Update for 2020.02.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.gitlab-ci.yml

@@ -54,12 +54,6 @@ check-package:
                 tail -200 build.log
                 exit 1
             }
-        - |
-            ./support/scripts/boot-qemu-image.py "${DEFCONFIG_NAME}" > >(tee runtime-test.log) 2>&1 || {
-                echo 'Failed runtime test last output'
-                tail -200 runtime-test.log
-                exit 1
-            }
     artifacts:
         when: always
         expire_in: 2 weeks
@@ -70,7 +64,6 @@ check-package:
             - output/build/build-time.log
             - output/build/packages-file-list.txt
             - output/build/*/.config
-            - runtime-test.log
 
 .defconfig:
     extends: .defconfig_base
@@ -184,12 +177,9 @@ freescale_imx6dlsabresd_defconfig: { extends: .defconfig }
 freescale_imx6qsabreauto_defconfig: { extends: .defconfig }
 freescale_imx6qsabresd_defconfig: { extends: .defconfig }
 freescale_imx6sxsabresd_defconfig: { extends: .defconfig }
-freescale_imx6ullevk_defconfig: { extends: .defconfig }
 freescale_imx7dsabresd_defconfig: { extends: .defconfig }
 freescale_imx8mmevk_defconfig: { extends: .defconfig }
-freescale_imx8mnevk_defconfig: { extends: .defconfig }
 freescale_imx8mqevk_defconfig: { extends: .defconfig }
-freescale_imx8qmmek_defconfig: { extends: .defconfig }
 freescale_imx8qxpmek_defconfig: { extends: .defconfig }
 freescale_p1025twr_defconfig: { extends: .defconfig }
 freescale_t1040d4rdb_defconfig: { extends: .defconfig }
@@ -227,16 +217,12 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
-nanopi_neo4_defconfig: { extends: .defconfig }
 nanopi_neo_defconfig: { extends: .defconfig }
-nanopi_r1_defconfig: { extends: .defconfig }
 nexbox_a95x_defconfig: { extends: .defconfig }
 nitrogen6sx_defconfig: { extends: .defconfig }
 nitrogen6x_defconfig: { extends: .defconfig }
 nitrogen7_defconfig: { extends: .defconfig }
 nitrogen8m_defconfig: { extends: .defconfig }
-nitrogen8mm_defconfig: { extends: .defconfig }
-nitrogen8mn_defconfig: { extends: .defconfig }
 odroidxu4_defconfig: { extends: .defconfig }
 olimex_a10_olinuxino_lime_defconfig: { extends: .defconfig }
 olimex_a13_olinuxino_defconfig: { extends: .defconfig }
@@ -246,8 +232,6 @@ olimex_a20_olinuxino_micro_defconfig: { extends: .defconfig }
 olimex_a33_olinuxino_defconfig: { extends: .defconfig }
 olimex_a64_olinuxino_defconfig: { extends: .defconfig }
 olimex_imx233_olinuxino_defconfig: { extends: .defconfig }
-olpc_xo175_defconfig: { extends: .defconfig }
-olpc_xo1_defconfig: { extends: .defconfig }
 openblocks_a6_defconfig: { extends: .defconfig }
 orangepi_lite2_defconfig: { extends: .defconfig }
 orangepi_lite_defconfig: { extends: .defconfig }
@@ -317,7 +301,6 @@ raspberrypi4_64_defconfig: { extends: .defconfig }
 raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
-roc_pc_rk3399_defconfig: { extends: .defconfig }
 rock64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
@@ -331,10 +314,10 @@ snps_archs38_vdk_defconfig: { extends: .defconfig }
 socrates_cyclone5_defconfig: { extends: .defconfig }
 solidrun_clearfog_defconfig: { extends: .defconfig }
 solidrun_clearfog_gt_8k_defconfig: { extends: .defconfig }
-solidrun_macchiatobin_defconfig: { extends: .defconfig }
+solidrun_macchiatobin_mainline_defconfig: { extends: .defconfig }
+solidrun_macchiatobin_marvell_defconfig: { extends: .defconfig }
 stm32f429_disco_defconfig: { extends: .defconfig }
 stm32f469_disco_defconfig: { extends: .defconfig }
-stm32mp157a_dk1_defconfig: { extends: .defconfig }
 stm32mp157c_dk2_defconfig: { extends: .defconfig }
 toradex_apalis_imx6_defconfig: { extends: .defconfig }
 ts4900_defconfig: { extends: .defconfig }
@@ -344,17 +327,12 @@ wandboard_defconfig: { extends: .defconfig }
 warp7_defconfig: { extends: .defconfig }
 warpboard_defconfig: { extends: .defconfig }
 zynq_microzed_defconfig: { extends: .defconfig }
-zynq_qmtech_defconfig: { extends: .defconfig }
 zynq_zc706_defconfig: { extends: .defconfig }
 zynq_zed_defconfig: { extends: .defconfig }
 zynqmp_zcu106_defconfig: { extends: .defconfig }
 tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
 tests.boot.test_atf.TestATFMarvell: { extends: .runtime_test }
 tests.boot.test_atf.TestATFVexpress: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86EFI: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86LegacyBios: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86_64EFI: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86_64LegacyBios: { extends: .runtime_test }
 tests.core.test_file_capabilities.TestFileCapabilities: { extends: .runtime_test }
 tests.core.test_hardening.TestFortifyConserv: { extends: .runtime_test }
 tests.core.test_hardening.TestFortifyNone: { extends: .runtime_test }
@@ -390,8 +368,6 @@ tests.init.test_busybox.TestInitSystemBusyboxRoNet: { extends: .runtime_test }
 tests.init.test_busybox.TestInitSystemBusyboxRw: { extends: .runtime_test }
 tests.init.test_busybox.TestInitSystemBusyboxRwNet: { extends: .runtime_test }
 tests.init.test_none.TestInitSystemNone: { extends: .runtime_test }
-tests.init.test_openrc.TestInitSystemOpenrcRoFull: { extends: .runtime_test }
-tests.init.test_openrc.TestInitSystemOpenrcRwFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoIfupdown: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoNetworkd: { extends: .runtime_test }
@@ -404,7 +380,6 @@ tests.package.test_crudini.TestCrudiniPy3: { extends: .runtime_test }
 tests.package.test_docker_compose.TestDockerCompose: { extends: .runtime_test }
 tests.package.test_dropbear.TestDropbear: { extends: .runtime_test }
 tests.package.test_glxinfo.TestGlxinfo: { extends: .runtime_test }
-tests.package.test_gst1_python.TestGst1Python: { extends: .runtime_test }
 tests.package.test_ipython.TestIPythonPy3: { extends: .runtime_test }
 tests.package.test_libftdi1.TestPythonPy2Libftdi1: { extends: .runtime_test }
 tests.package.test_libftdi1.TestPythonPy3Libftdi1: { extends: .runtime_test }
@@ -422,8 +397,6 @@ tests.package.test_lua_gd.TestLuaLuaGD: { extends: .runtime_test }
 tests.package.test_lua_gd.TestLuajitLuaGD: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuaHttp: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuajitHttp: { extends: .runtime_test }
-tests.package.test_lua_lyaml.TestLuaLuaLyaml: { extends: .runtime_test }
-tests.package.test_lua_lyaml.TestLuajitLuaLyaml: { extends: .runtime_test }
 tests.package.test_lua_sdl2.TestLuaLuaSDL2: { extends: .runtime_test }
 tests.package.test_lua_sdl2.TestLuajitLuaSDL2: { extends: .runtime_test }
 tests.package.test_lua_utf8.TestLuaUtf8: { extends: .runtime_test }
@@ -445,7 +418,6 @@ tests.package.test_luasyslog.TestLuajitLuasyslog: { extends: .runtime_test }
 tests.package.test_luvi.TestLuvi: { extends: .runtime_test }
 tests.package.test_lxc.TestLxc: { extends: .runtime_test }
 tests.package.test_lzlib.TestLuaLzlib: { extends: .runtime_test }
-tests.package.test_netdata.TestNetdata: { extends: .runtime_test }
 tests.package.test_openjdk.TestOpenJdk: { extends: .runtime_test }
 tests.package.test_opkg.TestOpkg: { extends: .runtime_test }
 tests.package.test_perl.TestPerl: { extends: .runtime_test }
@@ -453,11 +425,9 @@ tests.package.test_perl_class_load.TestPerlClassLoad: { extends: .runtime_test }
 tests.package.test_perl_dbd_mysql.TestPerlDBDmysql: { extends: .runtime_test }
 tests.package.test_perl_encode_detect.TestPerlEncodeDetect: { extends: .runtime_test }
 tests.package.test_perl_gdgraph.TestPerlGDGraph: { extends: .runtime_test }
-tests.package.test_perl_html_parser.TestPerlHTMLParser: { extends: .runtime_test }
 tests.package.test_perl_io_socket_multicast.TestPerlIOSocketMulticast: { extends: .runtime_test }
 tests.package.test_perl_io_socket_ssl.TestPerlIOSocketSSL: { extends: .runtime_test }
 tests.package.test_perl_libwww_perl.TestPerllibwwwperl: { extends: .runtime_test }
-tests.package.test_perl_lwp_protocol_https.TestPerlLWPProtocolhttps: { extends: .runtime_test }
 tests.package.test_perl_mail_dkim.TestPerlMailDKIM: { extends: .runtime_test }
 tests.package.test_perl_x10.TestPerlX10: { extends: .runtime_test }
 tests.package.test_perl_xml_libxml.TestPerlXMLLibXML: { extends: .runtime_test }
@@ -469,6 +439,7 @@ tests.package.test_python_argh.TestPythonPy2Argh: { extends: .runtime_test }
 tests.package.test_python_argh.TestPythonPy3Argh: { extends: .runtime_test }
 tests.package.test_python_attrs.TestPythonPy2Attrs: { extends: .runtime_test }
 tests.package.test_python_attrs.TestPythonPy3Attrs: { extends: .runtime_test }
+tests.package.test_python_autobahn.TestPythonPy2Autobahn: { extends: .runtime_test }
 tests.package.test_python_autobahn.TestPythonPy3Autobahn: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy2Automat: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy3Automat: { extends: .runtime_test }
@@ -489,7 +460,7 @@ tests.package.test_python_cryptography.TestPythonPy3Cryptography: { extends: .ru
 tests.package.test_python_django.TestPythonPy3Django: { extends: .runtime_test }
 tests.package.test_python_gitdb2.TestPythonPy2Gitdb2: { extends: .runtime_test }
 tests.package.test_python_gitdb2.TestPythonPy3Gitdb2: { extends: .runtime_test }
-tests.package.test_python_gobject.TestPythonPy3Gobject: { extends: .runtime_test }
+tests.package.test_python_gobject.TestPythonPy2Gobject: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy2Incremental: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy3Incremental: { extends: .runtime_test }
 tests.package.test_python_passlib.TestPythonPy2Passlib: { extends: .runtime_test }
@@ -509,12 +480,12 @@ tests.package.test_python_treq.TestPythonPy2Treq: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy3Treq: { extends: .runtime_test }
 tests.package.test_python_twisted.TestPythonPy2Twisted: { extends: .runtime_test }
 tests.package.test_python_twisted.TestPythonPy3Twisted: { extends: .runtime_test }
+tests.package.test_python_txaio.TestPythonPy2Txaio: { extends: .runtime_test }
 tests.package.test_python_txaio.TestPythonPy3Txaio: { extends: .runtime_test }
 tests.package.test_python_txtorcon.TestPythonPy2Txtorcon: { extends: .runtime_test }
 tests.package.test_python_txtorcon.TestPythonPy3Txtorcon: { extends: .runtime_test }
 tests.package.test_python_ubjson.TestPythonPy2Ubjson: { extends: .runtime_test }
 tests.package.test_python_ubjson.TestPythonPy3Ubjson: { extends: .runtime_test }
-tests.package.test_redis.TestRedis: { extends: .runtime_test }
 tests.package.test_rings.TestLuaRings: { extends: .runtime_test }
 tests.package.test_rings.TestLuajitRings: { extends: .runtime_test }
 tests.package.test_rust.TestRust: { extends: .runtime_test }

.gitlab-ci.yml.in

@@ -54,12 +54,6 @@ check-package:
                 tail -200 build.log
                 exit 1
             }
-        - |
-            ./support/scripts/boot-qemu-image.py "${DEFCONFIG_NAME}" > >(tee runtime-test.log) 2>&1 || {
-                echo 'Failed runtime test last output'
-                tail -200 runtime-test.log
-                exit 1
-            }
     artifacts:
         when: always
         expire_in: 2 weeks
@@ -70,7 +64,6 @@ check-package:
             - output/build/build-time.log
             - output/build/packages-file-list.txt
             - output/build/*/.config
-            - runtime-test.log
 
