Update for 2017.02.2

Signed-off-by: Peter Korsgaard <peter@korsgaard.com>

.gitlab-ci.yml

@@ -1,197 +0,0 @@
-# Configuration for Gitlab-CI.
-# Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
-# The .gitlab-ci.yml file is generated from .gitlab-ci.yml.in.
-# It needs to be regenerated every time a defconfig is added, using
-# "make .gitlab-ci.yml".
-
-image: debian:stable
-
-before_script:
-    - dpkg --add-architecture i386
-    # The container has no package lists, so need to update first
-    - apt-get update -qq
-    - apt-get install -y -qq --no-install-recommends
-        build-essential locales bc ca-certificates file rsync gcc-multilib
-        git bzr cvs mercurial subversion libc6:i386 unzip wget cpio
-    # To be able to generate a toolchain with locales, enable one UTF-8 locale
-    - sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen
-    - /usr/sbin/locale-gen
-
-.defconfig_script: &defconfig_script
-    - echo 'Configure Buildroot'
-    - make ${CI_BUILD_NAME}
-    - echo 'Build buildroot'
-    - |
-        make > >(tee build.log |grep '>>>') 2>&1 || {
-            echo 'Failed build last output'
-            tail -200 build.log
-            exit 1
-        }
-
-check-gitlab-ci.yml:
-    script:
-        - mv .gitlab-ci.yml .gitlab-ci.yml.orig
-        - make .gitlab-ci.yml
-        - diff -u .gitlab-ci.yml.orig .gitlab-ci.yml
-
-.defconfig: &defconfig
-    # Running the defconfigs for every push is too much, so limit to
-    # explicit triggers through the API.
-    only:
-        - triggers
-        - tags
-    script: *defconfig_script
-    artifacts:
-        when: always
-        expire_in: 2 weeks
-        paths:
-            - build.log
-            - output/images/
-            - output/build/build-time.log
-            - output/build/packages-file-list.txt
-
-acmesystems_aria_g25_128mb_defconfig: *defconfig
-acmesystems_aria_g25_256mb_defconfig: *defconfig
-acmesystems_arietta_g25_128mb_defconfig: *defconfig
-acmesystems_arietta_g25_256mb_defconfig: *defconfig
-arcturus_ucp1020_defconfig: *defconfig
-arm_foundationv8_defconfig: *defconfig
-arm_juno_defconfig: *defconfig
-armadeus_apf27_defconfig: *defconfig
-armadeus_apf28_defconfig: *defconfig
-armadeus_apf51_defconfig: *defconfig
-armadeus_apf9328_defconfig: *defconfig
-at91sam9260eknf_defconfig: *defconfig
-at91sam9g20dfc_defconfig: *defconfig
-at91sam9g45m10ek_defconfig: *defconfig
-at91sam9rlek_defconfig: *defconfig
-at91sam9x5ek_defconfig: *defconfig
-at91sam9x5ek_dev_defconfig: *defconfig
-at91sam9x5ek_mmc_defconfig: *defconfig
-at91sam9x5ek_mmc_dev_defconfig: *defconfig
-atmel_sama5d2_xplained_mmc_defconfig: *defconfig
-atmel_sama5d2_xplained_mmc_dev_defconfig: *defconfig
-atmel_sama5d3_xplained_defconfig: *defconfig
-atmel_sama5d3_xplained_dev_defconfig: *defconfig
-atmel_sama5d3_xplained_mmc_defconfig: *defconfig
-atmel_sama5d3_xplained_mmc_dev_defconfig: *defconfig
-atmel_sama5d3xek_defconfig: *defconfig
-atmel_sama5d4_xplained_defconfig: *defconfig
-atmel_sama5d4_xplained_dev_defconfig: *defconfig
-atmel_sama5d4_xplained_mmc_defconfig: *defconfig
-atmel_sama5d4_xplained_mmc_dev_defconfig: *defconfig
-bananapro_defconfig: *defconfig
-beagleboardx15_defconfig: *defconfig
-beaglebone_defconfig: *defconfig
-beaglebone_qt5_defconfig: *defconfig
-chromebook_snow_defconfig: *defconfig
-ci20_defconfig: *defconfig
-ci40_defconfig: *defconfig
-csky_gx6605s_defconfig: *defconfig
-cubieboard2_defconfig: *defconfig
-firefly_rk3288_defconfig: *defconfig
-firefly_rk3288_demo_defconfig: *defconfig
-freescale_imx28evk_defconfig: *defconfig
-freescale_imx31_3stack_defconfig: *defconfig
-freescale_imx6dlsabreauto_defconfig: *defconfig
-freescale_imx6dlsabresd_defconfig: *defconfig
-freescale_imx6qsabreauto_defconfig: *defconfig
-freescale_imx6qsabresd_defconfig: *defconfig
-freescale_imx6sololiteevk_defconfig: *defconfig
-freescale_imx6sxsabresd_defconfig: *defconfig
-freescale_imx6ulevk_defconfig: *defconfig
-freescale_imx7dsabresd_defconfig: *defconfig
-freescale_mpc8315erdb_defconfig: *defconfig
-freescale_p1010rdb_pa_defconfig: *defconfig
-galileo_defconfig: *defconfig
-gdb_bfin_bf512_defconfig: *defconfig
-grinn_chiliboard_defconfig: *defconfig
-grinn_liteboard_defconfig: *defconfig
-imx23evk_defconfig: *defconfig
-imx6q-sabresd_defconfig: *defconfig
-imx6ulpico_defconfig: *defconfig
-lego_ev3_defconfig: *defconfig
-linksprite_pcduino_defconfig: *defconfig
-minnowboard_max-graphical_defconfig: *defconfig
-minnowboard_max_defconfig: *defconfig
-mx25pdk_defconfig: *defconfig
-mx51evk_defconfig: *defconfig
-mx53loco_defconfig: *defconfig
-mx6cubox_defconfig: *defconfig
-mx6sx_udoo_neo_defconfig: *defconfig
-mx6udoo_defconfig: *defconfig
-nanopi_neo_defconfig: *defconfig
-nexbox_a95x_defconfig: *defconfig
-nitrogen6sx_defconfig: *defconfig
-nitrogen6x_defconfig: *defconfig
-nitrogen7_defconfig: *defconfig
-odroidc2_defconfig: *defconfig
-olimex_a20_olinuxino_lime2_defconfig: *defconfig
-olimex_a20_olinuxino_lime_defconfig: *defconfig
-olimex_a20_olinuxino_lime_mali_defconfig: *defconfig
-olimex_a20_olinuxino_micro_defconfig: *defconfig
-olimex_imx233_olinuxino_defconfig: *defconfig
-openblocks_a6_defconfig: *defconfig
-orangepi_one_defconfig: *defconfig
-orangepi_pc_defconfig: *defconfig
-pandaboard_defconfig: *defconfig
-pc_x86_64_bios_defconfig: *defconfig
-pc_x86_64_efi_defconfig: *defconfig
-qemu_aarch64_virt_defconfig: *defconfig
-qemu_arm_versatile_defconfig: *defconfig
-qemu_arm_versatile_nommu_defconfig: *defconfig
-qemu_arm_vexpress_defconfig: *defconfig
-qemu_m68k_mcf5208_defconfig: *defconfig
-qemu_m68k_q800_defconfig: *defconfig
-qemu_microblazebe_mmu_defconfig: *defconfig
-qemu_microblazeel_mmu_defconfig: *defconfig
-qemu_mips32r2_malta_defconfig: *defconfig
-qemu_mips32r2el_malta_defconfig: *defconfig
-qemu_mips32r6_malta_defconfig: *defconfig
-qemu_mips32r6el_malta_defconfig: *defconfig
-qemu_mips64_malta_defconfig: *defconfig
-qemu_mips64el_malta_defconfig: *defconfig
-qemu_mips64r6_malta_defconfig: *defconfig
-qemu_mips64r6el_malta_defconfig: *defconfig
-qemu_nios2_10m50_defconfig: *defconfig
-qemu_or1k_defconfig: *defconfig
-qemu_ppc64_pseries_defconfig: *defconfig
-qemu_ppc_g3beige_defconfig: *defconfig
-qemu_ppc_mpc8544ds_defconfig: *defconfig
-qemu_ppc_virtex_ml507_defconfig: *defconfig
-qemu_sh4_r2d_defconfig: *defconfig
-qemu_sh4eb_r2d_defconfig: *defconfig
-qemu_sparc64_sun4u_defconfig: *defconfig
-qemu_sparc_ss10_defconfig: *defconfig
-qemu_x86_64_defconfig: *defconfig
-qemu_x86_defconfig: *defconfig
-qemu_xtensa_lx60_defconfig: *defconfig
-qemu_xtensa_lx60_nommu_defconfig: *defconfig
-raspberrypi0_defconfig: *defconfig
-raspberrypi2_defconfig: *defconfig
-raspberrypi3_64_defconfig: *defconfig
-raspberrypi3_defconfig: *defconfig
-raspberrypi_defconfig: *defconfig
-riotboard_defconfig: *defconfig
-roseapplepi_defconfig: *defconfig
-s6lx9_microboard_defconfig: *defconfig
-sheevaplug_defconfig: *defconfig
-snps_aarch64_vdk_defconfig: *defconfig
-snps_arc700_axs101_defconfig: *defconfig
-snps_archs38_axs103_defconfig: *defconfig
-snps_archs38_haps_defconfig: *defconfig
-snps_archs38_vdk_defconfig: *defconfig
-stm32f429_disco_defconfig: *defconfig
-stm32f469_disco_defconfig: *defconfig
-telit_evk_pro3_defconfig: *defconfig
-toradex_apalis_imx6_defconfig: *defconfig
-ts4800_defconfig: *defconfig
-ts4900_defconfig: *defconfig
-ts5x00_defconfig: *defconfig
-wandboard_defconfig: *defconfig
-warp7_defconfig: *defconfig
-warpboard_defconfig: *defconfig
-zynq_microzed_defconfig: *defconfig
-zynq_zc706_defconfig: *defconfig
-zynq_zed_defconfig: *defconfig
-zynq_zybo_defconfig: *defconfig

.gitlab-ci.yml.in

@@ -1,52 +0,0 @@
-# Configuration for Gitlab-CI.
-# Builds appear on https://gitlab.com/buildroot.org/buildroot/pipelines
-# The .gitlab-ci.yml file is generated from .gitlab-ci.yml.in.
-# It needs to be regenerated every time a defconfig is added, using
-# "make .gitlab-ci.yml".
-
-image: debian:stable
-
-before_script:
-    - dpkg --add-architecture i386
-    # The container has no package lists, so need to update first
-    - apt-get update -qq
-    - apt-get install -y -qq --no-install-recommends
-        build-essential locales bc ca-certificates file rsync gcc-multilib
-        git bzr cvs mercurial subversion libc6:i386 unzip wget cpio
-    # To be able to generate a toolchain with locales, enable one UTF-8 locale
-    - sed -i 's/# \(en_US.UTF-8\)/\1/' /etc/locale.gen
-    - /usr/sbin/locale-gen
-
-.defconfig_script: &defconfig_script
-    - echo 'Configure Buildroot'
-    - make ${CI_BUILD_NAME}
-    - echo 'Build buildroot'
-    - |
-        make > >(tee build.log |grep '>>>') 2>&1 || {
-            echo 'Failed build last output'
-            tail -200 build.log
-            exit 1
-        }
-
-check-gitlab-ci.yml:
-    script:
-        - mv .gitlab-ci.yml .gitlab-ci.yml.orig
-        - make .gitlab-ci.yml
-        - diff -u .gitlab-ci.yml.orig .gitlab-ci.yml
-
-.defconfig: &defconfig
-    # Running the defconfigs for every push is too much, so limit to
-    # explicit triggers through the API.
-    only:
-        - triggers
-        - tags
-    script: *defconfig_script
-    artifacts:
-        when: always
-        expire_in: 2 weeks
-        paths:
-            - build.log
-            - output/images/
-            - output/build/build-time.log
-            - output/build/packages-file-list.txt
-

CHANGES

@@ -1,209 +1,3 @@
-2017.05, Released May 31st, 2017
-
-	Minor fixes.
-
-	External toolchain: musl dynamic linker symlink for mips-sf
-	corrected.
-
-	Updated/fixed packages: agentpp, bash, exim, hans, madplay,
-	qpid-proton, rtl8188eu, snmppp, stm32flash, strongswan, sudo,
-	xen
-
-	Issues resolved (http://bugs.buildroot.org):
-
-	#9906: genimage: Disk full
-
-2017.05-rc3, Released May 30th, 2017
-
-	Fixes all over the tree.
-
-	ARC toolchain bumped to 2017.03
-
-	Runtime testing improvements and cleanups.
-
-	Updated/fixed packages: acpica, armadillo, audiofile, c-icap,
-	cppcms, dhcp, docker-engine, dropbear, elfutils, erlang,
-	fbgrab, ffmpeg, flashrom, ftop, gnutls, google-breakpad,
-	keepalived, kodi, libcdio, libepoxy, libev, libminiupnpc,
-	libqmi, libtasn1, libv4l, mariadb, mono, mosh, mosquitto,
-	mxml, ntp, opencv, openpowerlink, oracle-mysql, popt,
-	pulseview, python-enum34, rabbitmq-c, redis, samba4, stella,
-	xen
-
-	Removed packages: firejail, ola
-
-	Issues resolved (http://bugs.buildroot.org):
-
-	#9871: fbgrab 1.3 won't build with BR2_REPRODUCIBLE set
-	#9876: aarch64 support with gcc 4.8 toolchain
-	#9896: host-gcc-initial error downloading because incorrect URL
-
-2017.05-rc2, Released May 17th, 2017
-
-	Fixes all over the tree.
-
-	ARC toolchain bumped to 2017.03-rc2
-
-	Updated/fixed packages: bluez_utils, boost, clamav, daemon,
-	efibootmgr, efl, espeak, expedite, faketime, ffmpeg, fxload,
-	git, gpsd, kvm-unit-tests, libcdio, libv4l, lua, mke2img,
-	mpir, mpv, odroid-scripts, openblas, opencv3, openvpn, php,
-	postgresql, protobuf, qt5declarative, qwt, radvd, rpcbind,
-	rtmpdump, strongswan, sudo, ltp-testsuite, uclibc-ng-test,
-	vlc, x11vnc, xfsprogs
-
-	Issues resolved (http://bugs.buildroot.org):
-
-	#9796: source-check broken for Git downloads
-	#9866: BASE_DIR usage
-
-2017.05-rc1, Released May 8th, 2017
-
-	Fixes all over the tree and new features.
-
-	Infrastructure:
-
-	- Installed binaries are now checked for correct architecture
-	  to catch natively built binaries or binaries built for other
-	  architecture variants.
-
-	- Luarocks infrastructure improvements to extraction handling,
-	  support for upstream name != Buildroot package name.
-
-	- 'make printvars' output format has changed to make it easier
-	  to use in scripts. It now has options to quote the variables
-	  and to show the expanded/unexpanded values.
-
-	- Automatic ext2 rootfs size calculation has been removed. The
-	  logic was not working working reliable in all setups as it
-	  depends on the host filesystem behaviour, so instead now the
-	  size has to be specified explicitly (defaults to 60MB).
-
-	- The git download infrastructure now ensures that GNU format
-	  tar files are created.
-
-	- Fixed a variable clashing issue in the mkusers script with
-	  internal bash variables.
-
-	- Fakeroot now links against libacl to fix issues on
-	  distributions using acls.
-
-	- Correct permissions for /dev/pts/ptmx when systemd is used
-	  with recent glibc versions.
-
-	- br2-external: Improve error reporting.
-
-	- A wrapper script for genimage has been added in
-	  support/scripts/genimage.sh for easy use of genimage from
-	  post-image scripts.
-
-	- A script to check for common style issues in new packages
-	  before submitting has been added in support/scripts/check-package
-
-	- Defconfigs are now tested by gitlab-CI instead of Travis:
-	  https://gitlab.com/buildroot.org/buildroot
-
-	- Infrastructure for runtime testing has been added to
-          support/testing
-
-	Toolchain:
-
-	- External linaro toolchains updated to 2017.02, ARC toolchain
-          updated to 2017.03-rc1, NIOSII CodeSourcery to 2017.05
-
-	- A number of fixes and improvements to the external toolchain
-	  handling, including C library detection, multilib and ld.so
-	  handling
-
-	- Glibc 2.25 and uClibc-ng 1.0.24 added, wordexp support enabled
-          for uClibc-ng
-
-	- Binutils 2.28 added and default changed to 2.27
-
-
-	Architectures:
-
-	- Support for the C-SKY architecture has been added.
-
-
-	License handling:
-
-	- The package license markings for legal info now uses the
-	  SPDX short identifiers for the license string where possible.
-
-	- License info has been improved / added for a number of packages.
-
-
-	Misc:
-
-	- Cmake 3.7.x installed on the host is no longer ignored as a
-          workaround for the RPATH issues has been implemented.
-
-	- Docker-engine can now be built statically on an otherwise
-	  dynamic linked build for docker-in-docker setups.
-
-	- U-Boot now supports out-of-tree device trees, similar to
-          Linux
-
-	- Nodejs 0.10.x support (and with it, support for <ARMv6) has
-          been removed as this is now EOL upstream.
-
-	New defconfigs: AT91sam9x5ek dev/mmc/mmc-dev, banana pro,
-	Nationalchip gx6605s, MIPS creator ci40, nexbox a95x, 64bit
-	defconfig for raspberry pi 3, stm32f429-disc1.
-
-	The raspberry pi zero-w and rpi3 compute module are now also
-	supported by the rpi0 / rpi3 defconfigs, beaglebone green is
-	supported by the beaglebone defconfig.
-
-	Removed defconfig: minnowboard, via imx6 vab820, altera
-	socdk/sockit
-
-	New packages: arp-scan, atest, augeas, bluez-tools, daemon,
-	dc3dd, dieharder, execline, fmt, ghostscript, gqrx,
-	gst1-vaapi, jo, keepalived, kmscube, kodi-jsonschemabuilder,
-	kodi-skin-confluence, kodi-texturepacker, lensfun, leptonica,
-	libbson, libcsv, libgphoto2, libkcapi, libmaxminddb,
-	libmediaart, libnpth, libscrypt, lua-bit32, lua-resty-http,
-	lugaru, memtool, mpir, nanomsg, physfs, phytool, pngquant,
-	python-decorator, python-simplegeneric,
-	python-sortedcontainers, rpi-bt-firmware, rpi-wifi-firmware,
-	s6, s6-dns, s6-linux-init, s6-linux-utils, s6-networking,
-	s6-portable-utils, s6-rc, supertux, tesseract-ocr,
-	uccp420wlan, wilink-bt-firmware
-
-	Broken packages: ola
-
-	Removed packages: cosmo, kodi-visualisation-fountain,
-	polarssl, portmap, xdriver_xf86-video-glide,
-	xdriver_xf86-video-v4l, xdriver_xf86-video-wsfb
-
-	Issues resolved (http://bugs.buildroot.org):
-
-	#8831: image generation fails on host ZFS due to "no free space"
-	#9436: e2fsprogs remove busybox applets even of unselected e2fs..
-	#9456: mkusers script bash errors
-	#9496: mke2img fails during build on ntfs-3g host partition
-	#9531: NPM fails to build embedded modules
-	#9596: KODI: --enable-lirc needs "HAVE_LIRC" compiler definition..
-	#9691: Wrong cryptsetup package include files location
-	#9696: Wrong cryptsetup package include files location
-	#9706: Can't download newer revisions of package from PyPI
-	#9711: Recent libCEC version bump seems to break kodi package
-	#9716: exit, shutdown, reboot from kodi
-	#9721: version 2017.02: no acceptable m4 could be found in $PATH
-	#9726: Raspberry Pi version B - Problems with UART speed in..
-	#9751: expat legal info - manifest.csv: GPLv2 Source site: MIT..
-	#9756: glibc fails to build on buildroot-sh4*-buildroot-linux-gnu
-	#9766: support/scripts/pkgutil.py conflicts with the pkgutil.py..
-	#9776: libubox build failed
-	#9791: Python searches for packages in the user site directory
-	#9806: libseccomp is not available when BR2_arm=y
-	#9826: post-build scritp - symlinks created in post-build script..
-	#9836: triggerhappy: systemd unit broken
-	#9846: musl libc not installed correctly in target folder
-	#9856: build libubox failed on ubuntu 17.04 64bit
-
 2017.02.2, Released May 1st, 2017
 
 	Important / security related fixes.
@@ -420,14 +214,6 @@
 	#9576: External tree with BR 2016.11 does not work anymore
 	#9606: xorg-server cannot build for ARM target
 
-2016.11.3, Released March 9th, 2017
-
-	Important / security related fixes.
-
-	Updated/fixed packages: bind, dbus, gnutls, imagemagick,
-	lcms2, libcurl, ntfs-3g, ntp, openssl, php, quagga, redis,
-	squid, stunnel, tcpdump, vim, wavpack, wireshark, xlib_libXpm
-
 2016.11.2, Released January 25th, 2017
 
 	Important / security related fixes.

Config.in.legacy

@@ -142,166 +142,6 @@ comment "build, or run, in unpredictable ways.               "
 comment "----------------------------------------------------"
 endif
 
-###############################################################################
-comment "Legacy options removed in 2017.05"
-
-config BR2_PACKAGE_SUNXI_MALI_R2P4
-	bool "sunxi-mali r2p4 removed"
-	select BR2_LEGACY
-	help
-	  sunxi-mali libMali for r2p4 Mali kernel module has been
-	  removed since the libump package only provides libUMP.so.3.
-	  libMali for r2p4 Mali kernel module requires libUMP.so.2.
-
-config BR2_PACKAGE_NODEJS_MODULES_COFFEESCRIPT
-	bool "CoffeeScript option has been removed"
-	select BR2_LEGACY
-	help
-	  The option to enable NodeJS CoffeeScript has been removed.
-	  To continue using it, add "coffee-script" to
-	  BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL.
-
-config BR2_PACKAGE_NODEJS_MODULES_EXPRESS
-	bool "Express web application framework option has been removed"
-	select BR2_LEGACY
-	help
-	  The option to enable the NodeJS Express web application
-	  framework has been removed. To continue using it, add
-	  "express" to BR2_PACKAGE_NODEJS_MODULES_ADDITIONAL.
-
-config BR2_PACKAGE_BLUEZ5_UTILS_GATTTOOL
-	bool "bluez5_utils gatttool install option removed"
-	select BR2_PACKAGE_BLUEZ5_UTILS_DEPRECATED
-	help
-	  The option to install gatttool specifically has been removed.
-	  Since version 5.44 gatttool is in the list of deprecated
-	  tools. The option to build and install deprecated tools has
-	  been automatically enabled.
-
-config BR2_PACKAGE_OPENOCD_FT2XXX
-	bool "openocd ft2232 support has been removed"
-	select BR2_PACKAGE_OPENOCD_FTDI
-	select BR2_LEGACY
-	help
-	  FT2232 support in OpenOCD has been removed, it's replaced by
-	  FDTI support, which has automatically been enabled.
-
-config BR2_PACKAGE_KODI_RTMPDUMP
-	bool "kodi rtmp has been removed"
-	select BR2_LEGACY
-	help
-	  Internal rtmp support was removed from Kodi.
-
-config BR2_PACKAGE_KODI_VISUALISATION_FOUNTAIN
-	bool "kodi-visualisation-fountain has been removed"
-	select BR2_LEGACY
-	help
-	  According to upstream 'the visualization is not currently
-	  in a working shape.'
-
-config BR2_PACKAGE_PORTMAP
-	bool "portmap has been removed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_RPCBIND
-	help
-	  The portmap upstream tarball is removed, no releases since
-	  ten years and latest change in upstream git in 2014.
-	  You should better use rpcbind as a RPC portmapper.
-
-config BR2_BINUTILS_VERSION_2_25_X
-	bool "binutils version 2.25 support removed"
-	select BR2_LEGACY
-	help
-	  Support for binutils version 2.25 has been removed. The
-	  current default version (2.27 or later) has been selected
-	  instead.
-
-config BR2_TOOLCHAIN_BUILDROOT_INET_RPC
-	bool "uclibc RPC support has been removed"
-	select BR2_LEGACY
-	help
-	  uClibc-ng removed internal RPC implementation in 1.0.23. You
-	  should use libtirpc instead.
-
-config BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS
-	int "extra size in blocks has been removed"
-	default 0
-	help
-	  Since the support for auto calculation of the filesystem size has been
-	  removed, this option is now useless and must be 0.
-	  You may want to check that BR2_TARGET_ROOTFS_EXT2_BLOCKS matchs
-	  your needs.
-
-config BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS_WRAP
-	bool
-	default y if BR2_TARGET_ROOTFS_EXT2_EXTRA_BLOCKS != 0
-	select BR2_LEGACY
-
-config BR2_PACKAGE_SYSTEMD_KDBUS
-	bool "systemd-kdbus has been removed"
-	select BR2_LEGACY
-	help
-	  --enable/disable-kdbus configure option has been removed since
-	  systemd-231.
-
-config BR2_PACKAGE_POLARSSL
-	bool "polarssl has been removed"
-	select BR2_LEGACY
-	help
-	  The polarssl crypto library has been removed since the 1.2.x
-	  release branch is no longer maintained. Newer upstream
-	  branches/releases (mbedtls) have API changes so they're not
-	  drop-in replacements.
-
-config BR2_NBD_CLIENT
-	bool "nbd client option was renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_NBD_CLIENT
-	help
-	  The nbd client option has been renamed to BR2_PACKAGE_NBD_CLIENT.
-
-config BR2_NBD_SERVER
-	bool "nbd server option was renamed"
-	select BR2_LEGACY
-	select BR2_PACKAGE_NBD_SERVER
-	help
-	  The nbd server option has been renamed to BR2_PACKAGE_NBD_SERVER.
-
-config BR2_PACKAGE_GMOCK
-	bool "gmock merged into gtest package"
-	select BR2_LEGACY
-	select BR2_PACKAGE_GTEST
-	select BR2_PACKAGE_GTEST_GMOCK
-	help
-	  GMock is now a suboption of the GTest package.
-
-config BR2_KERNEL_HEADERS_4_8
-	bool "kernel headers version 4.8.x are no longer supported"
-	select BR2_KERNEL_HEADERS_4_4
-	select BR2_LEGACY
-	help
-	  Version 4.8.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 4.4.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_KERNEL_HEADERS_3_18
-	bool "kernel headers version 3.18.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
-	select BR2_LEGACY
-	help
-	  Version 3.18.x of the Linux kernel headers are no longer
-	  maintained upstream and are now removed. As an alternative,
-	  version 3.12.x of the headers have been automatically
-	  selected in your configuration.
-
-config BR2_GLIBC_VERSION_2_22
-	bool "glibc 2.22 removed"
-	select BR2_LEGACY
-	help
-	  Support for glibc version 2.22 has been removed. The current
-	  default version has been selected instead.
-
 ###############################################################################
 comment "Legacy options removed in 2017.02"
 
