Update for 2019.08.1

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>
package/mongodb: security bump to version 4.0.12
2026-01-10 10:10:28 +03:00 · 2019-10-03 09:12:47 +02:00 · 2019-10-02 21:31:46 +02:00 · 2019-10-02 18:02:39 +02:00 · 2019-10-02 17:58:46 +02:00 · 2019-10-02 17:48:53 +02:00
5826 changed files with 56174 additions and 70053 deletions
--- a/.gitlab-ci.yml
+++ b/.gitlab-ci.yml
@@ -4,7 +4,7 @@
 # It needs to be regenerated every time a defconfig is added, using
 # "make .gitlab-ci.yml".

-image: buildroot/base:20191027.2027
+image: buildroot/base:20180318.1724

 .check_base:
    except:
@@ -54,12 +54,6 @@ check-package:
                tail -200 build.log
                exit 1
            }
-        - |
-            ./support/scripts/boot-qemu-image.py "${DEFCONFIG_NAME}" > >(tee runtime-test.log) 2>&1 || {
-                echo 'Failed runtime test last output'
-                tail -200 runtime-test.log
-                exit 1
-            }
    artifacts:
        when: always
        expire_in: 2 weeks
@@ -70,7 +64,6 @@ check-package:
            - output/build/build-time.log
            - output/build/packages-file-list.txt
            - output/build/*/.config
-            - runtime-test.log

 .defconfig:
    extends: .defconfig_base
@@ -167,8 +160,6 @@ bananapro_defconfig: { extends: .defconfig }
 beagleboardx15_defconfig: { extends: .defconfig }
 beaglebone_defconfig: { extends: .defconfig }
 beaglebone_qt5_defconfig: { extends: .defconfig }
-beagleboneai_defconfig: { extends: .defconfig }
-beelink_gs1_defconfig: { extends: .defconfig }
 chromebook_snow_defconfig: { extends: .defconfig }
 ci20_defconfig: { extends: .defconfig }
 csky_gx6605s_defconfig: { extends: .defconfig }
@@ -184,19 +175,15 @@ freescale_imx6dlsabresd_defconfig: { extends: .defconfig }
 freescale_imx6qsabreauto_defconfig: { extends: .defconfig }
 freescale_imx6qsabresd_defconfig: { extends: .defconfig }
 freescale_imx6sxsabresd_defconfig: { extends: .defconfig }
-freescale_imx6ullevk_defconfig: { extends: .defconfig }
 freescale_imx7dsabresd_defconfig: { extends: .defconfig }
 freescale_imx8mmevk_defconfig: { extends: .defconfig }
-freescale_imx8mnevk_defconfig: { extends: .defconfig }
 freescale_imx8mqevk_defconfig: { extends: .defconfig }
-freescale_imx8qmmek_defconfig: { extends: .defconfig }
 freescale_imx8qxpmek_defconfig: { extends: .defconfig }
 freescale_p1025twr_defconfig: { extends: .defconfig }
 freescale_t1040d4rdb_defconfig: { extends: .defconfig }
 freescale_t2080_qds_rdb_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_a64_defconfig: { extends: .defconfig }
 friendlyarm_nanopi_neo2_defconfig: { extends: .defconfig }
-friendlyarm_nanopi_neo_plus2_defconfig: { extends: .defconfig }
 galileo_defconfig: { extends: .defconfig }
 grinn_chiliboard_defconfig: { extends: .defconfig }
 grinn_liteboard_defconfig: { extends: .defconfig }
@@ -213,7 +200,6 @@ imx7d-sdb_defconfig: { extends: .defconfig }
 imx7dpico_defconfig: { extends: .defconfig }
 imx8mmpico_defconfig: { extends: .defconfig }
 imx8mpico_defconfig: { extends: .defconfig }
-lafrite_defconfig: { extends: .defconfig }
 lego_ev3_defconfig: { extends: .defconfig }
 licheepi_zero_defconfig: { extends: .defconfig }
 linksprite_pcduino_defconfig: { extends: .defconfig }
@@ -227,16 +213,12 @@ mx6sx_udoo_neo_defconfig: { extends: .defconfig }
 mx6udoo_defconfig: { extends: .defconfig }
 nanopi_m1_defconfig: { extends: .defconfig }
 nanopi_m1_plus_defconfig: { extends: .defconfig }
-nanopi_neo4_defconfig: { extends: .defconfig }
 nanopi_neo_defconfig: { extends: .defconfig }
-nanopi_r1_defconfig: { extends: .defconfig }
 nexbox_a95x_defconfig: { extends: .defconfig }
 nitrogen6sx_defconfig: { extends: .defconfig }
 nitrogen6x_defconfig: { extends: .defconfig }
 nitrogen7_defconfig: { extends: .defconfig }
 nitrogen8m_defconfig: { extends: .defconfig }
-nitrogen8mm_defconfig: { extends: .defconfig }
-nitrogen8mn_defconfig: { extends: .defconfig }
 odroidxu4_defconfig: { extends: .defconfig }
 olimex_a10_olinuxino_lime_defconfig: { extends: .defconfig }
 olimex_a13_olinuxino_defconfig: { extends: .defconfig }
@@ -246,8 +228,6 @@ olimex_a20_olinuxino_micro_defconfig: { extends: .defconfig }
 olimex_a33_olinuxino_defconfig: { extends: .defconfig }
 olimex_a64_olinuxino_defconfig: { extends: .defconfig }
 olimex_imx233_olinuxino_defconfig: { extends: .defconfig }
-olpc_xo175_defconfig: { extends: .defconfig }
-olpc_xo1_defconfig: { extends: .defconfig }
 openblocks_a6_defconfig: { extends: .defconfig }
 orangepi_lite2_defconfig: { extends: .defconfig }
 orangepi_lite_defconfig: { extends: .defconfig }
@@ -271,7 +251,6 @@ qemu_aarch64_virt_defconfig: { extends: .defconfig }
 qemu_arm_versatile_defconfig: { extends: .defconfig }
 qemu_arm_versatile_nommu_defconfig: { extends: .defconfig }
 qemu_arm_vexpress_defconfig: { extends: .defconfig }
-qemu_arm_vexpress_tz_defconfig: { extends: .defconfig }
 qemu_csky610_virt_defconfig: { extends: .defconfig }
 qemu_csky807_virt_defconfig: { extends: .defconfig }
 qemu_csky810_virt_defconfig: { extends: .defconfig }
@@ -313,11 +292,9 @@ raspberrypi2_defconfig: { extends: .defconfig }
 raspberrypi3_64_defconfig: { extends: .defconfig }
 raspberrypi3_defconfig: { extends: .defconfig }
 raspberrypi3_qt5we_defconfig: { extends: .defconfig }
-raspberrypi4_64_defconfig: { extends: .defconfig }
 raspberrypi4_defconfig: { extends: .defconfig }
 raspberrypi_defconfig: { extends: .defconfig }
 riotboard_defconfig: { extends: .defconfig }
-roc_pc_rk3399_defconfig: { extends: .defconfig }
 rock64_defconfig: { extends: .defconfig }
 roseapplepi_defconfig: { extends: .defconfig }
 s6lx9_microboard_defconfig: { extends: .defconfig }
@@ -331,11 +308,10 @@ snps_archs38_vdk_defconfig: { extends: .defconfig }
 socrates_cyclone5_defconfig: { extends: .defconfig }
 solidrun_clearfog_defconfig: { extends: .defconfig }
 solidrun_clearfog_gt_8k_defconfig: { extends: .defconfig }
-solidrun_macchiatobin_defconfig: { extends: .defconfig }
+solidrun_macchiatobin_mainline_defconfig: { extends: .defconfig }
+solidrun_macchiatobin_marvell_defconfig: { extends: .defconfig }
 stm32f429_disco_defconfig: { extends: .defconfig }
 stm32f469_disco_defconfig: { extends: .defconfig }
-stm32mp157a_dk1_defconfig: { extends: .defconfig }
-stm32mp157c_dk2_defconfig: { extends: .defconfig }
 toradex_apalis_imx6_defconfig: { extends: .defconfig }
 ts4900_defconfig: { extends: .defconfig }
 ts5500_defconfig: { extends: .defconfig }
@@ -344,17 +320,12 @@ wandboard_defconfig: { extends: .defconfig }
 warp7_defconfig: { extends: .defconfig }
 warpboard_defconfig: { extends: .defconfig }
 zynq_microzed_defconfig: { extends: .defconfig }
-zynq_qmtech_defconfig: { extends: .defconfig }
 zynq_zc706_defconfig: { extends: .defconfig }
 zynq_zed_defconfig: { extends: .defconfig }
 zynqmp_zcu106_defconfig: { extends: .defconfig }
 tests.boot.test_atf.TestATFAllwinner: { extends: .runtime_test }
 tests.boot.test_atf.TestATFMarvell: { extends: .runtime_test }
 tests.boot.test_atf.TestATFVexpress: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86EFI: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86LegacyBios: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86_64EFI: { extends: .runtime_test }
-tests.boot.test_syslinux.TestSysLinuxX86_64LegacyBios: { extends: .runtime_test }
 tests.core.test_file_capabilities.TestFileCapabilities: { extends: .runtime_test }
 tests.core.test_hardening.TestFortifyConserv: { extends: .runtime_test }
 tests.core.test_hardening.TestFortifyNone: { extends: .runtime_test }
@@ -363,7 +334,6 @@ tests.core.test_hardening.TestRelroPartial: { extends: .runtime_test }
 tests.core.test_hardening.TestSspNone: { extends: .runtime_test }
 tests.core.test_hardening.TestSspStrong: { extends: .runtime_test }
 tests.core.test_post_scripts.TestPostScripts: { extends: .runtime_test }
-tests.core.test_root_password.TestRootPassword: { extends: .runtime_test }
 tests.core.test_rootfs_overlay.TestRootfsOverlay: { extends: .runtime_test }
 tests.core.test_timezone.TestGlibcAllTimezone: { extends: .runtime_test }
 tests.core.test_timezone.TestGlibcNonDefaultLimitedTimezone: { extends: .runtime_test }
@@ -390,8 +360,6 @@ tests.init.test_busybox.TestInitSystemBusyboxRoNet: { extends: .runtime_test }
 tests.init.test_busybox.TestInitSystemBusyboxRw: { extends: .runtime_test }
 tests.init.test_busybox.TestInitSystemBusyboxRwNet: { extends: .runtime_test }
 tests.init.test_none.TestInitSystemNone: { extends: .runtime_test }
-tests.init.test_openrc.TestInitSystemOpenrcRoFull: { extends: .runtime_test }
-tests.init.test_openrc.TestInitSystemOpenrcRwFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoIfupdown: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRoNetworkd: { extends: .runtime_test }
@@ -399,33 +367,20 @@ tests.init.test_systemd.TestInitSystemSystemdRwFull: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRwIfupdown: { extends: .runtime_test }
 tests.init.test_systemd.TestInitSystemSystemdRwNetworkd: { extends: .runtime_test }
 tests.package.test_atop.TestAtop: { extends: .runtime_test }
-tests.package.test_crudini.TestCrudiniPy2: { extends: .runtime_test }
-tests.package.test_crudini.TestCrudiniPy3: { extends: .runtime_test }
 tests.package.test_docker_compose.TestDockerCompose: { extends: .runtime_test }
 tests.package.test_dropbear.TestDropbear: { extends: .runtime_test }
 tests.package.test_glxinfo.TestGlxinfo: { extends: .runtime_test }
-tests.package.test_gst1_python.TestGst1Python: { extends: .runtime_test }
 tests.package.test_ipython.TestIPythonPy3: { extends: .runtime_test }
-tests.package.test_libftdi1.TestPythonPy2Libftdi1: { extends: .runtime_test }
-tests.package.test_libftdi1.TestPythonPy3Libftdi1: { extends: .runtime_test }
 tests.package.test_lpeg.TestLuaLPeg: { extends: .runtime_test }
 tests.package.test_lpeg.TestLuajitLPeg: { extends: .runtime_test }
 tests.package.test_lsqlite3.TestLuaLsqlite3: { extends: .runtime_test }
 tests.package.test_lsqlite3.TestLuajitLsqlite3: { extends: .runtime_test }
 tests.package.test_lua.TestLua: { extends: .runtime_test }
 tests.package.test_lua.TestLuajit: { extends: .runtime_test }
-tests.package.test_lua_cqueues.TestLuaLuaCqueues: { extends: .runtime_test }
-tests.package.test_lua_cqueues.TestLuajitLuaCqueues: { extends: .runtime_test }
 tests.package.test_lua_curl.TestLuaLuacURL: { extends: .runtime_test }
 tests.package.test_lua_curl.TestLuajitLuacURL: { extends: .runtime_test }
-tests.package.test_lua_gd.TestLuaLuaGD: { extends: .runtime_test }
-tests.package.test_lua_gd.TestLuajitLuaGD: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuaHttp: { extends: .runtime_test }
 tests.package.test_lua_http.TestLuajitHttp: { extends: .runtime_test }
-tests.package.test_lua_lyaml.TestLuaLuaLyaml: { extends: .runtime_test }
-tests.package.test_lua_lyaml.TestLuajitLuaLyaml: { extends: .runtime_test }
-tests.package.test_lua_sdl2.TestLuaLuaSDL2: { extends: .runtime_test }
-tests.package.test_lua_sdl2.TestLuajitLuaSDL2: { extends: .runtime_test }
 tests.package.test_lua_utf8.TestLuaUtf8: { extends: .runtime_test }
 tests.package.test_lua_utf8.TestLuajitUtf8: { extends: .runtime_test }
 tests.package.test_luaexpat.TestLuaLuaExpat: { extends: .runtime_test }
@@ -442,22 +397,15 @@ tests.package.test_luasocket.TestLuaLuaSocket: { extends: .runtime_test }
 tests.package.test_luasocket.TestLuajitLuaSocket: { extends: .runtime_test }
 tests.package.test_luasyslog.TestLuaLuasyslog: { extends: .runtime_test }
 tests.package.test_luasyslog.TestLuajitLuasyslog: { extends: .runtime_test }
-tests.package.test_luvi.TestLuvi: { extends: .runtime_test }
-tests.package.test_lxc.TestLxc: { extends: .runtime_test }
-tests.package.test_lzlib.TestLuaLzlib: { extends: .runtime_test }
-tests.package.test_netdata.TestNetdata: { extends: .runtime_test }
 tests.package.test_openjdk.TestOpenJdk: { extends: .runtime_test }
-tests.package.test_opkg.TestOpkg: { extends: .runtime_test }
 tests.package.test_perl.TestPerl: { extends: .runtime_test }
 tests.package.test_perl_class_load.TestPerlClassLoad: { extends: .runtime_test }
 tests.package.test_perl_dbd_mysql.TestPerlDBDmysql: { extends: .runtime_test }
 tests.package.test_perl_encode_detect.TestPerlEncodeDetect: { extends: .runtime_test }
 tests.package.test_perl_gdgraph.TestPerlGDGraph: { extends: .runtime_test }
-tests.package.test_perl_html_parser.TestPerlHTMLParser: { extends: .runtime_test }
 tests.package.test_perl_io_socket_multicast.TestPerlIOSocketMulticast: { extends: .runtime_test }
 tests.package.test_perl_io_socket_ssl.TestPerlIOSocketSSL: { extends: .runtime_test }
 tests.package.test_perl_libwww_perl.TestPerllibwwwperl: { extends: .runtime_test }
-tests.package.test_perl_lwp_protocol_https.TestPerlLWPProtocolhttps: { extends: .runtime_test }
 tests.package.test_perl_mail_dkim.TestPerlMailDKIM: { extends: .runtime_test }
 tests.package.test_perl_x10.TestPerlX10: { extends: .runtime_test }
 tests.package.test_perl_xml_libxml.TestPerlXMLLibXML: { extends: .runtime_test }
@@ -469,14 +417,12 @@ tests.package.test_python_argh.TestPythonPy2Argh: { extends: .runtime_test }
 tests.package.test_python_argh.TestPythonPy3Argh: { extends: .runtime_test }
 tests.package.test_python_attrs.TestPythonPy2Attrs: { extends: .runtime_test }
 tests.package.test_python_attrs.TestPythonPy3Attrs: { extends: .runtime_test }
+tests.package.test_python_autobahn.TestPythonPy2Autobahn: { extends: .runtime_test }
 tests.package.test_python_autobahn.TestPythonPy3Autobahn: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy2Automat: { extends: .runtime_test }
 tests.package.test_python_automat.TestPythonPy3Automat: { extends: .runtime_test }
-tests.package.test_python_avro.TestPythonAvro: { extends: .runtime_test }
 tests.package.test_python_bitstring.TestPythonPy2Bitstring: { extends: .runtime_test }
 tests.package.test_python_bitstring.TestPythonPy3Bitstring: { extends: .runtime_test }
-tests.package.test_python_can.TestPythonPy2Can: { extends: .runtime_test }
-tests.package.test_python_can.TestPythonPy3Can: { extends: .runtime_test }
 tests.package.test_python_cbor.TestPythonPy2Cbor: { extends: .runtime_test }
 tests.package.test_python_cbor.TestPythonPy3Cbor: { extends: .runtime_test }
 tests.package.test_python_click.TestPythonPy2Click: { extends: .runtime_test }
@@ -486,10 +432,6 @@ tests.package.test_python_constantly.TestPythonPy3Constantly: { extends: .runtim
 tests.package.test_python_crossbar.TestPythonPy3Crossbar: { extends: .runtime_test }
 tests.package.test_python_cryptography.TestPythonPy2Cryptography: { extends: .runtime_test }
 tests.package.test_python_cryptography.TestPythonPy3Cryptography: { extends: .runtime_test }
-tests.package.test_python_django.TestPythonPy3Django: { extends: .runtime_test }
-tests.package.test_python_gitdb2.TestPythonPy2Gitdb2: { extends: .runtime_test }
-tests.package.test_python_gitdb2.TestPythonPy3Gitdb2: { extends: .runtime_test }
-tests.package.test_python_gobject.TestPythonPy3Gobject: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy2Incremental: { extends: .runtime_test }
 tests.package.test_python_incremental.TestPythonPy3Incremental: { extends: .runtime_test }
 tests.package.test_python_passlib.TestPythonPy2Passlib: { extends: .runtime_test }
@@ -502,26 +444,22 @@ tests.package.test_python_pyyaml.TestPythonPy2Pyyaml: { extends: .runtime_test }
 tests.package.test_python_pyyaml.TestPythonPy3Pyyaml: { extends: .runtime_test }
 tests.package.test_python_service_identity.TestPythonPy2ServiceIdentity: { extends: .runtime_test }
 tests.package.test_python_service_identity.TestPythonPy3ServiceIdentity: { extends: .runtime_test }
-tests.package.test_python_smmap2.TestPythonPy2Smmap2: { extends: .runtime_test }
-tests.package.test_python_smmap2.TestPythonPy3Smmap2: { extends: .runtime_test }
 tests.package.test_python_subprocess32.TestPythonPy2Subprocess32: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy2Treq: { extends: .runtime_test }
 tests.package.test_python_treq.TestPythonPy3Treq: { extends: .runtime_test }
 tests.package.test_python_twisted.TestPythonPy2Twisted: { extends: .runtime_test }
 tests.package.test_python_twisted.TestPythonPy3Twisted: { extends: .runtime_test }
+tests.package.test_python_txaio.TestPythonPy2Txaio: { extends: .runtime_test }
 tests.package.test_python_txaio.TestPythonPy3Txaio: { extends: .runtime_test }
 tests.package.test_python_txtorcon.TestPythonPy2Txtorcon: { extends: .runtime_test }
 tests.package.test_python_txtorcon.TestPythonPy3Txtorcon: { extends: .runtime_test }
 tests.package.test_python_ubjson.TestPythonPy2Ubjson: { extends: .runtime_test }
 tests.package.test_python_ubjson.TestPythonPy3Ubjson: { extends: .runtime_test }
-tests.package.test_redis.TestRedis: { extends: .runtime_test }
 tests.package.test_rings.TestLuaRings: { extends: .runtime_test }
 tests.package.test_rings.TestLuajitRings: { extends: .runtime_test }
 tests.package.test_rust.TestRust: { extends: .runtime_test }
 tests.package.test_rust.TestRustBin: { extends: .runtime_test }
 tests.package.test_syslog_ng.TestSyslogNg: { extends: .runtime_test }
-tests.package.test_tmux.TestTmux: { extends: .runtime_test }
-tests.package.test_turbolua.TestLuajitTurbolua: { extends: .runtime_test }
 tests.toolchain.test_external.TestExternalToolchainBuildrootMusl: { extends: .runtime_test }
 tests.toolchain.test_external.TestExternalToolchainBuildrootuClibc: { extends: .runtime_test }
 tests.toolchain.test_external.TestExternalToolchainCCache: { extends: .runtime_test }
--- a/.gitlab-ci.yml.in
+++ b/.gitlab-ci.yml.in
@@ -4,7 +4,7 @@
 # It needs to be regenerated every time a defconfig is added, using
 # "make .gitlab-ci.yml".

