Fixes runtime failure of gst-fsl-plugins, e.g.
(gst-plugin-scanner:1700): GStreamer-WARNING **: Failed to load
plugin '/usr/lib/gstreamer-0.10/libmfw_vpu.so':
/usr/lib/libgstfsl-0.10.so.0: undefined symbol: shm_open)
when compiled with buildroot/glibc toolchain.
See also old buildroot mailing list request [1].
[1] http://lists.busybox.net/pipermail/buildroot/2013-June/073910.html
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the GRAPH_OUT and GRAPH_ALT variables according to our
recently-agreed naming scheme for user-facing variables:
- GRAPH_OUT -> BR2_GRAPH_OUT
- GRAPH_ALT -> BR2_GRAPH_ALT
The documentation part of the rename is handled by Thomas as
part of his manual fixing spree. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/libtool/libtool-0001-mips64-n64-linking.patch touches an m4
file, so applying it triggers a run of autoconf, automake, etc. This
sometimes leads to build failures due to incompatible system autotools.
This was observed on Fedora 10, which has automake 1.11 while the
generated files that are included in the tarball require automake
1.11.1.
We cannot simply set HOST_LIBTOOL_AUTORECONF = YES because that would
create a circular dependency on host-libtool. Therefore, the patch
patch is applied on the installed libtool.m4 instead of in the source
tree. Then, it also needs to be renamed to something that doesn't
match buildroot's patch convention so it doesn't get picked up
automatically.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_PACKAGE_SCONESERVER_HTTP_SCONESITE_IMAGE option of sconeserver
selects imagemagick, but forgets to depends on BR2_USE_MMU, which
imagemagick depends on.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A number of packages that select Pango (which depends on BR2_USE_MMU)
forget to also depends on BR2_USE_MMU. This commit fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The libblkid library in util-linux uses fork. While it seems
potentially possible to disable the parts of the library that use fork
(the only parts using fork are parts related to LVM and Device Mapper,
which are said to be legacy as they are replaced by sysfs based
scanning, instead of having to fork to run a separate process).
However, since libblkid is used by:
- e2fsprogs, which uses lots of fork all over the place
- udev, which most likely will also need fork
There is not much point in making libblkid fork-less. As a
consequence, this commit makes util-linux/libblkid unavailable on
non-MMU architectures, and propagates the relevant dependency to the
reverse dependencies of libblkid.
This fixes the e2fsprogs build failure seen on Blackfin. The failure
was due to a configure test of e2fsprogs which was trying to link a
small test program against libblkid, which failed because there was an
undefined reference to fork() in the libblkid code.
Fixes:
http://autobuild.buildroot.net/results/ee2c1568d16ac040011dd4d6d8b543ff9e9e2622/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch cairo-001-blackfin-build-fix.patch was added in commit
d372d0b677 ('cairo: add patch to fix
Blackfin build failure') to take into account the fact that Blackfin
has a non-empty USER_LABEL_PREFIX: C symbol 'foo' corresponds to
assembly symbol '_foo', contrary to most other architectures where
they are the same.
However, the patch was only fixing the relevant macros in
src/cairo-compiler-private.h and did not take into account the
duplicated version of these macros in
util/cairo-script/cairo-script-private.h. This commit fixes that.
This commit is fixing a build failure on Blackfin, for which there was
no recorded autobuilder result because this problem was hidden by the
problem fixed by the previous commit ('cairo: fix build on Blackfin in
test/cairo-test-runner.c').
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ELDK now relies on Yocto, so it no longer has the funky
non-standard way of doing multilib. Also, we didn't mention that Yocto
toolchains/SDK are not suitable for usage with Buildroot. Therefore,
this commit rewords this part of the documentation to explain that
Yocto/OpenEmbedded SDKs cannot be used as external toolchains in
Buildroot, and why.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Replace ADI by Analog Devices, which is clearer for most people, and
remove the Xilinx external toolchains since we have deprecated them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Now that we have eglibc and glibc support in the internal backend, and
no longer marked as experimental, a little bit of rewording is
needed. It is no longer necessary to indicate that uClibc was
historically supported as the only C library, and that the glibc
support is experimental. We also update the rest of the description to
be less uClibc specific.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no need to tell people that they should remove stamp files: they
should use the make <pkg>-reconfigure and make <pkg>-rebuild make targets
instead. We still keep an explanation about stamp files, just to give the
user an insight on how Buildroot works internally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The conditional (suggested by me) introduced in 108952 (rt-tests: disable
for uclibc mips) isn't actually valid kconfig syntax, causing menuconfig to
error out.
Rewrite it to use proper syntax.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some architectures (eg. Arc, Cris, Hexagon, ia64, Parisc, Score and
Xtensa), the Linux buildsystem tries to call the cross-compiler when
installing the headers.
This is a spurious call, since a cross-compiler is not needed at all to
install the headers.
As some users have reported the issue, just add a comment in linux-headers.mk
directing the user to ignore those errors.
Reported-by: Noam Camus <noamc@ezchip.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To allow proper nesting of suboptions of a package, the suboptions should
come directly after the main option, and cannot be interleaved with a
comment.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The AM_PATH_ALSA macro in utils/alsa.m4 unconditionally uses -ldl. This
breaks compilation of alsa-utils (and probably other packages using this
macro) for targets that do not support dynamic loading, such as for
Blackfin FLAT binaries.
This patch updates the macro to check if dlopen is available, and use that
result to conditionally add -ldl to the list of libraries.
Fixes
http://autobuild.buildroot.org/results/de2/de286880973be956f6c504aa9a758171d6f49674/build-end.log
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit a9baea4345 ('pixman: add patch
to fix Microblaze build failure'), a patch is added to the pixman
package to avoid using the FE_DIVBYZERO definition when it is not
available. However, it was using the have_fe_divbyzero variable to
define or not HAVE_FEDIVBYZERO, while the AC_CHECK_DECL autoconf macro
sets the ac_cv_have_decl_FE_DIVBYZERO variable.
The end result was that the FE_DIVBYZERO macro was considered as never
being available. This commit fixes that by using the appropriate
variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages (actually, just oprofile) need to link against libiberty.
This option just installs libiberty.a so it has no effect on the target,
therefore it's not needed to add a config option for it.
Before binutils-2.24, there was a bug in libiberty/Makefile.in that
caused libiberty to be installed regardless of the
--enable-install-libiberty option. This problem wasn't noticed before
because binutils-2.24 is not selected on any of the autobuilders: the
version can only be selected if an internal toolchain is used, and it
defaults to 2.21.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Microblaze build of pixman was failing due to FE_DIVBYZERO not
being implemented. It turns out that the usage of it, like fenv.h and
feenableexcept() is optional. So the patch simply adds a configure
check and disables the appropriate code (which is only use in the
tests anyway).
This commit also renames the existing patch to follow the patch naming
convention, and get a reliable ordering when applying patches.
Fixes:
http://autobuild.buildroot.org/results/806/8064092cdbac85fbf4322429d29d5d11dc51860f/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libcgi always builds both the shared and static library, which doesn't
work on architecture that don't support shared library at all, such as
Blackfin with the FLAT format. libcgi uses autoconf, but not automake,
and the Makefile is not of the highest possible quality, so this
commit fixes the problem by introducing a "STATIC" variable that can
be set from the environment. When set to a non-empty value, the
Makefile assumes it should only build the static version of the
library.
Note that this package is in desperate need of some care: there is one
single patch that mixes several changes together, it doesn't have a
description or a Signed-off-by line, and there is now a github project
for libcgi at https://github.com/rafaelsteil/libcgi/ that has the same
fixes.
However, for the purpose of the master branch, we're doing the most
minimal fix possible, by just adding this STATIC variable.
Fixes:
http://autobuild.buildroot.net/results/625/625105bcaf26345f422b225787fc19611b65cd57/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable when using a uclibc version before 0.9.33 since dn_comp
function support was added in this version. Also disabling on AVR32
since any AVR32 toolchain will be based on a uclibc version older
than 0.9.33 (for using an external AVR32 toolchain).
[Peter: use dn_comp instead of __dn_comp]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for O=... has limitations, since it is interpreted
relative to the Buildroot tree, and thus may lead to unexpected results.
For example, running this:
make -C buildroot O=my-O
will not create my-O in the current working directory, but as a
sub-directory of the Buildroot tree, here in buildroot/my-O
Explain this in the manual (as is similarly done for BR2_EXTERNAL).
Also add a note that $(O) will be created if missing.
Also change O=.. and -C .. to O=<...> and -C <...> to make it explicit
this is an ellipse, not a relative path.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although it is possible to use relative paths, there are a few pitfalls
when doing so.
To avoid confusion for a (newcoming) user, use absolute paths in the
manual (as is done in examples for $(O)), since it is guaranteed to be
working without corner cases.
[Peter: s/relatively/relative/ as suggested by Thomas]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using a relative path for BR2_EXTERNAL, and using an external defconfig,
such as in (from a Buildroot top-dir):
make O=.. BR2_EXTERNAL=.. foo_defconfig
is broken. It is unclear why the %_defconfig rule recurses in that case.
This patch internaly makes BR2_EXTERNAL canonical (ie. makes it an absolute
path), and checks the directory exists.
[Peter: s/relatively/relative/ as suggested by Thomas]
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Romain Naour <romain.naour@openwide.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mpg123 needs MMU because the application that is built with this
package uses fork. Currently it is difficult to only build the
libraries for mpg123 so disabling the package all together when there
is no MMU support.
Note: mpg123 is an optional dependency of mpd but mpd already requires
BR2_USE_MMU so there is no need to add this as a dependency.
Fixes:
http://autobuild.buildroot.net/results/5b0/5b053af566dd122ae7e58893e77d5d5f3070fb9e
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 87492d244a ("aiccu: disable
for uClibc 0.9.31/0.9.32"), we made sure it was not possible to select
aiccu with uClibc 0.9.31 and 0.9.32, because they lack dn_skipname().
However, we still have the problem that external AVR32 toolchains can
select aiccu, which causes build failures. Therefore, we also disallow
aiccu on AVR32 altogether. We keep the 0.9.31/0.9.32 exclusions,
because if they are used on other architectures, it would also fail
due to the lack of dn_skipname().
Fixes:
http://autobuild.buildroot.org/results/a24/a2490d434152625d9208615d83f4c5d6daea79d0/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Evas has an optional mechanism to do asynchronous preloading of
images. This mechanism is optional, and in commit
b6d92bf415 ("libevas: async image
preload support needs threads support in toolchain"), Peter made sure
to disable the asychronous preloading when no thread support was
available.
Unfortunately, it seems like disabling the asynchronous loading is
rarely used, and it in facts fails to build: a member of structure is
not present when asynchronous preloading is disabled, but the code
continues to use it.
Since the fix is not obvious, and all this mechanism seems to have
changed completely in EFL 1.8.x, and we probably don't care much about
EFL without threads, this commit adds a dependency of libevas on
thread support. Consequently, it also reverts commit
b6d92bf415 which is no longer necessary.
Of course, this commit propagates this additional dependency to the
reverse dependencies of libevas.
Fixes:
http://autobuild.buildroot.org/results/6de/6de90018a9eeb9c495d15046a8b3270eb95a5550//http://autobuild.buildroot.org/results/693/693df99db4ab357b48d427be3a72f6d64dd53065//
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To be sure that host-autoconf dependency is already built move the
call to autogen.sh from SDL_POST_PATCH_HOOKS to SDL_PRE_CONFIGURE_HOOKS.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
ramfs (which is used instead of tmpfs if CONFIG_SHMEM isn't enabled in the
kernel configuration), defaults to mode 0755 instead of 01777 like tmpfs
uses.
/tmp should be world writable and sticky, so explictly enforce the mode so
ramfs users gets it correct instead of relying on the defaults.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The tvheadend configure script fails to correctly handle spaces in any of
the options passed to it. If ccache is used the configure script fails to
handle the space in the --cc option and errors. Also the --cflags option
fails to handle multiple entries and only uses the first one. This patch
simple removes setting the --cc and --cflags options as the configure
script will correctly use the CC and CFLAGS variables already passed in
TARGET_CONFIGURE_OPTS.
Signed-off-by: Martin Bark <martin@barkynet.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
coreutils was not building in the static link case with uClibc, due to
binaries being linked with librt (for timer functions), but not with
libpthread. However, librt uses functions from libpthread, so both
must be specified. This lack of linking against libpthread was caused
by a deficiency in one of the gnulib m4 macro, for which we add a patch.
Fixes:
http://autobuild.buildroot.org/results/bd4/bd4cc779b46e3837e3d6c43c97eaf42fdfc3a288/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pv configure script is somewhat stupid: if it cannot find the host
gettext tool msgfmt, it concludes that gettext is not available, and
provides its own minimal version. Unfortunately, this minimal version
conflicts with the available target gettext. We fix this by ensuring
that host-gettext is built if gettext support is enabled, by adding it
to the dependencies.
Fixes:
http://autobuild.buildroot.org/results/d30/d30db79190f2cf8953751d55a5d34644f60daec4/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AArch64 does not implement the SYS_open system call, but only the
SYS_openat system call, as should be done for all modern architectures
merged into the Linux kernel. This causes problems when building
libv4l 0.8.9, which are fixed by integrating an upstream patch,
available in a more recent version of libv4l. Backporting the patch is
preferred over bumping libv4l, as libv4l has a fairly large number of
reverse dependencies, and we don't want to break anything that close
to the release.
Note that this commit also renames the existing libv4l-largefile.patch
to libv4l-01-largefile.patch in order to comply with the Buildroot
patch naming scheme, and guarantee the order in which patches are
applied.
Fixes:
http://autobuild.buildroot.org/results/ed6/ed66792e332ee0256a17f98cbe21dfcfe6e8743b/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit 52eeb04c76 ('libsepol: fix
static-only library build') I forgot to git add the changes made to
the libsepol.mk file itself. Those changes are needed to actually pass
STATIC=<something> when building static libraries only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu does not recognize 'uclinux' as a supported platform. While making
it recognize uclinux is easy, there is another problem down the road:
icu does very weird things to generate an ELF library containing
static data (libicudata.a), and the generated library being ELF, it is
not compatible with the FLAT binary format expected by uclinux
platforms such as Blackfin in FLAT format.
Therefore, we simply disallow the selection of icu on FLAT
platforms.
Note that adding a dependency on BR2_BINFMT_ELF doesn't work, because
BR2_BINFMT_FDPIC is considered to be separate (even if technically
FDPIC is a derivative of ELF). That's why the dependency we're adding
is "depends on !BR2_BINFMT_FLAT" and not "depends on BR2_BINFMT_ELF".
Fixes:
http://autobuild.buildroot.org/results/b41/b415fed7fae4012bad7d8b53a481bd71bdab716f/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a number of issues. From the changelog:
- Avoid getting stuck in a loop writing huge key files, reported by Bruno
Thomsen
- Avoid crash on exit due to cleaned up keys before last packets are sent,
debugged by Ronald Wahl
- Fix a race condition in rekeying where Dropbear would exit if it received a
still-in-flight packet after initiating rekeying. Reported by Oliver Metz.
This is a longstanding bug but is triggered more easily since 2013.57
- Ensure that generated RSA keys are always exactly the length
requested. Previously Dropbear always generated N+16 or N+15 bit keys.
Thanks to Unit 193
- Fix DROPBEAR_CLI_IMMEDIATE_AUTH mode which saves a network round trip if the
first public key succeeds. Still not enabled by default, needs more
compatibility testing with other implementations.
- Fix signal handlers so that errno is saved, thanks to Erik Ahlén for a patch
and Mark Wickham for independently spotting the same problem.
And at the same time get rid of the TIMEVAL_TO_TIMESPEC as dropbear provides a
fallback implementation if not available (and has done so since 2006).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.3.8 support is removed since 334dca61 (kernel-headers: remove deprecated
versions 3.1, 3.3, 3.5), so let's get rid of the patch as well.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host python always had --disable-unicodedata, regardless of the
corresponding configuration option BR2_PACKAGE_PYTHON_UNICODEDATA.
Since the host python is used to byte-compile python modules, this meant
that such modules could not contain unicode strings. For example, following
statement in a python module:
print u"\N{SOLIDUS}"
would cause the byte-compilation to fail with message:
SyntaxError: ("(unicode error) \\N escapes not supported (can't load
unicodedata module)",
Instead, conditionally disable unicodedata based on
BR2_PACKAGE_PYTHON_UNICODEDATA, also for the host python.
This fixes bug #6542 (https://bugs.busybox.net/show_bug.cgi?id=6542)
Reported-by: Gernot Vormayr <gvormayr@gmail.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Transmission would incorrectly determine the C++ compiler when ccache is
enabled, causing a build with uTP to fail at the configure step.
This patch adds a patch against transmission, fixing the problem.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If BR2_PACKAGE_QT_STATIC is set, qtuio will not build a .so file, but .a.
However, the custom INSTALL_TARGET_CMDS and INSTALL_STAGING_CMDS
unconditionally attempted to copy the .so file.
This commit checks the requested Qt library type and copies the right
library for each case, taking into account that the static .a file does not
need to be copied to the target directory.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The devicetree data for BeagleBone Black is the am335x–boneblack.dts file
(includes "am33xx.dtsi" and "am335x-bone-common.dtsi")
BeagleBone White uses the am335x-bone.dts file.
Signed-off-by: Marcelo Gutiérrez <kuyurix@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If Lua support is requested in VLC, its configure script tries to find the
luac byte compiler, which fails if host-lua is not yet built.
This can be easily reproduced by setting a minimal config with vlc and Lua
enabled, and running: 'make clean toolchain vlc'. Final output is:
checking for LUA... no
configure: WARNING: Package lua5.2 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.2.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.2' found, trying lua 5.1 instead
checking for LUA... no
configure: WARNING: Package lua5.1 was not found in the pkg-config search path.
Perhaps you should add the directory containing `lua5.1.pc'
to the PKG_CONFIG_PATH environment variable
No package 'lua5.1' found, trying lua >= 5.1 instead
checking for LUA... yes
checking for luac... no
configure: error: Could not find the LUA byte compiler.
make: *** [<buildroot>/output/build/vlc-2.1.2/.stamp_configured] Error 1
Fix this problem by setting host-lua as a dependency to vlc.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It does not make much sense enabling opencv without its core module.
This configuration leads to build nothing (since all modules depend on
the core one), but install the configuration files (*.pc and *.cmake)
anyway.
This absurd situation may break the build-system of other packages
that would correctly find the *.pc (but does not check for the modules
they actually use), but would not build because of missing headers and
libraries.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
jimtcl tries to use 'ccache' (a non-buildroot host version) which may not
exist on the host system. If ccache is enabled in buildroot, the compiler
used by jimtcl is:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
If ccache is not present on the host, this results in the build error:
ccache <buildroot>/.../ccache <buildroot>/.../<tuple>-gcc
-D_GNU_SOURCE -Wall -I. -fpic -pipe -Os -c -o jim-subcmd.o jim-subcmd.c
make[1]: ccache: Command not found
This patch passes 'CCACHE=none' to the 'configure' script, disabling the
internal handling of ccache, so that ccache can be transparently passed
through CC.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
In a previous patch, the situation was already fixed for busybox. This patch
applies the same fix to uclibc: copy the config file from the configure
step, as linux is doing.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The three typical packages that use .config files in buildroot copy the
config file at different times in the build process:
busybox copies its .config from the post-extract hook.
linux copies its .config in the configure_cmds.
uclibc copies its .config from the post-patch hook.
Copying the .config file from the configure step is the only way to properly
support an OVERRIDE_SRCDIR that does not yet have the .config file, because
the extract and patch steps are skipped in that case.
For example, when setting a BUSYBOX_OVERRIDE_SRCDIR to a cleanly extracted
busybox tarball:
$ make busybox-dirclean busybox
rm -Rf [..]/output/build/busybox-custom
>>> busybox custom Syncing from source dir
>>> /home/tdescham/repo/contrib/busybox-1.21.1
rsync -au --exclude .svn --exclude .git --exclude .hg --exclude .bzr
--exclude CVS /home/tdescham/repo/contrib/busybox-1.21.1/
[..]/output/build/busybox-custom
>>> busybox custom Configuring
/bin/sed -i -e "/\\<CONFIG_NOMMU\\>/d"
[..]/output/build/busybox-custom/.config
/bin/sed: can't read [..]/output/build/busybox-custom/.config:
No such file or directory
make: *** [[..]/output/build/busybox-custom/.stamp_configured] Error 2
This patch modifies busybox.mk to copy the config file from the configure
step instead, as linux is doing, and fixing the described scenario.
This fixes bug #5030: https://bugs.busybox.net/show_bug.cgi?id=5030
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the build of systemd is broken with the internal toolchain
backend, because we have uClibc patches that add support for
execvpe(), but we also have a patch for systemd that adds execvpe(),
which was added when the internal uClibc didn't support execvpe().
However, simply dropping the patch is not a solution, as it would
break the build of systemd with any other uClibc than the ones built
with Buildroot. For example, a Crosstool-NG uClibc toolchain would
fail.
Beyond this execvpe() problem, there are also other problems that
prevented systemd from being built with unpatched uClibc.
This patch does the following:
* Add sequence numbers of systemd patches.
* Regenerate them to avoid fuzz.
* Improve the uClibc compatibility patch so that it:
- Detects whether execvpe() is available or not, and if not
available provide an implementation.
- Detects if dup3() is available or not, and if not available
provide an implementation.
- Detects if MSG_CMSG_CLOEXEC is defined or not, and if not, define
it to the appropriate value.
This has been tested with uClibc internal toolchain, uClibc external
toolchain built with Buildroot, uClibc external toolchain built with
Crosstool-NG, and glibc external toolchain.
Fixes bug #6776.
Fixes:
http://autobuild.buildroot.org/results/591/591c6055430da334bd1e46e7d01497add45da837/build-end.loghttp://autobuild.buildroot.org/results/e58/e5851939d2837d4e35a4c1d9ca6df3c93ed5a34b/build-end.loghttp://autobuild.buildroot.org/results/92e/92e4c40c69a3feb4046b2fe5a0d8c69d5a44a157/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable elfutils for avr32, because:
- elfutils uses canonicalize_file_name, which came after uClibc-0.9.31.
- avr32 uses a toolchain with uClibc-0.9.31
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch that commit a728e2fe35 (coreutils: fix build against uclibc
snapshot) adds mentions the wrong coreutils version in its description.
Also fix the sign-of tag while at it.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The xtensa port uses __xtensa_libgcc_window_spill in libgcc to implement
__builtin_frame_address. This symbol is local/hidden in libgcc. This is not a
problem when linking against static libgcc. But g++ defaults to
-shared-libgcc, thus breaking link against C++ shared libraries that are using
__builtin_frame_address as follows:
ld: test: hidden symbol `__xtensa_libgcc_window_spill' in .../libgcc.a(lib2funcs.o) is referenced by DSO
Add upstream patches that make libgcc_s.so a linker script that links in
unresolved symbols from the static libgcc, similar to the ARM and PowerPC
ports.
Fixes:
http://autobuild.buildroot.net/results/e2d/e2d1a763fa86b8575e2e48e6d73c018175f43e7c/
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported on IRC, our default busybox configuration doesn't support SHA
encoded passwords, breaking login if enabled under system configuration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Context:
The autobuilders were failing on the symbol _XData32 being in conflicts.
A patch had been added to SDL to add a check to the configure.in
Problem:
Sometimes, the build would fail, because of an _XData32 symbol being in
conflicts eventhrough the patch was here.
What was happening:
Following the classic buildroot workflow:
- Extract
- [...]
- Apply 001 patch, which touches configure.in AND configure
- Apply 002 patch, which touches configure.in
- Invoke autogen.sh
- [...]
Right before running autogen.sh, we have configure.in which is more
recent than configure, which is fine.
We then, execute autogen.sh which, basically, runs autoconf.
If your machine was lighty loaded, the time difference between
configure.in and configure was really tiny (ms order), which seems to be
neglected by autoconf.
The results was that the configure was *NOT* generated. And our second
patch was not taken into account.
If your machine was under heavy load, the time difference between the
two files would have been greater and then *maybe* picked up by
autoconf. And then the configure file was re-generated.
When the 0001 patch was introduced, SDL package did *NOT* run it's
autogen.sh, which is why it touches also the configure.
This came later, causing this behavior.
Fixes:
http://autobuild.buildroot.net/results/d1c/d1c36f634dbf6b6e5d18444c2a23dfd129202b80/
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The legacy support for the old BUILDROOT_DL_DIR and BUILDROOT_CONFIG
breaks down when make is invoked recursively - which is done in a few
cases, e.g. silentoldconfig, external-defs, ... These targets always
give a legacy error.
For BUILDROOT_DL_DIR, this is fixed by making sure that the original
value of BR2_DL_DIR taken from the environment is also exported again.