 .defconfig:
     extends: .defconfig_base

CHANGES

@@ -1,240 +1,3 @@
-2020.05, released June 1st, 2020
-
-	Various fixes.
-
-	Updated/fixed packages: arm-trusted-firmware, gcc, mp4v2, fmc,
-	fmlib, glib-networking, libusb-compat, linux, qt5webengine,
-	sysrepo, wampcc, xen
-
-2020.05-rc3, released May 29th, 2020
-
-	Fixes all over the tree.
-
-	Infrastructure: Support checking download hashes for packages
-	coming from Subversion.
-
-	Defconfigs: Increase boot partition size to 64MB for Freescale
-	boards to allow space for bigger kernels.
-
-	Updated/fixed packages: audit, bind, dovecot, efl, erlang,
-	ffmpeg, fio, gerbera, gnupg, leveldb, lrzip, ltrace, matio,
-	mesa3d, mp4v2, prosody, qemu, qt5declarative, speexdsp,
-	systemd, tremor, uboot-tools, unbound, wireshark
-
-	Removed packages: wiringpi
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12361: Init system (systemd) kills login on Raspberry Pi Zero
-	#12686: recipe for target 'install_dev' failed (libcrypto.so..)
-
-2020.05-rc2, released May 22nd 2020
-
-	Fixes all over the tree.
-
-	U-Boot: Support building with Python 3.x instead of Python
-	2.x. Since U-Boot 2020.01, various U-Boot build scripts use
-	Python 3.x instead of Python 2.x, so add an option to pull in
-	host-python3 rather than host-python. Also fix a number of
-	defconfigs to use this new option.
-
-	Updated/fixed packages: apparmor, binutils, bison, brltty,
-	c-icap, cegui, checkpolicy, clamav, crda, cvs, docker-cli,
-	docker-engine, domoticz, elf2flt, exfatprogs, fakeroot,
-	ffmpeg, freerdp, gcc, glibc, gnuconfig, irrlicht, kmod,
-	libexif, libpam-tacplus, libssh2, libv4l, libvncserver,
-	localedef, lrzip, mariadb, matchbox, mbuffer, mesa3d,
-	mesa3d-headers, meson, netsniff-ng, openldap, openocd,
-	optee-os, p7zip, paho-mqtt-c, php, piglit, pigz,
-	python-argon2-cffi, python-attrs, python-future,
-	python-markdown, python-pycryptodomex, python-pyqt5, qt5base,
-	rpi-firmware, rustc, squashfs, squid, stella, suricata,
-	systemd, uacme, uclibc, util-linux, vboot-utils
-
-	New packages: python3-pyelftools
-
-	Removed packages: ezxml, mtdev2tuio, python-pycrypto
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#10551: PowerPC SPE and Musl
-	#12256: package tar is outdated (1.29 is 3 years old)
-	#12271: python-iptables runtime dependencies
-	#12321: host-generic-package: PKG_DL_OPTS not used for host package
-	#12391: CMake-based host package fails to include output/host/include
-	#12431: ethernet no detected on nanopi neo 2
-	#12521: RISCV RV32IA selected, RV64GC output
-	#12586: avahi failure
-	#12596: host-e2fsprogs: tune2fs incompatibility on older glibc..
-	#12611: ntp hash is not matching with upstream 4.2.8p13
-	#12626: PHP missing header files within 2020.02
-	#12631: glibc support Power-PC SPE
-	#12656: bison fails to relocate with relocate-sdk.sh
-	#12661: cups problems in buildroot
-	#12686: recipe for target 'install_dev' failed (libcrypto.so:..
-	#12691: host-rust build fails
-	#12761: Buildroot fails when building GCNano binaries for the STM..
-	#12786: Systemd spawns two getty processes when the getty port..
-	#12806: There are multiple issues in buildroot that faults cups..
-	#12826: nodejs-12.16.1: error: 'uv_sleep' was not declared in..
-	#12831: RPI-firmware package: DTB-overlay dependency
-	#12836: libunwind: package does not show up in menuconfig for..
-	#12841: util-linux/sfdisk 2.35.1 fails on sector-size header
-	#12866: should we be disabling bash executable path caching?
-	#12886: GMP built in wrong order (?)
-	#12891: QEMU, libvirt-bin, qemu-kvm Package Support required
-	#12901: GStreamer doesn't build on 2020-05 rc1 with GObject..
-	#12906: qt PrefixPath is wrong on 2020.05-rc1
-	#12921: nodejs-12.16.1: error: overriding 'virtual icu_65::..
-
-2020.05-rc1, released May 7th 2020
-
-	Addition of support for gobject-introspection: both the
-	gobject-introspection package itself, but also introspection
-	support was enabled in a number of other packages.
-
-	Support for Qt 5.6 was dropped as its support was dropped
-	upstream, only one version of Qt is supported at the moment:
-	Qt 5.14.2.
-
-	Addition of support for the apparmor Linux security module, by
-	adding the necessary user-space packages.
-
-	Addition of a qmake package infrastructure, now used by most
-	Qt-related packages.
-
-	The Luarocks package infrastructure has been extended to
-	support build host packages.
-
-	The package infrastructure was improved to allow each package
-	to indicate the Linux kernel configuration options it needs.
-
-	Addition of support for generating filesystem images using the
-	EROFS filesystem.
-
-	The logic that calculates the list of files installed by each
-	package was reworked to be compatible with the top-level
-	parallel build functionality.
-
-	Addition of a package for a pre-compiled ARM32 bare-metal
-	toolchain, which can be used to build ARM32 code in ARM64
-	configurations, such as firmware/bootloader code.
-
-	The Qemu defconfigs are now boot-tested in Qemu as part of the
-	Gitlab continuous integration.
-
-	Toolchain: gcc 9.x bumped to 9.3.0, gcc 8.x bumped to 8.4.0,
-	gdb bumped to 8.3.1.
-
-	New packages: apcupsd, apparmor, arm-gnu-a-toolchain, bearssl,
-	belle-sip, belr, cage, chartjs, erofs-utils, exfatprogs,
-	gobject-introspection, ibm-sw-tpm2, imx-seco, jbig2dec,
-	libapparmor, libiberty, libfuse3, libtextstyle, libudfread,
-	libuhttpd, libuwsc, lua-lyaml, matio, mbuffer, netdata,
-	openfpgaloader, perl-i18n, perl-locale-maketext-lexicon,
-	perl-lwp-protocol-https,
-	perl-mojolicious-plugin-authorization,
-	perl-mojolicious-plugin-cspheader,
-	perl-mojolicious-plugin-i18n,
-	perl-mojolicious-plugin-securityheader, perl-mozilla-ca,
-	perl-path-class, pistache, pkcs11-helper, prelink-cross,
-	python-argon2-cffi, python-canopen, python-cbor2,
-	python-filelock, python-flatbuffers, python-greenlet,
-	python-modbus-tk, python-pyalsa, python-pysftp, python-regex,
-	python-snappy, rtty, tinyproxy, udev-gentoo-scripts, unbound,
-	vuejs, wlroots.
-
-	New defconfigs: freescale_imx6ullevk, freescale_imx8qmmek,
-	nanopi_neo4, nanopi_r1, nitrogen8mm, nitrogen8mn, olpc_xo1,
-	olpc_xo175, roc_rk3399_pc, stm32mp157a_dk1, zynq_qmtech
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#10386: Add an option to put all compiled executables that
-		show up on target/ in staging/ as well
-	#11866: iniramfs file system fails to boot using  Grub on EFI x86_64
-	#12666: Doesn't pick up a custom bash profile
-	#12696: Uboot 2020.01 Problem loading Linux kernel  on Nano PI NEO
-	#12701: [patch] wpa_supplicant must depend on  openssl
-	#12711: host-localedef 2.30-20 fails to compile on  fedora 32 (gcc 10.0.1)
-	#12716: bio.h not found
-	#12726: systemctl preset-all failed for	 ctrl-alt-del.target
-	#12731: rtl8188eu not buildung for banana pi M1	 (glib, systemd, 4.18.12)
-	#12746: "sysdig" package description points to
-		http://sysdig.org, which bounces to malware site
-	#12751: OpenJdk package installation issues on	target
-	#12796: Update OpenSSL to Version 1.1.1g to patch  CVE-2020-1967
-	#12811: bootstrap stuck and no login prompt
-
-2020.02.3, released June 3rd, 2020
-
-	Important / security related fixes.
-
-	Fix various build issues of host packages on hosts using GCC
-	10.
-
-	Updated/fixed packages: arm-trusted-firmware, audit, bind,
-	binutils, bison, clamav, crda, dovecot, dtc, efl, elf2flt,
-	erlang, fakeroot, ffmpeg, fmc, fmlib, freerdp, gcc, git,
-	glib-networking, gnupg, leveldb, libexif, libssh2,
-	libusb-compat, linux-headers, lrzip, ltrace, mariadb, mesa3d,
-	mp4v2, openldap, openocd, perl, php, prosody,
-	python-pycryptodomex, python-pyqt5, qemu, rpi-firmware, rustc,
-	speexdsp, sysrepo, systemd, tremor, vboot-utils, wireshark,
-	xen
-
-	Removed packages: python-pycrypto
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12361: Init system (systemd) kills login on Raspberry Pi Zero
-	#12656: bison fails to relocate with relocate-sdk.sh
-	#12671: leveldb won't detect that snappy is present (static..
-	#12691: host-rust build fails
-	#12831: RPI-firmware package: DTB-overlay dependency
-
-2020.02.2, released May 12th, 2020
-
-	Important / security related fixes.
-
-	Musl: Disallow on PPC64 cores without AltiVec support
-	(E.G. e5500).
-
-	fs/cpio: Correctly handle booting with 'console='
-
-	release: Ensure temporary .br2-external.* files are not
-	included in the release tarball
-
-	Defconfigs: Fix various mistyped config options, or config
-	options where the dependencies were no longer met.
-
-	Updated/fixed packages: apache, azure-iot-sdk-c, binutils,
-	boinc, c-ares, cvs, docker-cli, docker-containerd,
-	docker-engine, domoticz, e2fsprogs, efl, evtest, exim, ffmpeg,
-	freerdp, gcc, gflags, glibc, gnuconfig, haproxy, imx-gpu-2d,
-	irrlicht, jpeg kodi-pvr-vuplus, libarchive, libcoap,
-	libfpm-extra, libglib2, libhtp, libid3tag, libinput, libmad,
-	libopenssl, libsepol, libssh, libv4l, libvncserver, libwpe,
-	localedef, mariadb, matchbox, mbedtls, mc, mesa3d-headers,
-	meson, midori, msgpack, netsnmp, nginx, ogre, openjdk,
-	openldap, openvpn, p7zip, paho-mqtt-c, php, polkit, python,
-	python-attrs, python-crossbar, python-dpkt, python-flask,
-	python-future, python-iptables, python-jedi, python-markdown2,
-	python3, qemu, qpdf, qt5, samba4, squashfs, squid, strongswan,
-	suricata, tzdata, util-linux, vlc, wget, webkitgtk,
-	wireguard-linux-compat, wireshark, wpebackend-fdo, wpewebkit,
-	zic
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11866: initramfs file system fails to boot using Grub on EFI x86_64
-	#12271: python-iptables runtime dependencies
-	#12726: systemctl preset-all failed for ctrl-alt-del.target
-	#12751: OpenJdk package installation issues on target
-	#12796: Update OpenSSL to Version 1.1.1g to patch CVE-2020-1967
-	#12811: bootstrap stuck and no login prompt
-	#12841: util-linux/sfdisk 2.35.1 fails on sector-size header
-
 2020.02.1, released April 10th, 2020
 
 	Important / security related fixes.
@@ -426,81 +189,6 @@
 	#12536: Linux-Headers extracting failure
 	#12546: Ninja 1.10 build Error
 
-2019.11.3, released April 10th, 2020
-
-	Important / security related fixes.
-
-	core: Fix compatibility with make 4.3+. Also fixup /lib
-	references in libtool .la files, similar to how it is done for
-	/usr/*.
-
-	toolchain: Fix kernel headers validation check for external
-	toolchains.
-
-	fs/initramfs: fix show-info so it also shows the usual
-	rootfs-related variables.
-
-	Updated/fixed packages: barebox-aux, bluez5_utils, busybox,
-	civetweb, cog, collectd, ffmpeg, gcc, gnutls, gssdp, gvfs, haproxy,
-	hiredis, hostapd, kmscube, libical, libopenssl, libsndfile,
-	linux-tools, llvm, monit, ntp, php, pure-ftpd, radvd, redis,
-	samba4, screen, sysdig, syslinux, syslog-ng, tor, uacme,
-	util-linux, vala, vlc, wpa_supplicant, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12746: "sysdig" package description points to http://sysdig.org, ..
-
-2019.11.2, released March 16th, 2020
-
-	Important / security related fixes.
-
-	Core: Ensure package-file-lists data is correct after
-	incremental builds as well.
-
-	Fix a race condition related to creating the output/staging
-	symlink on systems with coreutils < 8.27.
-
-	Toolchain: ARC tools bumped to arc-2019.09.
-
-	Br2-external: Fix patch handling when external linux-extension
-	packages are used. Fix compatibility with make 4.3+
-
-	Util-linux: Ensure that hwclock is built without GPLv3
-	code. Notice that builds with hwclock has contained
-	GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+)
-
-	Updated/fixed packages: armadillo, at, bcm2835, binutils,
-	blktrace, bluez-alsa, bootstrap, brltty, busybox, cairo,
-	clamav, cog, cups, czmq, dnsmasq, docker-containerd, dovecot,
-	dovecot-pigeonhole, e2fsprogs, elf2flt, eudev, exim, exiv2,
-	fbgrab, gettext-tiny, glibc, go, grep, gst1-validate, guile,
-	imagemagick, jhead, jpeg-turbo, kvm-unit-tests, lapack,
-	libarchive, libcgroup, libdrm, libevent, libexif, libftdi1,
-	libgdiplus, libjpeg, libsigrok, libsndfile, libssh2,
-	libsvgtiny, libvncserver, libvorbis, libxml2, libxslt, linknx,
-	lxc, lz4, mariadb, mbedtls, meson, mongoose, mosquitto, musl,
-	ncurses, nodejs, ntfs-3g, ogre, opencv3, openjdk, openjpeg,
-	openrc, openswan, openvmtools, optee-test, patch, php, piglet,
-	postgresql, pppd, proftpd, pure-ftpd, python-django,
-	python-pyqt5, python-setuptools-scm-git-archive, python3,
-	qemu, qt5base, qt5tools, qt5virtualkeyboard, qt5webengine,
-	qwt, rdesktop, ruby, runc, samba4, shellinabox,
-	skeleton-init-openrc, smartmontools, spdlog, sqlcipher, squid,
-	suricata, swig, swupdate, sysklogd, taglib, thrift,
-	ti-cgt-pru, uclibc, util-linux, vorbis-tools, webkitgtk,
-	wireshark, wpebackend-fdo, wpewebkit, xen,
-	xserver_xorg-server, zeromq, zsh, zziplib
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16
-	#12331: meson issue
-	#12456: qtvirtualkeyboard: No such file or directory
-	#12461: libglib2 build files with deep directory structure
-	#12481: minicom fails when output directory path contains "m4"
-	#12606: fbgrab location has changed
-
 2019.11.1, released January 12th, 2020
 
 	Important / security related fixes.
@@ -1198,66 +886,6 @@
 	#11761: Building custom kernel 5.1-rc3 or later breaks on objtool
 	#11816: Only selected coreutils binaries are installed
 
-2019.02.11, released April 9th, 2020
-
-	Important / security related fixes.
-
-	core: Fix compatibility with make 4.3+. Also fixup /lib
-	references in libtool .la files, similar to how it is done for
-	/usr/*.
-
-	toolchain: Fix kernel headers validation check for external
-	toolchains.
-
-	Updated/fixed packages: barebox-aux, bluez5_utils, busybox,
-	civetweb, collectd, ffmpeg, gcc, gnutls, gvfs, haproxy,
-	hiredis, kmscube, libical, libopenssl, libsndfile,
-	linux-tools, ntp, php, pure-ftpd, screen, sysdig, tor,
-	util-linux, vala, vlc, xserver_xorg-server
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#12746: "sysdig" package description points to http://sysdig.org, ..
-
-2019.02.10, released March 16th, 2020
-
-	Important / security related fixes.
-
-	Core: Ensure package-file-lists data is correct after
-	incremental builds as well.
-
-	Fix a race condition related to creating the output/staging
-	symlink on systems with coreutils < 8.27.
-
-	Br2-external: Fix compatibility with make 4.3+
-
-	Util-linux: Ensure that hwclock is built without GPLv3
-	code. Notice that builds with hwclock has contained
-	GPLv3-licensed code since util-linux 2.30 (Buildroot 2017.08+)
-
-	Updated/fixed packages: armadillo, at, binutils, blktrace,
-	bootstrap, busybox, cairo, cups, czmq, dnsmasq,
-	docker-containerd, dovecot, dovecot-pigeonhole, e2fsprogs,
-	eudev, exim, exiv2, fbgrab, grep, gst1-validate, guile,
-	imagemagick, jhead, kvm-unit-tests, lapack, libcgroup,
-	libftdi1, libjpeg, libsigrok, libsndfile, libssh2, libsvgtiny,
-	libvncserver, libvorbis, libxml2, libxslt, linux, lz4,
-	mariadb, mbedtls, meson, mfgtools, mongoose, ncurses, ntfs-3g,
-	opencv3, openjpeg, openswan, openvmtools, patch, php,
-	postgresql, pppd, proftpd, pure-ftpd, python-django,
-	python-pyqt5, python3, qemu, qt5base, qt5webengine, qwt,
-	rdesktop, ruby, runc, samba4, shellinabox, smartmontools,
-	sqlcipher, squid, swupdate, sysklogd, taglib, thrift,
-	ti-cgt-pru, uboot, util-linux, vorbis-tools, webkitgtk,
-	wireshark, xen, xserver_xorg-server, zeromq, zsh
-
-	Issues resolved (http://bugs.uclibc.org):
-
-	#11996: opencv3 SIGILL on Cortex-A5 with VFPv4-D16
-	#12331: meson issue
-	#12461: libglib2 build files with deep directory structure
-	#12606: fbgrab location has changed
-
 2019.02.9, released January 12th, 2020
 
 	Important / security related fixes.

Config.in.legacy

@@ -144,103 +144,6 @@ endif
 
 ###############################################################################
 
-comment "Legacy options removed in 2020.08"
-
-config BR2_PACKAGE_KODI_PERIPHERAL_STEAMCONTROLLER
-	bool "kodi-peripheral-steamcontroller package was removed"
-	select BR2_LEGACY
-	help
-	  This package is broken.
-
-comment "Legacy options removed in 2020.05"
-
-config BR2_PACKAGE_WIRINGPI
-	bool "wiringpi package removed"
-	select BR2_LEGACY
-	help
-	  The author of wiringpi has deprecated the package, and
-	  completely removed the git tree that was serving the
-	  sources, with this message:
-	  Please look for alternatives for wiringPi
-
-config BR2_PACKAGE_PYTHON_PYCRYPTO
-	bool "python-pycrypto package removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed, use python-pycryptodomex
-	  instead.
-
-config BR2_PACKAGE_MTDEV2TUIO
-	bool "mtdev2tuio package removed"
-	select BR2_LEGACY
-	help
-	  The mtdev2tuio package was removed as it breaks the builds
-	  every now and then and is not maintained upstream.
-
-config BR2_PACKAGE_EZXML
-	bool "ezxml package removed"
-	select BR2_LEGACY
-	help
-	  The ezXML package was removed as it is affected by several
-	  CVEs and is not maintained anymore (no release since 2006).
-
-config BR2_PACKAGE_COLLECTD_LVM
-	bool "lvm support in collectd was removed"
-	select BR2_LEGACY
-	help
-	  collectd removed LVM plugin, liblvm2app has been deprecated
-
-config BR2_PACKAGE_PYTHON_PYASN
-	bool "duplicate python-pyasn1 package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_PYASN1
-	help
-	  This package was a duplicate of python-pyasn1.
-
-config BR2_PACKAGE_PYTHON_PYASN_MODULES
-	bool "duplicate python-pyasn1-modules package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_PYASN1_MODULES
-	help
-	  This package was a duplicate of python-pyasn1-modules.
-
-config BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174
-	bool "duplicate QCA6174 firmware symbol removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174
-	help
-	  This config symbol duplicates existing symbol for QCA6174
-	  firmware.
-
-config BR2_PACKAGE_QT5CANVAS3D
-	bool "qt5canvas3d was removed"
-	select BR2_LEGACY
-	help
-	  This Qt5 module was removed by the upstream Qt project since
-	  Qt 5.13, so the corresponding Buildroot package was removed
-	  as well.
-
-config BR2_PACKAGE_KODI_LIBTHEORA
-	bool "libtheora support in Kodi was removed"
-	select BR2_LEGACY
-	help
-	  Kodi does not need libtheora
-
-config BR2_PACKAGE_CEGUI06
-	bool "BR2_PACKAGE_CEGUI06 was renamed"
-	select BR2_PACKAGE_CEGUI
-	select BR2_LEGACY
-	help
-	  The BR2_PACKAGE_CEGUI06 config symbol was renamed to
-	  BR2_PACKAGE_CEGUI.
-
-config BR2_GCC_VERSION_5_X
-	bool "gcc 5.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 5.x has been removed. The current
-	  default version (8.x or later) has been selected instead.
-
 comment "Legacy options removed in 2020.02"
 
 config BR2_PACKAGE_JAMVM
@@ -849,6 +752,12 @@ config BR2_PACKAGE_PYTHON_PYQT
 	  The python-pyqt package was removed. Consider python-pyqt5
 	  instead.
 
