Fixes the following security issues:
- named could crash during recursive processing of DNAME records when
deny-answer-aliases was in use. This flaw is disclosed in CVE-2018-5740.
[GL #387]
- When recursion is enabled but the allow-recursion and allow-query-cache
ACLs are not specified, they should be limited to local networks, but they
were inadvertently set to match the default allow-query, thus allowing
remote queries. This flaw is disclosed in CVE-2018-5738. [GL #309]
- Code change #4964, intended to prevent double signatures when deleting an
inactive zone DNSKEY in some situations, introduced a new problem during
zone processing in which some delegation glue RRsets are incorrectly
identified as needing RRSIGs, which are then created for them using the
current active ZSK for the zone. In some, but not all cases, the
newly-signed RRsets are added to the zone's NSEC/NSEC3 chain, but
incompletely -- this can result in a broken chain, affecting validation of
proof of nonexistence for records in the zone. [GL #771]
- named could crash if it managed a DNSSEC security root with managed-keys
and the authoritative zone rolled the key to an algorithm not supported by
BIND 9. This flaw is disclosed in CVE-2018-5745. [GL #780]
- named leaked memory when processing a request with multiple Key Tag EDNS
options present. ISC would like to thank Toshifumi Sakaguchi for bringing
this to our attention. This flaw is disclosed in CVE-2018-5744. [GL
#772]
- Zone transfer controls for writable DLZ zones were not effective as the
allowzonexfr method was not being called for such zones. This flaw is
disclosed in CVE-2019-6465. [GL #790]
For more details, see the release notes:
http://ftp.isc.org/isc/bind9/9.11.5-P4/RELEASE-NOTES-bind-9.11.5-P4.html
Change the upstream URL to HTTPS as the webserver uses HSTS:
>>> bind 9.11.5-P4 Downloading
URL transformed to HTTPS due to an HSTS policy
Update the hash of the license file to account for a change of copyright
year:
-Copyright (C) 1996-2018 Internet Systems Consortium, Inc. ("ISC")
+Copyright (C) 1996-2019 Internet Systems Consortium, Inc. ("ISC")
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 12f644e2c5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With recent dtc but old u-boot, compilation issues occur related to libfdt.
These problems really are u-boot issue since it does not properly set
include paths so that its own headers are included. Nevertheless, since the
u-boot version is typically decided by users and stuck at some version
provided by a SoC or board vendor, it is not feasible to fix those old
versions.
Instead, already several fixes were made in the past, in Buildroot.
See commits:
c7ffd8a75d "package/dtc: fix include guards for older kernel/u-boot"
f437bf547c "uboot: fix build for older uboot source trees"
bf73334232 "uboot: fix build when libfdt-devel is installed system-wide"
0bf80e4bcd "uboot: ensure host includes are searched before system default
includes"
b15a7a62d3 "uboot: revert "uboot: use local libfdt.h""
baae5156ce "uboot: use local fdt headers"
3a6573ccee "uboot: use local libfdt.h"
Commit c7ffd8a75d fixes the problem caused by
dtc having changed their include guards from _FOO_H to FOO_H (leading
underscore removed). Old u-boot would still use _FOO_H, which (combined with
host-dtc headers that use FOO_H) would cause the inclusion of two different
copies of the same nominal include file, e.g. libfdt.h or libfdt_env.h,
causing 'error: redefinition of xxx' compilation issues.
The fix sets the 'new' include guard when the 'old' one is detected,
preventing a second inclusion of the same nominal file.
For some u-boot versions, however, this change not only needs to be made in
libfdt.h and libfdt_env.h, but also in 'fdt.h'.
Update the dtc patch to do just that.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 4c24006b0e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The proftpd configure script doesn't use pkg-config to detect openssl
libraries. Instead, it just adds -lcrypto. Since openssl may be linked
with pthread, it tries to detect that by calling 'openssl version -f',
which gives the arguments with which openssl was compiled.
Since the openssl executable used is either host-openssl or the system
installed openssl, the output of 'openssl version -f' is useless in
Buildroot context. If the target toolchain doesn't have threads support,
it will wrongly pick up -pthread from host-openssl.
Fortunately there is a simple workaround: --without-openssl-cmdline says
that there is no openssl executable and skips the test, so -pthread is
not added. It turns out -pthread is never needed, even in static linking
cases, because openssl/libressl puts the thread support in a separate
object file that only gets linked in if the program actually uses
threads (which proftpd doesn't).
Fixes:
http://autobuild.buildroot.net/results/9c25c3cb3cf93b76c0538c5376a803641bf6575b
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
[Rewrite commit log, after additional analysis and testing]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 51bb23652f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
COPYING contains only the license for GPL-2.0 so use the new license
files that have been added in the Licenses directory since version
2018.03 and
32c1f98eac
Also update GPL-2.0+ to "GPL-2.0+ with OpenSSL exception" and add
Exceptions file, see:
66d0dbe80f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d5f4b3621d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
console-getty.service is not a template unit file (it doesn't have the
@ specifier), so %I doesn't get properly expanded in it. Thus, getty
startup will fail due to invalid options and no getty prompt is launched
on the console.
Fixes:
No getty prompt on boot
Signed-off-by: Francois Gervais <fgervais@distech-controls.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 77c057939d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix the following start warnings:
W: [pulseaudio] main.c: Running in system mode, but --disallow-exit not set.
W: [pulseaudio] main.c: Running in system mode, but --disallow-module-loading not set.
N: [pulseaudio] main.c: Running in system mode, forcibly disabling SHM mode.
N: [pulseaudio] main.c: Running in system mode, forcibly disabling exit idle time.
- fix the following stop error:
E: [pulseaudio] main.c: Failed to kill daemon: No such process
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 597b529927)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add -lz to id3tag.pc, this fix is needed to be able to use pkg-config in
madplay to find id3tag dependencies
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit aa813cd9ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The MPD project dropped autotools support in version 0.21.x in favor of
meson. While adapting the package to the meson build infrastructure, the
recognition of libid3tag failed, as only pkg-config is used to detect
the library. Note, that the version bump of the mpd package to 0.21.x is
not submitted, yet.
To help finding the build system to detect libid3tag with pkg-config
properly, add a .pc file and install it to staging.
This is exactly what Debian and Fedora do as well.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit d6b68e6b6a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
madplay uses a very old configure script.
When the toolchain lacks C++ and the build machine lacks /lib/cpp, this
old configure script fails because it can't find a C++ preprocessor that
is valid:
checking for arm-buildroot-linux-uclibcgnueabi-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking dependency style of no... none
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
This is yet another case that was tentatively fixed by bd39d11d2e
(core/infra: fix build on toolchain without C++), further amended by
4cd1ab1588 (core: alternate solution to disable C++).
However, this only works on libtool scripts that are recent enough, and
thus we need to autoreconf to get it.
We also need to patch configure.ac so that it does not fail on the
missing, GNU-specific files: NEWS, AUTHORS, and Changelog.
Finally, remove also patch on ltmain.sh and MADPLAY_LIBTOOL_PATCH=NO as
autoreconf will create an up to date ltmain.sh
Fixes:
- http://autobuild.buildroot.org/results/fc927de0e9a42095789fb0a631d5facf14076f6e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c05cc5de86)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2019-6975: Memory exhaustion in django.utils.numberformat.format()
If django.utils.numberformat.format() – used by contrib.admin as well as the
the floatformat, filesizeformat, and intcomma templates filters – received a
Decimal with a large number of digits or a large exponent, it could lead to
significant memory usage due to a call to '{:f}'.format().
To avoid this, decimals with more than 200 digits are now formatted using
scientific notation.
https://docs.djangoproject.com/en/2.1/releases/2.1.6/
2.1.6 contained a packaging error, fixed by 2.1.7:
https://docs.djangoproject.com/en/2.1/releases/2.1.7/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 653f86c0e9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For details, see https://github.com/snyk/zip-slip-vulnerability
Older python versions do not validate that the extracted files are inside
the target directory. Detect and error out on evil paths before extracting
.zip / .tar file.
Given the scope of this (zip issue was fixed in python 2.7.4, released
2013-04-06, scanpypi is only used by a developer when adding a new python
package), the security impact is fairly minimal, but it is good to get it
fixed anyway.
Reported-by: Bas van Schaik <security-reports@semmle.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a83e30ad63)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 6e3f7fbc07 ("package/runc: add
upstream security fix for CVE-2019-5736") added a dependency of
docker-containerd to uclibc (inherited from runc), but the depends on
has a typo that makes it ineffective. Due to this, docker-containerd
can still be selected in uClibc configurations, causing runc to be
build, and failing to build due fexecve() being missing in uClibc.
Fixes:
http://autobuild.buildroot.net/results/64ecdb1e007106fdb05979b10b42b90591255504/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 17c7b93379)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The vulnerability allows a malicious container to (with minimal user
interaction) overwrite the host runc binary and thus gain root-level
code execution on the host. The level of user interaction is being able
to run any command (it doesn't matter if the command is not
attacker-controlled) as root within a container in either of these
contexts:
* Creating a new container using an attacker-controlled image.
* Attaching (docker exec) into an existing container which the
attacker had previous write access to.
For more details, see the advisory:
https://www.openwall.com/lists/oss-security/2019/02/11/2
The fix for this issue uses fexecve(3), which isn't available on uClibc, so
add a dependency on !uclibc to runc and propagate to the reverse
dependencies (containerd/docker-engine).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6e3f7fbc07)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, a specific commit hash from the Docker runc.installer was
used to determine the required runc version for the Docker
Engine. This old commit hash used was a untagged pre-1.0.0 release of
runc, closer to an earlier release candidate.
The runc version used in the Debian distribution is not the pinned
version previously used by Buildroot. It is the latest release
candidate. The latest release candidate is known to be compatible with
the Docker Engine, and there is no justification for pinning to an
older RC anymore.
This commit bumps to the latest RC, 1.0.0-rc6. A v1.0.0 is expected
soon.
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 247bb52b9c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2019-1000019: Crash when parsing some 7zip archives.
