Update for 2015.11.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.defconfig

@@ -15,9 +15,11 @@ BR2_i386=y
 # BR2_nios2 is not set
 # BR2_powerpc is not set
 # BR2_sh is not set
+# BR2_sh64 is not set
 # BR2_sparc is not set
 # BR2_sparc64 is not set
 # BR2_x86_64 is not set
+# BR2_x86_i386 is not set
 # BR2_x86_i486 is not set
 # BR2_x86_i586 is not set
 BR2_x86_i686=y

.flake8

@@ -1,5 +0,0 @@
-[flake8]
-exclude=
-    # copied from the kernel sources
-    utils/diffconfig
-max-line-length=80

.gitlab-ci.yml

@@ -1,23 +0,0 @@
-# Configuration for Gitlab-CI.
-# Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
-
-image: buildroot/base:20200814.2228
-
-stages:
-  - generate-gitlab-ci
-  - build
-
-generate-gitlab-ci-yml:
-  stage: generate-gitlab-ci
-  script: ./support/scripts/generate-gitlab-ci-yml support/misc/gitlab-ci.yml.in > generated-gitlab-ci.yml
-  artifacts:
-    paths:
-      - generated-gitlab-ci.yml
-
-buildroot-pipeline:
-  stage: build
-  trigger:
-    include:
-      - artifact: generated-gitlab-ci.yml
-        job: generate-gitlab-ci-yml
-    strategy: depend

COPYING

@@ -1,19 +1,3 @@
-With the exceptions below, Buildroot is distributed under the terms of
-the GNU General Public License, reproduced below; either version 2 of
-the License, or (at your option) any later version.
-
-Some files in Buildroot contain a different license statement. Those
-files are licensed under the license contained in the file itself.
-
-Buildroot also bundles patch files, which are applied to the sources
-of the various packages. Those patches are not covered by the license
-of Buildroot. Instead, they are covered by the license of the software
-to which the patches are applied. When said software is available
-under multiple licenses, the Buildroot patches are only provided under
-the publicly accessible licenses.
-
------------------------------------------------------------------
-
 		    GNU GENERAL PUBLIC LICENSE
 		       Version 2, June 1991
 

Config.in

@@ -14,55 +14,25 @@ config BR2_HOSTARCH
 	string
 	option env="HOSTARCH"
 
-config BR2_BASE_DIR
+config BR2_EXTERNAL
 	string
-	option env="BASE_DIR"
-
-# br2-external paths definitions
-source "$BR2_BASE_DIR/.br2-external.in.paths"
-
-# Hidden config symbols for packages to check system gcc version
-config BR2_HOST_GCC_VERSION
-	string
-	option env="HOST_GCC_VERSION"
-
-config BR2_HOST_GCC_AT_LEAST_4_9
-	bool
-	default y if BR2_HOST_GCC_VERSION = "4 9"
-
-config BR2_HOST_GCC_AT_LEAST_5
-	bool
-	default y if BR2_HOST_GCC_VERSION = "5"
-	select BR2_HOST_GCC_AT_LEAST_4_9
-
-config BR2_HOST_GCC_AT_LEAST_6
-	bool
-	default y if BR2_HOST_GCC_VERSION = "6"
-	select BR2_HOST_GCC_AT_LEAST_5
-
-config BR2_HOST_GCC_AT_LEAST_7
-	bool
-	default y if BR2_HOST_GCC_VERSION = "7"
-	select BR2_HOST_GCC_AT_LEAST_6
-
-config BR2_HOST_GCC_AT_LEAST_8
-	bool
-	default y if BR2_HOST_GCC_VERSION = "8"
-	select BR2_HOST_GCC_AT_LEAST_7
-
-config BR2_HOST_GCC_AT_LEAST_9
-	bool
-	default y if BR2_HOST_GCC_VERSION = "9"
-	select BR2_HOST_GCC_AT_LEAST_8
-
-# When adding new entries above, be sure to update
-# the HOSTCC_MAX_VERSION variable in the Makefile.
+	option env="BR2_EXTERNAL"
 
 # Hidden boolean selected by packages in need of Java in order to build
-# (example: kodi)
+# (example: xbmc)
 config BR2_NEEDS_HOST_JAVA
 	bool
 
+# Hidden boolean selected by packages in need of javac in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAVAC
+	bool
+
+# Hidden boolean selected by packages in need of jar in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAR
+	bool
+
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
 # toolchains, binary tools like SAM-BA, etc.).
@@ -75,16 +45,6 @@ config BR2_HOSTARCH_NEEDS_IA32_LIBS
 config BR2_HOSTARCH_NEEDS_IA32_COMPILER
 	bool
 
-# Hidden boolean selected by packages that need the host to have an
-# UTF8 locale.
-config BR2_NEEDS_HOST_UTF8_LOCALE
-	bool
-
-# Hidden boolean selected by packages that need the host to have
-# support for building gcc plugins
-config BR2_NEEDS_HOST_GCC_PLUGIN_SUPPORT
-	bool
-
 source "arch/Config.in"
 
 menu "Build options"
@@ -97,7 +57,7 @@ config BR2_WGET
 
 config BR2_SVN
 	string "Subversion (svn) command"
-	default "svn --non-interactive"
+	default "svn"
 
 config BR2_BZR
 	string "Bazaar (bzr) command"
@@ -119,6 +79,10 @@ config BR2_SCP
 	string "Secure copy (scp) command"
 	default "scp"
 
+config BR2_SSH
+	string "Secure shell (ssh) command"
+	default "ssh"
+
 config BR2_HG
 	string "Mercurial (hg) command"
 	default "hg"
@@ -127,9 +91,9 @@ config BR2_ZCAT
 	string "zcat command"
 	default "gzip -d -c"
 	help
-	  Command to be used to extract a gzip'ed file to stdout. zcat
-	  is identical to gunzip -c except that the former may not be
-	  available on your system.
+	  Command to be used to extract a gzip'ed file to stdout.
+	  zcat is identical to gunzip -c except that the former may
+	  not be available on your system.
 	  Default is "gzip -d -c"
 	  Other possible values include "gunzip -c" or "zcat".
 
@@ -150,20 +114,13 @@ config BR2_XZCAT
 	  Command to be used to extract a xz'ed file to stdout.
 	  Default is "xzcat"
 
-config BR2_LZCAT
-	string "lzcat command"
-	default "lzip -d -c"
-	help
-	  Command to be used to extract a lzip'ed file to stdout.
-	  Default is "lzip -d -c"
-
 config BR2_TAR_OPTIONS
 	string "Tar options"
 	default ""
 	help
 	  Options to pass to tar when extracting the sources.
-	  E.g. " -v --exclude='*.svn*'" to exclude all .svn internal
-	  files and to be verbose.
+	  E.g. " -v --exclude='*.svn*'" to exclude all .svn internal files
+	  and to be verbose.
 
 endmenu
 
@@ -176,8 +133,8 @@ config BR2_DEFCONFIG
 	default BR2_DEFCONFIG_FROM_ENV if BR2_DEFCONFIG_FROM_ENV != ""
 	default "$(CONFIG_DIR)/defconfig"
 	help
-	  When running 'make savedefconfig', the defconfig file will be
-	  saved in this location.
+	  When running 'make savedefconfig', the defconfig file will be saved
+	  in this location.
 
 config BR2_DL_DIR
 	string "Download dir"
@@ -185,11 +142,7 @@ config BR2_DL_DIR
 	help
 	  Directory to store all the source files that we need to fetch.
 	  If the Linux shell environment has defined the BR2_DL_DIR
-	  environment variable, then this overrides this configuration
-	  item.
-	  The directory is organized with a subdirectory for each
-	  package. Each package has its own $(LIBFOO_DL_DIR) variable
-	  that can be used to find the correct path.
+	  environment variable, then this overrides this configuration item.
 
 	  The default is $(TOPDIR)/dl
 
@@ -197,9 +150,9 @@ config BR2_HOST_DIR
 	string "Host dir"
 	default "$(BASE_DIR)/host"
 	help
-	  Directory to store all the binary files that are built for the
-	  host. This includes the cross compilation toolchain when
-	  building the internal buildroot toolchain.
+	  Directory to store all the binary files that are built for the host.
+	  This includes the cross compilation toolchain when building the
+	  internal buildroot toolchain.
 
 	  The default is $(BASE_DIR)/host
 
@@ -209,13 +162,11 @@ config BR2_PRIMARY_SITE
 	string "Primary download site"
 	default ""
 	help
-	  Primary site to download from. If this option is set then
-	  buildroot will try to download package source first from this
-	  site and try the default if the file is not found.
-	  Valid URIs are:
-	    - URIs recognized by $(WGET)
-	    - local URIs of the form file://absolutepath
-	    - scp URIs of the form scp://[user@]host:path.
+	  Primary site to download from. If this option is set then buildroot
+	  will try to download package source first from this site and try the
+	  default if the file is not found.
+	  Valid URIs are URIs recognized by $(WGET) and scp URIs of the form
+	  scp://[user@]host:path.
 
 config BR2_PRIMARY_SITE_ONLY
 	bool "Only allow downloads from primary download site"
@@ -224,11 +175,11 @@ config BR2_PRIMARY_SITE_ONLY
 	  If this option is enabled, downloads will only be attempted
 	  from the primary download site. Other locations, like the
 	  package's official download location or the backup download
-	  site, will not be considered. Therefore, if the package is not
-	  present on the primary site, the download fails.
+	  site, will not be considered. Therefore, if the package is
+	  not present on the primary site, the download fails.
 
-	  This is useful for project developers who want to ensure that
-	  the project can be built even if the upstream tarball
+	  This is useful for project developers who want to ensure
+	  that the project can be built even if the upstream tarball
 	  locations disappear.
 
 if !BR2_PRIMARY_SITE_ONLY
@@ -237,36 +188,32 @@ config BR2_BACKUP_SITE
 	string "Backup download site"
 	default "http://sources.buildroot.net"
 	help
-	  Backup site to download from. If this option is set then
-	  buildroot will fall back to download package sources from here
-	  if the normal location fails.
+	  Backup site to download from. If this option is set then buildroot
+	  will fall back to download package sources from here if the
+	  normal location fails.
 
 config BR2_KERNEL_MIRROR
 	string "Kernel.org mirror"
-	default "https://cdn.kernel.org/pub"
+	default "https://www.kernel.org/pub"
 	help
-	  kernel.org is mirrored on a number of servers around the
-	  world. The following allows you to select your preferred
-	  mirror. By default, a CDN is used, which automatically
-	  redirects to a mirror geographically close to you.
+	  kernel.org is mirrored on a number of servers around the world.
+	  The following allows you to select your preferred mirror.
 
-	  Have a look on the kernel.org site for a list of mirrors, then
-	  enter the URL to the base directory. Examples:
+	  Have a look on the kernel.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
 
 	     http://www.XX.kernel.org/pub (XX = country code)
 	     http://mirror.aarnet.edu.au/pub/ftp.kernel.org
 
 config BR2_GNU_MIRROR
 	string "GNU Software mirror"
-	default "http://ftpmirror.gnu.org"
+	default "http://ftp.gnu.org/pub/gnu"
 	help
-	  GNU has multiple software mirrors scattered around the
-	  world. The following allows you to select your preferred
-	  mirror. By default, a generic address is used, which
-	  automatically selects an up-to-date and local mirror.
+	  GNU has multiple software mirrors scattered around the world.
+	  The following allows you to select your preferred mirror.
 
-	  Have a look on the gnu.org site for a list of mirrors, then
-	  enter the URL to the base directory. Examples:
+	  Have a look on the gnu.org site for a list of mirrors, then enter
+	  the URL to the base directory.  Examples:
 
 	     http://ftp.gnu.org/pub/gnu
 	     http://mirror.aarnet.edu.au/pub/gnu
@@ -283,8 +230,8 @@ config BR2_CPAN_MIRROR
 	string "CPAN mirror (Perl packages)"
 	default "http://cpan.metacpan.org"
 	help
-	  CPAN (Comprehensive Perl Archive Network) is a repository of
-	  Perl packages. It has multiple software mirrors scattered
+	  CPAN (Comprehensive Perl Archive Network) is a repository
+	  of Perl packages. It has multiple software mirrors scattered
 	  around the world. This option allows you to select a mirror.
 
 	  The list of mirrors is available at:
@@ -298,22 +245,24 @@ config BR2_JLEVEL
 	int "Number of jobs to run simultaneously (0 for auto)"
 	default "0"
 	help
-	  Number of jobs to run simultaneously. If 0, determine
-	  automatically according to number of CPUs on the host system.
+	  Number of jobs to run simultaneously.  If 0, determine
+	  automatically according to number of CPUs on the host
+	  system.
 
 config BR2_CCACHE
 	bool "Enable compiler cache"
 	help
-	  This option will enable the use of ccache, a compiler cache.
-	  It will cache the result of previous builds to speed up future
-	  builds. By default, the cache is stored in
+	  This option will enable the use of ccache, a compiler
+	  cache. It will cache the result of previous builds to speed
+	  up future builds. By default, the cache is stored in
 	  $HOME/.buildroot-ccache.
 
 	  Note that Buildroot does not try to invalidate the cache
-	  contents when the compiler changes in an incompatible way.
-	  Therefore, if you make a change to the compiler version and/or
-	  configuration, you are responsible for purging the ccache
-	  cache by removing the $HOME/.buildroot-ccache directory.
+	  contents when the compiler changes in an incompatible
+	  way. Therefore, if you make a change to the compiler version
+	  and/or configuration, you are responsible for purging the
+	  ccache cache by removing the $HOME/.buildroot-ccache
+	  directory.
 
 if BR2_CCACHE
 
@@ -322,26 +271,20 @@ config BR2_CCACHE_DIR
 	default "$(HOME)/.buildroot-ccache"
 	help
 	  Where ccache should store cached files.
-	  If the Linux shell environment has defined the BR2_CCACHE_DIR
-	  environment variable, then this overrides this configuration
-	  item.
 
 config BR2_CCACHE_INITIAL_SETUP
 	string "Compiler cache initial setup"
 	help
-	  Initial ccache settings to apply, such as --max-files or
-	  --max-size.
+	  Initial ccache settings to apply, such as --max-files or --max-size.
 
-	  For example, if your project is known to require more space
-	  than the default max cache size, then you might want to
-	  increase the cache size to a suitable amount using the -M
-	  (--max-size) option.
+	  For example, if your project is known to require more space than the
+	  default max cache size, then you might want to increase the cache size
+	  to a suitable amount using the -M (--max-size) option.
 
-	  The string you specify here is passed verbatim to ccache.
-	  Refer to ccache documentation for more details.
+	  The string you specify here is passed verbatim to ccache.  Refer to
+	  ccache documentation for more details.
 
-	  These initial settings are applied after ccache has been
-	  compiled.
+	  These initial settings are applied after ccache has been compiled.
 
 config BR2_CCACHE_USE_BASEDIR
 	bool "Use relative paths"
@@ -350,25 +293,47 @@ config BR2_CCACHE_USE_BASEDIR
 	  Allow ccache to convert absolute paths within the output
 	  directory into relative paths.
 
-	  During the build, many -I include directives are given with an
-	  absolute path. These absolute paths end up in the hashes that
-	  are computed by ccache. Therefore, when you build from a
-	  different directory, the hash will be different and the cached
-	  object will not be used.
+	  During the build, many -I include directives are given with
+	  an absolute path. These absolute paths end up in the hashes
+	  that are computed by ccache. Therefore, when you build from a
+	  different directory, the hash will be different and the
+	  cached object will not be used.
 
 	  To improve cache performance, set this option to y. This
 	  allows ccache to rewrite absolute paths within the output
-	  directory into relative paths. Note that only paths within the
-	  output directory will be rewritten; therefore, if you change
-	  BR2_HOST_DIR to point outside the output directory and
+	  directory into relative paths. Note that only paths within
+	  the output directory will be rewritten; therefore, if you
+	  change BR2_HOST_DIR to point outside the output directory and
 	  subsequently move it to a different location, this will lead
 	  to cache misses.
 
 	  This option has as a result that the debug information in the
 	  object files also has only relative paths. Therefore, make
 	  sure you cd to the build directory before starting gdb. See
-	  the section "COMPILING IN DIFFERENT DIRECTORIES" in the ccache
-	  manual for more information.
+	  the section "COMPILING IN DIFFERENT DIRECTORIES" in the
+	  ccache manual for more information.
+
+endif
+
+config BR2_DEPRECATED
+	bool "Show options and packages that are deprecated or obsolete"
+	help
+	  This option shows outdated/obsolete versions of packages and
+	  options that are otherwise hidden.
+
+if BR2_DEPRECATED
+
+config BR2_DEPRECATED_SINCE_2015_02
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_05
+	bool
+	default y
+
+config BR2_DEPRECATED_SINCE_2015_08
+	bool
+	default y
 
 endif
 
@@ -392,11 +357,11 @@ choice
 config BR2_DEBUG_1
 	bool "debug level 1"
 	help
-	  Debug level 1 produces minimal information, enough for making
-	  backtraces in parts of the program that you don't plan to
-	  debug. This includes descriptions of functions and external
-	  variables, but no information about local variables and no
-	  line numbers.
+	  Debug level 1 produces minimal information, enough
+	  for making backtraces in parts of the program that
+	  you don't plan to debug. This includes descriptions
+	  of functions and external variables, but no information
+	  about local variables and no line numbers.
 
 config BR2_DEBUG_2
 	bool "debug level 2"
@@ -406,41 +371,51 @@ config BR2_DEBUG_2
 config BR2_DEBUG_3
 	bool "debug level 3"
 	help
-	  Level 3 includes extra information, such as all the macro
-	  definitions present in the program. Some debuggers support
-	  macro expansion when you use -g3.
+	  Level 3 includes extra information, such as all the
+	  macro definitions present in the program. Some debuggers
+	  support macro expansion when you use -g3.
 endchoice
 endif
 
+choice
+	prompt "strip command for binaries on target"
+	default BR2_STRIP_strip
+
 config BR2_STRIP_strip
-	bool "strip target binaries"
-	default y
+	bool "strip"
 	depends on !BR2_PACKAGE_HOST_ELF2FLT
 	help
 	  Binaries and libraries in the target filesystem will be
-	  stripped using the normal 'strip' command. This allows to save
-	  space, mainly by removing debugging symbols. Debugging symbols
-	  on the target are needed for native debugging, but not when
-	  remote debugging is used.
+	  stripped using the normal 'strip' command. This allows to
+	  save space, mainly by removing debugging symbols. Debugging
+	  symbols on the target are needed for native debugging, but
+	  not when remote debugging is used.
+
+config BR2_STRIP_none
+	bool "none"
+	help
+	  Do not strip binaries and libraries in the target
+	  filesystem.
+endchoice
 
 config BR2_STRIP_EXCLUDE_FILES
 	string "executables that should not be stripped"
+	depends on !BR2_STRIP_none
 	default ""
-	depends on BR2_STRIP_strip
 	help
-	  You may specify a space-separated list of binaries and
-	  libraries here that should not be stripped on the target.
+	  You may specify a space-separated list of binaries and libraries
+	  here that should not be stripped on the target.
 
 config BR2_STRIP_EXCLUDE_DIRS
 	string "directories that should be skipped when stripping"
+	depends on !BR2_STRIP_none
 	default ""
-	depends on BR2_STRIP_strip
 	help
-	  You may specify a space-separated list of directories that
-	  should be skipped when stripping. Binaries and libraries in
-	  these directories will not be touched. The directories should
-	  be specified relative to the target directory, without leading
-	  slash.
+	  You may specify a space-separated list of directories that should
+	  be skipped when stripping. Binaries and libraries in these
+	  directories will not be touched.
+	  The directories should be specified relative to the target directory,
+	  without leading slash.
 
 choice
 	prompt "gcc optimization level"
@@ -451,107 +426,77 @@ choice
 config BR2_OPTIMIZE_0
 	bool "optimization level 0"
 	help
-	  Do not optimize.
+	  Do not optimize. This is the default.
 
 config BR2_OPTIMIZE_1
 	bool "optimization level 1"
 	help
-	  Optimize. Optimizing compilation takes somewhat more time, and
-	  a lot more memory for a large function. With -O, the compiler
-	  tries to reduce code size and execution time, without
-	  performing any optimizations that take a great deal of
-	  compilation time. -O turns on the following optimization
+	  Optimize. Optimizing compilation takes somewhat more time,
+	  and a lot more memory for a large function. With -O, the
+	  compiler tries to reduce code size and execution time,
+	  without performing any optimizations that take a great deal
+	  of compilation time. -O turns on the following optimization
 	  flags: -fdefer-pop -fdelayed-branch -fguess-branch-probability
 	  -fcprop-registers -floop-optimize -fif-conversion
 	  -fif-conversion2 -ftree-ccp -ftree-dce -ftree-dominator-opts
 	  -ftree-dse -ftree-ter -ftree-lrs -ftree-sra -ftree-copyrename
-	  -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants. -O
-	  also turns on -fomit-frame-pointer on machines where doing so
-	  does not interfere with debugging.
+	  -ftree-fre -ftree-ch -funit-at-a-time -fmerge-constants
+	  -O also turns on -fomit-frame-pointer on machines where doing
+	  so does not interfere with debugging.
 
 config BR2_OPTIMIZE_2
 	bool "optimization level 2"
 	help
-	  Optimize even more. GCC performs nearly all supported
-	  optimizations that do not involve a space-speed tradeoff. The
-	  compiler does not perform loop unrolling or function inlining
-	  when you specify -O2. As compared to -O, this option increases
-	  both compilation time and the performance of the generated
-	  code. -O2 turns on all optimization flags specified by -O. It
-	  also turns on the following optimization flags:
-	  -fthread-jumps -fcrossjumping -foptimize-sibling-calls
+	  Optimize even more. GCC performs nearly all supported optimizations
+	  that do not involve a space-speed tradeoff. The compiler does not
+	  perform loop unrolling or function inlining when you specify -O2.
+	  As compared to -O, this option increases both compilation time and
+	  the performance of the generated code. -O2 turns on all optimization
+	  flags specified by -O. It also turns on the following optimization
+	  flags: -fthread-jumps -fcrossjumping -foptimize-sibling-calls
 	  -fcse-follow-jumps -fcse-skip-blocks -fgcse  -fgcse-lm
-	  -fexpensive-optimizations -fstrength-reduce
-	  -frerun-cse-after-loop -frerun-loop-opt -fcaller-saves
-	  -fpeephole2 -fschedule-insns -fschedule-insns2
-	  -fsched-interblock -fsched-spec -fregmove -fstrict-aliasing
-	  -fdelete-null-pointer-checks -freorder-blocks
-	  -freorder-functions -falign-functions -falign-jumps
-	  -falign-loops -falign-labels -ftree-vrp -ftree-pre. Please
-	  note the warning under -fgcse about invoking -O2 on programs
+	  -fexpensive-optimizations -fstrength-reduce -frerun-cse-after-loop
+	  -frerun-loop-opt -fcaller-saves -fpeephole2 -fschedule-insns
+	  -fschedule-insns2 -fsched-interblock -fsched-spec -fregmove
+	  -fstrict-aliasing -fdelete-null-pointer-checks -freorder-blocks
+	  -freorder-functions -falign-functions -falign-jumps -falign-loops
+	  -falign-labels -ftree-vrp -ftree-pre
+	  Please note the warning under -fgcse about invoking -O2 on programs
 	  that use computed gotos.
 
 config BR2_OPTIMIZE_3
 	bool "optimization level 3"
 	help
-	  Optimize yet more. -O3 turns on all optimizations specified by
-	  -O2 and also turns on the -finline-functions, -funswitch-loops
-	  and -fgcse-after-reload options.
-
-config BR2_OPTIMIZE_G
-	bool "optimize for debugging"
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8
-	help
-	  Optimize for debugging. This enables optimizations that do not
-	  interfere with debugging. It should be the optimization level
-	  of choice for the standard edit-compile-debug cycle, offering
-	  a reasonable level of optimization while maintaining fast
-	  compilation and a good debugging experience.
+	  Optimize yet more. -O3 turns on all optimizations specified by -O2
+	  and also turns on the -finline-functions, -funswitch-loops and
+	  -fgcse-after-reload options.
 
 config BR2_OPTIMIZE_S
 	bool "optimize for size"
 	help
-	  Optimize for size. -Os enables all -O2 optimizations that do
-	  not typically increase code size. It also performs further
-	  optimizations designed to reduce code size. -Os disables the
-	  following optimization flags: -falign-functions -falign-jumps
-	  -falign-loops -falign-labels -freorder-blocks
-	  -freorder-blocks-and-partition -fprefetch-loop-arrays
+	  Optimize for size. -Os enables all -O2 optimizations that do not
+	  typically increase code size. It also performs further optimizations
+	  designed to reduce code size. -Os disables the following optimization
+	  flags: -falign-functions -falign-jumps -falign-loops -falign-labels
+	  -freorder-blocks -freorder-blocks-and-partition -fprefetch-loop-arrays
 	  -ftree-vect-loop-version
-	  This is the default.
-
-config BR2_OPTIMIZE_FAST
-	bool "optimize for fast (may break packages!)"
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_6
-	help
-	  Optimize for fast. Disregard strict standards
-	  compliance. -Ofast enables all -O3 optimizations. It also
-	  enables optimizations that are not valid for all
-	  standard-compliant programs, so be careful, as it may break
-	  some packages. It turns on -ffast-math and the
-	  Fortran-specific -fstack-arrays, unless -fmax-stack-var-size
-	  is specified, and -fno-protect-parens.
 
 endchoice
 
 config BR2_GOOGLE_BREAKPAD_ENABLE
 	bool "Enable google-breakpad support"
-	depends on BR2_INSTALL_LIBSTDCPP
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
-	depends on BR2_USE_WCHAR
-	depends on BR2_TOOLCHAIN_HAS_THREADS
-	depends on (BR2_TOOLCHAIN_USES_GLIBC || BR2_TOOLCHAIN_USES_UCLIBC)
-	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
-	depends on BR2_PACKAGE_HOST_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	select BR2_PACKAGE_GOOGLE_BREAKPAD
+	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_TOOLCHAIN_USES_GLIBC
+	depends on BR2_PACKAGE_GOOGLE_BREAKPAD_ARCH_SUPPORTS
 	help
-	  This option will enable the use of google breakpad, a library
-	  and tool suite that allows you to distribute an application to
-	  users with compiler-provided debugging information removed,
-	  record crashes in compact "minidump" files, send them back to
-	  your server and produce C and C++ stack traces from these
-	  minidumps. Breakpad can also write minidumps on request for
-	  programs that have not crashed.
+	  This option will enable the use of google breakpad, a
+	  library and tool suite that allows you to distribute an
+	  application to users with compiler-provided debugging
+	  information removed, record crashes in compact "minidump"
+	  files, send them back to your server and produce C and C++
+	  stack traces from these minidumps.  Breakpad can also write
+	  minidumps on request for programs that have not crashed.
 
 if BR2_GOOGLE_BREAKPAD_ENABLE
 
@@ -571,6 +516,23 @@ config BR2_GOOGLE_BREAKPAD_INCLUDE_FILES
 
 endif
 
+config BR2_ENABLE_SSP
+	bool "build code with Stack Smashing Protection"
+	depends on BR2_TOOLCHAIN_HAS_SSP
+	help
+	  Enable stack smashing protection support using GCCs
+	  -fstack-protector-all option.
+
+	  See http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
+	  for details.
+
+	  Note that this requires the toolchain to have SSP
+	  support. This is always the case for glibc and eglibc
+	  toolchain, but is optional in uClibc toolchains.
+
+comment "enabling Stack Smashing Protection requires support in the toolchain"
+	depends on !BR2_TOOLCHAIN_HAS_SSP
+
 choice
 	bool "libraries"
 	default BR2_SHARED_LIBS if BR2_BINFMT_SUPPORTS_SHARED
@@ -578,19 +540,20 @@ choice
 	help
 	  Select the type of libraries you want to use on the target.
 
