linuxptp missing.h header implements a replacement clock_nanosleep()
function, which was used when the thread implementation was not NPTL,
because uClibc failed to provide clock_nanosleep() in such
configurations.
However, uClibc-ng has fixed this problem upstream, and has backported
this change in Buildroot in patch
package/uclibc/0002-librt-declare-clock_nanosleep-independent-of-thread-.patch
(the code is upstream and will be part of uClibc-ng 1.0.31). Due to
this, there is now a conflicting definition of clock_nanosleep()
between the C library and the linuxptp missing.h code, which manifests
itself by the following build failure:
missing.h:117:19: error: static declaration of 'clock_nanosleep' follows non-static declaration
static inline int clock_nanosleep(clockid_t clock_id, int flags,
^~~~~~~~~~~~~~~
In file included from clockadj.h:24:0,
from clockadj.c:24:
This commit fixes that by adding a patch that removes the replacement
clock_nanosleep() implementation from the linuxptp code base.
Fixes:
http://autobuild.buildroot.net/results/bf400095a853f5beb28c77a50fcffefe52c3d769/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 18e8cf159177100e69d528293f8cf6875c0b1bca (kernel)
The last Qemu kernel update [1] introduced a regresion in sh4 SCIF
serial device. Some keyboard presses are very slow to be taken into
account, perhaps not even taken into account at all. This would
explain why our test infrastructure doesn’t manage to login as root
[2][3][4].
git bisect reported a kernel patch from 4.11, increasing RX FIFO
trigger defaults value for sh-sci (H)SCIF. The kernel patch itself
looks good but the Qemu emulation is not ready to handle this new
setting.
>From Qemu (2.12.0): target/sh4/README.sh4
"Configuration of the second serial port (SCIF) is supported. FIFO
handling infrastructure has been started but is not completed yet."
We can't use the first serial port (ttySC0) because it's the second
SH UART that's emulated by Qemu.
In order to be able to test sh4 architecture with newer kernel,
revert to the old behaviour.
[1] 03fb00f217
[2] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006425
[3] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006427
[4] https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006426
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prevent creating a dangling symlink when vim is not present on the host
machine. With BR2_ROOTFS_MERGED_USR, just link to "vim", since they are
on the same directory, otherwise link to "../usr/bin/vim".
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
gnuradio needs host-python2 however there is no way to enforce this so
add a dependency on !BR2_PACKAGE_PYTHON3.
Indeed, if BR2_PACKAGE_PYTHON3 is selected, then buildroot will only
build host-python3.
This issue was not raised in the previous version of gnuradio as
host-python-cheetah was the only dependency and host-python-cheetah
enforces python2 through HOST_PYTHON_CHEETAH_NEEDS_HOST_PYTHON however
we now have host-python-six and host-python-mako dependencies and it
does not seem right to enforces python2 on those packages
Fixes:
- http://autobuild.buildroot.net/results/a502fef3e2a40f38ca63332440b0b6bd2ed11d5a
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes build issue with network-manager package when polkit package is
enabled:
CCLD clients/cli/nmcli
clients/common/clients_cli_nmcli-nm-polkit-listener.o: In function `compare_users':
nm-polkit-listener.c:(.text.compare_users+0x48): undefined reference to `polkit_unix_user_get_name'
clients/common/clients_cli_nmcli-nm-polkit-listener.o: In function `initiate_authentication':
nm-polkit-listener.c:(.text.initiate_authentication+0x1c4): undefined reference to `polkit_unix_user_get_name'
Happening with the following defconfig:
BR2_arm=y
BR2_cortex_a8=y
BR2_TOOLCHAIN_EXTERNAL=y
BR2_INIT_SYSTEMD=y
BR2_PACKAGE_NETWORK_MANAGER=y
BR2_PACKAGE_SYSTEMD_POLKIT=y
Signed-off-by: Artem Panfilov <apanfilov@spectracom.com>
[Thomas: update hash file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 51435be1f1 ("linux-firmware:
bump version to latest 8d69bab"), the hash of the LICENSE.amdgpu was
not updated as it should have been. Indeed, there was a copyright year
change in this file:
-Copyright (C) 2017 Advanced Micro Devices, Inc. All rights reserved.
+Copyright (C) 2018 Advanced Micro Devices, Inc. All rights reserved.
which changed the hash of this license file.
Fixes:
http://autobuild.buildroot.net/results/cc0e44fa854597b8a83dfdcd6435cb55af1c8571/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 51435be1f1 ("linux-firmware: bump
version to latest 8d69bab") bumped the linux-firmware package, but
forgot to update the hash file accordingly for the license files.
Especially, the WHENCE file contains the list of all licenses for the
different firmware, so it gets updated pretty much whenever a new
firmware is added or a firmware is updated.
Update its hash to fix legal-info for the linux-firmware package, and
therefore fix:
http://autobuild.buildroot.net/results/9795ac912d1bbe66386be9286f1703cdbe0a8898/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The BR2_PACKAGE_PULSEAUDIO_HAS_ATOMIC dependency of
BR2_PACKAGE_PULSEAUDIO was not properly propagated to reverse
dependencies, causing the following kconfig warning:
warning: (BR2_PACKAGE_ESPEAK_AUDIO_BACKEND_PULSEAUDIO && BR2_PACKAGE_GST_PLUGINS_GOOD_PLUGIN_PULSE && BR2_PACKAGE_GST1_PLUGINS_GOOD_PLUGIN_PULSE && BR2_PACKAGE_KODI_PULSEAUDIO && BR2_PACKAGE_MPD_PULSEAUDIO && BR2_PACKAGE_EFL_PULSEAUDIO) selects BR2_PACKAGE_PULSEAUDIO which has unmet direct dependencies (BR2_PACKAGE_PULSEAUDIO_HAS_ATOMIC && BR2_USE_WCHAR && BR2_TOOLCHAIN_HAS_THREADS && !BR2_STATIC_LIBS && BR2_USE_MMU)
This commit fixes that by propagating the dependency as it should have
been done.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To get GStreamer ready for introspection, we must first explicitly
disable gstreamer1, plugins base and plugins bad from using
introspection. If not, adding the gobject-introspection will result in
these packages failing to build because setting the
_GIR_EXTRA_LIBS_PATH variable is required.
The other gstreamer1 packages do not require setting the
_GIR_EXTRA_LIBS_PATH variable.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When building on a ppc64le host we see this error:
build/genmatch --gimple ../../gcc/match.pd \
> tmp-gimple-match.c
../../gcc/match.pd:120:1 error: expected (, got NAME
negative value by 0 gives -0, not +0. */
This was reported upstream[1] and fixed on the GCC 6 [2] and GCC 7 [3]
branches:
Backport from mainline
2018-01-10 Kelvin Nilsen <kelvin@gcc.gnu.org>
* lex.c (search_line_fast): Remove illegal coercion of an
unaligned pointer value to vector pointer type and replace with
use of __builtin_vec_vsx_ld () built-in function, which operates
on unaligned pointer values.
The patches included in Buildroot contain just the code changes, and not
the changelog, to make it easer to manage backporting.
Tested on Ubuntu Cosmic ppc64le.
[1] https://gcc.gnu.org/bugzilla/show_bug.cgi?id=86162
[2] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=261621
[3] https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=262243
Signed-off-by: Joel Stanley <joel@jms.id.au>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The acl source code uses pragmas inside functions, which is not
supported by gcc 4.4, still in use in older distributions. This commit
adds a patch that drops such pragma. Indeed, this acl is not built
with -Werror, the warning removals are not that important.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GCC 4.4 and before do not support a message associated to the
"deprecated" gcc attribute. Since such messages are not that useful in
the context of Buildroot, this commit adds a patch that removes them
in the attr source code.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In a static-only configuration, mariadb fails to build because it
tries to build a shared library:
[ 18%] Linking CXX shared module ha_spider.so
output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: output/host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/lib/libstdc++.a(eh_globals.o)(.text.__cxa_get_globals_fast+0x14): R_ARM_TLS_LE32 relocation not permitted in shared object
This is not detected by the autobuilders, because mariadb is part of a
Config.in choice, and such choices are not randomized by our current
testing infrastructure.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There are two comments inside the post install define block that show up in
the build. Fix this by moving the comments outside the block.
Signed-off-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
GHOSTSCRIPT_FONTS_TARGET_DIR is set to $(TARGET_DIR)/usr/share/fonts/gs
in ghostscript-fonts.mk. If we pass this full path to ghostscript, it
will look for fonts in $(TARGET_DIR), which doesn't exist on the
target.
Instead of /usr/share/fonts/gs, use /usr/share/fonts so ghostscript can
also access other fonts than the ones installed by ghostscript-fonts.
Signed-off-by: Thomas Ehrhardt <tehrhardt@innovaphone.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
This new package includes new binaries for i.MX8QXP.
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The help text says that BR2_DEFCONFIG will be used as input, but a
BR2_DEFCONFIG specified in the existing .config file will *not* be
used. So say explicitly that it must be specified on the command line.
Note that both "BR2_DEFCONFIG=... make defconfig" and
"make defconfig BR2_DEFCONFIG=..." will work.
While we're at it, add a semicolon to separate the two statements.
Note that this overflows the help text beyond 80 characters, but that
is already the case in many other lines.
Reported-by: Anisse Astier <anisse@astier.eu>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting initial release notes:
https://lists.x.org/archives/xorg-announce/2018-February/002835.html
"This package combines the protocol headers, which were formerly
scattered in individual packages. At this point none of them are
changing rapidly enough to justify such fine granularity, particularly
when what changes do occur tend to affect multiple extensions at once
(Present and DRI3 for example). The individual protocols are still
installed as separate pkg-config modules, and consumers should continue
to use the per-protocol package version numbers."
Some xproto_* packages are host-packages so we need to add
host-autotools-package to this package as well.
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
U-Boot SPL configures pinmuxes, clocks and other low-level devices. On
the Xilinx ZynqMP SoCs the code to do this resides in a file called
psu_init_gpl.c which is initially generated by the Xilinx development
tools. Add an option to pass these files from the outside (e.g. in the
board files).
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig using
BR2_TARGET_UBOOT_ZYNQMP_PSU_INIT_DIR. If it were in boot/uboot/ to be
applied unconditionally, it would break the build for configs using a
U-Boot version where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: add comment about U-Boot version requirements to use this
option.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In order to boot on the Xilinx ZynqMP SoCs, U-Boot SPL requires a
recent PMU firmware loaded. Instruct U-Boot to add pmufw.bin to the
boot.bin file together with U-Boot SPL, and the boot ROM will load
both.
For this to work properly, a patch to U-Boot is needed. However this
patch must be applied by each defconfig that wishes to use
BR2_TARGET_UBOOT_ZYNQMP_PMUFW. If it were in boot/uboot/ to be applied
unconditionally, it would break the build for configs using a U-Boot
version higher than 2018.7-rc1 where the patch is already applied.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Joel Carlson <joelsoncarl@gmail.com>
Reviewed-by: Joel Carlson <JoelsonCarl@gmail.com>
Tested-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas:
- indicate that this feature requires U-Boot 2018.07, since commit
c7df098a71e05dc81cee818747759e8060b59626 is needed.
- define UBOOT_ZYNQMP_KCONFIG_PMUFW only once, and instead use a
variable named UBOOT_ZYNQMP_PMUFW_PATH to store the path to the PMU
firmware]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The postgresql package is now built with --with-libxml if
BR2_PACKAGE_LIBXML2 is selected to allow the use of XML functions in
postgresql.
Signed-off-by: Daniel Deterding <dde@innovaphone.com>
Signed-off-by: Thomas Ehrhardt <tehrhardt@innovaphone.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Update the license as found in the actual source file, and remove the README
from _LICENSE_FILES as it does not contain anything regarding licenses.
Note that adding the source file as LICENSE_FILE means that the
corresponding hash will be different on every version bump.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The license of this package is not standard, it is a combination of two
sets of statements coming from two different authors.
The license resembles the original 4-clause BSD license (thus including
advertising clause) but without the third clause about endorsement.