CVE-2019-1000020: A corrupted or malicious ISO9660 image can cause
read_CE() to loop forever.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0526c9f781)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
v3.2.0 has a bug in the configure step which causes it to fail when being
built against libressl. As libopenssl is selected as the default, the
autobuilders have not uncovered this failure. The issue has been confirmed
in LTS 2018.02.10 (probably broken prior to that as well) and is not
related to the Openssl bump to 1.1.x.
Thread with more details
http://lists.busybox.net/pipermail/buildroot/2019-February/243133.html
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 886f3109a5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2018-20330: Integer overflow causing segfault occurred when
attempting to load a BMP file with more than 1 billion pixels using the
`tjLoadImage()` function.
CVE-2018-19664: Buffer overrun occurred when attempting to decompress a
specially-crafted malformed JPEG image to a 256-color BMP using djpeg.
Cc: Murat Demirten <mdemirten@yh.com.tr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f60925beda)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CVE-2019-6109: Due to missing character encoding in the progress
display, a malicious server (or Man-in-The-Middle attacker) can employ
crafted object names to manipulate the client output, e.g., by using
ANSI control codes to hide additional files being transferred. This
affects refresh_progress_meter() in progressmeter.c.
CVE-2019-6111: Due to the scp implementation being derived from 1983
rcp, the server chooses which files/directories are sent to the client.
However, the scp client only performs cursory validation of the object
name returned (only directory traversal attacks are prevented). A
malicious scp server (or Man-in-The-Middle attacker) can overwrite
arbitrary files in the scp client target directory. If recursive
operation (-r) is performed, the server can manipulate subdirectories as
well (for example, to overwrite the .ssh/authorized_keys file).
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7fe3741bc4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE identifiers: CVE-2019-6212,
CVE-2019-6215, CVE-2019-6216, CVE-2019-6217, CVE-2019-6226,
CVE-2019-6227, CVE-2019-6229, CVE-2019-6233, and CVE-2019-6234.
Additionally, it contains a few minor fixes.
Release notes can be found in the announcement:
https://webkitgtk.org/2019/02/09/webkitgtk2.22.6-released.html
More details on the issues covered by securit fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2019-0001.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 971afefaab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bugfix release, fixing a number of issues discovered post-1.5.6.
Drop patches as they are now included upstream.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 640153775b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2018-12551: If Mosquitto is configured to use a password file for
authentication, any malformed data in the password file will be treated as
valid. This typically means that the malformed data becomes a username and
no password. If this occurs, clients can circumvent authentication and get
access to the broker by using the malformed username. In particular, a
blank line will be treated as a valid empty username. Other security
measures are unaffected. Users who have only used the mosquitto_passwd
utility to create and modify their password files are unaffected by this
vulnerability. Affects version 1.0 to 1.5.5 inclusive.
CVE-2018-12550: If an ACL file is empty, or has only blank lines or
comments, then mosquitto treats the ACL file as not being defined, which
means that no topic access is denied. Although denying access to all topics
is not a useful configuration, this behaviour is unexpected and could lead
to access being incorrectly granted in some circumstances. Affects versions
1.0 to 1.5.5 inclusive.
CVE-2018-12546: If a client publishes a retained message to a topic that
they have access to, and then their access to that topic is revoked, the
retained message will still be delivered to future subscribers. This
behaviour may be undesirable in some applications, so a configuration option
check_retain_source has been introduced to enforce checking of the retained
message source on publish.
Add two upstream post-1.5.6 patches to fix a build error in the bridge code
when ADNS is enabled and when building with older toolchains not defaulting
to C99 mode.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e478977071)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 7fb6e78254 (core/instrumentation: shave minutes off the
build time), the built stampfile is used as a reference to detect files
installed by a package.
However, packages may install files keeping their mtime intact, and we
end up not detecting this. For example, the internal skeleton package
will install (e.g.) /etc/passwd with an mtime of when the file was
created in $(TOP_DIR), which could be the time the git repository was
checked out; that mtime is always older than the build stamp file, so
files installed by the skeleton package are never accounted for to that
package, or to any other package for that matters.
We switch to an alternate solution, which consists of storing some extra
metadata per file, so that we can more reasily detect modifications to
the files. Then we compare the state before the package is installed (by
reusing the existing list) and after the package is installed, compare
that to list any new file or modified files (in reality, ignoring
untouched and removed files). Finally, we store the file->package
association in the global list and store the new stat list as the global
list.
The format used for the .stat file is:
mtime:inode:perms:filetype:size,filename
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Trent Piepho <tpiepho@impinj.com>
[Peter: rename files, reformat, only look for files and symlinks and pass
LC_ALL=C to comm as pointed out by Thomas De Schampheleire]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3c8f0d9efa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Whether using the new sysusers.d snippet, or adding an entry to
/etc/password, set the service's home directory to /var/empty.
See README.privsep included as part of the openssh distribution.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9acbf811cd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current transform changes any '.' at the start of a filename to
$(BR2_SDK_PREFIX). This also applies to the target of a symlink, when
it is relative.
We thus might end up with something like:
$(BR2_SDK_PREFIX)/bin/aarch64-linux-gnu-ar ->
$(BR2_SDK_PREFIX)./opt/ext-toolchain/bin/aarch64-linux-gnu-ar
when it should be:
$(BR2_SDK_PREFIX)/bin/aarch64-linux-gnu-ar ->
../opt/ext-toolchain/bin/aarch64-linux-gnu-ar
We fix that by making sure we always remove a known prefix, i.e. we
remove the path to host dir. The obvious solution would be to cd into
$(HOST_DIR)/.. , then tar ./host/ and finally use a --transfrom pattern
as 's,^\./$(notdir $(HOST_DIR)),$(BR2_SDK_PREFIX)'.
Since $(HOST_DIR) can point to a user-supplied location, we don't know
very well how the pattern may patch.
Instead, we cd into / and tar the full path to $(HOST_DIR).
Since tar removes any leading '/', it would spurr a warning message,
which is annoying. So we explicitly remove the leading '/' from
$(HOST_DIR) when we tar it.
Finally, we transform all filenames to replace a leading $(HOST_DIR)
(without a leading /) to the prefix to use.
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[yann.morin.1998@free.fr:
- use a single transform pattern
- use full HOST_DIR path as pattern to replace
- update commit log accordingly
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8fed162987)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a runtime bug on compilers where unsigned char is the default.
Fixes a runtime bug where _state variable in the encoder and decoder
c++ objects where not initialized by the constructors.
Signed-off-by: Mikael Eliasson <mikael@robomagi.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3d76bde1a9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When NetworkManager and dhcpcd packages are both enabled, dhcpcd
services and NetworkManager both spawn dhcpcd. This causes the network
port to retrieve an IP address and later lose it a few seconds after
startup.
This patch prevents dhcpcd services from launching dhcpcd if
NetworkManager is enabled.
Signed-off-by: Jim Brennan <jbrennan@impinj.com>
[Thomas: add a comment in the code to explain the seemingly strange
condition.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4b530daf42)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without support for vconsole, systemd will abruptly kill anything
spawned on the console, thus preventing users from loging in from
the console, effectively locking them out if the target does not
have another mean of logging in (no sshd, no serial line...)
We fix that by making support for vconsole default to y, since
logging in from the console if more frequent than not. Users can
still de-activate it when they know they don't need it.
Note that logging from a serial line is not impacted, and still
works whether vconsole is enabled or not.
Signed-off-by: David Fogle <david.j.fogle@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fc0787e76e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
During activation, pg_ctl uses exec to start the db server, which causes
the service to never finish activating when Type=forking. Upstream
recommends configuring --with-systemd and using Type=notify.
https://www.postgresql.org/docs/10/static/server-start.html
Upstream says:
When using systemd, you can use the following service unit file
[...]
Using Type=notify requires that the server binary was built with
configure --with-systemd.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit eada187e77)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The scp download helper is broken when the server URL starts with 'scp://'.
Such prefix is used in two situations:
1. to let FOO_SITE point to an scp location without explicitly having to set
'FOO_SITE_METHOD = scp'
2. when BR2_PRIMARY_SITE or BR2_BACKUP_SITE points to an scp location. In
this case, there is no equivalent of 'SITE_METHOD'.
Strip out the scheme prefix, similarly to how the 'file' download helper
does it. That helper has the same cases as above.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit aa62b36456)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* CVE-2019-3814: If imap/pop3/managesieve/submission client has
trusted certificate with missing username field
(ssl_cert_username_field), under some configurations Dovecot
mistakenly trusts the username provided via authentication instead
of failing.
* ssl_cert_username_field setting was ignored with external SMTP AUTH,
because none of the MTAs (Postfix, Exim) currently send the
cert_username field. This may have allowed users with trusted
certificate to specify any username in the authentication. This bug
didn't affect Dovecot's Submission service.
For more details, see the announcement:
https://www.dovecot.org/list/dovecot-news/2019-February/000394.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a30d577a4b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch bumps the Linux CIP version to v4.4.171-cip30 and updates the
download url to the new official one.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fb26b85b90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some package builds may fail when environment variables are present with the
same names as make variables in a package. This is a bigger problem for
environment variables with generic names, like 'PLATFORM' and 'OS'.
'PLATFORM' is for example a problem for host-acl.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d3e535a839)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
setlocalversion will use 'hg id' to determine whether or not the current
revision is tagged. If there is no tag, the Mercurial revision is printed,
otherwise nothing is printed.
The problem is that the user may have custom configuration settings (in
their ~/.hgrc file or similar) that changes the output of 'hg id' in a way
that the script does not expect. In such cases, the Mercurial revision may
not be printed or printed incorrectly.
It is good practice to ignore the user environment when calling Mercurial
commands from a well-defined script, by setting the environment variable
HGRCPATH to the empty string. See also 'hg help environment'.
In the particular case of Nokia, a custom extension adds dynamic tags in the
repository, i.e. tags that are stored in a file external to the repository
and only visible when the extension is active. These tags should not
influence the behavior of setlocalversion as they are not official Buildroot
tags, i.e. even if a revision is tagged, the Mercurial revision should still
be printed.
