The $(BUILD_DIR)/.root rule is executed as part of the 'dirs'
target. The 'dirs' target is re-executed at every execution of 'make
external-deps', and make external-deps explicitly tells make to ignore
targets that have already been made (through the -B option). This
means that the $(BUILD_DIR)/.root rule has to be idempotant, which was
not the case this the introduction of the lib32/lib64 symbolic link.
Running 'make external-deps' three times in a row was sufficient to
trigger an error due to symbolic links being incorrectly created. This
patch fixes that.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The strongswan configure.in uses the AC_LIB_PREFIX macro, which adds
--with-lib-prefix and --without-lib-prefix options, and which, by
default assumes that adding ${prefix}/lib to LDFLAGS and
${prefix}/include to CPPFLAGS is a good idea. Obviously, when
cross-compiling, it is definitely not a good idea.
In the specific case of strongswan, the result is that when testing if
the backtrace() function was available, the small C program was being
built and linked with -L/usr/lib. So when the host architecture and
target architecture are identical, it may find the backtrace()
function in the host C library, without looking at the target C
library:
configure:16457: /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/usr/bin/x86_64-unknown-linux-uclibc-gcc -o conftest -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -pipe -Os -D_LARGEFILE_SOURCE -D_LARGEFILE64_SOURCE -D_FILE_OFFSET_BITS=64 -L/usr/lib conftest.c >&5
/home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/bin/ld: warning: libc.so.0, needed by /home/test/outputs/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/output/host/opt/ext-toolchain/bin/../lib/gcc/x86_64-unknown-linux-uclibc/4.6.3/../../../../x86_64-unknown-linux-uclibc/lib/../lib64/libgcc_s.so, may conflict with libc.so.6
Passing --without-lib-prefix prevents this default behavior from
happening, and no stupid value is added to CPPFLAGS or LDFLAGS.
Fixes:
http://autobuild.buildroot.net/results/a637f916962b6136dd6dd4f4b9ff4e1cab568ef3/
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The MesaLib 7.10.3 tarball has been moved on ftp.freedesktop.org from
pub/mesa/7.10.3/ to pub/mesa/old_versions/7.x/7.10.3/.
A bump to a newer release is only coming after Buildroot 2013.08, so for now
let us just change URL to let the download work properly.
Reported-by: Ryan Wilkins <ryan@deadfrog.net>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some parts of redis fail to build when ccache is enabled, due to one of our
own patches. The construct
make CC=$(CC) target1 target2
would result in
make CC=ccache <tuple>-gcc target1 target2
and here <tuple>-gcc would be treated as a target and the compiler used
would be just 'ccache'.
Reported-by: Johan Sagaert <sagaert.johan@skynet.be>
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since 5628776c4a
"toolchain-external: fix lib64 symlinks"
lib64 is a symlink to lib so there is no reason to copy the libraries
to lib64 anymore. This fixes multiple building problems
for buildroot toolchains:
[...]
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libuClibc-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libuClibc-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil-0.9.33.2.so'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil-0.9.33.2.so'
are the same file
mv: 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64/libutil.so.0'
and 'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib/libutil.so.0'
are the same file
rmdir: failed to remove
'output/host/usr/mips64-buildroot-linux-uclibc/sysroot/lib64': Not a directory
[...]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
minidlna will detect and use the libiconv library if
the package is selected. In that case, we need to link
against -liconv.
Fixes the following linking problem:
tagutils/tagutils.o: In function `do_iconv.constprop.6':
tagutils.c:(.text+0x4d5c): undefined reference to `libiconv_open'
tagutils.c:(.text+0x4da0): undefined reference to `libiconv'
tagutils.c:(.text+0x4e08): undefined reference to `libiconv_close'
[Peter: wrap COMMON_LIBS line]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Always link lib64 or lib32 to lib
* Only copy the architecture's lib directory to staging
* Also cleanup a couple of mkdirs (concerning some 'lib' directories).
Before this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:26 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
drwxr-xr-x 5 samuel users 4.0K Aug 12 22:27 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:27 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:27 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64/lib': Too many levels of symbolic links
find: `./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64/lib': Too many levels of symbolic links
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_files.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nis.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_compat.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_nisplus.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libutil.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libthread_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcidn.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libcrypt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libm.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_hesiod.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnsl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/librt.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_db.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libanl.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libBrokenLocale.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libnss_dns.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libresolv.so
./host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/libdl.so
./target/etc/resolv.conf
./target/dev/log
After this patch:
$ ls -ld host/usr/x86_64-buildroot-linux-gnu/sysroot/{,usr/}lib* target/{usr/,}lib*
drwxr-xr-x 2 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/lib64 -> lib/
drwxr-xr-x 5 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib/
lrwxrwxrwx 1 samuel users 5 Aug 12 22:36 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/lib64 -> lib/
drwxr-xr-x 3 samuel users 4.0K Oct 30 2012 host/usr/x86_64-buildroot-linux-gnu/sysroot/usr/libexec/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/lib64 -> lib/
drwxr-xr-x 2 samuel users 4.0K Aug 12 22:36 target/usr/lib/
lrwxrwxrwx 1 samuel users 3 Aug 12 22:36 target/usr/lib64 -> lib/
$ find . -type l -xtype l # find broken symlinks
./target/etc/resolv.conf
./target/dev/log
Fixes http://autobuild.buildroot.net/results/23fb6b1479d2b5906b72c9437b06ab4700ff246d/
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The NEON intrinsics used by Pulseaudio are only available in either
-mfloat-abi=softfp or -mfloat-abi=hard, not in
-mfloat-abi=soft. Therefore having NEON support in the processor is
not sufficient, we also should *not* be using soft-float.
Moreover, looking at BR2_ARM_ENABLE_NEON to know if the processor has
NEON support is incorrect. This option is only here to allow the user
to tell whether the processor has NEON support or not, for the ARM
cores that only have optional NEON support. Instead, the
BR2_ARM_CPU_HAS_NEON option really indicates whether NEON is available
or not (it is either set automatically by the ARM cores that always
have NEON support, or when BR2_ARM_ENABLE_NEON is enabled by the user
to confirm that his ARM processor has NEON support).
This fixes build failures such as
http://autobuild.buildroot.org/results/675/675c96059be348b594cc92980bef391126931c83/build-end.log
[Peter: add comment about reason for soft abi check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code to set ABI on ARM does the following:
ifeq ($(BR2_arm)$(BR2_armeb),y)
... set ABI without 'hf' suffix ...
else ifeq ($(BR2_ARM_EABIHF),y)
... set ABI with 'hf' suffix ...
endif
But since $(BR2_arm)$(BR2_armeb) will always be 'y' in the cases where
BR2_ARM_EABIHF is 'y', it means that the 'else' part of the condition
will never be used.
Fix this by appending 'hf' to the ABI variable when BR2_ARM_EABIHF is
selected.
[Peter: put EABIhf handling under arm/armeb conditional for consistency]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several of the lines in S50sshd script have a strange mix of spaces
and tabs, that at least do not look consistent with neighboring lines.
This patch makes the spacing consistent, and also strips the trailing
spaces.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(TARGET_DIR) variable is required when building
python-setuptools for the target otherwise the build system detects
the host installation which leads to permission error problems
like these:
Setuptools installation detected at /usr/lib64/python2.7/site-packages
Renaming /usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info to
/usr/lib64/python2.7/site-packages/setuptools-0.9.8-py2.7.egg-info.OLD.1377005697.88
OSError: [Errno 13] Permission denied
Moreover, remove the PYTHONPATH variable for host variant since it's
not needed.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If the file to be patched is missing, then `patch' will interactively
ask for a file to be patched. This is annoying in e.g. the autobuilders
because they have to wait for a timeout instead of failing.
Giving the '-t' (batch mode) option to patch fixes this: it will skip the
missing file, and return a non-zero exit code. So the build cleanly
fails.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit fde2605765 (Makefile: test before search for kernel modules)
changed the way we strip kernel modules, but it fails when modules aren't
available (as test -d returns with a non zero exit code).
Fix it by including the test -d call in a proper shell conditional.
Reported-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 'find $(TARGET_DIR)/lib/modules' used to find and strip kernel
modules fails when no kernel modules have been installed. While the
'|| true' prevents the entire build from failing, there are still some
error messages displayed, which is not nice.
Instead, test if the directory exists before doing the find. We also
remove the '|| true' in order to really abort the build if a
problematic error occurs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Luca Ceresoli <luca@lucaceresoli.net>
Just like 'attr', 'acl' doesn't use automake to control the
build/installation of its components, and the static-only installation
process was not installing libacl.a. We add a patch that fixes this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
When attr is built static-only, it forgets to install its libattr.a
file, which leads to the build failure of packages such as 'acl' that
rely on attr.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
'cut' needs to be invoked with the -s option to make sure it doesn't
print anything when the delimiter isn't found. This is particularly
important for the charmap detection, because UTF-8 is appended if
the charmap is empty. But without -s, it will never be empty.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The Qt5 upstream URL has changed, which leads to build failures in the
autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
See Source/WTF/wtf/Platform.h. Webkit is only supported for
arm, armeb, i386, mips, mipsel, powerpc, sh, sparc, x86_64.
[Thomas P: propagate dependency to the midori package.]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Specifying a floating tag like HEAD for a repository version is bad practice,
as it results in non-reproducible builds. This patch removes the default
assignment of HEAD as version when a custom git repository is used for the
Linux kernel.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The external-toolchain infrastructure creates symbolic links for all
tools in the host directory. However, when buildroot builds its own
version of a cross debugger (BR2_PACKAGE_HOST_GDB), and the toolchain
also provides a cross debugger, there would be two symbolic links for
gdb in the host directory, which is confusing.
An example use case is where the external toolchain only provides a
64-bit gdbserver (e.g. Cavium Networks SDK) but the target is completely
32-bit (e.g. n32 ABI). In this case, using gdbserver on target requires
copying a bunch of 64-bit libraries to the target as well, just for gdb.
In this case, one can let buildroot build both gdbserver as cross-gdb
(both in 32-bit).
This patch modifies the symlink creation so that no gdb (or gdbtui)
symlink is created if buildroot is going to build a cross-gdb.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
As Arnout noted, we removed the BR2_ARM_OABI option without adding the
corresponding option in Config.in.legacy, so users upgrading to
Buildroot 2013.08 with an OABI configuration would get migrated
automatically to EABI without any warning.
This commit introduces such a legacy option, so that such users would
be explicitly warned about the removal of OABI support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Improve the contribute manual section by adding an explanation about patch
review and version.
The section now provides advices in how to respond maintainers requests and how
to proceed on replying them.
[Thomas: further small modifications.]
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The 3.10.x kernels fail to build with the following message:
vsprintf.c:(.text+0x17e0): relocation truncated to fit: R_AVR32_16N_PCREL against symbol `_ctype' defined in .text section in lib/lib.a(ctype.o)
While this is most likely a toolchain issue, but since AVR32 isn't a
well-maintained architecture, there's not much we can do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Samuel: add precision about non-tar archive]
[Thomas: reword with more details. Fix commit title]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
While reviewing the eglibc package, Peter mentionned that it would be
good to add a comment that explains why we explicitly build eglibc
with -O2 instead of using the user selected optimization level. This
commit add such a comment.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The gpu-viv-bin-mx6q package selects BR2_PACKAGE_HAS_OPENGL_EGL and
BR2_PACKAGE_HAS_OPENGL_ES, so when it is enabled, Buildroot believes
that OpenGL and EGL support is available.
However, both libgles.mk and libegl.mk do not add the dependency on
gpu-viv-bin-mx6q, so when pulling the libgles or libegl dependencies,
the build fails due to the absence of an OpenGL implementation. This
commit fixes that.
Fixes the build failure at
http://autobuild.buildroot.org/results/dbd/dbd938914883a9e205f967f7b4b4a8a7dc7be117/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The BR2_LINUX_KERNEL_INSTALL_TARGET option not only copies the kernel
image to /boot, but also the DTBs, if such DTBs are generated by the
build process. It makes sense to mention that in the help text of this
option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The target for building the kernel with a cpio initramfs is not
calling the append dtb commands, creating a final kernel image
without an appended dtb. Instead it needs to call kernel make on
the intermediate target, then call the append dtb commands
to produce the final image as the primary kernel build target
does.
Signed-off-by: Nathan Ford <nford@westpond.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes bug #5516 - appended device tree blobs on uImage fails
Before version 3.7 of the kernel, building the zImage and then the
uImage will rewrite the zImage in the process, removing the device tree
we just appended.
Use mkimage to append the device tree to the uImage and rebuild the
headers directly.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libgpgme has an internal implementation of argp parsing for when the
libc lacks such an implementation (i.e. uClibc).
However if it detects argp.h the internal implementation is disabled and
for a uClibc-based toolchain that breaks the build.
This happens when argp-standalone is installed since libgpgme never
tries to link to libargp.
Make it link against libargp, which also saves some target size. Fixes:
http://autobuild.buildroot.net/results/33c/33c5776d2b3f7fa276a27f7602eb71c4d77c7b62/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
udev-182 requires several groups to be resolvable at udev startup,
including disk, cdrom, floppy, tape, audio, video, lp, tty, dialout,
and kmem. Only some of these are in the default skeleton's group
file, So let's add the missing groups, and plugdev too.
This avoids getting these logs in /var/logs/messages:
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'dialout' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'kmem' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'video' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'lp' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'floppy' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'cdrom' unknown
Jan 1 00:00:08 buildroot daemon.err udevd[37]: specified group 'tape' unknown
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: reformat header and Config.in help text, add dependency on
glibc since cppcms uses <monetary.h> functions that aren't available
in uClibc.]
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This reverts commit 1c834dd1ce.
This patch has been mistakenly applied, while a new version of it had
already been merged. Thanks Gustavo for noticing.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
libsoup doesn't use intl stuff directly, but uses gi18n. libglib2
already has all required dependencies on gettext.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on gettext comes from libglib2, not from gdk-pixbuf
itself.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The dependency on gettext is only due to libglib2, not due to
pulseaudio itself. It works fine without gettext if libglib2 is
not selected.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Packaging pmake was required when we used the upstream libedit.
Since we have switched to using the autotools-based libedit,
pmake is no longer needed.
Because pmake is quite ugly, let's just drop it.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Upstream libedit does not have a proper homepage, and does not provide
any sort of packaging whatsoever. So far, we used Debian's wayback
machine to get a tarball of a rather oldish libedit.
As Thomas pointed out, someone has been maintaining a proper autotools
based, up-to-date package for a while.
While Debian is stuck to 2.11 (5 years old now), we bump to 3.1 as a bonus.
Remove our libedit.pc, it's now bundled with the package.
Reported-by: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
strongSwan is an OpenSource IPsec implementation for the Linux
operating system. It is based on the discontinued FreeS/WAN project
and the X.509 patch.
Signed-off-by: Jérôme Pouiller <jezz@sysmic.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch adds libcec for HDMI device control. It enables Raspberry Pi
support if the rpi-userland package is installed.
[Thomas: add C++ dependency, reformat .mk header.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Add lockdev a package for locking devices.
[Thomas: change location in menuconfig, reformat header in .mk file.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: implement simplifications suggested by Thomas De
Schampheleire, add missing 'depends' on required toolchain features.]
Signed-off-by: Paul B. Henson <henson@acm.org>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: added patch to disable build of tests that fail on uClibc,
added dependencies for architectures that are supported.]
Signed-off-by: Andy Kennedy <andy.kennedy@adtran.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: rename package to sunxi-cedarx, improve help text
description, install libraries with executable permissions to make
sure they get stripped at the end of the build.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: remove trailing whitespace, install libraries with execution
permissions so that they get stripped by Buildroot, r2p4 is only
available on EABI toolchains, r3p0 on EABIhf toolchains.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This patch fixes the nightly build failure caused by tstools. It is
back ported from recent upstream commit
0e8463ea1dc55f566a88bb3df29cf3d5f23cc326.
Once the upstream update the download page with more recent source
tarball, this will no longer be needed.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
It's also done in the kernel configuration, however users may be using
some other pre-built kernel and miss functionality like firmware
loading.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
SER2NET_AUTORECONF is needed because of libtool version mismatch.
