Like we do for the internal musl backend. We still see a large number of
build failures with musl, so warn users about it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The .la fixup handling looks for paths starting with /usr and assumes
that they are missing the installation prefix (i.e. $(STAGING_DIR)). It
already handles the cases that $(STAGING_DIR) itself and $(BASE_DIR)
are under /usr, but it does not yet handle the case that a
pre-installed external toolchain is under /usr (and tracks that fact
in some .la file). For instance, if you use buildroot to generate a
toolchain with HOST_DIR=/usr/local/some_path, this problem will occur.
Fix this in the same way as $(STAGING_DIR) and $(BASE_DIR), but in
addition check that TOOLCHAIN_EXTERNAL_INSTALL_DIR is non-empty. For
internal toolchains, it is empty and the sed expression would fail.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reported-by: Carlos Soto <csotoalonso@gmail.com>
Cc: Carlos Soto <csotoalonso@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libfreeimage fails to build on ARC, due to compiler issues:
Error: invalid register number `63'
This should probably be fixed at the compiler level.
It also fails to build on Blackfin, due to numerous libfreeimage
issues:
1/ Missing LL suffixes in Source/OpenEXR/IlmImf/ImfFastHuf.cpp. This
can be fixed by backporting upstream OpenEXR commit
57ecf581d0.patch.
2/ Invalid characters in libraw_x3f.cpp. This can be fixed by
applying dos2unix on the file.
3/ Usage of too long constants in an unsigned long in
dcraw_common.cpp, in code like "id == 0x4434303430" where id is
an "unsigned long" i.e 32 bits on 32 bits platform.
Due to (3) being apparently unsolved upstream, and causing a build
error on Blackfin, we disable libfreeimage on this
architecture. However, this code seems so broken that making
libfreeimage as entirely broken would maybe be a better option.
Fixes:
http://autobuild.buildroot.org/results/b33/b3372581c82786cc0a87f8cc2e78f047cc079255/ (ARC issue)
http://autobuild.buildroot.org/results/f3b/f3bd6be448cffed3caae7850233168e6d0f6a5bd/ (Blackfin issue)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gdbserver does not build on Blackfin FLAT (undefined reference to
`_td_thr_tlsbase') and while it builds on Blackfin FDPIC, it's pretty
unlikely that it is going to work properly with the cross-gdb provided
by the Analog Devices toolchain: the Analog Devices toolchain provides
a 6.6 cross-gdb, while we use gdb 7.8.2 for gdbserver.
Therefore, let's simply disable gdb completely for Blackfin.
Fixes:
http://autobuild.buildroot.org/results/2e5/2e5310d0e869f036ec70b978c62c7bd9d3d2bd70/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default libcurl uses the C library's DNS resolver which is
synchronous, even if an application is using libcurl's non-blocking mode
of operation.
Configure libcurl to use c-ares if it is selected so that it can resolve
addresses asynchronously if required.
[Peter: explicitly disable c-ares support if not enabled]
Signed-off-by: John Keeping <john@keeping.me.uk>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In static linking scenarios, poppler doesn't find libtiff because it
doesn't use pkg-config, so it doesn't know which additional libraries
it should link with to test the availability of libtiff. We help
poppler in this work by passing a LIBTIFF_LIBS variable, resulting for
a pkg-config invocation.
Also, since poppler uses pkg-config, we make this dependency explicit
in this patch, even though it was already carried by the fontconfig
dependency.
Fixes:
http://autobuild.buildroot.org/results/be7/be78957dd852233c81bd364ddf664564ce8f0208/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When configuring poppler, a shell error occurs:
./configure: line 19741: test: x: unary operator expected
This is due to an invalid configure test, which is fixed by a newly
added patch. We patch the configure script directly because poppler
doesn't autoreconf properly. A patch on configure.ac has been
submitted upstream so that hopefully we can drop our patch in a future
release of poppler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel does force compile with -m4-nofpu, which is only
available when building a multilib toolchain.
The interesting part here is, that buildroot use --disable-multilib for
gcc configure, but enables --with-multilib-list=m4,m4-nofpu in
the default configuration for Qemu targeting r2d emulation.
This results in a toolchain, which can be used for the kernel and
for userland without creating a multilib toolchain with different
kinds of libgcc version. In the multilib case there would be
subdirectories created (!m4 and m4-nofpu). As buildroot uses a
short version of toolchain creation, a multilib enabled gcc build
fails when creating libgcc.
So the best solution is to just keep multilib disabled, but always
add --with-multilib-list when sh4/sh4eb/sh4a/sh4aeb is choosen.
Tested with sh4/sh4a toolchain build and qemu defconfig with
gcc 4.8.x/4.9.x (with and without C++ enabled), uClibc and glibc.
Disable sh4a/sh4aeb for uClibc, as it does not implemented, yet.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
(ARM and SH4 uClibc toolchain builds)
If those flags are not explicitly passed, the libecore configure
script will include -I/usr/X11R6/include and -L/usr/X11R6/lib in the
compile flags, which are obviously unsafe for cross-compilation.
The fix is similar to "package/efl/libevas: x-includes and x-libraries
must be set for cross-compiling" done by Romain Naour on libecore.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
cc-tool provides support for Texas Instruments CC Debugger
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Arnout: avoid adding /usr/local to library path]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set date.timezone in php.ini to match time zone settings.
Prevents a warning being logged about it not being set
each time a PHP date/time method is used.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove low-level settings from config.txt like arm_freq and sdram_freq.
The defaults should be good for most and differ by Pi model.
E.g. the Pi 2 runs at 900 Mhz by default, setting arm_freq=700
like we had previously would underclock it.
Add short description in comments to options.
Mention initramfs option.
Remove obsolete options from cmdline.txt
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch:
* bumps mono version to 4.0.1.
* Removes no more needed patches included upstream
* Removes profile switches no more present in configure
[Thomas:
- add Config.in.legacy handling for the removed options.
- remove the select that ensured at least one of the .Net runtime
version was enabled.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This one is a bit tricky, as the version can come from the linux-headers
package, so we must also account for that.
We currently have no hash file for linux, but better do the change now,
which allows us to later add a hash file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As we recently did for U-Boot, disable checking hashes for custom
versions of barebox.
Note that we currently have no hash file for barebox, but avoiding the
check will already be in place when we do add it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For custom tarballs, it's quite obvious we can not check hashes.
For custom versions, that's not so obvious. One might think we could
have hashes for all the official releases, but that's not possible: if
the user uses a released version of Buildroot (say 2015.05) much later
in the future, and wants to use the then-released 2038.02 U-Boot. It now
seems pretty obvious that Buildroot 2015.02 can't know the hash for
U-Boot 2038.02.
So, disable checking the hash for custom tarballs and custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Vincent Stehle <vincent.stehle@laposte.net>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, assigning to BR_NO_CHECK_HASH_FOR but referencing variable
assigned to later, fails. Here's a failing test-case, which is the
reduced test-case of how we handle BR_NO_CHECK_HASH_FOR for now (warning
added for test-case):
export BR_NO_CHECK_HASH_FOR
BR_NO_CHECK_HASH_FOR += $(XENOMAI_SOURCE)
XENOMAI_VERSION = 2.6.4
XENOMAI_SOURCE = xenomai-$(XENOMAI_VERSION).tar.bz2
$(warning BR_NO_CHECK_HASH_FOR='$(BR_NO_CHECK_HASH_FOR)')
all:
Run it with simply make:
$ make
BR_NO_CHECK_HASH_FOR=' '
Now, change the first line to read:
export BR_NO_CHECK_HASH_FOR =
And we now get:
$ make
BR_NO_CHECK_HASH_FOR=' xenomai-2.6.4.tar.bz2'
This new behaviour will be needed later for Xenomai, which handles the
version string in an unusual way, so we can exclude its custom versions.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
HOST_CONFIGURE_OPTS is a superset of HOST_MAKE_ENV, so there is no need to
pass them both. Also use HOST_CONFIGURE_OPTS for the install step for
consistency, and finally, add host-pkgconf to _DEPENDENCIES as it is
explicitly used (currently gets pulled in by host-libusb though).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now network-manager depends on glibc, there is no need anymore for the
wchar and threads dependencies (implied by glibc). So remove them.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This host package allows to build tools to download and execute code on
Freescale i.MX5/i.MX6 and Vybrid SoCs through the Serial Download
Protocol.
The work behind this commit was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install a custom php-fpm.conf instead of the stock one.
- Listening on /var/run/php-fpm.sock instead of TCP port so we can
restrict access to webserver user www-data.
- Using ondemand pm, so PHP children are only started after a PHP
request, instead of kept resident all the time.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 53903a15 (*config: improve handling of BR2_LEGACY) added an
option to entirely skip legacy entries, by passing a variable in the
environment.
However, it missed one location where that variable is also needed,
which is generating the list of packages and deprecated features for
inclusion in the manual.
Fix that by re-using the global $(COMMON_CONFIG_ENV) variable,
overriding just what we don't want (i.e. br2-external location and
defconfig path).
Also, slightly re-order variables so the ones we override come right
after the common settings, moving the specific ones at the end, one
variable per line.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Xorg driver for imx6. Inspired from Yocto project.
I did not find any problem, but notice Yocto project force Xorg xserver
1.14.4 while we use 1.16.
Notice Vivante driver should be able to provide Desktop OpenGL implementation.
However, this feature seems broken for a while[1]. Yocto use Mesa3D/swraster
to provide Desktop OpenGL API[2].
[1] http://comments.gmane.org/gmane.linux.embedded.yocto.meta-freescale/8253
[2] See recipes-graphics/xorg-driver/xf86-video-imxfb-vivante_3.10.17-1.0.1.bb
in meta-fsl-arm layer
Tested with:
subsequent qt5base and libdrm fixes +
QMX6 board +
BR2_ARM_EABIHF= both tested
BR2_ARM_ENABLE_NEON=y
BR2_ARM_FPU_NEON=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_TARGET_GENERIC_GETTY_PORT="ttymxc1"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_GIT=y
BR2_LINUX_KERNEL_CUSTOM_REPO_URL="https://git.congatec.com/arm/qmx6_kernel.git"
BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="9bafbcba67f7bb2a48a5e05998cecb1165aa444f"
BR2_LINUX_KERNEL_DEFCONFIG="qmx6"
BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x10008000"
BR2_LINUX_KERNEL_DTS_SUPPORT=y
BR2_LINUX_KERNEL_INTREE_DTS_NAME="imx6q-qmx6"
BR2_PACKAGE_QT5=y
BR2_PACKAGE_QT5BASE_LICENSE_APPROVED=y
BR2_PACKAGE_QT5BASE_EXAMPLES=y
BR2_PACKAGE_QT5BASE_OPENGL_ES2=y
BR2_PACKAGE_QT5BASE_OPENGL_LIB=y
BR2_PACKAGE_QT5BASE_XCB=y
BR2_PACKAGE_QT5BASE_DEFAULT_QPA="xcb"
BR2_PACKAGE_QT5BASE_GIF=y
BR2_PACKAGE_QT5BASE_JPEG=y
BR2_PACKAGE_QT5BASE_PNG=y
BR2_PACKAGE_QT5QUICKCONTROLS=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XDRIVER_XF86_INPUT_EVDEV=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_IMX_VIV=y
BR2_PACKAGE_FREESCALE_IMX=y
BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX6Q=y
BR2_PACKAGE_GPU_VIV_BIN_MX6Q=y
BR2_PACKAGE_GPU_VIV_BIN_MX6Q_EXAMPLES=y
[Thomas:
- license is GPLv2+ and not GPLv2
- use full destination path when using $(INSTALL), and use -D option.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
merge
To compile with Vivante header and use framebuffer, it is necessary to
pass option -DEGL_API_FB. This option is declared in pkg-config file of
Vivante library. But many packages (especialy qt5 components) does not
consider these flags.
So instead of patching every packages that use EGL, it is more
convenient to patch Vivante headers.
This commit add #define EGL_API_FB on top of eglvivante.h when
necessary.
[Thomas: fix syntax error.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Thus, it is possible to force compilation of Gallium/DRI support in
mesa3d even if no Gallium/DRI drivers are selected. This is intended to
be used by external OpenGL provider (especialy further imx6 support).
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Tested-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 1.1.6, the mips softfloat toolchains are merged into the mips
toolchain using multilib. Our external toolchain infrastructure copies
the correct version to the target depending on the BR2_SOFT_FLOAT
option.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add hashes for all musl toolchains, including the ones that we
currently don't support (arm hf, sh4, x86_64-x32).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For Linaro toolchains, a special post install staging hook is used to
create two symlinks needed for the dynamic loader to find the
libraries. However, the way the link is created prevents a 'make
toolchain-external-reinstall' from succeeding, because the symlink
already exists and points to a directory:
ln -sf . /home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf
ln: '/home/thomas/projets/outputs/training/target/lib/arm-linux-gnueabihf/.': cannot overwrite directory
This commit adjust the hook to pass the '-n' option so that the link
name is treated as a normal file if it is a symbolic link to a
directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This uClibc toolchain does not provide an appropriate uClibc
configuration for Buildroot: missing IPv6, missing nsl stub, missing
program invocation, etc. Therefore, we mark it as broken, waiting for
a new upstream release of a new toolchain.
We keep around the toolchain-external Synopsys code anyway, since it
will most likely be identical for the new toolchain version. However,
we remove all the quirks that were introduced to start work around
issues related to this toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to C standards isprint argument shall be representable as an
unsigned char or be equal to EOF, otherwise the behaviour is undefined.
Passing arbitrary ints leads to segfault in nm program from elfutils.
Restrict isprint argument range to values representable by unsigned char.
Note: a similar change was done to the internal argp implementation of
glibc in commit
https://sourceware.org/git/?p=glibc.git;a=commitdiff;h=9055724a92433ffa4c36f93d918ee1b3dfa1d6f7.
[Thomas: add a reference to the corresponding glibc fix.]
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git:// protocol may not go through conservative corporate firewalls.
Use http, that goes out through about anything.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This brings the raspberrypi_dt_defconfig up to the same kernel used by
the raspberrypi2_defconfig. Also changed the git URL to use HTTP for
consistency.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This changes the kernel used on the Raspberry Pi 2 from the 3.19 branch
back to the 3.18 branch. This provides a couple of advantages:
1. mmc0 works again. Floris Bos found out that this was due to using
the precompiled DTB files from rpi-firmware. These DTBs were built
using 3.18.
2. The rpi-3.18.y branch is not regularly rebased like rpi-3.19.y
according to popcornmix. See
https://github.com/raspberrypi/linux/issues/915.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Reviewed-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously the stock lighttpd configuration was patched to run as user root,
because we do not have a lighttpd user.
Patch it to use www-data instead, which is a user available in the default
skeleton, and is the same other webserver packages (like nginx) use.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Clamav uses AC_TRY_RUN in m4/reorganization/code_checks/ipv6.m4 to check
for ipv6 support, which is not cross-compile safe. Since buildroot
supports ipv6 out-of-the-box now this patch forces ipv6 support.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop LIBTOOL/GETTEXTIZE as well since it's no longer bundled with a beta
version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2013-3153 - sensitive HTTP server headers also sent to proxies.
And drop upstream patches.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Security patch now upstream so drop it.
Also switch to bz2 compression.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 6b1f66643d.
It turns out to not really fix the build errors after all, so revert it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, libwebsockets.mk is passing -DWITHOUT_TESTAPPS=ON to disable
the building of libwebsockets test applications, but this is doing nothing
because the option is really named LWS_WITHOUT_TESTAPPS.
This commit fixes that by using the correct option name.
Signed-off-by: Baptiste Moraine <baptiste.moraine@kapelse.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If QT_COORD_TYPE_DOUBLE is forced and hard float is used, Qt compilation
breaks because it can't find hard coded operations on double.
Moreover, QT_COORD_TYPE is float only if QT_NO_FPU is set.
(cf src/corelib/global/qglobal.h)
So, we can safely make the QT_COORD_TYPE_DOUBLE option depend on
BR2_SOFT_FLOAT.
Reported-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All patches are simply refreshed, except
002-properly-detect-if-python-build.patch which is removed because an
identical fix has been merged upstream:
e128ea78e5
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Suboptions of package foo should be prefixed with BR2_PACKAGE_FOO, not just
BR2_FOO.
Also add Config.in.legacy handling for it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
nvidia-tegra23-codecs provides various HW-accelerated media codecs, such
as: AAC3, h264, jpeg, MP3...
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
[me:
- split codecs from binaries into this patch
- use our extractor helpers
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove <pkg>_DEPENDENCIES variable that contained
nvidia-tegra23-binaries, since this dependency is a runtime
dependency only.
- Remove 'NVIDIA_TEGRA23_CODECS_INSTALL_STAGING = NO', since this is
the default.
- Remove 'NVIDIA_TEGRA23_CODECS_INSTALL_TARGET = YES', since this is
the default.
- Instead of using a NVIDIA_TEGRA23_CODECS_FIRMWARE variable listing
the firmware files to copy, simply copy all firmware files.]
[Thomas:
- add missing libXv dependency.
- remove the NVIDIA_TEGRA23_BINARIES_GSTREAMER_PLUGINS and
NVIDIA_TEGRA23_BINARIES_MULTIMEDIA_APPS, and use simple 'cp -dpfr'
calls to copy the plugins and sample applications.]
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
[yann.morin.1998@free.fr: split out into their own patch]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds a new package for all libraries and drivers
provided by Nvidia Linux4Tegra release 16.5.
We have intermediate .mk and Config.in, because those values will be
shared with the codecs package, to come in a follow-up patch, like we
have for the Freescale stuff.
Signed-off-by: Nicolas Serafini <nicolas.serafini@sensefly.com>
[yann.morin.1998@free.fr:
- split jpeg into its own patch
- split codecs and gstreamer plugins out into their own packages
- do not patch for .pc files, just bundle them in $(@D)
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ben Ben <carmazen84@gmail.com>
[Thomas:
- don't select BR2_PACKAGE_XLIB_LIBXT, there is no reference to it
in <pkg>_DEPENDENCIES, and it doesn't seem to be used by any
library.