+config BR2_PACKAGE_GNURADIO_QTGUI
+	bool "gnuradio gr-qtgui option removed"
+	select BR2_LEGACY
+	help
+	  The gr-qtgui option was removed.
+
 config BR2_PACKAGE_LUACRYPTO
 	bool "luacrypto package removed"
 	select BR2_LEGACY

DEVELOPERS

@@ -31,14 +31,12 @@ F:	package/audit/
 F:	package/busybox/
 F:	package/checkpolicy/
 F:	package/cppdb/
-F:	package/gobject-introspection/
 F:	package/gstreamer1/gstreamer1/
 F:	package/gstreamer1/gstreamer1-mm/
 F:	package/gstreamer1/gst1-plugins-bad/
 F:	package/gstreamer1/gst1-plugins-base/
 F:	package/gstreamer1/gst1-plugins-good/
 F:	package/gstreamer1/gst1-plugins-ugly/
-F:	package/gstreamer1/gst1-python/
 F:	package/gstreamer1/gst1-vaapi/
 F:	package/imx-usb-loader/
 F:	package/janus-gateway/
@@ -48,16 +46,13 @@ F:	package/libressl/
 F:	package/libselinux/
 F:	package/libsemanage/
 F:	package/libsepol/
-F:	package/libtextstyle/
 F:	package/libwebsockets/
 F:	package/mender-grubenv/
 F:	package/nginx-naxsi/
 F:	package/openjdk/
 F:	package/openjdk-bin/
 F:	package/php/
-F:	package/pkcs11-helper/
 F:	package/policycoreutils/
-F:	package/prelink-cross/
 F:	package/polkit/
 F:	package/python3/
 F:	package/python-aioredis/
@@ -68,7 +63,6 @@ F:	package/python-daphne/
 F:	package/python-django-enumfields/
 F:	package/python-flask-sqlalchemy/
 F:	package/python-gitdb2/
-F:	package/python-gobject/
 F:	package/python-lockfile/
 F:	package/python-mutagen/
 F:	package/python-nested-dict/
@@ -87,7 +81,6 @@ F:	package/setools/
 F:	package/sngrep/
 F:	package/spidermonkey/
 F:	package/systemd/
-F:	support/testing/tests/package/test_gst1_python.py
 F:	support/testing/tests/package/test_python_gobject.py
 
 N:	Adam Heinrich <adam@adamh.cz>
@@ -96,12 +89,10 @@ F:	package/jack1/
 N:	Adrian Perez de Castro <aperez@igalia.com>
 F:	package/brotli/
 F:	package/bubblewrap/
-F:	package/cage/
 F:	package/cog/
 F:	package/libepoxy/
 F:	package/libwpe/
 F:	package/webkitgtk/
-F:	package/wlroots/
 F:	package/woff2/
 F:	package/wpebackend-fdo/
 F:	package/wpewebkit/
@@ -138,9 +129,6 @@ F:	package/minimodem/
 N:	Alexander Lukichev <alexander.lukichev@gmail.com>
 F:	package/openpgm/
 
-N:	Alexander Mukhin <alexander.i.mukhin@gmail.com>
-F:	package/tinyproxy/
-
 N:	Alexander Sverdlin <alexander.sverdlin@gmail.com>
 F:	package/mini-snmpd/
 
@@ -197,11 +185,9 @@ N:	Andrey Yurovsky <yurovsky@gmail.com>
 F:	package/rauc/
 
 N:	Angelo Compagnucci <angelo.compagnucci@gmail.com>
-F:	package/apparmor/
 F:	package/corkscrew/
 F:	package/fail2ban/
 F:	package/i2c-tools/
-F:	package/libapparmor/
 F:	package/mender/
 F:	package/mender-artifact/
 F:	package/mono/
@@ -264,7 +250,6 @@ F:	configs/raspberrypi4_64_defconfig
 
 N:	Asaf Kahlon <asafka7@gmail.com>
 F:	package/collectd/
-F:	package/libfuse3/
 F:	package/libuv/
 F:	package/python*
 F:	package/snmpclitools/
@@ -286,12 +271,7 @@ F:	package/luasec/
 F:	package/lua-ev/
 F:	package/orbit/
 
-N:	Attila Wagner <attila.wagner@onyxinsight.com>
-F:	package/python-canopen/
-
 N:	Bartosz Bilas <b.bilas@grinn-global.com>
-F:	board/stmicroelectronics/stm32mp157a-dk1/
-F:	configs/stm32mp157a_dk1_defconfig
 F:	package/python-esptool/
 F:	package/python-pyaes/
 F:	package/qt5/qt5scxml/
@@ -406,7 +386,6 @@ F:	package/libsndfile/
 F:	package/libsoil/
 F:	package/libsoundtouch/
 F:	package/libsquish/
-F:	package/libudfread/
 F:	package/liburiparser/
 F:	package/libva/
 F:	package/libva-intel-driver/
@@ -481,12 +460,14 @@ F:	package/x264/
 F:	package/x265/
 F:	package/ytree/
 F:	package/znc/
-F:	support/testing/tests/package/test_perl_html_parser.py
 
 N:	Biagio Montaruli <biagio.hkr@gmail.com>
 F:	board/acmesystems/
 F:	configs/acmesystems_*
 
+N:	Bimal Jacob <bimal.jacob@rockwellcollins.com>
+F:	package/nginx-upload/
+
 N:	Bogdan Radulescu <bogdan@nimblex.net>
 F:	package/iftop/
 F:	package/ncdu/
@@ -501,6 +482,33 @@ N:	Carlo Caione <carlo.caione@gmail.com>
 F:	package/jailhouse/
 F:	package/sunxi-boards/
 
+N:	Carlos Santos <unixmania@gmail.com>
+F:	package/busybox/
+F:	package/cups/
+F:	package/cups-filters/
+F:	package/gtest/
+F:	package/initscripts/
+F:	package/intel-microcode/
+F:	package/libpam-radius-auth/
+F:	package/libpam-tacplus/
+F:	package/liburiparser/
+F:	package/modem-manager/
+F:	package/pamtester/
+F:	package/pcm-tools/
+F:	package/perl-file-util/
+F:	package/skeleton-custom/
+F:	package/skeleton-init-common/
+F:	package/skeleton-init-none/
+F:	package/skeleton-init-systemd/
+F:	package/skeleton-init-sysv/
+F:	package/skeleton/
+F:	package/sysvinit/
+F:	package/util-linux/
+F:	package/tpm2-abrmd/
+F:	package/tpm2-tools/
+F:	package/tpm2-totp/
+F:	package/tpm2-tss/
+
 N:	Carsten Schoenert <c.schoenert@gmail.com>
 F:	package/dvbsnoop/
 F:	package/libdvbsi/
@@ -658,6 +666,9 @@ F:	package/openldap/
 N:	David du Colombier <0intro@gmail.com>
 F:	package/x264/
 
+N:	David Graziano <david.graziano@rockwellcollins.com>
+F:	package/libcsv/
+
 N:	David Lechner <david@lechnology.com>
 F:	board/lego/ev3/
 F:	configs/lego_ev3_defconfig
@@ -665,9 +676,7 @@ F:	linux/linux-ext-ev3dev-linux-drivers.mk
 F:	package/brickd/
 F:	package/ev3dev-linux-drivers/
 
-N:	Davide Viti <zinosat@gmail.com>
-F:	board/friendlyarm/nanopi-r1/
-F:	configs/nanopi_r1_defconfig
+N:	Davide Viti <zinosat@tiscali.it>
 F:	package/flann/
 F:	package/python-paho-mqtt/
 F:	package/qhull/
@@ -814,9 +823,6 @@ F:	package/libmaxminddb/
 F:	package/openzwave/
 
 N:	Fabrice Fontaine <fontaine.fabrice@gmail.com>
-F:	package/bearssl/
-F:	package/belle-sip/
-F:	package/belr/
 F:	package/boinc/
 F:	package/cairo/
 F:	package/duktape/
@@ -889,10 +895,6 @@ F:	package/tinydtls/
 F:	package/tinymembench/
 F:	package/whois/
 
-N:	Fabrice Goucem <fabrice.goucem@oss.nxp.com>
-F:	board/freescale/imx6ullevk/
-F:	configs/freescale_imx6ullevk_defconfig
-
 N:	Falco Hyfing <hyfinglists@gmail.com>
 F:	package/python-pymodbus/
 
@@ -967,9 +969,6 @@ F:	package/qt5/qt5webengine/
 F:	package/qt5/qt5webkit/
 F:	package/qt5/qt5webkit-examples/
 
-N:	Gao Xiang <hsiangkao@aol.com>
-F:	package/erofs-utils/
-
 N:	Gary Bisson <bisson.gary@gmail.com>
 F:	board/boundarydevices/
 F:	configs/nitrogen*
@@ -1052,7 +1051,6 @@ F:	package/sdl2/
 N:	Guillaume William Brs <guillaume.bressaix@gmail.com>
 F:	package/liquid-dsp/
 F:	package/pixiewps/
-F:	package/python-pybind/
 F:	package/reaver/
 
 N:	Guo Ren <ren_guo@c-sky.com>
@@ -1071,7 +1069,6 @@ F:	package/gnuradio/
 F:	package/gqrx/
 F:	package/gr-osmosdr/
 F:	package/libusbgx/
-F:	package/matio/
 F:	package/python-cheetah/
 F:	package/python-markdown/
 F:	package/python-remi/
@@ -1145,8 +1142,6 @@ F:	configs/pine64_defconfig
 F:	configs/pine64_sopine_defconfig
 
 N:	James Hilliard <james.hilliard1@gmail.com>
-F:	package/apcupsd/
-F:	package/exfatprogs/
 F:	package/gensio/
 F:	package/lua-std-debug/
 F:	package/lua-std-normalize/
@@ -1168,20 +1163,15 @@ F:	package/python-aiojobs/
 F:	package/python-aiorwlock/
 F:	package/python-aiosignal/
 F:	package/python-aiozipkin/
-F:	package/python-argon2-cffi/
 F:	package/python-async-lru/
 F:	package/python-async-timeout/
 F:	package/python-brotli/
-F:	package/python-cbor2/
 F:	package/python-cchardet/
-F:	package/python-flatbuffers/
 F:	package/python-frozenlist/
-F:	package/python-greenlet/
 F:	package/python-janus/
 F:	package/python-logstash/
 F:	package/python-multidict/
 F:	package/python-pycares/
-F:	package/python-snappy/
 F:	package/python-sockjs/
 F:	package/python-terminaltables/
 F:	package/python-yarl/
@@ -1219,15 +1209,15 @@ F:	package/python-pexpect/
 F:	package/python-ptyprocess/
 F:	package/zynq-boot-bin/
 
+N:	Jared Bents <jared.bents@rockwellcollins.com>
+F:	package/davici/
+
 N:	Jarkko Sakkinen <jarkko.sakkinen@intel.com>
 F:	package/quota/
 
 N:	Jason Pruitt <jrspruitt@gmail.com>
 F:	package/librtlsdr/
 
-N:	Jean Burgat <jeanburgat33@gmail.com>
-F:	package/openfpgaloader/
-
 N:	Jens Kleintje <scooby22@web.de>
 F:	package/gcnano-binaries/
 
@@ -1254,11 +1244,6 @@ F:	package/wmctrl/
 F:	package/x11r7/xdriver_xf86-video-imx/
 F:	package/x11r7/xdriver_xf86-video-imx-viv/
 
-N:	Jianhui Zhao <zhaojh329@gmail.com>
-F:	package/libuhttpd/
-F:	package/libuwsc/
-F:	package/rtty/
-
 N:	Joao Pinto <jpinto@synopsys.com>
 F:	board/synopsys/vdk/
 F:	configs/snps_aarch64_vdk_defconfig
@@ -1305,7 +1290,6 @@ F:	package/erlang-p1-yaml/
 F:	package/erlang-p1-yconf/
 F:	package/erlang-p1-zlib/
 F:	package/nginx-dav-ext/
-F:	package/vuejs/
 
 N:	John Stile <johns@msli.com>
 F:	package/dhcpcd/
@@ -1356,7 +1340,6 @@ N:	Joseph Kogut <joseph.kogut@gmail.com>
 F:	package/at-spi2-atk/
 F:	package/at-spi2-core/
 F:	package/clang/
-F:	package/earlyoom/
 F:	package/gconf/
 F:	package/libnss/
 F:	package/lld/
@@ -1406,17 +1389,14 @@ F:	configs/ts7680_defconfig
 F:	package/paho-mqtt-c
 
 N:	Julien Olivain <juju@cotds.org>
-F:	board/qmtech/zynq/
 F:	board/technexion/imx8mmpico/
 F:	board/technexion/imx8mpico/
 F:	configs/imx8mmpico_defconfig
 F:	configs/imx8mpico_defconfig
-F:	configs/zynq_qmtech_defconfig
 F:	package/fluid-soundfont/
 F:	package/fluidsynth/
 F:	package/glslsandbox-player/
 F:	package/ptm2human/
-F:	package/python-pyalsa/
 
 N:	Julien Viard de Galbert <julien@vdg.name>
 F:	package/dieharder/
@@ -1517,11 +1497,6 @@ F:	support/legal-info/
 N:	Lucas De Marchi <lucas.de.marchi@gmail.com>
 F:	package/fswebcam/
 
-N:	Lubomir Rintel <lkundrak@v3.sk>
-F:	board/olpc/
-F:	configs/olpc_xo1_defconfig
-F:	configs/olpc_xo175_defconfig
-
 N:	Ludovic Desroches <ludovic.desroches@microchip.com>
 F:	board/atmel/
 F:	configs/at91*
@@ -1533,11 +1508,6 @@ F:	package/python-simplejson/
 F:	package/python-versiontools/
 F:	package/wilc1000-firmware/
 
-N:	Maeva Manuel <maeva.manuel@oss.nxp.com>
-F:	board/freescale/imx8qmmek/
-F:	configs/freescale_imx8qmmek_defconfig
-F:	package/freescale-imx/imx-seco/
-
 N:	Mahyar Koshkouei <mahyar.koshkouei@gmail.com>
 F:	package/ffmpeg/
 F:	package/mpv/
@@ -1566,10 +1536,8 @@ F:	package/lua-flu/
 F:	package/lua-stdlib/
 F:	package/luaossl/
 F:	package/murata-cyw-fw/
-F:	package/netdata/
 F:	package/rs485conf/
 F:	package/turbolua/
-F:	support/testing/tests/package/test_netdata.py
 
 N:	Marcus Folkesson <marcus.folkesson@gmail.com>
 F:	package/libostree/
@@ -1581,8 +1549,6 @@ F:	utils/config
 F:	utils/diffconfig
 
 N:	Marek Belisko <marek.belisko@open-nandra.com>
-F:	board/friendlyarm/nanopi-neo4/
-F:	configs/nanopi_neo4_defconfig
 F:	package/libatasmart/
 F:	package/polkit/
 F:	package/sg3_utils/
@@ -1650,7 +1616,6 @@ F:	package/cgroupfs-mount/
 F:	package/crda/
 F:	package/cunit/
 F:	package/dacapo/
-F:	package/davici/
 F:	package/dnsmasq/
 F:	package/dosfstools/
 F:	package/eigen/
@@ -1700,7 +1665,6 @@ F:	package/protobuf-c/
 F:	package/protobuf/
 F:	package/python-bunch/
 F:	package/python-colorama/
-F:	package/python-filelock/
 F:	package/python-flask-cors/
 F:	package/python-iptables/
 F:	package/python-ipy/
@@ -1708,7 +1672,6 @@ F:	package/python-posix-ipc/
 F:	package/python-pycairo/
 F:	package/python-pypcap/
 F:	package/python-pyrex/
-F:	package/python-pysftp/
 F:	package/python-tinyrpc/
 F:	package/python-txdbus/
 F:	package/raptor/
@@ -1740,6 +1703,7 @@ F:	package/python-crossbar/
 F:	package/python-lmdb/
 F:	package/python-mistune/
 F:	package/python-netaddr/
+F:	package/python-pyasn-modules/
 F:	package/python-pygments/
 F:	package/python-pynacl/
 F:	package/python-pytrie/
@@ -1834,9 +1798,6 @@ F:	package/libfribidi/
 N:	Min Xu <xuminready@gmail.com>
 F:	package/shadowsocks-libev/
 
-N:	Mircea Gliga <gliga.mircea@gmail.com>
-F:	package/mbuffer/
-
 N:	Mirza Krak <mirza.krak@northern.tech>
 F:	package/mender/
 F:	package/mender-artifact/
@@ -1855,7 +1816,6 @@ F:	package/libgudev/
 N:	Naumann Andreas <ANaumann@ultratronik.de>
 F:	package/evemu/
 F:	package/libevdev/
-F:	package/pkg-qmake.mk
 
 N:	Nicola Di Lieto <nicola.dilieto@gmail.com>
 F:	package/uacme/
@@ -1919,6 +1879,9 @@ F:	package/openjpeg/
 N:	Olivier Singla <olivier.singla@gmail.com>
 F:	package/shellinabox/
 
+N:	Paresh Chaudhary <paresh.chaudhary@rockwellcollins.com>
+F:	package/checksec/
+
 N:	Parnell Springmeyer <parnell@digitalmentat.com>
 F:	package/scrypt/
 
@@ -2027,6 +1990,7 @@ F:	package/postgresql/
 F:	package/qt5/
 F:	package/quotatool/
 F:	package/racehound/
+F:	package/wiringpi/
 
 N:	Peter Thompson <peter.macleod.thompson@gmail.com>
 F:	package/sdl2_gfx/
@@ -2063,9 +2027,6 @@ F:	package/lttng-tools/
 F:	package/python-ipython/
 F:	package/liburcu/
 
-N:	Philippe Reynes <philippe.reynes@softathome.com>
-F:	package/ibm-sw-tpm2/
-
 N:	Pierre Crokaert <pct@crookies.net>
 F:	board/hardkernel/odroidxu4/
 F:	configs/odroidxu4_defconfig
@@ -2088,7 +2049,6 @@ F:	package/libxml2/
 F:	package/mongoose/
 F:	package/mxml/
 F:	package/numactl/
-F:	package/python-modbus-tk/
 F:	package/python-periphery/
 F:	package/raspi-gpio/
 F:	package/sbc/
@@ -2122,18 +2082,17 @@ F:	package/uhttpd/
 F:	package/ustream-ssl/
 
 N:	Refik Tuzakli <tuzakli.refik@gmail.com>
-F:	package/freescale-imx/
 F:	package/paho-mqtt-cpp/
 
-N:	Raphaël Mélotte <raphael.melotte@essensium.com>
-F:	package/jbig2dec/
-
 N:	Rémi Rérolle <remi.rerolle@gmail.com>
 F:	package/libfreeimage/
 