For BUILDROOT_CONFIG, this is fixed with an additional comparison of
the environment variable's value with the fake value that we introduce
ourselves.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use correct bin name so that JPEG_TURBO_REMOVE_USELESS_TOOLS fixup
actually removes it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use correct bin name so that LIBJPEG_REMOVE_USELESS_TOOLS fixup
actually removes it.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rpi-userland and libcoffi are not strictly required to boot up the
Raspberry Pi, so remove them from the defconfig.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cpanminus was marked as broken, now it becomes useless with the Perl infrastructure.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Perl infrastructure uses a host version of Module-Build
(see previous commit "host-perl-module-build: new package").
The target version is never used, so no need to patch it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The official Perl documentation refers only to PERL5LIB.
PERLLIB is obsolete, we don't need to be compatible with Perl4.
PERL5LIB is used in all environment, so it is simpler to just export it.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to the default version of U-Boot, at this time 2013.10.
Tested with an old uEnv.txt (i.e. using uImage) and with the
currently prefered zImage.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This goes hand-in-hand with the kernel update.
The version is taken from meta-ti.
The new kernel version, 3.12, requires a newer PM FW.
This should correspond to v05.00.00.02, though that tag
has not been pushed...
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Git repo version is taken from meta-ti.
It's a 3.12.10 kernel with TI's own patches on top.
The defconfig has been kept rather close to our old defconfig.
The kernel has been boot-tested using an NFS-root.
Apart from the kernel change, the linux headers has also been
updated from 3.8.12 to 3.12.10.
[Peter: drop UEVENT_HELPER_PATH setting]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise build fails in intl/relocatable.c with:
./relocatable.c: In function 'libintl_relocate':
./relocatable.c:402:40: error: 'INSTALLPREFIX' undeclared (first use in this function)
./relocatable.c:402:40: note: each undeclared identifier is reported only once for each function it appears in
[Peter: drop redundant 'else' part]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When mdev /dev management is chosen in the buildroot configuration, the
Linux configuration is updated automatically to set option
CONFIG_UEVENT_HELPER_PATH to "/sbin/mdev". However, the help text of this
option explicitly recommends not setting this option due to large
performance impact during boot (experienced first hand by the reporter ánd
author).
The mdev startup script S10mdev already sets the helper during userspace
boot, which will make sure mdev is working correctly.
Fixes bug #6596: https://bugs.busybox.net/show_bug.cgi?id=6596
Reported-by: Andreas Koop <andreas.koop@zf.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed with BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_CONFIG but not BR2_CONFIG.
Still export BUILDROOT_CONFIG but pointing to some phony value, to
make sure that scripts that still use it fail in a predictable way.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (all user-visible options should be
prefixed BR2_).
An entry is added to Makefile.legacy to warn users who have set
BUILDROOT_DL_DIR but not BR2_DL_DIR.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Linux kernel headers versions 3.1, 3.3, and 3.5 have been deprecated
since 2013.02 and thus can be removed in 2014.02.
For legacy handling, we automatically select versions 3.2, 3.4, and 3.6,
respectively.
Additionally, this patch removes the now unused symbol
BR2_DEPRECATED_SINCE_2013_02.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gdb versions 7.2.x and 7.3.x have been deprecated since 2013.02 and thus can
be removed in 2014.02.
For legacy handling, version 7.5.x is automatically selected.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ccache target package has been deprecated since 2013.02 and thus can be
removed in 2014.02. This does not change anything about host ccache (used
for speeding up builds).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch removes deprecated symbol BR2_HAVE_DOCUMENTATION and all its
usage. Additionally, it removes the now unused BR2_DEPRECATED_SINCE_2012_11.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The automake support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host automake support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The autoconf support on target has been deprecated for more than four
buildroot releases and thus can be removed. This doesn't change anything
about the host autoconf support.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Changes snmp++v3.3.3
====================
- Fixed: [APP-30] SNMP++ cannot BER decode Oids starting with 2 and
with second sub-identifier >39 correctly.
- Fixed: [APP-31] SNMP++ does not encode Oids starting with 2 and
second sub-ID greater than 47 correctly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the UBI FS target creates a ubinize configuration
file on-the-fly, for a single volume. Add an option to specify
a custom config file.
E.g., one might want to deploy a system with a volume for the
built ubifs image, a volume for a future upgrade image, and a
volume for user data.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scan_patchdir is called recursively. For this to work properly, the
variable path which is set to $1 at the very beginning must be local not
global.
A test case is to set BR2_GLOBAL_PATCH_DIR to 'mypatches' and having the
following tree in the buildroot root:
$ find mypatches/
mypatches/
mypatches/busybox
mypatches/busybox/subdir.patch
mypatches/busybox/subdir.patch/busybox-0001-abc.patch
mypatches/busybox/busybox-0002-def.patch
mypatches/busybox/asubdir.patch
mypatches/busybox/asubdir.patch/busybox-0003-xyz.patch
When running 'make busybox-dirclean busybox-patch' originally, you'd get:
Applying busybox-0003-xyz.patch using patch:
Applying busybox-0002-def.patch using patch:
Error: missing patch file
mypatches/busybox/asubdir.patch/busybox-0002-def.patch
While with this fix:
Applying busybox-0003-xyz.patch using patch:
Applying busybox-0002-def.patch using patch:
Applying busybox-0001-abc.patch using patch:
This fixes bug #6434 (https://bugs.busybox.net/show_bug.cgi?id=6434)
Signed-off-by: Daniel Mentz <daniel@exxm.de>
[Thomas: update commit message with test case]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual is a bit vague about whether Config.in and external.mk
are mandatory or optional.
Make it explicit in the manual that they are mandatory.
Reported-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All PowerPC CPUs do not support altivec instruction set; so enable its
support only when the sub-architecture support it.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add info about how to install a custom uboot on the zedboard.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The rpi-compositor was broken with the 1.4.0 release,
but we now have a fix from upstream.
Add this patch, and remove the 'depends on BROKEN'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
With toolchains that include linux kernel headers before the 3.4 kernel,
an issue exists with linux/mmc/ioctl.h in that it doesn't include
linux/types.h.
Merged the patch with an existing patch for mmc-utils as it modifies
the same file and fixes similar issues. Also updated the patch to
conform to the buildroot patch naming standard.
Fixes:
http://autobuild.buildroot.net/results/828/828c7a686736710c4fcb152230d0fa6b5f4d6ad3
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the grub package is selected it also selects
BR2_HOSTARCH_NEEDS_IA32_COMPILER. This triggers a test in dependencies.sh
to verify the host compiler can build 32 bit executables. Currently this
test does not set any output for the compiler which causes a stray a.out
to be create outside the output directory. This patch sets the compiler
output to /dev/null so no a.out is created but the test is still performed.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since the opencv package globally depends on BR2_TOOLCHAIN_HAS_THREADS
and BR2_USE_WCHAR, then cleanup these redundant (and useless)
dependencies in the opencv's sub-options.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Thanks to the previous patches, no-one is using pkgparentdir anymore, so
remove it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fourth parameter to inner-generic-package is no longer used. Removing
this parameters requires renaming all usages of $(5) to $(4), and updating
the calls to inner-generic-package (and equivalent for the other package
infrastructures).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In preparation of the removal of the 4th parameter to inner-generic-package
and the pkgparentdir helper function, this patch removes the direct usage of
this 4th parameter. The remaining usage
ifeq ($(4),boot/)
can become
$(filter boot/%,$(pkgdir))
instead (and similar for toolchain).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Variable FOO_DIR_PREFIX in inner-generic-package isn't really needed. The
contents of this variable are 'package' for normal packages, 'boot' for
bootloaders, and 'linux' for the linux kernel.
When patching a package, all you need to know is the directory where
patches can reside, which is already returned by $(pkgdir). In order to be
able to use this variable outside of inner-generic-package, we introduce a
target-specific variable PKGDIR that equals to this $(pkgdir).
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling make 'functions', the $(call) keyword is only needed if the
function takes arguments. For pkgdir, pkgname and pkgparentdir this is not
the case, so we can remove the call to make things more readable.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make the naming consistent (qstripped variant of a config option
should be named BR_XXX).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default of choosing the fixed-point implementation if
the target hardware does not have floating-point unit is not
always the best choice. Modern ARM hardware has floating
point support but most likely the fixed-point implementation
in Opus will still perform better. In particular if your CPU
supports the NEON extension.
This commit allows to select the fixed-point implementation
manually and sets the default based on the availability of
a floating-point unit.
[Peter: force option for sw float, slightly reword]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The pread/pwrite handling on the 0.9.33 branch doesn't take into
consideration architectures with an ABI requiring natural alignment for
64bit arguments (afaik ARM EABI, MIPS O32, PPC, SH and Xtensa), causing
havoc.
The issue has been brought with the uClibc developers, but so far a fix is
not available - So lets revert the patches for now as they cause real
issues.
For further details, see:
http://lists.busybox.net/pipermail/buildroot/2014-January/087050.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Our current stripping strategy requires that shared libraries have the
executable permission. However, this is by far not something
recognized as a standard behavior: Debian/Ubuntu distributions for
example do not have executable permissions on their
libraries. Therefore, pushing to upstream packages fixes that add the
executable permissions is not easy.
As a result, this commit improves the stripping logic so that it not
only strips the files that are executable, but also the ones that
match '*.so*', which should match both the shared libraries and the
dlopen()'able plugins, as long as they have a .so extension.
Thanks to this addition, a number of manual "chmod +x" done by various
packages can be removed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script finds libz in the distribution libraries, which causes
zlib support to be dropped from the cross-compiled GnuTLS.
Signed-off-by: Antoine Pierlot-Garcin <antoine@bokbox.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If two files with the same relative paths exist in multiple overlay
skeletons, and they have the same modification time and size, then rsync
might not copy the later file on top of the earlier file. This patch fixes
this by adding the -I option to the rsync commands used in the overlay
skeleton file installations. ("man rsync" indicates that this option turns
off the file-size/mod-date "quick check" behavior, causing all files to be
updated - more like the cp commands that we had originally.)
[Peter: use --ignore-times to make it obvious what the option does]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
iucode_tool is a program to manipulate Intel® X86 and X86-64 processor
microcode collections, and to use the kernel facilities to upgrade the
microcode on Intel system processors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: drop 'sid' from upstream URL]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some compilers, such as the Blackfin GNU compiler, prefix a character to any
C symbol in generated assembly code. If any assembly symbol is invoked
from C code, it needs to be prefixed as well.
Note: since autoreconf doesn't work with this package because automake
isn't used.
Fixes:
http://autobuild.buildroot.net/results/c40a22814b405de2c5c75139cfc393c863ed4b81/
[Ryan: add information about why patching configure is ok]
[Ryan: add renaming of patches to be consistent with standard]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a couple of buffer overflows so it should be considered as a
security bump (no CVEs though).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The uClibc options for sh2a is SH2A, not SHA2, and this value should
be used for sh2a, not sh2.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current git download helper creates the tarball by doing:
git archive <version> | gzip -c > <tarball>
Unfortunately, even if "git archive" fails and returns a non-zero
error code, gzip ignores that, compresses nothing, and returns success
(zero error code). The consequence of this behavior is that when the
git version provided in the package is incorrect, we are not failing
during the download step, but later on when trying to extract the
tarball (which was incorrectly created as a result of the failing git
archive).
To fix this, we change the tarball creation logic to:
git archive -o <tarball>.tmp <version> &&
gzip -c <tarball>.tmp > <tarball> &&
rm -f <tarball>.tmp
If the build is interrupted during the "gzip" command, we may leave
the .tmp file behind us, but this also happens with wget downloads,
and is generally not considered a problem, since this temporary file
will be overwritten next time we attempt to do download this package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Probably due to some copy/paste mistake, Config.in.sh was defining
BR2_ENDIAN to "LITTLE" when the architecture is BR2_x86_64. Due to the
fact that Config.in.sh is never included when we are building for
x86_64, this is a no-op, but is certainly good to clean up.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but internal variables should be name BR_foo, not
BUILDROOT_foo (I think ..).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udpcast was checking the (non-existing) BR_LARGEFILE variable to know if it
should enable stat64 or not, but the package itself depends on largefile
support and more importantly, configure doesn't look at this variable at
all, so we can just drop it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As the semantics of FOO_DIR_PREFIX will change in the following patch, we
want to remove unnecessary usage of this variable.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The intel microcode is a proprietary package which provides a data file
used to correct processors errors.
It was originally sent by Richard Braun <rbraun@sceen.net>
[Peter: set _LICENSE_FILES]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Richard Braun <rbraun@sceen.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If iconv is built before gnupg, this package will link against it; if it is
built after this package, it will not be linked against it. To make the
build reproducible, make sure that iconv is always built before this
package.
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the option to use a local directory as the source for
building the Linux kernel, which can be useful during
kernel development.
Signed-off-by: Rafal Fabich <rafal.fabich@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Move the GPM_RUN_AUTOGEN to be a PRE_CONFIGURE step because this step
depends on the dependancies being built. If it is a POST_PATCH step
the dependencies won't be built and the GPM_RUN_AUTOGEN step will fail
(if the host doesn't have autotools).
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
the initial implementation assumes that when a version found in
buildroot is different from the one in the X11 release, it
requires an upgrade. even though this is most likely the case, it
could be a downgrade too, and it's probably worth highlighting
such cases when it (rarely) happens.
LooseVersion from distutils is doing the low level job of sorting
version numbers represented in strings...
[Thomas & Thomas:
- do not count packages more recent in Buildroot than in the latest
X.org release as to be downgraded. If we have more recent version,
it's generally for a good reason, so we want to keep them as
is. Such packages are counted as "nothing to do", but for
information, we indicate that there are "More recent"
- also remove the "nothing to do" action indicator. It used to be a
simple dash, which was not really useful.
]
Signed-off-by: Nicolas Dechesne <ndec13@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some packages install locales to /usr/lib/locale.
Parse and purge unneeded ones there too.
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some toolchains include asm-generic/int-l64.h from their asm/types.h
file for certain 64-bit architectures. This causes a conflict between
types like this one:
asm-generic/int-l64.h:28:25: error: conflicting types for '__s64'
typedef __signed__ long __s64;
^
In file included from mmc.h:17:0,
from mmc_cmds.c:30:
asm-generic/int-ll64.h:29:44: note: previous declaration of '__s64' was
here
__extension__ typedef __signed__ long long __s64;
This patch has been submitted upstream.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Convert the ever growing drop-SUSv3-legacy patch to a sed expression.
Modify the initscript to create ed25519 server key.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Try to clarify how the wrapper passes arguments and why.
This is mainly because the output you can see when you build, does not
reflect what is invoked by the wrapper.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for h264 video deocding, audio playback and cec.
Some improvements in HDMI output management.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If any of the post-image scripts wants to create mtd/ubi images,
we need to expose an option for mtd-tools to be user-selectable.
[Peter: fix include order]
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
JOE is an easy-to-use, full-screen, terminal-based text editor.
http://joe-editor.sf.net
[Peter: add uClibc patch, add to package/Config.in, optional ncurses support]
Signed-off-by: Alan Ott <alan@signal11.us>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The zxing package currently selects libiconv when locale support is not
available in the toolchain. This patch stops the zxing package selecting
libiconv. The zxing package now uses uses libiconv if it's available
otherwise iconv support is disabled in zxing.
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop patches applied upstream.
Mark the rpi-backend as broken, since it segfaults.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with 1.4.0, weston requires wayland-scanner to build its DT.
So far, we got away with just hand-building wayland-scanner, and made
that available in HOST_DIR/usr/bin
But now, weston also requires wayland's DTD, which we did not take care of
in our dirty little hack.
So, the best solution is to just build a host-variant of wayland, so
we get both wayland-scanner, and the DTD.
But then, we do not build the target wayland-scanner (he, wayland tries
to run it at build time...). So it is a matter of just tweaking a little
bit the host .pc file (which weston uses to find wayland-scanner, sigh...)
and fake it as a target .pc file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use CFLAGS from command line
- Remove "Check C compiler type (optimization options)"
This test force optimization to -O3
while it is already set in CFLAGS
- Don't use host CPP
- Remove "Check for Large File Support"
LFS support is already set in CFLAGS
Note: configure script still use host nm
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
infozip's Makefile expect $(AS) to output by default to <basename>.o
but when called from Buildroot, the value for $(AS) is set
to to invoke the toolchain's $(AS) directly, and the output of it
goes to a.out.
So, define $(AS) with $(CC -c)
Reported-by: Кирилл Луценко <lucenko_kirill@mail.ru>
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with version 2.3.0, libroxml is now using autotools.
With autotools, the -Werror flag was dropped
-> no need for the patch libroxml-0001-werror.patch
With autotools, the availability of -Wno-*-unused is auto detected
-> no need for the patch libroxml-0002-wno-unused-result.patch
Signed-off-by: Tristan Lelong <tristan.lelong@blunderer.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnutls-01-gettime.patch was applied upstream, AUTORECONF is no longer
necessary.
The GNUTLS_LIBREGEX_CHECK_FIX didn't actually work before, because it was
overwritten by the autoreconf. It looks like things still work without
regex. However, this patch reinstates the regex support by setting
libopts_cv_with_libregex=yes in the environment.
Fixes http://autobuild.buildroot.net/results/b22/b22f2caa79f371c625939b65a88a2073382c5288
(failure in libvncserver) because gnutls.so is now properly linked with -lrt.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: file header, structure like gst-ffmpeg, drop unneeded libav args]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The gstreamer / gstreamer1 names are not directly obvious to outsiders, so
spell out the fact that they are about the 0.10 and 1.x versions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 25926af5 disabled udev support for the host variant, but forgot to
remove it from the (implicit) host dependencies.
Also reordered things to keep the HOST_* definitions together.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: move to hw menu, int type for nr modems, drop _BINARIES_DIR
variable, fix config file name]
Signed-off-by: Julien Boibessot <julien.boibessot@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cmake is the only build-system we support that does colour its output,
Also, since parallel builds generates intermixed output lines, it makes
for ugly-looking output.
Just disable cmake colouring globally.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the Buildroot tree is read-only, then $(TARGET_DIR_WARNING_FILE) is
copied read-only into target/ but we may want to remove it during the
build process.
This poses no real problem, since target/ itself is guaranteed to be
writable, but for good measure, force $(TARGET_DIR_WARNING_FILE) to be
writable itself.
Reported-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(UCLIBC_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to .config fail.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(KERNEL_SOURCE_CONFIG) is read-only (eg. because Buildroot's source
dir is), the rm of $(KERNEL_ARCH_PATH)/configs/buildroot_defconfig will
either fail, or prompt the user, both of which we want to avoid.
Make it writable by using $(INSTALL).
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp, don't 'rm -f']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If $(BUSYBOX_CONFIG_FILE) is read-only (eg. because Buildroot's
source dir is), the sed fixups to $(BUSYBOX_BUILD_CONFIG) fail.
Fixes: #4363
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: use $(INSTALL) instead of cp]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If the source target skeleton is read-only (eg. because Buildroot's
source dir is), modifications to the output target (such as creating
/etc/hostname and /etc/issue) fail.
(This can happen if the Buildroot source dir is NFS-mounted read-only
to be shared between different machines, for example).
Signed-off-by: Nathan Lynch <ntl@pobox.com>
[yann.morin.1998@free.fr: we use rsync now, not cp; --chmod=Du+w
suggested by Arnout; clarify commit log]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2013-6712.
Note that there's no xz format tarball for 5.5.8.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OTP R16B03-1 is a service release which corrects a few issues found in
the R16B03 release. The corrections are:
- The ODBC application was missing in the prebuilt Windows installers
- 3 corrections in the SSL application:
- Add missing validation of the server_name_indication option and test for
its explicit use.
- Elliptic curve selection in server mode now properly selects a curve
suggested by the client, if possible.
- The server did not indicate support for secure renegotiation during TLS
extension handling.
- In the syntax tools application a bug was introduced which broke
reverting of local funs. This is now corrected (thanks to Anthony
Ramine)
- wx - Solved a problem which caused the debugger to crash when closing a
window. Fixed static linking on Mac.
- xmerl - Fixed a problem in the SAX-parser when the header of the next
document was appearing in the buffer when using the
xmerl_sax_parser:stream/2 function.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We don't have libcddb in Buildroot, and the detection handling in
configure uses pkg-config, so explicitly disable it so we don't
need to build host-pkgconf just to notice that it isn't available.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
rtmpdump CAN work without a crypto backend (by passing CRYPTO=), so
don't enforce gnutls.
Fixes a dependency issue as gnutls needs wchar, but rtmpdump
(and polarssl/openssl) don't.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This seems to especially affect the kernel, but in an
interrupt-heavy system, this fixes a bug that can cause frequent
NULL pointer dereference crashes on ARM systems.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU tar > 1.13.17 interprets TAR_OPTIONS as an environment variable
containing options to be prepended to the set on the command line.
Since we use the same variable, if the user's environment already
contains TAR_OPTIONS, our use of the same variable name modifies
the environment and causes untars to misbehave when TAR_OPTIONS
causes a -xf to be prepended to the tar command line, likely
converting a subsequent flag into a spurious filename.
Signed-off-by: Nick Alcock <nick.alcock@oracle.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If tcpdump is enabled set ac_cv_path_tcpdump_path so that verbose output
is enabled on the target.
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Otherwise we get:
package/openssl/Config.in:1:error: recursive dependency detected!
package/openssl/Config.in:1: symbol BR2_PACKAGE_OPENSSL is selected by BR2_PACKAGE_GNUTLS
package/gnutls/Config.in:1: symbol BR2_PACKAGE_GNUTLS is selected by BR2_PACKAGE_OPENSSL
Which is caused by lftp doing:
select BR2_PACKAGE_GNUTLS if !BR2_PACKAGE_OPENSSL
And rtmpdump doing:
select BR2_PACKAGE_OPENSSL if !BR2_PACKAGE_POLARSSL && !BR2_PACKAGE_GNUTLS
Which confuses kconfig. Work around it by swapping gnutls and openssl in
rtmpdump so it matches lftp.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on the original new pkg patch submitted last Jan
and is part of the "Patchwork oldest patches cleanup #5".
[Peter: fix CONF_OPT indentation]
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a custom rootfs skeleton, the host-mkpasswd target is not
automatically built, even if some packages add users (i.e. when
PACKAGES_USERS is not empty).
In this case, the rootfs generation may fail because the mkpasswd
provided by some distribution does not support all options used in the
mkusers script.
This patch avoids such trouble by automatically adding the host-mkpasswd
package to the dependency list of the rootfs targets if users needs
to be created.
[Peter: minor rewording of commit message]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This CMake flag is now handled by the cmake-package infrastructure.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CMake offers a couple of places where one can specify how to build a
library:
- when you create the library target itself, by calling
add_library(target [SHARED|STATIC] ...)
- or globally, when you configure the build, by setting the
BUILD_SHARED_LIBS CMake flag.
* if the library target kind of library is specified:
it overrides the global setting BUILD_SHARED_LIBS;
* else, if the global setting BUILD_SHARED_LIBS is set:
it builds according to the BUILD_SHARED_LIBS flags;
* otherwise:
for linux, it will build static library (like BUILD_SHARED_LIBS
default is OFF).
So, we can consider the setting BUILD_SHARED_LIBS acts a bit similarly
to the autotools ones '--disable-static' and '--enable-shared'.
Thus, it makes sense for Buildroot to globally drive to CMake flags in
the cmake-package infrastructure.
It seems we never trigger this so far because:
- either we specified it in the *.mk file (e.g. opencv.mk);
- or it was already set per target by the projects' upstreams.
Followup patches will clean the remaining BUILD_SHARED_LIBS in the
package *.mk files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As this question has popped up multiple times on the mailing list, clarify
that selecting longterm 2.6 kernels requires the 'custom tarball' option
instead of 'custom version'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'printf' was introduced because it is more portable than 'echo -e'. But
when the escape sequences are just newlines we can just as well use
plain 'echo' (and remove the newline escape sequences).
This looks cleaner than having some lines with echo and some with
printf.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It is not buildroot convention to align the = signs in .mk files, so this
shouldn't be suggested in the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Shrinks library size. From the release notes:
Nathan Froyd at Mozilla noticed something odd in the libvorbis
sourcebase. Codebook 'length lists' only use integers in the range
of 0 to 32. Well, worse than integers, actually, longs. And the
lengthlists are big; the static data comprises the bulk of
libvorbisenc.
In the earliest days of Vorbis development 15 years ago, codebooks
were constructed differently and the lengthlists were quite small.
Longs still weren't necessary, but the wasted space was
negligible. When the coding strategy shifted and these lists
became much larger, no one caught the wasted space. The vast
majority of optimization was always for speed, not space. The only
concentrated effort in trimming Vorbis library size down over the
past decade had been in the decoder.
But now browsers need to ship encoders, and size matters. Add that
to 64 bit taking over (and doubling the wasted space in the
lengthlists), someone finally noticed the oversight.
That's a long way of saying [1]"Xiph.Org is pleased to announce
the release of libvorbis 1.3.4..."
