. Bug #26049
* Don't infinite loop if reading from GooFile::read fails. Bug #71835
utils:
* pdftotext: Do not close stdout. Bug #71639
* pdftotext: Silence warning for may be used uninitialized variable. Bug #71640
* pdftotext: Escape the text of the xml headers
* Warn the user if he provides a wrong range
qt4:
* Fix typo in xml API. Bug #71643
qt5:
* Fix typo in xml API. Bug #71643
Release 0.24.3
core:
* PSOutputDev: Fix PFB font embedding. Bug #69717
* CairoOutputDev: Do not set an invalid matrix in drawImage(). Bug #70085
qt4:
* Don't crash if getXRef()->copy() fails
qt5:
* Don't crash if getXRef()->copy() fails
utils:
* pdfseparate: Allow only one %d in the filename. Bug #69434
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, the dialog package has a DIALOG_POST_CLEAN variable,
which doesn't match any of the variables understood by the
infrastructure. This commit gets rid of it.
This was noticed while reviewing the packaging of python-dialog.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make it clear to the user that these options are external to Buildroot
and no support is provided by the Buildroot community.
With this, there's no need to recommend people to their options inside
a menu, so remove that from the documentation.
Kconfig nicely allows us to hide the menu completely if BR2_EXTERNAL isn't
used, so make use of that to not confuse people. It would be nice if we
could add some help text to explain the BR2_EXTERNAL stuff as well, but
that isn't supported on menus :/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the BR2_EXTERNAL directory to contain Config.in and
Makefile code, which gets integrated into the Buildroot build logic:
- Buildroot automatically includes the $BR2_EXTERNAL/Config.in in the
top-level configuration menu.
- Buildroot automatically includes the BR2_EXTERNAL/external.mk in
the build logic, so it can for example be used to include other .mk
files that define package recipes.
This is typically intended to be used to create target packages in the
BR2_EXTERNAL directory, but can also be used for bootloaders, host
packages, or other custom make logic.
We also add a dummy Config.in file in support/dummy-external/ to
ensure that the source "$BR2_EXTERNAL/Config.in" line will point to an
existing file even when BR2_EXTERNAL is not used by the user.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces the BR2_EXTERNAL environment variable, which
will allow to keep Buildroot customization (board-specific
configuration files or root filesystem overlays, package Config.in and
makefiles, as well as defconfigs) outside of the Buildroot tree.
This commit only introduces the variable itself, and ensures that it
is available within Config.in options. This allows us to use
$BR2_EXTERNAL in a 'source' statement in Config.in.
Following patches extend the usage of BR2_EXTERNAL to other areas
(packages and defconfigs).
In details, this commit:
* Introduces the BR2_EXTERNAL Kconfig option. This option has no
prompt, and is therefore not visible to the user and also not
stored in the .config file. It is automatically set to the value of
the BR2_EXTERNAL environment variable. The only purpose of this
BR2_EXTERNAL Kconfig option is to allow $BR2_EXTERNAL to be
properly expanded when used inside Kconfig source statements.
* Calculates the BR2_EXTERNAL value to use. If passed on the command
line, then this value is taken in priority, and saved to a
.br-external hidden file in the output directory. If not passed on
the command line, then we read the .br-external file from the
output directory. This allows the user to not pass the BR2_EXTERNAL
value at each make invocation. If no BR2_EXTERNAL value is passed,
we define it to support/dummy-external, so that the kconfig code
finds an existing $(BR2_EXTERNAL)/package/Config.in file to
include.
* Passes the BR2_EXTERNAL into the *config environment, so that its
value is found when parsing/evaluating Config.in files and .config
values.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes an issue that occurs during the manual build process
which will occur when BR2_EXTERNAL is introduced.
During the package list generation, the python script using kconfiglib
module reads and parses the Config.in files. So, symbols, including
environment variables, got expanded and/or resolved. In
kconfiglib.py, this patch fixes the regex that did not allow to use
numbers in the environment variable names, so '$BR2_EXTERNAL' got
wrongly expanded like it was '${BR}2_EXTERNAL':
<snip>
>>> Updating the manual lists...
Traceback (most recent call last):
File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 375, in <module>
buildroot = Buildroot()
File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 216, in __init__
self.root_config))
File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 214, in __init__
self.top_block = self._parse_file(filename, None, None, None)
File "/opt/src/buildroot/master/support/scripts/kconfiglib.py", line 919, in _parse_file
return self._parse_block(line_feeder, None, parent, deps, visible_if_deps, res)
File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 1114, in _parse_block
self.base_dir))
IOError: /opt/buildroot/master/Config.in:490: sourced file "$BR2_EXTERNAL/Config.in" (expands to
"2_EXTERNAL/Config.in") not found. Perhaps base_dir
(argument to Config.__init__(), currently
"/opt/buildroot/master") is set to the wrong value.
docs/manual/manual.mk:2: recipe for target 'manual-update-lists' failed
make: *** [manual-update-lists] Error 1
</snip>
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently there are two different names of the minor version variable:
<PKG>_MINOR_VERSION and <PKG>_VERSION_MINOR
This patch unifies them to <PKG>_VERSION_MINOR
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently there are two different names of the major version variable:
<PKG>_MAJOR_VERSION and <PKG>_VERSION_MAJOR
This patch unifies them to <PKG>_VERSION_MAJOR
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: Propagate dialog dependencies, show comment if not available]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch away from the PyPI subset version since it has a great filename
clash with the full upstream apache version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The C code (fastbinary.so) wasn't built using the cross compiler, hence
it was unusable. Fix it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like for binutils, gdb versions pulled from Git want to
regenerate their documentation, and none of the MAKEINFO tricks we've
tried worked properly, so we're simply adding host-texinfo as a
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the binutils source code is pulled from a Git repository, a
number of generated files are not present, and need to be
re-generated. Those files are generated by flex, bison, and texinfo,
so we need to pull the corresponding dependencies.
Notice that we tried avoiding the texinfo dependency by doing a number
of MAKEINFO tricks, but none of them worked properly, so we've instead
chosen to depend on host-texinfo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows to build an internal toolchain for the Microblaze
architecture, with either glibc or eglibc.
Note that we add an explicit list of architectures that are supported
by uClibc, and Microblaze is not part of them, because it currently
doesn't build for this architecture.
[Thomas: add better commit log, add architecture dependencies on
uClibc, to avoid selecting uClibc on Microblaze]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to make it easier to cope with changes in github download-URL's,
this patch introduces the github helper function. It generates the site
URL of a github repository. It's usage is $(call github,user,pkg,version).
[Thomas: extracted from Mischa original commit, macro moved to
pkg-download.mk]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch "pandaboard: Fix defconfig build" locked the
default pandaboard kernel to 3.8.11. This is inconvenient,
since the boot process has changed since kernel > 3.8.
Update the default kernel to 3.12.2 and fix the boot image
configuration, but remain compatible with legacy U-Boot
versions by using appended flattened device tree uImage.
This change *should* keep future kernels compatible with a
fixed U-Boot version.
Note the default device tree is now for the pandaboard-ES,
so users of other board revisions will need to set the
correct DTS_NAME.
[Peter: use custom kernel headers version (3.12.2)]
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new 'stable' branch of the Raspberry Pi kernel is now based
on the Linux 3.10 branch (currently 3.10.22), so bump both the
kernel version for the toolchain headers, and for the target.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python saves a pre-compiled support/scripts/kconfiglib.pyc file
side-to-side with the corresponding .py file.
This does not work if the Buildroot source tree is read-only (but
this is not an error for Python, which keep going OK).
But this may cause issues for out-of-tree builds in case the same
Buildroot source tree is shared by many builds.
Also, 'make clean' currently does not clean this file, and out-of-tree
builds can remove it either, at the risk of causing issues for other
out-of-tree builds running at the same time.
Just tell Python not to generate .pyc files:
- call the script via python, don't use the sha-bang
- thus, make the script non-executable, and remove the sha-bang
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream patch (28d708c44bc47b56f6551ff285f78edcf61c208a) added support for
make-4.0 or newer. We backport this patch to allow glibc to build on hosts
running the latest version of 'make'.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For gpsd 3.10, the ubx scons option has been renamed to ublox. Update our
makefile accordingly.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, openssl defines three conditional hooks, but two do not
follow our coding rules:
- for PRE_CONFIGURE, the hook is defined in the if-block, but
the _HOOK variable is always set
- for POST_INSTALL_TARGET, the hook is always defined, but the
_HOOK variable is set in the if-block
Fix that:
- define the hook in the if-block
- assign the _HOOK variable in the if-block
At the same time, get rid of extra empty lines that make it more
difficult to read.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udev requires the epoll_create1 system call, which is not available on avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LFTP is a sophisticated ftp/http client, and a file transfer program
supporting a number of network protocols. Like BASH, it has job
control and uses the readline library for input. It has bookmarks,
a built-in mirror command, and can transfer several files in parallel.
It was designed with reliability in mind.
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Matthew Weber, Grub doesn't build on 64 bits build
machines, because the host compiler produces 64 bits binaries by
default, while Grub should be built 32 bits. Therefore, this commit
passes -m32 to the Grub CFLAGS, so that 32 bits binaries are always
produced.
Reported-by: Matthew Weber <mlweber1@rockwellcollins.com>
Cc: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to version 2013.62 with ECC support.
Switch the initscript to on-demand key generation and add systemd unit
file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes typos in the 'encode_password' function calls.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd service files don't need to be +x so switch the installation to
mode 644.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current stable release of Wireshark is 1.10.3. It supersedes all
previous releases. So let's upgrade to 1.10.3.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/73d736dd3c8a70358ef4b19a63dda46178cf8bf1/
Note that the propagation of the thread dependency to the oprofile
package is a little bit non standard, because oprofile selects libpfm4
only on the PowerPC architecture. So we ensure the thread dependency
is only enforced on PowerPC, and a separate comment is displayed when
thread support is not available, but the PowerPC architecture is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The alsa-utils configure script will use pkg-config if available,
so make sure that it is available.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since only one firmware is used to boot the Raspberry Pi, there is no
reason to install all of them.
Add an option to select what firmware to install.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current TOC level is set to 4, which does not mean 'a 4-level deep TOC',
but really means 'a TOC deep to the 4th level', with the first level being
level 0, which means we have:
12. Appendix
12.1. Makedev syntax documentation
12.2. Makeuser syntax documentation
12.3. Partition table layout description syntax
12.3.1. The global section
Properties for the global section
Which a bit too much. And yet, the fifth level is not shown, since we
don't have any! :-/
Limit the depth of the TOC to three levels, which is just enough to be
usefull, yet not cluttered by low-level titles.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some shell environments the EUID variable, which checks the
user id, is not defined. Use `id -u` instead.
This patch mutes the following error:
./board/cubietech/cubieboard/mkcubiecard.sh: 31: [: -ne: unexpected operator
Signed-off-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Arvid Picciani <aep@exys.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install syslogd/klogd to /sbin instead of /usr/sbin to really win over
busybox and avoid the ugly noise when booting without busybox installed.
Also drop uninstall hook and manpage installation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When busybox isn't installed symlink agetty->getty to make the default
inittab work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install PAM configuration files for su (with "su -" variant) and login
when the tools are enabled.
This finally fixes bug #5366 and now we can login with an util-linux
/bin/login.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install default "other" configuration file that denies everything not
handled by other specific configurations.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PERL=missing so as to avoid generating manpages with help2man that breaks
on many occasions (and it's pointless).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice that the license is quite special. It is basically MIT with the
difference that it only allows use for:
'research and educational purpose and without fee ... Use of this software
in whole or in parts for direct commercial advantage requires explicit
prior permission'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the information from oracle website, version 5.3.21 is no longer
available for download. Let's upgrade to version 5.3.28.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Add arpd support via the new berkeleydb compat option.
* Remove uninstall define.
* Install ifcfg if bash on the target is enabled.
* Misc cleanups.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add DB 1.85 compatibility layer option, it's needed for arpd in iproute2
and other old apps that haven't moved to the newer API.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Misc fixes and improvements all over the place, mostly fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a few shortcomings in the boot firmware:
- emmc pll clock issues
- audio underruns and chirps
- unload of sensor drivers (?)
- missing config.txt no longer borks the boot
- lockups during long exposures on the camera
- YUV-to-texture fastpath for the camera
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.
We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.
We use this option to:
1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
support of <fs> in Grub stage 2.
2) Install only the stage 1.5 that correspond to the selected
filesystems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the splashimage line in menu.lst only active when splashimage
support has really been enabled in the Grub configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two improvements to the menu.lst file:
* Do not enforce any video mode, let the kernel use whatever it wants
as the default, or let the user customize it when needed.
* Use /dev/sda1 instead of /dev/hda1. Nowadays, most hard disk
controllers are handled using libata, and therefore the disks are
visible as /dev/sd<X>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit brings a number of improvements to the grub packaging:
* It builds grub with the host compiler, which is needed so that we
can build a 32 bits grub even if the target architecture is
x86-64. To make sure we have a host compiler capable of generating
32 bits code, grub now selects the BR2_HOSTARCH_NEEDS_IA32_COMPILER
option. Building with the host compiler is done by cheating and
passing $(HOST_CONFIGURE_OPTS) in GRUB_CONF_ENV.
* Some additional CFLAGS are added to make sure grub builds properly
with modern compilers (-O0, --build-id=none, -fno-stack-protector).
* Removal of the GRUB_INSTALL_STAGING_CMDS which were not used, since
GRUB_INSTALL_STAGING was not set to YES.
* Installation of the "grub" binary in $(HOST_DIR) instead of
$(TARGET_DIR) since it's actually used only on the host to install
grub into an image or device.
* Removal of the grub uninstall commands, since they are generally
considered useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some bootloaders (such as Grub) need to be built for x86 (i.e IA32)
even if the target architecture is x86-64. However, when the target
architecture is x86-64, the cross-compiler generated by Buildroot is
not able to generate 32 bits code.
To solve this, we will rely on the host compiler being a x86 + x86-64
compiler. Therefore, this commit introduces the
BR2_HOSTARCH_NEEDS_IA32_COMPILER option, which tells the dependency
checking logic to verify that the host compiler is indeed capable of
building x86 32 bits code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dbus-python requires xml.parsers.expat, which is provided by the pyexpat
module. This patch enables the pyexpat module as a dependency when dbus-python
is selected.
[Peter: fixup whitespace]
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This libtool change ensures that ld uses the right machine emulation file,
which will allow to fix several MIPS64 n64 link failures, such as the one
currently visible on the libiscsi package. Packages affected by this
problem will have to use <pkg>_AUTORECONF = YES to benefit from this libtool
fix, until they are fixed upstream.
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5base fails to compile on MIPS64 BigEndian n64 platforms because there
are multiple calls to some functions that are disabled. Since every Qt5
package depends on qt5base we can disable Qt5 entirely. This is a quick
fix for the next release. In the meantime, a proposed patch to fix this
problem has already been sent to Qt:
https://bugreports.qt-project.org/browse/QTBUG-35228
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For now, it doesn't use ccache when compiling host tools (e.g. qmake).
It seems the fix is not trivial.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Simplify our custom qmake.conf:
- Include linux_device_{pre,post}.conf to inherit common device
configuration.
- Do not add $(STAGING_DIR)/usr/include to include path. It is
redundant.
In additon to the simplification of code, this change is a preparation
to solve problems occurring when QMAKE_CXX is prepended with ccache path.
Upstream patch is needed by configure to parse device options correctly.
Another upstream patch is needed to remove ARM specific parts from
linux_device_post.conf.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Slim down the kernel config, switch to ext4 (with ext2/3 support),
enable N32 & O32 ABI compatibility for extra testing goodness and enable
keyboard & mouse support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc only works well for O32 ABI on mips64, so default to eglibc that
works just fine with N32 & N64 ABIs as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package selects BR2_PACKAGE_QT_SCRIPT which is not supported on
certain platforms. To prevent this behaviour we use the same solution as
we applied for BR2_PACKAGE_QT_SCRIPT
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BINDIR is used to point systemd/dbus service files to the correct binary
path where wpa_supplicant resides.
So define it to avoid the default /usr/local path that doesn't work.
Solves bug #6704
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_LVM2_DMSETUP_ONLY is a "negative" option that disables
build and install of part of the suite. This option cannot be unselected
by other config options, which gives a problem for BR2_PACKAGE_UDISKS_LVM2:
it needs BR2_PACKAGE_LVM2_APP_LIBRARY, which requires the full suite.
Therefore, replace the negative BR2_PACKAGE_LVM2_DMSETUP_ONLY by a positive
BR2_PACKAGE_LVM2_STANDARD_INSTALL. To make sure that existing defconfigs
keep working, the new option defaults to y unless the legacy
BR2_PACKAGE_LVM2_DMSETUP_ONLY was selected.
Fixes http://autobuild.buildroot.net/results/ea4627cae45e972ebba5b33a2b2871ce7f46fedc/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are carrying support for a couple of configuration options which
are no longer present in connman. Specifically:
; threads: vestigial configuration option needed for defunkt WiMAX plugin
; ntpd: plugin no longer present in connman
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The profiling support is not available on AArch64, causing build
failures such as:
http://autobuild.buildroot.net/results/724f8646e1c2c28cf187f2313244d1e3e61b4c25/
According to Will Newton, function profiling will only be added in the
next version of the AArch64 Linaro toolchain. This indicates it is a
rather new feature in AArch64, so for the moment, just disallow
profiling on AArch64. We can revise this later, when this feature has
been made available in Linaro toolchains, and official gcc releases
(for internal toolchain support).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply the latest Atmel patch for sam-ba version 2.12
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump connman to version 1.19; remove a local patch that is no longer
required, the code change having now been made upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Uses fork() in apr_proc_fork() which is used by almost all the packages
that use apr (log4cxx, subversion).
apr-util doesn't use fork or apr_proc_fork but it's of no use alone.
[Peter: also hide log4cxx comment if !BR2_USE_MMU]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pkg-autotools.mk already handles static/shared linking, so no need to
explictly force it. Worse even, the build fails with BR2_PREFER_STATIC_LINK
as we end up calling libtool with --static when it tries to link the .so,
breaking the build:
../ld: attempted static link of dynamic object
`../opcodes/.libs/libopcodes.so'
collect2: error: ld returned 1 exit status
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a rare edge build failure when iconv is enabled, easily reproduced
in a debian chroot with an aarch64 external toolchain with iconv +
xmlrpc support enabled with a php cgi + cli target.
Should solve bug #6500.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Startup script fails to restart the service: 1s delay is enough to fix
this.
Also apply a minor fix of the script name in the usage string
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If glib2 is compiled with the system PCRE instead of the included
copy, then that system PCRE needs to have support for UTF-8 and
Unicode properties enabled. Otherwise you will get such warnings
at run-time:
GLib-CRITICAL **: PCRE library is compiled without UTF8 support
GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow to compile PCRE with UTF-8/16/32 support and with
support for Unicode properties.
[Peter: whitespace fix]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mongoose fails to start because the options used are not supported by
mongoose. Fix it by using the correct option names instead.
[Peter: reworded commit text and use the correct long options instead]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
But not the octave development package:
checking for octave... octave
checking for mkoctfile... configure: error: mkoctfile is not installed
We don't need octace support, so fix it by explictly disabling it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ships configure thus fixing the breakage from the automake bump
to version 1.14 with AUTORECONF, with the added bonus of being faster.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
beecrypt does not properly handle its dependency on openpm, so that
applications using libbeecrypt are not aware that they also need openmp
(libgomp). This causes error messages during linking, such as (rpm):
..-gcc [..] -lbeecrypt -lbz2 -lz -lpopt -lpthread
libbecrypt.so: undefined reference to `GOMP_sections_end_nowait'
libbecrypt.so: undefined reference to `GOMP_parallel_end'
libbecrypt.so: undefined reference to `GOMP_sections_next'
libbecrypt.so: undefined reference to `GOMP_parallel_sections_start'
Because the openpm dependency of beecrypt is only used by rsa.c, to
parallelize the calculation of RSA cyphers, we can simply disable openmp in
beecrypt instead of trying to fix the way -lgomp is passed.