 N:	Renaud Aubin <root@renaud.io>
 F:	package/libhttpparser/
 
+N:	Rhys Williams <github@wilberforce.co.nz>
+F:	package/lirc-tools/
+
 N:	Ricardo Martincoski <ricardo.martincoski@datacom.com.br>
 F:	package/atop/
 F:	package/thermald/
@@ -2218,6 +2177,8 @@ F:	package/davfs2/
 N:	Ryan Barnett <ryan.barnett@rockwellcollins.com>
 F:	package/atftp/
 F:	package/miraclecast/
+F:	package/python-pyasn/
+F:	package/python-pycrypto/
 F:	package/python-pysnmp/
 F:	package/python-pysnmp-mibs/
 F:	package/python-tornado/
@@ -2286,7 +2247,8 @@ F:	configs/linksprite_pcduino_defconfig
 F:	configs/orangepi_one_defconfig
 F:	configs/orangepi_pc_plus_defconfig
 F:	configs/orangepi_zero_defconfig
-F:	configs/solidrun_macchiatobin_defconfig
+F:	configs/solidrun_macchiatobin_mainline_defconfig
+F:	configs/solidrun_macchiatobin_marvell_defconfig
 F:	package/armbian-firmware/
 F:	package/hostapd/
 F:	package/rtl8189fs/
@@ -2352,9 +2314,6 @@ F:	package/libvpx/
 F:	package/mesa3d-demos/
 F:	package/ti-gfx/
 
-N:	Stefan Ott <stefan@ott.net>
-F:	package/unbound/
-
 N:	Stefan Sørensen <stefan.sorensen@spectralink.com>
 F:	package/cracklib/
 F:	package/libpwquality/
@@ -2363,12 +2322,11 @@ F:	package/libscrypt/
 N:	Stephan Hoffmann <sho@relinux.de>
 F:	package/cache-calibrator/
 F:	package/gtest/
-F:	package/libhttpserver/
 F:	package/mtdev/
+F:	package/mtdev2tuio/
 
-N:	Stephane Viau <stephane.viau@oss.nxp.com>
-F:	board/freescale/imx8mnevk/
-F:	configs/freescale_imx8mnevk_defconfig
+N:	Stephan Hoffmann <stephan.hoffmann@ext.grandcentrix.net>
+F:	package/libhttpserver/
 
 N:	Steve Calfee <stevecalfee@gmail.com>
 F:	package/python-pymysql/
@@ -2391,11 +2349,6 @@ N:	Steven Noonan <steven@uplinklabs.net>
 F:	package/hwloc/
 F:	package/powertop/
 
-N:	Suniel Mahesh <sunil@amarulasolutions.com>
-F:	board/firefly/
-F:	configs/roc_pc_rk3399_defconfig
-F:	package/arm-gnu-a-toolchain/
-
 N:	Sven Haardiek <sven.haardiek@iotec-gmbh.de>
 F:	package/lcdproc/
 F:	package/python-influxdb/
@@ -2425,32 +2378,21 @@ F:	package/civetweb/
 N:	Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
 F:	docs/manual/
 F:	package/cereal/
-F:	package/chartjs/
 F:	package/libtelnet/
 F:	package/opkg-utils/
 F:	package/perl-convert-asn1/
 F:	package/perl-crypt-blowfish/
 F:	package/perl-crypt-cbc/
 F:	package/perl-crypt-openssl-aes/
-F:	package/perl-i18n/
-F:	package/perl-locale-maketext-lexicon/
-F:	package/perl-lwp-protocol-https/
 F:	package/perl-math-prime-util/
 F:	package/perl-mime-base64-urlsafe/
 F:	package/perl-mojolicious-plugin-authentication/
-F:	package/perl-mojolicious-plugin-authorization/
-F:	package/perl-mojolicious-plugin-cspheader/
-F:	package/perl-mojolicious-plugin-i18n/
-F:	package/perl-mojolicious-plugin-securityheader/
-F:	package/perl-mozilla-ca/
 F:	package/perl-net-snmp/
 F:	package/perl-net-ssh2/
 F:	package/perl-net-telnet/
-F:	package/perl-path-class/
 F:	package/pigz/
 F:	package/xenomai/
 F:	support/scripts/size-stats
-F:	support/testing/tests/package/test_perl_lwp_protocol_https.py
 F:	utils/size-stats-compare
 F:	toolchain/
 
@@ -2514,7 +2456,6 @@ F:	package/scons/
 F:	package/squashfs/
 F:	package/wayland/
 F:	package/weston/
-F:	support/testing/tests/boot/test_syslinux.py
 F:	toolchain/
 
 N:	Timo Ketola <timo.ketola@exertus.fi>
@@ -2527,7 +2468,6 @@ F:	package/python-avro/
 F:	package/redis/
 F:	package/waf/
 F:	support/testing/tests/package/test_crudini.py
-F:	support/testing/tests/package/test_redis.py
 
 N:	Trent Piepho <tpiepho@impinj.com>
 F:	package/libp11/
@@ -2602,15 +2542,12 @@ F:	package/python-pyusb/
 N:	Wojciech Niziński <niziak@spox.org>
 F:	package/fwup/
 
-N:	Yair Ben Avraham <yairba@protonmail.com>
-F:	package/gloox/
-
 N:	Yann E. MORIN <yann.morin.1998@free.fr>
 F:	board/friendlyarm/nanopi-neo/
 F:	configs/nanopi_neo_defconfig
 F:	fs/squashfs/
 F:	package/asterisk/
-F:	package/cegui/
+F:	package/cegui06/
 F:	package/dahdi-linux/
 F:	package/dahdi-tools/
 F:	package/dtc/
@@ -2621,7 +2558,6 @@ F:	package/keyutils/
 F:	package/libbsd/
 F:	package/libedit/
 F:	package/libgsm/
-F:	package/libiberty/
 F:	package/libinput/
 F:	package/libiscsi/
 F:	package/libpri/

Makefile

@@ -92,9 +92,9 @@ all:
 .PHONY: all
 
 # Set and export the version string
-export BR2_VERSION := 2020.08-git
+export BR2_VERSION := 2020.02.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1591045000
+BR2_VERSION_EPOCH = 1586551000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -747,11 +747,10 @@ target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
-		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake \
-		$(TARGET_DIR)/usr/doc
+		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
 	find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
-		\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
+		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
 endif
@@ -1190,7 +1189,7 @@ release: OUT = buildroot-$(BR2_VERSION)
 release:
 	git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
 	$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
-	$(MAKE) O=$(OUT) distclean
+	$(MAKE) O=$(OUT) clean
 	tar rf $(OUT).tar $(OUT)
 	gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
 	bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2

arch/Config.in.x86

@@ -1,8 +1,6 @@
 # i386/x86_64 cpu features
 config BR2_X86_CPU_HAS_MMX
 	bool
-config BR2_X86_CPU_HAS_3DNOW
-	bool
 config BR2_X86_CPU_HAS_SSE
 	bool
 config BR2_X86_CPU_HAS_SSE2
@@ -157,18 +155,15 @@ config BR2_x86_k6_2
 	bool "k6-2"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_athlon
 	bool "athlon"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_athlon_4
 	bool "athlon-4"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_opteron
 	bool "opteron"
 	select BR2_X86_CPU_HAS_MMX
@@ -214,7 +209,6 @@ config BR2_x86_c3
 	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_c32
 	bool "Via C3-2 (Nehemiah cores)"
 	depends on !BR2_x86_64

board/beelink/gs1/patches/arm-trusted-firmware/0001-plat-allwinner-common-use-r_wdog-instead-of-wdog.patch

@@ -0,0 +1,39 @@
+From 523ab5be1a84e9aa15fb62c3a15a6338b01d3961 Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
+Date: Tue, 9 Apr 2019 00:15:06 +0200
+Subject: [PATCH] plat: allwinner: common: use r_wdog instead of wdog
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Some Allwinner H6 has a broken watchdog that doesn't
+make the soc reboot.
+
+Use the R_WATCHDOG instead.
+
+Signed-off-by: Clément Péron <peron.clem@gmail.com>
+Change-Id: Ie95cc30a80ed517b60b30d6bc2e655a1b53f18ba
+---
+ plat/allwinner/common/sunxi_pm.c | 6 +++---
+ 1 file changed, 3 insertions(+), 3 deletions(-)
+
+diff --git a/plat/allwinner/common/sunxi_pm.c b/plat/allwinner/common/sunxi_pm.c
+index 1d2dc938..13e13532 100644
+--- a/plat/allwinner/common/sunxi_pm.c
++++ b/plat/allwinner/common/sunxi_pm.c
+@@ -20,9 +20,9 @@
+ #include <sunxi_mmap.h>
+ #include <sunxi_private.h>
+ 
+-#define SUNXI_WDOG0_CTRL_REG		(SUNXI_WDOG_BASE + 0x0010)
+-#define SUNXI_WDOG0_CFG_REG		(SUNXI_WDOG_BASE + 0x0014)
+-#define SUNXI_WDOG0_MODE_REG		(SUNXI_WDOG_BASE + 0x0018)
++#define SUNXI_WDOG0_CTRL_REG		(SUNXI_R_WDOG_BASE + 0x0010)
++#define SUNXI_WDOG0_CFG_REG		(SUNXI_R_WDOG_BASE + 0x0014)
++#define SUNXI_WDOG0_MODE_REG		(SUNXI_R_WDOG_BASE + 0x0018)
+ 
+ #define mpidr_is_valid(mpidr) ( \
+ 	MPIDR_AFFLVL3_VAL(mpidr) == 0 && \
+-- 
+2.20.1
+

board/beelink/gs1/patches/uboot/0001-arm-dts-sync-dts-for-Allwinner-H6.patch

@@ -0,0 +1,279 @@
+From 99cade8743158889b3e8db93c003b3318ebd4bda Mon Sep 17 00:00:00 2001
+From: =?UTF-8?q?Cl=C3=A9ment=20P=C3=A9ron?= <peron.clem@gmail.com>
+Date: Sun, 11 Aug 2019 22:38:57 +0200
+Subject: [PATCH] arm: dts: sync dts for Allwinner H6
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Sync Kernel DTS for Allwinner H6 boards.
+
+Drop /omit-if-no-ref/ keyword as it's not supported by U-boot.
+
+commit <d45331b00ddb> Linux 5.3-rc4
+
+Signed-off-by: Clément Péron <peron.clem@gmail.com>
+---
+ arch/arm/dts/sun50i-h6-beelink-gs1.dts | 76 ++++++++++++++++++++++++++
+ arch/arm/dts/sun50i-h6-pine-h64.dts    | 12 ++++
+ arch/arm/dts/sun50i-h6.dtsi            | 46 +++++++++++++++-
+ 3 files changed, 131 insertions(+), 3 deletions(-)
+
+diff --git a/arch/arm/dts/sun50i-h6-beelink-gs1.dts b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+index 54b0882bed..0dc33c90dd 100644
+--- a/arch/arm/dts/sun50i-h6-beelink-gs1.dts
++++ b/arch/arm/dts/sun50i-h6-beelink-gs1.dts
+@@ -14,6 +14,7 @@
+ 	compatible = "azw,beelink-gs1", "allwinner,sun50i-h6";
+ 
+ 	aliases {
++		ethernet0 = &emac;
+ 		serial0 = &uart0;
+ 	};
+ 
+@@ -21,6 +22,17 @@
+ 		stdout-path = "serial0:115200n8";
+ 	};
+ 
++	connector {
++		compatible = "hdmi-connector";
++		type = "a";
++
++		port {
++			hdmi_con_in: endpoint {
++				remote-endpoint = <&hdmi_out_con>;
++			};
++		};
++	};
++
+ 	leds {
+ 		compatible = "gpio-leds";
+ 
+@@ -41,6 +53,40 @@
+ 	};
+ };
+ 
++&de {
++	status = "okay";
++};
++
++&ehci0 {
++	status = "okay";
++};
++
++&emac {
++	pinctrl-names = "default";
++	pinctrl-0 = <&ext_rgmii_pins>;
++	phy-mode = "rgmii";
++	phy-handle = <&ext_rgmii_phy>;
++	phy-supply = <&reg_aldo2>;
++	status = "okay";
++};
++
++&hdmi {
++	status = "okay";
++};
++
++&hdmi_out {
++	hdmi_out_con: endpoint {
++		remote-endpoint = <&hdmi_con_in>;
++	};
++};
++
++&mdio {
++	ext_rgmii_phy: ethernet-phy@1 {
++		compatible = "ethernet-phy-ieee802.3-c22";
++		reg = <1>;
++	};
++};
++
+ &mmc0 {
+ 	vmmc-supply = <&reg_cldo1>;
+ 	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>;
+@@ -57,6 +103,15 @@
+ 	status = "okay";
+ };
+ 
++&ohci0 {
++	status = "okay";
++};
++
++&pio {
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_aldo1>;
++};
++
+ &r_i2c {
+ 	status = "okay";
+ 
+@@ -177,8 +232,29 @@
+ 	};
+ };
+ 
++&r_pio {
++	/*
++	 * PL0 and PL1 are used for PMIC I2C
++	 * don't enable the pl-supply else
++	 * it will fail at boot
++	 *
++	 * vcc-pl-supply = <&reg_aldo1>;
++	 */
++	vcc-pm-supply = <&reg_aldo1>;
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_ph_pins>;
+ 	status = "okay";
+ };
++
++&usb2otg {
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usb2phy {
++	usb0_vbus-supply = <&reg_vcc5v>;
++	status = "okay";
++};
+diff --git a/arch/arm/dts/sun50i-h6-pine-h64.dts b/arch/arm/dts/sun50i-h6-pine-h64.dts
+index 4802902e12..1898345183 100644
+--- a/arch/arm/dts/sun50i-h6-pine-h64.dts
++++ b/arch/arm/dts/sun50i-h6-pine-h64.dts
+@@ -127,6 +127,12 @@
+ 	status = "okay";
+ };
+ 
++&pio {
++	vcc-pc-supply = <&reg_bldo2>;
++	vcc-pd-supply = <&reg_cldo1>;
++	vcc-pg-supply = <&reg_aldo1>;
++};
++
+ &r_i2c {
+ 	status = "okay";
+ 
+@@ -243,10 +249,16 @@
+ 	pcf8563: rtc@51 {
+ 		compatible = "nxp,pcf8563";
+ 		reg = <0x51>;
++		interrupt-parent = <&r_intc>;
++		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
+ 		#clock-cells = <0>;
+ 	};
+ };
+ 
++&r_pio {
++	vcc-pm-supply = <&reg_aldo1>;
++};
++
+ &uart0 {
+ 	pinctrl-names = "default";
+ 	pinctrl-0 = <&uart0_ph_pins>;
+diff --git a/arch/arm/dts/sun50i-h6.dtsi b/arch/arm/dts/sun50i-h6.dtsi
+index e0dc4a05c1..a117f479ae 100644
+--- a/arch/arm/dts/sun50i-h6.dtsi
++++ b/arch/arm/dts/sun50i-h6.dtsi
+@@ -101,7 +101,7 @@
+ 		#size-cells = <1>;
+ 		ranges;
+ 
+-		display-engine@1000000 {
++		bus@1000000 {
+ 			compatible = "allwinner,sun50i-h6-de3",
+ 				     "allwinner,sun50i-a64-de2";
+ 			reg = <0x1000000 0x400000>;
+@@ -203,11 +203,32 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		dma: dma-controller@3002000 {
++			compatible = "allwinner,sun50i-h6-dma";
++			reg = <0x03002000 0x1000>;
++			interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
++			clocks = <&ccu CLK_BUS_DMA>, <&ccu CLK_MBUS_DMA>;
++			clock-names = "bus", "mbus";
++			dma-channels = <16>;
++			dma-requests = <46>;
++			resets = <&ccu RST_BUS_DMA>;
++			#dma-cells = <1>;
++		};
++
+ 		sid: sid@3006000 {
+ 			compatible = "allwinner,sun50i-h6-sid";
+ 			reg = <0x03006000 0x400>;
+ 		};
+ 
++		watchdog: watchdog@30090a0 {
++			compatible = "allwinner,sun50i-h6-wdt",
++				     "allwinner,sun6i-a31-wdt";
++			reg = <0x030090a0 0x20>;
++			interrupts = <GIC_SPI 50 IRQ_TYPE_LEVEL_HIGH>;
++			/* Broken on some H6 boards */
++			status = "disabled";
++		};
++
+ 		pio: pinctrl@300b000 {
+ 			compatible = "allwinner,sun50i-h6-pinctrl";
+ 			reg = <0x0300b000 0x400>;
+@@ -243,6 +264,18 @@
+ 				bias-pull-up;
+ 			};
+ 
++			/*
++			 * /omit-if-no-ref/ isn't supported by U-boot
++			 * keep this comment to avoid bad sync with Linux
++			 */
++			mmc1_pins: mmc1-pins {
++				pins = "PG0", "PG1", "PG2", "PG3",
++				       "PG4", "PG5";
++				function = "mmc1";
++				drive-strength = <30>;
++				bias-pull-up;
++			};
++
+ 			mmc2_pins: mmc2-pins {
+ 				pins = "PC1", "PC4", "PC5", "PC6",
+ 				       "PC7", "PC8", "PC9", "PC10",
+@@ -294,6 +327,8 @@
+ 			resets = <&ccu RST_BUS_MMC1>;
+ 			reset-names = "ahb";
+ 			interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
++			pinctrl-names = "default";
++			pinctrl-0 = <&mmc1_pins>;
+ 			status = "disabled";
+ 			#address-cells = <1>;
+ 			#size-cells = <0>;
+@@ -445,7 +480,6 @@
+ 			resets = <&ccu RST_BUS_OHCI3>,
+ 				 <&ccu RST_BUS_EHCI3>;
+ 			phys = <&usb2phy 3>;
+-			phy-names = "usb";
+ 			status = "disabled";
+ 		};
+ 
+@@ -457,7 +491,6 @@
+ 				 <&ccu CLK_USB_OHCI3>;
+ 			resets = <&ccu RST_BUS_OHCI3>;
+ 			phys = <&usb2phy 3>;
+-			phy-names = "usb";
+ 			status = "disabled";
+ 		};
+ 
+@@ -613,6 +646,13 @@
+ 			#reset-cells = <1>;
+ 		};
+ 
++		r_watchdog: watchdog@7020400 {
++			compatible = "allwinner,sun50i-h6-wdt",
++				     "allwinner,sun6i-a31-wdt";
++			reg = <0x07020400 0x20>;
++			interrupts = <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
++		};
++
+ 		r_intc: interrupt-controller@7021000 {
+ 			compatible = "allwinner,sun50i-h6-r-intc",
+ 				     "allwinner,sun6i-a31-r-intc";
+-- 
+2.20.1
+