No functional changes, but the encoder lib is now a shade over 25%
the size it was in the 1.3.3 release.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Config.in.legacy entry associated with the replacement of libnfc-llcp
was broken in multiple ways:
- it was not correctly added within the section for 2014.02 deprecation
(recently fixed by Yann E. Morin with commit
f169e5e105)
- it still had select/depend statements from the original symbol, which
should not be added in Config.in.legacy.
- it did not select the replacement symbol as to make the transition for
users more convenient.
- indentation of the help text was not tab+2spaces.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The on-target lzma package has been deprecated for a long time, so remove
it. This does not remove the support for generating lzma-compressed rootfs
images.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The buildroot manual contains a list of deprecated items, with their config
title text, and the location in the config menu. If the config text does not
mention a package name, this can be confusing.
For example, the symbol BR2_PACKAGE_FLEX_BINARY has as text:
'Install tool in the target', which outside of the flex context makes no
sense at all.
To make sure the deprecated packages list in the manual is understandable,
rename the (deprecated) flex 'target binary' config option.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since this is the only package depending on BR2_DEPRECATED_SINCE_2012_05,
remove that symbol as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
support/dependencies/dependencies.sh uses #!/bin/sh shebang. It is not
guaranteed that /bin/sh provides an 'echo' implementation that
understands the '-e' flag (interpret backslash escape chars). For
example, dash doesn't.
'printf' is more portable (it must interpret backslash escape chars,
according to POSIX), so use that.
NOTE: Before the previous commit, the dependencies.sh script used
/bin/echo instead of the shell built-in. That's probably why this hasn't
come up before.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch has been merged upstream, hence the bump and its removal
from package directory.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename the defconfig to note that it's explicitly intended for the PA
kit revision since it'll likely brick a PB if the bootloader is flashed
without changing the U-Boot board name (and that it's untested in real
hardware).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot fails to run on NixOS because it has no /bin/echo or
/bin/grep. Instead of relying on absolute paths, rely on tools to be
available in PATH. This should work for all systems.
Signed-off-by: Bjørn Forsman <bjorn.forsman@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit c3d690166c.
The real cause of problem is missing posix_fadvise() implementation in uClibc
for xtensa. This has now been fixed with the uclibc version bump. The internal
e2fsprogs posix_fadvise() implementation is broken on 32bit systems anyway, and
upstream has removed it.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only enable SDL support if SDL and SDL_net are already enabled in the
configuration.
[Peter: drop SDL comment]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: use homepage rather than trac as pointed out by Yann]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As said in its help text, eigen heavily uses C++ features.
So, explicit this dependency in the Config.in.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A slew of fixes and improvements, specially directed toward, but
not limited to, the sample codes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bring a slew of fixes and improvements to:
- boot hang
- camera zoom, night mode
- MJPEG decoder/encoder
- video decoder/encoder
- dispmanx (3D engine)
- documentation
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit 94dd02f5d0.
The change breaks defconfigs from BR2_EXTERNAL, both for in-tree and
out-of-tree builds.
Besides, the problem reported in 94dd02f could not be reproduced.
I can read French, and I suspect a relative path was used for either
BR2_EXTERNAL or O.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The compilation of the program weston-launcher is currently disabled, so
the only way to launch Weston (on framebuffer) is to execute (as root):
$ openvt -c 2 -s -- weston \
--backend=/usr/lib/weston/fbdev-backend.so \
--tty=2 \
--log=/tmp/weston.log
Unfortunately you will only end up with a black screen. The reason is
given in the log file:
/dev/tty2 is already in graphics mode, is another display server running?
Here is the fix from upcoming version 1.4.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 0a5d524015 added a libmodplug package
to Buildroot; this means that libmodplug support can now be enabled for the
vlc package.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Suppress the following error:
route: SIOCDELRT: No such process
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This change adds firmware for the Chelsio T4 1Gb/10Gb ethernet cards.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add revision 17 of the Broadcom NetXtreme II 10Gb ethernet driver.
We also add an ethernet submenu for the firmware selection.
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Minor nit: Like "hardware", "software" and "sheep", the plural of
"firmware" is "firmware".
Signed-off-by: Jeremy Kerr <jk@ozlabs.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
20131113:
Added devices: Quanta 1KR / USB-lte 7410, Quanta MobileGenie 4G lte,
AVM Fritz!Wlan USB N v2, Alcatel-sbell ASB TL131 TD-LTE, Vodafone K4305,
K5150, K4201, K4202 and K4606; ZTE MF821D (Variant), ZTE MF70, ZTE MF60,
Haier EVDO Rev. A; several cleanups and fixes. Special thanks to Lars
Melin for many device contributions and corrections!
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
AMD Jaguar ( https://en.wikipedia.org/wiki/Jaguar_%28microarchitecture%29 ) is
suddenly a popular architecture since it is used in the PS4 and the XBox One.
Many embedded systems are also likely to use it in the next years.
This patch adds support for GCC architecture-specific optimisations and
tuning for these CPUs.
These optimizations are available with GCC 4.8+.
Signed-off-by: Adrien Beraud <adrien.beraud@savoirfairelinux.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
psplash doesn't see a new release for quite some time. The lattest
commits brought some nice bug fixes and a feature that allows to
easily customize the splash image.
[Peter: COPYING file no longer available]
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently ld-linux-armhf.so.* is added to external libs when
using an EABIhf toolchain, but this naming is not used by uClibc.
Fix by adding a check for glibc.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
protobuf-c only requires protobuf when building the protoc compiler,
hence protobuf can be dropped from the target dependencies.
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Eliminate the following error message on every boot:
grep: /etc/resolv.conf: No such file or directory
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mmc-utils provides tools to manipulate mmc device registers.
[Peter: drop uninstall, move to filesystem and flash utilities]
Signed-off-by: Sébastien Szymanski <sebastien.szymanski@armadeus.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the readme.txt for the raspberrypi board less misleading regarding the
kernel image file name.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix the google.protobuf check in an upstreamable way.
As suggested by Arnout, use an autoconf ac_cv_have_* variable
so we can pass it on the command line. This is generic behaviour
for a lot of autoconf internals, so it makes sense to do it this
way.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even if Blackfin GNU toolchain add prefix '_' to all symbols,
symbol prefix is not accepted in the link flag --version-script.
Don't append prefix in the symbols in the version script file.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, there are five packages which use 'subst' macro to change their version.
* Three of them (ebtables, icu, perl) use this macro "in place" :
EBTABLES_SITE = http://downloads.sourceforge.net/project/ebtables/ebtables/ebtables-$(subst .,-,$(EBTABLES_VERSION))
ICU_SOURCE = icu4c-$(subst .,_,$(ICU_VERSION))-src.tgz
PERL_CROSS_OLD_POD = perl$(subst .,,$(PERL_CROSS_BASE_VERSION))delta.pod
PERL_CROSS_NEW_POD = perl$(subst .,,$(PERL_VERSION))delta.pod
* Two of them (boost, libnss) use an additional variable :
BOOST_FILE_VERSION = $(subst .,_,$(BOOST_VERSION))
BOOST_SOURCE = boost_$(BOOST_FILE_VERSION).tar.bz2
LIBNSS_SITE_VERSION = $(subst .,_,$(LIBNSS_VERSION))
LIBNSS_SITE = https://ftp.mozilla.org/pub/mozilla.org/security/nss/releases/NSS_$(LIBNSS_SITE_VERSION)_RTM/src
* Additionally two packages (duma, rings) doesn't use it at all :
DUMA_VERSION = 2_5_15
DUMA_SITE = http://downloads.sourceforge.net/project/duma/duma/2.5.15
RINGS_VERSION_MAJOR = 1.3.0
RINGS_SUBDIR = rings-v_1_3_0
This commit makes changes to use 'subst' macro "in place", in all of them.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
warning: (BR2_INIT_SYSV) selects BR2_PACKAGE_SYSVINIT which has unmet direct
dependencies (BR2_PACKAGE_BUSYBOX_SHOW_OTHERS && BR2_INIT_SYSV)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to prevent sysvinit and systemd to be selected at the same
time, sysvinit can now only be selected if SysV is chosen as init
system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Peter has just pointed me to the PGP signatures of the release tarballs,
which exist since he's been doing releases.
This was not obvious to me that the releases were signed, as there was
no info about it on the website.
So, add such links on the downloads page.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: some cleanups and rephrasing]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch introduces the luainterpreter virtual package, which
is provided either by 'lua' or by 'lua-jit'.
Packages that require a Lua interpreter can then depend on
BR2_PACKAGE_LUAINTERPRETER (in their Config.in) and luainterpreter
(in their .mk).
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[yann.morin.1998@free.fr: switch to package-defined providers,
apply Thomas' comments]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch only add the native cwiid library and a couple of tools.
The 2 first cwiid patches are retrieved from upstream and fix build
issues, so does the 3rd one.
The 4th patch allows to disable wmgui build, so allows to reduce to
number of dependencies.
Cc: Eric Jarrige <eric.jarrige@armadeus.org>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
This package has been renamed upstream to libllcp. Also, the current
package we have in Buildroot fails to compile due to a version bump of
it's main dependence, libnfc. A version bump is required because this
package has been adapted upstream to work with libnfc-1.7.0-rc6.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update the tcpreplay package to version 4.0.0. The upstream package has
a new maintainer and license. Version 4.0.0 brings a number of new
features see http://tcpreplay.appneta.com/ for details.
[Peter: drop autoreconf]
Signed-off-by: Chris Packham <judge.packham@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on the original new pkg patch submitted last Jan
and is part of the "Patchwork oldest patches cleanup #5". It combines
the original "[1/2]/[2/2] new package: python-posix_ipc" patch files.
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
CA certificates used for SSL based applications. The package installs CA
certificates to /usr/share/ca-certificates and creates symbolic links under
/etc/ssl/certs. For example, the existing libcurl package will use these
certificates for https urls. Based on the debian ca-certifcates package.
[Peter: fixup comments as pointed out by Yann]
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since default configure options for host packages include
--disable-static, gcc was not configured to build static version of its
libraries (libgcc.a, libstdc++.a, ...).
This patch replace --disable-static by --enable-static in configure
command. Notice some options was removed sinces they was ignored by gcc
configure script.
Once it was compiled, this commit takes care to copy static libraries to
$STAGING
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Tested-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
First switch the architecture availability to positive logic since it's
cleaner and avoids issues when new ones are introduced.
Then look at the source for the available ones at sysdeps/linux-gnu/...
aarch64 -> NULL
arc -> NULL
arm -> hardcoded to little endian, so no armeb
avr32 -> NULL
blackfin -> NULL
microblaze -> NULL
mips -> little/big endian handled but not for 64 bits
nios2 -> NULL
ppc -> OK
sh -> NULL
sparc -> OK
x86 -> Both i386 and x86_64 handled
xtensa -> NULL
Fixes:
http://autobuild.buildroot.net/results/cd2/cd24e7b6f863ab413d76ca7a81bd357ddf1dc4f7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Trace and replay OpenGL and OpenGL ES APIs calls to/from a file.
http://apitrace.github.io/
[Peter: fix Config.in, depend on glibc, use github helper]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dtc package has hardcoded shared lib link options in the Makefile, so it
will fail if you try to build it on a static lib environment.
[Peter: Move comment under _PROGRAMS suboption for proper indentation]
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openssl 1.0.1f Makefile.org doesn't quote $(CC) when passing the
parameter in another invocation of make, hence breaking when the
compiler string contains a space with multiple strings (for example with
ccache).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
A custom skeleton may include /etc/issue and/or /etc/hostname, in
which case we do not want to override them.
But those files could also be missing from the custom skeleton, or
the user may want to override their content.
Update the documentation to make it clear that the user can set these to the
empty string to make buildroot not create/overwrite these files.
[Peter: drop the different default values depending on skeleton]
Signed-off-by: Sagaert Johan <sagaert.johan@skynet.be>
[yann.morin.1998@free.fr: change from hiding it behind SKELETON_DEFAULT
to use conditional default values; move below the skeleton choice;
improve help entries]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to keep better track of when a feature got deprecated, and hence
when it can be removed, a new set of symbols BR2_DEPRECATED_SINCE_xxxx_xx is
introduced. These symbols are automatically selected when BR2_DEPRECATED is
selected, and thus are transparent to the user.
A deprecated feature will no longer depend on BR2_DEPRECATED directly, but
rather on the appropriate BR2_DEPRECATED_SINCE_xxxx_xx. If that symbol does
not yet exist, it has to be created in Config.in.
When removing a deprecated feature, one should also check whether this was
the last feature using the BR2_DEPRECATED_SINCE_xxxx_xx symbol, in which
case the latter can be removed from Config.in.
A followup patch will make sure the overview is added to the list of
deprecated features in the manual, so that a buildroot core developer can
easily determine which features to remove in a given development cycle.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To test for the google.protobuf presence, ola's ./conifgure runs the
host Python. This is doomed to fail, as google.protobuf is installed
in target/ and not in host/
Since our dependencies ensures that google.protobuf is indeed installed
before we attempt to configure and build ola, we can just ditch the
test altogether.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to install a default localtime.
since tzdata only makes sense for (e)glibc, we don't care
that we install timezone files that uClibc can't understand.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In our wrapper, we forcibly add the -march=, -mcpu= and-mtune= flags
to the actual compiler, this in an attempt to always generate correct
and optimised code for the target.
But in some cases, the caller knows better than we do, and passes its
own set, or subset of those flags. In this case, some may conflict with
the ones we pass. The most prominent offender being the Linux kernel.
For example, on the ARM Raspberry Pi, the Linux kernel will set the
-march=armv6 flag and no -mcpu= flag, but we pass -mcpu=arm1176jzf-s,
which conflicts:
drivers/scsi/scsi_trace.c:1:0: warning: switch -mcpu=arm1176jzf-s
conflicts with -march=armv6 switch
(and so for all the files the kernel compiles, pretty messy)
(note: arm1176jzf-s is not an armv6, it is an armv6zk. Yeah...)
To avoid this situation, we scan our commandline for any occurence of
the possibly conflicting flags. If none is found, then we add our owns.
If any is found, then we don't add any of our owns.
The idea behind this is that we trust the caller to know better than
we do what it is doing. Since the biggest, and sole so far, offender
is the Linux kernel, then this is a rather safe bet.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If either dhclient or dhcpcd are selected, network-manager is now
configured with the proper paths.
This allows 'dhcp=dhclient' or 'dhcp=dhcpcd' to be set in
/etc/NetworkManager/NetworkManager.conf.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNU/Linux distributions usually install dhcpcd in /usr/sbin.
NetworkManager will look for it in this directory.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Backport a patch from upstream to fix a conflict between glibc
headers and recent kernel headers (v3.10 or newer).
Signed-off-by: Anton Blanchard <anton@samba.org>
Acked-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: don't try to generate manpages even if host has asciidoc]
Signed-off-by: Andreas Naumann <anaumann@ultratronik.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The configure script / Makefile forgets to link with some of the dependent
libraries breaking static linking, so help it along.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove all patches needed for pre-autotools minidlna release
- convert .mk file to autotools-package
- disable broken static build
- compile-tested only with ffmpeg 1.2.4 (see other patch)
[Peter: fix license filename]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- remove patches applied upstream
thanks to Jerzy Grzegorek for the hint
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
cset 7a58a4e (e2fsprogs: bump to version 1.42.9) broke the generation
of ext4 filesystems.
This is because, in ext4, some metadata are dependent on the UUID.
If changing the UUID of an ext4 filesystem, tune2fs now exits with
exit-code 1, and prints a message to run fsck, to avoid trashing the
filesystem.
This condition is of utmost importance on a mounted filesysten (which
is not our case) to avoid corruption (yes, it is possible to change
the UUID of a mounted filesystem).
But the error is not valid for us, since we are working on an unmonted
filesystem image in the first place.
Since we change the UUID after we convert the filesystem (to ext4),
tune2fs just bails out.
We can not just ignore the exit code of tune2fs, since we still want
to catch any other failure.
It turns out that, changing the UUID before converting the filesystem
is just the way to go.
Fixes#6752.
Reported-by: Daniel Mentz <daniel@exxm.de>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Daniel Mentz <daniel@exxm.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Most of the dependencies listed were optional or only indirectly needed
(E.G. the xproto ones), so don't select them.
Further more, the optional xcomposite and xinerama dependencies were missing.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These have to be bumped together as new libxcb requires new xcb-proto, and
old libxcb doesn't build with new xcb-proto.
[Peter: fixup xcb-proto.pc instead of playing tricks with --define-variable]
Signed-off-by: Bernd Kuhls <berndkuhls@hotmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop some patches:
- glibc 2.17 and 2.18 are now supported by upstream
- coregrind/link_tool_exe_linux.in has been reworked and should now
support ccache
[Peter: drop unneeded AUTORECONF as configure.in no longer gets patched]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the manual uses the last modification date and time of
manual.txt in the generated manual.
This is confusing, especially for long-checked-out repositories where
the top-level manual.txt has not changed since the check out. Moreover,
the manual explicitly states 'generated on', which is confusing at best.
Use the current date and time instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.11 release of gpsd still hasn't materialised. For now, bump the Git
snapshot again, removing local patches that have now been merged upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Provides command line access to almost all the features defined in
the EWMH specification. It can be used, for example, to get
information about the window manager, to get a detailed list of
desktops and managed windows, to switch and resize desktops, to
make windows full-screen, always-above or sticky, and to activate,
close, move, resize, maximize and minimize them.
[Thomas:
- fixed license, which is GPLv2+, not GPLv2
- fixed wrapping of the Config.in help text
- removed Config.in comment related to MMU dependency.]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump the Git snapshot for the cppzmq package. The newer snapshot now
has a separate license file; update license information accordingly.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Apache licenses are referred to in a variety of ways; standardise these,
choosing a form which does not contain whitespace.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The default port 22 used by dropbear for its SSH connections is not always
desired. Dropbear accepts an option '-p' to set the port, but doing this was
not possible from the buildroot-provided init script.
One way to fix this is by adding a custom S50dropbear in a project-specific
rootfs overlay. However, this approach has the big disadvantage that bug
fixes or improvements in the default init script (i.e. in newer buildroot
releases) are not available (unless you manually port these changes each
time you upgrade buildroot).
Another solution is to modify the default init script from a
project-specific post-build script. However, this is fragile because you'd
have to sed some line but this line may change in later buildroot releases.
Yet another solution is to change the default port at build time, by
patching the options.h header file in the dropbear sources. This was
proposed with a patch [1] before, but not accepted.
This patch implements another solution, hinted from the discussion in [1]:
the default init script now sources a config file /etc/default/dropbear, in
which the user can set the variable DROPBEAR_ARGS. This is similar to the
S81named init script in the bind package. The config file would be added to
a project-specific rootfs overlay, a custom skeleton, or created from a
post-build script.
This approach has the advantage of being simple and non-intrusive, without
any code duplication or fragile script modifications.
[1] http://lists.busybox.net/pipermail/buildroot/2013-November/083165.html
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The iozone code uses the pthread_setaffinity_np() function, but with
uClibc this function is only available when the NPTL thread
implementation is used. Some architectures, such as AVR32 and ARC do
not support the NPTL thread implementation, and therefore lack the
pthread_setaffinity_np() function.
This commit adds a patch that provides an empty implementation of
pthread_setaffinity_np() when we're using uClibc, but not with the
NPTL thread implementation. The reasoning is that there is a very high
chance that the few architectures that do not implement NPTL are
non-SMP architectures, and therefore setting the affinity is not very
useful.
In addition to this, this commit:
* Renames the existing patch to use a sequence number, in order to
guarantee a proper ordering when applying patches.
* Removes the Kconfig dependency on !uClibc 0.9.31, which was
introduced to prevent AVR32 from failing due to the
pthread_setaffinity_np(). This conditional is no longer necessary
due to the new patch, and the conditional was anyway not completely
working since it was not taking into account the case of external
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Xilinx Microblaze external toolchains that we had support for are
very old, and are causing a huge number of build issues. Thanks to
Spenser Gilliland, we now have support for Microblaze in the internal
toolchain backend, and the autobuilders have been using the internal
toolchain backend since then. Therefore, it's time to deprecate those
old and unusable external toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add Linaro ARM 2013.10 and Linaro ARM 2013.11, and remove Linaro ARM
2013.07 and Linaro ARM 2013.08.
The main change for those versions is the switch to eglibc 2.18.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds the support for the recently release Sourcery MIPS
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery MIPS 2012.03 toolchain.
While we're at it, also fix the incorrect help text related to the
MIPS64 multilib selection.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When Grub is built with splashscreen support, copy the splashscreen
image to the ISO9660 filesystem. Otherwise, disable the splashscreen
in the grub menu.lst file.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When one enables the generation of a cpio archive of the root
filesystem, the most likely usage is as an initramfs for the
kernel. This commit ensures that the kernel has initramfs support when
the rootfs cpio image format is chosen.
This will for example ensure that if the user selects the ISO9660
filesystem format (which uses a cpio initramfs), the kernel will have
proper support to load and use the initramfs.
It is worth mentionning that when BR2_TARGET_ROOTFS_INITRAMFS is
enabled, then BR2_TARGET_ROOTFS_CPIO is always enabled. That's why we
move the enabling of CONFIG_BLK_DEV_INITRD from the initramfs case to
the cpio case.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
This commit adds the support for the recently release Sourcery ARM
2013.11 toolchain (gcc 4.8, gdb 7.6, glibc 2.18), and consequently
removes the support for the Sourcery ARM 2011.09 toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
When using initramfs built into the kernel, it is useless to put an
initrd in the iso image. This patch makes the image to only contain
the kernel image, and also removes the initrd line from menu.lst
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the Xtensa architecture uses the "snapshot" version of
uClibc. This means that the build is not reproducible, since it will
pick whatever latest version of uClibc is available at the moment of
the build.
This commit replaces that by adding a special Xtensa version, which
points to a well-known Git commit. This is something we should
hopefully be able to remove once the uClibc people realize that doing
a 0.9.34 release would be useful.
Should probably fix:
http://autobuild.buildroot.org/results/5d6/5d6072a038acf894d832704e36c1d43f0254abf5/build-end.log
at least I wasn't able to reproduce the build problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[baruch: use a more recent uClibc version]
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
When BR2_TARGET_GRUB_SPLASH is enabled, we were passing
--enable-graphics, but when it was disabled, we were not doing
anything. However, in Grub, graphics support is enabled by default,
and you have to pass --disable-graphics to disable it.
Fix this by passing --enable-graphics or --disable-graphics as
appropriate.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The fs/iso9660 logic assumes that the Grub bootloader is
used. Therefore, it should make sure that Grub is configured with the
support for the ISO9660 filesystem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In 1cece2813b (grub: add option to
configure the list of supported filesystems), we introduced the
BR2_TARGET_GRUB_FS_SUPPORT option which allows to provide a
space-separated list of filesystems that Grub should support.
However, it turns out that this not very practical, because the
iso9660 filesystem logic in Buildroot should force the ISO9660 support
to be enabled in Grub, which is not easy to do with a string option.
Therefore, this patch changes this option from a string option to a
list of boolean option, one per filesystem supported.
A few useful details:
- Since Grub legacy is dead, the list of filesystem, and therefore
the number of options, will not grow.
- We have only added options for filesystems that are likely to be
used in an embedded Linux context. Filesystems such as VSTAfs,
Minix, UFS2 or FFS2 are not supported.
- There is no need to add some Config.in.legacy support for the
previous option, since it was added after Buildroot 2013.11, and
was therefore never part of an official Buildroot release.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
In preparation to a change to the configuration options of the
supported filesystem in Grub, enclose the network driver options in a
sub-menu.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
The ISO9660-specific Grub menu.lst contains two entries: one entry to
chainload the bootloader available in the first hard drive, and
another entry to boot the Buildroot system.
However, it defaults to booting the first entry, i.e chainloading
what's on the first hard drive. For a Buildroot generated system, this
is quite odd: we're not even booting the system built by Buildroot.
So, switch the two entries, and put the Buildroot boot entry first.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
PDF files can not be easily embedded in other documents (eg. ODT, or HTML).
Add support for generating PNG graphs, by setting the GRAPH_OUT=pdf|png on
the command line:
make GRAPH_OUT=png graph-build graph-depends
The default is still to generate PDF graphs.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the graph of the complete dependency tree by calling:
make graph-depends
It's also possible to generate the graph-depends for a single package:
make PKG-graph-depends
The graphs are generated in $(O)/graphs/
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Generate the build-time graphs by calling:
make graph-build
This generates the graphs in $(O)/graphs/
It is possible to use the alternate color-scheme by setting the variable
GRAPH_ALT=1 on the command line:
make GRAPH_ALT=1 graph-build
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This script generates graphs of packages build time, from the timing
data generated by Buildroot in the $(O)/build-time.log file.
Example usage:
./support/scripts/graph-build-time \
--type=histogram --input=$(O)/build-time.log --output=foobar.pdf
Three graph types are available :
* histogram, which creates an histogram of the build time for each
package, decomposed by each step (extract, patch, configure,
etc.). The order in which the packages are shown is
configurable: by package name, by build order, or by duration
order. See the --order option.
