Fix the folloing build failure with protobuf (enabled since commit
31c68a449e) and gcc 5.3.0:
[ 53%] Building CXX object modules/dnn/CMakeFiles/opencv_dnn.dir/opencv-caffe.pb.cc.o
In file included from /home/peko/autobuild/instance-1/output-1/per-package/opencv3/host/opt/ext-toolchain/mips64el-buildroot-linux-uclibc/include/c++/5.5.0/atomic:38:0,
from /home/peko/autobuild/instance-1/output-1/per-package/opencv3/host/mips64el-buildroot-linux-uclibc/sysroot/usr/include/google/protobuf/io/coded_stream.h:115,
from /home/peko/autobuild/instance-1/output-1/build/opencv3-3.4.12/buildroot-build/modules/dnn/opencv-caffe.pb.h:23,
from /home/peko/autobuild/instance-1/output-1/build/opencv3-3.4.12/buildroot-build/modules/dnn/opencv-caffe.pb.cc:4:
/home/peko/autobuild/instance-1/output-1/per-package/opencv3/host/opt/ext-toolchain/mips64el-buildroot-linux-uclibc/include/c++/5.5.0/bits/c++0x_warning.h:32:2: error: #error This file requires compiler and library support for the ISO C++ 2011 standard. This support must be enabled with the -std=c++11 or -std=gnu++11 compiler options.
#error This file requires compiler and library support \
^
Fixes:
- http://autobuild.buildroot.org/results/7caf175af039054a032b8f63b458b3940d9ec0f3
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit bf96f4e8d3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OpenCV-3's buildsystem will try to detect ccache and use it if
available. This may yield a system-installed ccache.
However, in Buildroot, ccache is entirely hidden away and handled in the
toolchain wrapper.
Forcibly disable detection of ccache.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Cc: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 505e7f4771)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In buildroot, stripping for the target is configured and implemented
with the global `BR2_STRIP_strip` option that drive the stripping in
the target-finalize step.
So, we explicitly disable stripping at build time for the target
variants.
For the host variants, however, we don't much care about symbols and
stuff, but smaller executables will hopefully load faster than bigger
ones (disputable, given that sections in ELF files are paged-in
on-demand), so we explictly enable stripping.
Signed-off-by: Gleb Mazovetskiy <glex.spb@gmail.com>
[yann.morin.1998@free.fr:
- add burb about the target-finalize step
- enable stripping for host variants
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3f39f902b3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-25692: A NULL pointer dereference was found in OpenLDAP server
and was fixed in openldap 2.4.55, during a request for renaming RDNs. An
unauthenticated attacker could remotely crash the slapd process by sending
a specially crafted request, causing a Denial of Service.
- CVE-2020-25709: Assertion failure in CSN normalization with invalid input
- CVE-2020-25710: Assertion failure in CSN normalization with invalid input
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Peter: add CVE info]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 09a565d940)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-8277: Denial of Service through DNS request (High). A Node.js
application that allows an attacker to trigger a DNS request for a host of
their choice could trigger a Denial of Service by getting the application
to resolve a DNS record with a larger number of responses.
https://nodejs.org/en/blog/release/v12.19.1/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f359580796)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will avoid the following build failure with xtensa:
[ 62%] Linking CXX executable ../../guids_test
[ 62%] Building CXX object retrace/CMakeFiles/retrace_common.dir/retrace.cpp.o
CMakeFiles/guids_test.dir/guids_test.cpp.o:(.debug_line+0xf7b): dangerous relocation: overflow after relaxation
collect2: error: ld returned 1 exit status
lib/guids/CMakeFiles/guids_test.dir/build.make:85: recipe for target 'guids_test' failed
Fixes:
- http://autobuild.buildroot.org/results/8fea93a88bb34e98e391a048c3b996b45ebac803
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 0d209dce35)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In a Linux system without IPv6 support (or booted with "ipv6.disable=1")
file /proc/net/snmp6 is not present. If such file is not present an allocated
memory is not freed. Memory leak occurs even without snmp queries.
Problem seen at least since netsnmp 5.7.3 (probably even v5.6.1).
Patch backported from netsnmp 5.9, where the problem does not appear any more.
Signed-off-by: Adam Wujek <dev_public@wujek.eu>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 5e6f6e0745)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Mutt before 2.0.2 and NeoMutt before 2020-11-20 did not ensure that
$ssl_force_tls was processed if an IMAP server's initial server response
was invalid. The connection was not properly closed, and the code could
continue attempting to authenticate. This could result in authentication
credentials being exposed on an unencrypted connection, or to a
machine-in-the-middle.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 89a9f74fa8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
BR2_PACKAGE_QT5BASE_OPENSSL was dropped by commit 4be1f9b9873
(package/qt5enginio: drop qt 5.6 support), but python-pyqt5 not updated to
match. Fix that.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 54854dc44e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-29599: ImageMagick before 6.9.11-40 and 7.x before
7.0.10-40 mishandles the -authenticate option, which allows setting a
password for password-protected PDF files. The user-controlled password
was not properly escaped/sanitized and it was therefore possible to
inject additional shell commands via coders/pdf.c.
- Update license hash (correct wording to match Apache 2 license:
45e5d2493c)
https://github.com/ImageMagick/ImageMagick/blob/7.0.10-51/ChangeLog
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit b898e80639)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2019-14318: Crypto++ 8.2.0 and earlier contains a timing side
channel in ECDSA signature generation. This allows a local or remote
attacker, able to measure the duration of hundreds to thousands of
signing operations, to compute the private key used. The issue occurs
because scalar multiplication in ecp.cpp (prime field curves, small
leakage) and algebra.cpp (binary field curves, large leakage) is not
constant time and leaks the bit length of the scalar among other
information. For details, see:
https://github.com/weidai11/cryptopp/issues/869
- Update license hash due to the addition of ARM SHA1 and SHA256 asm
implementation from Cryptogams
1a63112faf4c9ca6b723https://www.cryptopp.com/release830.html
[Peter: adjust CVE info, issue is fixes in 8.3.0]
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e7c789d48f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-ncurses install step attempts to run ldconfig, causing a permission
failure:
cd /buildroot/output/host/lib && (ln -s -f libncurses.so.6.0 libncurses.so.6; ln -s -f libncurses.so.6 libncurses.so; )
test -z "" && /sbin/ldconfig
/sbin/ldconfig: Can't create temporary cache file /etc/ld.so.cache~: Permission denied
make[3]: [/buildroot/output/host/lib/libncurses.so.6.0] Error 1 (ignored)
The error is non-fatal and ignored, but confusing.
The ncurses makefiles already avoid calling ldconfig when DESTDIR is set
(target case) but for host-ncurses DESTDIR is empty and the output/host path
is passed via --prefix.
Pass an empty ac_cv_path_LDCONFIG to the configure step, so than ldconfig is
not called.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 389f48fe90)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The 'opkg.py' script installed by host-opkg-utils has as shebang:
#!/usr/bin/env python3
which may not be available on all host machines.
Add a potential dependency on host-python3 via BR2_PYTHON3_HOST_DEPENDENCY,
which will only add the host-python3 dependency if no python3 is already
available on the host.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7dcd20f9d5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When BR2_PER_PACKAGE_DIRECTORIES=y, $(TARGET_DIR) is evaluated as
$(BASE_DIR)/target, but $$(TARGET_DIR) is evaluated as
$(BASE_DIR)/per-package/$(PKG)_NAME/target.
Signed-off-by: Tian Yuanhao <tianyuanhao@aliyun.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 8d595c0d92)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Starting with CMake 3.4 CMake supports setting a compiler launcher
like ccache. The feature is described in
https://cmake.org/cmake/help/latest/variable/CMAKE_LANG_COMPILER_LAUNCHER.html
This should be safe since everything is built for the host using make or ninja.
The use of *_ARG1 is discouraged by the cmake developers
https://cmake-developers.cmake.narkive.com/OTa9EKfj/cmake-c-compiler-arg-not-documented .
Without this patch I get the following error message with CMake 3.19.1 on Arch Linux.
Disabling BR2_CCACHE also resolves the issue.
/usr/bin/cmake [~]/buildroot/build/host-lzo-2.10/ -DCMAKE_INSTALL_SO_NO_EXE=0 -DCMAKE_FIND_ROOT_PATH="[...]" -DCMAKE_FIND_ROOT_PATH_MODE_PROGRAM="BOTH" -DCMAKE_FIND_ROOT_P
ATH_MODE_LIBRARY="BOTH" -DCMAKE_FIND_ROOT_PATH_MODE_INCLUDE="BOTH" -DCMAKE_INSTALL_PREFIX="[...]" -DCMAKE_C_FLAGS="-O2 -I[...]/include" -DCMAKE_CXX_FLAGS="-O2 -I[...]/include" -DCMAKE_EXE_LINKER_FLAGS="-L[...]/lib -Wl,-rpath,[...]/lib" -DCMAKE_SHARED_LINKER_FLAGS="-L[...]/l
ib -Wl,-rpath,[...]/lib" -DCMAKE_ASM_COMPILER="/usr/bin/as" -DCMAKE_C_COMPILER="[...]/bin/ccache" -DCMAKE_CXX_COMPILER="[...]/bin/ccache"
-DCMAKE_C_COMPILER_ARG1="/usr/bin/gcc" -DCMAKE_CXX_COMPILER_ARG1="/usr/bin/g++" -DCMAKE_COLOR_MAKEFILE=OFF -DBUILD_DOC=OFF -DBUILD_DOCS=OFF -DBUILD_EXAMPLE=OFF -DBUILD_EXAMPLES=OFF -DBUILD_TEST=OFF -DBUILD_TESTS=OFF -DBUILD_TESTING=O
FF -DENABLE_SHARED=ON -DENABLE_STATIC=OFF )
-- The C compiler identification is unknown
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - failed
-- Check for working C compiler: [...]/bin/ccache
-- Check for working C compiler: [...]/bin/ccache - broken
CMake Error at /usr/share/cmake-3.19/Modules/CMakeTestCCompiler.cmake:66 (message):
The C compiler
Signed-off-by: Bernd Amend <bernd.amend@gmail.com>
Reviewed-by: Yegor Yefremov <yegorslists@googlemail.com>
Tested-by: Christian Stewart <christian@paral.in>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0e310b4fd0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
TF-A supports stack smashing protection (-fstack-protector-*).
However, that feature is currently silently disabled because
ENABLE_STACK_PROTECTOR is not set during build time.
As documented in the TF-A user guide, the flag ENABLE_STACK_PROTECTOR
is required to enable stack protection support. When enabled the symbols
for the stack protector (e.g. __stack_chk_guard) are built.
This needs to be done because TF-A does not link against an external
library that provides that symbols (e.g. libc).
So in case we see that BR2_SSP_* is enabled, let's enable the corresponding
ENABLE_STACK_PROTECTOR build flag for TF-A as documented in the TF-A user guide.
This patch also fixes a the following linker errors with older TF-A versions
if BR2_SSP_* is enabled (i.e. -fstack-protector-* is used as compiler flag)
and ENABLE_STACK_PROTECTOR is not set, which are caused by the missing
stack protector symbols:
[...]
params_setup.c:(.text.params_early_setup+0xc): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x14): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x104): undefined reference to `__stack_chk_guard'
aarch64-none-linux-gnu-ld: params_setup.c:(.text.params_early_setup+0x118): undefined reference to `__stack_chk_fail'
aarch64-none-linux-gnu-ld: ./build/px30/release/bl31/pmu.o: in function `rockchip_soc_sys_pwr_dm_suspend':
pmu.c:(.text.rockchip_soc_sys_pwr_dm_suspend+0xc): undefined reference to `__stack_chk_guard'
[...]
TF-A releases after Nov 2019, that include 7af195e29a4, will circumvent
these issue by explicitliy and silently disabling the stack protector
by appending '-fno-stack-protector' to the compiler flags in case
ENABLE_STACK_PROTECTOR is not set.