board/boundarydevices/common/boot.cmd

@@ -9,9 +9,9 @@ if itest.s x51 == "x${imx_cpu}" ; then
 	a_base=0x90000000
 elif itest.s x53 == "x${imx_cpu}"; then
 	a_base=0x70000000
-elif itest.s x6SX == "x${imx_cpu}" || itest.s x6ULL == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
+elif itest.s x6SX == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
 	a_base=0x80000000
-elif itest.s x8MQ == "x${imx_cpu}" || itest.s x8MM == "x${imx_cpu}" || itest.s x8MMQ == "x${imx_cpu}" || itest.s x8MNano == "x${imx_cpu}"; then
+elif itest.s x8MQ == "x${imx_cpu}"; then
 	a_base=0x40000000
 	kernelimage=Image
 	bootcommand=booti
@@ -43,18 +43,10 @@ if itest.s "x" == "x${fdt_file}" ; then
 		fdt_file=imx6qp-${board}.dtb;
 	elif itest.s x6SX == "x${imx_cpu}" ; then
 		fdt_file=imx6sx-${board}${m4}.dtb;
-	elif itest.s x6ULL == "x${imx_cpu}" ; then
-		fdt_file=imx6ull-${board}.dtb;
 	elif itest.s x7D == "x${imx_cpu}" ; then
 		fdt_file=imx7d-${board}${m4}.dtb;
 	elif itest.s x8MQ == "x${imx_cpu}" ; then
 		fdt_file=imx8mq-${board}${m4}.dtb;
-	elif itest.s x8MM == "x${imx_cpu}" ; then
-		fdt_file=imx8mm-${board}${m4}.dtb;
-	elif itest.s x8MMQ == "x${imx_cpu}" ; then
-		fdt_file=imx8mm-${board}${m4}.dtb;
-	elif itest.s x8MNano == "x${imx_cpu}" ; then
-		fdt_file=imx8mn-${board}${m4}.dtb;
 	elif itest.s x51 == "x${imx_cpu}" ; then
 		fdt_file=imx51-${board}.dtb;
 	elif itest.s x53 == "x${imx_cpu}" ; then
@@ -71,6 +63,7 @@ fi
 if load ${devtype} ${devnum}:${distro_bootpart} ${a_script} uEnv.txt ; then
     env import -t ${a_script} ${filesize}
 fi
+
 setenv bootargs ${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc cpu=${imx_cpu} board=${board}
 
 if load ${devtype} ${devnum}:${distro_bootpart} ${a_fdt} ${prefix}${fdt_file} ; then
@@ -81,20 +74,21 @@ else
 	exit;
 fi
 
-fdt resize 4096
-if itest.s "x" != "x${cmd_board}" ; then
-	run cmd_board
-fi
+fdt resize
 if itest.s "x" != "x${cmd_custom}" ; then
 	run cmd_custom
 fi
 if itest.s "x" != "x${cmd_hdmi}" ; then
 	run cmd_hdmi
-	if itest.s x != x${allow_noncea} ; then
+	if itest.s x == x${allow_noncea} ; then
+		setenv bootargs ${bootargs} mxc_hdmi.only_cea=1;
+		echo "only CEA modes allowed on HDMI port";
+	else
 		setenv bootargs ${bootargs} mxc_hdmi.only_cea=0;
 		echo "non-CEA modes allowed on HDMI, audio may be affected";
 	fi
 fi
+
 if itest.s "x" != "x${cmd_lcd}" ; then
 	run cmd_lcd
 fi

board/boundarydevices/common/post-image.sh

@@ -1,5 +1,16 @@
 #!/bin/sh
 
-support/scripts/genimage.sh -c $(dirname $0)/genimage.cfg
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
 
 exit $?

board/boundarydevices/common/readme.txt

@@ -1,6 +1,6 @@
 Buildroot for Boundary Devices platforms:
 
-https://boundarydevices.com/nitrogen-sbcs-and-soms/
+https://boundarydevices.com/product-category/popular-sbc-and-som-modules/
 
 Here is the list of targeted platforms per defconfig:
 
@@ -19,19 +19,7 @@ Here is the list of targeted platforms per defconfig:
 - nitrogen7_defconfig
   - Nitrogen7
 
-- nitrogen8m_defconfig
-  - Nitrogen8M
-  - Nitrogen8M_SOM
-
-- nitrogen8mm_defconfig
-  - Nitrogen8MMini
-  - Nitrogen8MMini_SOM
-
-- nitrogen8mn_defconfig
-  - Nitrogen8MNano
-  - Nitrogen8MNano_SOM
-
-To install, simply copy the image to your storage (SD, eMMC, USB):
+To install, simply copy the image to a uSD card:
 
 $ sudo dd if=output/images/sdcard.img of=/dev/sdX
 

board/boundarydevices/common/upgrade.cmd

@@ -13,14 +13,11 @@ if itest.s x51 == "x${imx_cpu}"; then
 	a_base=0x92000000
 elif itest.s x53 == "x${imx_cpu}"; then
 	a_base=0x72000000
-elif itest.s x6SX == "x${imx_cpu}" || itest.s x6ULL == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
+elif itest.s x6SX == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
 	a_base=0x82000000
-elif itest.s x8MQ == "x${imx_cpu}" || itest.s x8MM == "x${imx_cpu}" || itest.s x8MMQ == "x${imx_cpu}"; then
+elif itest.s x8MQ == "x${imx_cpu}"; then
 	a_base=0x42000000
 	offset=0x8400
-elif itest.s x8MNano == "x${imx_cpu}"; then
-	a_base=0x42000000
-	offset=0x8000
 fi
 
 qspi_match=1
@@ -59,7 +56,6 @@ mmc dev ${env_dev} ${env_part}
 mmc read ${a_uImage2} ${cntoffset} ${cntfile}
 if cmp.b ${a_uImage1} ${a_uImage2} ${filesize} ; then
 	echo "------- U-Boot versions match" ;
-	echo "------- U-Boot upgrade NOT needed" ;
 	exit ;
 fi
 
@@ -138,7 +134,7 @@ fi
 if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
 	echo "------- U-Boot versions match" ;
 	if itest.s "${qspi_match}" == "1" ; then
-		echo "------- U-Boot upgrade NOT needed" ;
+		echo "------- upgrade not needed" ;
 		if itest.s "x" != "x${next}" ; then
 			if ${fs}load ${devtype} ${devnum}:${distro_bootpart} ${a_script} ${next} ; then
 				source ${a_script}
@@ -210,12 +206,6 @@ if itest.s "x" != "x${next}" ; then
 fi
 fi
 
-if itest.s "xno" == "x${reset}" ; then
-	while echo "---- U-Boot upgraded. Please reset the board" ; do
-		sleep 120
-	done
-fi
-echo "---- U-Boot upgraded. The board will now reset."
-sleep 1
-reset
+while echo "---- U-Boot upgraded. Please reset the board" ; do
+	sleep 120
 done

board/firefly/roc-rk3399-pc/extlinux.conf

@@ -1,4 +0,0 @@
-label RK3399RocPC linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-roc-pc.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait

board/firefly/roc-rk3399-pc/genimage.cfg

@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/firefly/roc-rk3399-pc/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf

board/firefly/roc-rk3399-pc/readme.txt

@@ -1,40 +0,0 @@
-Libre Computer Board ROC-RK3399-PC
-===================================
-
-Build:
-
-  $ make roc_pc_rk3399_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── rk3399-roc-pc.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html

board/freescale/common/imx/genimage.cfg.template

@@ -9,7 +9,6 @@
 
 image boot.vfat {
   vfat {
-    label = "boot"
     files = {
       %FILES%
     }

board/freescale/common/imx/genimage.cfg.template_imx8

@@ -9,12 +9,11 @@
 
 image boot.vfat {
   vfat {
-    label = "boot"
     files = {
       %FILES%
     }
   }
-  size = 64M
+  size = 32M
 }
 
 image sdcard.img {

board/freescale/common/imx/genimage.cfg.template_spl

@@ -9,7 +9,6 @@
 
 image boot.vfat {
   vfat {
-    label = "boot"
     files = {
       %FILES%
     }

board/freescale/common/imx/imx8-bootloader-prepare.sh

@@ -9,26 +9,19 @@ main ()
 	fi
 
 	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
 		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
 
 		${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
 		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its
 
 		${HOST_DIR}/bin/mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00960000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
-		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
-		rm -f ${BINARIES_DIR}/u-boot.its
-
-		${HOST_DIR}/bin/mkimage_imx8 -v v2 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x912000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	else
 		${HOST_DIR}/bin/mkimage_imx8 -commit > ${BINARIES_DIR}/mkimg.commit
 		cat ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/mkimg.commit > ${BINARIES_DIR}/u-boot-hash.bin

board/freescale/common/imx/post-image.sh

@@ -38,8 +38,6 @@ genimage_type()
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
-		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then

board/freescale/common/mxs/genimage.cfg.template

@@ -8,7 +8,6 @@
 
 image boot.vfat {
 	vfat {
-		label = "boot"
 		files = {
 			%FILES%
 		}

board/freescale/imx6sabre/patches/uboot/0002-imx-Create-distinct-pre-processed-mkimage-config-fil.patch

@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
++++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
++# mkimage source config file
++IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
++# How to create a cpp processed config file, they all use the same source
++%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
++u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
++u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
++SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
++targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+

board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch

@@ -1,4 +1,4 @@
-From e9b507b695331ef6fa941b471be0a7f284ec6980 Mon Sep 17 00:00:00 2001
+From 90ecc0ad14337898b75843efc6530fc4a34f7808 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@freescale.com>
 Date: Tue, 12 Aug 2014 10:17:31 +0200
 Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
@@ -14,24 +14,23 @@ This patch tells u-boot to tell the kernel to boot into /init (instead of
 buildroot system entirely through USB.
 
 Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
-Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
 ---
- include/configs/imx_env.h | 2 +-
+ include/configs/mx6sabre_common.h | 2 +-
  1 file changed, 1 insertion(+), 1 deletion(-)
 
-diff --git a/include/configs/imx_env.h b/include/configs/imx_env.h
-index 234af33e55..7e31d208dc 100644
---- a/include/configs/imx_env.h
-+++ b/include/configs/imx_env.h
-@@ -20,7 +20,7 @@
+diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
+index 93d4c4b..d2e7efd 100644
+--- a/include/configs/mx6sabre_common.h
++++ b/include/configs/mx6sabre_common.h
+@@ -52,7 +52,7 @@
  
- #define CONFIG_MFG_ENV_SETTINGS_DEFAULT \
- 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+ #define CONFIG_MFG_ENV_SETTINGS \
+ 	"mfgtool_args=setenv bootargs console=" CONSOLE_DEV ",115200 " \
 -		"rdinit=/linuxrc " \
 +		"rdinit=/init " \
- 		"clk_ignore_unused "\
- 		"\0" \
- 	"kboot="MFG_BOOT_CMD"\0"\
+ 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+ 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+ 		"g_mass_storage.iSerialNumber=\"\" "\
 -- 
-2.25.1
+2.1.4
 

board/freescale/imx6ullevk/readme.txt

@@ -1,61 +0,0 @@
-****************************
-Freescale i.MX6ULL EVK board
-****************************
-
-This file documents the Buildroot support for the Freescale i.MX6ULL EVK board.
-
-Build
-=====
-
-First, configure Buildroot for your i.MX6ULL EVK board:
-
-  make freescale_imx6ullevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - boot.vfat
-  - imx6ull-14x14-evk.dtb
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.bin
-  - u-boot.imx
-  - zImage
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=./output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template.
-
-Boot the i.MX6ULL EVK board
-===========================
-
-To boot your newly created system (refer to the i.MX 6ULL EVK Quick Start Guide [1] for guidance):
-- insert the SD card in the micro SD slot of the board;
-- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
-- power on the board.
-
-Enjoy!
-
-References
-==========
-[1] https://www.nxp.com/files-static/32bit/doc/brochure/IMX6ULLQSG.pdf

board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch

@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
++++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
++# mkimage source config file
++IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
++# How to create a cpp processed config file, they all use the same source
++%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
++u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
++u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
++SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
++targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+

board/freescale/imx8mnevk/readme.txt

@@ -1,73 +0,0 @@
-***************************
-Freescale i.MX8MN EVK board
-***************************
-
-This file documents the Buildroot support for the i.MX8M Nano EVK board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8MN EVK board:
-
-  make freescale_imx8mnevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - bl31.bin
-  - boot.vfat
-  - ddr4_201810_fw.bin
-  - ddr_fw.bin
-  - fsl-imx8mn-ddr4-evk.dtb
-  - Image
-  - imx8-boot-sd.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.bin
-  - u-boot.imx
-  - u-boot.itb
-  - u-boot-nodtb.bin
-  - u-boot-spl.bin
-  - u-boot-spl-ddr.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8MN EVK board
-==========================
-
-To boot your newly created system (refer to the i.MX8MNano EVK Quick Start Guide
-[1] for guidance):
-- insert the SD card in the SD slot of the board;
-- Configure the switches as follows (X = "don't care"):
-SW1101:	1100XXXXXX [D1-D10]
-SW1102:	XXXXXXXXXX [D1-D10]
-- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
-- power on the board.
-
-Enjoy!
-
-References
-==========
-[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK

board/freescale/imx8qmmek/readme.txt

@@ -1,76 +0,0 @@
-***************************
-Freescale i.MX8QM MEK board
-***************************
-
-This file documents the Buildroot support for the NXP i.MX8QM MEK board.
-
-You will find a reference to the board on nxp.com:
-https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-8quadmax-multisensory-enablement-kit-mek:MCIMX8QM-CPU
-
-You can also find the get started guide here:
-https://www.nxp.com/document/guide/get-started-with-the-i.mx-8quadmax-mek:GS-iMX-8QM-MEK
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8QM MEK board:
-
-$ make freescale_imx8qmmek_defconfig
-
-Build all components:
-
-$ make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - fsl-imx8qm-mek.dtb
-  - Image
-  - imx8-boot-sd.bin
-  - mkimg.commit
-  - mx8qm-mek-scfw-tcm.bin
-  - mx8qm-val-scfw-tcm.bin
-  - mx8qm-a0-ddr4-scfw-tcm.bin
-  - mx8qm-a0-mek-scfw-tcm.bin
-  - mx8qm-a0-val-scfw-tcm.bin
-  - mx8qm-ddr4-scfw-tcm.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf.bin
-  - u-boot.bin
-  - u-boot-hash.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8QM MEK board
-==========================
-
-To boot your newly created system:
-- insert the SD card in the SD slot of the board;
-- Configure the boot switch as follows:
-SW2:	OFF	OFF	ON	ON	OFF	OFF
-- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
-- power on the board.
-
-Enjoy!

board/friendlyarm/nanopi-neo4/extlinux.conf

@@ -1,4 +0,0 @@
-label NanoPi Neo4 linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-nanopi-neo4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait

board/friendlyarm/nanopi-neo4/genimage.cfg

@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/friendlyarm/nanopi-neo4/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf

board/friendlyarm/nanopi-neo4/readme.txt

@@ -1,53 +0,0 @@
-Intro
-=====
-
-NanoPi Neo4 is a RK3399 SoC based ARM64 board.
-
-
-Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
-Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
-
-Build
-=====
-
-Run NanoPi Neo4 configuration
-
-  $ make nanopi_neo4_defconfig
-
-To build, run make comamnd.
-
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.bin
-├── bl31.elf
-├── Image
-├── rk3399-nanopi-neo4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-├── u-boot.itb
-├── u-boot-spl-dtb.bin
-├── u-boot-tpl-dtb.bin
-├── u-boot-tpl-dtb.img
-└── u-boot-tpl-spl-dtb.img
-
-Creating bootable SD card:
-=========================
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
---------------
-
-Baudrate for this board is 1500000

board/friendlyarm/nanopi-r1/boot.cmd

@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-r1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r

board/friendlyarm/nanopi-r1/genimage.cfg

@@ -1,36 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-r1.dtb",
-			"boot.scr"
-		}
-	}
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/friendlyarm/nanopi-r1/kernel/linux-extras.config