See error message bellow:
/bin/bash ./libtool --tag=CC --mode=link gcc -Wall -g -O2 -o
ser2net controller.o dataxfer.o devcfg.o readconfig.o selector.o
ser2net.o utils.o telnet.o buffer.o -lnsl
libtool: Version mismatch error. This is libtool 2.4.2
Debian-2.4.2-1ubuntu1, but the
libtool: definition of this LT_INIT comes from libtool 2.2.6b.
libtool: You should recreate aclocal.m4 with macros from libtool 2.4.2
Debian-2.4.2-1ubuntu1
libtool: and run autoconf again.
make: *** [ser2net] Error 63
Signed-off-by: Yegor Yefremov <yegorslists@googlemail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
tclsh is installed with its version number (tclshx.y) but scripts (like
usb_modeswitch_dispatcher) are calling tclsh, not tclshx.y.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Stripping is done at the end of the buildroot process, for all files at
once.
There's no need to do it here.
(Suggested by Thomas Petazzoni)
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
v0.1.2 update build system from autotools to cmake.
[Thomas: add patch to ensure the CMake build system only checks for a
C compiler and not a C++ compiler]
Signed-off-by: Marek Belisko <marek.belisko@open-nandra.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The -perm +mode is deprecated, and sometimes yields suprising results.
It can be confused with permission in symbolic mode, for example '+u+g',
as POSIX spec suggests.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
dropwatch requires thread support because it selects libnl that
depends on thread support. Also dropwatch cannot build on AArch64,
because it selects the target binutils package which isn't (yet)
available on AArch64.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
usb_modeswitch_data unconditionally selects usb_modeswitch, but
usb_modeswitch depends on thread support. This commit has the thread
support dependency to usb_modeswitch_data.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
This commit adds a dependency of the libglib2 package on thread
support in the toolchain, since upstream libglib2 doesn't build
without thread support. The commit is rather large as it involves
propagating the dependency on thread support to all reverse
dependencies of the libglib2 package.
[Thomas: squash all patches into one, make a few minor fixes, the most
important one being to not add comments about MMU requirement when a
package doesn't work on !MMU platforms.]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Some toolchains, like the Cavium Networks' one, have lib32/ and lib64/
directories, while the standard lib/ is empty. To find libc.a, buildroot
currently only looks in lib/ and lib64/. This patch extends the search
to lib32/ as well.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Blackfin for FDPIC targets uses *-linux-*, however for FLAT targets it
needs *-uclinux-* in order for gcc to build properly.
[Thomas: use a TARGET_OS variable instead of redefining
GNU_TARGET_NAME completely]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Now that we've dropped 0.9.31.x we can use the startfiles /
install_startfiles targets instead of building and installing them by
hand.
Fixes internal blackfin toolchain build errors regarding crtreloc.o
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Thomas: properly indent help text, add largefile dependency, remove
unneeded libpcap dependency, remove unneeded CLEAN_CMDS, reorder build
and install commands, remove uneeded <pkg>_INSTALL_STAGING,
<pkg>_INSTALL_TARGET and <pkg>_INSTALL_IMAGES variables, move from
package/multimedia/ to package/, add license details, rename patch to
remove version number in the patch filename.]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The current SSP handling is incomplete.
First we need to build uClibc with SSP support for a complete
"experience".
Second, it doesn't hurt to add -fstack-protector-all to the
CFLAGS/CXXFLAGS since most users would expect buildroot to do this
rather than adding the flags themselves.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
The directfb example program df_dok now requires rose.png to be
installed, otherwise it gives the following error:
(#) DirectFBError [dfb->CreateImageProvider( dfb, DATADIR"/rose.png", &provider )]: A general or unknown error occured
Therefore add rose.png to the list of data files if df_dok is enabled.
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Fixes "Value too large for defined data type" messages caused by fstat
syscall wrapper returning -EOVERFLOW.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
On some platforms, the standard U-Boot binary is not called u-boot.bin,
but u-boot<something>.bin. This is for example the case on the
Cavium-provided u-boot, where the output file is called
u-boot_<boardname>.bin.
This patch adds a 'custom format' choice in the existing u-boot binary
format selection, where this name can be put. In the Cavium example, this
option could be set to:
BR2_TARGET_UBOOT_FORMAT_CUSTOM_NAME="u-boot-$(BR2_TARGET_UBOOT_BOARDNAME).bin"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
[Peter: fix help text & license, needs host-pkgconf]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
pkg-download.mk contains some helper functions to obtain subparts of URLs,
like the URI scheme. In pkg-generic.mk, there is still one opportunity to use
that helper function, instead of hardcoding it.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The linux kernel and uboot specify -msoft-float in order to prevent floating
point code from being generated. This causes a conflict when -mfloat-abi=hard
or -mfloat-abi options are specified in the wrapper. This patch removes the
-mfloat-abi option from the options generated by the wrapper only when
-msoft-float, -mhard-float or -mfloat-abi are specified by the user.
[Peter: fix !BR_FLOAT_ABI case, simplify]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Tested-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, it fails even in official form
(COMPILE_IN_THUMB_MODE=y) so just build it in ARM mode since EABI
mandates interworking.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It runs out of registers, so build it in ARM mode, EABI mandates
interworking so this isn't an issue.
Tested in an arm920t board.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libmudflap doesn't build for a thumb(1) toolchain so disable it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In early buildroot, it apparently was customary to have following style in
Config.in files:
bool"expat"
Nowadays, only two packages remain with this style: diffutils and expat.
This trivial patch lines them up with the style:
bool "expat"
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch creates a config option for the ISC DHCP server to allow passing
--enable-delayed-ack to its configure script.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
These were required with ARC gcc 4.4.7; ARC gcc 4.8 has been changed
to behave the same as other architectures with -nostdlib, making this
option obsolete.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes multiple issues, including:
- 'operand out of range' errors (due to defaulting to
medium calls instead of short calls)
- library dependencies that were not being found
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If BR_DEBUG_WRAPPER is set in the envirnment, dump the actual command
being exec()uted, to ease debugging issues with the wrapper.
[Peter: adjust code style and output format to be cut'n'paste compatible]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of over-writing the nsswitch.conf file (which may already contain
user's specific configuration if it comes from a custom skeleton), just
replace the 'hosts' line.
Remove now-useless custom nsswitch.conf file.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In buildroot, the avahi socket is located in /var/run/avahi-daemon,
not in /usr/var/run/avahi-daemon/socket.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump for a few fixes:
- fix for slow SDcards
- fix for USB interrupts
- fix for tracing functions
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With the move of uclibc to package/uclibc, the uclibc-menuconfig target now
depends on uclibc-configure, which brings in the build of
binutils/gcc-initial/mpfr/gmp, causing it to take ages with a clean tree.
Fix it by moving the basic .config mangling to the patch step, and depend
on that for menuconfig instead.
Notice that this is broken for _OVERRIDE_SRCDIR users, just like for
busybox, but as that is presumably a small subset of the buildroot
user base (and these advanced users can just run menuconfig in their
local uClibc tree), so this is considered the lesser evil of the two.
The proposed out-of-tree build series will also cause problems with
this.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With modern shells, we can simply do test using the "$(...)" = "value"
form. This commit gets rid of the x$(...) = x"value" constructs and
replaces == by =, which is the correct operator to test the equality
of two strings with the test program.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Following the introduction of the support of EABIhf as a second ARM
ABI, it is important to check whether the external toolchain provided
by the user actually uses the ABI that has been selected in the
Buildroot configuration. This commit introduces such a check by
looking at the 'Tag_ABI_VFP_args' tag of the architecture-specific
section of the ELF headers. This assumes that ELF is the binary format
used on ARM, which may not be the case on ARM noMMU systems (they use
the FLAT binary format), but Buildroot doesn't have support for such
systems at the moment.
Also ensure the correct CFLAGS are passed to the cross compiler for the
test, so the correct variant is used in case the toolchain is multilib.
[Peter: mention CFLAGS change]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noted by Yann E. Morin, the x$(...) = x"value" syntax is old and
ugly, and the easier to read "$(...)" = "value" can now be used
without problems.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds three patches to uClibc that are needed to make
Thumb2 support work properly:
uclibc-0006-arm-clone-restore-stack-pointer-just-after-return-fr.patch
uclibc-0007-arm-clone.S-Add-missing-IT-instruction-for-Thumb2.patch
uclibc-0008-arm-move-check-for-BX-to-its-own-header.patch
The first one is a necessary dependency of the second one. Both of
those patches have already been merged upstream, after 0.9.33.2. The
third one hasn't been merged upstream yet, but it has already been
submitted a while ago by Yann E. Morin, without receiving attention
from upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation to the addition of more patches that require a correct
ordering, rename uClibc 0.9.33.2 patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we were using the default ARM instruction set, as used by
the toolchain: the 32 bits ARM instruction set for the internal
backend, and for external toolchain, whatever default was chosen when
the toolchain was generated.
This commit adds support for the Thumb2 instruction set. To do so, it:
* provides a menuconfig choice between ARM and Thumb2. The choice is
only shown when Thumb2 is supported, i.e on ARMv7-A CPUs.
* passes the --with-mode={arm,thumb} option when building gcc in the
internal backend. This tells the compiler which type of
instructions it should generate.
* passes the m{arm,thumb} option in the external toolchain
wrapper. ARM and Thumb2 code can freely be mixed together, so the
fact that the C library has been built either ARM or Thumb2 and
that the rest of the code is built Thumb2 or ARM is not a problem.
[Peter: fix empty BR2_GCC_TARGET_MODE check]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using eglibc, the ld-linux loader is installed as
ld-linux-armhf.so.3, but gcc 4.7.x was not yet updated, and generates
binaries that reference ld-linux.so.3. This was fixed starting with
gcc 4.8.x. In order to be able to use gcc 4.7, we create the
appropriate symbolic link.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The introduction of the EABIhf ABI requires a few updates to the
configuration options for external toolchains, in order to ensure that
the user doesn't do any invalid selection. In detail:
* The Linaro ARM toolchains now depend on BR2_ARM_EABIHF, because
that's the ABI they use, and it is incompatible with EABI. The
comment about the availability of Linaro toolchains is updated to
inform users selecting EABI that they should select EABIhf if they
want to see Linaro toolchains.
* The Sourcery CodeBench toolchains now depend on BR2_ARM_EABI,
because that's the ABI they use. A comment is added to inform users
that have selected EABIhf that Sourcery CodeBench are only
available when EABI is used.
* The Arago toolchains now depend on BR2_ARM_EABI, because that's the
ABI they use. The description of the ARMv7 Arago toolchain is also
slightly improved.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that we have a much better way of selecting between the various
VFP versions and capabilities, the BR2_VFP_FLOAT version no longer
makes sense. This commit gets rid of it, and adds the appropriate
Config.in.legacy code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in gcc 4.6.x, so versions
earlier than this one should not be used when EABIhf is selected.
The ARM VFPv4 support was introduced in gcc 4.5.x, so versions earlier
than this one should not be used when VFPv4 is used.
[Peter: drop OABI dependencies]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ARM EABIhf support was introduced in Binutils 2.22, so earlier
versions should not be selected when EABIhf is used.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit introduces the support for the EABIhf ABI, next to the
existing support we have for EABI and OABI (even though OABI support
is deprecated). EABIhf allows to improve performance of floating point
workload by using floating point registers to transfer floating point
arguments when calling functions, instead of using integer registers
to do, as is done in the 'softfp' floating point model of EABI.
In addition to this, this commit introduces a list of options for the
floating point support:
* Software floating point
* VFP
* VFPv3
* VFPv3-D16
* VFPv4
* VFPv4-D16
and it introduces some logic to make sure the options are only visible
when it makes sense, depending on the ARM core being selected. This is
however made complicated by the fact that certain VFP capabilities are
mandatory on some cores, but optional on some other cores. The kconfig
logic tries to achieve the following goals:
* Hide options that are definitely not possible.
* Use safe default values (i.e for Cortex-A5 and A7, the presence of
the VFPv4 unit is optional, so we default on software floating
point on these cores)..
* Show the available possibilities, even if some of them are not
necessarily working on a particular core (again, for the Cortex-A5
and A7 cores, there is no way of knowing whether the particular
variant used by the user has VFPv4 or not, so we select software
floating point by default, but still show VFP/VFPv3/VFPv4 options).
It is worth noting that this commit doesn't add support for all
possible -mfpu= values on ARM. We haven't added support for fpa, fpe2,
fpe3, maverick (those four are only used on very old ARM cores), for
vfpv3-fp16, vfpv3-d16-fp16, vfpv3xd, vfpv3xd-fp16, neon-fp16,
vfpv4-sp-d16. They can be added quite easily if needed thanks to the
new organization of the Config.in options.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As we are going to introduced a more advanced support of floating
point options for the ARM architecture, we need to adjust how the
soft-float option is handled. We replace the current hidden option
BR2_PREFER_SOFT_FLOAT option and the visible BR2_SOFT_FLOAT option by:
* A global hidden BR2_SOFT_FLOAT option, defined in arch/Config.in,
that tells whether the architecture-specific code is using software
emulated floating point. This hidden option can be used throughout
Buildroot to determine whether soft float is used or not.
* Per-architecture visible BR2_<arch>_SOFT_FLOAT options, for the
architecture for which it makes sense, which allows users to select
soft float emulation when needed.
This change will allow each architecture to have a different way of
presenting its floating point capabilities.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot already has the BR2_GCC_TARGET_{TUNE,ARCH,ABI,CPU} hidden
kconfig strings that allow per-architecture Config.in files to feed
the appropriate values of --with-{tune,arch,abi-cpu} when building
gcc, or the appropriate flags for the external toolchain wrapper.
This commit has two additional options:
BR2_GCC_TARGET_{FPU,FLOAT_ABI}, that allows to define the
--with-{fpu,float} gcc configure options for the internal backend, or
the -m{fpu,float-abi} options for the flags of the external toolchain
wrapper.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libsvg-cairo provides the ability to render SVG content from files or
buffers. All rendering is performed using the cairo rendering library.
[Peter: license is LGPLv2.1+]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libosip2 appears to have support for the "ARC standard" (Advanced
RISC Computing), which is unrelated to Synopsys DesignWare ARC
processors. The check for this involves verifying the existence of
the "__arc__" macro. Unfortunately, this macro is also present
as a predefined built-in for the ARC processors, resulting into
build failures.
[Peter: add short comment in .mk files as well]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OABI is more than legacy, it's dead.
New developments should go with EABI, since it so much better.
>From the Debian EABI page [0] :
- floating point performance, with or without an FPU is very much faster
- mixing soft and hardfloat code is possible
- structure packing is not as painful as it used to be
- a more efficient syscall convention
- more compatibility with various tools
[0] http://wiki.debian.org/ArmEabiPort
[Thomas: keep the ABI choice, as we are going to introduce EABIhf later].
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When refactoring the internal toolchain backend logic, the code was
changed to pass the custom configure options given through
BR2_EXTRA_GCC_CONFIG_OPTIONS only for the gcc final pass, with the
idea that we're only interested by user customization for the final
compiler.
However, the beaglebone_defconfig was passing --with-float=hard
--with-fpu=vfpv3-d16 as BR2_EXTRA_GCC_CONFIG_OPTIONS, and since the
refactoring, it was causing build failures of the beaglebone_defconfig
(with messages saying that Busybox is built to use VFP arguments, but
libc/libm are not). This is due to the fact that the gcc intermediate,
which is used to build the C library, wasn't built to generate hard
float, while the final compiler was generating hard float.
So, we get back to the original situation where the options in
BR2_EXTRA_GCC_CONFIG_OPTIONS are passed to all of the compiler
passes. Of course, the specific case of hard float will be fixed by
following patches in this area, but the idea still remains: the three
gcc should have the same options, if those options affected the ABI of
the generated code.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On Gentoo systems with ruby installed RUBYOPT is set and causes build
breakage for some packages that needs host-ruby (example: webkit).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 6b48b48034 ("add a know to enable/disable building a shared
libgcc"), from october 2006, isn't really as to why a
BR2_GCC_SHARED_LIBGCC option was needed. However, now that gcc has
been converted to the package infrastructure, it causes problems
because the host packages are always being passed --enable-shared
--disable-static, so re-adding --disable-shared on top of that break
things.
Moreover, our tests indicate that both a shared *and* a static version
of libgcc are built, and that linking dynamically and statically a
program that uses libgcc_s gives correct results: dynamically linked
against libgcc_s in the first case, statically linked in the second
case.