Tested on a Rockchip PX30 based system (TF-A v2.2 and upstream/master).
Signed-off-by: Christoph Müllner <christoph.muellner@theobroma-systems.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 7b3fcbcdaa)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Patch '0001-fix-compile-time-atomic-detection.patch' claims to be Merged but
this is not true. The linked issue is closed with 'Needs information', and
the code itself is effectively not merged.
Clarify the 'Upstream-status' line to make this more clear.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 43021dfb77)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* 4.6.2: A vulnerability (CVE-2020-27783) was discovered in the HTML Cleaner
by Yaniv Nizry, which allowed JavaScript to pass through. The cleaner now
removes more sneaky "style" content.
* 4.6.1: A vulnerability was discovered in the HTML Cleaner by Yaniv Nizry,
which allowed JavaScript to pass through. The cleaner now removes more
sneaky "style" content.
For more details, see the changes file:
https://github.com/lxml/lxml/blob/lxml-4.6.2/CHANGES.txt
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ea41a5faab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-27207: Zetetic SQLCipher 4.x before 4.4.1 has a
use-after-free, related to sqlcipher_codec_pragma and sqlite3Strlen30 in
sqlite3.c. A remote denial of service attack can be performed. For
example, a SQL injection can be used to execute the crafted SQL command
sequence. After that, some unexpected RAM data is read.
https://www.zetetic.net/blog/2020/11/25/sqlcipher-442-release
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f38893f8dd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The old git tree is unreachable now, switch to using the new one.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c7bd3805bd)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Weston does not work with the ti-sgx SDK, so switch to using the
KMS-based demos.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split off into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 29ff603f08)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
weston does not work on the ti-sgx SDK, so switch to using KMS directly,
and drop the wayland-related config options.
Signed-off-by: Adam Duskett <Aduskett@gmail.com>
[yann.morin.1998@free.fr: split into its own patch]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 8efc5dce98)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
scan.c in x11vnc 0.9.16 uses IPC_CREAT|0777 in shmget calls, which
allows access by actors other than the current user.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3b6a105af8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-15257: Access controls for the shim’s API socket verified that
the connecting process had an effective UID of 0, but did not otherwise
restrict access to the abstract Unix domain socket. This would allow
malicious containers running in the same network namespace as the shim,
with an effective UID of 0 but otherwise reduced privileges, to cause new
processes to be run with elevated privileges.
For more details, see the advisory:
https://github.com/containerd/containerd/security/advisories/GHSA-36xw-fx78-c5r4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1e1d1278c7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
* CVE-2020-14360 / ZDI CAN 11572 XkbSetMap Out-Of-Bounds Access
Insufficient checks on the lengths of the XkbSetMap request can lead to
out of bounds memory accesses in the X server.
* CVE-2020-25712 / ZDI-CAN-11839 XkbSetDeviceInfo Heap-based Buffer Overflow
Insufficient checks on input of the XkbSetDeviceInfo request can lead to a
buffer overflow on the head in the X server.
For more details, see the advisory:
https://www.openwall.com/lists/oss-security/2020/12/01/3
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c773336463)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
From the release notes:
- Security/Reliability:
- Fixed memory leaks when a response is buffered and the buffer
limit is reached or Privoxy is running out of memory.
Commits bbd53f1010b and 4490d451f9b. OVE-20201118-0001.
Sponsored by: Robert Klemme
- Fixed a memory leak in the show-status CGI handler when
no action files are configured. Commit c62254a686.
OVE-20201118-0002.
Sponsored by: Robert Klemme
- Fixed a memory leak in the show-status CGI handler when
no filter files are configured. Commit 1b1370f7a8a.
OVE-20201118-0003.
Sponsored by: Robert Klemme
- Fixes a memory leak when client tags are active.
Commit 245e1cf32. OVE-20201118-0004.
Sponsored by: Robert Klemme
- Fixed a memory leak if multiple filters are executed
and the last one is skipped due to a pcre error.
Commit 5cfb7bc8fe. OVE-20201118-0005.
- Prevent an unlikely dereference of a NULL-pointer that
could result in a crash if accept-intercepted-requests
was enabled, Privoxy failed to get the request destination
from the Host header and a memory allocation failed.
Commit 7530132349. CID 267165. OVE-20201118-0006.
- Fixed memory leaks in the client-tags CGI handler when
client tags are configured and memory allocations fail.
Commit cf5640eb2a. CID 267168. OVE-20201118-0007.
- Fixed memory leaks in the show-status CGI handler when memory
allocations fail. Commit 064eac5fd0 and commit fdee85c0bf3.
CID 305233. OVE-20201118-0008.
For more details, see the announcement:
https://www.openwall.com/lists/oss-security/2020/11/29/1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9ef54b7d0b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2020-15180: during SST a joiner sends an sst method name to the donor.
Donor then appends it to the "wsrep_sst_" string to get the name of the
sst script to use, e.g. wsrep_sst_rsync. There is no validation or
filtering here, so if the malicious joiner sends, for example, "rsync `rm
-rf /`" the donor will execute that too.
- CVE-2020-14812: Vulnerability in the MySQL Server product of Oracle MySQL
(component: Server: Locking). Supported versions that are affected are
5.6.49 and prior, 5.7.31 and prior and 8.0.21 and prior. Easily
exploitable vulnerability allows high privileged attacker with network
access via multiple protocols to compromise MySQL Server. Successful
attacks of this vulnerability can result in unauthorized ability to cause
a hang or frequently repeatable crash (complete DOS) of MySQL Server.
- CVE-2020-14765: Vulnerability in the MySQL Server product of Oracle MySQL
(component: Server: FTS). Supported versions that are affected are 5.6.49
and prior, 5.7.31 and prior and 8.0.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
- CVE-2020-14776: Vulnerability in the MySQL Server product of Oracle MySQL
(component: InnoDB). Supported versions that are affected are 5.7.31 and
prior and 8.0.21 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to
compromise MySQL Server. Successful attacks of this vulnerability can
result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.
- CVE-2020-14789: Vulnerability in the MySQL Server product of Oracle MySQL
(component: Server: FTS). Supported versions that are affected are 5.7.31
and prior and 8.0.21 and prior. Easily exploitable vulnerability allows
high privileged attacker with network access via multiple protocols to
compromise MySQL Server. Successful attacks of this vulnerability can
result in unauthorized ability to cause a hang or frequently repeatable
crash (complete DOS) of MySQL Server.
- CVE-2020-28912:
https://www.usenix.org/system/files/conference/usenixsecurity18/sec18-bui.pdf
describes a named pipe privilege vulnerability, specifically for MySQL,
where an unprivileged user, located on the same machine as the server, can
act as man-in-the-middle between server and client.
Additionally, 10.3.27 fixes a regression added in 10.3.26.
Drop weak md5/sha1 checksums.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 163334a707)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
1.3.6e
---------
+ Fixed null pointer deference in mod_sftp when using SCP incorrectly
(Issue #1043).
1.3.6d
---------
+ Fixed issue with FTPS uploads of large files using TLSv1.3 (Issue #959).
1.3.6c
---------
+ Fixed regression in directory listing latency (Issue #863).
+ Detect OpenSSH-specific formatted SFTPHostKeys, and log hint for
converting them to supported format.
+ Fixed use-after-free vulnerability during data transfers (Issue #903)
[CVE-2020-9273]
+ Fixed out-of-bounds read in mod_cap by updating the bundled libcap
(Issue #902) [CVE-2020-9272]
http://proftpd.org/docs/RELEASE_NOTES-1.3.6e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Peter: mark as security bump, add CVEs]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7ba4aa9298)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While processing ARP/NCSI packets in 'arp_input' or 'ncsi_input'
routines, ensure that pkt_len is large enough to accommodate the
respective protocol headers, lest it should do an OOB access.
Add check to avoid it.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 282fc60ed4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes#13341
The -x / --exec start-stop-daemon option expects the path to the executable,
not just the name, leading to errors when running the init script:
Starting vsftpd: start-stop-daemon: unable to stat //vsftpd (No such file or directory)
Reported-by: tochansky@tochlab.net
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 405f76425d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add upstream patch [1] to fix (musl) time_t related compile failure.
Fixes:
- https://bugs.busybox.net/show_bug.cgi?id=13336
src/thd_trip_point.cpp: In member function ‘bool cthd_trip_point::thd_trip_point_check(int, unsigned int, int, bool*)’:
src/thd_trip_point.cpp:250:19: error: format ‘%ld’ expects argument of type ‘long int’, but argument 6 has type ‘time_t’ {aka ‘long long int’} [-Werror=format=]
250 | thd_log_info("Too early to act zone:%d index %d tm %ld\n",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
251 | zone_id, cdev->thd_cdev_get_index(),
252 | tm - cdevs[i].last_op_time);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~
| |
| time_t {aka long long int}
src/thermald.h:82:57: note: in definition of macro ‘thd_log_info’
82 | #define thd_log_info(...) g_log(NULL, G_LOG_LEVEL_INFO, __VA_ARGS__)
| ^~~~~~~~~~~
src/thd_trip_point.cpp:250:59: note: format string is defined here
250 | thd_log_info("Too early to act zone:%d index %d tm %ld\n",
| ~~^
| |
| long int
| %lld
[1] a7136682b9.patch
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1672e25010)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop dependency on BR2_ENABLE_LOCALE, which was marked as a dependency
of wlroots, but wlroots does not depend on it anymore.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 210e9b7b24)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop dependency on BR2_ENABLE_LOCALE, which was marked as a dependency of
libinput which is selected by wlroots. However, libinput does not depend on
BR2_ENABLE_LOCALE since commit bef6b92b67 (package/libinput: remove
dependency on BR2_ENABLE_LOCALE).
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ae9d6fc6f4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
xinetd does not enforce the user and group configuration directives for
TCPMUX services, which causes these services to be run as root and makes it
easier for remote attackers to gain privileges by leveraging another
vulnerability in a service.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d5abf5ff61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Without hashlib module pip returns the following errors:
# pip
ValueError: unsupported hash type sha224
ERROR:root:code for hash sha256 was not found.
Traceback (most recent call last):
File "/usr/lib/python2.7/hashlib.py", line 147, in <module>
File "/usr/lib/python2.7/hashlib.py", line 97, in __get_builtin_constructor
ValueError: unsupported hash type sha256
ERROR:root:code for hash sha384 was not found.
Traceback (most recent call last):
File "/usr/lib/python2.7/hashlib.py", line 147, in <module>
File "/usr/lib/python2.7/hashlib.py", line 97, in __get_builtin_constructor
ValueError: unsupported hash type sha384
ERROR:root:code for hash sha512 was not found.
Traceback (most recent call last):
File "/usr/lib/python2.7/hashlib.py", line 147, in <module>
File "/usr/lib/python2.7/hashlib.py", line 97, in __get_builtin_constructor
ValueError: unsupported hash type sha512
Traceback (most recent call last):
File "/usr/bin/pip", line 11, in <module>
load_entry_point('pip==20.0.2', 'console_scripts', 'pip')()
File "/usr/lib/python2.7/site-packages/pip/_internal/cli/main.py", line 73, in main
File "/usr/lib/python2.7/site-packages/pip/_internal/commands/__init__.py", line 96, in create_command
File "/usr/lib/python2.7/importlib/__init__.py", line 37, in import_module
File "/usr/lib/python2.7/site-packages/pip/_internal/commands/install.py", line 24, in <module>
File "/usr/lib/python2.7/site-packages/pip/_internal/cli/req_command.py", line 15, in <module>
File "/usr/lib/python2.7/site-packages/pip/_internal/index/package_finder.py", line 21, in <module>
File "/usr/lib/python2.7/site-packages/pip/_internal/index/collector.py", line 12, in <module>
File "/usr/lib/python2.7/site-packages/pip/_vendor/requests/__init__.py", line 43, in <module>
File "/usr/lib/python2.7/site-packages/pip/_vendor/urllib3/__init__.py", line 7, in <module>
File "/usr/lib/python2.7/site-packages/pip/_vendor/urllib3/connectionpool.py", line 29, in <module>
File "/usr/lib/python2.7/site-packages/pip/_vendor/urllib3/connection.py", line 40, in <module>
File "/usr/lib/python2.7/site-packages/pip/_vendor/urllib3/util/__init__.py", line 7, in <module>
File "/usr/lib/python2.7/site-packages/pip/_vendor/urllib3/util/ssl_.py", line 8, in <module>
ImportError: cannot import name md5
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d5e3e1144e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the NVE data, these are fixes in the 20191012 patch - So mark
them as such.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit f7fc4bf1b9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2020-28196: MIT Kerberos 5 (aka krb5) before 1.17.2 and 1.18.x before
1.18.3 allows unbounded recursion via an ASN.1-encoded Kerberos message
because the lib/krb5/asn.1/asn1_encode.c support for BER indefinite
lengths lacks a recursion limit.