The label 'BSD-4-Clause-like' nevertheless seems the closest match.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove patches now present upstream and drop no longer needed
autoreconf.
Signed-off-by: Trent Piepho <tpiepho@impinj.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
During investigation of adding gcrypt support in perl-net-ssh2, it became
clear that its build system is trying to find libraries via host search
paths, i.e. /usr/lib64/ etc.
This can be avoided by explicitly passing a 'lib' and 'inc' path.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
perl-net-ssh2 requires zlib. When using the openssl backend to libssh2, this
dependency is implicit via openssl, but when using the libgcrypt backend the
dependency is missing.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove first two patches (already in version)
- Rename third patch so it is now the first one
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As kernel wireless wiki doesn't seem to have the doc about wl12xx
calibration, points to a backup of the old site.
Signed-off-by: Julien BOIBESSOT <julien.boibessot@armadeus.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a bug-fix release that fixes a couple memory leaks and bugs in
python bindings discovered in the v1.1 release.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
arm64 systems support SMBIOS, so update the dmidecode config
to allow building dmidecode for arm64.
Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump U-Boot to 2018.05 version and kernel to 4.17.8.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8 started warning about function aliases that have a non-matching
prototype. This seems rather useful in general, but it causes tons of
warnings in the Linux kernel, where we rely on abusing those aliases
for system call entry points, in order to sanitze the arguments passed
from user space in registers.
See https://gcc.gnu.org/bugzilla/show_bug.cgi?id=82435
Disable the attribute-alias warning introduced by gcc-8 by adding
-Wno-attribute-alias to KCFLAGS.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add optional build of rfcomm which requires readline.
Update license hash as authorship has been updated in the license file.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The nghttp2 package has recently been added to buildroot. When
enabled, this adds support for HTTP2 to libcurl.
By default, libcurl configure script will enable HTTP2 if the library
is found using pkg-config. Adding this option makes the build
consistent.
Signed-off-by: Michaël Burtin <michael.burtin@netgem.com>
Signed-off-by: Anisse Astier <anisse.astier.ext@netgem.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Allow user to override the hardcoded dtb name by using
BR2_ROOTFS_POST_SCRIPT_ARGS.
The only user of this script, configs/freescale_imx8mqevk, is updated
accordingly.
Cc: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With cmake packages, we are only using TARGET_LDFLAGS for executables
and not for shared libraries.
This patch adds CMAKE_SHARED_LINKER_FLAGS and
CMAKE_MODULE_LINKER_FLAGS to the cmake toolchain file so that
buildroot TARGET_LDFLAGS are used for shared and module libraries.
Signed-off-by: Damien Thébault <damien.thebault@vitec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The bind configure.in now checks for "${with_zlib}/include/zlib.h".
Remove the redundant "include/".
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
>From the release note:
This is a point release over the previous 2.31 version, which was
necessary as a source file was accidentally omitted from that
release.
This release also contains a fix for PR gold/23409 where the gold
linker could end up creating duplicate copies of some symbols.
https://sourceware.org/ml/binutils/2018-07/msg00286.html
Signed-off-by: Romain Naour <romain.naour@smile.fr>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
When the output directory is nested under a long path name, calling the
gdbus-codegen, glib-genmarshal, or glib-mkenums scripts throws the
error:
> '/usr/bin/env: /...: No such file or directory'
This is because libglib2 uses the absolute path to the python
interpreter for its shebang statements, and shebangs have a max length
of 127 chars[1]. A long absolute path will be cut off and appear as a
missing file.
Since the host Python is present in the $PATH passed to all packages, we
can copy the workaround from Yocto and just use the python interpreter
in $PATH[2]. However, 'python' is used instead of 'python3' as the
scripts are compatible with both.
[1] https://linux.die.net/man/2/execve
[2] http://cgit.openembedded.org/openembedded-core/commit/?id=eef7883587acc933d6f34b559ec03ff84d18573b
Signed-off-by: Brandon Maier <brandon.maier@rockwellcollins.com>
Signed-off-by: David Owens <david.owens@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Starting from kernel version 4.15, Linux supports loading
regulatory.db and regulatory.db.p7s files directly from /lib/firmware,
without the need of crda. If the kernel can't load those files it'll
fallback to using crda, but the direct way is preferred.
This patch copies those those files under /lib/firmware. The use of
crda shouldn't be necessary with kernels of 4.15 or later.
Signed-off-by: Christoph Engelbert <me@noctarius.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A C++ Web Framework built on top of Qt, using
the simple approach of Catalyst (Perl) framework.
Signed-off-by: Daniel Nicoletti <dantti12@gmail.com>
[Thomas: add entry in DEVELOPERS file, move cmake-package invocation
to the end of .mk file, select BR2_PACKAGE_OPENSSL.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add support for flashing the u-boot-dtb.imx binary in the SD card
when a target selects BR2_TARGET_UBOOT_FORMAT_DTB_IMX.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-5738: When recursion is enabled but the allow-recursion
and allow-query-cache ACLs are not specified, they should be limited to
local networks, but they were inadvertently set to match the default
allow-query, thus allowing remote queries.
Update license file hash; copyright year update.
Add reference to tarball signature key.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Host GDB suffers a serious problem: pressing backspace (or ^W ^U or any other
"delete" key) results in a plain space being printed instead, making the
command prompt almost completely unusable.
That's because it's using host-ncurses, which embeds a path for the terminfo
database into the library itself. That path ends up being something like
/home/hollisb/buildroot.git/output/host/share/terminfo, which obviously doesn't
generally exist other hosts. ('relocate-sdk.sh' cannot and does not edit
binaries like libncurses.so.6, so doesn't resolve this problem.)
/usr/share/terminfo is a far better path to use, since it almost certainly
exists on the host. Theoretically, it could be from a different ncurses version
with incompatible terminfo database format, but this doesn't seem to be a
problem in practice. (Future patches could address the theoretical problem if
it actually appears in real life.)
This change allows buildroot's host gdb, which uses ncurses 6.x, to work on
RHEL5, RHEL6, and RHEL7, which all provide terminfo from ncurses 5.x.
Signed-off-by: Hollis Blanchard <hollis_blanchard@mentor.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes assembler failure when compiling for ARC700 only:
------------------------>8---------------------
{standard input}: Assembler messages:
{standard input}:213: Error: operand out of range (128 is not between -128 and 127)
make[2]: *** [scripts/Makefile.build:317: net/ipv4/xfrm4_mode_tunnel.o] Error 1
------------------------>8---------------------
This is an upstream fix scheduled for the next release, see
5afc07eeb1
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds the capnproto package. This also builds a host variant to generate
the capnp compiler that can be used to compile message definitions into
C++ code. Includes a patch from upstream to fix an issue with uclibc.
Signed-off-by: Koen Martens <gmc@sonologic.nl>
Signed-off-by: Joel Carlson <JoelsonCarl@gmail.com>
[Thomas: only link with -latomic when BR2_TOOLCHAIN_HAS_LIBATOMIC=y.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Link '[' directly to the coreutils binary instead of going through
'test'.
Suggested-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Using uboot version 2017.11 creates an sd card image which fails to
boot with the following error:
Missing DTB
### ERROR ### Please RESET the board ###
Updating tinkerboard default configuration to use latest uboot release
2018.07 creates a sd card image which boot fine.
Signed-off-by: Yannis Damigos <ydamigos@iccs.gr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, when the site method is explicitly set to a SCM other than
git, the main download is correctly excluded from being hash-checked.
But when the site method is inferred from the site uri, the download
from a SCM other than git is wrongly being hash-checked.
Fix this by moving the code that excludes SCM methods from hash-check
below the code that infers the site method.
Currently there is no package in the tree that uses inferred site
method, and that is why the autobuilder didn't caught this. We had
packages using inferred site method in the past, the last one was
'expect', but since they didn't have a hash file (for a license or
extra-download for example) the build didn't error out.
Signed-off-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Luca Ceresoli <luca@lucaceresoli.net>
Tested-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The 2017 MinnowBoard Turbot skews no longer use the Realtek 8169
Ethernet chip. The Turbot D0 uses The Intel I211, the Turbot Dual
Ethernet has an I210 (quad-core) or I211 (dual-core).
Add CONFIG_IGB to the Linux config but keep the Realtek 8169 support
to avoid breaking older boards
Tested on Turbot D0, lspci -k shows the igb driver is used:
03:00.0 Class 0200: 8086:1539 igb
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-0500: curl might overflow a heap based memory buffer when
sending data over SMTP and using a reduced read buffer.
Drop upstream patch.
Add reference to tarball signature key.
Drop CRYPTO_lock seed. Removed from configure script since 7.45.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The current version of attr uses a canned custom buildsystem, that
is borked in quite a few ways (no support for static, overwrites
destination files without unlinking...)
There has been a release recently-ish, with a complete overhaul of
the buildsystem. We can now drop all our patches.
The option to disable NLS has changed, so update accordingly.
Fixes: #10986
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
[Arnout: use the original SITE instead of a specific mirror]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Of most interest is the build system overhaul, and the drop of the
dependency on attr-provided <attr/xattr.h> in favour of the
system-provided <sys/xattr.h>.
That last bit meaning that we will be able to bump attr.
We can drop our patches: static is now natively supported thanks to
the use of libtool, and the internal symbols patch was a backport,
and finally, our install patch is superseded by the use of autotools.
The option to disable NLS has changed, so update accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
As suggested by Arnout during the review of
http://patchwork.ozlabs.org/patch/934589, add a mechanism to detect a
missing boost select by checking that we do not install a boost library
which hasn't been selected by the user.
To manage a change of boost configuration by the user between two
builds, add a BOOST_PRE_INSTALL_TARGET_HOOKS to remove all boost
libraries before installing them.
Also, use ls with a wildcard instead of test to avoid trying to guess
library names if boost layout is set to tagged or versionned (the
wildcard will also help us to manage shared or static library)
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Currently, the stdout is consigned to oblivion, while the stderr is not
redirected at all. So, when the configuration under test redefines a
symbol, like is the case when testing busybox for example, there is an
ugly warning.
So, just redirect both stdout and stderr to the logfile.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Tested-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Add a defconfig for the Olimex A10-OLinuXino-LIME, reusing most
of the A20-OLinuXino-Lime and A13-OLinuXino files (sym links).
The configurations for Olimex A10-OLinuXino-LIME feature:
- U-Boot 2018.03
- Mainline Linux kernel 4.14.26
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
[Arnout: remove commented-out BR2_ARM_EABIHF=y (which is default)]
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
* chacha20poly1305: use slow crypto on -rt kernels on arm too
Leftover from the last commit of the previous snapshot that we forgot to
handle.
* tools: getentropy requires macOS 10.12
Small build time fixup for old versions of macOS.
* queueing: remove useless spinlocks on sc
* queueing: re-enable preemption periodically to lower latency
* simd: encapsulate fpu amortization into nice functions
* simd: no need to restore fpu state when no preemption
This will improve general system latency on preempt-enabled systems, like
desktops.
* dns-hatchet: apply resolv.conf's selinux context to new resolv.conf
Fixes wg-quick's dns hatchet on CentOS.
* qemu: bump default kernel
By bumping to 4.17.2, we actually uncovered a bug in the SLUB allocator, which
upstream is now fixing: https://lkml.org/lkml/2018/6/18/1407
* noise: take locks for ss precomputation
* netlink: maintain static_identity lock over entire private key update
Minor locking correctness fixes and optimizations.
* noise: wait for crng before taking locks
We now make sure that an outgoing packet which needs a potentially unseeded
rng won't block a call to wg(8), which takes similar locks for retrieving
data.
* receive: drop handshake packets if rng is not initialized
If the rng is unseeded, we drop incoming handshake packets, so that it's not
possible for an attacker to fill the handshake queue thereby provoking
cookies.
* ratelimiter: mitigate reference underflow
* ratelimiter: do not allow concurrent init and uninit
Minor correctness and hardening fixes, which don't fix anything particular in
WireGuard, but might be useful if our ratelimiter is ever used elsewhere.