-image: buildroot/base:20191027.2027
+image: buildroot/base:20180318.1724

 .check_base:
    except:
@@ -54,12 +54,6 @@ check-package:
                tail -200 build.log
                exit 1
            }
-        - |
-            ./support/scripts/boot-qemu-image.py "${DEFCONFIG_NAME}" > >(tee runtime-test.log) 2>&1 || {
-                echo 'Failed runtime test last output'
-                tail -200 runtime-test.log
-                exit 1
-            }
    artifacts:
        when: always
        expire_in: 2 weeks
@@ -70,7 +64,6 @@ check-package:
            - output/build/build-time.log
            - output/build/packages-file-list.txt
            - output/build/*/.config
-            - runtime-test.log

 .defconfig:
    extends: .defconfig_base
--- a/1095
+++ b/1095
--- a/Config.in
+++ b/Config.in
@@ -26,9 +26,29 @@ config BR2_HOST_GCC_VERSION
 	string
 	option env="HOST_GCC_VERSION"

+config BR2_HOST_GCC_AT_LEAST_4_5
+	bool
+	default y if BR2_HOST_GCC_VERSION = "4 5"
+
+config BR2_HOST_GCC_AT_LEAST_4_6
+	bool
+	default y if BR2_HOST_GCC_VERSION = "4 6"
+	select BR2_HOST_GCC_AT_LEAST_4_5
+
+config BR2_HOST_GCC_AT_LEAST_4_7
+	bool
+	default y if BR2_HOST_GCC_VERSION = "4 7"
+	select BR2_HOST_GCC_AT_LEAST_4_6
+
+config BR2_HOST_GCC_AT_LEAST_4_8
+	bool
+	default y if BR2_HOST_GCC_VERSION = "4 8"
+	select BR2_HOST_GCC_AT_LEAST_4_7
+
 config BR2_HOST_GCC_AT_LEAST_4_9
 	bool
 	default y if BR2_HOST_GCC_VERSION = "4 9"
+	select BR2_HOST_GCC_AT_LEAST_4_8

 config BR2_HOST_GCC_AT_LEAST_5
 	bool
@@ -50,11 +70,6 @@ config BR2_HOST_GCC_AT_LEAST_8
 	default y if BR2_HOST_GCC_VERSION = "8"
 	select BR2_HOST_GCC_AT_LEAST_7

-config BR2_HOST_GCC_AT_LEAST_9
-	bool
-	default y if BR2_HOST_GCC_VERSION = "9"
-	select BR2_HOST_GCC_AT_LEAST_8
-
 # When adding new entries above, be sure to update
 # the HOSTCC_MAX_VERSION variable in the Makefile.

@@ -63,6 +78,16 @@ config BR2_HOST_GCC_AT_LEAST_9
 config BR2_NEEDS_HOST_JAVA
 	bool

+# Hidden boolean selected by packages in need of javac in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAVAC
+	bool
+
+# Hidden boolean selected by packages in need of jar in order to build
+# (example: classpath)
+config BR2_NEEDS_HOST_JAR
+	bool
+
 # Hidden boolean selected by pre-built packages for x86, when they
 # need to run on x86-64 machines (example: pre-built external
 # toolchains, binary tools like SAM-BA, etc.).
@@ -531,6 +556,7 @@ endchoice
 config BR2_GOOGLE_BREAKPAD_ENABLE
 	bool "Enable google-breakpad support"
 	depends on BR2_INSTALL_LIBSTDCPP
+	depends on BR2_HOST_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_TOOLCHAIN_GCC_AT_LEAST_4_8 # C++11
 	depends on BR2_USE_WCHAR
 	depends on BR2_TOOLCHAIN_HAS_THREADS
@@ -685,24 +711,6 @@ config BR2_REPRODUCIBLE
 	  This is labeled as an experimental feature, as not all
 	  packages behave properly to ensure reproducibility.

-config BR2_PER_PACKAGE_DIRECTORIES
-	bool "Use per-package directories (experimental)"
-	help
-	  This option will change the build process of Buildroot
-	  package to use per-package target and host directories.
-
-	  This is useful for two related purposes:
-
-	    - Cleanly isolate the build of each package, so that a
-	      given package only "sees" the dependencies it has
-	      explicitly expressed, and not other packages that may
-	      have by chance been built before.
-
-	    - Enable top-level parallel build.
-
-	  This is labeled as an experimental feature, as not all
-	  packages behave properly with per-package directories.
-
 endmenu

 comment "Security Hardening Options"
@@ -710,15 +718,10 @@ comment "Security Hardening Options"
 config BR2_PIC_PIE
 	bool "Build code with PIC/PIE"
 	depends on BR2_SHARED_LIBS
-	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	help
 	  Generate Position-Independent Code (PIC) and link
 	  Position-Independent Executables (PIE).

-comment "PIC/PIE needs a toolchain w/ PIE"
-	depends on BR2_SHARED_LIBS
-	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
-
 choice
 	bool "Stack Smashing Protection"
 	default BR2_SSP_ALL if BR2_ENABLE_SSP # legacy
@@ -753,7 +756,6 @@ config BR2_SSP_REGULAR

 config BR2_SSP_STRONG
 	bool "-fstack-protector-strong"
-	depends on BR2_TOOLCHAIN_HAS_SSP_STRONG
 	help
 	  Like -fstack-protector but includes additional functions to be
 	  protected - those that have local array definitions, or have
@@ -802,16 +804,12 @@ config BR2_RELRO_PARTIAL

 config BR2_RELRO_FULL
 	bool "Full"
-	depends on BR2_TOOLCHAIN_SUPPORTS_PIE
 	select BR2_PIC_PIE
 	help
 	  This option includes the partial configuration, but also marks
 	  the GOT as read-only at the cost of initialization time during
 	  program loading, i.e every time an executable is started.

-comment "RELRO Full needs a toolchain w/ PIE"
-	depends on !BR2_TOOLCHAIN_SUPPORTS_PIE
-
 endchoice

 comment "RELocation Read Only (RELRO) needs shared libraries"
--- a/Config.in.legacy
+++ b/Config.in.legacy
@@ -144,465 +144,6 @@ endif

 ###############################################################################

-comment "Legacy options removed in 2020.08"
-
-config BR2_PACKAGE_KODI_PERIPHERAL_STEAMCONTROLLER
-	bool "kodi-peripheral-steamcontroller package was removed"
-	select BR2_LEGACY
-	help
-	  This package is broken.
-
-comment "Legacy options removed in 2020.05"
-
-config BR2_PACKAGE_WIRINGPI
-	bool "wiringpi package removed"
-	select BR2_LEGACY
-	help
-	  The author of wiringpi has deprecated the package, and
-	  completely removed the git tree that was serving the
-	  sources, with this message:
-	  Please look for alternatives for wiringPi
-
-config BR2_PACKAGE_PYTHON_PYCRYPTO
-	bool "python-pycrypto package removed"
-	select BR2_LEGACY
-	help
-	  This package has been removed, use python-pycryptodomex
-	  instead.
-
-config BR2_PACKAGE_MTDEV2TUIO
-	bool "mtdev2tuio package removed"
-	select BR2_LEGACY
-	help
-	  The mtdev2tuio package was removed as it breaks the builds
-	  every now and then and is not maintained upstream.
-
-config BR2_PACKAGE_EZXML
-	bool "ezxml package removed"
-	select BR2_LEGACY
-	help
-	  The ezXML package was removed as it is affected by several
-	  CVEs and is not maintained anymore (no release since 2006).
-
-config BR2_PACKAGE_COLLECTD_LVM
-	bool "lvm support in collectd was removed"
-	select BR2_LEGACY
-	help
-	  collectd removed LVM plugin, liblvm2app has been deprecated
-
-config BR2_PACKAGE_PYTHON_PYASN
-	bool "duplicate python-pyasn1 package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_PYASN1
-	help
-	  This package was a duplicate of python-pyasn1.
-
-config BR2_PACKAGE_PYTHON_PYASN_MODULES
-	bool "duplicate python-pyasn1-modules package removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_PYASN1_MODULES
-	help
-	  This package was a duplicate of python-pyasn1-modules.
-
-config BR2_PACKAGE_LINUX_FIRMWARE_ATHEROS_10K_QCA6174
-	bool "duplicate QCA6174 firmware symbol removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_LINUX_FIRMWARE_QUALCOMM_6174
-	help
-	  This config symbol duplicates existing symbol for QCA6174
-	  firmware.
-
-config BR2_PACKAGE_QT5CANVAS3D
-	bool "qt5canvas3d was removed"
-	select BR2_LEGACY
-	help
-	  This Qt5 module was removed by the upstream Qt project since
-	  Qt 5.13, so the corresponding Buildroot package was removed
-	  as well.
-
-config BR2_PACKAGE_KODI_LIBTHEORA
-	bool "libtheora support in Kodi was removed"
-	select BR2_LEGACY
-	help
-	  Kodi does not need libtheora
-
-config BR2_PACKAGE_CEGUI06
-	bool "BR2_PACKAGE_CEGUI06 was renamed"
-	select BR2_PACKAGE_CEGUI
-	select BR2_LEGACY
-	help
-	  The BR2_PACKAGE_CEGUI06 config symbol was renamed to
-	  BR2_PACKAGE_CEGUI.
-
-config BR2_GCC_VERSION_5_X
-	bool "gcc 5.x support removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc version 5.x has been removed. The current
-	  default version (8.x or later) has been selected instead.
-
-comment "Legacy options removed in 2020.02"
-
-config BR2_PACKAGE_JAMVM
-	bool "jamvm removed"
-	select BR2_LEGACY
-	help
-	  JamVM has not had a release since 2014 and is unmaintained.
-
-config BR2_PACKAGE_CLASSPATH
-	bool "classpath removed"
-	select BR2_LEGACY
-	help
-	  GNU Classpath package was removed. The last upstream
-	  release was in 2012 and there hasn't been a commit
-	  since 2016.
-
-config BR2_PACKAGE_QT5_VERSION_5_6
-	bool "qt 5.6 support removed"
-	select BR2_LEGACY
-	help
-	  Support for Qt 5.6 is EOL and has been removed. The current
-	  version (5.12 or later) has been selected instead.
-
-config BR2_PACKAGE_CURL
-	bool "BR2_PACKAGE_CURL was renamed"
-	select BR2_PACKAGE_LIBCURL_CURL
-	select BR2_LEGACY
-	help
-	  The BR2_PACKAGE_CURL config symbol was renamed to
-	  BR2_PACKAGE_LIBCURL_CURL.
-
-config BR2_PACKAGE_GSTREAMER
-	bool "gstreamer-0.10 removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer-0.10 package was removed. It has been deprecated
-	  upstream since 2012, and is missing a lot of features and
-	  fixes compared to gstreamer-1.x.
-
-config BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_GSTREAMER_PLUGINS
-	bool "nvidia-tegra23 binaries gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in nvidia-tegra23 binaries.
-
-config BR2_PACKAGE_NVIDIA_TEGRA23_BINARIES_NV_SAMPLE_APPS
-	bool "nvidia-tegra23 binaries sample apps removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in nvidia-tegra23 binaries.
-
-config BR2_PACKAGE_FREERDP_GSTREAMER
-	bool "freerdp gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in freerdp.
-
-config BR2_PACKAGE_OPENCV3_WITH_GSTREAMER
-	bool "opencv3 gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in opencv3.
-
-config BR2_PACKAGE_OPENCV_WITH_GSTREAMER
-	bool "opencv gstreamer 0.10.x support removed"
-	select BR2_LEGACY
-	help
-	  Gstreamer 0.10.x is no longer available in Buildroot, so
-	  neither is the support in opencv.
-
-config BR2_PACKAGE_LIBPLAYER
-	bool "libplayer package was removed"
-	select BR2_LEGACY
-	help
-	  The libplayer package was removed. The latest release is
-	  from 2010 and none of the backends are available in
-	  Buildroot any more.
-
-config BR2_GCC_VERSION_OR1K
-	bool "gcc 5.x fork for or1k has been removed"
-	select BR2_LEGACY
-	help
-	  Support for gcc 5.x for or1k has been removed. The current
-	  default version (9.x or later) has been selected instead.
-
-config BR2_PACKAGE_BLUEZ_UTILS
-	bool "bluez-utils was removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_BLUEZ5_UTILS if BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_4 \
-		&& BR2_TOOLCHAIN_HAS_SYNC_4
-	help
-	  The bluez-utils (BlueZ 4.x) package was removed as it is
-	  deprecated since a long time. As an alternative, the
-	  bluez5-utils (BlueZ 5.x) has been automatically selected in
-	  your configuration.
-
-config BR2_PACKAGE_GADGETFS_TEST
-	bool "gadgetfs-test was removed"
-	select BR2_LEGACY
-	help
-	  The gadgetfs-test package was removed. Gadgetfs has been
-	  deprecated in favour of functionfs. Consider using
-	  gadget-tool (gt) instead.
-
-config BR2_PACKAGE_FIS
-	bool "fis was removed"
-	select BR2_LEGACY
-	help
-	  The fis package was removed.
-
-config BR2_PACKAGE_REFPOLICY_POLICY_VERSION
-	string "refpolicy policy version"
-	help
-	  The refpolicy policy version option has been moved to the
-	  libsepol package.
-
-config BR2_PACKAGE_REFPOLICY_POLICY_VERSION_WRAP
-	bool
-	default y if BR2_PACKAGE_REFPOLICY_POLICY_VERSION != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_CELT051
-	bool "celt051 package was removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_OPUS
-	help
-	  The celt051 package was removed as it is now obsolete since
-	  the CELT codec has been merged into the IETF Opus codec. As
-	  a result, the opus package has been automatically selected
-	  in your configuration.
-
-config BR2_PACKAGE_WIREGUARD
-	bool "wireguard package renamed"
-	depends on BR2_TOOLCHAIN_HEADERS_AT_LEAST_3_10
-	select BR2_LEGACY
-	select BR2_PACKAGE_WIREGUARD_LINUX_COMPAT if BR2_LINUX_KERNEL
-	select BR2_PACKAGE_WIREGUARD_TOOLS
-	help
-	  The wireguard package has been renamed to wireguard-tools
-	  for the userspace tooling and wireguard-linux-compat for the
-	  kernel side for legacy (<5.6) kernels to match upstream.
-
-config BR2_PACKAGE_PERL_NET_PING
-	bool "perl-net-ping was removed"
-	select BR2_LEGACY
-	help
-	  Net::Ping is a Perl core module (ie. bundled with perl).
-
-config BR2_PACKAGE_PERL_MIME_BASE64
-	bool "perl-mime-base64 was removed"
-	select BR2_LEGACY
-	help
-	  MIME::Base64 is a Perl core module (ie. bundled with perl).
-
-config BR2_PACKAGE_PERL_DIGEST_MD5
-	bool "perl-digest-md5 was removed"
-	select BR2_LEGACY
-	help
-	  Digest::MD5 is a Perl core module (ie. bundled with perl).
-
-config BR2_PACKAGE_ERLANG_P1_ICONV
-	bool "erlang-p1-iconv has been removed"
-	select BR2_LEGACY
-	help
-	  The erlang-p1-iconv package was no longer used by ejabberd,
-	  and was no longer maintained upstream, so it was removed.
-
-config BR2_KERNEL_HEADERS_5_3
-	bool "kernel headers version 5.3.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 5.3.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_PYTHON_SCAPY3K
-	bool "python-scapy3k is replaced by python-scapy"
-	select BR2_LEGACY
-	select BR2_PACKAGE_PYTHON_SCAPY
-	help
-	  python-scapy3k has been deprecated, since python-scapy has
-	  gained Python 3 support. Use BR2_PACKAGE_PYTHON_SCAPY
-	  instead.
-
-config BR2_BINUTILS_VERSION_2_30_X
-	bool "binutils version 2.30 support removed"
-	select BR2_LEGACY
-	help
-	  Support for binutils version 2.30 has been removed. The
-	  current default version (2.31 or later) has been selected
-	  instead.
-
-config BR2_PACKAGE_RPI_USERLAND_START_VCFILED
-	bool "rpi-userland start vcfiled was removed"
-	select BR2_LEGACY
-	help
-	  The vcfiled support was removed upstream.
-
-comment "Legacy options removed in 2019.11"
-
-config BR2_PACKAGE_OPENVMTOOLS_PROCPS
-	bool "openvmtools' procps support was removed"
-	select BR2_LEGACY
-	help
-	  Upstream stopped supporting this option a while ago.
-
-config BR2_PACKAGE_ALLJOYN
-	bool "alljoyn was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_PACKAGE_ALLJOYN_BASE
-	bool "alljoyn-base was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_PACKAGE_ALLJOYN_BASE_CONTROLPANEL
-	bool "alljoyn-base control panel was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_PACKAGE_ALLJOYN_BASE_NOTIFICATION
-	bool "alljoyn-base notification was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_PACKAGE_ALLJOYN_BASE_ONBOARDING
-	bool "alljoyn-base onboarding was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_PACKAGE_ALLJOYN_TCL_BASE
-	bool "alljoyn-tcl-base was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_PACKAGE_ALLJOYN_TCL
-	bool "alljoyn-tcl was removed"
-	select BR2_LEGACY
-	help
-	  The alljoyn framework is dead
-
-config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS
-	string "toolchain-external extra libs option has been renamed"
-	help
-	  The option BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS has
-	  been renamed to BR2_TOOLCHAIN_EXTRA_LIBS.
-
-config BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS_WRAP
-	bool
-	default y if BR2_TOOLCHAIN_EXTRA_EXTERNAL_LIBS != ""
-	select BR2_LEGACY
-
-config BR2_PACKAGE_PYTHON_PYSNMP_APPS
-	bool "python-pysnmp-apps was removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_SNMPCLITOOLS
-	help
-	  Following upstream changes, the python-pysnmp-apps package
-	  has been removed, and snmpclitools should be used as a
-	  replacement.
-
-config BR2_KERNEL_HEADERS_5_2
-	bool "kernel headers version 5.2.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 5.2.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_TARGET_RISCV_PK
-	bool "riscv-pk was removed"
-	select BR2_LEGACY
-	help
-	  The RISC-V Proxy Kernel (pk) and Berkley Boot Loader (BBL)
-	  have been replaced with OpenSBI.
-
-config BR2_PACKAGE_SQLITE_STAT3
-	bool "sqlite stat3 support was removed"
-	select BR2_LEGACY
-	help
-	  Upstream removed the support for stat3.
-
-config BR2_KERNEL_HEADERS_5_1
-	bool "kernel headers version 5.1.x are no longer supported"
-	select BR2_LEGACY
-	help
-	  Version 5.1.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed.
-
-config BR2_PACKAGE_DEVMEM2
-	bool "devmem2 package was removed"
-	select BR2_LEGACY
-	help
-	  Use the the Busybox devmem utility, instead, which provides
-	  the same functionality.
-
-config BR2_PACKAGE_USTR
-	bool "ustr package removed"
-	select BR2_LEGACY
-	help
-	  The 'ustr' package was only used by SELinux libsemanage, but
-	  since SELinux 2.7, ustr is no longer used. Therefore, we
-	  removed this package from Buildroot.
-
-config BR2_PACKAGE_KODI_SCREENSAVER_PLANESTATE
-	bool "kodi-screensaver-planestate package was removed"
-	select BR2_LEGACY
-	help
-	  This package is incompatible with Kodi 18.x.
-
-config BR2_PACKAGE_KODI_VISUALISATION_WAVEFORHUE
-	bool "kodi-visualisation-waveforhue package was removed"
-	select BR2_LEGACY
-	help
-	  This package is incompatible with Kodi 18.x.
-
-config BR2_PACKAGE_KODI_AUDIODECODER_OPUS
-	bool "kodi-audiodecoder-opus package was removed"
-	select BR2_LEGACY
-	help
-	  This package is incompatible with Kodi 18.x.
-
-config BR2_PACKAGE_MESA3D_OSMESA
-	bool "mesa OSMesa option renamed"
-	select BR2_PACKAGE_MESA3D_OSMESA_CLASSIC if BR2_PACKAGE_MESA3D_DRI_DRIVER_SWRAST
-	select BR2_LEGACY
-	help
-	  The option was renamed in order to match the naming used
-	  by the meson buildsystem.
-
-config BR2_PACKAGE_HOSTAPD_DRIVER_RTW
-	bool "hostapd rtl871xdrv driver removed"
-	select BR2_LEGACY
-	help
-	  Since the update of hostapd to 2.9, the patch provided for
-	  the rtl871xdrv no longer works, although it
-	  applies. Moreover, AP support for Realtek chips is broken
-	  anyway in kernels > 4.9. Therefore, this option has been
-	  removed.
-
-config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_NEW
-	bool "new dbus support option in wpa_supplicant was renamed"
-	select BR2_PACKAGE_WPA_SUPPLICANT_DBUS if BR2_TOOLCHAIN_HAS_THREADS
-	select BR2_LEGACY
-	help
-	  The new dbus support option was renamed.
-
-config BR2_PACKAGE_WPA_SUPPLICANT_DBUS_OLD
-	bool "old dbus support in wpa_supplicant was removed"
-	select BR2_LEGACY
-	help
-	  The old dbus support was removed.
-
 comment "Legacy options removed in 2019.08"

