Update for 2012.11-rc2

Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>

.gitignore

@@ -0,0 +1,14 @@
+/output
+/dl
+/.auto.deps
+/.config.cmd
+/.config.old
+/..config.tmp
+/.config
+*.depend
+*.o
+/*.patch
+/*.diff
+*.orig
+*.rej
+*~

COPYING

@@ -0,0 +1,339 @@
+		    GNU GENERAL PUBLIC LICENSE
+		       Version 2, June 1991
+
+ Copyright (C) 1989, 1991 Free Software Foundation, Inc.,
+ 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
+ Everyone is permitted to copy and distribute verbatim copies
+ of this license document, but changing it is not allowed.
+
+			    Preamble
+
+  The licenses for most software are designed to take away your
+freedom to share and change it.  By contrast, the GNU General Public
+License is intended to guarantee your freedom to share and change free
+software--to make sure the software is free for all its users.  This
+General Public License applies to most of the Free Software
+Foundation's software and to any other program whose authors commit to
+using it.  (Some other Free Software Foundation software is covered by
+the GNU Lesser General Public License instead.)  You can apply it to
+your programs, too.
+
+  When we speak of free software, we are referring to freedom, not
+price.  Our General Public Licenses are designed to make sure that you
+have the freedom to distribute copies of free software (and charge for
+this service if you wish), that you receive source code or can get it
+if you want it, that you can change the software or use pieces of it
+in new free programs; and that you know you can do these things.
+
+  To protect your rights, we need to make restrictions that forbid
+anyone to deny you these rights or to ask you to surrender the rights.
+These restrictions translate to certain responsibilities for you if you
+distribute copies of the software, or if you modify it.
+
+  For example, if you distribute copies of such a program, whether
+gratis or for a fee, you must give the recipients all the rights that
+you have.  You must make sure that they, too, receive or can get the
+source code.  And you must show them these terms so they know their
+rights.
+
+  We protect your rights with two steps: (1) copyright the software, and
+(2) offer you this license which gives you legal permission to copy,
+distribute and/or modify the software.
+
+  Also, for each author's protection and ours, we want to make certain
+that everyone understands that there is no warranty for this free
+software.  If the software is modified by someone else and passed on, we
+want its recipients to know that what they have is not the original, so
+that any problems introduced by others will not reflect on the original
+authors' reputations.
+
+  Finally, any free program is threatened constantly by software
+patents.  We wish to avoid the danger that redistributors of a free
+program will individually obtain patent licenses, in effect making the
+program proprietary.  To prevent this, we have made it clear that any
+patent must be licensed for everyone's free use or not licensed at all.
+
+  The precise terms and conditions for copying, distribution and
+modification follow.
+
+		    GNU GENERAL PUBLIC LICENSE
+   TERMS AND CONDITIONS FOR COPYING, DISTRIBUTION AND MODIFICATION
+
+  0. This License applies to any program or other work which contains
+a notice placed by the copyright holder saying it may be distributed
+under the terms of this General Public License.  The "Program", below,
+refers to any such program or work, and a "work based on the Program"
+means either the Program or any derivative work under copyright law:
+that is to say, a work containing the Program or a portion of it,
+either verbatim or with modifications and/or translated into another
+language.  (Hereinafter, translation is included without limitation in
+the term "modification".)  Each licensee is addressed as "you".
+
+Activities other than copying, distribution and modification are not
+covered by this License; they are outside its scope.  The act of
+running the Program is not restricted, and the output from the Program
+is covered only if its contents constitute a work based on the
+Program (independent of having been made by running the Program).
+Whether that is true depends on what the Program does.
+
+  1. You may copy and distribute verbatim copies of the Program's
+source code as you receive it, in any medium, provided that you
+conspicuously and appropriately publish on each copy an appropriate
+copyright notice and disclaimer of warranty; keep intact all the
+notices that refer to this License and to the absence of any warranty;
+and give any other recipients of the Program a copy of this License
+along with the Program.
+
+You may charge a fee for the physical act of transferring a copy, and
+you may at your option offer warranty protection in exchange for a fee.
+
+  2. You may modify your copy or copies of the Program or any portion
+of it, thus forming a work based on the Program, and copy and
+distribute such modifications or work under the terms of Section 1
+above, provided that you also meet all of these conditions:
+
+    a) You must cause the modified files to carry prominent notices
+    stating that you changed the files and the date of any change.
+
+    b) You must cause any work that you distribute or publish, that in
+    whole or in part contains or is derived from the Program or any
+    part thereof, to be licensed as a whole at no charge to all third
+    parties under the terms of this License.
+
+    c) If the modified program normally reads commands interactively
+    when run, you must cause it, when started running for such
+    interactive use in the most ordinary way, to print or display an
+    announcement including an appropriate copyright notice and a
+    notice that there is no warranty (or else, saying that you provide
+    a warranty) and that users may redistribute the program under
+    these conditions, and telling the user how to view a copy of this
+    License.  (Exception: if the Program itself is interactive but
+    does not normally print such an announcement, your work based on
+    the Program is not required to print an announcement.)
+
+These requirements apply to the modified work as a whole.  If
+identifiable sections of that work are not derived from the Program,
+and can be reasonably considered independent and separate works in
+themselves, then this License, and its terms, do not apply to those
+sections when you distribute them as separate works.  But when you
+distribute the same sections as part of a whole which is a work based
+on the Program, the distribution of the whole must be on the terms of
+this License, whose permissions for other licensees extend to the
+entire whole, and thus to each and every part regardless of who wrote it.
+
+Thus, it is not the intent of this section to claim rights or contest
+your rights to work written entirely by you; rather, the intent is to
+exercise the right to control the distribution of derivative or
+collective works based on the Program.
+
+In addition, mere aggregation of another work not based on the Program
+with the Program (or with a work based on the Program) on a volume of
+a storage or distribution medium does not bring the other work under
+the scope of this License.
+
+  3. You may copy and distribute the Program (or a work based on it,
+under Section 2) in object code or executable form under the terms of
+Sections 1 and 2 above provided that you also do one of the following:
+
+    a) Accompany it with the complete corresponding machine-readable
+    source code, which must be distributed under the terms of Sections
+    1 and 2 above on a medium customarily used for software interchange; or,
+
+    b) Accompany it with a written offer, valid for at least three
+    years, to give any third party, for a charge no more than your
+    cost of physically performing source distribution, a complete
+    machine-readable copy of the corresponding source code, to be
+    distributed under the terms of Sections 1 and 2 above on a medium
+    customarily used for software interchange; or,
+
+    c) Accompany it with the information you received as to the offer
+    to distribute corresponding source code.  (This alternative is
+    allowed only for noncommercial distribution and only if you
+    received the program in object code or executable form with such
+    an offer, in accord with Subsection b above.)
+
+The source code for a work means the preferred form of the work for
+making modifications to it.  For an executable work, complete source
+code means all the source code for all modules it contains, plus any
+associated interface definition files, plus the scripts used to
+control compilation and installation of the executable.  However, as a
+special exception, the source code distributed need not include
+anything that is normally distributed (in either source or binary
+form) with the major components (compiler, kernel, and so on) of the
+operating system on which the executable runs, unless that component
+itself accompanies the executable.
+
+If distribution of executable or object code is made by offering
+access to copy from a designated place, then offering equivalent
+access to copy the source code from the same place counts as
+distribution of the source code, even though third parties are not
+compelled to copy the source along with the object code.
+
+  4. You may not copy, modify, sublicense, or distribute the Program
+except as expressly provided under this License.  Any attempt
+otherwise to copy, modify, sublicense or distribute the Program is
+void, and will automatically terminate your rights under this License.
+However, parties who have received copies, or rights, from you under
+this License will not have their licenses terminated so long as such
+parties remain in full compliance.
+
+  5. You are not required to accept this License, since you have not
+signed it.  However, nothing else grants you permission to modify or
+distribute the Program or its derivative works.  These actions are
+prohibited by law if you do not accept this License.  Therefore, by
+modifying or distributing the Program (or any work based on the
+Program), you indicate your acceptance of this License to do so, and
+all its terms and conditions for copying, distributing or modifying
+the Program or works based on it.
+
+  6. Each time you redistribute the Program (or any work based on the
+Program), the recipient automatically receives a license from the
+original licensor to copy, distribute or modify the Program subject to
+these terms and conditions.  You may not impose any further
+restrictions on the recipients' exercise of the rights granted herein.
+You are not responsible for enforcing compliance by third parties to
+this License.
+
+  7. If, as a consequence of a court judgment or allegation of patent
+infringement or for any other reason (not limited to patent issues),
+conditions are imposed on you (whether by court order, agreement or
+otherwise) that contradict the conditions of this License, they do not
+excuse you from the conditions of this License.  If you cannot
+distribute so as to satisfy simultaneously your obligations under this
+License and any other pertinent obligations, then as a consequence you
+may not distribute the Program at all.  For example, if a patent
+license would not permit royalty-free redistribution of the Program by
+all those who receive copies directly or indirectly through you, then
+the only way you could satisfy both it and this License would be to
+refrain entirely from distribution of the Program.
+
+If any portion of this section is held invalid or unenforceable under
+any particular circumstance, the balance of the section is intended to
+apply and the section as a whole is intended to apply in other
+circumstances.
+
+It is not the purpose of this section to induce you to infringe any
+patents or other property right claims or to contest validity of any
+such claims; this section has the sole purpose of protecting the
+integrity of the free software distribution system, which is
+implemented by public license practices.  Many people have made
+generous contributions to the wide range of software distributed
+through that system in reliance on consistent application of that
+system; it is up to the author/donor to decide if he or she is willing
+to distribute software through any other system and a licensee cannot
+impose that choice.
+
+This section is intended to make thoroughly clear what is believed to
+be a consequence of the rest of this License.
+
+  8. If the distribution and/or use of the Program is restricted in
+certain countries either by patents or by copyrighted interfaces, the
+original copyright holder who places the Program under this License
+may add an explicit geographical distribution limitation excluding
+those countries, so that distribution is permitted only in or among
+countries not thus excluded.  In such case, this License incorporates
+the limitation as if written in the body of this License.
+
+  9. The Free Software Foundation may publish revised and/or new versions
+of the General Public License from time to time.  Such new versions will
+be similar in spirit to the present version, but may differ in detail to
+address new problems or concerns.
+
+Each version is given a distinguishing version number.  If the Program
+specifies a version number of this License which applies to it and "any
+later version", you have the option of following the terms and conditions
+either of that version or of any later version published by the Free
+Software Foundation.  If the Program does not specify a version number of
+this License, you may choose any version ever published by the Free Software
+Foundation.
+
+  10. If you wish to incorporate parts of the Program into other free
+programs whose distribution conditions are different, write to the author
+to ask for permission.  For software which is copyrighted by the Free
+Software Foundation, write to the Free Software Foundation; we sometimes
+make exceptions for this.  Our decision will be guided by the two goals
+of preserving the free status of all derivatives of our free software and
+of promoting the sharing and reuse of software generally.
+
+			    NO WARRANTY
+
+  11. BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY
+FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW.  EXCEPT WHEN
+OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES
+PROVIDE THE PROGRAM "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED
+OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.  THE ENTIRE RISK AS
+TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.  SHOULD THE
+PROGRAM PROVE DEFECTIVE, YOU ASSUME THE COST OF ALL NECESSARY SERVICING,
+REPAIR OR CORRECTION.
+
+  12. IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING
+WILL ANY COPYRIGHT HOLDER, OR ANY OTHER PARTY WHO MAY MODIFY AND/OR
+REDISTRIBUTE THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES,
+INCLUDING ANY GENERAL, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES ARISING
+OUT OF THE USE OR INABILITY TO USE THE PROGRAM (INCLUDING BUT NOT LIMITED
+TO LOSS OF DATA OR DATA BEING RENDERED INACCURATE OR LOSSES SUSTAINED BY
+YOU OR THIRD PARTIES OR A FAILURE OF THE PROGRAM TO OPERATE WITH ANY OTHER
+PROGRAMS), EVEN IF SUCH HOLDER OR OTHER PARTY HAS BEEN ADVISED OF THE
+POSSIBILITY OF SUCH DAMAGES.
+
+		     END OF TERMS AND CONDITIONS
+
+	    How to Apply These Terms to Your New Programs
+
+  If you develop a new program, and you want it to be of the greatest
+possible use to the public, the best way to achieve this is to make it
+free software which everyone can redistribute and change under these terms.
+
+  To do so, attach the following notices to the program.  It is safest
+to attach them to the start of each source file to most effectively
+convey the exclusion of warranty; and each file should have at least
+the "copyright" line and a pointer to where the full notice is found.
+
+    <one line to give the program's name and a brief idea of what it does.>
+    Copyright (C) <year>  <name of author>
+
+    This program is free software; you can redistribute it and/or modify
+    it under the terms of the GNU General Public License as published by
+    the Free Software Foundation; either version 2 of the License, or
+    (at your option) any later version.
+
+    This program is distributed in the hope that it will be useful,
+    but WITHOUT ANY WARRANTY; without even the implied warranty of
+    MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+    GNU General Public License for more details.
+
+    You should have received a copy of the GNU General Public License along
+    with this program; if not, write to the Free Software Foundation, Inc.,
+    51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+
+Also add information on how to contact you by electronic and paper mail.
+
+If the program is interactive, make it output a short notice like this
+when it starts in an interactive mode:
+
+    Gnomovision version 69, Copyright (C) year name of author
+    Gnomovision comes with ABSOLUTELY NO WARRANTY; for details type `show w'.
+    This is free software, and you are welcome to redistribute it
+    under certain conditions; type `show c' for details.
+
+The hypothetical commands `show w' and `show c' should show the appropriate
+parts of the General Public License.  Of course, the commands you use may
+be called something other than `show w' and `show c'; they could even be
+mouse-clicks or menu items--whatever suits your program.
+
+You should also get your employer (if you work as a programmer) or your
+school, if any, to sign a "copyright disclaimer" for the program, if
+necessary.  Here is a sample; alter the names:
+
+  Yoyodyne, Inc., hereby disclaims all copyright interest in the program
+  `Gnomovision' (which makes passes at compilers) written by James Hacker.
+
+  <signature of Ty Coon>, 1 April 1989
+  Ty Coon, President of Vice
+
+This General Public License does not permit incorporating your program into
+proprietary programs.  If your program is a subroutine library, you may
+consider it more useful to permit linking proprietary applications with the
+library.  If this is what you want to do, use the GNU Lesser General
+Public License instead of this License.

Config.in

@@ -1,6 +1,6 @@
 #
 
-mainmenu "Buildroot2 Configuration"
+mainmenu "Buildroot $BR2_VERSION Configuration"
 
 config BR2_HAVE_DOT_CONFIG
 	bool
@@ -8,28 +8,49 @@ config BR2_HAVE_DOT_CONFIG
 
 config BR2_VERSION
 	string
-	default "2009.02-svn"
+	option env="BR2_VERSION_FULL"
 
-source "target/Config.in.arch"
-source "target/device/Config.in"
+config BR2_HOSTARCH
+	string
+	option env="HOSTARCH"
+
+source "arch/Config.in"
 
 menu "Build options"
 
+menu "Commands"
+
 config BR2_WGET
 	string "Wget command"
-	default "wget --passive-ftp -nd"
+	default "wget --passive-ftp -nd -t 3"
 
-config BR2_SVN_CO
-	string "Subversion (svn) command to download source tree"
-	default "svn co"
+config BR2_SVN
+	string "Subversion (svn) command"
+	default "svn"
 
-config BR2_SVN_UP
-	string "Subversion (svn) command to update source tree"
-	default "svn up"
+config BR2_BZR
+	string "Bazaar (bzr) command"
+	default "bzr"
 
 config BR2_GIT
-	string "Git command to download source tree"
-	default "git clone"
+	string "Git command"
+	default "git"
+
+config BR2_LOCALFILES
+	string "Local files retrieval command"
+	default "cp"
+
+config BR2_SCP
+	string "Secure copy (scp) command"
+	default "scp"
+
+config BR2_SSH
+	string "Secure shell (ssh) command"
+	default "ssh"
+
+config BR2_HG
+	string "Mercurial (hg) command"
+	default "hg"
 
 config BR2_ZCAT
 	string "zcat command"
@@ -51,6 +72,13 @@ config BR2_BZCAT
 	  Default is "bzcat"
 	  Other possible values include "bunzip2 -c" or "bzip2 -d -c".
 
+config BR2_XZCAT
+	string "xzcat command"
+	default "xzcat"
+	help
+	  Command to be used to extract a xz'ed file to stdout.
+	  Default is "xzcat"
+
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
@@ -59,135 +87,150 @@ config BR2_TAR_OPTIONS
 	  E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
 	  and to be verbose.
 
+endmenu
+
 config BR2_DL_DIR
 	string "Download dir"
-	default "$(BASE_DIR)/dl"
+	default "$(TOPDIR)/dl"
 	help
 	  Directory to store all the source files that we need to fetch.
 	  If the Linux shell environment has defined the BUILDROOT_DL_DIR
 	  environment variable, then this overrides this configuration item.
 
-	  The default is $(BASE_DIR)/dl
+	  The default is $(TOPDIR)/dl
 
-config BR2_COPYTO
-	string "Copy result to..."
+config BR2_HOST_DIR
+	string "Host dir"
+	default "$(BASE_DIR)/host"
+	help
+	  Directory to store all the binary files that are built for the host.
+	  This includes the cross compilation toolchain when building the
+	  internal buildroot toolchain.
+
+	  The default is $(BASE_DIR)/host
+
+menu "Mirrors and Download locations"
+
+config BR2_PRIMARY_SITE
+	string "Primary download site"
 	default ""
 	help
-	  Setting this variable will (eventually) override 
-	  any other copyto configurations in buildroot.
+	  Primary site to download from. If this option is set then buildroot
+	  will try to download package source first from this site and try the
+	  default if the file is not found.
+	  Valid URIs are URIs recognized by $(WGET) and scp URIs of the form
+	  scp://[user@]host:path.
+	  NOTE: This works for all packages using the central package
+	  infrastructure (generic, autotools, cmake, ...)
 
-source	"target/device/Config.in.mirrors"
-
-config BR2_STAGING_DIR
-	string "Toolchain and header file location?"
-	default "$(BUILD_DIR)/staging_dir"
+config BR2_PRIMARY_SITE_ONLY
+	bool "Only allow downloads from primary download site"
+	depends on BR2_PRIMARY_SITE != ""
 	help
-	  This is the location where the toolchain will be installed.  The
-	  toolchain will not work if it is moved from this location.
-	  Therefore, if you wish to package up a uClibc toolchain, it is
-	  important that is is set to the final location where the toolchain
-	  will be used.
+	  If this option is enabled, downloads will only be attempted
+	  from the primary download site. Other locations, like the
+	  package's official download location or the backup download
+	  site, will not be considered. Therefore, if the package is
+	  not present on the primary site, the download fails.
 
-	  Most people will leave this set to the default value of
-	  "$(BUILD_DIR)/staging_dir".
+	  This is useful for project developers who want to ensure
+	  that the project can be built even if the upstream tarball
+	  locations disappear.
 
-config BR2_FPU_SUFFIX
-	bool "Add '_nofpu' suffix for softfloat toolchains"
+if !BR2_PRIMARY_SITE_ONLY
+
+config BR2_BACKUP_SITE
+	string "Backup download site"
+	default "http://sources.buildroot.net/"
 	help
-	  If the toolchain is configured to use softfloat, then
-	  the "_nofpu" suffix will be added to the toolchain build
-	  directory name and to any rootfs image name
+	  Backup site to download from. If this option is set then buildroot
+	  will fall back to download package sources from here if the
+	  normal location fails.
 
-config BR2_TOPDIR_PREFIX
-	string "Custom build dir prefix"
-	default ""
+config BR2_KERNEL_MIRROR
+	string "Kernel.org mirror"
+	default "http://www.kernel.org/pub/"
 	help
-	  Add a custom string to the beginning of the build directories.
+	  kernel.org is mirrored on a number of servers around the world.
+	  The following allows you to select your preferred mirror.
 
-	  build_ARCH -> [PREFIX]_build_ARCH
-	  toolchain_build_ARCH -> [PREFIX]_toolchain_build_ARCH
+	  Have a look on the kernel.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
 
-config BR2_TOPDIR_SUFFIX
-	string "Custom build dir suffix"
-	default ""
+	     http://www.XX.kernel.org/pub (XX = country code)
+	     http://mirror.aarnet.edu.au/pub/ftp.kernel.org
+
+config BR2_GNU_MIRROR
+	string "GNU Software mirror"
+	default "http://ftp.gnu.org/pub/gnu"
 	help
-	  Add a custom string to the end of the build directories.
+	  GNU has multiple software mirrors scattered around the world.
+	  The following allows you to select your preferred mirror.
 
-	  build_ARCH -> build_ARCH_[SUFFIX]
-	  toolchain_build_ARCH -> toolchain_build_ARCH_[SUFFIX]
+	  Have a look on the gnu.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
 
-config BR2_GNU_BUILD_SUFFIX
-	string "GNU build hostname suffix"
-	default "pc-linux-gnu"
+	     http://ftp.gnu.org/pub/gnu
+	     http://mirror.aarnet.edu.au/pub/gnu
+
+config BR2_DEBIAN_MIRROR
+	string "Debian Software mirror"
+	default "http://ftp.debian.org"
 	help
-	  The string used to pass to configure scripts via the
-	  --build= option.  Just specify the suffix here, the leading
-	  arch will be filled in automatically.
+	  Debian has multiple software mirrors scattered around the world.
+	  The following allows you to select your preferred mirror.
 
-	  Here's some copy and paste build host options for you:
-	      linux:   pc-linux-gnu
-	      cygwin:  pc-cygwin
-	      os x:    apple-darwin7 / apple-darwin8
+	  Usually, just add your country code like XX here:
+	  http://ftp.XX.debian.org
 
-config BR2_GNU_TARGET_SUFFIX
-	string "GNU target suffix"
-	default "linux-uclibcgnueabi" if BR2_ARM_EABI
-	default "linux-uclibc"
-	help
-	  The string used to pass to configure scripts via the
-	  --target= option.  Just specify the suffix here, the leading
-	  arch will be filled in automatically.
+endif
 
-	  Most users will want to stick with the default setting, though
-	  other users (most notably ARM EABI) like to add on to this in
-	  order to stay in line with gcc conventions.
-
-	  Default options are:
-	      linux-uclibcgnueabi for ARM EABI
-	      linux-uclibc for the rest
-	      gnuhurd-uclibc for the hurd
+endmenu
 
 config BR2_JLEVEL
-	int "Number of jobs to run simultaneously"
-	default "1"
+	int "Number of jobs to run simultaneously (0 for auto)"
+	default "0"
 	help
-	  Number of jobs to run simultaneously
+	  Number of jobs to run simultaneously.  If 0, determine
+	  automatically according to number of CPUs on the host
+	  system.
 
-config BR2_PREFER_IMA
-	bool "prefer IMA compiles"
+config BR2_CCACHE
+	bool "Enable compiler cache"
 	help
-	  Where possible, compile package with Inter Module Analysis.
-	  This potentially uses alot of system resources on your compile
-	  host with the benefit of creating smaller binaries for the target.
+	  This option will enable the use of ccache, a compiler
+	  cache. It will cache the result of previous builds to speed
+	  up future builds. The cache is stored in
+	  $HOME/.buildroot-ccache.
 
-	  If unsure, say No.
+	  Note that Buildroot does not try to invalidate the cache
+	  contents when the compiler changes in an incompatible
+	  way. Therefore, if you make a change to the compiler version
+	  and/or configuration, you are responsible for purging the
+	  ccache cache by removing the $HOME/.buildroot-ccache
+	  directory.
 
-	  WARNING: This is highly experimental at the moment.
+config BR2_CCACHE_DIR
+	string "Compiler cache location"
+	depends on BR2_CCACHE
+	default "$(HOME)/.buildroot-ccache"
+	help
+	  Where ccache should store cached files.
 
 config BR2_DEPRECATED
 	bool "Show packages that are deprecated or obsolete"
 	help
 	  This option hides outdated/obsolete versions of packages.
 
-config BR2_RECENT
-	bool "Show packages that are of the latest major version"
-	default y
-	help
-	  This option show recent versions of packages.
-
-config BR2_CONFIG_CACHE
-	bool "Use a central configure cache file"
-	help
-	  This determines if a central config cache is used by
-	  packages, reducing the configure time for packages as each
-	  one caches its findings.
-
 config BR2_ENABLE_DEBUG
 	bool "build packages with debugging symbols"
-	select BR2_PACKAGE_GDB_SERVER
 	help
-	  Build packages with debugging symbols
-	  enabled
+	  Build packages with debugging symbols enabled. All libraries
+	  and binaries in the 'staging' directory will have debugging
+	  symbols, which allows remote debugging even if libraries and
+	  binaries are stripped on the target. Whether libraries and
+	  binaries are stripped on the target is controlled by the
+	  BR2_STRIP_* options below.
 
 if BR2_ENABLE_DEBUG
 choice
@@ -220,34 +263,57 @@ endchoice
 endif
 
 choice
-	prompt "strip"
+	prompt "strip command for binaries on target"
 	default BR2_STRIP_strip
-	help
-	  Select whether to strip binaries and libraries for the target
-	  or not.
-	  strip   is the normal strip command
-	  sstrip  is a strip that discards more than the normal strip
-	  none    do not strip (only for debugging!)
 
 config BR2_STRIP_strip
 	bool "strip"
-	depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
+	depends on !BR2_ELF2FLT
 	help
-	  strip   is the normal strip command
+	  Binaries and libraries in the target filesystem will be
+	  stripped using the normal 'strip' command. This allows to
+	  save space, mainly by removing debugging symbols. Debugging
+	  symbols on the target are needed for native debugging, but
+	  not when remote debugging is used.
 
 config BR2_STRIP_sstrip
 	bool "sstrip"
 	select BR2_PACKAGE_SSTRIP_HOST
-	depends on !BR2_ENABLE_DEBUG && !BR2_ELF2FLT
+	depends on !BR2_ELF2FLT
 	help
-	  sstrip  is a strip that discards more than the normal strip
+	  Binaries and libraries in the target filesystem will be
+	  stripped using the 'sstrip' command, which strips a little
+	  bit more than the traditional 'strip' command. This allows to
+	  save space, mainly by removing debugging symbols. Debugging
+	  symbols on the target are needed for native debugging, but
+	  not when remote debugging is used.
 
 config BR2_STRIP_none
 	bool "none"
 	help
-	  none    do not strip (only for debugging!)
+	  Do not strip binaries and libraries in the target
+	  filesystem.
 endchoice
 
+config BR2_STRIP_EXCLUDE_FILES
+	string "executables that should not be stripped"
+	depends on !BR2_STRIP_none
+	default ""
+	help
+	  You may specify a space-separated list of binaries and libraries
+	  here that should not be stripped on the target.
+
+config BR2_STRIP_EXCLUDE_DIRS
+	string "directories that should be skipped when stripping"
+	depends on !BR2_STRIP_none
+	default ""
+	help
+	  You may specify a space-separated list of directories that should
+	  be skipped when stripping. Binaries and libraries in these
+	  directories will not be touched.
+	  The directories should be specified relative to the target directory,
+	  without leading slash.
+
 choice
 	prompt "gcc optimization level"
 	default BR2_OPTIMIZE_S
@@ -256,13 +322,11 @@ choice
 
 config BR2_OPTIMIZE_0
 	bool "optimization level 0"
-	depends on !BR2_PACKAGE_LINUX
 	help
 	  Do not optimize. This is the default.
 
 config BR2_OPTIMIZE_1
 	bool "optimization level 1"
-	depends on !BR2_PACKAGE_LINUX
 	help
 	  Optimize. Optimizing compilation takes somewhat more time,
 	  and a lot more memory for a large function. With -O, the
@@ -327,39 +391,48 @@ config BR2_PREFER_STATIC_LIB
 
 	  WARNING: This is highly experimental at the moment.
 
-config BR2_HAVE_MANPAGES
-	bool "manpages on the target"
-	help
-	  Leave the manpages on the target.
-	  If you say n here, your target will not contain any
-	  manpage.
-
-config BR2_HAVE_INFOPAGES
-	bool "infopages on the target"
-	help
-	  Leave the infopages on the target.
-	  If you say n here, your target will not contain any
-	  infopage.
-
 config BR2_HAVE_DOCUMENTATION
 	bool "documentation on the target"
+	# We no longer want to support a toolchain on the target
+	depends on BR2_DEPRECATED
 	help
-	  Leave the documentation on the target.
+	  Install the documentation, including manual pages and info
+	  pages, on the target.
 	  If you say n here, your target will not contain any
 	  documentation.
 
 config BR2_HAVE_DEVFILES
 	bool "development files in target filesystem"
+	# We no longer want to support a toolchain on the target
+	depends on BR2_DEPRECATED
 	help
 	  Install headers and static libraries in the
 	  target filesystem
 
-source package/gnuconfig/Config.in
+config BR2_PACKAGE_OVERRIDE_FILE
+	string "location of a package override file"
+	default "$(TOPDIR)/local.mk"
+	help
+	  A package override file is a short makefile that contains
+	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
+	  which allows to tell Buildroot to use an existing directory
+	  as the source directory for a particular package. See the
+	  Buildroot documentation for more details on this feature.
 
 endmenu
 
 source "toolchain/Config.in"
 
+source "system/Config.in"
+
 source "package/Config.in"
 
-source "target/Config.in"
+source "package/Config.in.host"
+
+source "fs/Config.in"
+
+source "boot/Config.in"
+
+source "linux/Config.in"
+
+source "Config.in.legacy"

Config.in.legacy

@@ -0,0 +1,73 @@
+#
+# Config.in.legacy - support for backward compatibility
+#
+# When an existing Config.in symbol is removed, it should be added again in this
+# file, and take appropriate action to approximate backward compatibility. If
+# there is an equivalent (set of) new symbols, these can just be select'ed by
+# the old symbol. This makes sure that running 'make oldconfig' will make things
+# "just work" when upgrading to a new buildroot version. If the change is too
+# fundamental and cannot be fixed by a simple select, then the old symbol should
+# select BR2_LEGACY.  If that symbol is set, the build will issue an error.
+#
+# When adding legacy symbols to this file, add them to the front. The oldest
+# symbols will be removed again after about two years.
+#
+# The symbol should be copied as-is from the place where it was previously
+# defined, but the help text should be removed or replaced with something that
+# explains how to fix it.
+
+config BR2_LEGACY
+	bool
+	help
+	  This option is selected automatically when your old .config uses an
+	  option that no longer exists in current buildroot. In that case, the
+	  build will fail. Look for config options which are selected in the
+	  menu below: they no longer exist and should be replaced by something
+	  else.
+
+# This comment fits exactly in a 80-column display
+comment "Legacy detected: check the content of the menu below"
+	depends on BR2_LEGACY
+
+# This option should get a new name with every buildroot release, so it defaults
+# to y again for people who upgrade.
+menuconfig BR2_LEGACY_CHECK_2012_11
+	bool "Check for legacy config options"
+	default y
+	help
+	  Select this option to see the config options that are present in your
+	  current .config but are no longer supported by buildroot. If any of
+	  the options in this menu is selected, they should be replaced with
+	  something else. As long as they stay selected, the build will fail.
+	  Just de-select this option to automatically remove all the legacy
+	  configuration.
+
+if BR2_LEGACY_CHECK_2012_11
+
+#
+# Legacy options from 2012.08
+#
+
+config BR2_PACKAGE_GETTEXT_STATIC
+	bool "libgettext.a is now selected by BR2_PREFER_STATIC_LIB"
+	select BR2_LEGACY
+	help
+	  To build a static gettext library, select BR2_PREFER_STATIC_LIB.
+
+
+config BR2_PACKAGE_LIBINTL
+	bool "libintl"
+	select BR2_LEGACY
+	select BR2_PACKAGE_GETTEXT
+	help
+	  libintl is now installed by selecting BR2_PACKAGE_GETTEXT. This now
+	  only installs the library, not the executables.
+
+config BR2_PACKAGE_INPUT_TOOLS_EVTEST
+	bool "input-tools evtest is now a separate package evtest"
+	select BR2_LEGACY
+	select BR2_PACKAGE_EVTEST
+	help
+	  The evtest program from input-tools is now a separate package.
+
+endif

Makefile

@@ -1,7 +1,7 @@
 # Makefile for buildroot2
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
-# Copyright (C) 2006-2009 by the Buildroot developers <buildroot@uclibc.org>
+# Copyright (C) 2006-2012 by the Buildroot developers <buildroot@uclibc.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -22,46 +22,79 @@
 # Just run 'make menuconfig', configure stuff, then run 'make'.
 # You shouldn't need to mess with anything beyond this point...
 #--------------------------------------------------------------
-TOPDIR=./
+
+# Set and export the version string
+export BR2_VERSION:=2012.11-rc2
+
+# Check for minimal make version (note: this check will break at make 10.x)
+MIN_MAKE_VERSION=3.81
+ifneq ($(firstword $(sort $(MAKE_VERSION) $(MIN_MAKE_VERSION))),$(MIN_MAKE_VERSION))
+$(error You have make '$(MAKE_VERSION)' installed. GNU make >= $(MIN_MAKE_VERSION) is required)
+endif
+
+export HOSTARCH := $(shell uname -m | \
+	sed -e s/i.86/x86/ \
+	    -e s/sun4u/sparc64/ \
+	    -e s/arm.*/arm/ \
+	    -e s/sa110/arm/ \
+	    -e s/ppc64/powerpc/ \
+	    -e s/ppc/powerpc/ \
+	    -e s/macppc/powerpc/\
+	    -e s/sh.*/sh/)
+
+# This top-level Makefile can *not* be executed in parallel
+.NOTPARALLEL:
+
+# absolute path
+TOPDIR:=$(shell pwd)
 CONFIG_CONFIG_IN=Config.in
-CONFIG_DEFCONFIG=.defconfig
-CONFIG=package/config
+CONFIG=support/kconfig
 DATE:=$(shell date +%Y%m%d)
 
-noconfig_targets:=menuconfig config oldconfig randconfig \
-	defconfig allyesconfig allnoconfig release tags \
-	source-check help
+# Compute the full local version string so packages can use it as-is
+# Need to export it, so it can be got from environment in children (eg. mconf)
+export BR2_VERSION_FULL:=$(BR2_VERSION)$(shell $(TOPDIR)/support/scripts/setlocalversion)
 
+noconfig_targets:=menuconfig nconfig gconfig xconfig config oldconfig randconfig \
+	defconfig %_defconfig savedefconfig allyesconfig allnoconfig silentoldconfig release \
+	randpackageconfig allyespackageconfig allnopackageconfig \
+	source-check print-version
 
-# Use shell variables, if defined
-ifneq ($(BUILDROOT_LOCAL),)
-BR2_LOCAL:=$(BUILDROOT_LOCAL)
-else
-BR2_LOCAL:=$(TOPDIR)/local
-endif
+# Strip quotes and then whitespaces
+qstrip=$(strip $(subst ",,$(1)))
+#"))
 
 # Variables for use in Make constructs
 comma:=,
 empty:=
 space:=$(empty) $(empty)
 
-# $(shell find . -name *_defconfig |sed 's/.*\///')
-# Pull in the user's configuration file
-ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
-ifeq ($(BOARD),)
-# if "make BOARD=xyz" command
--include .config
+ifneq ("$(origin O)", "command line")
+O:=output
+CONFIG_DIR:=$(TOPDIR)
+NEED_WRAPPER=
 else
-# if "make" command
--include $(BR2_LOCAL)/$(BOARD)/$(BOARD).config
-endif
+# other packages might also support Linux-style out of tree builds
+# with the O=<dir> syntax (E.G. Busybox does). As make automatically
+# forwards command line variable definitions those packages get very
+# confused. Fix this by telling make to not do so
+MAKEOVERRIDES =
+# strangely enough O is still passed to submakes with MAKEOVERRIDES
+# (with make 3.81 atleast), the only thing that changes is the output
+# of the origin function (command line -> environment).
+# Unfortunately some packages don't look at origin (E.G. uClibc 0.9.31+)
+# To really make O go away, we have to override it.
+override O:=$(O)
+CONFIG_DIR:=$(O)
+# we need to pass O= everywhere we call back into the toplevel makefile
+EXTRAMAKEARGS = O=$(O)
+NEED_WRAPPER=y
 endif
 
-# Override BR2_DL_DIR if shell variable defined
-ifneq ($(BUILDROOT_DL_DIR),)
-BR2_DL_DIR:=$(BUILDROOT_DL_DIR)
+# Pull in the user's configuration file
+ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
+-include $(CONFIG_DIR)/.config
 endif
-LOCAL:=$(BR2_LOCAL)
 
 # To put more focus on warnings, be less verbose as default
 # Use 'make V=1' to see the full commands
@@ -103,11 +136,14 @@ HOSTAS:=as
 endif
 ifndef HOSTCC
 HOSTCC:=gcc
-else
+HOSTCC:=$(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
 endif
+HOSTCC_NOCCACHE:=$(HOSTCC)
 ifndef HOSTCXX
 HOSTCXX:=g++
+HOSTCXX:=$(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
 endif
+HOSTCXX_NOCCACHE:=$(HOSTCXX)
 ifndef HOSTFC
 HOSTFC:=gfortran
 endif
@@ -125,35 +161,35 @@ HOSTNM:=nm
 endif
 HOSTAR:=$(shell which $(HOSTAR) || type -p $(HOSTAR) || echo ar)
 HOSTAS:=$(shell which $(HOSTAS) || type -p $(HOSTAS) || echo as)
-HOSTCC:=$(shell which $(HOSTCC) || type -p $(HOSTCC) || echo gcc)
-HOSTCXX:=$(shell which $(HOSTCXX) || type -p $(HOSTCXX) || echo g++)
 HOSTFC:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo || which g77 || type -p g77 || echo gfortran)
 HOSTCPP:=$(shell which $(HOSTCPP) || type -p $(HOSTCPP) || echo cpp)
 HOSTLD:=$(shell which $(HOSTLD) || type -p $(HOSTLD) || echo ld)
 HOSTLN:=$(shell which $(HOSTLN) || type -p $(HOSTLN) || echo ln)
 HOSTNM:=$(shell which $(HOSTNM) || type -p $(HOSTNM) || echo nm)
 
-ifndef CFLAGS_FOR_BUILD
-CFLAGS_FOR_BUILD:=-g -O2
-endif
-ifndef CXXFLAGS_FOR_BUILD
-CXXFLAGS_FOR_BUILD:=-g -O2
-endif
-ifndef FCFLAGS_FOR_BUILD
-FCFLAGS_FOR_BUILD:=-g -O2
-endif
 export HOSTAR HOSTAS HOSTCC HOSTCXX HOSTFC HOSTLD
+export HOSTCC_NOCCACHE HOSTCXX_NOCCACHE
+
+# Make sure pkg-config doesn't look outside the buildroot tree
+unexport PKG_CONFIG_PATH
+
+# Having DESTDIR set in the environment confuses the installation
+# steps of some packages.
+unexport DESTDIR
+
+# bash prints the name of the directory on 'cd <dir>' if CDPATH is
+# set, so unset it here to not cause problems. Notice that the export
+# line doesn't affect the environment of $(shell ..) calls, so
+# explictly throw away any output from 'cd' here.
+export CDPATH:=
+BASE_DIR := $(shell mkdir -p $(O) && cd $(O) >/dev/null && pwd)
+$(if $(BASE_DIR),, $(error output directory "$(O)" does not exist))
+
+BUILD_DIR:=$(BASE_DIR)/build
 
 
 ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
-# cc-option
-# Usage: cflags-y+=$(call cc-option, -march=winchip-c6, -march=i586)
-# sets -march=winchip-c6 if supported else falls back to -march=i586
-# without checking the latter.
-cc-option=$(shell if $(TARGET_CC) $(TARGET_CFLAGS) $(1) -S -o /dev/null -xc /dev/null \
-	> /dev/null 2>&1; then echo "$(1)"; else echo "$(2)"; fi ;)
-
 #############################################################
 #
 # Hide troublesome environment variables from sub processes
@@ -161,44 +197,16 @@ cc-option=$(shell if $(TARGET_CC) $(TARGET_CFLAGS) $(1) -S -o /dev/null -xc /dev
 #############################################################
 unexport CROSS_COMPILE
 unexport ARCH
+unexport CC
+unexport CXX
+unexport CPP
+unexport CFLAGS
+unexport CXXFLAGS
+unexport GREP_OPTIONS
+unexport CONFIG_SITE
+unexport QMAKESPEC
 