Note that this still does not solve the problem where an organization adds
_real_ tags in their Buildroot repository. For example, there might be a
moving tag 'last-validated' or tags indicating in which product release that
Buildroot revision was used. In these cases, setlocalversion will still not
behave as expected, i.e. show the Mercurial revision.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 44084aa981)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When Buildroot is stored in a Mercurial repository on a branch other than
'default' ('master' in git terms), setlocalversion (used to populate
/etc/os-release) will incorrectly think that this is a tagged version and
will NOT print out the revision hash.
This is due to the fact that the output of 'hg id' is assumed to be
"<revision> <tags-if-any>"
but when on a branch it actually is:
"<revision> (<branch>) <tags-if-any>"
To let setlocalversion receive the output it expects, explicitly ask 'hg id'
to retrieve only the revision hash and any tags, ommitting any branch
information.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 57e6dcf5fb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Do not check for C++ compiler as libgeotiff is written in C otherwise
build will fail on toolchains without a working C++ compiler:
checking how to run the C++ preprocessor... /lib/cpp
configure: error: in
`/data/buildroot/buildroot-test/instance-1/output/build/libgeotiff-1.4.2':
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
Fixes:
- http://autobuild.buildroot.org/results/72f1c5c1b8fc337a1cff4b280abe99afd65f945b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2693362a04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The openssh privilege separation feature, enabled by default,
requires that the path /var/empty exists and has certain permissions
(not writable by the sshd user). Note that nothing ever gets writting
in this directory, so it works fine on a readonly rootfs.
See README.privsep included as part of the openssh distribution.
Signed-off-by: Chris Lesiak <chris.lesiak@licor.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f85665c585)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit de336584d2 (package/docker-engine: split docker-{cli, engine},
bump to v18.09.0), the docker-engine package only builds the daemon part,
and the .mk file no longer use the _DAEMON option, so drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1c47edee82)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise docker-compose fails at runtime with:
docker-compose
Traceback (most recent call last):
File "/usr/bin/docker-compose", line 6, in <module>
from pkg_resources import load_entry_point
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3123, in <module>
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3107, in _call_aside
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3136, in _initialize_master_working_set
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 580, in _build_master
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 593, in _build_from_requirements
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 781, in resolve
pkg_resources.DistributionNotFound: The 'PyYAML<4,>=3.10' distribution was not found and is required by docker-compose
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3019b97648)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
tpm2-tools is commonly used with the resource manager, tpm2-abrmd - But it
CAN be used without, E.G. by setting the TPM2TOOLS_TCTI_NAME environment
variable to communicate directly with the kernel driver:
export TPM2TOOLS_TCTI_NAME=device
Either directly with the TPM device (/dev/tpmN) or through the in-kernel
resource manager provided by Linux kernel since 4.12 (/dev/tpmrmN)
For some use cases (E.G. initramfs) it makes sense to use tpm2-tools
without abrmd, so remove the tpm2-abrmd select, and instead a note in the
help text that it may be needed.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7b8feba51d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qemu_aarch64_virt_defconfig (implicitly) specifies cortex-a53, so adjust the
QEMU command line to also emulate a a53 instead of a57.
Also adjust the defconfig to explicitly specify a53 for consistency/clarity.
Signed-off-by: Gerome Burlats <gerome.burlats@smile.fr>
Cc: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0203df36ac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Overriding variables in packages recipes is an error-prone practice.
Current behavior of installing either only as a script or only as a
binary is intended, as describe in the commit log of "d3e4db4e34
usb_modeswitch: bump to version 1.2.6" from 2013.
Rewrite the code to keep the same behavior while replacing variable
override [1] by conditional assignments [2].
[1]
VAR = ...
if ...
VAR = ...
[2]
if ...
VAR = ...
else
VAR = ...
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e25040d31a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit "a554109af8 package/usb_modeswitch: disable parallel build" added
a unicode space in a comment. Replace it with a normal ASCII space for
consistency with elsewhere.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8be8c72c2b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit d1f545004b from 2014
because the added variables already existed. The real problem at the
time was that one of the pre-existent variables had a typo, fixed in a
later commit.
Currently AVRDUDE_LICENSE and AVRDUDE_LICENSE_FILES are declared twice
with the same values for each one. So remove one of them.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d6bce837ec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since "57ace26b6c package/sdl_sound: add optional support for
libmodplug" from 2016, optional CONF_OPTS are added but they do not
really take effect because there is an unconditional override below the
conditional append.
Currently this does not cause build failures, but it can lead to wrong
detection of dependencies because many explicit --enable/--disable are
not passed to configure.
Fix this by moving the unconditional code to the top.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit df0d7d1371)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit "c5b85231fb s6-networking: enable SSL if libressl is selected"
actually dropped the dependency on s6-dns and s6 when libressl is
enabled.
Fix this by using += inside the conditional code.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 30ff614a03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add backported patches for the following four security issues in libarchive.
There is no new release yet including these patches.
- CVE-2018-1000877 (https://nvd.nist.gov/vuln/detail/CVE-2018-1000877)
"libarchive version commit 416694915449219d505531b1096384f3237dd6cc onwards
(release v3.1.0 onwards) contains a CWE-415: Double Free vulnerability in
RAR decoder - libarchive/archive_read_support_format_rar.c, parse_codes(),
realloc(rar->lzss.window, new_size) with new_size = 0 that can result in
Crash/DoS. This attack appear to be exploitable via the victim must open a
specially crafted RAR archive."
- CVE-2018-1000878 (https://nvd.nist.gov/vuln/detail/CVE-2018-1000878)
"libarchive version commit 416694915449219d505531b1096384f3237dd6cc onwards
(release v3.1.0 onwards) contains a CWE-416: Use After Free vulnerability in
RAR decoder - libarchive/archive_read_support_format_rar.c that can result
in Crash/DoS - it is unknown if RCE is possible. This attack appear to be
exploitable via the victim must open a specially crafted RAR archive."
- CVE-2018-1000879 (https://nvd.nist.gov/vuln/detail/CVE-2018-1000879)
"libarchive version commit 379867ecb330b3a952fb7bfa7bffb7bbd5547205 onwards
(release v3.3.0 onwards) contains a CWE-476: NULL Pointer Dereference
vulnerability in ACL parser - libarchive/archive_acl.c,
archive_acl_from_text_l() that can result in Crash/DoS. This attack appear
to be exploitable via the victim must open a specially crafted archive
file."
- CVE-2018-1000880 (https://nvd.nist.gov/vuln/detail/CVE-2018-1000880)
"libarchive version commit 9693801580c0cf7c70e862d305270a16b52826a7 onwards
(release v3.2.0 onwards) contains a CWE-20: Improper Input Validation
vulnerability in WARC parser -
libarchive/archive_read_support_format_warc.c, _warc_read() that can result
in DoS - quasi-infinite run time and disk usage from tiny file. This attack
appear to be exploitable via the victim must open a specially crafted WARC
file."
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 17ba24bac1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2018-14629 dns: Fix CNAME loop prevention using counter regression
- CVE-2018-16853: Fix S4U2Self crash with MIT KDC build
- CVE-2018-16853: Do not segfault if client is not set
For more info, see the release notes:
https://www.samba.org/samba/history/samba-4.9.4.html
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
[Peter: mention security impact, add CVE info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3cf46525b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The websock_config.h file currently ends up being installed into the
sysroot with a #include "config.h" line but the config.h file does not
get copied into the sysroot. Refactoring the original patch to have the
configure script properly report whether or not SSL support is enabled
without using the config.h file.
Patch has been submitted upstream but may never be merged since upstream
appears to be dead.
https://github.com/payden/libwebsock/pull/38
Signed-off-by: Clayton Shotwell <clayton.shotwell@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit f6843a75fe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
*) SECURITY: CVE-2018-17199 (cve.mitre.org)
mod_session: mod_session_cookie does not respect expiry time allowing
sessions to be reused. [Hank Ibell]
*) SECURITY: CVE-2018-17189 (cve.mitre.org)
mod_http2: fixes a DoS attack vector. By sending slow request bodies
to resources not consuming them, httpd cleanup code occupies a server
thread unnecessarily. This was changed to an immediate stream reset
which discards all stream state and incoming data. [Stefan Eissing]
*) SECURITY: CVE-2019-0190 (cve.mitre.org)
mod_ssl: Fix infinite loop triggered by a client-initiated
renegotiation in TLSv1.2 (or earlier) with OpenSSL 1.1.1 and
later. PR 63052. [Joe Orton]
For more details, see the CHANGES file:
https://www.apache.org/dist/httpd/CHANGES_2.4.38
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7675863549)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2018-19935: Allows remote attackers to cause a denial of service (NULL
pointer dereference and application crash) via an empty string in the
message argument to the imap_mail function.
https://www.cvedetails.com/cve/CVE-2018-19935/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpango in Pango 1.40.8 through 1.42.3, as used in hexchat and other
products, allows remote attackers to cause a denial of service (application
crash) or possibly have unspecified other impact via crafted text with
invalid Unicode sequences.
https://nvd.nist.gov/vuln/detail/CVE-2018-15120
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1574dd6d48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
CVE-2017-14634: In libsndfile 1.0.28, a divide-by-zero error exists in the
function double64_init() in double64.c, which may lead to DoS when playing a
crafted audio file
CVE-2017-17456: The function d2alaw_array() in alaw.c of libsndfile
1.0.29pre1 may lead to a remote DoS attack (SEGV on unknown address
0x000000000000), a different vulnerability than CVE-2017-14245
CVE-2017-17457: The function d2ulaw_array() in ulaw.c of libsndfile
1.0.29pre1 may lead to a remote DoS attack (SEGV on unknown address
0x000000000000), a different vulnerability than CVE-2017-14246
CVE-2018-13139: A stack-based buffer overflow in psf_memset in common.c in
libsndfile 1.0.28 allows remote attackers to cause a denial of service
(application crash) or possibly have unspecified other impact via a crafted
audio file. The vulnerability can be triggered by the executable
sndfile-deinterleave
CVE-2018-19661: An issue was discovered in libsndfile 1.0.28. There is a
buffer over-read in the function i2ulaw_array in ulaw.c that will lead to a
denial of service
CVE-2018-19662: An issue was discovered in libsndfile 1.0.28. There is a
buffer over-read in the function i2alaw_array in alaw.c that will lead to a
denial of service
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 45014da2b7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libmad uses a very old configure script.