@@ -572,22 +412,22 @@ config BR2_GCC_VERSION_4_8_ARC
 
 config BR2_KERNEL_HEADERS_4_0
 	bool "kernel headers version 4.0.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
+	select BR2_KERNEL_HEADERS_3_18
 	select BR2_LEGACY
 	help
 	  Version 4.0.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
+	  As an alternative, version 3.18.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_KERNEL_HEADERS_3_19
 	bool "kernel headers version 3.19.x are no longer supported"
-	select BR2_KERNEL_HEADERS_3_12
+	select BR2_KERNEL_HEADERS_3_18
 	select BR2_LEGACY
 	help
 	  Version 3.19.x of the Linux kernel headers have been deprecated
 	  for more than four buildroot releases and are now removed.
-	  As an alternative, version 3.12.x of the headers have been
+	  As an alternative, version 3.18.x of the headers have been
 	  automatically selected in your configuration.
 
 config BR2_PACKAGE_LIBEVAS_GENERIC_LOADERS
@@ -617,14 +457,6 @@ config BR2_LINUX_KERNEL_CUSTOM_LOCAL
 ###############################################################################
 comment "Legacy options removed in 2016.08"
 
-config BR2_PACKAGE_EFL_JP2K
-	bool "libevas jp2k loader has been removed"
-	select BR2_LEGACY
-	help
-	  JP2K support in EFL requires openjpeg 1.x (libopenjpeg1.pc)
-	  while Buildroot only packages openjpeg 2.x. Therefore, the
-	  JP2K loader has been removed from EFL.
-
 config BR2_PACKAGE_SYSTEMD_COMPAT
 	bool "systemd compatibility libraries have been removed"
 	select BR2_LEGACY

DEVELOPERS

@@ -30,17 +30,8 @@ N:	Abhilash Tuse <abhilash.tuse@imgtec.com>
 F:	package/gstreamer1/gst1-rtsp-server/
 
 N:	Adam Duskett <aduskett@gmail.com>
-F:	package/audit/
-F:	package/checkpolicy/
-F:	package/gstreamer1/gst1-vaapi/
-F:	package/libselinux/
-F:	package/libsemanage/
-F:	package/libsepol/
 F:	package/nginx-naxsi/
-F:	package/policycoreutils/
 F:	package/python-mutagen/
-F:	package/sepolgen/
-F:	package/setools/
 F:	package/sngrep/
 
 N:	Alex Suykov <alex.suykov@gmail.com>
@@ -79,9 +70,8 @@ F:	package/openal/
 F:	package/p7zip/
 F:	package/wine/
 
-N:	Andrey Smirnov <andrew.smirnov@gmail.com
-F:	package/python-decorator/
-F:	package/python-simplegeneric/
+N:	Andrew Ruder <andrew.ruder@elecsyscorp.com>
+F:	package/expect/
 
 N:	Andy Kennedy <andy.kennedy@adtran.com>
 F:	package/libunwind/
@@ -113,11 +103,9 @@ N:	Arnaud Aujon <arnaud@intelibre.fr>
 F:	package/espeak/
 
 N:	Arnout Vandecappelle <arnout@mind.be>
-F:	package/arp-scan/
 F:	package/freescale-imx/firmware-imx/
 F:	package/freescale-imx/imx-lib/
 F:	package/gstreamer/gst-fsl-plugins/
-F:	package/lua-bit32/
 F:	package/owfs/
 F:	package/python-bottle/
 F:	package/sqlcipher/
@@ -137,7 +125,7 @@ F:	package/luasec/
 F:	package/lua-ev/
 F:	package/orbit/
 
-N:	Bartosz Golaszewski <brgl@bgdev.pl>
+N:	Bartosz Golaszewski <bgolaszewski@baylibre.com>
 F:	package/autoconf-archive/
 F:	package/doxygen/
 F:	package/libgpiod/
@@ -149,10 +137,8 @@ F:	package/pulseview/
 F:	package/sigrok-cli/
 
 N:	Baruch Siach <baruch@tkos.co.il>
-F:	package/daemon/
 F:	package/ebtables/
 F:	package/openipmi/
-F:	package/ti-uim/
 
 N:	Ben Boeckel <mathstuf@gmail.com>
 F:	package/taskd/
@@ -160,17 +146,10 @@ F:	package/taskd/
 N:	Benjamin Kamath <kamath.ben@gmail.com>
 F:	package/lapack/
 
-N:	Benoît Allard <benoit.allard@greenbone.net>
-F:	boot/syslinux/
-F:	package/dc3dd/
-
 N:	Bernd Kuhls <bernd.kuhls@t-online.de>
-F:	package/alsa-lib/
-F:	package/alsa-utils/
 F:	package/apache/
 F:	package/apr/
 F:	package/apr-util/
-F:	package/bluez-tools/
 F:	package/clamav/
 F:	package/dovecot/
 F:	package/dovecot-pigeonhole/
@@ -180,7 +159,6 @@ F:	package/exim/
 F:	package/fetchmail/
 F:	package/freeswitch/
 F:	package/ffmpeg/
-F:	package/ghostscript/
 F:	package/giflib/
 F:	package/glmark2/
 F:	package/jsoncpp/
@@ -215,7 +193,6 @@ F:	package/libldns/
 F:	package/libmicrohttpd/
 F:	package/libminiupnpc/
 F:	package/libnatpmp/
-F:	package/libnpth/
 F:	package/libogg/
 F:	package/libopenh264/
 F:	package/libpciaccess/
@@ -262,7 +239,6 @@ F:	package/perl-timedate/
 F:	package/perl-uri/
 F:	package/perl-www-robotrules/
 F:	package/pixman/
-F:	package/pngquant/
 F:	package/pound/
 F:	package/pure-ftpd/
 F:	package/python-couchdb/
@@ -310,6 +286,7 @@ N:	Carlo Caione <carlo.caione@gmail.com>
 F:	package/sunxi-boards/
 
 N:	Carlos Santos <casantos@datacom.ind.br>
+F:	package/gmock/
 F:	package/gtest/
 F:	package/libpam-radius-auth/
 F:	package/libpam-tacplus/
@@ -328,9 +305,6 @@ F:	package/micropython/
 F:	package/micropython-lib/
 F:	package/syslog-ng/
 
-N:	Christian Kellermann <christian.kellermann@solectrix.de>
-F:	package/python-pylibftdi/
-
 N:	Christian Stewart <christian@paral.in>
 F:	linux/linux-ext-aufs.mk
 F:	package/aufs/
@@ -401,6 +375,9 @@ F:	package/lua-cjson/
 F:	package/luaexpat/
 F:	package/xinetd/
 
+N:	Dave Skok <blanco.ether@gmail.com>
+F:	package/ola/
+
 N:	David Bachelart <david.bachelart@bbright.com>
 F:	package/ccrypt/
 F:	package/dos2unix/
@@ -419,9 +396,6 @@ F:	package/openldap/
 N:	David du Colombier <0intro@gmail.com>
 F:	package/x264/
 
-N:	David Graziano <david.graziano@rockwellcollins.com>
-F:	package/libcsv/
-
 N:	David Lechner <david@lechnology.com>
 F:	board/lego/ev3/
 F:	configs/lego_ev3_defconfig
@@ -456,17 +430,9 @@ N:	Eric Le Bihan <eric.le.bihan.dev@free.fr>
 F:	package/adwaita-icon-theme/
 F:	package/darkhttpd/
 F:	package/eudev/
-F:	package/execline/
 F:	package/hicolor-icon-theme/
 F:	package/jemalloc/
 F:	package/ninja/
-F:	package/s6/
-F:	package/s6-dns/
-F:	package/s6-linux-init/
-F:	package/s6-linux-utils/
-F:	package/s6-networking/
-F:	package/s6-portable-utils/
-F:	package/s6-rc/
 F:	package/skalibs/
 F:	package/smack/
 F:	package/xvisor/
@@ -513,16 +479,12 @@ F:	configs/mx6sx_udoo_neo_defconfig
 F:	configs/mx6udoo_defconfig
 F:	configs/wandboard_defconfig
 F:	configs/warp7_defconfig
-F:	package/atest/
-F:	package/kmscube/
 
 N:	Fabio Porcedda <fabio.porcedda@gmail.com>
 F:	package/netsurf-buildsystem/
 
 N:	Fabrice Fontaine <fabrice.fontaine@orange.com>
 F:	package/domoticz/
-F:	package/libmediaart/
-F:	package/libmaxminddb/
 F:	package/openzwave/
 
 N:	Fabrice Fontaine <fontaine.fabrice@gmail.com>
@@ -535,10 +497,8 @@ F:	package/gssdp/
 F:	package/gupnp/
 F:	package/gupnp-dlna/
 F:	package/gupnp-tools/
-F:	package/hiredis/
 F:	package/igd2-for-linux/
 F:	package/minissdpd/
-F:	package/motion/
 F:	package/tinycbor/
 F:	package/tinydtls/
 
@@ -554,6 +514,7 @@ F:	board/olimex/a20_olinuxino
 F:	configs/olimex_a20_olinuxino_*
 F:	package/4th/
 F:	package/botan/
+F:	package/cosmo/
 F:	package/dado/
 F:	package/ficl/
 F:	package/gdbm/
@@ -610,9 +571,7 @@ N:	Gilles Talis <gilles.talis@gmail.com>
 F:	package/fdk-aac/
 F:	package/httping/
 F:	package/iozone/
-F:	package/leptonica/
 F:	package/ocrad/
-F:	package/tesseract-ocr/
 F:	package/webp/
 
 N:	Gregory Dymarek <gregd72002@gmail.com>
@@ -632,11 +591,6 @@ F:	package/sdl2/
 N:	Guillaume William Brs <guillaume.bressaix@gmail.com>
 F:	package/liquid-dsp/
 
-N:	Guo Ren <ren_guo@c-sky.com>
-F:	arch/Config.in.csky
-F:	board/csky/
-F:	configs/csky_*
-
 N:	Gustavo Zacarias <gustavo@zacarias.com.ar>
 F:	arch/Config.in.powerpc
 F:	board/qemu/
@@ -790,7 +744,6 @@ F:	package/zd1211-firmware/
 
 N:	Gwenhael Goavec-Merou <gwenhael.goavec-merou@trabucayre.com>
 F:	package/gnuradio/
-F:	package/gqrx/
 F:	package/gr-osmosdr/
 F:	package/libusbgx/
 F:	package/python-cheetah/
@@ -812,9 +765,6 @@ F:	package/python-rpi-gpio/
 N:	Ignacy Gawędzki <ignacy.gawedzki@green-communications.fr>
 F:	package/angularjs/
 
-N:	Ilias Apalodimas <apalos@gmail.com>
-F:	package/keepalived/
-
 N:	James Knight <james.knight@rockwellcollins.com>
 F:	package/atkmm/
 F:	package/cairomm/
@@ -922,9 +872,6 @@ F:	package/qt5/
 N:	Julien Floret <julien.floret@6wind.com>
 F:	package/lldpd/
 
-N:	Julien Viard de Galbert <julien@vdg.name>
-F:	package/dieharder/
-
 N:	Justin Maggard <jmaggard@netgear.com>
 F:	package/dtach/
 
@@ -943,9 +890,6 @@ F:	package/x11r7/xdriver_xf86-video-imx/
 F:	package/x11r7/xdriver_xf86-video-imx-viv/
 
 N:	Jörg Krause <joerg.krause@embedded.rocks>
-F:	board/lemaker/bananapro/
-F:	configs/bananapro_defconfig
-F:	package/augeas/
 F:	package/bctoolbox/
 F:	package/libshout/
 F:	package/libupnpp/
@@ -967,9 +911,6 @@ F:	package/cpuload/
 F:	package/bwm-ng/
 F:	package/ramsmp/
 
-N:	Kevin Joly <kevin.joly@sensefly.com>
-F:	package/libgphoto2/
-
 N:	Laurent Cans <laurent.cans@gmail.com>
 F:	package/aircrack-ng/
 
@@ -1037,9 +978,6 @@ F:	package/easydbus/
 F:	package/rs485conf/
 F:	package/turbolua/
 
-N:	Marcin Nowakowski <marcin.nowakowski@imgtec.com>
-F:	package/libkcapi/
-
 N:	Marek Belisko <marek.belisko@open-nandra.com>
 F:	package/libatasmart/
 F:	package/polkit/
@@ -1052,18 +990,12 @@ F:	package/libsecret/
 
 N:	Martin Bark <martin@barkynet.com>
 F:	package/ca-certificates/
-F:	package/nodejs/
 F:	package/tzdata/
 F:	package/zic/
 
 N:	Martin Hicks <mort@bork.org>
 F:	package/cryptsetup/
 
-N:	Martin Kepplinger <martink@posteo.de>
-F:	package/tslib/
-F:	package/x11r7/xdriver_xf86-input-tslib/
-F:	package/x11vnc/
-
 N:	Mathieu Audat <mathieu.audat@savoirfairelinux.com>
 F:	board/technologic/ts4900/
 F:	configs/ts4900_defconfig
@@ -1071,32 +1003,21 @@ F:	package/ts4900-fpga/
 
 N:	Matt Weber <matthew.weber@rockwellcollins.com>
 F:	package/bc/
-F:	package/checkpolicy/
-F:	package/cgroupfs-mount/
 F:	package/eigen/
 F:	package/fmc/
 F:	package/fmlib/
 F:	package/igmpproxy/
 F:	package/iputils/
-F:	package/libcsv/
-F:	package/libselinux/
-F:	package/libsemanage/
-F:	package/libsepol/
-F:	package/libqmi/
-F:	package/nginx-upload/
 F:	package/omniorb/
-F:	package/policycoreutils/
 F:	package/python-ipy/
 F:	package/python-posix-ipc/
 F:	package/python-pypcap/
 F:	package/python-pyrex/
 F:	package/raptor/
-F:	package/sepolgen/
 F:	package/setools/
 F:	package/simicsfs/
 F:	package/smcroute/
 F:	package/tclap/
-F:	package/valijson/
 
 N:	Mauro Condarelli <mc5686@mclink.it>
 F:	package/mc/
@@ -1194,6 +1115,9 @@ F:	package/nvidia-tegra23/nvidia-tegra23-codecs/
 N:	Nimai Mahajan <nimaim@gmail.com>
 F:	package/libucl/
 
+N:	Niranjan Reddy <niranjan.reddy@rockwellcollins.com>
+F:	package/cgroupfs-mount/
+
 N:	Noé Rubinstein <noe.rubinstein@gmail.com>
 F:	package/tpm-tools/
 F:	package/trousers/
@@ -1226,6 +1150,10 @@ F:	package/google-breakpad/
 N:	Patrick Gerber <kpa_info@yahoo.fr>
 F:	package/yavta/
 
+N:	Patrick Ziegler <patrick.ziegler@fh-kl.de>
+F:	package/aespipe/
+F:	package/libqmi/
+
 N:	Paul Cercueil <paul.cercueil@analog.com>
 F:	package/libiio/
 
@@ -1239,10 +1167,8 @@ N:	Peter Korsgaard <peter@korsgaard.com>
 F:	board/orangepi/
 F:	configs/orangepi_pc_defconfig
 F:	package/flickcurl/
-F:	package/jo/
 F:	package/libfastjson/
 F:	package/lzop/
-F:	package/memtool/
 F:	package/mosquitto/
 F:	package/python-alsaaudio/
 F:	package/python-enum/
@@ -1306,7 +1232,6 @@ F:	package/libvips/
 N:	Pieterjan Camerlynck <pieterjan.camerlynck@gmail.com>
 F:	package/libdvbpsi/
 F:	package/mraa/
-F:	package/synergy/
 
 N:	Pranit Sirsat <Pranit.Sirsat@imgtec.com>
 F:	package/paho-mqtt-c/
@@ -1314,14 +1239,13 @@ F:	package/paho-mqtt-c/
 N:	Qais Yousef <Qais.Yousef@imgtec.com>
 F:	package/bellagio/
 
-N:	Rahul Bedarkar <rahulbedarkar89@gmail.com>
+N:	Rahul Bedarkar <rahul.bedarkar@imgtec.com>
 F:	package/cxxtest/
 F:	package/gflags/
 F:	package/glog/
 F:	package/gssdp/
 F:	package/gupnp/
 F:	package/gupnp-av/
-F:	package/nanomsg/
 
 N:	Rahul Jain <rahul.jain@imgtec.com>
 F:	package/uhttpd/
@@ -1336,9 +1260,6 @@ F:	package/atop/
 N:	Rhys Williams <github@wilberforce.co.nz>
 F:	package/lirc-tools/
 
-N:	Ricardo Martincoski <ricardo.martincoski@gmail.com>
-F:	support/scripts/check*package*
-
 N:	Richard Braun <rbraun@sceen.net>
 F:	package/curlftpfs/
 F:	package/tzdata/
@@ -1360,14 +1281,10 @@ F:	package/enlightenment/
 F:	package/expedite/
 F:	package/iqvlinux/
 F:	package/liblinear/
-F:	package/lensfun/
 F:	package/linux-syscall-support/
-F:	package/lugaru/
 F:	package/mcelog/
 F:	package/openpowerlink/
-F:	package/physfs/
 F:	package/stress-ng/
-F:	package/supertux/
 F:	package/terminology/
 F:	package/upower/
 F:	package/xenomai/
@@ -1439,12 +1356,6 @@ F:	package/kyua/
 F:	package/lutok/
 F:	package/yaml-cpp/
 
-N:	Semyon Kolganov <semenak94@mail.ru>
-F:	package/fmt/
-F:	package/libbson/
-F:	package/lua-resty-http/
-F:	package/mpir/
-
 N:	Sergio Prado <sergio.prado@e-labworks.com>
 F:	package/libgdiplus/
 F:	package/mongodb/
@@ -1502,9 +1413,6 @@ F:	package/libtasn1/
 F:	package/proxychains-ng/
 F:	package/yasm/
 
-N:	Stefan Sørensen <stefan.sorensen@spectralink.com>
-F:	package/libscrypt/
-
 N:	Stephan Hoffmann <sho@relinux.de>
 F:	package/cache-calibrator/
 F:	package/gtest/
@@ -1613,6 +1521,7 @@ F:	package/ne10/
 F:	package/pkg-python.mk
 F:	package/pkg-autotools.mk
 F:	package/pkg-generic.mk
+F:	package/polarssl/
 F:	package/python/
 F:	package/python3/
 F:	package/python-mad/
@@ -1674,6 +1583,10 @@ F:	package/uclibc/
 F:	package/uclibc-ng-test/
 F:	package/mksh/
 
+N:	Waldemar Rymarkiewicz <waldemar.rymarkiewicz@tieto.com>
+F:	package/ccid/
+F:	package/pcsc-lite/
+
 N:	Will Newton <will.newton@gmail.com>
 F:	package/enchant/
 F:	package/erlang/
@@ -1713,7 +1626,6 @@ F:	package/libseccomp/
 F:	package/linux-tools/
 F:	package/mesa3d-headers/
 F:	package/mke2img/
-F:	package/nbd/
 F:	package/nut/
 F:	package/nvidia-driver/
 F:	package/omxplayer/
@@ -1762,7 +1674,6 @@ F:	package/linux-firmware/
 F:	package/modem-manager/
 F:	package/nuttcp/
 F:	package/parted/
-F:	package/phytool/
 F:	package/python*
 F:	package/ser2net/
 F:	package/socketcand/

Makefile

@@ -86,9 +86,9 @@ else # umask / $(CURDIR) / $(O)
 all:
 
 # Set and export the version string
-export BR2_VERSION := 2017.05
+export BR2_VERSION := 2017.02.2
 # Actual time the release is cut (for reproducible builds)
-BR2_VERSION_EPOCH = 1496267000
+BR2_VERSION_EPOCH = 1493676000
 
 # Save running make version since it's clobbered by the make package
 RUNNING_MAKE_VERSION := $(MAKE_VERSION)
@@ -479,9 +479,6 @@ all: world
 include Makefile.legacy
 
 include package/Makefile.in
-# arch/arch.mk.* must be after package/Makefile.in because it may need to
-# complement variables defined therein, like BR_NO_CHECK_HASH_FOR.
--include $(wildcard arch/arch.mk.*)
 include support/dependencies/dependencies.mk
 
 include toolchain/*.mk
@@ -736,7 +733,7 @@ legal-info-prepare: $(LEGAL_INFO_DIR)
 	@$(call legal-license-file,buildroot,COPYING,COPYING,HOST)
 	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,TARGET)
 	@$(call legal-manifest,PACKAGE,VERSION,LICENSE,LICENSE FILES,SOURCE ARCHIVE,SOURCE SITE,HOST)
-	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPL-2.0+,COPYING,not saved,not saved,HOST)
+	@$(call legal-manifest,buildroot,$(BR2_VERSION_FULL),GPLv2+,COPYING,not saved,not saved,HOST)
 	@$(call legal-warning,the Buildroot source code has not been saved)
 	@cp $(BR2_CONFIG) $(LEGAL_INFO_DIR)/buildroot.config
 
@@ -757,8 +754,6 @@ legal-info: dirs legal-info-clean legal-info-prepare $(foreach p,$(PACKAGES),$(p
 show-targets:
 	@echo $(PACKAGES) $(TARGETS_ROOTFS)
 
-show-build-order: $(patsubst %,%-show-build-order,$(PACKAGES))
-
 graph-build: $(O)/build/build-time.log
 	@install -d $(GRAPHS_DIR)
 	$(foreach o,name build duration,./support/scripts/graph-build-time \
@@ -942,10 +937,7 @@ printvars:
 		$(sort $(if $(VARS),$(filter $(VARS),$(.VARIABLES)),$(.VARIABLES))), \
 		$(if $(filter-out environment% default automatic, \
 				$(origin $V)), \
-		$(if $(QUOTED_VARS),\
-			$(info $V='$(subst ','\'',$(if $(RAW_VARS),$(value $V),$($V)))'), \
-			$(info $V=$(if $(RAW_VARS),$(value $V),$($V))))))
-# ' Syntax colouring...
+		$(info $V=$($V) ($(value $V)))))
 
 clean:
 	rm -rf $(TARGET_DIR) $(BINARIES_DIR) $(HOST_DIR) \
@@ -1023,7 +1015,6 @@ help:
 	@echo '  source-check           - check selected packages for valid download URLs'
 	@echo '  external-deps          - list external packages used'
 	@echo '  legal-info             - generate info about license compliance'
-	@echo '  printvars              - dump all the internal variables'
 	@echo
 	@echo '  make V=0|1             - 0 => quiet build (default), 1 => verbose build'
 	@echo '  make O=dir             - Locate all output files in "dir", including .config'
@@ -1077,9 +1068,6 @@ release:
 print-version:
 	@echo $(BR2_VERSION_FULL)
 
-.gitlab-ci.yml: .gitlab-ci.yml.in configs/*_defconfig
-	(cd configs; LC_ALL=C ls -1 *_defconfig) | sed 's/$$/: *defconfig/' | cat $< - > $@
-
 include docs/manual/manual.mk
 -include $(foreach dir,$(BR2_EXTERNAL_DIRS),$(dir)/docs/*/*.mk)
 

arch/Config.in

@@ -85,14 +85,6 @@ config BR2_bfin
 	  http://www.analog.com/
 	  http://en.wikipedia.org/wiki/Blackfin
 
-config BR2_csky
-	bool "csky"
-	select BR2_ARCH_HAS_MMU_MANDATORY
-	help
-	  csky is processor IP from china.
-	  http://www.c-sky.com/
-	  http://www.github.com/c-sky
-
 config BR2_i386
 	bool "i386"
 	select BR2_ARCH_HAS_MMU_MANDATORY
@@ -292,12 +284,6 @@ config BR2_GCC_TARGET_MODE
 config BR2_BINFMT_SUPPORTS_SHARED
 	bool
 
-# Must match the name of the architecture from readelf point of view,
-# i.e the "Machine:" field of readelf output. See get_machine_name()
-# in binutils/readelf.c for the list of possible values.
-config BR2_READELF_ARCH_NAME
-	string
-
 # Set up target binary format
 choice
 	prompt "Target Binary Format"
@@ -383,10 +369,6 @@ if BR2_bfin
 source "arch/Config.in.bfin"
 endif
 
-if BR2_csky
-source "arch/Config.in.csky"
-endif
-
 if BR2_m68k
 source "arch/Config.in.m68k"
 endif

arch/Config.in.arc

@@ -38,10 +38,6 @@ config BR2_GCC_TARGET_CPU
 	default "arc700" if BR2_arc770d
 	default "archs"	 if BR2_archs38
 
-config BR2_READELF_ARCH_NAME
-	default "ARCompact"	if BR2_arc750d || BR2_arc770d
-	default "ARCv2"		if BR2_archs38
-
 choice
 	prompt "MMU Page Size"
 	default BR2_ARC_PAGE_SIZE_8K

arch/Config.in.arm

@@ -536,13 +536,13 @@ config BR2_GCC_TARGET_CPU
 	default "iwmmxt"	if BR2_iwmmxt
 	default "cortex-a53"		if (BR2_cortex_a53 && !BR2_ARCH_IS_64)
 	default "cortex-a53+fp"		if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8)
-	default "cortex-a53+fp+simd"	if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
+	default "cortex-a53+fp+simd" 	if (BR2_cortex_a53 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
 	default "cortex-a57"		if (BR2_cortex_a57 && !BR2_ARCH_IS_64)
 	default "cortex-a57+fp"		if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8)
-	default "cortex-a57+fp+simd"	if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
+	default "cortex-a57+fp+simd" 	if (BR2_cortex_a57 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
 	default "cortex-a72"		if (BR2_cortex_a72 && !BR2_ARCH_IS_64)
 	default "cortex-a72+fp"		if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_FP_ARMV8)
-	default "cortex-a72+fp+simd"	if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
+	default "cortex-a72+fp+simd" 	if (BR2_cortex_a72 && BR2_ARCH_IS_64 && BR2_ARM_FPU_NEON_FP_ARMV8)
 
 config BR2_GCC_TARGET_ABI
 	default "aapcs-linux"	if BR2_arm || BR2_armeb
@@ -552,11 +552,11 @@ config BR2_GCC_TARGET_FPU
 	depends on BR2_arm || BR2_armeb
 	default "vfp"		if BR2_ARM_FPU_VFPV2
 	default "vfpv3"		if BR2_ARM_FPU_VFPV3
-	default "vfpv3-d16"	if BR2_ARM_FPU_VFPV3D16
-	default "vfpv4"		if BR2_ARM_FPU_VFPV4
-	default "vfpv4-d16"	if BR2_ARM_FPU_VFPV4D16
-	default "neon"		if BR2_ARM_FPU_NEON
-	default "neon-vfpv4"	if BR2_ARM_FPU_NEON_VFPV4
+	default "vfpv3-d16" 	if BR2_ARM_FPU_VFPV3D16
+	default "vfpv4" 	if BR2_ARM_FPU_VFPV4
+	default "vfpv4-d16" 	if BR2_ARM_FPU_VFPV4D16
+	default "neon" 		if BR2_ARM_FPU_NEON
+	default "neon-vfpv4" 	if BR2_ARM_FPU_NEON_VFPV4
 	default "fp-armv8"	if BR2_ARM_FPU_FP_ARMV8
 	default "neon-fp-armv8"	if BR2_ARM_FPU_NEON_FP_ARMV8
 
