Fixes the following security issue:
- CVE-2021-3181: rfc822.c in Mutt through 2.0.4 allows remote attackers to
cause a denial of service (mailbox unavailability) by sending email
messages with sequences of semicolon characters in RFC822 address fields
(aka terminators of empty groups). A small email message from the
attacker can cause large memory consumption, and the victim may then be
unable to see email messages from other persons.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c1413cd94c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host build of uboot-tools can occur early in the build process and may
require the creation of BINARIES_DIR before generation of an enabled envimage
and/or boot script binary. So to resolve this in proper way, separated the
build and installation part of uboot env/script in their respective commands.
Signed-off-by: Kalpesh Panchal <kalpesh.panchal@rockwellcollins.com>
Signed-off-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d8db91fc6f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4fea71ac78 (package/sudo: security bump to version 1.9.5p2)
removed the patch, but forgot to remove the now unneeded autoreconf. Fix
that.
Reported-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 84a8aac451)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Major changes between sudo 1.9.5p2 and 1.9.5p1
* Buildroot: dropped a patch that was included in the release.
* Fixed sudo's setprogname(3) emulation on systems that don't
provide it.
* Fixed a problem with the sudoers log server client where a partial
write to the server could result the sudo process consuming large
amounts of CPU time due to a cycle in the buffer queue. Bug #954.
* Added a missing dependency on libsudo_util in libsudo_eventlog.
Fixes a link error when building sudo statically.
* The user's KRB5CCNAME environment variable is now preserved when
performing PAM authentication. This fixes GSSAPI authentication
when the user has a non-default ccache.
* When invoked as sudoedit, the same set of command line options
are now accepted as for "sudo -e". The -H and -P options are
now rejected for sudoedit and "sudo -e" which matches the sudo
1.7 behavior. This is part of the fix for CVE-2021-3156.
* Fixed a potential buffer overflow when unescaping backslashes
in the command's arguments. Normally, sudo escapes special
characters when running a command via a shell (sudo -s or sudo
-i). However, it was also possible to run sudoedit with the -s
or -i flags in which case no escaping had actually been done,
making a buffer overflow possible. This fixes CVE-2021-3156.
https://www.sudo.ws/stable.html#1.9.5p2
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4fea71ac78)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
opentracing-cpp fails to build if clang-tidy is installed:
...
-- clang-tidy found: /usr/lib/llvm/11/bin/clang-tidy
-- Configuring done
-- Generating done
...
[ 25%] Building CXX object CMakeFiles/opentracing.dir/src/propagation.cpp.o
.../buildroot/output/build/opentracing-cpp-1.5.1/include/opentracing/string_view.h:5:10: error: 'algorithm' file not found [clang-diagnostic-error]
^
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:3:11: warning: '__llvm_libc' needs to be the outermost namespace [llvmlibc-implementation-in-namespace]
namespace opentracing {
^
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:11:3: warning: use '= default' to define a trivial default constructor [hicpp-use-equals-default,modernize-use-equals-default]
PropagationErrorCategory() {}
^ ~~
= default;
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:13:15: warning: use a trailing return type for this function [modernize-use-trailing-return-type]
const char* name() const noexcept override {
~~~~~~~~~~~ ^
auto -> const char*
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:13:15: warning: method 'name' can be made static [readability-convert-member-functions-to-static]
const char* name() const noexcept override {
^ ~~~~~~
static
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:17:24: warning: use a trailing return type for this function [modernize-use-trailing-return-type]
std::error_condition default_error_condition(int code) const
^
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:37:15: warning: use a trailing return type for this function [modernize-use-trailing-return-type]
std::string message(int code) const override {
^
.../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp:58:28: warning: use a trailing return type for this function [modernize-use-trailing-return-type]
const std::error_category& propagation_error_category() {
^
226 warnings and 1 error generated.
Error while processing .../buildroot/output/build/opentracing-cpp-1.5.1/src/propagation.cpp.
Suppressed 218 warnings (218 in non-user code).
Use -header-filter=.* to display errors from all non-system headers. Use -system-headers to display errors from system headers as well.
Found compiler error(s).
make[3]: *** [CMakeFiles/opentracing.dir/build.make:83: CMakeFiles/opentracing.dir/src/propagation.cpp.o] Error 1
make[3]: *** Waiting for unfinished jobs....