-#############################################################
-#
-# Setup the proper filename extensions for the host
-#
-##############################################################
-ifneq ($(findstring linux,$(BR2_GNU_BUILD_SUFFIX)),)
-HOST_EXEEXT:=
-HOST_LIBEXT:=.a
-HOST_SHREXT:=.so
-endif
-ifneq ($(findstring apple,$(BR2_GNU_BUILD_SUFFIX)),)
-HOST_EXEEXT:=
-HOST_LIBEXT:=.a
-HOST_SHREXT:=.dylib
-endif
-ifneq ($(findstring cygwin,$(BR2_GNU_BUILD_SUFFIX)),)
-HOST_EXEEXT:=.exe
-HOST_LIBEXT:=.lib
-HOST_SHREXT:=.dll
-HOST_LOADLIBES="-lcurses -lintl"
-export HOST_LOADLIBES
-endif
-ifneq ($(findstring mingw,$(BR2_GNU_BUILD_SUFFIX)),)
-HOST_EXEEXT:=.exe
-HOST_LIBEXT:=.lib
-HOST_SHREXT:=.dll
-endif
-
-# The preferred type of libs we build for the target
-ifeq ($(BR2_PREFER_STATIC_LIB),y)
-LIBTGTEXT=.a
-#PREFERRED_LIB_FLAGS:=--disable-shared --enable-static
-else
-LIBTGTEXT=.so
-#PREFERRED_LIB_FLAGS:=--disable-static --enable-shared
-endif
-PREFERRED_LIB_FLAGS:=--enable-static --enable-shared
+GNU_HOST_NAME:=$(shell support/gnuconfig/config.guess)
 
 ##############################################################
 #
@@ -206,20 +214,72 @@ PREFERRED_LIB_FLAGS:=--enable-static --enable-shared
 # along with the packages to build for the target.
 #
 ##############################################################
-ifeq ($(BR2_TOOLCHAIN_SOURCE),y)
-BASE_TARGETS:=uclibc-configured binutils cross_compiler uclibc-target-utils kernel-headers
+
+ifeq ($(BR2_CCACHE),y)
+BASE_TARGETS += host-ccache
+endif
+
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+BASE_TARGETS += uclibc-configured host-binutils cross_compiler uclibc-target-utils kernel-headers
 else
-BASE_TARGETS:=uclibc
+BASE_TARGETS += uclibc
 endif
 TARGETS:=
 
-# setup our paths
-include project/Makefile.in
+# silent mode requested?
+QUIET:=$(if $(findstring s,$(MAKEFLAGS)),-q)
 
-BR2_DEPENDS_DIR=$(PROJECT_BUILD_DIR)/buildroot-config
+# Strip off the annoying quoting
+ARCH:=$(call qstrip,$(BR2_ARCH))
 
-include toolchain/Makefile.in
-include package/Makefile.in
+KERNEL_ARCH:=$(shell echo "$(ARCH)" | sed -e "s/-.*//" \
+	-e s/i.86/i386/ -e s/sun4u/sparc64/ \
+	-e s/arm.*/arm/ -e s/sa110/arm/ \
+	-e s/aarch64/arm64/ \
+	-e s/bfin/blackfin/ \
+	-e s/parisc64/parisc/ \
+	-e s/powerpc64/powerpc/ \
+	-e s/ppc.*/powerpc/ -e s/mips.*/mips/ \
+	-e s/sh.*/sh/)
+
+ZCAT:=$(call qstrip,$(BR2_ZCAT))
+BZCAT:=$(call qstrip,$(BR2_BZCAT))
+XZCAT:=$(call qstrip,$(BR2_XZCAT))
+TAR_OPTIONS=$(call qstrip,$(BR2_TAR_OPTIONS)) -xf
+
+# packages compiled for the host go here
+HOST_DIR:=$(call qstrip,$(BR2_HOST_DIR))
+
+# locales to generate
+GENERATE_LOCALE=$(call qstrip,$(BR2_GENERATE_LOCALE))
+
+# stamp (dependency) files go here
+STAMP_DIR:=$(BASE_DIR)/stamps
+
+BINARIES_DIR:=$(BASE_DIR)/images
+TARGET_DIR:=$(BASE_DIR)/target
+TOOLCHAIN_DIR=$(BASE_DIR)/toolchain
+TARGET_SKELETON=$(TOPDIR)/system/skeleton
+
+LEGAL_INFO_DIR=$(BASE_DIR)/legal-info
+REDIST_SOURCES_DIR=$(LEGAL_INFO_DIR)/sources
+LICENSE_FILES_DIR=$(LEGAL_INFO_DIR)/licenses
+LEGAL_MANIFEST_CSV=$(LEGAL_INFO_DIR)/manifest.csv
+LEGAL_LICENSES_TXT=$(LEGAL_INFO_DIR)/licenses.txt
+LEGAL_WARNINGS=$(LEGAL_INFO_DIR)/.warnings
+LEGAL_REPORT=$(LEGAL_INFO_DIR)/README
+
+# Location of a file giving a big fat warning that output/target
+# should not be used as the root filesystem.
+TARGET_DIR_WARNING_FILE=$(TARGET_DIR)/THIS_IS_NOT_YOUR_ROOT_FILESYSTEM
+
+ifeq ($(BR2_CCACHE),y)
+CCACHE:=$(HOST_DIR)/usr/bin/ccache
+BUILDROOT_CACHE_DIR = $(call qstrip,$(BR2_CCACHE_DIR))
+export BUILDROOT_CACHE_DIR
+HOSTCC  := $(CCACHE) $(HOSTCC)
+HOSTCXX := $(CCACHE) $(HOSTCXX)
+endif
 
 #############################################################
 #
@@ -230,72 +290,100 @@ include package/Makefile.in
 
 all: world
 
-# In this section, we need .config
-include .config.cmd
+# Include legacy before the other things, because package .mk files
+# may rely on it.
+ifneq ($(BR2_DEPRECATED),y)
+include Makefile.legacy
+endif
 
-include project/*.mk
+include package/Makefile.in
+include support/dependencies/dependencies.mk
 
 # We also need the various per-package makefiles, which also add
 # each selected package to TARGETS if that package was selected
 # in the .config file.
-ifeq ($(BR2_TOOLCHAIN_SOURCE),y)
-# avoid pulling in external toolchain which is broken for toplvl parallel builds
-# Explicit ordering:
-include toolchain/dependencies/dependencies.mk
-include toolchain/binutils/binutils.mk
-include toolchain/ccache/ccache.mk
-include toolchain/elf2flt/elf2flt.mk
-include toolchain/gcc/gcc-uclibc-3.x.mk
-include toolchain/gcc/gcc-uclibc-4.x.mk
-include toolchain/gdb/gdb.mk
-include toolchain/kernel-headers/kernel-headers.mk
-include toolchain/mklibs/mklibs.mk
-include toolchain/sstrip/sstrip.mk
-include toolchain/uClibc/uclibc.mk
-else
-include toolchain/*/*.mk
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+include toolchain/toolchain-buildroot.mk
+else ifeq ($(BR2_TOOLCHAIN_EXTERNAL),y)
+include toolchain/toolchain-external.mk
+else ifeq ($(BR2_TOOLCHAIN_CTNG),y)
+include toolchain/toolchain-crosstool-ng.mk
 endif
 
-ifeq ($(BR2_PACKAGE_LINUX),y)
-TARGETS+=linux26-modules
+# Include the package override file if one has been provided in the
+# configuration.
+PACKAGE_OVERRIDE_FILE=$(call qstrip,$(BR2_PACKAGE_OVERRIDE_FILE))
+ifneq ($(PACKAGE_OVERRIDE_FILE),)
+-include $(PACKAGE_OVERRIDE_FILE)
 endif
 
 include package/*/*.mk
 
-TARGETS+=target-devfiles
+include boot/common.mk
+include linux/linux.mk
 
-# target stuff is last so it can override anything else
-include target/Makefile.in
+TARGETS+=target-finalize
 
-TARGETS+=erase-fakeroots
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+TARGETS+=target-purgelocales
+endif
+
+ifneq ($(BR2_TOOLCHAIN_EXTERNAL_GLIBC)$(BR2_TOOLCHAIN_CTNG_eglibc)$(BR2_TOOLCHAIN_CTNG_glibc),)
+ifneq ($(GENERATE_LOCALE),)
+TARGETS+=target-generatelocales
+endif
+endif
+
+include system/system.mk
+include fs/common.mk
 
 TARGETS_CLEAN:=$(patsubst %,%-clean,$(TARGETS))
 TARGETS_SOURCE:=$(patsubst %,%-source,$(TARGETS) $(BASE_TARGETS))
 TARGETS_DIRCLEAN:=$(patsubst %,%-dirclean,$(TARGETS))
 TARGETS_ALL:=$(patsubst %,__real_tgt_%,$(TARGETS))
+
+# host-* dependencies have to be handled specially, as those aren't
+# visible in Kconfig and hence not added to a variable like TARGETS.
+# instead, find all the host-* targets listed in each <PKG>_DEPENDENCIES
+# variable for each enabled target.
+# Notice: this only works for newstyle gentargets/autotargets packages
+TARGETS_HOST_DEPS = $(sort $(filter host-%,$(foreach dep,\
+		$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS))),\
+		$($(dep)))))
+# Host packages can in turn have their own dependencies. Likewise find
+# all the package names listed in the HOST_<PKG>_DEPENDENCIES for each
+# host package found above. Ideally this should be done recursively until
+# no more packages are found, but that's hard to do in make, so limit to
+# 1 level for now.
+HOST_DEPS = $(sort $(foreach dep,\
+		$(addsuffix _DEPENDENCIES,$(call UPPERCASE,$(TARGETS_HOST_DEPS))),\
+		$($(dep))))
+HOST_SOURCE += $(addsuffix -source,$(sort $(TARGETS_HOST_DEPS) $(HOST_DEPS)))
+
+TARGETS_LEGAL_INFO:=$(patsubst %,%-legal-info,\
+		$(TARGETS) $(BASE_TARGETS) $(TARGETS_HOST_DEPS) $(HOST_DEPS))))
+
 # all targets depend on the crosscompiler and it's prerequisites
 $(TARGETS_ALL): __real_tgt_%: $(BASE_TARGETS) %
 
-$(BR2_DEPENDS_DIR): .config
-	rm -rf $@
-	mkdir -p $(@D)
-	cp -dpRf $(CONFIG)/buildroot-config $@
+dirs: $(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
+	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
-dirs: $(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
-	$(BR2_DEPENDS_DIR) $(BINARIES_DIR) $(PROJECT_BUILD_DIR) \
-	$(PROJECT_BUILD_DIR)/autotools-stamps
+$(BASE_TARGETS): dirs $(HOST_DIR)/usr/share/buildroot/toolchainfile.cmake
 
-$(BASE_TARGETS): dirs
+$(BUILD_DIR)/buildroot-config/auto.conf: $(CONFIG_DIR)/.config
+	$(MAKE) $(EXTRAMAKEARGS) HOSTCC="$(HOSTCC_NOCCACHE)" HOSTCXX="$(HOSTCXX_NOCCACHE)" silentoldconfig
 
-world: dependencies dirs target-host-info $(BASE_TARGETS) $(TARGETS_ALL)
+prepare: $(BUILD_DIR)/buildroot-config/auto.conf
 
+world: prepare dirs dependencies $(BASE_TARGETS) $(TARGETS_ALL)
 
-.PHONY: all world dirs clean dirclean distclean source \
+.PHONY: all world dirs clean distclean source outputmakefile \
+	legal-info legal-info-prepare legal-info-clean \
 	$(BASE_TARGETS) $(TARGETS) $(TARGETS_ALL) \
-	$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) \
-	$(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
-	$(BR2_DEPENDS_DIR) $(BINARIES_DIR) $(PROJECT_BUILD_DIR) \
-	$(PROJECT_BUILD_DIR)/autotools-stamps
+	$(TARGETS_CLEAN) $(TARGETS_DIRCLEAN) $(TARGETS_SOURCE) $(TARGETS_LEGAL_INFO) \
+	$(TOOLCHAIN_DIR) $(BUILD_DIR) $(STAGING_DIR) $(TARGET_DIR) \
+	$(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR)
 
 #############################################################
 #
@@ -303,90 +391,174 @@ world: dependencies dirs target-host-info $(BASE_TARGETS) $(TARGETS_ALL)
 # dependencies anywhere else
 #
 #############################################################
-$(DL_DIR) $(TOOL_BUILD_DIR) $(BUILD_DIR) $(PROJECT_BUILD_DIR) \
-	$(PROJECT_BUILD_DIR)/autotools-stamps $(BINARIES_DIR):
+$(TOOLCHAIN_DIR) $(BUILD_DIR) $(HOST_DIR) $(BINARIES_DIR) $(STAMP_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR):
 	@mkdir -p $@
 
 $(STAGING_DIR):
 	@mkdir -p $(STAGING_DIR)/bin
 	@mkdir -p $(STAGING_DIR)/lib
-ifeq ($(BR2_TOOLCHAIN_SYSROOT),y)
 	@mkdir -p $(STAGING_DIR)/usr/lib
-else
-ifneq ($(BR2_TOOLCHAIN_EXTERNAL),y)
-	@ln -snf . $(STAGING_DIR)/usr
-	@mkdir -p $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)
-	@ln -snf ../lib $(STAGING_DIR)/usr/lib
-	@ln -snf ../lib $(STAGING_DIR)/usr/$(REAL_GNU_TARGET_NAME)/lib
-endif
-endif
 	@mkdir -p $(STAGING_DIR)/usr/include
+	@mkdir -p $(STAGING_DIR)/usr/bin
+	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging
 
-$(PROJECT_BUILD_DIR)/.root:
+ifeq ($(BR2_ROOTFS_SKELETON_CUSTOM),y)
+TARGET_SKELETON=$(BR2_ROOTFS_SKELETON_CUSTOM_PATH)
+endif
+
+$(BUILD_DIR)/.root:
 	mkdir -p $(TARGET_DIR)
 	if ! [ -d "$(TARGET_DIR)/bin" ]; then \
 		if [ -d "$(TARGET_SKELETON)" ]; then \
 			cp -fa $(TARGET_SKELETON)/* $(TARGET_DIR)/; \
 		fi; \
-		touch $(STAGING_DIR)/.fakeroot.00000; \
 	fi
-	-find $(TARGET_DIR) -type d -name CVS -o -name .svn | xargs rm -rf
-	-find $(TARGET_DIR) -type f -name .empty | xargs rm -rf	
+	cp support/misc/target-dir-warning.txt $(TARGET_DIR_WARNING_FILE)
+	-find $(TARGET_DIR) -type d -name CVS -print0 -o -name .svn -print0 | xargs -0 rm -rf
+	-find $(TARGET_DIR) -type f \( -name .empty -o -name '*~' \) -print0 | xargs -0 rm -rf
 	touch $@
 
-$(TARGET_DIR): $(PROJECT_BUILD_DIR)/.root
+$(TARGET_DIR): $(BUILD_DIR)/.root
 
-erase-fakeroots:
-	rm -f $(PROJECT_BUILD_DIR)/.fakeroot*
+STRIP_FIND_CMD = find $(TARGET_DIR)
+ifneq (,$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS)))
+STRIP_FIND_CMD += \( $(call finddirclauses,$(TARGET_DIR),$(call qstrip,$(BR2_STRIP_EXCLUDE_DIRS))) \) -prune -o
+endif
+STRIP_FIND_CMD += -type f -perm +111
+STRIP_FIND_CMD += -not \( $(call findfileclauses,libpthread*.so* $(call qstrip,$(BR2_STRIP_EXCLUDE_FILES))) \) -print
 
-target-devfiles:
+target-finalize:
 ifeq ($(BR2_HAVE_DEVFILES),y)
-	( scripts/copy.sh $(STAGING_DIR) $(TARGET_DIR) )
+	( support/scripts/copy.sh $(STAGING_DIR) $(TARGET_DIR) )
 else
-	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/lib/pkgconfig
-	find $(TARGET_DIR)/usr/lib -name '*.a' -delete
-	find $(TARGET_DIR)/lib -name '*.a' -delete
-	find $(TARGET_DIR)/usr/lib -name '*.la' -delete
-	find $(TARGET_DIR)/lib -name '*.la' -delete
+	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
+		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig
+	find $(TARGET_DIR)/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
+	find $(TARGET_DIR)/usr/lib \( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
+endif
+ifneq ($(BR2_PACKAGE_GDB),y)
+	rm -rf $(TARGET_DIR)/usr/share/gdb
+endif
+ifneq ($(BR2_HAVE_DOCUMENTATION),y)
+	rm -rf $(TARGET_DIR)/usr/man $(TARGET_DIR)/usr/share/man
+	rm -rf $(TARGET_DIR)/usr/info $(TARGET_DIR)/usr/share/info
+	rm -rf $(TARGET_DIR)/usr/doc $(TARGET_DIR)/usr/share/doc
+	rm -rf $(TARGET_DIR)/usr/share/gtk-doc
+	-rmdir $(TARGET_DIR)/usr/share 2>/dev/null
+endif
+ifeq ($(BR2_PACKAGE_PYTHON_PY_ONLY),y)
+	find $(TARGET_DIR)/usr/lib/ -name '*.pyc' -print0 | xargs -0 rm -f
+endif
+ifeq ($(BR2_PACKAGE_PYTHON_PYC_ONLY),y)
+	find $(TARGET_DIR)/usr/lib/ -name '*.py' -print0 | xargs -0 rm -f
+endif
+	$(STRIP_FIND_CMD) | xargs $(STRIPCMD) 2>/dev/null || true
+	find $(TARGET_DIR)/lib/modules -type f -name '*.ko' | \
+		xargs -r $(KSTRIPCMD) || true
+
+# See http://sourceware.org/gdb/wiki/FAQ, "GDB does not see any threads
+# besides the one in which crash occurred; or SIGTRAP kills my program when
+# I set a breakpoint"
+ifeq ($(BR2_TOOLCHAIN_HAS_THREADS),y)
+	find $(TARGET_DIR)/lib -type f -name 'libpthread*.so*' | \
+		xargs $(STRIPCMD) $(STRIP_STRIP_DEBUG) || true
 endif
 
-source: $(TARGETS_SOURCE) $(HOST_SOURCE)
+	mkdir -p $(TARGET_DIR)/etc
+	# Mandatory configuration file and auxilliary cache directory
+	# for recent versions of ldconfig
+	touch $(TARGET_DIR)/etc/ld.so.conf
+	mkdir -p $(TARGET_DIR)/var/cache/ldconfig
+	if [ -x "$(TARGET_CROSS)ldconfig" ]; \
+	then \
+		$(TARGET_CROSS)ldconfig -r $(TARGET_DIR); \
+	else \
+		/sbin/ldconfig -r $(TARGET_DIR); \
+	fi
+	( \
+		echo "NAME=Buildroot"; \
+		echo "VERSION=$(BR2_VERSION_FULL)"; \
+		echo "ID=buildroot"; \
+		echo "VERSION_ID=$(BR2_VERSION)"; \
+		echo "PRETTY_NAME=\"Buildroot $(BR2_VERSION)\"" \
+	) >  $(TARGET_DIR)/etc/os-release
 
-_source-check:
-	$(MAKE) SPIDER=--spider source
+ifneq ($(BR2_ROOTFS_POST_BUILD_SCRIPT),"")
+	@$(call MESSAGE,"Executing post-build script\(s\)")
+	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
+		$(s) $(TARGET_DIR)$(sep))
+endif
+
+ifeq ($(BR2_ENABLE_LOCALE_PURGE),y)
+LOCALE_WHITELIST=$(BUILD_DIR)/locales.nopurge
+LOCALE_NOPURGE=$(call qstrip,$(BR2_ENABLE_LOCALE_WHITELIST))
+
+target-purgelocales:
+	rm -f $(LOCALE_WHITELIST)
+	for i in $(LOCALE_NOPURGE); do echo $$i >> $(LOCALE_WHITELIST); done
+
+	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/man /usr/share/man)); \
+	do \
+		for lang in $$(cd $$dir; ls .|grep -v man); \
+		do \
+			grep -qx $$lang $(LOCALE_WHITELIST) || rm -rf $$dir/$$lang; \
+		done; \
+	done
+endif
+
+ifneq ($(GENERATE_LOCALE),)
+# Generate locale data. Basically, we call the localedef program
+# (built by the host-localedef package) for each locale. The input
+# data comes preferably from the toolchain, or if the toolchain does
+# not have them (Linaro toolchains), we use the ones available on the
+# host machine.
+target-generatelocales: host-localedef
+	$(Q)mkdir -p $(TARGET_DIR)/usr/lib/locale/
+	$(Q)for locale in $(GENERATE_LOCALE) ; do \
+		inputfile=`echo $${locale} | cut -f1 -d'.'` ; \
+		charmap=`echo $${locale} | cut -f2 -d'.'` ; \
+		if test -z "$${charmap}" ; then \
+			charmap="UTF-8" ; \
+		fi ; \
+		echo "Generating locale $${inputfile}.$${charmap}" ; \
+		I18NPATH=$(STAGING_DIR)/usr/share/i18n:/usr/share/i18n \
+		$(HOST_DIR)/usr/bin/localedef \
+			--prefix=$(TARGET_DIR) \
+			--`echo $(BR2_ENDIAN) | tr [A-Z] [a-z]`-endian \
+			-i $${inputfile} -f $${charmap} \
+			$${locale} ; \
+	done
+endif
+
+source: dirs $(TARGETS_SOURCE) $(HOST_SOURCE)
 
 external-deps:
-	@$(MAKE) -Bs BR2_WGET=$(TOPDIR)/toolchain/wget-show-external-deps.sh \
-		SPIDER=--spider source
+	@$(MAKE) -Bs DL_MODE=SHOW_EXTERNAL_DEPS $(EXTRAMAKEARGS) source | sort -u
 
-#############################################################
-#
-# Cleanup and misc junk
-#
-#############################################################
-clean: $(TARGETS_CLEAN)
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(PROJECT_BUILD_DIR)/.root $(PROJECT_BUILD_DIR)/autotools-stamps
+legal-info-clean:
+	@rm -fr $(LEGAL_INFO_DIR)
 
-dirclean: $(TARGETS_DIRCLEAN)
-	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(IMAGE) $(PROJECT_BUILD_DIR)/.root $(PROJECT_BUILD_DIR)/autotools-stamps
+legal-info-prepare: $(LEGAL_INFO_DIR)
+	@$(call MESSAGE,"Collecting legal info")
+	@$(call legal-license-file,buildroot,COPYING,COPYING)
+	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE)
+	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved)
+	@$(call legal-warning,the Buildroot source code has not been saved)
+	@$(call legal-warning,the toolchain has not been saved)
+	@cp $(CONFIG_DIR)/.config $(LEGAL_INFO_DIR)/buildroot.config
 
-distclean:
-ifeq ($(DL_DIR),$(BASE_DIR)/dl)
-	rm -rf $(DL_DIR)
-endif
-	rm -rf $(BUILD_DIR) $(PROJECT_BUILD_DIR) $(BINARIES_DIR) \
-	$(LINUX_KERNEL) $(BASE_DIR)/include \
-		.config.cmd
-	$(MAKE) -C $(CONFIG) clean
-
-sourceball:
-	rm -rf $(BUILD_DIR) $(PROJECT_BUILD_DIR) $(BINARIES_DIR)
-	set -e; \
-	cd ..; \
-	rm -f buildroot.tar.bz2; \
-	tar -cvf buildroot.tar buildroot; \
-	bzip2 -9 buildroot.tar; \
+legal-info: dirs legal-info-clean legal-info-prepare $(REDIST_SOURCES_DIR) \
+		$(TARGETS_LEGAL_INFO)
+	@cat support/legal-info/README.header >>$(LEGAL_REPORT)
+	@if [ -r $(LEGAL_WARNINGS) ]; then \
+		cat support/legal-info/README.warnings-header \
+			$(LEGAL_WARNINGS) >>$(LEGAL_REPORT); \
+		cat $(LEGAL_WARNINGS); fi
+	@echo "Legal info produced in $(LEGAL_INFO_DIR)"
+	@rm -f $(LEGAL_WARNINGS)
 
+show-targets:
+	@echo $(TARGETS)
 
 else # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
@@ -398,139 +570,209 @@ all: menuconfig
 HOSTCFLAGS=$(CFLAGS_FOR_BUILD)
 export HOSTCFLAGS
 
-$(CONFIG)/conf:
-	@mkdir -p $(CONFIG)/buildroot-config
-	$(MAKE) CC="$(HOSTCC)" -C $(CONFIG) conf
-	-@if [ ! -f .config ]; then \
-		cp $(CONFIG_DEFCONFIG) .config; \
-	fi
-$(CONFIG)/mconf:
-	@mkdir -p $(CONFIG)/buildroot-config
-	$(MAKE) CC="$(HOSTCC)" -C $(CONFIG) conf mconf
-	-@if [ ! -f .config ]; then \
-		cp $(CONFIG_DEFCONFIG) .config; \
-	fi
+$(BUILD_DIR)/buildroot-config/%onf:
+	mkdir -p $(@D)/lxdialog
+	$(MAKE) CC="$(HOSTCC_NOCCACHE)" HOSTCC="$(HOSTCC_NOCCACHE)" obj=$(@D) -C $(CONFIG) -f Makefile.br $(@F)
 
-menuconfig: $(CONFIG)/mconf
-	@mkdir -p $(CONFIG)/buildroot-config
-	@if ! KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/mconf $(CONFIG_CONFIG_IN); then \
-		test -f .config.cmd || rm -f .config; \
-	fi
+COMMON_CONFIG_ENV = \
+	KCONFIG_AUTOCONFIG=$(BUILD_DIR)/buildroot-config/auto.conf \
+	KCONFIG_AUTOHEADER=$(BUILD_DIR)/buildroot-config/autoconf.h \
+	KCONFIG_TRISTATE=$(BUILD_DIR)/buildroot-config/tristate.config \
+	BUILDROOT_CONFIG=$(CONFIG_DIR)/.config
 
-config: $(CONFIG)/conf
-	@mkdir -p $(CONFIG)/buildroot-config
-	@KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/conf $(CONFIG_CONFIG_IN)
+xconfig: $(BUILD_DIR)/buildroot-config/qconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-oldconfig: $(CONFIG)/conf
-	@mkdir -p $(CONFIG)/buildroot-config
-	@KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/conf -o $(CONFIG_CONFIG_IN)
+gconfig: $(BUILD_DIR)/buildroot-config/gconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) srctree=$(TOPDIR) $< $(CONFIG_CONFIG_IN)
 
-randconfig: $(CONFIG)/conf
-	@mkdir -p $(CONFIG)/buildroot-config
-	@KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/conf -r $(CONFIG_CONFIG_IN)
+menuconfig: $(BUILD_DIR)/buildroot-config/mconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-allyesconfig: $(CONFIG)/conf
-	cat $(CONFIG_DEFCONFIG) > .config
-	@mkdir -p $(CONFIG)/buildroot-config
-	@KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/conf -y $(CONFIG_CONFIG_IN)
-	#sed -i -e "s/^CONFIG_DEBUG.*/# CONFIG_DEBUG is not set/" .config
+nconfig: $(BUILD_DIR)/buildroot-config/nconf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-allnoconfig: $(CONFIG)/conf
-	@mkdir -p $(CONFIG)/buildroot-config
-	@KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/conf -n $(CONFIG_CONFIG_IN)
+config: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< $(CONFIG_CONFIG_IN)
 
-defconfig: $(CONFIG)/conf
-	@mkdir -p $(CONFIG)/buildroot-config
-	@KCONFIG_AUTOCONFIG=$(CONFIG)/buildroot-config/auto.conf \
-		KCONFIG_AUTOHEADER=$(CONFIG)/buildroot-config/autoconf.h \
-		$(CONFIG)/conf -d $(CONFIG_CONFIG_IN)
+oldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --oldconfig $(CONFIG_CONFIG_IN)
+
+randconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --randconfig $(CONFIG_CONFIG_IN)
+
+allyesconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --allyesconfig $(CONFIG_CONFIG_IN)
+
+allnoconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --allnoconfig $(CONFIG_CONFIG_IN)
+
+randpackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --randconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+
+allyespackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --allyesconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+
+allnopackageconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@grep -v BR2_PACKAGE_ $(CONFIG_DIR)/.config > $(CONFIG_DIR)/.config.nopkg
+	@$(COMMON_CONFIG_ENV) \
+		KCONFIG_ALLCONFIG=$(CONFIG_DIR)/.config.nopkg \
+		$< --allnoconfig $(CONFIG_CONFIG_IN)
+	@rm -f $(CONFIG_DIR)/.config.nopkg
+
+silentoldconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	$(COMMON_CONFIG_ENV) $< --silentoldconfig $(CONFIG_CONFIG_IN)
+
+defconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --defconfig$(if $(BR2_DEFCONFIG),=$(BR2_DEFCONFIG)) $(CONFIG_CONFIG_IN)
+
+%_defconfig: $(BUILD_DIR)/buildroot-config/conf $(TOPDIR)/configs/%_defconfig outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --defconfig=$(TOPDIR)/configs/$@ $(CONFIG_CONFIG_IN)
+
+savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile
+	@mkdir -p $(BUILD_DIR)/buildroot-config
+	@$(COMMON_CONFIG_ENV) $< --savedefconfig=$(CONFIG_DIR)/defconfig $(CONFIG_CONFIG_IN)
 
 # check if download URLs are outdated
-source-check: allyesconfig
-	$(MAKE) _source-check
+source-check:
+	$(MAKE) DL_MODE=SOURCE_CHECK $(EXTRAMAKEARGS) source
+
+endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
 
 #############################################################
 #
 # Cleanup and misc junk
 #
 #############################################################
+
+# outputmakefile generates a Makefile in the output directory, if using a
+# separate output directory. This allows convenient use of make in the
+# output directory.
+outputmakefile:
+ifeq ($(NEED_WRAPPER),y)
+	$(Q)$(TOPDIR)/support/scripts/mkmakefile $(TOPDIR) $(O)
+endif
+
 clean:
-	rm -f .config .config.old .config.cmd .tmpconfig.h .lognr.*
-	-$(MAKE) -C $(CONFIG) clean
+	rm -rf $(STAGING_DIR) $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
+		$(STAMP_DIR) $(BUILD_DIR) $(TOOLCHAIN_DIR) $(BASE_DIR)/staging \
+		$(LEGAL_INFO_DIR)
 
 distclean: clean
-	rm -rf sources/*
-
-
-endif # ifeq ($(BR2_HAVE_DOT_CONFIG),y)
-
-flush:
-	rm -f $(PROJECT_BUILD_DIR)/tgt-config.cache
-
-%_defconfig: $(CONFIG)/conf
-	cp $(shell find ./target/ -name $@) .config
-	-@$(MAKE) oldconfig
-
-update:
-	cp .config $(BOARD_PATH)/$(PROJECT)_defconfig
-
-configured: dirs host-sed kernel-headers uclibc-config busybox-config linux26-config
-
-prepatch:	gcc-patched binutils-patched gdb-patched uclibc-patched
-
-.lognr.$(PROJECT):
-	@echo "0" > .lognr.$(PROJECT)
-
-log:	.lognr.$(PROJECT)
-	@expr `cat .lognr.$(PROJECT)` + 1 > .lognr.$(PROJECT)	
-	@echo Creating $(PROJECT)-`cat .lognr.$(PROJECT)`.log
-	@$(MAKE) > $(PROJECT)-`cat .lognr.$(PROJECT)`.log 2>&1
-
+ifeq ($(DL_DIR),$(TOPDIR)/dl)
+	rm -rf $(DL_DIR)
+endif
+ifeq ($(O),output)
+	rm -rf $(O)
+endif
+	rm -rf $(CONFIG_DIR)/.config $(CONFIG_DIR)/.config.old $(CONFIG_DIR)/.auto.deps
 
 cross: $(BASE_TARGETS)
 
 help:
 	@echo 'Cleaning:'
-	@echo '  clean                  - delete temporary files created by build'
+	@echo '  clean                  - delete all files created by build'
 	@echo '  distclean              - delete all non-source files (including .config)'
 	@echo
 	@echo 'Build:'
 	@echo '  all                    - make world'
+	@echo '  <package>-rebuild      - force recompile <package>'
+	@echo '  <package>-reconfigure  - force reconfigure <package>'
 	@echo
 	@echo 'Configuration:'
 	@echo '  menuconfig             - interactive curses-based configurator'
+	@echo '  nconfig                - interactive ncurses-based configurator'
+	@echo '  xconfig                - interactive Qt-based configurator'
+	@echo '  gconfig                - interactive GTK-based configurator'
 	@echo '  oldconfig              - resolve any unresolved symbols in .config'
-	@echo '  configured             - make {uclibc/busybox/linux26}-config'
-	@echo '  saveconfig             - save current configuration under local/<project>'
-	@echo '  getconfig              - restore saved configuration from local/<project>'
+	@echo '  randconfig             - New config with random answer to all options'
+	@echo '  defconfig              - New config with default answer to all options'
+	@echo '                             BR2_DEFCONFIG, if set, is used as input'
+	@echo '  savedefconfig          - Save current config as ./defconfig (minimal config)'
+	@echo '  allyesconfig           - New config where all options are accepted with yes'
+	@echo '  allnoconfig            - New config where all options are answered with no'
+	@echo '  randpackageconfig      - New config with random answer to package options'
+	@echo '  allyespackageconfig    - New config where pkg options are accepted with yes'
+	@echo '  allnopackageconfig     - New config where package options are answered with no'
+ifeq ($(BR2_PACKAGE_BUSYBOX),y)
+	@echo '  busybox-menuconfig     - Run BusyBox menuconfig'
+endif
+ifeq ($(BR2_LINUX_KERNEL),y)
+	@echo '  linux-menuconfig       - Run Linux kernel menuconfig'
+	@echo '  linux-savedefconfig    - Run Linux kernel savedefconfig'
+endif
+ifeq ($(BR2_TOOLCHAIN_BUILDROOT),y)
+	@echo '  uclibc-menuconfig      - Run uClibc menuconfig'
+endif
+ifeq ($(BR2_TOOLCHAIN_CTNG),y)
+	@echo '  ctng-menuconfig        - Run crosstool-NG menuconfig'
+endif
+ifeq ($(BR2_TARGET_BAREBOX),y)
+	@echo '  barebox-menuconfig     - Run barebox menuconfig'
+	@echo '  barebox-savedefconfig  - Run barebox savedefconfig'
+endif
+	@echo
+	@echo 'Documentation:'
+	@echo '  manual                 - build manual in HTML, split HTML, PDF and txt'
+	@echo '  manual-html            - build manual in HTML'
+	@echo '  manual-split-html      - build manual in split HTML'
+	@echo '  manual-pdf             - build manual in PDF'
+	@echo '  manual-txt             - build manual in txt'
+	@echo '  manual-epub            - build manual in ePub'
 	@echo
 	@echo 'Miscellaneous:'
 	@echo '  source                 - download all sources needed for offline-build'
-	@echo '  source-check           - check all packages for valid download URLs'
+	@echo '  source-check           - check selected packages for valid download URLs'
 	@echo '  external-deps          - list external packages used'
-	@echo '  flush                  - flush configuration cache'
+	@echo '  legal-info             - generate info about license compliance'
 	@echo
-	@echo 'See docs/README and docs/buildroot.html for further details'
+	@echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
+	@echo '  make O=dir             - Locate all output files in "dir", including .config'
+	@echo
+	@$(foreach b, $(sort $(notdir $(wildcard $(TOPDIR)/configs/*_defconfig))), \
+	  printf "  %-35s - Build for %s\\n" $(b) $(b:_defconfig=);)
+	@echo
+	@echo 'See docs/README, or generate the Buildroot manual for further details'
 	@echo
 
-release: distclean
-	OUT=buildroot-$$(grep -A2 BR2_VERSION $(CONFIG_CONFIG_IN)|grep default|cut -f2 -d\"); \
-	rm -rf ../$$OUT*; cp -al . ../$$OUT; cd ..; \
-	tar cfz $$OUT.tar.gz --exclude .svn --exclude .git --exclude \*~ $$OUT; \
-	rm -rf $$OUT
+release: OUT=buildroot-$(BR2_VERSION)
 
-.PHONY: dummy subdirs release distclean clean config oldconfig \
-	menuconfig tags check test depend defconfig help
+# Create release tarballs. We need to fiddle a bit to add the generated
+# documentation to the git output
+release:
+	git archive --format=tar --prefix=$(OUT)/ master > $(OUT).tar
+	$(MAKE) O=$(OUT) manual-html manual-txt manual-pdf
+	tar rf $(OUT).tar $(OUT)
+	gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
+	bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
+	rm -rf $(OUT) $(OUT).tar
 
+print-version:
+	@echo $(BR2_VERSION_FULL)
+
+include docs/manual/manual.mk
+
+.PHONY: $(noconfig_targets)

Makefile.legacy

@@ -0,0 +1,30 @@
+#
+# Makefile.legacy - support for backward compatibility
+#
+# This file contains placeholders to detect backward-compatibility problems.
+# When a buildroot "API" feature is being deprecated, a rule should be added
+# here that issues an error when the old feature is used.
+#
+# This file is not included if BR2_DEPRECATED is selected, so it is possible
+# to bypass the errors (although that's usually a bad idea).
+
+ifeq ($(BR2_LEGACY),y)
+$(error "You have legacy configuration in your .config! Please check your configuration.")
+endif
+
+#
+# Legacy options from 2012.08
+#
+
+host-pkg-config:
+	@$(call MESSAGE,host-pkg-config is replaced by host-pkgconf)
+	@$(call MESSAGE,please update your .mk files)
+	@false
+.PHONY: host-pkg-config
+
+#
+# Legacy options from 2012.05
+#
+GENTARGETS = $$(error The GENTARGETS macro no longer exists; use $$$$(eval $$$$(generic-package)) or $$$$(eval $$$$(host-generic-package)))
+AUTOTARGETS = $$(error The AUTOTARGETS macro no longer exists; use $$$$(eval $$$$(autotools-package)) or $$$$(eval $$$$(host-autotools-package)))
+CMAKETARGETS = $$(error The CMAKETARGETS macro no longer exists; use $$$$(eval $$$$(cmake-package)) or $$$$(eval $$$$(host-cmake-package)))