 config BR2_TARGET_TS4800_MBRBOOT
@@ -849,6 +390,12 @@ config BR2_PACKAGE_PYTHON_PYQT
 	  The python-pyqt package was removed. Consider python-pyqt5
 	  instead.

+config BR2_PACKAGE_GNURADIO_QTGUI
+	bool "gnuradio gr-qtgui option removed"
+	select BR2_LEGACY
+	help
+	  The gr-qtgui option was removed.
+
 config BR2_PACKAGE_LUACRYPTO
 	bool "luacrypto package removed"
 	select BR2_LEGACY
--- a/454
+++ b/454
--- a/95
+++ b/95
@@ -2,7 +2,7 @@
 #
 # Copyright (C) 1999-2005 by Erik Andersen <andersen@codepoet.org>
 # Copyright (C) 2006-2014 by the Buildroot developers <buildroot@uclibc.org>
-# Copyright (C) 2014-2020 by the Buildroot developers <buildroot@buildroot.org>
+# Copyright (C) 2014-2019 by the Buildroot developers <buildroot@buildroot.org>
 #
 # This program is free software; you can redistribute it and/or modify
 # it under the terms of the GNU General Public License as published by
@@ -92,9 +92,9 @@ all:
 .PHONY: all

 # Set and export the version string
-export BR2_VERSION := 2020.08-git
+export BR2_VERSION := 2019.08.1
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1591045000
+BR2_VERSION_EPOCH = 1570086600

 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -188,9 +188,6 @@ ifneq ($(BR2_EXTERNAL_ERROR),)
 $(error $(BR2_EXTERNAL_ERROR))
 endif

-# Workaround bug in make-4.3: https://savannah.gnu.org/bugs/?57676
-$(BASE_DIR)/.br2-external.mk:;
-
 # To make sure that the environment variable overrides the .config option,
 # set this before including .config.
 ifneq ($(BR2_DL_DIR),)
@@ -207,7 +204,6 @@ BR_GRAPH_OUT := $(or $(BR2_GRAPH_OUT),pdf)
 BUILD_DIR := $(BASE_DIR)/build
 BINARIES_DIR := $(BASE_DIR)/images
 BASE_TARGET_DIR := $(BASE_DIR)/target
-PER_PACKAGE_DIR := $(BASE_DIR)/per-package
 # initial definition so that 'make clean' works for most users, even without
 # .config. HOST_DIR will be overwritten later when .config is included.
 HOST_DIR := $(BASE_DIR)/host
@@ -230,12 +226,21 @@ ifeq ($(filter $(noconfig_targets),$(MAKECMDGOALS)),)
 -include $(BR2_CONFIG)
 endif

-ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),)
-# Disable top-level parallel build if per-package directories is not
-# used. Indeed, per-package directories is necessary to guarantee
-# determinism and reproducibility with top-level parallel build.
+# Parallel execution of this Makefile is disabled because it changes
+# the packages building order, that can be a problem for two reasons:
+# - If a package has an unspecified optional dependency and that
+#   dependency is present when the package is built, it is used,
+#   otherwise it isn't (but compilation happily proceeds) so the end
+#   result will differ if the order is swapped due to parallel
+#   building.
+# - Also changing the building order can be a problem if two packages
+#   manipulate the same file in the target directory.
+#
+# Taking into account the above considerations, if you still want to execute
+# this top-level Makefile in parallel comment the ".NOTPARALLEL" line and
+# use the -j<jobs> option when building, e.g:
+#      make -j$((`getconf _NPROCESSORS_ONLN`+1))
 .NOTPARALLEL:
-endif

 # timezone and locale may affect build output
 ifeq ($(BR2_REPRODUCIBLE),y)
@@ -343,7 +348,7 @@ export HOSTARCH := $(shell LC_ALL=C $(HOSTCC_NOCCACHE) -v 2>&1 | \

 # When adding a new host gcc version in Config.in,
 # update the HOSTCC_MAX_VERSION variable:
-HOSTCC_MAX_VERSION := 9
+HOSTCC_MAX_VERSION := 8

 HOSTCC_VERSION := $(shell V=$$($(HOSTCC_NOCCACHE) --version | \
 	sed -n -r 's/^.* ([0-9]*)\.([0-9]*)\.([0-9]*)[ ]*.*/\1 \2/p'); \
@@ -447,24 +452,19 @@ XZCAT := $(call qstrip,$(BR2_XZCAT))
 LZCAT := $(call qstrip,$(BR2_LZCAT))
 TAR_OPTIONS = $(call qstrip,$(BR2_TAR_OPTIONS)) -xf

-ifeq ($(BR2_PER_PACKAGE_DIRECTORIES),y)
-HOST_DIR = $(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/host,$(call qstrip,$(BR2_HOST_DIR)))
-TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(if $(PKG),$(PER_PACKAGE_DIR)/$($(PKG)_NAME)/target,$(BASE_TARGET_DIR)))
-else
+# packages compiled for the host go here
 HOST_DIR := $(call qstrip,$(BR2_HOST_DIR))
+
+# The target directory is common to all packages,
+# but there is one that is specific to each filesystem.
 TARGET_DIR = $(if $(ROOTFS),$(ROOTFS_$(ROOTFS)_TARGET_DIR),$(BASE_TARGET_DIR))
-endif

 ifneq ($(HOST_DIR),$(BASE_DIR)/host)
 HOST_DIR_SYMLINK = $(BASE_DIR)/host
 $(HOST_DIR_SYMLINK): $(BASE_DIR)
-	ln -snf $(HOST_DIR) $(HOST_DIR_SYMLINK)
+	ln -snf $(HOST_DIR) $(BASE_DIR)/host
 endif

-STAGING_DIR_SYMLINK = $(BASE_DIR)/staging
-$(STAGING_DIR_SYMLINK): $(BASE_DIR)
-	ln -snf $(STAGING_DIR) $(STAGING_DIR_SYMLINK)
-
 # Quotes are needed for spaces and all in the original PATH content.
 BR_PATH = "$(HOST_DIR)/bin:$(HOST_DIR)/sbin:$(PATH)"

@@ -593,8 +593,8 @@ world: target-post-image
 .PHONY: prepare-sdk
 prepare-sdk: world
 	@$(call MESSAGE,"Rendering the SDK relocatable")
-	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath host
-	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath staging
+	$(TOPDIR)/support/scripts/fix-rpath host
+	$(TOPDIR)/support/scripts/fix-rpath staging
 	$(INSTALL) -m 755 $(TOPDIR)/support/misc/relocate-sdk.sh $(HOST_DIR)/relocate-sdk.sh
 	mkdir -p $(HOST_DIR)/share/buildroot
 	echo $(HOST_DIR) > $(HOST_DIR)/share/buildroot/sdk-location
@@ -698,9 +698,8 @@ define PURGE_LOCALES
 	rm -f $(LOCALE_WHITELIST)
 	for i in $(LOCALE_NOPURGE) locale-archive; do echo $$i >> $(LOCALE_WHITELIST); done

-	for dir in $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale); \
+	for dir in $(wildcard $(addprefix $(TARGET_DIR),/usr/share/locale /usr/share/X11/locale /usr/lib/locale)); \
 	do \
-		if [ ! -d $$dir ]; then continue; fi; \
 		for langdir in $$dir/*; \
 		do \
 			if [ -e "$${langdir}" ]; \
@@ -728,30 +727,26 @@ $(TARGETS_ROOTFS): target-finalize
 # Avoid the rootfs name leaking down the dependency chain
 target-finalize: ROOTFS=

-TARGET_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list.txt))
-HOST_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-host.txt))
-STAGING_DIR_FILES_LISTS = $(sort $(wildcard $(BUILD_DIR)/*/.files-list-staging.txt))
-
-.PHONY: host-finalize
-host-finalize: $(PACKAGES) $(HOST_DIR) $(HOST_DIR_SYMLINK)
-	@$(call MESSAGE,"Finalizing host directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),host,$(HOST_DIR))
+host-finalize: $(HOST_DIR_SYMLINK)

 .PHONY: staging-finalize
-staging-finalize: $(STAGING_DIR_SYMLINK)
+staging-finalize:
+	@ln -snf $(STAGING_DIR) $(BASE_DIR)/staging

 .PHONY: target-finalize
-target-finalize: $(PACKAGES) $(TARGET_DIR) host-finalize
+target-finalize: $(PACKAGES) host-finalize
 	@$(call MESSAGE,"Finalizing target directory")
-	$(call per-package-rsync,$(sort $(PACKAGES)),target,$(TARGET_DIR))
+	# Check files that are touched by more than one package
+	./support/scripts/check-uniq-files -t target $(BUILD_DIR)/packages-file-list.txt
+	./support/scripts/check-uniq-files -t staging $(BUILD_DIR)/packages-file-list-staging.txt
+	./support/scripts/check-uniq-files -t host $(BUILD_DIR)/packages-file-list-host.txt
 	$(foreach hook,$(TARGET_FINALIZE_HOOKS),$($(hook))$(sep))
 	rm -rf $(TARGET_DIR)/usr/include $(TARGET_DIR)/usr/share/aclocal \
 		$(TARGET_DIR)/usr/lib/pkgconfig $(TARGET_DIR)/usr/share/pkgconfig \
-		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake \
-		$(TARGET_DIR)/usr/doc
+		$(TARGET_DIR)/usr/lib/cmake $(TARGET_DIR)/usr/share/cmake
 	find $(TARGET_DIR)/usr/{lib,share}/ -name '*.cmake' -print0 | xargs -0 rm -f
 	find $(TARGET_DIR)/lib/ $(TARGET_DIR)/usr/lib/ $(TARGET_DIR)/usr/libexec/ \
-		\( -name '*.a' -o -name '*.la' -o -name '*.prl' \) -print0 | xargs -0 rm -f
+		\( -name '*.a' -o -name '*.la' \) -print0 | xargs -0 rm -f
 ifneq ($(BR2_PACKAGE_GDB),y)
 	rm -rf $(TARGET_DIR)/usr/share/gdb
 endif
@@ -784,7 +779,7 @@ endif
 	ln -sf ../usr/lib/os-release $(TARGET_DIR)/etc

 	@$(call MESSAGE,"Sanitizing RPATH in target tree")
-	PER_PACKAGE_DIR=$(PER_PACKAGE_DIR) $(TOPDIR)/support/scripts/fix-rpath target
+	$(TOPDIR)/support/scripts/fix-rpath target

 # For a merged /usr, ensure that /lib, /bin and /sbin and their /usr
 # counterparts are appropriately setup as symlinks ones to the others.
@@ -806,13 +801,6 @@ endif # merged /usr
 		$(call MESSAGE,"Copying overlay $(d)"); \
 		$(call SYSTEM_RSYNC,$(d),$(TARGET_DIR))$(sep))

-	$(if $(TARGET_DIR_FILES_LISTS), \
-		cat $(TARGET_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list.txt
-	$(if $(HOST_DIR_FILES_LISTS), \
-		cat $(HOST_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-host.txt
-	$(if $(STAGING_DIR_FILES_LISTS), \
-		cat $(STAGING_DIR_FILES_LISTS)) > $(BUILD_DIR)/packages-file-list-staging.txt
-
 	@$(foreach s, $(call qstrip,$(BR2_ROOTFS_POST_BUILD_SCRIPT)), \
 		$(call MESSAGE,"Executing post-build script $(s)"); \
 		$(EXTRA_ENV) $(s) $(TARGET_DIR) $(call qstrip,$(BR2_ROOTFS_POST_SCRIPT_ARGS))$(sep))
@@ -904,8 +892,7 @@ graph-size:
 	$(Q)$(TOPDIR)/support/scripts/size-stats --builddir $(BASE_DIR) \
 		--graph $(GRAPHS_DIR)/graph-size.$(BR_GRAPH_OUT) \
 		--file-size-csv $(GRAPHS_DIR)/file-size-stats.csv \
-		--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv \
-		$(BR2_GRAPH_SIZE_OPTS)
+		--package-size-csv $(GRAPHS_DIR)/package-size-stats.csv

 .PHONY: check-dependencies
 check-dependencies:
@@ -1029,7 +1016,7 @@ savedefconfig: $(BUILD_DIR)/buildroot-config/conf outputmakefile

 # staging and target directories do NOT list these as
 # dependencies anywhere else
-$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST) $(PER_PACKAGE_DIR):
+$(BUILD_DIR) $(BASE_TARGET_DIR) $(HOST_DIR) $(BINARIES_DIR) $(LEGAL_INFO_DIR) $(REDIST_SOURCES_DIR_TARGET) $(REDIST_SOURCES_DIR_HOST):
 	@mkdir -p $@

 # outputmakefile generates a Makefile in the output directory, if using a
@@ -1061,7 +1048,7 @@ printvars:
 clean:
 	rm -rf $(BASE_TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) $(HOST_DIR_SYMLINK) \
 		$(BUILD_DIR) $(BASE_DIR)/staging \
-		$(LEGAL_INFO_DIR) $(GRAPHS_DIR) $(PER_PACKAGE_DIR)
+		$(LEGAL_INFO_DIR) $(GRAPHS_DIR)

 .PHONY: distclean
 distclean: clean
@@ -1190,7 +1177,7 @@ release: OUT = buildroot-$(BR2_VERSION)
 release:
 	git archive --format=tar --prefix=$(OUT)/ HEAD > $(OUT).tar
 	$(MAKE) O=$(OUT) manual-html manual-text manual-pdf
-	$(MAKE) O=$(OUT) distclean
+	$(MAKE) O=$(OUT) clean
 	tar rf $(OUT).tar $(OUT)
 	gzip -9 -c < $(OUT).tar > $(OUT).tar.gz
 	bzip2 -9 -c < $(OUT).tar > $(OUT).tar.bz2
--- a/arch/Config.in.arc
+++ b/arch/Config.in.arc
@@ -15,17 +15,11 @@ config BR2_archs38
 	bool "ARC HS38"
 	help
 	  Generic ARC HS capable of running Linux, i.e. with MMU,
-	  caches and 32-bit multiplier. Also it corresponds to the
-	  default configuration in older GNU toolchain versions.
+	  caches and multiplier. Also it corresponds to the default
+	  configuration in older GNU toolchain versions.