.../buildroot/output/build/opentracing-cpp-1.5.1/include/opentracing/string_view.h:5:10: error: 'algorithm' file not found [clang-diagnostic-error]
^
.../buildroot/output/build/opentracing-cpp-1.5.1/src/dynamic_load.cpp:4:
Disable the 'ENABLE_LINTING' option to avoid this influence.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit aede6dd7b6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop libupnp18 as libupnp has been bumped to 1.14.x and 1.8.x will not
been fixed against CallStranger a.k.a. CVE-2020-12695
mpd and vlc are already compliant with libupnp 1.14.x (i.e those
packages use UpnpInit2 instead of the deprecated UpnpInit)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit eddc9df972)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Move site to Orange-OpenSource
- Drop patch (already in version)
- This version is compatible with libupnp 1.14.x to fix
CallStranger a.k.a. CVE-2020-12695
- Add threadutil license (BSD-3-Clause)
- Update hash in license file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a83073ac31)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- This version is compatible with libupnp 1.14.x which fix
CallStranger a.k.a. CVE-2020-12695
- Drop all patches (already in version)
- expat is not needed since version 1.5.0 and
a4f0cccd6a
- fmt is a mandatory dependency since version 1.5.0 and
fe81e5fc88
- spdlog is a mandatory dependency since version 1.5.0 and
615d698fe4
- pugixml is a mandatory dependency since version 1.5.0 and
c244006aa0
- libnpupnp can be used instead of libupnp since version 1.6.2 and
e648763626
- Set CXX_FILESYSTEM_NO_LINK_NEEDED to ON to avoid a build failure
due to check_cxx_source_runs which has been added with
8ea0fce24c
- Update indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr:
- libupnp and libnpupnp are mutually exclusive
- fix typo in npupnp package name
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 61b1107e30)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CallStranger a.k.a. CVE-2020-12695 as well as CVE-2020-13848
- Update indentation in hash file (two spaces)
- Backport all changes from libupnp18 to libupnp:
- Use COPYING instead of LICENSE (no license change)
- Add host-pkgconf dependency
- Add --enable-reuseaddr
- Add openssl optional dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 118648d161)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2020-36221: An integer underflow was discovered in OpenLDAP before
2.4.57 leading to slapd crashes in the Certificate Exact Assertion
processing, resulting in denial of service (schema_init.c
serialNumberAndIssuerCheck).
- CVE-2020-36222: A flaw was discovered in OpenLDAP before 2.4.57 leading to
an assertion failure in slapd in the saslAuthzTo validation, resulting in
denial of service.
- CVE-2020-36223: A flaw was discovered in OpenLDAP before 2.4.57 leading to
a slapd crash in the Values Return Filter control handling, resulting in
denial of service (double free and out-of-bounds read).
- CVE-2020-36224: A flaw was discovered in OpenLDAP before 2.4.57 leading to
an invalid pointer free and slapd crash in the saslAuthzTo processing,
resulting in denial of service.
- CVE-2020-36225: A flaw was discovered in OpenLDAP before 2.4.57 leading to
a double free and slapd crash in the saslAuthzTo processing, resulting in
denial of service.
- CVE-2020-36226: A flaw was discovered in OpenLDAP before 2.4.57 leading to
a memch->bv_len miscalculation and slapd crash in the saslAuthzTo
processing, resulting in denial of service.
- CVE-2020-36227: A flaw was discovered in OpenLDAP before 2.4.57 leading to
an infinite loop in slapd with the cancel_extop Cancel operation,
resulting in denial of service.
- CVE-2020-36228: An integer underflow was discovered in OpenLDAP before
2.4.57 leading to a slapd crash in the Certificate List Exact Assertion
processing, resulting in denial of service.
- CVE-2020-36229: A flaw was discovered in ldap_X509dn2bv in OpenLDAP before
2.4.57 leading to a slapd crash in the X.509 DN parsing in ad_keystring,
resulting in denial of service.
- CVE-2020-36230: A flaw was discovered in OpenLDAP before 2.4.57 leading in
an assertion failure in slapd in the X.509 DN parsing in decode.c
ber_next_element, resulting in denial of service.
https://www.openldap.org/software/release/changes.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 46c4c9684d)
[Peter: mark as security bump, add CVE info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some external packages call pg_config to determine the installed
PostgreSQL options. Add this output to Buildroots own pg_config,
so these packages correctly compile.
Added options:
--pkgincludedir
--pgxs
--cflags
--cc
--pkglibdir
--bindir
--sharedir
--localedir
--docdir
--mandir
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e3ff618bd8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
See also commit 4ff6e52392 which describes the
problem in detail.
The same problem now arises again, because syslog-ng renamed the
--enable-snmp-dest option into --enable-afsnmp. See syslog-ng commit
4537938474771673ef5bd4a9cad7c9a7dc20b7c1, first part of 3.27.1.
Update the configure options passed from Buildroot accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40f4468e94)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 40bb37bd70 refactored get-developers, and now the 'os' module is
no longer needed, but still imported:
utils/get-developers:6:1: F401 'os' imported but unused
1 F401 'os' imported but unused
Drop it now.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9277978e28)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
boost is an optional dependency which is enabled by default since
version 0.80.0 and
355fd8d58c
There is no cmake option to enable or disable this dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 497f989d75)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
meson will by default try to detect the presence of ccache, and if
found, will use it unconditionally.
However, using a system-wide ccache, which would be using our own cache
directory, may very well conflict with our own ccache.
But there is no option to disable that meson behaviour. The only
workaround that is even the official documented way to do so, is to
actually pass environment variables that point to the compiler:
https://mesonbuild.com/Feature-autodetection.html#ccache
For the host variants, we pass $(HOST_CONFIGURE_OPTS) in the environment,
and this contains correct settings for CC and CXX, so meson does not try
and detect ccache; it uses exactly what we tell it to use.