TODO

@@ -1,14 +0,0 @@
-Buildroot2 TODOs
-
-- fix packages/Makefile.autotools.in to use a package-imposed patchdir
-  (Ivan Kuten)
-- convert all packages that use autoconf to use the infrastructure of
-  packages/Makefile.autotools.in
-- fix setting of flags for packages
-
-- stabilize for a 0.10.0 release
-
-- think about using a common --config-cache for configure
-  Should take care of expanding TARGET_CONFIGURE_ARGS for cross compiles
-  to working presets.
-

arch/Config.in

@@ -0,0 +1,223 @@
+config BR2_ARCH_IS_64
+       bool
+
+choice
+	prompt "Target Architecture"
+	default BR2_i386
+	help
+	  Select the target architecture family to build for.
+
+config BR2_arm
+	bool "ARM (little endian)"
+	help
+	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
+	  set architecture (ISA) developed by ARM Holdings. Little endian.
+	  http://www.arm.com/
+	  http://en.wikipedia.org/wiki/ARM
+
+config BR2_armeb
+	bool "ARM (big endian)"
+	help
+	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
+	  set architecture (ISA) developed by ARM Holdings. Big endian.
+	  http://www.arm.com/
+	  http://en.wikipedia.org/wiki/ARM
+
+config BR2_aarch64
+	bool "AArch64"
+	help
+	  Aarch64 is a 64-bit architecture developed by ARM Holdings.
+	  http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php
+	  http://en.wikipedia.org/wiki/ARM
+
+config BR2_avr32
+	bool "AVR32"
+	select BR2_SOFT_FLOAT
+	help
+	  The AVR32 is a 32-bit RISC microprocessor architecture designed by
+	  Atmel.
+	  http://www.atmel.com/
+	  http://en.wikipedia.org/wiki/Avr32
+
+config BR2_bfin
+	bool "Blackfin"
+	help
+	  The Blackfin is a family of 16 or 32-bit microprocessors developed,
+	  manufactured and marketed by Analog Devices.
+	  http://www.analog.com/
+	  http://en.wikipedia.org/wiki/Blackfin
+
+config BR2_i386
+	bool "i386"
+	help
+	  Intel i386 architecture compatible microprocessor
+	  http://en.wikipedia.org/wiki/I386
+
+config BR2_m68k
+	bool "m68k"
+	depends on BROKEN # ice in uclibc / inet_ntoa_r
+	help
+	  Motorola 68000 family microprocessor
+	  http://en.wikipedia.org/wiki/M68k
+
+config BR2_microblazeel
+	bool "Microblaze AXI (little endian)"
+	help
+	  Soft processor core designed for Xilinx FPGAs from Xilinx. AXI bus
+	  based architecture (little endian)
+	  http://www.xilinx.com
+	  http://en.wikipedia.org/wiki/Microblaze
+
+config BR2_microblazebe
+	bool "Microblaze non-AXI (big endian)"
+	help
+	  Soft processor core designed for Xilinx FPGAs from Xilinx. PLB bus
+	  based architecture (non-AXI, big endian)
+	  http://www.xilinx.com
+	  http://en.wikipedia.org/wiki/Microblaze
+
+config BR2_mips
+	bool "MIPS (big endian)"
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_mipsel
+	bool "MIPS (little endian)"
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_mips64
+	bool "MIPS64 (big endian)"
+	select BR2_ARCH_IS_64
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_mips64el
+	bool "MIPS64 (little endian)"
+	select BR2_ARCH_IS_64
+	help
+	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
+	  http://www.mips.com/
+	  http://en.wikipedia.org/wiki/MIPS_Technologies
+
+config BR2_powerpc
+	bool "PowerPC"
+	help
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  http://www.power.org/
+	  http://en.wikipedia.org/wiki/Powerpc
+
+config BR2_sh
+	bool "SuperH"
+	help
+	  SuperH (or SH) is a 32-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
+
+config BR2_sh64
+	bool "SuperH64"
+	help
+	  SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
+
+config BR2_sparc
+	bool "SPARC"
+	help
+	  SPARC (from Scalable Processor Architecture) is a RISC instruction
+	  set architecture (ISA) developed by Sun Microsystems.
+	  http://www.oracle.com/sun
+	  http://en.wikipedia.org/wiki/Sparc
+
+config BR2_x86_64
+	bool "x86_64"
+	select BR2_ARCH_IS_64
+	help
+	  x86-64 is an extension of the x86 instruction set (Intel i386
+	  architecture compatible microprocessor).
+	  http://en.wikipedia.org/wiki/X86_64
+
+config BR2_xtensa
+	bool "Xtensa"
+	help
+	  Xtensa is a Tensilica processor IP architecture.
+	  http://en.wikipedia.org/wiki/Xtensa
+	  http://www.tensilica.com/
+
+endchoice
+
+# The following string values are defined by the individual
+# Config.in.$ARCH files
+config BR2_ARCH
+	string
+
+config BR2_ENDIAN
+	string
+
+config BR2_GCC_TARGET_TUNE
+	string
+
+config BR2_GCC_TARGET_ARCH
+	string
+
+config BR2_GCC_TARGET_ABI
+	string
+
+config BR2_GCC_TARGET_CPU
+	string
+
+if BR2_arm || BR2_armeb
+source "arch/Config.in.arm"
+endif
+
+if BR2_aarch64
+source "arch/Config.in.aarch64"
+endif
+
+if BR2_avr32
+source "arch/Config.in.avr32"
+endif
+
+if BR2_bfin
+source "arch/Config.in.bfin"
+endif
+
+if BR2_m68k
+source "arch/Config.in.m68k"
+endif
+
+if BR2_microblazeel || BR2_microblazebe
+source "arch/Config.in.microblaze"
+endif
+
+if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
+source "arch/Config.in.mips"
+endif
+
+if BR2_powerpc
+source "arch/Config.in.powerpc"
+endif
+
+if BR2_sh || BR2_sh64
+source "arch/Config.in.sh"
+endif
+
+if BR2_sparc
+source "arch/Config.in.sparc"
+endif
+
+if BR2_i386 || BR2_x86_64
+source "arch/Config.in.x86"
+endif
+
+if BR2_xtensa
+source "arch/Config.in.xtensa"
+endif

arch/Config.in.aarch64

@@ -0,0 +1,5 @@
+config BR2_ARCH
+	default "aarch64"	if BR2_aarch64
+
+config BR2_ENDIAN
+	default "LITTLE"

arch/Config.in.arm

@@ -0,0 +1,114 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_arm || BR2_armeb
+	default BR2_generic_arm
+	help
+	  Specific CPU variant to use
+
+config BR2_generic_arm
+	bool "generic_arm"
+config BR2_arm7tdmi
+	bool "arm7tdmi"
+config BR2_arm610
+	bool "arm610"
+config BR2_arm710
+	bool "arm710"
+config BR2_arm720t
+	bool "arm720t"
+config BR2_arm920t
+	bool "arm920t"
+config BR2_arm922t
+	bool "arm922t"
+config BR2_arm926t
+	bool "arm926t"
+config BR2_arm10t
+	bool "arm10t"
+config BR2_arm1136jf_s
+	bool "arm1136jf_s"
+config BR2_arm1176jz_s
+	bool "arm1176jz-s"
+config BR2_arm1176jzf_s
+	bool "arm1176jzf-s"
+config BR2_cortex_a8
+	bool "cortex-A8"
+config BR2_cortex_a9
+	bool "cortex-A9"
+config BR2_sa110
+	bool "sa110"
+config BR2_sa1100
+	bool "sa1100"
+config BR2_xscale
+	bool "xscale"
+config BR2_iwmmxt
+	bool "iwmmxt"
+endchoice
+
+choice
+	prompt "Target ABI"
+	depends on BR2_arm || BR2_armeb
+	default BR2_ARM_EABI
+	help
+	  Application Binary Interface to use
+
+	  Note:
+	    Using OABI is discouraged.
+
+config BR2_ARM_EABI
+	bool "EABI"
+config BR2_ARM_OABI
+	bool "OABI"
+	depends on !BR2_GCC_VERSION_4_7_X
+endchoice
+
+config BR2_ARCH
+	default "arm"	if BR2_arm
+	default "armeb"	if BR2_armeb
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_arm
+	default "BIG"	 if BR2_armeb
+
+config BR2_GCC_TARGET_TUNE
+	default "arm600"	if BR2_arm600
+	default "arm610"	if BR2_arm610
+	default "arm620"	if BR2_arm620
+	default "arm7tdmi"	if BR2_arm7tdmi
+	default "arm7tdmi"	if BR2_arm720t
+	default "arm7tdmi"	if BR2_arm740t
+	default "arm920"	if BR2_arm920
+	default "arm920t"	if BR2_arm920t
+	default "arm922t"	if BR2_arm922t
+	default "arm926ej-s"	if BR2_arm926t
+	default "arm1136j-s"	if BR2_arm1136j_s
+	default "arm1136jf-s"	if BR2_arm1136jf_s
+	default "arm1176jz-s"	if BR2_arm1176jz_s
+	default "arm1176jzf-s"	if BR2_arm1176jzf_s
+	default "cortex-a8"	if BR2_cortex_a8
+	default "cortex-a9"	if BR2_cortex_a9
+	default "strongarm110"	if BR2_sa110
+	default "strongarm1100"	if BR2_sa1100
+	default "xscale"	if BR2_xscale
+	default "iwmmxt"	if BR2_iwmmxt
+
+config BR2_GCC_TARGET_ARCH
+	default "armv4t"	if BR2_arm7tdmi
+	default "armv3"		if BR2_arm610
+	default "armv3"		if BR2_arm710
+	default "armv4t"	if BR2_arm720t
+	default "armv4t"	if BR2_arm920t
+	default "armv4t"	if BR2_arm922t
+	default "armv5te"	if BR2_arm926t
+	default "armv5t"	if BR2_arm10t
+	default "armv6j"	if BR2_arm1136jf_s
+	default "armv6zk"	if BR2_arm1176jz_s
+	default "armv6zk"	if BR2_arm1176jzf_s
+	default "armv7-a"	if BR2_cortex_a8
+	default "armv7-a"	if BR2_cortex_a9
+	default "armv4"		if BR2_sa110
+	default "armv4"		if BR2_sa1100
+	default "armv5te"	if BR2_xscale
+	default "iwmmxt"	if BR2_iwmmxt
+
+config BR2_GCC_TARGET_ABI
+	default "apcs-gnu"	if BR2_ARM_OABI
+	default "aapcs-linux"	if BR2_ARM_EABI

arch/Config.in.avr32

@@ -0,0 +1,5 @@
+config BR2_ARCH
+       default "avr32"
+
+config BR2_ENDIAN
+       default "BIG"

arch/Config.in.bfin

@@ -0,0 +1,16 @@
+choice
+	prompt "Target ABI"
+	depends on BR2_bfin
+	default BR2_BFIN_FDPIC
+config BR2_BFIN_FDPIC
+	bool "FDPIC"
+config BR2_BFIN_FLAT
+	bool "FLAT"
+	select BR2_PREFER_STATIC_LIB
+endchoice
+
+config BR2_ARCH
+	default "bfin"
+
+config BR2_ENDIAN
+        default "LITTLE"

arch/Config.in.m68k

@@ -0,0 +1,21 @@
+config BR2_ARCH
+	default "m68k"		if BR2_m68k
+
+config BR2_ENDIAN
+	default "BIG"
+
+config BR2_GCC_TARGET_TUNE
+	default "68000"		if BR2_m68k_68000
+	default "68010"		if BR2_m68k_68010
+	default "68020"		if BR2_m68k_68020
+	default "68030"		if BR2_m68k_68030
+	default "68040"		if BR2_m68k_68040
+	default "68060"		if BR2_m68k_68060
+
+config BR2_GCC_TARGET_ARCH
+	default "68000"		if BR2_m68k_68000
+	default "68010"		if BR2_m68k_68010
+	default "68020"		if BR2_m68k_68020
+	default "68030"		if BR2_m68k_68030
+	default "68040"		if BR2_m68k_68040
+	default "68060"		if BR2_m68k_68060

arch/Config.in.microblaze

@@ -0,0 +1,10 @@
+config BR2_ARCH
+	default "microblaze"
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_microblazeel
+	default "BIG"	 if BR2_microblazebe
+
+config BR2_microblaze
+	bool
+	default y if BR2_microblazeel || BR2_microblazebe

arch/Config.in.mips

@@ -0,0 +1,78 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
+	default BR2_mips_3 if BR2_mips
+	default BR2_mips_1 if BR2_mipsel
+	default BR2_mips_64 if BR2_mips64 || BR2_mips64el
+	help
+	  Specific CPU variant to use
+
+	  64bit cabable: 3, 4, 64, 64r2
+	  non-64bit capable: 1, 2, 32, 32r2
+
+config BR2_mips_1
+	bool "mips I (generic)"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_2
+	bool "mips II"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_3
+	bool "mips III"
+config BR2_mips_4
+	bool "mips IV"
+config BR2_mips_32
+	bool "mips 32"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_32r2
+	bool "mips 32r2"
+	depends on !BR2_ARCH_IS_64
+config BR2_mips_64
+	bool "mips 64"
+config BR2_mips_64r2
+	bool "mips 64r2"
+endchoice
+
+
+choice
+	prompt "Target ABI"
+	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
+	default BR2_MIPS_OABI32 if !BR2_ARCH_IS_64
+	default BR2_MIPS_NABI32 if BR2_ARCH_IS_64
+
+	help
+	  Application Binary Interface to use
+
+config BR2_MIPS_OABI32
+	bool "o32"
+config BR2_MIPS_NABI32
+	bool "n32"
+	depends on BR2_ARCH_IS_64
+config BR2_MIPS_NABI64
+	bool "n64"
+	depends on BR2_ARCH_IS_64
+endchoice
+
+config BR2_ARCH
+	default "mips"		if BR2_mips
+	default "mipsel"	if BR2_mipsel
+	default "mips64"	if BR2_mips64
+	default "mips64el"	if BR2_mips64el
+
+config BR2_ENDIAN
+	default "LITTLE"	if BR2_mipsel || BR2_mips64el
+	default "BIG" 	    	if BR2_mips || BR2_mips64
+
+config BR2_GCC_TARGET_TUNE
+	default "mips1"		if BR2_mips_1
+	default "mips2"		if BR2_mips_2
+	default "mips3"		if BR2_mips_3
+	default "mips4"		if BR2_mips_4
+	default "mips32"	if BR2_mips_32
+	default "mips32r2"	if BR2_mips_32r2
+	default "mips64"	if BR2_mips_64
+	default "mips64r2"	if BR2_mips_64r2
+
+config BR2_GCC_TARGET_ABI
+	default "32"		if BR2_MIPS_OABI32
+	default "n32"		if BR2_MIPS_NABI32
+	default "64"		if BR2_MIPS_NABI64

arch/Config.in.powerpc

@@ -0,0 +1,128 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_powerpc
+	default BR2_generic_powerpc
+	help
+	  Specific CPU variant to use
+config BR2_generic_powerpc
+	bool "generic"
+config BR2_powerpc_401
+	bool "401"
+config BR2_powerpc_403
+	bool "403"
+config BR2_powerpc_405
+	bool "405"
+config BR2_powerpc_405fp
+	bool "405 with FPU"
+config BR2_powerpc_440
+	bool "440"
+config BR2_powerpc_440fp
+	bool "440 with FPU"
+config BR2_powerpc_505
+	bool "505"
+config BR2_powerpc_601
+	bool "601"
+config BR2_powerpc_602
+	bool "602"
+config BR2_powerpc_603
+	bool "603"
+config BR2_powerpc_603e
+	bool "603e"
+config BR2_powerpc_604
+	bool "604"
+config BR2_powerpc_604e
+	bool "604e"
+config BR2_powerpc_620
+	bool "620"
+config BR2_powerpc_630
+	bool "630"
+config BR2_powerpc_740
+	bool "740"
+config BR2_powerpc_7400
+	bool "7400"
+config BR2_powerpc_7450
+	bool "7450"
+config BR2_powerpc_750
+	bool "750"
+config BR2_powerpc_801
+	bool "801"
+config BR2_powerpc_821
+	bool "821"
+config BR2_powerpc_823
+	bool "823"
+config BR2_powerpc_860
+	bool "860"
+config BR2_powerpc_970
+	bool "970"
+config BR2_powerpc_8540
+	bool "8540 / e500v1"
+config BR2_powerpc_8548
+	bool "8548 / e500v2"
+config BR2_powerpc_e300c2
+	bool "e300c2"
+config BR2_powerpc_e300c3
+	bool "e300c3"
+config BR2_powerpc_e500mc
+	bool "e500mc"
+endchoice
+
+choice
+	prompt "Target ABI"
+	depends on BR2_powerpc
+	default BR2_powerpc_SPE if BR2_powerpc_8540 || BR2_powerpc_8548
+	default BR2_powerpc_CLASSIC
+	help
+	  Application Binary Interface to use
+
+config BR2_powerpc_CLASSIC
+	bool "Classic"
+	depends on !(BR2_powerpc_8540 || BR2_powerpc_8548)
+config BR2_powerpc_SPE
+	bool "SPE"
+	depends on BR2_powerpc_8540 || BR2_powerpc_8548
+endchoice
+
+config BR2_ARCH
+	default "powerpc"	if BR2_powerpc
+
+config BR2_ENDIAN
+	default "BIG"
+
+config BR2_GCC_TARGET_TUNE
+	default "401"		if BR2_powerpc_401
+	default "403"		if BR2_powerpc_403
+	default "405"		if BR2_powerpc_405
+	default "405fp"		if BR2_powerpc_405fp
+	default "440"		if BR2_powerpc_440
+	default "440fp"		if BR2_powerpc_440fp
+	default "505"		if BR2_powerpc_505
+	default "601"		if BR2_powerpc_601
+	default "602"		if BR2_powerpc_602
+	default "603"		if BR2_powerpc_603
+	default "603e"		if BR2_powerpc_603e
+	default "604"		if BR2_powerpc_604
+	default "604e"		if BR2_powerpc_604e
+	default "620"		if BR2_powerpc_620
+	default "630"		if BR2_powerpc_630
+	default "740"		if BR2_powerpc_740
+	default "7400"		if BR2_powerpc_7400
+	default "7450"		if BR2_powerpc_7450
+	default "750"		if BR2_powerpc_750
+	default "801"		if BR2_powerpc_801
+	default "821"		if BR2_powerpc_821
+	default "823"		if BR2_powerpc_823
+	default "860"		if BR2_powerpc_860
+	default "970"		if BR2_powerpc_970
+	default "8540"		if BR2_powerpc_8540
+	default	"8548"		if BR2_powerpc_8548
+	default "e300c2"	if BR2_powerpc_e300c2
+	default "e300c3"	if BR2_powerpc_e300c3
+	default "e500mc"	if BR2_powerpc_e500mc
+
+config BR2_GCC_TARGET_ABI
+	default "altivec"		if BR2_PPC_ABI_altivec
+	default "no-altivec"		if BR2_PPC_ABI_no-altivec
+	default "spe"			if BR2_PPC_ABI_spe
+	default "no-spe"		if BR2_PPC_ABI_no-spe
+	default "ibmlongdouble"		if BR2_PPC_ABI_ibmlongdouble
+	default "ieeelongdouble"	if BR2_PPC_ABI_ieeelongdouble

arch/Config.in.sh

@@ -0,0 +1,41 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_sh
+	default BR2_sh4
+	help
+	  Specific CPU variant to use
+
+config BR2_sh2
+	bool "sh2 (SH2 big endian)"
+config BR2_sh2a
+	bool "sh2a (SH2A big endian)"
+config BR2_sh3
+	bool "sh3 (SH3 little endian)"
+config BR2_sh3eb
+	bool "sh3eb (SH3 big endian)"
+config BR2_sh4
+	bool "sh4 (SH4 little endian)"
+config BR2_sh4eb
+	bool "sh4eb (SH4 big endian)"
+config BR2_sh4a
+	bool "sh4a (SH4A little endian)"
+config BR2_sh4aeb
+	bool "sh4aeb (SH4A big endian)"
+endchoice
+
+config BR2_ARCH
+	default "sh2"		if BR2_sh2
+	default "sh2a"		if BR2_sh2a
+	default "sh3"		if BR2_sh3
+	default "sh3eb"		if BR2_sh3eb
+	default "sh4"		if BR2_sh4
+	default "sh4eb"		if BR2_sh4eb
+	default "sh4a"		if BR2_sh4a
+	default "sh4aeb"	if BR2_sh4aeb
+	default "sh64"		if BR2_sh64
+
+config BR2_ENDIAN
+	default "LITTLE"	if BR2_sh3 || BR2_sh4 || BR2_sh4a || \
+				   BR2_x86_64 || BR2_sh64
+	default "BIG"		if BR2_sh2 || BR2_sh2a || BR2_sh3eb || \
+				   BR2_sh4eb || BR2_sh4aeb

arch/Config.in.sparc

@@ -0,0 +1,69 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_sparc
+	default BR2_sparc_v7
+	help
+	  Specific CPU variant to use
+
+config BR2_sparc_v7
+	bool "v7"
+config BR2_sparc_cypress
+	bool "cypress"
+config BR2_sparc_v8
+	bool "v8"
+config BR2_sparc_sparchfleon
+	bool "hfleon"
+config BR2_sparc_sparchfleonv8
+	bool "hfleonv8"
+config BR2_sparc_sparcsfleon
+	bool "sfleon"
+config BR2_sparc_sparcsfleonv8
+	bool "sfleonv8"
+config BR2_sparc_supersparc
+	bool "supersparc"
+config BR2_sparc_sparclite
+	bool "sparclite"
+config BR2_sparc_f930
+	bool "f930"
+config BR2_sparc_f934
+	bool "f934"
+config BR2_sparc_hypersparc
+	bool "hypersparc"
+config BR2_sparc_sparclite86x
+	bool "sparclite86x"
+config BR2_sparc_sparclet
+	bool "sparclet"
+config BR2_sparc_tsc701
+	bool "tsc701"
+endchoice
+
+config BR2_ARCH
+	default "sparc"	if BR2_sparc
+
+config BR2_ENDIAN
+	default "BIG"
+
+config BR2_GCC_TARGET_TUNE
+	default "v7"		if BR2_sparc_v7
+	default "cypress"	if BR2_sparc_cypress
+	default "v8"		if BR2_sparc_v8
+	default "supersparc"	if BR2_sparc_supersparc
+	default "hypersparc"	if BR2_sparc_hypersparc
+	default "sparclite"	if BR2_sparc_sparclite
+	default "f930"		if BR2_sparc_f930
+	default "f934"		if BR2_sparc_f934
+	default "sparclite86x"	if BR2_sparc_sparclite86x
+	default "sparclet"	if BR2_sparc_sparclet
+	default "tsc701"	if BR2_sparc_tsc701
+	default "v9"		if BR2_sparc_v9
+	default "v9"		if BR2_sparc_v9a
+	default "v9"		if BR2_sparc_v9b
+	default "ultrasparc"	if BR2_sparc_ultrasparc
+	default "ultrasparc3"	if BR2_sparc_ultrasparc3
+	default "niagara"	if BR2_sparc_niagara
+
+config BR2_GCC_TARGET_CPU
+	default "sparchfleon"	if BR2_sparc_sparchfleon
+	default "sparchfleonv8"	if BR2_sparc_sparchfleonv8
+	default "sparcsfleon"	if BR2_sparc_sparcsfleon
+	default "sparcsfleonv8"	if BR2_sparc_sparcsfleonv8

arch/Config.in.x86

@@ -0,0 +1,235 @@
+# i386/x86_64 cpu features
+config BR2_X86_CPU_HAS_MMX
+	bool
+config BR2_X86_CPU_HAS_SSE
+	bool
+config BR2_X86_CPU_HAS_SSE2
+	bool
+config BR2_X86_CPU_HAS_SSE3
+	bool
+config BR2_X86_CPU_HAS_SSSE3
+	bool
+
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_i386 || BR2_x86_64
+	default BR2_x86_i586 if BR2_i386
+	default BR2_x86_generic if BR2_x86_64
+	help
+	  Specific CPU variant to use
+
+config BR2_x86_generic
+	bool "generic"
+config BR2_x86_i386
+	bool "i386"
+	depends on !BR2_x86_64
+config BR2_x86_i486
+	bool "i486"
+	depends on !BR2_x86_64
+config BR2_x86_i586
+	bool "i586"
+	depends on !BR2_x86_64
+config BR2_x86_i686
+	bool "i686"
+	depends on !BR2_x86_64
+config BR2_x86_pentiumpro
+	bool "pentium pro"
+	depends on !BR2_x86_64
+config BR2_x86_pentium_mmx
+	bool "pentium MMX"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_pentium_m
+	bool "pentium mobile"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_pentium2
+	bool "pentium2"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_pentium3
+	bool "pentium3"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_pentium4
+	bool "pentium4"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	depends on !BR2_x86_64
+config BR2_x86_prescott
+	bool "prescott"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	depends on !BR2_x86_64
+config BR2_x86_nocona
+	bool "nocona"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+config BR2_x86_core2
+	bool "core2"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+config BR2_x86_atom
+	bool "atom"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+	select BR2_X86_CPU_HAS_SSSE3
+config BR2_x86_k6
+	bool "k6"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_k6_2
+	bool "k6-2"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_athlon
+	bool "athlon"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_athlon_4
+	bool "athlon-4"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_opteron
+	bool "opteron"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+config BR2_x86_opteron_sse3
+	bool "opteron w/ SSE3"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+config BR2_x86_barcelona
+	bool "barcelona"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	select BR2_X86_CPU_HAS_SSE2
+	select BR2_X86_CPU_HAS_SSE3
+config BR2_x86_geode
+	bool "geode"
+	# Don't include MMX support because there several variant of geode
+	# processor, some with MMX support, some without.
+	# See: http://en.wikipedia.org/wiki/Geode_%28processor%29
+	depends on !BR2_x86_64
+config BR2_x86_c3
+	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_c32
+	bool "Via C3-2 (Nehemiah cores)"
+	select BR2_X86_CPU_HAS_MMX
+	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
+config BR2_x86_winchip_c6
+	bool "IDT Winchip C6"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+config BR2_x86_winchip2
+	bool "IDT Winchip 2"
+	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
+endchoice
+
+config BR2_ARCH
+	default "i386"		if BR2_x86_i386
+	default "i486"		if BR2_x86_i486
+	default "i586"		if BR2_x86_i586
+	default "i586"		if BR2_x86_pentium_mmx
+	default "i586"		if BR2_x86_geode
+	default "i586"		if BR2_x86_c3
+	default "i686"		if BR2_x86_c32
+	default "i586"		if BR2_x86_winchip_c6
+	default "i586"		if BR2_x86_winchip2
+	default "i686"		if BR2_x86_i686
+	default "i686"		if BR2_x86_pentium2
+	default "i686"		if BR2_x86_pentium3
+	default "i686"		if BR2_x86_pentium4
+	default "i686"		if BR2_x86_pentium_m
+	default "i686"		if BR2_x86_pentiumpro
+	default "i686"		if BR2_x86_prescott
+	default "i686"		if BR2_x86_nocona && BR2_i386
+	default "i686"		if BR2_x86_core2 && BR2_i386
+	default "i686"		if BR2_x86_atom && BR2_i386
+	default "i686"		if BR2_x86_opteron && BR2_i386
+	default "i686"		if BR2_x86_opteron_sse3 && BR2_i386
+	default "i686"		if BR2_x86_barcelona && BR2_i386
+	default "i686"		if BR2_x86_k6
+	default "i686"		if BR2_x86_k6_2
+	default "i686"		if BR2_x86_athlon
+	default "i686"		if BR2_x86_athlon_4
+	default "x86_64"	if BR2_x86_64
+
+config BR2_ENDIAN
+	default "LITTLE"
+
+config BR2_GCC_TARGET_TUNE
+	default "i386"		if BR2_x86_i386
+	default "i486"		if BR2_x86_i486
+	default "i586"		if BR2_x86_i586
+	default "pentium-mmx"	if BR2_x86_pentium_mmx
+	default "i686"		if BR2_x86_i686
+	default "pentiumpro"	if BR2_x86_pentiumpro
+	default "pentium-m"	if BR2_x86_pentium_m
+	default "pentium2"	if BR2_x86_pentium2
+	default "pentium3"	if BR2_x86_pentium3
+	default "pentium4"	if BR2_x86_pentium4
+	default "prescott"	if BR2_x86_prescott
+	default "nocona"	if BR2_x86_nocona
+	default "core2"		if BR2_x86_core2
+	default "atom"		if BR2_x86_atom
+	default "k8"		if BR2_x86_opteron
+	default "k8-sse3"	if BR2_x86_opteron_sse3
+	default "barcelona"	if BR2_x86_barcelona
+	default "k6"		if BR2_x86_k6
+	default "k6-2"		if BR2_x86_k6_2
+	default "athlon"	if BR2_x86_athlon
+	default "athlon-4"	if BR2_x86_athlon_4
+	default "winchip-c6"	if BR2_x86_winchip_c6
+	default "winchip2"	if BR2_x86_winchip2
+	default "c3"		if BR2_x86_c3
+	default "c3-2"		if BR2_x86_c32
+	default "geode"		if BR2_x86_geode
+	default "generic"	if BR2_x86_generic
+
+config BR2_GCC_TARGET_ARCH
+	default "i386"		if BR2_x86_i386
+	default "i486"		if BR2_x86_i486
+	default "i586"		if BR2_x86_i586
+	default "pentium-mmx"	if BR2_x86_pentium_mmx
+	default "i686"		if BR2_x86_i686
+	default "pentiumpro"	if BR2_x86_pentiumpro
+	default "pentium-m"	if BR2_x86_pentium_m
+	default "pentium2"	if BR2_x86_pentium2
+	default "pentium3"	if BR2_x86_pentium3
+	default "pentium4"	if BR2_x86_pentium4
+	default "prescott"	if BR2_x86_prescott
+	default "nocona"	if BR2_x86_nocona
+	default "core2"		if BR2_x86_core2
+	default "atom"		if BR2_x86_atom
+	default "k8"		if BR2_x86_opteron
+	default "k8-sse3"	if BR2_x86_opteron_sse3
+	default "barcelona"	if BR2_x86_barcelona
+	default "k6"		if BR2_x86_k6
+	default "k6-2"		if BR2_x86_k6_2
+	default "athlon"	if BR2_x86_athlon
+	default "athlon-4"	if BR2_x86_athlon_4
+	default "winchip-c6"	if BR2_x86_winchip_c6
+	default "winchip2"	if BR2_x86_winchip2
+	default "c3"		if BR2_x86_c3
+	default "c3-2"		if BR2_x86_c32
+	default "geode"		if BR2_x86_geode

arch/Config.in.xtensa

@@ -0,0 +1,37 @@
+choice
+	prompt "Target Architecture Variant"
+	depends on BR2_xtensa
+	default BR2_xtensa_fsf
+config BR2_XTENSA_CUSTOM
+	bool "Custom Xtensa processor configuration"
+config BR2_xtensa_fsf
+	bool "fsf - Default configuration"
+endchoice
+
+config BR2_XTENSA_CUSTOM_NAME
+	string "Custom Xtensa processor configuration name"
+	depends on BR2_XTENSA_CUSTOM
+	default ""
+	help
+	  Name given to a custom Xtensa processor configuration.
+
+config BR2_XTENSA_CORE_NAME
+	string
+	default BR2_XTENSA_CUSTOM_NAME	if BR2_XTENSA_CUSTOM
+	default ""			if BR2_xtensa_fsf
+
+config BR2_XTENSA_OVERLAY_DIR
+	string "Overlay directory for custom configuration"
+	depends on BR2_XTENSA_CUSTOM
+	default ""
+	help
+	  Provide the directory path that contains the overlay file
+	  for a custom processor configuration. The path is relative
+	  to the top directory of buildroot.
+	  These overlay files are tar packages with updated configuration
+	  files for various toolchain packages and Xtensa processor
+	  configurations. They are provided by the processor vendor or
+	  directly from Tensilica.
+
+config BR2_ARCH
+	default "xtensa"	if BR2_xtensa

board/arm/foundation-v8/readme.txt

@@ -0,0 +1,19 @@
+This is the support for the ARM Foundation v8 machine emulated by the
+ARM software simulator of the AArch64 architecture.
+
+First, one has to download the AArch64 software simulator from:
+
+  https://silver.arm.com/download/download.tm?pv=1317469
+
+Then, use the arm_foundationv8_defconfig configuration to build your
+Buildroot system.
+
+Finally, boot your system with:
+
+ ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/Foundation_v8 \
+    --image output/images/linux-system.axf \
+    --block-device output/images/rootfs.ext2 \
+    --network=nat
+
+You can get network access from within the simulated environment
+by requesting an IP address using DHCP (run the command 'udhcpc').

board/armadeus/apf9328/linux-3.1.1-0001-fixes_arm_mach-types_for_apf9328.patch

@@ -0,0 +1,26 @@
+From 053ba505eb0d40287ac5750daf454af0aed2ce75 Mon Sep 17 00:00:00 2001
+From: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
+Date: Tue, 4 Oct 2011 14:19:58 +0200
+Subject: [PATCH 1/2] [ARM] mach-types: Re-add apf9328
+
+
+Signed-off-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@armadeus.com>
+---
+ arch/arm/tools/mach-types |    1 +
+ 1 files changed, 1 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types
+index fff68d0..07811a7 100644
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -188,6 +188,7 @@ omap_2430sdp		MACH_OMAP_2430SDP	OMAP_2430SDP		900
+ davinci_evm		MACH_DAVINCI_EVM	DAVINCI_EVM		901
+ palmz72			MACH_PALMZ72		PALMZ72			904
+ nxdb500			MACH_NXDB500		NXDB500			905
++apf9328			MACH_APF9328		APF9328			906
+ palmt5			MACH_PALMT5		PALMT5			917
+ palmtc			MACH_PALMTC		PALMTC			918
+ omap_apollon		MACH_OMAP_APOLLON	OMAP_APOLLON		919
+-- 
+1.7.3.4
+

board/armadeus/apf9328/linux-3.1.1-0002-add_missing_config_option_for_apf9328.patch

@@ -0,0 +1,16 @@
+APF9328 needs CONFIG_MTD_CFI_INTELEXT to boot on its NOR FLASH.
+
+Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
+
+Index: linux-3.1.1/arch/arm/mach-imx/Kconfig
+===================================================================
+--- linux-3.1.1.orig/arch/arm/mach-imx/Kconfig	2011-11-16 14:45:55.000000000 +0100
++++ linux-3.1.1/arch/arm/mach-imx/Kconfig	2011-11-16 14:47:20.000000000 +0100
+@@ -84,6 +84,7 @@
+ 	bool "APF9328"
+ 	select SOC_IMX1
+ 	select IMX_HAVE_PLATFORM_IMX_UART
++	select MTD_CFI_INTELEXT
+ 	help
+ 	  Say Yes here if you are using the Armadeus APF9328 development board
+ 

board/avnet/s6lx9_microboard/lx9_mmu.dts

@@ -0,0 +1,247 @@
+/*
+ * Device Tree Generator version: 1.3
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 13.2 EDK_O.61xd
+ *
+ * XPS project directory: device-tree_bsp_230-orig
+ */
+
+/dts-v1/;
+/ {
+    #address-cells = <1>;
+    #size-cells = <1>;
+    compatible = "xlnx,microblaze";
+    model = "testing";
+    MCB3_LPDDR: memory@80000000 {
+        device_type = "memory";
+        reg = < 0x80000000 0x4000000 >;
+    } ;
+    aliases {
+        ethernet0 = &Ethernet_MAC;
+        serial0 = &USB_Uart;
+    } ;
+    chosen {
+        bootargs = "console=ttyUL0";
+        linux,stdout-path = "/axi@0/serial@40600000";
+    } ;
+    cpus {
+        #address-cells = <1>;
+        #cpus = <0x1>;
+        #size-cells = <0>;
+        microblaze_0: cpu@0 {
+            clock-frequency = <66666667>;
+            compatible = "xlnx,microblaze-8.20.a";
+            d-cache-baseaddr = <0x80000000>;
+            d-cache-highaddr = <0x83ffffff>;
+            d-cache-line-size = <0x10>;
+            d-cache-size = <0x2000>;
+            device_type = "cpu";
+            i-cache-baseaddr = <0x80000000>;
+            i-cache-highaddr = <0x83ffffff>;
+            i-cache-line-size = <0x10>;
+            i-cache-size = <0x2000>;
+            model = "microblaze,8.20.a";
+            reg = <0>;
+            timebase-frequency = <66666667>;
+            xlnx,addr-tag-bits = <0xd>;
+            xlnx,allow-dcache-wr = <0x1>;
+            xlnx,allow-icache-wr = <0x1>;
+            xlnx,area-optimized = <0x0>;
+            xlnx,avoid-primitives = <0x0>;
+            xlnx,branch-target-cache-size = <0x0>;
+            xlnx,cache-byte-size = <0x2000>;
+            xlnx,d-axi = <0x1>;
+            xlnx,d-lmb = <0x1>;
+            xlnx,d-plb = <0x0>;
+            xlnx,data-size = <0x20>;
+            xlnx,dcache-addr-tag = <0xd>;
+            xlnx,dcache-always-used = <0x1>;
+            xlnx,dcache-byte-size = <0x2000>;
+            xlnx,dcache-data-width = <0x0>;
+            xlnx,dcache-force-tag-lutram = <0x0>;
+            xlnx,dcache-interface = <0x0>;
+            xlnx,dcache-line-len = <0x4>;
+            xlnx,dcache-use-fsl = <0x0>;
+            xlnx,dcache-use-writeback = <0x0>;
+            xlnx,dcache-victims = <0x0>;
+            xlnx,debug-enabled = <0x1>;
+            xlnx,div-zero-exception = <0x0>;
+            xlnx,dynamic-bus-sizing = <0x1>;
+            xlnx,ecc-use-ce-exception = <0x0>;
+            xlnx,edge-is-positive = <0x1>;
+            xlnx,endianness = <0x1>;
+            xlnx,family = "spartan6";
+            xlnx,fault-tolerant = <0x0>;
+            xlnx,fpu-exception = <0x0>;
+            xlnx,freq = <0x3f940ab>;
+            xlnx,fsl-data-size = <0x20>;
+            xlnx,fsl-exception = <0x0>;
+            xlnx,fsl-links = <0x0>;
+            xlnx,i-axi = <0x0>;
+            xlnx,i-lmb = <0x1>;
+            xlnx,i-plb = <0x0>;
+            xlnx,icache-always-used = <0x1>;
+            xlnx,icache-data-width = <0x0>;
+            xlnx,icache-force-tag-lutram = <0x0>;
+            xlnx,icache-interface = <0x0>;
+            xlnx,icache-line-len = <0x4>;
+            xlnx,icache-streams = <0x0>;
+            xlnx,icache-use-fsl = <0x0>;
+            xlnx,icache-victims = <0x0>;
+            xlnx,ill-opcode-exception = <0x0>;
+            xlnx,instance = "microblaze_0";
+            xlnx,interconnect = <0x2>;
+            xlnx,interconnect-m-axi-dc-aw-register = <0x0>;
+            xlnx,interconnect-m-axi-dc-read-issuing = <0x2>;
+            xlnx,interconnect-m-axi-dc-w-register = <0x0>;
+            xlnx,interconnect-m-axi-dc-write-issuing = <0x20>;
+            xlnx,interconnect-m-axi-dp-read-issuing = <0x1>;
+            xlnx,interconnect-m-axi-dp-write-issuing = <0x1>;
+            xlnx,interconnect-m-axi-ic-read-issuing = <0x2>;
+            xlnx,interconnect-m-axi-ip-read-issuing = <0x1>;
+            xlnx,interrupt-is-edge = <0x0>;
+            xlnx,lockstep-slave = <0x0>;
+            xlnx,mmu-dtlb-size = <0x1>;
+            xlnx,mmu-itlb-size = <0x1>;
+            xlnx,mmu-privileged-instr = <0x0>;
+            xlnx,mmu-tlb-access = <0x3>;
+            xlnx,mmu-zones = <0x2>;
+            xlnx,number-of-pc-brk = <0x1>;
+            xlnx,number-of-rd-addr-brk = <0x0>;
+            xlnx,number-of-wr-addr-brk = <0x0>;
+            xlnx,opcode-0x0-illegal = <0x0>;
+            xlnx,optimization = <0x0>;
+            xlnx,pvr = <0x0>;
+            xlnx,pvr-user1 = <0x0>;
+            xlnx,pvr-user2 = <0x0>;
+            xlnx,reset-msr = <0x0>;
+            xlnx,sco = <0x0>;
+            xlnx,stream-interconnect = <0x0>;
+            xlnx,unaligned-exceptions = <0x0>;
+            xlnx,use-barrel = <0x1>;
+            xlnx,use-branch-target-cache = <0x0>;
+            xlnx,use-dcache = <0x1>;
+            xlnx,use-div = <0x0>;
+            xlnx,use-ext-brk = <0x1>;
+            xlnx,use-ext-nm-brk = <0x1>;
+            xlnx,use-extended-fsl-instr = <0x0>;
+            xlnx,use-fpu = <0x0>;
+            xlnx,use-hw-mul = <0x1>;
+            xlnx,use-icache = <0x1>;
+            xlnx,use-interrupt = <0x1>;
+            xlnx,use-mmu = <0x3>;
+            xlnx,use-msr-instr = <0x1>;
+            xlnx,use-pcmp-instr = <0x0>;
+            xlnx,use-stack-protection = <0x0>;
+        } ;
+    } ;
+    axi4lite_0: axi@0 {
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "xlnx,axi-interconnect-1.03.a", "simple-bus";
+        ranges ;
+        Ethernet_MAC: ethernet@40e00000 {
+            compatible = "xlnx,axi-ethernetlite-1.00.a", "xlnx,xps-ethernetlite-1.00.a";
+            device_type = "network";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 2 0 >;
+            local-mac-address = [ 00 0a 35 aa de 00 ];
+//            phy-handle = <&phy0>;
+            reg = < 0x40e00000 0x10000 >;
+            xlnx,duplex = <0x1>;
+            xlnx,family = "spartan6";
+            xlnx,include-global-buffers = <0x0>;
+            xlnx,include-internal-loopback = <0x0>;
+            xlnx,include-mdio = <0x1>;
+            xlnx,include-phy-constraints = <0x1>;
+            xlnx,interconnect-s-axi-read-acceptance = <0x1>;
+            xlnx,interconnect-s-axi-write-acceptance = <0x1>;
+            xlnx,rx-ping-pong = <0x0>;
+            xlnx,s-axi-aclk-period-ps = <0x3a98>;
+            xlnx,s-axi-id-width = <0x1>;
+            xlnx,s-axi-supports-narrow-burst = <0x0>;
+            xlnx,tx-ping-pong = <0x0>;
+/*
+            mdio {
+                #address-cells = <1>;
+                #size-cells = <0>;
+                phy0: phy@7 {
+                    compatible = "marvell,88e1111";
+                    device_type = "ethernet-phy";
+                    reg = <7>;
+                } ;
+            } ;
+*/
+        } ;
+        SPI_FLASH: spi@40a00000 {
+            compatible = "xlnx,axi-spi-1.01.a", "xlnx,xps-spi-2.00.a";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 1 2 >;
+            reg = < 0x40a00000 0x10000 >;
+            xlnx,family = "spartan6";
+            xlnx,fifo-exist = <0x1>;
+            xlnx,num-ss-bits = <0x1>;
+            xlnx,num-transfer-bits = <0x8>;
+            xlnx,sck-ratio = <0x4>;
+        } ;
+        USB_Uart: serial@40600000 {
+            clock-frequency = <66666667>;
+            compatible = "xlnx,axi-uartlite-1.02.a", "xlnx,xps-uartlite-1.00.a";
+            current-speed = <115200>;
+            device_type = "serial";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 3 0 >;
+            port-number = <0>;
+            reg = < 0x40600000 0x10000 >;
+            xlnx,baudrate = <0x1c200>;
+            xlnx,data-bits = <0x8>;
+            xlnx,family = "spartan6";
+            xlnx,odd-parity = <0x1>;
+            xlnx,s-axi-aclk-freq-hz = <0x3f940ab>;
+            xlnx,use-parity = <0x0>;
+        } ;
+        microblaze_0_intc: interrupt-controller@41200000 {
+            #interrupt-cells = <0x2>;
+            compatible = "xlnx,axi-intc-1.01.a", "xlnx,xps-intc-1.00.a";
+            interrupt-controller ;
+            reg = < 0x41200000 0x10000 >;
+            xlnx,kind-of-intr = <0xc>;
+            xlnx,num-intr-inputs = <0x4>;
+        } ;
+        system_timer: timer@41c00000 {
+            clock-frequency = <66666667>;
+            compatible = "xlnx,axi-timer-1.02.a", "xlnx,xps-timer-1.00.a";
+            interrupt-parent = <&microblaze_0_intc>;
+            interrupts = < 0 2 >;
+            reg = < 0x41c00000 0x10000 >;
+            xlnx,count-width = <0x20>;
+            xlnx,family = "spartan6";
+            xlnx,gen0-assert = <0x1>;
+            xlnx,gen1-assert = <0x1>;
+            xlnx,one-timer-only = <0x0>;
+            xlnx,trig0-assert = <0x1>;
+            xlnx,trig1-assert = <0x1>;
+        } ;
+    } ;
+} ;

board/avnet/s6lx9_microboard/lx9_mmu_defconfig

@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_OPT_LIB_ASM is not set
+CONFIG_KERNEL_BASE_ADDR=0x80000000
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan6"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+# CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR is not set
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_XILINX_MICROBLAZE0_HW_VER="8.20.a"
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/avnet/s6lx9_microboard/readme.txt