-config BR2_archs38_64mpy
-	bool "ARC HS38 with 64-bit mpy"
-	help
-	  Fully featured ARC HS capable of running Linux, i.e. with
-	  MMU, caches and 64-bit multiplier.
-
-	  If you're not sure which version of ARC HS core you build
-	  for use this one.
+	  If you're not sure which version of ARC HS core you  build for
+	  keep this one.

 config BR2_archs38_full
 	bool "ARC HS38 with Quad MAC & FPU"
@@ -49,7 +43,7 @@ endchoice
 # Choice of atomic instructions presence
 config BR2_ARC_ATOMIC_EXT
 	bool "Atomic extension (LLOCK/SCOND instructions)"
-	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	default y if BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 config BR2_ARCH
 	default "arc"	if BR2_arcle
@@ -67,13 +61,12 @@ config BR2_GCC_TARGET_CPU
 	default "arc700" if BR2_arc750d
 	default "arc700" if BR2_arc770d
 	default "archs"	 if BR2_archs38
-	default "hs38"	 if BR2_archs38_64mpy
 	default "hs38_linux"	 if BR2_archs38_full
 	default "hs4x_rel31"	 if BR2_archs4x_rel31

 config BR2_READELF_ARCH_NAME
 	default "ARCompact"	if BR2_arc750d || BR2_arc770d
-	default "ARCv2"		if BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	default "ARCv2"		if BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 choice
 	prompt "MMU Page Size"
@@ -93,7 +86,7 @@ choice

 config BR2_ARC_PAGE_SIZE_4K
 	bool "4KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 config BR2_ARC_PAGE_SIZE_8K
 	bool "8KB"
@@ -103,7 +96,7 @@ config BR2_ARC_PAGE_SIZE_8K

 config BR2_ARC_PAGE_SIZE_16K
 	bool "16KB"
-	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_64mpy || BR2_archs38_full || BR2_archs4x_rel31
+	depends on BR2_arc770d || BR2_archs38 || BR2_archs38_full || BR2_archs4x_rel31

 endchoice

--- a/arch/Config.in.riscv
+++ b/arch/Config.in.riscv
@@ -80,12 +80,8 @@ endchoice

 choice
 	prompt "Target ABI"
-	default BR2_RISCV_ABI_ILP32D if !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-	default BR2_RISCV_ABI_ILP32F if !BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-	default BR2_RISCV_ABI_ILP32  if !BR2_ARCH_IS_64
-	default BR2_RISCV_ABI_LP64D  if BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVD
-	default BR2_RISCV_ABI_LP64F  if BR2_ARCH_IS_64 && BR2_RISCV_ISA_RVF
-	default BR2_RISCV_ABI_LP64   if BR2_ARCH_IS_64
+	default BR2_RISCV_ABI_ILP32 if !BR2_ARCH_IS_64
+	default BR2_RISCV_ABI_LP64 if BR2_ARCH_IS_64

 config BR2_RISCV_ABI_ILP32
 	bool "ilp32"
--- a/arch/Config.in.x86
+++ b/arch/Config.in.x86
@@ -1,8 +1,6 @@
 # i386/x86_64 cpu features
 config BR2_X86_CPU_HAS_MMX
 	bool
-config BR2_X86_CPU_HAS_3DNOW
-	bool
 config BR2_X86_CPU_HAS_SSE
 	bool
 config BR2_X86_CPU_HAS_SSE2
@@ -157,18 +155,15 @@ config BR2_x86_k6_2
 	bool "k6-2"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_athlon
 	bool "athlon"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_athlon_4
 	bool "athlon-4"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
 	select BR2_X86_CPU_HAS_SSE
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_opteron
 	bool "opteron"
 	select BR2_X86_CPU_HAS_MMX
@@ -214,7 +209,6 @@ config BR2_x86_c3
 	bool "Via/Cyrix C3 (Samuel/Ezra cores)"
 	depends on !BR2_x86_64
 	select BR2_X86_CPU_HAS_MMX
-	select BR2_X86_CPU_HAS_3DNOW
 config BR2_x86_c32
 	bool "Via C3-2 (Nehemiah cores)"
 	depends on !BR2_x86_64
--- a/arch/arch.mk.arc
+++ b/arch/arch.mk.arc
@@ -1,17 +1,4 @@
-ifeq ($(BR2_arc),y)
-
 # -matomic is always required when the ARC core has the atomic extensions
-ifeq ($(BR2_ARC_ATOMIC_EXT),y)
+ifeq ($(BR2_arc)$(BR2_ARC_ATOMIC_EXT),yy)
 ARCH_TOOLCHAIN_WRAPPER_OPTS = -matomic
 endif
-
-# Explicitly set LD's "max-page-size" instead of relying on some defaults
-ifeq ($(BR2_ARC_PAGE_SIZE_4K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=4096
-else ifeq ($(BR2_ARC_PAGE_SIZE_8K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=8192
-else ifeq ($(BR2_ARC_PAGE_SIZE_16K),y)
-ARCH_TOOLCHAIN_WRAPPER_OPTS += -Wl,-z,max-page-size=16384
-endif
-
-endif
--- a/board/beagleboardx15/post-image.sh
+++ b/board/beagleboardx15/post-image.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/beaglebone/linux-4.1-sgx.fragment
+++ b/board/beaglebone/linux-4.1-sgx.fragment
@@ -10,4 +10,3 @@ CONFIG_DRM_OMAP_WB_M2M=y
 CONFIG_DRM_TILCDC=y
 CONFIG_DRM_I2C_NXP_TDA998X=y
 CONFIG_DRM=y
-CONFIG_DRM_LEGACY=y
--- a/board/beaglebone/post-build.sh
+++ b/board/beaglebone/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-cp $BOARD_DIR/uEnv.txt $BINARIES_DIR/uEnv.txt
--- a/board/beaglebone/post-image.sh
+++ b/board/beaglebone/post-image.sh
@@ -0,0 +1,29 @@
+#!/bin/sh
+# post-image.sh for CircuitCo BeagleBone and TI am335x-evm
+# 2014, Marcin Jabrzyk <marcin.jabrzyk@gmail.com>
+# 2016, Lothar Felten <lothar.felten@gmail.com>
+
+BOARD_DIR="$(dirname $0)"
+
+# copy the uEnv.txt to the output/images directory
+cp board/beaglebone/uEnv.txt $BINARIES_DIR/uEnv.txt
+
+# the 4.1 kernel does not provide a dtb for beaglebone green, so we
+# use a different genimage config if am335x-bonegreen.dtb is not
+# built:
+if [ -e ${BINARIES_DIR}/am335x-bonegreen.dtb ] ; then
+	GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+else
+	GENIMAGE_CFG="${BOARD_DIR}/genimage_linux41.cfg"
+fi
+
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/beaglebone/uEnv.txt
+++ b/board/beaglebone/uEnv.txt
@@ -3,9 +3,6 @@ devtype=mmc
 bootdir=
 bootfile=zImage
 bootpartition=mmcblk0p2
-console=ttyS0,115200n8
-loadaddr=0x82000000
-fdtaddr=0x88000000
 set_mmc1=if test $board_name = A33515BB; then setenv bootpartition mmcblk1p2; fi
-set_bootargs=setenv bootargs console=${console} root=/dev/${bootpartition} rw rootfstype=ext4 rootwait
+set_bootargs=setenv bootargs console=ttyO0,115200n8 root=/dev/${bootpartition} rw rootfstype=ext4 rootwait
 uenvcmd=run set_mmc1; run set_bootargs;run loadimage;run loadfdt;printenv bootargs;bootz ${loadaddr} - ${fdtaddr}
--- a/board/beagleboneai/patches/uboot/0001-BeagleBone-AI-support.patch
+++ b/board/beagleboneai/patches/uboot/0001-BeagleBone-AI-support.patch
--- a/board/beagleboneai/post-build.sh
+++ b/board/beagleboneai/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-cp board/beagleboneai/uEnv.txt $BINARIES_DIR/uEnv.txt
--- a/board/beagleboneai/readme.txt
+++ b/board/beagleboneai/readme.txt
@@ -1,28 +0,0 @@
-Intro
-=====
-
-This configuration will build a basic image for the BeagleBoard.org
-BeagleBone AI. For more details about the board, visit:
-
-https://beagleboard.org/ai
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make beagleboneai_defconfig
-
-Compile everything and build the USB flash drive image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
--- a/board/beagleboneai/uEnv.txt
+++ b/board/beagleboneai/uEnv.txt
@@ -1,6 +0,0 @@
-bootpart=0:1
-bootdir=/
-bootargs=console=ttyS0,115200n8 root=/dev/mmcblk0p2 ro rootwait
-devtype=mmc
-fdtfile=am5729-beagleboneai.dtb
-uenvcmd=run loadimage; run loadfdt; printenv bootargs; bootz ${loadaddr} - ${fdtaddr}
--- a/board/beelink/gs1/extlinux.conf
+++ b/board/beelink/gs1/extlinux.conf
@@ -1,4 +0,0 @@
-label linux
-  kernel /Image
-  devicetree /sun50i-h6-beelink-gs1.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
--- a/board/beelink/gs1/genimage.cfg
+++ b/board/beelink/gs1/genimage.cfg
@@ -1,33 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h6-beelink-gs1.dtb",
-			"extlinux"
-		}
-	}
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/beelink/gs1/post-build.sh
+++ b/board/beelink/gs1/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
--- a/board/boundarydevices/common/boot.cmd
+++ b/board/boundarydevices/common/boot.cmd
@@ -9,9 +9,9 @@ if itest.s x51 == "x${imx_cpu}" ; then
 	a_base=0x90000000
 elif itest.s x53 == "x${imx_cpu}"; then
 	a_base=0x70000000
-elif itest.s x6SX == "x${imx_cpu}" || itest.s x6ULL == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
+elif itest.s x6SX == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
 	a_base=0x80000000
-elif itest.s x8MQ == "x${imx_cpu}" || itest.s x8MM == "x${imx_cpu}" || itest.s x8MMQ == "x${imx_cpu}" || itest.s x8MNano == "x${imx_cpu}"; then
+elif itest.s x8MQ == "x${imx_cpu}"; then
 	a_base=0x40000000
 	kernelimage=Image
 	bootcommand=booti
@@ -43,18 +43,10 @@ if itest.s "x" == "x${fdt_file}" ; then
 		fdt_file=imx6qp-${board}.dtb;
 	elif itest.s x6SX == "x${imx_cpu}" ; then
 		fdt_file=imx6sx-${board}${m4}.dtb;
-	elif itest.s x6ULL == "x${imx_cpu}" ; then
-		fdt_file=imx6ull-${board}.dtb;
 	elif itest.s x7D == "x${imx_cpu}" ; then
 		fdt_file=imx7d-${board}${m4}.dtb;
 	elif itest.s x8MQ == "x${imx_cpu}" ; then
 		fdt_file=imx8mq-${board}${m4}.dtb;
-	elif itest.s x8MM == "x${imx_cpu}" ; then
-		fdt_file=imx8mm-${board}${m4}.dtb;
-	elif itest.s x8MMQ == "x${imx_cpu}" ; then
-		fdt_file=imx8mm-${board}${m4}.dtb;
-	elif itest.s x8MNano == "x${imx_cpu}" ; then
-		fdt_file=imx8mn-${board}${m4}.dtb;
 	elif itest.s x51 == "x${imx_cpu}" ; then
 		fdt_file=imx51-${board}.dtb;
 	elif itest.s x53 == "x${imx_cpu}" ; then
@@ -71,6 +63,7 @@ fi
 if load ${devtype} ${devnum}:${distro_bootpart} ${a_script} uEnv.txt ; then
    env import -t ${a_script} ${filesize}
 fi
+
 setenv bootargs ${bootargs} console=${console},115200 vmalloc=400M consoleblank=0 rootwait fixrtc cpu=${imx_cpu} board=${board}

 if load ${devtype} ${devnum}:${distro_bootpart} ${a_fdt} ${prefix}${fdt_file} ; then
@@ -81,20 +74,21 @@ else
 	exit;
 fi

-fdt resize 4096
-if itest.s "x" != "x${cmd_board}" ; then
-	run cmd_board
-fi
+fdt resize
 if itest.s "x" != "x${cmd_custom}" ; then
 	run cmd_custom
 fi
 if itest.s "x" != "x${cmd_hdmi}" ; then
 	run cmd_hdmi
-	if itest.s x != x${allow_noncea} ; then
+	if itest.s x == x${allow_noncea} ; then
+		setenv bootargs ${bootargs} mxc_hdmi.only_cea=1;
+		echo "only CEA modes allowed on HDMI port";
+	else
 		setenv bootargs ${bootargs} mxc_hdmi.only_cea=0;
 		echo "non-CEA modes allowed on HDMI, audio may be affected";
 	fi
 fi
+
 if itest.s "x" != "x${cmd_lcd}" ; then
 	run cmd_lcd
 fi
--- a/board/boundarydevices/common/post-image.sh
+++ b/board/boundarydevices/common/post-image.sh
@@ -1,5 +1,16 @@
 #!/bin/sh

-support/scripts/genimage.sh -c $(dirname $0)/genimage.cfg
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"

 exit $?
--- a/board/boundarydevices/common/readme.txt
+++ b/board/boundarydevices/common/readme.txt
@@ -1,6 +1,6 @@
 Buildroot for Boundary Devices platforms:

-https://boundarydevices.com/nitrogen-sbcs-and-soms/
+https://boundarydevices.com/product-category/popular-sbc-and-som-modules/

 Here is the list of targeted platforms per defconfig:

@@ -19,19 +19,7 @@ Here is the list of targeted platforms per defconfig:
 - nitrogen7_defconfig
  - Nitrogen7

- nitrogen8m_defconfig
-  - Nitrogen8M
-  - Nitrogen8M_SOM
-
- nitrogen8mm_defconfig
-  - Nitrogen8MMini
-  - Nitrogen8MMini_SOM
-
- nitrogen8mn_defconfig
-  - Nitrogen8MNano
-  - Nitrogen8MNano_SOM
-
-To install, simply copy the image to your storage (SD, eMMC, USB):
+To install, simply copy the image to a uSD card:

 $ sudo dd if=output/images/sdcard.img of=/dev/sdX

--- a/board/boundarydevices/common/upgrade.cmd
+++ b/board/boundarydevices/common/upgrade.cmd
@@ -13,14 +13,11 @@ if itest.s x51 == "x${imx_cpu}"; then
 	a_base=0x92000000
 elif itest.s x53 == "x${imx_cpu}"; then
 	a_base=0x72000000
-elif itest.s x6SX == "x${imx_cpu}" || itest.s x6ULL == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
+elif itest.s x6SX == "x${imx_cpu}" || itest.s x7D == "x${imx_cpu}"; then
 	a_base=0x82000000
-elif itest.s x8MQ == "x${imx_cpu}" || itest.s x8MM == "x${imx_cpu}" || itest.s x8MMQ == "x${imx_cpu}"; then
+elif itest.s x8MQ == "x${imx_cpu}"; then
 	a_base=0x42000000
 	offset=0x8400
-elif itest.s x8MNano == "x${imx_cpu}"; then
-	a_base=0x42000000
-	offset=0x8000
 fi

 qspi_match=1
@@ -59,7 +56,6 @@ mmc dev ${env_dev} ${env_part}
 mmc read ${a_uImage2} ${cntoffset} ${cntfile}
 if cmp.b ${a_uImage1} ${a_uImage2} ${filesize} ; then
 	echo "------- U-Boot versions match" ;
-	echo "------- U-Boot upgrade NOT needed" ;
 	exit ;
 fi

@@ -138,7 +134,7 @@ fi
 if cmp.b ${a_uImage1} ${a_uImage2} $filesize ; then
 	echo "------- U-Boot versions match" ;
 	if itest.s "${qspi_match}" == "1" ; then
-		echo "------- U-Boot upgrade NOT needed" ;
+		echo "------- upgrade not needed" ;
 		if itest.s "x" != "x${next}" ; then
 			if ${fs}load ${devtype} ${devnum}:${distro_bootpart} ${a_script} ${next} ; then
 				source ${a_script}
@@ -210,12 +206,6 @@ if itest.s "x" != "x${next}" ; then
 fi
 fi

-if itest.s "xno" == "x${reset}" ; then
-	while echo "---- U-Boot upgraded. Please reset the board" ; do
-		sleep 120
-	done
-fi
-echo "---- U-Boot upgraded. The board will now reset."
-sleep 1
-reset
+while echo "---- U-Boot upgraded. Please reset the board" ; do
+	sleep 120
 done
--- a/board/ci20/genimage.cfg
+++ b/board/ci20/genimage.cfg
@@ -24,5 +24,6 @@ image sdcard.img {
        partition-type = 0x83
        image = "rootfs.ext4"
        offset = 2M
+        size = 60M
    }
 }
--- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json
+++ b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap10.json
@@ -4,7 +4,7 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "1280x800"
    }
  ]
--- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json
+++ b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore-ofcap12.json
@@ -4,7 +4,7 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "1280x480"
    }
  ]
--- a/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json
+++ b/board/engicam/icorem6/rootfs_overlay/root/imx6qdl-icore.json
@@ -4,7 +4,7 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "800x480"
    }
  ]
--- a/board/firefly/roc-rk3399-pc/extlinux.conf
+++ b/board/firefly/roc-rk3399-pc/extlinux.conf
@@ -1,4 +0,0 @@
-label RK3399RocPC linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-roc-pc.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk0p1 rootwait
--- a/board/firefly/roc-rk3399-pc/genimage.cfg
+++ b/board/firefly/roc-rk3399-pc/genimage.cfg
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/firefly/roc-rk3399-pc/post-build.sh
+++ b/board/firefly/roc-rk3399-pc/post-build.sh
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
--- a/board/firefly/roc-rk3399-pc/readme.txt
+++ b/board/firefly/roc-rk3399-pc/readme.txt
@@ -1,40 +0,0 @@
-Libre Computer Board ROC-RK3399-PC
-===================================
-
-Build:
-
-  $ make roc_pc_rk3399_defconfig
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.elf
-├── idbloader.img
-├── Image
-├── rk3399-roc-pc.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-└── u-boot.itb
-
-Creating bootable SD card:
-==========================
-
-Simply invoke (as root)
-
-sudo dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
--------------
-
-Baudrate for this board is 1500000
-
-Wiki link:
-https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/roc-rk3399-pc.html
--- a/board/freescale/common/imx/genimage.cfg.template
+++ b/board/freescale/common/imx/genimage.cfg.template
@@ -9,7 +9,6 @@

 image boot.vfat {
  vfat {
-    label = "boot"
    files = {
      %FILES%
    }
--- a/board/freescale/common/imx/genimage.cfg.template_imx8
+++ b/board/freescale/common/imx/genimage.cfg.template_imx8
@@ -9,12 +9,11 @@

 image boot.vfat {
  vfat {
-    label = "boot"
    files = {
      %FILES%
    }
  }
-  size = 64M
+  size = 32M
 }

 image sdcard.img {
--- a/board/freescale/common/imx/genimage.cfg.template_spl
+++ b/board/freescale/common/imx/genimage.cfg.template_spl
@@ -9,7 +9,6 @@

 image boot.vfat {
  vfat {
-    label = "boot"
    files = {
      %FILES%
    }
--- a/board/freescale/common/imx/imx8-bootloader-prepare.sh
+++ b/board/freescale/common/imx/imx8-bootloader-prepare.sh
@@ -9,36 +9,26 @@ main ()
 	fi