Also fix .hash file indentation.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 9b92253b7a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
raptor_xml_writer_start_element_common in raptor_xml_writer.c in Raptor RDF
Syntax Library 2.0.15 miscalculates the maximum nspace declarations for the
XML writer, leading to heap-based buffer overflows (sometimes seen in
raptor_qname_format_as_xml).
For more details, see the oss-security discussion:
https://www.openwall.com/lists/oss-security/2020/11/13/1
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8a683a54cc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libmagic is an optional dependency of gensoimage that can raise the
following build failure:
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: /home/buildroot/autobuild/instance-0/output-1/host/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/lib/libmagic.a(compress.o): in function `uncompressbuf':
compress.c:(.text+0x7bc): undefined reference to `lzma_auto_decoder'
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: compress.c:(.text+0x828): undefined reference to `lzma_code'
/home/buildroot/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/8.3.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: compress.c:(.text+0x848): undefined reference to `lzma_end'
collect2: error: ld returned 1 exit status
genisoimage/CMakeFiles/genisoimage.dir/build.make:628: recipe for target 'genisoimage/genisoimage' failed
Fixes:
- http://autobuild.buildroot.org/results/7e06edc363817c9c9a1687ec89e9984a90a2012d
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6ca1b3ee2a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The wcsnrtombs function has been found to have multiple bugs in handling of
destination buffer size when limiting the input character count, which can
lead to infinite loop with no forward progress (no overflow) or writing past
the end of the destination buffer.
For more details, see the advisory:
https://www.openwall.com/lists/oss-security/2020/11/20/4
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 09caefda2a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- CVE-2020-25032: An issue was discovered in Flask-CORS (aka CORS Middleware
for Flask) before 3.0.9. It allows ../ directory traversal to access
private resources because resource matching does not ensure that pathnames
are in a canonical format.
Also drop outdated md5 checksum and fix .hash indentation.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c356b20ba8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4266c9f54f (package/gvfs: needs dynamic library) updated the
dependency of gvfs, but inverted the comment dependency, causing it to only
be shown if !static - Fix that.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Reviewed-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4c8a6d3aa6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- avoid read-heap-buffer-overflow in ares_parse_soa_reply found during
fuzzing
- Avoid theoretical buffer overflow in RC4 loop comparison
- Empty hquery->name could lead to invalid memory access
- ares_parse_{a,aaaa}_reply() could return a larger *naddrttls than was
passed in
https://c-ares.haxx.se/changelog.html#1_17_0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c7a369a907)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
* add a comment about the kernel header dependencies when bumping
versions
* set url to kernel.org as github is unmaintained and outdated
* use two spaces in hash-file
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ff30bab611)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When using a custom git or mercurial repository for u-boot the error message
indicating a version had not been provided incorrectly stated that the URL was
missing. Update the error message to indicate that it's the version that's
missing.
Signed-off-by: Garret Kelly <garret.kelly@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1271867831)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This will avoid the following build failure with qemu 5.0.0 and above:
/srv/storage/autobuild/run/instance-2/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-uclibc/8.3.0/../../../../x86_64-buildroot-linux-uclibc/bin/ld: /srv/storage/autobuild/run/instance-2/output-1/host/x86_64-buildroot-linux-uclibc/sysroot/usr/lib/../lib64/libnuma.a(libnuma.o): relocation R_X86_64_32 against `.rodata.str1.1' can not be used when making a PIE object; recompile with -fPIC
Fixes:
- http://autobuild.buildroot.org/results/616dff216a215dc0494c846d337e03e0795b2fb2
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6fe0298eec)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
--disable-bzip2 is not a recognized option so replace it by
--disable-libbz2 to match the target logic.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 41236c61b1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We change Trent's e-mail address in commit
1c20802d4b, but it turns out the new one
also doesn't work:
<trent.piepho@synapse.com>: host
synapse-com.mail.protection.outlook.com[104.47.57.138] said: 550 5.4.1
Recipient address rejected: Access denied. AS(201806281)
[DM6NAM11FT063.eop-nam11.prod.protection.outlook.com] (in reply to RCPT TO
command)
So let's drop Trent entirely, which orphans the libp11 package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4ceae1b2ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since there is not necessary to have support of systemd within the host
variant let's disable it unconditionally to solve the following errors:
/usr/bin/install -c -m 644 data/rauc.service '/usr/lib/systemd/system'
/usr/bin/install: cannot create regular file '/usr/lib/systemd/system/rauc.service': Permission denied
/usr/bin/install -c -m 644 data/de.pengutronix.rauc.conf 'no'
make[4]: *** [Makefile:1700: install-nodist_systemdunitDATA] Error 1
make[4]: *** Waiting for unfinished jobs....
Signed-off-by: Bartosz Bilas <b.bilas@grinn-global.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit abeebe1ea8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
While testing Buildroot on a Cortex-A5 that doesn't provide NEON, we
found out that a system generated with the ARM toolchain from Arm
didn't boot. It turns out that this ARM toolchain is built with:
--with-arch=armv7-a --with-fpu=neon --with-float=hard --with-mode=thumb
So, it uses NEON as its FPU, which means it can only work on CPU cores
that have NEON support. This commit adds the appropriate dependency to
the toolchain-external-arm-arm package, and adjusts the Config.in help
text accordingly.
While at it, it also drops the part of the Config.in help text that
says the code is tuned for Cortex-A9, as it is not the case: it was
the case for the Linaro toolchain (built with --with-tune=cortex-a9),
but not for the ARM toolchain, for which no specific --with-tune is
passed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Alexandre Belloni <alexandre.belloni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 8477c41244)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ppp decapsulator in tcpdump 4.9.3 can be convinced to allocate a
large amount of memory.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit e3a663f570)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The commit 05fea6e4a6 "infra/pkg-kconfig:
do not rely on package's .config as a timestamp" broke the kernel
version check of this linux-backports package (it was no longer
executed). Since linux-4.19, the kernel's build system internally
touches its .config file, so it can no longer be used as a stamp file.
The stamp file defined in KCONFIG_STAMP_DOTCONFIG variable of
pkg-kconfig infra need to be used instead.
This commit fixes the kernel version check.
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Tested-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 464bb73b92)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
- TROVE-2020-005: When completing a channel, relays now check more
thoroughly to make sure that it matches any pending circuits before
attaching those circuits. Previously, address correctness and Ed25519
identities were not checked in this case, but only when extending circuits
on an existing channel
For more details, see the release notes:
https://blog.torproject.org/node/1952
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Upstream backports package does not define the LEX/YACC Makefile
variables, contrary to the Kernel which is defining those in [1]. The
default "lex" and "yacc" are then used. On some systems, "yacc" is
Berkeley Yacc. Kconfig parser files are using non-Posix Bison
constructs.
Attempting to generate the parser with byacc fails with error:
yacc: e - line 97 of "zconf.y", syntax error
%destructor {
^
This patch defines the LEX and YACC Makefile variable to use flex and
bison, to fix this issue. The host-bison and host-flex dependencies are
added only if the host does not have them, following the same logic of
the Kernel.
[1] https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?id=73a4f6dbe70a1b93c11e2d1d6ca68f3522daf434
Signed-off-by: Julien Olivain <ju.o@free.fr>
Reviewed-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ec493ea489)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- AST-2020-001: Remote crash in res_pjsip_session
Upon receiving a new SIP Invite, Asterisk did not return the created
dialog locked or referenced.
- AST-2020-002: Outbound INVITE loop on challenge with different nonce
If Asterisk is challenged on an outbound INVITE and the nonce is changed
in each response, Asterisk will continually send INVITEs in a loop. This
causes Asterisk to consume more and more memory since the transaction will
never terminate (even if the call is hung up), ultimately leading to a
restart or shutdown of Asterisk. Outbound authentication must be
configured on the endpoint for this to occur.
For details, see the announcement:
https://www.asterisk.org/asterisk-news/asterisk-13-37-1-16-14-1-17-8-1-18-0-1-and-16-8-cert5-now-available-security/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 339d3e82e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Avoid setting executable bits for apparmor.service. This gets rid of a
corresponding warning during installation:
Configuration file ../target/usr/lib/systemd/system/apparmor.service
is marked executable. Please remove executable permission bits.
Proceeding anyway.
Signed-off-by: Stefan Agner <stefan@agner.ch>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a325eefc1b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Use fbset.c as the license file and, while at it, also update
indentation in hash file (two spaces)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1379ef161b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Build of xen tools fails if slirp is built before xen because xen is not
compatible with spice slirp which does not provide libslirp.h:
/home/buildroot/autobuild/instance-2/output-1/build/xen-4.13.0/tools/qemu-xen/net/slirp.c:40:10: fatal error: libslirp.h: No such file or directory
#include <libslirp.h>
^~~~~~~~~~~~
Indeed, xen prefers a system-provided slirp over its internal one
So add slirp as a mandatory dependency (now that we switched to the up
to date https://gitlab.freedesktop.org/slirp/libslirp)
This build failure is raised since, at least, version 4.13.0
Fixes:
- http://autobuild.buildroot.org/results/b80b33ed558518f7bbb0a3c8586bf2d0b8acc36f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit a0a5c184ef)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use an up to date fork (spice slirp is archived and has not been
updated since 2012)
- Add COPYRIGHT as the license file
- BSD-4-Clause has been replaced by BSD-3-Clause since
3bac39137af9f6e69c4e
- Add hash file
- Switch to meson-package
- Fix multiple security vulnerabilities: CVE-2014-3640, CVE-2017-11434,
CVE-2019-6778, CVE-2019-9824, CVE-2019-14378 and CVE-2020-10756
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 97fcae8ddf)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Set BITCOIN_GENBUILD_NO_GIT to not include (Buildroot) git version info in
build, which is available since version 0.15.0 and
e98e3dde6a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 82d6abda1a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
I haven't looked at that package and touched it for 6 years now, and
clearly others have taken care of it when looking at the Git history.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 19932c8e02)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Various bfd section macros and functions like bfd_section_size() have been
modified starting with binutils >= 2.34.
Add a patch to handle this API change.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit c2bfbdecd5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is needed to fix the build with freetype >= 2.10.3.
https://www.freetype.org/index.html#news
"A warning for distribution maintainers: Version 2.10.3 and later may
break the build of ghostscript, due to ghostscript's use of a with-
drawn macro that wasn't intended for external usage."
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5177f726a0)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
opencv3 does not install anything in $(TARGET_DIR)/usr/share/OpenCV/doc
so drop OPENCV3_CLEAN_INSTALL_DOC
However it installs its licence files in
$(TARGET_DIR)/usr/share/licenses/opencv3 so add
OPENCV3_CLEAN_INSTALL_LICENSE
Moreover, the cmake hook does not catch all cmake files and missed the
valgrind files so update OPENCV3_CLEAN_INSTALL_CMAKE and add
OPENCV3_CLEAN_INSTALL_VALGRIND to delete those files:
OpenCVConfig.cmake OpenCVConfig-version.cmake OpenCVModules.cmake OpenCVModules-release.cmake valgrind_3rdparty.supp valgrind.supp
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 436f4804b2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This reverts commit d01b0bbad0.