For the target variant, the settings for the cross-compiler are defined
in the cross-compilation file, and so meson just abides by our will. But
for the compiler-for-build, there is no way to specify the CC_FOR_BUILD
or CXX_FOR_BUILD via a cross-compilation file:
https://mesonbuild.com/Machine-files.htmlhttps://mesonbuild.com/Cross-compilation.html
We could pass the full TARGET_CONFIGURE_OPTS in the environment, like we
do for the host variant, but this contains a lot more variables that are
supposed to be covered by the cross-compilation file.
So, we stay safe and just provide the exact two variables that meson
will use to avoid detecting ccache.
If the current configuration defines the use of ccache, then these two
variables will be properly setup to use our own ccache.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Gleb Mazovetskiy <glex.spb@gmail.com>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Norbert Lange <nolange79@gmail.com>
(cherry picked from commit f4a61d1ae2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported on IRC by sephthir, the qemu_sparc_ss10_defconfig doesn't
work as expected: the system generated when booted under Qemu produces
illegal instruction messages.
gcc 8.3, 9.2 are the latest working gcc version. git bisect between
gcc 8.3 and 8.4 allowed to identify the commit that introcuced the
regression.
Reverting this patch allowed to produce a working rootfs.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/786589934
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4d16e6f532)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit dfcc18f84b cmake-package
_INSTALL_STAGING_OPTS/_INSTALL_TARGET_OPTS use 'install/fast'
instead of 'install', adjust documentation accordingly.
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0c80a0da9a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fixes CVE-2021-23239, a potential information leak in sudoedit that
could be used to test for the existence of directories not normally
accessible to the user in certain circumstances. When creating a new
file, sudoedit checks to make sure the parent directory of the new
file exists before running the editor. However, a race condition
exists if the invoking user can replace (or create) the parent
directory. If a symbolic link is created in place of the parent
directory, sudoedit will run the editor as long as the target of the
link exists. If the target of the link does not exist, an error
message will be displayed. The race condition can be used to test for
the existence of an arbitrary directory. However, it cannot be used to
write to an arbitrary location.
- Fixes CVE-2021-23240, a flaw in the temporary file handling of
sudoedit's SELinux RBAC support. On systems where SELinux is enabled,
a user with sudoedit permissions may be able to set the owner of an
arbitrary file to the user-ID of the target user. On Linux kernels
that support protected symlinks setting
/proc/sys/fs/protected_symlinks to 1 will prevent the bug from being
exploited. For more information, see Symbolic link attack in
SELinux-enabled sudoedit.
- Update license hash:
- copyright of python bindings added with
6c1b155fed
- a few other files (ISC licenced) added with
d4b2db9078
- year updated with
9e111eae57
- Update indentation in hash file (two spaces)
https://www.sudo.ws/stable.html#1.9.5p1
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1b14e99666)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using absolute paths within getdeveloperlib isn't very sensible, it
makes a lot more sense to handle everything as relative paths from the
top-level Buildroot source directory.
parse_developers() is changed to no longer take the base path as
argument: it is automatically calculated based on the location of
utils/getdeveloperlib.py. Then, the rest of the logic is adjusted to
use relative paths, and prepend them with the base "brpath" when
needed.
This commit allows pkg-stats to report correct developers information
even when executed from an out of tree directory.
Before this patch:
$ ~/buildroot/support/scripts/pkg-stats -p ipmitool --json out.json
$ cat out.json | jq '.packages.ipmitool.developers'
[]
$ cat out.json | jq '.defconfigs.stm32f469_disco'
{
"name": "stm32f469_disco",
"path": "configs/stm32f469_disco_defconfig",
"developers": []
}
After this patch:
$ ~/buildroot/support/scripts/pkg-stats -p ipmitool --json out.json
$ cat out.json | jq '.packages.ipmitool.developers'
[
"Floris Bos <bos@je-eigen-domein.nl>",
"Heiko Thiery <heiko.thiery@gmail.com>"
]
$ cat out.json | jq '.defconfigs.stm32f469_disco'
{
"name": "stm32f469_disco",
"path": "configs/stm32f469_disco_defconfig",
"developers": [
"Christophe Priouzeau <christophe.priouzeau@st.com>"
]
}
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 40bb37bd70)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With Python 3.8, the following deprecation warnings are emitted:
/home/thomas/projets/buildroot/./support/scripts/pkg-stats:418: DeprecationWarning: The explicit passing of coroutine objects to asyncio.wait() is deprecated since Python 3.8, and scheduled for removal in Python 3.11.
/home/thomas/projets/buildroot/./support/scripts/pkg-stats:536: DeprecationWarning: The explicit passing of coroutine objects to asyncio.wait() is deprecated since Python 3.8, and scheduled for removal in Python 3.11.
The correct way to pass coroutines is to use asyncio.create_task(),
but this is rather new method (Python 3.7), and using it breaks
compatibility with older Python versions. As suggested at
https://docs.python.org/3/library/asyncio-task.html#asyncio.create_task,
use the more cryptic, but also more compatible asyncio.ensure_future()
method.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ffb2620405)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The cve module needs ijson, which may not be installed. Since cve
matching is only enabled when --nvd-path is passed, it is a bit silly
to error out about ijson being missing if it's not used.