@@ -568,7 +568,3 @@ config BR2_GCC_TARGET_FLOAT_ABI
 config BR2_GCC_TARGET_MODE
 	default "arm"		if BR2_ARM_INSTRUCTIONS_ARM
 	default "thumb"		if BR2_ARM_INSTRUCTIONS_THUMB || BR2_ARM_INSTRUCTIONS_THUMB2
-
-config BR2_READELF_ARCH_NAME
-	default "ARM"		if BR2_arm || BR2_armeb
-	default "AArch64"	if BR2_aarch64 || BR2_aarch64_be

arch/Config.in.bfin

@@ -105,6 +105,3 @@ config BR2_GCC_TARGET_CPU_REVISION
 	  value of the -mcpu option. For example, if the selected CPU is
 	  bf609, and then selected CPU revision is "0.0", then gcc will
 	  receive the -mcpu=bf609-0.0 option.
-
-config BR2_READELF_ARCH_NAME
-	default "Analog Devices Blackfin"

arch/Config.in.csky

@@ -1,48 +0,0 @@
-choice
-	prompt "Target Architecture Variant"
-	default BR2_ck610
-	help
-	  Specific CPU variant to use
-
-config BR2_ck610
-	bool "ck610"
-
-config BR2_ck807
-	bool "ck807"
-
-config BR2_ck810
-	bool "ck810"
-
-endchoice
-
-config BR2_CSKY_FPU
-	bool "Enable FPU coprocessor"
-	depends on BR2_ck810 || BR2_ck807
-	help
-	  You can say N here if your C-SKY CPU doesn't have a
-	  Floating-Point Coprocessor or if you don't need FPU support
-	  for your user-space programs.
-
-config BR2_CSKY_DSP
-	bool "Enable DSP enhanced instructions"
-	depends on BR2_ck810 || BR2_ck807
-
-config BR2_ARCH
-	default "csky"
-
-config BR2_ENDIAN
-	default "LITTLE"
-
-config BR2_GCC_TARGET_CPU
-	default "ck610"		if (BR2_ck610 && !BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck807"		if (BR2_ck807 && !BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck807e"	if (BR2_ck807 && !BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-	default "ck807f"	if (BR2_ck807 &&  BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck807ef"	if (BR2_ck807 &&  BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-	default "ck810"		if (BR2_ck810 && !BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck810e"	if (BR2_ck810 && !BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-	default "ck810f"	if (BR2_ck810 &&  BR2_CSKY_FPU && !BR2_CSKY_DSP)
-	default "ck810ef"	if (BR2_ck810 &&  BR2_CSKY_FPU &&  BR2_CSKY_DSP)
-
-config BR2_READELF_ARCH_NAME
-	default "CSKY"

arch/Config.in.m68k

@@ -35,6 +35,3 @@ endchoice
 config BR2_GCC_TARGET_CPU
 	default "68040"		if BR2_m68k_68040
 	default "5208"		if BR2_m68k_cf5208
-
-config BR2_READELF_ARCH_NAME
-	default "MC68000"

arch/Config.in.microblaze

@@ -6,9 +6,6 @@ config BR2_ENDIAN
 	default "LITTLE" if BR2_microblazeel
 	default "BIG"	 if BR2_microblazebe
 
-config BR2_READELF_ARCH_NAME
-	default "Xilinx MicroBlaze"
-
 config BR2_microblaze
 	bool
 	default y if BR2_microblazeel || BR2_microblazebe

arch/Config.in.mips

@@ -134,7 +134,7 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"	if BR2_mipsel || BR2_mips64el
-	default "BIG"		if BR2_mips || BR2_mips64
+	default "BIG" 	    	if BR2_mips || BR2_mips64
 
 config BR2_GCC_TARGET_ARCH
 	default "mips32"	if BR2_mips_32
@@ -161,6 +161,3 @@ config BR2_GCC_TARGET_ABI
 	default "32"		if BR2_MIPS_OABI32
 	default "n32"		if BR2_MIPS_NABI32
 	default "64"		if BR2_MIPS_NABI64
-
-config BR2_READELF_ARCH_NAME
-	default "MIPS R3000"

arch/Config.in.nios2

@@ -3,6 +3,3 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "LITTLE"
-
-config BR2_READELF_ARCH_NAME
-	default "Altera Nios II"

arch/Config.in.or1k

@@ -3,6 +3,3 @@ config BR2_ARCH
 
 config BR2_ENDIAN
 	default "BIG"
-
-config BR2_READELF_ARCH_NAME
-	default "OpenRISC 1000"

arch/Config.in.powerpc

@@ -212,7 +212,3 @@ config BR2_GCC_TARGET_ABI
 	default "no-spe"		if BR2_PPC_ABI_no-spe
 	default "ibmlongdouble"		if BR2_PPC_ABI_ibmlongdouble
 	default "ieeelongdouble"	if BR2_PPC_ABI_ieeelongdouble
-
-config BR2_READELF_ARCH_NAME
-	default "PowerPC"	if BR2_powerpc
-	default "PowerPC64"	if BR2_powerpc64 || BR2_powerpc64le

arch/Config.in.sh

@@ -27,6 +27,3 @@ config BR2_ARCH
 config BR2_ENDIAN
 	default "LITTLE"	if BR2_sh4 || BR2_sh4a
 	default "BIG"		if BR2_sh2a || BR2_sh4eb || BR2_sh4aeb
-
-config BR2_READELF_ARCH_NAME
-	default "Renesas / SuperH SH"

arch/Config.in.sparc

@@ -28,7 +28,3 @@ config BR2_GCC_TARGET_CPU
 	default "leon3"		if BR2_sparc_leon3
 	default "v8"		if BR2_sparc_v8
 	default "ultrasparc"	if BR2_sparc_v9
-
-config BR2_READELF_ARCH_NAME
-	default "Sparc"		if BR2_sparc
-	default "Sparc v9"	if BR2_sparc64

arch/Config.in.x86

@@ -275,7 +275,3 @@ config BR2_GCC_TARGET_ARCH
 	default "c3"		if BR2_x86_c3
 	default "c3-2"		if BR2_x86_c32
 	default "geode"		if BR2_x86_geode
-
-config BR2_READELF_ARCH_NAME
-	default "Intel 80386"			if BR2_i386
-	default "Advanced Micro Devices X86-64" if BR2_x86_64

arch/Config.in.xtensa

@@ -54,6 +54,3 @@ config BR2_ENDIAN
 
 config BR2_ARCH
 	default "xtensa"	if BR2_xtensa
-
-config BR2_READELF_ARCH_NAME
-	default "Tensilica Xtensa Processor"

arch/arch.mk.xtensa

@@ -1,28 +0,0 @@
-################################################################################
-# Those two variables can be used by packages that need to extract the overlay.
-#
-# ARCH_XTENSA_CORE_NAME   is the name of the Xtensa core; empty if none or the
-#                         standard 'fsf' core.
-# ARCH_XTENSA_OVERLAY_TAR is the path to the overlay tarball; only valid when
-#                         ARCH_XTENSA_CORE_NAME is not empty.
-#
-# Example:
-#   ifneq ($(ARCH_XTENSA_CORE_NAME),)
-#       tar xf $(ARCH_XTENSA_OVERLAY_TAR) -C $(@D) --strip-components=1 gcc
-#   endif
-################################################################################
-ARCH_XTENSA_CORE_NAME = $(call qstrip,$(BR2_XTENSA_CORE_NAME))
-ARCH_XTENSA_OVERLAY_TAR = $(call qstrip,$(BR2_XTENSA_OVERLAY_DIR))/xtensa_$(ARCH_XTENSA_CORE_NAME).tar
-
-################################################################################
-# arch-xtensa-overlay-extract -- extract an extensa overlay
-#
-# argument 1 is the path in which to extract
-# argument 2 is the component to extract, one of: gcc, binutils, gdb
-#
-# Example:
-#   $(call arch-xtensa-overlay-extract,/path/to/overlay.tar,$(@D),gcc)
-################################################################################
-define arch-xtensa-overlay-extract
-	tar xf $(ARCH_XTENSA_OVERLAY_TAR) -C $(1) --strip-components=1 $(2)
-endef

board/altera/post-image.sh

@@ -0,0 +1,8 @@
+#!/bin/sh
+# post-image.sh for SoCkit/SoCDK
+# 2014, "Roman Diouskine" <roman.diouskine@savoirfairelinux.com>
+# 2014, "Sebastien Bourdelin" <sebastien.bourdelin@savoirfairelinux.com>
+
+# create a DTB file copy with the name expected by the u-boot config
+# Name of the DTB is passed as the second argument to the script.
+cp -af $BINARIES_DIR/${2}.dtb  $BINARIES_DIR/socfpga.dtb

board/altera/readme.txt

@@ -0,0 +1,165 @@
+SoCkit, SoC Development Kit
+
+Intro
+=====
+
+This is the buildroot board support for the Arrow SoCkit Evaluation Board
+and the Altera Cyclone 5 Development Board.
+
+A good source of information for Arrow SoCkit:
+http://www.rocketboards.org/foswiki/Documentation/ArrowSoCKitEvaluationBoard
+
+More information about SoC DK:
+https://www.altera.com/products/boards_and_kits/dev-kits/altera/kit-cyclone-v-soc.html
+
+How it works
+============
+
+Boot process:
+-------------
+
+In summary, the bootloader has multiple stages, an hardcoded boot routine is
+loaded from an on-chip ROM.
+
+  - That first stage is scanning the SD card's partition table to find
+    partition having the 0xA2 type.
+  - This partition is expected to contain a boot image on its first 60 Kb,
+    because u-boot is bigger, we must fill it with a preloader (u-boot-spl)
+    which will load the u-boot image.
+  - Then the u-boot image will load the Linux kernel.
+
+A good source of information for the boot process is:
+http://xillybus.com/tutorials/u-boot-image-altera-soc
+
+Note for the SPL:
+The SPL generated by the u-boot from Rocketboards doesn't seems to work,
+therefore we provide a patch for {uboot-PKG}/board/altera/socfpga_cyclone5/*
+based on the files generated with the Altera example design.
+
+For more information about this files please look at:
+http://www.rocketboards.org/foswiki/Documentation/PreloaderUbootCustomization#Common_Source_Code
+
+How to build it
+===============
+
+Configure Buildroot
+-------------------
+
+The altera_sockit_defconfig configuration is a minimal configuration with
+all that is required to bring the SoCkit:
+
+  $ make altera_sockit_defconfig
+
+and for the SoC Development Board:
+
+  $ make altera_sockdk_defconfig
+
+Build everything
+----------------
+
+Note: you will need to have access to the network, since Buildroot will
+download the packages' sources.
+
+  $ make
+
+Result of the build
+-------------------
+
+After building, you should obtain this tree:
+
+    output/images/
+    ├── rootfs.ext2
+    ├── rootfs.ext3 -> rootfs.ext2
+    ├── rootfs.tar
+    ├── socfpga_cyclone5_sockit.dtb or socfpga_cyclone5_socdk.dtb
+    ├── socfpga.dtb
+    ├── u-boot.img
+    ├── u-boot-spl.bin
+    └── uImage
+
+
+Signing the Preloader
+---------------------
+
+*** BEWARE ****
+The u-boot-spl.bin must be signed using the Altera's tool "mkpimage".
+This tool comes as a part of the Altera development environnment (SoC EDS).
+A fork of this tool have been done by Maxime Hadjinlian and can be found here:
+https://github.com/maximeh/mkpimage
+
+Remember that without signing the u-boot-spl.bin, the board will not boot !!!
+
+  $ mkpimage u-boot-spl.bin -o u-boot-spl-signed.bin
+
+Prepare your SDcard
+===================
+
+A good source of information for the partitioning process is:
+http://www.rocketboards.org/foswiki/view/Projects/SoCKitLinaroLinuxDesktop#Partition_the_SD_Card
+
+Create the SDcard partition table
+----------------------------------
+
+Determine the device associated to the SD card:
+
+  $ cat /proc/partitions
+
+let's assume it is /dev/mmcblk0:
+
+  $ sudo fdisk /dev/mmcblk0
+
+Delete all previous partitions with 'd' then create the new partition table,
+using these options, pressing enter after each one:
+
+  * n p 1 9000000 +20480K t 1 b
+  * n p 2 4096 +4496384K t 83
+  * n p 3 2048 +1024K t 3 a2
+
+Using the 'p' option, the SD card's partition must look like this:
+
+Device         Boot     Start       End  Blocks  Id System
+/dev/mmcblk0p1        9000000   9041919   20960   b W95 FAT32
+/dev/mmcblk0p2           4096   8996863 4496384  83 Linux
+/dev/mmcblk0p3           2048      4095    1024  a2 Unknown
+
+Then write the partition table using 'w' and exit.
+
+Make partition one a DOS partition:
+
+  $ sudo mkdosfs /dev/mmcblk0p1
+
+Install the binaries to the SDcard
+----------------------------------
+
+Remember your binaries are located in output/images/, go inside that directory:
+
+  $ cd output/images
+
+The partition with type a2 is the partition scan by the first bootloader stage
+in the SoCkit ROM to find the next bootloader stage so we must write the signed
+preloader and the u-boot binaries in that partition:
+
+  $ sudo dd if=u-boot-spl-signed.bin of=/dev/mmcblk0p3 bs=64k seek=0
+  $ sudo dd if=u-boot.img of=/dev/mmcblk0p3 bs=64k seek=4
+
+Copy the Linux kernel and its Device tree:
+
+  $ sudo mkdir /mnt/sdcard
+  $ sudo mount /dev/mmcblk0p1 /mnt/sdcard
+  $ sudo cp socfpga.dtb uImage /mnt/sdcard
+  $ sudo umount /mnt/sdcard
+
+Copy the rootfs:
+
+  $ sudo dd if=rootfs.ext2 of=/dev/mmcblk0p2 bs=64k
+  $ sudo sync
+
+It's Done!
+
+Finish
+======
+
+Eject your SDcard, insert it in your SoCkit, and power it up.
+
+if you want a serial console, you can plug a micro B USB cable on the USB-UART
+port, the serial port config to used is 57600/8-N-1.

board/altera/sockit/uboot-sockit-preloader-sample-design.patch

@@ -0,0 +1,820 @@
+From c70f2ebb350da20af1a0ed4b7960b8e5a1952713 Mon Sep 17 00:00:00 2001
+From: Sebastien Bourdelin <sebastien.bourdelin@savoirfairelinux.com>
+Date: Thu, 20 Feb 2014 11:51:31 -0500
+Subject: [PATCH] board: add to sockit a working preloader design
+
+---
+ board/altera/socfpga_cyclone5/build.h              |   2 +-
+ board/altera/socfpga_cyclone5/iocsr_config.c       | 314 ++++++++++-----------
+ board/altera/socfpga_cyclone5/pinmux_config.c      |  32 +--
+ board/altera/socfpga_cyclone5/pinmux_config.h      |   8 +-
+ board/altera/socfpga_cyclone5/sdram/sdram_config.h |  14 +-
+ .../altera/socfpga_cyclone5/sdram/sequencer_auto.h |  16 +-
+ .../sdram/sequencer_auto_ac_init.c                 |  16 +-
+ .../socfpga_cyclone5/sdram/sequencer_defines.h     |  34 +--
+ 8 files changed, 218 insertions(+), 218 deletions(-)
+
+diff --git a/board/altera/socfpga_cyclone5/build.h b/board/altera/socfpga_cyclone5/build.h
+index e5d9c3c..a369015 100644
+--- a/board/altera/socfpga_cyclone5/build.h
++++ b/board/altera/socfpga_cyclone5/build.h
+@@ -29,7 +29,7 @@
+  * Handoff files must provide user option whether to
+  * enable watchdog during preloader execution phase
+  */
+-#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(0)
++#define CONFIG_PRELOADER_WATCHDOG_ENABLE	(1)
+ 
+ /*
+  * Handoff files must provide user option whether to enable
+diff --git a/board/altera/socfpga_cyclone5/iocsr_config.c b/board/altera/socfpga_cyclone5/iocsr_config.c
+index fa663e1..90fc154 100644
+--- a/board/altera/socfpga_cyclone5/iocsr_config.c
++++ b/board/altera/socfpga_cyclone5/iocsr_config.c
+@@ -7,113 +7,113 @@ const unsigned long iocsr_scan_chain0_table[((CONFIG_HPS_IOCSR_SCANCHAIN0_LENGTH
+ 	0xC0000000,
+ 	0x0000003F,
+ 	0x00008000,
+-	0x00020080,
+-	0x08020000,
+-	0x08000000,
+-	0x00018020,
++	0x00060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
+ 	0x00000000,
+ 	0x00004000,
+-	0x00010040,
+-	0x04010000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x000300C0,
++	0x0C030000,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x00020000,
+-	0x02008000,
+-	0x02000000,
+-	0x00000008,
+-	0x00002008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+ };
+ 
+ const unsigned long iocsr_scan_chain1_table[((CONFIG_HPS_IOCSR_SCANCHAIN1_LENGTH / 32) + 1)] = {
+-	0x000C0300,
+-	0x10040000,
+-	0x100000C0,
+-	0x00000040,
+-	0x00010040,
++	0x00100000,
++	0x300C0000,
++	0x300000C0,
++	0x000000C0,
++	0x000300C0,
+ 	0x00008000,
+ 	0x00080000,
+-	0x18060000,
+-	0x18000000,
+-	0x00000060,
+-	0x00018060,
++	0x20000000,
++	0x00000000,
++	0x00000080,
++	0x00020000,
+ 	0x00004000,
+-	0x00010040,
++	0x000300C0,
+ 	0x10000000,
+-	0x04000000,
+-	0x00000010,
+-	0x00004010,
++	0x0C000000,
++	0x00000030,
++	0x0000C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
++	0x06018060,
++	0x06018000,
+ 	0x01FE0000,
+ 	0xF8000000,
+ 	0x00000007,
+ 	0x00001000,
+-	0x00004010,
+-	0x01004000,
+-	0x01000000,
+-	0x00003004,
+-	0x00001004,
++	0x0000C030,
++	0x0300C000,
++	0x03000000,
++	0x0000300C,
++	0x0000300C,
+ 	0x00000800,
+ 	0x00000000,
+ 	0x00000000,
+-	0x00800000,
+-	0x00000002,
++	0x01800000,
++	0x00000006,
+ 	0x00002000,
+ 	0x00000400,
+ 	0x00000000,
+-	0x00401000,
++	0x00C03000,
+ 	0x00000003,
+ 	0x00000000,
+ 	0x00000000,
+ 	0x00000200,
+-	0x00600802,
++	0x00601806,
+ 	0x00000000,
+-	0x80200000,
+-	0x80000600,
+-	0x00000200,
++	0x80600000,
++	0x80000601,
++	0x00000601,
+ 	0x00000100,
+-	0x00300401,
+-	0xC0100400,
+-	0x40100000,
+-	0x40000300,
+-	0x000C0100,
++	0x00300C03,
++	0xC0300C00,
++	0xC0300000,
++	0xC0000300,
++	0x000C0300,
+ 	0x00000080,
+ };
+ 
+ const unsigned long iocsr_scan_chain2_table[((CONFIG_HPS_IOCSR_SCANCHAIN2_LENGTH / 32) + 1)] = {
+-	0x80040100,
++	0x300C0300,
+ 	0x00000000,
+ 	0x0FF00000,
+ 	0x00000000,
+-	0x0C010040,
++	0x0C0300C0,
+ 	0x00008000,
+-	0x18020080,
+-	0x00000000,
+-	0x08000000,
+-	0x00040020,
+-	0x06018060,
++	0x18060180,
++	0x18060000,
++	0x18000000,
++	0x00018060,
++	0x00018060,
+ 	0x00004000,
+-	0x0C010040,
+-	0x04010000,
++	0x000300C0,
++	0x0C030000,
+ 	0x00000030,
+ 	0x00000000,
+-	0x03004010,
++	0x0300C030,
+ 	0x00002000,
+-	0x06008020,
+-	0x02008000,
+-	0x02000018,
+-	0x00006008,
+-	0x01802008,
++	0x00018060,
++	0x06018000,
++	0x06000000,
++	0x00000018,
++	0x00006018,
+ 	0x00001000,
+-	0x03004010,
+-	0x01004000,
+-	0x0100000C,
+-	0x00003004,
+-	0x00C01004,
++	0x0000C030,
++	0x00000000,
++	0x03000000,
++	0x0000000C,
++	0x00C0300C,
+ 	0x00000800,
+ };
+ 
+@@ -170,14 +170,14 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
+-	0x01A01C70,
++	0x34059606,
++	0x01A03CF0,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
++	0x59606803,
++	0x03CF0340,
+ 	0xD000001A,
+ 	0x068030C0,
+ 	0x10040000,
+@@ -244,15 +244,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xA0000034,
+ 	0x0D000001,
+ 	0x6068030C,
+-	0xC7034018,
+-	0x0E381A01,
++	0xCF034059,
++	0x1E781A03,
+ 	0x8030C0D0,
+-	0x34018606,
++	0x34059606,
+ 	0x01A00000,
+ 	0x0C0D0000,
+-	0x18606803,
+-	0x01C70340,
+-	0xD00E381A,
++	0x59606803,
++	0x03CF0340,
++	0xD01E781A,
+ 	0x068030C0,
+ 	0x10040000,
+ 	0x00200000,
+@@ -273,7 +273,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -301,7 +301,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -321,15 +321,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x01860680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -347,7 +347,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -375,7 +375,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00015000,
+@@ -395,15 +395,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
+-	0x821A00C3,
++	0xF5DE791E,
++	0x0356D348,
++	0x821A02CB,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -421,7 +421,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -449,7 +449,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -469,15 +469,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -495,7 +495,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0xAA0D4000,
+-	0x01C3A808,
++	0x01C3A810,
+ 	0xAA0D4000,
+ 	0x01C3A810,
+ 	0x00040100,
+@@ -523,7 +523,7 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x2A835000,
+-	0x0070EA02,
++	0x0070EA04,
+ 	0x2A835000,
+ 	0x0070EA04,
+ 	0x00010040,
+@@ -543,15 +543,15 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x14864000,
+ 	0x69A47A05,
+ 	0xCBCF23D7,
+-	0xF41E791E,
+-	0x034ED348,
++	0xF5DE791E,
++	0x0356D348,
+ 	0x821A0000,
+ 	0x0000D000,
+ 	0x00000680,
+ 	0xD769A47A,
+ 	0x1ECBCF23,
+-	0x48F41E79,
+-	0x00034ED3,
++	0x48F5DE79,
++	0x000356D3,
+ 	0x00080200,
+ 	0x00001000,
+ 	0x00080200,
+@@ -567,80 +567,80 @@ const unsigned long iocsr_scan_chain3_table[((CONFIG_HPS_IOCSR_SCANCHAIN3_LENGTH
+ 	0x04000002,
+ 	0x00820000,
+ 	0x00489000,
+-	0x001A1A1A,
+-	0x085506A0,
+-	0x0000E1D4,
+-	0x045506A0,
+-	0x0000E1D4,
+-	0x085506A0,
+-	0x8000E1D4,
++	0x801A1A1A,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
++	0x00000200,
++	0x80000004,
+ 	0x00000200,
+ 	0x00000004,
+-	0x04000000,
+-	0x00000009,
+-	0x00002410,
++	0x00040000,
++	0x10000000,
++	0x00000000,
+ 	0x00000040,
+-	0x41000000,
+-	0x00002082,
+-	0x00000350,
+-	0x000000DA,
++	0x00010000,
++	0x40002000,
++	0x00000100,
++	0x40000002,
++	0x00000100,
++	0x40000002,
+ 	0x00000100,
+ 	0x40000002,
+ 	0x00000100,
+ 	0x00000002,
+-	0x042A8350,
+-	0x000070EA,
+-	0x86000000,
+-	0x08000004,
++	0x00020000,
++	0x08000000,
+ 	0x00000000,
+-	0x00482000,
+-	0x21800000,
+-	0x00101061,
+-	0x021541A8,
+-	0x00003875,
+-	0x011541A8,
+-	0x00003875,
+-	0x021541A8,
+-	0x20003875,
++	0x00000020,
++	0x00008000,
++	0x20001000,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
++	0x00000080,
++	0x20000001,
+ 	0x00000080,
+ 	0x00000001,
+-	0x41000000,
+-	0x00000002,
+-	0x00FF0904,
++	0x00010000,
++	0x04000000,
++	0x00FF0000,
+ 	0x00000000,
+-	0x90400000,
+-	0x00000820,
++	0x00004000,
++	0x00000800,
+ 	0x80000001,
+-	0x38D612AF,
+-	0x86F8E38E,
+-	0x0A0A78B4,
+-	0x000D020A,
++	0x00041419,
++	0x40000000,
++	0x04000816,
++	0x000D0000,
+ 	0x00006800,
+-	0x028A4320,
+-	0xEBB4D23D,
+-	0x8F65E791,
+-	0xA47A0F3C,
+-	0x0001A769,
+-	0x00410D00,
++	0x00000340,
++	0xD000001A,
++	0x06800000,
++	0x00340000,
++	0x0001A000,
++	0x00000D00,
+ 	0x40000068,
+-	0x3D000003,
+-	0x91EBB4D2,
+-	0x3C8F65E7,
+-	0x69A47A0F,
+-	0x000001A7,
++	0x1A000003,
++	0x00D00000,
++	0x00068000,
++	0x00003400,
++	0x000001A0,
++	0x00000401,
++	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+ 	0x00000401,
+ 	0x00000008,
+-	0x00000540,
+-	0x000003A8,
+-	0x10AA0D40,
+-	0x8001C3A8,
++	0x00000401,
++	0x80000008,
+ 	0x0000007F,
++	0x20000000,
+ 	0x00000000,
+-	0x00004060,
+-	0xE1208000,
++	0xE0000080,
+ 	0x0000001F,
+-	0x00004100,
++	0x00004000,
+ };
+ 
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.c b/board/altera/socfpga_cyclone5/pinmux_config.c
+index 730067e..cfd74cd 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.c
++++ b/board/altera/socfpga_cyclone5/pinmux_config.c
+@@ -23,7 +23,7 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	0, /* EMACIO18 */
+ 	0, /* EMACIO19 */
+ 	3, /* FLASHIO0 */
+-	3, /* FLASHIO1 */
++	0, /* FLASHIO1 */
+ 	3, /* FLASHIO2 */
+ 	3, /* FLASHIO3 */
+ 	0, /* FLASHIO4 */
+@@ -34,25 +34,25 @@ unsigned long sys_mgr_init_table[CONFIG_HPS_PINMUX_NUM] = {
+ 	3, /* FLASHIO9 */
+ 	3, /* FLASHIO10 */
+ 	3, /* FLASHIO11 */
+-	3, /* GENERALIO0 */
+-	3, /* GENERALIO1 */
+-	3, /* GENERALIO2 */
+-	3, /* GENERALIO3 */
+-	3, /* GENERALIO4 */
+-	3, /* GENERALIO5 */
+-	3, /* GENERALIO6 */
+-	3, /* GENERALIO7 */
+-	3, /* GENERALIO8 */
++	0, /* GENERALIO0 */
++	1, /* GENERALIO1 */
++	1, /* GENERALIO2 */
++	1, /* GENERALIO3 */
++	1, /* GENERALIO4 */
++	0, /* GENERALIO5 */
++	0, /* GENERALIO6 */
++	0, /* GENERALIO7 */
++	0, /* GENERALIO8 */
+ 	3, /* GENERALIO9 */
+ 	3, /* GENERALIO10 */
+ 	3, /* GENERALIO11 */
+ 	3, /* GENERALIO12 */
+-	2, /* GENERALIO13 */
+-	2, /* GENERALIO14 */
+-	3, /* GENERALIO15 */
+-	3, /* GENERALIO16 */
+-	2, /* GENERALIO17 */
+-	2, /* GENERALIO18 */
++	0, /* GENERALIO13 */
++	0, /* GENERALIO14 */
++	1, /* GENERALIO15 */
++	1, /* GENERALIO16 */
++	1, /* GENERALIO17 */
++	1, /* GENERALIO18 */
+ 	0, /* GENERALIO19 */
+ 	0, /* GENERALIO20 */
+ 	0, /* GENERALIO21 */
+diff --git a/board/altera/socfpga_cyclone5/pinmux_config.h b/board/altera/socfpga_cyclone5/pinmux_config.h
+index fb483ab..64c750a 100644
+--- a/board/altera/socfpga_cyclone5/pinmux_config.h
++++ b/board/altera/socfpga_cyclone5/pinmux_config.h
+@@ -11,15 +11,15 @@
+ #define CONFIG_HPS_UART0 (1)
+ #define CONFIG_HPS_UART1 (0)
+ #define CONFIG_HPS_TRACE (0)
+-#define CONFIG_HPS_I2C0 (1)
+-#define CONFIG_HPS_I2C1 (0)
++#define CONFIG_HPS_I2C0 (0)
++#define CONFIG_HPS_I2C1 (1)
+ #define CONFIG_HPS_I2C2 (0)
+ #define CONFIG_HPS_I2C3 (0)
+ #define CONFIG_HPS_SPIM0 (1)
+-#define CONFIG_HPS_SPIM1 (0)
++#define CONFIG_HPS_SPIM1 (1)
+ #define CONFIG_HPS_SPIS0 (0)
+ #define CONFIG_HPS_SPIS1 (0)
+-#define CONFIG_HPS_CAN0 (1)
++#define CONFIG_HPS_CAN0 (0)
+ #define CONFIG_HPS_CAN1 (0)
+ 
+ #define CONFIG_HPS_SDMMC_BUSWIDTH (4)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sdram_config.h b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+index b90d6f3..dd027ef 100755
+--- a/board/altera/socfpga_cyclone5/sdram/sdram_config.h
++++ b/board/altera/socfpga_cyclone5/sdram/sdram_config.h
+@@ -4,16 +4,16 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMTYPE			(2)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_MEMBL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ADDRORDER		(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(1)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCEN			(0)
++#define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_ECCCORREN		(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_REORDEREN		(1)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_STARVELIMIT		(10)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_DQSTRKEN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_CTRLCFG_NODMPINS			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(6)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCWL			(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_AL			(0)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(7)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TCL			(11)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRRD			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TFAW			(12)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING1_TRFC			(104)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TREFI		(3120)
+@@ -21,7 +21,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TRP		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWR		(6)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING2_IF_TWTR		(4)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(4)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRTP			(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRAS			(14)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TRC			(20)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMTIMING3_TMRD			(4)
+@@ -33,7 +33,7 @@
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_ROWBITS		(15)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_BANKBITS		(3)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMADDRW_CSBITS			(1)
+-#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(40)
++#define CONFIG_HPS_SDR_CTRLCFG_DRAMIFWIDTH_IFWIDTH		(32)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMDEVWIDTH_DEVWIDTH		(8)
+ #define CONFIG_HPS_SDR_CTRLCFG_DRAMINTR_INTREN			(0)
+ #define CONFIG_HPS_SDR_CTRLCFG_STATICCFG_MEMBL			(2)
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+index e8c5484..919676d 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto.h
+@@ -34,7 +34,7 @@
+ #define __RW_MGR_ac_read_en 0x21
+ #define __RW_MGR_ac_mrs3_mirr 0x0C
+ #define __RW_MGR_ac_mrs2 0x05
+-#define __RW_MGR_CONTENT_ac_mrs1 0x10090044
++#define __RW_MGR_CONTENT_ac_mrs1 0x10090006
+ #define __RW_MGR_CONTENT_ac_mrs3 0x100B0000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata_wl_1 0x18980000
+ #define __RW_MGR_CONTENT_ac_act_1 0x106B0000
+@@ -46,8 +46,8 @@
+ #define __RW_MGR_CONTENT_ac_init_reset_0_cke_0 0x20700000
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1_norden 0x10580008
+ #define __RW_MGR_CONTENT_ac_pre_all 0x10280400
+-#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080431
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080530
++#define __RW_MGR_CONTENT_ac_mrs0_user 0x10080471
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset 0x10080570
+ #define __RW_MGR_CONTENT_ac_read_bank_0_0 0x13580000
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_1 0x1C980008
+ #define __RW_MGR_CONTENT_ac_read_bank_0_1 0x13580008
+@@ -55,21 +55,21 @@
+ #define __RW_MGR_CONTENT_ac_write_bank_1_col_1 0x1C9B0008
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0 0x1C980000
+ #define __RW_MGR_CONTENT_ac_read_bank_1_0 0x135B0000
+-#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0024
++#define __RW_MGR_CONTENT_ac_mrs1_mirr 0x100A0006
+ #define __RW_MGR_CONTENT_ac_read_bank_1_1 0x135B0008
+ #define __RW_MGR_CONTENT_ac_des_odt_1 0x38780000
+-#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804C8
++#define __RW_MGR_CONTENT_ac_mrs0_dll_reset_mirr 0x100804E8
+ #define __RW_MGR_CONTENT_ac_zqcl 0x10380400
+ #define __RW_MGR_CONTENT_ac_write_predata 0x38F80000
+-#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080449
++#define __RW_MGR_CONTENT_ac_mrs0_user_mirr 0x10080469
+ #define __RW_MGR_CONTENT_ac_ref 0x10480000
+ #define __RW_MGR_CONTENT_ac_nop 0x30780000
+ #define __RW_MGR_CONTENT_ac_rdimm 0x10780000
+-#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090010
++#define __RW_MGR_CONTENT_ac_mrs2_mirr 0x10090218
+ #define __RW_MGR_CONTENT_ac_write_bank_0_col_0_nodata 0x18180000
+ #define __RW_MGR_CONTENT_ac_read_en 0x33780000
+ #define __RW_MGR_CONTENT_ac_mrs3_mirr 0x100B0000
+-#define __RW_MGR_CONTENT_ac_mrs2 0x100A0008
++#define __RW_MGR_CONTENT_ac_mrs2 0x100A0218
+ 
+ #define __RW_MGR_READ_B2B_WAIT2 0x6A
+ #define __RW_MGR_LFSR_WR_RD_BANK_0_WAIT 0x31
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+index e16efa1..20b4ca1 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_auto_ac_init.c
+@@ -6,16 +6,16 @@ const alt_u32 ac_rom_init[36] =
+ {
+ 	0x20700000,
+ 	0x20780000,
+-	0x10080431,
+-	0x10080530,
+-	0x10090044,
+-	0x100a0008,
++	0x10080471,
++	0x10080570,
++	0x10090006,
++	0x100a0218,
+ 	0x100b0000,
+ 	0x10380400,
+-	0x10080449,
+-	0x100804c8,
+-	0x100a0024,
+-	0x10090010,
++	0x10080469,
++	0x100804e8,
++	0x100a0006,
++	0x10090218,
+ 	0x100b0000,
+ 	0x30780000,
+ 	0x38780000,
+diff --git a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+index 52faf3f..b85b85c 100644
+--- a/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
++++ b/board/altera/socfpga_cyclone5/sdram/sequencer_defines.h
+@@ -1,28 +1,28 @@
+ #ifndef _SEQUENCER_DEFINES_H_
+ #define _SEQUENCER_DEFINES_H_
+ 
+-#define AC_ROM_MR1_MIRR 0000000100100
++#define AC_ROM_MR1_MIRR 0000000000110
+ #define AC_ROM_MR1_OCD_ENABLE
+-#define AC_ROM_MR2_MIRR 0000000010000
++#define AC_ROM_MR2_MIRR 0001000011000
+ #define AC_ROM_MR3_MIRR 0000000000000
+ #define AC_ROM_MR0_CALIB
+-#define AC_ROM_MR0_DLL_RESET_MIRR 0010011001000
+-#define AC_ROM_MR0_DLL_RESET 0010100110000
+-#define AC_ROM_MR0_MIRR 0010001001001
+-#define AC_ROM_MR0 0010000110001
+-#define AC_ROM_MR1 0000001000100
+-#define AC_ROM_MR2 0000000001000
++#define AC_ROM_MR0_DLL_RESET_MIRR 0010011101000
++#define AC_ROM_MR0_DLL_RESET 0010101110000
++#define AC_ROM_MR0_MIRR 0010001101001
++#define AC_ROM_MR0 0010001110001
++#define AC_ROM_MR1 0000000000110
++#define AC_ROM_MR2 0001000011000
+ #define AC_ROM_MR3 0000000000000
+ #define AFI_CLK_FREQ 401
+ #define AFI_RATE_RATIO 1
+ #define ARRIAVGZ 0
+ #define ARRIAV 0
+-#define AVL_CLK_FREQ 67
++#define AVL_CLK_FREQ 81
+ #define BFM_MODE 0
+ #define BURST2 0
+ #define CALIBRATE_BIT_SLIPS 0
+-#define CALIB_LFIFO_OFFSET 7
+-#define CALIB_VFIFO_OFFSET 5
++#define CALIB_LFIFO_OFFSET 11
++#define CALIB_VFIFO_OFFSET 9
+ #define CYCLONEV 1
+ #define DDR2 0
+ #define DDR3 1
+@@ -89,20 +89,20 @@
+ #define RW_MGR_MEM_CHIP_SELECT_WIDTH 1
+ #define RW_MGR_MEM_CLK_EN_WIDTH 1
+ #define RW_MGR_MEM_CONTROL_WIDTH 1
+-#define RW_MGR_MEM_DATA_MASK_WIDTH 5
+-#define RW_MGR_MEM_DATA_WIDTH 40
++#define RW_MGR_MEM_DATA_MASK_WIDTH 4
++#define RW_MGR_MEM_DATA_WIDTH 32
+ #define RW_MGR_MEM_DQ_PER_READ_DQS 8
+ #define RW_MGR_MEM_DQ_PER_WRITE_DQS 8
+-#define RW_MGR_MEM_IF_READ_DQS_WIDTH 5
+-#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 5
++#define RW_MGR_MEM_IF_READ_DQS_WIDTH 4
++#define RW_MGR_MEM_IF_WRITE_DQS_WIDTH 4
+ #define RW_MGR_MEM_NUMBER_OF_CS_PER_DIMM 1
+ #define RW_MGR_MEM_NUMBER_OF_RANKS 1
+ #define RW_MGR_MEM_ODT_WIDTH 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_READ_DQS 1
+ #define RW_MGR_MEM_VIRTUAL_GROUPS_PER_WRITE_DQS 1
+ #define RW_MGR_MR0_BL 1
+-#define RW_MGR_MR0_CAS_LATENCY 3
+-#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 5
++#define RW_MGR_MR0_CAS_LATENCY 7
++#define RW_MGR_TRUE_MEM_DATA_MASK_WIDTH 4
+ #define RW_MGR_WRITE_TO_DEBUG_READ 1.0
+ #define SKEW_CALIBRATION 0
+ #define STATIC_FULL_CALIBRATION 1
+-- 
+1.9.0
+