-	  The default is to build dynamic libraries and use those on the
-	  target filesystem, except when the architecture and/or the
-	  selected binary format does not support shared libraries.
+	  The default is to build dynamic libraries and use those on
+	  the target filesystem, except when the architecture and/or
+	  the selected binary format does not support shared
+	  libraries.
 
 config BR2_STATIC_LIBS
 	bool "static only"
 	help
-	  Build and use only static libraries. No shared libraries will
-	  be installed on the target. This potentially increases your
-	  code size and should only be used if you know what you are
-	  doing. Note that some packages may not be available when this
-	  option is enabled, due to their need for dynamic library
-	  support.
+	  Build and use only static libraries. No shared libraries
+	  will be instaled on the target. This potentially increases
+	  your code size and should only be used if you know what you
+	  are doing. Note that some packages may not be available when
+	  this option is enabled, due to their need for dynamic
+	  library support.
 
 config BR2_SHARED_LIBS
 	bool "shared only"
@@ -610,262 +573,56 @@ config BR2_SHARED_STATIC_LIBS
 
 endchoice
 
+
 config BR2_PACKAGE_OVERRIDE_FILE
 	string "location of a package override file"
 	default "$(CONFIG_DIR)/local.mk"
 	help
 	  A package override file is a short makefile that contains
-	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR, which
-	  allows to tell Buildroot to use an existing directory as the
-	  source directory for a particular package. See the Buildroot
-	  documentation for more details on this feature.
+	  variable definitions of the form <pkg>_OVERRIDE_SRCDIR,
+	  which allows to tell Buildroot to use an existing directory
+	  as the source directory for a particular package. See the
+	  Buildroot documentation for more details on this feature.
 
 config BR2_GLOBAL_PATCH_DIR
 	string "global patch directories"
 	help
-	  You may specify a space separated list of one or more
-	  directories containing global package patches. For a specific
-	  version <packageversion> of a specific package <packagename>,
-	  patches are applied as follows:
+	  You may specify a space separated list of one or more directories
+	  containing global package patches. For a specific version
+	  <packageversion> of a specific package <packagename>, patches are
+	  applied as follows:
 
-	  First, the default Buildroot patch set for the package is
-	  applied from the package's directory in Buildroot.
+	  First, the default Buildroot patch set for the package is applied
+	  from the package's directory in Buildroot.
 
 	  Then for every directory - <global-patch-dir> - that exists in
 	  BR2_GLOBAL_PATCH_DIR, if the directory
-	  <global-patch-dir>/<packagename>/<packageversion>/ exists,
-	  then all *.patch files in this directory will be applied.
+	  <global-patch-dir>/<packagename>/<packageversion>/ exists, then all
+	  *.patch files in this directory will be applied.
 
-	  Otherwise, if the directory <global-patch-dir>/<packagename>
-	  exists, then all *.patch files in the directory will be
-	  applied.
+	  Otherwise, if the directory <global-patch-dir>/<packagename> exists,
+	  then all *.patch files in the directory will be applied.
 
 menu "Advanced"
 
 config BR2_COMPILER_PARANOID_UNSAFE_PATH
 	bool "paranoid check of library/header paths"
-	default y
 	help
 	  By default, when this option is disabled, when the Buildroot
-	  cross-compiler will encounter an unsafe library or header path
-	  (such as /usr/include, or /usr/lib), the compiler will display
-	  a warning.
+	  cross-compiler will encounter an unsafe library or header
+	  path (such as /usr/include, or /usr/lib), the compiler will
+	  display a warning.
 
-	  By enabling this option, this warning is turned into an error,
-	  which will completely abort the build when such unsafe paths
-	  are encountered.
+	  By enabling this option, this warning is turned into an
+	  error, which will completely abort the build when such
+	  unsafe paths are encountered.
 
 	  Note that this mechanism is available for both the internal
-	  toolchain (through the toolchain wrapper and binutils patches)
-	  and external toolchain backends (through the toolchain
-	  wrapper).
-
-config BR2_FORCE_HOST_BUILD
-	bool "Force the building of host dependencies"
-	help
-	  Build all available host dependencies, even if they are
-	  already installed on the system.
-
-	  This option can be used to ensure that the download cache of
-	  source archives for packages remain consistent between
-	  different build hosts.
-
-	  This option will increase build time.
-
-config BR2_REPRODUCIBLE
-	bool "Make the build reproducible (experimental)"
-	# SOURCE_DATE_EPOCH support in toolchain-wrapper requires GCC 4.4
-	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_4
-	help
-	  This option will remove all sources of non-reproducibility
-	  from the build process. For a given Buildroot configuration,
-	  this allows to generate exactly identical binaries from one
-	  build to the other, including on different machines.
-
-	  The current implementation is restricted to builds with the
-	  same output directory. Many (absolute) paths are recorded in
-	  intermediary files, and it is very likely that some of these
-	  paths leak into the target rootfs. If you build with the
-	  same O=... path, however, the result is identical.
-
-	  This is labeled as an experimental feature, as not all
-	  packages behave properly to ensure reproducibility.
-
-config BR2_PER_PACKAGE_DIRECTORIES
-	bool "Use per-package directories (experimental)"
-	help
-	  This option will change the build process of Buildroot
-	  package to use per-package target and host directories.
-
-	  This is useful for two related purposes:
-
-	    - Cleanly isolate the build of each package, so that a
-	      given package only "sees" the dependencies it has
-	      explicitly expressed, and not other packages that may
-	      have by chance been built before.
-
-	    - Enable top-level parallel build.
-
-	  This is labeled as an experimental feature, as not all
-	  packages behave properly with per-package directories.
+	  toolchain (through gcc and binutils patches) and external
+	  toolchain backends (through the external toolchain wrapper).
 
 endmenu
 
-comment "Security Hardening Options"
-
-config BR2_PIC_PIE
-	bool "Build code with PIC/PIE"
-	depends on BR2_SHARED_LIBS
-	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
-	help
-	  Generate Position-Independent Code (PIC) and link
-	  Position-Independent Executables (PIE).
-
-comment "PIC/PIE needs a toolchain w/ PIE"
-	depends on BR2_SHARED_LIBS
-	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
-
-choice
-	bool "Stack Smashing Protection"
-	default BR2_SSP_ALL if BR2_ENABLE_SSP # legacy
-	depends on BR2_TOOLCHAIN_HAS_SSP
-	help
-	  Enable stack smashing protection support using GCC's
-	  -fstack-protector option family.
-
-	  See
-	  http://www.linuxfromscratch.org/hints/downloads/files/ssp.txt
-	  for details.
-
-	  Note that this requires the toolchain to have SSP support.
-	  This is always the case for glibc and eglibc toolchain, but is
-	  optional in uClibc toolchains.
-
-config BR2_SSP_NONE
-	bool "None"
-	help
-	  Disable stack-smashing protection.
-
-config BR2_SSP_REGULAR
-	bool "-fstack-protector"
-	help
-	  Emit extra code to check for buffer overflows, such as stack
-	  smashing attacks. This is done by adding a guard variable to
-	  functions with vulnerable objects. This includes functions
-	  that call alloca, and functions with buffers larger than 8
-	  bytes. The guards are initialized when a function is entered
-	  and then checked when the function exits. If a guard check
-	  fails, an error message is printed and the program exits.
-
-config BR2_SSP_STRONG
-	bool "-fstack-protector-strong"
-	depends on BR2_TOOLCHAIN_HAS_SSP_STRONG
-	help
-	  Like -fstack-protector but includes additional functions to be
-	  protected - those that have local array definitions, or have
-	  references to local frame addresses.
-
-	  -fstack-protector-strong officially appeared in gcc 4.9, but
-	  some vendors have backported -fstack-protector-strong to older
-	  versions of gcc.
-
-config BR2_SSP_ALL
-	bool "-fstack-protector-all"
-	help
-	  Like -fstack-protector except that all functions are
-	  protected. This option might have a significant performance
-	  impact on the compiled binaries.
-
-endchoice
-
-config BR2_SSP_OPTION
-	string
-	default "-fstack-protector"        if BR2_SSP_REGULAR
-	default "-fstack-protector-strong" if BR2_SSP_STRONG
-	default "-fstack-protector-all"    if BR2_SSP_ALL
-
-comment "Stack Smashing Protection needs a toolchain w/ SSP"
-	depends on !BR2_TOOLCHAIN_HAS_SSP
-
-choice
-	bool "RELRO Protection"
-	depends on BR2_SHARED_LIBS
-	help
-	  Enable a link-time protection know as RELRO (RELocation Read
-	  Only) which helps to protect from certain type of exploitation
-	  techniques altering the content of some ELF sections.
-
-config BR2_RELRO_NONE
-	bool "None"
-	help
-	  Disables Relocation link-time protections.
-
-config BR2_RELRO_PARTIAL
-	bool "Partial"
-	help
-	  This option makes the dynamic section not writeable after
-	  initialization (with almost no performance penalty).
-
-config BR2_RELRO_FULL
-	bool "Full"
-	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
-	select BR2_PIC_PIE
-	help
-	  This option includes the partial configuration, but also marks
-	  the GOT as read-only at the cost of initialization time during
-	  program loading, i.e every time an executable is started.
-
-comment "RELRO Full needs a toolchain w/ PIE"
-	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
-
-endchoice
-
-comment "RELocation Read Only (RELRO) needs shared libraries"
-	depends on !BR2_SHARED_LIBS
-
-choice
-	bool "Buffer-overflow Detection (FORTIFY_SOURCE)"
-	depends on BR2_TOOLCHAIN_USES_GLIBC
-	depends on !BR2_OPTIMIZE_0
-	help
-	  Enable the _FORTIFY_SOURCE macro which introduces additional
-	  checks to detect buffer-overflows in the following standard
-	  library functions: memcpy, mempcpy, memmove, memset, strcpy,
-	  stpcpy, strncpy, strcat, strncat, sprintf, vsprintf, snprintf,
-	  vsnprintf, gets.
-
-	  NOTE: This feature requires an optimization level of s/1/2/3/g
-
-	  Support for this feature has been present since GCC 4.x.
-
-config BR2_FORTIFY_SOURCE_NONE
-	bool "None"
-	help
-	  Disables additional checks to detect buffer-overflows.
-
-config BR2_FORTIFY_SOURCE_1
-	bool "Conservative"
-	# gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
-	depends on !BR2_TOOLCHAIN_BUILDROOT || BR2_TOOLCHAIN_GCC_AT_LEAST_6
-	help
-	  This option sets _FORTIFY_SOURCE to 1 and only introduces
-	  checks that shouldn't change the behavior of conforming
-	  programs.  Adds checks at compile-time only.
-
-config BR2_FORTIFY_SOURCE_2
-	bool "Aggressive"
-	# gcc bug https://gcc.gnu.org/bugzilla/show_bug.cgi?id=61164
-	depends on !BR2_TOOLCHAIN_BUILDROOT || BR2_TOOLCHAIN_GCC_AT_LEAST_6
-	help
-	  This option sets _FORTIFY_SOURCES to 2 and some more
-	  checking is added, but some conforming programs might fail.
-	  Also adds checks at run-time (detected buffer overflow
-	  terminates the program)
-
-endchoice
-
-comment "Fortify Source needs a glibc toolchain and optimization"
-	depends on (!BR2_TOOLCHAIN_USES_GLIBC || BR2_OPTIMIZE_0)
 endmenu
 
 source "toolchain/Config.in"
@@ -884,5 +641,9 @@ source "package/Config.in.host"
 
 source "Config.in.legacy"
 
-# br2-external menus definitions
-source "$BR2_BASE_DIR/.br2-external.in.menus"
+menu "User-provided options"
+	depends on BR2_EXTERNAL != "support/dummy-external"
+
+source "$BR2_EXTERNAL/Config.in"
+
+endmenu

Makefile.legacy

@@ -4,6 +4,9 @@
 # This file contains placeholders to detect backward-compatibility problems.
 # When a buildroot "API" feature is being deprecated, a rule should be added
 # here that issues an error when the old feature is used.
+#
+# This file is not included if BR2_DEPRECATED is selected, so it is possible
+# to bypass the errors (although that's usually a bad idea).
 
 ifeq ($(BR2_LEGACY),y)
 $(error "You have legacy configuration in your .config! Please check your configuration.")

README

@@ -21,6 +21,3 @@ Buildroot comes with a basic configuration for a number of boards. Run
 Please feed suggestions, bug reports, insults, and bribes back to the
 buildroot mailing list: buildroot@buildroot.org
 You can also find us on #buildroot on Freenode IRC.
-
-If you would like to contribute patches, please read
-https://buildroot.org/manual.html#submitting-patches

arch/Config.in

@@ -15,6 +15,9 @@ config BR2_ARCH_HAS_MMU_MANDATORY
 config BR2_ARCH_HAS_MMU_OPTIONAL
 	bool
 
+config BR2_ARCH_HAS_FDPIC_SUPPORT
+	bool
+
 choice
 	prompt "Target Architecture"
 	default BR2_i386
@@ -25,25 +28,24 @@ config BR2_arcle
 	bool "ARC (little endian)"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  Synopsys' DesignWare ARC Processor Cores are a family of
-	  32-bit CPUs that can be used from deeply embedded to high
-	  performance host applications. Little endian.
+	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
+	  that can be used from deeply embedded to high performance host
+	  applications. Little endian.
 
 config BR2_arceb
 	bool "ARC (big endian)"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  Synopsys' DesignWare ARC Processor Cores are a family of
-	  32-bit CPUs that can be used from deeply embedded to high
-	  performance host applications. Big endian.
+	  Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs
+	  that can be used from deeply embedded to high performance host
+	  applications. Big endian.
 
 config BR2_arm
 	bool "ARM (little endian)"
 	# MMU support is set by the subarchitecture file, arch/Config.in.arm
 	help
-	  ARM is a 32-bit reduced instruction set computer (RISC)
-	  instruction set architecture (ISA) developed by ARM Holdings.
-	  Little endian.
+	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
+	  set architecture (ISA) developed by ARM Holdings. Little endian.
 	  http://www.arm.com/
 	  http://en.wikipedia.org/wiki/ARM
 
@@ -51,9 +53,8 @@ config BR2_armeb
 	bool "ARM (big endian)"
 	# MMU support is set by the subarchitecture file, arch/Config.in.arm
 	help
-	  ARM is a 32-bit reduced instruction set computer (RISC)
-	  instruction set architecture (ISA) developed by ARM Holdings.
-	  Big endian.
+	  ARM is a 32-bit reduced instruction set computer (RISC) instruction
+	  set architecture (ISA) developed by ARM Holdings. Big endian.
 	  http://www.arm.com/
 	  http://en.wikipedia.org/wiki/ARM
 
@@ -75,16 +76,14 @@ config BR2_aarch64_be
 	  http://www.arm.com/products/processors/instruction-set-architectures/armv8-architecture.php
 	  http://en.wikipedia.org/wiki/ARM
 
-config BR2_csky
-	bool "csky"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	# Most variants are supported by gcc-9+, except one that is
-	# handled as a special exception in package/gcc/Config.in.host
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
+config BR2_bfin
+	bool "Blackfin"
+	select BR2_ARCH_HAS_FDPIC_SUPPORT
 	help
-	  csky is processor IP from china.
-	  http://www.c-sky.com/
-	  http://www.github.com/c-sky
+	  The Blackfin is a family of 16 or 32-bit microprocessors developed,
+	  manufactured and marketed by Analog Devices.
+	  http://www.analog.com/
+	  http://en.wikipedia.org/wiki/Blackfin
 
 config BR2_i386
 	bool "i386"
@@ -95,7 +94,8 @@ config BR2_i386
 
 config BR2_m68k
 	bool "m68k"
-	# MMU support is set by the subarchitecture file, arch/Config.in.m68k
+	select BR2_ARCH_HAS_MMU_MANDATORY
+	depends on BROKEN # ice in uclibc / inet_ntoa_r
 	help
 	  Motorola 68000 family microprocessor
 	  http://en.wikipedia.org/wiki/M68k
@@ -104,8 +104,8 @@ config BR2_microblazeel
 	bool "Microblaze AXI (little endian)"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  Soft processor core designed for Xilinx FPGAs from Xilinx. AXI
-	  bus based architecture (little endian)
+	  Soft processor core designed for Xilinx FPGAs from Xilinx. AXI bus
+	  based architecture (little endian)
 	  http://www.xilinx.com
 	  http://en.wikipedia.org/wiki/Microblaze
 
@@ -113,8 +113,8 @@ config BR2_microblazebe
 	bool "Microblaze non-AXI (big endian)"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  Soft processor core designed for Xilinx FPGAs from Xilinx. PLB
-	  bus based architecture (non-AXI, big endian)
+	  Soft processor core designed for Xilinx FPGAs from Xilinx. PLB bus
+	  based architecture (non-AXI, big endian)
 	  http://www.xilinx.com
 	  http://en.wikipedia.org/wiki/Microblaze
 
@@ -122,8 +122,7 @@ config BR2_mips
 	bool "MIPS (big endian)"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Big
-	  endian.
+	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
@@ -131,8 +130,7 @@ config BR2_mipsel
 	bool "MIPS (little endian)"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Little
-	  endian.
+	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
@@ -141,8 +139,7 @@ config BR2_mips64
 	select BR2_ARCH_IS_64
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Big
-	  endian.
+	  MIPS is a RISC microprocessor from MIPS Technologies. Big endian.
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
@@ -151,19 +148,10 @@ config BR2_mips64el
 	select BR2_ARCH_IS_64
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  MIPS is a RISC microprocessor from MIPS Technologies. Little
-	  endian.
+	  MIPS is a RISC microprocessor from MIPS Technologies. Little endian.
 	  http://www.mips.com/
 	  http://en.wikipedia.org/wiki/MIPS_Technologies
 
-config BR2_nds32
-	bool "nds32"
-	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  nds32 is a 32-bit architecture developed by Andes Technology.
-	  https://en.wikipedia.org/wiki/Andes_Technology
-
 config BR2_nios2
 	bool "Nios II"
 	select BR2_ARCH_HAS_MMU_MANDATORY
@@ -172,19 +160,12 @@ config BR2_nios2
 	  http://www.altera.com/
 	  http://en.wikipedia.org/wiki/Nios_II
 
-config BR2_or1k
-	bool "OpenRISC"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  OpenRISC is a free and open processor for embedded system.
-	  http://openrisc.io
-
 config BR2_powerpc
 	bool "PowerPC"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  PowerPC is a RISC architecture created by Apple-IBM-Motorola
-	  alliance. Big endian.
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  Big endian.
 	  http://www.power.org/
 	  http://en.wikipedia.org/wiki/Powerpc
 
@@ -193,8 +174,8 @@ config BR2_powerpc64
 	select BR2_ARCH_IS_64
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  PowerPC is a RISC architecture created by Apple-IBM-Motorola
-	  alliance. Big endian.
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  Big endian.
 	  http://www.power.org/
 	  http://en.wikipedia.org/wiki/Powerpc
 
@@ -203,38 +184,27 @@ config BR2_powerpc64le
 	select BR2_ARCH_IS_64
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  PowerPC is a RISC architecture created by Apple-IBM-Motorola
-	  alliance. Little endian.
+	  PowerPC is a RISC architecture created by Apple-IBM-Motorola alliance.
+	  Little endian.
 	  http://www.power.org/
 	  http://en.wikipedia.org/wiki/Powerpc
 
-config BR2_riscv
-	bool "RISCV"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-	help
-	  RISC-V is an open, free Instruction Set Architecture created
-	  by the UC Berkeley Architecture Research group and supported
-	  and promoted by RISC-V Foundation.
-	  https://riscv.org/
-	  https://en.wikipedia.org/wiki/RISC-V
-
-config BR2_s390x
-	bool "s390x"
-	select BR2_ARCH_IS_64
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  s390x is a big-endian architecture made by IBM.
-	  http://www.ibm.com/
-	  http://en.wikipedia.org/wiki/IBM_System/390
-
 config BR2_sh
 	bool "SuperH"
 	select BR2_ARCH_HAS_MMU_OPTIONAL
 	help
-	  SuperH (or SH) is a 32-bit reduced instruction set computer
-	  (RISC) instruction set architecture (ISA) developed by
-	  Hitachi.
+	  SuperH (or SH) is a 32-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
+	  http://www.hitachi.com/
+	  http://en.wikipedia.org/wiki/SuperH
+
+config BR2_sh64
+	bool "SuperH64"
+	depends on BR2_DEPRECATED_SINCE_2015_05
+	select BR2_ARCH_HAS_MMU_MANDATORY
+	help
+	  SuperH64 (or SH) is a 64-bit reduced instruction set computer (RISC)
+	  instruction set architecture (ISA) developed by Hitachi.
 	  http://www.hitachi.com/
 	  http://en.wikipedia.org/wiki/SuperH
 
@@ -242,9 +212,8 @@ config BR2_sparc
 	bool "SPARC"
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  SPARC (from Scalable Processor Architecture) is a RISC
-	  instruction set architecture (ISA) developed by Sun
-	  Microsystems.
+	  SPARC (from Scalable Processor Architecture) is a RISC instruction
+	  set architecture (ISA) developed by Sun Microsystems.
 	  http://www.oracle.com/sun
 	  http://en.wikipedia.org/wiki/Sparc
 
@@ -253,9 +222,8 @@ config BR2_sparc64
 	select BR2_ARCH_IS_64
 	select BR2_ARCH_HAS_MMU_MANDATORY
 	help
-	  SPARC (from Scalable Processor Architecture) is a RISC
-	  instruction set architecture (ISA) developed by Sun
-	  Microsystems.
+	  SPARC (from Scalable Processor Architecture) is a RISC instruction
+	  set architecture (ISA) developed by Sun Microsystems.
 	  http://www.oracle.com/sun
 	  http://en.wikipedia.org/wiki/Sparc
 
@@ -278,49 +246,6 @@ config BR2_xtensa
 
 endchoice
 
-# For some architectures or specific cores, our internal toolchain
-# backend is not suitable (like, missing support in upstream gcc, or
-# no ChipCo fork exists...)
-config BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
-	bool
-
-config BR2_ARCH_HAS_TOOLCHAIN_BUILDROOT
-	bool
-	default y if !BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
-
-# The following symbols are selected by the individual
-# Config.in.$ARCH files
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-	bool
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_8
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-
-config BR2_ARCH_NEEDS_GCC_AT_LEAST_10
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-
 # The following string values are defined by the individual
 # Config.in.$ARCH files
 config BR2_ARCH
@@ -335,15 +260,12 @@ config BR2_GCC_TARGET_ARCH
 config BR2_GCC_TARGET_ABI
 	string
 
-config BR2_GCC_TARGET_NAN
-	string
-
-config BR2_GCC_TARGET_FP32_MODE
-	string
-
 config BR2_GCC_TARGET_CPU
 	string
 
+config BR2_GCC_TARGET_CPU_REVISION
+	string
+
 # The value of this option will be passed as --with-fpu=<value> when
 # building gcc (internal backend) or -mfpu=<value> in the toolchain
 # wrapper (external toolchain)
@@ -362,20 +284,19 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	string
 
+# If the architecture has atomic operations, select this:
+config BR2_ARCH_HAS_ATOMICS
+	bool
+
 # Must be selected by binary formats that support shared libraries.
 config BR2_BINFMT_SUPPORTS_SHARED
 	bool
 
-# Must match the name of the architecture from readelf point of view,
-# i.e the "Machine:" field of readelf output. See get_machine_name()
-# in binutils/readelf.c for the list of possible values.
-config BR2_READELF_ARCH_NAME
-	string
-
 # Set up target binary format
 choice
 	prompt "Target Binary Format"
 	default BR2_BINFMT_ELF if BR2_USE_MMU
+	default BR2_BINFMT_FDPIC if BR2_ARCH_HAS_FDPIC_SUPPORT
 	default BR2_BINFMT_FLAT
 
 config BR2_BINFMT_ELF
@@ -383,34 +304,49 @@ config BR2_BINFMT_ELF
 	depends on BR2_USE_MMU
 	select BR2_BINFMT_SUPPORTS_SHARED
 	help
-	  ELF (Executable and Linkable Format) is a format for libraries
-	  and executables used across different architectures and
-	  operating systems.
+	  ELF (Executable and Linkable Format) is a format for libraries and
+	  executables used across different architectures and operating
+	  systems.
+
+config BR2_BINFMT_FDPIC
+	bool "FDPIC"
+	depends on BR2_ARCH_HAS_FDPIC_SUPPORT
+	select BR2_BINFMT_SUPPORTS_SHARED
+	help
+	  ELF FDPIC binaries are based on ELF, but allow the individual load
+	  segments of a binary to be located in memory independently of each
+	  other. This makes this format ideal for use in environments where no
+	  MMU is available.
 
 config BR2_BINFMT_FLAT
 	bool "FLAT"
 	depends on !BR2_USE_MMU
 	help
-	  FLAT binary is a relatively simple and lightweight executable
-	  format based on the original a.out format. It is widely used
-	  in environment where no MMU is available.
+	  FLAT binary is a relatively simple and lightweight executable format
+	  based on the original a.out format. It is widely used in environment
+	  where no MMU is available.
 
 endchoice
 
 # Set up flat binary type
 choice
 	prompt "FLAT Binary type"
-	default BR2_BINFMT_FLAT_ONE
 	depends on BR2_BINFMT_FLAT
+	default BR2_BINFMT_FLAT_ONE
 
 config BR2_BINFMT_FLAT_ONE
 	bool "One memory region"
 	help
 	  All segments are linked into one memory region.
 
+config BR2_BINFMT_FLAT_SEP_DATA
+	bool "Separate data and code region"
+	help
+	  Allow for the data and text segments to be separated and placed in
+	  different regions of memory.
+
 config BR2_BINFMT_FLAT_SHARED
 	bool "Shared binary"
-	depends on BR2_m68k
 	# Even though this really generates shared binaries, there is no libdl
 	# and dlopen() cannot be used. So packages that require shared
 	# libraries cannot be built. Therefore, we don't select
@@ -426,12 +362,16 @@ if BR2_arcle || BR2_arceb
 source "arch/Config.in.arc"
 endif
 
-if BR2_arm || BR2_armeb || BR2_aarch64 || BR2_aarch64_be
+if BR2_arm || BR2_armeb
 source "arch/Config.in.arm"
 endif
 
-if BR2_csky
-source "arch/Config.in.csky"
+if BR2_aarch64 || BR2_aarch64_be
+source "arch/Config.in.aarch64"
+endif
+
+if BR2_bfin
+source "arch/Config.in.bfin"
 endif
 
 if BR2_m68k
@@ -446,31 +386,15 @@ if BR2_mips || BR2_mips64 || BR2_mipsel || BR2_mips64el
 source "arch/Config.in.mips"
 endif
 
-if BR2_nds32
-source "arch/Config.in.nds32"
-endif
-
 if BR2_nios2
 source "arch/Config.in.nios2"
 endif
 
-if BR2_or1k
-source "arch/Config.in.or1k"
-endif
-
 if BR2_powerpc || BR2_powerpc64 || BR2_powerpc64le
 source "arch/Config.in.powerpc"
 endif
 
-if BR2_riscv
-source "arch/Config.in.riscv"
-endif
-
-if BR2_s390x
-source "arch/Config.in.s390x"
-endif
-
-if BR2_sh
+if BR2_sh || BR2_sh64
 source "arch/Config.in.sh"
 endif
 

arch/Config.in.aarch64

@@ -0,0 +1,10 @@
+config BR2_ARCH
+	default "aarch64"	if BR2_aarch64
+	default "aarch64_be"	if BR2_aarch64_be
+
+config BR2_ENDIAN
+	default "LITTLE" if BR2_aarch64
+	default "BIG"	 if BR2_aarch64_be
+
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.arc

@@ -1,7 +1,7 @@
 choice
 	prompt "Target CPU"
-	default BR2_arc770d
 	depends on BR2_arc
+	default BR2_arc770d
 	help
 	    Specific CPU to use
 
@@ -13,43 +13,16 @@ config BR2_arc770d
 
 config BR2_archs38
 	bool "ARC HS38"
-	help
-	  Generic ARC HS capable of running Linux, i.e. with MMU,
-	  caches and 32-bit multiplier. Also it corresponds to the
-	  default configuration in older GNU toolchain versions.
-
-config BR2_archs38_64mpy
-	bool "ARC HS38 with 64-bit mpy"
-	help
-	  Fully featured ARC HS capable of running Linux, i.e. with
-	  MMU, caches and 64-bit multiplier.
-
-	  If you're not sure which version of ARC HS core you build
-	  for use this one.
-
-config BR2_archs38_full
-	bool "ARC HS38 with Quad MAC & FPU"
-	help
-	  Fully featured ARC HS with additional support for
-	   - Dual- and quad multiply and MC oprations
-	   - Double-precision FPU
-
-	  It corresponds to "hs38_slc_full" ARC HS template in
-	  ARChitect.
-
-config BR2_archs4x_rel31
-	bool "ARC HS48 rel 31"
-	help
-	   Latest release of HS48 processor
-	   - Dual- and quad multiply and MC oprations
-	   - Double-precision FPU
 
 endchoice
 
 # Choice of atomic instructions presence
 config BR2_ARC_ATOMIC_EXT
 	bool "Atomic extension (LLOCK/SCOND instructions)"
-	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	default y if BR2_arc770d || BR2_archs38
+
+config BR2_ARCH_HAS_ATOMICS
+	default y if BR2_ARC_ATOMIC_EXT
 
 config BR2_ARCH
 	default "arc"	if BR2_arcle
@@ -67,13 +40,6 @@ config BR2_GCC_TARGET_CPU
 	default "arc700" if BR2_arc750d
 	default "arc700" if BR2_arc770d
 	default "archs"	 if BR2_archs38
-	default "hs38"	 if BR2_archs38_64mpy
-	default "hs38_linux"	 if BR2_archs38_full
-	default "hs4x_rel31"	 if BR2_archs4x_rel31
-
-config BR2_READELF_ARCH_NAME
-	default "ARCompact"	if BR2_arc750d || BR2_arc770d
-	default "ARCv2"		if BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
 
 choice
 	prompt "MMU Page Size"
@@ -93,7 +59,7 @@ choice
 
 config BR2_ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38
 
 config BR2_ARC_PAGE_SIZE_8K
 	bool "8KB"
@@ -103,7 +69,7 @@ config BR2_ARC_PAGE_SIZE_8K
 
 config BR2_ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38
 
 endchoice
 
@@ -112,6 +78,3 @@ config BR2_ARC_PAGE_SIZE
 	default "4K" if BR2_ARC_PAGE_SIZE_4K
 	default "8K" if BR2_ARC_PAGE_SIZE_8K
 	default "16K" if BR2_ARC_PAGE_SIZE_16K
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.arm