Original commit made restriction for Linux headers < 3.4 which was
related to keepalived version 1.3.5, but it compiles fine now at least
with a toolchain based on 3.2 headers and keepalived 2.0.15 together
with ipset enabled.
Probably it was fixed by this commit:
5a7f895bb7
Signed-off-by: Vadym Kochan <vadym.kochan@plvision.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c69a88190a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Busybox is mainly licensed under the GPL-2.0, but the bzip2 part is a
modified copy of the bzip2/libbzip2 project, which comes with its own
license.
Update the licensing information accordingly.
Add the hash for the new license file, and fixup indentation (2 spaces).
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit ca76d0336d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since we don't enable sysv any support, it makes no sense to set the
path to telinit either.
The path we were setting was anyway wrong: we set a path into
TARGET_DIR, but this path is only used at runtime, on the target, where
TARGET_DIR doesn't exist (it should have been /usr/sbin/telinit).
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 8bc9350963)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
If paths are not set, then meson will search the host system for the
binaries (or the target, where those binaries are not yet installed).
So add the missing paths.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit acb62b3336)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we many times by now discussed that - some ARC cores might
not have atomic instructions implemented. Namely that's ARC700
w/o explicitly added atomics during design creation/configuration.
Because of that when GCC gets configured for ARC700, i.e. via
"--with-cpu=arc700" atomic ops are assumed disabled.
Usually it's not a problem as we add "-matomics" in the wraper for
building all packages if targets CPU has atomis (BR2_ARC_ATOMIC_EXT).
But when bulding target's binaries which are essential parts of
the GCC itself we don't use the wrapper. Instead xgcc is being used.
That way we lose that important part of system's configuration about
atomics and:
1. Atomic ops won't be used where otherwise they could have been used.
2. Some configuration checks might end-up thinking there're no atomics
In particular (2) leads to pretty obscure failure on bulding of some
packages which use C++, for example:
log4cplus: http://autobuild.buildroot.net/results/a7732fdb2ba526a114d9fb759814236c5332f8d7
------------------------>8--------------------
./.libs/liblog4cplus.so: undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_notify_all(unsigned int*)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------
bitcoin: http://autobuild.buildroot.net/results/f73/f73d4c77e5fd6223abdbc83e344addcfc93227b8
------------------------>8--------------------
(.text+0x110c): undefined reference to `std::__atomic_futex_unsigned_base::_M_futex_wait_until(unsigned int*, unsigned int, bool, std::chrono::duration<long long, std::ratio<1ll, 1ll> >, std::chrono::duration<long long, std::ratio<1ll, 1000000000ll> >)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------
apcupsd: http://autobuild.buildroot.net/results/7a2/7a2cc7a4ac2237c185817f75e55e05d144efd100
------------------------>8--------------------
/tmp/instance-0/output-1/host/lib/gcc/arc-buildroot-linux-uclibc/9.3.1/../../../../arc-buildroot-linux-uclibc/bin/ld: eh_throw.cc:(.text._ZL23__gxx_exception_cleanup19_Unwind_Reason_CodeP17_Unwind_Exception+0x24): undefined reference to `__gnu_cxx::__exchange_and_add(int volatile*, int)'
collect2: error: ld returned 1 exit status
------------------------>8--------------------
...and many more.
Interesting enough that was not seen earlier because "-matomic"
used to be added in TARGET_{C|CXX}FLAGS via TARGET_ABI,
but later "-matomic" was moved to ARCH_TOOLCHAIN_WRAPPER_OPTS, see
https://git.buildroot.org/buildroot/commit/?id=c568b4f37fa6d7f51e6d14d33d7eb75dfe26d7bf
and since then we started to see that new breakage which we now
attempt to fix right where it hapens on GCC configuration.
In contrast ARC HS family has atomic ops enabled by default thus
we never spotted that kind of problem for it.
More datails with analysis of what really happens under the hodd and
how do error messages above are related to libs of GCC configuration could
be found here: http://lists.busybox.net/pipermail/buildroot/2020-October/293614.html
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Romain Naour <romain.naour@gmail.com>
[Peter: simplify conditional]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d2ae7eb2a2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- harfbuzz is mandatory since
f3e2c97e18
- Fix CVE-2020-26682 (In libass 0.14.0, the `ass_outline_construct`'s
call to `outline_stroke` causes a signed integer overflow.) through
676f9dc5b5
which does not apply cleanly over version 0.14.
It should be noted that version 0.15 also fixes other integer
overflows (which have no CVE assigned)
- Update indentation in hash file (two spaces)
https://github.com/libass/libass/releases/tag/0.15.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 4ae8ecea8f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Last commit fixed eglfs_kms support for i.MX8 platforms that required to
declare imx-gpu-viv as the gbm provider.
However, this broke the eglfs "fbdev" imx6 support as gbm isn't provided
in this case. So limit the gbm option to imx-gpu-viv when wayland
backend is used only.
Fixes: 82fb51d3b5 ("package/qt5/qt5base: allow to use imx-gpu-viv as GBM
provider")
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 25f2191ed2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
wine was bumped to 5.12 in commit
6daf15db41, but a few changes in
optional dependencies were not taken into account:
- A new optional dependency on libusb exists
- The option name to use libv4l has been changed
Signed-off-by: André Hentschel <nerv@dawncrow.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e9f0125bed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libtac in pam_tacplus through 1.5.1 lacks a check for a failure of
RAND_bytes()/RAND_pseudo_bytes(). This could lead to use of a
non-random/predictable session_id.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 70499767e5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Julien's e-mail @cotds.org is no longer working:
<juju@cotds.org>: host mail.cotds.org[194.117.244.136] said: 451 4.3.5 Server
configuration problem (in reply to RCPT TO command)
Use his @free.fr e-mail address instead.
Cc: Julien Olivain <ju.o@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[yann.morin.1998@free.fr: adjust email address after Julien's review]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 1194b5c81a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
His/her e-mail address is bouncing:
VMSDVM9.POK.IBM.COM unable to deliver following mail to recipient(s):
<mamatha4@linux.ibm.com>
VMSDVM9.POK.IBM.COM received negative reply:
550 5.1.1 <mamatha4@linux.ibm.com>: Recipient address rejected: User unknown in local recipient table
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 656c34dc87)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-14382: A vulnerability was found in upstream release
cryptsetup-2.2.0 where, there's a bug in LUKS2 format validation code,
that is effectively invoked on every device/image presenting itself as
LUKS2 container. The bug is in segments validation code in file
'lib/luks2/luks2_json_metadata.c' in function
hdr_validate_segments(struct crypt_device *cd, json_object *hdr_jobj)
where the code does not check for possible overflow on memory allocation
used for intervals array (see statement "intervals = malloc(first_backup
* sizeof(*intervals));"). Due to the bug, library can be *tricked* to
expect such allocation was successful but for far less memory then
originally expected. Later it may read data FROM image crafted by an
attacker and actually write such data BEYOND allocated memory.
https://mirrors.edge.kernel.org/pub/linux/utils/cryptsetup/v2.3/v2.3.4-ReleaseNotes
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit baa28856f1)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This is a follow-up to 4027ba29f4 ("package/nginx: use /run for
PIDFile"), in which we missed that nginx is still built with /var/run
paths.
This commit changes the compile options to use /run instead of
/var/run for pid and lock file to make it consistent.
Further dropping the passing of the pid option in the service file as
this isn't neccessary. Neither debian nor nginx default .service does
it.
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit d200ceffb2)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WebKit's JavaScriptCore does not support using JIT nor the LLint
interpreter on ARMv5 and ARMv6, so add those two cases when checking
for target CPUs which need to use the CLoop interpreter.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 594eb3df50)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ENABLE_C_LOOP option conflicts with ENABLE_SAMPLING_PROFILER, so
the WebKit CMake build system will emit an error when both are enabled
at the same time. To avoid hitting that situation, explicitly disable
ENABLE_SAMPLING_PROFILER as needed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit e6e78c1752)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
WebKit's JavaScriptCore does not support using JIT nor the LLint
interpreter on ARMv5 and ARMv6, so add those two cases when checking
for target CPUs which need to use the CLoop interpreter.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f8eaccdddc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ENABLE_C_LOOP option conflicts with ENABLE_SAMPLING_PROFILER, so
the WebKit CMake build system will emit an error when both are enabled
at the same time. To avoid hitting that situation, explicitly disable
ENABLE_SAMPLING_PROFILER as needed.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 7a66e3e189)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The Docker developers appear to no longer be tagging releases on the
docker/engine repository on GitHub, but are tagging releases on the main
moby/moby repository, which still is the true home of "dockerd."
This commit changes the upstream repo to moby/moby with no changes required.
Signed-off-by: Christian Stewart <christian@paral.in>
v1 -> v2:
- updated hash
- changed upstream to moby/moby
Signed-off-by: Christian Stewart <christian@paral.in>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5ebd4d9a61)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since version 2.34 binutils enables debuginfod support by default if the
debuginfod library is found to be available at build time.
On Fedora 32, libdebuginfod may be present on the system, and the
dependency chain of interest is then:
libdebuginfod.so
-> libcurl.so
-> libk5crypto.so
-> libcrypto.so
If the Buildroot configuration ever needs to build host-openssl, which
may happen when building the kernel to sign modules for example, this
leads to an inconsistency between the system-provided libcrypto and
ours, leading to missing symbols:
$ make defconfig
$ make host-binutils
$ ./output/host/bin/i686-buildroot-linux-uclibc-objdump --help
[--snip some help text--]
$ make host-openssl
$ ./output/host/bin/i686-buildroot-linux-uclibc-objdump --help
./output/host/bin/i686-buildroot-linux-uclibc-objdump: symbol lookup
error: /lib64/libk5crypto.so.3: undefined symbol: EVP_KDF_ctrl, version
OPENSSL_1_1_1b
EVP_KDF_ctrl comes from libcrypto:
$ nm -D /usr/lib64/libcrypto.so.1.1 |grep EVP_KDF_ctrl
0000000000176000 T EVP_KDF_ctrl
$ nm -D output/host/lib/libcrypto.so.1.1 |grep EVP_KDF_ctrl
[--empty--]
So, if host-binutils tools, like objdump et al., are called after our
host-openssl is built, then when run, the system-provided libk5crypto.so
is used, but our libcrypto.so is used, because of the RPATH we set on
our host tools.
And boom.
Note that there is also a latent similar issue if we were to build our
host-libcurl too...
Signed-off-by: Alexander Egorenkov <egorenar@linux.ibm.com>
[yann.morin.1998@free.fr: rewrite commit log with a bit more info]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a2b344a34d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
OPENCV3_WARNINGS_ARE_ERRORS option does not exist so rename it to
OPENCV_WARNINGS_ARE_ERRORS (even if it is already disabled by default)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit caeb69cbf7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Don't build shared library with BR2_SHARED_LIBS=OFF to avoid the
following build failure:
[100%] Linking CXX shared library libpistache.so
make[3]: Leaving directory `/home/buildroot/autobuild/run/instance-1/output-1/build/pistache-f2f5a50fbfb5b8ef6cf1d3d2a9d442a8270e375d'
[100%] Built target pistache_static
/home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/8.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: /home/buildroot/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/8.3.0/crtbeginT.o: relocation R_X86_64_32 against hidden symbol `__TMC_END__' can not be used when making a shared object
Fixes:
- http://autobuild.buildroot.org/results/6cc/6cc76b3e76defa9b8154568a6ebcd6bf4cadd334/build-end.log
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: update upstream status now they merged it]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 30e7f999af)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
snmpd loudly complains every 3 seconds about a failure reading
/proc/net/if_inet6 if the system does not have IPv6 support:
Jan 1 00:00:12 buildroot daemon.err snmpd[92]: ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
Jan 1 00:00:15 buildroot daemon.err snmpd[92]: ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
Jan 1 00:00:18 buildroot daemon.err snmpd[92]: ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
Jan 1 00:00:21 buildroot daemon.err snmpd[92]: ipaddress_linux: could not open /proc/net/if_inet6: No such file or directory
Add an upstream patch to only print this warning once, rather than on every
poll iteration.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit ae85c9fd71)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The brcmfmac drivers now load settings files for BCM434xx devices and
fail if they're missing on the Raspberry Pi:
brcmfmac mmc1:0001:1: Direct firmware load for brcm/brcmfmac43455-sdio.raspberrypi,3-model-b-plus.txt failed with error -2
This commit copies the missing settings files over to the firmware
directory with the other files.