board/atmel/at91sam9x5ek_mmc/genimage.cfg

@@ -1,34 +0,0 @@
-# Image for SD card boot on Atmel at91sam9x5ek boards
-#
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"at91sam9g15ek.dtb",
-			"at91sam9g25ek.dtb",
-			"at91sam9g35ek.dtb",
-			"at91sam9x25ek.dtb",
-			"at91sam9x35ek.dtb",
-			"boot.bin",
-			"u-boot.bin"
-		}
-	}
-	size = 16M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/atmel/at91sam9x5ek_mmc/post-image.sh

@@ -1,20 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-echo --rootpath "${TARGET_DIR}"
-echo --tmppath "${GENIMAGE_TMP}"
-echo --inputpath "${BINARIES_DIR}"
-echo --outputpath "${BINARIES_DIR}"
-echo --config "${GENIMAGE_CFG}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/beaglebone/genimage.cfg

@@ -9,7 +9,6 @@ image boot.vfat {
 			"am335x-evmsk.dtb",
 			"am335x-bone.dtb",
 			"am335x-boneblack.dtb",
-			"am335x-bonegreen.dtb",
 		}
 	}
 	size = 16M

board/ci40/genimage.cfg

@@ -1,12 +0,0 @@
-# Minimal SD card image
-#
-
-image sdcard.img {
-  hdimage {
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-  }
-}

board/ci40/post-build.sh

@@ -1,4 +0,0 @@
-#!/bin/sh
-
-# Copy to target
-cp ${BINARIES_DIR}/vmlinux.gz.itb ${TARGET_DIR}/fitImage

board/ci40/readme.txt

@@ -1,65 +0,0 @@
-*********************
-* MIPS Creator CI40 *
-*********************
-
-This document details how to build and run a Buildroot system on the
-MIPS Creator CI40 platform. For more details about the CI40, see
-https://creatordev.io/ci40-iot-hub.html.
-
-How to build
-------------
-
-$ make ci40_defconfig
-$ make
-
-Prepare USB/MMC for boot
-------------------------
-
-On successful build, "sdcard.img" file will be created in 'output/images'
-folder.
-
-Use following command to write image to bootable device
-
-$ sudo dd if=./output/images/sdcard.img of=/dev/<your-microsd-or-usb-device>
-
-Booting from USB/MMC
---------------------
-
-The boot loader is already present in NOR flash. To boot your newly generated
-Linux and root filesystem, you need to interrupt U-Boot autoboot. Current
-U-Boot is configured with 2 seconds of boot-delay, after expiry of this
-boot-delay timeout U-Boot starts booting the default image. To interrupt
-autoboot, press any key before the boot-delay time expires, U-Boot will
-stop the autoboot process and give a U-Boot prompt. You can now boot to
-your preferred boot method as describe below:
-
-From USB
-  pistachio # run usbboot
-
-From SD-Card
-  pistachio # run mmcboot
-
-Persistent boot command
------------------------
-
-To boot automatically to your preferred boot method, use following command to
-make it persistent, for example to automatically boot to usb:
-
-  pistachio # setenv bootcmd run usbboot
-  pistachio # saveenv
-
-Flash new bootloader
---------------------
-
-The bootloader image will be available in the 'output/images' folder. To flash
-the new bootloader, copy it to the device and use the following command on the
-device:
-
-# flashcp -v u-boot-pistachio_marduk-<version>.img /dev/mtd0
-
-Online docs
------------
-
-Mostly for OpenWRT but it is applicable to Buildroot
-https://docs.creatordev.io/ci40/guides/openwrt-platform/#overview
-

board/csky/gx6605s/gdbinit

@@ -1,25 +0,0 @@
-tar jtag jtag://127.0.0.1:1025
-reset
-
-# setup CCR (Cache Config Reg)
-# 0-1:MP,2:IE,3:DE,4:WB,5:RS,6:Z,7:BE
-set $cr18 = 0x7d
-
-# vendor custom setup, double cache line & preload
-set $cr30 = 0xc
-
-# pin mux for serial8250
-set *(unsigned int *) 0xa030a14c |= (1 << 22) | (1 << 23)
-
-# pass devicetree blob
-# r2 is magic
-# r3 is address
-set $r2 = 0x20150401
-set $r3 = 0x92000000
-restore gx6605s.dtb binary 0x92000000
-
-# flush cache
-set $cr17 = 0x33
-
-load
-

board/csky/readme.txt

@@ -1,88 +0,0 @@
-C-SKY Development Kit
-
-Intro
-=====
-
-C-SKY is a CPU Architecture from www.c-sky.com and has it own instruction set.
-Just like arm and mips in linux/arch, it named as 'csky'.
-
-gx6605s develop board is made by Hangzhou Nationalchip and C-SKY.
-
-Hardware Spec:
-  * CPU: ck610 up to 594Mhz
-  * Integrate with 64MB ddr2 in SOC.
-  * Integrate with hardware Jtag.
-  * Integrate with usb-to-serial chip.
-  * USB ehci controller in SOC.
-  * Power Supply: DC 5V from two micro-usb.
-
-How to build it
-===============
-
-Configure Buildroot
--------------------
-
-The csky_gx6605s_defconfig configuration is a sample configuration with
-all that is required to bring the gx6605s Development Board:
-
-  $ make csky_gx6605s_defconfig
-
-Build everything
-----------------
-
-Note: you will need to have access to the network, since Buildroot will
-download the packages' sources.
-
-  $ make
-
-Result of the build
--------------------
-
-After building, you should obtain this tree:
-
-    output/images/
-    ├── vmlinux
-    ├── rootfs.ext2
-    └── <board name>.dtb
-
-How to run it
-=============
-
-Prepare Jtag-Server
--------------------
-
-  Download the Jtag-Server here:
-
-  https://github.com/c-sky/tools/raw/master/DebugServerConsole-linux-x86_64-V4.2.00-20161213.tar.gz
-
-  Go to the unpacked directory:
-
-  $./DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025
-
-  Perhaps you need to use "sudo", which need libusb to detect c510:b210
-
-  $ sudo ./DebugServerConsole -ddc -rstwait 1000 -prereset -port 1025
-
-Prepare USB drive
------------------
-
-  You sould determine which device associated to the usb drive
-  carefully. eg:
-
-  $ cat /proc/partitions
-   8       48    1971712 sdd
-   8       49     976720 sdd1
-
-  $ sudo dd if=rootfs.ext2 of=/dev/sdd1
-  $ sudo sync
-
-Run
----
-
-  Plug the usb drive on gx6605s dev board.
-
-  Setup the Console with the rate 115200/8-N-1.
-
-  $ cd output/images
-  $ ../host/usr/bin/csky-linux-gdb -x ../../board/csky/gx6605s/gdbinit vmlinux
-

board/grinn/liteboard/patches/linux/0001-ARM-dts-imx6ul-Add-DTS-for-liteSOM-module.patch

@@ -0,0 +1,113 @@
+From 8cbabc57257bdbf5f1cf039a265c875da8ddc2e9 Mon Sep 17 00:00:00 2001
+From: Marcin Niestroj <m.niestroj@grinn-global.com>
+Date: Fri, 21 Oct 2016 17:07:16 +0200
+Subject: [PATCH 1/2] ARM: dts: imx6ul: Add DTS for liteSOM module
+
+This is a SOM (System on Module), so it will be part of another boards.
+Hence, this is a "dtsi" file that will be included from another device
+tree files.
+
+Hardware specification:
+ * Freescale i.MX6UL SoC
+ * up to 512 MB RAM
+ * eMMC on uSDHC2
+
+Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
+Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+---
+ arch/arm/boot/dts/imx6ul-litesom.dtsi | 82 +++++++++++++++++++++++++++++++++++
+ 1 file changed, 82 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx6ul-litesom.dtsi
+
+diff --git a/arch/arm/boot/dts/imx6ul-litesom.dtsi b/arch/arm/boot/dts/imx6ul-litesom.dtsi
+new file mode 100644
+index 000000000000..461292d33417
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6ul-litesom.dtsi
+@@ -0,0 +1,82 @@
++/*
++ * Copyright 2016 Grinn
++ *
++ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License
++ *     version 2 as published by the Free Software Foundation.
++ *
++ *     This file is distributed in the hope that it will be useful
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "imx6ul.dtsi"
++
++/ {
++	model = "Grinn i.MX6UL liteSOM";
++	compatible = "grinn,imx6ul-litesom", "fsl,imx6ul";
++
++	memory {
++		reg = <0x80000000 0x20000000>;
++	};
++};
++
++&iomuxc {
++	pinctrl_usdhc2: usdhc2grp {
++		fsl,pins = <
++			MX6UL_PAD_NAND_RE_B__USDHC2_CLK	    0x10069
++			MX6UL_PAD_NAND_WE_B__USDHC2_CMD	    0x17059
++			MX6UL_PAD_NAND_DATA00__USDHC2_DATA0 0x17059
++			MX6UL_PAD_NAND_DATA01__USDHC2_DATA1 0x17059
++			MX6UL_PAD_NAND_DATA02__USDHC2_DATA2 0x17059
++			MX6UL_PAD_NAND_DATA03__USDHC2_DATA3 0x17059
++			MX6UL_PAD_NAND_DATA04__USDHC2_DATA4 0x17059
++			MX6UL_PAD_NAND_DATA05__USDHC2_DATA5 0x17059
++			MX6UL_PAD_NAND_DATA06__USDHC2_DATA6 0x17059
++			MX6UL_PAD_NAND_DATA07__USDHC2_DATA7 0x17059
++			MX6UL_PAD_NAND_ALE__USDHC2_RESET_B  0x17059
++		>;
++	};
++};
++
++&usdhc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_usdhc2>;
++	no-1-8-v;
++	non-removable;
++	keep-power-in-suspend;
++	wakeup-source;
++	bus-width = <8>;
++	status = "okay";
++};
+-- 
+2.11.0
+

board/grinn/liteboard/patches/linux/0002-ARM-dts-imx6ul-Add-DTS-for-liteBoard.patch

@@ -0,0 +1,190 @@
+From 35a8bca870bedebb9d37ad58b905863cba780f9f Mon Sep 17 00:00:00 2001
+From: Marcin Niestroj <m.niestroj@grinn-global.com>
+Date: Fri, 21 Oct 2016 17:07:17 +0200
+Subject: [PATCH 2/2] ARM: dts: imx6ul: Add DTS for liteBoard
+
+liteBoard is a development board which uses liteSOM as its base.
+
+Hardware specification:
+ * liteSOM (i.MX6UL, DRAM, eMMC)
+ * Ethernet PHY (id 0)
+ * USB host (usb_otg1)
+ * MicroSD slot (uSDHC1)
+
+Signed-off-by: Marcin Niestroj <m.niestroj@grinn-global.com>
+Reviewed-by: Fabio Estevam <fabio.estevam@nxp.com>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+---
+ arch/arm/boot/dts/Makefile             |   1 +
+ arch/arm/boot/dts/imx6ul-liteboard.dts | 147 +++++++++++++++++++++++++++++++++
+ 2 files changed, 148 insertions(+)
+ create mode 100644 arch/arm/boot/dts/imx6ul-liteboard.dts
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index c558ba75cbcc..a587ce231f83 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -420,6 +420,7 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
+ dtb-$(CONFIG_SOC_IMX6UL) += \
+ 	imx6ul-14x14-evk.dtb \
+ 	imx6ul-geam-kit.dtb \
++	imx6ul-liteboard.dtb \
+ 	imx6ul-pico-hobbit.dtb \
+ 	imx6ul-tx6ul-0010.dtb \
+ 	imx6ul-tx6ul-0011.dtb \
+diff --git a/arch/arm/boot/dts/imx6ul-liteboard.dts b/arch/arm/boot/dts/imx6ul-liteboard.dts
+new file mode 100644
+index 000000000000..6e04cb9202f4
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6ul-liteboard.dts
+@@ -0,0 +1,147 @@
++/*
++ * Copyright 2016 Grinn
++ *
++ * Author: Marcin Niestroj <m.niestroj@grinn-global.com>
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This file is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License
++ *     version 2 as published by the Free Software Foundation.
++ *
++ *     This file is distributed in the hope that it will be useful
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "imx6ul-litesom.dtsi"
++
++/ {
++	model = "Grinn i.MX6UL liteBoard";
++	compatible = "grinn,imx6ul-liteboard", "grinn,imx6ul-litesom",
++		     "fsl,imx6ul";
++
++	chosen {
++		stdout-path = &uart1;
++	};
++
++	reg_usb_otg1_vbus: regulator-usb-otg1-vbus {
++		compatible = "regulator-fixed";
++		pinctrl-names = "default";
++		pinctrl-0 = <&pinctrl_usb_otg1_vbus>;
++		regulator-name = "usb_otg1_vbus";
++		regulator-min-microvolt = <5000000>;
++		regulator-max-microvolt = <5000000>;
++		gpio = <&gpio2 8 GPIO_ACTIVE_LOW>;
++	};
++};
++
++&iomuxc {
++	pinctrl_enet1: enet1grp {
++		fsl,pins = <
++			MX6UL_PAD_GPIO1_IO07__ENET1_MDC		0x1b0b0
++			MX6UL_PAD_GPIO1_IO06__ENET1_MDIO	0x1b0b0
++			MX6UL_PAD_ENET1_RX_EN__ENET1_RX_EN	0x1b0b0
++			MX6UL_PAD_ENET1_RX_ER__ENET1_RX_ER	0x1b0b0
++			MX6UL_PAD_ENET1_RX_DATA0__ENET1_RDATA00 0x1b0b0
++			MX6UL_PAD_ENET1_RX_DATA1__ENET1_RDATA01 0x1b0b0
++			MX6UL_PAD_ENET1_TX_EN__ENET1_TX_EN	0x1b0b0
++			MX6UL_PAD_ENET1_TX_DATA0__ENET1_TDATA00 0x1b0b0
++			MX6UL_PAD_ENET1_TX_DATA1__ENET1_TDATA01 0x1b0b0
++			MX6UL_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x4001b031
++		>;
++	};
++
++	pinctrl_uart1: uart1grp {
++		fsl,pins = <
++			MX6UL_PAD_UART1_TX_DATA__UART1_DCE_TX	0x1b0b1
++			MX6UL_PAD_UART1_RX_DATA__UART1_DCE_RX	0x1b0b1
++		>;
++	};
++
++	pinctrl_usdhc1: usdhc1grp {
++		fsl,pins = <
++			MX6UL_PAD_UART1_RTS_B__GPIO1_IO19	0x17059
++			MX6UL_PAD_SD1_CMD__USDHC1_CMD		0x17059
++			MX6UL_PAD_SD1_CLK__USDHC1_CLK		0x10071
++			MX6UL_PAD_SD1_DATA0__USDHC1_DATA0	0x17059
++			MX6UL_PAD_SD1_DATA1__USDHC1_DATA1	0x17059
++			MX6UL_PAD_SD1_DATA2__USDHC1_DATA2	0x17059
++			MX6UL_PAD_SD1_DATA3__USDHC1_DATA3	0x17059
++		>;
++	};
++
++	pinctrl_usb_otg1_vbus: usb-otg1-vbus {
++		fsl,pins = <
++			MX6UL_PAD_ENET2_RX_DATA0__GPIO2_IO08	0x79
++		>;
++	};
++};
++
++&fec1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_enet1>;
++	phy-mode = "rmii";
++	phy-handle = <&ethphy0>;
++	status = "okay";
++
++	mdio {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		ethphy0: ethernet-phy@0 {
++			reg = <0>;
++		};
++	};
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_uart1>;
++	status = "okay";
++};
++
++&usbotg1 {
++	vbus-supply = <&reg_usb_otg1_vbus>;
++	dr_mode = "host";
++	status = "okay";
++};
++
++&usdhc1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_usdhc1>;
++	cd-gpios = <&gpio1 19 GPIO_ACTIVE_LOW>;
++	no-1-8-v;
++	keep-power-in-suspend;
++	wakeup-source;
++	status = "okay";
++};
+-- 
+2.11.0
+

board/lemaker/bananapro/boot.cmd

@@ -1,5 +0,0 @@
-setenv fdt_high ffffffff
-setenv bootargs console=ttyS0,115200 earlyprintk root=/dev/mmcblk0p2 rootwait
-fatload mmc 0 $kernel_addr_r zImage
-fatload mmc 0 $fdt_addr_r sun7i-a20-bananapro.dtb
-bootz $kernel_addr_r - $fdt_addr_r

board/lemaker/bananapro/genimage.cfg

@@ -1,37 +0,0 @@
-# Minimal SD card image for the Banana Pro
-# Based in the Orange Pi genimage.cfg
-
-image boot.vfat {
-	vfat {
-		files = {
-			"zImage",
-			"sun7i-a20-bananapro.dtb",
-			"boot.scr"
-		}
-	}
-	size = 10M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition u-boot {
-		in-partition-table = "no"
-		image = "u-boot-sunxi-with-spl.bin"
-		offset = 8192
-		size = 1040384 # 1MB - 8192
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/lemaker/bananapro/linux-wifi.fragment