* pie-packages, which creates a pie chart of the build time of
each package (without decomposition in steps). Packages that
contributed to less than 1% of the overall build time are all
grouped together in an "Other" entry.
* pie-steps, which creates a pie chart of the time spent globally
on each step (extract, patch, configure, etc...)
The default is to generate an histogram ordered by package name.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[yann.morin.1998@free.fr: adapt to the format of the step-hooks build-time.log,
add sort order by name, default to name-ordered histogram, use our colours
for pie-charts, add alternate color-scheme, add short-options, add
--input/-i]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- use the autotools-package infrastructure, since the package uses an
autoconf configure script.
- remove uninstall and clean commands since those are no longer
supported by Buildroot.
- rewrap the help text.
- order alphabetically the package in package/Config.in]
Signed-off-by: Lucas De Marchi <lucas.de.marchi@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas:
- remove empty newline at the end of Config.in
- use lowercase for the package name in the comment header
- reword the comment explaining why autoreconf is needed
- add optional dependency on libftdi, which avrdude can use
- remove avrdude.conf.bak file from /etc]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch update the patch for kernel's kconfig to add remaining
'kernel' mention.
It also applies this patch to buildroot's kconfig.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since some time, we have removed the support to build a toolchain for
the target, and therefore the support for several development tools on
the target.
This commit deprecates a few additional development tools: m4, bison,
flex and gob2. For flex, we retain the ability to build libfl, we only
deprecated the ability to build the flex binary itself.
The original motivation for this patch is that m4 is causing build
issues in some configurations, but there isn't really much incentive
to fix this package for the target, since it is not really useful for
embedded Linux systems.
Bison, Flex and Gob2 are deprecated because they are reverse
dependencies of m4.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Changes snmp++v3.3.2
====================
- Fixed: Regression through [APP-19] which lead to too long timeouts
on systems with clock_gettime.
- Fixed: Restored missing files (CHANGES, READMEs) to distribution.
- Fixed: Fixed compilation error when using poll syscall.
- Fixed: Do not use _vscprintf as it is not portable, instead just
truncate the log message.
- Fixed: Fixed test that produced an error during configure:
checking which _XOPEN_SOURCE macro must be defined...
./configure: line 6229: test: : integer expression expected
- Fixed: msec.cpp: timezone is a struct and not a class.
Changes snmp++v3.3.1
====================
- Fixed: Replaced strcasecmp usage in consoleExamples by _stricmp
for WIN32 platform.
- Improved: Debug output buffer length is now computed exactly on
WIN32.
- Fixed: Compilation of IPv6Utility.h with Visual Studio 2013.
- Fixed: Removed #define of Uint32 in eventlistholder.h.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the ARM Config.in logic specifies values for
--with-arch/-march and --with-tune/-mtune, but not for
--with-cpu/-mcpu. However, this causes problems on ARMv4, because
specifying --with-arch=armv4t isn't enough to make gcc generate ARMv4
code: one should also pass --with-cpu=<some ARMv4 CPU>.
Moreover, since Buildroot is generally designed to generate code
specifically for the configured target, it makes sense to give our own
--with-cpu/-mcpu value instead of relying on the default value used by
gcc, and only do small optimizations with -mtune.
Reported-by: Adam Hussein <kryme76@yahoo.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
aiccu uses the dn_skipname() function, which was only introduced in
uClibc 0.9.33. Therefore, we disable this package when uClibc 0.9.31
and 0.9.32. Most likely, only AVR32 users will be affected by this, so
we don't add a specific kconfig comment for that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
The old and new URLs are equivalent, but the new URL is not specific
to an older version of libmpd, which seems more logical.
[Thomas: update commit log.]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Also switch to github helper and install sample configuration file mode
600 - o+r is really bad for password-bearing configuration files.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Currently, the license files for the many firmware files are installed
in the target, alongside the firmware files, and are not available to the
legal-info infrastructture.
This patch separates the license files from the firmware files, and makes
them available to the legal-info infrastructure, so they get installed
with all the other license files.
Since most firmware files are proprietary (at least those we currently
install), we just have a single license definition. When we later support
other firmwares that have an OSS license, those can add their own
licensing information on a case-by-case basis.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Bump to the latest /stable/ linux 3.10.y for the Raspberry Pi defconfig.
Brings in quite a few bug-fixes (now based on 3.10.25), and a few
(minor) improvements (add DAC support).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The fio program uses posix_madvise(). However, posix_madvise() is only
available in the Git tree of uClibc, and in Buildroot's version of
uClibc 0.9.33, thanks to the huge number of backported patches that we
carry.
Therefore, trying to build fio with an external uClibc toolchain is
most likely going to fail (as the uClibc version is most likely an
official stable release, and no stable release of uClibc ever had the
support for posix_madvise()). And similarly, building fio with uClibc
0.9.31 and 0.9.32 is always going to fail. We disable those use cases
to avoid repeated autobuilder failures.
No kconfig comment has been added, because we don't have a
well-defined way of specifying such exceptions.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It seems weird that the libegl package has to know all of the packages
that may provide the EGL implementation.
This also breaks implementation provided by packages in BR2_EXTERNAL,
since we can't easily depend on the order of packages before we can
derive the dependencies of libegl.
So, Arnout and I separately came up to the same conclusion: move the
dependency selection from out of libegl, and into each of the packages
that provides an EGL implementation. Here it is.
Since we no longer depend on the order packages are included, but on
values set at Kconfig-time, we can now have EGL providers in BR2_EXTERNAL.
Reported-by: David Corvoysier <david.corvoysier@orange.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
There are places in Qt's source where headers included with the name of
the module subdirectory (e.g. #include <QtCore/QHash>). Therefore, the
build system passes the top header directory to the compiler; but this
results in a error when building host tools since sysroot/usr/include
directory includes architecture specific system headers.
In order to prevent this, install all Qt headers into a subdirectory in
/usr/include.
Fixes: http://autobuild.buildroot.net/results/4f1/4f16c0b38bdd6e40efcc781c12fae81c0bfabb72/
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The following patch enables the generation of static libraries
additionally to the shared ones for the netsnmp package.
[Thomas: fixed commit log.]
Signed-off-by: Andreas Ehmanns <universeii@gmx.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Updating the documentation to reflect that multiple directories can
now be specified for BR2_GLOBAL_PATCH_DIR. Along with giving an
example use case of how to use multiple global patch directories.
[Thomas: fix minor typo mentionned by Thomas De Schampheleire.]
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: add largefile and thread dependencies, bump to version 2.1.4,
use upstream Git instead of Debian tarballs, adjust license
information]
Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
In the Config.in file of package foo, it often happens that there are other
symbols besides BR2_PACKAGE_FOO. Typically, these symbols only make sense
when foo itself is enabled. There are two ways to express this: with
depends on BR2_PACKAGE_FOO
in each extra symbol, or with
if BR2_PACKAGE_FOO
...
endif
around the entire set of extra symbols.
The if/endif approach avoids the repetition of 'depends on' statements on
multiple symbols, so this is clearly preferred. But even when there is only
one extra symbol, if/endif is a more logical choice:
- it is future-proof for when extra symbols are added
- it allows to have just one strategy instead of two (less confusion)
This patch modifies the Config.in files accordingly.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes since 2.6.16:
* [FIX] redis-cli: fix big keys search when the key no longer exist.
* [FIX] Allow AUTH / PING when disconnected from slave with serve-stale-data on.
* [FIX] redis-benchmark: update help for new __rand_int__ form.
* [FIX] Fix broken rdbWriteRaw() return value check in rdb.c (harmless).
* [FIX] Log to what master a slave is going to connect to.
* [FIX] Only run the fast active expire cycle if master & enabled.
* [FIX] Fixed a replication bug involving 32 bit instances and big datasets
hard to compress that resulted into more than 2GB of RDB file sent.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The pycrypto package contains a LICENSE.orig file, but apply-patches.sh
removes all .orig file, so we can't list a .orig file asa license file,
as it would have disapeared by the time 'make legal-info' sould be called.
Add a post-extract hook that renames this license file, so it is renamed
just before we apply patches and remove .orig files.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
New for 3.4 series:
* SSL Server Certificate Validator
* Multicast DNS
* Transaction Annotations
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a check for BR2_PACKAGE_ELFUTILS; if this is enabled, then try to link
against libelf from the elfutils package. This allows ktap to resolve
symbols in userspace.
The new FFI functionality in ktap is not exposed, as it currently only
supports x86_64...
Signed-off-by: Anders Darander <anders@chargestorm.se>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch adds support for MIPS64 BigEndian platforms and has already
been merged upstream:
cea101bd10
Now we can remove the restriction on the Config.in to disable the
selection of this packages on MIPS64 BigEndian platforms.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5webkit is not currently supported on MIPS64 platforms, so disable the
possibility of selecting this package in that platform.
In the future the following changes would be needed to fix this problem:
A new Source/JavaScriptCore/assembler/MacroAssemblerMIPS64.h file needs
to be created in order to add support for MIPS64 and MacroAssembler.h
needs to be modified to include that file in case of CPU(MIPS64).
Also Source/WTF/wtf/Platform.h and Source/WTF/wtf/dtoa/utils.h need to
be modified to add MIPS64 support.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes since v1.8.5.1:
* "git diff -- ':(icase)makefile'" was unnecessarily rejected at the
command line parser.
* "git cat-file --batch-check=ok" did not check the existence of
the named object.
* "git am --abort" sometimes complained about not being able to write
a tree with an 0{40} object in it.
* Two processes creating loose objects at the same time could have
failed unnecessarily when the name of their new objects started
with the same byte value, due to a race condition.
Also contains typofixes, documentation updates and trivial code clean-ups.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using ld may cause a link failure due to using the default emulation
linker which is configured when building the linker in binutils. Using
gcc instead will pass the appropriate -m value because the compiler
knows the ABI you are using.
Here is an example of the failure:
ld: .libs/libdirectfbwm_sawman.a.tmp/sawman_wm.o: ABI is incompatible
with that of the selected emulation
ld: failed to merge target specific data of file
.libs/libdirectfbwm_sawman.a.tmp/sawman_wm.o
ld: Attempt to do relocatable link with elf64-tradbigmips input and
elf32-tradbigmips output
ld: .libs/libdirectfbwm_sawman.a.tmp/sawman_wm.o: file class ELFCLASS64
incompatible with ELFCLASS32
ld: final link failed: File in wrong format
Fixes:
http://autobuild.buildroot.net/results/e4b/e4b77681a44626efa2a44627604630697e785086/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-Merge the current blackbox-0.70.1-configure.patch to a new one named
blackbox-001-Fix-configure-ac.patch that will patch configure.ac instead
and also will add -lpthreads to LIBS to fix a linkage problem.
-Force autoreconf to generate the new configure script using the new
patched configure.ac file.
Fixes:
http://autobuild.buildroot.net/results/a97/a979cc079706be2012fb4b6c72894aca636adfb6/
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes building on mipsel possible (hard-float variant only).
[Peter: also adjust dependenciess for comment]
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, the package would overwrite busybox' binaries even
if Busybox was set in the config as the default init system.
Signed-Off-By: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add /dev/hvc* devices, and add them to securetty. These
are required for ppc64 virtual consoles.
Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Certain tracing related options are required to be able to build ktapvm.ko, enable those.
Enable CONFIG_FUNTCTION_TRACER as otherwise, CONFIG_EVENT_TRACING won't stick. (Some
tracer needs to be enabled for this).
[Peter: add a note to ktap Config.in explaining this is done]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpcap would fail to initialize on Linux when compiled against kernel
headers with TPACKET_V3 support but running on kernel without:
"can't get TPACKET_V3 header len on packet socket: Invalid argument"
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
E.G. for toolchain-buildroot / toolchain-external. Now these packages are
correctly handled by make source / external-deps.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The source-check / external-deps make targets ends up calling recursively
into buildroot's Makefile, causing make to display a warning:
make[2]: warning: -jN forced in submake: disabling jobserver mode.
We don't support toplevel parallel make, so get rid of the warning using
MAKE1 instead.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is no perf_events support in the kernel for avr32. The oprofile
package makefile hard codes the list of binaries to install. Unfortunately,
this hard-coded list contains pe_profiling/operf, which is only built when
perf_events support is available.
Fixes autobuild failures such as the following.
http://autobuild.buildroot.net/results/492/492659bc252395a62e62e6005ed0e86e582dcada/
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also remove a local patch which has now been accepted upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments of packages that need a Linux kernel to be
built by buildroot, to the format:
foo needs a Linux kernel to be built
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the python packing a bit easier to use by providing a detailed error
message if <pkg>_SETUP_TYPE isn't set to a valid value.
At the same time adjust the error message used when <pkg>_SETUP_TIME isn't
set to list the exact variable name that should be set, and don't talk about
'Unknown' as it isn't printed when the variable isn't set (or is set to the
empty string).
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: convert to the Python package infrastructure, added missing
dependency on C++, inherited from msgpack.]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Thomas: converted to the Python package infrastructure, added missing
libusb dependency in the .mk file, added missing newline in the
Config.in file, fix the package description]
Signed-off-by: Wojciech M. Zabolotny <wzab01@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove the select of BR2_PACKAGE_PYTHON_SETUPTOOLS, since what is
really needed is host-setuptools (as can be seen from the original .mk
file), and not setuptools for the target.
Also, remove the mangling of the Python shebang, since it's now done
by passing the --executable= option at install time (done in the
Python package infrastructure).
Finally, convert the package to use <pkg>_INSTALL_INIT_SYSV.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also, remove the "select BR2_PACKAGE_PYTHON_SETUPTOOLS", since
setuptools is a host dependency (needed to built the package), not a
target dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Erlang builds two emulators depending on whether SMP is supported or
not. If it is known that the target does not support SMP, turning off
the SMP emulator saves compile time and reduces the size of the
installation.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building for avr32, the build fails as follows.
cc1: error: unrecognized command line option "-Wno-packed-bitfield-compat"
An example of an autobuild failure arising from this is the following.
http://autobuild.buildroot.net/results/92e/92e472004812a3616f62d766a9ea07a997a66e89/
Clearly, not all toolchains provide a gcc that understands
the -Wno-packed-bitfield-compat flag; remove usage of this flag.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bumps gets us:
- support for the v4l2 driver
- fix latencies in vdec3 (h264 decoder)
- fix incorrect frame presentation in de-interlacing filter
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Useful for for-build scripts to call parted, eg. to generate
partition tables and such automatically.
Since the primary goal is to use parted within scripts, we
do not need readline, so it is forcibly disabled.
Also, it does look unlikely that we need to manipulate LVM
volumes, so we forcibly disable support for the device-mapper.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
parted can be configured without support for LVM volumes, so
we can relax the dependency on lvm2, and make it an optional
feature.
Remove now no-longer needed dependency on MMU because of lvm2.
(Based on a code-snippet from Thomas.)
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the ChangeLog, spice needs glib2 since 0.12.2.
Thus add libglib2 dependency to fix build error if !BR2_PACKAGE_LIBGLIB2.
Also add a patch to fix trivial build error.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some boards are configured in u-boot to store multiple redundant copies of
the environment image in flash. For these boards, it is required to pass
the -r flag, when generating a boot environment image using mkenvimage.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add an option to enable support for sending debug messages
to syslog instead of stdout.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 3.11 release of gpsd is imminent; in the meantime, backport some patches
from upstream to fix some of the autobuild failures.
Also bump to the most recent Git snapshot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libglib2 can fail to build for arm, with the following error.
gatomic.c:668:2: error: #error G_ATOMIC_LOCK_FREE defined, but incapable of lock-free atomics.
The following upstream commit fixes the problem.
commit 996edb0c46356d8a326f886b91a77a6af9a2de3e
Author: Antoine Jacoutot <antoine@mtier.org>
Date: Wed Aug 28 09:35:27 2013 +0200
fix atomic ops detection
AC_TRY_LINK should be used instead of AC_TRY_COMPILE because the code
will compile everywhere, either producing ``atomic'' code, or an
external reference to __sync_bool_compare_and_swap.
https://bugzilla.gnome.org/show_bug.cgi?id=706958
The upstream commit went into version 2.37.7, so this is the lowest version
that we can bump to, in order to fix the atomic operations problem. However,
2.37.x is a development version, so we bump to 2.38.2 instead.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upgrade to latest stable release.
Release 0.24.4
core:
* Fix regression in broken endstream detection. Bug #70854
* Catalog: sort entries of NameTrees to make sure lookup works. Bug #26049
* Don't infinite loop if reading from GooFile::read fails. Bug #71835
utils:
* pdftotext: Do not close stdout. Bug #71639
* pdftotext: Silence warning for may be used uninitialized variable. Bug #71640
* pdftotext: Escape the text of the xml headers
* Warn the user if he provides a wrong range
qt4:
* Fix typo in xml API. Bug #71643
qt5:
* Fix typo in xml API. Bug #71643
Release 0.24.3
core:
* PSOutputDev: Fix PFB font embedding. Bug #69717
* CairoOutputDev: Do not set an invalid matrix in drawImage(). Bug #70085
qt4:
* Don't crash if getXRef()->copy() fails
qt5:
* Don't crash if getXRef()->copy() fails
utils:
* pdfseparate: Allow only one %d in the filename. Bug #69434
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For some reason, the dialog package has a DIALOG_POST_CLEAN variable,
which doesn't match any of the variables understood by the
infrastructure. This commit gets rid of it.
This was noticed while reviewing the packaging of python-dialog.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
To make it clear to the user that these options are external to Buildroot
and no support is provided by the Buildroot community.
With this, there's no need to recommend people to their options inside
a menu, so remove that from the documentation.
Kconfig nicely allows us to hide the menu completely if BR2_EXTERNAL isn't
used, so make use of that to not confuse people. It would be nice if we
could add some help text to explain the BR2_EXTERNAL stuff as well, but
that isn't supported on menus :/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows the BR2_EXTERNAL directory to contain Config.in and
Makefile code, which gets integrated into the Buildroot build logic:
- Buildroot automatically includes the $BR2_EXTERNAL/Config.in in the
top-level configuration menu.
- Buildroot automatically includes the BR2_EXTERNAL/external.mk in
the build logic, so it can for example be used to include other .mk
files that define package recipes.
This is typically intended to be used to create target packages in the
BR2_EXTERNAL directory, but can also be used for bootloaders, host
packages, or other custom make logic.
We also add a dummy Config.in file in support/dummy-external/ to
ensure that the source "$BR2_EXTERNAL/Config.in" line will point to an
existing file even when BR2_EXTERNAL is not used by the user.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces the BR2_EXTERNAL environment variable, which
will allow to keep Buildroot customization (board-specific
configuration files or root filesystem overlays, package Config.in and
makefiles, as well as defconfigs) outside of the Buildroot tree.
This commit only introduces the variable itself, and ensures that it
is available within Config.in options. This allows us to use
$BR2_EXTERNAL in a 'source' statement in Config.in.
Following patches extend the usage of BR2_EXTERNAL to other areas
(packages and defconfigs).
In details, this commit:
* Introduces the BR2_EXTERNAL Kconfig option. This option has no
prompt, and is therefore not visible to the user and also not
stored in the .config file. It is automatically set to the value of
the BR2_EXTERNAL environment variable. The only purpose of this
BR2_EXTERNAL Kconfig option is to allow $BR2_EXTERNAL to be
properly expanded when used inside Kconfig source statements.
* Calculates the BR2_EXTERNAL value to use. If passed on the command
line, then this value is taken in priority, and saved to a
.br-external hidden file in the output directory. If not passed on
the command line, then we read the .br-external file from the
output directory. This allows the user to not pass the BR2_EXTERNAL
value at each make invocation. If no BR2_EXTERNAL value is passed,
we define it to support/dummy-external, so that the kconfig code
finds an existing $(BR2_EXTERNAL)/package/Config.in file to
include.
* Passes the BR2_EXTERNAL into the *config environment, so that its
value is found when parsing/evaluating Config.in files and .config
values.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Tested-by: "Samuel Martin" <s.martin49@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes an issue that occurs during the manual build process
which will occur when BR2_EXTERNAL is introduced.
During the package list generation, the python script using kconfiglib
module reads and parses the Config.in files. So, symbols, including
environment variables, got expanded and/or resolved. In
kconfiglib.py, this patch fixes the regex that did not allow to use
numbers in the environment variable names, so '$BR2_EXTERNAL' got
wrongly expanded like it was '${BR}2_EXTERNAL':
<snip>
>>> Updating the manual lists...
Traceback (most recent call last):
File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 375, in <module>
buildroot = Buildroot()
File "/opt/buildroot/master/support/scripts/gen-manual-lists.py", line 216, in __init__
self.root_config))
File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 214, in __init__
self.top_block = self._parse_file(filename, None, None, None)
File "/opt/src/buildroot/master/support/scripts/kconfiglib.py", line 919, in _parse_file
return self._parse_block(line_feeder, None, parent, deps, visible_if_deps, res)
File "/opt/buildroot/master/support/scripts/kconfiglib.py", line 1114, in _parse_block
self.base_dir))
IOError: /opt/buildroot/master/Config.in:490: sourced file "$BR2_EXTERNAL/Config.in" (expands to
"2_EXTERNAL/Config.in") not found. Perhaps base_dir
(argument to Config.__init__(), currently
"/opt/buildroot/master") is set to the wrong value.
docs/manual/manual.mk:2: recipe for target 'manual-update-lists' failed
make: *** [manual-update-lists] Error 1
</snip>
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently there are two different names of the minor version variable:
<PKG>_MINOR_VERSION and <PKG>_VERSION_MINOR
This patch unifies them to <PKG>_VERSION_MINOR
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently there are two different names of the major version variable:
<PKG>_MAJOR_VERSION and <PKG>_VERSION_MAJOR
This patch unifies them to <PKG>_VERSION_MAJOR
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
[Peter: Propagate dialog dependencies, show comment if not available]
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Switch away from the PyPI subset version since it has a great filename
clash with the full upstream apache version.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The C code (fastbinary.so) wasn't built using the cross compiler, hence
it was unusable. Fix it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like for binutils, gdb versions pulled from Git want to
regenerate their documentation, and none of the MAKEINFO tricks we've
tried worked properly, so we're simply adding host-texinfo as a
dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the binutils source code is pulled from a Git repository, a
number of generated files are not present, and need to be
re-generated. Those files are generated by flex, bison, and texinfo,
so we need to pull the corresponding dependencies.
Notice that we tried avoiding the texinfo dependency by doing a number
of MAKEINFO tricks, but none of them worked properly, so we've instead
chosen to depend on host-texinfo.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit allows to build an internal toolchain for the Microblaze
architecture, with either glibc or eglibc.
Note that we add an explicit list of architectures that are supported
by uClibc, and Microblaze is not part of them, because it currently
doesn't build for this architecture.
[Thomas: add better commit log, add architecture dependencies on
uClibc, to avoid selecting uClibc on Microblaze]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to make it easier to cope with changes in github download-URL's,
this patch introduces the github helper function. It generates the site
URL of a github repository. It's usage is $(call github,user,pkg,version).
[Thomas: extracted from Mischa original commit, macro moved to
pkg-download.mk]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The patch "pandaboard: Fix defconfig build" locked the
default pandaboard kernel to 3.8.11. This is inconvenient,
since the boot process has changed since kernel > 3.8.
Update the default kernel to 3.12.2 and fix the boot image
configuration, but remain compatible with legacy U-Boot
versions by using appended flattened device tree uImage.
This change *should* keep future kernels compatible with a
fixed U-Boot version.
Note the default device tree is now for the pandaboard-ES,
so users of other board revisions will need to set the
correct DTS_NAME.
[Peter: use custom kernel headers version (3.12.2)]
Signed-off-by: Thomas Pedersen <thomas@cozybit.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The new 'stable' branch of the Raspberry Pi kernel is now based
on the Linux 3.10 branch (currently 3.10.22), so bump both the
kernel version for the toolchain headers, and for the target.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Python saves a pre-compiled support/scripts/kconfiglib.pyc file
side-to-side with the corresponding .py file.
This does not work if the Buildroot source tree is read-only (but
this is not an error for Python, which keep going OK).
But this may cause issues for out-of-tree builds in case the same
Buildroot source tree is shared by many builds.
Also, 'make clean' currently does not clean this file, and out-of-tree
builds can remove it either, at the risk of causing issues for other
out-of-tree builds running at the same time.