* compat: use stabler lkml links
* poly1305: add missing string.h header
Minor fixups.
* receive: don't toggle bh
The last snapshot caused a big performance regression, which we partially
revert here. This general matter, though, will be revisited in the future,
perhaps by switching to NAPI.
* main: test poly1305 before chacha20poly1305
* poly1305: give linker the correct constant data section size
While the default bfd linker did the right thing, gold would sometimes merge
section incorrectly because of an incorrect section length field, resulting in
wrong calculations.
* simd: add missing header
Fixes a compile error on a few odd kernels.
* global: fix a few typos
* manpages: eliminate whitespace at the end of the line
* tools: fix misspelling of strchrnul in comment
Cosmetic fixups.
* global: use ktime boottime instead of jiffies
* global: use fast boottime instead of normal boottime
* compat: more robust ktime backport
We now use the equivalent of clock_gettime(CLOCK_BOOTTIME) for doing age
checks on time-limited objects, such as ephemeral keys, so that on systems
where we don't clear before sleep (like Android), we make sure to invalidate
the objects after the proper amount of time, taking into account time spent
asleep.
* wg-quick: android: prevent outgoing handshake packets from being dropped
Recent android phones block outgoing packets using iptables while the system
is asleep. This makes sense for most services, but not for a tunnel device
itself, so we work around this by inserting our own iptables rule.
* device: print daddr not saddr in missing peer error
* receive: style
Debug messages now make sense again.
* wg-quick: android: support excluding applications
Android now supports excluding certain apps (uids) from the tunnel.
* selftest: ratelimiter: improve chance of success via retry
* qemu: bump default kernel version
* qemu: decide debug kernel based on KERNEL_VERSION
Some improvements to our testing infrastructure.
* receive: use NAPI on the receive path
This is a big change that should both improve preemption latency (by not
disabling it unconditionally) and vastly improve rx performance on most
systems by using NAPI. The main purpose of this snapshot is to test out this
technique.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add license and license hash.
Change git download site. The git download method does not work with
BR2_KERNEL_MIRROR that is set to https://cdn.kernel.org/pub by default.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
attr and busybox may each install setfattr, so attr must be installed
before busybox.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since netcat would be installed before busybox, we don't need to remove
a pre-installed 'nc' anymore.
If another netcat implementation (e.g. netcat-openbsd) is also enabled,
there is no way to tell which would win in the end, especially when we
add TLPB, in which case that will be forbidden.
So, we don't need to remove anything anymore.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We only need that dependency when nmap's ncat is enabled.
For consistency, we add a dependency on nmap, not a suboption of it,
to have a dependency list in busybox that is only about packages, and
directly associates the upper-case package variable to the lower-case
package name, e.g. NMAP <-> nmap.
Thus, if BR2_PACKAGE_NMAP_NCAT is selected, we have a redundant
dependency. But that doesn't hurt and it really simplifies things.
Signed-off-by: Yann E. MORIN <yann.morin.1998@free.fr>
Reviewed-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
In so doing, we must now ensure that busybox does not overwrite
the startup script already installed by syslog-ng.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The two patches are still needed, with the second needing a slight
refresh around the edge.
Since upstream has now full support to perform a noclobber install, drop
our BUSYBOX_NOCLOBBER_INSTALL hook and use the new install rule.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
gnutls support has been added since version 1.5.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
openssl support has been added since version 1.5.0
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
- Remove patch (already in version)
- Update hash of license file: AES section has been removed:
303fde909f
The AES section was BSD-3-Clause as well, so nothing changes in
LIBZIP_LICENSE.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Increase the filesystem size for raspberrypi3 by setting
BR2_TARGET_ROOTFS_EXT2_SIZE to "120M". The filesystem for
raspberrypi3_64 has the same size. The size is so large because the
kernel config enables many many modules.
Fixes:
Copying files into the device: __populate_fs: Could not allocate block in ext2 filesystem while writing file "services"
mkfs.ext4: Could not allocate block in ext2 filesystem while populating file system
This error is not reproducible, it seems to depend on e.g. directory
ordering.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
We need to install polkit before systemd if we want to enable
polkit integration, because systemd will not install polkit
policy files unless it finds polkit-gobject-1.
Signed-off-by: Asgeir Bjarni Ingvarsson <asgeir@appdynamic.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Some i.MX boards which use device tree to describe the hardware
for U-Boot generate a u-boot-dtb.imx binary.
Introduce the BR2_TARGET_UBOOT_FORMAT_DTB_IMX option to
handle such case.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The pigz website seems to only host the latest release tarball.
Chances are that the 2.4 tarball will disappear when 2.5 comes out.
Instead, use the Github tarballs provided by the developer. Comparison
between the 2.4 / v2.4 tarballs shows that only the .gitignore file is
added.
Suggested-by: Alfredo Alvarez Fernandez <alfredo.alvarez_fernandez@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The original site www.liblogging.org has been taken down because of the
new European data protection regulation (GDPR), to which it was not
compliant.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
If Buildroot is run from a folder containing a '@' in the path, automake
will fail since the aclocal Perl script will interpret what is after the
'@' as an array in its system include paths. This was fixed in automake
1.16.1.
Signed-off-by: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Since commit 6be346cec4,
DOMOTICZ_CXXFLAGS is not set anymore so remove it
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
The BR2_PACKAGE_ALSA_UTILS_BAT option currently selects
BR2_PACKAGE_FFTW. However, it turns out that fftw is not a mandatory
dependency to build alsabat, just an optional dependency.
This commit therefore turns this dependency into an optional
one. However, it is not just FFTW that is necessary, but the simple
precision version of FFTW, so the optional dependency takes this into
account.
We take this opportunity to extend the Config.in help text for
BR2_PACKAGE_ALSA_UTILS_BAT.
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The zstd (de)compression tool may be used in post-image scripts to
compress certain elements of the final image.
In order to allow that, make host-zstd selectable in the 'Host
utilities' menu, and build the binary in addition to the library.
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Perf profiling cannot be used if CONFIG_PERF_EVENTS is not enabled in the
kernel configuration. Similar to other tools, like ktap, we can enable the
right options automatically.
Signed-off-by: Jan Heylen <jan.heylen@nokia.com>
Signed-off-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the exim package was added, it included a template for the
build-time configuration file Local/Makefile in the package directory.
In commit 8956779d5d (exim: use a more standard build-time
configuration), this template file was replaced with the EDITME
template file included in the exim sources. However, that commit did
not remove Buildroot's Local-Makefile.
Since this file is no longer used, remove it.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Cc: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dropbear by default enables a number of algorithms that are now considered
insecure and should only be used when legacy support is required:
3DES encryption
Blowfish encryption
SHA1-96 message integrity
CBC encryption mode
DSA public keys
Diffie-Hellman Group1 key exchange
So disable them by default, but add a config option for bringing them back.
Furthermore the Blowfish legacy algorithm is unconditionally disabled
Signed-off-by: Stefan Sørensen <stefan.sorensen@spectralink.com>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Reviewed-by: Thomas De Schampheleire <thomas.de_schampheleire@nokia.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel 4.17.4 contains commit 32c319d4f120 ("pinctrl: devicetree: Fix
pctldev pointer overwrite"), which fixes camera support
on imx6-sabresd board, so bump to this kernel version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Kernel 4.17.4 contains commit 32c319d4f120 ("pinctrl: devicetree: Fix
pctldev pointer overwrite"), which fixes audio support
on imx53loco board, so bump to this kernel version.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Display the dependencies comment only when network-manager is enabled.
Otherwise, a toolchain configuration change would not make the package
selectable.
Cc: Pierre Ducroquet <pinaraf@pinaraf.info>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Display the dependencies comment only when modem-manager is enabled.
Otherwise, a toolchain configuration change would not make the package
selectable.
Cc: Pierre Ducroquet <pinaraf@pinaraf.info>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
modemmanager-qt is a simple Qt wrapper on the ModemManager API.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- fix commit title
- update to 5.47
- add hash for license file
- add missing dependency on qt5base
- add missing dependency on Qt5 DBus module
- use "depends on" instead of "select" for modemmanager dependency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
A few new features have been add and a lot of bugs have been fixed in
minor release Vim 8.1.
Signed-off-by: Leon Anavi <leon.anavi@konsulko.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes:
http://autobuild.buildroot.net/results/15cc6523a42bf66508b2b37fd1fcb74625561ec2/
btrfs-progs 'make install' installs headers under $(prefix)/include/btrfs,
but our patch to also install headers for 'install-static' installed
directly into $(prefix)/include, confusing other packages as btrfs-progs
headers have very common names such as version, sizes.h, list.h, ioctl.h, ..
Fix it by adjusting the patch to also install under $(prefix)/include/btrfs.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add the i686 package list to install when using pre-built 32 bits
binaries with a redhat/fedora host distribution (glibc.i686 and
zlib.i686).
Signed-off-by: David De Grave (Essensium/Mind) <david.degrave@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since Qt 5.11, the headers are not installed anymore.
The issue comes from a update in qt5base [1] which is not backported to
qt5webkit because it is not officially supported anymore by Qt.
Fixes build issues with qt5webkit-examples that requires QtWebKit
headers:
In file included from main.cpp:42:
window.h:46:10: fatal error: QWebElement: No such file or directory
#include <QWebElement>
^~~~~~~~~~~~~
compilation terminated.
[1]: 9c4c136bc9
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit regenerates the patch
0001-poco-add-the-staging-path-to-search-path.patch to not have
numbering.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Now that we dropped support for blackfin, we no longer have any
architecture that supports FDPIC, so BR2_ARCH_HAS_FDPIC_SUPPORT
is never selected, so we can't select BR2_BINFMT_FDPIC.
Drop all of that now.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
systemd can use libpcre2 when available, so this commit adds the
detection of this library.
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since commit db860d7837 ("systemd: bump
to 236, convert to meson"), we're no longer using the autotools build
system, and have switched to meson. Therefore, patching m4 files is no
longer useful.
Suggested-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
* remove upstreamed patches
* refresh patch 0002 which didn't apply cleanly
* update patch 0001 to catch more uses of agetty
* the README file hash has changed because some parts of this file
were modified between v237 and v239, but the modifications are not
related to licensing aspects
Signed-off-by: Jérémy Rosen <jeremy.rosen@smile.fr>
[Thomas: regenerate patches with less "noise", update README file
hash.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
WebEngine is a big project to build. It uses ninja which is a build
system that does everything in parallel[1].
Builds are always run in parallel, based by default on the number of
CPUs your system has. Underspecified build dependencies will result in
incorrect builds.
QtWebEngine does not propagate the parallel flag from the running
instance of make to ninja. Thus, all the machine cores are used to build
this single project.
make -j 10 -> ninja -j # all cores
This behavior disrupts powerful machines which are setup to build many
projects in parallel. Even worse, the build fails on machines where the
ratio CPU-cores / amount of RAM (including swap) is not appropriate. g++
may have not enough of memory to build all those files in parallel.
Unfortunatly, the target `run_ninja' is hardcoded in the Makefile
src/core/Makefile.run_gn; there is no way to propagate flags using a
variable through the make command-line.
run_ninja:
/home/gportay/src/buildroot/output-qt5.11/build/qt5webengine-5.11.1/src/3rdparty/ninja/ninja
-C /home/gportay/src/buildroot/output-qt5.11/build/qt5webengine-5.11.1/src/core/release QtWebEngineCore
Luckily, the Qt gn_run.pro[2] can hardcode ninja extra flags through the
variable NINJAFLAGS when the Makefile is generated (which is performed
during the build and not during configure step).
This commit sets the NINJAFLAGS using the variable PARALLEL_JOBS to limit
the number of cores used by ninja.