 	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00910000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its

 		${HOST_DIR}/bin/mkimage_imx8 -fit -signed_hdmi ${BINARIES_DIR}/signed_hdmi_imx8m.bin -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
+		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/lpddr4_pmu_train_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
+		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot.bin ATF_LOAD_ADDR=0x00920000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
 		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
 		rm -f ${BINARIES_DIR}/u-boot.its

 		${HOST_DIR}/bin/mkimage_imx8 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x7E1000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
-		cat ${BINARIES_DIR}/u-boot-spl.bin ${BINARIES_DIR}/ddr_fw.bin > ${BINARIES_DIR}/u-boot-spl-ddr.bin
-		BL31=${BINARIES_DIR}/bl31.bin BL33=${BINARIES_DIR}/u-boot-nodtb.bin ATF_LOAD_ADDR=0x00960000 ${HOST_DIR}/bin/mkimage_fit_atf.sh ${UBOOT_DTB} > ${BINARIES_DIR}/u-boot.its
-		${HOST_DIR}/bin/mkimage -E -p 0x3000 -f ${BINARIES_DIR}/u-boot.its ${BINARIES_DIR}/u-boot.itb
-		rm -f ${BINARIES_DIR}/u-boot.its
-
-		${HOST_DIR}/bin/mkimage_imx8 -v v2 -fit -loader ${BINARIES_DIR}/u-boot-spl-ddr.bin 0x912000 -second_loader ${BINARIES_DIR}/u-boot.itb 0x40200000 0x60000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	else
 		${HOST_DIR}/bin/mkimage_imx8 -commit > ${BINARIES_DIR}/mkimg.commit
 		cat ${BINARIES_DIR}/u-boot.bin ${BINARIES_DIR}/mkimg.commit > ${BINARIES_DIR}/u-boot-hash.bin
 		cp ${BINARIES_DIR}/bl31.bin ${BINARIES_DIR}/u-boot-atf.bin
 		dd if=${BINARIES_DIR}/u-boot-hash.bin of=${BINARIES_DIR}/u-boot-atf.bin bs=1K seek=128
-		if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
-			${HOST_DIR}/bin/mkimage_imx8 -soc QM -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qm-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a53 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-		else
-			${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
-		fi
+
+		${HOST_DIR}/bin/mkimage_imx8 -soc QX -rev B0 -append ${BINARIES_DIR}/ahab-container.img -c -scfw ${BINARIES_DIR}/mx8qx-mek-scfw-tcm.bin -ap ${BINARIES_DIR}/u-boot-atf.bin a35 0x80000000 -out ${BINARIES_DIR}/imx8-boot-sd.bin
 	fi

 	exit $?
--- a/board/freescale/common/imx/post-image.sh
+++ b/board/freescale/common/imx/post-image.sh
@@ -32,14 +32,10 @@ linux_image()

 genimage_type()
 {
-	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8=y$" ${BR2_CONFIG}; then
-		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
+	if grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8M=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MM=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
-	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8MN=y$" ${BR2_CONFIG}; then
-		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_PACKAGE_FREESCALE_IMX_PLATFORM_IMX8X=y$" ${BR2_CONFIG}; then
 		echo "genimage.cfg.template_imx8"
 	elif grep -Eq "^BR2_LINUX_KERNEL_INSTALL_TARGET=y$" ${BR2_CONFIG}; then
--- a/board/freescale/common/mxs/genimage.cfg.template
+++ b/board/freescale/common/mxs/genimage.cfg.template
@@ -8,7 +8,6 @@

 image boot.vfat {
 	vfat {
-		label = "boot"
 		files = {
 			%FILES%
 		}
--- a/board/freescale/imx6-sabresd/linux_qt5.fragment
+++ b/board/freescale/imx6-sabresd/linux_qt5.fragment
@@ -2,3 +2,4 @@
 # ondemand governor with a mainline kernel.
 # CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND is not set
 CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y
+CONFIG_VIDEO_CODA=m
--- a/board/freescale/imx6-sabresd/readme.txt
+++ b/board/freescale/imx6-sabresd/readme.txt
@@ -80,7 +80,6 @@ Running kmscube application:
 Running Qt5 Cinematic Demo:

 # export QT_QPA_EGLFS_KMS_CONFIG=/root/sabresd.json
-# export QT_QPA_EGLFS_ALWAYS_SET_MODE=1
 # /usr/share/Qt5/CinematicExperience/Qt5_CinematicExperience

 Running gl2mark benchmark:
--- a/board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json
+++ b/board/freescale/imx6-sabresd/rootfs_overlay/root/sabresd.json
@@ -4,11 +4,11 @@
  "pbuffers": true,
  "outputs": [
    {
-      "name": "HDMI1",
+      "name": "HDMI-1",
      "mode": "off"
    },
    {
-      "name": "LVDS1",
+      "name": "LVDS-1",
      "mode": "1024x768"
    }
  ]
--- a/board/freescale/imx6sabre/patches/uboot/0002-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
+++ b/board/freescale/imx6sabre/patches/uboot/0002-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
+# mkimage source config file
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
+# How to create a cpp processed config file, they all use the same source
+%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+
--- a/board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
+++ b/board/freescale/imx6sabre/patches/uboot/uboot-0001-mx6qsabre_common-boot-Linux-to-init-in-mfgtools-mode.patch
@@ -1,4 +1,4 @@
-From e9b507b695331ef6fa941b471be0a7f284ec6980 Mon Sep 17 00:00:00 2001
+From 90ecc0ad14337898b75843efc6530fc4a34f7808 Mon Sep 17 00:00:00 2001
 From: =?UTF-8?q?Vincent=20Stehl=C3=A9?= <vincent.stehle@freescale.com>
 Date: Tue, 12 Aug 2014 10:17:31 +0200
 Subject: [PATCH] mx6qsabre_common: boot Linux to /init in mfgtools mode
@@ -14,24 +14,23 @@ This patch tells u-boot to tell the kernel to boot into /init (instead of
 buildroot system entirely through USB.

 Signed-off-by: Vincent Stehlé <vincent.stehle@freescale.com>
-Signed-off-by: Julien Olivain <julien.olivain@oss.nxp.com>
 ---
- include/configs/imx_env.h | 2 +-
+ include/configs/mx6sabre_common.h | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

-diff --git a/include/configs/imx_env.h b/include/configs/imx_env.h
-index 234af33e55..7e31d208dc 100644
--- a/include/configs/imx_env.h
-+++ b/include/configs/imx_env.h
-@@ -20,7 +20,7 @@
+diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h
+index 93d4c4b..d2e7efd 100644
+--- a/include/configs/mx6sabre_common.h
+++ b/include/configs/mx6sabre_common.h
+@@ -52,7 +52,7 @@
 
- #define CONFIG_MFG_ENV_SETTINGS_DEFAULT \
- 	"mfgtool_args=setenv bootargs console=${console},${baudrate} " \
+ #define CONFIG_MFG_ENV_SETTINGS \
+ 	"mfgtool_args=setenv bootargs console=" CONSOLE_DEV ",115200 " \
 -		"rdinit=/linuxrc " \
 +		"rdinit=/init " \
- 		"clk_ignore_unused "\
- 		"\0" \
- 	"kboot="MFG_BOOT_CMD"\0"\
+ 		"g_mass_storage.stall=0 g_mass_storage.removable=1 " \
+ 		"g_mass_storage.idVendor=0x066F g_mass_storage.idProduct=0x37FF "\
+ 		"g_mass_storage.iSerialNumber=\"\" "\
 -- 
-2.25.1
+2.1.4