So instead of unconditionally importing the cve module, only do it
conditionally.
However, instead of doing it right at the point where it is used, we
do it at the beginning of the main() function. Indeed, if the cve
module is needed but cannot be imported, we want to error out
immediately rather than doing a whole bunch of things, and failing on
the user later on in the middle of the pkg-stats execution.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 824032d168)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now the bootlin-x86-64-glibc was using a Bootlin toolchain as a
custom external toolchain. However, now that we have the
toolchain-external-bootlin package explicitly supporting Bootlin
toolchains as known toolchain profiles, it makes sense to use
that. Indeed, this will ensure that this autobuilder configuration
will use the latest available version of the Buildroot toolchain for
x86-64 glibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 01533244a5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package has both a target and a host variant, and uses git
submodules, and the host variant is downloaded before the target one, we
end up with the generated archive missing the submodules.
This happens in exactly one package in our tree: c-capnproto.
This issue was not caught before because after a few days, the full
sources are added to sources.buildroot.net. So when the hash check
fails, the full tarball is simply downloaded from there.
Propagate the git submodule setting from the target variant to the host
variant, unless the host variant explicitly opted-out.
Fixes:
http://autobuild.buildroot.org/results/2de9c6c8ce83569d18cc7140ebc60d6fe1aadcbf/
Reported-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4d03923b6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes build error
output/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-amd-linux-gnu/4.9.1/../../../../aarch64-amd-linux-gnu/bin/ld:
cannot find -latomic
using this defconfig
BR2_aarch64=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CODESOURCERY_AARCH64=y
BR2_PACKAGE_OPENSSL=y
libopenssl is only used here as an example: all packages adding -latomic
if BR2_TOOLCHAIN_HAS_LIBATOMIC=y are broken, like dav1d, ffmpeg, gnutls,
kodi and vlc.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a530fd4a42)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The LLVM project has switched to using a monorepo to host all their
components. The separate, individual repositories have been closed
late 2020 / early 2021. The libclc repository is no longer.
Switch to using the libclc source from the llvm legacy and frozen
mirror.
Even though we could switch over to using the github helper, we just
keep using the git download method: it is a small repository, and it
will not impact people that were already using it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Cc: Michael Opdenacker <michael.opdenacker@bootlin.com>
Acked-by: Romain Naour <romain.naour@gmail.com>
(cherry picked from commit 971d1ea7ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following commits:
- 7868289fd5 package/zic: bump version to 2020f
- c99374ecbb package/tzdata: bump version to 2020f
bumped the tzdata from version 2020a to 2020f. However, in 2020b, the
zic option '-y' was removed, and so was the yearistype.sh script [0].
This now spews annoying warnings:
warning: -y ignored
Fortunately, it still consumes its argument, so the missing yearistype.sh
is simply ignored.
Drop that option.
[0] https://mm.icann.org/pipermail/tz-announce/2020-October/000059.html
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
(cherry picked from commit 7f78eef767)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated in README.md, multipath-tools is covered by several licenses
and LGPL-2.0 is "just" the default license:
- GPL-2.0+ (e.g. libmultipath/alias.c)
- GPL-3.0+ (e.g. libdmmp/libdmmp.c)
- LGPL-2.1+ (e.g. libmpathcmd/mpath_cmd.c)
So replace COPYING (which is a symlink to LICENSES/LGPL-2.0) by the
approriate license files in LICENSES directory
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: further split long lines]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fc7b7f73c4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set the new WARNFLAGS to "" which has been added since version 0.8.5 and
82f1b164cb
Otherwise, -Werror will raise the following build failure:
/srv/storage/autobuild/run/instance-3/output-1/host/bin/mipsel-linux-gcc --std=gnu99 -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -O2 -D_FORTIFY_SOURCE=1 -Werror -Wall -Wextra -Wformat=2 -Werror=implicit-int -Werror=implicit-function-declaration -Werror=format-security -Wno-clobbered -Wno-error=clobbered -Werror=cast-qual -Werror=discarded-qualifiers -pipe -DBIN_DIR=\"/sbin\" -DLIB_STRING=\"lib\" -DRUN_DIR=\"run\" -MMD -MP -fPIC -I.. -I../../libmultipath/nvme -Wp,-D_FORTIFY_SOURCE=2 -c -o nvme.o nvme.c
<command-line>: error: "_FORTIFY_SOURCE" redefined [-Werror]
Fixes:
- http://autobuild.buildroot.org/results/71f7661e7d26ca8608e902eee9f2a92376b00601
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fe4b4e9dc3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2020-8265: use-after-free in TLSWrap (High) Affected Node.js versions
are vulnerable to a use-after-free bug in its TLS implementation. When
writing to a TLS enabled socket, node::StreamBase::Write calls
node::TLSWrap::DoWrite with a freshly allocated WriteWrap object as first
argument. If the DoWrite method does not return an error, this object is
passed back to the caller as part of a StreamWriteResult structure. This
may be exploited to corrupt memory leading to a Denial of Service or
potentially other exploits
- CVE-2020-8287: HTTP Request Smuggling in nodejs Affected versions of
Node.js allow two copies of a header field in a http request. For
example, two Transfer-Encoding header fields. In this case Node.js
identifies the first header field and ignores the second. This can lead
to HTTP Request Smuggling
- CVE-2020-1971: OpenSSL - EDIPARTYNAME NULL pointer de-reference (High)
This is a vulnerability in OpenSSL which may be exploited through Node.js.