Fixes:
virtual memory exhausted: Cannot allocate memory
[1]: https://ninja-build.org/manual.html#_comparison_to_make
[2]: https://github.com/qt/qtwebengine/blob/v5.11.1/src/core/gn_run.pro#L49-L53
CC: Damien Riegel <damien.riegel@savoirfairelinux.com>
CC: Jean-François Têtu <jean-francois.tetu@savoirfairelinux.com>
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 52282828f0
("package/network-manager: add patches to build with kernel headers
3.2"), network-manager was changed to build with kernel headers as old
as 3.2, instead of 3.7 before. The dependency was changed accordingly,
but the Config.in comment was not.
This commit fixes this inconsistency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following check-package warning:
package/gstreamer1/gst1-plugins-good/gst1-plugins-good.mk:193: consecutive empty lines
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
networkmanager-qt is a simple Qt wrapper on the NetworkManager API.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- Update to version 5.47.
- Instead of selecting network-manager, depend on it, it avoids
replicating all its complicated dependencies, and it's pretty
obvious if you want to use network-manager that you need network
manager.
- Needs Qt5Dbus support, so added a select BR2_PACKAGE_QT5DBUS, and
propagated the corresponding dependencies.
- Add missing dependency on qt5base in
KF5_NETWORKMANAGER_QT_DEPENDENCIES
- add hash for license file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
kf5-extra-cmake-modules contains several additional CMake modules used
by the other KF5 packages. It does not install anything on the target
and contain only CMake files for the host.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- update to version 5.47
- add hash for license file]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
KDE Frameworks 5 is a set of libraries built on the Qt framework
providing a lot of powerfull classes and solutions for developers
building Qt applications.
Unlike the previous KDE libraries, they are split in tiny packages,
reducing dependencies as much as possible, making them usable even for
embedded projects.
This first commit introduce the kf5 packages folder.
Signed-off-by: Pierre Ducroquet <pinaraf@pinaraf.info>
[Thomas:
- Needs Qt >= 5.8, so added a dependency on
BR2_PACKAGE_QT5_VERSION_LATEST
- Update to version 5.47.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The boost fiber module uses the boost context module, so it should
select it.
Due to this, the boost fiber module inherits the dependencies of boost
context: it needs exception_ptr handling, and is only available on the
architectures where boost context is supported.
Fixes:
http://autobuild.buildroot.net/results/56509d315defb95d4ac6e278a9d40cd98f61baa7
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use only one comment for both gcc bug dependencies.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Rework boost-context dependencies and manage them through the hidden
BR2_PACKAGE_BOOST_CONTEXT_ARCH_SUPPORTS
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The following patches have been updated to apply on 1.15.0:
0003-auto-set-ngx_feature_run_force_result-for-each-featu.patch
0006-auto-lib-openssl-conf-use-pkg-config.patch
The follow patch has been removed, because it was applied upstream:
0009-auto-lib-conf-fix-PCRE-condition-WRT-the-http-and-ht.patch
The license file hash has changed because the copyright years were
updated in the LICENSE file:
- * Copyright (C) 2002-2017 Igor Sysoev
- * Copyright (C) 2011-2017 Nginx, Inc.
+ * Copyright (C) 2002-2018 Igor Sysoev
+ * Copyright (C) 2011-2018 Nginx, Inc.
Signed-off-by: Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
[Thomas: drop unneeded patch updates, improve commit log.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 1e3738db42 ("package/gdb: rework
dependency for C++11") erroneously added duplicate dependencies in
package/gdb/Config.in related to gcc 4.8 and C++ dependency.
One copy of those dependencies was below the select causing a
check-package warning.
Fixes:
package/gdb/Config.in:28: attributes order: type, default, depends on, select, help (http://nightly.buildroot.org/#_config_files)
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We don't carry a git-formatted patch, because upstream is in fact a
collection of git trees, while the release tarball is an aggregate
of those repositories. Thus, the layout is different between the
tarball and the SCM...
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Steve Kenton <skenton@ou.edu>
[Thomas:
- add host-pkgconf as a dependency of host-xorriso, since it's needed
for autoreconf to work
- drop HOST_XORRISO_AUTORECONF = YES, since it's implied by
XORRISO_AUTORECONF = YES.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-9918: mishandle certain "expected dictionary key but
found non-name object" cases, allowing remote attackers to cause a
denial of service (stack exhaustion)
https://github.com/qpdf/qpdf/issues/202
Drop local SHA256 hash since we use upstream provided SHA512.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The tarball is now at github.
Switch to .tar.xz, that's the only format that upstream provides.
Add a note on tarball signature and key.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This reverts commit 1e2a8d4111.
Since version 1.0.30, uClibc-ng release supports the missing functions
even for Linuxthreads, therefore the dependency on NPTL is no longer
needed.
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Disable password file authentication, since it's not possible to have
both at once.
- Install a /etc/pam.d/sshd file, based on the one installed by openssh.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Reviewed-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The configure.ac script simply uses PKG_CHECK_MODULES(), so there is
not --enable/--disable option.
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When the host has a DB library installed, namely LMDB, host-heimdal
will detect it and try to use, resulting in a build failure due to
missing symbols.
Really disable all the DB backends, we don't need them.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All pre-built Buildroot toolchains have been rebuilt with Buildroot
2018.05, so this commit updates the corresponding configuration
fragments to make sure the autobuilders use the new toolchains.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The compiler g++ reports an error when the header arm_acle.h is
included from version 7.
This patch backports the bugfix upstreamed [1] for gcc-7 and gcc-8.
Fixes:
In file included from ../../include/QtCore/5.10.1/QtCore/private/../../../../../src/corelib/tools/qsimd_p.h:333,
from ../../include/QtCore/5.10.1/QtCore/private/qsimd_p.h:1,
from global/qlogging.cpp:58:
/home/gportay/src/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/8.1.0/include/arm_acle.h: In function ‘void __arm_ldc(unsigned int, unsigned int, const void*)’:
/home/gportay/src/buildroot/output/host/lib/gcc/arm-buildroot-linux-gnueabihf/8.1.0/include/arm_acle.h:48:46: error: invalid conversion from ‘const void*’ to ‘const int*’ [-fpermissive]
return __builtin_arm_ldc (__coproc, __CRd, __p);
^~~
<built-in>: note: initializing argument 3 of ‘void __builtin_arm_ldc(unsigned int, unsigned int, const int*)’
...
Makefile:196: recipe for target 'sub-corelib-make_first' failed
make[3]: *** [sub-corelib-make_first] Error 2
Makefile:48: recipe for target 'sub-src-make_first' failed
make[2]: *** [sub-src-make_first] Error 2
package/pkg-generic.mk:229: recipe for target '/home/gportay/src/buildroot/output/build/qt5base-5.10.1/.stamp_built' failed
make[1]: *** [/home/gportay/src/buildroot/output/build/qt5base-5.10.1/.stamp_built] Error 2
Makefile:16: recipe for target '_all' failed
make: *** [_all] Error 2
[1]: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=81497
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Reviewed-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes following linking error with uClibc-ng:
/home/peko/autobuild/instance-0/output/host/lib/gcc/powerpc-buildroot-linux-uclibc/7.3.0/libgcc.a(unwind-dw2-fde-dip.o):
In function `_Unwind_Find_FDE':
/home/peko/autobuild/instance-0/output/build/host-gcc-final-7.3.0/build/powerpc-buildroot-linux-uclibc/libgcc/../../../libgcc/unwind-dw2-fde-dip.c:469:
undefined reference to `dl_iterate_phdr'
collect2: error: ld returned 1 exit status
Since uClibc-ng 1.0.18 a circular dependency between libc and libgcc
exist, when static linking is used. It can be resolved by the compiler
when -static is correctly passed in the linking step.
So use TARGET_CONFIGURE_OPTS to pass CC as well as LDFLAGS to make
Fixes:
- http://autobuild.buildroot.net/results/d9f0311538c8db1196839e36af3f6ef4e403be2b
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With the latest ARC toolchain arc-2018.03 builds of "trousers" and
"tpm-tools" packages perform without errors.
Lets enable these packages for ARC.
With the exception, building tpm-tools for ARC770/750 requires to pass
"-mno-compact-casesi" as it was made for trousers before:
see patch f4cd8ceb9c "trousers: Pass "-mno-compact-casesi" when
building for ARCv1".
This change is a temporary workaround and the feature is going to be
fixed in the next ARC toolchain release version.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Sven Neumann <neumann@teufel.de>
[Thomas:
- add entry to DEVELOPERS file
- add missing dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_64735
- rework comments on the dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
dehydrated is an ACME client written in bash. It should be able to run
under zsh as well, but this hasn't been tested so it isn't enabled for
now.
Normally, we would want an init script to start dehydrated, and an
example configuration file. However, it is very difficult to do this
in a generic way in Buildroot:
- we normally don't have cron running;
- we have no standard location for webroot;
- we have no standard location for certificates;
- we have no standard way to restart/reload the webserver.
So instead, provide brief documentation of how to use dehydrated in the
help text.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Hidapi source uses iconv_open UTF-16 conversion [1] which requires
gconv libararies when buiding with glibc in order to successfully
find serial number, manufacturer and product strings [2].
Use select in the config file to autmatically select gconv libararies
for inclusion on the target when building with glibc
Tested with ./utils/test-pkg -c hidapi.cfg -p hidapi and hidapi.cfg file
contents:
BR2_PACKAGE_HIDAPI=y
BR2_PACKAGE_EUDEV=y
BR2_ROOTFS_DEVICE_CREATION_DYNAMIC_EUDEV=y
BR2_USE_MMU=y
BR2_USE_WCHAR=y
Also tested on x86-64 build target with application using hidapi
[1]: a6a622ffb6/libusb/hid.c (L446)
[2]: https://www.silabs.com/community/interface/forum.topic.html/cp2114_linux_sta-RtWg
Signed-off-by: Dan Walkes <danwalkes@trellis-logic.com>
Tested-by: Dan Walkes <danwalkes@trellis-logic.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- change legacy select BR2_PACKAGE_GST1_PLUGINS_BAD_PLUGIN_AUDIOMIXER to
new select BR2_PACKAGE_GST1_PLUGINS_BASE_PLUGIN_AUDIOMIXER
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- add upstream patch to fix the following compile failure:
gstvaapipluginutil.c:259:12: error: ‘GstGLDisplay’ undeclared (first use in this function); did you mean ‘GstVaapiDisplay’?
(GstGLDisplay **) & plugin->gl_display,
^~~~~~~~~~~~
GstVaapiDisplay
gstvaapipluginutil.c:259:12: note: each undeclared identifier is reported only once for each function it appears in
gstvaapipluginutil.c:259:27: error: expected expression before ‘)’ token
(GstGLDisplay **) & plugin->gl_display,
^
Also add hash for license file.
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Update to 1.14.1]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These are grouped together because several plugins have been re-arranged and
there is no way to individually update each plugin package.
Changes:
Add the following to gst1-plugins-base and remove them from plugins-bad:
- opengl
- gles2
- glx
- egl
- x11
- dispmanx
- audiomixer
Add the following to plugins-good and remove them from plugins-ugly:
- lame
- mpg123
moved --disable-qt from plugins-bad to plugins-good
Delete upstream patch from gst1-plugins-ugly ([1])
- 0001-x264enc-fix-build-with-newer-x264-with-support-for-m.patch
Also add hashes for the license files.
[1] https://cgit.freedesktop.org/gstreamer/gst-plugins-ugly/commit/?id=83c38dc44622611c1f67dd26e4cb383c5aef90f6
Signed-off-by: Adam Duskett <aduskett@gmail.com>
[Upate to 1.14.1]
[Removed legacy lame/mpg123 option, add Config.in.legacy handling]
[remove leftover audiomixer handling from gst1-plugins-bad.mk]
[remove upstream patch from gst1-plugins-ugly]
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit adds a patch to the host package patchelf to fix an issue
with endianness when the --make-rpath-relative option is
specified. Currently, patchelf does not take into account the
architecture of the target ELF when it performs the fixup on the
RPATH. Thus, if it differs from the host in endianness, the RUNPATH
field will be invalid. The patch fixes the bug reported here:
https://bugs.busybox.net/show_bug.cgi?id=11101
Signed-off-by: Bryce Ferguson <bryce.ferguson@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also, add upstream patch for not fail builds on 32bit architectures.