Just tell Python not to generate .pyc files:
- call the script via python, don't use the sha-bang
- thus, make the script non-executable, and remove the sha-bang
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream patch (28d708c44bc47b56f6551ff285f78edcf61c208a) added support for
make-4.0 or newer. We backport this patch to allow glibc to build on hosts
running the latest version of 'make'.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For gpsd 3.10, the ubx scons option has been renamed to ublox. Update our
makefile accordingly.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, openssl defines three conditional hooks, but two do not
follow our coding rules:
- for PRE_CONFIGURE, the hook is defined in the if-block, but
the _HOOK variable is always set
- for POST_INSTALL_TARGET, the hook is always defined, but the
_HOOK variable is set in the if-block
Fix that:
- define the hook in the if-block
- assign the _HOOK variable in the if-block
At the same time, get rid of extra empty lines that make it more
difficult to read.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
udev requires the epoll_create1 system call, which is not available on avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
LFTP is a sophisticated ftp/http client, and a file transfer program
supporting a number of network protocols. Like BASH, it has job
control and uses the readline library for input. It has bookmarks,
a built-in mirror command, and can transfer several files in parallel.
It was designed with reliability in mind.
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Matthew Weber, Grub doesn't build on 64 bits build
machines, because the host compiler produces 64 bits binaries by
default, while Grub should be built 32 bits. Therefore, this commit
passes -m32 to the Grub CFLAGS, so that 32 bits binaries are always
produced.
Reported-by: Matthew Weber <mlweber1@rockwellcollins.com>
Cc: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Matthew Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump to version 2013.62 with ECC support.
Switch the initscript to on-demand key generation and add systemd unit
file.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes typos in the 'encode_password' function calls.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Systemd service files don't need to be +x so switch the installation to
mode 644.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current stable release of Wireshark is 1.10.3. It supersedes all
previous releases. So let's upgrade to 1.10.3.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/73d736dd3c8a70358ef4b19a63dda46178cf8bf1/
Note that the propagation of the thread dependency to the oprofile
package is a little bit non standard, because oprofile selects libpfm4
only on the PowerPC architecture. So we ensure the thread dependency
is only enforced on PowerPC, and a separate comment is displayed when
thread support is not available, but the PowerPC architecture is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The alsa-utils configure script will use pkg-config if available,
so make sure that it is available.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since only one firmware is used to boot the Raspberry Pi, there is no
reason to install all of them.
Add an option to select what firmware to install.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current TOC level is set to 4, which does not mean 'a 4-level deep TOC',
but really means 'a TOC deep to the 4th level', with the first level being
level 0, which means we have:
12. Appendix
12.1. Makedev syntax documentation
12.2. Makeuser syntax documentation
12.3. Partition table layout description syntax
12.3.1. The global section
Properties for the global section
Which a bit too much. And yet, the fifth level is not shown, since we
don't have any! :-/
Limit the depth of the TOC to three levels, which is just enough to be
usefull, yet not cluttered by low-level titles.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some shell environments the EUID variable, which checks the
user id, is not defined. Use `id -u` instead.
This patch mutes the following error:
./board/cubietech/cubieboard/mkcubiecard.sh: 31: [: -ne: unexpected operator
Signed-off-by: Andi Shyti <andi@etezian.org>
Reviewed-by: Arvid Picciani <aep@exys.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install syslogd/klogd to /sbin instead of /usr/sbin to really win over
busybox and avoid the ugly noise when booting without busybox installed.
Also drop uninstall hook and manpage installation.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When busybox isn't installed symlink agetty->getty to make the default
inittab work.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install PAM configuration files for su (with "su -" variant) and login
when the tools are enabled.
This finally fixes bug #5366 and now we can login with an util-linux
/bin/login.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install default "other" configuration file that denies everything not
handled by other specific configurations.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set PERL=missing so as to avoid generating manpages with help2man that breaks
on many occasions (and it's pointless).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Notice that the license is quite special. It is basically MIT with the
difference that it only allows use for:
'research and educational purpose and without fee ... Use of this software
in whole or in parts for direct commercial advantage requires explicit
prior permission'
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the information from oracle website, version 5.3.21 is no longer
available for download. Let's upgrade to version 5.3.28.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* Add arpd support via the new berkeleydb compat option.
* Remove uninstall define.
* Install ifcfg if bash on the target is enabled.
* Misc cleanups.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add DB 1.85 compatibility layer option, it's needed for arpd in iproute2
and other old apps that haven't moved to the newer API.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Misc fixes and improvements all over the place, mostly fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes a few shortcomings in the boot firmware:
- emmc pll clock issues
- audio underruns and chirps
- unload of sensor drivers (?)
- missing config.txt no longer borks the boot
- lockups during long exposures on the camera
- YUV-to-texture fastpath for the camera
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
These instructions should probaby go in the Buildroot manual, but at
this point, it's not clear in which section they should go. So in
order to not loose those notes, add them to the Grub help text.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Grub can be configured to enable or disable the filesystems supported
in the stage 2. In addition, there are filesystem specific stage
1.5. In order to save space and build time, we provide a new option
that allows to give a space-separated list of filesystems that Grub
should support.
We default to support FAT and ext2, since most of the other
filesystems are fairly unlikely to be used.
We use this option to:
1) Pass --enable-<fs> or --disable-<fs>, which enables/disables the
support of <fs> in Grub stage 2.
2) Install only the stage 1.5 that correspond to the selected
filesystems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Make the splashimage line in menu.lst only active when splashimage
support has really been enabled in the Grub configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Two improvements to the menu.lst file:
* Do not enforce any video mode, let the kernel use whatever it wants
as the default, or let the user customize it when needed.
* Use /dev/sda1 instead of /dev/hda1. Nowadays, most hard disk
controllers are handled using libata, and therefore the disks are
visible as /dev/sd<X>.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit brings a number of improvements to the grub packaging:
* It builds grub with the host compiler, which is needed so that we
can build a 32 bits grub even if the target architecture is
x86-64. To make sure we have a host compiler capable of generating
32 bits code, grub now selects the BR2_HOSTARCH_NEEDS_IA32_COMPILER
option. Building with the host compiler is done by cheating and
passing $(HOST_CONFIGURE_OPTS) in GRUB_CONF_ENV.
* Some additional CFLAGS are added to make sure grub builds properly
with modern compilers (-O0, --build-id=none, -fno-stack-protector).
* Removal of the GRUB_INSTALL_STAGING_CMDS which were not used, since
GRUB_INSTALL_STAGING was not set to YES.
* Installation of the "grub" binary in $(HOST_DIR) instead of
$(TARGET_DIR) since it's actually used only on the host to install
grub into an image or device.
* Removal of the grub uninstall commands, since they are generally
considered useless.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds the OBJCOPY and RANLIB variables to
HOST_CONFIGURE_OPTS, since grub legacy will need these defined in
order to build properly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some bootloaders (such as Grub) need to be built for x86 (i.e IA32)
even if the target architecture is x86-64. However, when the target
architecture is x86-64, the cross-compiler generated by Buildroot is
not able to generate 32 bits code.
To solve this, we will rely on the host compiler being a x86 + x86-64
compiler. Therefore, this commit introduces the
BR2_HOSTARCH_NEEDS_IA32_COMPILER option, which tells the dependency
checking logic to verify that the host compiler is indeed capable of
building x86 32 bits code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dbus-python requires xml.parsers.expat, which is provided by the pyexpat
module. This patch enables the pyexpat module as a dependency when dbus-python
is selected.
[Peter: fixup whitespace]
Signed-off-by: Ivan Sergeev <vsergeev@kumunetworks.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This libtool change ensures that ld uses the right machine emulation file,
which will allow to fix several MIPS64 n64 link failures, such as the one
currently visible on the libiscsi package. Packages affected by this
problem will have to use <pkg>_AUTORECONF = YES to benefit from this libtool
fix, until they are fixed upstream.
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
qt5base fails to compile on MIPS64 BigEndian n64 platforms because there
are multiple calls to some functions that are disabled. Since every Qt5
package depends on qt5base we can disable Qt5 entirely. This is a quick
fix for the next release. In the meantime, a proposed patch to fix this
problem has already been sent to Qt:
https://bugreports.qt-project.org/browse/QTBUG-35228
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Acked-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For now, it doesn't use ccache when compiling host tools (e.g. qmake).
It seems the fix is not trivial.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Simplify our custom qmake.conf:
- Include linux_device_{pre,post}.conf to inherit common device
configuration.
- Do not add $(STAGING_DIR)/usr/include to include path. It is
redundant.
In additon to the simplification of code, this change is a preparation
to solve problems occurring when QMAKE_CXX is prepended with ccache path.
Upstream patch is needed by configure to parse device options correctly.
Another upstream patch is needed to remove ARM specific parts from
linux_device_post.conf.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Slim down the kernel config, switch to ext4 (with ext2/3 support),
enable N32 & O32 ABI compatibility for extra testing goodness and enable
keyboard & mouse support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
uClibc only works well for O32 ABI on mips64, so default to eglibc that
works just fine with N32 & N64 ABIs as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package selects BR2_PACKAGE_QT_SCRIPT which is not supported on
certain platforms. To prevent this behaviour we use the same solution as
we applied for BR2_PACKAGE_QT_SCRIPT
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BINDIR is used to point systemd/dbus service files to the correct binary
path where wpa_supplicant resides.
So define it to avoid the default /usr/local path that doesn't work.
Solves bug #6704
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_LVM2_DMSETUP_ONLY is a "negative" option that disables
build and install of part of the suite. This option cannot be unselected
by other config options, which gives a problem for BR2_PACKAGE_UDISKS_LVM2:
it needs BR2_PACKAGE_LVM2_APP_LIBRARY, which requires the full suite.
Therefore, replace the negative BR2_PACKAGE_LVM2_DMSETUP_ONLY by a positive
BR2_PACKAGE_LVM2_STANDARD_INSTALL. To make sure that existing defconfigs
keep working, the new option defaults to y unless the legacy
BR2_PACKAGE_LVM2_DMSETUP_ONLY was selected.
Fixes http://autobuild.buildroot.net/results/ea4627cae45e972ebba5b33a2b2871ce7f46fedc/
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We are carrying support for a couple of configuration options which
are no longer present in connman. Specifically:
; threads: vestigial configuration option needed for defunkt WiMAX plugin
; ntpd: plugin no longer present in connman
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The profiling support is not available on AArch64, causing build
failures such as:
http://autobuild.buildroot.net/results/724f8646e1c2c28cf187f2313244d1e3e61b4c25/
According to Will Newton, function profiling will only be added in the
next version of the AArch64 Linaro toolchain. This indicates it is a
rather new feature in AArch64, so for the moment, just disallow
profiling on AArch64. We can revise this later, when this feature has
been made available in Linaro toolchains, and official gcc releases
(for internal toolchain support).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply the latest Atmel patch for sam-ba version 2.12
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump connman to version 1.19; remove a local patch that is no longer
required, the code change having now been made upstream.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Uses fork() in apr_proc_fork() which is used by almost all the packages
that use apr (log4cxx, subversion).
apr-util doesn't use fork or apr_proc_fork but it's of no use alone.
[Peter: also hide log4cxx comment if !BR2_USE_MMU]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
pkg-autotools.mk already handles static/shared linking, so no need to
explictly force it. Worse even, the build fails with BR2_PREFER_STATIC_LINK
as we end up calling libtool with --static when it tries to link the .so,
breaking the build:
../ld: attempted static link of dynamic object
`../opcodes/.libs/libopcodes.so'
collect2: error: ld returned 1 exit status
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix a rare edge build failure when iconv is enabled, easily reproduced
in a debian chroot with an aarch64 external toolchain with iconv +
xmlrpc support enabled with a php cgi + cli target.
Should solve bug #6500.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Startup script fails to restart the service: 1s delay is enough to fix
this.
Also apply a minor fix of the script name in the usage string
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If glib2 is compiled with the system PCRE instead of the included
copy, then that system PCRE needs to have support for UTF-8 and
Unicode properties enabled. Otherwise you will get such warnings
at run-time:
GLib-CRITICAL **: PCRE library is compiled without UTF8 support
GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow to compile PCRE with UTF-8/16/32 support and with
support for Unicode properties.
[Peter: whitespace fix]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
mongoose fails to start because the options used are not supported by
mongoose. Fix it by using the correct option names instead.
[Peter: reworded commit text and use the correct long options instead]
Signed-off-by: Davide Viti <d.viti@infosolution.it>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
But not the octave development package:
checking for octave... octave
checking for mkoctfile... configure: error: mkoctfile is not installed
We don't need octace support, so fix it by explictly disabling it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Ships configure thus fixing the breakage from the automake bump
to version 1.14 with AUTORECONF, with the added bonus of being faster.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
beecrypt does not properly handle its dependency on openpm, so that
applications using libbeecrypt are not aware that they also need openmp
(libgomp). This causes error messages during linking, such as (rpm):
..-gcc [..] -lbeecrypt -lbz2 -lz -lpopt -lpthread
libbecrypt.so: undefined reference to `GOMP_sections_end_nowait'
libbecrypt.so: undefined reference to `GOMP_parallel_end'
libbecrypt.so: undefined reference to `GOMP_sections_next'
libbecrypt.so: undefined reference to `GOMP_parallel_sections_start'
Because the openpm dependency of beecrypt is only used by rsa.c, to
parallelize the calculation of RSA cyphers, we can simply disable openmp in
beecrypt instead of trying to fix the way -lgomp is passed.
Fixes http://autobuild.buildroot.net/results/bcf/bcff4b81bfbb1191f97317b0945c74d948c9774b/
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It seems pointless to disable even the default optimizations.
If at all this should be made dependant on the values of the
BR2_OPTIMIZE variables.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If glib2 is compiled with the system PCRE instead of the included
copy, then that system PCRE needs to have support for UTF-8 and
Unicode properties enabled. Otherwise you will get such warnings
at run-time:
GLib-CRITICAL **: PCRE library is compiled without UTF8 support
GLib-CRITICAL **: PCRE library is compiled without UTF8 properties support
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow to compile PCRE with UTF-8/16/32 support and with
support for Unicode properties.
[Peter: whitespace fix]
Signed-off-by: Sven Neumann <neumann@teufel.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Gets rid of a large number of warnings (and suboptimal code?):
..sysroot/usr/include/features.h:209:5: warning: #warning requested
reentrant code, but thread support was disabled [-Wcpp]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/bab/bab68bcf8714f215ac0b0c2546fa06608377fbb0/
This package is only supported on MIPS32 platforms. The mips-32.S file
included in the source code of this package only makes sense to be compiled
for MIPS32, and also contains hardcoded MIPS32 instructions which are
illegal on MIPS64. Trying to compile this package on a MIPS64 platform will
end with a linkage failure due to undefined references.
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The -Wno-unused-result option is not understood by the version of gcc used by the
avr32 toolchain. Remove the option from the compilation flags.
Fixes build failures such as the following.
http://autobuild.buildroot.net/results/e22/e22d94fca3eabb4e54d82af04319f17ad8e10c20/
The single existing patch for libroxml has been renamed to include a numerical
component for application order sorting. The existing patch has also been updated
to apply without fuzz.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
By default, the ola build uses -Werror, so let's pass
--disable-fatal-warnings to remove this and avoid build failures
caused by warnings.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Deprecate old MIPS ISAs since they are rarely used anymore and they cause
multiple build problems for new packages
Signed-off-by: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
lxc_checkpoint.c: In function ‘main’:
lxc_checkpoint.c:128: error: ‘O_LARGEFILE’ undeclared (first use in this function)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, if locale support was requested, vim would be built with NLS or
not depending on the build order. This patch now makes the dependency
explicit.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 924b8739da we no longer declare glibc and eglibc support as
experimental, so it shouldn't be mentioned in the help text anymore.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- fix download url : isn't available on previous ftp, use an other one
instead
- add version according to source code version
- rename and clean patch according to patch policy
[Peter: adjust upstream URL in Config.in]
Signed-off-by: Arnaud Aujon <arnaud.aujon@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Revamp initscripts see bug #3601
* Trim whitespace
* Check for installed binary (dhcp-relay)
* Check for installed config (dhcp-server)
* Check for proper variable setup from the script (both)
* Add "FAIL" message when startup fails (blind OK isn't accurate)
* Add start/stop messages to dhcp-relay
Switch bool to "dhcp (ISC)" to keep in line with package sorting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Rename patches for uClibc version 0.9.31, for consistency with the general
patch naming scheme in Buildroot. Also remove a .avr32 extension from a patch;
this is not necessary, since uclibc 0.9.31 is unavailable on architectures
other than avr32.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The legal-info utility functions where defined using two ways
util-foo = command-foo
and
define util-bar # parameter description
command-bar
endef
This commit changes these functions to use the second form for clarity and
additionally adds parameter descriptions on all functions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As far as I can tell enabling tcl support has no affect on the actual
library. Furthermore, wvstreams has been checking for/linking against
tcl 8.3 which has never been supported in buildroot as far as I can tell
(8.4 added in 2005). That being said there is clearly no reason to keep
this around.
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using ccache TARGET_CC is something like
ccache gcc
This causes problems in the pv build which attempts to
override LD because the command ends up being
make [...] LD=/tools/ccache /tools/gcc LDFLAGS="[...]
As a result, during the build phase it attempts to build
/tools/gcc which succeeds by doing nothing:
make[1]: Nothing to be done for `/tools/gcc'.
and during the install phase you get the real build which
errors out on the LD error this snippet was attempting to
fix:
ld -r -o src/library.o src/library/getopt.o \
src/library/gettext.o
ld: src/library/gettext.o: Relocations in generic ELF \
(EM: 40)
src/library/gettext.o: error adding symbols: File in \
wrong format
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Thomas Petazzoni, the uclibc 0.9.31 build fails for avr32:
In file included from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/kernel.h:4,
from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/netlink.h:4,
from /opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/rtnetlink.h:5,
from libc/inet/netlinkaccess.h:27,
from libc/inet/if_index.c:36:
/opt/br-avr32-full-2013.11-rc1/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/sysinfo.h:8: error: expected specifier-qualifier-list before '__kernel_long_t'
make[1]: *** [libc/inet/if_index.os] Error 1
make[1]: Leaving directory `/opt/toolchain-build/build/uclibc-0.9.31.1'
The problem is reported at:
https://lkml.org/lkml/2013/5/18/1
The offending kernel commit is:
http://git.kernel.org/cgit/linux/kernel/git/stable/linux-stable.git/commit/?id=ccdfcc398594
The fix is to patch uclibc 0.9.31 to add the missing kernel data types. The patch
will only be generated for avr32, since uclibc 0.9.31 is not available in Buildroot
for any other architecture.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As reported by Cassiano Martin in bug #6692 if host == target the nano
package can pick up the host libmagic and break.
So add a check to see if the file package is enabled and use it,
otherwise just disable libmagic support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patches 02-cpp-comments-to-c-comments.patch changes C++-style comments
into C-style comments.
This is unneeded, since gcc accepts C++-style comments in C code anyway.
Ditch that patch, that's one less we have to handle when updating from
upstream.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In case a menu has comment without letters/numbers (eg. characters
matching the regexp '^[^[:alpha:][:digit:]]+$', for example - or *),
hitting space will cycle through those comments, rather than
selecting/deselecting the currently-highlighted option.
This is the behaviour of hitting any letter/digit: jump to the next
option which prompt starts with that letter. The only letters that
do not behave as such are 'y' 'm' and 'n'. Prompts that start with
one of those three letters are instead matched on the first letter
that is not 'y', 'm' or 'n'.
Fix that by treating 'space' as we treat y/m/n, ie. as an action key,
not as shortcut to jump to prompt.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As pointed by Thomas P. kernel 3.12 oopses when loading/using the
emulated network.
Seems 3.12 broke versatile for qemu like in the past, only in a more
subtle way this time that escaped my automated qemu builds/tests.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Offer a little bit more visibility to the companies who sponsored us,
either by sponsoring the developer days, or development
boards. Hopefully this will encourage other companies to do the same :)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Allow user to supply their own step-hooks by passing a variable
on the make command-line:
make BR2_INSTRUMENTATION_SCRIPTS=/path/to/my/script
This can be useful to run site-specific actions at each step of the
build process, such as logging installed, removed or modified files,
do sanity checks on installed files...
It is possible to call more than one script, by passing a space-separated
lists of scripts to call.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This hooks will let us instrument the build process in many ways:
- log current step to see what broke
- time each step to see what is worth optimising
- sanity-check installed files (rpath, overwritten files...)
- call user-provided script
- ...
The steps are coarse-grain, and all have a 'start' and a 'end' hooks.
Here is the list of available steps (8 total):
- extract
- patch
- configure
- build
- install-host
- install-staging
- install-image
- install-target
The download, clean and uninstall steps are not instrumented on purpose.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also export BUILD_DIR for post-{build,images} hooks, so they do have
a place to store generated files.
Note: this will be more einteresting for the instrumentation of steps,
to come in a later patch.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Due to some tricky make behavior, the license texts of host packages that
did not provide an explicit HOST_FOO_LICENSE_FILES definition was not saved.
The problem is that it is not straightforward to use a variable
defined/updated inside an evaluated block as input to a foreach statement.
If you try to use $(FOO) then only the original value of FOO is used for
foreach, any update inside the block is ignored. However, if you use
$$(FOO), the entire contents of FOO (typically a list of items) is passed
as one item to foreach, thus causing just one iteration instead of several.
>From Arnout Vandecapelle's explanation:
Any variable referenced with a single $ inside the inner-generic-package
macro is expanded before the resulting contents are eval'ed. Therefore, it
is not possible to refer to variables defined by the inner-generic-package
macro from within a single-$ function call.
To fix the problem, one should defer the evaluation of the entire block
using double dollar signs.
Additionally, a few empty lines have been added to the legal-info-foo block
for clarity.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the generic package handler checks for a directory with patches
before starting apply-patches.sh, this is not the case for gcc: the
script is called, even if there is no directory with patches. This results
into a build failure, as apply-patches exits with error code 1 if the
directory doesn't exist.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of using a (e)glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(e)glibc doesn't support a fully statically linked userspace. Even a
basic program such as Busybox fails to do authentication due to glibc
loading some libraries dynamically. Therefore, we disable the
possibility of building a glibc toolchain when
BR2_PREFER_STATIC_LIB=y.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The glibc and eglibc support has been introduced since a little bit of
time now, I believe we can remove the "experimental" statement next to
it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
icu depends on __sync_sub_and_fetch and other atomic primitives that
don't exist in the ARC toolchain yet.
[Peter: adjust beecrypt/php comment dependency, don't mention atomic builtins]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch fixes the following whitespace problems in Config.in files:
- trailing whitespace
- spaces instead of tabs for indentation
- help text not indented with tab + 2 spaces
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
3.12 release notes:
* Fix: Remove alternate method to check for VLAN tag offload on Linux
< 2.6.37 (-k/-K options)
* Fix: Hide state of VLAN tag offload and LRO if the kernel is too old
for us to reliably detect them (-k option)
* Feature: Add register dump support for Solarflare SFC9100 family
(-d option)
3.12.1 release notes:
This includes a couple of changes that should have gone into 3.12.
* Fix: Memory corruption when applying external calibration to
SFF-8472 module diagnostics (-m option)
* Feature: Add Intel 82599 and x540 DCB registers to dump
(-d option)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Building host-bison needs perl 5.8.7+, as it uses the "-f" option
for site customization scripts. This feature was added in 5.8.7.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I have just released version 3.2.1 of the pciutils. It's purely
a maintenance release with a couple of minor bug fixes and minor
improvements. Thus quoth the changelog:
2013-11-10 Martin Mares <mj@ucw.cz>
* Released as 3.2.1.
* CardBus bridge capabilities are displayed.
* PCIe L1 PM substates are decoded.
* Various bugs were fixed in decoding of PCIe capabilities.
* The sysfs back-end does not spit out unnecessary warnings when
empty slots report only a partial device address. This actually
happens on IBM pSeries.
* Updated pci.ids to the today's snapshot of the database.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The option to choose init system was below the one for /dev management.
As Systemd forces the use of udev, it is logical to swap them.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump for a few more options (eg. setting the palette in 4- or 8bpp,
and rendering camera preview with GL).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The license of libmodbus is LGPL v2.1 or later and the
licence of programs in tests directory is GPL v3. So
specify only LGPL v2.1.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Sections of the hplip-fix-make.patch patch file were removed, because they
no longer appear in the Makefile.am file.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Adds U-Boot image support for cpio root filesystems. This allows you to
use the bootm command in U-Boot to load the rootfs. It makes it possible to
verify the CRC of the initramfs before booting the kernel.
[Spenser: wrote first version of the patch.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Previously, a symlink was created to the uncompressed filesystem,
which made it a bit useless in case compression was chosen.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This makes the compression extension available in a variable, so it
can be used by the fs-specific commands. In this patch, it is used
by iso9660. Following patches show more use cases.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will allow us to remove the unused ROOTFS_$(FSTYPE)_POST_GEN_HOOKS.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on a suggestion from Peter, this commit factorizes the logic and
regular expressions that are used to find the sysroot and libdir for a
given compiler. It reduces a bit the duplication of code, and
centralizes the most bizarre part of this logic in one place.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a1d94aaa3a ('toolchain-external: add support for musl C
library'), we made the following change to the SYSROOT_DIR mangling
logic:
- SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:usr/lib(32|64)?/(.*/)?libc\.a::'` ; \
+ SYSROOT_DIR=`echo $${LIBC_A_LOCATION} | sed -r -e 's:(usr/)?lib(32|64)?/(.*/)?libc\.a::'` ; \
This was needed to accomodate for musl based toolchains that don't
have libc.a in usr/lib/..., but directory in lib/... Basically, the
change makes the usr/ at the beginning optional.