@@ -1,2 +0,0 @@
-# USB ethernet
-CONFIG_USB_RTL8152=y

board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts

@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi-R1";
-	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-
-	aliases {
-		serial1 = &uart3;
-		ethernet0 = &emac;
-		ethernet1 = &emac;
-		ethernet2 = &sdio_wifi;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-	};
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		/delete-node/ status;
-		/delete-node/ pwr;
-		led1 {
-			label = "LED1";
-			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "LED2";
-			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "netdev";
-		};
-
-		led3 {
-			label = "LED3";
-			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	r_gpio_keys {
-		compatible = "gpio-keys";
-		input-name = "k1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_npi>;
-
-		/delete-node/ k1;
-		reset {
-			label = "reset";
-			linux,code = <BTN_1>;
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	sdio_wifi: sdio_wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};

board/friendlyarm/nanopi-r1/readme.txt

@@ -1,29 +0,0 @@
-NanoPi R1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi R1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make nanopi_r1_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX

board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig

@@ -1,22 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_SPL=y
-CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=408
-CONFIG_DRAM_ZQ=3881979
-CONFIG_DRAM_ODT_EN=y
-CONFIG_MACPWR="PD6"
-# CONFIG_VIDEO_DE2 is not set
-CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CLK_FREQ=480000000
-# CONFIG_CMD_FLASH is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-CONFIG_SUN8I_EMAC=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_MMC_SUNXI_SLOT_EXTRA=2

board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts

@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
-	model = "FriendlyARM NanoPi R1";
-	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&pio {
-	gmac_power_pin_nanopi: gmac_power_pin@0 {
-		pins = "PD6";
-		function = "gpio_out";
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};

board/grinn/chiliboard/post-image.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"

board/grinn/liteboard/post-image.sh

@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"

board/hardkernel/odroidc2/boot.ini

@@ -0,0 +1,176 @@
+ODROIDC2-UBOOT-CONFIG
+
+########################################################################
+# Changes made to this are overwritten every time there's a new upgrade
+# To make your changes permanent change it on 
+# boot.ini.default
+# After changing it on boot.ini.default run the bootini command to
+# rewrite this file with your personal permanent settings.
+# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini
+########################################################################
+
+# Possible screen resolutions
+# Uncomment only a single Line! The line with setenv written.
+# At least one mode must be selected.
+
+# Custom modeline!
+# To use custom modeline you need to disable all the below resolutions
+# and setup your own! 
+# For more information check our wiki: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
+# Example below:
+# setenv m "custombuilt" 
+# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
+
+# 480 Lines (720x480)
+# setenv m "480i60hz" # Interlaced 60Hz
+# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
+# setenv m "480p60hz" # 480 Progressive 60Hz
+# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
+
+# 576 Lines (720x576)
+# setenv m "576i50hz" # Interlaced 50Hz
+# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
+# setenv m "576p50hz" # Progressive 50Hz
+# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
+
+# 720 Lines (1280x720)
+# setenv m "720p50hz" # 50Hz
+# setenv m "720p60hz" # 60Hz
+
+# 1080 Lines (1920x1080)
+# setenv m "1080i60hz" # Interlaced 60Hz
+setenv m "1080p60hz" # Progressive 60Hz
+# setenv m "1080i50hz" # Interlaced 50Hz
+# setenv m "1080p50hz" # Progressive 50Hz
+# setenv m "1080p24hz" # Progressive 24Hz
+
+# 4K (3840x2160)
+# setenv m "2160p30hz"    # Progressive 30Hz
+# setenv m "2160p25hz"    # Progressive 25Hz
+# setenv m "2160p24hz"    # Progressive 24Hz
+# setenv m "smpte24hz"    # Progressive 24Hz SMPTE
+# setenv m "2160p50hz"    # Progressive 50Hz
+# setenv m "2160p60hz"    # Progressive 60Hz
+# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+
+### VESA modes ###
+# setenv m "640x480p60hz"
+# setenv m "800x480p60hz"
+# setenv m "480x800p60hz"
+# setenv m "800x600p60hz"
+# setenv m "1024x600p60hz"
+# setenv m "1024x768p60hz"  
+# setenv m "1280x800p60hz"
+# setenv m "1280x1024p60hz"
+# setenv m "1360x768p60hz"
+# setenv m "1440x900p60hz"
+# setenv m "1600x900p60hz"
+# setenv m "1680x1050p60hz"
+# setenv m "1600x1200p60hz"
+# setenv m "1920x1200p60hz"
+# setenv m "2560x1080p60hz"
+# setenv m "2560x1440p60hz"
+# setenv m "2560x1600p60hz"
+# setenv m "3440x1440p60hz"
+
+# HDMI BPP Mode
+setenv m_bpp "32"
+# setenv m_bpp "24"
+# setenv m_bpp "16"
+
+# HDMI DVI/VGA modes
+# By default its set to HDMI, if needed change below.
+# Uncomment only a single Line.
+# setenv vout "dvi"
+# setenv vout "vga"
+
+# HDMI HotPlug Detection control
+# Allows you to force HDMI thinking that the cable is connected.
+# true = HDMI will believe that cable is always connected
+# false = will let board/monitor negotiate the connection status
+setenv hpd "true"
+# setenv hpd "false"
+
+# Monitor output
+# Controls if HDMI PHY should output anything to the monitor
+setenv monitor_onoff "false" # true or false
+
+# Server Mode (aka. No Graphics)
+# Setting nographics to 1 will disable all video subsystem
+# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
+setenv nographics "0"
+
+# Meson Timer
+# 1 - Meson Timer
+# 0 - Arch Timer 
+# Using meson_timer improves the video playback however it breaks KVM (virtualization).
+# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
+setenv mesontimer "1"
+
+# UHS (Ultra High Speed) MicroSD mode enable/disable
+setenv disableuhs "false"
+
+# MicroSD Card Detection enable/disable
+# Force the MMC controlled to believe that a card is connected.
+setenv mmc_removable "true"
+
+# USB Multi WebCam tweak
+# Only enable this if you use it.
+setenv usbmulticam "false"
+
+# Default Console Device Setting
+setenv condev "console=ttyS0,115200n8 console=tty0"   # on both
+
+# CPU Frequency / Cores control
+###########################################
+### WARNING!!! WARNING!!! WARNING!!!
+# Before changing anything here please read the wiki entry: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
+#
+# MAX CPU's
+# setenv maxcpus "1"
+# setenv maxcpus "2"
+# setenv maxcpus "3"
+setenv maxcpus "4"
+
+# MAX Frequency
+# setenv max_freq "2016"  # 2.016GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1920"  # 1.920GHz
+# setenv max_freq "1896"  # 1.896GHz
+# setenv max_freq "1752"  # 1.752GHz
+# setenv max_freq "1680"  # 1.680GHz
+# setenv max_freq "1656"  # 1.656GHz
+setenv max_freq "1536"  # 1.536GHz
+
+
+
+###########################################
+
+# Boot Arguments
+if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
+
+setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
+
+# Booting
+
+setenv loadaddr "0x11000000"
+setenv dtb_loadaddr "0x1000000"
+setenv initrd_loadaddr "0x13000000"
+
+fatload mmc 0:1 ${loadaddr} Image
+fatload mmc 0:1 ${dtb_loadaddr} meson64_odroidc2.dtb
+fdt addr ${dtb_loadaddr}
+
+if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
+if test "${mesontimer}" = "1"; then fdt rm /timer; fi
+
+if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
+if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
+if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
+if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
+
+booti ${loadaddr} - ${dtb_loadaddr}

board/hardkernel/odroidc2/genimage.cfg

@@ -0,0 +1,27 @@
+image boot.vfat {
+	vfat {
+		files = {
+			"boot.ini",
+			"Image",
+			"meson64_odroidc2.dtb"
+		}
+	}
+	size = 32M
+}
+
+image sdcard.img {
+	hdimage {
+	}
+
+	partition vfat {
+		partition-type = 0xC
+		image = "boot.vfat"
+		offset = 1048576
+	}
+
+	partition rootfs {
+		partition-type = 0x83
+		image = "rootfs.ext4"
+		size = 512M
+	}
+}

board/hardkernel/odroidc2/post-image.sh

@@ -0,0 +1,19 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc
+dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc

board/hardkernel/odroidc2/readme.txt

@@ -0,0 +1,53 @@
+ODROID-C2
+
+Intro
+=====
+To be able to use ODROID-C2 board with the images generated by
+Buildroot, you have to prepare the SDCard or eMMC.
+
+How to build it
+===============
+
+  $ make odroidc2_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- Image
+    +-- boot.ini                   [1]
+    +-- boot.vfat
+    +-- meson64_odroidc2.dtb
+    +-- rootfs.ext2
+    +-- rootfs.ext4
+    +-- rootfs.tar
+    +-- sdcard.img
+    `-- u-boot.bin
+
+[1] This is the ODROID-C2 configuration file used in u-boot.
+
+How to write the SD card or eMMC
+================================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the SDcard into your ODROID-C2, and power it up. Your new system
+should come up now.

board/olpc/genimage.cfg

@@ -1,9 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/olpc/linux.config

@@ -1,66 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=y
-CONFIG_RFKILL=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_LIBERTAS=m
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TABLET=y
-CONFIG_SERIO_OLPC_APSP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_BATTERY_OLPC=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_DRM=y
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FB_SIMPLE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_FONTS=y
-CONFIG_FONT_TER16x32=y

board/olpc/olpc.fth

@@ -1,46 +0,0 @@
-\ OLPC XO boot script
-
-: (visible)  " unfreeze visible" evaluate  ;
-' (visible) catch  drop  forget (visible)
-
-" /aliases" find-device " last" get-property
-abort" No last alias"
-" /pci/sd@c"          2over substring?  if  " root=/dev/mmcblk0p1 " to boot-file  then
-" /sd/sdhci@d4280000" 2over substring?  if  " root=/dev/mmcblk1p1 " to boot-file  then
-" /pci/usb@"          2over substring?  if  " root=/dev/sda1 "      to boot-file  then
-" /usb@"              2over substring?  if  " root=/dev/sda1 "      to boot-file  then
-2drop
-
-root-device " compatible" get-property dend  if  0 0  then  ( compatible$ )
-" olpc,xo-1.75" 2over sindex -1 > if  ( compatible$ )
-   \ Version check on XO-1.75
-   " mrvl,mmp2" 2over sindex -1 =  if ( compatible$ )
-      2drop                           ( )
-      cr
-      ." Firmware Q4E00 or newer is needed to boot a Devicetree enabled kernel." cr
-      cr
-      ." One way to update is to copy http://dev.laptop.org/~quozl/q4e00ja.rom" cr
-      ." to a FAT partition on a USB flash stick and run ""flash u:\q4e00ja.rom""" cr
-      cr
-      ." Aborting boot." cr
-      " show-sad" evaluate
-      abort
-   then
-then ( compatible$ )
-
-" mmp" 2swap sindex -1 > if
-   \ A Marvell MMP-based machine
-   " last:\boot\zImage" to boot-device
-   boot-file " console=ttyS2,115200 " $cat2 to boot-file
-else
-    \ Assume XO-1
-   " last:\boot\bzImage" to boot-device
-   boot-file " console=ttyS0,115200 reboot=pci " $cat2 to boot-file
-then
-
-\ Pick a terminal that looks better on the XO screen
-root-device " architecture" get-property dend  if  0 0  else  1-  then
-" OLPC" $=  if  boot-file " fbcon=font:TER16x32 vt.color=0xf0 " $cat2 to boot-file  then
-
-boot-file " console=tty0 rootwait" $cat2 to boot-file
-boot

board/olpc/post-build.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-install -m 0644 -D $BOARD_DIR/olpc.fth $TARGET_DIR/boot/olpc.fth

board/olpc/readme.txt

@@ -1,78 +0,0 @@
-OLPC XO Laptops
-===============
-
-This document explains how to build and run images that run on the OLPC
-XO laptops.
-
-Supported models
-----------------
-
-* OLPC XO-1
-  The original NS Geode based OLPC laptop, uses the x86 architecture.
-
-* OLPC XO-7.5
-  The ARM-based laptop. Needs a recent enough firmware to provide a good
-  enough flattened device tree to the kernel.
-
-Configure and build
-===================
-
-  $ make olpc_xo1_defconfig   # Configure for XO-1
-
-or:
-
-  $ make olpc_xo175_defconfig # Configure for XO-1.75
-
-Then:
-
-  $ make menuconfig           # Customize the build configuration
-  $ make                      # Build
-
-Create the bootable media
-=========================
-
-When the build is finished, the resulting image file will be called
-"sdcard.img". It can be written directly to a SD-card or and USB flash stick.
-
-Please double check that you're using the right device (e.g. with "lsblk"
-command). Doing the following will DESTROY ALL DATA that's currently on the
-media.
-
-  # cat output/images/sdcard.img >/dev/<device>
-
-Preparing the machine
-=====================
-
-Firmware security
------------------
-
-Most OLPC machines were shipped with the security system that disallows
-booting unsigned software. If this is the case with your machine, in order
-to run the image you've built on it you'll need to get a developer key and
-deactivate the security system.
-
-The procedure is descriped in the OLPC wiki:
-http://wiki.laptop.org/go/Activation_and_Developer_Keys
-
-Firmware upgrade
-----------------
-
-It is always preferrable to use an up to date firmware. The firmware images
-are available at http://wiki.laptop.org/go/Firmware. For the XO-1.75 laptop
-to boot the mainline kernel a firmware Q4E00JA or newer is needed. You can
-get it at http://dev.laptop.org/~quozl/q4e00ja.rom.
-
-To update the firmware, place the .rom file on to your bootable media,
-connect a charged battery pack and a wall adapter, and enter the Open
-Firmware prompt by pressing ESC during the early boot (needs an unlocked
-laptop -- see "Firmware security" above). Then use the "flash" command
-to update the firmware:
-
-  ok flash ext:\q4e00ja.rom   \ Flash the "q4e00ja.rom" from the SD card
-  ok flash u:\q4e00ja.rom     \ Flash the "q4e00ja.rom" from USB stick
-
-Booting the machine
-===================
-
-Once your machine is unlocked, it will automatically boot from your media
-wherever it will detect it attached to the USB bus or the SD card slot.

board/olpc/xo-1.75/linux.config

@@ -1,47 +0,0 @@
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_MMP2_DT=y
-CONFIG_MACH_MMP3_DT=y
-CONFIG_USB_EHCI_MV_U2O=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=16
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_REGULATOR_88PG86X=m
-CONFIG_VIDEO_MMP_CAMERA=y
-CONFIG_DRM_ARMADA=y
-CONFIG_DRM_DISPLAY_CONNECTOR=m
-CONFIG_DRM_SIMPLE_BRIDGE=m
-CONFIG_DRM_ETNAVIV=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_USB_EHCI_MV=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_OLPC_XO175=y
-CONFIG_OLPC_XO175_EC=y
-CONFIG_PHY_PXA_USB=y
-CONFIG_PHY_MMP3_USB=y
-CONFIG_CRYPTO_LZO=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MTD_SPI_NOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=m
-CONFIG_I2C_PXA=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_SPI_SLAVE=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RT5631=y
-CONFIG_PWRSEQ_SD8787=m
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ZFORCE=y

board/olpc/xo-1/linux.config

@@ -1,81 +0,0 @@
-# CONFIG_64BIT is not set
-CONFIG_IOSF_MBI=y
-CONFIG_MGEODE_LX=y
-CONFIG_X86_MSR=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x400000
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_ACPI is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_OLPC=y
-CONFIG_OLPC_XO1_PM=y
-CONFIG_OLPC_XO1_RTC=y
-CONFIG_OLPC_XO1_SCI=y
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_ARCH_MMAP_RND_BITS=16
-CONFIG_REFCOUNT_FULL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_CMA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_CAFE=y
-CONFIG_MTD_UBI=y
-CONFIG_CS5535_MFGPT=y
-CONFIG_CS5535_CLOCK_EVENT_SRC=y
-CONFIG_SENSORS_LIS3_SPI=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_VIA is not set
-CONFIG_NVRAM=y
-CONFIG_SCx200_ACB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_CS5535=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_GEODE_WDT=y
-CONFIG_MFD_CS5535=y
-CONFIG_MFD_MAX8925=y
-CONFIG_VIDEO_CAFE_CCIC=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_VESA=y
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_BACKLIGHT_MAX8925=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_CS5535AUDIO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_FB_OLPC_DCON=y
-CONFIG_XO1_RFKILL=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_GENERIC_PHY=y
-CONFIG_PROC_KCORE=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_UBIFS_FS=y
-CONFIG_PCI=y
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_MESH=y
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS_THINFIRM_USB=m

board/qemu/aarch64-virt/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 # qemu_aarch64_virt_defconfig
+  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/arm-versatile/readme.txt

@@ -1,10 +1,12 @@
 Run the emulation with:
 
-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user # qemu_arm_versatile_defconfig
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user
 
 Or for the noMMU emulation:
 
-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111 # qemu_arm_versatile_nommu_defconfig
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0

board/qemu/arm-vexpress-tz/readme.txt

@@ -29,6 +29,8 @@ number of cores.
 Note: "-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic"
 brings network support that is used i.e. in OP-TEE regression tests.
 