The patch will be removed when bumping to v2018.7.
Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
[Thomas:
- drop host-meson dependency, unneeded since the meson-package
infrastructure is used
- add -Ddbus_daemon=/usr/bin/dbus-daemon, otherwise at-spi2-core
meson build system tries to find dbus-daemon on the host machine,
where it may not be available.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update the kernel version to 4.17.2.
Update U-Boot version to 2018.05.
Migrate to U-Boot generic distro configuration which is easier than the
hand written boot script.
Improve the 'dd' command example in readme.txt.
Cc: Jan Kundrát <jan.kundrat@cesnet.cz>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
https://sourceware.org/ml/gdb-announce/2018/msg00001.html
gdb 8.1 has a new optional dependency on mpfr, which according to the
NEWS file:
GDB now uses the GNU MPFR library, if available, to emulate target
floating-point arithmetic during expression evaluation when the
target uses different floating-point formats than the host. At
least version 3.1 of GNU MPFR is required.
So for the target gdb, this is unnecessary, and therefore we
forcefully disable mpfr support by passing --without-mpfr.
For the host gdb, it would potentially be useful, but since it's a new
feature that isn't essential, we for now keep it disabled as well. An
option may be added later if needed.
To avoid gnulib issues with uClibc/musl, we need to pass additional
configure/make variables, like is done in OpenEmbedded [1].
[1] http://git.openembedded.org/openembedded-core/tree/meta/recipes-devtools/gdb/gdb_8.1.bb?id=02664a8dcd1ebb6cd77248e1b97a78390ea06033#n9
We re-add the same patches as the ones present for gdb 8.0.1, except
0004-nat-linux-ptrace.c-add-missing-gdb_byte-cast.patch, which was
merged upstream.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
[Thomas: change mpfr handling.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As we are about to switch to 8.0 as the default gdb version, we
need to adjust how the gdb dependencies are handled. Indeed, from 8.0
onwards, gdb needs a C++11 capable compiler, i.e at least gcc 4.8.
Until now, Config.in.host was making sure that gdb 8.0 was not
selectable if the cross-compilation toolchain did not have C++ support
with gcc >= 4.8. This worked fine because the default version of gdb,
used as the target gdb version when no host gdb is built, was 7.11,
and did not require C++11.
With the switch to 8.0 as the default version, when target gdb is
enabled but not host gdb, 8.0 is used, which means we need a C++11
capable compiler. The dependencies in Config.in.host are no longer
sufficient.
So instead, we remove the target-related dependencies from
Config.in.host and move them properly to Config.in. The overall logic
is the following:
- In Config.in.host, BR2_PACKAGE_HOST_GDB_ARCH_SUPPORTS ensures that
we have at least host gcc 4.8 if we're on ARC, because the ARC gdb
needs C++11. We remove the target toolchain related dependencies
from here.
- In Config.in.host, the version selection ensures that 8.0 cannot be
selected if the host toolchain does not have at least gcc 4.8. We
remove the target toolchain related dependencies from here.
- In Config.in.host, we introduce a BR2_PACKAGE_GDB_NEEDS_CXX11
option, that indicates whether the currently selected version of
gdb requires C++11 support in the toolchain to build the target
variant. Even though this option is more related to the target
variant of gdb, we keep it in Config.in.host so that it appears
next to the definition of BR2_GDB_VERSION, to make sure they are
kept in sync.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
So the host ncurses includes and library are used instead of a mix of both,
causing corrupted characters. Similar to the linux fix in commit
6d3d09e232 (linux: don't override HOSTCC for kconfig), except that we
pass the linker flags in HOSTLDFLAGS.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Tornado got a requirement on the SSL module in version 5.0.2
which is also checked in the setup.py script before installing.
Since the check in buildroot runs against the host-python which
is built without SSL support, these checks fail.
Adding OpenSSL support to host-python does not make sense since the
Python on the target will be a different one. Instead, remove the
checks (which, according to the source code comments essentially check
for Python >= 2.7.9 / Python3 >= 3.4 which is true for current
Buildroot) and select the SSL option of Python/Python3 when Tornado is
selected.
Signed-off-by: Jan Dohl <polygon@wh2.tu-dresden.de>
[Thomas: adjust commit title, convert patch to a Git formatted one.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Since version 5.5, daemon is licensed under MIT:
889e5e6bd5
- Plugins are licensed under MIT, GPL-2.0 or LGPL-2.1
- Add libltdl/COPYING.LIB to license files to have a copy of LGPL-2.1 as
it is not in COPYING
- Add hash for both license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
davfs2 is a Linux file system driver that allows to
mount a WebDAV resource. WebDAV is an extension to HTTP/1.1
that allows remote collaborative authoring of Web resources.
[Peter: Add patch to drop -fstack-protector-strong and update dependencies,
Not available on musl and nommu, fixup .hash file comments,
Fix _SITE and drop autoreconf, update DEVELOPERS]
Signed-off-by: Roman Gorbenkov <roman.gorbenkov@ens2m.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
As for strace [1], when <sys/reg.h> is included after <linux/ptrace.h>,
the build fails on m68k with the following diagnostics:
In file included from ./../nat/linux-ptrace.h:28:0,
from linux-low.h:27,
from linux-m68k-low.c:20:
[...]/usr/include/sys/reg.h:26:3: error: expected identifier before numeric constant
PT_D1 = 0,
^
[...]usr/include/sys/reg.h:26:3: error: expected « } » before numeric constant
[...]usr/include/sys/reg.h:26:3: error: expected unqualified-id before numeric constant
In file included from linux-m68k-low.c:27:0:
[...]usr/include/sys/reg.h:99:1: error: expected declaration before « } » token
};
^
Fix this by moving <sys/reg.h> on top of "linux-low.h".
Fixes:
https://gitlab.com/free-electrons/toolchains-builder/-/jobs/72006385
[1] 6ebf6c4f9e
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The local 16-bit byte swap implementation that was introduced in commit
b05f8f4396 (imx-usb-loader: fix build with older gcc) is not robust
enough. It suffers from double evaluation, and operators precedence
breakage. Use a better implementation suggested by Arnout Vandecappelle.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 19448f40a0 (gnutls: use included unistring unless libunistring is
selected) made libunistring an optional dependency. So now gnutls no longer
depend on wchar.
Drop wchar dependency of libmicrohttpd and libsoup, which are gnutls
reverse dependencies that do not depend themselves on wchar.
Update the comments in libsoup and taskd; the wchar dependency is now
not due to gnutls.
Cc: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Contains a fix for a crash when forwarding packets from devices that use
flow offloading and a x86 FPU issue on -rt kernels.
Also add a post-release upstream patch fixing a compilation issue related to
memcpy().
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes
../src/dbinc/atomic.h:179:19: error: definition of 'int __atomic_compare_exchange(db_atomic_t*,
atomic_value_t, atomic_value_t)' ambiguates built-in declaration 'bool
__atomic_compare_exchange(unsigned int, volatile void*, void*, void*, int, int)'
static inline int __atomic_compare_exchange(
^~~~~~~~~~~~~~~~~~~~~~~~~
To reproduce the build error use this defconfig
BR2_GCC_VERSION_8_X=y
BR2_TOOLCHAIN_BUILDROOT_CXX=y
BR2_PACKAGE_BERKELEYDB=y
BR2_PACKAGE_BERKELEYDB_COMPAT185=y
BR2_PACKAGE_BERKELEYDB_TOOLS=y
Please note that to trigger the error BR2_TOOLCHAIN_BUILDROOT_CXX=y
is needed although berkeleydb does not depend on c++.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump U-Boot to 2018.05 and kernel to 4.17.2 versions.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
gcc-8.1 for xtensa miscompiles uClibc dynamic linker due to gcc PR
target/65416. The build completes successfully, but the binary is
non-functional because the following fragment in the _dl_get_ready_to_run
in ld-uClibc.so overwrites register spill area on stack causing register
corruption in the previous call frame and a subsequent crash:
419f: f0c1b2 addi a11, a1, -16
41a2: 1ba9 s32i.n a10, a11, 4
41a4: 0bc9 s32i.n a12, a11, 0
41a6: 5127f2 l32i a15, a7, 0x144
41a9: 1765b2 s32i a11, a5, 92
41ac: 4e2782 l32i a8, a7, 0x138
41af: 146af2 s32i a15, a10, 80
41b2: 001b10 movsp a1, a11
The crash terminates the init process and causes kernel panic.
The fix prevents reordering of movsp opcode and any access to the stack
frame memory and is applicable to all existing gcc versions.
Signed-off-by: Max Filippov <jcmvbkbc@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add my entry to json-c, libsoup, libsoxr, libxslt and tinymembench
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
On some architectures, atomic binutils are provided by the libatomic
library from gcc. Linking with libatomic is therefore necessary,
otherwise the build fails with:
sparc-buildroot-linux-uclibc/sysroot/lib/libatomic.so.1: error adding symbols: DSO missing from command line
This is often for example the case on sparcv8 32 bit.
Fixes:
http://autobuild.buildroot.net/results/fd6bee70ff20bee9607a9f6f557a3a793d00cd9f
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: use LIBS instead of LDFLAGS.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit b54c5464cc (ti-sgx-km: rename options to have proper prefix)
forgot to add defaults from legacy options, and notices in
Config.in.legacy that legacy options are still referenced in the
package itself.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we install flake8 and its dependencies via pip. We
tried to be reproducible by pinning the version of those python
packages, but we did forget quite a few of them, and thus some
dependencies for flake8 are installed as uncontrolled versions.
Furthermore, before we install flake8 and its dependencies, we
forcibly update pip, setuptools, and wheels packages to their
latest versions. This explicitly breaks reproducibility.
While we could enforce a specific version of all those packages
and still grab them from PyPI, we can simply grab them from the
distribution-provided packages instead.
Since we're using a pinned version of stretch, this already
guarantees we'll reproducibly get the same versions over and
over again. Besides, we just need to list flake8 as a package to
install to automatically get all its dependencies (again, in a
reproducible way).
This has the slight unfortunate drawback of downgrading flake8
to version 3.2.1, from version 3.5.0, as well as downgrading a
few of flake8's dependencies, as noticed by Ricardo:
http://lists.busybox.net/pipermail/buildroot/2018-May/222376.html
However, as Ricardo said, there isn't "any serious limitation of
this old version, the release notes for a version in the between
mentions 'Dramatically improve the performance' but we have a
limited number of scripts and running on Gitlab for all of them
still takes less than 5 minutes".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Acked-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
shadowsocks-libev needs thread support, otherwise the configure script
fails with:
configure: error: Can not find pthreads. This is required.
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit f8d4439477
("shadowsocks-libev: new package"), when this package was introduced,
the hash for a license file that isn't available in upstream's tarball
was added to the license file. Obviously, this hash serves no purpose,
so drop it.
Signed-off-by: Min Xu <xuminready@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has been tested with the following commands:
# modprobe galcore
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Same as imx-gpu-viv, no changelog was provided by NXP.
Tested with the following commands:
# /usr/share/examples/g2d_samples/g2d_multiblit_test
# /usr/share/examples/g2d_samples/g2d_overlay_test
# /usr/share/examples/g2d_samples/g2d_test
# gst-launch-1.0 videotestsrc ! imxg2dvideosink
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Basically enabling the package for aarch64. One difference with 32-bit
i.MX platforms resides in the fact that Wayland is the only back-end
supported. Therefore X11 and Framebuffer options are masked.
This was tested on i.MX8MQ Nitrogen8M platform (with weston-imx):
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
[Thomas: drop BR2_PACKAGE_FREESCALE_IMX_HAS_VIV_GPU_WAYLAND_ONLY and
use BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M directly.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
No changelog was provided by NXP but we can assume it's the latest and
therefore the greatest.
What is known, is that that same version worked both ARM and ARM64.
The support for the latter will be added in a follow-up patch.