Signed-off-by: Frank Hunleth <fhunleth@troodon-software.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit f76cbc2d48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[yann.morin.1998@free.fr: split to a separate condition]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit a25793ba04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 391c448acb (package/kernel-module-imx-gpu-viv: bear the kernel
options munging) improperly named the macro, including a superfluous
'MODULE' in the middle of the macro name, which meant it was totally
unused.
Fix that.
Reported-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 74a8865b2f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-26159: In Oniguruma 6.9.5_rev1, an attacker able to supply
a regular expression for compilation may be able to overflow a buffer by
one byte in concat_opt_exact_str in src/regcomp.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5dbebf3d35)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When building iputils for powerpc with BR2_PIC_PIE enabled, the
arping/rdisc/tftpd binaries will segfault at runtime. This can be
traced back to a few bugs in patchelf corrupting the ELFs when
resizing the RPATH to replace "$ORIGIN/" with "/usr/sbin".
This patch pulls in upstream fixes to prevent the binaries from being
needlessly inflated, prevent the startPage from always being adjusted,
fix a few minor bugs, and fix incorrect endianness handling.
Signed-off-by: Conrad Ratschan <conrad.ratschan@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 1be8b22f48)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
sentry-sdk has a set of optional "integrations", some of which use asyncio.
pycompile unfortunately errors out on these files when running under Python
2.x:
../scripts/pycompile.py ..
error: File "/usr/lib/python2.7/site-packages/sentry_sdk/integrations/sanic.py", line 64
async def sentry_handle_request(self, request, *args, **kwargs):
^
SyntaxError: invalid syntax
As a workaround, simply drop the unusable files from TARGET_DIR if building
for python 2.x.
Fixes:
http://autobuild.buildroot.net/results/9e4/9e47ee2a56153379e4e7bc839be5972a2302ba9f/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d62f0042e8)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Pymodbus has optional support for asyncio. Pycompile unfortunately errors
out on these files when running under Python 2.x:
../scripts/pycompile.py ..
error: File "/usr/lib/python2.7/site-packages/pymodbus/client/asynchronous/asyncio/__init__.py", line 257
yield from self._connect()
^
SyntaxError: invalid syntax
As a workaround, simply drop the unusable files from TARGET_DIR if building
for python 2.x.
Fixes:
http://autobuild.buildroot.net/results/cc4/cc48927cbe9ae6c2d8b12d65467ec40df82febf6/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 7d417ed7f3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes a regression introduced in patch level 16.
Rename the 2 uClibc patches so the upstream patch numbering matches ours.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d73ec6e0ab)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop unneeded CC variable which is not recognized by cmake:
CMake Warning:
Manually-specified variables were not used by the project:
BUILD_DOC
BUILD_DOCS
BUILD_EXAMPLE
BUILD_EXAMPLES
BUILD_TEST
BUILD_TESTING
BUILD_TESTS
CC
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 404efde6cb)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-25862: In Wireshark 3.2.0 to 3.2.6, 3.0.0 to 3.0.13, and
2.6.0 to 2.6.20, the TCP dissector could crash. This was addressed in
epan/dissectors/packet-tcp.c by changing the handling of the invalid
0xFFFF checksum.
- Fix CVE-2020-25863: In Wireshark 3.2.0 to 3.2.6, 3.0.0 to 3.0.13, and
2.6.0 to 2.6.20, the MIME Multipart dissector could crash. This was
addressed in epan/dissectors/packet-multipart.c by correcting the
deallocation of invalid MIME parts.
- Fix CVE-2020-25866: In Wireshark 3.2.0 to 3.2.6 and 3.0.0 to 3.0.13,
the BLIP protocol dissector has a NULL pointer dereference because a
buffer was sized for compressed (not uncompressed) messages. This was
addressed in epan/dissectors/packet-blip.c by allowing reasonable
compression ratios and rejecting ZIP bombs.
https://www.wireshark.org/docs/relnotes/wireshark-3.2.7.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit d9521e0447)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/829/8293529a72ac4c8e93919b8bc0ea758fbb4bc444/
Python 2.x gets confused by rb"string", but not br"string", so add an
upstream patch changing the former to the latter to fix a pycompile issue
with python 2.x:
error: File "/usr/lib/python2.7/site-packages/scapy/tools/generate_ethertypes.py", line 23
reg = rb".*ETHERTYPE_([^\s]+)\s.0x([0-9A-Fa-f]+).*\/\*(.*)\*\/"
^
SyntaxError: invalid syntax
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Some external packages call pg_config to determine the installed
PostgreSQL server includedir and configure options. Add this output to
Buildroots own pg_config, so these packages correctly compile.
Signed-off-by: Maxim Kochetkov <fido_max@inbox.ru>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 787ad0b35d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes (reproducible):
http://autobuild.buildroot.net/results/50f/50f199bfe06d054cc6770760e73ac0de594a0670/diffoscope-results.txt
Fail2ban installs the fail2ban-python symlink pointing to the host python
intepreter used to run setup.py, which is naturally not valid at runtime and
breaks the reproducible tests as shown in the diffoscope results:
│ -lrwxrwxrwx 0 0 0 0 2020-10-04 10:50:38.000000 ./usr/bin/fail2ban-python -> /home/naourr/work/instance-0/output-1/host/bin/python
│ +lrwxrwxrwx 0 0 0 0 2020-10-04 10:50:38.000000 ./usr/bin/fail2ban-python -> /home/naourr/work/instance-0/output-2/host/bin/python
As a workaround, update the symlink after installation to point to the
correct target python.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 084ffc69be)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
engineio has conditional logic to load asyncio files when running under
Python 3.x:
if sys.version_info >= (3, 5): # pragma: no cover
from .asyncio_server import AsyncServer
from .asyncio_client import AsyncClient
from .async_drivers.asgi import ASGIApp
try:
from .async_drivers.tornado import get_tornado_handler
except ImportError:
get_tornado_handler = None
else: # pragma: no cover
AsyncServer = None
AsyncClient = None
get_tornado_handler = None
ASGIApp = None
pycompile unfortunately errors out on these files when running under Python
2.x:
../scripts/pycompile.py ..
error: File "/usr/lib/python2.7/site-packages/engineio/asyncio_socket.py", line 13
async def poll(self):
^
SyntaxError: invalid syntax
As a workaround, simply drop the unusable file from TARGET_DIR if building
for python 2.x.
Fixes:
http://autobuild.buildroot.net/results/72c/72cfdffeb4d0fb7c3032b52f0a26a4758eea6762/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit b8ae383dd3)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
socketio has conditional logic to load asgi/asyncio files when running under
Python 3.x:
if sys.version_info >= (3, 5): # pragma: no cover
from .asyncio_client import AsyncClient
from .asyncio_server import AsyncServer
from .asyncio_manager import AsyncManager
from .asyncio_namespace import AsyncNamespace, AsyncClientNamespace
from .asyncio_redis_manager import AsyncRedisManager
from .asyncio_aiopika_manager import AsyncAioPikaManager
from .asgi import ASGIApp
else: # pragma: no cover
AsyncClient = None
AsyncServer = None
AsyncManager = None
AsyncNamespace = None
AsyncRedisManager = None
AsyncAioPikaManager = None
pycompile unfortunately errors out on these files when running under Python
2.x:
../scripts/pycompile.py ..
error: File "/usr/lib/python2.7/site-packages/socketio/asyncio_server.py", line 84
async def emit(self, event, data=None, to=None, room=None, skip_sid=None,
^
SyntaxError: invalid syntax
As a workaround, simply drop the unusable file from TARGET_DIR if building
for python 2.x.
Fixes:
http://autobuild.buildroot.net/results/455f3e09a590f7a6724ab8cd1b86bdf2bba8071a/
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6beb6dd5c6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch sets the --with-xattr option when generating an image with
mkfs.jffs2, so that SELinux security contexts and other extended
attributes will be kept and available in jffs2 images.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c1e268670b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When compiling the host version of mtd, --with-jffs and --with-ubifs are
always set, meaning --with-xattr is set by default. The xattr support
only work if 'sys/acl.h' is available, otherwise the feature is silently
dropped (a warning is shown during the configuration step).
This patch adds a dependency on host-acl for host-mtd, so that the xattr
feature is correctly supported. Logic to have xattr support is already
there and working for the non-host flavour.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Reviewed-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit c3902e6e2e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
apply-patches currently blindly removes *.orig / .*.orig files as GNU patch
by default writes these as backup files when patches only apply with fuzz.
This is unfortunate as package sources may contain files ending in .orig as
well, breaking the build. Luckily GNU patch can be told to not write these
backup files using the --no-backup-if-mismatch option, so used that instead
of the .orig removal step.
--no-backup-if-mismatch is supported since GNU patch 2.3.8 (1997-06-17) and
busybox patch if built with CONFIG_DESKTOP, but E.G. isn't supported by the
BSD patch, so add logic to dependencies.sh to error out if patch doesn't
support the flag.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 42f61e759a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This partially reverts commit a3aac6d847,
just dropping the atomic dependency.
That dependency would introduce a "recursive dependency" chain in
Kconfig.
However, r100 is only available on i386 and x86-64, and they both have
sync4, which means libdrm's HAS_ATOMICS is always 'y' when r100 is
available.
So, like we did in 00c1a8c34f (package/mesa3d: propagate missing
libdrm-freedreno deps), we just add a fat comment that explains why the
dependency is not propagated.
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Cc: James Hilliard <james.hilliard1@gmail.com>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
(cherry picked from commit 0b029cac1b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The buildroot custom bareboxenv compile command misses the additional
include path 'scripts/include' to gain access to the local copy of the
kernel header files (which leads to compile error when using an older
toolchain).
This could be fixed by enhancing the custom bareboxenv compile command
(see [1]) or by using the barebox build system by simply enabling the
CONFIG_BAREBOXENV_TARGET option (available since April 2012, see [2])
instead (as suggested by Yann E. MORIN).
Fixes (with BR2_TARGET_BAREBOX_BAREBOXENV enabled):
build/barebox-2019.12.0/scripts/bareboxenv.c💯10: fatal error: linux/list.h: No such file or directory
[1] http://lists.busybox.net/pipermail/buildroot/2020-January/270942.html
[2] https://git.pengutronix.de/cgit/barebox/commit/?id=afb03d7a554a2911a3742e316f011319fcb416f1
Note: a user who would previously provide a barebox config file which
had CONFIG_BAREBOXENV_TARGET=y, but a Buildroot config file which did
not have BR2_TARGET_BAREBOX_BAREBOXENV=y, would have bareboxenv-target
built, but it would not be installed in the target. Now, and unset
BR2_TARGET_BAREBOX_BAREBOXENV will not even build it, but his is not a
regression: it was anyway previously not installed.
Reported-by: Frederick Gotham <cauldwell.thomas@gmail.com>
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
[yann.morin.1998@free.fr:
- also explicitly disable it when not selected
- rewrap commit log
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3cc2534b57)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-7069: In PHP versions 7.2.x below 7.2.34, 7.3.x below
7.3.23 and 7.4.x below 7.4.11, when AES-CCM mode is used with
openssl_encrypt() function with 12 bytes IV, only first 7 bytes of the
IV is actually used. This can lead to both decreased security and
incorrect encryption data.