When the toolchain lacks C++ and the build machine lacks /lib/cpp, this
old configure script fails because it can't find a C++ preprocessor that
is valid:
checking for arm-buildroot-linux-uclibcgnueabi-g++... no
checking whether we are using the GNU C++ compiler... no
checking whether no accepts -g... no
checking dependency style of no... none
checking how to run the C++ preprocessor... /lib/cpp
configure: error: C++ preprocessor "/lib/cpp" fails sanity check
See `config.log' for more details.
This is yet another case that was tentatively fixed by bd39d11d2e
(core/infra: fix build on toolchain without C++), further amended by
4cd1ab1588 (core: alternate solution to disable C++).
However, this only works on libtool scripts that are recent enough, and
thus we need to autoreconf to get it.
We also need to patch configure.ac so that it does not fail on the
missing, GNU-specific files: NEWS, AUTHORS, and Changelog.
Fixes:
- http://autobuild.buildroot.org/results/6a6aa29295bd70679c3a22a149e79010fa20c1bf
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit eae18d01ab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When linking the host cargo binary, the linker should be told to find
libraries in $(HOST_DIR)/lib, otherwise it will not work libraries
such as libhttp_parser. This was found with per-package directory
support, where the build failed with:
= note: /usr/bin/ld: cannot find -lhttp_parser
collect2: error: ld returned 1 exit status
In order to fix this, instead of passing -L$(HOST_DIR)/lib during the
build of Cargo, we make sure all flags in $(HOST_LDFLAGS) are passed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b5e1b51dd1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- epoll supported since linux-2.5.44/glibc-2.3.2 (see [1])
- dup3 supported since linux-2.6.27/glibc-2.9 (see [2])
- SOCK_CLOEXEC supported on linux (see [3])
- accept4 suppported since linux-2.6.28/glibc-2.10 (see [4])
Fixes [5] apache runtime failure (#11576)
[mpm_event:crit] [pid 173:tid 1996214272] (70023)This function has not been
implemented on this platform: AH00495: Couldn't create a Thread Safe Pollset.
Is it supported on your platform?Also check system or user limits!
[:emerg] [pid 173:tid 1996214272] AH00017: Pre-configuration failed, exiting
[1] http://man7.org/linux/man-pages/man7/epoll.7.html
[2] https://linux.die.net/man/2/dup3
[4] https://linux.die.net/man/2/accept4
[5] https://bugs.busybox.net/show_bug.cgi?id=11576
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7a3b44f445)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While building llvm for the target (x86_64), the build failed due to
path poisoning (-I/usr/include/libxml2) while building NATIVE tools
(i.e for the host). The llvm package tries to build a tool for the host
with the cross-compiler which doesn't work when the paranoid toolchain
wrapper (BR2_COMPILER_PARANOID_UNSAFE_PATH) is enabled.
We know that llvm (target) needs llvm-tablegen and llvm-config built by
host-llvm, but only LLVM_TABLEGEN is provided by llvm.mk. Adding
LLVM_CONFIG_PATH=$(HOST_DIR)/bin/llvm-config for llvm (target)
fixes the path poisoining issue since llvm doesn't build the NATIVE
variant.
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Cc: Valentin Korenblit <valentinkorenblit@gmail.com>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Tested-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d3245ce425)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
linux is a bit different than other kconfig-package, because it has
"toolchain" in KCONFIG_DEPENDENCIES. Thanks to this, host-ccache *is*
ready by the time kconfig invocations are made, so we could use
$(HOSTCC) as the host compiler for kconfig related operations.
However, for consistency with other kconfig-package packages, we chose
to use $(HOSTCC_NOCCACHE) as well.
We cannot rely on the default value of HOSTCC passed by the
kconfig-package infrastructure, because $(LINUX_MAKE_FLAGS) also
contains a HOSTCC definition that would override the one passed by the
kconfig-package infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 71a31b2357)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
At kconfig time, dependencies are not built, and therefore host-ccache
is not ready. Due to this, using $(HOSTCC) as the host compiler in
KCONFIG_OPTS does not work: a "make uboot-menuconfig" invocation from
a clean tree with ccache enabled fails.
This commit fixes this by using $(HOSTCC_NOCCACHE). We cannot rely on
the default value of HOSTCC passed by the kconfig-package
infrastructure, because $(UBOOT_MAKE_OPTS) also contains a HOSTCC
definition that would override the one passed by the kconfig-package
infrastructure.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9d684a0967)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The kconfig build logic uses the HOSTCC variable to find the host
compiler. It makes sense to explicitly pass a value to this variable,
pointing to the host compiler used by Buildroot.
During the kconfig step, host-ccache is not ready (host-ccache is only
a dependency to the configure step of packages), so we use
$(HOSTCC_NOCCACHE).
Packages currently using the kconfig-package fell into two categories:
- Those not passing any HOSTCC value. For such packages, it was the
default host compiler detected by the kconfig build logic that was
used. ccache was therefore never used. With this commit, those
packages will now be using the host compiler detected by
Buildroot. Packages in this situation: at91bootstrap3, barebox,
busybox, swupdate, uclibc, xvisor.
- Those passing a HOSTCC value. Such packages were passing $(HOSTCC),
which doesn't work as host-ccache will not be ready. This commit
does not fix them, as they still override HOSTCC. It will be fixed
in followup commits. Packages in this situation: uboot and
linux. Note that linux was a bit special, because it has a
KCONFIG_DEPENDENCIES on the toolchain package, so in fact
host-ccache was ready.
So practically speaking, this commit does not fix anything, as the two
only problematic packages that use $(HOSTCC) are not fixed. However,
it makes things more correct by explicitly telling kconfig which
compiler to use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 28aa05dd95)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This script currently uses "/usr/bin/env python" as shebang but it does
not really support Python3. Instead of limiting the script to Python2,
fix it to support both versions.
So change all imports to absolute imports because Python3 follows PEP328
and dropped implicit relative imports.
In order to avoid errors when decoding files with the default 'utf-8'
codec, use errors="surrogateescape" when opening files, the docs for
open() states: "This is useful for processing files in an unknown
encoding.". This argument is not compatible with Python2 open() so
import 'six' to use it only when running in Python3.
As a consequence the file handler becomes explicit, so use it to close()
the file after it got processed.
This "surrogateescape" is a simple alternative to the complete solution
of opening files with "rb" and changing all functions in the lib*.py
files to use bytes objects instead of strings. The only case we can have
non-ascii/non-utf-8 files being checked by the script are for patch
files when the upstream file to be patched is not ascii or utf-8. There
is currently one case in the tree:
package/urg/0002-urg-gcc6-fix-narrowing-conversion.patch.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Tested-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 02b165dc71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e04ae696d4 (tpm2-abrmd: fix build with BR2_FORTIFY_SOURCE_1) missed
a backslash in TPM2_ABRMD_CONF_ENV, fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
This release of wolfSSL includes a fix for 1 security vulnerability.
Medium level fix for potential cache attack with a variant of
Bleichenbacher’s attack. Earlier versions of wolfSSL leaked PKCS #1 v1.5
padding information during private key decryption that could lead to a
potential padding oracle attack. It is recommended that users update to the
latest version of wolfSSL if they have RSA cipher suites enabled and have
the potential for malicious software to be ran on the same system that is
performing RSA operations. Users that have only ECC cipher suites enabled
and are not performing RSA PKCS #1 v1.5 Decryption operations are not
vulnerable. Also users with TLS 1.3 only connections are not vulnerable to
this attack. Thanks to Eyal Ronen (Weizmann Institute), Robert Gillham
(University of Adelaide), Daniel Genkin (University of Michigan), Adi Shamir
(Weizmann Institute), David Wong (NCC Group), and Yuval Yarom (University of
Adelaide and Data61) for the report.
The paper for further reading on the attack details can be found at
http://cat.eyalro.net/cat.pdf
Drop now upstreamed patch.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4e1b3c6e9f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The start-stop-daemon invocation to start abrmd was missing the -m (make
pidfile) option, causing stop to fail.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 03be1db663)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script passes -U FORTIFY_SOURCE -D FORTIFY_SOURCE=2 by
default, which conflicts with BR2_FORTIFY_SOURCE_1 as -Werror is used:
<cross>-gcc .. -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 .. -D_FORTIFY_SOURCE=1
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
Disable this so the FORTIFY_SOURCE flags in TARGET_CFLAGS (if any) is used
instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8286be2891)
[Peter: adjust variable names for abrmd-1.3.0]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stack protection is now controlled Buildroot wide with the BR2_SSP_*
options, so disable the explicit -fstack-protector-all so the SSP logic in
the toolchain wrapper is used instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit db828b9192)
[Peter: adjust variable names for abrmd-1.3.0]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building with --enable-hardening (the default), forces -fstack-protector-all
/ FORTIFY_SOURCE=2. These options are now controlled Buildroot wide with
the BR2_SSP_* / BR2_FORTIFY_SOURCE_* options. Disable hardening so the
ssp/fortify settings in the toolchain wrapper / CFLAGS is used instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 2bf187c2b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script passes -U FORTIFY_SOURCE -D FORTIFY_SOURCE=2 by
default, which conflicts with BR2_FORTIFY_SOURCE_1 as -Werror is used:
<cross>-gcc .. -U_FORTIFY_SOURCE -D_FORTIFY_SOURCE=2 .. -D_FORTIFY_SOURCE=1
<command-line>:0:0: error: "_FORTIFY_SOURCE" redefined [-Werror]
Disable this so the FORTIFY_SOURCE flags in TARGET_CFLAGS (if any) is used
instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 223c4fb704)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Stack protection is now controlled buildroot wide with the BR2_SSP_*
options, so disable the explicit -fstack-protector-all so the SSP logic in
the toolchain wrapper is used instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d38bcb9de5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In addition:
- Remove unused option -Dkill-path.
(See commit 9a85778412fa3e3f8d4561064131ba69f3259b28)
- Change option -Dmyhostname to -Dnss-myhostname.
- Remove patches from upstream.