- select BR2_PACKAGE_XLIB_LIBX11, which is referenced by the .mk
file, and is actually used by the pre-built .so files.
- do not select BR2_PACKAGE_XLIB_LIBXV, since it isn't used by the
X.org libraries/drivers, but only the Gstreamer ones.
- remove 'NVIDIA_TEGRA23_BINARIES_INSTALL_TARGET = YES', it is not
needed since it is the default.
- remove the definitions of NVIDIA_TEGRA23_BINARIES_FIRMWARE,
NVIDIA_TEGRA23_BINARIES_LIBRARIES and
NVIDIA_TEGRA23_BINARIES_PKGCONFIG, these are very long, and not
really needed: just copy all the firmware, libraries and .pc files
with a simple 'cp -dpfr'.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some old binary blobs drivers, like the NVidia Tegra2/3 blobs, only
implement an old VIDEODRV ABI.
Since VIDEODRV ABIs are not backward compatible [0], lets introduce an
older Xserver version that supports such an old ABI.
[0] http://www.x.org/wiki/XorgModuleABIVersions/
[Thomas:
- rename option BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14_7 to
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_14
- add hash file, change provided by Nicolas Serafini.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Support for the Present protocol has been added to, and is mandatory
since version 1.15.
As we're on the verge of adding 1.14.7, we need to make Present a
version-specific dependency.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The upcoming NVidia Tegra2/3 binary blobs only work with a certain
VIDEODRV ABI (namely up to 14), so we must have a way to represent that
ABI so that such packages can not be enabled with a too recent/old ABI.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Only a single entry for now, but we'll add one more in an upcoming
patch, to support old binary-only drivers, like the NVidia Tegra2/3
drivers.
[Thomas:
- rename option from BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_17_1 to
BR2_PACKAGE_XSERVER_XORG_SERVER_V_1_17, since we don't want to
rename the option at each minor release of the X.org server, and
X.org servers with the same major version will not have a different
ABI.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With this commit, one can now execute the source-check, external-deps
and legal-info targets regardless of the checks normally being done by
packages on the configuration.
Note that we intentionally do not go down the road of adding %-source,
%-legal-info, and the miryad of other targets that could work in such
situations. We only whitelist a few targets that are really useful to
have as nobuild_targets.
[Thomas: also add 'clean' and 'distclean' to the nobuild_targets, as
suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages do some sanity checks on their configuration, for
example linux checks that the defconfig string is not empty when a
defconfig is used. Such checks are currently always performed, except
when the 'source' target is part of make goals.
This is problematic for two reasons:
- Other targets such as 'source-check', 'external-deps' or
'legal-info', that do not consist in doing a build, cannot be
executed in such situations.
- The current code removes the check as soon as one of the targets is
source. But if there are other non-source targets called at the
same time, the checks are ignored.
This commit therefore introduces an internal variable called
BR_BUILDING, which tells packages if we are actually building or
not. A variable nobuild_targets indicates the targets that we do not
consider as being build targets.
For the moment, nobuild_targets only contains 'source', to be
completely iso-functional.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Now that all the external-deps, source-check and source targets are
properly implemented based on the package infrastructure, the
PACKAGES_SOURCE, TARGET_HOST_DEPS, HOST_DEPS and HOST_SOURCE variables
are no longer needed. This is a good thing since they were anyway
incorrect, as they were only doing a two level recursion in the
dependencies of host packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested with a randpackageconfig]
Now that all the bits are in place, switch the global 'source' target
to use the package infrastructure logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[with 'make source' (actually together with the next patch).]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested with a randpackageconfig]
Now, both the download and source-check code are iterating over
<pkg>_SOURCE, <pkg>_PATCH and <pkg>_EXTRA_DOWNLOADS elements, figuring
out whether they contain full URLs or not. Instead of doing this
repeatdly, this patch introduces an internal <pkg>_ALL_DOWNLOADS
variable, which contains the list of everything that needs to be
downloaded, with URLs already expanded to take into account <pkg>_SITE
if needed.
This allows to simplify quite significantly the .stamp_download and
source-check implementation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Some of the SOURCE_CHECK_* macros are using a non-standard two-spaces
indentation. This commit switches them to use a single tab based
indentation, like in the rest of Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[with git show -w]
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The DL_MODE variable is now no longer used with any other value than
"DOWNLOAD", so it no longer makes sense to have this variable at
all. Therefore, this commit gets rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The .stamp_downloaded target is now only being used to really
download, and no longer for other activities like "source check" or
"external deps". So the check on DL_MODE being equal to DOWNLOAD is no
longer necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The only reason for the .stamp_rsync_sourced fake stamp file target to
exist was to handle the SOURCE_CHECK operation on packages using the
OVERRIDE_SRCDIR mechanism. Now that this is handled directly inside
$(1)-source-check, there is no longer any need for this part of the
code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit switches the implementation of the global source-check
target to use a package infrastructure based mechanism, using the
$(1)-all-source-check target added in the previous commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commits extends the common package infrastructure with the
$(1)-source-check and $(1)-all-source-check targets.
The $(1)-source-check target simply calls the newly added
SOURCE_CHECK macro on all items to be downloaded.
The $(1)-all-source-check target will depend on the
$(1)-all-source-check targets of all dependent packages and the
$(1)-source-check target of the current package, which allows to do a
recursive source-check in the dependency tree.
[Thomas: move the code around a bit to avoid repeating the
<pkg>_OVERRIDE_SRCDIR condition, as suggested by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As part of moving to a package infrastructure based source-check
implementation, we are going to move away from the global DL_MODE
variable to select the behavior of the DOWNLOAD_INNER macro.
As a preparation to this, this commit makes the DOWNLOAD_INNER macro
take a third argument, which is the action to be done: either DOWNLOAD
or SOURCE_CHECK. For now, the DOWNLOAD macro passes $(DL_MODE) as this
third argument, in order to keep the existing behavior.
In addition, a SOURCE_CHECK macro is added, which calls DOWNLOAD_INNER
with the appropriate action. This macro will be used in the upcoming
package infra based implementation of source-check.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[tested by doing a "make source" on a randpackageconfig]
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
make source-check is here to check whether the remote sources for the
current selection of packages are still available. In its current
implementation, since it simply calls recursively a sub-make with the
source target, it can be a noconfig_targets. However, a follow-up
change will make source-check not use a sub-make, which will require
it to no longer be a noconfig_targets.
Therefore, as a preparation, this commit moves source-check outside of
noconfig_targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Now that the external-deps implementation relies on the per-package
<pkg>-all-external-deps and <pkg>-external-deps targets and no longer
on the 'source' target with a custom DL_MODE, we can get rid of the
support for the SHOW_EXTERNAL_DEPS DL_MODE value in the pkg-download
logic.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This commit changes the global 'external-deps' target to use the newly
introduced per-package <pkg>-all-external-deps, instead of relying on
the 'source' target with a custom DL_MODE.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The $(1)-all-{source,external-deps,legal-info} targets currently only
take care of the dependencies in <pkg>_DEPENDENCIES, but not
<pkg>_PATCH_DEPENDENCIES. This patch fixes that by introducing a
<pkg>_FINAL_ALL_DEPENDENCIES. It also reworks the $(1)-show-depends
target to make use of <pkg>_FINALL_ALL_DEPENDENCIES.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Bump ccache from v.3.1.x to v.3.2.x.
All functionality remained the same.
- Configure now accepts a parameter to use ccache's internal zlib.
- conf.c was introduced and some settings were moved from ccache.c,
with minor changes.
- The PATCH_CONFIGURATION hook was moved from POST_CONFIGURE to
POST_PATCH, as patching files should be done there, before calling
the configure script.
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fminf and others got implemented in the time after this
patch was added. Remove the workaround to get mesa compiled
with uClibc-ng.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit 4570dbcb14
("4570dbcb14b394d8f3c97baf4c9e5f4f225d1d37") added the dependencies of
rootfs building logic to PACKAGES, only thinking about the case where
rootfs building logic actually depends on real, normal packages
(host-mtd, host-genext2fs, etc.). But some file systems (rootfs-ubi)
depend on other filesystem images (rootfs-ubifs). And such targets
should not be added to PACKAGES, otherwise an incorrect circular
dependency is created.
This commit fixes that by only adding the rootfs building logic
dependencies that do *not* start with rootfs- to the global PACKAGES
variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas:
- remove reference to BR2_LARGEFILE, this option has been
removed. Largefile support is now guaranteed to be present.
- rewrap Config.in help text to the appropriate length.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In very constrained cases, it might be needed to not fail if a hash is
missing. This is notably the case for custom external toolchains to be
downloaded, because we do have a .hash file for external toolchains,
but we obviously can not have hashes for all existing custom toolchains
(he, "custom"!).
So, add a way to avoid failing in that case.
>From the Makefile, we export the list of files for which not to check
the hash. Then, from the check-hash script, if no check was done, and
the file we were trying to match in in this exclusion list, we just exit
without error.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
changes v6 -> v7:
- /beautify/ the pattern in the case clause
Changed v5 -> v6: (Arnout)
- fix the pattern in the case clause
Changes v4 -> v5:
- micro-optimisation, use case-esac instead of a for-loop (Arnout)
- typoes (Arnout)
Changes v3 -> v4:
- drop the magic value, use a list of excluded files (Arnout)
Changes v1 -> v2:
- fix typoes in commit log
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The old hash for 2014.08 was never updated. Since uclibc-arc-2014.12 is
downloaded from the github helper, it is converted into a 'none' hash.
Reordered the hashes so the none-hashes are together.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
gtest has moved from the autotools to CMake, but the CMake build
system is currently not installing the gtest-config script. Work
around that by installing it manually, after doing the necessary
sed-ing from the gtest-config.in template.
Reported-by: Carlos Santos <casantos@datacom.ind.br>
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- move package to 'Libraries -> Graphics'
- wrap the Config.in help text
- change license from "Zlib" to "zlib license" to match what the
zlib package is doing.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the mailinglist, this should be deprecated
before removal.
[Thomas: don't add to Config.in.legacy.]
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using a colon or a space in a make target doesn't work, so they have to
be filtered out of the PKG_VERSION variable just like the / currently
already is.
This will be needed for date-based CVS versions.
Add a helper macro 'sanitize' in pkg-utils.mk to implement this. This
also moves the strip to the inner level for the target branch.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
http://autobuild.buildroot.net/results/53f/53fd9003a4cf7d128f4d64d43209fe26d859a829/http://autobuild.buildroot.net/results/53f/53fd9003a4cf7d128f4d64d43209fe26d859a829/dovecot-2.2.16/config.log
shows this pthread related link error during configure
sqlite3.c:(.text+0x5106): undefined reference to `pthread_mutex_trylock'
/home/test/autobuild/instance-2/output/host/usr/i686-buildroot-linux-uclibc/sysroot/usr/lib/libsqlite3.a(sqlite3.o): In function `pthreadMutexAlloc':
sqlite3.c:(.text+0x91fb): undefined reference to `pthread_mutexattr_init'
sqlite3.c:(.text+0x9205): undefined reference to `pthread_mutexattr_settype'
sqlite3.c:(.text+0x920e): undefined reference to `pthread_mutex_init'
sqlite3.c:(.text+0x9216): undefined reference to `pthread_mutexattr_destroy'
sqlite3.c:(.text+0x9234): undefined reference to `pthread_mutex_init'
Trying to fix it in dovecot.mk by
+# dovecot forgets to compile/link with -pthread breaking static linking
+DOVECOT_CONF_ENV += CFLAGS="$(TARGET_CFLAGS) -pthread" LIBS="-pthread"
results in a build error later on
setresgid.c:(.text+0x0): multiple definition of `setresgid'
which might be fixed in uclibc by porting
http://git.buildroot.net/buildroot/tree/package/uclibc/1.0.2/0001-fix-static-linking-of-pthread-apps.patch
but, at the end, I think it is better to not build Dovecot as a static
binary since it is heavy modularized and not worth the effort. Therefore
remove two patches fixing static linking, since they are not needed anymore.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow QEMU to be installed on MIPS targets. Also introduce a new
symbol (BR2_PACKAGE_QEMU_ARCH_SUPPORTS_TARGET) to hold the
architectures than can build and use QEMU on the target.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove all utility-specific options in favour of a generic
option which select either all or no packages. If users
want something more fine-grained than that, they can always
remove the unnecessary tools in a post-build script.
Since tiff has no configure option or Makefile target to prevent
the build/install of its utilities specific Makefile targets are
called to build the libtiff and, optionally, the utilities.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Arnout: more compact implementation, slightly extend help text]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add upstream patch fixing CVE-2015-1863: buffer overflow of SSID buffer within
struct p2p_device that is allocated from heap.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes segfault in xtensa ltrace caused by infinite recursion in the
function dwfl_report_elf calling other version of that function.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When listing defconfig files was moved to its own make target, it was
not added to the general help text.
However, this is a very important topic, so list it.
[Peter: drop ':' character]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use install/fast target in order to skip compilation in installation
step. The same trick has just been used in pkg-cmake.mk for all CMake
packages.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
curldebug is a more advanced form of debugging for curl which audits
source code with the checksource.pl tool, and treats warnings as errors.
Normally users won't want/need this so disable it since it leads to
failed builds when debug info is enabled (which is what people normally
want).
When buildroot does --enable-debug curl inherently enables curldebug too.
Solves bug #8041.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 1.1.6 version of musl-cross fixes the two issues that had been
preventing versions after 1.1.1 being used by buildroot, namely:
- sysroot is enabled again
- kernel headers are included again
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With CMake build system, the "make install" command always compiles
before installing, to make sure that everything is up-to-date.
In Buildroot environment, this is quite useless, because the package
has always already been compiled, either at first build, or when
invoking "make <package>-rebuild".
In all cases, when it comes to staging or target installation step, the
package has just been compiled.
Using "make install/fast" - in order to skip the compilation step - is
therefore more appropriate, more consistent with what other build
systems do, and saves time when you need to rebuild your package.
Signed-off-by: Cédric Marie <cedric.marie@openmailbox.org>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-3144 - host name out of boundary memory access
CVE-2015-3145 - cookie parser out of boundary memory access
CVE-2015-3148 - Negotiate not treated as connection-oriented
CVE-2015-3143 - Re-using authenticated connection when unauthenticated
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Remove BR2_INET_IPV6 select for predefined external toolchains.
Remove the (non)IPv6 option prompt since it's now mandatory.
And force the toolchain check now that internal uclibc is always built
with IPv6 support and external non-IPv6 toolchains are disallowed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally we'd deprecate them, but:
1) They don't support IPv6 and it's being removed so it makes no sense.
2) They're based on uClibc 0.9.30-ish which is very old and surely has
package build breakage all over it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For a multi-arch toolchain, gconv modules are in a sub-directory named
after the machine gcc targets. This is the case, for example, for the
Linaro ARM 2014.09 toolchain, which has the gconv modules in (relative
to the sysroot):
/usr/lib/arm-linux-gnueabihf/gconv
while the Sourcery CodeBench ARM 2014.05 (non-multi-arch) has them in:
/usr/lib/gconv
So, to catter for both cases, search both paths. We want to favour the
machine-specific gconv modules over potentially existing "generic" ones,
so we first search that (if it exists) and fallback to looking in the
generic location.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
* Move service files to /usr/lib/systemd/system/
* Only disable systemd support on non-systemd systems
[Thomas: use positive logic for the systemd test.]
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current configuration system does not check for cached variables for
these flags, and thus they are always disabled when cross-compiling.
This patch fixes the configuration system to use cached variables and
enables them at configuration time.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit removes BR2_LINUX_KERNEL_EXT_RTAI_PATCH because this
option never worked. It was added in commit
8797a9cd1f, which added package/rtai/
and RTAI as a Linux extension.
The option prompt says "Path for RTAI patch file", so let's say you
specify /home/foo/bar/myrtai.patch as the value for
BR2_LINUX_KERNEL_EXT_RTAI_PATCH.
Then the code does:
RTAI_PATCH = $(call qstrip,$(BR2_LINUX_KERNEL_EXT_RTAI_PATCH))
and we have a package called 'rtai', so the normal logic of
<pkg>_PATCH applies. Since the <pkg>_PATCH value does not contain
ftp://, http:// or https://, the package infrastructure will try to
download $(RTAI_SITE)/$(RTAI_PATCH), i.e:
https://www.rtai.org/userfiles/downloads/RTAI/home/foo/bar/myrtai.patch
Pretty clear that it has no chance of working.
Now, let's assume an URL is used as the value of
BR2_LINUX_KERNEL_EXT_RTAI_PATCH, such as
http://foo.com/bar/myrtai.patch. In this case, it will be properly
downloaded by the package infrastructure. But then, the following code
kicks in:
define RTAI_PREPARE_KERNEL
$(APPLY_PATCHES) \
$(LINUX_DIR) \
$(dir $(RTAI_PATCH)) \
$(notdir $(RTAI_PATCH))
endef
The value of $(dir $(RTAI_PATCH)) will be http://foo.com/bar/. How
can $(APPLY_PATCHES) make use of such a stupid patch location?
[Thomas: add Config.in.legacy handling, as suggested by Arnout, even
if we believe that no-one could have ever used this option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add rngd.service for systemd. Also patch rngd with patch from Fedora to
ignore failure if no hwrng present:
https://bugzilla.redhat.com/show_bug.cgi?id=892178
[Thomas:
- rename patch to the proper naming convention
- add description and SoB to patch
- install service file to /usr/lib/systemd and not /lib/systemd
- use a relative symbolic link instead of an absolute one]
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When using busybox compiled from current git, login emits the following
message:
login: /etc/group: bad record
Fix it by adding the missing colon to /etc/group in system/skeleton.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following problems found by buildroot should be fixed:
* static python2 compile (there is still a general problem, not related to uClibc-ng)
* postgresql configure hickup (link warnings got removed)
* samba runtime problems (RPATH in executables are respected)
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The manual target installation commands optionally copy 3 executables
that demonstrate the library usage, but do not the library itself.