+Tested with QEMU 2.12.0, and 3.1.0.
+
 
 -- Boot Details --
 

board/qemu/arm-vexpress/readme.txt

@@ -1,9 +1,11 @@
 Run the emulation with:
 
-  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user # qemu_arm_vexpress_defconfig
+  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
 
 If you want to emulate more cores change "-smp 1" to "-smp 2" for
 dual-core or even "smp -4" for a quad-core configuration.
+
+Tested with QEMU 2.12.0

board/qemu/csky/readme.txt

@@ -1,15 +1,12 @@
 Run with qemu:
 
 For ck860 smp:
- qemu-system-cskyv2 -M virt -cpu ck860 -smp 2 -nographic -kernel vmlinux # qemu_csky860_virt_defconfig
+ qemu-system-cskyv2 -M virt -cpu ck860 -smp 2 -nographic -kernel vmlinux
 
-For ck807:
- qemu-system-cskyv2 -M virt -nographic -kernel vmlinux # qemu_csky807_virt_defconfig
-
-For ck810:
- qemu-system-cskyv2 -M virt -nographic -kernel vmlinux # qemu_csky810_virt_defconfig
+For ck810/ck807:
+ qemu-system-cskyv2 -M virt -nographic -kernel vmlinux
 
 For ck610:
- qemu-system-cskyv1 -M virt -nographic -kernel vmlinux # qemu_csky610_virt_defconfig
+ qemu-system-cskyv1 -M virt -nographic -kernel vmlinux
 
 The login prompt will appear in the terminal that started Qemu. Username is root and no password.

board/qemu/m68k-mcf5208/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-m68k -M mcf5208evb -cpu m5208 -kernel output/images/vmlinux -nographic # qemu_m68k_mcf5208_defconfig
+ qemu-system-m68k -M mcf5208evb -cpu m5208 -kernel output/images/vmlinux -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/m68k-q800/readme.txt

@@ -1,5 +1,8 @@
 Run the emulation with:
 
- qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0" # qemu_m68k_q800_defconfig
+ qemu-system-m68k -M q800 -kernel output/images/vmlinux -nographic -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0"
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.11.0 from https://github.com/vivier/qemu-m68k
+You need following branch: q800-v2.11.0

board/qemu/microblazebe-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch

@@ -1,34 +0,0 @@
-From e96b73478232aa42b773cd19371808af69fd4b95 Mon Sep 17 00:00:00 2001
-From: Romain Naour <romain.naour@gmail.com>
-Date: Sat, 25 Apr 2020 09:49:11 +0200
-Subject: [PATCH] net: xilinx: xemaclite: add 2.00.b revision
-
-Patch added for the kernel 3.14
-- fix networking in Qemu using a small patch
-- disable DTS, because linux.bin does not include any DTB the
-  default Qemu included DTB is used and this is okay and works fine
-
-https://git.buildroot.net/buildroot/commit/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch?id=fa2798548368d51998fad18d7f6d1ae0ed065b33
-
-[Romain: convert to git format]
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
-Cc: Waldemar Brodkorb <wbx@openadk.org>
----
- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-index 0de52e70abcc..d8c13140ca77 100644
---- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-@@ -1278,6 +1278,7 @@ static const struct of_device_id xemaclite_of_match[] = {
- 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
-+	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
- 	{ /* end of list */ },
--- 
-2.25.3
-

board/qemu/microblazebe-mmu/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazebe_mmu_defconfig
+ qemu-system-microblaze -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/microblazebe-mmu/xilinx-xemaclite.patch

@@ -0,0 +1,11 @@
+diff -Nur linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-03-31 05:40:15.000000000 +0200
++++ linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-04-11 22:53:42.000000000 +0200
+@@ -1249,6 +1249,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },

board/qemu/microblazeel-mmu/0001-net-xilinx-xemaclite-add-2.00.b-revision.patch

@@ -1,34 +0,0 @@
-From e96b73478232aa42b773cd19371808af69fd4b95 Mon Sep 17 00:00:00 2001
-From: Romain Naour <romain.naour@gmail.com>
-Date: Sat, 25 Apr 2020 09:49:11 +0200
-Subject: [PATCH] net: xilinx: xemaclite: add 2.00.b revision
-
-Patch added for the kernel 3.14
-- fix networking in Qemu using a small patch
-- disable DTS, because linux.bin does not include any DTB the
-  default Qemu included DTB is used and this is okay and works fine
-
-https://git.buildroot.net/buildroot/commit/board/qemu/microblazebe-mmu/xilinx-xemaclite.patch?id=fa2798548368d51998fad18d7f6d1ae0ed065b33
-
-[Romain: convert to git format]
-Signed-off-by: Romain Naour <romain.naour@gmail.com>
-Cc: Waldemar Brodkorb <wbx@openadk.org>
----
- drivers/net/ethernet/xilinx/xilinx_emaclite.c | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/drivers/net/ethernet/xilinx/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-index 0de52e70abcc..d8c13140ca77 100644
---- a/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-+++ b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
-@@ -1278,6 +1278,7 @@ static const struct of_device_id xemaclite_of_match[] = {
- 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
-+	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
- 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
- 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
- 	{ /* end of list */ },
--- 
-2.25.3
-

board/qemu/microblazeel-mmu/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio # qemu_microblazeel_mmu_defconfig
+ qemu-system-microblazeel -M petalogix-s3adsp1800 -kernel output/images/linux.bin -serial stdio
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/microblazeel-mmu/xilinx-xemaclite.patch

@@ -0,0 +1,11 @@
+diff -Nur linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c
+--- linux-3.14.orig/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-03-31 05:40:15.000000000 +0200
++++ linux-3.14/drivers/net/ethernet/xilinx/xilinx_emaclite.c	2014-04-11 22:53:42.000000000 +0200
+@@ -1249,6 +1249,7 @@
+ 	{ .compatible = "xlnx,opb-ethernetlite-1.01.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-1.00.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.00.a", },
++	{ .compatible = "xlnx,xps-ethernetlite-2.00.b", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-2.01.a", },
+ 	{ .compatible = "xlnx,xps-ethernetlite-3.00.a", },
+ 	{ /* end of list */ },

board/qemu/mips32r2-malta/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
- qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user # qemu_mips32r2_malta_defconfig
+ qemu-system-mips -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
+
+Tested with QEMU 2.12.0

board/qemu/mips32r2el-malta/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
- qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user # qemu_mips32r2el_malta_defconfig
+ qemu-system-mipsel -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer. No keyboard support has been
 enabled.
+
+Tested with QEMU 2.12.0

board/qemu/mips32r6-malta/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips32r6_malta_defconfig
+qemu-system-mips -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/mips32r6el-malta/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic # qemu_mips32r6el_malta_defconfig
+qemu-system-mipsel -M malta -cpu mips32r6-generic -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -net nic,model=pcnet -net user -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/mips64-malta/readme.txt

@@ -1,6 +1,8 @@
 Run the emulation with:
 
- qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" # qemu_mips64_malta_defconfig
+ qemu-system-mips64 -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda"
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0

board/qemu/mips64el-malta/readme.txt

@@ -1,6 +1,8 @@
 Run the emulation with:
 
- qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" # qemu_mips64el_malta_defconfig
+ qemu-system-mips64el -M malta -kernel output/images/vmlinux -serial stdio -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda"
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0

board/qemu/mips64r6-malta/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips64r6_malta_defconfig
+ qemu-system-mips64 -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/mips64r6el-malta/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic # qemu_mips64r6el_malta_defconfig
+ qemu-system-mips64el -M malta -cpu I6400 -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/hda" -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/nios2-10m50/linux.fragment

@@ -1,3 +1,3 @@
 # Embed the DTB in the kernel image
 CONFIG_NIOS2_DTB_SOURCE_BOOL=y
-CONFIG_NIOS2_DTB_SOURCE="10m50_devboard.dts"
+CONFIG_NIOS2_DTB_SOURCE="arch/nios2/boot/dts/10m50_devboard.dts"

board/qemu/nios2-10m50/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-  qemu-system-nios2 -kernel output/images/vmlinux -nographic # qemu_nios2_10m50_defconfig
+  qemu-system-nios2 -kernel output/images/vmlinux -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0.

board/qemu/or1k/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
- qemu-system-or1k -kernel output/images/vmlinux -nographic # qemu_or1k_defconfig
+ qemu-system-or1k -kernel output/images/vmlinux -nographic
 
 The login prompt will appear in the terminal that started Qemu.
 
 Ethernet support is not working, yet.
+
+Tested with QEMU 2.12.0.

board/qemu/post-image.sh

@@ -1,55 +0,0 @@
-#!/bin/bash
-
-QEMU_BOARD_DIR="$(dirname $0)"
-DEFCONFIG_NAME="$(basename $2)"
-README_FILES="${QEMU_BOARD_DIR}/*/readme.txt"
-START_QEMU_SCRIPT="${BINARIES_DIR}/start-qemu.sh"
-
-if [[ "${DEFCONFIG_NAME}" =~ ^"qemu_*" ]]; then
-    # Not a Qemu defconfig, can't test.
-    exit 0
-fi
-
-# Search for "# qemu_*_defconfig" tag in all readme.txt files.
-# Qemu command line on multilines using back slash are accepted.
-QEMU_CMD_LINE=$(sed -r ':a; /\\$/N; s/\\\n//; s/\t/ /; ta; /# '${DEFCONFIG_NAME}'$/!d; s/#.*//' ${README_FILES})
-
-if [ -z "${QEMU_CMD_LINE}" ]; then
-    # No Qemu cmd line found, can't test.
-    exit 0
-fi
-
-# Replace output/images path by ${IMAGE_DIR} since the script
-# will be in the same directory as the kernel and the rootfs images.
-QEMU_CMD_LINE="${QEMU_CMD_LINE//output\/images/\${IMAGE_DIR\}}"
-
-# Remove -serial stdio if present, keep it as default args
-DEFAULT_ARGS="$(sed -r -e '/-serial stdio/!d; s/.*(-serial stdio).*/\1/' <<<"${QEMU_CMD_LINE}")"
-QEMU_CMD_LINE="${QEMU_CMD_LINE//-serial stdio/}"
-
-# Disable graphical output and redirect serial I/Os to console
-case ${DEFCONFIG_NAME} in
-  (qemu_sh4eb_r2d_defconfig|qemu_sh4_r2d_defconfig)
-    # Special case for SH4
-    SERIAL_ARGS="-serial stdio -display none"
-    ;;
-  (*)
-    SERIAL_ARGS="-nographic"
-    ;;
-esac
-
-cat <<-_EOF_ > "${START_QEMU_SCRIPT}"
-	#!/bin/sh
-	IMAGE_DIR="\${0%/*}/"
-
-	if [ "\${1}" = "serial-only" ]; then
-	    EXTRA_ARGS='${SERIAL_ARGS}'
-	else
-	    EXTRA_ARGS='${DEFAULT_ARGS}'
-	fi
-
-	export PATH="${HOST_DIR}/bin:\${PATH}"
-	exec ${QEMU_CMD_LINE} \${EXTRA_ARGS}
-_EOF_
-
-chmod +x "${START_QEMU_SCRIPT}"

board/qemu/ppc-g3beige/readme.txt

@@ -1,6 +1,8 @@
 Run the emulation with:
 
-  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 rootwait root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user # qemu_ppc_g3beige_defconfig
+  qemu-system-ppc -M g3beige -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -append "console=ttyS0 rootwait root=/dev/hda" -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0

board/qemu/ppc-mac99/readme.txt

@@ -1,3 +1,5 @@
 Run the emulation with:
 
-  qemu-system-ppc -nographic -vga none -M mac99 -cpu g4 -m 1G -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -net nic,model=sungem -net user -append "root=/dev/sda" # qemu_ppc_mac99_defconfig
+  qemu-system-ppc -nographic -vga none -M mac99 -cpu g4 -m 1G -kernel output/images/vmlinux -drive file=output/images/rootfs.ext2,format=raw -net nic,model=sungem -net user -append "root=/dev/sda"
+
+Tested with QEMU 3.1.0

board/qemu/ppc-mpc8544ds/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio -net nic,model=e1000 -net user # qemu_ppc_mpc8544ds_defconfig
+ qemu-system-ppc -M mpc8544ds -kernel output/images/vmlinux -serial stdio -net nic,model=e1000 -net user
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/ppc-virtex-ml507/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0" -dtb output/images/virtex440-ml507.dtb # qemu_ppc_virtex_ml507_defconfig
+ qemu-system-ppc -M virtex-ml507 -kernel output/images/vmlinux -m 256 -nographic -append "console=ttyS0" -dtb output/images/virtex440-ml507.dtb
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/ppc64-e5500/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 rootwait root=/dev/vda" -serial mon:stdio -nographic # qemu_ppc64_e5500_defconfig
+ qemu-system-ppc64 -M ppce500 -cpu e5500 -m 256 -kernel output/images/uImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "console=ttyS0 rootwait root=/dev/vda" -serial mon:stdio -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/ppc64-pseries/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
- qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses # qemu_ppc64_pseries_defconfig
+ qemu-system-ppc64 -M pseries -cpu POWER7 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/ppc64le-pseries/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses # qemu_ppc64le_pseries_defconfig
+qemu-system-ppc64 -M pseries -cpu POWER8 -m 256 -kernel output/images/vmlinux -append "console=hvc0 rootwait root=/dev/sda" -drive file=output/images/rootfs.ext2,if=scsi,index=0,format=raw -serial stdio -display curses
 
 The login prompt will appear in the terminal window.
+
+Tested with QEMU 2.12.0

board/qemu/riscv32-virt/readme.txt

@@ -1,5 +1,7 @@
 Run Linux in emulation with:
 
-  qemu-system-riscv32 -M virt -kernel output/images/fw_jump.elf -device loader,file=output/images/Image,addr=0x80400000 -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv32_virt_defconfig
+  qemu-system-riscv32 -M virt -kernel output/images/fw_jump.elf -device loader,file=output/images/Image,addr=0x80400000 -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 3.1

board/qemu/riscv64-virt/readme.txt

@@ -1,5 +1,7 @@
 Run Linux in emulation with:
 
-  qemu-system-riscv64 -M virt -kernel output/images/fw_jump.elf -device loader,file=output/images/Image,addr=0x80200000 -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic # qemu_riscv64_virt_defconfig
+  qemu-system-riscv64 -M virt -kernel output/images/fw_jump.elf -device loader,file=output/images/Image,addr=0x80200000 -append "rootwait root=/dev/vda ro" -drive file=output/images/rootfs.ext2,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 -netdev user,id=net0 -device virtio-net-device,netdev=net0 -nographic
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 3.1

board/qemu/sh4-r2d/patches/linux/0001-Revert-serial-sh-sci-increase-RX-FIFO-trigger-defaul.patch

@@ -0,0 +1,61 @@
+From aaaced6d2d6f796ed77e4725ed7ccbedb189c180 Mon Sep 17 00:00:00 2001
+From: Romain Naour <romain.naour@gmail.com>
+Date: Fri, 15 Jun 2018 17:43:38 +0200
+Subject: [PATCH] Revert: serial: sh-sci: increase RX FIFO trigger defaults for
+ (H)SCIF
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This reverts commit 18e8cf159177100e69d528293f8cf6875c0b1bca (kernel)
+
+The last Qemu kernel update [1] introduced a regresion in sh4 SCIF
+serial device. Some keyboard presses are very slow to be taken into
+account, perhaps not even taken into account at all. This would
+explain why our test infrastructure doesn’t manage to login as root
+[2][3][4].
+
+git bisect reported a kernel patch from 4.11, increasing RX FIFO
+trigger defaults value for sh-sci (H)SCIF. The kernel patch itself
+looks good but the Qemu emulation is not ready to handle this new
+setting.
+
+From Qemu (2.12.0): target/sh4/README.sh4
+"Configuration of the second serial port (SCIF) is supported. FIFO
+handling infrastructure has been started but is not completed yet."
+
+In order to be able to test sh4 architecture with newer kernel,
+revert to the old behaviour.
+
+[1] https://git.buildroot.net/buildroot/commit/?id=03fb00f2175cdb4565e26fcb9b3da1c1059de1bd
+[2] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006425
+[3] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006427
+[4] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006426
+
+Signed-off-by: Romain Naour <romain.naour@gmail.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+---
+ drivers/tty/serial/sh-sci.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
+index ab757546c6db..138e4dec44fb 100644
+--- a/drivers/tty/serial/sh-sci.c
++++ b/drivers/tty/serial/sh-sci.c
+@@ -2793,11 +2793,8 @@ static int sci_init_single(struct platform_device *dev,
+ 		sci_port->rx_trigger = 32;
+ 		break;
+ 	case PORT_SCIF:
+-		if (p->regtype == SCIx_SH7705_SCIF_REGTYPE)
+-			/* RX triggering not implemented for this IP */
+-			sci_port->rx_trigger = 1;
+-		else
+-			sci_port->rx_trigger = 8;
++		/* RX triggering not implemented in Qemu emulation */
++		sci_port->rx_trigger = 1;
+ 		break;
+ 	default:
+ 		sci_port->rx_trigger = 1;
+-- 
+2.14.4
+

board/qemu/sh4-r2d/readme.txt

@@ -1,6 +1,8 @@
 Run the emulation with:
 
-  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user # qemu_sh4_r2d_defconfig
+  qemu-system-sh4 -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0

board/qemu/sh4eb-r2d/patches/linux/0001-Revert-serial-sh-sci-increase-RX-FIFO-trigger-defaul.patch

@@ -0,0 +1,61 @@
+From aaaced6d2d6f796ed77e4725ed7ccbedb189c180 Mon Sep 17 00:00:00 2001
+From: Romain Naour <romain.naour@gmail.com>
+Date: Fri, 15 Jun 2018 17:43:38 +0200
+Subject: [PATCH] Revert: serial: sh-sci: increase RX FIFO trigger defaults for
+ (H)SCIF
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+This reverts commit 18e8cf159177100e69d528293f8cf6875c0b1bca (kernel)
+
+The last Qemu kernel update [1] introduced a regresion in sh4 SCIF
+serial device. Some keyboard presses are very slow to be taken into
+account, perhaps not even taken into account at all. This would
+explain why our test infrastructure doesn’t manage to login as root
+[2][3][4].
+
+git bisect reported a kernel patch from 4.11, increasing RX FIFO
+trigger defaults value for sh-sci (H)SCIF. The kernel patch itself
+looks good but the Qemu emulation is not ready to handle this new
+setting.
+
+From Qemu (2.12.0): target/sh4/README.sh4
+"Configuration of the second serial port (SCIF) is supported. FIFO
+handling infrastructure has been started but is not completed yet."
+
+In order to be able to test sh4 architecture with newer kernel,
+revert to the old behaviour.
+
+[1] https://git.buildroot.net/buildroot/commit/?id=03fb00f2175cdb4565e26fcb9b3da1c1059de1bd
+[2] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006425
+[3] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006427
+[4] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006426
+
+Signed-off-by: Romain Naour <romain.naour@gmail.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+---
+ drivers/tty/serial/sh-sci.c | 7 ++-----
+ 1 file changed, 2 insertions(+), 5 deletions(-)
+
+diff --git a/drivers/tty/serial/sh-sci.c b/drivers/tty/serial/sh-sci.c
+index ab757546c6db..138e4dec44fb 100644
+--- a/drivers/tty/serial/sh-sci.c
++++ b/drivers/tty/serial/sh-sci.c
+@@ -2793,11 +2793,8 @@ static int sci_init_single(struct platform_device *dev,
+ 		sci_port->rx_trigger = 32;
+ 		break;
+ 	case PORT_SCIF:
+-		if (p->regtype == SCIx_SH7705_SCIF_REGTYPE)
+-			/* RX triggering not implemented for this IP */
+-			sci_port->rx_trigger = 1;
+-		else
+-			sci_port->rx_trigger = 8;
++		/* RX triggering not implemented in Qemu emulation */
++		sci_port->rx_trigger = 1;
+ 		break;
+ 	default:
+ 		sci_port->rx_trigger = 1;
+-- 
+2.14.4
+

board/qemu/sh4eb-r2d/readme.txt

@@ -1,6 +1,8 @@
 Run the emulation with:
 