However, with the very permissive (.*) matching in the middle of the
path, the change above had an unexpected consequence: any path contain
'/lib' would be truncated before this lib. As an example, Peter
reported that his builds, running from /var/lib/buildbot/ were no
longer working because the SYSROOT_DIR was decided to be /var instead
of something like
/var/lib/buildbot/buildroot/output/host/opt/ext-toolchain/arm-linux-gnueabihf/libc/.
So, this commit changes (again!) this regexp by changing (.*) to
([^/]*), the idea being that it will match only *one* path
component. Note that this intermediate (.*) directory was added in
e6e60becb0 ('external-toolchain: add support for Linaro 2012.01') to
accomodate for Linaro toolchains that have a subdirectory in their
sysroot named after the target tuple:
$ ./output/host/opt/ext-toolchain/bin/arm-linux-gnueabihf-gcc -print-file-name=libc.a
/home/thomas/projets/buildroot/output/host/opt/ext-toolchain/bin/../arm-linux-gnueabihf/libc/usr/lib/arm-linux-gnueabihf/libc.a
In addition to this, this commit also makes sure that the change
making usr/ optional is properly reported on all the instances of this
regular expression.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'Patching' message in the generic infrastructure prints not only the
package name, but also a reference to the assumed package directory, based
on FOO_DIR_PREFIX/FOO_RAWNAME. This doesn't really add value, as the name
of the package is already apparent from the message and its location should
be obvious. Hence, this patch simply reduces the print to "Patching".
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Variable FOO_DIR_PREFIX is populated from pkgparentdir by the various
package infrastructures. However, if that would be empty (which in fact is
the case for the linux package), FOO_DIR_PREFIX would be set to
'$(TOP_SRCDIR)/package'.
Not only does this make no sense (LINUX_DIR_PREFIX becomes /package/linux,
and for all other packages pkgparentdir is not-empty anyway), but it is also
using a non-existing variable TOP_SRCDIR.
This patch therefore removes the incorrect default.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Split out the information on hooks to a separate section (and source file).
Not only because the hooks are useful for all infrastructures (and thus
don't really fit specifically in the generic infrastructure section), but
also for clarity when the info on hooks will be expanded in later patches.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot has three places where rsync is used:
1. to copy the target skeleton
2. to copy the rootfs overlay(s)
3. to copy overridden package sources
In all of these cases, we want to exclude version control files by default.
Place 1 and 2 used an identical set of explicit --exclude options, while
place 3 used the option --cvs-exclude. This last option, however, not only
excludes version control files, but also binary files (.o, .so) and any file
or directory named 'core' (a problem for the linux kernel that has several
directories with this name). Moreover, the exact list of excluded files when
using --cvs-exclude depends on the version of rsync.
This patch creates one global variable RSYNC_VCS_EXCLUSIONS that can be used
by the various rsync commands. It excludes the version control files of
svn, git, hg, cvs and bzr.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
One of the use cases is for the 'local packages' to restore
the SCM info. Some packages use this information to generate
version info during build time. In this case, the local package
can have this hook to restore it by symbolic link for example.
[Thomas: update commit title]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For configurations using a toolchain that is preinstalled on
the host, <pkg>_SITE and <pkg>_SOURCE variables must be kept
empty to avoid downloading any toolchain package.
The actual implementation has been proposed by Thomas Petazzoni.
Signed-off-by: GONZALEZ Laurent <br2@gezedo.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When a package A depends on config option B and toolchain option C, then
the comment that is given when C is not fulfilled should also depend on B.
For example:
config BR2_PACKAGE_A
depends on BR2_B
depends on BR2_LARGEFILE
depends on BR2_WCHAR
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
This comment should actually be:
comment "A needs a toolchain w/ largefile, wchar"
depends on BR2_B
depends on !BR2_LARGEFILE || !BR2_WCHAR
or if possible (typically when B is a package config option declared in that
same Config.in file):
if BR2_B
comment "A needs a toolchain w/ largefile, wchar"
depends on !BR2_LARGEFILE || !BR2_WCHAR
[other config options depending on B]
endif
Otherwise, the comment would be visible even though the other dependencies
are not met.
This patch adds such missing dependencies, and changes existing such
dependencies from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(untested)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libpthread-stubs, libX11, and a few more xorg packages use threads. Since
almost all xorg packages depend on libX11 directory or indirectly, and
since the remaining ones are pretty useless on their own, just require
threads for xorg as a whole.
The thread dependency is kept in libpthread-stubs, because that package
will move out of the x11r7 directory later (pending patch by Spenser
Gilliland), so the dependency on threads will be required then.
Fixes:
http://autobuild.buildroot.org/results/609/6099baac4bb469ae18aab6512233db25183eaabd/
[Arnout: disable all of xorg, correct comment]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When calling 'tr' without quoting braces, bash can make really weird things
if there are existing 'single-letter-named' directories
eg:
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
aaa
thierry@thierry-desktop:~$ mkdir m
thierry@thierry-desktop:~$ echo AAA | tr [A-Z] [a-z]
AAA
The (quick) analysis is that the callee (tr) argvs then
contain 'm' thus the translation does not work
Using quotes works around it:
thierry@thierry-desktop:~$ echo AAA | tr '[A-Z]' '[a-z]'
aaa
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The BR2_UCLIBC_MIPS_ISA hidden Config.in variable defines which uClibc
config option should be enabled for a given MIPS architecture
variant. Therefore, using lower case names doesn't work: they should
be upper case, to match uClibc config option names. This commit makes
sure the mips32, mips32r2 and mips64 builds select the appropriate
uClibc configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Cc: Markos Chandras <Markos.Chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add libpng libraries to freetype-config and freetype2.pc when they're
needed to avoid build breakage for other packages.
Patch in a different form is already upstream.
Fixing configure & friends is not so good since autoreconf busts things
up because of the odd way things are done (upstream fixed too it seems).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We name all of our boards and defconfig files based on the boards
fullname, not a nickname or a shortname.
'rpi' is short for Raspberry Pi, so name all our Raspberry Pi ressource
with 'raspberrypi' instead of 'rpi'.
This should also help Buildroot-newcomers to recognise Raspberry Pi
related files (defconfig and board doc).
Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: reverse the rename]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the announcement:
This release fixes a security bug:
* sshd(8): fix a memory corruption problem triggered during rekeying
when an AES-GCM cipher is selected. Full details of the vulnerability
are available at: http://www.openssh.com/txt/gcmrekey.adv
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As stated on the libqrencode web site, PNG (or SDL) is only
needed for the test and utility programs; the library itself
has no dependencies.
While we are here, remove spaces in the ifeq clause, to match
the examples in the buildroot manual.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 94c72087f3 ("module-init-tools: remove package") removed the
module-init-tools package and therefore added the corresponding config
option in Config.in.legacy. However, the commit forgot to add the
"select BR2_LEGACY" that ensures the build cannot proceed until the
user has acknowledged the change (i.e kmod replacing
module-init-tools).
This commit adds this missing "select BR2_LEGACY".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Prior to uClibc commit f143f920694c, uClibc used to always include the
gnu obstack extension, which is used and required by many tools, such as
binutils.
Because of the change mentioned above, obstack is now optional, and got
disabled per default, so enable it in the uClibc snapshot configuration file.
Signed-off-by: Chris Zankel <chris@zankel.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using kernel headers newer than 3.6.x, uclibc 0.9.31.1 fails to build:
In file included from output/host/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/rtnetlink.h:6,
from libc/inet/netlinkaccess.h:34,
from libc/inet/if_index.c:36:
output/host/usr/avr32-buildroot-linux-uclibc/sysroot/usr/include/linux/if_link.h:314: error: expected specifier-qualifier-list before '__be16'
make[1]: *** [libc/inet/if_index.os] Error 1
make[1]: Leaving directory `output/build/uclibc-0.9.31.1'
make: *** [output/build/uclibc-0.9.31.1/.stamp_built] Error 2
This patch adjusts the system type definitions in the netlinkaccess.h
header, updating the types to match those used in uClibc 0.9.33.2.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenPGM builds incorrectly on AVR32 with gcc-4.2.2-avr32-2.1.5.
Since it is presumed to be the only GCC version used by Buildroot
for AVR32, this patch disables openpgm for all cases when AVR32
is selected as the target architecture, including when a toolchain
is downloaded or preinstalled (this is what Buildroot autobuilders
do).
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch reinstates support for uClibc version 0.9.31, which was removed
from Buildroot in commit 8abb5b33c1
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
openpgm doesn't build correctly on AVR32 using
gcc-4.2.2-avr32-2.1.5 toolchain: it is configured to call
intrinsic atomic functions not provided by the toolchain,
so they are propagated as unresolved external symbols in the
built openpgm libraries. This breaks programs that try to link
openpgm, because they do not know where to get those either. For
instance, it breaks building zeromq tests when PGM support is
selected.
This commit disables openpgm on AVR32 due to apparent absence of
interest in this package on that architecture and it breaking too
many test builds.
Fixes http://autobuild.buildroot.net/results/5a3261109ea63ba17375003eabd8b5d88757865f/
(at least)
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For out-of-tree builds, this use-case fails to build:
$ make clean all
This is because 'all' is filtered-out in the Makefile wrapper, since
the wrapper itself has a 'all' target.
The 'all' target is just the usual naming for the default target in a
Makefile. In fact, the first target is the default one, so we can name
it whatever we want.
Rename the Makefile wrapper 'all' target to avoid name-clashing.
Fixes#6644.
Reported-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ryan Barnett <rjbarnet@rockwellcollins.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Mathieu Benoit <mathieu.benoit@savoirfairelinux.com>
[yann.morin.1998@free.fr: further improvements for readability and
completeness]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
'nut' are the Network UPS Tools.
[Note: original patch from Dallas, but completely revamped
by Yann, so nothing remains from the original patch, but two
variable names.]
Signed-off-by: Dallas Clement <dallas.a.clement@gmail.com>
[yann.morin.1998@free.fr: refresh patch, use latest version,
add license, fix commit message, add dependencies, fix
runtime path, fix libs-config, move to 'system utils']
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As suggested by Alexander Lukichev and Thomas Petazzoni on the mailing list,
only one of the two avr32 microarchitectures is relevant for Buildroot:
avr32 Linux implies the avr32b microarchitecure, as used in the ap7000.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* The PID file is not created unless the '-m' option is passed to
start-stop-daemon.
* Remove the mark '-m 0' option as it's not supported by busybox's
syslogd.
* Syslogd and Klogd forks to background by default giving as a result
that the pid stored in the PID file is not correct. Let the
background job be done by 'start-stop-daemon' by passing '-n'
(foreground) to the daemons and '-b' to start-stop-daemon. This
way the pid stored in the PID files is correct.
Signed-off-by: Javier Viguera <javier.viguera@digi.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is the list needed to run the Linaro pre-built toolchain
on a 64-bit Ubuntu 13.10 system.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This bump to allign with the tzdata bump in previous commit.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for camera features (exposure, capture loop, shutter speed),
h264 encoding headers, EXIF thumbnails.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also tweak the kernel and buildroot config for basic WiFi support.
And fetch the ASoC patches for builtin audio.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WebKit has some architecture specific support, and therefore is not
necessarily available for all architectures. Make sure the Qt WebKit
option cannot be selected on those architectures that are not
supported.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Enable demo mode for netperf to activates a global "-D" <interval> option.
This option will display interim results at least every time interval.
Signed-off-by: Kelvin Cheung <keguang.zhang@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
dhcpcd fails to build on non-MMU platforms, even with the
--disable-fork option:
bind.o: In function `_daemonise':
bind.c:(.text+0x62): undefined reference to `_fork'
collect2: ld returned 1 exit status
Therefore, we make dhcpcd depend on MMU support, and remove the
non-MMU condition in the .mk file. More recent versions of dhcpcd do
support non-MMU properly, but this commit intends to be only a fix.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
The libnl configure script has a --{enable,disable}-cli options that
allows to enable or disable the compilation of the libnl tools. Use
this option instead of compiling everything and then removing the
installed programs.
Note that we also get rid of the uninstall command, which is planned
to be globally removed in Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Samuel Martin <s.martin49@gmail.com>
libcap currently has one patch, but it is named using the old naming
strategy, which includes the package version, but not a patch
number. This commit switches this to use the new patch naming
strategy.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
According to the documentation, chapter
6.2.8.2 How to add a package from github
"
[...]
FOO_VERSION = tag or full commit ID
FOO_SITE = http://github.com/<user>/<package>/tarball/$(FOO_VERSION)
[...]
- The tarball name generated by github matches the default one from
Buildroot (...),
so it is not necessary to specify it in the +.mk+ file.
"
This commit makes the appropriate changes.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
rsync by default compiles statically its own zlib and popt
libraries, it is better to use system wide libraries instead -
both for disk and memory consumption. Change rsync package
accordingly.
Also previously a debug configure option has been lost, as
overwritten by '--with-included-popt' option - fixed.
For example, on ARMv5 rsync binary size is reduced by about 25%.
Signed-off-by: Denis Mingulov <denis@mingulov.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The output extension and the generation messages refer to 'text', but the make
target was confusingly 'txt'. This patch changes the make target for
consistency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
To generate the manual, you need a few tools. If these are not present,
pretty cryptic error messages are given.
This patch adds a simple check for these dependencies, before attempting to
build the manual.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Comment 7e37d235f "zeromq: needs threads" adds BR2_TOOLCHAIN_HAS_THREADS
dependency but forgot to add corresponding comment for cppzmq and czmq. Fix it.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Adding support for sysvinit to install reboot, poweroff, and pidof
commands available in /sbin.
Fixes bug #6620
Removed uninstall commands since they aren't used.
There is an error with sysvinit that will prevent the system from booting
if "dshm::sysinit:/bin/mkdir -p /dev/shm" is not present in the inittab.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As noted by "George" in bug #6416, the xenomai-do-not-install-devices
patch is not needed, since Xenomai provides a "install-user" target to
only install the libraries/headers and not the device files. This
patch changes xenomai.mk to use 'install-user' and removes the useless
patch.
Fixes bug #6416.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds missing comments about (e)glibc dependencies and updates the
text of existing comments.
Additionally, it splits dependency expressions for the touched packages from
depends on BR2_BASE_DEP && !BR2_TOOLCHAIN_USES_GLIBC
to
depends on BR2_BASE_DEP
depends on !BR2_TOOLCHAIN_USES_GLIBC
so that (positive) base dependencies are separate from the (negative)
toolchain dependencies. This strategy makes it easier to write such comments
(because one can simply copy the base dependency from the actual package
config option), but also avoids complex and long boolean expressions.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Ncurses not necessary when building host-util-linux, so passing
--without-ncurses avoids from misdetecting an installed host ncurses
on the build machine.
[Thomas: improve commit message]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some architectures one can be running a 64-bit kernel with a 32-bit
userland. Such is the case for sparc64 (unsupported) for example and
mips64 with n32 ABI.
Some tools that interface directly with the kernel need to be built
specially for this, so introduce this symbol to tweak their build in
one central kludge to be future-proof.
Example: bug #6602.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Samuel Martin noticed, libthread_db is not only needed when
cross-gdb+gdbserver is used, but also when the native gdb is used on
the target. As a consequence, this patch modifies the glibc package
and the external toolchain logic to ensure that libthread_db is copied
to the target either when the native gdb or gdbserver is enabled, by
relying on the BR2_PACKAGE_GDB option, which is enabled when native
gdb and/or gdbserver are enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Maxime Ripard reported that the Linaro toolchains were not visible
when selecting a Cortex-A, but forgetting to set the EABI to
EABIhf. While this is expected, Buildroot should normally should a
comment in this case. However, the comment is only visible when the
selected ARM architecture is not ARMv7 *and* the EABI is not
EABIhf. Instead, make the comment visible when either the selected
architecture is not ARMv7 *or* when the selected EABI is not EABIhf.
While we're at it, reword the comment text so that it actually fits
within the limits of the menuconfig screen.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
In 11ec38b695 ("toolchain-external: fix Linaro ARM toolchain
support"), we fixed the support for Linaro EABIhf toolchains by adding
a /lib/arm-linux-gnueabihf -> /lib symbolic link. This is needed
because the dynamic loader looks for libraries in
/lib/arm-linux-gnueabihf rather than the usual /lib, but Buildroot
installs all libraries in /lib.
However, we forgot that the dynamic loader also loads libraries from
/usr/lib/arm-linux-gnueabihf rather than /usr/lib, so this patch fixes
that by adding the necessary symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Cc: Maxime Ripard <maxime.ripard@free-electrons.com>
With commit b58bf60b51 the libgen.h
include was removed from confdata.c, but it is needed for the dirname
function declaration.
Fixes the following compile warning:
./confdata.c: In function ‘conf_split_config’:
./confdata.c:849:6: warning: assignment makes pointer from integer
without a cast
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Previously, an external-toolchain on a mipsel/mips64el target
didn't select the appriopriate endianness but
it asked the user to set the correct CFLAGS on his/her own.
We fix this by appending "-EL" to the toolchain wrapper options
if the user has selected a mipsel/mips64el target.
[Thomas: remove unneeded test on BR2_ENDIAN, since mipsel and mips64el
are always little-endian, and add the corresponding big endian case.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set --with-arch instead of --with-tune for MIPS so that the
generated code will be optimal for the given MIPS ISA.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Because of the new fl_open_uri() function since the fltk bump using
fork().
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
They can fail on some odd toolchain configurations because of
buildsystem shortcomings and aren't expected to be used in normal
scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Current version of config.guess may fail to detect host libc version,
which results in problems with configure when building gcc. Current patches
are removed. Patch to add support for ps2 is removed as it was discussed on
buildroot mailing list that it is no longer needed.
[Arnout: drop the 'improve uClibc' patch, update commit message, update to
more recent version, update README.]
Signed-off-by: Jouko Nikula <jouko.nikula@espotel.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
trace-cmd use python-config to find out which headers
and libraries should be used to link against the Python libraries.
By default, python-config returns paths that are inappropriate for
cross-compilation.
This patch replaces python-config with pkg-config as a workaround.
Add PYTHON_VERS to build trace-cmd with python2 or python3
Fixes:
http://autobuild.buildroot.net/results/980/980875810528ac1dee34b8c268d9b3c40b2e35ec/
Signed-off-by: Romain Naour <romain.naour@openwide.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
opkg has released a new version v0.2.0. The opkg community is also on
the way to switching completely from subversion to git.
The current git repository is placed on Bitbucket and will probably move
once again if there will be find a new home for the project.
https://bitbucket.org/opkg/opkg
The new version 0.2.0 is almost a bugfixing release with a lot of small
changes.
This patch is adding the license info too.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
jq is like sed for JSON data - you can use it to slice and filter
and map and transform structured data with the same ease that sed,
awk, grep and friends let you play with text.
[Peter: fix license, add flex/bison deps, force c99]
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch mostly fix the casing on different entries titles.
It also changes the name of "Misc devices firmwares" to a simpler
"Firmware".
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch moves :
"Filesystem and flash utilities" menu
"X applications" category
"JSON/XML" menu
so they are in alphabetical order with the rest of the file.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
kobs-ng failed to build with 2.6.36, because enum tested with #ifndef
mtd.c: In function 'mtd_open':
mtd.c:696:42: error: 'MTD_FILE_MODE_NORMAL' undeclared (first use in this
function)
mtd.c:696:42: note: each undeclared identifier is reported only once for each
function it appears in
mtd.c: In function 'mtd_set_ecc_mode':
mtd.c:896:43: error: 'MTD_FILE_MODE_NORMAL' undeclared (first use in this
function)
mtd.c:914:43: error: 'MTD_FILE_MODE_RAW' undeclared (first use in this
function)
Do kernel version test before enum redefines.
Signed-off-by: Sergey Alyoshin <alyoshin.s@gmail.com>
Tested-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply a patch from upstream.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BerkeleyDB has changed its license since version 6. New license (AGPL) may
be incompatible with some packages. So we prefer to stick to version 5
This reverts commit 4c478de2e7.
[Peter: adjust comment as suggested by Yann]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
usage:
# set cache limit size
make CCACHE_OPTIONS="--max-size=5G" ccache-options
# zero statistics counters
make CCACHE_OPTIONS="--zero-stats" ccache-options
[Peter: drop the redundant ifeq]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
For the target, add --with/out to configure options as needed.
For the host, disable everything.
This was triggered by a failing build of the host package because it tried to
link the shared library with libbz.a, which isn't compiled with -fPIC.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Although the configuration options for custom repository locations and
versions are very similar between the linux and uboot packages, there are
some minor differences. This patch lines up both packages.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some Config.in(.host) files have constructs like:
config FOO_VERSION
string
default "1.0" if FOO_1_0
default "2.0" if FOO_2_0
default $FOO_CUSTOM_VERSION if FOO_CUSTOM
The dollar sign here is not needed and confusing, so can be removed.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When legacy symbols are selected, the menuconfig shows the explanation for
users, immediately followed by the line "Legacy options removed in 2013.08".
In order to visually keep these apart, we introduce a separator.
Note that a line with all spaces is not correctly shown by menuconfig (the
width will not be kept at 80 characters, so the output is '*** ***').
A dashed line seemed a logical alternative, and with another dashed line on
top, the description becomes a block.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch clarifies the message shown to users in the legacy menu.
It explicitly mentions the need to save the configuration before disabling the
legacy options.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The existing comments in Config.in.legacy are not entirely in-line with
current practice. The comments implies that BR2_LEGACY should not be set when
the conversion from old-to-new symbol can be done automatically using the
appropriate 'select' statements. However, none of the existing legacy options
does it this way. Moreover, I think it's intentional that the user is notified
of the change, so that the removal of the legacy options in later buildroot
versions no longer poses a problem.
Additionally, the comments now describe how to handle string options.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Following patches are removed since they are upstreamed:
- qt5base/qt5base-0001-eglconvenience-add-egl-to-CONFIG-to-get-correct-incl.patch
- qt5jsbackend/qt5jsbackend-0002-fix-uclibc.patch
Remove "-nomake demos" from configure options since "demos" directory is
merged into examples.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Tested-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
docker is using autotools-package while it is in fact just a plain make
package.
Remove docker-1.5-skip-configure.patch which was just a hack to avoid
calling the non-existent configure script.
Remove docker-1.5-pkgconfig.patch which is not needed when PATH is set
appropriately.
Add a XLIBPATH option to the command line to avoid linking with
/usr/X11R6/lib.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package builds with -m32. In buildroot, we don't have multilib
support so only the 64-bit libraries are available, which can't be
linked against these 32-bit object files.
I've tested this with the Sourcery and buildroot toolchains - neither
works.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
$(BUILD_DIR) is a nice place to put files generated during the build.
With the advent of user-supplied step-hooks, they may want to store
some information on the build.
Export BUILD_DIR to that effect; update manual accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add the -D to install commands to ensure that all the necessary
installation directories exist.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
It fails to build with my makeinfo version. Note that the autobuilders don't
see this, probably because they don't have makeinfo installed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
perf uses asciidoc to generate documentation, but /usr/bin/asciidoc will
try to use buildroot's host-python which doesn't have the required
unicodedata. Recent kernels always try to build the man pages when
installing. To avoid that, define ASCIIDOC as an empty string so the
Makefile can't find the executable and skips the documentation
generation.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 33a9d34ff3 fixed the staging
install for webkit, which was hanging due to deadlock during parallel
make install.
This problem also afflicts the target install, which is fixed by this patch.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This gets around the following build errors that occurs on a system with
perl 5.18:
[...]
wget.pod around line 2151: Expected text after =item, not a number
wget.pod around line 2156: Expected text after =item, not a number
wget.pod around line 2162: Expected text after =item, not a number
[...]
This is already committed upstream and this patch will be unnecessary in
wget 1.15 when it is released:
commit 7f43748544f26008d0dd337704f02a6ed3200aaf
Author: Dave Reisner <dreisner@archlinux.org>
Date: Mon Jun 17 23:31:46 2013 +0530
Fix error in texi2pod intriduced with Perl 5.18
Signed-off-by: Andrew Ruder <andrew.ruder@elecsyscorp.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
-Werror shouldn't be used in released code since it can
cause random build failures on moderate warnings. It also
depends on the used toolchain since different toolchains may
or may not print the same warnings.
Fixes the following build problem on MIPS64/n64:
main.c: In function handle_dm_alert_msg:
main.c:336:5: error: format %llx expects argument of
type long long unsigned int, but argument 4 has
type __u64 [-Werror=format=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Needs three patches from upstream, plus a custom patch to disable tests.