@@ -0,0 +1,70 @@
+This is the buildroot board support for the Avnet Spartan6 LX9 MicroBoard.
+
+The Avnet S6LX9 Microboard is a small USB-Stick sized module containing
+a Spartan6 FPGA capable of running the Microblaze softcore processor
+together with RAM and FLASH memory.
+
+The board can be bought from Avnet (avnet.com) or from Trenz Electronic
+(www.trenz-electronic.de) for a low price.
+
+To run the Linux built with buildroot you have to install the FPGA bitfile
+and u-boot as described in the tutorial AvtS6LX9MicroBoard_SW302_PetaLinux
+available on http://www.em.avnet.com/s6microboard
+
+On this site also is a forum containing information on how to build your own
+Microblaze processor for the Microboard.
+
+The image file (default name is simpleImage.lx9_mmu.ub) has to be copied
+to your tftp folder (often /tftpboot/) or can be programmed into the
+board's SPI flash.
+
+Sample session:
+
+$ make s6lx9_microboard_defconfig
+$ make
+$ cp build/linux-<version>/arch/microblaze/boot/simpleImage.lx9_mmu.ub /tftpboot/br12.2a.ub
+$ minicom
+<hit the reset button on the S6LX9 Microboard>
+
+                Icache:ON
+                Dcache:ON
+        U-Boot Start:0x83f00000
+SF: Got idcode 20 ba 18 10 01
+*** Warning - bad CRC, using default environment
+
+Net:   Xilinx_Emaclite
+MAC:   00:0a:35:00:63:37
+U-BOOT for Avnet-LX9-Microboard-AXI-tiny-13.1
+
+BOOTP broadcast 1
+DHCP client bound to address 192.168.11.122
+Hit any key to stop autoboot:  0
+U-Boot-PetaLinux> tftp br12.2a.ub
+Using Xilinx_Emaclite device
+TFTP from server 192.168.11.10; our IP address is 192.168.11.122
+Filename 'br12.2a.ub'.
+Load address: 0x80002000
+Loading: #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         #################################################################
+         ##############################
+done
+Bytes transferred = 5207724 (4f76ac hex)
+U-Boot-PetaLinux> bootm
+## Booting kernel from Legacy Image at 80002000 ...
+   Image Name:   Linux-3.1.0
+   Image Type:   MicroBlaze Linux Kernel Image (uncompressed)
+   Data Size:    5207660 Bytes =  5 MB
+   Load Address: 80000000
+   Entry Point:  80000000
+   Verifying Checksum ... OK
+   Loading Kernel Image ... OK
+OK
+## Transferring control to Linux (at address 80000000), 0x80000000 ramdisk 0x00000000, FDT 0x00000000...
+Early console on uartlite at 0x40600000
+..... boot log skipped
+
+Welcome to Microblaze Buildroot
+Microblaze login:

board/beaglebone/linux-3.2.9.config

@@ -0,0 +1,252 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_DEFAULT_HOSTNAME="beaglebone"
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_FHANDLE=y
+CONFIG_SPARSE_IRQ=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_FORCE_LOAD=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_BLK_DEV_INTEGRITY=y
+CONFIG_ARCH_OMAP=y
+CONFIG_OMAP_MUX_DEBUG=y
+CONFIG_OMAP_MBOX_FWK=y
+# CONFIG_OMAP_32K_TIMER is not set
+# CONFIG_MACH_OMAP_GENERIC is not set
+# CONFIG_ARCH_OMAP2 is not set
+# CONFIG_ARCH_OMAP4 is not set
+# CONFIG_SOC_OMAP3430 is not set
+# CONFIG_MACH_OMAP3_BEAGLE is not set
+# CONFIG_MACH_DEVKIT8000 is not set
+# CONFIG_MACH_OMAP_LDP is not set
+# CONFIG_MACH_OMAP3530_LV_SOM is not set
+# CONFIG_MACH_OMAP3_TORPEDO is not set
+# CONFIG_MACH_ENCORE is not set
+# CONFIG_MACH_OVERO is not set
+# CONFIG_MACH_OMAP3EVM is not set
+# CONFIG_MACH_OMAP3517EVM is not set
+# CONFIG_MACH_OMAP3_PANDORA is not set
+# CONFIG_MACH_OMAP3_TOUCHBOOK is not set
+# CONFIG_MACH_OMAP_3430SDP is not set
+# CONFIG_MACH_NOKIA_RM680 is not set
+# CONFIG_MACH_NOKIA_RX51 is not set
+# CONFIG_MACH_OMAP_ZOOM2 is not set
+# CONFIG_MACH_OMAP_ZOOM3 is not set
+# CONFIG_MACH_CM_T35 is not set
+# CONFIG_MACH_CM_T3517 is not set
+# CONFIG_MACH_IGEP0020 is not set
+# CONFIG_MACH_IGEP0030 is not set
+# CONFIG_MACH_SBC3530 is not set
+# CONFIG_MACH_OMAP_3630SDP is not set
+# CONFIG_MACH_TI8168EVM is not set
+# CONFIG_MACH_TI8148EVM is not set
+# CONFIG_MACH_AM335XIAEVM is not set
+CONFIG_OMAP3_EDMA=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_ARM_ERRATA_430973=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_THUMB2_KERNEL=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=" debug "
+CONFIG_AUTO_ZRELADDR=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_BINFMT_MISC=y
+# CONFIG_SUSPEND is not set
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_USER=y
+CONFIG_NET_KEY=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_RFKILL_REGULATOR=m
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_CONNECTOR=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=2
+CONFIG_BLK_DEV_RAM_SIZE=65536
+CONFIG_MISC_DEVICES=y
+CONFIG_BMP085=m
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SENSORS_LIS3_I2C=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_TI_CPSW=y
+CONFIG_SMSC_PHY=y
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV is not set
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_MOUSE_PS2 is not set
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_AD714X=m
+CONFIG_INPUT_BMA150=m
+CONFIG_INPUT_MMA8450=m
+CONFIG_INPUT_MPU3050=m
+CONFIG_INPUT_ATI_REMOTE2=m
+CONFIG_INPUT_KEYSPAN_REMOTE=m
+CONFIG_INPUT_KXTJ9=m
+CONFIG_INPUT_POWERMATE=m
+CONFIG_INPUT_YEALINK=m
+CONFIG_INPUT_CM109=m
+CONFIG_INPUT_TWL4030_PWRBUTTON=y
+CONFIG_INPUT_TWL4030_VIBRA=m
+CONFIG_INPUT_TWL6040_VIBRA=m
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_PCF8574=m
+CONFIG_INPUT_GPIO_ROTARY_ENCODER=m
+CONFIG_INPUT_ADXL34X=m
+CONFIG_INPUT_CMA3000=m
+CONFIG_INPUT_CMA3000_I2C=m
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=32
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_DETECT_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_HW_RANDOM=y
+CONFIG_RAW_DRIVER=m
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_OMAP24XX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_TWL4030=y
+CONFIG_GENERIC_PWM=y
+CONFIG_DAVINCI_EHRPWM=y
+CONFIG_ECAP_PWM=y
+CONFIG_POWER_SUPPLY=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_OMAP_WATCHDOG=y
+CONFIG_TWL4030_WATCHDOG=y
+CONFIG_MFD_TPS65217=y
+CONFIG_REGULATOR_DUMMY=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_REGULATOR_VIRTUAL_CONSUMER=y
+CONFIG_REGULATOR_USERSPACE_CONSUMER=y
+CONFIG_REGULATOR_GPIO=y
+CONFIG_REGULATOR_TWL4030=y
+CONFIG_REGULATOR_TPS65023=y
+CONFIG_REGULATOR_TPS6507X=y
+CONFIG_REGULATOR_TPS65217=y
+CONFIG_DISPLAY_SUPPORT=y
+CONFIG_HIDRAW=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MUSB_HDRC=y
+CONFIG_USB_MUSB_TI81XX_GLUE=y
+CONFIG_USB_TI_CPPI41_DMA_HW=y
+CONFIG_USB_ACM=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_UNSAFE_RESUME=y
+CONFIG_MMC_OMAP_HS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_UIO=m
+CONFIG_UIO_PDRV=m
+CONFIG_UIO_PDRV_GENIRQ=m
+CONFIG_UIO_PRUSS=m
+CONFIG_STAGING=y
+CONFIG_IIO=y
+CONFIG_IIO_BUFFER=y
+CONFIG_IIO_SW_RING=y
+CONFIG_IIO_KFIFO_BUF=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_PM_DEVFREQ=y
+CONFIG_DEVFREQ_GOV_USERSPACE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_FANOTIFY=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+# CONFIG_NETWORK_FILESYSTEMS is not set
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_UTF8=y
+CONFIG_PRINTK_TIME=y
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_FS=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_SCHEDSTATS=y
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+CONFIG_DEBUG_JTAG_ENABLE=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/boundarydevices/nitrogen6x/post-build.sh

@@ -0,0 +1,18 @@
+#!/bin/sh
+# post-build fixups
+# for furthe details, see
+# http://boundarydevices.com/u-boot-conventions-for-i-mx6-nitrogen6x-and-sabrelite/
+
+TARGET_DIR=$1
+IMAGES_DIR=$1/../images
+BOARD_DIR="$(dirname $0)"
+
+# bd u-boot looks for bootscript here
+cp $BOARD_DIR/6q_bootscript $TARGET_DIR
+
+# u-boot / update script for bd upgradeu command
+if [ -e $IMAGES_DIR/u-boot.bin ];
+then
+    cp $IMAGES_DIR/u-boot.bin $TARGET_DIR
+    cp $BOARD_DIR/6q_upgrade $TARGET_DIR
+fi

board/boundarydevices/nitrogen6x/readme.txt

@@ -0,0 +1,16 @@
+Buildroot for Boundary Devices Nitrogen6X:
+
+http://boundarydevices.com/products/nitrogen6x-board-imx6-arm-cortex-a9-sbc/
+
+Notice: U-Boot as shipped on the board has a bug reading rev 0 ext2
+file systems (which is what genext2fs generates). To convert it to rev
+1, do:
+
+tune2fs -O filetype output/images/rootfs.ext2
+e2fsck -a output/images/rootfs.ext2
+
+To install, simply extract rootfs.ext2 to first partition of a uSD card:
+
+sudo dd if=output/images/rootfs.ext2 of=/dev/sdX1
+
+Where 'sdX1' is the device node of the uSD partition.

board/calao/qil-a9260/at91bootstrap-1.16-qil-a9260.patch

@@ -0,0 +1,603 @@
+From a3e08beea8bf5e96e1237eef4a82f4a2fdd5286b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 19 Jul 2012 14:19:59 +0200
+Subject: [PATCH] Add support for the Calao-systems QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/qil_a9260/nandflash/Makefile    |  122 ++++++++++++++
+ board/qil_a9260/nandflash/qil-a9260.h |  109 ++++++++++++
+ board/qil_a9260/qil_a9260.c           |  298 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ include/part.h                        |    6 +-
+ 5 files changed, 541 insertions(+), 1 deletions(-)
+ create mode 100644 board/qil_a9260/nandflash/Makefile
+ create mode 100644 board/qil_a9260/nandflash/qil-a9260.h
+ create mode 100644 board/qil_a9260/qil_a9260.c
+
+diff --git a/board/qil_a9260/nandflash/Makefile b/board/qil_a9260/nandflash/Makefile
+new file mode 100644
+index 0000000..209a25f
+--- /dev/null
++++ b/board/qil_a9260/nandflash/Makefile
+@@ -0,0 +1,122 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for QIL-A9260
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9260
++# Board name (case sensitive!!!)
++BOARD=qil_a9260
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/qil_a9260/nandflash/qil-a9260.h b/board/qil_a9260/nandflash/qil-a9260.h
+new file mode 100644
+index 0000000..c87002e
+--- /dev/null
++++ b/board/qil_a9260/nandflash/qil-a9260.h
+@@ -0,0 +1,109 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil-a9260.h
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _QIL_A9260_H
++#define _QIL_A9260_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000.*/
++/* Please refer to SMC section in AT91SAM datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       	0x6AF		/* QIL-A9260 */
++#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++#endif	/* _QIL_A9260_H */
+diff --git a/board/qil_a9260/qil_a9260.c b/board/qil_a9260/qil_a9260.c
+new file mode 100644
+index 0000000..ae122e7
+--- /dev/null
++++ b/board/qil_a9260/qil_a9260.c
+@@ -0,0 +1,298 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : qil_a9260.c
++ * Object              :
++ * Creation            : GH July 19th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase DataFlash Page 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..bbd33fe 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -35,7 +35,11 @@
+ 
+ #ifdef AT91SAM9260
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9260ek.h"
++	#ifdef at91sam9260ek
++	#include "at91sam9260ek.h"
++	#elif qil_a9260
++	#include "qil-a9260.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9XE
+-- 
+1.5.6.3
+

board/calao/qil-a9260/barebox-2012.07.0-qil-a9260.patch

@@ -0,0 +1,36 @@
+From d076aa6182dc6df6bb311e60bbddb03573b9483b Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 11:25:49 +0200
+Subject: [PATCH] Enable pull-up on Rx serial ports for the CALAO MB-QIL-A9260
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/boards/qil-a9260/init.c |    6 ++++++
+ 1 files changed, 6 insertions(+), 0 deletions(-)
+
+diff --git a/arch/arm/boards/qil-a9260/init.c b/arch/arm/boards/qil-a9260/init.c
+index 305d733..b43cace 100644
+--- a/arch/arm/boards/qil-a9260/init.c
++++ b/arch/arm/boards/qil-a9260/init.c
+@@ -196,11 +196,17 @@ device_initcall(qil_a9260_devices_init);
+ static int qil_a9260_console_init(void)
+ {
+ 	at91_register_uart(0, 0);
++	at91_set_A_periph(AT91_PIN_PB14, 1);    /* Enable pull-up on DRXD */
++
+ 	at91_register_uart(1, ATMEL_UART_CTS | ATMEL_UART_RTS
+ 			   | ATMEL_UART_DTR | ATMEL_UART_DSR | ATMEL_UART_DCD
+ 			   | ATMEL_UART_RI);
++
+ 	at91_register_uart(2, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB7, 1);	/* Enable pull-up on RXD1 */
++
+ 	at91_register_uart(3, ATMEL_UART_CTS | ATMEL_UART_RTS);
++	at91_set_A_periph(AT91_PIN_PB9, 1);	/* Enable pull-up on RXD2 */
+ 
+ 	return 0;
+ }
+-- 
+1.5.6.3
+

board/calao/qil-a9260/linux-3.4.7.config

@@ -0,0 +1,111 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_AT91_SLOW_CLOCK=y
+CONFIG_AT91_EARLY_USART0=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS1,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_AT91=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_M41T94=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/qil-a9260/linux-3.4.7.patch

@@ -0,0 +1,27 @@
+From fe6432a9728b62bce3db73c5a4efe026018fd495 Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 3 Aug 2012 16:45:37 +0200
+Subject: [PATCH] QIL-A9260: rtc modalias m41t48 renamed to rtc-m41t48
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ arch/arm/mach-at91/board-qil-a9260.c |    2 +-
+ 1 files changed, 1 insertions(+), 1 deletions(-)
+
+diff --git a/arch/arm/mach-at91/board-qil-a9260.c b/arch/arm/mach-at91/board-qil-a9260.c
+index bf351e2..c0df05c 100644
+--- a/arch/arm/mach-at91/board-qil-a9260.c
++++ b/arch/arm/mach-at91/board-qil-a9260.c
+@@ -78,7 +78,7 @@ static struct at91_udc_data __initdata ek_udc_data = {
+ static struct spi_board_info ek_spi_devices[] = {
+ #if defined(CONFIG_RTC_DRV_M41T94)
+ 	{	/* M41T94 RTC */
+-		.modalias	= "m41t94",
++		.modalias	= "rtc-m41t94",
+ 		.chip_select	= 0,
+ 		.max_speed_hz	= 1 * 1000 * 1000,
+ 		.bus_num	= 0,
+-- 
+1.5.6.3
+

board/calao/usb-a9263/at91bootstrap-1.16-usb-a9263.patch

@@ -0,0 +1,851 @@
+From 74796655212d321f50ab89e8c5570245901f4cba Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Thu, 5 Jul 2012 18:44:07 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9263
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9263/dataflash/Makefile    |  115 +++++++++++++
+ board/usb_a9263/dataflash/usb-a9263.h |   97 +++++++++++
+ board/usb_a9263/nandflash/Makefile    |  117 ++++++++++++++
+ board/usb_a9263/nandflash/usb-a9263.h |  116 +++++++++++++
+ board/usb_a9263/usb_a9263.c           |  285 +++++++++++++++++++++++++++++++++
+ crt0_gnu.S                            |    7 +
+ driver/dataflash.c                    |    6 +-
+ include/part.h                        |    6 +-
+ 8 files changed, 745 insertions(+), 4 deletions(-)
+ create mode 100644 board/usb_a9263/dataflash/Makefile
+ create mode 100644 board/usb_a9263/dataflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/nandflash/Makefile
+ create mode 100644 board/usb_a9263/nandflash/usb-a9263.h
+ create mode 100644 board/usb_a9263/usb_a9263.c
+
+diff --git a/board/usb_a9263/dataflash/Makefile b/board/usb_a9263/dataflash/Makefile
+new file mode 100644
+index 0000000..332685e
+--- /dev/null
++++ b/board/usb_a9263/dataflash/Makefile
+@@ -0,0 +1,115 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++#CROSS_COMPILE = arm-softfloat-linux-gnu-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# DataFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=dataflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	dataflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/dataflash/usb-a9263.h b/board/usb_a9263/dataflash/usb-a9263.h
+new file mode 100644
+index 0000000..40a3af8
+--- /dev/null
++++ b/board/usb_a9263/dataflash/usb-a9263.h
+@@ -0,0 +1,97 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* DataFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SPI	AT91C_BASE_SPI0
++#define AT91C_ID_SPI	AT91C_ID_SPI0
++
++/* SPI CLOCK */
++#define AT91C_SPI_CLK 		 8000000
++/* AC characteristics */
++/* DLYBS = tCSS= 250ns min and DLYBCT = tCSH = 250ns */
++#define DATAFLASH_TCSS		(0x1a << 16)	/* 250ns min (tCSS) <=> 12/48000000 = 250ns */
++#define DATAFLASH_TCHS		(0x1 << 24)	/* 250ns min (tCSH) <=> (64*1+SCBR)/(2*48000000) */
++
++#define DF_CS_SETTINGS 		(AT91C_SPI_NCPHA | (AT91C_SPI_DLYBS & DATAFLASH_TCSS) | (AT91C_SPI_DLYBCT & DATAFLASH_TCHS) | ((MASTER_CLOCK / AT91C_SPI_CLK) << 8))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
++
++#define IMG_ADDRESS 			0x4000			/* Image Address in DataFlash */
++#define	IMG_SIZE			0x40000			/* Image Size in DataFlash    */
++
++#define MACH_TYPE       		0x6AE       		/* USB-A9263 */
++#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#define CFG_HW_INIT
++#define CFG_SDRAM
++#undef	CFG_DEBUG
++
++#define CFG_DATAFLASH
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/nandflash/Makefile b/board/usb_a9263/nandflash/Makefile
+new file mode 100644
+index 0000000..c453098
+--- /dev/null
++++ b/board/usb_a9263/nandflash/Makefile
+@@ -0,0 +1,117 @@
++# TODO: set this appropriately for your local toolchain
++#SHELL=C:\CYGWIN_REP\dwn_071004\bin\BASH.exe
++CROSS_COMPILE=arm-elf-
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9263
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9263
++# Board name (case sensitive!!!)
++BOARD=usb_a9263
++# Link Address and Top_of_Memory
++LINK_ADDR=0x300000
++TOP_OF_MEMORY=0x314000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib  -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++	
++	
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	rm -f *.o *.bin *.elf *.map
+diff --git a/board/usb_a9263/nandflash/usb-a9263.h b/board/usb_a9263/nandflash/usb-a9263.h
+new file mode 100644
+index 0000000..24e2cf1
+--- /dev/null
++++ b/board/usb_a9263/nandflash/usb-a9263.h
+@@ -0,0 +1,116 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9263.h
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9263_H
++#define _USB_A9263_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(180000000/2)
++#define PLL_LOCK_TIMEOUT	1000000
++
++#define PLLA_SETTINGS	0x20593F06
++#define PLLB_SETTINGS	0x10483F0E
++
++/* Switch MCK on PLLA output PCK = PLLA = 2 * MCK */
++#define MCKR_SETTINGS		(AT91C_PMC_PRES_CLK | AT91C_PMC_MDIV_2)
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOD_SODR = AT91C_PIO_PD15;} while(0)
++#define NAND_ENABLE_CE()  do { *(volatile unsigned int *)AT91C_PIOD_CODR = AT91C_PIO_PD15;} while(0)
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOA_PDSR & AT91C_PIO_PA22))
++
++/* ******************************************************************* */
++/* SDRAMC Settings                                                     */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_BASE_SDRAMC 	AT91C_BASE_SDRAMC0
++#define AT91C_EBI_SDRAM		AT91C_EBI0_SDRAM
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 90000000. */
++/* Please refer to SMC section in AT91SAM9x datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(1 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(1 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(3 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(3 << 8)
++#define AT91C_SM_NRD_PULSE	(3 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(3 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(5 << 0)
++#define AT91C_SM_NRD_CYCLE	(5 << 16)
++
++#define AT91C_SM_TDF	        (2 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 	0x20000		/* Image Address in NandFlash */
++#define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
++
++#define MACH_TYPE       0x6AE  		/* USB-A9263 */
++#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++
++#define CFG_HW_INIT
++#define CFG_SDRAM
++
++
++#endif	/* _USB_A9263_H */
+diff --git a/board/usb_a9263/usb_a9263.c b/board/usb_a9263/usb_a9263.c
+new file mode 100644
+index 0000000..5630f99
+--- /dev/null
++++ b/board/usb_a9263/usb_a9263.c
+@@ -0,0 +1,285 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2006, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaiimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9263.c
++ * Object              :
++ * Creation            : GH Jun 28th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++
++#ifdef CFG_HW_INIT
++/*---------------------------------------------------------------------------- */
++/* \fn    hw_init							       */
++/* \brief This function performs very low level HW initialization	       */
++/* This function is invoked as soon as possible during the c_startup	       */
++/* The bss segment must be initialized					       */
++/*---------------------------------------------------------------------------- */
++void hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA = 2 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure the PIO controller to output PCK0 */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI0 Slave Slot Cycle to 64 */
++	writel( (readl((AT91C_BASE_MATRIX + MATRIX_SCFG4)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG4));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix */
++	/* VDDIOMSEL = 1 -> Memories are 3.3V powered */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | (1 << 16) | AT91C_EBI_CS1A_SDRAMC, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_2 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_2 |
++				AT91C_SDRAMC_TRC_7 |
++				AT91C_SDRAMC_TRP_2 |
++				AT91C_SDRAMC_TRCD_2 |
++				AT91C_SDRAMC_TRAS_5 |
++				AT91C_SDRAMC_TXSR_8,		/* Control Register       */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++				AT91C_SDRAMC_MD_SDRAM);		/* SDRAM (no low power)   */ 
++#endif	/* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++
++#ifdef CFG_SDRAM
++//*----------------------------------------------------------------------------
++//* \fn    sdramc_hw_init
++//* \brief This function performs SDRAMC HW initialization
++//*----------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PD(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PD(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PD(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PD(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PD(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PD(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PD(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PD(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PD(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PD(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PD(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PD(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PD(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PD(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PD(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PD(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the SDRAMC PIO controller */
++	pio_setup(sdramc_pio);
++}
++#endif
++
++#ifdef CFG_DATAFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{"NPCS0", AT91C_PIN_PA(5), 0, PIO_DEFAULT, PIO_PERIPH_B},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery								*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb_pio[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb_pio);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PA(22), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PD(15), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBI0CSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBI0CSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC0 + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC0 + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC0 + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC0 + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOA), PMC_PCER + AT91C_BASE_PMC);
++	writel((1 << AT91C_ID_PIOCDE), PMC_PCER + AT91C_BASE_PMC);
++
++	pio_setup(nand_pio);
++
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC0 + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC0 + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC0 + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
++
++
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/driver/dataflash.c b/driver/dataflash.c
+index e28e49e..4de295a 100644
+--- a/driver/dataflash.c
++++ b/driver/dataflash.c
+@@ -293,14 +293,14 @@ static int df_init (AT91PS_DF pDf)
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+-
++*/
+ 		case AT45DB021B:
+ 			pDf->dfDescription.pages_number = 1024;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+ 			break;
+ 
+-		case AT45DB041B:
++/*		case AT45DB041B:
+ 			pDf->dfDescription.pages_number = 2048;
+ 			pDf->dfDescription.pages_size = 264;
+ 			pDf->dfDescription.page_offset = 9;
+@@ -373,7 +373,7 @@ int load_df(unsigned int pcs, unsigned int img_addr, unsigned int img_size, unsi
+     if (!df_init(pDf))
+         return -1;
+ 
+-#if defined(AT91SAM9260) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
++#if defined(AT91SAM9260) || defined(AT91SAM9263) || defined(AT91SAM9XE) || defined(AT91SAM9G20)
+     /* Test if a button has been pressed or not */
+     /* Erase Page 0 to avoid infinite loop */
+     df_recovery(pDf);
+diff --git a/include/part.h b/include/part.h
+index ba5985a..a1863d0 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -61,7 +61,11 @@
+ 
+ #ifdef AT91SAM9263
+ #include "AT91SAM9263_inc.h"
+-#include "at91sam9263ek.h"
++	#ifdef at91sam9263ek
++	#include "at91sam9263ek.h"
++	#elif usb_a9263
++	#include "usb-a9263.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91CAP9
+-- 
+1.5.6.3
+

board/calao/usb-a9263/linux-3.4.4.config

@@ -0,0 +1,102 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9263=y
+CONFIG_MACH_USB_A9263=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_NAND_ATMEL_ECC_SOFT=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/calao/usb-a9g20-lpw/at91bootstrap-1.16-usb-a9g20-lpw.patch