Fixes http://autobuild.buildroot.net/results/bcf/bcff4b81bfbb1191f97317b0945c74d948c9774b/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems pointless to disable even the default optimizations.
If at all this should be made dependant on the values of the
BR2_OPTIMIZE variables.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If glib2 is compiled with the system PCRE instead of the included
copy, then that system PCRE needs to have support for UTF-8 and
Unicode properties enabled. Otherwise you will get such warnings
at run-time:
GLib-CRITICAL **: PCRE library is compiled without UTF8 support
GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow to compile PCRE with UTF-8/16/32 support and with
support for Unicode properties.
[Peter: whitespace fix]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gets rid of a large number of warnings (and suboptimal code?):
..sysroot/usr/include/features.h:209:5: warning: #warning requested
reentrant code, but thread support was disabled [-Wcpp]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/bab/bab68bcf8714f215ac0b0c2546fa06608377fbb0/
This package is only supported on MIPS32 platforms. The mips-32.S file
included in the source code of this package only makes sense to be compiled
for MIPS32, and also contains hardcoded MIPS32 instructions which are
illegal on MIPS64. Trying to compile this package on a MIPS64 platform will
end with a linkage failure due to undefined references.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The -Wno-unused-result option is not understood by the version of gcc used by the
avr32 toolchain. Remove the option from the compilation flags.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/e22/e22d94fca3eabb4e54d82af04319f17ad8e10c20/
The single existing patch for libroxml has been renamed to include a numerical
component for application order sorting. The existing patch has also been updated
to apply without fuzz.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the ola build uses -Werror, so let's pass
--disable-fatal-warnings to remove this and avoid build failures
caused by warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Deprecate old MIPS ISAs since they are rarely used anymore and they cause
multiple build problems for new packages
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lxc_checkpoint.c: In function ‘main’:
lxc_checkpoint.c:128: error: ‘O_LARGEFILE’ undeclared (first use in this function)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, if locale support was requested, vim would be built with NLS or
not depending on the build order. This patch now makes the dependency
explicit.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 924b8739da we no longer declare glibc and eglibc support as
experimental, so it shouldn't be mentioned in the help text anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix download url : isn't available on previous ftp, use an other one
instead
- add version according to source code version
- rename and clean patch according to patch policy
[Peter: adjust upstream URL in Config.in]
Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Revamp initscripts see bug #3601
* Trim whitespace
* Check for installed binary (dhcp-relay)
* Check for installed config (dhcp-server)
* Check for proper variable setup from the script (both)
* Add "FAIL" message when startup fails (blind OK isn't accurate)
* Add start/stop messages to dhcp-relay
Switch bool to "dhcp (ISC)" to keep in line with package sorting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename patches for uClibc version 0.9.31, for consistency with the general
patch naming scheme in Buildroot. Also remove a .avr32 extension from a patch;
this is not necessary, since uclibc 0.9.31 is unavailable on architectures
other than avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The legal-info utility functions where defined using two ways
util-foo = command-foo
and
define util-bar # parameter description
command-bar
endef
This commit changes these functions to use the second form for clarity and
additionally adds parameter descriptions on all functions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As far as I can tell enabling tcl support has no affect on the actual
library. Furthermore, wvstreams has been checking for/linking against
tcl 8.3 which has never been supported in buildroot as far as I can tell
(8.4 added in 2005). That being said there is clearly no reason to keep
this around.
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using ccache TARGET_CC is something like
ccache gcc
This causes problems in the pv build which attempts to
override LD because the command ends up being
make [...] LD=/tools/ccache /tools/gcc LDFLAGS="[...]
As a result, during the build phase it attempts to build
/tools/gcc which succeeds by doing nothing:
make[1]: Nothing to be done for `/tools/gcc'.
and during the install phase you get the real build which
errors out on the LD error this snippet was attempting to
fix:
ld -r -o src/library.o src/library/getopt.o \
src/library/gettext.o
ld: src/library/gettext.o: Relocations in generic ELF \
(EM: 40)
src/library/gettext.o: error adding symbols: File in \
wrong format
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Thomas Petazzoni, the uclibc 0.9.31 build fails for avr32:
In file included from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/kernel.h:4,
from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/netlink.h:4,
from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/rtnetlink.h:5,
from libc/inet/netlinkaccess.h:27,
from libc/inet/if_index.c:36:
/opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/sysinfo.h:8: error: expected specifier-qualifier-list before '__kernel_long_t'
make[1]: *** [libc/inet/if_index.os] Error 1
make[1]: Leaving directory `/opt/toolchain-build/build/uclibc-0.9.31.1'
The problem is reported at:
https://lkml.org/lkml/2013/5/18/1
The offending kernel commit is:
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=ccdfcc398594
The fix is to patch uclibc 0.9.31 to add the missing kernel data types. The patch
will only be generated for avr32, since uclibc 0.9.31 is not available in Buildroot
for any other architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Cassiano Martin in bug #6692 if host == target the nano
package can pick up the host libmagic and break.
So add a check to see if the file package is enabled and use it,
otherwise just disable libmagic support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches 02-cpp-comments-to-c-comments.patch changes C++-style comments
into C-style comments.
This is unneeded, since gcc accepts C++-style comments in C code anyway.
Ditch that patch, that's one less we have to handle when updating from
upstream.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed by Thomas P. kernel 3.12 oopses when loading/using the
emulated network.
Seems 3.12 broke versatile for qemu like in the past, only in a more
subtle way this time that escaped my automated qemu builds/tests.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offer a little bit more visibility to the companies who sponsored us,
either by sponsoring the developer days, or development
boards. Hopefully this will encourage other companies to do the same :)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow user to supply their own step-hooks by passing a variable
on the make command-line:
make BR2_INSTRUMENTATION_SCRIPTS=/path/to/my/script
This can be useful to run site-specific actions at each step of the
build process, such as logging installed, removed or modified files,
do sanity checks on installed files...
It is possible to call more than one script, by passing a space-separated
lists of scripts to call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This hooks will let us instrument the build process in many ways:
- log current step to see what broke
- time each step to see what is worth optimising
- sanity-check installed files (rpath, overwritten files...)
- call user-provided script
- ...
The steps are coarse-grain, and all have a 'start' and a 'end' hooks.
Here is the list of available steps (8 total):
- extract
- patch
- configure
- build
- install-host
- install-staging
- install-image
- install-target
The download, clean and uninstall steps are not instrumented on purpose.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to some tricky make behavior, the license texts of host packages that
did not provide an explicit HOST_FOO_LICENSE_FILES definition was not saved.
The problem is that it is not straightforward to use a variable
defined/updated inside an evaluated block as input to a foreach statement.
If you try to use $(FOO) then only the original value of FOO is used for
foreach, any update inside the block is ignored. However, if you use
$$(FOO), the entire contents of FOO (typically a list of items) is passed
as one item to foreach, thus causing just one iteration instead of several.
>From Arnout Vandecapelle's explanation:
Any variable referenced with a single $ inside the inner-generic-package
macro is expanded before the resulting contents are eval'ed. Therefore, it
is not possible to refer to variables defined by the inner-generic-package
macro from within a single-$ function call.
To fix the problem, one should defer the evaluation of the entire block
using double dollar signs.
Additionally, a few empty lines have been added to the legal-info-foo block
for clarity.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the generic package handler checks for a directory with patches
before starting apply-patches.sh, this is not the case for gcc: the
script is called, even if there is no directory with patches. This results
into a build failure, as apply-patches exits with error code 1 if the
directory doesn't exist.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of using a (e)glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of building a glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The glibc and eglibc support has been introduced since a little bit of
time now, I believe we can remove the "experimental" statement next to
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu depends on __sync_sub_and_fetch and other atomic primitives that
don't exist in the ARC toolchain yet.
[Peter: adjust beecrypt/php comment dependency, don't mention atomic builtins]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.12 release notes:
* Fix: Remove alternate method to check for VLAN tag offload on Linux
< 2.6.37 (-k/-K options)
* Fix: Hide state of VLAN tag offload and LRO if the kernel is too old
for us to reliably detect them (-k option)
* Feature: Add register dump support for Solarflare SFC9100 family
(-d option)
3.12.1 release notes:
This includes a couple of changes that should have gone into 3.12.
* Fix: Memory corruption when applying external calibration to
SFF-8472 module diagnostics (-m option)
* Feature: Add Intel 82599 and x540 DCB registers to dump
(-d option)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building host-bison needs perl 5.8.7+, as it uses the "-f" option
for site customization scripts. This feature was added in 5.8.7.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I have just released version 3.2.1 of the pciutils. It's purely
a maintenance release with a couple of minor bug fixes and minor
improvements. Thus quoth the changelog:
2013-11-10 Martin Mares <mj@ucw.cz>
* Released as 3.2.1.
* CardBus bridge capabilities are displayed.
* PCIe L1 PM substates are decoded.
* Various bugs were fixed in decoding of PCIe capabilities.
* The sysfs back-end does not spit out unnecessary warnings when
empty slots report only a partial device address. This actually
happens on IBM pSeries.
* Updated pci.ids to the today's snapshot of the database.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option to choose init system was below the one for /dev management.
As Systemd forces the use of udev, it is logical to swap them.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump for a few more options (eg. setting the palette in 4- or 8bpp,
and rendering camera preview with GL).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license of libmodbus is LGPL v2.1 or later and the
licence of programs in tests directory is GPL v3. So
specify only LGPL v2.1.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sections of the hplip-fix-make.patch patch file were removed, because they
no longer appear in the Makefile.am file.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds U-Boot image support for cpio root filesystems. This allows you to
use the bootm command in U-Boot to load the rootfs. It makes it possible to
verify the CRC of the initramfs before booting the kernel.
[Spenser: wrote first version of the patch.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, a symlink was created to the uncompressed filesystem,
which made it a bit useless in case compression was chosen.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes the compression extension available in a variable, so it
can be used by the fs-specific commands. In this patch, it is used
by iso9660. Following patches show more use cases.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will allow us to remove the unused ROOTFS_$(FSTYPE)_POST_GEN_HOOKS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on a suggestion from Peter, this commit factorizes the logic and
regular expressions that are used to find the sysroot and libdir for a
given compiler. It reduces a bit the duplication of code, and
centralizes the most bizarre part of this logic in one place.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a1d94aaa3a ('toolchain-external: add support for musl C
library'), we made the following change to the SYSROOT_DIR mangling
logic:
- SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(32|64)?/(.*/)?libc\.a::'` ; \
+ SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:(usr/)?lib(32|64)?/(.*/)?libc\.a::'` ; \
This was needed to accomodate for musl based toolchains that don't
have libc.a in usr/lib/..., but directory in lib/... Basically, the
change makes the usr/ at the beginning optional.
However, with the very permissive (.*) matching in the middle of the
path, the change above had an unexpected consequence: any path contain
'/lib' would be truncated before this lib. As an example, Peter
reported that his builds, running from /var/lib/buildbot/ were no
longer working because the SYSROOT_DIR was decided to be /var instead
of something like
/var/lib/buildbot/buildroot/output/host/opt/ext-toolchain/arm-linux-gnueabihf/libc/.
So, this commit changes (again!) this regexp by changing (.*) to
([^/]*), the idea being that it will match only *one* path
component. Note that this intermediate (.*) directory was added in
e6e60becb0 ('external-toolchain: add support for Linaro 2012.01') to
accomodate for Linaro toolchains that have a subdirectory in their
sysroot named after the target tuple:
$ ./output/host/opt/ext-toolchain/bin/arm-linux-gnueabihf-gcc -print-file-name=libc.a
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/bin/../arm-linux-gnueabihf/libc/usr/lib/arm-linux-gnueabihf/libc.a
In addition to this, this commit also makes sure that the change
making usr/ optional is properly reported on all the instances of this
regular expression.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'Patching' message in the generic infrastructure prints not only the
package name, but also a reference to the assumed package directory, based
on FOO_DIR_PREFIX/FOO_RAWNAME. This doesn't really add value, as the name
of the package is already apparent from the message and its location should
be obvious. Hence, this patch simply reduces the print to "Patching".
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Variable FOO_DIR_PREFIX is populated from pkgparentdir by the various
package infrastructures. However, if that would be empty (which in fact is
the case for the linux package), FOO_DIR_PREFIX would be set to
'$(TOP_SRCDIR)/package'.
Not only does this make no sense (LINUX_DIR_PREFIX becomes /package/linux,
and for all other packages pkgparentdir is not-empty anyway), but it is also
using a non-existing variable TOP_SRCDIR.
This patch therefore removes the incorrect default.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Split out the information on hooks to a separate section (and source file).
Not only because the hooks are useful for all infrastructures (and thus
don't really fit specifically in the generic infrastructure section), but
also for clarity when the info on hooks will be expanded in later patches.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot has three places where rsync is used:
1. to copy the target skeleton
2. to copy the rootfs overlay(s)
3. to copy overridden package sources
In all of these cases, we want to exclude version control files by default.
Place 1 and 2 used an identical set of explicit --exclude options, while
place 3 used the option --cvs-exclude. This last option, however, not only
excludes version control files, but also binary files (.o, .so) and any file
or directory named 'core' (a problem for the linux kernel that has several
directories with this name). Moreover, the exact list of excluded files when
using --cvs-exclude depends on the version of rsync.
This patch creates one global variable RSYNC_VCS_EXCLUSIONS that can be used
by the various rsync commands. It excludes the version control files of
svn, git, hg, cvs and bzr.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One of the use cases is for the 'local packages' to restore
the SCM info. Some packages use this information to generate
version info during build time. In this case, the local package
can have this hook to restore it by symbolic link for example.
[Thomas: update commit title]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For configurations using a toolchain that is preinstalled on
the host, <pkg>_SITE and <pkg>_SOURCE variables must be kept
empty to avoid downloading any toolchain package.
The actual implementation has been proposed by Thomas Petazzoni.
Signed-off-by: GONZALEZ Laurent <br2@gezedo.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpthread-stubs, libX11, and a few more xorg packages use threads. Since
almost all xorg packages depend on libX11 directory or indirectly, and
since the remaining ones are pretty useless on their own, just require
threads for xorg as a whole.
The thread dependency is kept in libpthread-stubs, because that package
will move out of the x11r7 directory later (pending patch by Spenser
Gilliland), so the dependency on threads will be required then.
Fixes:
http://autobuild.buildroot.org/results/609/6099baac4bb469ae18aab6512233db25183eaabd/
[Arnout: disable all of xorg, correct comment]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling 'tr' without quoting braces, bash can make really weird things
if there are existing 'single-letter-named' directories
eg:
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
aaa
thierry@thierry-desktop:~$ mkdir m
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
AAA
The (quick) analysis is that the callee (tr) argvs then
contain 'm' thus the translation does not work
Using quotes works around it:
thierry@thierry-desktop:~$ echo AAA | tr '[A-Z]' '[a-z]'
aaa
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_UCLIBC_MIPS_ISA hidden Config.in variable defines which uClibc
config option should be enabled for a given MIPS architecture
variant. Therefore, using lower case names doesn't work: they should
be upper case, to match uClibc config option names. This commit makes
sure the mips32, mips32r2 and mips64 builds select the appropriate
uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add libpng libraries to freetype-config and freetype2.pc when they're
needed to avoid build breakage for other packages.
Patch in a different form is already upstream.
Fixing configure & friends is not so good since autoreconf busts things
up because of the odd way things are done (upstream fixed too it seems).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We name all of our boards and defconfig files based on the boards
fullname, not a nickname or a shortname.
'rpi' is short for Raspberry Pi, so name all our Raspberry Pi ressource
with 'raspberrypi' instead of 'rpi'.
This should also help Buildroot-newcomers to recognise Raspberry Pi
related files (defconfig and board doc).
Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: reverse the rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the announcement:
This release fixes a security bug:
* sshd(8): fix a memory corruption problem triggered during rekeying
when an AES-GCM cipher is selected. Full details of the vulnerability
are available at: http://www.openssh.com/txt/gcmrekey.adv
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated on the libqrencode web site, PNG (or SDL) is only
needed for the test and utility programs; the library itself
has no dependencies.
While we are here, remove spaces in the ifeq clause, to match
the examples in the buildroot manual.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 94c72087f3 ("module-init-tools: remove package") removed the
module-init-tools package and therefore added the corresponding config
option in Config.in.legacy. However, the commit forgot to add the
"select BR2_LEGACY" that ensures the build cannot proceed until the
user has acknowledged the change (i.e kmod replacing
module-init-tools).
This commit adds this missing "select BR2_LEGACY".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to uClibc commit f143f920694c, uClibc used to always include the
gnu obstack extension, which is used and required by many tools, such as
binutils.
Because of the change mentioned above, obstack is now optional, and got
disabled per default, so enable it in the uClibc snapshot configuration file.
Signed-off-by: Chris Zankel <chris@zankel.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using kernel headers newer than 3.6.x, uclibc 0.9.31.1 fails to build:
In file included from output/host/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/rtnetlink.h:6,
from libc/inet/netlinkaccess.h:34,
from libc/inet/if_index.c:36:
output/host/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/if_link.h:314: error: expected specifier-qualifier-list before '__be16'
make[1]: *** [libc/inet/if_index.os] Error 1
make[1]: Leaving directory `output/build/uclibc-0.9.31.1'
make: *** [output/build/uclibc-0.9.31.1/.stamp_built] Error 2
This patch adjusts the system type definitions in the netlinkaccess.h
header, updating the types to match those used in uClibc 0.9.33.2.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenPGM builds incorrectly on AVR32 with gcc-4.2.2-avr32-2.1.5.
Since it is presumed to be the only GCC version used by Buildroot
for AVR32, this patch disables openpgm for all cases when AVR32
is selected as the target architecture, including when a toolchain
is downloaded or preinstalled (this is what Buildroot autobuilders
do).
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch reinstates support for uClibc version 0.9.31, which was removed
from Buildroot in commit 8abb5b33c1
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openpgm doesn't build correctly on AVR32 using
gcc-4.2.2-avr32-2.1.5 toolchain: it is configured to call
intrinsic atomic functions not provided by the toolchain,
so they are propagated as unresolved external symbols in the
built openpgm libraries. This breaks programs that try to link
openpgm, because they do not know where to get those either. For
instance, it breaks building zeromq tests when PGM support is
selected.
This commit disables openpgm on AVR32 due to apparent absence of
interest in this package on that architecture and it breaking too
many test builds.
Fixes http://autobuild.buildroot.net/results/5a3261109ea63ba17375003eabd8b5d88757865f/
(at least)
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For out-of-tree builds, this use-case fails to build:
$ make clean all
This is because 'all' is filtered-out in the Makefile wrapper, since
the wrapper itself has a 'all' target.
The 'all' target is just the usual naming for the default target in a
Makefile. In fact, the first target is the default one, so we can name
it whatever we want.
Rename the Makefile wrapper 'all' target to avoid name-clashing.
Fixes#6644.
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: further improvements for readability and
completeness]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'nut' are the Network UPS Tools.
[Note: original patch from Dallas, but completely revamped
by Yann, so nothing remains from the original patch, but two
variable names.]