Therefore, it appears that this option is no longer necessary, and
removing it has the advantage of fixing the builds of
qemu_mips64_malta_defconfig and qemu_sparc_ss10_defconfig, both of
which had BR2_GCC_SHARED_LIBGCC not enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: license is GPLv2, fix license file, drop unneeded standard include]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also move smtpd.py removal to the global remove useless files define.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Reorder the external python modules menu entry so that it belongs under
python(2) and not under python3 to avoid confusion.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This adds a patch that adds the __kernel_long and __kernel_ulong types to
uClibc. This fixes the build failure with Linux 3.10 headers.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It can be useful to have different configuration use the same post-build
and/or post-image scripts as they share a common infrastructure, but yet
have minor differentiation.
This option allows passing zero or more additional arguments to each
post-build or post-image script.
The same set of extra arguments are passed to all scripts, it is not
possible to pass different arguments to each script.
[Peter: fix help text, post-image gets called with the images dir]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Baruch Siach <baruch@tkos.co.il>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In 25c3160092 ("uClibc 0.9.31: remove stray kludges/conditions"), a
conditional that prevents the combination gcc 4.2-avr / C++ / locale
with uClibc 0.9.31 was removed. However, it turns out that the same
problem is affecting uClibc 0.9.33, described at
http://comments.gmane.org/gmane.comp.lib.uclibc.buildroot/24260.
Therefore, we prevent the combination of gcc 4.2-avr / C++ / locale to
happen.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU Ocrad is an OCR (Optical Character Recognition) program
based on a feature extraction method.
It reads images in pbm (bitmap), pgm (greyscale) or ppm (color) formats
and produces text in byte (8-bit) or UTF-8 formats.
[Peter: fixup whitespace, install into STAGING_DIR, use make install, BR2_GNU_MIRROR]
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initramfs compression does not make much sense for the architectures
that support compressed kernel images because in this case the data
would be compressed twice. This will eventually result in a bigger
kernel image and time overhead when uncompressing it.
The only reason to use compressed initramfs is to reduce memory
usage when the kernel prepares rootfs, and both the unpacked
filesystem and initramfs.cpio are present in the memory.
Buildroot attempts to force GZIP compression for initramfs,
however it doesn't always work because initramfs compression mode
depends on RAM disk compression supported by the kernel.
Thus, CONFIG_INITRAMFS_COMPRESSION_GZIP depends on CONFIG_RD_GZIP.
If CONFIG_RD_GZIP is not set, setting GZIP initramfs compression
will have no effect.
Besides, the kernel also supports other compression methods,
like BZIP2, LZMA, XZ and LZO. Forcing the good old GZIP does not
really make much sense any more.
This removes initramfs compression settings from Buildroot,
so that the default value preset in the kernel config is used,
which is CONFIG_INITRAMFS_COMPRESSION_NONE.
If initramfs compression is still needed, it can be set
in the kernel config (using make linux-menuconfig)
Signed-off-by: Valentine Barshak <gvaxon@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The udhcp.busybox.net site is gone, it's now pointing to bugzilla.
udhcp has been a part of busybox for some time now.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
While at it add the missing network interfaces to configurations that
support it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add uClibc upstream patch to support __kernel_long and __kernel_ulong
datatypes as used by kernel headers 3.10+
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... for a truck-load of memory-leak and other various fixes.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The package/efl/libevas/libevas-fix-xcb-backend-typo.patch patch is
removed, as it has been merged upstream.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
All the EFL components are released simultaneously, with an identical
version number, just like all Qt5 components for example. So it makes
sense to have a single EFL_VERSION variable in package/efl/efl.mk that
is used by all the packages in package/efl/*/*.mk.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Misc fixes and enhancements:
- faster image blitting in framebuffer
- USB fixes, and use of FIQ instead of plain IRQ
- generic ARM fixes for memset
- BT l2cap fix
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes for:
- sound volume
- GL deadlock
- ressources leak
- compressed audio streams
- audio sampling up to 192kHz
- display scaling
- cache flush for mailbox
Switch to using a 7-char cset, instead of the long one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported by 'scanf' on IRC, the iptables now fails to build because
of a missing <asm/cache.h> header in the kernel headers. The package
directly uses $(LINUX_HEADERS_DIR), which is not correct: this is the
source directory of the kernel, not where they are installed, and in
addition, this directory is empty/does not exist when using external
toolchains.
Instead, we use $(STAGING_DIR)/usr, which contains the kernel headers,
as part of the toolchain headers.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linuxdevices.com has been dead for some time now when it was bought out.
Switch to linuxgizmos.com which is the new page of the author.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason, a '+' sign was left at the beginning of a line in
eglibc.mk. Noticed by Gustavo Zacarias.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The headers and kernels where changed to XZ format on commit
98b5cc3eb4, but the headers reverted back
to bz2 on the packaging of the toolchain.
This causes double kernel downloads when the versions match, so switch
back the headers to XZ.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lttng-tools doesn't require bison or flex, it contains pre-generated
versions of the lexer and parser, so it can build perfectly fine
without bison and flex. We have removed both of these tools from our
mandatory dependencies since a bit of time, the Free Electrons
autobuilders don't have them installed, and the build succeeds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Using the newly introduced 'eglibc' package, this commit enables the
option of building a toolchain using the eglibc C library in the
Buildroot toolchain backend.
In details, this commit:
* Creates a choice to select uClibc or eglibc in the Buildroot
toolchain backend (in toolchain/toolchain-buildroot/Config.in), and
removes the fact that the Buildroot toolchain backend forcefully
enables uClibc (toolchain/Config.in).
* Creates a BUILDROOT_LIBC variables, which points to the package
implementing the C library (i.e either 'uclibc' or 'eglibc').
* Modifies the gcc-final and gcc-intermediate makefiles to use the
BUILDROOT_LIBC variable instead of hardcoding the use of uclibc.
* Ensures that TLS support is always enabled when building eglibc.
[Peter: fix commit text to refer to BUILDROOT_LIBC]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds a target 'eglibc' package. For now, there is no way
to build this package, the next commit will add the integration of
eglibc into the Buildroot toolchain backend.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the introduction of the eglibc library to the
internal toolchain backend, the options that allow to enable/disable C
library features such as largefile, IPv6, RPC and so on now belong to
the uClibc package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, when we need to do a conditional on the type of C library
used, we need to take into account the three toolchain backends. As we
are going to add eglibc support to the Buildroot toolchain backend, it
would become even uglier, so this patch introduces two new hidden
options: BR2_TOOLCHAIN_USES_UCLIBC and BR2_TOOLCHAIN_USES_GLIBC, that
exist regardless of the toolchain backend. The entire Buildroot code
base is converted to use those options.
Note that we have intentionally created only one option
(BR2_TOOLCHAIN_USES_GLIBC) for both glibc and eglibc, since they are
essentially the same, as far as Buildroot is concerned.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This finally removes the BR2_HAVE_DEVFILES option, that was used to
install/keep development files on target. With the recent migration of
the internal backend to the package infrastructure, we had anyway lost
the ability to build gcc for the target, and install the uClibc
development files on the target.
[Peter: also remove support/scripts/copy.sh]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of using the 'uclibc' target for all toolchain backends,
introduce more sensible target names for the external toolchain and
Crosstool-NG toolchain backend make targets.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The $(O)/toolchain directory, also called $(TOOLCHAIN_DIR) is no
longer needed, as all packages are now built in $(O)/build/, including
gcc and uClibc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Several sub-directories of the gcc code base are in fact not needed
for the Buildroot build: libjava/, libgo/ and gcc/testsuite/ being the
biggest ones. Avoiding their extraction saves quite a bit of disk
space, and compensates a bit the fact that we now extract three times
the gcc source code.
This requires changing the 100-uclibc-conf.patch to no longer patch
files from the libjava/ directory, since this directory is no longer
extracted.
[Peter: add comment about why this is done]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libfloat package was removed in
accbd71154, and therefore since this
commit, the LIBFLOAT_TARGET variable is always empty. We get rid of
the stale references to this variable.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The GCC_STRIP_HOST_BINARIES variable was always defined to 'nope',
which means that the host binaries were never stripped. Get rid of the
corresponding code, which is not in use.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to convert gcc to the package infrastructure, we need a way
of overriding the name of the make target used for the installation of
host packages, just like we have for target packages.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The kernel headers are part of the staging directory, so there is no
reason to point the Busybox CFLAGS directly to them.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The KERNEL_SOURCE configuration option no longer exists in uClibc, so
there's no point in setting it.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that libtpl has moved from sourceforge to github, and there is no longer
a version-specific tarball available.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add new jimtcl package - a lightweight tclsh alternative.
Useful for a lighter footprint usb_modeswitch installation.
tclsh size is ~700kB for ARM compared to ~200kB for jimtcl.
[Peter: wrap help text, fix file header]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Ezequiel Garcia <elezegarcia@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libsvg provides a library for parsing SVG content in files or buffers.
Libsvg does not do any rendering, but instead provides a function-based
interface that can be used by various rendering engines.
[Peter: drop libxml2 conditional]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove lttng-tools-no-sync-file-range-in-uclibc.patch because it got
merged upstream.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Show the user how old the legacy options are, as a
subtle suggestion for him to update mopre often. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 0.8.0 version is at /projects/haserl/haserl/0.8.0, and 0.9.x versions
at /projects/haserl/haserl-devel/.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 2013c and switch to the FTP site since the HTTP one is
unfortunately serving .tar.gz files that are just plain tar files
(uncompressed).
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you use a custom target skeleton with no /var/lib directory,
then the symlink installation in dbus.mk will fail. This patch
fixes this issue by creating /var/lib before creating a symlink
there.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some of the python2 patches were left behind when doing the python3
package. This was because the python build system can now autodetect
what packages can be built in the system.
However, some of these patches are actually useful to reduce drastically
the size of the interpreter.
This patch ports the relevant patches to the python3 package, and adds a
new patch to remove the idle3 IDE as well from the interpreter.
Fixes#5696
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ijs-config (ghostscript) is looked up in /usr/bin, if you've got a host
that has ghostscript with development headers installed then the build
fails when trying to link to the host libijs.
Forcibly disable ghostscript support since we lack a package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The DIRECTFB_CONF_OPT variable was missspelled for disabling the X11
support.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default uClibc configurations strip the resulting binaries/libraries
and don't add debug symbols which is a problem when wanting to debug
issues.
Bind the buildroot BR2_STRIP_* option to uClibc .config DO_STRIP and
BR2_ENABLE_DEBUG to uClibc DO_DEBUG.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libdvbsi++ is a C++ library for parsing DVB SI sections and providing
the output in C++ objects. It's usefull in any case you need prepared
and preselected DVB SI data from the raw stream.
[Peter: fix _LICENSE_FILES tag]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default USERCOMPILE variable uses -fPIE so we bring this back.
This also fixes linking problems for MIPS when non-PIC objects
are used to form a PIC one.
Fixes the following linking problem on MIPS:
connections.o: relocation R_MIPS_HI16 against `__gnu_local_gp'
can not be used when making a shared object; recompile with -fPIC
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes in GPIOs, I2C and DMA.
And since the RPi git tree fork has a non-upstream driver
for rtl8192c WiFi USB stick, there's a fix for that, too.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Patch dropped since the polarssl external library option is now
upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Correcting the indentation inside Config.in. Also adding the missed
license information.
Note: libmicrohttpd is partialy dual licensed, if you don't need or want
to use the HTTPS option you can choose between LPGLv2.1+ and the eCos
license (http://ecos.sourceware.org/license-overview.html).
If you use the HTTPS option you have to agree to the LGPLv2.1+!
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When udhcpc is used on multiple network devices at the same time (or a mix
of dhcp and fixed configuration), /etc/resolv.conf should contain the
union of information from all the interfaces.
Currently that's not the case. The udhcpc script simply overwrites
resolv.conf with the information from the specific interface on each dhcp
bound/renew event.
Fix it by tagging lines with the interface they came from when added,
and drop the affected lines on deconfig/renew. As /etc/resolv.conf is
often a symlink to /tmp (and rootfs might be read only), special care
has to be taken when it is updated.
Notice that I'm not really aware of any official documentation requiring
that '#' comments in /etc/resolv.conf must be supported, but atleast
glibc and uClibc do.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ifconfig up is a no-op if the device is already running, so let's just
do that unconditionally.
Systems might have multiple network devices, and perhaps run udhcpc on
another interface even when booted over nfs, so don't disable the
per-interface deconfig based on the global nfsroot= setting on the kernel
command line.
If you don't want udhcpc to mess with kernel level IP autoconfiguration
(E.G. for nfs boot), you should instead ensure udhcpc/ifup/ifplugd isn't
started for that interface.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We're currently using two different udhcpc scripts, one in the busybox
package and another in the avahi one, which calls avahi-autoipd on
dhcp failures.
The avahi one actually only does something differently from the default
if avahi-autoipd is available, so let's just always use this one instead
of the complicated logic about writing the file if not present /
overwriting it afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit bumps the various LTTng components to their latest stable
version: 0.7.7 for liburcu, 1.1.1 for babeltrace, 2.1.3 for libust and
2.1.2 for lttng-modules.
For babeltrace, the patch
lttng-babeltrace-02-fix-build-old-compilers.patch has been removed
because it has been merged upstream as of version 1.1.1. This is also
the reason why the package no longer needs to be autoreconfigured.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upon logging, dropbear whines if /root is group- or others-writable, and
key-based authentication is attempted, reverting to password-based
authentication:
dropbear[149]: /root must be owned by user or root, and not writable by others
dropbear[149]: Password auth succeeded for 'root' from 192.168.127.35:41566
On my system, /root was 770. Changing to 700 fixed the issue.
Having /root 700 is a good idea, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gvfs can make optional use of libgcrypt so it needs to depend on
it if it is selected. It's also necessary to set the
ac_cv_path_LIBGCRYPT_CONFIG variable to a known value in order
to prevent the AM_PATH_LIBGCRYPT macro from searching the host
paths for the libgcrypt-config script.
Fixes the following build problem when libgcrypt is installed on the
host system but the package is not selected in buildroot:
gvfsbackendafpbrowse.c:31:20: fatal error: gcrypt.h: No such file or directory
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If docbook2pdf is present on the host, the documentation is built, no
matter all the --disable-doc*
But forcing ac_cv_prog_DOCBOOK2PDF to no tells configure that
docbook2pdf is absent, and thus the documentation is not built.
Signed-off-by: Richard Genoud <richard.genoud@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
gst-omx enables OpenMAX based accelerated video decode.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds the gstreamer version 1.x series to buildroot.
[Peter: strip trailing newlines in Config.in]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The argp bundled dependency which is linked to the libwvutils.so
shared library, wasn't built with -fPIC.
MIPS will refuce to link a non-PIC library with a shared one.
We fix this problem by appending -fPIC to CFLAGS and build all the
shared objects with -fPIC.
[Peter: use +=]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
lxp.doc is a module that provides useful features for working with XML
formats in LOM format as used by the LuaExpat project from Kepler.
[Peter: use fixed git revision, github tarball, install -D]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libqmi is a glib-based library for talking to WWAN modems and devices which
speak the Qualcomm MSM Interface (QMI) protocol.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The blkid binary is not any longer installed when libblkid from
util-linux is selected. udev has a builtin blkid command though
and already detects all values that we are interested in. Change
the usbmount script to use the environment variables set by udev
instead of calling blkid directly.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since version 0.3.0, libconfig has been made optional
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already provide BR2_TARGET_GENERIC_HOSTNAME to set /etc/hostname,
so a default /etc/hostname file isn't needed.
More importantly, if the user has explictly set BR2_TARGET_GENERIC_HOSTNAME
to the empty string, we would still end up with a /etc/hostname containing
'buildroot' which is unlikely to be what the user wanted.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A patch from Thomas Petazzoni has been upstreamed in sconeserver; bump version
and remove the patch from Buildroot.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Dhcpcd is an RFC2131 compliant DHCP client.
[Peter: needs ipv6, fix whitespace/file header]
Signed-off-by: John Stile <john@stilen.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This package adds base64 encode/decode functionality for Lua
[Peter: fix file header, use TARGET_CONFIGURE_OPTS, drop quotes around paths]
Signed-off-by: Assaf Inbal <shmuelzon@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: move to libraries, fix Config.in, install into STAGING_DIR]
Signed-off-by: Phil Eichinger <phil@zankapfel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixup iozone's build system to make it somewhat more flexible.