@@ -0,0 +1,610 @@
+From 8d84757d5170969e8bdfebc7951f43c5aa2b05fd Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Fri, 6 Jul 2012 16:32:47 +0200
+Subject: [PATCH] Add support for the Calao-systems USB-A9G20-LPW
+
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ board/usb_a9g20_lpw/nandflash/Makefile        |  121 ++++++++++
+ board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h |  112 +++++++++
+ board/usb_a9g20_lpw/usb_a9g20_lpw.c           |  303 +++++++++++++++++++++++++
+ crt0_gnu.S                                    |    7 +
+ include/part.h                                |    6 +-
+ 5 files changed, 548 insertions(+), 1 deletions(-)
+ create mode 100644 board/usb_a9g20_lpw/nandflash/Makefile
+ create mode 100644 board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+ create mode 100644 board/usb_a9g20_lpw/usb_a9g20_lpw.c
+
+diff --git a/board/usb_a9g20_lpw/nandflash/Makefile b/board/usb_a9g20_lpw/nandflash/Makefile
+new file mode 100644
+index 0000000..8c9d99a
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/Makefile
+@@ -0,0 +1,121 @@
++# TODO: set this appropriately for your local toolchain
++ifndef ERASE_FCT
++ERASE_FCT=rm -f
++endif
++ifndef CROSS_COMPILE
++CROSS_COMPILE=arm-elf-
++endif
++
++TOOLCHAIN=gcc
++
++BOOTSTRAP_PATH=../../..
++
++# NandFlashBoot Configuration for USB-A9G20-LPW
++
++# Target name (case sensitive!!!)
++TARGET=AT91SAM9G20
++# Board name (case sensitive!!!)
++BOARD=usb_a9g20_lpw
++# Link Address and Top_of_Memory
++LINK_ADDR=0x200000
++TOP_OF_MEMORY=0x301000
++# Name of current directory
++PROJECT=nandflash
++
++ifndef BOOT_NAME
++BOOT_NAME=$(PROJECT)_$(BOARD)
++endif
++
++INCL=./$(BOOTSTRAP_PATH)/board/$(BOARD)/$(PROJECT)
++
++ifeq ($(TOOLCHAIN), gcc)
++
++AS=$(CROSS_COMPILE)gcc
++CC=$(CROSS_COMPILE)gcc
++LD=$(CROSS_COMPILE)gcc
++NM= $(CROSS_COMPILE)nm
++SIZE=$(CROSS_COMPILE)size
++OBJCOPY=$(CROSS_COMPILE)objcopy
++OBJDUMP=$(CROSS_COMPILE)objdump
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
++
++# Linker flags.
++#  -Wl,...:     tell GCC to pass this to linker.
++#    -Map:      create map file
++#    --cref:    add cross reference to map file
++LDFLAGS+=-nostartfiles -nostdlib -Wl,-Map=$(BOOT_NAME).map,--cref
++LDFLAGS+=-T $(BOOTSTRAP_PATH)/elf32-littlearm.lds -Ttext $(LINK_ADDR)
++OBJS=crt0_gnu.o
++
++endif
++
++OBJS+=\
++	$(BOARD).o \
++	main.o \
++	gpio.o \
++	pmc.o \
++	debug.o \
++	sdramc.o \
++	nandflash.o \
++	_udivsi3.o \
++	_umodsi3.o \
++	div0.o \
++	udiv.o \
++	string.o
++
++rebuild: clean all
++
++all: 	$(BOOT_NAME)
++
++ifeq ($(TOOLCHAIN), gcc)
++$(BOOT_NAME): $(OBJS)
++	$(LD) $(LDFLAGS) -n -o $(BOOT_NAME).elf $(OBJS)
++	$(OBJCOPY) --strip-debug --strip-unneeded $(BOOT_NAME).elf -O binary $(BOOT_NAME).bin
++endif
++
++
++$(BOARD).o: $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/board/$(BOARD)/$(BOARD).c -o $(BOARD).o
++
++main.o: $(BOOTSTRAP_PATH)/main.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/main.c -o main.o
++
++gpio.o: $(BOOTSTRAP_PATH)/driver/gpio.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/gpio.c -o gpio.o
++
++pmc.o:  $(BOOTSTRAP_PATH)/driver/pmc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/pmc.c -o pmc.o
++
++debug.o: $(BOOTSTRAP_PATH)/driver/debug.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/debug.c -o debug.o
++
++sdramc.o:  $(BOOTSTRAP_PATH)/driver/sdramc.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/sdramc.c -o sdramc.o
++
++dataflash.o:  $(BOOTSTRAP_PATH)/driver/dataflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/dataflash.c -o dataflash.o
++
++nandflash.o:  $(BOOTSTRAP_PATH)/driver/nandflash.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/driver/nandflash.c -o nandflash.o
++
++crt0_gnu.o:  $(BOOTSTRAP_PATH)/crt0_gnu.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/crt0_gnu.S -o crt0_gnu.o
++
++div0.o:  $(BOOTSTRAP_PATH)/lib/div0.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/div0.c -o div0.o
++
++string.o:  $(BOOTSTRAP_PATH)/lib/string.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/string.c -o string.o
++
++udiv.o:  $(BOOTSTRAP_PATH)/lib/udiv.c 
++	$(CC) -c $(CCFLAGS) $(BOOTSTRAP_PATH)/lib/udiv.c -o udiv.o
++
++_udivsi3.o:  $(BOOTSTRAP_PATH)/lib/_udivsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_udivsi3.S -o _udivsi3.o
++
++_umodsi3.o:  $(BOOTSTRAP_PATH)/lib/_umodsi3.S
++	$(AS) $(ASFLAGS) $(BOOTSTRAP_PATH)/lib/_umodsi3.S -o _umodsi3.o
++
++clean:
++	$(ERASE_FCT) *.o *.bin *.elf *.map
+diff --git a/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+new file mode 100644
+index 0000000..c0bdc6e
+--- /dev/null
++++ b/board/usb_a9g20_lpw/nandflash/usb-a9g20-lpw.h
+@@ -0,0 +1,112 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb-a9g20-lpw.h
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#ifndef _USB_A9G20_LPW_H
++#define _USB_A9G20_LPW_H
++
++/* ******************************************************************* */
++/* PMC Settings                                                        */
++/*                                                                     */
++/* The main oscillator is enabled as soon as possible in the c_startup */
++/* and MCK is switched on the main oscillator.                         */
++/* PLL initialization is done later in the hw_init() function          */
++/* ******************************************************************* */
++#define MASTER_CLOCK		(133000000)
++#define PLL_LOCK_TIMEOUT	1000000
++
++/* Set PLLA to 798Mhz */
++#define PLLA_SETTINGS	0x20843F02
++#define PLLB_SETTINGS	0x100F3F02
++
++/* Switch MCK on PLLA output PCK = PLLA/2 = 3 * MCK */
++#define MCKR_SETTINGS		0x1300
++#define MCKR_CSS_SETTINGS	(AT91C_PMC_CSS_PLLA_CLK | MCKR_SETTINGS)
++
++/* ******************************************************************* */
++/* NandFlash Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define AT91C_SMARTMEDIA_BASE	0x40000000
++
++#define AT91_SMART_MEDIA_ALE    (1 << 21)	/* our ALE is AD21 */
++#define AT91_SMART_MEDIA_CLE    (1 << 22)	/* our CLE is AD22 */
++
++#define NAND_DISABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_SODR = AT91C_PIO_PC14;} while(0)
++#define NAND_ENABLE_CE() do { *(volatile unsigned int *)AT91C_PIOC_CODR = AT91C_PIO_PC14;} while(0)
++
++#define NAND_WAIT_READY() while (!(*(volatile unsigned int *)AT91C_PIOC_PDSR & AT91C_PIO_PC13))
++
++
++/* ******************************************************************** */
++/* SMC Chip Select 3 Timings for NandFlash for MASTER_CLOCK = 133000000.*/
++/* Please refer to SMC section in AT91SAM9 datasheet to learn how 	*/
++/* to generate these values. 						*/
++/* ******************************************************************** */
++#define AT91C_SM_NWE_SETUP	(2 << 0)
++#define AT91C_SM_NCS_WR_SETUP	(0 << 8)
++#define AT91C_SM_NRD_SETUP	(2 << 16)
++#define AT91C_SM_NCS_RD_SETUP	(0 << 24)
++  
++#define AT91C_SM_NWE_PULSE 	(4 << 0)
++#define AT91C_SM_NCS_WR_PULSE	(4 << 8)
++#define AT91C_SM_NRD_PULSE	(4 << 16)
++#define AT91C_SM_NCS_RD_PULSE	(4 << 24)
++  
++#define AT91C_SM_NWE_CYCLE 	(7 << 0)
++#define AT91C_SM_NRD_CYCLE	(7 << 16)
++
++#define AT91C_SM_TDF	        (3 << 16)
++
++/* ******************************************************************* */
++/* BootStrap Settings                                                  */
++/*                                                                     */
++/* ******************************************************************* */
++#define IMG_ADDRESS 		0x20000			/* Image Address in NandFlash */
++#define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
++
++#define MACH_TYPE		0x731			/* USB-A9G20 */
++#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++
++/* ******************************************************************* */
++/* Application Settings                                                */
++/* ******************************************************************* */
++#undef CFG_DEBUG
++#undef CFG_DATAFLASH
++
++#define CFG_NANDFLASH
++#undef	NANDFLASH_SMALL_BLOCKS	/* NANDFLASH_LARGE_BLOCKS used instead */
++#undef  CFG_NANDFLASH_RECOVERY
++
++#define	CFG_SDRAM
++#define	CFG_HW_INIT
++
++#endif	/* _USB_A9G20_LPW_H */
+diff --git a/board/usb_a9g20_lpw/usb_a9g20_lpw.c b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+new file mode 100644
+index 0000000..c372307
+--- /dev/null
++++ b/board/usb_a9g20_lpw/usb_a9g20_lpw.c
+@@ -0,0 +1,303 @@
++/* ----------------------------------------------------------------------------
++ *         ATMEL Microcontroller Software Support  -  ROUSSET  -
++ * ----------------------------------------------------------------------------
++ * Copyright (c) 2008, Atmel Corporation
++
++ * All rights reserved.
++ *
++ * Redistribution and use in source and binary forms, with or without
++ * modification, are permitted provided that the following conditions are met:
++ *
++ * - Redistributions of source code must retain the above copyright notice,
++ * this list of conditions and the disclaimer below.
++ *
++ * Atmel's name may not be used to endorse or promote products derived from
++ * this software without specific prior written permission.
++ *
++ * DISCLAIMER: THIS SOFTWARE IS PROVIDED BY ATMEL "AS IS" AND ANY EXPRESS OR
++ * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
++ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT ARE
++ * DISCLAIMED. IN NO EVENT SHALL ATMEL BE LIABLE FOR ANY DIRECT, INDIRECT,
++ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
++ * LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA,
++ * OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF
++ * LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING
++ * NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE,
++ * EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ * ----------------------------------------------------------------------------
++ * File Name           : usb_a9g20_lpw.c
++ * Object              :
++ * Creation            : GH July 6th 2012
++ *-----------------------------------------------------------------------------
++ */
++#include "../../include/part.h"
++#include "../../include/gpio.h"
++#include "../../include/pmc.h"
++#include "../../include/debug.h"
++#include "../../include/sdramc.h"
++#include "../../include/main.h"
++#ifdef CFG_NANDFLASH
++#include "../../include/nandflash.h"
++#endif
++#ifdef CFG_DATAFLASH
++#include "../../include/dataflash.h"
++#endif
++
++static inline unsigned int get_cp15(void)
++{
++	unsigned int value;
++	__asm__("mrc p15, 0, %0, c1, c0, 0" : "=r" (value));
++	return value;
++}
++
++static inline void set_cp15(unsigned int value)
++{
++	__asm__("mcr p15, 0, %0, c1, c0, 0" : : "r" (value));
++}
++
++#ifdef CFG_HW_INIT
++/*----------------------------------------------------------------------------*/
++/* \fn    hw_init							      */
++/* \brief This function performs very low level HW initialization	      */
++/* This function is invoked as soon as possible during the c_startup	      */
++/* The bss segment must be initialized					      */
++/*----------------------------------------------------------------------------*/
++void hw_init(void)
++{
++	unsigned int cp15;
++	
++	/* Configure PIOs */
++	const struct pio_desc hw_pio[] = {
++#ifdef CFG_DEBUG
++		{"RXD", AT91C_PIN_PB(14), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"TXD", AT91C_PIN_PB(15), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Disable watchdog */
++	writel(AT91C_WDTC_WDDIS, AT91C_BASE_WDTC + WDTC_WDMR);
++
++	/* At this stage the main oscillator is supposed to be enabled
++	 * PCK = MCK = MOSC */
++	writel(0x00, AT91C_BASE_PMC + PMC_PLLICPR);
++
++	/* Configure PLLA = MOSC * (PLL_MULA + 1) / PLL_DIVA */
++	pmc_cfg_plla(PLLA_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* PCK = PLLA/2 = 3 * MCK */
++	pmc_cfg_mck(MCKR_SETTINGS, PLL_LOCK_TIMEOUT);
++	/* Switch MCK on PLLA output */
++	pmc_cfg_mck(MCKR_CSS_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure PLLB */
++	pmc_cfg_pllb(PLLB_SETTINGS, PLL_LOCK_TIMEOUT);
++
++	/* Configure CP15 */
++	cp15 = get_cp15();
++	cp15 |= I_CACHE;
++	set_cp15(cp15);
++
++	/* Configure the PIO controller */
++	pio_setup(hw_pio);
++
++	/* Configure the EBI Slave Slot Cycle to 64 */
++	writel((readl((AT91C_BASE_MATRIX + MATRIX_SCFG3)) & ~0xFF) | 0x40, (AT91C_BASE_MATRIX + MATRIX_SCFG3));
++
++#ifdef CFG_DEBUG
++	/* Enable Debug messages on the DBGU */
++	dbg_init(BAUDRATE(MASTER_CLOCK, 115200));
++
++	dbg_print("Start AT91Bootstrap...\n\r");
++#endif /* CFG_DEBUG */
++
++#ifdef CFG_SDRAM
++	/* Initialize the matrix (VDDIOSEL=0: memory voltage = 1.8V ) */
++	writel((readl(AT91C_BASE_CCFG + CCFG_EBICSA) & ~0x00010000) | AT91C_EBI_CS1A_SDRAMC , AT91C_BASE_CCFG + CCFG_EBICSA);
++
++	/* Configure SDRAM Controller */
++	sdram_init(	AT91C_SDRAMC_NC_9  |
++				AT91C_SDRAMC_NR_13 |
++				AT91C_SDRAMC_CAS_3 |
++				AT91C_SDRAMC_NB_4_BANKS |
++				AT91C_SDRAMC_DBW_32_BITS |
++				AT91C_SDRAMC_TWR_3 |
++				AT91C_SDRAMC_TRC_9 |
++				AT91C_SDRAMC_TRP_3 |
++				AT91C_SDRAMC_TRCD_3 |
++				AT91C_SDRAMC_TRAS_6 |
++				AT91C_SDRAMC_TXSR_10,		/* Control Register */
++				(MASTER_CLOCK * 7)/1000000,	/* Refresh Timer Register */
++                                AT91C_SDRAMC_MD_SDRAM);         /* SDRAM (no low power)   */
++
++#endif /* CFG_SDRAM */
++}
++#endif /* CFG_HW_INIT */
++
++#ifdef CFG_SDRAM
++/*------------------------------------------------------------------------------*/
++/* \fn    sdramc_hw_init							*/
++/* \brief This function performs SDRAMC HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void sdramc_hw_init(void)
++{
++	/* Configure PIOs */
++/*	const struct pio_desc sdramc_pio[] = {
++		{"D16", AT91C_PIN_PC(16), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D17", AT91C_PIN_PC(17), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D18", AT91C_PIN_PC(18), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D19", AT91C_PIN_PC(19), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D20", AT91C_PIN_PC(20), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D21", AT91C_PIN_PC(21), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D22", AT91C_PIN_PC(22), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D23", AT91C_PIN_PC(23), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D24", AT91C_PIN_PC(24), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D25", AT91C_PIN_PC(25), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D26", AT91C_PIN_PC(26), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D27", AT91C_PIN_PC(27), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D28", AT91C_PIN_PC(28), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D29", AT91C_PIN_PC(29), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D30", AT91C_PIN_PC(30), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"D31", AT91C_PIN_PC(31), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++*/
++	/* Configure the SDRAMC PIO controller to output PCK0 */
++/*	pio_setup(sdramc_pio); */
++
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_ASR(0));
++	writel(0xFFFF0000, AT91C_BASE_PIOC + PIO_PDR(0));
++
++}
++#endif /* CFG_SDRAM */
++
++#ifdef CFG_DATAFLASH
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_recovery								*/
++/* \brief This function erases DataFlash Page 0 if USR PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++void df_recovery(AT91PS_DF pDf)
++{
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USR PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if ( !pio_get_value(AT91C_PIN_PB(10)) )
++		df_page_erase(pDf, 0);
++#endif
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    df_hw_init								*/
++/* \brief This function performs DataFlash HW initialization			*/
++/*------------------------------------------------------------------------------*/
++void df_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc df_pio[] = {
++		{"MISO",  AT91C_PIN_PA(0), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"MOSI",  AT91C_PIN_PA(1), 0, PIO_DEFAULT, PIO_PERIPH_A},
++		{"SPCK",  AT91C_PIN_PA(2), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS0_DATAFLASH)
++		{"NPCS0", AT91C_PIN_PA(3), 0, PIO_DEFAULT, PIO_PERIPH_A},
++#endif
++#if (AT91C_SPI_PCS_DATAFLASH == AT91C_SPI_PCS1_DATAFLASH)
++		{"NPCS1", AT91C_PIN_PC(11), 0, PIO_DEFAULT, PIO_PERIPH_B},
++#endif
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	pio_setup(df_pio);
++}
++#endif /* CFG_DATAFLASH */
++
++
++
++#ifdef CFG_NANDFLASH
++/*------------------------------------------------------------------------------*/
++/* \fn    nand_recovery						*/
++/* \brief This function erases NandFlash Block 0 if USER PB is pressed 		*/
++/*        during boot sequence							*/
++/*------------------------------------------------------------------------------*/
++#ifdef CFG_NANDFLASH_RECOVERY
++static void nand_recovery(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc usrpb[] = {
++		{"USRPB", AT91C_PIN_PB(10), 0, PIO_PULLUP, PIO_INPUT},
++		{(char *) 0, 0, 0, PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOB), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(usrpb);
++	
++	/* If USER PB is pressed during Boot sequence */
++	/* Erase NandFlash block 0*/
++	if (!pio_get_value(AT91C_PIN_PB(10)) )
++		AT91F_NandEraseBlock0();
++}
++#else
++static void nand_recovery(void) {}
++#endif
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_hw_init							*/
++/* \brief NandFlash HW init							*/
++/*------------------------------------------------------------------------------*/
++void nandflash_hw_init(void)
++{
++	/* Configure PIOs */
++	const struct pio_desc nand_pio[] = {
++		{"RDY_BSY", AT91C_PIN_PC(13), 0, PIO_PULLUP, PIO_INPUT},
++		{"NANDCS",  AT91C_PIN_PC(14), 0, PIO_PULLUP, PIO_OUTPUT},
++		{(char *) 0, 0, 0,  PIO_DEFAULT, PIO_PERIPH_A},
++	};
++
++	/* Setup Smart Media, first enable the address range of CS3 in HMATRIX user interface */
++	writel(readl(AT91C_BASE_CCFG + CCFG_EBICSA) | AT91C_EBI_CS3A_SM, AT91C_BASE_CCFG + CCFG_EBICSA);
++		    
++	/* Configure SMC CS3 */
++ 	writel((AT91C_SM_NWE_SETUP | AT91C_SM_NCS_WR_SETUP | AT91C_SM_NRD_SETUP | AT91C_SM_NCS_RD_SETUP), AT91C_BASE_SMC + SMC_SETUP3);
++  	writel((AT91C_SM_NWE_PULSE | AT91C_SM_NCS_WR_PULSE | AT91C_SM_NRD_PULSE | AT91C_SM_NCS_RD_PULSE), AT91C_BASE_SMC + SMC_PULSE3);
++	writel((AT91C_SM_NWE_CYCLE | AT91C_SM_NRD_CYCLE)						, AT91C_BASE_SMC + SMC_CYCLE3);
++	writel((AT91C_SMC_READMODE | AT91C_SMC_WRITEMODE | AT91C_SMC_NWAITM_NWAIT_DISABLE | 
++  		AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS | AT91C_SM_TDF)						, AT91C_BASE_SMC + SMC_CTRL3);
++
++	/* Configure the PIO controller */
++	writel((1 << AT91C_ID_PIOC), PMC_PCER + AT91C_BASE_PMC);
++	pio_setup(nand_pio);
++	
++	nand_recovery();
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_16bits_dbw_init						*/
++/* \brief Configure SMC in 16 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_16bits_dbw_init(void)
++{
++	writel(readl(AT91C_BASE_SMC + SMC_CTRL3) | AT91C_SMC_DBW_WIDTH_SIXTEEN_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++/*------------------------------------------------------------------------------*/
++/* \fn    nandflash_cfg_8bits_dbw_init						*/
++/* \brief Configure SMC in 8 bits mode						*/
++/*------------------------------------------------------------------------------*/
++void nandflash_cfg_8bits_dbw_init(void)
++{
++	writel((readl(AT91C_BASE_SMC + SMC_CTRL3) & ~(AT91C_SMC_DBW)) | AT91C_SMC_DBW_WIDTH_EIGTH_BITS, AT91C_BASE_SMC + SMC_CTRL3);
++}
++
++#endif /* #ifdef CFG_NANDFLASH */
+diff --git a/crt0_gnu.S b/crt0_gnu.S
+index 042b617..002feef 100644
+--- a/crt0_gnu.S
++++ b/crt0_gnu.S
+@@ -106,6 +106,13 @@ _relocate_to_sram:
+ #endif /* CFG_NORFLASH */
+ 
+ _setup_clocks:
++/* Test if main osc is bypassed */
++	ldr 	r0,=AT91C_PMC_MOR
++	ldr 	r1, [r0]
++	ldr 	r2,=AT91C_CKGR_OSCBYPASS 
++	ands 	r1, r1, r2
++	bne	_init_data	/* branch if OSCBYPASS=1 */
++
+ /* Test if main oscillator is enabled */
+ 	ldr 	r0,=AT91C_PMC_SR
+ 	ldr 	r1, [r0]
+diff --git a/include/part.h b/include/part.h
+index ba5985a..1d7392a 100644
+--- a/include/part.h
++++ b/include/part.h
+@@ -46,7 +46,11 @@
+ 
+ #ifdef AT91SAM9G20
+ #include "AT91SAM9260_inc.h"
+-#include "at91sam9g20ek.h"
++	#ifdef at91sam9g20ek
++	#include "at91sam9g20ek.h"
++	#elif usb_a9g20_lpw
++	#include "usb-a9g20-lpw.h"
++	#endif
+ #endif
+ 
+ #ifdef AT91SAM9261
+-- 
+1.5.6.3
+

board/calao/usb-a9g20-lpw/barebox-2012.07.0-usb-a9g20-lpw.patch

@@ -0,0 +1,12 @@
+diff --git a/arch/arm/configs/usb_a9g20_defconfig b/arch/arm/configs/usb_a9g20_defconfig
+index 30bf380..7716e0e 100644
+--- a/arch/arm/configs/usb_a9g20_defconfig
++++ b/arch/arm/configs/usb_a9g20_defconfig
+@@ -15,6 +15,7 @@ CONFIG_HUSH_FANCY_PROMPT=y
+ CONFIG_CMDLINE_EDITING=y
+ CONFIG_AUTO_COMPLETE=y
+ CONFIG_MENU=y
++# CONFIG_ERRNO_MESSAGES is not set
+ # CONFIG_CONSOLE_ACTIVATE_FIRST is not set
+ CONFIG_CONSOLE_ACTIVATE_ALL=y
+ CONFIG_PARTITION=y

board/calao/usb-a9g20-lpw/linux-3.4.4.config

@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9G20=y
+CONFIG_MACH_USB_A9G20=y
+CONFIG_AT91_SLOW_CLOCK=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_IP_MROUTE=y
+CONFIG_IP_PIMSM_V1=y
+CONFIG_IP_PIMSM_V2=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_EVBUG=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+# CONFIG_HWMON is not set
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_RV3029C2=y
+CONFIG_EXT2_FS=y
+CONFIG_FUSE_FS=m
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_UBIFS_FS_XATTR=y
+CONFIG_UBIFS_FS_ADVANCED_COMPR=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V3_ACL=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/qemu/arm-versatile/linux-3.6.config

@@ -0,0 +1,89 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MACH_VERSATILE_AB=y
+CONFIG_PCI=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE="root=1f03 mem=32M"
+CONFIG_VFP=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+CONFIG_MTD=y
+CONFIG_MTD_PARTITIONS=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_ARM_INTEGRATOR=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_SYM53C8XX_2=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_SMC91X=y
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_SERIO_AMBAKMI=y
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_8250_EXTENDED=y
+CONFIG_SERIAL_8250_MANY_PORTS=y
+CONFIG_SERIAL_8250_SHARE_IRQ=y
+CONFIG_SERIAL_8250_RSA=y
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_LEGACY_PTY_COUNT=16
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+# CONFIG_HWMON is not set
+CONFIG_FB=y
+CONFIG_FB_ARMCLCD=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+CONFIG_SND_ARMAACI=m
+CONFIG_MMC=y
+CONFIG_MMC_ARMMMCI=m
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=m
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_CRAMFS=y
+CONFIG_MINIX_FS=y
+CONFIG_ROMFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=y
+CONFIG_NFSD_V3=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_NLS_CODEPAGE_850=m
+CONFIG_NLS_ISO8859_1=m
+CONFIG_MAGIC_SYSRQ=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+CONFIG_DEBUG_LL=y

board/qemu/arm-versatile/readme.txt

@@ -0,0 +1,8 @@
+Run the emulation with:
+
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=scsi -append "root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=smc91c111 -net user
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer.
+
+Tested with QEMU 1.2.0

board/qemu/arm-vexpress/readme.txt

@@ -0,0 +1,8 @@
+Run the emulation with:
+
+  qemu-system-arm -M vexpress-a9 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=sd -append "console=ttyAMA0,115200 root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer.
+
+Tested with QEMU 1.2.0

board/qemu/microblazebe-mmu/linux-3.6.config

@@ -0,0 +1,68 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_OPT_LIB_ASM=y
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/qemu/microblazebe-mmu/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+ qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 1.2.0

board/qemu/microblazebe-mmu/system.dts

@@ -0,0 +1,367 @@
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		linux,stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <0x1>;
+			xlnx,gen1-assert = <0x1>;
+			xlnx,one-timer-only = <0x0>;
+			xlnx,trig0-assert = <0x1>;
+			xlnx,trig1-assert = <0x1>;
+		} ;
+	} ;
+}  ;

board/qemu/microblazeel-mmu/linux-3.6.config

@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE="rootfs.cpio"
+CONFIG_INITRAMFS_COMPRESSION_GZIP=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EXPERT=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_HOTPLUG is not set
+# CONFIG_BASE_FULL is not set
+# CONFIG_FUTEX is not set
+# CONFIG_EPOLL is not set
+# CONFIG_SIGNALFD is not set
+# CONFIG_SHMEM is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_XILINX_MICROBLAZE0_FAMILY="spartan3adsp"
+CONFIG_XILINX_MICROBLAZE0_USE_MSR_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_PCMP_INSTR=1
+CONFIG_XILINX_MICROBLAZE0_USE_BARREL=1
+CONFIG_XILINX_MICROBLAZE0_USE_HW_MUL=1
+CONFIG_HZ_100=y
+CONFIG_MMU=y
+CONFIG_CMDLINE_BOOL=y
+CONFIG_CMDLINE_FORCE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_XILINX_EMACLITE=y
+# CONFIG_INPUT is not set
+# CONFIG_SERIO is not set
+# CONFIG_VT is not set
+CONFIG_SERIAL_UARTLITE=y
+CONFIG_SERIAL_UARTLITE_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_CIFS=y
+CONFIG_CIFS_STATS=y
+CONFIG_CIFS_STATS2=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DETECT_HUNG_TASK=y
+CONFIG_DEBUG_SLAB=y
+CONFIG_DEBUG_SPINLOCK=y
+CONFIG_DEBUG_INFO=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set

board/qemu/microblazeel-mmu/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+ qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 1.2.0

board/qemu/microblazeel-mmu/system.dts

@@ -0,0 +1,367 @@
+/*
+ * Device Tree Generator version: 1.1
+ *
+ * (C) Copyright 2007-2008 Xilinx, Inc.
+ * (C) Copyright 2007-2009 Michal Simek
+ *
+ * Michal SIMEK <monstr@monstr.eu>
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ * CAUTION: This file is automatically generated by libgen.
+ * Version: Xilinx EDK 10.1.03 EDK_K_SP3.6
+ *
+ * XPS project directory: Xilinx-ML505-ll_temac-sgdma-MMU-FDT-edk101
+ */
+
+/dts-v1/;
+/ {
+	#address-cells = <1>;
+	#size-cells = <1>;
+	compatible = "xlnx,microblaze";
+	hard-reset-gpios = <&LEDs_8Bit 2 1>;
+	model = "testing";
+	DDR2_SDRAM: memory@90000000 {
+		device_type = "memory";
+		reg = < 0x90000000 0x10000000 >;
+	} ;
+	aliases {
+		ethernet0 = &Hard_Ethernet_MAC;
+		serial0 = &RS232_Uart_1;
+	} ;
+	chosen {
+		bootargs = "console=ttyUL0,115200 highres=on";
+		linux,stdout-path = "/plb@0/serial@84000000";
+	} ;
+	cpus {
+		#address-cells = <1>;
+		#cpus = <0x1>;
+		#size-cells = <0>;
+		microblaze_0: cpu@0 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,microblaze-7.10.d";
+			d-cache-baseaddr = <0x90000000>;
+			d-cache-highaddr = <0x9fffffff>;
+			d-cache-line-size = <0x10>;
+			d-cache-size = <0x2000>;
+			device_type = "cpu";
+			i-cache-baseaddr = <0x90000000>;
+			i-cache-highaddr = <0x9fffffff>;
+			i-cache-line-size = <0x10>;
+			i-cache-size = <0x2000>;
+			model = "microblaze,7.10.d";
+			reg = <0>;
+			timebase-frequency = <125000000>;
+			xlnx,addr-tag-bits = <0xf>;
+			xlnx,allow-dcache-wr = <0x1>;
+			xlnx,allow-icache-wr = <0x1>;
+			xlnx,area-optimized = <0x0>;
+			xlnx,cache-byte-size = <0x2000>;
+			xlnx,d-lmb = <0x1>;
+			xlnx,d-opb = <0x0>;
+			xlnx,d-plb = <0x1>;
+			xlnx,data-size = <0x20>;
+			xlnx,dcache-addr-tag = <0xf>;
+			xlnx,dcache-always-used = <0x1>;
+			xlnx,dcache-byte-size = <0x2000>;
+			xlnx,dcache-line-len = <0x4>;
+			xlnx,dcache-use-fsl = <0x1>;
+			xlnx,debug-enabled = <0x1>;
+			xlnx,div-zero-exception = <0x1>;
+			xlnx,dopb-bus-exception = <0x0>;
+			xlnx,dynamic-bus-sizing = <0x1>;
+			xlnx,edge-is-positive = <0x1>;
+			xlnx,family = "virtex5";
+			xlnx,endianness = <0x1>;
+			xlnx,fpu-exception = <0x1>;
+			xlnx,fsl-data-size = <0x20>;
+			xlnx,fsl-exception = <0x0>;
+			xlnx,fsl-links = <0x0>;
+			xlnx,i-lmb = <0x1>;
+			xlnx,i-opb = <0x0>;
+			xlnx,i-plb = <0x1>;
+			xlnx,icache-always-used = <0x1>;
+			xlnx,icache-line-len = <0x4>;
+			xlnx,icache-use-fsl = <0x1>;
+			xlnx,ill-opcode-exception = <0x1>;
+			xlnx,instance = "microblaze_0";
+			xlnx,interconnect = <0x1>;
+			xlnx,interrupt-is-edge = <0x0>;
+			xlnx,iopb-bus-exception = <0x0>;
+			xlnx,mmu-dtlb-size = <0x4>;
+			xlnx,mmu-itlb-size = <0x2>;
+			xlnx,mmu-tlb-access = <0x3>;
+			xlnx,mmu-zones = <0x10>;
+			xlnx,number-of-pc-brk = <0x1>;
+			xlnx,number-of-rd-addr-brk = <0x0>;
+			xlnx,number-of-wr-addr-brk = <0x0>;
+			xlnx,opcode-0x0-illegal = <0x1>;
+			xlnx,pvr = <0x2>;
+			xlnx,pvr-user1 = <0x0>;
+			xlnx,pvr-user2 = <0x0>;
+			xlnx,reset-msr = <0x0>;
+			xlnx,sco = <0x0>;
+			xlnx,unaligned-exceptions = <0x1>;
+			xlnx,use-barrel = <0x1>;
+			xlnx,use-dcache = <0x1>;
+			xlnx,use-div = <0x1>;
+			xlnx,use-ext-brk = <0x1>;
+			xlnx,use-ext-nm-brk = <0x1>;
+			xlnx,use-extended-fsl-instr = <0x0>;
+			xlnx,use-fpu = <0x2>;
+			xlnx,use-hw-mul = <0x2>;
+			xlnx,use-icache = <0x1>;
+			xlnx,use-interrupt = <0x1>;
+			xlnx,use-mmu = <0x3>;
+			xlnx,use-msr-instr = <0x1>;
+			xlnx,use-pcmp-instr = <0x1>;
+		} ;
+	} ;
+	mb_plb: plb@0 {
+		#address-cells = <1>;
+		#size-cells = <1>;
+		compatible = "xlnx,plb-v46-1.03.a", "xlnx,plb-v46-1.00.a", "simple-bus";
+		ranges ;
+		FLASH: flash@a0000000 {
+			bank-width = <2>;
+			compatible = "xlnx,xps-mch-emc-2.00.a", "cfi-flash";
+			reg = < 0xa0000000 0x2000000 >;
+			xlnx,family = "virtex5";
+			xlnx,include-datawidth-matching-0 = <0x1>;
+			xlnx,include-datawidth-matching-1 = <0x0>;
+			xlnx,include-datawidth-matching-2 = <0x0>;
+			xlnx,include-datawidth-matching-3 = <0x0>;
+			xlnx,include-negedge-ioregs = <0x0>;
+			xlnx,include-plb-ipif = <0x1>;
+			xlnx,include-wrbuf = <0x1>;
+			xlnx,max-mem-width = <0x10>;
+			xlnx,mch-native-dwidth = <0x20>;
+			xlnx,mch-plb-clk-period-ps = <0x1f40>;
+			xlnx,mch-splb-awidth = <0x20>;
+			xlnx,mch0-accessbuf-depth = <0x10>;
+			xlnx,mch0-protocol = <0x0>;
+			xlnx,mch0-rddatabuf-depth = <0x10>;
+			xlnx,mch1-accessbuf-depth = <0x10>;
+			xlnx,mch1-protocol = <0x0>;
+			xlnx,mch1-rddatabuf-depth = <0x10>;
+			xlnx,mch2-accessbuf-depth = <0x10>;
+			xlnx,mch2-protocol = <0x0>;
+			xlnx,mch2-rddatabuf-depth = <0x10>;
+			xlnx,mch3-accessbuf-depth = <0x10>;
+			xlnx,mch3-protocol = <0x0>;
+			xlnx,mch3-rddatabuf-depth = <0x10>;
+			xlnx,mem0-width = <0x10>;
+			xlnx,mem1-width = <0x20>;
+			xlnx,mem2-width = <0x20>;
+			xlnx,mem3-width = <0x20>;
+			xlnx,num-banks-mem = <0x1>;
+			xlnx,num-channels = <0x0>;
+			xlnx,priority-mode = <0x0>;
+			xlnx,synch-mem-0 = <0x0>;
+			xlnx,synch-mem-1 = <0x0>;
+			xlnx,synch-mem-2 = <0x0>;
+			xlnx,synch-mem-3 = <0x0>;
+			xlnx,synch-pipedelay-0 = <0x2>;
+			xlnx,synch-pipedelay-1 = <0x2>;
+			xlnx,synch-pipedelay-2 = <0x2>;
+			xlnx,synch-pipedelay-3 = <0x2>;
+			xlnx,tavdv-ps-mem-0 = <0x1adb0>;
+			xlnx,tavdv-ps-mem-1 = <0x3a98>;
+			xlnx,tavdv-ps-mem-2 = <0x3a98>;
+			xlnx,tavdv-ps-mem-3 = <0x3a98>;
+			xlnx,tcedv-ps-mem-0 = <0x1adb0>;
+			xlnx,tcedv-ps-mem-1 = <0x3a98>;
+			xlnx,tcedv-ps-mem-2 = <0x3a98>;
+			xlnx,tcedv-ps-mem-3 = <0x3a98>;
+			xlnx,thzce-ps-mem-0 = <0x88b8>;
+			xlnx,thzce-ps-mem-1 = <0x1b58>;
+			xlnx,thzce-ps-mem-2 = <0x1b58>;
+			xlnx,thzce-ps-mem-3 = <0x1b58>;
+			xlnx,thzoe-ps-mem-0 = <0x1b58>;
+			xlnx,thzoe-ps-mem-1 = <0x1b58>;
+			xlnx,thzoe-ps-mem-2 = <0x1b58>;
+			xlnx,thzoe-ps-mem-3 = <0x1b58>;
+			xlnx,tlzwe-ps-mem-0 = <0x88b8>;
+			xlnx,tlzwe-ps-mem-1 = <0x0>;
+			xlnx,tlzwe-ps-mem-2 = <0x0>;
+			xlnx,tlzwe-ps-mem-3 = <0x0>;
+			xlnx,twc-ps-mem-0 = <0x2af8>;
+			xlnx,twc-ps-mem-1 = <0x3a98>;
+			xlnx,twc-ps-mem-2 = <0x3a98>;
+			xlnx,twc-ps-mem-3 = <0x3a98>;
+			xlnx,twp-ps-mem-0 = <0x11170>;
+			xlnx,twp-ps-mem-1 = <0x2ee0>;
+			xlnx,twp-ps-mem-2 = <0x2ee0>;
+			xlnx,twp-ps-mem-3 = <0x2ee0>;
+			xlnx,xcl0-linesize = <0x4>;
+			xlnx,xcl0-writexfer = <0x1>;
+			xlnx,xcl1-linesize = <0x4>;
+			xlnx,xcl1-writexfer = <0x1>;
+			xlnx,xcl2-linesize = <0x4>;
+			xlnx,xcl2-writexfer = <0x1>;
+			xlnx,xcl3-linesize = <0x4>;
+			xlnx,xcl3-writexfer = <0x1>;
+		} ;
+		Hard_Ethernet_MAC: xps-ll-temac@81c00000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,compound";
+			ranges ;
+			ethernet@81c00000 {
+				compatible = "xlnx,xps-ll-temac-1.01.b", "xlnx,xps-ll-temac-1.00.a";
+				device_type = "network";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 5 2 >;
+				llink-connected = <&PIM3>;
+				local-mac-address = [ 00 0a 35 00 00 00 ];
+				reg = < 0x81c00000 0x40 >;
+				xlnx,bus2core-clk-ratio = <0x1>;
+				xlnx,phy-type = <0x1>;
+				xlnx,phyaddr = <0x1>;
+				xlnx,rxcsum = <0x0>;
+				xlnx,rxfifo = <0x1000>;
+				xlnx,temac-type = <0x0>;
+				xlnx,txcsum = <0x0>;
+				xlnx,txfifo = <0x1000>;
+			} ;
+		} ;
+		IIC_EEPROM: i2c@81600000 {
+			compatible = "xlnx,xps-iic-2.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 6 2 >;
+			reg = < 0x81600000 0x10000 >;
+			xlnx,clk-freq = <0x7735940>;
+			xlnx,family = "virtex5";
+			xlnx,gpo-width = <0x1>;
+			xlnx,iic-freq = <0x186a0>;
+			xlnx,scl-inertial-delay = <0x0>;
+			xlnx,sda-inertial-delay = <0x0>;
+			xlnx,ten-bit-adr = <0x0>;
+		} ;
+		LEDs_8Bit: gpio@81400000 {
+			compatible = "xlnx,xps-gpio-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 7 2 >;
+			reg = < 0x81400000 0x10000 >;
+			xlnx,all-inputs = <0x0>;
+			xlnx,all-inputs-2 = <0x0>;
+			xlnx,dout-default = <0x0>;
+			xlnx,dout-default-2 = <0x0>;
+			xlnx,family = "virtex5";
+			xlnx,gpio-width = <0x8>;
+			xlnx,interrupt-present = <0x1>;
+			xlnx,is-bidir = <0x1>;
+			xlnx,is-bidir-2 = <0x1>;
+			xlnx,is-dual = <0x0>;
+			xlnx,tri-default = <0xffffffff>;
+			xlnx,tri-default-2 = <0xffffffff>;
+			#gpio-cells = <2>;
+			gpio-controller;
+		} ;
+
+		gpio-leds {
+			compatible = "gpio-leds";
+
+			heartbeat {
+				label = "Heartbeat";
+				gpios = <&LEDs_8Bit 4 1>;
+				linux,default-trigger = "heartbeat";
+			};
+
+			yellow {
+				label = "Yellow";
+				gpios = <&LEDs_8Bit 5 1>;
+			};
+
+			red {
+				label = "Red";
+				gpios = <&LEDs_8Bit 6 1>;
+			};
+
+			green {
+				label = "Green";
+				gpios = <&LEDs_8Bit 7 1>;
+			};
+		} ;
+		RS232_Uart_1: serial@84000000 {
+			clock-frequency = <125000000>;
+			compatible = "xlnx,xps-uartlite-1.00.a";
+			current-speed = <115200>;
+			device_type = "serial";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 8 0 >;
+			port-number = <0>;
+			reg = < 0x84000000 0x10000 >;
+			xlnx,baudrate = <0x1c200>;
+			xlnx,data-bits = <0x8>;
+			xlnx,family = "virtex5";
+			xlnx,odd-parity = <0x0>;
+			xlnx,use-parity = <0x0>;
+		} ;
+		SysACE_CompactFlash: sysace@83600000 {
+			compatible = "xlnx,xps-sysace-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 4 2 >;
+			reg = < 0x83600000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,mem-width = <0x10>;
+		} ;
+		debug_module: debug@84400000 {
+			compatible = "xlnx,mdm-1.00.d";
+			reg = < 0x84400000 0x10000 >;
+			xlnx,family = "virtex5";
+			xlnx,interconnect = <0x1>;
+			xlnx,jtag-chain = <0x2>;
+			xlnx,mb-dbg-ports = <0x1>;
+			xlnx,uart-width = <0x8>;
+			xlnx,use-uart = <0x1>;
+			xlnx,write-fsl-ports = <0x0>;
+		} ;
+		mpmc@90000000 {
+			#address-cells = <1>;
+			#size-cells = <1>;
+			compatible = "xlnx,mpmc-4.02.a";
+			ranges ;
+			PIM3: sdma@84600180 {
+				compatible = "xlnx,ll-dma-1.00.a";
+				interrupt-parent = <&xps_intc_0>;
+				interrupts = < 2 2 1 2 >;
+				reg = < 0x84600180 0x80 >;
+			} ;
+		} ;
+		xps_intc_0: interrupt-controller@81800000 {
+			#interrupt-cells = <0x2>;
+			compatible = "xlnx,xps-intc-1.00.a";
+			interrupt-controller ;
+			reg = < 0x81800000 0x10000 >;
+			xlnx,kind-of-intr = <0x100>;
+			xlnx,num-intr-inputs = <0x9>;
+		} ;
+		xps_timer_1: timer@83c00000 {
+			compatible = "xlnx,xps-timer-1.00.a";
+			interrupt-parent = <&xps_intc_0>;
+			interrupts = < 3 2 >;
+			reg = < 0x83c00000 0x10000 >;
+			xlnx,count-width = <0x20>;
+			xlnx,family = "virtex5";
+			xlnx,gen0-assert = <0x1>;
+			xlnx,gen1-assert = <0x1>;
+			xlnx,one-timer-only = <0x0>;
+			xlnx,trig0-assert = <0x1>;
+			xlnx,trig1-assert = <0x1>;
+		} ;
+	} ;
+}  ;

board/qemu/mips-malta/linux-3.6.config

@@ -0,0 +1,76 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips-malta/readme.txt

@@ -0,0 +1,9 @@
+Run the emulation with:
+
+ qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer. No keyboard support has been
+enabled.
+
+Tested with QEMU 1.2.0

board/qemu/mips64-malta/linux-3.6.config

@@ -0,0 +1,78 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_MIPS64_R1=y
+CONFIG_64BIT=y
+CONFIG_64BIT_PHYS_ADDR=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mips64-malta/readme.txt