Signed-off-by: Dallas Clement <dallas.a.clement@gmail.com>
[yann.morin.1998@free.fr: refresh patch, use latest version,
add license, fix commit message, add dependencies, fix
runtime path, fix libs-config, move to 'system utils']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Alexander Lukichev and Thomas Petazzoni on the mailing list,
only one of the two avr32 microarchitectures is relevant for Buildroot:
avr32 Linux implies the avr32b microarchitecure, as used in the ap7000.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* The PID file is not created unless the '-m' option is passed to
start-stop-daemon.
* Remove the mark '-m 0' option as it's not supported by busybox's
syslogd.
* Syslogd and Klogd forks to background by default giving as a result
that the pid stored in the PID file is not correct. Let the
background job be done by 'start-stop-daemon' by passing '-n'
(foreground) to the daemons and '-b' to start-stop-daemon. This
way the pid stored in the PID files is correct.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the list needed to run the Linaro pre-built toolchain
on a 64-bit Ubuntu 13.10 system.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump to allign with the tzdata bump in previous commit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for camera features (exposure, capture loop, shutter speed),
h264 encoding headers, EXIF thumbnails.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also tweak the kernel and buildroot config for basic WiFi support.
And fetch the ASoC patches for builtin audio.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WebKit has some architecture specific support, and therefore is not
necessarily available for all architectures. Make sure the Qt WebKit
option cannot be selected on those architectures that are not
supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable demo mode for netperf to activates a global "-D" <interval> option.
This option will display interim results at least every time interval.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhcpcd fails to build on non-MMU platforms, even with the
--disable-fork option:
bind.o: In function `_daemonise':
bind.c:(.text+0x62): undefined reference to `_fork'
collect2: ld returned 1 exit status
Therefore, we make dhcpcd depend on MMU support, and remove the
non-MMU condition in the .mk file. More recent versions of dhcpcd do
support non-MMU properly, but this commit intends to be only a fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
The libnl configure script has a --{enable,disable}-cli options that
allows to enable or disable the compilation of the libnl tools. Use
this option instead of compiling everything and then removing the
installed programs.
Note that we also get rid of the uninstall command, which is planned
to be globally removed in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
libcap currently has one patch, but it is named using the old naming
strategy, which includes the package version, but not a patch
number. This commit switches this to use the new patch naming
strategy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
According to the documentation, chapter
6.2.8.2 How to add a package from github
"
[...]
FOO_VERSION = tag or full commit ID
FOO_SITE = http://github.com/<user>/<package>/tarball/$(FOO_VERSION)
[...]
- The tarball name generated by github matches the default one from
Buildroot (...),
so it is not necessary to specify it in the +.mk+ file.
"
This commit makes the appropriate changes.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rsync by default compiles statically its own zlib and popt
libraries, it is better to use system wide libraries instead -
both for disk and memory consumption. Change rsync package
accordingly.
Also previously a debug configure option has been lost, as
overwritten by '--with-included-popt' option - fixed.
For example, on ARMv5 rsync binary size is reduced by about 25%.
Signed-off-by: Denis Mingulov <denis@mingulov.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To generate the manual, you need a few tools. If these are not present,
pretty cryptic error messages are given.
This patch adds a simple check for these dependencies, before attempting to
build the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Comment 7e37d235f "zeromq: needs threads" adds BR2_TOOLCHAIN_HAS_THREADS
dependency but forgot to add corresponding comment for cppzmq and czmq. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding support for sysvinit to install reboot, poweroff, and pidof
commands available in /sbin.
Fixes bug #6620
Removed uninstall commands since they aren't used.
There is an error with sysvinit that will prevent the system from booting
if "dshm::sysinit:/bin/mkdir -p /dev/shm" is not present in the inittab.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by "George" in bug #6416, the xenomai-do-not-install-devices
patch is not needed, since Xenomai provides a "install-user" target to
only install the libraries/headers and not the device files. This
patch changes xenomai.mk to use 'install-user' and removes the useless
patch.
Fixes bug #6416.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds missing comments about (e)glibc dependencies and updates the
text of existing comments.
Additionally, it splits dependency expressions for the touched packages from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ncurses not necessary when building host-util-linux, so passing
--without-ncurses avoids from misdetecting an installed host ncurses
on the build machine.
[Thomas: improve commit message]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures one can be running a 64-bit kernel with a 32-bit
userland. Such is the case for sparc64 (unsupported) for example and
mips64 with n32 ABI.
Some tools that interface directly with the kernel need to be built
specially for this, so introduce this symbol to tweak their build in
one central kludge to be future-proof.
Example: bug #6602.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Samuel Martin noticed, libthread_db is not only needed when
cross-gdb+gdbserver is used, but also when the native gdb is used on
the target. As a consequence, this patch modifies the glibc package
and the external toolchain logic to ensure that libthread_db is copied
to the target either when the native gdb or gdbserver is enabled, by
relying on the BR2_PACKAGE_GDB option, which is enabled when native
gdb and/or gdbserver are enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Ripard reported that the Linaro toolchains were not visible
when selecting a Cortex-A, but forgetting to set the EABI to
EABIhf. While this is expected, Buildroot should normally should a
comment in this case. However, the comment is only visible when the
selected ARM architecture is not ARMv7 *and* the EABI is not
EABIhf. Instead, make the comment visible when either the selected
architecture is not ARMv7 *or* when the selected EABI is not EABIhf.
While we're at it, reword the comment text so that it actually fits
within the limits of the menuconfig screen.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
In 11ec38b695 ("toolchain-external: fix Linaro ARM toolchain
support"), we fixed the support for Linaro EABIhf toolchains by adding
a /lib/arm-linux-gnueabihf -> /lib symbolic link. This is needed
because the dynamic loader looks for libraries in
/lib/arm-linux-gnueabihf rather than the usual /lib, but Buildroot
installs all libraries in /lib.
However, we forgot that the dynamic loader also loads libraries from
/usr/lib/arm-linux-gnueabihf rather than /usr/lib, so this patch fixes
that by adding the necessary symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
With commit b58bf60b51 the libgen.h
include was removed from confdata.c, but it is needed for the dirname
function declaration.
Fixes the following compile warning:
./confdata.c: In function ‘conf_split_config’:
./confdata.c:849:6: warning: assignment makes pointer from integer
without a cast
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously, an external-toolchain on a mipsel/mips64el target
didn't select the appriopriate endianness but
it asked the user to set the correct CFLAGS on his/her own.
We fix this by appending "-EL" to the toolchain wrapper options
if the user has selected a mipsel/mips64el target.
[Thomas: remove unneeded test on BR2_ENDIAN, since mipsel and mips64el
are always little-endian, and add the corresponding big endian case.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set --with-arch instead of --with-tune for MIPS so that the
generated code will be optimal for the given MIPS ISA.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because of the new fl_open_uri() function since the fltk bump using
fork().
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They can fail on some odd toolchain configurations because of
buildsystem shortcomings and aren't expected to be used in normal
scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Current version of config.guess may fail to detect host libc version,
which results in problems with configure when building gcc. Current patches
are removed. Patch to add support for ps2 is removed as it was discussed on
buildroot mailing list that it is no longer needed.
[Arnout: drop the 'improve uClibc' patch, update commit message, update to
more recent version, update README.]
Signed-off-by: Jouko Nikula <jouko.nikula@espotel.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
trace-cmd use python-config to find out which headers
and libraries should be used to link against the Python libraries.
By default, python-config returns paths that are inappropriate for
cross-compilation.
This patch replaces python-config with pkg-config as a workaround.
Add PYTHON_VERS to build trace-cmd with python2 or python3
Fixes:
http://autobuild.buildroot.net/results/980/980875810528ac1dee34b8c268d9b3c40b2e35ec/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
opkg has released a new version v0.2.0. The opkg community is also on
the way to switching completely from subversion to git.
The current git repository is placed on Bitbucket and will probably move
once again if there will be find a new home for the project.
https://bitbucket.org/opkg/opkg
The new version 0.2.0 is almost a bugfixing release with a lot of small
changes.
This patch is adding the license info too.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
jq is like sed for JSON data - you can use it to slice and filter
and map and transform structured data with the same ease that sed,
awk, grep and friends let you play with text.
[Peter: fix license, add flex/bison deps, force c99]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch mostly fix the casing on different entries titles.
It also changes the name of "Misc devices firmwares" to a simpler
"Firmware".
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch moves :
"Filesystem and flash utilities" menu
"X applications" category
"JSON/XML" menu
so they are in alphabetical order with the rest of the file.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kobs-ng failed to build with 2.6.36, because enum tested with #ifndef
mtd.c: In function 'mtd_open':
mtd.c:696:42: error: 'MTD_FILE_MODE_NORMAL' undeclared (first use in this
function)
mtd.c:696:42: note: each undeclared identifier is reported only once for each
function it appears in
mtd.c: In function 'mtd_set_ecc_mode':
mtd.c:896:43: error: 'MTD_FILE_MODE_NORMAL' undeclared (first use in this
function)
mtd.c:914:43: error: 'MTD_FILE_MODE_RAW' undeclared (first use in this
function)
Do kernel version test before enum redefines.
Signed-off-by: Sergey Alyoshin <alyoshin.s@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply a patch from upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BerkeleyDB has changed its license since version 6. New license (AGPL) may
be incompatible with some packages. So we prefer to stick to version 5
This reverts commit 4c478de2e7.
[Peter: adjust comment as suggested by Yann]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
usage:
# set cache limit size
make CCACHE_OPTIONS="--max-size=5G" ccache-options
# zero statistics counters
make CCACHE_OPTIONS="--zero-stats" ccache-options
[Peter: drop the redundant ifeq]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For the target, add --with/out to configure options as needed.
For the host, disable everything.
This was triggered by a failing build of the host package because it tried to
link the shared library with libbz.a, which isn't compiled with -fPIC.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the configuration options for custom repository locations and
versions are very similar between the linux and uboot packages, there are
some minor differences. This patch lines up both packages.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Config.in(.host) files have constructs like:
config FOO_VERSION
string
default "1.0" if FOO_1_0
default "2.0" if FOO_2_0
default $FOO_CUSTOM_VERSION if FOO_CUSTOM
The dollar sign here is not needed and confusing, so can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When legacy symbols are selected, the menuconfig shows the explanation for
users, immediately followed by the line "Legacy options removed in 2013.08".
In order to visually keep these apart, we introduce a separator.
Note that a line with all spaces is not correctly shown by menuconfig (the
width will not be kept at 80 characters, so the output is '*** ***').
A dashed line seemed a logical alternative, and with another dashed line on
top, the description becomes a block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch clarifies the message shown to users in the legacy menu.
It explicitly mentions the need to save the configuration before disabling the
legacy options.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The existing comments in Config.in.legacy are not entirely in-line with
current practice. The comments implies that BR2_LEGACY should not be set when
the conversion from old-to-new symbol can be done automatically using the
appropriate 'select' statements. However, none of the existing legacy options
does it this way. Moreover, I think it's intentional that the user is notified
of the change, so that the removal of the legacy options in later buildroot
versions no longer poses a problem.
Additionally, the comments now describe how to handle string options.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following patches are removed since they are upstreamed:
- qt5base/qt5base-0001-eglconvenience-add-egl-to-CONFIG-to-get-correct-incl.patch
- qt5jsbackend/qt5jsbackend-0002-fix-uclibc.patch
Remove "-nomake demos" from configure options since "demos" directory is
merged into examples.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
docker is using autotools-package while it is in fact just a plain make
package.
Remove docker-1.5-skip-configure.patch which was just a hack to avoid
calling the non-existent configure script.
Remove docker-1.5-pkgconfig.patch which is not needed when PATH is set
appropriately.
Add a XLIBPATH option to the command line to avoid linking with
/usr/X11R6/lib.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package builds with -m32. In buildroot, we don't have multilib
support so only the 64-bit libraries are available, which can't be
linked against these 32-bit object files.
I've tested this with the Sourcery and buildroot toolchains - neither
works.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(BUILD_DIR) is a nice place to put files generated during the build.
With the advent of user-supplied step-hooks, they may want to store
some information on the build.
Export BUILD_DIR to that effect; update manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the -D to install commands to ensure that all the necessary
installation directories exist.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It fails to build with my makeinfo version. Note that the autobuilders don't
see this, probably because they don't have makeinfo installed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perf uses asciidoc to generate documentation, but /usr/bin/asciidoc will
try to use buildroot's host-python which doesn't have the required
unicodedata. Recent kernels always try to build the man pages when
installing. To avoid that, define ASCIIDOC as an empty string so the
Makefile can't find the executable and skips the documentation
generation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 33a9d34ff3 fixed the staging
install for webkit, which was hanging due to deadlock during parallel
make install.
This problem also afflicts the target install, which is fixed by this patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This gets around the following build errors that occurs on a system with
perl 5.18:
[...]
wget.pod around line 2151: Expected text after =item, not a number
wget.pod around line 2156: Expected text after =item, not a number
wget.pod around line 2162: Expected text after =item, not a number
[...]
This is already committed upstream and this patch will be unnecessary in
wget 1.15 when it is released:
commit 7f43748544f26008d0dd337704f02a6ed3200aaf
Author: Dave Reisner <dreisner@archlinux.org>
Date: Mon Jun 17 23:31:46 2013 +0530
Fix error in texi2pod intriduced with Perl 5.18
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-Werror shouldn't be used in released code since it can
cause random build failures on moderate warnings. It also
depends on the used toolchain since different toolchains may
or may not print the same warnings.
Fixes the following build problem on MIPS64/n64:
main.c: In function handle_dm_alert_msg:
main.c:336:5: error: format %llx expects argument of
type long long unsigned int, but argument 4 has
type __u64 [-Werror=format=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needs three patches from upstream, plus a custom patch to disable tests.
Drop old patches, all applied upstream or no longer needed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the comments in Config.in files when depending on toolchain
options are not at all lined up. This patch adds a section to the
documentation that explains which format is to be used.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: fix missing double-quote at end of comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The way the compositor was selected in Config.in was counter-intuitive,
because the fbdev backend is selected by default even if a different one
is available.
Instead, select the fbdev backend only if no other one was selected by
the user.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: don't reorder entries, keep alphabetical sort]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes below build error when executing
"make tcl-dirclean; make tcl-rebuild".
ln -s tclsh8.4 /opt/test/br-x86/buildroot/output/target/usr/bin/tclsh
ln: failed to create symbolic link '/opt/test/br-x86/buildroot/output/target/usr/bin/tclsh': File exists
make: *** [/opt/test/br-x86/buildroot/output/build/tcl-8.4.19/.stamp_target_installed] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes below build error when executing
"make host-sam-ba-dirclean; make host-sam-ba-rebuild".
ln -s ../../opt/sam-ba/sam-ba /opt/test/br-x86/buildroot/output/host/usr/bin/sam-ba
ln: failed to create symbolic link '/opt/test/br-x86/buildroot/output/host/usr/bin/sam-ba': File exists
make: *** [/opt/test/br-x86/buildroot/output/build/host-sam-ba-2.12/.stamp_host_installed] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using the 'local' site method works just fine for target
packages. However, for host packages, when HOST_<pkg>_SITE is
automatically defined by the package infrastructure to be equal to
<pkg>_SITE, when defining the <pkg>_OVERRIDE_SRCDIR, the $($(2)_SITE)
is empty, due to a missing additional dollar sign.
This patch ensures that the <pkg>_OVERRIDE_SRCDIR gets the correct
value, regardless of whether the HOST_<pkg>_SITE variable has been
defined by the package itself, or inferred by the package
infrastructure using the <pkg>_SITE value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: http://stackoverflow.com/questions/19311747/buildroot-cant-use-local-site-method-for-custom-host-packages
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Angstrom toolchains available at
http://www.angstrom-distribution.org/toolchains/ are not usable as
external toolchains in Buildroot, because they are not pure toolchains
with just the C library, but instead complete SDKs with many
cross-compiled libraries (Gtk, Qt, glib, neon, sqlite, X.org, and many
more, approximately 200 MB of libraries).
Buildroot cannot use such toolchains, and while this is documented in
our manual, some users still try to do this. Today, one such user came
on the IRC channel, reporting a build problem, which we started
investigating, only to realize after a long time that he was using an
Angstrom toolchain.
To avoid this problem in the future, we explicitly check if the
toolchain is from Angstrom by looking at the vendor part of the tuple
exposed by the toolchain: as soon as it is
<something>-angstrom-<something-else>, we reject the toolchain with an
explanation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch:
- fbgrab-proper-Makefile-for-cross-compiling.patch
has been integrated in the new upstream version.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The egl.pc file installed exposes version 1.0, while it really is a
much higher version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original titles did no longer correspond with the actual menu names.
Additionally, choose a name that better reflects the fact that this is a
list.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Procedure highly inspired by:
http://wayland.freedesktop.org/raspberrypi.html
The resulting weston works almost flawlessly, but requires a bit
of love:
- /boot/config.txt must include this line: dispmanx_offline=1
- at least 128MiB of RAM must be allocated to the GPU
- after 24-or-so terminal-clients are connected, the screen
turns black. Exiting a client restores the screen
It seems increasing/decreasing the amount of memory allocated to
the GPU makes the clients limit to wobble above/below 24 clients
at a time. YMMV, as they say...
Without dispmanx_offline=1, the limit is much below 24, at around 13.
But changing the amount of memory allocated to the GPU does not change
this limit in this case. YMMV, again.
Anyway, there are not many different clients available, besides the
terminal client, since all other clients are EGL-based, and there
is (yet) no EGL support (for weston!) on the RPi. So the tests were
made only with the terminal client.
The system is rather smooth, but spwaning too many clients in a
rapid-fire is sure to exhibit some lag. Resizing windows is a bit
jerky, but moving them along is fine.
Note: the config option has a depends on THREADS due to rpi-userland,
even though weston itself already inherits the same dependency from
wayland. But better be clean and safe.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While porting wayland/weston to run on the RPi, I always tripped on
this assert.
Thinking there was an issue with weston, I poked the weston guys on
IRC about the issue. 'daniels' on irc.freenode.net/#wayland suggested
removing the assert altogether, as that's what they had pushed
upstream in their wayland pull-request:
https://github.com/raspberrypi/userland/pull/92
Turns out they forgot to include this in their pull-request, but that
they were using a patched rpi-userland without that assert.
And indeed, without that assert, weston runs on the RPi. :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
configure whines while checking for wayland-scanner.
wayland-scanner is used to generate the protocol parser C files from
the protocol definition XML files.
weston has a hard-dependency on wayland-scanner, so it can regenerate
its shell/mouse/keyboard/... "handlers".
Since we're using a tarball, those protocol files are already generated
and up-to-date, but the check is hard-coded and unconditional. If
wayland-scanner is missing, configure fails.
We could well patch away this check, but we'd have to carry and maintain
it probably for ever.
Better to fix it: add a patch from upstream weston to fix configure
whining.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even with EGL disabled, weston-1.2.2 still tries to build the
simple EGL clients, so they need to be explicitly disabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for de-interlacing of /unusual/ MPEG streams.
Yes, some people seem to enjoy generating MPEG streams in
which interlacing is not constant. That's apparently 100%
valid, but yet very unusual, and at the very least, weird.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The weston package uses the $(WAYLAND_VERSION) variable instead of
$(WESTON_VERSION).
This went unnoticed for now, as we were using the same version for
wayland and weston. But that's not always the case, since we have,
for example: wayland-1.2.1 and weston-1.2.2, and no wayland-1.2.2.
Fix this by using the correct variable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also opkg needs mmu even without gpg verification so mark as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Redis project home page moved to redis.io, thus also update the download
url accordingly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The main file of this package is src/libnetfilter_cthelper.c, which states
GPLv2+.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #6452 (eglibc from Linaro 2013.07 not copied to
target correctly) by:
* Copying only the relevant library loader to the target on ARMhf
(i.e ld-linux-armhf.so and not ld.so*). This is needed since Linaro
toolchains provide two library loaders, one ARMv7 hf, and one ARMv4
soft-float.