@@ -6,21 +6,12 @@ config BR2_ARM_CPU_HAS_NEON
 config BR2_ARM_CPU_MAYBE_HAS_NEON
 	bool
 
-# For some cores, the FPU is optional
-config BR2_ARM_CPU_MAYBE_HAS_FPU
-	bool
-
-config BR2_ARM_CPU_HAS_FPU
-	bool
-
 # for some cores, VFPv2 is optional
 config BR2_ARM_CPU_MAYBE_HAS_VFPV2
 	bool
-	select BR2_ARM_CPU_MAYBE_HAS_FPU
 
 config BR2_ARM_CPU_HAS_VFPV2
 	bool
-	select BR2_ARM_CPU_HAS_FPU
 
 # for some cores, VFPv3 is optional
 config BR2_ARM_CPU_MAYBE_HAS_VFPV3
@@ -40,28 +31,6 @@ config BR2_ARM_CPU_HAS_VFPV4
 	bool
 	select BR2_ARM_CPU_HAS_VFPV3
 
-# FPv4 is always optional
-config BR2_ARM_CPU_MAYBE_HAS_FPV4
-	bool
-	select BR2_ARM_CPU_MAYBE_HAS_FPU
-
-config BR2_ARM_CPU_HAS_FPV4
-	bool
-	select BR2_ARM_CPU_HAS_FPU
-
-# FPv5 is always optional
-config BR2_ARM_CPU_MAYBE_HAS_FPV5
-	bool
-	select BR2_ARM_CPU_MAYBE_HAS_FPV4
-
-config BR2_ARM_CPU_HAS_FPV5
-	bool
-	select BR2_ARM_CPU_HAS_FPV4
-
-config BR2_ARM_CPU_HAS_FP_ARMV8
-	bool
-	select BR2_ARM_CPU_HAS_VFPV4
-
 config BR2_ARM_CPU_HAS_ARM
 	bool
 
@@ -83,21 +52,13 @@ config BR2_ARM_CPU_ARMV6
 config BR2_ARM_CPU_ARMV7A
 	bool
 
-config BR2_ARM_CPU_ARMV7M
-	bool
-
-config BR2_ARM_CPU_ARMV8A
-	bool
-
 choice
 	prompt "Target Architecture Variant"
-	default BR2_cortex_a53 if BR2_ARCH_IS_64
+	depends on BR2_arm || BR2_armeb
 	default BR2_arm926t
 	help
 	  Specific CPU variant to use
 
-if !BR2_ARCH_IS_64
-comment "armv4 cores"
 config BR2_arm920t
 	bool "arm920t"
 	select BR2_ARM_CPU_HAS_ARM
@@ -110,18 +71,6 @@ config BR2_arm922t
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_fa526
-	bool "fa526/626"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_ARMV4
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_strongarm
-	bool "strongarm sa110/sa1100"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_ARMV4
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-
-comment "armv5 cores"
 config BR2_arm926t
 	bool "arm926t"
 	select BR2_ARM_CPU_HAS_ARM
@@ -129,19 +78,6 @@ config BR2_arm926t
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_iwmmxt
-	bool "iwmmxt"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_ARMV5
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_xscale
-	bool "xscale"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_THUMB
-	select BR2_ARM_CPU_ARMV5
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-
-comment "armv6 cores"
 config BR2_arm1136j_s
 	bool "arm1136j-s"
 	select BR2_ARM_CPU_HAS_ARM
@@ -168,15 +104,6 @@ config BR2_arm1176jzf_s
 	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_ARMV6
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_arm11mpcore
-	bool "mpcore"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_MAYBE_HAS_VFPV2
-	select BR2_ARM_CPU_HAS_THUMB
-	select BR2_ARM_CPU_ARMV6
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-
-comment "armv7a cores"
 config BR2_cortex_a5
 	bool "cortex-A5"
 	select BR2_ARM_CPU_HAS_ARM
@@ -225,347 +152,44 @@ config BR2_cortex_a15
 	select BR2_ARM_CPU_HAS_THUMB2
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a15_a7
-	bool "cortex-A15/A7 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_VFPV4
+config BR2_cortex_m3
+	bool "cortex-M3"
+	select BR2_ARM_CPU_HAS_THUMB
 	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-config BR2_cortex_a17
-	bool "cortex-A17"
+config BR2_fa526
+	bool "fa526/626"
 	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7A
+	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_cortex_a17_a7
-	bool "cortex-A17/A7 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
 config BR2_pj4
 	bool "pj4"
 	select BR2_ARM_CPU_HAS_ARM
 	select BR2_ARM_CPU_HAS_VFPV3
 	select BR2_ARM_CPU_ARMV7A
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-
-comment "armv7m cores"
-config BR2_cortex_m3
-	bool "cortex-M3"
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_ARMV7M
-config BR2_cortex_m4
-	bool "cortex-M4"
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_MAYBE_HAS_FPV4
-	select BR2_ARM_CPU_ARMV7M
-config BR2_cortex_m7
-	bool "cortex-M7"
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_MAYBE_HAS_FPV5
-	select BR2_ARM_CPU_ARMV7M
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-endif # !BR2_ARCH_IS_64
-
-comment "armv8 cores"
-config BR2_cortex_a32
-	bool "cortex-A32"
-	depends on !BR2_ARCH_IS_64
+config BR2_strongarm
+	bool "strongarm sa110/sa1100"
 	select BR2_ARM_CPU_HAS_ARM
-	select BR2_ARM_CPU_HAS_NEON
-	select BR2_ARM_CPU_HAS_THUMB2
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
+	select BR2_ARM_CPU_ARMV4
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_cortex_a35
-	bool "cortex-A35"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
+config BR2_xscale
+	bool "xscale"
+	select BR2_ARM_CPU_HAS_ARM
+	select BR2_ARM_CPU_HAS_THUMB
+	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_cortex_a53
-	bool "cortex-A53"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
+config BR2_iwmmxt
+	bool "iwmmxt"
+	select BR2_ARM_CPU_HAS_ARM
+	select BR2_ARM_CPU_ARMV5
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a57
-	bool "cortex-A57"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-config BR2_cortex_a57_a53
-	bool "cortex-A57/A53 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_cortex_a72
-	bool "cortex-A72"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_cortex_a72_a53
-	bool "cortex-A72/A53 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_cortex_a73
-	bool "cortex-A73"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_cortex_a73_a35
-	bool "cortex-A73/A35 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_cortex_a73_a53
-	bool "cortex-A73/A53 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_emag
-	bool "emag"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_exynos_m1
-	bool "exynos-m1"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_falkor
-	bool "falkor"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_phecda
-	bool "phecda"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_qdf24xx
-	bool "qdf24xx"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_thunderx
-	bool "thunderx (aka octeontx)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_thunderxt81
-	bool "thunderxt81 (aka octeontx81)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_thunderxt83
-	bool "thunderxt83 (aka octeontx83)"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_thunderxt88
-	bool "thunderxt88"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_thunderxt88p1
-	bool "thunderxt88p1"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_xgene1
-	bool "xgene1"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-
-comment "armv8.1a cores"
-config BR2_thunderx2t99
-	bool "thunderx2t99"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_thunderx2t99p1
-	bool "thunderx2t99p1"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-config BR2_vulcan
-	bool "vulcan"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_7
-
-comment "armv8.2a cores"
-config BR2_cortex_a55
-	bool "cortex-A55"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-config BR2_cortex_a75
-	bool "cortex-A75"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-config BR2_cortex_a75_a55
-	bool "cortex-A75/A55 big.LITTLE"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
-config BR2_cortex_a76
-	bool "cortex-A76"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_cortex_a76_a55
-	bool "cortex-A76/A55 big.LITTLE"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_neoverse_n1
-	bool "neoverse-N1 (aka ares)"
-	select BR2_ARM_CPU_HAS_ARM if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_NEON if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_THUMB2 if !BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-config BR2_tsv110
-	bool "tsv110"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_9
-
-comment "armv8.4a cores"
-config BR2_saphira
-	bool "saphira"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARM_CPU_HAS_FP_ARMV8
-	select BR2_ARM_CPU_ARMV8A
-	select BR2_ARCH_HAS_MMU_OPTIONAL
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_8
 endchoice
 
-config BR2_ARM_ENABLE_NEON
-	bool "Enable NEON SIMD extension support"
-	depends on BR2_ARM_CPU_MAYBE_HAS_NEON
-	select BR2_ARM_CPU_HAS_NEON
-	help
-	  For some CPU cores, the NEON SIMD extension is optional.
-	  Select this option if you are certain your particular
-	  implementation has NEON support and you want to use it.
-
-config BR2_ARM_ENABLE_VFP
-	bool "Enable VFP extension support"
-	depends on BR2_ARM_CPU_MAYBE_HAS_FPU
-	select BR2_ARM_CPU_HAS_FPV5 if BR2_ARM_CPU_MAYBE_HAS_FPV5
-	select BR2_ARM_CPU_HAS_FPV4 if BR2_ARM_CPU_MAYBE_HAS_FPV4
-	select BR2_ARM_CPU_HAS_VFPV4 if BR2_ARM_CPU_MAYBE_HAS_VFPV4
-	select BR2_ARM_CPU_HAS_VFPV3 if BR2_ARM_CPU_MAYBE_HAS_VFPV3
-	select BR2_ARM_CPU_HAS_VFPV2 if BR2_ARM_CPU_MAYBE_HAS_VFPV2
-	help
-	  For some CPU cores, the VFP extension is optional. Select
-	  this option if you are certain your particular
-	  implementation has VFP support and you want to use it.
-
 choice
 	prompt "Target ABI"
-	default BR2_ARM_EABIHF if BR2_ARM_CPU_HAS_FPU
-	default BR2_ARM_EABI
 	depends on BR2_arm || BR2_armeb
+	default BR2_ARM_EABIHF if BR2_ARM_CPU_HAS_VFPV2
+	default BR2_ARM_EABI
 	help
 	  Application Binary Interface to use. The Application Binary
 	  Interface describes the calling conventions (how arguments
@@ -598,7 +222,7 @@ config BR2_ARM_EABI
 
 config BR2_ARM_EABIHF
 	bool "EABIhf"
-	depends on BR2_ARM_CPU_HAS_FPU
+	depends on BR2_ARM_CPU_MAYBE_HAS_VFPV2 || BR2_ARM_CPU_HAS_VFPV2
 	help
 	  The EABIhf is an extension of EABI which supports the 'hard'
 	  floating point model. This model uses the floating point
@@ -616,15 +240,22 @@ config BR2_ARM_EABIHF
 
 endchoice
 
+config BR2_ARM_ENABLE_NEON
+	bool "Enable NEON SIMD extension support"
+	depends on BR2_ARM_CPU_MAYBE_HAS_NEON
+	select BR2_ARM_CPU_HAS_NEON
+	help
+	  For some CPU cores, the NEON SIMD extension is optional.
+	  Select this option if you are certain your particular
+	  implementation has NEON support and you want to use it.
+
 choice
 	prompt "Floating point strategy"
-	default BR2_ARM_FPU_FP_ARMV8 if BR2_ARM_CPU_HAS_FP_ARMV8
-	default BR2_ARM_FPU_FPV5D16 if BR2_ARM_CPU_HAS_FPV5
-	default BR2_ARM_FPU_FPV4D16 if BR2_ARM_CPU_HAS_FPV4
+	depends on BR2_ARM_EABI || BR2_ARM_EABIHF
 	default BR2_ARM_FPU_VFPV4D16 if BR2_ARM_CPU_HAS_VFPV4
 	default BR2_ARM_FPU_VFPV3D16 if BR2_ARM_CPU_HAS_VFPV3
 	default BR2_ARM_FPU_VFPV2 if BR2_ARM_CPU_HAS_VFPV2
-	default BR2_ARM_SOFT_FLOAT if !BR2_ARM_CPU_HAS_FPU
+	default BR2_ARM_SOFT_FLOAT if !BR2_ARM_CPU_HAS_VFPV2
 
 config BR2_ARM_SOFT_FLOAT
 	bool "Soft float"
@@ -638,7 +269,7 @@ config BR2_ARM_SOFT_FLOAT
 
 config BR2_ARM_FPU_VFPV2
 	bool "VFPv2"
-	depends on BR2_ARM_CPU_HAS_VFPV2
+	depends on BR2_ARM_CPU_HAS_VFPV2 || BR2_ARM_CPU_MAYBE_HAS_VFPV2
 	help
 	  This option allows to use the VFPv2 floating point unit, as
 	  available in some ARMv5 processors (ARM926EJ-S) and some
@@ -651,7 +282,7 @@ config BR2_ARM_FPU_VFPV2
 
 config BR2_ARM_FPU_VFPV3
 	bool "VFPv3"
-	depends on BR2_ARM_CPU_HAS_VFPV3
+	depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
 	help
 	  This option allows to use the VFPv3 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{8, 9}). This
@@ -667,7 +298,7 @@ config BR2_ARM_FPU_VFPV3
 
 config BR2_ARM_FPU_VFPV3D16
 	bool "VFPv3-D16"
-	depends on BR2_ARM_CPU_HAS_VFPV3
+	depends on BR2_ARM_CPU_HAS_VFPV3 || BR2_ARM_CPU_MAYBE_HAS_VFPV3
 	help
 	  This option allows to use the VFPv3 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{8, 9}). This
@@ -682,7 +313,7 @@ config BR2_ARM_FPU_VFPV3D16
 
 config BR2_ARM_FPU_VFPV4
 	bool "VFPv4"
-	depends on BR2_ARM_CPU_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	help
 	  This option allows to use the VFPv4 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{5, 7, 12,
@@ -697,7 +328,7 @@ config BR2_ARM_FPU_VFPV4
 
 config BR2_ARM_FPU_VFPV4D16
 	bool "VFPv4-D16"
-	depends on BR2_ARM_CPU_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	help
 	  This option allows to use the VFPv4 floating point unit, as
 	  available in some ARMv7 processors (Cortex-A{5, 7, 12,
@@ -722,7 +353,7 @@ config BR2_ARM_FPU_NEON
 
 config BR2_ARM_FPU_NEON_VFPV4
 	bool "NEON/VFPv4"
-	depends on BR2_ARM_CPU_HAS_VFPV4
+	depends on BR2_ARM_CPU_HAS_VFPV4 || BR2_ARM_CPU_MAYBE_HAS_VFPV4
 	depends on BR2_ARM_CPU_HAS_NEON
 	help
 	  This option allows to use both the VFPv4 and the NEON SIMD
@@ -731,57 +362,10 @@ config BR2_ARM_FPU_NEON_VFPV4
 	  example on Cortex-A5 and Cortex-A7, support for VFPv4 and
 	  NEON is optional.
 
-config BR2_ARM_FPU_FPV4D16
-	bool "FPv4-D16"
-	depends on BR2_ARM_CPU_HAS_FPV4
-	help
-	  This option allows to use the FPv4-SP (single precision)
-	  floating point unit, as available in some ARMv7m processors
-	  (Cortex-M4).
-
-config BR2_ARM_FPU_FPV5D16
-	bool "FPv5-D16"
-	depends on BR2_ARM_CPU_HAS_FPV5
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-	help
-	  This option allows to use the FPv5-SP (single precision)
-	  floating point unit, as available in some ARMv7m processors
-	  (Cortex-M7).
-
-	  Note that if you want binary code that works on the earlier
-	  Cortex-M4, you should instead select FPv4-D16.
-
-config BR2_ARM_FPU_FPV5DPD16
-	bool "FPv5-DP-D16"
-	depends on BR2_ARM_CPU_HAS_FPV5
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-	help
-	  This option allows to use the FPv5-DP (double precision)
-	  floating point unit, as available in some ARMv7m processors
-	  (Cortex-M7).
-
-	  Note that if you want binary code that works on the earlier
-	  Cortex-M4, you should instead select FPv4-D16.
-
-config BR2_ARM_FPU_FP_ARMV8
-	bool "FP-ARMv8"
-	depends on BR2_ARM_CPU_HAS_FP_ARMV8
-	help
-	  This option allows to use the ARMv8 floating point unit.
-
-config BR2_ARM_FPU_NEON_FP_ARMV8
-	bool "NEON/FP-ARMv8"
-	depends on BR2_ARM_CPU_HAS_FP_ARMV8
-	depends on BR2_ARM_CPU_HAS_NEON
-	help
-	  This option allows to use both the ARMv8 floating point unit
-	  and the NEON SIMD unit for floating point operations.
-
 endchoice
 
 choice
 	prompt "ARM instruction set"
-	depends on BR2_arm || BR2_armeb
 
 config BR2_ARM_INSTRUCTIONS_ARM
 	bool "ARM"
@@ -817,105 +401,48 @@ config BR2_ARM_INSTRUCTIONS_THUMB2
 endchoice
 
 config BR2_ARCH
-	default "arm"		if BR2_arm
-	default "armeb"		if BR2_armeb
-	default "aarch64"	if BR2_aarch64
-	default "aarch64_be"	if BR2_aarch64_be
+	default "arm"	if BR2_arm
+	default "armeb"	if BR2_armeb
 
 config BR2_ENDIAN
-	default "LITTLE" if (BR2_arm || BR2_aarch64)
-	default "BIG"	 if (BR2_armeb || BR2_aarch64_be)
+	default "LITTLE" if BR2_arm
+	default "BIG"	 if BR2_armeb
+
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
 config BR2_GCC_TARGET_CPU
-	# armv4
 	default "arm920t"	if BR2_arm920t
 	default "arm922t"	if BR2_arm922t
-	default "fa526"		if BR2_fa526
-	default "strongarm"	if BR2_strongarm
-	# armv5
 	default "arm926ej-s"	if BR2_arm926t
-	default "iwmmxt"	if BR2_iwmmxt
-	default "xscale"	if BR2_xscale
-	# armv6
 	default "arm1136j-s"	if BR2_arm1136j_s
 	default "arm1136jf-s"	if BR2_arm1136jf_s
 	default "arm1176jz-s"	if BR2_arm1176jz_s
 	default "arm1176jzf-s"	if BR2_arm1176jzf_s
-	default "mpcore"	if BR2_arm11mpcore && BR2_ARM_CPU_HAS_VFPV2
-	default "mpcorenovfp"	if BR2_arm11mpcore
-	# armv7a
 	default "cortex-a5"	if BR2_cortex_a5
 	default "cortex-a7"	if BR2_cortex_a7
 	default "cortex-a8"	if BR2_cortex_a8
 	default "cortex-a9"	if BR2_cortex_a9
 	default "cortex-a12"	if BR2_cortex_a12
 	default "cortex-a15"	if BR2_cortex_a15
-	default "cortex-a15.cortex-a7"	if BR2_cortex_a15_a7
-	default "cortex-a17"	if BR2_cortex_a17
-	default "cortex-a17.cortex-a7"	if BR2_cortex_a17_a7
-	default "marvell-pj4"	if BR2_pj4
-	# armv7m
 	default "cortex-m3"	if BR2_cortex_m3
-	default "cortex-m4"	if BR2_cortex_m4
-	default "cortex-m7"	if BR2_cortex_m7
-	# armv8a
-	default "cortex-a32"	if BR2_cortex_a32
-	default "cortex-a35"	if BR2_cortex_a35
-	default "cortex-a53"	if BR2_cortex_a53
-	default "cortex-a57"	if BR2_cortex_a57
-	default "cortex-a57.cortex-a53"	if BR2_cortex_a57_a53
-	default "cortex-a72"	if BR2_cortex_a72
-	default "cortex-a72.cortex-a53"	if BR2_cortex_a72_a53
-	default "cortex-a73"	if BR2_cortex_a73
-	default "cortex-a73.cortex-a35"	if BR2_cortex_a73_a35
-	default "cortex-a73.cortex-a53"	if BR2_cortex_a73_a53
-	default "emag"		if BR2_emag
-	default "exynos-m1"	if BR2_exynos_m1
-	default "falkor"	if BR2_falkor
-	default "phecda"	if BR2_phecda
-	default "qdf24xx"	if BR2_qdf24xx
-	default "thunderx"	if BR2_thunderx && !BR2_TOOLCHAIN_GCC_AT_LEAST_9
-	default "octeontx"	if BR2_thunderx && BR2_TOOLCHAIN_GCC_AT_LEAST_9
-	default "thunderxt81"	if BR2_thunderxt81 && !BR2_TOOLCHAIN_GCC_AT_LEAST_9
-	default "octeontx81"	if BR2_thunderxt81 && BR2_TOOLCHAIN_GCC_AT_LEAST_9
-	default "thunderxt83"	if BR2_thunderxt83 && !BR2_TOOLCHAIN_GCC_AT_LEAST_9
-	default "octeontx83"	if BR2_thunderxt83 && BR2_TOOLCHAIN_GCC_AT_LEAST_9
-	default "thunderxt88"	if BR2_thunderxt88
-	default "thunderxt88p1"	if BR2_thunderxt88p1
-	default "xgene1"	if BR2_xgene1
-	# armv8.1a
-	default "thunderx2t99"	if BR2_thunderx2t99
-	default "thunderx2t99p1"	if BR2_thunderx2t99p1
-	default "vulcan"	if BR2_vulcan
-	# armv8.2a
-	default "cortex-a55"	if BR2_cortex_a55
-	default "cortex-a75"	if BR2_cortex_a75
-	default "cortex-a75.cortex-a55"	if BR2_cortex_a75_a55
-	default "cortex-a76"	if BR2_cortex_a76
-	default "cortex-a76.cortex-a55"	if BR2_cortex_a76_a55
-	default "neoverse-n1"	if BR2_neoverse_n1
-	default "tsv110"	if BR2_tsv110
-	# armv8.4a
-	default "saphira"	if BR2_saphira
+	default "fa526"		if BR2_fa526
+	default "marvell-pj4"	if BR2_pj4
+	default "strongarm"	if BR2_strongarm
+	default "xscale"	if BR2_xscale
+	default "iwmmxt"	if BR2_iwmmxt
 
 config BR2_GCC_TARGET_ABI
-	default "aapcs-linux"	if BR2_arm || BR2_armeb
-	default "lp64"		if BR2_aarch64 || BR2_aarch64_be
+	default "aapcs-linux"
 
 config BR2_GCC_TARGET_FPU
 	default "vfp"		if BR2_ARM_FPU_VFPV2
 	default "vfpv3"		if BR2_ARM_FPU_VFPV3
-	default "vfpv3-d16"	if BR2_ARM_FPU_VFPV3D16
-	default "vfpv4"		if BR2_ARM_FPU_VFPV4
-	default "vfpv4-d16"	if BR2_ARM_FPU_VFPV4D16
-	default "neon"		if BR2_ARM_FPU_NEON
-	default "neon-vfpv4"	if BR2_ARM_FPU_NEON_VFPV4
-	default "fpv4-sp-d16"   if BR2_ARM_FPU_FPV4D16
-	default "fpv5-sp-d16"	if BR2_ARM_FPU_FPV5D16
-	default "fpv5-d16"	if BR2_ARM_FPU_FPV5DPD16
-	default "fp-armv8"	if BR2_ARM_FPU_FP_ARMV8
-	default "neon-fp-armv8"	if BR2_ARM_FPU_NEON_FP_ARMV8
-	depends on BR2_arm || BR2_armeb
+	default "vfpv3-d16" 	if BR2_ARM_FPU_VFPV3D16
+	default "vfpv4" 	if BR2_ARM_FPU_VFPV4
+	default "vfpv4-d16" 	if BR2_ARM_FPU_VFPV4D16
+	default "neon" 		if BR2_ARM_FPU_NEON
+	default "neon-vfpv4" 	if BR2_ARM_FPU_NEON_VFPV4
 
 config BR2_GCC_TARGET_FLOAT_ABI
 	default "soft"		if BR2_ARM_SOFT_FLOAT
@@ -925,10 +452,3 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	default "arm"		if BR2_ARM_INSTRUCTIONS_ARM
 	default "thumb"		if BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2
-
-config BR2_READELF_ARCH_NAME
-	default "ARM"		if BR2_arm || BR2_armeb
-	default "AArch64"	if BR2_aarch64 || BR2_aarch64_be
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.bfin

@@ -0,0 +1,110 @@
+choice
+	prompt "Target CPU"
+	depends on BR2_bfin
+	default BR2_bf609
+	help
+	  Specify target CPU
+config BR2_bf606
+	bool "bf606"
+config BR2_bf607
+	bool "bf607"
+config BR2_bf608
+	bool "bf608"
+config BR2_bf609
+	bool "bf609"
+config BR2_bf512
+	bool "bf512"
+config BR2_bf514
+	bool "bf514"
+config BR2_bf516
+	bool "bf516"
+config BR2_bf518
+	bool "bf518"
+config BR2_bf522
+	bool "bf522"
+config BR2_bf523
+	bool "bf523"
+config BR2_bf524
+	bool "bf524"
+config BR2_bf525
+	bool "bf525"
+config BR2_bf526
+	bool "bf526"
+config BR2_bf527
+	bool "bf527"
+config BR2_bf531
+	bool "bf531"
+config BR2_bf532
+	bool "bf532"
+config BR2_bf533
+	bool "bf533"
+config BR2_bf534
+	bool "bf534"
+config BR2_bf536
+	bool "bf536"
+config BR2_bf537
+	bool "bf537"
+config BR2_bf538
+	bool "bf538"
+config BR2_bf539
+	bool "bf539"
+config BR2_bf542
+	bool "bf542"
+config BR2_bf544
+	bool "bf544"
+config BR2_bf547
+	bool "bf547"
+config BR2_bf548
+	bool "bf548"
+config BR2_bf549
+	bool "bf549"
+config BR2_bf561
+	bool "bf561"
+endchoice
+
+config BR2_ARCH
+	default "bfin"
+
+config BR2_ENDIAN
+	default "LITTLE"
+
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
+config BR2_GCC_TARGET_CPU
+	default bf606		if BR2_bf606
+	default bf607		if BR2_bf607
+	default bf608		if BR2_bf608
+	default bf609		if BR2_bf609
+	default bf512		if BR2_bf512
+	default bf514		if BR2_bf514
+	default bf516		if BR2_bf516
+	default bf518		if BR2_bf518
+	default bf522		if BR2_bf522
+	default bf523		if BR2_bf523
+	default bf524		if BR2_bf524
+	default bf525		if BR2_bf525
+	default bf526		if BR2_bf526
+	default bf527		if BR2_bf527
+	default bf531		if BR2_bf531
+	default bf532		if BR2_bf532
+	default bf533		if BR2_bf533
+	default bf534		if BR2_bf534
+	default bf536		if BR2_bf536
+	default bf537		if BR2_bf537
+	default bf538		if BR2_bf538
+	default bf539		if BR2_bf539
+	default bf542		if BR2_bf542
+	default bf544		if BR2_bf544
+	default bf547		if BR2_bf547
+	default bf548		if BR2_bf548
+	default bf549		if BR2_bf549
+	default bf561		if BR2_bf561
+
+config BR2_GCC_TARGET_CPU_REVISION
+	string "Target CPU revision"
+	help
+	  Specify a target CPU revision, which will be appended to the
+	  value of the -mcpu option. For example, if the selected CPU is
+	  bf609, and then selected CPU revision is "0.0", then gcc will
+	  receive the -mcpu=bf609-0.0 option.

arch/Config.in.csky

@@ -1,49 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	default BR2_ck610
-	help
-	  Specific CPU variant to use
-
-config BR2_ck610
-	# Not supported by upstream gcc <= 9, and handled as a special
-	# exception in package/gcc/Config.in.host
-	bool "ck610"
-
-config BR2_ck807
-	bool "ck807"
-
-config BR2_ck810
-	bool "ck810"
-
-config BR2_ck860
-	bool "ck860"
-
-endchoice
-
-config BR2_CSKY_FPU
-	bool "Enable FPU coprocessor"
-	depends on BR2_ck810 || BR2_ck807 || BR2_ck860
-	help
-	  You can say N here if your C-SKY CPU doesn't have a
-	  Floating-Point Coprocessor or if you don't need FPU support
-	  for your user-space programs.
-
-config BR2_CSKY_VDSP
-	bool "Enable VDSP enhanced instructions Co-processor"
-	depends on BR2_CSKY_FPU
-
-config BR2_GCC_TARGET_FLOAT_ABI
-	default "soft"		if !BR2_CSKY_FPU
-	default "hard"		if BR2_CSKY_FPU
-
-config BR2_ARCH
-	default "csky"
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_READELF_ARCH_NAME
-	default "CSKY"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.m68k

@@ -4,40 +4,13 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "BIG"
 