@@ -0,0 +1,11 @@
+Run the emulation with:
+
+ qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer. No keyboard support has been
+enabled.
+
+This configuration is known to be flaky.
+
+Tested with QEMU 1.2.0

board/qemu/mipsel-malta/linux-3.6.config

@@ -0,0 +1,77 @@
+CONFIG_MIPS_MALTA=y
+CONFIG_CPU_LITTLE_ENDIAN=y
+CONFIG_CPU_MIPS32_R2=y
+CONFIG_MIPS_MT_SMP=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_HZ_100=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=15
+CONFIG_SYSFS_DEPRECATED_V2=y
+CONFIG_RELAY=y
+CONFIG_NAMESPACES=y
+CONFIG_UTS_NS=y
+CONFIG_IPC_NS=y
+CONFIG_PID_NS=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+CONFIG_EMBEDDED=y
+# CONFIG_SYSCTL_SYSCALL is not set
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+CONFIG_MODULE_SRCVERSION_ALL=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PCI=y
+CONFIG_PM=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+# CONFIG_MISC_DEVICES is not set
+CONFIG_IDE=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_GENERIC=y
+CONFIG_BLK_DEV_GENERIC=y
+CONFIG_BLK_DEV_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_FB=y
+CONFIG_FB_CIRRUS=y
+# CONFIG_VGA_CONSOLE is not set
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_QUOTA=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set

board/qemu/mipsel-malta/readme.txt

@@ -0,0 +1,9 @@
+Run the emulation with:
+
+ qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -hda output/images/rootfs.ext2 -append "root=/dev/hda"
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer. No keyboard support has been
+enabled.
+
+Tested with QEMU 1.2.0

board/qemu/powerpc-g3beige/linux-3.6.config

@@ -0,0 +1,86 @@
+CONFIG_ALTIVEC=y
+CONFIG_EXPERIMENTAL=y
+CONFIG_SWAP=y
+CONFIG_SYSVIPC=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_COMPAT_BRK=y
+CONFIG_SLAB=y
+CONFIG_LBDAF=y
+CONFIG_PPC_PMAC=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
+CONFIG_PPC601_SYNC_FIX=y
+CONFIG_HIGHMEM=y
+CONFIG_NO_HZ=y
+CONFIG_BINFMT_ELF=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_PM=y
+CONFIG_SECCOMP=y
+CONFIG_PCCARD=y
+CONFIG_PCMCIA=y
+CONFIG_PCMCIA_LOAD_CIS=y
+CONFIG_PCMCIA_IOCTL=y
+CONFIG_YENTA=y
+CONFIG_ADVANCED_OPTIONS=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_PACKET_MMAP=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_INET_LRO=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+CONFIG_FIRMWARE_IN_KERNEL=y
+CONFIG_CONNECTOR=y
+CONFIG_PROC_EVENTS=y
+CONFIG_BLK_DEV=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_IDE=y
+CONFIG_IDE_GD=y
+CONFIG_IDE_GD_ATA=y
+CONFIG_BLK_DEV_IDECD=y
+CONFIG_IDE_PROC_FS=y
+CONFIG_BLK_DEV_CMD64X=y
+CONFIG_BLK_DEV_IDE_PMAC=y
+CONFIG_IEEE1394=y
+CONFIG_IEEE1394_OHCI1394=y
+CONFIG_IEEE1394_ETH1394=y
+CONFIG_IEEE1394_RAWIO=y
+CONFIG_IEEE1394_VIDEO1394=y
+CONFIG_IEEE1394_DV1394=y
+CONFIG_MACINTOSH_DRIVERS=y
+CONFIG_ADB=y
+CONFIG_ADB_CUDA=y
+CONFIG_ADB_PMU=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_MACE=y
+CONFIG_BMAC=y
+CONFIG_HAPPYMEAL=y
+CONFIG_SUNGEM=y
+CONFIG_CASSINI=y
+CONFIG_NET_PCI=y
+CONFIG_PCNET32=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+CONFIG_8139TOO_PIO=y
+CONFIG_SERIO=y
+CONFIG_SERIAL_PMACZILOG=y
+CONFIG_SERIAL_PMACZILOG_TTYS=y
+CONFIG_SERIAL_PMACZILOG_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SSB=y
+CONFIG_SSB_PCIHOST=y
+CONFIG_SSB_PCMCIAHOST=y
+CONFIG_SSB_DRIVER_PCICORE=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MISC_FILESYSTEMS=y
+CONFIG_SQUASHFS=y
+CONFIG_LIBCRC32C=y
+CONFIG_BOOTX_TEXT=y
+CONFIG_CRYPTO_HW=y

board/qemu/powerpc-g3beige/readme.txt

@@ -0,0 +1,8 @@
+Run the emulation with:
+
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -hda output/images/rootfs.ext2 -append "console=ttyS0 root=/dev/hdc" -serial stdio
+
+The login prompt will appear in the terminal that started Qemu. The
+graphical window is the framebuffer.
+
+Tested with QEMU 1.2.0

board/qemu/powerpc-mpc8544ds/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+ qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 1.2.0

board/qemu/sh4-r2d/linux-3.2.config

@@ -0,0 +1,105 @@
+CONFIG_EXPERIMENTAL=y
+CONFIG_SYSVIPC=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
+# CONFIG_SYSCTL_SYSCALL is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_CPU_SUBTYPE_SH7751R=y
+CONFIG_MEMORY_START=0x0c000000
+CONFIG_FLATMEM_MANUAL=y
+CONFIG_SH_RTS7751R2D=y
+CONFIG_RTS7751R2D_PLUS=y
+CONFIG_HEARTBEAT=y
+CONFIG_PCI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_PATA_PLATFORM=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_8139CP=y
+CONFIG_8139TOO=y
+# CONFIG_8139TOO_PIO is not set
+# CONFIG_WLAN is not set
+CONFIG_INPUT_FF_MEMLESS=m
+# CONFIG_INPUT_MOUSEDEV is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_SH_SCI=y
+CONFIG_SERIAL_SH_SCI_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_SPI=y
+CONFIG_SPI_SH_SCI=y
+CONFIG_MFD_SM501=y
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FB_SH_MOBILE_LCDC=m
+CONFIG_FB_SH_MOBILE_HDMI=m
+CONFIG_FB_SM501=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+# CONFIG_LOGO_LINUX_CLUT224 is not set
+# CONFIG_LOGO_SUPERH_MONO is not set
+# CONFIG_LOGO_SUPERH_VGA16 is not set
+CONFIG_SOUND=y
+CONFIG_SND=m
+CONFIG_SND_YMFPCI=m
+CONFIG_SOUND_PRIME=m
+CONFIG_HID_A4TECH=y
+CONFIG_HID_APPLE=y
+CONFIG_HID_BELKIN=y
+CONFIG_HID_CHERRY=y
+CONFIG_HID_CHICONY=y
+CONFIG_HID_CYPRESS=y
+CONFIG_HID_EZKEY=y
+CONFIG_HID_GYRATION=y
+CONFIG_HID_LOGITECH=y
+CONFIG_HID_MICROSOFT=y
+CONFIG_HID_MONTEREY=y
+CONFIG_HID_PANTHERLORD=y
+CONFIG_HID_PETALYNX=y
+CONFIG_HID_SAMSUNG=y
+CONFIG_HID_SONY=y
+CONFIG_HID_SUNPLUS=y
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_LIBUSUAL=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_R9701=y
+CONFIG_EXT2_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_MINIX_FS=y
+CONFIG_NLS_CODEPAGE_932=y
+CONFIG_DEBUG_FS=y
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRC_T10DIF=y

board/qemu/sh4-r2d/readme.txt

@@ -0,0 +1,8 @@
+Run the emulation with:
+
+  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide -append "root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+The graphical window is the framebuffer.
+
+Tested with QEMU 1.2.0

board/qemu/sparc-ss10/readme.txt

@@ -0,0 +1,8 @@
+Run the emulation with:
+
+  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2 -append "root=/dev/sda console=ttyS0,115200" -serial stdio
+
+The login prompt will appear in the terminal that started Qemu.
+The graphical window is the framebuffer.
+
+Tested with QEMU 1.2.0

board/qemu/x86/linux-3.6.config

@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

board/qemu/x86/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+
+The login prompt will appear in the graphical window.
+
+Tested with QEMU 1.2.0

board/qemu/x86_64/linux-3.6.config

@@ -0,0 +1,67 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+# CONFIG_COMPAT_BRK is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_X86_EXTENDED_PLATFORM is not set
+# CONFIG_SCHED_OMIT_FRAME_POINTER is not set
+# CONFIG_MTRR_SANITIZER is not set
+# CONFIG_SECCOMP is not set
+# CONFIG_RELOCATABLE is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+# CONFIG_IPV6 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+# CONFIG_BLK_DEV is not set
+CONFIG_BLK_DEV_SD=y
+CONFIG_ATA=y
+CONFIG_ATA_PIIX=y
+CONFIG_NETDEVICES=y
+CONFIG_NET_ETHERNET=y
+CONFIG_NET_PCI=y
+CONFIG_NE2K_PCI=y
+CONFIG_8139CP=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+# CONFIG_WLAN is not set
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO_SERPORT is not set
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+# CONFIG_HWMON is not set
+# CONFIG_MFD_SUPPORT is not set
+CONFIG_SOUND=y
+CONFIG_SND=y
+CONFIG_SND_HDA_INTEL=y
+# CONFIG_HID_SUPPORT is not set
+# CONFIG_USB_SUPPORT is not set
+# CONFIG_X86_PLATFORM_DEVICES is not set
+# CONFIG_DMIID is not set
+CONFIG_EXT2_FS=y
+# CONFIG_DNOTIFY is not set
+# CONFIG_INOTIFY_USER is not set
+# CONFIG_MISC_FILESYSTEMS is not set
+CONFIG_NFS_FS=y
+CONFIG_ROOT_NFS=y
+# CONFIG_ENABLE_WARN_DEPRECATED is not set
+# CONFIG_ENABLE_MUST_CHECK is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+# CONFIG_FRAME_POINTER is not set
+# CONFIG_X86_VERBOSE_BOOTUP is not set
+# CONFIG_VIRTUALIZATION is not set

board/qemu/x86_64/readme.txt

@@ -0,0 +1,7 @@
+Run the emulation with:
+
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=ide -append root=/dev/sda
+
+The login prompt will appear in the graphical window.
+
+Tested with QEMU 1.2.0

boot/Config.in

@@ -0,0 +1,16 @@
+menu "Bootloaders"
+
+source "boot/at91bootstrap/Config.in"
+source "boot/at91bootstrap3/Config.in"
+source "boot/at91dataflashboot/Config.in"
+source "boot/barebox/Config.in"
+source "boot/boot-wrapper-aarch64/Config.in"
+source "boot/grub/Config.in"
+source "boot/lpc32xxcdl/Config.in"
+source "boot/mxs-bootlets/Config.in"
+source "boot/syslinux/Config.in"
+source "boot/uboot/Config.in"
+source "boot/xloader/Config.in"
+
+endmenu
+

boot/at91bootstrap/Config.in

@@ -0,0 +1,50 @@
+config BR2_TARGET_AT91BOOTSTRAP
+	depends on BR2_arm926t
+	bool "AT91 Bootstrap"
+	help
+	  AT91Bootstrap is a first level bootloader for the Atmel AT91
+	  devices. It integrates algorithms for:
+	  - Device initialization such as clock configuration, PIO settings...
+	  - Peripheral drivers such as PIO, PMC or SDRAMC...
+	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
+
+if	BR2_TARGET_AT91BOOTSTRAP
+
+config BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named at91bootstrap-<version>-<something>.patch.
+
+	  Most users may leave this empty
+
+config BR2_TARGET_AT91BOOTSTRAP_BOARD
+	string "Bootstrap board"
+	default ""
+	help
+	  This is used to do a make <board>_config
+
+choice
+	prompt "Boot Memory"
+	default BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	help
+	  Select Chip for which AT91 bootstrap should be built
+
+config BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	bool "Data Flash"
+
+config BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+	bool "NAND Flash"
+
+endchoice
+
+config BR2_TARGET_AT91BOOTSTRAP_MEMORY
+	string
+	default	"dataflash"	if	BR2_TARGET_AT91BOOTSTRAP_DATAFLASH
+	default	"nandflash"	if	BR2_TARGET_AT91BOOTSTRAP_NANDFLASH
+
+endif
+
+
+

boot/at91bootstrap/at91bootstrap-1.16-eabi-fix.patch

@@ -0,0 +1,334 @@
+When using an EABI toolchain, the default compilation generates
+references to __aeabi_unwind_cpp_pr0(). This symbol is defined in
+libgcc, but we don't want to use it for a bootloader.
+
+Therefore, this patch passes some additional CFLAGS to disable the
+generation of such references by avoiding unwind tables, exceptions,
+etc.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ board/at91cap9adk/dataflash/Makefile      |    2 +-
+ board/at91cap9adk/norflash/Makefile       |    2 +-
+ board/at91cap9stk/nandflash/Makefile      |    2 +-
+ board/at91sam9260ek/dataflash/Makefile    |    2 +-
+ board/at91sam9260ek/nandflash/Makefile    |    2 +-
+ board/at91sam9261ek/dataflash/Makefile    |    2 +-
+ board/at91sam9261ek/nandflash/Makefile    |    2 +-
+ board/at91sam9263ek/dataflash/Makefile    |    2 +-
+ board/at91sam9263ek/nandflash/Makefile    |    2 +-
+ board/at91sam9g10ek/dataflash/Makefile    |    2 +-
+ board/at91sam9g10ek/nandflash/Makefile    |    2 +-
+ board/at91sam9g20ek/dataflash/Makefile    |    2 +-
+ board/at91sam9g20ek/nandflash/Makefile    |    2 +-
+ board/at91sam9g45ekes/nandflash/Makefile  |    2 +-
+ board/at91sam9m10ekes/dataflash/Makefile  |    2 +-
+ board/at91sam9m10ekes/nandflash/Makefile  |    2 +-
+ board/at91sam9m10g45ek/dataflash/Makefile |    2 +-
+ board/at91sam9m10g45ek/nandflash/Makefile |    2 +-
+ board/at91sam9rlek/dataflash/Makefile     |    2 +-
+ board/at91sam9rlek/nandflash/Makefile     |    2 +-
+ board/at91sam9xeek/dataflash/Makefile     |    2 +-
+ board/at91sam9xeek/nandflash/Makefile     |    2 +-
+ lib/Makefile                              |    2 +-
+ 23 files changed, 23 insertions(+), 23 deletions(-)
+
+Index: Bootstrap-v1.16/board/at91cap9adk/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91cap9adk/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91cap9adk/dataflash/Makefile
+@@ -34,7 +34,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91cap9adk/norflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91cap9adk/norflash/Makefile
++++ Bootstrap-v1.16/board/at91cap9adk/norflash/Makefile
+@@ -34,7 +34,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91cap9stk/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91cap9stk/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91cap9stk/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -D$(BOARD) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ 
+Index: Bootstrap-v1.16/board/at91sam9260ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9260ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9260ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9260ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9260ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9260ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9261ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9261ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9261ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9261ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9261ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9261ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9263ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9263ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9263ek/dataflash/Makefile
+@@ -34,7 +34,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9263ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9263ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9263ek/nandflash/Makefile
+@@ -33,7 +33,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -O0 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g10ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g10ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g10ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g10ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g10ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g10ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g20ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g20ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g20ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g20ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g20ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g20ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9g45ekes/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9g45ekes/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9g45ekes/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10ekes/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10ekes/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10ekes/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10ekes/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10ekes/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10ekes/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10g45ek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10g45ek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10g45ek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9m10g45ek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9m10g45ek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9m10g45ek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -O2 -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -O2 -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9rlek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9rlek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9rlek/dataflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9rlek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9rlek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9rlek/nandflash/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9xeek/dataflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9xeek/dataflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9xeek/dataflash/Makefile
+@@ -38,7 +38,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/board/at91sam9xeek/nandflash/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/board/at91sam9xeek/nandflash/Makefile
++++ Bootstrap-v1.16/board/at91sam9xeek/nandflash/Makefile
+@@ -38,7 +38,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm9 -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm9 -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.
+Index: Bootstrap-v1.16/lib/Makefile
+===================================================================
+--- Bootstrap-v1.16.orig/lib/Makefile
++++ Bootstrap-v1.16/lib/Makefile
+@@ -37,7 +37,7 @@
+ SIZE=$(CROSS_COMPILE)size
+ OBJCOPY=$(CROSS_COMPILE)objcopy
+ OBJDUMP=$(CROSS_COMPILE)objdump
+-CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL)
++CCFLAGS=-g -mcpu=arm926ej-s -Os -Wall -D$(TARGET) -I$(INCL) -fno-exceptions -fno-unwind-tables -fno-asynchronous-unwind-tables
+ ASFLAGS=-g -mcpu=arm926ej-s -c -Os -Wall -D$(TARGET) -I$(INCL) -DTOP_OF_MEM=$(TOP_OF_MEMORY)
+ 
+ # Linker flags.

boot/at91bootstrap/at91bootstrap-1.16-gcc-4.6.x-ldscript-fix.patch

@@ -0,0 +1,29 @@
+From b783d1f9bf985c0981e755bd2c13e091e9d6837f Mon Sep 17 00:00:00 2001
+From: Gregory Hermant <gregory.hermant@calao-systems.com>
+Date: Tue, 6 Nov 2012 09:38:50 +0100
+Subject: [PATCH] at91bootstrap: fix overlap linker issue
+
+The linker script of the at91bootstrap package has to be modified when
+built from gcc-4.6.x version. Indeed a section named text.startup is
+created and has to be added into the text section.
+
+Signed-off-by: Gregory Hermant <gregory.hermant@calao-systems.com>
+---
+ elf32-littlearm.lds |    1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/elf32-littlearm.lds b/elf32-littlearm.lds
+index a33952f..4f3ba25 100644
+--- a/elf32-littlearm.lds
++++ b/elf32-littlearm.lds
+@@ -7,6 +7,7 @@ SECTIONS
+ 	.text : { 
+ 		_stext = .;
+ 		*(.text)
++		*(.text*)
+ 		*(.rodata)                 /* read-only data (constants) */
+ 		*(.rodata*)
+ 		. = ALIGN(4);
+-- 
+1.7.9.5
+

boot/at91bootstrap/at91bootstrap-1.16-u-boot-relocation-fix.patch

@@ -0,0 +1,284 @@
+From d4e4a1aad559e35d84b445d1379be94ad036984e Mon Sep 17 00:00:00 2001
+From: Alexandre Belloni <alexandre.belloni@piout.net>
+Date: Thu, 25 Oct 2012 22:57:14 +0200
+Subject: [PATCH] u-boot relocation fix
+
+Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
+of the relocation changes.
+
+We have to get JUMP_ADDR consistant with what is used by u-boot
+(CONFIG_SYS_TEXT_BASE).
+
+I didn't know what to do with at91sam9m10g45ek as it doesn't seems to be
+converted yet. But anyway, that means that it is either not working or
+doesn't care so changing it here shouldn't harm.
+
+We also have to increase the IMG_SIZE as u-boot as grown larger than the
+default value. As requested on the u-boot ML, we assume that it could
+be up to 495kB big.
+
+It means that now, you have to flash your kernel at 0x00084000 instead
+of 0x00042000. And so you also have to load it from that adress from
+u-boot.
+
+Then, remember that you could decrease IMG_SIZE to boot faster.
+
+Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
+---
+ board/at91sam9260ek/dataflash/at91sam9260ek.h      |    4 ++--
+ board/at91sam9260ek/nandflash/at91sam9260ek.h      |    2 +-
+ board/at91sam9261ek/dataflash/at91sam9261ek.h      |    4 ++--
+ board/at91sam9261ek/nandflash/at91sam9261ek.h      |    2 +-
+ board/at91sam9263ek/dataflash/at91sam9263ek.h      |    4 ++--
+ board/at91sam9263ek/nandflash/at91sam9263ek.h      |    2 +-
+ board/at91sam9g10ek/dataflash/at91sam9g10ek.h      |    4 ++--
+ board/at91sam9g10ek/nandflash/at91sam9g10ek.h      |    2 +-
+ board/at91sam9g20ek/dataflash/at91sam9g20ek.h      |    4 ++--
+ board/at91sam9g20ek/nandflash/at91sam9g20ek.h      |    2 +-
+ board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h  |    2 +-
+ .../at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h  |    2 +-
+ board/at91sam9rlek/dataflash/at91sam9rlek.h        |    4 ++--
+ board/at91sam9rlek/nandflash/at91sam9rlek.h        |    2 +-
+ board/at91sam9xeek/dataflash/at91sam9xeek.h        |    4 ++--
+ board/at91sam9xeek/nandflash/at91sam9xeek.h        |    2 +-
+ 16 files changed, 23 insertions(+), 23 deletions(-)
+
+diff --git a/board/at91sam9260ek/dataflash/at91sam9260ek.h b/board/at91sam9260ek/dataflash/at91sam9260ek.h
+index 1834246..91081a1 100644
+--- a/board/at91sam9260ek/dataflash/at91sam9260ek.h
++++ b/board/at91sam9260ek/dataflash/at91sam9260ek.h
+@@ -74,10 +74,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       0x44B       /* AT91SAM9260-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9260ek/nandflash/at91sam9260ek.h b/board/at91sam9260ek/nandflash/at91sam9260ek.h
+index 2cac601..f8fdff2 100644
+--- a/board/at91sam9260ek/nandflash/at91sam9260ek.h
++++ b/board/at91sam9260ek/nandflash/at91sam9260ek.h
+@@ -92,7 +92,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       	0x44B		/* AT91SAM9260-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9261ek/dataflash/at91sam9261ek.h b/board/at91sam9261ek/dataflash/at91sam9261ek.h
+index 8ce30e9..276ba3d 100644
+--- a/board/at91sam9261ek/dataflash/at91sam9261ek.h
++++ b/board/at91sam9261ek/dataflash/at91sam9261ek.h
+@@ -97,10 +97,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9261ek/nandflash/at91sam9261ek.h b/board/at91sam9261ek/nandflash/at91sam9261ek.h
+index badc3ac..e628c97 100644
+--- a/board/at91sam9261ek/nandflash/at91sam9261ek.h
++++ b/board/at91sam9261ek/nandflash/at91sam9261ek.h
+@@ -114,7 +114,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       	0x350		/* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9263ek/dataflash/at91sam9263ek.h b/board/at91sam9263ek/dataflash/at91sam9263ek.h
+index 5c9da4b..870f9e2 100644
+--- a/board/at91sam9263ek/dataflash/at91sam9263ek.h
++++ b/board/at91sam9263ek/dataflash/at91sam9263ek.h
+@@ -96,10 +96,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 			0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE			0x33900			/* Image Size in DataFlash    */
++#define	IMG_SIZE			0x7BC00			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       		0x4B2       		/* AT91SAM9263-EK */
+-#define JUMP_ADDR			0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR			0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9263ek/nandflash/at91sam9263ek.h b/board/at91sam9263ek/nandflash/at91sam9263ek.h
+index 505afc7..8ab4f46 100644
+--- a/board/at91sam9263ek/nandflash/at91sam9263ek.h
++++ b/board/at91sam9263ek/nandflash/at91sam9263ek.h
+@@ -108,7 +108,7 @@
+ #define	IMG_SIZE	0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       1202       	/* AT91SAM9263-EK */
+-#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR	0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
+index b2faf44..f4f556b 100644
+--- a/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
++++ b/board/at91sam9g10ek/dataflash/at91sam9g10ek.h
+@@ -98,10 +98,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       0x350       /* AT91SAM9261-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g10ek/nandflash/at91sam9g10ek.h b/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
+index 66c40a3..6c3ecda 100644
+--- a/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
++++ b/board/at91sam9g10ek/nandflash/at91sam9g10ek.h
+@@ -115,7 +115,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       	0x350		/* AT91SAM9G10-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
+index eea0439..7fc70d6 100644
+--- a/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
++++ b/board/at91sam9g20ek/dataflash/at91sam9g20ek.h
+@@ -75,10 +75,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
+ 
+ #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9g20ek/nandflash/at91sam9g20ek.h b/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
+index 31bd499..e797e4d 100644
+--- a/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
++++ b/board/at91sam9g20ek/nandflash/at91sam9g20ek.h
+@@ -93,7 +93,7 @@
+ #define	IMG_SIZE		0x40000			/* Image Size in NandFlash */
+ 
+ #define MACH_TYPE		0x658			/* AT91SAM9G20-EK */
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
+index a60fd41..5587a00 100644
+--- a/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
++++ b/board/at91sam9m10ekes/dataflash/at91sam9m10ekes.h
+@@ -89,7 +89,7 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
+ 
+ #define MACH_TYPE		0x9CD			/* AT91SAM9M10-EKES */
+ #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
+diff --git a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
+index 5c726b5..9090097 100644
+--- a/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
++++ b/board/at91sam9m10g45ek/dataflash/at91sam9m10g45ek.h
+@@ -85,7 +85,7 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash */
+ 
+ #define MACH_TYPE		0x726			/* AT91SAM9M10G45-EK */
+ #define JUMP_ADDR		0x73F00000		/* Final Jump Address */
+diff --git a/board/at91sam9rlek/dataflash/at91sam9rlek.h b/board/at91sam9rlek/dataflash/at91sam9rlek.h
+index 05c42dc..150f17e 100644
+--- a/board/at91sam9rlek/dataflash/at91sam9rlek.h
++++ b/board/at91sam9rlek/dataflash/at91sam9rlek.h
+@@ -89,10 +89,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS0_DATAFLASH	/* Boot on SPI NCS0 */
+ 
+ #define IMG_ADDRESS 	0x8400		/* Image Address in DataFlash */
+-#define	IMG_SIZE	0x33900		/* Image Size in DataFlash    */
++#define	IMG_SIZE	0x7BC00		/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE       1326       	/* AT91SAM9RL-EK */
+-#define JUMP_ADDR	0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR	0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9rlek/nandflash/at91sam9rlek.h b/board/at91sam9rlek/nandflash/at91sam9rlek.h
+index 656b4ba..594db8f 100644
+--- a/board/at91sam9rlek/nandflash/at91sam9rlek.h
++++ b/board/at91sam9rlek/nandflash/at91sam9rlek.h
+@@ -112,7 +112,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE       1326       		/* AT91SAM9RL-EK */
+-#define JUMP_ADDR		0x23F00000	/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000	/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9xeek/dataflash/at91sam9xeek.h b/board/at91sam9xeek/dataflash/at91sam9xeek.h
+index 27d1822..08e515d 100644
+--- a/board/at91sam9xeek/dataflash/at91sam9xeek.h
++++ b/board/at91sam9xeek/dataflash/at91sam9xeek.h
+@@ -74,10 +74,10 @@
+ #define AT91C_SPI_PCS_DATAFLASH		AT91C_SPI_PCS1_DATAFLASH	/* Boot on SPI NCS1 */
+ 
+ #define IMG_ADDRESS 		0x8400			/* Image Address in DataFlash */
+-#define	IMG_SIZE		0x33900			/* Image Size in DataFlash    */
++#define	IMG_SIZE		0x7BC00			/* Image Size in DataFlash    */
+ 
+ #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+diff --git a/board/at91sam9xeek/nandflash/at91sam9xeek.h b/board/at91sam9xeek/nandflash/at91sam9xeek.h
+index 5dbc63e..9fac7cb 100644
+--- a/board/at91sam9xeek/nandflash/at91sam9xeek.h
++++ b/board/at91sam9xeek/nandflash/at91sam9xeek.h
+@@ -94,7 +94,7 @@
+ #define	IMG_SIZE		0x40000		/* Image Size in NandFlash    */
+ 
+ #define MACH_TYPE		0x44B			/* AT91SAM9XE-EK same id as AT91SAM9260-EK*/
+-#define JUMP_ADDR		0x23F00000		/* Final Jump Address 	      */
++#define JUMP_ADDR		0x21F00000		/* Final Jump Address 	      */
+ 
+ /* ******************************************************************* */
+ /* Application Settings                                                */
+-- 
+1.7.9.5
+

boot/at91bootstrap/at91bootstrap.mk

@@ -0,0 +1,50 @@
+#############################################################
+#
+# at91bootstrap
+#
+#############################################################
+AT91BOOTSTRAP_VERSION = 1.16
+AT91BOOTSTRAP_SITE = http://www.atmel.com/dyn/resources/prod_documents/
+AT91BOOTSTRAP_SOURCE = AT91Bootstrap$(AT91BOOTSTRAP_VERSION).zip
+
+AT91BOOTSTRAP_BOARD = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_BOARD))
+AT91BOOTSTRAP_MEMORY = $(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_MEMORY))
+AT91BOOTSTRAP_MAKE_SUBDIR = board/$(AT91BOOTSTRAP_BOARD)/$(AT91BOOTSTRAP_MEMORY)
+AT91BOOTSTRAP_BINARY = $(AT91BOOTSTRAP_MAKE_SUBDIR)/$(AT91BOOTSTRAP_MEMORY)_$(AT91BOOTSTRAP_BOARD).bin
+
+AT91BOOTSTRAP_INSTALL_IMAGES = YES
+AT91BOOTSTRAP_INSTALL_TARGET = NO
+
+define AT91BOOTSTRAP_EXTRACT_CMDS
+	unzip -d $(BUILD_DIR) $(DL_DIR)/$(AT91BOOTSTRAP_SOURCE)
+	mv $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)/* $(@D)
+	rmdir $(BUILD_DIR)/Bootstrap-v$(AT91BOOTSTRAP_VERSION)
+endef
+
+ifneq ($(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR)),)
+define AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_AT91BOOTSTRAP_CUSTOM_PATCH_DIR) \
+		at91bootstrap-$(AT91BOOTSTRAP_VERSION)-\*.patch
+endef
+
+AT91BOOTSTRAP_POST_PATCH_HOOKS += AT91BOOTSTRAP_APPLY_CUSTOM_PATCHES
+endif
+
+define AT91BOOTSTRAP_BUILD_CMDS
+	$(MAKE) CROSS_COMPILE=$(TARGET_CROSS) -C $(@D)/$(AT91BOOTSTRAP_MAKE_SUBDIR)
+endef
+
+define AT91BOOTSTRAP_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(AT91BOOTSTRAP_BINARY) $(BINARIES_DIR)
+endef
+
+$(eval $(generic-package))
+
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP),y)
+# we NEED a board name unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(AT91BOOTSTRAP_BOARD),)
+$(error No AT91Bootstrap board name set. Check your BR2_TARGET_AT91BOOTSTRAP_BOARD setting)
+endif
+endif
+endif

boot/at91bootstrap3/Config.in

@@ -0,0 +1,53 @@
+config BR2_TARGET_AT91BOOTSTRAP3
+	depends on BR2_arm926t
+	bool "AT91 Bootstrap 3"
+	help
+	  AT91Bootstrap is a first level bootloader for the Atmel AT91
+	  devices. It integrates algorithms for:
+	  - Device initialization such as clock configuration, PIO settings...
+	  - Peripheral drivers such as PIO, PMC or SDRAMC...
+	  - Physical media algorithm such as DataFlash, NandFlash, NOR Flash...
+
+if BR2_TARGET_AT91BOOTSTRAP3
+
+config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named at91bootstrap3-<something>.patch.
+
+	  Most users may leave this empty
+
+#
+# Configuration selection
+#
+
+choice
+	prompt "AT91 Bootstrap 3 configuration"
+	default BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
+
+config BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
+	bool "Using a defconfig"
+
+config BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG
+	bool "Using a custom config file"
+
+endchoice
+
+config BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG
+	string "Defconfig name"
+	depends on BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG
+	help
+	  Name of the at91bootstrap3 defconfig file to use, without the
+	  trailing _defconfig.  The defconfig is located at
+	  board/<processor>/<board>_defconfig in the at91bootstrap3
+	  tree.
+
+config BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE
+	string "Configuration file path"
+	depends on BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG
+	help
+	  Path to the at91bootstrap3 configuration file
+
+endif # BR2_TARGET_AT91BOOTSTRAP3

boot/at91bootstrap3/at91bootstrap3-u-boot-relocation-fix.patch

@@ -0,0 +1,747 @@
+Every AT91SAM plaforms were broken between 2010.12 and 2011.03 because
+of the relocation changes.
+
+We have to get JUMP_ADDR consistent with what is used by u-boot
+(CONFIG_SYS_TEXT_BASE).
+
+I also chose to "repartition" the dataflash. u-boot is now living at
+0x4000, letting 16kB for the bootstrap. We also have to increase the
+IMG_SIZE as u-boot as grown larger than the default value.
+As requested on the u-boot ML, we assume that it could be up to 512kB
+big.
+
+It means that now, you have to flash your kernel at 0x0008C000 instead
+of 0x00042000. And so you also have to load it from that address from
+u-boot.
+
+Then, remember that you could decrease IMG_SIZE to boot faster.
+
+Signed-off-by: Alexandre Belloni <alexandre.belloni@piout.net>
+Signed-off-by: Simon Dawson <spdawson@gmail.com>
+
+diff -Nurp a/board/afeb9260/afeb9260_defconfig b/board/afeb9260/afeb9260_defconfig
+--- a/board/afeb9260/afeb9260_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/afeb9260/afeb9260_defconfig	2012-07-25 20:52:17.967694276 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91cap9adk/at91cap9adk_defconfig b/board/at91cap9adk/at91cap9adk_defconfig
+--- a/board/at91cap9adk/at91cap9adk_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9adk/at91cap9adk_defconfig	2012-07-25 20:52:30.603693814 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9adk/at91cap9df_defconfig b/board/at91cap9adk/at91cap9df_defconfig
+--- a/board/at91cap9adk/at91cap9df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9adk/at91cap9df_defconfig	2012-07-25 20:52:23.807694041 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9adk/at91cap9f_defconfig b/board/at91cap9adk/at91cap9f_defconfig
+--- a/board/at91cap9adk/at91cap9f_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9adk/at91cap9f_defconfig	2012-07-25 21:25:20.839605245 +0100
+@@ -72,7 +72,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+ CONFIG_IMG_ADDRESS="0x00008000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9stk/at91cap9stk_defconfig b/board/at91cap9stk/at91cap9stk_defconfig
+--- a/board/at91cap9stk/at91cap9stk_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9stk/at91cap9stk_defconfig	2012-07-25 20:52:59.663692456 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9stk/at91cap9stkdf_defconfig b/board/at91cap9stk/at91cap9stkdf_defconfig
+--- a/board/at91cap9stk/at91cap9stkdf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9stk/at91cap9stkdf_defconfig	2012-07-25 20:52:52.255692671 +0100
+@@ -96,8 +96,8 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91cap9stk/at91cap9stkf_defconfig b/board/at91cap9stk/at91cap9stkf_defconfig
+--- a/board/at91cap9stk/at91cap9stkf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91cap9stk/at91cap9stkf_defconfig	2012-07-25 21:25:35.235605140 +0100
+@@ -72,7 +72,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+ CONFIG_IMG_ADDRESS="0x00008000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260dfc_defconfig b/board/at91sam9260ek/at91sam9260dfc_defconfig
+--- a/board/at91sam9260ek/at91sam9260dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260dfc_defconfig	2012-07-25 20:35:23.259739521 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260df_defconfig b/board/at91sam9260ek/at91sam9260df_defconfig
+--- a/board/at91sam9260ek/at91sam9260df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260df_defconfig	2012-07-25 20:34:19.231742964 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260ek_defconfig b/board/at91sam9260ek/at91sam9260ek_defconfig
+--- a/board/at91sam9260ek/at91sam9260ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260ek_defconfig	2012-07-25 20:32:17.711747794 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9260ek/at91sam9260nf_defconfig b/board/at91sam9260ek/at91sam9260nf_defconfig
+--- a/board/at91sam9260ek/at91sam9260nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9260ek/at91sam9260nf_defconfig	2012-07-25 21:25:57.079604719 +0100
+@@ -87,8 +87,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ # CONFIG_DEBUG is not set
+diff -Nurp a/board/at91sam9261ek/at91sam9261dfc_defconfig b/board/at91sam9261ek/at91sam9261dfc_defconfig
+--- a/board/at91sam9261ek/at91sam9261dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261dfc_defconfig	2012-07-25 20:37:07.515735228 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9261ek/at91sam9261df_defconfig b/board/at91sam9261ek/at91sam9261df_defconfig
+--- a/board/at91sam9261ek/at91sam9261df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261df_defconfig	2012-07-25 20:36:44.351735615 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9261ek/at91sam9261ek_defconfig b/board/at91sam9261ek/at91sam9261ek_defconfig
+--- a/board/at91sam9261ek/at91sam9261ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261ek_defconfig	2012-07-25 20:36:09.111737459 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9261ek/at91sam9261nf_defconfig b/board/at91sam9261ek/at91sam9261nf_defconfig
+--- a/board/at91sam9261ek/at91sam9261nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9261ek/at91sam9261nf_defconfig	2012-07-25 21:24:45.843607437 +0100
+@@ -86,8 +86,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263dfc_defconfig b/board/at91sam9263ek/at91sam9263dfc_defconfig
+--- a/board/at91sam9263ek/at91sam9263dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263dfc_defconfig	2012-07-25 20:38:55.555730059 +0100
+@@ -100,9 +100,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263df_defconfig b/board/at91sam9263ek/at91sam9263df_defconfig
+--- a/board/at91sam9263ek/at91sam9263df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263df_defconfig	2012-07-25 20:38:37.395730195 +0100
+@@ -105,11 +105,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263ek_defconfig b/board/at91sam9263ek/at91sam9263ek_defconfig
+--- a/board/at91sam9263ek/at91sam9263ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263ek_defconfig	2012-07-25 20:38:08.379732395 +0100
+@@ -105,11 +105,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9263ek/at91sam9263nf_defconfig b/board/at91sam9263ek/at91sam9263nf_defconfig
+--- a/board/at91sam9263ek/at91sam9263nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9263ek/at91sam9263nf_defconfig	2012-07-25 21:25:39.195605069 +0100
+@@ -89,8 +89,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g10ek/at91sam9g10df_defconfig b/board/at91sam9g10ek/at91sam9g10df_defconfig
+--- a/board/at91sam9g10ek/at91sam9g10df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g10ek/at91sam9g10df_defconfig	2012-07-25 20:40:18.087726292 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20068000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g10ek/at91sam9g10ek_defconfig b/board/at91sam9g10ek/at91sam9g10ek_defconfig
+--- a/board/at91sam9g10ek/at91sam9g10ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g10ek/at91sam9g10ek_defconfig	2012-07-25 20:39:53.543727636 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20068000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g10ek/at91sam9g10nf_defconfig b/board/at91sam9g10ek/at91sam9g10nf_defconfig
+--- a/board/at91sam9g10ek/at91sam9g10nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g10ek/at91sam9g10nf_defconfig	2012-07-25 21:25:28.975605503 +0100
+@@ -86,8 +86,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20068000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20dfc_defconfig b/board/at91sam9g20ek/at91sam9g20dfc_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20dfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20dfc_defconfig	2012-07-25 20:41:48.275722343 +0100
+@@ -97,9 +97,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20df_defconfig b/board/at91sam9g20ek/at91sam9g20df_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20df_defconfig	2012-07-25 20:42:07.091721310 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20ek_defconfig b/board/at91sam9g20ek/at91sam9g20ek_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20ek_defconfig	2012-07-25 20:41:23.179723541 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g20ek/at91sam9g20nf_defconfig b/board/at91sam9g20ek/at91sam9g20nf_defconfig
+--- a/board/at91sam9g20ek/at91sam9g20nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g20ek/at91sam9g20nf_defconfig	2012-07-25 21:25:49.291603975 +0100
+@@ -87,8 +87,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x20058000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9g45ek/at91sam9g45df_defconfig b/board/at91sam9g45ek/at91sam9g45df_defconfig
+--- a/board/at91sam9g45ek/at91sam9g45df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ek/at91sam9g45df_defconfig	2012-07-25 20:47:46.055707221 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ek/at91sam9g45ek_defconfig b/board/at91sam9g45ek/at91sam9g45ek_defconfig
+--- a/board/at91sam9g45ek/at91sam9g45ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ek/at91sam9g45ek_defconfig	2012-07-25 20:47:02.303708341 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ek/at91sam9g45nf_defconfig b/board/at91sam9g45ek/at91sam9g45nf_defconfig
+--- a/board/at91sam9g45ek/at91sam9g45nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ek/at91sam9g45nf_defconfig	2012-07-25 21:25:24.547605601 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ekes/at91sam9g45dfes_defconfig b/board/at91sam9g45ekes/at91sam9g45dfes_defconfig
+--- a/board/at91sam9g45ekes/at91sam9g45dfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ekes/at91sam9g45dfes_defconfig	2012-07-25 20:47:33.895706968 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ekes/at91sam9g45ekes_defconfig b/board/at91sam9g45ekes/at91sam9g45ekes_defconfig
+--- a/board/at91sam9g45ekes/at91sam9g45ekes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ekes/at91sam9g45ekes_defconfig	2012-07-25 20:46:49.043708951 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9g45ekes/at91sam9g45nfes_defconfig b/board/at91sam9g45ekes/at91sam9g45nfes_defconfig
+--- a/board/at91sam9g45ekes/at91sam9g45nfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9g45ekes/at91sam9g45nfes_defconfig	2012-07-25 21:25:44.823604805 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ek/at91sam9m10df_defconfig b/board/at91sam9m10ek/at91sam9m10df_defconfig
+--- a/board/at91sam9m10ek/at91sam9m10df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ek/at91sam9m10df_defconfig	2012-07-25 20:44:34.975714928 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ek/at91sam9m10ek_defconfig b/board/at91sam9m10ek/at91sam9m10ek_defconfig
+--- a/board/at91sam9m10ek/at91sam9m10ek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ek/at91sam9m10ek_defconfig	2012-07-25 20:43:34.543717453 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ek/at91sam9m10nf_defconfig b/board/at91sam9m10ek/at91sam9m10nf_defconfig
+--- a/board/at91sam9m10ek/at91sam9m10nf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ek/at91sam9m10nf_defconfig	2012-07-25 21:21:40.419615800 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ekes/at91sam9m10dfes_defconfig b/board/at91sam9m10ekes/at91sam9m10dfes_defconfig
+--- a/board/at91sam9m10ekes/at91sam9m10dfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ekes/at91sam9m10dfes_defconfig	2012-07-25 20:44:18.687715650 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ekes/at91sam9m10ekes_defconfig b/board/at91sam9m10ekes/at91sam9m10ekes_defconfig
+--- a/board/at91sam9m10ekes/at91sam9m10ekes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ekes/at91sam9m10ekes_defconfig	2012-07-25 20:43:57.255716814 +0100
+@@ -102,10 +102,10 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9m10ekes/at91sam9m10nfes_defconfig b/board/at91sam9m10ekes/at91sam9m10nfes_defconfig
+--- a/board/at91sam9m10ekes/at91sam9m10nfes_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9m10ekes/at91sam9m10nfes_defconfig	2012-07-25 21:26:10.179603831 +0100
+@@ -86,7 +86,7 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
++CONFIG_IMG_SIZE="0x00080000"
+ CONFIG_JUMP_ADDR="0x73F00000"
+ CONFIG_GLBDRV_ADDR="0x7006b000"
+ # CONFIG_LONG_TEST is not set
+diff -Nurp a/board/at91sam9n12ek/at91sam9n12df_defconfig b/board/at91sam9n12ek/at91sam9n12df_defconfig
+--- a/board/at91sam9n12ek/at91sam9n12df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9n12ek/at91sam9n12df_defconfig	2012-07-25 20:52:40.675693207 +0100
+@@ -107,7 +107,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+ CONFIG_IMG_SIZE="0x00050000"
+diff -Nurp a/board/at91sam9rlek/at91sam9rldf_defconfig b/board/at91sam9rlek/at91sam9rldf_defconfig
+--- a/board/at91sam9rlek/at91sam9rldf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9rlek/at91sam9rldf_defconfig	2012-07-25 20:48:53.183703493 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9rlek/at91sam9rlek_defconfig b/board/at91sam9rlek/at91sam9rlek_defconfig
+--- a/board/at91sam9rlek/at91sam9rlek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9rlek/at91sam9rlek_defconfig	2012-07-25 20:48:29.659704460 +0100
+@@ -102,11 +102,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9rlek/at91sam9rlnf_defconfig b/board/at91sam9rlek/at91sam9rlnf_defconfig
+--- a/board/at91sam9rlek/at91sam9rlnf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9rlek/at91sam9rlnf_defconfig	2012-07-25 21:24:49.335607485 +0100
+@@ -85,8 +85,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x2006b000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9x5ek/at91sam9x5df_defconfig b/board/at91sam9x5ek/at91sam9x5df_defconfig
+--- a/board/at91sam9x5ek/at91sam9x5df_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9x5ek/at91sam9x5df_defconfig	2012-07-25 20:52:45.375693059 +0100
+@@ -106,7 +106,7 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+ CONFIG_IMG_SIZE="0x00050000"
+diff -Nurp a/board/at91sam9xeek/at91sam9xedfc_defconfig b/board/at91sam9xeek/at91sam9xedfc_defconfig
+--- a/board/at91sam9xeek/at91sam9xedfc_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xedfc_defconfig	2012-07-25 20:50:10.643699991 +0100
+@@ -96,9 +96,9 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_ADDRESS="0x00004000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_APP_CHECK=y
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9xeek/at91sam9xedf_defconfig b/board/at91sam9xeek/at91sam9xedf_defconfig
+--- a/board/at91sam9xeek/at91sam9xedf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xedf_defconfig	2012-07-25 20:50:26.967699568 +0100
+@@ -103,11 +103,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x23F00000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9xeek/at91sam9xeek_defconfig b/board/at91sam9xeek/at91sam9xeek_defconfig
+--- a/board/at91sam9xeek/at91sam9xeek_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xeek_defconfig	2012-07-25 20:49:46.131699600 +0100
+@@ -103,11 +103,11 @@ CONFIG_LOAD_UBOOT=y
+ # CONFIG_LOAD_64KB is not set
+ # CONFIG_LOAD_1MB is not set
+ # CONFIG_LOAD_4MB is not set
+-CONFIG_IMG_ADDRESS="0x00008400"
++CONFIG_IMG_ADDRESS="0x00004000"
+ CONFIG_SETTING_ADDRESS="0x00408400"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x23F00000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y
+diff -Nurp a/board/at91sam9xeek/at91sam9xenf_defconfig b/board/at91sam9xeek/at91sam9xenf_defconfig
+--- a/board/at91sam9xeek/at91sam9xenf_defconfig	2011-11-18 08:13:09.000000000 +0000
++++ b/board/at91sam9xeek/at91sam9xenf_defconfig	2012-07-25 21:26:05.627603826 +0100
+@@ -88,8 +88,8 @@ CONFIG_LOAD_UBOOT=y
+ CONFIG_IMG_ADDRESS="0x00020000"
+ CONFIG_SETTING_ADDRESS="0x01FE0000"
+ CONFIG_SETTING_SIZE="0x00001000"
+-CONFIG_IMG_SIZE="0x00040000"
+-CONFIG_JUMP_ADDR="0x23F00000"
++CONFIG_IMG_SIZE="0x00080000"
++CONFIG_JUMP_ADDR="0x21F00000"
+ CONFIG_GLBDRV_ADDR="0x23F00000"
+ # CONFIG_LONG_TEST is not set
+ CONFIG_DEBUG=y