This results in the following errors at runtime:
# openRTSP
openRTSP: can't load library 'libliveMedia.so.38'
# live555MediaServer
live555MediaServer: can't load library 'libliveMedia.so.38'
# MPEG2TransportStreamIndexer
MPEG2TransportStreamIndexer: can't load library 'libliveMedia.so.38'
#
Tested with the following defconfig, which is basically
qemu_arm_versatile_defconfig plus C++ and live555:
BR2_arm=y
BR2_KERNEL_HEADERS_VERSION=y
BR2_DEFAULT_KERNEL_VERSION="4.0"
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_0=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_TARGET_GENERIC_GETTY_PORT="ttyAMA0"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.0"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/arm-versatile/linux-4.0.config"
BR2_LINUX_KERNEL_ZIMAGE=y
BR2_PACKAGE_LIVE555=y
BR2_TARGET_ROOTFS_EXT2=y
Fix the whole installation step by using the 'make install' step provided
by the upstream package, similar to what was done in commit
44d15563c7 for the staging installation.
Note: this change has the effect of installing unconditionally all the
test and demo executables produced by the live555 compilation process,
and that were previously not (or optionally) copied. This increases the
uncompressed target filesystem size by roughly 300 kB (tested for a
32-bit ARM target). Undesired files can be deleted in a post-build script.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Remove dependency on python (already a dependency of python-sip),
and add a dependency on host-python-sip, since python-sip no longer
depends on host-python-sip.
- Make the code Python 2 / Python 3 compatible (both have been
tested).
- Fix indentation all over the place.
- Remove double quotes when defining variable values, not needed.
- Add <pkg>_BUILD_CMDS to do the build process separately from the
installation.
- Create a PYTHON_PYQT_CONF_OPTS variable with all the config
options, since some of them are now conditional.
- Use 'compileall' to byte-compile the dummy __init__.py.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
With the current python-sip package, the sip.h header is installed in
$(STAGING_DIR)/usr/include/python3.4/, while Python headers are
expected to be installed in $(STAGING_DIR)/usr/include/python3.4m/
(notice the 'm' at the end).
Since with this, the directory name for the headers and libraries is
not the same, this patch introduces separate PYTHON_SIP_LIB_DIR and
PYTHON_SIP_INCLUDE_DIR variables, and use them for the --destdir and
--incdir options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Based on http://lists.busybox.net/pipermail/buildroot/2013-October/080830.html
[Thomas:
- fix license information: it is a "or" between the SIP license,
GPLv2 and GPLv3
- the target version of python-sip does *not* need the host version
of python-sip, it can build perfectly fine without it. python-qt
will need host-python-sip, but there's no need to have this
dependency between python-sip and host-python-sip.
- add support for Python 3, since the package could also be enabled
for Python 3.
- add <pkg>_BUILD_CMDS for host and target variants, so that the
build does not take place when doing the installation.
- use HOST_MAKE_ENV and TARGET_MAKE_ENV where appropriate.
- fix indentation.
- propagate the thread and mmu dependencies from Qt.
- extend the Config.in help text.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Cc: Sergey Kostanbaev <sergey.kostanbaev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's required in some 32-bit architectures for the extended (64-bit)
atomic operations, like __sync_add_and_fetch_8.
These arches are at least: i386, mips & mipsel.
Target size growth is ~15 KiB for ARM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
/home/br/br3/output/host/usr/lib/gcc/i586-buildroot-linux-uclibc/4.8.4/../../../../i586-buildroot-linux-uclibc/bin/ld: cannot find -ldl
using this defconfig
BR2_STATIC_LIBS=y
BR2_PACKAGE_OPENSSL=y
BR2_PACKAGE_OPENSSL_BIN=y
Quoting PROBLEMS:
"We don't have framework to associate -ldl with no-dso, therefore the only
way is to edit Makefile right after ./config no-dso and remove -ldl from
EX_LIBS line."
To not make the build procedure more complicated disable static building of
bin/openssl.
[Thomas: add corresponding kconfig comment.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ejabberdctl start returns immediately even if ejabberd is not ready
yet. Add a call to ejabberdctl started just after to wait until the
status says ejabberd is up and running.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
By default, ejabberd saves the mnesia database into /var/lib/ejabberd.
Otherwise, one might want to change this location (e.g., if /var/lib is
read-only). Add an option in the init script to offer this possibility.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
ejabberd.mk creates an ejabberd user but the init script was starting
the xmpp server as root user. This patch fixes it by invoking
ejabberctl from a "su ejabberd -c" command.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The existing u-boot patch option only allowed directories to be
specified. This adds support for URLs using similar code as found
in linux/linux.mk. Local files are also handled now.
This change is useful for Intel Edison support, so that Intel's u-boot
patch can be downloaded rather than stored in the Buildroot source tree.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
remove 0001-include.patch, applied upstream
added another patch from upstream to fix compilation with xserver 1.17
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
lnx_kbd.c: In function 'OpenKeyboard':
lnx_kbd.c:194:8: error: implicit declaration of function 'getpgid' [-Werror=implicit-function-declaration]
rc = tcsetpgrp(pInfo->fd, getpgid(0));
^
lnx_kbd.c:194:8: warning: nested extern declaration of 'getpgid' [-Wnested-externs]
cc1: some warnings being treated as errors
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using this defconfig
BR2_x86_pentium4=y
BR2_COMPILER_PARANOID_UNSAFE_PATH=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-i386-pentium4-full-2015.02.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_HEADERS_3_2=y
BR2_TOOLCHAIN_EXTERNAL_INET_IPV6=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_INET_RPC=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XLIB_LIBICE=y
build would fail without this patch:
checking for ICE... configure: error: in `/home/br/buildroot/output/build/xlib_libICE-1.0.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables ICE_CFLAGS
and ICE_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
To get pkg-config, see <http://pkg-config.freedesktop.org/>.
See `config.log' for more details
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some systems (e.g. Fedora 20), the build breaks when parsing include
directives in our /etc/ld.so.conf, with error messages as thus:
/sbin/ldconfig: need absolute file name for configuration file
when using -r
So, enforce the path to the ld.so.conf file to point to our own, in the
target/ directory.
Reported-by: Al West <al.west@v-nova.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to version 2015.04:
* Enable optional support for FIT Signature Verification
* Remove patch 0002-nostrip, it's upstream
* Add musl patch
* Add hash file
This patch supersedes "package/uboot-tools: bump to version 2015.01"
http://patchwork.ozlabs.org/patch/440396/
[Thomas:
- Rewrap Config.in help text.
- Move the paragraph about potential license compatibility issue
from Config.in.host to Config.in, since it's really on the target
package that such issues can be a problem.
- Use += instead of = when adding the dependency on openssl, so that
if other dependencies get added later, we don't overwrite them
mistakenly.]
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The first dependency of these targets is
$(BUILD_DIR)/buildroot-config/*conf
so the $(BUILD_DIR)/buildroot-config directory certainly exists.
Reported-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the canfestival package downloads a archive generated by the
remote Mercurial server.
This has the unfortuante side-effect of downloading an archive name just
after the revision string, without the package name in it. So, users do
have this archive in their BR2_DL_DIR: 7740ac6fdedc.tar.bz2
Switch to doing an hg clone to download canfestival, so we end up with a
properly named archive. Also expand the hash to the full-lenght hash
rather than the shorten one used when asking the remote server to
generate the archive.
[Thomas: fix typo in commit log.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-1351 - OPCache: Use After Free
CVE-2015-1352 - Postgres: Null pointer dereference
And others with no CVE assigned yet.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Use a custom kernel config to avoid the caveat of a huge debug-enabled
one.
And also reduce defconfig options to avoid bloat.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch kernel config to ext4, simplify to reduce bloat.
Adjust invocation to keep the framebuffer window for graphics testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Switch to DTB (mandatory).
And adjust invocation to use dtb and add a little more RAM for testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch to kernel 4.0.
Remove redudant/pointless kernel options to reduce bloat.
Switch from smc9111 to rtl8139 for networking because of issues.
Enable evdev support for better x11 testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Normally libsanitizer handles the different functionalities gracefully for
each architecture, but it doesn't seem to be the case for SPARC.
Since in general it doesn't support anything for SPARC just disable it.
Fixes bug #7951.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add hash file and remove the m4 directory creation from the monit.mk
which is now in the source tree.
[Thomas: as suggested by Baruch, keep only upstream sha256 hash.]
Signed-off-by: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
show-targets is only used currently by the graph-depends script, which
already recurses into the dependencies of the selected packages to
build the dependency graph. Therefore, dumping the contents of
$(PACKAGES) and $(ROOTFS_TARGETS) is sufficient: $(HOST_DEPS) and
$(TARGET_HOST_DEPS) will contain packages that are dependencies of
packages already listed in $(PACKAGES), which graph-depends will
discover by itself.
This allows to remove one more usage of $(HOST_DEPS) and
$(TARGET_HOST_DEPS), which is one more step towards their removal.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit changes the implementation of the global 'legal-info'
target to use the newly introduced per-package <pkg>-all-legal-info
target. This allows to avoid using the $(TARGET_HOST_DEPS) and
$(HOST_DEPS) variables that we are trying to remove.
It is worth mentionning that this commit might change the output of
'make legal-info' by making it more correct than it was. With the
existing implementations, we could be missing packages if they were
host packages, or target packages not properly selected in terms of
Config.in dependencies, and with a more than a two-level deep
dependency from a target package properly selected at the Config.in
level. This is because our previous logic was simply taking all
packages in the "TARGETS" (now called "PACKAGES") variable, which are
only the target packages explicitly selected in the .config file, and
doing a two-level deep recursion in the dependencies.
With this commit, we switch legal-info to use proper make-based
dependencies, so we no longer have the limitations we used to
have. For this reason, the output of 'make legal-info' after this
patch may contain *more* entries than before this patch, but it is
really because it is now correct.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The logic for creating most of the filesystem images requires a
certain number of host packages to be built. However, those packages
are not currently listed in the global PACKAGES variables, and they
are not dependencies of any other package listed in the PACKAGES
variable.
While it does not have any practical implications, it makes sense to
have those packages listed in the global PACKAGES variable, which this
commit implements.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
For clarity, this commit renames the TARGETS variable to the more
meaningful PACKAGES variable. Indeed, only packages (handled by one of
the package infrastructures) should be listed in this variable, and
not other random non-package targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The main Makefile was declaring a subset of the per-package targets as
being PHONY, but not all of them. Now that the pkg-generic package
infrastructure is taking care of that in a much more systematic
fashion, this commit gets rid of the unneeded code from the main
Makefile.
[Thomas: re-add list-defconfigs to the list of PHONY targets, as
noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit improves the filesystem handling code to declare its
various targets as PHONY when appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Just like the previous commit did for the pkg-generic infrastructure,
this commit improves the pkg-kconfig infrastructure to declare its
custom <pkg>-<something> targets as PHONY.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fixes (no CVEs assigned yet):
* integer overflow in the DN decoder src/dn.c (append_quoted,
append_atv)
* integer overflow in the BER decoder src/ber-decoder.c (ber_decoder_s)
* denial of service due to stack overflow in src/ber-decoder.c
(push_decoder_state, pop_decoder_state)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FreeImage is an Open Source library project for developers who would like to
support popular graphics image formats like PNG, BMP, JPEG, TIFF and others as
needed by today's multimedia applications.
See: http://freeimage.sourceforge.net
[Thomas:
- add hash file
- add dependency on !BR2_STATIC_LIBS, since the build system of
libfreeimage always tries to build a shared library.]
Signed-off-by: Rémi Rérolle <remi.rerolle@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The package infrastructure macros have a long time ago been renamed
from GENTARGETS, AUTOTARGETS to generic-package and
autotools-package. However, one comment in pkg-utils.mk keeps a
reference to these *TARGETS macros. This commit updates this comment
to match the new name of these macros.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
buildroot references powerpc64 little endian as "powerpc64le" and not
"powerpc64el". The typo in the supported architectures list caused this
package to be unavailable for powerpc64 little endian.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
buildroot references powerpc64 little endian as "powerpc64le" and not
"powerpc64el". The typo in the supported architectures list caused this
package to be unavailable for powerpc64 little endian.
Signed-off-by: Erico Nunes <erico.nunes@datacom.ind.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Due to some changes in libsigrok API sigrok-cli commit must be
updated as well after bumping libsigrok hash.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Several patches fixing issues and adding new features to baylibre-acme
driver have been merged with upstream libsigrok.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Doxygen is required to generate xml files required by libsigrokcxx
build system.
[Thomas: add host-python (or host-python3) to the dependencies when
building the C++ bindings for libsigrok, since a Python interpreter >=
2.7 is needed at build time.]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Host package only.
[Thomas:
- add missing dependencies on host-flex and host-bison
- add $(HOST_MAKE_ENV) to the configure, build and install steps, to
make sure that the doxygen build system can find flex and bison.]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In 8a46d4bf1f the randpackageconfig and allpackageyesconfig were
extended with disabling all the legacy options, otherwise the resulting
config couldn't be built. However, that didn't work for randconfig and
allyesconfig.
This commit reverts 8a46d4bf1f and replaces it with a different
approach: skipping of the legacy config options is passed explicitly
through the environment variable SKIP_LEGACY, which forces
BR2_SKIP_LEGACY to y. The new option BR2_SKIP_LEGACY completely
disables the legacy handling, which effectively removes all the legacy
options from the .config.
However, in that case no values are set for the legacy options so a
subsequent oldconfig will query them. Therefore, run an additional
olddefconfig.
[Peter: fix s/BR2_LEGACY/SKIP_LEGACY/ typo]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: do not rely on a user-visible option, works
perfectly well with only blind options set from the environment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
botan uses a non-autotools build system. We currently don't pass any
--prefix=/usr, and by default the prefix is set to /usr/local. This
doesn't cause a lot of visible issues because at install time, we pass
DESTDIR=$(TARGET_DIR)/usr (the build system doesn't make the
difference between DESTDIR and prefix).
However, the generated pkg-config .pc file is wrong, as it contains
prefix=/usr/local instead of prefix=/usr, which doesn't match where
the botan library and headers are installed. By passing --prefix=/usr,
we make sure that the .pc file is in line with where botan is
installed.
Fixes bug #7760
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DES is long dead, it is insecure as hell, and virtually all known
crypt(3) implementations now all support at least md5.
Besides, the character-space of DES-encoded passwords are a sub-set
of the character-space for a clear-text password, so we can't easily
differentiate between the two. Since we're going to change the root
password prompt to support setting encoded passwords (as well as
clear-text passwords), we can't keep DES or we'd be unable to decide
whether we'd need to encode the password or not.
Remove DES encoding altogether (and add a legacy entry). The default is
still md5, and thus there's no backward-compatibility 'select' to add.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Lorenzo Catucci <lorenzo@sancho.ccd.uniroma2.it>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While most of the Qt5 components indeed seem to be under LGPLv2.1 with
exception, or LGPLv3 or GPLv2, the qt5multimedia and qt5xmlpatterns
components only carry the LGPLv2.1 and LGPLv3 license files, and not
the GPLv2 license file. So one can safely assume that the GPLv2 option
is not available for those components, and this commit adjusts the
<pkg>_LICENSE and <pkg>_LICENSE_FILES variables accordingly.
Fixes:
http://autobuild.buildroot.org/results/c62/c62eef5e5b8add138cdab34e64103d974d0a510b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Bernd Kuhls <bernd.kuhls@t-online.de>
It makes no sense to have variables that are only used in one place
(PCIUTILS_MAKE_OPTS) for different build conditions.
Just make them add-up to MAKE_OPTS and move the fixed definition up.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Curently, all three linux extensions follow the same layout:
- test if the extension is enabled
- add itself to linux' patch-dependencies
- declare a macro, added as the pre-patch hook
Except for the macro, all can be commonalised.
Add a simple infrastructure for that:
- extensions declare themselves in the list of extensions
- extensions define their macro
- the infra adds them to the patch-dependencies and pre-patch
hooks as appropriate
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the move to the kconfig-package infra, linux extensions are
broken.
In our linux package, extensions are applied as pre-patch hooks.
Before the kconfig-package infra, we had custom rules for the
linux-*config targets, which were of the form:
linux-menuconfig: linux-configure
$(MAKE) -C $(LINUX_DIR) menuconfig
This caused the linux tree to be fully configured before running the
configurators, and thus linux dependencies were entirely fullfilled, and
extensions were properly applied.
Since we migrated (in dff25ea), the kconfig-package infra introduces a
(hidden, internal) intermediate step 'kconfig-fixup' and decorelates the
kconfig-part of the configuration from the actual package-part of the
configuration:
linux-configure -------> kconfig-fixup --> .config --> $(LINUX_CONFIG_FILE)
/
linux-menuconfig --'
As thus, this (very useful!) use-case breaks (starting from a clean
Buildroot tree):
make menuconfig
-> enable a kernel and at least one extension
-> save and exit
make linux-menuconfig
-> extensions are not available
Fix that by using the newly-introduced patch-dependencies, so that
extensions are available before we try to patch the linux kernel.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages need to vampirise files from one or more other packages.
This is the case, for example, of the Linux kernel and its /extensions/.
Add a new type of dependencies, that are guaranteed to be extracted and
patched before a package is patched.
[Thomas: remove <pkg>-show-build-depends and <pkg>-show-patch-depends,
since they don't seem to really be necessary and very useful.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This series optimizes most time-consuming algorithms and data structures
in the xtensa link-time relaxation code, leaving relaxation logic intact.
Speedup linking typical linux kernel is ~8 times (1 minute instead of 8),
pathological cases (linking objects partially linked without relaxation)
are handled ~60 times faster (1 minute instead of an hour).
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This definition of HOSTFC is completely wrong.
"$(HOSTLD)" should be "$(HOSTFC)". Also, "echo" always succeeds, so
"which g77 || type -p g77 || echo gfortran" is never run.
Anyway, HOSTFC is most likely set to "/use/bin/ld" and nobody has
complained about it before me, so I guess it is not used at all.
At least grepping HOSTFC, FC_FOR_BUILD did not hit any packages.
Drop HOSTFC and FC_FOR_BUILD.