-# symbols used to distinguish between m68k and coldfire
-# for gcc multilib
-config BR2_m68k_m68k
-	bool
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
-config BR2_m68k_cf
-	bool
-
-# coldfire variants will be added later
-choice
-	prompt "Target CPU"
-	default BR2_m68k_68040
-	depends on BR2_m68k
-	help
-	  Specific CPU variant to use
-
-config BR2_m68k_68040
-	bool "68040"
-	select BR2_m68k_m68k
-	select BR2_ARCH_HAS_MMU_MANDATORY
-
-config BR2_m68k_cf5208
-	bool "5208"
-	select BR2_m68k_cf
-	select BR2_SOFT_FLOAT
-
-endchoice
-
-config BR2_GCC_TARGET_CPU
+config BR2_GCC_TARGET_ARCH
+	default "68000"		if BR2_m68k_68000
+	default "68010"		if BR2_m68k_68010
+	default "68020"		if BR2_m68k_68020
+	default "68030"		if BR2_m68k_68030
 	default "68040"		if BR2_m68k_68040
-	default "5208"		if BR2_m68k_cf5208
-
-config BR2_READELF_ARCH_NAME
-	default "MC68000"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-
+	default "68060"		if BR2_m68k_68060

arch/Config.in.microblaze

@@ -6,12 +6,9 @@ config BR2_ENDIAN
 	default "LITTLE" if BR2_microblazeel
 	default "BIG"	 if BR2_microblazebe
 
-config BR2_READELF_ARCH_NAME
-	default "Xilinx MicroBlaze"
-
 config BR2_microblaze
 	bool
 	default y if BR2_microblazeel || BR2_microblazebe
 
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.mips

@@ -1,152 +1,39 @@
-# mips default CPU ISAs
-config BR2_MIPS_CPU_MIPS32
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS32R2
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS32R3
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS32R5
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_MIPS_CPU_MIPS32R6
-	bool
-	select BR2_MIPS_NAN_2008
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_MIPS_CPU_MIPS64
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS64R2
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS64R3
-	bool
-	select BR2_MIPS_NAN_LEGACY
-config BR2_MIPS_CPU_MIPS64R5
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-config BR2_MIPS_CPU_MIPS64R6
-	bool
-	select BR2_MIPS_NAN_2008
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-
 choice
 	prompt "Target Architecture Variant"
+	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
 	default BR2_mips_32 if BR2_mips || BR2_mipsel
 	default BR2_mips_64 if BR2_mips64 || BR2_mips64el
-	depends on BR2_mips || BR2_mipsel || BR2_mips64 || BR2_mips64el
 	help
 	  Specific CPU variant to use
 
-	  64bit capable: 64, 64r2, 64r3, 64r5, 64r6
-	  non-64bit capable: 32, 32r2, 32r3, 32r5, 32r6
+	  64bit cabable: 64, 64r2, 64r6
+	  non-64bit capable: 32, 32r2, 32r6
 
 config BR2_mips_32
-	bool "Generic MIPS32"
+	bool "mips 32"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32
 config BR2_mips_32r2
-	bool "Generic MIPS32R2"
+	bool "mips 32r2"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-config BR2_mips_32r3
-	bool "Generic MIPS32R3"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R3
-config BR2_mips_32r5
-	bool "Generic MIPS32R5"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
 config BR2_mips_32r6
-	bool "Generic MIPS32R6"
+	bool "mips 32r6"
 	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R6
-config BR2_mips_interaptiv
-	bool "interAptiv"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_mips_m5150
-	bool "M5150"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-	select BR2_MIPS_NAN_2008
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_mips_m6250
-	bool "M6250"
-	depends on !BR2_ARCH_IS_64
-	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
-	select BR2_MIPS_CPU_MIPS32R6
-config BR2_mips_p5600
-	bool "P5600"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R5
-	select BR2_MIPS_NAN_2008
-config BR2_mips_xburst
-	bool "XBurst"
-	depends on !BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS32R2
-	help
-	  The Ingenic XBurst is a MIPS32R2 microprocessor. It has a
-	  bug in the FPU that can generate incorrect results in
-	  certain cases. The problem shows up when you have several
-	  fused madd instructions in sequence with dependant
-	  operands. This requires the -mno-fused-madd compiler option
-	  to be used in order to prevent emitting these instructions.
-
-	  See http://www.ingenic.com/en/?xburst.html
 config BR2_mips_64
-	bool "Generic MIPS64"
+	bool "mips 64"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64
 config BR2_mips_64r2
-	bool "Generic MIPS64R2"
+	bool "mips 64r2"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R2
-config BR2_mips_64r3
-	bool "Generic MIPS64R3"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R3
-config BR2_mips_64r5
-	bool "Generic MIPS64R5"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R5
 config BR2_mips_64r6
-	bool "Generic MIPS64R6"
+	bool "mips 64r6"
 	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
-config BR2_mips_i6400
-	bool "I6400"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R6
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_6
-config BR2_mips_octeon2
-	bool "Octeon II"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R2
-	help
-	  Marvell (formerly Cavium Networks) Octeon II CN60XX
-	  processors.
-config BR2_mips_octeon3
-	bool "Octeon III"
-	depends on BR2_ARCH_IS_64
-	select BR2_MIPS_CPU_MIPS64R3
-	help
-	  Marvell (formerly Cavium Networks) Octeon III CN7XXX
-	  processors.
-config BR2_mips_p6600
-	bool "P6600"
-	depends on BR2_ARCH_IS_64
-	select BR2_ARCH_HAS_NO_TOOLCHAIN_BUILDROOT
-	select BR2_MIPS_CPU_MIPS64R6
 endchoice
 
+
 choice
 	prompt "Target ABI"
-	default BR2_MIPS_NABI32
 	depends on BR2_mips64 || BR2_mips64el
+	default BR2_MIPS_NABI32
 
 	help
 	  Application Binary Interface to use
@@ -163,7 +50,6 @@ endchoice
 config BR2_MIPS_SOFT_FLOAT
 	bool "Use soft-float"
 	default y
-	depends on !BR2_mips_octeon3 # hard-float only
 	select BR2_SOFT_FLOAT
 	help
 	  If your target CPU does not have a Floating Point Unit (FPU)
@@ -171,64 +57,6 @@ config BR2_MIPS_SOFT_FLOAT
 	  floating point functions, then everything will need to be
 	  compiled with soft floating point support (-msoft-float).
 
-choice
-	prompt "FP mode"
-	default BR2_MIPS_FP32_MODE_XX
-	depends on !BR2_ARCH_IS_64 && !BR2_MIPS_SOFT_FLOAT
-	help
-	  MIPS32 supports different FP modes (32,xx,64). Information
-	  about FP modes can be found here:
-	  https://sourceware.org/binutils/docs/as/MIPS-Options.html
-	  https://dmz-portal.imgtec.com/wiki/MIPS_O32_ABI_-_FR0_and_FR1_Interlinking#5._Generating_modeless_code
-
-config BR2_MIPS_FP32_MODE_32
-	bool "32"
-	depends on !BR2_MIPS_CPU_MIPS32R6
-
-config BR2_MIPS_FP32_MODE_XX
-	bool "xx"
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_5
-
-config BR2_MIPS_FP32_MODE_64
-	bool "64"
-	depends on !BR2_MIPS_CPU_MIPS32
-endchoice
-
-config BR2_GCC_TARGET_FP32_MODE
-	default "32"	if BR2_MIPS_FP32_MODE_32
-	default "xx"	if BR2_MIPS_FP32_MODE_XX
-	default "64"	if BR2_MIPS_FP32_MODE_64
-
-config BR2_MIPS_NAN_LEGACY
-	bool
-
-config BR2_MIPS_NAN_2008
-	bool
-	select BR2_ARCH_NEEDS_GCC_AT_LEAST_4_9
-
-choice
-	prompt "Target NaN"
-	default BR2_MIPS_ENABLE_NAN_2008
-	depends on BR2_mips_32r5 || BR2_mips_64r5
-	help
-	  MIPS supports two different NaN encodings, legacy and 2008.
-	  Information about MIPS NaN encodings can be found here:
-	  https://sourceware.org/binutils/docs/as/MIPS-NaN-Encodings.html
-
-config BR2_MIPS_ENABLE_NAN_LEGACY
-	bool "legacy"
-	select BR2_MIPS_NAN_LEGACY
-
-config BR2_MIPS_ENABLE_NAN_2008
-	bool "2008"
-	depends on !BR2_MIPS_SOFT_FLOAT
-	select BR2_MIPS_NAN_2008
-endchoice
-
-config BR2_GCC_TARGET_NAN
-	default "legacy"	if BR2_MIPS_NAN_LEGACY
-	default "2008"		if BR2_MIPS_NAN_2008
-
 config BR2_ARCH
 	default "mips"		if BR2_mips
 	default "mipsel"	if BR2_mipsel
@@ -237,28 +65,18 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
-	default "BIG"		if BR2_mips || BR2_mips64
+	default "BIG" 	    	if BR2_mips || BR2_mips64
+
+config BR2_ARCH_HAS_ATOMICS
+	default y
 
 config BR2_GCC_TARGET_ARCH
 	default "mips32"	if BR2_mips_32
 	default "mips32r2"	if BR2_mips_32r2
-	default "mips32r3"	if BR2_mips_32r3
-	default "mips32r5"	if BR2_mips_32r5
 	default "mips32r6"	if BR2_mips_32r6
-	default "interaptiv"	if BR2_mips_interaptiv
-	default "m5101"		if BR2_mips_m5150
-	default "m6201"		if BR2_mips_m6250
-	default "p5600"		if BR2_mips_p5600
-	default "mips32r2"	if BR2_mips_xburst
 	default "mips64"	if BR2_mips_64
 	default "mips64r2"	if BR2_mips_64r2
-	default "mips64r3"	if BR2_mips_64r3
-	default "mips64r5"	if BR2_mips_64r5
 	default "mips64r6"	if BR2_mips_64r6
-	default "i6400"		if BR2_mips_i6400
-	default "octeon2"	if BR2_mips_octeon2
-	default "octeon3"	if BR2_mips_octeon3
-	default "p6600"		if BR2_mips_p6600
 
 config BR2_MIPS_OABI32
 	bool
@@ -268,9 +86,3 @@ config BR2_GCC_TARGET_ABI
 	default "32"		if BR2_MIPS_OABI32
 	default "n32"		if BR2_MIPS_NABI32
 	default "64"		if BR2_MIPS_NABI64
-
-config BR2_READELF_ARCH_NAME
-	default "MIPS R3000"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.nds32

@@ -1,14 +0,0 @@
-config BR2_ARCH
-	default "nds32le"
-
-config BR2_GCC_TARGET_ARCH
-	default "v3"
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_READELF_ARCH_NAME
-	default "Andes Technology compact code size embedded RISC processor family"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.nios2

@@ -4,8 +4,5 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
-config BR2_READELF_ARCH_NAME
-	default "Altera Nios II"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.or1k

@@ -1,11 +0,0 @@
-config BR2_ARCH
-	default "or1k"
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_READELF_ARCH_NAME
-	default "OpenRISC 1000"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.powerpc

@@ -71,12 +71,12 @@ config BR2_powerpc_740
 	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_7400
 	bool "7400"
-	depends on !BR2_ARCH_IS_64
 	select BR2_POWERPC_CPU_HAS_ALTIVEC
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_7450
 	bool "7450"
-	depends on !BR2_ARCH_IS_64
 	select BR2_POWERPC_CPU_HAS_ALTIVEC
+	depends on !BR2_ARCH_IS_64
 config BR2_powerpc_750
 	bool "750"
 	depends on !BR2_ARCH_IS_64
@@ -164,6 +164,9 @@ config BR2_ENDIAN
 	default "BIG"    if BR2_powerpc || BR2_powerpc64
 	default "LITTLE" if BR2_powerpc64le
 
+config BR2_ARCH_HAS_ATOMICS
+	default y
+
 config BR2_GCC_TARGET_CPU
 	default "401"		if BR2_powerpc_401
 	default "403"		if BR2_powerpc_403
@@ -205,9 +208,10 @@ config BR2_GCC_TARGET_CPU
 	default "power7"	if BR2_powerpc_power7
 	default "power8"	if BR2_powerpc_power8
 
-config BR2_READELF_ARCH_NAME
-	default "PowerPC"	if BR2_powerpc
-	default "PowerPC64"	if BR2_powerpc64 || BR2_powerpc64le
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-
+config BR2_GCC_TARGET_ABI
+	default "altivec"		if BR2_PPC_ABI_altivec
+	default "no-altivec"		if BR2_PPC_ABI_no-altivec
+	default "spe"			if BR2_PPC_ABI_spe
+	default "no-spe"		if BR2_PPC_ABI_no-spe
+	default "ibmlongdouble"		if BR2_PPC_ABI_ibmlongdouble
+	default "ieeelongdouble"	if BR2_PPC_ABI_ieeelongdouble

arch/Config.in.riscv

@@ -1,134 +0,0 @@
-# RISC-V CPU ISA extensions.
-
-config BR2_RISCV_ISA_RVI
-	bool
-
-config BR2_RISCV_ISA_RVM
-	bool
-
-config BR2_RISCV_ISA_RVA
-	bool
-
-config BR2_RISCV_ISA_RVF
-	bool
-
-config BR2_RISCV_ISA_RVD
-	bool
-
-config BR2_RISCV_ISA_RVC
-	bool
-
-choice
-	prompt "Target Architecture Variant"
-	default BR2_riscv_g
-
-config BR2_riscv_g
-	bool "General purpose (G)"
-	select BR2_RISCV_ISA_RVI
-	select BR2_RISCV_ISA_RVM
-	select BR2_RISCV_ISA_RVA
-	select BR2_RISCV_ISA_RVF
-	select BR2_RISCV_ISA_RVD
-	help
-	  General purpose (G) is equivalent to IMAFD.
-
-config BR2_riscv_custom
-	bool "Custom architecture"
-	select BR2_RISCV_ISA_RVI
-	select BR2_RISCV_ISA_CUSTOM_RVA
-
-endchoice
-
-if BR2_riscv_custom
-
-comment "Instruction Set Extensions"
-
-config BR2_RISCV_ISA_CUSTOM_RVM
-	bool "Integer Multiplication and Division (M)"
-	select BR2_RISCV_ISA_RVM
-
-config BR2_RISCV_ISA_CUSTOM_RVA
-	bool "Atomic Instructions (A)"
-	select BR2_RISCV_ISA_RVA
-
-config BR2_RISCV_ISA_CUSTOM_RVF
-	bool "Single-precision Floating-point (F)"
-	select BR2_RISCV_ISA_RVF
-
-config BR2_RISCV_ISA_CUSTOM_RVD
-	bool "Double-precision Floating-point (D)"
-	depends on BR2_RISCV_ISA_RVF
-	select BR2_RISCV_ISA_RVD
-
-config BR2_RISCV_ISA_CUSTOM_RVC
-	bool "Compressed Instructions (C)"
-	select BR2_RISCV_ISA_RVC
-endif
-
-choice
-	prompt "Target Architecture Size"
-	default BR2_RISCV_64
-
-config BR2_RISCV_32
-	bool "32-bit"
-
-config BR2_RISCV_64
-	bool "64-bit"
-	select BR2_ARCH_IS_64
-
-endchoice
-
-choice
-	prompt "Target ABI"
-	default BR2_RISCV_ABI_ILP32D if !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-	default BR2_RISCV_ABI_ILP32F if !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-	default BR2_RISCV_ABI_ILP32  if !BR2_ARCH_IS_64
-	default BR2_RISCV_ABI_LP64D  if BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-	default BR2_RISCV_ABI_LP64F  if BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-	default BR2_RISCV_ABI_LP64   if BR2_ARCH_IS_64
-
-config BR2_RISCV_ABI_ILP32
-	bool "ilp32"
-	depends on !BR2_ARCH_IS_64
-
-config BR2_RISCV_ABI_ILP32F
-	bool "ilp32f"
-	depends on !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-
-config BR2_RISCV_ABI_ILP32D
-	bool "ilp32d"
-	depends on !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-
-config BR2_RISCV_ABI_LP64
-	bool "lp64"
-	depends on BR2_ARCH_IS_64
-
-config BR2_RISCV_ABI_LP64F
-	bool "lp64f"
-	depends on BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-
-config BR2_RISCV_ABI_LP64D
-	bool "lp64d"
-	depends on BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-endchoice
-
-config BR2_ARCH
-	default "riscv32" if !BR2_ARCH_IS_64
-	default "riscv64" if BR2_ARCH_IS_64
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_GCC_TARGET_ABI
-	default "ilp32" if BR2_RISCV_ABI_ILP32
-	default "ilp32f" if BR2_RISCV_ABI_ILP32F
-	default "ilp32d" if BR2_RISCV_ABI_ILP32D
-	default "lp64" if BR2_RISCV_ABI_LP64
-	default "lp64f" if BR2_RISCV_ABI_LP64F
-	default "lp64d" if BR2_RISCV_ABI_LP64D
-
-config BR2_READELF_ARCH_NAME
-	default "RISC-V"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.s390x

@@ -1,29 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	help
-	  Specific CPU variant to use
-
-config BR2_s390x_z13
-	bool "z13"
-
-config BR2_s390x_z14
-	bool "z14"
-
-config BR2_s390x_z15
-	bool "z15"
-
-endchoice
-
-config BR2_ARCH
-	default "s390x"	if BR2_s390x
-
-config BR2_ENDIAN
-	default "BIG"
-
-config BR2_GCC_TARGET_ARCH
-	default "arch11" if BR2_s390x_z13
-	default "arch12" if BR2_s390x_z14
-	default "arch13" if BR2_s390x_z15
-
-config BR2_READELF_ARCH_NAME
-	default "IBM S/390"	if BR2_s390x

arch/Config.in.sh

@@ -1,7 +1,7 @@
 choice
 	prompt "Target Architecture Variant"
-	default BR2_sh4
 	depends on BR2_sh
+	default BR2_sh4
 	help
 	  Specific CPU variant to use
 
@@ -23,13 +23,11 @@ config BR2_ARCH
 	default "sh4eb"		if BR2_sh4eb
 	default "sh4a"		if BR2_sh4a
 	default "sh4aeb"	if BR2_sh4aeb
+	default "sh64"		if BR2_sh64
 
 config BR2_ENDIAN
-	default "LITTLE"	if BR2_sh4 || BR2_sh4a
+	default "LITTLE"	if BR2_sh4 || BR2_sh4a || BR2_sh64
 	default "BIG"		if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
 
-config BR2_READELF_ARCH_NAME
-	default "Renesas / SuperH SH"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/Config.in.sparc

@@ -1,8 +1,8 @@
 choice
 	prompt "Target Architecture Variant"
+	depends on BR2_sparc || BR2_sparc64
 	default BR2_sparc_v8 if BR2_sparc
 	default BR2_sparc_v9 if BR2_sparc64
-	depends on BR2_sparc || BR2_sparc64
 	help
 	  Specific CPU variant to use
 
@@ -28,10 +28,3 @@ config BR2_GCC_TARGET_CPU
 	default "leon3"		if BR2_sparc_leon3
 	default "v8"		if BR2_sparc_v8
 	default "ultrasparc"	if BR2_sparc_v9
-
-config BR2_READELF_ARCH_NAME
-	default "Sparc"		if BR2_sparc
-	default "Sparc v9"	if BR2_sparc64
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.x86

@@ -1,8 +1,6 @@
 # i386/x86_64 cpu features
 config BR2_X86_CPU_HAS_MMX
 	bool
-config BR2_X86_CPU_HAS_3DNOW
-	bool
 config BR2_X86_CPU_HAS_SSE
 	bool
 config BR2_X86_CPU_HAS_SSE2
@@ -22,11 +20,14 @@ config BR2_X86_CPU_HAS_AVX2
 
 choice
 	prompt "Target Architecture Variant"
-	default BR2_x86_i586 if BR2_i386
 	depends on BR2_i386 || BR2_x86_64
+	default BR2_x86_i586 if BR2_i386
 	help
 	  Specific CPU variant to use
 
+config BR2_x86_i386
+	bool "i386"
+	depends on !BR2_x86_64
 config BR2_x86_i486
 	bool "i486"
 	depends on !BR2_x86_64
@@ -52,35 +53,35 @@ config BR2_x86_pentiumpro
 	depends on !BR2_x86_64
 config BR2_x86_pentium_mmx
 	bool "pentium MMX"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
 config BR2_x86_pentium_m
 	bool "pentium mobile"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
 config BR2_x86_pentium2
 	bool "pentium2"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
 config BR2_x86_pentium3
 	bool "pentium3"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
 config BR2_x86_pentium4
 	bool "pentium4"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
 	select BR2_X86_CPU_HAS_SSE2
+	depends on !BR2_x86_64
 config BR2_x86_prescott
 	bool "prescott"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
 	select BR2_X86_CPU_HAS_SSE2
 	select BR2_X86_CPU_HAS_SSE3
+	depends on !BR2_x86_64
 config BR2_x86_nocona
 	bool "nocona"
 	select BR2_X86_CPU_HAS_MMX
@@ -103,15 +104,6 @@ config BR2_x86_corei7
 	select BR2_X86_CPU_HAS_SSSE3
 	select BR2_X86_CPU_HAS_SSE4
 	select BR2_X86_CPU_HAS_SSE42
-config BR2_x86_westmere
-	bool "westmere"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_corei7_avx
 	bool "corei7-avx"
 	select BR2_X86_CPU_HAS_MMX
@@ -140,35 +132,23 @@ config BR2_x86_atom
 	select BR2_X86_CPU_HAS_SSE2
 	select BR2_X86_CPU_HAS_SSE3
 	select BR2_X86_CPU_HAS_SSSE3
-config BR2_x86_silvermont
-	bool "silvermont"
-	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_SSE2
-	select BR2_X86_CPU_HAS_SSE3
-	select BR2_X86_CPU_HAS_SSSE3
-	select BR2_X86_CPU_HAS_SSE4
-	select BR2_X86_CPU_HAS_SSE42
 config BR2_x86_k6
 	bool "k6"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
 config BR2_x86_k6_2
 	bool "k6-2"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
+	depends on !BR2_x86_64
 config BR2_x86_athlon
 	bool "athlon"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
+	depends on !BR2_x86_64
 config BR2_x86_athlon_4
 	bool "athlon-4"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_3DNOW
+	depends on !BR2_x86_64
 config BR2_x86_opteron
 	bool "opteron"
 	select BR2_X86_CPU_HAS_MMX
@@ -212,25 +192,25 @@ config BR2_x86_geode
 	depends on !BR2_x86_64
 config BR2_x86_c3
 	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
+	depends on !BR2_x86_64
 config BR2_x86_c32
 	bool "Via C3-2 (Nehemiah cores)"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
+	depends on !BR2_x86_64
 config BR2_x86_winchip_c6
 	bool "IDT Winchip C6"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
 config BR2_x86_winchip2
 	bool "IDT Winchip 2"
-	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
+	depends on !BR2_x86_64
 endchoice
 
 config BR2_ARCH
+	default "i386"		if BR2_x86_i386
 	default "i486"		if BR2_x86_i486
 	default "i586"		if BR2_x86_i586
 	default "i586"		if BR2_x86_x1000
@@ -250,11 +230,7 @@ config BR2_ARCH
 	default "i686"		if BR2_x86_nocona && BR2_i386
 	default "i686"		if BR2_x86_core2 && BR2_i386
 	default "i686"		if BR2_x86_corei7 && BR2_i386
-	default "i686"		if BR2_x86_westmere && BR2_i386
-	default "i686"		if BR2_x86_corei7_avx && BR2_i386
-	default "i686"		if BR2_x86_core_avx2 && BR2_i386
 	default "i686"		if BR2_x86_atom && BR2_i386
-	default "i686"		if BR2_x86_silvermont && BR2_i386
 	default "i686"		if BR2_x86_opteron && BR2_i386
 	default "i686"		if BR2_x86_opteron_sse3 && BR2_i386
 	default "i686"		if BR2_x86_barcelona && BR2_i386
@@ -269,7 +245,11 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"
 
+config BR2_ARCH_HAS_ATOMICS
+	default y if !BR2_x86_i386
+
 config BR2_GCC_TARGET_ARCH
+	default "i386"		if BR2_x86_i386
 	default "i486"		if BR2_x86_i486
 	default "i586"		if BR2_x86_i586
 	default "i586"		if BR2_x86_x1000
@@ -287,8 +267,6 @@ config BR2_GCC_TARGET_ARCH
 	default "corei7-avx"	if BR2_x86_corei7_avx
 	default "core-avx2"	if BR2_x86_core_avx2
 	default "atom"		if BR2_x86_atom
-	default "westmere"	if BR2_x86_westmere
-	default "silvermont"	if BR2_x86_silvermont
 	default "k8"		if BR2_x86_opteron
 	default "k8-sse3"	if BR2_x86_opteron_sse3
 	default "barcelona"	if BR2_x86_barcelona
@@ -303,10 +281,3 @@ config BR2_GCC_TARGET_ARCH
 	default "c3"		if BR2_x86_c3
 	default "c3-2"		if BR2_x86_c32
 	default "geode"		if BR2_x86_geode
-
-config BR2_READELF_ARCH_NAME
-	default "Intel 80386"			if BR2_i386
-	default "Advanced Micro Devices X86-64" if BR2_x86_64
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-

arch/Config.in.xtensa

@@ -1,37 +1,44 @@
 choice
 	prompt "Target Architecture Variant"
-	default BR2_xtensa_fsf
 	depends on BR2_xtensa
-
+	default BR2_xtensa_fsf
 config BR2_XTENSA_CUSTOM
-	bool "Custom Xtensa processor configuration"
 	select BR2_ARCH_HAS_MMU_OPTIONAL
-
+	bool "Custom Xtensa processor configuration"
 config BR2_xtensa_fsf
-	bool "fsf - Default configuration"
 	select BR2_ARCH_HAS_MMU_MANDATORY
-
+	bool "fsf - Default configuration"
 endchoice
 
-config BR2_XTENSA_OVERLAY_FILE
-	string "Overlay file for custom configuration"
+config BR2_XTENSA_CUSTOM_NAME
+	string "Custom Xtensa processor configuration name"
 	depends on BR2_XTENSA_CUSTOM
+	default ""
 	help
-	  Enter the path to the overlay tarball for a custom processor
-	  configuration.
+	  Name given to a custom Xtensa processor configuration.
 