This package has been tested with X11, Framebuffer and Wayland
back-ends:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
# gmem_info
... display memory use per PID ...
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Both plugins `geometryloaders' and `renderplugins' are available since
Qt 5.9.
Fixes:
>>> qt53d 5.6.3 Installing to target
cp -dpf /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/libQt53D*.so.*
/home/gportay/src/buildroot/output/target/usr/lib
cp -dpfr /home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/qt/plugins/geometryloaders
/home/gportay/src/buildroot/output/target/usr/lib/qt/plugins
cp: cannot stat '/home/gportay/src/buildroot/output/host/arm-buildroot-linux-gnueabihf/sysroot/usr/lib/qt/plugins/geometryloaders': No such file or directory
package/pkg-generic.mk:310: recipe for target '/home/gportay/src/buildroot/output/build/qt53d-5.6.3/.stamp_target_installed' failed
make[2]: *** [/home/gportay/src/buildroot/output/build/qt53d-5.6.3/.stamp_target_installed] Error 1
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Gaël PORTAY <<a href="mailto:gael.portay@savoirfairelinux.com" target="_blank" rel="noreferrer">gael.portay@savoirfairelinux.com</a>><br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Adds WTF platform support for the 32-bits armv8-a architectures.
Fixes:
In file included from ../3rdparty/javascriptcore/JavaScriptCore/config.h:26,
from ../3rdparty/javascriptcore/JavaScriptCore/pcre/pcre_compile.cpp:44:
../3rdparty/javascriptcore/JavaScriptCore/wtf/Platform.h:370:6: error: #error "Not supported ARM architecture"
# error "Not supported ARM architecture"
^~~~~
The patch is based on two upstream fixes in WebKit[1][2].
See also commit cea7aa873a.
[1]: 313d9fc4bd
[2]: 98f0de0709
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `sensors' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `serialport' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `serialbus' from the staging directory
to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `svg' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `wayland' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `script' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `quickcontrols' from the staging
directory to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `location' and `positioning' from the
staging directory to the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When BR2_PACKAGE_QT5BASE_EXAMPLES is set, the examples for this module
are installed in the staging directory but they are not shipped to the
target.
This commit copies the examples `canvas3d' from the staging directory to
the target.
Signed-off-by: Gaël PORTAY <gael.portay@savoirfairelinux.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use the included copy of libunistring unless BR2_PACKAGE_LIBUNISTRING
is already selected.
The resulting gnutls library with libunistring included is about 1.2 MB
smaller than the sum of libgnutls and libunistring.
Signed-off-by: Sven Neumann <neumann@teufel.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes the following security issues:
- (CVE-2018-7167): Fixes Denial of Service vulnerability where calling
Buffer.fill() could hang
- (CVE-2018-7161): Fixes Denial of Service vulnerability by updating the
http2 implementation to not crash under certain circumstances during
cleanup
- (CVE-2018-1000168): Fixes Denial of Service vulnerability by upgrading
nghttp2 to 1.32.0
See https://nodejs.org/en/blog/release/v8.11.3/ for more details
Signed-off-by: Martin Bark <martin@barkynet.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting speex release notes from https://www.speex.org
"Speex 1.2rc2 and SpeexDSP 1.2rc2 are out
December 6, 2014
This release splits the speex codec library and the speex DSP library
into separate source trees."
After bumping speex to 1.2.0 DSP support is provided by speexdsp.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Quoting speex release notes from https://www.speex.org
"Speex 1.2rc2 and SpeexDSP 1.2rc2 are out
December 6, 2014
This release splits the speex codec library and the speex DSP library
into separate source trees."
After bumping speex to 1.2.0 this new package is necessary to provide
speex-based DSP support for packages like Freeswitch and Asterisk.
We use current git HEAD which received 21 commits since the 1.2rc3
tarball was released in 2015, including a fix for building on arm.
We still need another patch which was not committed to git master to
fix building on aarch64.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Commit 9ff035839eef68eb16e90ae70c3e70dc7f57ca5e ("librtlsdr: fix
static build") introduced this obvious typo, which was spotted by
check-package:
package/librtlsdr/librtlsdr.mk:18: possible typo: LIBRTLSDRCONF_OPTS -> *LIBRTLSDR*
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Some packages don't provide source archive but only a wheel file. In
this case download variable is not defined. So define this variable at
the very beginning and check whether it is None after searching for
source archives in the metadata.
Bonus: fix PEP8 issue with wrong indentation.
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
>From the release notes:
================================================================================
Redis 3.2.12 Released Wed Jun 13 12:43:01 CEST 2018
================================================================================
Upgrade urgency CRITICAL:
* Multilple security issues fixed.
* Backport of an older AOF fsync=always fix. Check 4.x release notes.
* Backport of a *SCAN bug. Sometimes elements could be missing from the scan.
* Other minor things.
https://raw.githubusercontent.com/antirez/redis/3.2/00-RELEASENOTES
For more details about the lua related security issues, see the blog:
http://antirez.com/news/119
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add a locally computed hash for the license file to track possible
updates.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-10360: The do_core_note function in readelf.c in
libmagic.a in file 5.33 allows remote attackers to cause a denial of
service (out-of-bounds read and application crash) via a crafted ELF
file.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
In commit bd03966d4e ("toolchain: GCC
bug 85862"), a dependency on BR2_TOOLCHAIN_HAS_GCC_BUG_85862 was added
to the qt5webengine package, but it should have been a dependency on
!BR2_TOOLCHAIN_HAS_GCC_BUG_85862. This commit fixes that.
Signed-off-by: David Barbion <david.barbion@ext.leroymerlin.fr>
Reviewed-by: Matt Weber <matthew.weber@rockwellcollins.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-12015 - In Perl through 5.26.2, the Archive::Tar module
allows remote attackers to bypass a directory-traversal protection
mechanism, and overwrite arbitrary files, via an archive file containing a
symlink and a regular file with the same name.
Patch from
ae65651eab
with path rewritten to match perl tarball.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Removed patch applied upstream, added all upstream and license hashes.
Removed _AUTORECONF, configure and configure.ac in the tarball match,
also removed _INSTALL_TARGET_CMDS, the upstream install target works
just fine nowadays.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
There're known issues with building glibc for ARC with vanilla
Binutils 2.30. Adding a couple of not yet upstreamed patches that
solve it.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
[Thomas: remove numbering in patch titles, renumber patch file names.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Added license hashes, added optional dependency to libseccomp provided
by upstream in this version bump.
Signed-off-by: Bernd Kuhls <bernd.kuhls@t-online.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
As noted in the sourceforge page, the project is not using sourceforge
anymore. Use the gitweb summary page instead.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Apply modifications made in recent commits:
- 456ea9871e busybox: add /dev/std{in, out, err} symlinks to inittab
- 13dbe73782 busybox: reduce number of mkdir calls in inittab
- 8a89d290d4 busybox: add an inittab entry to activate swap
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is a call to swapoff in the shutdown sequence, so call "swapon -a"
on startup. As stated in the swapon man page,
All devices marked as "swap" in /etc/fstab are made available, except
for those with the "noauto" option. Devices that are already being
used as swap are silently skipped.
So even if the system has some init script to start/stop swap (e.g. from
a rootfs ovelay) calling swapon/swapoff would be harmless.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
There is a call to swapoff in the shutdown sequence, so call "swapon -a"
on startup. As stated in the swapon man page,
All devices marked as "swap" in /etc/fstab are made available, except
for those with the "noauto" option. Devices that are already being
used as swap are silently skipped.
So even if the system has some init script to start/stop swap (e.g. from
a rootfs ovelay) calling swapon/swapoff would be harmless.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The default sysvinit inittab does two separate mkdir calls to create
/dev/pts and /dev/shm. Reduce this to call mkdir only once for both
directories.
This removes id "si3" but keeps ids "si4".."si9" intact rather than
renumbering them. This would just increase the turmoil without any
practical effect.
Based on commit e9db8122fb, by Florian La Roche <F.LaRoche@pilz.de>.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Update to modem manager 1.8.0 which does not require udev.
Added option to build without udev but if udev exists in
the build, it build with libgudev.
Signed-off-by: Jared Bents <jared.bents@rockwellcollins.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
4.17 brings support for HDMI out, but sunxi_defconfig hasn't been updated to
enable the drivers - So add a kernel fragment to enable them.
Likewise, analog audio has been supported since 4.10, but the driver isn't
enabled in sunxi_defconfig, so enable it in the fragment.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
triggerhappy uses pkg-config to detect the systemd library. Make sure it
uses the target pkg-config, not the host one.
Fixes build failure when the host has systemd pkg-config files:
.../host/bin/arm-linux-gcc -static th-cmd.o cmdsocket.o -lsystemd -o th-cmd
.../host/opt/ext-toolchain/bin/../lib/gcc/arm-buildroot-linux-uclibcgnueabi/6.4.0/../../../../arm-buildroot-linux-uclibcgnueabi/bin/ld: cannot find -lsystemd
Cc: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-12020: Unsanitized file names might cause injection of
terminal control characters into the status output of gnupg.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Fixes CVE-2018-12020: Unsanitized file names might cause injection of
terminal control characters into the status output of gnupg.
Cc: Vicente Olivert Riera <Vincent.Riera@imgtec.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
The manual is GPL-2, and points to the COPYING file in the repository.
When we do a rendering of the manual for a specific version, that URL
is currently always poitning to the latest version of the COPYING file.
If we ever have to change the content of that file (e.g. to add a new
exception, more clarifications, a license change, or whatever), then
an old manual would point to that newer version, which would then be
incorrect.
Include the sha1 of the commit in the URL, so that the manual always
point to the tree at the time the manual was rendered, not the time
it is consulted. Contrary to the informative text above, use the full
sha1, not the shortened one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin@gmail.com>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Add a dependency to host-cargo
- Add a patch to set RUST_TARGET
- Add a dependency to BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS
- Forward this dependency to efl svg, enlightment, gst-plugins-bad and
gst1-plugins-bad
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas: propagate the new dependency to the gst-plugins-bad and
gst1-plugins-bad Config.in comments.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This commit drops the option BR2_PACKAGE_HAS_HOST_RUSTC, which is no
longer used following commit bd425f716f
("host-cargo: select host-rustc").
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Buildroot documentation specifies that cargo-based package should only
depends on BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS and selects
BR2_PACKAGE_HOST_CARGO but this fails with the following error:
warning: (BR2_PACKAGE_LIBRSVG) selects BR2_PACKAGE_HOST_CARGO which has
unmet direct dependencies (BR2_PACKAGE_HAS_HOST_RUSTC)
Indeed, host-cargo depends on
BR2_PACKAGE_HAS_HOST_RUSTC which is selected only when host-rustc is
selected.
So instead of having to select both cargo and rustc in each cargo-based
package, replace BR2_PACKAGE_HAS_HOST_RUSTC dependency by
BR2_PACKAGE_HOST_RUSTC_ARCH_SUPPORTS and select
BR2_PACKAGE_HOST_RUSTC
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fix three issues with code style in our test infra:
- 'print' is now a function,
- exceptions need to be caught-assigned with the 'as' keyword,
- old-style "%s"%() formatting is deprecated.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
[Thomas: drop indices in format strings.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The original ftp with source code is not reachable any more and this
commit changes the location of the package to corresponding GitHub
project.
Signed-off-by: Mikhail Karpenko <karpenko@fastmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes CVE-2018-7225 - An issue was discovered in LibVNCServer through
0.9.11. rfbProcessClientNormalMessage() in rfbserver.c does not sanitize
msg.cct.length, leading to access to uninitialized and potentially sensitive
data or possibly unspecified other impact (e.g., an integer overflow) via
specially crafted VNC packets.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Release notes: https://mariadb.com/kb/en/mariadb-10133-release-notes/
Changelog: https://mariadb.com/kb/en/mariadb-10133-changelog/
Fixes the following security vulnerabilities:
CVE-2018-2782 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows low
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-2784 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows low
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-2787 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server as well as unauthorized update, insert or
delete access to some of MySQL Server accessible data.