Drop old patches, all applied upstream or no longer needed.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch lines up the comments in Config.in files that clarify which
toolchain options the package depends on.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the comments in Config.in files when depending on toolchain
options are not at all lined up. This patch adds a section to the
documentation that explains which format is to be used.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: fix missing double-quote at end of comment]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The way the compositor was selected in Config.in was counter-intuitive,
because the fbdev backend is selected by default even if a different one
is available.
Instead, select the fbdev backend only if no other one was selected by
the user.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[yann.morin.1998@free.fr: don't reorder entries, keep alphabetical sort]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes below build error when executing
"make tcl-dirclean; make tcl-rebuild".
ln -s tclsh8.4 /opt/test/br-x86/buildroot/output/target/usr/bin/tclsh
ln: failed to create symbolic link '/opt/test/br-x86/buildroot/output/target/usr/bin/tclsh': File exists
make: *** [/opt/test/br-x86/buildroot/output/build/tcl-8.4.19/.stamp_target_installed] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This fixes below build error when executing
"make host-sam-ba-dirclean; make host-sam-ba-rebuild".
ln -s ../../opt/sam-ba/sam-ba /opt/test/br-x86/buildroot/output/host/usr/bin/sam-ba
ln: failed to create symbolic link '/opt/test/br-x86/buildroot/output/host/usr/bin/sam-ba': File exists
make: *** [/opt/test/br-x86/buildroot/output/build/host-sam-ba-2.12/.stamp_host_installed] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Using the 'local' site method works just fine for target
packages. However, for host packages, when HOST_<pkg>_SITE is
automatically defined by the package infrastructure to be equal to
<pkg>_SITE, when defining the <pkg>_OVERRIDE_SRCDIR, the $($(2)_SITE)
is empty, due to a missing additional dollar sign.
This patch ensures that the <pkg>_OVERRIDE_SRCDIR gets the correct
value, regardless of whether the HOST_<pkg>_SITE variable has been
defined by the package itself, or inferred by the package
infrastructure using the <pkg>_SITE value.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reported-by: http://stackoverflow.com/questions/19311747/buildroot-cant-use-local-site-method-for-custom-host-packages
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Angstrom toolchains available at
http://www.angstrom-distribution.org/toolchains/ are not usable as
external toolchains in Buildroot, because they are not pure toolchains
with just the C library, but instead complete SDKs with many
cross-compiled libraries (Gtk, Qt, glib, neon, sqlite, X.org, and many
more, approximately 200 MB of libraries).
Buildroot cannot use such toolchains, and while this is documented in
our manual, some users still try to do this. Today, one such user came
on the IRC channel, reporting a build problem, which we started
investigating, only to realize after a long time that he was using an
Angstrom toolchain.
To avoid this problem in the future, we explicitly check if the
toolchain is from Angstrom by looking at the vendor part of the tuple
exposed by the toolchain: as soon as it is
<something>-angstrom-<something-else>, we reject the toolchain with an
explanation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch:
- fbgrab-proper-Makefile-for-cross-compiling.patch
has been integrated in the new upstream version.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The egl.pc file installed exposes version 1.0, while it really is a
much higher version.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The original titles did no longer correspond with the actual menu names.
Additionally, choose a name that better reflects the fact that this is a
list.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Procedure highly inspired by:
http://wayland.freedesktop.org/raspberrypi.html
The resulting weston works almost flawlessly, but requires a bit
of love:
- /boot/config.txt must include this line: dispmanx_offline=1
- at least 128MiB of RAM must be allocated to the GPU
- after 24-or-so terminal-clients are connected, the screen
turns black. Exiting a client restores the screen
It seems increasing/decreasing the amount of memory allocated to
the GPU makes the clients limit to wobble above/below 24 clients
at a time. YMMV, as they say...
Without dispmanx_offline=1, the limit is much below 24, at around 13.
But changing the amount of memory allocated to the GPU does not change
this limit in this case. YMMV, again.
Anyway, there are not many different clients available, besides the
terminal client, since all other clients are EGL-based, and there
is (yet) no EGL support (for weston!) on the RPi. So the tests were
made only with the terminal client.
The system is rather smooth, but spwaning too many clients in a
rapid-fire is sure to exhibit some lag. Resizing windows is a bit
jerky, but moving them along is fine.
Note: the config option has a depends on THREADS due to rpi-userland,
even though weston itself already inherits the same dependency from
wayland. But better be clean and safe.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While porting wayland/weston to run on the RPi, I always tripped on
this assert.
Thinking there was an issue with weston, I poked the weston guys on
IRC about the issue. 'daniels' on irc.freenode.net/#wayland suggested
removing the assert altogether, as that's what they had pushed
upstream in their wayland pull-request:
https://github.com/raspberrypi/userland/pull/92
Turns out they forgot to include this in their pull-request, but that
they were using a patched rpi-userland without that assert.
And indeed, without that assert, weston runs on the RPi. :-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
configure whines while checking for wayland-scanner.
wayland-scanner is used to generate the protocol parser C files from
the protocol definition XML files.
weston has a hard-dependency on wayland-scanner, so it can regenerate
its shell/mouse/keyboard/... "handlers".
Since we're using a tarball, those protocol files are already generated
and up-to-date, but the check is hard-coded and unconditional. If
wayland-scanner is missing, configure fails.
We could well patch away this check, but we'd have to carry and maintain
it probably for ever.
Better to fix it: add a patch from upstream weston to fix configure
whining.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even with EGL disabled, weston-1.2.2 still tries to build the
simple EGL clients, so they need to be explicitly disabled.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes for de-interlacing of /unusual/ MPEG streams.
Yes, some people seem to enjoy generating MPEG streams in
which interlacing is not constant. That's apparently 100%
valid, but yet very unusual, and at the very least, weird.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The weston package uses the $(WAYLAND_VERSION) variable instead of
$(WESTON_VERSION).
This went unnoticed for now, as we were using the same version for
wayland and weston. But that's not always the case, since we have,
for example: wayland-1.2.1 and weston-1.2.2, and no wayland-1.2.2.
Fix this by using the correct variable.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also opkg needs mmu even without gpg verification so mark as well.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Redis project home page moved to redis.io, thus also update the download
url accordingly.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The main file of this package is src/libnetfilter_cthelper.c, which states
GPLv2+.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes bug #6452 (eglibc from Linaro 2013.07 not copied to
target correctly) by:
* Copying only the relevant library loader to the target on ARMhf
(i.e ld-linux-armhf.so and not ld.so*). This is needed since Linaro
toolchains provide two library loaders, one ARMv7 hf, and one ARMv4
soft-float.
* Making sure a $(TARGET_DIR)/lib/arm-linux-gnueabihf/ symbolic link
to $(TARGET_DIR)/lib/ exists, since the dynamic loader of Linaro
toolchains expects libraries to be found in
$(TARGET_DIR)/lib/arm-linux-gnueabihf/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The copy_toolchain_lib_root function is responsible for copying a
given library (and its symbolic link) to the target filesystem. To do
so, it looks for the library in various locations, and then iterates
over the symbolic link all the way to the library, copying them as
needed to the target filesystem.
However, the latest Linaro toolchains bring an interesting use case:
the lib/ directory in the toolchain is organized as follows:
- ld-linux.so.3 -> arm-linux-gnueabi/ld-2.17...so
- ld-linux-armhf.so.3 -> arm-linux-gnueabihf/ld-2.17...so
- arm-linux-gnueabi/
- all ARMv4T soft float libraries
- arm-linux-gnueabihf/
- all ARMv7 hard float libraries
In order to match what we do with all other toolchains, we want all
those libraries and symbolic links to be copied directly under
$(TARGET_DIR)/lib. This commit does that by adjusting the copy logic.
This is part of the fix for bug #6452 (eglibc from Linaro 2013.07 not
copied to target correctly).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds support for external toolchains based on the musl C
library, as available from http://www.musl-libc.org.
Note that the pre-built musl toolchains available from
http://musl.codu.org/ are not working for the moment, since they lack
sysroot support. However, this problem has been reported to the
maintainer, who has already added sysroot support in his scripts at
https://bitbucket.org/GregorR/musl-cross, and therefore the next
version of the pre-built toolchains should work with Buildroot
out-of-the-box. In the mean time, the musl-cross script must be used
to build the toolchain.
[Peter: reword comment]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The check_glibc function contained checks to verify that the user had
properly enabled the largefile, IPv6, locale and wchar options, to
match how glibc is configured. This was useful when the support for
glibc external toolchains was introduced, but since then, we added the
BR2_TOOLCHAIN_USES_GLIBC symbol that automatically enables largefile,
IPv6, locale and wchar support when a glibc or eglibc external
toolchain is used. Therefore, many of the check_glibc checks are
useless now, so we can remove these.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit fixes various typos and mistakes in the comment at the top
of the helpers.mk file:
* usefull -> useful
* The optional stripping of libraries no longer exists, so there's no
reason to mention it.
* Indicate that the copy_toolchain_lib_root function is also used by
the glibc package, not only by the external toolchain logic.
* Separate more clearly the top comment introducing the entire file,
from the comment introducing the first function.
[Peter: reword top comment, add missing 'by']
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, the copy_toolchain_lib_root function took as argument the
base name of a library (e.g: libm.so), and was assuming that the usual
scheme libm.so.<x> being a symbolic link to the real library was used.
However, with musl based toolchains, the C library is named libc.so
directly, with no symbolic link at all. Therefore, this commit changes
the copy_toolchain_lib_root to move the responsibility of using a
wildcard or not after the library name the caller's responsibility.
So, all the existing LIB_EXTERNAL_LIBS values are modified to have a
.* at the end, so that the behavior is effectively unchanged.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The external toolchain code makes the assumption that all C libraries
have a ld*.so, libc.so, libcrypt.so, libdl.so, libgcc_s.so, libm.so,
libnsl.so, libresolv.so, libutil.so, and when thread support is
enabled, libpthread.so, etc.
However, this is not the case with the musl C library, which
integrates all the functionalities in a single libc.so file. In
preparation of the support of the musl library, we make the current
value of LIB_EXTERNAL_LIBS conditional to glibc or uClibc.
The addition of additional libraries through
BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS is kept outside the condition, at
the end.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The dependencies-source, dependencies-clean and dependencies-dirclean
targets are not needed, as long as 'dependencies' is not used in the
<pkg>_DEPENDENCIES of a package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit converts the 'toolchain-external' logic to the package
infrastructure.
The TOOLCHAIN_EXTERNAL_DIR variable (which points to where the
toolchain is located) is renamed to TOOLCHAIN_EXTERNAL_INSTALL_DIR,
because the former conflicts with the package infrastructure (which
defines the <pkg>_DIR variable for each package as pointing to its
build directory).
The new _EXTRA_DOWNLOADS mechanism is used for Blackfin toolchains.
The extract, configuration and installation steps are converted inside
the <pkg>_EXTRACT_CMDS, <pkg>_CONFIGURE_CMDS and
<pkg>_INSTALL_STAGING_CMDS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit converts the toolchain-buildroot logic to the package
infrastructure. The package is fairly simple as it only defines
BUILDROOT_LIBC, and depends on host-gcc-final to get the overall
internal toolchain build logic started.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit introduces a virtual package called 'toolchain', located
in 'toolchain/toolchain', which simply depends on
'toolchain-buildroot' or 'toolchain-external' depending on the
selected toolchain backend.
For now, toolchain-buildroot and toolchain-external are still manual
make targets, but the following patches convert those backends to use
the package infrastructure as well.
In addition to this:
* The main Makefile is modified to always make BASE_TARGETS point to
this new toolchain virtual package.
* The main Makefile is changed to include all the toolchain/*/*.mk
files: the toolchain virtual package, and the toolchain-buildroot
and toolchain-external directories.
* The dependency of the toolchain on prepare dirs and dependencies is
moved to the toolchain virtual package. It is moved as a
prerequisite of the "toolchain-source" rule to ensure that all
directories are prepared before we even start extracting the
toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Converting the external toolchain logic into a package raises a very
special use case that wasn't handled by the package infrastructure:
the Blackfin toolchain is delivered as two tarballs instead of
one. Unfortunately <pkg>_SOURCE only allows to pass one tarball name.
However, we really want both tarballs to be known by the package
infrastructure, so that the normal 'source' and 'external-deps'
mechanism work fine.
In order to achieve this, we add a <pkg>_EXTRA_DOWNLOADS variable,
which allows a package to list other stuff it would like to see
downloaded, but that are otherwise not used by the package
infrastructure itself: it is up to the package to do it by itself.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Until now, only the eglibc build was pulling host-gawk as a
dependency, but after more testing, it turns out that the glibc build
also requires host-gawk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Based on the contents of LEGAL, without checking the code.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the README, perl can be used either under
Artistic or under GPLv1+ license, so include both.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Because of the previous mediastreamer bump (because of the untested ortp
bump) we need to bump linphone as well to avoid build failures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes several vulnerabilities.
TODO: update to a more modern branch.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.21.1 is getting quite old, the linker issues with 2.22 seems to be
(mostly?) sorted out by now and armhf needs 2.22+, so let's bump the
default version.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Even though new packages are normally added in the right alphabetical order,
there still remain quite a number of incorrect orderings in package/Config.in.
In this patch, alphabetical order is created in each menu.
Note that this sometimes mean that packages that logically belong together, like
cups, gutenprint, hplip, are now split apart.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ext-tool.mk logic uses the TOOLCHAIN_EXTERNAL_PREFIX variable
unconditionally, even if the external toolchain is not used. Until now
this wasn't a problem since ext-tool.mk was only included when the
external toolchain backend was selected, but the next patches are
going to include this file unconditionally.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In order to avoid the work of converting the toolchain-crosstool-ng
logic to the package infrastructure, we remove it from Buildroot,
since it has been deprecated since quite some time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a 'Known issues' chapter, which lists the exceptions I have
currently in the autobuilder scripts to avoid known problems from
occuring. I believe it is more useful to document them rather than
keeping them hidden in my autobuilder script.
[Peter: s/either/either use/]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ltp-testsuite to the latest version available. In
addition to that, it also:
* Removes the ltp-testsuite-disable-controllers.patch file, which
becomes useless thanks to the workaround that consists in removing
-D_FILE_OFFSET_BITS=64 from the CFLAGS. This is necessary because
ltp-testsuite uses the non-largefile compatible <fts.h> interface.
* Marks the package as not-available on AArch64, since it doesn't
build properly. A bug has been submitted upstream to the Linaro
people doing the AArch64 support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2.0.0-b6 fix a security issue:
Under certain circumstances an FD leak occurs and may be misused for denial of
service attacks against socat running in server mode.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
tcpspray.o: In function `tcpspray':
tcpspray.c:(.text+0x4a8): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [tcpspray] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if BR2_PREFER_STATIC_LIB is set:
src/libproxychains.c:34:19: fatal error: dlfcn.h: No such file or directory
compilation terminated.
make[1]: *** [src/libproxychains.o] Error 1
In additional, the README file also mentions that this program works only on
dynamically linked programs.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Misc enhancements and fixes for USB, camera, audio, codecs, dispman,
and openMAX.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 2c859079cd (configs/qemu: bump relevant config version) renamed
a number of linux configuration files, but forgot to update the defconfigs.
Tests shows that atleast arm versatile doesn't boot with 3.11, so rename
the linux configuration files back rather than adjusting the defconfigs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No functional change, but the HEADERS_3_9 option will go away by the
time 3.9 is no longer supported, possibly leading to breakage.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes two security issues:
- The Dropbear server could be made to consume large amounts
of memory because decompressed packet sizes weren't checked.
Depending on the OS and hardware this might be a denial of
service.
- Valid users could be identified due to timing variations.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the "BR2_JLEVEL" variable is empty use "make" without
the "-j" option, because to be able to use top-level parallel
make we must not force the number of jobs in sub-make.
Example:
make BR2_JLEVEL= -j8
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
arm_nuri needs some DT fixups to switch to the 3.11.x series since it's
now default for that kernel defconfig.
[Peter: adjust comment in sparc defconfig to match]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 97c687000 (pkg-autotools.mk: default host AUTORECONF{,_OPT} to the
target values) we automatically enable autoreconf for host builds if it
is enabled for the target, so these can go.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
accurip, audiofxbad, ivtc, midi and yadif are new dependency less plugins,
dtmf, rtpmux/rtpvp8 and scaletempo got moved to -good, hls needs gnutls,
celt is gone and dash + webp are new.
At the same time fix the libmms comment dependency.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
DTMF plugin moved from bad, udp plugin no longer needs IPv6 and taglib
support was missing.
Patch needed for O_CLOEXEC on uClibc / older Glibc versions.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since 0be0899bfd (mpc: bump to version 1.0.1 and license change), we
no longer patch configure.ac, so we can skip the autoreconf step.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While the idea of skipping the intermediate gcc step seems to work
fine in most situations, it causes problems with the SSP
support. Until we can figure out a proper solution for this problem,
we need to revert back to the previous solution of a three stages
build.
This reverts commit 2babed4a50.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also drop sqlite-dont-force-posix-fallocate.patch because it is fixed upstream.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
text.o: In function `execute_command':
text.c:(.text+0x7f8): undefined reference to `fork'
text.o: In function `do_int_speller':
text.c:(.text+0x3480): undefined reference to `fork'
text.c:(.text+0x34f4): undefined reference to `fork'
text.c:(.text+0x3568): undefined reference to `fork'
text.o: In function `do_alt_speller':
text.c:(.text+0x3914): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [nano] Error 1
[Peter: fork() only in full version, so force tiny for !mmu]
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error if !BR2_USE_MMU:
exec.o: In function `zfork':
exec.c:(.text+0x150c): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [zsh] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When we have patches touching configure.ac and hence need to set
<pkg>_AUTORECONF = YES we also have to remember to set
HOST_<pkg>_AUTORECONF = YES if we build both host and target versions,
which is often forgotten (latest case was bison).
Fix it by making the host versions of _AUTORECONF and _AUTORECONF_OPT
default to whatever the target versions are set to, similar to how we
handle a number of the other variables.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The build with gpu-viv-bin-mx6q libraries was broken since it wasn't
using "-DEGL_API_FB=1" flag which is found in egl.pc.
Signed-off-by: Fatih Aşıcı <fatih.asici@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'make clean' recipe is using variables that are not defined without
.config file, causing only a partial cleanup when the .config file is
accidentally deleted.
This patch moves those variables that do not depend on values from .config
outside the BR2_HAVE_DOT_CONFIG check, so that 'make clean' is much more
similar with and without .config.
Since HOST_DIR is determined from BR2_HOST_DIR in .config, the host
directory cannot be cleaned correctly without making assumptions, if no
.config is present. However, to cover most people's use cases, we assume
the default value of $(BASE_DIR)/host in this specific case.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Remove MB_CUR_MAX patch since it's unnecessary/insufficent for non-wchar
compilation since c29e01e61e
no-gets patch unnecessary also since it's been fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
/opt/test/buildroot/buildroot/output/host/usr/bin/arm-buildroot-uclinux-uclibcgnueabi-gcc inetd.o servtab.o builtins.o sig.o daemon.o setproctitle.o mysleep.o -o inetd
servtab.o: In function `loadconfigfile.clone.0':
servtab.c:(.text+0x98c): warning: gethostbyname is obsolescent, use getnameinfo() instead.
inetd.o: In function `main':
inetd.c:(.text+0x8a4): undefined reference to `fork'
inetd.c:(.text+0x974): undefined reference to `fork'
daemon.o: In function `daemon':
daemon.c:(.text+0xc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [inetd] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
./tmp./bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status.
./bin/arm/lmbench.a(lib_tcp.o): In function `tcp_connect/'cc8Ta2C2.o: Inmake[2]: function `*** [../bin/arm/bw_file_rd] Error 1
initialize':
lib_tcp.c:make[2]: (.text+0x208): warning: gethostbyname*** Waiting for unfinished jobs....
is obsolescent, use: getnameinfo
bw_pipe.c(): (instead..text
/+tmp0x134/)cc5yg1Q2.o: :undefined In referencefunction to`server_main `'fork:
'bw_tcp.c
.:.(./textbin+/0x298arm)/:lmbench.a (undefinedlib_timing.o )reference: Into function`fork '`
benchmp/'tmp:/
cc5yg1Q2.olib_timing.c:: (In.text function+0x34fc `)main: 'undefined:
bw_tcp.creference: (to. text`fork+0x370'
)collect2: : undefined reference to `fork'
../bin/armld returned 1 exit status/lmbench.a(lib_timing.o): In function
`benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_pipe] Error 1
make[2]: *** [../bin/arm/bw_tcp] Error 1
../bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_mmap_rd] Error 1
../bin/arm/lmbench.a(lib_timing.o): In function `benchmp':
lib_timing.c:(.text+0x34fc): undefined reference to `fork'
collect2: ld returned 1 exit status
make[2]: *** [../bin/arm/bw_mem] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
mountd-mountd.o: In function `main':
mountd.c:(.text+0x1264): undefined reference to `fork'
mountd.c:(.text+0x1320): undefined reference to `fork'
mountd-rmtab.o: In function `ha_callout':
rmtab.c:(.text+0xa8): undefined reference to `fork'
collect2: ld returned 1 exit status
make[3]: *** [mountd] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to glibc-2.18/ports/sysdeps/mips/preconfigure,
if no -mabi was passed to CFLAGS, then it defaults to -mabi=n32.
This breaks o32 and n64 builds for MIPS64. Therefore, it is
necessary to append -mabi to CFLAGS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a quite old thing, latest version is from 2009
but it is useful to applications based on xmotif.
It has been tested with buildroot on ARM/iMX6.
[Peter: pass --no-recursion to not error out in test/configure]
Signed-off-by Thierry Bultel <thierry.bultel@wanadoo.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gnupg is compiled with --enable-minimal flag. This produces a binary that only
supports ElGamal and DSA public key algorithms.
RSA has been the default for `gpg --gen-key` since 2009, so it makes sense to
be able to build a gnupg binary that supports it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since STAGING_DIR is defined as (package/Makefile.in):
STAGING_SUBDIR = usr/$(GNU_TARGET_NAME)/sysroot
STAGING_DIR = $(HOST_DIR)/$(STAGING_SUBDIR)
removing HOST_DIR will automatically remove STAGING_DIR. This patch updates
'make clean' based on this knowledge.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The plugin infrastructure is based on shared objects so it won't build
for static-only scenarios.
And the daemon uses fork() so MMU is required.
[Peter: move below suboptions]
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
./libfindtools.a(pred.o): In function `launch':
pred.c:(.text+0x240c): undefined reference to `fork'
collect2: .ld returned 1 exit status/libfindtools.a
(pred.o): In function `launch':
pred.c:(.text+0x240c): undefined reference to `fork'
collect2: ld returned 1 exit status
make[4]: *** [oldfind] Error 1
make[4]: *** Waiting for unfinished jobs....
make[4]: *** [find] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix below build error:
logrotate.o: In function `switch_user_permanently':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:129: undefined reference to `fork'
logrotate.o: In function `removeLogFile':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:431: undefined reference to `fork'
logrotate.o: In function `mailLog':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:597: undefined reference to `fork'
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:615: undefined reference to `fork'
logrotate.o: In function `compressLogFile':
/opt/test/buildroot/buildroot/output/build/logrotate-3.8.4/logrotate.c:533: undefined reference to `fork'
collect2: ld returned 1 exit status
make[1]: *** [logrotate] Error 1
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Also drop diffutils-gets-no-longer-exists-in-eglibc-2.16.patch because
gets is unconditionally undefined now so we don't need the patch.
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
SABRE Board for Smart Devices (SABRE-SD) is Freescale's evaluation board
based on the i.MX 6Quad ARM Cortex-A9 applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com
and SW release 3.0.35_4.1.0.
[Peter: add comments to defconfig]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
i.MX6 SoloLite EVK is Freescale's evaluation board based on
the i.MX6 SoloLite applications processor.
This defconfig is based off Freescale "official" git repo on git.freescale.com
and SW release 3.0.35_4.1.0.
[Peter: comment defconfig]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It was missing the dependency on the toolchain features.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the build on ARC as well, as 2.0.17+ includes a fix
that checks for existence of 'sysctl'.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We should use our LDFLAGS when building as well. At the same time, drop the
unused CIVETWEB_LDFLAGS.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In case there are many arguments passed to the tools, the command line
can get very long, and difficult to parse visually.
For example, the Linux kernel passes a lot of arguments to gcc (at least
45, which gives 53 with our hard-coded args). Looking at such a command
line is daunting.
So, add the possibility to print each argument on its own line.
Also, enclose all args between single quotes, so the command line
can be safely copy-pasted without special chars (spaces, $) being
inrerpreted by the shell.
Add blurb about toolchain-wrapper to documentation at the same
time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to the latest cset in master for a bunch of fixes
for transconding, muxer and html5 video.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is required for building the 'crypto', 'odbc', 'ssh'
and 'ssl' Erlang applications. These apps are skipped
regardless of whether they're enabled and their dependencies
can be met if this environment variable isn't set.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 'make help' lines for generating the manual did not consider ePub
correctly. Instead of providing a limitative list for 'make manual', the
text is changed into 'all formats'.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When generating the manual, you see following messages:
>>> Generating HTML manual...