* Making sure a $(TARGET_DIR)/lib/arm-linux-gnueabihf/ symbolic link
to $(TARGET_DIR)/lib/ exists, since the dynamic loader of Linaro
toolchains expects libraries to be found in
$(TARGET_DIR)/lib/arm-linux-gnueabihf/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The copy_toolchain_lib_root function is responsible for copying a
given library (and its symbolic link) to the target filesystem. To do
so, it looks for the library in various locations, and then iterates
over the symbolic link all the way to the library, copying them as
needed to the target filesystem.
However, the latest Linaro toolchains bring an interesting use case:
the lib/ directory in the toolchain is organized as follows:
- ld-linux.so.3 -> arm-linux-gnueabi/ld-2.17...so
- ld-linux-armhf.so.3 -> arm-linux-gnueabihf/ld-2.17...so
- arm-linux-gnueabi/
- all ARMv4T soft float libraries
- arm-linux-gnueabihf/
- all ARMv7 hard float libraries
In order to match what we do with all other toolchains, we want all
those libraries and symbolic links to be copied directly under
$(TARGET_DIR)/lib. This commit does that by adjusting the copy logic.
This is part of the fix for bug #6452 (eglibc from Linaro 2013.07 not
copied to target correctly).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for external toolchains based on the musl C
library, as available from http://www.musl-libc.org.
Note that the pre-built musl toolchains available from
http://musl.codu.org/ are not working for the moment, since they lack
sysroot support. However, this problem has been reported to the
maintainer, who has already added sysroot support in his scripts at
https://bitbucket.org/GregorR/musl-cross, and therefore the next
version of the pre-built toolchains should work with Buildroot
out-of-the-box. In the mean time, the musl-cross script must be used
to build the toolchain.
[Peter: reword comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check_glibc function contained checks to verify that the user had
properly enabled the largefile, IPv6, locale and wchar options, to
match how glibc is configured. This was useful when the support for
glibc external toolchains was introduced, but since then, we added the
BR2_TOOLCHAIN_USES_GLIBC symbol that automatically enables largefile,
IPv6, locale and wchar support when a glibc or eglibc external
toolchain is used. Therefore, many of the check_glibc checks are
useless now, so we can remove these.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes various typos and mistakes in the comment at the top
of the helpers.mk file:
* usefull -> useful
* The optional stripping of libraries no longer exists, so there's no
reason to mention it.
* Indicate that the copy_toolchain_lib_root function is also used by
the glibc package, not only by the external toolchain logic.
* Separate more clearly the top comment introducing the entire file,
from the comment introducing the first function.
[Peter: reword top comment, add missing 'by']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, the copy_toolchain_lib_root function took as argument the
base name of a library (e.g: libm.so), and was assuming that the usual
scheme libm.so.<x> being a symbolic link to the real library was used.
However, with musl based toolchains, the C library is named libc.so
directly, with no symbolic link at all. Therefore, this commit changes
the copy_toolchain_lib_root to move the responsibility of using a
wildcard or not after the library name the caller's responsibility.
So, all the existing LIB_EXTERNAL_LIBS values are modified to have a
.* at the end, so that the behavior is effectively unchanged.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The external toolchain code makes the assumption that all C libraries
have a ld*.so, libc.so, libcrypt.so, libdl.so, libgcc_s.so, libm.so,
libnsl.so, libresolv.so, libutil.so, and when thread support is
enabled, libpthread.so, etc.
However, this is not the case with the musl C library, which
integrates all the functionalities in a single libc.so file. In
preparation of the support of the musl library, we make the current
value of LIB_EXTERNAL_LIBS conditional to glibc or uClibc.
The addition of additional libraries through
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS is kept outside the condition, at
the end.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependencies-source, dependencies-clean and dependencies-dirclean
targets are not needed, as long as 'dependencies' is not used in the
<pkg>_DEPENDENCIES of a package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit converts the 'toolchain-external' logic to the package
infrastructure.
The TOOLCHAIN_EXTERNAL_DIR variable (which points to where the
toolchain is located) is renamed to TOOLCHAIN_EXTERNAL_INSTALL_DIR,
because the former conflicts with the package infrastructure (which
defines the <pkg>_DIR variable for each package as pointing to its
build directory).
The new _EXTRA_DOWNLOADS mechanism is used for Blackfin toolchains.
The extract, configuration and installation steps are converted inside
the <pkg>_EXTRACT_CMDS, <pkg>_CONFIGURE_CMDS and
<pkg>_INSTALL_STAGING_CMDS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit converts the toolchain-buildroot logic to the package
infrastructure. The package is fairly simple as it only defines
BUILDROOT_LIBC, and depends on host-gcc-final to get the overall
internal toolchain build logic started.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces a virtual package called 'toolchain', located
in 'toolchain/toolchain', which simply depends on
'toolchain-buildroot' or 'toolchain-external' depending on the
selected toolchain backend.
For now, toolchain-buildroot and toolchain-external are still manual
make targets, but the following patches convert those backends to use
the package infrastructure as well.
In addition to this:
* The main Makefile is modified to always make BASE_TARGETS point to
this new toolchain virtual package.
* The main Makefile is changed to include all the toolchain/*/*.mk
files: the toolchain virtual package, and the toolchain-buildroot
and toolchain-external directories.
* The dependency of the toolchain on prepare dirs and dependencies is
moved to the toolchain virtual package. It is moved as a
prerequisite of the "toolchain-source" rule to ensure that all
directories are prepared before we even start extracting the
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Converting the external toolchain logic into a package raises a very
special use case that wasn't handled by the package infrastructure:
the Blackfin toolchain is delivered as two tarballs instead of
one. Unfortunately <pkg>_SOURCE only allows to pass one tarball name.
However, we really want both tarballs to be known by the package
infrastructure, so that the normal 'source' and 'external-deps'
mechanism work fine.
In order to achieve this, we add a <pkg>_EXTRA_DOWNLOADS variable,
which allows a package to list other stuff it would like to see
downloaded, but that are otherwise not used by the package
infrastructure itself: it is up to the package to do it by itself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, only the eglibc build was pulling host-gawk as a
dependency, but after more testing, it turns out that the glibc build
also requires host-gawk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on the contents of LEGAL, without checking the code.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the README, perl can be used either under
Artistic or under GPLv1+ license, so include both.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because of the previous mediastreamer bump (because of the untested ortp
bump) we need to bump linphone as well to avoid build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes several vulnerabilities.
TODO: update to a more modern branch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.21.1 is getting quite old, the linker issues with 2.22 seems to be
(mostly?) sorted out by now and armhf needs 2.22+, so let's bump the
default version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though new packages are normally added in the right alphabetical order,
there still remain quite a number of incorrect orderings in package/Config.in.
In this patch, alphabetical order is created in each menu.
Note that this sometimes mean that packages that logically belong together, like
cups, gutenprint, hplip, are now split apart.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ext-tool.mk logic uses the TOOLCHAIN_EXTERNAL_PREFIX variable
unconditionally, even if the external toolchain is not used. Until now
this wasn't a problem since ext-tool.mk was only included when the
external toolchain backend was selected, but the next patches are
going to include this file unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to avoid the work of converting the toolchain-crosstool-ng
logic to the package infrastructure, we remove it from Buildroot,
since it has been deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a 'Known issues' chapter, which lists the exceptions I have
currently in the autobuilder scripts to avoid known problems from
occuring. I believe it is more useful to document them rather than
keeping them hidden in my autobuilder script.
[Peter: s/either/either use/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ltp-testsuite to the latest version available. In
addition to that, it also:
* Removes the ltp-testsuite-disable-controllers.patch file, which
becomes useless thanks to the workaround that consists in removing
-D_FILE_OFFSET_BITS=64 from the CFLAGS. This is necessary because
ltp-testsuite uses the non-largefile compatible <fts.h> interface.
* Marks the package as not-available on AArch64, since it doesn't
build properly. A bug has been submitted upstream to the Linaro
people doing the AArch64 support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.0.0-b6 fix a security issue:
Under certain circumstances an FD leak occurs and may be misused for denial of
service attacks against socat running in server mode.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
tcpspray.o: In function `tcpspray':
tcpspray.c:(.text+0x4a8): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [tcpspray] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if BR2_PREFER_STATIC_LIB is set:
src/libproxychains.c:34:19: fatal error: dlfcn.h: No such file or directory
compilation terminated.
make[1]: *** [src/libproxychains.o] Error 1
In additional, the README file also mentions that this program works only on
dynamically linked programs.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Misc enhancements and fixes for USB, camera, audio, codecs, dispman,
and openMAX.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2c859079cd (configs/qemu: bump relevant config version) renamed
a number of linux configuration files, but forgot to update the defconfigs.
Tests shows that atleast arm versatile doesn't boot with 3.11, so rename
the linux configuration files back rather than adjusting the defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but the HEADERS_3_9 option will go away by the
time 3.9 is no longer supported, possibly leading to breakage.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes two security issues:
- The Dropbear server could be made to consume large amounts
of memory because decompressed packet sizes weren't checked.
Depending on the OS and hardware this might be a denial of
service.
- Valid users could be identified due to timing variations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the "BR2_JLEVEL" variable is empty use "make" without
the "-j" option, because to be able to use top-level parallel
make we must not force the number of jobs in sub-make.
Example:
make BR2_JLEVEL= -j8
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
arm_nuri needs some DT fixups to switch to the 3.11.x series since it's
now default for that kernel defconfig.
[Peter: adjust comment in sparc defconfig to match]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
accurip, audiofxbad, ivtc, midi and yadif are new dependency less plugins,
dtmf, rtpmux/rtpvp8 and scaletempo got moved to -good, hls needs gnutls,
celt is gone and dash + webp are new.
At the same time fix the libmms comment dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DTMF plugin moved from bad, udp plugin no longer needs IPv6 and taglib
support was missing.
Patch needed for O_CLOEXEC on uClibc / older Glibc versions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 0be0899bfd (mpc: bump to version 1.0.1 and license change), we
no longer patch configure.ac, so we can skip the autoreconf step.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the idea of skipping the intermediate gcc step seems to work
fine in most situations, it causes problems with the SSP
support. Until we can figure out a proper solution for this problem,
we need to revert back to the previous solution of a three stages
build.
This reverts commit 2babed4a50.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also drop sqlite-dont-force-posix-fallocate.patch because it is fixed upstream.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
text.o: In function `execute_command':
text.c:(.text+0x7f8): undefined reference to `fork'
text.o: In function `do_int_speller':
text.c:(.text+0x3480): undefined reference to `fork'
text.c:(.text+0x34f4): undefined reference to `fork'
text.c:(.text+0x3568): undefined reference to `fork'
text.o: In function `do_alt_speller':
text.c:(.text+0x3914): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [nano] Error 1
[Peter: fork() only in full version, so force tiny for !mmu]
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
exec.o: In function `zfork':
exec.c:(.text+0x150c): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [zsh] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we have patches touching configure.ac and hence need to set
<pkg>_AUTORECONF = YES we also have to remember to set
HOST_<pkg>_AUTORECONF = YES if we build both host and target versions,
which is often forgotten (latest case was bison).
Fix it by making the host versions of _AUTORECONF and _AUTORECONF_OPT
default to whatever the target versions are set to, similar to how we
handle a number of the other variables.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build with gpu-viv-bin-mx6q libraries was broken since it wasn't
using "-DEGL_API_FB=1" flag which is found in egl.pc.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'make clean' recipe is using variables that are not defined without
.config file, causing only a partial cleanup when the .config file is
accidentally deleted.
This patch moves those variables that do not depend on values from .config
outside the BR2_HAVE_DOT_CONFIG check, so that 'make clean' is much more
similar with and without .config.
Since HOST_DIR is determined from BR2_HOST_DIR in .config, the host
directory cannot be cleaned correctly without making assumptions, if no
.config is present. However, to cover most people's use cases, we assume
the default value of $(BASE_DIR)/host in this specific case.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove MB_CUR_MAX patch since it's unnecessary/insufficent for non-wchar
compilation since c29e01e61e
no-gets patch unnecessary also since it's been fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
/opt/test/buildroot/buildroot/output/host/usr/bin/arm-buildroot-uclinux-uclibcgnueabi-gcc inetd.o servtab.o builtins.o sig.o daemon.o setproctitle.o mysleep.o -o inetd
servtab.o: In function `loadconfigfile.clone.0':
servtab.c:(.text+0x98c): warning: gethostbyname is obsolescent, use getnameinfo() instead.
inetd.o: In function `main':
inetd.c:(.text+0x8a4): undefined reference to `fork'
inetd.c:(.text+0x974): undefined reference to `fork'
daemon.o: In function `daemon':
daemon.c:(.text+0xc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [inetd] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
./tmp./bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status.
./bin/arm/lmbench.a(lib_tcp.o): In function `tcp_connect/'cc8Ta2C2.o: Inmake[2]: function `*** [../bin/arm/bw_file_rd] Error 1
initialize':
lib_tcp.c:make[2]: (.text+0x208): warning: gethostbyname*** Waiting for unfinished jobs....
is obsolescent, use: getnameinfo
bw_pipe.c(): (instead..text
/+tmp0x134/)cc5yg1Q2.o: :undefined In referencefunction to`server_main `'fork:
'bw_tcp.c
.:.(./textbin+/0x298arm)/:lmbench.a (undefinedlib_timing.o )reference: Into function`fork '`
benchmp/'tmp:/
cc5yg1Q2.olib_timing.c:: (In.text function+0x34fc `)main: 'undefined:
bw_tcp.creference: (to. text`fork+0x370'
)collect2: : undefined reference to `fork'
../bin/armld returned 1 exit status/lmbench.a(lib_timing.o): In function
`benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_pipe] Error 1
make[2]: *** [../bin/arm/bw_tcp] Error 1
../bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_mmap_rd] Error 1
../bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_mem] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
mountd-mountd.o: In function `main':
mountd.c:(.text+0x1264): undefined reference to `fork'
mountd.c:(.text+0x1320): undefined reference to `fork'
mountd-rmtab.o: In function `ha_callout':
rmtab.c:(.text+0xa8): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [mountd] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to glibc-2.18/ports/sysdeps/mips/preconfigure,
if no -mabi was passed to CFLAGS, then it defaults to -mabi=n32.
This breaks o32 and n64 builds for MIPS64. Therefore, it is
necessary to append -mabi to CFLAGS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a quite old thing, latest version is from 2009
but it is useful to applications based on xmotif.
It has been tested with buildroot on ARM/iMX6.
[Peter: pass --no-recursion to not error out in test/configure]
Signed-off-by Thierry Bultel <thierry.bultel@wanadoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnupg is compiled with --enable-minimal flag. This produces a binary that only
supports ElGamal and DSA public key algorithms.
RSA has been the default for `gpg --gen-key` since 2009, so it makes sense to
be able to build a gnupg binary that supports it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since STAGING_DIR is defined as (package/Makefile.in):
STAGING_SUBDIR = usr/$(GNU_TARGET_NAME)/sysroot
STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR)
removing HOST_DIR will automatically remove STAGING_DIR. This patch updates
'make clean' based on this knowledge.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin infrastructure is based on shared objects so it won't build
for static-only scenarios.
And the daemon uses fork() so MMU is required.
[Peter: move below suboptions]
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
./libfindtools.a(pred.o): In function `launch':
pred.c:(.text+0x240c): undefined reference to `fork'
collect2: .ld returned 1 exit status/libfindtools.a
(pred.o): In function `launch':
pred.c:(.text+0x240c): undefined reference to `fork'
collect2: ld returned 1 exit status
make[4]: *** [oldfind] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: *** [find] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
logrotate.o: In function `switch_user_permanently':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:129: undefined reference to `fork'
logrotate.o: In function `removeLogFile':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:431: undefined reference to `fork'
logrotate.o: In function `mailLog':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:597: undefined reference to `fork'
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:615: undefined reference to `fork'
logrotate.o: In function `compressLogFile':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:533: undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [logrotate] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also drop diffutils-gets-no-longer-exists-in-eglibc-2.16.patch because
gets is unconditionally undefined now so we don't need the patch.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SABRE Board for Smart Devices (SABRE-SD) is Freescale's evaluation board
based on the i.MX 6Quad ARM Cortex-A9 applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com
and SW release 3.0.35_4.1.0.
[Peter: add comments to defconfig]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
i.MX6 SoloLite EVK is Freescale's evaluation board based on
the i.MX6 SoloLite applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com
and SW release 3.0.35_4.1.0.
[Peter: comment defconfig]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It was missing the dependency on the toolchain features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the build on ARC as well, as 2.0.17+ includes a fix
that checks for existence of 'sysctl'.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We should use our LDFLAGS when building as well. At the same time, drop the
unused CIVETWEB_LDFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case there are many arguments passed to the tools, the command line
can get very long, and difficult to parse visually.
For example, the Linux kernel passes a lot of arguments to gcc (at least
45, which gives 53 with our hard-coded args). Looking at such a command
line is daunting.
So, add the possibility to print each argument on its own line.
Also, enclose all args between single quotes, so the command line
can be safely copy-pasted without special chars (spaces, $) being
inrerpreted by the shell.
Add blurb about toolchain-wrapper to documentation at the same
time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to the latest cset in master for a bunch of fixes
for transconding, muxer and html5 video.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is required for building the 'crypto', 'odbc', 'ssh'
and 'ssl' Erlang applications. These apps are skipped
regardless of whether they're enabled and their dependencies
can be met if this environment variable isn't set.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 'make help' lines for generating the manual did not consider ePub
correctly. Instead of providing a limitative list for 'make manual', the
text is changed into 'all formats'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When generating the manual, you see following messages:
>>> Generating HTML manual...
>>> Generating Split HTML manual...
>>> Generating PDF manual...
>>> Generating Text manual...
>>> Generating EPUB manual...
and with this patch the capitalization is changed so that it becomes:
>>> Generating HTML manual...
>>> Generating split HTML manual...
>>> Generating PDF manual...
>>> Generating text manual...
>>> Generating ePUB manual...
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The -s option is only mandatory for the charmap,
else the filename is always empty and nothing
is generated.
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list. They have been broken for a long time, and are
not commonly used in embedded systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt translation files are currently created and moved under
$(STAGING_DIR)/usr/translations but not installed on the target.
This patch defines the translations directory to
/usr/share/qt/translations and defines a QT_INSTALL_TARGET_TRANSLATIONS
macro to deploy them from the staging directory to the target directory.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
luaposix includes a curses binding which is optional and auto-detected by autotools.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Releases are no longer named 5.1.X, just the X portion remains now.
Fixes autoreconf issues with the automake bump, however since the patch
is no longer required that's not an issue now.
[Peter: now needs IPv6]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There's no stated purpose and it breaks with automake 1.12+
If it breaks in some scenario ping me, i've got a patch to fix the
autoreconf issue and re-enable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A python library that calculates CRC checksums of the CCITT/XModem
variant.
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpci.so* is installed without +x permissions thus preventing
stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libiconv.so* and libcharset.so* are installed without +x permissions
thus preventing stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libintl.so* is installed without +x permissions thus preventing
stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The python language bindings for ZeroMQ.
[Peter: moved version note to .mk, single toolchain deps line]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
some CMake stuff comes from LuaDist, but CMake is not the primary build infrastructure of LuaCrypto.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Disable reversed/already applied patches fallout from commit
5871b79199
Reverse patches are bad, they may unfix things with version bumps and
just sneak under the radar with pure batch mode.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/868/8687be8ec029486d9c5e2224cde542134f72884b/
The recent (d245fbb41d: apply-patches.sh: detect missing patches)
change to apply-patches.sh causes a number of regressions with packages
using downloadable tarballs of patches (typically from Debian), as
those contain additional files besides just the patches (ChangeLog's,
debian/rules, ..).