First make our own linux targets for non-AIO toolchains (uClibc) and
non-threading.
And second, just ditch forced largefile support and expect it from
CFLAGS.
Otherwise using the generic target caused issues like:
http://autobuild.buildroot.net/results/19f606f2978dc3c8039b1bccfcc562b4050083c7/
...which is fixed by this.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also added:
- WEBP file format support
- License information
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch-makefile.patch' because it was merged upstream.
This package contains a dispatcher (wrapper) that can be installed as Tcl
script or as binary without further dependency. If Tcl is selected and the
binary interpreter is installed (BR2_PACKAGE_TCL &&
!BR2_PACKAGE_TCL_SHLIB_ONLY) the dispatcher will be installed as Tcl script
otherwise as binary.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'usb_modeswitch_data-fix-parallel-install.patch' because it was merged
upstream.
Remove dependency on Tcl because the dispatcher script has been moved to
usb_modeswitch package.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And select/install jquery-ui since it's almost mandatory.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For certain situations, users may want to install shared FLAT
libraries to the target filesystem even if FDPIC is used as the
primary binary format, or symmetrically users may want to install FDPIC
libraries to the target filesystem even if shared FLAT is used as the
primary binary format.
This commit allows that by:
* Offering additional Kconfig options to install shared FLAT or FDPIC
libraries even when those libraries are not selected as the primary
binary format.
* Preserving all Blackfin toolchain folders under the
TOOLCHAIN_EXTERNAL_DIR, instead of keeping only the one related to
the selected binary format.
* Adding some additional install targets that do the installation of
either the shared FLAT or FDPIC libraries when requested.
[Thomas: refactored code, adjusted commit log]
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper was built with a gcc that uses hash-style 'gnu' by
default, the resulting binary might be unusable on other systems. The error
in this case is "Floating point exception".
Using hash-style 'both' solves this issue.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of a long list of the ARMv7-A Cortex-A, use a conditional
based on BR2_GCC_TARGET_ARCH to hide/show toolchains that are only
usable on ARMv7-A.
However, in the comment related to Linaro toolchains, we keep
mentioning Cortex-A{5,8,9,15} because that's what users see when they
select their architecture variant.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We add support for Linaro 2013.04 and Linaro 2013.05 and remove
support for Linaro 2013.01 and Linaro 2013.02.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove 'strace-fix-arm-bad-syscall.patch'. This patch had been integrated
in v4.6 (commit: 9bc6340d2) and was later replaced with a generic solution
in v.7 (commit: 2ce12ed31c2).
Strace still cannot handle non-LFS environments, so a modified version of
strace-fix-disabled-largefile-syscalls.patch remains. The 64-bit syscalls
(sys_truncate64, etc.) are references in the sysent structure but the
functinon definitions are commented out becuase of the missing LFS support.
The workaround for the 'forced lfs mode' doesn't seem to be necessary anymore.
Build tested on arm w and w/o LFS support.
[Peter: arc still not supported]
Signed-off-by: Chris Zankel <chris@zankel.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Pass --disable-strict to avoid having -Werror in CFLAGS.
Having -Werror in CFLAGS can lead to build problems depending
on the gcc version that is being used and it should not be used
in released code.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Upstream changed their distribution tarball site.
Thanks go to Andrew Scheller from bug #6308 for noticing and reporting.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Buildroot uses a normal ARM compiler to build the AM33X CM3 firmware
(which runs on a Cortex-M3 processor), but Buildroot will have a
default -march value that doesn't necessarily match the one needed for
Cortex-M3, leading to build failures (gcc complains that the
-mcpu=cortex-m3 option being passed is not compatible with the
selected -march).
Fix this by explicitly indicating -march=armv7-m.
Fixes:
http://autobuild.buildroot.net/results/db1/db13623b1701bfe678c302e8f88c7473cb2345f9/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove bison-2.6-compat patch as it has been incorporated upstream.
Remove fix build issue with old gtk as gtk has been bumped to a newer
version.
Remove fix-build-with-gcc-4-6 as it has incorporated upstream.
Remove directfb patches due to depreciation
Remove pool patch as it is no longer required
Remove pthread_getattr_np as webkit no longer uses this function.
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Drop DirectFB support from libgtk2
* bump libgtk2 to version 2.24.18
[Peter: fixup patch whitespace changes]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch bumps libglib2 to version 2.36.1. In addition this bumps glibmm
and glib-networking to 2.36.1.
Signed-off-by: Spenser Gilliland <spenser at gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
And mark 3.8.x series as deprecated to match upstream.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Updating brings in a new bootloader that enables more free codecs:
MJPEG, VP6, VP8, Ogg Theora and Ogg Vorbis
Also, the command-line definition has moved to its own file, now.
Although the legacy 'cmdline' variable seems to still be supported
for a little while, better switch now than forget when we upgrade
later.
Update the RPi board readme accordingly.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When BR2_PACKAGE_ARGP_STANDALONE is enabled and built before p11-kit the
configure script detects it and a conflict arises because libc already
includes and defines program_invocation_short_name.
Avoid this by forcing the detection to true otherwise the configure
script tries to use argp-standalone and it clashes with libc. Fixes:
http://autobuild.buildroot.net/results/a39/a39fe81a356b922a891d4225a56ce2427ab5bca7/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
bwm-ng is a networking application, not a system one.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages (kmod, e2fsprogs, ..) contain multiple (different) license
files with the same file name, but in different directories.
These are currently all copied to the same filename in
output/legal-info/licenses/<pkg>, overwriting everything but the last file.
Fix it by recreating the same directory structure under legal-info.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libkmod is licensed as LGPL, while the kmod tools are GPL.
We always install libkmod, but conditionally install the tools.
This patch adjusts the license variables accordingly.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
genext2fs is built only if the user selected an ext2 root filesystem.
However, some use-cases can't live with the full target/ dir on the
root filesystem, and requires separate partitions (eg. for /usr).
In this case, the user would not select an ext2 root fs in the
Buildrooot menu, and would only generate a tarball of the rootfs.
This tarball would then be used from a post-image script to build
the actual required FSes.
But then, genext2fs is not built, since the ext2 root FS was not
selected.
As for the other filesystem generators, provide a host variant of
genext2fs (genext2fs is already host-package aware, so only needs
adding a Kconfig entry).
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump version to get a few new firmware files for some WiFi adapters.
In the rtl81xx familly, it's hard to differentiate each members: I have
a USB stick that identifies itself as TRL8188CUS, but is handled by the
rtl8192ce driver. So I moved all of rtl81xx firmwares under the same
option to avoid confusion.
It will be the responsibility of the user to eventually get rid of
unwanted firmware files in a post-build script, if needed.
Ditto for rtl87xx.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There are a buncha fixes that are not available in a release yet.
Needs refreshing our patches.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The following patch adds support for ecryptfs-utils.
http://ecryptfs.org/
[Peter: needs host-intltool, fix typo in help text]
Signed-off-by: Marcin Bis <marcin@bis.org.pl>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If ext-toolchain-wrapper or any symbolic link to it was resolved by PATH,
the wrapper takes the working directory to calculate the relative paths.
Now '/proc/self/exe' is used to resolve the absolute path to the toolchain
directory if the wrapper was called neither with a relative nor an absolute
path.
[Peter: fix off-by-one, swap value == var checks around]
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Added support for mysql and sqlite plugins. Configuration is based on qt package.
[Peter: strip trailing spaces]
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This forces bmake to call the wrapper, not itself.
Also, use consistent "${0/*}" instead of "${0/pmake}".
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When qt5 is built with EGLFS support, libQt5OpenGL library should be copied to
target.
Signed-off-by: Wojciech Slenska <wojciech.slenska@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).
In the case of gutenprint, the patch hook executed for the target just
creates one directory which is needed for autoreconf to work, and the
host variant is not autoreconf'ed. So there is no harm in also
applying this patch hook to the host variant.
[Peter: autoreconf for host as pointed out by Arnout]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the out-of-tree support, it is important that all
packages have the same patch hooks for the host variant and the target
variant (because the source tree will be shared between host and
target variants when doing out-of-tree build).
In the case of the xlib_libX11 package, the post-patch hook removes
some flags from the build of the makekeys utility, so that when
xlib_libX11 is built for the target, the build of makekeys for the
host works properly. This modification can be applied to the host
variant of xlib_libX11 without any problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
There used to be a post-patch hook to apply a patch only on the host
variant of libgtk2. However, after the reorganization of the patch
naming policy, this was no longer working properly, so
dd1848bc73 changed this by a patch that
works on both the target and host variants.
We can therefore get rid of the useless post-patch hook.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the gettext source code was being patched differently for
the host and the target build, which is going to be incompatible with
out-of-tree build. The difference is that the gettext tools could be
disabled in the target build, but are always enabled on the host
build.
Therefore, this commit switches the gettext package to using proper
patches against the relevant configure.ac and Makefile.am
files. gettext is now being autoreconfigured. Configuration options
are also passed for the host variant, in order to disable the build of
a large number of things we don't care about.
Finally, the two existing patches are renamed to include a number in
their filename.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
this adds the libopenmax virtual package for hardware based video acceleration
[Peter: fix openmax-without-any-backends check]
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Currently, /home/default is mode 2755 which means it is setgid.
Since /home/default is not group-writable, it is useless.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
I believe the original intent was to make it that the configure step
for the opengl virtual packages fails if there is not at least one
dependency. This patch fixes the logic so that it actually fails if
dependency list is empty
Signed-off-by: Will Wagner <will_wagner@carallon.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes the following compilation problem when building with 'make -s'
Unknown option "-q".
See ./configure --help for available options.
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This bug caused udev to fail to load any module, crashing with Illegal
instruction.
The patch was taken from upstream and should be integrated in the next
version of kmod (version 14)
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libtirpc fails to build with the Blackfin external toolchains provided
by Analog Devices, because their uClibc configuration doesn't include
AI_ADDRCONFIG. In order to prevent such build failures to happen, we
simply prevent libtirpc from being selected when such toolchains are
used. This is not a big problem, since they provide native RPC
support.
Also, since they provide native RPC, we don't have to propagate this
new dependency to the reverse dependencies of libtirpc, because they
all use native RPC when available. The exception to this rule is the
rpcbind package, which can only use the libtirpc implementation of
RPCs, and not the native one of C libraries. Therefore, the dependency
is propagated to the rpcbind package.
Fixes:
http://autobuild.buildroot.org/results/58b/58b16449065c16afce11ba120db56839efb2b1ea/build-end.log
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Just like we do for many other GNOME-hosted tarballs, use a
<pkg>_VERSION_MAJOR variable for network-manager.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch adds a new package for the OpenGL, OpenVG and EGL
proprietary implementations specific to the Vivante GPU of i.MX6
processors.
[Peter: show comment on uClibc toolchains, tweak help text]
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit moves the firmware-imx package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit moves the imx-lib package to the newly introduced
freescale-imx/ directory, and uses the new variables provided by
freescale-imx/freescale-imx.mk.
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The freescale-imx directory is intended to contain all freescale
i.MXyy related packages, together with their download site and version
info
Signed-off-by: Henk Fijnvandraat <h.fijnvandraat@inter.nl.net>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The at91bootstrap build sometimes fail when doing parallel builds.
Build it without parallel build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Turned out that setting a nil-UUID is no better than clearing it.
What currently happens is as follows:
- first, genext2fs does not generate a UUID
- then we tune2fs to upgrade the filesystem
- then we run fsck, which generates a random UUID
- then we re-run tune2fs to set a nil-UUID
So, on the target, if the file system is improperly unmounted (eg.
with a power failure), on next boot, fsck may be run, and a new
random UUID will be generated.
*However*, fsck improperly updates the filesystem when it adds the
UUID, and there are a few group descriptor checksum errors.
Those errors will go undetected until the next fsck, which will then
block for user input (bad on embedded systems, bad).
Fix that by systematically generating a random UUID _before_ we call
to fsck.
A random UUID is not so bad, after all, since there are already so
many sources of unpredictability in the filesystem: files date and
ordering, files content (date, paths...) which renders a fixed UUID
unneeded.
And it is still possible to set the UUID in a post-image script if
needed, anyway.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of doing some nasty SED tricks, use a patch that modifies the
bzip2 build system to make it a little bit nicer. Those SEDs were made
differently for the host and target packages, which is contrary to the
logic of not having any difference in the source tree between the host
build and the target build.
This commit also makes sure that bzip2.mk behaves properly in a
BR2_PREFER_STATIC_LIB=y context.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a Xtensa specific patch needs to be applied, it should be applied
both when doing the target and the host build.
This change is part of the effort to remove the differences between
host and target post-extract and post-patch hooks, that are
problematic for the out-of-tree support.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The attr-0001-attr-Fix-static-build-installation.patch has been integrated
in the new upstream version.
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since fe6a9e5e9d (flex: needs M4 at runtime), the autobuilders have
been producing a number of flex related build failures. They have been
hard to track down, because even on the same machine, with the same
Git commit ID and the same configuration, the failure could not be
reproduced.
However, a close inspection of flex's config.log file allowed to find
out what the problem was. In its configure script, flex uses the
host-flex to generate a minimal example, and find out the name of the
output file of flex.
When the M4 environment is passed when building the target flex, it
also affects the *execution* of the host-flex, which tries to use
/usr/bin/m4 (which doesn't exist in the autobuilder machines) instead
of the one built in $(HOST_DIR)/usr/bin/m4. So generating the minimal
example fails. And this is where what I could reproduce and what the
autobuilders script produce differ: in my case, even though host-flex
fails to run, it creates an empty lex.yy.c, which is enough to make
the configure script happy. In the context of the autobuild scripts,
this file is apparently not created at all, for an unknown reason, and
this leads to the configure script to abort.
The fix is to set ac_cv_path_M4. This will affect the default m4 used
by the target flex, but it will not affect the m4 used by the
host-flex. It allows the test made during the configure script to work
properly, and therefore should fix the issue seen in the autobuilders.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
"tune2fs -U clear" creates an invalid filesystem, that fsck.ext2
whines about later:
$ make rootfs-ext2
[--SNIP--]
$ ./host/usr/sbin/fsck.ext4 images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
Filesystem did not have a UUID; generating one.
images/rootfs.ext2: clean, 4616/5120 files, 53171/131072 blocks
$ ./host/usr/sbin/fsck.ext4 -f images/rootfs.ext2
e2fsck 1.42.7 (21-Jan-2013)
One or more block group descriptor checksums are invalid. Fix<y>? yes
Group descriptor 0 checksum is 0x4131, should be 0x8bdb. FIXED.
[--SNIP--]
So we set an explicitly NULL UUID instead.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For proper runtime execution, flex requires m4 to be
installed. Passing a M4 variable at configure time is needed,
otherwise flex on the target will try to use a 'm4' binary with a
build machine path.
Fixes bug #4988.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ADI officially supports the buildroot and related GNU toolchain for
Blackfin since ADI's 2012R1 release only. In order to avoid confusion,
it is better to remove the 2011R1 GNU toolchain for Blackfin. In
addition, the 2011R1 GNU toolchain for Blackfin doesn't support the
BF60x processors.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When thread support is disabled, the libitm and libatomic libraries
from gcc should be disabled, otherwise, the build of gcc fails.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For a reason that's fairly unclear to me, Peter added a '-lz' link
flag to the elf2flt.mk build in d5664ee99 ("elf2flt: fix link").
However, the zlib library may not necessarily be installed on the host
machine, so we should depend on host-zlib, and pass the appropriate
LDFLAGS. This is what this patch does.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enclose all dropbear sub-options into a 'if BR2_PACKAGE_DROPBEAR'
... 'endif' block rather than having 'depends on BR2_PACKAGE_DROPBEAR'
for each option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Thomas: updated to 2.0.8, restricted to supported architectures,
added licensing informations, updated to latest Buildroot package
infrastructure]
[Peter: Fix LICENSE_FILES typo, needs largefile support in toolchain]
Signed-off-by: Will Newton <will.newton@imgtec.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We ran into a "Login incorrect" problem when running the same rootfs
image across platforms with different loging ports ttyS0/1/2/3.
Simply assignning "console" to BR2_TARGET_GENERIC_GETTY_PORT, which in
turn modifies the /etc/inittab, is not enough because the "console" device
was missing in the /etc/securetty.
While current securetty has enumerated a lot of ttys, this patch should save
some efforts to enumerate more.