-  qemu-system-sh4eb -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user # qemu_sh4eb_r2d_defconfig
+  qemu-system-sh4eb -M r2d -kernel output/images/zImage -drive file=output/images/rootfs.ext2,if=ide,format=raw -append "rootwait root=/dev/sda console=ttySC1,115200 noiotrap" -serial null -serial stdio -net nic,model=rtl8139 -net user
 
 The login prompt will appear in the terminal that started Qemu.
 The graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0

board/qemu/sparc-ss10/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user # qemu_sparc_ss10_defconfig
+  qemu-system-sparc -M SS-10 -kernel output/images/zImage -drive file=output/images/rootfs.ext2,format=raw -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -net nic,model=lance -net user
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/sparc64-sun4u/readme.txt

@@ -1,5 +1,7 @@
 Run the emulation with:
 
-  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user # qemu_sparc64_sun4u_defconfig
+  qemu-system-sparc64 -M sun4u -kernel output/images/vmlinux -append "rootwait root=/dev/sda console=ttyS0,115200" -serial stdio -drive file=output/images/rootfs.ext2,format=raw -net nic,model=e1000 -net user
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qemu/x86/linux.config

@@ -10,7 +10,6 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_WIRELESS is not set
-CONFIG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_VIRTIO_BLK=y

board/qemu/x86/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
-  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -serial stdio -net nic,model=virtio -net user # qemu_x86_defconfig
+  qemu-system-i386 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -serial stdio -net nic,model=virtio -net user
 
 Optionally add -smp N to emulate a SMP system with N CPUs.
 
 The login prompt will appear in the graphical window.
+
+Tested with QEMU 2.12.0

board/qemu/x86_64/linux.config

@@ -10,7 +10,6 @@ CONFIG_PACKET=y
 CONFIG_UNIX=y
 CONFIG_INET=y
 # CONFIG_WIRELESS is not set
-CONFIG_PCI=y
 CONFIG_DEVTMPFS=y
 CONFIG_DEVTMPFS_MOUNT=y
 CONFIG_VIRTIO_BLK=y

board/qemu/x86_64/readme.txt

@@ -1,7 +1,9 @@
 Run the emulation with:
 
-  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -serial stdio -net nic,model=virtio -net user # qemu_x86_64_defconfig
+  qemu-system-x86_64 -M pc -kernel output/images/bzImage -drive file=output/images/rootfs.ext2,if=virtio,format=raw -append "rootwait root=/dev/vda console=tty1 console=ttyS0" -serial stdio -net nic,model=virtio -net user
 
 Optionally add -smp N to emulate a SMP system with N CPUs.
 
 The login prompt will appear in the graphical window.
+
+Tested with QEMU 2.12.0

board/qemu/xtensa-lx60/readme.txt

@@ -1,7 +1,7 @@
 Run the emulation with:
 
- qemu-system-xtensa -M lx60 -cpu dc233c -monitor null -nographic -kernel output/images/Image.elf # qemu_xtensa_lx60_defconfig
-
- qemu-system-xtensa -M lx60 -cpu dc233c -monitor null -nographic -kernel output/images/Image.elf # qemu_xtensa_lx60_nommu_defconfig
+ qemu-system-xtensa -M lx60 -cpu dc233c -monitor null -nographic -kernel output/images/Image.elf
 
 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0

board/qmtech/zynq/patches/linux/0001-DTS-for-QMTech-Zynq-starter-kit.patch

@@ -1,418 +0,0 @@
-From 22d955122ac0f7ac74ab74aadebf6b8edaf0bbbd Mon Sep 17 00:00:00 2001
-From: Julien Olivain <juju@cotds.org>
-Date: Sun, 15 Dec 2019 18:45:40 +0100
-Subject: [PATCH] DTS for QMTech Zynq starter kit
-
-Signed-off-by: Martin Chabot <martin.chabot@gmail.com>
-Signed-off-by: Julien Olivain <juju@cotds.org>
----
- arch/arm/boot/dts/zynq-qmtech.dts | 397 ++++++++++++++++++++++++++++++
- 1 file changed, 397 insertions(+)
- create mode 100644 arch/arm/boot/dts/zynq-qmtech.dts
-
-diff --git a/arch/arm/boot/dts/zynq-qmtech.dts b/arch/arm/boot/dts/zynq-qmtech.dts
-new file mode 100644
-index 000000000000..c6081dc0080e
---- /dev/null
-+++ b/arch/arm/boot/dts/zynq-qmtech.dts
-@@ -0,0 +1,397 @@
-+// SPDX-License-Identifier: GPL-2.0+
-+/*
-+ *  Copyright (C) 2011 - 2015 Xilinx
-+ *  Copyright (C) 2012 National Instruments Corp.
-+ *  Copyright (C) 2019 Martin Chabot <martin.chabot@gmail.com>
-+ */
-+
-+/* Derived from:
-+ * https://github.com/Xilinx/linux-xlnx/blob/xilinx-v2019.2.01/arch/arm/boot/dts/zynq-zc702.dts
-+ */
-+
-+/dts-v1/;
-+#include "zynq-7000.dtsi"
-+
-+/ {
-+	model = "QMTECH XC7Z010 Starter Kit";
-+	compatible = "xlnx,zynq-qmtech", "xlnx,zynq-zc702", "xlnx,zynq-7000";
-+
-+	aliases {
-+		ethernet0 = &gem0;
-+		i2c0 = &i2c0;
-+		serial0 = &uart1;
-+		spi0 = &qspi;
-+		mmc0 = &sdhci0;
-+	};
-+
-+	memory@0 {
-+		device_type = "memory";
-+		reg = <0x0 0x20000000>;
-+	};
-+
-+	chosen {
-+		bootargs = "";
-+		stdout-path = "serial0:115200n8";
-+	};
-+
-+	leds {
-+		compatible = "gpio-leds";
-+
-+		ds23 {
-+			label = "ds23";
-+			gpios = <&gpio0 10 0>;
-+			linux,default-trigger = "heartbeat";
-+		};
-+	};
-+
-+};
-+
-+&amba {
-+	ocm: sram@fffc0000 {
-+		compatible = "mmio-sram";
-+		reg = <0xfffc0000 0x10000>;
-+	};
-+};
-+
-+&clkc {
-+	ps-clk-frequency = <33333333>;
-+};
-+
-+&gem0 {
-+	status = "okay";
-+	phy-mode = "rgmii-id";
-+	phy-handle = <&ethernet_phy>;
-+
-+	ethernet_phy: ethernet-phy@0 {
-+		reg = <0>;
-+		device_type = "ethernet-phy";
-+	};
-+};
-+
-+&gpio0 {
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_gpio0_default>;
-+};
-+
-+&i2c0 {
-+	status = "disabled";
-+	clock-frequency = <400000>;
-+	pinctrl-names = "default", "gpio";
-+	pinctrl-0 = <&pinctrl_i2c0_default>;
-+	pinctrl-1 = <&pinctrl_i2c0_gpio>;
-+	scl-gpios = <&gpio0 50 0>;
-+	sda-gpios = <&gpio0 51 0>;
-+
-+	i2c-mux@74 {
-+		compatible = "nxp,pca9548";
-+		#address-cells = <1>;
-+		#size-cells = <0>;
-+		reg = <0x74>;
-+
-+		i2c@0 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <0>;
-+			si570: clock-generator@5d {
-+				#clock-cells = <0>;
-+				compatible = "silabs,si570";
-+				temperature-stability = <50>;
-+				reg = <0x5d>;
-+				factory-fout = <156250000>;
-+				clock-frequency = <148500000>;
-+			};
-+		};
-+
-+		i2c@1 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <1>;
-+			adv7511: hdmi-tx@39 {
-+				compatible = "adi,adv7511";
-+				reg = <0x39>;
-+				adi,input-depth = <8>;
-+				adi,input-colorspace = "yuv422";
-+				adi,input-clock = "1x";
-+				adi,input-style = <3>;
-+				adi,input-justification = "right";
-+			};
-+		};
-+
-+		i2c@2 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <2>;
-+			eeprom@54 {
-+				compatible = "atmel,24c08";
-+				reg = <0x54>;
-+			};
-+		};
-+
-+		i2c@3 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <3>;
-+			gpio@21 {
-+				compatible = "ti,tca6416";
-+				reg = <0x21>;
-+				gpio-controller;
-+				#gpio-cells = <2>;
-+			};
-+		};
-+
-+		i2c@4 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <4>;
-+			rtc@51 {
-+				compatible = "nxp,pcf8563";
-+				reg = <0x51>;
-+			};
-+		};
-+
-+		i2c@7 {
-+			#address-cells = <1>;
-+			#size-cells = <0>;
-+			reg = <7>;
-+			hwmon@52 {
-+				compatible = "ti,ucd9248";
-+				reg = <52>;
-+			};
-+			hwmon@53 {
-+				compatible = "ti,ucd9248";
-+				reg = <53>;
-+			};
-+			hwmon@54 {
-+				compatible = "ti,ucd9248";
-+				reg = <54>;
-+			};
-+		};
-+	};
-+};
-+
-+&pinctrl0 {
-+	pinctrl_can0_default: can0-default {
-+		mux {
-+			function = "can0";
-+			groups = "can0_9_grp";
-+		};
-+
-+		conf {
-+			groups = "can0_9_grp";
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+
-+		conf-rx {
-+			pins = "MIO46";
-+			bias-high-impedance;
-+		};
-+
-+		conf-tx {
-+			pins = "MIO47";
-+			bias-disable;
-+		};
-+	};
-+
-+	pinctrl_gem0_default: gem0-default {
-+		mux {
-+			function = "ethernet0";
-+			groups = "ethernet0_0_grp";
-+		};
-+
-+		conf {
-+			groups = "ethernet0_0_grp";
-+			slew-rate = <0>;
-+			io-standard = <4>;
-+		};
-+
-+		conf-rx {
-+			pins = "MIO22", "MIO23", "MIO24", "MIO25", "MIO26", "MIO27";
-+			bias-high-impedance;
-+			low-power-disable;
-+		};
-+
-+		conf-tx {
-+			pins = "MIO16", "MIO17", "MIO18", "MIO19", "MIO20", "MIO21";
-+			bias-disable;
-+			low-power-enable;
-+		};
-+
-+		mux-mdio {
-+			function = "mdio0";
-+			groups = "mdio0_0_grp";
-+		};
-+
-+		conf-mdio {
-+			groups = "mdio0_0_grp";
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+			bias-disable;
-+		};
-+	};
-+
-+	pinctrl_gpio0_default: gpio0-default {
-+		mux {
-+			function = "gpio0";
-+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
-+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
-+				 "gpio0_13_grp", "gpio0_14_grp";
-+		};
-+
-+		conf {
-+			groups = "gpio0_7_grp", "gpio0_8_grp", "gpio0_9_grp",
-+				 "gpio0_10_grp", "gpio0_11_grp", "gpio0_12_grp",
-+				 "gpio0_13_grp", "gpio0_14_grp";
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+
-+		conf-pull-up {
-+			pins = "MIO9", "MIO10", "MIO11", "MIO12", "MIO13", "MIO14";
-+			bias-pull-up;
-+		};
-+
-+		conf-pull-none {
-+			pins = "MIO7", "MIO8";
-+			bias-disable;
-+		};
-+	};
-+
-+	pinctrl_i2c0_default: i2c0-default {
-+		mux {
-+			groups = "i2c0_10_grp";
-+			function = "i2c0";
-+		};
-+
-+		conf {
-+			groups = "i2c0_10_grp";
-+			bias-pull-up;
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+	};
-+
-+	pinctrl_i2c0_gpio: i2c0-gpio {
-+		mux {
-+			groups = "gpio0_50_grp", "gpio0_51_grp";
-+			function = "gpio0";
-+		};
-+
-+		conf {
-+			groups = "gpio0_50_grp", "gpio0_51_grp";
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+	};
-+
-+	pinctrl_sdhci0_default: sdhci0-default {
-+		mux {
-+			groups = "sdio0_2_grp";
-+			function = "sdio0";
-+		};
-+
-+		conf {
-+			groups = "sdio0_2_grp";
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+			bias-disable;
-+		};
-+
-+		mux-cd {
-+			groups = "gpio0_0_grp";
-+			function = "sdio0_cd";
-+		};
-+
-+		conf-cd {
-+			groups = "gpio0_0_grp";
-+			bias-high-impedance;
-+			bias-pull-up;
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+
-+		mux-wp {
-+			groups = "gpio0_15_grp";
-+			function = "sdio0_wp";
-+		};
-+
-+		conf-wp {
-+			groups = "gpio0_15_grp";
-+			bias-high-impedance;
-+			bias-pull-up;
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+	};
-+
-+	pinctrl_uart1_default: uart1-default {
-+		mux {
-+			groups = "uart1_10_grp";
-+			function = "uart1";
-+		};
-+
-+		conf {
-+			groups = "uart1_10_grp";
-+			slew-rate = <0>;
-+			io-standard = <1>;
-+		};
-+
-+		conf-rx {
-+			pins = "MIO25";
-+			bias-high-impedance;
-+		};
-+
-+		conf-tx {
-+			pins = "MIO24";
-+			bias-disable;
-+		};
-+	};
-+};
-+
-+&qspi {
-+	u-boot,dm-pre-reloc;
-+	status = "disabled";
-+	is-dual = <0>;
-+	num-cs = <1>;
-+	flash@0 {
-+		compatible = "n25q128a11";
-+		reg = <0x0>;
-+		spi-tx-bus-width = <1>;
-+		spi-rx-bus-width = <4>;
-+		spi-max-frequency = <50000000>;
-+		#address-cells = <1>;
-+		#size-cells = <1>;
-+		partition@qspi-fsbl-uboot {
-+			label = "qspi-fsbl-uboot";
-+			reg = <0x0 0x100000>;
-+		};
-+		partition@qspi-linux {
-+			label = "qspi-linux";
-+			reg = <0x100000 0x500000>;
-+		};
-+		partition@qspi-device-tree {
-+			label = "qspi-device-tree";
-+			reg = <0x600000 0x20000>;
-+		};
-+		partition@qspi-rootfs {
-+			label = "qspi-rootfs";
-+			reg = <0x620000 0x5E0000>;
-+		};
-+		partition@qspi-bitstream {
-+			label = "qspi-bitstream";
-+			reg = <0xC00000 0x400000>;
-+		};
-+	};
-+};
-+
-+&sdhci0 {
-+	u-boot,dm-pre-reloc;
-+	status = "okay";
-+};
-+
-+&uart1 {
-+	u-boot,dm-pre-reloc;
-+	status = "okay";
-+	pinctrl-names = "default";
-+	pinctrl-0 = <&pinctrl_uart1_default>;
-+};
--- 
-2.23.0
-

board/qmtech/zynq/readme.txt

@@ -1,76 +0,0 @@
-*******************************
-QMTECH Zynq XC7Z010 Starter Kit
-*******************************
-
-This file documents the Buildroot support for the QMTECH [1] Zynq
-XC7Z010 Starter Kit [2]. It is a low cost (~55$) Zynq based
-development board. The board user manual is available at
-[3]. Additional files are available on Github [4].
-
-
-Build
-=====
-
-First, configure Buildroot for the QMTECH Zynq board:
-
-  make zynq_qmtech_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - boot.bin
-  - boot.vfat
-  - devicetree.dtb
-  - rootfs.cpio
-  - rootfs.cpio.gz
-  - rootfs.cpio.uboot
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.bin
-  - u-boot.img
-  - uImage
-  - zynq-qmtech.dtb
-
-
-Create a bootable micro SD card
-===============================
-
-To determine the device associated to the micro SD card have a look in
-the /proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a micro SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-
-Boot the QMTECH Zynq board
-==========================
-
-To boot your newly created system:
-- put a mini USB cable into the J4 Debug USB Port and connect using a
-  terminal emulator at 115200 bps, 8n1,
-- put the prepared micro SD card in the J2 micro SD card slot,
-- plug the 5V power supply on the JP4 barrel jack.
-
-Enjoy!
-
-
-[1]. QMTECH:
-     http://www.chinaqmtech.com/
-
-[2]. QMTECH Zynq XC7Z010 Starter Kit Product Page:
-     http://www.chinaqmtech.com/xilinx_zynq_soc
-
-[3]. QMTECH Zynq XC7Z010 Starter Kit Hardware User Manual:
-     http://www.chinaqmtech.com/filedownload/32552
-
-[4]. QMTECH Github:
-     https://github.com/ChinaQMTECH/ZYNQ_STARTER_KIT