This use case is arguably abusing the _PATCH handling, but it used to
work so people might rely on it so go back to only warn about this
instead of erroring out.
At the same time reword the warning message.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make consistent the capitalization and punctuation of Signed-of-by examples.
Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mudflap library is only useful if one uses the -fmudflap gcc
option to do more checks on pointers/arrays. This commit adds an
option to enable/disable mudflap support at the gcc level. By default,
it is disabled, which saves a little bit of build time compared to the
default of gcc which consists in enabling mudflap support.
Since mudflap is now disabled by default, and ensured to never be enabled
on platforms where it is not available, some gcc.mk code that was used to
disable mudflap in problematic configurations can be removed.
Whether -fmudflap is used when building is left to the user.
[Peter: tweak commit text, fix white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The only remaining thing in toolchain-buildroot/Config.in.2 is the
inclusion of the elf2flt option. It doesn't really make sense to have
a separate Config.in file for that, so let's move this to
toolchain-buildroot/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit refactors how Stack Smashing Protection support is handled
in Buildroot:
*) It turns the BR2_TOOLCHAIN_BUILDROOT_USE_SSP option into an option
that only enables the SSP support in uClibc, when using the internal
toolchain backend.
*) It adds an hidden BR2_TOOLCHAIN_HAS_SSP option that gets enabled
when the toolchain has SSP support. Here we have the usual dance:
glibc/eglibc in internal/external backend always select this
option, in the case of uClibc/internal, it gets selected when
BR2_TOOLCHAIN_BUILDROOT_USE_SSP is enabled, in the case of
uClibc/external, there is a new configuration option that the user
must select (or not) depending on whether the toolchain has SSP
support.
*) It adds a new options BR2_ENABLE_SSP in the "Build options" menu,
to enable the usage of SSP support, by adding
-fstack-protector-all to the CFLAGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The HOST_GCC_CONFIGURE_SYMLINK creates a symbolic link
$(@D)/build/configure -> $(@D)/configure for each build step of
gcc. However, it was only using 'ln -s' and not 'ln -sf', which was
causing problems when doing 'make host-gcc-final-reconfigure' for
example, because the configure commands (including this macro) are
being re-executed, but the symbolic link already exists.
Changing this symbolic link creation to 'ln -sf' fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each stage of the gcc build needs to make a small dance before the
configuration step to create a build sub-directory and a symbolic link
to the configure script. The common gcc.mk had a
HOST_GCC_CONFIGURE_SYMLINK already used by the gcc-initial and
gcc-intermediate steps, but the gcc-final step wasn't using it.
This commit fixes this inconsistency, and therefore removes the
HOST_GCC_FINAL_CONFIGURE_SYMLINK macro.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for eglibc 2.17 was added to the internal toolchain
backend for 2013.08. This commit now adds glibc 2.18 support to the
internal toolchain backend.
Since the building procedure is very similar to the one of eglibc, we
have renamed the 'eglibc' package to 'glibc', and made it capable of
handling either glibc or eglibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The option to enable C++ support was still located in
toolchain/toolchain-buildroot/Config.in.2, with misc other toolchain
options. It seems more logical to have this option with the other
options to select the languages supported by the cross-compiler, so we
move it next to the Fortran/Objective-C options in
package/gcc/Config.in.host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Objective-C support in the gcc package by making
sure that the runtime Objective-C library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_OBJC option rather than the non-existing
BR2_GCC_CROSS_OBJC option, to decide whether Objective-C support
should be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Fortran support in the gcc package by making
sure that the runtime Fortran library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text, to no longer mention gcc < 4.2 since they are no longer
supported in Buildroot, and to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_FORTRAN option rather than the non-existing
BR2_GCC_CROSS_FORTRAN option, to decide whether Fortran support should
be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When NPTL support was introduced, gcc required a three stages build
process. Since gcc 4.7, this is no longer necessary, and it is
possible to get back to a two stages build process. This patch takes
advantage of this, by doing a two stages build process when possible.
We introduce a few hidden kconfig options:
* BR2_GCC_VERSION_NEEDS_THREE_STAGE_BUILD, which is set by the gcc
Config.in logic to indicate that the compiler might need a three
stages build. Currently, all versions prior to 4.7.x are selecting
this kconfig option.
* BR2_TOOLCHAIN_LIBC_NEEDS_THREE_STAGE_BUILD, which indicates whether
the C library might need a three stages build. This is the case for
eglibc, and uClibc when NPTL is enabled.
* BR2_TOOLCHAIN_NEEDS_THREE_STAGE_BUILD finally is enabled when both
of the previous options are enabled. It indicates that a three
stages build is actually needed.
In addition to those options, the uClibc/gcc build logic is changed to
use only a two stages build process when possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason, the eglibc.mk file was trying to install libstdc++.so
from eglibc to the target. But the C++ standard library is provided by
GCC, not by the C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The TARGET_{CC,CXX,LD,...} variables no longer contain any --sysroot
option, since we're now using a toolchain wrapper for external
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list, devtmpfs is quite a bit nicer default than
the old static /dev, so change it.
Notice that you NEED to enable CONFIG_DEVTMPFS / CONFIG_DEVTMPFS_MOUNT
in the kernel configuration if you manually build a kernel outside
buildroot, otherwise the rootfs won't work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces a specific BR2_TARGET_GENERIC_GETTY configuration flag.
This eliminates the need for checking if BR2_TARGET_GENERIC_GETTY_PORT is an
empty string or not. It also allows hiding various getty options when getty
isn't enabled.
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "patch" command returns an error code only if patches fail
to apply. Therefore the pipleline "cat <patchfile> | patch ..."
does not fail, even if <patchfile> is missing. Fix this by
adding an explicit check for patch file existence.
Based on feedback from buildroot mailing list, also change the
existing check for unsupported patch format into a fatal error.
Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(BUILD_DIR)/.root rule is executed as part of the 'dirs'
target. The 'dirs' target is re-executed at every execution of 'make
external-deps', and make external-deps explicitly tells make to ignore
targets that have already been made (through the -B option). This
means that the $(BUILD_DIR)/.root rule has to be idempotant, which was
not the case this the introduction of the lib32/lib64 symbolic link.
Running 'make external-deps' three times in a row was sufficient to
trigger an error due to symbolic links being incorrectly created. This
patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Automatic IPv6 Connectivity Configuration Utility for users of a
IPv6 tunnel broker, developed by sixxs.net
[Peter: drop strip patch, pass TARGET_CONFIGURE_OPTS]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix C++ dependency and trailing spaces, drop ';' from fixup hook]
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
tcping does a TCP connect to the given ip/port combination. The user can
specify a timeout in seconds. This is useful in shell scripts running in
firewalled environments. Often SYNs are just being dropped by firewalls,
thus connection establishment will be retried several times (for minutes)
until a TCP timeout is reached. With tcping it is possible to check first
if the desired port is reachable and then start connection establishment.
http://www.linuxco.de/tcping/tcping.html
[Peter: wrap help text, pass TARGET_LDFLAGS]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upgrade to the latest uclinux CVS snapshot, gives us blackfin support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The plugin infrastructure is based on shared objects so it won't build
for static-only scenarios.
And the daemon uses fork() so MMU is required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building for nommu flat targets the CFLAGS/CXXFLAGS/LDFLAGS must be
adjusted accordingly.
For gcc this means passing along -Wl,-elf2flt to signal the linker.
For ld this means -elf2flt.
Also correct the error in STACKSIZE settings from commit 9edf482d which
is setting gcc flags as ld flags and will surely fail (no package uses
it at the moment so it was never seen).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add host-elf2flt to the gcc common dependencies so we get it built after
binutils but before gcc/uclibc since it's required for all packages and
in some uClibc configuration scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support is for pserver mode anonymous CVS.
source-check is based on login since many servers don't support or have
ls/rls disabled.
Usage is pretty straightforward.
PKG_SITE defines the site hostname and remote directory.
The module is defined by the bare package name.
Version is date based.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Triggered by the 'some comment required here', this patch updates the Config.in
comments for the ubifs filesystem image options. This includes:
- 'erase block' --> 'eraseblock' (following mtd online documentation)
- remove 'UBI' prefix to make options uniform. Sometimes the option is not a
property of UBI but rather of the flash. Also, line up the name of the option
with the help of mkfs.ubifs.
- add help text on all options, referring to the mkfs.ubifs/ubinize options
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A port knocking implementation with daemon and user application.
[Peter: drop trailing newline in Config.in]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to how we do it for _PATH / _SYSROOT_DIR. Buildroot gets fairly
confused if the user has set up a custom PKG_CONFIG_LIBDIR, so ensure
it gets unset.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
DEPMOD is already specified in LINUX_MAKE_FLAGS, and is no longer located
in HOST_DIR/usr/sbin after the move to host-kmod, so drop it from here.
Reported-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In BR sub-directory boot/ linux/ and package/ there are a few .mk files which
aren't <package>.mk files. These files shouldn't be taken into account
in package statistics.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 2eb995759 "vsftpd: needs mmu" adds "depends on BR2_TOOLCHAIN_HAS_THREADS".
The build error is:
sysutil.c:(.text+0x37ac): undefined reference to `fork'
Thus it should depend on BR2_USE_MMU rather than BR2_TOOLCHAIN_HAS_THREADS.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host-kmod version of depmod gets installed into HOST_DIR/sbin, so
adjust the path we use to refer to it in linux.mk
Reported-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is required to build custom port drivers/NIFs or code that
uses erl_interface.
Signed-off-by: Hans Bulfone <hans@nil.at>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Parallel 'make install' seems to deadlock here (make 3.81). Work around it
by disabling parallel make for the install step.
We only disable parallel make for the install step, as the build step works
with parallel make, and webkit is a huge package, so build time goes up
significantly with make -j1.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also apply the following patches:
- upstream fix for 32-bit autotools
- upstream fix for conditional gstreamer build of gtklauncher
- upstream fix for detecting the latest harfbuzz
- Update existing patch for disabling docs
- Update existing patch for execinfo_h
- upstream patch for the MIPS DFG support. This fixes
compilation problems on MIPS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding configuration options that if libssh2 is selected, compile libcurl
with --with-ssh config flag.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also cleaned the package makefile up by removing explicitly naming
the source along with moving the configure of the package down below
the standard package declarations.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Lua website says:
"Like most names, it should be written in lower case with an initial capital,
that is, "Lua". Please do not write it as "LUA", which is both ugly and
confusing, because then it becomes an acronym with different meanings for
different people."
http://www.lua.org/about.html
So, let's honor this request in buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, $(PKG)_PATCH allow only to download patches from same URL than tarball.
This patch allow to detect when plain URL are used in $(PKG)_PATCH and correctly
handle them.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If xzcat is not present on the host system, buildroot bails out early asking
the developer to install it (xzcat is now a DL_TOOLS_DEPENDENCY)
Conversely, when BR2_TARGET_ROOTFS_CPIO_XZ is enabled, then host-xz is a
build dependency, and no manual action is required from the developer.
Because the second approach is nicer, also build host-xz when xzcat is not
available, using the host-prerequisite and suitable-host-pkg mechanisms,
already used for tar.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to simplify determining the right extractor tool for a given
file type, this patch introduces a make function 'suitable-extractor'.
Its usage is $(call suitable-extractor,filename), and it returns the
path to the suitable extractor.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream has a large number of patches lined up for the next 0.9.33.x bugfix
release;
http://git.uclibc.org/uClibc/log/?h=0.9.33
Add them here, as atleast some of them are quite critical (E.G. the eventfd
issue gets triggered by recent glib versions).
I've skipped the microblaze and xtensa fixes as we don't currently support
those with 0.9.33.2.
Drop uclibc-0002-Add-definition-of-MSG_WAITFORONE-and-MSG_CMSG_CMSG_CLOEXE.patch
as that is a subset of uclibc-0035-socket.h-pull-socket_type.h-from-eglibc.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Removed patches that were are now in version 2.23 of util-linux along with
fixed up other patches so they apply cleanly.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, all target options lie in the top-level menu.
This looks a bit clumsy, since all other options are neatly
folded into their own sematic sub-menus each.
Move the target option into their own sub-menu too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump for a slew of USB-related and other fixes.
The bcmrpi defconfig is a huge beast with lots of superfluous drivers.
The brcmrpi_quick defconfig is a stripped down minimalist defconfig with
all that is needed to bring up a RPi with complete HW support, and
nothing superfluous, which is what we need for a board's defconfig in
buildroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes and improvements for USB, audio sync, camera support,
codecs, HDMI framerate and audio, and GPU freezes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the past there may have been a very good reason to refer to 'buildroot2', but
these days it's just odd.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gnutls, nss and polarssl backends.
Add support for libidn and zlib.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Brings a number of fixes, and most importantly no longer tries to figure
out if the tree contains uncommitted changes when using svn, as that can
be very slow.
This only syncs with setlocalversion as of 2.6.34 as later kernel versions
aren't directly compatible with our use cases since 09155120c (kbuild:
Clean up and speed up the localversion logic).
We still have one delta from the kernel version (setlocalversion: fix i18n
issue with svn), as that has only later been fixed in the kernel version.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So we don't end up pulling in host-busybox (which doesn't exist) if
KMOD_TOOLS is enabled.
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Looks like this was lost in 20d4792e.
[Peter: use _INSTALL_INIT_SYSV, explicitly delete script on uninstall]
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpthread.so has a special stripping condition to preserve parts of
it that are needed for debugging. However, due to the usage of 'xargs'
instead of 'xargs -r', the strip command is executed regardless of
whether a libpthread.so file is found or not. This leads to a big
error message being displayed in static-only builds, because strip is
executed without a file argument. Thanks to the '|| true', the build
continues, but still shows a big error message in the middle, which is
not nice.
By using 'xargs -r', we avoid the strip command from being executed
when 'find' doesn't find any match. We also remove the '|| true' to
catch other real errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit removes the module-init-tools package and adds the
relevant Config.in.legacy entries to ease the migration for users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since module-init-tools is deprecated, we now want to use kmod instead
for the installation of modules during the kernel build process. In
order to do this, we need to be able to build a host variant of kmod,
which is want this patch allows to do.
Note that only the depmod tool is installed on the host, since that's
the only one likely to be used on the host in a cross-compilation
context.
[Peter: needs AUTORECONF for the host as well. Fix comment while we're at it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KMOD_INSTALL_TOOLS macro uses a non-conventional indentation. This
commit fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to be sure that we just deal with the includes related with
the actual package described into libffi.mk it is better to explicitly
specify the version of the libffi we deal with into the post install
hook.
As dev files are deprecated in target rootfs target post install
hook was also deleted.
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsecret is a library for storing and retrieving passwords
and other secrets. It communicates with the "Secret Service"
using DBus. gnome-keyring and ksecretservice are both
implementations of a Secret Service.
libsecret replaces libgnome-keyring.
https://wiki.gnome.org/Libsecret
[Peter: also needs host-intltool]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds very basic support to build for the Nios II
architecture. Toolchain support is still missing and instead
we need to use an external custom toolchain.
Notice that this architecture had been previously removed in
Buildroot 2010.05-rc1 release (as explained in the CHANGES file)
and this commit adds it back.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make it use external instead of bundled libevent - it's better for size
reasons (avoiding possible duplication) and security reasons (easier to
upgrade one global library than possibly two or more, and generally
upstream would probably be more responsive to those).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The strongswan configure.in uses the AC_LIB_PREFIX macro, which adds
--with-lib-prefix and --without-lib-prefix options, and which, by
default assumes that adding ${prefix}/lib to LDFLAGS and
${prefix}/include to CPPFLAGS is a good idea. Obviously, when
cross-compiling, it is definitely not a good idea.
In the specific case of strongswan, the result is that when testing if
the backtrace() function was available, the small C program was being
built and linked with -L/usr/lib. So when the host architecture and
target architecture are identical, it may find the backtrace()
function in the host C library, without looking at the target C
library:
configure:16457: /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/usr/bin/x86_64-unknown-linux-uclibc-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -L/usr/lib conftest.c >&5
/home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/bin/ld: warning: libc.so.0, needed by /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/lib/../lib64/libgcc_s.so, may conflict with libc.so.6
Passing --without-lib-prefix prevents this default behavior from
happening, and no stupid value is added to CPPFLAGS or LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MesaLib 7.10.3 tarball has been moved on ftp.freedesktop.org from
pub/mesa/7.10.3/ to pub/mesa/old_versions/7.x/7.10.3/.
A bump to a newer release is only coming after Buildroot 2013.08, so for now
let us just change URL to let the download work properly.
Reported-by: Ryan Wilkins <ryan@deadfrog.net>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of redis fail to build when ccache is enabled, due to one of our
own patches. The construct
make CC=$(CC) target1 target2
would result in
make CC=ccache <tuple>-gcc target1 target2
and here <tuple>-gcc would be treated as a target and the compiler used
would be just 'ccache'.
Reported-by: Johan Sagaert <sagaert.johan@skynet.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5628776c4a
"toolchain-external: fix lib64 symlinks"
lib64 is a symlink to lib so there is no reason to copy the libraries
to lib64 anymore. This fixes multiple building problems
for buildroot toolchains:
[...]
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libuClibc-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libuClibc-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil.so.0'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil.so.0'
are the same file
rmdir: failed to remove
'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64': Not a directory
[...]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON library can either be compiled without XML support, with XML
support provided by Expat, or with XML support provided by
libxml2. Until now, to represent this, a Kconfig 'choice..endchoice'
was used. Unfortunately, another package cannot 'select' one of the
possible choices. So for example, a package such as 'rpm', or the
to-be-added 'subversion' package could not select their dependencies,
they had to do a 'depends on !BR2_PACKAGE_NEON_NOXML', which is not
how Buildroot handles library dependencies in general.
So, this commit replaces the 'choice...endchoice' block with simply
two configuration options that are mutually exclusive. The option
names are not changed, so no Config.in.legacy addition is needed.
An hidden option BR2_PACKAGE_NEON_XML is provided, so that packages
that need XML support in NEON but don't care whether it's provided by
Expat or libxml2 can simply select BR2_PACKAGE_NEON_XML.
The rpm package is updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
minidlna will detect and use the libiconv library if
the package is selected. In that case, we need to link
against -liconv.
Fixes the following linking problem:
tagutils/tagutils.o: In function `do_iconv.constprop.6':
tagutils.c:(.text+0x4d5c): undefined reference to `libiconv_open'
tagutils.c:(.text+0x4da0): undefined reference to `libiconv'
tagutils.c:(.text+0x4e08): undefined reference to `libiconv_close'
[Peter: wrap COMMON_LIBS line]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Always link lib64 or lib32 to lib
* Only copy the architecture's lib directory to staging
* Also cleanup a couple of mkdirs (concerning some 'lib' directories).
Before this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:26 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
drwxr-xr-x 5 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/lib': Too many levels of symbolic links
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/lib': Too many levels of symbolic links
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_files.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nis.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_compat.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nisplus.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libutil.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libthread_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcidn.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcrypt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libm.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_hesiod.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnsl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/librt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libanl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libBrokenLocale.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_dns.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libresolv.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libdl.so
./target/etc/resolv.conf
./target/dev/log
After this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64 -> lib/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64 -> lib/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
./target/etc/resolv.conf
./target/dev/log
Fixes http://autobuild.buildroot.net/results/23fb6b1479d2b5906b72c9437b06ab4700ff246d/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON intrinsics used by Pulseaudio are only available in either
-mfloat-abi=softfp or -mfloat-abi=hard, not in
-mfloat-abi=soft. Therefore having NEON support in the processor is
not sufficient, we also should *not* be using soft-float.