--- a/board/freescale/imx6ullevk/readme.txt
+++ b/board/freescale/imx6ullevk/readme.txt
@@ -1,61 +0,0 @@
-****************************
-Freescale i.MX6ULL EVK board
-****************************
-
-This file documents the Buildroot support for the Freescale i.MX6ULL EVK board.
-
-Build
-=====
-
-First, configure Buildroot for your i.MX6ULL EVK board:
-
-  make freescale_imx6ullevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - boot.vfat
-  - imx6ull-14x14-evk.dtb
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.bin
-  - u-boot.imx
-  - zImage
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=./output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template.
-
-Boot the i.MX6ULL EVK board
-===========================
-
-To boot your newly created system (refer to the i.MX 6ULL EVK Quick Start Guide [1] for guidance):
- insert the SD card in the micro SD slot of the board;
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
-
-References
-==========
-[1] https://www.nxp.com/files-static/32bit/doc/brochure/IMX6ULLQSG.pdf
--- a/board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
+++ b/board/freescale/imx7dsdb/patches/uboot/0001-imx-Create-distinct-pre-processed-mkimage-config-fil.patch
@@ -0,0 +1,89 @@
+From 27a2cd6a1980adf3002412678c8fdec6528dc47d Mon Sep 17 00:00:00 2001
+From: Trent Piepho <tpiepho@impinj.com>
+Date: Fri, 6 Apr 2018 17:11:27 -0700
+Subject: [PATCH] imx: Create distinct pre-processed mkimage config files
+
+Each imx image is created by a separate sub-make and during this process
+the mkimage config file is run though cpp.
+
+The cpp output is to the same file no matter what imx image is being
+created.
+
+This means if two imx images are generated in parallel they will attempt
+to independently produce the same pre-processed mkimage config file at
+the same time.
+
+Avoid the problem by making the pre-processed config file name unique
+based on the imx image it will be used in.  This way each image will
+create a unique config file and they won't clobber each other when run
+in parallel.
+
+This should fixed the build bug referenced in b5b0e4e3 ("imximage:
+Remove failure when no IVT offset is found").
+
+Cc: Breno Lima <breno.lima@nxp.com>
+Cc: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
+Cc: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Trent Piepho <tpiepho@impinj.com>
+Tested-by: Fabio Estevam <fabio.estevam@nxp.com>
+[fabio: Adapted to imx_v2017.03_4.9.11_1.0.0_ga]
+Signed-off-by: Fabio Estevam <festevam@gmail.com>
+---
+ arch/arm/imx-common/Makefile | 15 ++++++++-------
+ 1 file changed, 8 insertions(+), 7 deletions(-)
+
+diff --git a/arch/arm/imx-common/Makefile b/arch/arm/imx-common/Makefile
+index d862258..f1bae8d 100644
+--- a/arch/arm/imx-common/Makefile
+++ b/arch/arm/imx-common/Makefile
+@@ -69,9 +69,11 @@ endif
+ quiet_cmd_cpp_cfg = CFGS    $@
+       cmd_cpp_cfg = $(CPP) $(cpp_flags) -x c -o $@ $<
+ 
+-IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%).cfgtmp
+# mkimage source config file
+IMX_CONFIG = $(CONFIG_IMX_CONFIG:"%"=%)
+ 
+-$(IMX_CONFIG): %.cfgtmp: % FORCE
+# How to create a cpp processed config file, they all use the same source
+%.cfgout: $(IMX_CONFIG) FORCE
+ 	$(Q)mkdir -p $(dir $@)
+ 	$(call if_changed_dep,cpp_cfg)
+ 
+@@ -79,7 +81,7 @@ MKIMAGEFLAGS_u-boot.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imxim
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot.imx: MKIMAGEOUTPUT = u-boot.imx.log
+ 
+-u-boot.imx: u-boot.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot.imx: u-boot.bin u-boot.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ ifeq ($(CONFIG_OF_SEPARATE),y)
+@@ -87,16 +89,15 @@ MKIMAGEFLAGS_u-boot-dtb.imx = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T i
+ 	-e $(CONFIG_SYS_TEXT_BASE)
+ u-boot-dtb.imx: MKIMAGEOUTPUT = u-boot-dtb.imx.log
+ 
+-u-boot-dtb.imx: u-boot-dtb.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+u-boot-dtb.imx: u-boot-dtb.bin u-boot-dtb.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ endif
+ 
+ MKIMAGEFLAGS_SPL = -n $(filter-out $(PLUGIN).bin $< $(PHONY),$^) -T imximage \
+ 	-e $(CONFIG_SPL_TEXT_BASE)
+-
+ SPL: MKIMAGEOUTPUT = SPL.log
+ 
+-SPL: spl/u-boot-spl.bin $(IMX_CONFIG) $(PLUGIN).bin FORCE
+SPL: spl/u-boot-spl.bin spl/u-boot-spl.cfgout $(PLUGIN).bin FORCE
+ 	$(call if_changed,mkimage)
+ 
+ MKIMAGEFLAGS_u-boot.uim = -A arm -O U-Boot -a $(CONFIG_SYS_TEXT_BASE) \
+@@ -124,4 +125,4 @@ cmd_u-boot-nand-spl_imx = (printf '\000\000\000\000\106\103\102\040\001' && \
+ spl/u-boot-nand-spl.imx: SPL FORCE
+ 	$(call if_changed,u-boot-nand-spl_imx)
+ 
+-targets += $(addprefix ../../../,$(IMX_CONFIG) SPL u-boot.uim spl/u-boot-nand-spl.imx)
+targets += $(addprefix ../../../,SPL spl/u-boot-spl.cfgout u-boot-dtb.cfgout u-boot.cfgout u-boot.uim spl/u-boot-nand-spl.imx)
+-- 
+2.7.4
+
--- a/board/freescale/imx8mnevk/readme.txt
+++ b/board/freescale/imx8mnevk/readme.txt
@@ -1,73 +0,0 @@
-***************************
-Freescale i.MX8MN EVK board
-***************************
-
-This file documents the Buildroot support for the i.MX8M Nano EVK board.
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8MN EVK board:
-
-  make freescale_imx8mnevk_defconfig
-
-Build all components:
-
-  make
-
-You will find in output/images/ the following files:
-  - bl31.bin
-  - boot.vfat
-  - ddr4_201810_fw.bin
-  - ddr_fw.bin
-  - fsl-imx8mn-ddr4-evk.dtb
-  - Image
-  - imx8-boot-sd.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot.bin
-  - u-boot.imx
-  - u-boot.itb
-  - u-boot-nodtb.bin
-  - u-boot-spl.bin
-  - u-boot-spl-ddr.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8MN EVK board
-==========================
-
-To boot your newly created system (refer to the i.MX8MNano EVK Quick Start Guide
-[1] for guidance):
- insert the SD card in the SD slot of the board;
- Configure the switches as follows (X = "don't care"):
-SW1101:	1100XXXXXX [D1-D10]
-SW1102:	XXXXXXXXXX [D1-D10]
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
-
-References
-==========
-[1] https://www.nxp.com/design/development-boards/i-mx-evaluation-and-development-boards/evaluation-kit-for-the-i-mx-8m-nano-applications-processor:8MNANOD4-EVK
--- a/board/freescale/imx8qmmek/readme.txt
+++ b/board/freescale/imx8qmmek/readme.txt
@@ -1,76 +0,0 @@
-***************************
-Freescale i.MX8QM MEK board
-***************************
-
-This file documents the Buildroot support for the NXP i.MX8QM MEK board.
-
-You will find a reference to the board on nxp.com:
-https://www.nxp.com/design/development-boards/i.mx-evaluation-and-development-boards/i.mx-8quadmax-multisensory-enablement-kit-mek:MCIMX8QM-CPU
-
-You can also find the get started guide here:
-https://www.nxp.com/document/guide/get-started-with-the-i.mx-8quadmax-mek:GS-iMX-8QM-MEK
-
-Build
-=====
-
-First, configure Buildroot for the i.MX8QM MEK board:
-
-$ make freescale_imx8qmmek_defconfig
-
-Build all components:
-
-$ make
-
-You will find in output/images/ the following files:
-  - ahab-container.img
-  - bl31.bin
-  - boot.vfat
-  - fsl-imx8qm-mek.dtb
-  - Image
-  - imx8-boot-sd.bin
-  - mkimg.commit
-  - mx8qm-mek-scfw-tcm.bin
-  - mx8qm-val-scfw-tcm.bin
-  - mx8qm-a0-ddr4-scfw-tcm.bin
-  - mx8qm-a0-mek-scfw-tcm.bin
-  - mx8qm-a0-val-scfw-tcm.bin
-  - mx8qm-ddr4-scfw-tcm.bin
-  - rootfs.ext2
-  - rootfs.ext4
-  - rootfs.tar
-  - sdcard.img
-  - u-boot-atf.bin
-  - u-boot.bin
-  - u-boot-hash.bin
-
-Create a bootable SD card
-=========================
-
-To determine the device associated to the SD card have a look in the
-/proc/partitions file:
-
-  cat /proc/partitions
-
-Buildroot prepares a bootable "sdcard.img" image in the output/images/
-directory, ready to be dumped on a SD card. Launch the following
-command as root:
-
-  dd if=output/images/sdcard.img of=/dev/<your-sd-device>
-
-*** WARNING! This will destroy all the card content. Use with care! ***
-
-For details about the medium image layout, see the definition in
-board/freescale/common/imx/genimage.cfg.template_imx8.
-
-Boot the i.MX8QM MEK board
-==========================
-
-To boot your newly created system:
- insert the SD card in the SD slot of the board;
- Configure the boot switch as follows:
-SW2:	OFF	OFF	ON	ON	OFF	OFF
- put a micro USB cable into the Debug USB Port and connect using a terminal
-  emulator at 115200 bps, 8n1;
- power on the board.
-
-Enjoy!
--- a/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
+++ b/board/friendlyarm/nanopi-neo-plus2/extlinux.conf
@@ -1,4 +0,0 @@
-label linux
-  kernel /Image
-  devicetree /sun50i-h5-nanopi-neo-plus2.dtb
-  append console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
--- a/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo-plus2/genimage.cfg
@@ -1,39 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"Image",
-			"sun50i-h5-nanopi-neo-plus2.dtb",
-			"extlinux"
-		}
-	}
-	size = 64M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition spl {
-		in-partition-table = "no"
-		image = "sunxi-spl.bin"
-		offset = 8192
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 40K
-		size = 1M # 1MB - 40K
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/friendlyarm/nanopi-neo-plus2/linux-extras.config
+++ b/board/friendlyarm/nanopi-neo-plus2/linux-extras.config
@@ -1,10 +0,0 @@
-# wireless core
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_CFG80211_WEXT=y
-
-# wireless drivers
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
--- a/board/friendlyarm/nanopi-neo-plus2/post-build.sh
+++ b/board/friendlyarm/nanopi-neo-plus2/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $BINARIES_DIR/extlinux/extlinux.conf
--- a/board/friendlyarm/nanopi-neo-plus2/readme.txt
+++ b/board/friendlyarm/nanopi-neo-plus2/readme.txt
@@ -1,37 +0,0 @@
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the Nanopi NEO Plus2. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-Nanopi NEO2 link:
-http://nanopi.io/nanopi-neo-plus2.html
-
-Wiki link:
-http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO_Plus2
-
-This configuration uses U-Boot mainline and kernel mainline.
-
-How to build
-============
-
-    $ make friendlyarm_nanopi_neo_plus2_defconfig
-    $ make
-
-Note: you will need access to the internet to download the required
-sources.
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-  $ sudo sync
-
-Insert the micro SDcard in your Nanopi NEO Plus2 and power it up. The console
-is on the serial line, 115200 8N1.
--- a/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
+++ b/board/friendlyarm/nanopi-neo-plus2/rootfs_overlay/lib/firmware/brcm/brcmfmac43430-sdio.friendlyarm,nanopi-neo-plus2.txt
@@ -1,53 +0,0 @@
-#AP6212_NVRAM_V1.0.1_20160606
-# 2.4 GHz, 20 MHz BW mode
-# The following parameter values are just placeholders, need to be updated.
-manfid=0x2d0
-prodid=0x0726
-vendid=0x14e4
-devid=0x43e2
-boardtype=0x0726
-boardrev=0x1101
-boardnum=22
-macaddr=00:90:4c:c5:12:38
-sromrev=11
-boardflags=0x00404201
-xtalfreq=26000
-nocrc=1
-ag0=255
-aa2g=1
-ccode=ALL
-
-pa0itssit=0x20
-extpagain2g=0
-
-#PA parameters for 2.4GHz, measured at CHIP OUTPUT
-pa2ga0=-168,7161,-820
-AvVmid_c0=0x0,0xc8
-cckpwroffset0=5
-
-# PPR params
-maxp2ga0=90
-txpwrbckof=6
-cckbw202gpo=0x5555
-legofdmbw202gpo=0x77777777
-mcsbw202gpo=0xaaaaaaaa
-
-# OFDM IIR :
-ofdmdigfilttype=7
-# PAPD mode:
-papdmode=2
-
-il0macaddr=00:90:4c:c5:12:38
-wl0id=0x431b
-
-#OOB parameters
-hostwake=0x40
-hostrdy=0x41
-usbrdy=0x03
-usbrdydelay=100
-deadman_to=0xffffffff
-# muxenab: 0x1 for UART enable, 0x10 for Host awake
-muxenab=0x10
-# CLDO PWM voltage settings - 0x4 - 1.1 volt
-#cldo_pwm=0x4
-glitch_based_crsmin=1
--- a/board/friendlyarm/nanopi-neo/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo/genimage.cfg
@@ -29,5 +29,6 @@ image sdcard.img {
 	partition rootfs {
 		partition-type = 0x83
 		image = "rootfs.ext4"
+		size = 32M
 	}
 }
--- a/board/friendlyarm/nanopi-neo/post-build.sh
+++ b/board/friendlyarm/nanopi-neo/post-build.sh
@@ -0,0 +1,12 @@
+#!/bin/sh
+# post-build.sh for Nanopi NEO, based on the Orange Pi PC
+# 2013, Carlo Caione <carlo.caione@gmail.com>
+# 2016, "Yann E. MORIN" <yann.morin.1998@free.fr>
+
+BOARD_DIR="$( dirname "${0}" )"
+MKIMAGE="${HOST_DIR}/bin/mkimage"
+BOOT_CMD="${BOARD_DIR}/boot.cmd"
+BOOT_CMD_H="${BINARIES_DIR}/boot.scr"
+
+# U-Boot script
+"${MKIMAGE}" -C none -A arm -T script -d "${BOOT_CMD}" "${BOOT_CMD_H}"
--- a/board/friendlyarm/nanopi-neo/post-image.sh
+++ b/board/friendlyarm/nanopi-neo/post-image.sh
@@ -0,0 +1,15 @@
+#!/bin/sh
+# post-image.sh for Nanopi NEO, based on the Orange Pi PC
+
+BOARD_DIR="$( dirname "${0}" )"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                               \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
--- a/board/friendlyarm/nanopi-neo4/extlinux.conf
+++ b/board/friendlyarm/nanopi-neo4/extlinux.conf
@@ -1,4 +0,0 @@
-label NanoPi Neo4 linux
-  kernel /boot/Image
-  devicetree /boot/rk3399-nanopi-neo4.dtb
-  append earlycon=uart8250,mmio32,0xff1a0000 root=/dev/mmcblk1p1 rootwait
--- a/board/friendlyarm/nanopi-neo4/genimage.cfg
+++ b/board/friendlyarm/nanopi-neo4/genimage.cfg
@@ -1,22 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot-tpl-spl-dtb {
-		in-partition-table = "no"
-		image = "idbloader.img"
-		offset = 32K
-	}
-
-	partition u-boot-dtb {
-		in-partition-table = "no"
-		image = "u-boot.itb"
-		offset = 8M
-		size = 30M
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/friendlyarm/nanopi-neo4/post-build.sh
+++ b/board/friendlyarm/nanopi-neo4/post-build.sh
@@ -1,5 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-
-install -m 0644 -D $BOARD_DIR/extlinux.conf $TARGET_DIR/boot/extlinux/extlinux.conf
--- a/board/friendlyarm/nanopi-neo4/readme.txt
+++ b/board/friendlyarm/nanopi-neo4/readme.txt
@@ -1,53 +0,0 @@
-Intro
-=====
-
-NanoPi Neo4 is a RK3399 SoC based ARM64 board.
-
-
-Official wiki: http://wiki.friendlyarm.com/wiki/index.php/NanoPi_NEO4
-Mainline wiki: https://wiki.amarulasolutions.com/bsp/rockchip/rk3399/neo4.html
-
-Build
-=====
-
-Run NanoPi Neo4 configuration
-
-  $ make nanopi_neo4_defconfig
-
-To build, run make comamnd.
-
-  $ make
-
-Files created in output directory
-=================================
-
-output/images
-
-├── bl31.bin
-├── bl31.elf
-├── Image
-├── rk3399-nanopi-neo4.dtb
-├── rootfs.ext2
-├── rootfs.ext4 -> rootfs.ext2
-├── rootfs.tar
-├── sdcard.img
-├── u-boot.bin
-├── u-boot.itb
-├── u-boot-spl-dtb.bin
-├── u-boot-tpl-dtb.bin
-├── u-boot-tpl-dtb.img
-└── u-boot-tpl-spl-dtb.img
-
-Creating bootable SD card:
-=========================
-
-Simply invoke (as root)
-
-  # dd if=output/images/sdcard.img of=/dev/sdX && sync
-
-Where X is your SD card device
-
-Serial console
--------------
-
-Baudrate for this board is 1500000
--- a/board/friendlyarm/nanopi-r1/boot.cmd
+++ b/board/friendlyarm/nanopi-r1/boot.cmd
@@ -1,8 +0,0 @@
-setenv fdt_high ffffffff
-
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun8i-h3-nanopi-r1.dtb
-
-bootz $kernel_addr_r - $fdt_addr_r
--- a/board/friendlyarm/nanopi-r1/genimage.cfg
+++ b/board/friendlyarm/nanopi-r1/genimage.cfg
@@ -1,36 +0,0 @@
-# Minimal SD card image for the NanoPi M1
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun8i-h3-nanopi-r1.dtb",
-			"boot.scr"
-		}
-	}
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
--- a/board/friendlyarm/nanopi-r1/kernel/linux-extras.config
+++ b/board/friendlyarm/nanopi-r1/kernel/linux-extras.config
@@ -1,2 +0,0 @@
-# USB ethernet
-CONFIG_USB_RTL8152=y
--- a/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
+++ b/board/friendlyarm/nanopi-r1/kernel/sun8i-h3-nanopi-r1.dts
@@ -1,170 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
-	model = "FriendlyElec NanoPi-R1";
-	compatible = "friendlyarm,nanopi-r1", "allwinner,sun8i-h3";
-
-	aliases {
-		serial1 = &uart3;
-		ethernet0 = &emac;
-		ethernet1 = &emac;
-		ethernet2 = &sdio_wifi;
-	};
-
-	wifi_pwrseq: wifi_pwrseq {
-		compatible = "mmc-pwrseq-simple";
-		pinctrl-names = "default";
-		reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
-	};
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-	leds {
-		/delete-node/ status;
-		/delete-node/ pwr;
-		led1 {
-			label = "LED1";
-			gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>;
-			linux,default-trigger = "heartbeat";
-		};
-
-		led2 {
-			label = "LED2";
-			gpios = <&pio 6 11 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "netdev";
-		};
-
-		led3 {
-			label = "LED3";
-			gpios = <&pio 0 9 GPIO_ACTIVE_HIGH>;
-			default-state = "off";
-			linux,default-trigger = "netdev";
-		};
-	};
-
-	r_gpio_keys {
-		compatible = "gpio-keys";
-		input-name = "k1";
-		pinctrl-names = "default";
-		pinctrl-0 = <&sw_r_npi>;
-
-		/delete-node/ k1;
-		reset {
-			label = "reset";
-			linux,code = <BTN_1>;
-			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
-		};
-	};
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
-
-&mmc1 {
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	mmc-pwrseq = <&wifi_pwrseq>;
-	bus-width = <4>;
-	non-removable;
-	status = "okay";
-
-	sdio_wifi: sdio_wifi@1 {
-		reg = <1>;
-		compatible = "brcm,bcm4329-fmac";
-		interrupt-parent = <&pio>;
-		interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
-		interrupt-names = "host-wake";
-	};
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	vqmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	status = "okay";
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&ohci1 {
-	status = "okay";
-};
-
-&usb_otg {
-	dr_mode = "peripheral";
-	status = "okay";
-};
-
-&usbphy {
-	status = "okay";
-};
--- a/board/friendlyarm/nanopi-r1/readme.txt
+++ b/board/friendlyarm/nanopi-r1/readme.txt
@@ -1,29 +0,0 @@
-NanoPi R1
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the NanoPi R1. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make nanopi_r1_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
--- a/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
+++ b/board/friendlyarm/nanopi-r1/uboot/nanopi_r1_defconfig
@@ -1,22 +0,0 @@
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_SPL=y
-CONFIG_MACH_SUN8I_H3=y
-CONFIG_DRAM_CLK=408
-CONFIG_DRAM_ZQ=3881979
-CONFIG_DRAM_ODT_EN=y
-CONFIG_MACPWR="PD6"
-# CONFIG_VIDEO_DE2 is not set
-CONFIG_NR_DRAM_BANKS=1
-# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
-CONFIG_CONSOLE_MUX=y
-CONFIG_SYS_CLK_FREQ=480000000
-# CONFIG_CMD_FLASH is not set
-# CONFIG_SPL_DOS_PARTITION is not set
-# CONFIG_SPL_EFI_PARTITION is not set
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-h3-nanopi-r1"
-CONFIG_SUN8I_EMAC=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_SYS_USB_EVENT_POLL_VIA_INT_QUEUE=y
-CONFIG_MMC_SUNXI_SLOT_EXTRA=2
--- a/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
+++ b/board/friendlyarm/nanopi-r1/uboot/sun8i-h3-nanopi-r1.dts
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2019 Igor Pecovnik <igor@armbian.com>
- *
- * This file is dual-licensed: you can use it either under the terms
- * of the GPL or the X11 license, at your option. Note that this dual
- * licensing only applies to this file, and not this project as a
- * whole.
- *
- *  a) This file is free software; you can redistribute it and/or
- *     modify it under the terms of the GNU General Public License as
- *     published by the Free Software Foundation; either version 2 of the
- *     License, or (at your option) any later version.
- *
- *     This file is distributed in the hope that it will be useful,
- *     but WITHOUT ANY WARRANTY; without even the implied warranty of
- *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- *     GNU General Public License for more details.
- *
- * Or, alternatively,
- *
- *  b) Permission is hereby granted, free of charge, to any person
- *     obtaining a copy of this software and associated documentation
- *     files (the "Software"), to deal in the Software without
- *     restriction, including without limitation the rights to use,
- *     copy, modify, merge, publish, distribute, sublicense, and/or
- *     sell copies of the Software, and to permit persons to whom the
- *     Software is furnished to do so, subject to the following
- *     conditions:
- *
- *     The above copyright notice and this permission notice shall be
- *     included in all copies or substantial portions of the Software.
- *
- *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
- *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
- *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
- *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
- *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
- *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
- *     OTHER DEALINGS IN THE SOFTWARE.
- */
-
-#include "sun8i-h3-nanopi.dtsi"
-
-/ {
-	model = "FriendlyARM NanoPi R1";
-	compatible = "friendlyarm,nanopi-neo", "allwinner,sun8i-h3";
-
-	reg_gmac_3v3: gmac-3v3 {
-		compatible = "regulator-fixed";
-		pinctrl-names = "default";
-		regulator-name = "gmac-3v3";
-		regulator-min-microvolt = <3300000>;
-		regulator-max-microvolt = <3300000>;
-		startup-delay-us = <100000>;
-		enable-active-high;
-		gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>;
-	};
-
-};
-
-&ehci0 {
-	status = "okay";
-};
-
-&pio {
-	gmac_power_pin_nanopi: gmac_power_pin@0 {
-		pins = "PD6";
-		function = "gpio_out";
-	};
-};
-
-&ohci0 {
-	status = "okay";
-};
-
-&mmc2 {
-	pinctrl-names = "default";
-	pinctrl-0 = <&mmc2_8bit_pins>;
-	vmmc-supply = <&reg_vcc3v3>;
-	bus-width = <8>;
-	non-removable;
-	cap-mmc-hw-reset;
-	status = "okay";
-};
-
-&emac {
-	pinctrl-names = "default";
-	pinctrl-0 = <&emac_rgmii_pins>;
-	phy-supply = <&reg_gmac_3v3>;
-	phy-handle = <&ext_rgmii_phy>;
-	phy-mode = "rgmii";
-
-	status = "okay";
-};
-
-&external_mdio {
-	ext_rgmii_phy: ethernet-phy@1 {
-		compatible = "ethernet-phy-ieee802.3-c22";
-		reg = <7>;
-	};
-};
--- a/board/grinn/chiliboard/post-image.sh
+++ b/board/grinn/chiliboard/post-image.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/grinn/liteboard/post-image.sh
+++ b/board/grinn/liteboard/post-image.sh
@@ -0,0 +1,14 @@
+#!/usr/bin/env bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/hardkernel/odroidc2/boot.ini
+++ b/board/hardkernel/odroidc2/boot.ini
@@ -0,0 +1,176 @@
+ODROIDC2-UBOOT-CONFIG
+
+########################################################################
+# Changes made to this are overwritten every time there's a new upgrade
+# To make your changes permanent change it on 
+# boot.ini.default
+# After changing it on boot.ini.default run the bootini command to
+# rewrite this file with your personal permanent settings.
+# Documentation: http://odroid.com/dokuwiki/doku.php?id=en:c2_persistent_bootini
+########################################################################
+
+# Possible screen resolutions
+# Uncomment only a single Line! The line with setenv written.
+# At least one mode must be selected.
+
+# Custom modeline!
+# To use custom modeline you need to disable all the below resolutions
+# and setup your own! 
+# For more information check our wiki: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_hdmi_autosetting
+# Example below:
+# setenv m "custombuilt" 
+# setenv modeline "1920,1200,154000,74040,60,1920,1968,2000,2080,1200,1202,1208,1235,1,0,1"
+
+# 480 Lines (720x480)
+# setenv m "480i60hz" # Interlaced 60Hz
+# setenv m "480i_rpt" # Interlaced for Rear Projection Televisions 60Hz
+# setenv m "480p60hz" # 480 Progressive 60Hz
+# setenv m "480p_rpt" # 480 Progressive for Rear Projection Televisions 60Hz
+
+# 576 Lines (720x576)
+# setenv m "576i50hz" # Interlaced 50Hz
+# setenv m "576i_rpt" # Interlaced for Rear Projection Televisions 50Hz
+# setenv m "576p50hz" # Progressive 50Hz
+# setenv m "576p_rpt" # Progressive for Rear Projection Televisions 50Hz
+
+# 720 Lines (1280x720)
+# setenv m "720p50hz" # 50Hz
+# setenv m "720p60hz" # 60Hz
+
+# 1080 Lines (1920x1080)
+# setenv m "1080i60hz" # Interlaced 60Hz
+setenv m "1080p60hz" # Progressive 60Hz
+# setenv m "1080i50hz" # Interlaced 50Hz
+# setenv m "1080p50hz" # Progressive 50Hz
+# setenv m "1080p24hz" # Progressive 24Hz
+
+# 4K (3840x2160)
+# setenv m "2160p30hz"    # Progressive 30Hz
+# setenv m "2160p25hz"    # Progressive 25Hz
+# setenv m "2160p24hz"    # Progressive 24Hz
+# setenv m "smpte24hz"    # Progressive 24Hz SMPTE
+# setenv m "2160p50hz"    # Progressive 50Hz
+# setenv m "2160p60hz"    # Progressive 60Hz
+# setenv m "2160p50hz420" # Progressive 50Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+# setenv m "2160p60hz420" # Progressive 60Hz with YCbCr 4:2:0 (Requires TV/Monitor that supports it)
+
+### VESA modes ###
+# setenv m "640x480p60hz"
+# setenv m "800x480p60hz"
+# setenv m "480x800p60hz"
+# setenv m "800x600p60hz"
+# setenv m "1024x600p60hz"
+# setenv m "1024x768p60hz"  
+# setenv m "1280x800p60hz"
+# setenv m "1280x1024p60hz"
+# setenv m "1360x768p60hz"
+# setenv m "1440x900p60hz"
+# setenv m "1600x900p60hz"
+# setenv m "1680x1050p60hz"
+# setenv m "1600x1200p60hz"
+# setenv m "1920x1200p60hz"
+# setenv m "2560x1080p60hz"
+# setenv m "2560x1440p60hz"
+# setenv m "2560x1600p60hz"
+# setenv m "3440x1440p60hz"
+
+# HDMI BPP Mode
+setenv m_bpp "32"
+# setenv m_bpp "24"
+# setenv m_bpp "16"
+
+# HDMI DVI/VGA modes
+# By default its set to HDMI, if needed change below.
+# Uncomment only a single Line.
+# setenv vout "dvi"
+# setenv vout "vga"
+
+# HDMI HotPlug Detection control
+# Allows you to force HDMI thinking that the cable is connected.
+# true = HDMI will believe that cable is always connected
+# false = will let board/monitor negotiate the connection status
+setenv hpd "true"
+# setenv hpd "false"
+
+# Monitor output
+# Controls if HDMI PHY should output anything to the monitor
+setenv monitor_onoff "false" # true or false
+
+# Server Mode (aka. No Graphics)
+# Setting nographics to 1 will disable all video subsystem
+# This mode is ideal of server type usage. (Saves ~300Mb of RAM)
+setenv nographics "0"
+
+# Meson Timer
+# 1 - Meson Timer
+# 0 - Arch Timer 
+# Using meson_timer improves the video playback however it breaks KVM (virtualization).
+# Using arch timer allows KVM/Virtualization to work however you'll experience poor video
+setenv mesontimer "1"
+
+# UHS (Ultra High Speed) MicroSD mode enable/disable
+setenv disableuhs "false"
+
+# MicroSD Card Detection enable/disable
+# Force the MMC controlled to believe that a card is connected.
+setenv mmc_removable "true"
+
+# USB Multi WebCam tweak
+# Only enable this if you use it.
+setenv usbmulticam "false"
+
+# Default Console Device Setting
+setenv condev "console=ttyS0,115200n8 console=tty0"   # on both
+
+# CPU Frequency / Cores control
+###########################################
+### WARNING!!! WARNING!!! WARNING!!!
+# Before changing anything here please read the wiki entry: 
+# http://odroid.com/dokuwiki/doku.php?id=en:c2_set_cpu_freq
+#
+# MAX CPU's
+# setenv maxcpus "1"
+# setenv maxcpus "2"
+# setenv maxcpus "3"
+setenv maxcpus "4"
+
+# MAX Frequency
+# setenv max_freq "2016"  # 2.016GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1944"  # 1.944GHz
+# setenv max_freq "1920"  # 1.920GHz
+# setenv max_freq "1896"  # 1.896GHz
+# setenv max_freq "1752"  # 1.752GHz
+# setenv max_freq "1680"  # 1.680GHz
+# setenv max_freq "1656"  # 1.656GHz
+setenv max_freq "1536"  # 1.536GHz
+
+
+
+###########################################
+
+# Boot Arguments
+if test "${m}" = "custombuilt"; then setenv cmode "modeline=${modeline}"; fi
+
+setenv bootargs "root=/dev/mmcblk0p2 rootwait ro ${condev} no_console_suspend hdmimode=${m} ${cmode} m_bpp=${m_bpp} vout=${vout} fsck.repair=yes net.ifnames=0 elevator=noop disablehpd=${hpd} max_freq=${max_freq} maxcpus=${maxcpus} monitor_onoff=${monitor_onoff} disableuhs=${disableuhs} mmc_removable=${mmc_removable} usbmulticam=${usbmulticam}"
+
+# Booting
+
+setenv loadaddr "0x11000000"
+setenv dtb_loadaddr "0x1000000"
+setenv initrd_loadaddr "0x13000000"
+
+fatload mmc 0:1 ${loadaddr} Image
+fatload mmc 0:1 ${dtb_loadaddr} meson64_odroidc2.dtb
+fdt addr ${dtb_loadaddr}
+
+if test "${mesontimer}" = "0"; then fdt rm /meson_timer; fdt rm /cpus/cpu@0/timer; fdt rm /cpus/cpu@1/timer; fdt rm /cpus/cpu@2/timer; fdt rm /cpus/cpu@3/timer; fi
+if test "${mesontimer}" = "1"; then fdt rm /timer; fi
+
+if test "${nographics}" = "1"; then fdt rm /reserved-memory; fdt rm /aocec; fi
+if test "${nographics}" = "1"; then fdt rm /meson-fb; fdt rm /amhdmitx; fdt rm /picdec; fdt rm /ppmgr; fi
+if test "${nographics}" = "1"; then fdt rm /meson-vout; fdt rm /mesonstream; fdt rm /meson-fb; fi
+if test "${nographics}" = "1"; then fdt rm /deinterlace; fdt rm /codec_mm; fi
+
+booti ${loadaddr} - ${dtb_loadaddr}
--- a/board/hardkernel/odroidc2/genimage.cfg
+++ b/board/hardkernel/odroidc2/genimage.cfg
@@ -1,24 +1,22 @@
 image boot.vfat {
 	vfat {
 		files = {
-			"MLO",
-			"u-boot.img",
-			"zImage",
-			"am5729-beagleboneai.dtb",
-			"uEnv.txt"
+			"boot.ini",
+			"Image",
+			"meson64_odroidc2.dtb"
 		}
 	}
-	size = 16M
+	size = 32M
 }