-	  These overlay files are tar packages with updated
-	  configuration files for various toolchain packages and Xtensa
-	  processor configurations. They are provided by the processor
-	  vendor or directly from Tensilica.
+config BR2_XTENSA_CORE_NAME
+	string
+	default BR2_XTENSA_CUSTOM_NAME	if BR2_XTENSA_CUSTOM
+	default ""			if BR2_xtensa_fsf
 
-	  The path can be either absolute, or relative to the top
-	  directory of buildroot.
+config BR2_XTENSA_OVERLAY_DIR
+	string "Overlay directory for custom configuration"
+	depends on BR2_XTENSA_CUSTOM
+	default ""
+	help
+	  Provide the directory path that contains the overlay file
+	  for a custom processor configuration. The path is relative
+	  to the top directory of buildroot.
+	  These overlay files are tar packages with updated configuration
+	  files for various toolchain packages and Xtensa processor
+	  configurations. They are provided by the processor vendor or
+	  directly from Tensilica.
 
 choice
 	prompt "Target Architecture Endianness"
-	default BR2_XTENSA_LITTLE_ENDIAN
 	depends on BR2_XTENSA_CUSTOM
+	default BR2_XTENSA_LITTLE_ENDIAN
 
 config BR2_XTENSA_LITTLE_ENDIAN
 	bool "Little endian"
@@ -48,8 +55,5 @@ config BR2_ENDIAN
 config BR2_ARCH
 	default "xtensa"	if BR2_xtensa
 
-config BR2_READELF_ARCH_NAME
-	default "Tensilica Xtensa Processor"
-
-# vim: ft=kconfig
-# -*- mode:kconfig; -*-
+config BR2_ARCH_HAS_ATOMICS
+	default y

arch/arch.mk

@@ -1,22 +0,0 @@
-################################################################################
-#
-# Architecture-specific definitions
-#
-################################################################################
-
-# Allow GCC target configuration settings to be optionally
-# overwritten by architecture specific makefiles.
-
-# Makefiles must use the GCC_TARGET_* variables below instead
-# of the BR2_GCC_TARGET_* versions.
-GCC_TARGET_ARCH := $(call qstrip,$(BR2_GCC_TARGET_ARCH))
-GCC_TARGET_ABI := $(call qstrip,$(BR2_GCC_TARGET_ABI))
-GCC_TARGET_NAN := $(call qstrip,$(BR2_GCC_TARGET_NAN))
-GCC_TARGET_FP32_MODE := $(call qstrip,$(BR2_GCC_TARGET_FP32_MODE))
-GCC_TARGET_CPU := $(call qstrip,$(BR2_GCC_TARGET_CPU))
-GCC_TARGET_FPU := $(call qstrip,$(BR2_GCC_TARGET_FPU))
-GCC_TARGET_FLOAT_ABI := $(call qstrip,$(BR2_GCC_TARGET_FLOAT_ABI))
-GCC_TARGET_MODE := $(call qstrip,$(BR2_GCC_TARGET_MODE))
-
-# Include any architecture specific makefiles.
--include $(sort $(wildcard arch/arch.mk.*))

arch/arch.mk.arc

@@ -1,17 +0,0 @@
-ifeq ($(BR2_arc),y)
-
-# -matomic is always required when the ARC core has the atomic extensions
-ifeq ($(BR2_ARC_ATOMIC_EXT),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS = -matomic
-endif
-
-# Explicitly set LD's "max-page-size" instead of relying on some defaults
-ifeq ($(BR2_ARC_PAGE_SIZE_4K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=4096
-else ifeq ($(BR2_ARC_PAGE_SIZE_8K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=8192
-else ifeq ($(BR2_ARC_PAGE_SIZE_16K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=16384
-endif
-
-endif

arch/arch.mk.csky

@@ -1,26 +0,0 @@
-#
-# Configure the GCC_TARGET_ARCH variable and append the
-# appropriate C-SKY ISA extensions.
-#
-
-ifeq ($(BR2_csky),y)
-
-ifeq ($(BR2_ck610),y)
-GCC_TARGET_CPU := ck610
-else ifeq ($(BR2_ck807),y)
-GCC_TARGET_CPU := ck807
-else ifeq ($(BR2_ck810),y)
-GCC_TARGET_CPU := ck810
-else ifeq ($(BR2_ck860),y)
-GCC_TARGET_CPU := ck860
-endif
-
-ifeq ($(BR2_CSKY_FPU),y)
-GCC_TARGET_CPU := $(GCC_TARGET_CPU)f
-endif
-
-ifeq ($(BR2_CSKY_VDSP),y)
-GCC_TARGET_CPU := $(GCC_TARGET_CPU)v
-endif
-
-endif

arch/arch.mk.riscv

@@ -1,30 +0,0 @@
-#
-# Configure the GCC_TARGET_ARCH variable and append the
-# appropriate RISC-V ISA extensions.
-#
-
-ifeq ($(BR2_riscv),y)
-
-ifeq ($(BR2_RISCV_64),y)
-GCC_TARGET_ARCH := rv64i
-else
-GCC_TARGET_ARCH := rv32i
-endif
-
-ifeq ($(BR2_RISCV_ISA_RVM),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)m
-endif
-ifeq ($(BR2_RISCV_ISA_RVA),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)a
-endif
-ifeq ($(BR2_RISCV_ISA_RVF),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)f
-endif
-ifeq ($(BR2_RISCV_ISA_RVD),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)d
-endif
-ifeq ($(BR2_RISCV_ISA_RVC),y)
-GCC_TARGET_ARCH := $(GCC_TARGET_ARCH)c
-endif
-
-endif

arch/arch.mk.xtensa

@@ -1,36 +0,0 @@
-################################################################################
-# This variable can be used by packages that need to extract the overlay.
-#
-# ARCH_XTENSA_OVERLAY_FILE is the path to the overlay tarball; empty if not
-#                          using any overlay
-#
-# Example:
-#   ifneq ($(ARCH_XTENSA_OVERLAY_FILE),)
-#       tar xf $(ARCH_XTENSA_OVERLAY_FILE) -C $(@D) --strip-components=1 gcc
-#   endif
-################################################################################
-BR_ARCH_XTENSA_OVERLAY_FILE = $(call qstrip,$(BR2_XTENSA_OVERLAY_FILE))
-ifneq ($(filter http://% https://% ftp://% scp://%,$(BR_ARCH_XTENSA_OVERLAY_FILE)),)
-ARCH_XTENSA_OVERLAY_URL = $(BR_ARCH_XTENSA_OVERLAY_FILE)
-ARCH_XTENSA_OVERLAY_FILE = $($(PKG)_DL_DIR)/$(notdir $(BR_ARCH_XTENSA_OVERLAY_FILE))
-# Do not check that file, we can't know its hash
-BR_NO_CHECK_HASH_FOR += $(notdir $(ARCH_XTENSA_OVERLAY_URL))
-else
-ARCH_XTENSA_OVERLAY_FILE = $(BR_ARCH_XTENSA_OVERLAY_FILE)
-endif
-
-################################################################################
-# arch-xtensa-overlay-extract -- extract an extensa overlay
-#
-# argument 1 is the path in which to extract
-# argument 2 is the component to extract, one of: gcc, binutils, gdb, linux,
-#            u-boot
-#
-# Example:
-#   $(call arch-xtensa-overlay-extract,/path/to/overlay.tar,$(@D),gcc)
-################################################################################
-define arch-xtensa-overlay-extract
-	$(call suitable-extractor,$(ARCH_XTENSA_OVERLAY_FILE)) \
-		$(ARCH_XTENSA_OVERLAY_FILE) | \
-	$(TAR) --strip-components=1 -C $(1) $(TAR_OPTIONS) - $(2)
-endef

board/aarch64-efi/genimage-efi.cfg

@@ -1,30 +0,0 @@
-image efi-part.vfat {
-  vfat {
-    file startup.nsh {
-      image = "efi-part/startup.nsh"
-    }
-    file EFI {
-      image = "efi-part/EFI"
-    }
-    file Image {
-      image = "Image"
-    }
-  }
-  size = 32M
-}
-
-image disk.img {
-
-  hdimage {
-  }
-
-  partition boot {
-    partition-type = 0xEF
-    image = "efi-part.vfat"
-  }
-
-  partition root {
-    partition-type = 0x83
-    image = "rootfs.ext2"
-  }
-}

board/aarch64-efi/grub.cfg

@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
-	linux /Image root=/dev/vda2 rootwait console=ttyAMA0
-}

board/aarch64-efi/post-image.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-cp -f ${BOARD_DIR}/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg

board/aarch64-efi/readme.txt

@@ -1,34 +0,0 @@
-
-The aarch64_efi_defconfig allows to build a minimal Linux system that
-can boot on all AArch64 servers providing an EFI firmware and ACPI.
-
-Building and booting
-====================
-
-$ make aarch64_efi_defconfig
-$ make
-
-The file output/images/disk.img is a complete disk image that can be
-booted, it includes the grub2 bootloader, Linux kernel and root
-filesystem.
-
-Testing under Qemu
-==================
-
-This image can also be tested using Qemu:
-
-qemu-system-aarch64 \
-	-M virt \
-	-cpu cortex-a57 \
-	-m 512 \
-	-nographic \
-	-bios </path/to/QEMU_EFI.fd> \
-	-drive file=output/images/disk.img,if=none,format=raw,id=hd0 \
-	-device virtio-blk-device,drive=hd0 \
-	-netdev user,id=eth0 \
-	-device virtio-net-device,netdev=eth0
-
-Note that </path/to/QEMU_EFI.fd> needs to point to a valid aarch64 UEFI
-firmware image for qemu.
-It may be provided by your distribution as a edk2-aarch64 or AAVMF
-package, in path such as /usr/share/edk2/aarch64/QEMU_EFI.fd .

board/acmesystems/aria-g25/genimage.cfg

@@ -1,35 +0,0 @@
-# Minimal SD card image for the Acmesystems Aria G25
-
-image boot.vfat {
-	vfat {
-		file zImage {
-			image = "zImage"
-		}
-
-		file at91-ariag25.dtb {
-			image = "at91-ariag25.dtb"
-		}
-
-		file boot.bin {
-			image = "at91sam9x5_aria-sdcardboot-linux-zimage-dt-3.8.13.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/acmesystems/aria-g25/readme.txt

@@ -1,44 +1,51 @@
-Acme Systems Aria G25
-
 Build instructions
 ==================
 
-To build an image for the Aria G25 choose the configuration
-corresponding to the Aria variant.
+As a regular user configure and then build:
 
-For 128MB RAM variant type:
-
-$ make acmesystems_aria_g25_128mb_defconfig
-
-else for 256MB RAM variant type:
-
-$ make acmesystems_aria_g25_256mb_defconfig
-
-To customize the configuration choosed type:
-
-$ make menuconfig
-
-When you are ready to start building Buildroot type:
+$ make acmesystems_aria_g25_128mb_defconfig (128MB RAM variant)
+  or...
+$ make acmesystems_aria_g25_256mb_defconfig (256MB RAM variant)
 
 $ make
 
-How to write the microSD card
-=============================
+Writing to the MicroSD card
+===========================
 
-Once the build process is finished you will have an image called
-"sdcard.img" in the output/images/ directory.
+Assuming your Aria G25 baseboard has a MicroSD socket, for example with
+the Terra baseboard, you'll need a blank MicroSD (obviously) initialized
+in a particular way to be able to boot from it.
 
-Write the bootable SD card image "sdcard.img" onto an SD card with
-"dd" command:
+Assuming the card is seen as /dev/sdb in your PC/laptop/other device
+you'll need to run the following commands as root or via sudo.
 
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+Make sure all of the card partitions are unmounted before starting.
 
-Assuming your Aria G25 baseboard has a MicroSD socket, for example
-with the Terra baseboard, insert the microSD card into the baseboard
-slot and power it.
+First we'll need to create two partitions:
 
-To get the kernel log messages you can use a DPI cable
-(http://www.acmesystems.it/DPI)
+# sfdisk -uM /dev/sdb <<EOF
+,32,6
+;
+EOF
+
+Then we'll need to create the empty filesystems:
+
+# mkdosfs -n SD_BOOT /dev/sdb1
+# mkfs.ext4 -L SD_ROOT /dev/sdb2
+
+We'll populate the first partition (boot) with the relevant files:
+
+# mount /dev/sdb1 /mnt
+# cp output/images/at91bootstrap.bin /mnt/BOOT.BIN
+# cp output/images/zImage /mnt
+# cp output/images/at91-ariag25.dtb /mnt
+# umount /mnt
+
+And the root filesystem afterwards:
+
+# mount /dev/sdb2 /mnt
+# tar -C /mnt output/images/rootfs.tar
+# umount /mnt
+
+You're done, insert the MicroSD card in the slot and enjoy.
 
-You can find additional informations, tutorials and a very
-comprehensive documentation on http://www.acmesystems.it/aria.

board/acmesystems/arietta-g25/genimage.cfg

@@ -1,35 +0,0 @@
-# Minimal SD card image for the Acmesystems Arietta G25
-
-image boot.vfat {
-	vfat {
-		file zImage {
-			image = "zImage"
-		}
-		
-		file acme-arietta.dtb {
-			image = "at91-ariettag25.dtb"
-		}
-		
-		file boot.bin {
-			image = "at91sam9x5_arietta-sdcardboot-linux-zimage-dt-3.8.13.bin"
-		} 
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/acmesystems/arietta-g25/readme.txt

@@ -1,49 +0,0 @@
-Acme Systems Arietta G25
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Arietta G25. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-You can find additional informations, tutorials and a very comprehensive
-documentation on http://www.acmesystems.it/arietta.
-
-Build instructions
-==================
-
-To build an image for the Arietta G25 choose the configuration
-corresponding to the Arietta variant.
-
-For 128MB RAM variant type:
-
-$ make acmesystems_arietta_g25_128mb_defconfig
-
-else for 256MB RAM variant type:
-
-$ make acmesystems_arietta_g25_256mb_defconfig
-
-To customize the configuration chosen type:
-
-$ make menuconfig
-
-When you are ready to start building Buildroot type:
-
-$ make
-
-How to write the microSD card
-=============================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-Insert the microSD card into the Arietta slot and power it.
-
-The image just built is fairly basic and the only output
-you will get is on serial console, please consider to use a DPI
-cable (http://www.acmesystems.it/DPI)

board/altera/post-image.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+# post-image.sh for SoCkit/SoCDK
+# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
+# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
+
+# create a DTB file copy with the name expected by the u-boot config
+# Name of the DTB is passed as the second argument to the script.
+cp -af $BINARIES_DIR/${2}.dtb  $BINARIES_DIR/socfpga.dtb

board/altera/readme.txt

@@ -0,0 +1,162 @@
+SoCkit
+
+Intro
+=====
+
+This is the buildroot board support for the Arrow SoCkit Evaluation Board
+and the Altera Cyclone 5 Development Board.
+
+A good source of information is :
+http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
+
+How it works
+============
+
+Boot process :
+--------------
+
+In summary, the bootloader has multiple stages, an hardcoded boot routine is
+loaded from an on-chip ROM.
+
+  - That first stage is scanning the SD card's partition table to find
+    partition having the 0xA2 type.
+  - This partition is expected to contain a boot image on its first 60 Kb,
+    because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
+    which will load the u-boot image.
+  - Then the u-boot image will load the Linux kernel.
+
+A good source of information for the boot process is :
+http://xillybus.com/tutorials/u-boot-image-altera-soc
+
+Note for the SPL :
+The SPL generated by the u-boot from Rocketboards doesn't seems to work,
+therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
+based on the files generated with the Altera example design.
+
+For more information about this files please look at :
+http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+The altera_sockit_defconfig configuration is a minimal configuration with
+all that is required to bring the SoCkit :
+
+  $ make altera_sockit_defconfig
+
+and for the SoC Development Board :
+
+  $ make altera_sockdk_defconfig
+
+Build everything
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    ├── rootfs.ext2
+    ├── rootfs.ext3 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── socfpga_cyclone5_sockit.dtb or socfpga_cyclone5_socdk.dtb
+    ├── socfpga.dtb
+    ├── u-boot.img
+    ├── u-boot-spl.bin
+    └── uImage
+
+
+Signing the Preloader
+---------------------
+
+*** BEWARE ****
+The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
+This tool comes as a part of the Altera development environnment (SoC EDS).
+A fork of this tool have been done by Maxime Hadjinlian and can be found here :
+https://github.com/maximeh/mkpimage
+
+Remember that without signing the u-boot-spl.bin, the board will not boot !!!
+
+  $ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
+
+Prepare your SDcard
+===================
+
+A good source of information for the partitioning process is :
+http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
+
+Create the SDcard partition table
+----------------------------------
+
+Determine the device associated to the SD card :
+
+  $ cat /proc/partitions
+
+let's assume it is /dev/mmcblk0 :
+
+  $ sudo fdisk /dev/mmcblk0
+
+Delete all previous partitions with 'd' then create the new partition table,
+using these options, pressing enter after each one:
+
+  * n p 1 9000000 +20480K t 1 b
+  * n p 2 4096 +4496384K t 83
+  * n p 3 2048 +1024K t 3 a2
+
+Using the 'p' option, the SD card's partition must look like this :
+
+Device         Boot     Start       End  Blocks  Id System
+/dev/mmcblk0p1        9000000   9041919   20960   b W95 FAT32
+/dev/mmcblk0p2           4096   8996863 4496384  83 Linux
+/dev/mmcblk0p3           2048      4095    1024  a2 Unknown
+
+Then write the partition table using 'w' and exit.
+
+Make partition one a DOS partition :
+
+  $ sudo mkdosfs /dev/mmcblk0p1
+
+Install the binaries to the SDcard
+----------------------------------
+
+Remember your binaries are located in output/images/, go inside that directory :
+
+  $ cd output/images
+
+The partition with type a2 is the partition scan by the first bootloader stage
+in the SoCkit ROM to find the next bootloader stage so we must write the signed
+preloader and the u-boot binaries in that partition :
+
+  $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
+  $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
+
+Copy the Linux kernel and its Device tree :
+
+  $ sudo mkdir /mnt/sdcard
+  $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
+  $ sudo cp socfpga.dtb uImage /mnt/sdcard
+  $ sudo umount /mnt/sdcard
+
+Copy the rootfs :
+
+  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
+  $ sudo sync
+
+It's Done!
+
+Finish
+======
+
+Eject your SDcard, insert it in your SoCkit, and power it up.
+
+if you want a serial console, you can plug a micro B USB cable on the USB-UART
+port, the serial port config to used is 57600/8-N-1.

board/altera/sockit/uboot-sockit-preloader-sample-design.patch

@@ -0,0 +1,820 @@
+From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
+From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+Date: Thu, 20 Feb 2014 11:51:31 -0500
+Subject: [PATCH] board: add to sockit a working preloader design
+
+---
+ board/altera/socfpga_cyclone5/build.h              |   2 +-
+ board/altera/socfpga_cyclone5/iocsr_config.c       | 314 ++++++++++-----------
+ board/altera/socfpga_cyclone5/pinmux_config.c      |  32 +--
+ board/altera/socfpga_cyclone5/pinmux_config.h      |   8 +-
+ board/altera/socfpga_cyclone5/sdram/sdram_config.h |  14 +-
+ .../altera/socfpga_cyclone5/sdram/sequencer_auto.h |  16 +-
+ .../sdram/sequencer_auto_ac_init.c                 |  16 +-
+ .../socfpga_cyclone5/sdram/sequencer_defines.h     |  34 +--
+ 8 files changed, 218 insertions(+), 218 deletions(-)
+
+diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
+index e5d9c3c..a369015 100644
+--- a/board/altera/socfpga_cyclone5/build.h
++++ b/board/altera/socfpga_cyclone5/build.h
+@@ -29,7 +29,7 @@
+  * Handoff files must provide user option whether to
+  * enable watchdog during preloader execution phase
+  */
+-#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(0)
++#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(1)
+ 
+ /*
+  * Handoff files must provide user option whether to enable
+diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
+index fa663e1..90fc154 100644
+--- a/board/altera/socfpga_cyclone5/iocsr_config.c
++++ b/board/altera/socfpga_cyclone5/iocsr_config.c
+@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
+ 	0xC0000000,
+ 	0x0000003F,
+ 	0x00008000,
+-	0x00020080,
+-	0x08020000,
+-	0x08000000,
+-	0x00018020,
++	0x00060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
+ 	0x00000000,
+ 	0x00004000,
+-	0x00010040,
+-	0x04010000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x000300C0,
++	0x0C030000,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x00020000,
+-	0x02008000,
+-	0x02000000,
+-	0x00000008,
+-	0x00002008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+ };
+ 
+ const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+-	0x000C0300,
+-	0x10040000,
+-	0x100000C0,
+-	0x00000040,
+-	0x00010040,
++	0x00100000,
++	0x300C0000,
++	0x300000C0,
++	0x000000C0,
++	0x000300C0,
+ 	0x00008000,
+ 	0x00080000,
+-	0x18060000,
+-	0x18000000,
+-	0x00000060,
+-	0x00018060,
++	0x20000000,
++	0x00000000,
++	0x00000080,
++	0x00020000,
+ 	0x00004000,
+-	0x00010040,
++	0x000300C0,
+ 	0x10000000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
++	0x06018060,
++	0x06018000,
+ 	0x01FE0000,
+ 	0xF8000000,
+ 	0x00000007,
+ 	0x00001000,
+-	0x00004010,
+-	0x01004000,
+-	0x01000000,
+-	0x00003004,
+-	0x00001004,
++	0x0000C030,
++	0x0300C000,
++	0x03000000,
++	0x0000300C,
++	0x0000300C,
+ 	0x00000800,
+ 	0x00000000,
+ 	0x00000000,
+-	0x00800000,
+-	0x00000002,
++	0x01800000,
++	0x00000006,
+ 	0x00002000,
+ 	0x00000400,
+ 	0x00000000,
+-	0x00401000,
++	0x00C03000,
+ 	0x00000003,
+ 	0x00000000,
+ 	0x00000000,
+ 	0x00000200,
+-	0x00600802,
++	0x00601806,
+ 	0x00000000,
+-	0x80200000,
+-	0x80000600,
+-	0x00000200,
++	0x80600000,
++	0x80000601,
++	0x00000601,
+ 	0x00000100,
+-	0x00300401,
+-	0xC0100400,
+-	0x40100000,
+-	0x40000300,
+-	0x000C0100,
++	0x00300C03,
++	0xC0300C00,
++	0xC0300000,
++	0xC0000300,
++	0x000C0300,
+ 	0x00000080,
+ };
+ 
+ const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+-	0x80040100,
++	0x300C0300,
+ 	0x00000000,
+ 	0x0FF00000,
+ 	0x00000000,
+-	0x0C010040,
++	0x0C0300C0,
+ 	0x00008000,
+-	0x18020080,
+-	0x00000000,
+-	0x08000000,
+-	0x00040020,
+-	0x06018060,
++	0x18060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
++	0x00018060,
+ 	0x00004000,
+-	0x0C010040,
+-	0x04010000,
++	0x000300C0,
++	0x0C030000,
+ 	0x00000030,
+ 	0x00000000,
+-	0x03004010,
++	0x0300C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
+-	0x02000018,
+-	0x00006008,
+-	0x01802008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+-	0x03004010,
+-	0x01004000,
+-	0x0100000C,
+-	0x00003004,
+-	0x00C01004,
++	0x0000C030,
++	0x00000000,
++	0x03000000,
++	0x0000000C,
++	0x00C0300C,
+ 	0x00000800,
+ };
+ 
+@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
+-	0x01A01C70,
++	0x34059606,
++	0x01A03CF0,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
++	0x59606803,
++	0x03CF0340,
+ 	0xD000001A,
+ 	0x068030C0,
+ 	0x10040000,
+@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
++	0x34059606,
+ 	0x01A00000,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
+-	0xD00E381A,
++	0x59606803,
++	0x03CF0340,
++	0xD01E781A,
+ 	0x068030C0,
+ 	0x10040000,
+ 	0x00200000,
+@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x01860680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00015000,
+@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
+-	0x821A00C3,
++	0xF5DE791E,
++	0x0356D348,
++	0x821A02CB,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x04000002,
+ 	0x00820000,
+ 	0x00489000,
+-	0x001A1A1A,
+-	0x085506A0,
+-	0x0000E1D4,
+-	0x045506A0,
+-	0x0000E1D4,
+-	0x085506A0,
+-	0x8000E1D4,
++	0x801A1A1A,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
+ 	0x00000200,
+ 	0x00000004,
+-	0x04000000,
+-	0x00000009,
+-	0x00002410,
++	0x00040000,
++	0x10000000,
++	0x00000000,
+ 	0x00000040,
+-	0x41000000,
+-	0x00002082,
+-	0x00000350,
+-	0x000000DA,
++	0x00010000,
++	0x40002000,
++	0x00000100,
++	0x40000002,
++	0x00000100,
++	0x40000002,
+ 	0x00000100,
+ 	0x40000002,
+ 	0x00000100,
+ 	0x00000002,
+-	0x042A8350,
+-	0x000070EA,
+-	0x86000000,
+-	0x08000004,
++	0x00020000,
++	0x08000000,
+ 	0x00000000,
+-	0x00482000,
+-	0x21800000,
+-	0x00101061,
+-	0x021541A8,
+-	0x00003875,
+-	0x011541A8,
+-	0x00003875,
+-	0x021541A8,
+-	0x20003875,
++	0x00000020,
++	0x00008000,
++	0x20001000,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
+ 	0x00000080,
+ 	0x00000001,
+-	0x41000000,
+-	0x00000002,
+-	0x00FF0904,
++	0x00010000,
++	0x04000000,
++	0x00FF0000,
+ 	0x00000000,
+-	0x90400000,
+-	0x00000820,
++	0x00004000,
++	0x00000800,
+ 	0x80000001,
+-	0x38D612AF,
+-	0x86F8E38E,
+-	0x0A0A78B4,
+-	0x000D020A,
++	0x00041419,
++	0x40000000,
++	0x04000816,
++	0x000D0000,
+ 	0x00006800,
+-	0x028A4320,
+-	0xEBB4D23D,
+-	0x8F65E791,
+-	0xA47A0F3C,
+-	0x0001A769,
+-	0x00410D00,
++	0x00000340,
++	0xD000001A,
++	0x06800000,
++	0x00340000,
++	0x0001A000,
++	0x00000D00,
+ 	0x40000068,
+-	0x3D000003,
+-	0x91EBB4D2,
+-	0x3C8F65E7,
+-	0x69A47A0F,
+-	0x000001A7,
++	0x1A000003,
++	0x00D00000,
++	0x00068000,
++	0x00003400,
++	0x000001A0,
++	0x00000401,
++	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+-	0x00000540,
+-	0x000003A8,
+-	0x10AA0D40,
+-	0x8001C3A8,
++	0x00000401,
++	0x80000008,
+ 	0x0000007F,
++	0x20000000,
+ 	0x00000000,
+-	0x00004060,
+-	0xE1208000,
++	0xE0000080,
+ 	0x0000001F,
+-	0x00004100,
++	0x00004000,
+ };
+ 
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
+index 730067e..cfd74cd 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.c
++++ b/board/altera/socfpga_cyclone5/pinmux_config.c
+@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	0, /* EMACIO18 */
+ 	0, /* EMACIO19 */
+ 	3, /* FLASHIO0 */
+-	3, /* FLASHIO1 */
++	0, /* FLASHIO1 */
+ 	3, /* FLASHIO2 */
+ 	3, /* FLASHIO3 */
+ 	0, /* FLASHIO4 */
+@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	3, /* FLASHIO9 */
+ 	3, /* FLASHIO10 */
+ 	3, /* FLASHIO11 */
+-	3, /* GENERALIO0 */
+-	3, /* GENERALIO1 */
+-	3, /* GENERALIO2 */
+-	3, /* GENERALIO3 */
+-	3, /* GENERALIO4 */
+-	3, /* GENERALIO5 */
+-	3, /* GENERALIO6 */
+-	3, /* GENERALIO7 */
+-	3, /* GENERALIO8 */
++	0, /* GENERALIO0 */
++	1, /* GENERALIO1 */
++	1, /* GENERALIO2 */
++	1, /* GENERALIO3 */
++	1, /* GENERALIO4 */
++	0, /* GENERALIO5 */
++	0, /* GENERALIO6 */
++	0, /* GENERALIO7 */
++	0, /* GENERALIO8 */
+ 	3, /* GENERALIO9 */
+ 	3, /* GENERALIO10 */
+ 	3, /* GENERALIO11 */
+ 	3, /* GENERALIO12 */
+-	2, /* GENERALIO13 */
+-	2, /* GENERALIO14 */
+-	3, /* GENERALIO15 */
+-	3, /* GENERALIO16 */
+-	2, /* GENERALIO17 */
+-	2, /* GENERALIO18 */
++	0, /* GENERALIO13 */
++	0, /* GENERALIO14 */
++	1, /* GENERALIO15 */
++	1, /* GENERALIO16 */
++	1, /* GENERALIO17 */
++	1, /* GENERALIO18 */
+ 	0, /* GENERALIO19 */
+ 	0, /* GENERALIO20 */
+ 	0, /* GENERALIO21 */
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
+index fb483ab..64c750a 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.h
++++ b/board/altera/socfpga_cyclone5/pinmux_config.h
+@@ -11,15 +11,15 @@
+ #define CONFIG_HPS_UART0 (1)
+ #define CONFIG_HPS_UART1 (0)
+ #define CONFIG_HPS_TRACE (0)
+-#define CONFIG_HPS_I2C0 (1)
+-#define CONFIG_HPS_I2C1 (0)
++#define CONFIG_HPS_I2C0 (0)
++#define CONFIG_HPS_I2C1 (1)
+ #define CONFIG_HPS_I2C2 (0)
+ #define CONFIG_HPS_I2C3 (0)
+ #define CONFIG_HPS_SPIM0 (1)
+-#define CONFIG_HPS_SPIM1 (0)
++#define CONFIG_HPS_SPIM1 (1)
+ #define CONFIG_HPS_SPIS0 (0)
+ #define CONFIG_HPS_SPIS1 (0)
+-#define CONFIG_HPS_CAN0 (1)
++#define CONFIG_HPS_CAN0 (0)
+ #define CONFIG_HPS_CAN1 (0)
+ 
+ #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+index b90d6f3..dd027ef 100755
+--- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
++++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+@@ -4,16 +4,16 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			(2)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(1)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(0)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		(1)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		(10)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(6)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(7)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(11)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			(12)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			(104)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		(3120)
+@@ -21,7 +21,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		(4)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			(14)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			(20)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			(4)
+@@ -33,7 +33,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		(15)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(40)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(32)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			(2)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+index e8c5484..919676d 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+@@ -34,7 +34,7 @@
+ #define __RW_MGR_ac_read_en 0x21
+ #define __RW_MGR_ac_mrs3_mirr 0x0C
+ #define __RW_MGR_ac_mrs2 0x05
+-#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
++#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
+ #define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
+ #define __RW_MGR_CONTENT_ac_act_1 0x106B0000
+@@ -46,8 +46,8 @@
+ #define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
+ #define __RW_MGR_CONTENT_ac_pre_all 0x10280400
+-#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
++#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
+ #define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
+@@ -55,21 +55,21 @@
+ #define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
+ #define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
+-#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
++#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
+ #define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
+ #define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
+ #define __RW_MGR_CONTENT_ac_zqcl 0x10380400
+ #define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
+-#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
++#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
+ #define __RW_MGR_CONTENT_ac_ref 0x10480000
+ #define __RW_MGR_CONTENT_ac_nop 0x30780000
+ #define __RW_MGR_CONTENT_ac_rdimm 0x10780000
+-#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
++#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
+ #define __RW_MGR_CONTENT_ac_read_en 0x33780000
+ #define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
+-#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
++#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
+ 
+ #define __RW_MGR_READ_B2B_WAIT2 0x6A
+ #define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+index e16efa1..20b4ca1 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
+ {
+ 	0x20700000,
+ 	0x20780000,
+-	0x10080431,
+-	0x10080530,
+-	0x10090044,
+-	0x100a0008,
++	0x10080471,
++	0x10080570,
++	0x10090006,
++	0x100a0218,
+ 	0x100b0000,
+ 	0x10380400,
+-	0x10080449,
+-	0x100804c8,
+-	0x100a0024,
+-	0x10090010,
++	0x10080469,
++	0x100804e8,
++	0x100a0006,
++	0x10090218,
+ 	0x100b0000,
+ 	0x30780000,
+ 	0x38780000,
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+index 52faf3f..b85b85c 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+@@ -1,28 +1,28 @@
+ #ifndef _SEQUENCER_DEFINES_H_
+ #define _SEQUENCER_DEFINES_H_
+ 
+-#define AC_ROM_MR1_MIRR 0000000100100
++#define AC_ROM_MR1_MIRR 0000000000110
+ #define AC_ROM_MR1_OCD_ENABLE
+-#define AC_ROM_MR2_MIRR 0000000010000
++#define AC_ROM_MR2_MIRR 0001000011000
+ #define AC_ROM_MR3_MIRR 0000000000000
+ #define AC_ROM_MR0_CALIB
+-#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
+-#define AC_ROM_MR0_DLL_RESET 0010100110000
+-#define AC_ROM_MR0_MIRR 0010001001001
+-#define AC_ROM_MR0 0010000110001
+-#define AC_ROM_MR1 0000001000100
+-#define AC_ROM_MR2 0000000001000
++#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
++#define AC_ROM_MR0_DLL_RESET 0010101110000
++#define AC_ROM_MR0_MIRR 0010001101001
++#define AC_ROM_MR0 0010001110001
++#define AC_ROM_MR1 0000000000110
++#define AC_ROM_MR2 0001000011000
+ #define AC_ROM_MR3 0000000000000
+ #define AFI_CLK_FREQ 401
+ #define AFI_RATE_RATIO 1
+ #define ARRIAVGZ 0
+ #define ARRIAV 0
+-#define AVL_CLK_FREQ 67
++#define AVL_CLK_FREQ 81
+ #define BFM_MODE 0
+ #define BURST2 0
+ #define CALIBRATE_BIT_SLIPS 0
+-#define CALIB_LFIFO_OFFSET 7
+-#define CALIB_VFIFO_OFFSET 5
++#define CALIB_LFIFO_OFFSET 11
++#define CALIB_VFIFO_OFFSET 9
+ #define CYCLONEV 1
+ #define DDR2 0
+ #define DDR3 1
+@@ -89,20 +89,20 @@
+ #define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
+ #define RW_MGR_MEM_CLK_EN_WIDTH 1
+ #define RW_MGR_MEM_CONTROL_WIDTH 1
+-#define RW_MGR_MEM_DATA_MASK_WIDTH 5
+-#define RW_MGR_MEM_DATA_WIDTH 40
++#define RW_MGR_MEM_DATA_MASK_WIDTH 4
++#define RW_MGR_MEM_DATA_WIDTH 32
+ #define RW_MGR_MEM_DQ_PER_READ_DQS 8
+ #define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
+-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
+-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
++#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
++#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
+ #define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
+ #define RW_MGR_MEM_NUMBER_OF_RANKS 1
+ #define RW_MGR_MEM_ODT_WIDTH 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
+ #define RW_MGR_MR0_BL 1
+-#define RW_MGR_MR0_CAS_LATENCY 3
+-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
++#define RW_MGR_MR0_CAS_LATENCY 7
++#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
+ #define RW_MGR_WRITE_TO_DEBUG_READ 1.0
+ #define SKEW_CALIBRATION 0
+ #define STATIC_FULL_CALIBRATION 1
+-- 
+1.9.0
+