You can read more about it in
https://www.openssl.org/news/secadv/20201208.txt
Update the license hash for the addition of the (MIT licensed)
cjs-module-lexer module:
9eb1fa1924
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ecc8f0fe84)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-35512: On Unix, avoid a use-after-free if two usernames have the
same numeric uid. In older versions this could lead to a crash (denial of
service) or other undefined behaviour, possibly including incorrect
authorization decisions if <policy group=...> is used. Like Unix
filesystems, D-Bus' model of identity cannot distinguish between users of
different names with the same numeric uid, so this configuration is not
advisable on systems where D-Bus will be used.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c80989aa9d)
[Peter: mention security fix]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit d82da39d55 forgot to move
BR2_PACKAGE_CA_CERTIFICATES condition under BR2_PACKAGE_LIBTASN1 to
avoid the following build failure:
checking if trust module is enabled... configure: WARNING: --with-libtasn1 is needed in order to build the trust module, disabling
no
checking for trust module paths... configure: error: need --enable-trust-module in order to specify trust module paths.
Fixes:
- http://autobuild.buildroot.org/results/e7f68205e1b776f9af34e6017f6eb17f46aa2f19
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0ad12b3a6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2020-27618: An infinite loop has been fixed in the iconv program when
invoked with input containing redundant shift sequences in the IBM1364,
IBM1371, IBM1388, IBM1390, or IBM1399 character sets.
CVE-2020-29562: An assertion failure has been fixed in the iconv function
when invoked with UCS4 input containing an invalid character.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
linux-*/arch/arm/boot/dts/imx6ul.dtsi
requires the install of the sdma-imx6q.bin as stated in
line 727: fsl,sdma-ram-script-name = "imx/sdma/sdma-imx6q.bin";
without the BR2_PACKAGE_FIRMWARE_IMX_SDMA_FW_NAME being set to "imx6q"
line 102 of firmware-imx.mk does not install the firmware to to target
Signed-off-by: Rob Mellor <Rob.Mellor@ultra-pals.com>
Reviewed-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8e00c32b14)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since its introduction in Buildroot in 2013 with commit 07203d78c2
(trace-cmd: new package), trace-cmd has declared installing in staging.
But trace-cmd is a generic-package, and has never, ever provided any
commands for staging installation.
Drop this declaration.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 896b93310a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rpcbind is only used by nfsd to export nfs share supporting older
v2, v3 protocols.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[yann.morin.1998@free.fr:
- move the select to the corresponding symbol
- tweak the commit title
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 95fdf09731)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Release notes:
https://www.python.org/downloads/release/python-391/
Changelog:
https://docs.python.org/release/3.9.1/whatsnew/changelog.html
Fixes the following security issues:
- bpo-42103: Prevented potential DoS attack via CPU and RAM exhaustion when
processing malformed Apple Property List files in binary format.
- bpo-42051: The plistlib module no longer accepts entity declarations in
XML plist files to avoid XML vulnerabilities. This should not affect
users as entity declarations are not used in regular plist files.
- bpo-40791: Add volatile to the accumulator variable in
hmac.compare_digest, making constant-time-defeating optimizations less
likely.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit cde875bf8b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add -p argument that ignore that specified directory already exists.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr:
- split to its own patch
- rewrite commit title
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 9c5ef6018e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add -p argument that ignore that specified directory already exists.
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr:
- split to its own patch
- rewrite commit title
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit d2d629ecd8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
[yann.morin.1998@free.fr:
- use $(INSTALL), not "mkdir -p + cp"
- split to its own patch
- rewrite commit title
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 25bd8ba690)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 2008 pcre is a hard-dependency of php:
aa64c6727c
Instead of optionally depending on the pcre2 package and building the
bundled pcre2 code of php in case BR2_PACKAGE_PCRE2 was not selected
we let php depend on pcre2.
While being at it rename the pcre-related configure option due to
upstream commit:
c1a22f3d4e
Fixes:
http://autobuild.buildroot.net/results/4a5/4a582af6b66c59a61b75a7047d8530202972ebdd/
because the pcre2 package already contains the fix for mips r6.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[yann.morin.1998@free.fr: keep the JIT option]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fabb1243ab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
An 'else' or 'elif' clause inside a make conditional should not be indented
in the same way as the if/endif clause. check-package did not recognize the
else statement and expected an indentation.