 image sdcard.img {
 	hdimage {
 	}

-	partition u-boot {
+	partition vfat {
 		partition-type = 0xC
-		bootable = "true"
-                image = "boot.vfat"
+		image = "boot.vfat"
+		offset = 1048576
 	}

 	partition rootfs {
--- a/board/hardkernel/odroidc2/post-image.sh
+++ b/board/hardkernel/odroidc2/post-image.sh
@@ -0,0 +1,19 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+cp ${BOARD_DIR}/boot.ini ${BINARIES_DIR}/
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=1 count=442 conv=sync,notrunc
+dd if=${BINARIES_DIR}/u-boot.bin of=${BINARIES_DIR}/sdcard.img bs=512 skip=1 seek=1 conv=fsync,notrunc
--- a/board/hardkernel/odroidc2/readme.txt
+++ b/board/hardkernel/odroidc2/readme.txt
@@ -0,0 +1,53 @@
+ODROID-C2
+
+Intro
+=====
+To be able to use ODROID-C2 board with the images generated by
+Buildroot, you have to prepare the SDCard or eMMC.
+
+How to build it
+===============
+
+  $ make odroidc2_defconfig
+
+Then you can edit the build options using
+
+  $ make menuconfig
+
+Compile all and build rootfs image:
+
+  $ make
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    +-- Image
+    +-- boot.ini                   [1]
+    +-- boot.vfat
+    +-- meson64_odroidc2.dtb
+    +-- rootfs.ext2
+    +-- rootfs.ext4
+    +-- rootfs.tar
+    +-- sdcard.img
+    `-- u-boot.bin
+
+[1] This is the ODROID-C2 configuration file used in u-boot.
+
+How to write the SD card or eMMC
+================================
+
+Once the build process is finished you will have an image called "sdcard.img"
+in the output/images/ directory.
+
+Copy the bootable "sdcard.img" onto an SD card or eMMC with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
+
+Insert the SDcard into your ODROID-C2, and power it up. Your new system
+should come up now.
--- a/board/librecomputer/lafrite/genimage.cfg
+++ b/board/librecomputer/lafrite/genimage.cfg
@@ -1,10 +0,0 @@
-image usb.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}
--- a/board/librecomputer/lafrite/overlay/extlinux/extlinux.conf
+++ b/board/librecomputer/lafrite/overlay/extlinux/extlinux.conf
@@ -1,4 +0,0 @@
-label linux
-  kernel /boot/Image
-  devicetree /boot/meson-gxl-s805x-libretech-ac.dtb
-  append console=ttyAML0,115200 earlyprintk root=/dev/sda1 rootwait
--- a/board/librecomputer/lafrite/readme.txt
+++ b/board/librecomputer/lafrite/readme.txt
@@ -1,34 +0,0 @@
-Intro
-=====
-
-Libre Computer "La Frite" is a low cost SBC based around an Amlogic
-s805x SoC (quad A53), 512MB/1GB DDR4 and a 16MB SPI NOR flash:
-
-https://libre.computer/products/boards/aml-s805x-ac/
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make lafrite_defconfig
-
-Compile everything and build the USB flash drive image:
-
-    $ make
-
-How to write the USB flash drive image
-======================================
-
-Once the build process is finished you will have an image called "usb.img"
-in the output/images/ directory.
-
-Copy the bootable "usb.img" onto a USB flash drive with "dd":
-
-  $ sudo dd if=output/images/usb.img of=/dev/sdX
-
-How to boot
-===========
-
-Insert flash drive to the USB connector furthest away from the IR
-receiver and power up board. The system will boot automatically.
--- a/board/minnowboard/post-image.sh
+++ b/board/minnowboard/post-image.sh
@@ -0,0 +1,13 @@
+#!/bin/sh -e
+
+GENIMAGE_CFG="board/minnowboard/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+    --rootpath "${TARGET_DIR}" \
+    --tmppath "${GENIMAGE_TMP}" \
+    --inputpath "${BINARIES_DIR}" \
+    --outputpath "${BINARIES_DIR}" \
+    --config "${GENIMAGE_CFG}"
--- a/board/olpc/genimage.cfg
+++ b/board/olpc/genimage.cfg
@@ -1,9 +0,0 @@
-image sdcard.img {
-	hdimage {
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-	}
-}
--- a/board/olpc/linux.config
+++ b/board/olpc/linux.config
@@ -1,66 +0,0 @@
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_PREEMPT=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_WEXT=y
-CONFIG_MAC80211=y
-CONFIG_RFKILL=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_SCSI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_BLK_DEV_SR=y
-CONFIG_CHR_DEV_SG=y
-CONFIG_NETDEVICES=y
-CONFIG_LIBERTAS=m
-CONFIG_INPUT_MOUSEDEV=y
-CONFIG_INPUT_MOUSEDEV_PSAUX=y
-CONFIG_INPUT_MOUSEDEV_SCREEN_X=1200
-CONFIG_INPUT_MOUSEDEV_SCREEN_Y=900
-CONFIG_INPUT_EVDEV=y
-CONFIG_INPUT_TABLET=y
-CONFIG_SERIO_OLPC_APSP=y
-CONFIG_SERIAL_8250=y
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_BATTERY_OLPC=y
-CONFIG_REGULATOR_FIXED_VOLTAGE=y
-CONFIG_MEDIA_SUPPORT=y
-CONFIG_MEDIA_CAMERA_SUPPORT=y
-CONFIG_MEDIA_CONTROLLER=y
-CONFIG_VIDEO_V4L2_SUBDEV_API=y
-CONFIG_MEDIA_USB_SUPPORT=y
-CONFIG_USB_VIDEO_CLASS=m
-CONFIG_V4L_PLATFORM_DRIVERS=y
-CONFIG_DRM=y
-CONFIG_DRM_PANEL_SIMPLE=m
-CONFIG_FRAMEBUFFER_CONSOLE=y
-CONFIG_FB_SIMPLE=y
-CONFIG_LCD_CLASS_DEVICE=y
-CONFIG_SOUND=y
-CONFIG_SND=y
-CONFIG_USB=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_STORAGE=y
-CONFIG_MMC=y
-CONFIG_MMC_SDHCI=y
-CONFIG_MMC_SDHCI_PCI=y
-CONFIG_MMC_SDHCI_PLTFM=y
-CONFIG_LEDS_CLASS=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_RTC_CLASS=y
-CONFIG_EXT4_FS=y
-CONFIG_MSDOS_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_FONTS=y
-CONFIG_FONT_TER16x32=y
--- a/board/olpc/olpc.fth
+++ b/board/olpc/olpc.fth
@@ -1,46 +0,0 @@
-\ OLPC XO boot script
-
-: (visible)  " unfreeze visible" evaluate  ;
-' (visible) catch  drop  forget (visible)
-
-" /aliases" find-device " last" get-property
-abort" No last alias"
-" /pci/sd@c"          2over substring?  if  " root=/dev/mmcblk0p1 " to boot-file  then
-" /sd/sdhci@d4280000" 2over substring?  if  " root=/dev/mmcblk1p1 " to boot-file  then
-" /pci/usb@"          2over substring?  if  " root=/dev/sda1 "      to boot-file  then
-" /usb@"              2over substring?  if  " root=/dev/sda1 "      to boot-file  then
-2drop
-
-root-device " compatible" get-property dend  if  0 0  then  ( compatible$ )
-" olpc,xo-1.75" 2over sindex -1 > if  ( compatible$ )
-   \ Version check on XO-1.75
-   " mrvl,mmp2" 2over sindex -1 =  if ( compatible$ )
-      2drop                           ( )
-      cr
-      ." Firmware Q4E00 or newer is needed to boot a Devicetree enabled kernel." cr
-      cr
-      ." One way to update is to copy http://dev.laptop.org/~quozl/q4e00ja.rom" cr
-      ." to a FAT partition on a USB flash stick and run ""flash u:\q4e00ja.rom""" cr
-      cr
-      ." Aborting boot." cr
-      " show-sad" evaluate
-      abort
-   then
-then ( compatible$ )
-
-" mmp" 2swap sindex -1 > if
-   \ A Marvell MMP-based machine
-   " last:\boot\zImage" to boot-device
-   boot-file " console=ttyS2,115200 " $cat2 to boot-file
-else
-    \ Assume XO-1
-   " last:\boot\bzImage" to boot-device
-   boot-file " console=ttyS0,115200 reboot=pci " $cat2 to boot-file
-then
-
-\ Pick a terminal that looks better on the XO screen
-root-device " architecture" get-property dend  if  0 0  else  1-  then
-" OLPC" $=  if  boot-file " fbcon=font:TER16x32 vt.color=0xf0 " $cat2 to boot-file  then
-
-boot-file " console=tty0 rootwait" $cat2 to boot-file
-boot
--- a/board/olpc/post-build.sh
+++ b/board/olpc/post-build.sh
@@ -1,4 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-install -m 0644 -D $BOARD_DIR/olpc.fth $TARGET_DIR/boot/olpc.fth
--- a/board/olpc/readme.txt
+++ b/board/olpc/readme.txt
@@ -1,78 +0,0 @@
-OLPC XO Laptops
-===============
-
-This document explains how to build and run images that run on the OLPC
-XO laptops.
-
-Supported models
----------------
-
-* OLPC XO-1
-  The original NS Geode based OLPC laptop, uses the x86 architecture.
-
-* OLPC XO-7.5
-  The ARM-based laptop. Needs a recent enough firmware to provide a good
-  enough flattened device tree to the kernel.
-
-Configure and build
-===================
-
-  $ make olpc_xo1_defconfig   # Configure for XO-1
-
-or:
-
-  $ make olpc_xo175_defconfig # Configure for XO-1.75
-
-Then:
-
-  $ make menuconfig           # Customize the build configuration
-  $ make                      # Build
-
-Create the bootable media
-=========================
-
-When the build is finished, the resulting image file will be called
-"sdcard.img". It can be written directly to a SD-card or and USB flash stick.
-
-Please double check that you're using the right device (e.g. with "lsblk"
-command). Doing the following will DESTROY ALL DATA that's currently on the
-media.
-
-  # cat output/images/sdcard.img >/dev/<device>
-
-Preparing the machine
-=====================
-
-Firmware security
-----------------
-
-Most OLPC machines were shipped with the security system that disallows
-booting unsigned software. If this is the case with your machine, in order
-to run the image you've built on it you'll need to get a developer key and
-deactivate the security system.
-
-The procedure is descriped in the OLPC wiki:
-http://wiki.laptop.org/go/Activation_and_Developer_Keys
-
-Firmware upgrade
----------------
-
-It is always preferrable to use an up to date firmware. The firmware images
-are available at http://wiki.laptop.org/go/Firmware. For the XO-1.75 laptop
-to boot the mainline kernel a firmware Q4E00JA or newer is needed. You can
-get it at http://dev.laptop.org/~quozl/q4e00ja.rom.
-
-To update the firmware, place the .rom file on to your bootable media,
-connect a charged battery pack and a wall adapter, and enter the Open
-Firmware prompt by pressing ESC during the early boot (needs an unlocked
-laptop -- see "Firmware security" above). Then use the "flash" command
-to update the firmware:
-
-  ok flash ext:\q4e00ja.rom   \ Flash the "q4e00ja.rom" from the SD card
-  ok flash u:\q4e00ja.rom     \ Flash the "q4e00ja.rom" from USB stick
-
-Booting the machine
-===================
-
-Once your machine is unlocked, it will automatically boot from your media
-wherever it will detect it attached to the USB bus or the SD card slot.
--- a/board/olpc/xo-1.75/linux.config
+++ b/board/olpc/xo-1.75/linux.config
@@ -1,47 +0,0 @@
-CONFIG_ARCH_MMP=y
-CONFIG_MACH_MMP2_DT=y
-CONFIG_MACH_MMP3_DT=y
-CONFIG_USB_EHCI_MV_U2O=y
-CONFIG_SMP=y
-CONFIG_NR_CPUS=2
-CONFIG_HIGHMEM=y
-CONFIG_FORCE_MAX_ZONEORDER=16
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-CONFIG_VFP=y
-CONFIG_NEON=y
-CONFIG_REGULATOR_88PG86X=m
-CONFIG_VIDEO_MMP_CAMERA=y
-CONFIG_DRM_ARMADA=y
-CONFIG_DRM_DISPLAY_CONNECTOR=m
-CONFIG_DRM_SIMPLE_BRIDGE=m
-CONFIG_DRM_ETNAVIV=m
-CONFIG_BACKLIGHT_CLASS_DEVICE=y
-CONFIG_USB_EHCI_MV=y
-CONFIG_MMC_SDHCI_PXAV3=y
-CONFIG_OLPC_XO175=y
-CONFIG_OLPC_XO175_EC=y
-CONFIG_PHY_PXA_USB=y
-CONFIG_PHY_MMP3_USB=y
-CONFIG_CRYPTO_LZO=m
-CONFIG_LIBERTAS_SDIO=m
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_MWIFIEX=m
-CONFIG_MWIFIEX_SDIO=m
-CONFIG_MTD_SPI_NOR=m
-CONFIG_MTD=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_SPI_NOR=m
-CONFIG_I2C_PXA=y
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SPI=y
-CONFIG_SPI_PXA2XX=y
-CONFIG_SPI_SLAVE=y
-CONFIG_SND_SOC=y
-CONFIG_SND_SOC_RT5631=y
-CONFIG_PWRSEQ_SD8787=m
-CONFIG_RTC_DRV_DS1307=y
-CONFIG_INPUT_TOUCHSCREEN=y
-CONFIG_TOUCHSCREEN_ZFORCE=y
--- a/board/olpc/xo-1/linux.config
+++ b/board/olpc/xo-1/linux.config
@@ -1,81 +0,0 @@
-# CONFIG_64BIT is not set
-CONFIG_IOSF_MBI=y
-CONFIG_MGEODE_LX=y
-CONFIG_X86_MSR=y
-CONFIG_HZ_100=y
-CONFIG_KEXEC=y
-CONFIG_PHYSICAL_START=0x400000
-CONFIG_CMDLINE_BOOL=y
-# CONFIG_ACPI is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_OLPC=y
-CONFIG_OLPC_XO1_PM=y
-CONFIG_OLPC_XO1_RTC=y
-CONFIG_OLPC_XO1_SCI=y
-# CONFIG_FIRMWARE_MEMMAP is not set
-# CONFIG_VIRTUALIZATION is not set
-CONFIG_ARCH_MMAP_RND_BITS=16
-CONFIG_REFCOUNT_FULL=y
-CONFIG_SPARSEMEM_MANUAL=y
-CONFIG_CMA=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=0
-CONFIG_MTD_ONENAND_GENERIC=y
-CONFIG_MTD_NAND_CAFE=y
-CONFIG_MTD_UBI=y
-CONFIG_CS5535_MFGPT=y
-CONFIG_CS5535_CLOCK_EVENT_SRC=y
-CONFIG_SENSORS_LIS3_SPI=y
-CONFIG_MOUSE_PS2_OLPC=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_8250_EXTENDED=y
-CONFIG_SERIAL_8250_MANY_PORTS=y
-CONFIG_SERIAL_8250_SHARE_IRQ=y
-CONFIG_SERIAL_8250_DETECT_IRQ=y
-CONFIG_SERIAL_8250_RSA=y
-CONFIG_HW_RANDOM=y
-# CONFIG_HW_RANDOM_VIA is not set
-CONFIG_NVRAM=y
-CONFIG_SCx200_ACB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_SINGLE=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_GPIO_CS5535=y
-CONFIG_THERMAL=y
-CONFIG_WATCHDOG=y
-CONFIG_GEODE_WDT=y
-CONFIG_MFD_CS5535=y
-CONFIG_MFD_MAX8925=y
-CONFIG_VIDEO_CAFE_CCIC=y
-CONFIG_FB_TILEBLITTING=y
-CONFIG_FB_VESA=y
-CONFIG_FB_GEODE=y
-CONFIG_FB_GEODE_LX=y
-CONFIG_BACKLIGHT_MAX8925=y
-CONFIG_VGACON_SOFT_SCROLLBACK=y
-CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y
-CONFIG_SND_OSSEMUL=y
-CONFIG_SND_DYNAMIC_MINORS=y
-CONFIG_SND_AC97_POWER_SAVE=y
-CONFIG_SND_CS5535AUDIO=y
-CONFIG_USB_EHCI_ROOT_HUB_TT=y
-CONFIG_USB_OHCI_HCD=y
-CONFIG_FB_OLPC_DCON=y
-CONFIG_XO1_RFKILL=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_GENERIC_PHY=y
-CONFIG_PROC_KCORE=y
-CONFIG_HUGETLBFS=y
-CONFIG_JFFS2_FS_WBUF_VERIFY=y
-CONFIG_JFFS2_SUMMARY=y
-CONFIG_JFFS2_FS_XATTR=y
-CONFIG_JFFS2_COMPRESSION_OPTIONS=y
-CONFIG_UBIFS_FS=y
-CONFIG_PCI=y
-CONFIG_LIBERTAS_USB=m
-CONFIG_LIBERTAS_MESH=y
-CONFIG_LIBERTAS_THINFIRM=m
-CONFIG_LIBERTAS_THINFIRM_USB=m
--- a/board/pandaboard/post-image.sh
+++ b/board/pandaboard/post-image.sh
@@ -0,0 +1,16 @@
+#!/bin/sh
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage                           \
+	--rootpath "${TARGET_DIR}"     \
+	--tmppath "${GENIMAGE_TMP}"    \
+	--inputpath "${BINARIES_DIR}"  \
+	--outputpath "${BINARIES_DIR}" \
+	--config "${GENIMAGE_CFG}"
+
+exit $?
--- a/board/pc/genimage-efi.cfg
+++ b/board/pc/genimage-efi.cfg
@@ -1,35 +0,0 @@
-image efi-part.vfat {
-  vfat {
-    file startup.nsh {
-      image = "efi-part/startup.nsh"
-    }
-    file EFI {
-      image = "efi-part/EFI"
-    }
-    file bzImage {
-      image = "bzImage"
-    }
-  }
-  size = 16777216
-}
-
-image disk.img {
-  hdimage {
-    gpt = true
-  }
-
-  partition boot {
-    image = "efi-part.vfat"
-    partition-type-uuid = c12a7328-f81f-11d2-ba4b-00a0c93ec93b
-    offset = 32768
-    size = 16777216
-    bootable = true
-  }
-
-  partition root {
-    partition-type-uuid = 44479540-f297-41b2-9af7-d131d5f0458a
-    partition-uuid = UUID_TMP
-    image = "rootfs.ext2"
-    offset = 16809984
-  }
-}
--- a/board/pc/grub-efi.cfg
+++ b/board/pc/grub-efi.cfg
@@ -1,6 +0,0 @@
-set default="0"
-set timeout="5"
-
-menuentry "Buildroot" {
- linux /bzImage root=PARTUUID=UUID_TMP rootwait console=tty1
-}
--- a/board/pc/post-build.sh
+++ b/board/pc/post-build.sh
@@ -4,12 +4,7 @@ set -e