@@ -1,23 +0,0 @@
-# Networking support
-CONFIG_WIRELESS=y
-CONFIG_CFG80211=y
-CONFIG_CFG80211_WEXT=y
-
-# Network device support
-CONFIG_WLAN=y
-CONFIG_WLAN_VENDOR_BROADCOM=y
-CONFIG_BRCMFMAC=m
-# CONFIG_WLAN_VENDOR_ADMTEK is not set
-# CONFIG_WLAN_VENDOR_ATH is not set
-# CONFIG_WLAN_VENDOR_ATMEL is not set
-# CONFIG_WLAN_VENDOR_CISCO is not set
-# CONFIG_WLAN_VENDOR_INTEL is not set
-# CONFIG_WLAN_VENDOR_INTERSIL is not set
-# CONFIG_WLAN_VENDOR_MARVELL is not set
-# CONFIG_WLAN_VENDOR_MEDIATEK is not set
-# CONFIG_WLAN_VENDOR_RALINK is not set
-# CONFIG_WLAN_VENDOR_REALTEK is not set
-# CONFIG_WLAN_VENDOR_RSI is not set
-# CONFIG_WLAN_VENDOR_ST is not set
-# CONFIG_WLAN_VENDOR_TI is not set
-# CONFIG_WLAN_VENDOR_ZYDAS is not set

board/lemaker/bananapro/patches/linux/0001-ARM-dts-sun7i-Enable-audio-codec-on-Banana-Pro.patch

@@ -1,35 +0,0 @@
-From 1647fe31882a105cef4c99770e4ec8ea47c5c653 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?J=C3=B6rg=20Krause?= <joerg.krause@embedded.rocks>
-Date: Wed, 4 Jan 2017 15:22:50 +0100
-Subject: [PATCH 1/1] ARM: dts: sun7i: Enable audio codec on Banana Pro
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-This commit enables the on-chip audio codec present on the A20 SoC
-on the Banana Pro board.
-
-Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 4 ++++
- 1 file changed, 4 insertions(+)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-index 19d63d4049de..03799c647e13 100644
---- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-@@ -104,6 +104,10 @@
- 	status = "okay";
- };
- 
-+&codec {
-+	status = "okay";
-+};
-+
- &ehci0 {
- 	status = "okay";
- };
--- 
-2.11.0
-

board/lemaker/bananapro/patches/linux/0002-ARM-dts-sun7i-Add-wifi-dt-node-on-Banana-Pro.patch

@@ -1,85 +0,0 @@
-From f2cb904f074bc7e90be475488872a82270e9bae7 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?J=C3=B6rg=20Krause?= <joerg.krause@embedded.rocks>
-Date: Mon, 9 Jan 2017 21:36:38 +0100
-Subject: [PATCH 2/2] ARM: dts: sun7i: Add wifi dt node on Banana Pro
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-The Banana Pro has an AMPAK AP6181 WiFi+Bluetooth module. The WiFi part
-is a BCM43362 IC connected to MMC3 of the A20 SoC via SDIO. The IC also
-takes a power enable signal via GPIO.
-
-This commit adds a device-tree node to power it up, so the mmc subsys
-can scan it, and enables the mmc controller which is connected to it.
-
-As the wifi enable pin of the AP6181 module is not really a regulator,
-switch the mmc3 node to the mmc-pwrseq framework for controlling it.
-This more accurately reflectes how the hardware actually works.
-
-Signed-off-by: Jörg Krause <joerg.krause@embedded.rocks>
-Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
----
- arch/arm/boot/dts/sun7i-a20-bananapro.dts | 29 +++++++++++++++++------------
- 1 file changed, 17 insertions(+), 12 deletions(-)
-
-diff --git a/arch/arm/boot/dts/sun7i-a20-bananapro.dts b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-index 03799c647e13..83516bc81225 100644
---- a/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-+++ b/arch/arm/boot/dts/sun7i-a20-bananapro.dts
-@@ -76,6 +76,13 @@
- 		};
- 	};
- 
-+	wifi_pwrseq: wifi-pwrseq {
-+		compatible = "mmc-pwrseq-simple";
-+		pinctrl-names = "default";
-+		pinctrl-0 = <&vmmc3_pin_bananapro>;
-+		reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
-+	};
-+
- 	reg_gmac_3v3: gmac-3v3 {
- 		compatible = "regulator-fixed";
- 		pinctrl-names = "default";
-@@ -87,17 +94,6 @@
- 		enable-active-high;
- 		gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
- 	};
--
--	reg_vmmc3: vmmc3 {
--		compatible = "regulator-fixed";
--		pinctrl-names = "default";
--		pinctrl-0 = <&vmmc3_pin_bananapro>;
--		regulator-name = "vmmc3";
--		regulator-min-microvolt = <3300000>;
--		regulator-max-microvolt = <3300000>;
--		enable-active-high;
--		gpio = <&pio 7 22 GPIO_ACTIVE_HIGH>;
--	};
- };
- 
- &ahci {
-@@ -170,10 +166,19 @@
- &mmc3 {
- 	pinctrl-names = "default";
- 	pinctrl-0 = <&mmc3_pins_a>;
--	vmmc-supply = <&reg_vmmc3>;
-+	vmmc-supply = <&reg_vcc3v3>;
-+	mmc-pwrseq = <&wifi_pwrseq>;
- 	bus-width = <4>;
- 	non-removable;
- 	status = "okay";
-+
-+	brcmf: bcrmf@1 {
-+		reg = <1>;
-+		compatible = "brcm,bcm4329-fmac";
-+		interrupt-parent = <&pio>;
-+		interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
-+		interrupt-names = "host-wake";
-+	};
- };
- 
- &ohci0 {
--- 
-2.11.0
-

board/lemaker/bananapro/post-build.sh

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-# Remove all but the brcmfmac43362 firmware files
-find $TARGET_DIR/lib/firmware/brcm -type f -not -name "brcmfmac43362*" -delete
-
-BOARD_DIR="$(dirname $0)"
-MKIMAGE=$HOST_DIR/usr/bin/mkimage
-BOOT_CMD=$BOARD_DIR/boot.cmd
-BOOT_CMD_H=$BINARIES_DIR/boot.scr
-
-# U-Boot script
-$MKIMAGE -C none -A arm -T script -d $BOOT_CMD $BOOT_CMD_H

board/lemaker/bananapro/post-image.sh

@@ -1,16 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                           \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"
-
-exit $?

board/lemaker/bananapro/readme.txt

@@ -1,62 +0,0 @@
-Banana Pro
-
-Intro
-=====
-
-This default configuration will allow you to start experimenting with the
-Buildroot environment for the Banana Pro. With the current configuration
-it will bring-up the board, and allow access through the serial console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-  $ make bananapro_defconfig
-
-Compile everything and build the SD card image:
-
-  $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto an SD card with "dd":
-
-  $ dd if=output/images/sdcard.img of=/dev/sdX
-
-Notes:
-  - replace 'sdX' with the actual device with your micro SD card
-  - you may need to be root to do that (use 'sudo')
-
-Insert the micro SD card in your Banana Pro and power it up. The console
-is on the debug TTL UART, 115200 8N1.
-
-Ethernet
-==========
-
-  # udhcpc -i eth0
-
-Wifi
-==========
-
-  # wpa_passphrase YOUR_SSID >> /etc/wpa_supplicant.conf
-  (enter the wifi password and press enter)
-  # wpa_supplicant -i wlan0 -c /etc/wpa_supplicant.conf -B
-  # udhcpc -i wlan0
-
-Note:
-  - replace 'YOUR_SSID' with the actual SSID from your access point
-
-Audio
-==========
-
-Connect a headphone to the 3.5mm jack (TRRS). Note, that the Banana Pro
-has an on-board microphone, too.
-
-  # amixer cset name='Power Amplifier DAC Playback Switch' on
-  # amixer cset name='Power Amplifier Mute Switch' on
-  # amixer cset name='Power Amplifier Volume' 42

board/lemaker/bananapro/rootfs_overlay/lib/firmware/brcm/brcmfmac43362-sdio.txt

@@ -1,56 +0,0 @@
-#AP6210_NVRAM_V1.2_03192013
-manfid=0x2d0
-prodid=0x492
-vendid=0x14e4
-devid=0x4343
-boardtype=0x0598
-
-# Board Revision is P307, same nvram file can be used for P304, P305, P306 and P307 as the tssi pa params used are same
-#Please force the automatic RX PER data to the respective board directory if not using P307 board, for e.g. for P305 boards force the data into the following directory /projects/BCM43362/a1_labdata/boardtests/results/sdg_rev0305
-boardrev=0x1307
-boardnum=777
-xtalfreq=26000
-boardflags=0x80201
-boardflags2=0x80
-sromrev=3
-wl0id=0x431b
-macaddr=00:90:4c:07:71:12
-aa2g=1
-ag0=2
-maxp2ga0=74
-cck2gpo=0x2222
-ofdm2gpo=0x44444444
-mcs2gpo0=0x6666
-mcs2gpo1=0x6666
-pa0maxpwr=56
-
-#P207 PA params
-#pa0b0=5447
-#pa0b1=-658
-#pa0b2=-175
-
-#Same PA params for P304,P305, P306, P307
-
-pa0b0=5447
-pa0b1=-607
-pa0b2=-160
-pa0itssit=62
-pa1itssit=62
-
-
-cckPwrOffset=5
-ccode=0
-rssismf2g=0xa
-rssismc2g=0x3
-rssisav2g=0x7
-triso2g=0
-noise_cal_enable_2g=0
-noise_cal_po_2g=0
-swctrlmap_2g=0x04040404,0x02020202,0x02020202,0x010101,0x1ff
-temp_add=29767
-temp_mult=425
-
-btc_flags=0x6
-btc_params0=5000
-btc_params1=1000
-btc_params6=63

board/minnowboard/grub-minnowboard.cfg

@@ -0,0 +1,6 @@
+set default="0"
+set timeout="5"
+
+menuentry "Buildroot" {
+	linux /bzImage root=/dev/mmcblk0p2 rootwait console=ttyPCH0,115200
+}

board/minnowboard/linux-3.8.config

@@ -0,0 +1,172 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_SYSVIPC=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_BSD_PROCESS_ACCT=y
+CONFIG_BSD_PROCESS_ACCT_V3=y
+CONFIG_RCU_FANOUT=32
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_CGROUPS=y
+CONFIG_CGROUP_DEBUG=y
+CONFIG_CGROUP_FREEZER=y
+CONFIG_CGROUP_DEVICE=y
+CONFIG_CPUSETS=y
+CONFIG_CGROUP_CPUACCT=y
+CONFIG_RESOURCE_COUNTERS=y
+CONFIG_MEMCG=y
+CONFIG_MEMCG_SWAP=y
+CONFIG_MEMCG_KMEM=y
+CONFIG_CGROUP_SCHED=y
+CONFIG_RT_GROUP_SCHED=y
+CONFIG_BLK_CGROUP=y
+CONFIG_NAMESPACES=y
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_EMBEDDED=y
+CONFIG_PROFILING=y
+CONFIG_OPROFILE=y
+CONFIG_KPROBES=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+CONFIG_PARTITION_ADVANCED=y
+CONFIG_SMP=y
+CONFIG_MATOM=y
+CONFIG_SCHED_SMT=y
+CONFIG_PREEMPT=y
+CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y
+CONFIG_X86_CHECK_BIOS_CORRUPTION=y
+# CONFIG_MTRR_SANITIZER is not set
+CONFIG_EFI=y
+CONFIG_EFI_STUB=y
+CONFIG_HZ_1000=y
+CONFIG_PM_RUNTIME=y
+CONFIG_PM_DEBUG=y
+CONFIG_PM_ADVANCED_DEBUG=y
+CONFIG_CPU_FREQ=y
+CONFIG_CPU_FREQ_GOV_ONDEMAND=y
+CONFIG_X86_ACPI_CPUFREQ=y
+CONFIG_INTEL_IDLE=y
+CONFIG_PCI_MMCONFIG=y
+CONFIG_PCIEPORTBUS=y
+CONFIG_PCI_MSI=y
+CONFIG_HOTPLUG_PCI=y
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_XFRM_SUB_POLICY=y
+CONFIG_NET_KEY_MIGRATE=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_ADVANCED_ROUTER=y
+CONFIG_IP_MULTIPLE_TABLES=y
+CONFIG_IP_ROUTE_MULTIPATH=y
+CONFIG_IP_ROUTE_VERBOSE=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+CONFIG_IP_PNP_BOOTP=y
+CONFIG_IP_PNP_RARP=y
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+CONFIG_FW_LOADER=m
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_CRYPTOLOOP=m
+CONFIG_BLK_DEV_RAM=y
+CONFIG_PCH_PHUB=m
+CONFIG_BLK_DEV_SD=y
+CONFIG_BLK_DEV_SR=y
+CONFIG_CHR_DEV_SG=y
+CONFIG_ATA=y
+CONFIG_SATA_AHCI=y
+CONFIG_NETDEVICES=y
+CONFIG_DUMMY=m
+CONFIG_NETCONSOLE=y
+CONFIG_TUN=m
+CONFIG_PCH_GBE=m
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO_POLLED=y
+# CONFIG_MOUSE_PS2 is not set
+# CONFIG_SERIO_I8042 is not set
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_PCH_UART=y
+CONFIG_SERIAL_PCH_UART_CONSOLE=y
+CONFIG_GEN_RTC=y
+CONFIG_GEN_RTC_X=y
+CONFIG_HPET=y
+CONFIG_I2C=y
+CONFIG_I2C_CHARDEV=m
+CONFIG_I2C_EG20T=m
+CONFIG_SPI=y
+CONFIG_SPI_GPIO=m
+CONFIG_SPI_TOPCLIFF_PCH=m
+CONFIG_SPI_SPIDEV=m
+CONFIG_GPIOLIB=y
+CONFIG_DEBUG_GPIO=y
+CONFIG_GPIO_SYSFS=y
+CONFIG_GPIO_GENERIC_PLATFORM=y
+CONFIG_GPIO_SCH=y
+CONFIG_GPIO_PCH=y
+CONFIG_WATCHDOG=y
+CONFIG_SOFT_WATCHDOG=m
+CONFIG_AGP=m
+CONFIG_DRM=m
+CONFIG_FB=y
+CONFIG_FB_EFI=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_SOUND=m
+CONFIG_SND=m
+CONFIG_SND_HDA_INTEL=m
+CONFIG_USB=y
+CONFIG_USB_SUSPEND=y
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_EHCI_ROOT_HUB_TT=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_GADGET=m
+CONFIG_USB_EG20T=m
+CONFIG_MMC=y
+CONFIG_MMC_SDHCI=y
+CONFIG_MMC_SDHCI_PCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_ONESHOT=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_BACKLIGHT=y
+CONFIG_LEDS_TRIGGER_CPU=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+CONFIG_DMADEVICES=y
+CONFIG_PCH_DMA=y
+CONFIG_MINNOWBOARD=y
+CONFIG_MINNOWBOARD_GPIO=m
+CONFIG_MINNOWBOARD_KEYS=m
+CONFIG_EFI_VARS=y
+CONFIG_EXT4_FS=y
+CONFIG_EXT4_FS_POSIX_ACL=y
+CONFIG_EXT4_FS_SECURITY=y
+CONFIG_FANOTIFY=y
+CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y
+CONFIG_ISO9660_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_PROC_KCORE=y
+CONFIG_TMPFS=y
+CONFIG_TMPFS_POSIX_ACL=y
+CONFIG_CONFIGFS_FS=m
+CONFIG_NFS_FS=y
+CONFIG_NFS_V4=y
+CONFIG_ROOT_NFS=y
+CONFIG_PRINTK_TIME=y
+CONFIG_FRAME_WARN=1024
+CONFIG_TIMER_STATS=y
+CONFIG_LATENCYTOP=y
+CONFIG_BLK_DEV_IO_TRACE=y

board/minnowboard/post-build.sh

@@ -1,6 +1,8 @@
 #!/bin/sh
+# args from BR2_ROOTFS_POST_SCRIPT_ARGS
+# $2    board name
 
-cp -v board/minnowboard/grub.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
+cp -v board/minnowboard/grub-${2}.cfg ${BINARIES_DIR}/efi-part/EFI/BOOT/grub.cfg
 
 # Add a console on tty1
 if [ -e ${TARGET_DIR}/etc/inittab ]; then

board/minnowboard/readme.txt

@@ -1,10 +1,14 @@
-How to get started with the MinnowBoard MAX
-===========================================
+How to get started with the MinnowBoard (MAX)
+=============================================
 
 1. Build
 
   Apply the defconfig:
 
+  $ make minnowboard_defconfig
+
+  Or, for the Minnowboard MAX board:
+
   $ make minnowboard_max_defconfig
 
   Add any additional packages required and build:
@@ -14,7 +18,7 @@ How to get started with the MinnowBoard MAX
 2. Write the SD card
 
   The build process will create a SD card image in output/images.
-  Write the image to an mSD card, insert into the MinnowBoard MAX
+  Write the image to an mSD card, insert into the MinnowBoard
   and power the board on.
 
   $ dd if=output/images/sdcard.img of=/dev/mmcblk0; sync

board/nanopi-neo/readme.txt

@@ -2,7 +2,7 @@ Intro
 =====
 
 The instructions herein are valid for the FriendlyARM NanoPi NEO,
-both the 256MiB and 512MiB versions. They should also work for the
+both the 256MiB and 512MiB versions. They should also work the the
 NanoPi NEO Air, but this is untested so far.
 
 The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
@@ -14,8 +14,9 @@ The FriendlyARM Nanopi NEO is a 4x4cm² board with an Allwiner H3 SoC:
   - 10/100 ethernet MAC
   - GPIOs, SPI, I2c...
 
-Support for the Nanopi NEO in U-Boot and Linux is very recent, so only
-core, basic features are available.
+Support for the Nanopi NEO in U-Boot and Linux is very recent, so
+much so that we have to use an -rc tag for U-Boot and a special
+Linux tree.
 
 Unfortunately, support for the ethernet MAC and the USB OTG are not
 yet upstream, but are being actively worked on.

board/nexbox/a95x/boot.txt

@@ -1,11 +0,0 @@
-setenv bootargs console=ttyAML0,115200 earlyprintk root=/dev/mmcblk1p2 rootwait
-
-fatload mmc 0:1 0x01080000 uImage
-
-if itest.s "${aml_dt}" == "gxl_p212_2g"; then
-	fatload mmc 0:1 $dtb_mem_addr meson-gxl-nexbox-a95x.dtb
-else
-	fatload mmc 0:1 $dtb_mem_addr meson-gxbb-nexbox-a95x.dtb
-fi
-
-bootm 0x1080000 - $dtb_mem_addr

board/nexbox/a95x/genimage.cfg

@@ -1,28 +0,0 @@
-image boot.vfat {
-	vfat {
-		files = {
-			"uImage",
-			"meson-gxbb-nexbox-a95x.dtb",
-			"meson-gxl-nexbox-a95x.dtb",
-			"boot.scr"
-		}
-	}
-	size = 32M
-}
-
-image sdcard.img {
-	hdimage {
-	}
-
-	partition boot {
-		partition-type = 0xC
-		bootable = "true"
-		image = "boot.vfat"
-	}
-
-	partition rootfs {
-		partition-type = 0x83
-		image = "rootfs.ext4"
-		size = 512M
-	}
-}

board/nexbox/a95x/post-build.sh

@@ -1,12 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-MKIMAGE=$HOST_DIR/usr/bin/mkimage
-
-$MKIMAGE -C none -A arm64 -T script -d $BOARD_DIR/boot.txt $BINARIES_DIR/boot.scr
-
-# vendor u-boot uses uImage
-if [ -e $BINARIES_DIR/Image ]; then
-    $MKIMAGE -A arm64 -O linux -T kernel -C none -a 0x1080000 -e 0x1080000 \
-	     -n linux -d $BINARIES_DIR/Image $BINARIES_DIR/uImage
-fi

board/nexbox/a95x/post-image.sh

@@ -1,14 +0,0 @@
-#!/bin/sh
-
-BOARD_DIR="$(dirname $0)"
-GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
-GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
-
-rm -rf "${GENIMAGE_TMP}"
-
-genimage                               \
-	--rootpath "${TARGET_DIR}"     \
-	--tmppath "${GENIMAGE_TMP}"    \
-	--inputpath "${BINARIES_DIR}"  \
-	--outputpath "${BINARIES_DIR}" \
-	--config "${GENIMAGE_CFG}"

board/nexbox/a95x/readme.txt

@@ -1,48 +0,0 @@
-Nexbox A95X
-
-Intro
-=====
-
-Nexbox A95X is a low cost Android STB based around an Amlogic s905(x) SoC
-(quad A53), 8/16GB eMMC and 1/2GB RAM.  To use this defconfig, wires to the
-internal UART solder pads must be added.  See the linux-meson page for
-details:
-
-http://linux-meson.com/doku.php?id=nexbox_a95x_s905
-
-Both the s905 (gxbb) and s905x (gxl) variant is supported.
-
-This default configuration will allow you to start experimenting with the
-buildroot environment for the A95X.  With the current configuration it will
-bring-up the board from microSD, and allow access through the serial
-console.
-
-How to build it
-===============
-
-Configure Buildroot:
-
-    $ make nexbox_a95x_defconfig
-
-Compile everything and build the SD card image:
-
-    $ make
-
-How to write the SD card
-========================
-
-Once the build process is finished you will have an image called "sdcard.img"
-in the output/images/ directory.
-
-Copy the bootable "sdcard.img" onto a microSD card with "dd":
-
-  $ sudo dd if=output/images/sdcard.img of=/dev/sdX
-
-How to boot
-===========
-
-Insert microSD card and connect serial cable. Power board and stop
-U-Boot by pressing any key. Boot the system by typing:
-
-fatload mmc 0:1 0x1070000 boot.scr
-autoscr 0x1070000

board/qemu/xtensa-lx60/linux-4.8-nommu.config

@@ -6,11 +6,10 @@ CONFIG_XTENSA_VARIANT_CUSTOM_NAME="dc233c"
 # CONFIG_XTENSA_VARIANT_MMU is not set
 CONFIG_XTENSA_UNALIGNED_USER=y
 CONFIG_PREEMPT=y
-CONFIG_KERNEL_LOAD_ADDRESS=0x00003000
 # CONFIG_PCI is not set
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8 memmap=0x04000000@0"
+CONFIG_CMDLINE="earlycon=uart8250,mmio32,0xfd050020,115200n8 console=ttyS0,115200n8"
 CONFIG_DEFAULT_MEM_START=0x00000000
 CONFIG_BINFMT_FLAT=y
 CONFIG_NET=y

board/qemu/xtensa-lx60/linux-4.8.config

@@ -5,7 +5,7 @@ CONFIG_XTENSA_VARIANT_DC233C=y
 CONFIG_INITIALIZE_XTENSA_MMU_INSIDE_VMLINUX=y
 CONFIG_XTENSA_PLATFORM_XTFPGA=y
 CONFIG_CMDLINE_BOOL=y
-CONFIG_CMDLINE="console=ttyS0,38400 memmap=0x04000000@0"
+CONFIG_CMDLINE="console=ttyS0,38400"
 # CONFIG_COMPACTION is not set
 # CONFIG_BOUNCE is not set
 # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set

board/raspberrypi/genimage-raspberrypi0.cfg

@@ -2,7 +2,6 @@ image boot.vfat {
   vfat {
     files = {
       "bcm2708-rpi-b-plus.dtb",
-      "bcm2708-rpi-0-w.dtb",
       "rpi-firmware/bootcode.bin",
       "rpi-firmware/cmdline.txt",
       "rpi-firmware/config.txt",

board/raspberrypi/genimage-raspberrypi3-64.cfg

@@ -1,31 +0,0 @@
-image boot.vfat {
-  vfat {
-    files = {
-      "bcm2710-rpi-3-b.dtb",
-      "bcm2837-rpi-3-b.dtb",
-      "rpi-firmware/bootcode.bin",
-      "rpi-firmware/cmdline.txt",
-      "rpi-firmware/config.txt",
-      "rpi-firmware/fixup.dat",
-      "rpi-firmware/start.elf",
-      "Image"
-    }
-  }
-  size = 32M
-}
-
-image sdcard.img {
-  hdimage {
-  }
-
-  partition boot {
-    partition-type = 0xC
-    bootable = "true"
-    image = "boot.vfat"
-  }
-
-  partition rootfs {
-    partition-type = 0x83
-    image = "rootfs.ext4"
-  }
-}

board/raspberrypi/genimage-raspberrypi3.cfg

@@ -2,7 +2,6 @@ image boot.vfat {
   vfat {
     files = {
       "bcm2710-rpi-3-b.dtb",
-      "bcm2710-rpi-cm3.dtb",
       "rpi-firmware/bootcode.bin",
       "rpi-firmware/cmdline.txt",
       "rpi-firmware/config.txt",

board/raspberrypi/post-image.sh

@@ -13,26 +13,6 @@ case "${2}" in
 
 # fixes rpi3 ttyAMA0 serial console
 dtoverlay=pi3-miniuart-bt
-__EOF__
-	fi
-	;;
-	--aarch64)
-	# Run a 64bits kernel (armv8)
-	sed -e '/^kernel=/s,=.*,=Image,' -i "${BINARIES_DIR}/rpi-firmware/config.txt"
-	if ! grep -qE '^arm_control=0x200' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
-		cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
-
-# enable 64bits support
-arm_control=0x200
-__EOF__
-	fi
-
-	# Enable uart console
-	if ! grep -qE '^enable_uart=1' "${BINARIES_DIR}/rpi-firmware/config.txt"; then
-		cat << __EOF__ >> "${BINARIES_DIR}/rpi-firmware/config.txt"
-
-# enable rpi3 ttyS0 serial console
-enable_uart=1
 __EOF__
 	fi
 	;;

board/raspberrypi3-64

@@ -1 +0,0 @@
-raspberrypi

board/stmicroelectronics/stm32f429-disco/flash.sh

@@ -1,20 +1,14 @@
 #!/bin/bash
 
 OUTPUT_DIR=$1
-BOARD_NAME=${2:-stm32f429discovery}
 
 if ! test -d "${OUTPUT_DIR}" ; then
     echo "ERROR: no output directory specified."
-    echo "Usage: $0 OUTPUT_DIR BOARD_NAME"
-    echo ""
-    echo "Arguments:"
-    echo "    OUTPUT_DIR    The Buildroot output directory."
-    echo "    BOARD_NAME    One of the available boards among:"
-    echo "                  stm32f429discovery, stm32f429disc1"
+    echo "Usage: $0 OUTPUT_DIR"
     exit 1
 fi
 
-${OUTPUT_DIR}/host/usr/bin/openocd -f board/${BOARD_NAME}.cfg \
+${OUTPUT_DIR}/host/usr/bin/openocd -f board/stm32f429discovery.cfg \
   -c "init" \
   -c "reset init" \
   -c "flash probe 0" \

board/stmicroelectronics/stm32f429-disco/readme.txt

@@ -4,12 +4,6 @@ STM32F429 Discovery
 This tutorial describes how to use the predefined Buildroot
 configuration for the STM32F429 Discovery evaluation platform.
 