For example:
ifdef FOOBAR
interesting
else
more interesting
endif
would, according to check-package, need to become:
ifdef FOOBAR
interesting
else
more interesting
endif
Treat 'else' and 'elif' the same as if-like keywords in the Indent test, but
take into account that 'else' is also valid shell, so we need to correctly
handle line continuation to prevent complaining about the 'else' in:
ifdef FOOBAR
if true; \
... \
else \
... \
fi
endif
We don't add the 'else' and 'elif' statements to start_conditional, because
it would cause incorrect nesting counting in class OverriddenVariable.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a1bb132a81)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 7105e65cd6 ("package/openvpn:
adds target install of systemd unit files") added the installation of
systemd unit files. But in fact, they can be installed by openvpn's
build system. It was simply not working due to the custom install step
implemented in openvpn.mk.
So instead, let's have the autotools-package infra call "make
install", which properly installs everything that's needed for
openvpn, including systemd units, but also plugins, etc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 30bc58d376)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Dependency on threads comes from libllcp itself not from libusb (which
is not even selected)
While at it, also add a comment about this dependency
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b9dc970909)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In barebox v2020.09.0, kconfig has been updated to a newer version
based on Linux 5.9-rc2. As in linux, kconfig can call the compiler
to test its capabilities.
We have no way to know if a custom version would require it or not,
so we just unconditionally depend on the toolchain
Signed-off-by: Jules Maselbas <jmaselbas@kalray.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1c1a629d81)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The upstream git tree has disappeared, but a ZIP file is still hosted
somewhere at NXP. The content of that zip file has been verified to be
100% identical to the tarball we hosted on s.b.o.
As this is a zip file, we can't use the generic extract commands, and
must come up with our own. As such, it no longer makes sense to fix the
CRLF as a post-extract hook; this is moved to the extract command.
Add a hash file while at it.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bd560b6da5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the folloing build failure with protobuf (enabled since commit
31c68a449e) and gcc 5.3.0:
[ 53%] Building CXX object modules/dnn/CMakeFiles/opencv_dnn.dir/opencv-caffe.pb.cc.o
In file included from /home/peko/autobuild/instance-1/output-1/per-package/opencv3/host/opt/ext-toolchain/mips64el-buildroot-linux-uclibc/include/c++/5.5.0/atomic:38:0,
from /home/peko/autobuild/instance-1/output-1/per-package/opencv3/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/google/protobuf/io/coded_stream.h:115,
from /home/peko/autobuild/instance-1/output-1/build/opencv3-3.4.12/buildroot-build/modules/dnn/opencv-caffe.pb.h:23,
from /home/peko/autobuild/instance-1/output-1/build/opencv3-3.4.12/buildroot-build/modules/dnn/opencv-caffe.pb.cc:4:
/home/peko/autobuild/instance-1/output-1/per-package/opencv3/host/opt/ext-toolchain/mips64el-buildroot-linux-uclibc/include/c++/5.5.0/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
#error This file requires compiler and library support \
^
Fixes:
- http://autobuild.buildroot.org/results/7caf175af039054a032b8f63b458b3940d9ec0f3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf96f4e8d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenCV-3's buildsystem will try to detect ccache and use it if
available. This may yield a system-installed ccache.
However, in Buildroot, ccache is entirely hidden away and handled in the
toolchain wrapper.
Forcibly disable detection of ccache.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 505e7f4771)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In buildroot, stripping for the target is configured and implemented
with the global `BR2_STRIP_strip` option that drive the stripping in
the target-finalize step.
So, we explicitly disable stripping at build time for the target
variants.
For the host variants, however, we don't much care about symbols and
stuff, but smaller executables will hopefully load faster than bigger
ones (disputable, given that sections in ELF files are paged-in
on-demand), so we explictly enable stripping.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[yann.morin.1998@free.fr:
- add burb about the target-finalize step
- enable stripping for host variants
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3f39f902b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-25692: A NULL pointer dereference was found in OpenLDAP server
and was fixed in openldap 2.4.55, during a request for renaming RDNs. An
unauthenticated attacker could remotely crash the slapd process by sending
a specially crafted request, causing a Denial of Service.
- CVE-2020-25709: Assertion failure in CSN normalization with invalid input
- CVE-2020-25710: Assertion failure in CSN normalization with invalid input
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Peter: add CVE info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 09a565d940)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Includes security fixes up to XSA-359:
XSA-345: x86: Race condition in Xen mapping code
XSA-346: undue deferral of IOMMU TLB flushes
XSA-347: unsafe AMD IOMMU page table updates
XSA-348: undue recursion in x86 HVM context switch code (CVE-2020-29566)
XSA-351: Information leak via power sidechannel (CVE-2020-28368)
XSA-352: oxenstored: node ownership can be changed by unprivileged clients
(CVE-2020-29486)
XSA-353: oxenstored: permissions not checked on root node (CVE-2020-29479)
XSA-355: stack corruption from XSA-346 change
XSA-356: infinite loop when cleaning up IRQ vectors (CVE-2020-29567)
XSA-358: FIFO event channels control block related ordering (CVE-2020-29570)
XSA-359: FIFO event channels control structure ordering (CVE-2020-29571)
And drop now upstreamed security patches.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c9d27610ab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-8277: Denial of Service through DNS request (High). A Node.js
application that allows an attacker to trigger a DNS request for a host of
their choice could trigger a Denial of Service by getting the application
to resolve a DNS record with a larger number of responses.