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 9863553fe8 ("packages: all
salute the passing of avr32"), the dependency on !BR2_avr32 was
removed, but not the comment above it. So now, the comment seems to
apply to a line selecting some library, which doesn't make sense. This
commit gets rid of the unneeded and confusing comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit 9863553fe8 ("packages: all
salute the passing of avr32"), the dependency on !BR2_avr32 was
removed, but not the comment above it which explained why radvd would
not build on AVR32. So now, we have the impression that the comment
applies to the "select BR2_PACKAGE_FLEX" line, which doesn't make
sense.
Therefore, this commit gets rid of the unneeded and confusing comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix issues noticed by Arnout:
- Rewrap the linux/Config.in paragraph
- Revert the "is a toolchain dependency" -> "has a toolchain
dependency" change from pkg-generic.mk, as the original was
correct.]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When a package is not enabled, we need not check that it provides
a .config/defconfig file.
So far, all our pkg-kconfig packages unconditionally set their
_KCONFIG_FILE, even to an empty value. But some packages (e.g.
at91bootstrap3) wanted to set it only when enabled, and broke.
So, only do the check when the package is enabled.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It looks like version 23c76b7 of Raspberry kernel does not exist
anymore:
$ git clone https://github.com/raspberrypi/linux.git
[...]
$ cd linux
$ git co 23c76b7f608e51258c6fca02aebeb5d588583149
fatal: reference is not a tree: 23c76b7f608e51258c6fca02aebeb5d588583149
Replace it by latest version of 3.19 branch.
[Thomas: tweak commit log.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-1379 - signal handler implementations are not async-signal-safe
and can cause crash or freeze of socat processes.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a Zend OPcache option and tweak the build system into being
cross-compile friendly.
The OPcache extension allows for a neat intermediate bytecode cache in
memory to avoid reinterpreting/recompiling php scripts on multiple runs.
Make it an option since this takes up valuable RAM.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Convert patches from pure configure ones to *.m4/configure.in cleanness.
This allows us to AUTORECONF (well, not quite, but close).
Even though upstream will probably not accept them it's the right way.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Enable connmark and forecast plugins when iptables is selected.
And always enable the led plugin, though it's not new to 5.3.0.
[Thomas: also update hash file.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It requires doxygen to generate the C++ bindings, which doesn't have a
package in Buildroot. Until this gets resolved, mark libsigrokcxx and
its reverse dependency pulseview as broken to avoid build failures in
the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- add explicit --with-ssl
- remove comment above openssl condition, as it is obvious what is
happening.]
Signed-off-by: Karoly Kasza <kaszak@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The GNU make's origin function know undefined variable well,
so the outer ifdef/endif conditional checking is unneeded.
>From `info make` documentation, origin will return
`undefined'
if VARIABLE was never defined.
`command line'
if VARIABLE was defined on the command line.
...
Therefore, $(origin V) will get a value anyway, killing ifdef/endif
is viable and safe.
Furthermore, I've checked the minimal requirements from the top
Makefile is GNU make 3.81, and that version of GNU make has support
of origin function well already, so now it's safe to kill the outer
conditional checking, without upgrading the minimal requirements.
Signed-off-by: Cheng Renquan <crq@kernel.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[ Commit description is borrowed from Linux Kernel
(commit b8b0618cf6fa) and adjusted for Buildroot ]
Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS became ineffective in commit a5ce7590c4
(package/rpi-firmware: bump version), and was removed in commit 4e92ffdc47
(rpi-firmware: remove no longer used BR2_PACKAGE_RPI_FIRMWARE_INSTALL_DTBS).
Remove it from the Pi configs.
Also, remove the now obsolete comment in these config files.
Cc: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some (silly?) reason, the kconfig-package infra always wants
<pkg>_KCONFIG_FILE to be defined. So let's do like barebox does: use a
temporary AT91BOOTSTRAP3_SOURCE_CONFIG variable, and assign it to
AT91BOOTSTRAP3_KCONFIG_FILE. This way, the latter is always defined,
even if to the empty value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In at91bootstrap3, defconfig files are spread out in various
sub-directories, so we can't easily construct the path to those
defconfig files.
As it turns out, there are no two defconfig files named the same; they
all contain at least the board name, plus some extra info. And there is
always only one directory depth below board/ where all defconfig files
are to be found.
Also, at91bootstrap3's own Makefile relies on this single-match as it
runs a 'find' command to locate the defconfig file.
So, even though we do not know the path to the defconfig file, we can
construct a shell-glob quite easily (in the hope that there will never
be more than one directory depth).
Signed-off-by: Mauro Condarelli <mc5686@mclink.it>
[yann.morin.1998@free.fr:
- remove custom _CONFIGURE_CMDS, handled by pkg-kconfig (Thomas)
- remove redundant intermediate variable
- fix using internal defconfig files
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When downloading from a repository, we explicitly pass no hash file,
because we can't check hashes in that case.
However, we're still printing a message that there is a missign hash
file.
Beside being a bit annoying (since we can't do anything about it), it
may also be wrong, especially for packages for which we support multiple
versions, with some being downloaded via a git clone and others as
tarballs.
Just print no warning when the path to the hash file is empty.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we bumped FreeRDP, vlc no longer builds:
http://autobuild.buildroot.org/results/8d9/8d91e3ffccee753135e9d0faa2b1ae00875606c9/http://autobuild.buildroot.org/results/e1f/e1f6526d1a4ac2c95998793efea2188faa708e29/
Fix that by bumping vlc to 2.2.0, as vlc-2.1.6will never support this
new version of FreeRDP.
Add dependency on kernel headers >= 3.7, because it needs DTV_STREAM_ID.
I stumbled on this whith a toolchain using headers forom 3.5, but only
tested with a toolchain with headers from 3.9, so there might be other
dependencies I missed on 3.8 or even 3.9. Let's wait for build failures
to find out...
There are quite a bunch of new --enable/disable options, so I've tried
to catter for all the changes. Most notably, there's no longer a flag to
enable.disable GL, it is now always auto-detected. Also, I've added
flags for GLES which we were missing so far, so we had to rely on the
build order to detect those dependencies (which was OK becasue libgles
sorts before vlc). Finally, SVG now has two flags to enable different
parts of SVG support, but they both depend on the same library, so
enable both.
There are new support for some features, like acceleration on RPI, but
that can well wait for further patches when someone is interested ;-) ,
vdpau HW accelearation on NVidia (we have a package for that, but not
able to test, so not added), vpx support (we have a libvpx package,
but I had no time to test), x262 and x265 support for which we're
currently lacking the packaging, and a few other exotic stuff...
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Clean up system directories by making samba conform to FHS and by using
subdirectories e.g. /var/log/samba and /var/run/samba instead of
/var/log and /var/run.
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit improves the pkg-generic package infrastructure so that it
declares all the <pkg>-<something> targets as PHONY, which they
actually are.
[Thomas:
- add some missing phony targets, noticed by Yann E. Morin;
- put one target per line, order alphabetically. Makes it easier to
spot missing targets.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to implement the global 'make source', 'make legal-info' and
'make external-deps' using the package infrastructure logic, this
commit introduces a set of per-package targets that allow to
recursively run the source/legal-info/external-deps actions on the
dependencies of a given package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The global .PHONY specification in the main Makefile is describing a
number of directory targets as being PHONY, which doesn't make much
sense. PHONY targets are targets that do not exist on the filesystem,
and which make should always consider as not being up-to-date, so that
the commands associated to these targets are always executed by make
when the command is invoked, even if a file with the same name exists
on the filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit implements a new <pkg>-external-deps target in the
pkg-generic package infrastructure. This target simply displays the
list of file names that are needed for <pkg> to build (source tarball,
patches, extra downloads).
In the case of the usage of <pkg>_OVERRIDE_SRCDIR, the path to the
overriden source directory is displayed, prepended by file://. This
matches what the code is currently doing in .stamp_rsync_sourced.
This new target is not currently being used in this commit, but
followup commits will make use of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The Buildroot manual is currently wrong when describing how patches
are applied: it says that <packagename>-*.patch is applied, and that
<packagename>-<seq>-*.patch is the recommended name for patches. This
is incorrect, since we're now using just <seq>-*.patch. This commit
adjusts the documentation accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Several packages have some logic to apply custom patches that existed
before the BR2_GLOBAL_PATCH_DIR mechanism: at91bootstrap,
at91bootstrap3, barebox, uboot and linux. Currently, the logic of
those packages to apply custom patches is to match
<package-name>-*.patch, which is not consistent with what we've done
for patches stored in the package directory, and for patches stored in
BR2_GLOBAL_PATCH_DIR: in such cases, we simply apply *.patch.
Therefore, for consistency reasons, this commit changes these packages
to also apply *.patch.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Fix a bunch of deficiencies:
- 'debian/copyright' does not exist.
- gnuefi is not GPLv2+. Only one AArch64 file has GPLv2+ headers,
all others have BSD-3c
- efilib is BSD-2c
Change the licensing information to include BSD-3c for the gnuefi parts,
and keep refernce to GPLv2+ as the Main README.gnuefi references it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit modifies the last libtirpc patch to be a Git formatted
patch, i.e that can easily be imported using 'git am'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Otherwise, the configure script fails with "Required program
pkg-config is missing".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove 003-allow-flags-from-environment.patch, and pass
TARGET_CONFIGURE_OPTS in the environment instead.
- convert the patches to Git formatted patches.
- use the v1.18 tag instead of a commit hash.
- do not pass TARGET_CONFIGURE_OPTS at install time, this is not
needed.]
Signed-off-by: Steve James <ste@junkomatic.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The tovid suite, also known simply as tovid, is a collection of shell
and Python scripts for creating DVDs and (S)VCDs. It is pronounced
"to vid" (because it converts to video disc formats).
[Thomas:
- remove largefile dependency
- properly propagate mplayer and ffmpeg dependencies.
- fix license: it's GPLv2+, not GPLv2.]
Signed-off-by: Steve Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In order to allow other packages to easily select mplayer without
duplicating its complicated architecture dependencies, this commit
introduces a BR2_PACKAGE_MPLAYER_ARCH_SUPPORTS blind option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We use a manually specified custom version 3.19.2 of the linux kernel
for i.MX28, but linux-headers defaults to a 2.6.x family.
Select custom headers family 3.19.x explicitely, to repair
linux-headers "build".
Signed-off-by: Vincent Stehlé <vincent.stehle@laposte.net>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit tweaks the Makefile.in to not build and install example
applications.
[Thomas: improve commit log, rebase on top of latest master.]
Signed-off-by: Damien Lanson <damien@kal-host.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit bumps the version of xerces to 3.1.2, changes tarball to
.tar.xz, and adds a hash file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove dependency on SSP support by adding a patch that changes
the configure.ac script stack protector test to actually work.
- rewrap Config.in help text
- fix how BR2_USE_MMU is used when displaying the comment.
- fix the license, it's BSD-3c, not BSD-2c.
- bump to version 2.9.5.]
Signed-off-by: David Bachelart <david.bachelart@bbright.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
procps-ng configure.ac script uses PKG_CHECK_MODULES(), which needs
pkg-config. Until now, it wasn't mandatory since for the ncurses check
it tries PKG_CHECK_MODULES() and then falls back to AC_CHECK_LIB(),
but for the upcoming systemd support, pkg-config is really needed.
Since pkg-config is used both for the ncurses and systemd checks, we
make it a mandatory dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Distro toolchains, i.ie. toolchains coing with distributions, will
almost invariably be unsuitable for use with Buildroot:
- they are mostly non-relocatable;
- their sysroot is tainted with a lot of extra libraries.
Especially, the toolchains coming with Ubuntu (really, all the Debian
familly of distros) are configured with --sysroot=/ which makes them
non-relocatable, and they already contain quite some libraries that
conflict (in any combination of version, API or ABI) with what Buildroot
wants to build (i.e. extra libraries, some not even present in
Buildroot...) but also their mere preence when Buildroot does not expect
them to be already built (so that a package would enable features when
it should not).
So, try to detect those toolchains and black-list them; inform the user
that the toolchain is unusable for the reasons mentioned above.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- rename to open-plc-utils to match upstream name.
- fix Config.in to use tabs instead of spaces
- remove 'default n' line
- add dependency on BR2_USE_MMU
- bump to a more recent upstream commit
- remove no longer needed openplc-0002-Remove-vfprintf-call.patch
- rename patch to the proper naming convention
- specify <pkg>_LICENSE_FILES
- pass CROSS= instead of CC=
- do not pass CC= at install time.]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
'make list-defconfigs' is probably one of the more useful things
to get started quickly.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the BR developer meeting at FOSDEM, the README should be
very short and instead refer to other documentation: the manual, the
website, the mailing list, the IRC channel.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The documentation of the package-specific targets is heavily inspired by
the earlier patch by Thomas Petazzoni [1], but the <pkg>-install*
targets were left out since they're not useful for the developer IMHO.
The *-menuconfig target's help text is moved to the package-specific
targets.
[1] http://patchwork.ozlabs.org/patch/433692
[Thomas: remove double <pkg>-graph-depends help.]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed in the FOSDEM2015 BR developer meeting, the output of
'make help' is too long for comfortable reading. To shorten it, split
off the list of defconfigs in a new target, 'list-defconfigs'.
Declare the new target as phony.
Add 'list-defconfigs' to the documentation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Add BR2_USE_MMU dependency, since fork() is used.
- Put <pkg>_SOURCE next to <pkg>_VERSION and <pkg>_SITE.
- Improve comment about why autoreconf is needed.
- Change the location in menuconfig of the package, "Networking
applications" didn't seem like an appropriate location.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- adjust length of comment header in .mk file.
- fix comment in Config.in to match what's specific in the Buildroot
manual.
- fix <pkg>_LICENSE to 'Artistic-2.0'.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit also adds an optional dependency on openjpeg: if
--enable-openjpeg=none is not passed, poppler assumes openjpeg is
available.
[Thomas:
- add optional dependency on openjpeg instead of mandatory
dependency.
- remove --enable-xpdf-headers, since there was no justification for
it.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package is needed by Poppler.
[Thomas:
- fix download location, which was incorrect.
- add dependency on host-pkgconf, since the configure.ac script uses
PKG_CHECK_MODULES and we're doing an autoreconf.
- add optional dependencies on libpng, tiff and lcms2, so that they
are explicit instead of automatically detected.]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX28 Evaluation Kit (or EVK) is Freescale's evaluation board based on the
i.MX287 Applications Processor.
This defconfig is based on mainline u-boot and Linux kernel.
Also, we add an SD card creation script and documentation, shamelessly based on
the ones for i.MX5/6 by Luca Ceresoli.
[Arnout: fixate U-Boot and kernel (headers) versions]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Allow to generate u-boot.sd, Freescale i.MX28 SB format with a header for
booting from an SD card.
U-boot includes an mxsboot tool to generate this format, starting from
v2011.12.
See u-boot doc/README.mxs (or doc/README.mx28_common before 2013.07).
[Arnout:
- Wrap Config.in help text at 72 columns.
- Remove v from U-Boot version specifier.
- Refer to different README name before 2013.07.
- Depend on host-elftosb
- Add comment to clarify sb -> sd conversion.]
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Tested-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SL (Steam Locomotive) runs across your terminal when you type "sl" as
you meant to type "ls". It's just a joke command, and not useful at
all.
[Thomas:
- Change "depends on BR2_PACKAGE_NCURSES" to "select
BR2_PACKAGE_NCURSES".
- Rewrap Config.in help text.
- Remove comment in help text about the need to check dependencies,
there's nothing to be done really.
- Change the license from "Unclear" to "Custom".
- Use $(TARGET_CONFIGURE_OPTS instead of passing CC and CFLAGS
explicitly.
- Pass '-m 0755' when doing the $(INSTALL)
- Add ncurses to SL_DEPENDENCIES.]
Signed-off-by: Jens Rosenboom <j.rosenboom@x-ion.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
glib-networking wants to use the certificates bundle, not the individual
certificates.
Generating the bundle is usually done with update-ca-certificates, but
that does not support running out-of-tree.
Fortiunately, and as Gustavo put it, update-ca-certificates is jsut a
glorified 'cat'. It is supposed to be fed a config file stating which
certificate to add/remove to/from the bundle, otherwise nothing fancy
(Oh, yes, running hooks after updating the bundle).
Since we do not need any of this in Buidlroot, we jsut generate a bundle
with all certificates unconditionally.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package adds the userspace tools and daemons LIRC - Linux remote
control
[Thomas:
- rewrap Config.in help text, lines were too long. And do a bit of
rewording also.
- remove trailing whitespaces in Config.in.
- make sure Config.in is included from package/Config.in, otherwise
the package is not visible.
- use a full destination path when installing the sysv init script.
- add dependency on BR2_USE_MMU, since fork() is used.
- fix init script: use -n option to not daemonize since
start-stop-daemon is already doing that, use 'mkdir -p' and 'ln
-sf' to make the 'start' action re-executable.]
Signed-off-by: Rhys Williams <github@wilberforce.co.nz>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the user selects a custom toolchain to be downloaded, there's no
hash for that toolchain, so the download fails, now that hashes are
mandatory.
Fix that by simply exiting as if there was no error, until we have a
better fix...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, a 'make clean' leaves the graphs/ subdirectory in the
output directory. This commit defines a GRAPHS_DIR variable, used by
the different graph-generating targets, and which gets cleaned up in
the 'clean' target.
[Thomas: use the new GRAPHS_DIR variable in more places, as suggested
by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
At the time we introduced hashes, we did not want to be too harsh in the
beginning, and give people some time to adapt and accept the hashes. So
we so far only whined^Wwarned about a missing hash (when the .hash file
exists).
Some time has passed now, and people are still missing updating hashes
when bumping packages.
Let's make that warning a little bit more annoying...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Return different exit codes depending on the error that occured:
0: no error (hash file missing, or all hashes match)
1: unknown option
2: hash file exists, but at least one hash in error
3: hash file exists, but no hash for file to check
4: hash file exists, but at least one hash type unknown
This will be used in a later patch to decide whether the downloaded file
should be kept or removed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add support to explicitly state that an archive has no hash.
This can be used for archives downloaded from a repository, like a
git-clone or a subversion checkout, or using the github helper.