- Fix CVE-2020-7070: In PHP versions 7.2.x below 7.2.34, 7.3.x below
7.3.23 and 7.4.x below 7.4.11, when PHP is processing incoming HTTP
cookie values, the cookie names are url-decoded. This may lead to
cookies with prefixes like __Host confused with cookies that decode to
such prefix, thus leading to an attacker being able to forge cookie
which is supposed to be secure. See also CVE-2020-8184 for more
information.
https://www.php.net/ChangeLog-7.php#7.4.11
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 51d9617474)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
All the python packages are inside a
if BR2_PACKAGE_PYTHON || BR2_PACKAGE_PYTHON3
conditional, so no need to repeat it in the Config.in.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 36031fd91d)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 9e4ffdc8cf modified the output of
'setlocalversion' so that the Buildroot version tag is included in the
output, the version part was added in Makefile.
Due to differences in behavior of the used git and Mercurial commands, this
caused different output for the Mercurial case, in BR2_VERSION_FULL and thus
/etc/os-release and 'make print-version'. Assuming the official Buildroot
releases are tagged and no project-specific tags are present, the output
after commit 9e4ffdc8cf is:
-hg<commit>
whereas it is expected to be something like:
2020.02.6-hg<commit>
Change the Mercurial case in setlocalversion to behave similar to git,
looking up the latest tag if the current revision is not itself tagged.
The number of commits after the latest tag is not added, unlike in git, as
this value is not commonly present in Mercurial output, and its added value
can be disputed in this context. Even one commit could bring a huge change
to the sources, so in order to interpret the number one has to look at the
repository anyhow, in which case the commit ID can just be used.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 32eb5a1d16)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The content of the license file (doc/readme.html) differs between lua 5.3
and 5.4, so we cannot use a shared .hash file for all versions.
Signed-off-by: Francois Perrad <francois.perrad@gadz.org>
[Peter: extend commit message]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 036c41db1a)
[Peter: drop 5.4]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/72e0cc78194a1b93bf26a50742e59a1e93bde1d1/
fire has conditional logic to load test_components_py3.py when running under
Python 3.x:
if six.PY3:
from fire import test_components_py3 as py3
pycompile unfortunately errors out on it:
../scripts/pycompile.py ..
error: File "/usr/lib/python2.7/site-packages/fire/test_components_py3.py", line 18
def identity(arg1, arg2: int, arg3=10, arg4: int = 20, *arg5,
^
SyntaxError: invalid syntax
As a workaround, simply drop the unusable _py3 file from TARGET_DIR if
building for python 2.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 6bfedaf577)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/4ca459d54545c0e20b0f0cdc63bd81844ecd7f36/
aenum has conditional logic to load python 3.x code located in test_v3.py:
if pyver >= 3.0:
from aenum.test_v3 import TestEnumV3, TestOrderV3, TestNamedTupleV3
And contains logic in setup.py to drop that file during setup.py install if
building for python 2.x:
py3_only = ('aenum/test_v3.py', )
..
if __name__ == '__main__':
if 'install' in sys.argv:
import os, sys
..
if sys.version_info[0] != 3:
for file in py3_only:
try:
os.unlink(file)
But this doesn't work in Buildroot as pkg-python.dk first does setup.py
build (which copies test_v3.py to the build directory) before setup.py
install, so test_v3.py gets installed, leading to errors from pycompile:
error: File "/usr/lib/python2.7/site-packages/aenum/test_v3.py", line 12
class MagicAutoNumberEnum(Enum, settings=AutoNumber):
^
SyntaxError: invalid syntax
As a workaround, add a hook to drop it from the target directory when
building for python 2.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 753c031977)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix a security issue: When enabling SASL authentication for binary
protocol, enabling UDP mode would allow bypassing SASL. Now refuses
to start with both UDP and SASL enabled. Text mode authentication was
not vulnerable.
- Drop patches (already in version) and so autoreconf
- Update indentation in hash file (two spaces)
https://github.com/memcached/memcached/wiki/ReleaseNotes1522
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2020-8201: HTTP Request Smuggling due to CR-to-Hyphen conversion
Affected Node.js versions converted carriage returns in HTTP request
headers to a hyphen before parsing. This can lead to HTTP Request
Smuggling as it is a non-standard interpretation of the header.
Impacts:
All versions of the 14.x and 12.x releases line
- CVE-2020-8252: fs.realpath.native may cause buffer overflow
libuv's realpath implementation incorrectly determined the buffer size
which can result in a buffer overflow if the resolved path is longer than
256 bytes.
Impacts:
All versions of the 10.x release line
All versions of the 12.x release line
For more details, see the advisory:
https://nodejs.org/en/blog/vulnerability/september-2020-security-releases/
Adjust license hash for the addition of the BSD-3c licensed highlight.js:
6f8b7a85d2
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit b6d64d7fa4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
We used to have a conditional patch applied on PowerPC soft-float, but
this logic was dropped in commit
0c82f3f635 ("package/gcc: remove powerpc
conditional patching logic"). However, we still have some related
leftovers in the calculation of the hashes for ccache, which can now
be dropped.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Romain Naour <romain.naour@gmail.com>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a4fb6dedfc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The logic in libbacktrace/configure.ac to detect if __sync builtins
are available assumes they are as soon as target_subdir is not
empty, i.e when cross-compiling. However, some platforms do not have
__sync builtins, so help the configure script a bit.
"libbacktrace_cv_sys_sync=no" is lost when it is added to
HOST_GCC_COMMON_CONF_ENV because the environment is not exported
when executing the libbacktrace configure script.
Use target_configargs to force "libbacktrace_cv_sys_sync=no" when
executiong the libbacktrace configure script.
Fixes:
https://gitlab.com/bootlin/toolchains-builder/-/jobs/729359681
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
[Romain: use target_configargs="libbacktrace_cv_sys_sync=no"]
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 0bec4c8a4a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit f89ca996b6 enabled linux-pam on
musl however rlogind fails to build on musl because it uses logwtmp:
/home/giuliobenetti/autobuild/run/instance-1/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/8.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: rlogind.c:(.text.startup+0x9ec): undefined reference to `logwtmp'
As this package is unmaintained, just disable back rlogind on musl
Fixes:
- http://autobuild.buildroot.org/results/f2eb1c0bab7c6c32d6c561da0f85a530bd419206
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 14532e4fc6)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When gdb is built from sources fetched from Git, it contains both the
gdb and the binutils code base. In order to really build only gdb, we
disable a number of binutils components in the
GDB_DISABLE_BINUTILS_CONF_OPTS variable: --disable-binutils,
--disable-ld, --disable-gas, etc. However, gprof was still being
built, so disable it as well.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 71719b91ee)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/76b580000e6311e88584874f942517badd6fadf6/
python-txtorcon DOES support python 2.x, but it contains some optional
python 3 / async code in controller_py3.py which is conditionally used from
controller.py:
try:
from .controller_py3 import _AsyncOnionAuthContext
HAVE_ASYNC = True
except Exception:
HAVE_ASYNC = False
pycompile unfortunately errors out on the async code:
../scripts/pycompile.py ..
error: File "/usr/lib/python2.7/site-packages/txtorcon/controller_py3.py", line 13
async def __aenter__(self):
^
SyntaxError: invalid syntax
As a workaround, simply drop the unusable _py3 file from TARGET_DIR if
building for python 2.x.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 6728c67307)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The host-zstd-build step was not actually compiling the library:
make[1]: Entering directory '/buildroot/output/build/host-zstd-1.4.5/lib'
make[1]: Nothing to be done for 'default'.
make[1]: Leaving directory '/buildroot/output/build/host-zstd-1.4.5/lib'
and the actual compilation was part of the install step.
This is not how other Buildroot packages work.
Make sure to specify which library targets we want instead. The total amount
of compiled files does not change with this patch.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 2e8bf36dc4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
fixes following in the generated cross-complation.conf file:
pkg_config_static = '$(if $(BR2_STATIC_LIBS),true,false)'
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 78da84eca9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The fakeroot script does not appear to be used in any of the checked
in defconfig targets, but it seems that most often the post
fakeroot script should be done after all the packages rules have
been applied instead of before.
Given that a change in systemd moved the SYSTEMD_PRESET_ALL hook to
a ROOTFS_PRE_CMD_HOOKS, there was no way to use a FAKEROOT script
to disable a service or fixup a systemd configuration. The systemd
move makes sense, and this just tries to preserve the same ability
to fixup a rootfs after all the cmd hooks are processed.
Refer to commit 65b63785a6 for
the change that instigated this reordering.
Signed-off-by: Charles Hardin <ckhardin@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 4bc4dbd630)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When one GPL-licensed plugin was enabled, the license of
gst1-plugins-ugly would be "LGPL-2.1+ GPL-2.0", but licenses should be
comma separated, not space separated. So let's fix that to get the
expected value of "LGPL-2.1+, GPL-2.0".
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4626bafe5c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
PowerPC has two PLT models: BSS-PLT and Secure-PLT. BSS-PLT uses
runtime code generation to generate the PLT stubs. Secure-PLT was
introduced with GCC 4.1 and Binutils 2.17 (base has GCC 4.2.1 and
Binutils 2.17), and is a more secure PLT format, using a read-only
linkage table, with the dynamic linker populating a non-executable
index table.
References to other distro/BSD transitions:
https://patchwork.openembedded.org/patch/106621/https://reviews.freebsd.org/D20598
Fixes a bug observed when creating SELinux policy where all apps
require execmem because the heap requires execute before this change.
Signed-off-by: Matthew Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit f9b539bf40)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
According to the original patch message:
Some Broadcom set-top-box boards have PCI busses, but the GPU is
still probed through DT. We would dereference a null busid here
in that case.
Fixes a segfault on at least the RPi 4 w/ xserver 1.20.9, probably
others as well.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6427ede939)
[Peter: move to 1.20.9 subdir]
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes:
http://autobuild.buildroot.net/results/d2d/d2d73f3c7075ca6e9782b9bb591dae40ab56b6a2/
ffmpeg configure prints: "ERROR: fontconfig not found using pkg-config"
Please note that the ffmpeg build error was reproducible but with a
different error message in ffbuild/config.log:
sysroot/usr/lib/libfontconfig.a(fccache.o): in function `lock_cache':
fccache.c:(.text+0xcd8): undefined reference to `pthread_mutex_init'
arm-buildroot-linux-gnueabi/bin/ld: fccache.c:(.text+0xcf8):
undefined reference to `pthread_mutex_destroy'
arm-buildroot-linux-gnueabi/bin/ld: fccache.c:(.text+0xd00):
undefined reference to `pthread_mutex_lock'
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a5d70b2a03)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fix CVE-2020-14342: It was found that cifs-utils' mount.cifs was
invoking a shell when requesting the Samba password, which could be used
to inject arbitrary commands. An attacker able to invoke mount.cifs with
special permission, such as via sudo rules, could use this flaw to
escalate their privileges.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit ce0e86b293)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
GNOME project libxml2 v2.9.10 and earlier have a global Buffer Overflow
vulnerability in xmlEncodeEntitiesInternal at libxml2/entities.c.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a530ca6bd9)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Disable static building of external/squirrel to fix the following build
failure with RELRO:
/home/peko/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/8.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: CMakeFiles/sq_static.dir/sq.c.o: relocation R_X86_64_32 against `.rodata.str1.8' can not be used when making a PIE object; recompile with -fPIC
/home/peko/autobuild/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-buildroot-linux-musl/8.3.0/../../../../x86_64-buildroot-linux-musl/bin/ld: final link failed: nonrepresentable section on output
collect2: error: ld returned 1 exit status
Fixes:
- http://autobuild.buildroot.org/results/46e8f5e622ce450a89bc6d70f4bfd38182557901
- http://autobuild.buildroot.org/results/a43720492d817e4555d728546da9114e3ccba952
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 80be040817)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes
See: https://github.com/redis/redis/blob/6.0.8/00-RELEASENOTES
================================================================================
Redis 6.0.7 Released Fri Aug 28 11:05:09 IDT 2020
================================================================================
Upgrade urgency MODERATE: several bugs with moderate impact are fixed,
Specifically the first two listed below which cause protocol errors for clients.