Moreover, looking at BR2_ARM_ENABLE_NEON to know if the processor has
NEON support is incorrect. This option is only here to allow the user
to tell whether the processor has NEON support or not, for the ARM
cores that only have optional NEON support. Instead, the
BR2_ARM_CPU_HAS_NEON option really indicates whether NEON is available
or not (it is either set automatically by the ARM cores that always
have NEON support, or when BR2_ARM_ENABLE_NEON is enabled by the user
to confirm that his ARM processor has NEON support).
This fixes build failures such as
http://autobuild.buildroot.org/results/675/675c96059be348b594cc92980bef391126931c83/build-end.log
[Peter: add comment about reason for soft abi check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code to set ABI on ARM does the following:
ifeq ($(BR2_arm)$(BR2_armeb),y)
... set ABI without 'hf' suffix ...
else ifeq ($(BR2_ARM_EABIHF),y)
... set ABI with 'hf' suffix ...
endif
But since $(BR2_arm)$(BR2_armeb) will always be 'y' in the cases where
BR2_ARM_EABIHF is 'y', it means that the 'else' part of the condition
will never be used.
Fix this by appending 'hf' to the ABI variable when BR2_ARM_EABIHF is
selected.
[Peter: put EABIhf handling under arm/armeb conditional for consistency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several of the lines in S50sshd script have a strange mix of spaces
and tabs, that at least do not look consistent with neighboring lines.
This patch makes the spacing consistent, and also strips the trailing
spaces.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(TARGET_DIR) variable is required when building
python-setuptools for the target otherwise the build system detects
the host installation which leads to permission error problems
like these:
Setuptools installation detected at /usr/lib64/python2.7/site-packages
Renaming /usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info to
/usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info.OLD.1377005697.88
OSError: [Errno 13] Permission denied
Moreover, remove the PYTHONPATH variable for host variant since it's
not needed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If the file to be patched is missing, then `patch' will interactively
ask for a file to be patched. This is annoying in e.g. the autobuilders
because they have to wait for a timeout instead of failing.
Giving the '-t' (batch mode) option to patch fixes this: it will skip the
missing file, and return a non-zero exit code. So the build cleanly
fails.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit fde2605765 (Makefile: test before search for kernel modules)
changed the way we strip kernel modules, but it fails when modules aren't
available (as test -d returns with a non zero exit code).
Fix it by including the test -d call in a proper shell conditional.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 'find $(TARGET_DIR)/lib/modules' used to find and strip kernel
modules fails when no kernel modules have been installed. While the
'|| true' prevents the entire build from failing, there are still some
error messages displayed, which is not nice.
Instead, test if the directory exists before doing the find. We also
remove the '|| true' in order to really abort the build if a
problematic error occurs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Just like 'attr', 'acl' doesn't use automake to control the
build/installation of its components, and the static-only installation
process was not installing libacl.a. We add a patch that fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
When attr is built static-only, it forgets to install its libattr.a
file, which leads to the build failure of packages such as 'acl' that
rely on attr.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
'cut' needs to be invoked with the -s option to make sure it doesn't
print anything when the delimiter isn't found. This is particularly
important for the charmap detection, because UTF-8 is appended if
the charmap is empty. But without -s, it will never be empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt5 upstream URL has changed, which leads to build failures in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See Source/WTF/wtf/Platform.h. Webkit is only supported for
arm, armeb, i386, mips, mipsel, powerpc, sh, sparc, x86_64.
[Thomas P: propagate dependency to the midori package.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Linux Containers (LXC), provides the ability to group and isolate
of a set of processes in a jail by virtualizing and accounting the
kernel resources. It is similar to Linux-Vserver or Openvz.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the duma memory debugging library. This is based on an earlier
patch by Baruch Siach, with minor changes to build for latest
buildroot sources.
[Thomas P: misc cleanups, drop non-C++ support as it wasn't compiling,
added thread dependency.]
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Originally, the <pkg>-rebuild and <pkg>-reconfigure targets were meant
to restart the build of the package from a given step (build for
<pkg>-rebuild and configure for <pkg>-reconfigure) and then re-create
the entire root filesystem.
However, further discussion from the community has shown that this is
not really the desired behavior: we instead want <pkg>-rebuild and
<pkg>-reconfigure to only take care of rebuilding the given package,
and not the entire root filesystem.
People willing to rebuild this package and the root filesystem can do:
make <pkg>-rebuild all
[Thomas P: rewrite commit log, since it's not fixing a bug, but
instead changing what was an intended behavior. ]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying a floating tag like HEAD for a repository version is bad practice,
as it results in non-reproducible builds. This patch removes the default
assignment of HEAD as version when a custom git repository is used for the
Linux kernel.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
An MVC web framework for Lua
[Thomas P: add patch to fix installation procedure, and use the
provided Makefile for installation. Remove build-time dependency on
wsapi since there's nothing to build in 'orbit'. Remove run-time
dependency on 'rings', since it's not clear why Orbit would depend on
that.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luasql is a uniform frontend for multiple DB backends.
[Thomas P: update version to 2.3.0 available from Github, as suggested
by François Perrad. Fix .mk header. Use a LUASQL_MAKE_FLAGS variable,
which is more commonly used.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LuaSec is a Lua binding for OpenSSL library to provide TLS/SSL
communication.
[Thomas: adjust header in .mk file, add missing 'mkdir -p' before
installation, remove useless quotes.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change license to GPLv2+, slightly reword Config.in
description, add a BR2_arm dependency.]
Signed-off-by: Paul B. Henson <henson@acm.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the host-ccache build target from BASE_TARGETS in Makefile
to an actual host prerequisite in support/dependencies. This causes
host-ccache to be built as part of the dependencies, before any real package
is built.
Since the dependencies are built without ccache anyway, there is no need to
set HOST_CCACHE_CONF_ENV anymore.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch forces the plain host compiler to be used during the building of
dependencies, without ccache as it is not yet built.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external-toolchain infrastructure creates symbolic links for all
tools in the host directory. However, when buildroot builds its own
version of a cross debugger (BR2_PACKAGE_HOST_GDB), and the toolchain
also provides a cross debugger, there would be two symbolic links for
gdb in the host directory, which is confusing.
An example use case is where the external toolchain only provides a
64-bit gdbserver (e.g. Cavium Networks SDK) but the target is completely
32-bit (e.g. n32 ABI). In this case, using gdbserver on target requires
copying a bunch of 64-bit libraries to the target as well, just for gdb.
In this case, one can let buildroot build both gdbserver as cross-gdb
(both in 32-bit).
This patch modifies the symlink creation so that no gdb (or gdbtui)
symlink is created if buildroot is going to build a cross-gdb.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the addition of root password setting support in buildroot, there have
been a few bug reports in this area ([1], [2]). In these cases, the system
mkpasswd did either not work, or did not provide the options we expect, like
-m <method>.
This patch adds a mkpasswd host package, based on the sources from whois. When
a non-empty root password is set, this package is used as a dependency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2013-July/075771.html
[2] http://lists.busybox.net/pipermail/buildroot/2013-July/075869.html
[Thomas P: use $(INSTALL) instead of install, put -lcrypt at the end
of build command line to allow gcc to find the crypt() function in
lcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Arnout noted, we removed the BR2_ARM_OABI option without adding the
corresponding option in Config.in.legacy, so users upgrading to
Buildroot 2013.08 with an OABI configuration would get migrated
automatically to EABI without any warning.
This commit introduces such a legacy option, so that such users would
be explicitly warned about the removal of OABI support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On architectures that lack a MMU (like blackfin) uclibc just undefined
ARCH_HAS_MMU which disabled ARCH_USE_MMU.
But for other architectures which may or may not have one like ARM we
need to set this according to user choice.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set busybox .config CONFIG_NOMMU appropiately and streamline this new
setting with the previous BUSYBOX_DISABLE_MMU_APPLETS in a single
BUSYBOX_SET_MMU definition (since it's not just applets now).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the contribute manual section by adding an explanation about patch
review and version.
The section now provides advices in how to respond maintainers requests and how
to proceed on replying them.
[Thomas: further small modifications.]
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 3.10.x kernels fail to build with the following message:
vsprintf.c:(.text+0x17e0): relocation truncated to fit: R_AVR32_16N_PCREL against symbol `_ctype' defined in .text section in lib/lib.a(ctype.o)
While this is most likely a toolchain issue, but since AVR32 isn't a
well-maintained architecture, there's not much we can do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Samuel: add precision about non-tar archive]
[Thomas: reword with more details. Fix commit title]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While reviewing the eglibc package, Peter mentionned that it would be
good to add a comment that explains why we explicitly build eglibc
with -O2 instead of using the user selected optimization level. This
commit add such a comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gpu-viv-bin-mx6q package selects BR2_PACKAGE_HAS_OPENGL_EGL and
BR2_PACKAGE_HAS_OPENGL_ES, so when it is enabled, Buildroot believes
that OpenGL and EGL support is available.
However, both libgles.mk and libegl.mk do not add the dependency on
gpu-viv-bin-mx6q, so when pulling the libgles or libegl dependencies,
the build fails due to the absence of an OpenGL implementation. This
commit fixes that.
Fixes the build failure at
http://autobuild.buildroot.org/results/dbd/dbd938914883a9e205f967f7b4b4a8a7dc7be117/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the trace-cmd tool. This tool is a
command line front end of ftrace. It collects traces on your target.
You can analyse these traces on the target or on the host via the gui
"kernel shark".
[Thomas: use TARGET_CONFIGURE_OPTS, define _GNU_SOURCE to get
O_CLOEXEC definition on uClibc, add thread and largefile
dependencies.]
Signed-off-by: Pierre Floury <pierre.floury@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_LINUX_KERNEL_INSTALL_TARGET option not only copies the kernel
image to /boot, but also the DTBs, if such DTBs are generated by the
build process. It makes sense to mention that in the help text of this
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target for building the kernel with a cpio initramfs is not
calling the append dtb commands, creating a final kernel image
without an appended dtb. Instead it needs to call kernel make on
the intermediate target, then call the append dtb commands
to produce the final image as the primary kernel build target
does.
Signed-off-by: Nathan Ford <nford@westpond.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes bug #5516 - appended device tree blobs on uImage fails
Before version 3.7 of the kernel, building the zImage and then the
uImage will rewrite the zImage in the process, removing the device tree
we just appended.
Use mkimage to append the device tree to the uImage and rebuild the
headers directly.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgpgme has an internal implementation of argp parsing for when the
libc lacks such an implementation (i.e. uClibc).
However if it detects argp.h the internal implementation is disabled and
for a uClibc-based toolchain that breaks the build.
This happens when argp-standalone is installed since libgpgme never
tries to link to libargp.
Make it link against libargp, which also saves some target size. Fixes:
http://autobuild.buildroot.net/results/33c/33c5776d2b3f7fa276a27f7602eb71c4d77c7b62/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev-182 requires several groups to be resolvable at udev startup,
including disk, cdrom, floppy, tape, audio, video, lp, tty, dialout,
and kmem. Only some of these are in the default skeleton's group
file, So let's add the missing groups, and plugdev too.
This avoids getting these logs in /var/logs/messages:
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'dialout' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'kmem' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'video' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'lp' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'floppy' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'cdrom' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'tape' unknown
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: reformat header and Config.in help text, add dependency on
glibc since cppcms uses <monetary.h> functions that aren't available
in uClibc.]
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 1c834dd1ce.
This patch has been mistakenly applied, while a new version of it had
already been merged. Thanks Gustavo for noticing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsoup doesn't use intl stuff directly, but uses gi18n. libglib2
already has all required dependencies on gettext.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on gettext comes from libglib2, not from gdk-pixbuf
itself.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on gettext is only due to libglib2, not due to
pulseaudio itself. It works fine without gettext if libglib2 is
not selected.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Packaging pmake was required when we used the upstream libedit.
Since we have switched to using the autotools-based libedit,
pmake is no longer needed.
Because pmake is quite ugly, let's just drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream libedit does not have a proper homepage, and does not provide
any sort of packaging whatsoever. So far, we used Debian's wayback
machine to get a tarball of a rather oldish libedit.
As Thomas pointed out, someone has been maintaining a proper autotools
based, up-to-date package for a while.
While Debian is stuck to 2.11 (5 years old now), we bump to 3.1 as a bonus.
Remove our libedit.pc, it's now bundled with the package.
Reported-by: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
strongSwan is an OpenSource IPsec implementation for the Linux
operating system. It is based on the discontinued FreeS/WAN project
and the X.509 patch.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds libcec for HDMI device control. It enables Raspberry Pi
support if the rpi-userland package is installed.
[Thomas: add C++ dependency, reformat .mk header.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add lockdev a package for locking devices.
[Thomas: change location in menuconfig, reformat header in .mk file.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: implement simplifications suggested by Thomas De
Schampheleire, add missing 'depends' on required toolchain features.]
Signed-off-by: Paul B. Henson <henson@acm.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: added patch to disable build of tests that fail on uClibc,
added dependencies for architectures that are supported.]
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: rename package to sunxi-cedarx, improve help text
description, install libraries with executable permissions to make
sure they get stripped at the end of the build.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove trailing whitespace, install libraries with execution
permissions so that they get stripped by Buildroot, r2p4 is only
available on EABI toolchains, r3p0 on EABIhf toolchains.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes the nightly build failure caused by tstools. It is
back ported from recent upstream commit
0e8463ea1dc55f566a88bb3df29cf3d5f23cc326.
Once the upstream update the download page with more recent source
tarball, this will no longer be needed.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's also done in the kernel configuration, however users may be using
some other pre-built kernel and miss functionality like firmware
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SER2NET_AUTORECONF is needed because of libtool version mismatch.
See error message bellow:
/bin/bash ./libtool --tag=CC --mode=link gcc -Wall -g -O2 -o
ser2net controller.o dataxfer.o devcfg.o readconfig.o selector.o
ser2net.o utils.o telnet.o buffer.o -lnsl
libtool: Version mismatch error. This is libtool 2.4.2
Debian-2.4.2-1ubuntu1, but the
libtool: definition of this LT_INIT comes from libtool 2.2.6b.
libtool: You should recreate aclocal.m4 with macros from libtool 2.4.2
Debian-2.4.2-1ubuntu1
libtool: and run autoconf again.
make: *** [ser2net] Error 63
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tclsh is installed with its version number (tclshx.y) but scripts (like
usb_modeswitch_dispatcher) are calling tclsh, not tclshx.y.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Stripping is done at the end of the buildroot process, for all files at
once.
There's no need to do it here.
(Suggested by Thomas Petazzoni)
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
v0.1.2 update build system from autotools to cmake.
[Thomas: add patch to ensure the CMake build system only checks for a
C compiler and not a C++ compiler]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The -perm +mode is deprecated, and sometimes yields suprising results.
It can be confused with permission in symbolic mode, for example '+u+g',
as POSIX spec suggests.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dropwatch requires thread support because it selects libnl that
depends on thread support. Also dropwatch cannot build on AArch64,
because it selects the target binutils package which isn't (yet)
available on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
usb_modeswitch_data unconditionally selects usb_modeswitch, but
usb_modeswitch depends on thread support. This commit has the thread
support dependency to usb_modeswitch_data.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a dependency of the libglib2 package on thread
support in the toolchain, since upstream libglib2 doesn't build
without thread support. The commit is rather large as it involves
propagating the dependency on thread support to all reverse
dependencies of the libglib2 package.
[Thomas: squash all patches into one, make a few minor fixes, the most
important one being to not add comments about MMU requirement when a
package doesn't work on !MMU platforms.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Some toolchains, like the Cavium Networks' one, have lib32/ and lib64/
directories, while the standard lib/ is empty. To find libc.a, buildroot
currently only looks in lib/ and lib64/. This patch extends the search
to lib32/ as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Blackfin for FDPIC targets uses *-linux-*, however for FLAT targets it
needs *-uclinux-* in order for gcc to build properly.
[Thomas: use a TARGET_OS variable instead of redefining
GNU_TARGET_NAME completely]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've dropped 0.9.31.x we can use the startfiles /
install_startfiles targets instead of building and installing them by
hand.
Fixes internal blackfin toolchain build errors regarding crtreloc.o
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: properly indent help text, add largefile dependency, remove
unneeded libpcap dependency, remove unneeded CLEAN_CMDS, reorder build
and install commands, remove uneeded <pkg>_INSTALL_STAGING,
<pkg>_INSTALL_TARGET and <pkg>_INSTALL_IMAGES variables, move from
package/multimedia/ to package/, add license details, rename patch to
remove version number in the patch filename.]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current SSP handling is incomplete.
First we need to build uClibc with SSP support for a complete
"experience".
Second, it doesn't hurt to add -fstack-protector-all to the
CFLAGS/CXXFLAGS since most users would expect buildroot to do this
rather than adding the flags themselves.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directfb example program df_dok now requires rose.png to be
installed, otherwise it gives the following error:
(#) DirectFBError [dfb->CreateImageProvider( dfb, DATADIR"/rose.png", &provider )]: A general or unknown error occured
Therefore add rose.png to the list of data files if df_dok is enabled.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes "Value too large for defined data type" messages caused by fstat
syscall wrapper returning -EOVERFLOW.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some platforms, the standard U-Boot binary is not called u-boot.bin,
but u-boot<something>.bin. This is for example the case on the
Cavium-provided u-boot, where the output file is called
u-boot_<boardname>.bin.
This patch adds a 'custom format' choice in the existing u-boot binary
format selection, where this name can be put. In the Cavium example, this
option could be set to:
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-$(BR2_TARGET_UBOOT_BOARDNAME).bin"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: fix help text & license, needs host-pkgconf]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
pkg-download.mk contains some helper functions to obtain subparts of URLs,
like the URI scheme. In pkg-generic.mk, there is still one opportunity to use
that helper function, instead of hardcoding it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The linux kernel and uboot specify -msoft-float in order to prevent floating
point code from being generated. This causes a conflict when -mfloat-abi=hard
or -mfloat-abi options are specified in the wrapper. This patch removes the
-mfloat-abi option from the options generated by the wrapper only when
-msoft-float, -mhard-float or -mfloat-abi are specified by the user.
[Peter: fix !BR_FLOAT_ABI case, simplify]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, it fails even in official form
(COMPILE_IN_THUMB_MODE=y) so just build it in ARM mode since EABI
mandates interworking.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, so build it in ARM mode, EABI mandates
interworking so this isn't an issue.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmudflap doesn't build for a thumb(1) toolchain so disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In early buildroot, it apparently was customary to have following style in
Config.in files:
bool"expat"
Nowadays, only two packages remain with this style: diffutils and expat.
This trivial patch lines them up with the style:
bool "expat"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch creates a config option for the ISC DHCP server to allow passing
--enable-delayed-ack to its configure script.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These were required with ARC gcc 4.4.7; ARC gcc 4.8 has been changed
to behave the same as other architectures with -nostdlib, making this
option obsolete.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes multiple issues, including:
- 'operand out of range' errors (due to defaulting to
medium calls instead of short calls)
- library dependencies that were not being found
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If BR_DEBUG_WRAPPER is set in the envirnment, dump the actual command
being exec()uted, to ease debugging issues with the wrapper.
[Peter: adjust code style and output format to be cut'n'paste compatible]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of over-writing the nsswitch.conf file (which may already contain
user's specific configuration if it comes from a custom skeleton), just
replace the 'hosts' line.
Remove now-useless custom nsswitch.conf file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In buildroot, the avahi socket is located in /var/run/avahi-daemon,
not in /usr/var/run/avahi-daemon/socket.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump for a few fixes:
- fix for slow SDcards
- fix for USB interrupts
- fix for tracing functions
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the move of uclibc to package/uclibc, the uclibc-menuconfig target now
depends on uclibc-configure, which brings in the build of
binutils/gcc-initial/mpfr/gmp, causing it to take ages with a clean tree.