- Update hash of README file. The changes are unrelated to licensing.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
Tested-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[Thomas: update the hash of the README file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0b213d5a38)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build fails because $(TARGET_DIR)/bin folder may not exist if for
example to use the following defconfig:
BR2_x86_64=y
BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_4_16=y
BR2_SYSTEM_BIN_SH_DASH=y
BR2_TARGET_GENERIC_GETTY_PORT="tty1"
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="4.16.7"
BR2_LINUX_KERNEL_USE_CUSTOM_CONFIG=y
BR2_LINUX_KERNEL_CUSTOM_CONFIG_FILE="board/qemu/x86_64/linux.config"
BR2_PACKAGE_BUSYBOX_SHOW_OTHERS=y
BR2_PACKAGE_S6_LINUX_INIT=y
BR2_TARGET_ROOTFS_EXT2=y
Signed-off-by: Vadim Kochan <vadim4j@gmail.com>
[Peter: use install -D]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 89fdf21d58)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The syscfg header name is now based on the target triplet, with the
vendor part set to "unknown". The symlink approach no longer works since
we use "buildroot" for the vendor part. Override the target host
configure parameter to match the build system expectation.
The x86 header vendor part has been renamed to "unknown" as well.
Account for that in BR2_PACKAGE_LIBGPG_ERROR_SYSCFG.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e58b5b1b93)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building python-numpy on ARC with glibc fails due to missing FE_*
definitions in <fenv.h>. These exceptions are not supported by
ARC architecture. Let's add patch, which disables compilation
of a part of the code in which FE_* errors occur for ARC.
ARCompact toolchain issues are already fixed in the latest toolchain.
Also since commit "311af5e8c2db887800639bc803c8201b6b70e9ce"
("toolchain/toolchain-buildroot: enable glibc for all little-endian
ARCs with atomic ops") glibc is available for ARCompact.
That is why in Config.in we are leaving only "BR_arc" and
removing comments, which are not actual.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b1056f16f4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cc-tool depends on signals2 not signals, indeed only signals2 is used
in src/data/progress_watcher.h and BOOST_SIGNALS defined in
m4/boost.m4 is never used in configure.ac.
There is no need to select any sort of BR2_PACKAGE_BOOST_SIGNALS2
option, as signals2 is a header-only boost library, and such
header-only boost libraries do not have any Config.in options, as they
are all always installed with the base boost library.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: tweak commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 024ed470ad)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In 36568732e4, we expanded toolchain.cmake to also define the value for
CMAKE_SYSTEM_VERSION, as the cmake documentation states that it must be
manually defined when doing cross-compilation [0]:
When the CMAKE_SYSTEM_NAME variable is set explicitly to enable
cross compiling then the value of CMAKE_SYSTEM_VERSION must also
be set explicitly to specify the target system version.
However, the fix in 36568732e4 uses the version of the kernel headers,
assuming that would be the oldest kernel we could run on. Yet, this is
not the case, because glibc (for example) has fallbacks to support
running on kernels older than the headers it was built against.
The cmake official wiki [1] additionally states:
* CMAKE_SYSTEM_VERSION : optional, version of your target system, not
used very much.
Folllowed a little bit below, by:
* CMAKE_TOOLCHAIN_FILE : absolute or relative path to a cmake script
which sets up all the toolchain related variables mentioned above
For instance for crosscompiling from Linux to Embedded Linux on PowerPC
this file could look like this:
# this one is important
SET(CMAKE_SYSTEM_NAME Linux)
#this one not so much
SET(CMAKE_SYSTEM_VERSION 1)
[...]
Furthermore, using the kernel headers version can be a bit misleading (as
it really looks like is is the correct version to use when it is not),
while it is obvious that 1 is not really the output of `uname -r` and
thus is definitely not misleading.
Finally, random searches [2] about CMAKE_SYSTEM_VERSION, mostly only
turns up issues related with Windows, Mac-OS, and to a lesser extent,
Android (where it is forcibly set to 1), with issues realted to running
under just Linux (as opposed to Adnroid) mostly non-existent.
Consequently, we revert to using the value that is suggested in the
cmake WiKi, i.e. 1, and which is basically what we also used as a
workaround in the azure-iot-sdk-c paclkage up until d300b1d3b1.
A case were we will need to have a real kernel version, is if we one day
have a cmake-based pacakge that builds and installs a kernel module [3],
because it will need the _running_ kernel version to install it in
/lib/modules/VERSION/, but in that case it will anyway most probably
not be the headers version.
[0] https://cmake.org/cmake/help/v3.8/variable/CMAKE_SYSTEM_VERSION.html
[1] https://gitlab.kitware.com/cmake/community/wikis/doc/cmake/CrossCompiling
[2] https://duckduckgo.com/?q=CMAKE_SYSTEM_VERSION
[3] https://stackoverflow.com/questions/38205745/cmake-system-version-not-updated-for-new-kernel
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fc8a5f56b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Quoting the CMake documentation:
When the CMAKE_SYSTEM_NAME variable is set explicitly to enable cross
compiling then the value of CMAKE_SYSTEM_VERSION must also be set
explicitly to specify the target system version.
Thus, we should also set CMAKE_SYSTEM_VERSION in toolchainfile.cmake. It
is supposed to be set to the value of `uname -r` on the target. We don't
have that exact value available (unless we build the kernel), but the
value of BR2_TOOLCHAIN_HEADERS_AT_LEAST contains the (minimum) version
of the kernel it will run on, so it should be OK for all practical
purposes.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 36568732e4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the bump to version 1.15, libsquish can conditionally
build/install its shared library, which makes it possible to re-enable
this package for BR2_STATIC_LIBS configurations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ae4b9e4afb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While testing the new supertuxkart 0.10-beta1 version, the build
failed due to missing libsquash shared library.
Indeed, by default (see config file) the shared library is not build
and all symlinks created by LIBSQUISH_INSTALL_{STAGING,TARGET}_CMDS
are curently broken.
To fix that, add USE_SHARED=1 to LIBSQUISH_MAKE_ENV.
Also add a patch to allow reinstall the package.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b621273755)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
releases.nixos.org gives some weird XML pages. The upstream location is
nixos.org/releases.
This side uses HSTS, so switch to https to avoid a needless redirect.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e2fa462426)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit ec69d3820f (package/lighttpd: bump to version 1.4.52) bumped the
lighttpd version but forgot to adjust the upstream hash comment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b99b09caee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As xenomai release tarballs ship with a configure script, there is only a
need for autoreconfiguring when patches are applied.
The last patch was removed with git commit
de993bc23a but the AUTORECONF line remained.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4219c58c38)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream CHANGELOG entry for 4.3.0 lists these fixes:
- CVE-2018-18408 use-after-free in post_args (#489)
- CVE-2018-18407 heap-buffer-overflow csum_replace4 (#488)
- CVE-2018-17974 heap-buffer-overflow dlt_en10mb_encode (#486)
- CVE-2018-17580 heap-buffer-overflow fast_edit_packet (#485)
- CVE-2018-17582 heap-buffer-overflow in get_next_packet (#484)
- CVE-2018-13112 heap-buffer-overflow in get_l2len (#477 dup #408)
Drop tr_cv_libpcap_version and ac_cv_have_bpf; unused in current
configure script.
Make configure script use pcap-config to list library dependencies.
Unfortunately, pcap-config is not entirely correct, so we still need to
set the LIBS variable for static linking.
Use the smaller tar.xz archive.
Add license file hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f5961ff56a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 62d5558f76 (utils/get-developers: make it callable from elsewhere
than the toplevel directory) tried to fix this by passing in the toplevel
directory when the DEVELOPERS file is parsed.
Unfortunately this is not enough, as E.G. also the paths listed in the
patches are relative to the toplevel directory, causing it to not match the
entries in the DEVELOPERS file.
In concept this can be fixed by also passing the toplevel directory to the
Developers class, but the simplest solution is just to chdir to the toplevel
Buildroot directory before calling any of the getdeveloperlib functions.
This does require us to finish parsing command line arguments (which opens
the provided patch files) to not get into trouble with relative paths to
patches before chdir'ing / initializing getdeveloperlib.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 45aabcddc5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 62d5558f76.
This actually does not work, as patches contain paths relative to the
toplevel directory as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 74fbc20504)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes regressions introduced by the v8.14.0 security release. From the
announcement:
The 8.14.0 security release introduced some unexpected breakages on the 8.x
release line. This is a special release to fix a regression in the HTTP
binary upgrade response body and add a missing CLI flag to adjust the max
header size of the http parser.
https://github.com/nodejs/node/blob/master/doc/changelogs/CHANGELOG_V8.md#8.15.0
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6f68e5cf72)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This update includes two specific fixes that have been backported
to the glibc 2.28 release branch from the glibc master branch:
1) UAPI header file asm/syscalls.h has been merged into the UAPI
asm/unistd.h header file for the RISC-V architecture in the
4.20 kernel. This causes the glibc 2.28 build to break.
2) sysdeps/ieee754/soft-fp: ignore maybe-uninitialized with -O
[BZ #19444]. The current patch for this issue can now be dropped
from Buildroot.
Signed-off-by: Mark Corbin <mark.corbin@embecosm.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7ab6281075)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scp download is broken, because scp is called without filename argument and
only the server is specified. The call is:
scp <server> <outputfile>
but should be:
scp <server>/<filename> <outputfile>
Instead of assuming '-u' lists a full URL including filename (which it is
not), align with the wget helper where -u is the server URL and -f gives the
filename.
With this commit, an scp download can work if FOO_SITE_METHOD is explicitly
set to 'scp' and the server does not have a scheme prefix 'scp://'.
The next commit will handle the case where a scheme prefix is present.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: s/URL/URI/, as noticed by Yann.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4d6e20ff46)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Config.in comment of lua-msgpack-native only indicates that it
needs Lua 5.1, while the package can actually build with LuaJIT. This
commit adjusts the comment to match the reality.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6141506760)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Before this commit, the grub configuration file was copied to the
TARGET_DIR in a post-image hook, after the filesystem has been
generated. It was kinda working because the board/pc's grub
configuration and the default one are the same and the later was
copied during the build process of the grub2 package.