[Peter: guard with single quotes]
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Spenser Gilliland <spenser@gillilanding.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A couple of patches make use of XXX_POST_UNINSTALL_TARGET_HOOKS, which
is not a hook set that Buildroot actually supports.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes the build on AArch64 (and potentially others).
The patch has been submitted upstream.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This reverts commit d66cd067f3.
SSL certificates are no always installed in /etc/ssl/certs. For example, on
CentOS 5.6 the default OpenSSL certificates directory is /etc/pki/tls/certs,
and wget can download using https without any problem.
Moreover, the existence of /etc/ssl/certs does not guarantee the presence of a
CA certificates bundle even on Debian. On my current Debian testing
installation the openssl package itself creates an empty /etc/ssl/certs
directory.
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch fixes a build failure on AArch64 (and potentially others).
Make sure sys/select.h is included before using select(2).
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Missing defines for:
aarch64, arc, blackfin, microblaze & xtensa.
Not properly supported: mips - only defines generic mips as BE, doesn't
know about mipsel (LE) thus assuming it's BE.
Fixes:
http://autobuild.buildroot.net/results/9847702b046bed59b07f0e075a58b1f31e9236ce/
This should be pretty straightforward to fix in
Foundation/include/Poco/Platform.h for interested parties since it only
cares about endianness.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The boost context library needs porting to each new architecture
and only a limited number of ports are currently available.
Signed-off-by: Will Newton <will.newton@linaro.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Source code has workaround for missing {get,make,swap}context on ARM,
so mongrel2 doesn't need glibc/uclibc snapshot when built for ARM.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise, graph-depends tries to call 'make target-purgelocales-show-depends',
which does not exist, as 'target-purgelocales' is not an actual package.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Even though xinit isn't included in the X11R7.7 release it is very
useful for debugging and quick tests.
Reinstante it without xdm requiring it though.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The graph-depends script tries to call 'make target-generic-dont-remount-rw',
which doesn't exist since 'target-generic-dont-remount-rw' is not a package.
See also the comments for commit 72bd61e5b8c2094378.
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the FW needed for the Cortex M3 on the beaglebone. This is required
for working power management.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Without this firmware, the beaglebone won't be able to suspend/resume
correctly.
[Peter: tweak Config.in, rename init script, wrap long lines]
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As the beaglebone support is mainlined, there's no support for the old
board setup files, and the only supported run-time configuration is through
the device tree.
We're also setting the kernel headers to follow the 3.8 series.
Signed-off-by: Anders Darander <anders@chargestorm.se>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the LZO compression mode is chosen the linux kernel requires
lzop host utility at build time.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If a package's _LICENSE_FILES contains the name of a non-existent file,
the make process would continue and return true, unless the
non-existent file is the last listed.
Fix this wrong beaviour by failing with an error when any of the listed
files is missing.
Reported-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build failure when the build host has gpgme installed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
curlftpfs may pick up the distribution curl-config rather than the one
in the staging area thus failing to build.
Fix it by hardcoding the curl-config path.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mysql_client is set instead of added, thus eliminating libpthsem.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script doesn't detect that the target is posix-compliant
and tries to use a custom version of segfault analysis that actually
doesn't build. Most likely, it's because the configure script doesn't
support linux-3.x. Anyway, we can just tell configure that we're
posix-compliant.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For some reason (probably because the ARC changes modify some lex/yacc
files without updating their pre-generated variants, or because the
date/time of the pre-generated files is not correct), building the ARC
gcc requires host-flex and host-bison.
We have tested 4.2 for AVR, 4.3 and 4.4 for ARM, and none of those
need host-flex or host-bison to be installed, so only the 4.4 for ARC
seems to be affected.
Fixes the build failure visible at
http://autobuild.buildroot.org/results/673c6262e3dde8ee8dd28204d814097e6ba8f8e9/build-end.log.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since gcc doesn't use the package infrastructure, it doesn't get all
the good generic environment variables, and forgets to get
$(HOST_DIR)/usr/bin in its PATH. This prevents gcc from finding and
using host tools built by Buildroot.
This patch therefore ensures that $(HOST_MAKE_ENV) or
$(TARGET_MAKE_ENV) are passed at the appropriate locations. It will be
useful for a later patch that makes gcc depend on host-flex/host-bison
in some situations.
Original patch by Thomas Petazzoni.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script gets orcc from pkg-config, which sets it to /usr/bin/orcc
instead of $(HOST_DIR)/usr/bin/orcc. So set the path explicitly instead of
relying on pkg-config.
While we're at it, also add an explicit enable/disable to configure.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
filemq uses asciidoc for its documentation. asciidoc uses python and import
the unicodedata module, which is not in host-python. So disable asciidoc
entirely.
This doesn't get hit by the autobuilders because they don't have asciidoc
installed in their chroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The commit e3eadd doesn't (no longer?) exists in the upstream git, so
replace it with the latest commit to date.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
czmq uses asciidoc for its documentation. asciidoc uses python and import
the unicodedata module, which is not in host-python. So disable asciidoc
entirely.
This doesn't get hit by the autobuilders because they don't have asciidoc
installed in their chroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Support for ocf-linux or cryptodev-linux added a dependency of host-openssl
on host-ocf-linux / host-cryptodev-linux, which we don't have and the
dependency is anyway not needed.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
classpath doesn't work with Qt in buildroot. It assumes qt will run on X11,
but we don't have qt-x11 support on buildroot.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Otherwise the comment would only show up when both conditions are true
instead of any of them.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using lttng-tools for userland tracing with lttng-libust lttng-modules
is not required, thus a dependency on building lttng-modules and a kernel is
overkill for lttng-tools. It also hides it from a user not wanting to build
a kernel. A comment has been added to lttng-modules to show a user that
lttng-modules is dependent on a kernel build.
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current code spawns as many jobs as up to twice the number of CPUs.
On small-class machines like laptops, with a limitted amount of memory,
but still a few CPUs (real or hyperthreads), the HDD becomes a bottleneck,
and it becomes almost impossible to do anythiong else while there is a
build in progress.
Limit the number of jobs to the number of CPUs plus one.
Even on fast machines with fast HDDs, this settings keeps the machine
fully busy (for those packages that can build in parallel, of course).
For example, building qemu or the linux kernel kept my hyperthreaded
hexa Core i7 with 18GiB of RAM, busy at 99% (I never ever managed to
get 100% even with more jobs, not even 200); while on my hyperthreaded
dual Core i5 with only 4GiB and a slow HDD, I still topped at 100% CPU,
while still able to do some work involving the HDD.
If the number of processors is not available, assume one.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Nathan Lynch <ntl@pobox.com>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Reviewed-by: Nathan Lynch <ntl@pobox.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already remove python2.7-config and the symbolic link
python-config, but we forgot to remove the python2-config symbolic
link.
Note that we can't use the <pkg>_CONFIG_SCRIPTS mechanism here because
python2.7-config is written in... Python, and doesn't follow the usual
syntax of <pkg>-config scripts. It takes the paths directly from
distutils.sysconfig.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a configuration that provides a basic setup for generating
bootable nandflash images:
- at91bootstrap
- barebox
- kernel
- rootfs
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For more info, please read board/telit/evk-pro3/readme.txt
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the ptpd2 package, handles the IEEE 1588-2008 spec which is not
backward compatible to IEEE 1588-2002.
[Peter: mark init script as executable]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the new ptpd package, loosely based on the one from bug #2305.
This one handles the IEEE 1588-2002 spec.
[Peter: mark init script as executable]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The external toolchain logic checks (and finds) the proper ARCH_LIB_DIR
and forcibly copies it to */lib even if it's in */lib64
This is all well until the check is done for create_lib64_symlinks which
only verifies if ARCH_SYSROOT_DIR/lib64 is a symlink, which in some
toolchain it's a real directory (like sourcery x86_64 2012.09) and thus
doesn't make the symlink in the target.
Fix this by also checking for a real directory.
Easily reproducible by running "make qemu_x86_64_defconfig", switching
to an external toolchain before build, building and then trying to run
the resulting image.
Closes bug #5054
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
During the compilation of wvstreams, a number of strict aliasing
related warnings are shown, making the build quite noisy. Turn
warnings off using the --disable-warnings option.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bumping this package is needed, because json-c 0.10 has a major
defect: it installs a library named libjson.so, which conflicts with
the library installed by the libjson package.
This has been changed in the upstream json-c 0.11 version, which now
installs libjson-c and json-c.pc.
It allows to solve the Pulseaudio link problem, which wants to link
against json-c but happens to link against libjson when libjson has
been compiled and installed after json-c.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
python-nfc uses libusb that requires a toolchain with threads support
Signed-off-by: Gilles Talis <gilles.talis@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For the following reasons:
- it used to be broken without anyone noticing for a long time,
- it is still not fully integrated within the Buildroot set of options,
- it has not gained much traction (not even I use it),
- I've always argued that sustained development should use an external
toolchain, and not rely on building one with Buildroot,
- I did not submit any of the enhancements requested during the last
developpers' day in Brussels,
- I have neither the incentive nor the time to maintain and enhance it,
it is time to deprecate the crosstool-NG backend for the 2013.05 release.
Then, it will be entirely removed early in the 2013.08 cycle, to let some
time for those that rely on it to voice their opinions. ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some board configs where left out of the u-boot custom version
migration, so do it otherwise they'll just pull the latest version which
might not work and brick the device.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add custom version option as used in the linux kernel and barebox.
This way we can easily specify newer and older version.
Remove the list of the older versions because is obsoleted
by the new custom version option that is more flexible.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add Python bindings for the Apache Thrift RPC.
Thrift is an interface definition language that is used to define and create
services for numerous languages using remote procedure calls (RPC).
This patch does not include the Thrift code generator. It only includes the
Thrift libraries used at runtime.
Signed-off-by: Tiago Maluta <tiagomaluta@gmail.com>
Signed-off-by: Vinicius Tinti <viniciustinti@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Current versions of libnl (since 3.2.4, at least) do not appear to
require MAKE1.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch to distribute fork since it's maintained and fixes a few issues
while bumping to version 0.6.36.
There's work upstream in re-merging with setuptools which is now
supposedly maintained, see
http://mail.python.org/pipermail/distutils-sig/2013-March/020126.html
Buildroot python packages should use --single-version-externally-managed
and --root=/ in the install phase even if they're not setuptools-based.
This is because the default is to build egg files (zip files) for
packages to support multiple target versions, and since the packages
should be handled by buildroot infrastructure that's not needed.
Also potentially doing double-compression is time-wasting (i.e. egg
file and target filesystem) when running on slow targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We want --single-version-externally-managed (and --root=/) to make
python packages uncompressed (python eggs are zip files) since
compression should be a target filesystem responsibility.
And we don't need/want multiple versions of the same package in the
target since packages should be handled by buildroot on any sane
embedded system.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The base theme is no longer available in the themes download (it is the
standard theme installed by jquery-ui), so default to ui-lightness instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop CSS path option, depend on jquery-ui, misc cleanups]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: select jquery, update for generic-package, drop _PATH options]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use a option name that doesn't change for every new 3.x version.
It's easier to maintain and consistent with barebox.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add custom version option as used in the linux kernel.
This way we can easily specify newer and older version.
Remove the list of the older versions because is obsoleted
by the new custom version option that is more flexible.
Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's mostly sample code, normally not used, and has a bad shebang line.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 8d929f4b ("toolchain/gcc: Only enable --with-float when it makes
sense") restricted the --with-float use to only MIPS, ARM and SPARC,
while it seems that powerpc needs it as well.
Fixes the qemu_ppc_virtex_ml507_defconfig build.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 75b7dc68 ("linux: default to 3.9, remove 3.8") made 3.9 the
default kernel version.
The omap kernel switched to multiplatform kernel during the 3.9 kernel
development cycle. Obviously, the uImage generation doesn't work anymore
with multiplatform kernels, since you have to provide the kernel load
address, resulting in a build error.
Lock down the kernel version to 3.8 to keep the old behaviour until
someone submits a patch to switch to multiplatform kernel.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 14f48861 ("arc: Add ARC and ARC BE architecture") introduced a
sed match against arc* buildroot architecture to translate it to arc.
This causes a problem with armv8, which is called in buildroot aarch64,
which is also matching, resulting in a build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the --executable shebang fixup option to the build phase so that the
script ends with a proper #!/usr/bin/python interpeter line set.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 0.11.6
Add the --executable shebang fixup option to the build phase so that the
script ends with a proper #!/usr/bin/python interpeter line set.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that the openssl OCFs option is gone we need to switch to the package
option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Unfortunately because of header file differencies this can't be used for
OCF.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Allow openssl to use cryptodev-linux hardware crypto support besides
OCF.
To do this we remove the OCF option from openssl and automatically use
any of the available implementations when available.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
cryptodev-linux is an alternative implementation to ocf-linux.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Remove the OCF linux kernel extension instead opting to build ocf-linux
modules out of tree.
This is easier for users since no kernel config tweaking is required.
On the downside the OCF drivers can't be used, but then all of the
kernel crypto drivers are available to users via cryptosoft which is
preferred.
Also remove it from the menu to utilize a virtual.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adds the possibility to have a free-form CPU revision string and append it
to the target CPU. Only Blackfin actually uses this option.
Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update for generic-package, add license info]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also make sure that older kernels are not selected for ARC.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
According to gcc/config.gcc, only ARM, MIPS and SPARC have the
"--with-float" option when configuring gcc.
[Peter: sort list]
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For ARC, libgcc is always included, even when -nostdlib is given. This is
related to some small pieces of code that are not always generated by the
compiler; a call to libgcc is used in those cases instead.
During the initial stages of building the toolchain, this is a problem, as
libgcc does not exist yet. The ARC compiler supports -really-nostdlib to
override the default behavior.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
ARC needs a specific GCC for now, while we wait for ARC support to get
upstreamed.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As ARC support is not yet in all upstream packages, a different location is
required to download the packages from. This adds an option to specify a
site for ARC-specific versions of packages such as binutils, gcc.
When ARC support has been upstreamed for all packages, this option can be
removed again.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Synopsys' DesignWare ARC Processor Cores are a family of 32-bit CPUs that
can be used from deeply embedded to high performance host applications.
Signed-off-by: Mischa Jonker <mjonker@synopsys.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fix libdmalloc*.so files being deleted from the staging directory as the
package is installed into the target.
Signed-off-by: Reuben Dowle <reuben.dowle at 4rf.com>
pulseaudio documentation recommends not using the daemon mode unless you
are on a headless system, but since that is the common case for a
buildroot installation, install the related user and groups
[Peter: fix typos, ifeq check, unconditionally install into target]
Signed-off-by: Jérémy Rosen <jeremy.rosen@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This option allows users to specify the maximum level for compiled-in
debug messages with -1 being none.
In a typical scenario of nmbd+smbd+smbpasswd this can save a full
megabyte of target space.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
inotify-tools includes a shared library, which should be installed in the
staging directory
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the jquery-keyboard package based on Simon Dawson's patch with a
newer version and improvements (license, select jquery, install
layouts).
[Peter: don't use install -D when destination is a directory]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since there is no need to edit the generated list, we don't need
to keep the files under git control, so remove the existing lists.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The generated lists are automatically updated when building the manual.
[Peter: fix typos]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: indentation, remove temp dir, intro to host utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: one more stuff->feature fixup]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Script generating the target and host package tables, and the deprecated
stuff list as well. These tables and lists are generated parsing the
Config.in files.
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: no leading dot, no menu path for host-utils]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
[yann.morin.1998@free.fr: rename readme so it is obvious it's about kconfiglib]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Initially, a "cp" was used for the one-time target skeleton
installation, and an "rsync" was used for the every-time overlay
skeleton installations. Then, the target skeleton install was
changed to also use rsync (1cd3f992fb).
Now there are two rsyncs, but with different filter specs, which
seems odd.
This patch adds --excludes to both invocations of rsync to make them
consistent, and removes the -u option from the initial target skeleton
installation.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The default name of the kernel binary for the RaspberryPi is kernel.img,
it's only a zImage kernel renamed. Since Buildroot will build a zImage, the
default config should use the zImage name instead of forcing the user to
rename a file.
This patch also remove the cmdline argument rootfstype. There is no point
forcing the user to use ext4 for its root partition.
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
DirectFB comes with incorrect declarations for *SetRegion* datatypes,
this breaks the build for some GFX Drivers. Also there are some headers
missend in the archive, this breaks some other modules of directfb that
not covered yet by the autobuilders.