This will come in handy when we'll eventually make hashes mandatory as
soon as a .hash file exists: for some packages, like gcc, some versions
are downloaded as archives from upstream, while other versions may come
from a GitHub repository (via the github herlper).
In this case, a .hash file would exist, that contains hashes for the
downloaded tarballs, but archives downloaded from the repository would
not have a hash (since it is currently not possible to have reproducible
such archives). So, we'd need a way to explicitly state there is no
hash, on purpose, for those archives.
So, add 'none' as a new type of hash.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, specifying a hash file for our download wrapper is mandatory.
However, when we download a git, svn, bzr, hg or cvs tree, there's by
design no hash to check the download against.
Since we're going to have hash checking mandatory when a hash file
exists, this would break those downloads from a repository.
So, make specifying a hash file optional when calling our download
wrapper and bail out early from the check-hash script if no hash file is
specified.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't bump the softfp version, because there's still no newer release
(probably softfp will never be updated).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: David BARBION <david.barbion@ext.leroymerlin.fr>
[yann.morin.1998@free.fr:
- simplify by copying the full directory
- fix title
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes configure error due to missing c++
checking for library containing pthread_create... no
configure: error: libpthread is required but was not found
Quote from config.log:
configure:21552: checking for library containing pthread_create
configure:21583: false -o conftest -Os conftest.cpp -lintl >&5
[...]
ac_cv_env_CXX_set=set
ac_cv_env_CXX_value=false
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_PACKAGE_POWERTOP=y
Please note the number of .cpp files belonging to powertop
output/build/powertop-2.7$ find -iname *.cpp | wc -l
59
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
volk must be compiled with toolchain built with shared lib to avoid :
attempted static link of dynamic object `../lib/libvolk.so.0.0.0'
[Thomas:
- rebase after the non-largefile removal.
- comment must be "dynamic library" not "shared library".]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SABRE Board for Automotive Infotainment (SABRE Auto, a.k.a. SABRE-AI) is
Freescale's evaluation board based on the i.MX 6 ARM Cortex-A9 applications
processor.
Those defconfigs are an adaptation of freescale_imx6{q,dl}sabresd_defconfig for
SABRE Auto, and are thus based on Freescale "official" git repo on
git.freescale.com and SW release 3.10.17_1.0.0_ga.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Cc: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Gilles Talis <gilles.talis@gmail.com>
Cc: Peter Korsgaard <jacmet@sunsite.dk>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Gary Bisson <bisson.gary@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using CUDA with NVidia requires those two programs if one wants to use
more than one program doing CUDA at the same time.
This is only available on x86_64.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Al West <al.west@v-nova.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, nvidia-driver always installs the X.org driver, assuming this
is a requirement for all functionalities provided by nvidia-driver, thus
pulling in quite a bunch of X.org packages.
However, it is perfectly legit to be doing CUDA (and OpenCL) work
without the full X.org stack, and indeed the NVidia CUDA and OpenCL
libraries do not require the X.org stack.
Split the configuration so that it is posible to install the different
parts independently from each others, so that CUDA can be installed all
on its own.
Reported-by: Al West <al.west@v-nova.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Al West <al.west@v-nova.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Move all of the scattered fonts, icons, sound packs and themes into a
new category for them.
In preparation for the inclusion of more fonts.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noticed by Yann E. Morin in the review of
http://patchwork.ozlabs.org/patch/429533/, there was something fishy
in the jimtcl installation logic:
ln -s libjim.$(JIMTCL_LIB) $(STAGING_DIR)/usr/lib/libjim.so
where JIMTCL_LIB has the value 'a' for BR2_STATIC_LIBS=y builds. Which
means we're linking libjim.so to libjim.a. Not great.
This commit therefore reworks the installation logic of the jimtcl.mk
package to install the shared library when BR2_STATIC_LIBS is not set,
and the static library when BR2_STATIC_LIBS is enabled. The macro
JIMTCL_INSTALL_LIB now takes as argument where the library should be
installed, so that it can be used for both the target and staging
installations.
Note that we can only either build the shared library *or* the static
library with the jimtcl build system. There is no possibility of
building both.
Reported-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Switch from the ACL package example to RRDTOOL since ACL has no dual
(depends + select) dependencies any more and doesn't fit the example
scenario.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that largefile is mandatory remove support for non-lfs
tweaks/variables in the package infra and the gcc build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As discussed on the mailing list drop the non-largefile option for
toolchains.
The size delta is minimal and it just complicates package dependencies.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We currently only check that the Buildroot configuration matches what is
available in the toolchain.
Since we're going to remove the check for LFS and make it a mandatory
feature, we will lose the corresponding buildroot option, so we won't be
able to use check_uclibc_feature as-is.
Introduce a magic value passed as the buildroot option name to recognise
checks for mandatory uclibc options that do not have a corresponding
option in buildroot.
If the buildroot option name is empty then the check is against a
mandatory uclibc option.
If a mandatory uclibc option is missing we reject the toolchain as being
unusable by buildroot.
[Thomas: minor tweaks in comment, remove space instead of tab.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The category just contains gtk2-theme-hicolor... which is a duplicate of
hicolor-icon-theme, d'oh!
Remove it and select the only one via legacy.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes
../../../glamor/glamor_egl.c:603:25: error: unknown type name 'RRProviderPtr'
RRProviderPtr provider,
^
../../../glamor/glamor_egl.c:650:1: error: unknown type name 'dri3_screen_info_rec'
static dri3_screen_info_rec glamor_dri3_info = {
^
using this defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_INIT_NONE=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_PACKAGE_MESA3D=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_NOUVEAU=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_R600=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SVGA=y
BR2_PACKAGE_MESA3D_GALLIUM_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I915=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_I965=y
BR2_PACKAGE_MESA3D_DRI_DRIVER_RADEON=y
BR2_PACKAGE_MESA3D_OPENGL_EGL=y
BR2_PACKAGE_MESA3D_OPENGL_ES=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
BR2_PACKAGE_XDRIVER_XF86_VIDEO_INTEL=y
RRProviderPtr is defined in dri3/dri3.h, so make sure glamor is enabled only
if dri3 is enabled, too.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If the libdrm package is enabled, the system is built with an udev
provider and MESA3D_DRI_DRIVER is disabled this adds a --disable-libdrm
to configure options, but udev still requires libdrm and results in a
build failure since libdrm include paths aren't filled in (missing drm.h
include error).
So add --enable-libdrm for the udev scenario to counteract the previous
--disable-libdrm.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Commit "packages: indentation cleanup" broke the build of master.
This commit reverse the patch on just ccache package and fix that issue.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Old wget versions aren't very happy with https moves/alt names hence
complain when trying to download from said sites.
Since polarssl is now mbed tls and everything got renamed switch to the
new URL to avoid this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When it's not defined an automatic search is triggered, which can find
/usr/bin/llvm-config on distributions that include all development files
(like gentoo) and have desktop packages installed.
So point it towards the staging dir which is where it should live
eventually if/when we've got it to avoid header/include path polution
that otherwise leads to build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of manually using the DOWNLOAD macro (which should remain an
internal macro), this commit converts the Perl package to use
<pkg>_EXTRA_DOWNLOADS, now that it has been extended to allow full
URLs.
[Thomas: as suggested by Yann, keep comment explaining how we handle
perl-cross.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit updates the Buildroot manual for the variables used to
indicate where to download the source code from:
- It updates the description of <pkg>_SOURCE to make it clear that
Buildroot assume that the tarball is hosted at <pkg>_SITE.
- It updates the description of <pkg>_PATCH to indicate that not only
file names (assumed to be hosted at <pkg>_SITE) can be used, but
also full URLs. This allows to match with what the current code is
doing.
- It updates the description of <pkg>_EXTRA_DOWNLOADS to also
indicate that full URLs are now accepted, following the change made
in the previous commit.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The current logic for <pkg>_EXTRA_DOWNLOADS assumes that it is a list
of files, all hosted at <pkg>_SITE. However, just like for
<pkg>_PATCH, it may be useful to specify <pkg>_EXTRA_DOWNLOADS entries
that are hosted on a different site than the package <pkg>_SITE.
This commit implements this, by re-using the same logic as the one
used for <pkg>_PATCH.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In the .stamp_downloaded hook, the logic to decide whether or not to
display the "Downloading" message is treating the check of
<pkg>_SOURCE as a special case. But in fact, there is no real reason
to do so: the existing loop used for <pkg>_PATCH and
<pkg>_EXTRA_DOWNLOADS could work just as well.
This commit therefore refactors this piece of code, to have a single
loop checking <pkg>_SOURCE, <pkg>_PATCH and <pkg>_EXTRA_DOWNLOADS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The .stamp_downloaded target displays the "Downloading" message even
if there is really something to download. However, this logic only
checks for <pkg>_SOURCE and <pkg>_PATCH: it does not check if
something needs to be downloaded in <pkg>_EXTRA_DOWNLOADS.
This commit fixes that, which makes sure that the "Downloading"
message is displayed if one of the items in <pkg>_EXTRA_DOWNLOADS has
not yet been downloaded.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Even though the .stamp_downloaded target is executed for each package
being built, the pkg-generic infrastructure tries to not display the
"Downloading" message when there is in fact nothing to download.
Unfortunately, the logic was incorrect for the patch download: it
forgot the fact that <pkg>_PATCH can contain either file names (in
which case we assume the patch should be downloaded from <pkg>_SITE),
or full URLs. The latter case was not properly handled, as we were
checking if $(DL_DIR)/<full URL> existed, while we should be testing
if $(DL_DIR)/`basename <full URL>` exists.
This patch fixes that, which makes sure the "Downloading" message is
displayed only when necessary.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The linux package has a special handling of patches, with quite a bit
of legacy in it. A problem caused by this special handling is that the
linux package calls directly the DOWNLOAD_WGET macro, which means that
the package infrastructure isn't aware of which patches get
downloaded, and it prevents doing changes inside the package download
infrastructure.
This commit changes the handling of patches in the linux package in
the following way:
* The LINUX_PATCHES variable is kept as is: it lists all the patches
mentioned in the Config.in option BR2_LINUX_KERNEL_PATCH. This
option can contain http://, ftp://, https:// URLs, path to local
files or local directories.
This variable is *not* used by the generic package infrastructure,
so it is purely internal to the Linux package.
* The LINUX_PATCH variable is now filled in with the list of patches
that should be downloaded. It is derived from LINUX_PATCHES by
filtering the patches that have http://, ftp:// or https:// in
their path. Since <pkg>_PATCH is handled by the package
infrastructure, it means that those patches are now automatically
downloaded and applied by the package infrastructure.
* The LINUX_APPLY_PATCHES hook is renamed to
LINUX_APPLY_LOCAL_PATCHES, because it is now only responsible of
applying local patches: remote patches are handled by
LINUX_PATCH. The implementation of the hook is changed to filter
out the patches that have already taken care of by LINUX_PATCH, so
that we only iterate through the list of local patches or local
patch directories.
[Thomas: adjust comment in the code according to Yann comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cores older than v9 don't seem to have atomics so remove it.
Fixes a test build of pulseaudio for example.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- change upstream URL, project moved to github
- removed patches not needed anymore since project switched to autoconf
- add newly supported platforms to Config.in
[Thomas:
- remove hash file, since we're fetching from github now.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Although BINFMT_FLAT_SHARED is indeed a shared library format, it does
not support dynamic library loading with dlopen(). So for buildroot
purposes, BR2_STATIC_LIBS shouldn't be selected.
As it happens, the compiler options that are added for
BINFMT_FLAT_SHARED also make the compiler ignore the -static option, so
we can simply force BR2_STATIC_LIBS and things work out perfectly.
Therefore, remove the select of BR2_BINFMT_SUPPORTS_SHARED from
BINFMT_FLAT_SHARED, which in turn makes sure that BR2_STATIC_LIBS is
selected.
[Arnout: rewrite commit message, add explanatory comment]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Sysdig is open source, system-level exploration: capture system state
and activity from a running Linux instance, then save, filter and
analyze.
[Thomas:
- remove unneeded 0001-makefile-driver-compile-options.patch, instead
pass KERNELDIR in the make options when building the driver, and
pass the contents of $(LINUX_MAKE_FLAGS) directly.
- use $(SYSDIG_BUILDDIR) instead of $(@D)/buildroot-build, so that
the package does not depend on the package infra using specifically
buildroot-build as the build subdirectory.
- use $(MAKE) -C <foo> instead of cd <foo>; $(MAKE).
- rename 0002 patch to 0001, since the 0001 patch is removed.]
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Reviewed-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Tested-by: Ryan Barnett <ryan.barnett@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version comes with a new build system based on autoconf/automake,
so we switch from generic-package to autotools-package. However, since
the tarball does not contain a pre-generated configure script, we have
to set LOGROTATE_AUTORECONF = YES.
[Thomas:
- add comment explaining why AUTORECONF = YES is needed
- expand commit log
- use --without/--with instead of --with=yes/--with=no
- fix indentation in the ACL condition]
Signed-off-by: Benoît Thébaudeau <benoit.thebaudeau.dev@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Version 0.10.38 upgrades OpenSSL to version 1.0.1m, which includes fixes for
several CVEs:
- CVE-2015-0204
- CVE-2015-0286
- CVE-2015-0287
- CVE-2015-0289
- CVE-2015-0292
- CVE-2015-0293
- CVE-2015-0209
- CVE-2015-0288
Version 0.10.37 comes with a fix for CVE-2015-0278.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reword the help text and get ride of the supported kernel
version list which is outdated since Xenomai version bump.
[Thomas: rewrap text to the appropriate length, fix some typos.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a missing reverse depency from the on2-8170-libs package.
Fixes warning:
warning: (BR2_PACKAGE_GST_PLUGIN_X170) selects BR2_PACKAGE_ON2_8170_LIBS which has unmet direct dependencies (BR2_arm926t && BR2_TOOLCHAIN_USES_GLIBC && BR2_LINUX_KERNEL)
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that 7.9 was added and 7.8.x is default we don't want to have a
dozen versions so mark it as deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add gdb version 7.9, and adjust the tarball logic to default to .tar.xz
(for 7.8 & 7.9), fall back to .tar.bz2 for 7.7.x and leave the rest
alone.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Boost C++ library is already selected in the Config.in but it was
missing in the yaml-cpp.mk file.
Fix build failure:
CMake Error at /home/tetsuya/buildroot/br/output/host/usr/share/cmake-3.1/Modules/FindBoost.cmake:1182 (message):
Unable to find the requested Boost libraries.
<snip>
make: *** [/home/tetsuya/buildroot/br/output/build/yaml-cpp-0.5.1/.stamp_configured] Error 1
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Quote the TARGET_CC variable, otherwise, if ccache is enabled:
[...] make CC=$TARGET_CC [...]
is expanded to e.g.
[...] make CC=ccache gcc [...]
The build succeeds with "make[2]: Nothing to be done for '[...]gcc'".
and the program is compiled at "make install" time, with the default
host compiler, resulting in a binary that does not run on the target.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was kept for the internal blackfin toolchain which has been removed
since because of lack of maintenance and testing.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using 'AC_EGREP_CPP(yes' without restraining the pattern always return
true if it runs from a path containing the string 'yes'.
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The SuperH architecture is supported by the musl libc since some time
now, so let's enable it.
Tested via qemu_sh4_r2d_defconfig.
Signed-off-by: Lionel Orry <lionel.orry@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The i.MX31 Product Development Kit (or PDK) is Freescale development board
based on the i.MX31 application processor.
This defconfig is based on mainline kernel v3.15.10, and is aimed at a PDK in
"3 stack" configuration, with CPU engine board, personality board and debug
board.
Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LZMA support is provided by xz, since liblzma is long dead.
Contrary to zlib, liblzma uses pkg-config, so we do not need to add the
full path to libzma.
Reported-by: vdm on IRC
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update the .hash file because the .tar.gz file has been regenerated.
The contents was not changed so just updating the .hash file is fine.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There's no way to disable getsubopt in uClibc 0.9.33.2: either GNU or
SUSv3 getsubopt is always built.
Properly exclude SUSv3 getsubopt implementation when GNU getopt is
selected.
Exclude GNU getsubopt when SUSv3 getopt is selected. Honor getopt_long
configuration.
This brings UCLIBC_HAS_GNU_GETOPT, UCLIBC_HAS_GNU_GETSUBOPT and
UCLIBC_HAS_GETOPT_LONG handling in sync with uClibc and uClibc-ng tips.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Note that, if both libftdi and libftdi1 are available, openocd will
prefer libftdi1, so does Buildroot. ;-)
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Avrdude supports both libftdi and libftdi1.
Because libftdi is already an optional dependency, this patch adds
libftdi1 as optional dependency as well, but privileges libftdi1 over
libftdi (accdording to what is done in avrdude's configure script).
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Fix dependency on C++, it should use BR2_INSTALL_LIBSTDCPP and not
BR2_TOOLCHAIN_BUILDROOT_CXX.
- Fix comment dependency, there should be an || between all the
toolchain dependencies. Also fix the dependency on Qt5 for the
comment, which was in the wrong way: the comment was displayed
only when Qt5 was disabled.
- Use -DDISABLE_WERROR=TRUE instead of -DDISABLE_WERROR=y, since
TRUE/FALSE are normally the accepted values for CMake options.]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Special characters in files or directories in the rootfs can cause
problems when stripping files. For example "target/some song.mp3"
gets treated as two entries. "target/some" and "song.mp3" are both
passed to $(STRIPCMD). This then errors saying files don't exist.
Additionally a ' and possibly other special characters in a file path
causes xargs to give the error: "xargs: unmatched single quote; by
default quotes are special to xargs unless you use the -0
option". This also has the effect of removing this entry and further
entries from the list of files to strip. This can be demonstrated by
having a test directory with the files: "cat" "rabbit's"
"elephant". then running the command: "find -name "*" -print | xargs"
To fix this we pass -print0 to find which seperates entries with a
NULL character, and we pass -0 to xargs to tell it to only use NULL
characters as the deliminator.
Signed-off-by: Andrew Parlane <andrewp@carallon.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we don't support the internal blackfin toolchain any more it
makes no sense to have this enabled.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we don't support the internal blackfin toolchain any more
remove unnecessary bits, conditionals and tweaks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove mandatory libpciaccess and numactl dependencies. Those
dependencies are optional.