Fix it by moving the basic .config mangling to the patch step, and depend
on that for menuconfig instead.
Notice that this is broken for _OVERRIDE_SRCDIR users, just like for
busybox, but as that is presumably a small subset of the buildroot
user base (and these advanced users can just run menuconfig in their
local uClibc tree), so this is considered the lesser evil of the two.
The proposed out-of-tree build series will also cause problems with
this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With modern shells, we can simply do test using the "$(...)" = "value"
form. This commit gets rid of the x$(...) = x"value" constructs and
replaces == by =, which is the correct operator to test the equality
of two strings with the test program.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following the introduction of the support of EABIhf as a second ARM
ABI, it is important to check whether the external toolchain provided
by the user actually uses the ABI that has been selected in the
Buildroot configuration. This commit introduces such a check by
looking at the 'Tag_ABI_VFP_args' tag of the architecture-specific
section of the ELF headers. This assumes that ELF is the binary format
used on ARM, which may not be the case on ARM noMMU systems (they use
the FLAT binary format), but Buildroot doesn't have support for such
systems at the moment.
Also ensure the correct CFLAGS are passed to the cross compiler for the
test, so the correct variant is used in case the toolchain is multilib.
[Peter: mention CFLAGS change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noted by Yann E. Morin, the x$(...) = x"value" syntax is old and
ugly, and the easier to read "$(...)" = "value" can now be used
without problems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds three patches to uClibc that are needed to make
Thumb2 support work properly:
uclibc-0006-arm-clone-restore-stack-pointer-just-after-return-fr.patch
uclibc-0007-arm-clone.S-Add-missing-IT-instruction-for-Thumb2.patch
uclibc-0008-arm-move-check-for-BX-to-its-own-header.patch
The first one is a necessary dependency of the second one. Both of
those patches have already been merged upstream, after 0.9.33.2. The
third one hasn't been merged upstream yet, but it has already been
submitted a while ago by Yann E. Morin, without receiving attention
from upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation to the addition of more patches that require a correct
ordering, rename uClibc 0.9.33.2 patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using eglibc, the ld-linux loader is installed as
ld-linux-armhf.so.3, but gcc 4.7.x was not yet updated, and generates
binaries that reference ld-linux.so.3. This was fixed starting with
gcc 4.8.x. In order to be able to use gcc 4.7, we create the
appropriate symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The introduction of the EABIhf ABI requires a few updates to the
configuration options for external toolchains, in order to ensure that
the user doesn't do any invalid selection. In detail:
* The Linaro ARM toolchains now depend on BR2_ARM_EABIHF, because
that's the ABI they use, and it is incompatible with EABI. The
comment about the availability of Linaro toolchains is updated to
inform users selecting EABI that they should select EABIhf if they
want to see Linaro toolchains.
* The Sourcery CodeBench toolchains now depend on BR2_ARM_EABI,
because that's the ABI they use. A comment is added to inform users
that have selected EABIhf that Sourcery CodeBench are only
available when EABI is used.
* The Arago toolchains now depend on BR2_ARM_EABI, because that's the
ABI they use. The description of the ARMv7 Arago toolchain is also
slightly improved.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we have a much better way of selecting between the various
VFP versions and capabilities, the BR2_VFP_FLOAT version no longer
makes sense. This commit gets rid of it, and adds the appropriate
Config.in.legacy code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in gcc 4.6.x, so versions
earlier than this one should not be used when EABIhf is selected.
The ARM VFPv4 support was introduced in gcc 4.5.x, so versions earlier
than this one should not be used when VFPv4 is used.
[Peter: drop OABI dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in Binutils 2.22, so earlier
versions should not be selected when EABIhf is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces the support for the EABIhf ABI, next to the
existing support we have for EABI and OABI (even though OABI support
is deprecated). EABIhf allows to improve performance of floating point
workload by using floating point registers to transfer floating point
arguments when calling functions, instead of using integer registers
to do, as is done in the 'softfp' floating point model of EABI.
In addition to this, this commit introduces a list of options for the
floating point support:
* Software floating point
* VFP
* VFPv3
* VFPv3-D16
* VFPv4
* VFPv4-D16
and it introduces some logic to make sure the options are only visible
when it makes sense, depending on the ARM core being selected. This is
however made complicated by the fact that certain VFP capabilities are
mandatory on some cores, but optional on some other cores. The kconfig
logic tries to achieve the following goals:
* Hide options that are definitely not possible.
* Use safe default values (i.e for Cortex-A5 and A7, the presence of
the VFPv4 unit is optional, so we default on software floating
point on these cores)..
* Show the available possibilities, even if some of them are not
necessarily working on a particular core (again, for the Cortex-A5
and A7 cores, there is no way of knowing whether the particular
variant used by the user has VFPv4 or not, so we select software
floating point by default, but still show VFP/VFPv3/VFPv4 options).
It is worth noting that this commit doesn't add support for all
possible -mfpu= values on ARM. We haven't added support for fpa, fpe2,
fpe3, maverick (those four are only used on very old ARM cores), for
vfpv3-fp16, vfpv3-d16-fp16, vfpv3xd, vfpv3xd-fp16, neon-fp16,
vfpv4-sp-d16. They can be added quite easily if needed thanks to the
new organization of the Config.in options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we are going to introduced a more advanced support of floating
point options for the ARM architecture, we need to adjust how the
soft-float option is handled. We replace the current hidden option
BR2_PREFER_SOFT_FLOAT option and the visible BR2_SOFT_FLOAT option by:
* A global hidden BR2_SOFT_FLOAT option, defined in arch/Config.in,
that tells whether the architecture-specific code is using software
emulated floating point. This hidden option can be used throughout
Buildroot to determine whether soft float is used or not.
* Per-architecture visible BR2_<arch>_SOFT_FLOAT options, for the
architecture for which it makes sense, which allows users to select
soft float emulation when needed.
This change will allow each architecture to have a different way of
presenting its floating point capabilities.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libsvg-cairo provides the ability to render SVG content from files or
buffers. All rendering is performed using the cairo rendering library.
[Peter: license is LGPLv2.1+]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libosip2 appears to have support for the "ARC standard" (Advanced
RISC Computing), which is unrelated to Synopsys DesignWare ARC
processors. The check for this involves verifying the existence of
the "__arc__" macro. Unfortunately, this macro is also present
as a predefined built-in for the ARC processors, resulting into
build failures.
[Peter: add short comment in .mk files as well]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OABI is more than legacy, it's dead.
New developments should go with EABI, since it so much better.
>From the Debian EABI page [0] :
- floating point performance, with or without an FPU is very much faster
- mixing soft and hardfloat code is possible
- structure packing is not as painful as it used to be
- a more efficient syscall convention
- more compatibility with various tools
[0] http://wiki.debian.org/ArmEabiPort
[Thomas: keep the ABI choice, as we are going to introduce EABIhf later].
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When refactoring the internal toolchain backend logic, the code was
changed to pass the custom configure options given through
BR2_EXTRA_GCC_CONFIG_OPTIONS only for the gcc final pass, with the
idea that we're only interested by user customization for the final
compiler.
However, the beaglebone_defconfig was passing --with-float=hard
--with-fpu=vfpv3-d16 as BR2_EXTRA_GCC_CONFIG_OPTIONS, and since the
refactoring, it was causing build failures of the beaglebone_defconfig
(with messages saying that Busybox is built to use VFP arguments, but
libc/libm are not). This is due to the fact that the gcc intermediate,
which is used to build the C library, wasn't built to generate hard
float, while the final compiler was generating hard float.
So, we get back to the original situation where the options in
BR2_EXTRA_GCC_CONFIG_OPTIONS are passed to all of the compiler
passes. Of course, the specific case of hard float will be fixed by
following patches in this area, but the idea still remains: the three
gcc should have the same options, if those options affected the ABI of
the generated code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On Gentoo systems with ruby installed RUBYOPT is set and causes build
breakage for some packages that needs host-ruby (example: webkit).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b48b48034 ("add a know to enable/disable building a shared
libgcc"), from october 2006, isn't really as to why a
BR2_GCC_SHARED_LIBGCC option was needed. However, now that gcc has
been converted to the package infrastructure, it causes problems
because the host packages are always being passed --enable-shared
--disable-static, so re-adding --disable-shared on top of that break
things.
Moreover, our tests indicate that both a shared *and* a static version
of libgcc are built, and that linking dynamically and statically a
program that uses libgcc_s gives correct results: dynamically linked
against libgcc_s in the first case, statically linked in the second
case.
Therefore, it appears that this option is no longer necessary, and
removing it has the advantage of fixing the builds of
qemu_mips64_malta_defconfig and qemu_sparc_ss10_defconfig, both of
which had BR2_GCC_SHARED_LIBGCC not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is GPLv2, fix license file, drop unneeded standard include]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also move smtpd.py removal to the global remove useless files define.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorder the external python modules menu entry so that it belongs under
python(2) and not under python3 to avoid confusion.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This adds a patch that adds the __kernel_long and __kernel_ulong types to
uClibc. This fixes the build failure with Linux 3.10 headers.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.
This option allows passing zero or more additional arguments to each
post-build or post-image script.
The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.
[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In 25c3160092 ("uClibc 0.9.31: remove stray kludges/conditions"), a
conditional that prevents the combination gcc 4.2-avr / C++ / locale
with uClibc 0.9.31 was removed. However, it turns out that the same
problem is affecting uClibc 0.9.33, described at
http://comments.gmane.org/gmane.comp.lib.uclibc.buildroot/24260.
Therefore, we prevent the combination of gcc 4.2-avr / C++ / locale to
happen.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU Ocrad is an OCR (Optical Character Recognition) program
based on a feature extraction method.
It reads images in pbm (bitmap), pgm (greyscale) or ppm (color) formats
and produces text in byte (8-bit) or UTF-8 formats.
[Peter: fixup whitespace, install into STAGING_DIR, use make install, BR2_GNU_MIRROR]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initramfs compression does not make much sense for the architectures
that support compressed kernel images because in this case the data
would be compressed twice. This will eventually result in a bigger
kernel image and time overhead when uncompressing it.
The only reason to use compressed initramfs is to reduce memory
usage when the kernel prepares rootfs, and both the unpacked
filesystem and initramfs.cpio are present in the memory.
Buildroot attempts to force GZIP compression for initramfs,
however it doesn't always work because initramfs compression mode
depends on RAM disk compression supported by the kernel.
Thus, CONFIG_INITRAMFS_COMPRESSION_GZIP depends on CONFIG_RD_GZIP.
If CONFIG_RD_GZIP is not set, setting GZIP initramfs compression
will have no effect.
Besides, the kernel also supports other compression methods,
like BZIP2, LZMA, XZ and LZO. Forcing the good old GZIP does not
really make much sense any more.
This removes initramfs compression settings from Buildroot,
so that the default value preset in the kernel config is used,
which is CONFIG_INITRAMFS_COMPRESSION_NONE.
If initramfs compression is still needed, it can be set
in the kernel config (using make linux-menuconfig)
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The udhcp.busybox.net site is gone, it's now pointing to bugzilla.
udhcp has been a part of busybox for some time now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While at it add the missing network interfaces to configurations that
support it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add uClibc upstream patch to support __kernel_long and __kernel_ulong
datatypes as used by kernel headers 3.10+
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... for a truck-load of memory-leak and other various fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package/efl/libevas/libevas-fix-xcb-backend-typo.patch patch is
removed, as it has been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All the EFL components are released simultaneously, with an identical
version number, just like all Qt5 components for example. So it makes
sense to have a single EFL_VERSION variable in package/efl/efl.mk that
is used by all the packages in package/efl/*/*.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Misc fixes and enhancements:
- faster image blitting in framebuffer
- USB fixes, and use of FIQ instead of plain IRQ
- generic ARM fixes for memset
- BT l2cap fix
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for:
- sound volume
- GL deadlock
- ressources leak
- compressed audio streams
- audio sampling up to 192kHz
- display scaling
- cache flush for mailbox
Switch to using a 7-char cset, instead of the long one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by 'scanf' on IRC, the iptables now fails to build because
of a missing <asm/cache.h> header in the kernel headers. The package
directly uses $(LINUX_HEADERS_DIR), which is not correct: this is the
source directory of the kernel, not where they are installed, and in
addition, this directory is empty/does not exist when using external
toolchains.
Instead, we use $(STAGING_DIR)/usr, which contains the kernel headers,
as part of the toolchain headers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linuxdevices.com has been dead for some time now when it was bought out.
Switch to linuxgizmos.com which is the new page of the author.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason, a '+' sign was left at the beginning of a line in
eglibc.mk. Noticed by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The headers and kernels where changed to XZ format on commit
98b5cc3eb4, but the headers reverted back
to bz2 on the packaging of the toolchain.
This causes double kernel downloads when the versions match, so switch
back the headers to XZ.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lttng-tools doesn't require bison or flex, it contains pre-generated
versions of the lexer and parser, so it can build perfectly fine
without bison and flex. We have removed both of these tools from our
mandatory dependencies since a bit of time, the Free Electrons
autobuilders don't have them installed, and the build succeeds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using the newly introduced 'eglibc' package, this commit enables the
option of building a toolchain using the eglibc C library in the
Buildroot toolchain backend.
In details, this commit:
* Creates a choice to select uClibc or eglibc in the Buildroot
toolchain backend (in toolchain/toolchain-buildroot/Config.in), and
removes the fact that the Buildroot toolchain backend forcefully
enables uClibc (toolchain/Config.in).
* Creates a BUILDROOT_LIBC variables, which points to the package
implementing the C library (i.e either 'uclibc' or 'eglibc').
* Modifies the gcc-final and gcc-intermediate makefiles to use the
BUILDROOT_LIBC variable instead of hardcoding the use of uclibc.
* Ensures that TLS support is always enabled when building eglibc.
[Peter: fix commit text to refer to BUILDROOT_LIBC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a target 'eglibc' package. For now, there is no way
to build this package, the next commit will add the integration of
eglibc into the Buildroot toolchain backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the introduction of the eglibc library to the
internal toolchain backend, the options that allow to enable/disable C
library features such as largefile, IPv6, RPC and so on now belong to
the uClibc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of using the 'uclibc' target for all toolchain backends,
introduce more sensible target names for the external toolchain and
Crosstool-NG toolchain backend make targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(O)/toolchain directory, also called $(TOOLCHAIN_DIR) is no
longer needed, as all packages are now built in $(O)/build/, including
gcc and uClibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several sub-directories of the gcc code base are in fact not needed
for the Buildroot build: libjava/, libgo/ and gcc/testsuite/ being the
biggest ones. Avoiding their extraction saves quite a bit of disk
space, and compensates a bit the fact that we now extract three times
the gcc source code.
This requires changing the 100-uclibc-conf.patch to no longer patch
files from the libjava/ directory, since this directory is no longer
extracted.
[Peter: add comment about why this is done]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libfloat package was removed in
accbd71154, and therefore since this
commit, the LIBFLOAT_TARGET variable is always empty. We get rid of
the stale references to this variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The GCC_STRIP_HOST_BINARIES variable was always defined to 'nope',
which means that the host binaries were never stripped. Get rid of the
corresponding code, which is not in use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to convert gcc to the package infrastructure, we need a way
of overriding the name of the make target used for the installation of
host packages, just like we have for target packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The kernel headers are part of the staging directory, so there is no
reason to point the Busybox CFLAGS directly to them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KERNEL_SOURCE configuration option no longer exists in uClibc, so
there's no point in setting it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libtpl has moved from sourceforge to github, and there is no longer
a version-specific tarball available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new jimtcl package - a lightweight tclsh alternative.
Useful for a lighter footprint usb_modeswitch installation.
tclsh size is ~700kB for ARM compared to ~200kB for jimtcl.
[Peter: wrap help text, fix file header]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libsvg provides a library for parsing SVG content in files or buffers.
Libsvg does not do any rendering, but instead provides a function-based
interface that can be used by various rendering engines.
[Peter: drop libxml2 conditional]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove lttng-tools-no-sync-file-range-in-uclibc.patch because it got
merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Show the user how old the legacy options are, as a
subtle suggestion for him to update mopre often. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 0.8.0 version is at /projects/haserl/haserl/0.8.0, and 0.9.x versions
at /projects/haserl/haserl-devel/.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 2013c and switch to the FTP site since the HTTP one is
unfortunately serving .tar.gz files that are just plain tar files
(uncompressed).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you use a custom target skeleton with no /var/lib directory,
then the symlink installation in dbus.mk will fail. This patch
fixes this issue by creating /var/lib before creating a symlink
there.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the python2 patches were left behind when doing the python3
package. This was because the python build system can now autodetect
what packages can be built in the system.
However, some of these patches are actually useful to reduce drastically
the size of the interpreter.
This patch ports the relevant patches to the python3 package, and adds a
new patch to remove the idle3 IDE as well from the interpreter.
Fixes#5696
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ijs-config (ghostscript) is looked up in /usr/bin, if you've got a host
that has ghostscript with development headers installed then the build
fails when trying to link to the host libijs.
Forcibly disable ghostscript support since we lack a package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The DIRECTFB_CONF_OPT variable was missspelled for disabling the X11
support.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default uClibc configurations strip the resulting binaries/libraries
and don't add debug symbols which is a problem when wanting to debug
issues.
Bind the buildroot BR2_STRIP_* option to uClibc .config DO_STRIP and
BR2_ENABLE_DEBUG to uClibc DO_DEBUG.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libdvbsi++ is a C++ library for parsing DVB SI sections and providing
the output in C++ objects. It's usefull in any case you need prepared
and preselected DVB SI data from the raw stream.
[Peter: fix _LICENSE_FILES tag]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default USERCOMPILE variable uses -fPIE so we bring this back.
This also fixes linking problems for MIPS when non-PIC objects
are used to form a PIC one.
Fixes the following linking problem on MIPS:
connections.o: relocation R_MIPS_HI16 against `__gnu_local_gp'
can not be used when making a shared object; recompile with -fPIC
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes in GPIOs, I2C and DMA.
And since the RPi git tree fork has a non-upstream driver
for rtl8192c WiFi USB stick, there's a fix for that, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch dropped since the polarssl external library option is now
upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correcting the indentation inside Config.in. Also adding the missed
license information.
Note: libmicrohttpd is partialy dual licensed, if you don't need or want
to use the HTTPS option you can choose between LPGLv2.1+ and the eCos
license (http://ecos.sourceware.org/license-overview.html).
If you use the HTTPS option you have to agree to the LGPLv2.1+!
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit bumps the various LTTng components to their latest stable
version: 0.7.7 for liburcu, 1.1.1 for babeltrace, 2.1.3 for libust and
2.1.2 for lttng-modules.
For babeltrace, the patch
lttng-babeltrace-02-fix-build-old-compilers.patch has been removed
because it has been merged upstream as of version 1.1.1. This is also
the reason why the package no longer needs to be autoreconfigured.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upon logging, dropbear whines if /root is group- or others-writable, and
key-based authentication is attempted, reverting to password-based
authentication:
dropbear[149]: /root must be owned by user or root, and not writable by others
dropbear[149]: Password auth succeeded for 'root' from 192.168.127.35:41566
On my system, /root was 770. Changing to 700 fixed the issue.
Having /root 700 is a good idea, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gvfs can make optional use of libgcrypt so it needs to depend on
it if it is selected. It's also necessary to set the
ac_cv_path_LIBGCRYPT_CONFIG variable to a known value in order
to prevent the AM_PATH_LIBGCRYPT macro from searching the host
paths for the libgcrypt-config script.