And at least the configure script doesn't use a variable for the
imlib2-config script. That breaks crossbuilds of directfb in most cases.
Fixes:
http://autobuild.buildroot.net/results/03465f0e14accc8d8f8fc2640b7a0dd8bec594e4
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: drop noauth patch, cleanup Config.in, don't install to staging, ..]
Signed-off-by: Charles Manning <cdhmanning@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Makes the code uniform with the post-build and post-image implementation
(which is slightly simpler and, presumably, more efficient).
Signed-off-by: Luca Ceresoli <luca@lucaceresoli.net>
Reviewed-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
xkeyboard-connfig was selectable only if X.org was enabled. However,
weston, the reference implementation of the Wayland protocol, also
needs xkeyboard-config, so we have to make this package available
outside of the if BR2_PACKAGE_XORG7 ... endif conditional.
In addition to this, the xkeyboard-config currently pulls in
xapp_xkbcomp as a runtime dependency, but this dependency is only
needed with X.org. And it also pulls in xlib_libX11 and xproto_proto
as build-time dependencies. But in fact those ones are runtime
dependencies, and they are only needed under X.org. This helps
reducing the number of dependencies of xkeyboard-config in a
weston/wayland configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The old BR2_PACKAGE_PTHREAD_STUBS option (kept for legacy support) now
selects the BR2_PACKAGE_XLIB_LIBPTHREAD_STUBS option, but this creates
a consistency warning from kconfig, because the new option has
BR2_PACKAGE_XORG7 as a dependency.
Since the old option also had BR2_PACKAGE_XORG7 has a dependency, we
make the legacy config option depend on BR2_PACKAGE_XORG7 to avoid
this warning.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The uClibc test suite can be installed on the target thanks to the
BR2_UCLIBC_INSTALL_TEST_SUITE option, but it requires make to be
installed on the target. Since the make package is currently marked as
deprecated, it leads to the following warning:
warning: (BR2_UCLIBC_INSTALL_TEST_SUITE) selects BR2_PACKAGE_MAKE which has unmet direct dependencies (BR2_DEPRECATED)
We fix this by undeprecating the make package, and also update its
description to explain why we have the make package even if we don't
have support for building a toolchain for the target.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mysql_client package is only available on architectures having a
MMU, so all packages that are selecting mysql_client should depend on
BR2_USE_MMU.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The configure script nicely supports a preconfigured directfb-config
(using ac_cv_path_DIRECTFBCONFIG), except for when it checks the directfb
version where it simply uses whatever directfb-config is in the path,
breaking the build when this isn't available / recent enough.
Fix is to use the correct one instead. As SDL doesn't autoreconf cleanly,
also patch the generated configure script.
Finally move the ac_cv_path_DIRECTFBCONFIG setting under the directfb
conditional as it is only needed there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
After switching directfb to 1.6.3 sawman must also be bumped to the
current version because the old version can't be builded with newer
libs and headers from directfb.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The previous version 1.2.0 isn't acting well with directfb 1.6.3 so
increasing the version to the latest available version on directfb.org.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Related to the changed directfb variables for
BR2_PACKAGE_DIRECTFB_DITHER_RGB16 and
BR2_PACKAGE_DIRECTFB_TESTS
adding a legacy check.
[Peter: fix DIRECTB_TESTS typo]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Adding a helper string for the PXA3xx and graphics driver from Marvell
and the EP9x graphics driver from Cirrus Logic.
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To be identical to the version of directfb switching also to version
1.6.3. The divine package needs at minimum directfb 1.6.0 as
dependencie.
Adding the license information to the package divine.
Also switch to Git for getting the package source because the tar.gz
for version 1.6.3 on directfb.org is broken because of a missed header
file inside.
[Peter: tweak comments]
Signed-off-by: Carsten Schoenert <c.schoenert@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 1.12.4 and add a security patch for CVE-2013-1940.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: move directly under neardal option so it gets indented]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Packages that install daemons may need those daemons to run as a non-root,
or an otherwise non-system (eg. 'daemon'), user.
Add infrastructure for packages to create users, by declaring the FOO_USERS
variable that contain a makedev-syntax-like description of the user(s) to
add.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Samuel Martin <s.martin49@gmail.com>
Cc: Cam Hutchison <camh@xdna.net>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
the integrator926 defconfig has not been updated for quite some time,
and is still asking for very old linux and u-boot releases. Now that
these versions aren't present in Buildroot anymore, they default to a
newer release, where, in the u-boot case, the defconfig name has
changed, leading to a build failure.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
sftp expects to find sftp-server in the standard (/usr/libexec) location,
so ensure it gets installed there.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Factorize all the "depends on" into "if...endif" blocks
All the UBIFS options use "depends on BR2_TARGET_ROOTFS_UBIFS" but
we can simplify the config file by enclosing them in an "if..endif"
block.
Signed-off-by: Mark Jackson <mpfj@newflow.co.uk>
Acked-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add support for LZO and XZ compression methods to cpio, ext2, tar and
ubifs filesystem targets.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libxml++ is a C++ wrapper for libxml2.
[Peter: misc Config.in fixes]
Signed-off-by: Nicolas Ménégale <nicolas.menegale@openwide.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Poppler is a PDF rendering library based on the xpdf-3.0 code base.
[Peter: Fix license, comment text and drop explicit library options]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also work around a build failure for ARM thumb mode which was also
present in the previous versions.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Update the mdev patch so that subsystem matching is reintroduced.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Note that the Python binding is disabled; we can't build this in Buildroot
without the sipconfig Python module for the host.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On commit 5538e47662 the versioned package
patches changed the directory structure but the packages weren't fixed.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
It's now been a while since it has been possible to build the kconfig
parser to understand a prefix other than CONFIG_, and even no prefix
at all, by setting the CONFIG_ macro (#define) at biuld time.
Just use that, insted of patching, it will make it easier for us in the
future.
Our patches have been refreshed at the same time.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit a0b6faa ("gdb: convert to the package infrastructure") changed
the name of the host gdb configuration option, and added it to the
legacy option set, leading to a build breakage for the
armadeus_apf9328_defconfig.
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The IRQ mapping failures have been fixed in 3.8.8 so update it to the
latest kernel series.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since openssl's path is '/etc/ssl/' (specified in our openssl package),
we should also make sure that's what curl is using.
Previously, it's hasn't been specified, which means it changes depending
on the host system where it's compiled.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add the swig package, host-variant only since toolchain on the target is
deprecated and this package wouldn't serve any purpose.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Useful for the upcoming host-python-m2crypto package.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Don't change the busybox STATIC option if buildroots PREFER_STATIC_LIB option
is not set. Not to prefer static linking doesn't imply prefer dynamic linking
for all packages.
Signed-off-by: Patrick Ziegler <patrick.ziegler@fh-kl.de>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to version 9.1 which includes mitigations against BEAST and the RC4
vuln.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Enable agentx support by default, it's required for newer versions of
quagga.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Each qt5 package was defining its own QT5<something>_SITE
variable. Unfortunately, the download location has slightly changed
for Qt 5.0.2, so we would have to change it for all packages. Instead,
we factor the <pkg>_SITE variable as QT5_SITE in package/qt5/qt5.mk,
just like we already do for QT5_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When a FOO_SITE variable ends in a slash and gets joined with a
FOO_SOURCE variable like $(FOO_SITE)/$(FOO_SOURCE), the resulting URI
has a double slash. While double-slashes are fine in unix paths, they
are reserved in URIs - the part following '//' must be an authority.
Signed-off-by: Shawn J. Goff <shawn7400@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The Ne10 project has been set up to provide a set of common, useful
functions which have been heavily optimized for the ARM Architecture
and provide consistent well tested behavior that can be easily
incorporated into applications. C interfaces to the functions are
provided for both assembler and NEON implementations.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The LCRYPT variable is no longer used; use SULOGINLIBS instead.
Signed-off-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
and re-enable boost context library since its compilation with
uClibc is fixed. Disable new atomic library because it can not
compile with uClibc (fixed in upstream version).
Signed-off-by: Victor Hiairrassary <victor.hiairrassary.ml@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, the gdb site for AVR32 was adjusted only when GDB_VERSION
was not set, i.e only when the cross-gdb is *not* built. We should in
fact also set the site when the cross-gdb is built, so when
GDB_VERSION is defined through package/gdb/Config.in.host.
So, instead, we now have something like:
ifeq ($(GDB_VERSION),)
# we define here a default version that is used when the cross-gdb is
# not built and only the target gdb is selected.
endif
ifeq ($(GDB_VERSION),something-special)
GDB_SITE = some-special-site-for-some-special-gdb-version
endif
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 79828fc01d (toolchain-external:
update ARM Linaro toolchains) accidently broke the URL for the Linaro
2013.01 toolchain by replacing a .bz2 extension by .bz. This patch
fixes this problem.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
A quick test with a ~3.5MB ext4 filesystem shows that 1081 blocks isn't
enough:
tune2fs 1.42.7 (21-Jan-2013)
Please run e2fsck on the filesystem.
Creating journal inode:
Journal size too big for filesystem.
So bump it a bit. Overestimating the journal size is probably not really
a big deal for the kind of systems using ext3/4 anyway.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some bootloaders have a buggy ext2 support, and require ext2 rev1
instead of the traditional ext2 rev0 that genext2fs produces.
tune2fs accepts only one '-O list' at a time, so we need to construct
a list of -O options.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the host-e2fsprogs to tune2fs the generated rootfs.ext2 image,
and upgrade it to either one of ext2, ext3 or ext4.
Since calling tune2fs may require running e2fsck (tune2fs will warn
to do so when certain FS options are changed), we systematically call
e2fsck. This makes the code path simpler, and as a side-effect checks
that genext2fs did not generate garbage.
In turn, e2fsck will unconditionally add a UUID to the filesystem,
which is bad for reproducibility, so we call tune2fs again to remove
the UUID. This does not require checking the filesystem.
To ensure compatibility of Buildroot's .config, leave ext2 as the
default. Boards' .config can override this at will.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Arnout Vandecappelle <arnout@mind.be>
Cc: Peter Korsgaard <jacmet@uclibc.org>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also change upstream website and download URL and add new Canvas option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit c461e64201 bumped the linux 3.8.x
stable version from 3.8.5 to 3.8.6, but did so in only one of the two places
in which the version number is hard-coded in linux/Config.in
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The x86/x86-64 CodeSourcery toolchains use some weird locations for
the gdbserver binary:
$ find . -name 'gdbserver'
./i686-pc-linux-gnu/libc/atom/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/atom/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/bin/gdbserver
./i686-pc-linux-gnu/libc/core2/usr/lib64/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib/bin/gdbserver
./i686-pc-linux-gnu/libc/usr/lib64/bin/gdbserver
Notice that it's sometimes hidden in a usr/{lib,lib64}/bin
directory. This patch changes the gdbserver logic to also try in this
location.
Originally based on work done by Daniel Nilsson, visible at
http://patchwork.ozlabs.org/patch/155767/.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order for a Buildroot toolchain to be usable as an external
toolchain, we should copy the target gdbserver somewhere into
$(HOST_DIR). In order to match what Crosstool-NG does (and therefore
to match something the external toolchain logic already understands),
we install gdbserver in
$(HOST_DIR)/usr/<tuple>/debug-root/usr/bin/gdbserver.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When an external toolchain is used, and the user has chosen to copy
the external toolchain gdbserver to the target, then we should allow
the user to build a gdbserver and/or a cross-gdb: the ones of the
external toolchain should be used.
The reasoning is that one must use a gdbserver and cross-gdb of
identical versions to be sure that debugging will work properly.
Change suggested by Yann E. Morin.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit converts gdb to the package infrastructure, and therefore
moves it from toolchain/gdb to package/gdb.
The target package is now visible in "Package selection for the
target" => "Debugging, profiling and benchmark". The main option,
"gdb", forcefully selects the "gdbserver" sub-option by
default. Another sub-option, "full debugger" allows to install the
complete gdb on the target. When this option is enabled, then
"gdbserver" is no longer forcefully selected. This ensures that at
least gdbserver or the full debugger gets built/installed, so that the
package is not a no-op.
The host debugger is still enabled through a configuration option in
"Toolchain". It is now visible regardless of the toolchain type (it
used to be hidden for External Toolchains). The configuration options
relative to the host debugger are now in package/gdb/Config.in.host,
similar to how we have package/binutils/Config.in.host.
Since gdb is now a proper package, it is no longer allowed to 'select
BR2_PTHREADS_DEBUG' to ensure thread debugging is available when
needed. Instead, it now 'depends on
BR2_TOOLCHAIN_HAS_THREADS_DEBUG'. This option, in turn, is selected by
the different toolchain backends when appropriate. The
'BR2_TOOLCHAIN_HAS_THREADS_DEBUG_IF_NEEDED' option is removed, since
we no longer need to know when it is allowed to 'select
BR2_PTHREADS_DEBUG'. Also, the 'BR2_PTHREADS_DEBUG' option is moved to
appear right below the thread implementation selection (in the case of
the Buildroot toolchain backend).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order for qmake to generate correct moc command lines, we need to
make sure INCLUDEPATH contains $(STAGING_DIR)/usr/include. To do so,
we add a new line in our custom qmake.conf.
Also, in order to clearly identify the Buildroot specific variables
from the qmake standard variables, we prefix all the custom Buildroot
variables by BUILDROOT_ in qmake.conf.
This solves compilation issues of qt5svg such as "Undefined
interface", due to the fact that moc isn't passed a -I path pointing
to the main header directory.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a local build failure when testing other things.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of explicitly listing the sub-architectures or architectures
that are big-endian, use BR2_ENDIAN directly.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Builtin-video from NSC/AMD Geode x86 processors.
Fixes build failures on other architectures.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As noticed by Arnout, Qt4 and Qt5 cannot be installed together,
because for example the qt.conf installed by one version cannot be
understood by the qmake of another version. We therefore make them
mutually exclusive, which sounds reasonable for the embedded systems
targeted by Buildroot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Somehow the old setting wasn't dropped in 184850a42 (bump u-boot /
linux versions to current stable).
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
olddefconfig is a new target available in kconfig that allows to take
an old .config file, and update it to the latest version of the code,
without being asked for questions: it automatically assumes the
default value for options whose value was not defined.
It for example allows to take a minimal defconfig, copy it as .config,
and do 'make olddefconfig' to get the full .config.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Our kconfig code is updated to the version of kernel 3.9-rc2. No major
issues during the migration, except:
* Some conflicts when applying 03-change-config-option-prefix.patch
due to upstream kernel changes.
* The need of adding a new patch, 15-fix-qconf-moc-rule.patch, to fix
the make rule that generates the moc file for the Qt-based
interface.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v3 so kill dead code.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v4 so drop the generic asm option.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We no longer support ARM less than v4 so just kill dead code that we had
for those cases.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
* Add Faraday FA526/626 as suggested on bug #1291
Note however that these cores are v4 and NOT v4t.
* Make the sa110 & sa1110 cores -> strongarm since they're the same.
* Drop all of the ARM variants lower than v4 including generic, there's
no point in supporting obsolete targets.
* Fix uClibc USE_BX logic, it was always on, this would break the new
FA526/626 support and broke StrongARM since it's a v4 core.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
git.xilinx.com is no longer available (moved to github), and github
doesn't allow downloading the tarball blobs directly, so use a local
mirror on sources.buildroot.net instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
To match the logic we have for BR2_LINUX_KERNEL_PATCH. The user has
already specified a custom patch directory, so we don't need to be
so specific about the what file names we accept, and it becomes quite
cumbersome when a custom git version is used.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The 3.7.x series is EOLed upstream so match that marking it as
deprecated.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
As reported in bug #6164 when using busybox iproute2 openvpn can fail to
locate the 'ip' utility.
This was correct until busybox 1.21.0 was released since it changed the
location of /bin/ip to /sbin/ip (what iproute2 proper does).
So adjust the ip path accordingly.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Passing --with-file-converter=enscript isn't enough since the build
system will try the fallback options (a2ps, mpage, texttops) if it's not
found.
This has two bad effects: one of the tools leaking from the distribution
making foomatic-filters think everything will be the same on the target
(and failing when that's not the case), and failed builds when none is
found (enscript is installed in the target directory, the build system
doesn't look there).