- add dependency on threads.
- use a HWLOC_VERSION_MAJOR variable to avoid repeating the major
version number in HWLOC_SITE.
- explicitly disable features we don't support.
- explicitly enable/disable pci and numa support, depending on the
availability of the corresponding dependencies.
- add dependency on host-pkgconf, since pkg-config can be used by
hwloc configure script.]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In addition to building programs, numactl also builds a library and
its corresponding header files, which can be used by other programs
such as hwloc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Unlike other systemd services, these are not enabled by default, as the
most likely configuration is that they will be managed by something like
NetworkManager.
Signed-off-by: Mike Williams <mike@mikebwilliams.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
BR2_UCLIBC_VERSION_XTENSA_GIT and BR2_UCLIBC_VERSION_SNAPSHOT select
BR2_UCLIBC_SUPPORTS_* instead of new BR2_UCLIBC_VERSION_SUPPORTS_*.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- fix commit title
- powertop wants libintl unconditionally, so make sure
BR2_PACKAGE_GETTEXT is selected when BR2_NEEDS_GETTEXT is set, and
add gettext to the dependencies.
- add missing comment about thread dependency.
- add missing dependency on host-pkgconf, without which powertop
cannot find libnl.
- patch src/Makefile.am to not pass -fstack-protector, which fails
to build if the toolchain does not have SSP support.
- rename patch powertop-autotune.patch to confirm to the patch
naming convention.]
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes CVE-2014-4040: A local attacker could obtain sensitive information from
the generated archive such as plain text passwords.
Yes, version 1.2.24 seems to be newer than 1.4, which is equivalent to 1.2.20.
Also, switch from git clone to tarball download , and add a .hash file.
The configure script seems to misdetect stack smashing protection support in
the toolchain. gcc accepts -fstack_protector_all, but the linker complains:
"ld: cannot find -lssp".
Cc: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-0231 - Use After Free Vulnerability in unserialize()
CVE-2015-2305 - heap overflow vulnerability in regcomp.c
CVE-2015-2331 - ZIP Integer Overflow leads to writing past heap boundary
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
musl 1.1.7 brings in experimental aarch64 support so enable it.
Tested via qemu_aarch64_virt_defconfig.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"#include <linux/serial.h>" is needed in order to build trinity
successfully with uClibc. Otherwise it would fail displaying an error
message like this one:
-----------------------------------------
ioctls/vt.c:152:8: error: invalid application of 'sizeof' to incomplete
type 'struct serial_rs485'
IOCTL(TIOCGRS485),
ioctls/vt.c:155:8: error: invalid application of 'sizeof' to incomplete
type 'struct serial_rs485'
IOCTL(TIOCSRS485),
-----------------------------------------
Backporting an upstream patch to fix this problem.
Upstream commit:
fb4a1adc45
Fixes:
http://autobuild.buildroot.net/results/ca1/ca18c7d19ac2870d6b973923c8225509a12f831a/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 'perf' Makefile is flaky on some kernel versions. It will still parallelize
the build even with 'make -j1' because it explicitly invokes a sub-make with
the correct flags. But the top-level make is not smart enough to handle large
'-j' values.
Signed-off-by: Steven Noonan <steven@uplinklabs.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes various issues, one in particular reported by Pascal de Bruijn on
IRC where bash won't timeout when using readline as in 'read -e -t 10',
which should escape back to shell when left alone for 10 seconds.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dvd+rw-tools are used to master Blu-ray Disc and DVD Disc media,
both +RW/+R and -RW/-R. Note: The +RW in the name is a historical
artifact. This package contains the widely used growisofs program.
[Thomas:
- adjust minor formatting issues in Config.in file.
- remove unneeded empty line in hash file.
- make the mkisofs symbolic link a relative one.]
Signed-off-by: Steve Kenton <skenton@ou.edu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The internal toolchain was a "best effort" approach - we strived to make
it build properly and all but it's mostly untested.
Since it's got issues disable it until it's properly fixed and tested
and leave the official ADI toolchain instead.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also mark packages that depend on cups as deprecated as well for easier
tracking.
It would probably be better to mark it as a legacy option so users get a
warning when migrating configuration files, but it would require a
direct removal for that.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently we only add "host-texinfo" dependency for host GDB built
from git sources. But in case of target gdb texinfo won't be built
and so gdb building will fail on attempt to build documentation.
Fix is trivial - add "host-texinfo" as a dependency for target gdb
in the sme way as we disable documentation building via both
GDB_CONF_ENV (for target) and HOST_GDB_CONF_ENV (host) GDB flavors.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Anton Kolesov <akolesov@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+ rearrange the structure a bit by adding a new paragraph for the Config
files
Signed-off-by: Jan Heylen <heyleke@gmail.com>
[ThomasDS:
- clarify commit title
- add list continuations to fix indentation of Config.in.host details]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- overwrite platform support with linux template
- disable spinlock support
[Thomas: use the --with-template=linux option unconditionally.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes [1] in case postgresql-devel package is installed on the host:
libpq . . . . . . . . no (libpq-fe.h not found)
postgresql . . . . . no (dependency error)
configure: error: "Some plugins are missing dependencies - see the summary above for details"
Otherwise fixes the following configure warning:
configure: WARNING: pg_config returned with status 127
[1] http://autobuild.buildroot.net/results/336/336b3e932be245faa04969af960702af672916dc
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
fftw has options to select compile precision between single, long-double
and quad. These options are exclusives. This patch adds choice to select
precision option.
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
[yann.morin.1998@free.fr: use --disable-XXX when not enabled; reword
prompts (default is not 'none' but 'double')
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: guillaume william brs <guillaume.bressaix@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: fix hash origin, as noted by Baruch, upstream publishes a
hash file so there's no need to compute it locally.]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This version of libftdi can coexists beside the 0.x version.
Signed-off-by: Daniel Sangue <daniel.sangue@sangue.ch>
[Samuel Martin:
- libftdi1.mk: bump to version 1.2 and add hash
- cleanup uneeded libusb-compat stuff
- Config.in: add comment when ftdipp1 deps are not met
- fix typos in variable names and legit CMake options for *_CONF_OPTS
- add support for python bindings and ftdi_eeprom
- fix static build
- fix build with toolchain w/o C++ support
]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[Thomas:
- reorder Config.in option properties: first the "bool" property,
then the "selects", then the "depends on".
- remove "thread" dependency from the libftdipp1 comment since the
whole package can anyway not be selected if there's no thread
support.
- fix a big mistake in the .mk file:
$(if BR2_PACKAGE_PYTHON,python,python3)
replaced by:
$(if $(BR2_PACKAGE_PYTHON),python,python3)
- add license information.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: verify pgp signature and add comment to .hash]
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libcilk library (used on x86/x86-64 when building with C++ support)
unconditionally uses WCHAR_MIN / WCHAR_MAX, causing build issues with uClibc
when configured without wchar support.
Reported-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Assist configure IPv6 support detection for uclibc,
fixes the following uclibc compile failure:
auth.c: In function ‘CheckRADIUSAuth’:
auth.c:2379:24: error: ‘in6addr_any’ undeclared (first use in this function)
localaddr.sin6_addr = in6addr_any;
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Build with uclibc and locale support failes with the following error
message:
regc_pg_locale.c: In function ‘pg_wc_isdigit’:
regc_pg_locale.c:312:6: error: dereferencing pointer to incomplete type
isdigit_l((unsigned char) c, pg_regex_locale));
This can be fixed by overwriting the HAVE_LOCALE_T detection (thanks
to Alex Potapenko <opotapenko@gmail.com> for the hint [1]).
[1] http://lists.busybox.net/pipermail/buildroot/2015-March/121088.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Useful for packages shipped with a testsuite which makes use of ctest
Since ctest is just a tool provided by the cmake sources, this change
introduces a hidden BR2_PACKAGE_CMAKE symbol which is automatically
selected by the BR2_PACKAGE_CMAKE_CTEST one.
This is like this mostly for consistency (cmake is the actual package,
not ctest).
CMake is a particular package:
* CMake can be built using the generic infrastructure or the cmake one.
Since Buildroot has no requirement regarding the host system cmake
program presence, it uses the generic infrastructure to build the
host-cmake package, then the (target-)cmake package can be built
using the cmake infrastructure;
* CMake bundles its dependencies within its sources. This is the reason
why the host-cmake package only has host-pkgconf as (runtime)
dependency, whereas the (target-)cmake package has a lot of
dependencies, using only the system-wide libraries instead of
rebuilding and staitcally linking with the ones bundles into the CMake
sources.
[Thomas:
- add missing C++ dependency.
- add missing multiple 'select' in Config.in
- add missing wchar dependency, inherited from selecting libarchive.]
Signed-off-by: Davide Viti <zinosat@tiscali.it>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that libnl pkg-config file is correct, there is no need to have
special handling for static linking in the iw package: it already uses
pkg-config to get the necessary flags to link with libnl.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Instead of hardcoding the dependencies of libnl, use pkg-config to
discover them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Having a properly defined Libs.private field allows to make sure
static linking against libnl-3.0 works fine, at least as long as
pkg-config is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Now that Jörg's patch has been merged upstream, let's use the
backported version, in a git format.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Yannick Kiekens <yannickkiekens@gmail.com>
[Thomas: tested on ARM uClibc, and AArch64 glibc, the latter being the
case that used to fail building, and was the reason why boost log had
been disabled.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The computation of TOOLCHAIN_EXTERNAL_BIN has a special case for
Blackfin, where it's set to
$(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/$(TOOLCHAIN_EXTERNAL_PREFIX)/bin
instead of $(TOOLCHAIN_EXTERNAL_INSTALL_DIR)/bin for other
architectures.
However, this is actually only true for Analog Devices pre-built
toolchains. Other Blackfin external toolchains (such as ones built by
Buildroot) do not have this special organization.
Therefore, in order to make those non-ADI Blackfin toolchains work, we
need to change the condition from BR2_bfin to testing specifically for
the ADI toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libdri2 is a library for the DRI2 extension to the X Window System. This
is the split out dri2 client side code from mesa, libva, libvdpau, etc..
It can be used by applications or user-space drivers to provide
accelerated graphics.
Signed-off-by: Jérôme Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
/home/buildroot/instance-0/output/build/host-softether-16b713b98da8dba29f0f845d5a8c36d6f7c34824/src/Mayaqua/Unix.c:2066:
undefined reference to `clock_gettime'
[Thomas: remove commit 7663664113, which
was a different fix for the same problem.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The git hash 36413487f05b165dfc82ad307a5a1c36a795e607 no
longer refers to any commit id, even in the previous git tree.
By reading the Makefile and CHANGELOG.md the last know
release is 3.2.0.
Switch to the official git tree and use the 3.2.0 release tag.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
kconfig string option values should use double quotes when defined, so
this commit fixes package/uclibc/Config.in in that respect.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For the moment, we probably don't want to have several versions of
uClibc-ng supported at the same time. In preparation to the bump of
uClibc-ng to 1.0.1, this commit gets rid of the version number from
the uclibc-ng config option so that we don't have to rename this
option over and over again each time a new uClibc-ng release is
made. This would be annoying in terms of Config.in.legacy handling.
Since the option BR2_UCLIBC_NG_VERSION_1_0_0 has never been part of
any Buildroot release, we don't have to add anything to
Config.in.legacy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There is no need to warn the user about selecting an inappropriate
thread implementation, since we make sure only supported combinations
can be selected.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
uClibc-ng does not support linuxthreads or linuxthreads.old on
architectures that have NPTL support. This creates another complicated
dependency: dependeing on the uClibc version being used, not the same
thread implementations are available.
In order to handle this situation, this patch introduces three hidden
booleans:
- BR2_UCLIBC_VERSION_SUPPORTS_LINUXTHREADS
- BR2_UCLIBC_VERSION_SUPPORTS_LINUXTHREADS_OLD
- BR2_UCLIBC_VERSION_SUPPORTS_NPTL
They are selected by the different uClibc versions, depending on which
thread implementation they support on the different architectures.
Then, the choice of the thread implementation can rely on those
booleans to know if a given thread implementation is available in the
current architecture / uClibc version selection.
This makes sure that unusable thread implementation do not get
selected, therefore fixing build issues such as:
http://autobuild.buildroot.org/results/89e/89e423bee040cbce3e82cd89f1191efaac490c0d/
The support table is as follows (only taking into account
architectures that allow the selection of
BR2_TOOLCHAIN_BUILDROOT_UCLIBC, other architectures are not
considered) :
----uclibc---- uclibc-xtensa- --uclibc-arc-- --uclibc-ng---
LT LT.old NPTL LT LT.old NPTL LT LT.old NPTL LT LT.old NPTL
arc(le|eb) y y n n n n (1)
arm(eb) y y y n y y (2)
bfin n y n y y n
i386 y y y n n y (3)
m68k y y y y y n
mips(64)(el) y y y n n y
powerpc y y y n n y
sh y y y n n y
sparc y y y n n y
xtensa n y n n n y
x86_64 y y y n n y
(1) : uclibc-ng only has NPTL support for ARC but it requires a more
recent compiler version that hasn't been officially released
by Synopsys.
(2) : the general idea of uclibc-ng is to only support NPTL on
architectures where it is available. However, in order to
support ARM noMMU platforms, LT.old support has been kept on
ARM.
(3) : except i386 itself, which doesn't have what's needed for NPTL
support. i386 is simply not supported by uclibc-ng basically.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It was disabled in february 2013 by commit
e5434583ba
because did not build correctly with ucLibc at the time.
It now builds correctly with both uClibc v0.9.33 and uClibc-ng.
Signed-off-by: Noé Rubinstein <nrubinstein@aldebaran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Drop the ICU patch and ICU support since it's no longer necessary.
Use original hashes from sourceforge.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some packages, like GNURadio for VOLK, needs cheetah on host at buildtime.
The dependency on host-python-markdown is needed to avoid that setuptools
downloads markdown if it is not installed yet.
[Thomas: add comment in the .mk file.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
For some cmake based packages, like GNURadio, it's forbidden to do the
compilation directly in the sources directory. This patch add a new
variable to specify, if needed, the name of a sub-directory used to compile.
[Thomas: put the documentation at the right place in the manual, not
in the middle of the <pkg>_CONF_OPTS description.]
Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's pretty common, small and useful, specially since busybox ip doesn't
do neigh (and looking at /proc/net/arp is all fine but not very
friendly).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add qt4 '-psql_config' configure option and use it to set
pg_config path in configure step instead of legacy PSQL_LIBS
environment variable.
Fixes [1]:
PostgreSQL support cannot be enabled due to functionality tests!
Turn on verbose messaging (-v) to ./configure to see the final report.
If you believe this message is in error you may use the continue
switch (-continue) to ./configure to continue.
make: *** [/ssd1/thomas/autobuild/instance-0/output/build/qt-4.8.6/.stamp_configured] Error 101
Patch suggested upstream ([2]).
[1] http://autobuild.buildroot.net/results/1e9/1e949d4593836bc45a55e071cc54ff9c00fad8ae
[2] https://codereview.qt-project.org/108345
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Convert to autotools with a little help for static.
[Peter: simplify static handling]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to version 1.2.0, fixup patch, and add ensure package is installed
to the staging directory.
[Peter: keep Baruch's authorship on patch]
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop upstream patch (uclinux), adapt libnl patch to new version.
And add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We have them, let them be reachable.
[Peter: use relative URL like elsewhere]
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2015-1782 - kex: bail out on rubbish in the incoming packet.
Also add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-0261 - issues with IPv6 mobility printer.
CVE-2015-2153 - issue with tcp printer.
CVE-2015-2154 - issue with ethernet printer.
CVE-2015-2155 - issue with force printer.
CVE-2014-9140 fix is upstream so patch dropped.
System libpcap upstream as well so dropped.
CVE-2014-8767, CVE-2014-8768 and CVE-2014-8769 don't seem to be upstream
so keep.
And add hash file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The recommended form is without the trailing slash. Buildroot will add a slash
between FOO_SITE and FOO_SOURCE as appropriate.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not build test-static-link in case of shared only build,
fixes the following compile failure:
libtool: link: [..]/host/usr/bin/arm-buildroot-linux-uclibcgnueabi-gcc -std=gnu99 -I.. -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -static -o test-static-link test_static_link-test-link.o ../libevdev/.libs/libevdev.so -Wl,-rpath -Wl,[...]/build/libevdev-1.4/libevdev/.libs
[...]/arm-buildroot-linux-uclibcgnueabi/bin/ld: attempted static link of dynamic object `../libevdev/.libs/libevdev.so'
collect2: error: ld returned 1 exit status
Makefile:719: recipe for target 'test-static-link' failed
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a filesystem image is xz-compressed, the XZ variable is used to refer
to the xz compression tool, but it is not necessarily available. Add a
proper dependency to fix that.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- indicate upstream commit id, as suggested by Baruch.
- add SoB of Alexey inside the patch itself.
- adjust sequence number to 0003.]
Signed-off-by: Alexey Mednyy <swexru@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since commit 7b4fca6697 ("eudev: fix
mkstemp/mkostemp related build failure"), we had two patches with
sequence number 0001, which is not great. This commit fixes that by
setting one of the sequence number to 0002.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Install alternative symlinks for dosfstools mkfs.fat, fsck.fat and
fatlabel. Those symlinks are generally installed by make install, but
buildroot does not use make install for dosfstools, but symlinks should
be installed anyway.
[Thomas: rewrite the installation logic to use make style code rather
than shell code.]
Signed-off-by: Maxim Mikityanskiy <maxtram95@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libtool append the sysroot path (lt_sysroot) with the libdir value found in
the libstdc++.la file only with bfin toolchain.
Path/to/sysroot/opt/uClinux/bfin-linux-uclibc/lib/gcc/bfin-linux-uclibc/4.3.5/libstdc++.so
The issue disappears when --with-boost=$(STAGING_DIR) is removed.
So instead of using --with-boost=$(STAGING_DIR), use
--with-boost-libdir=$(STAGING_DIR)/usr/lib to give the path to boost's
libraries.