-Supported HW
-------------
-
- - STM32F429I-DISCO evaluation board
- - STM32F429I-DISC1 evaluation board
-
 Building
 --------
 
@@ -30,8 +24,7 @@ The UART is configured at 115200.
 Flashing
 --------
 
-  ./board/stmicroelectronics/stm32f429-disco/flash.sh output/ \
-      {stm32f429discovery|stm32f429disc1}
+  ./board/stmicroelectronics/stm32f429-disco/flash.sh output/
 
 It will flash the minimal bootloader, the Device Tree Blob, and the
 kernel image which includes the root filesystem as initramfs.

board/stmicroelectronics/stm32f469-disco/patches/openocd/0001-add-config.patch

@@ -0,0 +1,37 @@
+From 26045588f462476cee356d15a24944d6c26befb4 Mon Sep 17 00:00:00 2001
+From: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+Date: Sat, 24 Oct 2015 00:13:38 +0200
+Subject: [PATCH] tcl: add STM32F469 discovery board config
+
+Change-Id: Iad7ee06330b3259ea0ce0d174dfdade6785913eb
+Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+Reviewed-on: http://openocd.zylin.com/3043
+Tested-by: jenkins
+Reviewed-by: Antonio Borneo <borneo.antonio@gmail.com>
+Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
+---
+ tcl/board/stm32f469discovery.cfg | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
+ create mode 100644 tcl/board/stm32f469discovery.cfg
+
+diff --git a/tcl/board/stm32f469discovery.cfg b/tcl/board/stm32f469discovery.cfg
+new file mode 100644
+index 0000000..eecfe33
+--- /dev/null
++++ b/tcl/board/stm32f469discovery.cfg
+@@ -0,0 +1,12 @@
++#
++# This is an STM32F469 discovery board with a single STM32F469NI chip.
++# http://www.st.com/web/catalog/tools/FM116/CL1620/SC959/SS1532/LN1848/PF262395
++#
++
++source [find interface/stlink-v2-1.cfg]
++
++transport select hla_swd
++
++source [find target/stm32f4x.cfg]
++
++reset_config srst_only
+-- 
+1.9.1
+

board/stmicroelectronics/stm32f469-disco/patches/openocd/0002-flash-nor.patch

@@ -0,0 +1,37 @@
+From 3e219648c80a27f0519003f3b088cbb846e255d8 Mon Sep 17 00:00:00 2001
+From: Maxime Coquelin <maxime.coquelin@st.com>
+Date: Sat, 24 Oct 2015 00:03:54 +0200
+Subject: [PATCH] flash/nor/stm32f2x: Add STM32F469 part
+
+Change-Id: I4e13ceb0ba954dc2fea059ddeef10109be938c9c
+Signed-off-by: Maxime Coquelin <mcoquelin.stm32@gmail.com>
+Reviewed-on: http://openocd.zylin.com/3042
+Tested-by: jenkins
+Reviewed-by: Freddie Chopin <freddie.chopin@gmail.com>
+---
+ src/flash/nor/stm32f2x.c | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/src/flash/nor/stm32f2x.c b/src/flash/nor/stm32f2x.c
+index 2130444..89fc75d 100644
+--- a/src/flash/nor/stm32f2x.c
++++ b/src/flash/nor/stm32f2x.c
+@@ -790,6 +790,7 @@ static int stm32x_probe(struct flash_bank *bank)
+ 		max_flash_size_in_kb = 1024;
+ 		break;
+ 	case 0x419:
++	case 0x434:
+ 		max_flash_size_in_kb = 2048;
+ 		break;
+ 	case 0x423:
+@@ -952,6 +953,7 @@ static int get_stm32x_info(struct flash_bank *bank, char *buf, int buf_size)
+ 
+ 	case 0x413:
+ 	case 0x419:
++	case 0x434:
+ 		device_str = "STM32F4xx";
+ 
+ 		switch (rev_id) {
+-- 
+1.9.1
+

board/synopsys/axs10x/patches/u-boot/0001-axs103-Clean-up-smp_kick_all_cpus.patch

@@ -1,48 +0,0 @@
-From ee5a5a51780bcb17e5240335ddfa9c98a0e6f890 Mon Sep 17 00:00:00 2001
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Date: Thu, 30 Mar 2017 19:18:30 +0300
-Subject: [PATCH] axs103: Clean-up smp_kick_all_cpus()
-
- * Rely on default pulse polarity value
- * Don't mess with "multicore" value as it doesn't affect execution
-
-In essence we now do a bare minimal stuff:
- 1) Select HS38x2_1 with CORE_SEL=1 bits
- 2) Select "manual" core start (via CREG) with START_MODE=0
- 3) Generate cpu_start pulse with START=1
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
----
- board/synopsys/axs10x/axs10x.c | 12 +++++-------
- 1 file changed, 5 insertions(+), 7 deletions(-)
-
-diff --git a/board/synopsys/axs10x/axs10x.c b/board/synopsys/axs10x/axs10x.c
-index a5e774b2cf7b..57c790220f71 100644
---- a/board/synopsys/axs10x/axs10x.c
-+++ b/board/synopsys/axs10x/axs10x.c
-@@ -61,16 +61,14 @@ void smp_kick_all_cpus(void)
- {
- /* CPU start CREG */
- #define AXC003_CREG_CPU_START	0xF0001400
--
- /* Bits positions in CPU start CREG */
- #define BITS_START	0
--#define BITS_POLARITY	8
-+#define BITS_START_MODE	4
- #define BITS_CORE_SEL	9
--#define BITS_MULTICORE	12
--
--#define CMD	(1 << BITS_MULTICORE) | (1 << BITS_CORE_SEL) | \
--		(1 << BITS_POLARITY) | (1 << BITS_START)
- 
--	writel(CMD, (void __iomem *)AXC003_CREG_CPU_START);
-+	int cmd = readl((void __iomem *)AXC003_CREG_CPU_START);
-+	cmd |= (1 << BITS_CORE_SEL) | (1 << BITS_START);
-+	cmd &= ~(1 << BITS_START_MODE);
-+	writel(cmd, (void __iomem *)AXC003_CREG_CPU_START);
- }
- #endif
--- 
-2.7.4
-

board/synopsys/axs10x/patches/u-boot/0002-axs103-Support-slave-core-kick-start-on-axs103-v1.1-.patch

@@ -1,72 +0,0 @@
-From a5fa3b17cb10ce020f8b7fe6a26c45d75f55b481 Mon Sep 17 00:00:00 2001
-From: Alexey Brodkin <abrodkin@synopsys.com>
-Date: Fri, 31 Mar 2017 11:14:35 +0300
-Subject: [PATCH] axs103: Support slave core kick-start on axs103 v1.1
- firmware
-
-In axs103 v1.1 procedure to kick-start slave cores has changed quite a bit
-compared to previous implementation.
-
-In particular:
- * We used to have a generic START bit for all cores selected by CORE_SEL
-   mask. But now we don't touch CORE_SEL at all because we have a dedicated
-   START bit for each core:
-     bit 0: Core 0 (master)
-     bit 1: Core 1 (slave)
- * Now there's no need to select "manual" mode of core start
-
-Additional challenge for us is how to tell which axs103 firmware we're
-dealing with. For now we'll rely on ARC core version which was bumped
-from 2.1c to 3.0.
-
-Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
-Signed-off-by: Vlad Zakharov <vzakhar@synopsys.com>
----
- board/synopsys/axs10x/axs10x.c | 23 +++++++++++++++++++++--
- 1 file changed, 21 insertions(+), 2 deletions(-)
-
-diff --git a/board/synopsys/axs10x/axs10x.c b/board/synopsys/axs10x/axs10x.c
-index 57c790220f71..e6b69da3da7f 100644
---- a/board/synopsys/axs10x/axs10x.c
-+++ b/board/synopsys/axs10x/axs10x.c
-@@ -7,6 +7,7 @@
- #include <common.h>
- #include <dwmmc.h>
- #include <malloc.h>
-+#include <asm/arcregs.h>
- #include "axs10x.h"
- 
- DECLARE_GLOBAL_DATA_PTR;
-@@ -66,9 +67,27 @@ void smp_kick_all_cpus(void)
- #define BITS_START_MODE	4
- #define BITS_CORE_SEL	9
- 
-+/*
-+ * In axs103 v1.1 START bits semantics has changed quite a bit.
-+ * We used to have a generic START bit for all cores selected by CORE_SEL mask.
-+ * But now we don't touch CORE_SEL at all because we have a dedicated START bit
-+ * for each core:
-+ *     bit 0: Core 0 (master)
-+ *     bit 1: Core 1 (slave)
-+ */
-+#define BITS_START_CORE1	1
-+
-+#define ARCVER_HS38_3_0	0x53
-+
-+	int core_family = read_aux_reg(ARC_AUX_IDENTITY) & 0xff;
- 	int cmd = readl((void __iomem *)AXC003_CREG_CPU_START);
--	cmd |= (1 << BITS_CORE_SEL) | (1 << BITS_START);
--	cmd &= ~(1 << BITS_START_MODE);
-+
-+	if (core_family < ARCVER_HS38_3_0) {
-+		cmd |= (1 << BITS_CORE_SEL) | (1 << BITS_START);
-+		cmd &= ~(1 << BITS_START_MODE);
-+	} else {
-+		cmd |= (1 << BITS_START_CORE1);
-+	}
- 	writel(cmd, (void __iomem *)AXC003_CREG_CPU_START);
- }
- #endif
--- 
-2.7.4
-

board/synopsys/vdk/patches/linux/0001-arc-vdk-Disable-halt-on-reset.patch

@@ -0,0 +1,32 @@
+From 1e248a880ee46921f85213da32b18f6becf07078 Mon Sep 17 00:00:00 2001
+From: Alexey Brodkin <abrodkin@synopsys.com>
+Date: Tue, 31 Jan 2017 19:00:29 +0300
+Subject: [PATCH 1/3] arc: vdk: Disable halt on reset
+
+In recent VDKs ARC cores are configured as "run on reset"
+which made existing kernel configuration outdated to effect that
+slave cores never start execution of the code keeping only master
+online.
+
+With that fix we're again in sync with VDK platform.
+
+Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
+---
+ arch/arc/configs/vdk_hs38_smp_defconfig | 1 +
+ 1 file changed, 1 insertion(+)
+
+diff --git a/arch/arc/configs/vdk_hs38_smp_defconfig b/arch/arc/configs/vdk_hs38_smp_defconfig
+index 969b206d6c67..00036e814dc1 100644
+--- a/arch/arc/configs/vdk_hs38_smp_defconfig
++++ b/arch/arc/configs/vdk_hs38_smp_defconfig
+@@ -15,6 +15,7 @@ CONFIG_ARC_PLAT_AXS10X=y
+ CONFIG_AXS103=y
+ CONFIG_ISA_ARCV2=y
+ CONFIG_SMP=y
++# CONFIG_ARC_SMP_HALT_ON_RESET is not set
+ # CONFIG_ARC_HAS_GFRC is not set
+ CONFIG_ARC_UBOOT_SUPPORT=y
+ CONFIG_ARC_BUILTIN_DTB_NAME="vdk_hs38_smp"
+-- 
+2.7.4
+

board/telit/evk-pro3/barebox-2013.04.0-0001-watchdog-add-keep-alive-support.patch

@@ -1,20 +1,19 @@
-From 76e2b190803484db033153fe8a97b381a567ed25 Mon Sep 17 00:00:00 2001
+From b5e57a9f158a293b1151638336478af8a5aad0f0 Mon Sep 17 00:00:00 2001
 From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 Date: Wed, 14 Nov 2012 19:16:35 +0800
-Subject: [PATCH 1/4] watchdog: add keep alive support
+Subject: [PATCH 1/5] watchdog: add keep alive support
 
 this will allow to ping the watchdog via poller
 
 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
 ---
  drivers/watchdog/Kconfig   |  1 +
- drivers/watchdog/wd_core.c | 25 +++++++++++++++++++++++++
+ drivers/watchdog/wd_core.c | 21 +++++++++++++++++++++
  include/watchdog.h         |  2 ++
- 3 files changed, 28 insertions(+)
+ 3 files changed, 24 insertions(+)
 
 diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 63fb1a8c5..7ebff89b9 100644
+index 2e2900c..0b4dc84 100644
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
 @@ -4,6 +4,7 @@ config WATCHDOG_IMX_RESET_SOURCE
@@ -26,29 +25,23 @@ index 63fb1a8c5..7ebff89b9 100644
  	  Many platforms support a watchdog to keep track of a working machine.
  	  This framework provides routines to handle these watchdogs.
 diff --git a/drivers/watchdog/wd_core.c b/drivers/watchdog/wd_core.c
-index 3a3f51964..52537afef 100644
+index 3d0cfc6..a1b9e28 100644
 --- a/drivers/watchdog/wd_core.c
 +++ b/drivers/watchdog/wd_core.c
-@@ -18,6 +18,7 @@
+@@ -17,18 +17,39 @@
  #include <errno.h>
  #include <linux/ctype.h>
  #include <watchdog.h>
 +#include <poller.h>
  
- static LIST_HEAD(watchdog_list);
+ /*
+  * Note: this simple framework supports one watchdog only.
+  */
+ static struct watchdog *watchdog;
  
-@@ -31,6 +32,20 @@ static const char *watchdog_name(struct watchdog *wd)
- 	return "unknown";
- }
- 
-+static struct watchdog *watchdog_get_default(void);
-+
 +static void watchdog_poller_func(struct poller_struct *poller)
 +{
-+	struct watchdog *wd = watchdog_get_default();
-+
-+	if (wd)
-+                wd->keep_alive(wd);
++	watchdog->keep_alive(watchdog);
 +}
 +
 +static struct poller_struct watchdog_poller = {
@@ -57,17 +50,17 @@ index 3a3f51964..52537afef 100644
 +
  int watchdog_register(struct watchdog *wd)
  {
- 	if (!wd->priority)
-@@ -41,6 +56,16 @@ int watchdog_register(struct watchdog *wd)
- 	pr_debug("registering watchdog %s with priority %d\n", watchdog_name(wd),
- 			wd->priority);
+ 	if (watchdog != NULL)
+ 		return -EBUSY;
  
+ 	watchdog = wd;
 +
-+	if (wd->keep_alive) {
++	if (watchdog->keep_alive) {
 +		int ret;
 +
 +		ret = poller_register(&watchdog_poller);
 +		if (ret) {
++			watchdog = NULL;
 +			return ret;
 +		}
 +	}
@@ -76,24 +69,20 @@ index 3a3f51964..52537afef 100644
  }
  EXPORT_SYMBOL(watchdog_register);
 diff --git a/include/watchdog.h b/include/watchdog.h
-index 3e8a487a4..a2660c2e0 100644
+index 3e2d08e..d5ecf2f 100644
 --- a/include/watchdog.h
 +++ b/include/watchdog.h
-@@ -13,12 +13,14 @@
+@@ -13,8 +13,10 @@
  #ifndef INCLUDE_WATCHDOG_H
  # define INCLUDE_WATCHDOG_H
  
 +
  struct watchdog {
  	int (*set_timeout)(struct watchdog *, unsigned);
- 	const char *name;
- 	struct device_d *dev;
- 	unsigned int priority;
- 	struct list_head list;
 +	void (*keep_alive)(struct watchdog *);
  };
  
- #ifdef CONFIG_WATCHDOG
+ int watchdog_register(struct watchdog *);
 -- 
-2.12.0
+1.8.1.4
 

board/telit/evk-pro3/barebox-2013.04.0-0002-watchdog-add-at91sam9-watchdog-support.patch

@@ -1,26 +1,25 @@
-From 24d99ffc4b22e45721e74bfc10717cc5bacdbfc4 Mon Sep 17 00:00:00 2001
+From e1d54ffb987c346c45c20968be34c50c62a91c07 Mon Sep 17 00:00:00 2001
 From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 Date: Wed, 14 Nov 2012 19:17:47 +0800
-Subject: [PATCH 2/4] watchdog: add at91sam9 watchdog support
+Subject: [PATCH 2/5] watchdog: add at91sam9 watchdog support
 
 with keep alive support
 
 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
 ---
- drivers/watchdog/Kconfig        |   8 +++
+ drivers/watchdog/Kconfig        |   7 +++
  drivers/watchdog/Makefile       |   1 +
  drivers/watchdog/at91sam9_wdt.c | 131 ++++++++++++++++++++++++++++++++++++++++
  drivers/watchdog/at91sam9_wdt.h |  38 ++++++++++++
- 4 files changed, 178 insertions(+)
+ 4 files changed, 177 insertions(+)
  create mode 100644 drivers/watchdog/at91sam9_wdt.c
  create mode 100644 drivers/watchdog/at91sam9_wdt.h
 
 diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig
-index 7ebff89b9..479e737f0 100644
+index 0b4dc84..98a21d7 100644
 --- a/drivers/watchdog/Kconfig
 +++ b/drivers/watchdog/Kconfig
-@@ -11,12 +11,20 @@ menuconfig WATCHDOG
+@@ -11,6 +11,13 @@ menuconfig WATCHDOG
  
  if WATCHDOG
  
@@ -31,29 +30,21 @@ index 7ebff89b9..479e737f0 100644
 +	  Watchdog timer embedded into AT91SAM9X and AT91CAP9 chips. This will
 +	  reboot your system when the timeout is reached.
 +
- config WATCHDOG_DAVINCI
- 	bool "TI Davinci"
- 	depends on ARCH_DAVINCI
- 	help
- 	  Add support for watchdog on the TI Davinci SoC.
- 
-+
- config WATCHDOG_DW
- 	bool "Synopsys DesignWare watchdog"
- 	select RESET_CONTROLLER
+ config WATCHDOG_MXS28
+ 	bool "i.MX28"
+ 	depends on ARCH_IMX28
 diff --git a/drivers/watchdog/Makefile b/drivers/watchdog/Makefile
-index 5fca4c368..245a5c84a 100644
+index f522b88..3d15d52 100644
 --- a/drivers/watchdog/Makefile
 +++ b/drivers/watchdog/Makefile
-@@ -1,4 +1,5 @@
+@@ -1,3 +1,4 @@
  obj-$(CONFIG_WATCHDOG) += wd_core.o
 +obj-$(CONFIG_WATCHDOG_AT91SAM9X) += at91sam9_wdt.o
- obj-$(CONFIG_WATCHDOG_DAVINCI) += davinci_wdt.o
- obj-$(CONFIG_WATCHDOG_OMAP) += omap_wdt.o
  obj-$(CONFIG_WATCHDOG_MXS28) += im28wd.o
+ obj-$(CONFIG_WATCHDOG_IMX_RESET_SOURCE) += imxwd.o
 diff --git a/drivers/watchdog/at91sam9_wdt.c b/drivers/watchdog/at91sam9_wdt.c
 new file mode 100644
-index 000000000..203d83aff
+index 0000000..203d83a
 --- /dev/null
 +++ b/drivers/watchdog/at91sam9_wdt.c
 @@ -0,0 +1,131 @@
@@ -190,7 +181,7 @@ index 000000000..203d83aff
 +coredevice_initcall(at91sam9_wdt_init);
 diff --git a/drivers/watchdog/at91sam9_wdt.h b/drivers/watchdog/at91sam9_wdt.h
 new file mode 100644
-index 000000000..2b68c1a2a
+index 0000000..2b68c1a
 --- /dev/null
 +++ b/drivers/watchdog/at91sam9_wdt.h
 @@ -0,0 +1,38 @@
@@ -233,5 +224,5 @@ index 000000000..2b68c1a2a
 +
 +#endif
 -- 
-2.12.0
+1.8.1.4
 

board/telit/evk-pro3/barebox-2013.04.0-0003-at91sam9260-9g20-add-wathdog-support.patch

@@ -1,22 +1,30 @@
-From 60110b93a5cbc6ec3d92035d9daf86a30a7fd791 Mon Sep 17 00:00:00 2001
+From 3338bcb05479f1149420d4a0ea3904cb9e42eef5 Mon Sep 17 00:00:00 2001
 From: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
 Date: Wed, 14 Nov 2012 19:18:22 +0800
-Subject: [PATCH 3/4] at91sam9260/9g20: add wathdog support
+Subject: [PATCH 3/5] at91sam9260/9g20: add wathdog support
 
 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
-Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
 ---
- arch/arm/mach-at91/at91sam9260_devices.c | 11 +++++++++++
- 1 file changed, 11 insertions(+)
+ arch/arm/mach-at91/at91sam9260_devices.c | 12 ++++++++++++
+ 1 file changed, 12 insertions(+)
 
 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 67c4ea860..51852a9a8 100644
+index 1c375ee..5885f91 100644
 --- a/arch/arm/mach-at91/at91sam9260_devices.c
 +++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -400,6 +400,17 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
+@@ -10,6 +10,7 @@
+  *
+  */
+ #include <common.h>
++#include <init.h>
+ #include <sizes.h>
+ #include <asm/armlinux.h>
+ #include <asm/hardware.h>
+@@ -397,3 +398,14 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data)
+ #else
  void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
  #endif
- 
++
 +#ifdef CONFIG_WATCHDOG_AT91SAM9X
 +static int at91_add_device_watchdog(void)
 +{
@@ -27,10 +35,6 @@ index 67c4ea860..51852a9a8 100644
 +}
 +coredevice_initcall(at91_add_device_watchdog);
 +#endif
-+
- static int at91_fixup_device(void)
- {
- 	at91_rtt_irq_fixup(IOMEM(AT91SAM9260_BASE_RTT));
 -- 
-2.12.0
+1.8.1.4
 

board/telit/evk-pro3/barebox-2013.04.0-0004-at91sam9260-9g20-fix-wathdog-support.patch

@@ -1,7 +1,7 @@
-From d8231b1726a020733d87c2685ec1631403e050cf Mon Sep 17 00:00:00 2001
+From e03bf0e3ad24898019b89eb9a6935d159c60268f Mon Sep 17 00:00:00 2001
 From: Fabio Porcedda <fabio.porcedda@gmail.com>
 Date: Thu, 17 Jan 2013 11:32:35 +0100
-Subject: [PATCH 4/4] at91sam9260/9g20: fix wathdog support
+Subject: [PATCH 4/5] at91sam9260/9g20: fix wathdog support
 
 Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
 ---
@@ -9,10 +9,10 @@ Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
  1 file changed, 1 insertion(+), 1 deletion(-)
 
 diff --git a/arch/arm/mach-at91/at91sam9260_devices.c b/arch/arm/mach-at91/at91sam9260_devices.c
-index 51852a9a8..20c8cac9d 100644
+index 5885f91..df675d2 100644
 --- a/arch/arm/mach-at91/at91sam9260_devices.c
 +++ b/arch/arm/mach-at91/at91sam9260_devices.c
-@@ -404,7 +404,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
+@@ -403,7 +403,7 @@ void at91_add_device_mci(short mmc_id, struct atmel_mci_platform_data *data) {}
  static int at91_add_device_watchdog(void)
  {
  	add_generic_device("at91sam9_wdt", DEVICE_ID_SINGLE, NULL,
@@ -22,5 +22,5 @@ index 51852a9a8..20c8cac9d 100644
  	return 0;
  }
 -- 
-2.12.0
+1.8.1.4
 

board/telit/evk-pro3/barebox-2013.04.0-0005-watchdog-enable-for-evk-pro3.patch

@@ -0,0 +1,26 @@
+From 98c96ea36a4b3bb9b92dde849db5e8d6918b5168 Mon Sep 17 00:00:00 2001
+From: Fabio Porcedda <fabio.porcedda@gmail.com>
+Date: Thu, 17 Jan 2013 11:32:59 +0100
+Subject: [PATCH 5/5] watchdog: enable for evk-pro3
+
+Signed-off-by: Fabio Porcedda <fabio.porcedda@gmail.com>
+---
+ arch/arm/configs/telit_evk_pro3_defconfig | 2 ++
+ 1 file changed, 2 insertions(+)
+
+diff --git a/arch/arm/configs/telit_evk_pro3_defconfig b/arch/arm/configs/telit_evk_pro3_defconfig
+index 050d176..436cecf 100644
+--- a/arch/arm/configs/telit_evk_pro3_defconfig
++++ b/arch/arm/configs/telit_evk_pro3_defconfig
+@@ -68,6 +68,8 @@ CONFIG_MCI_ATMEL=y
+ CONFIG_LED=y
+ CONFIG_LED_GPIO=y
+ CONFIG_LED_TRIGGERS=y
++CONFIG_WATCHDOG=y
++CONFIG_WATCHDOG_AT91SAM9X=y
+ CONFIG_FS_TFTP=y
+ CONFIG_FS_FAT=y
+ CONFIG_FS_FAT_LFN=y
+-- 
+1.8.1.4
+

board/telit/evk-pro3/barebox.fragment

@@ -1,2 +0,0 @@
-CONFIG_WATCHDOG=y
-CONFIG_WATCHDOG_AT91SAM9X=y

board/telit/evk-pro3/linux-3.9.config

@@ -0,0 +1,201 @@
+CONFIG_EXPERIMENTAL=y
+# CONFIG_LOCALVERSION_AUTO is not set
+CONFIG_KERNEL_LZO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_KALLSYMS_ALL=y
+CONFIG_EMBEDDED=y
+CONFIG_SLAB=y
+CONFIG_MODULES=y
+CONFIG_MODULE_UNLOAD=y
+# CONFIG_LBDAF is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_ARCH_AT91=y
+CONFIG_SOC_AT91SAM9260=y
+CONFIG_SOC_AT91SAM9263=y
+CONFIG_SOC_AT91SAM9G45=y
+CONFIG_SOC_AT91SAM9X5=y
+CONFIG_SOC_AT91SAM9N12=y
+CONFIG_MACH_AT91SAM_DT=y
+CONFIG_AT91_PROGRAMMABLE_CLOCKS=y
+CONFIG_AT91_TIMER_HZ=128
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_LEDS=y
+CONFIG_LEDS_CPU=y
+CONFIG_UACCESS_WITH_MEMCPY=y
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_ARM_APPENDED_DTB=y
+CONFIG_ARM_ATAG_DTB_COMPAT=y
+CONFIG_CMDLINE="console=ttyS0,115200 initrd=0x21100000,25165824 root=/dev/ram0 rw"
+CONFIG_KEXEC=y
+CONFIG_AUTO_ZRELADDR=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_NET=y
+CONFIG_PACKET=y
+CONFIG_UNIX=y
+CONFIG_INET=y
+CONFIG_IP_MULTICAST=y
+CONFIG_IP_PNP=y
+# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET_XFRM_MODE_BEET is not set
+# CONFIG_INET_DIAG is not set
+CONFIG_IPV6=y
+# CONFIG_INET6_XFRM_MODE_TRANSPORT is not set
+# CONFIG_INET6_XFRM_MODE_TUNNEL is not set
+# CONFIG_INET6_XFRM_MODE_BEET is not set
+CONFIG_IPV6_SIT_6RD=y
+# CONFIG_WIRELESS is not set
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_DEVTMPFS=y
+CONFIG_DEVTMPFS_MOUNT=y
+# CONFIG_STANDALONE is not set
+# CONFIG_PREVENT_FIRMWARE_BUILD is not set
+CONFIG_MTD=y
+CONFIG_MTD_CMDLINE_PARTS=y
+CONFIG_MTD_CHAR=y
+CONFIG_MTD_BLOCK=y
+CONFIG_MTD_NAND=y
+CONFIG_MTD_NAND_ATMEL=y
+CONFIG_MTD_UBI=y
+CONFIG_MTD_UBI_GLUEBI=y
+CONFIG_PROC_DEVICETREE=y
+CONFIG_BLK_DEV_LOOP=y
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=4
+CONFIG_BLK_DEV_RAM_SIZE=8192
+CONFIG_ATMEL_PWM=y
+CONFIG_ATMEL_TCLIB=y
+CONFIG_EEPROM_93CX6=m
+CONFIG_SCSI=y
+CONFIG_BLK_DEV_SD=y
+CONFIG_SCSI_MULTI_LUN=y
+# CONFIG_SCSI_LOWLEVEL is not set
+CONFIG_NETDEVICES=y
+CONFIG_MII=y
+CONFIG_MACB=y
+# CONFIG_NET_VENDOR_BROADCOM is not set
+# CONFIG_NET_VENDOR_CHELSIO is not set
+# CONFIG_NET_VENDOR_FARADAY is not set
+# CONFIG_NET_VENDOR_INTEL is not set
+# CONFIG_NET_VENDOR_MARVELL is not set
+# CONFIG_NET_VENDOR_MICREL is not set
+# CONFIG_NET_VENDOR_NATSEMI is not set
+# CONFIG_NET_VENDOR_SEEQ is not set
+# CONFIG_NET_VENDOR_SMSC is not set
+# CONFIG_NET_VENDOR_STMICRO is not set
+CONFIG_DAVICOM_PHY=y
+CONFIG_MICREL_PHY=y
+# CONFIG_WLAN is not set
+CONFIG_INPUT_POLLDEV=y
+# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=480
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=272
+CONFIG_INPUT_JOYDEV=y
+CONFIG_INPUT_EVDEV=y
+# CONFIG_KEYBOARD_ATKBD is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_SERIO is not set
+CONFIG_LEGACY_PTY_COUNT=4
+CONFIG_SERIAL_ATMEL=y
+CONFIG_SERIAL_ATMEL_CONSOLE=y
+CONFIG_HW_RANDOM=y
+CONFIG_I2C=y
+CONFIG_I2C_GPIO=y
+CONFIG_SPI=y
+CONFIG_SPI_ATMEL=y
+CONFIG_PINCTRL_AT91=y
+CONFIG_GPIO_SYSFS=y
+# CONFIG_HWMON is not set
+CONFIG_WATCHDOG=y
+CONFIG_AT91SAM9X_WATCHDOG=y
+CONFIG_SSB=m
+CONFIG_FB=y
+CONFIG_FB_MODE_HELPERS=y
+CONFIG_FB_ATMEL=y
+CONFIG_BACKLIGHT_LCD_SUPPORT=y
+# CONFIG_LCD_CLASS_DEVICE is not set
+CONFIG_BACKLIGHT_CLASS_DEVICE=y
+CONFIG_BACKLIGHT_ATMEL_LCDC=y
+# CONFIG_BACKLIGHT_GENERIC is not set
+CONFIG_FRAMEBUFFER_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y
+CONFIG_FONTS=y
+CONFIG_FONT_8x8=y
+CONFIG_FONT_ACORN_8x8=y
+CONFIG_FONT_MINI_4x6=y
+CONFIG_LOGO=y
+# CONFIG_HID_SUPPORT is not set
+CONFIG_USB=y
+CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
+CONFIG_USB_DEVICEFS=y
+# CONFIG_USB_DEVICE_CLASS is not set
+CONFIG_USB_EHCI_HCD=y
+CONFIG_USB_OHCI_HCD=y
+CONFIG_USB_ACM=y
+CONFIG_USB_STORAGE=y
+CONFIG_USB_SERIAL=y
+CONFIG_USB_SERIAL_GENERIC=y
+CONFIG_USB_SERIAL_FTDI_SIO=y
+CONFIG_USB_SERIAL_PL2303=y
+CONFIG_USB_GADGET=y
+CONFIG_USB_AT91=m
+CONFIG_USB_ATMEL_USBA=m
+CONFIG_USB_ETH=m
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_CDC_COMPOSITE=m
+CONFIG_USB_G_ACM_MS=m
+CONFIG_USB_G_MULTI=m
+CONFIG_USB_G_MULTI_CDC=y
+CONFIG_MMC=y
+CONFIG_MMC_ATMELMCI=y
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=y
+CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=y
+CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+CONFIG_LEDS_TRIGGER_GPIO=y
+CONFIG_RTC_CLASS=y
+CONFIG_RTC_DRV_AT91RM9200=y
+CONFIG_RTC_DRV_AT91SAM9=y
+CONFIG_DMADEVICES=y
+# CONFIG_IOMMU_SUPPORT is not set
+CONFIG_EXT2_FS=y
+CONFIG_FANOTIFY=y
+CONFIG_VFAT_FS=y
+CONFIG_TMPFS=y
+CONFIG_UBIFS_FS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+CONFIG_ROOT_NFS=y
+CONFIG_NLS_CODEPAGE_437=y
+CONFIG_NLS_CODEPAGE_850=y
+CONFIG_NLS_ISO8859_1=y
+CONFIG_STRIP_ASM_SYMS=y
+CONFIG_DEBUG_FS=y
+# CONFIG_SCHED_DEBUG is not set
+# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_FTRACE is not set
+CONFIG_DEBUG_USER=y
+CONFIG_CRYPTO=y
+CONFIG_CRYPTO_ECB=y
+CONFIG_CRYPTO_AES=y
+CONFIG_CRYPTO_ARC4=y
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+CONFIG_CRYPTO_USER_API_HASH=m
+CONFIG_CRYPTO_USER_API_SKCIPHER=m
+# CONFIG_CRYPTO_HW is not set
+CONFIG_CRC_CCITT=m
+CONFIG_CRC_ITU_T=m
+CONFIG_CRC7=m
+CONFIG_AVERAGE=y

board/telit/evk-pro3/linux.fragment

@@ -1,3 +0,0 @@
-CONFIG_KERNEL_LZO=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_UBIFS_FS=y

board/telit/evk-pro3/patches/linux/0001-kernel-add-support-for-gcc-5.patch

@@ -1,97 +0,0 @@
-From 71458cfc782eafe4b27656e078d379a34e472adf Mon Sep 17 00:00:00 2001
-From: Sasha Levin <sasha.levin@oracle.com>
-Date: Mon, 13 Oct 2014 15:51:05 -0700
-Subject: [PATCH] kernel: add support for gcc 5
-
-We're missing include/linux/compiler-gcc5.h which is required now
-because gcc branched off to v5 in trunk.
-
-Just copy the relevant bits out of include/linux/compiler-gcc4.h,
-no new code is added as of now.
-
-This fixes a build error when using gcc 5.
-
-Signed-off-by: Sasha Levin <sasha.levin@oracle.com>
-Cc: <stable@vger.kernel.org>
-Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
-Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
----
- include/linux/compiler-gcc5.h | 66 +++++++++++++++++++++++++++++++++++++++++++
- 1 file changed, 66 insertions(+)
- create mode 100644 include/linux/compiler-gcc5.h
-
-diff --git a/include/linux/compiler-gcc5.h b/include/linux/compiler-gcc5.h
-new file mode 100644
-index 000000000000..cdd1cc202d51
---- /dev/null
-+++ b/include/linux/compiler-gcc5.h
-@@ -0,0 +1,66 @@
-+#ifndef __LINUX_COMPILER_H
-+#error "Please don't include <linux/compiler-gcc5.h> directly, include <linux/compiler.h> instead."
-+#endif
-+
-+#define __used				__attribute__((__used__))
-+#define __must_check			__attribute__((warn_unused_result))
-+#define __compiler_offsetof(a, b)	__builtin_offsetof(a, b)
-+
-+/* Mark functions as cold. gcc will assume any path leading to a call
-+   to them will be unlikely.  This means a lot of manual unlikely()s
-+   are unnecessary now for any paths leading to the usual suspects
-+   like BUG(), printk(), panic() etc. [but let's keep them for now for
-+   older compilers]
-+
-+   Early snapshots of gcc 4.3 don't support this and we can't detect this
-+   in the preprocessor, but we can live with this because they're unreleased.
-+   Maketime probing would be overkill here.
-+
-+   gcc also has a __attribute__((__hot__)) to move hot functions into
-+   a special section, but I don't see any sense in this right now in
-+   the kernel context */
-+#define __cold			__attribute__((__cold__))
-+
-+#define __UNIQUE_ID(prefix) __PASTE(__PASTE(__UNIQUE_ID_, prefix), __COUNTER__)
-+
-+#ifndef __CHECKER__
-+# define __compiletime_warning(message) __attribute__((warning(message)))
-+# define __compiletime_error(message) __attribute__((error(message)))
-+#endif /* __CHECKER__ */
-+
-+/*
-+ * Mark a position in code as unreachable.  This can be used to
-+ * suppress control flow warnings after asm blocks that transfer
-+ * control elsewhere.
-+ *
-+ * Early snapshots of gcc 4.5 don't support this and we can't detect
-+ * this in the preprocessor, but we can live with this because they're
-+ * unreleased.  Really, we need to have autoconf for the kernel.
-+ */
-+#define unreachable() __builtin_unreachable()
-+
-+/* Mark a function definition as prohibited from being cloned. */
-+#define __noclone	__attribute__((__noclone__))
-+
-+/*
-+ * Tell the optimizer that something else uses this function or variable.
-+ */
-+#define __visible __attribute__((externally_visible))
-+
-+/*
-+ * GCC 'asm goto' miscompiles certain code sequences:
-+ *
-+ *   http://gcc.gnu.org/bugzilla/show_bug.cgi?id=58670
-+ *
-+ * Work it around via a compiler barrier quirk suggested by Jakub Jelinek.
-+ * Fixed in GCC 4.8.2 and later versions.
-+ *
-+ * (asm goto is automatically volatile - the naming reflects this.)
-+ */
-+#define asm_volatile_goto(x...)	do { asm goto(x); asm (""); } while (0)
-+
-+#ifdef CONFIG_ARCH_USE_BUILTIN_BSWAP
-+#define __HAVE_BUILTIN_BSWAP32__
-+#define __HAVE_BUILTIN_BSWAP64__
-+#define __HAVE_BUILTIN_BSWAP16__
-+#endif /* CONFIG_ARCH_USE_BUILTIN_BSWAP */
--- 
-2.12.2
-

board/telit/evk-pro3/patches/linux/0002-ARM-8158-1-LLVMLinux-use-static-inline-in-ARM-ftrace.patch

@@ -1,52 +0,0 @@
-From aeea3592a13bf12861943e44fc48f1f270941f8d Mon Sep 17 00:00:00 2001
-From: Behan Webster <behanw@converseincode.com>
-Date: Wed, 24 Sep 2014 01:06:46 +0100
-Subject: [PATCH] ARM: 8158/1: LLVMLinux: use static inline in ARM ftrace.h
-
-With compilers which follow the C99 standard (like modern versions of gcc and
-clang), "extern inline" does the wrong thing (emits code for an externally
-linkable version of the inline function). In this case using static inline
-and removing the NULL version of return_address in return_address.c does
-the right thing.
-
-Signed-off-by: Behan Webster <behanw@converseincode.com>
-Reviewed-by: Mark Charlebois <charlebm@gmail.com>
-Acked-by: Steven Rostedt <rostedt@goodmis.org>
-Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
----
- arch/arm/include/asm/ftrace.h    | 2 +-
- arch/arm/kernel/return_address.c | 5 -----
- 2 files changed, 1 insertion(+), 6 deletions(-)
-
-diff --git a/arch/arm/include/asm/ftrace.h b/arch/arm/include/asm/ftrace.h
-index 39eb16b0066f..bfe2a2f5a644 100644
---- a/arch/arm/include/asm/ftrace.h
-+++ b/arch/arm/include/asm/ftrace.h
-@@ -45,7 +45,7 @@ void *return_address(unsigned int);
- 
- #else
- 
--extern inline void *return_address(unsigned int level)
-+static inline void *return_address(unsigned int level)
- {
- 	return NULL;
- }
-diff --git a/arch/arm/kernel/return_address.c b/arch/arm/kernel/return_address.c
-index fafedd86885d..f6aa84d5b93c 100644
---- a/arch/arm/kernel/return_address.c
-+++ b/arch/arm/kernel/return_address.c
-@@ -63,11 +63,6 @@ void *return_address(unsigned int level)
- #warning "TODO: return_address should use unwind tables"
- #endif
- 
--void *return_address(unsigned int level)
--{
--	return NULL;
--}
--
- #endif /* if defined(CONFIG_FRAME_POINTER) && !defined(CONFIG_ARM_UNWIND) / else */
- 
- EXPORT_SYMBOL_GPL(return_address);
--- 
-2.12.2
-

board/udoo/neo/patches/linux/0001-udoo_neo_support.patch

@@ -0,0 +1,560 @@
+From 76e691fc7653b85d390e58710e5c7db73ca49367 Mon Sep 17 00:00:00 2001
+From: Andreas Färber <afaerber@suse.de>
+Date: Sun, 16 Oct 2016 16:44:23 +0200
+Subject: ARM: dts: imx6sx: Add UDOO Neo support
+MIME-Version: 1.0
+Content-Type: text/plain; charset=UTF-8
+Content-Transfer-Encoding: 8bit
+
+Add initial device trees for UDOO Neo Basic, Extended and Full boards:
+* Serial console is enabled, other serial ports are prepared.
+* I2C based PMIC is enabled.
+* Ethernet is enabled for Basic and Full.
+* SDHC is enabled, with the SDIO_PWR GPIO modeled as a regulator.
+* Both user LEDs are enabled, with the orange one reserved for the M4
+  and with the SD card as default trigger for the red LED.
+
+The decision on a board compatible string is deferred to later.
+
+Cc: Ettore Chimenti <ettore.chimenti@udoo.org>
+Signed-off-by: Andreas Färber <afaerber@suse.de>
+Signed-off-by: Shawn Guo <shawnguo@kernel.org>
+---
+ arch/arm/boot/dts/Makefile                     |   5 +-
+ arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts    |  69 ++++++
+ arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts |  54 +++++
+ arch/arm/boot/dts/imx6sx-udoo-neo-full.dts     |  69 ++++++
+ arch/arm/boot/dts/imx6sx-udoo-neo.dtsi         | 293 +++++++++++++++++++++++++
+ 5 files changed, 489 insertions(+), 1 deletion(-)
+ create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+ create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+ create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+ create mode 100644 arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+
+diff --git a/arch/arm/boot/dts/Makefile b/arch/arm/boot/dts/Makefile
+index 019976b..da0197d 100644
+--- a/arch/arm/boot/dts/Makefile
++++ b/arch/arm/boot/dts/Makefile
+@@ -417,7 +417,10 @@ dtb-$(CONFIG_SOC_IMX6SX) += \
+ 	imx6sx-sabreauto.dtb \
+ 	imx6sx-sdb-reva.dtb \
+ 	imx6sx-sdb-sai.dtb \
+-	imx6sx-sdb.dtb
++	imx6sx-sdb.dtb \
++	imx6sx-udoo-neo-basic.dtb \
++	imx6sx-udoo-neo-extended.dtb \
++	imx6sx-udoo-neo-full.dtb
+ dtb-$(CONFIG_SOC_IMX6UL) += \
+ 	imx6ul-14x14-evk.dtb \
+ 	imx6ul-geam-kit.dtb \
+diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+new file mode 100644
+index 0000000..0b88878
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-basic.dts
+@@ -0,0 +1,69 @@
++/*
++ * Copyright (c) 2016 Andreas Färber
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This library is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This library is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "imx6sx-udoo-neo.dtsi"
++
++/ {
++	model = "UDOO Neo Basic";
++	compatible = "fsl,imx6sx";
++
++	memory {
++		reg = <0x80000000 0x20000000>;
++	};
++};
++
++&fec1 {
++	phy-handle = <&ethphy1>;
++	status = "okay";
++
++	mdio {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		ethphy1: ethernet-phy@0 {
++			compatible = "ethernet-phy-ieee802.3-c22";
++			reg = <0>;
++		};
++	};
++};
+diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+new file mode 100644
+index 0000000..d6fdd17
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-extended.dts
+@@ -0,0 +1,54 @@
++/*
++ * Copyright (c) 2016 Andreas Färber
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This library is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This library is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "imx6sx-udoo-neo.dtsi"
++
++/ {
++	model = "UDOO Neo Extended";
++	compatible = "fsl,imx6sx";
++
++	memory {
++		reg = <0x80000000 0x40000000>;
++	};
++};
+diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+new file mode 100644
+index 0000000..d8c3577
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6sx-udoo-neo-full.dts
+@@ -0,0 +1,69 @@
++/*
++ * Copyright (c) 2016 Andreas Färber
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This library is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This library is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++/dts-v1/;
++
++#include "imx6sx-udoo-neo.dtsi"
++
++/ {
++	model = "UDOO Neo Full";
++	compatible = "fsl,imx6sx";
++
++	memory {
++		reg = <0x80000000 0x40000000>;
++	};
++};
++
++&fec1 {
++	phy-handle = <&ethphy1>;
++	status = "okay";
++
++	mdio {
++		#address-cells = <1>;
++		#size-cells = <0>;
++
++		ethphy1: ethernet-phy@0 {
++			compatible = "ethernet-phy-ieee802.3-c22";
++			reg = <0>;
++		};
++	};
++};
+diff --git a/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+new file mode 100644
+index 0000000..2b65d26
+--- /dev/null
++++ b/arch/arm/boot/dts/imx6sx-udoo-neo.dtsi
+@@ -0,0 +1,293 @@
++/*
++ * Copyright (c) 2016 Andreas Färber
++ *
++ * This file is dual-licensed: you can use it either under the terms
++ * of the GPL or the X11 license, at your option. Note that this dual
++ * licensing only applies to this file, and not this project as a
++ * whole.
++ *
++ *  a) This library is free software; you can redistribute it and/or
++ *     modify it under the terms of the GNU General Public License as
++ *     published by the Free Software Foundation; either version 2 of the
++ *     License, or (at your option) any later version.
++ *
++ *     This library is distributed in the hope that it will be useful,
++ *     but WITHOUT ANY WARRANTY; without even the implied warranty of
++ *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
++ *     GNU General Public License for more details.
++ *
++ * Or, alternatively,
++ *
++ *  b) Permission is hereby granted, free of charge, to any person
++ *     obtaining a copy of this software and associated documentation
++ *     files (the "Software"), to deal in the Software without
++ *     restriction, including without limitation the rights to use,
++ *     copy, modify, merge, publish, distribute, sublicense, and/or
++ *     sell copies of the Software, and to permit persons to whom the
++ *     Software is furnished to do so, subject to the following
++ *     conditions:
++ *
++ *     The above copyright notice and this permission notice shall be
++ *     included in all copies or substantial portions of the Software.
++ *
++ *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
++ *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
++ *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
++ *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
++ *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
++ *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
++ *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
++ *     OTHER DEALINGS IN THE SOFTWARE.
++ */
++
++#include "imx6sx.dtsi"
++
++/ {
++	compatible = "fsl,imx6sx";
++
++	chosen {
++		stdout-path = "serial0:115200n8";
++	};
++
++	leds {
++		compatible = "gpio-leds";
++
++		red {
++			label = "udoo-neo:red:mmc";
++			gpios = <&gpio6 0 GPIO_ACTIVE_HIGH>;
++			default-state = "off";
++			linux,default-trigger = "mmc0";
++		};
++
++		orange {
++			label = "udoo-neo:orange:user";
++			gpios = <&gpio4 6 GPIO_ACTIVE_HIGH>;
++			default-state = "keep";
++		};
++	};
++
++	reg_sdio_pwr: regulator-sdio-pwr {
++		compatible = "regulator-fixed";
++		gpio = <&gpio6 1 GPIO_ACTIVE_HIGH>;
++		enable-active-high;
++		regulator-name = "SDIO_PWR";
++		regulator-min-microvolt = <3300000>;
++		regulator-max-microvolt = <3300000>;
++		regulator-boot-on;
++	};
++};
++
++&cpu0 {
++	arm-supply = <&sw1a_reg>;
++	soc-supply = <&sw1c_reg>;
++};
++
++&fec1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_enet1>;
++	phy-mode = "rmii";
++	phy-reset-gpios = <&gpio2 1 GPIO_ACTIVE_LOW>;
++};
++
++&i2c1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_i2c1>;
++	clock-frequency = <100000>;
++	status = "okay";
++
++	pmic: pmic@08 {
++		compatible = "fsl,pfuze3000";
++		reg = <0x08>;
++
++		regulators {
++			sw1a_reg: sw1a {
++				regulator-min-microvolt = <700000>;
++				regulator-max-microvolt = <1475000>;
++				regulator-boot-on;
++				regulator-always-on;
++				regulator-ramp-delay = <6250>;
++			};
++
++			sw1c_reg: sw1b {
++				regulator-min-microvolt = <700000>;
++				regulator-max-microvolt = <1475000>;
++				regulator-boot-on;
++				regulator-always-on;
++				regulator-ramp-delay = <6250>;
++			};
++
++			sw2_reg: sw2 {
++				regulator-min-microvolt = <1500000>;
++				regulator-max-microvolt = <1850000>;
++				regulator-boot-on;
++				regulator-always-on;
++			};
++
++			sw3a_reg: sw3 {
++				regulator-min-microvolt = <900000>;
++				regulator-max-microvolt = <1650000>;
++				regulator-boot-on;
++				regulator-always-on;
++			};
++
++			swbst_reg: swbst {
++				regulator-min-microvolt = <5000000>;
++				regulator-max-microvolt = <5150000>;
++			};
++
++			snvs_reg: vsnvs {
++				regulator-min-microvolt = <1000000>;
++				regulator-max-microvolt = <3000000>;
++				regulator-boot-on;
++				regulator-always-on;
++			};
++
++			vref_reg: vrefddr {
++				regulator-boot-on;
++				regulator-always-on;
++			};
++
++			vgen1_reg: vldo1 {
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-always-on;
++			};
++
++			vgen2_reg: vldo2 {
++				regulator-min-microvolt = <800000>;
++				regulator-max-microvolt = <1550000>;
++			};
++
++			vgen3_reg: vccsd {
++				regulator-min-microvolt = <2850000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-always-on;
++			};
++
++			vgen4_reg: v33 {
++				regulator-min-microvolt = <2850000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-always-on;
++			};
++
++			vgen5_reg: vldo3 {
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-always-on;
++			};
++
++			vgen6_reg: vldo4 {
++				regulator-min-microvolt = <1800000>;
++				regulator-max-microvolt = <3300000>;
++				regulator-always-on;
++			};
++		};
++	};
++};
++
++&iomuxc {
++	pinctrl_enet1: enet1grp {
++		fsl,pins =
++			<MX6SX_PAD_ENET1_CRS__GPIO2_IO_1	0xa0b1>,
++			<MX6SX_PAD_ENET1_MDC__ENET1_MDC		0xa0b1>,
++			<MX6SX_PAD_ENET1_MDIO__ENET1_MDIO	0xa0b1>,
++			<MX6SX_PAD_RGMII1_TD0__ENET1_TX_DATA_0	0xa0b1>,
++			<MX6SX_PAD_RGMII1_TD1__ENET1_TX_DATA_1	0xa0b1>,
++			<MX6SX_PAD_RGMII1_TX_CTL__ENET1_TX_EN	0xa0b1>,
++
++			<MX6SX_PAD_ENET1_TX_CLK__ENET1_REF_CLK1	0x3081>,
++			<MX6SX_PAD_ENET2_TX_CLK__GPIO2_IO_9	0x3081>,
++			<MX6SX_PAD_RGMII1_RD0__ENET1_RX_DATA_0	0x3081>,
++			<MX6SX_PAD_RGMII1_RD1__ENET1_RX_DATA_1	0x3081>,
++			<MX6SX_PAD_RGMII1_RX_CTL__ENET1_RX_EN	0x3081>,
++			<MX6SX_PAD_RGMII1_RXC__ENET1_RX_ER	0x3081>,
++
++			<MX6SX_PAD_ENET2_RX_CLK__ENET2_REF_CLK_25M	0x91>;
++	};
++
++	pinctrl_i2c1: i2c1grp {
++		fsl,pins =
++			<MX6SX_PAD_GPIO1_IO00__I2C1_SCL		0x4001b8b1>,
++			<MX6SX_PAD_GPIO1_IO01__I2C1_SDA		0x4001b8b1>;
++	};
++
++	pinctrl_uart1: uart1grp {
++		fsl,pins =
++			<MX6SX_PAD_GPIO1_IO04__UART1_TX		0x1b0b1>,
++			<MX6SX_PAD_GPIO1_IO05__UART1_RX		0x1b0b1>;
++	};
++
++	pinctrl_uart2: uart2grp {
++		fsl,pins =
++			<MX6SX_PAD_GPIO1_IO06__UART2_TX		0x1b0b1>,
++			<MX6SX_PAD_GPIO1_IO07__UART2_RX		0x1b0b1>;
++	};
++
++	pinctrl_uart5: uart5grp {
++		fsl,pins =
++			<MX6SX_PAD_SD4_DATA4__UART5_RX		0x1b0b1>,
++			<MX6SX_PAD_SD4_DATA5__UART5_TX		0x1b0b1>;
++	};
++
++	pinctrl_uart6: uart6grp {
++		fsl,pins =
++			<MX6SX_PAD_CSI_DATA00__UART6_RI_B	0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA01__UART6_DSR_B	0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA02__UART6_DTR_B	0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA03__UART6_DCD_B	0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA04__UART6_RX		0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA05__UART6_TX		0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA06__UART6_RTS_B	0x1b0b1>,
++			<MX6SX_PAD_CSI_DATA07__UART6_CTS_B	0x1b0b1>;
++	};
++
++	pinctrl_usdhc2: usdhc2grp {
++		fsl,pins =
++			<MX6SX_PAD_SD2_CMD__USDHC2_CMD		0x17059>,
++			<MX6SX_PAD_SD2_CLK__USDHC2_CLK		0x10059>,
++			<MX6SX_PAD_SD2_DATA0__USDHC2_DATA0	0x17059>,
++			<MX6SX_PAD_SD2_DATA1__USDHC2_DATA1	0x17059>,
++			<MX6SX_PAD_SD2_DATA2__USDHC2_DATA2	0x17059>,
++			<MX6SX_PAD_SD2_DATA3__USDHC2_DATA3	0x17059>,
++			<MX6SX_PAD_SD1_DATA0__GPIO6_IO_2	0x17059>; /* CD */
++	};
++};
++
++&uart1 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_uart1>;
++	status = "okay";
++};
++
++/* Cortex-M4 serial */
++&uart2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_uart2>;
++	status = "disabled";
++};
++
++/* Arduino serial */
++&uart5 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_uart5>;
++	status = "disabled";
++};
++
++&uart6 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_uart6>;
++	uart-has-rtscts;
++	status = "disabled";
++};
++
++&usdhc2 {
++	pinctrl-names = "default";
++	pinctrl-0 = <&pinctrl_usdhc2>;
++	vmmc-supply = <&reg_sdio_pwr>;
++	bus-width = <4>;
++	cd-gpios = <&gpio6 2 GPIO_ACTIVE_LOW>;
++	no-1-8-v;
++	keep-power-in-suspend;
++	wakeup-source;
++	status = "okay";
++};
+-- 
+cgit v0.12