This commit ensures the custom board/pc grub configuration is copied at
the right time.
Signed-off-by: Grégoire Delattre <gregoire.delattre@gmail.com>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0b28397a9b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The following vulnerabilities have been fixed:
- wnpa-sec-2018-51 The Wireshark dissection engine could crash. Bug 14466. CVE-2018-19625.
- wnpa-sec-2018-52 The DCOM dissector could crash. Bug 15130. CVE-2018-19626.
- wnpa-sec-2018-53 The LBMPDM dissector could crash. Bug 15132. CVE-2018-19623.
- wnpa-sec-2018-54 The MMSE dissector could go into an infinite loop. Bug 15250. CVE-2018-19622.
- wnpa-sec-2018-55 The IxVeriWave file parser could crash. Bug 15279. CVE-2018-19627.
- wnpa-sec-2018-56 The PVFS dissector could crash. Bug 15280. CVE-2018-19624.
- wnpa-sec-2018-57 The ZigBee ZCL dissector could crash. Bug 15281. CVE-2018-19628.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2ec38321d6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to provide info about a bundle file, e.g. running "rauc info
bundle.raucb", rauc needs to use the unsquashfs progam from the squashfs
package.
This was not documented until upstream commit 10c501c12752 ("docs:
integration: document need for 'unsquashfs' tool for 'rauc info'"), but
is already present in rauc.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4a4dba21b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like the target acpica package needs host-flex and host-bison,
the host variant also needs the same dependencies. This allows to fix
the build of "make host-acpica", which was detected thanks to
per-package directory support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8681430628)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When libsseccomp support is enabled, docker-containerd uses pkg-config
to find libsseccomp, so we must depend on host-pkconf.
Fixes the following build issue, detected with per-package directory
support:
pkg-config: exec: "pkg-config": executable file not found in $PATH
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 14cbcbe2d4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove 0002-cmake-fix-ucontext-dection.path as it is now upstream.
Hash updated for README.md because upstream changed bug report links.
Release notes: https://mariadb.com/kb/en/mariadb-10311-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10311-changelog/
Fixes the following security vulnerabilities:
CVE-2018-3282 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Storage Engines). Supported versions that are affected
are 5.5.61 and prior, 5.6.41 and prior, 5.7.23 and prior and 8.0.12 and prior.
Easily exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful attacks
of this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2016-9843 - The crc32_big function in crc32.c in zlib 1.2.8 might allow
context-dependent attackers to have unspecified impact via vectors involving
big-endian CRC calculation.
CVE-2018-3174 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.61 and prior, 5.6.41 and prior, 5.7.23 and prior and 8.0.12 and prior.
Difficult to exploit vulnerability allows high privileged attacker with logon
to the infrastructure where MySQL Server executes to compromise MySQL Server.
While the vulnerability is in MySQL Server, attacks may significantly impact
additional products. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server.
CVE-2018-3143 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.41 and
prior, 5.7.23 and prior and 8.0.12 and prior. Easily exploitable vulnerability
allows low privileged attacker with network access via multiple protocols to
compromise MySQL Server. Successful attacks of this vulnerability can result
in unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-3156 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.41 and
prior, 5.7.23 and prior and 8.0.12 and prior. Easily exploitable vulnerability
allows low privileged attacker with network access via multiple protocols to
compromise MySQL Server. Successful attacks of this vulnerability can result
in unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-3251 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.41 and
prior, 5.7.23 and prior and 8.0.12 and prior. Easily exploitable vulnerability
allows low privileged attacker with network access via multiple protocols to
compromise MySQL Server. Successful attacks of this vulnerability can result
in unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-3185 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.23 and
prior and 8.0.12 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server as well as unauthorized update, insert or delete access
to some of MySQL Server accessible data. CVSS 3.0 Base Score 5.5 (Integrity
and Availability impacts).
CVE-2018-3277 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.23 and
prior and 8.0.12 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server.
CVE-2018-3162 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.23 and
prior and 8.0.12 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server.
CVE-2018-3173 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.23 and
prior and 8.0.12 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server.
CVE-2018-3200 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.23 and
prior and 8.0.12 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server.
CVE-2018-3284 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.7.23 and
prior and 8.0.12 and prior. Difficult to exploit vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash (complete
DOS) of MySQL Server.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 44755a82bd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His e-mail address is no longer valid. Sending an e-mail to this
address says (yes, the actual text is in French):
Veuillez prendre note que cette adresse n'est plus valide à la suite du départ de l'employé.
which means:
Please take note that this address is no longer valid following the employee departure.
Therefore, it does not make sense to list Sebastien in our DEVELOPERS
file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fb3a0cce03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained in [0], meson recognises a certain set of CPU famillies,
whose names slightly differ from those we know them as.
If we don't pass the proper cpu_familly, meson whines:
WARNING: Unknown CPU family 'i686', please report this at [...]
Subsequently, packages that use that to decide on what they should build
and how they should build it, fail to build. That is the case for the
upcoming systemd-boot, for example.
Fix that by using the list propvided by the meson documentation [0].
[0] https://mesonbuild.com/Reference-tables.html#cpu-families
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- split in its own patch
- imnprove commit log
]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f3bacda0c0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As explained in [0], meson will try on its own to decide whether it can
run what it builds. If it happens that the host and target CPUs are
"compatible", that test may fail and meson may believe it can run what
it builds.
Override that test by using needs_exe_wrapper=true, and not defining an
actual exe_wrapper.
[0] https://mesonbuild.com/Cross-compilation.html
Signed-off-by: James Hilliard <james.hilliard1@gmail.com>
[yann.morin.1998@free.fr:
- split in its own patch
- improve commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f112f2b991)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit aa556e2035
("utils/genrandconfig: test with BR2_OPTIMIZE_2=y"), we are doing
builds at -O2 instead of -Os. This has unveiled an issue in the
strsep.c file:
strsep.c:65:23: error: register name not specified for 'delim'
register const char *delim;
This strsep.c compatibility code is compiled in if HAVE_STRSEP is not
defined, but dhcpdump does not use any kind of configure script to
detect the availability of strsep(). Therefore by default, it gets
compiled in, and the "register" specifier used for some variable
declarations in strsep.c cause build issues at -O2.
A previous commit in Buildroot from
c2a7f0d605 ("dhcpdump: Fix strsep()
feature test"), attempted to fix this problem by changing the test on
HAVE_STRSEP by a test on _BSD_SOURCE.
Unfortunately, _BSD_SOURCE is not meant to be tested: it's a feature
macro that is meant to be *defined* by some code to tell the C library
headers to expose (or not) some given functionality.
So instead, we basically revert commit
c2a7f0d605 by dropping the patch, and
pass -DHAVE_STRSEP in the CFLAGS when building dhcpdump.
Fixes:
http://autobuild.buildroot.net/results/7231170d3d3e3637f02382c1a0a96009b0527618/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 136c8862cf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building a minimal defconfig such as:
BR2_arm=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_TOOLCHAIN_EXTERNAL_CUSTOM=y
BR2_TOOLCHAIN_EXTERNAL_DOWNLOAD=y
BR2_TOOLCHAIN_EXTERNAL_URL="http://autobuild.buildroot.org/toolchains/tarballs/br-arm-full-2018.05.tar.bz2"
BR2_TOOLCHAIN_EXTERNAL_GCC_4_9=y
BR2_TOOLCHAIN_EXTERNAL_HEADERS_4_1=y
BR2_TOOLCHAIN_EXTERNAL_LOCALE=y
BR2_TOOLCHAIN_EXTERNAL_CXX=y
BR2_INIT_NONE=y
BR2_SYSTEM_BIN_SH_NONE=y
BR2_PACKAGE_XORG7=y
BR2_PACKAGE_XAPP_RGB=y
by running "make xapp_rgb" gives the following build failure:
checking for RGB... configure: error: in `/home/test/buildroot/output/build/xapp_rgb-1.0.6':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables RGB_CFLAGS
and RGB_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
The configure script uses pkg-config, but host-pkgconf is missing in
the list of dependencies.
This issue was detected thanks to per-package directory support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 401b7b94a3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The first stage bootloader on LEGO MINDSTORMS EV3 only loads the first
256K of the flash memory (this is hard-coded in an EEPROM). So, the
second stage bootloader (U-Boot) cannot exceed this size.
Signed-off-by: David Lechner <david@lechnology.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b2e5014af5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
If per_listener_settings is set to true, then the acl_file setting was
ignored for the "default listener" only. This has been fixed. This does
not affect any listeners defined with the listener option.
https://mosquitto.org/blog/2018/12/version-155-released/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 726be29277)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-1160: Netatalk before 3.1.12 is vulnerable to an out of
bounds write in dsi_opensess.c. This is due to lack of bounds checking on
attacker controlled data. A remote unauthenticated attacker can leverage
this vulnerability to achieve arbitrary code execution.
For more details, see the release notes:
http://netatalk.sourceforge.net/3.1/ReleaseNotes3.1.12.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8aaf05916c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
NXP U-Boot tree has the following build issue:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx7dsabresd/imximage.cfg.cfgtmp
arch/arm/imx-common/Makefile:91: recipe for target 'u-boot-dtb.imx' failed
make[2]: *** [u-boot-dtb.imx] Error 1
Makefile:877: recipe for target 'u-boot-dtb.imx' failed
This issue has been fixed by commit f916757300c1 ("imx: Create
distinct pre-processed mkimage config files"), so backport this
commit to the NXP U-Boot tree in order to fix the build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/136980027
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 98524e573c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
U-Boot 2017.11 has the following build issue:
MKIMAGE u-boot-dtb.imx
Error: No BOOT_FROM tag in board/freescale/mx6slevk/imximage.cfg.cfgtmp
arch/arm/mach-imx/Makefile:86: recipe for target 'u-boot-dtb.imx' failed
make[2]: *** [u-boot-dtb.imx] Error 1
Makefile:907: recipe for target 'u-boot-dtb.imx' failed
make[1]: *** [u-boot-dtb.imx] Error 2
make[1]: *** Waiting for unfinished jobs....
This issue has been fixed by commit f916757300c1 ("imx: Create
distinct pre-processed mkimage config files"), which landed in
U-Boot 2018.05.