Fixes:
http://autobuild.buildroot.net/results/ae2/ae274693b953dd569c3ff63c532e2fc9553b5002/
And many more
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The PostgreSQL detection patch added in commit
1b54fbc925 ("qt5base: fix postgresql
plugin compile") had a minor issue: it was still calling the host
pg_config to decided whether or not PostgreSQL was available.
[Thomas: improve commit log.]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the generated fakeroot script has no error checking causing
make to continue building even if some of the fakeroot script commands
have failed. This can cause e.g. using an invalid device tables to go
unnoticed.
So add a "set -e" to the start of the fakeroot script so it will exit
with a failure code as soon as one of the script commands fails.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Add support for the alternative OpenSSL and Linux kernel crypto backends.
The latter does require that additional kernel modules (like algif_hash)
are present and loaded before invoking cryptsetup, so is used as last choice.
- Removes CRYPTSETUP_AUTORECONF as it is redundant, and reconf does
create a dependency on libgcrypt for the m4 macros used.
[Thomas: add an explicit --with-crypto_backend=gcrypt with the
libgcrypt backend is requested.]
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The RPi-2 has its own DTB, so document it in the list of generated
files.
Also, not all DTBs need to be present on the boot partition, so add a
comment that identifies which should be copied for each model.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Needed by SoftEther VPN.
host-readline will also be needed by host-pcre, which in turn will
be needed by the yet-to-be-released leafnode2 package.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some OpenLDAP deployment only need the client libraries and not the client
tools, so make the tool installation optional.
[Thomas: implement the for loop in make rather than in shell.]
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add a sleep 1 between stop and start, otherwise minidlnad
does not restart properly.]
Signed-off-by: Aurélien Chabot <aurelien@chabot.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add three upstream patch to support giflib version 5.1
Also rename the previous patches to match the order of the commits in
the upstream master branch.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add two upstream patch to fix a warning and a build failure of the
version 1.4.6.
Also add AUTORECONF because one patch change the file
"src/lib/Makefile.am".
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Qt-webkit-kiosk is a simple browser working in kiosk-mode, powered by
QtWebkit. It provides a convenient way to deploy a full-screen browser
on embedded system platforms.
This commit adds the appropriate packaging to Buildroot, including an
option to deploy the provided sound files.
Signed-off-by: Jerome Oufella <jerome.oufella@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add a new option BR2_GCC_ENABLE_LTO that builds gcc and binutils with
LTO support.
Individual packages still have to enable LTO explicitly by passing '-flto' to
GCC, which passes it on to the linker. This option does not add that flag
globally. Some packages detect if the compiler supports LTO and enable the flag
if it does.
To support LTO, ar and ranlib must be called with an argument which triggers the
usage of the LTO plugin. Since GCC doesn't call these tools itself, it instead
provides wrappers for ar and ranlib that pass the LTO arguments. This way
existing Makefiles don't need to be changed for LTO support. However, these
wrappers are called <tuple>-gcc-ar which matches the pattern to link to the
buildroot wrapper in the external toolchain logic. So the external toolchain
logic is updated to provide the correct symlink.
[Thomas:
- Add a separate BR2_BINUTILS_ENABLE_LTO option to enable LTO
support in binutils. This is a blind option, selected by
BR2_GCC_ENABLE_LTO. It just avoids having binutils.mk poke
directly into gcc Config.in options.
- Remove the check on the AVR32 special gcc version, which we don't
support anymore.
- Adapt the help text of the LTO Config.in option to no longer
mention "Since version 4.5", since we only support gcc >= 4.5 in
Buildroot anyway.
- Fix typo in toolchain-external.mk comment.]
Signed-off-by: Peter Kümmel <syntheticpp@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In commit d54418f2bc ("crda: fix static
build failure"), some static linking handling was added in crda. But
in a later commit, 7c08fa935f ("crda:
needs dynamic library support"), crda was marked as not available for
static only builds.
This means that the static linking logic in crda.mk is now just dead
code, so this commit gets rid of it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
The -I<dir> options added to CMAKE_C_FLAGS are passed to the compiler
before the -I<dir> options of the cmake internal headers, so when the
host-xz package was already built, a #include <lzma.h> directive loads
the host-xz header instead of the cmake internal one.
Because we don't want to use any header avaiable in -I$(HOST_DIR)/usr/include,
just get rid of the -I<dir> options in the HOST_CFLAGS.
Fix build failure:
make host-xz host-cmake
.../output/build/host-cmake-3.1.3/Utilities/cmliblzma/liblzma/common/block_buffer_decoder.c:17:1: error: conflicting types for ‘lzma_block_buffer_decode’
lzma_block_buffer_decode(lzma_block *block, lzma_allocator *allocator,
^
In file included from /home/tetsuya/buildroot/br2/output/host/usr/include/lzma.h:296:0,
from /home/tetsuya/buildroot/br2/output/build/host-cmake-3.1.3/Utilities/cmliblzma/liblzma/common/common.h:34,
from /home/tetsuya/buildroot/br2/output/build/host-cmake-3.1.3/Utilities/cmliblzma/liblzma/common/block_decoder.h:16,
from /home/tetsuya/buildroot/br2/output/build/host-cmake-3.1.3/Utilities/cmliblzma/liblzma/common/block_buffer_decoder.c:13:
/home/tetsuya/buildroot/br2/output/host/usr/include/lzma/block.h:577:27: note: previous declaration of ‘lzma_block_buffer_decode’ was here
extern LZMA_API(lzma_ret) lzma_block_buffer_decode(
^
Utilities/cmliblzma/CMakeFiles/cmliblzma.dir/build.make:261: recipe for target 'Utilities/cmliblzma/CMakeFiles/cmliblzma.dir/liblzma/common/block_buffer_decoder.c.o' failed
make[3]: *** [Utilities/cmliblzma/CMakeFiles/cmliblzma.dir/liblzma/common/block_buffer_decoder.c.o] Error 1
Fixes:
http://autobuild.buildroot.org/results/4edf6e169dc4a00d8a8bd16a86eba2316cbbd9e5http://autobuild.buildroot.org/results/a9ff38b22a36a2f8427d33085d3263a8cbfbd746http://autobuild.buildroot.org/results/ecaa0227249207b5450519832a193c1585ac8177
[Thomas:
- simplify the sed expression. Instead of trying to remove '-I
<something>' from $(HOST_CFLAGS), simply remove $(HOST_CPPFLAGS)
from $(HOST_CFLAGS).
- add the same logic for HOST_CXXFLAGS.]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Samuel Martin <s.martin49@gmail.com>
Tested-by: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is a small development board, based on Freescale IMX6 Solo SoC
(single core ARM Cortex-A9). The board has excellent support in mainline
U-Boot and Linux.
Signed-off-by: Nikolay Dimitrov <picmaster@mail.bg>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When ncurses wide is enabled samba doesn't automatically find the
appropiate ncurses-config script and finds the host variant (which is
non-widec) which leaks improper library directories into the build.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now with support for AD DC, ADS and clustering features.
All dropped patches are upstream.
[Thomas: move indentation fixes to a separate patch.]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation to the bump of samba4 to 4.2, let's re-indent the
samba4.mk to the usual Buildroot convention.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
-fPIE produces shared objects, and shared objects need "/lib/ld.so"
which won't be present on a statically built target. So, building
openswan with -static -fPIE is invalid and will fail with an error like
this one:
/br/output/host/opt/ext-toolchain/bin/../lib/gcc/mipsel-ctng-linux-uclibc/4.8.2/../../../../mipsel-ctng-linux-uclibc/bin/ld:
/br/output/host/usr/mipsel-buildroot-linux-uclibc/sysroot/usr/lib/libgmp.a(lt2-add.o):
relocation R_MIPS_HI16 against `__gnu_local_gp' can not be used when
making a shared object; recompile with -fPIC
Fixes:
http://autobuild.buildroot.net/results/68b/68b2211cc7acfbdfed8d4b161cbdaf1429315017/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Change 0002-imlib2-config.patch to patch configure.in instead of
configure to survicve the autoreconf step introduced by [1].
Fixes the following runtime error, e.g. from df_texture:
(!) Direct/Interface: Unable to dlopen `/usr/lib/directfb-1.6-0/interfaces/IDirectFBImageProvider/libidirectfbimageprovider_imlib2.so'!
--> /usr/lib/directfb-1.6-0/interfaces/IDirectFBImageProvider/libidirectfbimageprovider_imlib2.so: undefined symbol: imlib_image_get_width
[1] http://git.buildroot.net/buildroot/commit/?id=7e9264956bb5693bc49274ee0b42ffb4c869e23f
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes the following runtime error e.g. from df_texture:
(!) Direct/Interface: Unable to dlopen `/usr/lib/directfb-1.6-0/interfaces/IDirectFBImageProvider/libidirectfbimageprovider_svg.so'!
--> /usr/lib/libsvg.so.1: undefined symbol: png_set_gray_1_2_4_to_8
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The patch 0002-Fix-compiler-warning-flags.patch was
removed when the avr32 architecture was removed.
But it's still needed for blackfin adi-toolchain 2014R1.
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE can either be a complete
.config file or a defconfig file, it can be confusing to the user
whether to choose BR2_LINUX_KERNEL_USE_DEFCONFIG or
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG.
To avoid that confusion, clarify Kconfig entry messages for in-tree
defconfig and custom (def)config files.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Update configuration to use the 3.18.8 kernel and update U-Boot to
2015.01. With the switch to 2015.01. use the U-Boot SPL image for the
first stage bootloader instead of the at91bootstrap. The U-Boot SPL
requires that the U-Boot image format be u-boot.img in order to load
from the SD card.
Signed-off-by: Ryan Barnett <ryanbarnett3@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes:
CVE-2015-2187 - The ATN-CPDLC dissector could crash.
CVE-2015-2188 - The WCP dissector could crash.
CVE-2015-2189 - The pcapng file parser could crash.
CVE-2015-2190 - The LLDP dissector could crash.
CVE-2015-2191 - The TNEF dissector could go into an infinite loop.
CVE-2015-2192 - The SCSI OSD dissector could go into an infinite loop.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Portaudio as a whole already depends on threads support, so there is no
need to have an additional dependency for its alsa module.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When building device tree blobs from custom *.dts files, buildroot
initializes KERNEL_DTS_NAME variable from all given file names.
This causes that user can't provide one *.dts file and some other
*.dtsi files as dependencies.
Problem is fixed by adding filter for initializing KERNEL_DTS_NAME
variable with *.dts files only. All user provided files are copied
into kernel source tree, but only file names suffixed with *.dts
are used for building appropriate *.dtb files.
[Thomas: add comment into the code to explain why we are filtering
.dts files only.]
Signed-off-by: Ivo Slanina <ivo.slanina@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
vlc can use the freerdp library if present.
This is currently a hidden dependency, as we do not express it in our
vlc.mk rules. Package ordering makes it so that freerdp is built before
vlc; however, manually building vlc (with 'make vlc') would miss the
dependency because of that package ordering.
Explcitly add freerdp (if enabled) as a dependency of vlc to ensure
build order in every cases.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since 6.03 syslinux release, the gnu-efi sources are bundled whith
syslinux. We need to force the build system to use the Buildroot's
gnu-efi package.
Remove the patch for find-gnu-efi.sh script which was removed, as well
as the SYSROOT variable from the BUILD_CMDS, which is no longer
needed.
There are still some parallel build issues, so MAKE1 can't
be removed for now.
Add a hash file.
Fix indentation.
[Thomas: fix minor typos in a new comment in the .mk file.]
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In preparation for the deprecation of certain features in 2015.05, add
the BR2_DEPRECATED_SINCE_2015_05 symbol.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Barebox uses KERNEL_ARCH to derive BAREBOX_ARCH, but doesn't
currently handle the case of the x86-64 architecture. In this
case KERNEL_ARCH is x86_64, but BAREBOX_ARCH should be x86
nonetheless.
Signed-off-by: Fabien Lahoudere <fabienlahoudere.pro@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Default to glibc over eglibc where it's possible and/or convenient.
Since the eglibc project is basically gone and merged with glibc it
doesn't make sense to keep defaulting to it for architectures that
aren't uClibc-capable.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
We don't support older versions that can't handle it any more.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu_arm_vexpress_defconfig is broken for 3.19 so keep it with 3.18.x
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following message when libglib2 is enabled but not already
built:
Package glib-2.0 was not found in the pkg-config search path.
Perhaps you should add the directory containing `glib-2.0.pc'
No package 'glib-2.0' found
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the following message when libfribidi is enabled but not already
built:
Package fribidi was not found in the pkg-config search path.
Perhaps you should add the directory containing `fribidi.pc'
No package 'fribidi' found
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add to HOST_SHARED_MIME_INFO_DEPENDENCIES the missing dependencies
host-libxml2 and host-libglib2.
Also remove from SHARED_MIME_INFO_DEPENDENCIES dependencies already
present in HOST_SHARED_MIME_INFO_DEPENDENCIES.
Fix build failure:
configure: error: Package requirements ( libxml-2.0 >= 2.4 glib-2.0 >= 2.6.0) were not met
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contrary to mainline uClibc, uClibc-ng has support for NPTL on Xtensa,
so let's allow selecting NPTL when a uClibc version other than the
Xtensa special uClibc version is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
This commit adds support for a new uClibc version: uClibc-ng
1.0.0. Since its build system is for now exactly the same as the one
of uClibc, we don't create a new package, but instead simply add it as
a new uClibc version.
The only special trick needed is the creation of a symlink to the
program interpreter, due to a mismatch between the program interpreter
file name generated by uClibc-ng and the one used by gcc.
This patch is heavily based on previous work from Waldemar Brodkorb.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Waldemar Brodkorb <wbx@uclibc-ng.org>
The rpi-firmware we currently package has a fiscious bug, that happens
in corner cases while reading config.txt (mostly seen on RPi-2, but may
also occur on RPi-1).
Both the DT-aware and DT-unaware branches are affected.
Bump to the latest rpi-firmware to fix that.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix build failure:
./configure: line 11453: /home/tetsuya/buildroot/br/output/host/usr/bin/pkg-config: No such file or directory
configure: error: in `/home/tetsuya/buildroot/br/output/build/xcb-util-keysyms-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Fix build failure:
configure: error: Package requirements (xcb >= 1.4) were not met:
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The "make host-freetype-patch" fails because using the autogen.sh script
doesn't find the autoconf tool. The problem was already fixed for
"make freetype-patch" adding the "host-automake" as a prerequisite to
freetype-patch, so fix it by adding "host-automake" as a prerequisite to
"host-freetype-patch" too.
Fix build failure:
running `autoconf --force'
./autogen.sh: line 15: autoconf: command not found
error while running `autoconf --force'
package/pkg-generic.mk:146: recipe for target 'buildroot/output/build/host-freetype-2.5.5/.stamp_patched' failed
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a patch to fix a typo that on a system with make v4.0 and
BR2_CIVETWEB_WITH_LUA=y fails to build:
Makefile:203: *** mixed implicit and normal rules. Stop.
The patch was not sent upstream because this problem is already fixed on
master.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pinentry sets the NCURSES_INCLUDE variable in the Makefile to
/usr/include/ncurses and that causes problems when cross-compiling
because it fails with an error like this one:
Making all in curses
make[3]: Entering directory `/br/output/build/pinentry-0.9.0/curses'
/br/output/host/usr/bin/mips64el-ctng_n64-linux-gnu-gcc -DHAVE_CONFIG_H
-I. -I.. -I/usr/include/ncursesw -I../pinentry -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Wall -D_LARGEFILE_SOURCE
-D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -Wall -Wcast-align
-Wshadow -Wstrict-prototypes -Wno-pointer-sign -c pinentry-curses.c
mips64el-ctng_n64-linux-gnu-gcc: ERROR: unsafe header/library path used
in cross-compilation: '/usr/include/ncursesw'
make[3]: *** [pinentry-curses.o] Error 1
Fixes:
http://autobuild.buildroot.net/results/5b9/5b9b53a37f7cf4bab4d989f852726a0f0885605f/
[Peter: use --with-ncurses-include-dir=none instead]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Change $CURL_CONFIG to $(CURL_CONFIG) in the patch
0004-use-correct-curl-config.patch because in a makefile the braces are
required to expand a variable.
Fix error messages:
make[3]: Entering directory '/home/tetsuya/buildroot/br2/output/build/libxmlrpc-1.25.30/lib/curl_transport'
make[3]: URL_CONFIG: Command not found
/bin/sh: line 0: test: <: unary operator expected
make[3]: URL_CONFIG: Command not found
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
configure looks for emacs installation to byte compile .el files. This may
break the build if the host installed emacs is missing needed dependencies.
Since we don't (yet?) package emacs for target, just disable detection of
emacs.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
CVE-2015-1606: Use after free, resulting from failure to skip invalid packets
CVE-2015-1607: memcpy with overlapping ranges, resulting from incorrect
bitwise left shifts
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The code in gcconfig.h indicates that the list of supported architectures is
now a superset of BR2_PACKAGE_LIBATOMIC_ARCH_SUPPORTS so we can drop
BR2_PACKAGE_BDWGC_ARCH_SUPPORTS.
Also, add a hash file.
Cc: Pedro Aguilar <paguilar@paguilar.org>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stripping is globally handled by target-finalize (if enabled), so drop it
from here.
Reported-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Lock to 3.19 kernel headers; and comment about installing DTBs; bump
kernel sha1.
Reported-by: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The instructions for the Raspberry Pi 2 (aka model B2) are the same as
the ones for the Raspberry Pi, so:
- state so in the existing readme
- create a symlink raspberrypi2 -> raspberrypi
Also fix typo in spelling of "Raspberry Pi" (two words, not one).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
1] BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_QTDEMUX is not defined anywhere
2] qtdemux is not a plugin by itself but belongs to isomp4
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- Use BR2_INSTALL_LIBSTDCPP instead of BR2_TOOLCHAIN_BUILDROOT_CXX,
so that the condition also works with external toolchains.
- Use a 'if BR2_PACKAGE_LIBSIGROK' instead of duplicating the
dependency.]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The place for package-provided systemd units is /lib/systemd/system.
/etc/systemd/system is for custom units.