board/via/imx6_vab820/genimage.cfg

@@ -0,0 +1,38 @@
+# Minimal SD card image for the VIA VAB-820 / AMOS-820
+#
+# The SD card must have at least 1 MB free at the beginning.
+# U-Boot is added before the filesystem partitions as is.
+# A FAT boot partition and an Ext4 root filesystem partition are required.
+
+image boot.vfat {
+  vfat {
+    files = {
+      "imx6q-vab820.dtb",
+      "uImage"
+    }
+  }
+  size = 10M
+}
+
+image sdcard.img {
+  hdimage {
+  }
+
+  partition u-boot {
+    in-partition-table = "no"
+    image = "u-boot.imx"
+    offset = 1024
+  }
+
+  partition boot {
+    partition-type = 0xC
+    bootable = "true"
+    image = "boot.vfat"
+  }
+
+  partition rootfs {
+    partition-type = 0x83
+    image = "rootfs.ext4"
+    size = 512M
+  }
+}

board/via/imx6_vab820/post-image.sh

@@ -0,0 +1,17 @@
+#!/bin/bash
+
+BOARD_DIR="$(dirname $0)"
+GENIMAGE_CFG="${BOARD_DIR}/genimage.cfg"
+GENIMAGE_TMP="${BUILD_DIR}/genimage.tmp"
+
+rm -rf "${GENIMAGE_TMP}"
+
+genimage \
+  --rootpath "${TARGET_DIR}" \
+  --tmppath "${GENIMAGE_TMP}" \
+  --inputpath "${BINARIES_DIR}" \
+  --outputpath "${BINARIES_DIR}" \
+  --config "${GENIMAGE_CFG}"
+
+RET=${?}
+exit ${RET}

board/via/imx6_vab820/readme.txt

@@ -0,0 +1,120 @@
+VIA VAB-820/AMOS-820
+====================
+
+This file documents the Buildroot support for the VIA VAB-820 board and
+VIA AMOS-820 system, which are built around a Freescale i.MX6 Quad/Dual SoC.
+The kernel and u-boot is based on the official VIA BSP, which is in turn
+based on the Freescale Linux 3.10.17_1.0.0_ga BSP.
+
+
+Configuring and building Buildroot
+----------------------------------
+
+Start from the defconfig:
+
+  $ make via_imx6_vab820_defconfig
+
+You can edit build options the usual way:
+
+  $ make menuconfig
+
+When you are happy with the setup, run:
+
+  $ make
+
+The result of the build with the default settings should be these files:
+
+  output/images
+  ├── boot.vfat
+  ├── imx6q-vab820.dtb
+  ├── rootfs.ext2
+  ├── rootfs.ext4 -> rootfs.ext2
+  ├── rootfs.tar
+  ├── sdcard.img
+  ├── u-boot.imx
+  └── uImage
+
+Copy the bootable `sdcard.img` onto an SD card with "dd":
+
+  $ sudo dd if=output/images/sdcard.img of=/dev/sdX bs=1M conv=fsync
+
+where "sdX" is the appropriate partition of your card.
+
+For details about the medium image layout, see the definition in
+`board/via/imx6_vab820/genimage.cfg`.
+
+
+Setting up your SD card manually
+--------------------------------
+
+*Important*: pay attention which partition you are modifying so you don't
+accidentally erase the wrong file system, e.g your host computer or your
+external storage!
+
+In the default setup you need to create 2 partitions on your SD card:
+a boot partition and a root partition. In this guide and in the default u-boot
+settings the boot partition is vfat, while the root partition is ext4.
+
+You also need to leave space for u-boot at the beginning of the card, before
+all the partitions.
+
+For example, if your SD card is at /dev/sdX, using fdisk, and starting from
+an empty card, the steps are along these lines:
+
+  # fdisk /dev/sdX
+  n         (new partition)
+  p         (primary partition)
+  1	    (first partition)
+  <return>  (default first sector, should be at least 1MB from the beginning
+             which is 2048 sectors if the sector size is 512KB)
+  +50M      (50MB size, as an example)
+  t         (switch partition type)
+  b         (select "W95 FAT32" type)
+  n         (the second partition)
+  p         (primary partition)
+  2	    (second partition)
+  <return>  (default first sector)
+  <return>  (use all remaining space)
+  p         (print so the partition looks something like this below)
+    Device     Boot  Start      End  Sectors  Size Id Type
+    /dev/sdX1         2048   104447   102400   50M  b W95 FAT32
+    /dev/sdX2       104448 15564799 15460352  7.4G 83 Linux
+  w         (save changes)
+
+After this you need to format the newly created file system:
+
+  # mkfs.vfat -L boot /dev/sdX1
+  # mkfs.ext4 -L rootfs /dev/sdX2
+
+Now the system can be copied onto the card. First copy the u-boot onto
+the region of the card before the first partition (starting from the
+root directory of buildroot):
+
+  # dd if=output/images/u-boot.imx of=/dev/sdX bs=512 seek=2
+
+Mount the first partition /dev/sdX1, and copy the kernel and the
+compiled device tree:
+
+  # cp output/images/uImage /mnt/<BOOT-PARTITION>
+  # cp output/images/imx6q-vab820.dtb /mnt/<BOOT-PARTITION>
+
+Finally, copy the root file system onto the mounted (empty) /dev/sdX2
+rootfs partition:
+
+  # tar xf output/images/rootfs.tar -C /mnt/<ROOTFS-PARTITION>
+
+
+Booting
+-------
+
+To use the on-card u-boot, you need adjust jumper J11 located just next to
+the SD card slot on the VAB-820 board. The correct position for SD card
+boot is jumping the two pins towards the inside of the board.
+
+To modify the default boot parameters compiled into u-boot, you can create
+a boot script with the file name `boot.scr` and place it onto the boot
+partition (same directory as `uImage`).
+
+If you want to have the login prompt on the serial debug line instead of
+the console, adjust the buildroot settings as:
+"System Configuration > getty options > TTY port > ttymxc1"

boot/arm-trusted-firmware/arm-trusted-firmware.mk

@@ -5,7 +5,7 @@
 ################################################################################
 
 ARM_TRUSTED_FIRMWARE_VERSION = $(call qstrip,$(BR2_TARGET_ARM_TRUSTED_FIRMWARE_VERSION))
-ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3-Clause
+ARM_TRUSTED_FIRMWARE_LICENSE = BSD-3c
 ARM_TRUSTED_FIRMWARE_LICENSE_FILES = license.md
 
 ARM_TRUSTED_FIRMWARE_DEPENDENCIES += uboot

boot/barebox/Config.in

@@ -12,7 +12,7 @@ choice
 	  Select the specific Barebox version you want to use
 
 config BR2_TARGET_BAREBOX_LATEST_VERSION
-	bool "2017.02.0"
+	bool "2017.01.0"
 
 config BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	bool "Custom version"
@@ -40,7 +40,7 @@ endif
 
 config BR2_TARGET_BAREBOX_VERSION
 	string
-	default "2017.02.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
+	default "2017.01.0"	if BR2_TARGET_BAREBOX_LATEST_VERSION
 	default BR2_TARGET_BAREBOX_CUSTOM_VERSION_VALUE if BR2_TARGET_BAREBOX_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_BAREBOX_CUSTOM_TARBALL
 	default BR2_TARGET_BAREBOX_CUSTOM_GIT_VERSION if BR2_TARGET_BAREBOX_CUSTOM_GIT

boot/barebox/barebox.hash

@@ -1,5 +1,5 @@
-# http://www.barebox.org/download/barebox-2017.02.0.tar.bz2.md5
-md5 4651f5fa5e794a9739dd71eece0fe702  barebox-2017.02.0.tar.bz2
+# http://www.barebox.org/download/barebox-2017.01.0.tar.bz2.md5
+md5 d2933437885497b09d69d6e6f4beeffc  barebox-2017.01.0.tar.bz2
 
 # Locally calculated
-sha256 d65d864fe598d61ed9c6712e32d50742e6996aae02acaae5955c3b22166344cb  barebox-2017.02.0.tar.bz2
+sha256 ca4cc06bdc7183e3fcb4bed300f1e820df1e022a7b86fdcf64205ddb6a103567  barebox-2017.01.0.tar.bz2

boot/barebox/barebox.mk

@@ -36,7 +36,7 @@ endif
 endif
 
 $(1)_DEPENDENCIES = host-lzop
-$(1)_LICENSE = GPL-2.0 with exceptions
+$(1)_LICENSE = GPLv2 with exceptions
 $(1)_LICENSE_FILES = COPYING
 
 $(1)_CUSTOM_EMBEDDED_ENV_PATH = $$(call qstrip,$$(BR2_TARGET_$(1)_CUSTOM_EMBEDDED_ENV_PATH))

boot/grub/grub.mk

@@ -9,7 +9,7 @@ GRUB_SOURCE = grub_$(GRUB_VERSION).orig.tar.gz
 GRUB_PATCH = grub_$(GRUB_VERSION)-68.diff.gz
 GRUB_SITE = http://snapshot.debian.org/archive/debian/20141023T043132Z/pool/main/g/grub
 
-GRUB_LICENSE = GPL-2.0+
+GRUB_LICENSE = GPLv2+
 GRUB_LICENSE_FILES = COPYING
 
 # Passing -O0 since the default -O2 passed by Buildroot generates

boot/grub2/grub2.mk

@@ -7,7 +7,7 @@
 GRUB2_VERSION = 2.00
 GRUB2_SITE = $(BR2_GNU_MIRROR)/grub
 GRUB2_SOURCE = grub-$(GRUB2_VERSION).tar.xz
-GRUB2_LICENSE = GPL-3.0+
+GRUB2_LICENSE = GPLv3+
 GRUB2_LICENSE_FILES = COPYING
 GRUB2_DEPENDENCIES = host-bison host-flex
 

boot/gummiboot/gummiboot.mk

@@ -7,7 +7,7 @@
 GUMMIBOOT_SITE = http://cgit.freedesktop.org/gummiboot
 GUMMIBOOT_SITE_METHOD = git
 GUMMIBOOT_VERSION = 43
-GUMMIBOOT_LICENSE = LGPL-2.1+
+GUMMIBOOT_LICENSE = LGPLv2.1+
 GUMMIBOOT_LICENSE_FILES = LICENSE
 
 # The git archive does not have the autoconf/automake stuff generated.

boot/mxs-bootlets/mxs-bootlets.mk

@@ -35,7 +35,7 @@ MXS_BOOTLETS_ELFTOSB_OPTIONS += -f imx28
 endif
 
 MXS_BOOTLETS_DEPENDENCIES = host-elftosb
-MXS_BOOTLETS_LICENSE = GPL-2.0+
+MXS_BOOTLETS_LICENSE = GPLv2+
 
 ifeq ($(BR2_TARGET_MXS_BOOTLETS_BAREBOX),y)
 MXS_BOOTLETS_DEPENDENCIES += barebox

boot/syslinux/syslinux.mk

@@ -8,7 +8,7 @@ SYSLINUX_VERSION = 6.03
 SYSLINUX_SOURCE = syslinux-$(SYSLINUX_VERSION).tar.xz
 SYSLINUX_SITE = $(BR2_KERNEL_MIRROR)/linux/utils/boot/syslinux
 
-SYSLINUX_LICENSE = GPL-2.0+
+SYSLINUX_LICENSE = GPLv2+
 SYSLINUX_LICENSE_FILES = COPYING
 
 SYSLINUX_INSTALL_IMAGES = YES

boot/ts4800-mbrboot/ts4800-mbrboot.mk

@@ -6,7 +6,7 @@
 
 TS4800_MBRBOOT_VERSION = cf8f7072ed5a4a4e48fcb9841b2e31e519ec5dca
 TS4800_MBRBOOT_SITE = $(call github,embeddedarm,ts4800-mbrboot,$(TS4800_MBRBOOT_VERSION))
-TS4800_MBRBOOT_LICENSE = BSD-2-Clause
+TS4800_MBRBOOT_LICENSE = BSD-2c
 TS4800_MBRBOOT_LICENSE_FILES = LICENSE
 TS4800_MBRBOOT_INSTALL_IMAGES = YES
 

boot/uboot/Config.in

@@ -38,7 +38,7 @@ choice
 	  Select the specific U-Boot version you want to use
 
 config BR2_TARGET_UBOOT_LATEST_VERSION
-	bool "2017.03"
+	bool "2017.01"
 
 config BR2_TARGET_UBOOT_CUSTOM_VERSION
 	bool "Custom version"
@@ -86,7 +86,7 @@ endif
 
 config BR2_TARGET_UBOOT_VERSION
 	string
-	default "2017.03"	if BR2_TARGET_UBOOT_LATEST_VERSION
+	default "2017.01"	if BR2_TARGET_UBOOT_LATEST_VERSION
 	default BR2_TARGET_UBOOT_CUSTOM_VERSION_VALUE \
 		if BR2_TARGET_UBOOT_CUSTOM_VERSION
 	default "custom"	if BR2_TARGET_UBOOT_CUSTOM_TARBALL
@@ -159,9 +159,6 @@ config BR2_TARGET_UBOOT_FORMAT_BIN
 	bool "u-boot.bin"
 	default y
 
-config BR2_TARGET_UBOOT_FORMAT_DTB_BIN
-	bool "u-boot-dtb.bin"
-
 config BR2_TARGET_UBOOT_FORMAT_DTB_IMG
 	bool "u-boot-dtb.img"
 
@@ -327,8 +324,8 @@ config BR2_TARGET_UBOOT_SPL_NAME
 	depends on BR2_TARGET_UBOOT_SPL
 	help
 	  A space-separated list of SPL binaries, generated during
-	  u-boot build. For most platform it is spl/u-boot-spl.bin but
-	  not always. It is MLO on OMAP and SPL on i.MX6 for example.
+	  u-boot build. For most platform it is spl/u-boot-spl.bin
+	  but not always. It is MLO on OMAP for example.
 
 config BR2_TARGET_UBOOT_ZYNQ_IMAGE
 	bool "Generate image for Xilinx Zynq"
@@ -343,29 +340,13 @@ config BR2_TARGET_UBOOT_ZYNQ_IMAGE
 	  to be set.
 
 config BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC
-	bool "CRC image for Altera SoC FPGA (mkpimage)"
+	bool "CRC SPL image for Altera SoC FPGA"
 	depends on BR2_arm
-	depends on BR2_TARGET_UBOOT_SPL || BR2_TARGET_UBOOT_FORMAT_DTB_BIN
+	depends on BR2_TARGET_UBOOT_SPL
 	help
-	  Pass the U-Boot image through the mkpimage tool to enable
+	  Generate SPL image fixed by the mkpimage tool to enable
 	  booting on the Altera SoC FPGA based platforms.
 
-	  On some platforms, it's the SPL that needs to be passed
-	  through mkpimage. On some other platforms there is no SPL
-	  because the internal SRAM is big enough to store the full
-	  U-Boot. In this case, it's directly the full U-Boot image
-	  that is passed through mkpimage.
-
-	  If BR2_TARGET_UBOOT_SPL is enabled then
-	  BR2_TARGET_UBOOT_SPL_NAME is converted by mkpimage using
-	  header version 0.
-
-	  Otherwise the full u-boot-dtb.bin is converted using
-	  mkpimage header version 1.
-
-	  In either case the resulting file will be given a .crc
-	  extension.
-
 menuconfig BR2_TARGET_UBOOT_ENVIMAGE
 	bool "Environment image"
 	help
@@ -407,18 +388,4 @@ config BR2_TARGET_UBOOT_ENVIMAGE_REDUNDANT
 
 endif # BR2_TARGET_UBOOT_ENVIMAGE
 
-if BR2_TARGET_UBOOT_BUILD_SYSTEM_KCONFIG
-
-config BR2_TARGET_UBOOT_CUSTOM_DTS_PATH
-	string "Device Tree Source file paths"
-	help
-	  Space-separated list of paths to device tree source files
-	  that will be copied to arch/ARCH/dts/ before starting the
-	  build.
-
-	  To use this device tree source file, the U-Boot configuration
-	  file must refer to it.
-
-endif
-
 endif # BR2_TARGET_UBOOT

boot/uboot/uboot.hash

@@ -1,2 +1,2 @@
 # Locally computed:
-sha256  f54baf3f9325bf444c7905f3a5b6f83680edb1e6e1a4d5f8a5ad80abe885113f  u-boot-2017.03.tar.bz2
+sha256  6c425175f93a4bcf2ec9faf5658ef279633dbd7856a293d95bd1ff516528ecf2  u-boot-2017.01.tar.bz2

boot/uboot/uboot.mk

@@ -7,7 +7,7 @@
 UBOOT_VERSION = $(call qstrip,$(BR2_TARGET_UBOOT_VERSION))
 UBOOT_BOARD_NAME = $(call qstrip,$(BR2_TARGET_UBOOT_BOARDNAME))
 
-UBOOT_LICENSE = GPL-2.0+
+UBOOT_LICENSE = GPLv2+
 UBOOT_LICENSE_FILES = Licenses/gpl-2.0.txt
 
 UBOOT_INSTALL_IMAGES = YES
@@ -74,11 +74,6 @@ UBOOT_BINS += u-boot-dtb.img
 UBOOT_MAKE_TARGET += u-boot-dtb.img
 endif
 
-ifeq ($(BR2_TARGET_UBOOT_FORMAT_DTB_BIN),y)
-UBOOT_BINS += u-boot-dtb.bin
-UBOOT_MAKE_TARGET += u-boot-dtb.bin
-endif
-
 ifeq ($(BR2_TARGET_UBOOT_FORMAT_IMG),y)
 UBOOT_BINS += u-boot.img
 UBOOT_MAKE_TARGET += u-boot.img
@@ -194,12 +189,7 @@ define UBOOT_HELP_CMDS
 endef
 endif # BR2_TARGET_UBOOT_BUILD_SYSTEM_LEGACY
 
-UBOOT_CUSTOM_DTS_PATH = $(call qstrip,$(BR2_TARGET_UBOOT_CUSTOM_DTS_PATH))
-
 define UBOOT_BUILD_CMDS
-	$(if $(UBOOT_CUSTOM_DTS_PATH),
-		cp -f $(UBOOT_CUSTOM_DTS_PATH) $(@D)/arch/$(UBOOT_ARCH)/dts/
-	)
 	$(TARGET_CONFIGURE_OPTS) 	\
 		$(MAKE) -C $(@D) $(UBOOT_MAKE_OPTS) 		\
 		$(UBOOT_MAKE_TARGET)
@@ -267,17 +257,9 @@ UBOOT_POST_INSTALL_IMAGES_HOOKS += UBOOT_GENERATE_ZYNQ_IMAGE
 endif
 
 ifeq ($(BR2_TARGET_UBOOT_ALTERA_SOCFPGA_IMAGE_CRC),y)
-ifeq ($(BR2_TARGET_UBOOT_SPL),y)
-UBOOT_CRC_ALTERA_SOCFPGA_INPUT_IMAGES = $(call qstrip,$(BR2_TARGET_UBOOT_SPL_NAME))
-UBOOT_CRC_ALTERA_SOCFPGA_HEADER_VERSION = 0
-else
-UBOOT_CRC_ALTERA_SOCFPGA_INPUT_IMAGES = u-boot-dtb.bin
-UBOOT_CRC_ALTERA_SOCFPGA_HEADER_VERSION = 1
-endif
 define UBOOT_CRC_ALTERA_SOCFPGA_IMAGE
-	$(foreach f,$(UBOOT_CRC_ALTERA_SOCFPGA_INPUT_IMAGES), \
+	$(foreach f,$(call qstrip,$(BR2_TARGET_UBOOT_SPL_NAME)), \
 		$(HOST_DIR)/usr/bin/mkpimage \
-			-v $(UBOOT_CRC_ALTERA_SOCFPGA_HEADER_VERSION) \
 			-o $(BINARIES_DIR)/$(notdir $(call qstrip,$(f))).crc \
 			$(@D)/$(call qstrip,$(f))
 	)

boot/xloader/xloader.mk

@@ -8,7 +8,7 @@ XLOADER_VERSION = 6f3a26101303051e0f91b6213735b68ce804e94e
 XLOADER_SITE = git://gitorious.org/x-loader/x-loader.git
 XLOADER_BOARD_NAME = $(call qstrip,$(BR2_TARGET_XLOADER_BOARDNAME))
 
-XLOADER_LICENSE = GPL-2.0+
+XLOADER_LICENSE = GPLv2+
 XLOADER_LICENSE_FILES = README
 
 XLOADER_INSTALL_IMAGES = YES

configs/altera_socdk_defconfig

@@ -0,0 +1,33 @@
+BR2_arm=y
+BR2_cortex_a9=y
+
+BR2_ARM_ENABLE_VFP=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_FPU_NEON=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+
+# Linux headers same as kernel, a 3.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
+
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_LINUX_KERNEL_INTREE_DTS_NAME)"
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="http://git.rocketboards.org/linux-socfpga.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-3.13_14.02.02"
+BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_socdk"
+
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_3=y
+
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="http://git.rocketboards.org/u-boot-socfpga.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_socfpga_v2013.01.01_14.02.02"
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"

configs/altera_sockit_defconfig

@@ -0,0 +1,37 @@
+BR2_arm=y
+BR2_cortex_a9=y
+
+BR2_ARM_ENABLE_VFP=y
+BR2_ARM_ENABLE_NEON=y
+BR2_ARM_FPU_NEON=y
+BR2_ARM_INSTRUCTIONS_THUMB2=y
+
+# Linux headers same as kernel, a 3.13 series
+BR2_PACKAGE_HOST_LINUX_HEADERS_CUSTOM_3_13=y
+
+BR2_TARGET_GENERIC_GETTY_BAUDRATE_57600=y
+BR2_ROOTFS_POST_IMAGE_SCRIPT="board/altera/post-image.sh"
+BR2_ROOTFS_POST_SCRIPT_ARGS="$(BR2_LINUX_KERNEL_INTREE_DTS_NAME)"
+
+BR2_LINUX_KERNEL=y
+BR2_LINUX_KERNEL_CUSTOM_GIT=y
+BR2_LINUX_KERNEL_CUSTOM_REPO_URL="http://git.rocketboards.org/linux-socfpga.git"
+BR2_LINUX_KERNEL_CUSTOM_REPO_VERSION="rel_socfpga-3.13_14.02.02"
+BR2_LINUX_KERNEL_DEFCONFIG="socfpga"
+BR2_LINUX_KERNEL_UIMAGE=y
+BR2_LINUX_KERNEL_UIMAGE_LOADADDR="0x8000"
+BR2_LINUX_KERNEL_DTS_SUPPORT=y
+BR2_LINUX_KERNEL_INTREE_DTS_NAME="socfpga_cyclone5_sockit"
+
+BR2_TARGET_ROOTFS_EXT2=y
+BR2_TARGET_ROOTFS_EXT2_3=y
+
+BR2_TARGET_UBOOT=y
+BR2_TARGET_UBOOT_BOARDNAME="socfpga_cyclone5"
+BR2_TARGET_UBOOT_CUSTOM_GIT=y
+BR2_TARGET_UBOOT_CUSTOM_REPO_URL="http://git.rocketboards.org/u-boot-socfpga.git"
+BR2_TARGET_UBOOT_CUSTOM_REPO_VERSION="rel_acds13.0sp1"
+BR2_TARGET_UBOOT_PATCH="board/altera/sockit"
+BR2_TARGET_UBOOT_FORMAT_IMG=y
+BR2_TARGET_UBOOT_SPL=y
+BR2_TARGET_UBOOT_SPL_NAME="spl/u-boot-spl.bin"

configs/armadeus_apf9328_defconfig

@@ -6,6 +6,7 @@ BR2_arm920t=y
 BR2_PACKAGE_GDB=y
 BR2_PACKAGE_HOST_GDB=y
 BR2_ENABLE_LOCALE_PURGE=y
+BR2_TOOLCHAIN_BUILDROOT_INET_RPC=y
 BR2_TOOLCHAIN_BUILDROOT_LOCALE=y
 BR2_TOOLCHAIN_BUILDROOT_CXX=y