board/altera/socrates_cyclone5/boot-env.txt

@@ -1,8 +0,0 @@
-linux_load_address=0x100000
-linux_dtb_load_address=0x100
-linux_dtb=socfpga_cyclone5_socrates.dtb
-linux_load=mmc rescan; fatload mmc 0:1 ${linux_load_address} zImage; fatload mmc 0:1 ${linux_dtb_load_address} ${linux_dtb}
-bootargs=console=ttyS0,115200 root=/dev/mmcblk0p3 ro rootwait
-source_env=fatload mmc 0:1 0x2000000 boot.scr; source 0x2000000
-bootcmd=run linux_load; bootz ${linux_load_address} - ${linux_dtb_load_address}
-bootdelay=1

board/altera/socrates_cyclone5/genimage.cfg

@@ -1,58 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"socfpga_cyclone5_socrates.dtb"
-		}
-	}
-	size = 8M
-}
-
-image uboot.img {
-	hdimage {
-		partition-table = "no"
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "u-boot-spl.bin.crc"
-		offset = 0
-		size = 64k
-	}
-
-	partition uboot-full {
-		in-partition-table = "no"
-		image = "u-boot.img"
-		offset = 256k
-	}
-
-	size = 1M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition uboot-env {
-		in-partition-table = "no"
-		image = "uboot-env.bin"
-		offset = 17408 # 512 * 34 -> just after gpt
-	}
-
-	partition boot {
-		partition-type = 0xc
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition uboot {
-		partition-type = 0xa2
-		image = "uboot.img"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext2"
-		size = 500M
-	}
-}

board/altera/socrates_cyclone5/readme.txt

@@ -1,52 +0,0 @@
-EBV SoCrates Evaluation Board
-
-Intro
-=====
-
-More information about this board can be found here:
-https://rocketboards.org/foswiki/Documentation/EBVSoCratesEvaluationBoard
-
-Build
-=====
-
-First, load socrates config for buildroot
-
-    make socrates_cyclone5_defconfig
-
-Build everything
-
-    make
-
-Following files will be generated in output/images
-
-.
-├── boot.vfat
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── socfpga_cyclone5_socrates.dtb
-├── u-boot-spl.bin
-├── u-boot-spl.bin.crc
-├── u-boot.bin
-├── u-boot.img
-├── uboot-env.bin
-├── uboot.img
-└── zImage
-
-
-Creating bootable SD card
-=========================
-
-Simply invoke
-
-dd if=output/images/sdcard.img of=/dev/sdX
-
-Where X is your SD card device (not partition)
-
-Booting
-=======
-
-Pins 6:8 on P18 selector is used to determine boot device. To boot socrates from
-sdcard set these pins to value 0x5 (101b). Remaining pins are used to determine
-how to configure FPGA and are not associated with booting into Linux kernel.

board/amarula/a64-relic/extlinux.conf

@@ -1,4 +0,0 @@
-label linux-4.17.0-rc3
-  kernel /Image
-  devicetree /sun50i-a64-amarula-relic.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk1p4 rootwait

board/amarula/a64-relic/genimage.cfg

@@ -1,10 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-a64-amarula-relic.dtb",
-			"extlinux"
-		}
-	}
-	size = 64M
-}

board/amarula/a64-relic/post-build.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf

board/amarula/a64-relic/readme.txt

@@ -1,90 +0,0 @@
-Amarula A64 Relic
-================
-
-Amarula A64-Relic is an Allwinner A64 based IoT device, which supports:
-- Allwinner A64 Cortex-A53
-- Mali-400MP2 GPU
-- AXP803 PMIC
-- 1GB DDR3 RAM
-- 8GB eMMC
-- AP6330 Wifi/BLE
-- MIPI-DSI
-- CSI: OV5640 sensor
-- USB OTG
-- 12V DC power supply
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Amarual+A64-Relic
-
-Build
-=====
-
-  $ make amarula_a64_relic_defconfig
-
-  $ make
-
-build files at output/images/:
-  - sunxi-spl.bin
-  - u-boot.itb
-  - Image
-  - sun50i-a64-amarula-relic.dtb
-  - boot.vfat
-  - rootfs.ext4
-
-Write eMMC
-=========
-
-The board comes with an operating system preloaded on the eMMC.
-To replace it with the Buildroot-built system, take the following
-steps
-
-1. Connect the board UART with host and open minicom(ttyUSBx/115200N8)
-
-2. Supply 12V DC for power-on the board.
-
-3. Interrupt U-Boot by pressing enter
-
-4. Create GPT partitions
-  => mmc dev 1
-  => gpt write mmc 1 $partitions
-
-5. Connect the board USB-OTG with USB slot on the host.
-
-6. Initiate fastboot
-  => fastboot 0
-
-7. Write images from host onto eMMC using fastboot
-  $ cd output/images
-  $ sudo fastboot -i 0x1f3a flash loader1 sunxi-spl.bin
-  $ sudo fastboot -i 0x1f3a flash loader2 u-boot.itb
-  $ sudo fastboot -i 0x1f3a flash esp boot.vfat
-  $ sudo fastboot -i 0x1f3a flash system rootfs.ext4
-
-Update eMMC during Development
-==============================
-
-During development, reflashing the entire filesystem image at every
-change is time consuming. A useful alternative is to directly access
-over USB the filesystem stored on the eMMC, using the USB Mass Storage
-capability of U-Boot. To achieve this:
-
-1. Build U-Boot by enabling UMS
-   $ make uboot-menuconfig
-   (select CONFIG_CMD_USB_MASS_STORAGE=y)
-
-2. Follow all 6 steps from 'Write eMMC' and mount eMMC on host
-    => mmc dev 1
-    => ums 0 mmc 1
-
-WiFi
-====
-
- # wpa_passphrase ACCESSPOINTNAME >> /etc/wpa_supplicant.conf
-   (type password and enter)
- # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
- # udhcpc -i wlan0
- # ping google.com
-
---
-Jagan Teki <jagan@amarulasolutions.com>
-29-Jun-2018

board/amarula/a64-relic/rootfs_overlay/lib/firmware/brcm/brcmfmac4330-sdio.txt

@@ -1,83 +0,0 @@
-#AP6330_NVRAM_V1.0_20121130
-#Sample variables file for BCM94330 SD FC AGB board
-manfid=0x2d0
-prodid=0x0547
-vendid=0x14e4
-devid=0x4360
-boardtype=0x05e1
-boardrev=0x1202
-boardflags=0x0080200
-nocrc=1
-xtalfreq=26000
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-ag0=254
-aa2g=1
-ccode=ALL
-pa0itssit=0x20
-pa0b0=5587
-pa0b1=-633
-pa0b2=-158
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-#rssi params for 5GHz
-rssismf5g=0x4
-rssismc5g=0x3
-rssisav5g=0x7
-#PA parameters for lower a-band
-pa1lob0=4748
-pa1lob1=-566
-pa1lob2=-180
-#PA parameters for midband
-pa1b0=4762
-pa1b1=-593
-pa1b2=-172
-#PA parameters for high band
-#pa1hib0=4596
-pa1hib0=4666
-pa1hib1=-619
-pa1hib2=-163
-rxpo5g=0
-maxp2ga0=74
-maxp5ga0=66
-maxp5gla0=66
-maxp5gha0=66
-# 2.4G Tx Power offsets
-cck2gpo=0x2222
-ofdm2gpo=0x44444444
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-# 5G Tx Power offsets
-ofdm5gpo=0x44444444
-ofdm5glpo=0x44444444
-ofdm5ghpo=0x44444444
-mcs5gpo0=0x6666
-mcs5gpo1=0x6666
-mcs5glpo0=0x6666
-mcs5glpo1=0x6666
-mcs5ghpo0=0x6666
-mcs5ghpo1=0x6666
-sromrev=3
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-cckPwrOffset=4
-swctrlmap_2g=0x44844484,0x42824282,0x40804484,0x18282,0x1ff
-triso5g=0
-swctrlmap_5g=0x00100010,0x20202020,0x20202020,0x14202,0x0f0
-rfreg033=0x19
-rfreg033_cck=0x1f
-dacrate2g=160
-dacrate5g=160
-txalpfbyp2g=1
-bphyscale=17
-cckPwrIdxCorr=-15
-pacalidx2g=50
-#pacalidx5g=20
-noise_cal_ref_2g=53
-noise_cal_po_2g=0
-noise_cal_ref_5g=52
-noise_cal_po_5g=5,0,0
-# 4330 OOB parameter: High level trigger
-muxenab=0x10
-

board/amarula/vyasa/extlinux.conf

@@ -1,4 +0,0 @@
-label Vyasa linux-next
-  kernel /boot/uImage
-  devicetree /boot/rk3288-vyasa.dtb
-  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait

board/amarula/vyasa/genimage.cfg

@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "u-boot-tpl-spl-dtb.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot-dtb.img"
-		offset = 8M
-		size = 30M # falcon mode: args @ 16M args, uImage @ 17M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/amarula/vyasa/linux_gmac.fragment

@@ -1,3 +0,0 @@
-# Currently mainline kernel exhibits issues when running rockchip gmac
-# on the board, so enable it as loadable module and insert it later
-CONFIG_DWMAC_ROCKCHIP=m

board/amarula/vyasa/patches/uboot/0001-include-configs-Increase-CONFIG_SYS_BOOTM_LEN-to-16M.patch

@@ -1,35 +0,0 @@
-From 8ee2b03039cccf64402a72dea2185d7fe1972729 Mon Sep 17 00:00:00 2001
-From: Shyam Saini <shyam.saini@amarulasolutions.com>
-Date: Mon, 15 Apr 2019 16:16:16 +0530
-Subject: [PATCH] include: configs: Increase CONFIG_SYS_BOOTM_LEN to 16MB
-
-The default value of CONFIG_SYS_BOOTM_LEN is 0x800000 i.e, 8MB which
-causes board reset because of larger uImage size.
-
-Error log snippet:
-   Booting using the fdt blob at 0x1f00000
-   Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN
-Must RESET board to recover
-resetting ...
-
-Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
----
- include/configs/rk3288_common.h | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
-index 72a54bc0ab..eab7cf4d86 100644
---- a/include/configs/rk3288_common.h
-+++ b/include/configs/rk3288_common.h
-@@ -9,6 +9,8 @@
- #include <asm/arch/hardware.h>
- #include "rockchip-common.h"
- 
-+#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* 16MB */
-+
- #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
- #define CONFIG_SYS_MALLOC_LEN		(32 << 20)
- #define CONFIG_SYS_CBSIZE		1024
--- 
-2.11.0
-

board/amarula/vyasa/post-build.sh

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname $0)"
-
-$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-tpl.bin $BINARIES_DIR/u-boot-tpl.img
-cat $BINARIES_DIR/u-boot-tpl.img $BINARIES_DIR/u-boot-spl-dtb.bin > $BINARIES_DIR/u-boot-tpl-spl-dtb.img
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf

board/amarula/vyasa/readme.txt

@@ -1,31 +0,0 @@
-Vyasa RK3288
-============
-
-Vyasa is RK3288 based Single board computer with fully supported opensource software.
-
-https://openedev.amarulasolutions.com/display/ODWIKI/Vyasa+RK3288
-
-How to build it
-===============
-
-  $ make amarula_vyasa_rk3288_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Prepare your SDCard
-===================
-
-Buildroot generates a ready-to-use SD card image that you can flash directly to
-the card. The image will be in output/images/sdcard.img.
-You can write this image directly to an SD card device (i.e. /dev/xxx):
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
-  $ sudo sync
-
-Finally, you can insert the SD card to the Vyasa RK3288 board, close J4 and boot it.

board/andes/ae3xx/ae3xx.fragment

@@ -1 +0,0 @@
-CONFIG_NDS32_BUILTIN_DTB="ae3xx"

board/andes/patches/linux/0001-nds32-Fix-boot-messages-garbled.patch

@@ -1,28 +0,0 @@
-From 90d52d180dcc5d1300dc352ca709eb6453894143 Mon Sep 17 00:00:00 2001
-From: Nylon Chen <nylon7@andestech.com>
-Date: Wed, 28 Nov 2018 16:26:46 +0800
-Subject: [PATCH] nds32: Fix boot messages garbled
-
-In order to display uart correctly we have to pass the correct setting of uart to kernel by bootarg.
-This patch will provide such settings to set the correct uart baud rate.
-
-Signed-off-by: Nylon Chen <nylon7@andestech.com>
----
- arch/nds32/boot/dts/ae3xx.dts | 1 +
- 1 file changed, 1 insertion(+)
-
-diff --git a/arch/nds32/boot/dts/ae3xx.dts b/arch/nds32/boot/dts/ae3xx.dts
-index bb39749a6673..aefe2090926a 100644
---- a/arch/nds32/boot/dts/ae3xx.dts
-+++ b/arch/nds32/boot/dts/ae3xx.dts
-@@ -6,6 +6,7 @@
- 	interrupt-parent = <&intc>;
- 
- 	chosen {
-+		bootargs = "memblock=debug earlycon console=ttyS0,38400n8 debug loglevel=7";
- 		stdout-path = &serial0;
- 	};
- 
--- 
-2.18.0
-

board/andes/readme.txt

@@ -1,49 +0,0 @@
-Intro
-=====
-
-Andestech(nds32) AE3XX Platform
-
-The AE3XX prototype demonstrates the AE3XX example platform on the FPGA. 
-It is composed of one Andestech(nds32) processor and AE3XX.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-The andes_ae3xx_defconfig configuration is a sample configuration with
-all that is required to bring the FPGA Development Board:
-
-  $ make andes_ae3xx_defconfig
-
-Build everything
-----------------
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-  $ make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-output/images/
-    +-- vmlinux
-    +-- rootfs.cpio
-    +-- rootfs.tar
-
-How to run it
-=============
-
-Run
----
-
-  Setup the Console with the rate 38400/8-N-1.
-
-  $ cd output/images
-  $ ../host/bin/nds32le-linux-gdb vmlinux
-  $ target remote [your host]
-  $ lo
-  $ c 

board/arcturus/aarch64-ucls1012a/post-build.sh

@@ -1,5 +0,0 @@
-#!/bin/sh
-
-mkdir -p ${TARGET_DIR}/lib/firmware
-cp -f ${BUILD_DIR}/linux-custom/firmware/ppfe/* ${TARGET_DIR}/lib/firmware/
-cp -f ${BUILD_DIR}/linux-custom/br2-ucls1012a.its ${BINARIES_DIR}/

board/arcturus/aarch64-ucls1012a/post-image.sh

@@ -1,6 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=${HOST_DIR}/usr/bin/mkimage
-MKIMAGE_IN=${BINARIES_DIR}/br2-ucls1012a.its
-MKIMAGE_OUT=${BINARIES_DIR}/part0-000000.itb
-${MKIMAGE} -f ${MKIMAGE_IN} ${MKIMAGE_OUT}

board/arcturus/aarch64-ucls1012a/readme.txt

@@ -1,74 +0,0 @@
-Arcturus uCLS1012A SoM
-======================
-
-This tutorial describes how to use the predefined Buildroot
-configuration for the Arcturus uCLS101A SoM platform.
-
-Additional information about the uCLS1012A System on Module can be found at
-https://www.arcturusnetworks.com/products/ucls1012a
-and product support for registered users at
-https://www.arcturusnetworks.com/support
-
-Building
---------
-
-Return to the top directory <buildrootdir> and execute the following commands.
-
-  make arcturus_ucls1012a_defconfig
-  make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- arc-ucls1012a.dtb
-    +-- Image
-    +-- part0-000000.itb
-    +-- rootfs.cpio
-    +-- rootfs.cpio.gz
-    +-- rootfs.tar
-    +-- u-boot.bin
-    +-- ucls1012a.its
-
-Flashing
---------
-
-You'll need to program the image created by buildroot into the SPI NOR flash.
-
-1. Reboot your module and via the serial console press <escape> to enter the B$
-u-boot shell.
-   From the shell you will need to update four environment variables replacing the
-   IPv4 IP Address with ones that will work with your network and tftp server.
-
-   B$ setenv ipaddr 192.168.1.81
-   B$ setenv serverip 192.168.1.80
-   B$ setenv gatewayip 192.168.1.1
-   B$ setenv netmask 255.255.255.0
-   B$ saveenv
-
-2. Enable tftp server to serve the <buildrootdir>/output/images/ folder.
-
-3. Program the new U-Boot binary (optional)
-    If you don't feel confident upgrading your bootloader then don't do it,
-    it's unnecessary most of the time.
-
-    B$ tftp u-boot.bin
-    B$ run program_uboot
-
-4. Program the ITB image (includes Kernel, DTB and Ramdisk)
-
-    B$ tftp part0-000000.itb
-    B$ run iprogram
-
-5. Booting your new system
-
-    Reboot your system by reset command
-    B$ reset
-
-        or
-
-    B$ run bootcmd
-
-Good Luck !

board/arcturus/aarch64-ucls1012a/rootfs_overlay/etc/init.d/S09modload

@@ -1,14 +0,0 @@
-#!/bin/sh
-#
-case "$1" in
-       start)
-                modprobe pfe
-                ;;
-        stop)
-                ;;
-        restart|reload)
-                ;;
-        *)
-                echo "Usage: $0 {start|stop|restart}"
-                exit 1
-esac

board/arcturus/ppc-ucp1020/readme.txt

@@ -1,74 +0,0 @@
-Arcturus uCP1020 SoM
-====================
-
-This tutorial describes how to use the predefined Buildroot
-configuration for the Arcturus uCP1020 SoM platform.
-
-Additional information about this module can be found at
-<www.arcturusnetworks.com/products/ucp1020>
-
-Building
---------
-
-  make arcturus_ucp1020_defconfig
-  make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- rootfs.jffs2
-    +-- rootfs.tar
-    +-- u-boot.bin
-    +-- ucp1020.dtb
-    +-- uImage
-
-Flashing
---------
-
-You'll need to program the files created by buildroot into the NOR flash.
-
-1. Program the new U-Boot binary (optional)
-    If you don't feel confident upgrading your bootloader then don't do it,
-    it's unnecessary most of the time.
-
-    B$ tftp u-boot.bin
-    B$ protect off 0xeff80000 +$filesize
-    B$ erase 0xeff80000 +$filesize
-    B$ cp.b $loadaddr 0xeff80000 $filesize
-    B$ protect on 0xeff80000 +$filesize
-
-2. Program the kernel
-
-    B$ tftp uImage
-    B$ erase 0xec140000 +$filesize
-    B$ cp.b $loadaddr 0xec140000 $filesize
-
-3. Program the DTB
-
-    B$ tftp ucp1020.dtb
-    B$ erase 0xec100000 +$filesize
-    B$ cp.b $loadaddr 0xec100000 $filesize
-
-4. Program the jffs2 root filesystem
-
-    B$ tftp rootfs.jffs2
-    B$ erase 0xec800000 0xee8fffff
-    B$ cp.b $loadaddr 0xec800000 $filesize
-
-5. Booting your new system
-
-    B$ setenv norboot 'setenv bootargs root=/dev/mtdblock1 rootfstype=jffs2 console=$consoledev,$baudrate;bootm 0xec140000 - 0xec100000'
-
-    If you want to set this boot option as default:
-
-    B$ setenv bootcmd 'run norboot'
-    B$ saveenv
-
-    ...or for a single boot:
-
-    B$ run norboot
-
-Good Luck !

board/arm/foundation-v8/readme.txt

@@ -3,14 +3,14 @@ ARM software simulator of the AArch64 architecture.
 
 First, one has to download the AArch64 software simulator from:
 
-  https://silver.arm.com/download/download.tm?pv=2663527
+  https://silver.arm.com/download/download.tm?pv=2482590
 
 Then, use the arm_foundationv8_defconfig configuration to build your
 Buildroot system.
 
 Finally, boot your system with:
 
- ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-4.7/Foundation_Platform \
+ ${LOCATION_OF_FOUNDATIONV8_SIMULATOR}/models/Linux64_GCC-4.1/Foundation_Platform \
     --image output/images/linux-system.axf \
     --block-device output/images/rootfs.ext2 \
     --network=nat

board/arm/juno/linux-juno-defconfig

@@ -1,169 +0,0 @@
-CONFIG_SMP=y
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_FHANDLE=y
-CONFIG_AUDIT=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_BSD_PROCESS_ACCT=y
-CONFIG_BSD_PROCESS_ACCT_V3=y
-CONFIG_TASKSTATS=y
-CONFIG_TASK_DELAY_ACCT=y
-CONFIG_TASK_XACCT=y
-CONFIG_TASK_IO_ACCOUNTING=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_MEMCG=y
-CONFIG_MEMCG_SWAP=y
-CONFIG_MEMCG_KMEM=y
-CONFIG_CGROUP_HUGETLB=y
-CONFIG_SCHED_AUTOGROUP=y
-CONFIG_BLK_DEV_INITRD=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_PROFILING=y
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_VEXPRESS=y
-CONFIG_PCI=y
-CONFIG_PCI_MSI=y
-CONFIG_PCI_HOST_GENERIC=y
-CONFIG_PCIEPORTBUS=y
-CONFIG_HOTPLUG_PCI_PCIE=y
-CONFIG_HOTPLUG_PCI=y
-CONFIG_NR_CPUS=6
-CONFIG_PREEMPT=y
-CONFIG_KSM=y
-CONFIG_TRANSPARENT_HUGEPAGE=y
-CONFIG_CMA=y
-CONFIG_CMDLINE="console=ttyAMA0"
-CONFIG_COMPAT=y
-CONFIG_CPU_IDLE=y
-CONFIG_ARM_CPUIDLE=y
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_INTERACTIVE=y
-CONFIG_ARM_BIG_LITTLE_CPUFREQ=y
-CONFIG_ARM_DT_BL_CPUFREQ=y
-CONFIG_ARM_SCPI_CPUFREQ=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IP_PNP_BOOTP=y
-CONFIG_BPF_JIT=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_BLK_DEV_LOOP=y
-CONFIG_BLK_DEV_RAM=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_ATA=y
-CONFIG_SATA_AHCI=y
-CONFIG_SATA_AHCI_PLATFORM=y
-CONFIG_AHCI_XGENE=y
-CONFIG_PATA_PLATFORM=y
-CONFIG_PATA_OF_PLATFORM=y
-CONFIG_NETDEVICES=y
-CONFIG_TUN=y
-CONFIG_SKY2=y
-CONFIG_SMC91X=y
-CONFIG_SMSC911X=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_SERIO_AMBAKMI=y
-CONFIG_LEGACY_PTY_COUNT=16
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_AMBA_PL011=y
-CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SERIAL_XILINX_PS_UART=y
-CONFIG_SERIAL_XILINX_PS_UART_CONSOLE=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_DESIGNWARE_PLATFORM=y
-CONFIG_I2C_SLAVE=y
-CONFIG_SPI=y
-CONFIG_SPI_PL022=y
-CONFIG_PTP_1588_CLOCK=m
-CONFIG_GPIO_PL061=y
-CONFIG_GPIO_XGENE=y
-CONFIG_POWER_RESET_XGENE=y
-CONFIG_POWER_RESET_SYSCON=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_VEXPRESS=m
-CONFIG_DRM=y
-CONFIG_DRM_I2C_NXP_TDA998X=y
-CONFIG_DRM_ARM=y
-CONFIG_DRM_HDLCD=y
-CONFIG_DRM_VIRTUAL_HDLCD=y
-CONFIG_FB_ARMCLCD=y
-CONFIG_LOGO=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_HCD_PLATFORM=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_USB_OHCI_HCD_PLATFORM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_ISP1760=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_ULPI=y
-CONFIG_MMC=y
-CONFIG_MMC_ARMMMCI=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SPI=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_EFI=y
-CONFIG_RTC_DRV_PL030=y
-CONFIG_RTC_DRV_PL031=y
-CONFIG_DMADEVICES=y
-CONFIG_PL330_DMA=y
-CONFIG_COMMON_CLK_SCPI=y
-CONFIG_ARM_TIMER_SP804=y
-CONFIG_MAILBOX=y
-CONFIG_ARM_MHU=y
-CONFIG_PHY_XGENE=y
-CONFIG_ARM_SCPI_PROTOCOL=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_FANOTIFY=y
-CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
-CONFIG_QUOTA=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_CUSE=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_HUGETLBFS=y
-CONFIG_EFIVAR_FS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_VIRTUALIZATION=y
-CONFIG_KVM=y
-CONFIG_DYNAMIC_DEBUG=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_DEBUG_KERNEL=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_SECURITY=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
-CONFIG_ARM64_CRYPTO=y
-CONFIG_CRYPTO_SHA1_ARM64_CE=y
-CONFIG_CRYPTO_SHA2_ARM64_CE=y
-CONFIG_CRYPTO_GHASH_ARM64_CE=y
-CONFIG_CRYPTO_AES_ARM64_CE_CCM=y
-CONFIG_CRYPTO_AES_ARM64_CE_BLK=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SIMPLE_CARD=y
-CONFIG_SND_DESIGNWARE_I2S=y
-CONFIG_CMA=y
-CONFIG_CMA_SIZE_MBYTES=64

board/arm/juno/readme.txt

@@ -1,134 +0,0 @@
-ARM Juno r1/r0
-
-Intro
-=====
-
-These instructions apply to all models of the ARM Juno:
-  - Juno r0 (does not support PCIe)
-  - Juno r1 (supports PCIe)
-  - Juno r2 (Big Cluster with A72)
-
-Buildroot will generate the kernel image, device tree blob, bootloader binaries
-and a minimal root filesystem.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-Configuring Buildroot is pretty simple, just execute:
-
-  $ make arm_juno_defconfig
-
-Build the rootfs, kernel and DTB
---------------------------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-You may now build your rootfs with:
-
-  $ make
-
-(This may take a while)
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    +-- rootfs.tar
-    +-- juno.dtb (if Juno r0 is used)
-    +-- juno-r1.dtb (if Juno r1 is used)
-    +-- juno-r2.dtb (if Juno r2 is used)
-    +-- Image
-    +-- bl1.bin
-    +-- bl2.bin
-    +-- bl2u.bin
-    +-- bl31.bin
-    +-- fip.bin
-    +-- scp-fw.bin
-    +-- u-boot.bin
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
-   $ mkfs.ext3 /dev/<your device>
-
-Preparing your rootfs
-======================
-
-Format your pen drive as a ext3 filesystem by executing:
-
-   $ mkfs.ext3 /dev/<your device>
-
-Installing your rootfs
-======================
-
-After mounting the pen drive please execute the following:
-
-   $ sudo tar -xvf output/images/rootfs.tar -C <pen drive mount path>
-
-When completed make sure to unmount the device:
-
-   $ umount <pen drive mount path>
-
-Insert the pen drive in one of the ARM Juno' USB type A connectors.
-
-Configure *.dtb in the boot configuration for Juno r0
-=====================================================
-
-SITE1/HBI0262B/images.txt
-.....
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno.dtb     ;Image File Name
-NOR3NAME: board.dtb              ;Specify Image name to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r1
-=====================================================
-
-SITE1/HBI0262C/images.txt
-......
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x00C00000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r1.dtb  ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-......
-
-Configure *.dtb in the boot configuration for Juno r2
-=====================================================
-
-SITE1/HBI0262D/images.txt
-......
-NOR3UPDATE: AUTO                 ;Image Update:NONE/AUTO/FORCE
-NOR3ADDRESS: 0x02000000          ;Image Flash Address
-NOR3FILE: \SOFTWARE\juno-r2.dtb  ;Image File Name
-NOR3NAME: board.dtb              ;Specify target filename to preserve file extension
-NOR3LOAD: 00000000               ;Image Load Address
-NOR3ENTRY: 00000000              ;Image Entry Point
-......
-
-Installing kernel image and DTB
-===============================
-
-1. Connect to the ARM Juno UART0 and execute USB_ON in the terminal
-2. Connect a USB cable between your PC and ARM Juno USB type B connector
-   A mass storage device should appear in your desktop.
-3. Open the software/ folder
-4. Copy the 'Image' file to software/
-5. Copy the 'juno-r1.dtb' (r1), 'juno.dtb' (r0) or juno-r2.dtb (r2) file to software/
-6. Copy the bootloader binaries (bl1.bin and fip.bin) to software/
-7. Press the red button in the front pannel of ARM Juno
-
-At this time, the board will erase the Flash entry for each new item and
-replace it with the lastest ones.