https://nodejs.org/en/blog/release/v12.19.1/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f359580796)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will avoid the following build failure with xtensa:
[ 62%] Linking CXX executable ../../guids_test
[ 62%] Building CXX object retrace/CMakeFiles/retrace_common.dir/retrace.cpp.o
CMakeFiles/guids_test.dir/guids_test.cpp.o:(.debug_line+0xf7b): dangerous relocation: overflow after relaxation
collect2: error: ld returned 1 exit status
lib/guids/CMakeFiles/guids_test.dir/build.make:85: recipe for target 'guids_test' failed
Fixes:
- http://autobuild.buildroot.org/results/8fea93a88bb34e98e391a048c3b996b45ebac803
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0d209dce35)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a Linux system without IPv6 support (or booted with "ipv6.disable=1")
file /proc/net/snmp6 is not present. If such file is not present an allocated
memory is not freed. Memory leak occurs even without snmp queries.
Problem seen at least since netsnmp 5.7.3 (probably even v5.6.1).
Patch backported from netsnmp 5.9, where the problem does not appear any more.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5e6f6e0745)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt before 2.0.2 and NeoMutt before 2020-11-20 did not ensure that
$ssl_force_tls was processed if an IMAP server's initial server response
was invalid. The connection was not properly closed, and the code could
continue attempting to authenticate. This could result in authentication
credentials being exposed on an unencrypted connection, or to a
machine-in-the-middle.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 89a9f74fa8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_QT5BASE_OPENSSL was dropped by commit 4be1f9b9873
(package/qt5enginio: drop qt 5.6 support), but python-pyqt5 not updated to
match. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 54854dc44e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-29599: ImageMagick before 6.9.11-40 and 7.x before
7.0.10-40 mishandles the -authenticate option, which allows setting a
password for password-protected PDF files. The user-controlled password
was not properly escaped/sanitized and it was therefore possible to
inject additional shell commands via coders/pdf.c.
- Update license hash (correct wording to match Apache 2 license:
45e5d2493c)
https://github.com/ImageMagick/ImageMagick/blob/7.0.10-51/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b898e80639)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2019-14318: Crypto++ 8.2.0 and earlier contains a timing side
channel in ECDSA signature generation. This allows a local or remote
attacker, able to measure the duration of hundreds to thousands of
signing operations, to compute the private key used. The issue occurs
because scalar multiplication in ecp.cpp (prime field curves, small
leakage) and algebra.cpp (binary field curves, large leakage) is not
constant time and leaks the bit length of the scalar among other
information. For details, see:
https://github.com/weidai11/cryptopp/issues/869
- Update license hash due to the addition of ARM SHA1 and SHA256 asm
implementation from Cryptogams
1a63112faf4c9ca6b723https://www.cryptopp.com/release830.html
[Peter: adjust CVE info, issue is fixes in 8.3.0]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e7c789d48f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-ncurses install step attempts to run ldconfig, causing a permission
failure:
cd /buildroot/output/host/lib && (ln -s -f libncurses.so.6.0 libncurses.so.6; ln -s -f libncurses.so.6 libncurses.so; )
test -z "" && /sbin/ldconfig
/sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: Permission denied
make[3]: [/buildroot/output/host/lib/libncurses.so.6.0] Error 1 (ignored)
The error is non-fatal and ignored, but confusing.
The ncurses makefiles already avoid calling ldconfig when DESTDIR is set
(target case) but for host-ncurses DESTDIR is empty and the output/host path
is passed via --prefix.
Pass an empty ac_cv_path_LDCONFIG to the configure step, so than ldconfig is
not called.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 389f48fe90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'opkg.py' script installed by host-opkg-utils has as shebang:
#!/usr/bin/env python3
which may not be available on all host machines.
Add a potential dependency on host-python3 via BR2_PYTHON3_HOST_DEPENDENCY,
which will only add the host-python3 dependency if no python3 is already
available on the host.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7dcd20f9d5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PER_PACKAGE_DIRECTORIES=y, $(TARGET_DIR) is evaluated as
$(BASE_DIR)/target, but $$(TARGET_DIR) is evaluated as
$(BASE_DIR)/per-package/$(PKG)_NAME/target.
Signed-off-by: Tian Yuanhao <tianyuanhao@aliyun.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8d595c0d92)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building for an ARMv8 in 32-bit, Go does not yet support ARMv8
optimizations (see issue: https://github.com/golang/go/issues/29373)
but can still benefit from ARMv7 optimizations.
Signed-off-by: Michael Baudino <michael@baudi.no>
[yann.morin.1998@free.fr:
- move the comment to its own line, expand and reword it a bit
- reword the commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c59409afd9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes a typo in variable names that caused CC and CXX
environment variables to be empty.
Signed-off-by: Michael Baudino <michael@baudi.no>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4e81152078)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with CMake 3.4 CMake supports setting a compiler launcher
like ccache. The feature is described in
https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_COMPILER_LAUNCHER.html
This should be safe since everything is built for the host using make or ninja.
The use of *_ARG1 is discouraged by the cmake developers
https://cmake-developers.cmake.narkive.com/OTa9EKfj/cmake-c-compiler-arg-not-documented .