So just avoid the test by stating explicitly where enscript will live in
the target. Fixes:
http://autobuild.buildroot.net/results/37ad3d2c5c35f00c644a2c572f1429bafa4b7cf4/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
linknx has support for SMTP via libesmtp, however there's no clean way
to specify where libesmtp-config lives.
So when libesmtp is built it finds it via the headers and is
automatically enabled, but it fails to get the appropiate link line from
libesmtp-config because it's not found.
Fix it by forcibly disabling it. If someone is interested in working
with upstream about this an option like --with-libcurl should be
implemented in configure.
Solves:
http://autobuild.buildroot.net/results/90ebb383d7a2d7bdf09ffac65e2504da7b6d19f5/
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The need can be patched out by disabling the tests, however the only
package that uses libpthsem (bcusdk) needs a fork-enabled libpthsem so
there's not much point. Fixes:
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Fixes a build failure i've found while debugging another one :)
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that zeromq has been bumped to version 3.2.2, we need to provide the
C++ binding using a separate package. The zmqpp package provides a
high-level C++ wrapper library around the zeromq C API.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Now that zeromq has been bumped to version 3.2.2, we need to provide the
C++ binding using a separate package. The cppzmq package provides a simple
single-header C++ binding.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
[yann.morin.1998@free.fr: add comment about no license file]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Simon Dawson <spdawson@gmail.com>
[yann.morin.1998@free.fr: create dir as post-patch, not pre-configure]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: Jerzy Grzegorek <jerzy.grzegorek@trzebnica.net>
[yann.morin.1998@free.fr: space-damage]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Gutenprint, formerly named Gimp-Print, is a suite of printer
drivers that may be used with most common UNIX print spooling
systems, including CUPS, lpr, LPRng, or others
[Peter: needs host-pkgconf]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[yann.morin.1998@free.fr: needs libiconv, cleanup]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Foomatic is a database-driven system for integrating free software
printer drivers with common spoolers under Unix. It supports CUPS,
LPRng, LPD, GNUlpr, Solaris LP, PPR, PDQ, CPS, and direct printing
with every free software printer driver known to us and every
printer known to work with these drivers.
[Peter: minor whitespace fixes]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[yann.morin.1998@free.fr: space-damage, licensing terms, unneeded vars]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
GNU Enscript is a free replacement for Adobe's enscript program.
GNU Enscript converts ASCII files to PostScript, HTML, or RTF and
stores generated output to a file or sends it directly to the
printer. It includes features for `pretty-printing' (language-
sensitive code highlighting) in several programming languages.
[Peter: fix Config.in indentation]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
[yann.morin.1998@free.fr: space-damage, unneeded variables, licensing terms]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is a default configuration for the RaspberryPi, tested and functional.
The kernel used is the one developped by the RaspberryPi foundation as
it's not fully supported currently in mainline kernel. The configuration
used for the kernel is the default bcmrpi.
For more info, please find board/raspberrypi/readme.txt
[Peter: minor README tweaks, rename to readme.txt]
Signed-off-by: Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
[yann.morin.1998@free.fr: use correct kernel headers, update kernel cset]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Reviewed-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
We already use the .root stamp file to remember if we have copied the
skeleton, so we can remove the /bin check.
Likewise, we should always have a TARGET_SKELETON (or explicitly error
out otherwise), so remove that check as well.
Finally, now that we're using rsync to do the copy, we might as well
use its exclude support instead of cleaning up unwanted files afterwards.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
An example is .init_enable_core, to enable coredumps in busybox
Signed-off-by: Tilman Keskinöz <arved@arved.at>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Vala generates C code from Vala code, and therefore requires a
compiler. Since we are deprecating the native compiler support on the
target, having vala on the target doesn't make sense.
Of course, we keep vala for the host, where compilation happens.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The redis-001-uclibc.patch was properly adding conditionals to ensure
HAVE_BACKTRACE is not defined when uClibc is used. However, __unix
doesn't seem to be define with the toolchain Peter uses on gcc14, so
the <features.h> doesn't get included, therefore __UCLIBC isn't
defined, and the code believes that backtrace support is available. We
fix this by including <features.h> when __linux__ is defined.
Fixes:
http://autobuild.buildroot.org/results/4ba818f877af145a547a1fede0bb738192c2f181/build-end.log.
Also add another patch that do not redefine the _LARGEFILE_SOURCE and
_FILE_OFFSET_BITS macros if they are already defined on the command
line. It avoids the ugly warnings that we could see from the build
logs, and therefore make it easier to spot real errors.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
With 4.8.x released, it makes sense to update our default gcc version
before 4.6.x becomes unmaintained.
At the same time simplify the kconfig logic a bit.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
openswan needs host-bison. The dependency was already there, but the
build was not executed with $(TARGET_MAKE_ENV) in the environment, and
therefore $(HOST_DIR)/usr/bin was not in the PATH.
While we're at it, add licensing informations to openswan.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Make the MIB modules, which are included/excluded in the build, to be
configurable instead of being hard coded.
[Peter: drop menuconfig]
Signed-off-by: przemyslaw <przemyslaw.wrzos@calyptech.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The makeinfo program from texinfo is needed to get Crosstool-NG to
build properly a toolchain. Long term, it would be great if
Crosstool-NG supported building without texinfo, simply by disabling
the build of documentation.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some ltmain.sh files enclose the version number in quotes. This is
already handled corretly by pkg-autotools.mk in LIBTOOL_PATCH_HOOK.
This patch adds the same fix for AUTORECONF_HOOK.
Signed-off-by: przemyslaw <przemyslaw.wrzos@calyptech.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
... while keeping compatibility with older ones.
Preventive fix to autobuild failures! ;-)
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit provides configuration options to automatically generate a
binary environment image for U-Boot.
Two options are available (and mandatory):
* the location of a text file describing U-Boot environment.
* the size of the environment.
[Peter: fix Config.in indentation + typo]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The tool mkenvimage generates a valid binary environment image from
a text file describing the key=value pairs of the environment.
This commit allows installation on target and host.
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit:
* Adds licensing informations.
* Uses the apr-1-config script instead of pointing apr-util to the
apr build directory.
* Ensures apu-1-config gets fixed properly using the
<pkg>_CONFIG_SCRIPTS mechanism.
* Ensures that libiconv gets built before apr-util if available, so
that character set conversion features of apr-util can be enabled.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit:
* Adds licensing informations
* Ensures the apr-1-config script gets fixed appropriately
* Remove the usr/build-1/ directory from the target, since it is only
used during the compilation of packages that rely on APR.
* Fix up a few paths in usr/build-1/ so that the compilation of
apr-util works properly on top of this apr package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This patch superseds http://patchwork.ozlabs.org/patch/150161/, but
does it in a different way. Since we don't have a way of selecting the
thread implementation for external toolchains, and it sounds a bit too
heavy to add new config options just for the sake of rt-tests, we
instead simply add some help text to the rt-tests package explaining
that NPTL thread implementation is needed.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the Qt5 version will be the same for all Qt5 modules, factor it
in qt5/qt5.mk as QT5_VERSION.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The ncurses build can become polluted by the user's TERMINFO
environment variable, causing the user's ~/.terminfo to be modified
and preventing the install from succeeding:
/bin/sh ./run_tic.sh
** Building terminfo database, please wait...
Running tic to install /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/emacs/24.0.97/etc/ ...
You may see messages regarding extended capabilities, e.g., AX.
These are extended terminal capabilities which are compiled
using
tic -x
If you have ncurses 4.2 applications, you should read the INSTALL
document, and install the terminfo without the -x option.
1562 entries written to /home/nathanl/.terminfo
** built new /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/emacs/24.0.97/etc/
installing std
installing stdcrt
installing vt100
installing vt300
make[2]: Leaving directory `/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/misc'
make[1]: Leaving directory `/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7'
for i in $(find /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/lib* -name "*.la"); do cp -f $i $i~; /usr/bin/sed -i -e "s:\(['= ]\)/usr:\\1/home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr:g" $i; done
>>> ncurses 5.7 Installing to target
mkdir -p /home/nathanl/devel/buildroot.git/output/target/usr/lib
cp -dpf /home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/lib/libncurses.so* /home/nathanl/devel/buildroot.git/output/target/usr/lib/
ln -snf /usr/share/terminfo /home/nathanl/devel/buildroot.git/output/target/usr/lib/terminfo
mkdir -p /home/nathanl/devel/buildroot.git/output/target/usr/share/terminfo/x
cp -dpf /home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/terminfo/x/xterm /home/nathanl/devel/buildroot.git/output/target/usr/share/terminfo/x
cp: cannot stat `/home/nathanl/devel/buildroot.git/output/host/usr/i686-unknown-linux-gnu/sysroot/usr/share/terminfo/x/xterm': No such file or directory
make: *** [/home/nathanl/devel/buildroot.git/output/build/ncurses-5.7/.stamp_target_installed] Error 1
So unexport TERMINFO in the top-level Makefile.
Signed-off-by: Nathan Lynch <ntl@pobox.com>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Switch ECHOs to SEDs to avoid issues with defines changing after
sysoptions.h was included - and it's cleaner.
Enable hmac-sha2-256 and hmac-sha2-512 support for the full featured.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Some packages are hosted on https:// servers, and wget only works on
these if the SSL certificates are installed. For example, downloading
the kernel sources from kernel.org requires those SSL certificates to
be installed.
[Peter: fix typo]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host-autoconf build process requires a full Perl installation, or
at least a Perl installation that has the Data::Dumper module
installed. On a basic Debian system, only 'perl-base' is installed,
but Data::Dumper is in the 'perl' package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The current dependencies code abort as soon as one program is
missing. It is quite annoying when multiple programs are
missing. Instead, bail out if needed after testing all programs.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
awk, bison, flex, makeinfo, gettext should be built as dependencies of
packages when needed. In practice, even the toolchain build doesn't
need any of these, and only a few packages do require them.
It is not needed to list gzip and bzip2 since they are already checked
through ${DL_TOOLS}: whenever a package needs gzip or bzip2 for its
extraction, the dependency is added.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libglib2 requires msgfmt, which is now provided by host-gettext since
gettext will no longer be part of the mandatory dependencies.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the removal of gettext as a hard dependency, we
need to be able to provide a host variant of gettext for the few
packages that require msgfmt.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On the host, we generally build and install a shared library rather
than a static version of libraries. In this specific case, we will
want to build host-gettext, which builds a shared library that depends
on ncurses. And this doesn't work well if ncurses is static because it
hasn't been built with -fPIC. Therefore, let's build ncurses as shared
on the host.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
iproute2 requires bison, so we add the necessary dependency. In
addition, in order for iproute2 to find bison, we need to pass
$(TARGET_MAKE_ENV).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In preparation for the removal of the flex/bison mandatory
dependencies, make sure libpcap builds host-flex/host-bison.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
On a system where m4 is not installed, gmp does not build due to the
lack of m4. Add the missing host-m4 dependency.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a missing $(Q) in front of a MESSAGE call, which leads to the
message being displayed but also the command that shows the message.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
For each version of gcc, we need to check whether it requires mpc as a
dependency. Since this is true for 4.5, 4.6, 4.7, snapshots and now
4.8, let's factorize this code a bit by using a Kconfig symbol that
tells us whether we are using a gcc version that requires mpc.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This commit adds support for the recently released gcc 4.8. We re-add
the same patch series as the one used for 4.7.x, after refreshing the
patches.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The gcc snapshots are now located at
ftp://gcc.gnu.org/pub/gcc/snapshots/. This has been tested with a
recent 4.8.0-RC snapshot.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The libgtk2 package was using a host-<foo>.patch that should be
applied only on the host variant of the package. Unfortunately, with
the patch model rework, this doesn't work anymore: Buildroot tries to
apply the patch twice, for some reason.
But instead of fixing the patch model, it is probably a lot better to
fix this patch itself, which is the only usage of host-only patch in
Buildroot.
So instead of simply removing code that detects dependencies in gtk2's
configure.in script, we use a condition based on the value of
gdktarget. And it turns out that it makes the patch shorter.
However, it requires autoreconfiguring the libgtk2 target package,
because we are now modifying its configure.in.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The oprofile build was broken on powerpc since version 0.9.8.
This was detected in several autobuilds, like
http://autobuild.buildroot.net/results/6f6c02d18495907d50fcdfc6003ac20d493c55fe/
Thomas Petazzoni had some fixes pending in his own tree, and this patch is
partially based on this work (credits to him). Here is an overview:
- I took over (and fixed) the oprofile.mk changes, except for the powerpc-
specific part. For powerpc, there is a new dependency to libpfm4.
- I reimported those Yocto patches that were specific to the ppc build
issues, but left out the other ones. Those can be added in separate
commits.
[Peter: simplify libpfm4 check]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
At the Buildroot Developers Meeting (4-5 February 2013, in Brussels) a change
to the patch logic was discussed. See
http://elinux.org/Buildroot:DeveloperDaysFOSDEM2013
for details. In summary:
* For patches stored in the package directory, if
package/<pkg>/<version>/ does exist, apply package/<pkg>/<version>/*.patch,
otherwise, apply package/<pkg>/*.patch
* For patches stored in the global patches directory, if
$(GLOBAL_PATCH_DIR)/<pkg>/<version>/ does exist, apply
$(GLOBAL_PATCH_DIR)/<pkg>/<version>/*.patch, otherwise, apply
$(GLOBAL_PATCH_DIR)/<pkg>/*.patch
This patch adds the new BR2_GLOBAL_PATCH_DIR configuration item, and reworks
the generic package infrastructure to implement the new patch logic.
[Peter: fixup doc nits as pointed out by Thomas]
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Tested-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When the rpi-userland package is selected, assume we are targetting
the Raspberry Pi, and add the right platform glue code when building
the Qt5 EGLFS plugin.
Signed-off-by: Floris Bos <bos@je-eigen-domein.nl>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Version 2.0.4 has improved support for handling of device-tree
blobs on the ARM platform.
Signed-off-by: Sven Neumann <s.neumann@raumfeld.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
They're not development tools, they're libraries, so place them under
libraries->other.
Also adjust gsl sort order.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
libcap can optionally link to libattr to support extra
file capabilities. Link to this library and pull it as
dependency if BR2_PACKAGE_ATTR is selected.
[Peter: use LIBCAP_ prefix on variable]
Signed-off-by: Markos Chandras <markos.chandras@imgtec.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
HPLIP (Hewlett-Packard Linux Imaging & Printing) is an HP-developed solution
for printing, scanning, and faxing with HP inkjet and laser based printers
in Linux.
[Peter: fix Config.in white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Previously, the crosstool-NG backend did depend on the top-level
Buildroot's .config to detect changes in the toolchain options,
using a tentatively-clever heuristic, which also included the full
Buildroot's version string to push down to set the components' versions
strings.
In doing so, any commit in the Buildroot tree would imply a complete
rebuild of the toolchain, even in the case the toolchain options did
not change, thus being a large annoyance (to say the least).
As Buildroot never guaranteed that toolchain options would be detected,
even less handled, and that the internal backend does neither detect nor
act on toolchain options changes, and delegate that to the user, there
is no point in individualising the crosstool-NG backend's behaviour.
This reasoning also applies to the depdency on the crosstool-NG's bundled
.config file, too.
So, just drop the not-so-clever heuristic, and just build the toolchain
once, leaving to the user the responsibility to explictly ask Buildroot
to rebuild the toolchain.
Reported-by: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: "Przemyslaw Wrzos" <przemyslaw.wrzos@calyptech.com>
Cc: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This fixes the following errors when building util-linux v2.22.2 for
the host in case the PAM headers are missing:
configure: error: login selected, but required PAM header file not available
configure: error: su selected, but required PAM header file not available
Signed-off-by: Christophe Vu-Brugier <cvubrugier@lacie.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
If you do a "make -s", you will notice that the UPDATE_CONFIG_HOOK message
has an extra space compared to other highlighted messages. For example:
>>> util-linux 2.20.1 Updating config.sub and config.guess
>>> util-linux 2.20.1 Patching libtool
>>> util-linux 2.20.1 Autoreconfiguring
A grep shows this is the only instance of the extra space. This patch
removes the extra space.
Signed-off-by: Danomi Manchego <danomimanchego123@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Acked-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The patches to oprofile 0.9.7 seem still relevant for 0.9.8, but for some
reason they were not upstepped.