CVE-2018-2766 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.6.39 and
prior and 5.7.21 and prior. Easily exploitable vulnerability allows high
privileged attacker with network access via multiple protocols to compromise
MySQL Server. Successful attacks of this vulnerability can result in
unauthorized ability to cause a hang or frequently repeatable crash
(complete DOS) of MySQL Server.
CVE-2018-2755 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Replication). Supported versions that are affected
are 5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Difficult to
exploit vulnerability allows unauthenticated attacker with logon to the
infrastructure where MySQL Server executes to compromise MySQL Server.
Successful attacks require human interaction from a person other than the
attacker and while the vulnerability is in MySQL Server, attacks may
significantly impact additional products. Successful attacks of this
vulnerability can result in takeover of MySQL Server.
CVE-2018-2819 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: InnoDB). Supported versions that are affected are 5.5.59 and
prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2817 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2761 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Client programs). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Difficult to
exploit vulnerability allows unauthenticated attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2781 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Optimizer). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows high privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2771 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: Locking). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Difficult to
exploit vulnerability allows high privileged attacker with network access
via multiple protocols to compromise MySQL Server. Successful attacks of
this vulnerability can result in unauthorized ability to cause a hang or
frequently repeatable crash (complete DOS) of MySQL Server.
CVE-2018-2813 - Vulnerability in the MySQL Server component of Oracle MySQL
(subcomponent: Server: DDL). Supported versions that are affected are
5.5.59 and prior, 5.6.39 and prior and 5.7.21 and prior. Easily exploitable
vulnerability allows low privileged attacker with network access via
multiple protocols to compromise MySQL Server. Successful attacks of this
vulnerability can result in unauthorized read access to a subset of MySQL
Server accessible data.
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Ryan Coe <bluemrp9@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.17 and U-Boot to 2018.05.
As the dtb file has been renamed in mainline, make the necessary
adjustments in U-Boot environment and also in
BR2_LINUX_KERNEL_INTREE_DTS_NAME.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bump kernel to version 4.17 and U-Boot to 2018.05.
As the imx_v6_v7_defconfig in 4.17 already selects the
CONFIG_CFG80211_WEXT option, the linux.fragment can
be simply removed.
Signed-off-by: Fabio Estevam <festevam@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Use LICENSE instead of main.c in TINYMEMBENCH_LICENSE_FILES
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Bumps the cryptodev-linux package to the latest version available, which
contains some fixes and allows to use cryptodev-linux with a recent
kernel (v4.17).
The patch bumps the version and update the locally calculated hash.
Signed-off-by: Antoine Tenart <antoine.tenart@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Drop the po/ disable patch; not needed anymore.
Drop the __mempcpy compatibility patch; __mempcpy is not used anymore.
Refresh the -Werror removal patch; still needed, unfortunately.
Renumber the remaining patches.
Add GPLv3 license file.
Add license files hash.
[Peter: drop security reference, was added post-release]
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
- Fix CVE-2017-5029
- Remove first patch (already in version)
- Add a dependency to host-pkgconf and remove libxml2 options: see
abf537ebb2
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Executing "/etc/init.d/S29netplug start" multiple times resulted in
multiple instances of netplugd.
Pass "-p /var/run/netplug.pid" to netplugd, so it creates the PID file
that start-stop-daemon needs to know that netplugd is already running.
Also use the pid file to stop netplugd, instead of the daemon name.
Fixes https://bugs.busybox.net/show_bug.cgi?id=10661
Reported-by: Joachim Krueger <mail2k@web.de>
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
I'm working on improving the sysvinit scripts, so it's advisable to keep
an eye on them.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Prior to commit 2dccb4f2fe
("package/docker-containerd: convert to golang infrastructure"), the
containerd binary was installed as docker-containerd. Following the
conversion to the golang package infrastructure, the binary is now
installed as "containerd", which breaks some use cases.
Let's add a symlink link docker-containerd -> containerd to fix such
use cases.
Fixes: https://bugs.busybox.net/show_bug.cgi?id=11076
Signed-off-by: Sam Lancia <sam@gpsm.co.uk>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This is a minor release the main feature of which are the
object-oriented bindings for C++ and Python3. Other than that there's
a couple bug-fixes and minor improvements all around.
Signed-off-by: Bartosz Golaszewski <brgl@bgdev.pl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Drop upstream patches.
Add a patch fixing build with musl libc.
Update the list of licenses based on the content of COPYING. The
BSD-5-Clause license is not listed by SPDX, but that is its name in the
COPYING file.
Update the license file hash: new licenses, dates update, reformat.
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch add mender, an open source over-the-air (OTA) software
updater for embedded Linux devices.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas:
- add entry to DEVELOPERS file.
- drop dependency on systemd, since there is really no build
dependency, it's just that the init script integration is missing.
- add Config.in comment about the thread dependency
- don't override install commands, otherwise the mender binary is not
installed, and instead use a post install target hook.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This adds flatcc as a new package, pulling v0.5.1 from github. flatcc
has both a host tool (the compiler), and libraries for the target.
Signed-off-by: Steve deRosier <steve.derosier@lairdtech.com>
Signed-off-by: Joel Carlson <joel.carlson@cosmicaes.com>
Reviewed-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
[Thomas: add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The PAGER environment variable is including a blank character at the
end. Remove this.
A for loop has been unsetting the variable inside the loop, this is only
needed once at the end of the loop.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The default busybox inittab does two separate mkdir calls
to create /dev/pts and /dev/shm. Reduce this to call mkdir
only once for both directories.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In busybox fix the S01logging usage text to
document the "reload" target.
Signed-off-by: Florian La Roche <F.LaRoche@pilz.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Bump linux as well headers to v4.16 version, this eventually drop the
wifi patch since it has been merged to Linux v4.16.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
When bumping Mono to 5.12.0.226 in commit
80821d3ed8, the license files variable
was not updated to take into account that "eglib" is no longer part of
Mono, and therefore eglib/COPYING doesn't exist anymore. This commit
therefore fixes the license files variable following this change.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
We are working to make all sysvinit scripts conformant to a pattern and
/etc/default/ seems to be a good choice, since 34 packages already get
optional configurations from files at that directory.
netplug still installs an init script at /etc/rc.d/init.d/. This will
be fixed in a future patch that will refactor the init scripts.
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The package recipe uses a post-install hook to remove useless files from
$(TARGET_DIR)/etc/rc.d/init.d and $(TARGET_DIR)/etc/sysconfig. This may
damage packages that install useful files on those directories (such as
netplug, which installs $(TARGET_DIR)/etc/rc.d/init.d/netplugd).
In the future[1] we will reorganize the init scripts and possibly get
rid of /etc/rc.d and /etc/sysconfig but for the moment let's restrict
the file removal to those installed by audit.
1. http://lists.busybox.net/pipermail/buildroot/2018-May/221549.html
Signed-off-by: Carlos Santos <casantos@datacom.com.br>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Fixes a security vulnerability similar to git's CVE-2018-11235
This release changes some configuration options, so tweak them
accordingly.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
libgit2 depends on zlib. If libgit2's build system does not find a
system zlib, then it compiles a bundled version of it, which is not
really great. So instead, add zlib as a mandatory dependency.
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Shadowsocks-libev is a lightweight secured SOCKS5 proxy for
embedded devices and low-end boxes.
https://github.com/shadowsocks/shadowsocks-libev
Signed-off-by: Min Xu <xuminready@gmail.com>
[Thomas:
- drop patch adding license file for libipset
- drop --disable-documentation, it's passed by autotools-package
- add entry in DEVELOPERS file
- pass --disable-ssp because the SSP check uses AC_COMPILE_IFELSE()
so with some toolchains, it think SSP support is available, while
it's not. And anyway we want SSP to be controlled by Buildroot
global options, not on a per-package basis.
- add depends on BR2_USE_MMU, because the code uses fork().]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
'+' is a valid character in a url. The current dl-wrapper gets the
URI scheme by dropping everything after the last '+' character, with
the intension of finding 'git' from e.g. 'git+https://uri'.
If a uri has a '+' anywhere in it, it ends up using too much of the
string as a scheme, and fails to match the handler properly.
An example of where this form of URI is used is when using deploy tokens
in gitlab. It uses a form like https://<username>:<password>@gitlab.com/<group>/<repo.git>
where username for deploy token is of the form 'gitlab+deploy-token-<number>'.
Use the %% operator to search backwards until the last '+' character when
dropping the rest of the string as we know that the first '+'
in the string should be the scheme.
Signed-off-by: Robert Beckett <bbeckett@netvu.org.uk>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove all patches (already in version)
- Since version 0.18 (2016-12-07), there is no
'LibRaw Software License 27032010' licensing anymore (and all signed
agreements have expired). LibRaw is now dual-licensed: LGPL 2.1 or
CDDL 1.0
- Add hash for license files
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
In commit 7517aef4d (support/docker: limit the number of layers),
we reduced the number of layers by coalescing multiple RUN commands
into less commands.
In doing so, we especially coalesced "apt-get update" with "apt-get
install".
However, the distribution we used is a pinned version of stretch, so
we know that running apt-get update will always yield the same apt
database.
If we split the two apt-get commands, then we can re-use any local
intermediate image when we need to update the list of packages to
install; this helps quite a bit when testing the docker files over
and over again, with just slight variants in the packages list.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Cc: Peter Korsgaard <peter@korsgaard.com>
Reviewed-by: Ricardo Martincoski <ricardo.martincoski@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Switch site to github
- Move to autotools infrastructure
- Remove patch (not needed anymore)
- Since version 1.4 (January 2016), license is now LGPL-2.1+
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
All linux configs are renamed to a version neutral filename
to avoid further renaming on kernel bumps.
Defconfig Kernel Qemu Network Status
--------------------------------------------------------------
aarch64_virt 4.16.7 2.12.0 YES OK
arm_versatile 4.16.7 2.12.0 YES OK
arm_versatile_nommu 4.16.7 2.12.0 YES OK (3)
arm_vexpress 4.16.7 2.12.0 YES OK
m68k_mcf5208 4.16.7 2.12.0 YES OK
m68k_q800 4.16.7 q800-v2.11.0 NO (2) OK
microblazebe 4.16.7 2.12.0 YES OK
microblazeel 4.16.7 2.12.0 YES OK
mips32r2el_malta 4.16.7 2.12.0 YES OK
mips32r2_malta 4.16.7 2.12.0 YES OK
mips32r6el_malta 4.16.7 2.12.0 YES OK
mips32r6_malta 4.16.7 2.12.0 YES OK
mips64el_malta 4.16.7 2.12.0 YES OK
mips64_malta 4.16.7 2.12.0 YES OK
mips64r6el_malta 4.16.7 2.12.0 YES OK
mips64r6_malta 4.16.7 2.12.0 YES OK
nios2-10m50 4.16.7 2.12.0 NO OK
or1k 4.16.7 2.12.0 NO OK
ppc_g3beige 4.16.7 2.12.0 YES OK
ppc_mpc8544ds 4.16.7 2.12.0 YES OK
ppc_virtex_ml507 4.16.7 2.12.0 NO OK
ppc64_pseries 4.16.7 2.12.0 YES OK
ppc64le_pseries 4.16.7 2.12.0 YES OK
ppc64_e5500 4.16.7 2.12.0 YES OK
sh4 4.16.7 2.12.0 YES OK
sh4eb 4.16.7 2.12.0 NO (1) OK
sparc_ss10 4.16.7 2.12.0 YES OK
sparc64_sun4u 4.16.7 2.12.0 YES OK
x86 4.16.7 2.12.0 YES OK
x86_64 4.16.7 2.12.0 YES OK
xtensa_lx60 4.16.7 2.12.0 YES OK
xtensa_lx60_nommu 4.16.7 2.12.0 YES OK
(1) - Probably an endian issue with 8139 emulation/driver
(2) - There's a network interface, but enabling it in qemu fails
(3) - Kernel patch required, switched to devicetree usage
Signed-off-by: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Re-add BR2_TOOLCHAIN_HAS_SSP since the toolchain support SSP.