================================================================================
Redis 6.0.8 Released Wed Sep 09 23:34:17 IDT 2020
================================================================================
Upgrade urgency HIGH: Anyone who's using Redis 6.0.7 with Sentinel or
CONFIG REWRITE command is affected and should upgrade ASAP, see #7760.
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 882a8550bc)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The previous commit to this package
(37c5e903a7) introduced a bunch of patches
to fix a CVE. Unfortunatly only applying of the patches was tested but
not building the package.
This commit replaces a define that was introduced in a previous patch
upstream and caused the build failure.
Tested:
br-arm-full [1/6]: OK
br-arm-cortex-a9-glibc [2/6]: OK
br-arm-cortex-m4-full [3/6]: SKIPPED
br-x86-64-musl [4/6]: OK
br-arm-full-static [5/6]: OK
sourcery-arm [6/6]: OK
Fixes:
- http://autobuild.buildroot.net/results/3f7fe8ad181318153c459ba5e1afbbc8b49d541c/
- and more
Cc: Peter Korsgaard <peter@korsgaard.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 3b81307162)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Currently, the cross-compilation.conf installed in
$(HOST_DIR)/etc/meson/cross-compilation.conf for use by the SDK is
generated in a post-install-staging hook of the toolchain package.
With per-package directory support enabled, this means that the
generated cross-compilation.conf contains references to the
per-package directory of the toolchain/ package, which is not want we
want:
[binaries]
c = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-gcc'
cpp = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-g++'
ar = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-ar'
strip = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/bin/arm-linux-strip'
pkgconfig = '/home/thomas/projets/buildroot/output/per-package/toolchain/host/usr/bin/pkg-config'
So instead, we generate this file in TOOLCHAIN_TARGET_FINALIZE_HOOKS,
so that the global paths are used:
[binaries]
c = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-gcc'
cpp = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-g++'
ar = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-ar'
strip = '/home/thomas/projets/buildroot/output/host/bin/arm-linux-strip'
pkgconfig = '/home/thomas/projets/buildroot/output/host/usr/bin/pkg-config'
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Reviewed-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 48d2606e28)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add several upstream patches that are made to fix this CVE. Since there
is still no dated plan to release a new version add this bunch of
patches.
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 37c5e903a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Just like glibc, host-localedef needs python3 on the host to
build... since host-localedef is basically using the sources of glibc.
Fixes:
checking if /build/build/per-package/host-localedef/host/bin/ccache
/usr/bin/gcc is sufficient to build libc... yes
checking for x86_64-pc-linux-gnu-nm... /usr/bin/nm
checking for python3... no
checking for python... python
checking version of python... 2.7.18, bad
configure: error:
*** These critical programs are missing or too old: python
*** Check the INSTALL file for required versions.
As reported at:
http://lists.busybox.net/pipermail/buildroot/2020-September/291929.html
Signed-off-by: Michael Nosthoff <buildroot@heine.tech>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6e73c71cc4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use tar.gz as SHA512SUMS does not contain the hash for tar.xz
- Fix CVE-2020-15900: A memory corruption issue was found in Artifex
Ghostscript 9.50 and 9.52. Use of a non-standard PostScript operator
can allow overriding of file access controls. The 'rsearch'
calculation for the 'post' size resulted in a size that was too large,
and could underflow to max uint32_t.
https://www.ghostscript.com/doc/9.53.0/News.htm
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit cae8be20ed)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot generates Linux systems, so there is no need to have
MS Windows executables in there.
This reduces the target filesystem size by about 600kB:
$ du -hcs usr/lib/python2.7/distutils/command/wininst-*.exe
60K usr/lib/python2.7/distutils/command/wininst-6.0.exe
64K usr/lib/python2.7/distutils/command/wininst-7.1.exe
60K usr/lib/python2.7/distutils/command/wininst-8.0.exe
192K usr/lib/python2.7/distutils/command/wininst-9.0.exe
220K usr/lib/python2.7/distutils/command/wininst-9.0-amd64.exe
596K total
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a7e71716f5)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Buildroot generates Linux systems, so there is no need to have
MS Windows executables in there.
This reduces the target filesystem size by about 2MB:
$ du -hcs usr/lib/python3.8/distutils/command/wininst-*.exe
60K usr/lib/python3.8/distutils/command/wininst-6.0.exe
64K usr/lib/python3.8/distutils/command/wininst-7.1.exe
60K usr/lib/python3.8/distutils/command/wininst-8.0.exe
192K usr/lib/python3.8/distutils/command/wininst-9.0.exe
220K usr/lib/python3.8/distutils/command/wininst-9.0-amd64.exe
188K usr/lib/python3.8/distutils/command/wininst-10.0.exe
220K usr/lib/python3.8/distutils/command/wininst-10.0-amd64.exe
448K usr/lib/python3.8/distutils/command/wininst-14.0.exe
576K usr/lib/python3.8/distutils/command/wininst-14.0-amd64.exe
2,0M total
Signed-off-by: Titouan Christophe <titouan.christophe@railnova.eu>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 4e97032c82)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4e60247be6 ("package/xerces: fix
coding style in Config.in") introduced a silly typo in the xerces
package depends on... which effectively made it impossible to enable
this package as the "USE_WCHAR" option does not exist.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 6e61a4ce04)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When generating a .pyc file, the original .py source file path is
encoded in it. It is used for various purposes: traceback generation,
.pyc file comparison with its .py source, and code inspection.
By default, the source path used when invoking compileall is encoded in
the .pyc file. Since we use paths relative to TARGET_DIR, we end up with
paths that are only valid when relative to '/' encoded in the installed
.pyc files on the target.
This breaks code inspection at runtime since the original source path
will be invalid unless the code is executed from '/'.
Unfortunately, compileall cannot be forced to use the proper path. It
was not written with cross-compilation usage in mind.
Rework the script to call py_compile.compile() directly with pertinent
options:
- The script now has a new --strip-root argument. This argument is
optional but will always be specified when compiling py files in
buildroot.
- All other (non-optional) arguments are folders in which all
"importable" .py files will be compiled to .pyc.
- Using --strip-root=$(TARGET_DIR), the future runtime path of each .py
file is computed and encoded into the compiled .pyc.
No need to change directory before running the script anymore.
The trickery used to handle error reporting was only applicable with
compileall. Since we implement our own "compileall", error reporting
becomes trivial.
Previously, we had a --force option to tell compileall.compiledir() to
forcibly recompile files if they had changed. Now, we would have to
handle it ourselves. It turns out to not be easy and would need us to
delve into the format of bytecompiled files to extract metadata and
compare it with the expected values, that being even dependent on the
python version being used (fortunately, only two for us: python 2.7 and
the latext 3.x).
Still, this is deemed too complex, and byte-compiling is pretty fast, so
much so that it should be eclipsed by the build duration anyway.
So we just drop support for --force, and instead we always byte-compile.
Signed-off-by: Julien Floret <julien.floret@6wind.com>
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
[yann.morin.1998@free.fr:
- always byte-compile
- drop --force
- expand commit log to state so and explain why
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit c566f5206a)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Only run code when the script is executed directly (not imported).
Factorize command description by using the script's __doc__ variable.
Fix typo in --force help message.
Signed-off-by: Robin Jarry <robin.jarry@6wind.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 7b3025f93e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit adds a patch that passes -fno-builtin to fix the build
with gcc 10. The patch has been submitted upstream.
There are no autobuilder failures, since it's a bootloader package,
and therefore not tested by the autobuilders. However, a build failure
was detected when building toolchains and a minimal ARMv7-M system at
https://gitlab.com/bootlin/toolchains-builder/-/jobs/729359529.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 1c967e2c8c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
- CVE-2020-15166: Denial-of-Service on CURVE/ZAP-protected servers by
unauthenticated clients.
If a raw TCP socket is opened and connected to an endpoint that is fully
configured with CURVE/ZAP, legitimate clients will not be able to exchange
any message. Handshakes complete successfully, and messages are delivered
to the library, but the server application never receives them. For more
information see the security advisory:
https://github.com/zeromq/libzmq/security/advisories/GHSA-25wp-cf8g-938m
- Stack overflow on server running PUB/XPUB socket (CURVE disabled).
The PUB/XPUB subscription store (mtrie) is traversed using recursive
function calls. In the remove (unsubscription) case, the recursive calls
are NOT tail calls, so even with optimizations the stack grows linearly
with the length of a subscription topic. Topics are under the control of
remote clients - they can send a subscription to arbitrary length topics.
An attacker can thus cause a server to create an mtrie sufficiently large
such that, when unsubscribing, traversal will cause a stack overflow. For
more information see the security advisory:
https://github.com/zeromq/libzmq/security/advisories/GHSA-qq65-x72m-9wr8
- Memory leak in PUB server induced by malicious client(s) without CURVE/ZAP.
Messages with metadata are never processed by PUB sockets, but the
metadata is kept referenced in the PUB object and never freed. For more
information see the security advisory:
https://github.com/zeromq/libzmq/security/advisories/GHSA-4p5v-h92w-6wxw
- Memory leak in client induced by malicious server(s) without CURVE/ZAP.
When a pipe processes a delimiter and is already not in active state but
still has an unfinished message, the message is leaked.
For more information see the security advisory:
https://github.com/zeromq/libzmq/security/advisories/GHSA-wfr2-29gj-5w87
- Heap overflow when receiving malformed ZMTP v1 packets (CURVE disabled).
By crafting a packet which is not valid ZMTP v2/v3, and which has two
messages larger than 8192 bytes, the decoder can be tricked into changing
the recorded size of the 8192 bytes static buffer, which then gets
overflown by the next message. The content that gets written in the
overflown memory is entirely decided by the sender.
For more information see the security advisory:
https://github.com/zeromq/libzmq/security/advisories/GHSA-fc3w-qxf5-7hp6
Drop now upstreamed patches, autoreconf and reformat hash file with 2 space
delimiters.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit fd1ac2e762)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On aarch64 With the config option "--enable-mpers=check" the configure.ac
script searchs for a 32bit compiler. When a matching compiler is found
in the PATH some compatiblity checks are done. This can fail when the
available kernel headers on host and buildroot target does not match.
Since buildroot does not support 32bit binaries when building for 64bit
architecture (no -m32 option) we can disable this option unconditionally.
When disabling unconditionally also the configuration for toolchain using
MUSL can be removed.
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: Heiko Thiery <heiko.thiery@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit bae6142582)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Since commit efa95b19ae
("package/libxml-parser-perl: make host build use correct compiler"),
we pass $(HOST_CONFIGURE_OPTS) when building host-libxml-parser-perl,
in order to use the correct host compiler.
However, this means that LD="$(HOSTLD)" is passed. However, the
host-libxml-parser-perl passes compiler arguments to LD, so it really
assumes that LD is gcc, not ld. For example, it tries to pass
-mtune=generic.
So, let's tell host-libxml-parser-perl that LD is "$(HOSTCC)".
Fixes:
http://autobuild.buildroot.net/results/2ed2e5ccefe9047c597f84d5880de2e8de2bdd94/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Tested-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 43a26d7fe4)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This package uses gcc filename without absolute path, which breaks
the host build if host and target compiler have the same filename.
(Can happen with an external toolchain).
This patch adds the variables for the host as overrides,
as they are otherwise not picked up from the environment.