[Peter: drop version number from patch filenames]
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
JSON-GLib is a library providing serialization and deserialization
support for the JavaScript Object Notation (JSON) format described by
RFC 4627.
https://live.gnome.org/JsonGlib/
[Peter: add license info, tweak help text]
Signed-off-by: Henrique Camargo <henrique@henriquecamargo.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Little CMS intends to be an OPEN SOURCE small-footprint color management
engine, with special focus on accuracy and performance.
[Peter: tweak help text, fix white space]
Signed-off-by: Olivier Schonken <olivier.schonken@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The zeromq package was recently bumped from version 2.2.0 to version 3.2.2,
which has introduced a requirement for IPv6 support in the toolchain. At
present, IPv6 support is mandatory in zeromq: there is no configuration option
to enable/disable the feature.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Use the <pkg>_CONFIG_SCRIPTS mechanism to handle the sdl-config
script, so that it properly gets removed from the target. However, we
can't completely remove the manual fixup, because it also takes care
of removing the -Wl,-rpath option, which the general
<pkg>_CONFIG_SCRIPTS doesn't do.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
urg installs two <foo>-config scripts, so the ones installed in
$(STAGING_DIR) should be fixed up, and the ones installed in
$(TARGET_DIR) should be removed. Use the <pkg>_CONFIG_SCRIPTS
infrastructure to do this.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The urg.mk file mentions a LGPLv3+ license. However, none of the
source code in the urg package carries a copyright notice that
indicates the "v3 or later". The only license information we have is
the COPYING file, that contains the text of the LGPLv3
license. Therefore, we should probably assume that the code is under
LGPLv3 only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Google's framework for writing C++ tests on a variety of platforms (Linux,
Mac OS X, Windows, Cygwin, Windows CE, and Symbian). Based on the xUnit
architecture. Supports automatic test discovery, a rich set of assertions,
user-defined assertions, death tests, fatal and non-fatal failures, value-
and type-parameterized tests, various options for running the tests, and XML
test report generation.
Gtest also allows to easily build testsuites for C programs.
This package allows running testsuites on the target which might be
advantgeous in certain cases.
http://code.google.com/p/googletest/
[Peter: Tweak Config.in, use GTEST_VERSION in _SOURCE]
Signed-off-by: Stephan Hoffmann <sho@relinux.de>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This adds support for Pragmatic General Multicast protocol on raw
IP (PGM, RFC 3208) or UDP frames (EPGM) for use as zeromq reliable
multicast transport. The library relies on openpgm package to
implement the protocol itself.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
OpenPGM is an open source implementation of the Pragmatic General
Multicast (PGM) specification in RFC 3208 available at www.ietf.org.
It is required for PGM/EPGM support in ZeroMQ library.
Signed-off-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When using rsync to import package sources (typically with
PKG_OVERRIDE_SRCDIR), it often happens that these external sources
are under version control, and contain directories like .git,
.hg, etc.
Depending on the project, these directories can become pretty large
and typically have a lot of files. Moreover, they are not necessary
in the context of building the package. Therefore, this commit adds
the --cvs-exclude option to the rsync call, saving both disk space
and sync time.
Signed-off-by: Thomas De Schampheleire <thomas.de.schampheleire@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since ROOTFS_DEVICE_TABLES is a concatenation of two strings separated by
spaces, there will always be a space in it, which means it's never empty.
Therefore, when testing for empty, the condition never evaluate to false.
The following change fixes this problem; it runs qstrip on the overall
combination of the variables, causing the space to be removed if it's the
only thing left.
Tested-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Thomas De Schampheleire <patrickdepinguin+buildroot@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
AT91Bootstrap 1.x seems to have disappeared from atmel.com (but return
HTML instead of a 404), so use the at91.com FTP server instead.
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the time zone database, used by glibc for translations between
UTC and local time.
Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: use global ZIC, install posix TZ only once]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Cc: Danomi Manchego <danomimanchego123@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the zone information compiler, used to compile the time zone
database.
Signed-off-by: Richard Braun <rbraun@sceen.net>
[yann.morin.1998@free.fr: export ZIC for all to use]
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The host build of icu doesn't need to build everything, so we can add
a few more --disable-<foo> options to save a little bit of build time.
On a fast build server, this bring the host icu build from 2m28.517s
to 2m5.192s.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When passed --enable-static and --enable-shared, icu will generate
both a shared and a static version of its libraries.
However, in order to do so, it builds each and every object file
twice: once with -fPIC (for the shared library), and once without
-fPIC (for the static library). While admittedly building -fPIC for a
static library generates a slightly suboptimal code, this is what all
the autotools-based project are doing. They build each object file
once, and they use it for both the static and shared libraries.
icu builds the object files for the shared library as .o files, and
the object files for static library as .ao files. By simply changing
the suffix of object files used for static libraries to ".o", we tell
icu to use the ones built for the shared library (i.e, with -fPIC),
and avoid the double build of icu.
On a fast build server, this brings the target icu build from
3m41.302s down to 1m43.926s (approximate numbers: some other builds
are running on the system at the same time).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Many of ARM Sourcery CodeBench toolchain have a bug when compiling
icu's translit.cpp source file. The bug is trigerred when there is a
combination of "-W -Wall" and "-Os", and causes an internal compiler
error. The bug has been reported to Mentor Graphics.
Even though it is clearly a toolchain bug, having a workaround for it
is trivial in this case. So it will avoid our users falling into this
internal compiler error, and allow our autobuilders to test more
packages using this Sourcery CodeBench toolchain.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Flot plugin for computing bottoms for filled line and bar charts.
[Peter: fixup help text]
Signed-off-by: Arnaud Rébillout <rebillout@syscom.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is the beginning of the Qt5 packaging. This commit allows to
build only the qtbase module, which contains QtCore, QtNetwork, QtXml,
QtTest, QtSql and QtConcurrent.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In addition to the command-line tool gdisk and the interactive tool
sgdisk, gptfdisk also provides a ncurses based tool, cgdisk. This
commit adds support for building and installing this tool.
[Peter: Update gdisk autoselection logic to consider cgdisk as well]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Instead of always disabling the UTF16 support, make it
configurable. When ICU is available, enable UTF16 support, otherwise
disable it.
[Peter: wrap long line]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The installation step was not giving the full destination path even
though it was using -D, and it was forgetting to explicitly specify
the permissions of the file to install. This commit fixes both of
these minor issues.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
$(TARGET_CONFIGURE_OPTS) should be passed as $(MAKE) argument, not in
the environment. We can then remove the redefined CC and LD variables
that were useless. We also take this opportunity to pass
$(TARGET_MAKE_ENV) in the environment of make.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, selecting just the gptfdisk package wouldn't do anything.
It wouldn't build anything at all, and wouldn't install anything.
This is rather odd.
So now, we ensure that at least one of the two tools that gptfdisk can
build and install is selected. This allows use to factorize a bit the
select of util-linux in Config.in, and remove the if condition in the
makefile that was preventing the package from being built if no tools
was selected.
[Peter: Reword commit text]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
In order to match the new upstream name, rename the gdisk package to
gptfdisk. We add the relevant legacy configuration options to ensure a
smooth transition for users.
[Peter: fixup Config.in indentation]
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
jpeg is a virtual package, but since it is listed in the dependencies
of other packages, it should obey to all the normal make rules for
packages. Notably, the jpeg-show-depends target is mandatory for the
graph-depends script to work.
Instead to implement such a make target manually, make jpeg a normal
generic-package, except that it doesn't have any source.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Before creating a real virtual package named 'jpeg', we want to ensure
that no package is using the host variant of the virtual
package. Instead, we make them use directly the host-libjpeg package.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump to latest 2.22.2 version and revamp available options.
* Remove the assumed enable/disable defaults since these seem to change
quite often, so do what's wise and always enable/disable things.
* Switch from build "X" menu options to just X, add some help and sort.
* Introduce new option to install binaries (or not) to reduce bloat for
packages that just need libblkid and/or libuuid.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Obvious fix to the startup script: 'restart' is 'stop+start',
not 'stop+stop'.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Bump ser2net to version 2.8.
Exclude for nommu (uses fork).
Version 2.7 also did, guess the autobuilders never caught it.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
By default, glib builds its own internal copy of the pcre library, but
it also allows to use the one available from the system. Use this
possibility when pcre is already selected in the Buildroot
configuration.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Add a patch that provides an additional --disable-tests option to the
configure script.
Disabling the build of tests has two benefits:
* Prevents the build of a lot of code that doesn't build on noMMU
platforms.
* Reduces the build time.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
aircrack-ng uses fork() and therefore fails to build on non-MMU
systems:
aircrack-ng.o: In function `_clean_exit':
aircrack-ng.c:(.text+0x555c): undefined reference to `_fork'
collect2: ld returned 1 exit status
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Commit 7154798a46 (pcre: add support for 16 bits and 32 bits
variants), added in preparation to the introduction of the Qt5
packages, could break other packages that use pcre.
Even though by default the pcre 8 bits library is selected if no other
variant is selected, a randpackageconfig, or an user, could
potentially enable the 16 bits variant even if a package requires the
8 bits variant.
This has caused a number of build breakage on packages like ngrep,
cegui, nmap and others in the autobuilders.
In older to solve this, we simply unconditionally build the 8-bits
variant. Since each variant is only ~90k in size, it's probably not
worth the effort giving the possibility of building the 16 bits
variant only.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The xcb-util lacks a dependency on libxcb. Without this dependency, it
fails to build with:
checking for XCB... no
configure: error: in `/home/thomas/projets/buildroot/output/build/xcb-util-0.3.9':
configure: error: The pkg-config script could not be found or is too old. Make sure it
is in your PATH or set the PKG_CONFIG environment variable to the full
path to pkg-config.
Alternatively, you may set the environment variables XCB_CFLAGS
and XCB_LIBS to avoid the need to call pkg-config.
See the pkg-config man page for more details.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When building autoconf for the target, we already passed EMACS="no" to
prevent autoconf from building Emacs mode files. But we weren't doing
that when building autoconf for the host. This causes problems when
'emacs' is not really emacs, but a sort of clone like Jove. So we also
pass EMACS="no" when building host-autoconf to avoid autoconf
./configure script from detecting emacs and then use it to build .elc
files from .el source code.
Reported-by: Spielmann Werner <Werner.Spielmann@swarovski.com>
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Those acceleration libraries typically have multiple implementations:
some are free (Mesa), some are proprietary (generally SoC specific).
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Until now, we have been building only the 8bits PCRE variant. However,
Qt5 requires the 16bits variant. This commit therefore adds support to
build the 16bits and 32bits variants of PCRE. In order to preserve
backward compatibility, the 8bits variant is automatically chosen if
no specific variant is defined.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Since the introduction of the post-image mechanism, the graph-depends
script is broken: it tries to call 'make
target-post-image-show-depends', which doesn't exist since
'target-post-image' is not a package.
So we should simply ignore this 'target-post-image'.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Libtasn1 is the ASN.1 library used by GnuTLS, GNU Shishi and some
other packages. It was written by Fabio Fiorina, and has been
shipped as part of GnuTLS for some time but is now a proper
GNU package.
[Peter: Both licenses are '+']
Signed-off-by: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Aircrack-ng is a set of tools for auditing wireless security.
[Peter: mention that iw is a runtime dependency, use MAKE1]
Signed-off-by: Laurent Cans <laurent.cans@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Disable C++ and Ada bindings in host-ncurses, since those are not
needed. Save 9 seconds of build time on my laptop.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The installation of manpages during the installation step of
host-ncurses and ncurses is horribly slow, and useless. This commit
therefore disables the installation of those manpages, using the
--without-manpages configuration option.
It brings the combined host-ncurses+ncurses configure/build/install
time from 3 minutes and 18 seconds to 1 minute and 36 seconds.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Stress is linked statically if the --enable-static is specified.
However, this option is always specified in the global
SHARED_STATIC_LIBS_OPTS to tell packages to build static libraries,
if supported.
If the BR2_PREFER_STATIC_LIB is not defined, we have to specify
--disable-static explicitly to get stress linked dynamically.
Signed-off-by: Tzu-Jung Lee <tjlee@ambarella.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Version 3.8 of gpsd has been released, which includes some patches sent
upstream by Thomas Petazzoni. This patch bumps the gpsd package version,
and removes the upstreamed patches.
Signed-off-by: Simon Dawson <spdawson@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: Reword, add SV4_DEPRECATED, move to help text]
Signed-off-by: Samuel Martin <s.martin49@gmail.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
[Peter: update comment dependency, use DOSFSTOOLS_LDFLAGS for all flags]
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Problematic configurations not bumped:
arm-versatilepb - IRQ failure for symbios scsi
sh4-r2d - Qemu still doesn't emulate advanced features from the UART
sparc-ss10 - Illegal instruction
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Also mark 3.6.x as deprecated to match upstream EOL.
Signed-off-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
When selecting the Qt declarative module, all the QML imports was
built and installed to staging, but never installed to the target.
Signed-off-by: Daniel Nyström <daniel.nystrom@timeterminal.se>
Acked-by: Alexander Lukichev <alexander.lukichev@gmail.com>
Acked-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Tested-by: Arnout Vandecappelle (Essensium/Mind) <arnout@mind.be>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The mii-diag buildsystem doesn't correctly encode the needed
dependencies, so the install step can race against the mii-diag-udeb
(through all) to either cause mii-diag to be built for the host or
not be available when 'install' is executed.
Work around it by explicitly calling the needed steps and not building
the (unused) udeb version at all.
Fixes http://autobuild.buildroot.net/results/4825d267025c74c522077f84330b47f1110315fa
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
This is only the bare minimum needed to build the textual tshark utility.
Support for more options, including the wireshark GUI, can be added later.
[Peter: point includedir at staging to workaround host/target headers issue]
Cc: Stefan Fröberg <stefan.froberg@petroprogram.com>
Signed-off-by: Baruch Siach <baruch@tkos.co.il>
Acked-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Tested-by: Gustavo Zacarias <gustavo@zacarias.com.ar>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
this patch bumps json-c to version 0.10 and adapts the no-reentrant patch
to the new version.
Signed-off-by: Andreas Wetzel <andreas.wetzel@nanotronic.ch>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The existing Microblaze toolchains that we have have the annoying
property of being based on a very old glibc version: 2.3.6. Xilinx
provides newer toolchains with glibc 2.14, generated by Crosstool-NG,
but they are only available as part of a huge Git repository that
contains the gcc, Linux, binutils, glibc sources unpacked (4.4 GB
total), which makes is very unpractical.
I contacted the Xilinx person who did those toolchains, but they
apparently didn't intend to change that anytime soon.
So, we have created a tarball for those toolchains, adding a
README.txt file in the tarball that points back to the original
location that contains the source code for them. Those tarballs are
hosted on sources.buildroot.net.
This commit then adds support for those two new external toolchains,
one for little endian Microblaze, another one for big endian
Microblaze.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
Against all odds, vtun had a new release sometime last year.
Still, the code needs patching:
- the existing patch to fix installation has been refreshed
- the existing patch to fix blowfish header location has been
replaced (see below)
- configure looks in hard-coded, host paths (eg. /usr/include)
without any consideration for scross-compilation
--> new patch
- configure.in does not even pass an autoreconf without a
bit of love first (it's written in an ancient dialect that
autoreconf does no longer recognise)
--> new patch
Remove obsolete, unused, bit-rotting scripts and warning.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
The dependency on zlib is correctly expresed in vtun.mk,
but was missing from the Config.in.
Signed-off-by: "Yann E. MORIN" <yann.morin.1998@free.fr>
Signed-off-by: Peter Korsgaard <jacmet@sunsite.dk>
# Lock down headers to avoid breaking with new defaults
BR2_KERNEL_HEADERS_VERSION=y
BR2_DEFAULT_KERNEL_VERSION="2.6.35"
# Kernel
BR2_LINUX_KERNEL=y
BR2_LINUX_KERNEL_2_6_35=
BR2_LINUX_KERNEL_USE_DEFCONFIG=y
BR2_LINUX_KERNEL_CUSTOM_VERSION=y
BR2_LINUX_KERNEL_CUSTOM_VERSION_VALUE="2.6.35"
BR2_LINUX_KERNEL_DEFCONFIG="integrator"
# Filesystem
Some files were not shown because too many files have changed in this diff
Show More
Reference in New Issue
Block a user
Blocking a user prevents them from interacting with repositories, such as opening or commenting on pull requests or issues. Learn more about blocking a user.