Bump the U-Boot version to fix this build error.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/136980040
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1fc75dfbde)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
shairport-sync creates its pidfile at /var/run/shairport-sync/, so pass
that path to start-stop-daemon in the stop operation.
Also pass the executable path, allowing start-stop-daemon to check if
the PID matches the shairport-sync process, preventing killing some
other inocent daemon.
Fixes:
https://bugs.busybox.net/show_bug.cgi?id=11566
Reported-by: Bin Zhang <yangtze31@gmail.com>
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6568b93929)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
setup.py explicitly listed a maximum allowed version of python-requests,
causing runtime failures with the python-requests version we have:
Loaded image: docker-enp.bin.cloud.barco.com/eis/baseos-docker-snmp:0.1.0
Traceback (most recent call last):
File "/usr/bin/docker-compose", line 6, in <module>
from pkg_resources import load_entry_point
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3123, in <module>
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3107, in _call_aside
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 3136, in _initialize_master_working_set
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 580, in _build_master
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 593, in _build_from_requirements
File "usr/lib/python2.7/site-packages/pkg_resources/__init__.py", line 781, in resolve
pkg_resources.DistributionNotFound: The 'requests!=2.11.0,!=2.12.2,!=2.18.0,<2.19,>=2.6.1' distribution was not found and is required by docker-compose
FAIL
Upstream regularly updates setup.py as new python-requests releases are
made, but it is unknown why new python-requests releases (which are supposed
to be backwards compatible) should not be allowed right away.
Add a path submitted upstream to only disallow new major versions, similar
to how the other dependencies are handled.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 53261d8082)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
go 1.11.3 fixes the following security issues:
cmd/go: remote command execution during "go get -u"
The issue is CVE-2018-16873 and Go issue golang.org/issue/29230. See the Go issue for details.
Thanks to Etienne Stalmans from the Heroku platform security team for discovering and reporting this issue.
cmd/go: directory traversal in "go get" via curly braces in import paths
The issue is CVE-2018-16874 and Go issue golang.org/issue/29231. See the Go issue for details.
Thanks to ztz of Tencent Security Platform for discovering and reporting this issue.
crypto/x509: CPU denial of service in chain validation
The issue is CVE-2018-16875 and Go issue golang.org/issue/29233. See the Go issue for details.
Thanks to Netflix for discovering and reporting this issue.
go 1.11.4 fixes issues, including regressions introduced by 1.11.3:
1.11.4 includes fixes to cgo, the compiler, linker, runtime, documentation, go
command, and the net/http and go/types packages. It includes a fix to a bug
introduced in Go 1.11.3 that broke go get for import path patterns
containing "...".
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d810fee306)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 4.11.1 release brings a large number of fixes:
https://xenproject.org/downloads/xen-archives/xen-project-411-series/xen-4111.html
Including a number of security fixes:
XSA-268: Use of v2 grant tables may cause crash on ARM (CVE-2018-15469)
XSA-269: x86: Incorrect MSR_DEBUGCTL handling lets guests enable BTS
(CVE-2018-15468)
XSA-272: oxenstored does not apply quota-maxentity (CVE-2018-15470)
XSA-273: L1 Terminal Fault speculative side channel (CVE-2018-3620,
CVE-2018-3646)
XSA-275: insufficient TLB flushing / improper large page mappings with AMD
IOMMUs
XSA-276: resource accounting issues in x86 IOREQ server handling
XSA-277: x86: incorrect error handling for guest p2m page removals
XSA-278: x86: Nested VT-x usable even when disabled (CVE-2018-18883)
XSA-279: x86: DoS from attempting to use INVPCID with a non-canonical
addresses
XSA-280: Fix for XSA-240 conflicts with shadow paging
XSA-282: guest use of HLE constructs may lock up host
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a368ae1cee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, U-Boot is failing to build, due to some issues
with the toolchain and the U-Boot port.
Fix it.
Signed-off-by: Ezequiel Garcia <ezequiel@collabora.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit aacf3acb84)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There are various versions shipped in linux-firmware. In the past we
decided that it was up to the developer to filter out the ones they want
for their specific kernel version, so install them all.
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6a6f9306d8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
luvi fails to run when it was build with CMake 3.12+:
```
[string "return require('init')(...)"]:1: module 'init' not found:
no field package.preload['init']
no file './init.lua'
no file '/usr/share/luajit-2.0.5/init.lua'
no file '/usr/local/share/lua/5.1/init.lua'
no file '/usr/local/share/lua/5.1/init/init.lua'
no file '/usr/share/lua/5.1/init.lua'
no file '/usr/share/lua/5.1/init/init.lua'
no file './init.so'
no file '/usr/local/lib/lua/5.1/init.so'
no file '/usr/lib/lua/5.1/init.so'
no file '/usr/local/lib/lua/5.1/loadall.so'
```
Looking at link.txt for the luvi executable shows that `-rdynamic` is
not set anymore in CMake 3.12. This has the effect, that symbols are
missing in the `.dynsym` section in the binary.
The patch, sets `ENABLE_EXPORTS` to true in CMakeLists.txt to force setting
`-rdynamic` explicitly.
Upstream status: b8781653dcb8815a3019a77baf4f3b7f7a255ebe
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 56d2ac54dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a maintenance release of the current stable WebKitGTK+ version,
which contains security fixes for CVE identifiers: CVE-2018-4437,
CVE-2018-4438, CVE-2018-4441, CVE-2018-4442, CVE-2018-4443, and
CVE-2018-4464. Additionally, it fixes a couple of build failures in
unusual build configurations.
Release notes can be found in the announcement:
https://webkitgtk.org/2018/12/13/webkitgtk2.22.5-released.html
More details on the issues covered by security fixes can be found
in the corresponding security advisory:
https://webkitgtk.org/security/WSA-2018-0009.html
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6bbfaf1d40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to version 2018.11 to resolve the following build failure:
corelib/channel_curl.c: In function ‘channel_map_curl_error’:
corelib/channel_curl.c:298:2: error: duplicate case value
case CURLE_SSL_CACERT:
^
corelib/channel_curl.c:297:2: error: previously used here
case CURLE_PEER_FAILED_VERIFICATION:
^
when building with CONFIG_DOWNLOAD=y. This issue is happening since
the libcurl bump to 7.62.0.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1040b18634)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
1.15.7 contains a number of bugfixes. From the changes file:
*) Bugfix: memory leak on errors during reconfiguration.
*) Bugfix: in the $upstream_response_time, $upstream_connect_time, and
$upstream_header_time variables.
*) Bugfix: a segmentation fault might occur in a worker process if the
ngx_http_mp4_module was used on 32-bit platforms.
https://nginx.org/en/CHANGES
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bc60c57f69)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libgpgme installs a gpgme-config script, it should be tweaked using
the <pkg>_CONFIG_SCRIPTS mechanism. This is generally useful and is
going to be particularly important with per-package directories.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3df53aa11d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Definitions of POLLWRNORM, POLLWRBAND and POLLREMOVE in xtensa linux
kernel are non-standard. Provide bits/poll.h with correct values for
these constants for uclibc-ng.
This fixes the following strace build errors:
In file included from xlat/pollflags.h:4:0,
from poll.c:34:
./static_assert.h:40:24: error: static assertion failed: "POLLWRBAND != 0x0100"
# define static_assert _Static_assert
^
xlat/pollflags.h:75:1: note: in expansion of macro ‘static_assert’
static_assert((POLLWRBAND) == (0x0100), "POLLWRBAND != 0x0100");
^~~~~~~~~~~~~
./static_assert.h:40:24: error: static assertion failed: "POLLREMOVE != 0x0800"
# define static_assert _Static_assert
^
xlat/pollflags.h:117:1: note: in expansion of macro ‘static_assert’
static_assert((POLLREMOVE) == (0x0800), "POLLREMOVE != 0x0800");
^~~~~~~~~~~~~
Fixes:
http://autobuild.buildroot.net/results/5a0112b7a2c81fa5253c9adc93efe415256cd811
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 95f11fb25d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When one of BR2_PACKAGE_FFTW_PRECISION_* is enabled, liquid-dsp links
against fftw3f, fftw3 or fftw3l, but forgets to add the fftw package
in its dependencies. It works fine in practice because "fftw" is
before "liquid-dsp" in the alphabetic ordering, but building with
"make liquid-dsp" or with per-package directory causes a build
failure.
Fix that by adding the missing dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Reviewed-by: Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2517fa73ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The sdl2_net configure script uses pkg-config to finx sdl2. If it
doesn't find pkg-config, it tries to locate sdl2-config, and defaults
to /usr/bin/sdl2-config, which causes the build to fail with:
arm-linux-gcc: ERROR: unsafe header/library path used in cross-compilation: '-I/usr/include/SDL2'
Fix this by adding host-pkgconf to the dependencies of sdl2_net. We
could have added the right autoconf cache variable to tell the
configure script where sdl2-config is located, but since pkg-config is
tried first, let's use that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c2a1bcb1b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The lua-cqueues build system uses m4 during the build:
cd /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src && m4 /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.m4 >| /home/test/autobuild/run/instance-1/output/build/lua-cqueues-rel-20161215/src/errno.c.tmp
Therefore, the package should depend on host-m4. This has been
detected using per-package directory support, but a minimal defconfig
with just lua and lua-cqueues on a system that doesn't have m4
installed system-wide also exhibits the issue.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 1e5e1eac54)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like the build of the target wine, the build of host wine also
needs bison and flex, otherwise the build fails with:
checking for flex... no
configure: error: no suitable flex found. Please install the 'flex' package.