Fixes the following build problem when libgcrypt is installed on the
host system but the package is not selected in buildroot:
gvfsbackendafpbrowse.c:31:20: fatal error: gcrypt.h: No such file or directory
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If docbook2pdf is present on the host, the documentation is built, no
matter all the --disable-doc*
But forcing ac_cv_prog_DOCBOOK2PDF to no tells configure that
docbook2pdf is absent, and thus the documentation is not built.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gst-omx enables OpenMAX based accelerated video decode.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the gstreamer version 1.x series to buildroot.
[Peter: strip trailing newlines in Config.in]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argp bundled dependency which is linked to the libwvutils.so
shared library, wasn't built with -fPIC.
MIPS will refuce to link a non-PIC library with a shared one.
We fix this problem by appending -fPIC to CFLAGS and build all the
shared objects with -fPIC.
[Peter: use +=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lxp.doc is a module that provides useful features for working with XML
formats in LOM format as used by the LuaExpat project from Kepler.
[Peter: use fixed git revision, github tarball, install -D]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libqmi is a glib-based library for talking to WWAN modems and devices which
speak the Qualcomm MSM Interface (QMI) protocol.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The blkid binary is not any longer installed when libblkid from
util-linux is selected. udev has a builtin blkid command though
and already detects all values that we are interested in. Change
the usbmount script to use the environment variables set by udev
instead of calling blkid directly.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since version 0.3.0, libconfig has been made optional
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already provide BR2_TARGET_GENERIC_HOSTNAME to set /etc/hostname,
so a default /etc/hostname file isn't needed.
More importantly, if the user has explictly set BR2_TARGET_GENERIC_HOSTNAME
to the empty string, we would still end up with a /etc/hostname containing
'buildroot' which is unlikely to be what the user wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A patch from Thomas Petazzoni has been upstreamed in sconeserver; bump version
and remove the patch from Buildroot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Dhcpcd is an RFC2131 compliant DHCP client.
[Peter: needs ipv6, fix whitespace/file header]
Signed-off-by: John Stile <john@stilen.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package adds base64 encode/decode functionality for Lua
[Peter: fix file header, use TARGET_CONFIGURE_OPTS, drop quotes around paths]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: move to libraries, fix Config.in, install into STAGING_DIR]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixup iozone's build system to make it somewhat more flexible.
First make our own linux targets for non-AIO toolchains (uClibc) and
non-threading.
And second, just ditch forced largefile support and expect it from
CFLAGS.
Otherwise using the generic target caused issues like:
http://autobuild.buildroot.net/results/19f606f2978dc3c8039b1bccfcc562b4050083c7/
...which is fixed by this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also added:
- WEBP file format support
- License information
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch-makefile.patch' because it was merged upstream.
This package contains a dispatcher (wrapper) that can be installed as Tcl
script or as binary without further dependency. If Tcl is selected and the
binary interpreter is installed (BR2_PACKAGE_TCL &&
!BR2_PACKAGE_TCL_SHLIB_ONLY) the dispatcher will be installed as Tcl script
otherwise as binary.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch_data-fix-parallel-install.patch' because it was merged
upstream.
Remove dependency on Tcl because the dispatcher script has been moved to
usb_modeswitch package.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And select/install jquery-ui since it's almost mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For certain situations, users may want to install shared FLAT
libraries to the target filesystem even if FDPIC is used as the
primary binary format, or symmetrically users may want to install FDPIC
libraries to the target filesystem even if shared FLAT is used as the
primary binary format.
This commit allows that by:
* Offering additional Kconfig options to install shared FLAT or FDPIC
libraries even when those libraries are not selected as the primary
binary format.
* Preserving all Blackfin toolchain folders under the
TOOLCHAIN_EXTERNAL_DIR, instead of keeping only the one related to
the selected binary format.
* Adding some additional install targets that do the installation of
either the shared FLAT or FDPIC libraries when requested.
[Thomas: refactored code, adjusted commit log]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper was built with a gcc that uses hash-style 'gnu' by
default, the resulting binary might be unusable on other systems. The error
in this case is "Floating point exception".
Using hash-style 'both' solves this issue.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of a long list of the ARMv7-A Cortex-A, use a conditional
based on BR2_GCC_TARGET_ARCH to hide/show toolchains that are only
usable on ARMv7-A.
However, in the comment related to Linaro toolchains, we keep
mentioning Cortex-A{5,8,9,15} because that's what users see when they
select their architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We add support for Linaro 2013.04 and Linaro 2013.05 and remove
support for Linaro 2013.01 and Linaro 2013.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'strace-fix-arm-bad-syscall.patch'. This patch had been integrated
in v4.6 (commit: 9bc6340d2) and was later replaced with a generic solution
in v.7 (commit: 2ce12ed31c2).
Strace still cannot handle non-LFS environments, so a modified version of
strace-fix-disabled-largefile-syscalls.patch remains. The 64-bit syscalls
(sys_truncate64, etc.) are references in the sysent structure but the
functinon definitions are commented out becuase of the missing LFS support.
The workaround for the 'forced lfs mode' doesn't seem to be necessary anymore.
Build tested on arm w and w/o LFS support.
[Peter: arc still not supported]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pass --disable-strict to avoid having -Werror in CFLAGS.
Having -Werror in CFLAGS can lead to build problems depending
on the gcc version that is being used and it should not be used
in released code.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream changed their distribution tarball site.
Thanks go to Andrew Scheller from bug #6308 for noticing and reporting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot uses a normal ARM compiler to build the AM33X CM3 firmware
(which runs on a Cortex-M3 processor), but Buildroot will have a
default -march value that doesn't necessarily match the one needed for
Cortex-M3, leading to build failures (gcc complains that the
-mcpu=cortex-m3 option being passed is not compatible with the
selected -march).
Fix this by explicitly indicating -march=armv7-m.
Fixes:
http://autobuild.buildroot.net/results/db1/db13623b1701bfe678c302e8f88c7473cb2345f9/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove bison-2.6-compat patch as it has been incorporated upstream.
Remove fix build issue with old gtk as gtk has been bumped to a newer
version.
Remove fix-build-with-gcc-4-6 as it has incorporated upstream.
Remove directfb patches due to depreciation
Remove pool patch as it is no longer required
Remove pthread_getattr_np as webkit no longer uses this function.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Drop DirectFB support from libgtk2
* bump libgtk2 to version 2.24.18
[Peter: fixup patch whitespace changes]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch bumps libglib2 to version 2.36.1. In addition this bumps glibmm
and glib-networking to 2.36.1.
Signed-off-by: Spenser Gilliland <spenser at gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And mark 3.8.x series as deprecated to match upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Updating brings in a new bootloader that enables more free codecs:
MJPEG, VP6, VP8, Ogg Theora and Ogg Vorbis
Also, the command-line definition has moved to its own file, now.
Although the legacy 'cmdline' variable seems to still be supported
for a little while, better switch now than forget when we upgrade
later.
Update the RPi board readme accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When BR2_PACKAGE_ARGP_STANDALONE is enabled and built before p11-kit the
configure script detects it and a conflict arises because libc already
includes and defines program_invocation_short_name.
Avoid this by forcing the detection to true otherwise the configure
script tries to use argp-standalone and it clashes with libc. Fixes:
http://autobuild.buildroot.net/results/a39/a39fe81a356b922a891d4225a56ce2427ab5bca7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
bwm-ng is a networking application, not a system one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages (kmod, e2fsprogs, ..) contain multiple (different) license
files with the same file name, but in different directories.
These are currently all copied to the same filename in
output/legal-info/licenses/<pkg>, overwriting everything but the last file.
Fix it by recreating the same directory structure under legal-info.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libkmod is licensed as LGPL, while the kmod tools are GPL.
We always install libkmod, but conditionally install the tools.
This patch adjusts the license variables accordingly.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
genext2fs is built only if the user selected an ext2 root filesystem.
However, some use-cases can't live with the full target/ dir on the
root filesystem, and requires separate partitions (eg. for /usr).
In this case, the user would not select an ext2 root fs in the
Buildrooot menu, and would only generate a tarball of the rootfs.
This tarball would then be used from a post-image script to build
the actual required FSes.
But then, genext2fs is not built, since the ext2 root FS was not
selected.
As for the other filesystem generators, provide a host variant of
genext2fs (genext2fs is already host-package aware, so only needs
adding a Kconfig entry).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump version to get a few new firmware files for some WiFi adapters.
In the rtl81xx familly, it's hard to differentiate each members: I have
a USB stick that identifies itself as TRL8188CUS, but is handled by the
rtl8192ce driver. So I moved all of rtl81xx firmwares under the same
option to avoid confusion.
It will be the responsibility of the user to eventually get rid of
unwanted firmware files in a post-build script, if needed.
Ditto for rtl87xx.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a buncha fixes that are not available in a release yet.
Needs refreshing our patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following patch adds support for ecryptfs-utils.
http://ecryptfs.org/
[Peter: needs host-intltool, fix typo in help text]
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper or any symbolic link to it was resolved by PATH,
the wrapper takes the working directory to calculate the relative paths.
Now '/proc/self/exe' is used to resolve the absolute path to the toolchain
directory if the wrapper was called neither with a relative nor an absolute
path.
[Peter: fix off-by-one, swap value == var checks around]
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added support for mysql and sqlite plugins. Configuration is based on qt package.
[Peter: strip trailing spaces]
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This forces bmake to call the wrapper, not itself.
Also, use consistent "${0/*}" instead of "${0/pmake}".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When qt5 is built with EGLFS support, libQt5OpenGL library should be copied to
target.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).
In the case of gutenprint, the patch hook executed for the target just
creates one directory which is needed for autoreconf to work, and the
host variant is not autoreconf'ed. So there is no harm in also
applying this patch hook to the host variant.
[Peter: autoreconf for host as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).
In the case of the xlib_libX11 package, the post-patch hook removes
some flags from the build of the makekeys utility, so that when
xlib_libX11 is built for the target, the build of makekeys for the
host works properly. This modification can be applied to the host
variant of xlib_libX11 without any problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There used to be a post-patch hook to apply a patch only on the host
variant of libgtk2. However, after the reorganization of the patch
naming policy, this was no longer working properly, so
dd1848bc73 changed this by a patch that
works on both the target and host variants.
We can therefore get rid of the useless post-patch hook.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the gettext source code was being patched differently for
the host and the target build, which is going to be incompatible with
out-of-tree build. The difference is that the gettext tools could be
disabled in the target build, but are always enabled on the host
build.
Therefore, this commit switches the gettext package to using proper
patches against the relevant configure.ac and Makefile.am
files. gettext is now being autoreconfigured. Configuration options
are also passed for the host variant, in order to disable the build of
a large number of things we don't care about.
Finally, the two existing patches are renamed to include a number in
their filename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
this adds the libopenmax virtual package for hardware based video acceleration
[Peter: fix openmax-without-any-backends check]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, /home/default is mode 2755 which means it is setgid.
Since /home/default is not group-writable, it is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
I believe the original intent was to make it that the configure step
for the opengl virtual packages fails if there is not at least one
dependency. This patch fixes the logic so that it actually fails if
dependency list is empty
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following compilation problem when building with 'make -s'
Unknown option "-q".
See ./configure --help for available options.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bug caused udev to fail to load any module, crashing with Illegal
instruction.
The patch was taken from upstream and should be integrated in the next
version of kmod (version 14)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc fails to build with the Blackfin external toolchains provided
by Analog Devices, because their uClibc configuration doesn't include
AI_ADDRCONFIG. In order to prevent such build failures to happen, we
simply prevent libtirpc from being selected when such toolchains are
used. This is not a big problem, since they provide native RPC
support.
Also, since they provide native RPC, we don't have to propagate this
new dependency to the reverse dependencies of libtirpc, because they
all use native RPC when available. The exception to this rule is the
rpcbind package, which can only use the libtirpc implementation of
RPCs, and not the native one of C libraries. Therefore, the dependency
is propagated to the rpcbind package.
Fixes:
http://autobuild.buildroot.org/results/58b/58b16449065c16afce11ba120db56839efb2b1ea/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we do for many other GNOME-hosted tarballs, use a
<pkg>_VERSION_MAJOR variable for network-manager.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a new package for the OpenGL, OpenVG and EGL
proprietary implementations specific to the Vivante GPU of i.MX6
processors.
[Peter: show comment on uClibc toolchains, tweak help text]
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit moves the firmware-imx package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit moves the imx-lib package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The freescale-imx directory is intended to contain all freescale
i.MXyy related packages, together with their download site and version
info
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The at91bootstrap build sometimes fail when doing parallel builds.
Build it without parallel build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turned out that setting a nil-UUID is no better than clearing it.
What currently happens is as follows:
- first, genext2fs does not generate a UUID
- then we tune2fs to upgrade the filesystem
- then we run fsck, which generates a random UUID
- then we re-run tune2fs to set a nil-UUID
So, on the target, if the file system is improperly unmounted (eg.
with a power failure), on next boot, fsck may be run, and a new
random UUID will be generated.
*However*, fsck improperly updates the filesystem when it adds the
UUID, and there are a few group descriptor checksum errors.
Those errors will go undetected until the next fsck, which will then
block for user input (bad on embedded systems, bad).
Fix that by systematically generating a random UUID _before_ we call
to fsck.
A random UUID is not so bad, after all, since there are already so
many sources of unpredictability in the filesystem: files date and
ordering, files content (date, paths...) which renders a fixed UUID
unneeded.
And it is still possible to set the UUID in a post-image script if
needed, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of doing some nasty SED tricks, use a patch that modifies the
bzip2 build system to make it a little bit nicer. Those SEDs were made
differently for the host and target packages, which is contrary to the
logic of not having any difference in the source tree between the host
build and the target build.
This commit also makes sure that bzip2.mk behaves properly in a
BR2_PREFER_STATIC_LIB=y context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The attr-0001-attr-Fix-static-build-installation.patch has been integrated
in the new upstream version.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since fe6a9e5e9d (flex: needs M4 at runtime), the autobuilders have
been producing a number of flex related build failures. They have been
hard to track down, because even on the same machine, with the same
Git commit ID and the same configuration, the failure could not be
reproduced.
However, a close inspection of flex's config.log file allowed to find
out what the problem was. In its configure script, flex uses the
host-flex to generate a minimal example, and find out the name of the
output file of flex.
When the M4 environment is passed when building the target flex, it
also affects the *execution* of the host-flex, which tries to use
/usr/bin/m4 (which doesn't exist in the autobuilder machines) instead
of the one built in $(HOST_DIR)/usr/bin/m4. So generating the minimal
example fails. And this is where what I could reproduce and what the
autobuilders script produce differ: in my case, even though host-flex
fails to run, it creates an empty lex.yy.c, which is enough to make
the configure script happy. In the context of the autobuild scripts,
this file is apparently not created at all, for an unknown reason, and
this leads to the configure script to abort.
The fix is to set ac_cv_path_M4. This will affect the default m4 used
by the target flex, but it will not affect the m4 used by the
host-flex. It allows the test made during the configure script to work
properly, and therefore should fix the issue seen in the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
"tune2fs -U clear" creates an invalid filesystem, that fsck.ext2
whines about later:
$ make rootfs-ext2
[--SNIP--]
$ ./host/usr/sbin/fsck.ext4 images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
Filesystem did not have a UUID; generating one.
images/rootfs.ext2: clean, 4616/5120 files, 53171/131072 blocks
$ ./host/usr/sbin/fsck.ext4 -f images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
One or more block group descriptor checksums are invalid. Fix<y>? yes
Group descriptor 0 checksum is 0x4131, should be 0x8bdb. FIXED.
[--SNIP--]
So we set an explicitly NULL UUID instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For proper runtime execution, flex requires m4 to be
installed. Passing a M4 variable at configure time is needed,
otherwise flex on the target will try to use a 'm4' binary with a
build machine path.
Fixes bug #4988.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ADI officially supports the buildroot and related GNU toolchain for
Blackfin since ADI's 2012R1 release only. In order to avoid confusion,
it is better to remove the 2011R1 GNU toolchain for Blackfin. In
addition, the 2011R1 GNU toolchain for Blackfin doesn't support the
BF60x processors.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When thread support is disabled, the libitm and libatomic libraries
from gcc should be disabled, otherwise, the build of gcc fails.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For a reason that's fairly unclear to me, Peter added a '-lz' link
flag to the elf2flt.mk build in d5664ee99 ("elf2flt: fix link").
However, the zlib library may not necessarily be installed on the host
machine, so we should depend on host-zlib, and pass the appropriate
LDFLAGS. This is what this patch does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enclose all dropbear sub-options into a 'if BR2_PACKAGE_DROPBEAR'
... 'endif' block rather than having 'depends on BR2_PACKAGE_DROPBEAR'
for each option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Thomas: updated to 2.0.8, restricted to supported architectures,
added licensing informations, updated to latest Buildroot package
infrastructure]
[Peter: Fix LICENSE_FILES typo, needs largefile support in toolchain]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.
Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.
While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.
[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A couple of patches make use of XXX_POST_UNINSTALL_TARGET_HOOKS, which
is not a hook set that Buildroot actually supports.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes the build on AArch64 (and potentially others).
The patch has been submitted upstream.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit d66cd067f3.
SSL certificates are no always installed in /etc/ssl/certs. For example, on
CentOS 5.6 the default OpenSSL certificates directory is /etc/pki/tls/certs,
and wget can download using https without any problem.
Moreover, the existence of /etc/ssl/certs does not guarantee the presence of a
CA certificates bundle even on Debian. On my current Debian testing
installation the openssl package itself creates an empty /etc/ssl/certs
directory.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes a build failure on AArch64 (and potentially others).
Make sure sys/select.h is included before using select(2).
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Missing defines for:
aarch64, arc, blackfin, microblaze & xtensa.
Not properly supported: mips - only defines generic mips as BE, doesn't
know about mipsel (LE) thus assuming it's BE.
Fixes:
http://autobuild.buildroot.net/results/9847702b046bed59b07f0e075a58b1f31e9236ce/
This should be pretty straightforward to fix in
Foundation/include/Poco/Platform.h for interested parties since it only
cares about endianness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The boost context library needs porting to each new architecture
and only a limited number of ports are currently available.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Source code has workaround for missing {get,make,swap}context on ARM,
so mongrel2 doesn't need glibc/uclibc snapshot when built for ARM.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise, graph-depends tries to call 'make target-purgelocales-show-depends',
which does not exist, as 'target-purgelocales' is not an actual package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the FW needed for the Cortex M3 on the beaglebone. This is required
for working power management.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this firmware, the beaglebone won't be able to suspend/resume
correctly.
[Peter: tweak Config.in, rename init script, wrap long lines]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.
We're also setting the kernel headers to follow the 3.8 series.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already remove python2.7-config and the symbolic link
python-config, but we forgot to remove the python2-config symbolic
link.
Note that we can't use the <pkg>_CONFIG_SCRIPTS mechanism here because
python2.7-config is written in... Python, and doesn't follow the usual
syntax of <pkg>-config scripts. It takes the paths directly from
distutils.sysconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ptpd2 package, handles the IEEE 1588-2008 spec which is not
backward compatible to IEEE 1588-2002.
[Peter: mark init script as executable]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the new ptpd package, loosely based on the one from bug #2305.
This one handles the IEEE 1588-2002 spec.
[Peter: mark init script as executable]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
2013-05-11 22:23:58 +02:00
3847 changed files with 107101 additions and 67912 deletions
bootcmd=mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
bootdelay=3
bootscript=echo Running bootscript from mmc ...; source
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${uimage}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootm ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootm; else echo WARN: Cannot load the DT; fi; fi; else bootm; fi;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