boot/at91bootstrap3/at91bootstrap3.mk

@@ -0,0 +1,67 @@
+#############################################################
+#
+# at91bootstrap3
+#
+#############################################################
+AT91BOOTSTRAP3_VERSION = 3.2
+AT91BOOTSTRAP3_SITE = \
+	ftp://www.at91.com/pub/at91bootstrap/AT91Bootstrap$(AT91BOOTSTRAP3_VERSION)
+AT91BOOTSTRAP3_SOURCE = at91bootstrap_9n12.tar.gz
+
+AT91BOOTSTRAP3_INSTALL_IMAGES = YES
+AT91BOOTSTRAP3_INSTALL_TARGET = NO
+
+AT91BOOTSTRAP3_DEFCONFIG = \
+	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG))
+AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE = \
+	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE))
+AT91BOOTSTRAP3_CUSTOM_PATCH_DIR = \
+	$(call qstrip,$(BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_PATCH_DIR))
+
+AT91BOOTSTRAP3_MAKE_OPT = CROSS_COMPILE=$(TARGET_CROSS) DESTDIR=$(BINARIES_DIR)
+
+ifneq ($(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR),)
+define AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(AT91BOOTSTRAP3_CUSTOM_PATCH_DIR) \
+		at91bootstrap3-\*.patch
+endef
+
+AT91BOOTSTRAP3_POST_PATCH_HOOKS += AT91BOOTSTRAP3_APPLY_CUSTOM_PATCHES
+endif
+
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG),y)
+AT91BOOTSTRAP3_SOURCE_CONFIG = \
+	$(@D)/board/*/$(AT91BOOTSTRAP3_DEFCONFIG)_defconfig
+else ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG),y)
+AT91BOOTSTRAP3_SOURCE_CONFIG = $(AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE)
+endif
+
+define AT91BOOTSTRAP3_CONFIGURE_CMDS
+	cp $(AT91BOOTSTRAP3_SOURCE_CONFIG) $(@D)/.config
+	$(SED) 's/image.bin/uImage/' $(@D)/.config
+endef
+
+define AT91BOOTSTRAP3_BUILD_CMDS
+	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) boot
+endef
+
+define AT91BOOTSTRAP3_INSTALL_IMAGES_CMDS
+	$(MAKE) $(AT91BOOTSTRAP3_MAKE_OPT) -C $(@D) bootstrap
+endef
+
+$(eval $(generic-package))
+
+# Checks to give errors that the user can understand
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_DEFCONFIG),y)
+ifeq ($(AT91BOOTSTRAP3_DEFCONFIG),)
+$(error No at91bootstrap3 defconfig name specified, check your BR2_TARGET_AT91BOOTSTRAP3_DEFCONFIG setting)
+endif
+endif
+
+ifeq ($(BR2_TARGET_AT91BOOTSTRAP3_USE_CUSTOM_CONFIG),y)
+ifeq ($(AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE),)
+$(error No at91bootstrap3 configuration file specified, check your BR2_TARGET_AT91BOOTSTRAP3_CUSTOM_CONFIG_FILE setting)
+endif
+endif
+endif

boot/at91dataflashboot/Config.in

@@ -0,0 +1,3 @@
+config BR2_TARGET_AT91DATAFLASHBOOT
+       depends on BR2_arm926t
+       bool "AT91 DataFlashBoot"

boot/at91dataflashboot/at91dataflashboot-1.05-do-not-install.patch

@@ -0,0 +1,22 @@
+Disable the automatic installation of at91dataflashboot since it tries
+to install things to /tftpboot, which is not possible when not
+building as root.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ Makefile |    2 +-
+ 1 file changed, 1 insertion(+), 1 deletion(-)
+
+Index: at91dataflashboot-1.05/Makefile
+===================================================================
+--- at91dataflashboot-1.05.orig/Makefile
++++ at91dataflashboot-1.05/Makefile
+@@ -40,7 +40,7 @@
+ 
+ I=config.h com.h dataflash.h embedded_services.h main.h stdio.h include/AT91RM9200.h include/lib_AT91RM9200.h 
+ 
+-all: 	clean $(BINNAME) $(LSSNAME) install
++all: 	clean $(BINNAME) $(LSSNAME)
+ 	$(SIZE) $(OUTNAME)
+ 
+ # C objects here

boot/at91dataflashboot/at91dataflashboot-1.05-eabi-fixes.patch

@@ -0,0 +1,43 @@
+Get at91dataflashboot to build with EABI toolchains, by providing the
+__aeabi_uidiv and __aeabi_uidivmod symbols. The code is based on
+U-Boot's code.
+
+Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
+---
+ _udivsi3.S |   14 ++++++++++++++
+ 1 file changed, 14 insertions(+)
+
+Index: DataflashBoot-1.05/_udivsi3.S
+===================================================================
+--- DataflashBoot-1.05.orig/_udivsi3.S
++++ DataflashBoot-1.05/_udivsi3.S
+@@ -12,8 +12,11 @@
+ 	.text
+ 	.globl	 __udivsi3
+ 	.type  __udivsi3       ,function
++        .globl  __aeabi_uidiv
++        .type   __aeabi_uidiv ,function
+ 	.align	0
+  __udivsi3      :
++ __aeabi_uidiv:
+ 	cmp	divisor, #0
+ 	beq	Ldiv0
+ 	mov	curbit, #1
+@@ -68,6 +71,17 @@
+ 	mov	r0, #0			@ about as wrong as it could be
+ 	ldmia	sp!, {pc}
+ 	.size  __udivsi3       , . -  __udivsi3
++
++.globl __aeabi_uidivmod
++__aeabi_uidivmod:
++
++        stmfd   sp!, {r0, r1, ip, lr}
++        bl      __aeabi_uidiv
++        ldmfd   sp!, {r1, r2, ip, lr}
++        mul     r3, r0, r2
++        sub     r1, r1, r3
++        mov     pc, lr
++
+ /* # 235 "libgcc1.S" */
+ /* # 320 "libgcc1.S" */
+ /* # 421 "libgcc1.S" */

boot/at91dataflashboot/at91dataflashboot.mk

@@ -0,0 +1,22 @@
+#############################################################
+#
+# DataFlashBoot
+#
+#############################################################
+
+AT91DATAFLASHBOOT_VERSION = 1.05
+AT91DATAFLASHBOOT_SOURCE = DataflashBoot-$(AT91DATAFLASHBOOT_VERSION).tar.bz2
+AT91DATAFLASHBOOT_SITE = ftp://www.at91.com/pub/buildroot/
+
+AT91DATAFLASHBOOT_INSTALL_TARGET = NO
+AT91DATAFLASHBOOT_INSTALL_IMAGES = YES
+
+define AT91DATAFLASHBOOT_BUILD_CMDS
+	make -C $(@D) CROSS_COMPILE=$(TARGET_CROSS)
+endef
+
+define AT91DATAFLASHBOOT_INSTALL_IMAGES_CMDS
+	cp $(@D)/DataflashBoot-$(AT91DATAFLASHBOOT_VERSION).bin $(BINARIES_DIR)
+endef
+
+$(eval $(generic-package))

boot/barebox/Config.in

@@ -0,0 +1,102 @@
+config BR2_TARGET_BAREBOX
+	bool "Barebox"
+	help
+	  The Barebox bootloader, formerly known as U-Boot v2.
+
+	  http://www.barebox.org
+
+if BR2_TARGET_BAREBOX
+choice
+	prompt "version"
+	default BR2_TARGET_BAREBOX_2012_11
+	help
+	  Select the specific Barebox version you want to use
+
+config BR2_TARGET_BAREBOX_2012_08
+	bool "2012.08"
+
+config BR2_TARGET_BAREBOX_2012_09
+	bool "2012.09"
+
+config BR2_TARGET_BAREBOX_2012_10
+	bool "2012.10"
+
+config BR2_TARGET_BAREBOX_2012_11
+	bool "2012.11"
+
+config BR2_TARGET_BAREBOX_CUSTOM_TARBALL
+	bool "Custom tarball"
+
+config BR2_TARGET_BAREBOX_CUSTOM_GIT
+	bool "Custom Git repository"
+
+endchoice
+
+if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
+
+config BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION
+	string "URL of custom Barebox tarball"
+
+endif
+
+config BR2_TARGET_BAREBOX_VERSION
+	string
+	default "2012.08.0"	if BR2_TARGET_BAREBOX_2012_08
+	default "2012.09.0"	if BR2_TARGET_BAREBOX_2012_09
+	default "2012.10.0"	if BR2_TARGET_BAREBOX_2012_10
+	default "2012.11.0"	if BR2_TARGET_BAREBOX_2012_11
+	default "custom"	if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
+	default $BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT
+
+config BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR
+	string "custom patch dir"
+	help
+	  If your board requires custom patches, add the path to the
+	  directory containing the patches here. The patches must be
+	  named barebox-<version>-<something>.patch.
+
+	  Most users may leave this empty
+
+if BR2_TARGET_BAREBOX_CUSTOM_GIT
+
+config BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL
+	string "URL of custom Git repository"
+
+config BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION
+	string "Custom Git version"
+
+endif
+
+
+choice
+	prompt "Barebox configuration"
+	default BR2_TARGET_BAREBOX_USE_DEFCONFIG
+
+config BR2_TARGET_BAREBOX_USE_DEFCONFIG
+	bool "Using a defconfig"
+
+config BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG
+	bool "Using a custom config file"
+
+endchoice
+
+config BR2_TARGET_BAREBOX_BOARD_DEFCONFIG
+	string "board defconfig"
+	depends on BR2_TARGET_BAREBOX_USE_DEFCONFIG
+	help
+	  Name of the board for which Barebox should be built, without
+	  the _defconfig suffix.
+
+
+config BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE
+	string "Configuration file path"
+	depends on BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG
+	help
+	  Path to the barebox configuration file
+
+config BR2_TARGET_BAREBOX_BAREBOXENV
+	bool "bareboxenv tool in target"
+	help
+	  Install bareboxenv tool in target.
+
+endif

boot/barebox/barebox.mk

@@ -0,0 +1,113 @@
+#############################################################
+#
+# Barebox
+#
+#############################################################
+
+BAREBOX_VERSION    = $(call qstrip,$(BR2_TARGET_BAREBOX_VERSION))
+
+ifeq ($(BAREBOX_VERSION),custom)
+# Handle custom Barebox tarballs as specified by the configuration
+BAREBOX_TARBALL = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_TARBALL_LOCATION))
+BAREBOX_SITE    = $(dir $(BAREBOX_TARBALL))
+BAREBOX_SOURCE  = $(notdir $(BAREBOX_TARBALL))
+else ifeq ($(BR2_TARGET_BAREBOX_CUSTOM_GIT),y)
+BAREBOX_SITE        = $(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_GIT_REPO_URL))
+BAREBOX_SITE_METHOD = git
+else
+# Handle stable official Barebox versions
+BAREBOX_SOURCE = barebox-$(BAREBOX_VERSION).tar.bz2
+BAREBOX_SITE = http://www.barebox.org/download/
+endif
+
+BAREBOX_LICENSE = GPLv2 with exceptions
+BAREBOX_LICENSE_FILES = COPYING
+
+ifneq ($(call qstrip,$(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR)),)
+define BAREBOX_APPLY_CUSTOM_PATCHES
+	support/scripts/apply-patches.sh $(@D) $(BR2_TARGET_BAREBOX_CUSTOM_PATCH_DIR) \
+		barebox-$(BAREBOX_VERSION)-\*.patch
+endef
+
+BAREBOX_POST_PATCH_HOOKS += BAREBOX_APPLY_CUSTOM_PATCHES
+endif
+
+BAREBOX_INSTALL_IMAGES = YES
+ifneq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+BAREBOX_INSTALL_TARGET = NO
+endif
+
+ifeq ($(KERNEL_ARCH),i386)
+BAREBOX_ARCH=x86
+else ifeq ($(KERNEL_ARCH),powerpc)
+BAREBOX_ARCH=ppc
+else
+BAREBOX_ARCH=$(KERNEL_ARCH)
+endif
+
+BAREBOX_MAKE_FLAGS = ARCH=$(BAREBOX_ARCH) CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)"
+
+
+ifeq ($(BR2_TARGET_BAREBOX_USE_DEFCONFIG),y)
+BAREBOX_SOURCE_CONFIG = $(@D)/arch/$(BAREBOX_ARCH)/configs/$(call qstrip,$(BR2_TARGET_BAREBOX_BOARD_DEFCONFIG))_defconfig
+else ifeq ($(BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG),y)
+BAREBOX_SOURCE_CONFIG = $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
+endif
+
+define BAREBOX_CONFIGURE_CMDS
+	cp $(BAREBOX_SOURCE_CONFIG) $(@D)/arch/$(BAREBOX_ARCH)/configs/buildroot_defconfig
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D) buildroot_defconfig
+endef
+
+ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+define BAREBOX_BUILD_BAREBOXENV_CMDS
+	$(TARGET_CC) $(TARGET_CFLAGS) $(TARGET_LDFLAGS) -o $(@D)/bareboxenv \
+		$(@D)/scripts/bareboxenv.c
+endef
+endif
+
+define BAREBOX_BUILD_CMDS
+	$(BAREBOX_BUILD_BAREBOXENV_CMDS)
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(@D)
+endef
+
+define BAREBOX_INSTALL_IMAGES_CMDS
+	cp $(@D)/barebox.bin $(BINARIES_DIR)
+endef
+
+ifeq ($(BR2_TARGET_BAREBOX_BAREBOXENV),y)
+define BAREBOX_INSTALL_TARGET_CMDS
+	cp $(@D)/bareboxenv $(TARGET_DIR)/usr/bin
+endef
+endif
+
+$(eval $(generic-package))
+
+ifeq ($(BR2_TARGET_BAREBOX),y)
+# we NEED a board defconfig file unless we're at make source
+ifeq ($(filter source,$(MAKECMDGOALS)),)
+ifeq ($(BAREBOX_SOURCE_CONFIG),)
+$(error No Barebox config file. Check your BR2_TARGET_BAREBOX_BOARD_DEFCONFIG or BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE settings)
+endif
+endif
+
+barebox-menuconfig barebox-xconfig barebox-gconfig barebox-nconfig: barebox-configure
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) \
+		$(subst barebox-,,$@)
+	rm -f $(BAREBOX_DIR)/.stamp_{built,target_installed,images_installed}
+
+barebox-savedefconfig: barebox-configure
+	$(MAKE) $(BAREBOX_MAKE_FLAGS) -C $(BAREBOX_DIR) \
+		$(subst barebox-,,$@)
+
+ifeq ($(BR2_TARGET_BAREBOX_USE_CUSTOM_CONFIG),y)
+barebox-update-config: barebox-configure $(BAREBOX_DIR)/.config
+	cp -f $(BAREBOX_DIR)/.config $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
+
+barebox-update-defconfig: barebox-savedefconfig
+	cp -f $(BAREBOX_DIR)/defconfig $(BR2_TARGET_BAREBOX_CUSTOM_CONFIG_FILE)
+else
+barebox-update-config: ;
+barebox-update-defconfig: ;
+endif
+endif

boot/boot-wrapper-aarch64/Config.in

@@ -0,0 +1,31 @@
+config BR2_TARGET_BOOT_WRAPPER_AARCH64
+	bool "boot-wrapper-aarch64"
+	depends on BR2_aarch64
+	depends on BR2_LINUX_KERNEL
+	help
+	  The boot-wrapper-aarch64 is a small bootloader that makes it
+	  possible to start an Aarch64 kernel inside the available
+	  software simulators for the Aarch64 architecture.
+
+	  git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64.git
+
+if BR2_TARGET_BOOT_WRAPPER_AARCH64
+
+config BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS
+	string "Device Tree Source name"
+	default ""
+	help
+	  Name of the Device Tree Source file to use to generate the
+	  Device Tree Blob that will be embedded in the image
+	  generated by the boot wrapper. Valid names are the .dts
+	  files from arch/arm64/boot/dts/ in the kernel source
+	  tree. The name must be specified without the .dts suffix.
+
+config BR2_TARGET_BOOT_WRAPPER_AARCH64_BOOTARGS
+	string "Kernel bootargs"
+	default ""
+	help
+	  Kernel bootargs to embed inside the image generated by the
+	  boot wrapper.
+
+endif

boot/boot-wrapper-aarch64/boot-wrapper-aarch64.mk

@@ -0,0 +1,29 @@
+#############################################################
+#
+# boot-wrapper-aarch64
+#
+#############################################################
+
+BOOT_WRAPPER_AARCH64_VERSION        = 26b62f586020fd998c6efd43db657eaafeec14da
+BOOT_WRAPPER_AARCH64_SITE           = git://git.kernel.org/pub/scm/linux/kernel/git/cmarinas/boot-wrapper-aarch64.git
+BOOT_WRAPPER_AARCH64_LICENSE        = BSD3c
+BOOT_WRAPPER_AARCH64_LICENSE_FILES  = LICENSE.txt
+BOOT_WRAPPER_AARCH64_DEPENDENCIES   = linux
+BOOT_WRAPPER_AARCH64_INSTALL_IMAGES = YES
+
+BOOT_WRAPPER_AARCH64_DTS = $(call qstrip,$(BR2_TARGET_BOOT_WRAPPER_AARCH64_DTS))
+
+define BOOT_WRAPPER_AARCH64_BUILD_CMDS
+	$(MAKE) \
+		KERNEL=$(BINARIES_DIR)/Image \
+		DTC=$(LINUX_DIR)/scripts/dtc/dtc \
+		FDT_SRC=$(LINUX_DIR)/arch/arm64/boot/dts/$(BOOT_WRAPPER_AARCH64_DTS).dts \
+		CROSS_COMPILE="$(CCACHE) $(TARGET_CROSS)" \
+		BOOTARGS='$(BR2_TARGET_BOOT_WRAPPER_AARCH64_BOOTARGS)' -C $(@D)
+endef
+
+define BOOT_WRAPPER_AARCH64_INSTALL_IMAGES_CMDS
+	cp $(@D)/linux-system.axf $(BINARIES_DIR)
+endef
+
+$(eval $(generic-package))

boot/common.mk

@@ -0,0 +1 @@
+include boot/*/*.mk

boot/grub/Config.in

@@ -0,0 +1,146 @@
+config BR2_TARGET_GRUB
+	bool "grub"
+	depends on BR2_i386 || BR2_x86_64
+	help
+	  The GRand Unified Bootloader for x86 systems.
+
+config BR2_TARGET_GRUB_SPLASH
+	bool "Splashimage support"
+	depends on BR2_TARGET_GRUB
+	help
+	  Add support for splashimage.
+
+	  A splashimage is a 14-color indexed .xpm picture which
+	  is displayed as background for the grub menu.
+
+config BR2_TARGET_GRUB_DISKLESS
+	bool "diskless support"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable diskless support
+
+config BR2_TARGET_GRUB_3c595
+	bool "3Com595 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable 3Com595 driver
+
+config BR2_TARGET_GRUB_3c90x
+	bool "3Com90x driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable 3Com90x driver
+
+config BR2_TARGET_GRUB_davicom
+	bool "Davicom driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Davicom driver
+
+config BR2_TARGET_GRUB_e1000
+	bool "Etherexpress Pro/1000 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Etherexpress Pro/1000 driver
+
+config BR2_TARGET_GRUB_eepro100
+	bool "Etherexpress Pro/100 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Etherexpress Pro/100 driver
+
+config BR2_TARGET_GRUB_epic100
+	bool "SMC 83c170 EPIC/100 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable SMC 83c170 EPIC/100 driver
+
+config BR2_TARGET_GRUB_forcedeth
+	bool "Nvidia Geforce driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Nvidia Geforce driver
+
+config BR2_TARGET_GRUB_natsemi
+	bool "NatSemi DP8381x driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable NatSemi DP8381x driver
+
+config BR2_TARGET_GRUB_ns83820
+	bool "NS83820 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable NS83820 driver
+
+config BR2_TARGET_GRUB_ns8390
+	bool "NE2000 PCI driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable NE2000 PCI driver
+
+config BR2_TARGET_GRUB_pcnet32
+	bool "AMD Lance/PCI PCNet/32 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable AMD Lance/PCI PCNet/32 driver
+
+config BR2_TARGET_GRUB_pnic
+	bool "Bochs Pseudo Nic driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Bochs Pseudo Nic driver
+
+config BR2_TARGET_GRUB_rtl8139
+	bool "Realtek 8139 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Realtek 8139 driver
+
+config BR2_TARGET_GRUB_r8169
+	bool "Realtek 8169 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Realtek 8169 driver
+
+config BR2_TARGET_GRUB_sis900
+	bool "SIS 900 and SIS 7016 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable SIS 900 and SIS 7016 driver
+
+config BR2_TARGET_GRUB_tg3
+	bool "Broadcom Tigon3 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Broadcom Tigon3 driver
+
+config BR2_TARGET_GRUB_tulip
+	bool "Tulip driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Tulip driver
+
+config BR2_TARGET_GRUB_tlan
+	bool "TI ThunderLAN driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable TI ThunderLAN driver
+
+config BR2_TARGET_GRUB_undi
+	bool "PXE UNDI driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable PXE UNDI driver
+
+config BR2_TARGET_GRUB_via_rhine
+	bool "Rhine-I/II driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Rhine-I/II driver
+
+config BR2_TARGET_GRUB_w89c840
+	bool "Winbond W89c840 driver"
+	depends on BR2_TARGET_GRUB
+	help
+	  enable Winbond W89c840 driver

boot/grub/grub.mk

@@ -0,0 +1,88 @@
+#############################################################
+#
+# grub
+#
+#############################################################
+
+GRUB_VERSION = 0.97
+GRUB_SOURCE = grub_$(GRUB_VERSION).orig.tar.gz
+GRUB_PATCH  = grub_$(GRUB_VERSION)-35.diff.gz
+GRUB_SITE   = http://snapshot.debian.org/archive/debian/20080329T000000Z/pool/main/g/grub/
+
+GRUB_LICENSE = GPLv2+
+GRUB_LICENSE_FILES = COPYING
+
+GRUB_CFLAGS=-DSUPPORT_LOOPDEV
+ifeq ($(BR2_LARGEFILE),)
+GRUB_CFLAGS+=-U_FILE_OFFSET_BITS
+endif
+
+GRUB_CONFIG-$(BR2_TARGET_GRUB_SPLASH) += --enable-graphics
+GRUB_CONFIG-$(BR2_TARGET_GRUB_DISKLESS) += --enable-diskless
+GRUB_CONFIG-$(BR2_TARGET_GRUB_3c595) += --enable-3c595
+GRUB_CONFIG-$(BR2_TARGET_GRUB_3c90x) += --enable-3c90x
+GRUB_CONFIG-$(BR2_TARGET_GRUB_davicom) += --enable-davicom
+GRUB_CONFIG-$(BR2_TARGET_GRUB_e1000) += --enable-e1000
+GRUB_CONFIG-$(BR2_TARGET_GRUB_eepro100) += --enable-eepro100
+GRUB_CONFIG-$(BR2_TARGET_GRUB_epic100) += --enable-epic100
+GRUB_CONFIG-$(BR2_TARGET_GRUB_forcedeth) += --enable-forcedeth
+GRUB_CONFIG-$(BR2_TARGET_GRUB_natsemi) += --enable-natsemi
+GRUB_CONFIG-$(BR2_TARGET_GRUB_ns83820) += --enable-ns83820
+GRUB_CONFIG-$(BR2_TARGET_GRUB_ns8390) += --enable-ns8390
+GRUB_CONFIG-$(BR2_TARGET_GRUB_pcnet32) += --enable-pcnet32
+GRUB_CONFIG-$(BR2_TARGET_GRUB_pnic) += --enable-pnic
+GRUB_CONFIG-$(BR2_TARGET_GRUB_rtl8139) += --enable-rtl8139
+GRUB_CONFIG-$(BR2_TARGET_GRUB_r8169) += --enable-r8169
+GRUB_CONFIG-$(BR2_TARGET_GRUB_sis900) += --enable-sis900
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tg3) += --enable-tg3
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tulip) += --enable-tulip
+GRUB_CONFIG-$(BR2_TARGET_GRUB_tlan) += --enable-tlan
+GRUB_CONFIG-$(BR2_TARGET_GRUB_undi) += --enable-undi
+GRUB_CONFIG-$(BR2_TARGET_GRUB_via_rhine) += --enable-via-rhine
+GRUB_CONFIG-$(BR2_TARGET_GRUB_w89c840) += --enable-w89c840
+
+define GRUB_DEBIAN_PATCHES
+	# Apply the patches from the Debian patch
+	(cd $(@D) ; for f in `cat debian/patches/00list | grep -v ^#` ; do \
+		cat debian/patches/$$f | patch -g0 -p1 ; \
+	done)
+endef
+
+GRUB_POST_PATCH_HOOKS += GRUB_DEBIAN_PATCHES
+
+GRUB_CONF_ENV = \
+	CFLAGS="$(TARGET_CFLAGS) $(GRUB_CFLAGS)"
+
+GRUB_CONF_OPT = \
+	--disable-auto-linux-mem-opt \
+	$(GRUB_CONFIG-y)
+
+define GRUB_INSTALL_STAGING_CMDS
+	install -m 0755 -D $(@D)/grub/grub $(STAGING_DIR)/sbin/grub
+endef
+
+ifeq ($(BR2_TARGET_GRUB_SPLASH),y)
+define GRUB_INSTALL_SPLASH
+	cp boot/grub/splash.xpm.gz $(TARGET_DIR)/boot/grub/
+endef
+endif
+
+define GRUB_INSTALL_TARGET_CMDS
+	install -m 0755 -D $(@D)/grub/grub $(TARGET_DIR)/sbin/grub
+	mkdir -p $(TARGET_DIR)/boot/grub
+	cp $(@D)/stage1/stage1 $(TARGET_DIR)/boot/grub
+	cp $(@D)/stage2/*1_5   $(TARGET_DIR)/boot/grub
+	cp $(@D)/stage2/stage2 $(TARGET_DIR)/boot/grub
+	$(GRUB_INSTALL_SPLASH)
+endef
+
+define GRUB_UNINSTALL_STAGING_CMDS
+	rm -f $(STAGING_DIR)/sbin/grub
+endef
+
+define GRUB_UNINSTALL_TARGET_CMDS
+	rm -f $(TARGET_DIR)/sbin/grub
+	rm -rf $(TARGET_DIR)/boot/grub
+endef
+
+$(eval $(autotools-package))

boot/lpc32xxcdl/Config.in

@@ -0,0 +1,10 @@
+config BR2_TARGET_LPC32XXCDL
+	depends on BR2_arm926t
+	bool "LPC32XX CDL (kickstart and S1L)"
+
+if BR2_TARGET_LPC32XXCDL
+
+config BR2_TARGET_LPC32XXCDL_BOARDNAME
+	string "LPC32xx board name"
+
+endif #BR2_TARGET_LPC32XXCDL

boot/lpc32xxcdl/lpc32xxcdl-2.11-compiler_name.patch

@@ -0,0 +1,52 @@
+Use CROSS_COMPILE as compiler name and stop using libc
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ makerule/lpc32xx/make.lpc32xx.gnu |   22 +++++++++++-----------
+ 1 files changed, 11 insertions(+), 11 deletions(-)
+
+diff --git a/makerule/lpc32xx/make.lpc32xx.gnu b/makerule/lpc32xx/make.lpc32xx.gnu
+index 1014c28..3277d99 100644
+--- a/makerule/lpc32xx/make.lpc32xx.gnu
++++ b/makerule/lpc32xx/make.lpc32xx.gnu
+@@ -27,19 +27,19 @@ CFLAGS   += -mno-sched-prolog -fno-hosted -mno-thumb-interwork -ffunction-sectio
+ CFLAGS   += -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+ AFLAGS   = -mcpu=arm926ej-s
+ AFLAGS   += -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+-CC       = arm-none-eabi-gcc
+-AS       = arm-none-eabi-as
+-AR       = arm-none-eabi-ar -r
+-LD       = arm-none-eabi-gcc
+-NM       = arm-none-eabi-nm
+-OBJDUMP  = arm-none-eabi-objdump
+-OBJCOPY  = arm-none-eabi-objcopy
+-READELF  = arm-none-eabi-readelf
++CC       = $(CROSS_COMPILE)gcc
++AS       = $(CROSS_COMPILE)as
++AR       = $(CROSS_COMPILE)ar -r
++LD       = $(CROSS_COMPILE)gcc
++NM       = $(CROSS_COMPILE)nm
++OBJDUMP  = $(CROSS_COMPILE)objdump
++OBJCOPY  = $(CROSS_COMPILE)objcopy
++READELF  = $(CROSS_COMPILE)readelf
+ LDFLAGS  += -Wl,--gc-sections
+ 
+ LK       =  -static
+ LK       += -Wl,--start-group $(TARGET_CSP_LIB) $(TARGET_BSP_LIB) $(TARGET_GEN_LIB)
+-LK       +=  -lgcc -lc -lg -lm -lstdc++ -lsupc++ 
++LK       +=  -nostdlib -lgcc #-lc -lg -lm -lstdc++ -lsupc++ 
+ LK       += -Wl,--end-group
+ MAP      = -Xlinker -Map -Xlinker
+ LDESC    = -Xlinker -T  
+@@ -47,6 +47,6 @@ ENTRY    = -e
+ BIN      = -bin
+ EXT      = .elf
+ LEXT     = 
+-ELFTOREC =arm-none-eabi-objcopy -O srec --strip-all --verbose
+-ELFTOBIN =arm-none-eabi-objcopy -I elf32-littlearm -O binary --strip-all --verbose
++ELFTOREC = $(OBJCOPY) -O srec --strip-all --verbose
++ELFTOBIN = $(OBJCOPY) -I elf32-littlearm -O binary --strip-all --verbose
+ REC      =.srec
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/lpc32xxcdl-2.11-delete_redundant_files.patch