(and similarly for bison once host-flex is provided)
This was detected using per-package directories. It used to "work"
because host-wine comes alphabetically after host-flex and host-bison,
which are dependencies of target wine.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit e4d153b16a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security vulnerabilities:
- Node.js: Denial of Service with large HTTP headers (CVE-2018-12121)
- Node.js: Slowloris HTTP Denial of Service (CVE-2018-12122 / Node.js)
- Node.js: Hostname spoofing in URL parser for javascript protocol
(CVE-2018-12123)
- Node.js: HTTP request splitting (CVE-2018-12116)
- OpenSSL: Timing vulnerability in DSA signature generation (CVE-2018-0734)
- OpenSSL: Microarchitecture timing vulnerability in ECC scalar
multiplication (CVE-2018-5407)
For more details, see the announcement:
https://nodejs.org/en/blog/release/v8.14.0/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0de2c9c76c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes configure error
checking for the ability of -lsrtp2 to be linked in a shared object... yes
checking for srtp_crypto_policy_set_aes_cm_256_hmac_sha1_80 in -lsrtp2... yes
checking for srtp_crypto_policy_set_aes_cm_192_hmac_sha1_80 in -lsrtp2... no
checking for srtp_crypto_policy_set_aes_gcm_128_8_auth in -lsrtp2... no
checking for srtp_shutdown in -lsrtp2... yes
checking for srtp2/srtp.h... (cached) yes
configure: WARNING: ***
configure: WARNING: *** OpenSSL required when using libsrtp2, checking for libsrtp instead.
configure: WARNING: ***
using this defconfig:
BR2_PACKAGE_LIBSRTP=y
BR2_PACKAGE_ASTERISK=y
Please note that openssl support in libsrtp is not available for static
builds:
https://git.buildroot.net/buildroot/tree/package/libsrtp/libsrtp.mk#n27
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c48bff9da6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit 38de434123 ("download: fix file:// BR2_PRIMARY_SITE
(download cache)"), the urlencode option is no longer passed to the
download backend, because we use ${backend} instead of
${backend_urlencode}.
We must get the urlencode information from backend_urlencode.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
[Thomas: rework commit log]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit bb7c13273f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The bananapi_m2_plus defconfig uses a 4.18 kernel, but doesn't specify
anything for the kernel headers version, so the Buildroot default gets
used, which currently is 4.19. Since 4.19 is newer than 4.18,
Buildroot rightfully whines:
Incorrect selection of kernel headers: expected 4.19.x, got 4.18.x
Let's fix this by telling this defconfig to use the headers from the
kernel, and that they are of version 4.18.
Fixes:
https://gitlab.com/buildroot.org/buildroot/-/jobs/131216938
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 3467aef183)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-19518: University of Washington IMAP Toolkit 2007f on UNIX,
as used in imap_open() in PHP and other products, launches an rsh command
(by means of the imap_rimap function in c-client/imap4r1.c and the tcp_aopen
function in osdep/unix/tcp_unix.c) without preventing argument injection,
which might allow remote attackers to execute arbitrary OS commands if the
IMAP server name is untrusted input (e.g., entered by a user of a web
application) and if rsh has been replaced by a program with different
argument semantics. For example, if rsh is a link to ssh (as seen on Debian
and Ubuntu systems), then the attack can use an IMAP server name containing
a "-oProxyCommand" argument.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1af5232138)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
liboping.c: In function 'ping_host_add':
liboping.c:207:9: error: '%s' directive output may be truncated writing
up to 255 bytes into a region of size 243 [-Werror=format-truncation=]
"%s: %s", function, message);
^~
liboping.c:1644:40:
ping_set_error (obj, "getaddrinfo", errmsg);
~~~~~~
liboping.c:206:2: note: 'snprintf' output between 14 and 269 bytes into
a destination of size 256
snprintf (obj->errmsg, sizeof (obj->errmsg),
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
"%s: %s", function, message);
Fixes:
- http://autobuild.buildroot.org/results/b12d86388b495a96194e0bcbb5c19a4e35cbc53d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8361c53eac)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic to ensure at least one compression backend is selected was not
updated when lz4, xz and zstd were introduced - Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
[Peter: add comment as suggested by Peter Seiderer]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 84aeb4419f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
prosody is not available for Lua 5.3, but only 5.1 & 5.2.
prosody needs the module BitOp which is included in LuaJIT
note: the actual config is working only LuaJIT
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 768a9b9dd7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported in bug #11426, the ppsfind shell script uses /bin/bash,
but the Buildroot pps-tools package doesn't depend on bash. In fact,
upstream has fixed the problem, and the script can now be used with a
POSIX shell, and the shebang is /bin/sh.
This commit therefore bumps pps-tools to the latest upstream commit,
which is precisely this fix.
Fixes bug #11426.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5c89726d9f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Lynx configure script uses pkg-config when available:
checking for nios2-buildroot-linux-gnu-pkg-config... /home/thomas/projets/buildroot/output/host/bin/pkg-config
checking pkg-config for openssl... yes
[...]
checking pkg-config for ncurses... yes
Using pkg-config avoids build failures such as:
checking for _nc_freeall... no
configure: error: Configuration does not support color-styles
make: *** [/home/test/autobuild/run/instance-1/output/build/lynx-2.8.9rel.1/.stamp_configured] Error 1
When building with "make lynx", so that pkg-config is not built
before. The issue is that in this case, lynx configure script picks up
the ncurses6-config script for the host ncurses instead of the one in
staging. Using pkg-config solves that nicely.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 67ee7f9eb1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using an initramfs, on the first-pass build, we create a dummy cpio
so that the build succeeeds. The real cpio will come later, and we'll do
a second-pass build to use the actual cpio.
However, when we touch that dummy cpio, the images/ directory may not
yet exist, since commit d0f4f95e39 (Makefile: rework main directory
creation logic) removed its creation at the begining of the build, to
only at the moment we need it, i.e. during the *_INSTALL_IMAGES_CMDS
steps.
However, the linux build is not a _INSTALL_IMAGES_CMDS step, so there is
no guarantee that images/ already exist at that time.
Fix that by explicitly creating images/ before touching the dummy cpio.
Reported-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Matthew Weber <matthew.weber@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 524fb10bbe)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit e13855c48f wrongly added
depends on BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU
to display the comment "libbsd needs a toolchain w/ threads, wchar"
The same error has also been made for minizip.
To fix this issue, move dependency
!(BR2_TOOLCHAIN_USES_UCLIBC && !BR2_USE_MMU) under
BR2_PACKAGE_LIBBSD_ARCH_SUPPORTS.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2261eb3a36)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcurl doesn't find any trust path for CA certs when it cross-compiles.
When using OpenSSL, it is explicitly configured to use the SSL cert
directory with OpenSSL style hash files in it. But with GnuTLS, it gets
nothing.
Rather than configure libcurl to use the OpenSSL directory or a bundle
file, configure it to use the GnuTLS default. This way the CA certs
path can be configured in one place (gnutls) and then libcurl and anyone
else who uses gnutls can default to that.
Also, when libcurl with gnutls is configured to use a directory, it ends
up loading each cert three times.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 43b4d3ae45)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gnutls is building with no default location to look for CA certs. Since
there are buildroot packages to provide these, configure it to use them
by default.
Configure gnutls to find them using the bundle file which contains all
certs, rather than looking in the cert directory. When gnutls is told
to use the directory, it loads *every* file in it. This means it loads
the bundle with all certs, then loads each cert a second time using the
individual pem files, and then loads them all the third time via the
hash symlinks to the pem files.
When p11-kit is enabled, use its trust module instead of the bundle
file. p11-kit can be configured to use the bundle (the default), but it
can do other things too, such as integrate with the "trust" command for
adding and removing trust anchors.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 379306e8f2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Docker upstream has split the Docker daemon and CLI into separate
codebases:
- github.com/docker/engine: daemon, "dockerd" binary
- github.com/docker/cli: "docker" command line interface
This commit splits the docker-engine package into docker-engine and
docker-cli. Conveniently, the Docker project has begun maintaining
two separate release-tagged repositories for the CLI and daemon as of
v18.06-ce-rc1. Previous versions were tagged in a common "docker-ce"
repository which makes compilation awkward for Buildroot, especially
due to some limitations in the new Go package infrastructure.
Docker repositories "engine" and "cli" recently started tagging
releases. Select the latest stable release, v18.09.0.
The CLI is no longer automatically included with the engine. Users
will need to select BR2_PACKAGE_DOCKER_CLI to produce a both docker
and dockerd target binaries.
Docker CLI can be statically compiled. This enables usage of the
system docker client binary to access the parent daemon API from
within containers, where shared libraries are not available.
While at it, drop the useless host-go dependency from docker-engine,
since it's already added by the golang-package infrastructure.
Signed-off-by: Christian Stewart <christian@paral.in>
[Thomas: drop the host-go dependency from both docker-cli and
docker-engine]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit de336584d2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit backports an upstream patch that fixes the build of
dt-utils with glibc 2.28+.
Fixes bug #11536.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7e5094033d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fstatfs/statfs on aarch64 seems broken, add a patch from uClibc-ng
upstream git to fix it.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 2179ca4a61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump also includes the fix for CVE-2018-6556 released in 3.0.2 via
commit "CVE 2018-6556: verify netns fd in lxc-user-nic": lxc-user-nic
when asked to delete a network interface will unconditionally open a
user provided path:
c1cf54ebf2
This code path may be used by an unprivileged user to check for the
existence of a path which they wouldn't otherwise be able to reach. It
may also be used to trigger side effects by causing a (read-only) open
of special kernel files (ptmx, proc, sys).
Also add a dependency on gcc >= 4.7
(https://github.com/lxc/lxc/issues/2592)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit df6a01af23)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2018-12-09 22:33:38 +01:00
7387 changed files with 83381 additions and 99941 deletions
gcc-6 correctly warns about a out of bounds access
arch/powerpc/kernel/ptrace.c:407:24: warning: index 32 denotes an offset greater than size of 'u64[32][1] {aka long long unsigned int[32][1]}' [-Warray-bounds]
offsetof(struct thread_fp_state, fpr[32][0]));
^
check the end of array instead of beginning of next element to fix this
# post-build.sh for Nanopi NEO, based on the Orange Pi PC
# 2013, Carlo Caione <carlo.caione@gmail.com>
# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr>
BOARD_DIR="$( dirname "${0}")"
MKIMAGE="${HOST_DIR}/bin/mkimage"
BOOT_CMD="${BOARD_DIR}/boot.cmd"
BOOT_CMD_H="${BINARIES_DIR}/boot.scr"
# U-Boot script
"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}""${BOOT_CMD_H}"
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