Tested with qemu_nios2_10m50_defconfig and Qemu 2.10.1-3.fc27 release.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Update documentation about adding meson-based packages with instructions for
using pkg-meson infrastructure.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Add a new infrastructure to ease the development of packages that use Meson as
their build system.
Signed-off-by: Eric Le Bihan <eric.le.bihan.dev@free.fr>
[Thomas:
- move global variables definition outside of the inner-meson-package
macro
- for consistency, remove double quote around value passed to meson
in the host configure step.
- minor formatting fixes.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Even if gcc 6 is still maintained for some time (gcc 6.5 is pending),
switch to gcc 7.x since it has been released since 2017-05-02 and
gcc 8.x is available since 2018-05-02.
We have been having toolchains in the autobuilders with gcc
7.x for a while, so the vast majority of the problems should have
already been solved.
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Remove 0860-cilk-fix-build-without-wchar.patch since cilk has
been removed from gcc.
Rebase 0900-remove-selftests.patch on gcc 8.1.0
Remove upstream patches 0001-m68k-coldfire-pr68467.patch and
0892-microblaze-Revert.patch.
Use bz2 release tarball only for gcc 4.9 since all other version
now use xz tarball.
Runtime tested on x86_64 with binutils 2.30, gcc 8.1.0,
kernel headers 4.14 and glibc 2.27.
Buildtime tested with glibc with all supported architectures.
Buildtime tested on x86_64 with musl and uClibc-ng
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Remove patch (already in version)
- Add three patches (first one sent and merged upstream, second and
third patchs retrieved upstream)
- Move to autotools-package
- Remove workaround for static handling of pthread as it isn't needed
anymore
- Remove deactivation of libnl in static build as it isn't needed
anymore
- Set libnl and zlib dependencies as optional and not mandatory
- Add duma and libgcrypt optional dependencies
- Update workaround for static handling of libpcap
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This patch bumps mono to version 5.12.0.226 and it's monolite dependency
to version 1051200002, doing so it removes also a couple of upstreamed
patches.
This new mono version requires also a different option for
managing aot, so this patch refactors also the configure options.
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
usbutils version 010 converted the lsusb.py script to Python 3. Keep the
lsusb.py script on target only when Python 3.x is enabled.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Add GPL-3.0 license for the lsusb.py script.
Update license file location.
The tar archive does not contain the license files from the git tree.
Add a patch adding the license files. This patch is not git formatted
because it only applies to the tar archive.
Upstream fixed tar archive generation for the next release.
Add license files hash.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Corkscrew is a tool for tunneling SSH through HTTP proxies
Signed-off-by: Angelo Compagnucci <angelo@amarulasolutions.com>
[Thomas: add hash for license file, add entry in DEVELOPERS file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The path to the binary images is very long. Since we are about to make
a larger use of it, let's use a variable to make it somewhat shorter.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since all cyclone5 development changes are upstream, change over to an
upstream release of the Linux kernel and u-boot for buildroot.
Signed-off-by: Florian La Roche <Florian.LaRoche@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With CHRONY_ARGS in /etc/default/chrony, chrony may asked to use an
alternative configuration file (with the -f option), so drop the explicit
/etc/chrony.conf check.
In case the configuration file isn't present chrony will anyway loudly
complain which is preferable to this silent failure:
chronyd -f /non/existing/file.conf
Could not open configuration file /non/existing/file.conf : No such file or directory
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
RK3288 Vyasa board support falcon mode in U-Boot and SD layout start from
16MB offset for args and 17MB for uImage. So give full u-boot partition
space as 30M so-that it can occupy bigger uImage file and doesn't overlap
rootfs partition.
[Peter: use # as comment character, clarify comment wording]
Reported-by: Shyam Saini <shyam@amarulasolutions.com>
Tested-by: Shyam Saini <shyam@amarulasolutions.com>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Signed-off-by: Shyam saini <shyam@amarulasolutions.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
This commit bumps ARC toolchain to arc-2018.03-rc2, which
includes significant changes since arc-2018.03-rc1.
We want to test how new toolchain-rc2 builds packages,
so we can make fixes before release of toolcain.
This makes us closer to toolchain release which will be in a few weeks.
Please note that it is a release candidate
and it might contain some breakages,
please don't use it for production builds.
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
0001-Fix-behavior-of-recv-in-the-CLOSING-state.patch is now upstream, so
drop it.
Signed-off-by: Joseph Kogut <joseph.kogut@gmail.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Commit 4ded5d6af4 ("systemd: add
optional dependency on libidn2") contained a mistake: -Dlibidn2=true
was passed even when neither libidn nor libidn2 are
available. Obviously it should be -Dlibidn2=false.
Reported-by: Arnout Vandecappelle <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Use upstream provided tarball and hash.
The tarball conf/ subdirectory contains symlinks to host automake and
libtool scripts. We can't rely on these being present or usable. Remove
the symlinks, and keep autoreconf to populate the conf/ subdirectory
using Buildroot provided autotools.
Cc: Derek Baker <Derek-Baker@idexx.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Install the LTTng control library headers and shared objects
to staging.
The C interface to LTTng described here:
https://lttng.org/docs/v2.10/#doc-liblttng-ctl-lttng
requires including <lttng/lttng.h> and linking against liblttng-ctl,
but those parts are not available unless this package does a staging
install.
Signed-off-by: John Faith <jfaith@impinj.com>
Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
Signed-off-by: Nicolas Cavallari <nicolas.cavallari@green-communications.fr>
[Thomas:
- Do not select BR2_PACKAGE_ZLIB, because zlib is an optional
dependency.
- Handle optional dependencies in a more usual way in libgit2.mk:
group the addition in _DEPENDENCIES and in _CONF_OPTS for a given
library together.
- libgit2 can optionally use libssh2, not libssh.
- Add the optional dependency on zlib.
- Always pass USE_ICONV=ON, the detection works perfectly fine, with
both a C library providing iconv support built-in, and with
libiconv. If neither provides iconv, it gets disabled automatically
as expected.
- Add libiconv as an optional dependency.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Avoid installing check-erlang-lib in the directory where the tarball is
extracted. Instead, use an absolute path to its actual location, i.e.:
$(TOPDIR)/$(EJABBERD_PKGDIR)/check-erlang-lib
Signed-off-by: Johan Oudinet <johan.oudinet@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Currently, we consider that any VFP FPU is a superset of VFPv2, and thus
we use VFPv2 as a way to detect that a VFP is used.
However, for Cortex-M cores, the optional FPU is not a superset of
VFPv2; it is even not a VFP [0].
As a consequence, we can no longer consider VFPv2 as a indication that
an FPU is present.
So, we introduce two new internal options, BR2_ARM_CPU_MAYBE_HAS_FPU and
BR2_ARM_CPU_HAS_FPU, which we use to consider the presence of an FPU.
[0] https://en.wikipedia.org/wiki/ARM_Cortex-M#Cortex-M4
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Libidn2 is an implementation of the IDNA2008 + TR46
specifications (RFC 5890, RFC 5891, RFC 5892, RFC 5893,
TR 46).
http://www.gnu.org/software/libidn/
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
[Thomas:
- Use positive logic to test the BR2_PACKAGE_LIBIDN2_BINARY
condition.
- Put the definition of LIBIDN2_REMOVE_BINARY inside the
BR2_PACKAGE_LIBIDN2_BINARY condition, as suggested by Arnout.
- Adjust license details: library is under GPL-2.0+ or LGPL-3.0+,
while the command line tool is under GPL-3.0+.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Merge both patches in a single one and slighlty update it to keep
current behavior (BUILD_STATIC set to yes by default) to be able to
send it upstream: https://github.com/zeromq/zmqpp/pull/218. Patch has
been merged upstream.
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
- Rework ncurses dependency to use new --with[out]-ncurses option
- Add hash for license file
Signed-off-by: Fabrice Fontaine <fontaine.fabrice@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Since uClibc-ng commit cde74b83f9b2 "ARC: remove special CFLAGS/LDFLAGS handling"
i.e. starting v1.0.23 CONFIG_ARC_CPU_xx options are not used.
Instead uClibc relies on toolchain defaults or build-system CFLAGS
for selection of ARC-specific code (i.e. distinguishes between
ARCompact and ARCv2 ISAs).
So we drop corresponding quirks from Buildroot as well.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: Waldemar Brodkorb <wbx@openadk.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Dropped patch applied by upstream + LTP_TESTSUITE_AUTORECONF = YES which
this patch required and thus not needed any more.
Signed-off-by: Petr Vorel <petr.vorel@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
With this commit we update u-boot version to 2018.05 for
Synopsys boards. U-boot version 2018.05 was released recently
and includes significant changes for ARC boards:
* Fix for compile-time warning for AXS10x
* Add support of platform-specific commands for HSDK
* Add support for on-board SPI flash on HSDK
Signed-off-by: Evgeniy Didin <didin@synopsys.com>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Cc: arc-buildroot@synopsys.com
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Don't rely on a random host package to create the include/ directory for
us. Some packages do the wrong thing since they implicitly assume that
this directory exists already. Commit a557aedad2 (zstd: fix host headers
installation) shows an example of that.
Cc: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Cc: Yann E. MORIN <yann.morin.1998@free.fr>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Having imx-usb-loader on the target might be useful when you're
building a system that itself will be responsible for booting/flashing
i.MX based devices.
Signed-off-by: Vincent Prince <vincent.prince.fr@gmail.com>
[Thomas:
- improve commit log
- fix indentation
- drop BR2_arm dependency
- add missing host-pkgconf dependency
- fix prefix variable to install in $(TARGET_DIR)/usr]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
This package has been tested with Wayland back-end using weston-imx
repository on a i.MX6Q Nitrogen6x:
https://source.codeaurora.org/external/imx/weston-imx/
(tag rel_imx_4.9.51_8mq_ga to work with both i.MX6 and i.MX8MQ)
Weston was started as follows:
# export XDG_RUNTIME_DIR=/tmp
# weston --tty=1 --device=/dev/fb0
Finally the Vivante sample apps were started from weston-terminal:
# cd /usr/share/examples/viv_samples/vdk/
# ./tutorial7
Signed-off-by: Gary Bisson <gary.bisson@boundarydevices.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
glibc now considers its built-in libnsl as being obsolete, and requires
passing --enable-obsolete-libnsl to have it built and installed. libnsl
is now provided as a separate project [1], but it isn't packaged yet in
Buildroot.
In preparation for dropping --enable-obsolete-libnsl from the glibc
package, this commit ensures that exim doesn't use libnsl. It was
already the case for uclibc and musl toolchains, so this commit simply
extends that to make sure libnsl is also not used with glibc toolchains.
Only Exim's nis.so and nisplus.so lookup modules require libnsl,
but they are not build by default. So we can safely remove -lnsl
from the Makefile-Linux. If someone want these modules, a new libnsl
package must be added first to provide nsl library.
Since we remove -lnsl unconditionally, use a patch instead of a sed command.
[1] https://github.com/thkukuk/libnsl.git
[2] https://fedoraproject.org/wiki/Changes/NISIPv6
Signed-off-by: Romain Naour <romain.naour@gmail.com>
Cc: Baruch Siach <baruch@tkos.co.il>
Cc: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
The libopusenc library provides a high-level API for encoding opus audio files
and live streams.
Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
[Thomas: add missing select on opus in Config.in file.]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Also call the step hooks from the three steps they are currently not
called in:
- download,
- actual download (when main archive is not the real source, like
external toolchains),
- rsync (for local or override-srcdir).
Reported-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
These configuration tweaks were added for compatibility with Blackfin
toolchains that bundled a uClibc version without shadow passwords
support. Blackfin is gone, so this is no longer needed.
Cc: Adam Duskett <aduskett@gmail.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+ -n "$(shell cd $(srctree); readlink -f $(CONFIG_PMUFW_INIT_FILE))"
endif
spl/boot.bin: $(obj)/u-boot-spl.bin FORCE
--
2.7.4
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