board/armadeus/apf27/linux-3.18.config

@@ -0,0 +1,224 @@
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_CGROUPS=y
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=m
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MACH_IMX27_DT=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_PM_DEBUG=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_CFI=y
+CONFIG_MTD_CFI_ADV_OPTIONS=y
+CONFIG_MTD_CFI_GEOMETRY=y
+# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
+# CONFIG_MTD_CFI_I2 is not set
+CONFIG_MTD_CFI_INTELEXT=y
+CONFIG_MTD_PHYSMAP=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_NETDEVICES=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CIRRUS is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_MICROCHIP is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+# CONFIG_NET_VENDOR_WIZNET is not set
+CONFIG_SMSC_PHY=y
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT2500USB=m
+CONFIG_RT73USB=m
+CONFIG_RT2800USB=m
+CONFIG_RTL8192CU=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=y
+CONFIG_KEYBOARD_IMX=m
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_JOYSTICK=y
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_W1=y
+CONFIG_W1_MASTER_MXC=y
+CONFIG_W1_SLAVE_THERM=y
+CONFIG_WATCHDOG=y
+CONFIG_IMX2_WDT=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_MEDIA_USB_SUPPORT=y
+CONFIG_USB_VIDEO_CLASS=m
+CONFIG_USB_PWC=m
+CONFIG_V4L_PLATFORM_DRIVERS=y
+CONFIG_SOC_CAMERA=m
+CONFIG_VIDEO_MX2=m
+# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
+# CONFIG_DVB_AU8522_V4L is not set
+# CONFIG_DVB_TUNER_DIB0070 is not set
+# CONFIG_DVB_TUNER_DIB0090 is not set
+CONFIG_FB=y
+# CONFIG_FB_MX3 is not set
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_USB=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_CHIPIDEA_DEBUG=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_MXC=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_LEDS_TRIGGER_TRANSIENT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_DS1374=y
+CONFIG_RTC_DRV_MXC=m
+CONFIG_DMADEVICES=y
+CONFIG_IMX_SDMA=y
+CONFIG_IMX_DMA=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_IIO=y
+CONFIG_MAX1027=y
+CONFIG_MAX5821=y
+CONFIG_PWM=y
+CONFIG_PWM_IMX=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+# CONFIG_DNOTIFY is not set
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+# CONFIG_PROC_PAGE_MONITOR is not set
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_NLS_ISO8859_15=m
+CONFIG_PRINTK_TIME=y
+CONFIG_DEBUG_INFO=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_PREEMPT is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_LL=y
+CONFIG_EARLY_PRINTK=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y

board/armadeus/apf27/linux-4.12.config

@@ -1,216 +0,0 @@
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_CGROUPS=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=m
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_IOSCHED_DEADLINE is not set
-# CONFIG_IOSCHED_CFQ is not set
-# CONFIG_ARCH_MULTI_V7 is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MACH_IMX27_DT=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_PM_DEBUG=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_CAN=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_MCP251X=m
-CONFIG_BT=m
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_CFI=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-# CONFIG_MTD_CFI_I2 is not set
-CONFIG_MTD_CFI_INTELEXT=y
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_NETDEVICES=y
-# CONFIG_NET_VENDOR_BROADCOM is not set
-# CONFIG_NET_VENDOR_CIRRUS is not set
-# CONFIG_NET_VENDOR_FARADAY is not set
-# CONFIG_NET_VENDOR_INTEL is not set
-# CONFIG_NET_VENDOR_MARVELL is not set
-# CONFIG_NET_VENDOR_MICREL is not set
-# CONFIG_NET_VENDOR_MICROCHIP is not set
-# CONFIG_NET_VENDOR_NATSEMI is not set
-# CONFIG_NET_VENDOR_SEEQ is not set
-# CONFIG_NET_VENDOR_SMSC is not set
-# CONFIG_NET_VENDOR_STMICRO is not set
-# CONFIG_NET_VENDOR_WIZNET is not set
-CONFIG_SMSC_PHY=y
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_RT2X00=m
-CONFIG_RT2500USB=m
-CONFIG_RT73USB=m
-CONFIG_RT2800USB=m
-CONFIG_RTL8187=m
-CONFIG_RTL8192CU=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=y
-CONFIG_KEYBOARD_IMX=m
-# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-CONFIG_INPUT_TOUCHSCREEN=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_W1=y
-CONFIG_W1_MASTER_MXC=y
-CONFIG_W1_SLAVE_THERM=y
-CONFIG_WATCHDOG=y
-CONFIG_IMX2_WDT=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_USB_PWC=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_SOC_CAMERA=m
-# CONFIG_MEDIA_SUBDRV_AUTOSELECT is not set
-CONFIG_FB=y
-# CONFIG_FB_MX3 is not set
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-# CONFIG_LCD_CLASS_DEVICE is not set
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_IMX_SOC=m
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_SERIAL=y
-CONFIG_USB_SERIAL_FTDI_SIO=y
-CONFIG_USB_SERIAL_PL2303=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_ETH=m
-CONFIG_USB_GADGETFS=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_MXC=y
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_BACKLIGHT=y
-CONFIG_LEDS_TRIGGER_CPU=y
-CONFIG_LEDS_TRIGGER_GPIO=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_LEDS_TRIGGER_TRANSIENT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_DRV_DS1374=y
-CONFIG_RTC_DRV_MXC=m
-CONFIG_DMADEVICES=y
-CONFIG_IMX_DMA=y
-CONFIG_IMX_SDMA=y
-# CONFIG_IOMMU_SUPPORT is not set
-CONFIG_IIO=y
-CONFIG_MAX1027=y
-CONFIG_MAX5821=y
-CONFIG_PWM=y
-CONFIG_PWM_IMX=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-# CONFIG_DNOTIFY is not set
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-# CONFIG_PROC_PAGE_MONITOR is not set
-CONFIG_TMPFS=y
-CONFIG_JFFS2_FS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_NLS_ISO8859_15=m
-CONFIG_PRINTK_TIME=y
-CONFIG_DEBUG_INFO=y
-CONFIG_DEBUG_FS=y
-# CONFIG_SCHED_DEBUG is not set
-# CONFIG_DEBUG_PREEMPT is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_LL=y
-CONFIG_EARLY_PRINTK=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y

board/armadeus/apf28/linux-3.12.config

@@ -0,0 +1,185 @@
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+# CONFIG_ARCH_MULTI_V7 is not set
+CONFIG_ARCH_MXS=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_IDLE=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_FLEXCAN=m
+CONFIG_BT=m
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_BNEP_MC_FILTER=y
+CONFIG_BT_BNEP_PROTO_FILTER=y
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_DATAFLASH=y
+CONFIG_MTD_M25P80=y
+# CONFIG_M25PXX_USE_FAST_READ is not set
+CONFIG_MTD_SST25L=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_GPMI_NAND=y
+CONFIG_MTD_UBI=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_RTL8187=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+# CONFIG_SERIO_SERPORT is not set
+CONFIG_VT_HW_CONSOLE_BINDING=y
+CONFIG_DEVPTS_MULTIPLE_INSTANCES=y
+# CONFIG_LEGACY_PTYS is not set
+# CONFIG_DEVKMEM is not set
+CONFIG_SERIAL_AMBA_PL011=y
+CONFIG_SERIAL_AMBA_PL011_CONSOLE=y
+CONFIG_SERIAL_MXS_AUART=y
+CONFIG_TTY_PRINTK=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_MXS=y
+CONFIG_SPI=y
+CONFIG_SPI_BITBANG=m
+CONFIG_SPI_MXS=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_HWMON=m
+CONFIG_WATCHDOG=y
+CONFIG_STMP3XXX_RTC_WATCHDOG=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_MEDIA_CAMERA_SUPPORT=y
+CONFIG_FB=y
+CONFIG_FB_MXS=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_LCD_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_BACKLIGHT_PWM=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_UDC=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_MXS_PHY=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_ETH=m
+CONFIG_MMC=y
+CONFIG_MMC_MXS=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_STMP=y
+CONFIG_DMADEVICES=y
+CONFIG_MXS_DMA=y
+CONFIG_STAGING=y
+CONFIG_MXS_LRADC=y
+CONFIG_IIO=y
+CONFIG_PWM=y
+CONFIG_PWM_MXS=y
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/armadeus/apf51/linux-3.12.config

@@ -0,0 +1,266 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_EMBEDDED=y
+# CONFIG_COMPAT_BRK is not set
+CONFIG_SLAB=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_BSD_DISKLABEL=y
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_MXC=y
+CONFIG_MXC_IRQ_PRIOR=y
+CONFIG_MACH_IMX51_DT=y
+CONFIG_ARM_THUMBEE=y
+CONFIG_PREEMPT=y
+CONFIG_AEABI=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_STAT_DETAILS=y
+CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
+CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
+CONFIG_CPU_FREQ_GOV_POWERSAVE=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
+CONFIG_CPU_FREQ_IMX=y
+CONFIG_CPU_IDLE=y
+CONFIG_VFP=y
+CONFIG_NEON=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_SUSPEND is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+CONFIG_CAN=m
+CONFIG_CAN_RAW=m
+CONFIG_CAN_BCM=m
+CONFIG_CAN_VCAN=m
+CONFIG_CAN_MCP251X=m
+CONFIG_BT=m
+CONFIG_BT_L2CAP=y
+CONFIG_BT_SCO=y
+CONFIG_BT_RFCOMM=m
+CONFIG_BT_RFCOMM_TTY=y
+CONFIG_BT_BNEP=m
+CONFIG_BT_HIDP=m
+CONFIG_BT_HCIBTUSB=m
+CONFIG_BT_HCIUART=m
+CONFIG_BT_HCIUART_H4=y
+CONFIG_BT_HCIUART_BCSP=y
+CONFIG_CFG80211=m
+CONFIG_MAC80211=m
+CONFIG_MAC80211_RC_PID=y
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_MXC=y
+CONFIG_MTD_UBI=y
+CONFIG_MISC_DEVICES=y
+CONFIG_EEPROM_AT24=y
+CONFIG_EEPROM_AT25=y
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_CHR_DEV_ST=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_CHR_DEV_SCH=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_SCSI_LOGGING=y
+CONFIG_SCSI_SCAN_ASYNC=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_SMSC_PHY=y
+CONFIG_NET_ETHERNET=y
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+CONFIG_RTL8187=m
+CONFIG_LIBERTAS=m
+CONFIG_LIBERTAS_SDIO=m
+CONFIG_RT2X00=m
+CONFIG_RT73USB=m
+CONFIG_ZD1211RW=m
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+CONFIG_KEYBOARD_GPIO=m
+CONFIG_KEYBOARD_IMX=m
+CONFIG_INPUT_TOUCHSCREEN=y
+CONFIG_TOUCHSCREEN_WM831X=y
+CONFIG_INPUT_MISC=y
+CONFIG_INPUT_UINPUT=m
+CONFIG_INPUT_WM831X_ON=y
+# CONFIG_LEGACY_PTYS is not set
+CONFIG_SERIAL_8250=m
+CONFIG_SERIAL_IMX=y
+CONFIG_SERIAL_IMX_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_IMX=y
+CONFIG_SPI=y
+CONFIG_SPI_IMX=y
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_WM831X=m
+CONFIG_POWER_SUPPLY=m
+CONFIG_WM831X_BACKUP=m
+CONFIG_WM831X_POWER=m
+CONFIG_HWMON=m
+CONFIG_SENSORS_AS1531=m
+CONFIG_SENSORS_WM831X=m
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_WM831X_WATCHDOG=m
+CONFIG_IMX2_WDT=y
+CONFIG_MFD_WM831X_I2C=y
+CONFIG_REGULATOR=y
+CONFIG_REGULATOR_FIXED_VOLTAGE=y
+CONFIG_MFD_IMX_IPU_V3=y
+CONFIG_MEDIA_SUPPORT=m
+CONFIG_VIDEO_DEV=m
+# CONFIG_RC_CORE is not set
+# CONFIG_MEDIA_TUNER_SIMPLE is not set
+# CONFIG_MEDIA_TUNER_TDA8290 is not set
+# CONFIG_MEDIA_TUNER_TDA827X is not set
+# CONFIG_MEDIA_TUNER_TDA18271 is not set
+# CONFIG_MEDIA_TUNER_TDA9887 is not set
+# CONFIG_MEDIA_TUNER_TEA5761 is not set
+# CONFIG_MEDIA_TUNER_TEA5767 is not set
+# CONFIG_MEDIA_TUNER_MT20XX is not set
+# CONFIG_MEDIA_TUNER_MT2060 is not set
+# CONFIG_MEDIA_TUNER_MT2266 is not set
+# CONFIG_MEDIA_TUNER_MT2131 is not set
+# CONFIG_MEDIA_TUNER_QT1010 is not set
+# CONFIG_MEDIA_TUNER_XC2028 is not set
+# CONFIG_MEDIA_TUNER_XC5000 is not set
+# CONFIG_MEDIA_TUNER_MXL5005S is not set
+# CONFIG_MEDIA_TUNER_MXL5007T is not set
+# CONFIG_MEDIA_TUNER_MC44S803 is not set
+# CONFIG_MEDIA_TUNER_MAX2165 is not set
+# CONFIG_MEDIA_TUNER_TDA18218 is not set
+CONFIG_VIDEO_VIVI=m
+CONFIG_USB_VIDEO_CLASS=m
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_FB=y
+CONFIG_FB_MX5=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_LOGO=y
+# CONFIG_LOGO_LINUX_MONO is not set
+# CONFIG_LOGO_LINUX_VGA16 is not set
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
+CONFIG_SND=m
+CONFIG_SND_MIXER_OSS=m
+CONFIG_SND_PCM_OSS=m
+# CONFIG_SND_DRIVERS is not set
+# CONFIG_SND_ARM is not set
+# CONFIG_SND_SPI is not set
+# CONFIG_SND_USB is not set
+CONFIG_SND_SOC=m
+CONFIG_SND_IMX_SOC=m
+CONFIG_SND_SOC_APF51_DEV_WM8960=m
+CONFIG_USB=y
+CONFIG_USB_DEBUG=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_OTG=y
+# CONFIG_USB_OTG_WHITELIST is not set
+CONFIG_USB_MON=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_MXC=y
+CONFIG_USB_ACM=y
+CONFIG_USB_PRINTER=y
+CONFIG_USB_WDM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_CHIPIDEA=y
+CONFIG_USB_CHIPIDEA_HOST=y
+CONFIG_USB_PHY=y
+CONFIG_NOP_USB_XCEIV=y
+CONFIG_USB_GPIO_VBUS=y
+CONFIG_USB_ULPI=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_ETH=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_USB_G_HID=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PLTFM=y
+CONFIG_MMC_SDHCI_ESDHC_IMX=y
+CONFIG_MMC_SPI=m
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_WM831X_STATUS=m
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_MXC=y
+CONFIG_RTC_DRV_WM831X=y
+CONFIG_STAGING=y
+CONFIG_IIO=m
+CONFIG_EXT2_FS=y
+CONFIG_EXT2_FS_XATTR=y
+CONFIG_EXT2_FS_POSIX_ACL=y
+CONFIG_EXT2_FS_SECURITY=y
+CONFIG_EXT2_FS_XIP=y
+CONFIG_EXT3_FS=y
+CONFIG_EXT3_FS_POSIX_ACL=y
+CONFIG_EXT3_FS_SECURITY=y
+CONFIG_AUTOFS4_FS=y
+CONFIG_ISO9660_FS=y
+CONFIG_JOLIET=y
+CONFIG_ZISOFS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_JFFS2_FS=y
+CONFIG_JFFS2_COMPRESSION_OPTIONS=y
+CONFIG_JFFS2_LZO=y
+CONFIG_JFFS2_CMODE_NONE=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_FS=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set

board/armadeus/apf51/linux-4.4.config

@@ -1,278 +0,0 @@
-CONFIG_EXPERIMENTAL=y
-# CONFIG_LOCALVERSION_AUTO is not set
-# CONFIG_SWAP is not set
-CONFIG_SYSVIPC=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_SLAB=y
-CONFIG_PROFILING=y
-CONFIG_OPROFILE=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-# CONFIG_BLK_DEV_BSG is not set
-CONFIG_PARTITION_ADVANCED=y
-CONFIG_BSD_DISKLABEL=y
-# CONFIG_IOSCHED_CFQ is not set
-CONFIG_ARCH_MXC=y
-CONFIG_MXC_IRQ_PRIOR=y
-CONFIG_SOC_IMX51=y
-CONFIG_ARM_THUMBEE=y
-CONFIG_PREEMPT=y
-CONFIG_AEABI=y
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CPU_FREQ=y
-CONFIG_CPU_FREQ_STAT_DETAILS=y
-CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE=y
-CONFIG_CPU_FREQ_GOV_PERFORMANCE=y
-CONFIG_CPU_FREQ_GOV_POWERSAVE=y
-CONFIG_CPU_FREQ_GOV_ONDEMAND=y
-CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y
-CONFIG_CPU_FREQ_IMX=y
-CONFIG_CPU_IDLE=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_MULTICAST=y
-CONFIG_IP_PNP=y
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-CONFIG_IPV6=y
-CONFIG_CAN=m
-CONFIG_CAN_RAW=m
-CONFIG_CAN_BCM=m
-CONFIG_CAN_VCAN=m
-CONFIG_CAN_MCP251X=m
-CONFIG_BT=m
-CONFIG_BT_L2CAP=y
-CONFIG_BT_SCO=y
-CONFIG_BT_RFCOMM=m
-CONFIG_BT_RFCOMM_TTY=y
-CONFIG_BT_BNEP=m
-CONFIG_BT_HIDP=m
-CONFIG_BT_HCIBTUSB=m
-CONFIG_BT_HCIUART=m
-CONFIG_BT_HCIUART_H4=y
-CONFIG_BT_HCIUART_BCSP=y
-CONFIG_CFG80211=m
-CONFIG_MAC80211=m
-CONFIG_MAC80211_RC_PID=y
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_FW_LOADER=m
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_MXC=y
-CONFIG_MTD_UBI=y
-CONFIG_MISC_DEVICES=y
-CONFIG_EEPROM_AT24=y
-CONFIG_EEPROM_AT25=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_CHR_DEV_ST=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_CHR_DEV_SCH=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_SCSI_LOGGING=y
-CONFIG_SCSI_SCAN_ASYNC=y
-CONFIG_NETDEVICES=y
-CONFIG_MII=y
-CONFIG_SMSC_PHY=y
-CONFIG_NET_ETHERNET=y
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-CONFIG_RTL8187=m
-CONFIG_LIBERTAS=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_RT2X00=m
-CONFIG_RT73USB=m
-CONFIG_ZD1211RW=m
-CONFIG_INPUT_JOYDEV=y
-CONFIG_INPUT_EVDEV=y
-CONFIG_KEYBOARD_GPIO=m
-CONFIG_KEYBOARD_IMX=m
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_WM831X=y
-CONFIG_TOUCHSCREEN_MC13XXX=m
-CONFIG_INPUT_MISC=y
-CONFIG_INPUT_MC13783_PWRBUTTON=m
-CONFIG_INPUT_UINPUT=m
-CONFIG_INPUT_WM831X_ON=y
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=m
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-# CONFIG_HW_RANDOM is not set
-CONFIG_I2C=y
-CONFIG_I2C_CHARDEV=y
-CONFIG_I2C_IMX=y
-CONFIG_SPI=y
-CONFIG_SPI_IMX=y
-CONFIG_SPI_SPIDEV=m
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_WM831X=m
-CONFIG_POWER_SUPPLY=y
-CONFIG_WM831X_BACKUP=m
-CONFIG_WM831X_POWER=m
-CONFIG_HWMON=m
-CONFIG_SENSORS_AS1531=m
-CONFIG_SENSORS_MC13783_ADC=m
-CONFIG_SENSORS_WM831X=m
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_WM831X_WATCHDOG=m
-CONFIG_IMX2_WDT=y
-CONFIG_MFD_MC13XXX_I2C=y
-CONFIG_MFD_WM831X_I2C=y
-CONFIG_REGULATOR=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_REGULATOR_MC13892=m
-CONFIG_IMX_IPUV3_CORE=y
-CONFIG_DRM=y
-CONFIG_MFD_IMX_IPU_V3=y
-CONFIG_MEDIA_SUPPORT=m
-CONFIG_VIDEO_DEV=m
-# CONFIG_RC_CORE is not set
-# CONFIG_MEDIA_TUNER_SIMPLE is not set
-# CONFIG_MEDIA_TUNER_TDA8290 is not set
-# CONFIG_MEDIA_TUNER_TDA827X is not set
-# CONFIG_MEDIA_TUNER_TDA18271 is not set
-# CONFIG_MEDIA_TUNER_TDA9887 is not set
-# CONFIG_MEDIA_TUNER_TEA5761 is not set
-# CONFIG_MEDIA_TUNER_TEA5767 is not set
-# CONFIG_MEDIA_TUNER_MT20XX is not set
-# CONFIG_MEDIA_TUNER_MT2060 is not set
-# CONFIG_MEDIA_TUNER_MT2266 is not set
-# CONFIG_MEDIA_TUNER_MT2131 is not set
-# CONFIG_MEDIA_TUNER_QT1010 is not set
-# CONFIG_MEDIA_TUNER_XC2028 is not set
-# CONFIG_MEDIA_TUNER_XC5000 is not set
-# CONFIG_MEDIA_TUNER_MXL5005S is not set
-# CONFIG_MEDIA_TUNER_MXL5007T is not set
-# CONFIG_MEDIA_TUNER_MC44S803 is not set
-# CONFIG_MEDIA_TUNER_MAX2165 is not set
-# CONFIG_MEDIA_TUNER_TDA18218 is not set
-CONFIG_VIDEO_VIVI=m
-CONFIG_USB_VIDEO_CLASS=m
-# CONFIG_RADIO_ADAPTERS is not set
-CONFIG_FB=y
-CONFIG_FB_MX5=y
-CONFIG_BACKLIGHT_LCD_SUPPORT=y
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FONTS=y
-CONFIG_FONT_8x8=y
-CONFIG_LOGO=y
-# CONFIG_LOGO_LINUX_MONO is not set
-# CONFIG_LOGO_LINUX_VGA16 is not set
-CONFIG_SOUND=m
-# CONFIG_SOUND_OSS_CORE_PRECLAIM is not set
-CONFIG_SND=m
-CONFIG_SND_MIXER_OSS=m
-CONFIG_SND_PCM_OSS=m
-# CONFIG_SND_DRIVERS is not set
-# CONFIG_SND_ARM is not set
-# CONFIG_SND_SPI is not set
-# CONFIG_SND_USB is not set
-CONFIG_SND_SOC=m
-CONFIG_SND_IMX_SOC=m
-CONFIG_SND_SOC_APF51_DEV_WM8960=m
-CONFIG_USB=y
-CONFIG_USB_DEBUG=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_DEVICEFS=y
-# CONFIG_USB_DEVICE_CLASS is not set
-CONFIG_USB_SUSPEND=y
-CONFIG_USB_OTG=y
-# CONFIG_USB_OTG_WHITELIST is not set
-CONFIG_USB_MON=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_MXC=y
-CONFIG_USB_ACM=y
-CONFIG_USB_PRINTER=y
-CONFIG_USB_WDM=y
-CONFIG_USB_STORAGE=y
-CONFIG_USB_CHIPIDEA=y
-CONFIG_USB_CHIPIDEA_UDC=y
-CONFIG_USB_CHIPIDEA_HOST=y
-CONFIG_USB_PHY=y
-CONFIG_NOP_USB_XCEIV=y
-CONFIG_USB_GPIO_VBUS=y
-CONFIG_USB_ULPI=y
-CONFIG_USB_GADGET=y
-CONFIG_USB_GADGET_DEBUG_FILES=y
-CONFIG_USB_GADGET_DEBUG_FS=y
-CONFIG_USB_ETH=m
-CONFIG_USB_MASS_STORAGE=m
-CONFIG_USB_G_SERIAL=m
-CONFIG_USB_CDC_COMPOSITE=m
-CONFIG_USB_G_MULTI=m
-CONFIG_USB_G_MULTI_CDC=y
-CONFIG_USB_G_HID=m
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_MMC_SDHCI_ESDHC_IMX=y
-CONFIG_MMC_SPI=m
-CONFIG_NEW_LEDS=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_WM831X_STATUS=m
-CONFIG_LEDS_MC13783=m
-CONFIG_LEDS_TRIGGERS=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_RTC_CLASS=y
-CONFIG_RTC_MXC=y
-CONFIG_RTC_DRV_WM831X=y
-CONFIG_RTC_DRV_MC13XXX=m
-CONFIG_STAGING=y
-CONFIG_DRM_IMX=y
-CONFIG_DRM_IMX_FB_HELPER=y
-CONFIG_DRM_IMX_PARALLEL_DISPLAY=y
-CONFIG_DRM_IMX_TVE=y
-CONFIG_DRM_IMX_IPUV3=y
-CONFIG_IIO=m
-CONFIG_EXT2_FS=y
-CONFIG_EXT2_FS_XATTR=y
-CONFIG_EXT2_FS_POSIX_ACL=y
-CONFIG_EXT2_FS_SECURITY=y
-CONFIG_EXT2_FS_XIP=y
-CONFIG_EXT3_FS=y
-CONFIG_EXT3_FS_POSIX_ACL=y
-CONFIG_EXT3_FS_SECURITY=y
-CONFIG_EXT4_FS=y
-CONFIG_AUTOFS4_FS=y
-CONFIG_ISO9660_FS=y
-CONFIG_JOLIET=y
-CONFIG_ZISOFS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_NFS_V3=y
-CONFIG_NFS_V4=y
-CONFIG_ROOT_NFS=y
-CONFIG_NLS_CODEPAGE_437=y
-CONFIG_NLS_CODEPAGE_850=y
-CONFIG_NLS_ISO8859_1=y
-CONFIG_DEBUG_FS=y
-# CONFIG_CRYPTO_ANSI_CPRNG is not set
-# CONFIG_CRYPTO_HW is not set

board/armadeus/readme.txt

@@ -1,84 +0,0 @@
-Introduction
-============
-
-Armadeus APFxx are Systems On Module (SOM) based on Freescale/NXP i.MX
-processors associated with an FPGA (except on APF28). Non volatile
-data are stored in on-module NOR or NAND Flash, depending on the
-model. These SOM can be used on Armadeus development boards or with
-custom docking boards.
-
-Supported platforms
-===================
-
-Buildroot currently supports the following Armadeus platforms with the
-associated defconfigs:
-
- * APF27 SOM + devt board    -> armadeus_apf27_defconfig
- * APF51 SOM + devt board    -> armadeus_apf51_defconfig
- * APF28 SOM + devt board    -> armadeus_apf28_defconfig
-
-Vanilla Linux versions are preferred to Freescale's one in these
-configurations.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-Let's say you own an APFxx SOM with it's corresponding development
-board, all you have to do is:
-
-  $ make armadeus_apfxx_defconfig
-
-where "apfxx" is the version of your SOM.
-
-Launch build
-------------
-
-  $ make
-
-Result of the build
--------------------
-
-When the build is finished, you will end up with:
-
-    output/images/
-    +-- imx**-apfxxdev.dtb	[1]
-    +-- rootfs.tar
-    +-- rootfs.ubi
-    +-- rootfs.ubifs
-    +-- uImage
-
-[1] Only if the kernel version used uses a Device Tree.
-
-Building U-Boot is currently not supported in these configurations.
-
-Installation
-============
-
-You will require a serial connection to the board and a TFTP server on
-your Host PC. Assuming your server is configured for exporting
-/tftpboot/ directory, you will have to copy the generated images to
-it:
-
-  $ cp output/images/uImage /tftpboot/apfxx-linux.bin
-  $ cp output/images/*.dtb /tftpboot/
-  $ cp output/images/rootfs.ubi /tftpboot/apfxx-rootfs.ubi
-
-where "apfxx" is the version of your SOM, as used with _defconfigs.
-
-Then on your serial terminal, all you have to do is:
-
-* interrupt the boot process and access U-Boot console by pressing any
-  key when booting,
-* configure board and server IP addresses with "ipaddr" and "serverip"
-  environment variables,
-* if you want to update kernel:
-  BIOS > run update_kernel
-* if you want to update device tree:
-  BIOS > run update_dtb
-* if you want to update rootfs:
-  BIOS > run update_rootfs
-
-That's it !