>>> Generating Split HTML manual...
>>> Generating PDF manual...
>>> Generating Text manual...
>>> Generating EPUB manual...
and with this patch the capitalization is changed so that it becomes:
>>> Generating HTML manual...
>>> Generating split HTML manual...
>>> Generating PDF manual...
>>> Generating text manual...
>>> Generating ePUB manual...
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The -s option is only mandatory for the charmap,
else the filename is always empty and nothing
is generated.
Signed-off-by: Thierry Bultel <thierry.bultel@wanadoo.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list. They have been broken for a long time, and are
not commonly used in embedded systems.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Qt translation files are currently created and moved under
$(STAGING_DIR)/usr/translations but not installed on the target.
This patch defines the translations directory to
/usr/share/qt/translations and defines a QT_INSTALL_TARGET_TRANSLATIONS
macro to deploy them from the staging directory to the target directory.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
luaposix includes a curses binding which is optional and auto-detected by autotools.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Releases are no longer named 5.1.X, just the X portion remains now.
Fixes autoreconf issues with the automake bump, however since the patch
is no longer required that's not an issue now.
[Peter: now needs IPv6]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There's no stated purpose and it breaks with automake 1.12+
If it breaks in some scenario ping me, i've got a patch to fix the
autoreconf issue and re-enable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A python library that calculates CRC checksums of the CCITT/XModem
variant.
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpci.so* is installed without +x permissions thus preventing
stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libiconv.so* and libcharset.so* are installed without +x permissions
thus preventing stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libintl.so* is installed without +x permissions thus preventing
stripping. Fix it up in the post install target hooks.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The python language bindings for ZeroMQ.
[Peter: moved version note to .mk, single toolchain deps line]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
some CMake stuff comes from LuaDist, but CMake is not the primary build infrastructure of LuaCrypto.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Disable reversed/already applied patches fallout from commit
5871b79199
Reverse patches are bad, they may unfix things with version bumps and
just sneak under the radar with pure batch mode.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes http://autobuild.buildroot.net/results/868/8687be8ec029486d9c5e2224cde542134f72884b/
The recent (d245fbb41d: apply-patches.sh: detect missing patches)
change to apply-patches.sh causes a number of regressions with packages
using downloadable tarballs of patches (typically from Debian), as
those contain additional files besides just the patches (ChangeLog's,
debian/rules, ..).
This use case is arguably abusing the _PATCH handling, but it used to
work so people might rely on it so go back to only warn about this
instead of erroring out.
At the same time reword the warning message.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make consistent the capitalization and punctuation of Signed-of-by examples.
Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Acked-by: "Samuel Martin" <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mudflap library is only useful if one uses the -fmudflap gcc
option to do more checks on pointers/arrays. This commit adds an
option to enable/disable mudflap support at the gcc level. By default,
it is disabled, which saves a little bit of build time compared to the
default of gcc which consists in enabling mudflap support.
Since mudflap is now disabled by default, and ensured to never be enabled
on platforms where it is not available, some gcc.mk code that was used to
disable mudflap in problematic configurations can be removed.
Whether -fmudflap is used when building is left to the user.
[Peter: tweak commit text, fix white space]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The only remaining thing in toolchain-buildroot/Config.in.2 is the
inclusion of the elf2flt option. It doesn't really make sense to have
a separate Config.in file for that, so let's move this to
toolchain-buildroot/Config.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit refactors how Stack Smashing Protection support is handled
in Buildroot:
*) It turns the BR2_TOOLCHAIN_BUILDROOT_USE_SSP option into an option
that only enables the SSP support in uClibc, when using the internal
toolchain backend.
*) It adds an hidden BR2_TOOLCHAIN_HAS_SSP option that gets enabled
when the toolchain has SSP support. Here we have the usual dance:
glibc/eglibc in internal/external backend always select this
option, in the case of uClibc/internal, it gets selected when
BR2_TOOLCHAIN_BUILDROOT_USE_SSP is enabled, in the case of
uClibc/external, there is a new configuration option that the user
must select (or not) depending on whether the toolchain has SSP
support.
*) It adds a new options BR2_ENABLE_SSP in the "Build options" menu,
to enable the usage of SSP support, by adding
-fstack-protector-all to the CFLAGS.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The HOST_GCC_CONFIGURE_SYMLINK creates a symbolic link
$(@D)/build/configure -> $(@D)/configure for each build step of
gcc. However, it was only using 'ln -s' and not 'ln -sf', which was
causing problems when doing 'make host-gcc-final-reconfigure' for
example, because the configure commands (including this macro) are
being re-executed, but the symbolic link already exists.
Changing this symbolic link creation to 'ln -sf' fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each stage of the gcc build needs to make a small dance before the
configuration step to create a build sub-directory and a symbolic link
to the configure script. The common gcc.mk had a
HOST_GCC_CONFIGURE_SYMLINK already used by the gcc-initial and
gcc-intermediate steps, but the gcc-final step wasn't using it.
This commit fixes this inconsistency, and therefore removes the
HOST_GCC_FINAL_CONFIGURE_SYMLINK macro.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support for eglibc 2.17 was added to the internal toolchain
backend for 2013.08. This commit now adds glibc 2.18 support to the
internal toolchain backend.
Since the building procedure is very similar to the one of eglibc, we
have renamed the 'eglibc' package to 'glibc', and made it capable of
handling either glibc or eglibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The option to enable C++ support was still located in
toolchain/toolchain-buildroot/Config.in.2, with misc other toolchain
options. It seems more logical to have this option with the other
options to select the languages supported by the cross-compiler, so we
move it next to the Fortran/Objective-C options in
package/gcc/Config.in.host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Objective-C support in the gcc package by making
sure that the runtime Objective-C library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_OBJC option rather than the non-existing
BR2_GCC_CROSS_OBJC option, to decide whether Objective-C support
should be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit fixes the Fortran support in the gcc package by making
sure that the runtime Fortran library is properly installed to the
target.
It also takes this opportunity to slightly reword the Config.in option
help text, to no longer mention gcc < 4.2 since they are no longer
supported in Buildroot, and to have a more meaningful explanation.
Finally, it fixes the gcc-final.mk code to use the correct
BR2_INSTALL_FORTRAN option rather than the non-existing
BR2_GCC_CROSS_FORTRAN option, to decide whether Fortran support should
be enabled or not in the cross-compiler.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When NPTL support was introduced, gcc required a three stages build
process. Since gcc 4.7, this is no longer necessary, and it is
possible to get back to a two stages build process. This patch takes
advantage of this, by doing a two stages build process when possible.
We introduce a few hidden kconfig options:
* BR2_GCC_VERSION_NEEDS_THREE_STAGE_BUILD, which is set by the gcc
Config.in logic to indicate that the compiler might need a three
stages build. Currently, all versions prior to 4.7.x are selecting
this kconfig option.
* BR2_TOOLCHAIN_LIBC_NEEDS_THREE_STAGE_BUILD, which indicates whether
the C library might need a three stages build. This is the case for
eglibc, and uClibc when NPTL is enabled.
* BR2_TOOLCHAIN_NEEDS_THREE_STAGE_BUILD finally is enabled when both
of the previous options are enabled. It indicates that a three
stages build is actually needed.
In addition to those options, the uClibc/gcc build logic is changed to
use only a two stages build process when possible.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason, the eglibc.mk file was trying to install libstdc++.so
from eglibc to the target. But the C++ standard library is provided by
GCC, not by the C library.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The TARGET_{CC,CXX,LD,...} variables no longer contain any --sysroot
option, since we're now using a toolchain wrapper for external
toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As discussed on the list, devtmpfs is quite a bit nicer default than
the old static /dev, so change it.
Notice that you NEED to enable CONFIG_DEVTMPFS / CONFIG_DEVTMPFS_MOUNT
in the kernel configuration if you manually build a kernel outside
buildroot, otherwise the rootfs won't work.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces a specific BR2_TARGET_GENERIC_GETTY configuration flag.
This eliminates the need for checking if BR2_TARGET_GENERIC_GETTY_PORT is an
empty string or not. It also allows hiding various getty options when getty
isn't enabled.
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The "patch" command returns an error code only if patches fail
to apply. Therefore the pipleline "cat <patchfile> | patch ..."
does not fail, even if <patchfile> is missing. Fix this by
adding an explicit check for patch file existence.
Based on feedback from buildroot mailing list, also change the
existing check for unsupported patch format into a fatal error.
Signed-off-by: Ralph Siemsen <ralphs@netwinder.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(BUILD_DIR)/.root rule is executed as part of the 'dirs'
target. The 'dirs' target is re-executed at every execution of 'make
external-deps', and make external-deps explicitly tells make to ignore
targets that have already been made (through the -B option). This
means that the $(BUILD_DIR)/.root rule has to be idempotant, which was
not the case this the introduction of the lib32/lib64 symbolic link.
Running 'make external-deps' three times in a row was sufficient to
trigger an error due to symbolic links being incorrectly created. This
patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Automatic IPv6 Connectivity Configuration Utility for users of a
IPv6 tunnel broker, developed by sixxs.net
[Peter: drop strip patch, pass TARGET_CONFIGURE_OPTS]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: fix C++ dependency and trailing spaces, drop ';' from fixup hook]
Signed-off-by: Matt Weber <mlweber1@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
tcping does a TCP connect to the given ip/port combination. The user can
specify a timeout in seconds. This is useful in shell scripts running in
firewalled environments. Often SYNs are just being dropped by firewalls,
thus connection establishment will be retried several times (for minutes)
until a TCP timeout is reached. With tcping it is possible to check first
if the desired port is reachable and then start connection establishment.
http://www.linuxco.de/tcping/tcping.html
[Peter: wrap help text, pass TARGET_LDFLAGS]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upgrade to the latest uclinux CVS snapshot, gives us blackfin support.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The plugin infrastructure is based on shared objects so it won't build
for static-only scenarios.
And the daemon uses fork() so MMU is required.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building for nommu flat targets the CFLAGS/CXXFLAGS/LDFLAGS must be
adjusted accordingly.
For gcc this means passing along -Wl,-elf2flt to signal the linker.
For ld this means -elf2flt.
Also correct the error in STACKSIZE settings from commit 9edf482d which
is setting gcc flags as ld flags and will surely fail (no package uses
it at the moment so it was never seen).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add host-elf2flt to the gcc common dependencies so we get it built after
binutils but before gcc/uclibc since it's required for all packages and
in some uClibc configuration scenarios.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The support is for pserver mode anonymous CVS.
source-check is based on login since many servers don't support or have
ls/rls disabled.
Usage is pretty straightforward.
PKG_SITE defines the site hostname and remote directory.
The module is defined by the bare package name.
Version is date based.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Triggered by the 'some comment required here', this patch updates the Config.in
comments for the ubifs filesystem image options. This includes:
- 'erase block' --> 'eraseblock' (following mtd online documentation)
- remove 'UBI' prefix to make options uniform. Sometimes the option is not a
property of UBI but rather of the flash. Also, line up the name of the option
with the help of mkfs.ubifs.
- add help text on all options, referring to the mkfs.ubifs/ubinize options
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A port knocking implementation with daemon and user application.
[Peter: drop trailing newline in Config.in]
Signed-off-by: Michael Rommel <rommel@layer-7.net>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Similar to how we do it for _PATH / _SYSROOT_DIR. Buildroot gets fairly
confused if the user has set up a custom PKG_CONFIG_LIBDIR, so ensure
it gets unset.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
DEPMOD is already specified in LINUX_MAKE_FLAGS, and is no longer located
in HOST_DIR/usr/sbin after the move to host-kmod, so drop it from here.
Reported-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In BR sub-directory boot/ linux/ and package/ there are a few .mk files which
aren't <package>.mk files. These files shouldn't be taken into account
in package statistics.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 2eb995759 "vsftpd: needs mmu" adds "depends on BR2_TOOLCHAIN_HAS_THREADS".
The build error is:
sysutil.c:(.text+0x37ac): undefined reference to `fork'
Thus it should depend on BR2_USE_MMU rather than BR2_TOOLCHAIN_HAS_THREADS.
Cc: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Axel Lin <axel.lin@ingics.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host-kmod version of depmod gets installed into HOST_DIR/sbin, so
adjust the path we use to refer to it in linux.mk
Reported-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is required to build custom port drivers/NIFs or code that
uses erl_interface.
Signed-off-by: Hans Bulfone <hans@nil.at>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Parallel 'make install' seems to deadlock here (make 3.81). Work around it
by disabling parallel make for the install step.
We only disable parallel make for the install step, as the build step works
with parallel make, and webkit is a huge package, so build time goes up
significantly with make -j1.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also apply the following patches:
- upstream fix for 32-bit autotools
- upstream fix for conditional gstreamer build of gtklauncher
- upstream fix for detecting the latest harfbuzz
- Update existing patch for disabling docs
- Update existing patch for execinfo_h
- upstream patch for the MIPS DFG support. This fixes
compilation problems on MIPS.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: leave change xz tarball format to not end up with circular deps]
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding configuration options that if libssh2 is selected, compile libcurl
with --with-ssh config flag.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unless it was a group of sub-packages, packages was never regrouped by
category. multimedia/ was an exception to this rule.
This patch move packages/multimedia/ sub-directories to packages/. It
keeps two subdirectories for gstream 0.10 and gstreamer 1.X.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also cleaned the package makefile up by removing explicitly naming
the source along with moving the configure of the package down below
the standard package declarations.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Lua website says:
"Like most names, it should be written in lower case with an initial capital,
that is, "Lua". Please do not write it as "LUA", which is both ugly and
confusing, because then it becomes an acronym with different meanings for
different people."
http://www.lua.org/about.html
So, let's honor this request in buildroot.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, $(PKG)_PATCH allow only to download patches from same URL than tarball.
This patch allow to detect when plain URL are used in $(PKG)_PATCH and correctly
handle them.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If xzcat is not present on the host system, buildroot bails out early asking
the developer to install it (xzcat is now a DL_TOOLS_DEPENDENCY)
Conversely, when BR2_TARGET_ROOTFS_CPIO_XZ is enabled, then host-xz is a
build dependency, and no manual action is required from the developer.
Because the second approach is nicer, also build host-xz when xzcat is not
available, using the host-prerequisite and suitable-host-pkg mechanisms,
already used for tar.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to simplify determining the right extractor tool for a given
file type, this patch introduces a make function 'suitable-extractor'.
Its usage is $(call suitable-extractor,filename), and it returns the
path to the suitable extractor.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream has a large number of patches lined up for the next 0.9.33.x bugfix
release;
http://git.uclibc.org/uClibc/log/?h=0.9.33
Add them here, as atleast some of them are quite critical (E.G. the eventfd
issue gets triggered by recent glib versions).
I've skipped the microblaze and xtensa fixes as we don't currently support
those with 0.9.33.2.
Drop uclibc-0002-Add-definition-of-MSG_WAITFORONE-and-MSG_CMSG_CMSG_CLOEXE.patch
as that is a subset of uclibc-0035-socket.h-pull-socket_type.h-from-eglibc.patch
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Removed patches that were are now in version 2.23 of util-linux along with
fixed up other patches so they apply cleanly.
Signed-off-by: Ryan Barnett <rjbarnet@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, all target options lie in the top-level menu.
This looks a bit clumsy, since all other options are neatly
folded into their own sematic sub-menus each.
Move the target option into their own sub-menu too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump for a slew of USB-related and other fixes.
The bcmrpi defconfig is a huge beast with lots of superfluous drivers.
The brcmrpi_quick defconfig is a stripped down minimalist defconfig with
all that is needed to bring up a RPi with complete HW support, and
nothing superfluous, which is what we need for a board's defconfig in
buildroot.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes and improvements for USB, audio sync, camera support,
codecs, HDMI framerate and audio, and GPU freezes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In the past there may have been a very good reason to refer to 'buildroot2', but
these days it's just odd.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for gnutls, nss and polarssl backends.
Add support for libidn and zlib.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Brings a number of fixes, and most importantly no longer tries to figure
out if the tree contains uncommitted changes when using svn, as that can
be very slow.
This only syncs with setlocalversion as of 2.6.34 as later kernel versions
aren't directly compatible with our use cases since 09155120c (kbuild:
Clean up and speed up the localversion logic).
We still have one delta from the kernel version (setlocalversion: fix i18n
issue with svn), as that has only later been fixed in the kernel version.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
So we don't end up pulling in host-busybox (which doesn't exist) if
KMOD_TOOLS is enabled.
Reported-by: Sagaert Johan <sagaert.johan@skynet.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Looks like this was lost in 20d4792e.
[Peter: use _INSTALL_INIT_SYSV, explicitly delete script on uninstall]
Signed-off-by: Peter Sanford <psanford@nearbuysystems.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The documentation of older GCC versions (E.G. 4.3.x) contain constructs
that are no longer accepted by recent (5.x) versions of makeinfo, breaking
the build.
The documentation isn't really needed, and takes up extra space/build time,
so work around it by disabling documentation, like we had before the
conversion of the toolchain to the package infrastructure.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since kmod 14, the support for building a static library has been
removed completely from kmod. Therefore, we mark kmod as
!BR2_PREFER_STATIC_LIB, as well as all its reverse dependencies, which
includes the option to use the "udev" /dev management method.
[Peter: show comment for udev when BR2_PREFER_STATIC_LIB is enabled]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libpthread.so has a special stripping condition to preserve parts of
it that are needed for debugging. However, due to the usage of 'xargs'
instead of 'xargs -r', the strip command is executed regardless of
whether a libpthread.so file is found or not. This leads to a big
error message being displayed in static-only builds, because strip is
executed without a file argument. Thanks to the '|| true', the build
continues, but still shows a big error message in the middle, which is
not nice.
By using 'xargs -r', we avoid the strip command from being executed
when 'find' doesn't find any match. We also remove the '|| true' to
catch other real errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit removes the module-init-tools package and adds the
relevant Config.in.legacy entries to ease the migration for users.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since module-init-tools is deprecated, we now want to use kmod instead
for the installation of modules during the kernel build process. In
order to do this, we need to be able to build a host variant of kmod,
which is want this patch allows to do.
Note that only the depmod tool is installed on the host, since that's
the only one likely to be used on the host in a cross-compilation
context.
[Peter: needs AUTORECONF for the host as well. Fix comment while we're at it]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KMOD_INSTALL_TOOLS macro uses a non-conventional indentation. This
commit fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to be sure that we just deal with the includes related with
the actual package described into libffi.mk it is better to explicitly
specify the version of the libffi we deal with into the post install
hook.
As dev files are deprecated in target rootfs target post install
hook was also deleted.
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libsecret is a library for storing and retrieving passwords
and other secrets. It communicates with the "Secret Service"
using DBus. gnome-keyring and ksecretservice are both
implementations of a Secret Service.
libsecret replaces libgnome-keyring.
https://wiki.gnome.org/Libsecret
[Peter: also needs host-intltool]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds very basic support to build for the Nios II
architecture. Toolchain support is still missing and instead
we need to use an external custom toolchain.
Notice that this architecture had been previously removed in
Buildroot 2010.05-rc1 release (as explained in the CHANGES file)
and this commit adds it back.
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Ezequiel Garcia <ezequiel@vanguardiasur.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make it use external instead of bundled libevent - it's better for size
reasons (avoiding possible duplication) and security reasons (easier to
upgrade one global library than possibly two or more, and generally
upstream would probably be more responsive to those).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON library can either be compiled without XML support, with XML
support provided by Expat, or with XML support provided by
libxml2. Until now, to represent this, a Kconfig 'choice..endchoice'
was used. Unfortunately, another package cannot 'select' one of the
possible choices. So for example, a package such as 'rpm', or the
to-be-added 'subversion' package could not select their dependencies,
they had to do a 'depends on !BR2_PACKAGE_NEON_NOXML', which is not
how Buildroot handles library dependencies in general.
So, this commit replaces the 'choice...endchoice' block with simply
two configuration options that are mutually exclusive. The option
names are not changed, so no Config.in.legacy addition is needed.
An hidden option BR2_PACKAGE_NEON_XML is provided, so that packages
that need XML support in NEON but don't care whether it's provided by
Expat or libxml2 can simply select BR2_PACKAGE_NEON_XML.
The rpm package is updated accordingly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Linux Containers (LXC), provides the ability to group and isolate
of a set of processes in a jail by virtualizing and accounting the
kernel resources. It is similar to Linux-Vserver or Openvz.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add the duma memory debugging library. This is based on an earlier
patch by Baruch Siach, with minor changes to build for latest
buildroot sources.
[Thomas P: misc cleanups, drop non-C++ support as it wasn't compiling,
added thread dependency.]
Signed-off-by: Reuben Dowle <reuben.dowle@4rf.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Originally, the <pkg>-rebuild and <pkg>-reconfigure targets were meant
to restart the build of the package from a given step (build for
<pkg>-rebuild and configure for <pkg>-reconfigure) and then re-create
the entire root filesystem.
However, further discussion from the community has shown that this is
not really the desired behavior: we instead want <pkg>-rebuild and
<pkg>-reconfigure to only take care of rebuilding the given package,
and not the entire root filesystem.
People willing to rebuild this package and the root filesystem can do:
make <pkg>-rebuild all
[Thomas P: rewrite commit log, since it's not fixing a bug, but
instead changing what was an intended behavior. ]
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
An MVC web framework for Lua
[Thomas P: add patch to fix installation procedure, and use the
provided Makefile for installation. Remove build-time dependency on
wsapi since there's nothing to build in 'orbit'. Remove run-time
dependency on 'rings', since it's not clear why Orbit would depend on
that.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Luasql is a uniform frontend for multiple DB backends.
[Thomas P: update version to 2.3.0 available from Github, as suggested
by François Perrad. Fix .mk header. Use a LUASQL_MAKE_FLAGS variable,
which is more commonly used.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
LuaSec is a Lua binding for OpenSSL library to provide TLS/SSL
communication.
[Thomas: adjust header in .mk file, add missing 'mkdir -p' before
installation, remove useless quotes.]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: change license to GPLv2+, slightly reword Config.in
description, add a BR2_arm dependency.]
Signed-off-by: Paul B. Henson <henson@acm.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch moves the host-ccache build target from BASE_TARGETS in Makefile
to an actual host prerequisite in support/dependencies. This causes
host-ccache to be built as part of the dependencies, before any real package
is built.
Since the dependencies are built without ccache anyway, there is no need to
set HOST_CCACHE_CONF_ENV anymore.
Suggested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch forces the plain host compiler to be used during the building of
dependencies, without ccache as it is not yet built.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Since the addition of root password setting support in buildroot, there have
been a few bug reports in this area ([1], [2]). In these cases, the system
mkpasswd did either not work, or did not provide the options we expect, like
-m <method>.
This patch adds a mkpasswd host package, based on the sources from whois. When
a non-empty root password is set, this package is used as a dependency.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
[1] http://lists.busybox.net/pipermail/buildroot/2013-July/075771.html
[2] http://lists.busybox.net/pipermail/buildroot/2013-July/075869.html
[Thomas P: use $(INSTALL) instead of install, put -lcrypt at the end
of build command line to allow gcc to find the crypt() function in
lcrypt.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On architectures that lack a MMU (like blackfin) uclibc just undefined
ARCH_HAS_MMU which disabled ARCH_USE_MMU.
But for other architectures which may or may not have one like ARM we
need to set this according to user choice.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Set busybox .config CONFIG_NOMMU appropiately and streamline this new
setting with the previous BUSYBOX_DISABLE_MMU_APPLETS in a single
BUSYBOX_SET_MMU definition (since it's not just applets now).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a new package for the trace-cmd tool. This tool is a
command line front end of ftrace. It collects traces on your target.
You can analyse these traces on the target or on the host via the gui
"kernel shark".
[Thomas: use TARGET_CONFIGURE_OPTS, define _GNU_SOURCE to get
O_CLOEXEC definition on uClibc, add thread and largefile
dependencies.]
Signed-off-by: Pierre Floury <pierre.floury@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
bootcmd=mmc dev ${mmcdev}; if mmc rescan; then if run loadbootscript; then run bootscript; else if run loaduimage; then run mmcboot; else run netboot; fi; fi; else run netboot; fi
bootdelay=3
bootscript=echo Running bootscript from mmc ...; source
netboot=echo Booting from net ...; run netargs; if test ${ip_dyn} = yes; then setenv get_cmd dhcp; else setenv get_cmd tftp; fi; ${get_cmd} ${uimage}; if test ${boot_fdt} = yes || test ${boot_fdt} = try; then if ${get_cmd} ${fdt_addr} ${fdt_file}; then bootm ${loadaddr} - ${fdt_addr}; else if test ${boot_fdt} = try; then bootm; else echo WARN: Cannot load the DT; fi; fi; else bootm; fi;
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