Without this patch I get the following error message with CMake 3.19.1 on Arch Linux.
Disabling BR2_CCACHE also resolves the issue.
/usr/bin/cmake [~]/buildroot/build/host-lzo-2.10/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="[...]" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_P
ATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="[...]" -DCMAKE_C_FLAGS="-O2 -I[...]/include" -DCMAKE_CXX_FLAGS="-O2 -I[...]/include" -DCMAKE_EXE_LINKER_FLAGS="-L[...]/lib -Wl,-rpath,[...]/lib" -DCMAKE_SHARED_LINKER_FLAGS="-L[...]/l
ib -Wl,-rpath,[...]/lib" -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="[...]/bin/ccache" -DCMAKE_CXX_COMPILER="[...]/bin/ccache"
-DCMAKE_C_COMPILER_ARG1="/usr/bin/gcc" -DCMAKE_CXX_COMPILER_ARG1="/usr/bin/g++" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=O
FF -DENABLE_SHARED=ON -DENABLE_STATIC=OFF )
-- The C compiler identification is unknown
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Check for working C compiler: [...]/bin/ccache
-- Check for working C compiler: [...]/bin/ccache - broken
CMake Error at /usr/share/cmake-3.19/Modules/CMakeTestCCompiler.cmake:66 (message):
The C compiler
Signed-off-by: Bernd Amend <bernd.amend@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0e310b4fd0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go1.15.6 (released 2020/12/03) includes fixes to the compiler, linker, runtime,
the go command, and the io package.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 267dd8b427)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TF-A supports stack smashing protection (-fstack-protector-*).
However, that feature is currently silently disabled because
ENABLE_STACK_PROTECTOR is not set during build time.
As documented in the TF-A user guide, the flag ENABLE_STACK_PROTECTOR
is required to enable stack protection support. When enabled the symbols
for the stack protector (e.g. __stack_chk_guard) are built.
This needs to be done because TF-A does not link against an external
library that provides that symbols (e.g. libc).
So in case we see that BR2_SSP_* is enabled, let's enable the corresponding
ENABLE_STACK_PROTECTOR build flag for TF-A as documented in the TF-A user guide.
This patch also fixes a the following linker errors with older TF-A versions
if BR2_SSP_* is enabled (i.e. -fstack-protector-* is used as compiler flag)
and ENABLE_STACK_PROTECTOR is not set, which are caused by the missing
stack protector symbols:
[...]
params_setup.c:(.text.params_early_setup+0xc): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x14): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x104): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x118): undefined reference to `__stack_chk_fail'
aarch64-none-linux-gnu-ld: ./build/px30/release/bl31/pmu.o: in function `rockchip_soc_sys_pwr_dm_suspend':
pmu.c:(.text.rockchip_soc_sys_pwr_dm_suspend+0xc): undefined reference to `__stack_chk_guard'
[...]
TF-A releases after Nov 2019, that include 7af195e29a4, will circumvent
these issue by explicitliy and silently disabling the stack protector
by appending '-fno-stack-protector' to the compiler flags in case
ENABLE_STACK_PROTECTOR is not set.
Tested on a Rockchip PX30 based system (TF-A v2.2 and upstream/master).
Signed-off-by: Christoph Müllner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7b3fcbcdaa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch '0001-fix-compile-time-atomic-detection.patch' claims to be Merged but
this is not true. The linked issue is closed with 'Needs information', and
the code itself is effectively not merged.
Clarify the 'Upstream-status' line to make this more clear.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 43021dfb77)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* 4.6.2: A vulnerability (CVE-2020-27783) was discovered in the HTML Cleaner
by Yaniv Nizry, which allowed JavaScript to pass through. The cleaner now
removes more sneaky "style" content.
* 4.6.1: A vulnerability was discovered in the HTML Cleaner by Yaniv Nizry,
which allowed JavaScript to pass through. The cleaner now removes more
sneaky "style" content.
For more details, see the changes file:
https://github.com/lxml/lxml/blob/lxml-4.6.2/CHANGES.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ea41a5faab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-27207: Zetetic SQLCipher 4.x before 4.4.1 has a
use-after-free, related to sqlcipher_codec_pragma and sqlite3Strlen30 in
sqlite3.c. A remote denial of service attack can be performed. For
example, a SQL injection can be used to execute the crafted SQL command
sequence. After that, some unexpected RAM data is read.
https://www.zetetic.net/blog/2020/11/25/sqlcipher-442-release
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f38893f8dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old git tree is unreachable now, switch to using the new one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c7bd3805bd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Weston does not work with the ti-sgx SDK, so switch to using the
KMS-based demos.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split off into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 29ff603f08)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
weston does not work on the ti-sgx SDK, so switch to using KMS directly,
and drop the wayland-related config options.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8efc5dce98)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scan.c in x11vnc 0.9.16 uses IPC_CREAT|0777 in shmget calls, which
allows access by actors other than the current user.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3b6a105af8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2020-12-12 12:02:27 +01:00
1797 changed files with 18426 additions and 20541 deletions
# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