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bump to the following trinity repository commit:
kvm: Add ifdef around IA64 ioctls.
Fix build error.
CC ioctls/kvm.o
In file included from ioctls/kvm.c:8:0:
ioctls/kvm.c:115:8: error: ‘KVM_IA64_VCPU_GET_STACK’ undeclared here (not in a function)
IOCTL(KVM_IA64_VCPU_GET_STACK),
^
include/ioctls.h:53:15: note: in definition of macro ‘IOCTL’
{ .request = _request, .name = #_request, }
^
ioctls/kvm.c:116:8: error: ‘KVM_IA64_VCPU_SET_STACK’ undeclared here (not in a function)
IOCTL(KVM_IA64_VCPU_SET_STACK),
^
include/ioctls.h:53:15: note: in definition of macro ‘IOCTL’
{ .request = _request, .name = #_request, }
IA64 ioctls were removed in Linux 3.19.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
After removing the patch 0001-Add-stack... in commit
9863553fe8 "packages: all salute the
passing of avr32" the patch 004-Add-stack... does not apply anymore, so
fix it.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add reverse dependency for Weston.
Fix build error:
make[3]: Entering directory '/home/tetsuya/buildroot/br/output/build/freerdp-b21ff842ef3de5837513042dc30488b12bd9cf9d'
In file included from /home/tetsuya/buildroot/br/output/build/freerdp-b21ff842ef3de5837513042dc30488b12bd9cf9d/winpr/include/winpr/winsock.h:24:0,
from /home/tetsuya/buildroot/br/output/build/freerdp-b21ff842ef3de5837513042dc30488b12bd9cf9d/winpr/libwinpr/winsock/winsock.c:24:
/home/tetsuya/buildroot/br/output/build/freerdp-b21ff842ef3de5837513042dc30488b12bd9cf9d/winpr/include/winpr/wtypes.h:132:1: error: unknown type name ‘wchar_t’
typedef wchar_t UNICODE;
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: James Hebden <james@hebden.net.au>
[yann.morin.1998@free.fr: fix commit log; further bump]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: "Guillermo A. Amaral" <g@maral.me>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Misc fixes and improvements for: DT; hdmi and EDID; video decoding,
latency and cropping; voltage calculations...
Also: support for RPi-2. :-)
Also remove the workaround previously required when installing DTBs, ad
they are now in the same branch as the latest firmware.
Signed-off-by: James Hebden <james@hebden.net.au>
Signed-off-by: "Guillermo A. Amaral" <g@maral.me>
[yann.morin.1998@free.fr: further bump, fix and trim commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Misc fixes and enhancements for: vsync; building with musl; clocks;
memory compaction...
Drop musl patches: applied upstream, yeah! :-)
Rename remaining patches, refresh on top latest master, and use
git-format to re-generate the patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the keys are only installed if the server is enabled.
However, other packages (e.g. weston) may implement an RDP server,
using the FreeRDP library.
So, we must always install the key and certificate.
Install them world-readable so non-root users may start an RDP server
without requiring to generate their own keys.
Add a comment in the help text about key and certificate management.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- Don't explicitly pass CC_FOR_BUILD and CFLAGS_FOR_BUILD, those are
already part of the default environment passed by the
autotools-package infrastructure.
- Explicitly disable Lua and LuaJIT support to avoid mis-detection of
host installation.
- Explicitly handle the optional support of libxml2, OpenSSL and
zlib. Especially, the absence of explicit handling for libxml2 was
causing a build failure due to the host libxml2 being detected.
- Remove /usr/manual and /usr/build from the target. This saves 20+
MB of target space.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Using the RDP compositor, one can run a headless machine to serve remote
clients, using the RDP protocol.
Add an option to enable the rdp-backend.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This is mandatory for an RDP server to have a key and a certificate,
otherwise clients will refuse to connect to that server.
We install the key and certificate bundled in FreeRDP. The user can
install its own set using a post-build script if needed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Building the client or the server requires an X.Org stack.
Since freerdp can also be used for weston (wayland-based, hence no X.Org
stack), we may want to disable the client and server.
Conversely, even with an X.Org stack, we may want to enable either or
none if we're just interested in the library.
Add two options, one to enable the server, the other the client; the
client option defaults to 'Y' so that a previous .config can be re-used
as-is, and exhibit the same behaviour as before; the server option
defaults to 'N' as we were not ever building the server so far.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It is possible to build the libfreerdp standalone, without X.Org.
Having a libfreerdp will be usefull for the weston RDP compositor.
So, only select the strictly required X.Org library if X.Org is enabled,
and only build with Xcursor if it is enabled. Drop dependency on other
X.Org libraries, as they are not strictly required (or get pulled as
dependencies of the mandatory libXext).
Re-order the menuconfig, as freerdp is no longer an X-only application.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
FreeRDP still uses old-style variables (about linking interfaces), and
that causes a warning, which explicitly states it is targeted at
developers:
Policy CMP0022 is not set: INTERFACE_LINK_LIBRARIES defines the link
interface. Run "cmake --help-policy CMP0022" for policy details. Use the
cmake_policy command to set the policy and suppress this warning.
Target "freerdp-client" has an INTERFACE_LINK_LIBRARIES property which
differs from its LINK_INTERFACE_LIBRARIES properties.
INTERFACE_LINK_LIBRARIES:
[elided list of stuff]
LINK_INTERFACE_LIBRARIES:
This warning is for project developers. Use -Wno-dev to suppress it.
So, just get rid of it as instructed in that warning message itself.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since we bumped to CMake-3.1, the build of FreeRDP is broken:
CMake Error at channels/client/CMakeLists.txt:33 (list):
list sub-command REMOVE_DUPLICATES requires list to be present.
This has been fixed upstream, so just bump the version to get that fix.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch sets the default timezone to UTC if not overwritten.
Some packages need a configured system timezone for properly
operating like mono based software.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch only adds the userland part. Unless other such other
packages (which we named like: rpi-userland), we do not replicate this
naming scheme with this package, as a future patch will also enable
building the kernel part of the driver. So, it is better to just name
that package with -driver, rather than with -userland and renaming it
afterwards.
[Thomas:
- Rewrap Config.in help text.
- Add a comment to explain why mesa3d-headers, xlib_libX11 and
xlib_libXext are part of the dependencies.
- Fix typo in comment about library installation: s/The/Then/
- Use 'addsuffix' instead of 'patsubst' to calculate the final
filename of libraries to install.
- Use more temporary variables to make the library installation loop
clearer: 'libpath' is the relative path of the library in
nvidia-driver sources, 'libname' the base name of the library,
'libsoname' the soname of the library, and 'baseso' the base .so
symlink name.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Some OpenGL/EGL/GLES/VG providers do not provide the corresponding
headers, and rely on using "the headers provided by the distribution".
In our case, we can not rely on such headers, because we are not a
distribution, and we have no way to provide those headers (not even
speaking about relying on the headers provided by hte host distribution,
because they might well not be installed at all).
Also, we can not rely on another package to provide those headers,
because we can only have one provider enabled in any configuration.
The Khronos group provides such headers, and they are the reference
headers, but we can not realy use them:
- most of them are not packaged: they are not versioned and not
provided in a tarball, but as separately downloadable files;
- those headers are anyway incomplete: there are headers not provided
by Khronos, like GL.h
Instead, we rely on mesa3d to provide those headers: mesa3d has all the
headers we need.
Modifying the existing mesa3d package would not be easy; we'd have to
differentiate whther we need only the headers or the full package. The
meas3d Config.in and .mk are already quite non-trivial that adding such
a feature would render them even more illegible.
So, we introduce mea3d-headers as a new package, that is in fact just
mesa3d with a much simplified Config.in and .mk, that other OpenXXX
providers may select if they do not provide the OpenXXX headers.
Note: we're not installing GLES3 headers, because what Buildroot
currently calls libgles is in fact libgles2; we have no way to specify
that we have libgles3. So, we just install headers for GLES and GLES2.
[Thomas:
- Wrap Config.in help text to a reasonable length.
- Don't rely on mesa3d to provide mesa3d-headers: they should be
mutually exclusive. Instead, error out if both packages are
selected.
- Take into account the update of mesa3d to 10.4.5.
- Don't copy each header file individually, use a cp -dpfr call to
copy entires header files directories.]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes BR2_PACKAGE_PYTHON3_PYEXPAT description and
help text to underline that all the xml libraries will be
included in python.
It also reorders alphabetically the affected option.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch changes BR2_PACKAGE_PYTHON_PYEXPAT description and
help text to underline that all the xml libraries will be
included in python.
It also reorders alphabetically the affected option.
Signed-off-by: Angelo Compagnucci <angelo.compagnucci@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
And drop thread requirement, it's really not necessary.
For python-dialog that was already inherent in python itself.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This package contains a collection of freely re-usable autoconf
macros.
[Thomas:
- change site to $(BR2_GNU_MIRROR), so that an official GNU site is
used.
- Change license to "GPLv3+ with exception", and add
COPYING.EXCEPTION to the list of license files.]
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Libsigrok can be built without libserialport. Don't select it
in Config.in from both libsigrok and sigrok-cli and add a check
to libsigrok.mk to determine whether libserialport should be
enabled.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
According to http://sigrok.org/wiki/Libserialport:
Note: While libserialport is hosted on sigrok.org (and sigrok
uses libserialport), this is a completely independent library
that can be used by other projects as well. The libserialport
library does not depend on any sigrok related libraries or
projects.
Drop the fragment about being a part of the sigrok suite and
extend the help text.
Signed-off-by: Bartosz Golaszewski <bgolaszewski@baylibre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adds support for the BlueGiga WF111 WiFi driver and the binary utilities
distributed alongside the driver. An account is required to download the
sources from the BlueGiga website, which can be created freely. The
driver is available for armv5, arm7a and i386.
Since it is not possible to automatically retrieve the sources, because
of the required user account needed on the BlueGiga website, an option
is added to let the Buildroot user specify the directory where the
driver tarball was downloaded.
Finally, two options must be selected in the Linux kernel configuration:
CONFIG_WIRELESS_EXT and CONFIG_WEXT_PRIV. These are blind options (i.e.
not selectable directly) so they cannot be enabled by a change in
linux/linux.mk. The user as two choices to enable these options:
- By making them non blind, with a "WF111 support" configuration entry
for example.
- By enabling another WiFi driver that select them.
The work behind this commit was funded by ECA Group
<http://www.ecagroup.com>. ECA Group is the copyright owner of the
contributed code.
Signed-off-by: Antoine Tenart <antoine.tenart@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit makes the ARC uClibc version handling explicit by adding a
BR2_UCLIBC_VERSION_ARC_GIT option, rather than only relying on the
selected architecture. This is needed in preparation to the
introduction of uClibc-ng support, which also supports the ARC
architecture: so we will now have two uClibc versions capable of
handling ARC.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Add option for enabling a minimal internal copy of OpenSSL usable for USM
security. It will not enable the usage of SNMP over (D)TLS.
[Thomas: use 'else ifeq' to avoid having another nested ifeq ... endif
block.]
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The netsnmp package consists of both a server and a number of client
tools, this makes the installation of both parts optional.
[Thomas:
- Add explicit --enable-{agent,applications}, and use positive logic.
- Remove "net-snmp" from the new Config.in option prompts, since
they are already visible under the netsnmp package option.]
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xserver_xorg-server needs libdrm only when DRI is enabled, see configure.ac,
line 1280. But since version 1.16.99.901 configure searches for optional libdrm
support in configure.ac, line 2041,
http://cgit.freedesktop.org/xorg/xserver/commit/configure.ac?id=2feda3b6b58f46cef91ea41312aac9021a703777
as well due to libdrm support being enabled by default, but the macro
PKG_CHECK_EXISTS used in line 2041 does not add libdrm-specific CFLAGS to
Makefile causing the build to fail:
In file included from dumb_bo.c:36:0:
/home/br/br7/output/host/usr/i586-buildroot-linux-uclibc/sysroot/usr/include/xf86drm.h:40:17: fatal error: drm.h: No such file or directory
#include <drm.h>
This patch enables libdrm support only when dri support is enabled, which in
turn depends on mesa3d. Since mesa3d selects libdrm already remove that line
from Config.in as well.
Tested using this defconfig
BR2_TOOLCHAIN_BUILDROOT_LARGEFILE=y
BR2_TOOLCHAIN_BUILDROOT_WCHAR=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XSERVER_XORG_SERVER=y
BR2_PACKAGE_XSERVER_XORG_SERVER_MODULAR=y
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 1.7.0
- Add a hash file
libinput is now a required dependency:
configure: WARNING: unrecognized options: --disable-libinput-backend
checking for LIBINPUT_BACKEND... no
configure: error: Package requirements (libinput >= 0.8.0) were not met:
Package libinput was not found in the pkg-config search path.
Perhaps you should add the directory containing `libinput.pc'
to the PKG_CONFIG_PATH environment variable
No package 'libinput' found
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a patch to gcc removing a unistd.h header include
in libgcc/config/nios2/linux-atomic.c
The file is built as part of GCC first stage (host-gcc-initial),
and so the header is not accesible. Given the header is not needed
it's fine to simply remove it.
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
If a target user is asigned a UID (e.g. 1000) that happens to also exist
on the build machine, tar will happily store the username for that user.
This can be seen by some as potential information disclosure.
Instruct tar to just store the numeric uid/gid.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also add hash file and build fix patch (upstream) for kernels >=3.19.
Drop old patches that were upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 219
- Update the hash file
- Remove non-existent configure options
- Adapt patch to make it apply on version 219
Packages depending on systemd (bluez5-utils, dbus, liblogging,
pulseaudio) have been built successfully with this new version.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we have absolutely zero reference to the avr32 architecture, we
can now really decommission the symbol.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Slightly reword a comment to no longer mention avr32.
This part dealing with sysroot detection will have to be reworked, now
that we got rid of avr32: we can now require a fully sysroot-aware
toolchain, i.e. at least gcc-4.4.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
CC: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
avr32 was slated for removal in 2015.02. Make it so!
This patch only definitively hides the symbol. When all references
to it are eradicated (to come in followup patches), we'll eventually
kill the symbol altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When Buildroot is configured to append the root filesystem to the Linux
kernel as initramfs, Buildroot sets the path to the initramfs source
dynamically in the Linux configuration file.
As this path is specified as an absolute path, typically being different
for different users of the same project (e.g. containing a username),
saving the configuration to a version control system (for example using
'make linux-update-defconfig') would result in a difference for this
path at every invocation by a different user.
Although this is technically not an issue, it is confusing that this
generates a difference.
Address this issue by using a not-yet-expanded make variable to specify
the path to the initramfs source. That variable will be expanded by the
Linux build system, which uses it both as a Makefile variable and a
shell variable; thus, it needs to be specified in LINUX_MAKE_ENV (so
it is exported and available in sub-processes of make). Any saved
configuration file would simply contain the reference to the
not-yet-expanded variable.
As in the Linux build system, the config variables are both read from
make as from a shell script, we cannot use $() syntax as this would be
interpreted as a command invocation by the shell. Instead, use ${}
syntax which is interpreted as variable reference both by the shell as
by make.
[Thomas:
- Really make the patch work by using $(LINUX_MAKE_ENV) instead of
$(TARGET_MAKE_ENV). Otherwise, the new BR2_BINARIES_DIR variable is
not passed at all stages of the build process, which makes the
build fail when an initramfs is used.]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use $(BAREBOX_DIR) instead of $(@D) when defining
BAREBOX_SOURCE_CONFIG, because $(@D) has no value at this point
since we're outside of a make rule. This was causing Barebox to be
constantly rebuilt, since the defconfig path was not a full path,
it was looking like: '/arch/arm/configs/tegra_v7_defconfig'. The
solution of using $(BAREBOX_DIR) has been used to mimic was is done
in the linux package, which uses $(LINUX_DIR).]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Migrate the linux package to the kconfig infrastructure.
A notable change compared to the original behavior:
- the targets linux-update-(def)config are now always saving the config
file, even for a defconfig bundled in the linux sources. This is done
to keep the kconfig infrastructure simple.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Replace a 'cp --preserve' with a 'touch --reference' so that the code
for foo-update-config and foo-update-defconfig is symmetrical to ease
maintainability and increase clarity.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds support for using a defconfig file instead of a full
.config. This is a precondition to migrate packages like linux and
barebox to the kconfig infrastructure.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When the configuration file of a package is located inside of the
package sources, a make dependency can only be expressed after the
package has been extracted (and patched).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: "Yann E. Morin" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- remove patches, all were applied upstream
- add support for libglamor, needed by package/x11r7/xdriver_xf86-video-ati
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
xdriver_xf86-video-ati needs glamor support from xserver_xorg-server,
which in turn depends on libepoxy.
[Thomas: add license information.]
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The lxml XML toolkit is a Pythonic binding for the C libraries libxml2
and libxslt.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
[yann.morin.1998@free.fr: fix staging path; trim dependencies of
the host variant]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Use CMAKE_RULE_MESSAGES and CMAKE_INSTALL_MESSAGE variables to reduce
cmake output when it is a silent build.
[Thomas:
- use ifneq instead of ifdef
- remove unneeded else clause
- also add to the host variant of the configure commands]
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The XLDFLAGS is for ld related flags so use TARGET_LDFLAGS instead of
TARGET_CFLAGS, also the TARGET_CFLAGS is already used for XCFLAGS.
This fix is also needed for supporting the per-package staging directory.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The configure script uses PKG_CHECK_MODULES, so explictly add it to
dependencies instead of relying on the fact that the xserver pulls it in.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas:
- remove trailing whitespace
- remove "# libnl" comment in Config.in
- remove BATCTL_SOURCE, which is not needed, since the default value
is used
- pass $(TARGET_CONFIGURE_OPTS) in the make environment, not as a
make option, otherwise the CFLAGS += lines of batctl Makefile do
not have any effect, and lead to not have the proper include path
to the libnl header files.]
Signed-off-by: Jens Zettelmeyer <zettelmeyerj@goooglemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
- Bump version to 1.3.7
- Update the hash file
- Use xz instead of bz2 to save disk space and bandwidth
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