 BOARD_DIR=$(dirname "$0")

-# Detect boot strategy, EFI or BIOS
-if [ -f "$BINARIES_DIR/efi-part/startup.nsh" ]; then
-    cp -f "$BOARD_DIR/grub-efi.cfg" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
-else
-    cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"
+cp -f "$BOARD_DIR/grub-bios.cfg" "$TARGET_DIR/boot/grub/grub.cfg"

-    # Copy grub 1st stage to binaries, required for genimage
-    cp -f "$HOST_DIR/lib/grub/i386-pc/boot.img" "$BINARIES_DIR"
-fi
+# Copy grub 1st stage to binaries, required for genimage
+cp -f "$HOST_DIR/lib/grub/i386-pc/boot.img" "$BINARIES_DIR"
--- a/board/pc/post-image-efi-gpt.sh
+++ b/board/pc/post-image-efi-gpt.sh
@@ -0,0 +1,62 @@
+#!/bin/sh
+
+set -e
+
+cd ${BINARIES_DIR}
+
+# GPT partition type UUIDs
+esp_type=c12a7328-f81f-11d2-ba4b-00a0c93ec93b
+linux_type=44479540-f297-41b2-9af7-d131d5f0458a
+
+# Partition UUIDs
+efi_part_uuid=$(uuidgen)
+root_part_uuid=$(uuidgen)
+
+# Boot partition offset and size, in 512-byte sectors
+efi_part_start=64
+efi_part_size=32768
+
+# Rootfs partition offset and size, in 512-byte sectors
+root_part_start=$(( efi_part_start + efi_part_size ))
+root_part_size=$(( $(stat -c %s rootfs.ext2) / 512 ))
+
+first_lba=34
+last_lba=$(( root_part_start + root_part_size ))
+
+# Disk image size in 512-byte sectors
+image_size=$(( last_lba + first_lba ))
+
+cat > efi-part/EFI/BOOT/grub.cfg <<EOF
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=PARTUUID=$root_part_uuid rootwait console=tty1
+}
+EOF
+
+# Create EFI system partition
+rm -f efi-part.vfat
+dd if=/dev/zero of=efi-part.vfat bs=512 count=0 seek=$efi_part_size
+mkdosfs  efi-part.vfat
+mcopy -bsp -i efi-part.vfat efi-part/startup.nsh ::startup.nsh
+mcopy -bsp -i efi-part.vfat efi-part/EFI ::EFI
+mcopy -bsp -i efi-part.vfat bzImage ::bzImage
+
+rm -f disk.img
+dd if=/dev/zero of=disk.img bs=512 count=0 seek=$image_size
+
+sfdisk disk.img <<EOF
+label: gpt
+label-id: $(uuidgen)
+device: /dev/foobar0
+unit: sectors
+first-lba: $first_lba
+last-lba: $last_lba
+
+/dev/foobar0p1 : start=$efi_part_start,  size=$efi_part_size,  type=$esp_type,   uuid=$efi_part_uuid,  name="efi-part.vfat"
+/dev/foobar0p2 : start=$root_part_start, size=$root_part_size, type=$linux_type, uuid=$root_part_uuid, name="rootfs.ext2"
+EOF
+
+dd if=efi-part.vfat of=disk.img bs=512 count=$efi_part_size seek=$efi_part_start conv=notrunc
+dd if=rootfs.ext2   of=disk.img bs=512 count=$root_part_size seek=$root_part_start conv=notrunc
--- a/board/pc/post-image-efi.sh
+++ b/board/pc/post-image-efi.sh
@@ -1,8 +0,0 @@
-#!/bin/sh
-
-set -e
-
-UUID=$(dumpe2fs "$BINARIES_DIR/rootfs.ext2" 2>/dev/null | sed -n 's/^Filesystem UUID: *\(.*\)/\1/p')
-sed -i "s/UUID_TMP/$UUID/g" "$BINARIES_DIR/efi-part/EFI/BOOT/grub.cfg"
-sed "s/UUID_TMP/$UUID/g" board/pc/genimage-efi.cfg > "$BINARIES_DIR/genimage-efi.cfg"
-support/scripts/genimage.sh -c "$BINARIES_DIR/genimage-efi.cfg"
--- a/board/qemu/aarch64-virt/readme.txt
+++ b/board/qemu/aarch64-virt/readme.txt
@@ -1,5 +1,7 @@
 Run the emulation with:

-  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0 # qemu_aarch64_virt_defconfig
+  qemu-system-aarch64 -M virt -cpu cortex-a53 -nographic -smp 1 -kernel output/images/Image -append "rootwait root=/dev/vda console=ttyAMA0" -netdev user,id=eth0 -device virtio-net-device,netdev=eth0 -drive file=output/images/rootfs.ext4,if=none,format=raw,id=hd0 -device virtio-blk-device,drive=hd0

 The login prompt will appear in the terminal that started Qemu.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/arm-versatile/readme.txt
+++ b/board/qemu/arm-versatile/readme.txt
@@ -1,10 +1,12 @@
 Run the emulation with:

-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user # qemu_arm_versatile_defconfig
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -drive file=output/images/rootfs.ext2,if=scsi,format=raw -append "rootwait root=/dev/sda console=ttyAMA0,115200" -serial stdio -net nic,model=rtl8139 -net user

 Or for the noMMU emulation:

-  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111 # qemu_arm_versatile_nommu_defconfig
+  qemu-system-arm -M versatilepb -kernel output/images/zImage -dtb output/images/versatile-pb.dtb -append "console=ttyAMA0,115200" -serial stdio -net user -net nic,model=smc91c111

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.
+
+Tested with QEMU 2.12.0
--- a/board/qemu/arm-vexpress-tz/linux.fragment
+++ b/board/qemu/arm-vexpress-tz/linux.fragment
@@ -1,3 +0,0 @@
-### Enable OP-TEE
-CONFIG_TEE=y
-CONFIG_OPTEE=y
--- a/board/qemu/arm-vexpress-tz/post-build.sh
+++ b/board/qemu/arm-vexpress-tz/post-build.sh
@@ -1,10 +0,0 @@
-#!/bin/sh
-
-set -u
-set -e
-
-# Rename boot images for the dear TF-A
-ln -sf u-boot.bin ${BINARIES_DIR}/bl33.bin
-ln -sf tee-header_v2.bin ${BINARIES_DIR}/bl32.bin
-ln -sf tee-pager_v2.bin ${BINARIES_DIR}/bl32_extra1.bin
-ln -sf tee-pageable_v2.bin ${BINARIES_DIR}/bl32_extra2.bin
--- a/board/qemu/arm-vexpress-tz/readme.txt
+++ b/board/qemu/arm-vexpress-tz/readme.txt
@@ -1,136 +0,0 @@
-Board qemu_arm_vexpress_tz builds a QEMU ARMv7-A target system with
-OP-TEE running in the TrustZone secure world and a Linux based
-OS running in the non-secure world. The board configuration enables
-builds of the QEMU host ARM target emulator.
-
-  make qemu_arm_vexpress_tz_defconfig
-  make
-
-The BIOS used in the QEMU host is the ARM Trusted Firmware-A (TF-A). TF-A
-uses QEMU semihosting file access to access boot image files. The
-QEMU platform is quite specific for that in TF-A and one needs to
-run the emulation from the image directory for TF-A to boot the
-secure and non-secure worlds.
-
-  cd output/images && ../host/bin/qemu-system-arm \
-	-machine virt -machine secure=on -cpu cortex-a15 \
-	-smp 1 -s -m 1024 -d unimp \
-	-serial stdio \
-	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable,target=native \
-	-bios bl1.bin
-
-The boot stage traces (if any) followed by the login prompt will appear
-in the terminal that started QEMU.
-
-If you want to emulate more cores, use "-smp {1|2|3|4}" to select the
-number of cores.
-
-Note: "-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic"
-brings network support that is used i.e. in OP-TEE regression tests.
-
-
-- Boot Details --
-
-TF-A is used as QEMU BIOS. Its BL1 image boots and load its BL2 image. In turn,
-this image loads the OP-TEE secure world (ARMv7-A BL32 stage) and the U-boot as
-non-secure bootloader (BL33 stage).
-
-QEMU natively hosts and loads in RAM the QEMU ARM target device tree. OP-TEE
-reads and modifies its content according to OP-TEE configuration.
-
-Enable TF-A traces from LOG_LEVEL (I.e LOG_LEVEL=40) from
-BR2_TARGET_ARM_TRUSTED_FIRMWARE_ADDITIONAL_VARIABLES.
-
-
-- OP-TEE Traces --
-
-Secure boot stages and/or secure runtime services may use a serial link for
-their traces.
-
-The ARM Trusted Firmware outputs its traces on the QEMU standard (first)
-serial interface.
-
-The OP-TEE OS uses the QEMU second serial interface.
-
-To get the OP-TEE OS traces, append a second -serial argument after
-serial stdio in the QEMU command line. I.e, the following enables 2 serial
-consoles over telnet connections:
-
-  cd output/images && ../host/bin/qemu-system-arm \
-	-machine virt -machine secure=on -cpu cortex-a15 \
-	-smp 1 -s -m 1024 -d unimp \
-	-serial telnet:127.0.0.1:1235,server \
-	-serial telnet:127.0.0.1:1236,server \
-	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable,target=native \
-	-bios bl1.bin
-
-QEMU is now waiting for the telnet connection. From another shell, open a
-telnet connection on the port for the U-boot and Linux consoles:
-
-  telnet 127.0.0.1 1235
-
-and again for the secure console
-
-  telnet 127.0.0.1 1236
-
-
-- Using gdb --
-
-One can debug the OP-TEE secure world using GDB through the QEMU host.
-To do so, simply run the qemu-system-arm emulation, then run a GDB client
-and connect the QEMU internal GDB server.
-
-The example below assumes we run QEMU and the GDB client from the same
-host computer. We use option -S of qemu-system-arm to make QEMU
-waiting for the GDB continue instruction before booting the images.
-
-From a first shell:
-  cd output/images && ../host/bin/qemu-system-arm \
-	-machine virt -machine secure=on -cpu cortex-a15 \
-	-smp 1 -s -m 1024 -d unimp \
-	-serial stdio \
-	-netdev user,id=vmnic -device virtio-net-device,netdev=vmnic \
-	-semihosting-config enable,target=native \
-	-bios bl1.bin \
-	-S
-
-From a second shell:
-  ./output/host/bin/arm-linux-gdb
-  GNU gdb (GNU Toolchain for the A-profile Architecture 8.2-2018-08 (arm-rel-8.23)) 8.1.1.20180704-git
-  Copyright (C) 2018 Free Software Foundation, Inc.
-  ...
-  For help, type "help".
-  Type "apropos word" to search for commands related to "word".
-  (gdb)
-
-From this GDB console, connect to the target, load the OP-TEE core symbols,
-set a breakpoint to its entry point (__text_start) and start emulation:
-
-  (gdb) target remote 127.0.0.1:1234
-  (gdb) symbol-file ./output/build/optee-os-<reference>/out/arm/core/tee.elf
-  (gdb) hbreak __text_start
-  Hardware assisted breakpoint 1 at 0xe100000: file core/arch/arm/kernel/generic_entry_a32.S, line 246.
-  (gdb) cont
-  Continuing.
-
-  Thread 1 hit Breakpoint 1, _start () at core/arch/arm/kernel/generic_entry_a32.S:246
-  246		bootargs_entry
-  (gdb)
-
-
-Emulation has started, TF-A has loaded OP-TEE and U-boot images in memory and
-has booted OP-TEE. Emulation stopped at OP-TEE core entry.
-
-Note: QEMU hosts a GDB service listening to TCP port 1234, as set through
-qemu-system-arm command line option -s.
-
-Note: To build the GDB server, the following extra options have to be added to
-the Buildroot configuration:
-
-    BR2_ENABLE_DEBUG=y
-    BR2_PACKAGE_GDB=y
-    BR2_PACKAGE_HOST_GDB=y
-    BR2_TOOLCHAIN_BUILDROOT_CXX=y
-    BR2_TOOLCHAIN_BUILDROOT_GLIBC=y
--- a/board/qemu/arm-vexpress-tz/u-boot.config
+++ b/board/qemu/arm-vexpress-tz/u-boot.config
@@ -1,7 +0,0 @@
-CONFIG_SYS_TEXT_BASE=0x60000000
-CONFIG_BOOTCOMMAND="fdt addr ${fdt_addr} && fdt resize 1000 && smhload zImage ${kernel_addr_r} && smhload rootfs.cpio.gz ${ramdisk_addr_r} ramdisk_addr_end &&  setenv bootargs console=ttyAMA0,115200 earlyprintk=serial,ttyAMA0,115200 && fdt chosen ${ramdisk_addr_r} ${ramdisk_addr_end} && bootz ${kernel_addr_r} - ${fdt_addr}"
-CONFIG_SEMIHOSTING=y
-# Drop flash accesses
-CONFIG_ENV_IS_IN_FLASH=n
-CONFIG_MTD=n
-CONFIG_MTD_NOR_FLASH=n
--- a/board/qemu/arm-vexpress/readme.txt
+++ b/board/qemu/arm-vexpress/readme.txt
@@ -1,9 +1,11 @@
 Run the emulation with:

-  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user # qemu_arm_vexpress_defconfig
+  qemu-system-arm -M vexpress-a9 -smp 1 -m 256 -kernel output/images/zImage -dtb output/images/vexpress-v2p-ca9.dtb -drive file=output/images/rootfs.ext2,if=sd,format=raw -append "console=ttyAMA0,115200 rootwait root=/dev/mmcblk0" -serial stdio -net nic,model=lan9118 -net user

 The login prompt will appear in the terminal that started Qemu. The
 graphical window is the framebuffer.

 If you want to emulate more cores change "-smp 1" to "-smp 2" for
 dual-core or even "smp -4" for a quad-core configuration.
+
+Tested with QEMU 2.12.0
--- a/Show More
+++ b/Show More