Signed-off-by: Norbert Lange <nolange79@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit efa95b19ae)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2020-15503: LibRaw before 0.20-RC1 lacks a thumbnail size
range check. This affects decoders/unpack_thumb.cpp,
postprocessing/mem_image.cpp, and utils/thumb_utils.cpp. For example,
malloc(sizeof(libraw_processed_image_t)+T.tlength) occurs without
validating T.tlength.
- zlib is an optional dependency since
b63f017b06
Also update indentation in hash file (two spaces) as well as README.md
hash, no license changes:
- d1975cb0e0
- d38361b76e
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit fd50e0f93f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contains fixes for overflows when input chunks are larger than 2 GiB,
an uninitialized data access, and minor correctness and performance
improvements. There does not seem to be any CVEs filed, but there is
a security notice in the release notes at:
https://github.com/google/brotli/releases/tag/v1.0.9
Patch "0001-CMake-Allow-using-BUILD_SHARED_LIBS-to-choose-static.patch"
is rebased against the latest upstream changes.
Signed-off-by: Adrian Perez de Castro <aperez@igalia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 777bbd1b07)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
No MINIDLNA_IGNORE_CVES entry is added as no CVE has been assigned to
minidlna. Indeed, CallStranger vulnerability affect(ed) most of the UPnP
stacks (e.g. gupnp, libupnp)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 9ab9118831)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Per-package build of apparmor with apache fails on:
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apparmor/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/apxs -c mod_apparmor.c -L/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apparmor/host/bin/../x86_64-buildroot-linux-musl/sysroot/usr/lib -lapparmor
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/../../usr/build-1/libtool --silent --mode=compile /usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/bin/x86_64-linux-gcc -prefer-pic -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -Os -g2 -I/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/x86_64-buildroot-linux-musl/sysroot/usr/include -I/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/../../usr/include/apr-1 -I/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/../../usr/include/apr-1 -I/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/x86_64-buildroot-linux-musl/sysroot/usr/bin/../../../../x86_64-buildroot-lin
ux-musl/sysroot/usr/include -c -o mod_apparmor.lo mod_apparmor.c && touch mod_apparmor.slo
mod_apparmor.c:28:10: fatal error: sys/apparmor.h: No such file or directory
#include <sys/apparmor.h>
^~~~~~~~~~~~~~~~
The issue is that sys/appamor.h is not installed in the apache
per-package directory which is mangled by
APACHE_FIX_STAGING_APACHE_CONFIG, i.e.
/usr/lfs/hdd_v1/rc-buildroot-test/scripts/instance-0/output-1/per-package/apache/host/x86_64-buildroot-linux-musl/sysroot/usr/include
So implement the same workaround made on apache to replace those wrong
apache paths by apparmor paths in apxs binary and its configuration file
(i.e. config_vars.mk) as suggested by Thomas Petazzoni and Yann E. Morin
during review of the first iteration of this patch
Fixes:
- http://autobuild.buildroot.org/results/ef1fcd57e0c09a2806bf2272bb21df6d3300b45b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 3c836e5420)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
libgnutls: Fixed "no_renegotiation" alert handling at incorrect timing.
The server sending a "no_renegotiation" alert in an unexpected timing,
followed by an invalid second handshake was able to cause a TLS 1.3
client to crash via a null-pointer dereference. The crash happens in the
application's error handling path, where the gnutls_deinit function is
called after detecting a handshake failure (#1071).
[GNUTLS-SA-2020-09-04, CVSS: medium]
https://lists.gnupg.org/pipermail/gnutls-help/2020-September/004669.html
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit fb3b23220b)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit c2009e9f75
("package/linux-headers: license files hashes only valid for latest
version"), we introduced BR2_KERNEL_HEADERS_LATEST, which should only
be set for the most recent kernel headers versions.
Indeed, the COPYING file of Linux has changed before/after Linux 5.6,
causing its hash file to be different. Since linux-headers uses
linux/linux.hash as the hash file, and this hash file contains the
COPYING hash of Linux >= 5.6, we cannot use that hash for Linux
versions older than 5.6.
When newer versions of the headers than 5.4 were added, this
BR2_KERNEL_HEADERS_LATEST was not moved as it should have been. We fix
this, which fixes a legal-info failure happening when Linux kernel
headers 5.4 are used:
>>> linux-headers 5.4.61 Patching
>>> linux-headers 5.4.61 Collecting legal info
ERROR: COPYING has wrong sha256 hash:
ERROR: expected: fb5a425bd3b3cd6071a3a9aff9909a859e7c1158d54d32e07658398cd67eb6a0
ERROR: got : ee5808b032a67f587d3541099d46de34f5bec8cd5976114ba07f1299ee6001ff
ERROR: Incomplete download, or man-in-the-middle (MITM) attack
make: *** [package/linux-headers/linux-headers.mk:158: linux-headers-legal-info] Error 1
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issue:
CVE-2020-16845: Go before 1.13.15 and 14.x before 1.14.7 can have an
infinite read loop in ReadUvarint and ReadVarint in encoding/binary via
invalid inputs
https://github.com/golang/go/issues/40620
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes the following security issues:
CVE-2020-25125: Importing an OpenPGP key having a preference list for AEAD
algorithms will lead to an array overflow and thus often to a crash or other
undefined behaviour (affected: 2.2.21 / 2.2.22)
For more details, see the announcement:
https://lists.gnupg.org/pipermail/gnupg-announce/2020q3/000448.html
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
(cherry picked from commit 918a9fb455)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Cherry-pick a patch from upstream project that fixes the build when used
with a uClibc based toolchain.
Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 0e3febb75f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The ControlValue structure is currently defined with a 16-bit hole
(causing unaligned access to the numElements_ field, though that's a
separate topic).
This structure has a static assertion to ensure that its size does not
change without due care, as it forms part of our ABI and is used in
Serialisation between the pipeline handlers and IPA components.
The m68k architecture is the only target which fails this assertion,
which is likely because it can pack the structure more efficiently,
producing a different binary size.
This is likely an area we will tackle before stabilising our ABI, but
until then, disable m68k builds as libcamera is not expected to be
supported on this target.
Fixes;
- http://autobuild.buildroot.net/results/9dce26e94299a2c61bba60cbc7803926e2f85e29/
Signed-off-by: Kieran Bingham <kieran.bingham@ideasonboard.com>
[yann.morin.1998@free.fr, suggestions from Thomas:
- introduce BR2_PACKAGE_LIBCAMERA_ARCH_SUPPORTS
- propagate that to the comment
- add autobuilder reference
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit 66526e3518)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Extract from bug report:
"In usb_modeswitch Makefile dispatcher-script, dispatcher-dynlink and
dispatcher-statlink are .PHONY targets. The result is that sources are
compiled also when install targets are called.
USB_MODESWITCH_INSTALL_TARGET_CMDS calls $(MAKE) which is a call to
parallel make eg. make -j9. So the install phase can install empty
usb_modeswitch binary (happened once) if the compiler have just cleared
the binary and install command installs it before compiler writes the
binary. USB_MODESWITCH_INSTALL_TARGET_CMDS should call $(MAKE1)."
Instead of disabling parellel install, use install-common target instead
of install-{dyn,stat}link targets. Indeed, the dynamic or static
usb_modeswitch_dispatcher binary will be built by
all-with-{dyn,stat}link-dispatcher targets, there is no need to rebuild
it during the install step
Fixes:
- https://bugs.buildroot.org/show_bug.cgi?id=12911
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 345c68f04f)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Examples and tests are not needed especially because of them fails on
some architectures because it wrongly tries to use wc_Sha256FinalRaw:
CCLD tests/unit.test
/tmp/instance-0/output-1/host/opt/ext-toolchain/bin/../lib/gcc/aarch64-none-linux-gnu/9.2.1/../../../../aarch64-none-linux-gnu/bin/ld: tests/tests_unit_test-api.o: in function `test_wc_Sha256FinalRaw':
/tmp/instance-0/output-1/build/wolfssl-4.5.0-stable/tests/api.c:6504: undefined reference to `wc_Sha256FinalRaw'
Fixes:
- http://autobuild.buildroot.org/results/d5b6f97f7510874fe28c675e599be08cb8a78c7b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit 5a33de882e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
"mkdir" (without "-p") fails if the target directory exists, which means
that if alsa-utils is being reinstalled or if other files have
previously been installed in the alsa-state.d or alsa-restore.d
directories the installation will fail.
Switch to "$(INSTALL) -d" which allows us to be explicit about the
permissions and handles the case of a pre-existing directory correctly.
Signed-off-by: John Keeping <john@metanate.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
(cherry picked from commit a421da99a7)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual has a section on adding board support to upstream buildroot,
but it fails to mention some of the things we expect. Add more of them.
- Internal toolchain.
- Beautify defconfig file.
- Fixed versions for components.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Adam Duskett <Aduskett@gmail.com>
Reviewed-by: Adam Duskett <aduskett@gmail.com>
[yann.morin.1998@free.fr:
- use +monospace+ for the variables
- use _italic_ for sections in defconfig
]
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
(cherry picked from commit af6cffb64e)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is based on patch from the rockchip tree:
commit c8a337593660f27379c30248a11bf08dc8712113
Author: Jeffy Chen <jeffy.chen@rock-chips.com>
Date: Tue Nov 13 18:59:43 2018 +0800
package: cups: Add udev rules to assign usb printers' group to lp
Change-Id: Ieae17deaa7d3623e1f0e1cc826871f1719d98d88
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
but removes a hardcoded device usb vendor/id and keps only the usb
printer class.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Michael Trimarchi <michael@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 9c47056c0c)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This patch is a backport from the rockchip tree.
Author: Jeffy Chen <jeffy.chen@rock-chips.com>
Date: Tue Nov 13 18:25:34 2018 +0800
package: cups: Add lp user as default cups user
Change-Id: Ic7434fe0a7b41b86b5b8b097fa29dd9718e29aa5
Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
User lp is necessary for running the cups spooler.
Groups lpadmin grants administrative privileges to users.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
(cherry picked from commit 608c12c044)
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
2020-09-05 10:02:22 +02:00
1838 changed files with 20468 additions and 26596 deletions
In either case the resulting file will be given a .crc
extension.
menuconfig BR2_TARGET_UBOOT_ENVIMAGE
bool "Environment image"
help
Generate a valid binary environment image from a text file
describing the key=value pairs of the environment.
The environment image will be called uboot-env.bin.
if BR2_TARGET_UBOOT_ENVIMAGE
config BR2_TARGET_UBOOT_ENVIMAGE_SOURCE
string "Source files for environment"
help
Text files describing the environment. Files should have
lines of the form var=value, one per line. Blank lines and
lines starting with a # are ignored.
Multiple source files are concatenated in the order listed.
Leave empty to generate image from compiled-in env.
config BR2_TARGET_UBOOT_ENVIMAGE_SIZE
string "Size of environment"
help
Size of envronment, can be prefixed with 0x for hexadecimal
values.
config BR2_TARGET_UBOOT_ENVIMAGE_REDUNDANT
bool "Environment has two copies"
help
Some platforms define in their U-Boot configuration that the
U-Boot environment should be duplicated in two locations (for
extra safety). Check your U-Boot configuration for the
CONFIG_ENV_ADDR_REDUND and CONFIG_ENV_SIZE_REDUND settings to
see if this is the case for your platform.
If it is the case, then you should enable this option to
ensure that the U-Boot environment image generated by
Buildroot is compatible with the "redundant environment"
mechanism of U-Boot.
endif # BR2_TARGET_UBOOT_ENVIMAGE
config BR2_TARGET_UBOOT_BOOT_SCRIPT
bool "Generate a U-Boot boot script"
help
Generate a U-Boot boot script, given a file listing U-Boot
commands to be executed at boot time. The generated boot
script will be called 'boot.scr'.
if BR2_TARGET_UBOOT_BOOT_SCRIPT
config BR2_TARGET_UBOOT_BOOT_SCRIPT_SOURCE
string "U-Boot boot script source"
help
Source file to generate the U-Boot boot script.
endif
if BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG
config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