board/asus/tinker/extlinux.conf

@@ -1,4 +0,0 @@
-label Tinker linux-next
-  kernel /boot/uImage
-  devicetree /boot/rk3288-tinker.dtb
-  append console=ttyS2,115200n8 root=/dev/mmcblk0p1 rootwait

board/asus/tinker/genimage.cfg

@@ -1,15 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-spl-dtb {
-		in-partition-table = "no"
-		image = "u-boot-spl-dtb.img"
-		offset = 32K
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/asus/tinker/patches/uboot/0001-include-configs-Increase-CONFIG_SYS_BOOTM_LEN-to-16M.patch

@@ -1,35 +0,0 @@
-From 8ee2b03039cccf64402a72dea2185d7fe1972729 Mon Sep 17 00:00:00 2001
-From: Shyam Saini <shyam.saini@amarulasolutions.com>
-Date: Mon, 15 Apr 2019 16:16:16 +0530
-Subject: [PATCH] include: configs: Increase CONFIG_SYS_BOOTM_LEN to 16MB
-
-The default value of CONFIG_SYS_BOOTM_LEN is 0x800000 i.e, 8MB which
-causes board reset because of larger uImage size.
-
-Error log snippet:
-   Booting using the fdt blob at 0x1f00000
-   Loading Kernel Image ... Image too large: increase CONFIG_SYS_BOOTM_LEN
-Must RESET board to recover
-resetting ...
-
-Signed-off-by: Shyam Saini <shyam.saini@amarulasolutions.com>
----
- include/configs/rk3288_common.h | 2 ++
- 1 file changed, 2 insertions(+)
-
-diff --git a/include/configs/rk3288_common.h b/include/configs/rk3288_common.h
-index 72a54bc0ab..eab7cf4d86 100644
---- a/include/configs/rk3288_common.h
-+++ b/include/configs/rk3288_common.h
-@@ -9,6 +9,8 @@
- #include <asm/arch/hardware.h>
- #include "rockchip-common.h"
- 
-+#define CONFIG_SYS_BOOTM_LEN (16 << 20) /* 16MB */
-+
- #define CONFIG_SKIP_LOWLEVEL_INIT_ONLY
- #define CONFIG_SYS_MALLOC_LEN		(32 << 20)
- #define CONFIG_SYS_CBSIZE		1024
--- 
-2.11.0
-

board/asus/tinker/post-build.sh

@@ -1,9 +0,0 @@
-#!/bin/sh
-
-MKIMAGE=$HOST_DIR/bin/mkimage
-BOARD_DIR="$(dirname $0)"
-
-$MKIMAGE -n rk3288 -T rksd -d $BINARIES_DIR/u-boot-spl-dtb.bin $BINARIES_DIR/u-boot-spl-dtb.img
-cat $BINARIES_DIR/u-boot-dtb.bin >> $BINARIES_DIR/u-boot-spl-dtb.img
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf

board/asus/tinker/readme.txt

@@ -1,37 +0,0 @@
-Tinker RK3288
-=============
-
-Tinker Board is a Single Board Computer (SBC) in an ultra-small form
-factor that offers class-leading performance while leveraging outstanding
-mechanical compatibility.
-
-Tinker link:
-https://www.asus.com/in/Single-Board-Computer/Tinker-Board/
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Tinker+RK3288
-
-How to build it
-===============
-
-  $ make asus_tinker_rk3288_defconfig
-
-Then you can edit the build options using
-
-  $ make menuconfig
-
-Compile all and build rootfs image:
-
-  $ make
-
-Prepare your SDCard
-===================
-
-Buildroot generates a ready-to-use SD card image that you can flash directly to
-the card. The image will be in output/images/sdcard.img.
-You can write this image directly to an SD card device (i.e. /dev/xxx):
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/xxx
-  $ sudo sync
-
-Finally, you can insert the SD card to the Tinker RK3288 board and boot it.

board/atmel/at91sam9260ek/linux-3.9.config

@@ -0,0 +1,98 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_ARCH_AT91SAM9260=y
+CONFIG_ARCH_AT91SAM9260_SAM9XE=y
+CONFIG_MACH_AT91SAM9260EK=y
+CONFIG_MACH_CAM60=y
+CONFIG_MACH_SAM9_L9260=y
+CONFIG_MACH_AFEB9260=y
+CONFIG_MACH_USB_A9260=y
+CONFIG_MACH_QIL_A9260=y
+CONFIG_MACH_CPU9260=y
+CONFIG_MACH_FLEXIBITY=y
+CONFIG_MACH_SNAPPER_9260=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+# CONFIG_ARM_THUMB is not set
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="mem=64M console=ttyS0,115200 initrd=0x21100000,3145728 root=/dev/ram0 rw"
+CONFIG_FPE_NWFPE=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_BOOTP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_LRO is not set
+# CONFIG_IPV6 is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+# CONFIG_INPUT_KEYBOARD is not set
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_SERIO is not set
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+# CONFIG_HW_RANDOM is not set
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_GPIO=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_WATCHDOG_NOWAYOUT=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+# CONFIG_USB_HID is not set
+CONFIG_USB=y
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_MON=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_STORAGE_DEBUG=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_MASS_STORAGE=m
+CONFIG_USB_G_SERIAL=m
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_EXT2_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_CRAMFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_DEBUG_KERNEL=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_LL=y

board/atmel/at91sam9x5ek_mmc/genimage.cfg

@@ -1,39 +0,0 @@
-# Image for SD card boot on Atmel at91sam9x5ek boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91sam9g15ek.dtb",
-			"at91sam9g25ek.dtb",
-			"at91sam9g35ek.dtb",
-			"at91sam9x25ek.dtb",
-			"at91sam9x35ek.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-
-		file uboot.env {
-			image = "uboot-env.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/at91sam9x5ek_mmc/uboot-env.txt

@@ -1,7 +0,0 @@
-bootargs=console=ttyS0,115200 root=/dev/mmcblk0p2 rw rootfstype=ext4 rootwait video=Unknown-1:800x480-16
-bootcmd=fatload mmc 0:1 0x21000000 at91sam9g35ek.dtb; fatload mmc 0:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000
-bootdelay=1
-ethact=gmac0
-stderr=serial
-stdin=serial
-stdout=serial

board/atmel/flasher.sh

@@ -4,10 +4,6 @@ BUILDIR=$1
 TTY=$2
 BOARD=$3
 
-family_at91sam9260ek="at91sam9260ek"
-mach_at91sam9260ek="at91sam9260-ek"
-dtb_at91sam9260ek="at91sam9260ek.dtb"
-
 family_at91sam9g45m10ek="at91sam9m10g45ek"
 mach_at91sam9g45m10ek="at91sam9m10-g45-ek"
 dtb_at91sam9g45m10ek="at91sam9m10g45ek.dtb"
@@ -20,10 +16,6 @@ family_at91sam9g15ek="at91sam9x5ek"
 mach_at91sam9g15ek="at91sam9g15-ek"
 dtb_at91sam9g15ek="at91sam9g15ek.dtb"
 
-family_at91sam9g20ek="at91sam9g20ek"
-mach_at91sam9g20ek="at91sam9g20-ek"
-dtb_at91sam9g20ek="at91sam9g20ek.dtb"
-
 family_at91sam9g25ek="at91sam9x5ek"
 mach_at91sam9g25ek="at91sam9g25-ek"
 dtb_at91sam9g25ek="at91sam9g25ek.dtb"
@@ -98,11 +90,9 @@ Usage:
   $0 <builddir_path> <interface> <board>
 
 Available boards:
-  at91sam9260ek
   at91sam9g45m10ek
   at91sam9rlek
   at91sam9g15ek
-  at91sam9g20ek
   at91sam9g25ek
   at91sam9x25ek
   at91sam9g35ek
@@ -140,6 +130,7 @@ if [[ $BOARD == "*pda4" ]]; then
 	video_mode="video=LVDS-1:480x272-16"
 fi
 
-echo "Executing: ${!F} O=$1/images $1/host/bin/sam-ba $TTY ${!M} $(dirname $0)/nandflash.tcl -- ${!F} ${!D} $video_mode"
+echo "Executing: ${!F} O=$1/images $1/host/opt/sam-ba/sam-ba $TTY ${!M} $(dirname $0)/nandflash.tcl -- ${!F} ${!D} $video_mode"
 export O=$1/images
-$1/host/bin/sam-ba $TTY ${!M} $(dirname $0)/nandflash.tcl -- ${!F} ${!D} $video_mode
+$1/host/opt/sam-ba/sam-ba $TTY ${!M} $(dirname $0)/nandflash.tcl -- ${!F} ${!D} $video_mode
+

board/atmel/readme.txt

@@ -1,6 +1,10 @@
-This document explains how to set up a basic Buildroot system on
-various Atmel/Microchip boards. Additional details can also be found
-on the Linux4SAM website: http://www.linux4sam.org
+Flashing the NAND using SAM-BA
+==============================
+
+This document explains how to flash a basic Buildroot system on various
+Atmel boards. Additional details can
+also be found on the Linux4SAM website, in particular here:
+http://www.at91.com/linux4sam/bin/view/Linux4SAM/GettingStarted
 
 This guide covers the following configurations:
  - at91sam9g45m10ek_defconfig
@@ -10,51 +14,20 @@ This guide covers the following configurations:
  - atmel_sama5d3xek_defconfig (sama5d31, sama5d33, sama5d34, sama5d35,
    sama5d36)
  - atmel_sama5d3_xplained_defconfig
- - atmel_sama5d3_xplained_dev_defconfig
- - atmel_sama5d3_xplained_mmc_defconfig
- - atmel_sama5d3_xplained_mmc_dev_defconfig
+ - atmel_sama5d4ek_defconfig
  - atmel_sama5d4_xplained_defconfig
- - atmel_sama5d4_xplained_dev_defconfig
- - atmel_sama5d4_xplained_mmc_defconfig
- - atmel_sama5d4_xplained_mmc_dev_defconfig
- - atmel_sama5d2_xplained_mmc_defconfig
- - atmel_sama5d2_xplained_mmc_dev_defconfig
- - microchip_sama5d27_wlsom1_ek_mmc_defconfig
- - microchip_sama5d27_wlsom1_ek_mmc_dev_defconfig
 
 These configurations will use AT91Bootstrap, u-boot and a linux kernel from
-the git trees maintained by Atmel.
+the git trees maintained by Atmel. They also build u-boot SPL when
+available, it can replace AT91Bootstrap.
 
-The configurations labeled as 'dev' provide a development rootfs with tools to
-tests the features of the SoC:
-- ALSA tools to test audio
-- FFMPEG to record video from the ISI/ISC
-- I2C, SPI, CAN, etc. tools
-- modetest for LCD screens, HDMI
-- Wilc1000/Wilc3000 firmware for the Atmel Wireless sdio module
-- SSH for convenience
-- GDB/GDB server for debug
 
 Configuring and building Buildroot
-==================================
-
-For the Xplained/Evaluation Kit boards, the Buildroot configuration is
-provided to boot from an SD card. Those configurations are labeled as
-'mmc'. In this case, after building Buildroot, follow the instructions
-in the "Preparing the SD card" section.
-
-For the other configurations listed above, the Buildroot configuration
-assumes the system will be flashed on NAND. In this case, after
-building Buildroot, follow the instructions in the "Flashing the NAND
-using SAM-BA" section below.
-
-To configure and build Buildroot, run:
+----------------------------------
 
   make <board>_defconfig
   make
 
-Flashing the NAND using SAM-BA
-==============================
 
 Flashing the board
 ------------------
@@ -132,44 +105,3 @@ board/atmel/flasher.sh /tmp/atmel_sama5d3_xplained/ /dev/ttyACM0 sama5d3_xplaine
 
 Reboot, the system should boot up to the buildroot login invite.
 
-Preparing the SD card
-=====================
-
-An image named sdcard.img is automatically generated. With this image,
-you no longer have to care about the creation of the partition and
-copying files to the SD card.
-
-You need at least a 1GB SD card. All the data on the SD card will be
-lost. To copy the image on the SD card:
-
-/!\ Caution be sure to do it on the right mmcblk device /!\
-
-dd if=output/images/sdcard.img of=/dev/mmcblk0
-
-Insert your SD card in your Xplained/Evaluation Kit board, and
-enjoy. The default U-Boot environment will load properly the kernel
-and Device Tree blob from the first partition of the SD card, so
-everything works automatically.
-
-By default a 16MB FAT partition is created. It contains at91bootstrap,
-u-boot, the kernel image and all dtb variants for your board. The dtb
-used is the basic one:
-
-U-Boot> print
-[...]
-bootcmd=fatload mmc 1:1 0x21000000 at91-sama5d2_xplained.dtb; fatload mmc 1:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000
-[...]
-
-If you want to use a variant such as the _pda7 one, you will have to
-update your u-boot environment:
-
-U-Boot> setenv bootcmd 'fatload mmc 1:1 0x21000000 at91-sama5d2_xplained_pda7.dtb; fatload mmc 1:1 0x22000000 zImage; bootz 0x22000000 - 0x21000000'
-U-Boot> save
-Saving Environment to FAT...
-writing uboot.env
-done
-
-A 512MB ext4 partition is also created to store the rootfs generated.
-
-If you want to customize the size of the partitions and their content,
-take a look at the the genimage.cfg file in the board directory.

board/atmel/sama5d27_som1_ek_mmc/genimage.cfg

@@ -1,31 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D2 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d27_som1_ek.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d27_wlsom1_ek_mmc/genimage.cfg

@@ -1,31 +0,0 @@
-# Image for SD card boot on Microchip SAMA5D27 WLSOM1 EK
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d27_wlsom1_ek.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d2_xplained_mmc/genimage.cfg

@@ -1,31 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D2 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d2_xplained.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d3_xplained_mmc/genimage.cfg

@@ -1,31 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D3 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d3_xplained.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/sama5d4_xplained_mmc/genimage.cfg

@@ -1,31 +0,0 @@
-# Image for SD card boot on Atmel SAMA5D4 Xplained boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91-sama5d4_xplained.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-		offset = 1M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/xplained/readme.txt

@@ -0,0 +1,73 @@
+Atmel SAMA5D3 Xplained board
+============================
+
+This document explains how to set up a basic Buildroot system on the
+Atmel SAMA5D3 Xplained board, whose main site is
+http://www.atmel.com/tools/ATSAMA5D3-XPLD.aspx. Additional details can
+also be found on the http://www.at91.com/linux4sam/bin/view/Linux4SAM/
+web site.
+
+Note that the default Buildroot configuration is prepared to boot from
+an SD card: the first stage bootloader, second stage bootloader,
+kernel image and root filesystem are all located on the SD card. Some
+adjustments in the bootloader configuration will be needed to boot
+from NAND flash, see board/atmel/nandflash.txt
+
+Configuring and building Buildroot
+----------------------------------
+
+  make atmel_sama5d3_xplained_mmc_defconfig
+  make
+
+Preparing the SD card
+---------------------
+
+The SD card must be partitioned with at least two partitions: one
+FAT16 partition for the bootloaders, kernel image and Device Tree
+blob, and one ext4 partition for the root filesystem. To partition the
+SD card:
+
+sudo sfdisk -uM /dev/mmcblk0 <<EOF
+,64,6
+;
+EOF
+
+This creates a 64 MB partition for the FAT16 filesystem (type 6) and
+uses the rest for the ext4 filesystem used for the root filesystem.
+
+Then, format both partitions:
+
+sudo mkfs.msdos -n boot /dev/mmcblk0p1
+sudo mkfs.ext4 -L rootfs -O ^huge_file /dev/mmcblk0p2
+
+ Note: the -O ^huge_file option is needed to avoid enabling the huge
+ files features of ext4 (to support files larges than 2 TB), which
+ needs the kernel option CONFIG_LBDAF to be enabled.
+
+Mount both partitions (if not done automatically by your system):
+
+sudo mount /dev/mmcblk0p1 /media/boot
+sudo mount /dev/mmcblk0p2 /media/rootfs
+
+Copy the bootloaders, kernel image and Device Tree blob to the first
+partition:
+
+cp output/images/uboot-spl.bin /media/boot/boot.bin
+cp output/images/u-boot.img /media/boot/u-boot.img
+cp output/images/zImage /media/boot/zImage
+cp output/images/at91-sama5d3_xplained.dtb /media/boot/at91-sama5d3_xplained.dtb
+
+Extract the root filesystem to the second partition:
+
+sudo tar -C /media/rootfs -xf output/images/rootfs.tar
+
+Unmount both partitions:
+
+sudo umount /media/boot
+sudo umount /media/rootfs
+
+Insert your SD card in your Xplained board, and enjoy. The default
+U-Boot environment will properly load the kernel and Device Tree blob
+from the first partition of the SD card, so everything works
+automatically.
+

board/avnet/microzed/readme.txt

@@ -0,0 +1,68 @@
+This is the buildroot board support for the Avnet Microzed. The Microzed is
+a development board based on the Xilinx Zynq-7000 based All-Programmable
+System-On-Chip.
+
+Microzed information including schematics, reference designs, and manuals are
+available from http://www.zedboard.org .
+
+Steps to create a working system for Microzed:
+
+1) make microzed_defconfig
+2) make
+3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot,
+	uImage, zynq-zed.dtb into your SD card
+4) boot your Microzed
+
+The expected output:
+
+ U-Boot SPL 2015.07 (Sep 15 2015 - 16:10:56)
+ mmc boot
+ reading system.dtb
+ spl_load_image_fat_os: error reading image system.dtb, err - -1
+ reading u-boot-dtb.img
+ reading u-boot-dtb.img
+
+
+ U-Boot 2015.07 (Sep 15 2015 - 16:10:56 +0200)
+
+ Model: Zynq MicroZED Board
+ I2C:   ready
+ DRAM:  ECC disabled 1 GiB
+ MMC:   zynq_sdhci: 0
+ Using default environment
+ ...
+
+When using an older U-Boot then 2015.07, a working ps7_init.c
+file is required to be installed into the U-Boot directory
+structure. From 2015.07, the major Zynq-based boards are
+supported without any manual intervention.
+
+Resulting system
+----------------
+A FAT32 partition should be created at the beginning of the SD Card
+and the following files should be installed:
+	/BOOT.BIN
+	/zynq-zed.dtb
+	/uImage
+	/rootfs-cpio.uboot
+	/u-boot-dtb.img
+
+All needed files can be taken from output/images/
+
+BOOT.BIN, uImage and u-boot-dtb.img are direct copies of the same files
+available on output/images/.
+
+Note th at the DTB (zynq-zed.dtb) is the same as the one used for the
+Zedboard, and that this is the recommended solution, see
+https://forums.xilinx.com/t5/Embedded-Linux/Microzed-default-device-tree-dts/td-p/432856.
+
+There is a patch attached that redefines the U-Boot's environment
+to work with Buildroot out-of-the-box.
+
+You can alter the booting procedure by creating a file uEnv.txt
+in the root of the SD card. It is a plain text file in format
+<key>=<value> one per line:
+
+kernel_image=myimage
+modeboot=myboot
+myboot=...

board/avnet/microzed/uboot/0001-zynq-Create-microzed-specific-U-Boot-environment.patch

@@ -0,0 +1,41 @@
+From a4c0058967a551385da5e16d2787d9f704cab225 Mon Sep 17 00:00:00 2001
+From: Jan Viktorin <viktorin@rehivetech.com>
+Date: Thu, 18 Jun 2015 16:26:02 +0200
+Subject: [PATCH] zynq: Create microzed-specific U-Boot environment
+
+This is a copy of the patch supplied for Zedboard.
+
+Signed-off-by: Davide Viti <d.viti@infosolution.it>
+
+--- a/include/configs/zynq_microzed.h	2015-07-14 19:32:21.000000000 +0200
++++ b/include/configs/zynq_microzed.h	2015-09-02 12:19:35.728503472 +0200
+@@ -22,4 +22,29 @@
+ 
+ #include <configs/zynq-common.h>
+ 
++#undef CONFIG_EXTRA_ENV_SETTINGS
++#define CONFIG_EXTRA_ENV_SETTINGS \
++	"envload=mmc info && if fatload mmc 0 0x1000 uEnv.txt;"\
++	" then echo Importing uEnv.txt; env import -t 0x1000"  \
++	" $filesize; fi;\0"                                    \
++	"bootcmd=run $modeboot\0"                              \
++	"modeboot=sdboot\0"                                    \
++	"baudrate=115200\0"                                    \
++	"bootenv=uEnv.txt\0"                                   \
++	"devicetree_image=zynq-zed.dtb\0"                      \
++	"kernel_image=uImage\0"                                \
++	"ramdisk_image=rootfs.cpio.uboot\0"                    \
++	"fpga_image=system.bit\0"                              \
++	"sdboot=echo Booting from SD...;"                      \
++	" run envload; run fpgaboot;"                          \
++	" fatload mmc 0 0x1000000 ${kernel_image}"             \
++	" && fatload mmc 0 0x2000000 ${ramdisk_image}"         \
++	" && fatload mmc 0 0x3000000 ${devicetree_image}"      \
++	" && bootm 0x1000000 0x2000000 0x3000000\0"            \
++	"fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image};"   \
++	" then echo Booting FPGA from ${fpga_image};"          \
++	" fpga info 0 && fpga loadb 0 0x1000000 $filesize;"    \
++	" else echo FPGA image ${fpga_image} was not found,"   \
++	" skipping...; fi;\0"
++
+ #endif /* __CONFIG_ZYNQ_MICROZED_H */

board/avnet/zedboard/readme.txt

@@ -0,0 +1,64 @@
+This is the buildroot board support for the Avnet Zedboard. The Zedboard is
+a development board based on the Xilinx Zynq-7000 based All-Programmable
+System-On-Chip.
+
+Zedboard information including schematics, reference designs, and manuals are
+available from http://www.zedboard.org .
+
+Steps to create a working system for Zedboard:
+
+1) make zedboard_defconfig
+2) make
+3) copy files BOOT.BIN, u-boot-dtb.img, rootfs.cpio.uboot,
+	uImage, zynq-zed.dtb into your SD card
+4) boot your Zedboard
+
+The expected output:
+
+ U-Boot SPL 2015.07 (Jul 22 2015 - 12:01:55)
+ mmc boot
+ reading system.dtb
+ spl_load_image_fat_os: error reading image system.dtb, err - -1
+ reading u-boot-dtb.img
+ reading u-boot-dtb.img
+
+ U-Boot 2015.07 (Jul 22 2015 - 12:01:55 +0200)
+
+ Model: Zynq ZED Board
+ I2C:   ready
+ DRAM:  ECC disabled 512 MiB
+ MMC:   zynq_sdhci: 0
+ Using default environment
+ ...
+
+When using an older U-Boot then 2015.07, a working ps7_init.c
+file is required to be installed into the U-Boot directory
+structure. From 2015.07, the major Zynq-based boards are
+supported without any manual intervention.
+
+Resulting system
+----------------
+A FAT32 partition should be created at the beginning of the SD Card
+and the following files should be installed:
+	/BOOT.BIN
+	/zynq-zed.dtb
+	/uImage
+	/rootfs-cpio.uboot
+	/u-boot-dtb.img
+
+
+All needed files can be taken from output/images/
+
+BOOT.BIN, uImage and u-boot-dtb.img are direct copies of the same files
+available on output/images/
+
+There is a patch attached that redefines the U-Boot's environment
+to work with Buildroot out-of-the-box.
+
+You can alter the booting procedure by creating a file uEnv.txt
+in the root of the SD card. It is a plain text file in format
+<key>=<value> one per line:
+
+kernel_image=myimage
+modeboot=myboot
+myboot=...

board/avnet/zedboard/uboot/0001-zynq-Create-zedboard-specific-U-Boot-environment.patch

@@ -0,0 +1,45 @@
+From a4c0058967a551385da5e16d2787d9f704cab225 Mon Sep 17 00:00:00 2001
+From: Jan Viktorin <viktorin@rehivetech.com>
+Date: Thu, 18 Jun 2015 16:26:02 +0200
+Subject: [PATCH 2/2] zynq: Create zedboard-specific U-Boot environment
+
+---
+ include/configs/zynq_zed.h | 25 +++++++++++++++++++++++++
+ 1 file changed, 25 insertions(+)
+
+diff --git a/include/configs/zynq_zed.h b/include/configs/zynq_zed.h
+index 946de95..2400a88 100644
+--- a/include/configs/zynq_zed.h
++++ b/include/configs/zynq_zed.h
+@@ -24,4 +24,28 @@
+
+ #include <configs/zynq-common.h>
+
++#undef CONFIG_EXTRA_ENV_SETTINGS
++#define CONFIG_EXTRA_ENV_SETTINGS \
++	"envload=mmc info && if fatload mmc 0 0x1000 uEnv.txt;"\
++	" then echo Importing uEnv.txt; env import -t 0x1000"  \
++	" $filesize; fi;\0"                                    \
++	"bootcmd=run envload; run $modeboot\0"                 \
++	"modeboot=sdboot\0"                                    \
++	"baudrate=115200\0"                                    \
++	"bootenv=uEnv.txt\0"                                   \
++	"devicetree_image=zynq-zed.dtb\0"                      \
++	"kernel_image=uImage\0"                                \
++	"ramdisk_image=rootfs.cpio.uboot\0"                    \
++	"fpga_image=system.bit\0"                              \
++	"sdboot=echo Booting from SD...; run fpgaboot;"        \
++	" fatload mmc 0 0x1000000 ${kernel_image}"             \
++	" && fatload mmc 0 0x2000000 ${ramdisk_image}"         \
++	" && fatload mmc 0 0x3000000 ${devicetree_image}"      \
++	" && bootm 0x1000000 0x2000000 0x3000000\0"            \
++	"fpgaboot=if fatload mmc 0 0x1000000 ${fpga_image};"   \
++	" then echo Booting FPGA from ${fpga_image};"          \
++	" fpga info 0 && fpga loadb 0 0x1000000 $filesize;"    \
++	" else echo FPGA image ${fpga_image} was not found,"   \
++	" skipping...; fi;\0"
++
+ #endif /* __CONFIG_ZYNQ_ZED_H */
+--
+2.4.3
+

board/bananapi/bananapi-m1/boot.cmd

@@ -1,7 +0,0 @@
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-mmc dev 0
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-bananapi.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r

board/bananapi/bananapi-m1/genimage.cfg

@@ -1,33 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-bananapi.dtb",
-			"boot.scr"
-		}
-	}
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}

board/bananapi/bananapi-m1/readme.txt

@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Bananapi M1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Bananapi M1 link:
-http://www.banana-pi.org/m1.html
-
-Wiki link:
-https://openedev.amarulasolutions.com/display/ODWIKI/Bananapi+M1
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make bananapi_m1_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Bananapi M1 and power it up. The console
-is on the serial line, 115200 8N1.