@@ -0,0 +1,969 @@
+Remove duplicated files to stop the linker from complaining about duplicate
+symbols
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sysapi_timer.c	2011-10-05 19:10:37.000000000 +0200
++++ /dev/null	2012-01-01 16:39:47.918907000 +0100
+@@ -1,212 +0,0 @@
+-/***********************************************************************
+- * $Id:: sysapi_timer.c 3394 2010-05-06 17:56:27Z usb10132             $
+- *
+- * Project: Time support functions
+- *
+- * Description:
+- *     Implements the following functions required for the S1L API
+- *         time_init
+- *         time_reset
+- *         time_start
+- *         time_stop
+- *         time_get
+- *         time_get_rate
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only  
+- * which provides customers with programming information regarding the  
+- * products. This software is supplied "AS IS" without any warranties.  
+- * NXP Semiconductors assumes no responsibility or liability for the 
+- * use of the software, conveys no license or title under any patent, 
+- * copyright, or mask work right to the product. NXP Semiconductors 
+- * reserves the right to make changes in the software without 
+- * notification. NXP Semiconductors also make no representation or 
+- * warranty that such application will be suitable for the specified 
+- * use without further testing or modification. 
+- **********************************************************************/
+-
+-#include "s1l_sys_inf.h"
+-#include "lpc32xx_intc_driver.h"
+-#include "lpc32xx_timer_driver.h"
+-
+-static UNS_64 base_rate;
+-static INT_32 tdev = 0;
+-
+-/***********************************************************************
+- *
+- * Function: time_init
+- *
+- * Purpose: Initializes time system
+- *
+- * Processing: Initializes the system timer.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: 0 if the init failed, otherwise non-zero
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-INT_32 time_init(void)
+-{
+-	TMR_PSCALE_SETUP_T pscale;
+-
+-	/* Open timer driver */
+-	if (tdev == 0)
+-	{
+-		tdev = timer_open((void *) TIMER_CNTR0, 0);
+-		if (tdev != 0)
+-		{
+-			/* Use a prescale count to 100000 */
+-			pscale.ps_tick_val = 100000;
+-			pscale.ps_us_val = 0; /* Not needed when ps_tick_val != 0 */
+-			timer_ioctl(tdev, TMR_SETUP_PSCALE, (INT_32) &pscale);
+-
+-			/* Get timer clock rate */
+-			base_rate = (UNS_64) timer_ioctl(tdev, TMR_GET_STATUS,
+-				TMR_GET_CLOCK);
+-		}
+-	}
+-
+-	return tdev;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_reset
+- *
+- * Purpose: Resets system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_reset(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_RESET, 1);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_start
+- *
+- * Purpose: Starts system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_start(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_ENABLE, 1);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_stop
+- *
+- * Purpose: Stops system timer
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void time_stop(void)
+-{
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_ENABLE, 0);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get
+- *
+- * Purpose: Returns current system time value
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The number of ticks of the timer counter
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get(void)
+-{
+-	TMR_COUNTS_T tcounts;
+-	UNS_64 ticks = 0;
+-
+-	if (tdev != 0)
+-	{
+-		timer_ioctl(tdev, TMR_GET_COUNTS, (INT_32) &tcounts);
+-
+-		/* Compute number of timer ticks */
+-		ticks = (UNS_64) tcounts.count_val * 100000;
+-		ticks = ticks + (UNS_64) tcounts.ps_count_val;
+-	}
+-
+-	return ticks;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: time_get_rate
+- *
+- * Purpose:
+- *     Returns base tick rate (ticks per second) of the time counter
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: The timer tick rate (in ticks per second)
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-UNS_64 time_get_rate(void)
+-{
+-	return base_rate;
+-}
+-
+--- a/csps/lpc32xx/bsps/fdi3250/startup/examples/s1l/sys_mmu_cmd_group.c	2011-10-05 19:10:37.000000000 +0200
++++ /dev/null	2012-01-01 16:39:47.918907000 +0100
+@@ -1,746 +0,0 @@
+-/***********************************************************************
+- * $Id:: sys_mmu_cmd_group.c 3430 2010-05-07 17:39:08Z usb10132        $
+- *
+- * Project: Command processor for peek, poke, dump, and fill
+- *
+- * Description:
+- *     Processes commands from the command prompt
+- *
+- ***********************************************************************
+- * Software that is described herein is for illustrative purposes only  
+- * which provides customers with programming information regarding the  
+- * products. This software is supplied "AS IS" without any warranties.  
+- * NXP Semiconductors assumes no responsibility or liability for the 
+- * use of the software, conveys no license or title under any patent, 
+- * copyright, or mask work right to the product. NXP Semiconductors 
+- * reserves the right to make changes in the software without 
+- * notification. NXP Semiconductors also make no representation or 
+- * warranty that such application will be suitable for the specified 
+- * use without further testing or modification. 
+- **********************************************************************/
+-
+-#include "lpc_arm922t_cp15_driver.h"
+-#include "lpc_string.h"
+-#include "startup.h"
+-#include "s1l_cmds.h"
+-#include "s1l_sys_inf.h"
+-
+-/* dcache command */
+-BOOL_32 cmd_dcache(void);
+-static UNS_32 cmd_dcache_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "dcache" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_dcache_cmd =
+-{
+-	(UNS_8 *) "dcache",
+-	cmd_dcache,
+-	(UNS_8 *) "Enables, disables, or flushes data cache",
+-	(UNS_8 *) "dcache [0(disable), 1(enable), 2(flush)]",
+-	cmd_dcache_plist,
+-	NULL
+-};
+-
+-/* icache command */
+-BOOL_32 cmd_icache(void);
+-static UNS_32 cmd_icache_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "icache" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_icache_cmd =
+-{
+-	(UNS_8 *) "icache",
+-	cmd_icache,
+-	(UNS_8 *) "Enables or disables instruction cache",
+-	(UNS_8 *) "icache [0(disable), 1(enable)]",
+-	cmd_icache_plist,
+-	NULL
+-};
+-
+-/* inval command */
+-BOOL_32 cmd_inval(void);
+-static UNS_32 cmd_inval_plist[] =
+-{
+-	(PARSE_TYPE_STR | PARSE_TYPE_END) /* The "inval" command */
+-};
+-static CMD_ROUTE_T core_inval_cmd =
+-{
+-	(UNS_8 *) "inval",
+-	cmd_inval,
+-	(UNS_8 *) "Flushes data cache and invalidates instruction cache",
+-	(UNS_8 *) "inval",
+-	cmd_inval_plist,
+-	NULL
+-};
+-
+-/* mmuenab command */
+-BOOL_32 cmd_mmuenab(void);
+-static UNS_32 cmd_mmuenab_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "mmuenab" command */
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END)
+-};
+-static CMD_ROUTE_T core_mmuenab_cmd =
+-{
+-	(UNS_8 *) "mmuenab",
+-	cmd_mmuenab,
+-	(UNS_8 *) "Enables or disables the MMU",
+-	(UNS_8 *) "mmuenab [0(disable), 1(enable)]",
+-	cmd_mmuenab_plist,
+-	NULL
+-};
+-
+-/* map command */
+-BOOL_32 cmd_map(void);
+-static UNS_32 cmd_map_plist[] =
+-{
+-	(PARSE_TYPE_STR), /* The "map" command */
+-	(PARSE_TYPE_HEX),
+-	(PARSE_TYPE_HEX),
+-	(PARSE_TYPE_DEC),
+-	(PARSE_TYPE_DEC | PARSE_TYPE_END),
+-};
+-static CMD_ROUTE_T core_map_cmd =
+-{
+-	(UNS_8 *) "map",
+-	cmd_map,
+-	(UNS_8 *) "Maps a range of physical address sections to virtual addresses",
+-	(UNS_8 *) "map [virt hex addr][phy hex addr][sections][0(uncached), 1(cached), 2(unmap)]",
+-	cmd_map_plist,
+-	NULL
+-};
+-
+-/* mmuinfo command */
+-static BOOL_32 cmd_mmuinfo(void);
+-static UNS_32 cmd_mmuinfo_plist[] =
+-{
+-	(PARSE_TYPE_STR | PARSE_TYPE_END) /* The "mmuinfo" command */
+-};
+-static CMD_ROUTE_T core_mmuinfo_cmd =
+-{
+-	(UNS_8 *) "mmuinfo",
+-	cmd_mmuinfo,
+-	(UNS_8 *) "Dumps page table and MMU info",
+-	(UNS_8 *) "mmuinfo",
+-	cmd_mmuinfo_plist,
+-	NULL
+-};
+-
+-/* MMU group */
+-static GROUP_LIST_T mmu_group =
+-{
+-	(UNS_8 *) "mmu", /* mmu group */
+-	(UNS_8 *) "MMU command group",
+-	NULL,
+-	NULL
+-};
+-
+-static UNS_8 enabled_msg [] =" enabled";
+-static UNS_8 disabled_msg [] =" disabled";
+-static UNS_8 dcache_msg[] = "Data cache";
+-static UNS_8 icache_msg[] = "Instruction cache";
+-static UNS_8 pagetab_msg[] = "Page table at address: ";
+-static UNS_8 slist_msg[] = "Type        Virt       Phy        fl Size";
+-static UNS_8 mmu_msg [] ="MMU";
+-static UNS_8 cpage_msg[] = "Coarse page:";
+-static UNS_8 fpage_msg[] = "Fine page  :";
+-static UNS_8 sect_msg[] =  "Section    :";
+-static UNS_8 mbytes_msg[] = "M";
+-static UNS_8 map1_err_msg[] =
+-	"Error : section addresses must be aligned on a 32-bit boundary";
+-static UNS_8 map2_err_msg[] =
+-	"Error : Number of sections exceeds address range of device";
+-static UNS_8 phya_msg[] = "Virtual address ";
+-static UNS_8 mapped_msg[] = " mapped to physical address ";
+-static UNS_8 unmapped_msg[] = " unmapped from physical address ";
+-static UNS_8 cached_msg[] = " (cached)";
+-static UNS_8 inval_msg[] = " invalidated";
+-static UNS_8 caches_msg [] ="Caches";
+-static UNS_8 flushed_msg[] = " flushed";
+-
+-/***********************************************************************
+- *
+- * Function: show_section
+- *
+- * Purpose: Display section information
+- *
+- * Processing:
+- *     See function.
+- *
+- * Parameters:
+- *     mmu_reg   : MMU settings for this section
+- *     virt_addr : Starting virtual address for this section
+- *     segs      : Number of 1M segments for this section
+- *
+- * Outputs: None
+- *
+- * Returns: Nothing
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static void show_section(UNS_32 mmu_reg,
+-						 UNS_32 virt_addr,
+-						 UNS_32 segs) 
+-{
+-	UNS_8 straddr [16];
+-	UNS_32 mmu_phy;
+-
+-	if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) !=
+-		ARM922T_L1D_TYPE_FAULT) 
+-	{
+-		if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-			ARM922T_L1D_TYPE_CPAGE) 
+-		{
+-			term_dat_out(cpage_msg);
+-		}
+-		else if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-			ARM922T_L1D_TYPE_FPAGE) 
+-		{
+-			term_dat_out(fpage_msg);
+-		}
+-		else
+-		{
+-			term_dat_out(sect_msg);
+-		}
+-
+-		/* Compute virtual address */
+-		str_makehex(straddr, virt_addr, 8);
+-		term_dat_out(straddr);
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* Compute mapped physical address */
+-		if ((mmu_reg & ARM922T_L1D_TYPE_PG_SN_MASK) ==
+-		ARM922T_L1D_TYPE_SECTION) 
+-		{
+-			mmu_phy = mmu_reg & 0xFFF00000;
+-		}
+-		else 
+-		{
+-			/* Don't compute addresses for non-sections */
+-			mmu_phy = 0;
+-		}
+-		str_makehex(straddr, mmu_phy, 8);
+-		term_dat_out(straddr);
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* MMU flags */
+-		if ((mmu_reg & ARM922T_L1D_BUFFERABLE) != 0) 
+-		{
+-			term_dat_out((UNS_8 *) "b");
+-		}
+-		else 
+-		{
+-			term_dat_out((UNS_8 *) " ");
+-		}
+-		if ((mmu_reg & ARM922T_L1D_CACHEABLE) != 0) 
+-		{
+-			term_dat_out((UNS_8 *) "c");
+-		}
+-		else 
+-		{
+-			term_dat_out((UNS_8 *) " ");
+-		}
+-		term_dat_out((UNS_8 *) " ");
+-
+-		/* Displays used megabytes */
+-		str_makedec(straddr, segs);
+-		term_dat_out(straddr);
+-		term_dat_out_crlf(mbytes_msg);
+-	}
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpinfo
+- *
+- * Purpose: Display MMU info
+- *
+- * Processing:
+- *     Display the MMU information, including enable status, cache
+- *     status, and page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpinfo(void) 
+-{
+-	UNS_32 segsz, last_mmu_reg, mmu_vrt, mmu_reg, mmu_vrtsav = 0, *pt;
+-	UNS_32 mlast_mmu_reg, mmmu_reg;
+-	int idx;
+-	UNS_8 hexaddr [16];
+-
+-	term_dat_out(mmu_msg);
+-	if (cp15_mmu_enabled() == FALSE) 
+-	{
+-		term_dat_out_crlf(disabled_msg);
+-	}
+-	else 
+-	{
+-		term_dat_out_crlf(enabled_msg);
+-
+-	    /* Get MMU control register word */
+-  		mmu_reg = cp15_get_mmu_control_reg();
+-
+-		/* Instruction cache status */
+-		term_dat_out(icache_msg);
+-		if ((mmu_reg & ARM922T_MMU_CONTROL_I) == 0) 
+-		{
+-			term_dat_out_crlf(disabled_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(enabled_msg);
+-		}
+-
+-		/* Data cache status */
+-		term_dat_out(dcache_msg);
+-		if ((mmu_reg & ARM922T_MMU_CONTROL_C) == 0) 
+-		{
+-			term_dat_out_crlf(disabled_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(enabled_msg);
+-		}
+-
+-		term_dat_out(pagetab_msg);
+-		mmu_reg = (UNS_32) cp15_get_ttb();
+-		str_makehex(hexaddr, mmu_reg, 8);
+-		term_dat_out_crlf(hexaddr);
+-		term_dat_out_crlf(slist_msg);
+-
+-		/* Process MMU table - assume that the physical and
+-		   virtual locations of table are the same */
+-		pt = (UNS_32 *) mmu_reg;
+-		mmu_vrt = 0x0;
+-		segsz = 0xFFFFFFFF;
+-		last_mmu_reg = mlast_mmu_reg = 0xFFFFFFFF;
+-		for (idx = 0; idx < 4096; idx++) 
+-		{
+-			mmu_reg = *pt;
+-			mmmu_reg = (mmu_reg & (ARM922T_L1D_TYPE_PG_SN_MASK |
+-				ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE));
+-			segsz = segsz + 1;
+-
+-			if ((last_mmu_reg != 0xFFFFFFFF) &&
+-				(mlast_mmu_reg != mmmu_reg))
+-			{
+-				show_section(last_mmu_reg, mmu_vrtsav, segsz);
+-				segsz = 0;
+-			}
+-
+-			if (mlast_mmu_reg != mmmu_reg) 
+-			{
+-				mmu_vrtsav = mmu_vrt;
+-				last_mmu_reg = mmu_reg;
+-				mlast_mmu_reg = mmmu_reg;
+-			}
+-
+-			pt++;
+-			mmu_vrt += 0x00100000;
+-		}
+-	}
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_dumpmap
+- *
+- * Purpose: Map a virtual address range to a physical range
+- *
+- * Processing:
+- *     From the input addresses and number of sections, generate the
+- *     appropriate entries in the page table.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 mmu_dumpmap(UNS_32 vrt,
+-						   UNS_32 phy,
+-						   UNS_32 sections,
+-						   UNS_32 cache) 
+-{
+-	BOOL_32 processed = FALSE;
+-	UNS_32 mmu_phy, mmu_vrt, tmp1 = 0, tmp2, *pt;
+-	UNS_8 hexaddr [16];
+-
+-	/* Verify address boundaries are sectional */
+-	mmu_vrt = vrt & ~ARM922T_L2D_SN_BASE_MASK;
+-	mmu_phy = phy & ~ARM922T_L2D_SN_BASE_MASK;
+-	if ((mmu_vrt != 0) || (mmu_phy != 0)) 
+-	{
+-		term_dat_out_crlf(map1_err_msg);
+-	}
+-	else 
+-	{
+-		/* Verify that address range and section count will not
+-		   exceed address range of device */
+-		tmp1 = vrt >> 20;
+-		tmp1 = (tmp1 + sections) - 1;
+-		tmp2 = phy >> 20;
+-		tmp2 = (tmp2 + sections) - 1;
+-		if ((tmp1 < 4096) && (tmp2 < 4096)) 
+-		{
+-			/* Good address range and good section count */
+-			processed = TRUE;
+-		}
+-		else 
+-		{
+-			term_dat_out_crlf(map2_err_msg);
+-		}
+-	}
+-	
+-	/* Generate static part of MMU word */
+-	if (cache == 0) 
+-	{
+-		/* Section mapped with cache disabled */
+-		tmp1 = ARM922T_L1D_TYPE_SECTION;
+-	}
+-	else if (cache == 1)
+-	{
+-		/* Section mapped with cache enabled */
+-		tmp1 = (ARM922T_L1D_BUFFERABLE | ARM922T_L1D_CACHEABLE |
+-			ARM922T_L1D_TYPE_SECTION);
+-	}
+-	else if (cache == 2)
+-	{
+-		/* Section unmapped */
+-		tmp1 = ARM922T_L1D_TYPE_FAULT;
+-	}
+-	tmp1 |= ARM922T_L1D_AP_ALL;
+-
+-	/* Offset into page table for virtual address */
+-	tmp2 = (vrt >> 20);
+-	pt = cp15_get_ttb() + tmp2;
+-
+-	/* Loop until all sections are complete */
+-	while ((sections > 0) && (processed == TRUE)) 
+-	{
+-		/* Add in physical address */
+-		tmp2 = tmp1 | (phy & ARM922T_L2D_SN_BASE_MASK);
+-
+-		/* Save new section descriptor for virtual address */
+-		*pt = tmp2;
+-
+-		/* Output message shown the map */
+-		term_dat_out(phya_msg);
+-		str_makehex(hexaddr, phy, 8);
+-		term_dat_out(hexaddr);
+-		if (cache == 2) 
+-		{
+-			term_dat_out(unmapped_msg);
+-		}
+-		else 
+-		{
+-			term_dat_out(mapped_msg);
+-		}
+-		str_makehex(hexaddr, vrt, 8);
+-		term_dat_out(hexaddr);
+-		if (cache == 1) 
+-		{
+-			term_dat_out(cached_msg);
+-		}
+-		term_dat_out_crlf((UNS_8 *) "");
+-
+-		/* Next section and page table entry*/
+-		phy += 0x00100000;
+-		vrt += 0x00100000;
+-		pt++;
+-		sections--;
+-	}
+-
+-	return processed;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuinfo
+- *
+- * Purpose: Display MMU information
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-static BOOL_32 cmd_mmuinfo(void) 
+-{
+-	mmu_dumpinfo();
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_map
+- *
+- * Purpose: Map a physical address region to a virtual region
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_map(void) 
+-{
+-	UNS_32 phy, virt, sects, ce = 0;
+-
+-	/* Get arguments */
+-	virt = cmd_get_field_val(1);
+-	phy = cmd_get_field_val(2);
+-	sects = cmd_get_field_val(3);
+-	ce = cmd_get_field_val(4);
+-
+-	if (ce <= 2) 
+-	{
+-		mmu_dumpmap(virt, phy, sects, ce);
+-	}
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_inval
+- *
+- * Purpose: MMU cache flush and invalidate
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_inval(void) 
+-{
+-	dcache_flush();
+-	icache_inval();
+-	term_dat_out(caches_msg);
+-	term_dat_out(inval_msg);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_dcache
+- *
+- * Purpose: MMU data cache enable and disable
+- *
+- * Processing:
+- *     If the value passed in the parser is 1, enable the data cache,
+- *     otherwise disable the data cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_dcache(void) 
+-{
+-	UNS_32 cenable;
+-	UNS_8 *ppar;
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	switch (cenable)
+-	{
+-		case 0:
+-			dcache_flush();
+-			cp15_set_dcache(0);
+-			ppar = disabled_msg;
+-			break;
+-
+-		case 1:
+-			cp15_invalidate_cache();
+-			cp15_set_dcache(1);
+-			ppar = enabled_msg;
+-			break;
+-
+-		case 2:
+-		default:
+-			dcache_flush();
+-			ppar = flushed_msg;
+-			break;
+-	}
+-
+-	term_dat_out(dcache_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: cmd_icache
+- *
+- * Purpose: MMU instruction cache enable and disable
+- *
+- * Processing:
+- *     If the value passed in the parser is 1, enable the instruction
+- *     cache, otherwise disable the instruction cache.
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_icache(void)
+-{
+-	UNS_32 cenable;
+-	UNS_8 *ppar;
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	if (cenable == 1) 
+-	{
+-		dcache_flush();
+-		cp15_invalidate_cache();
+-		cp15_set_icache(1);
+-		ppar = enabled_msg;
+-	}
+-	else
+-	{
+-		cp15_set_icache(0);
+-		ppar = disabled_msg;
+-	}
+-
+-	term_dat_out(icache_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-
+-/***********************************************************************
+- *
+- * Function: cmd_mmuenab
+- *
+- * Purpose: Enable or disable MMU
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: TRUE if the command was processed, otherwise FALSE
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-BOOL_32 cmd_mmuenab(void) 
+-{
+-	UNS_8 *ppar;
+-	UNS_32 cenable;
+-
+-	term_dat_out_crlf((UNS_8 *) "Warning: Changing MMU status on "
+-		" cached and buffered code can cause system crashes.");
+-
+-	/* Get argument */
+-	cenable = cmd_get_field_val(1);
+-
+-	if (cenable == 1) 
+-	{
+-		if ((cp15_get_mmu_control_reg() & ARM922T_MMU_CONTROL_C) != 0)
+-		{
+-			cp15_invalidate_cache();
+-		}
+-
+-		cp15_set_mmu(1);
+-		ppar = enabled_msg;
+-	}
+-	else
+-	{
+-		cp15_dcache_flush();
+-		cp15_write_buffer_flush();
+-		cp15_invalidate_cache();
+-		cp15_set_mmu(0);
+-		ppar = disabled_msg;
+-	}
+-
+-	term_dat_out(mmu_msg);
+-	term_dat_out_crlf(ppar);
+-
+-	return TRUE;
+-}
+-
+-/***********************************************************************
+- *
+- * Function: mmu_cmd_group_init
+- *
+- * Purpose: Initialize MMU command group
+- *
+- * Processing:
+- *     See function. 
+- *
+- * Parameters: None
+- *
+- * Outputs: None
+- *
+- * Returns: Nothin
+- *
+- * Notes: None
+- *
+- **********************************************************************/
+-void mmu_cmd_group_init(void)
+-{
+-	/* Add MMU group */
+-	cmd_add_group(&mmu_group);
+-
+-	/* Add commands to the MMU group */
+-	cmd_add_new_command(&mmu_group, &core_dcache_cmd);
+-	cmd_add_new_command(&mmu_group, &core_icache_cmd);
+-	cmd_add_new_command(&mmu_group, &core_inval_cmd);
+-	cmd_add_new_command(&mmu_group, &core_mmuenab_cmd);
+-	cmd_add_new_command(&mmu_group, &core_map_cmd);
+-	cmd_add_new_command(&mmu_group, &core_mmuinfo_cmd);
+-}

boot/lpc32xxcdl/lpc32xxcdl-2.11-libnosys_gnu.patch

@@ -0,0 +1,188 @@
+Fix compilation and eabi issues
+
+Since we are not linking with libc anymore, we need to define our own memset,
+strlen and memcpy. Also, as we are using a *libc compiler, we need to "handle"
+exceptions (mostly division by 0) by defining raise() and
+__aeabi_unwind_cpp_pr0.
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c  |   41 +++++++++++++++++++++++
+ csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c |   41 +++++++++++++++++++++++
+ csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c |   41 +++++++++++++++++++++++
+ 3 files changed, 123 insertions(+), 0 deletions(-)
+
+diff --git a/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
+index 385b0ab..f1f0a0a 100644
+--- a/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/ea3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+diff --git a/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
+index 385b0ab..f1f0a0a 100644
+--- a/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/fdi3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+diff --git a/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c b/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
+index cfdb674..6b50c60 100644
+--- a/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
++++ b/csps/lpc32xx/bsps/phy3250/source/libnosys_gnu.c
+@@ -25,6 +25,7 @@
+ #include <errno.h>
+ #include <sys/times.h>
+ #include <sys/stat.h>
++#include <sys/types.h>
+ 
+ /* errno definition */
+ #undef errno
+@@ -125,4 +126,44 @@ int _write(int file, char *ptr, int len){
+     return 0;
+ }
+ 
++void * memset(void * s,int c,size_t count)
++{
++        char *xs = (char *) s;
++
++        while (count--)
++                *xs++ = c;
++
++        return s;
++}
++
++
++size_t strlen(const char * s)
++{
++        const char *sc;
++
++        for (sc = s; *sc != '\0'; ++sc)
++                /* nothing */;
++        return sc - s;
++}
++
++void * memcpy(void * dest,const void *src,size_t count)
++{
++        char *tmp = (char *) dest, *s = (char *) src;
++
++        while (count--)
++                *tmp++ = *s++;
++
++        return dest;
++}
++
++
++/* Dummy functions to avoid linker complaints */
++void __aeabi_unwind_cpp_pr0(void)
++{
++};
++
++void raise(void)
++{
++};
++
+ #endif /*__GNUC__*/
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/lpc32xxcdl-2.11-slashes.patch

@@ -0,0 +1,521 @@
+Use slashes instead of backslashes
+
+Signed-off-by: Alexandre Belloni <abelloni@adeneo-embedded.com>
+---
+ .../bsps/common/examples/buildfiles/makefile       |   10 +++---
+ .../startup/examples/burners/makefile.burner       |   16 +++++-----
+ csps/lpc32xx/bsps/ea3250/source/makefile           |   10 +++---
+ csps/lpc32xx/bsps/fdi3250/source/makefile          |   12 ++++----
+ csps/lpc32xx/bsps/phy3250/examples/makefile        |    2 +-
+ csps/lpc32xx/bsps/phy3250/source/makefile          |    2 +-
+ .../examples/Burners/nor/kickstart/makefile        |    2 +-
+ .../startup/examples/Burners/nor/norerase/makefile |    2 +-
+ .../startup/examples/Burners/nor/s1lapp/makefile   |    2 +-
+ .../examples/Burners/spi/kickstart/makefile        |    2 +-
+ csps/lpc32xx/source/makefile                       |   10 +++---
+ lpc/source/makefile                                |   10 +++---
+ makefile                                           |    2 +-
+ makerule/common/make.rules.environment             |   30 ++++++++++----------
+ makerule/lpc32xx/make.lpc32xx.gnu                  |    2 +-
+ makerule/lpc32xx/make.lpc32xx.iar                  |   12 ++++----
+ makerule/lpc32xx/make.lpc32xx.keil                 |    6 ++--
+ makerule/lpc32xx/make.lpc32xx.rvw                  |    2 +-
+ 18 files changed, 67 insertions(+), 67 deletions(-)
+
+diff --git a/csps/lpc32xx/bsps/common/examples/buildfiles/makefile b/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
+index cf4977c..1da2201 100644
+--- a/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
++++ b/csps/lpc32xx/bsps/common/examples/buildfiles/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -42,6 +42,6 @@ CFLAGS +=-I..\Include
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ 
+diff --git a/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner b/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
+index fca3947..18bd703 100644
+--- a/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
++++ b/csps/lpc32xx/bsps/common/startup/examples/burners/makefile.burner
+@@ -22,9 +22,9 @@
+ #
+ ########################################################################
+ 
+-COMMON_BASE := $(NXPMCU_SOFTWARE)\csps\$(CSP)\bsps\common
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
+-include $(COMMON_BASE)\startup\examples\buildfiles\make.env
++COMMON_BASE := $(NXPMCU_SOFTWARE)/csps/$(CSP)/bsps/common
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
++include $(COMMON_BASE)/startup/examples/buildfiles/make.env
+ 
+ ########################################################################
+ # ARM Realview
+@@ -38,7 +38,7 @@ AFLAGS += --predefine "USE_ALL_STACKS SETL {TRUE}"
+ #AFLAGS += --predefine "RW_RELOC SETL {TRUE}"
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_rvw.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_rvw.ld
+ LDFLAGS = --remove
+ MAP = --map --info=totals,sizes,unused --symbols --list
+ endif
+@@ -55,7 +55,7 @@ AFLAGS += --predefine "USE_ALL_STACKS SETL {TRUE}"
+ #AFLAGS += --predefine "RW_RELOC SETL {TRUE}"
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_rvw.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_rvw.ld
+ LDFLAGS = --remove
+ MAP = --map --info=totals,sizes,unused --symbols --list
+ endif
+@@ -72,7 +72,7 @@ AFLAGS += --defsym USE_ALL_STACKS=1
+ #AFLAGS += --defsym RW_RELOC=1
+ 
+ # This runs from IRAM
+-LDSCRIPT =$(COMMON_BASE)\startup\examples\buildfiles\ldscript_iram_gnu.ld
++LDSCRIPT =$(COMMON_BASE)/startup/examples/buildfiles/ldscript_iram_gnu.ld
+ 
+ endif
+ 
+@@ -108,7 +108,7 @@ endif
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
+ 
+ ########################################################################
+ #
+@@ -157,6 +157,6 @@ endif
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: debug bin
+diff --git a/csps/lpc32xx/bsps/ea3250/source/makefile b/csps/lpc32xx/bsps/ea3250/source/makefile
+index 7cada25..2899b20 100644
+--- a/csps/lpc32xx/bsps/ea3250/source/makefile
++++ b/csps/lpc32xx/bsps/ea3250/source/makefile
+@@ -22,16 +22,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -64,7 +64,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/csps/lpc32xx/bsps/fdi3250/source/makefile b/csps/lpc32xx/bsps/fdi3250/source/makefile
+index 4e153bb..11e4b63 100644
+--- a/csps/lpc32xx/bsps/fdi3250/source/makefile
++++ b/csps/lpc32xx/bsps/fdi3250/source/makefile
+@@ -22,16 +22,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -53,7 +53,7 @@ lib_clean:
+ # delete all targets this Makefile can make and all built libraries
+ # linked in
+ lib_realclean: 
+-	-@$(RM) $(BSP_LIB_DIR)\*.a
++	-@$(RM) $(BSP_LIB_DIR)/*.a
+ 	-@$(RMDIR) $(BSP_LIB_DIR)
+ 	
+ clean: lib_clean
+@@ -65,7 +65,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/examples/makefile b/csps/lpc32xx/bsps/phy3250/examples/makefile
+index b939252..e7feaa6 100644
+--- a/csps/lpc32xx/bsps/phy3250/examples/makefile
++++ b/csps/lpc32xx/bsps/phy3250/examples/makefile
+@@ -25,7 +25,7 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ SUBDIRS = adc dram_self_refresh hstimer hsuart i2c kscan lcd_colorbars
+ SUBDIRS += lcd_tsc mi2c mstimer pwm pwm_simple rtc sdcard sdcard_dma
+diff --git a/csps/lpc32xx/bsps/phy3250/source/makefile b/csps/lpc32xx/bsps/phy3250/source/makefile
+index 7c48e7d..750b776 100644
+--- a/csps/lpc32xx/bsps/phy3250/source/makefile
++++ b/csps/lpc32xx/bsps/phy3250/source/makefile
+@@ -32,7 +32,7 @@ include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
+ AFLAGS +=-I../Include
+ CFLAGS +=-I../Include
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
+index 01e2b38..526d6cc 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/kickstart/makefile
+@@ -78,7 +78,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
+index ce329f5..e81b8db 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/norerase/makefile
+@@ -77,7 +77,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
+index 4426fc7..196faec 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/nor/s1lapp/makefile
+@@ -77,7 +77,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
+index dc73b64..39fc304 100644
+--- a/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
++++ b/csps/lpc32xx/bsps/phy3250/startup/examples/Burners/spi/kickstart/makefile
+@@ -78,7 +78,7 @@ endif
+ 
+ ########################################################################
+ #
+-# Compiler\linker specific stuff
++# Compiler/linker specific stuff
+ #
+ ########################################################################
+ 
+diff --git a/csps/lpc32xx/source/makefile b/csps/lpc32xx/source/makefile
+index 8e05456..16bd944 100644
+--- a/csps/lpc32xx/source/makefile
++++ b/csps/lpc32xx/source/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ 
+ ########################################################################
+@@ -68,7 +68,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/lpc/source/makefile b/lpc/source/makefile
+index 2860db9..ae7d612 100644
+--- a/lpc/source/makefile
++++ b/lpc/source/makefile
+@@ -25,16 +25,16 @@
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+ # Pick up the assembler and C source files in the directory  
+ #
+ ########################################################################
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.ftypes
+-AFLAGS +=-I..\Include
+-CFLAGS +=-I..\Include
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.ftypes
++AFLAGS +=-I../Include
++CFLAGS +=-I../Include
+ 
+ ########################################################################
+ #
+@@ -67,7 +67,7 @@ realclean: lib_realclean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.build
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.build
+ 
+ .PHONY: all lib_clean lib_realclean
+ 
+diff --git a/makefile b/makefile
+index 8645fcc..86fa6bc 100644
+--- a/makefile
++++ b/makefile
+@@ -34,7 +34,7 @@ TARGETS_CLN	=gen_clean csp_clean bsp_clean
+ #
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\$(CSP)\make.$(CSP).$(TOOL)
++include $(NXPMCU_SOFTWARE)/makerule/$(CSP)/make.$(CSP).$(TOOL)
+ 
+ ########################################################################
+ #
+diff --git a/makerule/common/make.rules.environment b/makerule/common/make.rules.environment
+index d5737fe..4e6df48 100644
+--- a/makerule/common/make.rules.environment
++++ b/makerule/common/make.rules.environment
+@@ -52,7 +52,7 @@ ASTYLE          =astyle --options=$(BUILD_ROOT)/tools/astyle.cfg
+ #
+ ########################################################################
+   
+-CSP_LIB_DIR  =$(BUILD_ROOT)\csps\$(CSP)\lib
++CSP_LIB_DIR  =$(BUILD_ROOT)/csps/$(CSP)/lib
+ 
+ ########################################################################
+ #
+@@ -60,7 +60,7 @@ CSP_LIB_DIR  =$(BUILD_ROOT)\csps\$(CSP)\lib
+ #
+ ########################################################################
+ 
+-BSP_LIB_DIR =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)\lib
++BSP_LIB_DIR =$(BUILD_ROOT)/csps/$(CSP)/bsps/$(BSP)/lib
+ 
+ ########################################################################
+ #
+@@ -68,7 +68,7 @@ BSP_LIB_DIR =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)\lib
+ #
+ ########################################################################
+ 
+-GEN_LIB_DIR =$(BUILD_ROOT)\$(GEN)\lib
++GEN_LIB_DIR =$(BUILD_ROOT)/$(GEN)/lib
+ 
+ ########################################################################
+ # 
+@@ -76,9 +76,9 @@ GEN_LIB_DIR =$(BUILD_ROOT)\$(GEN)\lib
+ # 
+ ########################################################################
+ 
+-CSP_DIR     =$(BUILD_ROOT)\csps\$(CSP)
+-CSP_SRC_DIR =$(CSP_DIR)\source
+-CSP_INC_DIR =$(CSP_DIR)\include
++CSP_DIR     =$(BUILD_ROOT)/csps/$(CSP)
++CSP_SRC_DIR =$(CSP_DIR)/source
++CSP_INC_DIR =$(CSP_DIR)/include
+ 
+ ########################################################################
+ # 
+@@ -86,9 +86,9 @@ CSP_INC_DIR =$(CSP_DIR)\include
+ # 
+ ########################################################################
+ 
+-BSP_DIR     =$(BUILD_ROOT)\csps\$(CSP)\bsps\$(BSP)
+-BSP_SRC_DIR =$(BSP_DIR)\source
+-BSP_INC_DIR =$(BSP_DIR)\include
++BSP_DIR     =$(BUILD_ROOT)/csps/$(CSP)/bsps/$(BSP)
++BSP_SRC_DIR =$(BSP_DIR)/source
++BSP_INC_DIR =$(BSP_DIR)/include
+ 
+ ########################################################################
+ # 
+@@ -96,9 +96,9 @@ BSP_INC_DIR =$(BSP_DIR)\include
+ # 
+ ########################################################################
+ 
+-GEN_DIR     =$(BUILD_ROOT)\$(GEN)
+-GEN_SRC_DIR =$(GEN_DIR)\source
+-GEN_INC_DIR =$(GEN_DIR)\include
++GEN_DIR     =$(BUILD_ROOT)/$(GEN)
++GEN_SRC_DIR =$(GEN_DIR)/source
++GEN_INC_DIR =$(GEN_DIR)/include
+ 
+ ########################################################################
+ #
+@@ -151,6 +151,6 @@ endif
+ # 
+ ########################################################################
+ 
+-TARGET_CSP_LIB =$(CSP_LIB_DIR)\$(CSP_ARCHIVE)
+-TARGET_BSP_LIB =$(BSP_LIB_DIR)\$(BSP_ARCHIVE)
+-TARGET_GEN_LIB =$(GEN_LIB_DIR)\$(GEN_ARCHIVE)
++TARGET_CSP_LIB =$(CSP_LIB_DIR)/$(CSP_ARCHIVE)
++TARGET_BSP_LIB =$(BSP_LIB_DIR)/$(BSP_ARCHIVE)
++TARGET_GEN_LIB =$(GEN_LIB_DIR)/$(GEN_ARCHIVE)
+diff --git a/makerule/lpc32xx/make.lpc32xx.gnu b/makerule/lpc32xx/make.lpc32xx.gnu
+index 3277d99..d80b98d 100644
+--- a/makerule/lpc32xx/make.lpc32xx.gnu
++++ b/makerule/lpc32xx/make.lpc32xx.gnu
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CPU      = arm926ej-s
+ CFLAGS   = -mcpu=arm926ej-s -Wall -Os
+diff --git a/makerule/lpc32xx/make.lpc32xx.iar b/makerule/lpc32xx/make.lpc32xx.iar
+index 238ebbf..27d163f 100644
+--- a/makerule/lpc32xx/make.lpc32xx.iar
++++ b/makerule/lpc32xx/make.lpc32xx.iar
+@@ -19,12 +19,12 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+-IARBASE   = $(IAR_ROOT)\ARM
+-IARTOOLS  = $(IARBASE)\bin
+-IAR_LIB   = $(IARBASE)\lib
+-IAR_INC   = $(IARBASE)\inc
++IARBASE   = $(IAR_ROOT)/ARM
++IARTOOLS  = $(IARBASE)/bin
++IAR_LIB   = $(IARBASE)/lib
++IAR_INC   = $(IARBASE)/inc
+ CC        = iccarm
+ CCP       = iccarm
+ AS        = iasmarm
+@@ -36,7 +36,7 @@ CFLAGS    += -I"$(IAR_INC)"
+ AFLAGS    = --cpu 5TEJ
+ LDFLAGS   = 
+ LK        = "$(TARGET_GEN_LIB)" "$(TARGET_CSP_LIB)" "$(TARGET_BSP_LIB)"
+-;LK        += "$(IAR_LIB)\dl4tpannl8f.r79"
++;LK        += "$(IAR_LIB)/dl4tpannl8f.r79"
+ MAP       = --map
+ LDESC     = --config
+ ENTRY     = --entry
+diff --git a/makerule/lpc32xx/make.lpc32xx.keil b/makerule/lpc32xx/make.lpc32xx.keil
+index dd27583..7334d3f 100644
+--- a/makerule/lpc32xx/make.lpc32xx.keil
++++ b/makerule/lpc32xx/make.lpc32xx.keil
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CC        =armcc
+ CCP       =armcc
+@@ -27,11 +27,11 @@ AS        =armasm
+ LD        =armlink
+ AR        =armar -r -s
+ CFLAGS    =--arm -O3 -g --device DARMP3 -D__MICROLIB 
+-CFLAGS    +=-I$(KEIL_RVCT)\inc -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR) 
++CFLAGS    +=-I$(KEIL_RVCT)/inc -I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR) 
+ AFLAGS    =--arm --device=DARMP3 
+ AFLAGS    +=-I$(CSP_INC_DIR) -I$(BSP_INC_DIR) -I$(GEN_INC_DIR)
+ LDFLAGS   =--noremove
+-LK        =--device DARMP3 --libpath $(KEIL_RVCT)\lib --scan $(TARGET_CSP_LIB)
++LK        =--device DARMP3 --libpath $(KEIL_RVCT)/lib --scan $(TARGET_CSP_LIB)
+ LK        +=--scan $(TARGET_BSP_LIB) 
+ LK        +=--scan $(TARGET_GEN_LIB)
+ MAP       =--map --list
+diff --git a/makerule/lpc32xx/make.lpc32xx.rvw b/makerule/lpc32xx/make.lpc32xx.rvw
+index 59961dd..2419976 100644
+--- a/makerule/lpc32xx/make.lpc32xx.rvw
++++ b/makerule/lpc32xx/make.lpc32xx.rvw
+@@ -19,7 +19,7 @@
+ # use without further testing or modification. 
+ ########################################################################
+ 
+-include $(NXPMCU_SOFTWARE)\makerule\common\make.rules.environment
++include $(NXPMCU_SOFTWARE)/makerule/common/make.rules.environment
+ 
+ CC        =armcc
+ CCP       =armcpp
+-- 
+1.7.7.3
+

boot/lpc32xxcdl/lpc32xxcdl.mk

@@ -0,0 +1,70 @@
+#############################################################
+#
+# LPC32XX CDL
+#
+#############################################################
+
+LPC32XXCDL_VERSION = lpc32xx_cdl_v2.11
+LPC32XXCDL_SITE = http://git.lpcware.com/lpc3xxx_cdl.git
+LPC32XXCDL_SITE_METHOD = git
+
+LPC32XXCDL_INSTALL_TARGET = NO
+LPC32XXCDL_INSTALL_IMAGES = YES
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"ea3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"phy3250")
+LPC32XXCDL_KICKSTART = kickstart/kickstart_nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart
+LPC32XXCDL_S1L = s1l/s1l_nand_boot
+LPC32XXCDL_S1L_BURNER = nand/s1lapp
+endif
+
+ifeq ($(BR2_TARGET_LPC32XXCDL_BOARDNAME),"fdi3250")
+LPC32XXCDL_KICKSTART = kickstart/nand
+LPC32XXCDL_KICKSTART_BURNER = nand/kickstart_jtag
+LPC32XXCDL_S1L = s1l
+LPC32XXCDL_S1L_BURNER = nand/s1lapp_jtag
+endif
+
+LPC32XXCDL_BUILD_FLAGS = \
+	CROSS_COMPILE=$(TARGET_CROSS)           \
+	NXPMCU_WINBASE=$(@D)                    \
+	NXPMCU_SOFTWARE=$(@D)                   \
+	BSP=$(BR2_TARGET_LPC32XXCDL_BOARDNAME)  \
+	CSP=lpc32xx TOOL=gnu GEN=lpc
+
+LPC32XXCDL_BOARD_STARTUP_DIR = \
+	csps/lpc32xx/bsps/$(BR2_TARGET_LPC32XXCDL_BOARDNAME)/startup/examples/
+
+# Source files are with dos newlines, which our patch infrastructure doesn't
+# handle. Work around it by converting the affected files to unix newlines
+# before patching
+define LPC32XXCDL_DOS2UNIX_FOR_PATCH
+	sed -n 's|^[+-]\{3\} [^/]\+\([^ \t]*\)\(.*\)|$(@D)\1|p' \
+		boot/lpc32xxcdl/*.patch| sort -u | xargs $(SED) 's/\x0D$$//'
+endef
+
+LPC32XXCDL_POST_EXTRACT_HOOKS += LPC32XXCDL_DOS2UNIX_FOR_PATCH
+
+define LPC32XXCDL_BUILD_CMDS
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)
+	$(MAKE1) $(LPC32XXCDL_BUILD_FLAGS) -C $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)
+endef
+
+define LPC32XXCDL_INSTALL_IMAGES_CMDS
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_KICKSTART_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_KICKSTART)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/Burners/$(LPC32XXCDL_S1L_BURNER)/*gnu.bin $(BINARIES_DIR)
+	cp $(@D)/$(LPC32XXCDL_BOARD_STARTUP_DIR)/$(LPC32XXCDL_S1L)/*gnu.bin $(BINARIES_DIR)
+endef
+
+$(eval $(generic-package))

boot/mxs-bootlets/Config.in

@@ -0,0 +1,90 @@
+config BR2_TARGET_MXS_BOOTLETS
+	bool "mxs-bootlets"
+	depends on BR2_arm
+	help
+	  Stage1 bootloaders for Freescale iMX23/iMX28 SoCs
+
+if BR2_TARGET_MXS_BOOTLETS
+
+choice
+	prompt "Source"
+	default BR2_TARGET_MXS_BOOTLETS_FREESCALE
+	help
+	  Select the location of the bootlets you want to use
+
+config BR2_TARGET_MXS_BOOTLETS_FREESCALE
+	bool "Freescale 10.12.01 version"
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_TARBALL
+	bool "Custom tarball"
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_GIT
+	bool "Custom Git repository"
+
+endchoice
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_TARBALL_URL
+	depends on BR2_TARGET_MXS_BOOTLETS_CUSTOM_TARBALL
+	string "URL of custom bootlets tarball"
+
+if BR2_TARGET_MXS_BOOTLETS_CUSTOM_GIT
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_GIT_URL
+	string "URL of custom Git repository"
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_GIT_VERSION
+	string "Custom Git version"
+
+endif
+
+choice
+	prompt "Bootstream"
+	help
+	  Select which bootstream to generate
+
+config BR2_TARGET_MXS_BOOTLETS_BAREBOX
+       depends on BR2_TARGET_BAREBOX
+       bool "Barebox Bootloader"
+
+config BR2_TARGET_MXS_BOOTLETS_LINUX
+       depends on BR2_LINUX_KERNEL
+       bool "Linux Kernel"
+
+config BR2_TARGET_MXS_BOOTLETS_UBOOT
+       depends on BR2_TARGET_UBOOT
+       bool "U-boot bootloader"
+
+endchoice
+
+config BR2_TARGET_MXS_BOOTLETS_HAS_IVT
+	bool "HAB Support"
+	help
+	  Enable this option if you are building bootlets
+	  for the iMX28 platform that needs to include instructions
+	  for the secure boot mechanism present on these SoCs
+
+choice
+	prompt "Board"
+	help
+	  Select the board to build the bootlets for
+
+config BR2_TARGET_MXS_BOOTLETS_STMP37xx
+	bool "Sigmatel ST-MP3-7xx Board"
+
+config BR2_TARGET_MXS_BOOTLETS_STMP378x
+	bool "Sigmatel ST-MP3-78x Board"
+
+config BR2_TARGET_MXS_BOOTLETS_IMX28EVK
+	bool "Freescale iMX28 EVK Board"
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD
+	bool "Custom board"
+endchoice
+
+config BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD_NAME
+       string "Custom board name"
+       depends on BR2_TARGET_MXS_BOOTLETS_CUSTOM_BOARD
+       help
+         Name of the board to build the bootlets for
+
+endif

boot/mxs-bootlets/barebox_ivt.bd

@@ -0,0 +1,34 @@
+// STMP378x ROM command script to load and run U-Boot
+
+sources {
+	power_prep="./power_prep/power_prep";
+	sdram_prep="./boot_prep/boot_prep";
+	barebox="./barebox";
+}
+
+section (0) {
+
+	//----------------------------------------------------------
+	// Power Supply initialization
+	//----------------------------------------------------------
+
+	load power_prep;
+	load ivt (entry = power_prep:_start) > 0x8000;
+	hab call 0x8000;
+
+	//----------------------------------------------------------
+	// SDRAM initialization
+	//----------------------------------------------------------
+
+	load sdram_prep;
+        load ivt (entry = sdram_prep:_start) > 0x8000;
+        hab call 0x8000;
+	//----------------------------------------------------------
+	//  Load and call u_boot - ELF ARM image
+	//----------------------------------------------------------
+
+        load barebox;
+        load ivt (entry = barebox:start) > 0x8000;
+	hab call 0x8000;
+
+}